+2005-01-11 Andrew Cagney <cagney@gnu.org>
+
+ * Makefile.in (autoconf-common autoheader-common): Add --force to
+ autoconf and autoheader.
+ (autoconf-common autoheader-common)
+ (autoconf-install autoheader-install): Check for configure.ac, not
+ configure.in.
+ * configure.ac: Delete AC_CONFIG_AUX_DIR.
+ * configure: Re-generate.
+
2005-01-07 Andrew Cagney <cagney@gnu.org>
* configure.ac: Replace configure.in. Requires autoconf 2.59 and
autoconf-common autoheader-common:
for d in * ; \
do \
- if [ -d $$d -a -f $$d/configure.in ] ; \
+ if [ -d $$d -a -f $$d/configure.ac ] ; \
then \
echo "Running autoconf in $$d ..." ; \
- (cd $$d && autoconf) ; \
+ (cd $$d && autoconf --force) ; \
if [ $@ = autoheader-common ] ; \
then \
echo "Running autoheader in $$d ..." ; \
- (cd $$d && autoheader) ; \
+ (cd $$d && autoheader --force) ; \
fi ; \
fi ; \
done
echo "$$date $$name $$id@$$host" ; \
for d in * ; \
do \
- if [ -d $$d -a -f $$d/configure.in ] ; \
+ if [ -d $$d -a -f $$d/configure.ac ] ; \
then \
echo "Creating new-$(ChangeLog) in $$d ..." ; \
( echo "$$date $$name <$$id@$$host>" ; \
autoconf-install autoheader-install:
for d in * ; \
do \
- if [ -d $$d -a -f $$d/configure.in ] ; \
+ if [ -d $$d -a -f $$d/configure.ac ] ; \
then \
echo "Moving $$d/new-$(ChangeLog) to $$d/$(ChangeLog) ..." ; \
mv $$d/new-$(ChangeLog) $$d/$(ChangeLog) ; \
+2005-01-11 Andrew Cagney <cagney@localhost.localdomain>
+
+ * configure: Regenerated to track ../common/aclocal.m4 changes.
+
2005-01-07 Andrew Cagney <cagney@gnu.org>
* configure.ac: Rename configure.in, require autoconf 2.59.
+ac_aux_dir=
+for ac_dir in $srcdir $srcdir/.. $srcdir/../..; do
+ if test -f $ac_dir/install-sh; then
+ ac_aux_dir=$ac_dir
+ ac_install_sh="$ac_aux_dir/install-sh -c"
+ break
+ elif test -f $ac_dir/install.sh; then
+ ac_aux_dir=$ac_dir
+ ac_install_sh="$ac_aux_dir/install.sh -c"
+ break
+ elif test -f $ac_dir/shtool; then
+ ac_aux_dir=$ac_dir
+ ac_install_sh="$ac_aux_dir/shtool install -c"
+ break
+ fi
+done
+if test -z "$ac_aux_dir"; then
+ { { echo "$as_me:$LINENO: error: cannot find install-sh or install.sh in $srcdir $srcdir/.. $srcdir/../.." >&5
+echo "$as_me: error: cannot find install-sh or install.sh in $srcdir $srcdir/.. $srcdir/../.." >&2;}
+ { (exit 1); exit 1; }; }
+fi
+ac_config_guess="$SHELL $ac_aux_dir/config.guess"
+ac_config_sub="$SHELL $ac_aux_dir/config.sub"
+ac_configure="$SHELL $ac_aux_dir/configure" # This should be Cygnus configure.
+
# Make sure we can run config.sub.
$ac_config_sub sun4 >/dev/null 2>&1 ||
{ { echo "$as_me:$LINENO: error: cannot run $ac_config_sub" >&5
# autoconf.info says this should be called right after AC_INIT.
ac_config_headers="$ac_config_headers config.h:config.in"
-
-ac_aux_dir=
-for ac_dir in `cd $srcdir;pwd`/../.. $srcdir/`cd $srcdir;pwd`/../..; do
- if test -f $ac_dir/install-sh; then
- ac_aux_dir=$ac_dir
- ac_install_sh="$ac_aux_dir/install-sh -c"
- break
- elif test -f $ac_dir/install.sh; then
- ac_aux_dir=$ac_dir
- ac_install_sh="$ac_aux_dir/install.sh -c"
- break
- elif test -f $ac_dir/shtool; then
- ac_aux_dir=$ac_dir
- ac_install_sh="$ac_aux_dir/shtool install -c"
- break
- fi
-done
-if test -z "$ac_aux_dir"; then
- { { echo "$as_me:$LINENO: error: cannot find install-sh or install.sh in \`cd $srcdir;pwd\`/../.. $srcdir/\`cd $srcdir;pwd\`/../.." >&5
-echo "$as_me: error: cannot find install-sh or install.sh in \`cd $srcdir;pwd\`/../.. $srcdir/\`cd $srcdir;pwd\`/../.." >&2;}
- { (exit 1); exit 1; }; }
-fi
-ac_config_guess="$SHELL $ac_aux_dir/config.guess"
-ac_config_sub="$SHELL $ac_aux_dir/config.sub"
-ac_configure="$SHELL $ac_aux_dir/configure" # This should be Cygnus configure.
-
echo "$as_me:$LINENO: checking target system type" >&5
echo $ECHO_N "checking target system type... $ECHO_C" >&6
if test "${ac_cv_target+set}" = set; then
cgen_breaks="break cgen_rtx_error";
fi
- ac_config_files="$ac_config_files Makefile.sim:Makefile.in Make-common.sim:../common/Make-common.in .gdbinit:../common/gdbinit.in"
- ac_config_commands="$ac_config_commands default"
+ ac_config_files="$ac_config_files Makefile.sim:Makefile.in"
+
+ ac_config_files="$ac_config_files Make-common.sim:../common/Make-common.in"
+
+ ac_config_files="$ac_config_files .gdbinit:../common/gdbinit.in"
+
+ ac_config_commands="$ac_config_commands Makefile"
+
+ ac_config_commands="$ac_config_commands stamp-h"
+
cat >confcache <<\_ACEOF
# This file is a shell script that caches the results of configure
# tests run on this system so they can be shared between configure
"Make-common.sim" ) CONFIG_FILES="$CONFIG_FILES Make-common.sim:../common/Make-common.in" ;;
".gdbinit" ) CONFIG_FILES="$CONFIG_FILES .gdbinit:../common/gdbinit.in" ;;
"$ac_config_links_1" ) CONFIG_LINKS="$CONFIG_LINKS $ac_config_links_1" ;;
- "default" ) CONFIG_COMMANDS="$CONFIG_COMMANDS default" ;;
+ "Makefile" ) CONFIG_COMMANDS="$CONFIG_COMMANDS Makefile" ;;
+ "stamp-h" ) CONFIG_COMMANDS="$CONFIG_COMMANDS stamp-h" ;;
"config.h" ) CONFIG_HEADERS="$CONFIG_HEADERS config.h:config.in" ;;
*) { { echo "$as_me:$LINENO: error: invalid argument: $ac_config_target" >&5
echo "$as_me: error: invalid argument: $ac_config_target" >&2;}
{ echo "$as_me:$LINENO: executing $ac_dest commands" >&5
echo "$as_me: executing $ac_dest commands" >&6;}
case $ac_dest in
- default ) case "x$CONFIG_FILES" in
- xMakefile*)
- echo "Merging Makefile.sim+Make-common.sim into Makefile ..."
- rm -f Makesim1.tmp Makesim2.tmp Makefile
- sed -n -e '/^## COMMON_PRE_/,/^## End COMMON_PRE_/ p' <Make-common.sim >Makesim1.tmp
- sed -n -e '/^## COMMON_POST_/,/^## End COMMON_POST_/ p' <Make-common.sim >Makesim2.tmp
- sed -e '/^## COMMON_PRE_/ r Makesim1.tmp' \
+ Makefile ) echo "Merging Makefile.sim+Make-common.sim into Makefile ..."
+ rm -f Makesim1.tmp Makesim2.tmp Makefile
+ sed -n -e '/^## COMMON_PRE_/,/^## End COMMON_PRE_/ p' <Make-common.sim >Makesim1.tmp
+ sed -n -e '/^## COMMON_POST_/,/^## End COMMON_POST_/ p' <Make-common.sim >Makesim2.tmp
+ sed -e '/^## COMMON_PRE_/ r Makesim1.tmp' \
-e '/^## COMMON_POST_/ r Makesim2.tmp' \
<Makefile.sim >Makefile
- rm -f Makefile.sim Make-common.sim Makesim1.tmp Makesim2.tmp
- ;;
- esac
- case "x$CONFIG_HEADERS" in xconfig.h:config.in) echo > stamp-h ;; esac
+ rm -f Makefile.sim Make-common.sim Makesim1.tmp Makesim2.tmp
;;
+ stamp-h ) echo > stamp-h ;;
esac
done
_ACEOF
+2005-01-11 Andrew Cagney <cagney@localhost.localdomain>
+
+ * aclocal.m4 (SIM_AC_OUTPUT): Rewrite to use 2.59 macros.
+ * configure: Regenerated to track ../common/aclocal.m4 changes.
+
2005-01-07 Andrew Cagney <cagney@gnu.org>
* configure.ac: Rename configure.in, require autoconf 2.59.
cgen_breaks="break cgen_rtx_error";
fi
AC_SUBST(cgen_breaks)
-AC_OUTPUT(Makefile.sim:Makefile.in Make-common.sim:../common/Make-common.in .gdbinit:../common/gdbinit.in,
-[case "x$CONFIG_FILES" in
- xMakefile*)
- echo "Merging Makefile.sim+Make-common.sim into Makefile ..."
- rm -f Makesim1.tmp Makesim2.tmp Makefile
- sed -n -e '/^## COMMON_PRE_/,/^## End COMMON_PRE_/ p' <Make-common.sim >Makesim1.tmp
- sed -n -e '/^## COMMON_POST_/,/^## End COMMON_POST_/ p' <Make-common.sim >Makesim2.tmp
- sed -e '/^## COMMON_PRE_/ r Makesim1.tmp' \
+AC_CONFIG_FILES(Makefile.sim:Makefile.in)
+AC_CONFIG_FILES(Make-common.sim:../common/Make-common.in)
+AC_CONFIG_FILES(.gdbinit:../common/gdbinit.in)
+AC_CONFIG_COMMANDS([Makefile],
+[echo "Merging Makefile.sim+Make-common.sim into Makefile ..."
+ rm -f Makesim1.tmp Makesim2.tmp Makefile
+ sed -n -e '/^## COMMON_PRE_/,/^## End COMMON_PRE_/ p' <Make-common.sim >Makesim1.tmp
+ sed -n -e '/^## COMMON_POST_/,/^## End COMMON_POST_/ p' <Make-common.sim >Makesim2.tmp
+ sed -e '/^## COMMON_PRE_/ r Makesim1.tmp' \
-e '/^## COMMON_POST_/ r Makesim2.tmp' \
<Makefile.sim >Makefile
- rm -f Makefile.sim Make-common.sim Makesim1.tmp Makesim2.tmp
- ;;
- esac
- case "x$CONFIG_HEADERS" in xconfig.h:config.in) echo > stamp-h ;; esac
+ rm -f Makefile.sim Make-common.sim Makesim1.tmp Makesim2.tmp
])
+AC_CONFIG_COMMANDS([stamp-h], [echo > stamp-h])
+AC_OUTPUT
])
# This file is derived from `gettext.m4'. The difference is that the
AC_CHECK_TOOL(AR, ar)
AC_CHECK_TOOL(RANLIB, ranlib, :)
-AC_CONFIG_AUX_DIR(`cd $srcdir;pwd`/..)
AC_CANONICAL_SYSTEM
AC_ARG_PROGRAM
AC_PROG_CC
+2005-01-11 Andrew Cagney <cagney@localhost.localdomain>
+
+ * configure: Regenerated to track ../common/aclocal.m4 changes.
+
2005-01-07 Andrew Cagney <cagney@gnu.org>
* configure.ac: Rename configure.in, require autoconf 2.59.
+ac_aux_dir=
+for ac_dir in $srcdir $srcdir/.. $srcdir/../..; do
+ if test -f $ac_dir/install-sh; then
+ ac_aux_dir=$ac_dir
+ ac_install_sh="$ac_aux_dir/install-sh -c"
+ break
+ elif test -f $ac_dir/install.sh; then
+ ac_aux_dir=$ac_dir
+ ac_install_sh="$ac_aux_dir/install.sh -c"
+ break
+ elif test -f $ac_dir/shtool; then
+ ac_aux_dir=$ac_dir
+ ac_install_sh="$ac_aux_dir/shtool install -c"
+ break
+ fi
+done
+if test -z "$ac_aux_dir"; then
+ { { echo "$as_me:$LINENO: error: cannot find install-sh or install.sh in $srcdir $srcdir/.. $srcdir/../.." >&5
+echo "$as_me: error: cannot find install-sh or install.sh in $srcdir $srcdir/.. $srcdir/../.." >&2;}
+ { (exit 1); exit 1; }; }
+fi
+ac_config_guess="$SHELL $ac_aux_dir/config.guess"
+ac_config_sub="$SHELL $ac_aux_dir/config.sub"
+ac_configure="$SHELL $ac_aux_dir/configure" # This should be Cygnus configure.
+
# Make sure we can run config.sub.
$ac_config_sub sun4 >/dev/null 2>&1 ||
{ { echo "$as_me:$LINENO: error: cannot run $ac_config_sub" >&5
# autoconf.info says this should be called right after AC_INIT.
ac_config_headers="$ac_config_headers config.h:config.in"
-
-ac_aux_dir=
-for ac_dir in `cd $srcdir;pwd`/../.. $srcdir/`cd $srcdir;pwd`/../..; do
- if test -f $ac_dir/install-sh; then
- ac_aux_dir=$ac_dir
- ac_install_sh="$ac_aux_dir/install-sh -c"
- break
- elif test -f $ac_dir/install.sh; then
- ac_aux_dir=$ac_dir
- ac_install_sh="$ac_aux_dir/install.sh -c"
- break
- elif test -f $ac_dir/shtool; then
- ac_aux_dir=$ac_dir
- ac_install_sh="$ac_aux_dir/shtool install -c"
- break
- fi
-done
-if test -z "$ac_aux_dir"; then
- { { echo "$as_me:$LINENO: error: cannot find install-sh or install.sh in \`cd $srcdir;pwd\`/../.. $srcdir/\`cd $srcdir;pwd\`/../.." >&5
-echo "$as_me: error: cannot find install-sh or install.sh in \`cd $srcdir;pwd\`/../.. $srcdir/\`cd $srcdir;pwd\`/../.." >&2;}
- { (exit 1); exit 1; }; }
-fi
-ac_config_guess="$SHELL $ac_aux_dir/config.guess"
-ac_config_sub="$SHELL $ac_aux_dir/config.sub"
-ac_configure="$SHELL $ac_aux_dir/configure" # This should be Cygnus configure.
-
echo "$as_me:$LINENO: checking target system type" >&5
echo $ECHO_N "checking target system type... $ECHO_C" >&6
if test "${ac_cv_target+set}" = set; then
cgen_breaks="break cgen_rtx_error";
fi
- ac_config_files="$ac_config_files Makefile.sim:Makefile.in Make-common.sim:../common/Make-common.in .gdbinit:../common/gdbinit.in"
- ac_config_commands="$ac_config_commands default"
+ ac_config_files="$ac_config_files Makefile.sim:Makefile.in"
+
+ ac_config_files="$ac_config_files Make-common.sim:../common/Make-common.in"
+
+ ac_config_files="$ac_config_files .gdbinit:../common/gdbinit.in"
+
+ ac_config_commands="$ac_config_commands Makefile"
+
+ ac_config_commands="$ac_config_commands stamp-h"
+
cat >confcache <<\_ACEOF
# This file is a shell script that caches the results of configure
# tests run on this system so they can be shared between configure
"Make-common.sim" ) CONFIG_FILES="$CONFIG_FILES Make-common.sim:../common/Make-common.in" ;;
".gdbinit" ) CONFIG_FILES="$CONFIG_FILES .gdbinit:../common/gdbinit.in" ;;
"$ac_config_links_1" ) CONFIG_LINKS="$CONFIG_LINKS $ac_config_links_1" ;;
- "default" ) CONFIG_COMMANDS="$CONFIG_COMMANDS default" ;;
+ "Makefile" ) CONFIG_COMMANDS="$CONFIG_COMMANDS Makefile" ;;
+ "stamp-h" ) CONFIG_COMMANDS="$CONFIG_COMMANDS stamp-h" ;;
"config.h" ) CONFIG_HEADERS="$CONFIG_HEADERS config.h:config.in" ;;
*) { { echo "$as_me:$LINENO: error: invalid argument: $ac_config_target" >&5
echo "$as_me: error: invalid argument: $ac_config_target" >&2;}
{ echo "$as_me:$LINENO: executing $ac_dest commands" >&5
echo "$as_me: executing $ac_dest commands" >&6;}
case $ac_dest in
- default ) case "x$CONFIG_FILES" in
- xMakefile*)
- echo "Merging Makefile.sim+Make-common.sim into Makefile ..."
- rm -f Makesim1.tmp Makesim2.tmp Makefile
- sed -n -e '/^## COMMON_PRE_/,/^## End COMMON_PRE_/ p' <Make-common.sim >Makesim1.tmp
- sed -n -e '/^## COMMON_POST_/,/^## End COMMON_POST_/ p' <Make-common.sim >Makesim2.tmp
- sed -e '/^## COMMON_PRE_/ r Makesim1.tmp' \
+ Makefile ) echo "Merging Makefile.sim+Make-common.sim into Makefile ..."
+ rm -f Makesim1.tmp Makesim2.tmp Makefile
+ sed -n -e '/^## COMMON_PRE_/,/^## End COMMON_PRE_/ p' <Make-common.sim >Makesim1.tmp
+ sed -n -e '/^## COMMON_POST_/,/^## End COMMON_POST_/ p' <Make-common.sim >Makesim2.tmp
+ sed -e '/^## COMMON_PRE_/ r Makesim1.tmp' \
-e '/^## COMMON_POST_/ r Makesim2.tmp' \
<Makefile.sim >Makefile
- rm -f Makefile.sim Make-common.sim Makesim1.tmp Makesim2.tmp
- ;;
- esac
- case "x$CONFIG_HEADERS" in xconfig.h:config.in) echo > stamp-h ;; esac
+ rm -f Makefile.sim Make-common.sim Makesim1.tmp Makesim2.tmp
;;
+ stamp-h ) echo > stamp-h ;;
esac
done
_ACEOF
+2005-01-11 Andrew Cagney <cagney@localhost.localdomain>
+
+ * configure: Regenerated to track ../common/aclocal.m4 changes.
+
2005-01-07 Andrew Cagney <cagney@gnu.org>
* configure.ac: Rename configure.in, require autoconf 2.59.
+ac_aux_dir=
+for ac_dir in $srcdir $srcdir/.. $srcdir/../..; do
+ if test -f $ac_dir/install-sh; then
+ ac_aux_dir=$ac_dir
+ ac_install_sh="$ac_aux_dir/install-sh -c"
+ break
+ elif test -f $ac_dir/install.sh; then
+ ac_aux_dir=$ac_dir
+ ac_install_sh="$ac_aux_dir/install.sh -c"
+ break
+ elif test -f $ac_dir/shtool; then
+ ac_aux_dir=$ac_dir
+ ac_install_sh="$ac_aux_dir/shtool install -c"
+ break
+ fi
+done
+if test -z "$ac_aux_dir"; then
+ { { echo "$as_me:$LINENO: error: cannot find install-sh or install.sh in $srcdir $srcdir/.. $srcdir/../.." >&5
+echo "$as_me: error: cannot find install-sh or install.sh in $srcdir $srcdir/.. $srcdir/../.." >&2;}
+ { (exit 1); exit 1; }; }
+fi
+ac_config_guess="$SHELL $ac_aux_dir/config.guess"
+ac_config_sub="$SHELL $ac_aux_dir/config.sub"
+ac_configure="$SHELL $ac_aux_dir/configure" # This should be Cygnus configure.
+
# Make sure we can run config.sub.
$ac_config_sub sun4 >/dev/null 2>&1 ||
{ { echo "$as_me:$LINENO: error: cannot run $ac_config_sub" >&5
# autoconf.info says this should be called right after AC_INIT.
ac_config_headers="$ac_config_headers config.h:config.in"
-
-ac_aux_dir=
-for ac_dir in `cd $srcdir;pwd`/../.. $srcdir/`cd $srcdir;pwd`/../..; do
- if test -f $ac_dir/install-sh; then
- ac_aux_dir=$ac_dir
- ac_install_sh="$ac_aux_dir/install-sh -c"
- break
- elif test -f $ac_dir/install.sh; then
- ac_aux_dir=$ac_dir
- ac_install_sh="$ac_aux_dir/install.sh -c"
- break
- elif test -f $ac_dir/shtool; then
- ac_aux_dir=$ac_dir
- ac_install_sh="$ac_aux_dir/shtool install -c"
- break
- fi
-done
-if test -z "$ac_aux_dir"; then
- { { echo "$as_me:$LINENO: error: cannot find install-sh or install.sh in \`cd $srcdir;pwd\`/../.. $srcdir/\`cd $srcdir;pwd\`/../.." >&5
-echo "$as_me: error: cannot find install-sh or install.sh in \`cd $srcdir;pwd\`/../.. $srcdir/\`cd $srcdir;pwd\`/../.." >&2;}
- { (exit 1); exit 1; }; }
-fi
-ac_config_guess="$SHELL $ac_aux_dir/config.guess"
-ac_config_sub="$SHELL $ac_aux_dir/config.sub"
-ac_configure="$SHELL $ac_aux_dir/configure" # This should be Cygnus configure.
-
echo "$as_me:$LINENO: checking target system type" >&5
echo $ECHO_N "checking target system type... $ECHO_C" >&6
if test "${ac_cv_target+set}" = set; then
cgen_breaks="break cgen_rtx_error";
fi
- ac_config_files="$ac_config_files Makefile.sim:Makefile.in Make-common.sim:../common/Make-common.in .gdbinit:../common/gdbinit.in"
- ac_config_commands="$ac_config_commands default"
+ ac_config_files="$ac_config_files Makefile.sim:Makefile.in"
+
+ ac_config_files="$ac_config_files Make-common.sim:../common/Make-common.in"
+
+ ac_config_files="$ac_config_files .gdbinit:../common/gdbinit.in"
+
+ ac_config_commands="$ac_config_commands Makefile"
+
+ ac_config_commands="$ac_config_commands stamp-h"
+
cat >confcache <<\_ACEOF
# This file is a shell script that caches the results of configure
# tests run on this system so they can be shared between configure
"Make-common.sim" ) CONFIG_FILES="$CONFIG_FILES Make-common.sim:../common/Make-common.in" ;;
".gdbinit" ) CONFIG_FILES="$CONFIG_FILES .gdbinit:../common/gdbinit.in" ;;
"$ac_config_links_1" ) CONFIG_LINKS="$CONFIG_LINKS $ac_config_links_1" ;;
- "default" ) CONFIG_COMMANDS="$CONFIG_COMMANDS default" ;;
+ "Makefile" ) CONFIG_COMMANDS="$CONFIG_COMMANDS Makefile" ;;
+ "stamp-h" ) CONFIG_COMMANDS="$CONFIG_COMMANDS stamp-h" ;;
"config.h" ) CONFIG_HEADERS="$CONFIG_HEADERS config.h:config.in" ;;
*) { { echo "$as_me:$LINENO: error: invalid argument: $ac_config_target" >&5
echo "$as_me: error: invalid argument: $ac_config_target" >&2;}
{ echo "$as_me:$LINENO: executing $ac_dest commands" >&5
echo "$as_me: executing $ac_dest commands" >&6;}
case $ac_dest in
- default ) case "x$CONFIG_FILES" in
- xMakefile*)
- echo "Merging Makefile.sim+Make-common.sim into Makefile ..."
- rm -f Makesim1.tmp Makesim2.tmp Makefile
- sed -n -e '/^## COMMON_PRE_/,/^## End COMMON_PRE_/ p' <Make-common.sim >Makesim1.tmp
- sed -n -e '/^## COMMON_POST_/,/^## End COMMON_POST_/ p' <Make-common.sim >Makesim2.tmp
- sed -e '/^## COMMON_PRE_/ r Makesim1.tmp' \
+ Makefile ) echo "Merging Makefile.sim+Make-common.sim into Makefile ..."
+ rm -f Makesim1.tmp Makesim2.tmp Makefile
+ sed -n -e '/^## COMMON_PRE_/,/^## End COMMON_PRE_/ p' <Make-common.sim >Makesim1.tmp
+ sed -n -e '/^## COMMON_POST_/,/^## End COMMON_POST_/ p' <Make-common.sim >Makesim2.tmp
+ sed -e '/^## COMMON_PRE_/ r Makesim1.tmp' \
-e '/^## COMMON_POST_/ r Makesim2.tmp' \
<Makefile.sim >Makefile
- rm -f Makefile.sim Make-common.sim Makesim1.tmp Makesim2.tmp
- ;;
- esac
- case "x$CONFIG_HEADERS" in xconfig.h:config.in) echo > stamp-h ;; esac
+ rm -f Makefile.sim Make-common.sim Makesim1.tmp Makesim2.tmp
;;
+ stamp-h ) echo > stamp-h ;;
esac
done
_ACEOF
+2005-01-11 Andrew Cagney <cagney@localhost.localdomain>
+
+ * configure: Regenerated to track ../common/aclocal.m4 changes.
+
2005-01-07 Andrew Cagney <cagney@gnu.org>
* configure.ac: Rename configure.in, require autoconf 2.59.
+ac_aux_dir=
+for ac_dir in $srcdir $srcdir/.. $srcdir/../..; do
+ if test -f $ac_dir/install-sh; then
+ ac_aux_dir=$ac_dir
+ ac_install_sh="$ac_aux_dir/install-sh -c"
+ break
+ elif test -f $ac_dir/install.sh; then
+ ac_aux_dir=$ac_dir
+ ac_install_sh="$ac_aux_dir/install.sh -c"
+ break
+ elif test -f $ac_dir/shtool; then
+ ac_aux_dir=$ac_dir
+ ac_install_sh="$ac_aux_dir/shtool install -c"
+ break
+ fi
+done
+if test -z "$ac_aux_dir"; then
+ { { echo "$as_me:$LINENO: error: cannot find install-sh or install.sh in $srcdir $srcdir/.. $srcdir/../.." >&5
+echo "$as_me: error: cannot find install-sh or install.sh in $srcdir $srcdir/.. $srcdir/../.." >&2;}
+ { (exit 1); exit 1; }; }
+fi
+ac_config_guess="$SHELL $ac_aux_dir/config.guess"
+ac_config_sub="$SHELL $ac_aux_dir/config.sub"
+ac_configure="$SHELL $ac_aux_dir/configure" # This should be Cygnus configure.
+
# Make sure we can run config.sub.
$ac_config_sub sun4 >/dev/null 2>&1 ||
{ { echo "$as_me:$LINENO: error: cannot run $ac_config_sub" >&5
# autoconf.info says this should be called right after AC_INIT.
ac_config_headers="$ac_config_headers config.h:config.in"
-
-ac_aux_dir=
-for ac_dir in `cd $srcdir;pwd`/../.. $srcdir/`cd $srcdir;pwd`/../..; do
- if test -f $ac_dir/install-sh; then
- ac_aux_dir=$ac_dir
- ac_install_sh="$ac_aux_dir/install-sh -c"
- break
- elif test -f $ac_dir/install.sh; then
- ac_aux_dir=$ac_dir
- ac_install_sh="$ac_aux_dir/install.sh -c"
- break
- elif test -f $ac_dir/shtool; then
- ac_aux_dir=$ac_dir
- ac_install_sh="$ac_aux_dir/shtool install -c"
- break
- fi
-done
-if test -z "$ac_aux_dir"; then
- { { echo "$as_me:$LINENO: error: cannot find install-sh or install.sh in \`cd $srcdir;pwd\`/../.. $srcdir/\`cd $srcdir;pwd\`/../.." >&5
-echo "$as_me: error: cannot find install-sh or install.sh in \`cd $srcdir;pwd\`/../.. $srcdir/\`cd $srcdir;pwd\`/../.." >&2;}
- { (exit 1); exit 1; }; }
-fi
-ac_config_guess="$SHELL $ac_aux_dir/config.guess"
-ac_config_sub="$SHELL $ac_aux_dir/config.sub"
-ac_configure="$SHELL $ac_aux_dir/configure" # This should be Cygnus configure.
-
echo "$as_me:$LINENO: checking target system type" >&5
echo $ECHO_N "checking target system type... $ECHO_C" >&6
if test "${ac_cv_target+set}" = set; then
+
sim_link_files=
sim_link_links=
cgen_breaks="break cgen_rtx_error";
fi
- ac_config_files="$ac_config_files Makefile.sim:Makefile.in Make-common.sim:../common/Make-common.in .gdbinit:../common/gdbinit.in"
- ac_config_commands="$ac_config_commands default"
+ ac_config_files="$ac_config_files Makefile.sim:Makefile.in"
+
+ ac_config_files="$ac_config_files Make-common.sim:../common/Make-common.in"
+
+ ac_config_files="$ac_config_files .gdbinit:../common/gdbinit.in"
+
+ ac_config_commands="$ac_config_commands Makefile"
+
+ ac_config_commands="$ac_config_commands stamp-h"
+
cat >confcache <<\_ACEOF
# This file is a shell script that caches the results of configure
# tests run on this system so they can be shared between configure
"Make-common.sim" ) CONFIG_FILES="$CONFIG_FILES Make-common.sim:../common/Make-common.in" ;;
".gdbinit" ) CONFIG_FILES="$CONFIG_FILES .gdbinit:../common/gdbinit.in" ;;
"$ac_config_links_1" ) CONFIG_LINKS="$CONFIG_LINKS $ac_config_links_1" ;;
- "default" ) CONFIG_COMMANDS="$CONFIG_COMMANDS default" ;;
+ "Makefile" ) CONFIG_COMMANDS="$CONFIG_COMMANDS Makefile" ;;
+ "stamp-h" ) CONFIG_COMMANDS="$CONFIG_COMMANDS stamp-h" ;;
"config.h" ) CONFIG_HEADERS="$CONFIG_HEADERS config.h:config.in" ;;
*) { { echo "$as_me:$LINENO: error: invalid argument: $ac_config_target" >&5
echo "$as_me: error: invalid argument: $ac_config_target" >&2;}
{ echo "$as_me:$LINENO: executing $ac_dest commands" >&5
echo "$as_me: executing $ac_dest commands" >&6;}
case $ac_dest in
- default ) case "x$CONFIG_FILES" in
- xMakefile*)
- echo "Merging Makefile.sim+Make-common.sim into Makefile ..."
- rm -f Makesim1.tmp Makesim2.tmp Makefile
- sed -n -e '/^## COMMON_PRE_/,/^## End COMMON_PRE_/ p' <Make-common.sim >Makesim1.tmp
- sed -n -e '/^## COMMON_POST_/,/^## End COMMON_POST_/ p' <Make-common.sim >Makesim2.tmp
- sed -e '/^## COMMON_PRE_/ r Makesim1.tmp' \
+ Makefile ) echo "Merging Makefile.sim+Make-common.sim into Makefile ..."
+ rm -f Makesim1.tmp Makesim2.tmp Makefile
+ sed -n -e '/^## COMMON_PRE_/,/^## End COMMON_PRE_/ p' <Make-common.sim >Makesim1.tmp
+ sed -n -e '/^## COMMON_POST_/,/^## End COMMON_POST_/ p' <Make-common.sim >Makesim2.tmp
+ sed -e '/^## COMMON_PRE_/ r Makesim1.tmp' \
-e '/^## COMMON_POST_/ r Makesim2.tmp' \
<Makefile.sim >Makefile
- rm -f Makefile.sim Make-common.sim Makesim1.tmp Makesim2.tmp
- ;;
- esac
- case "x$CONFIG_HEADERS" in xconfig.h:config.in) echo > stamp-h ;; esac
+ rm -f Makefile.sim Make-common.sim Makesim1.tmp Makesim2.tmp
;;
+ stamp-h ) echo > stamp-h ;;
esac
done
_ACEOF
+2005-01-11 Andrew Cagney <cagney@localhost.localdomain>
+
+ * configure: Regenerated to track ../common/aclocal.m4 changes.
+
2005-01-07 Andrew Cagney <cagney@gnu.org>
* configure.ac: Rename configure.in, require autoconf 2.59.
+ac_aux_dir=
+for ac_dir in $srcdir $srcdir/.. $srcdir/../..; do
+ if test -f $ac_dir/install-sh; then
+ ac_aux_dir=$ac_dir
+ ac_install_sh="$ac_aux_dir/install-sh -c"
+ break
+ elif test -f $ac_dir/install.sh; then
+ ac_aux_dir=$ac_dir
+ ac_install_sh="$ac_aux_dir/install.sh -c"
+ break
+ elif test -f $ac_dir/shtool; then
+ ac_aux_dir=$ac_dir
+ ac_install_sh="$ac_aux_dir/shtool install -c"
+ break
+ fi
+done
+if test -z "$ac_aux_dir"; then
+ { { echo "$as_me:$LINENO: error: cannot find install-sh or install.sh in $srcdir $srcdir/.. $srcdir/../.." >&5
+echo "$as_me: error: cannot find install-sh or install.sh in $srcdir $srcdir/.. $srcdir/../.." >&2;}
+ { (exit 1); exit 1; }; }
+fi
+ac_config_guess="$SHELL $ac_aux_dir/config.guess"
+ac_config_sub="$SHELL $ac_aux_dir/config.sub"
+ac_configure="$SHELL $ac_aux_dir/configure" # This should be Cygnus configure.
+
# Make sure we can run config.sub.
$ac_config_sub sun4 >/dev/null 2>&1 ||
{ { echo "$as_me:$LINENO: error: cannot run $ac_config_sub" >&5
# autoconf.info says this should be called right after AC_INIT.
ac_config_headers="$ac_config_headers config.h:config.in"
-
-ac_aux_dir=
-for ac_dir in `cd $srcdir;pwd`/../.. $srcdir/`cd $srcdir;pwd`/../..; do
- if test -f $ac_dir/install-sh; then
- ac_aux_dir=$ac_dir
- ac_install_sh="$ac_aux_dir/install-sh -c"
- break
- elif test -f $ac_dir/install.sh; then
- ac_aux_dir=$ac_dir
- ac_install_sh="$ac_aux_dir/install.sh -c"
- break
- elif test -f $ac_dir/shtool; then
- ac_aux_dir=$ac_dir
- ac_install_sh="$ac_aux_dir/shtool install -c"
- break
- fi
-done
-if test -z "$ac_aux_dir"; then
- { { echo "$as_me:$LINENO: error: cannot find install-sh or install.sh in \`cd $srcdir;pwd\`/../.. $srcdir/\`cd $srcdir;pwd\`/../.." >&5
-echo "$as_me: error: cannot find install-sh or install.sh in \`cd $srcdir;pwd\`/../.. $srcdir/\`cd $srcdir;pwd\`/../.." >&2;}
- { (exit 1); exit 1; }; }
-fi
-ac_config_guess="$SHELL $ac_aux_dir/config.guess"
-ac_config_sub="$SHELL $ac_aux_dir/config.sub"
-ac_configure="$SHELL $ac_aux_dir/configure" # This should be Cygnus configure.
-
echo "$as_me:$LINENO: checking target system type" >&5
echo $ECHO_N "checking target system type... $ECHO_C" >&6
if test "${ac_cv_target+set}" = set; then
cgen_breaks="break cgen_rtx_error";
fi
- ac_config_files="$ac_config_files Makefile.sim:Makefile.in Make-common.sim:../common/Make-common.in .gdbinit:../common/gdbinit.in"
- ac_config_commands="$ac_config_commands default"
+ ac_config_files="$ac_config_files Makefile.sim:Makefile.in"
+
+ ac_config_files="$ac_config_files Make-common.sim:../common/Make-common.in"
+
+ ac_config_files="$ac_config_files .gdbinit:../common/gdbinit.in"
+
+ ac_config_commands="$ac_config_commands Makefile"
+
+ ac_config_commands="$ac_config_commands stamp-h"
+
cat >confcache <<\_ACEOF
# This file is a shell script that caches the results of configure
# tests run on this system so they can be shared between configure
"Make-common.sim" ) CONFIG_FILES="$CONFIG_FILES Make-common.sim:../common/Make-common.in" ;;
".gdbinit" ) CONFIG_FILES="$CONFIG_FILES .gdbinit:../common/gdbinit.in" ;;
"$ac_config_links_1" ) CONFIG_LINKS="$CONFIG_LINKS $ac_config_links_1" ;;
- "default" ) CONFIG_COMMANDS="$CONFIG_COMMANDS default" ;;
+ "Makefile" ) CONFIG_COMMANDS="$CONFIG_COMMANDS Makefile" ;;
+ "stamp-h" ) CONFIG_COMMANDS="$CONFIG_COMMANDS stamp-h" ;;
"config.h" ) CONFIG_HEADERS="$CONFIG_HEADERS config.h:config.in" ;;
*) { { echo "$as_me:$LINENO: error: invalid argument: $ac_config_target" >&5
echo "$as_me: error: invalid argument: $ac_config_target" >&2;}
{ echo "$as_me:$LINENO: executing $ac_dest commands" >&5
echo "$as_me: executing $ac_dest commands" >&6;}
case $ac_dest in
- default ) case "x$CONFIG_FILES" in
- xMakefile*)
- echo "Merging Makefile.sim+Make-common.sim into Makefile ..."
- rm -f Makesim1.tmp Makesim2.tmp Makefile
- sed -n -e '/^## COMMON_PRE_/,/^## End COMMON_PRE_/ p' <Make-common.sim >Makesim1.tmp
- sed -n -e '/^## COMMON_POST_/,/^## End COMMON_POST_/ p' <Make-common.sim >Makesim2.tmp
- sed -e '/^## COMMON_PRE_/ r Makesim1.tmp' \
+ Makefile ) echo "Merging Makefile.sim+Make-common.sim into Makefile ..."
+ rm -f Makesim1.tmp Makesim2.tmp Makefile
+ sed -n -e '/^## COMMON_PRE_/,/^## End COMMON_PRE_/ p' <Make-common.sim >Makesim1.tmp
+ sed -n -e '/^## COMMON_POST_/,/^## End COMMON_POST_/ p' <Make-common.sim >Makesim2.tmp
+ sed -e '/^## COMMON_PRE_/ r Makesim1.tmp' \
-e '/^## COMMON_POST_/ r Makesim2.tmp' \
<Makefile.sim >Makefile
- rm -f Makefile.sim Make-common.sim Makesim1.tmp Makesim2.tmp
- ;;
- esac
- case "x$CONFIG_HEADERS" in xconfig.h:config.in) echo > stamp-h ;; esac
+ rm -f Makefile.sim Make-common.sim Makesim1.tmp Makesim2.tmp
;;
+ stamp-h ) echo > stamp-h ;;
esac
done
_ACEOF
+2005-01-11 Andrew Cagney <cagney@localhost.localdomain>
+
+ * configure.ac: Delete AC_CONFIG_AUX_DIR.
+ * configure: Re-generate.
+
2005-01-07 Andrew Cagney <cagney@gnu.org>
* configure.ac: Rename configure.in, require autoconf 2.59.
fi
-ac_aux_dir=
-for ac_dir in `cd $srcdir;pwd`/../.. $srcdir/`cd $srcdir;pwd`/../..; do
- if test -f $ac_dir/install-sh; then
- ac_aux_dir=$ac_dir
- ac_install_sh="$ac_aux_dir/install-sh -c"
- break
- elif test -f $ac_dir/install.sh; then
- ac_aux_dir=$ac_dir
- ac_install_sh="$ac_aux_dir/install.sh -c"
- break
- elif test -f $ac_dir/shtool; then
- ac_aux_dir=$ac_dir
- ac_install_sh="$ac_aux_dir/shtool install -c"
- break
- fi
-done
-if test -z "$ac_aux_dir"; then
- { { echo "$as_me:$LINENO: error: cannot find install-sh or install.sh in \`cd $srcdir;pwd\`/../.. $srcdir/\`cd $srcdir;pwd\`/../.." >&5
-echo "$as_me: error: cannot find install-sh or install.sh in \`cd $srcdir;pwd\`/../.. $srcdir/\`cd $srcdir;pwd\`/../.." >&2;}
- { (exit 1); exit 1; }; }
-fi
-ac_config_guess="$SHELL $ac_aux_dir/config.guess"
-ac_config_sub="$SHELL $ac_aux_dir/config.sub"
-ac_configure="$SHELL $ac_aux_dir/configure" # This should be Cygnus configure.
-
# Make sure we can run config.sub.
$ac_config_sub sun4 >/dev/null 2>&1 ||
{ { echo "$as_me:$LINENO: error: cannot run $ac_config_sub" >&5
fi
-AC_CONFIG_AUX_DIR(`cd $srcdir;pwd`/../..)
AC_CANONICAL_SYSTEM
AC_ARG_PROGRAM
+2005-01-11 Andrew Cagney <cagney@localhost.localdomain>
+
+ * configure: Regenerated to track ../common/aclocal.m4 changes.
+
2005-01-07 Andrew Cagney <cagney@gnu.org>
* configure.ac: Rename configure.in, require autoconf 2.59.
+ac_aux_dir=
+for ac_dir in $srcdir $srcdir/.. $srcdir/../..; do
+ if test -f $ac_dir/install-sh; then
+ ac_aux_dir=$ac_dir
+ ac_install_sh="$ac_aux_dir/install-sh -c"
+ break
+ elif test -f $ac_dir/install.sh; then
+ ac_aux_dir=$ac_dir
+ ac_install_sh="$ac_aux_dir/install.sh -c"
+ break
+ elif test -f $ac_dir/shtool; then
+ ac_aux_dir=$ac_dir
+ ac_install_sh="$ac_aux_dir/shtool install -c"
+ break
+ fi
+done
+if test -z "$ac_aux_dir"; then
+ { { echo "$as_me:$LINENO: error: cannot find install-sh or install.sh in $srcdir $srcdir/.. $srcdir/../.." >&5
+echo "$as_me: error: cannot find install-sh or install.sh in $srcdir $srcdir/.. $srcdir/../.." >&2;}
+ { (exit 1); exit 1; }; }
+fi
+ac_config_guess="$SHELL $ac_aux_dir/config.guess"
+ac_config_sub="$SHELL $ac_aux_dir/config.sub"
+ac_configure="$SHELL $ac_aux_dir/configure" # This should be Cygnus configure.
+
# Make sure we can run config.sub.
$ac_config_sub sun4 >/dev/null 2>&1 ||
{ { echo "$as_me:$LINENO: error: cannot run $ac_config_sub" >&5
# autoconf.info says this should be called right after AC_INIT.
ac_config_headers="$ac_config_headers config.h:config.in"
-
-ac_aux_dir=
-for ac_dir in `cd $srcdir;pwd`/../.. $srcdir/`cd $srcdir;pwd`/../..; do
- if test -f $ac_dir/install-sh; then
- ac_aux_dir=$ac_dir
- ac_install_sh="$ac_aux_dir/install-sh -c"
- break
- elif test -f $ac_dir/install.sh; then
- ac_aux_dir=$ac_dir
- ac_install_sh="$ac_aux_dir/install.sh -c"
- break
- elif test -f $ac_dir/shtool; then
- ac_aux_dir=$ac_dir
- ac_install_sh="$ac_aux_dir/shtool install -c"
- break
- fi
-done
-if test -z "$ac_aux_dir"; then
- { { echo "$as_me:$LINENO: error: cannot find install-sh or install.sh in \`cd $srcdir;pwd\`/../.. $srcdir/\`cd $srcdir;pwd\`/../.." >&5
-echo "$as_me: error: cannot find install-sh or install.sh in \`cd $srcdir;pwd\`/../.. $srcdir/\`cd $srcdir;pwd\`/../.." >&2;}
- { (exit 1); exit 1; }; }
-fi
-ac_config_guess="$SHELL $ac_aux_dir/config.guess"
-ac_config_sub="$SHELL $ac_aux_dir/config.sub"
-ac_configure="$SHELL $ac_aux_dir/configure" # This should be Cygnus configure.
-
echo "$as_me:$LINENO: checking target system type" >&5
echo $ECHO_N "checking target system type... $ECHO_C" >&6
if test "${ac_cv_target+set}" = set; then
cgen_breaks="break cgen_rtx_error";
fi
- ac_config_files="$ac_config_files Makefile.sim:Makefile.in Make-common.sim:../common/Make-common.in .gdbinit:../common/gdbinit.in"
- ac_config_commands="$ac_config_commands default"
+ ac_config_files="$ac_config_files Makefile.sim:Makefile.in"
+
+ ac_config_files="$ac_config_files Make-common.sim:../common/Make-common.in"
+
+ ac_config_files="$ac_config_files .gdbinit:../common/gdbinit.in"
+
+ ac_config_commands="$ac_config_commands Makefile"
+
+ ac_config_commands="$ac_config_commands stamp-h"
+
cat >confcache <<\_ACEOF
# This file is a shell script that caches the results of configure
# tests run on this system so they can be shared between configure
"Make-common.sim" ) CONFIG_FILES="$CONFIG_FILES Make-common.sim:../common/Make-common.in" ;;
".gdbinit" ) CONFIG_FILES="$CONFIG_FILES .gdbinit:../common/gdbinit.in" ;;
"$ac_config_links_1" ) CONFIG_LINKS="$CONFIG_LINKS $ac_config_links_1" ;;
- "default" ) CONFIG_COMMANDS="$CONFIG_COMMANDS default" ;;
+ "Makefile" ) CONFIG_COMMANDS="$CONFIG_COMMANDS Makefile" ;;
+ "stamp-h" ) CONFIG_COMMANDS="$CONFIG_COMMANDS stamp-h" ;;
"config.h" ) CONFIG_HEADERS="$CONFIG_HEADERS config.h:config.in" ;;
*) { { echo "$as_me:$LINENO: error: invalid argument: $ac_config_target" >&5
echo "$as_me: error: invalid argument: $ac_config_target" >&2;}
{ echo "$as_me:$LINENO: executing $ac_dest commands" >&5
echo "$as_me: executing $ac_dest commands" >&6;}
case $ac_dest in
- default ) case "x$CONFIG_FILES" in
- xMakefile*)
- echo "Merging Makefile.sim+Make-common.sim into Makefile ..."
- rm -f Makesim1.tmp Makesim2.tmp Makefile
- sed -n -e '/^## COMMON_PRE_/,/^## End COMMON_PRE_/ p' <Make-common.sim >Makesim1.tmp
- sed -n -e '/^## COMMON_POST_/,/^## End COMMON_POST_/ p' <Make-common.sim >Makesim2.tmp
- sed -e '/^## COMMON_PRE_/ r Makesim1.tmp' \
+ Makefile ) echo "Merging Makefile.sim+Make-common.sim into Makefile ..."
+ rm -f Makesim1.tmp Makesim2.tmp Makefile
+ sed -n -e '/^## COMMON_PRE_/,/^## End COMMON_PRE_/ p' <Make-common.sim >Makesim1.tmp
+ sed -n -e '/^## COMMON_POST_/,/^## End COMMON_POST_/ p' <Make-common.sim >Makesim2.tmp
+ sed -e '/^## COMMON_PRE_/ r Makesim1.tmp' \
-e '/^## COMMON_POST_/ r Makesim2.tmp' \
<Makefile.sim >Makefile
- rm -f Makefile.sim Make-common.sim Makesim1.tmp Makesim2.tmp
- ;;
- esac
- case "x$CONFIG_HEADERS" in xconfig.h:config.in) echo > stamp-h ;; esac
+ rm -f Makefile.sim Make-common.sim Makesim1.tmp Makesim2.tmp
;;
+ stamp-h ) echo > stamp-h ;;
esac
done
_ACEOF
+2005-01-11 Andrew Cagney <cagney@localhost.localdomain>
+
+ * configure: Regenerated to track ../common/aclocal.m4 changes.
+
2005-01-07 Andrew Cagney <cagney@gnu.org>
* configure.ac: Rename configure.in, require autoconf 2.59.
+ac_aux_dir=
+for ac_dir in $srcdir $srcdir/.. $srcdir/../..; do
+ if test -f $ac_dir/install-sh; then
+ ac_aux_dir=$ac_dir
+ ac_install_sh="$ac_aux_dir/install-sh -c"
+ break
+ elif test -f $ac_dir/install.sh; then
+ ac_aux_dir=$ac_dir
+ ac_install_sh="$ac_aux_dir/install.sh -c"
+ break
+ elif test -f $ac_dir/shtool; then
+ ac_aux_dir=$ac_dir
+ ac_install_sh="$ac_aux_dir/shtool install -c"
+ break
+ fi
+done
+if test -z "$ac_aux_dir"; then
+ { { echo "$as_me:$LINENO: error: cannot find install-sh or install.sh in $srcdir $srcdir/.. $srcdir/../.." >&5
+echo "$as_me: error: cannot find install-sh or install.sh in $srcdir $srcdir/.. $srcdir/../.." >&2;}
+ { (exit 1); exit 1; }; }
+fi
+ac_config_guess="$SHELL $ac_aux_dir/config.guess"
+ac_config_sub="$SHELL $ac_aux_dir/config.sub"
+ac_configure="$SHELL $ac_aux_dir/configure" # This should be Cygnus configure.
+
# Make sure we can run config.sub.
$ac_config_sub sun4 >/dev/null 2>&1 ||
{ { echo "$as_me:$LINENO: error: cannot run $ac_config_sub" >&5
# autoconf.info says this should be called right after AC_INIT.
ac_config_headers="$ac_config_headers config.h:config.in"
-
-ac_aux_dir=
-for ac_dir in `cd $srcdir;pwd`/../.. $srcdir/`cd $srcdir;pwd`/../..; do
- if test -f $ac_dir/install-sh; then
- ac_aux_dir=$ac_dir
- ac_install_sh="$ac_aux_dir/install-sh -c"
- break
- elif test -f $ac_dir/install.sh; then
- ac_aux_dir=$ac_dir
- ac_install_sh="$ac_aux_dir/install.sh -c"
- break
- elif test -f $ac_dir/shtool; then
- ac_aux_dir=$ac_dir
- ac_install_sh="$ac_aux_dir/shtool install -c"
- break
- fi
-done
-if test -z "$ac_aux_dir"; then
- { { echo "$as_me:$LINENO: error: cannot find install-sh or install.sh in \`cd $srcdir;pwd\`/../.. $srcdir/\`cd $srcdir;pwd\`/../.." >&5
-echo "$as_me: error: cannot find install-sh or install.sh in \`cd $srcdir;pwd\`/../.. $srcdir/\`cd $srcdir;pwd\`/../.." >&2;}
- { (exit 1); exit 1; }; }
-fi
-ac_config_guess="$SHELL $ac_aux_dir/config.guess"
-ac_config_sub="$SHELL $ac_aux_dir/config.sub"
-ac_configure="$SHELL $ac_aux_dir/configure" # This should be Cygnus configure.
-
echo "$as_me:$LINENO: checking target system type" >&5
echo $ECHO_N "checking target system type... $ECHO_C" >&6
if test "${ac_cv_target+set}" = set; then
cgen_breaks="break cgen_rtx_error";
fi
- ac_config_files="$ac_config_files Makefile.sim:Makefile.in Make-common.sim:../common/Make-common.in .gdbinit:../common/gdbinit.in"
- ac_config_commands="$ac_config_commands default"
+ ac_config_files="$ac_config_files Makefile.sim:Makefile.in"
+
+ ac_config_files="$ac_config_files Make-common.sim:../common/Make-common.in"
+
+ ac_config_files="$ac_config_files .gdbinit:../common/gdbinit.in"
+
+ ac_config_commands="$ac_config_commands Makefile"
+
+ ac_config_commands="$ac_config_commands stamp-h"
+
cat >confcache <<\_ACEOF
# This file is a shell script that caches the results of configure
# tests run on this system so they can be shared between configure
"Make-common.sim" ) CONFIG_FILES="$CONFIG_FILES Make-common.sim:../common/Make-common.in" ;;
".gdbinit" ) CONFIG_FILES="$CONFIG_FILES .gdbinit:../common/gdbinit.in" ;;
"$ac_config_links_1" ) CONFIG_LINKS="$CONFIG_LINKS $ac_config_links_1" ;;
- "default" ) CONFIG_COMMANDS="$CONFIG_COMMANDS default" ;;
+ "Makefile" ) CONFIG_COMMANDS="$CONFIG_COMMANDS Makefile" ;;
+ "stamp-h" ) CONFIG_COMMANDS="$CONFIG_COMMANDS stamp-h" ;;
"config.h" ) CONFIG_HEADERS="$CONFIG_HEADERS config.h:config.in" ;;
*) { { echo "$as_me:$LINENO: error: invalid argument: $ac_config_target" >&5
echo "$as_me: error: invalid argument: $ac_config_target" >&2;}
{ echo "$as_me:$LINENO: executing $ac_dest commands" >&5
echo "$as_me: executing $ac_dest commands" >&6;}
case $ac_dest in
- default ) case "x$CONFIG_FILES" in
- xMakefile*)
- echo "Merging Makefile.sim+Make-common.sim into Makefile ..."
- rm -f Makesim1.tmp Makesim2.tmp Makefile
- sed -n -e '/^## COMMON_PRE_/,/^## End COMMON_PRE_/ p' <Make-common.sim >Makesim1.tmp
- sed -n -e '/^## COMMON_POST_/,/^## End COMMON_POST_/ p' <Make-common.sim >Makesim2.tmp
- sed -e '/^## COMMON_PRE_/ r Makesim1.tmp' \
+ Makefile ) echo "Merging Makefile.sim+Make-common.sim into Makefile ..."
+ rm -f Makesim1.tmp Makesim2.tmp Makefile
+ sed -n -e '/^## COMMON_PRE_/,/^## End COMMON_PRE_/ p' <Make-common.sim >Makesim1.tmp
+ sed -n -e '/^## COMMON_POST_/,/^## End COMMON_POST_/ p' <Make-common.sim >Makesim2.tmp
+ sed -e '/^## COMMON_PRE_/ r Makesim1.tmp' \
-e '/^## COMMON_POST_/ r Makesim2.tmp' \
<Makefile.sim >Makefile
- rm -f Makefile.sim Make-common.sim Makesim1.tmp Makesim2.tmp
- ;;
- esac
- case "x$CONFIG_HEADERS" in xconfig.h:config.in) echo > stamp-h ;; esac
+ rm -f Makefile.sim Make-common.sim Makesim1.tmp Makesim2.tmp
;;
+ stamp-h ) echo > stamp-h ;;
esac
done
_ACEOF
+2005-01-11 Andrew Cagney <cagney@localhost.localdomain>
+
+ * configure: Regenerated to track ../common/aclocal.m4 changes.
+
2005-01-07 Andrew Cagney <cagney@gnu.org>
* configure.ac: Rename configure.in, require autoconf 2.59.
+ac_aux_dir=
+for ac_dir in $srcdir $srcdir/.. $srcdir/../..; do
+ if test -f $ac_dir/install-sh; then
+ ac_aux_dir=$ac_dir
+ ac_install_sh="$ac_aux_dir/install-sh -c"
+ break
+ elif test -f $ac_dir/install.sh; then
+ ac_aux_dir=$ac_dir
+ ac_install_sh="$ac_aux_dir/install.sh -c"
+ break
+ elif test -f $ac_dir/shtool; then
+ ac_aux_dir=$ac_dir
+ ac_install_sh="$ac_aux_dir/shtool install -c"
+ break
+ fi
+done
+if test -z "$ac_aux_dir"; then
+ { { echo "$as_me:$LINENO: error: cannot find install-sh or install.sh in $srcdir $srcdir/.. $srcdir/../.." >&5
+echo "$as_me: error: cannot find install-sh or install.sh in $srcdir $srcdir/.. $srcdir/../.." >&2;}
+ { (exit 1); exit 1; }; }
+fi
+ac_config_guess="$SHELL $ac_aux_dir/config.guess"
+ac_config_sub="$SHELL $ac_aux_dir/config.sub"
+ac_configure="$SHELL $ac_aux_dir/configure" # This should be Cygnus configure.
+
# Make sure we can run config.sub.
$ac_config_sub sun4 >/dev/null 2>&1 ||
{ { echo "$as_me:$LINENO: error: cannot run $ac_config_sub" >&5
# autoconf.info says this should be called right after AC_INIT.
ac_config_headers="$ac_config_headers config.h:config.in"
-
-ac_aux_dir=
-for ac_dir in `cd $srcdir;pwd`/../.. $srcdir/`cd $srcdir;pwd`/../..; do
- if test -f $ac_dir/install-sh; then
- ac_aux_dir=$ac_dir
- ac_install_sh="$ac_aux_dir/install-sh -c"
- break
- elif test -f $ac_dir/install.sh; then
- ac_aux_dir=$ac_dir
- ac_install_sh="$ac_aux_dir/install.sh -c"
- break
- elif test -f $ac_dir/shtool; then
- ac_aux_dir=$ac_dir
- ac_install_sh="$ac_aux_dir/shtool install -c"
- break
- fi
-done
-if test -z "$ac_aux_dir"; then
- { { echo "$as_me:$LINENO: error: cannot find install-sh or install.sh in \`cd $srcdir;pwd\`/../.. $srcdir/\`cd $srcdir;pwd\`/../.." >&5
-echo "$as_me: error: cannot find install-sh or install.sh in \`cd $srcdir;pwd\`/../.. $srcdir/\`cd $srcdir;pwd\`/../.." >&2;}
- { (exit 1); exit 1; }; }
-fi
-ac_config_guess="$SHELL $ac_aux_dir/config.guess"
-ac_config_sub="$SHELL $ac_aux_dir/config.sub"
-ac_configure="$SHELL $ac_aux_dir/configure" # This should be Cygnus configure.
-
echo "$as_me:$LINENO: checking target system type" >&5
echo $ECHO_N "checking target system type... $ECHO_C" >&6
if test "${ac_cv_target+set}" = set; then
cgen_breaks="break cgen_rtx_error";
fi
- ac_config_files="$ac_config_files Makefile.sim:Makefile.in Make-common.sim:../common/Make-common.in .gdbinit:../common/gdbinit.in"
- ac_config_commands="$ac_config_commands default"
+ ac_config_files="$ac_config_files Makefile.sim:Makefile.in"
+
+ ac_config_files="$ac_config_files Make-common.sim:../common/Make-common.in"
+
+ ac_config_files="$ac_config_files .gdbinit:../common/gdbinit.in"
+
+ ac_config_commands="$ac_config_commands Makefile"
+
+ ac_config_commands="$ac_config_commands stamp-h"
+
cat >confcache <<\_ACEOF
# This file is a shell script that caches the results of configure
# tests run on this system so they can be shared between configure
"Make-common.sim" ) CONFIG_FILES="$CONFIG_FILES Make-common.sim:../common/Make-common.in" ;;
".gdbinit" ) CONFIG_FILES="$CONFIG_FILES .gdbinit:../common/gdbinit.in" ;;
"$ac_config_links_1" ) CONFIG_LINKS="$CONFIG_LINKS $ac_config_links_1" ;;
- "default" ) CONFIG_COMMANDS="$CONFIG_COMMANDS default" ;;
+ "Makefile" ) CONFIG_COMMANDS="$CONFIG_COMMANDS Makefile" ;;
+ "stamp-h" ) CONFIG_COMMANDS="$CONFIG_COMMANDS stamp-h" ;;
"config.h" ) CONFIG_HEADERS="$CONFIG_HEADERS config.h:config.in" ;;
*) { { echo "$as_me:$LINENO: error: invalid argument: $ac_config_target" >&5
echo "$as_me: error: invalid argument: $ac_config_target" >&2;}
{ echo "$as_me:$LINENO: executing $ac_dest commands" >&5
echo "$as_me: executing $ac_dest commands" >&6;}
case $ac_dest in
- default ) case "x$CONFIG_FILES" in
- xMakefile*)
- echo "Merging Makefile.sim+Make-common.sim into Makefile ..."
- rm -f Makesim1.tmp Makesim2.tmp Makefile
- sed -n -e '/^## COMMON_PRE_/,/^## End COMMON_PRE_/ p' <Make-common.sim >Makesim1.tmp
- sed -n -e '/^## COMMON_POST_/,/^## End COMMON_POST_/ p' <Make-common.sim >Makesim2.tmp
- sed -e '/^## COMMON_PRE_/ r Makesim1.tmp' \
+ Makefile ) echo "Merging Makefile.sim+Make-common.sim into Makefile ..."
+ rm -f Makesim1.tmp Makesim2.tmp Makefile
+ sed -n -e '/^## COMMON_PRE_/,/^## End COMMON_PRE_/ p' <Make-common.sim >Makesim1.tmp
+ sed -n -e '/^## COMMON_POST_/,/^## End COMMON_POST_/ p' <Make-common.sim >Makesim2.tmp
+ sed -e '/^## COMMON_PRE_/ r Makesim1.tmp' \
-e '/^## COMMON_POST_/ r Makesim2.tmp' \
<Makefile.sim >Makefile
- rm -f Makefile.sim Make-common.sim Makesim1.tmp Makesim2.tmp
- ;;
- esac
- case "x$CONFIG_HEADERS" in xconfig.h:config.in) echo > stamp-h ;; esac
+ rm -f Makefile.sim Make-common.sim Makesim1.tmp Makesim2.tmp
;;
+ stamp-h ) echo > stamp-h ;;
esac
done
_ACEOF
+2005-01-11 Andrew Cagney <cagney@localhost.localdomain>
+
+ * configure: Regenerated to track ../common/aclocal.m4 changes.
+
2005-01-07 Andrew Cagney <cagney@gnu.org>
* configure.ac: Rename configure.in, require autoconf 2.59.
+ac_aux_dir=
+for ac_dir in $srcdir $srcdir/.. $srcdir/../..; do
+ if test -f $ac_dir/install-sh; then
+ ac_aux_dir=$ac_dir
+ ac_install_sh="$ac_aux_dir/install-sh -c"
+ break
+ elif test -f $ac_dir/install.sh; then
+ ac_aux_dir=$ac_dir
+ ac_install_sh="$ac_aux_dir/install.sh -c"
+ break
+ elif test -f $ac_dir/shtool; then
+ ac_aux_dir=$ac_dir
+ ac_install_sh="$ac_aux_dir/shtool install -c"
+ break
+ fi
+done
+if test -z "$ac_aux_dir"; then
+ { { echo "$as_me:$LINENO: error: cannot find install-sh or install.sh in $srcdir $srcdir/.. $srcdir/../.." >&5
+echo "$as_me: error: cannot find install-sh or install.sh in $srcdir $srcdir/.. $srcdir/../.." >&2;}
+ { (exit 1); exit 1; }; }
+fi
+ac_config_guess="$SHELL $ac_aux_dir/config.guess"
+ac_config_sub="$SHELL $ac_aux_dir/config.sub"
+ac_configure="$SHELL $ac_aux_dir/configure" # This should be Cygnus configure.
+
# Make sure we can run config.sub.
$ac_config_sub sun4 >/dev/null 2>&1 ||
{ { echo "$as_me:$LINENO: error: cannot run $ac_config_sub" >&5
# autoconf.info says this should be called right after AC_INIT.
ac_config_headers="$ac_config_headers config.h:config.in"
-
-ac_aux_dir=
-for ac_dir in `cd $srcdir;pwd`/../.. $srcdir/`cd $srcdir;pwd`/../..; do
- if test -f $ac_dir/install-sh; then
- ac_aux_dir=$ac_dir
- ac_install_sh="$ac_aux_dir/install-sh -c"
- break
- elif test -f $ac_dir/install.sh; then
- ac_aux_dir=$ac_dir
- ac_install_sh="$ac_aux_dir/install.sh -c"
- break
- elif test -f $ac_dir/shtool; then
- ac_aux_dir=$ac_dir
- ac_install_sh="$ac_aux_dir/shtool install -c"
- break
- fi
-done
-if test -z "$ac_aux_dir"; then
- { { echo "$as_me:$LINENO: error: cannot find install-sh or install.sh in \`cd $srcdir;pwd\`/../.. $srcdir/\`cd $srcdir;pwd\`/../.." >&5
-echo "$as_me: error: cannot find install-sh or install.sh in \`cd $srcdir;pwd\`/../.. $srcdir/\`cd $srcdir;pwd\`/../.." >&2;}
- { (exit 1); exit 1; }; }
-fi
-ac_config_guess="$SHELL $ac_aux_dir/config.guess"
-ac_config_sub="$SHELL $ac_aux_dir/config.sub"
-ac_configure="$SHELL $ac_aux_dir/configure" # This should be Cygnus configure.
-
echo "$as_me:$LINENO: checking target system type" >&5
echo $ECHO_N "checking target system type... $ECHO_C" >&6
if test "${ac_cv_target+set}" = set; then
cgen_breaks="break cgen_rtx_error";
fi
- ac_config_files="$ac_config_files Makefile.sim:Makefile.in Make-common.sim:../common/Make-common.in .gdbinit:../common/gdbinit.in"
- ac_config_commands="$ac_config_commands default"
+ ac_config_files="$ac_config_files Makefile.sim:Makefile.in"
+
+ ac_config_files="$ac_config_files Make-common.sim:../common/Make-common.in"
+
+ ac_config_files="$ac_config_files .gdbinit:../common/gdbinit.in"
+
+ ac_config_commands="$ac_config_commands Makefile"
+
+ ac_config_commands="$ac_config_commands stamp-h"
+
cat >confcache <<\_ACEOF
# This file is a shell script that caches the results of configure
# tests run on this system so they can be shared between configure
"Make-common.sim" ) CONFIG_FILES="$CONFIG_FILES Make-common.sim:../common/Make-common.in" ;;
".gdbinit" ) CONFIG_FILES="$CONFIG_FILES .gdbinit:../common/gdbinit.in" ;;
"$ac_config_links_1" ) CONFIG_LINKS="$CONFIG_LINKS $ac_config_links_1" ;;
- "default" ) CONFIG_COMMANDS="$CONFIG_COMMANDS default" ;;
+ "Makefile" ) CONFIG_COMMANDS="$CONFIG_COMMANDS Makefile" ;;
+ "stamp-h" ) CONFIG_COMMANDS="$CONFIG_COMMANDS stamp-h" ;;
"config.h" ) CONFIG_HEADERS="$CONFIG_HEADERS config.h:config.in" ;;
*) { { echo "$as_me:$LINENO: error: invalid argument: $ac_config_target" >&5
echo "$as_me: error: invalid argument: $ac_config_target" >&2;}
{ echo "$as_me:$LINENO: executing $ac_dest commands" >&5
echo "$as_me: executing $ac_dest commands" >&6;}
case $ac_dest in
- default ) case "x$CONFIG_FILES" in
- xMakefile*)
- echo "Merging Makefile.sim+Make-common.sim into Makefile ..."
- rm -f Makesim1.tmp Makesim2.tmp Makefile
- sed -n -e '/^## COMMON_PRE_/,/^## End COMMON_PRE_/ p' <Make-common.sim >Makesim1.tmp
- sed -n -e '/^## COMMON_POST_/,/^## End COMMON_POST_/ p' <Make-common.sim >Makesim2.tmp
- sed -e '/^## COMMON_PRE_/ r Makesim1.tmp' \
+ Makefile ) echo "Merging Makefile.sim+Make-common.sim into Makefile ..."
+ rm -f Makesim1.tmp Makesim2.tmp Makefile
+ sed -n -e '/^## COMMON_PRE_/,/^## End COMMON_PRE_/ p' <Make-common.sim >Makesim1.tmp
+ sed -n -e '/^## COMMON_POST_/,/^## End COMMON_POST_/ p' <Make-common.sim >Makesim2.tmp
+ sed -e '/^## COMMON_PRE_/ r Makesim1.tmp' \
-e '/^## COMMON_POST_/ r Makesim2.tmp' \
<Makefile.sim >Makefile
- rm -f Makefile.sim Make-common.sim Makesim1.tmp Makesim2.tmp
- ;;
- esac
- case "x$CONFIG_HEADERS" in xconfig.h:config.in) echo > stamp-h ;; esac
+ rm -f Makefile.sim Make-common.sim Makesim1.tmp Makesim2.tmp
;;
+ stamp-h ) echo > stamp-h ;;
esac
done
_ACEOF
+2005-01-11 Andrew Cagney <cagney@localhost.localdomain>
+
+ * configure: Regenerated to track ../common/aclocal.m4 changes.
+
2005-01-07 Andrew Cagney <cagney@gnu.org>
* configure.ac: Rename configure.in, require autoconf 2.59.
+ac_aux_dir=
+for ac_dir in $srcdir $srcdir/.. $srcdir/../..; do
+ if test -f $ac_dir/install-sh; then
+ ac_aux_dir=$ac_dir
+ ac_install_sh="$ac_aux_dir/install-sh -c"
+ break
+ elif test -f $ac_dir/install.sh; then
+ ac_aux_dir=$ac_dir
+ ac_install_sh="$ac_aux_dir/install.sh -c"
+ break
+ elif test -f $ac_dir/shtool; then
+ ac_aux_dir=$ac_dir
+ ac_install_sh="$ac_aux_dir/shtool install -c"
+ break
+ fi
+done
+if test -z "$ac_aux_dir"; then
+ { { echo "$as_me:$LINENO: error: cannot find install-sh or install.sh in $srcdir $srcdir/.. $srcdir/../.." >&5
+echo "$as_me: error: cannot find install-sh or install.sh in $srcdir $srcdir/.. $srcdir/../.." >&2;}
+ { (exit 1); exit 1; }; }
+fi
+ac_config_guess="$SHELL $ac_aux_dir/config.guess"
+ac_config_sub="$SHELL $ac_aux_dir/config.sub"
+ac_configure="$SHELL $ac_aux_dir/configure" # This should be Cygnus configure.
+
# Make sure we can run config.sub.
$ac_config_sub sun4 >/dev/null 2>&1 ||
{ { echo "$as_me:$LINENO: error: cannot run $ac_config_sub" >&5
# autoconf.info says this should be called right after AC_INIT.
ac_config_headers="$ac_config_headers config.h:config.in"
-
-ac_aux_dir=
-for ac_dir in `cd $srcdir;pwd`/../.. $srcdir/`cd $srcdir;pwd`/../..; do
- if test -f $ac_dir/install-sh; then
- ac_aux_dir=$ac_dir
- ac_install_sh="$ac_aux_dir/install-sh -c"
- break
- elif test -f $ac_dir/install.sh; then
- ac_aux_dir=$ac_dir
- ac_install_sh="$ac_aux_dir/install.sh -c"
- break
- elif test -f $ac_dir/shtool; then
- ac_aux_dir=$ac_dir
- ac_install_sh="$ac_aux_dir/shtool install -c"
- break
- fi
-done
-if test -z "$ac_aux_dir"; then
- { { echo "$as_me:$LINENO: error: cannot find install-sh or install.sh in \`cd $srcdir;pwd\`/../.. $srcdir/\`cd $srcdir;pwd\`/../.." >&5
-echo "$as_me: error: cannot find install-sh or install.sh in \`cd $srcdir;pwd\`/../.. $srcdir/\`cd $srcdir;pwd\`/../.." >&2;}
- { (exit 1); exit 1; }; }
-fi
-ac_config_guess="$SHELL $ac_aux_dir/config.guess"
-ac_config_sub="$SHELL $ac_aux_dir/config.sub"
-ac_configure="$SHELL $ac_aux_dir/configure" # This should be Cygnus configure.
-
echo "$as_me:$LINENO: checking target system type" >&5
echo $ECHO_N "checking target system type... $ECHO_C" >&6
if test "${ac_cv_target+set}" = set; then
cgen_breaks="break cgen_rtx_error";
fi
- ac_config_files="$ac_config_files Makefile.sim:Makefile.in Make-common.sim:../common/Make-common.in .gdbinit:../common/gdbinit.in"
- ac_config_commands="$ac_config_commands default"
+ ac_config_files="$ac_config_files Makefile.sim:Makefile.in"
+
+ ac_config_files="$ac_config_files Make-common.sim:../common/Make-common.in"
+
+ ac_config_files="$ac_config_files .gdbinit:../common/gdbinit.in"
+
+ ac_config_commands="$ac_config_commands Makefile"
+
+ ac_config_commands="$ac_config_commands stamp-h"
+
cat >confcache <<\_ACEOF
# This file is a shell script that caches the results of configure
# tests run on this system so they can be shared between configure
"Make-common.sim" ) CONFIG_FILES="$CONFIG_FILES Make-common.sim:../common/Make-common.in" ;;
".gdbinit" ) CONFIG_FILES="$CONFIG_FILES .gdbinit:../common/gdbinit.in" ;;
"$ac_config_links_1" ) CONFIG_LINKS="$CONFIG_LINKS $ac_config_links_1" ;;
- "default" ) CONFIG_COMMANDS="$CONFIG_COMMANDS default" ;;
+ "Makefile" ) CONFIG_COMMANDS="$CONFIG_COMMANDS Makefile" ;;
+ "stamp-h" ) CONFIG_COMMANDS="$CONFIG_COMMANDS stamp-h" ;;
"config.h" ) CONFIG_HEADERS="$CONFIG_HEADERS config.h:config.in" ;;
*) { { echo "$as_me:$LINENO: error: invalid argument: $ac_config_target" >&5
echo "$as_me: error: invalid argument: $ac_config_target" >&2;}
{ echo "$as_me:$LINENO: executing $ac_dest commands" >&5
echo "$as_me: executing $ac_dest commands" >&6;}
case $ac_dest in
- default ) case "x$CONFIG_FILES" in
- xMakefile*)
- echo "Merging Makefile.sim+Make-common.sim into Makefile ..."
- rm -f Makesim1.tmp Makesim2.tmp Makefile
- sed -n -e '/^## COMMON_PRE_/,/^## End COMMON_PRE_/ p' <Make-common.sim >Makesim1.tmp
- sed -n -e '/^## COMMON_POST_/,/^## End COMMON_POST_/ p' <Make-common.sim >Makesim2.tmp
- sed -e '/^## COMMON_PRE_/ r Makesim1.tmp' \
+ Makefile ) echo "Merging Makefile.sim+Make-common.sim into Makefile ..."
+ rm -f Makesim1.tmp Makesim2.tmp Makefile
+ sed -n -e '/^## COMMON_PRE_/,/^## End COMMON_PRE_/ p' <Make-common.sim >Makesim1.tmp
+ sed -n -e '/^## COMMON_POST_/,/^## End COMMON_POST_/ p' <Make-common.sim >Makesim2.tmp
+ sed -e '/^## COMMON_PRE_/ r Makesim1.tmp' \
-e '/^## COMMON_POST_/ r Makesim2.tmp' \
<Makefile.sim >Makefile
- rm -f Makefile.sim Make-common.sim Makesim1.tmp Makesim2.tmp
- ;;
- esac
- case "x$CONFIG_HEADERS" in xconfig.h:config.in) echo > stamp-h ;; esac
+ rm -f Makefile.sim Make-common.sim Makesim1.tmp Makesim2.tmp
;;
+ stamp-h ) echo > stamp-h ;;
esac
done
_ACEOF
+2005-01-11 Andrew Cagney <cagney@localhost.localdomain>
+
+ * configure.ac: Delete AC_CONFIG_AUX_DIR.
+ * configure: Re-generate.
+
2005-01-07 Andrew Cagney <cagney@gnu.org>
* configure.ac: Rename configure.in, require autoconf 2.59.
sim_xor_endian=""
fi;
-ac_aux_dir=
-for ac_dir in `cd $srcdir;pwd`/../.. $srcdir/`cd $srcdir;pwd`/../..; do
- if test -f $ac_dir/install-sh; then
- ac_aux_dir=$ac_dir
- ac_install_sh="$ac_aux_dir/install-sh -c"
- break
- elif test -f $ac_dir/install.sh; then
- ac_aux_dir=$ac_dir
- ac_install_sh="$ac_aux_dir/install.sh -c"
- break
- elif test -f $ac_dir/shtool; then
- ac_aux_dir=$ac_dir
- ac_install_sh="$ac_aux_dir/shtool install -c"
- break
- fi
-done
-if test -z "$ac_aux_dir"; then
- { { echo "$as_me:$LINENO: error: cannot find install-sh or install.sh in \`cd $srcdir;pwd\`/../.. $srcdir/\`cd $srcdir;pwd\`/../.." >&5
-echo "$as_me: error: cannot find install-sh or install.sh in \`cd $srcdir;pwd\`/../.. $srcdir/\`cd $srcdir;pwd\`/../.." >&2;}
- { (exit 1); exit 1; }; }
-fi
-ac_config_guess="$SHELL $ac_aux_dir/config.guess"
-ac_config_sub="$SHELL $ac_aux_dir/config.sub"
-ac_configure="$SHELL $ac_aux_dir/configure" # This should be Cygnus configure.
-
# Make sure we can run config.sub.
$ac_config_sub sun4 >/dev/null 2>&1 ||
{ { echo "$as_me:$LINENO: error: cannot run $ac_config_sub" >&5
fi],[sim_xor_endian=""])dnl
-AC_CONFIG_AUX_DIR(`cd $srcdir;pwd`/../..)
AC_CANONICAL_SYSTEM
AC_ARG_PROGRAM
+2005-01-11 Andrew Cagney <cagney@localhost.localdomain>
+
+ * configure: Regenerated to track ../common/aclocal.m4 changes.
+
2005-01-07 Andrew Cagney <cagney@gnu.org>
* configure.ac: Rename configure.in, require autoconf 2.59.
+ac_aux_dir=
+for ac_dir in $srcdir $srcdir/.. $srcdir/../..; do
+ if test -f $ac_dir/install-sh; then
+ ac_aux_dir=$ac_dir
+ ac_install_sh="$ac_aux_dir/install-sh -c"
+ break
+ elif test -f $ac_dir/install.sh; then
+ ac_aux_dir=$ac_dir
+ ac_install_sh="$ac_aux_dir/install.sh -c"
+ break
+ elif test -f $ac_dir/shtool; then
+ ac_aux_dir=$ac_dir
+ ac_install_sh="$ac_aux_dir/shtool install -c"
+ break
+ fi
+done
+if test -z "$ac_aux_dir"; then
+ { { echo "$as_me:$LINENO: error: cannot find install-sh or install.sh in $srcdir $srcdir/.. $srcdir/../.." >&5
+echo "$as_me: error: cannot find install-sh or install.sh in $srcdir $srcdir/.. $srcdir/../.." >&2;}
+ { (exit 1); exit 1; }; }
+fi
+ac_config_guess="$SHELL $ac_aux_dir/config.guess"
+ac_config_sub="$SHELL $ac_aux_dir/config.sub"
+ac_configure="$SHELL $ac_aux_dir/configure" # This should be Cygnus configure.
+
# Make sure we can run config.sub.
$ac_config_sub sun4 >/dev/null 2>&1 ||
{ { echo "$as_me:$LINENO: error: cannot run $ac_config_sub" >&5
# autoconf.info says this should be called right after AC_INIT.
ac_config_headers="$ac_config_headers config.h:config.in"
-
-ac_aux_dir=
-for ac_dir in `cd $srcdir;pwd`/../.. $srcdir/`cd $srcdir;pwd`/../..; do
- if test -f $ac_dir/install-sh; then
- ac_aux_dir=$ac_dir
- ac_install_sh="$ac_aux_dir/install-sh -c"
- break
- elif test -f $ac_dir/install.sh; then
- ac_aux_dir=$ac_dir
- ac_install_sh="$ac_aux_dir/install.sh -c"
- break
- elif test -f $ac_dir/shtool; then
- ac_aux_dir=$ac_dir
- ac_install_sh="$ac_aux_dir/shtool install -c"
- break
- fi
-done
-if test -z "$ac_aux_dir"; then
- { { echo "$as_me:$LINENO: error: cannot find install-sh or install.sh in \`cd $srcdir;pwd\`/../.. $srcdir/\`cd $srcdir;pwd\`/../.." >&5
-echo "$as_me: error: cannot find install-sh or install.sh in \`cd $srcdir;pwd\`/../.. $srcdir/\`cd $srcdir;pwd\`/../.." >&2;}
- { (exit 1); exit 1; }; }
-fi
-ac_config_guess="$SHELL $ac_aux_dir/config.guess"
-ac_config_sub="$SHELL $ac_aux_dir/config.sub"
-ac_configure="$SHELL $ac_aux_dir/configure" # This should be Cygnus configure.
-
echo "$as_me:$LINENO: checking target system type" >&5
echo $ECHO_N "checking target system type... $ECHO_C" >&6
if test "${ac_cv_target+set}" = set; then
cgen_breaks="break cgen_rtx_error";
fi
- ac_config_files="$ac_config_files Makefile.sim:Makefile.in Make-common.sim:../common/Make-common.in .gdbinit:../common/gdbinit.in"
- ac_config_commands="$ac_config_commands default"
+ ac_config_files="$ac_config_files Makefile.sim:Makefile.in"
+
+ ac_config_files="$ac_config_files Make-common.sim:../common/Make-common.in"
+
+ ac_config_files="$ac_config_files .gdbinit:../common/gdbinit.in"
+
+ ac_config_commands="$ac_config_commands Makefile"
+
+ ac_config_commands="$ac_config_commands stamp-h"
+
cat >confcache <<\_ACEOF
# This file is a shell script that caches the results of configure
# tests run on this system so they can be shared between configure
"Make-common.sim" ) CONFIG_FILES="$CONFIG_FILES Make-common.sim:../common/Make-common.in" ;;
".gdbinit" ) CONFIG_FILES="$CONFIG_FILES .gdbinit:../common/gdbinit.in" ;;
"$ac_config_links_1" ) CONFIG_LINKS="$CONFIG_LINKS $ac_config_links_1" ;;
- "default" ) CONFIG_COMMANDS="$CONFIG_COMMANDS default" ;;
+ "Makefile" ) CONFIG_COMMANDS="$CONFIG_COMMANDS Makefile" ;;
+ "stamp-h" ) CONFIG_COMMANDS="$CONFIG_COMMANDS stamp-h" ;;
"config.h" ) CONFIG_HEADERS="$CONFIG_HEADERS config.h:config.in" ;;
*) { { echo "$as_me:$LINENO: error: invalid argument: $ac_config_target" >&5
echo "$as_me: error: invalid argument: $ac_config_target" >&2;}
{ echo "$as_me:$LINENO: executing $ac_dest commands" >&5
echo "$as_me: executing $ac_dest commands" >&6;}
case $ac_dest in
- default ) case "x$CONFIG_FILES" in
- xMakefile*)
- echo "Merging Makefile.sim+Make-common.sim into Makefile ..."
- rm -f Makesim1.tmp Makesim2.tmp Makefile
- sed -n -e '/^## COMMON_PRE_/,/^## End COMMON_PRE_/ p' <Make-common.sim >Makesim1.tmp
- sed -n -e '/^## COMMON_POST_/,/^## End COMMON_POST_/ p' <Make-common.sim >Makesim2.tmp
- sed -e '/^## COMMON_PRE_/ r Makesim1.tmp' \
+ Makefile ) echo "Merging Makefile.sim+Make-common.sim into Makefile ..."
+ rm -f Makesim1.tmp Makesim2.tmp Makefile
+ sed -n -e '/^## COMMON_PRE_/,/^## End COMMON_PRE_/ p' <Make-common.sim >Makesim1.tmp
+ sed -n -e '/^## COMMON_POST_/,/^## End COMMON_POST_/ p' <Make-common.sim >Makesim2.tmp
+ sed -e '/^## COMMON_PRE_/ r Makesim1.tmp' \
-e '/^## COMMON_POST_/ r Makesim2.tmp' \
<Makefile.sim >Makefile
- rm -f Makefile.sim Make-common.sim Makesim1.tmp Makesim2.tmp
- ;;
- esac
- case "x$CONFIG_HEADERS" in xconfig.h:config.in) echo > stamp-h ;; esac
+ rm -f Makefile.sim Make-common.sim Makesim1.tmp Makesim2.tmp
;;
+ stamp-h ) echo > stamp-h ;;
esac
done
_ACEOF
+2005-01-11 Andrew Cagney <cagney@localhost.localdomain>
+
+ * configure: Regenerated to track ../common/aclocal.m4 changes.
+
2005-01-07 Andrew Cagney <cagney@gnu.org>
* configure.ac: Rename configure.in, require autoconf 2.59.
+2005-01-11 Andrew Cagney <cagney@localhost.localdomain>
+
+ * configure: Regenerated to track ../common/aclocal.m4 changes.
+
2005-01-07 Andrew Cagney <cagney@gnu.org>
* configure.ac: Rename configure.in, require autoconf 2.59.
+ac_aux_dir=
+for ac_dir in $srcdir $srcdir/.. $srcdir/../..; do
+ if test -f $ac_dir/install-sh; then
+ ac_aux_dir=$ac_dir
+ ac_install_sh="$ac_aux_dir/install-sh -c"
+ break
+ elif test -f $ac_dir/install.sh; then
+ ac_aux_dir=$ac_dir
+ ac_install_sh="$ac_aux_dir/install.sh -c"
+ break
+ elif test -f $ac_dir/shtool; then
+ ac_aux_dir=$ac_dir
+ ac_install_sh="$ac_aux_dir/shtool install -c"
+ break
+ fi
+done
+if test -z "$ac_aux_dir"; then
+ { { echo "$as_me:$LINENO: error: cannot find install-sh or install.sh in $srcdir $srcdir/.. $srcdir/../.." >&5
+echo "$as_me: error: cannot find install-sh or install.sh in $srcdir $srcdir/.. $srcdir/../.." >&2;}
+ { (exit 1); exit 1; }; }
+fi
+ac_config_guess="$SHELL $ac_aux_dir/config.guess"
+ac_config_sub="$SHELL $ac_aux_dir/config.sub"
+ac_configure="$SHELL $ac_aux_dir/configure" # This should be Cygnus configure.
+
# Make sure we can run config.sub.
$ac_config_sub sun4 >/dev/null 2>&1 ||
{ { echo "$as_me:$LINENO: error: cannot run $ac_config_sub" >&5
# autoconf.info says this should be called right after AC_INIT.
ac_config_headers="$ac_config_headers config.h:config.in"
-
-ac_aux_dir=
-for ac_dir in `cd $srcdir;pwd`/../.. $srcdir/`cd $srcdir;pwd`/../..; do
- if test -f $ac_dir/install-sh; then
- ac_aux_dir=$ac_dir
- ac_install_sh="$ac_aux_dir/install-sh -c"
- break
- elif test -f $ac_dir/install.sh; then
- ac_aux_dir=$ac_dir
- ac_install_sh="$ac_aux_dir/install.sh -c"
- break
- elif test -f $ac_dir/shtool; then
- ac_aux_dir=$ac_dir
- ac_install_sh="$ac_aux_dir/shtool install -c"
- break
- fi
-done
-if test -z "$ac_aux_dir"; then
- { { echo "$as_me:$LINENO: error: cannot find install-sh or install.sh in \`cd $srcdir;pwd\`/../.. $srcdir/\`cd $srcdir;pwd\`/../.." >&5
-echo "$as_me: error: cannot find install-sh or install.sh in \`cd $srcdir;pwd\`/../.. $srcdir/\`cd $srcdir;pwd\`/../.." >&2;}
- { (exit 1); exit 1; }; }
-fi
-ac_config_guess="$SHELL $ac_aux_dir/config.guess"
-ac_config_sub="$SHELL $ac_aux_dir/config.sub"
-ac_configure="$SHELL $ac_aux_dir/configure" # This should be Cygnus configure.
-
echo "$as_me:$LINENO: checking target system type" >&5
echo $ECHO_N "checking target system type... $ECHO_C" >&6
if test "${ac_cv_target+set}" = set; then
cgen_breaks="break cgen_rtx_error";
fi
- ac_config_files="$ac_config_files Makefile.sim:Makefile.in Make-common.sim:../common/Make-common.in .gdbinit:../common/gdbinit.in"
- ac_config_commands="$ac_config_commands default"
+ ac_config_files="$ac_config_files Makefile.sim:Makefile.in"
+
+ ac_config_files="$ac_config_files Make-common.sim:../common/Make-common.in"
+
+ ac_config_files="$ac_config_files .gdbinit:../common/gdbinit.in"
+
+ ac_config_commands="$ac_config_commands Makefile"
+
+ ac_config_commands="$ac_config_commands stamp-h"
+
cat >confcache <<\_ACEOF
# This file is a shell script that caches the results of configure
# tests run on this system so they can be shared between configure
"Make-common.sim" ) CONFIG_FILES="$CONFIG_FILES Make-common.sim:../common/Make-common.in" ;;
".gdbinit" ) CONFIG_FILES="$CONFIG_FILES .gdbinit:../common/gdbinit.in" ;;
"$ac_config_links_1" ) CONFIG_LINKS="$CONFIG_LINKS $ac_config_links_1" ;;
- "default" ) CONFIG_COMMANDS="$CONFIG_COMMANDS default" ;;
+ "Makefile" ) CONFIG_COMMANDS="$CONFIG_COMMANDS Makefile" ;;
+ "stamp-h" ) CONFIG_COMMANDS="$CONFIG_COMMANDS stamp-h" ;;
"config.h" ) CONFIG_HEADERS="$CONFIG_HEADERS config.h:config.in" ;;
*) { { echo "$as_me:$LINENO: error: invalid argument: $ac_config_target" >&5
echo "$as_me: error: invalid argument: $ac_config_target" >&2;}
{ echo "$as_me:$LINENO: executing $ac_dest commands" >&5
echo "$as_me: executing $ac_dest commands" >&6;}
case $ac_dest in
- default ) case "x$CONFIG_FILES" in
- xMakefile*)
- echo "Merging Makefile.sim+Make-common.sim into Makefile ..."
- rm -f Makesim1.tmp Makesim2.tmp Makefile
- sed -n -e '/^## COMMON_PRE_/,/^## End COMMON_PRE_/ p' <Make-common.sim >Makesim1.tmp
- sed -n -e '/^## COMMON_POST_/,/^## End COMMON_POST_/ p' <Make-common.sim >Makesim2.tmp
- sed -e '/^## COMMON_PRE_/ r Makesim1.tmp' \
+ Makefile ) echo "Merging Makefile.sim+Make-common.sim into Makefile ..."
+ rm -f Makesim1.tmp Makesim2.tmp Makefile
+ sed -n -e '/^## COMMON_PRE_/,/^## End COMMON_PRE_/ p' <Make-common.sim >Makesim1.tmp
+ sed -n -e '/^## COMMON_POST_/,/^## End COMMON_POST_/ p' <Make-common.sim >Makesim2.tmp
+ sed -e '/^## COMMON_PRE_/ r Makesim1.tmp' \
-e '/^## COMMON_POST_/ r Makesim2.tmp' \
<Makefile.sim >Makefile
- rm -f Makefile.sim Make-common.sim Makesim1.tmp Makesim2.tmp
- ;;
- esac
- case "x$CONFIG_HEADERS" in xconfig.h:config.in) echo > stamp-h ;; esac
+ rm -f Makefile.sim Make-common.sim Makesim1.tmp Makesim2.tmp
;;
+ stamp-h ) echo > stamp-h ;;
esac
done
_ACEOF
projects / binutils-gdb.git / commitdiff