#define BELIEVE_PCC_PROMOTION 0
#endif
+#if 0
+/* I think this can go away, all current uses have been removed.
+ GCC emits a few crazy types which can only be distinguished by the
+ name (complex, long long on some machines), but I'd say fix GCC. */
+
/* During some calls to read_type (and thus to read_range_type), this
contains the name of the type being defined. Range types are only
used in C as basic types. We use the name to distinguish the otherwise
FIXME, this should disappear with better type management. */
static char *long_kludge_name;
+#endif
#if 0
struct complaint dbx_class_complaint =
} while (0)
\f
+/* This is used by other symbol readers besides stabs, so for cleanliness
+ should probably be in buildsym.c. */
+
int
hashname (name)
char *name;
else
deftype = *p++;
- /* c is a special case, not followed by a type-number.
- SYMBOL:c=iVALUE for an integer constant symbol.
- SYMBOL:c=rVALUE for a floating constant symbol.
- SYMBOL:c=eTYPE,INTVALUE for an enum constant symbol.
- e.g. "b:c=e6,0" for "const b = blob1"
- (where type 6 is defined by "blobs:t6=eblob1:0,blob2:1,;"). */
- if (deftype == 'c')
+ switch (deftype)
{
+ case 'c':
+ /* c is a special case, not followed by a type-number.
+ SYMBOL:c=iVALUE for an integer constant symbol.
+ SYMBOL:c=rVALUE for a floating constant symbol.
+ SYMBOL:c=eTYPE,INTVALUE for an enum constant symbol.
+ e.g. "b:c=e6,0" for "const b = blob1"
+ (where type 6 is defined by "blobs:t6=eblob1:0,blob2:1,;"). */
if (*p != '=')
{
SYMBOL_CLASS (sym) = LOC_CONST;
SYMBOL_NAMESPACE (sym) = VAR_NAMESPACE;
add_symbol_to_list (sym, &file_symbols);
return sym;
- }
-
- /* Now usually comes a number that says which data type,
- and possibly more stuff to define the type
- (all of which is handled by read_type) */
-
- if (deftype == 'p' && *p == 'F')
- /* pF is a two-letter code that means a function parameter in Fortran.
- The type-number specifies the type of the return value.
- Translate it into a pointer-to-function type. */
- {
- p++;
- SYMBOL_TYPE (sym)
- = lookup_pointer_type (lookup_function_type (read_type (&p, objfile)));
- }
- else
- {
- /* The symbol class letter is followed by a type (typically the
- type of the symbol, or its return-type, or etc). Read it. */
-
- synonym = *p == 't';
-
- if (synonym)
- {
- p++;
- type_synonym_name = obsavestring (SYMBOL_NAME (sym),
- strlen (SYMBOL_NAME (sym)),
- &objfile -> symbol_obstack);
- }
- /* Here we save the name of the symbol for read_range_type, which
- ends up reading in the basic types. In stabs, unfortunately there
- is no distinction between "int" and "long" types except their
- names. Until we work out a saner type policy (eliminating most
- builtin types and using the names specified in the files), we
- save away the name so that far away from here in read_range_type,
- we can examine it to decide between "int" and "long". FIXME. */
- long_kludge_name = SYMBOL_NAME (sym);
-
- SYMBOL_TYPE (sym) = read_type (&p, objfile);
- }
-
- switch (deftype)
- {
case 'C':
/* The name of a caught exception. */
+ SYMBOL_TYPE (sym) = read_type (&p, objfile);
SYMBOL_CLASS (sym) = LOC_LABEL;
SYMBOL_NAMESPACE (sym) = VAR_NAMESPACE;
SYMBOL_VALUE_ADDRESS (sym) = valu;
case 'f':
/* A static function definition. */
+ SYMBOL_TYPE (sym) = read_type (&p, objfile);
SYMBOL_CLASS (sym) = LOC_BLOCK;
SYMBOL_NAMESPACE (sym) = VAR_NAMESPACE;
add_symbol_to_list (sym, &file_symbols);
case 'F':
/* A global function definition. */
+ SYMBOL_TYPE (sym) = read_type (&p, objfile);
SYMBOL_CLASS (sym) = LOC_BLOCK;
SYMBOL_NAMESPACE (sym) = VAR_NAMESPACE;
add_symbol_to_list (sym, &global_symbols);
value is not correct. It is necessary to search for the
corresponding linker definition to find the value.
These definitions appear at the end of the namelist. */
+ SYMBOL_TYPE (sym) = read_type (&p, objfile);
i = hashname (SYMBOL_NAME (sym));
SYMBOL_VALUE_CHAIN (sym) = global_sym_chain[i];
global_sym_chain[i] = sym;
when there is no code letter in the dbx data.
Dbx data never actually contains 'l'. */
case 'l':
+ SYMBOL_TYPE (sym) = read_type (&p, objfile);
SYMBOL_CLASS (sym) = LOC_LOCAL;
SYMBOL_VALUE (sym) = valu;
SYMBOL_NAMESPACE (sym) = VAR_NAMESPACE;
break;
case 'p':
+ if (*p == 'F')
+ /* pF is a two-letter code that means a function parameter in Fortran.
+ The type-number specifies the type of the return value.
+ Translate it into a pointer-to-function type. */
+ {
+ p++;
+ SYMBOL_TYPE (sym)
+ = lookup_pointer_type
+ (lookup_function_type (read_type (&p, objfile)));
+ }
+ else
+ SYMBOL_TYPE (sym) = read_type (&p, objfile);
+
/* Normally this is a parameter, a LOC_ARG. On the i960, it
can also be a LOC_LOCAL_ARG depending on symbol type. */
#ifndef DBX_PARM_SYMBOL_CLASS
#define DBX_PARM_SYMBOL_CLASS(type) LOC_ARG
#endif
+
SYMBOL_CLASS (sym) = DBX_PARM_SYMBOL_CLASS (type);
SYMBOL_VALUE (sym) = valu;
SYMBOL_NAMESPACE (sym) = VAR_NAMESPACE;
are referenced by this file. gdb is not prepared to deal
with this extra information. FIXME, it ought to. */
if (type == N_FUN)
- goto process_prototype_types;
+ {
+ read_type (&p, objfile);
+ goto process_prototype_types;
+ }
/*FALLTHROUGH*/
case 'R':
/* Parameter which is in a register. */
+ SYMBOL_TYPE (sym) = read_type (&p, objfile);
SYMBOL_CLASS (sym) = LOC_REGPARM;
SYMBOL_VALUE (sym) = STAB_REG_TO_REGNUM (valu);
if (SYMBOL_VALUE (sym) >= NUM_REGS)
case 'r':
/* Register variable (either global or local). */
+ SYMBOL_TYPE (sym) = read_type (&p, objfile);
SYMBOL_CLASS (sym) = LOC_REGISTER;
SYMBOL_VALUE (sym) = STAB_REG_TO_REGNUM (valu);
if (SYMBOL_VALUE (sym) >= NUM_REGS)
case 'S':
/* Static symbol at top level of file */
+ SYMBOL_TYPE (sym) = read_type (&p, objfile);
SYMBOL_CLASS (sym) = LOC_STATIC;
SYMBOL_VALUE_ADDRESS (sym) = valu;
SYMBOL_NAMESPACE (sym) = VAR_NAMESPACE;
break;
case 't':
+#if 0
+ /* See comment where long_kludge_name is declared. */
+ /* Here we save the name of the symbol for read_range_type, which
+ ends up reading in the basic types. In stabs, unfortunately there
+ is no distinction between "int" and "long" types except their
+ names. Until we work out a saner type policy (eliminating most
+ builtin types and using the names specified in the files), we
+ save away the name so that far away from here in read_range_type,
+ we can examine it to decide between "int" and "long". FIXME. */
+ long_kludge_name = SYMBOL_NAME (sym);
+#endif
+ SYMBOL_TYPE (sym) = read_type (&p, objfile);
+
/* For a nameless type, we don't want a create a symbol, thus we
did not use `sym'. Return without further processing. */
if (nameless) return NULL;
SYMBOL_VALUE (sym) = valu;
SYMBOL_NAMESPACE (sym) = VAR_NAMESPACE;
/* C++ vagaries: we may have a type which is derived from
- a base type which did not have its name defined when the
- derived class was output. We fill in the derived class's
- base part member's name here in that case. */
+ a base type which did not have its name defined when the
+ derived class was output. We fill in the derived class's
+ base part member's name here in that case. */
if (TYPE_NAME (SYMBOL_TYPE (sym)) != NULL)
- if ((TYPE_CODE (SYMBOL_TYPE (sym)) == TYPE_CODE_STRUCT
- || TYPE_CODE (SYMBOL_TYPE (sym)) == TYPE_CODE_UNION)
- && TYPE_N_BASECLASSES (SYMBOL_TYPE (sym)))
- {
- int j;
- for (j = TYPE_N_BASECLASSES (SYMBOL_TYPE (sym)) - 1; j >= 0; j--)
- if (TYPE_BASECLASS_NAME (SYMBOL_TYPE (sym), j) == 0)
- TYPE_BASECLASS_NAME (SYMBOL_TYPE (sym), j) =
- type_name_no_tag (TYPE_BASECLASS (SYMBOL_TYPE (sym), j));
- }
+ if ((TYPE_CODE (SYMBOL_TYPE (sym)) == TYPE_CODE_STRUCT
+ || TYPE_CODE (SYMBOL_TYPE (sym)) == TYPE_CODE_UNION)
+ && TYPE_N_BASECLASSES (SYMBOL_TYPE (sym)))
+ {
+ int j;
+ for (j = TYPE_N_BASECLASSES (SYMBOL_TYPE (sym)) - 1; j >= 0; j--)
+ if (TYPE_BASECLASS_NAME (SYMBOL_TYPE (sym), j) == 0)
+ TYPE_BASECLASS_NAME (SYMBOL_TYPE (sym), j) =
+ type_name_no_tag (TYPE_BASECLASS (SYMBOL_TYPE (sym), j));
+ }
if (TYPE_NAME (SYMBOL_TYPE (sym)) == NULL)
- TYPE_NAME (SYMBOL_TYPE (sym)) = SYMBOL_NAME (sym);
+ {
+ if (TYPE_CODE (SYMBOL_TYPE (sym)) == TYPE_CODE_PTR)
+ {
+ /* If we are giving a name to a type such as "pointer
+ to foo", we better not set the TYPE_NAME. If the
+ program contains "typedef char *caddr_t;", we don't
+ want all variables of type char * to print as
+ caddr_t. This is not just a consequence of GDB's
+ type management; PCC and GCC (at least through
+ version 2.4) both output variables of either type
+ char * or caddr_t with the type number defined in
+ the 't' symbol for caddr_t. If a future compiler
+ cleans this up it GDB is not ready for it yet, but
+ if it becomes ready we somehow need to disable this
+ check (without breaking the PCC/GCC2.4 case).
+
+ Sigh.
+
+ Fortunately, this check seems not to be necessary
+ for anything except pointers. */
+ }
+ else
+ TYPE_NAME (SYMBOL_TYPE (sym)) = SYMBOL_NAME (sym);
+ }
add_symbol_to_list (sym, &file_symbols);
break;
case 'T':
+ /* Struct, union, or enum tag. For GNU C++, this can be be followed
+ by 't' which means we are typedef'ing it as well. */
+ synonym = *p == 't';
+
+ if (synonym)
+ {
+ p++;
+ type_synonym_name = obsavestring (SYMBOL_NAME (sym),
+ strlen (SYMBOL_NAME (sym)),
+ &objfile -> symbol_obstack);
+ }
+
+ SYMBOL_TYPE (sym) = read_type (&p, objfile);
+
/* For a nameless type, we don't want a create a symbol, thus we
did not use `sym'. Return without further processing. */
if (nameless) return NULL;
case 'V':
/* Static symbol of local scope */
+ SYMBOL_TYPE (sym) = read_type (&p, objfile);
SYMBOL_CLASS (sym) = LOC_STATIC;
SYMBOL_VALUE_ADDRESS (sym) = valu;
SYMBOL_NAMESPACE (sym) = VAR_NAMESPACE;
case 'v':
/* Reference parameter */
+ SYMBOL_TYPE (sym) = read_type (&p, objfile);
SYMBOL_CLASS (sym) = LOC_REF_ARG;
SYMBOL_VALUE (sym) = valu;
SYMBOL_NAMESPACE (sym) = VAR_NAMESPACE;
Sun claims ("dbx and dbxtool interfaces", 2nd ed)
that Pascal uses it too, but when I tried it Pascal used
"x:3" (local symbol) instead. */
+ SYMBOL_TYPE (sym) = read_type (&p, objfile);
SYMBOL_CLASS (sym) = LOC_LOCAL;
SYMBOL_VALUE (sym) = valu;
SYMBOL_NAMESPACE (sym) = VAR_NAMESPACE;
break;
default:
+ SYMBOL_TYPE (sym) = error_type (&p);
SYMBOL_CLASS (sym) = LOC_CONST;
SYMBOL_VALUE (sym) = 0;
- SYMBOL_TYPE (sym) = error_type (&p);
SYMBOL_NAMESPACE (sym) = VAR_NAMESPACE;
add_symbol_to_list (sym, &file_symbols);
break;
}
\f
-/* Read a dbx type reference or definition;
- return the type that is meant.
- This can be just a number, in which case it references
- a type already defined and placed in type_vector.
- Or the number can be followed by an =, in which case
- it means to define a new type according to the text that
- follows the =. */
+/* Read type information or a type definition; return the type. Even
+ though this routine accepts either type information or a type
+ definition, the distinction is relevant--some parts of stabsread.c
+ assume that type information starts with a digit, '-', or '(' in
+ deciding whether to call read_type. */
struct type *
read_type (pp, objfile)
projects / binutils-gdb.git / commitdiff