rename 45nm to 22nm page

diff --git a/22nm_PowerPI.mdwn b/22nm_PowerPI.mdwn
new file mode 100644 (file)
index 0000000..a73ed39
--- /dev/null
+++ b/22nm_PowerPI.mdwn
@@ -0,0 +1,56 @@
+# Specs for 2022 SOC
+
+## Applications
+
+ - We are providing open source drivers for the GPU,
+hopefully completed by Fall 2022.
+ - Given that POWER CPUs do not have GPUs, RaptorCS
+would like the LibreSOC to be able function as a
+discrete GPU in PCIE slave mode for POWER9 CPUs.
+ - Lastly, RaptorCS would like to manufacture single
+board computers.
+
+## Devices
+ - 4 Core POWER CPU
+ - SimpleV Capability and GPU Instructions
+ - IOMMU
+ - Coherent Accelerator Processor Proxy (CAPP) functional unit
+ - PCIe host Controller
+ - PCIe Slave controller(RaptorCS wants to use LibreSOC as a GPU on their POWER mobos)
+ - BMC - enables LibreSOC to become a discrete GPU with video output and ethernet.
+ - RGB/TTL framebuffer VGA/LCD PHY from Richard Herveille, RoaLogic.
+
+## Interfaces
+
+### Advanced
+
+ - SERDES - 10rx, 14tx
+   - 4tx, 4rx for [OMI(DDR4](https://openpowerfoundation.org/wp-content/uploads/2018/10/Jeff-Steuchli.OpenCAPI-OPS-OMI.pdf) on top of SERDES with OpenCAPI protocol) @5GHz
+   - 2tx, 2rx for ethernet
+   - 4tx, 4rx for PCIe and other CAPI devices
+   - 3tx for HDMI (note: requires HDMI Trademark Licensing and Compliance Testing)
+ - [OpenFSI](https://openpowerfoundation.org/?resource_lib=field-replaceable-unit-fru-service-interface-fsi-openfsi-specification) instead of JTAG
+   - [Raptor HDL](https://gitlab.raptorengineering.com/raptor-engineering-public/lpc-spi-bridge-fpga)
+   - [Raptor Libsigrok](https://gitlab.raptorengineering.com/raptor-engineering-public/dsview/-/tree/master/libsigrokdecode4DSL/decoders/fsi)
+ - USB 2.0 - [Luna USB](https://github.com/greatscottgadgets/luna)
+with [USB3300 PHY](https://www.microchip.com/wwwproducts/en/USB3300#datasheet-toggle) (Tested max at 333MB/s with Luna on ECP5)
+
+### Basic
+
+These should be easily doable with LiteX.
+
+* [[shakti/m_class/UART]]
+* [[shakti/m_class/I2C]]
+* [[shakti/m_class/GPIO]]
+* [[shakti/m_class/SPI]]
+* [[shakti/m_class/QSPI]]
+* [[shakti/m_class/LPC]]
+* [[shakti/m_class/EINT]]
+* [[shakti/m_class/RGBTTL]] in conjunction with TI TFP410a or Chrontel converter
+
+## Protocols
+ - IPMT over i2c to talk to the BMC
+   - [Intel Spec Sheet](https://www.intel.com/content/dam/www/public/us/en/documents/product-briefs/second-gen-interface-spec-v2.pdf)
+   - [RaptorCS HDL](https://gitlab.raptorengineering.com/raptor-engineering-public/lpc-spi-bridge-fpga/blob/master/ipmi_bt_slave.v)
+ - Reset Vector is set Flexver address over LPC
+   - [Whitepaper](https://www.raptorengineering.com/TALOS/documentation/flexver_intro.pdf)

diff --git a/45nm_Fall2022.mdwn b/45nm_Fall2022.mdwn
deleted file mode 100644 (file)
index a73ed39..0000000
--- a/45nm_Fall2022.mdwn
+++ /dev/null
@@ -1,56 +0,0 @@
-# Specs for 2022 SOC
-
-## Applications
-
- - We are providing open source drivers for the GPU,
-hopefully completed by Fall 2022.
- - Given that POWER CPUs do not have GPUs, RaptorCS
-would like the LibreSOC to be able function as a
-discrete GPU in PCIE slave mode for POWER9 CPUs.
- - Lastly, RaptorCS would like to manufacture single
-board computers.
-
-## Devices
- - 4 Core POWER CPU
- - SimpleV Capability and GPU Instructions
- - IOMMU
- - Coherent Accelerator Processor Proxy (CAPP) functional unit
- - PCIe host Controller
- - PCIe Slave controller(RaptorCS wants to use LibreSOC as a GPU on their POWER mobos)
- - BMC - enables LibreSOC to become a discrete GPU with video output and ethernet.
- - RGB/TTL framebuffer VGA/LCD PHY from Richard Herveille, RoaLogic.
-
-## Interfaces
-
-### Advanced
-
- - SERDES - 10rx, 14tx
-   - 4tx, 4rx for [OMI(DDR4](https://openpowerfoundation.org/wp-content/uploads/2018/10/Jeff-Steuchli.OpenCAPI-OPS-OMI.pdf) on top of SERDES with OpenCAPI protocol) @5GHz
-   - 2tx, 2rx for ethernet
-   - 4tx, 4rx for PCIe and other CAPI devices
-   - 3tx for HDMI (note: requires HDMI Trademark Licensing and Compliance Testing)
- - [OpenFSI](https://openpowerfoundation.org/?resource_lib=field-replaceable-unit-fru-service-interface-fsi-openfsi-specification) instead of JTAG
-   - [Raptor HDL](https://gitlab.raptorengineering.com/raptor-engineering-public/lpc-spi-bridge-fpga)
-   - [Raptor Libsigrok](https://gitlab.raptorengineering.com/raptor-engineering-public/dsview/-/tree/master/libsigrokdecode4DSL/decoders/fsi)
- - USB 2.0 - [Luna USB](https://github.com/greatscottgadgets/luna)
-with [USB3300 PHY](https://www.microchip.com/wwwproducts/en/USB3300#datasheet-toggle) (Tested max at 333MB/s with Luna on ECP5)
-
-### Basic
-
-These should be easily doable with LiteX.
-
-* [[shakti/m_class/UART]]
-* [[shakti/m_class/I2C]]
-* [[shakti/m_class/GPIO]]
-* [[shakti/m_class/SPI]]
-* [[shakti/m_class/QSPI]]
-* [[shakti/m_class/LPC]]
-* [[shakti/m_class/EINT]]
-* [[shakti/m_class/RGBTTL]] in conjunction with TI TFP410a or Chrontel converter
-
-## Protocols
- - IPMT over i2c to talk to the BMC
-   - [Intel Spec Sheet](https://www.intel.com/content/dam/www/public/us/en/documents/product-briefs/second-gen-interface-spec-v2.pdf)
-   - [RaptorCS HDL](https://gitlab.raptorengineering.com/raptor-engineering-public/lpc-spi-bridge-fpga/blob/master/ipmi_bt_slave.v)
- - Reset Vector is set Flexver address over LPC
-   - [Whitepaper](https://www.raptorengineering.com/TALOS/documentation/flexver_intro.pdf)