+++ /dev/null
-CONFIG_PPC_85xx=y
-CONFIG_SMP=y
-CONFIG_NR_CPUS=2
-CONFIG_CROSS_COMPILE="powerpc-linux-"
-CONFIG_LOCALVERSION="-ANI-uCP1020-64EE512"
-# CONFIG_LOCALVERSION_AUTO is not set
-CONFIG_DEFAULT_HOSTNAME="uCP1020-64EE512"
-# CONFIG_SWAP is not set
-CONFIG_SYSVIPC=y
-CONFIG_POSIX_MQUEUE=y
-CONFIG_AUDIT=y
-CONFIG_NO_HZ_IDLE=y
-CONFIG_BSD_PROCESS_ACCT=y
-CONFIG_IKCONFIG=y
-CONFIG_IKCONFIG_PROC=y
-CONFIG_LOG_BUF_SHIFT=14
-CONFIG_LOG_CPU_MAX_BUF_SHIFT=14
-CONFIG_SYSFS_DEPRECATED=y
-CONFIG_BLK_DEV_INITRD=y
-# CONFIG_RD_BZIP2 is not set
-# CONFIG_RD_LZMA is not set
-# CONFIG_RD_XZ is not set
-# CONFIG_RD_LZO is not set
-# CONFIG_RD_LZ4 is not set
-CONFIG_SYSCTL_SYSCALL=y
-CONFIG_EMBEDDED=y
-# CONFIG_SLUB_DEBUG is not set
-# CONFIG_COMPAT_BRK is not set
-CONFIG_JUMP_LABEL=y
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-CONFIG_MODULE_FORCE_UNLOAD=y
-# CONFIG_BLK_DEV_BSG is not set
-CONFIG_PARTITION_ADVANCED=y
-CONFIG_MAC_PARTITION=y
-# CONFIG_EFI_PARTITION is not set
-# CONFIG_IOSCHED_CFQ is not set
-CONFIG_UCP1020_SOM=y
-CONFIG_HIGHMEM=y
-CONFIG_PREEMPT=y
-# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
-CONFIG_MATH_EMULATION=y
-CONFIG_MATH_EMULATION_HW_UNIMPLEMENTED=y
-CONFIG_SWIOTLB=y
-# CONFIG_COMPACTION is not set
-CONFIG_PCI=y
-CONFIG_PCIEPORTBUS=y
-# CONFIG_PCIEAER is not set
-# CONFIG_PCIEASPM is not set
-CONFIG_PCI_MSI=y
-CONFIG_NET=y
-CONFIG_PACKET=y
-CONFIG_UNIX=y
-CONFIG_XFRM_USER=y
-CONFIG_NET_KEY=y
-CONFIG_INET=y
-CONFIG_IP_MULTICAST=y
-CONFIG_SYN_COOKIES=y
-# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
-# CONFIG_INET_XFRM_MODE_TUNNEL is not set
-# CONFIG_INET_XFRM_MODE_BEET is not set
-# CONFIG_INET_LRO is not set
-# CONFIG_IPV6 is not set
-CONFIG_NETFILTER=y
-CONFIG_BRIDGE_NETFILTER=y
-CONFIG_NF_CONNTRACK=y
-CONFIG_NF_CONNTRACK_FTP=y
-CONFIG_NETFILTER_XT_TARGET_CONNMARK=y
-CONFIG_NETFILTER_XT_TARGET_MARK=y
-CONFIG_NETFILTER_XT_MATCH_COMMENT=y
-CONFIG_NETFILTER_XT_MATCH_CONNMARK=y
-CONFIG_NETFILTER_XT_MATCH_CONNTRACK=y
-CONFIG_NETFILTER_XT_MATCH_HELPER=y
-CONFIG_NETFILTER_XT_MATCH_MARK=y
-CONFIG_NETFILTER_XT_MATCH_MULTIPORT=y
-CONFIG_NETFILTER_XT_MATCH_STATE=y
-CONFIG_NF_CONNTRACK_IPV4=y
-CONFIG_IP_NF_IPTABLES=y
-CONFIG_IP_NF_FILTER=y
-CONFIG_IP_NF_TARGET_REJECT=y
-CONFIG_IP_NF_NAT=y
-CONFIG_IP_NF_TARGET_MASQUERADE=y
-CONFIG_IP_NF_TARGET_NETMAP=y
-CONFIG_IP_NF_TARGET_REDIRECT=y
-CONFIG_IP_NF_MANGLE=y
-CONFIG_BRIDGE=y
-CONFIG_VLAN_8021Q=y
-CONFIG_NET_SCHED=y
-CONFIG_NET_SCH_HTB=y
-CONFIG_CFG80211=y
-# CONFIG_CFG80211_DEFAULT_PS is not set
-CONFIG_MAC80211=y
-# CONFIG_MAC80211_RC_MINSTREL is not set
-CONFIG_UEVENT_HELPER_PATH="/bin/hotplug"
-CONFIG_FW_LOADER_USER_HELPER_FALLBACK=y
-CONFIG_MTD=y
-CONFIG_MTD_CMDLINE_PARTS=y
-CONFIG_MTD_BLOCK=y
-CONFIG_FTL=y
-CONFIG_MTD_CFI=y
-CONFIG_MTD_CFI_INTELEXT=y
-CONFIG_MTD_CFI_AMDSTD=y
-CONFIG_MTD_PHYSMAP_OF=y
-CONFIG_MTD_M25P80=y
-CONFIG_MTD_SST25L=y
-CONFIG_MTD_NAND=y
-CONFIG_MTD_NAND_PLATFORM=y
-CONFIG_MTD_NAND_FSL_ELBC=y
-CONFIG_MTD_NAND_FSL_UPM=y
-CONFIG_MTD_SPI_NOR=y
-CONFIG_BLK_DEV_LOOP=y
-CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_SIZE=131072
-CONFIG_EEPROM_AT25=y
-CONFIG_SCSI=y
-CONFIG_BLK_DEV_SD=y
-CONFIG_CHR_DEV_ST=y
-CONFIG_BLK_DEV_SR=y
-CONFIG_CHR_DEV_SG=y
-CONFIG_SCSI_LOGGING=y
-CONFIG_NETDEVICES=y
-# CONFIG_NET_VENDOR_3COM is not set
-# CONFIG_NET_VENDOR_ADAPTEC is not set
-# CONFIG_NET_VENDOR_AGERE is not set
-# CONFIG_NET_VENDOR_ALTEON is not set
-# CONFIG_NET_VENDOR_AMD is not set
-# CONFIG_NET_VENDOR_ARC is not set
-# CONFIG_NET_VENDOR_ATHEROS is not set
-# CONFIG_NET_CADENCE is not set
-# CONFIG_NET_VENDOR_BROADCOM is not set
-# CONFIG_NET_VENDOR_BROCADE is not set
-# CONFIG_NET_VENDOR_CHELSIO is not set
-# CONFIG_NET_VENDOR_CISCO is not set
-# CONFIG_NET_VENDOR_DEC is not set
-# CONFIG_NET_VENDOR_DLINK is not set
-# CONFIG_NET_VENDOR_EMULEX is not set
-# CONFIG_NET_VENDOR_EXAR is not set
-CONFIG_GIANFAR=y
-# CONFIG_NET_VENDOR_HP is not set
-# CONFIG_NET_VENDOR_INTEL is not set
-# CONFIG_NET_VENDOR_MARVELL is not set
-# CONFIG_NET_VENDOR_MELLANOX is not set
-# CONFIG_NET_VENDOR_MICREL is not set
-# CONFIG_NET_VENDOR_MICROCHIP is not set
-# CONFIG_NET_VENDOR_MYRI is not set
-# CONFIG_NET_VENDOR_NATSEMI is not set
-# CONFIG_NET_VENDOR_NVIDIA is not set
-# CONFIG_NET_VENDOR_OKI is not set
-# CONFIG_NET_PACKET_ENGINE is not set
-# CONFIG_NET_VENDOR_QLOGIC is not set
-# CONFIG_NET_VENDOR_QUALCOMM is not set
-# CONFIG_NET_VENDOR_REALTEK is not set
-# CONFIG_NET_VENDOR_RDC is not set
-# CONFIG_NET_VENDOR_ROCKER is not set
-# CONFIG_NET_VENDOR_SAMSUNG is not set
-# CONFIG_NET_VENDOR_SEEQ is not set
-# CONFIG_NET_VENDOR_SILAN is not set
-# CONFIG_NET_VENDOR_SIS is not set
-# CONFIG_NET_VENDOR_SMSC is not set
-# CONFIG_NET_VENDOR_STMICRO is not set
-# CONFIG_NET_VENDOR_SUN is not set
-# CONFIG_NET_VENDOR_TEHUTI is not set
-# CONFIG_NET_VENDOR_TI is not set
-# CONFIG_NET_VENDOR_VIA is not set
-# CONFIG_NET_VENDOR_WIZNET is not set
-# CONFIG_NET_VENDOR_XILINX is not set
-CONFIG_MICREL_PHY=y
-CONFIG_IWLWIFI=m
-# CONFIG_INPUT_MOUSEDEV is not set
-# CONFIG_INPUT_KEYBOARD is not set
-# CONFIG_INPUT_MOUSE is not set
-CONFIG_SERIO_LIBPS2=y
-CONFIG_LEGACY_PTY_COUNT=16
-CONFIG_NOZOMI=y
-CONFIG_SERIAL_8250=y
-CONFIG_SERIAL_8250_CONSOLE=y
-CONFIG_SERIAL_8250_NR_UARTS=2
-CONFIG_SERIAL_8250_RUNTIME_UARTS=2
-CONFIG_SERIAL_8250_MANY_PORTS=y
-CONFIG_SERIAL_8250_DETECT_IRQ=y
-CONFIG_SERIAL_8250_RSA=y
-CONFIG_NVRAM=y
-CONFIG_I2C_CHARDEV=y
-CONFIG_I2C_MPC=y
-CONFIG_SPI=y
-CONFIG_SPI_BITBANG=y
-CONFIG_SPI_FSL_ESPI=y
-CONFIG_SPI_SPIDEV=y
-CONFIG_GPIOLIB=y
-CONFIG_GPIO_MPC8XXX=y
-CONFIG_SENSORS_LM90=y
-CONFIG_THERMAL=y
-CONFIG_WATCHDOG=y
-CONFIG_BOOKE_WDT=y
-CONFIG_BOOKE_WDT_DEFAULT_TIMEOUT=36
-CONFIG_MEDIA_SUPPORT=y
-CONFIG_MEDIA_CAMERA_SUPPORT=y
-CONFIG_MEDIA_CONTROLLER=y
-CONFIG_VIDEO_V4L2_SUBDEV_API=y
-CONFIG_MEDIA_USB_SUPPORT=y
-CONFIG_USB_VIDEO_CLASS=y
-CONFIG_USB_GSPCA=y
-CONFIG_USB_PWC=y
-CONFIG_USB_ZR364XX=y
-CONFIG_USB_STKWEBCAM=y
-CONFIG_VIDEO_EM28XX=y
-CONFIG_VIDEO_EM28XX_V4L2=y
-# CONFIG_HID is not set
-# CONFIG_USB_HID is not set
-CONFIG_USB=y
-CONFIG_USB_ANNOUNCE_NEW_DEVICES=y
-CONFIG_USB_DYNAMIC_MINORS=y
-CONFIG_USB_MON=y
-CONFIG_USB_EHCI_HCD=y
-CONFIG_USB_EHCI_FSL=y
-CONFIG_USB_ACM=y
-CONFIG_USB_WDM=y
-CONFIG_USB_TMC=y
-CONFIG_USB_STORAGE=y
-CONFIG_USB_STORAGE_DEBUG=y
-CONFIG_USB_MDC800=y
-CONFIG_MMC=y
-CONFIG_MMC_SDHCI=y
-CONFIG_MMC_SDHCI_PLTFM=y
-CONFIG_MMC_SDHCI_OF_ESDHC=y
-CONFIG_DMADEVICES=y
-CONFIG_FSL_DMA=y
-CONFIG_ASYNC_TX_DMA=y
-# CONFIG_IOMMU_SUPPORT is not set
-CONFIG_EXT2_FS=y
-CONFIG_EXT3_FS=y
-# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
-# CONFIG_EXT3_FS_XATTR is not set
-CONFIG_EXT4_FS=y
-CONFIG_XFS_FS=y
-CONFIG_MSDOS_FS=y
-CONFIG_VFAT_FS=y
-CONFIG_NTFS_FS=y
-CONFIG_PROC_KCORE=y
-CONFIG_TMPFS=y
-CONFIG_JFFS2_FS=y
-CONFIG_JFFS2_FS_WBUF_VERIFY=y
-CONFIG_JFFS2_SUMMARY=y
-CONFIG_JFFS2_FS_XATTR=y
-CONFIG_JFFS2_COMPRESSION_OPTIONS=y
-CONFIG_JFFS2_LZO=y
-CONFIG_JFFS2_RUBIN=y
-CONFIG_CRAMFS=y
-CONFIG_NFS_FS=y
-CONFIG_NFS_V4=y
-CONFIG_NFSD=y
-CONFIG_CIFS=y
-CONFIG_NLS_CODEPAGE_437=y
-CONFIG_NLS_ISO8859_1=y
-CONFIG_CRC_T10DIF=y
-CONFIG_CRC_ITU_T=y
-# CONFIG_SCHED_DEBUG is not set
-# CONFIG_DEBUG_PREEMPT is not set
-# CONFIG_DEBUG_BUGVERBOSE is not set
-CONFIG_RCU_CPU_STALL_TIMEOUT=60
-# CONFIG_RCU_CPU_STALL_INFO is not set
-# CONFIG_FTRACE is not set
-CONFIG_CRYPTO_CBC=y
-CONFIG_CRYPTO_PCBC=y
-CONFIG_CRYPTO_SHA1=y
-CONFIG_CRYPTO_SHA1_PPC=y
-CONFIG_CRYPTO_DEFLATE=y
-# CONFIG_CRYPTO_ANSI_CPRNG is not set
-CONFIG_CRYPTO_DEV_TALITOS=y
+++ /dev/null
-From a243628639e12a4bd0a737eac78a12ed240cd137 Mon Sep 17 00:00:00 2001
-From: Oleksandr G Zhadan <oleks@arcturusnetworks.com>
-Date: Mon, 18 Jul 2016 10:40:16 -0400
-Subject: [PATCH] Arcturus uCP1020 BSP support
-
-The uCP1020 product family (ucp1020) is an Arcturus Networks Inc.
-System on Modules product featuring a NXP QorIQ P1020 CPU,
-optionally populated with 1 or 2 Gig-Ethernet PHYs,
-DDR3, NOR Flash, eMMC NAND Flash and/or SPI Flash.
-
-Signed-off-by: Oleksandr G Zhadan <oleks@arcturusnetworks.com>
-Signed-off-by: Michael Durrant <arcsupport@arcturusnetworks.com>
----
- arch/powerpc/boot/dts/ucp1020.dts | 87 ++++++++++++
- arch/powerpc/boot/dts/ucp1020.dtsi | 211 ++++++++++++++++++++++++++++++
- arch/powerpc/platforms/85xx/Kconfig | 7 +
- arch/powerpc/platforms/85xx/Makefile | 1 +
- arch/powerpc/platforms/85xx/ucp1020_som.c | 92 +++++++++++++
- 5 files changed, 398 insertions(+)
- create mode 100644 arch/powerpc/boot/dts/ucp1020.dts
- create mode 100644 arch/powerpc/boot/dts/ucp1020.dtsi
- create mode 100644 arch/powerpc/platforms/85xx/ucp1020_som.c
-
-diff --git a/arch/powerpc/boot/dts/ucp1020.dts b/arch/powerpc/boot/dts/ucp1020.dts
-new file mode 100644
-index 0000000..291e70a
---- /dev/null
-+++ b/arch/powerpc/boot/dts/ucp1020.dts
-@@ -0,0 +1,87 @@
-+/*
-+ * uCP1020 Tree Source (32-bit address map)
-+ *
-+ * Copyright 2013-2016 Arcturus Networks Inc.
-+ *
-+ * Redistribution and use in source and binary forms, with or without
-+ * modification, are permitted provided that the following conditions are met:
-+ * * Redistributions of source code must retain the above copyright
-+ * notice, this list of conditions and the following disclaimer.
-+ * * Redistributions in binary form must reproduce the above copyright
-+ * notice, this list of conditions and the following disclaimer in the
-+ * documentation and/or other materials provided with the distribution.
-+ * * Neither the name of Freescale Semiconductor nor the
-+ * names of its contributors may be used to endorse or promote products
-+ * derived from this software without specific prior written permission.
-+ *
-+ *
-+ * ALTERNATIVELY, this software may be distributed under the terms of the
-+ * GNU General Public License ("GPL") as published by the Free Software
-+ * Foundation, either version 2 of that License or (at your option) any
-+ * later version.
-+ *
-+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
-+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
-+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
-+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
-+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
-+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
-+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
-+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
-+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
-+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
-+ */
-+
-+/include/ "fsl/p1020si-pre.dtsi"
-+/ {
-+ model = "arcturus,uCP1020";
-+ compatible = "arcturus,uCP1020";
-+
-+ memory {
-+ device_type = "memory";
-+ };
-+
-+ lbc: localbus@ffe05000 {
-+ reg = <0 0xffe05000 0 0x1000>;
-+
-+ /* NOR Flash */
-+ ranges = <0x0 0x0 0x0 0xec000000 0x04000000>;
-+ };
-+
-+ soc: soc@ffe00000 {
-+ ranges = <0x0 0x0 0xffe00000 0x100000>;
-+ };
-+
-+ pci0: pcie@ffe09000 {
-+ ranges = <0x2000000 0x0 0xa0000000 0 0xa0000000 0x0 0x20000000
-+ 0x1000000 0x0 0x00000000 0 0xffc10000 0x0 0x10000>;
-+ reg = <0 0xffe09000 0 0x1000>;
-+ pcie@0 {
-+ ranges = <0x2000000 0x0 0xa0000000
-+ 0x2000000 0x0 0xa0000000
-+ 0x0 0x20000000
-+
-+ 0x1000000 0x0 0x0
-+ 0x1000000 0x0 0x0
-+ 0x0 0x100000>;
-+ };
-+ };
-+
-+ pci1: pcie@ffe0a000 {
-+ reg = <0 0xffe0a000 0 0x1000>;
-+ ranges = <0x2000000 0x0 0x80000000 0 0x80000000 0x0 0x20000000
-+ 0x1000000 0x0 0x00000000 0 0xffc00000 0x0 0x10000>;
-+ pcie@0 {
-+ ranges = <0x2000000 0x0 0x80000000
-+ 0x2000000 0x0 0x80000000
-+ 0x0 0x20000000
-+
-+ 0x1000000 0x0 0x0
-+ 0x1000000 0x0 0x0
-+ 0x0 0x100000>;
-+ };
-+ };
-+};
-+
-+/include/ "ucp1020.dtsi"
-+/include/ "fsl/p1020si-post.dtsi"
-diff --git a/arch/powerpc/boot/dts/ucp1020.dtsi b/arch/powerpc/boot/dts/ucp1020.dtsi
-new file mode 100644
-index 0000000..7cff949
---- /dev/null
-+++ b/arch/powerpc/boot/dts/ucp1020.dtsi
-@@ -0,0 +1,211 @@
-+/*
-+ * uCP1020 Device Tree Source stub (no addresses or top-level ranges)
-+ *
-+ * Copyright 2013-2016 Arcturus Networks Inc.
-+ *
-+ * Redistribution and use in source and binary forms, with or without
-+ * modification, are permitted provided that the following conditions are met:
-+ * * Redistributions of source code must retain the above copyright
-+ * notice, this list of conditions and the following disclaimer.
-+ * * Redistributions in binary form must reproduce the above copyright
-+ * notice, this list of conditions and the following disclaimer in the
-+ * documentation and/or other materials provided with the distribution.
-+ * * Neither the name of Freescale Semiconductor nor the
-+ * names of its contributors may be used to endorse or promote products
-+ * derived from this software without specific prior written permission.
-+ *
-+ *
-+ * ALTERNATIVELY, this software may be distributed under the terms of the
-+ * GNU General Public License ("GPL") as published by the Free Software
-+ * Foundation, either version 2 of that License or (at your option) any
-+ * later version.
-+ *
-+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
-+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
-+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
-+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
-+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
-+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
-+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
-+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
-+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
-+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
-+ */
-+
-+&lbc {
-+ nor@0,0 {
-+ #address-cells = <1>;
-+ #size-cells = <1>;
-+ compatible = "cfi-flash";
-+ reg = <0x0 0x0 0x04000000>;
-+ bank-width = <2>;
-+ device-width = <1>;
-+
-+ partition@100000 {
-+ /* 7MB - PART 0 */
-+ reg = <0x00100000 0x00700000>;
-+ label = "0";
-+ };
-+
-+ partition@800000 {
-+ /* 32MB - PART 1 */
-+ reg = <0x0800000 0x02000000>;
-+ label = "1";
-+ };
-+
-+ partition@2800000 {
-+ /* 8MB - PART 2 */
-+ reg = <0x02800000 0x00800000>;
-+ label = "2";
-+ };
-+
-+ partition@3000000 {
-+ /* (16MB - 512K) - PART 3 JFFS 2 */
-+ reg = <0x03000000 0x00f80000>;
-+ label = "3";
-+ };
-+
-+ partition@0 {
-+ /* 512KB - bootloader[u-boot, uCbootloader] */
-+ reg = <0x0 0x00080000>;
-+ label = "BOOT_SPI";
-+ };
-+
-+ partition@3f80000 {
-+ /* 512KB - bootloade NOR r[u-boot, uCbootloader] */
-+ reg = <0x03f80000 0x00080000>;
-+ label = "B";
-+ };
-+
-+ partition@80000 {
-+ /* 256KB - bootloaders environment (uCenv) */
-+ reg = <0x00080000 0x00040000>;
-+
-+ label = "E";
-+ };
-+
-+ partition@C0000 {
-+ /* 256KB - bootloaders environment (u-boot) */
-+ reg = <0x000C0000 0x00040000>;
-+ label = "UENV";
-+ };
-+ };
-+};
-+
-+&soc {
-+ i2c@3000 {
-+ spoc@14 {
-+ compatible = "conexant,cx2070x";
-+ reg = <0x14>;
-+ };
-+ };
-+
-+ i2c@3100 {
-+ dtt@4C {
-+ compatible = "national,lm90";
-+ reg = <0x4C>;
-+ };
-+ };
-+
-+ spi@7000 {
-+ flash@0 {
-+ #address-cells = <1>;
-+ #size-cells = <1>;
-+ compatible = "winbond,w25q80bl";
-+ reg = <0>;
-+ spi-max-frequency = <40000000>; /* input clock */
-+
-+ partition@0 {
-+ label = "SPI MBR";
-+ reg = <0x00000000 0x00002000>;
-+ read-only;
-+ };
-+ partition@2000 {
-+ label = "SPI ENV";
-+ reg = <0x00002000 0x00006000>;
-+ read-only;
-+ };
-+ partition@8000 {
-+ label = "SPI FS";
-+ reg = <0x00008000 0x000F8000>;
-+ };
-+ };
-+ flash@3 {
-+ #address-cells = <1>;
-+ #size-cells = <1>;
-+ compatible = "spansion,s25fl008k";
-+ reg = <3>;
-+ spi-max-frequency = <40000000>; /* input clock */
-+ partition@0 {
-+ label = "SPI USER";
-+ reg = <0x00000000 0x00100000>;
-+ };
-+ };
-+ };
-+
-+ usb@22000 {
-+ phy_type = "ulpi";
-+ dr_mode = "host";
-+ };
-+
-+ mdio@24000 {
-+ phy0: ethernet-phy@4 {
-+ interrupt-parent = <&mpic>;
-+ interrupts = <4 1>;
-+ reg = <0x04>;
-+ };
-+
-+ phy1: ethernet-phy@6 {
-+ interrupt-parent = <&mpic>;
-+ interrupts = <8 1>;
-+ reg = <0x6>;
-+ };
-+ };
-+
-+ enet0: ethernet@b0000 {
-+ phy-handle = <&phy0>;
-+ phy-connection-type = "rgmii-id";
-+ };
-+
-+ enet1: ethernet@b1000 {
-+ status = "disabled";
-+ };
-+
-+ enet2: ethernet@b2000 {
-+ phy-handle = <&phy1>;
-+ phy-connection-type = "rgmii-id";
-+ };
-+
-+ gpio0: gpio@f000 {
-+ compatible = "fsl,mpc8572-gpio", "fsl,pq3-gpio";
-+ reg = <0xf000 0x1000>;
-+ interrupts = <47 2>;
-+ interrupt-parent = <&mpic>;
-+ #gpio-cells = <2>;
-+ gpio-controller;
-+ };
-+
-+ gpio-leds {
-+ compatible = "gpio-leds";
-+ gpio5 {
-+ label = "led1"; /* LED15 */
-+ gpios = <&gpio0 5 0>;
-+ };
-+ gpio12 {
-+ label = "led2"; /* LED16 */
-+ gpios = <&gpio0 12 0>;
-+ };
-+ gpio13 {
-+ label = "led3"; /* LED17 */
-+ gpios = <&gpio0 13 0>;
-+ };
-+ gpio7 {
-+ label = "led4"; /* LED18 */
-+ gpios = <&gpio0 7 0>;
-+ };
-+ gpio6 {
-+ label = "led5"; /* LED19 */
-+ gpios = <&gpio0 6 0>;
-+ };
-+ };
-+};
-diff --git a/arch/powerpc/platforms/85xx/Kconfig b/arch/powerpc/platforms/85xx/Kconfig
-index 2fb4b24..81a944f 100644
---- a/arch/powerpc/platforms/85xx/Kconfig
-+++ b/arch/powerpc/platforms/85xx/Kconfig
-@@ -241,6 +241,13 @@ config SGY_CTS1000
- help
- Enable this to support functionality in Servergy's CTS-1000 systems.
-
-+config UCP1020_SOM
-+ bool "Arcturus uCP1020 Rev.1.3 System on Module"
-+ select DEFAULT_UIMAGE
-+ help
-+ This option enables support for the Arcturus Networks Inc.
-+ uCP1020 System on Module.
-+
- config MVME2500
- bool "Artesyn MVME2500"
- select DEFAULT_UIMAGE
-diff --git a/arch/powerpc/platforms/85xx/Makefile b/arch/powerpc/platforms/85xx/Makefile
-index 1fe7fb9..84f2b9a 100644
---- a/arch/powerpc/platforms/85xx/Makefile
-+++ b/arch/powerpc/platforms/85xx/Makefile
-@@ -31,4 +31,5 @@ obj-$(CONFIG_XES_MPC85xx) += xes_mpc85xx.o
- obj-$(CONFIG_GE_IMP3A) += ge_imp3a.o
- obj-$(CONFIG_PPC_QEMU_E500) += qemu_e500.o
- obj-$(CONFIG_SGY_CTS1000) += sgy_cts1000.o
-+obj-$(CONFIG_UCP1020_SOM) += ucp1020_som.o
- obj-$(CONFIG_MVME2500) += mvme2500.o
-diff --git a/arch/powerpc/platforms/85xx/ucp1020_som.c b/arch/powerpc/platforms/85xx/ucp1020_som.c
-new file mode 100644
-index 0000000..777e8ad
---- /dev/null
-+++ b/arch/powerpc/platforms/85xx/ucp1020_som.c
-@@ -0,0 +1,92 @@
-+/*
-+ * Arcturus Networks Inc. uCP1020 module Setup
-+ *
-+ * Copyright 2014-2016 Arcturus Networks Inc.
-+ *
-+ * by Oleksandr G Zhadan & Michael Durrant (www.ArcturusNetworks.com)
-+ *
-+ * This program is free software; you can redistribute it and/or modify it
-+ * under the terms of the GNU General Public License as published by the
-+ * Free Software Foundation; either version 2 of the License, or (at your
-+ * option) any later version.
-+ */
-+
-+#include <linux/stddef.h>
-+#include <linux/kernel.h>
-+#include <linux/pci.h>
-+#include <linux/kdev_t.h>
-+#include <linux/delay.h>
-+#include <linux/seq_file.h>
-+#include <linux/interrupt.h>
-+#include <linux/of_platform.h>
-+
-+#include <asm/time.h>
-+#include <asm/machdep.h>
-+#include <asm/pci-bridge.h>
-+#include <mm/mmu_decl.h>
-+#include <asm/prom.h>
-+#include <asm/udbg.h>
-+#include <asm/mpic.h>
-+#include <asm/fsl_guts.h>
-+
-+#include <sysdev/fsl_soc.h>
-+#include <sysdev/fsl_pci.h>
-+#include "smp.h"
-+
-+#include "mpc85xx.h"
-+
-+void __init ucp1020_som_pic_init(void)
-+{
-+ struct mpic *mpic = mpic_alloc(NULL, 0, MPIC_BIG_ENDIAN |
-+ MPIC_SINGLE_DEST_CPU,
-+ 0, 256, " OpenPIC ");
-+
-+ BUG_ON(mpic == NULL);
-+
-+ mpic_init(mpic);
-+}
-+
-+/*
-+ * Setup the architecture
-+ */
-+static void __init ucp1020_som_setup_arch(void)
-+{
-+ if (ppc_md.progress)
-+ ppc_md.progress("uCP1020_SoM_setup_arch()", 0);
-+
-+ mpc85xx_smp_init();
-+
-+ fsl_pci_assign_primary();
-+ pr_info("\n\t%s (http://www.arcturusnetworks.com)\n", ppc_md.name);
-+}
-+
-+machine_arch_initcall(ucp1020, mpc85xx_common_publish_devices);
-+machine_arch_initcall(ucp1020, swiotlb_setup_bus_notifier);
-+
-+/*
-+ * Called very early, device-tree isn't unflattened
-+ */
-+static int __init ucp1020_probe(void)
-+{
-+ unsigned long root = of_get_flat_dt_root();
-+
-+ if (of_flat_dt_is_compatible(root, "arcturus,uCP1020"))
-+ return 1;
-+ return 0;
-+}
-+
-+define_machine(ucp1020) {
-+ .name = "uCP1020 SoM - Arcturus Networks Inc.",
-+ .probe = ucp1020_probe,
-+ .setup_arch = ucp1020_som_setup_arch,
-+ .init_IRQ = ucp1020_som_pic_init,
-+#ifdef CONFIG_PCI
-+ .pcibios_fixup_bus = fsl_pcibios_fixup_bus,
-+#endif
-+ .get_irq = mpic_get_irq,
-+ .restart = fsl_rstcr_restart,
-+ .calibrate_decr = generic_calibrate_decr,
-+#ifdef DEBUG
-+ .progress = udbg_progress,
-+#endif
-+};
---
-2.1.4
-
+++ /dev/null
-From 35b7ce4f8f290794d3b89db7461e8c568b5defa1 Mon Sep 17 00:00:00 2001
-From: Khem Raj <raj.khem@gmail.com>
-Date: Mon, 25 Apr 2016 09:19:17 -0700
-Subject: powerpc/ptrace: Fix out of bounds array access warning
-
-commit 1e407ee3b21f981140491d5b8a36422979ca246f upstream.
-
-gcc-6 correctly warns about a out of bounds access
-
-arch/powerpc/kernel/ptrace.c:407:24: warning: index 32 denotes an offset greater than size of 'u64[32][1] {aka long long unsigned int[32][1]}' [-Warray-bounds]
- offsetof(struct thread_fp_state, fpr[32][0]));
- ^
-
-check the end of array instead of beginning of next element to fix this
-
-Signed-off-by: Khem Raj <raj.khem@gmail.com>
-Cc: Kees Cook <keescook@chromium.org>
-Cc: Michael Ellerman <mpe@ellerman.id.au>
-Cc: Segher Boessenkool <segher@kernel.crashing.org>
-Tested-by: Aaro Koskinen <aaro.koskinen@iki.fi>
-Acked-by: Olof Johansson <olof@lixom.net>
-Cc: Arnd Bergmann <arnd@arndb.de>
-Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
-Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-Signed-off-by: Oleksandr Zhadan <oleks@arcturusnetworks.com>
----
- arch/powerpc/kernel/ptrace.c | 4 ++--
- 1 file changed, 2 insertions(+), 2 deletions(-)
-
-diff --git a/arch/powerpc/kernel/ptrace.c b/arch/powerpc/kernel/ptrace.c
-index f21897b..93f200f 100644
---- a/arch/powerpc/kernel/ptrace.c
-+++ b/arch/powerpc/kernel/ptrace.c
-@@ -376,7 +376,7 @@ static int fpr_get(struct task_struct *target, const struct user_regset *regset,
-
- #else
- BUILD_BUG_ON(offsetof(struct thread_fp_state, fpscr) !=
-- offsetof(struct thread_fp_state, fpr[32][0]));
-+ offsetof(struct thread_fp_state, fpr[32]));
-
- return user_regset_copyout(&pos, &count, &kbuf, &ubuf,
- &target->thread.fp_state, 0, -1);
-@@ -404,7 +404,7 @@ static int fpr_set(struct task_struct *target, const struct user_regset *regset,
- return 0;
- #else
- BUILD_BUG_ON(offsetof(struct thread_fp_state, fpscr) !=
-- offsetof(struct thread_fp_state, fpr[32][0]));
-+ offsetof(struct thread_fp_state, fpr[32]));
-
- return user_regset_copyin(&pos, &count, &kbuf, &ubuf,
- &target->thread.fp_state, 0, -1);
---
-cgit v1.1
projects / buildroot.git / commitdiff