}
-/* Return true if REGIDX is the number of a register used to pass
- arguments, false otherwise. */
+/* Prologue analysis. */
+
+/* When we analyze a prologue, we're really doing 'abstract
+ interpretation' or 'pseudo-evaluation': running the function's code
+ in simulation, but using conservative approximations of the values
+ it would have when it actually runs. For example, if our function
+ starts with the instruction:
+
+ ahi r1, 42 # add halfword immediate 42 to r1
+
+ we don't know exactly what value will be in r1 after executing this
+ instruction, but we do know it'll be 42 greater than its original
+ value.
+
+ If we then see an instruction like:
+
+ ahi r1, 22 # add halfword immediate 22 to r1
+
+ we still don't know what r1's value is, but again, we can say it is
+ now 64 greater than its original value.
+
+ If the next instruction were:
+
+ lr r2, r1 # set r2 to r1's value
+
+ then we can say that r2's value is now the original value of r1
+ plus 64. And so on.
+
+ Of course, this can only go so far before it gets unreasonable. If
+ we wanted to be able to say anything about the value of r1 after
+ the instruction:
+
+ xr r1, r3 # exclusive-or r1 and r3, place result in r1
+
+ then things would get pretty complex. But remember, we're just
+ doing a conservative approximation; if exclusive-or instructions
+ aren't relevant to prologues, we can just say r1's value is now
+ 'unknown'. We can ignore things that are too complex, if that loss
+ of information is acceptable for our application.
+
+ Once you've reached an instruction that you don't know how to
+ simulate, you stop. Now you examine the state of the registers and
+ stack slots you've kept track of. For example:
+
+ - To see how large your stack frame is, just check the value of sp;
+ if it's the original value of sp minus a constant, then that
+ constant is the stack frame's size. If the sp's value has been
+ marked as 'unknown', then that means the prologue has done
+ something too complex for us to track, and we don't know the
+ frame size.
+
+ - To see whether we've saved the SP in the current frame's back
+ chain slot, we just check whether the current value of the back
+ chain stack slot is the original value of the sp.
+
+ Sure, this takes some work. But prologue analyzers aren't
+ quick-and-simple pattern patching to recognize a few fixed prologue
+ forms any more; they're big, hairy functions. Along with inferior
+ function calls, prologue analysis accounts for a substantial
+ portion of the time needed to stabilize a GDB port. So I think
+ it's worthwhile to look for an approach that will be easier to
+ understand and maintain. In the approach used here:
+
+ - It's easier to see that the analyzer is correct: you just see
+ whether the analyzer properly (albiet conservatively) simulates
+ the effect of each instruction.
+
+ - It's easier to extend the analyzer: you can add support for new
+ instructions, and know that you haven't broken anything that
+ wasn't already broken before.
+
+ - It's orthogonal: to gather new information, you don't need to
+ complicate the code for each instruction. As long as your domain
+ of conservative values is already detailed enough to tell you
+ what you need, then all the existing instruction simulations are
+ already gathering the right data for you.
+
+ A 'struct prologue_value' is a conservative approximation of the
+ real value the register or stack slot will have. */
+
+struct prologue_value {
+
+ /* What sort of value is this? This determines the interpretation
+ of subsequent fields. */
+ enum {
+
+ /* We don't know anything about the value. This is also used for
+ values we could have kept track of, when doing so would have
+ been too complex and we don't want to bother. The bottom of
+ our lattice. */
+ pv_unknown,
+
+ /* A known constant. K is its value. */
+ pv_constant,
+
+ /* The value that register REG originally had *UPON ENTRY TO THE
+ FUNCTION*, plus K. If K is zero, this means, obviously, just
+ the value REG had upon entry to the function. REG is a GDB
+ register number. Before we start interpreting, we initialize
+ every register R to { pv_register, R, 0 }. */
+ pv_register,
+
+ } kind;
+
+ /* The meanings of the following fields depend on 'kind'; see the
+ comments for the specific 'kind' values. */
+ int reg;
+ CORE_ADDR k;
+};
+
+
+/* Set V to be unknown. */
+static void
+pv_set_to_unknown (struct prologue_value *v)
+{
+ v->kind = pv_unknown;
+}
+
+
+/* Set V to the constant K. */
+static void
+pv_set_to_constant (struct prologue_value *v, CORE_ADDR k)
+{
+ v->kind = pv_constant;
+ v->k = k;
+}
+
+
+/* Set V to the original value of register REG, plus K. */
+static void
+pv_set_to_register (struct prologue_value *v, int reg, CORE_ADDR k)
+{
+ v->kind = pv_register;
+ v->reg = reg;
+ v->k = k;
+}
+
+
+/* If one of *A and *B is a constant, and the other isn't, swap the
+ pointers as necessary to ensure that *B points to the constant.
+ This can reduce the number of cases we need to analyze in the
+ functions below. */
+static void
+pv_constant_last (struct prologue_value **a,
+ struct prologue_value **b)
+{
+ if ((*a)->kind == pv_constant
+ && (*b)->kind != pv_constant)
+ {
+ struct prologue_value *temp = *a;
+ *a = *b;
+ *b = temp;
+ }
+}
+
+
+/* Set SUM to the sum of A and B. SUM, A, and B may point to the same
+ 'struct prologue_value' object. */
+static void
+pv_add (struct prologue_value *sum,
+ struct prologue_value *a,
+ struct prologue_value *b)
+{
+ pv_constant_last (&a, &b);
+
+ /* We can handle adding constants to registers, and other constants. */
+ if (b->kind == pv_constant
+ && (a->kind == pv_register
+ || a->kind == pv_constant))
+ {
+ sum->kind = a->kind;
+ sum->reg = a->reg; /* not meaningful if a is pv_constant, but
+ harmless */
+ sum->k = a->k + b->k;
+ }
+
+ /* Anything else we don't know how to add. We don't have a
+ representation for, say, the sum of two registers, or a multiple
+ of a register's value (adding a register to itself). */
+ else
+ sum->kind = pv_unknown;
+}
+
+
+/* Add the constant K to V. */
+static void
+pv_add_constant (struct prologue_value *v, CORE_ADDR k)
+{
+ struct prologue_value pv_k;
+
+ /* Rather than thinking of all the cases we can and can't handle,
+ we'll just let pv_add take care of that for us. */
+ pv_set_to_constant (&pv_k, k);
+ pv_add (v, v, &pv_k);
+}
+
+
+/* Subtract B from A, and put the result in DIFF.
+
+ This isn't quite the same as negating B and adding it to A, since
+ we don't have a representation for the negation of anything but a
+ constant. For example, we can't negate { pv_register, R1, 10 },
+ but we do know that { pv_register, R1, 10 } minus { pv_register,
+ R1, 5 } is { pv_constant, <ignored>, 5 }.
+
+ This means, for example, that we can subtract two stack addresses;
+ they're both relative to the original SP. Since the frame pointer
+ is set based on the SP, its value will be the original SP plus some
+ constant (probably zero), so we can use its value just fine. */
+static void
+pv_subtract (struct prologue_value *diff,
+ struct prologue_value *a,
+ struct prologue_value *b)
+{
+ pv_constant_last (&a, &b);
+
+ /* We can subtract a constant from another constant, or from a
+ register. */
+ if (b->kind == pv_constant
+ && (a->kind == pv_register
+ || a->kind == pv_constant))
+ {
+ diff->kind = a->kind;
+ diff->reg = a->reg; /* not always meaningful, but harmless */
+ diff->k = a->k - b->k;
+ }
+
+ /* We can subtract a register from itself, yielding a constant. */
+ else if (a->kind == pv_register
+ && b->kind == pv_register
+ && a->reg == b->reg)
+ {
+ diff->kind = pv_constant;
+ diff->k = a->k - b->k;
+ }
+
+ /* We don't know how to subtract anything else. */
+ else
+ diff->kind = pv_unknown;
+}
+
+
+/* Set AND to the logical and of A and B. */
+static void
+pv_logical_and (struct prologue_value *and,
+ struct prologue_value *a,
+ struct prologue_value *b)
+{
+ pv_constant_last (&a, &b);
+
+ /* We can 'and' two constants. */
+ if (a->kind == pv_constant
+ && b->kind == pv_constant)
+ {
+ and->kind = pv_constant;
+ and->k = a->k & b->k;
+ }
+
+ /* We can 'and' anything with the constant zero. */
+ else if (b->kind == pv_constant
+ && b->k == 0)
+ {
+ and->kind = pv_constant;
+ and->k = 0;
+ }
+
+ /* We can 'and' anything with ~0. */
+ else if (b->kind == pv_constant
+ && b->k == ~ (CORE_ADDR) 0)
+ *and = *a;
+
+ /* We can 'and' a register with itself. */
+ else if (a->kind == pv_register
+ && b->kind == pv_register
+ && a->reg == b->reg
+ && a->k == b->k)
+ *and = *a;
+
+ /* Otherwise, we don't know. */
+ else
+ pv_set_to_unknown (and);
+}
+
+
+/* Return non-zero iff A and B are identical expressions.
+
+ This is not the same as asking if the two values are equal; the
+ result of such a comparison would have to be a pv_boolean, and
+ asking whether two 'unknown' values were equal would give you
+ pv_maybe. Same for comparing, say, { pv_register, R1, 0 } and {
+ pv_register, R2, 0}. Instead, this is asking whether the two
+ representations are the same. */
static int
-is_arg_reg (int regidx)
+pv_is_identical (struct prologue_value *a,
+ struct prologue_value *b)
{
- return 2 <= regidx && regidx <= 6;
+ if (a->kind != b->kind)
+ return 0;
+
+ switch (a->kind)
+ {
+ case pv_unknown:
+ return 1;
+ case pv_constant:
+ return (a->k == b->k);
+ case pv_register:
+ return (a->reg == b->reg && a->k == b->k);
+ default:
+ gdb_assert (0);
+ }
}
-/* s390_get_frame_info based on Hartmuts
- prologue definition in
- gcc-2.8.1/config/l390/linux.c
+/* Return non-zero if A is the original value of register number R
+ plus K, zero otherwise. */
+static int
+pv_is_register (struct prologue_value *a, int r, CORE_ADDR k)
+{
+ return (a->kind == pv_register
+ && a->reg == r
+ && a->k == k);
+}
- It reads one instruction at a time & based on whether
- it looks like prologue code or not it makes a decision on
- whether the prologue is over, there are various state machines
- in the code to determine if the prologue code is possilby valid.
-
- This is done to hopefully allow the code survive minor revs of
- calling conventions.
- */
+/* A prologue-value-esque boolean type, including "maybe", when we
+ can't figure out whether something is true or not. */
+enum pv_boolean {
+ pv_maybe,
+ pv_definite_yes,
+ pv_definite_no,
+};
+
+
+/* Decide whether a reference to SIZE bytes at ADDR refers exactly to
+ an element of an array. The array starts at ARRAY_ADDR, and has
+ ARRAY_LEN values of ELT_SIZE bytes each. If ADDR definitely does
+ refer to an array element, set *I to the index of the referenced
+ element in the array, and return pv_definite_yes. If it definitely
+ doesn't, return pv_definite_no. If we can't tell, return pv_maybe.
+
+ If the reference does touch the array, but doesn't fall exactly on
+ an element boundary, or doesn't refer to the whole element, return
+ pv_maybe. */
+static enum pv_boolean
+pv_is_array_ref (struct prologue_value *addr,
+ CORE_ADDR size,
+ struct prologue_value *array_addr,
+ CORE_ADDR array_len,
+ CORE_ADDR elt_size,
+ int *i)
+{
+ struct prologue_value offset;
+
+ /* Note that, since ->k is a CORE_ADDR, and CORE_ADDR is unsigned,
+ if addr is *before* the start of the array, then this isn't going
+ to be negative... */
+ pv_subtract (&offset, addr, array_addr);
+ if (offset.kind == pv_constant)
+ {
+ /* This is a rather odd test. We want to know if the SIZE bytes
+ at ADDR don't overlap the array at all, so you'd expect it to
+ be an || expression: "if we're completely before || we're
+ completely after". But with unsigned arithmetic, things are
+ different: since it's a number circle, not a number line, the
+ right values for offset.k are actually one contiguous range. */
+ if (offset.k <= -size
+ && offset.k >= array_len * elt_size)
+ return pv_definite_no;
+ else if (offset.k % elt_size != 0
+ || size != elt_size)
+ return pv_maybe;
+ else
+ {
+ *i = offset.k / elt_size;
+ return pv_definite_yes;
+ }
+ }
+ else
+ return pv_maybe;
+}
+
+
+
+/* Decoding S/390 instructions. */
+
+/* Named opcode values for the S/390 instructions we recognize. Some
+ instructions have their opcode split across two fields; those are the
+ op1_* and op2_* enums. */
+enum
+ {
+ op1_aghi = 0xa7, op2_aghi = 0xb,
+ op1_ahi = 0xa7, op2_ahi = 0xa,
+ op_ar = 0x1a,
+ op_basr = 0x0d,
+ op1_bras = 0xa7, op2_bras = 0x5,
+ op_l = 0x58,
+ op_la = 0x41,
+ op1_larl = 0xc0, op2_larl = 0x0,
+ op_lgr = 0xb904,
+ op1_lghi = 0xa7, op2_lghi = 0x9,
+ op1_lhi = 0xa7, op2_lhi = 0x8,
+ op_lr = 0x18,
+ op_nr = 0x14,
+ op_ngr = 0xb980,
+ op_s = 0x5b,
+ op_st = 0x50,
+ op_std = 0x60,
+ op1_stg = 0xe3, op2_stg = 0x24,
+ op_stm = 0x90,
+ op1_stmg = 0xeb, op2_stmg = 0x24,
+ op_svc = 0x0a,
+ };
+
+
+/* The functions below are for recognizing and decoding S/390
+ instructions of various formats. Each of them checks whether INSN
+ is an instruction of the given format, with the specified opcodes.
+ If it is, it sets the remaining arguments to the values of the
+ instruction's fields, and returns a non-zero value; otherwise, it
+ returns zero.
+
+ These functions' arguments appear in the order they appear in the
+ instruction, not in the machine-language form. So, opcodes always
+ come first, even though they're sometimes scattered around the
+ instructions. And displacements appear before base and extension
+ registers, as they do in the assembly syntax, not at the end, as
+ they do in the machine language. */
static int
-s390_get_frame_info (CORE_ADDR pc, struct frame_extra_info *fextra_info,
- struct frame_info *fi, int init_extra_info)
+is_ri (bfd_byte *insn, int op1, int op2, unsigned int *r1, int *i2)
{
-#define CONST_POOL_REGIDX 13
-#define GOT_REGIDX 12
- bfd_byte instr[S390_MAX_INSTR_SIZE];
- CORE_ADDR test_pc = pc, test_pc2;
- CORE_ADDR orig_sp = 0, save_reg_addr = 0, *saved_regs = NULL;
- int valid_prologue, good_prologue = 0;
- int gprs_saved[S390_NUM_GPRS];
- int fprs_saved[S390_NUM_FPRS];
- int regidx, instrlen;
- int const_pool_state;
- int varargs_state;
- int loop_cnt, gdb_gpr_store, gdb_fpr_store;
- int offset, expected_offset;
- int err = 0;
- disassemble_info info;
+ if (insn[0] == op1 && (insn[1] & 0xf) == op2)
+ {
+ *r1 = (insn[1] >> 4) & 0xf;
+ /* i2 is a 16-bit signed quantity. */
+ *i2 = (((insn[2] << 8) | insn[3]) ^ 0x8000) - 0x8000;
+ return 1;
+ }
+ else
+ return 0;
+}
- /* Have we seen an instruction initializing the frame pointer yet?
- If we've seen an `lr %r11, %r15', then frame_pointer_found is
- non-zero, and frame_pointer_regidx == 11. Otherwise,
- frame_pointer_found is zero and frame_pointer_regidx is 15,
- indicating that we're using the stack pointer as our frame
- pointer. */
- int frame_pointer_found = 0;
- int frame_pointer_regidx = 0xf;
-
- /* What we've seen so far regarding saving the back chain link:
- 0 -- nothing yet; sp still has the same value it had at the entry
- point. Since not all functions allocate frames, this is a
- valid state for the prologue to finish in.
- 1 -- We've saved the original sp in some register other than the
- frame pointer (hard-coded to be %r11, yuck).
- save_link_regidx is the register we saved it in.
- 2 -- We've seen the initial `bras' instruction of the sequence for
- reserving more than 32k of stack:
- bras %rX, .+8
- .long N
- s %r15, 0(%rX)
- where %rX is not the constant pool register.
- subtract_sp_regidx is %rX, and fextra_info->stack_bought is N.
- 3 -- We've reserved space for a new stack frame. This means we
- either saw a simple `ahi %r15,-N' in state 1, or the final
- `s %r15, ...' in state 2.
- 4 -- The frame and link are now fully initialized. We've
- reserved space for the new stack frame, and stored the old
- stack pointer captured in the back chain pointer field. */
- int save_link_state = 0;
- int save_link_regidx, subtract_sp_regidx;
-
- /* What we've seen so far regarding r12 --- the GOT (Global Offset
- Table) pointer. We expect to see `l %r12, N(%r13)', which loads
- r12 with the offset from the constant pool to the GOT, and then
- an `ar %r12, %r13', which adds the constant pool address,
- yielding the GOT's address. Here's what got_state means:
- 0 -- seen nothing
- 1 -- seen `l %r12, N(%r13)', but no `ar'
- 2 -- seen load and add, so GOT pointer is totally initialized
- When got_state is 1, then got_load_addr is the address of the
- load instruction, and got_load_len is the length of that
- instruction. */
- int got_state= 0;
- CORE_ADDR got_load_addr = 0, got_load_len = 0;
-
- const_pool_state = varargs_state = 0;
-
- memset (gprs_saved, 0, sizeof (gprs_saved));
- memset (fprs_saved, 0, sizeof (fprs_saved));
- info.read_memory_func = deprecated_tm_print_insn_info.read_memory_func;
- save_link_regidx = subtract_sp_regidx = 0;
- if (fextra_info)
+static int
+is_ril (bfd_byte *insn, int op1, int op2,
+ unsigned int *r1, int *i2)
+{
+ if (insn[0] == op1 && (insn[1] & 0xf) == op2)
{
- if (fi && get_frame_base (fi))
- {
- orig_sp = get_frame_base (fi);
- if (! init_extra_info && fextra_info->initialised)
- orig_sp += fextra_info->stack_bought;
- saved_regs = get_frame_saved_regs (fi);
- }
- if (init_extra_info || !fextra_info->initialised)
- {
- s390_memset_extra_info (fextra_info);
- fextra_info->function_start = pc;
- fextra_info->initialised = 1;
- }
+ *r1 = (insn[1] >> 4) & 0xf;
+ /* i2 is a signed quantity. If the host 'int' is 32 bits long,
+ no sign extension is necessary, but we don't want to assume
+ that. */
+ *i2 = (((insn[2] << 24)
+ | (insn[3] << 16)
+ | (insn[4] << 8)
+ | (insn[5])) ^ 0x80000000) - 0x80000000;
+ return 1;
}
- instrlen = 0;
- do
+ else
+ return 0;
+}
+
+
+static int
+is_rr (bfd_byte *insn, int op, unsigned int *r1, unsigned int *r2)
+{
+ if (insn[0] == op)
{
- valid_prologue = 0;
- test_pc += instrlen;
- /* add the previous instruction len */
- instrlen = s390_readinstruction (instr, test_pc, &info);
- if (instrlen < 0)
- {
- good_prologue = 0;
- err = -1;
- break;
- }
- /* We probably are in a glibc syscall */
- if (instr[0] == S390_SYSCALL_OPCODE && test_pc == pc)
- {
- good_prologue = 1;
- if (saved_regs && fextra_info && get_next_frame (fi)
- && get_frame_extra_info (get_next_frame (fi))
- && get_frame_extra_info (get_next_frame (fi))->sigcontext)
- {
- /* We are backtracing from a signal handler */
- save_reg_addr = get_frame_extra_info (get_next_frame (fi))->sigcontext +
- REGISTER_BYTE (S390_GP0_REGNUM);
- for (regidx = 0; regidx < S390_NUM_GPRS; regidx++)
- {
- saved_regs[S390_GP0_REGNUM + regidx] = save_reg_addr;
- save_reg_addr += S390_GPR_SIZE;
- }
- save_reg_addr = get_frame_extra_info (get_next_frame (fi))->sigcontext +
- (GDB_TARGET_IS_ESAME ? S390X_SIGREGS_FP0_OFFSET :
- S390_SIGREGS_FP0_OFFSET);
- for (regidx = 0; regidx < S390_NUM_FPRS; regidx++)
- {
- saved_regs[S390_FP0_REGNUM + regidx] = save_reg_addr;
- save_reg_addr += S390_FPR_SIZE;
- }
- }
- break;
- }
- if (save_link_state == 0)
- {
- /* check for a stack relative STMG or STM */
- if (((GDB_TARGET_IS_ESAME &&
- ((instr[0] == 0xeb) && (instr[5] == 0x24))) ||
- (instr[0] == 0x90)) && ((instr[2] >> 4) == 0xf))
- {
- regidx = (instr[1] >> 4);
- if (regidx < 6)
- varargs_state = 1;
- offset = ((instr[2] & 0xf) << 8) + instr[3];
- expected_offset =
- S390_GPR6_STACK_OFFSET + (S390_GPR_SIZE * (regidx - 6));
- if (offset != expected_offset)
- {
- good_prologue = 0;
- break;
- }
- if (saved_regs)
- save_reg_addr = orig_sp + offset;
- for (; regidx <= (instr[1] & 0xf); regidx++)
- {
- if (gprs_saved[regidx])
- {
- good_prologue = 0;
- break;
- }
- good_prologue = 1;
- gprs_saved[regidx] = 1;
- if (saved_regs)
- {
- saved_regs[S390_GP0_REGNUM + regidx] = save_reg_addr;
- save_reg_addr += S390_GPR_SIZE;
- }
- }
- valid_prologue = 1;
- continue;
- }
- }
- /* check for a stack relative STG or ST */
- if ((save_link_state == 0 || save_link_state == 3) &&
- ((GDB_TARGET_IS_ESAME &&
- ((instr[0] == 0xe3) && (instr[5] == 0x24))) ||
- (instr[0] == 0x50)) && ((instr[2] >> 4) == 0xf))
- {
- regidx = instr[1] >> 4;
- offset = ((instr[2] & 0xf) << 8) + instr[3];
- if (offset == 0)
- {
- if (save_link_state == 3 && regidx == save_link_regidx)
- {
- save_link_state = 4;
- valid_prologue = 1;
- continue;
- }
- else
- break;
- }
- if (regidx < 6)
- varargs_state = 1;
- expected_offset =
- S390_GPR6_STACK_OFFSET + (S390_GPR_SIZE * (regidx - 6));
- if (offset != expected_offset)
- {
- good_prologue = 0;
- break;
- }
- if (gprs_saved[regidx])
- {
- good_prologue = 0;
- break;
- }
- good_prologue = 1;
- gprs_saved[regidx] = 1;
- if (saved_regs)
- {
- save_reg_addr = orig_sp + offset;
- saved_regs[S390_GP0_REGNUM + regidx] = save_reg_addr;
- }
- valid_prologue = 1;
- continue;
- }
+ *r1 = (insn[1] >> 4) & 0xf;
+ *r2 = insn[1] & 0xf;
+ return 1;
+ }
+ else
+ return 0;
+}
+
- /* Check for an fp-relative STG, ST, or STM. This is probably
- spilling an argument from a register out into a stack slot.
- This could be a user instruction, but if we haven't included
- any other suspicious instructions in the prologue, this
- could only be an initializing store, which isn't too bad to
- skip. The consequences of not including arg-to-stack spills
- are more serious, though --- you don't see the proper values
- of the arguments. */
- if ((save_link_state == 3 || save_link_state == 4)
- && ((instr[0] == 0x50 /* st %rA, D(%rX,%rB) */
- && (instr[1] & 0xf) == 0 /* %rX is zero, no index reg */
- && is_arg_reg ((instr[1] >> 4) & 0xf)
- && ((instr[2] >> 4) & 0xf) == frame_pointer_regidx)
- || (instr[0] == 0x90 /* stm %rA, %rB, D(%rC) */
- && is_arg_reg ((instr[1] >> 4) & 0xf)
- && is_arg_reg (instr[1] & 0xf)
- && ((instr[2] >> 4) & 0xf) == frame_pointer_regidx)))
+static int
+is_rre (bfd_byte *insn, int op, unsigned int *r1, unsigned int *r2)
+{
+ if (((insn[0] << 8) | insn[1]) == op)
+ {
+ /* Yes, insn[3]. insn[2] is unused in RRE format. */
+ *r1 = (insn[3] >> 4) & 0xf;
+ *r2 = insn[3] & 0xf;
+ return 1;
+ }
+ else
+ return 0;
+}
+
+
+static int
+is_rs (bfd_byte *insn, int op,
+ unsigned int *r1, unsigned int *r3, unsigned int *d2, unsigned int *b2)
+{
+ if (insn[0] == op)
+ {
+ *r1 = (insn[1] >> 4) & 0xf;
+ *r3 = insn[1] & 0xf;
+ *b2 = (insn[2] >> 4) & 0xf;
+ *d2 = ((insn[2] & 0xf) << 8) | insn[3];
+ return 1;
+ }
+ else
+ return 0;
+}
+
+
+static int
+is_rse (bfd_byte *insn, int op1, int op2,
+ unsigned int *r1, unsigned int *r3, unsigned int *d2, unsigned int *b2)
+{
+ if (insn[0] == op1
+ /* Yes, insn[5]. insn[4] is unused. */
+ && insn[5] == op2)
+ {
+ *r1 = (insn[1] >> 4) & 0xf;
+ *r3 = insn[1] & 0xf;
+ *b2 = (insn[2] >> 4) & 0xf;
+ *d2 = ((insn[2] & 0xf) << 8) | insn[3];
+ return 1;
+ }
+ else
+ return 0;
+}
+
+
+static int
+is_rx (bfd_byte *insn, int op,
+ unsigned int *r1, unsigned int *d2, unsigned int *x2, unsigned int *b2)
+{
+ if (insn[0] == op)
+ {
+ *r1 = (insn[1] >> 4) & 0xf;
+ *x2 = insn[1] & 0xf;
+ *b2 = (insn[2] >> 4) & 0xf;
+ *d2 = ((insn[2] & 0xf) << 8) | insn[3];
+ return 1;
+ }
+ else
+ return 0;
+}
+
+
+static int
+is_rxe (bfd_byte *insn, int op1, int op2,
+ unsigned int *r1, unsigned int *d2, unsigned int *x2, unsigned int *b2)
+{
+ if (insn[0] == op1
+ /* Yes, insn[5]. insn[4] is unused. */
+ && insn[5] == op2)
+ {
+ *r1 = (insn[1] >> 4) & 0xf;
+ *x2 = insn[1] & 0xf;
+ *b2 = (insn[2] >> 4) & 0xf;
+ *d2 = ((insn[2] & 0xf) << 8) | insn[3];
+ return 1;
+ }
+ else
+ return 0;
+}
+
+
+/* Set ADDR to the effective address for an X-style instruction, like:
+
+ L R1, D2(X2, B2)
+
+ Here, X2 and B2 are registers, and D2 is an unsigned 12-bit
+ constant; the effective address is the sum of all three. If either
+ X2 or B2 are zero, then it doesn't contribute to the sum --- this
+ means that r0 can't be used as either X2 or B2.
+
+ GPR is an array of general register values, indexed by GPR number,
+ not GDB register number. */
+static void
+compute_x_addr (struct prologue_value *addr,
+ struct prologue_value *gpr,
+ unsigned int d2, unsigned int x2, unsigned int b2)
+{
+ /* We can't just add stuff directly in addr; it might alias some of
+ the registers we need to read. */
+ struct prologue_value result;
+
+ pv_set_to_constant (&result, d2);
+ if (x2)
+ pv_add (&result, &result, &gpr[x2]);
+ if (b2)
+ pv_add (&result, &result, &gpr[b2]);
+
+ *addr = result;
+}
+
+
+/* The number of GPR and FPR spill slots in an S/390 stack frame. We
+ track general-purpose registers r2 -- r15, and floating-point
+ registers f0, f2, f4, and f6. */
+#define S390_NUM_SPILL_SLOTS (14 + 4)
+
+
+/* If the SIZE bytes at ADDR are a stack slot we're actually tracking,
+ return pv_definite_yes and set *STACK to point to the slot. If
+ we're sure that they are not any of our stack slots, then return
+ pv_definite_no. Otherwise, return pv_maybe.
+ - GPR is an array indexed by GPR number giving the current values
+ of the general-purpose registers.
+ - SPILL is an array tracking the spill area of the caller's frame;
+ SPILL[i] is the i'th spill slot. The spill slots are designated
+ for r2 -- r15, and then f0, f2, f4, and f6.
+ - BACK_CHAIN is the value of the back chain slot; it's only valid
+ when the current frame actually has some space for a back chain
+ slot --- that is, when the current value of the stack pointer
+ (according to GPR) is at least S390_STACK_FRAME_OVERHEAD bytes
+ less than its original value. */
+static enum pv_boolean
+s390_on_stack (struct prologue_value *addr,
+ CORE_ADDR size,
+ struct prologue_value *gpr,
+ struct prologue_value *spill,
+ struct prologue_value *back_chain,
+ struct prologue_value **stack)
+{
+ struct prologue_value gpr_spill_addr;
+ struct prologue_value fpr_spill_addr;
+ struct prologue_value back_chain_addr;
+ int i;
+ enum pv_boolean b;
+
+ /* Construct the addresses of the spill arrays and the back chain. */
+ pv_set_to_register (&gpr_spill_addr, S390_SP_REGNUM, 2 * S390_GPR_SIZE);
+ pv_set_to_register (&fpr_spill_addr, S390_SP_REGNUM, 16 * S390_GPR_SIZE);
+ back_chain_addr = gpr[S390_SP_REGNUM - S390_GP0_REGNUM];
+
+ /* We have to check for GPR and FPR references using two separate
+ calls to pv_is_array_ref, since the GPR and FPR spill slots are
+ different sizes. (SPILL is an array, but the thing it tracks
+ isn't really an array.) */
+
+ /* Was it a reference to the GPR spill array? */
+ b = pv_is_array_ref (addr, size, &gpr_spill_addr, 14, S390_GPR_SIZE, &i);
+ if (b == pv_definite_yes)
+ {
+ *stack = &spill[i];
+ return pv_definite_yes;
+ }
+ if (b == pv_maybe)
+ return pv_maybe;
+
+ /* Was it a reference to the FPR spill array? */
+ b = pv_is_array_ref (addr, size, &fpr_spill_addr, 4, S390_FPR_SIZE, &i);
+ if (b == pv_definite_yes)
+ {
+ *stack = &spill[14 + i];
+ return pv_definite_yes;
+ }
+ if (b == pv_maybe)
+ return pv_maybe;
+
+ /* Was it a reference to the back chain?
+ This isn't quite right. We ought to check whether we have
+ actually allocated any new frame at all. */
+ b = pv_is_array_ref (addr, size, &back_chain_addr, 1, S390_GPR_SIZE, &i);
+ if (b == pv_definite_yes)
+ {
+ *stack = back_chain;
+ return pv_definite_yes;
+ }
+ if (b == pv_maybe)
+ return pv_maybe;
+
+ /* All the above queries returned definite 'no's. */
+ return pv_definite_no;
+}
+
+
+/* Do a SIZE-byte store of VALUE to ADDR. GPR, SPILL, and BACK_CHAIN,
+ and the return value are as described for s390_on_stack, above.
+ Note that, when this returns pv_maybe, we have to assume that all
+ of our memory now contains unknown values. */
+static enum pv_boolean
+s390_store (struct prologue_value *addr,
+ CORE_ADDR size,
+ struct prologue_value *value,
+ struct prologue_value *gpr,
+ struct prologue_value *spill,
+ struct prologue_value *back_chain)
+{
+ struct prologue_value *stack;
+ enum pv_boolean on_stack
+ = s390_on_stack (addr, size, gpr, spill, back_chain, &stack);
+
+ if (on_stack == pv_definite_yes)
+ *stack = *value;
+
+ return on_stack;
+}
+
+
+/* The current frame looks like a signal delivery frame: the first
+ instruction is an 'svc' opcode. If the next frame is a signal
+ handler's frame, set FI's saved register map to point into the
+ signal context structure. */
+static void
+s390_get_signal_frame_info (struct frame_info *fi)
+{
+ struct frame_info *next_frame = get_next_frame (fi);
+
+ if (next_frame
+ && get_frame_extra_info (next_frame)
+ && get_frame_extra_info (next_frame)->sigcontext)
+ {
+ /* We're definitely backtracing from a signal handler. */
+ CORE_ADDR *saved_regs = get_frame_saved_regs (fi);
+ CORE_ADDR save_reg_addr = (get_frame_extra_info (next_frame)->sigcontext
+ + REGISTER_BYTE (S390_GP0_REGNUM));
+ int reg;
+
+ for (reg = 0; reg < S390_NUM_GPRS; reg++)
{
- valid_prologue = 1;
- continue;
+ saved_regs[S390_GP0_REGNUM + reg] = save_reg_addr;
+ save_reg_addr += S390_GPR_SIZE;
}
- /* check for STD */
- if (instr[0] == 0x60 && (instr[2] >> 4) == 0xf)
- {
- regidx = instr[1] >> 4;
- if (regidx == 0 || regidx == 2)
- varargs_state = 1;
- if (fprs_saved[regidx])
- {
- good_prologue = 0;
- break;
- }
- fprs_saved[regidx] = 1;
- if (saved_regs)
- {
- save_reg_addr = orig_sp + (((instr[2] & 0xf) << 8) + instr[3]);
- saved_regs[S390_FP0_REGNUM + regidx] = save_reg_addr;
- }
- valid_prologue = 1;
- continue;
- }
+ save_reg_addr = (get_frame_extra_info (next_frame)->sigcontext
+ + (GDB_TARGET_IS_ESAME ? S390X_SIGREGS_FP0_OFFSET :
+ S390_SIGREGS_FP0_OFFSET));
+ for (reg = 0; reg < S390_NUM_FPRS; reg++)
+ {
+ saved_regs[S390_FP0_REGNUM + reg] = save_reg_addr;
+ save_reg_addr += S390_FPR_SIZE;
+ }
+ }
+}
- if (const_pool_state == 0)
- {
+static int
+s390_get_frame_info (CORE_ADDR start_pc,
+ struct frame_extra_info *fextra_info,
+ struct frame_info *fi,
+ int init_extra_info)
+{
+ /* Our return value:
+ zero if we were able to read all the instructions we wanted, or
+ -1 if we got an error trying to read memory. */
+ int result = 0;
- if (GDB_TARGET_IS_ESAME)
- {
- /* Check for larl CONST_POOL_REGIDX,offset on ESAME */
- if ((instr[0] == 0xc0)
- && (instr[1] == (CONST_POOL_REGIDX << 4)))
- {
- const_pool_state = 2;
- valid_prologue = 1;
- continue;
- }
- }
- else
- {
- /* Check for BASR gpr13,gpr0 used to load constant pool pointer to r13 in old compiler */
- if (instr[0] == 0xd && (instr[1] & 0xf) == 0
- && ((instr[1] >> 4) == CONST_POOL_REGIDX))
- {
- const_pool_state = 1;
- valid_prologue = 1;
- continue;
- }
- }
- /* Check for new fangled bras %r13,newpc to load new constant pool */
- /* embedded in code, older pre abi compilers also emitted this stuff. */
- if ((instr[0] == 0xa7) && ((instr[1] & 0xf) == 0x5) &&
- ((instr[1] >> 4) == CONST_POOL_REGIDX)
- && ((instr[2] & 0x80) == 0))
- {
- const_pool_state = 2;
- test_pc +=
- (((((instr[2] & 0xf) << 8) + instr[3]) << 1) - instrlen);
- valid_prologue = 1;
- continue;
- }
- }
- /* Check for AGHI or AHI CONST_POOL_REGIDX,val */
- if (const_pool_state == 1 && (instr[0] == 0xa7) &&
- ((GDB_TARGET_IS_ESAME &&
- (instr[1] == ((CONST_POOL_REGIDX << 4) | 0xb))) ||
- (instr[1] == ((CONST_POOL_REGIDX << 4) | 0xa))))
- {
- const_pool_state = 2;
- valid_prologue = 1;
- continue;
- }
- /* Check for LGR or LR gprx,15 */
- if ((GDB_TARGET_IS_ESAME &&
- instr[0] == 0xb9 && instr[1] == 0x04 && (instr[3] & 0xf) == 0xf) ||
- (instr[0] == 0x18 && (instr[1] & 0xf) == 0xf))
- {
- if (GDB_TARGET_IS_ESAME)
- regidx = instr[3] >> 4;
- else
- regidx = instr[1] >> 4;
- if (save_link_state == 0 && regidx != 0xb)
- {
- /* Almost defintely code for
- decrementing the stack pointer
- ( i.e. a non leaf function
- or else leaf with locals ) */
- save_link_regidx = regidx;
- save_link_state = 1;
- valid_prologue = 1;
- continue;
- }
- /* We use this frame pointer for alloca
- unfortunately we need to assume its gpr11
- otherwise we would need a smarter prologue
- walker. */
- if (!frame_pointer_found && regidx == 0xb)
- {
- frame_pointer_regidx = 0xb;
- frame_pointer_found = 1;
- if (fextra_info)
- fextra_info->frame_pointer_saved_pc = test_pc;
- valid_prologue = 1;
- continue;
- }
- }
- /* Check for AHI or AGHI gpr15,val */
- if (save_link_state == 1 && (instr[0] == 0xa7) &&
- ((GDB_TARGET_IS_ESAME && (instr[1] == 0xfb)) || (instr[1] == 0xfa)))
- {
- if (fextra_info)
- fextra_info->stack_bought =
- -extract_signed_integer (&instr[2], 2);
- save_link_state = 3;
- valid_prologue = 1;
- continue;
- }
- /* Alternatively check for the complex construction for
- buying more than 32k of stack
- BRAS gprx,.+8
- long val
- s %r15,0(%gprx) gprx currently r1 */
- if ((save_link_state == 1) && (instr[0] == 0xa7)
- && ((instr[1] & 0xf) == 0x5) && (instr[2] == 0)
- && (instr[3] == 0x4) && ((instr[1] >> 4) != CONST_POOL_REGIDX))
- {
- subtract_sp_regidx = instr[1] >> 4;
- save_link_state = 2;
- if (fextra_info)
- target_read_memory (test_pc + instrlen,
- (char *) &fextra_info->stack_bought,
- sizeof (fextra_info->stack_bought));
- test_pc += 4;
- valid_prologue = 1;
- continue;
- }
- if (save_link_state == 2 && instr[0] == 0x5b
- && instr[1] == 0xf0 &&
- instr[2] == (subtract_sp_regidx << 4) && instr[3] == 0)
- {
- save_link_state = 3;
- valid_prologue = 1;
- continue;
- }
- /* check for LA gprx,offset(15) used for varargs */
- if ((instr[0] == 0x41) && ((instr[2] >> 4) == 0xf) &&
- ((instr[1] & 0xf) == 0))
- {
- /* some code uses gpr7 to point to outgoing args */
- if (((instr[1] >> 4) == 7) && (save_link_state == 0) &&
- ((instr[2] & 0xf) == 0)
- && (instr[3] == S390_STACK_FRAME_OVERHEAD))
- {
- valid_prologue = 1;
- continue;
- }
- if (varargs_state == 1)
- {
- varargs_state = 2;
- valid_prologue = 1;
- continue;
- }
- }
- /* Check for a GOT load */
+ /* We just use this for reading instructions. */
+ disassemble_info info;
- if (GDB_TARGET_IS_ESAME)
- {
- /* Check for larl GOT_REGIDX, on ESAME */
- if ((got_state == 0) && (instr[0] == 0xc0)
- && (instr[1] == (GOT_REGIDX << 4)))
- {
- got_state = 2;
- valid_prologue = 1;
- continue;
- }
- }
- else
- {
- /* check for l GOT_REGIDX,x(CONST_POOL_REGIDX) */
- if (got_state == 0 && const_pool_state == 2 && instr[0] == 0x58
- && (instr[2] == (CONST_POOL_REGIDX << 4))
- && ((instr[1] >> 4) == GOT_REGIDX))
- {
- got_state = 1;
- got_load_addr = test_pc;
- got_load_len = instrlen;
- valid_prologue = 1;
- continue;
- }
- /* Check for subsequent ar got_regidx,basr_regidx */
- if (got_state == 1 && instr[0] == 0x1a &&
- instr[1] == ((GOT_REGIDX << 4) | CONST_POOL_REGIDX))
- {
- got_state = 2;
- valid_prologue = 1;
- continue;
- }
- }
- }
- while (valid_prologue && good_prologue);
- if (good_prologue)
+ /* The current PC for our abstract interpretation. */
+ CORE_ADDR pc;
+
+ /* The address of the next instruction after that. */
+ CORE_ADDR next_pc;
+
+ /* The general-purpose registers. */
+ struct prologue_value gpr[S390_NUM_GPRS];
+
+ /* The floating-point registers. */
+ struct prologue_value fpr[S390_NUM_FPRS];
+
+ /* The register spill stack slots in the caller's frame ---
+ general-purpose registers r2 through r15, and floating-point
+ registers. spill[i] is where gpr i+2 gets spilled;
+ spill[(14, 15, 16, 17)] is where (f0, f2, f4, f6) get spilled. */
+ struct prologue_value spill[S390_NUM_SPILL_SLOTS];
+
+ /* The value of the back chain slot. This is only valid if the stack
+ pointer is known to be less than its original value --- that is,
+ if we have indeed allocated space on the stack. */
+ struct prologue_value back_chain;
+
+ /* The address of the instruction after the last one that changed
+ the SP, FP, or back chain. */
+ CORE_ADDR after_last_frame_setup_insn = start_pc;
+
+ info.read_memory_func = deprecated_tm_print_insn_info.read_memory_func;
+
+ /* Set up everything's initial value. */
+ {
+ int i;
+
+ for (i = 0; i < S390_NUM_GPRS; i++)
+ pv_set_to_register (&gpr[i], S390_GP0_REGNUM + i, 0);
+
+ for (i = 0; i < S390_NUM_FPRS; i++)
+ pv_set_to_register (&fpr[i], S390_FP0_REGNUM + i, 0);
+
+ for (i = 0; i < S390_NUM_SPILL_SLOTS; i++)
+ pv_set_to_unknown (&spill[i]);
+
+ pv_set_to_unknown (&back_chain);
+ }
+
+ /* Start interpreting instructions, until we hit something we don't
+ know how to interpret. (Ideally, we should stop at the frame's
+ real current PC, but at the moment, our callers don't give us
+ that info.) */
+ for (pc = start_pc; ; pc = next_pc)
{
- /* If this function doesn't reference the global offset table,
- then the compiler may use r12 for other things. If the last
- instruction we saw was a load of r12 from the constant pool,
- with no subsequent add to make the address PC-relative, then
- the load was probably a genuine body instruction; don't treat
- it as part of the prologue. */
- if (got_state == 1
- && got_load_addr + got_load_len == test_pc)
+ bfd_byte insn[S390_MAX_INSTR_SIZE];
+ int insn_len = s390_readinstruction (insn, pc, &info);
+
+ /* Fields for various kinds of instructions. */
+ unsigned int b2, r1, r2, d2, x2, r3;
+ int i2;
+
+ /* The values of SP, FP, and back chain before this instruction,
+ for detecting instructions that change them. */
+ struct prologue_value pre_insn_sp, pre_insn_fp, pre_insn_back_chain;
+
+ /* If we got an error trying to read the instruction, report it. */
+ if (insn_len < 0)
+ {
+ result = -1;
+ break;
+ }
+
+ next_pc = pc + insn_len;
+
+ pre_insn_sp = gpr[S390_SP_REGNUM - S390_GP0_REGNUM];
+ pre_insn_fp = gpr[S390_FRAME_REGNUM - S390_GP0_REGNUM];
+ pre_insn_back_chain = back_chain;
+
+ /* A special case, first --- only recognized as the very first
+ instruction of the function, for signal delivery frames:
+ SVC i --- system call */
+ if (pc == start_pc
+ && is_rr (insn, op_svc, &r1, &r2))
+ {
+ if (fi)
+ s390_get_signal_frame_info (fi);
+ break;
+ }
+
+ /* AHI r1, i2 --- add halfword immediate */
+ else if (is_ri (insn, op1_ahi, op2_ahi, &r1, &i2))
+ pv_add_constant (&gpr[r1], i2);
+
+
+ /* AGHI r1, i2 --- add halfword immediate (64-bit version) */
+ else if (GDB_TARGET_IS_ESAME
+ && is_ri (insn, op1_aghi, op2_aghi, &r1, &i2))
+ pv_add_constant (&gpr[r1], i2);
+
+ /* AR r1, r2 -- add register */
+ else if (is_rr (insn, op_ar, &r1, &r2))
+ pv_add (&gpr[r1], &gpr[r1], &gpr[r2]);
+
+ /* BASR r1, 0 --- branch and save
+ Since r2 is zero, this saves the PC in r1, but doesn't branch. */
+ else if (is_rr (insn, op_basr, &r1, &r2)
+ && r2 == 0)
+ pv_set_to_constant (&gpr[r1], next_pc);
+
+ /* BRAS r1, i2 --- branch relative and save */
+ else if (is_ri (insn, op1_bras, op2_bras, &r1, &i2))
+ {
+ pv_set_to_constant (&gpr[r1], next_pc);
+ next_pc = pc + i2 * 2;
+
+ /* We'd better not interpret any backward branches. We'll
+ never terminate. */
+ if (next_pc <= pc)
+ break;
+ }
+
+ /* L r1, d2(x2, b2) --- load */
+ else if (is_rx (insn, op_l, &r1, &d2, &x2, &b2))
+ {
+ struct prologue_value addr;
+ struct prologue_value *stack;
+
+ compute_x_addr (&addr, gpr, d2, x2, b2);
+
+ /* If it's a load from an in-line constant pool, then we can
+ simulate that, under the assumption that the code isn't
+ going to change between the time the processor actually
+ executed it creating the current frame, and the time when
+ we're analyzing the code to unwind past that frame. */
+ if (addr.kind == pv_constant
+ && start_pc <= addr.k
+ && addr.k < next_pc)
+ pv_set_to_constant (&gpr[r1],
+ read_memory_integer (addr.k, 4));
+
+ /* If it's definitely a reference to something on the stack,
+ we can do that. */
+ else if (s390_on_stack (&addr, 4, gpr, spill, &back_chain, &stack)
+ == pv_definite_yes)
+ gpr[r1] = *stack;
+
+ /* Otherwise, we don't know the value. */
+ else
+ pv_set_to_unknown (&gpr[r1]);
+ }
+
+ /* LA r1, d2(x2, b2) --- load address */
+ else if (is_rx (insn, op_la, &r1, &d2, &x2, &b2))
+ compute_x_addr (&gpr[r1], gpr, d2, x2, b2);
+
+ /* LARL r1, i2 --- load address relative long */
+ else if (GDB_TARGET_IS_ESAME
+ && is_ril (insn, op1_larl, op2_larl, &r1, &i2))
+ pv_set_to_constant (&gpr[r1], pc + i2 * 2);
+
+ /* LGR r1, r2 --- load from register */
+ else if (GDB_TARGET_IS_ESAME
+ && is_rre (insn, op_lgr, &r1, &r2))
+ gpr[r1] = gpr[r2];
+
+ /* LHI r1, i2 --- load halfword immediate */
+ else if (is_ri (insn, op1_lhi, op2_lhi, &r1, &i2))
+ pv_set_to_constant (&gpr[r1], i2);
+
+ /* LGHI r1, i2 --- load halfword immediate --- 64-bit version */
+ else if (is_ri (insn, op1_lghi, op2_lghi, &r1, &i2))
+ pv_set_to_constant (&gpr[r1], i2);
+
+ /* LR r1, r2 --- load from register */
+ else if (is_rr (insn, op_lr, &r1, &r2))
+ gpr[r1] = gpr[r2];
+
+ /* NGR r1, r2 --- logical and --- 64-bit version */
+ else if (GDB_TARGET_IS_ESAME
+ && is_rre (insn, op_ngr, &r1, &r2))
+ pv_logical_and (&gpr[r1], &gpr[r1], &gpr[r2]);
+
+ /* NR r1, r2 --- logical and */
+ else if (is_rr (insn, op_nr, &r1, &r2))
+ pv_logical_and (&gpr[r1], &gpr[r1], &gpr[r2]);
+
+ /* NGR r1, r2 --- logical and --- 64-bit version */
+ else if (GDB_TARGET_IS_ESAME
+ && is_rre (insn, op_ngr, &r1, &r2))
+ pv_logical_and (&gpr[r1], &gpr[r1], &gpr[r2]);
+
+ /* NR r1, r2 --- logical and */
+ else if (is_rr (insn, op_nr, &r1, &r2))
+ pv_logical_and (&gpr[r1], &gpr[r1], &gpr[r2]);
+
+ /* S r1, d2(x2, b2) --- subtract from memory */
+ else if (is_rx (insn, op_s, &r1, &d2, &x2, &b2))
+ {
+ struct prologue_value addr;
+ struct prologue_value value;
+ struct prologue_value *stack;
+
+ compute_x_addr (&addr, gpr, d2, x2, b2);
+
+ /* If it's a load from an in-line constant pool, then we can
+ simulate that, under the assumption that the code isn't
+ going to change between the time the processor actually
+ executed it and the time when we're analyzing it. */
+ if (addr.kind == pv_constant
+ && start_pc <= addr.k
+ && addr.k < pc)
+ pv_set_to_constant (&value, read_memory_integer (addr.k, 4));
+
+ /* If it's definitely a reference to something on the stack,
+ we could do that. */
+ else if (s390_on_stack (&addr, 4, gpr, spill, &back_chain, &stack)
+ == pv_definite_yes)
+ value = *stack;
+
+ /* Otherwise, we don't know the value. */
+ else
+ pv_set_to_unknown (&value);
+
+ pv_subtract (&gpr[r1], &gpr[r1], &value);
+ }
+
+ /* ST r1, d2(x2, b2) --- store */
+ else if (is_rx (insn, op_st, &r1, &d2, &x2, &b2))
+ {
+ struct prologue_value addr;
+
+ compute_x_addr (&addr, gpr, d2, x2, b2);
+
+ /* The below really should be '4', not 'S390_GPR_SIZE'; this
+ instruction always stores 32 bits, regardless of the full
+ size of the GPR. */
+ if (s390_store (&addr, 4, &gpr[r1], gpr, spill, &back_chain)
+ == pv_maybe)
+ /* If we can't be sure that it's *not* a store to
+ something we're tracing, then we would have to mark all
+ our memory as unknown --- after all, it *could* be a
+ store to any of them --- so we might as well just stop
+ interpreting. */
+ break;
+ }
+
+ /* STD r1, d2(x2,b2) --- store floating-point register */
+ else if (is_rx (insn, op_std, &r1, &d2, &x2, &b2))
+ {
+ struct prologue_value addr;
+
+ compute_x_addr (&addr, gpr, d2, x2, b2);
+
+ if (s390_store (&addr, 8, &fpr[r1], gpr, spill, &back_chain)
+ == pv_maybe)
+ /* If we can't be sure that it's *not* a store to
+ something we're tracing, then we would have to mark all
+ our memory as unknown --- after all, it *could* be a
+ store to any of them --- so we might as well just stop
+ interpreting. */
+ break;
+ }
+
+ /* STG r1, d2(x2, b2) --- 64-bit store */
+ else if (GDB_TARGET_IS_ESAME
+ && is_rxe (insn, op1_stg, op2_stg, &r1, &d2, &x2, &b2))
+ {
+ struct prologue_value addr;
+
+ compute_x_addr (&addr, gpr, d2, x2, b2);
+
+ /* The below really should be '8', not 'S390_GPR_SIZE'; this
+ instruction always stores 64 bits, regardless of the full
+ size of the GPR. */
+ if (s390_store (&addr, 8, &gpr[r1], gpr, spill, &back_chain)
+ == pv_maybe)
+ /* If we can't be sure that it's *not* a store to
+ something we're tracing, then we would have to mark all
+ our memory as unknown --- after all, it *could* be a
+ store to any of them --- so we might as well just stop
+ interpreting. */
+ break;
+ }
+
+ /* STM r1, r3, d2(b2) --- store multiple */
+ else if (is_rs (insn, op_stm, &r1, &r3, &d2, &b2))
+ {
+ int regnum;
+ int offset;
+ struct prologue_value addr;
+
+ for (regnum = r1, offset = 0;
+ regnum <= r3;
+ regnum++, offset += 4)
+ {
+ compute_x_addr (&addr, gpr, d2 + offset, 0, b2);
+
+ if (s390_store (&addr, 4, &gpr[regnum], gpr, spill, &back_chain)
+ == pv_maybe)
+ /* If we can't be sure that it's *not* a store to
+ something we're tracing, then we would have to mark all
+ our memory as unknown --- after all, it *could* be a
+ store to any of them --- so we might as well just stop
+ interpreting. */
+ break;
+ }
+
+ /* If we left the loop early, we should stop interpreting
+ altogether. */
+ if (regnum <= r3)
+ break;
+ }
+
+ /* STMG r1, r3, d2(b2) --- store multiple, 64-bit */
+ else if (GDB_TARGET_IS_ESAME
+ && is_rse (insn, op1_stmg, op2_stmg, &r1, &r3, &d2, &b2))
{
- test_pc = got_load_addr;
- instrlen = got_load_len;
+ int regnum;
+ int offset;
+ struct prologue_value addr;
+
+ for (regnum = r1, offset = 0;
+ regnum <= r3;
+ regnum++, offset += 8)
+ {
+ compute_x_addr (&addr, gpr, d2 + offset, 0, b2);
+
+ if (s390_store (&addr, 8, &gpr[regnum], gpr, spill, &back_chain)
+ == pv_maybe)
+ /* If we can't be sure that it's *not* a store to
+ something we're tracing, then we would have to mark all
+ our memory as unknown --- after all, it *could* be a
+ store to any of them --- so we might as well just stop
+ interpreting. */
+ break;
+ }
+
+ /* If we left the loop early, we should stop interpreting
+ altogether. */
+ if (regnum <= r3)
+ break;
}
+
+ else
+ /* An instruction we don't know how to simulate. The only
+ safe thing to do would be to set every value we're tracking
+ to 'unknown'. Instead, we'll be optimistic: we just stop
+ interpreting, and assume that the machine state we've got
+ now is good enough for unwinding the stack. */
+ break;
+
+ /* Record the address after the last instruction that changed
+ the FP, SP, or backlink. Ignore instructions that changed
+ them back to their original values --- those are probably
+ restore instructions. (The back chain is never restored,
+ just popped.) */
+ {
+ struct prologue_value *sp = &gpr[S390_SP_REGNUM - S390_GP0_REGNUM];
+ struct prologue_value *fp = &gpr[S390_FRAME_REGNUM - S390_GP0_REGNUM];
- good_prologue = (((const_pool_state == 0) || (const_pool_state == 2)) &&
- ((save_link_state == 0) || (save_link_state == 4)) &&
- ((varargs_state == 0) || (varargs_state == 2)));
+ if ((! pv_is_identical (&pre_insn_sp, sp)
+ && ! pv_is_register (sp, S390_SP_REGNUM, 0))
+ || (! pv_is_identical (&pre_insn_fp, fp)
+ && ! pv_is_register (fp, S390_FRAME_REGNUM, 0))
+ || ! pv_is_identical (&pre_insn_back_chain, &back_chain))
+ after_last_frame_setup_insn = next_pc;
+ }
}
- if (fextra_info)
+
+ /* Okay, now gpr[], fpr[], spill[], and back_chain reflect the state
+ of the machine as of the first instruction we couldn't interpret
+ (hopefully the first non-prologue instruction). */
+ {
+ /* The size of the frame, or (CORE_ADDR) -1 if we couldn't figure
+ that out. */
+ CORE_ADDR frame_size = -1;
+
+ /* The value the SP had upon entry to the function, or
+ (CORE_ADDR) -1 if we can't figure that out. */
+ CORE_ADDR original_sp = -1;
+
+ /* Are we using S390_FRAME_REGNUM as a frame pointer register? */
+ int using_frame_pointer = 0;
+
+ /* If S390_FRAME_REGNUM is some constant offset from the SP, then
+ that strongly suggests that we're going to use that as our
+ frame pointer register, not the SP. */
{
- fextra_info->good_prologue = good_prologue;
- fextra_info->skip_prologue_function_start =
- (good_prologue ? test_pc : pc);
+ struct prologue_value *fp = &gpr[S390_FRAME_REGNUM - S390_GP0_REGNUM];
+
+ if (fp->kind == pv_register
+ && fp->reg == S390_SP_REGNUM)
+ using_frame_pointer = 1;
}
- if (saved_regs)
- /* The SP's element of the saved_regs array holds the old SP,
- not the address at which it is saved. */
- saved_regs[S390_SP_REGNUM] = orig_sp;
- return err;
+
+ /* If we were given a frame_info structure, we may be able to use
+ the frame's base address to figure out the actual value of the
+ original SP. */
+ if (fi && get_frame_base (fi))
+ {
+ int frame_base_regno;
+ struct prologue_value *frame_base;
+
+ /* The meaning of the frame base depends on whether the
+ function uses a frame pointer register other than the SP or
+ not (see s390_read_fp):
+ - If the function does use a frame pointer register other
+ than the SP, then the frame base is that register's
+ value.
+ - If the function doesn't use a frame pointer, then the
+ frame base is the SP itself.
+ We're duplicating some of the logic of s390_fp_regnum here,
+ but we don't want to call that, because it would just do
+ exactly the same analysis we've already done above. */
+ if (using_frame_pointer)
+ frame_base_regno = S390_FRAME_REGNUM;
+ else
+ frame_base_regno = S390_SP_REGNUM;
+
+ frame_base = &gpr[frame_base_regno - S390_GP0_REGNUM];
+
+ /* We know the frame base address; if the value of whatever
+ register it came from is a constant offset from the
+ original SP, then we can reconstruct the original SP just
+ by subtracting off that constant. */
+ if (frame_base->kind == pv_register
+ && frame_base->reg == S390_SP_REGNUM)
+ original_sp = get_frame_base (fi) - frame_base->k;
+ }
+
+ /* If the analysis said that the current SP value is the original
+ value less some constant, then that constant is the frame size. */
+ {
+ struct prologue_value *sp = &gpr[S390_SP_REGNUM - S390_GP0_REGNUM];
+
+ if (sp->kind == pv_register
+ && sp->reg == S390_SP_REGNUM)
+ frame_size = -sp->k;
+ }
+
+ /* If we knew other registers' current values, we could check if
+ the analysis said any of those were related to the original SP
+ value, too. But for now, we'll just punt. */
+
+ /* If the caller passed in an 'extra info' structure, fill in the
+ parts we can. */
+ if (fextra_info)
+ {
+ if (init_extra_info || ! fextra_info->initialised)
+ {
+ s390_memset_extra_info (fextra_info);
+ fextra_info->function_start = start_pc;
+ fextra_info->initialised = 1;
+ }
+
+ if (frame_size != -1)
+ {
+ fextra_info->stack_bought = frame_size;
+ }
+
+ /* Assume everything was okay, and indicate otherwise when we
+ find something amiss. */
+ fextra_info->good_prologue = 1;
+
+ if (using_frame_pointer)
+ /* Actually, nobody cares about the exact PC, so any
+ non-zero value will do here. */
+ fextra_info->frame_pointer_saved_pc = 1;
+
+ /* If we weren't able to find the size of the frame, or find
+ the original sp based on actual current register values,
+ then we're not going to be able to unwind this frame.
+
+ (If we're just doing prologue analysis to set a breakpoint,
+ then frame_size might be known, but original_sp unknown; if
+ we're analyzing a real frame which uses alloca, then
+ original_sp might be known (from the frame pointer
+ register), but the frame size might be unknown.) */
+ if (original_sp == -1 && frame_size == -1)
+ fextra_info->good_prologue = 0;
+
+ if (fextra_info->good_prologue)
+ fextra_info->skip_prologue_function_start
+ = after_last_frame_setup_insn;
+ else
+ /* If the prologue was too complex for us to make sense of,
+ then perhaps it's better to just not skip anything at
+ all. */
+ fextra_info->skip_prologue_function_start = start_pc;
+ }
+
+ /* Indicate where registers were saved on the stack, if:
+ - the caller seems to want to know,
+ - the caller provided an actual SP, and
+ - the analysis gave us enough information to actually figure it
+ out. */
+ if (fi
+ && get_frame_saved_regs (fi)
+ && original_sp != -1)
+ {
+ int slot_num;
+ CORE_ADDR slot_addr;
+ CORE_ADDR *saved_regs = get_frame_saved_regs (fi);
+
+ /* Scan the spill array; if a spill slot says it holds the
+ original value of some register, then record that slot's
+ address as the place that register was saved.
+
+ Just for kicks, note that, even if registers aren't saved
+ in their officially-sanctioned slots, this will still work
+ --- we know what really got put where. */
+
+ /* First, the slots for r2 -- r15. */
+ for (slot_num = 0, slot_addr = original_sp + 2 * S390_GPR_SIZE;
+ slot_num < 14;
+ slot_num++, slot_addr += S390_GPR_SIZE)
+ {
+ struct prologue_value *slot = &spill[slot_num];
+
+ if (slot->kind == pv_register
+ && slot->k == 0)
+ saved_regs[slot->reg] = slot_addr;
+ }
+
+ /* Then, the slots for f0, f2, f4, and f6. They're a
+ different size. */
+ for (slot_num = 14, slot_addr = original_sp + 16 * S390_GPR_SIZE;
+ slot_num < S390_NUM_SPILL_SLOTS;
+ slot_num++, slot_addr += S390_FPR_SIZE)
+ {
+ struct prologue_value *slot = &spill[slot_num];
+
+ if (slot->kind == pv_register
+ && slot->k == 0)
+ saved_regs[slot->reg] = slot_addr;
+ }
+
+ /* The stack pointer's element of saved_regs[] is special. */
+ saved_regs[S390_SP_REGNUM] = original_sp;
+ }
+ }
+
+ return result;
}
projects / binutils-gdb.git / commitdiff