configure gdb/gnulib with --disable-largefile if largefile support disabled.

This patch mostly aims at fixing a GDB build failure on 32bit Solaris
systems (Sparc and x86), due to a recent gnulib update adding the
readlink module. But it might also fix related issues when configuring
with --disable-largefile.

A side-effect of the gnulib readlink module addition is that it caused
largefile support to be added as well, and in particular
gnulib/import/m4/largefile.m4 introduced the following new #define in
gnulib's config.in:

| +/* Number of bits in a file offset, on hosts where this is settable. */
| +#undef _FILE_OFFSET_BITS

When defined to 64, it triggers an issue with procfs.h while trying
to build sparc-sol2-nat.c:

| #if !defined(_LP64) && _FILE_OFFSET_BITS == 64
| #error  "Cannot use procfs in the large file compilation environment"
| #endif

As it turns out, this is a fairly familiar problem, and one of
the reasons behind ACX_LARGEFILE having been created. In that macro,
we have some code which disables largefile support on solaris hosts:

|   sparc-*-solaris*|i[3-7]86-*-solaris*)
| changequote([,])dnl
|     # On native 32bit sparc and ia32 solaris, large-file and procfs support
|     # are mutually exclusive; and without procfs support, the bfd/ elf module
|     # cannot provide certain routines such as elfcore_write_prpsinfo
|     # or elfcore_write_prstatus.  So unless the user explicitly requested
|     # large-file support through the --enable-largefile switch, disable
|     # large-file support in favor of procfs support.
|     test "${target}" = "${host}" -a "x$plugins" = xno \
|       && : ${enable_largefile="no"}
|     ;;

But gnulib ignores this fact, and so tries to determine how to
enable large-file support irrespective of whether we want it or not.
This patch fixes the issue by passing --disable-largefile to gnulib's
configure when large-file support in GDB is disabled. This is done
by first enhancing ACX_CONFIGURE_DIR to allow us to pass extra
arguments to be passed to the configure command, and then by modifying
GDB's configure to pass --disable-largefile if large-file support
is disabled.

gdb/ChangeLog:

	* acx_configure_dir.m4 (ACX_CONFIGURE_DIR): Add support for
        new "EXTRA-ARGS" parameter.
	* configure.ac: If large-file support is disabled in GDB,
        pass --disable-largefile to ACX_CONFIGURE_DIR call for "gnulib".
	* configure: Regenerate.

gdb/gdbserver/ChangeLog:

	* configure.ac: If large-file support is disabled in GDBserver,
        pass --disable-largefile to ACX_CONFIGURE_DIR call for "gnulib".
        * configure: Regenerate.

Tested by rebuilding on sparc-solaris and x86_64-linux (with gdbserver).
This fixes the build failure on sparc-solaris. I also verified in
gnulib's config.log file that we pass --disable-largefile in the solaris
case, while we do not in the GNU/Linux case.

diff --git a/gdb/acx_configure_dir.m4 b/gdb/acx_configure_dir.m4
index 5a76ebad6ecabaf03dbf401e636a69b6e49b5f5e..f5ae3a296ac2215792fb82347541818f0a5c104e 100644 (file)
--- a/gdb/acx_configure_dir.m4
+++ b/gdb/acx_configure_dir.m4
@@ -4,7 +4,7 @@
 # unlimited permission to copy and/or distribute it, with or without
 # modifications, as long as this notice is preserved.
 
-# ACX_CONFIGURE_DIR(SRC-DIR-NAME, BUILD-DIR-NAME)
+# ACX_CONFIGURE_DIR(SRC-DIR-NAME, BUILD-DIR-NAME, EXTRA-ARGS)
 # ---------------------------
 #
 # Configure a subdirectory.  This is an alternative to
@@ -16,11 +16,14 @@
 # Inputs:
 #   - SRC-DIR-NAME is the source directory, relative to $srcdir.
 #   - BUILD-DIR-NAME is `top-build -> build'
+#   - EXTRA-ARGS is an optional list of extra arguments to add
+#     at the end of the configure command.
 
 AC_DEFUN([ACX_CONFIGURE_DIR],
 [
   in_src=$1
   in_build=$2
+  in_extra_args=$3
 
   # Remove --cache-file, --srcdir, and --disable-option-checking arguments
   # so they do not pile up.
@@ -105,6 +108,11 @@ AC_DEFUN([ACX_CONFIGURE_DIR],
     ac_sub_cache_file=$ac_top_build_prefix$cache_file ;;
   esac
 
+  if test -n "$in_extra_args"; then
+    # Add the extra args at the end.
+    ac_sub_configure_args="$ac_sub_configure_args $in_extra_args"
+  fi
+
   AC_MSG_NOTICE([running $SHELL $ac_sub_configure $ac_sub_configure_args --cache-file=$ac_sub_cache_file --srcdir=$ac_srcdir])
   # The eval makes quoting arguments work.
   eval "\$SHELL \"\$ac_sub_configure\" $ac_sub_configure_args \

diff --git a/gdb/configure b/gdb/configure
index 5f52e914dcacd30a5f414d74c6cf6bec6d9c48d7..89852304d52b640a98f90674d8c8921418300f3c 100755 (executable)
--- a/gdb/configure
+++ b/gdb/configure
@@ -4835,6 +4835,12 @@ $as_echo "no" >&6; }
 fi
 
 
+gnulib_extra_configure_args=
+# If large-file support is disabled, make sure gnulib does the same.
+if test "$enable_largefile" = no; then
+gnulib_extra_configure_args="$gnulib_extra_configure_args --disable-largefile"
+fi
+
 # Configure gnulib.  We need to build gnulib under some other
 # directory not "gnulib", to avoid the problem of both GDB and
 # GDBserver wanting to build it in the same directory, when building
@@ -4842,6 +4848,7 @@ fi
 
   in_src="gnulib"
   in_build="build-gnulib"
+  in_extra_args="$gnulib_extra_configure_args"
 
   # Remove --cache-file, --srcdir, and --disable-option-checking arguments
   # so they do not pile up.
@@ -4926,6 +4933,11 @@ fi
     ac_sub_cache_file=$ac_top_build_prefix$cache_file ;;
   esac
 
+  if test -n "$in_extra_args"; then
+    # Add the extra args at the end.
+    ac_sub_configure_args="$ac_sub_configure_args $in_extra_args"
+  fi
+
   { $as_echo "$as_me:${as_lineno-$LINENO}: running $SHELL $ac_sub_configure $ac_sub_configure_args --cache-file=$ac_sub_cache_file --srcdir=$ac_srcdir" >&5
 $as_echo "$as_me: running $SHELL $ac_sub_configure $ac_sub_configure_args --cache-file=$ac_sub_cache_file --srcdir=$ac_srcdir" >&6;}
   # The eval makes quoting arguments work.

diff --git a/gdb/configure.ac b/gdb/configure.ac
index 84232f2fbc83aa284ff4684803dd325f12b616a2..c933e3fd53192d3a7bae006a95b878f499ee011d 100644 (file)
--- a/gdb/configure.ac
+++ b/gdb/configure.ac
@@ -51,11 +51,18 @@ esac
 AM_CONDITIONAL(GMAKE, test "$MAKE_IS_GNU" = yes)
 AC_PROG_MAKE_SET
 
+gnulib_extra_configure_args=
+# If large-file support is disabled, make sure gnulib does the same.
+if test "$enable_largefile" = no; then
+gnulib_extra_configure_args="$gnulib_extra_configure_args --disable-largefile"
+fi
+
 # Configure gnulib.  We need to build gnulib under some other
 # directory not "gnulib", to avoid the problem of both GDB and
 # GDBserver wanting to build it in the same directory, when building
 # in the source dir.
-ACX_CONFIGURE_DIR(["gnulib"], ["build-gnulib"])
+ACX_CONFIGURE_DIR(["gnulib"], ["build-gnulib"],
+                  ["$gnulib_extra_configure_args"])
 
 dnl List of object files and targets accumulated by configure.
 

diff --git a/gdb/gdbserver/configure b/gdb/gdbserver/configure
index 45838f5385609f3e7584800d61955ddd3d297e24..45efc51e4b066d6698d6d355b4215354b9ad00c3 100755 (executable)
--- a/gdb/gdbserver/configure
+++ b/gdb/gdbserver/configure
@@ -4514,6 +4514,12 @@ $as_echo "no" >&6; }
 fi
 
 
+gnulib_extra_configure_args=
+# If large-file support is disabled, make sure gnulib does the same.
+if test "$enable_largefile" = no; then
+gnulib_extra_configure_args="$gnulib_extra_configure_args --disable-largefile"
+fi
+
 # Configure gnulib.  We can't use AC_CONFIG_SUBDIRS as that'd expect
 # to find the the source subdir to be configured directly under
 # gdbserver/.  We need to build gnulib under some other directory not
@@ -4522,6 +4528,7 @@ fi
 
   in_src="../gnulib"
   in_build="build-gnulib-gdbserver"
+  in_extra_args="$gnulib_extra_configure_args"
 
   # Remove --cache-file, --srcdir, and --disable-option-checking arguments
   # so they do not pile up.
@@ -4606,6 +4613,11 @@ fi
     ac_sub_cache_file=$ac_top_build_prefix$cache_file ;;
   esac
 
+  if test -n "$in_extra_args"; then
+    # Add the extra args at the end.
+    ac_sub_configure_args="$ac_sub_configure_args $in_extra_args"
+  fi
+
   { $as_echo "$as_me:${as_lineno-$LINENO}: running $SHELL $ac_sub_configure $ac_sub_configure_args --cache-file=$ac_sub_cache_file --srcdir=$ac_srcdir" >&5
 $as_echo "$as_me: running $SHELL $ac_sub_configure $ac_sub_configure_args --cache-file=$ac_sub_cache_file --srcdir=$ac_srcdir" >&6;}
   # The eval makes quoting arguments work.
@@ -4619,6 +4631,7 @@ $as_echo "$as_me: running $SHELL $ac_sub_configure $ac_sub_configure_args --cach
 
   in_src="../../libiberty"
   in_build="build-libiberty-gdbserver"
+  in_extra_args=
 
   # Remove --cache-file, --srcdir, and --disable-option-checking arguments
   # so they do not pile up.
@@ -4703,6 +4716,11 @@ $as_echo "$as_me: running $SHELL $ac_sub_configure $ac_sub_configure_args --cach
     ac_sub_cache_file=$ac_top_build_prefix$cache_file ;;
   esac
 
+  if test -n "$in_extra_args"; then
+    # Add the extra args at the end.
+    ac_sub_configure_args="$ac_sub_configure_args $in_extra_args"
+  fi
+
   { $as_echo "$as_me:${as_lineno-$LINENO}: running $SHELL $ac_sub_configure $ac_sub_configure_args --cache-file=$ac_sub_cache_file --srcdir=$ac_srcdir" >&5
 $as_echo "$as_me: running $SHELL $ac_sub_configure $ac_sub_configure_args --cache-file=$ac_sub_cache_file --srcdir=$ac_srcdir" >&6;}
   # The eval makes quoting arguments work.

diff --git a/gdb/gdbserver/configure.ac b/gdb/gdbserver/configure.ac
index f59e65b579f0274290be0003c73f0546ab0c1239..c9bb15d4e3bd15d27a7a8183ac17021dd36f281f 100644 (file)
--- a/gdb/gdbserver/configure.ac
+++ b/gdb/gdbserver/configure.ac
@@ -69,12 +69,19 @@ esac
 AM_CONDITIONAL(GMAKE, test "$MAKE_IS_GNU" = yes)
 AC_PROG_MAKE_SET
 
+gnulib_extra_configure_args=
+# If large-file support is disabled, make sure gnulib does the same.
+if test "$enable_largefile" = no; then
+gnulib_extra_configure_args="$gnulib_extra_configure_args --disable-largefile"
+fi
+
 # Configure gnulib.  We can't use AC_CONFIG_SUBDIRS as that'd expect
 # to find the the source subdir to be configured directly under
 # gdbserver/.  We need to build gnulib under some other directory not
 # "gnulib", to avoid the problem of both GDB and GDBserver wanting to
 # build it in the same directory, when building in the source dir.
-ACX_CONFIGURE_DIR(["../gnulib"], ["build-gnulib-gdbserver"])
+ACX_CONFIGURE_DIR(["../gnulib"], ["build-gnulib-gdbserver"],
+                  ["$gnulib_extra_configure_args"])
 
 ACX_CONFIGURE_DIR(["../../libiberty"], ["build-libiberty-gdbserver"])