libiberty_topdir = @libiberty_topdir@
srcdir = @srcdir@
-top_builddir = .
-
-enable_shared = @enable_shared@
-
prefix = @prefix@
exec_prefix = @exec_prefix@
INSTALL_DATA = @INSTALL_DATA@
mkinstalldirs = $(SHELL) $(libiberty_topdir)/mkinstalldirs
+# Some compilers can't handle cc -c blah.c -o foo/blah.o.
+OUTPUT_OPTION = @OUTPUT_OPTION@
+
AR = @AR@
AR_FLAGS = rc
RANLIB = @RANLIB@
MAKEINFO = @MAKEINFO@
PERL = @PERL@
-LIBTOOL = @LIBTOOL@
PICFLAG =
MAKEOVERRIDES =
TARGETLIB = ./libiberty.a
-LTTARGETLIB = ./libiberty.la
-PREFIXTARGETLIB= ./libiberty
TESTLIB = ./testlib.a
-LTTESTLIB = ./testlib.la
-PREFIXTESTLIB = ./testlib
LIBOBJS = @LIBOBJS@
-LTLIBOBJS = @LTLIBOBJS@
# A configuration can specify extra .o files that should be included,
# even if they are in libc. (Perhaps the libc version is buggy.)
EXTRA_OFILES =
-EXTRA_LTOFILES =
# Flags to pass to a recursive make.
FLAGS_TO_PASS = \
"DESTDIR=$(DESTDIR)" \
"LIBCFLAGS=$(LIBCFLAGS)" \
"EXTRA_OFILES=$(EXTRA_OFILES)" \
- "EXTRA_LTOFILES=$(EXTRA_LTOFILES)" \
"HDEFINES=$(HDEFINES)" \
"INSTALL=$(INSTALL)" \
"INSTALL_DATA=$(INSTALL_DATA)" \
SUBDIRS = testsuite
# FIXME: add @BUILD_INFO@ once we're sure it works for everyone.
-all: $(TARGETLIB) needed-list required-list all-subdir
+all: stamp-picdir $(TARGETLIB) needed-list required-list all-subdir
@: $(MAKE) ; exec $(MULTIDO) $(FLAGS_TO_PASS) multi-do DO=all
.PHONY: check installcheck
INCDIR=$(srcdir)/$(MULTISRCTOP)../include
COMPILE.c = $(CC) -c @DEFS@ $(LIBCFLAGS) -I. -I$(INCDIR) $(HDEFINES) @ac_libiberty_warn_cflags@
-LTCOMPILE = $(LIBTOOL) --mode=compile $(COMPILE.c)
-CCLD = $(CC)
-LINK = $(LIBTOOL) --mode=link $(CCLD) $(CFLAGS)
# Just to make sure we don't use a built-in rule with VPATH
.c.o:
false
-.c.lo:
- false
-
# NOTE: If you add new files to the library, add them to this list
-# (alphabetical), and add them to REQUIRED_OFILES/REQUIRED_LTOFILES, or
-# CONFIGURED_OFILES/CONFIGURED_LTOFILES and funcs in configure.ac.
-# Also run "make maint-deps" to build the new rules.
+# (alphabetical), and add them to REQUIRED_OFILES, or
+# CONFIGURED_OFILES and funcs in configure.ac. Also run "make maint-deps"
+# to build the new rules.
CFILES = alloca.c argv.c asprintf.c atexit.c \
basename.c bcmp.c bcopy.c bsearch.c bzero.c \
calloc.c choose-temp.c clock.c concat.c cp-demangle.c \
./ternary.o \
./xatexit.o ./xexit.o ./xmalloc.o ./xmemdup.o ./xstrdup.o \
./xstrerror.o
-REQUIRED_LTOFILES = ./regex.lo ./cplus-dem.lo ./cp-demangle.lo ./md5.lo \
- ./alloca.lo ./argv.lo \
- ./choose-temp.lo ./concat.lo ./cp-demint.lo \
- ./dyn-string.lo \
- ./fdmatch.lo ./fibheap.lo ./floatformat.lo ./fnmatch.lo \
- ./getopt.lo ./getopt1.lo ./getpwd.lo ./getruntime.lo \
- ./hashtab.lo ./hex.lo \
- ./lbasename.lo ./lrealpath.lo \
- ./make-relative-prefix.lo ./make-temp-file.lo \
- ./objalloc.lo ./obstack.lo \
- ./partition.lo ./physmem.lo @ltpexecute@ \
- ./safe-ctype.lo ./sort.lo ./spaces.lo ./splay-tree.lo ./strerror.lo \
- ./strsignal.lo \
- ./ternary.lo \
- ./xatexit.lo ./xexit.lo ./xmalloc.lo ./xmemdup.lo ./xstrdup.lo \
- ./xstrerror.lo
# These are all the objects that configure may add to the library via
# $funcs or EXTRA_OFILES. This list exists here only for "make
./vasprintf.o ./vfork.o ./vfprintf.o ./vprintf.o ./vsnprintf.o \
./vsprintf.o \
./waitpid.o
-CONFIGURED_LTOFILES = ./asprintf.lo ./atexit.lo \
- ./basename.lo ./bcmp.lo ./bcopy.lo ./bsearch.lo ./bzero.lo \
- ./calloc.lo ./clock.lo ./copysign.lo \
- ./_doprnt.lo \
- ./ffs.lo \
- ./getcwd.lo ./getpagesize.lo \
- ./index.lo ./insque.lo \
- ./memchr.lo ./memcmp.lo ./memcpy.lo ./memmove.lo ./mempcpy.lo \
- ./memset.lo ./mkstemps.lo \
- ./pex-djgpp.lo ./pex-mpw.lo ./pex-msdos.lo ./pex-os2.lo \
- ./pex-unix.lo ./pex-win32.lo \
- ./putenv.lo \
- ./random.lo ./rename.lo ./rindex.lo \
- ./setenv.lo ./sigsetmask.lo ./snprintf.lo ./stpcpy.lo ./stpncpy.lo \
- ./strcasecmp.lo ./strchr.lo ./strdup.lo ./strncasecmp.lo \
- ./strncmp.lo ./strrchr.lo ./strstr.lo \
- ./strtod.lo ./strtol.lo ./strtoul.lo \
- ./tmpnam.lo \
- ./vasprintf.lo ./vfork.lo ./vfprintf.lo ./vprintf.lo ./vsnprintf.lo \
- ./vsprintf.lo \
- ./waitpid.lo
# These files are installed if the library has been configured to do so.
INSTALLED_HEADERS = \
$(INCDIR)/splay-tree.h \
$(INCDIR)/ternary.h
-# FIXME: Libtool has to be used to create static and shared libraries
-# if it is used to compile object files. Since libiberty doesn't really
-# build shared library, we have to create the libraries we need by hand
-# and remove those created by libtool.
-$(TARGETLIB): $(REQUIRED_LTOFILES) $(EXTRA_LTOFILES) $(LTLIBOBJS)
- libtooldir=`$(LIBTOOL) --config | sed -n -e 's/^objdir=//p'`; \
- rm -f $(TARGETLIB) $$libtooldir/$(TARGETLIB) pic/$(TARGETLIB) \
- || true; \
- $(LINK) -o $(LTTARGETLIB) -rpath $(libdir) \
- $(REQUIRED_LTOFILES) $(EXTRA_LTOFILES) $(LTLIBOBJS); \
- if [ -f $$libtooldir/$(TARGETLIB) ]; then \
- cp $$libtooldir/$(TARGETLIB) $(TARGETLIB).tmp; \
- $(RANLIB) $(TARGETLIB).tmp; \
- $(SHELL) $(srcdir)/../move-if-change \
- $(TARGETLIB).tmp $(TARGETLIB); \
- else true; fi; \
- rm -f $(LTTARGETLIB) $$libtooldir/$(PREFIXTARGETLIB)*; \
- if [ x$(enable_shared) = xyes ]; then \
- cd $$libtooldir; \
+$(TARGETLIB): $(REQUIRED_OFILES) $(EXTRA_OFILES) $(LIBOBJS)
+ -rm -f $(TARGETLIB) pic/$(TARGETLIB)
+ $(AR) $(AR_FLAGS) $(TARGETLIB) \
+ $(REQUIRED_OFILES) $(EXTRA_OFILES) $(LIBOBJS)
+ $(RANLIB) $(TARGETLIB)
+ if [ x"$(PICFLAG)" != x ]; then \
+ cd pic; \
$(AR) $(AR_FLAGS) $(TARGETLIB) \
$(REQUIRED_OFILES) $(EXTRA_OFILES) $(LIBOBJS); \
$(RANLIB) $(TARGETLIB); \
- [ -d ../pic ] || mkdir ../pic; \
- rm -f ../pic/$(TARGETLIB); \
- cp $(TARGETLIB) ../pic/$(TARGETLIB); \
cd ..; \
else true; fi
-$(TESTLIB): $(REQUIRED_LTOFILES) $(CONFIGURED_LTOFILES)
- libtooldir=`$(LIBTOOL) --config | sed -n -e 's/^objdir=//p'`; \
- rm -f $(TESTLIB) $$libtooldir/$(TESTLIB) || true; \
- $(LINK) -o $(LTTESTLIB) -rpath $(libdir) \
- $(REQUIRED_LTOFILES) $(CONFIGURED_LTOFILES); \
- if [ -f $$libtooldir/$(TESTLIB) ]; then \
- cp $$libtooldir/$(TESTLIB) $(TESTLIB).tmp; \
- $(RANLIB) $(TESTLIB).tmp; \
- $(SHELL) $(srcdir)/../move-if-change \
- $(TESTLIB).tmp $(TESTLIB); \
- else true; fi; \
- rm -f $(LTTESTLIB) $$libtooldir/$(PREFIXTESTLIB)*
+$(TESTLIB): $(REQUIRED_OFILES) $(CONFIGURED_OFILES)
+ -rm -f $(TESTLIB)
+ $(AR) $(AR_FLAGS) $(TESTLIB) \
+ $(REQUIRED_OFILES) $(CONFIGURED_OFILES)
+ $(RANLIB) $(TESTLIB)
info: libiberty.info info-subdir
install-info: install-info-subdir
required-list: Makefile
echo $(REQUIRED_OFILES) > required-list
+stamp-picdir:
+ if [ x"$(PICFLAG)" != x ] && [ ! -d pic ]; then \
+ mkdir pic; \
+ else true; fi
+ touch stamp-picdir
+
.PHONY: all etags tags ls clean stage1 stage2
etags tags: TAGS etags-subdir
# Various targets for maintainers.
maint-missing :
- @$(PERL) $(srcdir)/maint-tool -s $(srcdir) missing $(CFILES) $(REQUIRED_LTOFILES) $(CONFIGURED_LTOFILES)
+ @$(PERL) $(srcdir)/maint-tool -s $(srcdir) missing $(CFILES) $(REQUIRED_OFILES) $(CONFIGURED_OFILES)
-maint-buildall : $(REQUIRED_LTOFILES) $(CONFIGURED_LTOFILES)
+maint-buildall : $(REQUIRED_OFILES) $(CONFIGURED_OFILES)
@true
maint-undoc : $(srcdir)/functions.texi
# Cleaning has to be done carefully to ensure that we don't clean our SUBDIRS
# multiple times, hence our explicit recursion with an empty SUBDIRS.
mostlyclean: mostlyclean-subdir
- -libtooldir=`$(LIBTOOL) --config | sed -n -e 's/^objdir=//p'`; \
- rm -f $$libtooldir
- -rm -rf *.o *.lo pic core errs \#* *.E a.out
+ -rm -rf *.o pic core errs \#* *.E a.out
-rm -f needed.awk needed2.awk errors dummy needed-list config.h stamp-*
- -rm -f $(CONFIG_H) $(NEEDED_LIST)
+ -rm -f $(CONFIG_H) $(NEEDED_LIST) stamp-picdir
-rm -f libiberty.aux libiberty.cp libiberty.cps libiberty.fn libiberty.ky
-rm -f libiberty.log libiberty.tmp libiberty.tps libiberty.pg
-rm -f libiberty.pgs libiberty.toc libiberty.tp libiberty.tpl libiberty.vr
cd $$dir && $(MAKE) $(FLAGS_TO_PASS) $$target; \
done
-# Don't export variables to the environment, in order to not confuse
-# configure.
-.NOEXPORT:
+$(REQUIRED_OFILES) $(EXTRA_OFILES) $(LIBOBJS): stamp-picdir
+$(CONFIGURED_OFILES): stamp-picdir
+
# The dependencies in the remainder of this file are automatically
# generated by "make maint-deps". Manual edits will be lost.
-./_doprnt.lo: $(srcdir)/_doprnt.c config.h $(INCDIR)/ansidecl.h \
+./_doprnt.o: $(srcdir)/_doprnt.c config.h $(INCDIR)/ansidecl.h \
$(INCDIR)/safe-ctype.h
- $(LTCOMPILE) -c -o $@ $(srcdir)/_doprnt.c
+ if [ x"$(PICFLAG)" != x ]; then \
+ $(COMPILE.c) $(PICFLAG) $(srcdir)/_doprnt.c -o pic/$@; \
+ else true; fi
+ $(COMPILE.c) $(srcdir)/_doprnt.c $(OUTPUT_OPTION)
-./alloca.lo: $(srcdir)/alloca.c config.h $(INCDIR)/ansidecl.h \
+./alloca.o: $(srcdir)/alloca.c config.h $(INCDIR)/ansidecl.h \
$(INCDIR)/libiberty.h
- $(LTCOMPILE) -c -o $@ $(srcdir)/alloca.c
+ if [ x"$(PICFLAG)" != x ]; then \
+ $(COMPILE.c) $(PICFLAG) $(srcdir)/alloca.c -o pic/$@; \
+ else true; fi
+ $(COMPILE.c) $(srcdir)/alloca.c $(OUTPUT_OPTION)
-./argv.lo: $(srcdir)/argv.c $(INCDIR)/ansidecl.h $(INCDIR)/libiberty.h
- $(LTCOMPILE) -c -o $@ $(srcdir)/argv.c
+./argv.o: $(srcdir)/argv.c $(INCDIR)/ansidecl.h $(INCDIR)/libiberty.h
+ if [ x"$(PICFLAG)" != x ]; then \
+ $(COMPILE.c) $(PICFLAG) $(srcdir)/argv.c -o pic/$@; \
+ else true; fi
+ $(COMPILE.c) $(srcdir)/argv.c $(OUTPUT_OPTION)
-./asprintf.lo: $(srcdir)/asprintf.c $(INCDIR)/ansidecl.h $(INCDIR)/libiberty.h
- $(LTCOMPILE) -c -o $@ $(srcdir)/asprintf.c
+./asprintf.o: $(srcdir)/asprintf.c $(INCDIR)/ansidecl.h $(INCDIR)/libiberty.h
+ if [ x"$(PICFLAG)" != x ]; then \
+ $(COMPILE.c) $(PICFLAG) $(srcdir)/asprintf.c -o pic/$@; \
+ else true; fi
+ $(COMPILE.c) $(srcdir)/asprintf.c $(OUTPUT_OPTION)
-./atexit.lo: $(srcdir)/atexit.c config.h
- $(LTCOMPILE) -c -o $@ $(srcdir)/atexit.c
+./atexit.o: $(srcdir)/atexit.c config.h
+ if [ x"$(PICFLAG)" != x ]; then \
+ $(COMPILE.c) $(PICFLAG) $(srcdir)/atexit.c -o pic/$@; \
+ else true; fi
+ $(COMPILE.c) $(srcdir)/atexit.c $(OUTPUT_OPTION)
-./basename.lo: $(srcdir)/basename.c $(INCDIR)/ansidecl.h $(INCDIR)/libiberty.h \
+./basename.o: $(srcdir)/basename.c $(INCDIR)/ansidecl.h $(INCDIR)/libiberty.h \
$(INCDIR)/safe-ctype.h
- $(LTCOMPILE) -c -o $@ $(srcdir)/basename.c
+ if [ x"$(PICFLAG)" != x ]; then \
+ $(COMPILE.c) $(PICFLAG) $(srcdir)/basename.c -o pic/$@; \
+ else true; fi
+ $(COMPILE.c) $(srcdir)/basename.c $(OUTPUT_OPTION)
-./bcmp.lo: $(srcdir)/bcmp.c
- $(LTCOMPILE) -c -o $@ $(srcdir)/bcmp.c
+./bcmp.o: $(srcdir)/bcmp.c
+ if [ x"$(PICFLAG)" != x ]; then \
+ $(COMPILE.c) $(PICFLAG) $(srcdir)/bcmp.c -o pic/$@; \
+ else true; fi
+ $(COMPILE.c) $(srcdir)/bcmp.c $(OUTPUT_OPTION)
-./bcopy.lo: $(srcdir)/bcopy.c
- $(LTCOMPILE) -c -o $@ $(srcdir)/bcopy.c
+./bcopy.o: $(srcdir)/bcopy.c
+ if [ x"$(PICFLAG)" != x ]; then \
+ $(COMPILE.c) $(PICFLAG) $(srcdir)/bcopy.c -o pic/$@; \
+ else true; fi
+ $(COMPILE.c) $(srcdir)/bcopy.c $(OUTPUT_OPTION)
-./bsearch.lo: $(srcdir)/bsearch.c config.h $(INCDIR)/ansidecl.h
- $(LTCOMPILE) -c -o $@ $(srcdir)/bsearch.c
+./bsearch.o: $(srcdir)/bsearch.c config.h $(INCDIR)/ansidecl.h
+ if [ x"$(PICFLAG)" != x ]; then \
+ $(COMPILE.c) $(PICFLAG) $(srcdir)/bsearch.c -o pic/$@; \
+ else true; fi
+ $(COMPILE.c) $(srcdir)/bsearch.c $(OUTPUT_OPTION)
-./bzero.lo: $(srcdir)/bzero.c
- $(LTCOMPILE) -c -o $@ $(srcdir)/bzero.c
+./bzero.o: $(srcdir)/bzero.c
+ if [ x"$(PICFLAG)" != x ]; then \
+ $(COMPILE.c) $(PICFLAG) $(srcdir)/bzero.c -o pic/$@; \
+ else true; fi
+ $(COMPILE.c) $(srcdir)/bzero.c $(OUTPUT_OPTION)
-./calloc.lo: $(srcdir)/calloc.c $(INCDIR)/ansidecl.h
- $(LTCOMPILE) -c -o $@ $(srcdir)/calloc.c
+./calloc.o: $(srcdir)/calloc.c $(INCDIR)/ansidecl.h
+ if [ x"$(PICFLAG)" != x ]; then \
+ $(COMPILE.c) $(PICFLAG) $(srcdir)/calloc.c -o pic/$@; \
+ else true; fi
+ $(COMPILE.c) $(srcdir)/calloc.c $(OUTPUT_OPTION)
-./choose-temp.lo: $(srcdir)/choose-temp.c config.h $(INCDIR)/ansidecl.h \
+./choose-temp.o: $(srcdir)/choose-temp.c config.h $(INCDIR)/ansidecl.h \
$(INCDIR)/libiberty.h
- $(LTCOMPILE) -c -o $@ $(srcdir)/choose-temp.c
+ if [ x"$(PICFLAG)" != x ]; then \
+ $(COMPILE.c) $(PICFLAG) $(srcdir)/choose-temp.c -o pic/$@; \
+ else true; fi
+ $(COMPILE.c) $(srcdir)/choose-temp.c $(OUTPUT_OPTION)
-./clock.lo: $(srcdir)/clock.c config.h
- $(LTCOMPILE) -c -o $@ $(srcdir)/clock.c
+./clock.o: $(srcdir)/clock.c config.h
+ if [ x"$(PICFLAG)" != x ]; then \
+ $(COMPILE.c) $(PICFLAG) $(srcdir)/clock.c -o pic/$@; \
+ else true; fi
+ $(COMPILE.c) $(srcdir)/clock.c $(OUTPUT_OPTION)
-./concat.lo: $(srcdir)/concat.c config.h $(INCDIR)/ansidecl.h \
+./concat.o: $(srcdir)/concat.c config.h $(INCDIR)/ansidecl.h \
$(INCDIR)/libiberty.h
- $(LTCOMPILE) -c -o $@ $(srcdir)/concat.c
+ if [ x"$(PICFLAG)" != x ]; then \
+ $(COMPILE.c) $(PICFLAG) $(srcdir)/concat.c -o pic/$@; \
+ else true; fi
+ $(COMPILE.c) $(srcdir)/concat.c $(OUTPUT_OPTION)
-./copysign.lo: $(srcdir)/copysign.c $(INCDIR)/ansidecl.h
- $(LTCOMPILE) -c -o $@ $(srcdir)/copysign.c
+./copysign.o: $(srcdir)/copysign.c $(INCDIR)/ansidecl.h
+ if [ x"$(PICFLAG)" != x ]; then \
+ $(COMPILE.c) $(PICFLAG) $(srcdir)/copysign.c -o pic/$@; \
+ else true; fi
+ $(COMPILE.c) $(srcdir)/copysign.c $(OUTPUT_OPTION)
-./cp-demangle.lo: $(srcdir)/cp-demangle.c config.h $(INCDIR)/ansidecl.h \
+./cp-demangle.o: $(srcdir)/cp-demangle.c config.h $(INCDIR)/ansidecl.h \
$(srcdir)/cp-demangle.h $(INCDIR)/demangle.h \
$(INCDIR)/dyn-string.h $(INCDIR)/getopt.h $(INCDIR)/libiberty.h
- $(LTCOMPILE) -c -o $@ $(srcdir)/cp-demangle.c
+ if [ x"$(PICFLAG)" != x ]; then \
+ $(COMPILE.c) $(PICFLAG) $(srcdir)/cp-demangle.c -o pic/$@; \
+ else true; fi
+ $(COMPILE.c) $(srcdir)/cp-demangle.c $(OUTPUT_OPTION)
-./cp-demint.lo: $(srcdir)/cp-demint.c config.h $(INCDIR)/ansidecl.h \
+./cp-demint.o: $(srcdir)/cp-demint.c config.h $(INCDIR)/ansidecl.h \
$(srcdir)/cp-demangle.h $(INCDIR)/demangle.h \
$(INCDIR)/libiberty.h
- $(LTCOMPILE) -c -o $@ $(srcdir)/cp-demint.c
+ if [ x"$(PICFLAG)" != x ]; then \
+ $(COMPILE.c) $(PICFLAG) $(srcdir)/cp-demint.c -o pic/$@; \
+ else true; fi
+ $(COMPILE.c) $(srcdir)/cp-demint.c $(OUTPUT_OPTION)
-./cplus-dem.lo: $(srcdir)/cplus-dem.c config.h $(INCDIR)/ansidecl.h \
+./cplus-dem.o: $(srcdir)/cplus-dem.c config.h $(INCDIR)/ansidecl.h \
$(INCDIR)/demangle.h $(INCDIR)/libiberty.h \
$(INCDIR)/safe-ctype.h
- $(LTCOMPILE) -c -o $@ $(srcdir)/cplus-dem.c
+ if [ x"$(PICFLAG)" != x ]; then \
+ $(COMPILE.c) $(PICFLAG) $(srcdir)/cplus-dem.c -o pic/$@; \
+ else true; fi
+ $(COMPILE.c) $(srcdir)/cplus-dem.c $(OUTPUT_OPTION)
-./dyn-string.lo: $(srcdir)/dyn-string.c config.h $(INCDIR)/ansidecl.h \
+./dyn-string.o: $(srcdir)/dyn-string.c config.h $(INCDIR)/ansidecl.h \
$(INCDIR)/dyn-string.h $(INCDIR)/libiberty.h
- $(LTCOMPILE) -c -o $@ $(srcdir)/dyn-string.c
+ if [ x"$(PICFLAG)" != x ]; then \
+ $(COMPILE.c) $(PICFLAG) $(srcdir)/dyn-string.c -o pic/$@; \
+ else true; fi
+ $(COMPILE.c) $(srcdir)/dyn-string.c $(OUTPUT_OPTION)
-./fdmatch.lo: $(srcdir)/fdmatch.c $(INCDIR)/ansidecl.h $(INCDIR)/libiberty.h
- $(LTCOMPILE) -c -o $@ $(srcdir)/fdmatch.c
+./fdmatch.o: $(srcdir)/fdmatch.c $(INCDIR)/ansidecl.h $(INCDIR)/libiberty.h
+ if [ x"$(PICFLAG)" != x ]; then \
+ $(COMPILE.c) $(PICFLAG) $(srcdir)/fdmatch.c -o pic/$@; \
+ else true; fi
+ $(COMPILE.c) $(srcdir)/fdmatch.c $(OUTPUT_OPTION)
-./ffs.lo: $(srcdir)/ffs.c
- $(LTCOMPILE) -c -o $@ $(srcdir)/ffs.c
+./ffs.o: $(srcdir)/ffs.c
+ if [ x"$(PICFLAG)" != x ]; then \
+ $(COMPILE.c) $(PICFLAG) $(srcdir)/ffs.c -o pic/$@; \
+ else true; fi
+ $(COMPILE.c) $(srcdir)/ffs.c $(OUTPUT_OPTION)
-./fibheap.lo: $(srcdir)/fibheap.c config.h $(INCDIR)/ansidecl.h \
+./fibheap.o: $(srcdir)/fibheap.c config.h $(INCDIR)/ansidecl.h \
$(INCDIR)/fibheap.h $(INCDIR)/libiberty.h
- $(LTCOMPILE) -c -o $@ $(srcdir)/fibheap.c
+ if [ x"$(PICFLAG)" != x ]; then \
+ $(COMPILE.c) $(PICFLAG) $(srcdir)/fibheap.c -o pic/$@; \
+ else true; fi
+ $(COMPILE.c) $(srcdir)/fibheap.c $(OUTPUT_OPTION)
-./floatformat.lo: $(srcdir)/floatformat.c config.h $(INCDIR)/ansidecl.h \
+./floatformat.o: $(srcdir)/floatformat.c config.h $(INCDIR)/ansidecl.h \
$(INCDIR)/floatformat.h $(INCDIR)/libiberty.h
- $(LTCOMPILE) -c -o $@ $(srcdir)/floatformat.c
+ if [ x"$(PICFLAG)" != x ]; then \
+ $(COMPILE.c) $(PICFLAG) $(srcdir)/floatformat.c -o pic/$@; \
+ else true; fi
+ $(COMPILE.c) $(srcdir)/floatformat.c $(OUTPUT_OPTION)
-./fnmatch.lo: $(srcdir)/fnmatch.c config.h $(INCDIR)/fnmatch.h \
+./fnmatch.o: $(srcdir)/fnmatch.c config.h $(INCDIR)/fnmatch.h \
$(INCDIR)/safe-ctype.h
- $(LTCOMPILE) -c -o $@ $(srcdir)/fnmatch.c
+ if [ x"$(PICFLAG)" != x ]; then \
+ $(COMPILE.c) $(PICFLAG) $(srcdir)/fnmatch.c -o pic/$@; \
+ else true; fi
+ $(COMPILE.c) $(srcdir)/fnmatch.c $(OUTPUT_OPTION)
-./getcwd.lo: $(srcdir)/getcwd.c config.h
- $(LTCOMPILE) -c -o $@ $(srcdir)/getcwd.c
+./getcwd.o: $(srcdir)/getcwd.c config.h
+ if [ x"$(PICFLAG)" != x ]; then \
+ $(COMPILE.c) $(PICFLAG) $(srcdir)/getcwd.c -o pic/$@; \
+ else true; fi
+ $(COMPILE.c) $(srcdir)/getcwd.c $(OUTPUT_OPTION)
-./getopt.lo: $(srcdir)/getopt.c config.h $(INCDIR)/getopt.h
- $(LTCOMPILE) -c -o $@ $(srcdir)/getopt.c
+./getopt.o: $(srcdir)/getopt.c config.h $(INCDIR)/getopt.h
+ if [ x"$(PICFLAG)" != x ]; then \
+ $(COMPILE.c) $(PICFLAG) $(srcdir)/getopt.c -o pic/$@; \
+ else true; fi
+ $(COMPILE.c) $(srcdir)/getopt.c $(OUTPUT_OPTION)
-./getopt1.lo: $(srcdir)/getopt1.c config.h $(INCDIR)/getopt.h
- $(LTCOMPILE) -c -o $@ $(srcdir)/getopt1.c
+./getopt1.o: $(srcdir)/getopt1.c config.h $(INCDIR)/getopt.h
+ if [ x"$(PICFLAG)" != x ]; then \
+ $(COMPILE.c) $(PICFLAG) $(srcdir)/getopt1.c -o pic/$@; \
+ else true; fi
+ $(COMPILE.c) $(srcdir)/getopt1.c $(OUTPUT_OPTION)
-./getpagesize.lo: $(srcdir)/getpagesize.c config.h
- $(LTCOMPILE) -c -o $@ $(srcdir)/getpagesize.c
+./getpagesize.o: $(srcdir)/getpagesize.c config.h
+ if [ x"$(PICFLAG)" != x ]; then \
+ $(COMPILE.c) $(PICFLAG) $(srcdir)/getpagesize.c -o pic/$@; \
+ else true; fi
+ $(COMPILE.c) $(srcdir)/getpagesize.c $(OUTPUT_OPTION)
-./getpwd.lo: $(srcdir)/getpwd.c config.h $(INCDIR)/ansidecl.h \
+./getpwd.o: $(srcdir)/getpwd.c config.h $(INCDIR)/ansidecl.h \
$(INCDIR)/libiberty.h
- $(LTCOMPILE) -c -o $@ $(srcdir)/getpwd.c
+ if [ x"$(PICFLAG)" != x ]; then \
+ $(COMPILE.c) $(PICFLAG) $(srcdir)/getpwd.c -o pic/$@; \
+ else true; fi
+ $(COMPILE.c) $(srcdir)/getpwd.c $(OUTPUT_OPTION)
-./getruntime.lo: $(srcdir)/getruntime.c config.h $(INCDIR)/ansidecl.h \
+./getruntime.o: $(srcdir)/getruntime.c config.h $(INCDIR)/ansidecl.h \
$(INCDIR)/libiberty.h
- $(LTCOMPILE) -c -o $@ $(srcdir)/getruntime.c
+ if [ x"$(PICFLAG)" != x ]; then \
+ $(COMPILE.c) $(PICFLAG) $(srcdir)/getruntime.c -o pic/$@; \
+ else true; fi
+ $(COMPILE.c) $(srcdir)/getruntime.c $(OUTPUT_OPTION)
-./hashtab.lo: $(srcdir)/hashtab.c config.h $(INCDIR)/ansidecl.h \
+./hashtab.o: $(srcdir)/hashtab.c config.h $(INCDIR)/ansidecl.h \
$(INCDIR)/hashtab.h $(INCDIR)/libiberty.h
- $(LTCOMPILE) -c -o $@ $(srcdir)/hashtab.c
+ if [ x"$(PICFLAG)" != x ]; then \
+ $(COMPILE.c) $(PICFLAG) $(srcdir)/hashtab.c -o pic/$@; \
+ else true; fi
+ $(COMPILE.c) $(srcdir)/hashtab.c $(OUTPUT_OPTION)
-./hex.lo: $(srcdir)/hex.c $(INCDIR)/ansidecl.h $(INCDIR)/libiberty.h \
+./hex.o: $(srcdir)/hex.c $(INCDIR)/ansidecl.h $(INCDIR)/libiberty.h \
$(INCDIR)/safe-ctype.h
- $(LTCOMPILE) -c -o $@ $(srcdir)/hex.c
+ if [ x"$(PICFLAG)" != x ]; then \
+ $(COMPILE.c) $(PICFLAG) $(srcdir)/hex.c -o pic/$@; \
+ else true; fi
+ $(COMPILE.c) $(srcdir)/hex.c $(OUTPUT_OPTION)
-./index.lo: $(srcdir)/index.c
- $(LTCOMPILE) -c -o $@ $(srcdir)/index.c
+./index.o: $(srcdir)/index.c
+ if [ x"$(PICFLAG)" != x ]; then \
+ $(COMPILE.c) $(PICFLAG) $(srcdir)/index.c -o pic/$@; \
+ else true; fi
+ $(COMPILE.c) $(srcdir)/index.c $(OUTPUT_OPTION)
-./insque.lo: $(srcdir)/insque.c
- $(LTCOMPILE) -c -o $@ $(srcdir)/insque.c
+./insque.o: $(srcdir)/insque.c
+ if [ x"$(PICFLAG)" != x ]; then \
+ $(COMPILE.c) $(PICFLAG) $(srcdir)/insque.c -o pic/$@; \
+ else true; fi
+ $(COMPILE.c) $(srcdir)/insque.c $(OUTPUT_OPTION)
-./lbasename.lo: $(srcdir)/lbasename.c $(INCDIR)/ansidecl.h $(INCDIR)/filenames.h \
+./lbasename.o: $(srcdir)/lbasename.c $(INCDIR)/ansidecl.h $(INCDIR)/filenames.h \
$(INCDIR)/libiberty.h $(INCDIR)/safe-ctype.h
- $(LTCOMPILE) -c -o $@ $(srcdir)/lbasename.c
+ if [ x"$(PICFLAG)" != x ]; then \
+ $(COMPILE.c) $(PICFLAG) $(srcdir)/lbasename.c -o pic/$@; \
+ else true; fi
+ $(COMPILE.c) $(srcdir)/lbasename.c $(OUTPUT_OPTION)
-./lrealpath.lo: $(srcdir)/lrealpath.c config.h $(INCDIR)/ansidecl.h \
+./lrealpath.o: $(srcdir)/lrealpath.c config.h $(INCDIR)/ansidecl.h \
$(INCDIR)/libiberty.h
- $(LTCOMPILE) -c -o $@ $(srcdir)/lrealpath.c
+ if [ x"$(PICFLAG)" != x ]; then \
+ $(COMPILE.c) $(PICFLAG) $(srcdir)/lrealpath.c -o pic/$@; \
+ else true; fi
+ $(COMPILE.c) $(srcdir)/lrealpath.c $(OUTPUT_OPTION)
-./make-relative-prefix.lo: $(srcdir)/make-relative-prefix.c config.h \
+./make-relative-prefix.o: $(srcdir)/make-relative-prefix.c config.h \
$(INCDIR)/ansidecl.h $(INCDIR)/libiberty.h
- $(LTCOMPILE) -c -o $@ $(srcdir)/make-relative-prefix.c
+ if [ x"$(PICFLAG)" != x ]; then \
+ $(COMPILE.c) $(PICFLAG) $(srcdir)/make-relative-prefix.c -o pic/$@; \
+ else true; fi
+ $(COMPILE.c) $(srcdir)/make-relative-prefix.c $(OUTPUT_OPTION)
-./make-temp-file.lo: $(srcdir)/make-temp-file.c config.h $(INCDIR)/ansidecl.h \
+./make-temp-file.o: $(srcdir)/make-temp-file.c config.h $(INCDIR)/ansidecl.h \
$(INCDIR)/libiberty.h
- $(LTCOMPILE) -c -o $@ $(srcdir)/make-temp-file.c
+ if [ x"$(PICFLAG)" != x ]; then \
+ $(COMPILE.c) $(PICFLAG) $(srcdir)/make-temp-file.c -o pic/$@; \
+ else true; fi
+ $(COMPILE.c) $(srcdir)/make-temp-file.c $(OUTPUT_OPTION)
-./md5.lo: $(srcdir)/md5.c config.h $(INCDIR)/ansidecl.h $(INCDIR)/md5.h
- $(LTCOMPILE) -c -o $@ $(srcdir)/md5.c
+./md5.o: $(srcdir)/md5.c config.h $(INCDIR)/ansidecl.h $(INCDIR)/md5.h
+ if [ x"$(PICFLAG)" != x ]; then \
+ $(COMPILE.c) $(PICFLAG) $(srcdir)/md5.c -o pic/$@; \
+ else true; fi
+ $(COMPILE.c) $(srcdir)/md5.c $(OUTPUT_OPTION)
-./memchr.lo: $(srcdir)/memchr.c $(INCDIR)/ansidecl.h
- $(LTCOMPILE) -c -o $@ $(srcdir)/memchr.c
+./memchr.o: $(srcdir)/memchr.c $(INCDIR)/ansidecl.h
+ if [ x"$(PICFLAG)" != x ]; then \
+ $(COMPILE.c) $(PICFLAG) $(srcdir)/memchr.c -o pic/$@; \
+ else true; fi
+ $(COMPILE.c) $(srcdir)/memchr.c $(OUTPUT_OPTION)
-./memcmp.lo: $(srcdir)/memcmp.c $(INCDIR)/ansidecl.h
- $(LTCOMPILE) -c -o $@ $(srcdir)/memcmp.c
+./memcmp.o: $(srcdir)/memcmp.c $(INCDIR)/ansidecl.h
+ if [ x"$(PICFLAG)" != x ]; then \
+ $(COMPILE.c) $(PICFLAG) $(srcdir)/memcmp.c -o pic/$@; \
+ else true; fi
+ $(COMPILE.c) $(srcdir)/memcmp.c $(OUTPUT_OPTION)
-./memcpy.lo: $(srcdir)/memcpy.c $(INCDIR)/ansidecl.h
- $(LTCOMPILE) -c -o $@ $(srcdir)/memcpy.c
+./memcpy.o: $(srcdir)/memcpy.c $(INCDIR)/ansidecl.h
+ if [ x"$(PICFLAG)" != x ]; then \
+ $(COMPILE.c) $(PICFLAG) $(srcdir)/memcpy.c -o pic/$@; \
+ else true; fi
+ $(COMPILE.c) $(srcdir)/memcpy.c $(OUTPUT_OPTION)
-./memmove.lo: $(srcdir)/memmove.c $(INCDIR)/ansidecl.h
- $(LTCOMPILE) -c -o $@ $(srcdir)/memmove.c
+./memmove.o: $(srcdir)/memmove.c $(INCDIR)/ansidecl.h
+ if [ x"$(PICFLAG)" != x ]; then \
+ $(COMPILE.c) $(PICFLAG) $(srcdir)/memmove.c -o pic/$@; \
+ else true; fi
+ $(COMPILE.c) $(srcdir)/memmove.c $(OUTPUT_OPTION)
-./mempcpy.lo: $(srcdir)/mempcpy.c $(INCDIR)/ansidecl.h
- $(LTCOMPILE) -c -o $@ $(srcdir)/mempcpy.c
+./mempcpy.o: $(srcdir)/mempcpy.c $(INCDIR)/ansidecl.h
+ if [ x"$(PICFLAG)" != x ]; then \
+ $(COMPILE.c) $(PICFLAG) $(srcdir)/mempcpy.c -o pic/$@; \
+ else true; fi
+ $(COMPILE.c) $(srcdir)/mempcpy.c $(OUTPUT_OPTION)
-./memset.lo: $(srcdir)/memset.c $(INCDIR)/ansidecl.h
- $(LTCOMPILE) -c -o $@ $(srcdir)/memset.c
+./memset.o: $(srcdir)/memset.c $(INCDIR)/ansidecl.h
+ if [ x"$(PICFLAG)" != x ]; then \
+ $(COMPILE.c) $(PICFLAG) $(srcdir)/memset.c -o pic/$@; \
+ else true; fi
+ $(COMPILE.c) $(srcdir)/memset.c $(OUTPUT_OPTION)
-./mkstemps.lo: $(srcdir)/mkstemps.c config.h $(INCDIR)/ansidecl.h
- $(LTCOMPILE) -c -o $@ $(srcdir)/mkstemps.c
+./mkstemps.o: $(srcdir)/mkstemps.c config.h $(INCDIR)/ansidecl.h
+ if [ x"$(PICFLAG)" != x ]; then \
+ $(COMPILE.c) $(PICFLAG) $(srcdir)/mkstemps.c -o pic/$@; \
+ else true; fi
+ $(COMPILE.c) $(srcdir)/mkstemps.c $(OUTPUT_OPTION)
-./mpw.lo: $(srcdir)/mpw.c
- $(LTCOMPILE) -c -o $@ $(srcdir)/mpw.c
+./mpw.o: $(srcdir)/mpw.c
+ if [ x"$(PICFLAG)" != x ]; then \
+ $(COMPILE.c) $(PICFLAG) $(srcdir)/mpw.c -o pic/$@; \
+ else true; fi
+ $(COMPILE.c) $(srcdir)/mpw.c $(OUTPUT_OPTION)
-./msdos.lo: $(srcdir)/msdos.c
- $(LTCOMPILE) -c -o $@ $(srcdir)/msdos.c
+./msdos.o: $(srcdir)/msdos.c
+ if [ x"$(PICFLAG)" != x ]; then \
+ $(COMPILE.c) $(PICFLAG) $(srcdir)/msdos.c -o pic/$@; \
+ else true; fi
+ $(COMPILE.c) $(srcdir)/msdos.c $(OUTPUT_OPTION)
-./objalloc.lo: $(srcdir)/objalloc.c config.h $(INCDIR)/ansidecl.h \
+./objalloc.o: $(srcdir)/objalloc.c config.h $(INCDIR)/ansidecl.h \
$(INCDIR)/objalloc.h
- $(LTCOMPILE) -c -o $@ $(srcdir)/objalloc.c
+ if [ x"$(PICFLAG)" != x ]; then \
+ $(COMPILE.c) $(PICFLAG) $(srcdir)/objalloc.c -o pic/$@; \
+ else true; fi
+ $(COMPILE.c) $(srcdir)/objalloc.c $(OUTPUT_OPTION)
-./obstack.lo: $(srcdir)/obstack.c config.h $(INCDIR)/obstack.h
- $(LTCOMPILE) -c -o $@ $(srcdir)/obstack.c
+./obstack.o: $(srcdir)/obstack.c config.h $(INCDIR)/obstack.h
+ if [ x"$(PICFLAG)" != x ]; then \
+ $(COMPILE.c) $(PICFLAG) $(srcdir)/obstack.c -o pic/$@; \
+ else true; fi
+ $(COMPILE.c) $(srcdir)/obstack.c $(OUTPUT_OPTION)
-./partition.lo: $(srcdir)/partition.c config.h $(INCDIR)/ansidecl.h \
+./partition.o: $(srcdir)/partition.c config.h $(INCDIR)/ansidecl.h \
$(INCDIR)/libiberty.h $(INCDIR)/partition.h
- $(LTCOMPILE) -c -o $@ $(srcdir)/partition.c
+ if [ x"$(PICFLAG)" != x ]; then \
+ $(COMPILE.c) $(PICFLAG) $(srcdir)/partition.c -o pic/$@; \
+ else true; fi
+ $(COMPILE.c) $(srcdir)/partition.c $(OUTPUT_OPTION)
-./pex-djgpp.lo: $(srcdir)/pex-djgpp.c config.h $(INCDIR)/ansidecl.h \
+./pex-djgpp.o: $(srcdir)/pex-djgpp.c config.h $(INCDIR)/ansidecl.h \
$(INCDIR)/libiberty.h $(srcdir)/pex-common.h
- $(LTCOMPILE) -c -o $@ $(srcdir)/pex-djgpp.c
+ if [ x"$(PICFLAG)" != x ]; then \
+ $(COMPILE.c) $(PICFLAG) $(srcdir)/pex-djgpp.c -o pic/$@; \
+ else true; fi
+ $(COMPILE.c) $(srcdir)/pex-djgpp.c $(OUTPUT_OPTION)
-./pex-mpw.lo: $(srcdir)/pex-mpw.c config.h $(INCDIR)/ansidecl.h \
+./pex-mpw.o: $(srcdir)/pex-mpw.c config.h $(INCDIR)/ansidecl.h \
$(INCDIR)/libiberty.h $(srcdir)/pex-common.h
- $(LTCOMPILE) -c -o $@ $(srcdir)/pex-mpw.c
+ if [ x"$(PICFLAG)" != x ]; then \
+ $(COMPILE.c) $(PICFLAG) $(srcdir)/pex-mpw.c -o pic/$@; \
+ else true; fi
+ $(COMPILE.c) $(srcdir)/pex-mpw.c $(OUTPUT_OPTION)
-./pex-msdos.lo: $(srcdir)/pex-msdos.c config.h $(INCDIR)/ansidecl.h \
+./pex-msdos.o: $(srcdir)/pex-msdos.c config.h $(INCDIR)/ansidecl.h \
$(INCDIR)/libiberty.h $(srcdir)/pex-common.h \
$(INCDIR)/safe-ctype.h
- $(LTCOMPILE) -c -o $@ $(srcdir)/pex-msdos.c
+ if [ x"$(PICFLAG)" != x ]; then \
+ $(COMPILE.c) $(PICFLAG) $(srcdir)/pex-msdos.c -o pic/$@; \
+ else true; fi
+ $(COMPILE.c) $(srcdir)/pex-msdos.c $(OUTPUT_OPTION)
-./pex-os2.lo: $(srcdir)/pex-os2.c config.h $(INCDIR)/ansidecl.h \
+./pex-os2.o: $(srcdir)/pex-os2.c config.h $(INCDIR)/ansidecl.h \
$(INCDIR)/libiberty.h $(srcdir)/pex-common.h
- $(LTCOMPILE) -c -o $@ $(srcdir)/pex-os2.c
+ if [ x"$(PICFLAG)" != x ]; then \
+ $(COMPILE.c) $(PICFLAG) $(srcdir)/pex-os2.c -o pic/$@; \
+ else true; fi
+ $(COMPILE.c) $(srcdir)/pex-os2.c $(OUTPUT_OPTION)
-./pex-unix.lo: $(srcdir)/pex-unix.c config.h $(INCDIR)/ansidecl.h \
+./pex-unix.o: $(srcdir)/pex-unix.c config.h $(INCDIR)/ansidecl.h \
$(INCDIR)/libiberty.h $(srcdir)/pex-common.h
- $(LTCOMPILE) -c -o $@ $(srcdir)/pex-unix.c
+ if [ x"$(PICFLAG)" != x ]; then \
+ $(COMPILE.c) $(PICFLAG) $(srcdir)/pex-unix.c -o pic/$@; \
+ else true; fi
+ $(COMPILE.c) $(srcdir)/pex-unix.c $(OUTPUT_OPTION)
-./pex-win32.lo: $(srcdir)/pex-win32.c config.h $(INCDIR)/ansidecl.h \
+./pex-win32.o: $(srcdir)/pex-win32.c config.h $(INCDIR)/ansidecl.h \
$(INCDIR)/libiberty.h $(srcdir)/pex-common.h
- $(LTCOMPILE) -c -o $@ $(srcdir)/pex-win32.c
+ if [ x"$(PICFLAG)" != x ]; then \
+ $(COMPILE.c) $(PICFLAG) $(srcdir)/pex-win32.c -o pic/$@; \
+ else true; fi
+ $(COMPILE.c) $(srcdir)/pex-win32.c $(OUTPUT_OPTION)
-./physmem.lo: $(srcdir)/physmem.c config.h $(INCDIR)/ansidecl.h \
+./physmem.o: $(srcdir)/physmem.c config.h $(INCDIR)/ansidecl.h \
$(INCDIR)/libiberty.h
- $(LTCOMPILE) -c -o $@ $(srcdir)/physmem.c
+ if [ x"$(PICFLAG)" != x ]; then \
+ $(COMPILE.c) $(PICFLAG) $(srcdir)/physmem.c -o pic/$@; \
+ else true; fi
+ $(COMPILE.c) $(srcdir)/physmem.c $(OUTPUT_OPTION)
-./putenv.lo: $(srcdir)/putenv.c config.h $(INCDIR)/ansidecl.h
- $(LTCOMPILE) -c -o $@ $(srcdir)/putenv.c
+./putenv.o: $(srcdir)/putenv.c config.h $(INCDIR)/ansidecl.h
+ if [ x"$(PICFLAG)" != x ]; then \
+ $(COMPILE.c) $(PICFLAG) $(srcdir)/putenv.c -o pic/$@; \
+ else true; fi
+ $(COMPILE.c) $(srcdir)/putenv.c $(OUTPUT_OPTION)
-./random.lo: $(srcdir)/random.c $(INCDIR)/ansidecl.h
- $(LTCOMPILE) -c -o $@ $(srcdir)/random.c
+./random.o: $(srcdir)/random.c $(INCDIR)/ansidecl.h
+ if [ x"$(PICFLAG)" != x ]; then \
+ $(COMPILE.c) $(PICFLAG) $(srcdir)/random.c -o pic/$@; \
+ else true; fi
+ $(COMPILE.c) $(srcdir)/random.c $(OUTPUT_OPTION)
-./regex.lo: $(srcdir)/regex.c config.h $(INCDIR)/ansidecl.h $(INCDIR)/xregex.h \
+./regex.o: $(srcdir)/regex.c config.h $(INCDIR)/ansidecl.h $(INCDIR)/xregex.h \
$(INCDIR)/xregex2.h
- $(LTCOMPILE) -c -o $@ $(srcdir)/regex.c
+ if [ x"$(PICFLAG)" != x ]; then \
+ $(COMPILE.c) $(PICFLAG) $(srcdir)/regex.c -o pic/$@; \
+ else true; fi
+ $(COMPILE.c) $(srcdir)/regex.c $(OUTPUT_OPTION)
-./rename.lo: $(srcdir)/rename.c config.h $(INCDIR)/ansidecl.h
- $(LTCOMPILE) -c -o $@ $(srcdir)/rename.c
+./rename.o: $(srcdir)/rename.c config.h $(INCDIR)/ansidecl.h
+ if [ x"$(PICFLAG)" != x ]; then \
+ $(COMPILE.c) $(PICFLAG) $(srcdir)/rename.c -o pic/$@; \
+ else true; fi
+ $(COMPILE.c) $(srcdir)/rename.c $(OUTPUT_OPTION)
-./rindex.lo: $(srcdir)/rindex.c
- $(LTCOMPILE) -c -o $@ $(srcdir)/rindex.c
+./rindex.o: $(srcdir)/rindex.c
+ if [ x"$(PICFLAG)" != x ]; then \
+ $(COMPILE.c) $(PICFLAG) $(srcdir)/rindex.c -o pic/$@; \
+ else true; fi
+ $(COMPILE.c) $(srcdir)/rindex.c $(OUTPUT_OPTION)
-./safe-ctype.lo: $(srcdir)/safe-ctype.c $(INCDIR)/ansidecl.h \
+./safe-ctype.o: $(srcdir)/safe-ctype.c $(INCDIR)/ansidecl.h \
$(INCDIR)/safe-ctype.h
- $(LTCOMPILE) -c -o $@ $(srcdir)/safe-ctype.c
+ if [ x"$(PICFLAG)" != x ]; then \
+ $(COMPILE.c) $(PICFLAG) $(srcdir)/safe-ctype.c -o pic/$@; \
+ else true; fi
+ $(COMPILE.c) $(srcdir)/safe-ctype.c $(OUTPUT_OPTION)
-./setenv.lo: $(srcdir)/setenv.c config.h $(INCDIR)/ansidecl.h
- $(LTCOMPILE) -c -o $@ $(srcdir)/setenv.c
+./setenv.o: $(srcdir)/setenv.c config.h $(INCDIR)/ansidecl.h
+ if [ x"$(PICFLAG)" != x ]; then \
+ $(COMPILE.c) $(PICFLAG) $(srcdir)/setenv.c -o pic/$@; \
+ else true; fi
+ $(COMPILE.c) $(srcdir)/setenv.c $(OUTPUT_OPTION)
-./sigsetmask.lo: $(srcdir)/sigsetmask.c $(INCDIR)/ansidecl.h
- $(LTCOMPILE) -c -o $@ $(srcdir)/sigsetmask.c
+./sigsetmask.o: $(srcdir)/sigsetmask.c $(INCDIR)/ansidecl.h
+ if [ x"$(PICFLAG)" != x ]; then \
+ $(COMPILE.c) $(PICFLAG) $(srcdir)/sigsetmask.c -o pic/$@; \
+ else true; fi
+ $(COMPILE.c) $(srcdir)/sigsetmask.c $(OUTPUT_OPTION)
-./snprintf.lo: $(srcdir)/snprintf.c $(INCDIR)/ansidecl.h
- $(LTCOMPILE) -c -o $@ $(srcdir)/snprintf.c
+./snprintf.o: $(srcdir)/snprintf.c $(INCDIR)/ansidecl.h
+ if [ x"$(PICFLAG)" != x ]; then \
+ $(COMPILE.c) $(PICFLAG) $(srcdir)/snprintf.c -o pic/$@; \
+ else true; fi
+ $(COMPILE.c) $(srcdir)/snprintf.c $(OUTPUT_OPTION)
-./sort.lo: $(srcdir)/sort.c config.h $(INCDIR)/ansidecl.h $(INCDIR)/libiberty.h \
+./sort.o: $(srcdir)/sort.c config.h $(INCDIR)/ansidecl.h $(INCDIR)/libiberty.h \
$(INCDIR)/sort.h
- $(LTCOMPILE) -c -o $@ $(srcdir)/sort.c
+ if [ x"$(PICFLAG)" != x ]; then \
+ $(COMPILE.c) $(PICFLAG) $(srcdir)/sort.c -o pic/$@; \
+ else true; fi
+ $(COMPILE.c) $(srcdir)/sort.c $(OUTPUT_OPTION)
-./spaces.lo: $(srcdir)/spaces.c $(INCDIR)/ansidecl.h $(INCDIR)/libiberty.h
- $(LTCOMPILE) -c -o $@ $(srcdir)/spaces.c
+./spaces.o: $(srcdir)/spaces.c $(INCDIR)/ansidecl.h $(INCDIR)/libiberty.h
+ if [ x"$(PICFLAG)" != x ]; then \
+ $(COMPILE.c) $(PICFLAG) $(srcdir)/spaces.c -o pic/$@; \
+ else true; fi
+ $(COMPILE.c) $(srcdir)/spaces.c $(OUTPUT_OPTION)
-./splay-tree.lo: $(srcdir)/splay-tree.c config.h $(INCDIR)/ansidecl.h \
+./splay-tree.o: $(srcdir)/splay-tree.c config.h $(INCDIR)/ansidecl.h \
$(INCDIR)/libiberty.h $(INCDIR)/splay-tree.h
- $(LTCOMPILE) -c -o $@ $(srcdir)/splay-tree.c
+ if [ x"$(PICFLAG)" != x ]; then \
+ $(COMPILE.c) $(PICFLAG) $(srcdir)/splay-tree.c -o pic/$@; \
+ else true; fi
+ $(COMPILE.c) $(srcdir)/splay-tree.c $(OUTPUT_OPTION)
-./stpcpy.lo: $(srcdir)/stpcpy.c $(INCDIR)/ansidecl.h
- $(LTCOMPILE) -c -o $@ $(srcdir)/stpcpy.c
+./stpcpy.o: $(srcdir)/stpcpy.c $(INCDIR)/ansidecl.h
+ if [ x"$(PICFLAG)" != x ]; then \
+ $(COMPILE.c) $(PICFLAG) $(srcdir)/stpcpy.c -o pic/$@; \
+ else true; fi
+ $(COMPILE.c) $(srcdir)/stpcpy.c $(OUTPUT_OPTION)
-./stpncpy.lo: $(srcdir)/stpncpy.c $(INCDIR)/ansidecl.h
- $(LTCOMPILE) -c -o $@ $(srcdir)/stpncpy.c
+./stpncpy.o: $(srcdir)/stpncpy.c $(INCDIR)/ansidecl.h
+ if [ x"$(PICFLAG)" != x ]; then \
+ $(COMPILE.c) $(PICFLAG) $(srcdir)/stpncpy.c -o pic/$@; \
+ else true; fi
+ $(COMPILE.c) $(srcdir)/stpncpy.c $(OUTPUT_OPTION)
-./strcasecmp.lo: $(srcdir)/strcasecmp.c $(INCDIR)/ansidecl.h
- $(LTCOMPILE) -c -o $@ $(srcdir)/strcasecmp.c
+./strcasecmp.o: $(srcdir)/strcasecmp.c $(INCDIR)/ansidecl.h
+ if [ x"$(PICFLAG)" != x ]; then \
+ $(COMPILE.c) $(PICFLAG) $(srcdir)/strcasecmp.c -o pic/$@; \
+ else true; fi
+ $(COMPILE.c) $(srcdir)/strcasecmp.c $(OUTPUT_OPTION)
-./strchr.lo: $(srcdir)/strchr.c $(INCDIR)/ansidecl.h
- $(LTCOMPILE) -c -o $@ $(srcdir)/strchr.c
+./strchr.o: $(srcdir)/strchr.c $(INCDIR)/ansidecl.h
+ if [ x"$(PICFLAG)" != x ]; then \
+ $(COMPILE.c) $(PICFLAG) $(srcdir)/strchr.c -o pic/$@; \
+ else true; fi
+ $(COMPILE.c) $(srcdir)/strchr.c $(OUTPUT_OPTION)
-./strdup.lo: $(srcdir)/strdup.c $(INCDIR)/ansidecl.h
- $(LTCOMPILE) -c -o $@ $(srcdir)/strdup.c
+./strdup.o: $(srcdir)/strdup.c $(INCDIR)/ansidecl.h
+ if [ x"$(PICFLAG)" != x ]; then \
+ $(COMPILE.c) $(PICFLAG) $(srcdir)/strdup.c -o pic/$@; \
+ else true; fi
+ $(COMPILE.c) $(srcdir)/strdup.c $(OUTPUT_OPTION)
-./strerror.lo: $(srcdir)/strerror.c config.h $(INCDIR)/ansidecl.h \
+./strerror.o: $(srcdir)/strerror.c config.h $(INCDIR)/ansidecl.h \
$(INCDIR)/libiberty.h
- $(LTCOMPILE) -c -o $@ $(srcdir)/strerror.c
+ if [ x"$(PICFLAG)" != x ]; then \
+ $(COMPILE.c) $(PICFLAG) $(srcdir)/strerror.c -o pic/$@; \
+ else true; fi
+ $(COMPILE.c) $(srcdir)/strerror.c $(OUTPUT_OPTION)
-./strncasecmp.lo: $(srcdir)/strncasecmp.c $(INCDIR)/ansidecl.h
- $(LTCOMPILE) -c -o $@ $(srcdir)/strncasecmp.c
+./strncasecmp.o: $(srcdir)/strncasecmp.c $(INCDIR)/ansidecl.h
+ if [ x"$(PICFLAG)" != x ]; then \
+ $(COMPILE.c) $(PICFLAG) $(srcdir)/strncasecmp.c -o pic/$@; \
+ else true; fi
+ $(COMPILE.c) $(srcdir)/strncasecmp.c $(OUTPUT_OPTION)
-./strncmp.lo: $(srcdir)/strncmp.c $(INCDIR)/ansidecl.h
- $(LTCOMPILE) -c -o $@ $(srcdir)/strncmp.c
+./strncmp.o: $(srcdir)/strncmp.c $(INCDIR)/ansidecl.h
+ if [ x"$(PICFLAG)" != x ]; then \
+ $(COMPILE.c) $(PICFLAG) $(srcdir)/strncmp.c -o pic/$@; \
+ else true; fi
+ $(COMPILE.c) $(srcdir)/strncmp.c $(OUTPUT_OPTION)
-./strrchr.lo: $(srcdir)/strrchr.c $(INCDIR)/ansidecl.h
- $(LTCOMPILE) -c -o $@ $(srcdir)/strrchr.c
+./strrchr.o: $(srcdir)/strrchr.c $(INCDIR)/ansidecl.h
+ if [ x"$(PICFLAG)" != x ]; then \
+ $(COMPILE.c) $(PICFLAG) $(srcdir)/strrchr.c -o pic/$@; \
+ else true; fi
+ $(COMPILE.c) $(srcdir)/strrchr.c $(OUTPUT_OPTION)
-./strsignal.lo: $(srcdir)/strsignal.c config.h $(INCDIR)/ansidecl.h \
+./strsignal.o: $(srcdir)/strsignal.c config.h $(INCDIR)/ansidecl.h \
$(INCDIR)/libiberty.h
- $(LTCOMPILE) -c -o $@ $(srcdir)/strsignal.c
+ if [ x"$(PICFLAG)" != x ]; then \
+ $(COMPILE.c) $(PICFLAG) $(srcdir)/strsignal.c -o pic/$@; \
+ else true; fi
+ $(COMPILE.c) $(srcdir)/strsignal.c $(OUTPUT_OPTION)
-./strstr.lo: $(srcdir)/strstr.c
- $(LTCOMPILE) -c -o $@ $(srcdir)/strstr.c
+./strstr.o: $(srcdir)/strstr.c
+ if [ x"$(PICFLAG)" != x ]; then \
+ $(COMPILE.c) $(PICFLAG) $(srcdir)/strstr.c -o pic/$@; \
+ else true; fi
+ $(COMPILE.c) $(srcdir)/strstr.c $(OUTPUT_OPTION)
-./strtod.lo: $(srcdir)/strtod.c $(INCDIR)/ansidecl.h $(INCDIR)/safe-ctype.h
- $(LTCOMPILE) -c -o $@ $(srcdir)/strtod.c
+./strtod.o: $(srcdir)/strtod.c $(INCDIR)/ansidecl.h $(INCDIR)/safe-ctype.h
+ if [ x"$(PICFLAG)" != x ]; then \
+ $(COMPILE.c) $(PICFLAG) $(srcdir)/strtod.c -o pic/$@; \
+ else true; fi
+ $(COMPILE.c) $(srcdir)/strtod.c $(OUTPUT_OPTION)
-./strtol.lo: $(srcdir)/strtol.c config.h $(INCDIR)/safe-ctype.h
- $(LTCOMPILE) -c -o $@ $(srcdir)/strtol.c
+./strtol.o: $(srcdir)/strtol.c config.h $(INCDIR)/safe-ctype.h
+ if [ x"$(PICFLAG)" != x ]; then \
+ $(COMPILE.c) $(PICFLAG) $(srcdir)/strtol.c -o pic/$@; \
+ else true; fi
+ $(COMPILE.c) $(srcdir)/strtol.c $(OUTPUT_OPTION)
-./strtoul.lo: $(srcdir)/strtoul.c config.h $(INCDIR)/ansidecl.h \
+./strtoul.o: $(srcdir)/strtoul.c config.h $(INCDIR)/ansidecl.h \
$(INCDIR)/safe-ctype.h
- $(LTCOMPILE) -c -o $@ $(srcdir)/strtoul.c
+ if [ x"$(PICFLAG)" != x ]; then \
+ $(COMPILE.c) $(PICFLAG) $(srcdir)/strtoul.c -o pic/$@; \
+ else true; fi
+ $(COMPILE.c) $(srcdir)/strtoul.c $(OUTPUT_OPTION)
-./ternary.lo: $(srcdir)/ternary.c config.h $(INCDIR)/ansidecl.h \
+./ternary.o: $(srcdir)/ternary.c config.h $(INCDIR)/ansidecl.h \
$(INCDIR)/libiberty.h $(INCDIR)/ternary.h
- $(LTCOMPILE) -c -o $@ $(srcdir)/ternary.c
+ if [ x"$(PICFLAG)" != x ]; then \
+ $(COMPILE.c) $(PICFLAG) $(srcdir)/ternary.c -o pic/$@; \
+ else true; fi
+ $(COMPILE.c) $(srcdir)/ternary.c $(OUTPUT_OPTION)
-./tmpnam.lo: $(srcdir)/tmpnam.c
- $(LTCOMPILE) -c -o $@ $(srcdir)/tmpnam.c
+./tmpnam.o: $(srcdir)/tmpnam.c
+ if [ x"$(PICFLAG)" != x ]; then \
+ $(COMPILE.c) $(PICFLAG) $(srcdir)/tmpnam.c -o pic/$@; \
+ else true; fi
+ $(COMPILE.c) $(srcdir)/tmpnam.c $(OUTPUT_OPTION)
-./vasprintf.lo: $(srcdir)/vasprintf.c config.h $(INCDIR)/ansidecl.h \
+./vasprintf.o: $(srcdir)/vasprintf.c config.h $(INCDIR)/ansidecl.h \
$(INCDIR)/libiberty.h
- $(LTCOMPILE) -c -o $@ $(srcdir)/vasprintf.c
+ if [ x"$(PICFLAG)" != x ]; then \
+ $(COMPILE.c) $(PICFLAG) $(srcdir)/vasprintf.c -o pic/$@; \
+ else true; fi
+ $(COMPILE.c) $(srcdir)/vasprintf.c $(OUTPUT_OPTION)
-./vfork.lo: $(srcdir)/vfork.c $(INCDIR)/ansidecl.h
- $(LTCOMPILE) -c -o $@ $(srcdir)/vfork.c
+./vfork.o: $(srcdir)/vfork.c $(INCDIR)/ansidecl.h
+ if [ x"$(PICFLAG)" != x ]; then \
+ $(COMPILE.c) $(PICFLAG) $(srcdir)/vfork.c -o pic/$@; \
+ else true; fi
+ $(COMPILE.c) $(srcdir)/vfork.c $(OUTPUT_OPTION)
-./vfprintf.lo: $(srcdir)/vfprintf.c $(INCDIR)/ansidecl.h
- $(LTCOMPILE) -c -o $@ $(srcdir)/vfprintf.c
+./vfprintf.o: $(srcdir)/vfprintf.c $(INCDIR)/ansidecl.h
+ if [ x"$(PICFLAG)" != x ]; then \
+ $(COMPILE.c) $(PICFLAG) $(srcdir)/vfprintf.c -o pic/$@; \
+ else true; fi
+ $(COMPILE.c) $(srcdir)/vfprintf.c $(OUTPUT_OPTION)
-./vprintf.lo: $(srcdir)/vprintf.c $(INCDIR)/ansidecl.h
- $(LTCOMPILE) -c -o $@ $(srcdir)/vprintf.c
+./vprintf.o: $(srcdir)/vprintf.c $(INCDIR)/ansidecl.h
+ if [ x"$(PICFLAG)" != x ]; then \
+ $(COMPILE.c) $(PICFLAG) $(srcdir)/vprintf.c -o pic/$@; \
+ else true; fi
+ $(COMPILE.c) $(srcdir)/vprintf.c $(OUTPUT_OPTION)
-./vsnprintf.lo: $(srcdir)/vsnprintf.c config.h $(INCDIR)/ansidecl.h \
+./vsnprintf.o: $(srcdir)/vsnprintf.c config.h $(INCDIR)/ansidecl.h \
$(INCDIR)/libiberty.h
- $(LTCOMPILE) -c -o $@ $(srcdir)/vsnprintf.c
+ if [ x"$(PICFLAG)" != x ]; then \
+ $(COMPILE.c) $(PICFLAG) $(srcdir)/vsnprintf.c -o pic/$@; \
+ else true; fi
+ $(COMPILE.c) $(srcdir)/vsnprintf.c $(OUTPUT_OPTION)
-./vsprintf.lo: $(srcdir)/vsprintf.c $(INCDIR)/ansidecl.h
- $(LTCOMPILE) -c -o $@ $(srcdir)/vsprintf.c
+./vsprintf.o: $(srcdir)/vsprintf.c $(INCDIR)/ansidecl.h
+ if [ x"$(PICFLAG)" != x ]; then \
+ $(COMPILE.c) $(PICFLAG) $(srcdir)/vsprintf.c -o pic/$@; \
+ else true; fi
+ $(COMPILE.c) $(srcdir)/vsprintf.c $(OUTPUT_OPTION)
-./waitpid.lo: $(srcdir)/waitpid.c config.h
- $(LTCOMPILE) -c -o $@ $(srcdir)/waitpid.c
+./waitpid.o: $(srcdir)/waitpid.c config.h
+ if [ x"$(PICFLAG)" != x ]; then \
+ $(COMPILE.c) $(PICFLAG) $(srcdir)/waitpid.c -o pic/$@; \
+ else true; fi
+ $(COMPILE.c) $(srcdir)/waitpid.c $(OUTPUT_OPTION)
-./xatexit.lo: $(srcdir)/xatexit.c $(INCDIR)/ansidecl.h $(INCDIR)/libiberty.h
- $(LTCOMPILE) -c -o $@ $(srcdir)/xatexit.c
+./xatexit.o: $(srcdir)/xatexit.c $(INCDIR)/ansidecl.h $(INCDIR)/libiberty.h
+ if [ x"$(PICFLAG)" != x ]; then \
+ $(COMPILE.c) $(PICFLAG) $(srcdir)/xatexit.c -o pic/$@; \
+ else true; fi
+ $(COMPILE.c) $(srcdir)/xatexit.c $(OUTPUT_OPTION)
-./xexit.lo: $(srcdir)/xexit.c config.h $(INCDIR)/ansidecl.h $(INCDIR)/libiberty.h
- $(LTCOMPILE) -c -o $@ $(srcdir)/xexit.c
+./xexit.o: $(srcdir)/xexit.c config.h $(INCDIR)/ansidecl.h $(INCDIR)/libiberty.h
+ if [ x"$(PICFLAG)" != x ]; then \
+ $(COMPILE.c) $(PICFLAG) $(srcdir)/xexit.c -o pic/$@; \
+ else true; fi
+ $(COMPILE.c) $(srcdir)/xexit.c $(OUTPUT_OPTION)
-./xmalloc.lo: $(srcdir)/xmalloc.c config.h $(INCDIR)/ansidecl.h \
+./xmalloc.o: $(srcdir)/xmalloc.c config.h $(INCDIR)/ansidecl.h \
$(INCDIR)/libiberty.h
- $(LTCOMPILE) -c -o $@ $(srcdir)/xmalloc.c
+ if [ x"$(PICFLAG)" != x ]; then \
+ $(COMPILE.c) $(PICFLAG) $(srcdir)/xmalloc.c -o pic/$@; \
+ else true; fi
+ $(COMPILE.c) $(srcdir)/xmalloc.c $(OUTPUT_OPTION)
-./xmemdup.lo: $(srcdir)/xmemdup.c config.h $(INCDIR)/ansidecl.h \
+./xmemdup.o: $(srcdir)/xmemdup.c config.h $(INCDIR)/ansidecl.h \
$(INCDIR)/libiberty.h
- $(LTCOMPILE) -c -o $@ $(srcdir)/xmemdup.c
+ if [ x"$(PICFLAG)" != x ]; then \
+ $(COMPILE.c) $(PICFLAG) $(srcdir)/xmemdup.c -o pic/$@; \
+ else true; fi
+ $(COMPILE.c) $(srcdir)/xmemdup.c $(OUTPUT_OPTION)
-./xstrdup.lo: $(srcdir)/xstrdup.c config.h $(INCDIR)/ansidecl.h \
+./xstrdup.o: $(srcdir)/xstrdup.c config.h $(INCDIR)/ansidecl.h \
$(INCDIR)/libiberty.h
- $(LTCOMPILE) -c -o $@ $(srcdir)/xstrdup.c
+ if [ x"$(PICFLAG)" != x ]; then \
+ $(COMPILE.c) $(PICFLAG) $(srcdir)/xstrdup.c -o pic/$@; \
+ else true; fi
+ $(COMPILE.c) $(srcdir)/xstrdup.c $(OUTPUT_OPTION)
-./xstrerror.lo: $(srcdir)/xstrerror.c config.h $(INCDIR)/ansidecl.h \
+./xstrerror.o: $(srcdir)/xstrerror.c config.h $(INCDIR)/ansidecl.h \
$(INCDIR)/libiberty.h
- $(LTCOMPILE) -c -o $@ $(srcdir)/xstrerror.c
+ if [ x"$(PICFLAG)" != x ]; then \
+ $(COMPILE.c) $(PICFLAG) $(srcdir)/xstrerror.c -o pic/$@; \
+ else true; fi
+ $(COMPILE.c) $(srcdir)/xstrerror.c $(OUTPUT_OPTION)
+# Don't export variables to the environment, in order to not confuse
+# configure.
+.NOEXPORT:
# include <unistd.h>
#endif"
-ac_subst_vars='SHELL PATH_SEPARATOR PACKAGE_NAME PACKAGE_TARNAME PACKAGE_VERSION PACKAGE_STRING PACKAGE_BUGREPORT exec_prefix prefix program_transform_name bindir sbindir libexecdir datadir sysconfdir sharedstatedir localstatedir libdir includedir oldincludedir infodir mandir build_alias host_alias target_alias DEFS ECHO_C ECHO_N ECHO_T LIBS libiberty_topdir MAINT NOTMAINT MAKEINFO BUILD_INFO PERL HAVE_PERL build build_cpu build_vendor build_os host host_cpu host_vendor host_os AR ac_ct_AR RANLIB ac_ct_RANLIB CC CFLAGS LDFLAGS CPPFLAGS ac_ct_CC EXEEXT OBJEXT CPP ac_libiberty_warn_cflags LN_S STRIP ac_ct_STRIP LIBTOOL INSTALL_PROGRAM INSTALL_SCRIPT INSTALL_DATA EGREP LIBOBJS CHECK target_header_dir pexecute ltpexecute INSTALL_DEST enable_shared LTLIBOBJS'
+ac_subst_vars='SHELL PATH_SEPARATOR PACKAGE_NAME PACKAGE_TARNAME PACKAGE_VERSION PACKAGE_STRING PACKAGE_BUGREPORT exec_prefix prefix program_transform_name bindir sbindir libexecdir datadir sysconfdir sharedstatedir localstatedir libdir includedir oldincludedir infodir mandir build_alias host_alias target_alias DEFS ECHO_C ECHO_N ECHO_T LIBS libiberty_topdir MAINT NOTMAINT MAKEINFO BUILD_INFO PERL HAVE_PERL build build_cpu build_vendor build_os host host_cpu host_vendor host_os AR ac_ct_AR RANLIB ac_ct_RANLIB CC CFLAGS LDFLAGS CPPFLAGS ac_ct_CC EXEEXT OBJEXT CPP ac_libiberty_warn_cflags NO_MINUS_C_MINUS_O OUTPUT_OPTION INSTALL_PROGRAM INSTALL_SCRIPT INSTALL_DATA EGREP LIBOBJS CHECK target_header_dir pexecute INSTALL_DEST LTLIBOBJS'
ac_subst_files='host_makefile_frag'
# Initialize some variables set by options.
--enable-maintainer-mode
enable make rules and dependencies not useful
(and sometimes confusing) to the casual installer
- --enable-shared=PKGS build shared libraries default=no
- --enable-static=PKGS build static libraries default=yes
- --enable-fast-install=PKGS optimize for fast installation default=yes
- --disable-libtool-lock avoid locking (might break parallel builds)
--enable-install-libiberty Install headers for end users
Optional Packages:
--with-build-subdir=SUBDIR Configuring in a subdirectory for build
--with-cross-host=HOST Configuring with a cross compiler
--with-newlib Configuring with newlib
- --with-gnu-ld assume the C compiler uses GNU ld default=no
- --with-pic try to use only PIC/non-PIC objects default=use both
Some influential environment variables:
CC C compiler command
else
echo "$as_me: WARNING: no configuration information is in $ac_dir" >&2
fi
- cd $ac_popdir
+ cd "$ac_popdir"
done
fi
-
-# FIXME: libiberty doesn't support --disable-static
-enable_static=yes
# This works around the fact that libtool configuration may change LD
# for this particular configuration, but some shells, instead of
cat conftest.err >&5
echo "$as_me:$LINENO: \$? = $ac_status" >&5
(exit $ac_status); } &&
- { ac_try='test -z "$ac_c_werror_flag"
- || test ! -s conftest.err'
+ { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err'
{ (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
(eval $ac_try) 2>&5
ac_status=$?
cat conftest.err >&5
echo "$as_me:$LINENO: \$? = $ac_status" >&5
(exit $ac_status); } &&
- { ac_try='test -z "$ac_c_werror_flag"
- || test ! -s conftest.err'
+ { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err'
{ (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
(eval $ac_try) 2>&5
ac_status=$?
cat conftest.err >&5
echo "$as_me:$LINENO: \$? = $ac_status" >&5
(exit $ac_status); } &&
- { ac_try='test -z "$ac_c_werror_flag"
- || test ! -s conftest.err'
+ { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err'
{ (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
(eval $ac_try) 2>&5
ac_status=$?
cat conftest.err >&5
echo "$as_me:$LINENO: \$? = $ac_status" >&5
(exit $ac_status); } &&
- { ac_try='test -z "$ac_c_werror_flag"
- || test ! -s conftest.err'
+ { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err'
{ (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
(eval $ac_try) 2>&5
ac_status=$?
cat conftest.err >&5
echo "$as_me:$LINENO: \$? = $ac_status" >&5
(exit $ac_status); } &&
- { ac_try='test -z "$ac_c_werror_flag"
- || test ! -s conftest.err'
+ { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err'
{ (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
(eval $ac_try) 2>&5
ac_status=$?
cat conftest.err >&5
echo "$as_me:$LINENO: \$? = $ac_status" >&5
(exit $ac_status); } &&
- { ac_try='test -z "$ac_c_werror_flag"
- || test ! -s conftest.err'
+ { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err'
{ (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
(eval $ac_try) 2>&5
ac_status=$?
fi
+if test "x$CC" != xcc; then
+ echo "$as_me:$LINENO: checking whether $CC and cc understand -c and -o together" >&5
+echo $ECHO_N "checking whether $CC and cc understand -c and -o together... $ECHO_C" >&6
+else
+ echo "$as_me:$LINENO: checking whether cc understands -c and -o together" >&5
+echo $ECHO_N "checking whether cc understands -c and -o together... $ECHO_C" >&6
+fi
+set dummy $CC; ac_cc=`echo $2 |
+ sed 's/[^a-zA-Z0-9_]/_/g;s/^[0-9]/_/'`
+if eval "test \"\${ac_cv_prog_cc_${ac_cc}_c_o+set}\" = set"; then
+ echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+ cat >conftest.$ac_ext <<_ACEOF
+/* confdefs.h. */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h. */
+
+int
+main ()
+{
+
+ ;
+ return 0;
+}
+_ACEOF
+# Make sure it works both with $CC and with simple cc.
+# We do the test twice because some compilers refuse to overwrite an
+# existing .o file with -o, though they will create one.
+ac_try='$CC -c conftest.$ac_ext -o conftest.$ac_objext >&5'
+if { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); } &&
+ test -f conftest.$ac_objext && { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); };
+then
+ eval ac_cv_prog_cc_${ac_cc}_c_o=yes
+ if test "x$CC" != xcc; then
+ # Test first that cc exists at all.
+ if { ac_try='cc -c conftest.$ac_ext >&5'
+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }; }; then
+ ac_try='cc -c conftest.$ac_ext -o conftest.$ac_objext >&5'
+ if { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); } &&
+ test -f conftest.$ac_objext && { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); };
+ then
+ # cc works too.
+ :
+ else
+ # cc exists but doesn't like -o.
+ eval ac_cv_prog_cc_${ac_cc}_c_o=no
+ fi
+ fi
+ fi
+else
+ eval ac_cv_prog_cc_${ac_cc}_c_o=no
+fi
+rm -f conftest*
+
+fi
+if eval "test \"`echo '$ac_cv_prog_cc_'${ac_cc}_c_o`\" = yes"; then
+ echo "$as_me:$LINENO: result: yes" >&5
+echo "${ECHO_T}yes" >&6
+else
+ echo "$as_me:$LINENO: result: no" >&5
+echo "${ECHO_T}no" >&6
+
+cat >>confdefs.h <<\_ACEOF
+#define NO_MINUS_C_MINUS_O 1
+_ACEOF
+
+fi
+
+# autoconf is lame and doesn't give us any substitution variable for this.
+if eval "test \"`echo '$ac_cv_prog_cc_'${ac_cc}_c_o`\" = no"; then
+ NO_MINUS_C_MINUS_O=yes
+else
+ OUTPUT_OPTION='-o $@'
+fi
+
+
+
echo "$as_me:$LINENO: checking for an ANSI C-conforming const" >&5
echo $ECHO_N "checking for an ANSI C-conforming const... $ECHO_C" >&6
cat conftest.err >&5
echo "$as_me:$LINENO: \$? = $ac_status" >&5
(exit $ac_status); } &&
- { ac_try='test -z "$ac_c_werror_flag"
- || test ! -s conftest.err'
+ { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err'
{ (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
(eval $ac_try) 2>&5
ac_status=$?
cat conftest.err >&5
echo "$as_me:$LINENO: \$? = $ac_status" >&5
(exit $ac_status); } &&
- { ac_try='test -z "$ac_c_werror_flag"
- || test ! -s conftest.err'
+ { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err'
{ (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
(eval $ac_try) 2>&5
ac_status=$?
ac_status=$?
grep -v '^ *+' conftest.er1 >conftest.err
rm -f conftest.er1
- cat conftest.err >&5
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); } &&
- { ac_try='test -z "$ac_c_werror_flag"
- || test ! -s conftest.err'
- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
- (eval $ac_try) 2>&5
- ac_status=$?
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); }; } &&
- { ac_try='test -s conftest.$ac_objext'
- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
- (eval $ac_try) 2>&5
- ac_status=$?
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); }; }; then
- # It does; now see whether it defined to BIG_ENDIAN or not.
-cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h. */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h. */
-#include <sys/types.h>
-#include <sys/param.h>
-int
-main ()
-{
-
-#if BYTE_ORDER != BIG_ENDIAN
- not big endian
-#endif
- ;
- return 0;
-}
-_ACEOF
-rm -f conftest.$ac_objext
-if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
- (eval $ac_compile) 2>conftest.er1
- ac_status=$?
- grep -v '^ *+' conftest.er1 >conftest.err
- rm -f conftest.er1
- cat conftest.err >&5
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); } &&
- { ac_try='test -z "$ac_c_werror_flag"
- || test ! -s conftest.err'
- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
- (eval $ac_try) 2>&5
- ac_status=$?
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); }; } &&
- { ac_try='test -s conftest.$ac_objext'
- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
- (eval $ac_try) 2>&5
- ac_status=$?
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); }; }; then
- ac_cv_c_bigendian=yes
-else
- echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
-ac_cv_c_bigendian=no
-fi
-rm -f conftest.err conftest.$ac_objext conftest.$ac_ext
-else
- echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
-fi
-rm -f conftest.err conftest.$ac_objext conftest.$ac_ext
-if test $ac_cv_c_bigendian = unknown; then
-if test "$cross_compiling" = yes; then
- echo $ac_n "cross-compiling... " 2>&6
-else
- cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h. */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h. */
-main () {
- /* Are we little or big endian? From Harbison&Steele. */
- union
- {
- long l;
- char c[sizeof (long)];
- } u;
- u.l = 1;
- exit (u.c[sizeof (long) - 1] == 1);
-}
-_ACEOF
-rm -f conftest$ac_exeext
-if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
- (eval $ac_link) 2>&5
- ac_status=$?
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); } && { ac_try='./conftest$ac_exeext'
- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
- (eval $ac_try) 2>&5
- ac_status=$?
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); }; }; then
- ac_cv_c_bigendian=no
-else
- echo "$as_me: program exited with status $ac_status" >&5
-echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
-( exit $ac_status )
-ac_cv_c_bigendian=yes
-fi
-rm -f core *.core gmon.out bb.out conftest$ac_exeext conftest.$ac_objext conftest.$ac_ext
-fi
-fi
-fi
-echo "$as_me:$LINENO: result: $ac_cv_c_bigendian" >&5
-echo "${ECHO_T}$ac_cv_c_bigendian" >&6
-if test $ac_cv_c_bigendian = unknown; then
-echo "$as_me:$LINENO: checking to probe for byte ordering" >&5
-echo $ECHO_N "checking to probe for byte ordering... $ECHO_C" >&6
-
-cat >conftest.c <<EOF
-short ascii_mm[] = { 0x4249, 0x4765, 0x6E44, 0x6961, 0x6E53, 0x7953, 0 };
-short ascii_ii[] = { 0x694C, 0x5454, 0x656C, 0x6E45, 0x6944, 0x6E61, 0 };
-void _ascii() { char* s = (char*) ascii_mm; s = (char*) ascii_ii; }
-short ebcdic_ii[] = { 0x89D3, 0xE3E3, 0x8593, 0x95C5, 0x89C4, 0x9581, 0 };
-short ebcdic_mm[] = { 0xC2C9, 0xC785, 0x95C4, 0x8981, 0x95E2, 0xA8E2, 0 };
-void _ebcdic() { char* s = (char*) ebcdic_mm; s = (char*) ebcdic_ii; }
-int main() { _ascii (); _ebcdic (); return 0; }
-EOF
- if test -f conftest.c ; then
- if ${CC-cc} ${CFLAGS} -c conftest.c -o conftest.o && test -f conftest.o ; then
- if test `grep -l BIGenDianSyS conftest.o` ; then
- echo $ac_n ' big endian probe OK, ' 1>&6
- ac_cv_c_bigendian=yes
- fi
- if test `grep -l LiTTleEnDian conftest.o` ; then
- echo $ac_n ' little endian probe OK, ' 1>&6
- if test $ac_cv_c_bigendian = yes ; then
- ac_cv_c_bigendian=unknown;
- else
- ac_cv_c_bigendian=no
- fi
- fi
- echo $ac_n 'guessing bigendian ... ' >&6
- fi
- fi
-echo "$as_me:$LINENO: result: $ac_cv_c_bigendian" >&5
-echo "${ECHO_T}$ac_cv_c_bigendian" >&6
-fi
-if test $ac_cv_c_bigendian = yes; then
-
-cat >>confdefs.h <<\_ACEOF
-#define WORDS_BIGENDIAN 1
-_ACEOF
-
-
-cat >>confdefs.h <<\_ACEOF
-#define HOST_WORDS_BIG_ENDIAN 1
-_ACEOF
-
- BYTEORDER=4321
-else
- BYTEORDER=1234
-fi
-
-cat >>confdefs.h <<_ACEOF
-#define BYTEORDER $BYTEORDER
-_ACEOF
-
-if test $ac_cv_c_bigendian = unknown; then
- { { echo "$as_me:$LINENO: error: unknown endianess - sorry, please pre-set ac_cv_c_bigendian" >&5
-echo "$as_me: error: unknown endianess - sorry, please pre-set ac_cv_c_bigendian" >&2;}
- { (exit 1); exit 1; }; }
-fi
-
-
-# Check whether --enable-shared or --disable-shared was given.
-if test "${enable_shared+set}" = set; then
- enableval="$enable_shared"
- p=${PACKAGE-default}
-case $enableval in
-yes) enable_shared=yes ;;
-no) enable_shared=no ;;
-*)
- enable_shared=no
- # Look at the argument we got. We use all the common list separators.
- IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}:,"
- for pkg in $enableval; do
- if test "X$pkg" = "X$p"; then
- enable_shared=yes
- fi
- done
- IFS="$ac_save_ifs"
- ;;
-esac
-else
- enable_shared=no
-fi;
-
-# Check whether --enable-static or --disable-static was given.
-if test "${enable_static+set}" = set; then
- enableval="$enable_static"
- p=${PACKAGE-default}
-case $enableval in
-yes) enable_static=yes ;;
-no) enable_static=no ;;
-*)
- enable_static=no
- # Look at the argument we got. We use all the common list separators.
- IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}:,"
- for pkg in $enableval; do
- if test "X$pkg" = "X$p"; then
- enable_static=yes
- fi
- done
- IFS="$ac_save_ifs"
- ;;
-esac
-else
- enable_static=yes
-fi;
-# Check whether --enable-fast-install or --disable-fast-install was given.
-if test "${enable_fast_install+set}" = set; then
- enableval="$enable_fast_install"
- p=${PACKAGE-default}
-case $enableval in
-yes) enable_fast_install=yes ;;
-no) enable_fast_install=no ;;
-*)
- enable_fast_install=no
- # Look at the argument we got. We use all the common list separators.
- IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}:,"
- for pkg in $enableval; do
- if test "X$pkg" = "X$p"; then
- enable_fast_install=yes
- fi
- done
- IFS="$ac_save_ifs"
- ;;
-esac
-else
- enable_fast_install=yes
-fi;
-
-# Check whether --with-gnu-ld or --without-gnu-ld was given.
-if test "${with_gnu_ld+set}" = set; then
- withval="$with_gnu_ld"
- test "$withval" = no || with_gnu_ld=yes
-else
- with_gnu_ld=no
-fi;
-ac_prog=ld
-if test "$GCC" = yes; then
- # Check if gcc -print-prog-name=ld gives a path.
- echo "$as_me:$LINENO: checking for ld used by GCC" >&5
-echo $ECHO_N "checking for ld used by GCC... $ECHO_C" >&6
- case $host in
- *-*-mingw*)
- # gcc leaves a trailing carriage return which upsets mingw
- ac_prog=`($CC -print-prog-name=ld) 2>&5 | tr -d '\015'` ;;
- *)
- ac_prog=`($CC -print-prog-name=ld) 2>&5` ;;
- esac
- case $ac_prog in
- # Accept absolute paths.
- [\\/]* | [A-Za-z]:[\\/]*)
- re_direlt='/[^/][^/]*/\.\./'
- # Canonicalize the path of ld
- ac_prog=`echo $ac_prog| sed 's%\\\\%/%g'`
- while echo $ac_prog | grep "$re_direlt" > /dev/null 2>&1; do
- ac_prog=`echo $ac_prog| sed "s%$re_direlt%/%"`
- done
- test -z "$LD" && LD="$ac_prog"
- ;;
- "")
- # If it fails, then pretend we aren't using GCC.
- ac_prog=ld
- ;;
- *)
- # If it is relative, then search for the first ld in PATH.
- with_gnu_ld=unknown
- ;;
- esac
-elif test "$with_gnu_ld" = yes; then
- echo "$as_me:$LINENO: checking for GNU ld" >&5
-echo $ECHO_N "checking for GNU ld... $ECHO_C" >&6
-else
- echo "$as_me:$LINENO: checking for non-GNU ld" >&5
-echo $ECHO_N "checking for non-GNU ld... $ECHO_C" >&6
-fi
-if test "${lt_cv_path_LD+set}" = set; then
- echo $ECHO_N "(cached) $ECHO_C" >&6
-else
- if test -z "$LD"; then
- IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}${PATH_SEPARATOR-:}"
- for ac_dir in $PATH; do
- test -z "$ac_dir" && ac_dir=.
- if test -f "$ac_dir/$ac_prog" || test -f "$ac_dir/$ac_prog$ac_exeext"; then
- lt_cv_path_LD="$ac_dir/$ac_prog"
- # Check to see if the program is GNU ld. I'd rather use --version,
- # but apparently some GNU ld's only accept -v.
- # Break only if it was the GNU/non-GNU ld that we prefer.
- if "$lt_cv_path_LD" -v 2>&1 < /dev/null | egrep '(GNU|with BFD)' > /dev/null; then
- test "$with_gnu_ld" != no && break
- else
- test "$with_gnu_ld" != yes && break
- fi
- fi
- done
- IFS="$ac_save_ifs"
-else
- lt_cv_path_LD="$LD" # Let the user override the test with a path.
-fi
-fi
-
-LD="$lt_cv_path_LD"
-if test -n "$LD"; then
- echo "$as_me:$LINENO: result: $LD" >&5
-echo "${ECHO_T}$LD" >&6
-else
- echo "$as_me:$LINENO: result: no" >&5
-echo "${ECHO_T}no" >&6
-fi
-test -z "$LD" && { { echo "$as_me:$LINENO: error: no acceptable ld found in \$PATH" >&5
-echo "$as_me: error: no acceptable ld found in \$PATH" >&2;}
- { (exit 1); exit 1; }; }
-echo "$as_me:$LINENO: checking if the linker ($LD) is GNU ld" >&5
-echo $ECHO_N "checking if the linker ($LD) is GNU ld... $ECHO_C" >&6
-if test "${lt_cv_prog_gnu_ld+set}" = set; then
- echo $ECHO_N "(cached) $ECHO_C" >&6
-else
- # I'd rather use --version here, but apparently some GNU ld's only accept -v.
-if $LD -v 2>&1 </dev/null | egrep '(GNU|with BFD)' 1>&5; then
- lt_cv_prog_gnu_ld=yes
-else
- lt_cv_prog_gnu_ld=no
-fi
-fi
-echo "$as_me:$LINENO: result: $lt_cv_prog_gnu_ld" >&5
-echo "${ECHO_T}$lt_cv_prog_gnu_ld" >&6
-with_gnu_ld=$lt_cv_prog_gnu_ld
-
-
-echo "$as_me:$LINENO: checking for $LD option to reload object files" >&5
-echo $ECHO_N "checking for $LD option to reload object files... $ECHO_C" >&6
-if test "${lt_cv_ld_reload_flag+set}" = set; then
- echo $ECHO_N "(cached) $ECHO_C" >&6
-else
- lt_cv_ld_reload_flag='-r'
-fi
-echo "$as_me:$LINENO: result: $lt_cv_ld_reload_flag" >&5
-echo "${ECHO_T}$lt_cv_ld_reload_flag" >&6
-reload_flag=$lt_cv_ld_reload_flag
-test -n "$reload_flag" && reload_flag=" $reload_flag"
-
-echo "$as_me:$LINENO: checking for BSD-compatible nm" >&5
-echo $ECHO_N "checking for BSD-compatible nm... $ECHO_C" >&6
-if test "${lt_cv_path_NM+set}" = set; then
- echo $ECHO_N "(cached) $ECHO_C" >&6
-else
- if test -n "$NM"; then
- # Let the user override the test.
- lt_cv_path_NM="$NM"
-else
- IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}${PATH_SEPARATOR-:}"
- for ac_dir in $PATH /usr/ccs/bin /usr/ucb /bin; do
- test -z "$ac_dir" && ac_dir=.
- tmp_nm=$ac_dir/${ac_tool_prefix}nm
- if test -f $tmp_nm || test -f $tmp_nm$ac_exeext ; then
- # Check to see if the nm accepts a BSD-compat flag.
- # Adding the `sed 1q' prevents false positives on HP-UX, which says:
- # nm: unknown option "B" ignored
- # Tru64's nm complains that /dev/null is an invalid object file
- if ($tmp_nm -B /dev/null 2>&1 | sed '1q'; exit 0) | egrep '(/dev/null|Invalid file or object type)' >/dev/null; then
- lt_cv_path_NM="$tmp_nm -B"
- break
- elif ($tmp_nm -p /dev/null 2>&1 | sed '1q'; exit 0) | egrep /dev/null >/dev/null; then
- lt_cv_path_NM="$tmp_nm -p"
- break
- else
- lt_cv_path_NM=${lt_cv_path_NM="$tmp_nm"} # keep the first match, but
- continue # so that we can try to find one that supports BSD flags
- fi
- fi
- done
- IFS="$ac_save_ifs"
- test -z "$lt_cv_path_NM" && lt_cv_path_NM=nm
-fi
-fi
-
-NM="$lt_cv_path_NM"
-echo "$as_me:$LINENO: result: $NM" >&5
-echo "${ECHO_T}$NM" >&6
-
-echo "$as_me:$LINENO: checking whether ln -s works" >&5
-echo $ECHO_N "checking whether ln -s works... $ECHO_C" >&6
-LN_S=$as_ln_s
-if test "$LN_S" = "ln -s"; then
- echo "$as_me:$LINENO: result: yes" >&5
-echo "${ECHO_T}yes" >&6
-else
- echo "$as_me:$LINENO: result: no, using $LN_S" >&5
-echo "${ECHO_T}no, using $LN_S" >&6
-fi
-
-echo "$as_me:$LINENO: checking how to recognise dependant libraries" >&5
-echo $ECHO_N "checking how to recognise dependant libraries... $ECHO_C" >&6
-if test "${lt_cv_deplibs_check_method+set}" = set; then
- echo $ECHO_N "(cached) $ECHO_C" >&6
-else
- lt_cv_file_magic_cmd='$MAGIC_CMD'
-lt_cv_file_magic_test_file=
-lt_cv_deplibs_check_method='unknown'
-# Need to set the preceding variable on all platforms that support
-# interlibrary dependencies.
-# 'none' -- dependencies not supported.
-# `unknown' -- same as none, but documents that we really don't know.
-# 'pass_all' -- all dependencies passed with no checks.
-# 'test_compile' -- check by making test program.
-# 'file_magic [regex]' -- check by looking for files in library path
-# which responds to the $file_magic_cmd with a given egrep regex.
-# If you have `file' or equivalent on your system and you're not sure
-# whether `pass_all' will *always* work, you probably want this one.
-
-case $host_os in
-aix*)
- lt_cv_deplibs_check_method=pass_all
- ;;
-
-beos*)
- lt_cv_deplibs_check_method=pass_all
- ;;
-
-bsdi4*)
- lt_cv_deplibs_check_method='file_magic ELF [0-9][0-9]*-bit [ML]SB (shared object|dynamic lib)'
- lt_cv_file_magic_cmd='/usr/bin/file -L'
- lt_cv_file_magic_test_file=/shlib/libc.so
- ;;
-
-cygwin* | mingw* |pw32*)
- lt_cv_deplibs_check_method='file_magic file format pei*-i386(.*architecture: i386)?'
- lt_cv_file_magic_cmd='$OBJDUMP -f'
- ;;
-
-darwin* | rhapsody*)
- # this will be overwritten by pass_all, but leave it in just in case
- lt_cv_deplibs_check_method='file_magic Mach-O dynamically linked shared library'
- lt_cv_file_magic_cmd='/usr/bin/file -L'
- case "$host_os" in
- rhapsody* | darwin1.012)
- lt_cv_file_magic_test_file='/System/Library/Frameworks/System.framework/System'
- ;;
- *) # Darwin 1.3 on
- lt_cv_file_magic_test_file='/usr/lib/libSystem.dylib'
- ;;
- esac
- lt_cv_deplibs_check_method=pass_all
- ;;
-
-freebsd* | kfreebsd*-gnu)
- if echo __ELF__ | $CC -E - | grep __ELF__ > /dev/null; then
- case $host_cpu in
- i*86 )
- # Not sure whether the presence of OpenBSD here was a mistake.
- # Let's accept both of them until this is cleared up.
- lt_cv_deplibs_check_method='file_magic (FreeBSD|OpenBSD)/i[3-9]86 (compact )?demand paged shared library'
- lt_cv_file_magic_cmd=/usr/bin/file
- lt_cv_file_magic_test_file=`echo /usr/lib/libc.so.*`
- ;;
- esac
- else
- lt_cv_deplibs_check_method=pass_all
- fi
- ;;
-
-gnu*)
- lt_cv_deplibs_check_method=pass_all
- ;;
-
-hpux10.20*|hpux11*)
- case $host_cpu in
- hppa*)
- lt_cv_deplibs_check_method='file_magic (s[0-9][0-9][0-9]|PA-RISC[0-9].[0-9]) shared library'
- lt_cv_file_magic_cmd=/usr/bin/file
- lt_cv_file_magic_test_file=/usr/lib/libc.sl
- ;;
- ia64*)
- lt_cv_deplibs_check_method='file_magic (s[0-9][0-9][0-9]|ELF-[0-9][0-9]) shared object file - IA64'
- lt_cv_file_magic_cmd=/usr/bin/file
- lt_cv_file_magic_test_file=/usr/lib/hpux32/libc.so
- ;;
- esac
- ;;
-
-irix5* | irix6*)
- case $host_os in
- irix5*)
- # this will be overridden with pass_all, but let us keep it just in case
- lt_cv_deplibs_check_method="file_magic ELF 32-bit MSB dynamic lib MIPS - version 1"
- ;;
- *)
- case $LD in
- *-32|*"-32 ") libmagic=32-bit;;
- *-n32|*"-n32 ") libmagic=N32;;
- *-64|*"-64 ") libmagic=64-bit;;
- *) libmagic=never-match;;
- esac
- # this will be overridden with pass_all, but let us keep it just in case
- lt_cv_deplibs_check_method="file_magic ELF ${libmagic} MSB mips-[1234] dynamic lib MIPS - version 1"
- ;;
- esac
- lt_cv_file_magic_test_file=`echo /lib${libsuff}/libc.so*`
- lt_cv_deplibs_check_method=pass_all
- ;;
-
-# This must be Linux ELF.
-linux-gnu*)
- lt_cv_deplibs_check_method=pass_all
- ;;
-
-netbsd* | knetbsd*-gnu)
- if echo __ELF__ | $CC -E - | grep __ELF__ > /dev/null; then
- lt_cv_deplibs_check_method='match_pattern /lib[^/\.]+\.so\.[0-9]+\.[0-9]+$'
- else
- lt_cv_deplibs_check_method='match_pattern /lib[^/\.]+\.so$'
- fi
- ;;
-
-newsos6)
- lt_cv_deplibs_check_method='file_magic ELF [0-9][0-9]*-bit [ML]SB (executable|dynamic lib)'
- lt_cv_file_magic_cmd=/usr/bin/file
- lt_cv_file_magic_test_file=/usr/lib/libnls.so
- ;;
-
-osf3* | osf4* | osf5*)
- # this will be overridden with pass_all, but let us keep it just in case
- lt_cv_deplibs_check_method='file_magic COFF format alpha shared library'
- lt_cv_file_magic_test_file=/shlib/libc.so
- lt_cv_deplibs_check_method=pass_all
- ;;
-
-sco3.2v5*)
- lt_cv_deplibs_check_method=pass_all
- ;;
-
-solaris*)
- lt_cv_deplibs_check_method=pass_all
- lt_cv_file_magic_test_file=/lib/libc.so
- ;;
-
-sysv5uw[78]* | sysv4*uw2*)
- lt_cv_deplibs_check_method=pass_all
- ;;
-
-sysv4 | sysv4.2uw2* | sysv4.3* | sysv5*)
- case $host_vendor in
- ncr)
- lt_cv_deplibs_check_method=pass_all
- ;;
- motorola)
- lt_cv_deplibs_check_method='file_magic ELF [0-9][0-9]*-bit [ML]SB (shared object|dynamic lib) M[0-9][0-9]* Version [0-9]'
- lt_cv_file_magic_test_file=`echo /usr/lib/libc.so*`
- ;;
- esac
- ;;
-esac
-
-fi
-echo "$as_me:$LINENO: result: $lt_cv_deplibs_check_method" >&5
-echo "${ECHO_T}$lt_cv_deplibs_check_method" >&6
-file_magic_cmd=$lt_cv_file_magic_cmd
-deplibs_check_method=$lt_cv_deplibs_check_method
-
-
-
-
-# Autoconf 2.13's AC_OBJEXT and AC_EXEEXT macros only works for C compilers!
-
-# Only perform the check for file, if the check method requires it
-case $deplibs_check_method in
-file_magic*)
- if test "$file_magic_cmd" = '$MAGIC_CMD'; then
- echo "$as_me:$LINENO: checking for ${ac_tool_prefix}file" >&5
-echo $ECHO_N "checking for ${ac_tool_prefix}file... $ECHO_C" >&6
-if test "${lt_cv_path_MAGIC_CMD+set}" = set; then
- echo $ECHO_N "(cached) $ECHO_C" >&6
-else
- case $MAGIC_CMD in
- /*)
- lt_cv_path_MAGIC_CMD="$MAGIC_CMD" # Let the user override the test with a path.
- ;;
- ?:/*)
- lt_cv_path_MAGIC_CMD="$MAGIC_CMD" # Let the user override the test with a dos path.
- ;;
- *)
- ac_save_MAGIC_CMD="$MAGIC_CMD"
- IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":"
- ac_dummy="/usr/bin:$PATH"
- for ac_dir in $ac_dummy; do
- test -z "$ac_dir" && ac_dir=.
- if test -f $ac_dir/${ac_tool_prefix}file; then
- lt_cv_path_MAGIC_CMD="$ac_dir/${ac_tool_prefix}file"
- if test -n "$file_magic_test_file"; then
- case $deplibs_check_method in
- "file_magic "*)
- file_magic_regex="`expr \"$deplibs_check_method\" : \"file_magic \(.*\)\"`"
- MAGIC_CMD="$lt_cv_path_MAGIC_CMD"
- if eval $file_magic_cmd \$file_magic_test_file 2> /dev/null |
- egrep "$file_magic_regex" > /dev/null; then
- :
- else
- cat <<EOF 1>&2
-
-*** Warning: the command libtool uses to detect shared libraries,
-*** $file_magic_cmd, produces output that libtool cannot recognize.
-*** The result is that libtool may fail to recognize shared libraries
-*** as such. This will affect the creation of libtool libraries that
-*** depend on shared libraries, but programs linked with such libtool
-*** libraries will work regardless of this problem. Nevertheless, you
-*** may want to report the problem to your system manager and/or to
-*** bug-libtool@gnu.org
-
-EOF
- fi ;;
- esac
- fi
- break
- fi
- done
- IFS="$ac_save_ifs"
- MAGIC_CMD="$ac_save_MAGIC_CMD"
- ;;
-esac
-fi
-
-MAGIC_CMD="$lt_cv_path_MAGIC_CMD"
-if test -n "$MAGIC_CMD"; then
- echo "$as_me:$LINENO: result: $MAGIC_CMD" >&5
-echo "${ECHO_T}$MAGIC_CMD" >&6
-else
- echo "$as_me:$LINENO: result: no" >&5
-echo "${ECHO_T}no" >&6
-fi
-
-if test -z "$lt_cv_path_MAGIC_CMD"; then
- if test -n "$ac_tool_prefix"; then
- echo "$as_me:$LINENO: checking for file" >&5
-echo $ECHO_N "checking for file... $ECHO_C" >&6
-if test "${lt_cv_path_MAGIC_CMD+set}" = set; then
- echo $ECHO_N "(cached) $ECHO_C" >&6
-else
- case $MAGIC_CMD in
- /*)
- lt_cv_path_MAGIC_CMD="$MAGIC_CMD" # Let the user override the test with a path.
- ;;
- ?:/*)
- lt_cv_path_MAGIC_CMD="$MAGIC_CMD" # Let the user override the test with a dos path.
- ;;
- *)
- ac_save_MAGIC_CMD="$MAGIC_CMD"
- IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":"
- ac_dummy="/usr/bin:$PATH"
- for ac_dir in $ac_dummy; do
- test -z "$ac_dir" && ac_dir=.
- if test -f $ac_dir/file; then
- lt_cv_path_MAGIC_CMD="$ac_dir/file"
- if test -n "$file_magic_test_file"; then
- case $deplibs_check_method in
- "file_magic "*)
- file_magic_regex="`expr \"$deplibs_check_method\" : \"file_magic \(.*\)\"`"
- MAGIC_CMD="$lt_cv_path_MAGIC_CMD"
- if eval $file_magic_cmd \$file_magic_test_file 2> /dev/null |
- egrep "$file_magic_regex" > /dev/null; then
- :
- else
- cat <<EOF 1>&2
-
-*** Warning: the command libtool uses to detect shared libraries,
-*** $file_magic_cmd, produces output that libtool cannot recognize.
-*** The result is that libtool may fail to recognize shared libraries
-*** as such. This will affect the creation of libtool libraries that
-*** depend on shared libraries, but programs linked with such libtool
-*** libraries will work regardless of this problem. Nevertheless, you
-*** may want to report the problem to your system manager and/or to
-*** bug-libtool@gnu.org
-
-EOF
- fi ;;
- esac
- fi
- break
- fi
- done
- IFS="$ac_save_ifs"
- MAGIC_CMD="$ac_save_MAGIC_CMD"
- ;;
-esac
-fi
-
-MAGIC_CMD="$lt_cv_path_MAGIC_CMD"
-if test -n "$MAGIC_CMD"; then
- echo "$as_me:$LINENO: result: $MAGIC_CMD" >&5
-echo "${ECHO_T}$MAGIC_CMD" >&6
-else
- echo "$as_me:$LINENO: result: no" >&5
-echo "${ECHO_T}no" >&6
-fi
-
- else
- MAGIC_CMD=:
- fi
-fi
-
- fi
- ;;
-esac
-
-if test -n "$ac_tool_prefix"; then
- # Extract the first word of "${ac_tool_prefix}ranlib", so it can be a program name with args.
-set dummy ${ac_tool_prefix}ranlib; ac_word=$2
-echo "$as_me:$LINENO: checking for $ac_word" >&5
-echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
-if test "${ac_cv_prog_RANLIB+set}" = set; then
- echo $ECHO_N "(cached) $ECHO_C" >&6
-else
- if test -n "$RANLIB"; then
- ac_cv_prog_RANLIB="$RANLIB" # Let the user override the test.
-else
-as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
- IFS=$as_save_IFS
- test -z "$as_dir" && as_dir=.
- for ac_exec_ext in '' $ac_executable_extensions; do
- if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
- ac_cv_prog_RANLIB="${ac_tool_prefix}ranlib"
- echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
- break 2
- fi
-done
-done
-
-fi
-fi
-RANLIB=$ac_cv_prog_RANLIB
-if test -n "$RANLIB"; then
- echo "$as_me:$LINENO: result: $RANLIB" >&5
-echo "${ECHO_T}$RANLIB" >&6
-else
- echo "$as_me:$LINENO: result: no" >&5
-echo "${ECHO_T}no" >&6
-fi
-
-fi
-if test -z "$ac_cv_prog_RANLIB"; then
- ac_ct_RANLIB=$RANLIB
- # Extract the first word of "ranlib", so it can be a program name with args.
-set dummy ranlib; ac_word=$2
-echo "$as_me:$LINENO: checking for $ac_word" >&5
-echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
-if test "${ac_cv_prog_ac_ct_RANLIB+set}" = set; then
- echo $ECHO_N "(cached) $ECHO_C" >&6
-else
- if test -n "$ac_ct_RANLIB"; then
- ac_cv_prog_ac_ct_RANLIB="$ac_ct_RANLIB" # Let the user override the test.
-else
-as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
- IFS=$as_save_IFS
- test -z "$as_dir" && as_dir=.
- for ac_exec_ext in '' $ac_executable_extensions; do
- if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
- ac_cv_prog_ac_ct_RANLIB="ranlib"
- echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
- break 2
- fi
-done
-done
-
- test -z "$ac_cv_prog_ac_ct_RANLIB" && ac_cv_prog_ac_ct_RANLIB=":"
-fi
-fi
-ac_ct_RANLIB=$ac_cv_prog_ac_ct_RANLIB
-if test -n "$ac_ct_RANLIB"; then
- echo "$as_me:$LINENO: result: $ac_ct_RANLIB" >&5
-echo "${ECHO_T}$ac_ct_RANLIB" >&6
-else
- echo "$as_me:$LINENO: result: no" >&5
-echo "${ECHO_T}no" >&6
-fi
-
- RANLIB=$ac_ct_RANLIB
-else
- RANLIB="$ac_cv_prog_RANLIB"
-fi
-
-if test -n "$ac_tool_prefix"; then
- # Extract the first word of "${ac_tool_prefix}strip", so it can be a program name with args.
-set dummy ${ac_tool_prefix}strip; ac_word=$2
-echo "$as_me:$LINENO: checking for $ac_word" >&5
-echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
-if test "${ac_cv_prog_STRIP+set}" = set; then
- echo $ECHO_N "(cached) $ECHO_C" >&6
-else
- if test -n "$STRIP"; then
- ac_cv_prog_STRIP="$STRIP" # Let the user override the test.
-else
-as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
- IFS=$as_save_IFS
- test -z "$as_dir" && as_dir=.
- for ac_exec_ext in '' $ac_executable_extensions; do
- if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
- ac_cv_prog_STRIP="${ac_tool_prefix}strip"
- echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
- break 2
- fi
-done
-done
-
-fi
-fi
-STRIP=$ac_cv_prog_STRIP
-if test -n "$STRIP"; then
- echo "$as_me:$LINENO: result: $STRIP" >&5
-echo "${ECHO_T}$STRIP" >&6
-else
- echo "$as_me:$LINENO: result: no" >&5
-echo "${ECHO_T}no" >&6
-fi
-
-fi
-if test -z "$ac_cv_prog_STRIP"; then
- ac_ct_STRIP=$STRIP
- # Extract the first word of "strip", so it can be a program name with args.
-set dummy strip; ac_word=$2
-echo "$as_me:$LINENO: checking for $ac_word" >&5
-echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
-if test "${ac_cv_prog_ac_ct_STRIP+set}" = set; then
- echo $ECHO_N "(cached) $ECHO_C" >&6
-else
- if test -n "$ac_ct_STRIP"; then
- ac_cv_prog_ac_ct_STRIP="$ac_ct_STRIP" # Let the user override the test.
-else
-as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
- IFS=$as_save_IFS
- test -z "$as_dir" && as_dir=.
- for ac_exec_ext in '' $ac_executable_extensions; do
- if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
- ac_cv_prog_ac_ct_STRIP="strip"
- echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
- break 2
- fi
-done
-done
-
- test -z "$ac_cv_prog_ac_ct_STRIP" && ac_cv_prog_ac_ct_STRIP=":"
-fi
-fi
-ac_ct_STRIP=$ac_cv_prog_ac_ct_STRIP
-if test -n "$ac_ct_STRIP"; then
- echo "$as_me:$LINENO: result: $ac_ct_STRIP" >&5
-echo "${ECHO_T}$ac_ct_STRIP" >&6
-else
- echo "$as_me:$LINENO: result: no" >&5
-echo "${ECHO_T}no" >&6
-fi
-
- STRIP=$ac_ct_STRIP
-else
- STRIP="$ac_cv_prog_STRIP"
-fi
-
-
-# Check for any special flags to pass to ltconfig.
-libtool_flags="--cache-file=$cache_file"
-test "$enable_shared" = no && libtool_flags="$libtool_flags --disable-shared"
-test "$enable_static" = no && libtool_flags="$libtool_flags --disable-static"
-test "$enable_fast_install" = no && libtool_flags="$libtool_flags --disable-fast-install"
-test "$GCC" = yes && libtool_flags="$libtool_flags --with-gcc"
-test "$lt_cv_prog_gnu_ld" = yes && libtool_flags="$libtool_flags --with-gnu-ld"
-
-
-# Check whether --enable-libtool-lock or --disable-libtool-lock was given.
-if test "${enable_libtool_lock+set}" = set; then
- enableval="$enable_libtool_lock"
-
-fi;
-test "x$enable_libtool_lock" = xno && libtool_flags="$libtool_flags --disable-lock"
-test x"$silent" = xyes && libtool_flags="$libtool_flags --silent"
-
-
-# Check whether --with-pic or --without-pic was given.
-if test "${with_pic+set}" = set; then
- withval="$with_pic"
- pic_mode="$withval"
-else
- pic_mode=default
-fi;
-test x"$pic_mode" = xyes && libtool_flags="$libtool_flags --prefer-pic"
-test x"$pic_mode" = xno && libtool_flags="$libtool_flags --prefer-non-pic"
-
-# Some flags need to be propagated to the compiler or linker for good
-# libtool support.
-case $host in
-*-*-irix6*)
- # Find out which ABI we are using.
- echo '#line 4071 "configure"' > conftest.$ac_ext
- if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
- (eval $ac_compile) 2>&5
- ac_status=$?
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); }; then
- if test "$lt_cv_prog_gnu_ld" = yes; then
- case `/usr/bin/file conftest.$ac_objext` in
- *32-bit*)
- LD="${LD-ld} -melf32bsmip"
- ;;
- *N32*)
- LD="${LD-ld} -melf32bmipn32"
- ;;
- *64-bit*)
- LD="${LD-ld} -melf64bmip"
- ;;
- esac
- else
- case `/usr/bin/file conftest.$ac_objext` in
- *32-bit*)
- LD="${LD-ld} -32"
- ;;
- *N32*)
- LD="${LD-ld} -n32"
- ;;
- *64-bit*)
- LD="${LD-ld} -64"
- ;;
- esac
- fi
- fi
- rm -rf conftest*
- ;;
-
-ia64-*-hpux*)
- # Find out which ABI we are using.
- echo 'int i;' > conftest.$ac_ext
- if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
- (eval $ac_compile) 2>&5
+ cat conftest.err >&5
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); } &&
+ { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err'
+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
ac_status=$?
echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); }; then
- case "`/usr/bin/file conftest.o`" in
- *ELF-32*)
- HPUX_IA64_MODE="32"
- ;;
- *ELF-64*)
- HPUX_IA64_MODE="64"
- ;;
- esac
- fi
- rm -rf conftest*
- ;;
-
-x86_64-*linux*|ppc*-*linux*|powerpc*-*linux*|s390*-*linux*|sparc*-*linux*)
- # Find out which ABI we are using.
- echo 'int i;' > conftest.$ac_ext
- if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
- (eval $ac_compile) 2>&5
+ (exit $ac_status); }; } &&
+ { ac_try='test -s conftest.$ac_objext'
+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
ac_status=$?
echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); }; then
- case "`/usr/bin/file conftest.o`" in
- *32-bit*)
- case $host in
- x86_64-*linux*)
- LD="${LD-ld} -m elf_i386"
- ;;
- ppc64-*linux*|powerpc64-*linux*)
- LD="${LD-ld} -m elf32ppclinux"
- ;;
- s390x-*linux*)
- LD="${LD-ld} -m elf_s390"
- ;;
- sparc64-*linux*)
- LD="${LD-ld} -m elf32_sparc"
- ;;
- esac
- ;;
- *64-bit*)
- case $host in
- x86_64-*linux*)
- LD="${LD-ld} -m elf_x86_64"
- ;;
- ppc*-*linux*|powerpc*-*linux*)
- LD="${LD-ld} -m elf64ppc"
- ;;
- s390*-*linux*)
- LD="${LD-ld} -m elf64_s390"
- ;;
- sparc*-*linux*)
- LD="${LD-ld} -m elf64_sparc"
- ;;
- esac
- ;;
- esac
- fi
- rm -rf conftest*
- ;;
-
-*-*-sco3.2v5*)
- # On SCO OpenServer 5, we need -belf to get full-featured binaries.
- SAVE_CFLAGS="$CFLAGS"
- CFLAGS="$CFLAGS -belf"
- echo "$as_me:$LINENO: checking whether the C compiler needs -belf" >&5
-echo $ECHO_N "checking whether the C compiler needs -belf... $ECHO_C" >&6
-if test "${lt_cv_cc_needs_belf+set}" = set; then
- echo $ECHO_N "(cached) $ECHO_C" >&6
-else
-
-
- ac_ext=c
-ac_cpp='$CPP $CPPFLAGS'
-ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
-ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
-ac_compiler_gnu=$ac_cv_c_compiler_gnu
-
- if test x$gcc_no_link = xyes; then
- { { echo "$as_me:$LINENO: error: Link tests are not allowed after GCC_NO_EXECUTABLES." >&5
-echo "$as_me: error: Link tests are not allowed after GCC_NO_EXECUTABLES." >&2;}
- { (exit 1); exit 1; }; }
-fi
+ (exit $ac_status); }; }; then
+ # It does; now see whether it defined to BIG_ENDIAN or not.
cat >conftest.$ac_ext <<_ACEOF
/* confdefs.h. */
_ACEOF
cat confdefs.h >>conftest.$ac_ext
cat >>conftest.$ac_ext <<_ACEOF
/* end confdefs.h. */
-
+#include <sys/types.h>
+#include <sys/param.h>
int
main ()
{
+#if BYTE_ORDER != BIG_ENDIAN
+ not big endian
+#endif
;
return 0;
}
_ACEOF
-rm -f conftest.$ac_objext conftest$ac_exeext
-if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
- (eval $ac_link) 2>conftest.er1
+rm -f conftest.$ac_objext
+if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
+ (eval $ac_compile) 2>conftest.er1
ac_status=$?
grep -v '^ *+' conftest.er1 >conftest.err
rm -f conftest.er1
cat conftest.err >&5
echo "$as_me:$LINENO: \$? = $ac_status" >&5
(exit $ac_status); } &&
- { ac_try='test -z "$ac_c_werror_flag"
- || test ! -s conftest.err'
+ { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err'
{ (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
(eval $ac_try) 2>&5
ac_status=$?
echo "$as_me:$LINENO: \$? = $ac_status" >&5
(exit $ac_status); }; } &&
- { ac_try='test -s conftest$ac_exeext'
+ { ac_try='test -s conftest.$ac_objext'
{ (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
(eval $ac_try) 2>&5
ac_status=$?
echo "$as_me:$LINENO: \$? = $ac_status" >&5
(exit $ac_status); }; }; then
- lt_cv_cc_needs_belf=yes
+ ac_cv_c_bigendian=yes
else
echo "$as_me: failed program was:" >&5
sed 's/^/| /' conftest.$ac_ext >&5
-lt_cv_cc_needs_belf=no
+ac_cv_c_bigendian=no
fi
-rm -f conftest.err conftest.$ac_objext \
- conftest$ac_exeext conftest.$ac_ext
- ac_ext=c
-ac_cpp='$CPP $CPPFLAGS'
-ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
-ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
-ac_compiler_gnu=$ac_cv_c_compiler_gnu
+rm -f conftest.err conftest.$ac_objext conftest.$ac_ext
+else
+ echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
fi
-echo "$as_me:$LINENO: result: $lt_cv_cc_needs_belf" >&5
-echo "${ECHO_T}$lt_cv_cc_needs_belf" >&6
- if test x"$lt_cv_cc_needs_belf" != x"yes"; then
- # this is probably gcc 2.8.0, egcs 1.0 or newer; no need for -belf
- CFLAGS="$SAVE_CFLAGS"
- fi
- ;;
-
-
-esac
-
-
-# Save cache, so that ltconfig can load it
-cat >confcache <<\_ACEOF
-# This file is a shell script that caches the results of configure
-# tests run on this system so they can be shared between configure
-# scripts and configure runs, see configure's option --config-cache.
-# It is not useful on other systems. If it contains results you don't
-# want to keep, you may remove or edit it.
-#
-# config.status only pays attention to the cache file if you give it
-# the --recheck option to rerun configure.
-#
-# `ac_cv_env_foo' variables (set or unset) will be overridden when
-# loading this file, other *unset* `ac_cv_foo' will be assigned the
-# following values.
-
+rm -f conftest.err conftest.$ac_objext conftest.$ac_ext
+if test $ac_cv_c_bigendian = unknown; then
+if test "$cross_compiling" = yes; then
+ echo $ac_n "cross-compiling... " 2>&6
+else
+ cat >conftest.$ac_ext <<_ACEOF
+/* confdefs.h. */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h. */
+main () {
+ /* Are we little or big endian? From Harbison&Steele. */
+ union
+ {
+ long l;
+ char c[sizeof (long)];
+ } u;
+ u.l = 1;
+ exit (u.c[sizeof (long) - 1] == 1);
+}
_ACEOF
+rm -f conftest$ac_exeext
+if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
+ (eval $ac_link) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); } && { ac_try='./conftest$ac_exeext'
+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }; }; then
+ ac_cv_c_bigendian=no
+else
+ echo "$as_me: program exited with status $ac_status" >&5
+echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
-# The following way of writing the cache mishandles newlines in values,
-# but we know of no workaround that is simple, portable, and efficient.
-# So, don't put newlines in cache variables' values.
-# Ultrix sh set writes to stderr and can't be redirected directly,
-# and sets the high bit in the cache file unless we assign to the vars.
-{
- (set) 2>&1 |
- case `(ac_space=' '; set | grep ac_space) 2>&1` in
- *ac_space=\ *)
- # `set' does not quote correctly, so add quotes (double-quote
- # substitution turns \\\\ into \\, and sed turns \\ into \).
- sed -n \
- "s/'/'\\\\''/g;
- s/^\\([_$as_cr_alnum]*_cv_[_$as_cr_alnum]*\\)=\\(.*\\)/\\1='\\2'/p"
- ;;
- *)
- # `set' quotes correctly as required by POSIX, so do not add quotes.
- sed -n \
- "s/^\\([_$as_cr_alnum]*_cv_[_$as_cr_alnum]*\\)=\\(.*\\)/\\1=\\2/p"
- ;;
- esac;
-} |
- sed '
- t clear
- : clear
- s/^\([^=]*\)=\(.*[{}].*\)$/test "${\1+set}" = set || &/
- t end
- /^ac_cv_env/!s/^\([^=]*\)=\(.*\)$/\1=${\1=\2}/
- : end' >>confcache
-if diff $cache_file confcache >/dev/null 2>&1; then :; else
- if test -w $cache_file; then
- test "x$cache_file" != "x/dev/null" && echo "updating cache $cache_file"
- cat confcache >$cache_file
- else
- echo "not updating unwritable cache $cache_file"
- fi
+( exit $ac_status )
+ac_cv_c_bigendian=yes
fi
-rm -f confcache
-
-# Actually configure libtool. ac_aux_dir is where install-sh is found.
-AR="$AR" LTCC="$CC" CC="$CC" CFLAGS="$CFLAGS" CPPFLAGS="$CPPFLAGS" \
-MAGIC_CMD="$MAGIC_CMD" LD="$LD" LDFLAGS="$LDFLAGS" LIBS="$LIBS" \
-LN_S="$LN_S" NM="$NM" RANLIB="$RANLIB" STRIP="$STRIP" \
-AS="$AS" DLLTOOL="$DLLTOOL" OBJDUMP="$OBJDUMP" \
-objext="$OBJEXT" exeext="$EXEEXT" reload_flag="$reload_flag" \
-deplibs_check_method="$deplibs_check_method" file_magic_cmd="$file_magic_cmd" \
-${CONFIG_SHELL-/bin/sh} $ac_aux_dir/ltconfig --no-reexec \
-$libtool_flags --no-verify --build="$build" $ac_aux_dir/ltmain.sh $host \
-|| { { echo "$as_me:$LINENO: error: libtool configure failed" >&5
-echo "$as_me: error: libtool configure failed" >&2;}
- { (exit 1); exit 1; }; }
+rm -f core *.core gmon.out bb.out conftest$ac_exeext conftest.$ac_objext conftest.$ac_ext
+fi
+fi
+fi
+echo "$as_me:$LINENO: result: $ac_cv_c_bigendian" >&5
+echo "${ECHO_T}$ac_cv_c_bigendian" >&6
+if test $ac_cv_c_bigendian = unknown; then
+echo "$as_me:$LINENO: checking to probe for byte ordering" >&5
+echo $ECHO_N "checking to probe for byte ordering... $ECHO_C" >&6
-# Reload cache, that may have been modified by ltconfig
-if test -r "$cache_file"; then
- # Some versions of bash will fail to source /dev/null (special
- # files actually), so we avoid doing that.
- if test -f "$cache_file"; then
- { echo "$as_me:$LINENO: loading cache $cache_file" >&5
-echo "$as_me: loading cache $cache_file" >&6;}
- case $cache_file in
- [\\/]* | ?:[\\/]* ) . $cache_file;;
- *) . ./$cache_file;;
- esac
+cat >conftest.c <<EOF
+short ascii_mm[] = { 0x4249, 0x4765, 0x6E44, 0x6961, 0x6E53, 0x7953, 0 };
+short ascii_ii[] = { 0x694C, 0x5454, 0x656C, 0x6E45, 0x6944, 0x6E61, 0 };
+void _ascii() { char* s = (char*) ascii_mm; s = (char*) ascii_ii; }
+short ebcdic_ii[] = { 0x89D3, 0xE3E3, 0x8593, 0x95C5, 0x89C4, 0x9581, 0 };
+short ebcdic_mm[] = { 0xC2C9, 0xC785, 0x95C4, 0x8981, 0x95E2, 0xA8E2, 0 };
+void _ebcdic() { char* s = (char*) ebcdic_mm; s = (char*) ebcdic_ii; }
+int main() { _ascii (); _ebcdic (); return 0; }
+EOF
+ if test -f conftest.c ; then
+ if ${CC-cc} ${CFLAGS} -c conftest.c -o conftest.o && test -f conftest.o ; then
+ if test `grep -l BIGenDianSyS conftest.o` ; then
+ echo $ac_n ' big endian probe OK, ' 1>&6
+ ac_cv_c_bigendian=yes
+ fi
+ if test `grep -l LiTTleEnDian conftest.o` ; then
+ echo $ac_n ' little endian probe OK, ' 1>&6
+ if test $ac_cv_c_bigendian = yes ; then
+ ac_cv_c_bigendian=unknown;
+ else
+ ac_cv_c_bigendian=no
+ fi
+ fi
+ echo $ac_n 'guessing bigendian ... ' >&6
+ fi
fi
-else
- { echo "$as_me:$LINENO: creating cache $cache_file" >&5
-echo "$as_me: creating cache $cache_file" >&6;}
- >$cache_file
+echo "$as_me:$LINENO: result: $ac_cv_c_bigendian" >&5
+echo "${ECHO_T}$ac_cv_c_bigendian" >&6
fi
+if test $ac_cv_c_bigendian = yes; then
+cat >>confdefs.h <<\_ACEOF
+#define WORDS_BIGENDIAN 1
+_ACEOF
-# This can be used to rebuild libtool when needed
-LIBTOOL_DEPS="$ac_aux_dir/ltconfig $ac_aux_dir/ltmain.sh $ac_aux_dir/ltcf-c.sh"
-
-# Always use our own libtool.
-LIBTOOL='$(SHELL) $(top_builddir)/libtool'
-# Redirect the config.log output again, so that the ltconfig log is not
-# clobbered by the next message.
-exec 5>>./config.log
+cat >>confdefs.h <<\_ACEOF
+#define HOST_WORDS_BIG_ENDIAN 1
+_ACEOF
+ BYTEORDER=4321
+else
+ BYTEORDER=1234
+fi
+cat >>confdefs.h <<_ACEOF
+#define BYTEORDER $BYTEORDER
+_ACEOF
+if test $ac_cv_c_bigendian = unknown; then
+ { { echo "$as_me:$LINENO: error: unknown endianess - sorry, please pre-set ac_cv_c_bigendian" >&5
+echo "$as_me: error: unknown endianess - sorry, please pre-set ac_cv_c_bigendian" >&2;}
+ { (exit 1); exit 1; }; }
+fi
cat conftest.err >&5
echo "$as_me:$LINENO: \$? = $ac_status" >&5
(exit $ac_status); } &&
- { ac_try='test -z "$ac_c_werror_flag"
- || test ! -s conftest.err'
+ { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err'
{ (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
(eval $ac_try) 2>&5
ac_status=$?
cat conftest.err >&5
echo "$as_me:$LINENO: \$? = $ac_status" >&5
(exit $ac_status); } &&
- { ac_try='test -z "$ac_c_werror_flag"
- || test ! -s conftest.err'
+ { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err'
{ (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
(eval $ac_try) 2>&5
ac_status=$?
cat conftest.err >&5
echo "$as_me:$LINENO: \$? = $ac_status" >&5
(exit $ac_status); } &&
- { ac_try='test -z "$ac_c_werror_flag"
- || test ! -s conftest.err'
+ { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err'
{ (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
(eval $ac_try) 2>&5
ac_status=$?
cat conftest.err >&5
echo "$as_me:$LINENO: \$? = $ac_status" >&5
(exit $ac_status); } &&
- { ac_try='test -z "$ac_c_werror_flag"
- || test ! -s conftest.err'
+ { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err'
{ (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
(eval $ac_try) 2>&5
ac_status=$?
cat conftest.err >&5
echo "$as_me:$LINENO: \$? = $ac_status" >&5
(exit $ac_status); } &&
- { ac_try='test -z "$ac_c_werror_flag"
- || test ! -s conftest.err'
+ { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err'
{ (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
(eval $ac_try) 2>&5
ac_status=$?
cat conftest.err >&5
echo "$as_me:$LINENO: \$? = $ac_status" >&5
(exit $ac_status); } &&
- { ac_try='test -z "$ac_c_werror_flag"
- || test ! -s conftest.err'
+ { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err'
{ (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
(eval $ac_try) 2>&5
ac_status=$?
cat conftest.err >&5
echo "$as_me:$LINENO: \$? = $ac_status" >&5
(exit $ac_status); } &&
- { ac_try='test -z "$ac_c_werror_flag"
- || test ! -s conftest.err'
+ { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err'
{ (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
(eval $ac_try) 2>&5
ac_status=$?
cat conftest.err >&5
echo "$as_me:$LINENO: \$? = $ac_status" >&5
(exit $ac_status); } &&
- { ac_try='test -z "$ac_c_werror_flag"
- || test ! -s conftest.err'
+ { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err'
{ (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
(eval $ac_try) 2>&5
ac_status=$?
cat conftest.err >&5
echo "$as_me:$LINENO: \$? = $ac_status" >&5
(exit $ac_status); } &&
- { ac_try='test -z "$ac_c_werror_flag"
- || test ! -s conftest.err'
+ { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err'
{ (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
(eval $ac_try) 2>&5
ac_status=$?
cat conftest.err >&5
echo "$as_me:$LINENO: \$? = $ac_status" >&5
(exit $ac_status); } &&
- { ac_try='test -z "$ac_c_werror_flag"
- || test ! -s conftest.err'
+ { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err'
{ (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
(eval $ac_try) 2>&5
ac_status=$?
esac
else
if test "$cross_compiling" = yes; then
- { { echo "$as_me:$LINENO: error: cannot run test program while cross compiling
-See \`config.log' for more details." >&5
-echo "$as_me: error: cannot run test program while cross compiling
-See \`config.log' for more details." >&2;}
+ { { echo "$as_me:$LINENO: error: internal error: not reached in cross-compile" >&5
+echo "$as_me: error: internal error: not reached in cross-compile" >&2;}
{ (exit 1); exit 1; }; }
else
cat >conftest.$ac_ext <<_ACEOF
cat conftest.err >&5
echo "$as_me:$LINENO: \$? = $ac_status" >&5
(exit $ac_status); } &&
- { ac_try='test -z "$ac_c_werror_flag"
- || test ! -s conftest.err'
+ { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err'
{ (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
(eval $ac_try) 2>&5
ac_status=$?
cat conftest.err >&5
echo "$as_me:$LINENO: \$? = $ac_status" >&5
(exit $ac_status); } &&
- { ac_try='test -z "$ac_c_werror_flag"
- || test ! -s conftest.err'
+ { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err'
{ (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
(eval $ac_try) 2>&5
ac_status=$?
cat conftest.err >&5
echo "$as_me:$LINENO: \$? = $ac_status" >&5
(exit $ac_status); } &&
- { ac_try='test -z "$ac_c_werror_flag"
- || test ! -s conftest.err'
+ { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err'
{ (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
(eval $ac_try) 2>&5
ac_status=$?
cat conftest.err >&5
echo "$as_me:$LINENO: \$? = $ac_status" >&5
(exit $ac_status); } &&
- { ac_try='test -z "$ac_c_werror_flag"
- || test ! -s conftest.err'
+ { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err'
{ (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
(eval $ac_try) 2>&5
ac_status=$?
cat conftest.err >&5
echo "$as_me:$LINENO: \$? = $ac_status" >&5
(exit $ac_status); } &&
- { ac_try='test -z "$ac_c_werror_flag"
- || test ! -s conftest.err'
+ { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err'
{ (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
(eval $ac_try) 2>&5
ac_status=$?
cat conftest.err >&5
echo "$as_me:$LINENO: \$? = $ac_status" >&5
(exit $ac_status); } &&
- { ac_try='test -z "$ac_c_werror_flag"
- || test ! -s conftest.err'
+ { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err'
{ (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
(eval $ac_try) 2>&5
ac_status=$?
cat conftest.err >&5
echo "$as_me:$LINENO: \$? = $ac_status" >&5
(exit $ac_status); } &&
- { ac_try='test -z "$ac_c_werror_flag"
- || test ! -s conftest.err'
+ { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err'
{ (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
(eval $ac_try) 2>&5
ac_status=$?
cat conftest.err >&5
echo "$as_me:$LINENO: \$? = $ac_status" >&5
(exit $ac_status); } &&
- { ac_try='test -z "$ac_c_werror_flag"
- || test ! -s conftest.err'
+ { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err'
{ (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
(eval $ac_try) 2>&5
ac_status=$?
cat conftest.err >&5
echo "$as_me:$LINENO: \$? = $ac_status" >&5
(exit $ac_status); } &&
- { ac_try='test -z "$ac_c_werror_flag"
- || test ! -s conftest.err'
+ { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err'
{ (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
(eval $ac_try) 2>&5
ac_status=$?
cat conftest.err >&5
echo "$as_me:$LINENO: \$? = $ac_status" >&5
(exit $ac_status); } &&
- { ac_try='test -z "$ac_c_werror_flag"
- || test ! -s conftest.err'
+ { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err'
{ (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
(eval $ac_try) 2>&5
ac_status=$?
cat conftest.err >&5
echo "$as_me:$LINENO: \$? = $ac_status" >&5
(exit $ac_status); } &&
- { ac_try='test -z "$ac_c_werror_flag"
- || test ! -s conftest.err'
+ { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err'
{ (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
(eval $ac_try) 2>&5
ac_status=$?
cat conftest.err >&5
echo "$as_me:$LINENO: \$? = $ac_status" >&5
(exit $ac_status); } &&
- { ac_try='test -z "$ac_c_werror_flag"
- || test ! -s conftest.err'
+ { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err'
{ (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
(eval $ac_try) 2>&5
ac_status=$?
cat conftest.err >&5
echo "$as_me:$LINENO: \$? = $ac_status" >&5
(exit $ac_status); } &&
- { ac_try='test -z "$ac_c_werror_flag"
- || test ! -s conftest.err'
+ { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err'
{ (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
(eval $ac_try) 2>&5
ac_status=$?
cat conftest.err >&5
echo "$as_me:$LINENO: \$? = $ac_status" >&5
(exit $ac_status); } &&
- { ac_try='test -z "$ac_c_werror_flag"
- || test ! -s conftest.err'
+ { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err'
{ (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
(eval $ac_try) 2>&5
ac_status=$?
cat conftest.err >&5
echo "$as_me:$LINENO: \$? = $ac_status" >&5
(exit $ac_status); } &&
- { ac_try='test -z "$ac_c_werror_flag"
- || test ! -s conftest.err'
+ { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err'
{ (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
(eval $ac_try) 2>&5
ac_status=$?
cat conftest.err >&5
echo "$as_me:$LINENO: \$? = $ac_status" >&5
(exit $ac_status); } &&
- { ac_try='test -z "$ac_c_werror_flag"
- || test ! -s conftest.err'
+ { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err'
{ (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
(eval $ac_try) 2>&5
ac_status=$?
cat conftest.err >&5
echo "$as_me:$LINENO: \$? = $ac_status" >&5
(exit $ac_status); } &&
- { ac_try='test -z "$ac_c_werror_flag"
- || test ! -s conftest.err'
+ { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err'
{ (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
(eval $ac_try) 2>&5
ac_status=$?
# Figure out which version of pexecute to use.
case "${host}" in
- *-*-mingw* | *-*-winnt*) pex=./pex-win32 ;;
- *-*-msdosdjgpp*) pex=./pex-djgpp ;;
- *-*-msdos*) pex=./pex-msdos ;;
- *-*-os2-emx*) pex=./pex-os2 ;;
- *) pex=./pex-unix ;;
+ *-*-mingw* | *-*-winnt*) pexecute=./pex-win32.o ;;
+ *-*-msdosdjgpp*) pexecute=./pex-djgpp.o ;;
+ *-*-msdos*) pexecute=./pex-msdos.o ;;
+ *-*-os2-emx*) pexecute=./pex-os2.o ;;
+ *) pexecute=./pex-unix.o ;;
esac
-pexecute=${pex}.o
-ltpexecute=${pex}.lo
-
if test x$gcc_no_link = xyes; then
cat conftest.err >&5
echo "$as_me:$LINENO: \$? = $ac_status" >&5
(exit $ac_status); } &&
- { ac_try='test -z "$ac_c_werror_flag"
- || test ! -s conftest.err'
+ { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err'
{ (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
(eval $ac_try) 2>&5
ac_status=$?
fi
-# Add `./' to avoid VPATH.
L=""
for l in x $LIBOBJS; do
done
LIBOBJS="$L"
-
-L=""
-for l in x $LTLIBOBJS; do
- case $l in
- x) ;;
- *) L="$L ./$l" ;;
- esac
-done
-LTLIBOBJS="$L"
-
-
-
# We need multilib support, but only if configuring for the target.
ac_config_files="$ac_config_files Makefile testsuite/Makefile"
s,@OBJEXT@,$OBJEXT,;t t
s,@CPP@,$CPP,;t t
s,@ac_libiberty_warn_cflags@,$ac_libiberty_warn_cflags,;t t
-s,@LN_S@,$LN_S,;t t
-s,@STRIP@,$STRIP,;t t
-s,@ac_ct_STRIP@,$ac_ct_STRIP,;t t
-s,@LIBTOOL@,$LIBTOOL,;t t
+s,@NO_MINUS_C_MINUS_O@,$NO_MINUS_C_MINUS_O,;t t
+s,@OUTPUT_OPTION@,$OUTPUT_OPTION,;t t
s,@INSTALL_PROGRAM@,$INSTALL_PROGRAM,;t t
s,@INSTALL_SCRIPT@,$INSTALL_SCRIPT,;t t
s,@INSTALL_DATA@,$INSTALL_DATA,;t t
s,@CHECK@,$CHECK,;t t
s,@target_header_dir@,$target_header_dir,;t t
s,@pexecute@,$pexecute,;t t
-s,@ltpexecute@,$ltpexecute,;t t
s,@INSTALL_DEST@,$INSTALL_DEST,;t t
-s,@enable_shared@,$enable_shared,;t t
s,@LTLIBOBJS@,$LTLIBOBJS,;t t
/@host_makefile_frag@/r $host_makefile_frag
s,@host_makefile_frag@,,;t t
*) ac_INSTALL=$ac_top_builddir$INSTALL ;;
esac
- if test x"$ac_file" != x-; then
- { echo "$as_me:$LINENO: creating $ac_file" >&5
-echo "$as_me: creating $ac_file" >&6;}
- rm -f "$ac_file"
- fi
# Let's still pretend it is `configure' which instantiates (i.e., don't
# use $as_me), people would be surprised to read:
# /* config.h. Generated by config.status. */
fi;;
esac
done` || { (exit 1); exit 1; }
+
+ if test x"$ac_file" != x-; then
+ { echo "$as_me:$LINENO: creating $ac_file" >&5
+echo "$as_me: creating $ac_file" >&6;}
+ rm -f "$ac_file"
+ fi
_ACEOF
cat >>$CONFIG_STATUS <<_ACEOF
sed "$ac_vpsub
projects / binutils-gdb.git / commitdiff