Suppress $anyseq warnings

diff --git a/techlibs/xilinx/abc_map.v b/techlibs/xilinx/abc_map.v
index f23ec6463eacc0a8644fd4d01dbf167984b13daa..1b7900af8cd227e2e0a90daefc59c0c25f4763a9 100644 (file)
--- a/techlibs/xilinx/abc_map.v
+++ b/techlibs/xilinx/abc_map.v
@@ -305,29 +305,36 @@ __CELL__ #(
                // Disconnect the A-input if MREG is enabled, since
                //   combinatorial path is broken
         if (AREG == 0 && MREG == 0 && PREG == 0)
-            assign iA = A;
+            assign iA = A, pA = 1'bx;
         else
             \$__ABC_DSP48E1_REG rA (.I(A), .O(iA), .Q(pA));
         if (BREG == 0 && MREG == 0 && PREG == 0)
-            assign iB = B;
+            assign iB = B, pB = 1'bx;
         else
             \$__ABC_DSP48E1_REG rB (.I(B), .O(iB), .Q(pB));
         if (CREG == 0 && PREG == 0)
-            assign iC = C;
+            assign iC = C, pC = 1'bx;
         else
             \$__ABC_DSP48E1_REG rC (.I(C), .O(iC), .Q(pC));
         if (DREG == 0)
             assign iD = D;
         else if (techmap_guard)
                        $error("Invalid DSP48E1 configuration: DREG enabled but USE_DPORT == \"FALSE\"");
+        assign pD = 1'bx;
         if (ADREG == 1 && techmap_guard)
-                       $error("Invalid DSP48E1 configuration: ADREG enabled but USE_DPORT == \"FALSE\"");
+            $error("Invalid DSP48E1 configuration: ADREG enabled but USE_DPORT == \"FALSE\"");
+        assign pAD = 1'bx;
                if (PREG == 0) begin
+            assign pP = 1'bx;
                        if (MREG == 1)
                                \$__ABC_DSP48E1_REG rM (.Q(pM));
+            else
+                assign pM = 1'bx;
                end
-               else
+        else begin
             \$__ABC_DSP48E1_REG rP (.Q(pP));
+            assign pM = 1'bx;
+        end
 
         \$__ABC_DSP48E1_MULT_P_MUX muxP (
             .Aq(pA), .Bq(pB), .Cq(pC), .Dq(pD), .ADq(pAD), .Mq(pM), .P(oP), .Pq(pP), .O(P)
@@ -350,26 +357,31 @@ __CELL__ #(
                // Disconnect the A-input if MREG is enabled, since
                //   combinatorial path is broken
         if (AREG == 0 && ADREG == 0 && MREG == 0 && PREG == 0)
-            assign iA = A;
+            assign iA = A, pA = 1'bx;
         else
             \$__ABC_DSP48E1_REG rA (.I(A), .O(iA), .Q(pA));
         if (BREG == 0 && MREG == 0 && PREG == 0)
-            assign iB = B;
+            assign iB = B, pB = 1'bx;
         else
             \$__ABC_DSP48E1_REG rB (.I(B), .O(iB), .Q(pB));
         if (CREG == 0 && PREG == 0)
-            assign iC = C;
+            assign iC = C, pC = 1'bx;
         else
             \$__ABC_DSP48E1_REG rC (.I(C), .O(iC), .Q(pC));
         if (DREG == 0 && ADREG == 0)
-            assign iD = D;
+            assign iD = D, pD = 1'bx;
         else
             \$__ABC_DSP48E1_REG rD (.I(D), .O(iD), .Q(pD));
                if (PREG == 0) begin
                        if (MREG == 1)
                                \$__ABC_DSP48E1_REG rM (.Q(pM));
-            else if (ADREG == 1)
-                \$__ABC_DSP48E1_REG rAD (.Q(pAD));
+            else begin
+                assign pM = 1'bx;
+                if (ADREG == 1)
+                    \$__ABC_DSP48E1_REG rAD (.Q(pAD));
+                else
+                    assign pAD = 1'bx;
+            end
                end
                else
             \$__ABC_DSP48E1_REG rP (.Q(pP));
@@ -395,25 +407,30 @@ __CELL__ #(
                // Disconnect the A-input if MREG is enabled, since
                //   combinatorial path is broken
         if (AREG == 0 && PREG == 0)
-            assign iA = A;
+            assign iA = A, pA = 1'bx;
         else
             \$__ABC_DSP48E1_REG rA (.I(A), .O(iA), .Q(pA));
         if (BREG == 0 && PREG == 0)
-            assign iB = B;
+            assign iB = B, pB = 1'bx;
         else
             \$__ABC_DSP48E1_REG rB (.I(B), .O(iB), .Q(pB));
         if (CREG == 0 && PREG == 0)
-            assign iC = C;
+            assign iC = C, pC = 1'bx;
         else
             \$__ABC_DSP48E1_REG rC (.I(C), .O(iC), .Q(pC));
         if (MREG == 1 && techmap_guard)
-                       $error("Invalid DSP48E1 configuration: MREG enabled but USE_MULT == \"NONE\"");
+            $error("Invalid DSP48E1 configuration: MREG enabled but USE_MULT == \"NONE\"");
+        assign pM = 1'bx;
         if (DREG == 1 && techmap_guard)
                        $error("Invalid DSP48E1 configuration: DREG enabled but USE_DPORT == \"FALSE\"");
+        assign pD = 1'bx;
         if (ADREG == 1 && techmap_guard)
                        $error("Invalid DSP48E1 configuration: ADREG enabled but USE_DPORT == \"FALSE\"");
+        assign pAD = 1'bx;
                if (PREG == 1)
             \$__ABC_DSP48E1_REG rP (.Q(pP));
+        else
+            assign pP = 1'bx;
 
         \$__ABC_DSP48E1_P_MUX muxP (
             .Aq(pA), .Bq(pB), .Cq(pC), .Dq(pD), .ADq(pAD), .Mq(pM), .P(oP), .Pq(pP), .O(P)