* configure.host (xscale*): Don't handle target.
* configure.tgt (thumb*-*-* | strongarm*-*-* | xscale-*-*): Don't
handle targets.
gdb/gdbserver:
* README: Don't mention xscale*-*-linux*.
* configure.srv (xscale*-*-linux*): Don't handle target.
gdb/testsuite:
* gdb.base/a2-run.exp (strongarm-*-coff): Don't handle target.
* gdb.base/float.exp (xscale*-*-*, strongarm*-*-*): Don't handle
targets.
* gdb.base/long_long.exp (xscale*-*-*, strongarm*-*-*): Don't
handle targets.
sim:
* configure.tgt (thumb*-*-* | strongarm*-*-* | xscale-*-*): Don't
handle targets.
* configure: Regenerate.
sim/testsuite:
* configure: Regenerate.
* sim/arm/allinsn.exp (xscale*-*-*): Don't handle target.
* sim/arm/misc.exp (thumb*-*-*, xscale*-*-*): Don't handle
targets.
* sim/arm/iwmmxt/iwmmxt.exp: Test for arm*-*-* instead of
xscale*-*-*.
* sim/arm/thumb/allthumb.exp (thumb*-*-*): Don't handle target.
* sim/arm/xscale/xscale.exp: Test for arm*-*-* instead of
xscale*-*-*.
+2011-05-04 Joseph Myers <joseph@codesourcery.com>
+
+ * configure.host (xscale*): Don't handle target.
+ * configure.tgt (thumb*-*-* | strongarm*-*-* | xscale-*-*): Don't
+ handle targets.
+
2011-05-04 Yao Qi <yao@codesourcery.com>
* gdb_wait.h: remove WAITTYPE and WCOREDUMP.
s390*) gdb_host_cpu=s390 ;;
sh*) gdb_host_cpu=sh ;;
x86_64*) gdb_host_cpu=i386 ;;
-xscale*) gdb_host_cpu=arm ;;
m32r*) gdb_host_cpu=m32r ;;
xtensa*) gdb_host_cpu=xtensa ;;
*) gdb_host_cpu=$host_cpu ;;
# Target: SymbianOS/arm
gdb_target_obs="arm-tdep.o solib-target.o arm-symbian-tdep.o"
;;
-arm*-*-* | thumb*-*-* | strongarm*-*-* | xscale-*-*)
+arm*-*-*)
# Target: ARM embedded system
gdb_target_obs="arm-tdep.o"
gdb_sim=../sim/arm/libsim.a
+2011-05-04 Joseph Myers <joseph@codesourcery.com>
+
+ * README: Don't mention xscale*-*-linux*.
+ * configure.srv (xscale*-*-linux*): Don't handle target.
+
2011-04-27 Nathan Froyd <froydnj@codesourcery.com>
* linux-x86-low.c (amd64_emit_const): Call memcpy instead of
sh-*-linux*
spu*-*-*
x86_64-*-linux*
- xscale*-*-linux*
Configuring GDBserver you should specify the same machine for host and
target (which are the machine that GDBserver is going to run on. This
srv_mingw=yes
;;
- xscale*-*-linux*) srv_regobj=reg-arm.o
- srv_tgtobj="linux-low.o linux-arm-low.o"
- srv_linux_usrregs=yes
- srv_linux_thread_db=yes
- ;;
xtensa*-*-linux*) srv_regobj=reg-xtensa.o
srv_tgtobj="linux-low.o linux-xtensa-low.o"
srv_linux_regsets=yes
+2011-05-04 Joseph Myers <joseph@codesourcery.com>
+
+ * gdb.base/a2-run.exp (strongarm-*-coff): Don't handle target.
+ * gdb.base/float.exp (xscale*-*-*, strongarm*-*-*): Don't handle
+ targets.
+ * gdb.base/long_long.exp (xscale*-*-*, strongarm*-*-*): Don't
+ handle targets.
+
2011-05-04 Jan Kratochvil <jan.kratochvil@redhat.com>
* gdb.base/completion.exp (complete help info wat): Rename to ...
verbose "Timeout is now $timeout seconds" 2
gdb_expect -re "$gdb_prompt $" {}
} else {
- setup_xfail "mips-idt-*" "arm-*-coff strongarm-*-coff"
+ setup_xfail "mips-idt-*" "arm-*-coff"
gdb_run_cmd 5
gdb_expect {
-re ".*120.*$gdb_prompt $"\
verbose "Timeout is now $timeout seconds" 2
gdb_expect -re "$gdb_prompt $" {}
} else {
- setup_xfail "arm-*-coff strongarm-*-coff"
+ setup_xfail "arm-*-coff"
gdb_expect {
-re ".*120.*$gdb_prompt $"\
{ pass "run \"$testfile\" again with same args" }
verbose "Timeout is now $timeout seconds" 2
gdb_expect -re "$gdb_prompt $" {}
} else {
- setup_xfail "arm-*-coff strongarm-*-coff"
+ setup_xfail "arm-*-coff"
gdb_expect {
-re ".*720.*$gdb_prompt $" {
pass "run \"$testfile\" again after setting args"
if { [istarget "alpha*-*-*"] } then {
gdb_test "info float" "f0.*" "info float"
-} elseif { [istarget "arm*-*-*"] || \
- [istarget "xscale*-*-*"] || \
- [istarget "strongarm*-*-*"] } then {
+} elseif { [istarget "arm*-*-*"] } then {
gdb_test_multiple "info float" "info float" {
-re "Software FPU type.*mask:.*flags:.*$gdb_prompt $" {
pass "info float (FPA)"
# words swapped in big endian format.
# EABI targets default to natural-endian VFP format.
- if { ([istarget "arm*-*-*"] || \
- [istarget "xscale*-*-*"] || \
- [istarget "strongarm*-*-*"]) \
+ if { ([istarget "arm*-*-*"]) \
&& !([istarget "*-*-*eabi"] || \
[istarget "*-*-mingw32ce*"] || \
[istarget "*-*-openbsd*"] || \
+2011-05-04 Joseph Myers <joseph@codesourcery.com>
+
+ * configure.tgt (thumb*-*-* | strongarm*-*-* | xscale-*-*): Don't
+ handle targets.
+ * configure: Regenerate.
+
2011-03-05 Mike Frysinger <vapier@gentoo.org>
* MAINTAINERS: Add bfin entry.
sim_igen=no
sim_arch=
case "${target}" in
- arm*-*-* | thumb*-*-* | strongarm*-*-* | xscale-*-*)
+ arm*-*-*)
sim_arch=arm
sim_igen=no
sim_arch=
case "${target}" in
- arm*-*-* | thumb*-*-* | strongarm*-*-* | xscale-*-*)
+ arm*-*-*)
SIM_ARCH(arm)
sim_testsuite=yes
;;
+2011-05-04 Joseph Myers <joseph@codesourcery.com>
+
+ * configure: Regenerate.
+ * sim/arm/allinsn.exp (xscale*-*-*): Don't handle target.
+ * sim/arm/misc.exp (thumb*-*-*, xscale*-*-*): Don't handle
+ targets.
+ * sim/arm/iwmmxt/iwmmxt.exp: Test for arm*-*-* instead of
+ xscale*-*-*.
+ * sim/arm/thumb/allthumb.exp (thumb*-*-*): Don't handle target.
+ * sim/arm/xscale/xscale.exp: Test for arm*-*-* instead of
+ xscale*-*-*.
+
2010-10-07 Hans-Peter Nilsson <hp@axis.com>
* sim/cris/c/seek3.c, sim/cris/c/seek4.c: New tests.
sim_igen=no
sim_arch=
case "${target}" in
- arm*-*-* | thumb*-*-* | strongarm*-*-* | xscale-*-*)
+ arm*-*-*)
sim_arch=arm
sim_testsuite=yes
;;
avr*-*-*)
sim_arch=avr
;;
+ bfin-*-*)
+ sim_arch=bfin
+ ;;
cr16*-*-*)
sim_arch=cr16
sim_testsuite=yes
# ARM simulator testsuite.
-if { [istarget arm*-*-*] || [istarget xscale*-*-*] } {
+if { [istarget arm*-*-*] } {
# load support procs (none yet)
# load_lib cgen.exp
# Intel(r) Wireless MMX(tm) technology simulator testsuite.
-if { [istarget xscale*-*-*] } {
+if { [istarget arm*-*-*] } {
# load support procs (none yet)
# load_lib cgen.exp
# Miscellaneous ARM simulator testcases
-if { [istarget arm*-*-*] || [istarget thumb*-*-*] || [istarget xscale*-*-*] } {
+if { [istarget arm*-*-*] } {
# load support procs
# load_lib cgen.exp
# ARM simulator testsuite.
-if { [istarget arm*-*-*]
- || [istarget thumb*-*-*] } {
+if { [istarget arm*-*-*] } {
# load support procs (none yet)
# load_lib cgen.exp
# XSCALE simulator testsuite.
-if { [istarget xscale*-*-*] } {
+if { [istarget arm*-*-*] } {
# load support procs (none yet)
# load_lib cgen.exp