--- /dev/null
+CONFIG_PPC_85xx=y
+CONFIG_SMP=y
+CONFIG_NR_CPUS=2
+CONFIG_CROSS_COMPILE="powerpc-linux-"
+CONFIG_LOCALVERSION="-ANI-uCP1020-64EE512"
+# CONFIG_LOCALVERSION_AUTO is not set
+CONFIG_DEFAULT_HOSTNAME="uCP1020-64EE512"
+# CONFIG_SWAP is not set
+CONFIG_SYSVIPC=y
+CONFIG_POSIX_MQUEUE=y
+CONFIG_AUDIT=y
+CONFIG_NO_HZ_IDLE=y
+CONFIG_BSD_PROCESS_ACCT=y
+CONFIG_IKCONFIG=y
+CONFIG_IKCONFIG_PROC=y
+CONFIG_LOG_BUF_SHIFT=14
+CONFIG_LOG_CPU_MAX_BUF_SHIFT=14
+CONFIG_SYSFS_DEPRECATED=y
+CONFIG_BLK_DEV_INITRD=y
+# CONFIG_RD_BZIP2 is not set
+# CONFIG_RD_LZMA is not set
+# CONFIG_RD_XZ is not set
+# CONFIG_RD_LZO is not set
+# CONFIG_RD_LZ4 is not set
+CONFIG_SYSCTL_SYSCALL=y
+CONFIG_EMBEDDED=y
+# CONFIG_SLUB_DEBUG is not set
+# CONFIG_COMPAT_BRK is not set
+CONFIG_JUMP_LABEL=y
+CONFIG_MODULES=y
+CONFIG_MODULE_UNLOAD=y
+CONFIG_MODULE_FORCE_UNLOAD=y
+# CONFIG_BLK_DEV_BSG is not set
+CONFIG_PARTITION_ADVANCED=y
+CONFIG_MAC_PARTITION=y
+# CONFIG_EFI_PARTITION is not set
+# CONFIG_IOSCHED_CFQ is not set
+CONFIG_UCP1020_SOM=y
+CONFIG_HIGHMEM=y
+CONFIG_PREEMPT=y
+# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
+CONFIG_MATH_EMULATION=y
+CONFIG_MATH_EMULATION_HW_UNIMPLEMENTED=y
+CONFIG_SWIOTLB=y
+# CONFIG_COMPACTION is not set
+CONFIG_PCI=y
+CONFIG_PCIEPORTBUS=y
+# CONFIG_PCIEAER is not set
+# CONFIG_PCIEASPM is not set
+CONFIG_PCI_MSI=y
+CONFIG_NET=y
+CONFIG_PACKET=y
+CONFIG_UNIX=y
+CONFIG_XFRM_USER=y
+CONFIG_NET_KEY=y
+CONFIG_INET=y
+CONFIG_IP_MULTICAST=y
+CONFIG_SYN_COOKIES=y
+# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
+# CONFIG_INET_XFRM_MODE_TUNNEL is not set
+# CONFIG_INET_XFRM_MODE_BEET is not set
+# CONFIG_INET_LRO is not set
+# CONFIG_IPV6 is not set
+CONFIG_NETFILTER=y
+CONFIG_BRIDGE_NETFILTER=y
+CONFIG_NF_CONNTRACK=y
+CONFIG_NF_CONNTRACK_FTP=y
+CONFIG_NETFILTER_XT_TARGET_CONNMARK=y
+CONFIG_NETFILTER_XT_TARGET_MARK=y
+CONFIG_NETFILTER_XT_MATCH_COMMENT=y
+CONFIG_NETFILTER_XT_MATCH_CONNMARK=y
+CONFIG_NETFILTER_XT_MATCH_CONNTRACK=y
+CONFIG_NETFILTER_XT_MATCH_HELPER=y
+CONFIG_NETFILTER_XT_MATCH_MARK=y
+CONFIG_NETFILTER_XT_MATCH_MULTIPORT=y
+CONFIG_NETFILTER_XT_MATCH_STATE=y
+CONFIG_NF_CONNTRACK_IPV4=y
+CONFIG_IP_NF_IPTABLES=y
+CONFIG_IP_NF_FILTER=y
+CONFIG_IP_NF_TARGET_REJECT=y
+CONFIG_IP_NF_NAT=y
+CONFIG_IP_NF_TARGET_MASQUERADE=y
+CONFIG_IP_NF_TARGET_NETMAP=y
+CONFIG_IP_NF_TARGET_REDIRECT=y
+CONFIG_IP_NF_MANGLE=y
+CONFIG_BRIDGE=y
+CONFIG_VLAN_8021Q=y
+CONFIG_NET_SCHED=y
+CONFIG_NET_SCH_HTB=y
+CONFIG_CFG80211=y
+# CONFIG_CFG80211_DEFAULT_PS is not set
+CONFIG_MAC80211=y
+# CONFIG_MAC80211_RC_MINSTREL is not set
+CONFIG_UEVENT_HELPER_PATH="/bin/hotplug"
+CONFIG_FW_LOADER_USER_HELPER_FALLBACK=y
+CONFIG_MTD=y
+CONFIG_MTD_CMDLINE_PARTS=y
+CONFIG_MTD_BLOCK=y
+CONFIG_FTL=y
+CONFIG_MTD_CFI=y
+CONFIG_MTD_CFI_INTELEXT=y
+CONFIG_MTD_CFI_AMDSTD=y
+CONFIG_MTD_PHYSMAP_OF=y
+CONFIG_MTD_M25P80=y
+CONFIG_MTD_SST25L=y
+CONFIG_MTD_NAND=y
+CONFIG_MTD_NAND_PLATFORM=y
+CONFIG_MTD_NAND_FSL_ELBC=y
+CONFIG_MTD_NAND_FSL_UPM=y
+CONFIG_MTD_SPI_NOR=y
+CONFIG_BLK_DEV_LOOP=y
+CONFIG_BLK_DEV_RAM=y
+CONFIG_BLK_DEV_RAM_SIZE=131072
+CONFIG_EEPROM_AT25=y
+CONFIG_SCSI=y
+CONFIG_BLK_DEV_SD=y
+CONFIG_CHR_DEV_ST=y
+CONFIG_BLK_DEV_SR=y
+CONFIG_CHR_DEV_SG=y
+CONFIG_SCSI_LOGGING=y
+CONFIG_NETDEVICES=y
+# CONFIG_NET_VENDOR_3COM is not set
+# CONFIG_NET_VENDOR_ADAPTEC is not set
+# CONFIG_NET_VENDOR_AGERE is not set
+# CONFIG_NET_VENDOR_ALTEON is not set
+# CONFIG_NET_VENDOR_AMD is not set
+# CONFIG_NET_VENDOR_ARC is not set
+# CONFIG_NET_VENDOR_ATHEROS is not set
+# CONFIG_NET_CADENCE is not set
+# CONFIG_NET_VENDOR_BROADCOM is not set
+# CONFIG_NET_VENDOR_BROCADE is not set
+# CONFIG_NET_VENDOR_CHELSIO is not set
+# CONFIG_NET_VENDOR_CISCO is not set
+# CONFIG_NET_VENDOR_DEC is not set
+# CONFIG_NET_VENDOR_DLINK is not set
+# CONFIG_NET_VENDOR_EMULEX is not set
+# CONFIG_NET_VENDOR_EXAR is not set
+CONFIG_GIANFAR=y
+# CONFIG_NET_VENDOR_HP is not set
+# CONFIG_NET_VENDOR_INTEL is not set
+# CONFIG_NET_VENDOR_MARVELL is not set
+# CONFIG_NET_VENDOR_MELLANOX is not set
+# CONFIG_NET_VENDOR_MICREL is not set
+# CONFIG_NET_VENDOR_MICROCHIP is not set
+# CONFIG_NET_VENDOR_MYRI is not set
+# CONFIG_NET_VENDOR_NATSEMI is not set
+# CONFIG_NET_VENDOR_NVIDIA is not set
+# CONFIG_NET_VENDOR_OKI is not set
+# CONFIG_NET_PACKET_ENGINE is not set
+# CONFIG_NET_VENDOR_QLOGIC is not set
+# CONFIG_NET_VENDOR_QUALCOMM is not set
+# CONFIG_NET_VENDOR_REALTEK is not set
+# CONFIG_NET_VENDOR_RDC is not set
+# CONFIG_NET_VENDOR_ROCKER is not set
+# CONFIG_NET_VENDOR_SAMSUNG is not set
+# CONFIG_NET_VENDOR_SEEQ is not set
+# CONFIG_NET_VENDOR_SILAN is not set
+# CONFIG_NET_VENDOR_SIS is not set
+# CONFIG_NET_VENDOR_SMSC is not set
+# CONFIG_NET_VENDOR_STMICRO is not set
+# CONFIG_NET_VENDOR_SUN is not set
+# CONFIG_NET_VENDOR_TEHUTI is not set
+# CONFIG_NET_VENDOR_TI is not set
+# CONFIG_NET_VENDOR_VIA is not set
+# CONFIG_NET_VENDOR_WIZNET is not set
+# CONFIG_NET_VENDOR_XILINX is not set
+CONFIG_MICREL_PHY=y
+CONFIG_IWLWIFI=m
+# CONFIG_INPUT_MOUSEDEV is not set
+# CONFIG_INPUT_KEYBOARD is not set
+# CONFIG_INPUT_MOUSE is not set
+CONFIG_SERIO_LIBPS2=y
+CONFIG_LEGACY_PTY_COUNT=16
+CONFIG_NOZOMI=y
+CONFIG_SERIAL_8250=y
+CONFIG_SERIAL_8250_CONSOLE=y
+CONFIG_SERIAL_8250_NR_UARTS=2
+CONFIG_SERIAL_8250_RUNTIME_UARTS=2
+CONFIG_SERIAL_8250_MANY_PORTS=y
+CONFIG_SERIAL_8250_DETECT_IRQ=y
+CONFIG_SERIAL_8250_RSA=y
+CONFIG_NVRAM=y
+CONFIG_I2C_CHARDEV=y
+CONFIG_I2C_MPC=y
+CONFIG_SPI=y
+CONFIG_SPI_BITBANG=y
+CONFIG_SPI_FSL_ESPI=y
+CONFIG_SPI_SPIDEV=y
+CONFIG_GPIOLIB=y
+CONFIG_GPIO_MPC8XXX=y
+CONFIG_SENSORS_LM90=y
+CONFIG_THERMAL=y
+CONFIG_WATCHDOG=y
+CONFIG_BOOKE_WDT=y
+CONFIG_BOOKE_WDT_DEFAULT_TIMEOUT=36
+CONFIG_MEDIA_SUPPORT=y
+CONFIG_MEDIA_CAMERA_SUPPORT=y
+CONFIG_MEDIA_CONTROLLER=y
+CONFIG_VIDEO_V4L2_SUBDEV_API=y
+CONFIG_MEDIA_USB_SUPPORT=y
+CONFIG_USB_VIDEO_CLASS=y
+CONFIG_USB_GSPCA=y
+CONFIG_USB_PWC=y
+CONFIG_USB_ZR364XX=y
+CONFIG_USB_STKWEBCAM=y
+CONFIG_VIDEO_EM28XX=y
+CONFIG_VIDEO_EM28XX_V4L2=y
+# CONFIG_HID is not set
+# CONFIG_USB_HID is not set
+CONFIG_USB=y
+CONFIG_USB_ANNOUNCE_NEW_DEVICES=y
+CONFIG_USB_DYNAMIC_MINORS=y
+CONFIG_USB_MON=y
+CONFIG_USB_EHCI_HCD=y
+CONFIG_USB_EHCI_FSL=y
+CONFIG_USB_ACM=y
+CONFIG_USB_WDM=y
+CONFIG_USB_TMC=y
+CONFIG_USB_STORAGE=y
+CONFIG_USB_STORAGE_DEBUG=y
+CONFIG_USB_MDC800=y
+CONFIG_MMC=y
+CONFIG_MMC_SDHCI=y
+CONFIG_MMC_SDHCI_PLTFM=y
+CONFIG_MMC_SDHCI_OF_ESDHC=y
+CONFIG_DMADEVICES=y
+CONFIG_FSL_DMA=y
+CONFIG_ASYNC_TX_DMA=y
+# CONFIG_IOMMU_SUPPORT is not set
+CONFIG_EXT2_FS=y
+CONFIG_EXT3_FS=y
+# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
+# CONFIG_EXT3_FS_XATTR is not set
+CONFIG_EXT4_FS=y
+CONFIG_XFS_FS=y
+CONFIG_MSDOS_FS=y
+CONFIG_VFAT_FS=y
+CONFIG_NTFS_FS=y
+CONFIG_PROC_KCORE=y
+CONFIG_TMPFS=y
+CONFIG_JFFS2_FS=y
+CONFIG_JFFS2_FS_WBUF_VERIFY=y
+CONFIG_JFFS2_SUMMARY=y
+CONFIG_JFFS2_FS_XATTR=y
+CONFIG_JFFS2_COMPRESSION_OPTIONS=y
+CONFIG_JFFS2_LZO=y
+CONFIG_JFFS2_RUBIN=y
+CONFIG_CRAMFS=y
+CONFIG_NFS_FS=y
+CONFIG_NFS_V4=y
+CONFIG_NFSD=y
+CONFIG_CIFS=y
+CONFIG_NLS_CODEPAGE_437=y
+CONFIG_NLS_ISO8859_1=y
+CONFIG_CRC_T10DIF=y
+CONFIG_CRC_ITU_T=y
+# CONFIG_SCHED_DEBUG is not set
+# CONFIG_DEBUG_PREEMPT is not set
+# CONFIG_DEBUG_BUGVERBOSE is not set
+CONFIG_RCU_CPU_STALL_TIMEOUT=60
+# CONFIG_RCU_CPU_STALL_INFO is not set
+# CONFIG_FTRACE is not set
+CONFIG_CRYPTO_CBC=y
+CONFIG_CRYPTO_PCBC=y
+CONFIG_CRYPTO_SHA1=y
+CONFIG_CRYPTO_SHA1_PPC=y
+CONFIG_CRYPTO_DEFLATE=y
+# CONFIG_CRYPTO_ANSI_CPRNG is not set
+CONFIG_CRYPTO_DEV_TALITOS=y
--- /dev/null
+From a243628639e12a4bd0a737eac78a12ed240cd137 Mon Sep 17 00:00:00 2001
+From: Oleksandr G Zhadan <oleks@arcturusnetworks.com>
+Date: Mon, 18 Jul 2016 10:40:16 -0400
+Subject: [PATCH] Arcturus uCP1020 BSP support
+
+The uCP1020 product family (ucp1020) is an Arcturus Networks Inc.
+System on Modules product featuring a NXP QorIQ P1020 CPU,
+optionally populated with 1 or 2 Gig-Ethernet PHYs,
+DDR3, NOR Flash, eMMC NAND Flash and/or SPI Flash.
+
+Signed-off-by: Oleksandr G Zhadan <oleks@arcturusnetworks.com>
+Signed-off-by: Michael Durrant <arcsupport@arcturusnetworks.com>
+---
+ arch/powerpc/boot/dts/ucp1020.dts | 87 ++++++++++++
+ arch/powerpc/boot/dts/ucp1020.dtsi | 211 ++++++++++++++++++++++++++++++
+ arch/powerpc/platforms/85xx/Kconfig | 7 +
+ arch/powerpc/platforms/85xx/Makefile | 1 +
+ arch/powerpc/platforms/85xx/ucp1020_som.c | 92 +++++++++++++
+ 5 files changed, 398 insertions(+)
+ create mode 100644 arch/powerpc/boot/dts/ucp1020.dts
+ create mode 100644 arch/powerpc/boot/dts/ucp1020.dtsi
+ create mode 100644 arch/powerpc/platforms/85xx/ucp1020_som.c
+
+diff --git a/arch/powerpc/boot/dts/ucp1020.dts b/arch/powerpc/boot/dts/ucp1020.dts
+new file mode 100644
+index 0000000..291e70a
+--- /dev/null
++++ b/arch/powerpc/boot/dts/ucp1020.dts
+@@ -0,0 +1,87 @@
++/*
++ * uCP1020 Tree Source (32-bit address map)
++ *
++ * Copyright 2013-2016 Arcturus Networks Inc.
++ *
++ * Redistribution and use in source and binary forms, with or without
++ * modification, are permitted provided that the following conditions are met:
++ * * Redistributions of source code must retain the above copyright
++ * notice, this list of conditions and the following disclaimer.
++ * * Redistributions in binary form must reproduce the above copyright
++ * notice, this list of conditions and the following disclaimer in the
++ * documentation and/or other materials provided with the distribution.
++ * * Neither the name of Freescale Semiconductor nor the
++ * names of its contributors may be used to endorse or promote products
++ * derived from this software without specific prior written permission.
++ *
++ *
++ * ALTERNATIVELY, this software may be distributed under the terms of the
++ * GNU General Public License ("GPL") as published by the Free Software
++ * Foundation, either version 2 of that License or (at your option) any
++ * later version.
++ *
++ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
++ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
++ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
++ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
++ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
++ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
++ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
++ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
++ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
++ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
++ */
++
++/include/ "fsl/p1020si-pre.dtsi"
++/ {
++ model = "arcturus,uCP1020";
++ compatible = "arcturus,uCP1020";
++
++ memory {
++ device_type = "memory";
++ };
++
++ lbc: localbus@ffe05000 {
++ reg = <0 0xffe05000 0 0x1000>;
++
++ /* NOR Flash */
++ ranges = <0x0 0x0 0x0 0xec000000 0x04000000>;
++ };
++
++ soc: soc@ffe00000 {
++ ranges = <0x0 0x0 0xffe00000 0x100000>;
++ };
++
++ pci0: pcie@ffe09000 {
++ ranges = <0x2000000 0x0 0xa0000000 0 0xa0000000 0x0 0x20000000
++ 0x1000000 0x0 0x00000000 0 0xffc10000 0x0 0x10000>;
++ reg = <0 0xffe09000 0 0x1000>;
++ pcie@0 {
++ ranges = <0x2000000 0x0 0xa0000000
++ 0x2000000 0x0 0xa0000000
++ 0x0 0x20000000
++
++ 0x1000000 0x0 0x0
++ 0x1000000 0x0 0x0
++ 0x0 0x100000>;
++ };
++ };
++
++ pci1: pcie@ffe0a000 {
++ reg = <0 0xffe0a000 0 0x1000>;
++ ranges = <0x2000000 0x0 0x80000000 0 0x80000000 0x0 0x20000000
++ 0x1000000 0x0 0x00000000 0 0xffc00000 0x0 0x10000>;
++ pcie@0 {
++ ranges = <0x2000000 0x0 0x80000000
++ 0x2000000 0x0 0x80000000
++ 0x0 0x20000000
++
++ 0x1000000 0x0 0x0
++ 0x1000000 0x0 0x0
++ 0x0 0x100000>;
++ };
++ };
++};
++
++/include/ "ucp1020.dtsi"
++/include/ "fsl/p1020si-post.dtsi"
+diff --git a/arch/powerpc/boot/dts/ucp1020.dtsi b/arch/powerpc/boot/dts/ucp1020.dtsi
+new file mode 100644
+index 0000000..7cff949
+--- /dev/null
++++ b/arch/powerpc/boot/dts/ucp1020.dtsi
+@@ -0,0 +1,211 @@
++/*
++ * uCP1020 Device Tree Source stub (no addresses or top-level ranges)
++ *
++ * Copyright 2013-2016 Arcturus Networks Inc.
++ *
++ * Redistribution and use in source and binary forms, with or without
++ * modification, are permitted provided that the following conditions are met:
++ * * Redistributions of source code must retain the above copyright
++ * notice, this list of conditions and the following disclaimer.
++ * * Redistributions in binary form must reproduce the above copyright
++ * notice, this list of conditions and the following disclaimer in the
++ * documentation and/or other materials provided with the distribution.
++ * * Neither the name of Freescale Semiconductor nor the
++ * names of its contributors may be used to endorse or promote products
++ * derived from this software without specific prior written permission.
++ *
++ *
++ * ALTERNATIVELY, this software may be distributed under the terms of the
++ * GNU General Public License ("GPL") as published by the Free Software
++ * Foundation, either version 2 of that License or (at your option) any
++ * later version.
++ *
++ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
++ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
++ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
++ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
++ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
++ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
++ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
++ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
++ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
++ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
++ */
++
++&lbc {
++ nor@0,0 {
++ #address-cells = <1>;
++ #size-cells = <1>;
++ compatible = "cfi-flash";
++ reg = <0x0 0x0 0x04000000>;
++ bank-width = <2>;
++ device-width = <1>;
++
++ partition@100000 {
++ /* 7MB - PART 0 */
++ reg = <0x00100000 0x00700000>;
++ label = "0";
++ };
++
++ partition@800000 {
++ /* 32MB - PART 1 */
++ reg = <0x0800000 0x02000000>;
++ label = "1";
++ };
++
++ partition@2800000 {
++ /* 8MB - PART 2 */
++ reg = <0x02800000 0x00800000>;
++ label = "2";
++ };
++
++ partition@3000000 {
++ /* (16MB - 512K) - PART 3 JFFS 2 */
++ reg = <0x03000000 0x00f80000>;
++ label = "3";
++ };
++
++ partition@0 {
++ /* 512KB - bootloader[u-boot, uCbootloader] */
++ reg = <0x0 0x00080000>;
++ label = "BOOT_SPI";
++ };
++
++ partition@3f80000 {
++ /* 512KB - bootloade NOR r[u-boot, uCbootloader] */
++ reg = <0x03f80000 0x00080000>;
++ label = "B";
++ };
++
++ partition@80000 {
++ /* 256KB - bootloaders environment (uCenv) */
++ reg = <0x00080000 0x00040000>;
++
++ label = "E";
++ };
++
++ partition@C0000 {
++ /* 256KB - bootloaders environment (u-boot) */
++ reg = <0x000C0000 0x00040000>;
++ label = "UENV";
++ };
++ };
++};
++
++&soc {
++ i2c@3000 {
++ spoc@14 {
++ compatible = "conexant,cx2070x";
++ reg = <0x14>;
++ };
++ };
++
++ i2c@3100 {
++ dtt@4C {
++ compatible = "national,lm90";
++ reg = <0x4C>;
++ };
++ };
++
++ spi@7000 {
++ flash@0 {
++ #address-cells = <1>;
++ #size-cells = <1>;
++ compatible = "winbond,w25q80bl";
++ reg = <0>;
++ spi-max-frequency = <40000000>; /* input clock */
++
++ partition@0 {
++ label = "SPI MBR";
++ reg = <0x00000000 0x00002000>;
++ read-only;
++ };
++ partition@2000 {
++ label = "SPI ENV";
++ reg = <0x00002000 0x00006000>;
++ read-only;
++ };
++ partition@8000 {
++ label = "SPI FS";
++ reg = <0x00008000 0x000F8000>;
++ };
++ };
++ flash@3 {
++ #address-cells = <1>;
++ #size-cells = <1>;
++ compatible = "spansion,s25fl008k";
++ reg = <3>;
++ spi-max-frequency = <40000000>; /* input clock */
++ partition@0 {
++ label = "SPI USER";
++ reg = <0x00000000 0x00100000>;
++ };
++ };
++ };
++
++ usb@22000 {
++ phy_type = "ulpi";
++ dr_mode = "host";
++ };
++
++ mdio@24000 {
++ phy0: ethernet-phy@4 {
++ interrupt-parent = <&mpic>;
++ interrupts = <4 1>;
++ reg = <0x04>;
++ };
++
++ phy1: ethernet-phy@6 {
++ interrupt-parent = <&mpic>;
++ interrupts = <8 1>;
++ reg = <0x6>;
++ };
++ };
++
++ enet0: ethernet@b0000 {
++ phy-handle = <&phy0>;
++ phy-connection-type = "rgmii-id";
++ };
++
++ enet1: ethernet@b1000 {
++ status = "disabled";
++ };
++
++ enet2: ethernet@b2000 {
++ phy-handle = <&phy1>;
++ phy-connection-type = "rgmii-id";
++ };
++
++ gpio0: gpio@f000 {
++ compatible = "fsl,mpc8572-gpio", "fsl,pq3-gpio";
++ reg = <0xf000 0x1000>;
++ interrupts = <47 2>;
++ interrupt-parent = <&mpic>;
++ #gpio-cells = <2>;
++ gpio-controller;
++ };
++
++ gpio-leds {
++ compatible = "gpio-leds";
++ gpio5 {
++ label = "led1"; /* LED15 */
++ gpios = <&gpio0 5 0>;
++ };
++ gpio12 {
++ label = "led2"; /* LED16 */
++ gpios = <&gpio0 12 0>;
++ };
++ gpio13 {
++ label = "led3"; /* LED17 */
++ gpios = <&gpio0 13 0>;
++ };
++ gpio7 {
++ label = "led4"; /* LED18 */
++ gpios = <&gpio0 7 0>;
++ };
++ gpio6 {
++ label = "led5"; /* LED19 */
++ gpios = <&gpio0 6 0>;
++ };
++ };
++};
+diff --git a/arch/powerpc/platforms/85xx/Kconfig b/arch/powerpc/platforms/85xx/Kconfig
+index 2fb4b24..81a944f 100644
+--- a/arch/powerpc/platforms/85xx/Kconfig
++++ b/arch/powerpc/platforms/85xx/Kconfig
+@@ -241,6 +241,13 @@ config SGY_CTS1000
+ help
+ Enable this to support functionality in Servergy's CTS-1000 systems.
+
++config UCP1020_SOM
++ bool "Arcturus uCP1020 Rev.1.3 System on Module"
++ select DEFAULT_UIMAGE
++ help
++ This option enables support for the Arcturus Networks Inc.
++ uCP1020 System on Module.
++
+ config MVME2500
+ bool "Artesyn MVME2500"
+ select DEFAULT_UIMAGE
+diff --git a/arch/powerpc/platforms/85xx/Makefile b/arch/powerpc/platforms/85xx/Makefile
+index 1fe7fb9..84f2b9a 100644
+--- a/arch/powerpc/platforms/85xx/Makefile
++++ b/arch/powerpc/platforms/85xx/Makefile
+@@ -31,4 +31,5 @@ obj-$(CONFIG_XES_MPC85xx) += xes_mpc85xx.o
+ obj-$(CONFIG_GE_IMP3A) += ge_imp3a.o
+ obj-$(CONFIG_PPC_QEMU_E500) += qemu_e500.o
+ obj-$(CONFIG_SGY_CTS1000) += sgy_cts1000.o
++obj-$(CONFIG_UCP1020_SOM) += ucp1020_som.o
+ obj-$(CONFIG_MVME2500) += mvme2500.o
+diff --git a/arch/powerpc/platforms/85xx/ucp1020_som.c b/arch/powerpc/platforms/85xx/ucp1020_som.c
+new file mode 100644
+index 0000000..777e8ad
+--- /dev/null
++++ b/arch/powerpc/platforms/85xx/ucp1020_som.c
+@@ -0,0 +1,92 @@
++/*
++ * Arcturus Networks Inc. uCP1020 module Setup
++ *
++ * Copyright 2014-2016 Arcturus Networks Inc.
++ *
++ * by Oleksandr G Zhadan & Michael Durrant (www.ArcturusNetworks.com)
++ *
++ * This program is free software; you can redistribute it and/or modify it
++ * under the terms of the GNU General Public License as published by the
++ * Free Software Foundation; either version 2 of the License, or (at your
++ * option) any later version.
++ */
++
++#include <linux/stddef.h>
++#include <linux/kernel.h>
++#include <linux/pci.h>
++#include <linux/kdev_t.h>
++#include <linux/delay.h>
++#include <linux/seq_file.h>
++#include <linux/interrupt.h>
++#include <linux/of_platform.h>
++
++#include <asm/time.h>
++#include <asm/machdep.h>
++#include <asm/pci-bridge.h>
++#include <mm/mmu_decl.h>
++#include <asm/prom.h>
++#include <asm/udbg.h>
++#include <asm/mpic.h>
++#include <asm/fsl_guts.h>
++
++#include <sysdev/fsl_soc.h>
++#include <sysdev/fsl_pci.h>
++#include "smp.h"
++
++#include "mpc85xx.h"
++
++void __init ucp1020_som_pic_init(void)
++{
++ struct mpic *mpic = mpic_alloc(NULL, 0, MPIC_BIG_ENDIAN |
++ MPIC_SINGLE_DEST_CPU,
++ 0, 256, " OpenPIC ");
++
++ BUG_ON(mpic == NULL);
++
++ mpic_init(mpic);
++}
++
++/*
++ * Setup the architecture
++ */
++static void __init ucp1020_som_setup_arch(void)
++{
++ if (ppc_md.progress)
++ ppc_md.progress("uCP1020_SoM_setup_arch()", 0);
++
++ mpc85xx_smp_init();
++
++ fsl_pci_assign_primary();
++ pr_info("\n\t%s (http://www.arcturusnetworks.com)\n", ppc_md.name);
++}
++
++machine_arch_initcall(ucp1020, mpc85xx_common_publish_devices);
++machine_arch_initcall(ucp1020, swiotlb_setup_bus_notifier);
++
++/*
++ * Called very early, device-tree isn't unflattened
++ */
++static int __init ucp1020_probe(void)
++{
++ unsigned long root = of_get_flat_dt_root();
++
++ if (of_flat_dt_is_compatible(root, "arcturus,uCP1020"))
++ return 1;
++ return 0;
++}
++
++define_machine(ucp1020) {
++ .name = "uCP1020 SoM - Arcturus Networks Inc.",
++ .probe = ucp1020_probe,
++ .setup_arch = ucp1020_som_setup_arch,
++ .init_IRQ = ucp1020_som_pic_init,
++#ifdef CONFIG_PCI
++ .pcibios_fixup_bus = fsl_pcibios_fixup_bus,
++#endif
++ .get_irq = mpic_get_irq,
++ .restart = fsl_rstcr_restart,
++ .calibrate_decr = generic_calibrate_decr,
++#ifdef DEBUG
++ .progress = udbg_progress,
++#endif
++};
+--
+2.1.4
+
projects / buildroot.git / commitdiff