+++ /dev/null
-#
-# Unusual variables checked by this code:
-# NOP - two byte opcode for no-op (defaults to 0)
-# DATA_ADDR - if end-of-text-plus-one-page isn't right for data start
-# INITIAL_READONLY_SECTIONS - at start of text segment
-# OTHER_READONLY_SECTIONS - other than .text .init .rodata ...
-# (e.g., .PARISC.milli)
-# OTHER_TEXT_SECTIONS - these get put in .text when relocating
-# OTHER_READWRITE_SECTIONS - other than .data .bss .ctors .sdata ...
-# (e.g., .PARISC.global)
-# OTHER_SECTIONS - at the end
-# EXECUTABLE_SYMBOLS - symbols that must be defined for an
-# executable (e.g., _DYNAMIC_LINK)
-# TEXT_START_SYMBOLS - symbols that appear at the start of the
-# .text section.
-# DATA_START_SYMBOLS - symbols that appear at the start of the
-# .data section.
-# OTHER_GOT_SYMBOLS - symbols defined just before .got.
-# OTHER_GOT_SECTIONS - sections just after .got and .sdata.
-# OTHER_BSS_SYMBOLS - symbols that appear at the start of the
-# .bss section besides __bss_start.
-# DATA_PLT - .plt should be in data segment, not text segment.
-# TEXT_DYNAMIC - .dynamic in text segment, not data segment.
-# EMBEDDED - whether this is for an embedded system.
-# SHLIB_TEXT_START_ADDR - if set, add to SIZEOF_HEADERS to set
-# start address of shared library.
-# INPUT_FILES - INPUT command of files to always include
-#
-# When adding sections, do note that the names of some sections are used
-# when specifying the start address of the next.
-#
-
-test -z "$ENTRY" && ENTRY=_start
-test -z "${BIG_OUTPUT_FORMAT}" && BIG_OUTPUT_FORMAT=${OUTPUT_FORMAT}
-test -z "${LITTLE_OUTPUT_FORMAT}" && LITTLE_OUTPUT_FORMAT=${OUTPUT_FORMAT}
-if [ -z "$MACHINE" ]; then OUTPUT_ARCH=${ARCH}; else OUTPUT_ARCH=${ARCH}:${MACHINE}; fi
-test -z "${ELFSIZE}" && ELFSIZE=32
-test -z "${ALIGNMENT}" && ALIGNMENT="${ELFSIZE} / 8"
-test "$LD_FLAG" = "N" && DATA_ADDR=.
-INTERP=".interp ${RELOCATING-0} : { *(.interp) }"
-PLT=".plt ${RELOCATING-0} : { *(.plt) }"
-DYNAMIC=".dynamic ${RELOCATING-0} : { *(.dynamic) }"
-
-# if this is for an embedded system, don't add SIZEOF_HEADERS.
-if [ -z "$EMBEDDED" ]; then
- test -z "${TEXT_BASE_ADDRESS}" && TEXT_BASE_ADDRESS="${TEXT_START_ADDR} + SIZEOF_HEADERS"
-else
- test -z "${TEXT_BASE_ADDRESS}" && TEXT_BASE_ADDRESS="${TEXT_START_ADDR}"
-fi
-
-cat <<EOF
-OUTPUT_FORMAT("${OUTPUT_FORMAT}", "${BIG_OUTPUT_FORMAT}",
- "${LITTLE_OUTPUT_FORMAT}")
-OUTPUT_ARCH(${OUTPUT_ARCH})
-ENTRY(${ENTRY})
-
-${RELOCATING+${LIB_SEARCH_DIRS}}
-${RELOCATING+/* Do we need any of these for elf?
- __DYNAMIC = 0; ${STACKZERO+${STACKZERO}} ${SHLIB_PATH+${SHLIB_PATH}} */}
-${RELOCATING+${EXECUTABLE_SYMBOLS}}
-${RELOCATING+${INPUT_FILES}}
-${RELOCATING- /* For some reason, the Solaris linker makes bad executables
- if gld -r is used and the intermediate file has sections starting
- at non-zero addresses. Could be a Solaris ld bug, could be a GNU ld
- bug. But for now assigning the zero vmas works. */}
-
-SECTIONS
-{
- /* Read-only sections, merged into text segment: */
- ${CREATE_SHLIB-${RELOCATING+. = ${TEXT_BASE_ADDRESS};}}
- ${CREATE_SHLIB+${RELOCATING+. = ${SHLIB_TEXT_START_ADDR:-0} + SIZEOF_HEADERS;}}
- ${CREATE_SHLIB-${INTERP}}
- ${INITIAL_READONLY_SECTIONS}
- ${TEXT_DYNAMIC+${DYNAMIC}}
- .hash ${RELOCATING-0} : { *(.hash) }
- .dynsym ${RELOCATING-0} : { *(.dynsym) }
- .dynstr ${RELOCATING-0} : { *(.dynstr) }
- .gnu.version ${RELOCATING-0} : { *(.gnu.version) }
- .gnu.version_d ${RELOCATING-0} : { *(.gnu.version_d) }
- .gnu.version_r ${RELOCATING-0} : { *(.gnu.version_r) }
- .rel.text ${RELOCATING-0} :
- {
- *(.rel.text)
- ${RELOCATING+*(.rel.text.*)}
- ${RELOCATING+*(.rel.gnu.linkonce.t*)}
- }
- .rela.text ${RELOCATING-0} :
- {
- *(.rela.text)
- ${RELOCATING+*(.rela.text.*)}
- ${RELOCATING+*(.rela.gnu.linkonce.t*)}
- }
- .rel.data ${RELOCATING-0} :
- {
- *(.rel.data)
- ${RELOCATING+*(.rel.data.*)}
- ${RELOCATING+*(.rel.gnu.linkonce.d*)}
- }
- .rela.data ${RELOCATING-0} :
- {
- *(.rela.data)
- ${RELOCATING+*(.rela.data.*)}
- ${RELOCATING+*(.rela.gnu.linkonce.d*)}
- }
- .rel.rodata ${RELOCATING-0} :
- {
- *(.rel.rodata)
- ${RELOCATING+*(.rel.rodata.*)}
- ${RELOCATING+*(.rel.gnu.linkonce.r*)}
- }
- .rela.rodata ${RELOCATING-0} :
- {
- *(.rela.rodata)
- ${RELOCATING+*(.rela.rodata.*)}
- ${RELOCATING+*(.rela.gnu.linkonce.r*)}
- }
- .rel.got ${RELOCATING-0} : { *(.rel.got) }
- .rela.got ${RELOCATING-0} : { *(.rela.got) }
- .rel.ctors ${RELOCATING-0} : { *(.rel.ctors) }
- .rela.ctors ${RELOCATING-0} : { *(.rela.ctors) }
- .rel.dtors ${RELOCATING-0} : { *(.rel.dtors) }
- .rela.dtors ${RELOCATING-0} : { *(.rela.dtors) }
- .rel.init ${RELOCATING-0} : { *(.rel.init) }
- .rela.init ${RELOCATING-0} : { *(.rela.init) }
- .rel.fini ${RELOCATING-0} : { *(.rel.fini) }
- .rela.fini ${RELOCATING-0} : { *(.rela.fini) }
- .rel.bss ${RELOCATING-0} : { *(.rel.bss) }
- .rela.bss ${RELOCATING-0} : { *(.rela.bss) }
- .rel.plt ${RELOCATING-0} : { *(.rel.plt) }
- .rela.plt ${RELOCATING-0} : { *(.rela.plt) }
- .init ${RELOCATING-0} : { KEEP (*(.init)) } =${NOP-0}
- ${DATA_PLT-${PLT}}
- .text ${RELOCATING-0} :
- {
- ${RELOCATING+${TEXT_START_SYMBOLS}}
- *(.text)
- *(.glue_7t)
- *(.glue_7)
- ${RELOCATING+*(.text.*)}
- *(.stub)
- /* .gnu.warning sections are handled specially by elf32.em. */
- *(.gnu.warning)
- ${RELOCATING+*(.gnu.linkonce.t*)}
- ${RELOCATING+${OTHER_TEXT_SECTIONS}}
- } =${NOP-0}
- ${RELOCATING+_etext = .;}
- ${RELOCATING+PROVIDE (etext = .);}
- .fini ${RELOCATING-0} : { KEEP (*(.fini)) } =${NOP-0}
- .rodata ${RELOCATING-0} :
- {
- *(.rodata)
- ${RELOCATING+*(.rodata.*)}
- ${RELOCATING+*(.gnu.linkonce.r*)}
- }
- .rodata1 ${RELOCATING-0} : { *(.rodata1) }
- ${RELOCATING+${OTHER_READONLY_SECTIONS}}
-
- /* Adjust the address for the data segment. We want to adjust up to
- the same address within the page on the next page up. */
- ${CREATE_SHLIB-${RELOCATING+. = ${DATA_ADDR-ALIGN(${MAXPAGESIZE}) + (. & (${MAXPAGESIZE} - 1))};}}
- ${CREATE_SHLIB+${RELOCATING+. = ${SHLIB_DATA_ADDR-ALIGN(${MAXPAGESIZE}) + (. & (${MAXPAGESIZE} - 1))};}}
-
- .data ${RELOCATING-0} :
- {
- ${RELOCATING+${DATA_START_SYMBOLS}}
- *(.data)
- ${RELOCATING+*(.data.*)}
- ${RELOCATING+*(.gnu.linkonce.d*)}
- ${CONSTRUCTING+CONSTRUCTORS}
- }
- .data1 ${RELOCATING-0} : { *(.data1) }
- ${RELOCATING+${OTHER_READWRITE_SECTIONS}}
- .ctors ${RELOCATING-0} :
- {
- ${CONSTRUCTING+${CTOR_START}}
- /* gcc uses crtbegin.o to find the start of the constructors, so
- we make sure it is first. Because this is a wildcard, it
- doesn't matter if the user does not actually link against
- crtbegin.o; the linker won't look for a file to match a
- wildcard. The wildcard also means that it doesn't matter which
- directory crtbegin.o is in. */
- KEEP (*crtbegin.o(.ctors))
- KEEP (*(SORT(.ctors.*)))
- KEEP (*(.ctors))
- ${CONSTRUCTING+${CTOR_END}}
- }
- .dtors ${RELOCATING-0} :
- {
- ${CONSTRUCTING+${DTOR_START}}
- KEEP (*crtbegin.o(.dtors))
- KEEP (*(SORT(.dtors.*)))
- KEEP (*(.dtors))
- ${CONSTRUCTING+${DTOR_END}}
- }
- ${DATA_PLT+${PLT}}
- ${RELOCATING+${OTHER_GOT_SYMBOLS}}
- .got ${RELOCATING-0} : { *(.got.plt) *(.got) }
- ${TEXT_DYNAMIC-${DYNAMIC}}
- /* We want the small data sections together, so single-instruction offsets
- can access them all, and initialized data all before uninitialized, so
- we can shorten the on-disk segment size. */
- .sdata ${RELOCATING-0} : { *(.sdata) }
- ${RELOCATING+${OTHER_GOT_SECTIONS}}
- ${RELOCATING+_edata = .;}
- ${RELOCATING+PROVIDE (edata = .);}
- ${RELOCATING+__bss_start = .;}
- ${RELOCATING+__bss_start__ = .;}
- ${RELOCATING+${OTHER_BSS_SYMBOLS}}
- .sbss ${RELOCATING-0} : { *(.sbss) *(.scommon) }
- .bss ${RELOCATING-0} :
- {
- *(.dynbss)
- *(.bss)
- *(COMMON)
- }
- ${RELOCATING+. = ALIGN(${ALIGNMENT});}
- ${RELOCATING+_end = . ;}
- ${RELOCATING+_bss_end__ = . ;}
- ${RELOCATING+__bss_end__ = . ;}
- ${RELOCATING+PROVIDE (end = .);}
-
- /* Stabs debugging sections. */
- .stab 0 : { *(.stab) }
- .stabstr 0 : { *(.stabstr) }
- .stab.excl 0 : { *(.stab.excl) }
- .stab.exclstr 0 : { *(.stab.exclstr) }
- .stab.index 0 : { *(.stab.index) }
- .stab.indexstr 0 : { *(.stab.indexstr) }
-
- .comment 0 : { *(.comment) }
-
- /* DWARF debug sections.
- Symbols in the DWARF debugging sections are relative to the beginning
- of the section so we begin them at 0. */
-
- /* DWARF 1 */
- .debug 0 : { *(.debug) }
- .line 0 : { *(.line) }
-
- /* GNU DWARF 1 extensions */
- .debug_srcinfo 0 : { *(.debug_srcinfo) }
- .debug_sfnames 0 : { *(.debug_sfnames) }
-
- /* DWARF 1.1 and DWARF 2 */
- .debug_aranges 0 : { *(.debug_aranges) }
- .debug_pubnames 0 : { *(.debug_pubnames) }
-
- /* DWARF 2 */
- .debug_info 0 : { *(.debug_info) }
- .debug_abbrev 0 : { *(.debug_abbrev) }
- .debug_line 0 : { *(.debug_line) }
- .debug_frame 0 : { *(.debug_frame) }
- .debug_str 0 : { *(.debug_str) }
- .debug_loc 0 : { *(.debug_loc) }
- .debug_macinfo 0 : { *(.debug_macinfo) }
-
- /* SGI/MIPS DWARF 2 extensions */
- .debug_weaknames 0 : { *(.debug_weaknames) }
- .debug_funcnames 0 : { *(.debug_funcnames) }
- .debug_typenames 0 : { *(.debug_typenames) }
- .debug_varnames 0 : { *(.debug_varnames) }
-
- ${RELOCATING+${OTHER_RELOCATING_SECTIONS}}
-
- /* These must appear regardless of ${RELOCATING}. */
- ${OTHER_SECTIONS}
-}
-EOF
projects / binutils-gdb.git / commitdiff