Mon Feb 5 10:38:27 1996 Ian Lance Taylor <ian@cygnus.com>
+ Support for building as a shared library, based on patches from
+ Alan Modra <alan@spri.levels.unisa.edu.au>:
+ * configure.in: Add AC_ARG_ENABLE for shared and commonbfdlib.
+ New substitutions: ALLLIBS, PICFLAG, SHLIB, SHLIB_CC,
+ SHLIB_CFLAGS, COMMON_SHLIB, PICLIST, SHLINK.
+ * configure: Rebuild.
+ * configure.host: If --enable-shared, adjust shared library stuff
+ based on the host. If the host is SunOS, and the linker supports
+ -rpath, set HLDFLAGS to use it.
+ * Makefile.in (ALLLIBS): New variable.
+ (PICFLAG, SHLIB, SHLIB_CC, SHLIB_CFLAGS): New variables.
+ (COMMON_SHLIB, SHLINK): New variables.
+ (.c.o): If PICFLAG is set, compile twice, once PIC, once normal.
+ (STAGESTUFF): Remove variable.
+ (all): Depend upon $(ALLLIBS) and @PICLIST@ rather than
+ $(TARGETLIB).
+ (stamp-ofiles): New target, like old ofiles target, but build
+ using a temporary file and move-if-change, and touch stamp-ofiles
+ when done.
+ (ofiles): Just depend upon stamp-ofiles.
+ (stamp-piclist, piclist): New targets.
+ ($(SHLIB), $(SHLINK)): New targets.
+ (targets.o, archures.o): Build twice if PICFLAG is set.
+ (do_mostlyclean): Remove pic/*.o.
+ (do_clean): Remove stamp-ofiles, $(SHLIB), $(SHLINK), piclist, and
+ stamp-piclist.
+ (do_distclean): Remove pic and stamp-picdir.
+ (install): Install shared libraries.
+ ($(OFILES)): Depend upon stamp-picdir.
+ (stamp-picdir): New target.
+
* libcoff-in.h: Add comment reminding people that libcoff.h is a
generated file.
* libcoff.h: Rebuild.
MAKEINFO = makeinfo
RANLIB = @RANLIB@
+ALLLIBS = @ALLLIBS@
+
+PICFLAG = @PICFLAG@
+SHLIB = @SHLIB@
+SHLIB_CC = @SHLIB_CC@
+SHLIB_CFLAGS = @SHLIB_CFLAGS@
+COMMON_SHLIB = @COMMON_SHLIB@
+SHLINK = @SHLINK@
+
CC_FOR_BUILD = @CC_FOR_BUILD@
INCDIR = $(srcdir)/../include
ALL_CFLAGS=@HDEFINES@ @COREFLAG@ @TDEFINES@ $(CSEARCH) $(CSWITCHES) $(CFLAGS)
.c.o:
+ if [ -n "$(PICFLAG)" ]; then \
+ $(CC) -c $(PICFLAG) $(ALL_CFLAGS) $< -o pic/$@; \
+ else true; fi
$(CC) -c $(ALL_CFLAGS) $<
bfd_libs_here =
libcoff.h libecoff.h elf-bfd.h libhppa.h libieee.h libnlm.h \
liboasys.h nlm-target.h nlmcode.h som.h genlink.h netbsd.h
-STAGESTUFF = $(TARGETLIB) $(OFILES)
-
-all: Makefile $(TARGETLIB)
+all: Makefile $(ALLLIBS) @PICLIST@
@$(MAKE) subdir_do DO=all "DODIRS=$(SUBDIRS)" $(FLAGS_TO_PASS)
.NOEXPORT:
# COREFILE Core file routines for a native configuration
OFILES = $(BFD_LIBS) $(BFD_BACKENDS) $(BFD_MACHINES) @COREFILE@
-ofiles : Makefile
- rm -f ofiles
+stamp-ofiles: Makefile
+ rm -f tofiles
f=""; \
for i in $(OFILES) ; do \
case " $$f " in \
*) f="$$f $$i" ;; \
esac ; \
done ; \
- echo $$f > ofiles
+ echo $$f > tofiles
+ $(srcdir)/../move-if-change tofiles ofiles
+ touch stamp-ofiles
+
+ofiles: stamp-ofiles ; @true
$(TARGETLIB): $(OFILES) ofiles
rm -f $(TARGETLIB)
$(AR) $(AR_FLAGS) $(TARGETLIB) `cat ofiles`
$(RANLIB) $(TARGETLIB)
+stamp-piclist: ofiles
+ rm -f tpiclist
+ if [ -n "$(PICFLAG)" ]; then \
+ sed -e 's,\([^ ][^ ]*\),pic/\1,g' ofiles > tpiclist; \
+ else \
+ cp ofiles tpiclist; \
+ fi
+ $(srcdir)/../move-if-change tpiclist piclist
+ touch stamp-piclist
+
+piclist: stamp-piclist ; @true
+
+$(SHLIB): stamp-picdir $(OFILES) piclist
+ rm -f $(SHLIB)
+ $(SHLIB_CC) $(SHLIB_CFLAGS) -o $(SHLIB) `cat piclist`
+
+$(SHLINK): $(SHLIB)
+ rm -f $(SHLINK)
+ ln -sf $(SHLIB) $(SHLINK)
+
# When compiling archures.c and targets.c, supply the default target
# info from configure.
targets.o: targets.c Makefile
- $(CC) -c $(ALL_CFLAGS) $(TDEFAULTS) $<
+ if [ -n "$(PICFLAG)" ]; then \
+ $(CC) -c $(PICFLAG) $(TDEFAULTS) $(ALL_CFLAGS) $(srcdir)/targets.c -o pic/targets.o; \
+ else true; fi
+ $(CC) -c $(TDEFAULTS) $(ALL_CFLAGS) $(srcdir)/targets.c
archures.o: archures.c Makefile
- $(CC) -c $(ALL_CFLAGS) $(TDEFAULTS) $<
+ if [ -n "$(PICFLAG)" ]; then \
+ $(CC) -c $(PICFLAG) $(TDEFAULTS) $(ALL_CFLAGS) $(srcdir)/archures.c -o pic/archures.o; \
+ else true; fi
+ $(CC) -c $(TDEFAULTS) $(ALL_CFLAGS) $(srcdir)/archures.c
elf32-target.h : elfxx-target.h
rm -f elf32-target.h
etags $(INCDIR)/*.h $(srcdir)/*.h $(srcdir)/*.c
do_mostlyclean:
- rm -f *.o *~ core *.E *.p *.ip aout-params.h gen-aout config.log
+ rm -f *.o *~ core *.E *.p *.ip aout-params.h gen-aout config.log \
+ pic/*.o
do_clean: do_mostlyclean
- rm -f libbfd.a TAGS bfd.h stmp-bfd.h ofiles \
- elf32-target.h elf64-target.h
+ rm -f libbfd.a TAGS bfd.h stmp-bfd.h ofiles stamp-ofiles \
+ elf32-target.h elf64-target.h $(SHLIB) $(SHLINK) \
+ piclist stamp-piclist
do_distclean: do_clean
rm -f Makefile config.status config.cache config.h stamp-h
-
+ rm -rf pic stamp-picdir
do_maintainer_clean: do_distclean
rm -f $(srcdir)/bfd-in2.h $(srcdir)/libbfd.h $(srcdir)/libcoff.h
#
force:
-install:
- $(INSTALL_DATA) libbfd.a $(libdir)/libbfd.a
- $(RANLIB) $(libdir)/libbfd.a
+install: $(ALLLIBS)
+ for f in $(ALLLIBS); do \
+ rm -f $(libdir)/$$f; \
+ if [ "$$f" = "$(SHLINK)" ]; then \
+ ln -sf $(SHLIB) $(libdir)/$$f; \
+ elif [ "$$f" = "$(SHLIB)" ]; then \
+ $(INSTALL_PROGRAM) $$f $(libdir)/$$f; \
+ else \
+ $(INSTALL_DATA) $$f $(libdir)/$$f; \
+ $(RANLIB) $(libdir)/$$f; \
+ chmod a-x $(libdir)/$$f; \
+ fi; \
+ done
# Install BFD include file, and others that it needs. Install them
# both in GCC's include directory, and in the system include dir
# if configured as $(oldincludedir) -- which it usually isnt.
# The rules for the generated header files are here so that people can
# type `make bfd-in2.h' if they remove it. They are not run by default.
bfd-in2.h:
- (cd $(docdir); $(MAKE) protos $(FLAGS_TO_PASS))
+ (cd $(docdir); $(MAKE) bfd.h $(FLAGS_TO_PASS))
cp $(docdir)/bfd.h bfd-in2.h-new
$(srcdir)/../move-if-change bfd-in2.h-new $(srcdir)/bfd-in2.h
libbfd.h:
- (cd $(docdir); $(MAKE) protos $(FLAGS_TO_PASS))
+ (cd $(docdir); $(MAKE) libbfd.h $(FLAGS_TO_PASS))
cp $(docdir)/libbfd.h libbfd.h-new
$(srcdir)/../move-if-change libbfd.h-new $(srcdir)/libbfd.h
libcoff.h:
- (cd $(docdir); $(MAKE) protos $(FLAGS_TO_PASS))
+ (cd $(docdir); $(MAKE) libcoff.h $(FLAGS_TO_PASS))
cp $(docdir)/libcoff.h libcoff.h-new
$(srcdir)/../move-if-change libcoff.h-new $(srcdir)/libcoff.h
$(INCDIR)/elf/arc.h elf32-target.h
end-sanitize-arc:
+$(OFILES): stamp-picdir
+
+stamp-picdir:
+ if [ -n "$(PICFLAG)" ] && [ ! -d pic ]; then \
+ mkdir pic; \
+ else true; fi
+ touch stamp-picdir
+
# What appears below is generated by a hacked mkdep using gcc -MM.
# DO NOT DELETE THIS LINE -- mkdep uses it.
--enable-64-bit-bfd 64-bit support (on hosts with narrower word sizes)"
ac_help="$ac_help
--enable-targets alternative target configurations"
+ac_help="$ac_help
+ --enable-shared build shared BFD library"
+ac_help="$ac_help
+ --enable-commonbfdlib build shared BFD/opcodes/libiberty library"
ac_help="$ac_help
--with-mmap try using mmap for BFD input files if available"
*) enable_targets=$enableval ;;
esac
fi
+# Check whether --enable-shared or --disable-shared was given.
+if test "${enable_shared+set}" = set; then
+ enableval="$enable_shared"
+ case "${enableval}" in
+ yes) shared=true ;;
+ no) shared=false ;;
+ *) { echo "configure: error: bad value ${enableval} for BFD shared option" 1>&2; exit 1; } ;;
+esac
+fi
+# Check whether --enable-commonbfdlib or --disable-commonbfdlib was given.
+if test "${enable_commonbfdlib+set}" = set; then
+ enableval="$enable_commonbfdlib"
+ case "${enableval}" in
+ yes) commonbfdlib=true ;;
+ no) commonbfdlib=false ;;
+ *) { echo "configure: error: bad value ${enableval} for BFD commonbfdlib option" 1>&2; exit 1; } ;;
+esac
+fi
# Check whether --with-mmap or --without-mmap was given.
if test "${with_mmap+set}" = set; then
withval="$with_mmap"
# host stuff:
+ALLLIBS='$(TARGETLIB)'
+PICFLAG=
+SHLIB=
+SHLINK=
+if test "${shared}" = "true"; then
+ PICFLAG=-fpic
+ if test "${commonbfdlib}" = "true"; then
+ ALLLIBS='$(TARGETLIB)'
+ else
+ ALLLIBS='$(TARGETLIB) $(SHLIB) $(SHLINK)'
+ SHLIB=libbfd.so.`sed -e 's/[^0-9]*\([0-9.]*\).*/\1/' ${srcdir}/VERSION`
+ SHLINK=libbfd.so
+ fi
+fi
+
# Permit host specific settings.
. ${srcdir}/configure.host
test -z "$INSTALL_DATA" && INSTALL_DATA='${INSTALL} -m 644'
+if test "${shared}" = "true"; then
+ if test "${GCC}" != "yes" && test "${shared_non_gcc}" != "yes"; then
+ echo "configure: warning: BFD --enable-shared only supported when using gcc" 1>&2
+ shared=false
+ PICFLAG=
+ SHLIB=
+ fi
+fi
+
+
+
+
+
+
+if test "${commonbfdlib}" = "true"; then
+ COMMON_SHLIB=yes
+ PICLIST=piclist
+else
+ COMMON_SHLIB=
+ PICLIST=
+fi
+
+
+
+
HOST_64BIT_LONG=0
if test "x${HOST_64BIT_TYPE}" = "xlong"; then
HOST_64BIT_LONG=1
ac_cv_c_cross=yes
else
cat > conftest.$ac_ext <<EOF
-#line 905 "configure"
+#line 967 "configure"
#include "confdefs.h"
main(){return(0);}
EOF
# On the NeXT, cc -E runs the code through the compiler's parser,
# not just through cpp.
cat > conftest.$ac_ext <<EOF
-#line 947 "configure"
+#line 1009 "configure"
#include "confdefs.h"
#include <assert.h>
Syntax Error
rm -rf conftest*
CPP="${CC-cc} -E -traditional-cpp"
cat > conftest.$ac_ext <<EOF
-#line 961 "configure"
+#line 1023 "configure"
#include "confdefs.h"
#include <assert.h>
Syntax Error
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 994 "configure"
+#line 1056 "configure"
#include "confdefs.h"
#include <$ac_hdr>
EOF
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 1030 "configure"
+#line 1092 "configure"
#include "confdefs.h"
#include <$ac_hdr>
EOF
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 1065 "configure"
+#line 1127 "configure"
#include "confdefs.h"
/* System header to define __stub macros and hopefully few prototypes,
which can conflict with char $ac_func(); below. */
case "${host}" in
-i[345]86-*-msdos* | i[345]86-*-go32* | i[345]86-*-win32)
+i[345]86-*-msdos* | i[345]86-*-go32* | *-*-cygwin32)
cat >> confdefs.h <<\EOF
#define USE_BINARY_FOPEN 1
EOF
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 1124 "configure"
+#line 1186 "configure"
#include "confdefs.h"
#include <stdio.h>
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 1164 "configure"
+#line 1226 "configure"
#include "confdefs.h"
#include <stdio.h>
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 1464 "configure"
+#line 1526 "configure"
#include "confdefs.h"
#include <sys/procfs.h>
int main() { return 0; }
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 1751 "configure"
+#line 1813 "configure"
#include "confdefs.h"
/* System header to define __stub macros and hopefully few prototypes,
which can conflict with char $ac_func(); below. */
ac_cv_func_mmap=no
else
cat > conftest.$ac_ext <<EOF
-#line 1803 "configure"
+#line 1865 "configure"
#include "confdefs.h"
/* Thanks to Mike Haertel and Jim Avera for this test. */
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 1897 "configure"
+#line 1959 "configure"
#include "confdefs.h"
/* System header to define __stub macros and hopefully few prototypes,
which can conflict with char $ac_func(); below. */
s%@RANLIB@%$RANLIB%g
s%@INSTALL_PROGRAM@%$INSTALL_PROGRAM%g
s%@INSTALL_DATA@%$INSTALL_DATA%g
+s%@ALLLIBS@%$ALLLIBS%g
+s%@PICFLAG@%$PICFLAG%g
+s%@SHLIB@%$SHLIB%g
+s%@SHLIB_CC@%$SHLIB_CC%g
+s%@SHLIB_CFLAGS@%$SHLIB_CFLAGS%g
+s%@COMMON_SHLIB@%$COMMON_SHLIB%g
+s%@PICLIST@%$PICLIST%g
+s%@SHLINK@%$SHLINK%g
s%@HOST_64BIT_LONG@%$HOST_64BIT_LONG%g
s%@CC_FOR_BUILD@%$CC_FOR_BUILD%g
s%@CPP@%$CPP%g
# HDEFINES host specific compiler options
# host64 set to true if this is a 64 bit host
# HOST_64BIT_TYPE host 64 bit type
+# SHLIB_CC compiler to use when building shared library
+# SHLIB_CFLAGS flags to use when building shared library
+# PICFLAG may be set to flag to use to compile PIC
+# SHLINK may be set to the name to link the shared library to
+# ALLLIBS may be set to libraries to build
+# HLDFLAGS LDFLAGS specific to the host
HDEFINES=
host64=false
RANLIB=${RANLIB-i386-win32-ranlib}
;;
+mips-dec-netbsd*) ;;
mips-dec-*) HDEFINES="-G 4" ;;
mips-sgi-irix3*) HDEFINES="-G 4"
test -z "$LDFLAGS" && LDFLAGS=-lmalloc
powerpc-*-aix*) HDEFINES=-DHOST_AIX ;;
esac
+
+# If we are configuring with --enable-shared, adjust the shared
+# library support based on the host. This support must work for both
+# the BFD and the opcodes libraries.
+SHLIB_CC='$(CC)'
+SHLIB_CFLAGS='-shared'
+if [ "${shared}" = "true" ]; then
+ case "${host}" in
+ hppa*-*-*) picfrag=../config/mh-papic ;;
+ i[3456]86-*-*) picfrag=../config/mh-x86pic ;;
+ *-*-*) picfrag=../config/mh-${host_cpu}pic ;;
+ esac
+ if [ -f "${picfrag}" ]; then
+ pic=`sed -n -e 's/^PICFLAG[ ]*=[ ]*\(.*\)$/\1/p' ${picfrag}`
+ if [ -n "${pic}" ]; then
+ PICFLAG=${pic}
+ fi
+ fi
+
+ base_shlib=`echo ${SHLIB} | sed -e 's,^.*/\([^/]*\)$,\1,'`
+
+ case "${host}" in
+ *-dec-osf*)
+ # -fpic is not needed on the Alpha.
+ PICFLAG=
+ ;;
+ *-*-hpux*)
+ # HP/UX uses .sl for shared libraries.
+ SHLINK=`echo ${SHLINK} | sed -e 's/so$/sl/'`
+ ;;
+ *-*-irix5*)
+ # -fpic is not needed on Irix 5.
+ PICFLAG=
+ SHLIB_CFLAGS="-shared -Wl,-soname,${base_shlib}"
+ ;;
+ *-*-linux*aout*)
+ ;;
+ *-*-linux*)
+ SHLIB_CFLAGS="-shared -Wl,-soname,${base_shlib}"
+ ;;
+ *-*-sysv4* | *-*-solaris*)
+ SHLIB_CFLAGS="-shared -h ${base_shlib}"
+ ;;
+ *-*-sunos*)
+ ALLLIBS=`echo ${ALLLIBS} | sed -e 's/\$(SHLINK)//'`
+ ;;
+ esac
+fi
+
+# On SunOS, if the linker supports the -rpath option, use it to
+# prevent ../bfd and ../opcodes from being included in the run time
+# search path.
+HLDFLAGS=
+case "${host}" in
+ *-*-sunos*)
+ echo 'main () { }' > conftest.c
+ ${CC} -o conftest -Wl,-rpath= conftest.c >/dev/null 2>conftest.t
+ if grep 'unrecognized' conftest.t >/dev/null 2>&1; then
+ :
+ elif grep 'No such file' conftest.t >/dev/null 2>&1; then
+ :
+ else
+ HLDFLAGS='-Wl,-rpath='
+ fi
+ rm -f conftest.t conftest.c conftest
+ ;;
+esac
no) enable_targets= ;;
*) enable_targets=$enableval ;;
esac])dnl
+AC_ARG_ENABLE(shared,
+[ --enable-shared build shared BFD library],
+[case "${enableval}" in
+ yes) shared=true ;;
+ no) shared=false ;;
+ *) AC_MSG_ERROR([bad value ${enableval} for BFD shared option]) ;;
+esac])dnl
+AC_ARG_ENABLE(commonbfdlib,
+[ --enable-commonbfdlib build shared BFD/opcodes/libiberty library],
+[case "${enableval}" in
+ yes) commonbfdlib=true ;;
+ no) commonbfdlib=false ;;
+ *) AC_MSG_ERROR([bad value ${enableval} for BFD commonbfdlib option]) ;;
+esac])dnl
+AC_ARG_WITH(mmap,
+[ --with-mmap try using mmap for BFD input files if available],
+[case "${withval}" in
+ yes) want_mmap=true ;;
+ no) want_mmap=false ;;
+ *) AC_MSG_ERROR(bad value ${withval} for BFD with-mmap option) ;;
+esac],[want_mmap=false])dnl
AC_CONFIG_HEADER(config.h:config.in)
# host stuff:
+ALLLIBS='$(TARGETLIB)'
+PICFLAG=
+SHLIB=
+SHLINK=
+if test "${shared}" = "true"; then
+ PICFLAG=-fpic
+ if test "${commonbfdlib}" = "true"; then
+ ALLLIBS='$(TARGETLIB)'
+ else
+ ALLLIBS='$(TARGETLIB) $(SHLIB) $(SHLINK)'
+changequote(,)dnl
+ SHLIB=libbfd.so.`sed -e 's/[^0-9]*\([0-9.]*\).*/\1/' ${srcdir}/VERSION`
+changequote([,])dnl
+ SHLINK=libbfd.so
+ fi
+fi
+
# Permit host specific settings.
. ${srcdir}/configure.host
AC_PROG_RANLIB
AC_PROG_INSTALL
+if test "${shared}" = "true"; then
+ if test "${GCC}" != "yes" && test "${shared_non_gcc}" != "yes"; then
+ AC_MSG_WARN([BFD --enable-shared only supported when using gcc])
+ shared=false
+ PICFLAG=
+ SHLIB=
+ fi
+fi
+
+AC_SUBST(ALLLIBS)
+AC_SUBST(PICFLAG)
+AC_SUBST(SHLIB)
+AC_SUBST(SHLIB_CC)
+AC_SUBST(SHLIB_CFLAGS)
+if test "${commonbfdlib}" = "true"; then
+ COMMON_SHLIB=yes
+ PICLIST=piclist
+else
+ COMMON_SHLIB=
+ PICLIST=
+fi
+AC_SUBST(COMMON_SHLIB)
+AC_SUBST(PICLIST)
+AC_SUBST(SHLINK)
+
HOST_64BIT_LONG=0
if test "x${HOST_64BIT_TYPE}" = "xlong"; then
HOST_64BIT_LONG=1
BFD_BINARY_FOPEN
-AC_MSG_CHECKING([whether malloc must be declared])
-AC_CACHE_VAL(bfd_cv_decl_needed_malloc,
-[AC_TRY_COMPILE([
-#include <stdio.h>
-#ifdef HAVE_STDLIB_H
-#include <stdlib.h>
-#endif
-#ifdef HAVE_UNISTD_H
-#include <unistd.h>
-#endif],
-[char *(*pfn) = (char *(*)) malloc],
-bfd_cv_decl_needed_malloc=no, bfd_cv_decl_needed_malloc=yes)])
-AC_MSG_RESULT($bfd_cv_decl_needed_malloc)
-if test $bfd_cv_decl_needed_malloc = yes; then
- AC_DEFINE(NEED_DECLARATION_MALLOC)
-fi
-
-AC_MSG_CHECKING([whether free must be declared])
-AC_CACHE_VAL(bfd_cv_decl_needed_free,
-[AC_TRY_COMPILE([
-#include <stdio.h>
-#ifdef HAVE_STDLIB_H
-#include <stdlib.h>
-#endif
-#ifdef HAVE_UNISTD_H
-#include <unistd.h>
-#endif],
-[int (*pfn) = (int (*)) free],
-bfd_cv_decl_needed_free=no, bfd_cv_decl_needed_free=yes)])
-AC_MSG_RESULT($bfd_cv_decl_needed_free)
-if test $bfd_cv_decl_needed_free = yes; then
- AC_DEFINE(NEED_DECLARATION_FREE)
-fi
+BFD_NEED_DECLARATION(malloc)
+BFD_NEED_DECLARATION(free)
# If we are configured native, pick a core file support file.
COREFILE=
COREFILE=trad-core.o
AC_DEFINE(TRAD_HEADER,"hosts/m68knbsd.h")
;;
+ m68*-apple-aux*)
+ COREFILE=trad-core.o
+ AC_DEFINE(TRAD_HEADER,"hosts/m68kaux.h")
+ ;;
m88*-*-sysv4*) ;;
m88*-motorola-sysv*) COREFILE=ptrace-core.o ;;
m88*-*-mach3*)
hp300hpux_vec) tb="$tb hp300hpux.o aout32.o stab-syms.o" ;;
i386aout_vec) tb="$tb i386aout.o aout32.o stab-syms.o" ;;
i386bsd_vec) tb="$tb i386bsd.o aout32.o stab-syms.o" ;;
- i386dynix_vec) tb="$tb i386dynix.o aout32.o stab-syms.o" ;;
i386coff_vec) tb="$tb coff-i386.o cofflink.o" ;;
+ i386dynix_vec) tb="$tb i386dynix.o aout32.o stab-syms.o" ;;
+ i386freebsd_vec) tb="$tb i386freebsd.o aout32.o stab-syms.o" ;;
i386msdos_vec) tb="$tb i386msdos.o" ;;
i386pe_vec) tb="$tb pe-i386.o cofflink.o " ;;
i386pei_vec) tb="$tb pei-i386.o cofflink.o" ;;
m68klynx_coff_vec) tb="$tb cf-m68klynx.o coff-m68k.o cofflink.o lynx-core.o stab-syms.o" ;;
m68knetbsd_vec) tb="$tb m68knetbsd.o aout32.o stab-syms.o" ;;
m68k4knetbsd_vec) tb="$tb m68k4knetbsd.o aout32.o stab-syms.o" ;;
+ m68kaux_coff_vec) tb="$tb coff-aux.o coff-m68k.o cofflink.o" ;;
m88kbcs_vec) tb="$tb coff-m88k.o" ;;
newsos3_vec) tb="$tb newsos3.o aout32.o stab-syms.o" ;;
nlm32_i386_vec) tb="$tb nlm32-i386.o nlm32.o nlm.o" ;;
dnl AC_CHECK_HEADERS(sys/mman.h)
AC_FUNC_MMAP
AC_CHECK_FUNCS(madvise mprotect)
+case ${want_mmap}+${ac_cv_func_mmap} in
+ true+yes ) AC_DEFINE(USE_MMAP) ;;
+esac
rm -f doc/config.status
AC_OUTPUT(Makefile doc/Makefile,
projects / binutils-gdb.git / commitdiff