+2016-11-17 Simon Marchi <simon.marchi@polymtl.ca>
+
+ * Makefile.in: Remove @GMAKE_TRUE@ prefixes and removes lines
+ prefixed with @GMAKE_FALSE@. Update comment related to non-GNU
+ make.
+ * configure.ac: Remove checks for the make program.
+ * configure: Re-generate.
+
2016-11-17 Simon Marchi <simon.marchi@polymtl.ca>
* NEWS: Mention requirement of GNU make.
$(POSTCOMPILE)
#
-# Dependency tracking. Most of this is conditional on GNU Make being
-# found by configure; if GNU Make is not found, we fall back to a
-# simpler scheme.
+# Dependency tracking.
#
-@GMAKE_TRUE@ifeq ($(DEPMODE),depmode=gcc3)
+ifeq ($(DEPMODE),depmode=gcc3)
# Note that we put the dependencies into a .Tpo file, then move them
# into place if the compile succeeds. We need this because gcc does
# not atomically write the dependency output file.
-@GMAKE_TRUE@override COMPILE.post = -c -o $@ -MT $@ -MMD -MP \
-@GMAKE_TRUE@ -MF $(DEPDIR)/$(basename $(@F)).Tpo
-@GMAKE_TRUE@override POSTCOMPILE = @mv $(DEPDIR)/$(basename $(@F)).Tpo \
-@GMAKE_TRUE@ $(DEPDIR)/$(basename $(@F)).Po
-@GMAKE_TRUE@else
-@GMAKE_TRUE@override COMPILE.pre = source='$<' object='$@' libtool=no \
-@GMAKE_TRUE@ DEPDIR=$(DEPDIR) $(DEPMODE) $(depcomp) $(CC)
+override COMPILE.post = -c -o $@ -MT $@ -MMD -MP \
+ -MF $(DEPDIR)/$(basename $(@F)).Tpo
+override POSTCOMPILE = @mv $(DEPDIR)/$(basename $(@F)).Tpo \
+ $(DEPDIR)/$(basename $(@F)).Po
+else
+override COMPILE.pre = source='$<' object='$@' libtool=no \
+ DEPDIR=$(DEPDIR) $(DEPMODE) $(depcomp) $(CC)
# depcomp handles atomicity for us, so we don't need a postcompile
# step.
-@GMAKE_TRUE@override POSTCOMPILE =
-@GMAKE_TRUE@endif
+override POSTCOMPILE =
+endif
# A list of all the objects we might care about in this build, for
# dependency tracking.
# Ensure that generated files are created early. Use order-only
# dependencies if available. They require GNU make 3.80 or newer,
# and the .VARIABLES variable was introduced at the same time.
-@GMAKE_TRUE@ifdef .VARIABLES
-@GMAKE_TRUE@$(all_object_files): | $(generated_files)
-@GMAKE_TRUE@else
+ifdef .VARIABLES
+$(all_object_files): | $(generated_files)
+else
$(all_object_files) : $(generated_files)
-@GMAKE_TRUE@endif
+endif
# Dependencies.
-@GMAKE_TRUE@-include $(patsubst %.o, $(DEPDIR)/%.Po, $(all_object_files))
+-include $(patsubst %.o, $(DEPDIR)/%.Po, $(all_object_files))
### end of the gdb Makefile.in.
LIBINTL_DEP
LIBINTL
USE_NLS
-SET_MAKE
-GMAKE_FALSE
-GMAKE_TRUE
-MAKE
CCDEPMODE
DEPDIR
am__leading_dot
fi
-# Check for the 'make' the user wants to use.
-for ac_prog in make
-do
- # Extract the first word of "$ac_prog", so it can be a program name with args.
-set dummy $ac_prog; ac_word=$2
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
-$as_echo_n "checking for $ac_word... " >&6; }
-if test "${ac_cv_prog_MAKE+set}" = set; then :
- $as_echo_n "(cached) " >&6
-else
- if test -n "$MAKE"; then
- ac_cv_prog_MAKE="$MAKE" # Let the user override the test.
-else
-as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
- IFS=$as_save_IFS
- test -z "$as_dir" && as_dir=.
- for ac_exec_ext in '' $ac_executable_extensions; do
- if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
- ac_cv_prog_MAKE="$ac_prog"
- $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
- break 2
- fi
-done
- done
-IFS=$as_save_IFS
-
-fi
-fi
-MAKE=$ac_cv_prog_MAKE
-if test -n "$MAKE"; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: $MAKE" >&5
-$as_echo "$MAKE" >&6; }
-else
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
-$as_echo "no" >&6; }
-fi
-
-
- test -n "$MAKE" && break
-done
-
-MAKE_IS_GNU=
-case "`$MAKE --version 2>&1 | sed 1q`" in
- *GNU*)
- MAKE_IS_GNU=yes
- ;;
-esac
- if test "$MAKE_IS_GNU" = yes; then
- GMAKE_TRUE=
- GMAKE_FALSE='#'
-else
- GMAKE_TRUE='#'
- GMAKE_FALSE=
-fi
-
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether ${MAKE-make} sets \$(MAKE)" >&5
-$as_echo_n "checking whether ${MAKE-make} sets \$(MAKE)... " >&6; }
-set x ${MAKE-make}
-ac_make=`$as_echo "$2" | sed 's/+/p/g; s/[^a-zA-Z0-9_]/_/g'`
-if { as_var=ac_cv_prog_make_${ac_make}_set; eval "test \"\${$as_var+set}\" = set"; }; then :
- $as_echo_n "(cached) " >&6
-else
- cat >conftest.make <<\_ACEOF
-SHELL = /bin/sh
-all:
- @echo '@@@%%%=$(MAKE)=@@@%%%'
-_ACEOF
-# GNU make sometimes prints "make[1]: Entering...", which would confuse us.
-case `${MAKE-make} -f conftest.make 2>/dev/null` in
- *@@@%%%=?*=@@@%%%*)
- eval ac_cv_prog_make_${ac_make}_set=yes;;
- *)
- eval ac_cv_prog_make_${ac_make}_set=no;;
-esac
-rm -f conftest.make
-fi
-if eval test \$ac_cv_prog_make_${ac_make}_set = yes; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5
-$as_echo "yes" >&6; }
- SET_MAKE=
-else
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
-$as_echo "no" >&6; }
- SET_MAKE="MAKE=${MAKE-make}"
-fi
-
-
gnulib_extra_configure_args=
# If large-file support is disabled, make sure gnulib does the same.
if test "$enable_largefile" = no; then
as_fn_error "conditional \"MAINTAINER_MODE\" was never defined.
Usually this means the macro was only invoked conditionally." "$LINENO" 5
fi
-if test -z "${GMAKE_TRUE}" && test -z "${GMAKE_FALSE}"; then
- as_fn_error "conditional \"GMAKE\" was never defined.
-Usually this means the macro was only invoked conditionally." "$LINENO" 5
-fi
if test -z "${HAVE_PYTHON_TRUE}" && test -z "${HAVE_PYTHON_FALSE}"; then
as_fn_error "conditional \"HAVE_PYTHON\" was never defined.
Usually this means the macro was only invoked conditionally." "$LINENO" 5
ZW_CREATE_DEPDIR
ZW_PROG_COMPILER_DEPENDENCIES([CC])
-# Check for the 'make' the user wants to use.
-AC_CHECK_PROGS(MAKE, make)
-MAKE_IS_GNU=
-case "`$MAKE --version 2>&1 | sed 1q`" in
- *GNU*)
- MAKE_IS_GNU=yes
- ;;
-esac
-AM_CONDITIONAL(GMAKE, test "$MAKE_IS_GNU" = yes)
-AC_PROG_MAKE_SET
-
gnulib_extra_configure_args=
# If large-file support is disabled, make sure gnulib does the same.
if test "$enable_largefile" = no; then
+2016-11-17 Simon Marchi <simon.marchi@polymtl.ca>
+
+ * Makefile.in: Remove @GMAKE_TRUE@ prefixes and removes lines
+ prefixed with @GMAKE_FALSE@. Update comment related to non-GNU
+ make.
+ * configure.ac: Remove checks for the make program.
+ * configure: Re-generate.
+
2016-10-28 Pedro Alves <palves@redhat.com>
* Makefile.in (CXX_DIALECT): Get from configure.
$(SHELL) $(regdat_sh) $(srcdir)/../regformats/reg-tilegx32.dat reg-tilegx32.c
#
-# Dependency tracking. Most of this is conditional on GNU Make being
-# found by configure; if GNU Make is not found, we fall back to a
-# simpler scheme.
+# Dependency tracking.
#
-@GMAKE_TRUE@ifeq ($(DEPMODE),depmode=gcc3)
+ifeq ($(DEPMODE),depmode=gcc3)
# Note that we put the dependencies into a .Tpo file, then move them
# into place if the compile succeeds. We need this because gcc does
# not atomically write the dependency output file.
-@GMAKE_TRUE@override COMPILE.post = -c -o $@ -MT $@ -MMD -MP \
-@GMAKE_TRUE@ -MF $(DEPDIR)/$(basename $(@F)).Tpo
-@GMAKE_TRUE@override POSTCOMPILE = @mv $(DEPDIR)/$(basename $(@F)).Tpo \
-@GMAKE_TRUE@ $(DEPDIR)/$(basename $(@F)).Po
-@GMAKE_TRUE@else
-@GMAKE_TRUE@override COMPILE.pre = source='$<' object='$@' libtool=no \
-@GMAKE_TRUE@ DEPDIR=$(DEPDIR) $(DEPMODE) $(depcomp) $(CC)
+override COMPILE.post = -c -o $@ -MT $@ -MMD -MP \
+ -MF $(DEPDIR)/$(basename $(@F)).Tpo
+override POSTCOMPILE = @mv $(DEPDIR)/$(basename $(@F)).Tpo \
+ $(DEPDIR)/$(basename $(@F)).Po
+else
+override COMPILE.pre = source='$<' object='$@' libtool=no \
+ DEPDIR=$(DEPDIR) $(DEPMODE) $(depcomp) $(CC)
# depcomp handles atomicity for us, so we don't need a postcompile
# step.
-@GMAKE_TRUE@override POSTCOMPILE =
-@GMAKE_TRUE@endif
+override POSTCOMPILE =
+endif
# A list of all the objects we might care about in this build, for
# dependency tracking.
# Ensure that generated files are created early. Use order-only
# dependencies if available. They require GNU make 3.80 or newer,
# and the .VARIABLES variable was introduced at the same time.
-@GMAKE_TRUE@ifdef .VARIABLES
-@GMAKE_TRUE@$(all_object_files): | $(generated_files)
-@GMAKE_TRUE@else
+ifdef .VARIABLES
+$(all_object_files): | $(generated_files)
+else
$(all_object_files) : $(generated_files)
-@GMAKE_TRUE@endif
+endif
# Dependencies.
-@GMAKE_TRUE@-include $(patsubst %.o, $(DEPDIR)/%.Po, $(all_object_files))
+-include $(patsubst %.o, $(DEPDIR)/%.Po, $(all_object_files))
# This is the end of "Makefile.in".
ustinc
ustlibs
ALLOCA
-SET_MAKE
-GMAKE_FALSE
-GMAKE_TRUE
-MAKE
CCDEPMODE
DEPDIR
am__leading_dot
fi
-# Check for the 'make' the user wants to use.
-for ac_prog in make
-do
- # Extract the first word of "$ac_prog", so it can be a program name with args.
-set dummy $ac_prog; ac_word=$2
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
-$as_echo_n "checking for $ac_word... " >&6; }
-if test "${ac_cv_prog_MAKE+set}" = set; then :
- $as_echo_n "(cached) " >&6
-else
- if test -n "$MAKE"; then
- ac_cv_prog_MAKE="$MAKE" # Let the user override the test.
-else
-as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
- IFS=$as_save_IFS
- test -z "$as_dir" && as_dir=.
- for ac_exec_ext in '' $ac_executable_extensions; do
- if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
- ac_cv_prog_MAKE="$ac_prog"
- $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
- break 2
- fi
-done
- done
-IFS=$as_save_IFS
-
-fi
-fi
-MAKE=$ac_cv_prog_MAKE
-if test -n "$MAKE"; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: $MAKE" >&5
-$as_echo "$MAKE" >&6; }
-else
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
-$as_echo "no" >&6; }
-fi
-
-
- test -n "$MAKE" && break
-done
-
-MAKE_IS_GNU=
-case "`$MAKE --version 2>&1 | sed 1q`" in
- *GNU*)
- MAKE_IS_GNU=yes
- ;;
-esac
- if test "$MAKE_IS_GNU" = yes; then
- GMAKE_TRUE=
- GMAKE_FALSE='#'
-else
- GMAKE_TRUE='#'
- GMAKE_FALSE=
-fi
-
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether ${MAKE-make} sets \$(MAKE)" >&5
-$as_echo_n "checking whether ${MAKE-make} sets \$(MAKE)... " >&6; }
-set x ${MAKE-make}
-ac_make=`$as_echo "$2" | sed 's/+/p/g; s/[^a-zA-Z0-9_]/_/g'`
-if { as_var=ac_cv_prog_make_${ac_make}_set; eval "test \"\${$as_var+set}\" = set"; }; then :
- $as_echo_n "(cached) " >&6
-else
- cat >conftest.make <<\_ACEOF
-SHELL = /bin/sh
-all:
- @echo '@@@%%%=$(MAKE)=@@@%%%'
-_ACEOF
-# GNU make sometimes prints "make[1]: Entering...", which would confuse us.
-case `${MAKE-make} -f conftest.make 2>/dev/null` in
- *@@@%%%=?*=@@@%%%*)
- eval ac_cv_prog_make_${ac_make}_set=yes;;
- *)
- eval ac_cv_prog_make_${ac_make}_set=no;;
-esac
-rm -f conftest.make
-fi
-if eval test \$ac_cv_prog_make_${ac_make}_set = yes; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5
-$as_echo "yes" >&6; }
- SET_MAKE=
-else
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
-$as_echo "no" >&6; }
- SET_MAKE="MAKE=${MAKE-make}"
-fi
-
-
gnulib_extra_configure_args=
# If large-file support is disabled, make sure gnulib does the same.
if test "$enable_largefile" = no; then
as_fn_error "conditional \"MAINTAINER_MODE\" was never defined.
Usually this means the macro was only invoked conditionally." "$LINENO" 5
fi
-if test -z "${GMAKE_TRUE}" && test -z "${GMAKE_FALSE}"; then
- as_fn_error "conditional \"GMAKE\" was never defined.
-Usually this means the macro was only invoked conditionally." "$LINENO" 5
-fi
: ${CONFIG_STATUS=./config.status}
ac_write_fail=0
ZW_CREATE_DEPDIR
ZW_PROG_COMPILER_DEPENDENCIES([CC])
-# Check for the 'make' the user wants to use.
-AC_CHECK_PROGS(MAKE, make)
-MAKE_IS_GNU=
-case "`$MAKE --version 2>&1 | sed 1q`" in
- *GNU*)
- MAKE_IS_GNU=yes
- ;;
-esac
-AM_CONDITIONAL(GMAKE, test "$MAKE_IS_GNU" = yes)
-AC_PROG_MAKE_SET
-
gnulib_extra_configure_args=
# If large-file support is disabled, make sure gnulib does the same.
if test "$enable_largefile" = no; then
+2016-11-17 Simon Marchi <simon.marchi@polymtl.ca>
+
+ * Makefile.in: Remove @GMAKE_TRUE@ prefixes and removes lines
+ prefixed with @GMAKE_FALSE@. Update comment related to non-GNU
+ make.
+ * configure.ac: Remove checks for the make program.
+ * configure: Re-generate.
+
2016-11-16 Kevin Buettner <kevinb@redhat.com>
* gdb.python/py-recurse-unwind.c (main): Add loop.
# See whether -j was given to make. Either it was given with no
# arguments, and appears as "j" in the first word, or it was given an
# argument and appears as "-j" in a separate word.
-@GMAKE_TRUE@saw_dash_j = $(or $(findstring j,$(firstword $(MAKEFLAGS))),$(filter -j,$(MAKEFLAGS)))
+saw_dash_j = $(or $(findstring j,$(firstword $(MAKEFLAGS))),$(filter -j,$(MAKEFLAGS)))
-# For GNU make, try to run the tests in parallel if any -j option is
-# given. If RUNTESTFLAGS is not empty, then by default the tests will
-# be serialized. This can be overridden by setting FORCE_PARALLEL to
-# any non-empty value. For a non-GNU make, do not parallelize.
-@GMAKE_TRUE@CHECK_TARGET_TMP = $(if $(FORCE_PARALLEL),check-parallel,$(if $(RUNTESTFLAGS),check-single,$(if $(saw_dash_j),check-parallel,check-single)))
-@GMAKE_TRUE@CHECK_TARGET = $(if $(RACY_ITER),$(addsuffix -racy,$(CHECK_TARGET_TMP)),$(CHECK_TARGET_TMP))
-@GMAKE_FALSE@CHECK_TARGET = check-single
+# Try to run the tests in parallel if any -j option is given. If RUNTESTFLAGS
+# is not empty, then by default the tests will be serialized. This can be
+# overridden by setting FORCE_PARALLEL to any non-empty value.
+CHECK_TARGET_TMP = $(if $(FORCE_PARALLEL),check-parallel,$(if $(RUNTESTFLAGS),check-single,$(if $(saw_dash_j),check-parallel,check-single)))
+CHECK_TARGET = $(if $(RACY_ITER),$(addsuffix -racy,$(CHECK_TARGET_TMP)),$(CHECK_TARGET_TMP))
# Note that we must resort to a recursive make invocation here,
# because GNU make 3.82 has a bug preventing MAKEFLAGS from being used
# of tests. For consistency we support it for check-single as well.
# To specify all tests in a subdirectory, use TESTS=gdb.subdir/*.exp.
# E.g., make check TESTS="gdb.server/*.exp gdb.threads/*.exp".
-@GMAKE_TRUE@TESTS :=
-@GMAKE_FALSE@TESTS =
+TESTS :=
-@GMAKE_TRUE@ifeq ($(strip $(TESTS)),)
-@GMAKE_TRUE@expanded_tests_or_none :=
-@GMAKE_TRUE@else
-@GMAKE_TRUE@expanded_tests := $(patsubst $(srcdir)/%,%,$(wildcard $(addprefix $(srcdir)/,$(TESTS))))
-@GMAKE_TRUE@expanded_tests_or_none := $(or $(expanded_tests),no-matching-tests-found)
-@GMAKE_TRUE@endif
-@GMAKE_FALSE@expanded_tests_or_none = $(TESTS)
+ifeq ($(strip $(TESTS)),)
+expanded_tests_or_none :=
+else
+expanded_tests := $(patsubst $(srcdir)/%,%,$(wildcard $(addprefix $(srcdir)/,$(TESTS))))
+expanded_tests_or_none := $(or $(expanded_tests),no-matching-tests-found)
+endif
# Shorthand for running all the tests in a single directory.
-@GMAKE_TRUE@check-gdb.%:
-@GMAKE_TRUE@ $(MAKE) check TESTS="gdb.$*/*.exp"
+check-gdb.%:
+ $(MAKE) check TESTS="gdb.$*/*.exp"
check-single:
$(DO_RUNTEST) $(RUNTESTFLAGS) $(expanded_tests_or_none)
# them to the front of the list to try to lessen the overall time
# taken by the test suite -- if one of these tests happens to be run
# late, it will cause the overall time to increase.
-@GMAKE_TRUE@ifeq ($(strip $(TESTS)),)
+ifeq ($(strip $(TESTS)),)
slow_tests = gdb.base/break-interp.exp gdb.base/interp.exp \
gdb.base/multi-forks.exp
-@GMAKE_TRUE@all_tests := $(shell cd $(srcdir) && find gdb.* -name '*.exp' -print)
-@GMAKE_TRUE@reordered_tests := $(slow_tests) $(filter-out $(slow_tests),$(all_tests))
-@GMAKE_TRUE@TEST_TARGETS := $(addprefix $(if $(RACY_ITER),check-racy,check)/,$(reordered_tests))
-@GMAKE_TRUE@else
-@GMAKE_TRUE@TEST_TARGETS := $(addprefix $(if $(RACY_ITER),check-racy,check)/,$(expanded_tests_or_none))
-@GMAKE_TRUE@endif
+all_tests := $(shell cd $(srcdir) && find gdb.* -name '*.exp' -print)
+reordered_tests := $(slow_tests) $(filter-out $(slow_tests),$(all_tests))
+TEST_TARGETS := $(addprefix $(if $(RACY_ITER),check-racy,check)/,$(reordered_tests))
+else
+TEST_TARGETS := $(addprefix $(if $(RACY_ITER),check-racy,check)/,$(expanded_tests_or_none))
+endif
do-check-parallel: $(TEST_TARGETS)
@:
-@GMAKE_TRUE@check/%.exp:
-@GMAKE_TRUE@ -mkdir -p outputs/$*
-@GMAKE_TRUE@ @$(DO_RUNTEST) GDB_PARALLEL=yes --outdir=outputs/$* $*.exp $(RUNTESTFLAGS)
+check/%.exp:
+ -mkdir -p outputs/$*
+ @$(DO_RUNTEST) GDB_PARALLEL=yes --outdir=outputs/$* $*.exp $(RUNTESTFLAGS)
do-check-parallel-racy: $(TEST_TARGETS)
@:
-@GMAKE_TRUE@check-racy/%.exp:
-@GMAKE_TRUE@ -mkdir -p racy_outputs/$(RACY_OUTPUT_N)/$*
-@GMAKE_TRUE@ $(DO_RUNTEST) GDB_PARALLEL=yes \
-@GMAKE_TRUE@ --outdir=racy_outputs/$(RACY_OUTPUT_N)/$* $*.exp \
-@GMAKE_TRUE@ $(RUNTESTFLAGS)
+check-racy/%.exp:
+ -mkdir -p racy_outputs/$(RACY_OUTPUT_N)/$*
+ $(DO_RUNTEST) GDB_PARALLEL=yes \
+ --outdir=racy_outputs/$(RACY_OUTPUT_N)/$* $*.exp \
+ $(RUNTESTFLAGS)
check/no-matching-tests-found:
@echo ""
@echo ""
# Utility rule invoked by step 2 of the build-perf rule.
-@GMAKE_TRUE@workers/%.worker:
-@GMAKE_TRUE@ mkdir -p gdb.perf/outputs/$*
-@GMAKE_TRUE@ $(DO_RUNTEST) --outdir=gdb.perf/outputs/$* lib/build-piece.exp WORKER=$* GDB_PARALLEL=gdb.perf $(RUNTESTFLAGS) GDB_PERFTEST_MODE=compile GDB_PERFTEST_SUBMODE=build-pieces
+workers/%.worker:
+ mkdir -p gdb.perf/outputs/$*
+ $(DO_RUNTEST) --outdir=gdb.perf/outputs/$* lib/build-piece.exp WORKER=$* GDB_PARALLEL=gdb.perf $(RUNTESTFLAGS) GDB_PERFTEST_MODE=compile GDB_PERFTEST_SUBMODE=build-pieces
# Utility rule to build tests that support it in parallel.
# The build is broken into 3 steps distinguished by GDB_PERFTEST_SUBMODE:
# The point of step 1 is to construct the set of worker tasks for step 2.
# All of the information needed by build-piece.exp is contained in the name
# of the generated .worker file.
-@GMAKE_TRUE@build-perf: $(abs_builddir)/site.exp
-@GMAKE_TRUE@ rm -rf gdb.perf/workers
-@GMAKE_TRUE@ mkdir -p gdb.perf/workers
-@GMAKE_TRUE@ @: Step 1: Generate the build .worker files.
-@GMAKE_TRUE@ $(DO_RUNTEST) --directory=gdb.perf --outdir gdb.perf/workers GDB_PARALLEL=gdb.perf $(RUNTESTFLAGS) GDB_PERFTEST_MODE=compile GDB_PERFTEST_SUBMODE=gen-workers
-@GMAKE_TRUE@ @: Step 2: Compile the pieces. Here is the build parallelism.
-@GMAKE_TRUE@ $(MAKE) $$(cd gdb.perf && echo workers/*/*.worker)
-@GMAKE_TRUE@ @: Step 3: Do the final link.
-@GMAKE_TRUE@ $(DO_RUNTEST) --directory=gdb.perf --outdir gdb.perf GDB_PARALLEL=gdb.perf $(RUNTESTFLAGS) GDB_PERFTEST_MODE=compile GDB_PERFTEST_SUBMODE=final
+build-perf: $(abs_builddir)/site.exp
+ rm -rf gdb.perf/workers
+ mkdir -p gdb.perf/workers
+ @: Step 1: Generate the build .worker files.
+ $(DO_RUNTEST) --directory=gdb.perf --outdir gdb.perf/workers GDB_PARALLEL=gdb.perf $(RUNTESTFLAGS) GDB_PERFTEST_MODE=compile GDB_PERFTEST_SUBMODE=gen-workers
+ @: Step 2: Compile the pieces. Here is the build parallelism.
+ $(MAKE) $$(cd gdb.perf && echo workers/*/*.worker)
+ @: Step 3: Do the final link.
+ $(DO_RUNTEST) --directory=gdb.perf --outdir gdb.perf GDB_PARALLEL=gdb.perf $(RUNTESTFLAGS) GDB_PERFTEST_MODE=compile GDB_PERFTEST_SUBMODE=final
# The default is to both compile and run the tests.
GDB_PERFTEST_MODE = both
CC
RPATH_ENVVAR
subdirs
-SET_MAKE
-GMAKE_FALSE
-GMAKE_TRUE
-MAKE
target_noncanonical
target_os
target_vendor
-# Check for the 'make' the user wants to use.
-for ac_prog in make
-do
- # Extract the first word of "$ac_prog", so it can be a program name with args.
-set dummy $ac_prog; ac_word=$2
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
-$as_echo_n "checking for $ac_word... " >&6; }
-if test "${ac_cv_prog_MAKE+set}" = set; then :
- $as_echo_n "(cached) " >&6
-else
- if test -n "$MAKE"; then
- ac_cv_prog_MAKE="$MAKE" # Let the user override the test.
-else
-as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
- IFS=$as_save_IFS
- test -z "$as_dir" && as_dir=.
- for ac_exec_ext in '' $ac_executable_extensions; do
- if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
- ac_cv_prog_MAKE="$ac_prog"
- $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
- break 2
- fi
-done
- done
-IFS=$as_save_IFS
-
-fi
-fi
-MAKE=$ac_cv_prog_MAKE
-if test -n "$MAKE"; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: $MAKE" >&5
-$as_echo "$MAKE" >&6; }
-else
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
-$as_echo "no" >&6; }
-fi
-
-
- test -n "$MAKE" && break
-done
-
-MAKE_IS_GNU=
-case "`$MAKE --version 2>&1 | sed 1q`" in
- *GNU*)
- MAKE_IS_GNU=yes
- ;;
-esac
-
-
-if test "$MAKE_IS_GNU" = yes; then
- GMAKE_TRUE=
- GMAKE_FALSE='#'
-else
- GMAKE_TRUE='#'
- GMAKE_FALSE=
-fi
-
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether ${MAKE-make} sets \$(MAKE)" >&5
-$as_echo_n "checking whether ${MAKE-make} sets \$(MAKE)... " >&6; }
-set x ${MAKE-make}
-ac_make=`$as_echo "$2" | sed 's/+/p/g; s/[^a-zA-Z0-9_]/_/g'`
-if { as_var=ac_cv_prog_make_${ac_make}_set; eval "test \"\${$as_var+set}\" = set"; }; then :
- $as_echo_n "(cached) " >&6
-else
- cat >conftest.make <<\_ACEOF
-SHELL = /bin/sh
-all:
- @echo '@@@%%%=$(MAKE)=@@@%%%'
-_ACEOF
-# GNU make sometimes prints "make[1]: Entering...", which would confuse us.
-case `${MAKE-make} -f conftest.make 2>/dev/null` in
- *@@@%%%=?*=@@@%%%*)
- eval ac_cv_prog_make_${ac_make}_set=yes;;
- *)
- eval ac_cv_prog_make_${ac_make}_set=no;;
-esac
-rm -f conftest.make
-fi
-if eval test \$ac_cv_prog_make_${ac_make}_set = yes; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5
-$as_echo "yes" >&6; }
- SET_MAKE=
-else
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
-$as_echo "no" >&6; }
- SET_MAKE="MAKE=${MAKE-make}"
-fi
-
-
# Enable gdbtk.
# Check whether --enable-gdbtk was given.
if test "${enable_gdbtk+set}" = set; then :
LTLIBOBJS=$ac_ltlibobjs
-if test -z "${GMAKE_TRUE}" && test -z "${GMAKE_FALSE}"; then
- as_fn_error "conditional \"GMAKE\" was never defined.
-Usually this means the macro was only invoked conditionally." "$LINENO" 5
-fi
: ${CONFIG_STATUS=./config.status}
ac_write_fail=0
ACX_NONCANONICAL_TARGET
-# Check for the 'make' the user wants to use.
-AC_CHECK_PROGS(MAKE, make)
-MAKE_IS_GNU=
-case "`$MAKE --version 2>&1 | sed 1q`" in
- *GNU*)
- MAKE_IS_GNU=yes
- ;;
-esac
-AM_CONDITIONAL(GMAKE, test "$MAKE_IS_GNU" = yes)
-AC_PROG_MAKE_SET
-
# Enable gdbtk.
AC_ARG_ENABLE(gdbtk,
[ --enable-gtk enable gdbtk graphical user interface (GUI)],,
projects / binutils-gdb.git / commitdiff