+2021-01-08 Mike Frysinger <vapier@gentoo.org>
+
+ * README-HACKING (C Language Assumptions): Require C11 compiler.
+
2020-09-03 Jose E. Marchesi <jose.marchesi@oracle.com>
* configure.ac: Do not configure sim/testsuite nor sim/igen if the
C Language Assumptions
======================
-The programmer may assume that the simulator is being built using an
-ANSI C compiler that supports a 64 bit data type. Consequently:
-
- o prototypes can be used
-
- o If sim-types.h is included, the two
- types signed64 and unsigned64 are
- available.
-
- o The type `unsigned' is valid.
-
-However, the user should be aware of the following:
-
- o GCC's `<number>LL' is NOT acceptable.
- Microsoft-C doesn't reconize it.
-
- o MSC's `<number>i64' is NOT acceptable.
- GCC doesn't reconize it.
-
- o GCC's `long long' MSC's `_int64' can
- NOT be used to define 64 bit integer data
- types.
-
- o An empty array (eg int a[0]) is not valid.
-
-When building with GCC it is effectivly a requirement that
---enable-build-warnings=,-Werror be specified during configuration.
+An ISO C11 compiler is required, as is an ISO C standard library.
\f
"dump" commands under gdb
=========================
+2021-01-08 Mike Frysinger <vapier@gentoo.org>
+
+ * configure: Regenerate.
+
2021-01-04 Mike Frysinger <vapier@gentoo.org>
* configure: Regenerate.
DEPDIR
am__leading_dot
PACKAGE
+C_DIALECT
RANLIB
AR
HDEFINES
fi
+# Require C11 or newer. Autoconf-2.70 provides ac_cv_prog_cc_c11 when using
+# AC_PROG_CC, but we're still using Autoconf-2.69, and the newest it understands
+# is C99. So handle it ourselves.
+:
+C_DIALECT=
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether C11 is supported by default" >&5
+$as_echo_n "checking whether C11 is supported by default... " >&6; }
+cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h. */
+
+#if !defined __STDC_VERSION__ || __STDC_VERSION__ < 201112L
+# error "C11 support not found"
+#endif
+
+_ACEOF
+if ac_fn_c_try_compile "$LINENO"; then :
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5
+$as_echo "yes" >&6; }
+else
+
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking for -std=c11 support" >&5
+$as_echo_n "checking for -std=c11 support... " >&6; }
+ ac_save_CC="$CC"
+ CC="$CC -std=c11"
+ cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h. */
+
+#if !defined __STDC_VERSION__ || __STDC_VERSION__ < 201112L
+# error "C11 support not found"
+#endif
+
+_ACEOF
+if ac_fn_c_try_compile "$LINENO"; then :
+
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5
+$as_echo "yes" >&6; }
+ CC="$ac_save_CC"
+ C_DIALECT="-std=c11"
+
+else
+ as_fn_error $? "C11 is required" "$LINENO" 5
+fi
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+fi
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+
+
# Some of the common include files depend on bfd.h, and bfd.h checks
# that config.h is included first by testing that the PACKAGE macro
# is defined.
esac
;;
-gnu*)
- version_type=linux
- need_lib_prefix=no
- need_version=no
- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}${major} ${libname}${shared_ext}'
- soname_spec='${libname}${release}${shared_ext}$major'
- shlibpath_var=LD_LIBRARY_PATH
- hardcode_into_libs=yes
- ;;
-
haiku*)
version_type=linux
need_lib_prefix=no
;;
# This must be Linux ELF.
-linux* | k*bsd*-gnu | kopensolaris*-gnu)
+linux* | k*bsd*-gnu | kopensolaris*-gnu | gnu*)
version_type=linux
need_lib_prefix=no
need_version=no
lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2
lt_status=$lt_dlunknown
cat > conftest.$ac_ext <<_LT_EOF
-#line 12882 "configure"
+#line 12922 "configure"
#include "confdefs.h"
#if HAVE_DLFCN_H
lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2
lt_status=$lt_dlunknown
cat > conftest.$ac_ext <<_LT_EOF
-#line 12988 "configure"
+#line 13028 "configure"
#include "confdefs.h"
#if HAVE_DLFCN_H
+2021-01-08 Mike Frysinger <vapier@gentoo.org>
+
+ * configure: Regenerate.
+
2021-01-04 Mike Frysinger <vapier@gentoo.org>
* wrapper.c: Include stdlib.h.
DEPDIR
am__leading_dot
PACKAGE
+C_DIALECT
RANLIB
AR
HDEFINES
fi
+# Require C11 or newer. Autoconf-2.70 provides ac_cv_prog_cc_c11 when using
+# AC_PROG_CC, but we're still using Autoconf-2.69, and the newest it understands
+# is C99. So handle it ourselves.
+:
+C_DIALECT=
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether C11 is supported by default" >&5
+$as_echo_n "checking whether C11 is supported by default... " >&6; }
+cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h. */
+
+#if !defined __STDC_VERSION__ || __STDC_VERSION__ < 201112L
+# error "C11 support not found"
+#endif
+
+_ACEOF
+if ac_fn_c_try_compile "$LINENO"; then :
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5
+$as_echo "yes" >&6; }
+else
+
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking for -std=c11 support" >&5
+$as_echo_n "checking for -std=c11 support... " >&6; }
+ ac_save_CC="$CC"
+ CC="$CC -std=c11"
+ cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h. */
+
+#if !defined __STDC_VERSION__ || __STDC_VERSION__ < 201112L
+# error "C11 support not found"
+#endif
+
+_ACEOF
+if ac_fn_c_try_compile "$LINENO"; then :
+
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5
+$as_echo "yes" >&6; }
+ CC="$ac_save_CC"
+ C_DIALECT="-std=c11"
+
+else
+ as_fn_error $? "C11 is required" "$LINENO" 5
+fi
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+fi
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+
+
# Some of the common include files depend on bfd.h, and bfd.h checks
# that config.h is included first by testing that the PACKAGE macro
# is defined.
esac
;;
-gnu*)
- version_type=linux
- need_lib_prefix=no
- need_version=no
- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}${major} ${libname}${shared_ext}'
- soname_spec='${libname}${release}${shared_ext}$major'
- shlibpath_var=LD_LIBRARY_PATH
- hardcode_into_libs=yes
- ;;
-
haiku*)
version_type=linux
need_lib_prefix=no
;;
# This must be Linux ELF.
-linux* | k*bsd*-gnu | kopensolaris*-gnu)
+linux* | k*bsd*-gnu | kopensolaris*-gnu | gnu*)
version_type=linux
need_lib_prefix=no
need_version=no
lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2
lt_status=$lt_dlunknown
cat > conftest.$ac_ext <<_LT_EOF
-#line 12882 "configure"
+#line 12922 "configure"
#include "confdefs.h"
#if HAVE_DLFCN_H
lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2
lt_status=$lt_dlunknown
cat > conftest.$ac_ext <<_LT_EOF
-#line 12988 "configure"
+#line 13028 "configure"
#include "confdefs.h"
#if HAVE_DLFCN_H
+2021-01-08 Mike Frysinger <vapier@gentoo.org>
+
+ * configure: Regenerate.
+
2021-01-04 Mike Frysinger <vapier@gentoo.org>
* configure: Regenerate.
DEPDIR
am__leading_dot
PACKAGE
+C_DIALECT
RANLIB
AR
HDEFINES
fi
+# Require C11 or newer. Autoconf-2.70 provides ac_cv_prog_cc_c11 when using
+# AC_PROG_CC, but we're still using Autoconf-2.69, and the newest it understands
+# is C99. So handle it ourselves.
+:
+C_DIALECT=
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether C11 is supported by default" >&5
+$as_echo_n "checking whether C11 is supported by default... " >&6; }
+cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h. */
+
+#if !defined __STDC_VERSION__ || __STDC_VERSION__ < 201112L
+# error "C11 support not found"
+#endif
+
+_ACEOF
+if ac_fn_c_try_compile "$LINENO"; then :
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5
+$as_echo "yes" >&6; }
+else
+
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking for -std=c11 support" >&5
+$as_echo_n "checking for -std=c11 support... " >&6; }
+ ac_save_CC="$CC"
+ CC="$CC -std=c11"
+ cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h. */
+
+#if !defined __STDC_VERSION__ || __STDC_VERSION__ < 201112L
+# error "C11 support not found"
+#endif
+
+_ACEOF
+if ac_fn_c_try_compile "$LINENO"; then :
+
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5
+$as_echo "yes" >&6; }
+ CC="$ac_save_CC"
+ C_DIALECT="-std=c11"
+
+else
+ as_fn_error $? "C11 is required" "$LINENO" 5
+fi
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+fi
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+
+
# Some of the common include files depend on bfd.h, and bfd.h checks
# that config.h is included first by testing that the PACKAGE macro
# is defined.
esac
;;
-gnu*)
- version_type=linux
- need_lib_prefix=no
- need_version=no
- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}${major} ${libname}${shared_ext}'
- soname_spec='${libname}${release}${shared_ext}$major'
- shlibpath_var=LD_LIBRARY_PATH
- hardcode_into_libs=yes
- ;;
-
haiku*)
version_type=linux
need_lib_prefix=no
;;
# This must be Linux ELF.
-linux* | k*bsd*-gnu | kopensolaris*-gnu)
+linux* | k*bsd*-gnu | kopensolaris*-gnu | gnu*)
version_type=linux
need_lib_prefix=no
need_version=no
lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2
lt_status=$lt_dlunknown
cat > conftest.$ac_ext <<_LT_EOF
-#line 12882 "configure"
+#line 12922 "configure"
#include "confdefs.h"
#if HAVE_DLFCN_H
lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2
lt_status=$lt_dlunknown
cat > conftest.$ac_ext <<_LT_EOF
-#line 12988 "configure"
+#line 13028 "configure"
#include "confdefs.h"
#if HAVE_DLFCN_H
+2021-01-08 Mike Frysinger <vapier@gentoo.org>
+
+ * configure: Regenerate.
+
2021-01-04 Mike Frysinger <vapier@gentoo.org>
* machs.c: Include stdlib.h.
DEPDIR
am__leading_dot
PACKAGE
+C_DIALECT
RANLIB
AR
HDEFINES
fi
+# Require C11 or newer. Autoconf-2.70 provides ac_cv_prog_cc_c11 when using
+# AC_PROG_CC, but we're still using Autoconf-2.69, and the newest it understands
+# is C99. So handle it ourselves.
+:
+C_DIALECT=
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether C11 is supported by default" >&5
+$as_echo_n "checking whether C11 is supported by default... " >&6; }
+cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h. */
+
+#if !defined __STDC_VERSION__ || __STDC_VERSION__ < 201112L
+# error "C11 support not found"
+#endif
+
+_ACEOF
+if ac_fn_c_try_compile "$LINENO"; then :
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5
+$as_echo "yes" >&6; }
+else
+
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking for -std=c11 support" >&5
+$as_echo_n "checking for -std=c11 support... " >&6; }
+ ac_save_CC="$CC"
+ CC="$CC -std=c11"
+ cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h. */
+
+#if !defined __STDC_VERSION__ || __STDC_VERSION__ < 201112L
+# error "C11 support not found"
+#endif
+
+_ACEOF
+if ac_fn_c_try_compile "$LINENO"; then :
+
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5
+$as_echo "yes" >&6; }
+ CC="$ac_save_CC"
+ C_DIALECT="-std=c11"
+
+else
+ as_fn_error $? "C11 is required" "$LINENO" 5
+fi
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+fi
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+
+
# Some of the common include files depend on bfd.h, and bfd.h checks
# that config.h is included first by testing that the PACKAGE macro
# is defined.
esac
;;
-gnu*)
- version_type=linux
- need_lib_prefix=no
- need_version=no
- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}${major} ${libname}${shared_ext}'
- soname_spec='${libname}${release}${shared_ext}$major'
- shlibpath_var=LD_LIBRARY_PATH
- hardcode_into_libs=yes
- ;;
-
haiku*)
version_type=linux
need_lib_prefix=no
;;
# This must be Linux ELF.
-linux* | k*bsd*-gnu | kopensolaris*-gnu)
+linux* | k*bsd*-gnu | kopensolaris*-gnu | gnu*)
version_type=linux
need_lib_prefix=no
need_version=no
lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2
lt_status=$lt_dlunknown
cat > conftest.$ac_ext <<_LT_EOF
-#line 12925 "configure"
+#line 12965 "configure"
#include "confdefs.h"
#if HAVE_DLFCN_H
lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2
lt_status=$lt_dlunknown
cat > conftest.$ac_ext <<_LT_EOF
-#line 13031 "configure"
+#line 13071 "configure"
#include "confdefs.h"
#if HAVE_DLFCN_H
+2021-01-08 Mike Frysinger <vapier@gentoo.org>
+
+ * configure: Regenerate.
+
2020-11-01 Simon Marchi <simon.marchi@polymtl.ca>
* configure: Re-generate.
DEPDIR
am__leading_dot
PACKAGE
+C_DIALECT
RANLIB
AR
HDEFINES
fi
+# Require C11 or newer. Autoconf-2.70 provides ac_cv_prog_cc_c11 when using
+# AC_PROG_CC, but we're still using Autoconf-2.69, and the newest it understands
+# is C99. So handle it ourselves.
+:
+C_DIALECT=
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether C11 is supported by default" >&5
+$as_echo_n "checking whether C11 is supported by default... " >&6; }
+cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h. */
+
+#if !defined __STDC_VERSION__ || __STDC_VERSION__ < 201112L
+# error "C11 support not found"
+#endif
+
+_ACEOF
+if ac_fn_c_try_compile "$LINENO"; then :
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5
+$as_echo "yes" >&6; }
+else
+
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking for -std=c11 support" >&5
+$as_echo_n "checking for -std=c11 support... " >&6; }
+ ac_save_CC="$CC"
+ CC="$CC -std=c11"
+ cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h. */
+
+#if !defined __STDC_VERSION__ || __STDC_VERSION__ < 201112L
+# error "C11 support not found"
+#endif
+
+_ACEOF
+if ac_fn_c_try_compile "$LINENO"; then :
+
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5
+$as_echo "yes" >&6; }
+ CC="$ac_save_CC"
+ C_DIALECT="-std=c11"
+
+else
+ as_fn_error $? "C11 is required" "$LINENO" 5
+fi
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+fi
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+
+
# Some of the common include files depend on bfd.h, and bfd.h checks
# that config.h is included first by testing that the PACKAGE macro
# is defined.
esac
;;
-gnu*)
- version_type=linux
- need_lib_prefix=no
- need_version=no
- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}${major} ${libname}${shared_ext}'
- soname_spec='${libname}${release}${shared_ext}$major'
- shlibpath_var=LD_LIBRARY_PATH
- hardcode_into_libs=yes
- ;;
-
haiku*)
version_type=linux
need_lib_prefix=no
;;
# This must be Linux ELF.
-linux* | k*bsd*-gnu | kopensolaris*-gnu)
+linux* | k*bsd*-gnu | kopensolaris*-gnu | gnu*)
version_type=linux
need_lib_prefix=no
need_version=no
lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2
lt_status=$lt_dlunknown
cat > conftest.$ac_ext <<_LT_EOF
-#line 12887 "configure"
+#line 12927 "configure"
#include "confdefs.h"
#if HAVE_DLFCN_H
lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2
lt_status=$lt_dlunknown
cat > conftest.$ac_ext <<_LT_EOF
-#line 12993 "configure"
+#line 13033 "configure"
#include "confdefs.h"
#if HAVE_DLFCN_H
+2021-01-08 Mike Frysinger <vapier@gentoo.org>
+
+ * Make-common.in (C_DIALECT): Define.
+ (COMPILE.pre): Append $(C_DIALECT).
+ * acinclude.m4 (SIM_AC_COMMON): Probe C11 to define C_DIALECT.
+
2021-01-07 Mike Frysinger <vapier@gentoo.org>
* sim-core.c (sim_memory_map): Define.
INSTALL_DATA = @INSTALL_DATA@
CC = @CC@
+C_DIALECT = @C_DIALECT@
CC_FOR_BUILD = @CC_FOR_BUILD@
CFLAGS = @CFLAGS@
CPPFLAGS = @CPPFLAGS@
# Note that these are overridden by GNU make-specific code below if
# GNU make is used. The overrides implement dependency tracking.
-COMPILE.pre = $(CC)
+COMPILE.pre = $(CC) $(C_DIALECT)
COMPILE.post = -c -o $@
COMPILE = $(COMPILE.pre) $(ALL_CFLAGS) $(COMPILE.post)
POSTCOMPILE = @true
AC_SUBST(AR)
AC_PROG_RANLIB
+# Require C11 or newer. Autoconf-2.70 provides ac_cv_prog_cc_c11 when using
+# AC_PROG_CC, but we're still using Autoconf-2.69, and the newest it understands
+# is C99. So handle it ourselves.
+m4_version_prereq([2.70], [AC_MSG_ERROR([clean this up!])], [:])
+C_DIALECT=
+AC_MSG_CHECKING([whether C11 is supported by default])
+AC_COMPILE_IFELSE([AC_LANG_SOURCE([
+#if !defined __STDC_VERSION__ || __STDC_VERSION__ < 201112L
+# error "C11 support not found"
+#endif
+])], [AC_MSG_RESULT([yes])], [
+ AC_MSG_RESULT([no])
+ AC_MSG_CHECKING([for -std=c11 support])
+ ac_save_CC="$CC"
+ CC="$CC -std=c11"
+ AC_COMPILE_IFELSE([AC_LANG_SOURCE([
+#if !defined __STDC_VERSION__ || __STDC_VERSION__ < 201112L
+# error "C11 support not found"
+#endif
+])], [
+ AC_MSG_RESULT([yes])
+ CC="$ac_save_CC"
+ C_DIALECT="-std=c11"
+], [AC_MSG_ERROR([C11 is required])])])
+AC_SUBST(C_DIALECT)
+
# Some of the common include files depend on bfd.h, and bfd.h checks
# that config.h is included first by testing that the PACKAGE macro
# is defined.
+2021-01-08 Mike Frysinger <vapier@gentoo.org>
+
+ * configure: Regenerate.
+
2021-01-04 Mike Frysinger <vapier@gentoo.org>
* configure: Regenerate.
DEPDIR
am__leading_dot
PACKAGE
+C_DIALECT
RANLIB
AR
HDEFINES
fi
+# Require C11 or newer. Autoconf-2.70 provides ac_cv_prog_cc_c11 when using
+# AC_PROG_CC, but we're still using Autoconf-2.69, and the newest it understands
+# is C99. So handle it ourselves.
+:
+C_DIALECT=
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether C11 is supported by default" >&5
+$as_echo_n "checking whether C11 is supported by default... " >&6; }
+cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h. */
+
+#if !defined __STDC_VERSION__ || __STDC_VERSION__ < 201112L
+# error "C11 support not found"
+#endif
+
+_ACEOF
+if ac_fn_c_try_compile "$LINENO"; then :
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5
+$as_echo "yes" >&6; }
+else
+
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking for -std=c11 support" >&5
+$as_echo_n "checking for -std=c11 support... " >&6; }
+ ac_save_CC="$CC"
+ CC="$CC -std=c11"
+ cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h. */
+
+#if !defined __STDC_VERSION__ || __STDC_VERSION__ < 201112L
+# error "C11 support not found"
+#endif
+
+_ACEOF
+if ac_fn_c_try_compile "$LINENO"; then :
+
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5
+$as_echo "yes" >&6; }
+ CC="$ac_save_CC"
+ C_DIALECT="-std=c11"
+
+else
+ as_fn_error $? "C11 is required" "$LINENO" 5
+fi
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+fi
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+
+
# Some of the common include files depend on bfd.h, and bfd.h checks
# that config.h is included first by testing that the PACKAGE macro
# is defined.
esac
;;
-gnu*)
- version_type=linux
- need_lib_prefix=no
- need_version=no
- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}${major} ${libname}${shared_ext}'
- soname_spec='${libname}${release}${shared_ext}$major'
- shlibpath_var=LD_LIBRARY_PATH
- hardcode_into_libs=yes
- ;;
-
haiku*)
version_type=linux
need_lib_prefix=no
;;
# This must be Linux ELF.
-linux* | k*bsd*-gnu | kopensolaris*-gnu)
+linux* | k*bsd*-gnu | kopensolaris*-gnu | gnu*)
version_type=linux
need_lib_prefix=no
need_version=no
lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2
lt_status=$lt_dlunknown
cat > conftest.$ac_ext <<_LT_EOF
-#line 12882 "configure"
+#line 12922 "configure"
#include "confdefs.h"
#if HAVE_DLFCN_H
lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2
lt_status=$lt_dlunknown
cat > conftest.$ac_ext <<_LT_EOF
-#line 12988 "configure"
+#line 13028 "configure"
#include "confdefs.h"
#if HAVE_DLFCN_H
+2021-01-08 Mike Frysinger <vapier@gentoo.org>
+
+ * configure: Regenerate.
+
2021-01-04 Mike Frysinger <vapier@gentoo.org>
* configure: Regenerate.
DEPDIR
am__leading_dot
PACKAGE
+C_DIALECT
RANLIB
AR
HDEFINES
fi
+# Require C11 or newer. Autoconf-2.70 provides ac_cv_prog_cc_c11 when using
+# AC_PROG_CC, but we're still using Autoconf-2.69, and the newest it understands
+# is C99. So handle it ourselves.
+:
+C_DIALECT=
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether C11 is supported by default" >&5
+$as_echo_n "checking whether C11 is supported by default... " >&6; }
+cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h. */
+
+#if !defined __STDC_VERSION__ || __STDC_VERSION__ < 201112L
+# error "C11 support not found"
+#endif
+
+_ACEOF
+if ac_fn_c_try_compile "$LINENO"; then :
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5
+$as_echo "yes" >&6; }
+else
+
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking for -std=c11 support" >&5
+$as_echo_n "checking for -std=c11 support... " >&6; }
+ ac_save_CC="$CC"
+ CC="$CC -std=c11"
+ cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h. */
+
+#if !defined __STDC_VERSION__ || __STDC_VERSION__ < 201112L
+# error "C11 support not found"
+#endif
+
+_ACEOF
+if ac_fn_c_try_compile "$LINENO"; then :
+
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5
+$as_echo "yes" >&6; }
+ CC="$ac_save_CC"
+ C_DIALECT="-std=c11"
+
+else
+ as_fn_error $? "C11 is required" "$LINENO" 5
+fi
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+fi
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+
+
# Some of the common include files depend on bfd.h, and bfd.h checks
# that config.h is included first by testing that the PACKAGE macro
# is defined.
esac
;;
-gnu*)
- version_type=linux
- need_lib_prefix=no
- need_version=no
- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}${major} ${libname}${shared_ext}'
- soname_spec='${libname}${release}${shared_ext}$major'
- shlibpath_var=LD_LIBRARY_PATH
- hardcode_into_libs=yes
- ;;
-
haiku*)
version_type=linux
need_lib_prefix=no
;;
# This must be Linux ELF.
-linux* | k*bsd*-gnu | kopensolaris*-gnu)
+linux* | k*bsd*-gnu | kopensolaris*-gnu | gnu*)
version_type=linux
need_lib_prefix=no
need_version=no
lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2
lt_status=$lt_dlunknown
cat > conftest.$ac_ext <<_LT_EOF
-#line 12896 "configure"
+#line 12936 "configure"
#include "confdefs.h"
#if HAVE_DLFCN_H
lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2
lt_status=$lt_dlunknown
cat > conftest.$ac_ext <<_LT_EOF
-#line 13002 "configure"
+#line 13042 "configure"
#include "confdefs.h"
#if HAVE_DLFCN_H
+2021-01-08 Mike Frysinger <vapier@gentoo.org>
+
+ * configure: Regenerate.
+
2021-01-04 Mike Frysinger <vapier@gentoo.org>
* configure: Regenerate.
DEPDIR
am__leading_dot
PACKAGE
+C_DIALECT
RANLIB
AR
HDEFINES
fi
+# Require C11 or newer. Autoconf-2.70 provides ac_cv_prog_cc_c11 when using
+# AC_PROG_CC, but we're still using Autoconf-2.69, and the newest it understands
+# is C99. So handle it ourselves.
+:
+C_DIALECT=
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether C11 is supported by default" >&5
+$as_echo_n "checking whether C11 is supported by default... " >&6; }
+cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h. */
+
+#if !defined __STDC_VERSION__ || __STDC_VERSION__ < 201112L
+# error "C11 support not found"
+#endif
+
+_ACEOF
+if ac_fn_c_try_compile "$LINENO"; then :
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5
+$as_echo "yes" >&6; }
+else
+
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking for -std=c11 support" >&5
+$as_echo_n "checking for -std=c11 support... " >&6; }
+ ac_save_CC="$CC"
+ CC="$CC -std=c11"
+ cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h. */
+
+#if !defined __STDC_VERSION__ || __STDC_VERSION__ < 201112L
+# error "C11 support not found"
+#endif
+
+_ACEOF
+if ac_fn_c_try_compile "$LINENO"; then :
+
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5
+$as_echo "yes" >&6; }
+ CC="$ac_save_CC"
+ C_DIALECT="-std=c11"
+
+else
+ as_fn_error $? "C11 is required" "$LINENO" 5
+fi
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+fi
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+
+
# Some of the common include files depend on bfd.h, and bfd.h checks
# that config.h is included first by testing that the PACKAGE macro
# is defined.
esac
;;
-gnu*)
- version_type=linux
- need_lib_prefix=no
- need_version=no
- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}${major} ${libname}${shared_ext}'
- soname_spec='${libname}${release}${shared_ext}$major'
- shlibpath_var=LD_LIBRARY_PATH
- hardcode_into_libs=yes
- ;;
-
haiku*)
version_type=linux
need_lib_prefix=no
;;
# This must be Linux ELF.
-linux* | k*bsd*-gnu | kopensolaris*-gnu)
+linux* | k*bsd*-gnu | kopensolaris*-gnu | gnu*)
version_type=linux
need_lib_prefix=no
need_version=no
lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2
lt_status=$lt_dlunknown
cat > conftest.$ac_ext <<_LT_EOF
-#line 12882 "configure"
+#line 12922 "configure"
#include "confdefs.h"
#if HAVE_DLFCN_H
lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2
lt_status=$lt_dlunknown
cat > conftest.$ac_ext <<_LT_EOF
-#line 12988 "configure"
+#line 13028 "configure"
#include "confdefs.h"
#if HAVE_DLFCN_H
+2021-01-08 Mike Frysinger <vapier@gentoo.org>
+
+ * configure: Regenerate.
+
2021-01-04 Mike Frysinger <vapier@gentoo.org>
* configure: Regenerate.
DEPDIR
am__leading_dot
PACKAGE
+C_DIALECT
RANLIB
AR
HDEFINES
fi
+# Require C11 or newer. Autoconf-2.70 provides ac_cv_prog_cc_c11 when using
+# AC_PROG_CC, but we're still using Autoconf-2.69, and the newest it understands
+# is C99. So handle it ourselves.
+:
+C_DIALECT=
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether C11 is supported by default" >&5
+$as_echo_n "checking whether C11 is supported by default... " >&6; }
+cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h. */
+
+#if !defined __STDC_VERSION__ || __STDC_VERSION__ < 201112L
+# error "C11 support not found"
+#endif
+
+_ACEOF
+if ac_fn_c_try_compile "$LINENO"; then :
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5
+$as_echo "yes" >&6; }
+else
+
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking for -std=c11 support" >&5
+$as_echo_n "checking for -std=c11 support... " >&6; }
+ ac_save_CC="$CC"
+ CC="$CC -std=c11"
+ cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h. */
+
+#if !defined __STDC_VERSION__ || __STDC_VERSION__ < 201112L
+# error "C11 support not found"
+#endif
+
+_ACEOF
+if ac_fn_c_try_compile "$LINENO"; then :
+
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5
+$as_echo "yes" >&6; }
+ CC="$ac_save_CC"
+ C_DIALECT="-std=c11"
+
+else
+ as_fn_error $? "C11 is required" "$LINENO" 5
+fi
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+fi
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+
+
# Some of the common include files depend on bfd.h, and bfd.h checks
# that config.h is included first by testing that the PACKAGE macro
# is defined.
esac
;;
-gnu*)
- version_type=linux
- need_lib_prefix=no
- need_version=no
- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}${major} ${libname}${shared_ext}'
- soname_spec='${libname}${release}${shared_ext}$major'
- shlibpath_var=LD_LIBRARY_PATH
- hardcode_into_libs=yes
- ;;
-
haiku*)
version_type=linux
need_lib_prefix=no
;;
# This must be Linux ELF.
-linux* | k*bsd*-gnu | kopensolaris*-gnu)
+linux* | k*bsd*-gnu | kopensolaris*-gnu | gnu*)
version_type=linux
need_lib_prefix=no
need_version=no
lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2
lt_status=$lt_dlunknown
cat > conftest.$ac_ext <<_LT_EOF
-#line 12869 "configure"
+#line 12909 "configure"
#include "confdefs.h"
#if HAVE_DLFCN_H
lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2
lt_status=$lt_dlunknown
cat > conftest.$ac_ext <<_LT_EOF
-#line 12975 "configure"
+#line 13015 "configure"
#include "confdefs.h"
#if HAVE_DLFCN_H
+2021-01-08 Mike Frysinger <vapier@gentoo.org>
+
+ * configure: Regenerate.
+
2021-01-04 Mike Frysinger <vapier@gentoo.org>
* configure: Regenerate.
DEPDIR
am__leading_dot
PACKAGE
+C_DIALECT
RANLIB
AR
HDEFINES
fi
+# Require C11 or newer. Autoconf-2.70 provides ac_cv_prog_cc_c11 when using
+# AC_PROG_CC, but we're still using Autoconf-2.69, and the newest it understands
+# is C99. So handle it ourselves.
+:
+C_DIALECT=
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether C11 is supported by default" >&5
+$as_echo_n "checking whether C11 is supported by default... " >&6; }
+cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h. */
+
+#if !defined __STDC_VERSION__ || __STDC_VERSION__ < 201112L
+# error "C11 support not found"
+#endif
+
+_ACEOF
+if ac_fn_c_try_compile "$LINENO"; then :
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5
+$as_echo "yes" >&6; }
+else
+
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking for -std=c11 support" >&5
+$as_echo_n "checking for -std=c11 support... " >&6; }
+ ac_save_CC="$CC"
+ CC="$CC -std=c11"
+ cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h. */
+
+#if !defined __STDC_VERSION__ || __STDC_VERSION__ < 201112L
+# error "C11 support not found"
+#endif
+
+_ACEOF
+if ac_fn_c_try_compile "$LINENO"; then :
+
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5
+$as_echo "yes" >&6; }
+ CC="$ac_save_CC"
+ C_DIALECT="-std=c11"
+
+else
+ as_fn_error $? "C11 is required" "$LINENO" 5
+fi
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+fi
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+
+
# Some of the common include files depend on bfd.h, and bfd.h checks
# that config.h is included first by testing that the PACKAGE macro
# is defined.
esac
;;
-gnu*)
- version_type=linux
- need_lib_prefix=no
- need_version=no
- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}${major} ${libname}${shared_ext}'
- soname_spec='${libname}${release}${shared_ext}$major'
- shlibpath_var=LD_LIBRARY_PATH
- hardcode_into_libs=yes
- ;;
-
haiku*)
version_type=linux
need_lib_prefix=no
;;
# This must be Linux ELF.
-linux* | k*bsd*-gnu | kopensolaris*-gnu)
+linux* | k*bsd*-gnu | kopensolaris*-gnu | gnu*)
version_type=linux
need_lib_prefix=no
need_version=no
lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2
lt_status=$lt_dlunknown
cat > conftest.$ac_ext <<_LT_EOF
-#line 12891 "configure"
+#line 12931 "configure"
#include "confdefs.h"
#if HAVE_DLFCN_H
lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2
lt_status=$lt_dlunknown
cat > conftest.$ac_ext <<_LT_EOF
-#line 12997 "configure"
+#line 13037 "configure"
#include "confdefs.h"
#if HAVE_DLFCN_H
+2021-01-08 Mike Frysinger <vapier@gentoo.org>
+
+ * configure: Regenerate.
+
2021-01-04 Mike Frysinger <vapier@gentoo.org>
* configure: Regenerate.
DEPDIR
am__leading_dot
PACKAGE
+C_DIALECT
RANLIB
AR
HDEFINES
fi
+# Require C11 or newer. Autoconf-2.70 provides ac_cv_prog_cc_c11 when using
+# AC_PROG_CC, but we're still using Autoconf-2.69, and the newest it understands
+# is C99. So handle it ourselves.
+:
+C_DIALECT=
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether C11 is supported by default" >&5
+$as_echo_n "checking whether C11 is supported by default... " >&6; }
+cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h. */
+
+#if !defined __STDC_VERSION__ || __STDC_VERSION__ < 201112L
+# error "C11 support not found"
+#endif
+
+_ACEOF
+if ac_fn_c_try_compile "$LINENO"; then :
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5
+$as_echo "yes" >&6; }
+else
+
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking for -std=c11 support" >&5
+$as_echo_n "checking for -std=c11 support... " >&6; }
+ ac_save_CC="$CC"
+ CC="$CC -std=c11"
+ cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h. */
+
+#if !defined __STDC_VERSION__ || __STDC_VERSION__ < 201112L
+# error "C11 support not found"
+#endif
+
+_ACEOF
+if ac_fn_c_try_compile "$LINENO"; then :
+
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5
+$as_echo "yes" >&6; }
+ CC="$ac_save_CC"
+ C_DIALECT="-std=c11"
+
+else
+ as_fn_error $? "C11 is required" "$LINENO" 5
+fi
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+fi
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+
+
# Some of the common include files depend on bfd.h, and bfd.h checks
# that config.h is included first by testing that the PACKAGE macro
# is defined.
esac
;;
-gnu*)
- version_type=linux
- need_lib_prefix=no
- need_version=no
- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}${major} ${libname}${shared_ext}'
- soname_spec='${libname}${release}${shared_ext}$major'
- shlibpath_var=LD_LIBRARY_PATH
- hardcode_into_libs=yes
- ;;
-
haiku*)
version_type=linux
need_lib_prefix=no
;;
# This must be Linux ELF.
-linux* | k*bsd*-gnu | kopensolaris*-gnu)
+linux* | k*bsd*-gnu | kopensolaris*-gnu | gnu*)
version_type=linux
need_lib_prefix=no
need_version=no
lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2
lt_status=$lt_dlunknown
cat > conftest.$ac_ext <<_LT_EOF
-#line 12882 "configure"
+#line 12922 "configure"
#include "confdefs.h"
#if HAVE_DLFCN_H
lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2
lt_status=$lt_dlunknown
cat > conftest.$ac_ext <<_LT_EOF
-#line 12988 "configure"
+#line 13028 "configure"
#include "confdefs.h"
#if HAVE_DLFCN_H
+2021-01-08 Mike Frysinger <vapier@gentoo.org>
+
+ * configure: Regenerate.
+
2021-01-07 Mike Frysinger <vapier@gentoo.org>
* compile.c (set_simcache_size, h8_get_cache_top, h8_set_cache_top,
DEPDIR
am__leading_dot
PACKAGE
+C_DIALECT
RANLIB
AR
HDEFINES
fi
+# Require C11 or newer. Autoconf-2.70 provides ac_cv_prog_cc_c11 when using
+# AC_PROG_CC, but we're still using Autoconf-2.69, and the newest it understands
+# is C99. So handle it ourselves.
+:
+C_DIALECT=
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether C11 is supported by default" >&5
+$as_echo_n "checking whether C11 is supported by default... " >&6; }
+cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h. */
+
+#if !defined __STDC_VERSION__ || __STDC_VERSION__ < 201112L
+# error "C11 support not found"
+#endif
+
+_ACEOF
+if ac_fn_c_try_compile "$LINENO"; then :
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5
+$as_echo "yes" >&6; }
+else
+
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking for -std=c11 support" >&5
+$as_echo_n "checking for -std=c11 support... " >&6; }
+ ac_save_CC="$CC"
+ CC="$CC -std=c11"
+ cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h. */
+
+#if !defined __STDC_VERSION__ || __STDC_VERSION__ < 201112L
+# error "C11 support not found"
+#endif
+
+_ACEOF
+if ac_fn_c_try_compile "$LINENO"; then :
+
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5
+$as_echo "yes" >&6; }
+ CC="$ac_save_CC"
+ C_DIALECT="-std=c11"
+
+else
+ as_fn_error $? "C11 is required" "$LINENO" 5
+fi
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+fi
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+
+
# Some of the common include files depend on bfd.h, and bfd.h checks
# that config.h is included first by testing that the PACKAGE macro
# is defined.
esac
;;
-gnu*)
- version_type=linux
- need_lib_prefix=no
- need_version=no
- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}${major} ${libname}${shared_ext}'
- soname_spec='${libname}${release}${shared_ext}$major'
- shlibpath_var=LD_LIBRARY_PATH
- hardcode_into_libs=yes
- ;;
-
haiku*)
version_type=linux
need_lib_prefix=no
;;
# This must be Linux ELF.
-linux* | k*bsd*-gnu | kopensolaris*-gnu)
+linux* | k*bsd*-gnu | kopensolaris*-gnu | gnu*)
version_type=linux
need_lib_prefix=no
need_version=no
lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2
lt_status=$lt_dlunknown
cat > conftest.$ac_ext <<_LT_EOF
-#line 12874 "configure"
+#line 12914 "configure"
#include "confdefs.h"
#if HAVE_DLFCN_H
lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2
lt_status=$lt_dlunknown
cat > conftest.$ac_ext <<_LT_EOF
-#line 12980 "configure"
+#line 13020 "configure"
#include "confdefs.h"
#if HAVE_DLFCN_H
+2021-01-08 Mike Frysinger <vapier@gentoo.org>
+
+ * configure: Regenerate.
+
2021-01-04 Mike Frysinger <vapier@gentoo.org>
* configure: Regenerate.
DEPDIR
am__leading_dot
PACKAGE
+C_DIALECT
RANLIB
AR
HDEFINES
fi
+# Require C11 or newer. Autoconf-2.70 provides ac_cv_prog_cc_c11 when using
+# AC_PROG_CC, but we're still using Autoconf-2.69, and the newest it understands
+# is C99. So handle it ourselves.
+:
+C_DIALECT=
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether C11 is supported by default" >&5
+$as_echo_n "checking whether C11 is supported by default... " >&6; }
+cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h. */
+
+#if !defined __STDC_VERSION__ || __STDC_VERSION__ < 201112L
+# error "C11 support not found"
+#endif
+
+_ACEOF
+if ac_fn_c_try_compile "$LINENO"; then :
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5
+$as_echo "yes" >&6; }
+else
+
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking for -std=c11 support" >&5
+$as_echo_n "checking for -std=c11 support... " >&6; }
+ ac_save_CC="$CC"
+ CC="$CC -std=c11"
+ cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h. */
+
+#if !defined __STDC_VERSION__ || __STDC_VERSION__ < 201112L
+# error "C11 support not found"
+#endif
+
+_ACEOF
+if ac_fn_c_try_compile "$LINENO"; then :
+
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5
+$as_echo "yes" >&6; }
+ CC="$ac_save_CC"
+ C_DIALECT="-std=c11"
+
+else
+ as_fn_error $? "C11 is required" "$LINENO" 5
+fi
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+fi
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+
+
# Some of the common include files depend on bfd.h, and bfd.h checks
# that config.h is included first by testing that the PACKAGE macro
# is defined.
esac
;;
-gnu*)
- version_type=linux
- need_lib_prefix=no
- need_version=no
- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}${major} ${libname}${shared_ext}'
- soname_spec='${libname}${release}${shared_ext}$major'
- shlibpath_var=LD_LIBRARY_PATH
- hardcode_into_libs=yes
- ;;
-
haiku*)
version_type=linux
need_lib_prefix=no
;;
# This must be Linux ELF.
-linux* | k*bsd*-gnu | kopensolaris*-gnu)
+linux* | k*bsd*-gnu | kopensolaris*-gnu | gnu*)
version_type=linux
need_lib_prefix=no
need_version=no
lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2
lt_status=$lt_dlunknown
cat > conftest.$ac_ext <<_LT_EOF
-#line 12888 "configure"
+#line 12928 "configure"
#include "confdefs.h"
#if HAVE_DLFCN_H
lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2
lt_status=$lt_dlunknown
cat > conftest.$ac_ext <<_LT_EOF
-#line 12994 "configure"
+#line 13034 "configure"
#include "confdefs.h"
#if HAVE_DLFCN_H
+2021-01-08 Mike Frysinger <vapier@gentoo.org>
+
+ * configure: Regenerate.
+
2021-01-04 Mike Frysinger <vapier@gentoo.org>
* configure: Regenerate.
DEPDIR
am__leading_dot
PACKAGE
+C_DIALECT
RANLIB
AR
HDEFINES
fi
+# Require C11 or newer. Autoconf-2.70 provides ac_cv_prog_cc_c11 when using
+# AC_PROG_CC, but we're still using Autoconf-2.69, and the newest it understands
+# is C99. So handle it ourselves.
+:
+C_DIALECT=
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether C11 is supported by default" >&5
+$as_echo_n "checking whether C11 is supported by default... " >&6; }
+cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h. */
+
+#if !defined __STDC_VERSION__ || __STDC_VERSION__ < 201112L
+# error "C11 support not found"
+#endif
+
+_ACEOF
+if ac_fn_c_try_compile "$LINENO"; then :
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5
+$as_echo "yes" >&6; }
+else
+
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking for -std=c11 support" >&5
+$as_echo_n "checking for -std=c11 support... " >&6; }
+ ac_save_CC="$CC"
+ CC="$CC -std=c11"
+ cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h. */
+
+#if !defined __STDC_VERSION__ || __STDC_VERSION__ < 201112L
+# error "C11 support not found"
+#endif
+
+_ACEOF
+if ac_fn_c_try_compile "$LINENO"; then :
+
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5
+$as_echo "yes" >&6; }
+ CC="$ac_save_CC"
+ C_DIALECT="-std=c11"
+
+else
+ as_fn_error $? "C11 is required" "$LINENO" 5
+fi
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+fi
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+
+
# Some of the common include files depend on bfd.h, and bfd.h checks
# that config.h is included first by testing that the PACKAGE macro
# is defined.
esac
;;
-gnu*)
- version_type=linux
- need_lib_prefix=no
- need_version=no
- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}${major} ${libname}${shared_ext}'
- soname_spec='${libname}${release}${shared_ext}$major'
- shlibpath_var=LD_LIBRARY_PATH
- hardcode_into_libs=yes
- ;;
-
haiku*)
version_type=linux
need_lib_prefix=no
;;
# This must be Linux ELF.
-linux* | k*bsd*-gnu | kopensolaris*-gnu)
+linux* | k*bsd*-gnu | kopensolaris*-gnu | gnu*)
version_type=linux
need_lib_prefix=no
need_version=no
lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2
lt_status=$lt_dlunknown
cat > conftest.$ac_ext <<_LT_EOF
-#line 12888 "configure"
+#line 12928 "configure"
#include "confdefs.h"
#if HAVE_DLFCN_H
lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2
lt_status=$lt_dlunknown
cat > conftest.$ac_ext <<_LT_EOF
-#line 12994 "configure"
+#line 13034 "configure"
#include "confdefs.h"
#if HAVE_DLFCN_H
+2021-01-08 Mike Frysinger <vapier@gentoo.org>
+
+ * configure: Regenerate.
+
2021-01-04 Mike Frysinger <vapier@gentoo.org>
* configure: Regenerate.
DEPDIR
am__leading_dot
PACKAGE
+C_DIALECT
RANLIB
AR
HDEFINES
fi
+# Require C11 or newer. Autoconf-2.70 provides ac_cv_prog_cc_c11 when using
+# AC_PROG_CC, but we're still using Autoconf-2.69, and the newest it understands
+# is C99. So handle it ourselves.
+:
+C_DIALECT=
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether C11 is supported by default" >&5
+$as_echo_n "checking whether C11 is supported by default... " >&6; }
+cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h. */
+
+#if !defined __STDC_VERSION__ || __STDC_VERSION__ < 201112L
+# error "C11 support not found"
+#endif
+
+_ACEOF
+if ac_fn_c_try_compile "$LINENO"; then :
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5
+$as_echo "yes" >&6; }
+else
+
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking for -std=c11 support" >&5
+$as_echo_n "checking for -std=c11 support... " >&6; }
+ ac_save_CC="$CC"
+ CC="$CC -std=c11"
+ cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h. */
+
+#if !defined __STDC_VERSION__ || __STDC_VERSION__ < 201112L
+# error "C11 support not found"
+#endif
+
+_ACEOF
+if ac_fn_c_try_compile "$LINENO"; then :
+
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5
+$as_echo "yes" >&6; }
+ CC="$ac_save_CC"
+ C_DIALECT="-std=c11"
+
+else
+ as_fn_error $? "C11 is required" "$LINENO" 5
+fi
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+fi
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+
+
# Some of the common include files depend on bfd.h, and bfd.h checks
# that config.h is included first by testing that the PACKAGE macro
# is defined.
esac
;;
-gnu*)
- version_type=linux
- need_lib_prefix=no
- need_version=no
- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}${major} ${libname}${shared_ext}'
- soname_spec='${libname}${release}${shared_ext}$major'
- shlibpath_var=LD_LIBRARY_PATH
- hardcode_into_libs=yes
- ;;
-
haiku*)
version_type=linux
need_lib_prefix=no
;;
# This must be Linux ELF.
-linux* | k*bsd*-gnu | kopensolaris*-gnu)
+linux* | k*bsd*-gnu | kopensolaris*-gnu | gnu*)
version_type=linux
need_lib_prefix=no
need_version=no
lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2
lt_status=$lt_dlunknown
cat > conftest.$ac_ext <<_LT_EOF
-#line 12875 "configure"
+#line 12915 "configure"
#include "confdefs.h"
#if HAVE_DLFCN_H
lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2
lt_status=$lt_dlunknown
cat > conftest.$ac_ext <<_LT_EOF
-#line 12981 "configure"
+#line 13021 "configure"
#include "confdefs.h"
#if HAVE_DLFCN_H
+2021-01-08 Mike Frysinger <vapier@gentoo.org>
+
+ * configure: Regenerate.
+
2021-01-04 Mike Frysinger <vapier@gentoo.org>
* configure: Regenerate.
DEPDIR
am__leading_dot
PACKAGE
+C_DIALECT
RANLIB
AR
HDEFINES
fi
+# Require C11 or newer. Autoconf-2.70 provides ac_cv_prog_cc_c11 when using
+# AC_PROG_CC, but we're still using Autoconf-2.69, and the newest it understands
+# is C99. So handle it ourselves.
+:
+C_DIALECT=
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether C11 is supported by default" >&5
+$as_echo_n "checking whether C11 is supported by default... " >&6; }
+cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h. */
+
+#if !defined __STDC_VERSION__ || __STDC_VERSION__ < 201112L
+# error "C11 support not found"
+#endif
+
+_ACEOF
+if ac_fn_c_try_compile "$LINENO"; then :
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5
+$as_echo "yes" >&6; }
+else
+
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking for -std=c11 support" >&5
+$as_echo_n "checking for -std=c11 support... " >&6; }
+ ac_save_CC="$CC"
+ CC="$CC -std=c11"
+ cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h. */
+
+#if !defined __STDC_VERSION__ || __STDC_VERSION__ < 201112L
+# error "C11 support not found"
+#endif
+
+_ACEOF
+if ac_fn_c_try_compile "$LINENO"; then :
+
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5
+$as_echo "yes" >&6; }
+ CC="$ac_save_CC"
+ C_DIALECT="-std=c11"
+
+else
+ as_fn_error $? "C11 is required" "$LINENO" 5
+fi
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+fi
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+
+
# Some of the common include files depend on bfd.h, and bfd.h checks
# that config.h is included first by testing that the PACKAGE macro
# is defined.
esac
;;
-gnu*)
- version_type=linux
- need_lib_prefix=no
- need_version=no
- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}${major} ${libname}${shared_ext}'
- soname_spec='${libname}${release}${shared_ext}$major'
- shlibpath_var=LD_LIBRARY_PATH
- hardcode_into_libs=yes
- ;;
-
haiku*)
version_type=linux
need_lib_prefix=no
;;
# This must be Linux ELF.
-linux* | k*bsd*-gnu | kopensolaris*-gnu)
+linux* | k*bsd*-gnu | kopensolaris*-gnu | gnu*)
version_type=linux
need_lib_prefix=no
need_version=no
lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2
lt_status=$lt_dlunknown
cat > conftest.$ac_ext <<_LT_EOF
-#line 12890 "configure"
+#line 12930 "configure"
#include "confdefs.h"
#if HAVE_DLFCN_H
lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2
lt_status=$lt_dlunknown
cat > conftest.$ac_ext <<_LT_EOF
-#line 12996 "configure"
+#line 13036 "configure"
#include "confdefs.h"
#if HAVE_DLFCN_H
+2021-01-08 Mike Frysinger <vapier@gentoo.org>
+
+ * configure: Regenerate.
+
2021-01-04 Mike Frysinger <vapier@gentoo.org>
* configure: Regenerate.
DEPDIR
am__leading_dot
PACKAGE
+C_DIALECT
RANLIB
AR
HDEFINES
fi
+# Require C11 or newer. Autoconf-2.70 provides ac_cv_prog_cc_c11 when using
+# AC_PROG_CC, but we're still using Autoconf-2.69, and the newest it understands
+# is C99. So handle it ourselves.
+:
+C_DIALECT=
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether C11 is supported by default" >&5
+$as_echo_n "checking whether C11 is supported by default... " >&6; }
+cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h. */
+
+#if !defined __STDC_VERSION__ || __STDC_VERSION__ < 201112L
+# error "C11 support not found"
+#endif
+
+_ACEOF
+if ac_fn_c_try_compile "$LINENO"; then :
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5
+$as_echo "yes" >&6; }
+else
+
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking for -std=c11 support" >&5
+$as_echo_n "checking for -std=c11 support... " >&6; }
+ ac_save_CC="$CC"
+ CC="$CC -std=c11"
+ cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h. */
+
+#if !defined __STDC_VERSION__ || __STDC_VERSION__ < 201112L
+# error "C11 support not found"
+#endif
+
+_ACEOF
+if ac_fn_c_try_compile "$LINENO"; then :
+
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5
+$as_echo "yes" >&6; }
+ CC="$ac_save_CC"
+ C_DIALECT="-std=c11"
+
+else
+ as_fn_error $? "C11 is required" "$LINENO" 5
+fi
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+fi
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+
+
# Some of the common include files depend on bfd.h, and bfd.h checks
# that config.h is included first by testing that the PACKAGE macro
# is defined.
esac
;;
-gnu*)
- version_type=linux
- need_lib_prefix=no
- need_version=no
- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}${major} ${libname}${shared_ext}'
- soname_spec='${libname}${release}${shared_ext}$major'
- shlibpath_var=LD_LIBRARY_PATH
- hardcode_into_libs=yes
- ;;
-
haiku*)
version_type=linux
need_lib_prefix=no
;;
# This must be Linux ELF.
-linux* | k*bsd*-gnu | kopensolaris*-gnu)
+linux* | k*bsd*-gnu | kopensolaris*-gnu | gnu*)
version_type=linux
need_lib_prefix=no
need_version=no
lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2
lt_status=$lt_dlunknown
cat > conftest.$ac_ext <<_LT_EOF
-#line 12885 "configure"
+#line 12925 "configure"
#include "confdefs.h"
#if HAVE_DLFCN_H
lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2
lt_status=$lt_dlunknown
cat > conftest.$ac_ext <<_LT_EOF
-#line 12991 "configure"
+#line 13031 "configure"
#include "confdefs.h"
#if HAVE_DLFCN_H
+2021-01-08 Mike Frysinger <vapier@gentoo.org>
+
+ * configure: Regenerate.
+
2021-01-04 Mike Frysinger <vapier@gentoo.org>
* configure: Regenerate.
DEPDIR
am__leading_dot
PACKAGE
+C_DIALECT
RANLIB
AR
HDEFINES
fi
+# Require C11 or newer. Autoconf-2.70 provides ac_cv_prog_cc_c11 when using
+# AC_PROG_CC, but we're still using Autoconf-2.69, and the newest it understands
+# is C99. So handle it ourselves.
+:
+C_DIALECT=
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether C11 is supported by default" >&5
+$as_echo_n "checking whether C11 is supported by default... " >&6; }
+cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h. */
+
+#if !defined __STDC_VERSION__ || __STDC_VERSION__ < 201112L
+# error "C11 support not found"
+#endif
+
+_ACEOF
+if ac_fn_c_try_compile "$LINENO"; then :
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5
+$as_echo "yes" >&6; }
+else
+
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking for -std=c11 support" >&5
+$as_echo_n "checking for -std=c11 support... " >&6; }
+ ac_save_CC="$CC"
+ CC="$CC -std=c11"
+ cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h. */
+
+#if !defined __STDC_VERSION__ || __STDC_VERSION__ < 201112L
+# error "C11 support not found"
+#endif
+
+_ACEOF
+if ac_fn_c_try_compile "$LINENO"; then :
+
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5
+$as_echo "yes" >&6; }
+ CC="$ac_save_CC"
+ C_DIALECT="-std=c11"
+
+else
+ as_fn_error $? "C11 is required" "$LINENO" 5
+fi
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+fi
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+
+
# Some of the common include files depend on bfd.h, and bfd.h checks
# that config.h is included first by testing that the PACKAGE macro
# is defined.
esac
;;
-gnu*)
- version_type=linux
- need_lib_prefix=no
- need_version=no
- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}${major} ${libname}${shared_ext}'
- soname_spec='${libname}${release}${shared_ext}$major'
- shlibpath_var=LD_LIBRARY_PATH
- hardcode_into_libs=yes
- ;;
-
haiku*)
version_type=linux
need_lib_prefix=no
;;
# This must be Linux ELF.
-linux* | k*bsd*-gnu | kopensolaris*-gnu)
+linux* | k*bsd*-gnu | kopensolaris*-gnu | gnu*)
version_type=linux
need_lib_prefix=no
need_version=no
lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2
lt_status=$lt_dlunknown
cat > conftest.$ac_ext <<_LT_EOF
-#line 12882 "configure"
+#line 12922 "configure"
#include "confdefs.h"
#if HAVE_DLFCN_H
lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2
lt_status=$lt_dlunknown
cat > conftest.$ac_ext <<_LT_EOF
-#line 12988 "configure"
+#line 13028 "configure"
#include "confdefs.h"
#if HAVE_DLFCN_H
+2021-01-08 Mike Frysinger <vapier@gentoo.org>
+
+ * configure: Regenerate.
+
2021-01-04 Mike Frysinger <vapier@gentoo.org>
* configure: Regenerate.
DEPDIR
am__leading_dot
PACKAGE
+C_DIALECT
RANLIB
AR
HDEFINES
fi
+# Require C11 or newer. Autoconf-2.70 provides ac_cv_prog_cc_c11 when using
+# AC_PROG_CC, but we're still using Autoconf-2.69, and the newest it understands
+# is C99. So handle it ourselves.
+:
+C_DIALECT=
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether C11 is supported by default" >&5
+$as_echo_n "checking whether C11 is supported by default... " >&6; }
+cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h. */
+
+#if !defined __STDC_VERSION__ || __STDC_VERSION__ < 201112L
+# error "C11 support not found"
+#endif
+
+_ACEOF
+if ac_fn_c_try_compile "$LINENO"; then :
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5
+$as_echo "yes" >&6; }
+else
+
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking for -std=c11 support" >&5
+$as_echo_n "checking for -std=c11 support... " >&6; }
+ ac_save_CC="$CC"
+ CC="$CC -std=c11"
+ cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h. */
+
+#if !defined __STDC_VERSION__ || __STDC_VERSION__ < 201112L
+# error "C11 support not found"
+#endif
+
+_ACEOF
+if ac_fn_c_try_compile "$LINENO"; then :
+
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5
+$as_echo "yes" >&6; }
+ CC="$ac_save_CC"
+ C_DIALECT="-std=c11"
+
+else
+ as_fn_error $? "C11 is required" "$LINENO" 5
+fi
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+fi
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+
+
# Some of the common include files depend on bfd.h, and bfd.h checks
# that config.h is included first by testing that the PACKAGE macro
# is defined.
esac
;;
-gnu*)
- version_type=linux
- need_lib_prefix=no
- need_version=no
- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}${major} ${libname}${shared_ext}'
- soname_spec='${libname}${release}${shared_ext}$major'
- shlibpath_var=LD_LIBRARY_PATH
- hardcode_into_libs=yes
- ;;
-
haiku*)
version_type=linux
need_lib_prefix=no
;;
# This must be Linux ELF.
-linux* | k*bsd*-gnu | kopensolaris*-gnu)
+linux* | k*bsd*-gnu | kopensolaris*-gnu | gnu*)
version_type=linux
need_lib_prefix=no
need_version=no
lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2
lt_status=$lt_dlunknown
cat > conftest.$ac_ext <<_LT_EOF
-#line 12882 "configure"
+#line 12922 "configure"
#include "confdefs.h"
#if HAVE_DLFCN_H
lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2
lt_status=$lt_dlunknown
cat > conftest.$ac_ext <<_LT_EOF
-#line 12988 "configure"
+#line 13028 "configure"
#include "confdefs.h"
#if HAVE_DLFCN_H
+2021-01-08 Mike Frysinger <vapier@gentoo.org>
+
+ * configure: Regenerate.
+
2021-01-04 Mike Frysinger <vapier@gentoo.org>
* configure: Regenerate.
DEPDIR
am__leading_dot
PACKAGE
+C_DIALECT
RANLIB
AR
HDEFINES
fi
+# Require C11 or newer. Autoconf-2.70 provides ac_cv_prog_cc_c11 when using
+# AC_PROG_CC, but we're still using Autoconf-2.69, and the newest it understands
+# is C99. So handle it ourselves.
+:
+C_DIALECT=
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether C11 is supported by default" >&5
+$as_echo_n "checking whether C11 is supported by default... " >&6; }
+cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h. */
+
+#if !defined __STDC_VERSION__ || __STDC_VERSION__ < 201112L
+# error "C11 support not found"
+#endif
+
+_ACEOF
+if ac_fn_c_try_compile "$LINENO"; then :
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5
+$as_echo "yes" >&6; }
+else
+
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking for -std=c11 support" >&5
+$as_echo_n "checking for -std=c11 support... " >&6; }
+ ac_save_CC="$CC"
+ CC="$CC -std=c11"
+ cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h. */
+
+#if !defined __STDC_VERSION__ || __STDC_VERSION__ < 201112L
+# error "C11 support not found"
+#endif
+
+_ACEOF
+if ac_fn_c_try_compile "$LINENO"; then :
+
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5
+$as_echo "yes" >&6; }
+ CC="$ac_save_CC"
+ C_DIALECT="-std=c11"
+
+else
+ as_fn_error $? "C11 is required" "$LINENO" 5
+fi
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+fi
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+
+
# Some of the common include files depend on bfd.h, and bfd.h checks
# that config.h is included first by testing that the PACKAGE macro
# is defined.
esac
;;
-gnu*)
- version_type=linux
- need_lib_prefix=no
- need_version=no
- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}${major} ${libname}${shared_ext}'
- soname_spec='${libname}${release}${shared_ext}$major'
- shlibpath_var=LD_LIBRARY_PATH
- hardcode_into_libs=yes
- ;;
-
haiku*)
version_type=linux
need_lib_prefix=no
;;
# This must be Linux ELF.
-linux* | k*bsd*-gnu | kopensolaris*-gnu)
+linux* | k*bsd*-gnu | kopensolaris*-gnu | gnu*)
version_type=linux
need_lib_prefix=no
need_version=no
lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2
lt_status=$lt_dlunknown
cat > conftest.$ac_ext <<_LT_EOF
-#line 12915 "configure"
+#line 12955 "configure"
#include "confdefs.h"
#if HAVE_DLFCN_H
lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2
lt_status=$lt_dlunknown
cat > conftest.$ac_ext <<_LT_EOF
-#line 13021 "configure"
+#line 13061 "configure"
#include "confdefs.h"
#if HAVE_DLFCN_H
cat << __EOF__ > multi-run.c
/* Main entry point for MULTI simulators.
- Copyright (C) 2003-2020 Free Software Foundation, Inc.
+ Copyright (C) 2003-2021 Free Software Foundation, Inc.
This program is free software; you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
+2021-01-08 Mike Frysinger <vapier@gentoo.org>
+
+ * configure: Regenerate.
+
2021-01-04 Mike Frysinger <vapier@gentoo.org>
* configure: Regenerate.
DEPDIR
am__leading_dot
PACKAGE
+C_DIALECT
RANLIB
AR
HDEFINES
fi
+# Require C11 or newer. Autoconf-2.70 provides ac_cv_prog_cc_c11 when using
+# AC_PROG_CC, but we're still using Autoconf-2.69, and the newest it understands
+# is C99. So handle it ourselves.
+:
+C_DIALECT=
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether C11 is supported by default" >&5
+$as_echo_n "checking whether C11 is supported by default... " >&6; }
+cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h. */
+
+#if !defined __STDC_VERSION__ || __STDC_VERSION__ < 201112L
+# error "C11 support not found"
+#endif
+
+_ACEOF
+if ac_fn_c_try_compile "$LINENO"; then :
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5
+$as_echo "yes" >&6; }
+else
+
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking for -std=c11 support" >&5
+$as_echo_n "checking for -std=c11 support... " >&6; }
+ ac_save_CC="$CC"
+ CC="$CC -std=c11"
+ cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h. */
+
+#if !defined __STDC_VERSION__ || __STDC_VERSION__ < 201112L
+# error "C11 support not found"
+#endif
+
+_ACEOF
+if ac_fn_c_try_compile "$LINENO"; then :
+
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5
+$as_echo "yes" >&6; }
+ CC="$ac_save_CC"
+ C_DIALECT="-std=c11"
+
+else
+ as_fn_error $? "C11 is required" "$LINENO" 5
+fi
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+fi
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+
+
# Some of the common include files depend on bfd.h, and bfd.h checks
# that config.h is included first by testing that the PACKAGE macro
# is defined.
esac
;;
-gnu*)
- version_type=linux
- need_lib_prefix=no
- need_version=no
- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}${major} ${libname}${shared_ext}'
- soname_spec='${libname}${release}${shared_ext}$major'
- shlibpath_var=LD_LIBRARY_PATH
- hardcode_into_libs=yes
- ;;
-
haiku*)
version_type=linux
need_lib_prefix=no
;;
# This must be Linux ELF.
-linux* | k*bsd*-gnu | kopensolaris*-gnu)
+linux* | k*bsd*-gnu | kopensolaris*-gnu | gnu*)
version_type=linux
need_lib_prefix=no
need_version=no
lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2
lt_status=$lt_dlunknown
cat > conftest.$ac_ext <<_LT_EOF
-#line 12891 "configure"
+#line 12931 "configure"
#include "confdefs.h"
#if HAVE_DLFCN_H
lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2
lt_status=$lt_dlunknown
cat > conftest.$ac_ext <<_LT_EOF
-#line 12997 "configure"
+#line 13037 "configure"
#include "confdefs.h"
#if HAVE_DLFCN_H
+2021-01-08 Mike Frysinger <vapier@gentoo.org>
+
+ * configure: Regenerate.
+
2021-01-04 Mike Frysinger <vapier@gentoo.org>
* configure: Regenerate.
DEPDIR
am__leading_dot
PACKAGE
+C_DIALECT
RANLIB
AR
HDEFINES
fi
+# Require C11 or newer. Autoconf-2.70 provides ac_cv_prog_cc_c11 when using
+# AC_PROG_CC, but we're still using Autoconf-2.69, and the newest it understands
+# is C99. So handle it ourselves.
+:
+C_DIALECT=
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether C11 is supported by default" >&5
+$as_echo_n "checking whether C11 is supported by default... " >&6; }
+cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h. */
+
+#if !defined __STDC_VERSION__ || __STDC_VERSION__ < 201112L
+# error "C11 support not found"
+#endif
+
+_ACEOF
+if ac_fn_c_try_compile "$LINENO"; then :
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5
+$as_echo "yes" >&6; }
+else
+
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking for -std=c11 support" >&5
+$as_echo_n "checking for -std=c11 support... " >&6; }
+ ac_save_CC="$CC"
+ CC="$CC -std=c11"
+ cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h. */
+
+#if !defined __STDC_VERSION__ || __STDC_VERSION__ < 201112L
+# error "C11 support not found"
+#endif
+
+_ACEOF
+if ac_fn_c_try_compile "$LINENO"; then :
+
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5
+$as_echo "yes" >&6; }
+ CC="$ac_save_CC"
+ C_DIALECT="-std=c11"
+
+else
+ as_fn_error $? "C11 is required" "$LINENO" 5
+fi
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+fi
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+
+
# Some of the common include files depend on bfd.h, and bfd.h checks
# that config.h is included first by testing that the PACKAGE macro
# is defined.
esac
;;
-gnu*)
- version_type=linux
- need_lib_prefix=no
- need_version=no
- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}${major} ${libname}${shared_ext}'
- soname_spec='${libname}${release}${shared_ext}$major'
- shlibpath_var=LD_LIBRARY_PATH
- hardcode_into_libs=yes
- ;;
-
haiku*)
version_type=linux
need_lib_prefix=no
;;
# This must be Linux ELF.
-linux* | k*bsd*-gnu | kopensolaris*-gnu)
+linux* | k*bsd*-gnu | kopensolaris*-gnu | gnu*)
version_type=linux
need_lib_prefix=no
need_version=no
lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2
lt_status=$lt_dlunknown
cat > conftest.$ac_ext <<_LT_EOF
-#line 12883 "configure"
+#line 12923 "configure"
#include "confdefs.h"
#if HAVE_DLFCN_H
lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2
lt_status=$lt_dlunknown
cat > conftest.$ac_ext <<_LT_EOF
-#line 12989 "configure"
+#line 13029 "configure"
#include "confdefs.h"
#if HAVE_DLFCN_H
+2021-01-08 Mike Frysinger <vapier@gentoo.org>
+
+ * configure: Regenerate.
+
2021-01-04 Mike Frysinger <vapier@gentoo.org>
* configure: Regenerate.
DEPDIR
am__leading_dot
PACKAGE
+C_DIALECT
RANLIB
AR
HDEFINES
fi
+# Require C11 or newer. Autoconf-2.70 provides ac_cv_prog_cc_c11 when using
+# AC_PROG_CC, but we're still using Autoconf-2.69, and the newest it understands
+# is C99. So handle it ourselves.
+:
+C_DIALECT=
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether C11 is supported by default" >&5
+$as_echo_n "checking whether C11 is supported by default... " >&6; }
+cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h. */
+
+#if !defined __STDC_VERSION__ || __STDC_VERSION__ < 201112L
+# error "C11 support not found"
+#endif
+
+_ACEOF
+if ac_fn_c_try_compile "$LINENO"; then :
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5
+$as_echo "yes" >&6; }
+else
+
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking for -std=c11 support" >&5
+$as_echo_n "checking for -std=c11 support... " >&6; }
+ ac_save_CC="$CC"
+ CC="$CC -std=c11"
+ cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h. */
+
+#if !defined __STDC_VERSION__ || __STDC_VERSION__ < 201112L
+# error "C11 support not found"
+#endif
+
+_ACEOF
+if ac_fn_c_try_compile "$LINENO"; then :
+
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5
+$as_echo "yes" >&6; }
+ CC="$ac_save_CC"
+ C_DIALECT="-std=c11"
+
+else
+ as_fn_error $? "C11 is required" "$LINENO" 5
+fi
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+fi
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+
+
# Some of the common include files depend on bfd.h, and bfd.h checks
# that config.h is included first by testing that the PACKAGE macro
# is defined.
esac
;;
-gnu*)
- version_type=linux
- need_lib_prefix=no
- need_version=no
- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}${major} ${libname}${shared_ext}'
- soname_spec='${libname}${release}${shared_ext}$major'
- shlibpath_var=LD_LIBRARY_PATH
- hardcode_into_libs=yes
- ;;
-
haiku*)
version_type=linux
need_lib_prefix=no
;;
# This must be Linux ELF.
-linux* | k*bsd*-gnu | kopensolaris*-gnu)
+linux* | k*bsd*-gnu | kopensolaris*-gnu | gnu*)
version_type=linux
need_lib_prefix=no
need_version=no
lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2
lt_status=$lt_dlunknown
cat > conftest.$ac_ext <<_LT_EOF
-#line 12882 "configure"
+#line 12922 "configure"
#include "confdefs.h"
#if HAVE_DLFCN_H
lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2
lt_status=$lt_dlunknown
cat > conftest.$ac_ext <<_LT_EOF
-#line 12988 "configure"
+#line 13028 "configure"
#include "confdefs.h"
#if HAVE_DLFCN_H
+2021-01-08 Mike Frysinger <vapier@gentoo.org>
+
+ * configure: Regenerate.
+
2019-06-13 Stafford Horne <shorne@gmail.com>
* cpu.c: Regenerate.
DEPDIR
am__leading_dot
PACKAGE
+C_DIALECT
RANLIB
AR
HDEFINES
fi
+# Require C11 or newer. Autoconf-2.70 provides ac_cv_prog_cc_c11 when using
+# AC_PROG_CC, but we're still using Autoconf-2.69, and the newest it understands
+# is C99. So handle it ourselves.
+:
+C_DIALECT=
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether C11 is supported by default" >&5
+$as_echo_n "checking whether C11 is supported by default... " >&6; }
+cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h. */
+
+#if !defined __STDC_VERSION__ || __STDC_VERSION__ < 201112L
+# error "C11 support not found"
+#endif
+
+_ACEOF
+if ac_fn_c_try_compile "$LINENO"; then :
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5
+$as_echo "yes" >&6; }
+else
+
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking for -std=c11 support" >&5
+$as_echo_n "checking for -std=c11 support... " >&6; }
+ ac_save_CC="$CC"
+ CC="$CC -std=c11"
+ cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h. */
+
+#if !defined __STDC_VERSION__ || __STDC_VERSION__ < 201112L
+# error "C11 support not found"
+#endif
+
+_ACEOF
+if ac_fn_c_try_compile "$LINENO"; then :
+
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5
+$as_echo "yes" >&6; }
+ CC="$ac_save_CC"
+ C_DIALECT="-std=c11"
+
+else
+ as_fn_error $? "C11 is required" "$LINENO" 5
+fi
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+fi
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+
+
# Some of the common include files depend on bfd.h, and bfd.h checks
# that config.h is included first by testing that the PACKAGE macro
# is defined.
esac
;;
-gnu*)
- version_type=linux
- need_lib_prefix=no
- need_version=no
- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}${major} ${libname}${shared_ext}'
- soname_spec='${libname}${release}${shared_ext}$major'
- shlibpath_var=LD_LIBRARY_PATH
- hardcode_into_libs=yes
- ;;
-
haiku*)
version_type=linux
need_lib_prefix=no
;;
# This must be Linux ELF.
-linux* | k*bsd*-gnu | kopensolaris*-gnu)
+linux* | k*bsd*-gnu | kopensolaris*-gnu | gnu*)
version_type=linux
need_lib_prefix=no
need_version=no
lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2
lt_status=$lt_dlunknown
cat > conftest.$ac_ext <<_LT_EOF
-#line 12887 "configure"
+#line 12927 "configure"
#include "confdefs.h"
#if HAVE_DLFCN_H
lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2
lt_status=$lt_dlunknown
cat > conftest.$ac_ext <<_LT_EOF
-#line 12993 "configure"
+#line 13033 "configure"
#include "confdefs.h"
#if HAVE_DLFCN_H
+2021-01-08 Mike Frysinger <vapier@gentoo.org>
+
+ * configure: Regenerate.
+
2021-01-04 Mike Frysinger <vapier@gentoo.org>
* configure: Regenerate.
DEPDIR
am__leading_dot
PACKAGE
+C_DIALECT
RANLIB
AR
HDEFINES
fi
+# Require C11 or newer. Autoconf-2.70 provides ac_cv_prog_cc_c11 when using
+# AC_PROG_CC, but we're still using Autoconf-2.69, and the newest it understands
+# is C99. So handle it ourselves.
+:
+C_DIALECT=
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether C11 is supported by default" >&5
+$as_echo_n "checking whether C11 is supported by default... " >&6; }
+cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h. */
+
+#if !defined __STDC_VERSION__ || __STDC_VERSION__ < 201112L
+# error "C11 support not found"
+#endif
+
+_ACEOF
+if ac_fn_c_try_compile "$LINENO"; then :
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5
+$as_echo "yes" >&6; }
+else
+
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking for -std=c11 support" >&5
+$as_echo_n "checking for -std=c11 support... " >&6; }
+ ac_save_CC="$CC"
+ CC="$CC -std=c11"
+ cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h. */
+
+#if !defined __STDC_VERSION__ || __STDC_VERSION__ < 201112L
+# error "C11 support not found"
+#endif
+
+_ACEOF
+if ac_fn_c_try_compile "$LINENO"; then :
+
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5
+$as_echo "yes" >&6; }
+ CC="$ac_save_CC"
+ C_DIALECT="-std=c11"
+
+else
+ as_fn_error $? "C11 is required" "$LINENO" 5
+fi
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+fi
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+
+
# Some of the common include files depend on bfd.h, and bfd.h checks
# that config.h is included first by testing that the PACKAGE macro
# is defined.
esac
;;
-gnu*)
- version_type=linux
- need_lib_prefix=no
- need_version=no
- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}${major} ${libname}${shared_ext}'
- soname_spec='${libname}${release}${shared_ext}$major'
- shlibpath_var=LD_LIBRARY_PATH
- hardcode_into_libs=yes
- ;;
-
haiku*)
version_type=linux
need_lib_prefix=no
;;
# This must be Linux ELF.
-linux* | k*bsd*-gnu | kopensolaris*-gnu)
+linux* | k*bsd*-gnu | kopensolaris*-gnu | gnu*)
version_type=linux
need_lib_prefix=no
need_version=no
lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2
lt_status=$lt_dlunknown
cat > conftest.$ac_ext <<_LT_EOF
-#line 12882 "configure"
+#line 12922 "configure"
#include "confdefs.h"
#if HAVE_DLFCN_H
lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2
lt_status=$lt_dlunknown
cat > conftest.$ac_ext <<_LT_EOF
-#line 12988 "configure"
+#line 13028 "configure"
#include "confdefs.h"
#if HAVE_DLFCN_H
+2021-01-08 Mike Frysinger <vapier@gentoo.org>
+
+ * configure: Regenerate.
+
2021-01-04 Mike Frysinger <vapier@gentoo.org>
* configure: Regenerate.
DEPDIR
am__leading_dot
PACKAGE
+C_DIALECT
RANLIB
AR
HDEFINES
fi
+# Require C11 or newer. Autoconf-2.70 provides ac_cv_prog_cc_c11 when using
+# AC_PROG_CC, but we're still using Autoconf-2.69, and the newest it understands
+# is C99. So handle it ourselves.
+:
+C_DIALECT=
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether C11 is supported by default" >&5
+$as_echo_n "checking whether C11 is supported by default... " >&6; }
+cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h. */
+
+#if !defined __STDC_VERSION__ || __STDC_VERSION__ < 201112L
+# error "C11 support not found"
+#endif
+
+_ACEOF
+if ac_fn_c_try_compile "$LINENO"; then :
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5
+$as_echo "yes" >&6; }
+else
+
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking for -std=c11 support" >&5
+$as_echo_n "checking for -std=c11 support... " >&6; }
+ ac_save_CC="$CC"
+ CC="$CC -std=c11"
+ cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h. */
+
+#if !defined __STDC_VERSION__ || __STDC_VERSION__ < 201112L
+# error "C11 support not found"
+#endif
+
+_ACEOF
+if ac_fn_c_try_compile "$LINENO"; then :
+
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5
+$as_echo "yes" >&6; }
+ CC="$ac_save_CC"
+ C_DIALECT="-std=c11"
+
+else
+ as_fn_error $? "C11 is required" "$LINENO" 5
+fi
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+fi
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+
+
# Some of the common include files depend on bfd.h, and bfd.h checks
# that config.h is included first by testing that the PACKAGE macro
# is defined.
esac
;;
-gnu*)
- version_type=linux
- need_lib_prefix=no
- need_version=no
- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}${major} ${libname}${shared_ext}'
- soname_spec='${libname}${release}${shared_ext}$major'
- shlibpath_var=LD_LIBRARY_PATH
- hardcode_into_libs=yes
- ;;
-
haiku*)
version_type=linux
need_lib_prefix=no
;;
# This must be Linux ELF.
-linux* | k*bsd*-gnu | kopensolaris*-gnu)
+linux* | k*bsd*-gnu | kopensolaris*-gnu | gnu*)
version_type=linux
need_lib_prefix=no
need_version=no
lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2
lt_status=$lt_dlunknown
cat > conftest.$ac_ext <<_LT_EOF
-#line 12867 "configure"
+#line 12907 "configure"
#include "confdefs.h"
#if HAVE_DLFCN_H
lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2
lt_status=$lt_dlunknown
cat > conftest.$ac_ext <<_LT_EOF
-#line 12973 "configure"
+#line 13013 "configure"
#include "confdefs.h"
#if HAVE_DLFCN_H
+2021-01-08 Mike Frysinger <vapier@gentoo.org>
+
+ * configure: Regenerate.
+
2021-01-04 Mike Frysinger <vapier@gentoo.org>
* configure: Regenerate.
DEPDIR
am__leading_dot
PACKAGE
+C_DIALECT
RANLIB
AR
HDEFINES
fi
+# Require C11 or newer. Autoconf-2.70 provides ac_cv_prog_cc_c11 when using
+# AC_PROG_CC, but we're still using Autoconf-2.69, and the newest it understands
+# is C99. So handle it ourselves.
+:
+C_DIALECT=
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether C11 is supported by default" >&5
+$as_echo_n "checking whether C11 is supported by default... " >&6; }
+cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h. */
+
+#if !defined __STDC_VERSION__ || __STDC_VERSION__ < 201112L
+# error "C11 support not found"
+#endif
+
+_ACEOF
+if ac_fn_c_try_compile "$LINENO"; then :
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5
+$as_echo "yes" >&6; }
+else
+
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking for -std=c11 support" >&5
+$as_echo_n "checking for -std=c11 support... " >&6; }
+ ac_save_CC="$CC"
+ CC="$CC -std=c11"
+ cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h. */
+
+#if !defined __STDC_VERSION__ || __STDC_VERSION__ < 201112L
+# error "C11 support not found"
+#endif
+
+_ACEOF
+if ac_fn_c_try_compile "$LINENO"; then :
+
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5
+$as_echo "yes" >&6; }
+ CC="$ac_save_CC"
+ C_DIALECT="-std=c11"
+
+else
+ as_fn_error $? "C11 is required" "$LINENO" 5
+fi
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+fi
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+
+
# Some of the common include files depend on bfd.h, and bfd.h checks
# that config.h is included first by testing that the PACKAGE macro
# is defined.
esac
;;
-gnu*)
- version_type=linux
- need_lib_prefix=no
- need_version=no
- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}${major} ${libname}${shared_ext}'
- soname_spec='${libname}${release}${shared_ext}$major'
- shlibpath_var=LD_LIBRARY_PATH
- hardcode_into_libs=yes
- ;;
-
haiku*)
version_type=linux
need_lib_prefix=no
;;
# This must be Linux ELF.
-linux* | k*bsd*-gnu | kopensolaris*-gnu)
+linux* | k*bsd*-gnu | kopensolaris*-gnu | gnu*)
version_type=linux
need_lib_prefix=no
need_version=no
lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2
lt_status=$lt_dlunknown
cat > conftest.$ac_ext <<_LT_EOF
-#line 12872 "configure"
+#line 12912 "configure"
#include "confdefs.h"
#if HAVE_DLFCN_H
lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2
lt_status=$lt_dlunknown
cat > conftest.$ac_ext <<_LT_EOF
-#line 12978 "configure"
+#line 13018 "configure"
#include "confdefs.h"
#if HAVE_DLFCN_H
+2021-01-08 Mike Frysinger <vapier@gentoo.org>
+
+ * configure: Regenerate.
+
2021-01-04 Mike Frysinger <vapier@gentoo.org>
* configure: Regenerate.
DEPDIR
am__leading_dot
PACKAGE
+C_DIALECT
RANLIB
AR
HDEFINES
fi
+# Require C11 or newer. Autoconf-2.70 provides ac_cv_prog_cc_c11 when using
+# AC_PROG_CC, but we're still using Autoconf-2.69, and the newest it understands
+# is C99. So handle it ourselves.
+:
+C_DIALECT=
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether C11 is supported by default" >&5
+$as_echo_n "checking whether C11 is supported by default... " >&6; }
+cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h. */
+
+#if !defined __STDC_VERSION__ || __STDC_VERSION__ < 201112L
+# error "C11 support not found"
+#endif
+
+_ACEOF
+if ac_fn_c_try_compile "$LINENO"; then :
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5
+$as_echo "yes" >&6; }
+else
+
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking for -std=c11 support" >&5
+$as_echo_n "checking for -std=c11 support... " >&6; }
+ ac_save_CC="$CC"
+ CC="$CC -std=c11"
+ cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h. */
+
+#if !defined __STDC_VERSION__ || __STDC_VERSION__ < 201112L
+# error "C11 support not found"
+#endif
+
+_ACEOF
+if ac_fn_c_try_compile "$LINENO"; then :
+
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5
+$as_echo "yes" >&6; }
+ CC="$ac_save_CC"
+ C_DIALECT="-std=c11"
+
+else
+ as_fn_error $? "C11 is required" "$LINENO" 5
+fi
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+fi
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+
+
# Some of the common include files depend on bfd.h, and bfd.h checks
# that config.h is included first by testing that the PACKAGE macro
# is defined.
esac
;;
-gnu*)
- version_type=linux
- need_lib_prefix=no
- need_version=no
- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}${major} ${libname}${shared_ext}'
- soname_spec='${libname}${release}${shared_ext}$major'
- shlibpath_var=LD_LIBRARY_PATH
- hardcode_into_libs=yes
- ;;
-
haiku*)
version_type=linux
need_lib_prefix=no
;;
# This must be Linux ELF.
-linux* | k*bsd*-gnu | kopensolaris*-gnu)
+linux* | k*bsd*-gnu | kopensolaris*-gnu | gnu*)
version_type=linux
need_lib_prefix=no
need_version=no
lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2
lt_status=$lt_dlunknown
cat > conftest.$ac_ext <<_LT_EOF
-#line 12882 "configure"
+#line 12922 "configure"
#include "confdefs.h"
#if HAVE_DLFCN_H
lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2
lt_status=$lt_dlunknown
cat > conftest.$ac_ext <<_LT_EOF
-#line 12988 "configure"
+#line 13028 "configure"
#include "confdefs.h"
#if HAVE_DLFCN_H
+2021-01-08 Mike Frysinger <vapier@gentoo.org>
+
+ * configure: Regenerate.
+
2021-01-04 Mike Frysinger <vapier@gentoo.org>
* configure: Regenerate.
DEPDIR
am__leading_dot
PACKAGE
+C_DIALECT
RANLIB
AR
HDEFINES
fi
+# Require C11 or newer. Autoconf-2.70 provides ac_cv_prog_cc_c11 when using
+# AC_PROG_CC, but we're still using Autoconf-2.69, and the newest it understands
+# is C99. So handle it ourselves.
+:
+C_DIALECT=
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether C11 is supported by default" >&5
+$as_echo_n "checking whether C11 is supported by default... " >&6; }
+cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h. */
+
+#if !defined __STDC_VERSION__ || __STDC_VERSION__ < 201112L
+# error "C11 support not found"
+#endif
+
+_ACEOF
+if ac_fn_c_try_compile "$LINENO"; then :
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5
+$as_echo "yes" >&6; }
+else
+
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking for -std=c11 support" >&5
+$as_echo_n "checking for -std=c11 support... " >&6; }
+ ac_save_CC="$CC"
+ CC="$CC -std=c11"
+ cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h. */
+
+#if !defined __STDC_VERSION__ || __STDC_VERSION__ < 201112L
+# error "C11 support not found"
+#endif
+
+_ACEOF
+if ac_fn_c_try_compile "$LINENO"; then :
+
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5
+$as_echo "yes" >&6; }
+ CC="$ac_save_CC"
+ C_DIALECT="-std=c11"
+
+else
+ as_fn_error $? "C11 is required" "$LINENO" 5
+fi
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+fi
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+
+
# Some of the common include files depend on bfd.h, and bfd.h checks
# that config.h is included first by testing that the PACKAGE macro
# is defined.
esac
;;
-gnu*)
- version_type=linux
- need_lib_prefix=no
- need_version=no
- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}${major} ${libname}${shared_ext}'
- soname_spec='${libname}${release}${shared_ext}$major'
- shlibpath_var=LD_LIBRARY_PATH
- hardcode_into_libs=yes
- ;;
-
haiku*)
version_type=linux
need_lib_prefix=no
;;
# This must be Linux ELF.
-linux* | k*bsd*-gnu | kopensolaris*-gnu)
+linux* | k*bsd*-gnu | kopensolaris*-gnu | gnu*)
version_type=linux
need_lib_prefix=no
need_version=no
lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2
lt_status=$lt_dlunknown
cat > conftest.$ac_ext <<_LT_EOF
-#line 12888 "configure"
+#line 12928 "configure"
#include "confdefs.h"
#if HAVE_DLFCN_H
lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2
lt_status=$lt_dlunknown
cat > conftest.$ac_ext <<_LT_EOF
-#line 12994 "configure"
+#line 13034 "configure"
#include "confdefs.h"
#if HAVE_DLFCN_H
+2021-01-08 Mike Frysinger <vapier@gentoo.org>
+
+ * configure: Regenerate.
+
2021-01-04 Mike Frysinger <vapier@gentoo.org>
* configure: Regenerate.
DEPDIR
am__leading_dot
PACKAGE
+C_DIALECT
RANLIB
AR
HDEFINES
fi
+# Require C11 or newer. Autoconf-2.70 provides ac_cv_prog_cc_c11 when using
+# AC_PROG_CC, but we're still using Autoconf-2.69, and the newest it understands
+# is C99. So handle it ourselves.
+:
+C_DIALECT=
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether C11 is supported by default" >&5
+$as_echo_n "checking whether C11 is supported by default... " >&6; }
+cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h. */
+
+#if !defined __STDC_VERSION__ || __STDC_VERSION__ < 201112L
+# error "C11 support not found"
+#endif
+
+_ACEOF
+if ac_fn_c_try_compile "$LINENO"; then :
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5
+$as_echo "yes" >&6; }
+else
+
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking for -std=c11 support" >&5
+$as_echo_n "checking for -std=c11 support... " >&6; }
+ ac_save_CC="$CC"
+ CC="$CC -std=c11"
+ cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h. */
+
+#if !defined __STDC_VERSION__ || __STDC_VERSION__ < 201112L
+# error "C11 support not found"
+#endif
+
+_ACEOF
+if ac_fn_c_try_compile "$LINENO"; then :
+
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5
+$as_echo "yes" >&6; }
+ CC="$ac_save_CC"
+ C_DIALECT="-std=c11"
+
+else
+ as_fn_error $? "C11 is required" "$LINENO" 5
+fi
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+fi
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+
+
# Some of the common include files depend on bfd.h, and bfd.h checks
# that config.h is included first by testing that the PACKAGE macro
# is defined.
esac
;;
-gnu*)
- version_type=linux
- need_lib_prefix=no
- need_version=no
- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}${major} ${libname}${shared_ext}'
- soname_spec='${libname}${release}${shared_ext}$major'
- shlibpath_var=LD_LIBRARY_PATH
- hardcode_into_libs=yes
- ;;
-
haiku*)
version_type=linux
need_lib_prefix=no
;;
# This must be Linux ELF.
-linux* | k*bsd*-gnu | kopensolaris*-gnu)
+linux* | k*bsd*-gnu | kopensolaris*-gnu | gnu*)
version_type=linux
need_lib_prefix=no
need_version=no
lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2
lt_status=$lt_dlunknown
cat > conftest.$ac_ext <<_LT_EOF
-#line 12888 "configure"
+#line 12928 "configure"
#include "confdefs.h"
#if HAVE_DLFCN_H
lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2
lt_status=$lt_dlunknown
cat > conftest.$ac_ext <<_LT_EOF
-#line 12994 "configure"
+#line 13034 "configure"
#include "confdefs.h"
#if HAVE_DLFCN_H
projects / binutils-gdb.git / commitdiff