This defconfig was added in October 2016 and was never updated since
then. It currently fails to build because U-Boot is too old and
doesn't build with host-openssl in version 1.1.x.
On February 13, 2019, the original submitter was notified, but didn't
reply, so let's remove the defconfig for this platform.
Fixes:
https://gitlab.com/buildroot.org/buildroot/-/jobs/
165766194
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
zynq_microzed_defconfig: { extends: .defconfig }
zynq_zc706_defconfig: { extends: .defconfig }
zynq_zed_defconfig: { extends: .defconfig }
-zynq_zybo_defconfig: { extends: .defconfig }
zynqmp_zcu106_defconfig: { extends: .defconfig }
tests.boot.test_atf.TestATFAllwinner: { extends: .runtime_test }
tests.boot.test_atf.TestATFMarvell: { extends: .runtime_test }
F: package/python-flask-login/
F: package/qt5/qt5charts/
-N: Sebastien Van Cauwenberghe <svancau@gmail.com>
-F: board/digilent/zybo/
-F: configs/zynq_zybo_defconfig
-
N: Semyon Kolganov <semenak94@mail.ru>
F: package/fmt/
F: package/libbson/
+++ /dev/null
-image boot.vfat {
- vfat {
- files = {
- "BOOT.BIN",
- "uEnv.txt",
- "system.bit",
- "zynq-zybo.dtb",
- "u-boot-dtb.img",
- "uImage"
- }
- }
- size = 32M
-}
-
-image sdcard.img {
- hdimage {
- }
-
- partition boot {
- partition-type = 0xC
- bootable = "true"
- image = "boot.vfat"
- }
-
- partition rootfs {
- partition-type = 0x83
- image = "rootfs.ext4"
- }
-}
+++ /dev/null
-#!/bin/sh
-
-BOARD_DIR="$(dirname $0)"
-GENIMAGE_CFG="${BOARD_DIR}/genimage.cfg"
-GENIMAGE_TMP="${BUILD_DIR}/genimage.tmp"
-OUTPUT_DIR="${O}/images"
-
-rm -rf "${GENIMAGE_TMP}"
-
-cp board/digilent/zybo/uEnv.txt ${BINARIES_DIR}
-cp board/digilent/zybo/system.bit ${BINARIES_DIR}
-
-genimage \
- --rootpath "${TARGET_DIR}" \
- --tmppath "${GENIMAGE_TMP}" \
- --inputpath "${BINARIES_DIR}" \
- --outputpath "${BINARIES_DIR}" \
- --config "${GENIMAGE_CFG}"
+++ /dev/null
-Digilent Zybo
-=============
-
-This is the Buildroot board support for the Digilent Zybo. The Zybo is
-a development board based on the Xilinx Zynq-7000 based All-Programmable
-System-On-Chip.
-
-Zybo information including schematics, reference designs, and manuals are
-available from http://store.digilentinc.com/zybo-zynq-7000-arm-fpga-soc-trainer-board/ .
-
-If you want a custom FPGA bitstream to be loaded by U-Boot, copy it as
-system.bit in board/digilent/zybo/.
-
-Steps to create a working system for Zybo:
-
-1) make zynq_zybo_defconfig
-2) make
-3) write your SD Card with the sdcard.img file using dd by doing
- $ sudo dd if=output/images/sdcard.img of=/dev/sdX
-4) insert the SD Card and power up your Zybo
-5) Expect serial console on the second USB serial port exposed by the board
-
-The expected output:
-
- U-Boot SPL 2016.05 (May 20 2016 - 16:16:24)
- mmc boot
- Trying to boot from MMC1
- reading system.dtb
- spl_load_image_fat_os: error reading image system.dtb, err - -1
- reading u-boot-dtb.img
- reading u-boot-dtb.img
-
-
- U-Boot 2016.05 (May 20 2016 - 16:16:24 +0200)
-
- Model: Zynq ZYBO Development Board
- Board: Xilinx Zynq
- I2C: ready
- DRAM: ECC disabled 512 MiB
- MMC: sdhci@e0100000: 0
- SF: Detected S25FL128S_64K with page size 256 Bytes, erase size 64 KiB, total 16 MiB
- In: serial@e0001000
- Out: serial@e0001000
- Err: serial@e0001000
- Model: Zynq ZYBO Development Board
- Board: Xilinx Zynq
- Net: ZYNQ GEM: e000b000, phyaddr 0, interface rgmii-id
- I2C EEPROM MAC address read failed
-
- Warning: ethernet@e000b000 (eth0) using random MAC address - 56:64:dd:a7:6d:94
- eth0: ethernet@e000b000
- ...
-
-Resulting system
-----------------
-Once the build process is finished you will have an image called "sdcard.img"
-in the output/images/ directory.
-
-The first partition is a FAT32 partition created at the beginning of the SD Card
-that contains the following files :
- /BOOT.BIN
- /zynq-zybo.dtb
- /uEnv.txt
- /system.bit
- /uImage
- /u-boot-dtb.img
-
-The second partition is an ext4 partition that contains the root filesystem.
-
-You can alter the booting procedure by modifying the uEnv.txt file
-in first partition of the SD card. It is a plain text file in format
-<key>=<value> one per line:
-
-kernel_image=myimage
-modeboot=myboot
-myboot=...
+++ /dev/null
-bootargs=root=/dev/mmcblk0p2 rootwait rw rootfstype=ext4
-fpga_image=system.bit
-fpgaboot=if fatload mmc 0 0x1000000 ${fpga_image}; then echo Booting FPGA from ${fpga_image}; fpga info 0 && fpga loadb 0 0x1000000 $filesize; else echo FPGA image ${fpga_image} was not found, skipping...; fi;
-kernel_image=uImage
-sdboot=echo Booting from SD...; run fpgaboot; fatload mmc 0 0x1000000 ${kernel_image} && fatload mmc 0 0x2000000 zynq-zybo.dtb && bootm 0x1000000 - 0x2000000
+++ /dev/null
-BR2_arm=y
-BR2_cortex_a9=y
-BR2_ARM_ENABLE_NEON=y
-BR2_ARM_ENABLE_VFP=y
-BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_6=y
-BR2_TARGET_GENERIC_GETTY_PORT="ttyPS0"
-BR2_ROOTFS_POST_IMAGE_SCRIPT="board/digilent/zybo/post-image.sh"
-BR2_LINUX_KERNEL=y
-BR2_LINUX_KERNEL_CUSTOM_VERSION=y
-BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="4.6.4"
-BR2_LINUX_KERNEL_DEFCONFIG="multi_v7"
-BR2_LINUX_KERNEL_UIMAGE=y
-BR2_LINUX_KERNEL_UIMAGE_LOADADDR="0x8000"
-BR2_LINUX_KERNEL_DTS_SUPPORT=y
-BR2_LINUX_KERNEL_INTREE_DTS_NAME="zynq-zybo"
-BR2_TARGET_ROOTFS_EXT2=y
-BR2_TARGET_ROOTFS_EXT2_4=y
-BR2_TARGET_UBOOT=y
-BR2_TARGET_UBOOT_BUILD_SYSTEM_KCONFIG=y
-BR2_TARGET_UBOOT_CUSTOM_VERSION=y
-BR2_TARGET_UBOOT_CUSTOM_VERSION_VALUE="2016.05"
-BR2_TARGET_UBOOT_BOARD_DEFCONFIG="zynq_zybo"
-BR2_TARGET_UBOOT_NEEDS_DTC=y
-BR2_TARGET_UBOOT_NEEDS_OPENSSL=y
-BR2_TARGET_UBOOT_FORMAT_DTB_IMG=y
-BR2_TARGET_UBOOT_SPL=y
-BR2_TARGET_UBOOT_ZYNQ_IMAGE=y
-BR2_PACKAGE_HOST_DOSFSTOOLS=y
-BR2_PACKAGE_HOST_GENIMAGE=y
-BR2_PACKAGE_HOST_MTOOLS=y
projects / buildroot.git / commitdiff