CXX=${CXX-${host_alias}-c++}
CXXFLAGS=${CXXFLAGS-"-g -O2"}
CC_FOR_BUILD=${CC_FOR_BUILD-gcc}
- CC_FOR_TARGET=${CC_FOR_TARGET-${target_alias}-gcc}
- CXX_FOR_TARGET=${CXX_FOR_TARGET-${target_alias}-c++}
- GCJ_FOR_TARGET=${GCJ_FOR_TARGET-${target_alias}-gcj}
- GCC_FOR_TARGET=${GCC_FOR_TARGET-${CC_FOR_TARGET-${target_alias}-gcc}}
BUILD_PREFIX=${build_alias}-
BUILD_PREFIX_1=${build_alias}-
# This is all going to change when we autoconfiscate...
CC_FOR_BUILD="\$(CC)"
- GCC_FOR_TARGET="\$(USUAL_GCC_FOR_TARGET)"
BUILD_PREFIX=
BUILD_PREFIX_1=loser-
# Extract the first word of "gcc", so it can be a program name with args.
set dummy gcc; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:1820: checking for $ac_word" >&5
+echo "configure:1815: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "cc", so it can be a program name with args.
set dummy cc; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:1850: checking for $ac_word" >&5
+echo "configure:1845: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "cl", so it can be a program name with args.
set dummy cl; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:1901: checking for $ac_word" >&5
+echo "configure:1896: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
fi
echo $ac_n "checking whether the C compiler ($CC $CFLAGS $LDFLAGS) works""... $ac_c" 1>&6
-echo "configure:1933: checking whether the C compiler ($CC $CFLAGS $LDFLAGS) works" >&5
+echo "configure:1928: checking whether the C compiler ($CC $CFLAGS $LDFLAGS) works" >&5
ac_ext=c
# CFLAGS is not in ac_cpp because -g, -O, etc. are not valid cpp options.
cat > conftest.$ac_ext << EOF
-#line 1944 "configure"
+#line 1939 "configure"
#include "confdefs.h"
main(){return(0);}
EOF
-if { (eval echo configure:1949: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:1944: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
ac_cv_prog_cc_works=yes
# If we can't run a trivial program, we are probably using a cross compiler.
if (./conftest; exit) 2>/dev/null; then
{ echo "configure: error: installation or configuration problem: C compiler cannot create executables." 1>&2; exit 1; }
fi
echo $ac_n "checking whether the C compiler ($CC $CFLAGS $LDFLAGS) is a cross-compiler""... $ac_c" 1>&6
-echo "configure:1975: checking whether the C compiler ($CC $CFLAGS $LDFLAGS) is a cross-compiler" >&5
+echo "configure:1970: checking whether the C compiler ($CC $CFLAGS $LDFLAGS) is a cross-compiler" >&5
echo "$ac_t""$ac_cv_prog_cc_cross" 1>&6
cross_compiling=$ac_cv_prog_cc_cross
echo $ac_n "checking whether we are using GNU C""... $ac_c" 1>&6
-echo "configure:1980: checking whether we are using GNU C" >&5
+echo "configure:1975: checking whether we are using GNU C" >&5
if eval "test \"`echo '$''{'ac_cv_prog_gcc'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
yes;
#endif
EOF
-if { ac_try='${CC-cc} -E conftest.c'; { (eval echo configure:1989: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }; } | egrep yes >/dev/null 2>&1; then
+if { ac_try='${CC-cc} -E conftest.c'; { (eval echo configure:1984: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }; } | egrep yes >/dev/null 2>&1; then
ac_cv_prog_gcc=yes
else
ac_cv_prog_gcc=no
ac_save_CFLAGS="$CFLAGS"
CFLAGS=
echo $ac_n "checking whether ${CC-cc} accepts -g""... $ac_c" 1>&6
-echo "configure:2008: checking whether ${CC-cc} accepts -g" >&5
+echo "configure:2003: checking whether ${CC-cc} accepts -g" >&5
if eval "test \"`echo '$''{'ac_cv_prog_cc_g'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "${ac_tool_prefix}gnatbind", so it can be a program name with args.
set dummy ${ac_tool_prefix}gnatbind; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:2075: checking for $ac_word" >&5
+echo "configure:2070: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_GNATBIND'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "gnatbind", so it can be a program name with args.
set dummy gnatbind; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:2107: checking for $ac_word" >&5
+echo "configure:2102: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_GNATBIND'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
fi
echo $ac_n "checking whether compiler driver understands Ada""... $ac_c" 1>&6
-echo "configure:2140: checking whether compiler driver understands Ada" >&5
+echo "configure:2135: checking whether compiler driver understands Ada" >&5
if eval "test \"`echo '$''{'acx_cv_cc_gcc_supports_ada'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
fi
echo $ac_n "checking how to compare bootstrapped objects""... $ac_c" 1>&6
-echo "configure:2172: checking how to compare bootstrapped objects" >&5
+echo "configure:2167: checking how to compare bootstrapped objects" >&5
if eval "test \"`echo '$''{'gcc_cv_prog_cmp_skip'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
CFLAGS="$CFLAGS $gmpinc"
# Check GMP actually works
echo $ac_n "checking for correct version of gmp.h""... $ac_c" 1>&6
-echo "configure:2270: checking for correct version of gmp.h" >&5
+echo "configure:2265: checking for correct version of gmp.h" >&5
cat > conftest.$ac_ext <<EOF
-#line 2272 "configure"
+#line 2267 "configure"
#include "confdefs.h"
#include "gmp.h"
int main() {
; return 0; }
EOF
-if { (eval echo configure:2283: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:2278: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
rm -rf conftest*
echo "$ac_t""yes" 1>&6
else
if test x"$have_gmp" = xyes; then
echo $ac_n "checking for MPFR""... $ac_c" 1>&6
-echo "configure:2296: checking for MPFR" >&5
+echo "configure:2291: checking for MPFR" >&5
saved_LIBS="$LIBS"
LIBS="$LIBS $gmplibs"
cat > conftest.$ac_ext <<EOF
-#line 2301 "configure"
+#line 2296 "configure"
#include "confdefs.h"
#include <gmp.h>
#include <mpfr.h>
mpfr_t n; mpfr_init(n);
; return 0; }
EOF
-if { (eval echo configure:2309: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:2304: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
echo "$ac_t""yes" 1>&6
else
# Extract the first word of "$ac_prog", so it can be a program name with args.
set dummy $ac_prog; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:2815: checking for $ac_word" >&5
+echo "configure:2810: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_CONFIGURED_BISON'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "$ac_prog", so it can be a program name with args.
set dummy $ac_prog; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:2850: checking for $ac_word" >&5
+echo "configure:2845: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_CONFIGURED_YACC'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "$ac_prog", so it can be a program name with args.
set dummy $ac_prog; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:2885: checking for $ac_word" >&5
+echo "configure:2880: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_CONFIGURED_M4'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "$ac_prog", so it can be a program name with args.
set dummy $ac_prog; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:2920: checking for $ac_word" >&5
+echo "configure:2915: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_CONFIGURED_FLEX'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "$ac_prog", so it can be a program name with args.
set dummy $ac_prog; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:2955: checking for $ac_word" >&5
+echo "configure:2950: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_CONFIGURED_LEX'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "$ac_prog", so it can be a program name with args.
set dummy $ac_prog; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:2990: checking for $ac_word" >&5
+echo "configure:2985: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_CONFIGURED_MAKEINFO'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
FLAGS_FOR_TARGET=$FLAGS_FOR_TARGET' -L$$r/$(HOST_SUBDIR)/ld'
fi
-if test "x${CC_FOR_TARGET+set}" = xset; then
- :
-elif test -d ${srcdir}/gcc; then
- CC_FOR_TARGET='$$r/$(HOST_SUBDIR)/gcc/xgcc -B$$r/$(HOST_SUBDIR)/gcc/'
-elif test "$host" = "$target"; then
- CC_FOR_TARGET='$(CC)'
-else
- CC_FOR_TARGET=`echo gcc | sed "${program_transform_name}"`
-fi
-CC_FOR_TARGET=$CC_FOR_TARGET' $(FLAGS_FOR_TARGET)'
-
-if test "x${GCJ_FOR_TARGET+set}" = xset; then
- :
-elif test -d ${srcdir}/gcc; then
- GCJ_FOR_TARGET='$$r/$(HOST_SUBDIR)/gcc/gcj -B$$r/$(HOST_SUBDIR)/gcc/'
-elif test "$host" = "$target"; then
- GCJ_FOR_TARGET='gcj'
-else
- GCJ_FOR_TARGET=`echo gcj | sed "${program_transform_name}"`
-fi
-GCJ_FOR_TARGET=$GCJ_FOR_TARGET' $(FLAGS_FOR_TARGET)'
-
-if test "x${GFORTRAN_FOR_TARGET+set}" = xset; then
- :
-elif test -d ${srcdir}/gcc; then
- GFORTRAN_FOR_TARGET='$$r/$(HOST_SUBDIR)/gcc/gfortran -B$$r/$(HOST_SUBDIR)/gcc/'
-elif test "$host" = "$target"; then
- GFORTRAN_FOR_TARGET='gfortran'
-else
- GFORTRAN_FOR_TARGET=`echo gfortran | sed "${program_transform_name}"`
-fi
-case $GFORTRAN_FOR_TARGET in
-*' $(FLAGS_FOR_TARGET)') ;;
-*) GFORTRAN_FOR_TARGET=$GFORTRAN_FOR_TARGET' $(FLAGS_FOR_TARGET)' ;;
-esac
-
-# Don't use libstdc++-v3's flags to configure/build itself.
-libstdcxx_flags='`test ! -f $$r/$(TARGET_SUBDIR)/libstdc++-v3/scripts/testsuite_flags || $(SHELL) $$r/$(TARGET_SUBDIR)/libstdc++-v3/scripts/testsuite_flags --build-includes` -L$$r/$(TARGET_SUBDIR)/libstdc++-v3/src -L$$r/$(TARGET_SUBDIR)/libstdc++-v3/src/.libs'
-raw_libstdcxx_flags='-L$$r/$(TARGET_SUBDIR)/libstdc++-v3/src -L$$r/$(TARGET_SUBDIR)/libstdc++-v3/src/.libs'
-
-if test "x${CXX_FOR_TARGET+set}" = xset; then
- if test "x${RAW_CXX_FOR_TARGET+set}" != xset; then
- RAW_CXX_FOR_TARGET=${CXX_FOR_TARGET}
- fi
-elif test -d ${srcdir}/gcc; then
- # We add -shared-libgcc to CXX_FOR_TARGET whenever we use xgcc instead
- # of g++ for linking C++ or Java, because g++ has -shared-libgcc by
- # default whereas gcc does not.
- # RAW_CXX_FOR_TARGET is for linking C++ or java; CXX_FOR_TARGET is for
- # all other cases.
- CXX_FOR_TARGET='$$r/$(HOST_SUBDIR)/gcc/g++ -B$$r/$(HOST_SUBDIR)/gcc/ -nostdinc++ '$libstdcxx_flags
- RAW_CXX_FOR_TARGET='$$r/$(HOST_SUBDIR)/gcc/xgcc -shared-libgcc -B$$r/$(HOST_SUBDIR)/gcc/ -nostdinc++ '$raw_libstdcxx_flags
-elif test "$host" = "$target"; then
- CXX_FOR_TARGET='$(CXX)'
- RAW_CXX_FOR_TARGET=${CXX_FOR_TARGET}
-else
- CXX_FOR_TARGET=`echo c++ | sed "${program_transform_name}"`
- RAW_CXX_FOR_TARGET=${CXX_FOR_TARGET}
-fi
-CXX_FOR_TARGET=$CXX_FOR_TARGET' $(FLAGS_FOR_TARGET)'
-RAW_CXX_FOR_TARGET=$RAW_CXX_FOR_TARGET' $(FLAGS_FOR_TARGET)'
-
-qCXX_FOR_TARGET=`echo "$CXX_FOR_TARGET" | sed 's,[&%],\\\&,g'`
-qRAW_CXX_FOR_TARGET=`echo "$RAW_CXX_FOR_TARGET" | sed 's,[&%],\\\&,g'`
-
-# We want to defer the evaluation of `cmd`s and shell variables in
-# CXX_FOR_TARGET when recursing in the top-level Makefile, such as for
-# bootstrap. We'll enclose CXX_FOR_TARGET_FOR_RECURSIVE_MAKE in single
-# quotes, but we still have to duplicate `$'s so that shell variables
-# can be expanded by the nested make as shell variables, not as make
-# macros.
-qqCXX_FOR_TARGET=`echo "$qCXX_FOR_TARGET" | sed -e 's,[$][$],$$$$,g'`
-qqRAW_CXX_FOR_TARGET=`echo "$qRAW_CXX_FOR_TARGET" | sed -e 's,[$][$],$$$$,g'`
-
-# Wrap CC_FOR_TARGET and friends, for certain types of builds.
-CC_FOR_TARGET="\$(STAGE_CC_WRAPPER) ${CC_FOR_TARGET}"
-GCJ_FOR_TARGET="\$(STAGE_CC_WRAPPER) ${GCJ_FOR_TARGET}"
-GFORTRAN_FOR_TARGET="\$(STAGE_CC_WRAPPER) ${GFORTRAN_FOR_TARGET}"
-CXX_FOR_TARGET="\$(STAGE_CC_WRAPPER) ${qCXX_FOR_TARGET}"
-RAW_CXX_FOR_TARGET="\$(STAGE_CC_WRAPPER) ${qRAW_CXX_FOR_TARGET}"
-CXX_FOR_TARGET_FOR_RECURSIVE_MAKE="\$(STAGE_CC_WRAPPER) ${qqCXX_FOR_TARGET}"
-RAW_CXX_FOR_TARGET_FOR_RECURSIVE_MAKE="\$(STAGE_CC_WRAPPER) ${qqRAW_CXX_FOR_TARGET}"
-
# Makefile fragments.
for frag in host_makefile_frag target_makefile_frag alphaieee_frag ospace_frag;
do
# Extract the first word of "${ncn_tool_prefix}ar", so it can be a program name with args.
set dummy ${ncn_tool_prefix}ar; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:3597: checking for $ac_word" >&5
+echo "configure:3509: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_AR'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "ar", so it can be a program name with args.
set dummy ar; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:3630: checking for $ac_word" >&5
+echo "configure:3542: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_ncn_cv_AR'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "${ncn_tool_prefix}as", so it can be a program name with args.
set dummy ${ncn_tool_prefix}as; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:3669: checking for $ac_word" >&5
+echo "configure:3581: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_AS'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "as", so it can be a program name with args.
set dummy as; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:3702: checking for $ac_word" >&5
+echo "configure:3614: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_ncn_cv_AS'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "${ncn_tool_prefix}dlltool", so it can be a program name with args.
set dummy ${ncn_tool_prefix}dlltool; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:3741: checking for $ac_word" >&5
+echo "configure:3653: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_DLLTOOL'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "dlltool", so it can be a program name with args.
set dummy dlltool; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:3774: checking for $ac_word" >&5
+echo "configure:3686: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_ncn_cv_DLLTOOL'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "${ncn_tool_prefix}ld", so it can be a program name with args.
set dummy ${ncn_tool_prefix}ld; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:3813: checking for $ac_word" >&5
+echo "configure:3725: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_LD'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "ld", so it can be a program name with args.
set dummy ld; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:3846: checking for $ac_word" >&5
+echo "configure:3758: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_ncn_cv_LD'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "${ncn_tool_prefix}nm", so it can be a program name with args.
set dummy ${ncn_tool_prefix}nm; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:3885: checking for $ac_word" >&5
+echo "configure:3797: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_NM'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "nm", so it can be a program name with args.
set dummy nm; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:3918: checking for $ac_word" >&5
+echo "configure:3830: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_ncn_cv_NM'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "${ncn_tool_prefix}ranlib", so it can be a program name with args.
set dummy ${ncn_tool_prefix}ranlib; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:3957: checking for $ac_word" >&5
+echo "configure:3869: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_RANLIB'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "ranlib", so it can be a program name with args.
set dummy ranlib; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:3990: checking for $ac_word" >&5
+echo "configure:3902: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_ncn_cv_RANLIB'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "${ncn_tool_prefix}windres", so it can be a program name with args.
set dummy ${ncn_tool_prefix}windres; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:4029: checking for $ac_word" >&5
+echo "configure:3941: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_WINDRES'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "windres", so it can be a program name with args.
set dummy windres; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:4062: checking for $ac_word" >&5
+echo "configure:3974: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_ncn_cv_WINDRES'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "${ncn_tool_prefix}objcopy", so it can be a program name with args.
set dummy ${ncn_tool_prefix}objcopy; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:4101: checking for $ac_word" >&5
+echo "configure:4013: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_OBJCOPY'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "objcopy", so it can be a program name with args.
set dummy objcopy; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:4134: checking for $ac_word" >&5
+echo "configure:4046: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_ncn_cv_OBJCOPY'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "${ncn_tool_prefix}objdump", so it can be a program name with args.
set dummy ${ncn_tool_prefix}objdump; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:4173: checking for $ac_word" >&5
+echo "configure:4085: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_OBJDUMP'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "objdump", so it can be a program name with args.
set dummy objdump; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:4206: checking for $ac_word" >&5
+echo "configure:4118: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_ncn_cv_OBJDUMP'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
-# Target tools.
+# Target tools. Do the tests using the names they may have passed in
+# the environment, then move it to CONFIGURED_*_FOR_TARGET.
if test -n "$ncn_target_tool_prefix"; then
# Extract the first word of "${ncn_target_tool_prefix}ar", so it can be a program name with args.
set dummy ${ncn_target_tool_prefix}ar; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:4252: checking for $ac_word" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_CONFIGURED_AR_FOR_TARGET'+set}'`\" = set"; then
+echo "configure:4165: checking for $ac_word" >&5
+if eval "test \"`echo '$''{'ac_cv_prog_AR_FOR_TARGET'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
- if test -n "$CONFIGURED_AR_FOR_TARGET"; then
- ac_cv_prog_CONFIGURED_AR_FOR_TARGET="$CONFIGURED_AR_FOR_TARGET" # Let the user override the test.
+ if test -n "$AR_FOR_TARGET"; then
+ ac_cv_prog_AR_FOR_TARGET="$AR_FOR_TARGET" # Let the user override the test.
else
IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":"
ac_dummy="$PATH"
for ac_dir in $ac_dummy; do
test -z "$ac_dir" && ac_dir=.
if test -f $ac_dir/$ac_word; then
- ac_cv_prog_CONFIGURED_AR_FOR_TARGET="${ncn_target_tool_prefix}ar"
+ ac_cv_prog_AR_FOR_TARGET="${ncn_target_tool_prefix}ar"
break
fi
done
IFS="$ac_save_ifs"
fi
fi
-CONFIGURED_AR_FOR_TARGET="$ac_cv_prog_CONFIGURED_AR_FOR_TARGET"
-if test -n "$CONFIGURED_AR_FOR_TARGET"; then
- echo "$ac_t""$CONFIGURED_AR_FOR_TARGET" 1>&6
+AR_FOR_TARGET="$ac_cv_prog_AR_FOR_TARGET"
+if test -n "$AR_FOR_TARGET"; then
+ echo "$ac_t""$AR_FOR_TARGET" 1>&6
else
echo "$ac_t""no" 1>&6
fi
fi
-if test -z "$ac_cv_prog_CONFIGURED_AR_FOR_TARGET" ; then
+if test -z "$ac_cv_prog_AR_FOR_TARGET" ; then
if test $build = $target ; then
- ncn_cv_CONFIGURED_AR_FOR_TARGET=$CONFIGURED_AR_FOR_TARGET
+ ncn_cv_AR_FOR_TARGET=$AR_FOR_TARGET
# Extract the first word of "ar", so it can be a program name with args.
set dummy ar; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:4285: checking for $ac_word" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_ncn_cv_CONFIGURED_AR_FOR_TARGET'+set}'`\" = set"; then
+echo "configure:4198: checking for $ac_word" >&5
+if eval "test \"`echo '$''{'ac_cv_prog_ncn_cv_AR_FOR_TARGET'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
- if test -n "$ncn_cv_CONFIGURED_AR_FOR_TARGET"; then
- ac_cv_prog_ncn_cv_CONFIGURED_AR_FOR_TARGET="$ncn_cv_CONFIGURED_AR_FOR_TARGET" # Let the user override the test.
+ if test -n "$ncn_cv_AR_FOR_TARGET"; then
+ ac_cv_prog_ncn_cv_AR_FOR_TARGET="$ncn_cv_AR_FOR_TARGET" # Let the user override the test.
else
IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":"
ac_dummy="$PATH"
for ac_dir in $ac_dummy; do
test -z "$ac_dir" && ac_dir=.
if test -f $ac_dir/$ac_word; then
- ac_cv_prog_ncn_cv_CONFIGURED_AR_FOR_TARGET="ar"
+ ac_cv_prog_ncn_cv_AR_FOR_TARGET="ar"
break
fi
done
IFS="$ac_save_ifs"
- test -z "$ac_cv_prog_ncn_cv_CONFIGURED_AR_FOR_TARGET" && ac_cv_prog_ncn_cv_CONFIGURED_AR_FOR_TARGET="ar"
+ test -z "$ac_cv_prog_ncn_cv_AR_FOR_TARGET" && ac_cv_prog_ncn_cv_AR_FOR_TARGET="ar"
fi
fi
-ncn_cv_CONFIGURED_AR_FOR_TARGET="$ac_cv_prog_ncn_cv_CONFIGURED_AR_FOR_TARGET"
-if test -n "$ncn_cv_CONFIGURED_AR_FOR_TARGET"; then
- echo "$ac_t""$ncn_cv_CONFIGURED_AR_FOR_TARGET" 1>&6
+ncn_cv_AR_FOR_TARGET="$ac_cv_prog_ncn_cv_AR_FOR_TARGET"
+if test -n "$ncn_cv_AR_FOR_TARGET"; then
+ echo "$ac_t""$ncn_cv_AR_FOR_TARGET" 1>&6
else
echo "$ac_t""no" 1>&6
fi
- CONFIGURED_AR_FOR_TARGET=$ncn_cv_CONFIGURED_AR_FOR_TARGET
+ AR_FOR_TARGET=$ncn_cv_AR_FOR_TARGET
else
- CONFIGURED_AR_FOR_TARGET="${ncn_target_tool_prefix}ar"
+ AR_FOR_TARGET="${ncn_target_tool_prefix}ar"
fi
else
- CONFIGURED_AR_FOR_TARGET="$ac_cv_prog_CONFIGURED_AR_FOR_TARGET"
+ AR_FOR_TARGET="$ac_cv_prog_AR_FOR_TARGET"
fi
if test -n "$ncn_target_tool_prefix"; then
# Extract the first word of "${ncn_target_tool_prefix}as", so it can be a program name with args.
set dummy ${ncn_target_tool_prefix}as; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:4324: checking for $ac_word" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_CONFIGURED_AS_FOR_TARGET'+set}'`\" = set"; then
+echo "configure:4237: checking for $ac_word" >&5
+if eval "test \"`echo '$''{'ac_cv_prog_AS_FOR_TARGET'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
- if test -n "$CONFIGURED_AS_FOR_TARGET"; then
- ac_cv_prog_CONFIGURED_AS_FOR_TARGET="$CONFIGURED_AS_FOR_TARGET" # Let the user override the test.
+ if test -n "$AS_FOR_TARGET"; then
+ ac_cv_prog_AS_FOR_TARGET="$AS_FOR_TARGET" # Let the user override the test.
else
IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":"
ac_dummy="$PATH"
for ac_dir in $ac_dummy; do
test -z "$ac_dir" && ac_dir=.
if test -f $ac_dir/$ac_word; then
- ac_cv_prog_CONFIGURED_AS_FOR_TARGET="${ncn_target_tool_prefix}as"
+ ac_cv_prog_AS_FOR_TARGET="${ncn_target_tool_prefix}as"
break
fi
done
IFS="$ac_save_ifs"
fi
fi
-CONFIGURED_AS_FOR_TARGET="$ac_cv_prog_CONFIGURED_AS_FOR_TARGET"
-if test -n "$CONFIGURED_AS_FOR_TARGET"; then
- echo "$ac_t""$CONFIGURED_AS_FOR_TARGET" 1>&6
+AS_FOR_TARGET="$ac_cv_prog_AS_FOR_TARGET"
+if test -n "$AS_FOR_TARGET"; then
+ echo "$ac_t""$AS_FOR_TARGET" 1>&6
else
echo "$ac_t""no" 1>&6
fi
fi
-if test -z "$ac_cv_prog_CONFIGURED_AS_FOR_TARGET" ; then
+if test -z "$ac_cv_prog_AS_FOR_TARGET" ; then
if test $build = $target ; then
- ncn_cv_CONFIGURED_AS_FOR_TARGET=$CONFIGURED_AS_FOR_TARGET
+ ncn_cv_AS_FOR_TARGET=$AS_FOR_TARGET
# Extract the first word of "as", so it can be a program name with args.
set dummy as; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:4357: checking for $ac_word" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_ncn_cv_CONFIGURED_AS_FOR_TARGET'+set}'`\" = set"; then
+echo "configure:4270: checking for $ac_word" >&5
+if eval "test \"`echo '$''{'ac_cv_prog_ncn_cv_AS_FOR_TARGET'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
- if test -n "$ncn_cv_CONFIGURED_AS_FOR_TARGET"; then
- ac_cv_prog_ncn_cv_CONFIGURED_AS_FOR_TARGET="$ncn_cv_CONFIGURED_AS_FOR_TARGET" # Let the user override the test.
+ if test -n "$ncn_cv_AS_FOR_TARGET"; then
+ ac_cv_prog_ncn_cv_AS_FOR_TARGET="$ncn_cv_AS_FOR_TARGET" # Let the user override the test.
else
IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":"
ac_dummy="$PATH"
for ac_dir in $ac_dummy; do
test -z "$ac_dir" && ac_dir=.
if test -f $ac_dir/$ac_word; then
- ac_cv_prog_ncn_cv_CONFIGURED_AS_FOR_TARGET="as"
+ ac_cv_prog_ncn_cv_AS_FOR_TARGET="as"
break
fi
done
IFS="$ac_save_ifs"
- test -z "$ac_cv_prog_ncn_cv_CONFIGURED_AS_FOR_TARGET" && ac_cv_prog_ncn_cv_CONFIGURED_AS_FOR_TARGET="as"
+ test -z "$ac_cv_prog_ncn_cv_AS_FOR_TARGET" && ac_cv_prog_ncn_cv_AS_FOR_TARGET="as"
fi
fi
-ncn_cv_CONFIGURED_AS_FOR_TARGET="$ac_cv_prog_ncn_cv_CONFIGURED_AS_FOR_TARGET"
-if test -n "$ncn_cv_CONFIGURED_AS_FOR_TARGET"; then
- echo "$ac_t""$ncn_cv_CONFIGURED_AS_FOR_TARGET" 1>&6
+ncn_cv_AS_FOR_TARGET="$ac_cv_prog_ncn_cv_AS_FOR_TARGET"
+if test -n "$ncn_cv_AS_FOR_TARGET"; then
+ echo "$ac_t""$ncn_cv_AS_FOR_TARGET" 1>&6
else
echo "$ac_t""no" 1>&6
fi
- CONFIGURED_AS_FOR_TARGET=$ncn_cv_CONFIGURED_AS_FOR_TARGET
+ AS_FOR_TARGET=$ncn_cv_AS_FOR_TARGET
else
- CONFIGURED_AS_FOR_TARGET="${ncn_target_tool_prefix}as"
+ AS_FOR_TARGET="${ncn_target_tool_prefix}as"
fi
else
- CONFIGURED_AS_FOR_TARGET="$ac_cv_prog_CONFIGURED_AS_FOR_TARGET"
+ AS_FOR_TARGET="$ac_cv_prog_AS_FOR_TARGET"
+fi
+
+ if test -n "$ncn_target_tool_prefix"; then
+ # Extract the first word of "${ncn_target_tool_prefix}cc", so it can be a program name with args.
+set dummy ${ncn_target_tool_prefix}cc; ac_word=$2
+echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
+echo "configure:4309: checking for $ac_word" >&5
+if eval "test \"`echo '$''{'ac_cv_prog_CC_FOR_TARGET'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+ if test -n "$CC_FOR_TARGET"; then
+ ac_cv_prog_CC_FOR_TARGET="$CC_FOR_TARGET" # Let the user override the test.
+else
+ IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":"
+ ac_dummy="$PATH"
+ for ac_dir in $ac_dummy; do
+ test -z "$ac_dir" && ac_dir=.
+ if test -f $ac_dir/$ac_word; then
+ ac_cv_prog_CC_FOR_TARGET="${ncn_target_tool_prefix}cc"
+ break
+ fi
+ done
+ IFS="$ac_save_ifs"
+fi
+fi
+CC_FOR_TARGET="$ac_cv_prog_CC_FOR_TARGET"
+if test -n "$CC_FOR_TARGET"; then
+ echo "$ac_t""$CC_FOR_TARGET" 1>&6
+else
+ echo "$ac_t""no" 1>&6
+fi
+
+fi
+if test -z "$ac_cv_prog_CC_FOR_TARGET" ; then
+ if test $build = $target ; then
+ ncn_cv_CC_FOR_TARGET=$CC_FOR_TARGET
+ # Extract the first word of "cc", so it can be a program name with args.
+set dummy cc; ac_word=$2
+echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
+echo "configure:4342: checking for $ac_word" >&5
+if eval "test \"`echo '$''{'ac_cv_prog_ncn_cv_CC_FOR_TARGET'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+ if test -n "$ncn_cv_CC_FOR_TARGET"; then
+ ac_cv_prog_ncn_cv_CC_FOR_TARGET="$ncn_cv_CC_FOR_TARGET" # Let the user override the test.
+else
+ IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":"
+ ac_dummy="$PATH"
+ for ac_dir in $ac_dummy; do
+ test -z "$ac_dir" && ac_dir=.
+ if test -f $ac_dir/$ac_word; then
+ ac_cv_prog_ncn_cv_CC_FOR_TARGET="cc"
+ break
+ fi
+ done
+ IFS="$ac_save_ifs"
+ test -z "$ac_cv_prog_ncn_cv_CC_FOR_TARGET" && ac_cv_prog_ncn_cv_CC_FOR_TARGET="cc"
+fi
+fi
+ncn_cv_CC_FOR_TARGET="$ac_cv_prog_ncn_cv_CC_FOR_TARGET"
+if test -n "$ncn_cv_CC_FOR_TARGET"; then
+ echo "$ac_t""$ncn_cv_CC_FOR_TARGET" 1>&6
+else
+ echo "$ac_t""no" 1>&6
+fi
+
+ CC_FOR_TARGET=$ncn_cv_CC_FOR_TARGET
+ else
+ CC_FOR_TARGET="${ncn_target_tool_prefix}cc"
+ fi
+else
+ CC_FOR_TARGET="$ac_cv_prog_CC_FOR_TARGET"
+fi
+
+ if test -n "$ncn_target_tool_prefix"; then
+ # Extract the first word of "${ncn_target_tool_prefix}c++", so it can be a program name with args.
+set dummy ${ncn_target_tool_prefix}c++; ac_word=$2
+echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
+echo "configure:4381: checking for $ac_word" >&5
+if eval "test \"`echo '$''{'ac_cv_prog_CXX_FOR_TARGET'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+ if test -n "$CXX_FOR_TARGET"; then
+ ac_cv_prog_CXX_FOR_TARGET="$CXX_FOR_TARGET" # Let the user override the test.
+else
+ IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":"
+ ac_dummy="$PATH"
+ for ac_dir in $ac_dummy; do
+ test -z "$ac_dir" && ac_dir=.
+ if test -f $ac_dir/$ac_word; then
+ ac_cv_prog_CXX_FOR_TARGET="${ncn_target_tool_prefix}c++"
+ break
+ fi
+ done
+ IFS="$ac_save_ifs"
+fi
+fi
+CXX_FOR_TARGET="$ac_cv_prog_CXX_FOR_TARGET"
+if test -n "$CXX_FOR_TARGET"; then
+ echo "$ac_t""$CXX_FOR_TARGET" 1>&6
+else
+ echo "$ac_t""no" 1>&6
+fi
+
+fi
+if test -z "$ac_cv_prog_CXX_FOR_TARGET" ; then
+ if test $build = $target ; then
+ ncn_cv_CXX_FOR_TARGET=$CXX_FOR_TARGET
+ # Extract the first word of "c++", so it can be a program name with args.
+set dummy c++; ac_word=$2
+echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
+echo "configure:4414: checking for $ac_word" >&5
+if eval "test \"`echo '$''{'ac_cv_prog_ncn_cv_CXX_FOR_TARGET'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+ if test -n "$ncn_cv_CXX_FOR_TARGET"; then
+ ac_cv_prog_ncn_cv_CXX_FOR_TARGET="$ncn_cv_CXX_FOR_TARGET" # Let the user override the test.
+else
+ IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":"
+ ac_dummy="$PATH"
+ for ac_dir in $ac_dummy; do
+ test -z "$ac_dir" && ac_dir=.
+ if test -f $ac_dir/$ac_word; then
+ ac_cv_prog_ncn_cv_CXX_FOR_TARGET="c++"
+ break
+ fi
+ done
+ IFS="$ac_save_ifs"
+ test -z "$ac_cv_prog_ncn_cv_CXX_FOR_TARGET" && ac_cv_prog_ncn_cv_CXX_FOR_TARGET="c++"
+fi
+fi
+ncn_cv_CXX_FOR_TARGET="$ac_cv_prog_ncn_cv_CXX_FOR_TARGET"
+if test -n "$ncn_cv_CXX_FOR_TARGET"; then
+ echo "$ac_t""$ncn_cv_CXX_FOR_TARGET" 1>&6
+else
+ echo "$ac_t""no" 1>&6
+fi
+
+ CXX_FOR_TARGET=$ncn_cv_CXX_FOR_TARGET
+ else
+ CXX_FOR_TARGET="${ncn_target_tool_prefix}c++"
+ fi
+else
+ CXX_FOR_TARGET="$ac_cv_prog_CXX_FOR_TARGET"
fi
if test -n "$ncn_target_tool_prefix"; then
# Extract the first word of "${ncn_target_tool_prefix}dlltool", so it can be a program name with args.
set dummy ${ncn_target_tool_prefix}dlltool; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:4396: checking for $ac_word" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_CONFIGURED_DLLTOOL_FOR_TARGET'+set}'`\" = set"; then
+echo "configure:4453: checking for $ac_word" >&5
+if eval "test \"`echo '$''{'ac_cv_prog_DLLTOOL_FOR_TARGET'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
- if test -n "$CONFIGURED_DLLTOOL_FOR_TARGET"; then
- ac_cv_prog_CONFIGURED_DLLTOOL_FOR_TARGET="$CONFIGURED_DLLTOOL_FOR_TARGET" # Let the user override the test.
+ if test -n "$DLLTOOL_FOR_TARGET"; then
+ ac_cv_prog_DLLTOOL_FOR_TARGET="$DLLTOOL_FOR_TARGET" # Let the user override the test.
else
IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":"
ac_dummy="$PATH"
for ac_dir in $ac_dummy; do
test -z "$ac_dir" && ac_dir=.
if test -f $ac_dir/$ac_word; then
- ac_cv_prog_CONFIGURED_DLLTOOL_FOR_TARGET="${ncn_target_tool_prefix}dlltool"
+ ac_cv_prog_DLLTOOL_FOR_TARGET="${ncn_target_tool_prefix}dlltool"
break
fi
done
IFS="$ac_save_ifs"
fi
fi
-CONFIGURED_DLLTOOL_FOR_TARGET="$ac_cv_prog_CONFIGURED_DLLTOOL_FOR_TARGET"
-if test -n "$CONFIGURED_DLLTOOL_FOR_TARGET"; then
- echo "$ac_t""$CONFIGURED_DLLTOOL_FOR_TARGET" 1>&6
+DLLTOOL_FOR_TARGET="$ac_cv_prog_DLLTOOL_FOR_TARGET"
+if test -n "$DLLTOOL_FOR_TARGET"; then
+ echo "$ac_t""$DLLTOOL_FOR_TARGET" 1>&6
else
echo "$ac_t""no" 1>&6
fi
fi
-if test -z "$ac_cv_prog_CONFIGURED_DLLTOOL_FOR_TARGET" ; then
+if test -z "$ac_cv_prog_DLLTOOL_FOR_TARGET" ; then
if test $build = $target ; then
- ncn_cv_CONFIGURED_DLLTOOL_FOR_TARGET=$CONFIGURED_DLLTOOL_FOR_TARGET
+ ncn_cv_DLLTOOL_FOR_TARGET=$DLLTOOL_FOR_TARGET
# Extract the first word of "dlltool", so it can be a program name with args.
set dummy dlltool; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:4429: checking for $ac_word" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_ncn_cv_CONFIGURED_DLLTOOL_FOR_TARGET'+set}'`\" = set"; then
+echo "configure:4486: checking for $ac_word" >&5
+if eval "test \"`echo '$''{'ac_cv_prog_ncn_cv_DLLTOOL_FOR_TARGET'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
- if test -n "$ncn_cv_CONFIGURED_DLLTOOL_FOR_TARGET"; then
- ac_cv_prog_ncn_cv_CONFIGURED_DLLTOOL_FOR_TARGET="$ncn_cv_CONFIGURED_DLLTOOL_FOR_TARGET" # Let the user override the test.
+ if test -n "$ncn_cv_DLLTOOL_FOR_TARGET"; then
+ ac_cv_prog_ncn_cv_DLLTOOL_FOR_TARGET="$ncn_cv_DLLTOOL_FOR_TARGET" # Let the user override the test.
else
IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":"
ac_dummy="$PATH"
for ac_dir in $ac_dummy; do
test -z "$ac_dir" && ac_dir=.
if test -f $ac_dir/$ac_word; then
- ac_cv_prog_ncn_cv_CONFIGURED_DLLTOOL_FOR_TARGET="dlltool"
+ ac_cv_prog_ncn_cv_DLLTOOL_FOR_TARGET="dlltool"
break
fi
done
IFS="$ac_save_ifs"
- test -z "$ac_cv_prog_ncn_cv_CONFIGURED_DLLTOOL_FOR_TARGET" && ac_cv_prog_ncn_cv_CONFIGURED_DLLTOOL_FOR_TARGET="dlltool"
+ test -z "$ac_cv_prog_ncn_cv_DLLTOOL_FOR_TARGET" && ac_cv_prog_ncn_cv_DLLTOOL_FOR_TARGET="dlltool"
fi
fi
-ncn_cv_CONFIGURED_DLLTOOL_FOR_TARGET="$ac_cv_prog_ncn_cv_CONFIGURED_DLLTOOL_FOR_TARGET"
-if test -n "$ncn_cv_CONFIGURED_DLLTOOL_FOR_TARGET"; then
- echo "$ac_t""$ncn_cv_CONFIGURED_DLLTOOL_FOR_TARGET" 1>&6
+ncn_cv_DLLTOOL_FOR_TARGET="$ac_cv_prog_ncn_cv_DLLTOOL_FOR_TARGET"
+if test -n "$ncn_cv_DLLTOOL_FOR_TARGET"; then
+ echo "$ac_t""$ncn_cv_DLLTOOL_FOR_TARGET" 1>&6
else
echo "$ac_t""no" 1>&6
fi
- CONFIGURED_DLLTOOL_FOR_TARGET=$ncn_cv_CONFIGURED_DLLTOOL_FOR_TARGET
+ DLLTOOL_FOR_TARGET=$ncn_cv_DLLTOOL_FOR_TARGET
else
- CONFIGURED_DLLTOOL_FOR_TARGET="${ncn_target_tool_prefix}dlltool"
+ DLLTOOL_FOR_TARGET="${ncn_target_tool_prefix}dlltool"
fi
else
- CONFIGURED_DLLTOOL_FOR_TARGET="$ac_cv_prog_CONFIGURED_DLLTOOL_FOR_TARGET"
+ DLLTOOL_FOR_TARGET="$ac_cv_prog_DLLTOOL_FOR_TARGET"
+fi
+
+ if test -n "$ncn_target_tool_prefix"; then
+ # Extract the first word of "${ncn_target_tool_prefix}gcc", so it can be a program name with args.
+set dummy ${ncn_target_tool_prefix}gcc; ac_word=$2
+echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
+echo "configure:4525: checking for $ac_word" >&5
+if eval "test \"`echo '$''{'ac_cv_prog_GCC_FOR_TARGET'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+ if test -n "$GCC_FOR_TARGET"; then
+ ac_cv_prog_GCC_FOR_TARGET="$GCC_FOR_TARGET" # Let the user override the test.
+else
+ IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":"
+ ac_dummy="$PATH"
+ for ac_dir in $ac_dummy; do
+ test -z "$ac_dir" && ac_dir=.
+ if test -f $ac_dir/$ac_word; then
+ ac_cv_prog_GCC_FOR_TARGET="${ncn_target_tool_prefix}gcc"
+ break
+ fi
+ done
+ IFS="$ac_save_ifs"
+fi
+fi
+GCC_FOR_TARGET="$ac_cv_prog_GCC_FOR_TARGET"
+if test -n "$GCC_FOR_TARGET"; then
+ echo "$ac_t""$GCC_FOR_TARGET" 1>&6
+else
+ echo "$ac_t""no" 1>&6
+fi
+
+fi
+if test -z "$ac_cv_prog_GCC_FOR_TARGET" ; then
+ if test $build = $target ; then
+ ncn_cv_GCC_FOR_TARGET=$GCC_FOR_TARGET
+ # Extract the first word of "gcc", so it can be a program name with args.
+set dummy gcc; ac_word=$2
+echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
+echo "configure:4558: checking for $ac_word" >&5
+if eval "test \"`echo '$''{'ac_cv_prog_ncn_cv_GCC_FOR_TARGET'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+ if test -n "$ncn_cv_GCC_FOR_TARGET"; then
+ ac_cv_prog_ncn_cv_GCC_FOR_TARGET="$ncn_cv_GCC_FOR_TARGET" # Let the user override the test.
+else
+ IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":"
+ ac_dummy="$PATH"
+ for ac_dir in $ac_dummy; do
+ test -z "$ac_dir" && ac_dir=.
+ if test -f $ac_dir/$ac_word; then
+ ac_cv_prog_ncn_cv_GCC_FOR_TARGET="gcc"
+ break
+ fi
+ done
+ IFS="$ac_save_ifs"
+ test -z "$ac_cv_prog_ncn_cv_GCC_FOR_TARGET" && ac_cv_prog_ncn_cv_GCC_FOR_TARGET="${CC_FOR_TARGET}"
+fi
+fi
+ncn_cv_GCC_FOR_TARGET="$ac_cv_prog_ncn_cv_GCC_FOR_TARGET"
+if test -n "$ncn_cv_GCC_FOR_TARGET"; then
+ echo "$ac_t""$ncn_cv_GCC_FOR_TARGET" 1>&6
+else
+ echo "$ac_t""no" 1>&6
+fi
+
+ GCC_FOR_TARGET=$ncn_cv_GCC_FOR_TARGET
+ else
+ GCC_FOR_TARGET="${CC_FOR_TARGET}"
+ fi
+else
+ GCC_FOR_TARGET="$ac_cv_prog_GCC_FOR_TARGET"
+fi
+
+ if test -n "$ncn_target_tool_prefix"; then
+ # Extract the first word of "${ncn_target_tool_prefix}gcj", so it can be a program name with args.
+set dummy ${ncn_target_tool_prefix}gcj; ac_word=$2
+echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
+echo "configure:4597: checking for $ac_word" >&5
+if eval "test \"`echo '$''{'ac_cv_prog_GCJ_FOR_TARGET'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+ if test -n "$GCJ_FOR_TARGET"; then
+ ac_cv_prog_GCJ_FOR_TARGET="$GCJ_FOR_TARGET" # Let the user override the test.
+else
+ IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":"
+ ac_dummy="$PATH"
+ for ac_dir in $ac_dummy; do
+ test -z "$ac_dir" && ac_dir=.
+ if test -f $ac_dir/$ac_word; then
+ ac_cv_prog_GCJ_FOR_TARGET="${ncn_target_tool_prefix}gcj"
+ break
+ fi
+ done
+ IFS="$ac_save_ifs"
+fi
+fi
+GCJ_FOR_TARGET="$ac_cv_prog_GCJ_FOR_TARGET"
+if test -n "$GCJ_FOR_TARGET"; then
+ echo "$ac_t""$GCJ_FOR_TARGET" 1>&6
+else
+ echo "$ac_t""no" 1>&6
+fi
+
+fi
+if test -z "$ac_cv_prog_GCJ_FOR_TARGET" ; then
+ if test $build = $target ; then
+ ncn_cv_GCJ_FOR_TARGET=$GCJ_FOR_TARGET
+ # Extract the first word of "gcj", so it can be a program name with args.
+set dummy gcj; ac_word=$2
+echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
+echo "configure:4630: checking for $ac_word" >&5
+if eval "test \"`echo '$''{'ac_cv_prog_ncn_cv_GCJ_FOR_TARGET'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+ if test -n "$ncn_cv_GCJ_FOR_TARGET"; then
+ ac_cv_prog_ncn_cv_GCJ_FOR_TARGET="$ncn_cv_GCJ_FOR_TARGET" # Let the user override the test.
+else
+ IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":"
+ ac_dummy="$PATH"
+ for ac_dir in $ac_dummy; do
+ test -z "$ac_dir" && ac_dir=.
+ if test -f $ac_dir/$ac_word; then
+ ac_cv_prog_ncn_cv_GCJ_FOR_TARGET="gcj"
+ break
+ fi
+ done
+ IFS="$ac_save_ifs"
+ test -z "$ac_cv_prog_ncn_cv_GCJ_FOR_TARGET" && ac_cv_prog_ncn_cv_GCJ_FOR_TARGET="gcj"
+fi
+fi
+ncn_cv_GCJ_FOR_TARGET="$ac_cv_prog_ncn_cv_GCJ_FOR_TARGET"
+if test -n "$ncn_cv_GCJ_FOR_TARGET"; then
+ echo "$ac_t""$ncn_cv_GCJ_FOR_TARGET" 1>&6
+else
+ echo "$ac_t""no" 1>&6
+fi
+
+ GCJ_FOR_TARGET=$ncn_cv_GCJ_FOR_TARGET
+ else
+ GCJ_FOR_TARGET="${ncn_target_tool_prefix}gcj"
+ fi
+else
+ GCJ_FOR_TARGET="$ac_cv_prog_GCJ_FOR_TARGET"
+fi
+
+ if test -n "$ncn_target_tool_prefix"; then
+ # Extract the first word of "${ncn_target_tool_prefix}gfortran", so it can be a program name with args.
+set dummy ${ncn_target_tool_prefix}gfortran; ac_word=$2
+echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
+echo "configure:4669: checking for $ac_word" >&5
+if eval "test \"`echo '$''{'ac_cv_prog_GFORTRAN_FOR_TARGET'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+ if test -n "$GFORTRAN_FOR_TARGET"; then
+ ac_cv_prog_GFORTRAN_FOR_TARGET="$GFORTRAN_FOR_TARGET" # Let the user override the test.
+else
+ IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":"
+ ac_dummy="$PATH"
+ for ac_dir in $ac_dummy; do
+ test -z "$ac_dir" && ac_dir=.
+ if test -f $ac_dir/$ac_word; then
+ ac_cv_prog_GFORTRAN_FOR_TARGET="${ncn_target_tool_prefix}gfortran"
+ break
+ fi
+ done
+ IFS="$ac_save_ifs"
+fi
+fi
+GFORTRAN_FOR_TARGET="$ac_cv_prog_GFORTRAN_FOR_TARGET"
+if test -n "$GFORTRAN_FOR_TARGET"; then
+ echo "$ac_t""$GFORTRAN_FOR_TARGET" 1>&6
+else
+ echo "$ac_t""no" 1>&6
+fi
+
+fi
+if test -z "$ac_cv_prog_GFORTRAN_FOR_TARGET" ; then
+ if test $build = $target ; then
+ ncn_cv_GFORTRAN_FOR_TARGET=$GFORTRAN_FOR_TARGET
+ # Extract the first word of "gfortran", so it can be a program name with args.
+set dummy gfortran; ac_word=$2
+echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
+echo "configure:4702: checking for $ac_word" >&5
+if eval "test \"`echo '$''{'ac_cv_prog_ncn_cv_GFORTRAN_FOR_TARGET'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+ if test -n "$ncn_cv_GFORTRAN_FOR_TARGET"; then
+ ac_cv_prog_ncn_cv_GFORTRAN_FOR_TARGET="$ncn_cv_GFORTRAN_FOR_TARGET" # Let the user override the test.
+else
+ IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":"
+ ac_dummy="$PATH"
+ for ac_dir in $ac_dummy; do
+ test -z "$ac_dir" && ac_dir=.
+ if test -f $ac_dir/$ac_word; then
+ ac_cv_prog_ncn_cv_GFORTRAN_FOR_TARGET="gfortran"
+ break
+ fi
+ done
+ IFS="$ac_save_ifs"
+ test -z "$ac_cv_prog_ncn_cv_GFORTRAN_FOR_TARGET" && ac_cv_prog_ncn_cv_GFORTRAN_FOR_TARGET="gfortran"
+fi
+fi
+ncn_cv_GFORTRAN_FOR_TARGET="$ac_cv_prog_ncn_cv_GFORTRAN_FOR_TARGET"
+if test -n "$ncn_cv_GFORTRAN_FOR_TARGET"; then
+ echo "$ac_t""$ncn_cv_GFORTRAN_FOR_TARGET" 1>&6
+else
+ echo "$ac_t""no" 1>&6
+fi
+
+ GFORTRAN_FOR_TARGET=$ncn_cv_GFORTRAN_FOR_TARGET
+ else
+ GFORTRAN_FOR_TARGET="${ncn_target_tool_prefix}gfortran"
+ fi
+else
+ GFORTRAN_FOR_TARGET="$ac_cv_prog_GFORTRAN_FOR_TARGET"
fi
if test -n "$ncn_target_tool_prefix"; then
# Extract the first word of "${ncn_target_tool_prefix}ld", so it can be a program name with args.
set dummy ${ncn_target_tool_prefix}ld; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:4468: checking for $ac_word" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_CONFIGURED_LD_FOR_TARGET'+set}'`\" = set"; then
+echo "configure:4741: checking for $ac_word" >&5
+if eval "test \"`echo '$''{'ac_cv_prog_LD_FOR_TARGET'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
- if test -n "$CONFIGURED_LD_FOR_TARGET"; then
- ac_cv_prog_CONFIGURED_LD_FOR_TARGET="$CONFIGURED_LD_FOR_TARGET" # Let the user override the test.
+ if test -n "$LD_FOR_TARGET"; then
+ ac_cv_prog_LD_FOR_TARGET="$LD_FOR_TARGET" # Let the user override the test.
else
IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":"
ac_dummy="$PATH"
for ac_dir in $ac_dummy; do
test -z "$ac_dir" && ac_dir=.
if test -f $ac_dir/$ac_word; then
- ac_cv_prog_CONFIGURED_LD_FOR_TARGET="${ncn_target_tool_prefix}ld"
+ ac_cv_prog_LD_FOR_TARGET="${ncn_target_tool_prefix}ld"
break
fi
done
IFS="$ac_save_ifs"
fi
fi
-CONFIGURED_LD_FOR_TARGET="$ac_cv_prog_CONFIGURED_LD_FOR_TARGET"
-if test -n "$CONFIGURED_LD_FOR_TARGET"; then
- echo "$ac_t""$CONFIGURED_LD_FOR_TARGET" 1>&6
+LD_FOR_TARGET="$ac_cv_prog_LD_FOR_TARGET"
+if test -n "$LD_FOR_TARGET"; then
+ echo "$ac_t""$LD_FOR_TARGET" 1>&6
else
echo "$ac_t""no" 1>&6
fi
fi
-if test -z "$ac_cv_prog_CONFIGURED_LD_FOR_TARGET" ; then
+if test -z "$ac_cv_prog_LD_FOR_TARGET" ; then
if test $build = $target ; then
- ncn_cv_CONFIGURED_LD_FOR_TARGET=$CONFIGURED_LD_FOR_TARGET
+ ncn_cv_LD_FOR_TARGET=$LD_FOR_TARGET
# Extract the first word of "ld", so it can be a program name with args.
set dummy ld; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:4501: checking for $ac_word" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_ncn_cv_CONFIGURED_LD_FOR_TARGET'+set}'`\" = set"; then
+echo "configure:4774: checking for $ac_word" >&5
+if eval "test \"`echo '$''{'ac_cv_prog_ncn_cv_LD_FOR_TARGET'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
- if test -n "$ncn_cv_CONFIGURED_LD_FOR_TARGET"; then
- ac_cv_prog_ncn_cv_CONFIGURED_LD_FOR_TARGET="$ncn_cv_CONFIGURED_LD_FOR_TARGET" # Let the user override the test.
+ if test -n "$ncn_cv_LD_FOR_TARGET"; then
+ ac_cv_prog_ncn_cv_LD_FOR_TARGET="$ncn_cv_LD_FOR_TARGET" # Let the user override the test.
else
IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":"
ac_dummy="$PATH"
for ac_dir in $ac_dummy; do
test -z "$ac_dir" && ac_dir=.
if test -f $ac_dir/$ac_word; then
- ac_cv_prog_ncn_cv_CONFIGURED_LD_FOR_TARGET="ld"
+ ac_cv_prog_ncn_cv_LD_FOR_TARGET="ld"
break
fi
done
IFS="$ac_save_ifs"
- test -z "$ac_cv_prog_ncn_cv_CONFIGURED_LD_FOR_TARGET" && ac_cv_prog_ncn_cv_CONFIGURED_LD_FOR_TARGET="ld"
+ test -z "$ac_cv_prog_ncn_cv_LD_FOR_TARGET" && ac_cv_prog_ncn_cv_LD_FOR_TARGET="ld"
fi
fi
-ncn_cv_CONFIGURED_LD_FOR_TARGET="$ac_cv_prog_ncn_cv_CONFIGURED_LD_FOR_TARGET"
-if test -n "$ncn_cv_CONFIGURED_LD_FOR_TARGET"; then
- echo "$ac_t""$ncn_cv_CONFIGURED_LD_FOR_TARGET" 1>&6
+ncn_cv_LD_FOR_TARGET="$ac_cv_prog_ncn_cv_LD_FOR_TARGET"
+if test -n "$ncn_cv_LD_FOR_TARGET"; then
+ echo "$ac_t""$ncn_cv_LD_FOR_TARGET" 1>&6
else
echo "$ac_t""no" 1>&6
fi
- CONFIGURED_LD_FOR_TARGET=$ncn_cv_CONFIGURED_LD_FOR_TARGET
+ LD_FOR_TARGET=$ncn_cv_LD_FOR_TARGET
else
- CONFIGURED_LD_FOR_TARGET="${ncn_target_tool_prefix}ld"
+ LD_FOR_TARGET="${ncn_target_tool_prefix}ld"
fi
else
- CONFIGURED_LD_FOR_TARGET="$ac_cv_prog_CONFIGURED_LD_FOR_TARGET"
+ LD_FOR_TARGET="$ac_cv_prog_LD_FOR_TARGET"
fi
if test -n "$ncn_target_tool_prefix"; then
# Extract the first word of "${ncn_target_tool_prefix}nm", so it can be a program name with args.
set dummy ${ncn_target_tool_prefix}nm; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:4540: checking for $ac_word" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_CONFIGURED_NM_FOR_TARGET'+set}'`\" = set"; then
+echo "configure:4813: checking for $ac_word" >&5
+if eval "test \"`echo '$''{'ac_cv_prog_NM_FOR_TARGET'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
- if test -n "$CONFIGURED_NM_FOR_TARGET"; then
- ac_cv_prog_CONFIGURED_NM_FOR_TARGET="$CONFIGURED_NM_FOR_TARGET" # Let the user override the test.
+ if test -n "$NM_FOR_TARGET"; then
+ ac_cv_prog_NM_FOR_TARGET="$NM_FOR_TARGET" # Let the user override the test.
else
IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":"
ac_dummy="$PATH"
for ac_dir in $ac_dummy; do
test -z "$ac_dir" && ac_dir=.
if test -f $ac_dir/$ac_word; then
- ac_cv_prog_CONFIGURED_NM_FOR_TARGET="${ncn_target_tool_prefix}nm"
+ ac_cv_prog_NM_FOR_TARGET="${ncn_target_tool_prefix}nm"
break
fi
done
IFS="$ac_save_ifs"
fi
fi
-CONFIGURED_NM_FOR_TARGET="$ac_cv_prog_CONFIGURED_NM_FOR_TARGET"
-if test -n "$CONFIGURED_NM_FOR_TARGET"; then
- echo "$ac_t""$CONFIGURED_NM_FOR_TARGET" 1>&6
+NM_FOR_TARGET="$ac_cv_prog_NM_FOR_TARGET"
+if test -n "$NM_FOR_TARGET"; then
+ echo "$ac_t""$NM_FOR_TARGET" 1>&6
else
echo "$ac_t""no" 1>&6
fi
fi
-if test -z "$ac_cv_prog_CONFIGURED_NM_FOR_TARGET" ; then
+if test -z "$ac_cv_prog_NM_FOR_TARGET" ; then
if test $build = $target ; then
- ncn_cv_CONFIGURED_NM_FOR_TARGET=$CONFIGURED_NM_FOR_TARGET
+ ncn_cv_NM_FOR_TARGET=$NM_FOR_TARGET
# Extract the first word of "nm", so it can be a program name with args.
set dummy nm; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:4573: checking for $ac_word" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_ncn_cv_CONFIGURED_NM_FOR_TARGET'+set}'`\" = set"; then
+echo "configure:4846: checking for $ac_word" >&5
+if eval "test \"`echo '$''{'ac_cv_prog_ncn_cv_NM_FOR_TARGET'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
- if test -n "$ncn_cv_CONFIGURED_NM_FOR_TARGET"; then
- ac_cv_prog_ncn_cv_CONFIGURED_NM_FOR_TARGET="$ncn_cv_CONFIGURED_NM_FOR_TARGET" # Let the user override the test.
+ if test -n "$ncn_cv_NM_FOR_TARGET"; then
+ ac_cv_prog_ncn_cv_NM_FOR_TARGET="$ncn_cv_NM_FOR_TARGET" # Let the user override the test.
else
IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":"
ac_dummy="$PATH"
for ac_dir in $ac_dummy; do
test -z "$ac_dir" && ac_dir=.
if test -f $ac_dir/$ac_word; then
- ac_cv_prog_ncn_cv_CONFIGURED_NM_FOR_TARGET="nm"
+ ac_cv_prog_ncn_cv_NM_FOR_TARGET="nm"
break
fi
done
IFS="$ac_save_ifs"
- test -z "$ac_cv_prog_ncn_cv_CONFIGURED_NM_FOR_TARGET" && ac_cv_prog_ncn_cv_CONFIGURED_NM_FOR_TARGET="nm"
+ test -z "$ac_cv_prog_ncn_cv_NM_FOR_TARGET" && ac_cv_prog_ncn_cv_NM_FOR_TARGET="nm"
fi
fi
-ncn_cv_CONFIGURED_NM_FOR_TARGET="$ac_cv_prog_ncn_cv_CONFIGURED_NM_FOR_TARGET"
-if test -n "$ncn_cv_CONFIGURED_NM_FOR_TARGET"; then
- echo "$ac_t""$ncn_cv_CONFIGURED_NM_FOR_TARGET" 1>&6
+ncn_cv_NM_FOR_TARGET="$ac_cv_prog_ncn_cv_NM_FOR_TARGET"
+if test -n "$ncn_cv_NM_FOR_TARGET"; then
+ echo "$ac_t""$ncn_cv_NM_FOR_TARGET" 1>&6
else
echo "$ac_t""no" 1>&6
fi
- CONFIGURED_NM_FOR_TARGET=$ncn_cv_CONFIGURED_NM_FOR_TARGET
+ NM_FOR_TARGET=$ncn_cv_NM_FOR_TARGET
else
- CONFIGURED_NM_FOR_TARGET="${ncn_target_tool_prefix}nm"
+ NM_FOR_TARGET="${ncn_target_tool_prefix}nm"
fi
else
- CONFIGURED_NM_FOR_TARGET="$ac_cv_prog_CONFIGURED_NM_FOR_TARGET"
+ NM_FOR_TARGET="$ac_cv_prog_NM_FOR_TARGET"
fi
if test -n "$ncn_target_tool_prefix"; then
# Extract the first word of "${ncn_target_tool_prefix}ranlib", so it can be a program name with args.
set dummy ${ncn_target_tool_prefix}ranlib; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:4612: checking for $ac_word" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_CONFIGURED_RANLIB_FOR_TARGET'+set}'`\" = set"; then
+echo "configure:4885: checking for $ac_word" >&5
+if eval "test \"`echo '$''{'ac_cv_prog_RANLIB_FOR_TARGET'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
- if test -n "$CONFIGURED_RANLIB_FOR_TARGET"; then
- ac_cv_prog_CONFIGURED_RANLIB_FOR_TARGET="$CONFIGURED_RANLIB_FOR_TARGET" # Let the user override the test.
+ if test -n "$RANLIB_FOR_TARGET"; then
+ ac_cv_prog_RANLIB_FOR_TARGET="$RANLIB_FOR_TARGET" # Let the user override the test.
else
IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":"
ac_dummy="$PATH"
for ac_dir in $ac_dummy; do
test -z "$ac_dir" && ac_dir=.
if test -f $ac_dir/$ac_word; then
- ac_cv_prog_CONFIGURED_RANLIB_FOR_TARGET="${ncn_target_tool_prefix}ranlib"
+ ac_cv_prog_RANLIB_FOR_TARGET="${ncn_target_tool_prefix}ranlib"
break
fi
done
IFS="$ac_save_ifs"
fi
fi
-CONFIGURED_RANLIB_FOR_TARGET="$ac_cv_prog_CONFIGURED_RANLIB_FOR_TARGET"
-if test -n "$CONFIGURED_RANLIB_FOR_TARGET"; then
- echo "$ac_t""$CONFIGURED_RANLIB_FOR_TARGET" 1>&6
+RANLIB_FOR_TARGET="$ac_cv_prog_RANLIB_FOR_TARGET"
+if test -n "$RANLIB_FOR_TARGET"; then
+ echo "$ac_t""$RANLIB_FOR_TARGET" 1>&6
else
echo "$ac_t""no" 1>&6
fi
fi
-if test -z "$ac_cv_prog_CONFIGURED_RANLIB_FOR_TARGET" ; then
+if test -z "$ac_cv_prog_RANLIB_FOR_TARGET" ; then
if test $build = $target ; then
- ncn_cv_CONFIGURED_RANLIB_FOR_TARGET=$CONFIGURED_RANLIB_FOR_TARGET
+ ncn_cv_RANLIB_FOR_TARGET=$RANLIB_FOR_TARGET
# Extract the first word of "ranlib", so it can be a program name with args.
set dummy ranlib; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:4645: checking for $ac_word" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_ncn_cv_CONFIGURED_RANLIB_FOR_TARGET'+set}'`\" = set"; then
+echo "configure:4918: checking for $ac_word" >&5
+if eval "test \"`echo '$''{'ac_cv_prog_ncn_cv_RANLIB_FOR_TARGET'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
- if test -n "$ncn_cv_CONFIGURED_RANLIB_FOR_TARGET"; then
- ac_cv_prog_ncn_cv_CONFIGURED_RANLIB_FOR_TARGET="$ncn_cv_CONFIGURED_RANLIB_FOR_TARGET" # Let the user override the test.
+ if test -n "$ncn_cv_RANLIB_FOR_TARGET"; then
+ ac_cv_prog_ncn_cv_RANLIB_FOR_TARGET="$ncn_cv_RANLIB_FOR_TARGET" # Let the user override the test.
else
IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":"
ac_dummy="$PATH"
for ac_dir in $ac_dummy; do
test -z "$ac_dir" && ac_dir=.
if test -f $ac_dir/$ac_word; then
- ac_cv_prog_ncn_cv_CONFIGURED_RANLIB_FOR_TARGET="ranlib"
+ ac_cv_prog_ncn_cv_RANLIB_FOR_TARGET="ranlib"
break
fi
done
IFS="$ac_save_ifs"
- test -z "$ac_cv_prog_ncn_cv_CONFIGURED_RANLIB_FOR_TARGET" && ac_cv_prog_ncn_cv_CONFIGURED_RANLIB_FOR_TARGET=":"
+ test -z "$ac_cv_prog_ncn_cv_RANLIB_FOR_TARGET" && ac_cv_prog_ncn_cv_RANLIB_FOR_TARGET=":"
fi
fi
-ncn_cv_CONFIGURED_RANLIB_FOR_TARGET="$ac_cv_prog_ncn_cv_CONFIGURED_RANLIB_FOR_TARGET"
-if test -n "$ncn_cv_CONFIGURED_RANLIB_FOR_TARGET"; then
- echo "$ac_t""$ncn_cv_CONFIGURED_RANLIB_FOR_TARGET" 1>&6
+ncn_cv_RANLIB_FOR_TARGET="$ac_cv_prog_ncn_cv_RANLIB_FOR_TARGET"
+if test -n "$ncn_cv_RANLIB_FOR_TARGET"; then
+ echo "$ac_t""$ncn_cv_RANLIB_FOR_TARGET" 1>&6
else
echo "$ac_t""no" 1>&6
fi
- CONFIGURED_RANLIB_FOR_TARGET=$ncn_cv_CONFIGURED_RANLIB_FOR_TARGET
+ RANLIB_FOR_TARGET=$ncn_cv_RANLIB_FOR_TARGET
else
- CONFIGURED_RANLIB_FOR_TARGET=":"
+ RANLIB_FOR_TARGET=":"
fi
else
- CONFIGURED_RANLIB_FOR_TARGET="$ac_cv_prog_CONFIGURED_RANLIB_FOR_TARGET"
+ RANLIB_FOR_TARGET="$ac_cv_prog_RANLIB_FOR_TARGET"
fi
if test -n "$ncn_target_tool_prefix"; then
# Extract the first word of "${ncn_target_tool_prefix}windres", so it can be a program name with args.
set dummy ${ncn_target_tool_prefix}windres; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:4684: checking for $ac_word" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_CONFIGURED_WINDRES_FOR_TARGET'+set}'`\" = set"; then
+echo "configure:4957: checking for $ac_word" >&5
+if eval "test \"`echo '$''{'ac_cv_prog_WINDRES_FOR_TARGET'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
- if test -n "$CONFIGURED_WINDRES_FOR_TARGET"; then
- ac_cv_prog_CONFIGURED_WINDRES_FOR_TARGET="$CONFIGURED_WINDRES_FOR_TARGET" # Let the user override the test.
+ if test -n "$WINDRES_FOR_TARGET"; then
+ ac_cv_prog_WINDRES_FOR_TARGET="$WINDRES_FOR_TARGET" # Let the user override the test.
else
IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":"
ac_dummy="$PATH"
for ac_dir in $ac_dummy; do
test -z "$ac_dir" && ac_dir=.
if test -f $ac_dir/$ac_word; then
- ac_cv_prog_CONFIGURED_WINDRES_FOR_TARGET="${ncn_target_tool_prefix}windres"
+ ac_cv_prog_WINDRES_FOR_TARGET="${ncn_target_tool_prefix}windres"
break
fi
done
IFS="$ac_save_ifs"
fi
fi
-CONFIGURED_WINDRES_FOR_TARGET="$ac_cv_prog_CONFIGURED_WINDRES_FOR_TARGET"
-if test -n "$CONFIGURED_WINDRES_FOR_TARGET"; then
- echo "$ac_t""$CONFIGURED_WINDRES_FOR_TARGET" 1>&6
+WINDRES_FOR_TARGET="$ac_cv_prog_WINDRES_FOR_TARGET"
+if test -n "$WINDRES_FOR_TARGET"; then
+ echo "$ac_t""$WINDRES_FOR_TARGET" 1>&6
else
echo "$ac_t""no" 1>&6
fi
fi
-if test -z "$ac_cv_prog_CONFIGURED_WINDRES_FOR_TARGET" ; then
+if test -z "$ac_cv_prog_WINDRES_FOR_TARGET" ; then
if test $build = $target ; then
- ncn_cv_CONFIGURED_WINDRES_FOR_TARGET=$CONFIGURED_WINDRES_FOR_TARGET
+ ncn_cv_WINDRES_FOR_TARGET=$WINDRES_FOR_TARGET
# Extract the first word of "windres", so it can be a program name with args.
set dummy windres; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:4717: checking for $ac_word" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_ncn_cv_CONFIGURED_WINDRES_FOR_TARGET'+set}'`\" = set"; then
+echo "configure:4990: checking for $ac_word" >&5
+if eval "test \"`echo '$''{'ac_cv_prog_ncn_cv_WINDRES_FOR_TARGET'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
- if test -n "$ncn_cv_CONFIGURED_WINDRES_FOR_TARGET"; then
- ac_cv_prog_ncn_cv_CONFIGURED_WINDRES_FOR_TARGET="$ncn_cv_CONFIGURED_WINDRES_FOR_TARGET" # Let the user override the test.
+ if test -n "$ncn_cv_WINDRES_FOR_TARGET"; then
+ ac_cv_prog_ncn_cv_WINDRES_FOR_TARGET="$ncn_cv_WINDRES_FOR_TARGET" # Let the user override the test.
else
IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":"
ac_dummy="$PATH"
for ac_dir in $ac_dummy; do
test -z "$ac_dir" && ac_dir=.
if test -f $ac_dir/$ac_word; then
- ac_cv_prog_ncn_cv_CONFIGURED_WINDRES_FOR_TARGET="windres"
+ ac_cv_prog_ncn_cv_WINDRES_FOR_TARGET="windres"
break
fi
done
IFS="$ac_save_ifs"
- test -z "$ac_cv_prog_ncn_cv_CONFIGURED_WINDRES_FOR_TARGET" && ac_cv_prog_ncn_cv_CONFIGURED_WINDRES_FOR_TARGET="windres"
+ test -z "$ac_cv_prog_ncn_cv_WINDRES_FOR_TARGET" && ac_cv_prog_ncn_cv_WINDRES_FOR_TARGET="windres"
fi
fi
-ncn_cv_CONFIGURED_WINDRES_FOR_TARGET="$ac_cv_prog_ncn_cv_CONFIGURED_WINDRES_FOR_TARGET"
-if test -n "$ncn_cv_CONFIGURED_WINDRES_FOR_TARGET"; then
- echo "$ac_t""$ncn_cv_CONFIGURED_WINDRES_FOR_TARGET" 1>&6
+ncn_cv_WINDRES_FOR_TARGET="$ac_cv_prog_ncn_cv_WINDRES_FOR_TARGET"
+if test -n "$ncn_cv_WINDRES_FOR_TARGET"; then
+ echo "$ac_t""$ncn_cv_WINDRES_FOR_TARGET" 1>&6
else
echo "$ac_t""no" 1>&6
fi
- CONFIGURED_WINDRES_FOR_TARGET=$ncn_cv_CONFIGURED_WINDRES_FOR_TARGET
+ WINDRES_FOR_TARGET=$ncn_cv_WINDRES_FOR_TARGET
else
- CONFIGURED_WINDRES_FOR_TARGET="${ncn_target_tool_prefix}windres"
+ WINDRES_FOR_TARGET="${ncn_target_tool_prefix}windres"
fi
else
- CONFIGURED_WINDRES_FOR_TARGET="$ac_cv_prog_CONFIGURED_WINDRES_FOR_TARGET"
+ WINDRES_FOR_TARGET="$ac_cv_prog_WINDRES_FOR_TARGET"
fi
-
-
-
-
-
-
-
+CONFIGURED_AR_FOR_TARGET="$AR_FOR_TARGET"
+CONFIGURED_AS_FOR_TARGET="$AS_FOR_TARGET"
+CONFIGURED_CC_FOR_TARGET="$CC_FOR_TARGET"
+CONFIGURED_CXX_FOR_TARGET="$CXX_FOR_TARGET"
+CONFIGURED_DLLTOOL_FOR_TARGET="$DLLTOOL_FOR_TARGET"
+CONFIGURED_GCC_FOR_TARGET="$GCC_FOR_TARGET"
+CONFIGURED_GCJ_FOR_TARGET="$GCJ_FOR_TARGET"
+CONFIGURED_GFORTRAN_FOR_TARGET="$GFORTRAN_FOR_TARGET"
+CONFIGURED_LD_FOR_TARGET="$LD_FOR_TARGET"
+CONFIGURED_NM_FOR_TARGET="$NM_FOR_TARGET"
+CONFIGURED_RANLIB_FOR_TARGET="$RANLIB_FOR_TARGET"
+CONFIGURED_WINDRES_FOR_TARGET="$WINDRES_FOR_TARGET"
# should also eliminate all of this cleanly.
AR_FOR_TARGET="\$(USUAL_AR_FOR_TARGET)"
AS_FOR_TARGET="\$(USUAL_AS_FOR_TARGET)"
+ CC_FOR_TARGET="\$(USUAL_CC_FOR_TARGET)"
+ CXX_FOR_TARGET="\$(USUAL_CXX_FOR_TARGET)"
+ RAW_CXX_FOR_TARGET="\$(USUAL_RAW_CXX_FOR_TARGET)"
DLLTOOL_FOR_TARGET="\$(USUAL_DLLTOOL_FOR_TARGET)"
+ GCC_FOR_TARGET="\$(USUAL_GCC_FOR_TARGET)"
+ GCJ_FOR_TARGET="\$(USUAL_GCJ_FOR_TARGET)"
+ GFORTRAN_FOR_TARGET="\$(USUAL_GFORTRAN_FOR_TARGET)"
LD_FOR_TARGET="\$(USUAL_LD_FOR_TARGET)"
NM_FOR_TARGET="\$(USUAL_NM_FOR_TARGET)"
RANLIB_FOR_TARGET="\$(USUAL_RANLIB_FOR_TARGET)"
# Just use the ones we found.
AR_FOR_TARGET="\$(CONFIGURED_AR_FOR_TARGET)"
AS_FOR_TARGET="\$(CONFIGURED_AS_FOR_TARGET)"
+ CC_FOR_TARGET="\$(CONFIGURED_CC_FOR_TARGET)"
+ CXX_FOR_TARGET="\$(CONFIGURED_CXX_FOR_TARGET)"
+ RAW_CXX_FOR_TARGET="\$(CONFIGURED_CXX_FOR_TARGET)"
DLLTOOL_FOR_TARGET="\$(CONFIGURED_DLLTOOL_FOR_TARGET)"
+ GCC_FOR_TARGET="\$(CONFIGURED_GCC_FOR_TARGET)"
+ GCJ_FOR_TARGET="\$(CONFIGURED_GCJ_FOR_TARGET)"
+ GFORTRAN_FOR_TARGET="\$(CONFIGURED_GFORTRAN_FOR_TARGET)"
LD_FOR_TARGET="\$(CONFIGURED_LD_FOR_TARGET)"
NM_FOR_TARGET="\$(CONFIGURED_NM_FOR_TARGET)"
RANLIB_FOR_TARGET="\$(CONFIGURED_RANLIB_FOR_TARGET)"
-
-
-
-
-
# Certain tools may need extra flags.
AR_FOR_TARGET=${AR_FOR_TARGET}${extra_arflags_for_target}
RANLIB_FOR_TARGET=${RANLIB_FOR_TARGET}${extra_ranlibflags_for_target}
NM_FOR_TARGET=${NM_FOR_TARGET}${extra_nmflags_for_target}
echo $ac_n "checking whether to enable maintainer-specific portions of Makefiles""... $ac_c" 1>&6
-echo "configure:4802: checking whether to enable maintainer-specific portions of Makefiles" >&5
+echo "configure:5087: checking whether to enable maintainer-specific portions of Makefiles" >&5
# Check whether --enable-maintainer-mode or --disable-maintainer-mode was given.
if test "${enable_maintainer_mode+set}" = set; then
enableval="$enable_maintainer_mode"
# gcc for stageN-gcc and stagePREV-gcc for stage(N-1). In case this is not
# possible, however, we can resort to mv.
echo $ac_n "checking if symbolic links between directories work""... $ac_c" 1>&6
-echo "configure:4849: checking if symbolic links between directories work" >&5
+echo "configure:5134: checking if symbolic links between directories work" >&5
if eval "test \"`echo '$''{'gcc_cv_prog_ln_s_dir'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Transform confdefs.h into DEFS.
# Protect against shell expansion while executing Makefile rules.
# Protect against Makefile macro expansion.
-#
-# If the first sed substitution is executed (which looks for macros that
-# take arguments), then we branch to the quote section. Otherwise,
-# look for a macro that doesn't take arguments.
-cat >confdef2opt.sed <<\_ACEOF
-t clear
-: clear
-s,^[ ]*#[ ]*define[ ][ ]*\([^ (][^ (]*([^)]*)\)[ ]*\(.*\),-D\1=\2,g
-t quote
-s,^[ ]*#[ ]*define[ ][ ]*\([^ ][^ ]*\)[ ]*\(.*\),-D\1=\2,g
-t quote
-d
-: quote
-s,[ `~#$^&*(){}\\|;'"<>?],\\&,g
-s,\[,\\&,g
-s,\],\\&,g
-s,\$,$$,g
-p
-_ACEOF
-# We use echo to avoid assuming a particular line-breaking character.
-# The extra dot is to prevent the shell from consuming trailing
-# line-breaks from the sub-command output. A line-break within
-# single-quotes doesn't work because, if this script is created in a
-# platform that uses two characters for line-breaks (e.g., DOS), tr
-# would break.
-ac_LF_and_DOT=`echo; echo .`
-DEFS=`sed -n -f confdef2opt.sed confdefs.h | tr "$ac_LF_and_DOT" ' .'`
-rm -f confdef2opt.sed
+cat > conftest.defs <<\EOF
+s%#define \([A-Za-z_][A-Za-z0-9_]*\) *\(.*\)%-D\1=\2%g
+s%[ `~#$^&*(){}\\|;'"<>?]%\\&%g
+s%\[%\\&%g
+s%\]%\\&%g
+s%\$%$$%g
+EOF
+DEFS=`sed -f conftest.defs confdefs.h | tr '\012' ' '`
+rm -f conftest.defs
# Without the "./", some shells look in PATH for config.status.
s%@ncn_cv_OBJDUMP@%$ncn_cv_OBJDUMP%g
s%@CXX@%$CXX%g
s%@CFLAGS_FOR_BUILD@%$CFLAGS_FOR_BUILD%g
+s%@AR_FOR_TARGET@%$AR_FOR_TARGET%g
+s%@ncn_cv_AR_FOR_TARGET@%$ncn_cv_AR_FOR_TARGET%g
+s%@AS_FOR_TARGET@%$AS_FOR_TARGET%g
+s%@ncn_cv_AS_FOR_TARGET@%$ncn_cv_AS_FOR_TARGET%g
+s%@CC_FOR_TARGET@%$CC_FOR_TARGET%g
+s%@ncn_cv_CC_FOR_TARGET@%$ncn_cv_CC_FOR_TARGET%g
+s%@CXX_FOR_TARGET@%$CXX_FOR_TARGET%g
+s%@ncn_cv_CXX_FOR_TARGET@%$ncn_cv_CXX_FOR_TARGET%g
+s%@DLLTOOL_FOR_TARGET@%$DLLTOOL_FOR_TARGET%g
+s%@ncn_cv_DLLTOOL_FOR_TARGET@%$ncn_cv_DLLTOOL_FOR_TARGET%g
+s%@GCC_FOR_TARGET@%$GCC_FOR_TARGET%g
+s%@ncn_cv_GCC_FOR_TARGET@%$ncn_cv_GCC_FOR_TARGET%g
+s%@GCJ_FOR_TARGET@%$GCJ_FOR_TARGET%g
+s%@ncn_cv_GCJ_FOR_TARGET@%$ncn_cv_GCJ_FOR_TARGET%g
+s%@GFORTRAN_FOR_TARGET@%$GFORTRAN_FOR_TARGET%g
+s%@ncn_cv_GFORTRAN_FOR_TARGET@%$ncn_cv_GFORTRAN_FOR_TARGET%g
+s%@LD_FOR_TARGET@%$LD_FOR_TARGET%g
+s%@ncn_cv_LD_FOR_TARGET@%$ncn_cv_LD_FOR_TARGET%g
+s%@NM_FOR_TARGET@%$NM_FOR_TARGET%g
+s%@ncn_cv_NM_FOR_TARGET@%$ncn_cv_NM_FOR_TARGET%g
+s%@RANLIB_FOR_TARGET@%$RANLIB_FOR_TARGET%g
+s%@ncn_cv_RANLIB_FOR_TARGET@%$ncn_cv_RANLIB_FOR_TARGET%g
+s%@WINDRES_FOR_TARGET@%$WINDRES_FOR_TARGET%g
+s%@ncn_cv_WINDRES_FOR_TARGET@%$ncn_cv_WINDRES_FOR_TARGET%g
s%@CONFIGURED_AR_FOR_TARGET@%$CONFIGURED_AR_FOR_TARGET%g
-s%@ncn_cv_CONFIGURED_AR_FOR_TARGET@%$ncn_cv_CONFIGURED_AR_FOR_TARGET%g
s%@CONFIGURED_AS_FOR_TARGET@%$CONFIGURED_AS_FOR_TARGET%g
-s%@ncn_cv_CONFIGURED_AS_FOR_TARGET@%$ncn_cv_CONFIGURED_AS_FOR_TARGET%g
+s%@CONFIGURED_CC_FOR_TARGET@%$CONFIGURED_CC_FOR_TARGET%g
+s%@CONFIGURED_CXX_FOR_TARGET@%$CONFIGURED_CXX_FOR_TARGET%g
s%@CONFIGURED_DLLTOOL_FOR_TARGET@%$CONFIGURED_DLLTOOL_FOR_TARGET%g
-s%@ncn_cv_CONFIGURED_DLLTOOL_FOR_TARGET@%$ncn_cv_CONFIGURED_DLLTOOL_FOR_TARGET%g
+s%@CONFIGURED_GCC_FOR_TARGET@%$CONFIGURED_GCC_FOR_TARGET%g
+s%@CONFIGURED_GCJ_FOR_TARGET@%$CONFIGURED_GCJ_FOR_TARGET%g
+s%@CONFIGURED_GFORTRAN_FOR_TARGET@%$CONFIGURED_GFORTRAN_FOR_TARGET%g
s%@CONFIGURED_LD_FOR_TARGET@%$CONFIGURED_LD_FOR_TARGET%g
-s%@ncn_cv_CONFIGURED_LD_FOR_TARGET@%$ncn_cv_CONFIGURED_LD_FOR_TARGET%g
s%@CONFIGURED_NM_FOR_TARGET@%$CONFIGURED_NM_FOR_TARGET%g
-s%@ncn_cv_CONFIGURED_NM_FOR_TARGET@%$ncn_cv_CONFIGURED_NM_FOR_TARGET%g
s%@CONFIGURED_RANLIB_FOR_TARGET@%$CONFIGURED_RANLIB_FOR_TARGET%g
-s%@ncn_cv_CONFIGURED_RANLIB_FOR_TARGET@%$ncn_cv_CONFIGURED_RANLIB_FOR_TARGET%g
s%@CONFIGURED_WINDRES_FOR_TARGET@%$CONFIGURED_WINDRES_FOR_TARGET%g
-s%@ncn_cv_CONFIGURED_WINDRES_FOR_TARGET@%$ncn_cv_CONFIGURED_WINDRES_FOR_TARGET%g
-s%@GCC_FOR_TARGET@%$GCC_FOR_TARGET%g
s%@FLAGS_FOR_TARGET@%$FLAGS_FOR_TARGET%g
-s%@CC_FOR_TARGET@%$CC_FOR_TARGET%g
-s%@GCJ_FOR_TARGET@%$GCJ_FOR_TARGET%g
-s%@GFORTRAN_FOR_TARGET@%$GFORTRAN_FOR_TARGET%g
-s%@CXX_FOR_TARGET@%$CXX_FOR_TARGET%g
s%@RAW_CXX_FOR_TARGET@%$RAW_CXX_FOR_TARGET%g
-s%@CXX_FOR_TARGET_FOR_RECURSIVE_MAKE@%$CXX_FOR_TARGET_FOR_RECURSIVE_MAKE%g
-s%@RAW_CXX_FOR_TARGET_FOR_RECURSIVE_MAKE@%$RAW_CXX_FOR_TARGET_FOR_RECURSIVE_MAKE%g
-s%@AR_FOR_TARGET@%$AR_FOR_TARGET%g
-s%@AS_FOR_TARGET@%$AS_FOR_TARGET%g
-s%@DLLTOOL_FOR_TARGET@%$DLLTOOL_FOR_TARGET%g
-s%@LD_FOR_TARGET@%$LD_FOR_TARGET%g
-s%@NM_FOR_TARGET@%$NM_FOR_TARGET%g
-s%@RANLIB_FOR_TARGET@%$RANLIB_FOR_TARGET%g
-s%@WINDRES_FOR_TARGET@%$WINDRES_FOR_TARGET%g
s%@MAINTAINER_MODE_TRUE@%$MAINTAINER_MODE_TRUE%g
s%@MAINTAINER_MODE_FALSE@%$MAINTAINER_MODE_FALSE%g
s%@MAINT@%$MAINT%g
projects / binutils-gdb.git / commitdiff