* config/arm/tm-arm.h: new macros for distinguishing arm/thumb
* config/mips/tm-mips.h: use ELF specific macro
-Tue Aug 25 13:21:58 1998 Michael Snyder <msnyder@cleaver.cygnus.com>
-
- * ax-gdb.c (gen_var_ref): Allow for typedef types.
- (gen_cast, gen_bitfield_ref, gen_expr, gen_deref): ditto.
-
-Mon Aug 24 18:29:03 1998 Michael Snyder <msnyder@cleaver.cygnus.com>
-
- * tracepoint.c (collect_symbol): Handle register doubles that
- are stored in two registers.
-
-Mon Aug 24 14:39:08 1998 Mark Alexander <marka@cygnus.com>
-
- * sh-stub.c (undoSStep): Improve comment.
- * sparc-tdep.c (sparc_extract_struct_value_address): Simplify to use
- same method on both 32-bit and 64-bit machines.
- * sparcl-tdep.c (sparclite_check_watch_resources): Simulator doesn't
- support hardware breakpoints.
- * config/sparc/tm-sparc.h (CALL_DUMMY): Improve comments.
-
-1998-08-20 Jason Molenda (jsm@bugshack.cygnus.com)
-
- * rdi-share/Makefile.am (INCLUDES): Fix typeo.
- * rdi-share/Makefile.in: Regenerated.
-
-1998-08-19 Jason Molenda (jsm@bugshack.cygnus.com)
-
- * rdi-share/Makefile.am: Use just `INCLUDES' not `libname_INCLUDES'.
- * rdi-share/Makefile.in: Regenerated.
-
-1998-08-19 Keith Seitz <keiths@cygnus.com>
-
- * v850ice.c (v850ice_stop): New function to stop the ICE.
- (v850ice_load) Pass filename to ICE DLL.
- (ice_stepi, ice_nexti, ice_cont): Do not directly call the gdb
- commands -- let the GUI do it so that it can retain control
- of the display.
-
-Wed Aug 19 15:53:52 1998 Anthony Green <green@hoser.cygnus.com>
-
- * i386v4-nat.c: Include sys/reg.h if present.
-
-Wed Aug 19 03:07:53 1998 Richard Henderson <rth@cygnus.com>
-
- * config/alpha/alpha-linux (XDEPFILES): Build ser-tcp.
-
-1998-08-18 Fernando Nasser <fnasser@totem.to.cygnus.com>
-
- * symtab.c (decode_line_1): For minimal symbol, SKIP_PROLOG to
- make sure we stop after the frame pointer is locaded and backtrace
- prints an accurate stack. Complements changes made on Mon Jul 27
- 10:45:56 1998
- (decode_line_2): Replaced the whitespace after ">" in a prompt
- which has been taken away by changes made on Sun Jul 19 02:11:45
- 1998
-
-1998-08-18 Keith Seitz <keiths@cygnus.com>
-
- * stack.c: Define new hook, selected_frame_level_changed_hook, which
- will be called whenever the selected stack level changes.
- (select_frame): Call the selected_frame_level_changed_hook.
-
-Tue Aug 18 18:03:42 1998 Stan Shebs <shebs@andros.cygnus.com>
-
- * remote-rdi.c (arm_rdi_open): Pass serial device name to
- Adp_OpenDevice, and include it in error reports.
-
-1998-08-18 Jason Molenda (jsm@bugshack.cygnus.com)
-
- * configure.in: Add more header files to AC_CHECK_HEADERS.
- * configure: Regenerated.
-
- * command.c: Include wait.h or sys/wait.h if present.
- * inftarg.c: Ditto.
- * core-aout.c: Include ptrace.h or sys/ptrace.h if present, based
- on autoconf test.
- * infptrace.c: Ditto.
-
- * expprint.c: Include ctype.h for isprint prototype.
- * i386aix-nat.c: Include sys/reg.h if autoconf says it is present.
- * i386v-nat.c: Include ptrace.h, sys/ptrace.h, and sys/reg.h if
- present, based on autoconf test.
-
- * utils.c: Include curses.h and term.h if present.
- (puts_debug): Change 'carriage_return' local variable to return_p
- to avoid name clash.
-
- * config/m68k/nm-apollo68b.h: Don't define PTRACE_IN_WRONG_PLACE,
- determine it with autoconf.
- * config/i386/nm-linux.h: Don't define NO_SYS_REG_H, determine it
- with autoconf.
- * config/i386/nm-i386sco.h: Don't define NO_PTRACE_H, determine it
- with autoconf.
- * config/i386/nm-i386v.h: Ditto.
- * config/i386/nm-symmetry.h: Ditto.
- * config/m88k/xm-cxux.h: Ditto.
- * config/m88k/xm-dgux.h: Ditto.
-
- * config/m68k/delta68.mh (NAT_FILE): nm-delta68.h no longer necessary.
- * config/m68k/nm-delta68.h: Removed.
-
-Fri Aug 14 11:14:03 1998 Jeffrey A Law (law@cygnus.com)
-
- * mn10300-tdep.c (set_movm_offsets): Change second argument to
- be the actual args to movm itself. All callers changed. Only set
- fi->fsr.regs[x] if reg X is saved by the movm instruction.
-
-Fri Aug 14 04:18:23 1998 Peter Schauer <pes@regent.e-technik.tu-muenchen.de>
-
- * sol-thread.c (lwp_to_thread): Fix error message for failing
- td_ta_map_lwp2thr call.
- (ps_lgetLDT): Mask off upper bits in GS register when comparing
- with selector.
-
-Wed Aug 12 16:30:01 1998 Frank Ch. Eigler <fche@cygnus.com>
-
- * remote-sim.c (simulator_command): Reset register cache after
- simulator command.
-
-Wed Aug 12 09:00:26 1998 Stu Grossman <grossman@babylon-5.cygnus.com>
-
- * expprint.c (dump_prefix/postfix_expression): Don't try to print type
- expressions.
-
-Tue Aug 11 11:33:25 1998 Stu Grossman <grossman@babylon-5.cygnus.com>
-
- * c-typeprint.c (c_print_type): Don't crash if varstring is null.
- * expprint.c expression.h (dump_expression): Rename to
- dump_prefix_expression.
- * Print out the expression in normal form. Call print_longest
- instead of trying to do it ourselves.
- * (dump_postfix_expression): New function, prints out the expression
- with indentation and better formatting and interpretation.
- * parse.c (parse_exp_1): Put calls to dump expressions under ifdef
- MAINTENANCE_CMDS and expressiondebug variable.
-
-Thu Aug 6 13:20:02 1998 Ron Unrau <runrau@cygnus.com>
-
- * infrun.c (wait_for_inferior): use stop_func_name instead of
- stop_func_start to decide that no debug info exists.
-
-start-sanitize-sky
-Thu Aug 6 13:15:05 1998 Ron Unrau <runrau@cygnus.com>
-
- * txvu-tdep.c: add VU0/1 control registers
- * config/mips/tm-txvu.h: ditto
-
-Tue Aug 4 11:02:50 1998 Ron Unrau <runrau@cygnus.com>
-
- * txvu-tdep.c (txvu_insert_breakpoint): make sure CPU context is
- set to correct VU memory space.
- (txvu_remove_breakpoint): use this instead of txvu_breakpoint_from_pc
- * config/tm-txvu.h: use new track-table address
- Do note define BREAKPOINT_FROM_PC anymore
-
-Fri Jul 31 16:06:05 1998 Ron Unrau <runrau@cygnus.com>
-
- * config/tm-txvu.h: use NUM_CORE_REGS instead of NUM_R5900_REGS
- * mips-tdep.c: use NUM_CORE_REGS
- * txvu-tdep.c: use NUM_CORE_REGS, add function prototypes
- (txvu_insert_breakpoints): use VIF interrupt bit
-
-end-sanitize-sky
-Thu Jul 30 13:53:50 1998 Mark Alexander <marka@cygnus.com>
-
- * mips-tdep.c (mask_address_p): New variable.
- (mips_addr_bits_remove): Test mask_address_p to decide whether
- to mask off the upper 32 bits of addresses.
- (_initialize_mips_tdep): Add command to set mask_address_p.
- (mips_call_dummy_address): New function.
- * config/mips/tm-mips.h (CALL_DUMMY_ADDRESS): Redefine to
- call mips_call_dummy_address.
-
-1998-07-29 Fernando Nasser <fnasser@totem.to.cygnus.com>
-
- * symfile.c (add_symbol_file_command): Test for the from_tty
- parameter and avoid query when not interactive.
-
-start-sanitize-am33
-Wed Jul 29 10:39:29 1998 Jeffrey A Law (law@cygnus.com)
-
- * mn10300-tdep.c (set_movm_offsets): Do nothing for the am33
- registers if we are not in am33 mode.
- (mn10300_frame_chain, mn10300_frame_saved_pc): Similarly.
- (set_machine_hook): Keep track of whether or not we're in am33 mode.
-
-end-sanitize-am33
-Mon Jul 27 16:11:42 1998 Michael Snyder <msnyder@cleaver.cygnus.com>
-
- * tracepoint.c (remote_set_transparent_ranges): new function.
- Send the start and end addresses of all loadable read-only
- sections down to the trace target, so that it can treat them
- as "transparent" (ie. don't care if they were collected or not).
-
-Mon Jul 27 15:38:07 1998 Mark Alexander <marka@cygnus.com>
-
- * mn10300-tdep.c (mn10300_analyze_prologue): Undo previous fix
- for setting frame address in optimized code; made unnecessary
- by compiler fixes.
-
-Mon Jul 27 10:45:56 1998 Martin M. Hunt <hunt@cygnus.com>
-
- * symtab.c (decode_line_1): For minimal symbol, call
- find_pc_sect_line() to make sure the line number gets set
- properly.
- (print_symbol_info): Redeclare function void.
-
-1998-07-27 Jason Molenda (jsm@bugshack.cygnus.com)
-
- * config/d10v/tm-d10v.h (REGISTER_NAMES): sp -> r15. The
- stack pointer et al are synthesized from the SP_REGNUM (etc)
- defines and should not be mentioned in REGISTER_NAMES.
-
-start-sanitize-am33
-Mon Jul 27 08:54:41 1998 Jeffrey A Law (law@cygnus.com)
-
- * mn10300-tdep.c (mn10300_frame_chain): Account for space saved
- by am33 register saves.
- (mn10300_frame_saved_pc): Similarly.
-
-end-sanitize-am33
-Fri Jul 24 14:41:19 1998 Michael Snyder <msnyder@cleaver.cygnus.com>
-
- * tracepoint.c (encode_actions): Treat register names and simple
- variable names as special cases and don't convert them to byte-
- codes: these things can be collected far more efficiently
- without invoking the bytecode interpreter.
-
-Fri Jul 24 13:32:46 1998 Mark Alexander <marka@cygnus.com>
-
- * config/i386/tm-i386.h (STORE_STRUCT_RETURN): Make it
- work on hosts of any endianness.
- * config/i386/tm-i386v.h: Ditto.
-
-Fri Jul 24 07:41:12 1998 Mark Alexander <marka@cygnus.com>
-
- * mn10300-tdep.c (set_movm_offsets): New helper function
- for mn10300_analyze_prologue.
- (mn10300_analyze_prologue): Simplify by factoring out common code.
- Fix bugs in setting frame address for optimized code.
- Use read_memory_nobpt instead of target_read_memory.
-
-Thu Jul 23 17:01:17 1998 Michael Snyder <msnyder@cleaver.cygnus.com>
-
- * tracepoint.c (collect_symbol): handle LOC_ARG case.
-
-Thu Jul 23 15:07:40 1998 Dawn Perchik <dawn@cygnus.com>
-
- * sparc-tdep.c (sparc_init_extra_frame_info): Recognize when we're
- in a function prologue before the SAVE instruction.
- (sparc_frame_saved_pc): Ditto.
- * config/sparc/tm-sparc.h (EXTRA_FRAME_INFO): Add in_prologue flag.
-
-Thu Jul 23 14:58:09 1998 Dawn Perchik <dawn@cygnus.com>
-
- * i386-tdep.c (i386_get_frame_setup): Recognize function
- prologues in code compiled with -fcheck-stack.
-
-Thu Jul 23 14:49:27 1998 Dawn Perchik <dawn@cygnus.com>
-
- * remote-mips.c (remote_mips_insert_hw_breakpoint,
- remote_mips_remove_hw_breakpoint): New functions for hardware
- breakpoints on LSI targets.
- * config/mips/tm-embed.h (target_remove_hw_breakpoint,
- target_insert_hw_breakpoint): Define to call
- remote_mips_insert_hw_breakpoint and remote_mips_remove_hw_breakpoint,
- respectively.
-
-start-sanitize-sky
-Thu Jul 23 13:00:28 1998 Ian Carmichael <iancarm@cygnus.com>
-
- * txvu-tdep.c: (VU0_MEM0_WINDOW_START, VU1_MEM0_WINDOW_START)
- Changed to use addresses in kseg1 range.
-
-end-sanitize-sky
-1998-07-21 Fernando Nasser <fnasser@totem.to.cygnus.com>
-
- * source.c (print_source_lines): Print "No such file or directory"
- just once.
- (directory_command): same as above; resets if user issues dir.
-
-Sun Jul 19 02:11:45 1998 Martin M. Hunt <hunt@cygnus.com>
-
- * symtab.c (decode_line_2): Instead of printing a prompt
- and calling command_line_input() without a prompt, just
- call it with the proper args. This makes the GUI work too.
-
-Fri Jul 17 9:26:50 1998 Ron Unrau <runrau@cygnus.com>
-
- * blockframe.c (find_pc_sect_partial_function): allow for the possi-
- bility of multiple symbols at the same address when finding high.
- * breakpoint.c (resolve_sal_pc): if the function based section lookup
- fails, try getting the section from the minimal symbol table.
- * parse.c (write_exp_msymbol): use symbol_overlayed_address to get
- the LMA of a minimal symbol if unmapped.
- * symtab.c (find_line_symtab): change interface to return symtab
- containing the best linetable found.
- (decode_line_1): use find_line_symtab to set val.symtab. This should
- improve support for source files with multiple symtabs.
-start-sanitize-sky
- * tm-txvu.h: include tm-mips64.h instead of starting from scratch.
-end-sanitize-sky
-
-Wed Jul 15 11:51:33 1998 Keith Seitz <keiths@cygnus.com>
-
- * main.c (main): Fix violations of GNU coding standard.
-
- * breakpoint.c: Export delete_command.
-
- * infcmd.c: Export continue_command, stepi_command, and nexti_command.
-
- * Makefile.in: Add target for v850ice.o.
-
- * configure.tgt: Add cygwin32 dependencies for v850 ice.
-
-Wed Jul 15 10:58:29 1998 Nick Clifton <nickc@cygnus.com>
-
- * tracepoint.c (set_raw_tracepoint): Cope with symbols that do not
- have an associated directory.
-
-Mon Jul 13 15:21:04 1998 Mark Alexander <marka@cygnus.com>
-
- * utils.c (puts_debug): Display non-printable characters in hex
- instead of octal.
-
-Thu Jul 9 16:16:47 1998 Jeffrey A Law (law@cygnus.com)
-
- * mn10300-tdep.c (mn10300_generic_register_names): New variable.
- (set_machine_hook): New function. Copy the appropriate register
- names into reg_names.
- (_initialize_mn10300_tdep): Set up to call set_machine_hook.
- * tm-mn10300 (NUM_REGS): Bump to 32.
- (REGISTER_NAMES): Updated accordingly.
-
-start-sanitize-am33
- * mn10300-tdep.c (am33_register_names): New variable.
- (mn10300_analyze_prologue): Handle regs saved by am33 prologues.
- * tm-mn10300.h (E0_REGNUM): Define.
-end-sanitize-am33
-
-Tue Jul 7 7:40:13 1998 Ron Unrau <runrau@cygnus.com>
-
- * symtab.c (find_pc_sect_psymbol): allow case where textlow is 0
-
-Thu Jul 2 15:57:58 1998 Frank Ch. Eigler <fche@cygnus.com>
-
- * breakpoint.c (resolve_sal_pc): Accept absence of innermost
- Lexical block for breakpoint resolution.
-
-Thu Jul 2 10:22:00 1998 Dawn Perchik <dawn@cygnus.com>
-
- * mdebugread.c (parse_partial_symbols): Go ahead and read the .mdebug
- section, but just don't add a 2nd minimal symbol if this is an .mdebug
- section in an ELF file.
-
-1998-07-01 Jim Blandy <jimb@zwingli.cygnus.com>
-
- * Makefile.in (ax-general.o): Depend on $(defs_h) too.
- (ax_h): Bother to define this.
-
-Mon Jun 29 19:01:18 1998 Jim Wilson <wilson@cygnus.com>
-
- * gnu-regex.c (re_comp): Add cast to char * before gettext calls.
-
-Sun Jun 28 11:35:48 1998 Peter Schauer <pes@regent.e-technik.tu-muenchen.de>
-
- Improve support for SunPro F77.
- * dbxread.c (end_psymtab, process_one_symbol): Handle minimal
- symbols with trailing underscore names.
- * minsyms.c (find_stab_function_addr): Ditto.
- * dbxread.c (process_one_symbol): Ignore N_ALIAS for now.
- * partial-stab.h (case N_ALIAS): Ditto.
- * stabsread.c (read_sun_builtin_type): Handle boolean types.
-
-Fri Jun 26 14:03:01 1998 Keith Seitz <keiths@cygnus.com>
-
- * symtab.h (enum namespace): Add new namespaces FUNCTIONS_NAMESPACE,
- TYPES_NAMESPACE, METHODS_NAMESPACE, and VARIABLES_NAMESPACE used by
- new search_symbols.
- Add prototype for search_symbols and free_search_symbols.
-
- * symtab.c (list_symbols): Rewrite to use new search_symbols.
- (file_matches): New helper function for search_symbols.
- (free_search_symbols): New function which frees data returned from
- search_symbols.
- (print_symbol_info): New helper function which prints info about a
- matched symbol to stdout. Extracted from old list_symbols.
- (print_msymbol_info): New helper function which prints info about
- a matched msymbol to stdout. Extracted from old list_symbols.
- (symtab_symbol_info): Extracted from old list_symbols.
- (variables_info): Use symtab_symbol_info.
- (functions_info): Use symtab_symbol_info.
- (types_info): Use symtab_symbol_info.
- (rbreak_command): Rewrite to use new search_symbols.
-
-Thu Jun 25 22:38:32 1998 Frank Ch. Eigler <fche@cygnus.com>
-
- * mips-tdep.c (mips_push_arguments): Use 128-bit stack frame
- alignment for inferior calls.
-
-Wed Jun 24 23:17:12 1998 Mark Alexander <marka@cygnus.com>
-
- * mn10200-tdep.c (mn10200_analyze_prologue): Fix calculation
- of jsr target address.
-
-Tue Jun 23 19:37:46 1998 Mark Alexander <marka@cygnus.com>
-
- * config/mn10200/tm-mn10200.h (SAVED_PC_AFTER_CALL): Don't
- zero upper byte of address.
-
-Tue Jun 23 17:32:26 1998 Michael Snyder <msnyder@cleaver.cygnus.com>
-
- * rs6000-tdep.c (pop_dummy_frame): use memcpy.
- (push_arguments): use memset.
- (various other places): fix up indentation and long lines.
-
-Tue Jun 23 11:58:35 1998 Jason Molenda (crash@bugshack.cygnus.com)
-
- * configure.in: s/lXext/-lXext/ for Jillian's change.
-
-Tue Jun 23 11:14:04 1998 Michael Snyder <msnyder@cleaver.cygnus.com>
-
- * source.c (find_source_lines): fix indentation.
-
- * config/mips/tm-irix5.h: Modify to work better on irix 6, by
- making FP registers 8 bytes instead of 4.
- REGISTER_BYTES: redefine. REGISTER_BYTE(): redefine.
- REGISTER_VIRTUAL_TYPE: redefine. MIPS_LAST_ARG_REGNUM: redefine.
- * irix5-nat.c (fetch_core_registers): read 8 bytes per FP register.
- * mips-tdep.c (FP_REGISTER_DOUBLE): new macro to distinguish
- targets with 8-byte FP registers (don't use TARGET_MIPS64).
- (STACK_ARGSIZE): new macro, how much space is taken up on the
- stack for each function argument (don't use TARGET_MIPS64).
- (mips_push_arguments): modify logic to work better on Irix 6
- (n32 ABI).
-
-Tue Jun 23 12:29:53 1998 Jillian Ye <jillian@cygnus.com>
-
- * configure.in: Add -lXext to mips_extra_libs
- * configure: Regenerated.
-
-Sun Jun 21 09:31:12 1998 Ron Unrau (runrau@cygnus.com)
-
- * symtab.c (find_line_pc): assumed that a PC of 0 is illegal.
- Changed to pass PC as arg and return 1 if valid (0 otherwise).
- symtab.h: change prototype to match
- symtab.c (find_line_pc_range): use new interface
- breakpoint.c (resolve_sal_pc): ditto
- gdbtk.c (gdb_set_bp): ditto
-
-Wed Jun 17 15:50:00 1998 Ron Unrau (runrau@cygnus.com)
-
- * parse.c (target_map_name_to_register): Check target specific
- aliases *first* so that it can over-ride architectural names
-
-Wed Jun 17 17:13:38 1998 Said Ziouani (saidz@park-street.cygnus.com)
-
- * remote-sds.c (sds_start_remote): Fix printf call.
-
-Tue Jun 16 16:32:08 1998 Mark Alexander <marka@cygnus.com>
-
- * mn10200-tdep.c (mn10200_analyze_prologue): Fix null pointer
- crash when in "start".
-
-Tue Jun 16 14:38:40 1998 Ron Unrau (runrau@cygnus.com)
-
- * dbxread.c: reset function_start_offset after a finishing N_FUN
- is seen.
- * remote-sim.c: allow TARGET_REDEFINE_DEFAULT_OPS to override
- target vectors as needed.
-
-Sun Jun 14 08:46:25 1998 Ron Unrau (runrau@cygnus.com)
-
- * partial-stab.h: 'F' and 'f' type N_FUN psymbols should pass
- CUR_SYMBOL_VALUE as CORE_ADDR instead of long
- * buildsym.[ch]: export pending_blocks list
-
-Sat Jun 13 13:02:32 1998 Dawn Perchik (dawn@cygnus.com)
-
- * remote.c : Fix remote help string to match that of help.exp.
-
-Fri Jun 12 14:22:55 1998 Jason Molenda (crash@bugshack.cygnus.com)
-
- * configure.in (LIBS): Add -lw to the list of libraries if needed.
-
-Thu Jun 11 15:05:10 1998 Jason Molenda (crash@bugshack.cygnus.com)
-
- * btowc.c: Removed.
- * configure.in: Don't see if we need to replace btowc().
- * Makefile.in: Don't include LIBOBJS.
- * configure: Regenerated.
- * gnu-regex.c (regex_compile): Only support i18n [:foo:] if
- we have btowc().
-
-Wed Jun 10 15:39:14 1998 Stu Grossman <grossman@babylon-5.cygnus.com>
-
- * c-exp.y: Fix problems with parsing "'foo.bar'::func". Some languages
- allow symbols with dots.
-
- * gdbtypes.c (check_stub_method): Cosmetic. Use more descriptive
- names for parameters.
-
-start-sanitize-java
- * jv-exp.y: Parser now accepts primitive types.
- * (parse_number): Use correct ifdef for scanf long double support.
- * jv-lang.c (java_array_type): Initial cut at array support.
-
-end-sanitize-java
- * language.c language.h (set_language): Now returns previous language.
-
- * symtab.c (find_methods): Make static. Cosmetic changes, including
- indentation, and adding descriptive comments. Move local variable defs
- into the block they are used in.
- * Don't call check_stub_method any more. Use gdb_mangle_name to
- generate the full method name. find_method doesn't need all the other
- goobldegook that check_stub_method does.
- * (gdb_mangle_name): Use more descriptive names for parameters. Fix
- comment.
-start-sanitize-java
- * (lookup_partial_symbol lookup_block_symbol): Check for java to
- ensure we can find mangled names.
-end-sanitize-java
- * (decode_line_1): Move local variable defs into the block they are
- used in. (Improves code readability.)
-
-Wed Jun 10 18:04:35 1998 Frank Ch. Eigler <fche@cygnus.com>
-
- * gdbtypes.c (get_discrete_bounds): Assign unsigned type flag for
- all-positive enum.
- (create_set_type): Ditto for all-positive set values.
- * values.c (unpack_field_as_long): Check for typedef in struct
- field unpacking.
-
-Wed Jun 10 14:06:05 1998 Jason Molenda (crash@bugshack.cygnus.com)
-
- * configure.in: Add some tests for gnu-regex.c's benefit.
- See if btowc() function is provided in C library.
- * configure, config.in: Regenerated.
- * Makefile.in (CLIBS, CDEPS): Add @LIBOBJS@ to build btowc.c
- if necessary.
- * btowc.c: New file.
-
- * gnu-regex.c: Reorder wchar.h and wctype.h includes for Solaris'
- benefit.
- Drop namespace preserving defines for now.
-
-Wed Jun 10 11:53:42 1998 Jason Molenda (crash@bugshack.cygnus.com)
-
- * gnu-regex.c: Include "gnu-regex.h", not "regex.h".
-
-Wed Jun 10 11:34:07 1998 Jason Molenda (crash@bugshack.cygnus.com)
-
- * gnu-regex.c, gnu-regex.h: Change LGPL license to GPL license
- to stay consistent with the rest of GDB.
-
-Wed Jun 10 11:27:39 1998 Jason Molenda (crash@bugshack.cygnus.com)
-
- * gnu-regex.c, gnu-regex.h: Update to current FSF (glibc) versions.
-
-Wed Jun 10 10:58:18 1998 Michael Snyder <msnyder@cleaver.cygnus.com>
-
- * printcmd.c (disassemble_command): move overlay mapping code
- "up" into find_pc_partial_function.
- * blockframe.c (find_pc_partial_function): adjust start address
- and end address for overlays (mapped vs. unmapped addresses),
- so that all callers of this function may benefit.
- * m32r-tdep.c (m32r_skip_prologue): adjust indentation.
-
-Mon Jun 8 16:08:10 1998 Ron Unrau <runrau@cygnus.com>
-
- * objfiles.c (add_to_objfile_sections): All targets to define
- TARGET_KEEP_SECTION to permit them to retain bfd sections that
- GDB would otherwise have discarded.
-
-Fri Jun 5 13:56:19 1998 Doug Evans <devans@canuck.cygnus.com>
-
- * dbxread.c (read_dbx_symtab): Don't lower texthigh for last psymtab.
-
-Thu Jun 4 18:35:04 1998 Stan Shebs <shebs@andros.cygnus.com>
-
- * remote.c (init_extended_remote_ops): Make extended_remote_ops
- by copying from remote_ops, move it and init_remote_ops to
- usual place at end of file, remove "void" from arg lists.
-
-Thu Jun 4 17:51:06 1998 Mark Alexander <marka@cygnus.com>
-
- * sparc-tdep.c (sparc_fix_call_dummy): Byte-swap the call dummy
- on bi-endian machines.
- (sparc_extract_return_value): Handle values smaller than int on
- machines with little-endian data.
- (sparc_target_architecture_hook): Set bi_endian flag.
-
-Thu Jun 4 12:14:48 1998 Michael Snyder <msnyder@cleaver.cygnus.com>
-
- * printcmd.c (disassemble_command): Fix off-by-one error for
- disassembling functions in unmapped overlay sections.
-
-Thu Jun 4 10:15:03 1998 Elena Zannoni <ezannoni@kwikemart.cygnus.com>
-
- * remote.c: merged.
-
- - Jim Blandy <jimb@zwingli.cygnus.com>
- (print_packet, remote_packet_command): New functions.
- (_initialize_remote): Register the remote-packet command.
- - David Taylor <taylor@texas.cygnus.com>
- (_initialize_remote): remote-compare is now
- compare-sections.
- - Elena Zannoni <ezannoni@kwikemart.cygnus.com>
- (remote_compare_command): added warning, issued in case
- of mismatch only.
-
-Thu Jun 4 08:25:38 1998 Michael Snyder <msnyder@cleaver.cygnus.com>
-
- * remote.c (remote_compare_command): New function, new command.
- Compare object file binary image with corresponding memory on
- remote target. Report differences.
-
-Tue Jun 2 19:05:04 1998 Mark Alexander <marka@cygnus.com>
-
- * sparc-tdep.c (sparc_target_architecture_hook): Set target
- byte order only when it's selectable.
-
-Tue Jun 2 02:01:56 1998 Mark Alexander <marka@cygnus.com>
-
- * sparc-tdep.c (sparc_target_architecture_hook): New function to
- set endianness based on machine type.
- (_initialize_sparc_tdep): Initialize target_architecture_hook.
- (sparc_print_register_hook): Print PSR and FPSR in fancy format
- on 32-bit machines.
- * config/sparc/tm-sparc.h (PRINT_REGISTER_HOOK): Redefine to
- call sparc_print_register_hook instead of using inline code.
- * config/sparc/tm-sp64.h (PRINT_REGISTER_HOOK): Remove.
-
-Thu May 28 17:19:14 1998 Keith Seitz <keiths@cygnus.com>
-
- * main.c (main): Check for NULL from getenv on CYGWIN32.
-
-Thu May 28 09:41:44 1998 Nick Clifton <nickc@cygnus.com>
-
- * monitor.c (monitor_vsprintf): Handle %%. Patch courtesy of
- Felix Lee (flee@cygnus.com)
-
-Thu May 28 00:27:35 1998 Peter Schauer <pes@regent.e-technik.tu-muenchen.de>
-
- * mips-tdep.c (mips_push_dummy_frame): Fix calculation of
- PROC_REG_OFFSET and PROC_FREG_OFFSET.
-
-Mon Apr 27 14:37:49 1998 Andrew Cagney <cagney@b1.cygnus.com>
-
- * config/v850/tm-v850.h (REGISTER_BYTE): FP_REGNUM and
- FP_RAW_REGNUM use the same register location.
-
- * v850-tdep.c (v850_scan_prologue): Use FP_RAW_REGNUM instead of
- FP_REGNUM.
- (v850_frame_chain): Ditto.
-
- * config/v850/tm-v850.h (REGISTER_NAMES): Add "fp".
- (NUM_REGS): Update.
- (FP_REGNUM): Update.
- (FP_RAW_REGNUM): Define.
-
-Wed May 27 14:22:31 1998 Keith Seitz <keiths@cygnus.com>
-
- * main.c (main): Convert the path returned from getenv to a posix
- path on cygwin32 hosts.
-
-Mon May 25 13:31:27 1998 Keith Seitz <keiths@cygnus.com>
-
- * remote.c (remote_open_1): If an error occurs starting the remote,
- pop the target AND return.
-
-Sat May 23 02:23:09 1998 Peter Schauer <pes@regent.e-technik.tu-muenchen.de>
-
- * dwarf2read.c (read_subroutine_type): Set TYPE_FLAG_PROTOTYPED
- on C++ functions.
- * valops.c (value_arg_coerce): Add new argument to indicate whether
- the function has a prototype, handle integer and float promotions
- accordingly.
- (call_function_by_hand): Always call value_arg_coerce, pass down
- prototype information.
-
-Fri May 22 10:56:36 1998 John Metzler <jmetzler@cygnus.com>
-
- * remote.c (_initialize_remote): Typo extended__remote
-
-Thu May 21 13:14:25 1998 John Metzler <jmetzler@cygnus.com>
-
- * gnu-nat.c (init_gnu_ops): Initialization of target ops by assignment.
- (_initialize_gnu_nat): Call new init
- * mac-nat.c (init_child_ops): Ditto.
- (_initialize_mac_nat): Ditto.
- * monitor.c (init_base_monitor_ops): Ditto.
- (_initialize_remote_monitors): Ditto.
- * ppc-bdm.c (init_bdm_ppc_ops): Ditto.
- (_initialize_bdm_ppc): Ditto.
- * remote-adapt.c (init_adapt_ops): Ditto.
- (_initialize_remote_adapt): Ditto.
- * remote-array.c (init_array_ops): Ditto.
- (_initialize_array): Ditto.
- * remote-bug (init_bug_ops): Ditto.
- (_initialize_remote_bug): Ditto.
- * remote-e7000.c (init_e7000_ops): Ditto.
- (_initialize_remote_e7000): Ditto.
- * remote-eb.c (init_eb_ops): Ditto.
- (_initialize_remote_eb): Ditto.
- * remote-es.c (init_es1800_ops): Ditto.
- (init_es1800_child_ops): Ditto.
- (_initialize_es1800): Ditto.
- * remote-hms.c (init_hms_ops): Ditto.
- (_initialize_remote_hms): Ditto.
- * remote-mm.c (init_mm_ops): Ditto.
- (_initialize_remote_mm): Ditto.
- * remote-nindy.c (init_nindy_ops): Ditto.
- (_initialize_nindy): Ditto.
- * remote_nrom.c (init_nrom_ops): Ditto.
- (_initialize_remote_nrom): Ditto.
- * remote-os9k (init_rombug_ops): Ditto.
- (_initialize_remote_os9k): Ditto.
- * remote-rdi.c (init_rdi_ops): Ditto.
- (_initialize_remote_rdi): Ditto.
- * remote-rdp.c (init_remote_rdp_ops): Ditto.
- (_initialize_remote_rdp): Ditto.
- * remote-sds.c (init_sds_ops): Ditto.
- (_initialize_remote_sds): Ditto.
- * remote-sim.c (init_gdbsim_ops): Ditto.
- (_initialize_remote_sim): Ditto.
- * remote-st.c (init_st2000_ops): Ditto.
- (_initialize_remote_st2000): Ditto.
- * remote-udi.c (init_udi_ops): Ditto.
- (_initialize_remote_udi): Ditto.
- * remote-vx.c (init_vx_ops): Ditto.
- (init_vx_run_ops): Ditto.
- (_initialize_vx): Ditto.
- * remote.c (init_remote_ops): Ditto.
- (init_extended_remote_ops): Ditto.
- (_initialize_remote): Ditto.
- * sparcl-tdep.c (init_sparclite_ops): Ditto.
- (_initialize_sparcl_tdep): Ditto.
- * v850ice.c (init_850ice_ops): Ditto.
- (_initialize_v850ice): Ditto.
- * win32-nat.c: (init_child_ops): Ditto.
- (_initialize_inftarg): Ditto.
-
-1998-05-21 Jim Blandy <jimb@zwingli.cygnus.com>
-
- * ax-gdb.c (const_var_ref): Don't handle function names. I don't
- want to implement all the "usual unary conversion" rules for
- constants.
- (gen_usual_unary): Turn "function" values into "pointer to
- function" values, in accordance with ANSI.
- (gen_deref): Don't do the usual unary conversions here. Let the
- caller do it. Note that dereferencing a function pointer yields
- a function designator, which we call an rvalue, not an lvalue.
- (gen_address_of): Handle functions specially.
- (gen_struct_ref): Perform the usual unary conversions before
- calling gen_deref.
- (gen_expr): In case for the prefix '*' operator, call
- gen_usual_unary manually.
-
-Wed May 20 15:29:41 1998 Gavin Koch <gavin@cygnus.com>
-
- * mips/tm-tx39.h (MIPS_DEFAULT_FPU_TYPE): Defined as MIPS_FPU_NONE.
- * mips/tm-tx39l.h: Same.
-
-Wed May 20 10:12:11 1998 John Metzler <jmetzler@cygnus.com>
-
- * m32r-tdep.c: (decode_prologue): Handle frames compiled with -Os.
- Split out as separate function called by skip prologue and scan
- prologue. new formula handles optimization in which the prologue
- is interleaved with the body of the function. Also recognizes new
- variations of prologue encoding. Use of frame pointer is
- essential to debugging, -fno-omit-frame-pointer
- (m32r_skip_prologue): Call decode prologue, ignore line info
- (m32r_scan_prologue): Call decode prologue, ignore line info.
-
-Tue May 19 17:23:54 1998 John Metzler <jmetzler@cygnus.com>
-
- * w89k-rom.c (_initialize_w89k): Call new init function
- (init_w89k_cmds): Convert to dynamic initialization of monitor_ops
- data structure for forward compatability with additions to the
- data structure.
- * dbug-rom.c (_initialize_dbug_rom): ditto
- (init_dbug_cmds): ditto
- * m32r-rom.c (_initialize_m32r_rom): ditto
- (init_m32r_cmds): ditto
-
-Tue May 19 14:54:11 1998 Michael Snyder <msnyder@cleaver.cygnus.com>
-
- * tracepoint.c (memrange_cmp): use const void * args to avoid
- ANSI compiler warnings.
-
-1998-05-19 Jim Blandy <jimb@zwingli.cygnus.com>
-
- * ax-gdb.c (gen_fetch, gen_var_ref, gen_deref, find_field,
- gen_bitfield_ref, gen_expr): Call error, not abort.
- * ax-general.c (read_const, generic_ext, ax_trace_quick,
- ax_label, ax_const_d, ax_reg, ax_print): Same.
-
- * tracepoint.c: Remove the $(...) syntax for memranges.
- (validate_actionline, encode_actions, trace_dump_command): Remove
- clauses for the $(...) syntax.
- (parse_and_eval_memrange): Function deleted.
- (_initialize_tracepoint): Update function description.
-
- * gdbtk.c (struct wrapped_call_objs): Change the `func' member to
- be a Tcl_ObjCmdProc, not an Tcl_CmdProc, since it accepts a vector
- of objects as arguments. Change the object vector to be const,
- since that's what all the users of this structure seem to expect.
- (call_obj_wrapper): Cast clientData properly before storing it in
- the wrapped_args structure.
-
- * ax-gdb.c (_initialize_ax_gdb): Make the "agent" command a
- subcommand of "maintenance", as it should have been from the
- beginning. #include "gdbcmd.h", to get the declaration for
- maintenancelist.
- * Makefile.in: Document that dependency.
-
-Tue May 19 12:00:58 1998 Elena Zannoni <ezannoni@kwikemart.cygnus.com>
-
- * tracepoint.c (get_tracepoint_by_number): new function, to access
- traceframe_number for use of the GUI.
-
- * tracepoint.h: added prototype for get_traceframe_number.
-
-Mon May 18 13:34:27 1998 Keith Seitz <keiths@cygnus.com>
-
- * dbxread.c (process_one_symbol): If block addresses are relative to
- function start addresses, reset function_start_address whenever a new
- source file is seen.
-
-Mon May 18 13:04:27 1998 Michael Snyder <msnyder@cleaver.cygnus.com>
-
- * tracepoint.c (get_tracepoint_by_number): make sure to advance
- arg pointer even if we fail to parse a useful number. Otherwise,
- since this function is called in a loop, it may loop forever!
- Also change strtol call to allow arbitrary radix.
- (map_args_over_tracepoints (and other places)): add QUIT; call
- to loop, to allow breakout using control-C. Not all loops were
- analyzed to make sure they could terminate cleanly, but even
- terminating with a messed-up tracepoint list would be better
- than not terminating at all!
- (tdump_command): check to see if we're connected to a trace-
- capable target (currently only "remote") before doing anything
- else.
-
-Sat May 16 22:21:48 1998 Frank Ch. Eigler <fche@cygnus.com>
-
- * config/d30v/tm-d30v.h (INIT_FRAME_PC_FIRST): Fill in PC into
- frame struct before extracting saved register offsets.
-
-Fri May 15 22:47:45 1998 Michael Snyder <msnyder@cleaver.cygnus.com>
-
- * tracepoint.c (encode_actions): fix typo in printf format string.
-
-1998-05-15 Jim Blandy <jimb@zwingli.cygnus.com>
-
- Implement a few more tracing operators: ^ | & ~ !
- * ax-gdb.c (gen_integral_promotions, gen_logical_not,
- gen_complement): New functions.
- (gen_binop): New argument MAY_CARRY, indicating whether we need to
- correct the upper bits of the value after performing the
- operation. Callers changed.
- (gen_expr): Handle BINOP_BITWISE_AND, BINOP_BITWISE_IOR, and
- BINOP_BITWISE_XOR here as well, by calling gen_binop. Handle
- UNOP_LOGICAL_NOT, UNOP_COMPLEMENT.
-
- * ax-gdb.c (gen_conversion): Reworked to avoid some unnecessary
- sign extension.
-
- * ax-gdb.c (gen_usual_arithmetic): Renamed from gen_usual_binary,
- to match the ANSI C standard better. Callers changed.
-
- * ax-gdb.c (gen_traced_pop): Add prototyped declaration.
-
-Fri May 15 18:18:38 1998 David Taylor <taylor@texas.cygnus.com>
-
- * tracepoint.c (stringify_collections_list): return a collection
- of strings rather than a single string.
- (free_actions_list): new function.
- (encode_actions): process collection of strings returned by
- stringify_collections_list.
-
-1998-05-15 Jim Blandy <jimb@zwingli.cygnus.com>
-
- * ax-gdb.c (gen_traced_pop): New function.
- (gen_expr): Call it for comma operator.
- (gen_trace_for_expr): Call it, instead of writing it out.
-
- Add facilities for sending arbitrary packets to the remote agent.
- There are a bunch of improvements to make (make it generic; handle
- 'O' replies properly), but I just want to get this onto the branch.
- * remote.c (print_packet, remote_packet_command): New functions.
- (_initialize_remote): Register the remote-packet command.
-
-Thu May 14 17:52:31 1998 Elena Zannoni <ezannoni@kwikemart.cygnus.com>
-
- * tracepoint.c: move actionline_type definition to tracepoint.h.
- (validate_actionline): make non static.
-
- * tracepoint.h: move actioline_type definition from tracepoint.c.
- (validate_actionline) moved prototype from tracepoint.c.
-
-Thu May 14 11:49:18 1998 David Taylor <taylor@texas.cygnus.com>
-
- * tracepoint.c (validate_actionline): add additional error
- checking, remove some dead code.
- (encode_actions): additional cleanups.
- (trace_find_command): remove some dead code.
- (trace_find_pc_command): ditto.
- (trace_find_tracepoint_command): ditto.
- (trace_find_line_command): ditto.
- (trace_find_range_command): ditto.
- (trace_find_outside_command): ditto.
-
-Thu May 14 5:51:00 1998 Ron Unrau <runrau@cygnus.com>
-
- * symtab.c (decode_line_1): set section for "break *<addr>"
-
-Wed May 13 20:58:02 1998 Mark Alexander <marka@cygnus.com>
-
- * corefile.c (reopen_exec_file): Reopen the exec file if
- it has changed.
-
-Wed May 13 15:22:02 1998 Mark Alexander <marka@cygnus.com>
-
- * sparc-tdep.c (fetch_instruction): New function.
- (single_step, sparc_init_extra_frame_info, examine_prologue):
- Use fetch_instruction instead of read_memory_integer
- to ensure that instructions are always read as big-endian.
-
-Wed May 13 14:42:21 1998 Ian Lance Taylor <ian@cygnus.com>
-
- * configure.in: Add AC_FUNC_ALLOCA.
- * defs.h: Check HAVE_ALLOCA_H rather than sparc. Add _AIX pragma
- alloca.
- * configure: Rebuild.
-start-sanitize-java
- * Makefile.in (jv-lang.o, jv-typeprint.o, jv-valprint.o): New
- targets.
-end-sanitize-java
-
-Wed May 13 11:19:08 1998 Michael Snyder <msnyder@cleaver.cygnus.com>
-
- * tracepoint.c (trace_command): Remove old diagnostic code that was
- preventing tracepoints from being defined with a full-path filename.
-
-Tue May 12 13:17:35 1998 Frank Ch. Eigler <fche@cygnus.com>
-
- * stabsread.c (read_one_struct_field): Check for typedef in type
- tree before clearing bitfield information.
-
-1998-05-11 Jim Blandy <jimb@zwingli.cygnus.com>
-
- * ax-gdb.c (gen_binop): New function, based on gen_mul, to replace
- gen_mul and gen_div, and handle `%' op as well. Correctly tests
- type of arguments.
- (gen_expr): Factor out common code in binary arithmetic operators.
- Add support for `%'.
- (gen_mul, gen_div): Removed.
-
-Thu May 7 14:49:38 1998 Bob Manson <manson@charmed.cygnus.com>
-
- * config/sparc/tm-sp64.h (CALL_DUMMY): Store and retrieve
- %o0-%o5 as 64-bit values; compensate for stack bias.
- (USE_STRUCT_CONVENTION): We only pass pointers to structs
- if they're larger than 32 bytes.
- (REG_STRUCT_HAS_ADDR): Ditto.
-
- * sparc-tdep.c (sparc_init_extra_frame_info): Use read_sp()
- instead of read_register. If the target is a sparc64 and the frame
- pointer is odd, compensate for the stack bias.
- (get_saved_register): Use read_sp().
- (DUMMY_STACK_REG_BUF_SIZE): Use FP_REGISTER_BYTES.
- (sparc_push_dummy_frame): Use read_sp()/write_sp(). On sparc64,
- save the PC, NPC, CCR, FSR, FPRS, Y and ASI registers.
- (sparc_frame_find_saved_regs): Use read_sp(). Read the PC, NPC,
- CCR, FSR, FPRS, Y and ASI registers from the frame, if it's a
- dummy frame.
- (sparc_pop_frame): Use write_sp(). If the target is a sparc64 and
- the FP is odd, compensate for stack bias.
- (sparc_store_return_value): Right-justify the return value before
- writing it to %o0.
- (sparc_fix_call_dummy): Don't NOP out part of the call dummy on
- sparc64.
- (sparc64_read_sp, sparc64_read_fp, sparc64_write_sp,
- sparc64_write_fp, sp64_push_arguments,
- sparc64_extract_return_value): New functions to support the
- sparc64 ABI.
-
- * dwarfread.c (handle_producer): Set processing_gcc_compilation to
- the right version number.
-
- * dwarf2read.c (read_file_scope): Assume we're processing
- GCC2 output.
-
-Wed May 6 16:34:03 1998 Jeffrey A Law (law@cygnus.com)
-
- * somsolib.c: Include gdb_stat.h.
-
-Mon May 4 18:34:01 1998 David Taylor <taylor@texas.cygnus.com>
-
- * ax-gdb.c (gen_mul): new function; (gen_div): new function;
- (gen_expr): add support for * and / operators, call gen_mul and
- gen_div as appropriate.
-
-Mon May 4 16:24:22 1998 Mark Alexander <marka@cygnus.com>
-
- * defs.h (make_run_cleanup): Declare.
- * solib.c (find_solib): Pass correct number of arguments to
- make_run_cleanup.
-
-Mon May 4 07:08:25 1998 Michael Snyder <msnyder@cleaver.cygnus.com>
-
- * tracepoint.c (trace_actions_command): actions command must set
- step_count to zero (in case previous actions have set it but the
- new set does not).
-
-Sat May 2 09:35:07 1998 Stu Grossman <grossman@babylon-5.cygnus.com>
-
- * ocd.h: Add new flags, function codes, and processor types to support
- new Wiggler capabilities.
- * (ocd_write_bytes_size): New function to allow atomic writes of
- memory in sizes larger than a byte.
-
- * ser-unix.c (baudtab): Add 57600, 115200, 230400, and 460800 baud.
-
-Fri May 1 19:51:32 1998 Frank Ch. Eigler <fche@cygnus.com>
-
- * stabsread.c (read_one_struct_field): Do not override supplied
- bitfield size for a range type value.
-
- * gdbtypes.c (create_range_type): For a range with positive
- lower limit, declare range type as unsigned.
-
-Fri May 1 10:58:34 1998 John Metzler <jmetzler@cygnus.com>
-
- * monitor.c: Turn off debug
-
-Fri May 1 09:29:56 1998 Peter Schauer <pes@regent.e-technik.tu-muenchen.de>
-
- * breakpoint.c (delete_command): Skip internal breakpoints when
- all breakpoints are requested.
-
- * stabsread.c (define_symbol): Record parameter types from Sunpro
- function stabs in the TYPE_FIELDS of the function type.
-
-Thu Apr 30 15:59:54 1998 Jason Molenda (crash@bugshack.cygnus.com)
-
- * Makefile.in (config-check-targets, config-check-hosts): Removed.
-
-1998-04-30 Paul Eggert <eggert@twinsun.com>
-
- * Makefile.in (maintainer-clean):
- Don't get ahead of yourself and delete Makefile
- before running `make'.
- (local-maintainer-clean, do-maintainer-clean): New rules.
-
-Wed Apr 29 14:02:59 1998 David Taylor <taylor@texas.cygnus.com>
-
- * ax-gdb.c (gen_add): when adding a pointer and an int, use
- the size of the pointer, not the int (typo) to decide how
- to extend the result.
-
-Wed Apr 29 10:20:40 1998 John Metzler <jmetzler@cygnus.com>
-start-sanitize-vr4111
-
- * nec4102rom.c: New file implements ROM monitor adapter for
- nec-vr4102 board. This board hosts the vr4111 chip. This file
- required extensions to the monitor_ops structure, hooks for wait
- filter, new flags. This version does not support more than one
- breakpoint and resuming after a breakpoint in 16 bit mode is
- completely disfunctional.
-end-sanitize-vr4111
-
- * monitor.h: Defined additional hooks for dmpregs, configure_hooks
- and wait_filter. These additions require that all ROM monitor
- interfaces be recoded to initialize monitor ops using assignments
- rather than static structure initialization. Added new bits to
- flags MO_EXACT_DUMPADDR, MO_HAS_BLOCKWRITES.
-
- * monitor.c (RDEBUG): Conditional tracing throughout the file.
- (fromhex): Now recognized upper cse hex digits
- (monitor_printf_noecho):
- (monitor_readchar): Tracing interferes with input timing.
- (monitor_open): Register different memory write functions with
- dcache_init if MO_HAS_BLOCKWRITES.
- (flush_monior_dcache): Added as an additional utilty.
- (monitor-resume): Call continue hook if one has been supplied.
- (monitor_wait_filter): New function Factored out of monitor wait
- and used if alternate wait-filter has not been provided.
- (monitor_wait): call alternate wait filter if provided. Call
- monitor_dump_regs, a new function factored out from inline code.
- (monitor_dump_block): A new function used as a utility when
- monitors must dump several blocks of registers using different
- commands.
- (monitor_dump_regs): Call alternate function if provided. Uses new
- hook in monitor.h.
- (monitor_write_memory): Engage previouly added hook
- MO_FILL_USES_ADDR.
- (monitor_write_even_block): new function supports writing long
- blocks of 4byte words.
- (longlongendswap): new internal function
- (monitor_write_memory_longlongs): new function writes large blocks
- using command to enter a long long.
- (monitor_write-memory_block): new Function figures out which block
- mod to use.
- (monitor_read_memory): Can now handle dump formats in which the bytes
- preceeding the requested data is not printed.
-
-Tue Apr 28 19:41:33 1998 Tom Tromey <tromey@cygnus.com>
-
- * Makefile.in (GDBTKLIBS): New macro.
- (INSTALLED_LIBS): Include GDBTKLIBS.
- (CLIBS): Likewise.
- * configure: Rebuilt.
- * configure.in: Put Tcl/Tk libs into GDBTKLIBS, not LIBS.
- (GDBTKLIBS): AC_SUBST.
-
- * tracepoint.c (memrange_cmp): Another typo fix; `memrbnge' ->
- `memrange'.
-
- * tracepoint.c (memrange_cmp): Fixed typo in function intro.
-
-Tue Apr 28 17:41:20 1998 Philippe De Muyter <phdm@macqel.be>
-
- * symfile.c (overlay_auto_command): Add forgotten parameter definitions.
- (overlay_manual_command, overlay_off_command): Likewise.
- (overlay_load_command): Likewise.
- * tracepoint.c (memrange_cmp): Parameters have type void *, not
- struct memrange *.
-
-Tue Apr 28 11:08:25 1998 John Metzler <jmetzler@cygnus.com>
-
- * rom68k-rom.c (_initialize_rom68k): Fix unresolved init_rom_68kcmds.
-
-Mon Apr 27 14:32:21 1998 Mark Alexander <marka@cygnus.com>
-
- * config/sparc/tm-sparc.h (CALL_DUMMY): Shorten it drastically,
- make it work on the simulator.
- (FIX_CALL_DUMMY): Convert to function call instead of inline code.
- (sparc_fix_call_dummy): Declare.
- * sparc-tdep.c (sparc_fix_call_dummy): New function, taken from
- old FIX_CALL_DUMMY macro, with additional fixes for simulator.
- (sparc_push_dummy_frame): Set registers differently on simulator
- to prevent corrupted register window save areas.
-
-Mon Apr 27 13:46:40 1998 John Metzler <jmetzler@cygnus.com>
-
- * rom68k-rom.c (_initialize_rom68k, init_rom68k_cmds):
- Convert all static initializations of monitor ops structures to
- executable initializations in order that additions to the data
- structure definition can me made without repeating this editing
- exercise.
- * abug-rom.c (_initialize_abug_rom, init_abug-cmds): Ditto.
- * cpu32bug-rom.c (_initialize_cpu32bug_rom, init_cpu32bug_cmds): Ditto.
- * mon960-rom.c (initialize_mon960, init_mon960_cmds): Ditto.
- * op50-rom.c (initialize_op50n, init_op50n_cmds): Ditto.
- * ppcbug-rom.c (_initialize_ppcbug_rom, init_ppc_cmds): Ditto.
- * sh3-rom.c (_initialize_sh3_rom, init_sh3_cmds): Ditto.
- * sparclet-rom.c (_initialize_sparclet, init_sparclet_cmds): Ditto.
- * remote-est.c (_initialize_est, init_est_cmds): Ditto.
- * remote-hms.c ( _initialize_remote_hms, init_hms_cmds): Ditto.
-
-Mon Apr 27 10:43:04 1998 Jason Molenda (crash@bugshack.cygnus.com)
-
- * gdb_string.h (strdup): Don't specify arguments in prototype.
-
-Sun Apr 26 07:57:21 1998 Peter Schauer <pes@regent.e-technik.tu-muenchen.de>
-
- * rs6000-nat.c (vmap_ldinfo): Issue warning instead of error if
- fstat on ldinfo_fd fails. Use objfile->obfd instead of vp->bfd
- to check for reference to the same file.
-
- * target.c (target_read_string): Handle string transfers at the
- end of a memory section gracefully.
-
-Fri Apr 24 17:18:56 1998 Geoffrey Noer <noer@cygnus.com>
-
- * Makefile.in: enable EXEEXT setting
-
-Fri Apr 24 11:53:49 1998 David Taylor <taylor@texas.cygnus.com>
-
- * tracepoint.c (add_local_symbols): change type of type from
- char to int so that type shows up as 'A' or 'L' not 0.
-
-start-sanitize-r5900
-Fri Apr 24 11:25:07 1998 Jeffrey A Law (law@cygnus.com)
-
- * mips-tdep.c (mips32_decode_reg_save): Handle 128bit wide
- GPR loads/stores generated on the r5900.
- (mips_find_saved_regs, mips32_skip_prologue): Likewise.
- * mips/tm-r5900.h (R5900_128BIT_GPR_HACK): Define.
- * mips/tm-txvu.h (R5900_128BIT_GPR_HACK): Likewise.
-
-end-sanitize-r5900
-Thu Apr 23 16:37:20 1998 Jason Molenda (crash@bugshack.cygnus.com)
-
- * README: Minor changes for 4.17 release.
-
-start-sanitize-java
-Thu Apr 23 15:44:39 1998 Per Bothner <bothner@cygnus.com>
-
- * symfile.c (deduce_language_from_filename): .class implies java.
-
-end-sanitize-java
-Thu Apr 23 12:52:21 1998 Philippe De Muyter <phdm@macqel.be>
-
- * configure.in (strerror): Check if function must be declared.
- * acconfig.h (NEED_DECLARATION_STRERROR): New define slot.
- * gdb_string.h (strerror): Function declaration issued if
- NEED_DECLARATION_STRERROR.
- * configure, config.in : Files regenerated.
-
-Thu Apr 23 12:27:43 1998 Philippe De Muyter <phdm@macqel.be>
-
- * symfile.c (simple_overlay_update_1): Do not prefix array address
- by `&'.
- * bcache.h (BCACHE_DATA_ALIGNMENT): Ditto.
- * tracepoint.c (encode_actions): Ditto.
- * language.c, complaints.c, utils.c (varargs.h): Do not include that
- file here, it is already included indirectly by defs.h.
- * dbxread.c (dbx_symfile_init, process_one_symbol): Cast xmalloc return
- value to the appropriate pointer type.
- * utils.c (floatformat_from_doublest): Ditto.
- * tracepoint.c (read_actions, _initialize_tracepoint): Ditto.
- (add_memrange): Likewise with xrealloc return value.
- * stabsread.c (ref_add): Ditto.
- * coffread.c (coff_symfile_init): Likewise for xmmalloc return value.
- * elfread.c (elf_symfile_read): Ditto.
- * os9kread.c (os9k_symfile_init): Ditto.
-
-Thu Apr 23 00:32:08 1998 Tom Tromey <tromey@cygnus.com>
-
- * config.in: Rebuilt.
- * acconfig.h (ENABLE_NLS, HAVE_CATGETS, HAVE_STPCPY, HAVE_GETTEXT,
- HAVE_LC_MESSAGES): Define.
-
-Wed Apr 22 15:38:56 1998 Tom Tromey <tromey@cygnus.com>
-
- * configure: Rebuilt.
- * configure.in: Call CY_GNU_GETTEXT.
- * Makefile.in (top_builddir): New macro.
- (INTL): Define to @INTLLIBS@.
- (INTL_DEPS): New macro.
- (CDEPS): Reference INTL_DEPS, not INTL.
-
-start-sanitize-sky
-Wed Apr 22 13:40:16 1998 Doug Evans <devans@canuck.cygnus.com>
-
- * txvu-tdep.c (txvu_print_insn): Fix thinko.
-
-end-sanitize-sky
-Wed Apr 22 12:58:23 1998 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
-
- Handle missing shared libraries during the examination of a core
- dump gracefully.
- * solib.c (find_solib): Use catch_errors around call to
- solib_map_sections. Use warning instead of error if reading of
- the shared library name fails.
- (solib_map_sections): Change return and argument types to make
- it callable from catch_errors.
- (symbol_add_stub): Avoid GDB core dump if solib->abfd is NULL.
- * irix5-nat.c, osfsolib.c (xfer_link_map_member, solib_map_sections,
- symbol_add_stub): Ditto.
-
-Wed Apr 22 14:34:49 1998 Michael Meissner <meissner@cygnus.com>
-
- * Makefile.in (INTL*): Add support to link in the intl library,
- and to add -I options to its source and object directories.
- (INTERNAL_CFLAGS): Ditto.
- (C{LIBS,DEPS}): Ditto.
-
-start-sanitize-sky
-Wed Tue 21 17:29:48 1998 Jim Lemke <jlemke@cygnus.com>
- * configure.in: Add configure option --with-sim-funit.
-
-end-sanitize-sky
-Tue Apr 21 11:20:54 1998 Frank Ch. Eigler <fche@cygnus.com>
-
- * mips-tdep.c (gdb_print_insn_mips): Disassemble MIPS instructions
- with subtarget-specific `mach', rather than fixed default.
- * config/mips/tm-mips.h (TM_PRINT_INSN_MACH): New macro, default
- disassembly `mach'.
-start-sanitize-r5900
- * config/mips/tm-r5900.h (TM_PRINT_INSN_MACH): Override.
-end-sanitize-r5900
-start-sanitize-sky
- * config/mips/tm-txvu.h (TM_PRINT_INSN_MACH): Override.
-end-sanitize-sky
-
-Mon Apr 20 15:35:03 1998 Philippe De Muyter <phdm@macqel.be>
-
- * coffread.c (decode_base_type): Treat a long field with size greater
- than TARGET_LONG_BIT as long long.
- * values.c (value_from_longest): Print code value in error message.
-
-Mon Apr 20 15:32:21 1998 Mark Kettenis <kettenis@phys.uva.nl>
-
- * gdb/gdb_string.h (strdup): Declare only if not defined as a
- macro.
-
-Mon Apr 20 14:18:45 1998 J. Kean Johnston <jkj@sco.com>
-
- * procfs.c: Added replacement macros for LWP stuff. Fixed support
- for UnixWare / SVR4.2MP targets and any targets which use
- multi-file /proc entries. Fixed support for hardware watchpoints.
- * solib.c: SCO needs some of the same code as SunOS. Change
- preprocessor conditionals.
-
- * config/i386/i386sco5.mt: New file.
- * config/i386/tm-i386sco5.h: New file.
- * config/i386/i386sco5.mh (NATDEPFILES): add i386v-nat.o.
- * config/i386/nm-i386v42mp.h
- (TARGET_HAS_HARDWARE_WATCHPOINTS): define.
- Add other macros for hardware assisted watchpoints.
- * config/i386/nm-i386sco5.h: Correct attributions.
- (TARGET_HAS_HARDWARE_WATCHPOINTS): define.
- * config/i386/nm-linux.h (target_remote_watchpoint): Pass
- 'type' through to i386_insert_watchpoint.
-
-Mon Apr 20 14:12:30 1998 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
-
- * infrun.c (wait_for_inferior): Don't add signalled processes
- as new threads.
- * procfs.c (wait_fd): Note if LWP has exited.
- (procfs_wait): use GETPID to get process ID.
-
-Sat Apr 18 15:21:04 1998 Stan Cox <scox@cygnus.com>
-
- * configure.tgt: Added sparc86x support.
-
-Thu Apr 16 13:13:24 1998 Jason Molenda (crash@bugshack.cygnus.com)
-
- * rdi-share/etherdrv.c (EthernetWrite): Use strerror to get
- error string if in an ANSI C-ish environment.
-
-Wed Apr 15 18:59:48 1998 Mark Alexander <marka@cygnus.com>
-
- * sparc-tdep.c (SPARC_HAS_FPU): Define.
- (sparc_extract_return_value): New function, required to handle
- machines without floating point.
- (sparc_store_return_value): Ditto.
- * config/sparc/tm-sparc.h (EXTRACT_RETURN_VALUE): Call
- sparc_extract_return_value instead of using inline code.
- (sparc_extract_return_value): Declare.
- (STORE_RETURN_VALUE): Call sparc_store_return_value instead
- of using inline code.
- (sparc_store_return_value): Declare.
-
-Wed Apr 15 12:19:42 1998 Martin M. Hunt <hunt@cygnus.com>
-
- * solib.c (enable_break): Only call warning once
- instead of three times.
-
-Tue Apr 14 16:52:59 1998 Mark Alexander <marka@cygnus.com>
-
- * sparc-tdep.c (sparc_extract_struct_value_address): Make it
- work correctly on little-endian hosts.
- (sparc_push_arguments): New function.
- (gdb_print_insn_sparc): New function.
- (_initialize_sparc_tdep): Make gdb_print_insn_sparc the default
- disassembler, so that SPARClite-specific instructions will
- be recognized.
- * sparcl-tdep.c (readchar): Print debugging information.
- (debug_serial_write): New function, a replacement for SERIAL_WRITE
- that prints debugging information.
- * config/sparc/tm-sparc.h (PUSH_ARGUMENTS): Define.
- (sparc_push_arguments): Declare.
-
-Tue Apr 14 15:43:49 1998 John Metzler <jmetzler@cygnus.com>
-
- * gdbcfgxref (xref_menu): Call new regex and wild card searches
- Now you can type in a specific triple like mips64-vr4300-elf or
- somthing like mips*.h
- (triple_search) wildcardsearch): The new functions
-
-start-sanitize-vr4320
- * configure.tgt: Switch over to use tm-4320.h. Since I switched to
- MIPS EABI the fixes are no longer backward compatible with 4300.
- * tm-vr4320.h: Added
- * vr4320.mt: Added
-
-end-sanitize-vr4320
-Mon Apr 13 16:28:07 1998 Elena Zannoni <ezannoni@kwikemart.cygnus.com>
-
- * utils.c: (warning) added call to warning_hook
-
- * source.c: (find_source_lines) modified to call warning in case
- of source vs. executable time stamp mismatch. Simplified object
- file check. Initialized mtime to 0.
-
- * defs.h: added warning_hook prototype
-
- * top.c: added warning_hook prototype.
-
-Mon Apr 13 09:54:08 1998 Keith Seitz <keiths@andros.cygnus.com>
-
- * config/sparc/tm-sun4os4.h (IS_STATIC_TRANSFORM_NAME): Add missing
- definition.
-
-Fri Apr 10 22:36:28 1998 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
-
- Update support for x86 Solaris 2.
- * config/i386/tm-i386sol2.h, nm-i386sol2.h: New configuration
- files for x86 Solaris 2.
- * config/i386/i386sol2.mt, i386sol2.mh: Use them.
- * config/sparc/tm-sun4sol2.h (PROCFS_GET_CARRY): New macro, extract
- carry flag from a given regset.
- (IS_STATIC_TRANSFORM_NAME): New macro, check if a symbol name
- is a SunPro transformed name.
- * i386-tdep.c (sunpro_static_transform_name): New function to
- extract the source name from a SunPro transformed name.
- * inferior.h (procfs_first_available, procfs_get_pid_fd):
- Add prototypes.
- * infrun.c (wait_for_inferior): Handle breakpoint hit in
- signal handler without intervening stop in sigtramp.
- * procfs.c (procfs_lwp_creation_handler): Use PROCFS_GET_CARRY
- instead of direct access to the status register.
- (procfs_get_pid_fd): New function, returns procfs fd for a given pid.
- * sol-thread.c (ps_lgetLDT): New function, returns LDT for a given
- lwpid.
- (sol_find_new_threads): Handle failed libthread_db initialization
- gracefully.
- * stabsread.c (define_symbol): Use IS_STATIC_TRANSFORM_NAME
- to check for a SunPro transformed symbol name.
-
-Fri Apr 10 10:35:35 1998 John Metzler <jmetzler@cygnus.com>
-
- * utils.c (fmthex): A formatting function for hexdumps
-
- * mips-tdep.c (unpack_mips16): Fixed instruction decoding, lots of
- bit pattern interpretations. mips_fetch_instruction does not work
- for 16 bit instructions. Some confusion remains about sign
- extension in backward branches.
- (mips32_relative_offset): Sign extension
- (mips32_next_pc): Major debugging, bit pattern interpretation
- (print_unpack): debugging printf
- (fetch_mips_16): new funtion, key on PC low bit, not symbol table
- (mips16_next_16): Initial major debugging of this function. Lots
- of bit pattern mistakes.
- (mips_next_pc): key on low bit of PC, not symbol table.
- * symfile.c(generic_load) : Added a download verification which
- reads back the loade code. Download chunk size is now a defined
- macro. Fixed a bug in which downloading slips into loading one
- byte at a time. Lower level functions in monitor.c can load long
- sequences of bytes and make use of these fixups. Referencing
- bfd-start_address directly was incorrectly getting zero for start.
-
-Thu Apr 9 19:20:32 1998 Ian Lance Taylor <ian@cygnus.com>
-
- * mips-tdep.c (do_fp_register_row): Use alloca rather than arrays
- with dynamic size.
-
-Wed Apr 8 19:21:42 1998 Jason Molenda (crash@bugshack.cygnus.com)
-
- * top.c (print_gdb_version): Print 1998 now.
-
-Wed Apr 8 16:57:22 1998 Philippe De Muyter <phdm@macqel.be>
-
- * source.c: Remove obsolete decl of strstr().
-
-Wed Apr 8 16:47:33 1998 Jason Molenda (crash@bugshack.cygnus.com)
-
- * solib.c (solib_create_inferior_hook): Remove Ulrich Drepper's
- patch of March 23 1998.
- * breakpoint.c (breakpoint_re_set_one): Remove Ulrich Drepper's
- patch of March 23 1998.
-
-Sat Apr 4 10:05:00 1998 Dawn Perchik <dawn@cygnus.com>
-
- * mdebugread.c (parse_partial_symbols): If this is an .mdebug
- section in an ELF file, override a symbol's ECOFF section with its
- ELF section. Also, fix stabs continuation where a stabs string
- continues for more than one continuation.
-
-Mon Apr 6 09:17:48 1998 Andrew Cagney <cagney@b1.cygnus.com>
-
- * mips-tdep.c (mips_push_arguments): Specify dimention of valbuf
- using MAX_REGISTER_RAW_SIZE.
-
-Sat Apr 4 10:05:00 1998 Dawn Perchik <dawn@cygnus.com>
-
- * infrun.c: Fix prototype of signals_info to match static funtion.
-
-Thu Apr 2 12:47:41 1998 Frank Ch. Eigler <fche@cygnus.com>
-
- * sol-thread.c (sol_thread_store_registers): Save & restore new
- value of single updated register to prevent accidental clobbering.
-
-Wed Apr 1 22:01:09 1998 Mark Alexander <marka@cygnus.com>
-
- * config/sparc/tm-sparclite.h (TARGET_BYTE_ORDER_SELECTABLE): Define.
- * config/sparc/sparclite.mt: Link in the erc32 simulator.
-
-Wed Apr 1 16:30:49 1998 Ian Dall <Ian.Dall@dsto.defence.gov.au>
-
- * ns32k-tdep.c (flip_bytes, ns32k_localcount,
- ns32k_get_enter_addr, sign_extend): Restore functions mysteriously
- deleted.
-
- * ns32knbsd-nat.c: New (?) file to support fetching and storing
- registers on NetBSD hosts.
-
- * nbsd.mh (NATDEPFILES): put ns32knbsd-nat.o instead of
- ns32k-nat.o
-
- * ns32km3-nat.c (reg_offset): Get order of floating point
- registers correct. Add extra 32382 register offsets.
- (REG_ADDRESS): define to point at correct part of thread
- state. Use calls to "warning" instead of "message".
-
- * tm-nbsd.h, tm-ns32km3.h (REGISTER_NAMES, NUM_REGS,
- REGISTER_BYTES, REGISTER_BYTE): redefine allowing for 32382
- fpu registers.
-
-Wed Apr 1 13:43:07 1998 Philippe De Muyter <phdm@macqel.be>
-
- * NEWS: m68k-motorola-sysv host support added.
- * coffread.c (coff_start_symtab): Accept the filename as an argument,
- set it here. Callers updated.
-
-Wed Apr 1 23:13:23 1998 Andrew Cagney <cagney@b1.cygnus.com>
-
- * config/mips/tm-mips.h (REGISTER_VIRTUAL_TYPE): Handle 32 bit SR,
- FSR and FIR registers.
- (REGISTER_VIRTUAL_SIZE): Compute using REGISTER_VIRTUAL_TYPE.
- (REGISTER_RAW_SIZE): Define using REGISTER_VIRTUAL_SIZE.
-
- * config/mips/tm-mips64.h: Ditto.
-
-Tue Mar 31 21:30:39 1998 Nick Clifton <nickc@cygnus.com>
-
- * arm-tdep.c (gdb_print_insn_arm): Attach a fake Thumb symbol
- vector to the info structure when disassembling thumb
- instructions.
-
- * coffread.c (coff_symtab_read, read_one_sym,
- process_coff_symbol): Support Thumb symbol types.
-
- * dbxread.c (process_one_symbol): Call SMASH_TEXT_ADDRESS (if it
- is defined) for function symbols.
-
-Mon Feb 16 14:05:54 1998 Andrew Cagney <cagney@b1.cygnus.com>
-
- * d10v-tdep.c (d10v_extract_return_value): Wierd. GCC wants to
- return odd sized register quantities with only half of the first
- register used!
-
- * config/d10v/tm-d10v.h (USE_STRUCT_CONVENTION): Use stack when
- size > 8.
-
-Tue Mar 31 16:39:28 1998 Michael Snyder <msnyder@cleaver.cygnus.com>
-
- * tracepoint.c (get_tracepoint_by_number): change warning to note.
- (delete_trace_command): suppress y/n query if no tracepoints, or
- if not from_tty. (trace_pass_command): reject junk at end of args.
- (read_actions): an action list consisting only of "end" is discarded.
- (validate_actionline (for collect command)): an argument beginning
- with a dollar_sign but not recognized as a special argument is
- parsed like any other expression -- if it isn't a register name,
- it's rejected. Also reject an empty argument to while-stepping.
- (trace_find_command): reject a negative frame number argument.
- (_initialize_tracepoint): set $traceframe initially to -1.
-
-Mon Mar 30 16:42:12 1998 Jason Molenda (crash@bugshack.cygnus.com)
-
- * rdi-share/Makefile.am, rdi-share/aclocal.m4,
- rdi-share/configure: New files.
- * rdi-share/configure.in: Rewritten to be an autoconf input file.
- * rdi-share/Makefile.in, rdi-share/configure: Generated by
- automake/autoconf.
- * rdi-share/dbg_hif.h, etherdrv.c, hostchan.c: Use autoconf tests
- to check environment.
-
-Sun Mar 29 15:17:16 1998 Keith Seitz <keiths@onions.cygnus.com>
-
- * tracepoint.c (trace_start_command): Set trace_running_p.
- (trace_stop_command): Clear trace_running_p.
-
-Sat Mar 28 15:19:48 1998 Stan Shebs <shebs@andros.cygnus.com>
-
- * NEWS: Update for 4.17 release.
-
-Fri Mar 27 10:15:50 1998 David Taylor <taylor@tito.cygnus.com>
-
- * tracepoint.c (parse_and_eval_memrange): Fix memory leaks.
- (encode_actions): Use the new gen_trace_for_expr function
- instead of expr_to_address_and_size; collect registers when
- using expressions. (clear_collection_list): Fix memory leak.
-
-1998-03-26 Jim Blandy <jimb@zwingli.cygnus.com>
-
- * ax-gdb.h (gen_trace_for_expr): Add prototype.
-
-Thu Mar 26 17:24:23 1998 David Taylor <taylor@texas.cygnus.com>
-
- * tracepoint.c (validate_actionline): Fix memory leak.
- (encode_actions): Fix memory leak.
-
-Thu Mar 26 16:16:55 1998 David Taylor <taylor@tito.cygnus.com>
-
- * tracepoint.c (trace_mention): New function.
- (trace_command): Call it.
-
-1998-03-26 Jim Blandy <jimb@zwingli.cygnus.com>
-
- * ax-general.c (ax_reqs): New function.
- * ax.h (enum agent_flaws, struct agent_reqs): New types.
- (agent_reqs): New extern prototype. Well, actually, this was
- there before, due to a premature checkin.
- (struct aop_map): Add new `data_size' member.
- * ax-general.c (aop_map): Supply its value.
- * ax-gdb.c (agent_command): Call ax_reqs, for testing.
-
- * ax-general.c (ax_print): If we encounter an invalid or
- incomplete opcode, don't abort; just print an error message.
-
- * ax-gdb.c: Generate trace bytecodes, as appropriate.
- (trace_kludge): New variable.
- (gen_fetch, gen_bitfield_ref): Emit trace bytecodes, if asked
- nicely.
- (expr_to_agent): Ask for no trace bytecodes.
- (gen_trace_for_expr): New function.
- (agent_command): Call it, and display the result appropriately ---
- no struct axs_value, so no type or kind information.
-
- * ax-gdb.c: Use TARGET_CHAR_BIT throughout, not HOST_CHAR_BIT.
-
-Thu Mar 26 22:29:28 1998 Elena Zannoni <ezannoni@kwikemart.cygnus.com>
-
- * tracepoint.c (trace_status_command): Recognize a boolean return
- value from the stub to indicate whether trace experiment is
- running. Export this value as a global state variable.
- (trace_running_p) for use by the GUI. (from Michael Snyder)
- (trace_pass_command) added call to modify_tracepoint_hook.
-
- * tracepoint.h export trace_running_p.
-
-Thu Mar 26 13:08:01 1998 David Taylor <taylor@texas.cygnus.com>
-
- * tracepoint.c (validate_actionline): do not error out if
- exp->elts[0].opcode is not on short line -- let
- expr_to_address_and_size handle it.
-
-1998-03-26 Jim Blandy <jimb@zwingli.cygnus.com>
-
- * tracepoint.c: Include "ax.h", not "agentexpr.h".
-
- * tracepoint.c (encode_actions): Call expr_to_address_and_size,
- not simply expr_to_agent.
-
- * ax-general.c: Comment out code in progress, so everyone else can
- at least compile.
-
- * gdbtypes.c: Doc fix.
-
- * ax.h, ax-gdb.h, ax-general.c, ax-gdb.c: New files.
- * Makefile.in (REMOTE_OBJS): Add ax-general.o and ax-gdb.o.
- (SFILES): Add ax-general.c, ax-gdb.c.
- (ax_h): New variable.
- (ax-general.o, ax-gdb.o): New rules.
-
-start-sanitize-sky
-Wed Mar 25 11:45:19 1998 Frank Ch. Eigler <fche@cygnus.com>
-
- * configure.in (sim-gpu2): Added target type checking to make
- --with-sim-gpu2 option only valid for sky target.
- * configure: Regenerated.
-end-sanitize-sky
-
-Tue Mar 24 16:22:40 1998 Stu Grossman <grossman@bhuna.cygnus.co.uk>
-
- * Makefile.in: Derive SHELL from configure.
- * config/d10v/d10v.mt config/m32r/m32r.mt
- config/mn10200/mn10200.mt config/mn10300/mn10300.mt
- config/d30v/d30v.mt : Remove -lm from SIM. This prevents
- dependency checking of -lm (under NT native builds). (It is
- automatically added by configure if it exists.)
- * doc/configure mswin/configure nlm/configure
- testsuite/gdb.base/configure testsuite/gdb.c++/configure
- testsuite/gdb.chill/configure testsuite/gdb.disasm/configure
- testsuite/gdb.stabs/configure testsuite/gdb.threads/configure:
- Regenerate with autoconf 2.12.1 to fix shell issues for NT native
- builds.
-
-Mon Mar 23 18:10:57 1998 Ulrich Drepper (drepper@cygnus.com)
-
- * solib.c (solib_create_inferior_hook): Rewrite previous
- change to check the type of file via BFD.
-
-Mon Mar 23 13:52:28 1998 Ulrich Drepper (drepper@cygnus.com)
-
- * breakpoint.c (breakpoint_re_set_one): Treat bp_shlib_events
- like bp_breakpoints.
- * solib.c (solib_create_inferior_hook): Relocate section addresses
- if the alleged start address doesn't agree with the PC.
-
-start-sanitize-sky
-Mon Mar 23 13:07:22 1998 Frank Ch. Eigler <fche@cygnus.com>
-
- * configure.in (sim-gpu2): Added --with-sim-gpu2 as configure
- option, to allow gdb+sim linking with sky GPU2 library.
- * configure: Regenerated.
-
-end-sanitize-sky
-Sat Mar 21 19:34:49 1998 Elena Zannoni <ezannoni@kwikemart.cygnus.com>
-
- merged changes from Foundry (list follows by file/author):
-
- - Tom Tromey <tromey@cygnus.com>
- * Makefile.in (gdbres.o): New target.
- (WINDRES): New define.
- * configure: Rebuilt.
- * configure.in (WINDRES): Define.
- (CONFIG_OBS): Include gdbres.o on Windows.
- * gdbtool.ico: New file.
- * gdb.rc: New file.
-
- * ser-unix.c
- - Keith Seitz <keiths@onions.cygnus.com>
- (wait_for): Don't reset the timeout_remaining for CYGWIN32,
- since we now effectively poll the serial port.
- Don't reset the current_timeout, either, since this member is used
- by hardwire_readchar to track the timeout and call the ui_loop_hook.
- (hardwire_readchar): Poll the serial port for Cygwin32. We timeout
- every second, update the UI, and loop around doing this until we
- have hit the real timeout or we get data or an error. This will
- allow the UI to stay active while gdb is "blocked" talking to the
- target.
- - Martin M. Hunt <hunt@cygnus.com>
- (wait_for): Do reset current_timeout because it is only used to
- keep track of what the current timeout for the scb is.
-
- * top.c
- - Martin M. Hunt <hunt@cygnus.com>
- (quit_confirm): Change exit message again
- for GUI.
- (pc_changed_hook): Add prototype.
- - Tom Tromey <tromey@cygnus.com>
- (quit_confirm): Added missing `else'.
- (quit_confirm): Special-case message if init_ui_hook is
- set.
-
- * symtab.c
- - Martin M. Hunt <hunt@cygnus.com>
- (find_pc_sect_line): If no symbol information
- is found, return correct pc anyway.
- (find_methods): Comment out an apparently
- bogus error message because it messes up Foundry.
-
- * serial.c
- - Martin M. Hunt <hunt@cygnus.com>
- (_initialize_serial): Add a description of
- "set remotelogbase".
-
- * findvar.c
- - Martin M. Hunt <hunt@cygnus.com>
- (write_register_gen): Add call to
- pc_changed_hook if the PC is being changed.
-
- * defs.h
- - Martin M. Hunt <hunt@cygnus.com>
- (pc_changed_hook): Define.
-
- * command.c
- - Martin M. Hunt <hunt@cygnus.com>
- (do_setshow_command): If no arguments are supplied,
- don't dump core, instead print out an error message.
-
- * breakpoint.c
- - Martin M. Hunt <hunt@cygnus.com>
- Make set_raw_breakpoint, set_breakpoint_count,
- and breakpoint_count non-static so they are accessible from
- gdbtk.c.
- (enable_breakpoint): Enable breakpoint
- with same disposition instead of changing all breakpoints
- to donttouch.
-
- * annotate.h
- - Keith Seitz <keiths@onions.cygnus.com>
- Add declarations for annotation hooks.
-
- * annotate.c
- - Keith Seitz <keiths@onions.cygnus.com>
- Add hooks: annotate_starting_hook, annotate_stopped_hook,
- annotate_signalled_hook, annotate_exited_hook.
- (annotate_starting): If hook exists, call it instead.
- (annotate_stopped): If hook exists, call it instead.
- (annotate_exited): If hook exists, call it instead.
- (annotate_signalled): If hook exists, call it instead.
-
-Fri Mar 20 14:45:36 1998 Michael Snyder <msnyder@cleaver.cygnus.com>
-
- * gdbserver/Makefile.in: add dependency on XM_CLIBS.
- * gdbserver/low-sim.c (registers) force into alignment.
- (create_inferior): Fix typo on new_argv; add abfd arg to
- sim_open, sim_create_inferior. Add reg_size arg to
- sim_fetch_register, sim_store_register. Make simulator
- take a single-step to get into a known running state.
- * gdbserver/gdbreplay.c: include fcntl.h for def'n of F_SETFL.
- * gdbserver/server.c: Add remote_debug variable to control
- debug output.
- * gdbserver/server.h: Add prototypes for enable/disable_async_io.
- * gdbserver/remote-utils.c: add verbose debugging output controlled
- by "remote_debug" variable. Add call to "disable_async_io()"
- to avoid being killed by async SIGIO signals.
- * config/m32r/m32r.mt: define GDBSERVER_(LIBS and DEPFILES),
- so that gdbserver can be built with the m32r simulator.
-
-Fri Mar 20 09:04:06 1998 Andrew Cagney <cagney@b1.cygnus.com>
-
-start-sanitize-r5900
- * config/mips/tm-r5900.h (REGISTER_VIRTUAL_SIZE): Redefine as
- expression from REGISTER_VIRTUAL_TYPE.
- (REGISTER_RAW_SIZE): Ditto.
- (REGISTER_VIRTUAL_TYPE): Redefine, use explicit size for 32 bit
- registers.
-
-end-sanitize-r5900
- * gdbtypes.h (builtin_type_{,u}int{8,16,32,64}): New gdb builtin
- types.
-start-sanitize-r5900
- (builtin_type_{,u}int128): Ditto.
-end-sanitize-r5900
-
- * gdbtypes.c (_initialize_gdbtypes): Initialize new types.
-
- * mips-tdep.c (do_gp_register_row): Pad register value when GP
- register is smaller than MIPS_REGSIZE.
-
- * findvar.c (value_of_register): When raw and virtual register
- values identical, check that sizes are consistent.
-
-Thu Mar 19 11:32:15 1998 Michael Snyder (msnyder@cleaver.cygnus.com)
-
- * minsyms.c (compare_minimal_symbols): If addresses are identical,
- then compare on names. Sorted list should have symbols with
- identical addresses AND names adjacent, so dups can be discarded.
-
-Wed Mar 18 12:50:17 1998 Jeff Law (law@cygnus.com)
-
- * stabsread.c (define_symbol): Don't look for ',' as a LRS
- indicator.
-
-Wed Mar 18 10:34:51 1998 Nick Clifton <nickc@cygnus.com>
-
- * rdi-share/etherdrv.c: Set sys_errlist[] as char * not const char *.
-
-Fri Mar 13 15:43:53 1998 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
-
- * config/mips/xm-mips.h (CC_HAS_LONG_LONG): Undefine for Ultrix
- when compiling with native cc, the compiler has broken long long
- support.
-
-Fri Mar 13 15:37:02 1998 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
-
- * config/m68k/xm-sun3os4.h: Remove malloc declarations, they
- are handled via autoconf now.
- * remote.c (remote_ops, extended_remote_ops): Replace static
- forward declaration by moving the static definition to the top of
- the file, for old K&R compilers.
- * tracepoint.c (collect_symbol, trace_start_command):
- Replace ANSI string concatenation with K&R compatible simple string.
-
-1998-03-11 Fred Fish <fnf@ninemoons.com>
-
- * source.c (select_source_symtab): Don't reach error if we have
- a current_source_symtab from reading in partial symbol table.
-
-start-sanitize-vr4320
-Tue Mar 10 16:15:13 1998 Gavin Koch <gavin@cygnus.com>
-
- * configure.tgt (mips64*vr4320*el-*-elf*) : Removed spurious case.
-
-end-sanitize-vr4320
-Fri Mar 6 13:10:27 1998 Fred Fish <fnf@cygnus.com>
-
- * utils.c (quit): Call SERIAL_DRAIN_OUTPUT rather than
- SERIAL_FLUSH_OUTPUT.
- * serial.h (struct serial_ops): Add drain_output, pointer to
- function that waits for output to drain.
- (SERIAL_DRAIN_OUTPUT): Macro to wait for output to drain.
- * ser-unix.c (hardwire_drain_output): New function and prototype.
-
- * ser-unix.c (hardwire_ops): Add entry for drain_output function.
- * ser-tcp.c (tcp_ops): Ditto.
- * ser-ocd.c (ocd_ops): Ditto.
- * ser-mac.c (mac_ops): Ditto.
- * ser-go32.c (dos_ops): Ditto.
- * ser-e7kpc.c (e7000pc_ops): Ditto.
-
-Thu Mar 5 16:07:41 1998 Michael Snyder (msnyder@cleaver.cygnus.com)
-
- * sparcl-tdep.c: fix #endif comments
-
-Thu Mar 5 15:10:35 1998 Jason Molenda (crash@bugshack.cygnus.com)
-
- * Makefile.in (BISON): Configure substitutes in @YACC@, not @BISON@.
-
-Thu Mar 5 14:42:41 1998 Keith Seitz <keiths@onions.cygnus.com>
-
- * ocd.c (ocd_open): If we fail ocd_start_remote, make sure we
- error () so that we abort out of bdm_ppc_open.
-
-Wed Mar 4 16:53:52 1998 Martin M. Hunt <hunt@cygnus.com>
-
- * serial.c (_initialize_serial): Add a description of
- "set remotelogbase".
-
- * command.c (do_setshow_command): If no arguments are supplied,
- don't dump core, instead print out an error message.
-
-Wed Mar 4 16:50:18 1998 Jason Molenda (crash@bugshack.cygnus.com)
-
- * gdbtk.c (gdb_listfiles): Fix thinko in last change.
-
-Wed Mar 4 15:34:49 1998 Jason Molenda (crash@bugshack.cygnus.com)
-
- * gdbtk.c (gdb_listfiles): Allocate space for 'files' dynamically.
-
-Wed Mar 4 01:39:08 1998 Ron Unrau <runrau@cygnus.com>
-
- * elfread.c (elf_symtab_read): merge SYMBOL_IS_SPECIAL into
- MAKE_MSYMBOL_SPECIAL
- * config/mips/tm-mips.h: ditto
-
-Tue Mar 3 17:19:08 1998 John Metzler <jmetzler@cygnus.com>
-
-start-sanitize-vr4111
- * config/mips/tm-vr4xxx.h: implements vr4111 as separate from 4300
- * config/mips/vr4xxx.tm: implements vr4111 as separate from 4300
- * configure.tgt: Recognise mips64vr4111-*-elf as vr4xxx
-end-sanitize-vr4111
- * dwarfread.c (read_tag_pointer_type): Pointer sizes now come from
- TARGET_PTR_BIT rather from sizeof(char *) on host.
-
-Tue Mar 3 14:37:02 1998 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
-
- * alpha-nat.c (fetch_osf_core_registers): Renamed from
- fetch_aout_core_registers.
- (alpha_osf_core_fns): Renamed from alpha_aout_core_fns, change
- flavour to bfd_target_unknown_flavour for OSF core files.
-
-start-sanitize-vr4320
-Tue Mar 3 11:12:39 1998 Gavin Koch <gavin@cygnus.com>
-
- * configure.tgt (mips64*vr4320*el-*-elf*,mips64*vr4320*-*-elf*) :
- Added.
-
-end-sanitize-vr4320
-Mon Mar 2 17:44:13 1998 Michael Snyder (msnyder@cleaver.cygnus.com)
-
- * breakpoint.c (_initialize_breakpoint): Make "en" an alias
- for "enable" (so that it doesn't conflict with "end").
-
-Mon Mar 2 17:04:25 1998 Jason Molenda (crash@bugshack.cygnus.com)
-
- * Makefile (VERSION): Bump to 4.17.1.
-
-Mon Mar 2 16:59:15 1998 Jason Molenda (crash@bugshack.cygnus.com)
-
- * rdi-share/etherdrv.c (sys_errlist): Add correct decl for Linux.
-
-Mon Mar 2 16:51:44 1998 Jason Molenda (crash@bugshack.cygnus.com)
-
- * Makefile.in (YYFILES): Remove in maintainer-clean, not distclean.
-
-Mon Mar 2 16:47:11 1998 Philippe De Muyter <phdm@macqel.be>
-
- * Makefile.in (distclean): Add `rm $(YYFILES)'.
-
-Mon Mar 2 16:45:48 1998 Philippe De Muyter <phdm@macqel.be>
-
- * coffread.c (coff_read_enum_type): Set TYPE_FLAG_UNSIGNED if enum
- is unsigned.
-
-Sun Mar 2 15:16:13 1998 Richard Henderson <rth@cygnus.com>
-
- * configure.host, configure.tgt: Add sparc-linux.
- * sparc-nat.c: Include <asm/reg.h> not <machine/reg.h> for Linux.
- * config/sparc/*linux*: New files.
-
-Mon Mar 2 12:12:41 1998 Anthony Thompson (athompso@cambridge.arm.com)
-
- * arm-tdep.c (gdb_print_insn_arm): Call print_insn_big_arm
- if we're big endian; else call print_insn_little_arm.
-
-Mon Feb 24 11:24:57 1998 Richard Henderson <rth@cygnus.com>
-
- * Makefile.in (BISON): Don't even pretend to use yacc.
- (c-exp.tab.o): Use bison -o to use a unique intermediate file.
- (f-exp.tab.o, m2-exp.tab.o): Likewise.
-start-sanitize-java
- (jv-exp.tab.o): Likewise.
-end-sanitize-java
-
-Tue Feb 24 03:32:59 1998 Andrew Cagney <cagney@b1.cygnus.com>
-
- * remote-sim.c (gdbsim_fetch_register): Don't abort when the
- register size is wrong.
-
-start-sanitize-r5900
-Tue Feb 24 02:53:41 1998 And<rew Cagney <cagney@b1.cygnus.com>
-
- * config/mips/tm-r5900.h (REGISTER_VIRTUAL_SIZE,
- REGISTE_RAW_SIZE): Re-define.
-
-end-sanitize-r5900
-Thu Feb 19 16:49:48 1998 John Metzler <jmetzler@cygnus.com>
-
- * target.c (debug_to_fetch_registers,debug_to_store_registers,
- debug-to_insert_breakpoint,debug_to_remove_breakpoint): tracing
- 64 bit targets crashed long long printfs.
-
-Tue Feb 17 16:36:22 1998 Michael Snyder (msnyder@cleaver.cygnus.com)
-
- * symfile.c (read_target_int_array): rename read_target_long_array
- and force the sizeof an ovly_table element to sizeof(long),
- instead of sizeof(int).
-
-Tue Feb 17 18:05:05 1998 Frank Ch. Eigler <fche@cygnus.com>
-
- * remote-mips.c (mips_request): Use unsigned long during parsing
- returned value from monitor, to prevent accidental sign extension.
-
-Tue Feb 17 14:28:33 1998 Peter Schauer <pes@regent.e-technik.tu-muenchen.de>
-
- * acconfig.h: FORCE_MMCHECK changed to MMCHECK_FORCE.
- * configure.in: Ditto.
- * configure: Regenerated.
-
-Tue Feb 17 14:07:34 1998 Peter Schauer <pes@regent.e-technik.tu-muenchen.de>
-
- * gdbtypes.c (check_typedef): Do not try to resolve the length of
- a type which has TYPE_FLAG_TARGET_STUB set, if the target type has
- set TYPE_FLAG_TARGET_STUB as well.
-
-Tue Feb 17 14:32:18 1998 Andrew Cagney <cagney@b1.cygnus.com>
-
- * remote-sim.c (gdbsim_fetch_register, gdbsim_store_register):
- Pass register size to sim_{fetch,store}_register. Check nr of
- register bytes transfered is correct.
-
-Mon Feb 16 14:05:54 1998 Andrew Cagney <cagney@b1.cygnus.com>
-
- * remote-d10v.c (remote_d10v_open): Call push_remote_target
- instead of open_remote_target.
-
- * remote.c (remote_xfer_memory): Use REMOTE_TRANSLATE_XFER_ADDRESS
- to translate addr/size when defined.
- (open_remote_target): Delete.
-
- * target.h (open_remote_target): Delete.
-
- * config/d10v/tm-d10v.h (REMOTE_TRANSLATE_XFER_ADDRESS): Define.
-
-Mon Feb 16 14:05:54 1998 Andrew Cagney <cagney@b1.cygnus.com>
-
- * config/d10v/tm-d10v.h (USE_STRUCT_CONVENTION): Define. True when
- sizeof type > 1.
-
-Mon Feb 16 14:05:54 1998 Andrew Cagney <cagney@b1.cygnus.com>
-
- * config/d10v/tm-d10v.h (USE_STRUCT_CONVENTION): Define. True when
- sizeof type > 1.
-
-Sun Feb 15 16:10:50 1998 Ron Unrau <runrau@cygnus.com>
-
- * parse.c (write_dollar_variable): call new function
- target_map_name_to_register to allow targets to define their own
- register name aliases.
- * infcmd.c (registers_info): use target_map_name_to_register so that
- "print $reg" and "info reg $reg" use the same register name aliases.
-
-Fri Feb 13 16:40:30 1998 Stan Shebs <shebs@andros.cygnus.com>
-
- * config/i386/i386mk.mt (OBJFORMATS): Delete, no longer used.
- * config/i386/xm-i386mk.h: Fix an include.
- * config/pyr/tm-pyr.h (PC_INNER_THAN): Remove, never used.
-
-Thu Feb 12 16:12:07 1998 Frank Ch. Eigler <fche@cygnus.com>
-
- * remote-mips.c (mips_enter_debug): Sleep before sending CR to
- monitor.
- (mips_exit_debug): Accept any whitespace / verbiage before monitor
- prompt reappears.
-
-Thu Feb 12 18:25:42 1998 Andrew Cagney <cagney@b1.cygnus.com>
-
- * d10v-tdep.c (show_regs): Avoid use of %llx when printing 8 byte
- accumulators.
-
-Thu Feb 12 17:10:22 1998 Andrew Cagney <cagney@b1.cygnus.com>
-
- * valops.c (value_at): For d10v, make read pointers with
- read_target_unsigned_integer, keep addresses unsigned.
- (value_fetch_lazy): Ditto.
-
-Thu Feb 12 12:14:02 1998 Andrew Cagney <cagney@b1.cygnus.com>
-
- * remote-d10v.c: New file. Layer the d10v GDB->remote memory map
- on top of the remote serial memory transfer functions.
-
- * config/d10v/d10v.mt (TDEPFILES): Add remote-d10v.o
-
- * Makefile.in (remote-d10v.o): Add dependencies.
-
- * remote.c (remote_open_1): Add arg extended_p, engage extended
- protocol when extended_p.
- (remote_open, extended_remote_open): Pass !extended_p /
- extended_p to remote_open_1.
-
- * remote.c (open_remote_target), target.h: New function.
-
-Wed Feb 11 08:41:15 1998 Andrew Cagney <cagney@b1.cygnus.com>
-
- * config/i386/fbsd.mh (XDEPFILES): Add ser-tcp.o.
-
-Tue Feb 10 17:50:37 1998 Keith Seitz <keiths@onions.cygnus.com>
-
- * tracepoint.c (tracepoint_operation): Call the modify_tracepoint_hook
- if it exists.
- Remove static declaration of free_actions.
-
- * tracepoint.h: Add declaration of free_actions.
-
-Tue Feb 10 12:17:13 1998 Fred Fish <fnf@cygnus.com>
-
- * symtab.c (decode_line_1): Revert change that mistakenly
- removed assignment of sals[0].pc field.
-
-Mon Feb 10 12:37:47 1998 Philippe De Muyter <phdm@macqel.be>
-
- * m68k/tm-delta68.h (EXTRACT_RETURN_VALUE): Type argument for
- `REGISTER_CONVERT_TO_VIRTUAL is `TYPE', not
- `REGISTER_VIRTUAL_TYPE (FP0_REGNUM)';
- (STORE_RETURN_VALUE): Ditto, and offset for `write_register_bytes'
- is `REGISTER_BYTE (FP0_REGNUM)', not `FP0_REGNUM'.
- (FRAME_NUM_ARGS): New macro.
- * m68k/tm-news.h (EXTRACT_RETURN_VALUE, STORE_RETURN_VALUE): Ditto.
- * delta68-nat.c (clear_insn_cache): New function, forgotten in previous
- patch.
-
-Mon Feb 9 11:10:06 1998 Andrew Cagney <cagney@b1.cygnus.com>
-
- * d10v-tdep.c: Replace references to IMEM_ADDR and DMEM_ADDR with
- D10V_MAKE_[DI]ADDR and D10V_CONVERT_[ID]ADDR_TO_RAW macros.
-
- * config/d10v/tm-d10v.h (IMEM_START): Move to 0x01......
- (DMEM_START): Move to 0x00......
- (STACK_START): Move to 0x00..7ffe.
- (D10V_MAKE_IADDR, D10V_MAKE_DADDR): Translate unconditionally.
-
- * d10v-tdep.c (d10v_xlate_addr): Delete function.
-
-Mon Feb 9 15:10:21 1998 Fred Fish <fnf@cygnus.com>
-
- * symtab.c (fixup_psymbol_section): Move forward declaration to
- top of file with other such decls. Make it a static function.
- * symtab.h: Minor formatting tweaks.
-
-Mon Feb 9 13:14:12 1998 Stan Shebs <shebs@andros.cygnus.com>
-
- * config/a29k-udi.mt, config/i960/vxworks960.mt (REMOTE_OBS):
- Remove redefinition.
- * config/i960/tm-i960.h (BREAKPOINT): Define.
-
-Mon Feb 9 15:35:38 1998 Ian Lance Taylor <ian@cygnus.com>
-
- * Makefile.in (init.c): Ignore errors when making init.c. Seems
- necessary to work around bug in Solaris make.
-
-Sun Feb 6 02:44:28 1997 Philippe De Muyter <phdm@macqel.be>
-
- * m68k/tm-delta68.h (CPLUS_MARKER): Macro deleted.
- (EXTRACT_STRUCT_VALUE_ADDRESS): Macro defined.
- (EXTRACT_RETURN_VALUE, STORE_RETURN_VALUE): Macros modified
- because floating-point values return via %fp0.
- (CLEAR_INSN_CACHE): New macro.
- * m68k/tm-m68k.h (REGISTER_CONVERT_TO_VIRTUAL): Macro fixed
- to use DOUBLEST.
- (REGISTER_CONVERT_TO_RAW): Ditto.
- * infptrace.c (child_xfer_memory): If CLEAR_INSN_CACHE is defined,
- call it after having written in child process's memory.
- * inflow.c (PROCESS_GROUP_TYPE): Macro defined if HAVE_TERMIO.
- (gdb_has_a_terminal, terminal_ours_1): Functions fixed for HAVE_TERMIO.
-
-Fri Feb 6 16:17:30 1998 Jeffrey A Law (law@cygnus.com)
-
- * config/mips/tm-mips64.h (TARGET_LONG_BIT): Allow final target to
- override.
- (TARGET_LONG_LONG_BIT): Likewise.
- (TARGET_PTR_BIT): Likewise.
-start-sanitize-r5900
- * config/mips/tm-r5900.h (TARGET_PTR_BIT): Define to 32 bits.
-end-sanitize-r5900
-
-start-sanitize-sky
-Fri Feb 6 14:33:34 1998 Doug Evans <devans@canuck.cygnus.com>
-
- * configure.tgt (mips64r5900*-sky-elf*): Replaces txvu-elf.
- * config/mips/txvu.mt (SIM): txvu -> mips.
-
-end-sanitize-sky
-Fri Feb 6 17:42:22 1998 Andrew Cagney <cagney@b1.cygnus.com>
-
- * config/d10v/tm-d10v.h (D10V_CONVERT_IADDR_TO_RAW,
- D10V_CONVERT_DADDR_TO_RAW): Define.
-
- * d10v-tdep.c (d10v_push_arguments): Re-write. Pass arguments in
- registers, regardless of their size, when they fit.
-
-Thu Feb 5 13:16:36 1998 Andrew Cagney <cagney@b1.cygnus.com>
-
- * d10v-tdep.c (d10v_extract_return_value): For function pointers
- translate address to IMAP area.
-
- * config/d10v/tm-d10v.h (EXTRA_FRAME_INFO): Delete dummy from
- struct.
- (POP_FRAME): Point at generic_pop_current_frame.
-
- * d10v-tdep.c (d10v_pop_frame): Delete code handling dummy frames,
- handled earlier.
- (d10v_push_return_address): New function.
- (d10v_pop_dummy_frame): Delete.
- (d10v_fix_call_dummy): Delete.
- (d10v_call_dummy_address): Delete.
-
- * d10v-tdep.c (d10v_init_extra_frame_info): Clear dummy and
- frameless.
-
- * d10v-tdep.c (d10v_push_arguments): Keep stack word aligned.
-
- * config/d10v/tm-d10v.h (EXTRACT_STRUCT_VALUE_ADDRESS): Extract
- address of structure from first ARG1_REGNUM.
-
- * d10v-tdep.c (d10v_push_arguments): Force 4 byte args into
- even-odd register pair. Store 1 and 2 byte args in registers.
-
- * valops.c (value_fetch_lazy): Ensure that a D10V function pointer
- is fetched in the correct byte order.
- (value_at): Ditto. Also ensure data pointers are mapped to data
- segment.
-
- * config/d10v/tm-d10v.h (D10V_DADDR_P, D10V_IADDR_P):
-
- * d10v-tdep.c: Replace 2 with REGISTER_RAW_SIZE.
- (d10v_pop_frame): Replace R13 with LR_REGNUM.
- (d10v_push_arguments): Replace R2 with ARG1_REGNUM.
- (d10v_push_arguments): Replace 6 with ARGN_REGNUM.
- (d10v_extract_return_value): Access return value with RET1_REGNUM.
-
- * config/d10v/tm-d10v.h (ARG1_REGNUM, ARGN_REGNUM, RET1_REGNUM):
- Define.
- (STORE_RETURN_VALUE): Specify return register using RET1_REGNUM.
- (STORE_STRUCT_RETURN): Specify ARG1_REGNUM as the struct ptr
- location.
-
-Thu Feb 5 13:16:36 1998 Andrew Cagney <cagney@b1.cygnus.com>
-
- * blockframe.c (generic_pop_dummy_frame): Flush the frame, no
- longer valid.
-
- * blockframe.c (generic_pop_current_frame), frames.h: New
- function.
-
-Thu Feb 5 17:18:16 1998 Andrew Cagney <cagney@b1.cygnus.com>
-
- * remote-sim.c (gdbsim_create_inferior): clear_proceed_status
- before /re/starting the simulator.
-
-Thu Feb 5 15:55:31 1998 C. M. Heard (heard@vvnet.com)
-
- * top.c (do_nothing): Remove signal handler after signal is caught.
-
-Thu Feb 5 11:57:06 1998 Michael Snyder (msnyder@cleaver.cygnus.com)
-
- * tracepoint.c (tracepoint_operation): call free_actions instead
- of free. (free_actions): eliminate some memory leaks for actions.
- (validate_actionline): pass string arg by reference, so we can
- change the pointer. Change all memrange collection arguments to
- canonical form (literal address and size), to enforce early
- evaluation. Accept UNOP_MEMVAL (assembly variables) for
- trace collection. (parse_and_eval_memrange): accept expressions
- for the address and size fields of a memrange (and evaluate
- them immediately). (several places): use -1 instead of zero
- to distinguish an absolute memrange from a register-relative one.
- (encode_actions): add handling for UNOP_MEMVAL (assembly variable).
-
-Wed Feb 4 17:40:21 1998 Jason Molenda (crash@bugshack.cygnus.com)
-
- * Makefile.in (SFILES): add tracepoint.c.
- (LINTFILES): add @CONFIG_SRCS@.
- (SOURCES): Ditto.
- * configure.in (CONFIG_SRCS): Mirror use of CONFIG_OBS.
- * configure: Regenerated.
-
-Tue Feb 3 16:12:32 1998 Gordon W. Ross (gwr@mc.com)
-
- * infptrace.c (child_resume): Don't try to step if
- NO_SINGLE_STEP is defined.
-
-Mon Feb 2 19:06:13 1998 Jason Molenda (crash@bugshack.cygnus.com)
-
- * Makefile.in (VERSION): Bump to 4.16.2.
-
-Mon Feb 2 17:18:25 1998 Richard Henderson <rth@cygnus.com>
-
- * alpha-nat.c (fetch_aout_core_registers): Rename from
- fetch_core_registers.
- (fetch_elf_core_registers): New function.
- (supply_gregset): Use ALPHA_REGSET_BASE.
- (supply_fpregset): Likewise.
- (fill_fpregset): Likewise.
- (alpha_aout_core_fns): Rename from alpha_core_fns.
- (alpha_elf_core_fns): New.
- * config/alpha/alpha-linux.mh (NATDEPFILES): solib.o not osfsolib.o.
- Disable MMALLOC.
- * config/alpha/nm-linux.h (SVR4_SHARED_LIBS): Define if ELF.
- (TARGET_ELF64): Likewise.
- (ALPHA_REGSET_BASE): New.
- * config/alpha/nm-osf.h (ALPHA_REGSET_BASE): New.
- * config/alpha/tm-alphalinux.h: Include tm-sysv4.h.
-
- * solib.c (elf_locate_base): Add TARGET_ELF64 support.
- (info_sharedlibary_command): Likewise.
-
- * configure.host: Match alpha*.
- * configure.tgt: Likewise.
-
-Fri Jan 30 15:11:38 1998 David Taylor <taylor@texas.cygnus.com>
-
- Changes by <Peter.Schauer@Regent.E-Technik.TU-Muenchen.DE>
- * infrun.c (IN_SOLIB_DYNSYM_RESOLVE_CODE): new macro for detecting
- whether we are in the dynamic symbol resolution code
- (wait_for_inferior): invoke it.
- * solib.c (in_svr4_dynsym_resolve_code): new function
- (enable_break): record start and end of the dynamic linker
- text and plt sections for use in in_svr4_dynsym_resolve_code.
- * solib.h (IN_SOLIB_DYNSYM_RESOLVE_CODE): add svr4 definition;
- (in_svr4_dynsym_resolve_code): declare it.
- * config/nm-gnu.h (solib.h): move inclusion to after definition
- of SVR4_SHARED_LIBS.
- * config/nm-sysv4.h (solib.h): ditto.
- * config/i386/nm-i386sco5.h (solib.h): ditto.
- * config/i386/nm-linux.h (solib.h): ditto.
- * config/mips/nm-irix5.h (IN_SOLIB_DYNSYM_RESOLVE_CODE): undefine.
-
-Thu Jan 29 19:39:31 1998 Stan Shebs <shebs@andros.cygnus.com>
-
- * coffread.c (coff_symtab_read) [SEM]: Remove code, macro can
- never be defined.
- * dbxread.c (process_one_symbol) [BLOCK_ADDRESS_ABSOLUTE]:
- Remove, no longer needed.
- * hppa-tdep.c (N_SET_MAGIC): Remove, no longer used.
- * config/pa/xm-hppab.h (SEEK_SET, SEEK_CUR, SEEK_END): Ditto.
- * config/mips/tm-mipsm3.h (NUMERIC_REG_NAMES): Ditto.
- * config/mips/mipsm3.mt (TDEPFILES): Remove mipsread.o.
-
-Wed Jan 28 14:46:52 1998 Stan Shebs <shebs@andros.cygnus.com>
-
- Suggested by Chris Walter <walter@budoe.bu.edu>:
- * dwarfread.c (set_cu_language): Recognize Fortran.
- * dwarf2read.c (set_cu_language): Ditto.
- (read_array_type): Fix language test.
-
-Wed Jan 28 12:51:08 1998 Michael Snyder (msnyder@cleaver.cygnus.com)
-
- * blockframe.c (generic_frame_chain_valid): A frame pointer may
- be valid if it is equal to the frame pointer of its caller (ie.
- not necessarily strictly INNER_THAN). Allows frameless functions.
-
-Wed Jan 28 11:23:25 1998 Mark Alexander <marka@cygnus.com>
-
- * monitor.c (monitor_vsprintf): New function to handle
- printing of large addresses using %A format specifier.
- (monitor_printf_noecho, monitor_printf): Use monitor_vsprintf
- instead of vsprintf.
- * dve3900-rom.c (_initialize_r3900_rom): Use %A instead of %Lx
- to print addresses.
-
-Tue Jan 27 16:14:23 1998 Jason Molenda (crash@bugshack.cygnus.com)
-
- * configure.in (CONFIG_LDFLAGS): Only add -export-dynamic
- when using GNU ld.
-
-Mon Jan 26 19:07:46 1998 Jason Molenda (crash@bugshack.cygnus.com)
-
- * config/alpha/tm-alphalinux.h (alpha_linux_sigtramp_offset):
- Add closing parenthesis. From HJ Lu.
-
-Mon Jan 26 17:54:45 1998 Mark Alexander <marka@cygnus.com>
-
- * dve3900-rom.c: Improve performance by using memory commands
- that print less fluff. Minor cosmetic changes.
- Eliminate compiler warnings.
-
-Sat Jan 24 23:44:43 1998 Martin M. Hunt <hunt@cygnus.com>
-
- * breakpoint.c (enable_breakpoint): Preserve breakpoint
- disposition when enabling a breakpoint.
-
- * symtab.c (find_pc_sect_line): If no symbol information
- is found, return correct pc anyway.
-
-Fri Jan 23 17:26:22 1998 Stan Shebs <shebs@andros.cygnus.com>
-
- * configure.host (i[3456]86-*-osf1mk*, mips-*-mach3*,
- ns32k-*-mach3*): Fix file names.
- (i[3456]86-*-os9k, m88*-*-mach3*, w65-*-*): Remove config
- recognition, no source files for these.
- * configure.tgt (powerpc-*-aix4*): Remove config, now identical
- to powerpc-*-aix*.
- * config/powerpc/{aix4.mh,aix4.mt,tm-ppc-aix4.h}: Remove files,
- no longer needed.
-
-Fri Jan 23 16:49:41 1998 Mark Alexander <marka@cygnus.com>
-
- * monitor.c (monitor_write, monitor_readchar): New functions.
- * monitor.h (monitor_write, monitor_readchar): Declare.
- * dve3900-rom.c: Add support for fast loading on ethernet connections.
-
-Fri Jan 23 07:47:06 1998 Fred Fish <fnf@cygnus.com>
-
- * config/d10v/tm-d10v.h (CALL_DUMMY): Define as "{ 0 }".
- (TARGET_READ_FP): Define to d10v_read_fp rather than d10v_read_sp.
- (TARGET_WRITE_FP): Define to d10v_write_fp rather than d10v_write_sp.
- (d10v_write_fp, d10v_read_fp): Add prototypes.
- * symtab.c (decode_line_1): Remove assignment of sals[0].pc field.
- * symfile.c (simple_overlay_update, simple_overlay_update_1):
- Ignore the size of overlay sections. This check is redundant anyway.
- * printcmd.c (print_frame_args): Ditto.
- * valops.c (value_fetch_lazy): Ditto.
- * values.c (unpack_long): Ditto.
- * d10v-tdep.c (d10v_frame_chain, d10v_frame_find_saved_regs,
- d10v_init_extra_frame_info): Fix some minor bugs so the finish command
- works properly.
- (show_regs): Change num1 and num2 types from "long long" to "LONGEST".
- (d10v_read_fp, d10v_write_fp): New functions.
- (d10v_push_arguments): Remove unneeded assigns to "val" and "contents".
- (d10v_push_arguments): Fix for pointers and structs.
- (d10v_extract_return_value): Fix for pointers and chars.
-
-Tue Jan 20 18:53:18 1998 Stan Shebs <shebs@andros.cygnus.com>
-
- * configure.tgt (i386-*-mach*, m88*-*-mach3*): Remove config
- recognition, no source files for these (note that the i386 Mach
- config is for pre-Mach 3).
- (mips*-*-mach3*, ns32k-*-mach3*): Fix file names.
- * config/mips/mipsel64.mt: Remove, never referenced.
-
-Mon Jan 19 14:01:28 1998 Stan Shebs <shebs@andros.cygnus.com>
-
- * top.c (print_gdb_version): Restore to original message.
-
-Mon Jan 19 13:34:40 1998 Ian Lance Taylor <ian@cygnus.com>
-
- From cgf@bbc.com (Chris Faylor):
- * win32-nat.c (child_mourn_inferior): Call ContinueDebugEvent to
- let the child exit.
- (child_kill_inferior): Respond to all debug events as the child is
- terminating.
-
- * Makefile.in (all): Change gdb dependency to gdb$(EXEEXT).
- (uninstall): Add $(EXEEXT) to file name to remove.
- (gdb$(EXEEXT)): Rename target from plain gdb.
- (gdb1$(EXEEXT)): Rename target from plain gdb1.
- (clean, mostlyclean): Add $(EXEEXT) to binary names to remove.
-
-1998-01-16 Felix Lee <flee@cygnus.com>
-
- * top.c (print_gdb_version): delete stutter.
-
-Thu Jan 15 12:29:13 1998 Nick Clifton <nickc@cygnus.com>
-
- * remote-rdi.c (arm_rdi_open): Patch from Tony.Thompson@arm.com
- to prevent spurous error messages on non-ICE targets.
-
-Wed Jan 14 19:27:02 1998 Stan Shebs <shebs@andros.cygnus.com>
-
- * config/mips/{r3900.mt,r3900l.mt,tm-r3900.h,tm-r3900l.h}:
- Remove, no longer used.
-
-Wed Jan 14 18:11:26 1998 Michael Meissner <meissner@cygnus.com>
-
- Patch from Jim Wilson.
- * d30v-tdep.c (d30v_frame_find_saved_regs_offsets): Properly
- declare void function before use.
-
- * config/d30v/tm-d30v.h (CALL_DUMMY): Initialize as { 0 }, not {}.
-
-Tue Jan 13 16:38:48 1998 Fred Fish <fnf@cygnus.com>
-
- * configure.in (--with-mmalloc): Add new configure arg to use the
- mmalloc package. Default is to not use it.
- (START_INFERIOR_TRAPS_EXPECTED): Define to the integer 2, not
- the string "2".
- * acconfig.h (USE_MMALLOC, FORCE_MMCHECK): Add #undef.
- * configure: Regenerated.
- * config.in: Regenerated.
- * Makefile.in (MMALLOC_DIR, MMALLOC_SRC): Remove.
- (MMALLOC): Set using configure.
- (MMALLOC_CFLAGS): Set using configure.
-
- * config/i386/tm-linux.h (sys_quotactl): Define to 1 rather
- than just defining it.
- * mpw-make.sed: Undefine USE_MMALLOC rather than defining NO_MMALLOC.
- * utils.c (NO_MMALLOC): Use USE_MMALLOC instead.
- * objfiles.c: ditto.
- * defs.h: ditto.
-
- * config/sparc/sun4os4.mh (MMALLOC_CFLAGS): Remove.
- * config/m68k/sun3os4.mh (MMALLOC_CFLAGS): Remove.
- * config/i386/cygwin32.mh (MMALLOC_CFLAGS): Remove.
- * config/alpha/alpha-osf3.mh (MMALLOC_CFLAGS): Remove.
- * config/alpha/alpha-osf2.mh (MMALLOC_CFLAGS): Remove.
- * gdbserver/Makefile.in (MMALLOC_*): Remove.
- * config/rs6000/rs6000.mh (MMALLOC, MMALLOC_CFLAGS): Remove.
- * config/rs6000/aix4.mh (MMALLOC, MMALLOC_CFLAGS): Remove.
- * config/powerpc/aix4.mh (MMALLOC, MMALLOC_CFLAGS): Remove.
- * config/powerpc/aix.mh (MMALLOC, MMALLOC_CFLAGS): Remove.
- * config/ns32k/ns32km3.mh (MMALLOC, MMALLOC_CFLAGS): Remove.
- * config/mips/mipsm3.mh (MMALLOC, MMALLOC_CFLAGS): Remove.
- * config/mips/decstation.mh (MMALLOC, MMALLOC_CFLAGS): Remove.
- * config/m88k/cxux.mh (MMALLOC, MMALLOC_CFLAGS): Remove.
- * config/i386/xm-windows.h (NO_MMALLOC, NO_MMCHECK): Remove.
- * config/i386/i386mk.mh (MMALLOC, MMALLOC_CFLAGS): Remove.
- * config/i386/i386m3.mh (MMALLOC, MMALLOC_CFLAGS): Remove.
- * config/i386/i386gnu.mh (MMALLOC, MMALLOC_CFLAGS): Remove.
- * config/alpha/alpha-osf1.mh (MMALLOC, MMALLOC_CFLAGS): Remove.
- * config/alpha/alpha-linux.mh (MMALLOC, MMALLOC_CFLAGS): Remove.
-
-Mon Jan 12 11:46:51 1998 Michael Snyder (msnyder@cleaver.cygnus.com)
-
- * config/m68k/tm-m68k.h (REGISTER_VIRTUAL_TYPE): make A0 thru A7
- default to void pointer type (so that their default radix is hex).
-
- * symtab.c: move rbreak_command from no_class to class_breakpoint
- so it will be listed under "help breakpoints".
-
-Sat Jan 10 14:58:04 1998 Stan Shebs <shebs@andros.cygnus.com>
-
- * rdi-share/hostchan.c: Remove gettimeofday declaration.
-
-Thu Jan 8 11:03:59 1998 Nick Clifton <nickc@cygnus.com>
-
- * remote-rdp.c: Applied patches submitted by Tony.Thompson@arm.com
- to implement the Angel remote debugging interface.
-
- * Makefile.in: Add build rules for remote-rdi.c and
- rdi-share/libangsd.a.
-
- * configure.tgt: Updated from source on branch.
- * config/arm/tm-arm.h: Updated from source on branch.
- * arm-tdep.c: Updated from source on branch.
-
- * rdi-share: New directory, RDI library contributed by ARM.
-
-Mon Jan 5 20:21:59 1998 Mark Alexander <marka@cygnus.com>
-
- * monitor.h (MO_PRINT_PROGRAM_OUTPUT): Define.
- * monitor.c (monitor_wait): Echo program output.
- * dve3900-rom.c (_initialize_r3900_rom): Remove MO_HANDLE_NL flag,
- add MO_PRINT_PROGRAM_OUTPUT flag.
-
-Mon Jan 5 18:21:11 1998 David Taylor <taylor@texas.cygnus.com>
-
- * top.h (HAVE_SIGSETJMP): define SIGJMP_BUF, SIGSETJMP, and
- SIGLONGJMP appropriately based on whether HAVE_SIGSETJMP is
- defined.
- * top.c (return_to_top_level, catch_errors): use the new macros
- * main.c (SET_TOP_LEVEL): ditto.
- * config/xm-sysv4.h (HAVE_SIGSETJMP): Define.
-
-Fri Jan 2 18:48:58 1998 Mark Alexander <marka@cygnus.com>
-
- * configure.in: Double up brackets in shell case pattern.
-
-Fri Jan 2 17:06:05 1998 Michael Snyder (msnyder@cleaver.cygnus.com)
-
- * tracepoint.c (finish_tfind_command): improved algorithm for
- deciding when we've "stepped" into a new stack frame.
- (map_args_over_tracepoints): loop over tracepoint list "safely",
- since list elements may be deleted during loop.
- (read_actions): add actions to history list.
-
-For older changes see ChangeLog-97
-\f
-Local Variables:
-mode: change-log
-left-margin: 8
-fill-column: 74
-version-control: never
-End:
Mon Aug 31 15:42:10 1998 Tom Tromey <tromey@cygnus.com>
* top.c (context_hook): Define.
projects / binutils-gdb.git / commitdiff