choice
prompt "Kernel Headers"
- default BR2_KERNEL_HEADERS_2_6_34
+ default BR2_KERNEL_HEADERS_2_6_35
help
Select the version of kernel header files you wish to use.
For the snapshot, you have to provide the
linux-2.6.tar.bz2 tarball in your download dir.
- config BR2_KERNEL_HEADERS_2_6_27
- depends on BR2_DEPRECATED
- bool "Linux 2.6.27.x kernel headers"
-
- config BR2_KERNEL_HEADERS_2_6_28
- bool "Linux 2.6.28.x kernel headers"
- depends on BR2_DEPRECATED
-
config BR2_KERNEL_HEADERS_2_6_29
bool "Linux 2.6.29.x kernel headers"
depends on BR2_DEPRECATED
config BR2_KERNEL_HEADERS_2_6_32
bool "Linux 2.6.32.x kernel headers"
+ depends on BR2_DEPRECATED
config BR2_KERNEL_HEADERS_2_6_33
bool "Linux 2.6.33.x kernel headers"
config BR2_KERNEL_HEADERS_2_6_34
bool "Linux 2.6.34.x kernel headers"
+ config BR2_KERNEL_HEADERS_2_6_35
+ bool "Linux 2.6.35.x kernel headers"
+
config BR2_KERNEL_HEADERS_VERSION
bool "Linux 2.6 (manually specified version)"
depends on BR2_KERNEL_HEADERS_VERSION
help
Specify the version you want to use.
- E.g.: 2.6.31.2
+ E.G.: 2.6.31.2
config BR2_DEFAULT_KERNEL_HEADERS
string
- default "2.6.27.50" if BR2_KERNEL_HEADERS_2_6_27
- default "2.6.28.10" if BR2_KERNEL_HEADERS_2_6_28
default "2.6.29.6" if BR2_KERNEL_HEADERS_2_6_29
default "2.6.30.10" if BR2_KERNEL_HEADERS_2_6_30
default "2.6.31.14" if BR2_KERNEL_HEADERS_2_6_31
- default "2.6.32.18" if BR2_KERNEL_HEADERS_2_6_32
+ default "2.6.32.21" if BR2_KERNEL_HEADERS_2_6_32
default "2.6.33.7" if BR2_KERNEL_HEADERS_2_6_33
- default "2.6.34.3" if BR2_KERNEL_HEADERS_2_6_34
+ default "2.6.34.6" if BR2_KERNEL_HEADERS_2_6_34
+ default "2.6.35.4" if BR2_KERNEL_HEADERS_2_6_35
default "2.6" if BR2_KERNEL_HEADERS_SNAP
default $BR2_DEFAULT_KERNEL_VERSION if BR2_KERNEL_HEADERS_VERSION
+++ /dev/null
---- a/drivers/net/cris/eth_v10.c.org 2009-01-28 09:19:09.000000000 +0100
-+++ b/drivers/net/cris/eth_v10.c 2009-01-28 09:19:16.000000000 +0100
-@@ -1707,7 +1707,7 @@
- static void
- e100_netpoll(struct net_device* netdev)
- {
-- e100rxtx_interrupt(NETWORK_DMA_TX_IRQ_NBR, netdev, NULL);
-+ e100rxtx_interrupt(NETWORK_DMA_TX_IRQ_NBR, netdev);
- }
- #endif
-
+++ /dev/null
-diff -urN linux-2.6.28/arch/cris/include/arch-v10/arch/Kbuild linux-2.6.28.my/arch/cris/include/arch-v10/arch/Kbuild
---- linux-2.6.28/arch/cris/include/arch-v10/arch/Kbuild 2008-12-25 00:26:37.000000000 +0100
-+++ linux-2.6.28.my/arch/cris/include/arch-v10/arch/Kbuild 2009-01-12 12:59:06.000000000 +0100
-@@ -1,3 +1,5 @@
-+header-y += elf.h
-+header-y += ptrace.h
- header-y += user.h
- header-y += svinto.h
- header-y += sv_addr_ag.h
-diff -urN linux-2.6.28/arch/cris/include/asm/Kbuild linux-2.6.28.my/arch/cris/include/asm/Kbuild
---- linux-2.6.28/arch/cris/include/asm/Kbuild 2008-12-25 00:26:37.000000000 +0100
-+++ linux-2.6.28.my/arch/cris/include/asm/Kbuild 2009-01-12 13:14:40.000000000 +0100
-@@ -1,11 +1,13 @@
- include include/asm-generic/Kbuild.asm
-
--header-y += arch-v10/
--header-y += arch-v32/
-+header-y += ../arch-v10/arch/
-+header-y += ../arch-v32/arch/
-
-+header-y += elf.h
- header-y += ethernet.h
- header-y += rtc.h
- header-y += sync_serial.h
-+header-y += user.h
-
- unifdef-y += etraxgpio.h
- unifdef-y += rs485.h
+++ /dev/null
---- linux-2.6.28/arch/cris/Makefile 2008-12-25 00:26:37.000000000 +0100
-+++ linux-2.6.28.my/arch/cris/Makefile 2009-01-12 13:21:44.000000000 +0100
-@@ -40,7 +40,7 @@
-
- LD = $(CROSS_COMPILE)ld -mcrislinux
-
--OBJCOPYFLAGS := -O binary -R .note -R .comment -S
-+OBJCOPYFLAGS := -O binary -R .note -R .note.gnu.build-id -R .comment
-
- CPPFLAGS_vmlinux.lds = -DDRAM_VIRTUAL_BASE=0x$(CONFIG_ETRAX_DRAM_VIRTUAL_BASE)
-
-diff -urN linux-2.6.28/arch/cris/arch-v10/boot/Makefile linux-2.6.28.my/arch/cris/arch-v10/boot/Makefile
---- linux-2.6.28/arch/cris/arch-v10/boot/Makefile 2008-12-25 00:26:37.000000000 +0100
-+++ linux-2.6.28.my/arch/cris/arch-v10/boot/Makefile 2009-01-12 13:28:25.000000000 +0100
-@@ -2,8 +2,6 @@
- # arch/cris/arch-v10/boot/Makefile
- #
-
--OBJCOPYFLAGS = -O binary --remove-section=.bss
--
- subdir- := compressed rescue
- targets := Image
-
-diff -urN linux-2.6.28/arch/cris/arch-v10/boot/compressed/Makefile linux-2.6.28.my/arch/cris/arch-v10/boot/compressed/Makefile
---- linux-2.6.28/arch/cris/arch-v10/boot/compressed/Makefile 2008-12-25 00:26:37.000000000 +0100
-+++ linux-2.6.28.my/arch/cris/arch-v10/boot/compressed/Makefile 2009-01-12 13:28:33.000000000 +0100
-@@ -6,7 +6,6 @@
- ccflags-y += -O2 $(LINUXINCLUDE)
- ldflags-y += -T $(srctree)/$(src)/decompress.lds
- OBJECTS = $(obj)/head.o $(obj)/misc.o
--OBJCOPYFLAGS = -O binary --remove-section=.bss
-
- quiet_cmd_image = BUILD $@
- cmd_image = cat $(obj)/decompress.bin $(obj)/piggy.gz > $@
-diff -urN linux-2.6.28/arch/cris/arch-v10/boot/rescue/Makefile linux-2.6.28.my/arch/cris/arch-v10/boot/rescue/Makefile
---- linux-2.6.28/arch/cris/arch-v10/boot/rescue/Makefile 2008-12-25 00:26:37.000000000 +0100
-+++ linux-2.6.28.my/arch/cris/arch-v10/boot/rescue/Makefile 2009-01-12 13:28:40.000000000 +0100
-@@ -5,7 +5,6 @@
- ccflags-y += -O2 $(LINUXINCLUDE)
- asflags-y += $(LINUXINCLUDE)
- ldflags-y += -T $(srctree)/$(src)/rescue.lds
--OBJCOPYFLAGS = -O binary --remove-section=.bss
- obj-$(CONFIG_ETRAX_AXISFLASHMAP) = head.o
- OBJECT := $(obj)/head.o
-
+++ /dev/null
-From d15bd1067b1fcb2b7250d22bc0c7c7fea0b759f7 Mon Sep 17 00:00:00 2001
-From: Justin P. Mattock <justinmattock@gmail.com>
-Date: Sat, 7 Mar 2009 13:31:29 +0100
-Subject: [PATCH] kbuild: fix C libary confusion in unifdef.c due to getline()
-
-This fixes an error when compiling the kernel.
-
- CHK include/linux/version.h
- HOSTCC scripts/unifdef
-scripts/unifdef.c:209: error: conflicting types for 'getline'
-/usr/include/stdio.h:651: note: previous declaration of 'getline' was here
-make[1]: *** [scripts/unifdef] Error 1
-make: *** [__headers] Error 2
-
-Signed-off-by: Justin P. Mattock <justinmattock@gmail.com>
-Cc: Frederic Weisbecker <fweisbec@gmail.com>
-Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
-Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
----
- scripts/unifdef.c | 6 +++---
- 1 files changed, 3 insertions(+), 3 deletions(-)
-
-diff --git a/scripts/unifdef.c b/scripts/unifdef.c
-index 552025e..05a31a6 100644
---- a/scripts/unifdef.c
-+++ b/scripts/unifdef.c
-@@ -206,7 +206,7 @@ static void done(void);
- static void error(const char *);
- static int findsym(const char *);
- static void flushline(bool);
--static Linetype getline(void);
-+static Linetype get_line(void);
- static Linetype ifeval(const char **);
- static void ignoreoff(void);
- static void ignoreon(void);
-@@ -512,7 +512,7 @@ process(void)
-
- for (;;) {
- linenum++;
-- lineval = getline();
-+ lineval = get_line();
- trans_table[ifstate[depth]][lineval]();
- debug("process %s -> %s depth %d",
- linetype_name[lineval],
-@@ -526,7 +526,7 @@ process(void)
- * help from skipcomment().
- */
- static Linetype
--getline(void)
-+get_line(void)
- {
- const char *cp;
- int cursym;
---
-1.6.3.3
-
+++ /dev/null
-From 5e0675efcec309617ba2d334c68ddb250ef942b2 Mon Sep 17 00:00:00 2001
-From: Peter Korsgaard <jacmet@sunsite.dk>
-Date: Fri, 27 Nov 2009 11:20:54 +0100
-Subject: [PATCH] scsi: use __uX types for headers exported to user space
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-Commit 9e4f5e29 (FC Pass Thru support) exported a number of header files
-in include/scsi to user space, but didn't change the uX types to the
-userspace-compatible __uX types. Without that you'll get compile errors
-when including them - E.G.:
-
-/tmp/include/scsi/scsi.h:145: error: expected specifier-qualifier-list
-before ‘u8’
-
-Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
----
- include/scsi/scsi.h | 8 ++++----
- include/scsi/scsi_netlink.h | 20 ++++++++++----------
- 2 files changed, 14 insertions(+), 14 deletions(-)
-
-diff --git a/include/scsi/scsi.h b/include/scsi/scsi.h
-index 34c46ab..b3cffec 100644
---- a/include/scsi/scsi.h
-+++ b/include/scsi/scsi.h
-@@ -145,10 +145,10 @@ struct scsi_cmnd;
-
- /* defined in T10 SCSI Primary Commands-2 (SPC2) */
- struct scsi_varlen_cdb_hdr {
-- u8 opcode; /* opcode always == VARIABLE_LENGTH_CMD */
-- u8 control;
-- u8 misc[5];
-- u8 additional_cdb_length; /* total cdb length - 8 */
-+ __u8 opcode; /* opcode always == VARIABLE_LENGTH_CMD */
-+ __u8 control;
-+ __u8 misc[5];
-+ __u8 additional_cdb_length; /* total cdb length - 8 */
- __be16 service_action;
- /* service specific data follows */
- };
-diff --git a/include/scsi/scsi_netlink.h b/include/scsi/scsi_netlink.h
-index 536752c..7445c46 100644
---- a/include/scsi/scsi_netlink.h
-+++ b/include/scsi/scsi_netlink.h
-@@ -105,8 +105,8 @@ struct scsi_nl_host_vendor_msg {
- * PCI : ID data is the 16 bit PCI Registered Vendor ID
- */
- #define SCSI_NL_VID_TYPE_SHIFT 56
--#define SCSI_NL_VID_TYPE_MASK ((u64)0xFF << SCSI_NL_VID_TYPE_SHIFT)
--#define SCSI_NL_VID_TYPE_PCI ((u64)0x01 << SCSI_NL_VID_TYPE_SHIFT)
-+#define SCSI_NL_VID_TYPE_MASK ((__u64)0xFF << SCSI_NL_VID_TYPE_SHIFT)
-+#define SCSI_NL_VID_TYPE_PCI ((__u64)0x01 << SCSI_NL_VID_TYPE_SHIFT)
- #define SCSI_NL_VID_ID_MASK (~ SCSI_NL_VID_TYPE_MASK)
-
-
-
---
-1.6.5
-
--- /dev/null
+From 5e0675efcec309617ba2d334c68ddb250ef942b2 Mon Sep 17 00:00:00 2001
+From: Peter Korsgaard <jacmet@sunsite.dk>
+Date: Fri, 27 Nov 2009 11:20:54 +0100
+Subject: [PATCH] scsi: use __uX types for headers exported to user space
+MIME-Version: 1.0
+Content-Type: text/plain; charset=UTF-8
+Content-Transfer-Encoding: 8bit
+
+Commit 9e4f5e29 (FC Pass Thru support) exported a number of header files
+in include/scsi to user space, but didn't change the uX types to the
+userspace-compatible __uX types. Without that you'll get compile errors
+when including them - E.G.:
+
+/tmp/include/scsi/scsi.h:145: error: expected specifier-qualifier-list
+before ‘u8’
+
+Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
+---
+ include/scsi/scsi.h | 8 ++++----
+ include/scsi/scsi_netlink.h | 20 ++++++++++----------
+ 2 files changed, 14 insertions(+), 14 deletions(-)
+
+diff --git a/include/scsi/scsi.h b/include/scsi/scsi.h
+index 34c46ab..b3cffec 100644
+--- a/include/scsi/scsi.h
++++ b/include/scsi/scsi.h
+@@ -145,10 +145,10 @@ struct scsi_cmnd;
+
+ /* defined in T10 SCSI Primary Commands-2 (SPC2) */
+ struct scsi_varlen_cdb_hdr {
+- u8 opcode; /* opcode always == VARIABLE_LENGTH_CMD */
+- u8 control;
+- u8 misc[5];
+- u8 additional_cdb_length; /* total cdb length - 8 */
++ __u8 opcode; /* opcode always == VARIABLE_LENGTH_CMD */
++ __u8 control;
++ __u8 misc[5];
++ __u8 additional_cdb_length; /* total cdb length - 8 */
+ __be16 service_action;
+ /* service specific data follows */
+ };
+diff --git a/include/scsi/scsi_netlink.h b/include/scsi/scsi_netlink.h
+index 536752c..7445c46 100644
+--- a/include/scsi/scsi_netlink.h
++++ b/include/scsi/scsi_netlink.h
+@@ -105,8 +105,8 @@ struct scsi_nl_host_vendor_msg {
+ * PCI : ID data is the 16 bit PCI Registered Vendor ID
+ */
+ #define SCSI_NL_VID_TYPE_SHIFT 56
+-#define SCSI_NL_VID_TYPE_MASK ((u64)0xFF << SCSI_NL_VID_TYPE_SHIFT)
+-#define SCSI_NL_VID_TYPE_PCI ((u64)0x01 << SCSI_NL_VID_TYPE_SHIFT)
++#define SCSI_NL_VID_TYPE_MASK ((__u64)0xFF << SCSI_NL_VID_TYPE_SHIFT)
++#define SCSI_NL_VID_TYPE_PCI ((__u64)0x01 << SCSI_NL_VID_TYPE_SHIFT)
+ #define SCSI_NL_VID_ID_MASK (~ SCSI_NL_VID_TYPE_MASK)
+
+
+
+--
+1.6.5
+
+++ /dev/null
-From 877aa0313e7d22b88d04ebef76392e1688fffff9 Mon Sep 17 00:00:00 2001
-From: Peter Korsgaard <jacmet@sunsite.dk>
-Date: Fri, 27 Nov 2009 11:20:54 +0100
-Subject: [PATCH] scsi: use __uX types for headers exported to user space
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-Commit 9e4f5e29 (FC Pass Thru support) exported a number of header files
-in include/scsi to user space, but didn't change the uX types to the
-userspace-compatible __uX types. Without that you'll get compile errors
-when including them - E.G.:
-
-/tmp/include/scsi/scsi.h:145: error: expected specifier-qualifier-list
-before ‘u8’
-
-Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
----
- include/scsi/scsi.h | 8 ++++----
- include/scsi/scsi_netlink.h | 4 ++--
- 2 files changed, 6 insertions(+), 6 deletions(-)
-
-diff --git a/include/scsi/scsi.h b/include/scsi/scsi.h
-index 8b4deca..ec3053e 100644
---- a/include/scsi/scsi.h
-+++ b/include/scsi/scsi.h
-@@ -149,10 +149,10 @@ struct scsi_cmnd;
-
- /* defined in T10 SCSI Primary Commands-2 (SPC2) */
- struct scsi_varlen_cdb_hdr {
-- u8 opcode; /* opcode always == VARIABLE_LENGTH_CMD */
-- u8 control;
-- u8 misc[5];
-- u8 additional_cdb_length; /* total cdb length - 8 */
-+ __u8 opcode; /* opcode always == VARIABLE_LENGTH_CMD */
-+ __u8 control;
-+ __u8 misc[5];
-+ __u8 additional_cdb_length; /* total cdb length - 8 */
- __be16 service_action;
- /* service specific data follows */
- };
-diff --git a/include/scsi/scsi_netlink.h b/include/scsi/scsi_netlink.h
-index 536752c..58ce8fe 100644
---- a/include/scsi/scsi_netlink.h
-+++ b/include/scsi/scsi_netlink.h
-@@ -105,8 +105,8 @@ struct scsi_nl_host_vendor_msg {
- * PCI : ID data is the 16 bit PCI Registered Vendor ID
- */
- #define SCSI_NL_VID_TYPE_SHIFT 56
--#define SCSI_NL_VID_TYPE_MASK ((u64)0xFF << SCSI_NL_VID_TYPE_SHIFT)
--#define SCSI_NL_VID_TYPE_PCI ((u64)0x01 << SCSI_NL_VID_TYPE_SHIFT)
-+#define SCSI_NL_VID_TYPE_MASK ((__u64)0xFF << SCSI_NL_VID_TYPE_SHIFT)
-+#define SCSI_NL_VID_TYPE_PCI ((__u64)0x01 << SCSI_NL_VID_TYPE_SHIFT)
- #define SCSI_NL_VID_ID_MASK (~ SCSI_NL_VID_TYPE_MASK)
-
-
---
-1.7.0
-
--- /dev/null
+From 877aa0313e7d22b88d04ebef76392e1688fffff9 Mon Sep 17 00:00:00 2001
+From: Peter Korsgaard <jacmet@sunsite.dk>
+Date: Fri, 27 Nov 2009 11:20:54 +0100
+Subject: [PATCH] scsi: use __uX types for headers exported to user space
+MIME-Version: 1.0
+Content-Type: text/plain; charset=UTF-8
+Content-Transfer-Encoding: 8bit
+
+Commit 9e4f5e29 (FC Pass Thru support) exported a number of header files
+in include/scsi to user space, but didn't change the uX types to the
+userspace-compatible __uX types. Without that you'll get compile errors
+when including them - E.G.:
+
+/tmp/include/scsi/scsi.h:145: error: expected specifier-qualifier-list
+before ‘u8’
+
+Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
+---
+ include/scsi/scsi.h | 8 ++++----
+ include/scsi/scsi_netlink.h | 4 ++--
+ 2 files changed, 6 insertions(+), 6 deletions(-)
+
+diff --git a/include/scsi/scsi.h b/include/scsi/scsi.h
+index 8b4deca..ec3053e 100644
+--- a/include/scsi/scsi.h
++++ b/include/scsi/scsi.h
+@@ -149,10 +149,10 @@ struct scsi_cmnd;
+
+ /* defined in T10 SCSI Primary Commands-2 (SPC2) */
+ struct scsi_varlen_cdb_hdr {
+- u8 opcode; /* opcode always == VARIABLE_LENGTH_CMD */
+- u8 control;
+- u8 misc[5];
+- u8 additional_cdb_length; /* total cdb length - 8 */
++ __u8 opcode; /* opcode always == VARIABLE_LENGTH_CMD */
++ __u8 control;
++ __u8 misc[5];
++ __u8 additional_cdb_length; /* total cdb length - 8 */
+ __be16 service_action;
+ /* service specific data follows */
+ };
+diff --git a/include/scsi/scsi_netlink.h b/include/scsi/scsi_netlink.h
+index 536752c..58ce8fe 100644
+--- a/include/scsi/scsi_netlink.h
++++ b/include/scsi/scsi_netlink.h
+@@ -105,8 +105,8 @@ struct scsi_nl_host_vendor_msg {
+ * PCI : ID data is the 16 bit PCI Registered Vendor ID
+ */
+ #define SCSI_NL_VID_TYPE_SHIFT 56
+-#define SCSI_NL_VID_TYPE_MASK ((u64)0xFF << SCSI_NL_VID_TYPE_SHIFT)
+-#define SCSI_NL_VID_TYPE_PCI ((u64)0x01 << SCSI_NL_VID_TYPE_SHIFT)
++#define SCSI_NL_VID_TYPE_MASK ((__u64)0xFF << SCSI_NL_VID_TYPE_SHIFT)
++#define SCSI_NL_VID_TYPE_PCI ((__u64)0x01 << SCSI_NL_VID_TYPE_SHIFT)
+ #define SCSI_NL_VID_ID_MASK (~ SCSI_NL_VID_TYPE_MASK)
+
+
+--
+1.7.0
+
projects / buildroot.git / commitdiff