bool "libao"
help
Libao is a cross-platform audio library that allows programs
- to output audio using a simple API on a wide variety of platforms.
+ to output audio using a simple API on a wide variety of
+ platforms.
http://www.xiph.org/ao/
The libcap-ng library is intended to make programming with
posix capabilities much easier than the traditional libcap
library. It includes utilities that can analyse all currently
- running applications and print out any capabilities and whether
- or not it has an open ended bounding set.
+ running applications and print out any capabilities and
+ whether or not it has an open ended bounding set.
http://people.redhat.com/sgrubb/libcap-ng/
config BR2_PACKAGE_LIBCOAP
bool "libcoap"
help
- libcoap is a C implementation of a lightweight application-protocol
- for devices that are constrained their resources such as computing
- power, RF range, memory, bandwith, or network packet sizes. This
- protocol, CoAP, is standardized by the IETF as RFC 7252. For further
- information related to CoAP, see <http://coap.technology>.
+ libcoap is a C implementation of a lightweight
+ application-protocol for devices that are constrained their
+ resources such as computing power, RF range, memory, bandwith,
+ or network packet sizes. This protocol, CoAP, is standardized
+ by the IETF as RFC 7252. For further information related to
+ CoAP, see <http://coap.technology>.
https://github.com/obgm/libcoap
depends on !BR2_STATIC_LIBS
help
A replacement for memcpy and memset functionality for the
- Raspberry Pi with the intention of gaining greater performance.
+ Raspberry Pi with the intention of gaining greater
+ performance.
https://github.com/simonjhall/copies-and-fills
config BR2_PACKAGE_LIBCURL
bool "libcurl"
help
- cURL is a tool for getting files from FTP, HTTP, Gopher, Telnet,
- and Dict servers, using any of the supported protocols.
+ cURL is a tool for getting files from FTP, HTTP, Gopher,
+ Telnet, and Dict servers, using any of the supported
+ protocols.
http://curl.haxx.se/
config BR2_PACKAGE_LIBDMTX
bool "libdmtx"
help
- libdmtx is a software library that enables programs to read and write
- Data Matrix barcodes of the modern ECC200 variety.
+ libdmtx is a software library that enables programs to read
+ and write Data Matrix barcodes of the modern ECC200 variety.
http://www.libdmtx.org/
config BR2_PACKAGE_LIBDNET
bool "libdnet"
help
- libdnet - simplified interface to low-level networking routines.
+ libdnet - simplified interface to low-level networking
+ routines.
http://libdnet.sourceforge.net/
config BR2_PACKAGE_LIBDVBCSA
bool "libdvbcsa"
help
- libdvbcsa is a free implementation of the DVB Common Scrambling
- Algorithm - DVB/CSA - with encryption and decryption capabilities
+ libdvbcsa is a free implementation of the DVB Common
+ Scrambling Algorithm - DVB/CSA - with encryption and
+ decryption capabilities
- As libdvbcsa implements a standard, it is completely legal to use it.
+ As libdvbcsa implements a standard, it is completely legal to
+ use it.
http://www.videolan.org/developers/libdvbcsa.html
depends on BR2_TOOLCHAIN_HAS_THREADS
help
libdvbpsi is a simple library designed for decoding and
- generation of MPEG TS and DVB PSI tables according to standards
- ISO/IEC 13818 and ITU-T H.222.0.
+ generation of MPEG TS and DVB PSI tables according to
+ standards ISO/IEC 13818 and ITU-T H.222.0.
http://www.videolan.org/developers/libdvbpsi.html
depends on BR2_USE_WCHAR
depends on BR2_TOOLCHAIN_HAS_THREADS
help
- C++ parsing library for Service Information (SI) in DVB systems.
- With libdvbsi++ you can convert raw DVB service information to
- a set of C++ objects, removing the need to parse data manually.
+ C++ parsing library for Service Information (SI) in DVB
+ systems. With libdvbsi++ you can convert raw DVB service
+ information to a set of C++ objects, removing the need to
+ parse data manually.
http://www.saftware.de/
http://ftp.netbsd.org/pub/NetBSD/NetBSD-release-5-0/src/lib/libedit/
Jess Thrysoee maintains an autotoolified package, which we use
- in Buildroot as it makes it much simpler than using the upstream
- sources which require pmake.
+ in Buildroot as it makes it much simpler than using the
+ upstream sources which require pmake.
http://www.thrysoee.dk/editline
Its aim is to provide:
- a small library with essential json handling functions
- - sufficiently good json support (not 100% standards compliant)
+ - sufficiently good json support (not 100% standards
+ compliant)
- be very fast in processing
https://github.com/rsyslog/libfastjson/
help
FreeGLUT is a free-software/open-source alternative to the
OpenGL Utility Toolkit (GLUT) library. GLUT (and hence
- FreeGLUT) takes care of all the system-specific chores required
- for creating windows, initializing OpenGL contexts, and
- handling input events, to allow for trully portable OpenGL
+ FreeGLUT) takes care of all the system-specific chores
+ required for creating windows, initializing OpenGL contexts,
+ and handling input events, to allow for trully portable OpenGL
programs.
http://freeglut.sourceforge.net
select BR2_PACKAGE_XLIB_LIBXI
select BR2_PACKAGE_XLIB_LIBXMU
help
- The OpenGL Extension Wrangler Library (GLEW) is a cross-platform C/C++
- extension loading library. GLEW provides efficient run-time mechanisms
- for determining which OpenGL extensions are supported on the target
- platform. OpenGL core and extension functionality is exposed in a
- single header file.
+ The OpenGL Extension Wrangler Library (GLEW) is a
+ cross-platform C/C++ extension loading library. GLEW provides
+ efficient run-time mechanisms for determining which OpenGL
+ extensions are supported on the target platform. OpenGL core
+ and extension functionality is exposed in a single header
+ file.
http://glew.sourceforge.net
bool "Broadway GDK backend"
default y
help
- This enables the Broadway backend for GDK, which provides support
- for displaying GTK+ applications in a web browser, using HTML5 and
- web sockets.
+ This enables the Broadway backend for GDK, which provides
+ support for displaying GTK+ applications in a web browser,
+ using HTML5 and web sockets.
For example, to run gtk3-demo on a target which IP address is
- 192.168.0.1 and use it from a web browser, execute the following
- commands:
+ 192.168.0.1 and use it from a web browser, execute the
+ following commands:
$ broadwayd -a 192.168.0.1 -p 8080 :2 &
$ export GDK_BACKEND=broadway
depends on BR2_USE_WCHAR
select BR2_TARGET_TZ_INFO
help
- libical is an Open Source (MPL/LGPL) implementation of the IETF's
- iCalendar Calendaring and Scheduling protocols.
+ libical is an Open Source (MPL/LGPL) implementation of the
+ IETF's iCalendar Calendaring and Scheduling protocols.
http://libical.github.io/libical
config BR2_PACKAGE_LIBISCSI
bool "libiscsi"
help
- Libiscsi is a client-side library to implement the iSCSI protocol
- that can be used to access resource of an iSCSI Target.
+ Libiscsi is a client-side library to implement the iSCSI
+ protocol that can be used to access resource of an iSCSI
+ Target.
- The library is fully async with regards to iscsi commands and scsi
- tasks, but a sync layer is also provided for ease of use for simpler
- applications.
+ The library is fully async with regards to iscsi commands and
+ scsi tasks, but a sync layer is also provided for ease of use
+ for simpler applications.
https://github.com/sahlberg/libiscsi (no proper homepage)
bool "liblinear"
depends on BR2_INSTALL_LIBSTDCPP
help
- liblinear is a linear classifier for data with millions of instances
- and features.
+ liblinear is a linear classifier for data with millions of
+ instances and features.
http://www.csie.ntu.edu.tw/~cjlin/liblinear/
help
Log4c is a library of C for flexible logging to files, syslog
and other destinations.
- This version is with localtime patch, to make lib show times in
- local timezone.
+ This version is with localtime patch, to make lib show times
+ in local timezone.
https://github.com/rcmadruga/log4c-localtime
http://log4c.sourceforge.net/
config BR2_PACKAGE_LIBMAD
bool "libmad"
help
- High-quality MPEG audio decoder. All computations are performed
- with fixed-point integer arithmetic, making it ideal for systems
- without a floating-point unit.
+ High-quality MPEG audio decoder. All computations are
+ performed with fixed-point integer arithmetic, making it ideal
+ for systems without a floating-point unit.
http://www.underbit.com/products/mad/
select BR2_PACKAGE_LIBGLIB2
help
libmbim is a glib-based library for talking to WWAN modems and
- devices which speak the Mobile Interface Broadband Model (MBIM)
- protocol.
+ devices which speak the Mobile Interface Broadband Model
+ (MBIM) protocol.
http://www.freedesktop.org/wiki/Software/libmbim/
config BR2_PACKAGE_LIBMBUS
bool "libmbus"
help
- libmbus is a library for communicating with energy metering devices.
- It supports TCP and RS232 M-bus gateways.
+ libmbus is a library for communicating with energy metering
+ devices. It supports TCP and RS232 M-bus gateways.
(M-bus standard: http://www.m-bus.com/)
http://www.rscada.se/libmbus/
config BR2_PACKAGE_LIBMCRYPT
bool "libmcrypt"
help
- libmcrypt is a library that provides uniform interface to access
- several encryption algorithms.
+ libmcrypt is a library that provides uniform interface to
+ access several encryption algorithms.
http://mcrypt.sourceforge.net/
help
Mhash is a free (under GNU Lesser GPL) library which provides
a uniform interface to a large number of hash algorithms.
- These algorithms can be used to compute checksums, message digests,
- and other signatures.
+ These algorithms can be used to compute checksums, message
+ digests, and other signatures.
http://mhash.sourceforge.net/
depends on !BR2_STATIC_LIBS
help
The UPnP protocol is supported by most home adsl/cable routers
- and Microsoft Windows 2K/XP. The aim of the MiniUPnP project is
- to bring a free software solution to support the "Internet
+ and Microsoft Windows 2K/XP. The aim of the MiniUPnP project
+ is to bring a free software solution to support the "Internet
Gateway Device" part of the protocol.
Miniupnpc aims at the simplest library possible, with the
config BR2_PACKAGE_LIBMODBUS
bool "libmodbus"
help
- libmodbus is a free software library to send/receive data according
- to the Modbus protocol. This library is written in C and supports
- RTU (serial) and TCP (Ethernet) communications.
+ libmodbus is a free software library to send/receive data
+ according to the Modbus protocol. This library is written in C
+ and supports RTU (serial) and TCP (Ethernet) communications.
http://libmodbus.org
config BR2_PACKAGE_LIBMPDCLIENT
bool "libmpdclient"
help
- A stable, documented, asynchronous API library for interfacing MPD
- in the C, C++ & Objective C languages.
+ A stable, documented, asynchronous API library for interfacing
+ MPD in the C, C++ & Objective C languages.
http://www.musicpd.org/libs/libmpdclient/
select BR2_PACKAGE_LIBMNL
help
libnetfilter_cthelper is the userspace library that provides
- the programming interface to the user-space helper infrastructure
- available since Linux kernel 3.6.
+ the programming interface to the user-space helper
+ infrastructure available since Linux kernel 3.6.
http://www.netfilter.org/projects/libnetfilter_cthelper/
select BR2_PACKAGE_LIBUSB
select BR2_PACKAGE_LIBUSB_COMPAT
help
- Public platform independent Near Field Communication (NFC) library.
+ Public platform independent Near Field Communication (NFC)
+ library.
http://www.libnfc.org/
select BR2_PACKAGE_OPENSSL
help
liboauth is a collection of c functions implementing the oAuth
- Core 1.0 Rev A standard API. liboauth provides basic functions to
- escape and encode parameters according to oAuth specs and offers
- high-level functions to sign requests or verify signatures.
+ Core 1.0 Rev A standard API. liboauth provides basic functions
+ to escape and encode parameters according to oAuth specs and
+ offers high-level functions to sign requests or verify
+ signatures.
http://liboauth.sourceforge.net/
bool "libpcap"
select BR2_PACKAGE_ZLIB
help
- A system-independent library for user-level network packet capture.
+ A system-independent library for user-level network packet
+ capture.
http://www.tcpdump.org/
depends on !BR2_STATIC_LIBS
select BR2_PACKAGE_LIBUSB
help
- The libphidget library provides an API for controlling Phidgets
- USB devices. The library translates API function calls to libusb
- function calls to control attached Phidgets devices that provide
- GPIO's, DAC's, accelerometers, servo motors, and other capabilities
- either singly or on combo devices.
+ The libphidget library provides an API for controlling
+ Phidgets USB devices. The library translates API function
+ calls to libusb function calls to control attached Phidgets
+ devices that provide GPIO's, DAC's, accelerometers, servo
+ motors, and other capabilities either singly or on combo
+ devices.
To use libphidget for controlling locally attached devices you
need to set up the userspace USB device tree /dev/bus/usb. See
file udev/99-phidgets.rules.
- The libphidget library also contains an API for sending commands
- to a local or remote phidgetwebservice using HTTP. The
- phidgetwebservice then translates HTTP requests to libphidget API
- function calls to control locally attached Phidgets devices.
+ The libphidget library also contains an API for sending
+ commands to a local or remote phidgetwebservice using HTTP.
+ The phidgetwebservice then translates HTTP requests to
+ libphidget API function calls to control locally attached
+ Phidgets devices.
http://phidgets.com/
config BR2_PACKAGE_LIBPLATFORM
bool
help
- Platform support library used by libCEC and binary add-ons for Kodi
+ Platform support library used by libCEC and binary add-ons for
+ Kodi
https://github.com/Pulse-Eight/platform
bool "libplayer"
depends on BR2_TOOLCHAIN_HAS_THREADS
help
- libplayer provides a generic A/V API that relies on various multimedia
- player for Linux systems. It currently supports MPlayer, xine VLC and
- GStreamer only
+ libplayer provides a generic A/V API that relies on various
+ multimedia player for Linux systems. It currently supports
+ MPlayer, xine VLC and GStreamer only
http://libplayer.geexbox.org/
bool "libpthsem"
depends on BR2_USE_MMU # fork()
help
- GNU pth is a user mode multi threading library. pthsem is an extend
- version, with support for semaphores added.
+ GNU pth is a user mode multi threading library. pthsem is an
+ extend version, with support for semaphores added.
http://www.auto.tuwien.ac.at/~mkoegler/pth/
depends on BR2_USE_MMU # libglib2
select BR2_PACKAGE_LIBGLIB2
help
- libqmi is a glib-based library for talking to WWAN modems and devices
- which speak the Qualcomm MSM Interface (QMI) protocol.
+ libqmi is a glib-based library for talking to WWAN modems and
+ devices which speak the Qualcomm MSM Interface (QMI) protocol.
http://www.freedesktop.org/wiki/Software/libqmi/
depends on BR2_powerpc || BR2_powerpc64 || BR2_powerpc64le
depends on BR2_TOOLCHAIN_USES_GLIBC
help
- The librtas package provides an interface for Run-Time Abstraction
- Services (RTAS) calls on PAPR platforms. The libraries allow users to
- examine and manipulate hardware, and parse RTAS events.
+ The librtas package provides an interface for Run-Time
+ Abstraction Services (RTAS) calls on PAPR platforms.
+ The libraries allow users to examine and manipulate hardware,
+ and parse RTAS events.
http://librtas.sourceforge.net/
help
High level interface to the Linux Kernel's seccomp filter
- The libseccomp library provides an easy to use, platform independent,
- interface to the Linux Kernel's syscall filtering mechanism: seccomp.
- The libseccomp API is designed to abstract away the underlying BPF
- based syscall filter language and present a more conventional
- function-call based filtering interface that should be familiar to,
- and easily adopted by application developers.
+ The libseccomp library provides an easy to use, platform
+ independent, interface to the Linux Kernel's syscall filtering
+ mechanism: seccomp. The libseccomp API is designed to abstract
+ away the underlying BPF based syscall filter language and
+ present a more conventional function-call based filtering
+ interface that should be familiar to, and easily adopted by
+ application developers.
https://github.com/seccomp/libseccomp
depends on BR2_USE_MMU # libglib2
select BR2_PACKAGE_LIBGLIB2
help
- libsecret is a library for storing and retrieving passwords and other
- secrets. It communicates with the "Secret Service" using DBus.
- gnome-keyring and ksecretservice are both implementations of a Secret
- Service.
+ libsecret is a library for storing and retrieving passwords
+ and other secrets. It communicates with the "Secret Service"
+ using DBus. gnome-keyring and ksecretservice are both
+ implementations of a Secret Service.
https://wiki.gnome.org/Libsecret
depends on BR2_USE_WCHAR # boost
select BR2_PACKAGE_BOOST
help
- Simplified serial port programming in C++ under POSIX operating
- systems.
+ Simplified serial port programming in C++ under POSIX
+ operating systems.
http://libserial.sourceforge.net/
select BR2_PACKAGE_LIBOGG
select BR2_PACKAGE_LIBVORBIS
help
- Libshout is a library for communicating with and sending data to an
- icecast server. It handles the socket connection, the timing of the
- data, and prevents bad data from getting to the icecast server.
+ Libshout is a library for communicating with and sending data
+ to an icecast server. It handles the socket connection, the
+ timing of the data, and prevents bad data from getting to the
+ icecast server.
http://icecast.org/download/
bool "libsidplay2"
depends on BR2_INSTALL_LIBSTDCPP
help
- Sidplay 2 is the second in the Sidplay series originally developed by
- Michael Schwendt. This version is written by Simon White and is cycle
- accurate for improved sound reproduction. Sidplay 2 is capable of
- playing all C64 mono and stereo file formats.
+ Sidplay 2 is the second in the Sidplay series originally
+ developed by Michael Schwendt. This version is written by
+ Simon White and is cycle accurate for improved sound
+ reproduction. Sidplay 2 is capable of playing all C64 mono and
+ stereo file formats.
http://sourceforge.net/projects/sidplay2
depends on BR2_TOOLCHAIN_GCC_AT_LEAST_4_8 # C++11
depends on BR2_INSTALL_LIBSTDCPP
help
- libsigc++ implements a typesafe callback system for standard C++.
- It allows you to define signals and to connect those signals to
- any callback function, either global or a member function,
- regardless of whether it is static or virtual.
+ libsigc++ implements a typesafe callback system for standard
+ C++. It allows you to define signals and to connect those
+ signals to any callback function, either global or a member
+ function, regardless of whether it is static or virtual.
http://libsigc.sourceforge.net/
config BR2_PACKAGE_LIBSNDFILE
bool "libsndfile"
help
- Libsndfile is a C library for reading and writing files containing
- sampled sound (such as MS Windows WAV and the Apple/SGI AIFF format)
- through one standard library interface.
+ Libsndfile is a C library for reading and writing files
+ containing sampled sound (such as MS Windows WAV and the
+ Apple/SGI AIFF format) through one standard library interface.
http://www.mega-nerd.com/libsndfile/
config BR2_PACKAGE_LIBSYSFS
bool "libsysfs"
help
- These are a set of utilities built upon sysfs, a filesystem in
- Linux 2.6 kernels that exposes a system's device tree.
+ These are a set of utilities built upon sysfs, a filesystem in
+ Linux 2.6 kernels that exposes a system's device tree.
http://linux-diag.sourceforge.net/Sysfsutils.html
select BR2_PACKAGE_LIBOGG
select BR2_PACKAGE_LIBVORBIS
help
- A library for the free and open video compression format "Theora"
- from the Xiph.org Foundation.
+ A library for the free and open video compression format
+ "Theora" from the Xiph.org Foundation.
http://www.theora.org/
select BR2_PACKAGE_LIBTOMMATH
help
LibTomCrypt is a fairly comprehensive, modular and portable
- cryptographic toolkit that provides developers with a vast array
- of well known published block ciphers, one-way hash functions,
- chaining modes, pseudo-random number generators, public key
- cryptography and a plethora of other routines.
+ cryptographic toolkit that provides developers with a vast
+ array of well known published block ciphers, one-way hash
+ functions, chaining modes, pseudo-random number generators,
+ public key cryptography and a plethora of other routines.
http://www.libtom.net
config BR2_PACKAGE_LIBTOOL
bool "libtool"
help
- Library that hides the complexity of using shared/static libraries
- on different platforms behind a consistent, portable interface.
+ Library that hides the complexity of using shared/static
+ libraries on different platforms behind a consistent, portable
+ interface.
http://www.gnu.org/software/libtool/
bool "libupnp"
depends on BR2_TOOLCHAIN_HAS_THREADS
help
- The portable SDK for UPnP(tm) Devices (libupnp) provides developers
- with an API and open source code for building control points,
- devices, and bridges that are compliant with Version 1.0 of the
- Universal Plug and Play Device Architecture Specification
+ The portable SDK for UPnP(tm) Devices (libupnp) provides
+ developers with an API and open source code for building
+ control points, devices, and bridges that are compliant with
+ Version 1.0 of the Universal Plug and Play Device Architecture
+ Specification
http://pupnp.sourceforge.net/
select BR2_PACKAGE_LIBCURL
select BR2_PACKAGE_LIBUPNP
help
- The libupnpp C++ library wraps libupnp for easier use by upmpdcli and
- upplay.
+ The libupnpp C++ library wraps libupnp for easier use by
+ upmpdcli and upplay.
http://www.lesbonscomptes.com/upmpdcli/
On ARM, because of bug:
http://gcc.gnu.org/bugzilla/show_bug.cgi?id=58854
- liburcu cannot be built using gcc 4.8.0, 4.8.1 or 4.8.2 without the
- following bug fix:
+ liburcu cannot be built using gcc 4.8.0, 4.8.1 or 4.8.2
+ without the following bug fix:
http://gcc.gnu.org/viewcvs/gcc?view=revision&revision=204665
http://lttng.org/urcu
config BR2_PACKAGE_LIBURIPARSER
bool "liburiparser"
help
- uriparser is a strictly RFC 3986 compliant URI parsing and handling
- library written in C.
+ uriparser is a strictly RFC 3986 compliant URI parsing and
+ handling library written in C.
http://uriparser.sourceforge.net
select BR2_PACKAGE_ARGP_STANDALONE if BR2_TOOLCHAIN_USES_UCLIBC || BR2_TOOLCHAIN_USES_MUSL
select BR2_PACKAGE_LIBICONV if !BR2_ENABLE_LOCALE
help
- libv4l is a collection of libraries which adds a thin abstraction
- layer on top of video4linux2 devices. libv4l consists of 3 different
- libraries: libv4lconvert, libv4l1 and libv4l2.
+ libv4l is a collection of libraries which adds a thin
+ abstraction layer on top of video4linux2 devices. libv4l
+ consists of 3 different libraries: libv4lconvert, libv4l1 and
+ libv4l2.
http://linuxtv.org/wiki/index.php/V4l-utils
config BR2_PACKAGE_LIBV4L_UTILS
bool "v4l-utils tools"
help
- v4l-utils is a collection of various video4linux and DVB utilities.
+ v4l-utils is a collection of various video4linux and DVB
+ utilities.
Enable this if you want to build the following tools:
- cx18-ctl
- dvb-fe-tool, dvbv5-zap, dvbv5-scan, dvb-format-convert
select BR2_PACKAGE_XLIB_LIBXEXT if BR2_PACKAGE_XORG7
select BR2_PACKAGE_XLIB_LIBXFIXES if BR2_PACKAGE_XORG7
help
- The main motivation for VA-API (Video Acceleration API) is to enable
- hardware accelerated video decode/encode at various entry-points (VLD,
- IDCT, Motion Compensation etc.) for the prevailing coding standards
- today (MPEG-2, MPEG-4 ASP/H.263, MPEG-4 AVC/H.264, and VC-1/VMW3).
+ The main motivation for VA-API (Video Acceleration API) is to
+ enable hardware accelerated video decode/encode at various
+ entry-points (VLD, IDCT, Motion Compensation etc.) for the
+ prevailing coding standards today (MPEG-2, MPEG-4 ASP/H.263,
+ MPEG-4 AVC/H.264, and VC-1/VMW3).
https://01.org/linuxmedia/vaapi
select BR2_PACKAGE_LIBOGG
help
Library for the Vorbis open source audio decoder
- Ogg Vorbis is a fully open, non-proprietary, patent-and-royalty-free,
- general-purpose compressed audio format for mid to high quality
- (8kHz-48.0kHz, 16+ bit, polyphonic) audio and music at fixed and
- variable bitrates from 16 to 128 kbps/channel.
+ Ogg Vorbis is a fully open, non-proprietary,
+ patent-and-royalty-free, general-purpose compressed audio
+ format for mid to high quality (8kHz-48.0kHz, 16+ bit,
+ polyphonic) audio and music at fixed and variable bitrates
+ from 16 to 128 kbps/channel.
This places Vorbis in the same competitive class as audio
- representations such as MPEG-4 (AAC), and similar to, but higher
- performance than MPEG-1/2 audio layer 3, MPEG-4 audio (TwinVQ),
- WMA and PAC.
+ representations such as MPEG-4 (AAC), and similar to, but
+ higher performance than MPEG-1/2 audio layer 3, MPEG-4 audio
+ (TwinVQ), WMA and PAC.
depends on !BR2_STATIC_LIBS # dlsym()
select BR2_PACKAGE_ZLIB
help
- C library for reading, creating, and modifying zip archives. This
- package also contains zipcmp, ziptorrent and zipmerge utilities.
+ C library for reading, creating, and modifying zip archives.
+ This package also contains zipcmp, ziptorrent and zipmerge
+ utilities.
http://www.nih.at/libzip/
projects / buildroot.git / commitdiff