menu "Kernel"
choice
prompt "Kernel type"
- default BR2_KERNEL_LINUX
+ default BR2_KERNEL_LINUX_ADVANCED if BR2_TARGET_ATMEL
+ default BR2_KERNEL_LINUX if !BR2_TARGET_ATMEL
config BR2_KERNEL_none
bool "none"
help
Do not build a kernel
+config BR2_KERNEL_LINUX_ADVANCED
+ bool "linux (Advanced configuration)"
+ select BR2_PACKAGE_LINUX
+ help
+ The Linux kernel - Advanced Configuration.
+ http://www.kernel.org/
+
+ Note: Requires kernel-headers >= 2.6.19 since the other
+ kernel headers are just that (headers) and not full
+ kernels. This is a feature.
+
config BR2_KERNEL_LINUX
- bool "linux"
+ bool "linux (Same version as linux headers)"
+ select BR2_PACKAGE_LINUX
help
- Linux kernel
+ The Linux kernel.
+ http://www.kernel.org/
+
+ Note: Requires kernel-headers >= 2.6.19 since the other
+ kernel headers are just that (headers) and not full
+ kernels. This is a feature.
config BR2_KERNEL_HURD
bool "hurd"
help
GNU/Hurd kernel
endchoice
-if BR2_KERNEL_LINUX
+
+config BR2_PACKAGE_LINUX
+ bool
+ default n
+
+if BR2_PACKAGE_LINUX
source "target/linux/Config.in"
+#source "target/linux/Config.in.experimental"
+source "target/linux/Config.in.advanced"
endif
+
if BR2_KERNEL_HURD
source "target/hurd/Config.in"
endif
# We already did add the kernel target to TARGETS and now just pull in the rules
# to actually build this target.
-#ifeq ($(strip $(subst ",,$(BR2_PACKAGE_LINUX_EXPERIMENTAL_CONFIG))),y)
+ifeq ($(strip $(subst ",,$(BR2_KERNEL_LINUX))),y)
#"))
-#include target/linux/Makefile.in
-##include target/linux-experimental/Makefile.in
-#else
include target/linux/Makefile.in
-#endif
+endif
+
+ifeq ($(strip $(subst ",,$(BR2_KERNEL_LINUX_ADVANCED))),y)
+#"))
+include target/linux/Makefile.in.advanced
+endif
+
include target/hurd/Makefile.in
LINUX26_COPYTO:=/tftpboot
ifeq ($(DEFAULT_KERNEL_HEADERS),2.6.22.1)
-KERNEL_HEADERS_PATCH_DIR:=target/device/Atmel/linux/kernel-patches-$(DOWNLOAD_LINUX26_VERSION)
+KERNEL_HEADERS_PATCH_DIR:=target/device/Atmel/linux/kernel-patches-$(LINUX26_VERSION)
else
# Patch during kernel header build
ifeq ($(BR2_avr32),y)
-KERNEL_HEADERS_PATCH_DIR:=target/device/Atmel/arch-avr32/kernel-patches-$(DOWNLOAD_LINUX26_VERSION)
+KERNEL_HEADERS_PATCH_DIR:=target/device/Atmel/arch-avr32/kernel-patches-$(LINUX26_VERSION)
endif
# Patch during kernel build
ifeq ($(BR2_arm),y)
-#LINUX26_PATCH_DIR:=target/device/Atmel/arch-at91/kernel-patches-$(DOWNLOAD_LINUX26_VERSION)
-KERNEL_HEADERS_PATCH_DIR:=target/device/Atmel/arch-arm/kernel-patches-$(DOWNLOAD_LINUX26_VERSION)
+KERNEL_HEADERS_PATCH_DIR:=target/device/Atmel/arch-arm/kernel-patches-$(LINUX26_VERSION)
endif
endif
BR2_PACKAGE_BUSYBOX_CONFIG:=$(BR2_BOARD_PATH)/busybox-$(BR2_BUSYBOX_VERSION).config
-LINUX26_KERNEL=$(BINARIES_DIR)/$(PROJECT)-linux-$(LINUX26_VERSION)
+LINUX26_KERNEL=$(BINARIES_DIR)/$(PROJECT)-linux-$(LINUX26_VERSION)-$(DATE)
# Update things in board specific makefiles
include target/device/Atmel/*/Makefile.in
include $(ATMEL_PATH)/at91bootstrap/at91bootstrap.mk
endif
-atmel_status:
- @echo PROJECT_BUILD_DIR=$(PROJECT_BUILD_DIR)
- @echo BOARD_NAME=$(BOARD_NAME)
- @echo BR2_BOARD_PATH=$(BR2_BOARD_PATH)
- @echo BR2_MAJOR_MINOR=$(BR2_LINUX_MAJOR_VERSION)$(BR2_LINUX_MINOR_VERSION)
- @echo MAJOR_MINOR=$(LINUX_MAJOR_VER)$(LINUX_MINOR_VER)
- @echo DOWNLOAD_LINUX26_VERSION=$(DOWNLOAD_LINUX26_VERSION)
- @echo LINUX_SOURCE=$(LINUX_SOURCE)
- @echo TARGETS=$(TARGETS)
- @echo LINUX26_HEADERS_PATCH_DIR=$(LINUX26_HEADERS_PATCH_DIR)
- @echo LINUX26_BINLOC=$(LINUX26_BINLOC)
- @echo LINUX26_FORMAT=$(LINUX26_FORMAT)
- @echo LINUX26_KERNEL=$(LINUX26_KERNEL)
-
-#TARGETS+=atmel_status
endif
#
# Automatically generated make config: don't edit
-# Sat Jul 14 15:27:09 2007
+# Sat Oct 13 17:46:13 2007
#
BR2_HAVE_DOT_CONFIG=y
-
-#
-# Project Options
-#
-BR2_PROJECT="at91sam9260dfc"
-BR2_HOSTNAME="at91sam9260dfc"
-BR2_BANNER="Welcome to the Erik's uClibc development environment running on the AT91SAM9260EK"
+BR2_VERSION="0.10.0-svn"
# BR2_alpha is not set
BR2_arm=y
# BR2_armeb is not set
# BR2_sh is not set
# BR2_sh64 is not set
# BR2_sparc is not set
+# BR2_sparc64 is not set
# BR2_x86_64 is not set
BR2_generic_arm=y
+# BR2_arm7tdmi is not set
# BR2_arm610 is not set
# BR2_arm710 is not set
# BR2_arm720t is not set
# BR2_arm920t is not set
# BR2_arm922t is not set
# BR2_arm926t is not set
+# BR2_arm10t is not set
# BR2_arm1136jf_s is not set
# BR2_arm1176jz_s is not set
# BR2_arm1176jzf_s is not set
# BR2_xscale is not set
# BR2_iwmmxt is not set
BR2_ARM_TYPE="GENERIC_ARM"
-BR2_ARM_OABI=y
-# BR2_ARM_EABI is not set
+# BR2_ARM_OABI is not set
+BR2_ARM_EABI=y
BR2_ARCH="arm"
BR2_ENDIAN="LITTLE"
+#
+# Target options
+#
+
+#
+# Project Options
+#
+BR2_PROJECT="at91sam9260dfc"
+BR2_HOSTNAME="at91sam9260dfc"
+BR2_BANNER="Welcome to the Erik's uClibc development environment running on the AT91SAM9260EK"
+
+#
+# Preset Devices
+#
+# BR2_TARGET_ARM is not set
+BR2_TARGET_ATMEL=y
+
+#
+# Atmel AT91 Specific Device Support
+#
+BR2_TARGET_AT91=y
+# BR2_TARGET_AT91RM9200 is not set
+BR2_TARGET_AT91SAM9260=y
+# BR2_TARGET_AT91SAM9260A is not set
+# BR2_TARGET_AT91SAM9261 is not set
+# BR2_TARGET_AT91SAM9261S is not set
+# BR2_TARGET_AT91SAM9262 is not set
+# BR2_TARGET_AT91SAM9263 is not set
+# BR2_TARGET_AT91SAM9XE is not set
+# BR2_TARGET_AT91RM9200DF is not set
+# BR2_TARGET_AT91RM9200SE is not set
+# BR2_TARGET_AT91RM9200EK is not set
+# BR2_TARGET_AT91RM9200DK is not set
+BR2_TARGET_AT91SAM9260DFC=y
+# BR2_TARGET_AT91SAM9260EK is not set
+# BR2_TARGET_AT91SAM9260PF is not set
+# BR2_TARGET_AT91SAM9261EK is not set
+# BR2_TARGET_AT91SAM9262EK is not set
+# BR2_TARGET_AT91SAM9263EK is not set
+# BR2_TARGET_AT91SAM9XEEK is not set
+BR2_BOARD_NAME="at91sam9260dfc"
+BR2_TARGET_AT91_ADVANCED_INFO=y
+
+#
+# Package support
+#
+
+#
+# Secondary locations
+#
+BR2_AT91_LINUXPATCH_SITE="http://maxim.org.za/AT91RM9200/2.6"
+BR2_TARGET_ATMEL_COPYTO="/tftpboot"
+BR2_BOARD_PATH="target/device/Atmel/$(BR2_BOARD_NAME)"
+BR2_TARGET_UBOOT=y
+BR2_TARGET_UBOOT_SERVERIP="10.175.196.221"
+BR2_TARGET_UBOOT_IPADDR="10.175.196.18"
+BR2_TARGET_UBOOT_GATEWAY="10.175.196.1"
+BR2_TARGET_UBOOT_NETMASK="255.255.255.0"
+BR2_TARGET_UBOOT_ETHADDR="04:25:fe:ed:00:18"
+BR2_TARGET_AT91BOOTSTRAP=y
+# BR2_TARGET_AT91BOOT_DATAFLASH is not set
+BR2_TARGET_AT91BOOT_DATAFLASHCARD=y
+# BR2_TARGET_AT91BOOT_NANDFLASH is not set
+# BR2_TARGET_AT91BOOT_FLASH is not set
+BR2_TARGET_AT91BOOTSTRAP_MEMORY="dataflashcard"
+BR2_AT91BOOTSTRAP_IMG_SIZE="0x32000"
+BR2_AT91BOOTSTRAP_JUMP_TO_DEFAULT=y
+# BR2_AT91BOOTSTRAP_JUMP_TO_HIGH_SDRAM is not set
+# BR2_AT91BOOTSTRAP_JUMP_TO_START_OF_SDRAM is not set
+BR2_AT91BOOTSTRAP_JUMP_ADDR="0x23F00000"
+
+#
+# It will be copied to $(BR2_AT91BOOTSTRAP_JUMP_ADDR)
+#
+# BR2_TARGET_SHARP is not set
+
+#
+# Generic System Support
+#
+# BR2_TARGET_GENERIC_ACCESS_POINT is not set
+# BR2_TARGET_GENERIC_FIREWALL is not set
+# BR2_TARGET_GENERIC_DEV_SYSTEM is not set
+
#
# Build options
#
BR2_WGET="wget --passive-ftp -nd"
-BR2_SVN="svn co"
+BR2_SVN_CO="svn co"
+BR2_SVN_UP="svn up"
+BR2_GIT="git clone"
BR2_ZCAT="gzip -d -c"
BR2_BZCAT="bzcat"
BR2_TAR_OPTIONS=""
BR2_DL_DIR="/usr/local/install/downloads"
+
+#
+# Mirrors and Download locations
+#
BR2_SOURCEFORGE_MIRROR="easynews"
+
+#
+# Atmel Mirrors
+#
BR2_ATMEL_MIRROR="ftp://at91dist:distrib@81.80.104.162/AT91_Third_Party_Design_Flow/Linux_Host/"
BR2_AT91_PATCH_MIRROR="http://maxim.org.za/AT91RM9200/2.6/"
-BR2_STAGING_DIR="/usr/local/arm/gcc-4.2.0-uclibc-20070714"
+BR2_STAGING_DIR="$(BUILD_DIR)/staging_dir"
BR2_TOPDIR_PREFIX=""
BR2_TOPDIR_SUFFIX=""
+BR2_ROOTFS_PREFIX="rootfs"
+BR2_ROOTFS_SUFFIX="$(DATE)"
BR2_GNU_BUILD_SUFFIX="pc-linux-gnu"
BR2_GNU_TARGET_SUFFIX="linux-uclibc"
BR2_JLEVEL=2
# BR2_PREFER_IMA is not set
# BR2_DEPRECATED is not set
+BR2_RECENT=y
+BR2_STRIP_strip=y
+# BR2_STRIP_sstrip is not set
+# BR2_STRIP_none is not set
# BR2_PREFER_STATIC_LIB is not set
-BR2_TOOLCHAIN_BUILDROOT=y
-# BR2_TOOLCHAIN_EXTERNAL is not set
+# BR2_HAVE_MANPAGES is not set
+# BR2_HAVE_INFOPAGES is not set
+BR2_UPDATE_CONFIG=y
#
-# Toolchain Options
+# Toolchain
#
+BR2_TOOLCHAIN_BUILDROOT=y
+# BR2_TOOLCHAIN_EXTERNAL is not set
+# BR2_TOOLCHAIN_EXTERNAL_SOURCE is not set
+BR2_TOOLCHAIN_SOURCE=y
+BR2_EXT_GCC_VERSION_4_1_2=y
+BR2_EXT_GCC_VERSION_4_2_1=y
+BR2_EXT_BINUTILS_VERSION_2_17=y
+BR2_EXT_UCLIBC_VERSION_0_9_29=y
+BR2_EXT_UCLIBC_VERSION_0_9_28_3=y
#
# Kernel Header Options
# BR2_KERNEL_HEADERS_2_6_9 is not set
# BR2_KERNEL_HEADERS_2_6_11 is not set
# BR2_KERNEL_HEADERS_2_6_12 is not set
-# BR2_KERNEL_HEADERS_2_6_19_2 is not set
+# BR2_KERNEL_HEADERS_2_6_20_4 is not set
# BR2_KERNEL_HEADERS_2_6_20 is not set
-BR2_KERNEL_HEADERS_2_6_21=y
-BR2_DEFAULT_KERNEL_HEADERS="2.6.21.5"
+# BR2_KERNEL_HEADERS_2_6_21_5 is not set
+# BR2_KERNEL_HEADERS_2_6_21 is not set
+BR2_KERNEL_HEADERS_2_6_22_1=y
+# BR2_KERNEL_HEADERS_2_6_22_10 is not set
+# BR2_KERNEL_HEADERS_2_6_22 is not set
+# BR2_KERNEL_HEADERS_2_6_23 is not set
+# BR2_KERNEL_HEADERS_SNAP is not set
+# BR2_KERNEL_HEADERS_IPMI is not set
+# BR2_KERNEL_HEADERS_LZMA is not set
+# BR2_KERNEL_HEADERS_RT is not set
+BR2_KERNEL_HEADERS_PATCH_DIR=y
+BR2_DEFAULT_KERNEL_HEADERS="2.6.22.1"
#
# uClibc Options
#
-# BR2_UCLIBC_VERSION_0_9_28 is not set
# BR2_UCLIBC_VERSION_0_9_28_3 is not set
BR2_UCLIBC_VERSION_0_9_29=y
# BR2_UCLIBC_VERSION_SNAPSHOT is not set
BR2_PTHREADS_OLD=y
# BR2_PTHREADS_NATIVE is not set
# BR2_PTHREAD_DEBUG is not set
+BR2_UCLIBC_PROGRAM_INVOCATION=y
#
# Binutils Options
#
-# BR2_BINUTILS_VERSION_2_14_90_0_8 is not set
-# BR2_BINUTILS_VERSION_2_15 is not set
-# BR2_BINUTILS_VERSION_2_15_94_0_2_2 is not set
-# BR2_BINUTILS_VERSION_2_16_1 is not set
-# BR2_BINUTILS_VERSION_2_16_90_0_3 is not set
-# BR2_BINUTILS_VERSION_2_16_91_0_5 is not set
-# BR2_BINUTILS_VERSION_2_16_91_0_6 is not set
-# BR2_BINUTILS_VERSION_2_16_91_0_7 is not set
-BR2_BINUTILS_VERSION_2_17=y
-# BR2_BINUTILS_VERSION_2_17_50_0_2 is not set
-# BR2_BINUTILS_VERSION_2_17_50_0_3 is not set
-# BR2_BINUTILS_VERSION_2_17_50_0_4 is not set
-# BR2_BINUTILS_VERSION_2_17_50_0_5 is not set
-# BR2_BINUTILS_VERSION_2_17_50_0_6 is not set
-# BR2_BINUTILS_VERSION_2_17_50_0_7 is not set
-# BR2_BINUTILS_VERSION_2_17_50_0_8 is not set
-# BR2_BINUTILS_VERSION_2_17_50_0_9 is not set
-# BR2_BINUTILS_VERSION_2_17_50_0_10 is not set
-# BR2_BINUTILS_VERSION_2_17_50_0_12 is not set
-# BR2_BINUTILS_VERSION_2_17_50_0_14 is not set
-# BR2_BINUTILS_VERSION_2_17_50_0_16 is not set
+# BR2_BINUTILS_VERSION_2_17 is not set
# BR2_BINUTILS_VERSION_2_17_50_0_17 is not set
-BR2_BINUTILS_VERSION="2.17"
+BR2_BINUTILS_VERSION_2_18=y
+# BR2_BINUTILS_VERSION_2_18_50_0_1 is not set
+BR2_BINUTILS_VERSION="2.18"
BR2_EXTRA_BINUTILS_CONFIG_OPTIONS=""
#
-# Gcc Options
+# GCC Options
#
-# BR2_GCC_VERSION_3_3_5 is not set
-# BR2_GCC_VERSION_3_3_6 is not set
-# BR2_GCC_VERSION_3_4_2 is not set
-# BR2_GCC_VERSION_3_4_3 is not set
-# BR2_GCC_VERSION_3_4_4 is not set
-# BR2_GCC_VERSION_3_4_5 is not set
# BR2_GCC_VERSION_3_4_6 is not set
-# BR2_GCC_VERSION_4_0_0 is not set
-# BR2_GCC_VERSION_4_0_1 is not set
-# BR2_GCC_VERSION_4_0_2 is not set
-# BR2_GCC_VERSION_4_0_3 is not set
# BR2_GCC_VERSION_4_0_4 is not set
-# BR2_GCC_VERSION_4_1_0 is not set
-# BR2_GCC_VERSION_4_1_1 is not set
# BR2_GCC_VERSION_4_1_2 is not set
-BR2_GCC_VERSION_4_2_0=y
+# BR2_GCC_VERSION_4_2_0 is not set
+BR2_GCC_VERSION_4_2_1=y
# BR2_GCC_IS_SNAP is not set
-BR2_GCC_VERSION="4.2.0"
+BR2_GCC_SUPPORTS_SYSROOT=y
+# BR2_GCC_SUPPORTS_FINEGRAINEDMTUNE is not set
+BR2_GCC_VERSION="4.2.1"
BR2_TOOLCHAIN_SYSROOT=y
# BR2_GCC_USE_SJLJ_EXCEPTIONS is not set
BR2_EXTRA_GCC_CONFIG_OPTIONS=""
-# BR2_INSTALL_LIBSTDCPP is not set
+BR2_GCC_CROSS_CXX=y
+# BR2_GCC_CROSS_FORTRAN is not set
+BR2_INSTALL_LIBSTDCPP=y
+# BR2_INSTALL_LIBGCJ is not set
# BR2_INSTALL_OBJC is not set
# BR2_INSTALL_FORTRAN is not set
BR2_GCC_SHARED_LIBGCC=y
BR2_LARGEFILE=y
# BR2_INET_IPV6 is not set
# BR2_INET_RPC is not set
+BR2_USE_WCHAR=y
# BR2_SOFT_FLOAT is not set
BR2_TARGET_OPTIMIZATION="-Os -pipe"
BR2_CROSS_TOOLCHAIN_TARGET_UTILS=y
#
# Package Selection for the target
#
-
-#
-# The default minimal system
-#
BR2_PACKAGE_BUSYBOX=y
-# BR2_BUSYBOX_VERSION_1_0_1 is not set
-# BR2_BUSYBOX_VERSION_1_1_3 is not set
# BR2_BUSYBOX_VERSION_1_2_2_1 is not set
-# BR2_BUSYBOX_VERSION_1_4_0 is not set
-# BR2_BUSYBOX_VERSION_1_4_1 is not set
-# BR2_BUSYBOX_VERSION_1_4_2 is not set
-# BR2_BUSYBOX_VERSION_1_5_0 is not set
-# BR2_BUSYBOX_VERSION_1_5_1 is not set
-# BR2_BUSYBOX_VERSION_1_6_0 is not set
-BR2_BUSYBOX_VERSION_1_6_1=y
+# BR2_BUSYBOX_VERSION_1_6_1 is not set
+# BR2_BUSYBOX_VERSION_1_7_0 is not set
+# BR2_BUSYBOX_VERSION_1_7_1 is not set
+BR2_BUSYBOX_VERSION_1_7_2=y
# BR2_PACKAGE_BUSYBOX_SNAPSHOT is not set
-BR2_BUSYBOX_VERSION="1.6.1"
+BR2_BUSYBOX_VERSION="1.7.2"
BR2_PACKAGE_BUSYBOX_INSTALL_SYMLINKS=y
BR2_PACKAGE_BUSYBOX_CONFIG="package/busybox/busybox-1.6.0.config"
# BR2_PACKAGE_BUSYBOX_HIDE_OTHERS is not set
# BR2_PACKAGE_FLEX is not set
# BR2_PACKAGE_GAWK is not set
# BR2_PACKAGE_GCC_TARGET is not set
-BR2_EXTRA_TARGET_GCC_CONFIG_OPTIONS=""
# BR2_PACKAGE_GREP is not set
# BR2_PACKAGE_MAKE is not set
# BR2_PACKAGE_PATCH is not set
# BR2_PACKAGE_LIBMPFR is not set
# BR2_PACKAGE_LIBTOOL is not set
# BR2_PACKAGE_M4 is not set
-# BR2_PACKAGE_MPATROL is not set
# BR2_PACKAGE_PKGCONFIG is not set
# BR2_READLINE is not set
# BR2_PACKAGE_XERCES is not set
# BR2_PACKAGE_FILE is not set
# BR2_PACKAGE_KEXEC is not set
# BR2_PACKAGE_LESS is not set
+BR2_PACKAGE_LIBDAEMON=y
# BR2_PACKAGE_LIBELF is not set
# BR2_PACKAGE_LIBEVENT is not set
# BR2_PACKAGE_LIBFLOAT is not set
+# BR2_PACKAGE_LIBGCRYPT is not set
+# BR2_PACKAGE_LIBGPG_ERROR is not set
# BR2_PACKAGE_LIBLOCKFILE is not set
# BR2_PACKAGE_LIBSYSFS is not set
+# BR2_PACKAGE_LIBXML2 is not set
# BR2_PACKAGE_LOCKFILE_PROGS is not set
# BR2_PACKAGE_LSOF is not set
# BR2_PACKAGE_LTP-TESTSUITE is not set
+# BR2_PACKAGE_LTRACE is not set
# BR2_PACKAGE_LTT is not set
-# BR2_PACKAGE_MICROCOM is not set
# BR2_PACKAGE_MODULE_INIT_TOOLS is not set
# BR2_PACKAGE_MODUTILS is not set
# BR2_PACKAGE_NANO is not set
# BR2_PACKAGE_UTIL-LINUX is not set
# BR2_PACKAGE_WHICH is not set
BR2_NETWORK_SUPPORT=y
+
+#
+# Networking applications
+#
# BR2_PACKAGE_ARGUS is not set
# BR2_PACKAGE_AVAHI is not set
# BR2_PACKAGE_BOA is not set
# BR2_PACKAGE_DROPBEAR is not set
# BR2_PACKAGE_ETHTOOL is not set
# BR2_PACKAGE_HASERL is not set
-# BR2_PACKAGE_HOSTAP is not set
+# BR2_PACKAGE_IRDA_UTILS is not set
# BR2_PACKAGE_IPERF is not set
# BR2_PACKAGE_IPROUTE2 is not set
# BR2_PACKAGE_IPSEC_TOOLS is not set
# BR2_PACKAGE_LIBCGI is not set
# BR2_PACKAGE_LIBCGICC is not set
# BR2_PACKAGE_LIBPCAP is not set
-# BR2_PACKAGE_LIGHTTPD is not set
# BR2_PACKAGE_LINKS is not set
# BR2_PACKAGE_LRZSZ is not set
+# BR2_PACKAGE_MDNSRESPONDER is not set
+# BR2_PACKAGE_MICROCOM is not set
# BR2_PACKAGE_MROUTED is not set
+# BR2_PACKAGE_MUTT is not set
# BR2_PACKAGE_NBD is not set
# BR2_PACKAGE_NCFTP is not set
# BR2_PACKAGE_NETCAT is not set
# BR2_PACKAGE_NETSNMP is not set
# BR2_PACKAGE_NFS_UTILS is not set
# BR2_PACKAGE_NTP is not set
+# BR2_PACKAGE_OLSR is not set
# BR2_PACKAGE_OPENNTPD is not set
# BR2_PACKAGE_OPENSSH is not set
# BR2_PACKAGE_OPENSSL is not set
# BR2_PACKAGE_OPENSWAN is not set
# BR2_PACKAGE_PORTMAP is not set
# BR2_PACKAGE_PPPD is not set
+# BR2_PACKAGE_RP_PPPOE is not set
+# BR2_PACKAGE_PPTP_LINUX is not set
# BR2_PACKAGE_PROFTPD is not set
# BR2_PACKAGE_QUAGGA is not set
# BR2_PACKAGE_SOCAT is not set
# BR2_PACKAGE_STUNNEL is not set
# BR2_PACKAGE_TCPDUMP is not set
+# BR2_PACKAGE_DHCPDUMP is not set
# BR2_PACKAGE_TFTPD is not set
+# BR2_PACKAGE_LIGHTTPD is not set
# BR2_PACKAGE_THTTPD is not set
+# BR2_PACKAGE_TINYHTTPD is not set
# BR2_PACKAGE_TN5250 is not set
# BR2_PACKAGE_TTCP is not set
+# BR2_PACKAGE_VPNC is not set
# BR2_PACKAGE_VTUN is not set
# BR2_PACKAGE_WGET is not set
# BR2_PACKAGE_WIRELESS_TOOLS is not set
# BR2_PACKAGE_DM is not set
# BR2_PACKAGE_DMRAID is not set
# BR2_PACKAGE_E2FSPROGS is not set
+# BR2_PACKAGE_GADGETFS_TEST is not set
# BR2_PACKAGE_HAL is not set
# BR2_PACKAGE_HDPARM is not set
# BR2_PACKAGE_HOTPLUG is not set
# BR2_PACKAGE_HWDATA is not set
# BR2_PACKAGE_IOSTAT is not set
+# BR2_PACKAGE_LIBAIO is not set
# BR2_PACKAGE_LIBRAW1394 is not set
# BR2_PACKAGE_LIBUSB is not set
+# BR2_PACKAGE_LM_SENSORS is not set
# BR2_PACKAGE_LVM2 is not set
# BR2_PACKAGE_MDADM is not set
# BR2_PACKAGE_MEMTESTER is not set
# BR2_PACKAGE_MKDOSFS is not set
BR2_PACKAGE_MTD=y
-BR2_PACKAGE_MTD_EXPERIMENTAL=y
-BR2_PACKAGE_MTD_ORIG_STRING="mtd_20060107.orig.tar.gz"
+# BR2_PACKAGE_MTD_UTILS is not set
+BR2_PACKAGE_MTD_20061007=y
+# BR2_PACKAGE_MTD_20050122 is not set
+# BR2_PACKAGE_MTD_SNAPSHOT is not set
#
# MTD tools selection
# BR2_PACKAGE_WIPE is not set
# BR2_PACKAGE_XFSPROGS is not set
BR2_AUDIO_SUPPORT=y
+# BR2_PACKAGE_ALSA_LIB is not set
# BR2_PACKAGE_ASTERISK is not set
# BR2_PACKAGE_AUMIX is not set
-# BR2_PACKAGE_LIBID3TAG is not set
# BR2_PACKAGE_LIBMAD is not set
# BR2_PACKAGE_LIBSNDFILE is not set
+# BR2_PACKAGE_LIBVORBIS is not set
# BR2_PACKAGE_MADPLAY is not set
# BR2_PACKAGE_MPG123 is not set
BR2_GRAPHIC_SUPPORT=y
# graphic libraries
#
# BR2_PACKAGE_DIRECTFB is not set
+# BR2_PACKAGE_IMAGEMAGICK is not set
# BR2_PACKAGE_JPEG is not set
# BR2_PACKAGE_LIBPNG is not set
+# BR2_PACKAGE_LIBUNGIF is not set
# BR2_PACKAGE_SDL is not set
# BR2_PACKAGE_TIFF is not set
#
-# other GUIs
+# busybox graphic applications
#
-# BR2_PACKAGE_QTE is not set
-# BR2_PACKAGE_QTOPIA4 is not set
#
-# X Window System server
+# --> (May be broken in busybox)
#
-# BR2_PACKAGE_XORG is not set
-# BR2_PACKAGE_TINYX is not set
+# BR2_PACKAGE_FBV is not set
+# BR2_PACKAGE_FBSET is not set
+
+#
+# other GUIs
+#
+# BR2_PACKAGE_QTE is not set
+# BR2_PACKAGE_QTOPIA4 is not set
+BR2_PACKAGE_XSERVER_none=y
+# BR2_PACKAGE_XSERVER_x11r7 is not set
+# BR2_PACKAGE_XSERVER_xorg is not set
+# BR2_PACKAGE_XSERVER_tinyx is not set
+BR2_X11_PREFIX="/usr"
#
# X libraries and helper libraries
#
# BR2_PACKAGE_ATK is not set
-# BR2_PACKAGE_CAIRO is not set
# BR2_PACKAGE_PANGO is not set
+# BR2_PACKAGE_LIBDRM is not set
# BR2_PACKAGE_LIBGLIB12 is not set
# BR2_PACKAGE_LIBGLIB2 is not set
-# BR2_PACKAGE_LIBGTK12 is not set
-# BR2_PACKAGE_LIBGTK2 is not set
# BR2_PACKAGE_FONTCONFIG is not set
# BR2_PACKAGE_FREETYPE is not set
+# BR2_PACKAGE_TSLIB is not set
#
# X Window managers
#
-# BR2_PACKAGE_METACITY is not set
+# BR2_PACKAGE_MATCHBOX is not set
#
# X applications
#
-# BR2_PACKAGE_DILLO is not set
-# BR2_PACKAGE_RDESKTOP is not set
-# BR2_PACKAGE_RXVT is not set
+
+#
+# Video libraries/codecs and applications
+#
+# BR2_PACKAGE_MPLAYER is not set
BR2_COMPRESSOR_SUPPORT=y
# BR2_PACKAGE_GZIP is not set
# BR2_PACKAGE_LZO is not set
# BR2_PACKAGE_PYTHON is not set
# BR2_PACKAGE_RUBY is not set
# BR2_PACKAGE_TCL is not set
+# BR2_PACKAGE_PHP is not set
#
-# Target Options
+# Target filesystem options
#
#
#
#
-# Linux Options
+# Kernel
#
+# BR2_KERNEL_none is not set
+BR2_KERNEL_LINUX_ADVANCED=y
+# BR2_KERNEL_LINUX is not set
+# BR2_KERNEL_HURD is not set
BR2_PACKAGE_LINUX=y
-BR2_PACKAGE_LINUX_EXPERIMENTAL_CONFIG=y
+BR2_PACKAGE_LINUX_USE_KCONFIG=y
BR2_PACKAGE_LINUX_KCONFIG="$(BR2_BOARD_PATH)/$(BR2_BOARD_NAME)-linux-$(LINUX26_VERSION).config"
-# BR2_LINUX_2_6_SNAP is not set
-# BR2_LINUX_2_6_MM is not set
+BR2_PACKAGE_LINUX_FORMAT="uImage"
+BR2_KERNEL_CURRENT_VERSION="2.6.22"
+BR2_KERNEL_SITE="http://ftp.kernel.org/pub/linux/kernel/v2.6/"
# BR2_LINUX_2_6_STABLE is not set
-# BR2_LINUX_2_6_22_1 is not set
+# BR2_LINUX_2_6_23 is not set
+# BR2_LINUX_2_6_22_10 is not set
+BR2_LINUX_2_6_22_1=y
# BR2_LINUX_2_6_22 is not set
-# BR2_LINUX_2_6_21_6 is not set
-# BR2_LINUX_2_6_21_1 is not set
+# BR2_LINUX_2_6_21_7 is not set
+# BR2_LINUX_2_6_21_5 is not set
# BR2_LINUX_2_6_21 is not set
-BR2_LINUX_2_6_20_4=y
# BR2_LINUX_2_6_20 is not set
-# BR2_LINUX_2_6_19_2 is not set
-# BR2_LINUX_2_6_19 is not set
-# BR2_LINUX_2_6_18 is not set
-# BR2_LINUX_2_6_17 is not set
-# BR2_LINUX_2_6_16 is not set
-# BR2_LINUX_2_6_15 is not set
-# BR2_LINUX_2_6_23 is not set
-# BR2_LINUX_CUSTOM is not set
+# BR2_LINUX26_CUSTOM is not set
#
# Patches
#
BR2_LINUX_BSP_PATCH="linux-2.6.20.4-atmel.patch.bz2"
-BR2_DOWNLOAD_LINUX26_VERSION="2.6.20.4"
-BR2_LINUX26_VERSION="2.6.20.4"
-BR2_LINUX26_RC_PATCH=""
-BR2_PACKAGE_LINUX_USE_KCONFIG=y
-# BR2_LINUX26_DEFCONFIG is not set
-# BR2_LINUX_CUSTOMIZE is not set
+BR2_KERNEL_PREPATCHED=y
+# BR2_KERNEL_BASE is not set
+# BR2_KERNEL_LATEST is not set
+BR2_DOWNLOAD_LINUX26_VERSION="2.6.22.1"
+BR2_LINUX26_VERSION="2.6.22.1"
+
+#
+# Linux Kernel Configuration
+#
+# BR2_PACKAGE_LINUX_USE_DEFCONFIG is not set
+# BR2_PACKAGE_LINUX_USE_XCONFIG is not set
# BR2_LINUX_BIN_BZIMAGE is not set
-# BR2_LINUX_BIN_ZIMAGE is not set
-# BR2_LINUX_BIN_VMLINUX is not set
BR2_LINUX_BIN_UIMAGE=y
+# BR2_LINUX_BIN_VMLINUX is not set
+# BR2_LINUX_BIN_ZIMAGE is not set
# BR2_LINUX_BIN_CUSTOM is not set
-BR2_LINUX26_FORMAT="uImage"
#
# Destinations for linux kernel binaries
#
-# BR2_LINUX_IN_ROOTFS is not set
-BR2_LINUX_COPY=y
+# BR2_LINUX_COPYTO_ROOTFS is not set
+BR2_LINUX_COPYTO_TFTPBOOT=y
BR2_LINUX_COPYTO="/tftpboot"
-
-#
-# Board Support Options
-#
-# BR2_TARGET_ARM is not set
-BR2_TARGET_ATMEL=y
-
-#
-# Atmel AT91 Specific Device Support
-#
-BR2_TARGET_AT91=y
-# BR2_TARGET_AT91RM9200 is not set
-BR2_TARGET_AT91SAM9260=y
-# BR2_TARGET_AT91SAM9260A is not set
-# BR2_TARGET_AT91SAM9261 is not set
-# BR2_TARGET_AT91SAM9261S is not set
-# BR2_TARGET_AT91SAM9262 is not set
-# BR2_TARGET_AT91SAM9263 is not set
-# BR2_TARGET_AT91SAM9XE is not set
-# BR2_TARGET_AT91RM9200DF is not set
-# BR2_TARGET_AT91RM9200SE is not set
-# BR2_TARGET_AT91RM9200EK is not set
-# BR2_TARGET_AT91RM9200DK is not set
-BR2_TARGET_AT91SAM9260DFC=y
-# BR2_TARGET_AT91SAM9260EK is not set
-# BR2_TARGET_AT91SAM9261EK is not set
-# BR2_TARGET_AT91SAM9262EK is not set
-# BR2_TARGET_AT91SAM9263EK is not set
-# BR2_TARGET_AT91SAM9XEEK is not set
-BR2_BOARD_NAME="at91sam9260dfc"
-BR2_TARGET_AT91_ADVANCED_INFO=y
-
-#
-# Package support
-#
-
-#
-# Secondary locations
-#
-BR2_AT91_LINUXPATCH_SITE="http://maxim.org.za/AT91RM9200/2.6"
-BR2_TARGET_ATMEL_COPYTO="/tftpboot"
-BR2_BOARD_PATH="target/device/Atmel/$(BR2_BOARD_NAME)"
-BR2_TARGET_UBOOT=y
-BR2_TARGET_UBOOT_SERVERIP="10.175.196.221"
-BR2_TARGET_UBOOT_IPADDR="10.175.196.18"
-BR2_TARGET_UBOOT_GATEWAY="10.175.196.1"
-BR2_TARGET_UBOOT_NETMASK="255.255.255.0"
-BR2_TARGET_UBOOT_ETHADDR="04:25:fe:ed:00:18"
-BR2_TARGET_AT91BOOTSTRAP=y
-# BR2_TARGET_AT91BOOT_DATAFLASH is not set
-BR2_TARGET_AT91BOOT_DATAFLASHCARD=y
-# BR2_TARGET_AT91BOOT_NANDFLASH is not set
-# BR2_TARGET_AT91BOOT_FLASH is not set
-BR2_TARGET_AT91BOOTSTRAP_MEMORY="dataflashcard"
-# BR2_TARGET_SHARP is not set
-
-#
-# Generic System Support
-#
-# BR2_TARGET_GENERIC_ACCESS_POINT is not set
-# BR2_TARGET_GENERIC_FIREWALL is not set
-# BR2_TARGET_GENERIC_DEV_SYSTEM is not set
+BR2_LINUX_COPY_CONFIGURATION=y
+++ /dev/null
-#############################################################
-#
-# Linux kernel 2.6 target
-#
-#############################################################
-ifneq ($(filter $(TARGETS),linux26),)
-
-
-ifeq ($(LINUX_HEADERS_VERSION),)
-# Version of Linux to download and then apply patches to
-# XXX: andersee, i do not understand why we need this (BF)
-DOWNLOAD_LINUX26_VERSION:=$(strip $(subst ",, $(BR2_DOWNLOAD_LINUX26_VERSION)))
-# "))
-LINUX26_VERSION:=$(strip $(subst ",, $(BR2_LINUX26_VERSION)))
-# "))
-LINUX26_RC_PATCH:=$(strip $(subst ",, $(BR2_LINUX26_RC_PATCH)))
-# "))
-LINUX_BSP_PATCH:=$(strip $(subst ",, $(BR2_LINUX_BSP_ATMEL_PATCH)))
-# " ))
-MKIMAGE:=$(BUILD_DIR)/mkimage
-
-ifeq ($(DOWNLOAD_LINUX26_VERSION),)
-DOWNLOAD_LINUX26_VERSION=2.6.19.2
-endif
-# Version of Linux after applying any patches
-LINUX26_VERSION=$(DOWNLOAD_LINUX26_VERSION)
-
-
-else # ---------------------------------------------------
-
-# Define DOWNLOAD_LINUX26_VERSION unless defined
-ifeq ($(strip $(BR2_DOWNLOAD_LINUX26_VERSION)),)
-DOWNLOAD_LINUX26_VERSION=$(LINUX_HEADERS_VERSION)
-else
-DOWNLOAD_LINUX26_VERSION:=$(strip $(subst ",, $(BR2_DOWNLOAD_LINUX26_VERSION)))
-# "))
-endif
-
-
-# Define LINUX26_VERSION unless defined
-ifeq ($(strip $(BR2_LINUX26_VERSION)),)
-LINUX26_VERSION=$(LINUX_HEADERS_VERSION)
-else
-LINUX26_VERSION:=$(strip $(subst ",, $(BR2_LINUX26_VERSION)))
-# "))
-endif
-
-endif # ---------------------------------------------------
-
-# Handle case when we want to build using an "rc" patch
-# Example: to build 2.6.21-rc1 you need to:
-# * Download linux-2.6.20
-# * Apply patch-2.6.21-rc1
-
-LINUX26_SOURCE:=linux-$(DOWNLOAD_LINUX26_VERSION).tar.bz2
-LINUX26_SITE=http://ftp.kernel.org/pub/linux/kernel/v2.6
-LINUX26_BZCAT:=$(BZCAT)
-
-# Linux kernel binary
-LINUX26_FORMAT:=$(strip $(subst ",, $(BR2_LINUX26_FORMAT)))
-# " ))
-
-# Linux kernel configuration file
-ifeq ($(strip $(LINUX26_KCONFIG)),)
-LINUX26_KCONFIG=$(BR2_BOARD_PATH)/linux26.config
-endif
-
-# File name for the Linux kernel binary
-ifeq ($(strip $(LINUX26_KERNEL)),)
-#LINUX26_KERNEL=linux-kernel-$(LINUX26_VERSION)-$(KERNEL_ARCH)
-LINUX26_KERNEL:=$(BOARD_NAME)-linux-$(LINUX26_VERSION)-$(DATE).gz
-endif
-
-ifeq ($(strip $(LINUX26_BINLOC)),)
-LINUX26_BINLOC=$(LINUX26_FORMAT)
-endif
-
-# Put binary in root file system
-ifeq ($(strip $(BR2_LINUX_IN_ROOTFS)),y)
-ifeq ($(strip $(LINUX26_TARGET)),)
-LINUX26_TARGET:=$(TARGET_DIR)/boot/$(LINUX26_BINLOC)
-endif
-else
-LINUX26_TARGET:=$(BINARIES_DIR)/$(LINUX26_KERNEL)
-endif
-endif
-
-ifeq ($(strip $(LINUX26_BUILD_DIR)),)
-LINUX26_BUILD_DIR=$(PROJECT_BUILD_DIR)
-endif
-
-ifeq ($(strip $(BR2_LINUX26_DEFCONFIG)),y)
-LINUX26_DEFCONFIG=$(BOARD_NAME)_defconfig
-endif
-
-# Version of Linux AFTER patches
-LINUX26_DIR=$(LINUX26_BUILD_DIR)/linux-$(LINUX26_VERSION)
-
-# for packages that need it
-LINUX_VERSION=$(LINUX26_VERSION)
-LINUX_DIR=$(LINUX26_DIR)
-LINUX_KERNEL=$(LINUX26_KERNEL)
-
-# kernel patches
-ifeq ($(strip $(subst ",, $(LINUX26_PATCH_DIR))),)
-# ")))
-LINUX26_PATCH_DIR:=$(BR2_BOARD_PATH)/kernel-patches/
-endif
-PATCH_DIR=$(strip $(subst ",, $(LINUX26_PATCH_DIR)))
-# " ))
-
-LINUX26_MAKE_FLAGS = $(TARGET_CONFIGURE_OPTS) ARCH=$(KERNEL_ARCH) \
- PATH=$(TARGET_PATH) INSTALL_MOD_PATH=$(TARGET_DIR) \
- CROSS_COMPILE=$(KERNEL_CROSS)
-
-$(LINUX26_KCONFIG):
- @if [ ! -f "$(LINUX26_KCONFIG)" ] ; then \
- echo ""; \
- echo "You should create a .config for your kernel"; \
- echo "and install it as $(LINUX26_KCONFIG)"; \
- echo ""; \
- sleep 5; \
- fi
-
-# Check if we have a release candidate.
-# This makes life complex
-# To build linux-2.6.21-rc2 you need to:
-# * Download linux.2.6.20.tar.bz2
-# * Download patch-2.6.21-rc2.bz2
-# I:E you have to download the *previous* major version
-
-ifneq ($(LINUX26_RC_PATCH),)
-# We have a "release candidate"
-LINUX26_RC_PATCH_SOURCE:=$(PROJECT_BUILD_DIR)/linux-patch/$(LINUX26_RC_PATCH)
-
-# Create rule to download the patch
-$(LINUX26_RC_PATCH_SOURCE):
- mkdir -p $(PROJECT_BUILD_DIR)/linux-patch/
- $(WGET) -P $(PROJECT_BUILD_DIR)/linux-patch $(LINUX26_SITE)/$(LINUX26_RC_PATCH)
-# $(LINUX26_BZCAT) $(PROJECT_BUILD_DIR)/linux-patch/$(LINUX26_RC_PATCH).bz2
-else
-# We have a vanilla style linux kernel
-LINUX26_RC_PATCH_SOURCE:=
-endif
-
-ifneq ($(strip $(LINUX_HEADERS_SOURCE)),$(strip $(LINUX26_SOURCE)))
-$(DL_DIR)/$(LINUX26_SOURCE):
- $(WGET) -P $(DL_DIR) $(LINUX26_SITE)/$(LINUX26_SOURCE)
-endif
-
-$(LINUX26_DIR)/.unpacked: $(DL_DIR)/$(LINUX26_SOURCE) $(LINUX26_RC_PATCH_SOURCE)
- rm -rf $(LINUX26_DIR)
- $(LINUX26_BZCAT) $(DL_DIR)/$(LINUX26_SOURCE) | tar -C $(LINUX26_BUILD_DIR) $(TAR_OPTIONS) -
-ifneq ($(DOWNLOAD_LINUX26_VERSION),$(LINUX26_VERSION))
- # Rename the dir from the downloaded version to the AFTER patch version
- mv -f $(LINUX26_BUILD_DIR)/linux-$(DOWNLOAD_LINUX26_VERSION) $(LINUX26_DIR)
-endif
-ifneq ($(LINUX26_RC_PATCH),)
- -(cd $(LINUX26_DIR); $(LINUX26_BZCAT) $(LINUX26_RC_PATCH_SOURCE) | patch -p1)
-endif
- -(cd $(TOOL_BUILD_DIR); ln -snf $(LINUX26_DIR) linux)
- rm -f $(LINUX26_DIR)/.kernelrelease
- echo $(LINUX26_VERSION) > $(LINUX26_DIR)/.kernelrelease
- touch $@
-
-$(LINUX26_DIR)/.patched: $(LINUX26_DIR)/.unpacked
- echo $(PATCH_DIR)
- toolchain/patch-kernel.sh $(LINUX26_DIR) $(LINUX26_PATCH_DIR)
- touch $@
-
-$(LINUX26_DIR)/.configured: $(LINUX26_DIR)/.patched $(LINUX26_KCONFIG)
- -ls -l $(LINUX26_DIR)/.patched
- -ls -l $(LINUX26_KCONFIG)
- -ls -l $(LINUX26_DIR)/.configured
- -ls -l $(LINUX26_DIR)/.unpacked
- -ls -l $(DL_DIR)/$(LINUX26_SOURCE)
- -ls -l $(LINUX26_RC_PATCH_SOURCE)
-ifeq ($(strip $(BR2_LINUX26_DEFCONFIG)),y)
- make ARCH=$(ARCH) -C $(LINUX26_DIR) $(BOARD_NAME)_defconfig
-else
- cp -df --preserve=mode,ownership $(LINUX26_KCONFIG) $(LINUX26_DIR)/.config
-endif
-ifeq ($(strip $(BR2_LINUX_CUSTOMIZE)),y)
- make -C $(LINUX26_DIR) xconfig
-endif
- $(SED) '/CONFIG_AEABI/d' $(LINUX26_DIR)/.config
-ifeq ($(BR2_ARM_EABI),y)
- echo "CONFIG_AEABI=y" >> $(LINUX26_DIR)/.config
- $(SED) '/CONFIG_OABI_COMPAT/d' $(LINUX26_DIR)/.config
- echo "# CONFIG_OABI_COMPAT is not set" >> $(LINUX26_DIR)/.config
-else
- echo "# CONFIG_AEABI is not set" >> $(LINUX26_DIR)/.config
-endif
- $(MAKE) $(LINUX26_MAKE_FLAGS) -C $(LINUX26_DIR) oldconfig include/linux/version.h
- touch $@
-
-$(LINUX26_DIR)/.depend_done: $(LINUX26_DIR)/.configured
- $(MAKE) $(LINUX26_MAKE_FLAGS) -C $(LINUX26_DIR) prepare
- touch $@
-
-$(LINUX26_DIR)/arch/$(ARCH)/boot/$(LINUX26_FORMAT): $(LINUX26_DIR)/vmlinux
- $(MAKE) $(LINUX26_MAKE_FLAGS) -C $(LINUX26_DIR) $(LINUX26_FORMAT)
- $(MAKE) $(LINUX26_MAKE_FLAGS) -C $(LINUX26_DIR) modules
- touch -c $@
-
-$(LINUX26_DIR)/vmlinux: $(LINUX26_DIR)/.depend_done $(STAGING_DIR)/include/linux/version.h
- $(MAKE) $(LINUX26_MAKE_FLAGS) -C $(LINUX26_DIR) vmlinux
- $(MAKE) $(LINUX26_MAKE_FLAGS) -C $(LINUX26_DIR) modules
- touch -c $@
-
-
-
-#-----------------------------------------------------------------------------------
-# Rule can be enabled by setting
-# LINUX26_TARGET:= $(TARGET_DIR)/boot/$(LINUX26_BINLOC)
-#
-$(TARGET_DIR)/boot/$(LINUX26_FORMAT): $(LINUX26_DIR)/$(LINUX26_FORMAT)
- [ -d $(TARGET_DIR)/boot/ ] || mkdir $(TARGET_DIR)/boot
- cp -a $(LINUX26_DIR)/$(LINUX26_FORMAT) $(LINUX26_DIR)/System.map $(TARGET_DIR)/boot/$(LINUX26_FORMAT)
- touch -c $@
-
-#-----------------------------------------------------------------------------------
-# Rule can be enabled by setting
-# LINUX26_TARGET:= $(BINARIES_DIR)/$(LINUX26_KERNEL)
-# LINUX26_FORMAT:= vmlinux
-
-$(BINARIES_DIR)/$(LINUX26_KERNEL): $(LINUX26_DIR)/uImage
- cp -dpf $(LINUX26_DIR)/uImage $(BINARIES_DIR)/$(LINUX26_KERNEL)
- cp -dpf $(LINUX26_DIR)/uImage /tftpboot/$(LINUX26_KERNEL)
- mkdir -p $(TARGET_DIR)/boot/
- cp -dpf $(LINUX26_DIR)/.config $(TARGET_DIR)/boot/$(BOARD_NAME)-linux-$(LINUX26_VERSION).config
- cp -dpf .config $(TARGET_DIR)/boot/$(BOARD_NAME)-buildroot.config
- cp -dpf $(BUSYBOX_DIR)/.config $(TARGET_DIR)/boot/busybox.config
-
-$(PROJECT_BUILD_DIR)/linux.bin: $(LINUX26_DIR)/vmlinux
- ${KERNEL_CROSS}objcopy -O binary -S $(LINUX26_DIR)/vmlinux $(PROJECT_BUILD_DIR)/linux.bin
-
-$(LINUX26_DIR)/uImage: $(LINUX26_DIR)/arch/$(ARCH)/boot/uImage
- cp -dpf $(LINUX26_DIR)/arch/$(ARCH)/boot/uImage $(LINUX26_DIR)/uImage
-
-
-$(PROJECT_BUILD_DIR)/xxxx: $(PROJECT_BUILD_DIR)/linux.bin $(MKIMAGE)
- gzip -v9 -c $(PROJECT_BUILD_DIR)/linux.bin > $(PROJECT_BUILD_DIR)/linux.bin.gz
- $(MKIMAGE) -A $(ARCH) \
- -O linux \
- -C gzip \
- -a 0x20008000 \
- -e 0x20008000 \
- -d $(PROJECT_BUILD_DIR)/linux.bin.gz \
- $(LINUX26_DIR)/uImage
- rm -f $(PROJECT_BUILD_DIR)/linux.bin.gz
-#-----------------------------------------------------------------------------------
-
-$(TARGET_DIR)/lib/modules/$(LINUX26_VERSION)/modules.dep: $(LINUX26_TARGET) $(TARGET_DIR)/sbin/modprobe $(LINUX26_DIR)/vmlinux
- rm -rf $(TARGET_DIR)/lib/modules/$(LINUX26_VERSION)
- rm -f $(TARGET_DIR)/sbin/cardmgr
- $(MAKE) $(LINUX26_MAKE_FLAGS) -C $(LINUX26_DIR) \
- DEPMOD=$(STAGING_DIR)/bin/$(GNU_TARGET_NAME)-depmod26 \
- INSTALL_MOD_PATH=$(TARGET_DIR) modules_install
- (cd $(TARGET_DIR)/lib/modules; \
- rm -f drivers; \
- ln -s $(LINUX26_VERSION)/kernel/drivers .)
- chmod a+x target/depmod.pl
- target/depmod.pl \
- -b $(TARGET_DIR)/lib/modules/$(DOWNLOAD_LINUX26_VERSION) \
- -k $(LINUX26_DIR)/vmlinux \
- -F $(LINUX26_DIR)/System.map \
- > $(TARGET_DIR)/lib/modules/$(shell cat $(LINUX26_DIR)/include/config/kernel.release 2> /dev/null)/modules.dep
- rm -f $(TARGET_DIR)/lib/modules/$(LINUX26_VERSION)/build
- touch -c $@
-
-$(STAGING_DIR)/include/linux/version.h: $(LINUX26_DIR)/.configured
- mkdir -p $(STAGING_DIR)/include
- tar -ch -C $(LINUX26_DIR)/include -f - linux | tar -xf - -C $(STAGING_DIR)/include/
- tar -ch -C $(LINUX26_DIR)/include -f - asm | tar -xf - -C $(STAGING_DIR)/include/
-
-linux26-menuconfig: $(LINUX26_DIR)/.patched host-sed
- [ -f $(LINUX26_DIR)/.config ] || cp $(LINUX26_KCONFIG) $(LINUX26_DIR)/.config
- $(MAKE) $(LINUX26_MAKE_FLAGS) -C $(LINUX26_DIR) menuconfig
- -[ -f $(LINUX26_DIR)/.config ] && touch $(LINUX26_DIR)/.configured
-
-linux26: cross-depmod26 $(TARGET_DIR)/lib/modules/$(LINUX26_VERSION)/modules.dep $(LINUX26_TARGET)
-
-linux26-source: $(DL_DIR)/$(LINUX26_SOURCE)
-
-# This has been renamed so we do _NOT_ by default run this on 'make clean'
-linux26clean:
- rm -f $(LINUX26_TARGET)
- rm -f $(PROJECT_BUILD_DIR)/linux.bin
- rm -f $(LINUX26_DIR)/uImage
- -$(MAKE) PATH=$(TARGET_PATH) -C $(LINUX26_DIR) clean
-
-linux26-dirclean:
- rm -f $(LINUX26_TARGET)
- rm -f $(PROJECT_BUILD_DIR)/linux.bin
- rm -rf $(LINUX26_DIR)
-
-linux-update:
- cp -dpf $(LINUX26_DIR)/.config $(LINUX26_KCONFIG)
-
-linux-test:
- @echo "LINUX_HEADERS_VERSION" $(LINUX_HEADERS_VERSION)
- @echo "BR2_PACKAGE_LINUX" $(BR2_PACKAGE_LINUX)
- @echo "BR2_CUSTOM_DOWNLOAD_LINUX26_VERSION" $(BR2_CUSTOM_DOWNLOAD_LINUX26_VERSION)
- @echo "BR2_CUSTOM_LINUX26_VERSION" $(BR2_CUSTOM_LINUX26_VERSION)
- @echo "BR2_CUSTOM_LINUX26_RC_PATCH" $(BR2_CUSTOM_LINUX26_RC_PATCH)
- @echo "BR2_LINUX_BSP_PATCH" $(BR2_LINUX_BSP_PATCH)
- @echo "BR2_DOWNLOAD_LINUX26_VERSION" $(BR2_DOWNLOAD_LINUX26_VERSION)
- @echo "BR2_LINUX26_VERSION" $(BR2_LINUX26_VERSION)
- @echo "LINUX26_VERSION" $(LINUX26_VERSION)
- @echo "BR2_LINUX26_RC_PATCH" $(BR2_LINUX26_RC_PATCH)
- @echo "BR2_PACKAGE_LINUX26_KCONFIG" $(BR2_PACKAGE_LINUX_KCONFIG)
- @echo "LINUX26_KCONFIG" $(LINUX26_KCONFIG)
- @echo "BR2_LINUX_BIN_CUSTOM" $(BR2_LINUX_BIN_CUSTOM)
- @echo "BR2_PACKAGE_LINUX_FORMAT" $(BR2_PACKAGE_LINUX_FORMAT)
- @echo "BR2_LINUX_IN_ROOTFS" $(BR2_LINUX_IN_ROOTFS)
- @echo "BR2_LINUX_2_6_22_1" $(BR2_LINUX_2_6_22_1)
-
#comment "Linux kernel options"
-config BR2_PACKAGE_LINUX
- bool "linux kernel"
- depends on BR2_KERNEL_LINUX
- default y
- help
- The Linux kernel.
- http://www.kernel.org/
-
- Note: Requires kernel-headers >= 2.6.19 since the other
- kernel headers are just that (headers) and not full
- kernels. This is a feature.
-
-config BR2_PACKAGE_LINUX_EXPERIMENTAL_CONFIG
- bool "linux kernel experimental configuration"
- depends on BR2_PACKAGE_LINUX
- depends on BR2_TARGET_ATMEL
- default n
- help
- More advanced configuration (in development)
-
-
-
-if ! BR2_PACKAGE_LINUX_EXPERIMENTAL_CONFIG
+if BR2_KERNEL_LINUX
config BR2_PACKAGE_LINUX_KCONFIG
string ".config file"
depends on BR2_PACKAGE_LINUX
board-imposed value by passing LINUX26_FORMAT=<string> to
make.
endif
-
-if BR2_PACKAGE_LINUX_EXPERIMENTAL_CONFIG
-
-choice
- prompt "Linux Kernel Version"
- depends on BR2_PACKAGE_LINUX
- default BR2_LINUX_2_6_22_1 if !BR2_avr32
- default BR2_LINUX_2_6_22_10 if BR2_avr32
- help
- Select the specific Linux version you want to use
-
-config BR2_LINUX_2_6_SNAP
- bool "The latest snapshot for the stable Linux kernel"
- depends BR2_PACKAGE_LINUX
- help
- Linux 2.6.x-git#
-
-config BR2_LINUX_2_6_MM
- bool "With latest -mm patch for the stable Linux kernel"
- depends BR2_PACKAGE_LINUX
- help
- Linux 2.6.x-rc#-mm#
-
-config BR2_LINUX_2_6_STABLE
- bool "The latest stable Linux kernel (2.6.22.1)"
- depends BR2_PACKAGE_LINUX
- help
- Linux 2.6.22.1
-
-config BR2_LINUX_2_6_22_10
- bool "Linux 2.6.22.10"
- depends BR2_PACKAGE_LINUX
- help
- Linux 2.6.22.10
-
-config BR2_LINUX_2_6_22_1
- bool "Linux 2.6.22.1"
- depends BR2_PACKAGE_LINUX
- help
- Linux 2.6.22.1
-
-config BR2_LINUX_2_6_22
- bool "Linux 2.6.22"
- depends BR2_PACKAGE_LINUX
- help
- Linux 2.6.22
-
-config BR2_LINUX_2_6_21_6
- bool "Linux 2.6.21.6"
- depends BR2_PACKAGE_LINUX
- help
- Linux 2.6.21.6
-
-config BR2_LINUX_2_6_21_1
- bool "Linux 2.6.21.1"
- depends BR2_PACKAGE_LINUX
- help
- Linux 2.6.21.1
-
-config BR2_LINUX_2_6_21
- bool "Linux 2.6.21"
- depends BR2_PACKAGE_LINUX
- help
- Linux 2.6.21
-
-config BR2_LINUX_2_6_20_4
- bool "Linux 2.6.20.4"
- depends BR2_PACKAGE_LINUX
- help
- Linux 2.6.20.4
-
-config BR2_LINUX_2_6_20
- bool "Linux 2.6.20"
- depends BR2_PACKAGE_LINUX
- help
- Linux 2.6.20
-
-config BR2_LINUX_2_6_19_2
- bool "Linux 2.6.19.2"
- depends BR2_PACKAGE_LINUX
- help
- Linux 2.6.19.2
-
-config BR2_LINUX_2_6_19
- bool "Linux 2.6.19"
- depends BR2_PACKAGE_LINUX
- help
- Linux 2.6.19
-
-config BR2_LINUX_2_6_18
- bool "Linux 2.6.18"
- depends BR2_PACKAGE_LINUX
- help
- Linux 2.6.18
-
-config BR2_LINUX_2_6_17
- bool "Linux 2.6.17"
- depends BR2_PACKAGE_LINUX
- help
- Linux 2.6.17
-
-config BR2_LINUX_2_6_16
- bool "Linux 2.6.16"
- depends BR2_PACKAGE_LINUX
- help
- Linux 2.6.16
-
-config BR2_LINUX_2_6_15
- bool "Linux 2.6.15"
- depends BR2_PACKAGE_LINUX
- help
- Linux 2.6.15
-
-config BR2_LINUX_2_6_23
- bool "Linux 2.6.23"
- depends BR2_PACKAGE_LINUX
- help
- Linux 2.6.23
-
-config BR2_LINUX_CUSTOM
- bool "Linux <custom> version"
- depends BR2_PACKAGE_LINUX
- help
- Linux <your selection>
-
-endchoice
-
-config BR2_CUSTOM_DOWNLOAD_LINUX26_VERSION
- string "Linux Tarball version"
- depends on BR2_LINUX_CUSTOM
- default "linux-2.6.22"
-
-config BR2_CUSTOM_LINUX26_VERSION
- string "Linux Version"
- depends on BR2_LINUX_CUSTOM
- default "linux-2.6.22-version"
-
-config BR2_CUSTOM_LINUX26_RC_PATCH
- string "RC patch (if needed)"
- depends on BR2_LINUX_CUSTOM
- default "patch-2.6.22-rc6-mm1.bz2"
-
-menu "Patches"
- depends on BR2_PACKAGE_LINUX
-
-config BR2_LINUX_BSP_PATCH
- string "Additional patch to apply (supply full path)"
- default ""
-
-endmenu
-
-config BR2_DOWNLOAD_LINUX26_VERSION
- string #"Selected Tarball:"
- default "2.6.15" if BR2_LINUX_2_6_15
- default "2.6.16" if BR2_LINUX_2_6_16
- default "2.6.17" if BR2_LINUX_2_6_17
- default "2.6.18" if BR2_LINUX_2_6_18
- default "2.6.19" if BR2_LINUX_2_6_19
- default "2.6.19.2" if BR2_LINUX_2_6_19_2
- default "2.6.20" if BR2_LINUX_2_6_20
- default "2.6.20.4" if BR2_LINUX_2_6_20_4
- default "2.6.21" if BR2_LINUX_2_6_21
- default "2.6.21.1" if BR2_LINUX_2_6_21_1
- default "2.6.21.6" if BR2_LINUX_2_6_21_6
- default "2.6.22" if BR2_LINUX_2_6_22
- default "2.6.22.1" if BR2_LINUX_2_6_22_1
- default "2.6.22.10" if BR2_LINUX_2_6_22_10
- default "2.6.22" if BR2_LINUX_2_6_23_RC1
- default "2.6.22" if BR2_LINUX_2_6_SNAP
- default "2.6.22" if BR2_LINUX_2_6_MM
- default $(BR2_CUSTOM_DOWNLOAD_LINUX26_VERSION) if BR2_LINUX_CUSTOM
-
-config BR2_LINUX26_VERSION
- string #"Selected Version:"
- default "2.6.15" if BR2_LINUX_2_6_15
- default "2.6.16" if BR2_LINUX_2_6_16
- default "2.6.17" if BR2_LINUX_2_6_17
- default "2.6.18" if BR2_LINUX_2_6_18
- default "2.6.19" if BR2_LINUX_2_6_19
- default "2.6.19.2" if BR2_LINUX_2_6_19_2
- default "2.6.20" if BR2_LINUX_2_6_20
- default "2.6.20.4" if BR2_LINUX_2_6_20_4
- default "2.6.21" if BR2_LINUX_2_6_21
- default "2.6.21.1" if BR2_LINUX_2_6_21_1
- default "2.6.21.6" if BR2_LINUX_2_6_21_6
- default "2.6.22" if BR2_LINUX_2_6_22
- default "2.6.22.1" if BR2_LINUX_2_6_22_1
- default "2.6.22.10" if BR2_LINUX_2_6_22_10
- default "2.6.22" if BR2_LINUX_2_6_23_RC1
- default "2.6.22" if BR2_LINUX_2_6_SNAP
- default "2.6.22" if BR2_LINUX_2_6_MM
- default $(BR2_CUSTOM_LINUX26_VERSION) if BR2_LINUX_CUSTOM
-
-config BR2_LINUX26_RC_PATCH
- string #"Selected Patch:"
- default "" if BR2_LINUX_2_6_15
- default "" if BR2_LINUX_2_6_16
- default "" if BR2_LINUX_2_6_17
- default "" if BR2_LINUX_2_6_18
- default "" if BR2_LINUX_2_6_19
- default "" if BR2_LINUX_2_6_19_2
- default "" if BR2_LINUX_2_6_20
- default "" if BR2_LINUX_2_6_20_4
- default "" if BR2_LINUX_2_6_21
- default "" if BR2_LINUX_2_6_21_1
- default "" if BR2_LINUX_2_6_21_6
- default "" if BR2_LINUX_2_6_22
- default "" if BR2_LINUX_2_6_22_1
- default "" if BR2_LINUX_2_6_22_10
- default "patch-2.6.23-rc1.bz2" if BR2_LINUX_2_6_23_RC1
- default $(BR2_CUSTOM_LINUX26_RC_PATCH) if BR2_LINUX_CUSTOM
-
-choice
- prompt "Linux Kernel Configuration"
- depends on BR2_PACKAGE_LINUX
- default BR2_PACKAGE_LINUX_USE_KCONFIG
- help
- Select the way to configure the Linux
-
-config BR2_PACKAGE_LINUX_USE_KCONFIG
- bool ".config file"
- depends on BR2_PACKAGE_LINUX
- help
- kernel's .config to use to build a kernel for the target.
-
- If the above setting is empty, you can change the default
- board-imposed value by passing LINUX26_KCONFIG=<path> to
- make.
-
-config BR2_LINUX26_DEFCONFIG
- bool "Run make <board>_defconfig "
- depends BR2_PACKAGE_LINUX
- help
- Configure Linux by make <board>_defconfig
-
-config BR2_LINUX_CUSTOMIZE
- bool "Run make ARCH=$(ARCH) xconfig before build"
- depends BR2_PACKAGE_LINUX
- help
- Configure Linux by make xconfig
-endchoice
-
-config BR2_PACKAGE_LINUX_KCONFIG
- string ".config file"
- depends on BR2_PACKAGE_LINUX_USE_KCONFIG
- default "$(BR2_BOARD_PATH)/$(BR2_BOARD_NAME)-linux-$(LINUX26_VERSION).config"
- help
- kernel's .config to use to build a kernel for the target.
-
- If the above setting is empty, you can change the default
- board-imposed value by passing LINUX26_KCONFIG=<path> to
- make.
-
-choice
- prompt "kernel binary format"
- depends on BR2_PACKAGE_LINUX
- default BR2_LINUX_BIN_UIMAGE
- help
- Select the specific Linux binary type you want to use
-
-config BR2_LINUX_BIN_BZIMAGE
- bool "bzImage"
- depends BR2_PACKAGE_LINUX
- help
- Linux 2.6.19.2
-
-config BR2_LINUX_BIN_UIMAGE
- bool "uImage"
- depends BR2_PACKAGE_LINUX
- help
- Build uImage binary
-
-config BR2_LINUX_BIN_VMLINUX
- bool "vmlinux"
- depends BR2_PACKAGE_LINUX
- help
- Build vmlinux binary
-
-config BR2_LINUX_BIN_ZIMAGE
- bool "zImage"
- depends BR2_PACKAGE_LINUX
- help
- Linux 2.6.19.2
-
-config BR2_LINUX_BIN_CUSTOM
- bool "<custom> Linux binary"
- depends BR2_PACKAGE_LINUX
- help
- Build custom Linux binary format
-endchoice
-
-config BR2_LINUX_BIN_CUSTOM_BIN
- string "custom kernel binary format"
- depends on BR2_LINUX_BIN_CUSTOM
- default ""
- help
- Which Linux binary format?
-
-config BR2_PACKAGE_LINUX_FORMAT
- string #"kernel binary format"
- depends on BR2_PACKAGE_LINUX
- default "bzImage" if BR2_LINUX_BIN_BZIMAGE
- default "uImage" if BR2_LINUX_BIN_UIMAGE
- default "vmlinux" if BR2_LINUX_BIN_VMLINUX
- default "zImage" if BR2_LINUX_BIN_ZIMAGE
- default $(BR2_LINUX_BIN_CUSTOM_BIN) if BR2_LINUX_BIN_CUSTOM
- help
- kernel binary format.
- Popular values include:
- - bzImage
- - zImage
- - vmlinux
- - zImage
- - xipImage
- and other, architecture dependant formats.
-
- Note that the default format is supposed to be set by your
- board-description, if any.
- i386 and compatible default to bzImage if nothing was given
- above.
- If the above setting is empty, you can change the default
- board-imposed value by passing LINUX26_FORMAT=<string> to
- make.
-
-comment "Destinations for linux kernel binaries"
- depends on BR2_PACKAGE_LINUX
-
-config BR2_LINUX_IN_ROOTFS
- bool "Copy kernel to root file system"
- depends BR2_PACKAGE_LINUX
- default n
- help
- Copy kernel to <root>/boot directory
-
-menuconfig BR2_LINUX_COPY
- bool "Secondary Copy"
- depends on BR2_PACKAGE_LINUX
- default y
-
-config BR2_LINUX_COPYTO
- string "also copy the image to..."
- depends BR2_LINUX_COPY
- default "/tftpboot"
- help
- Copy kernel to secondary location
-
-endif
--- /dev/null
+if BR2_KERNEL_LINUX_ADVANCED
+# --- "Linux kernel options"
+# This file exports the following symbols for use by Makefile's
+#
+# BR2_PACKAGE_LINUX
+#
+# BR2_KERNEL_SITE
+# BR2_DOWNLOAD_LINUX26_VERSION
+# BR2_LINUX26_VERSION
+#
+# BR2_KERNEL_PATCH_SITE
+# BR2_KERNEL_PATCH
+#
+# BR2_LINUX26_CUSTOM
+# BR2_CUSTOM_LINUX26_PATCH_SITE
+# BR2_CUSTOM_LINUX26_PATCH
+#
+# BR2_LINUX_BSP_PATCH
+#
+# BR2_PACKAGE_LINUX_USE_KCONFIG
+# BR2_PACKAGE_LINUX_USE_DEFCONFIG
+# BR2_PACKAGE_LINUX_USE_XCONFIG
+# BR2_PACKAGE_LINUX_KCONFIG
+#
+# BR2_PACKAGE_LINUX_FORMAT
+#
+# BR2_LINUX_COPYTO_ROOTFS
+# BR2_LINUX_COPYTO_TFTPBOOT
+# BR2_LINUX_COPYTO
+#
+# ---------------------------------------------------------------------------
+# --- These 'constants' requires regular maintenance, so put them first
+config BR2_KERNEL_PATCH_LEVEL
+ string
+ default "1" if BR2_LINUX_2_6_23 && BR2_KERNEL_ADD_LATEST_MINORPATCH
+ default "10" if BR2_LINUX_2_6_22 && BR2_KERNEL_ADD_LATEST_MINORPATCH
+ default "7" if BR2_LINUX_2_6_21 && BR2_KERNEL_ADD_LATEST_MINORPATCH
+ default "20" if BR2_LINUX_2_6_20 && BR2_KERNEL_ADD_LATEST_MINORPATCH
+ default "$(BR2_KERNEL_MINORLEVEL)" if BR2_KERNEL_ADD_MINORPATCH
+
+config BR2_KERNEL_CURRENT_VERSION
+ string
+ default "2.6.23.1"
+
+config BR2_KERNEL_NEXT_VERSION
+ string
+ default "2.6.24" if BR2_LINUX_2_6_23
+ default "2.6.23" if BR2_LINUX_2_6_22
+ default "2.6.22" if BR2_LINUX_2_6_21
+ default "2.6.21" if BR2_LINUX_2_6_20
+
+config BR2_KERNEL_THIS_VERSION
+ string
+ default "2.6.23" if BR2_LINUX_2_6_23
+ default "2.6.22" if BR2_LINUX_2_6_22
+ default "2.6.21" if BR2_LINUX_2_6_21
+ default "2.6.20" if BR2_LINUX_2_6_20
+
+config LINUX26_LATEST_RC_VERSION
+ string
+ default "2.6.23" if BR2_KERNEL_ADD_LATEST_RC_PATCH
+
+config LINUX26_LATEST_MM_VERSION
+ string
+ default "2.6.23-mm1" if BR2_KERNEL_ADD_LATEST_MM_PATCH
+
+config LINUX26_LATEST_GIT_VERSION
+ string
+ default "2.6.23-git3" if BR2_KERNEL_ADD_LATEST_SNAPSHOT
+
+config BR2_KERNEL_SITE
+ string
+ default "http://ftp.kernel.org/pub/linux/kernel/v2.6/"
+
+config BR2_MM_PATCH_SITE
+ string
+ default "http://ftp.kernel.org/pub/linux/kernel/people/akpm/patches/2.6"
+
+config BR2_MM_PATCH_DIR
+ string
+ default "$(BR2_DOWNLOAD_LINUX26_VERSION)/$(LINUX26_LATEST_MM_VERSION)" if BR2_KERNEL_ADD_LATEST_MM_PATCH
+ default "$(BR2_DOWNLOAD_LINUX26_VERSION)/$(BR2_LINUX26_MM_VERSION)" if BR2_KERNEL_ADD_MM_PATCH
+
+config BR2_RC_MM_PATCH_DIR
+ string
+ default "$(BR2_KERNEL_NEXT_VERSION)-rc$(BR2_KERNEL_RC_LEVEL)/2.6.$(BR2_KERNEL_NEXT_VERSION)-rc$(BR2_KERNEL_RC_LEVEL)-mm$(BR2_KERNEL_MM_LEVEL)"
+
+config BR2_KERNEL_PATCH_SITE
+ string
+ default "http://ftp.kernel.org/pub/linux/kernel/v2.6/" if BR2_KERNEL_ADD_MINORPATCH
+ default "http://ftp.kernel.org/pub/linux/kernel/v2.6/testing/" if BR2_KERNEL_ADD_RC_PATCH || BR2_KERNEL_ADD_LATEST_RC_PATCH
+ default "http://ftp.kernel.org/pub/linux/kernel/v2.6/snapshots/" if BR2_KERNEL_ADD_SNAPSHOT || BR2_KERNEL_ADD_LATEST_SNAPSHOT
+ default "$(BR2_MM_PATCH_SITE)/$(BR2_MM_PATCH_DIR)/" if BR2_KERNEL_ADD_MM_PATCH || BR2_KERNEL_ADD_LATEST_MM_PATCH
+ default $(BR2_CUSTOM_LINUX26_PATCH_SITE) if BR2_LINUX26_CUSTOM
+
+config BR2_LINUX26_RC_VERSION
+ string
+ default "$(BR2_KERNEL_NEXT_VERSION)-rc$(BR2_KERNEL_RC_LEVEL)" if BR2_KERNEL_ADD_RC_PATCH
+
+config BR2_LINUX26_SNAPSHOT_VERSION
+ string
+ default "$(BR2_KERNEL_THIS_VERSION)-git$(BR2_KERNEL_GIT_LEVEL)" if BR2_KERNEL_ADD_SNAPSHOT
+
+config BR2_LINUX26_RC_SNAPSHOT_VERSION
+ string
+ default "$(BR2_KERNEL_NEXT_VERSION)-rc$(BR2_KERNEL_RC_LEVEL)-git$(BR2_KERNEL_GIT_LEVEL)" if BR2_KERNEL_ADD_SNAPSHOT
+
+config BR2_LINUX26_MM_VERSION
+ string
+ default "$(BR2_KERNEL_THIS_VERSION)-mm$(BR2_KERNEL_MM_LEVEL)" if BR2_KERNEL_ADD_MM_PATCH
+
+config BR2_LINUX26_RC_MM_VERSION
+ string
+ default "$(BR2_KERNEL_NEXT_VERSION)-rc$(BR2_KERNEL_RC_LEVEL)-mm$(BR2_KERNEL_MM_LEVEL)" if BR2_KERNEL_ADD_MM_PATCH
+
+# ---------------------------------------------------------------------------
+
+choice
+ prompt "Linux Kernel Version"
+ default BR2_LINUX_2_6_22_10 if BR2_avr32
+ default BR2_LINUX_2_6_22_1 if !BR2_avr32 && BR2_TARGET_ATMEL
+ default BR2_LINUX_2_6_22 if !BR2_TARGET_ATMEL
+ help
+ Select the specific Linux version you want to use
+
+config BR2_LINUX_2_6_STABLE
+ bool "The latest stable Linux kernel (2.6.23)"
+ help
+ Linux 2.6.23
+
+config BR2_LINUX_2_6_23
+ bool "Linux 2.6.23"
+ select BR2_KERNEL_BASE
+ help
+ Linux 2.6.23
+
+config BR2_LINUX_2_6_22_10
+ bool "Linux 2.6.22.10"
+ select BR2_KERNEL_PREPATCHED
+ help
+ Linux 2.6.22.10
+
+config BR2_LINUX_2_6_22_1
+ bool "Linux 2.6.22.1"
+ select BR2_KERNEL_PREPATCHED
+ help
+ Linux 2.6.22.1
+
+config BR2_LINUX_2_6_22
+ bool "Linux 2.6.22"
+ select BR2_KERNEL_LATEST
+ select BR2_KERNEL_BASE
+ help
+ Linux 2.6.22
+
+config BR2_LINUX_2_6_21_7
+ bool "Linux 2.6.21.7"
+ select BR2_KERNEL_PREPATCHED
+ help
+ Linux 2.6.21.1
+
+config BR2_LINUX_2_6_21_5
+ bool "Linux 2.6.21.5"
+ select BR2_KERNEL_PREPATCHED
+ help
+ Linux 2.6.21.5
+
+config BR2_LINUX_2_6_21
+ bool "Linux 2.6.21"
+ select BR2_KERNEL_BASE
+ help
+ Linux 2.6.21
+
+config BR2_LINUX_2_6_20
+ bool "Linux 2.6.20"
+ select BR2_KERNEL_BASE
+ help
+ Linux 2.6.20
+
+config BR2_LINUX26_CUSTOM
+ bool "Linux <custom> version"
+ help
+ Linux <your selection>
+
+endchoice
+
+if BR2_LINUX26_CUSTOM
+config BR2_CUSTOM_DOWNLOAD_LINUX26_VERSION
+ string "Linux Tarball version"
+ default "linux-2.6.22"
+ help
+ Specify any .tar.bz2 file
+
+config BR2_CUSTOM_LINUX26_VERSION
+ string "Linux Version"
+ default "linux-2.6.22-version"
+ help
+ Specify what the linux version will be called
+
+config BR2_CUSTOM_LINUX26_PATCH
+ string "patch name"
+ default "patch-2.6.22-rc6-mm1.bz2"
+ help
+ Specify a patch to be downloaded
+
+config BR2_CUSTOM_LINUX26_PATCH_SITE
+ string "patch site"
+ default "http://"
+ help
+ Specify from where the patch will be downloaded.
+
+endif
+
+# -----------------------------------------------
+
+menu "Patches"
+ depends on BR2_PACKAGE_LINUX
+
+choice
+ prompt "Add a patch to the Linux Kernel"
+ depends on BR2_PACKAGE_LINUX
+ depends on !BR2_KERNEL_PREPATCHED
+ default BR2_KERNEL_ADD_NO_PATCH
+ help
+ Select a patch to add to the Linux kernel
+
+config BR2_KERNEL_ADD_NO_PATCH
+ bool "Do not add a patch"
+
+config BR2_KERNEL_ADD_LATEST_MINORPATCH
+ bool "Add _latest_ '.#' minor patch"
+ select BR2_KERNEL_ADD_PATCH
+
+config BR2_KERNEL_ADD_MINORPATCH
+ bool "Add a '.#' minor patch"
+ select BR2_KERNEL_ADD_PATCH
+
+config BR2_KERNEL_ADD_LATEST_RC_PATCH
+ bool "Add _latest_ '-rc#' patch"
+ select BR2_KERNEL_ADD_PATCH
+
+config BR2_KERNEL_ADD_RC_PATCH
+ bool "Add an '-rc#' patch"
+ select BR2_KERNEL_ADD_PATCH
+
+config BR2_KERNEL_ADD_LATEST_SNAPSHOT
+ bool "Add _latest_ 'snapshot' patch"
+ select BR2_KERNEL_ADD_PATCH
+
+config BR2_KERNEL_ADD_SNAPSHOT
+ bool "Add a 'snapshot' patch (linux-2.6.X-rc#-git#)"
+ select BR2_KERNEL_ADD_PATCH
+
+config BR2_KERNEL_ADD_LATEST_MM_PATCH
+ bool "Add latest '-mm' patch for the stable linux kernel"
+ select BR2_KERNEL_ADD_PATCH
+
+config BR2_KERNEL_ADD_MM_PATCH
+ bool "Add an '-mm#' patch for the stable linux kernel"
+ select BR2_KERNEL_ADD_PATCH
+
+endchoice
+
+config BR2_KERNEL_ADD_PATCH
+ bool
+ default n
+
+
+config BR2_KERNEL_MINORLEVEL
+ string "patch level"
+ default ""
+ depends on BR2_KERNEL_ADD_MINORPATCH
+
+config BR2_KERNEL_RC_LEVEL
+ string "-rc patch Level"
+ default ""
+ depends on BR2_KERNEL_ADD_RC_PATCH || BR2_KERNEL_ADD_SNAPSHOT
+
+config BR2_KERNEL_GIT_LEVEL
+ string "-git patch Level"
+ default ""
+ depends on BR2_KERNEL_ADD_SNAPSHOT
+
+config BR2_KERNEL_MM_LEVEL
+ string "-mm patch Level"
+ default ""
+ depends on BR2_KERNEL_ADD_MM_PATCH
+
+config BR2_LINUX_BSP_PATCH
+ string "Additional patch to apply (from \$(DL_DIR))"
+ default ""
+ help
+ Apply a patch located in \$(DL_DIR).
+ You need to download or create this before
+ enable this option
+
+config BR2_KERNEL_PATCH
+ string
+ default "patch-$(BR2_DOWNLOAD_LINUX26_VERSION).$(BR2_KERNEL_PATCH_LEVEL).bz2" if BR2_KERNEL_ADD_MINORPATCH || BR2_KERNEL_ADD_LATEST_MINORPATCH
+ default "patch-$(LINUX26_LATEST_RC_VERSION).bz2" if BR2_KERNEL_ADD_LATEST_RC_PATCH
+ default "patch-$(BR2_LINUX26_RC_VERSION).bz2" if BR2_KERNEL_ADD_RC_PATCH
+ default "patch-$(LINUX26_LATEST_GIT_VERSION).bz2" if BR2_KERNEL_ADD_LATEST_SNAPSHOT
+ default "patch-$(BR2_LINUX26_SNAPSHOT_VERSION).bz2" if BR2_KERNEL_ADD_SNAPSHOT
+ default "$(LINUX26_LATEST_MM_VERSION).bz2" if BR2_KERNEL_ADD_LATEST_MM_PATCH
+ default "$(BR2_LINUX26_MM_VERSION).bz2" if BR2_KERNEL_ADD_MM_PATCH
+ default $(BR2_CUSTOM_LINUX26_PATCH) if BR2_LINUX26_CUSTOM
+
+endmenu
+
+# -----------------------------------------------
+
+config BR2_KERNEL_PREPATCHED
+ bool
+ default n
+
+config BR2_KERNEL_BASE
+ bool
+ default n
+
+config BR2_KERNEL_LATEST
+ bool
+ default n
+
+config BR2_DOWNLOAD_LINUX26_VERSION
+ string
+ default "$(BR2_KERNEL_THIS_VERSION)" if BR2_KERNEL_BASE
+ default "2.6.21.5" if BR2_LINUX_2_6_21_5
+ default "2.6.21.7" if BR2_LINUX_2_6_21_7
+ default "2.6.22.1" if BR2_LINUX_2_6_22_1
+ default "2.6.22.10" if BR2_LINUX_2_6_22_10
+ default "$(BR2_KERNEL_CURRENT_VERSION)"if BR2_LINUX_2_6_STABLE
+ default "$(BR2_DEFAULT_KERNEL_HEADERS)" if BR2_KERNEL_LINUX_HEADERS_VERSION
+ default $(BR2_CUSTOM_DOWNLOAD_LINUX26_VERSION) if BR2_LINUX26_CUSTOM
+
+config BR2_LINUX26_VERSION
+ string
+ default "$(BR2_KERNEL_THIS_VERSION).$(BR2_KERNEL_PATCH_LEVEL)" if BR2_KERNEL_BASE && BR2_KERNEL_ADD_MINORPATCH
+ default "$(LINUX26_LATEST_RC_VERSION)" if BR2_KERNEL_ADD_LATEST_RC_PATCH
+ default "$(LINUX26_LATEST_MM_VERSION)" if BR2_KERNEL_ADD_LATEST_MM_PATCH
+ default "$(LINUX26_LATEST_GIT_VERSION)" if BR2_KERNEL_ADD_LATEST_SNAPSHOT
+ default "$(BR2_LINUX26_RC_VERSION)" if BR2_KERNEL_BASE && BR2_KERNEL_ADD_RC_PATCH
+ default "$(BR2_LINUX26_SNAPSHOT_VERSION)" if BR2_KERNEL_BASE && BR2_KERNEL_ADD_SNAPSHOT
+ default "$(BR2_LINUX26_MM_VERSION)" if BR2_KERNEL_BASE && BR2_KERNEL_ADD_MM_PATCH
+ default "$(BR2_KERNEL_THIS_VERSION)" if BR2_KERNEL_BASE && ! BR2_KERNEL_ADD_PATCH
+ default "2.6.21.5" if BR2_LINUX_2_6_21_5
+ default "2.6.21.7" if BR2_LINUX_2_6_21_7
+ default "2.6.22.1" if BR2_LINUX_2_6_22_1
+ default "2.6.22.10" if BR2_LINUX_2_6_22_10
+ default "$(BR2_KERNEL_CURRENT_VERSION)"if BR2_LINUX_2_6_STABLE
+ default $(BR2_CUSTOM_LINUX26_VERSION) if BR2_LINUX26_CUSTOM
+
+menu "Linux Kernel Configuration"
+
+choice
+ prompt "Linux Kernel Configuration"
+ depends on BR2_PACKAGE_LINUX
+ default BR2_PACKAGE_LINUX_USE_KCONFIG
+ help
+ Select the way to configure the Linux
+
+config BR2_PACKAGE_LINUX_USE_KCONFIG
+ bool ".config file"
+ depends on BR2_PACKAGE_LINUX
+ help
+ kernel's .config to use to build a kernel for the target.
+
+ If the above setting is empty, you can change the default
+ board-imposed value by passing LINUX26_KCONFIG=<path> to
+ make.
+
+config BR2_PACKAGE_LINUX_USE_DEFCONFIG
+ bool "Run make <board>_defconfig "
+ depends BR2_PACKAGE_LINUX
+ help
+ Configure Linux by make <board>_defconfig
+
+config BR2_PACKAGE_LINUX_USE_XCONFIG
+ bool "Run make ARCH=$(ARCH) xconfig before build"
+ depends BR2_PACKAGE_LINUX
+ help
+ Configure Linux by make xconfig
+endchoice
+
+config BR2_PACKAGE_LINUX_KCONFIG
+ string ".config file"
+ depends on BR2_PACKAGE_LINUX_USE_KCONFIG
+ default "$(BR2_BOARD_PATH)/$(BR2_BOARD_NAME)-linux-$(BR2_LINUX26_VERSION).config"
+ help
+ kernel's .config to use to build a kernel for the target.
+
+ If the above setting is empty, you can change the default
+ board-imposed value by passing LINUX26_KCONFIG=<path> to
+ make.
+
+endmenu
+
+choice
+ prompt "kernel binary format"
+ depends on BR2_PACKAGE_LINUX
+ default BR2_LINUX_BIN_UIMAGE
+ help
+ Select the specific Linux binary type you want to use
+
+config BR2_LINUX_BIN_BZIMAGE
+ bool "bzImage"
+ depends BR2_PACKAGE_LINUX
+ help
+ Linux 2.6.19.2
+
+config BR2_LINUX_BIN_UIMAGE
+ bool "uImage"
+ depends BR2_PACKAGE_LINUX
+ help
+ Build uImage binary
+
+config BR2_LINUX_BIN_VMLINUX
+ bool "vmlinux"
+ depends BR2_PACKAGE_LINUX
+ help
+ Build vmlinux binary
+
+config BR2_LINUX_BIN_ZIMAGE
+ bool "zImage"
+ depends BR2_PACKAGE_LINUX
+ help
+ Linux 2.6.19.2
+
+config BR2_LINUX_BIN_CUSTOM
+ bool "<custom> Linux binary"
+ depends BR2_PACKAGE_LINUX
+ help
+ Build custom Linux binary format
+endchoice
+
+config BR2_LINUX_BIN_CUSTOM_BIN
+ string "custom kernel binary format"
+ depends on BR2_LINUX_BIN_CUSTOM
+ default ""
+ help
+ Which Linux binary format?
+
+config BR2_PACKAGE_LINUX_FORMAT
+ string #"kernel binary format"
+ depends on BR2_PACKAGE_LINUX
+ default "bzImage" if BR2_LINUX_BIN_BZIMAGE
+ default "uImage" if BR2_LINUX_BIN_UIMAGE
+ default "vmlinux" if BR2_LINUX_BIN_VMLINUX
+ default "zImage" if BR2_LINUX_BIN_ZIMAGE
+ default $(BR2_LINUX_BIN_CUSTOM_BIN) if BR2_LINUX_BIN_CUSTOM
+ help
+ kernel binary format.
+ Popular values include:
+ - bzImage
+ - zImage
+ - vmlinux
+ - zImage
+ - xipImage
+ and other, architecture dependant formats.
+
+ Note that the default format is supposed to be set by your
+ board-description, if any.
+ i386 and compatible default to bzImage if nothing was given
+ above.
+ If the above setting is empty, you can change the default
+ board-imposed value by passing LINUX26_FORMAT=<string> to
+ make.
+
+menu "Destinations for linux kernel binaries"
+
+config BR2_LINUX_COPYTO_ROOTFS
+ bool "Copy kernel to root file system"
+ depends BR2_PACKAGE_LINUX
+ default n
+ help
+ Copy kernel to <root>/boot directory
+
+config BR2_LINUX_COPYTO_TFTPBOOT
+ bool "Copy kernel to /tftpboot"
+ default y if BR2_TARGET_ATMEL
+ default n if !BR2_TARGET_ATMEL
+ help
+ Copy kernel to /tftpboot directory
+
+config BR2_LINUX_COPYTO
+ string "Copy kernel to <dir>..."
+ default ""
+ help
+ Copy kernel to secondary location
+
+endmenu
+
+config BR2_LINUX_COPY_CONFIGURATION
+ bool "Copy buildroot configuration to Linux file system"
+ default y if BR2_TARGET_ATMEL
+ default n if !BR2_TARGET_ATMEL
+ help
+ The configuration files for buildroot, uclibc, busybox and linux
+ are copied to the "<root>/boot" directory.
+
+endif
+
--- /dev/null
+if BR2_KERNEL_LINUX_EXPERIMENTAL
+
+choice
+ prompt "Linux Kernel Version"
+ depends on BR2_PACKAGE_LINUX
+ default BR2_LINUX_2_6_22_1 if !BR2_avr32
+ default BR2_LINUX_2_6_22_10 if BR2_avr32
+ help
+ Select the specific Linux version you want to use
+
+config BR2_LINUX_2_6_SNAP
+ bool "The latest snapshot for the stable Linux kernel"
+ depends BR2_PACKAGE_LINUX
+ help
+ Linux 2.6.x-git#
+
+config BR2_LINUX_2_6_MM
+ bool "With latest -mm patch for the stable Linux kernel"
+ depends BR2_PACKAGE_LINUX
+ help
+ Linux 2.6.x-rc#-mm#
+
+config BR2_LINUX_2_6_STABLE
+ bool "The latest stable Linux kernel (2.6.22.1)"
+ depends BR2_PACKAGE_LINUX
+ help
+ Linux 2.6.22.1
+
+config BR2_LINUX_2_6_22_10
+ bool "Linux 2.6.22.10"
+ depends BR2_PACKAGE_LINUX
+ help
+ Linux 2.6.22.10
+
+config BR2_LINUX_2_6_22_1
+ bool "Linux 2.6.22.1"
+ depends BR2_PACKAGE_LINUX
+ help
+ Linux 2.6.22.1
+
+config BR2_LINUX_2_6_22
+ bool "Linux 2.6.22"
+ depends BR2_PACKAGE_LINUX
+ help
+ Linux 2.6.22
+
+config BR2_LINUX_2_6_21_6
+ bool "Linux 2.6.21.6"
+ depends BR2_PACKAGE_LINUX
+ help
+ Linux 2.6.21.6
+
+config BR2_LINUX_2_6_21_1
+ bool "Linux 2.6.21.1"
+ depends BR2_PACKAGE_LINUX
+ help
+ Linux 2.6.21.1
+
+config BR2_LINUX_2_6_21
+ bool "Linux 2.6.21"
+ depends BR2_PACKAGE_LINUX
+ help
+ Linux 2.6.21
+
+config BR2_LINUX_2_6_20_4
+ bool "Linux 2.6.20.4"
+ depends BR2_PACKAGE_LINUX
+ help
+ Linux 2.6.20.4
+
+config BR2_LINUX_2_6_20
+ bool "Linux 2.6.20"
+ depends BR2_PACKAGE_LINUX
+ help
+ Linux 2.6.20
+
+config BR2_LINUX_2_6_19_2
+ bool "Linux 2.6.19.2"
+ depends BR2_PACKAGE_LINUX
+ help
+ Linux 2.6.19.2
+
+config BR2_LINUX_2_6_19
+ bool "Linux 2.6.19"
+ depends BR2_PACKAGE_LINUX
+ help
+ Linux 2.6.19
+
+config BR2_LINUX_2_6_18
+ bool "Linux 2.6.18"
+ depends BR2_PACKAGE_LINUX
+ help
+ Linux 2.6.18
+
+config BR2_LINUX_2_6_17
+ bool "Linux 2.6.17"
+ depends BR2_PACKAGE_LINUX
+ help
+ Linux 2.6.17
+
+config BR2_LINUX_2_6_16
+ bool "Linux 2.6.16"
+ depends BR2_PACKAGE_LINUX
+ help
+ Linux 2.6.16
+
+config BR2_LINUX_2_6_15
+ bool "Linux 2.6.15"
+ depends BR2_PACKAGE_LINUX
+ help
+ Linux 2.6.15
+
+config BR2_LINUX_2_6_23
+ bool "Linux 2.6.23"
+ depends BR2_PACKAGE_LINUX
+ help
+ Linux 2.6.23
+
+config BR2_LINUX_CUSTOM
+ bool "Linux <custom> version"
+ depends BR2_PACKAGE_LINUX
+ help
+ Linux <your selection>
+
+endchoice
+
+config BR2_CUSTOM_DOWNLOAD_LINUX26_VERSION
+ string "Linux Tarball version"
+ depends on BR2_LINUX_CUSTOM
+ default "linux-2.6.22"
+
+config BR2_CUSTOM_LINUX26_VERSION
+ string "Linux Version"
+ depends on BR2_LINUX_CUSTOM
+ default "linux-2.6.22-version"
+
+config BR2_CUSTOM_LINUX26_RC_PATCH
+ string "RC patch (if needed)"
+ depends on BR2_LINUX_CUSTOM
+ default "patch-2.6.22-rc6-mm1.bz2"
+
+menu "Patches"
+ depends on BR2_PACKAGE_LINUX
+
+config BR2_LINUX_BSP_PATCH
+ string "Additional patch to apply (supply full path)"
+ default ""
+
+endmenu
+
+config BR2_DOWNLOAD_LINUX26_VERSION
+ string #"Selected Tarball:"
+ default "2.6.15" if BR2_LINUX_2_6_15
+ default "2.6.16" if BR2_LINUX_2_6_16
+ default "2.6.17" if BR2_LINUX_2_6_17
+ default "2.6.18" if BR2_LINUX_2_6_18
+ default "2.6.19" if BR2_LINUX_2_6_19
+ default "2.6.19.2" if BR2_LINUX_2_6_19_2
+ default "2.6.20" if BR2_LINUX_2_6_20
+ default "2.6.20.4" if BR2_LINUX_2_6_20_4
+ default "2.6.21" if BR2_LINUX_2_6_21
+ default "2.6.21.1" if BR2_LINUX_2_6_21_1
+ default "2.6.21.6" if BR2_LINUX_2_6_21_6
+ default "2.6.22" if BR2_LINUX_2_6_22
+ default "2.6.22.1" if BR2_LINUX_2_6_22_1
+ default "2.6.22.10" if BR2_LINUX_2_6_22_10
+ default "2.6.22" if BR2_LINUX_2_6_23_RC1
+ default "2.6.22" if BR2_LINUX_2_6_SNAP
+ default "2.6.22" if BR2_LINUX_2_6_MM
+ default $(BR2_CUSTOM_DOWNLOAD_LINUX26_VERSION) if BR2_LINUX_CUSTOM
+
+config BR2_LINUX26_VERSION
+ string #"Selected Version:"
+ default "2.6.15" if BR2_LINUX_2_6_15
+ default "2.6.16" if BR2_LINUX_2_6_16
+ default "2.6.17" if BR2_LINUX_2_6_17
+ default "2.6.18" if BR2_LINUX_2_6_18
+ default "2.6.19" if BR2_LINUX_2_6_19
+ default "2.6.19.2" if BR2_LINUX_2_6_19_2
+ default "2.6.20" if BR2_LINUX_2_6_20
+ default "2.6.20.4" if BR2_LINUX_2_6_20_4
+ default "2.6.21" if BR2_LINUX_2_6_21
+ default "2.6.21.1" if BR2_LINUX_2_6_21_1
+ default "2.6.21.6" if BR2_LINUX_2_6_21_6
+ default "2.6.22" if BR2_LINUX_2_6_22
+ default "2.6.22.1" if BR2_LINUX_2_6_22_1
+ default "2.6.22.10" if BR2_LINUX_2_6_22_10
+ default "2.6.22" if BR2_LINUX_2_6_23_RC1
+ default "2.6.22" if BR2_LINUX_2_6_SNAP
+ default "2.6.22" if BR2_LINUX_2_6_MM
+ default $(BR2_CUSTOM_LINUX26_VERSION) if BR2_LINUX_CUSTOM
+
+config BR2_LINUX26_RC_PATCH
+ string #"Selected Patch:"
+ default "" if BR2_LINUX_2_6_15
+ default "" if BR2_LINUX_2_6_16
+ default "" if BR2_LINUX_2_6_17
+ default "" if BR2_LINUX_2_6_18
+ default "" if BR2_LINUX_2_6_19
+ default "" if BR2_LINUX_2_6_19_2
+ default "" if BR2_LINUX_2_6_20
+ default "" if BR2_LINUX_2_6_20_4
+ default "" if BR2_LINUX_2_6_21
+ default "" if BR2_LINUX_2_6_21_1
+ default "" if BR2_LINUX_2_6_21_6
+ default "" if BR2_LINUX_2_6_22
+ default "" if BR2_LINUX_2_6_22_1
+ default "" if BR2_LINUX_2_6_22_10
+ default "patch-2.6.23-rc1.bz2" if BR2_LINUX_2_6_23_RC1
+ default $(BR2_CUSTOM_LINUX26_RC_PATCH) if BR2_LINUX_CUSTOM
+
+choice
+ prompt "Linux Kernel Configuration"
+ depends on BR2_PACKAGE_LINUX
+ default BR2_PACKAGE_LINUX_USE_KCONFIG
+ help
+ Select the way to configure the Linux
+
+config BR2_PACKAGE_LINUX_USE_KCONFIG
+ bool ".config file"
+ depends on BR2_PACKAGE_LINUX
+ help
+ kernel's .config to use to build a kernel for the target.
+
+ If the above setting is empty, you can change the default
+ board-imposed value by passing LINUX26_KCONFIG=<path> to
+ make.
+
+config BR2_LINUX26_DEFCONFIG
+ bool "Run make <board>_defconfig "
+ depends BR2_PACKAGE_LINUX
+ help
+ Configure Linux by make <board>_defconfig
+
+config BR2_LINUX_CUSTOMIZE
+ bool "Run make ARCH=$(ARCH) xconfig before build"
+ depends BR2_PACKAGE_LINUX
+ help
+ Configure Linux by make xconfig
+endchoice
+
+config BR2_PACKAGE_LINUX_KCONFIG
+ string ".config file"
+ depends on BR2_PACKAGE_LINUX_USE_KCONFIG
+ default "$(BR2_BOARD_PATH)/$(BR2_BOARD_NAME)-linux-$(LINUX26_VERSION).config"
+ help
+ kernel's .config to use to build a kernel for the target.
+
+ If the above setting is empty, you can change the default
+ board-imposed value by passing LINUX26_KCONFIG=<path> to
+ make.
+
+choice
+ prompt "kernel binary format"
+ depends on BR2_PACKAGE_LINUX
+ default BR2_LINUX_BIN_UIMAGE
+ help
+ Select the specific Linux binary type you want to use
+
+config BR2_LINUX_BIN_BZIMAGE
+ bool "bzImage"
+ depends BR2_PACKAGE_LINUX
+ help
+ Linux 2.6.19.2
+
+config BR2_LINUX_BIN_UIMAGE
+ bool "uImage"
+ depends BR2_PACKAGE_LINUX
+ help
+ Build uImage binary
+
+config BR2_LINUX_BIN_VMLINUX
+ bool "vmlinux"
+ depends BR2_PACKAGE_LINUX
+ help
+ Build vmlinux binary
+
+config BR2_LINUX_BIN_ZIMAGE
+ bool "zImage"
+ depends BR2_PACKAGE_LINUX
+ help
+ Linux 2.6.19.2
+
+config BR2_LINUX_BIN_CUSTOM
+ bool "<custom> Linux binary"
+ depends BR2_PACKAGE_LINUX
+ help
+ Build custom Linux binary format
+endchoice
+
+config BR2_LINUX_BIN_CUSTOM_BIN
+ string "custom kernel binary format"
+ depends on BR2_LINUX_BIN_CUSTOM
+ default ""
+ help
+ Which Linux binary format?
+
+config BR2_PACKAGE_LINUX_FORMAT
+ string #"kernel binary format"
+ depends on BR2_PACKAGE_LINUX
+ default "bzImage" if BR2_LINUX_BIN_BZIMAGE
+ default "uImage" if BR2_LINUX_BIN_UIMAGE
+ default "vmlinux" if BR2_LINUX_BIN_VMLINUX
+ default "zImage" if BR2_LINUX_BIN_ZIMAGE
+ default $(BR2_LINUX_BIN_CUSTOM_BIN) if BR2_LINUX_BIN_CUSTOM
+ help
+ kernel binary format.
+ Popular values include:
+ - bzImage
+ - zImage
+ - vmlinux
+ - zImage
+ - xipImage
+ and other, architecture dependant formats.
+
+ Note that the default format is supposed to be set by your
+ board-description, if any.
+ i386 and compatible default to bzImage if nothing was given
+ above.
+ If the above setting is empty, you can change the default
+ board-imposed value by passing LINUX26_FORMAT=<string> to
+ make.
+
+comment "Destinations for linux kernel binaries"
+ depends on BR2_PACKAGE_LINUX
+
+config BR2_LINUX_IN_ROOTFS
+ bool "Copy kernel to root file system"
+ depends BR2_PACKAGE_LINUX
+ default n
+ help
+ Copy kernel to <root>/boot directory
+
+menuconfig BR2_LINUX_COPY
+ bool "Secondary Copy"
+ depends on BR2_PACKAGE_LINUX
+ default y
+
+config BR2_LINUX_COPYTO
+ string "also copy the image to..."
+ depends BR2_LINUX_COPY
+ default "/tftpboot"
+ help
+ Copy kernel to secondary location
+
+endif
--- /dev/null
+###############################################################################
+#
+# Linux kernel 2.6 target (Advanced configuration)
+#
+###############################################################################
+ifneq ($(filter $(TARGETS),linux26),)
+
+# -----------------------------------------------------------------------------
+# Make sure LINUX_HEADERS_VERSION is defined
+ifeq ($(LINUX_HEADERS_VERSION),)
+# We did not have headers (this is for real???)
+LINUX_HEADERS_VERSION:=2.6.22.1
+endif
+
+# -----------------------------------------------------------------------------
+# STRATEGY FOR DOWNLOAD_LINUX26_VERSION
+# 1. Use definition from user Makefile
+# 2. Use definition from Kconfig
+# 3. Use Linux Headers version
+# 4. Use default (2.6.22.1)
+ifeq ($(DOWNLOAD_LINUX26_VERSION),)
+ifneq ($(BR2_DOWNLOAD_LINUX26_VERSION),)
+DOWNLOAD_LINUX26_VERSION:=$(strip $(subst ",,$(BR2_DOWNLOAD_LINUX26_VERSION)))
+#"))
+else
+DOWNLOAD_LINUX26_VERSION:=$(LINUX_HEADERS_VERSION)
+endif
+endif
+
+# -----------------------------------------------------------------------------
+# STRATEGY FOR LINUX26_VERSION
+# 1. Use definition from user Makefile
+# 2. Use definition from Kconfig
+# 3. Use Linux Headers version
+# 4. Use default (2.6.22.1)
+ifeq ($(LINUX26_VERSION),)
+ifneq ($(BR2_LINUX26_VERSION),)
+LINUX26_VERSION:=$(strip $(subst ",,$(BR2_LINUX26_VERSION)))
+#"))
+else
+LINUX26_VERSION:=$(LINUX_HEADERS_VERSION)
+endif
+endif
+
+ifeq ($(BOARD_PATH),)
+BOARD_PATH:=$(strip $(subst ",,$(BR2_BOARD_PATH)))
+#"))
+endif
+
+# Version of Linux AFTER patches
+LINUX26_DIR:=$(PROJECT_BUILD_DIR)/linux-$(LINUX26_VERSION)
+
+# for packages that need it
+LINUX_VERSION:=$(LINUX26_VERSION)
+LINUX_DIR:=$(LINUX26_DIR)
+
+# -----------------------------------------------------------------------------
+# Define source name and sites
+LINUX26_SOURCE:=linux-$(DOWNLOAD_LINUX26_VERSION).tar.bz2
+LINUX26_SITE:=$(strip $(subst ",,$(BR2_KERNEL_SITE)))
+#"))
+
+LINUX26_PATCH_SOURCE:=$(strip $(subst ",,$(BR2_KERNEL_PATCH)))
+#"))
+LINUX26_PATCH_SITE:=$(strip $(subst ",,$(BR2_KERNEL_PATCH_SITE)))
+#"))
+
+LINUX26_BSP_PATCH:=$(strip $(subst ",,$(BR2_LINUX_BSP_PATCH)))
+#"))
+
+LINUX26_PATCH_SITE:=$(strip $(subst ",,$(BR2_KERNEL_SITE)))
+#"))
+
+# ------------------------------------
+# kernel patches provided by buildroot
+ifeq ($(strip $(LINUX26_PATCH_DIR)),)
+LINUX26_PATCH_DIR:=$(BOARD_PATH)/kernel-patches-$(LINUX26_VERSION)/
+endif
+
+# -----------------------------------------------------------------------------
+# Linux kernel configuration file
+# This is used if BR2_PACKAGE_LINUX_USE_KCONFIG is set
+# Has to be set by the target/device
+# If it is not set by the target/device, then pick the one from .config
+ifndef LINUX26_KCONFIG
+ifneq ($(strip $(subst ",,$(BR2_PACKAGE_LINUX_KCONFIG))),)
+LINUX26_KCONFIG:=$(strip $(subst ",,$(BR2_PACKAGE_LINUX_KCONFIG)))
+#"))
+#"))
+else
+ifeq ($(BR2_i386),y)
+LINUX26_KCONFIG:=$(BOARD_PATH)/linux26.config
+else
+LINUX26_KCONFIG:=$(BR2_BOARD_PATH)/$(BR2_BOARD_NAME)-linux-$(LINUX26_VERSION).config
+endif
+endif
+endif
+
+# -----------------------------------------------------------------------------
+ifndef LINUX26_FORMAT
+ifneq ($(strip $(subst ",,$(BR2_PACKAGE_LINUX_FORMAT))),)
+#"))
+LINUX26_FORMAT:=$(strip $(subst ",,$(BR2_PACKAGE_LINUX_FORMAT)))
+#"))
+else
+LINUX26_FORMAT:=zImage
+endif
+endif
+
+# -----------------------------------------------------------------------------
+# Has to be set by the target/device
+ifeq ($(LINUX26_BINLOC),)
+
+# --------------
+# VMLINUX
+ifeq ($(LINUX26_FORMAT),vmlinux)
+LINUX26_BINLOC:=$(LINUX26_FORMAT)
+KERNEL_EXT:=
+endif
+
+# --------------
+# UIMAGE
+ifeq ($(LINUX26_FORMAT),uImage)
+ifeq ($(BR2_avr32),y)
+LINUX26_BINLOC:=arch/$(KERNEL_ARCH)/boot/images/$(LINUX26_FORMAT)
+else
+LINUX26_BINLOC:=arch/$(KERNEL_ARCH)/boot/$(LINUX26_FORMAT)
+endif
+KERNEL_EXT:=.gz
+endif
+
+# --------------
+# ZIMAGE
+ifeq ($(LINUX26_FORMAT),zImage)
+LINUX26_BINLOC:=arch/$(KERNEL_ARCH)/boot/$(LINUX26_FORMAT)
+KERNEL_EXT:=.z
+endif
+
+# --------------
+# BZIMAGE
+ifeq ($(LINUX26_FORMAT),bzImage)
+LINUX26_BINLOC:=arch/$(KERNEL_ARCH)/boot/$(LINUX26_FORMAT)
+KERNEL_EXT:=.bz
+endif
+
+endif
+
+# -----------------------------------------------------------------------------
+# File name for the Linux kernel binary
+LINUX_KERNEL_NAME:=$(BOARD_NAME)-linux-$(LINUX26_VERSION)-$(DATE)$(KERNEL_EXT)
+
+ifndef LINUX26_KERNEL
+LINUX26_KERNEL:=$(BINARIES_DIR)/$(BOARD_NAME)-linux-$(LINUX26_VERSION)-$(DATE)$(KERNEL_EXT)
+endif
+
+# for packages that need it
+LINUX_KERNEL:=$(LINUX26_KERNEL)
+
+
+# -----------------------------------------------------------------------------
+LINUX26_BZCAT:=$(BZCAT)
+
+__LINUX26_NO_PIC=-fPIC -fpic -DPIC -fwrapv -ftrapv
+LINUX26_MAKE_FLAGS = HOSTCC="$(HOSTCC)" HOSTCFLAGS="$(HOSTCFLAGS)" \
+ ARCH=$(KERNEL_ARCH) \
+ CFLAGS_KERNEL="$(filter-out $(__LINUX26_NO_PIC),$(TARGET_CFLAGS))" \
+ INSTALL_MOD_PATH=$(TARGET_DIR) \
+ CROSS_COMPILE=$(KERNEL_CROSS) \
+ LDFLAGS="$(TARGET_LDFLAGS)" \
+ LZMA="$(LZMA)"
+
+# =============================================================================
+
+$(LINUX26_KCONFIG):
+ @if [ ! -f "$(LINUX26_KCONFIG)" ] ; then \
+ echo ""; \
+ echo "You should create a .config for your kernel"; \
+ echo "and install it as $(LINUX26_KCONFIG)"; \
+ echo ""; \
+ sleep 5; \
+ fi
+# =============================================================================
+ifneq ($(strip $(LINUX26_VERSION)),$(strip $(LINUX_HEADERS_VERSION)))
+$(DL_DIR)/$(LINUX26_SOURCE):
+ $(WGET) -P $(DL_DIR) $(LINUX26_SITE)/$(LINUX26_SOURCE)
+endif # ($(LINUX26_VERSION),$(LINUX_HEADERS_VERSION))
+
+ifneq ($(strip $(LINUX26_PATCH_SOURCE)),)
+$(DL_DIR)/$(LINUX26_PATCH_SOURCE):
+ $(WGET) -P $(DL_DIR) $(LINUX26_PATCH_SITE)/$(LINUX26_PATCH_SOURCE)
+endif
+
+$(LINUX26_DIR)/.unpacked: $(DL_DIR)/$(LINUX26_SOURCE)
+ rm -rf $(LINUX26_DIR)
+ @echo "*** Unpacking kernel source"
+ $(LINUX26_BZCAT) $(DL_DIR)/$(LINUX26_SOURCE) | tar -C $(PROJECT_BUILD_DIR) $(TAR_OPTIONS) -
+ifneq ($(DOWNLOAD_LINUX26_VERSION),$(LINUX26_VERSION))
+ # Rename the dir from the downloaded version to the AFTER patch version
+ mv -f $(PROJECT_BUILD_DIR)/linux-$(DOWNLOAD_LINUX26_VERSION) $(LINUX26_DIR)
+endif
+ touch $@
+
+
+# -----------------------------------------------------------------------------
+LINUX26_TARGETS+=$(LINUX26_KERNEL)
+
+ifeq ($(BR2_LINUX_COPYTO_ROOTFS),y)
+LINUX26_TARGETS+=$(TARGET_DIR)/boot/$(LINUX26_KERNEL_NAME)
+endif
+
+ifeq ($(BR2_LINUX_COPYTO_TFTPBOOT),y)
+LINUX26_TARGETS+=/tftpboot/$(LINUX26_KERNEL_NAME)
+endif
+
+ifneq ($(BR2_LINUX_COPYTO),)
+LINUX_COPYTO:=$(strip $(subst ",,$(BR2_LINUX_COPYTO)))
+#"))
+LINUX26_TARGETS+=$(LINUX_COPYTO)/$(LINUX26_KERNEL_NAME)
+endif
+
+ifneq ($(BR2_LINUX_COPY_CONFIGURATION),)
+LINUX26_TARGETS+=$(TARGET_DIR)/boot/buildroot.config
+LINUX26_TARGETS+=$(TARGET_DIR)/boot/linux-$(LINUX26_VERSION).config
+LINUX26_TARGETS+=$(TARGET_DIR)/boot/uclibc.config
+ifeq ($(BR2_PACKAGE_BUSYBOX),y)
+LINUX26_TARGETS+=$(TARGET_DIR)/boot/busybox.config
+endif
+endif
+# -----------------------------------------------------------------------------
+
+$(LINUX26_DIR)/.patched: $(LINUX26_DIR)/.unpacked $(LINUX_HEADERS_DEPENDS)
+ifneq ($(LINUX26_PATCH_SOURCE),)
+ toolchain/patch-kernel.sh $(LINUX26_DIR) $(DL_DIR) $(LINUX26_PATCH_SOURCE)
+endif
+ifneq ($(LINUX26_BSP_PATCH),)
+ toolchain/patch-kernel.sh $(LINUX26_DIR) $(DL_DIR) $(LINUX26_BSP_PATCH)
+endif
+ toolchain/patch-kernel.sh $(LINUX26_DIR) toolchain/kernel-headers \
+ linux-$(LINUX26_VERSION)-\*.patch{,.gz,.bz2}
+ifeq ($(BR2_KERNEL_HEADERS_IPMI),y)
+ toolchain/patch-kernel.sh $(LINUX26_DIR) toolchain/kernel-headers/ipmi \
+ linux-$(LINUX26_VERSION)-\*.patch{,.gz,.bz2}
+endif
+ifeq ($(BR2_KERNEL_HEADERS_LZMA),y)
+ toolchain/patch-kernel.sh $(LINUX26_DIR) toolchain/kernel-headers/lzma \
+ linux-$(LINUX26_VERSION)-\*.patch{,.gz,.bz2}
+endif
+ifeq ($(BR2_KERNEL_HEADERS_RT),y)
+ toolchain/patch-kernel.sh $(LINUX26_DIR) $(DL_DIR) $(LINUX_RT_SOURCE)
+endif
+ifeq ($(BR2_KERNEL_HEADERS_PATCH_DIR),y)
+ if [ -d $(KERNEL_HEADERS_PATCH_DIR) ] ; then \
+ toolchain/patch-kernel.sh $(LINUX26_DIR) $(KERNEL_HEADERS_PATCH_DIR) \
+ linux-$(LINUX26_VERSION)-\*.patch{,.gz,.bz2} \
+ fi
+endif
+ifeq ($(BR2_PACKAGE_OPENSWAN),y)
+ toolchain/patch-kernel.sh $(LINUX26_DIR) package/openswan \
+ linux-$(LINUX26_VERSION)-\*.patch{,.gz,.bz2}
+endif
+ifneq ($(LINUX26_PATCH_DIR),)
+ if [ -d $(LINUX26_PATCH_DIR) ] ; then \
+ toolchain/patch-kernel.sh $(LINUX26_DIR) $(LINUX26_PATCH_DIR) linux-$(LINUX26_VERSION)-\*.patch ; \
+ fi
+endif
+ touch $@
+
+# -----------------------------------------------------------------------------
+$(LINUX26_DIR)/.configured: $(LINUX26_DIR)/.patched $(LINUX26_KCONFIG)
+ifeq ($(BR2_PACKAGE_LINUX_USE_DEFCONFIG),y)
+ $(MAKE) $(LINUX26_MAKE_FLAGS) -C $(LINUX26_DIR) $(BOARD_NAME)_defconfig
+endif
+ifeq ($(BR2_PACKAGE_LINUX_USE_XCONFIG),y)
+ $(MAKE) $(LINUX26_MAKE_FLAGS) -C $(LINUX26_DIR) xconfig
+endif
+ifeq ($(BR2_PACKAGE_LINUX_USE_KCONFIG),y)
+ cp -dpf $(LINUX26_KCONFIG) $(LINUX26_DIR)/.config
+endif
+ $(SED) '/CONFIG_AEABI=y/d' $(LINUX26_DIR)/.config
+ifeq ($(BR2_ARM_EABI),y)
+ echo "CONFIG_AEABI=y" >> $(LINUX26_DIR)/.config
+ $(SED) '/CONFIG_OABI_COMPAT/d' $(LINUX26_DIR)/.config
+ echo "# CONFIG_OABI_COMPAT is not set" >> $(LINUX26_DIR)/.config
+else
+ echo "# CONFIG_AEABI is not set" >> $(LINUX26_DIR)/.config
+endif
+ $(SED) '/CONFIG_IPV6=y/d' $(LINUX26_DIR)/.config
+ifeq ($(BR2_INET_IPV6),y)
+ echo "CONFIG_IPV6=y" >> $(LINUX26_DIR)/.config
+else
+ echo "# CONFIG_IPV6 is not set" >> $(LINUX26_DIR)/.config
+endif
+ $(SED) '/CONFIG_INITRAMFS_SOURCE/d' $(LINUX26_DIR)/.config
+ $(SED) '/INITRAMFS_ROOT_.ID/d' $(LINUX26_DIR)/.config
+ifeq ($(BR2_TARGET_ROOTFS_INITRAMFS),y)
+ echo "CONFIG_INITRAMFS_SOURCE=\"$(INITRAMFS_TARGET)\"" >> \
+ $(LINUX26_DIR)/.config
+ echo "CONFIG_INITRAMFS_ROOT_UID=0" >> $(LINUX26_DIR)/.config
+ echo "CONFIG_INITRAMFS_ROOT_GID=0" >> $(LINUX26_DIR)/.config
+else
+ echo "CONFIG_INITRAMFS_SOURCE=\"\"" >> $(LINUX26_DIR)/.config
+endif
+ifeq ($(BR2_PACKAGE_BUSYBOX_INITRAMFS),y)
+ # precedence for a small initramfs
+ $(SED) '/CONFIG_INITRAMFS_SOURCE/d' $(LINUX26_DIR)/.config
+ $(SED) '/INITRAMFS_ROOT_.ID/d' $(LINUX26_DIR)/.config
+ echo "CONFIG_INITRAMFS_SOURCE=\"$(BB_INITRAMFS_TARGET)\"" >> \
+ $(LINUX26_DIR)/.config
+ echo "CONFIG_INITRAMFS_ROOT_UID=0" >> $(LINUX26_DIR)/.config
+ echo "CONFIG_INITRAMFS_ROOT_GID=0" >> $(LINUX26_DIR)/.config
+endif
+ $(MAKE) $(LINUX26_MAKE_FLAGS) -C $(LINUX26_DIR) oldconfig
+ touch $@
+
+# -----------------------------------------------------------------------------
+$(LINUX26_DIR)/.depend_done: $(LINUX26_DIR)/.configured
+ $(MAKE) $(LINUX26_MAKE_FLAGS) -C $(LINUX26_DIR) prepare
+ touch $@
+
+$(LINUX26_KERNEL): $(INITRAMFS_TARGET) $(BB_INITRAMFS_TARGET) \
+ $(LINUX26_DIR)/.depend_done
+ $(MAKE) $(LINUX26_MAKE_FLAGS) \
+ -C $(LINUX26_DIR) $(LINUX26_FORMAT)
+ cp -dpf $(LINUX26_DIR)/$(LINUX26_BINLOC) $(LINUX26_KERNEL)
+ touch -c $@
+
+# -----------------------------------------------------------------------------
+$(TARGET_DIR)/lib/modules/$(LINUX26_VERSION)/modules.dep: $(LINUX26_DIR)/.configured
+ rm -rf $(TARGET_DIR)/lib/modules/$(LINUX26_VERSION)
+ rm -f $(TARGET_DIR)/sbin/cardmgr
+ $(MAKE) $(LINUX26_MAKE_FLAGS) -C $(LINUX26_DIR) modules
+ $(MAKE) $(LINUX26_MAKE_FLAGS) -C $(LINUX26_DIR) \
+ DEPMOD=$(STAGING_DIR)/bin/$(GNU_TARGET_NAME)-depmod26 \
+ INSTALL_MOD_PATH=$(TARGET_DIR) modules_install
+ rm -f $(TARGET_DIR)/lib/modules/$(LINUX26_VERSION)/build
+ rm -f $(TARGET_DIR)/lib/modules/$(LINUX26_VERSION)/source
+ $(STAGING_DIR)/bin/$(GNU_TARGET_NAME)-depmod26 -b $(TARGET_DIR) $(LINUX_HEADERS_VERSION)
+ touch -c $@
+
+linux26-menuconfig: $(LINUX26_DIR)/.patched host-sed
+ [ -f $(LINUX26_DIR)/.config ] || cp $(LINUX26_KCONFIG) $(LINUX26_DIR)/.config
+ $(MAKE) $(LINUX26_MAKE_FLAGS) -C $(LINUX26_DIR) menuconfig
+ -[ -f $(LINUX26_DIR)/.config ] && touch $(LINUX26_DIR)/.configured
+
+linux26-xconfig: $(LINUX26_DIR)/.patched host-sed
+ [ -f $(LINUX26_DIR)/.config ] || cp $(LINUX26_KCONFIG) $(LINUX26_DIR)/.config
+ $(MAKE) $(LINUX26_MAKE_FLAGS) -C $(LINUX26_DIR) xconfig
+ -[ -f $(LINUX26_DIR)/.config ] && touch $(LINUX26_DIR)/.configured
+
+$(TARGET_DIR)/boot/$(LINUX26_KERNEL_NAME): $(LINUX26_KERNEL)
+ mkdir -p $(TARGET_DIR)/boot
+ cp -dpf $(LINUX26_KERNEL) $(TARGET_DIR)/boot/$(LINUX26_KERNEL_NAME)
+
+$(TARGET_DIR)/boot/buildroot.config: .config
+ mkdir -p $(TARGET_DIR)/boot
+ cp -dpf .config $(TARGET_DIR)/boot/buildroot.config
+
+$(TARGET_DIR)/boot/linux-$(LINUX26_VERSION).config: $(LINUX26_DIR)/.config
+ mkdir -p $(TARGET_DIR)/boot
+ cp -dpf $(LINUX26_DIR)/.config $(TARGET_DIR)/boot/linux-$(LINUX26_VERSION).config
+
+$(TARGET_DIR)/boot/uclibc.config: .$(UCLIBC_DIR)/.config
+ mkdir -p $(TARGET_DIR)/boot
+ cp -dpf $(UCLIBC_DIR)/.config $(TARGET_DIR)/boot/uclibc.config
+
+$(TARGET_DIR)/boot/busybox.config: $(BUSYBOX_DIR)/.config
+ mkdir -p $(TARGET_DIR)/boot
+ cp -dpf .config $(TARGET_DIR)/boot/busybox.config
+
+/tftpboot/$(LINUX_KERNEL_NAME): $(LINUX26_KERNEL)
+ mkdir -p /tftpboot
+ cp -dpf $(LINUX26_KERNEL) /tftpboot/$(LINUX_KERNEL_NAME)
+
+$(LINUX_COPYTO)/$(LINUX26_KERNEL_NAME): $(LINUX26_KERNEL)
+ mkdir -p $(LINUX_COPYTO)
+ cp -dpf $(LINUX26_KERNEL) $(LINUX_COPYTO)/$(LINUX_KERNEL_NAME)
+
+linux26: $(LINUX26_TARGETS)
+
+$(LINUX26_DIR)/.modules_installed: $(TARGET_DIR)/lib/modules/$(LINUX26_VERSION)/modules.dep
+ touch $@
+
+linux26-modules: cross-depmod26 $(LINUX26_DIR)/.modules_installed
+
+linux26-source: $(DL_DIR)/$(LINUX26_SOURCE)
+
+linux26-unpacked: $(LINUX26_DIR)/.patched
+
+linux26-config: host-sed $(LINUX26_DIR)/.configured
+
+linux26-update:
+ cp -dpf $(LINUX26_DIR)/.config $(LINUX26_KCONFIG)
+
+# This has been renamed so we do _NOT_ by default run this on 'make clean'
+linux26clean:
+ rm -f $(LINUX26_KERNEL) $(LINUX26_DIR)/.configured
+ -$(MAKE) PATH=$(TARGET_PATH) -C $(LINUX26_DIR) clean
+
+linux26-dirclean:
+ rm -rf $(LINUX26_DIR)
+
+linux-status:
+ @echo PROJECT_BUILD_DIR=$(PROJECT_BUILD_DIR)
+ @echo BOARD_NAME=$(BOARD_NAME)
+ @echo BR2_BOARD_PATH=$(BR2_BOARD_PATH)
+ @echo DOWNLOAD_LINUX26_VERSION=$(DOWNLOAD_LINUX26_VERSION)
+ @echo LINUX26_VERSION=$(LINUX26_VERSION)
+ @echo LINUX26_SOURCE=$(LINUX26_SOURCE)
+ @echo LINUX26_DIR=$(LINUX26_DIR)
+ @echo TARGETS=$(TARGETS)
+ @echo LINUX26_HEADERS_PATCH_DIR=$(LINUX26_HEADERS_PATCH_DIR)
+ @echo LINUX26_BINLOC=$(LINUX26_BINLOC)
+ @echo LINUX26_FORMAT=$(LINUX26_FORMAT)
+ @echo LINUX26_KERNEL=$(LINUX26_KERNEL)
+ @echo BR2_KERNEL_SITE=$(BR2_KERNEL_SITE)
+ @echo BR2_KERNEL_PATCH_SITE=$(BR2_KERNEL_PATCH_SITE)
+ @echo BR2_KERNEL_PATCH=$(BR2_KERNEL_PATCH)
+ @echo BR2_LINUX26_CUSTOM=$(BR2_LINUX26_CUSTOM)
+ @echo BR2_CUSTOM_LINUX26_PATCH_SITE=$(BR2_CUSTOM_LINUX26_PATCH_SITE)
+ @echo BR2_CUSTOM_LINUX26_PATCH=$(BR2_CUSTOM_LINUX26_PATCH)
+ @echo BR2_LINUX_BSP_PATCH=$(BR2_LINUX_BSP_PATCH)
+ @echo BR2_PACKAGE_LINUX_USE_KCONFIG=$(BR2_PACKAGE_LINUX_USE_KCONFIG)
+ @echo BR2_PACKAGE_LINUX_USE_DEFCONFIG=$(BR2_PACKAGE_LINUX_USE_DEFCONFIG)
+ @echo BR2_PACKAGE_LINUX_USE_XCONFIG=$(BR2_PACKAGE_LINUX_USE_XCONFIG)
+ @echo BR2_PACKAGE_LINUX_KCONFIG=$(BR2_PACKAGE_LINUX_KCONFIG)
+ @echo BR2_LINUX_COPYTO_ROOTFS=$(BR2_LINUX_COPYTO_ROOTFS)
+ @echo BR2_LINUX_COPYTO_TFTPBOOT=$(BR2_LINUX_COPYTO_TFTPBOOT=)
+ @echo BR2_LINUX_COPYTO=$(BR2_LINUX_COPYTO)
+ @echo BR2_KERNEL_MINORLEVEL=$(BR2_KERNEL_MINORLEVEL)
+ @echo LINUX26_LATEST_RC_PATCH=$(LINUX26_LATEST_RC_PATCH)
+ @echo BR2_KERNEL_RC_LEVEL=$(BR2_KERNEL_RC_LEVEL)
+ @echo LINUX26_LATEST_MM_PATCH=$(LINUX26_LATEST_MM_PATCH)
+ @echo BR2_KERNEL_MM_LEVEL=$(BR2_KERNEL_MM_LEVEL)
+ @echo LINUX26_LATEST_GIT_PATCH=$(LINUX26_LATEST_GIT_PATCH)
+ @echo BR2_KERNEL_GIT_LEVEL=$(BR2_KERNEL_GIT_LEVEL)
+
+
+endif
projects / buildroot.git / commitdiff