configs/rockpro64: new defconfig

A defconfig for the rockpro64 was added in
59e1077b4ebe79622a454b0a8a840e4349a0440d, but then removed
in 10f49213b7e2837ae6ed63fc16fbdaa954ecd87f because an ARM32
compiler was needed to build ATF, and this was not supported
back then.

Now, since package/arm-gnu-a-toolchain/ has been added, this
defconfig can be re-introduced.

Following new changes are introduced in comparision with the
older changeset:

    - renamed defconfig from pine64_rockpro64 to rockpro64
    - updated readme
    - using a GPT partition layout
    - update defconfig to build ATF
    - bump u-boot to 2020.07
    - bump linux to 5.8.2

Signed-off-by: Suniel Mahesh <sunil@amarulasolutions.com>
Reviewed-by: Jagan Teki <jagan@amarulasolutions.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
[Arnout: fixate U-Boot version; remove blind BR2_TARGET_UBOOT_NEEDS_PYTHON]

diff --git a/DEVELOPERS b/DEVELOPERS
index 192eab8de96a9714b7ed852b76e5e0a12c8b5c1b..9ea49d8a11e655e51cf98ab6d75eec03a4b51ac5 100644 (file)
--- a/DEVELOPERS
+++ b/DEVELOPERS
@@ -2451,6 +2451,7 @@ F:        package/powertop/
 
 N:     Suniel Mahesh <sunil@amarulasolutions.com>
 F:     board/firefly/
+F:     board/pine64/rockpro64
 F:     board/radxa/rockpi-4
 F:     board/radxa/rockpi-n8
 F:     board/radxa/rockpi-n10
@@ -2458,6 +2459,7 @@ F:        configs/roc_pc_rk3399_defconfig
 F:     configs/rock_pi_4_defconfig
 F:     configs/rock_pi_n8_defconfig
 F:     configs/rock_pi_n10_defconfig
+F:     configs/rockpro64_defconfig
 F:     package/arm-gnu-a-toolchain/
 
 N:     Sven Haardiek <sven.haardiek@iotec-gmbh.de>

diff --git a/board/pine64/rockpro64/extlinux.conf b/board/pine64/rockpro64/extlinux.conf
new file mode 100644 (file)
index 0000000..ea081a1
--- /dev/null
+++ b/board/pine64/rockpro64/extlinux.conf
@@ -0,0 +1,4 @@
+label RK3399_ROCKPRO64 linux
+  kernel /Image
+  devicetree /rk3399-rockpro64.dtb
+  append earlycon=uart8250,mmio32,0xff1a0000 root=/dev/mmcblk0p4 rw rootwait

diff --git a/board/pine64/rockpro64/genimage.cfg b/board/pine64/rockpro64/genimage.cfg
new file mode 100644 (file)
index 0000000..0ba25c0
--- /dev/null
+++ b/board/pine64/rockpro64/genimage.cfg
@@ -0,0 +1,39 @@
+image boot.vfat {
+       vfat {
+               files = {
+                       "Image",
+                       "rk3399-rockpro64.dtb",
+                       "extlinux"
+               }
+       }
+       size = 64M
+}
+
+image sdcard.img {
+
+       hdimage {
+               gpt = true
+       }
+
+       partition loader1 {
+               image = "idbloader.img"
+               offset = 32K
+       }
+
+       partition loader2 {
+               image = "u-boot.itb"
+               offset = 8M
+       }
+
+       partition boot {
+               partition-type = 0xC
+               bootable = "true"
+               image = "boot.vfat"
+               offset = 16M
+       }
+
+       partition rootfs {
+               partition-type = 0x83
+               image = "rootfs.ext4"
+       }
+}

diff --git a/board/pine64/rockpro64/post-build.sh b/board/pine64/rockpro64/post-build.sh
new file mode 100755 (executable)
index 0000000..ba29375
--- /dev/null
+++ b/board/pine64/rockpro64/post-build.sh
@@ -0,0 +1,5 @@
+#!/bin/sh
+
+BOARD_DIR="$(dirname $0)"
+
+install -m 0644 -D $BOARD_DIR/extlinux.conf $BINARIES_DIR/extlinux/extlinux.conf

diff --git a/board/pine64/rockpro64/readme.txt b/board/pine64/rockpro64/readme.txt
new file mode 100644 (file)
index 0000000..de86970
--- /dev/null
+++ b/board/pine64/rockpro64/readme.txt
@@ -0,0 +1,60 @@
+PINE64 ROCKPro64
+================
+https://www.pine64.org/rockpro64/
+
+Build:
+======
+  $ make rockpro64_defconfig
+  $ make
+
+Files created in output directory
+=================================
+
+output/images
+
+├── bl31.elf
+├── boot.vfat
+├── extlinux
+├── idbloader.img
+├── Image
+├── rk3399-rockpro64.dtb
+├── rootfs.ext2
+├── rootfs.ext4 -> rootfs.ext2
+├── rootfs.tar
+├── sdcard.img
+├── u-boot.bin
+└── u-boot.itb
+
+Creating bootable SD card:
+==========================
+
+Simply invoke (as root)
+
+sudo dd if=output/images/sdcard.img of=/dev/sdX && sync
+
+Where X is your SD card device.
+
+Booting:
+========
+RockPro64 has a 40-pin PI-2 GPIO Bus.
+
+Connect a jumper between pin 23 and pin 25 for SD card boot.
+
+Serial console:
+---------------
+The pin layout for serial console on PI-2 GPIO Bus is as follows:
+
+pin 6:  gnd
+pin 8:  tx
+pin 10: rx
+
+Initially connect pin 6 and pin 8(transmit). Apply power to RockPro64, once the
+power is on then connect pin 10(receive).
+
+Baudrate for this board is 1500000.
+
+Login:
+------
+Enter 'root' as login user, and the prompt is ready.
+
+https://wiki.amarulasolutions.com/bsp/rockchip/rk3399/rockpro64.html

diff --git a/configs/rockpro64_defconfig b/configs/rockpro64_defconfig
new file mode 100644 (file)
index 0000000..5086320
--- /dev/null
+++ b/configs/rockpro64_defconfig
@@ -0,0 +1,53 @@
+# Architecture
+BR2_aarch64=y
+BR2_cortex_a72_a53=y
+
+# Linux headers same as kernel, a 5.8 series
+BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_5_8=y
+
+# Firmware
+BR2_TARGET_ARM_TRUSTED_FIRMWARE=y
+BR2_TARGET_ARM_TRUSTED_FIRMWARE_CUSTOM_GIT=y
+BR2_TARGET_ARM_TRUSTED_FIRMWARE_CUSTOM_REPO_URL="https://git.trustedfirmware.org/TF-A/trusted-firmware-a.git"
+BR2_TARGET_ARM_TRUSTED_FIRMWARE_CUSTOM_REPO_VERSION="11a0a46a899fcc3b1fdb214b382f3d7495d88eca"
+BR2_TARGET_ARM_TRUSTED_FIRMWARE_PLATFORM="rk3399"
+BR2_TARGET_ARM_TRUSTED_FIRMWARE_BL31=y
+BR2_TARGET_ARM_TRUSTED_FIRMWARE_NEEDS_ARM32_TOOLCHAIN=y
+BR2_TARGET_ARM_TRUSTED_FIRMWARE_IMAGES=""
+
+# Bootloader
+BR2_TARGET_UBOOT=y
+BR2_TARGET_UBOOT_BUILD_SYSTEM_KCONFIG=y
+BR2_TARGET_UBOOT_CUSTOM_VERSION=y
+BR2_TARGET_UBOOT_CUSTOM_VERSION_VALUE="2020.07"
+BR2_TARGET_UBOOT_BOARD_DEFCONFIG="rockpro64-rk3399"
+BR2_TARGET_UBOOT_NEEDS_DTC=y
+BR2_TARGET_UBOOT_NEEDS_PYTHON3=y
+BR2_TARGET_UBOOT_NEEDS_ATF_BL31=y
+BR2_TARGET_UBOOT_NEEDS_ATF_BL31_ELF=y
+BR2_TARGET_UBOOT_FORMAT_CUSTOM=y
+BR2_TARGET_UBOOT_FORMAT_CUSTOM_NAME="u-boot.itb"
+BR2_TARGET_UBOOT_SPL=y
+BR2_TARGET_UBOOT_SPL_NAME="idbloader.img"
+
+# Kernel
+BR2_LINUX_KERNEL=y
+BR2_LINUX_KERNEL_CUSTOM_VERSION=y
+BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="5.8.2"
+BR2_LINUX_KERNEL_USE_ARCH_DEFAULT_CONFIG=y
+BR2_LINUX_KERNEL_DTS_SUPPORT=y
+BR2_LINUX_KERNEL_INTREE_DTS_NAME="rockchip/rk3399-rockpro64"
+BR2_LINUX_KERNEL_NEEDS_HOST_OPENSSL=y
+
+# Filesystem
+BR2_TARGET_GENERIC_HOSTNAME="rockpro64"
+BR2_TARGET_GENERIC_ISSUE="Welcome to ROCKPRO64"
+BR2_TARGET_ROOTFS_EXT2=y
+BR2_TARGET_ROOTFS_EXT2_4=y
+BR2_PACKAGE_HOST_DOSFSTOOLS=y
+BR2_PACKAGE_HOST_GENIMAGE=y
+BR2_PACKAGE_HOST_MTOOLS=y
+BR2_PACKAGE_HOST_UBOOT_TOOLS=y
+BR2_ROOTFS_POST_IMAGE_SCRIPT="support/scripts/genimage.sh"
+BR2_ROOTFS_POST_SCRIPT_ARGS="-c board/pine64/rockpro64/genimage.cfg"
+BR2_ROOTFS_POST_BUILD_SCRIPT="board/pine64/rockpro64/post-build.sh"