match stubs and protocol spec.
* gdbserver/remote-utils.c (remote_open): Cast to struct sockaddr
when passing to function which expects that.
The following changes aren't quite enough to make things work with
LynxOS (apprently kernel problems).
* infrun.c (wait_for_inferior): When resuming new thread, pass pid
not -1 for remote case.
* thread.c (info_threads_command): Give error if !target_has_stack.
* infrun.c (start_remote): Call init_thread_list.
* thread.c (info_threads_command): Don't call kill for remote
debugging target.
* target.c (normal_pid_to_str): Print "thread" not "process" for
remote.
* remote.c, gdbserver/*: Add 'H', 'S', and 'C' requests, 'X'
response, and `thread' part of 'T' response.
* gdbserver/*: If program exits, send packet to GDB before
exiting. Handle termination with a signal the same as exiting
with an exitstatus.
* remote.c: Don't try to kill program after getting an 'X'
response.
* infrun.c (wait_for_inferior): Add comment about kill versus mourn.
+Wed Dec 7 14:50:54 1994 Jim Kingdon <kingdon@deneb.cygnus.com>
+
+ * gdbserver/remote-utils.c (write_ok): Write "OK", not "Ok", to
+ match stubs and protocol spec.
+ * gdbserver/remote-utils.c (remote_open): Cast to struct sockaddr
+ when passing to function which expects that.
+
+ The following changes aren't quite enough to make things work with
+ LynxOS (apprently kernel problems).
+ * infrun.c (wait_for_inferior): When resuming new thread, pass pid
+ not -1 for remote case.
+ * thread.c (info_threads_command): Give error if !target_has_stack.
+ * infrun.c (start_remote): Call init_thread_list.
+ * thread.c (info_threads_command): Don't call kill for remote
+ debugging target.
+ * target.c (normal_pid_to_str): Print "thread" not "process" for
+ remote.
+ * remote.c, gdbserver/*: Add 'H', 'S', and 'C' requests, 'X'
+ response, and `thread' part of 'T' response.
+ * gdbserver/*: If program exits, send packet to GDB before
+ exiting. Handle termination with a signal the same as exiting
+ with an exitstatus.
+ * remote.c: Don't try to kill program after getting an 'X'
+ response.
+ * infrun.c (wait_for_inferior): Add comment about kill versus mourn.
+
Thu Dec 8 12:37:38 1994 Rob Savoye <rob@darkstar.cygnus.com>
* config/pa/tm-pro.h tm-hppap.h, hppapro.mt: Rename tm-hppap.h to
int pid;
union wait w;
- enable_async_io();
+ while (1)
+ {
+ enable_async_io();
+
+ pid = wait (&w);
+
+ disable_async_io();
- pid = wait (&w);
+ if (pid != PIDGET(inferior_pid))
+ perror_with_name ("wait");
- disable_async_io();
+ thread_from_wait = w.w_tid;
+ inferior_pid = BUILDPID (inferior_pid, w.w_tid);
+ printf ("mywait: pid=0x%x, thread=0x%x, inferior_pid=0x%x\n",
+ pid, w.w_tid, inferior_pid);
+
+ if (WIFSTOPPED(w)
+ && WSTOPSIG(w) == SIGTRAP)
+ {
+ int realsig;
- if (pid != PIDGET(inferior_pid))
- perror_with_name ("wait");
+ realsig = ptrace (PTRACE_GETTRACESIG, inferior_pid,
+ (PTRACE_ARG3_TYPE)0, 0);
- inferior_pid = BUILDPID (inferior_pid, w.w_tid);
+ if (realsig == SIGNEWTHREAD)
+ {
+ /* Simply ignore new thread notification, as we can't do anything
+ useful with such threads. All ptrace calls at this point just
+ fail for no apparent reason. The thread will eventually get a
+ real signal when it becomes real. */
+ myresume (0, 0);
+ continue;
+ }
+ }
+ break;
+ }
if (WIFEXITED (w))
{
- fprintf (stderr, "\nChild exited with status %d\n", WEXITSTATUS (w));
- fprintf (stderr, "GDBserver exiting\n");
- exit (0);
+ *status = 'W';
+ return ((unsigned char) WEXITSTATUS (w));
}
else if (!WIFSTOPPED (w))
{
- fprintf (stderr, "\nChild terminated with signal = %x \n", WTERMSIG (w));
- *status = 'T';
+ *status = 'X';
return ((unsigned char) WTERMSIG (w));
}
fetch_inferior_registers (0);
- *status = 'S';
+ *status = 'T';
return ((unsigned char) WSTOPSIG (w));
}
int signal;
{
errno = 0;
- ptrace (step ? PTRACE_SINGLESTEP : PTRACE_CONT, inferior_pid, 1, signal);
+ ptrace (step ? PTRACE_SINGLESTEP_ONE : PTRACE_CONT,
+ BUILDPID (inferior_pid, cont_thread == -1 ? 0 : cont_thread),
+ 1, signal);
if (errno)
perror_with_name ("ptrace");
}
int i;
errno = 0;
- retval = ptrace (PTRACE_GETREGS, inferior_pid, (PTRACE_ARG3_TYPE) &ec,
+ retval = ptrace (PTRACE_GETREGS,
+ BUILDPID (inferior_pid, general_thread),
+ (PTRACE_ARG3_TYPE) &ec,
0);
if (errno)
perror_with_name ("Sparc fetch_inferior_registers(ptrace)");
int i;
errno = 0;
- retval = ptrace (PTRACE_GETFPREGS, inferior_pid, (PTRACE_ARG3_TYPE) &fc,
+ retval = ptrace (PTRACE_GETFPREGS, BUILDPID (inferior_pid, general_thread), (PTRACE_ARG3_TYPE) &fc,
0);
if (errno)
perror_with_name ("Sparc fetch_inferior_registers(ptrace)");
8 * REGISTER_RAW_SIZE (O0_REGNUM));
errno = 0;
- retval = ptrace (PTRACE_SETREGS, inferior_pid, (PTRACE_ARG3_TYPE) &ec,
+ retval = ptrace (PTRACE_SETREGS, BUILDPID (inferior_pid, general_thread), (PTRACE_ARG3_TYPE) &ec,
0);
if (errno)
perror_with_name ("Sparc fetch_inferior_registers(ptrace)");
/* We read fcontext first so that we can get good values for fq_t... */
errno = 0;
- retval = ptrace (PTRACE_GETFPREGS, inferior_pid, (PTRACE_ARG3_TYPE) &fc,
+ retval = ptrace (PTRACE_GETFPREGS, BUILDPID (inferior_pid, general_thread), (PTRACE_ARG3_TYPE) &fc,
0);
if (errno)
perror_with_name ("Sparc fetch_inferior_registers(ptrace)");
fc.fsr = read_register (FPS_REGNUM);
errno = 0;
- retval = ptrace (PTRACE_SETFPREGS, inferior_pid, (PTRACE_ARG3_TYPE) &fc,
+ retval = ptrace (PTRACE_SETFPREGS, BUILDPID (inferior_pid, general_thread), (PTRACE_ARG3_TYPE) &fc,
0);
if (errno)
perror_with_name ("Sparc fetch_inferior_registers(ptrace)");
CORE_ADDR ecp;
errno = 0;
- stblock = (CORE_ADDR) ptrace (PTRACE_THREADUSER, inferior_pid,
+ stblock = (CORE_ADDR) ptrace (PTRACE_THREADUSER, BUILDPID (inferior_pid, general_thread),
(PTRACE_ARG3_TYPE)0, 0);
if (errno)
perror_with_name ("PTRACE_THREADUSER");
- ecp = (CORE_ADDR) ptrace (PTRACE_PEEKTHREAD, inferior_pid,
+ ecp = (CORE_ADDR) ptrace (PTRACE_PEEKTHREAD, BUILDPID (inferior_pid, general_thread),
(PTRACE_ARG3_TYPE)ecpoff, 0);
if (errno)
perror_with_name ("lynx_registers_addr(PTRACE_PEEKTHREAD)");
#endif
errno = 0;
- reg = ptrace (ptrace_fun, inferior_pid,
+ reg = ptrace (ptrace_fun, BUILDPID (inferior_pid, general_thread),
(PTRACE_ARG3_TYPE) (ecp + regmap[regno]), 0);
if (errno)
perror_with_name ("fetch_inferior_registers(PTRACE_PEEKTHREAD)");
reg = *(unsigned long *)®isters[REGISTER_BYTE (regno)];
errno = 0;
- ptrace (ptrace_fun, inferior_pid,
+ ptrace (ptrace_fun, BUILDPID (inferior_pid, general_thread),
(PTRACE_ARG3_TYPE) (ecp + regmap[regno]), reg);
if (errno)
perror_with_name ("PTRACE_POKEUSER");
/* Read all the longwords */
for (i = 0; i < count; i++, addr += sizeof (int))
{
- buffer[i] = ptrace (PTRACE_PEEKTEXT, inferior_pid, addr, 0);
+ buffer[i] = ptrace (PTRACE_PEEKTEXT, BUILDPID (inferior_pid, general_thread), addr, 0);
}
/* Copy appropriate bytes out of the buffer. */
/* Fill start and end extra bytes of buffer with existing memory data. */
- buffer[0] = ptrace (PTRACE_PEEKTEXT, inferior_pid, addr, 0);
+ buffer[0] = ptrace (PTRACE_PEEKTEXT, BUILDPID (inferior_pid, general_thread), addr, 0);
if (count > 1)
{
buffer[count - 1]
- = ptrace (PTRACE_PEEKTEXT, inferior_pid,
+ = ptrace (PTRACE_PEEKTEXT, BUILDPID (inferior_pid, general_thread),
addr + (count - 1) * sizeof (int), 0);
}
while (1)
{
errno = 0;
- ptrace (PTRACE_POKETEXT, inferior_pid, addr, buffer[i]);
+ ptrace (PTRACE_POKETEXT, BUILDPID (inferior_pid, general_thread), addr, buffer[i]);
if (errno)
{
- fprintf(stderr, "ptrace (PTRACE_POKETEXT): errno=%d, inferior_pid=0x%x, addr=0x%x, buffer[i] = 0x%x\n", errno, inferior_pid, addr, buffer[i]);
+ fprintf(stderr, "\
+ptrace (PTRACE_POKETEXT): errno=%d, pid=0x%x, addr=0x%x, buffer[i] = 0x%x\n",
+ errno, BUILDPID (inferior_pid, general_thread),
+ addr, buffer[i]);
fprintf(stderr, "Sleeping for 1 second\n");
sleep(1);
}
if (WIFEXITED (w))
{
fprintf (stderr, "\nChild exited with retcode = %x \n", WEXITSTATUS (w));
- *status = 'E';
+ *status = 'W';
return ((unsigned char) WEXITSTATUS (w));
}
else if (!WIFSTOPPED (w))
{
fprintf (stderr, "\nChild terminated with signal = %x \n", WTERMSIG (w));
- *status = 'T';
+ *status = 'X';
return ((unsigned char) WTERMSIG (w));
}
fetch_inferior_registers (0);
- *status = 'S';
+ *status = 'T';
return ((unsigned char) WSTOPSIG (w));
}
if (WIFEXITED (w))
{
fprintf (stderr, "\nChild exited with retcode = %x \n", WEXITSTATUS (w));
- *status = 'E';
+ *status = 'W';
return ((unsigned char) WEXITSTATUS (w));
}
else if (!WIFSTOPPED (w))
{
fprintf (stderr, "\nChild terminated with signal = %x \n", WTERMSIG (w));
- *status = 'T';
+ *status = 'X';
return ((unsigned char) WTERMSIG (w));
}
fetch_inferior_registers (0);
- *status = 'S';
+ *status = 'T';
return ((unsigned char) WSTOPSIG (w));
}
/* Prototypes for local functions */
-static void
-signals_info PARAMS ((char *, int));
+static void signals_info PARAMS ((char *, int));
-static void
-handle_command PARAMS ((char *, int));
+static void handle_command PARAMS ((char *, int));
static void sig_print_info PARAMS ((enum target_signal));
-static void
-sig_print_header PARAMS ((void));
+static void sig_print_header PARAMS ((void));
-static void
-resume_cleanups PARAMS ((int));
+static void resume_cleanups PARAMS ((int));
-static int
-hook_stop_stub PARAMS ((char *));
+static int hook_stop_stub PARAMS ((char *));
/* GET_LONGJMP_TARGET returns the PC at which longjmp() will resume the
program. It needs to examine the jmp_buf argument and extract the PC
from it. The return value is non-zero on success, zero otherwise. */
+
#ifndef GET_LONGJMP_TARGET
#define GET_LONGJMP_TARGET(PC_ADDR) 0
#endif
/* Some machines have trampoline code that sits between function callers
and the actual functions themselves. If this machine doesn't have
such things, disable their processing. */
+
#ifndef SKIP_TRAMPOLINE_CODE
#define SKIP_TRAMPOLINE_CODE(pc) 0
#endif
/* For SVR4 shared libraries, each call goes through a small piece of
- trampoline code in the ".plt" section. IN_SOLIB_TRAMPOLINE evaluates
+ trampoline code in the ".plt" section. IN_SOLIB_CALL_TRAMPOLINE evaluates
to nonzero if we are current stopped in one of these. */
-#ifndef IN_SOLIB_TRAMPOLINE
-#define IN_SOLIB_TRAMPOLINE(pc,name) 0
+
+#ifndef IN_SOLIB_CALL_TRAMPOLINE
+#define IN_SOLIB_CALL_TRAMPOLINE(pc,name) 0
+#endif
+
+/* In some shared library schemes, the return path from a shared library
+ call may need to go through a trampoline too. */
+
+#ifndef IN_SOLIB_RETURN_TRAMPOLINE
+#define IN_SOLIB_RETURN_TRAMPOLINE(pc,name) 0
#endif
/* On some systems, the PC may be left pointing at an instruction that won't
void
start_remote ()
{
+ init_thread_list ();
init_wait_for_inferior ();
clear_proceed_status ();
stop_soon_quietly = 1;
stop_signal = w.value.sig;
target_terminal_ours (); /* Must do this before mourn anyway */
annotate_signalled ();
+
+ /* This looks pretty bogus to me. Doesn't TARGET_WAITKIND_SIGNALLED
+ mean it is already dead? This has been here since GDB 2.8, so
+ perhaps it means rms didn't understand unix waitstatuses?
+ For the moment I'm just kludging around this in remote.c
+ rather than trying to change it here --kingdon, 5 Dec 1994. */
target_kill (); /* kill mourns as well */
+
printf_filtered ("\nProgram terminated with signal ");
annotate_signal_name ();
printf_filtered ("%s", target_signal_to_name (stop_signal));
call. I'm not completely sure this is necessary now that we
have the above checks with stop_func_start (and now that
find_pc_partial_function is pickier). */
- || IN_SOLIB_TRAMPOLINE (stop_pc, stop_func_name)
+ || IN_SOLIB_CALL_TRAMPOLINE (stop_pc, stop_func_name)
/* If none of the above apply, it is a jump within a function,
or a return from a subroutine. The other case is longjmp,
break;
}
+ /* If we're in the return path from a shared library trampoline,
+ we want to proceed through the trampoline when stepping. */
+ if (IN_SOLIB_RETURN_TRAMPOLINE(stop_pc, stop_func_name))
+ {
+ CORE_ADDR tmp;
+
+ /* Determine where this trampoline returns. */
+ tmp = SKIP_TRAMPOLINE_CODE (stop_pc);
+
+ /* Only proceed through if we know where it's going. */
+ if (tmp)
+ {
+ /* And put the step-breakpoint there and go until there. */
+ struct symtab_and_line sr_sal;
+
+ sr_sal.pc = tmp;
+ sr_sal.symtab = NULL;
+ sr_sal.line = 0;
+ /* Do not specify what the fp should be when we stop
+ since on some machines the prologue
+ is where the new fp value is established. */
+ step_resume_breakpoint =
+ set_momentary_breakpoint (sr_sal, NULL, bp_step_resume);
+ if (breakpoints_inserted)
+ insert_breakpoints ();
+
+ /* Restart without fiddling with the step ranges or
+ other state. */
+ goto keep_going;
+ }
+ }
+
if (sal.line == 0)
{
/* We have no line number information. That means to stop
}
struct restore_selected_frame_args {
- FRAME_ADDR frame_address;
+ CORE_ADDR frame_address;
int level;
};
restore_selected_frame_args * (declared as char * for catch_errors)
telling us what frame to restore. Returns 1 for success, or 0 for
failure. An error message will have been printed on error. */
+
static int
restore_selected_frame (args)
char *args;
{
struct restore_selected_frame_args *fr =
(struct restore_selected_frame_args *) args;
- FRAME fid;
+ struct frame_info *frame;
int level = fr->level;
- fid = find_relative_frame (get_current_frame (), &level);
+ frame = find_relative_frame (get_current_frame (), &level);
/* If inf_status->selected_frame_address is NULL, there was no
previously selected frame. */
- if (fid == 0 ||
- FRAME_FP (fid) != fr->frame_address ||
+ if (frame == NULL ||
+ FRAME_FP (frame) != fr->frame_address ||
level != 0)
{
warning ("Unable to restore previously selected frame.\n");
return 0;
}
- select_frame (fid, fr->level);
+ select_frame (frame, fr->level);
return(1);
}
- - if CSUM is incorrect
<data> is as follows:
- All values are encoded in ascii hex digits.
+ Most values are encoded in ascii hex digits. Signal numbers are according
+ to the numbering in target.h.
Request Packet
+ set thread Hct... Set thread for subsequent operations.
+ c = 'c' for thread used in step and
+ continue; t... can be -1 for all
+ threads.
+ c = 'g' for thread used in other
+ operations. If zero, pick a thread,
+ any thread.
+ reply OK for success
+ ENN for an error.
+
read registers g
reply XX....X Each byte of register data
is described by two hex digits.
where only part of the data was
written).
- cont cAA..AA AA..AA is address to resume
+ continue cAA..AA AA..AA is address to resume
If AA..AA is omitted,
resume at same address.
If AA..AA is omitted,
resume at same address.
+ continue with Csig;AA Continue with signal sig (hex signal
+ signal number).
+
+ step with Ssig;AA Like 'C' but step not continue.
+ signal
+
last signal ? Reply the current reason for stopping.
This is the same reply as is generated
for step or cont : SAA where AA is the
There is no immediate reply to step or cont.
The reply comes when the machine stops.
- It is SAA AA is the "signal number"
+ It is SAA AA is the signal number.
- or... TAAn...:r...;n:r...;n...:r...;
+ or... TAAn...:r...;n...:r...;n...:r...;
AA = signal number
- n... = register number
- r... = register contents
+ n... = register number (hex)
+ r... = register contents
+ n... = `thread'
+ r... = thread process ID. This is
+ a hex integer.
+ n... = other string not starting
+ with valid hex digit.
+ gdb should ignore this n,r pair
+ and go on to the next. This way
+ we can extend the protocol.
or... WAA The process exited, and AA is
the exit status. This is only
applicable for certains sorts of
targets.
+ or... XAA The process terminated with signal
+ AA.
+ or... Otext Send text to stdout. This can happen
+ at any time while the program is
+ running and the debugger should
+ continue to wait for 'W', 'T', etc.
+
kill request k
toggle debug d toggle debug flag (see 386 & 68k stubs)
general set QXXXX=yyyy Set value of XXXX to yyyy.
query sect offs qOffsets Get section offsets. Reply is
Text=xxx;Data=yyy;Bss=zzz
- console output Otext Send text to stdout. Only comes from
- remote target.
Responses can be run-length encoded to save space. A '*' means that
the next character is an ASCII encoding giving a repeat count which
static void
getpkt PARAMS ((char *buf, int forever));
-static void
+static int
putpkt PARAMS ((char *buf));
static void
doesn't support 'P', the only consequence is some unnecessary traffic. */
static int stub_supports_P = 1;
+\f
+/* These are the threads which we last sent to the remote system. -1 for all
+ or -2 for not sent yet. */
+int general_thread;
+int cont_thread;
+
+static void
+set_thread (th, gen)
+ int th;
+ int gen;
+{
+ char buf[PBUFSIZ];
+ int state = gen ? general_thread : cont_thread;
+ if (state == th)
+ return;
+ buf[0] = 'H';
+ buf[1] = gen ? 'g' : 'c';
+ if (th == 42000)
+ {
+ buf[2] = '0';
+ buf[3] = '\0';
+ }
+ else if (th < 0)
+ sprintf (&buf[2], "-%x", -th);
+ else
+ sprintf (&buf[2], "%x", th);
+ putpkt (buf);
+ getpkt (buf, 0);
+ if (gen)
+ general_thread = th;
+ else
+ cont_thread = th;
+}
\f
/* Clean up connection to a remote debugger. */
SERIAL_WRITE (remote_desc, "+", 1);
+ /* Let the stub know that we want it to return the thread. */
+ set_thread (-1, 0);
+
get_offsets (); /* Get text, data & bss offsets */
putpkt ("?"); /* initiate a query from remote machine */
stub to another, we can (if the target is closed and reopened) cope. */
stub_supports_P = 1;
+ general_thread = -2;
+ cont_thread = -2;
+
/* Without this, some commands which require an active target (such as kill)
won't work. This variable serves (at least) double duty as both the pid
of the target process (if it has such), and as a flag indicating that a
\f
/* Tell the remote machine to resume. */
+static enum target_signal last_sent_signal = TARGET_SIGNAL_0;
+int last_sent_step;
+
static void
remote_resume (pid, step, siggnal)
int pid, step;
{
char buf[PBUFSIZ];
- if (siggnal)
- {
- target_terminal_ours_for_output ();
- printf_filtered
- ("Can't send signals to a remote system. %s not sent.\n",
- target_signal_to_name (siggnal));
- target_terminal_inferior ();
- }
+ if (pid == -1)
+ set_thread (inferior_pid, 0);
+ else
+ set_thread (pid, 0);
dcache_flush (remote_dcache);
- strcpy (buf, step ? "s": "c");
+ last_sent_signal = siggnal;
+ last_sent_step = step;
+
+ if (siggnal != TARGET_SIGNAL_0)
+ {
+ buf[0] = step ? 'S' : 'C';
+ buf[1] = tohex (((int)siggnal >> 4) & 0xf);
+ buf[2] = tohex ((int)siggnal & 0xf);
+ buf[3] = '\0';
+ }
+ else
+ strcpy (buf, step ? "s": "c");
putpkt (buf);
}
target_terminal_inferior ();
}
+/* If nonzero, ignore the next kill. */
+int kill_kludge;
+
/* Wait until the remote machine stops, then return,
storing status in STATUS just as `wait' would.
Returns "pid" (though it's not clear what, if anything, that
struct target_waitstatus *status;
{
unsigned char buf[PBUFSIZ];
+ int thread_num = -1;
status->kind = TARGET_WAITKIND_EXITED;
status->value.integer = 0;
regno = strtol (p, &p1, 16); /* Read the register number */
if (p1 == p)
- warning ("Remote sent badly formed register number: %s\nPacket: '%s'\n",
- p1, buf);
-
- p = p1;
-
- if (*p++ != ':')
- warning ("Malformed packet (missing colon): %s\nPacket: '%s'\n",
- p, buf);
-
- if (regno >= NUM_REGS)
- warning ("Remote sent bad register number %d: %s\nPacket: '%s'\n",
- regno, p, buf);
-
- for (i = 0; i < REGISTER_RAW_SIZE (regno); i++)
{
- if (p[0] == 0 || p[1] == 0)
- warning ("Remote reply is too short: %s", buf);
- regs[i] = fromhex (p[0]) * 16 + fromhex (p[1]);
- p += 2;
+ p1 = (unsigned char *) strchr (p, ':');
+ if (p1 == NULL)
+ warning ("Malformed packet (missing colon): %s\n\
+Packet: '%s'\n",
+ p, buf);
+ if (strncmp (p, "thread", p1 - p) == 0)
+ {
+ char *p2;
+ thread_num = strtol (++p1, &p, 16);
+ }
+ }
+ else
+ {
+ p = p1;
+
+ if (*p++ != ':')
+ warning ("Malformed packet (missing colon): %s\n\
+Packet: '%s'\n",
+ p, buf);
+
+ if (regno >= NUM_REGS)
+ warning ("Remote sent bad register number %d: %s\n\
+Packet: '%s'\n",
+ regno, p, buf);
+
+ for (i = 0; i < REGISTER_RAW_SIZE (regno); i++)
+ {
+ if (p[0] == 0 || p[1] == 0)
+ warning ("Remote reply is too short: %s", buf);
+ regs[i] = fromhex (p[0]) * 16 + fromhex (p[1]);
+ p += 2;
+ }
+ supply_register (regno, regs);
}
if (*p++ != ';')
warning ("Remote register badly formatted: %s", buf);
-
- supply_register (regno, regs);
}
}
/* fall through */
status->value.sig = (enum target_signal)
(((fromhex (buf[1])) << 4) + (fromhex (buf[2])));
- return inferior_pid;
+ goto got_status;
case 'W': /* Target exited */
{
/* The remote process exited. */
status->kind = TARGET_WAITKIND_EXITED;
status->value.integer = (fromhex (buf[1]) << 4) + fromhex (buf[2]);
- return inferior_pid;
+ goto got_status;
}
+ case 'X':
+ status->kind = TARGET_WAITKIND_SIGNALLED;
+ status->value.sig = (enum target_signal)
+ (((fromhex (buf[1])) << 4) + (fromhex (buf[2])));
+ kill_kludge = 1;
+
+ goto got_status;
case 'O': /* Console output */
fputs_filtered ((char *)(buf + 1), gdb_stdout);
continue;
+ case '\0':
+ if (last_sent_signal != TARGET_SIGNAL_0)
+ {
+ /* Zero length reply means that we tried 'S' or 'C' and
+ the remote system doesn't support it. */
+ target_terminal_ours_for_output ();
+ printf_filtered
+ ("Can't send signals to this remote system. %s not sent.\n",
+ target_signal_to_name (last_sent_signal));
+ last_sent_signal = TARGET_SIGNAL_0;
+ target_terminal_inferior ();
+
+ strcpy (buf, last_sent_step ? 's' : 'c');
+ putpkt (buf);
+ continue;
+ }
+ /* else fallthrough */
default:
warning ("Invalid remote reply: %s", buf);
continue;
}
}
+ got_status:
+ if (thread_num != -1)
+ {
+ /* Initial thread value can only be acquired via wait, so deal with
+ this marker which is used before the first thread value is
+ acquired. */
+ if (inferior_pid == 42000)
+ {
+ inferior_pid = thread_num;
+ add_thread (inferior_pid);
+ }
+ return thread_num;
+ }
+ return inferior_pid;
}
/* Number of bytes of registers this stub implements. */
char *p;
char regs[REGISTER_BYTES];
+ set_thread (inferior_pid, 1);
+
sprintf (buf, "g");
remote_send (buf);
int i;
char *p;
+ set_thread (inferior_pid, 1);
+
if (regno >= 0 && stub_supports_P)
{
/* Try storing a single register. */
int bytes_xferred;
int total_xferred = 0;
+ set_thread (inferior_pid, 1);
+
while (len > 0)
{
if (len > MAXBUFBYTES)
/* Send a packet to the remote machine, with error checking.
The data of the packet is in BUF. */
-static void
+static int
putpkt (buf)
char *buf;
{
case '+':
if (remote_debug)
printf_unfiltered("Ack\n");
- return;
+ return 1;
case SERIAL_TIMEOUT:
break; /* Retransmit buffer */
case '$':
static void
remote_kill ()
{
- putpkt ("k");
+ /* For some mysterious reason, wait_for_inferior calls kill instead of
+ mourn after it gets TARGET_WAITKIND_SIGNALLED. Work around it. */
+ if (kill_kludge)
+ {
+ kill_kludge = 0;
+ target_mourn_inferior ();
+ return;
+ }
+
+ /* Use catch_errors so the user can quit from gdb even when we aren't on
+ speaking terms with the remote system. */
+ catch_errors (putpkt, "k", "", RETURN_MASK_ERROR);
+
/* Don't wait for it to die. I'm not really sure it matters whether
we do or not. For the existing stubs, kill is a noop. */
target_mourn_inferior ();
struct thread_info *tp;
int current_pid = inferior_pid;
+ /* Avoid coredumps which would happen if we tried to access a NULL
+ selected_frame. */
+ if (!target_has_stack) error ("No stack.");
+
for (tp = thread_list; tp; tp = tp->next)
{
- if (target_has_execution
+ /* FIXME: need to figure out a way to do this for remote too,
+ or else the print_stack_frame below will fail with a bogus
+ thread ID. */
+ if (!STREQ (current_target.to_shortname, "remote")
+ && target_has_execution
&& kill (tp->pid, 0) == -1)
{
tp->pid = -1; /* Mark it as dead */
projects / binutils-gdb.git / commitdiff