* Introduction
-Mesa 4.1 features a driver for the BeOS. The driver implements
-a clone of the BGLView class. This class, derived from BView, allows
-OpenGL rendering into a BeOS window.
-The 4.1 BeOS driver is an update of Brian Paul's BeOS driver released in Mesa 3.1.
+Brian Paul added in Mesa 3.1 a driver for BeOS R4.5 operating system.
+This driver implements a clone of the BGLView class. This class, derived from BView, allows
+OpenGL rendering into any BeOS window.
+His driver was updated in Mesa 4.1 by Philippe Houdoin,
+who's maintaining this driver since.
Any application which uses the BGLView should be able to use Mesa
instead of Be's OpenGL without changing any code.
is considerably faster.
-
* Source Code
-The source code for the driver is in Mesa-4.1/src/BeOS/ directory.
+The source code for the driver is in src/mesa/drivers/beos/ directory.
It's not 100% finished at this time but many GLUT-based demos are
working. No optimizations have been made at this time.
- gcc version 2.95.3 for BeOS
You can find it here: http://www.bebits.com/app/2157
-Move to the Mesa-4.x src sub-directory and then type "make -f Makefile.BeOS-R5".
+Move to the src/mesa sub-directory and then type "make -f Makefile.BeOS".
When it finishes the Mesa based libGL.so library for
-BeOS will be in the Mesa-4.x/src/obj.{x86|ppc}/ directory.
+BeOS will be in the src/mesa/src/obj.{x86|ppc}/ directory.
To install it as Be's default libGL.so replacement, put it in your
-/boot/home/config/lib/ directory. All your GL/GLUTapps will use
+/boot/home/config/lib/ directory. All your GL/GLUT apps will use
the Mesa based then.
By default, it build a non-debug version library.
The x86 (MMX, SSE and 3DNOW) optimizations are also supported for x86 target.
-Sorry, Mesa don't have ppc (Altivec) optimizations yet.
+For PowerPC BeOS flavor, sorry, Mesa don't have ppc (Altivec) optimizations yet.
* Example Programs
-Look in the Mesa-4.x/BeOS/ directory for one or two BGLView demo
+Look in the progs/beos/ directory for one or two BGLView demo
programs. They should have been compiled along with the Mesa
library.
if interested. Ideally, the 3Dfx/Glide support should be updated to
work with the new Mesa 3.1 BGLView implementation.
-The Glide library hasn't been updated for BeOS R4, to my knowledge, as
+The Glide library hasn't been updated for BeOS R4 and newer, to my knowledge, as
of February, 1999.
----------------------------------------------------------------------
-$Id: README.BEOS,v 1.7 2002/09/19 16:19:44 brianp Exp $
+$Id: README.BEOS,v 1.8 2003/12/13 01:26:14 brianp Exp $
# if two source files with the same name (source.c or source.cpp)
# are included from different directories. Also note that spaces
# in folder names do not work well with this makefile.
-SRCS= glut_util.cpp glutBlocker.cpp glutInit.cpp glutWindow.cpp \
-glutEvent.cpp glutCallback.cpp glutOverlay.cpp glutGet.cpp glutColor.cpp \
-glutCursor.cpp glutMenu.cpp glutDstr.cpp glut_bitmap.cpp glut_bwidth.cpp \
-glut_8x13.cpp glut_9x15.cpp glut_hel10.cpp glut_hel12.cpp glut_hel18.cpp \
-glut_tr10.cpp glut_tr24.cpp glut_mroman.cpp glut_roman.cpp glut_stroke.cpp \
-glut_swidth.cpp glut_shapes.cpp glut_teapot.cpp beos_x11.cpp
+SRCS= \
+ glut_util.cpp \
+ glutBlocker.cpp \
+ glutInit.cpp \
+ glutWindow.cpp \
+ glutEvent.cpp \
+ glutCallback.cpp \
+ glutOverlay.cpp \
+ glutGet.cpp \
+ glutColor.cpp \
+ glutCursor.cpp \
+ glutMenu.cpp \
+ glutDstr.cpp \
+ glut_bitmap.cpp \
+ glut_bwidth.cpp \
+ glut_8x13.cpp \
+ glut_9x15.cpp \
+ glut_hel10.cpp \
+ glut_hel12.cpp \
+ glut_hel18.cpp \
+ glut_tr10.cpp \
+ glut_tr24.cpp \
+ glut_mroman.cpp \
+ glut_roman.cpp \
+ glut_stroke.cpp \
+ glut_swidth.cpp \
+ glut_shapes.cpp \
+ glut_teapot.cpp \
+ beos_x11.cpp
# specify the resource files to use
# full path or a relative path to the resource file can be used.
# additional paths to look for system headers
# thes use the form: #include <header>
# source file directories are NOT auto-included here
-SYSTEM_INCLUDE_PATHS = ../../include /boot/develop/headers/be/opengl
+SYSTEM_INCLUDE_PATHS = ../../../include /boot/develop/headers/be/opengl
# additional paths to look for local headers
# thes use the form: #include "header"
--- /dev/null
+# Mesa 3-D graphics library
+# Version: 5.1
+#
+# Copyright (C) 1995-2003 Brian Paul All Rights Reserved.
+#
+# Permission is hereby granted, free of charge, to any person obtaining a
+# copy of this software and associated documentation files (the "Software"),
+# to deal in the Software without restriction, including without limitation
+# the rights to use, copy, modify, merge, publish, distribute, sublicense,
+# and/or sell copies of the Software, and to permit persons to whom the
+# Software is furnished to do so, subject to the following conditions:
+#
+# The above copyright notice and this permission notice shall be included
+# in all copies or substantial portions of the Software.
+#
+# THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS
+# OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+# FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
+# BRIAN PAUL BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN
+# AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
+# CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.
+#
+# BeOS driver makefile v1.0 for Mesa 5.1.x
+#
+# Copyright (C) 2002-2003 - Philippe Houdoin
+# Email : philippe.houdoin@free.fr
+# Web : http://philippe.houdoin.free.fr/phil/beos/index-en.html
+#
+# -------------------------------------------------------------------
+
+## BeOS Generic Makefile v2.0 ##
+
+## Fill in this file to specify the project being created, and the referenced
+## makefile-engine will do all of the hard work for you. This handles both
+## Intel and PowerPC builds of the BeOS.
+
+## Application Specific Settings ---------------------------------------------
+
+# specify the name of the binary
+NAME= libGL.so
+
+# specify the type of binary
+# APP: Application
+# SHARED: Shared library or add-on
+# STATIC: Static library archive
+# DRIVER: Kernel Driver
+TYPE= SHARED
+
+# specify the source files to use
+# full paths or paths relative to the makefile can be included
+# all files, regardless of directory, will have their object
+# files created in the common object directory.
+# Note that this means this makefile will not work correctly
+# if two source files with the same name (source.c or source.cpp)
+# are included from different directories. Also note that spaces
+# in folder names do not work well with this makefile.
+
+
+include sources
+
+
+BEOS_DRIVER_SOURCES = \
+ drivers/beos/GLView.cpp
+
+MESA_DEFINES =
+ASM_SOURCES =
+
+# To use GAS assembler, uncomment this line instead:
+MESA_DEFINES += GNU_ASSEMBLER
+# To use NASM assembler, uncomment this line instead:
+# MESA_DEFINES += NASM_ASSEMBLER
+# To build a DEBUG version of Mesa, uncomment this line instead:
+# MESA_DEFINES += DEBUG
+
+# x86-optimized code
+MACHINE=$(shell uname -m)
+ifeq ($(MACHINE), BePC)
+ MESA_DEFINES += USE_X86_ASM USE_SSE_ASM USE_MMX_ASM
+ MESA_DEFINES += USE_3DNOW_ASM
+ ASM_SOURCES = $(X86_SOURCES)
+else
+ # No assembly optimization for PowerPC...
+ # HAVE_ALTIVEC=1
+endif
+
+# FIXME: SI-GLU version support currently broken
+# USE_SI_GLU=1
+ifdef USE_SI_GLU
+ GLU_SOURCES = \
+ ../si-glu/libutil/error.c \
+ ../si-glu/libutil/glue.c \
+ ../si-glu/libutil/mipmap.c \
+ ../si-glu/libutil/project.c \
+ ../si-glu/libutil/quad.c \
+ ../si-glu/libutil/registry.c \
+ ../si-glu/libtess/dict.c \
+ ../si-glu/libtess/geom.c \
+ ../si-glu/libtess/memalloc.c \
+ ../si-glu/libtess/mesh.c \
+ ../si-glu/libtess/normal.c \
+ ../si-glu/libtess/priorityq.c \
+ ../si-glu/libtess/render.c \
+ ../si-glu/libtess/sweep.c \
+ ../si-glu/libtess/tess.c \
+ ../si-glu/libtess/tessmono.c \
+ ../si-glu/libnurbs/interface/bezierEval.cc \
+ ../si-glu/libnurbs/interface/bezierPatch.cc \
+ ../si-glu/libnurbs/interface/bezierPatchMesh.cc \
+ ../si-glu/libnurbs/interface/glcurveval.cc \
+ ../si-glu/libnurbs/interface/glinterface.cc \
+ ../si-glu/libnurbs/interface/glrenderer.cc \
+ ../si-glu/libnurbs/interface/glsurfeval.cc \
+ ../si-glu/libnurbs/interface/incurveeval.cc \
+ ../si-glu/libnurbs/interface/insurfeval.cc \
+ ../si-glu/libnurbs/internals/arc.cc \
+ ../si-glu/libnurbs/internals/arcsorter.cc \
+ ../si-glu/libnurbs/internals/arctess.cc \
+ ../si-glu/libnurbs/internals/backend.cc \
+ ../si-glu/libnurbs/internals/basiccrveval.cc \
+ ../si-glu/libnurbs/internals/basicsurfeval.cc \
+ ../si-glu/libnurbs/internals/bin.cc \
+ ../si-glu/libnurbs/internals/bufpool.cc \
+ ../si-glu/libnurbs/internals/cachingeval.cc \
+ ../si-glu/libnurbs/internals/ccw.cc \
+ ../si-glu/libnurbs/internals/coveandtiler.cc \
+ ../si-glu/libnurbs/internals/curve.cc \
+ ../si-glu/libnurbs/internals/curvelist.cc \
+ ../si-glu/libnurbs/internals/curvesub.cc \
+ ../si-glu/libnurbs/internals/dataTransform.cc \
+ ../si-glu/libnurbs/internals/displaylist.cc \
+ ../si-glu/libnurbs/internals/flist.cc \
+ ../si-glu/libnurbs/internals/flistsorter.cc \
+ ../si-glu/libnurbs/internals/hull.cc \
+ ../si-glu/libnurbs/internals/intersect.cc \
+ ../si-glu/libnurbs/internals/knotvector.cc \
+ ../si-glu/libnurbs/internals/mapdesc.cc \
+ ../si-glu/libnurbs/internals/mapdescv.cc \
+ ../si-glu/libnurbs/internals/maplist.cc \
+ ../si-glu/libnurbs/internals/mesher.cc \
+ ../si-glu/libnurbs/internals/monoTriangulationBackend.cc \
+ ../si-glu/libnurbs/internals/monotonizer.cc \
+ ../si-glu/libnurbs/internals/mycode.cc \
+ ../si-glu/libnurbs/internals/nurbsinterfac.cc \
+ ../si-glu/libnurbs/internals/nurbstess.cc \
+ ../si-glu/libnurbs/internals/patch.cc \
+ ../si-glu/libnurbs/internals/patchlist.cc \
+ ../si-glu/libnurbs/internals/quilt.cc \
+ ../si-glu/libnurbs/internals/reader.cc \
+ ../si-glu/libnurbs/internals/renderhints.cc \
+ ../si-glu/libnurbs/internals/slicer.cc \
+ ../si-glu/libnurbs/internals/sorter.cc \
+ ../si-glu/libnurbs/internals/splitarcs.cc \
+ ../si-glu/libnurbs/internals/subdivider.cc \
+ ../si-glu/libnurbs/internals/tobezier.cc \
+ ../si-glu/libnurbs/internals/trimline.cc \
+ ../si-glu/libnurbs/internals/trimregion.cc \
+ ../si-glu/libnurbs/internals/trimvertpool.cc \
+ ../si-glu/libnurbs/internals/uarray.cc \
+ ../si-glu/libnurbs/internals/varray.cc \
+ ../si-glu/libnurbs/nurbtess/directedLine.cc \
+ ../si-glu/libnurbs/nurbtess/gridWrap.cc \
+ ../si-glu/libnurbs/nurbtess/monoChain.cc \
+ ../si-glu/libnurbs/nurbtess/monoPolyPart.cc \
+ ../si-glu/libnurbs/nurbtess/monoTriangulation.cc \
+ ../si-glu/libnurbs/nurbtess/partitionX.cc \
+ ../si-glu/libnurbs/nurbtess/partitionY.cc \
+ ../si-glu/libnurbs/nurbtess/polyDBG.cc \
+ ../si-glu/libnurbs/nurbtess/polyUtil.cc \
+ ../si-glu/libnurbs/nurbtess/primitiveStream.cc \
+ ../si-glu/libnurbs/nurbtess/quicksort.cc \
+ ../si-glu/libnurbs/nurbtess/rectBlock.cc \
+ ../si-glu/libnurbs/nurbtess/sampleComp.cc \
+ ../si-glu/libnurbs/nurbtess/sampleCompBot.cc \
+ ../si-glu/libnurbs/nurbtess/sampleCompRight.cc \
+ ../si-glu/libnurbs/nurbtess/sampleCompTop.cc \
+ ../si-glu/libnurbs/nurbtess/sampleMonoPoly.cc \
+ ../si-glu/libnurbs/nurbtess/sampledLine.cc \
+ ../si-glu/libnurbs/nurbtess/searchTree.cc
+else
+ GLU_SOURCES = \
+ ../glu/mesa/glu.c \
+ ../glu/mesa/mipmap.c \
+ ../glu/mesa/project.c \
+ ../glu/mesa/quadric.c \
+ ../glu/mesa/tess.c \
+ ../glu/mesa/tesselat.c \
+ ../glu/mesa/polytest.c \
+ ../glu/mesa/nurbs.c \
+ ../glu/mesa/nurbscrv.c \
+ ../glu/mesa/nurbssrf.c \
+ ../glu/mesa/nurbsutl.c
+endif
+
+MESA_SOURCES = $(CORE_SOURCES) $(ASM_SOURCES)
+
+SRCS = $(MESA_SOURCES) $(GLU_SOURCES) $(BEOS_DRIVER_SOURCES)
+
+# specify the resource files to use
+# full path or a relative path to the resource file can be used.
+RSRCS =
+
+# specify additional libraries to link against
+# there are two acceptable forms of library specifications
+# - if your library follows the naming pattern of:
+# libXXX.so or libXXX.a you can simply specify XXX
+# library: libbe.so entry: be
+#
+# - if your library does not follow the standard library
+# naming scheme you need to specify the path to the library
+# and it's name
+# library: my_lib.a entry: my_lib.a or path/my_lib.a
+LIBS = be
+
+# specify additional paths to directories following the standard
+# libXXX.so or libXXX.a naming scheme. You can specify full paths
+# or paths relative to the makefile. The paths included may not
+# be recursive, so include all of the paths where libraries can
+# be found. Directories where source files are found are
+# automatically included.
+LIBPATHS =
+
+# additional paths to look for system headers
+# thes use the form: #include <header>
+# source file directories are NOT auto-included here
+SYSTEM_INCLUDE_PATHS = ../../include
+
+ifdef USE_SI_GLU
+ SYSTEM_INCLUDE_PATHS += ../glu/sgi/include
+endif
+
+# additional paths to look for local headers
+# thes use the form: #include "header"
+# source file directories are automatically included
+LOCAL_INCLUDE_PATHS = \
+ . \
+ ./main \
+ ./glapi \
+ ./math \
+ ./transform \
+ ./swrast \
+ ./swrast_setup \
+ ./tnl \
+ ./tnl_dd
+
+# specify the level of optimization that you desire
+# NONE, SOME, FULL
+OPTIMIZE = FULL
+
+# specify any preprocessor symbols to be defined. The symbols
+# will be set to a value of 1. For example specify DEBUG if you want
+# DEBUG=1 to be set when compiling.
+DEFINES = $(MESA_DEFINES)
+
+# specify special warning levels
+# if unspecified default warnings will be used
+# NONE = suppress all warnings
+# ALL = enable all warnings
+WARNINGS = ALL
+
+# specify whether image symbols will be created
+# so that stack crawls in the debugger are meaningful
+# if TRUE symbols will be created
+SYMBOLS = TRUE
+
+# specify debug settings
+# if TRUE will allow application to be run from
+# a source-level debugger
+# DEBUGGER = TRUE
+DEBUGGER = FALSE
+
+# specify additional compiler flags for all files
+COMPILER_FLAGS =
+
+# specify additional linker flags
+LINKER_FLAGS =
+
+
+
+## include the makefile-engine
+include /boot/develop/etc/makefile-engine
+
+
+
+# x86/matypes.h include file is *generated*!
+# Rules to (re)generate it as needed:
+
+x86/common_x86_asm.S : x86/matypes.h
+
+x86/matypes.h : x86/gen_matypes.c
+ @echo "(Re-)Generating $@ ..."
+ $(CC) $< $(INCLUDES) $(CFLAGS) -o x86/gen_matypes
+ x86/gen_matypes > $@
+ rm -f x86/gen_matypes
+
+## Add NASM support for assembly code compilation...
+# $(OBJ_DIR)/%.o : %.nasm
+# nasm -f elf $(MESA_DEFINES) -o $@ $<
+
+$(OBJ_DIR)/%.o : %.S
+ gcc -c $< $(INCLUDES) $(CFLAGS) -o $@
+# gcc $(INCLUDES) $(CFLAGS) -E $< | grep -v '^$$' > $(addsuffix .nasm, $(basename $<))
+# nasm -f elf $(MESA_DEFINES) -o $@ $(addsuffix .nasm, $(basename $<))
+
-/* $Id: GLView.cpp,v 1.9 2003/03/30 15:49:01 brianp Exp $ */
+/* $Id: GLView.cpp,v 1.10 2003/12/13 01:26:14 brianp Exp $ */
/*
* Mesa 3-D graphics library
*/
-#include "glheader.h"
-
#include <assert.h>
#include <stdio.h>
extern "C" {
+#include "glheader.h"
+#include "buffers.h"
+#include "bufferobj.h"
#include "context.h"
#include "colormac.h"
#include "depth.h"
#include "extensions.h"
#include "macros.h"
#include "matrix.h"
-#include "mmath.h"
#include "mtypes.h"
#include "texformat.h"
+#include "texobj.h"
+#include "teximage.h"
#include "texstore.h"
#include "array_cache/acache.h"
#include "swrast/swrast.h"
} // extern "C"
-#include <GLView.h>
+#include "GLView.h"
// BeOS component ordering for B_RGBA32 bitmap format
#define BE_RCOMP 2
// create core context
GLcontext * ctx = _mesa_create_context(visual, NULL, md, GL_FALSE);
+ ctx->Driver.NewTextureObject = _mesa_new_texture_object;
+ ctx->Driver.DeleteTexture = _mesa_delete_texture_object;
+
+ _mesa_initialize_context(ctx, visual, NULL, md, GL_FALSE);
+
+ _mesa_enable_sw_extensions(ctx);
+ _mesa_enable_1_3_extensions(ctx);
+ _mesa_enable_1_4_extensions(ctx);
+ _mesa_enable_1_5_extensions(ctx);
+
+
// create core framebuffer
GLframebuffer * buffer = _mesa_create_framebuffer(visual,
alphaFlag
);
- _mesa_enable_sw_extensions(ctx);
- _mesa_enable_1_3_extensions(ctx);
- _mesa_enable_1_4_extensions(ctx);
-
/* Initialize the software rasterizer and helper modules.
*/
_swrast_CreateContext(ctx);
assert(md->m_glcontext == ctx );
+ // Use default TCL pipeline
+ tnl->Driver.RunPipeline = _tnl_run_pipeline;
+
ctx->Driver.GetString = MesaDriver::GetString;
ctx->Driver.UpdateState = MesaDriver::UpdateState;
- ctx->Driver.GetBufferSize = MesaDriver::GetBufferSize;
ctx->Driver.ResizeBuffers = _swrast_alloc_buffers;
+ ctx->Driver.GetBufferSize = MesaDriver::GetBufferSize;
ctx->Driver.Accum = _swrast_Accum;
ctx->Driver.Bitmap = _swrast_Bitmap;
- ctx->Driver.ClearIndex = MesaDriver::ClearIndex;
- ctx->Driver.ClearColor = MesaDriver::ClearColor;
ctx->Driver.Clear = MesaDriver::Clear;
+ // ctx->Driver.ClearIndex = MesaDriver::ClearIndex;
+ // ctx->Driver.ClearColor = MesaDriver::ClearColor;
ctx->Driver.CopyPixels = _swrast_CopyPixels;
ctx->Driver.DrawPixels = _swrast_DrawPixels;
ctx->Driver.ReadPixels = _swrast_ReadPixels;
+ ctx->Driver.DrawBuffer = _swrast_DrawBuffer;
ctx->Driver.ChooseTextureFormat = _mesa_choose_tex_format;
ctx->Driver.TexImage1D = _mesa_store_teximage1d;
ctx->Driver.TexSubImage3D = _mesa_store_texsubimage3d;
ctx->Driver.TestProxyTexImage = _mesa_test_proxy_teximage;
- ctx->Driver.CopyTexImage1D = _swrast_copy_teximage1d;
+ ctx->Driver.CompressedTexImage1D = _mesa_store_compressed_teximage1d;
+ ctx->Driver.CompressedTexImage2D = _mesa_store_compressed_teximage2d;
+ ctx->Driver.CompressedTexImage3D = _mesa_store_compressed_teximage3d;
+ ctx->Driver.CompressedTexSubImage1D = _mesa_store_compressed_texsubimage1d;
+ ctx->Driver.CompressedTexSubImage2D = _mesa_store_compressed_texsubimage2d;
+ ctx->Driver.CompressedTexSubImage3D = _mesa_store_compressed_texsubimage3d;
+
+ ctx->Driver.CopyTexImage1D = _swrast_copy_teximage1d;
ctx->Driver.CopyTexImage2D = _swrast_copy_teximage2d;
ctx->Driver.CopyTexSubImage1D = _swrast_copy_texsubimage1d;
ctx->Driver.CopyTexSubImage2D = _swrast_copy_texsubimage2d;
ctx->Driver.CopyColorSubTable = _swrast_CopyColorSubTable;
ctx->Driver.CopyConvolutionFilter1D = _swrast_CopyConvolutionFilter1D;
ctx->Driver.CopyConvolutionFilter2D = _swrast_CopyConvolutionFilter2D;
-
- ctx->Driver.CompressedTexImage1D = _mesa_store_compressed_teximage1d;
- ctx->Driver.CompressedTexImage2D = _mesa_store_compressed_teximage2d;
- ctx->Driver.CompressedTexImage3D = _mesa_store_compressed_teximage3d;
- ctx->Driver.CompressedTexSubImage1D = _mesa_store_compressed_texsubimage1d;
- ctx->Driver.CompressedTexSubImage2D = _mesa_store_compressed_texsubimage2d;
- ctx->Driver.CompressedTexSubImage3D = _mesa_store_compressed_texsubimage3d;
-
+
swdd->SetBuffer = MesaDriver::SetBuffer;
-
- tnl->Driver.RunPipeline = _tnl_run_pipeline;
-
- _swsetup_Wakeup(ctx);
}
// Plot a pixel. (0,0) is upper-left corner
// This is only used when drawing to the front buffer.
-static void Plot(BGLView *bglview, int x, int y)
+inline void Plot(BGLView *bglview, int x, int y)
{
// XXX There's got to be a better way!
BPoint p(x, y), q(x+1, y);
--- /dev/null
+/*******************************************************************************
+/
+/ File: GLView.h
+/
+/ Copyright 1993-98, Be Incorporated, All Rights Reserved.
+/
+*******************************************************************************/
+
+#ifndef BGLVIEW_H
+#define BGLVIEW_H
+
+// added by Brian Paul:
+#ifndef BGL_RGB
+#define BGL_RGB 0
+#define BGL_INDEX 1
+#define BGL_SINGLE 0
+#define BGL_DOUBLE 2
+#define BGL_DIRECT 0
+#define BGL_INDIRECT 4
+#define BGL_ACCUM 8
+#define BGL_ALPHA 16
+#define BGL_DEPTH 32
+#define BGL_OVERLAY 64
+#define BGL_UNDERLAY 128
+#define BGL_STENCIL 512
+#endif
+
+
+#include <GL/gl.h>
+#include <AppKit.h>
+#include <interface/Window.h>
+#include <interface/View.h>
+#include <interface/Bitmap.h>
+#include <game/WindowScreen.h>
+#include <game/DirectWindow.h>
+
+class BGLView : public BView {
+public:
+
+ BGLView(BRect rect, char *name,
+ ulong resizingMode, ulong mode,
+ ulong options);
+ virtual ~BGLView();
+
+ void LockGL();
+ void UnlockGL();
+ void SwapBuffers();
+
+ // Added for Mesa (can't be virtual!)
+ void CopySubBufferMESA(GLint x, GLint y, GLuint width, GLuint height);
+
+ BView * EmbeddedView();
+ status_t CopyPixelsOut(BPoint source, BBitmap *dest);
+ status_t CopyPixelsIn(BBitmap *source, BPoint dest);
+
+ virtual void ErrorCallback(unsigned long errorCode); // GLenum errorCode);
+
+ virtual void Draw(BRect updateRect);
+
+ virtual void AttachedToWindow();
+ virtual void AllAttached();
+ virtual void DetachedFromWindow();
+ virtual void AllDetached();
+
+ virtual void FrameResized(float width, float height);
+ virtual status_t Perform(perform_code d, void *arg);
+
+ /* The public methods below, for the moment,
+ are just pass-throughs to BView */
+
+ virtual status_t Archive(BMessage *data, bool deep = true) const;
+
+ virtual void MessageReceived(BMessage *msg);
+ virtual void SetResizingMode(uint32 mode);
+
+ virtual void Show();
+ virtual void Hide();
+
+ virtual BHandler *ResolveSpecifier(BMessage *msg, int32 index,
+ BMessage *specifier, int32 form,
+ const char *property);
+ virtual status_t GetSupportedSuites(BMessage *data);
+
+ /* New public functions */
+ void DirectConnected( direct_buffer_info *info );
+ void EnableDirectMode( bool enabled );
+
+private:
+
+ virtual void _ReservedGLView1();
+ virtual void _ReservedGLView2();
+ virtual void _ReservedGLView3();
+ virtual void _ReservedGLView4();
+ virtual void _ReservedGLView5();
+ virtual void _ReservedGLView6();
+ virtual void _ReservedGLView7();
+ virtual void _ReservedGLView8();
+
+ BGLView(const BGLView &);
+ BGLView &operator=(const BGLView &);
+
+ void dither_front();
+ bool confirm_dither();
+ void draw(BRect r);
+
+ void * m_gc;
+ uint32 m_options;
+ uint32 m_ditherCount;
+ BLocker m_drawLock;
+ BLocker m_displayLock;
+#if OLD_GLVIEW
+ BView * m_embeddedFront;
+ BView * m_embeddedBack;
+#else
+ void * m_clip_info;
+ void * _reserved1;
+#endif
+ BBitmap * m_ditherMap;
+ BRect m_bounds;
+ int16 * m_errorBuffer[2];
+ uint64 _reserved[8];
+
+ /* Direct Window stuff */
+private:
+ void drawScanline( int x1, int x2, int y, void *data );
+ static void scanlineHandler(struct rasStateRec *state, GLint x1, GLint x2);
+ void lock_draw();
+ void unlock_draw();
+ bool validateView();
+};
+
+
+
+class BGLScreen : public BWindowScreen {
+public:
+ BGLScreen(char *name,
+ ulong screenMode, ulong options,
+ status_t *error, bool debug=false);
+ ~BGLScreen();
+
+ void LockGL();
+ void UnlockGL();
+ void SwapBuffers();
+ virtual void ErrorCallback(GLenum errorCode);
+
+ virtual void ScreenConnected(bool connected);
+ virtual void FrameResized(float width, float height);
+ virtual status_t Perform(perform_code d, void *arg);
+
+ /* The public methods below, for the moment,
+ are just pass-throughs to BWindowScreen */
+
+ virtual status_t Archive(BMessage *data, bool deep = true) const;
+ virtual void MessageReceived(BMessage *msg);
+
+ virtual void Show();
+ virtual void Hide();
+
+ virtual BHandler *ResolveSpecifier(BMessage *msg,
+ int32 index,
+ BMessage *specifier,
+ int32 form,
+ const char *property);
+ virtual status_t GetSupportedSuites(BMessage *data);
+
+private:
+
+ virtual void _ReservedGLScreen1();
+ virtual void _ReservedGLScreen2();
+ virtual void _ReservedGLScreen3();
+ virtual void _ReservedGLScreen4();
+ virtual void _ReservedGLScreen5();
+ virtual void _ReservedGLScreen6();
+ virtual void _ReservedGLScreen7();
+ virtual void _ReservedGLScreen8();
+
+ BGLScreen(const BGLScreen &);
+ BGLScreen &operator=(const BGLScreen &);
+
+ void * m_gc;
+ long m_options;
+ BLocker m_drawLock;
+
+ int32 m_colorSpace;
+ uint32 m_screen_mode;
+
+ uint64 _reserved[7];
+};
+
+
+#endif
+
+
+
+
+
projects / mesa.git / commitdiff