mi_run_to_main. Skip thread exit test on remote targets.
* gdb.mi/mi-nsintrall.exp: Don't check isnative. Use
mi_run_to_main.
* gdb.mi/mi-nsmoribund.exp: Don't check isnative. Use
mi_run_to_main.
* lib/mi-support.exp (mi_gdb_target_cmd): Remove trailing anchor
when expecting ^connected. Detect when the target doesn't support
non-stop mode.
(mi_run_cmd): Detect if non-stop mode was requested by isn't
supported. Return -1 on error, 0 on success.
(mi_runto_helper): Don't expect a stop if mi_run_cmd failed.
(mi_runto): Return mi_runto_helper's result explicitly.
+2009-04-02 Pedro Alves <pedro@codesourcery.com>
+
+ * gdb.mi/mi-nonstop.exp: Don't check isnative. Use
+ mi_run_to_main. Skip thread exit test on remote targets.
+ * gdb.mi/mi-nsintrall.exp: Don't check isnative. Use
+ mi_run_to_main.
+ * gdb.mi/mi-nsmoribund.exp: Don't check isnative. Use
+ mi_run_to_main.
+ * lib/mi-support.exp (mi_gdb_target_cmd): Remove trailing anchor
+ when expecting ^connected. Detect when the target doesn't support
+ non-stop mode.
+ (mi_run_cmd): Detect if non-stop mode was requested by isn't
+ supported. Return -1 on error, 0 on success.
+ (mi_runto_helper): Don't expect a stop if mi_run_cmd failed.
+ (mi_runto): Return mi_runto_helper's result explicitly.
+
2009-04-01 Pedro Alves <pedro@codesourcery.com>
* gdb.threads/pending-step.c, gdb.threads/pending-step.exp: New.
# You should have received a copy of the GNU General Public License
# along with this program. If not, see <http://www.gnu.org/licenses/>.
-# This only works with native configurations
-if {![isnative]} {
- return
-}
-
load_lib mi-support.exp
set MIFLAGS "-i=mi"
send_gdb "-gdb-show non-stop\n"
gdb_expect {
-re ".*\\^done,value=\"off\",supported=\"(\[^\"\]+)\"\r\n$mi_gdb_prompt$" {
- if { $expect_out(1,string) == "1" } {
- set supported 1
- }
+ if { $expect_out(1,string) == "1" } {
+ set supported 1
+ }
}
-re ".$mi_gdb_prompt$" {
}
mi_gdb_test "-gdb-set target-async 1" ".*"
detect_async
-mi_gdb_test "200-break-insert -t main" ".*"
-
-set created "=thread-created,id=\"$decimal\"\r\n"
-set running "\\*running,thread-id=\"$decimal\"\r\n"
-
-set notifs "($created)*($running)*($library_loaded_re)*"
-
-# Note: presently, we skip this test on non-native targets,
-# so 'run' is OK. As soon as we start to run this on remote
-# target, the logic from mi_run_cmd will have to be refactored.
-send_gdb "-exec-run\n"
-gdb_expect {
- -re "\\^running\r\n$notifs$mi_gdb_prompt" {
- }
- -re "\\^error,msg=\"The target does not support running in non-stop mode.\"" {
- verbose -log "Non-stop mode not supported, skipping all tests"
- return
- }
- -re "\r\n$mi_gdb_prompt" {
- perror "Cannot start target (unknown output after running)"
- return -1
- }
- timeout {
- perror "Cannot start target (timeout)"
- return -1
- }
+if { [mi_run_to_main] < 0 } {
+ perror "mi-nonstop.exp tests suppressed"
+ continue
}
-mi_expect_stop "breakpoint-hit" main ".*" ".*" "\[0-9\]+" { "" "disp=\"del\"" } "run to main"
mi_create_breakpoint break_at_me 2 keep break_at_me .* .* .* "breakpoint at marker"
mi_check_varobj_value I_W0 1 "check varobj, w0, 1"
mi_check_varobj_value I_W1 1 "check varobj, w1, 1"
-send_gdb "-exec-interrupt --thread 1\n"
+send_gdb "-exec-interrupt --thread 1\n"
gdb_expect {
-re "\\^done\r\n$mi_gdb_prompt\\*stopped\[^\r\n\]+\r\n$" {
- pass "interrupted"
+ pass "interrupted"
}
timeout {
- fail "interrupted (timeout)"
+ fail "interrupted (timeout)"
}
}
# The interrupt command sends SIGINT to the target, and therefore the
send_gdb "-exec-continue --all\n"
gdb_expect {
-re ".*\\*running,thread-id=\"3\"\r\n\\*running,thread-id=\"2\"\r\n\\*running,thread-id=\"1\"\r\n$mi_gdb_prompt" {
- pass "resume all"
+ pass "resume all"
}
timeout {
- fail "resume all (timeout)"
+ fail "resume all (timeout)"
}
}
mi_gdb_test "-thread-select 2" "\\^done.*" "select first worker thread"
# Since thread 2 is running, we need to set variable via another thread.
mi_gdb_test "-gdb-set --thread 3 variable exit_first_thread=1" ".*\\^done" "ask the second thread to exit"
-gdb_expect {
- -re ".*=thread-exited,id=\"2\",group-id=\"\[0-9\]+\"\r\n$" {
- pass "wait for thread exit"
- }
- timeout {
- fail "wait for thread exit (timeout)"
+
+set test "wait for thread exit"
+if { [is_remote target] } {
+ # The remote protocol doesn't have support for thread exit
+ # notifications.
+ unsupported $test
+} else {
+ gdb_expect {
+ -re ".*=thread-exited,id=\"2\",group-id=\"\[0-9\]+\"\r\n$" {
+ pass $test
+ }
+ timeout {
+ fail "$test (timeout)"
+ }
}
}
"\\^done,stack=\\\[frame={level=\"0\",addr=\".*\",func=\"break_at_me\".*" \
"stacktrace of stopped thread"
-
mi_gdb_exit
-
# You should have received a copy of the GNU General Public License
# along with this program. If not, see <http://www.gnu.org/licenses/>.
-# This only works with native configurations
-if {![isnative]} {
- return
-}
-
load_lib mi-support.exp
set MIFLAGS "-i=mi"
mi_gdb_test "-gdb-set target-async 1" ".*"
detect_async
-mi_gdb_test "200-break-insert -t main" ".*"
-
-set created "=thread-created,id=\"$decimal\"\r\n"
-set running "\\*running,thread-id=\"$decimal\"\r\n"
-
-set notifs "($created)*($running)*($library_loaded_re)*"
-
-# Note: presently, we skip this test on non-native targets,
-# so 'run' is OK. As soon as we start to run this on remote
-# target, the logic from mi_run_cmd will have to be refactored.
-send_gdb "-exec-run\n"
-gdb_expect {
- -re "\\^running\r\n$notifs$mi_gdb_prompt" {
- }
- -re "\\^error,msg=\"The target does not support running in non-stop mode.\"" {
- verbose -log "Non-stop mode not supported, skipping all tests"
- return
- }
- -re "\r\n$mi_gdb_prompt" {
- perror "Cannot start target (unknown output after running)"
- return -1
- }
- timeout {
- perror "Cannot start target (timeout)"
- return -1
- }
+if { [mi_run_to_main] < 0 } {
+ perror "mi-nsintrall.exp tests suppressed"
+ continue
}
-mi_expect_stop "breakpoint-hit" main ".*" ".*" "\[0-9\]+" \
- { "" "disp=\"del\"" } "run to main"
mi_create_breakpoint thread_function 2 keep thread_function .* .* .* \
"breakpoint at thread_function"
# You should have received a copy of the GNU General Public License
# along with this program. If not, see <http://www.gnu.org/licenses/>.
-# This only works with native configurations
-if {![isnative]} {
- return
-}
-
load_lib mi-support.exp
set MIFLAGS "-i=mi"
mi_gdb_test "-gdb-set target-async 1" ".*"
detect_async
-mi_gdb_test "200-break-insert -t main" ".*"
-
-set created "=thread-created,id=\"$decimal\"\r\n"
-set running "\\*running,thread-id=\"$decimal\"\r\n"
-
-set notifs "($created)*($running)*($library_loaded_re)*"
-
-# Note: presently, we skip this test on non-native targets,
-# so 'run' is OK. As soon as we start to run this on remote
-# target, the logic from mi_run_cmd will have to be refactored.
-send_gdb "-exec-run\n"
-gdb_expect {
- -re "\\^running\r\n$notifs$mi_gdb_prompt" {
- }
- -re "\\^error,msg=\"The target does not support running in non-stop mode.\"" {
- verbose -log "Non-stop mode not supported, skipping all tests"
- return
- }
- -re "\r\n$mi_gdb_prompt" {
- perror "Cannot start target (unknown output after running)"
- return -1
- }
- timeout {
- perror "Cannot start target (timeout)"
- return -1
- }
+if { [mi_run_to_main] < 0 } {
+ perror "mi-nsmoribund.exp tests suppressed"
+ continue
}
-mi_expect_stop "breakpoint-hit" main ".*" ".*" "\[0-9\]+" \
- { "" "disp=\"del\"" } "run to main"
# Keep this in sync with THREADS in the the $srcfile.
set nthreads 10
for {set i 1} {$i <= 3} {incr i} {
send_gdb "47-target-select $targetname $serialport\n"
gdb_expect 60 {
- -re "47\\^connected.*$mi_gdb_prompt$" {
+ -re "47\\^connected.*$mi_gdb_prompt" {
verbose "Set target to $targetname";
return 0;
}
sleep 5
continue
}
+ -re "Non-stop mode requested, but remote does not support non-stop.*$mi_gdb_prompt" {
+ unsupported "Non-stop mode not supported"
+ return 1
+ }
-re "Timeout reading from remote system.*$mi_gdb_prompt$" {
verbose "Got timeout error from gdb.";
}
-re "$mi_gdb_prompt$" { }
default {
perror "gdb_init_command for target failed";
- return;
+ return -1;
}
}
}
if { [mi_gdb_target_load] < 0 } {
- return
+ return -1
}
if [target_info exists use_gdb_stub] {
-re "220\\^running\[\r\n\]+\\*running,thread-id=\"\[^\"\]+\"\r\n$mi_gdb_prompt" {}
default {}
}
- return;
+ return 0;
}
if [target_info exists gdb,start_symbol] {
# to better handle RUN.
send_gdb "jump *$start\n"
warning "Using CLI jump command, expect run-to-main FAIL"
- return
+ return 0
}
send_gdb "220-exec-run $args\n"
gdb_expect {
-re "220\\^running\r\n(\\*running,thread-id=\"\[^\"\]+\"\r\n|=thread-created,id=\"1\",group-id=\"\[0-9\]+\"\r\n)*(${library_loaded_re})*(${thread_selected_re})?${mi_gdb_prompt}" {
}
+ -re "\\^error,msg=\"The target does not support running in non-stop mode.\"" {
+ unsupported "Non-stop mode not supported"
+ return -1
+ }
timeout {
perror "Unable to start target"
- return
+ return -1
}
}
# NOTE: Shortly after this there will be a ``000*stopped,...(gdb)''
+
+ return 0
}
#
}
if {$run_or_continue == "run"} {
- mi_run_cmd
+ if { [mi_run_cmd] < 0 } {
+ return -1
+ }
} else {
mi_send_resuming_command "exec-continue" "$test"
}
}
proc mi_runto {func} {
- mi_runto_helper $func "run"
+ return [mi_runto_helper $func "run"]
}
# Next to the next statement
projects / binutils-gdb.git / commitdiff