--- /dev/null
+CONFIG_EXPERIMENTAL=y
+# CONFIG_LOCALVERSION_AUTO is not set
+CONFIG_SYSVIPC=y
+CONFIG_POSIX_MQUEUE=y
+CONFIG_NO_HZ=y
+CONFIG_HIGH_RES_TIMERS=y
+CONFIG_BSD_PROCESS_ACCT=y
+CONFIG_BSD_PROCESS_ACCT_V3=y
+CONFIG_RCU_FANOUT=32
+CONFIG_IKCONFIG=y
+CONFIG_IKCONFIG_PROC=y
+CONFIG_CGROUPS=y
+CONFIG_CGROUP_DEBUG=y
+CONFIG_CGROUP_FREEZER=y
+CONFIG_CGROUP_DEVICE=y
+CONFIG_CPUSETS=y
+CONFIG_CGROUP_CPUACCT=y
+CONFIG_RESOURCE_COUNTERS=y
+CONFIG_MEMCG=y
+CONFIG_MEMCG_SWAP=y
+CONFIG_MEMCG_KMEM=y
+CONFIG_CGROUP_SCHED=y
+CONFIG_RT_GROUP_SCHED=y
+CONFIG_BLK_CGROUP=y
+CONFIG_NAMESPACES=y
+CONFIG_BLK_DEV_INITRD=y
+CONFIG_EMBEDDED=y
+CONFIG_PROFILING=y
+CONFIG_OPROFILE=y
+CONFIG_KPROBES=y
+CONFIG_MODULES=y
+CONFIG_MODULE_UNLOAD=y
+CONFIG_PARTITION_ADVANCED=y
+CONFIG_SMP=y
+CONFIG_MATOM=y
+CONFIG_SCHED_SMT=y
+CONFIG_PREEMPT=y
+CONFIG_X86_REROUTE_FOR_BROKEN_BOOT_IRQS=y
+CONFIG_X86_CHECK_BIOS_CORRUPTION=y
+# CONFIG_MTRR_SANITIZER is not set
+CONFIG_EFI=y
+CONFIG_EFI_STUB=y
+CONFIG_HZ_1000=y
+CONFIG_PM_RUNTIME=y
+CONFIG_PM_DEBUG=y
+CONFIG_PM_ADVANCED_DEBUG=y
+CONFIG_CPU_FREQ=y
+CONFIG_CPU_FREQ_GOV_ONDEMAND=y
+CONFIG_X86_ACPI_CPUFREQ=y
+CONFIG_INTEL_IDLE=y
+CONFIG_PCI_MMCONFIG=y
+CONFIG_PCIEPORTBUS=y
+CONFIG_PCI_MSI=y
+CONFIG_HOTPLUG_PCI=y
+CONFIG_NET=y
+CONFIG_PACKET=y
+CONFIG_UNIX=y
+CONFIG_XFRM_SUB_POLICY=y
+CONFIG_NET_KEY_MIGRATE=y
+CONFIG_INET=y
+CONFIG_IP_MULTICAST=y
+CONFIG_IP_ADVANCED_ROUTER=y
+CONFIG_IP_MULTIPLE_TABLES=y
+CONFIG_IP_ROUTE_MULTIPATH=y
+CONFIG_IP_ROUTE_VERBOSE=y
+CONFIG_IP_PNP=y
+CONFIG_IP_PNP_DHCP=y
+CONFIG_IP_PNP_BOOTP=y
+CONFIG_IP_PNP_RARP=y
+CONFIG_DEVTMPFS=y
+CONFIG_DEVTMPFS_MOUNT=y
+CONFIG_FW_LOADER=m
+CONFIG_BLK_DEV_LOOP=y
+CONFIG_BLK_DEV_CRYPTOLOOP=m
+CONFIG_BLK_DEV_RAM=y
+CONFIG_PCH_PHUB=m
+CONFIG_BLK_DEV_SD=y
+CONFIG_BLK_DEV_SR=y
+CONFIG_CHR_DEV_SG=y
+CONFIG_ATA=y
+CONFIG_SATA_AHCI=y
+CONFIG_NETDEVICES=y
+CONFIG_DUMMY=m
+CONFIG_NETCONSOLE=y
+CONFIG_TUN=m
+CONFIG_PCH_GBE=m
+CONFIG_INPUT_EVDEV=y
+# CONFIG_KEYBOARD_ATKBD is not set
+CONFIG_KEYBOARD_GPIO_POLLED=y
+# CONFIG_MOUSE_PS2 is not set
+# CONFIG_SERIO_I8042 is not set
+CONFIG_SERIAL_8250=y
+CONFIG_SERIAL_8250_CONSOLE=y
+CONFIG_SERIAL_PCH_UART=y
+CONFIG_SERIAL_PCH_UART_CONSOLE=y
+CONFIG_GEN_RTC=y
+CONFIG_GEN_RTC_X=y
+CONFIG_HPET=y
+CONFIG_I2C=y
+CONFIG_I2C_CHARDEV=m
+CONFIG_I2C_EG20T=m
+CONFIG_SPI=y
+CONFIG_SPI_GPIO=m
+CONFIG_SPI_TOPCLIFF_PCH=m
+CONFIG_SPI_SPIDEV=m
+CONFIG_GPIOLIB=y
+CONFIG_DEBUG_GPIO=y
+CONFIG_GPIO_SYSFS=y
+CONFIG_GPIO_GENERIC_PLATFORM=y
+CONFIG_GPIO_SCH=y
+CONFIG_GPIO_PCH=y
+CONFIG_WATCHDOG=y
+CONFIG_SOFT_WATCHDOG=m
+CONFIG_AGP=m
+CONFIG_DRM=m
+CONFIG_FB=y
+CONFIG_FB_EFI=y
+CONFIG_BACKLIGHT_LCD_SUPPORT=y
+CONFIG_BACKLIGHT_CLASS_DEVICE=y
+CONFIG_FRAMEBUFFER_CONSOLE=y
+CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY=y
+CONFIG_SOUND=m
+CONFIG_SND=m
+CONFIG_SND_HDA_INTEL=m
+CONFIG_USB=y
+CONFIG_USB_SUSPEND=y
+CONFIG_USB_EHCI_HCD=y
+CONFIG_USB_EHCI_ROOT_HUB_TT=y
+CONFIG_USB_OHCI_HCD=y
+CONFIG_USB_STORAGE=y
+CONFIG_USB_GADGET=m
+CONFIG_USB_EG20T=m
+CONFIG_MMC=y
+CONFIG_MMC_SDHCI=y
+CONFIG_MMC_SDHCI_PCI=y
+CONFIG_NEW_LEDS=y
+CONFIG_LEDS_CLASS=y
+CONFIG_LEDS_GPIO=y
+CONFIG_LEDS_TRIGGERS=y
+CONFIG_LEDS_TRIGGER_TIMER=y
+CONFIG_LEDS_TRIGGER_ONESHOT=y
+CONFIG_LEDS_TRIGGER_HEARTBEAT=y
+CONFIG_LEDS_TRIGGER_BACKLIGHT=y
+CONFIG_LEDS_TRIGGER_CPU=y
+CONFIG_LEDS_TRIGGER_GPIO=y
+CONFIG_LEDS_TRIGGER_DEFAULT_ON=y
+CONFIG_DMADEVICES=y
+CONFIG_PCH_DMA=y
+CONFIG_MINNOWBOARD=y
+CONFIG_MINNOWBOARD_GPIO=m
+CONFIG_MINNOWBOARD_KEYS=m
+CONFIG_EFI_VARS=y
+CONFIG_EXT4_FS=y
+CONFIG_EXT4_FS_POSIX_ACL=y
+CONFIG_EXT4_FS_SECURITY=y
+CONFIG_FANOTIFY=y
+CONFIG_FANOTIFY_ACCESS_PERMISSIONS=y
+CONFIG_ISO9660_FS=y
+CONFIG_MSDOS_FS=y
+CONFIG_VFAT_FS=y
+CONFIG_PROC_KCORE=y
+CONFIG_TMPFS=y
+CONFIG_TMPFS_POSIX_ACL=y
+CONFIG_CONFIGFS_FS=m
+CONFIG_NFS_FS=y
+CONFIG_NFS_V4=y
+CONFIG_ROOT_NFS=y
+CONFIG_PRINTK_TIME=y
+CONFIG_FRAME_WARN=1024
+CONFIG_TIMER_STATS=y
+CONFIG_LATENCYTOP=y
+CONFIG_BLK_DEV_IO_TRACE=y
--- /dev/null
+Prepare the SD card for the Minnow Board
+========================================
+
+ 1. Partition the SD card with a GPT partition table
+
+ sudo cgdisk /dev/mmcblk0
+
+ Create two partitions:
+
+ a) First partition of a few dozens of megabytes, which will be
+ used to store the bootloader and the kernel image. Type must
+ be EF00 (EFI partition).
+
+ b) Second partition of any size, which will be used to store the
+ root filesystem. Type must be 8300 (Linux filesystem)
+
+ 2. Prepare the boot partition
+
+ We will format it, mount it, copy the EFI data generated by
+ Buildroot, and the kernel image.
+
+ sudo mkfs.vfat -F 32 -n boot /dev/mmcblk0p1
+ sudo mount /dev/mmcblk0p1 /mnt
+ sudo cp -a output/images/efi-part/* /mnt/
+ sudo cp output/images/bzImage /mnt/
+ sudo umount /mnt
+
+ 3. Prepare the root partition
+
+ We will format it, mount it, and extract the root filesystem.
+
+ sudo mkfs.ext3 -L root /dev/mmcblk0p2
+ sudo mount /dev/mmcblk0p2 /mnt
+ sudo tar -C /mnt -xf output/images/rootfs.tar
+ sudo umount /mnt
+
+ 4. Enjoy
+
+Additional informations about this board can be found at
+http://www.minnowboard.org/.
--- /dev/null
+# Architecture
+BR2_x86_64=y
+BR2_x86_atom=y
+
+# Misc
+BR2_TARGET_GENERIC_GETTY_PORT="ttyPCH0"
+BR2_ROOTFS_POST_BUILD_SCRIPT="board/minnowboard/post-build.sh"
+
+# Lock to 3.8 headers
+BR2_KERNEL_HEADERS_VERSION=y
+BR2_DEFAULT_KERNEL_VERSION="3.8"
+
+# Linux kernel
+BR2_LINUX_KERNEL=y
+BR2_LINUX_KERNEL_CUSTOM_GIT=y
+BR2_LINUX_KERNEL_CUSTOM_REPO_URL="git://git.yoctoproject.org/linux-yocto-3.8"
+BR2_LINUX_KERNEL_CUSTOM_REPO_VERSION="ba1587b9b62c801d161897303aa6d22809485f9b"
+BR2_LINUX_KERNEL_USE_CUSTOM_CONFIG=y
+BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="board/minnowboard/linux-3.8.config"
+
+# Bootloader
+BR2_TARGET_GRUB2=y
+BR2_TARGET_GRUB2_I386_EFI=y
projects / buildroot.git / commitdiff