source "fs/Config.in"
+source "boot/Config.in"
+
source "target/Config.in"
TARGETS+=target-purgelocales
endif
-# target stuff is last so it can override anything else
+include boot/common.mk
include target/Makefile.in
+include fs/common.mk
TARGETS+=erase-fakeroots
--- /dev/null
+menu "Bootloaders"
+
+source "boot/grub/Config.in"
+source "boot/grub2/Config.in"
+source "boot/syslinux/Config.in"
+source "boot/yaboot/Config.in"
+source "boot/u-boot/Config.in"
+source "boot/at91bootstrap/Config.in"
+source "boot/at91dataflashboot/Config.in"
+
+endmenu
+
--- /dev/null
+menuconfig BR2_TARGET_AT91BOOTSTRAP
+ depends on BR2_arm
+ bool "AT91 Bootstrap"
+
+if BR2_TARGET_AT91BOOTSTRAP
+
+config BR2_TARGET_AT91BOOTSTRAP_BOARD
+ string "Bootstrap board"
+ default "$(BOARD_NAME)"
+ help
+ This is used to do a make <board>_config
+
+choice
+ prompt "Boot Memory"
+ default BR2_TARGET_AT91BOOT_DATAFLASHCARD
+ depends on BR2_TARGET_AT91BOOTSTRAP
+ help
+ Select Chip for which AT91 bootstrap should be built
+
+config BR2_TARGET_AT91BOOT_DATAFLASH
+ bool "AT45 Dataflash"
+ depends on BR2_BOOTSOURCE_DATAFLASH
+
+config BR2_TARGET_AT91BOOT_DATAFLASHCARD
+ bool "AT45 Dataflash Card"
+ depends on BR2_BOOTSOURCE_DATAFLASHCARD
+
+config BR2_TARGET_AT91BOOT_NANDFLASH
+ bool "NAND Flash"
+ depends on BR2_BOOTSOURCE_NANDFLASH
+
+config BR2_TARGET_AT91BOOT_FLASH
+ bool "Internal Flash or external parallel flash"
+ depends on BR2_BOOTSOURCE_FLASH
+
+config BR2_TARGET_AT91BOOT_SDCARD
+ bool "SD-Card"
+ depends on BR2_BOOTSOURCE_SDCARD
+
+config BR2_TARGET_AT91BOOT_EEPROM
+ bool "EEPROM"
+ depends on BR2_BOOTSOURCE_EEPROM
+
+endchoice
+
+config BR2_TARGET_AT91BOOTSTRAP_MEMORY
+ string
+ depends on BR2_TARGET_AT91BOOTSTRAP
+ default "dataflash" if BR2_TARGET_AT91BOOT_DATAFLASH
+ default "dataflashcard" if BR2_TARGET_AT91BOOT_DATAFLASHCARD
+ default "nandflash" if BR2_TARGET_AT91BOOT_NANDFLASH
+ default "flash" if BR2_TARGET_AT91BOOT_FLASH
+ default "sdcard" if BR2_TARGET_AT91BOOT_SDCARD
+ default "eeprom" if BR2_TARGET_AT91BOOT_EEPROM
+
+config BR2_AT91BOOTSTRAP_IMG_SIZE
+ string "Image Size to copy to SDRAM"
+ depends on BR2_TARGET_AT91BOOTSTRAP
+ default "0x32000" if BR2_TARGET_AT91BOOT_DATAFLASH
+ default "0x32000" if BR2_TARGET_AT91BOOT_DATAFLASHCARD
+ default "0x30000" if BR2_TARGET_AT91BOOT_NANDFLASH
+ default "0x100000" if BR2_TARGET_AT91BOOT_FLASH
+ default "0x30000" if BR2_TARGET_AT91BOOT_SDCARD
+ default "0x30000" if BR2_TARGET_AT91BOOT_EEPROM
+ help
+ Select the size of your application
+ AT91 Bootstrap will copy this amount from flash to SDRAM
+
+choice
+ prompt "Start address of application"
+ default BR2_AT91BOOTSTRAP_JUMP_TO_DEFAULT
+ depends on BR2_TARGET_AT91BOOTSTRAP
+ help
+ Select Chip for which AT91 bootstrap should be built
+ Currently supports AT91SAM9260EK, AT91SAM9261EK,
+ AT91SAM9XEEK, AT91SAM9263EK
+
+
+config BR2_AT91BOOTSTRAP_JUMP_TO_DEFAULT
+ bool "Copy to the default U-Boot start location in the SDRAM"
+ help
+ This is where you copy the U-Boot boot loader
+
+config BR2_AT91BOOTSTRAP_JUMP_TO_HIGH_SDRAM
+ bool "Copy to the last Megabyte of the SDRAM"
+ help
+ This is where you copy a boot loader
+
+config BR2_AT91BOOTSTRAP_JUMP_TO_START_OF_SDRAM
+ bool "Copy to the start of the SDRAM"
+ help
+ This is where you copy a standalone application
+endchoice
+
+config BR2_AT91BOOTSTRAP_JUMP_ADDR
+ string
+ default "0x23F00000" if BR2_AT91BOOTSTRAP_JUMP_TO_DEFAULT
+ default "0x23F00000" if BR2_AT91BOOTSTRAP_JUMP_TO_HIGH_SDRAM
+ default "0x20000000" if BR2_AT91BOOTSTRAP_JUMP_TO_START_OF_SDRAM
+ depends on BR2_TARGET_AT91BOOTSTRAP
+
+comment "It will be copied to $(BR2_AT91BOOTSTRAP_JUMP_ADDR)"
+ depends on BR2_TARGET_AT91BOOTSTRAP
+
+endif
+
+
+
--- /dev/null
+#############################################################
+#
+# at91bootstrap
+#
+#############################################################
+AT91BOOTSTRAP_VERSION:=2.10
+AT91BOOTSTRAP_PATCH_LEVEL:=
+AT91BOOTSTRAP_PATCHED_VERSION:=$(AT91BOOTSTRAP_VERSION)$(AT91BOOTSTRAP_PATCH_LEVEL)
+AT91BOOTSTRAP_NAME:=at91bootstrap-$(AT91BOOTSTRAP_VERSION)
+ATMEL_MIRROR:=$(call qstrip,$(BR2_ATMEL_MIRROR))
+AT91BOOTSTRAP_SITE:=$(ATMEL_MIRROR)
+AT91BOOTSTRAP_SOURCE:=$(AT91BOOTSTRAP_NAME).tar.bz2
+AT91BOOTSTRAP_DIR:=$(BUILD_DIR)/$(AT91BOOTSTRAP_NAME)
+AT91BOOTSTRAP:=$(call qstrip,$(BR2_AT91BOOTSTRAP))
+AT91BOOTSTRAP_ZCAT:=$(BZCAT)
+
+AT91BOOTSTRAP_BOARD:=$(call qstrip,$(BR2_TARGET_AT91BOOTSTRAP_BOARD))
+
+AT91BOOTSTRAP_MEMORY:=$(call qstrip,$(BR2_TARGET_AT91BOOTSTRAP_MEMORY))
+
+AT91BOOTSTRAP_BINARY:=$(BOARD_NAME)-$(AT91BOOTSTRAP_MEMORY)boot-$(AT91BOOTSTRAP_PATCHED_VERSION).bin
+
+AT91BOOTSTRAP_TARGET:=$(AT91BOOTSTRAP_DIR)/binaries/$(AT91BOOTSTRAP_BINARY)
+
+AT91BOOTSTRAP_JUMP_ADDR:=$(call qstrip,$(BR2_AT91BOOTSTRAP_JUMP_ADDR))
+AT91BOOTSTRAP_IMG_SIZE:=$(call qstrip,$(BR2_AT91BOOTSTRAP_IMG_SIZE))
+
+AT91_CUSTOM_FLAGS:=
+ifneq ($(AT91BOOTSTRAP_JUMP_ADDR),)
+AT91_CUSTOM_FLAGS+=-DJUMP_ADDR=$(AT91BOOTSTRAP_JUMP_ADDR)
+endif
+ifneq ($(AT91BOOTSTRAP_IMG_SIZE),)
+AT91_CUSTOM_FLAGS+=-DIMG_SIZE=$(AT91BOOTSTRAP_IMG_SIZE)
+endif
+
+$(DL_DIR)/$(AT91BOOTSTRAP_SOURCE):
+ $(call DOWNLOAD,$(AT91BOOTSTRAP_SITE),$(AT91BOOTSTRAP_SOURCE))
+
+$(AT91BOOTSTRAP_DIR)/.unpacked: $(DL_DIR)/$(AT91BOOTSTRAP_SOURCE)
+ mkdir -p $(BUILD_DIR)
+ $(AT91BOOTSTRAP_ZCAT) $(DL_DIR)/$(AT91BOOTSTRAP_SOURCE) | tar -C $(BUILD_DIR) $(TAR_OPTIONS) -
+ toolchain/patch-kernel.sh $(AT91BOOTSTRAP_DIR) boot/at91bootstrap/ at91bootstrap-$(AT91BOOTSTRAP_VERSION)\*.patch
+ touch $(AT91BOOTSTRAP_DIR)/.unpacked
+
+$(AT91BOOTSTRAP_DIR)/.configured: $(AT91BOOTSTRAP_DIR)/.unpacked .config
+ $(MAKE) \
+ MEMORY=$(AT91BOOTSTRAP_MEMORY) \
+ CROSS_COMPILE=$(TARGET_CROSS) \
+ -C $(AT91BOOTSTRAP_DIR) \
+ $(AT91BOOTSTRAP_BOARD)_defconfig
+ touch $(AT91BOOTSTRAP_DIR)/.configured
+
+# $(BOARD_NAME)_defconfig
+
+$(AT91BOOTSTRAP_TARGET): $(AT91BOOTSTRAP_DIR)/.configured
+ $(MAKE) \
+ MEMORY=$(AT91BOOTSTRAP_MEMORY) \
+ CROSS_COMPILE=$(TARGET_CROSS) \
+ AT91_CUSTOM_FLAGS="$(AT91_CUSTOM_FLAGS)" \
+ -C $(AT91BOOTSTRAP_DIR)
+
+$(AT91BOOTSTRAP_DIR)/.installed:: $(AT91BOOTSTRAP_TARGET)
+ mkdir -p $(BINARIES_DIR)
+ifeq ($(AT91BOOTSTRAP_VERSION),2.3)
+ cp $(AT91BOOTSTRAP_TARGET) $(BINARIES_DIR)/$(AT91BOOTSTRAP_BINARY)
+ $(call COPY_FILE, $(AT91BOOTSTRAP_TARGET), $(BR2_TARGET_ATMEL_COPYTO), $(AT91BOOTSTRAP_BINARY))
+else
+ make MEMORY=$(AT91BOOTSTRAP_MEMORY) \
+ CROSS_COMPILE=$(TARGET_CROSS) \
+ -C $(AT91BOOTSTRAP_DIR) boot
+ make DESTDIR=$(BINARIES_DIR) -C $(AT91BOOTSTRAP_DIR) install || \
+ echo "Could not copy bootstrap to BINARIES_DIR"
+ifneq ($(BR2_TARGET_ATMEL_COPYTO),)
+ make DESTDIR=$(BR2_TARGET_ATMEL_COPYTO) -C $(AT91BOOTSTRAP_DIR) install || \
+ echo "Could not copy bootstrap to BR2_ATMEL_COPYTO"
+endif
+endif
+ touch $@
+
+# cp $(AT91BOOTSTRAP_TARGET) $(BINARIES_DIR)/$(AT91BOOTSTRAP_BINARY)
+# cp $(AT91BOOTSTRAP_TARGET) $(BR2_TARGET_ATMEL_COPYTO)/$(AT91BOOTSTRAP_BINARY)
+
+.PHONY: at91bootstrap at91bootstrap-source
+
+at91bootstrap: $(AT91BOOTSTRAP_DIR)/.installed
+
+at91bootstrap-source: $(DL_DIR)/$(AT91BOOTSTRAP_SOURCE)
+
+at91bootstrap-unpacked: $(AT91BOOTSTRAP_DIR)/.unpacked
+
+.PHONY: at91bootstrap-clean at91bootstrap-dirclean
+
+at91bootstrap-clean:
+ make -C $(AT91BOOTSTRAP_DIR) clean
+
+at91bootstrap-dirclean:
+ rm -rf $(AT91BOOTSTRAP_DIR)
+
+#############################################################
+#
+# Toplevel Makefile options
+#
+#############################################################
+ifeq ($(BR2_TARGET_AT91BOOTSTRAP),y)
+TARGETS+=at91bootstrap
+endif
+
+at91bootstrap-status:
+ @echo AT91BOOTSTRAP_BOARD=$(AT91BOOTSTRAP_BOARD)
+
--- /dev/null
+menuconfig BR2_TARGET_DATAFLASHBOOT
+ depends on BR2_arm
+ bool "AT91 DataFlashBoot"
+
+choice
+ prompt "Target Architecture"
+ default BR2_TARGET_DATAFLASHBOOT_AT91RM9200
+ depends on BR2_TARGET_DATAFLASHBOOT
+ help
+ Select Chip for which Dataflash boot should be built
+ Currently only AT91RM9200 Supported
+
+config BR2_TARGET_DATAFLASHBOOT_AT91RM9200
+ depends on BR2_TARGET_AT91RM9200
+ bool "AT91RM9200"
+config BR2_TARGET_DATAFLASHBOOT_AT91SAM9261
+ depends on BR2_TARGET_AT91SAM9261
+ bool "AT91SAM9261"
+config BR2_TARGET_DATAFLASHBOOT_AT91SAM9261S
+ depends on BR2_TARGET_AT91SAM9261S
+ bool "AT91SAM9261S"
+
+endchoice
--- /dev/null
+#############################################################
+#
+# DataFlashBoot
+#
+#############################################################
+DATAFLASHBOOT_VERSION:=1.05
+DATAFLASHBOOT_NAME:=DataflashBoot-$(DATAFLASHBOOT_VERSION)
+ATMEL_MIRROR:=$(call qstrip,$(BR2_ATMEL_MIRROR))
+DATAFLASHBOOT_SITE:=$(ATMEL_MIRROR)
+DATAFLASHBOOT_SOURCE:=$(DATAFLASHBOOT_NAME).tar.bz2
+DATAFLASHBOOT_DIR:=$(BUILD_DIR)/$(DATAFLASHBOOT_NAME)
+DATAFLASHBOOT_BINARY:=$(DATAFLASHBOOT_NAME).bin
+
+$(DL_DIR)/$(DATAFLASHBOOT_SOURCE):
+ $(call DOWNLOAD,$(DATAFLASHBOOT_SITE),$(DATAFLASHBOOT_SOURCE))
+
+$(DATAFLASHBOOT_DIR)/.unpacked: $(DL_DIR)/$(DATAFLASHBOOT_SOURCE)
+ mkdir -p $(BUILD_DIR)
+ ls $(DL_DIR)/$(DATAFLASHBOOT_SOURCE)
+ $(BZCAT) $(DL_DIR)/$(DATAFLASHBOOT_SOURCE) | tar -C $(BUILD_DIR) $(TAR_OPTIONS) -
+ touch $(DATAFLASHBOOT_DIR)/.unpacked
+
+$(DATAFLASHBOOT_DIR)/$(DATAFLASHBOOT_BINARY): $(DATAFLASHBOOT_DIR)/.unpacked
+ ls $(DATAFLASHBOOT_DIR)/.unpacked
+ make -C $(DATAFLASHBOOT_DIR) CROSS_COMPILE=$(TARGET_CROSS)
+
+DataflashBoot-clean:
+ make -C $(DATAFLASHBOOT_DIR) clean
+
+DataflashBoot-dirclean:
+ rm -rf $(DATAFLASHBOOT_DIR)
+
+dataflash: $(DATAFLASHBOOT_DIR)/$(DATAFLASHBOOT_BINARY)
+ $(call COPY_FILE, $(DATAFLASHBOOT_DIR)/$(DATAFLASHBOOT_BINARY), $(TARGET_ATMEL_COPYTO), $(BOARD_NAME)-$(DATAFLASHBOOT_BINARY))
+
+
+#############################################################
+#
+# Toplevel Makefile options
+#
+#############################################################
+ifeq ($(BR2_TARGET_DATAFLASHBOOT),y)
+TARGETS+=dataflash
+endif
--- /dev/null
+include boot/*/*.mk
\ No newline at end of file
--- /dev/null
+config BR2_TARGET_GRUB
+ bool "grub"
+ depends on BR2_i386 || BR2_x86_64
+ help
+ The GRand Unified Bootloader for x86 systems.
+
+config BR2_TARGET_GRUB_SPLASH
+ bool "Splashimage support"
+ depends on BR2_TARGET_GRUB
+ help
+ Add support for splashimage.
+
+ A splashimage is a 14-color indexed .xpm picture which
+ is displayed as background for the grub menu.
+
+config BR2_TARGET_GRUB_DISKLESS
+ bool "diskless support"
+ depends on BR2_TARGET_GRUB
+ help
+ enable diskless support
+
+config BR2_TARGET_GRUB_3c595
+ bool "3Com595 driver"
+ depends on BR2_TARGET_GRUB
+ help
+ enable 3Com595 driver
+
+config BR2_TARGET_GRUB_3c90x
+ bool "3Com90x driver"
+ depends on BR2_TARGET_GRUB
+ help
+ enable 3Com90x driver
+
+config BR2_TARGET_GRUB_davicom
+ bool "Davicom driver"
+ depends on BR2_TARGET_GRUB
+ help
+ enable Davicom driver
+
+config BR2_TARGET_GRUB_e1000
+ bool "Etherexpress Pro/1000 driver"
+ depends on BR2_TARGET_GRUB
+ help
+ enable Etherexpress Pro/1000 driver
+
+config BR2_TARGET_GRUB_eepro100
+ bool "Etherexpress Pro/100 driver"
+ depends on BR2_TARGET_GRUB
+ help
+ enable Etherexpress Pro/100 driver
+
+config BR2_TARGET_GRUB_epic100
+ bool "SMC 83c170 EPIC/100 driver"
+ depends on BR2_TARGET_GRUB
+ help
+ enable SMC 83c170 EPIC/100 driver
+
+config BR2_TARGET_GRUB_forcedeth
+ bool "Nvidia Geforce driver"
+ depends on BR2_TARGET_GRUB
+ help
+ enable Nvidia Geforce driver
+
+config BR2_TARGET_GRUB_natsemi
+ bool "NatSemi DP8381x driver"
+ depends on BR2_TARGET_GRUB
+ help
+ enable NatSemi DP8381x driver
+
+config BR2_TARGET_GRUB_ns83820
+ bool "NS83820 driver"
+ depends on BR2_TARGET_GRUB
+ help
+ enable NS83820 driver
+
+config BR2_TARGET_GRUB_ns8390
+ bool "NE2000 PCI driver"
+ depends on BR2_TARGET_GRUB
+ help
+ enable NE2000 PCI driver
+
+config BR2_TARGET_GRUB_pcnet32
+ bool "AMD Lance/PCI PCNet/32 driver"
+ depends on BR2_TARGET_GRUB
+ help
+ enable AMD Lance/PCI PCNet/32 driver
+
+config BR2_TARGET_GRUB_pnic
+ bool "Bochs Pseudo Nic driver"
+ depends on BR2_TARGET_GRUB
+ help
+ enable Bochs Pseudo Nic driver
+
+config BR2_TARGET_GRUB_rtl8139
+ bool "Realtek 8139 driver"
+ depends on BR2_TARGET_GRUB
+ help
+ enable Realtek 8139 driver
+
+config BR2_TARGET_GRUB_r8169
+ bool "Realtek 8169 driver"
+ depends on BR2_TARGET_GRUB
+ help
+ enable Realtek 8169 driver
+
+config BR2_TARGET_GRUB_sis900
+ bool "SIS 900 and SIS 7016 driver"
+ depends on BR2_TARGET_GRUB
+ help
+ enable SIS 900 and SIS 7016 driver
+
+config BR2_TARGET_GRUB_tg3
+ bool "Broadcom Tigon3 driver"
+ depends on BR2_TARGET_GRUB
+ help
+ enable Broadcom Tigon3 driver
+
+config BR2_TARGET_GRUB_tulip
+ bool "Tulip driver"
+ depends on BR2_TARGET_GRUB
+ help
+ enable Tulip driver
+
+config BR2_TARGET_GRUB_tlan
+ bool "TI ThunderLAN driver"
+ depends on BR2_TARGET_GRUB
+ help
+ enable TI ThunderLAN driver
+
+config BR2_TARGET_GRUB_undi
+ bool "PXE UNDI driver"
+ depends on BR2_TARGET_GRUB
+ help
+ enable PXE UNDI driver
+
+config BR2_TARGET_GRUB_via_rhine
+ bool "Rhine-I/II driver"
+ depends on BR2_TARGET_GRUB
+ help
+ enable Rhine-I/II driver
+
+config BR2_TARGET_GRUB_w89c840
+ bool "Winbond W89c840 driver"
+ depends on BR2_TARGET_GRUB
+ help
+ enable Winbond W89c840 driver
--- /dev/null
+diff -rup grub-0.97.oorig/aclocal.m4 grub-0.97/aclocal.m4
+--- grub-0.97.oorig/aclocal.m4 2005-05-08 04:41:18.000000000 +0200
++++ grub-0.97/aclocal.m4 2006-03-12 14:00:35.000000000 +0100
+@@ -1,7 +1,7 @@
+-# generated automatically by aclocal 1.9.4 -*- Autoconf -*-
++# generated automatically by aclocal 1.9.6 -*- Autoconf -*-
+
+-# Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004
+-# Free Software Foundation, Inc.
++# Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004,
++# 2005 Free Software Foundation, Inc.
+ # This file is free software; the Free Software Foundation
+ # gives unlimited permission to copy and/or distribute it,
+ # with or without modifications, as long as this notice is preserved.
+@@ -11,23 +11,11 @@
+ # even the implied warranty of MERCHANTABILITY or FITNESS FOR A
+ # PARTICULAR PURPOSE.
+
+-# -*- Autoconf -*-
+-# Copyright (C) 2002, 2003 Free Software Foundation, Inc.
+-# Generated from amversion.in; do not edit by hand.
+-
+-# This program is free software; you can redistribute it and/or modify
+-# it under the terms of the GNU General Public License as published by
+-# the Free Software Foundation; either version 2, or (at your option)
+-# any later version.
+-
+-# This program is distributed in the hope that it will be useful,
+-# but WITHOUT ANY WARRANTY; without even the implied warranty of
+-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+-# GNU General Public License for more details.
+-
+-# You should have received a copy of the GNU General Public License
+-# along with this program; if not, write to the Free Software
+-# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA
++# Copyright (C) 2002, 2003, 2005 Free Software Foundation, Inc.
++#
++# This file is free software; the Free Software Foundation
++# gives unlimited permission to copy and/or distribute it,
++# with or without modifications, as long as this notice is preserved.
+
+ # AM_AUTOMAKE_VERSION(VERSION)
+ # ----------------------------
+@@ -40,26 +28,15 @@ AC_DEFUN([AM_AUTOMAKE_VERSION], [am__api
+ # Call AM_AUTOMAKE_VERSION so it can be traced.
+ # This function is AC_REQUIREd by AC_INIT_AUTOMAKE.
+ AC_DEFUN([AM_SET_CURRENT_AUTOMAKE_VERSION],
+- [AM_AUTOMAKE_VERSION([1.9.4])])
+-
+-# AM_AUX_DIR_EXPAND
+-
+-# Copyright (C) 2001, 2003 Free Software Foundation, Inc.
++ [AM_AUTOMAKE_VERSION([1.9.6])])
+
+-# This program is free software; you can redistribute it and/or modify
+-# it under the terms of the GNU General Public License as published by
+-# the Free Software Foundation; either version 2, or (at your option)
+-# any later version.
++# AM_AUX_DIR_EXPAND -*- Autoconf -*-
+
+-# This program is distributed in the hope that it will be useful,
+-# but WITHOUT ANY WARRANTY; without even the implied warranty of
+-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+-# GNU General Public License for more details.
+-
+-# You should have received a copy of the GNU General Public License
+-# along with this program; if not, write to the Free Software
+-# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA
+-# 02111-1307, USA.
++# Copyright (C) 2001, 2003, 2005 Free Software Foundation, Inc.
++#
++# This file is free software; the Free Software Foundation
++# gives unlimited permission to copy and/or distribute it,
++# with or without modifications, as long as this notice is preserved.
+
+ # For projects using AC_CONFIG_AUX_DIR([foo]), Autoconf sets
+ # $ac_aux_dir to `$srcdir/foo'. In other projects, it is set to
+@@ -106,26 +83,16 @@ AC_PREREQ([2.50])dnl
+ am_aux_dir=`cd $ac_aux_dir && pwd`
+ ])
+
+-# AM_CONDITIONAL -*- Autoconf -*-
++# AM_CONDITIONAL -*- Autoconf -*-
+
+-# Copyright (C) 1997, 2000, 2001, 2003, 2004 Free Software Foundation, Inc.
+-
+-# This program is free software; you can redistribute it and/or modify
+-# it under the terms of the GNU General Public License as published by
+-# the Free Software Foundation; either version 2, or (at your option)
+-# any later version.
+-
+-# This program is distributed in the hope that it will be useful,
+-# but WITHOUT ANY WARRANTY; without even the implied warranty of
+-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+-# GNU General Public License for more details.
+-
+-# You should have received a copy of the GNU General Public License
+-# along with this program; if not, write to the Free Software
+-# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA
+-# 02111-1307, USA.
++# Copyright (C) 1997, 2000, 2001, 2003, 2004, 2005
++# Free Software Foundation, Inc.
++#
++# This file is free software; the Free Software Foundation
++# gives unlimited permission to copy and/or distribute it,
++# with or without modifications, as long as this notice is preserved.
+
+-# serial 6
++# serial 7
+
+ # AM_CONDITIONAL(NAME, SHELL-CONDITION)
+ # -------------------------------------
+@@ -149,26 +116,15 @@ AC_CONFIG_COMMANDS_PRE(
+ Usually this means the macro was only invoked conditionally.]])
+ fi])])
+
+-# serial 7 -*- Autoconf -*-
+
+-# Copyright (C) 1999, 2000, 2001, 2002, 2003, 2004
++# Copyright (C) 1999, 2000, 2001, 2002, 2003, 2004, 2005
+ # Free Software Foundation, Inc.
++#
++# This file is free software; the Free Software Foundation
++# gives unlimited permission to copy and/or distribute it,
++# with or without modifications, as long as this notice is preserved.
+
+-# This program is free software; you can redistribute it and/or modify
+-# it under the terms of the GNU General Public License as published by
+-# the Free Software Foundation; either version 2, or (at your option)
+-# any later version.
+-
+-# This program is distributed in the hope that it will be useful,
+-# but WITHOUT ANY WARRANTY; without even the implied warranty of
+-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+-# GNU General Public License for more details.
+-
+-# You should have received a copy of the GNU General Public License
+-# along with this program; if not, write to the Free Software
+-# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA
+-# 02111-1307, USA.
+-
++# serial 8
+
+ # There are a few dirty hacks below to avoid letting `AC_PROG_CC' be
+ # written in clear, in which case automake, when reading aclocal.m4,
+@@ -177,7 +133,6 @@ fi])])
+ # CC etc. in the Makefile, will ask for an AC_PROG_CC use...
+
+
+-
+ # _AM_DEPENDENCIES(NAME)
+ # ----------------------
+ # See how the compiler implements dependency checking.
+@@ -317,27 +272,16 @@ AM_CONDITIONAL([AMDEP], [test "x$enable_
+ AC_SUBST([AMDEPBACKSLASH])
+ ])
+
+-# Generate code to set up dependency tracking. -*- Autoconf -*-
+-
+-# Copyright (C) 1999, 2000, 2001, 2002, 2003, 2004
+-# Free Software Foundation, Inc.
+-
+-# This program is free software; you can redistribute it and/or modify
+-# it under the terms of the GNU General Public License as published by
+-# the Free Software Foundation; either version 2, or (at your option)
+-# any later version.
++# Generate code to set up dependency tracking. -*- Autoconf -*-
+
+-# This program is distributed in the hope that it will be useful,
+-# but WITHOUT ANY WARRANTY; without even the implied warranty of
+-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+-# GNU General Public License for more details.
+-
+-# You should have received a copy of the GNU General Public License
+-# along with this program; if not, write to the Free Software
+-# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA
+-# 02111-1307, USA.
++# Copyright (C) 1999, 2000, 2001, 2002, 2003, 2004, 2005
++# Free Software Foundation, Inc.
++#
++# This file is free software; the Free Software Foundation
++# gives unlimited permission to copy and/or distribute it,
++# with or without modifications, as long as this notice is preserved.
+
+-#serial 2
++#serial 3
+
+ # _AM_OUTPUT_DEPENDENCY_COMMANDS
+ # ------------------------------
+@@ -396,30 +340,19 @@ AC_DEFUN([AM_OUTPUT_DEPENDENCY_COMMANDS]
+ [AMDEP_TRUE="$AMDEP_TRUE" ac_aux_dir="$ac_aux_dir"])
+ ])
+
+-# Do all the work for Automake. -*- Autoconf -*-
++# Do all the work for Automake. -*- Autoconf -*-
+
+-# This macro actually does too much some checks are only needed if
+-# your package does certain things. But this isn't really a big deal.
+-
+-# Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004
++# Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005
+ # Free Software Foundation, Inc.
++#
++# This file is free software; the Free Software Foundation
++# gives unlimited permission to copy and/or distribute it,
++# with or without modifications, as long as this notice is preserved.
+
+-# This program is free software; you can redistribute it and/or modify
+-# it under the terms of the GNU General Public License as published by
+-# the Free Software Foundation; either version 2, or (at your option)
+-# any later version.
+-
+-# This program is distributed in the hope that it will be useful,
+-# but WITHOUT ANY WARRANTY; without even the implied warranty of
+-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+-# GNU General Public License for more details.
+-
+-# You should have received a copy of the GNU General Public License
+-# along with this program; if not, write to the Free Software
+-# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA
+-# 02111-1307, USA.
++# serial 12
+
+-# serial 11
++# This macro actually does too much. Some checks are only needed if
++# your package does certain things. But this isn't really a big deal.
+
+ # AM_INIT_AUTOMAKE(PACKAGE, VERSION, [NO-DEFINE])
+ # AM_INIT_AUTOMAKE([OPTIONS])
+@@ -521,51 +454,27 @@ for _am_header in $config_headers :; do
+ done
+ echo "timestamp for $1" >`AS_DIRNAME([$1])`/stamp-h[]$_am_stamp_count])
+
++# Copyright (C) 2001, 2003, 2005 Free Software Foundation, Inc.
++#
++# This file is free software; the Free Software Foundation
++# gives unlimited permission to copy and/or distribute it,
++# with or without modifications, as long as this notice is preserved.
++
+ # AM_PROG_INSTALL_SH
+ # ------------------
+ # Define $install_sh.
+-
+-# Copyright (C) 2001, 2003 Free Software Foundation, Inc.
+-
+-# This program is free software; you can redistribute it and/or modify
+-# it under the terms of the GNU General Public License as published by
+-# the Free Software Foundation; either version 2, or (at your option)
+-# any later version.
+-
+-# This program is distributed in the hope that it will be useful,
+-# but WITHOUT ANY WARRANTY; without even the implied warranty of
+-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+-# GNU General Public License for more details.
+-
+-# You should have received a copy of the GNU General Public License
+-# along with this program; if not, write to the Free Software
+-# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA
+-# 02111-1307, USA.
+-
+ AC_DEFUN([AM_PROG_INSTALL_SH],
+ [AC_REQUIRE([AM_AUX_DIR_EXPAND])dnl
+ install_sh=${install_sh-"$am_aux_dir/install-sh"}
+ AC_SUBST(install_sh)])
+
+-# -*- Autoconf -*-
+-# Copyright (C) 2003 Free Software Foundation, Inc.
+-
+-# This program is free software; you can redistribute it and/or modify
+-# it under the terms of the GNU General Public License as published by
+-# the Free Software Foundation; either version 2, or (at your option)
+-# any later version.
+-
+-# This program is distributed in the hope that it will be useful,
+-# but WITHOUT ANY WARRANTY; without even the implied warranty of
+-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+-# GNU General Public License for more details.
+-
+-# You should have received a copy of the GNU General Public License
+-# along with this program; if not, write to the Free Software
+-# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA
+-# 02111-1307, USA.
++# Copyright (C) 2003, 2005 Free Software Foundation, Inc.
++#
++# This file is free software; the Free Software Foundation
++# gives unlimited permission to copy and/or distribute it,
++# with or without modifications, as long as this notice is preserved.
+
+-# serial 1
++# serial 2
+
+ # Check whether the underlying file-system supports filenames
+ # with a leading dot. For instance MS-DOS doesn't.
+@@ -580,28 +489,17 @@ fi
+ rmdir .tst 2>/dev/null
+ AC_SUBST([am__leading_dot])])
+
+-# Add --enable-maintainer-mode option to configure.
++# Add --enable-maintainer-mode option to configure. -*- Autoconf -*-
+ # From Jim Meyering
+
+-# Copyright (C) 1996, 1998, 2000, 2001, 2002, 2003, 2004
++# Copyright (C) 1996, 1998, 2000, 2001, 2002, 2003, 2004, 2005
+ # Free Software Foundation, Inc.
++#
++# This file is free software; the Free Software Foundation
++# gives unlimited permission to copy and/or distribute it,
++# with or without modifications, as long as this notice is preserved.
+
+-# This program is free software; you can redistribute it and/or modify
+-# it under the terms of the GNU General Public License as published by
+-# the Free Software Foundation; either version 2, or (at your option)
+-# any later version.
+-
+-# This program is distributed in the hope that it will be useful,
+-# but WITHOUT ANY WARRANTY; without even the implied warranty of
+-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+-# GNU General Public License for more details.
+-
+-# You should have received a copy of the GNU General Public License
+-# along with this program; if not, write to the Free Software
+-# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA
+-# 02111-1307, USA.
+-
+-# serial 3
++# serial 4
+
+ AC_DEFUN([AM_MAINTAINER_MODE],
+ [AC_MSG_CHECKING([whether to enable maintainer-specific portions of Makefiles])
+@@ -620,26 +518,15 @@ AC_DEFUN([AM_MAINTAINER_MODE],
+
+ AU_DEFUN([jm_MAINTAINER_MODE], [AM_MAINTAINER_MODE])
+
+-# Check to see how 'make' treats includes. -*- Autoconf -*-
+-
+-# Copyright (C) 2001, 2002, 2003 Free Software Foundation, Inc.
++# Check to see how 'make' treats includes. -*- Autoconf -*-
+
+-# This program is free software; you can redistribute it and/or modify
+-# it under the terms of the GNU General Public License as published by
+-# the Free Software Foundation; either version 2, or (at your option)
+-# any later version.
+-
+-# This program is distributed in the hope that it will be useful,
+-# but WITHOUT ANY WARRANTY; without even the implied warranty of
+-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+-# GNU General Public License for more details.
+-
+-# You should have received a copy of the GNU General Public License
+-# along with this program; if not, write to the Free Software
+-# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA
+-# 02111-1307, USA.
++# Copyright (C) 2001, 2002, 2003, 2005 Free Software Foundation, Inc.
++#
++# This file is free software; the Free Software Foundation
++# gives unlimited permission to copy and/or distribute it,
++# with or without modifications, as long as this notice is preserved.
+
+-# serial 2
++# serial 3
+
+ # AM_MAKE_INCLUDE()
+ # -----------------
+@@ -683,27 +570,16 @@ AC_MSG_RESULT([$_am_result])
+ rm -f confinc confmf
+ ])
+
+-# -*- Autoconf -*-
+-
+-
+-# Copyright (C) 1997, 1999, 2000, 2001, 2003 Free Software Foundation, Inc.
+-
+-# This program is free software; you can redistribute it and/or modify
+-# it under the terms of the GNU General Public License as published by
+-# the Free Software Foundation; either version 2, or (at your option)
+-# any later version.
++# Fake the existence of programs that GNU maintainers use. -*- Autoconf -*-
+
+-# This program is distributed in the hope that it will be useful,
+-# but WITHOUT ANY WARRANTY; without even the implied warranty of
+-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+-# GNU General Public License for more details.
+-
+-# You should have received a copy of the GNU General Public License
+-# along with this program; if not, write to the Free Software
+-# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA
+-# 02111-1307, USA.
++# Copyright (C) 1997, 1999, 2000, 2001, 2003, 2005
++# Free Software Foundation, Inc.
++#
++# This file is free software; the Free Software Foundation
++# gives unlimited permission to copy and/or distribute it,
++# with or without modifications, as long as this notice is preserved.
+
+-# serial 3
++# serial 4
+
+ # AM_MISSING_PROG(NAME, PROGRAM)
+ # ------------------------------
+@@ -729,27 +605,16 @@ else
+ fi
+ ])
+
++# Copyright (C) 2003, 2004, 2005 Free Software Foundation, Inc.
++#
++# This file is free software; the Free Software Foundation
++# gives unlimited permission to copy and/or distribute it,
++# with or without modifications, as long as this notice is preserved.
++
+ # AM_PROG_MKDIR_P
+ # ---------------
+ # Check whether `mkdir -p' is supported, fallback to mkinstalldirs otherwise.
+-
+-# Copyright (C) 2003, 2004 Free Software Foundation, Inc.
+-
+-# This program is free software; you can redistribute it and/or modify
+-# it under the terms of the GNU General Public License as published by
+-# the Free Software Foundation; either version 2, or (at your option)
+-# any later version.
+-
+-# This program is distributed in the hope that it will be useful,
+-# but WITHOUT ANY WARRANTY; without even the implied warranty of
+-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+-# GNU General Public License for more details.
+-
+-# You should have received a copy of the GNU General Public License
+-# along with this program; if not, write to the Free Software
+-# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA
+-# 02111-1307, USA.
+-
++#
+ # Automake 1.8 used `mkdir -m 0755 -p --' to ensure that directories
+ # created by `make install' are always world readable, even if the
+ # installer happens to have an overly restrictive umask (e.g. 077).
+@@ -803,26 +668,15 @@ else
+ fi
+ AC_SUBST([mkdir_p])])
+
+-# Helper functions for option handling. -*- Autoconf -*-
++# Helper functions for option handling. -*- Autoconf -*-
+
+-# Copyright (C) 2001, 2002, 2003 Free Software Foundation, Inc.
+-
+-# This program is free software; you can redistribute it and/or modify
+-# it under the terms of the GNU General Public License as published by
+-# the Free Software Foundation; either version 2, or (at your option)
+-# any later version.
+-
+-# This program is distributed in the hope that it will be useful,
+-# but WITHOUT ANY WARRANTY; without even the implied warranty of
+-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+-# GNU General Public License for more details.
+-
+-# You should have received a copy of the GNU General Public License
+-# along with this program; if not, write to the Free Software
+-# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA
+-# 02111-1307, USA.
++# Copyright (C) 2001, 2002, 2003, 2005 Free Software Foundation, Inc.
++#
++# This file is free software; the Free Software Foundation
++# gives unlimited permission to copy and/or distribute it,
++# with or without modifications, as long as this notice is preserved.
+
+-# serial 2
++# serial 3
+
+ # _AM_MANGLE_OPTION(NAME)
+ # -----------------------
+@@ -847,28 +701,16 @@ AC_DEFUN([_AM_SET_OPTIONS],
+ AC_DEFUN([_AM_IF_OPTION],
+ [m4_ifset(_AM_MANGLE_OPTION([$1]), [$2], [$3])])
+
+-#
+-# Check to make sure that the build environment is sane.
+-#
+-
+-# Copyright (C) 1996, 1997, 2000, 2001, 2003 Free Software Foundation, Inc.
+-
+-# This program is free software; you can redistribute it and/or modify
+-# it under the terms of the GNU General Public License as published by
+-# the Free Software Foundation; either version 2, or (at your option)
+-# any later version.
++# Check to make sure that the build environment is sane. -*- Autoconf -*-
+
+-# This program is distributed in the hope that it will be useful,
+-# but WITHOUT ANY WARRANTY; without even the implied warranty of
+-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+-# GNU General Public License for more details.
+-
+-# You should have received a copy of the GNU General Public License
+-# along with this program; if not, write to the Free Software
+-# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA
+-# 02111-1307, USA.
++# Copyright (C) 1996, 1997, 2000, 2001, 2003, 2005
++# Free Software Foundation, Inc.
++#
++# This file is free software; the Free Software Foundation
++# gives unlimited permission to copy and/or distribute it,
++# with or without modifications, as long as this notice is preserved.
+
+-# serial 3
++# serial 4
+
+ # AM_SANITY_CHECK
+ # ---------------
+@@ -911,25 +753,14 @@ Check your system clock])
+ fi
+ AC_MSG_RESULT(yes)])
+
+-# AM_PROG_INSTALL_STRIP
+-
+-# Copyright (C) 2001, 2003 Free Software Foundation, Inc.
+-
+-# This program is free software; you can redistribute it and/or modify
+-# it under the terms of the GNU General Public License as published by
+-# the Free Software Foundation; either version 2, or (at your option)
+-# any later version.
+-
+-# This program is distributed in the hope that it will be useful,
+-# but WITHOUT ANY WARRANTY; without even the implied warranty of
+-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+-# GNU General Public License for more details.
+-
+-# You should have received a copy of the GNU General Public License
+-# along with this program; if not, write to the Free Software
+-# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA
+-# 02111-1307, USA.
++# Copyright (C) 2001, 2003, 2005 Free Software Foundation, Inc.
++#
++# This file is free software; the Free Software Foundation
++# gives unlimited permission to copy and/or distribute it,
++# with or without modifications, as long as this notice is preserved.
+
++# AM_PROG_INSTALL_STRIP
++# ---------------------
+ # One issue with vendor `install' (even GNU) is that you can't
+ # specify the program used to strip binaries. This is especially
+ # annoying in cross-compiling environments, where the build's strip
+@@ -952,25 +783,13 @@ AC_SUBST([INSTALL_STRIP_PROGRAM])])
+
+ # Check how to create a tarball. -*- Autoconf -*-
+
+-# Copyright (C) 2004 Free Software Foundation, Inc.
+-
+-# This program is free software; you can redistribute it and/or modify
+-# it under the terms of the GNU General Public License as published by
+-# the Free Software Foundation; either version 2, or (at your option)
+-# any later version.
+-
+-# This program is distributed in the hope that it will be useful,
+-# but WITHOUT ANY WARRANTY; without even the implied warranty of
+-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+-# GNU General Public License for more details.
+-
+-# You should have received a copy of the GNU General Public License
+-# along with this program; if not, write to the Free Software
+-# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA
+-# 02111-1307, USA.
+-
+-# serial 1
++# Copyright (C) 2004, 2005 Free Software Foundation, Inc.
++#
++# This file is free software; the Free Software Foundation
++# gives unlimited permission to copy and/or distribute it,
++# with or without modifications, as long as this notice is preserved.
+
++# serial 2
+
+ # _AM_PROG_TAR(FORMAT)
+ # --------------------
+Only in grub-0.97/: autom4te.cache
+diff -rup grub-0.97.oorig/configure grub-0.97/configure
+--- grub-0.97.oorig/configure 2005-05-08 04:48:12.000000000 +0200
++++ grub-0.97/configure 2006-03-12 14:00:38.000000000 +0100
+@@ -311,7 +311,7 @@ ac_includes_default="\
+ # include <unistd.h>
+ #endif"
+
+-ac_subst_vars='SHELL PATH_SEPARATOR PACKAGE_NAME PACKAGE_TARNAME PACKAGE_VERSION PACKAGE_STRING PACKAGE_BUGREPORT exec_prefix prefix program_transform_name bindir sbindir libexecdir datadir sysconfdir sharedstatedir localstatedir libdir includedir oldincludedir infodir mandir build_alias host_alias target_alias DEFS ECHO_C ECHO_N ECHO_T LIBS INSTALL_PROGRAM INSTALL_SCRIPT INSTALL_DATA CYGPATH_W PACKAGE VERSION ACLOCAL AUTOCONF AUTOMAKE AUTOHEADER MAKEINFO install_sh STRIP ac_ct_STRIP INSTALL_STRIP_PROGRAM mkdir_p AWK SET_MAKE am__leading_dot AMTAR am__tar am__untar build build_cpu build_vendor build_os host host_cpu host_vendor host_os MAINTAINER_MODE_TRUE MAINTAINER_MODE_FALSE MAINT PERL CC ac_ct_CC CFLAGS LDFLAGS CPPFLAGS EXEEXT OBJEXT DEPDIR am__include am__quote AMDEP_TRUE AMDEP_FALSE AMDEPBACKSLASH CCDEPMODE am__fastdepCC_TRUE am__fastdepCC_FALSE CCAS RANLIB ac_ct_RANLIB STAGE1_CFLAGS STAGE2_CFLAGS GRUB_CFLAGS OBJCOPY ac_ct_OBJCOPY GRUB_LIBS CPP EGREP NETBOOT_SUPPORT_TRUE NETBOOT_SUPPORT_FALSE DISKLESS_SUPPORT_TRUE DISKLESS_SUPPORT_FALSE HERCULES_SUPPORT_TRUE HERCULES_SUPPORT_FALSE SERIAL_SUPPORT_TRUE SERIAL_SUPPORT_FALSE SERIAL_SPEED_SIMULATION_TRUE SERIAL_SPEED_SIMULATION_FALSE BUILD_EXAMPLE_KERNEL_TRUE BUILD_EXAMPLE_KERNEL_FALSE FSYS_CFLAGS NET_CFLAGS NET_EXTRAFLAGS NETBOOT_DRIVERS CCASFLAGS LIBOBJS LTLIBOBJS'
++ac_subst_vars='SHELL PATH_SEPARATOR PACKAGE_NAME PACKAGE_TARNAME PACKAGE_VERSION PACKAGE_STRING PACKAGE_BUGREPORT exec_prefix prefix program_transform_name bindir sbindir libexecdir datadir sysconfdir sharedstatedir localstatedir libdir includedir oldincludedir infodir mandir build_alias host_alias target_alias DEFS ECHO_C ECHO_N ECHO_T LIBS INSTALL_PROGRAM INSTALL_SCRIPT INSTALL_DATA CYGPATH_W PACKAGE VERSION ACLOCAL AUTOCONF AUTOMAKE AUTOHEADER MAKEINFO install_sh STRIP ac_ct_STRIP INSTALL_STRIP_PROGRAM mkdir_p AWK SET_MAKE am__leading_dot AMTAR am__tar am__untar build build_cpu build_vendor build_os host host_cpu host_vendor host_os MAINTAINER_MODE_TRUE MAINTAINER_MODE_FALSE MAINT PERL CC ac_ct_CC CFLAGS LDFLAGS CPPFLAGS EXEEXT OBJEXT DEPDIR am__include am__quote AMDEP_TRUE AMDEP_FALSE AMDEPBACKSLASH CCDEPMODE am__fastdepCC_TRUE am__fastdepCC_FALSE CCAS RANLIB ac_ct_RANLIB STAGE1_CFLAGS STAGE2_CFLAGS GRUB_CFLAGS OBJCOPY ac_ct_OBJCOPY GRUB_LIBS CPP EGREP NETBOOT_SUPPORT_TRUE NETBOOT_SUPPORT_FALSE DISKLESS_SUPPORT_TRUE DISKLESS_SUPPORT_FALSE GRAPHICS_SUPPORT_TRUE GRAPHICS_SUPPORT_FALSE HERCULES_SUPPORT_TRUE HERCULES_SUPPORT_FALSE SERIAL_SUPPORT_TRUE SERIAL_SUPPORT_FALSE SERIAL_SPEED_SIMULATION_TRUE SERIAL_SPEED_SIMULATION_FALSE BUILD_EXAMPLE_KERNEL_TRUE BUILD_EXAMPLE_KERNEL_FALSE FSYS_CFLAGS NET_CFLAGS NET_EXTRAFLAGS NETBOOT_DRIVERS CCASFLAGS LIBOBJS LTLIBOBJS'
+ ac_subst_files=''
+
+ # Initialize some variables set by options.
+@@ -914,6 +914,7 @@ Optional Features:
+ set the default memory location for WD/SMC
+ --enable-cs-scan=LIST probe for CS89x0 base address using LIST
+ --enable-diskless enable diskless support
++ --disable-graphics disable graphics terminal support
+ --disable-hercules disable hercules terminal support
+ --disable-serial disable serial terminal support
+ --enable-serial-speed-simulation
+@@ -1032,7 +1033,7 @@ esac
+ else
+ echo "$as_me: WARNING: no configuration information is in $ac_dir" >&2
+ fi
+- cd $ac_popdir
++ cd "$ac_popdir"
+ done
+ fi
+
+@@ -2631,8 +2632,7 @@ if { (eval echo "$as_me:$LINENO: \"$ac_c
+ cat conftest.err >&5
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); } &&
+- { ac_try='test -z "$ac_c_werror_flag"
+- || test ! -s conftest.err'
++ { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err'
+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+@@ -2690,8 +2690,7 @@ if { (eval echo "$as_me:$LINENO: \"$ac_c
+ cat conftest.err >&5
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); } &&
+- { ac_try='test -z "$ac_c_werror_flag"
+- || test ! -s conftest.err'
++ { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err'
+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+@@ -2807,8 +2806,7 @@ if { (eval echo "$as_me:$LINENO: \"$ac_c
+ cat conftest.err >&5
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); } &&
+- { ac_try='test -z "$ac_c_werror_flag"
+- || test ! -s conftest.err'
++ { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err'
+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+@@ -2862,8 +2860,7 @@ if { (eval echo "$as_me:$LINENO: \"$ac_c
+ cat conftest.err >&5
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); } &&
+- { ac_try='test -z "$ac_c_werror_flag"
+- || test ! -s conftest.err'
++ { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err'
+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+@@ -2908,8 +2905,7 @@ if { (eval echo "$as_me:$LINENO: \"$ac_c
+ cat conftest.err >&5
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); } &&
+- { ac_try='test -z "$ac_c_werror_flag"
+- || test ! -s conftest.err'
++ { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err'
+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+@@ -2953,8 +2949,7 @@ if { (eval echo "$as_me:$LINENO: \"$ac_c
+ cat conftest.err >&5
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); } &&
+- { ac_try='test -z "$ac_c_werror_flag"
+- || test ! -s conftest.err'
++ { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err'
+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+@@ -3458,8 +3453,7 @@ if { (eval echo "$as_me:$LINENO: \"$ac_c
+ cat conftest.err >&5
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); } &&
+- { ac_try='test -z "$ac_c_werror_flag"
+- || test ! -s conftest.err'
++ { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err'
+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+@@ -3523,8 +3517,7 @@ if { (eval echo "$as_me:$LINENO: \"$ac_c
+ cat conftest.err >&5
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); } &&
+- { ac_try='test -z "$ac_c_werror_flag"
+- || test ! -s conftest.err'
++ { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err'
+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+@@ -3595,8 +3588,7 @@ if { (eval echo "$as_me:$LINENO: \"$ac_c
+ cat conftest.err >&5
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); } &&
+- { ac_try='test -z "$ac_c_werror_flag"
+- || test ! -s conftest.err'
++ { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err'
+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+@@ -3656,8 +3648,7 @@ if { (eval echo "$as_me:$LINENO: \"$ac_c
+ cat conftest.err >&5
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); } &&
+- { ac_try='test -z "$ac_c_werror_flag"
+- || test ! -s conftest.err'
++ { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err'
+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+@@ -4095,8 +4086,7 @@ if { (eval echo "$as_me:$LINENO: \"$ac_l
+ cat conftest.err >&5
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); } &&
+- { ac_try='test -z "$ac_c_werror_flag"
+- || test ! -s conftest.err'
++ { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err'
+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+@@ -4161,8 +4151,7 @@ if { (eval echo "$as_me:$LINENO: \"$ac_l
+ cat conftest.err >&5
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); } &&
+- { ac_try='test -z "$ac_c_werror_flag"
+- || test ! -s conftest.err'
++ { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err'
+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+@@ -4234,8 +4223,7 @@ if { (eval echo "$as_me:$LINENO: \"$ac_l
+ cat conftest.err >&5
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); } &&
+- { ac_try='test -z "$ac_c_werror_flag"
+- || test ! -s conftest.err'
++ { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err'
+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+@@ -4300,8 +4288,7 @@ if { (eval echo "$as_me:$LINENO: \"$ac_l
+ cat conftest.err >&5
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); } &&
+- { ac_try='test -z "$ac_c_werror_flag"
+- || test ! -s conftest.err'
++ { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err'
+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+@@ -4366,8 +4353,7 @@ if { (eval echo "$as_me:$LINENO: \"$ac_l
+ cat conftest.err >&5
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); } &&
+- { ac_try='test -z "$ac_c_werror_flag"
+- || test ! -s conftest.err'
++ { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err'
+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+@@ -4440,8 +4426,7 @@ if { (eval echo "$as_me:$LINENO: \"$ac_l
+ cat conftest.err >&5
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); } &&
+- { ac_try='test -z "$ac_c_werror_flag"
+- || test ! -s conftest.err'
++ { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err'
+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+@@ -4506,8 +4491,7 @@ if { (eval echo "$as_me:$LINENO: \"$ac_l
+ cat conftest.err >&5
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); } &&
+- { ac_try='test -z "$ac_c_werror_flag"
+- || test ! -s conftest.err'
++ { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err'
+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+@@ -4597,8 +4581,7 @@ if { (eval echo "$as_me:$LINENO: \"$ac_l
+ cat conftest.err >&5
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); } &&
+- { ac_try='test -z "$ac_c_werror_flag"
+- || test ! -s conftest.err'
++ { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err'
+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+@@ -4673,8 +4656,7 @@ if { (eval echo "$as_me:$LINENO: \"$ac_l
+ cat conftest.err >&5
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); } &&
+- { ac_try='test -z "$ac_c_werror_flag"
+- || test ! -s conftest.err'
++ { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err'
+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+@@ -4745,8 +4727,7 @@ if { (eval echo "$as_me:$LINENO: \"$ac_l
+ cat conftest.err >&5
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); } &&
+- { ac_try='test -z "$ac_c_werror_flag"
+- || test ! -s conftest.err'
++ { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err'
+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+@@ -5070,8 +5051,7 @@ if { (eval echo "$as_me:$LINENO: \"$ac_c
+ cat conftest.err >&5
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); } &&
+- { ac_try='test -z "$ac_c_werror_flag"
+- || test ! -s conftest.err'
++ { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err'
+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+@@ -5241,8 +5221,7 @@ if { (eval echo "$as_me:$LINENO: \"$ac_c
+ cat conftest.err >&5
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); } &&
+- { ac_try='test -z "$ac_c_werror_flag"
+- || test ! -s conftest.err'
++ { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err'
+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+@@ -5313,8 +5292,7 @@ if { (eval echo "$as_me:$LINENO: \"$ac_c
+ cat conftest.err >&5
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); } &&
+- { ac_try='test -z "$ac_c_werror_flag"
+- || test ! -s conftest.err'
++ { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err'
+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+@@ -5966,6 +5944,22 @@ else
+ fi
+
+
++# Check whether --enable-graphics or --disable-graphics was given.
++if test "${enable_graphics+set}" = set; then
++ enableval="$enable_graphics"
++
++fi;
++
++
++if test "x$enable_graphics" != xno; then
++ GRAPHICS_SUPPORT_TRUE=
++ GRAPHICS_SUPPORT_FALSE='#'
++else
++ GRAPHICS_SUPPORT_TRUE='#'
++ GRAPHICS_SUPPORT_FALSE=
++fi
++
++
+ # Check whether --enable-hercules or --disable-hercules was given.
+ if test "${enable_hercules+set}" = set; then
+ enableval="$enable_hercules"
+@@ -6270,6 +6264,13 @@ echo "$as_me: error: conditional \"DISKL
+ Usually this means the macro was only invoked conditionally." >&2;}
+ { (exit 1); exit 1; }; }
+ fi
++if test -z "${GRAPHICS_SUPPORT_TRUE}" && test -z "${GRAPHICS_SUPPORT_FALSE}"; then
++ { { echo "$as_me:$LINENO: error: conditional \"GRAPHICS_SUPPORT\" was never defined.
++Usually this means the macro was only invoked conditionally." >&5
++echo "$as_me: error: conditional \"GRAPHICS_SUPPORT\" was never defined.
++Usually this means the macro was only invoked conditionally." >&2;}
++ { (exit 1); exit 1; }; }
++fi
+ if test -z "${HERCULES_SUPPORT_TRUE}" && test -z "${HERCULES_SUPPORT_FALSE}"; then
+ { { echo "$as_me:$LINENO: error: conditional \"HERCULES_SUPPORT\" was never defined.
+ Usually this means the macro was only invoked conditionally." >&5
+@@ -6907,6 +6908,8 @@ s,@NETBOOT_SUPPORT_TRUE@,$NETBOOT_SUPPOR
+ s,@NETBOOT_SUPPORT_FALSE@,$NETBOOT_SUPPORT_FALSE,;t t
+ s,@DISKLESS_SUPPORT_TRUE@,$DISKLESS_SUPPORT_TRUE,;t t
+ s,@DISKLESS_SUPPORT_FALSE@,$DISKLESS_SUPPORT_FALSE,;t t
++s,@GRAPHICS_SUPPORT_TRUE@,$GRAPHICS_SUPPORT_TRUE,;t t
++s,@GRAPHICS_SUPPORT_FALSE@,$GRAPHICS_SUPPORT_FALSE,;t t
+ s,@HERCULES_SUPPORT_TRUE@,$HERCULES_SUPPORT_TRUE,;t t
+ s,@HERCULES_SUPPORT_FALSE@,$HERCULES_SUPPORT_FALSE,;t t
+ s,@SERIAL_SUPPORT_TRUE@,$SERIAL_SUPPORT_TRUE,;t t
+@@ -7088,11 +7091,6 @@ esac
+ *) ac_INSTALL=$ac_top_builddir$INSTALL ;;
+ esac
+
+- if test x"$ac_file" != x-; then
+- { echo "$as_me:$LINENO: creating $ac_file" >&5
+-echo "$as_me: creating $ac_file" >&6;}
+- rm -f "$ac_file"
+- fi
+ # Let's still pretend it is `configure' which instantiates (i.e., don't
+ # use $as_me), people would be surprised to read:
+ # /* config.h. Generated by config.status. */
+@@ -7131,6 +7129,12 @@ echo "$as_me: error: cannot find input f
+ fi;;
+ esac
+ done` || { (exit 1); exit 1; }
++
++ if test x"$ac_file" != x-; then
++ { echo "$as_me:$LINENO: creating $ac_file" >&5
++echo "$as_me: creating $ac_file" >&6;}
++ rm -f "$ac_file"
++ fi
+ _ACEOF
+ cat >>$CONFIG_STATUS <<_ACEOF
+ sed "$ac_vpsub
+diff -rup grub-0.97.oorig/docs/Makefile.in grub-0.97/docs/Makefile.in
+--- grub-0.97.oorig/docs/Makefile.in 2005-05-08 04:42:34.000000000 +0200
++++ grub-0.97/docs/Makefile.in 2006-03-12 14:00:43.000000000 +0100
+@@ -1,8 +1,8 @@
+-# Makefile.in generated by automake 1.9.4 from Makefile.am.
++# Makefile.in generated by automake 1.9.6 from Makefile.am.
+ # @configure_input@
+
+ # Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002,
+-# 2003, 2004 Free Software Foundation, Inc.
++# 2003, 2004, 2005 Free Software Foundation, Inc.
+ # This Makefile.in is free software; the Free Software Foundation
+ # gives unlimited permission to copy and/or distribute it,
+ # with or without modifications, as long as this notice is preserved.
+@@ -15,8 +15,6 @@
+ @SET_MAKE@
+
+
+-SOURCES = $(kernel_SOURCES)
+-
+ srcdir = @srcdir@
+ top_srcdir = @top_srcdir@
+ VPATH = @srcdir@
+@@ -120,6 +118,8 @@ ECHO_T = @ECHO_T@
+ EGREP = @EGREP@
+ EXEEXT = @EXEEXT@
+ FSYS_CFLAGS = @FSYS_CFLAGS@
++GRAPHICS_SUPPORT_FALSE = @GRAPHICS_SUPPORT_FALSE@
++GRAPHICS_SUPPORT_TRUE = @GRAPHICS_SUPPORT_TRUE@
+ GRUB_CFLAGS = @GRUB_CFLAGS@
+ GRUB_LIBS = @GRUB_LIBS@
+ HERCULES_SUPPORT_FALSE = @HERCULES_SUPPORT_FALSE@
+@@ -304,9 +304,11 @@ kernel-kernel.obj: kernel.c
+ restore=: && backupdir="$(am__leading_dot)am$$$$" && \
+ am__cwd=`pwd` && cd $(srcdir) && \
+ rm -rf $$backupdir && mkdir $$backupdir && \
+- for f in $@ $@-[0-9] $@-[0-9][0-9] $(@:.info=).i[0-9] $(@:.info=).i[0-9][0-9]; do \
+- if test -f $$f; then mv $$f $$backupdir; restore=mv; else :; fi; \
+- done; \
++ if ($(MAKEINFO) --version) >/dev/null 2>&1; then \
++ for f in $@ $@-[0-9] $@-[0-9][0-9] $(@:.info=).i[0-9] $(@:.info=).i[0-9][0-9]; do \
++ if test -f $$f; then mv $$f $$backupdir; restore=mv; else :; fi; \
++ done; \
++ else :; fi && \
+ cd "$$am__cwd"; \
+ if $(MAKEINFO) $(AM_MAKEINFOFLAGS) $(MAKEINFOFLAGS) -I $(srcdir) \
+ -o $@ $<; \
+@@ -371,10 +373,11 @@ multiboot.dvi: multiboot.texi $(multiboo
+ multiboot.pdf: multiboot.texi $(multiboot_TEXINFOS)
+ multiboot.html: multiboot.texi $(multiboot_TEXINFOS)
+ .dvi.ps:
++ TEXINPUTS="$(am__TEXINFO_TEX_DIR)$(PATH_SEPARATOR)$$TEXINPUTS" \
+ $(DVIPS) -o $@ $<
+
+ uninstall-info-am:
+- $(PRE_UNINSTALL)
++ @$(PRE_UNINSTALL)
+ @if (install-info --version && \
+ install-info --version 2>&1 | sed 1q | grep -i -v debian) >/dev/null 2>&1; then \
+ list='$(INFO_DEPS)'; \
+@@ -390,7 +393,7 @@ uninstall-info-am:
+ relfile=`echo "$$file" | sed 's|^.*/||'`; \
+ relfile_i=`echo "$$relfile" | sed 's|\.info$$||;s|$$|.i|'`; \
+ (if cd "$(DESTDIR)$(infodir)"; then \
+- echo " rm -f $$relfile $$relfile-[0-9] $$relfile-[0-9][0-9] $$relfile_i[0-9] $$relfile_i[0-9][0-9])"; \
++ echo " cd '$(DESTDIR)$(infodir)' && rm -f $$relfile $$relfile-[0-9] $$relfile-[0-9][0-9] $$relfile_i[0-9] $$relfile_i[0-9][0-9]"; \
+ rm -f $$relfile $$relfile-[0-9] $$relfile-[0-9][0-9] $$relfile_i[0-9] $$relfile_i[0-9][0-9]; \
+ else :; fi); \
+ done
+@@ -403,10 +406,13 @@ dist-info: $(INFO_DEPS)
+ $(srcdir)/*) base=`echo "$$base" | sed "s|^$$srcdirstrip/||"`;; \
+ esac; \
+ if test -f $$base; then d=.; else d=$(srcdir); fi; \
+- for file in $$d/$$base*; do \
+- relfile=`expr "$$file" : "$$d/\(.*\)"`; \
+- test -f $(distdir)/$$relfile || \
+- cp -p $$file $(distdir)/$$relfile; \
++ base_i=`echo "$$base" | sed 's|\.info$$||;s|$$|.i|'`; \
++ for file in $$d/$$base $$d/$$base-[0-9] $$d/$$base-[0-9][0-9] $$d/$$base_i[0-9] $$d/$$base_i[0-9][0-9]; do \
++ if test -f $$file; then \
++ relfile=`expr "$$file" : "$$d/\(.*\)"`; \
++ test -f $(distdir)/$$relfile || \
++ cp -p $$file $(distdir)/$$relfile; \
++ else :; fi; \
+ done; \
+ done
+
+diff -rup grub-0.97.oorig/grub/Makefile.in grub-0.97/grub/Makefile.in
+--- grub-0.97.oorig/grub/Makefile.in 2005-05-08 04:42:34.000000000 +0200
++++ grub-0.97/grub/Makefile.in 2006-03-12 14:00:43.000000000 +0100
+@@ -1,8 +1,8 @@
+-# Makefile.in generated by automake 1.9.4 from Makefile.am.
++# Makefile.in generated by automake 1.9.6 from Makefile.am.
+ # @configure_input@
+
+ # Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002,
+-# 2003, 2004 Free Software Foundation, Inc.
++# 2003, 2004, 2005 Free Software Foundation, Inc.
+ # This Makefile.in is free software; the Free Software Foundation
+ # gives unlimited permission to copy and/or distribute it,
+ # with or without modifications, as long as this notice is preserved.
+@@ -14,8 +14,6 @@
+
+ @SET_MAKE@
+
+-SOURCES = $(grub_SOURCES)
+-
+ srcdir = @srcdir@
+ top_srcdir = @top_srcdir@
+ VPATH = @srcdir@
+@@ -97,6 +95,8 @@ ECHO_T = @ECHO_T@
+ EGREP = @EGREP@
+ EXEEXT = @EXEEXT@
+ FSYS_CFLAGS = @FSYS_CFLAGS@
++GRAPHICS_SUPPORT_FALSE = @GRAPHICS_SUPPORT_FALSE@
++GRAPHICS_SUPPORT_TRUE = @GRAPHICS_SUPPORT_TRUE@
+ GRUB_CFLAGS = @GRUB_CFLAGS@
+ GRUB_LIBS = @GRUB_LIBS@
+ HERCULES_SUPPORT_FALSE = @HERCULES_SUPPORT_FALSE@
+diff -rup grub-0.97.oorig/lib/Makefile.in grub-0.97/lib/Makefile.in
+--- grub-0.97.oorig/lib/Makefile.in 2005-05-08 04:42:35.000000000 +0200
++++ grub-0.97/lib/Makefile.in 2006-03-12 14:00:44.000000000 +0100
+@@ -1,8 +1,8 @@
+-# Makefile.in generated by automake 1.9.4 from Makefile.am.
++# Makefile.in generated by automake 1.9.6 from Makefile.am.
+ # @configure_input@
+
+ # Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002,
+-# 2003, 2004 Free Software Foundation, Inc.
++# 2003, 2004, 2005 Free Software Foundation, Inc.
+ # This Makefile.in is free software; the Free Software Foundation
+ # gives unlimited permission to copy and/or distribute it,
+ # with or without modifications, as long as this notice is preserved.
+@@ -14,8 +14,6 @@
+
+ @SET_MAKE@
+
+-SOURCES = $(libcommon_a_SOURCES)
+-
+ srcdir = @srcdir@
+ top_srcdir = @top_srcdir@
+ VPATH = @srcdir@
+@@ -96,6 +94,8 @@ ECHO_T = @ECHO_T@
+ EGREP = @EGREP@
+ EXEEXT = @EXEEXT@
+ FSYS_CFLAGS = @FSYS_CFLAGS@
++GRAPHICS_SUPPORT_FALSE = @GRAPHICS_SUPPORT_FALSE@
++GRAPHICS_SUPPORT_TRUE = @GRAPHICS_SUPPORT_TRUE@
+ GRUB_CFLAGS = @GRUB_CFLAGS@
+ GRUB_LIBS = @GRUB_LIBS@
+ HERCULES_SUPPORT_FALSE = @HERCULES_SUPPORT_FALSE@
+diff -rup grub-0.97.oorig/Makefile.in grub-0.97/Makefile.in
+--- grub-0.97.oorig/Makefile.in 2005-05-08 04:42:40.000000000 +0200
++++ grub-0.97/Makefile.in 2006-03-12 14:00:49.000000000 +0100
+@@ -1,8 +1,8 @@
+-# Makefile.in generated by automake 1.9.4 from Makefile.am.
++# Makefile.in generated by automake 1.9.6 from Makefile.am.
+ # @configure_input@
+
+ # Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002,
+-# 2003, 2004 Free Software Foundation, Inc.
++# 2003, 2004, 2005 Free Software Foundation, Inc.
+ # This Makefile.in is free software; the Free Software Foundation
+ # gives unlimited permission to copy and/or distribute it,
+ # with or without modifications, as long as this notice is preserved.
+@@ -101,6 +101,8 @@ ECHO_T = @ECHO_T@
+ EGREP = @EGREP@
+ EXEEXT = @EXEEXT@
+ FSYS_CFLAGS = @FSYS_CFLAGS@
++GRAPHICS_SUPPORT_FALSE = @GRAPHICS_SUPPORT_FALSE@
++GRAPHICS_SUPPORT_TRUE = @GRAPHICS_SUPPORT_TRUE@
+ GRUB_CFLAGS = @GRUB_CFLAGS@
+ GRUB_LIBS = @GRUB_LIBS@
+ HERCULES_SUPPORT_FALSE = @HERCULES_SUPPORT_FALSE@
+@@ -250,7 +252,13 @@ uninstall-info-am:
+ # (which will cause the Makefiles to be regenerated when you run `make');
+ # (2) otherwise, pass the desired values on the `make' command line.
+ $(RECURSIVE_TARGETS):
+- @set fnord $$MAKEFLAGS; amf=$$2; \
++ @failcom='exit 1'; \
++ for f in x $$MAKEFLAGS; do \
++ case $$f in \
++ *=* | --[!k]*);; \
++ *k*) failcom='fail=yes';; \
++ esac; \
++ done; \
+ dot_seen=no; \
+ target=`echo $@ | sed s/-recursive//`; \
+ list='$(SUBDIRS)'; for subdir in $$list; do \
+@@ -262,7 +270,7 @@ $(RECURSIVE_TARGETS):
+ local_target="$$target"; \
+ fi; \
+ (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
+- || case "$$amf" in *=*) exit 1;; *k*) fail=yes;; *) exit 1;; esac; \
++ || eval $$failcom; \
+ done; \
+ if test "$$dot_seen" = "no"; then \
+ $(MAKE) $(AM_MAKEFLAGS) "$$target-am" || exit 1; \
+@@ -270,7 +278,13 @@ $(RECURSIVE_TARGETS):
+
+ mostlyclean-recursive clean-recursive distclean-recursive \
+ maintainer-clean-recursive:
+- @set fnord $$MAKEFLAGS; amf=$$2; \
++ @failcom='exit 1'; \
++ for f in x $$MAKEFLAGS; do \
++ case $$f in \
++ *=* | --[!k]*);; \
++ *k*) failcom='fail=yes';; \
++ esac; \
++ done; \
+ dot_seen=no; \
+ case "$@" in \
+ distclean-* | maintainer-clean-*) list='$(DIST_SUBDIRS)' ;; \
+@@ -291,7 +305,7 @@ maintainer-clean-recursive:
+ local_target="$$target"; \
+ fi; \
+ (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
+- || case "$$amf" in *=*) exit 1;; *k*) fail=yes;; *) exit 1;; esac; \
++ || eval $$failcom; \
+ done && test -z "$$fail"
+ tags-recursive:
+ list='$(SUBDIRS)'; for subdir in $$list; do \
+diff -rup grub-0.97.oorig/netboot/Makefile.in grub-0.97/netboot/Makefile.in
+--- grub-0.97.oorig/netboot/Makefile.in 2005-05-08 04:42:35.000000000 +0200
++++ grub-0.97/netboot/Makefile.in 2006-03-12 14:00:44.000000000 +0100
+@@ -1,8 +1,8 @@
+-# Makefile.in generated by automake 1.9.4 from Makefile.am.
++# Makefile.in generated by automake 1.9.6 from Makefile.am.
+ # @configure_input@
+
+ # Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002,
+-# 2003, 2004 Free Software Foundation, Inc.
++# 2003, 2004, 2005 Free Software Foundation, Inc.
+ # This Makefile.in is free software; the Free Software Foundation
+ # gives unlimited permission to copy and/or distribute it,
+ # with or without modifications, as long as this notice is preserved.
+@@ -14,8 +14,6 @@
+
+ @SET_MAKE@
+
+-SOURCES = $(libdrivers_a_SOURCES) $(EXTRA_libdrivers_a_SOURCES)
+-
+ srcdir = @srcdir@
+ top_srcdir = @top_srcdir@
+ VPATH = @srcdir@
+@@ -97,6 +95,8 @@ ECHO_T = @ECHO_T@
+ EGREP = @EGREP@
+ EXEEXT = @EXEEXT@
+ FSYS_CFLAGS = @FSYS_CFLAGS@
++GRAPHICS_SUPPORT_FALSE = @GRAPHICS_SUPPORT_FALSE@
++GRAPHICS_SUPPORT_TRUE = @GRAPHICS_SUPPORT_TRUE@
+ GRUB_CFLAGS = @GRUB_CFLAGS@
+ GRUB_LIBS = @GRUB_LIBS@
+ HERCULES_SUPPORT_FALSE = @HERCULES_SUPPORT_FALSE@
+diff -rup grub-0.97.oorig/stage1/Makefile.in grub-0.97/stage1/Makefile.in
+--- grub-0.97.oorig/stage1/Makefile.in 2005-05-08 04:42:36.000000000 +0200
++++ grub-0.97/stage1/Makefile.in 2006-03-12 14:00:45.000000000 +0100
+@@ -1,8 +1,8 @@
+-# Makefile.in generated by automake 1.9.4 from Makefile.am.
++# Makefile.in generated by automake 1.9.6 from Makefile.am.
+ # @configure_input@
+
+ # Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002,
+-# 2003, 2004 Free Software Foundation, Inc.
++# 2003, 2004, 2005 Free Software Foundation, Inc.
+ # This Makefile.in is free software; the Free Software Foundation
+ # gives unlimited permission to copy and/or distribute it,
+ # with or without modifications, as long as this notice is preserved.
+@@ -15,8 +15,6 @@
+ @SET_MAKE@
+
+
+-SOURCES = $(stage1_exec_SOURCES)
+-
+ srcdir = @srcdir@
+ top_srcdir = @top_srcdir@
+ VPATH = @srcdir@
+@@ -102,6 +100,8 @@ ECHO_T = @ECHO_T@
+ EGREP = @EGREP@
+ EXEEXT = @EXEEXT@
+ FSYS_CFLAGS = @FSYS_CFLAGS@
++GRAPHICS_SUPPORT_FALSE = @GRAPHICS_SUPPORT_FALSE@
++GRAPHICS_SUPPORT_TRUE = @GRAPHICS_SUPPORT_TRUE@
+ GRUB_CFLAGS = @GRUB_CFLAGS@
+ GRUB_LIBS = @GRUB_LIBS@
+ HERCULES_SUPPORT_FALSE = @HERCULES_SUPPORT_FALSE@
+diff -rup grub-0.97.oorig/stage2/Makefile.in grub-0.97/stage2/Makefile.in
+--- grub-0.97.oorig/stage2/Makefile.in 2005-05-08 04:42:39.000000000 +0200
++++ grub-0.97/stage2/Makefile.in 2006-03-12 14:00:48.000000000 +0100
+@@ -1,8 +1,8 @@
+-# Makefile.in generated by automake 1.9.4 from Makefile.am.
++# Makefile.in generated by automake 1.9.6 from Makefile.am.
+ # @configure_input@
+
+ # Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002,
+-# 2003, 2004 Free Software Foundation, Inc.
++# 2003, 2004, 2005 Free Software Foundation, Inc.
+ # This Makefile.in is free software; the Free Software Foundation
+ # gives unlimited permission to copy and/or distribute it,
+ # with or without modifications, as long as this notice is preserved.
+@@ -18,8 +18,6 @@
+
+
+
+-SOURCES = $(libgrub_a_SOURCES) $(diskless_exec_SOURCES) $(e2fs_stage1_5_exec_SOURCES) $(fat_stage1_5_exec_SOURCES) $(ffs_stage1_5_exec_SOURCES) $(iso9660_stage1_5_exec_SOURCES) $(jfs_stage1_5_exec_SOURCES) $(minix_stage1_5_exec_SOURCES) $(nbloader_exec_SOURCES) $(pre_stage2_exec_SOURCES) $(pxeloader_exec_SOURCES) $(reiserfs_stage1_5_exec_SOURCES) $(start_exec_SOURCES) $(start_eltorito_exec_SOURCES) $(ufs2_stage1_5_exec_SOURCES) $(vstafs_stage1_5_exec_SOURCES) $(xfs_stage1_5_exec_SOURCES)
+-
+ srcdir = @srcdir@
+ top_srcdir = @top_srcdir@
+ VPATH = @srcdir@
+@@ -100,7 +98,7 @@ am_libgrub_a_OBJECTS = libgrub_a-boot.$(
+ libgrub_a-fsys_xfs.$(OBJEXT) libgrub_a-gunzip.$(OBJEXT) \
+ libgrub_a-md5.$(OBJEXT) libgrub_a-serial.$(OBJEXT) \
+ libgrub_a-stage2.$(OBJEXT) libgrub_a-terminfo.$(OBJEXT) \
+- libgrub_a-tparm.$(OBJEXT)
++ libgrub_a-tparm.$(OBJEXT) libgrub_a-graphics.$(OBJEXT)
+ libgrub_a_OBJECTS = $(am_libgrub_a_OBJECTS)
+ PROGRAMS = $(noinst_PROGRAMS)
+ am__objects_1 = diskless_exec-asm.$(OBJEXT) \
+@@ -125,7 +123,8 @@ am__objects_1 = diskless_exec-asm.$(OBJE
+ diskless_exec-serial.$(OBJEXT) \
+ diskless_exec-smp-imps.$(OBJEXT) \
+ diskless_exec-stage2.$(OBJEXT) \
+- diskless_exec-terminfo.$(OBJEXT) diskless_exec-tparm.$(OBJEXT)
++ diskless_exec-terminfo.$(OBJEXT) diskless_exec-tparm.$(OBJEXT) \
++ diskless_exec-graphics.$(OBJEXT)
+ am_diskless_exec_OBJECTS = $(am__objects_1)
+ diskless_exec_OBJECTS = $(am_diskless_exec_OBJECTS)
+ diskless_exec_DEPENDENCIES = ../netboot/libdrivers.a
+@@ -217,7 +216,8 @@ am_pre_stage2_exec_OBJECTS = pre_stage2_
+ pre_stage2_exec-smp-imps.$(OBJEXT) \
+ pre_stage2_exec-stage2.$(OBJEXT) \
+ pre_stage2_exec-terminfo.$(OBJEXT) \
+- pre_stage2_exec-tparm.$(OBJEXT)
++ pre_stage2_exec-tparm.$(OBJEXT) \
++ pre_stage2_exec-graphics.$(OBJEXT)
+ pre_stage2_exec_OBJECTS = $(am_pre_stage2_exec_OBJECTS)
+ @NETBOOT_SUPPORT_TRUE@pre_stage2_exec_DEPENDENCIES = \
+ @NETBOOT_SUPPORT_TRUE@ ../netboot/libdrivers.a
+@@ -344,6 +344,8 @@ ECHO_T = @ECHO_T@
+ EGREP = @EGREP@
+ EXEEXT = @EXEEXT@
+ FSYS_CFLAGS = @FSYS_CFLAGS@
++GRAPHICS_SUPPORT_FALSE = @GRAPHICS_SUPPORT_FALSE@
++GRAPHICS_SUPPORT_TRUE = @GRAPHICS_SUPPORT_TRUE@
+ GRUB_CFLAGS = @GRUB_CFLAGS@
+ GRUB_LIBS = @GRUB_LIBS@
+ HERCULES_SUPPORT_FALSE = @HERCULES_SUPPORT_FALSE@
+@@ -435,7 +437,7 @@ noinst_HEADERS = apic.h defs.h dir.h dis
+ fat.h filesys.h freebsd.h fs.h hercules.h i386-elf.h \
+ imgact_aout.h iso9660.h jfs.h mb_header.h mb_info.h md5.h \
+ nbi.h pc_slice.h serial.h shared.h smp-imps.h term.h \
+- terminfo.h tparm.h nbi.h ufs2.h vstafs.h xfs.h
++ terminfo.h tparm.h nbi.h ufs2.h vstafs.h xfs.h graphics.h
+
+ EXTRA_DIST = setjmp.S apm.S $(noinst_SCRIPTS)
+
+@@ -448,7 +450,7 @@ libgrub_a_SOURCES = boot.c builtins.c ch
+ disk_io.c fsys_ext2fs.c fsys_fat.c fsys_ffs.c fsys_iso9660.c \
+ fsys_jfs.c fsys_minix.c fsys_reiserfs.c fsys_ufs2.c \
+ fsys_vstafs.c fsys_xfs.c gunzip.c md5.c serial.c stage2.c \
+- terminfo.c tparm.c
++ terminfo.c tparm.c graphics.c
+
+ libgrub_a_CFLAGS = $(GRUB_CFLAGS) -I$(top_srcdir)/lib \
+ -DGRUB_UTIL=1 -DFSYS_EXT2FS=1 -DFSYS_FAT=1 -DFSYS_FFS=1 \
+@@ -479,8 +481,10 @@ START_ELTORITO_LINK = -nostdlib -Wl,-N -
+ @SERIAL_SUPPORT_TRUE@SERIAL_FLAGS = -DSUPPORT_SERIAL=1
+ @HERCULES_SUPPORT_FALSE@HERCULES_FLAGS =
+ @HERCULES_SUPPORT_TRUE@HERCULES_FLAGS = -DSUPPORT_HERCULES=1
++@GRAPHICS_SUPPORT_FALSE@GRAPHICS_FLAGS =
++@GRAPHICS_SUPPORT_TRUE@GRAPHICS_FLAGS = -DSUPPORT_GRAPHICS=1
+ STAGE2_COMPILE = $(STAGE2_CFLAGS) -fno-builtin -nostdinc \
+- $(NETBOOT_FLAGS) $(SERIAL_FLAGS) $(HERCULES_FLAGS)
++ $(NETBOOT_FLAGS) $(SERIAL_FLAGS) $(HERCULES_FLAGS) $(GRAPHICS_FLAGS)
+
+ STAGE1_5_LINK = -nostdlib -Wl,-N -Wl,-Ttext -Wl,2000
+ STAGE1_5_COMPILE = $(STAGE2_COMPILE) -DNO_DECOMPRESSION=1 -DSTAGE1_5=1
+@@ -490,7 +494,8 @@ pre_stage2_exec_SOURCES = asm.S bios.c b
+ cmdline.c common.c console.c disk_io.c fsys_ext2fs.c \
+ fsys_fat.c fsys_ffs.c fsys_iso9660.c fsys_jfs.c fsys_minix.c \
+ fsys_reiserfs.c fsys_ufs2.c fsys_vstafs.c fsys_xfs.c gunzip.c \
+- hercules.c md5.c serial.c smp-imps.c stage2.c terminfo.c tparm.c
++ hercules.c md5.c serial.c smp-imps.c stage2.c terminfo.c tparm.c \
++ graphics.c
+
+ pre_stage2_exec_CFLAGS = $(STAGE2_COMPILE) $(FSYS_CFLAGS)
+ pre_stage2_exec_CCASFLAGS = $(STAGE2_COMPILE) $(FSYS_CFLAGS)
+@@ -766,6 +771,7 @@ distclean-compile:
+ @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/diskless_exec-fsys_ufs2.Po@am__quote@
+ @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/diskless_exec-fsys_vstafs.Po@am__quote@
+ @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/diskless_exec-fsys_xfs.Po@am__quote@
++@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/diskless_exec-graphics.Po@am__quote@
+ @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/diskless_exec-gunzip.Po@am__quote@
+ @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/diskless_exec-hercules.Po@am__quote@
+ @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/diskless_exec-md5.Po@am__quote@
+@@ -820,6 +826,7 @@ distclean-compile:
+ @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/libgrub_a-fsys_ufs2.Po@am__quote@
+ @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/libgrub_a-fsys_vstafs.Po@am__quote@
+ @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/libgrub_a-fsys_xfs.Po@am__quote@
++@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/libgrub_a-graphics.Po@am__quote@
+ @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/libgrub_a-gunzip.Po@am__quote@
+ @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/libgrub_a-md5.Po@am__quote@
+ @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/libgrub_a-serial.Po@am__quote@
+@@ -850,6 +857,7 @@ distclean-compile:
+ @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/pre_stage2_exec-fsys_ufs2.Po@am__quote@
+ @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/pre_stage2_exec-fsys_vstafs.Po@am__quote@
+ @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/pre_stage2_exec-fsys_xfs.Po@am__quote@
++@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/pre_stage2_exec-graphics.Po@am__quote@
+ @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/pre_stage2_exec-gunzip.Po@am__quote@
+ @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/pre_stage2_exec-hercules.Po@am__quote@
+ @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/pre_stage2_exec-md5.Po@am__quote@
+@@ -1367,6 +1375,20 @@ libgrub_a-tparm.obj: tparm.c
+ @AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
+ @am__fastdepCC_FALSE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(libgrub_a_CFLAGS) $(CFLAGS) -c -o libgrub_a-tparm.obj `if test -f 'tparm.c'; then $(CYGPATH_W) 'tparm.c'; else $(CYGPATH_W) '$(srcdir)/tparm.c'; fi`
+
++libgrub_a-graphics.o: graphics.c
++@am__fastdepCC_TRUE@ if $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(libgrub_a_CFLAGS) $(CFLAGS) -MT libgrub_a-graphics.o -MD -MP -MF "$(DEPDIR)/libgrub_a-graphics.Tpo" -c -o libgrub_a-graphics.o `test -f 'graphics.c' || echo '$(srcdir)/'`graphics.c; \
++@am__fastdepCC_TRUE@ then mv -f "$(DEPDIR)/libgrub_a-graphics.Tpo" "$(DEPDIR)/libgrub_a-graphics.Po"; else rm -f "$(DEPDIR)/libgrub_a-graphics.Tpo"; exit 1; fi
++@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='graphics.c' object='libgrub_a-graphics.o' libtool=no @AMDEPBACKSLASH@
++@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
++@am__fastdepCC_FALSE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(libgrub_a_CFLAGS) $(CFLAGS) -c -o libgrub_a-graphics.o `test -f 'graphics.c' || echo '$(srcdir)/'`graphics.c
++
++libgrub_a-graphics.obj: graphics.c
++@am__fastdepCC_TRUE@ if $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(libgrub_a_CFLAGS) $(CFLAGS) -MT libgrub_a-graphics.obj -MD -MP -MF "$(DEPDIR)/libgrub_a-graphics.Tpo" -c -o libgrub_a-graphics.obj `if test -f 'graphics.c'; then $(CYGPATH_W) 'graphics.c'; else $(CYGPATH_W) '$(srcdir)/graphics.c'; fi`; \
++@am__fastdepCC_TRUE@ then mv -f "$(DEPDIR)/libgrub_a-graphics.Tpo" "$(DEPDIR)/libgrub_a-graphics.Po"; else rm -f "$(DEPDIR)/libgrub_a-graphics.Tpo"; exit 1; fi
++@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='graphics.c' object='libgrub_a-graphics.obj' libtool=no @AMDEPBACKSLASH@
++@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
++@am__fastdepCC_FALSE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(libgrub_a_CFLAGS) $(CFLAGS) -c -o libgrub_a-graphics.obj `if test -f 'graphics.c'; then $(CYGPATH_W) 'graphics.c'; else $(CYGPATH_W) '$(srcdir)/graphics.c'; fi`
++
+ diskless_exec-bios.o: bios.c
+ @am__fastdepCC_TRUE@ if $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(diskless_exec_CFLAGS) $(CFLAGS) -MT diskless_exec-bios.o -MD -MP -MF "$(DEPDIR)/diskless_exec-bios.Tpo" -c -o diskless_exec-bios.o `test -f 'bios.c' || echo '$(srcdir)/'`bios.c; \
+ @am__fastdepCC_TRUE@ then mv -f "$(DEPDIR)/diskless_exec-bios.Tpo" "$(DEPDIR)/diskless_exec-bios.Po"; else rm -f "$(DEPDIR)/diskless_exec-bios.Tpo"; exit 1; fi
+@@ -1731,6 +1753,20 @@ diskless_exec-tparm.obj: tparm.c
+ @AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
+ @am__fastdepCC_FALSE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(diskless_exec_CFLAGS) $(CFLAGS) -c -o diskless_exec-tparm.obj `if test -f 'tparm.c'; then $(CYGPATH_W) 'tparm.c'; else $(CYGPATH_W) '$(srcdir)/tparm.c'; fi`
+
++diskless_exec-graphics.o: graphics.c
++@am__fastdepCC_TRUE@ if $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(diskless_exec_CFLAGS) $(CFLAGS) -MT diskless_exec-graphics.o -MD -MP -MF "$(DEPDIR)/diskless_exec-graphics.Tpo" -c -o diskless_exec-graphics.o `test -f 'graphics.c' || echo '$(srcdir)/'`graphics.c; \
++@am__fastdepCC_TRUE@ then mv -f "$(DEPDIR)/diskless_exec-graphics.Tpo" "$(DEPDIR)/diskless_exec-graphics.Po"; else rm -f "$(DEPDIR)/diskless_exec-graphics.Tpo"; exit 1; fi
++@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='graphics.c' object='diskless_exec-graphics.o' libtool=no @AMDEPBACKSLASH@
++@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
++@am__fastdepCC_FALSE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(diskless_exec_CFLAGS) $(CFLAGS) -c -o diskless_exec-graphics.o `test -f 'graphics.c' || echo '$(srcdir)/'`graphics.c
++
++diskless_exec-graphics.obj: graphics.c
++@am__fastdepCC_TRUE@ if $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(diskless_exec_CFLAGS) $(CFLAGS) -MT diskless_exec-graphics.obj -MD -MP -MF "$(DEPDIR)/diskless_exec-graphics.Tpo" -c -o diskless_exec-graphics.obj `if test -f 'graphics.c'; then $(CYGPATH_W) 'graphics.c'; else $(CYGPATH_W) '$(srcdir)/graphics.c'; fi`; \
++@am__fastdepCC_TRUE@ then mv -f "$(DEPDIR)/diskless_exec-graphics.Tpo" "$(DEPDIR)/diskless_exec-graphics.Po"; else rm -f "$(DEPDIR)/diskless_exec-graphics.Tpo"; exit 1; fi
++@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='graphics.c' object='diskless_exec-graphics.obj' libtool=no @AMDEPBACKSLASH@
++@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
++@am__fastdepCC_FALSE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(diskless_exec_CFLAGS) $(CFLAGS) -c -o diskless_exec-graphics.obj `if test -f 'graphics.c'; then $(CYGPATH_W) 'graphics.c'; else $(CYGPATH_W) '$(srcdir)/graphics.c'; fi`
++
+ e2fs_stage1_5_exec-common.o: common.c
+ @am__fastdepCC_TRUE@ if $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(e2fs_stage1_5_exec_CFLAGS) $(CFLAGS) -MT e2fs_stage1_5_exec-common.o -MD -MP -MF "$(DEPDIR)/e2fs_stage1_5_exec-common.Tpo" -c -o e2fs_stage1_5_exec-common.o `test -f 'common.c' || echo '$(srcdir)/'`common.c; \
+ @am__fastdepCC_TRUE@ then mv -f "$(DEPDIR)/e2fs_stage1_5_exec-common.Tpo" "$(DEPDIR)/e2fs_stage1_5_exec-common.Po"; else rm -f "$(DEPDIR)/e2fs_stage1_5_exec-common.Tpo"; exit 1; fi
+@@ -2599,6 +2635,20 @@ pre_stage2_exec-tparm.obj: tparm.c
+ @AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
+ @am__fastdepCC_FALSE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(pre_stage2_exec_CFLAGS) $(CFLAGS) -c -o pre_stage2_exec-tparm.obj `if test -f 'tparm.c'; then $(CYGPATH_W) 'tparm.c'; else $(CYGPATH_W) '$(srcdir)/tparm.c'; fi`
+
++pre_stage2_exec-graphics.o: graphics.c
++@am__fastdepCC_TRUE@ if $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(pre_stage2_exec_CFLAGS) $(CFLAGS) -MT pre_stage2_exec-graphics.o -MD -MP -MF "$(DEPDIR)/pre_stage2_exec-graphics.Tpo" -c -o pre_stage2_exec-graphics.o `test -f 'graphics.c' || echo '$(srcdir)/'`graphics.c; \
++@am__fastdepCC_TRUE@ then mv -f "$(DEPDIR)/pre_stage2_exec-graphics.Tpo" "$(DEPDIR)/pre_stage2_exec-graphics.Po"; else rm -f "$(DEPDIR)/pre_stage2_exec-graphics.Tpo"; exit 1; fi
++@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='graphics.c' object='pre_stage2_exec-graphics.o' libtool=no @AMDEPBACKSLASH@
++@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
++@am__fastdepCC_FALSE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(pre_stage2_exec_CFLAGS) $(CFLAGS) -c -o pre_stage2_exec-graphics.o `test -f 'graphics.c' || echo '$(srcdir)/'`graphics.c
++
++pre_stage2_exec-graphics.obj: graphics.c
++@am__fastdepCC_TRUE@ if $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(pre_stage2_exec_CFLAGS) $(CFLAGS) -MT pre_stage2_exec-graphics.obj -MD -MP -MF "$(DEPDIR)/pre_stage2_exec-graphics.Tpo" -c -o pre_stage2_exec-graphics.obj `if test -f 'graphics.c'; then $(CYGPATH_W) 'graphics.c'; else $(CYGPATH_W) '$(srcdir)/graphics.c'; fi`; \
++@am__fastdepCC_TRUE@ then mv -f "$(DEPDIR)/pre_stage2_exec-graphics.Tpo" "$(DEPDIR)/pre_stage2_exec-graphics.Po"; else rm -f "$(DEPDIR)/pre_stage2_exec-graphics.Tpo"; exit 1; fi
++@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='graphics.c' object='pre_stage2_exec-graphics.obj' libtool=no @AMDEPBACKSLASH@
++@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
++@am__fastdepCC_FALSE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(pre_stage2_exec_CFLAGS) $(CFLAGS) -c -o pre_stage2_exec-graphics.obj `if test -f 'graphics.c'; then $(CYGPATH_W) 'graphics.c'; else $(CYGPATH_W) '$(srcdir)/graphics.c'; fi`
++
+ reiserfs_stage1_5_exec-common.o: common.c
+ @am__fastdepCC_TRUE@ if $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(reiserfs_stage1_5_exec_CFLAGS) $(CFLAGS) -MT reiserfs_stage1_5_exec-common.o -MD -MP -MF "$(DEPDIR)/reiserfs_stage1_5_exec-common.Tpo" -c -o reiserfs_stage1_5_exec-common.o `test -f 'common.c' || echo '$(srcdir)/'`common.c; \
+ @am__fastdepCC_TRUE@ then mv -f "$(DEPDIR)/reiserfs_stage1_5_exec-common.Tpo" "$(DEPDIR)/reiserfs_stage1_5_exec-common.Po"; else rm -f "$(DEPDIR)/reiserfs_stage1_5_exec-common.Tpo"; exit 1; fi
+diff -rup grub-0.97.oorig/util/Makefile.in grub-0.97/util/Makefile.in
+--- grub-0.97.oorig/util/Makefile.in 2005-05-08 04:42:39.000000000 +0200
++++ grub-0.97/util/Makefile.in 2006-03-12 14:00:48.000000000 +0100
+@@ -1,8 +1,8 @@
+-# Makefile.in generated by automake 1.9.4 from Makefile.am.
++# Makefile.in generated by automake 1.9.6 from Makefile.am.
+ # @configure_input@
+
+ # Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002,
+-# 2003, 2004 Free Software Foundation, Inc.
++# 2003, 2004, 2005 Free Software Foundation, Inc.
+ # This Makefile.in is free software; the Free Software Foundation
+ # gives unlimited permission to copy and/or distribute it,
+ # with or without modifications, as long as this notice is preserved.
+@@ -15,8 +15,6 @@
+ @SET_MAKE@
+
+
+-SOURCES = $(mbchk_SOURCES)
+-
+ srcdir = @srcdir@
+ top_srcdir = @top_srcdir@
+ VPATH = @srcdir@
+@@ -102,6 +100,8 @@ ECHO_T = @ECHO_T@
+ EGREP = @EGREP@
+ EXEEXT = @EXEEXT@
+ FSYS_CFLAGS = @FSYS_CFLAGS@
++GRAPHICS_SUPPORT_FALSE = @GRAPHICS_SUPPORT_FALSE@
++GRAPHICS_SUPPORT_TRUE = @GRAPHICS_SUPPORT_TRUE@
+ GRUB_CFLAGS = @GRUB_CFLAGS@
+ GRUB_LIBS = @GRUB_LIBS@
+ HERCULES_SUPPORT_FALSE = @HERCULES_SUPPORT_FALSE@
--- /dev/null
+--- grub-0.97.oorig/stage2/disk_io.c 2004-05-23 18:35:24.000000000 +0200
++++ grub-0.97/stage2/disk_io.c 2006-03-12 14:11:51.000000000 +0100
+@@ -365,7 +365,7 @@ rawwrite (int drive, int sector, char *b
+ int
+ devwrite (int sector, int sector_count, char *buf)
+ {
+-#if defined(GRUB_UTIL) && defined(__linux__)
++#if defined(GRUB_UTIL) && defined(__linux__) && !defined(SUPPORT_LOOPDEV)
+ if (current_partition != 0xFFFFFF
+ && is_disk_device (device_map, current_drive))
+ {
--- /dev/null
+diff -rup grub-0.97.orig/grub/asmstub.c grub-0.97/grub/asmstub.c
+--- grub-0.97.orig/grub/asmstub.c 2006-11-29 20:36:20.000000000 +0100
++++ grub-0.97/grub/asmstub.c 2006-11-29 21:26:16.000000000 +0100
+@@ -18,10 +18,13 @@
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
++#include <features.h>
++#if !defined __UCLIBC__ || (defined __UCLIBC__ && defined __UCLIBC_HAS_LFS__)
+ /* Try to use glibc's transparant LFS support. */
+ #define _LARGEFILE_SOURCE 1
+ /* lseek becomes synonymous with lseek64. */
+ #define _FILE_OFFSET_BITS 64
++#endif
+
+ /* Simulator entry point. */
+ int grub_stage2 (void);
+diff -rup grub-0.97.orig/lib/device.c grub-0.97/lib/device.c
+--- grub-0.97.orig/lib/device.c 2006-11-29 20:36:20.000000000 +0100
++++ grub-0.97/lib/device.c 2006-11-29 21:25:19.000000000 +0100
+@@ -18,10 +18,13 @@
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
++#include <features.h>
++#if !defined __UCLIBC__ || (defined __UCLIBC__ && defined __UCLIBC_HAS_LFS__)
+ /* Try to use glibc's transparant LFS support. */
+ #define _LARGEFILE_SOURCE 1
+ /* lseek becomes synonymous with lseek64. */
+ #define _FILE_OFFSET_BITS 64
++#endif
+
+ #include <stdio.h>
+ #include <stdlib.h>
--- /dev/null
+GRUB_SUPPORTED_ARCH=n
+ifeq ($(ARCH),i386)
+GRUB_SUPPORTED_ARCH=y
+endif
+ifeq ($(ARCH),i486)
+GRUB_SUPPORTED_ARCH=y
+endif
+ifeq ($(ARCH),i586)
+GRUB_SUPPORTED_ARCH=y
+endif
+ifeq ($(ARCH),i686)
+GRUB_SUPPORTED_ARCH=y
+endif
+ifeq ($(ARCH),x86_64)
+GRUB_SUPPORTED_ARCH=y
+endif
+ifeq ($(GRUB_SUPPORTED_ARCH),y)
+#############################################################
+#
+# grub
+#
+#############################################################
+GRUB_SOURCE:=grub_0.97.orig.tar.gz
+GRUB_PATCH:=grub_0.97-35.diff.gz
+GRUB_SITE:=http://snapshot.debian.net/archive/2008/03/29/debian/pool/main/g/grub/
+GRUB_PATCH_SITE:=$(GRUB_SITE)
+GRUB_CAT:=$(ZCAT)
+GRUB_DIR:=$(BUILD_DIR)/grub-0.97
+GRUB_BINARY:=grub/grub
+GRUB_TARGET_BINARY:=sbin/grub
+GRUB_SPLASHIMAGE=$(TOPDIR)/target/x86/grub/splash.xpm.gz
+
+
+GRUB_CFLAGS=-DSUPPORT_LOOPDEV
+ifeq ($(BR2_LARGEFILE),)
+GRUB_CFLAGS+=-U_FILE_OFFSET_BITS
+endif
+
+
+GRUB_CONFIG-$(BR2_TARGET_GRUB_SPLASH) += --enable-graphics
+GRUB_CONFIG-$(BR2_TARGET_GRUB_DISKLESS) += --enable-diskless
+GRUB_CONFIG-$(BR2_TARGET_GRUB_3c595) += --enable-3c595
+GRUB_CONFIG-$(BR2_TARGET_GRUB_3c90x) += --enable-3c90x
+GRUB_CONFIG-$(BR2_TARGET_GRUB_davicom) += --enable-davicom
+GRUB_CONFIG-$(BR2_TARGET_GRUB_e1000) += --enable-e1000
+GRUB_CONFIG-$(BR2_TARGET_GRUB_eepro100) += --enable-eepro100
+GRUB_CONFIG-$(BR2_TARGET_GRUB_epic100) += --enable-epic100
+GRUB_CONFIG-$(BR2_TARGET_GRUB_forcedeth) += --enable-forcedeth
+GRUB_CONFIG-$(BR2_TARGET_GRUB_natsemi) += --enable-natsemi
+GRUB_CONFIG-$(BR2_TARGET_GRUB_ns83820) += --enable-ns83820
+GRUB_CONFIG-$(BR2_TARGET_GRUB_ns8390) += --enable-ns8390
+GRUB_CONFIG-$(BR2_TARGET_GRUB_pcnet32) += --enable-pcnet32
+GRUB_CONFIG-$(BR2_TARGET_GRUB_pnic) += --enable-pnic
+GRUB_CONFIG-$(BR2_TARGET_GRUB_rtl8139) += --enable-rtl8139
+GRUB_CONFIG-$(BR2_TARGET_GRUB_r8169) += --enable-r8169
+GRUB_CONFIG-$(BR2_TARGET_GRUB_sis900) += --enable-sis900
+GRUB_CONFIG-$(BR2_TARGET_GRUB_tg3) += --enable-tg3
+GRUB_CONFIG-$(BR2_TARGET_GRUB_tulip) += --enable-tulip
+GRUB_CONFIG-$(BR2_TARGET_GRUB_tlan) += --enable-tlan
+GRUB_CONFIG-$(BR2_TARGET_GRUB_undi) += --enable-undi
+GRUB_CONFIG-$(BR2_TARGET_GRUB_via_rhine) += --enable-via-rhine
+GRUB_CONFIG-$(BR2_TARGET_GRUB_w89c840) += --enable-w89c840
+
+$(DL_DIR)/$(GRUB_SOURCE):
+ $(call DOWNLOAD,$(GRUB_SITE),$(GRUB_SOURCE))
+
+$(DL_DIR)/$(GRUB_PATCH):
+ $(call DOWNLOAD,$(GRUB_PATCH_SITE),$(GRUB_PATCH))
+
+grub-source: $(DL_DIR)/$(GRUB_SOURCE) $(DL_DIR)/$(GRUB_PATCH)
+
+$(GRUB_DIR)/.unpacked: $(DL_DIR)/$(GRUB_SOURCE) $(DL_DIR)/$(GRUB_PATCH)
+ $(GRUB_CAT) $(DL_DIR)/$(GRUB_SOURCE) | tar -C $(BUILD_DIR) -xvf -
+ toolchain/patch-kernel.sh $(GRUB_DIR) $(DL_DIR) $(GRUB_PATCH)
+ for i in `grep -v "^#" $(GRUB_DIR)/debian/patches/00list`; do \
+ cat $(GRUB_DIR)/debian/patches/$$i | patch -p1 -d $(GRUB_DIR); \
+ done
+ toolchain/patch-kernel.sh $(GRUB_DIR) boot/grub grub.\*.patch{,.bz2}
+ touch $@
+
+$(GRUB_DIR)/.configured: $(GRUB_DIR)/.unpacked
+ (cd $(GRUB_DIR); rm -rf config.cache; \
+ $(TARGET_CONFIGURE_OPTS) \
+ CFLAGS="$(TARGET_CFLAGS)" \
+ CPPFLAGS="$(GRUB_CFLAGS)" \
+ ./configure $(QUIET) \
+ --target=$(GNU_TARGET_NAME) \
+ --host=$(GNU_TARGET_NAME) \
+ --build=$(GNU_HOST_NAME) \
+ --prefix=/ \
+ --mandir=/usr/man \
+ --infodir=/usr/info \
+ --disable-auto-linux-mem-opt \
+ $(GRUB_CONFIG-y) \
+ )
+ touch $@
+
+$(GRUB_DIR)/$(GRUB_BINARY): $(GRUB_DIR)/.configured
+ $(MAKE) CC=$(TARGET_CC) -C $(GRUB_DIR)
+ rm -f $(GRUB_DIR)/$(GRUB_BINARY)
+ $(MAKE) CC=$(TARGET_CC) CFLAGS+=-static -C $(GRUB_DIR)/grub grub
+ mkdir -p $(dir $(STAGING_DIR)/$(GRUB_TARGET_BINARY))
+ mv $(GRUB_DIR)/$(GRUB_BINARY) $(STAGING_DIR)/$(GRUB_TARGET_BINARY).static
+ $(MAKE) CC=$(TARGET_CC) -C $(GRUB_DIR)/grub
+
+$(GRUB_DIR)/.installed: $(GRUB_DIR)/$(GRUB_BINARY)
+ cp $(GRUB_DIR)/$(GRUB_BINARY) $(TARGET_DIR)/$(GRUB_TARGET_BINARY)
+ test -d $(TARGET_DIR)/boot/grub || mkdir -p $(TARGET_DIR)/boot/grub
+ cp $(GRUB_DIR)/stage1/stage1 $(GRUB_DIR)/stage2/*1_5 $(GRUB_DIR)/stage2/stage2 $(TARGET_DIR)/boot/grub/
+ifeq ($(BR2_TARGET_GRUB_SPLASH),y)
+ test -f $(TARGET_DIR)/boot/grub/$(GRUB_SPLASHIMAGE) || \
+ cp $(GRUB_SPLASHIMAGE) $(TARGET_DIR)/boot/grub/
+endif
+ touch $@
+
+grub: uclibc $(GRUB_DIR)/.installed
+
+grub-clean:
+ $(MAKE) DESTDIR=$(TARGET_DIR) CC=$(TARGET_CC) -C $(GRUB_DIR) uninstall
+ -$(MAKE) -C $(GRUB_DIR) clean
+ rm -f $(TARGET_DIR)/boot/grub/$(GRUB_SPLASHIMAGE) \
+ $(TARGET_DIR)/sbin/$(GRUB_BINARY) \
+ $(TARGET_DIR)/boot/grub/{stage{1,2},*1_5}
+
+grub-dirclean:
+ rm -rf $(GRUB_DIR)
+
+endif
+
+#############################################################
+#
+# Toplevel Makefile options
+#
+#############################################################
+ifeq ($(BR2_TARGET_GRUB),y)
+TARGETS+=grub
+endif
--- /dev/null
+default=0
+timeout=5
+splashimage=(hd0,0)/boot/grub/splash.xpm.gz
+hiddenmenu
+title Buildroot
+ root (hd0,0)
+ kernel /boot/bzImage rw root=/dev/hda1 vga=791
--- /dev/null
+config BR2_TARGET_GRUB2
+ bool "grub2"
+ help
+ The GRand Unified Bootloader for x86 systems, take #2.
+
+config BR2_TARGET_GRUB2_SPLASH
+ bool "Splashimage support"
+ depends on BR2_TARGET_GRUB2
+ help
+ Add support for splashimage.
+
+ A splashimage is a 14-color indexed .xpm picture which
+ is displayed as background for the grub menu.
--- /dev/null
+? config.status.lineno
+? fix-grub-install.diff
+? genkernsyms.sh
+? gensymlist.sh
+? grub-mkimage.d
+? grub_script.tab.c
+? grub_script.tab.h
+? kernel_elf_symlist.c
+Index: util/powerpc/ieee1275/grub-install.in
+===================================================================
+RCS file: /cvsroot/grub/grub2/util/powerpc/ieee1275/grub-install.in,v
+retrieving revision 1.5
+diff -u -r1.5 grub-install.in
+--- grub-1.95/util/powerpc/ieee1275/grub-install.in 28 May 2006 23:01:43 -0000 1.5
++++ grub-1.95/util/powerpc/ieee1275/grub-install.in 4 Mar 2007 19:05:47 -0000
+@@ -23,6 +23,7 @@
+ # Initialize some variables.
+ prefix=@prefix@
+ exec_prefix=@exec_prefix@
++bindir=@bindir@
+ sbindir=@sbindir@
+ libdir=@libdir@
+ PACKAGE_NAME=@PACKAGE_NAME@
--- /dev/null
+GRUB2_SUPPORTED_ARCH=n
+ifeq ($(ARCH),i386)
+GRUB2_SUPPORTED_ARCH=y
+endif
+ifeq ($(ARCH),i486)
+GRUB2_SUPPORTED_ARCH=y
+endif
+ifeq ($(ARCH),i586)
+GRUB2_SUPPORTED_ARCH=y
+endif
+ifeq ($(ARCH),i686)
+GRUB2_SUPPORTED_ARCH=y
+endif
+ifeq ($(ARCH),x86_64)
+GRUB2_SUPPORTED_ARCH=y
+endif
+ifeq ($(GRUB2_SUPPORTED_ARCH),y)
+#############################################################
+#
+# grub2
+#
+#############################################################
+GRUB2_SOURCE:=grub2_1.95.orig.tar.gz
+GRUB2_PATCH:=grub2_1.95-5.diff.gz
+GRUB2_SITE=$(BR2_DEBIAN_MIRROR)/debian/pool/main/g/grub2
+GRUB2_PATCH_SITE:=$(BR2_DEBIAN_MIRROR)/debian/pool/main/g/grub2
+GRUB2_CAT:=$(ZCAT)
+GRUB2_DIR:=$(BUILD_DIR)/grub-1.95
+GRUB2_BINARY:=grub2/grub2
+GRUB2_TARGET_BINARY:=sbin/grub2
+GRUB2_SPLASHIMAGE=$(TOPDIR)/target/x86/grub/splash.xpm.gz
+
+
+GRUB2_CFLAGS=-DSUPPORT_LOOPDEV
+ifeq ($(BR2_LARGEFILE),)
+GRUB2_CFLAGS+=-U_FILE_OFFSET_BITS
+endif
+
+
+GRUB2_CONFIG-$(BR2_TARGET_GRUB2_SPLASH) += --enable-graphics
+GRUB2_CONFIG-$(BR2_TARGET_GRUB2_DISKLESS) += --enable-diskless
+GRUB2_CONFIG-$(BR2_TARGET_GRUB2_3c595) += --enable-3c595
+GRUB2_CONFIG-$(BR2_TARGET_GRUB2_3c90x) += --enable-3c90x
+GRUB2_CONFIG-$(BR2_TARGET_GRUB2_davicom) += --enable-davicom
+GRUB2_CONFIG-$(BR2_TARGET_GRUB2_e1000) += --enable-e1000
+GRUB2_CONFIG-$(BR2_TARGET_GRUB2_eepro100) += --enable-eepro100
+GRUB2_CONFIG-$(BR2_TARGET_GRUB2_epic100) += --enable-epic100
+GRUB2_CONFIG-$(BR2_TARGET_GRUB2_forcedeth) += --enable-forcedeth
+GRUB2_CONFIG-$(BR2_TARGET_GRUB2_natsemi) += --enable-natsemi
+GRUB2_CONFIG-$(BR2_TARGET_GRUB2_ns83820) += --enable-ns83820
+GRUB2_CONFIG-$(BR2_TARGET_GRUB2_ns8390) += --enable-ns8390
+GRUB2_CONFIG-$(BR2_TARGET_GRUB2_pcnet32) += --enable-pcnet32
+GRUB2_CONFIG-$(BR2_TARGET_GRUB2_pnic) += --enable-pnic
+GRUB2_CONFIG-$(BR2_TARGET_GRUB2_rtl8139) += --enable-rtl8139
+GRUB2_CONFIG-$(BR2_TARGET_GRUB2_r8169) += --enable-r8169
+GRUB2_CONFIG-$(BR2_TARGET_GRUB2_sis900) += --enable-sis900
+GRUB2_CONFIG-$(BR2_TARGET_GRUB2_tg3) += --enable-tg3
+GRUB2_CONFIG-$(BR2_TARGET_GRUB2_tulip) += --enable-tulip
+GRUB2_CONFIG-$(BR2_TARGET_GRUB2_tlan) += --enable-tlan
+GRUB2_CONFIG-$(BR2_TARGET_GRUB2_undi) += --enable-undi
+GRUB2_CONFIG-$(BR2_TARGET_GRUB2_via_rhine) += --enable-via-rhine
+GRUB2_CONFIG-$(BR2_TARGET_GRUB2_w89c840) += --enable-w89c840
+
+$(DL_DIR)/$(GRUB2_SOURCE):
+ $(call DOWNLOAD,$(GRUB2_SITE),$(GRUB2_SOURCE))
+
+$(DL_DIR)/$(GRUB2_PATCH):
+ $(call DOWNLOAD,$(GRUB2_PATCH_SITE),$(GRUB2_PATCH))
+
+grub2-source: $(DL_DIR)/$(GRUB2_SOURCE) $(DL_DIR)/$(GRUB2_PATCH)
+
+$(GRUB2_DIR)/.unpacked: $(DL_DIR)/$(GRUB2_SOURCE) $(DL_DIR)/$(GRUB2_PATCH)
+ $(GRUB2_CAT) $(DL_DIR)/$(GRUB2_SOURCE) | tar -C $(BUILD_DIR) -xvf -
+ toolchain/patch-kernel.sh $(GRUB2_DIR) $(DL_DIR) $(GRUB2_PATCH)
+ for i in `grep -v "^#" $(GRUB2_DIR)/debian/patches/00list`; do \
+ cat $(GRUB2_DIR)/debian/patches/$$i | patch -p1 -d $(GRUB2_DIR); \
+ done
+ toolchain/patch-kernel.sh $(GRUB2_DIR) boot/grub2 grub-\*.patch
+ touch $@
+
+$(GRUB2_DIR)/.configured: $(GRUB2_DIR)/.unpacked
+ (cd $(GRUB2_DIR); rm -rf config.cache; \
+ $(TARGET_CONFIGURE_OPTS) \
+ $(TARGET_CONFIGURE_ARGS) \
+ CPPFLAGS="$(GRUB2_CFLAGS)" \
+ grub_cv_i386_check_nested_functions=no \
+ ./configure $(QUIET) \
+ --target=$(GNU_TARGET_NAME) \
+ --host=$(GNU_TARGET_NAME) \
+ --build=$(GNU_HOST_NAME) \
+ --prefix=/ \
+ --mandir=/usr/man \
+ --infodir=/usr/info \
+ --disable-auto-linux-mem-opt \
+ $(DISABLE_LARGEFILE) \
+ $(GRUB2_CONFIG-y) \
+ )
+ touch $@
+
+$(GRUB2_DIR)/$(GRUB2_BINARY): $(GRUB2_DIR)/.configured
+ $(MAKE) CC=$(TARGET_CC) -C $(GRUB2_DIR)
+
+$(GRUB2_DIR)/.installed: $(GRUB2_DIR)/$(GRUB2_BINARY)
+ cp $(GRUB2_DIR)/$(GRUB2_BINARY) $(TARGET_DIR)/$(GRUB2_TARGET_BINARY)
+ test -d $(TARGET_DIR)/boot/grub2 || mkdir -p $(TARGET_DIR)/boot/grub2
+ cp $(GRUB2_DIR)/stage1/stage1 $(GRUB2_DIR)/stage2/*1_5 $(GRUB2_DIR)/stage2/stage2 $(TARGET_DIR)/boot/grub2/
+ifeq ($(BR2_TARGET_GRUB2_SPLASH),y)
+ test -f $(TARGET_DIR)/boot/grub2/$(GRUB2_SPLASHIMAGE) || \
+ cp $(GRUB2_SPLASHIMAGE) $(TARGET_DIR)/boot/grub2/
+endif
+ touch $@
+
+grub2: uclibc $(GRUB2_DIR)/.installed
+
+grub2-clean:
+ $(MAKE) DESTDIR=$(TARGET_DIR) CC=$(TARGET_CC) -C $(GRUB2_DIR) uninstall
+ -$(MAKE) -C $(GRUB2_DIR) clean
+ rm -f $(TARGET_DIR)/boot/grub2/$(GRUB2_SPLASHIMAGE) \
+ $(TARGET_DIR)/sbin/$(GRUB2_BINARY) \
+ $(TARGET_DIR)/boot/grub2/{stage{1,2},*1_5}
+
+grub2-dirclean:
+ rm -rf $(GRUB2_DIR)
+
+endif
+
+#############################################################
+#
+# Toplevel Makefile options
+#
+#############################################################
+ifeq ($(BR2_TARGET_GRUB2),y)
+TARGETS+=grub2
+endif
--- /dev/null
+config BR2_TARGET_SYSLINUX
+ bool "syslinux"
+ depends on BR2_i386
+ help
+ The syslinux bootloader for x86 systems.
+ This includes: syslinux, pxelinux, extlinux.
+
+config BR2_TARGET_PXELINUX
+ bool "pxelinux"
+ depends on BR2_i386 || BR2_x86_64
+ help
+ The pxelinux loader for x86 systems.
--- /dev/null
+--- syslinux-3.82-org/Makefile 2009-09-17 13:11:23.000000000 +0200
++++ syslinux-3.82/Makefile 2009-09-17 13:13:32.000000000 +0200
+@@ -42,7 +42,7 @@
+ mbr/mbr_c.bin mbr/altmbr_c.bin mbr/gptmbr_c.bin \
+ mbr/mbr_f.bin mbr/altmbr_f.bin mbr/gptmbr_f.bin \
+ core/pxelinux.0 core/isolinux.bin core/isolinux-debug.bin \
+- gpxe/gpxelinux.0 dos/syslinux.com win32/syslinux.exe \
++ gpxe/gpxelinux.0 dos/syslinux.com \
+ $(MODULES)
+
+ # BSUBDIRs build the on-target binary components.
--- /dev/null
+SYSLINUX_SUPPORTED_ARCH=n
+ifeq ($(ARCH),i386)
+SYSLINUX_SUPPORTED_ARCH=y
+endif
+ifeq ($(ARCH),i486)
+SYSLINUX_SUPPORTED_ARCH=y
+endif
+ifeq ($(ARCH),i586)
+SYSLINUX_SUPPORTED_ARCH=y
+endif
+ifeq ($(ARCH),i686)
+SYSLINUX_SUPPORTED_ARCH=y
+endif
+ifeq ($(ARCH),x86_64)
+SYSLINUX_SUPPORTED_ARCH=y
+endif
+ifeq ($(SYSLINUX_SUPPORTED_ARCH),y)
+
+#############################################################
+#
+# syslinux to make target msdos/iso9660 filesystems bootable
+#
+#############################################################
+
+SYSLINUX_VERSION:=3.82
+SYSLINUX_DIR=$(BUILD_DIR)/syslinux-$(SYSLINUX_VERSION)
+SYSLINUX_DIR2=$(TOOLCHAIN_DIR)/syslinux-$(SYSLINUX_VERSION)
+SYSLINUX_SOURCE=syslinux-$(SYSLINUX_VERSION).tar.bz2
+SYSLINUX_CAT:=$(BZCAT)
+SYSLINUX_SITE=$(BR2_KERNEL_MIRROR)/linux/utils/boot/syslinux/
+SYSLINUX_BIN=$(SYSLINUX_DIR2)/mtools/syslinux
+
+
+$(DL_DIR)/$(SYSLINUX_SOURCE):
+ $(call DOWNLOAD,$(SYSLINUX_SITE),$(SYSLINUX_SOURCE))
+
+syslinux-source: $(DL_DIR)/$(SYSLINUX_SOURCE)
+
+$(SYSLINUX_DIR)/Makefile: $(DL_DIR)/$(SYSLINUX_SOURCE) $(SYSLINUX_PATCH)
+ $(SYSLINUX_CAT) $(DL_DIR)/$(SYSLINUX_SOURCE) | tar -C $(BUILD_DIR) $(TAR_OPTIONS) -
+ toolchain/patch-kernel.sh $(SYSLINUX_DIR) boot/syslinux/ \*.patch
+ touch -c $@
+
+$(SYSLINUX_DIR)/isolinux.bin $(SYSLINUX_DIR)/pxelinux.bin: $(SYSLINUX_DIR)/Makefile
+ $(MAKE) CC="$(HOSTCC)" AR="$(HOSTAR)" -C $(SYSLINUX_DIR)
+ touch -c $@
+
+syslinux: $(SYSLINUX_DIR)/isolinux.bin
+pxelinux: $(SYSLINUX_DIR)/pxelinux.bin
+
+pxelinux-clean syslinux-clean:
+ rm -f $(SYSLINUX_DIR)/isolinux.bin $(SYSLINUX_DIR)/pxelinux.bin
+ -$(MAKE) -C $(SYSLINUX_DIR) clean
+
+pxelinux-dirclean syslinux-dirclean:
+ rm -rf $(SYSLINUX_DIR)
+
+endif
+
+#############################################################
+#
+# Toplevel Makefile options
+#
+#############################################################
+ifeq ($(BR2_TARGET_SYSLINUX),y)
+TARGETS+=syslinux
+endif
+ifeq ($(BR2_TARGET_PXELINUX),y)
+TARGETS+=pxelinux
+endif
--- /dev/null
+menuconfig BR2_TARGET_UBOOT
+ bool "Das U-Boot Boot Monitor"
+ help
+ Build "Das U-Boot" Boot Monitor
+
+if BR2_TARGET_UBOOT
+config BR2_TARGET_UBOOT_BOARDNAME
+ string "board name"
+ default "$(BOARD_NAME)"
+ help
+ One of U-Boot supported boards to be built.
+ This will be suffixed with _config to meet U-Boot standard naming.
+
+choice
+ prompt "U-Boot Version"
+ default BR2_TARGET_UBOOT_2010_03
+ help
+ Select the specific U-Boot version you want to use
+
+config BR2_TARGET_UBOOT_2010_03
+ bool "u-boot-2010.03"
+
+config BR2_TARGET_UBOOT_2009_11
+ bool "u-boot-2009.11"
+
+config BR2_TARGET_UBOOT_2009_08
+ bool "u-boot-2009.08"
+
+config BR2_TARGET_UBOOT_2009_06
+ bool "u-boot-2009.06"
+ depends on BR2_DEPRECATED
+
+config BR2_TARGET_UBOOT_2009_03
+ bool "u-boot-2009.03"
+ depends on BR2_DEPRECATED
+
+config BR2_TARGET_UBOOT_2009_01
+ bool "u-boot-2009.01"
+ depends on BR2_DEPRECATED
+
+config BR2_TARGET_UBOOT_2008_10
+ bool "u-boot-2008.10"
+ depends on BR2_DEPRECATED
+
+config BR2_TARGET_UBOOT_1_2_0_ATMEL
+ bool "u-boot-1.2.0-atmel"
+ depends on BR2_TARGET_AT91
+
+endchoice
+
+config BR2_UBOOT_VERSION
+ string
+ default "2010.03" if BR2_TARGET_UBOOT_2010_03
+ default "2009.11" if BR2_TARGET_UBOOT_2009_11
+ default "2009.08" if BR2_TARGET_UBOOT_2009_08
+ default "2009.06" if BR2_TARGET_UBOOT_2009_06
+ default "2009.03" if BR2_TARGET_UBOOT_2009_03
+ default "2009.01" if BR2_TARGET_UBOOT_2009_01
+ default "2008.10" if BR2_TARGET_UBOOT_2008_10
+ default "1.2.0-atmel" if BR2_TARGET_UBOOT_1_2_0_ATMEL
+
+config BR2_U_BOOT_SITE
+ string
+ default "$(BR2_ATMEL_MIRROR)" if BR2_TARGET_UBOOT_1_2_0_ATMEL
+ default "ftp://ftp.denx.de/pub/u-boot"
+
+source "target/device/Config.in.u-boot"
+
+config BR2_TARGET_UBOOT_CUSTOM_PATCH
+ string "custom patch"
+ help
+ If your board requires a custom patch, add the path to the file here.
+ Most users may leave this empty
+
+choice
+ prompt "Bootsource"
+ depends on BR2_BOOTSOURCE
+ default BR2_TARGET_UBOOT_BOOTSOURCE_DATAFLASHCARD
+
+ config BR2_TARGET_UBOOT_BOOTSOURCE_DATAFLASHCARD
+ bool "Boot from dataflashcard"
+ depends on BR2_BOOTSOURCE_DATAFLASHCARD
+
+ config BR2_TARGET_UBOOT_BOOTSOURCE_DATAFLASH
+ bool "Boot from dataflash"
+ depends on BR2_BOOTSOURCE_DATAFLASH
+
+ config BR2_TARGET_UBOOT_BOOTSOURCE_NANDFLASH
+ bool "Boot from a NAND flash"
+ depends on BR2_BOOTSOURCE_NANDFLASH
+
+ config BR2_TARGET_UBOOT_BOOTSOURCE_FLASH
+ bool "Boot from a parallell flash"
+ depends on BR2_BOOTSOURCE_FLASH
+
+ config BR2_TARGET_UBOOT_BOOTSOURCE_SDCARD
+ bool "Boot from an SD-Card"
+ depends on BR2_BOOTSOURCE_SDCARD
+
+ config BR2_TARGET_UBOOT_BOOTSOURCE_EEPROM
+ bool "Boot from a serial EEPROM (Not yet supported)"
+ depends on BR2_BOOTSOURCE_EEPROM
+
+endchoice
+
+config BR2_TARGET_UBOOT_BOOTSOURCE
+ string
+ depends on BR2_BOOTSOURCE
+ default "dataflash" if BR2_TARGET_UBOOT_BOOTSOURCE_DATAFLASHCARD
+ default "dataflash" if BR2_TARGET_UBOOT_BOOTSOURCE_DATAFLASH
+ default "nandflash" if BR2_TARGET_UBOOT_BOOTSOURCE_NANDFLASH
+ default "flash" if BR2_TARGET_UBOOT_BOOTSOURCE_FLASH
+ default "sdcard" if BR2_TARGET_UBOOT_BOOTSOURCE_SDCARD
+ default "eeprom" if BR2_TARGET_UBOOT_BOOTSOURCE_EEPROM
+
+config BR2_TARGET_UBOOT_SILENT
+ bool "silent console"
+ help
+ If the option has been enabled, the output can be
+ silenced by setting the environment variable "silent".
+
+config BR2_TARGET_UBOOT_TOOL_MKIMAGE
+ bool "mkimage tool in target"
+ help
+ Install mkimage tool in target.
+
+config BR2_TARGET_UBOOT_TOOL_ENV
+ bool "fw_printenv tool in target"
+ help
+ Install fw_printenv / fw_setenv tools in target.
+
+menuconfig BR2_TARGET_UBOOT_DEFAULT_ENV
+ bool "Generate a default environment"
+ help
+ Will generate variables for factory default command
+ and autoscript.
+
+if BR2_TARGET_UBOOT_DEFAULT_ENV
+choice
+ prompt "SDRAM Memory size"
+ default BR2_TARGET_UBOOT_SDRAM_SIZE_64M
+ help
+ Size of the onboard SDRAM
+
+config BR2_TARGET_UBOOT_SDRAM_SIZE_256MB
+ bool "256 MB"
+
+config BR2_TARGET_UBOOT_SDRAM_SIZE_128MB
+ bool "128 MB"
+
+config BR2_TARGET_UBOOT_SDRAM_SIZE_64MB
+ bool "64 MB"
+
+config BR2_TARGET_UBOOT_SDRAM_SIZE_32MB
+ bool "32 MB"
+
+config BR2_TARGET_UBOOT_SDRAM_SIZE_16MB
+ bool "16 MB"
+
+config BR2_TARGET_UBOOT_SDRAM_SIZE_8MB
+ bool "8 MB"
+
+endchoice
+
+config BR2_TARGET_UBOOT_MEMORY_SIZE
+ string
+ default "256M" if BR2_TARGET_UBOOT_SDRAM_SIZE_256MB
+ default "128M" if BR2_TARGET_UBOOT_SDRAM_SIZE_128MB
+ default "64M" if BR2_TARGET_UBOOT_SDRAM_SIZE_64MB
+ default "32M" if BR2_TARGET_UBOOT_SDRAM_SIZE_32MB
+ default "16M" if BR2_TARGET_UBOOT_SDRAM_SIZE_16MB
+ default "8M" if BR2_TARGET_UBOOT_SDRAM_SIZE_8MB
+
+choice
+ prompt "Kernel Size"
+ default BR2_TARGET_UBOOT_KERNEL_SIZE_2_00MB
+
+config BR2_TARGET_UBOOT_KERNEL_SIZE_1_25MB
+ bool "Kernel size is less than 1.25 MB"
+
+config BR2_TARGET_UBOOT_KERNEL_SIZE_1_50MB
+ bool "Kernel size is less than 1.50 MB"
+
+config BR2_TARGET_UBOOT_KERNEL_SIZE_1_75MB
+ bool "Kernel size is less than 1.75 MB"
+
+config BR2_TARGET_UBOOT_KERNEL_SIZE_2_00MB
+ bool "Kernel size is less than 2.00 MB"
+
+config BR2_TARGET_UBOOT_KERNEL_SIZE_2_25MB
+ bool "Kernel size is less than 2.25 MB"
+
+config BR2_TARGET_UBOOT_KERNEL_SIZE_2_50MB
+ bool "Kernel size is less than 2.50 MB"
+
+endchoice
+
+choice
+ prompt "Dataflash Size"
+ depends on BR2_TARGET_UBOOT_BOOTSOURCE_DATAFLASHCARD || BR2_TARGET_UBOOT_BOOTSOURCE_DATAFLASH
+ default BR2_TARGET_UBOOT_DATAFLASH_SIZE_2_00MB
+
+config BR2_TARGET_UBOOT_DATAFLASH_SIZE_8MB
+ bool "Dataflash size is 8 MB"
+
+config BR2_TARGET_UBOOT_DATAFLASH_SIZE_4MB
+ bool "Dataflash size is 4 MB"
+
+config BR2_TARGET_UBOOT_DATAFLASH_SIZE_2MB
+ bool "Dataflash size is 2 MB"
+
+config BR2_TARGET_UBOOT_DATAFLASH_SIZE_1MB
+ bool "Dataflash size is 1 MB"
+
+config BR2_TARGET_UBOOT_DATAFLASH_SIZE_0_50MB
+ bool "Dataflash size is 0.5 MB"
+
+config BR2_TARGET_UBOOT_DATAFLASH_SIZE_0_25MB
+ bool "Dataflash size is 0.25 MB"
+
+endchoice
+
+config BR2_TARGET_UBOOT_DATAFLASH_SIZE
+ string
+ depends on BR2_TARGET_UBOOT_BOOTSOURCE_DATAFLASHCARD || BR2_TARGET_UBOOT_BOOTSOURCE_DATAFLASH
+ default "8M" if BR2_TARGET_DATAFLASH_SIZE_8MB
+ default "4M" if BR2_TARGET_DATAFLASH_SIZE_4MB
+ default "2M" if BR2_TARGET_DATAFLASH_SIZE_2MB
+ default "1M" if BR2_TARGET_DATAFLASH_SIZE_1MB
+ default "0.5M" if BR2_TARGET_DATAFLASH_SIZE_0_50MB
+ default "0.25M" if BR2_TARGET_DATAFLASH_SIZE_0_25MB
+
+config BR2_TARGET_UBOOT_END_OF_FLASH
+ string
+ depends on BR2_TARGET_UBOOT_BOOTSOURCE_DATAFLASHCARD || BR2_TARGET_UBOOT_BOOTSOURCE_DATAFLASH
+ default "C083FFFF" if BR2_TARGET_UBOOT_DATAFLASH_SIZE_8MB
+ default "C041FFFF" if BR2_TARGET_UBOOT_DATAFLASH_SIZE_4MB
+ default "C020FFFF" if BR2_TARGET_UBOOT_DATAFLASH_SIZE_2MB
+ default "C0107FFF" if BR2_TARGET_UBOOT_DATAFLASH_SIZE_1MB
+ default "C0083FFF" if BR2_TARGET_UBOOT_DATAFLASH_SIZE_0_50MB
+ default "C0041FFF" if BR2_TARGET_UBOOT_DATAFLASH_SIZE_0_25MB
+ help
+
+config BR2_TARGET_UBOOT_KERNEL_START
+ string "Kernel SDRAM address"
+ default "21000000"
+ help
+ Kernel is loaded to this address in SDRAM
+
+config BR2_TARGET_UBOOT_KERNEL_LOCATION
+ string "Kernel flash address"
+ depends on BR2_TARGET_UBOOT_BOOTSOURCE_DATAFLASHCARD || \
+ BR2_TARGET_UBOOT_BOOTSOURCE_DATAFLASH
+ default "C0042000" if BR2_TARGET_UBOOT_BOOTSOURCE_DATAFLASHCARD || BR2_TARGET_UBOOT_BOOTSOURCE_DATAFLASH
+ default ""
+ help
+ Kernel location in dataflash
+
+config BR2_TARGET_UBOOT_FILESYSTEM_START
+ string
+ default "2114A000" if BR2_TARGET_UBOOT_KERNEL_SIZE_1_25MB
+ default "2118C000" if BR2_TARGET_UBOOT_KERNEL_SIZE_1_50MB
+ default "211CE000" if BR2_TARGET_UBOOT_KERNEL_SIZE_1_75MB
+ default "21210000" if BR2_TARGET_UBOOT_KERNEL_SIZE_2_00MB
+ default "21252000" if BR2_TARGET_UBOOT_KERNEL_SIZE_2_25MB
+ default "21294000" if BR2_TARGET_UBOOT_KERNEL_SIZE_2_50MB
+ help
+ Kernel is loaded to this SDRAM address
+ Assumes SDRAM starts at 20000000
+ Will need to be updated if the SDRAM is located elsewhere
+
+config BR2_TARGET_UBOOT_FILESYSTEM_LOCATION
+ string
+ depends on BR2_TARGET_UBOOT_BOOTSOURCE_DATAFLASHCARD || \
+ BR2_TARGET_UBOOT_BOOTSOURCE_DATAFLASH
+ default "C018C000" if BR2_TARGET_UBOOT_KERNEL_SIZE_1_25MB
+ default "C01CE000" if BR2_TARGET_UBOOT_KERNEL_SIZE_1_50MB
+ default "C0210000" if BR2_TARGET_UBOOT_KERNEL_SIZE_1_75MB
+ default "C0252000" if BR2_TARGET_UBOOT_KERNEL_SIZE_2_00MB
+ default "C0294000" if BR2_TARGET_UBOOT_KERNEL_SIZE_2_25MB
+ default "C02D6000" if BR2_TARGET_UBOOT_KERNEL_SIZE_2_50MB
+ help
+ Determine location for File System in Dataflash
+ This needs to be updated for other memory technologies
+
+config BR2_TARGET_UBOOT_FILESYSTEM_SIZE
+ string "File System Size"
+ default "6000000"
+ help
+
+menuconfig BR2_TARGET_UBOOT_NETWORK
+ bool "Network Settings"
+ default y
+ help
+ Network settings for U-boot
+
+if BR2_TARGET_UBOOT_NETWORK
+
+config BR2_TARGET_UBOOT_SERVERIP
+ string "server ip"
+ default "10.175.196.221"
+ help
+ TFTP server ip address
+
+config BR2_TARGET_UBOOT_IPADDR
+ string "ip address"
+ default "10.175.196.18"
+ help
+ Target ip address
+
+config BR2_TARGET_UBOOT_GATEWAY
+ string "gateway ip"
+ default "10.175.196.1"
+ help
+ Gateway ip address
+
+config BR2_TARGET_UBOOT_NETMASK
+ string "netmask"
+ default "255.255.255.0"
+ help
+ Network Mask
+
+config BR2_TARGET_UBOOT_ETHADDR
+ string "ethernet address"
+ default "04:25:fe:ed:00:18"
+ help
+ Target MAC address for the ethernet interface.
+ This should be changed for production units
+
+config BR2_TARGET_UBOOT_ETH1ADDR
+ string "ethernet 2 address"
+ help
+ Target MAC address for the second ethernet interface.
+
+endif # BR2_TARGET_UBOOT_NETWORK
+
+endif # BR2_TARGET_UBOOT_DEFAULT_ENV
+
+endif # BR2_TARGET_UBOOT
+
+config BR2_BOOTSOURCE_DATAFLASHCARD
+ bool
+ help
+ Allow use of a dataflashcard as a boot source
+
+config BR2_BOOTSOURCE_DATAFLASH
+ bool
+ help
+ Allow use of a dataflash as a boot source
+
+config BR2_BOOTSOURCE_NANDFLASH
+ bool
+ help
+ Allow use of a NAND flash as a boot source
+
+config BR2_BOOTSOURCE_FLASH
+ bool
+ help
+ Allow use of a flash RAM as a boot source
+
+config BR2_BOOTSOURCE_SDCARD
+ bool
+ help
+ Allow use of an SD-card as a boot source
+
+config BR2_BOOTSOURCE_EEPROM
+ bool
+ help
+ Allow use of a serial eeprom as a boot source
+
+config BR2_BOOTSOURCE
+ bool
+ default y if BR2_BOOTSOURCE_DATAFLASHCARD
+ default y if BR2_BOOTSOURCE_DATAFLASH
+ default y if BR2_BOOTSOURCE_NANDFLASH
+ default y if BR2_BOOTSOURCE_FLASH
+ default y if BR2_BOOTSOURCE_SDCARD
+ default y if BR2_BOOTSOURCE_EEPROM
--- /dev/null
+#############################################################
+#
+# U-Boot
+#
+#############################################################
+U_BOOT_VERSION:=$(call qstrip,$(BR2_UBOOT_VERSION))
+
+U_BOOT_SOURCE:=u-boot-$(U_BOOT_VERSION).tar.bz2
+
+U_BOOT_SITE:=$(call qstrip,$(BR2_U_BOOT_SITE))
+U_BOOT_DIR:=$(BUILD_DIR)/u-boot-$(U_BOOT_VERSION)
+U_BOOT_PATCH_DIR:=$(BUILD_DIR)/u-boot-$(U_BOOT_VERSION)-patches
+U_BOOT_CAT:=$(BZCAT)
+U_BOOT_BIN:=u-boot.bin
+U_BOOT_TARGET_BIN:=u-boot-$(U_BOOT_VERSION)-$(DATE).bin
+
+U_BOOT_TOOLS:=$(HOST_DIR)/usr/bin/mkimage
+MKIMAGE:=$(U_BOOT_TOOLS)
+U_BOOT_AUTOSCRIPT=$(BINARIES_DIR)/autoscript
+
+U_BOOT_TARGETS:=$(BINARIES_DIR)/$(U_BOOT_BIN) $(U_BOOT_TOOLS)
+
+ifeq ($(call qstrip,$(BR2_TARGET_UBOOT_DEFAULT_ENV)),y)
+U_BOOT_TARGETS += u-boot-autoscript
+endif
+
+TARGET_UBOOT_IPADDR:=$(call qstrip,$(BR2_TARGET_UBOOT_IPADDR))
+TARGET_UBOOT_SERVERIP:=$(call qstrip,$(BR2_TARGET_UBOOT_SERVERIP))
+TARGET_UBOOT_GATEWAY:=$(call qstrip,$(BR2_TARGET_UBOOT_GATEWAY))
+TARGET_UBOOT_NETMASK:=$(call qstrip,$(BR2_TARGET_UBOOT_NETMASK))
+TARGET_UBOOT_ETHADDR:=$(call qstrip,$(BR2_TARGET_UBOOT_ETHADDR))
+
+# u-boot still uses arch=ppc for powerpc
+U_BOOT_ARCH=$(KERNEL_ARCH:powerpc=ppc)
+ifeq ($(UBOOT_BOARD_NAME),)
+UBOOT_BOARD_NAME:=$(call qstrip,$(BR2_TARGET_UBOOT_BOARDNAME))
+endif
+
+U_BOOT_INC_CONF_FILE:=$(U_BOOT_DIR)/include/config.h
+
+U_BOOT_TARGET_TOOLS:=
+ifeq ($(BR2_TARGET_UBOOT_TOOL_MKIMAGE),y)
+U_BOOT_TARGETS+=$(TARGET_DIR)/usr/bin/mkimage
+endif
+ifeq ($(BR2_TARGET_UBOOT_TOOL_ENV),y)
+U_BOOT_TARGETS+=$(TARGET_DIR)/usr/sbin/fw_printenv
+endif
+
+U_BOOT_CONFIGURE_OPTS :=
+
+ifneq ($(BR2_TARGET_UBOOT_1_2_0_ATMEL),)
+U_BOOT_CONFIGURE_OPTS += CONFIG_NOSOFTFLOAT=1
+endif
+
+# Define a helper function
+define insert_define
+@echo "#ifdef $(strip $(1))" >> $(U_BOOT_INC_CONF_FILE)
+@echo "#undef $(strip $(1))" >> $(U_BOOT_INC_CONF_FILE)
+@echo "#endif" >> $(U_BOOT_INC_CONF_FILE)
+@echo '#define $(strip $(1)) $(call qstrip,$(2))' >> $(U_BOOT_INC_CONF_FILE)
+endef
+
+$(DL_DIR)/$(U_BOOT_SOURCE):
+ $(call DOWNLOAD,$(U_BOOT_SITE),$(U_BOOT_SOURCE))
+
+$(U_BOOT_DIR)/.unpacked: $(DL_DIR)/$(U_BOOT_SOURCE)
+ $(U_BOOT_CAT) $(DL_DIR)/$(U_BOOT_SOURCE) \
+ | tar -C $(BUILD_DIR) $(TAR_OPTIONS) -
+ mkdir -p $(U_BOOT_DIR)
+ touch $@
+
+$(U_BOOT_DIR)/.patched: $(U_BOOT_DIR)/.unpacked
+ toolchain/patch-kernel.sh $(U_BOOT_DIR) boot/u-boot \
+ u-boot-$(U_BOOT_VERSION)-\*.patch \
+ u-boot-$(U_BOOT_VERSION)-\*.patch.$(ARCH)
+ifneq ($(strip $(U_BOOT_ARCH_PATCH_DIR)),)
+ toolchain/patch-kernel.sh $(U_BOOT_DIR) $(U_BOOT_ARCH_PATCH_DIR) \*.patch
+endif
+ifneq ($(strip $(BR2_TARGET_UBOOT_CUSTOM_PATCH)),"")
+ @mkdir -p $(U_BOOT_PATCH_DIR)
+ cp -dpr $(BR2_TARGET_UBOOT_CUSTOM_PATCH) $(U_BOOT_PATCH_DIR)
+ toolchain/patch-kernel.sh $(U_BOOT_DIR) $(U_BOOT_PATCH_DIR) \*.patch
+endif
+ touch $@
+
+$(U_BOOT_DIR)/.configured: $(U_BOOT_DIR)/.patched
+ $(TARGET_CONFIGURE_OPTS) \
+ CFLAGS="$(TARGET_CFLAGS)" \
+ LDFLAGS="$(TARGET_LDFLAGS)" \
+ $(U_BOOT_CONFIGURE_OPTS) \
+ $(MAKE) -C $(U_BOOT_DIR) \
+ $(UBOOT_BOARD_NAME)_config
+ touch $@
+
+$(U_BOOT_DIR)/.header_modified: $(U_BOOT_DIR)/.configured
+ # Modify configuration header in $(U_BOOT_INC_CONF_FILE)
+ifdef BR2_TARGET_UBOOT_DEFAULT_ENV
+ @echo >> $(U_BOOT_INC_CONF_FILE)
+ @echo "/* Add a wrapper around the values Buildroot sets. */" >> $(U_BOOT_INC_CONF_FILE)
+ @echo "#ifndef __BR2_ADDED_CONFIG_H" >> $(U_BOOT_INC_CONF_FILE)
+ @echo "#define __BR2_ADDED_CONFIG_H" >> $(U_BOOT_INC_CONF_FILE)
+ $(call insert_define, DATE, $(DATE))
+ $(call insert_define, CONFIG_LOAD_SCRIPTS, 1)
+endif # BR2_TARGET_UBOOT_DEFAULT_ENV
+ifdef BR2_TARGET_UBOOT_NETWORK
+ifneq ($(strip $(BR2_TARGET_UBOOT_IPADDR)),"")
+ $(call insert_define, CONFIG_IPADDR, $(BR2_TARGET_UBOOT_IPADDR))
+ifneq ($(strip $(BR2_TARGET_UBOOT_GATEWAY)),"")
+ $(call insert_define, CONFIG_GATEWAYIP, $(BR2_TARGET_UBOOT_GATEWAY))
+endif
+ifneq ($(strip $(BR2_TARGET_UBOOT_NETMASK)),"")
+ $(call insert_define, CONFIG_NETMASK, $(BR2_TARGET_UBOOT_NETMASK))
+endif
+endif # end BR2_TARGET_U_BOOT_IPADDR
+ifneq ($(strip $(BR2_TARGET_UBOOT_SERVERIP)),"")
+ $(call insert_define, CONFIG_SERVERIP, $(BR2_TARGET_UBOOT_SERVERIP))
+endif
+ifneq ($(strip $(BR2_TARGET_UBOOT_ETHADDR)),"")
+ $(call insert_define, CONFIG_ETHADDR, $(BR2_TARGET_UBOOT_ETHADDR))
+endif
+ifneq ($(strip $(BR2_TARGET_UBOOT_ETH1ADDR)),)
+ifneq ($(strip $(BR2_TARGET_UBOOT_ETH1ADDR)),"")
+ $(call insert_define, CONFIG_ETH1ADDR, $(BR2_TARGET_UBOOT_ETH1ADDR))
+endif
+endif
+endif # BR2_TARGET_UBOOT_NETWORK
+ifeq ($(BR2_TARGET_UBOOT_SILENT),y)
+ $(call insert_define, CONFIG_SILENT_CONSOLE,)
+endif
+ifdef BR2_TARGET_UBOOT_DEFAULT_ENV
+ifneq ($(strip $(BR2_TARGET_UBOOT_KERNEL_START)),"")
+ $(call insert_define, KERNEL_START, $(BR2_TARGET_UBOOT_KERNEL_START))
+endif
+ifneq ($(strip $(BR2_TARGET_UBOOT_KERNEL_LOCATION)),"")
+ $(call insert_define, KERNEL_LOCATION, $(BR2_TARGET_UBOOT_KERNEL_LOCATION))
+endif
+ifneq ($(strip $(BR2_TARGET_UBOOT_FILESYSTEM_START)),"")
+ $(call insert_define, FILESYSTEM_START, $(BR2_TARGET_UBOOT_FILESYSTEM_START))
+endif
+ifneq ($(strip $(BR2_TARGET_UBOOT_FILESYSTEM_LOCATION)),"")
+ $(call insert_define, FILESYSTEM_LOCATION, $(BR2_TARGET_UBOOT_FILESYSTEM_LOCATION))
+endif
+ifneq ($(strip $(BR2_TARGET_UBOOT_FILESYSTEM_SIZE)),"")
+ $(call insert_define, FILESYSTEM_SIZE, $(BR2_TARGET_UBOOT_FILESYSTEM_SIZE))
+endif
+ifneq ($(strip $(BR2_TARGET_UBOOT_END_OF_FLASH)),"")
+ $(call insert_define, END_OF_FLASH, $(BR2_TARGET_UBOOT_END_OF_FLASH))
+endif
+ifneq ($(strip $(BR2_TARGET_UBOOT_MEMORY_SIZE)),"")
+ $(call insert_define, MEMORY_SIZE, $(BR2_TARGET_UBOOT_MEMORY_SIZE))
+endif
+ @echo "#endif /* __BR2_ADDED_CONFIG_H */" >> $(U_BOOT_INC_CONF_FILE)
+endif # BR2_TARGET_UBOOT_DEFAULT_ENV
+ touch $@
+
+$(U_BOOT_DIR)/$(U_BOOT_BIN): $(U_BOOT_DIR)/.header_modified
+ $(TARGET_CONFIGURE_OPTS) \
+ CFLAGS="$(TARGET_CFLAGS)" \
+ LDFLAGS="$(TARGET_LDFLAGS)" \
+ $(U_BOOT_CONFIGURE_OPTS) \
+ $(MAKE) CROSS_COMPILE="$(TARGET_CROSS)" ARCH=$(U_BOOT_ARCH) \
+ -C $(U_BOOT_DIR)
+
+$(BINARIES_DIR)/$(U_BOOT_BIN): $(U_BOOT_DIR)/$(U_BOOT_BIN)
+ rm -f $(BINARIES_DIR)/$(U_BOOT_BIN)
+ rm -f $(BINARIES_DIR)/$(U_BOOT_TARGET_BIN)
+ cp -dpf $(U_BOOT_DIR)/$(U_BOOT_BIN) $(BINARIES_DIR)/$(U_BOOT_TARGET_BIN)
+ (cd $(BINARIES_DIR); ln -s $(U_BOOT_TARGET_BIN) $(U_BOOT_BIN))
+
+$(U_BOOT_TOOLS): $(U_BOOT_DIR)/$(U_BOOT_BIN)
+ mkdir -p $(@D)
+ cp -dpf $(U_BOOT_DIR)/tools/mkimage $@
+
+$(TARGET_DIR)/usr/bin/mkimage: $(U_BOOT_DIR)/$(U_BOOT_BIN)
+ mkdir -p $(@D)
+ $(TARGET_CC) -I$(U_BOOT_DIR)/include -I$(U_BOOT_DIR)/tools \
+ -DUSE_HOSTCC -o $@ \
+ $(U_BOOT_DIR)/common/image.c \
+ $(wildcard $(addprefix $(U_BOOT_DIR)/tools/,default_image.c \
+ fit_image.c imximage.c kwbimage.c mkimage.c)) \
+ $(addprefix $(U_BOOT_DIR)/lib_generic/,crc32.c md5.c sha1.c) \
+ $(U_BOOT_DIR)/tools/os_support.c \
+ $(U_BOOT_DIR)/libfdt/fdt*.c
+
+ $(STRIPCMD) $(STRIP_STRIP_UNNEEDED) $@
+
+$(TARGET_DIR)/usr/sbin/fw_printenv: $(U_BOOT_DIR)/$(U_BOOT_BIN)
+ mkdir -p $(@D)
+ $(TARGET_CC) -I$(U_BOOT_DIR)/include -I$(LINUX_HEADERS_DIR)/include \
+ -DUSE_HOSTCC -o $@ \
+ $(U_BOOT_DIR)/tools/env/*.c $(U_BOOT_DIR)/lib_generic/crc32.c
+ $(STRIPCMD) $(STRIP_STRIP_UNNEEDED) $@
+ ln -sf fw_printenv $(TARGET_DIR)/usr/sbin/fw_setenv
+
+u-boot: $(U_BOOT_TARGETS)
+
+u-boot-autoscript: $(U_BOOT_AUTOSCRIPT).img
+
+u-boot-clean:
+ -$(MAKE) -C $(U_BOOT_DIR) clean
+ rm -f $(U_BOOT_TOOLS) $(U_BOOT_TARGET_TOOLS)
+
+u-boot-dirclean:
+ rm -rf $(U_BOOT_DIR)
+
+u-boot-source: $(DL_DIR)/$(U_BOOT_SOURCE)
+
+u-boot-unpacked: $(U_BOOT_DIR)/.patched
+
+u-boot-configured: $(U_BOOT_DIR)/.header_modified
+
+#############################################################
+#
+# Generate an autoscript with the configration items
+#
+#############################################################
+
+$(U_BOOT_AUTOSCRIPT): .config
+ rm -f $(U_BOOT_AUTOSCRIPT)
+ifneq ($(TARGET_UBOOT_IPADDR),)
+ echo setenv ipaddr $(TARGET_UBOOT_IPADDR) > $(U_BOOT_AUTOSCRIPT)
+else
+ echo TARGET_UBOOT_IPADDR="$(TARGET_UBOOT_IPADDR)"
+endif
+ifneq ($(TARGET_UBOOT_SERVERIP),)
+ echo setenv serverip $(TARGET_UBOOT_SERVERIP) >> $(U_BOOT_AUTOSCRIPT)
+endif
+ifneq ($(TARGET_UBOOT_GATEWAY),)
+ echo setenv gatewayip $(TARGET_UBOOT_GATEWAY) >> $(U_BOOT_AUTOSCRIPT)
+endif
+ifneq ($(TARGET_UBOOT_NETMASK),)
+ echo setenv netmask $(TARGET_UBOOT_NETMASK) >> $(U_BOOT_AUTOSCRIPT)
+endif
+ echo setenv linux $(LINUX26_KERNEL_NAME) >> $(U_BOOT_AUTOSCRIPT)
+ echo setenv kernel-version $(LINUX26_VERSION) >> $(U_BOOT_AUTOSCRIPT)
+ echo setenv kernel-date $(DATE) >> $(U_BOOT_AUTOSCRIPT)
+ echo setenv hostname $(TARGET_HOSTNAME) >> $(U_BOOT_AUTOSCRIPT)
+ echo setenv fs-date $(DATE) >> $(U_BOOT_AUTOSCRIPT)
+ echo setenv rd-1 rootfs.$(ARCH)-$(DATE).ext2 >> $(U_BOOT_AUTOSCRIPT)
+ echo setenv rd-2 rootfs.$(ARCH)-$(DATE).jffs2 >> $(U_BOOT_AUTOSCRIPT)
+ echo setenv rd rootfs.$(BR2_ARCH)-$(DATE).ext2 >> $(U_BOOT_AUTOSCRIPT)
+ echo setenv ver 1 >> $(U_BOOT_AUTOSCRIPT)
+ifneq ($(TARGET_UBOOT_ETHADDR),)
+ echo setenv ethaddr $(TARGET_UBOOT_ETHADDR) >> $(U_BOOT_AUTOSCRIPT)
+endif
+ echo setenv fstype ram >> $(U_BOOT_AUTOSCRIPT)
+ echo fs >> $(U_BOOT_AUTOSCRIPT)
+ echo os >> $(U_BOOT_AUTOSCRIPT)
+ echo setargs >> $(U_BOOT_AUTOSCRIPT)
+ echo saveenv >> $(U_BOOT_AUTOSCRIPT)
+
+$(U_BOOT_AUTOSCRIPT).img: $(U_BOOT_AUTOSCRIPT) $(MKIMAGE)
+ $(MKIMAGE) -A $(ARCH) \
+ -O linux \
+ -T script \
+ -C none \
+ -a 0 \
+ -e 0 \
+ -n "autoscr config" \
+ -d $(U_BOOT_AUTOSCRIPT) \
+ $(U_BOOT_AUTOSCRIPT).img
+
+
+
+#############################################################
+#
+# Toplevel Makefile options
+#
+#############################################################
+ifeq ($(BR2_TARGET_UBOOT),y)
+TARGETS+=u-boot
+
+# we NEED a board name
+ifeq ($(UBOOT_BOARD_NAME),)
+$(error NO U-Boot board name set. Check your BR2_TARGET_UBOOT_BOARDNAME setting)
+endif
+
+endif
+
+u-boot-status:
+ @echo
+ @echo U_BOOT_INC_CONF_FILE = $(U_BOOT_INC_CONF_FILE)
+ @echo BR2_UBOOT_VERSION = $(BR2_UBOOT_VERSION)
+ @echo BR2_TARGET_UBOOT_SERVERIP = $(BR2_TARGET_UBOOT_SERVERIP)
+ @echo BR2_TARGET_UBOOT_IPADDR = $(BR2_TARGET_UBOOT_IPADDR)
+ @echo BR2_TARGET_UBOOT_GATEWAY = $(BR2_TARGET_UBOOT_GATEWAY)
+ @echo BR2_TARGET_UBOOT_NETMASK = $(BR2_TARGET_UBOOT_NETMASK)
+ @echo BR2_TARGET_UBOOT_ETH0ADDR = $(BR2_TARGET_UBOOT_ETHADDR)
+ @echo BR2_TARGET_UBOOT_ETH1ADDR = $(BR2_TARGET_UBOOT_ETH1ADDR)
+ @echo BR2_TARGET_UBOOT_SILENT = $(BR2_TARGET_UBOOT_SILENT)
+ @echo UBOOT_BOARD_NAME=$(UBOOT_BOARD_NAME)
+ @exit 0
+
--- /dev/null
+diff -urN u-boot-2009.01-rc3/include/asm-avr32/io.h u-boot-avr32//include/asm-avr32/io.h
+--- u-boot-2009.01-rc3/include/asm-avr32/io.h 2009-01-18 21:37:48.000000000 +0100
++++ u-boot-avr32//include/asm-avr32/io.h 2009-01-22 07:14:38.000000000 +0100
+@@ -125,9 +125,4 @@
+
+ }
+
+-static inline phys_addr_t virt_to_phys(void * vaddr)
+-{
+- return (phys_addr_t)(vaddr);
+-}
+-
+ #endif /* __ASM_AVR32_IO_H */
--- /dev/null
+config BR2_TARGET_YABOOT
+ bool "yaboot"
+ depends on BR2_powerpc
+ help
+ The yaboot bootloader for new world powerpc systems.
--- /dev/null
+ifeq ($(ARCH),powerpc)
+
+#############################################################
+#
+# yaboot
+#
+#############################################################
+
+YABOOT_SOURCE:=yaboot-1.3.13.tar.gz
+YABOOT_SITE:=http://penguinppc.org/bootloaders/yaboot
+YABOOT_DIR:=$(BUILD_DIR)/yaboot-1.3.13
+
+$(DL_DIR)/$(YABOOT_SOURCE):
+ $(call DOWNLOAD,$(YABOOT_SITE),$(YABOOT_SOURCE))
+
+yaboot-source: $(DL_DIR)/$(YABOOT_SOURCE)
+
+$(YABOOT_DIR)/Makefile: $(DL_DIR)/$(YABOOT_SOURCE)
+ $(ZCAT) $(DL_DIR)/$(YABOOT_SOURCE) | tar -C $(BUILD_DIR) -xvf -
+ touch -c $(YABOOT_DIR)/Makefile
+
+$(YABOOT_DIR)/second/yaboot: $(YABOOT_DIR)/Makefile
+ $(MAKE) -C $(YABOOT_DIR) CROSS=$(TARGET_CROSS)
+ touch -c $(YABOOT_DIR)/second/yaboot
+
+yaboot: $(YABOOT_DIR)/second/yaboot
+
+yaboot-clean:
+ $(MAKE) -C $(YABOOT_DIR) clean
+
+yaboot-dirclean:
+ rm -rf $(YABOOT_DIR)
+
+endif
+
+#############################################################
+#
+# Toplevel Makefile options
+#
+#############################################################
+ifeq ($(BR2_TARGET_YABOOT),y)
+TARGETS+=yaboot
+endif
+
-menu "Bootloaders"
-
-source "target/x86/grub/Config.in"
-#source "target/x86/grub2/Config.in"
-source "target/x86/syslinux/Config.in"
-source "target/powerpc/yaboot/Config.in"
-source "target/u-boot/Config.in"
-endmenu
-
menu "Kernel"
choice
prompt "Kernel type"
# this eventually adds the kernel target to TARGETS:
include target/device/Makefile.in
-include target/x86/Makefile.in
-include target/powerpc/Makefile.in
include target/xtensa/Makefile.in
-ifeq ($(BR2_TARGET_UBOOT),y)
-include target/u-boot/Makefile.in
-endif
-
-include fs/common.mk
-
# kernel rules
# We already did add the kernel target to TARGETS and now just pull in the rules
# to actually build this target.
endmenu
-source "target/device/Atmel/DataFlashBoot/Config.in"
-
-source "target/device/Atmel/at91bootstrap/Config.in"
-
endif
+++ /dev/null
-config BR2_TARGET_DATAFLASHBOOT
- depends on BR2_TARGET_AT91RM9200 || BR2_TARGET_AT91SAM9261 || BR2_TARGET_AT91SAM9261S
- bool "Build Dataflashboot for selected chip"
-
-choice
- prompt "Target Architecture"
- default BR2_TARGET_DATAFLASHBOOT_AT91RM9200
- depends on BR2_TARGET_DATAFLASHBOOT
- help
- Select Chip for which Dataflash boot should be built
- Currently only AT91RM9200 Supported
-
-config BR2_TARGET_DATAFLASHBOOT_AT91RM9200
- depends on BR2_TARGET_AT91RM9200
- bool "AT91RM9200"
-config BR2_TARGET_DATAFLASHBOOT_AT91SAM9261
- depends on BR2_TARGET_AT91SAM9261
- bool "AT91SAM9261"
-config BR2_TARGET_DATAFLASHBOOT_AT91SAM9261S
- depends on BR2_TARGET_AT91SAM9261S
- bool "AT91SAM9261S"
-
-endchoice
+++ /dev/null
-#############################################################
-#
-# DataFlashBoot
-#
-#############################################################
-DATAFLASHBOOT_VERSION:=1.05
-DATAFLASHBOOT_NAME:=DataflashBoot-$(DATAFLASHBOOT_VERSION)
-ATMEL_MIRROR:=$(call qstrip,$(BR2_ATMEL_MIRROR))
-DATAFLASHBOOT_SITE:=$(ATMEL_MIRROR)
-DATAFLASHBOOT_SOURCE:=$(DATAFLASHBOOT_NAME).tar.bz2
-DATAFLASHBOOT_DIR:=$(BUILD_DIR)/$(DATAFLASHBOOT_NAME)
-DATAFLASHBOOT_BINARY:=$(DATAFLASHBOOT_NAME).bin
-
-$(DL_DIR)/$(DATAFLASHBOOT_SOURCE):
- $(call DOWNLOAD,$(DATAFLASHBOOT_SITE),$(DATAFLASHBOOT_SOURCE))
-
-$(DATAFLASHBOOT_DIR)/.unpacked: $(DL_DIR)/$(DATAFLASHBOOT_SOURCE)
- mkdir -p $(BUILD_DIR)
- ls $(DL_DIR)/$(DATAFLASHBOOT_SOURCE)
- $(BZCAT) $(DL_DIR)/$(DATAFLASHBOOT_SOURCE) | tar -C $(BUILD_DIR) $(TAR_OPTIONS) -
- touch $(DATAFLASHBOOT_DIR)/.unpacked
-
-$(DATAFLASHBOOT_DIR)/$(DATAFLASHBOOT_BINARY): $(DATAFLASHBOOT_DIR)/.unpacked
- ls $(DATAFLASHBOOT_DIR)/.unpacked
- make -C $(DATAFLASHBOOT_DIR) CROSS_COMPILE=$(TARGET_CROSS)
-
-DataflashBoot-clean:
- make -C $(DATAFLASHBOOT_DIR) clean
-
-DataflashBoot-dirclean:
- rm -rf $(DATAFLASHBOOT_DIR)
-
-dataflash: $(DATAFLASHBOOT_DIR)/$(DATAFLASHBOOT_BINARY)
- $(call COPY_FILE, $(DATAFLASHBOOT_DIR)/$(DATAFLASHBOOT_BINARY), $(TARGET_ATMEL_COPYTO), $(BOARD_NAME)-$(DATAFLASHBOOT_BINARY))
-
-
-#############################################################
-#
-# Toplevel Makefile options
-#
-#############################################################
-ifeq ($(BR2_TARGET_DATAFLASHBOOT),y)
-TARGETS+=dataflash
-endif
UBOOT_CONFIG:=$(UBOOT_BOARD_NAME)_config
UBOOT_CONFIG_FILE:=$(BOARD_PATH)/u-boot/$(UBOOT_BOARD_NAME).h
-#ifeq ($(BR2_TARGET_UBOOT_AT91),y)
-#include $(ATMEL_PATH)/u-boot/u-boot.mk
-#endif
-
-ifeq ($(BR2_TARGET_DATAFLASHBOOT),y)
-include $(ATMEL_PATH)/DataFlashBoot/DataflashBoot.mk
-endif
-
-ifeq ($(BR2_TARGET_AT91BOOTSTRAP),y)
-include $(ATMEL_PATH)/at91bootstrap/at91bootstrap.mk
-endif
-
atmel_status:
@echo BUILD_DIR=$(BUILD_DIR)
@echo BOARD_NAME=$(BOARD_NAME)
+++ /dev/null
-menuconfig BR2_TARGET_AT91BOOTSTRAP
- depends on BR2_TARGET_AT91SAM9260EK || BR2_TARGET_AT91SAM9260DFC || BR2_TARGET_AT91SAM9260PF || \
- BR2_TARGET_AT91SAM9261EK || BR2_TARGET_AT91SAM9263EK || BR2_TARGET_AT91SAM9XEEK || BR2_TARGET_AT91SAM9G20DFC
- bool "Build AT91 Bootstrap for selected chip"
-
-if BR2_TARGET_AT91BOOTSTRAP
-
-config BR2_TARGET_AT91BOOTSTRAP_BOARD
- string "Bootstrap board"
- default "$(BOARD_NAME)"
- help
- This is used to do a make <board>_config
-
-choice
- prompt "Boot Memory"
- default BR2_TARGET_AT91BOOT_DATAFLASHCARD
- depends on BR2_TARGET_AT91BOOTSTRAP
- help
- Select Chip for which AT91 bootstrap should be built
-
-config BR2_TARGET_AT91BOOT_DATAFLASH
- bool "AT45 Dataflash"
- depends on BR2_BOOTSOURCE_DATAFLASH
-
-config BR2_TARGET_AT91BOOT_DATAFLASHCARD
- bool "AT45 Dataflash Card"
- depends on BR2_BOOTSOURCE_DATAFLASHCARD
-
-config BR2_TARGET_AT91BOOT_NANDFLASH
- bool "NAND Flash"
- depends on BR2_BOOTSOURCE_NANDFLASH
-
-config BR2_TARGET_AT91BOOT_FLASH
- bool "Internal Flash or external parallel flash"
- depends on BR2_BOOTSOURCE_FLASH
-
-config BR2_TARGET_AT91BOOT_SDCARD
- bool "SD-Card"
- depends on BR2_BOOTSOURCE_SDCARD
-
-config BR2_TARGET_AT91BOOT_EEPROM
- bool "EEPROM"
- depends on BR2_BOOTSOURCE_EEPROM
-
-endchoice
-
-config BR2_TARGET_AT91BOOTSTRAP_MEMORY
- string
- depends on BR2_TARGET_AT91BOOTSTRAP
- default "dataflash" if BR2_TARGET_AT91BOOT_DATAFLASH
- default "dataflashcard" if BR2_TARGET_AT91BOOT_DATAFLASHCARD
- default "nandflash" if BR2_TARGET_AT91BOOT_NANDFLASH
- default "flash" if BR2_TARGET_AT91BOOT_FLASH
- default "sdcard" if BR2_TARGET_AT91BOOT_SDCARD
- default "eeprom" if BR2_TARGET_AT91BOOT_EEPROM
-
-config BR2_AT91BOOTSTRAP_IMG_SIZE
- string "Image Size to copy to SDRAM"
- depends on BR2_TARGET_AT91BOOTSTRAP
- default "0x32000" if BR2_TARGET_AT91BOOT_DATAFLASH
- default "0x32000" if BR2_TARGET_AT91BOOT_DATAFLASHCARD
- default "0x30000" if BR2_TARGET_AT91BOOT_NANDFLASH
- default "0x100000" if BR2_TARGET_AT91BOOT_FLASH
- default "0x30000" if BR2_TARGET_AT91BOOT_SDCARD
- default "0x30000" if BR2_TARGET_AT91BOOT_EEPROM
- help
- Select the size of your application
- AT91 Bootstrap will copy this amount from flash to SDRAM
-
-choice
- prompt "Start address of application"
- default BR2_AT91BOOTSTRAP_JUMP_TO_DEFAULT
- depends on BR2_TARGET_AT91BOOTSTRAP
- help
- Select Chip for which AT91 bootstrap should be built
- Currently supports AT91SAM9260EK, AT91SAM9261EK,
- AT91SAM9XEEK, AT91SAM9263EK
-
-
-config BR2_AT91BOOTSTRAP_JUMP_TO_DEFAULT
- bool "Copy to the default U-Boot start location in the SDRAM"
- help
- This is where you copy the U-Boot boot loader
-
-config BR2_AT91BOOTSTRAP_JUMP_TO_HIGH_SDRAM
- bool "Copy to the last Megabyte of the SDRAM"
- help
- This is where you copy a boot loader
-
-config BR2_AT91BOOTSTRAP_JUMP_TO_START_OF_SDRAM
- bool "Copy to the start of the SDRAM"
- help
- This is where you copy a standalone application
-endchoice
-
-config BR2_AT91BOOTSTRAP_JUMP_ADDR
- string
- default "0x23F00000" if BR2_AT91BOOTSTRAP_JUMP_TO_DEFAULT
- default "0x23F00000" if BR2_AT91BOOTSTRAP_JUMP_TO_HIGH_SDRAM
- default "0x20000000" if BR2_AT91BOOTSTRAP_JUMP_TO_START_OF_SDRAM
- depends on BR2_TARGET_AT91BOOTSTRAP
-
-comment "It will be copied to $(BR2_AT91BOOTSTRAP_JUMP_ADDR)"
- depends on BR2_TARGET_AT91BOOTSTRAP
-
-endif
-
-
-
+++ /dev/null
-#############################################################
-#
-# at91bootstrap
-#
-#############################################################
-AT91BOOTSTRAP_VERSION:=2.10
-AT91BOOTSTRAP_PATCH_LEVEL:=
-AT91BOOTSTRAP_PATCHED_VERSION:=$(AT91BOOTSTRAP_VERSION)$(AT91BOOTSTRAP_PATCH_LEVEL)
-AT91BOOTSTRAP_NAME:=at91bootstrap-$(AT91BOOTSTRAP_VERSION)
-ATMEL_MIRROR:=$(call qstrip,$(BR2_ATMEL_MIRROR))
-AT91BOOTSTRAP_SITE:=$(ATMEL_MIRROR)
-AT91BOOTSTRAP_SOURCE:=$(AT91BOOTSTRAP_NAME).tar.bz2
-AT91BOOTSTRAP_DIR:=$(BUILD_DIR)/$(AT91BOOTSTRAP_NAME)
-AT91BOOTSTRAP:=$(call qstrip,$(BR2_AT91BOOTSTRAP))
-AT91BOOTSTRAP_ZCAT:=$(BZCAT)
-
-AT91BOOTSTRAP_BOARD:=$(call qstrip,$(BR2_TARGET_AT91BOOTSTRAP_BOARD))
-
-AT91BOOTSTRAP_MEMORY:=$(call qstrip,$(BR2_TARGET_AT91BOOTSTRAP_MEMORY))
-
-AT91BOOTSTRAP_BINARY:=$(BOARD_NAME)-$(AT91BOOTSTRAP_MEMORY)boot-$(AT91BOOTSTRAP_PATCHED_VERSION).bin
-
-AT91BOOTSTRAP_TARGET:=$(AT91BOOTSTRAP_DIR)/binaries/$(AT91BOOTSTRAP_BINARY)
-
-AT91BOOTSTRAP_JUMP_ADDR:=$(call qstrip,$(BR2_AT91BOOTSTRAP_JUMP_ADDR))
-AT91BOOTSTRAP_IMG_SIZE:=$(call qstrip,$(BR2_AT91BOOTSTRAP_IMG_SIZE))
-
-AT91_CUSTOM_FLAGS:=
-ifneq ($(AT91BOOTSTRAP_JUMP_ADDR),)
-AT91_CUSTOM_FLAGS+=-DJUMP_ADDR=$(AT91BOOTSTRAP_JUMP_ADDR)
-endif
-ifneq ($(AT91BOOTSTRAP_IMG_SIZE),)
-AT91_CUSTOM_FLAGS+=-DIMG_SIZE=$(AT91BOOTSTRAP_IMG_SIZE)
-endif
-
-$(DL_DIR)/$(AT91BOOTSTRAP_SOURCE):
- $(call DOWNLOAD,$(AT91BOOTSTRAP_SITE),$(AT91BOOTSTRAP_SOURCE))
-
-$(AT91BOOTSTRAP_DIR)/.unpacked: $(DL_DIR)/$(AT91BOOTSTRAP_SOURCE)
- mkdir -p $(BUILD_DIR)
- $(AT91BOOTSTRAP_ZCAT) $(DL_DIR)/$(AT91BOOTSTRAP_SOURCE) | tar -C $(BUILD_DIR) $(TAR_OPTIONS) -
- toolchain/patch-kernel.sh $(AT91BOOTSTRAP_DIR) target/device/Atmel/at91bootstrap/ at91bootstrap-$(AT91BOOTSTRAP_VERSION)\*.patch
- touch $(AT91BOOTSTRAP_DIR)/.unpacked
-
-$(AT91BOOTSTRAP_DIR)/.configured: $(AT91BOOTSTRAP_DIR)/.unpacked .config
- $(MAKE) \
- MEMORY=$(AT91BOOTSTRAP_MEMORY) \
- CROSS_COMPILE=$(TARGET_CROSS) \
- -C $(AT91BOOTSTRAP_DIR) \
- $(AT91BOOTSTRAP_BOARD)_defconfig
- touch $(AT91BOOTSTRAP_DIR)/.configured
-
-# $(BOARD_NAME)_defconfig
-
-$(AT91BOOTSTRAP_TARGET): $(AT91BOOTSTRAP_DIR)/.configured
- $(MAKE) \
- MEMORY=$(AT91BOOTSTRAP_MEMORY) \
- CROSS_COMPILE=$(TARGET_CROSS) \
- AT91_CUSTOM_FLAGS="$(AT91_CUSTOM_FLAGS)" \
- -C $(AT91BOOTSTRAP_DIR)
-
-$(AT91BOOTSTRAP_DIR)/.installed:: $(AT91BOOTSTRAP_TARGET)
- mkdir -p $(BINARIES_DIR)
-ifeq ($(AT91BOOTSTRAP_VERSION),2.3)
- cp $(AT91BOOTSTRAP_TARGET) $(BINARIES_DIR)/$(AT91BOOTSTRAP_BINARY)
- $(call COPY_FILE, $(AT91BOOTSTRAP_TARGET), $(BR2_TARGET_ATMEL_COPYTO), $(AT91BOOTSTRAP_BINARY))
-else
- make MEMORY=$(AT91BOOTSTRAP_MEMORY) \
- CROSS_COMPILE=$(TARGET_CROSS) \
- -C $(AT91BOOTSTRAP_DIR) boot
- make DESTDIR=$(BINARIES_DIR) -C $(AT91BOOTSTRAP_DIR) install || \
- echo "Could not copy bootstrap to BINARIES_DIR"
-ifneq ($(BR2_TARGET_ATMEL_COPYTO),)
- make DESTDIR=$(BR2_TARGET_ATMEL_COPYTO) -C $(AT91BOOTSTRAP_DIR) install || \
- echo "Could not copy bootstrap to BR2_ATMEL_COPYTO"
-endif
-endif
- touch $@
-
-# cp $(AT91BOOTSTRAP_TARGET) $(BINARIES_DIR)/$(AT91BOOTSTRAP_BINARY)
-# cp $(AT91BOOTSTRAP_TARGET) $(BR2_TARGET_ATMEL_COPYTO)/$(AT91BOOTSTRAP_BINARY)
-
-.PHONY: at91bootstrap at91bootstrap-source
-
-at91bootstrap: $(AT91BOOTSTRAP_DIR)/.installed
-
-at91bootstrap-source: $(DL_DIR)/$(AT91BOOTSTRAP_SOURCE)
-
-at91bootstrap-unpacked: $(AT91BOOTSTRAP_DIR)/.unpacked
-
-.PHONY: at91bootstrap-clean at91bootstrap-dirclean
-
-at91bootstrap-clean:
- make -C $(AT91BOOTSTRAP_DIR) clean
-
-at91bootstrap-dirclean:
- rm -rf $(AT91BOOTSTRAP_DIR)
-
-#############################################################
-#
-# Toplevel Makefile options
-#
-#############################################################
-ifeq ($(BR2_TARGET_AT91BOOTSTRAP),y)
-TARGETS+=at91bootstrap
-endif
-
-at91bootstrap-status:
- @echo AT91BOOTSTRAP_BOARD=$(AT91BOOTSTRAP_BOARD)
-
+++ /dev/null
-include target/powerpc/*/*.mk
+++ /dev/null
-config BR2_TARGET_YABOOT
- bool "yaboot"
- depends on BR2_powerpc
- help
- The yaboot bootloader for new world powerpc systems.
+++ /dev/null
-ifeq ($(ARCH),powerpc)
-
-#############################################################
-#
-# yaboot
-#
-#############################################################
-
-YABOOT_SOURCE:=yaboot-1.3.13.tar.gz
-YABOOT_SITE:=http://penguinppc.org/bootloaders/yaboot
-YABOOT_DIR:=$(BUILD_DIR)/yaboot-1.3.13
-
-$(DL_DIR)/$(YABOOT_SOURCE):
- $(call DOWNLOAD,$(YABOOT_SITE),$(YABOOT_SOURCE))
-
-yaboot-source: $(DL_DIR)/$(YABOOT_SOURCE)
-
-$(YABOOT_DIR)/Makefile: $(DL_DIR)/$(YABOOT_SOURCE)
- $(ZCAT) $(DL_DIR)/$(YABOOT_SOURCE) | tar -C $(BUILD_DIR) -xvf -
- touch -c $(YABOOT_DIR)/Makefile
-
-$(YABOOT_DIR)/second/yaboot: $(YABOOT_DIR)/Makefile
- $(MAKE) -C $(YABOOT_DIR) CROSS=$(TARGET_CROSS)
- touch -c $(YABOOT_DIR)/second/yaboot
-
-yaboot: $(YABOOT_DIR)/second/yaboot
-
-yaboot-clean:
- $(MAKE) -C $(YABOOT_DIR) clean
-
-yaboot-dirclean:
- rm -rf $(YABOOT_DIR)
-
-endif
-
-#############################################################
-#
-# Toplevel Makefile options
-#
-#############################################################
-ifeq ($(BR2_TARGET_YABOOT),y)
-TARGETS+=yaboot
-endif
-
+++ /dev/null
-menuconfig BR2_TARGET_UBOOT
- bool "Das U-Boot Boot Monitor"
- help
- Build "Das U-Boot" Boot Monitor
-
-if BR2_TARGET_UBOOT
-config BR2_TARGET_UBOOT_BOARDNAME
- string "board name"
- default "$(BOARD_NAME)"
- help
- One of U-Boot supported boards to be built.
- This will be suffixed with _config to meet U-Boot standard naming.
-
-choice
- prompt "U-Boot Version"
- default BR2_TARGET_UBOOT_2010_03
- help
- Select the specific U-Boot version you want to use
-
-config BR2_TARGET_UBOOT_2010_03
- bool "u-boot-2010.03"
-
-config BR2_TARGET_UBOOT_2009_11
- bool "u-boot-2009.11"
-
-config BR2_TARGET_UBOOT_2009_08
- bool "u-boot-2009.08"
-
-config BR2_TARGET_UBOOT_2009_06
- bool "u-boot-2009.06"
- depends on BR2_DEPRECATED
-
-config BR2_TARGET_UBOOT_2009_03
- bool "u-boot-2009.03"
- depends on BR2_DEPRECATED
-
-config BR2_TARGET_UBOOT_2009_01
- bool "u-boot-2009.01"
- depends on BR2_DEPRECATED
-
-config BR2_TARGET_UBOOT_2008_10
- bool "u-boot-2008.10"
- depends on BR2_DEPRECATED
-
-config BR2_TARGET_UBOOT_1_2_0_ATMEL
- bool "u-boot-1.2.0-atmel"
- depends on BR2_TARGET_AT91
-
-endchoice
-
-config BR2_UBOOT_VERSION
- string
- default "2010.03" if BR2_TARGET_UBOOT_2010_03
- default "2009.11" if BR2_TARGET_UBOOT_2009_11
- default "2009.08" if BR2_TARGET_UBOOT_2009_08
- default "2009.06" if BR2_TARGET_UBOOT_2009_06
- default "2009.03" if BR2_TARGET_UBOOT_2009_03
- default "2009.01" if BR2_TARGET_UBOOT_2009_01
- default "2008.10" if BR2_TARGET_UBOOT_2008_10
- default "1.2.0-atmel" if BR2_TARGET_UBOOT_1_2_0_ATMEL
-
-config BR2_U_BOOT_SITE
- string
- default "$(BR2_ATMEL_MIRROR)" if BR2_TARGET_UBOOT_1_2_0_ATMEL
- default "ftp://ftp.denx.de/pub/u-boot"
-
-source "target/device/Config.in.u-boot"
-
-config BR2_TARGET_UBOOT_CUSTOM_PATCH
- string "custom patch"
- help
- If your board requires a custom patch, add the path to the file here.
- Most users may leave this empty
-
-choice
- prompt "Bootsource"
- depends on BR2_BOOTSOURCE
- default BR2_TARGET_UBOOT_BOOTSOURCE_DATAFLASHCARD
-
- config BR2_TARGET_UBOOT_BOOTSOURCE_DATAFLASHCARD
- bool "Boot from dataflashcard"
- depends on BR2_BOOTSOURCE_DATAFLASHCARD
-
- config BR2_TARGET_UBOOT_BOOTSOURCE_DATAFLASH
- bool "Boot from dataflash"
- depends on BR2_BOOTSOURCE_DATAFLASH
-
- config BR2_TARGET_UBOOT_BOOTSOURCE_NANDFLASH
- bool "Boot from a NAND flash"
- depends on BR2_BOOTSOURCE_NANDFLASH
-
- config BR2_TARGET_UBOOT_BOOTSOURCE_FLASH
- bool "Boot from a parallell flash"
- depends on BR2_BOOTSOURCE_FLASH
-
- config BR2_TARGET_UBOOT_BOOTSOURCE_SDCARD
- bool "Boot from an SD-Card"
- depends on BR2_BOOTSOURCE_SDCARD
-
- config BR2_TARGET_UBOOT_BOOTSOURCE_EEPROM
- bool "Boot from a serial EEPROM (Not yet supported)"
- depends on BR2_BOOTSOURCE_EEPROM
-
-endchoice
-
-config BR2_TARGET_UBOOT_BOOTSOURCE
- string
- depends on BR2_BOOTSOURCE
- default "dataflash" if BR2_TARGET_UBOOT_BOOTSOURCE_DATAFLASHCARD
- default "dataflash" if BR2_TARGET_UBOOT_BOOTSOURCE_DATAFLASH
- default "nandflash" if BR2_TARGET_UBOOT_BOOTSOURCE_NANDFLASH
- default "flash" if BR2_TARGET_UBOOT_BOOTSOURCE_FLASH
- default "sdcard" if BR2_TARGET_UBOOT_BOOTSOURCE_SDCARD
- default "eeprom" if BR2_TARGET_UBOOT_BOOTSOURCE_EEPROM
-
-config BR2_TARGET_UBOOT_SILENT
- bool "silent console"
- help
- If the option has been enabled, the output can be
- silenced by setting the environment variable "silent".
-
-config BR2_TARGET_UBOOT_TOOL_MKIMAGE
- bool "mkimage tool in target"
- help
- Install mkimage tool in target.
-
-config BR2_TARGET_UBOOT_TOOL_ENV
- bool "fw_printenv tool in target"
- help
- Install fw_printenv / fw_setenv tools in target.
-
-menuconfig BR2_TARGET_UBOOT_DEFAULT_ENV
- bool "Generate a default environment"
- help
- Will generate variables for factory default command
- and autoscript.
-
-if BR2_TARGET_UBOOT_DEFAULT_ENV
-choice
- prompt "SDRAM Memory size"
- default BR2_TARGET_UBOOT_SDRAM_SIZE_64M
- help
- Size of the onboard SDRAM
-
-config BR2_TARGET_UBOOT_SDRAM_SIZE_256MB
- bool "256 MB"
-
-config BR2_TARGET_UBOOT_SDRAM_SIZE_128MB
- bool "128 MB"
-
-config BR2_TARGET_UBOOT_SDRAM_SIZE_64MB
- bool "64 MB"
-
-config BR2_TARGET_UBOOT_SDRAM_SIZE_32MB
- bool "32 MB"
-
-config BR2_TARGET_UBOOT_SDRAM_SIZE_16MB
- bool "16 MB"
-
-config BR2_TARGET_UBOOT_SDRAM_SIZE_8MB
- bool "8 MB"
-
-endchoice
-
-config BR2_TARGET_UBOOT_MEMORY_SIZE
- string
- default "256M" if BR2_TARGET_UBOOT_SDRAM_SIZE_256MB
- default "128M" if BR2_TARGET_UBOOT_SDRAM_SIZE_128MB
- default "64M" if BR2_TARGET_UBOOT_SDRAM_SIZE_64MB
- default "32M" if BR2_TARGET_UBOOT_SDRAM_SIZE_32MB
- default "16M" if BR2_TARGET_UBOOT_SDRAM_SIZE_16MB
- default "8M" if BR2_TARGET_UBOOT_SDRAM_SIZE_8MB
-
-choice
- prompt "Kernel Size"
- default BR2_TARGET_UBOOT_KERNEL_SIZE_2_00MB
-
-config BR2_TARGET_UBOOT_KERNEL_SIZE_1_25MB
- bool "Kernel size is less than 1.25 MB"
-
-config BR2_TARGET_UBOOT_KERNEL_SIZE_1_50MB
- bool "Kernel size is less than 1.50 MB"
-
-config BR2_TARGET_UBOOT_KERNEL_SIZE_1_75MB
- bool "Kernel size is less than 1.75 MB"
-
-config BR2_TARGET_UBOOT_KERNEL_SIZE_2_00MB
- bool "Kernel size is less than 2.00 MB"
-
-config BR2_TARGET_UBOOT_KERNEL_SIZE_2_25MB
- bool "Kernel size is less than 2.25 MB"
-
-config BR2_TARGET_UBOOT_KERNEL_SIZE_2_50MB
- bool "Kernel size is less than 2.50 MB"
-
-endchoice
-
-choice
- prompt "Dataflash Size"
- depends on BR2_TARGET_UBOOT_BOOTSOURCE_DATAFLASHCARD || BR2_TARGET_UBOOT_BOOTSOURCE_DATAFLASH
- default BR2_TARGET_UBOOT_DATAFLASH_SIZE_2_00MB
-
-config BR2_TARGET_UBOOT_DATAFLASH_SIZE_8MB
- bool "Dataflash size is 8 MB"
-
-config BR2_TARGET_UBOOT_DATAFLASH_SIZE_4MB
- bool "Dataflash size is 4 MB"
-
-config BR2_TARGET_UBOOT_DATAFLASH_SIZE_2MB
- bool "Dataflash size is 2 MB"
-
-config BR2_TARGET_UBOOT_DATAFLASH_SIZE_1MB
- bool "Dataflash size is 1 MB"
-
-config BR2_TARGET_UBOOT_DATAFLASH_SIZE_0_50MB
- bool "Dataflash size is 0.5 MB"
-
-config BR2_TARGET_UBOOT_DATAFLASH_SIZE_0_25MB
- bool "Dataflash size is 0.25 MB"
-
-endchoice
-
-config BR2_TARGET_UBOOT_DATAFLASH_SIZE
- string
- depends on BR2_TARGET_UBOOT_BOOTSOURCE_DATAFLASHCARD || BR2_TARGET_UBOOT_BOOTSOURCE_DATAFLASH
- default "8M" if BR2_TARGET_DATAFLASH_SIZE_8MB
- default "4M" if BR2_TARGET_DATAFLASH_SIZE_4MB
- default "2M" if BR2_TARGET_DATAFLASH_SIZE_2MB
- default "1M" if BR2_TARGET_DATAFLASH_SIZE_1MB
- default "0.5M" if BR2_TARGET_DATAFLASH_SIZE_0_50MB
- default "0.25M" if BR2_TARGET_DATAFLASH_SIZE_0_25MB
-
-config BR2_TARGET_UBOOT_END_OF_FLASH
- string
- depends on BR2_TARGET_UBOOT_BOOTSOURCE_DATAFLASHCARD || BR2_TARGET_UBOOT_BOOTSOURCE_DATAFLASH
- default "C083FFFF" if BR2_TARGET_UBOOT_DATAFLASH_SIZE_8MB
- default "C041FFFF" if BR2_TARGET_UBOOT_DATAFLASH_SIZE_4MB
- default "C020FFFF" if BR2_TARGET_UBOOT_DATAFLASH_SIZE_2MB
- default "C0107FFF" if BR2_TARGET_UBOOT_DATAFLASH_SIZE_1MB
- default "C0083FFF" if BR2_TARGET_UBOOT_DATAFLASH_SIZE_0_50MB
- default "C0041FFF" if BR2_TARGET_UBOOT_DATAFLASH_SIZE_0_25MB
- help
-
-config BR2_TARGET_UBOOT_KERNEL_START
- string "Kernel SDRAM address"
- default "21000000"
- help
- Kernel is loaded to this address in SDRAM
-
-config BR2_TARGET_UBOOT_KERNEL_LOCATION
- string "Kernel flash address"
- depends on BR2_TARGET_UBOOT_BOOTSOURCE_DATAFLASHCARD || \
- BR2_TARGET_UBOOT_BOOTSOURCE_DATAFLASH
- default "C0042000" if BR2_TARGET_UBOOT_BOOTSOURCE_DATAFLASHCARD || BR2_TARGET_UBOOT_BOOTSOURCE_DATAFLASH
- default ""
- help
- Kernel location in dataflash
-
-config BR2_TARGET_UBOOT_FILESYSTEM_START
- string
- default "2114A000" if BR2_TARGET_UBOOT_KERNEL_SIZE_1_25MB
- default "2118C000" if BR2_TARGET_UBOOT_KERNEL_SIZE_1_50MB
- default "211CE000" if BR2_TARGET_UBOOT_KERNEL_SIZE_1_75MB
- default "21210000" if BR2_TARGET_UBOOT_KERNEL_SIZE_2_00MB
- default "21252000" if BR2_TARGET_UBOOT_KERNEL_SIZE_2_25MB
- default "21294000" if BR2_TARGET_UBOOT_KERNEL_SIZE_2_50MB
- help
- Kernel is loaded to this SDRAM address
- Assumes SDRAM starts at 20000000
- Will need to be updated if the SDRAM is located elsewhere
-
-config BR2_TARGET_UBOOT_FILESYSTEM_LOCATION
- string
- depends on BR2_TARGET_UBOOT_BOOTSOURCE_DATAFLASHCARD || \
- BR2_TARGET_UBOOT_BOOTSOURCE_DATAFLASH
- default "C018C000" if BR2_TARGET_UBOOT_KERNEL_SIZE_1_25MB
- default "C01CE000" if BR2_TARGET_UBOOT_KERNEL_SIZE_1_50MB
- default "C0210000" if BR2_TARGET_UBOOT_KERNEL_SIZE_1_75MB
- default "C0252000" if BR2_TARGET_UBOOT_KERNEL_SIZE_2_00MB
- default "C0294000" if BR2_TARGET_UBOOT_KERNEL_SIZE_2_25MB
- default "C02D6000" if BR2_TARGET_UBOOT_KERNEL_SIZE_2_50MB
- help
- Determine location for File System in Dataflash
- This needs to be updated for other memory technologies
-
-config BR2_TARGET_UBOOT_FILESYSTEM_SIZE
- string "File System Size"
- default "6000000"
- help
-
-menuconfig BR2_TARGET_UBOOT_NETWORK
- bool "Network Settings"
- default y
- help
- Network settings for U-boot
-
-if BR2_TARGET_UBOOT_NETWORK
-
-config BR2_TARGET_UBOOT_SERVERIP
- string "server ip"
- default "10.175.196.221"
- help
- TFTP server ip address
-
-config BR2_TARGET_UBOOT_IPADDR
- string "ip address"
- default "10.175.196.18"
- help
- Target ip address
-
-config BR2_TARGET_UBOOT_GATEWAY
- string "gateway ip"
- default "10.175.196.1"
- help
- Gateway ip address
-
-config BR2_TARGET_UBOOT_NETMASK
- string "netmask"
- default "255.255.255.0"
- help
- Network Mask
-
-config BR2_TARGET_UBOOT_ETHADDR
- string "ethernet address"
- default "04:25:fe:ed:00:18"
- help
- Target MAC address for the ethernet interface.
- This should be changed for production units
-
-config BR2_TARGET_UBOOT_ETH1ADDR
- string "ethernet 2 address"
- help
- Target MAC address for the second ethernet interface.
-
-endif # BR2_TARGET_UBOOT_NETWORK
-
-endif # BR2_TARGET_UBOOT_DEFAULT_ENV
-
-endif # BR2_TARGET_UBOOT
-
-config BR2_BOOTSOURCE_DATAFLASHCARD
- bool
- help
- Allow use of a dataflashcard as a boot source
-
-config BR2_BOOTSOURCE_DATAFLASH
- bool
- help
- Allow use of a dataflash as a boot source
-
-config BR2_BOOTSOURCE_NANDFLASH
- bool
- help
- Allow use of a NAND flash as a boot source
-
-config BR2_BOOTSOURCE_FLASH
- bool
- help
- Allow use of a flash RAM as a boot source
-
-config BR2_BOOTSOURCE_SDCARD
- bool
- help
- Allow use of an SD-card as a boot source
-
-config BR2_BOOTSOURCE_EEPROM
- bool
- help
- Allow use of a serial eeprom as a boot source
-
-config BR2_BOOTSOURCE
- bool
- default y if BR2_BOOTSOURCE_DATAFLASHCARD
- default y if BR2_BOOTSOURCE_DATAFLASH
- default y if BR2_BOOTSOURCE_NANDFLASH
- default y if BR2_BOOTSOURCE_FLASH
- default y if BR2_BOOTSOURCE_SDCARD
- default y if BR2_BOOTSOURCE_EEPROM
+++ /dev/null
-#############################################################
-#
-# U-Boot
-#
-#############################################################
-U_BOOT_VERSION:=$(call qstrip,$(BR2_UBOOT_VERSION))
-
-U_BOOT_SOURCE:=u-boot-$(U_BOOT_VERSION).tar.bz2
-
-U_BOOT_SITE:=$(call qstrip,$(BR2_U_BOOT_SITE))
-U_BOOT_DIR:=$(BUILD_DIR)/u-boot-$(U_BOOT_VERSION)
-U_BOOT_PATCH_DIR:=$(BUILD_DIR)/u-boot-$(U_BOOT_VERSION)-patches
-U_BOOT_CAT:=$(BZCAT)
-U_BOOT_BIN:=u-boot.bin
-U_BOOT_TARGET_BIN:=u-boot-$(U_BOOT_VERSION)-$(DATE).bin
-
-U_BOOT_TOOLS:=$(HOST_DIR)/usr/bin/mkimage
-MKIMAGE:=$(U_BOOT_TOOLS)
-U_BOOT_AUTOSCRIPT=$(BINARIES_DIR)/autoscript
-
-U_BOOT_TARGETS:=$(BINARIES_DIR)/$(U_BOOT_BIN) $(U_BOOT_TOOLS)
-
-ifeq ($(call qstrip,$(BR2_TARGET_UBOOT_DEFAULT_ENV)),y)
-U_BOOT_TARGETS += u-boot-autoscript
-endif
-
-TARGET_UBOOT_IPADDR:=$(call qstrip,$(BR2_TARGET_UBOOT_IPADDR))
-TARGET_UBOOT_SERVERIP:=$(call qstrip,$(BR2_TARGET_UBOOT_SERVERIP))
-TARGET_UBOOT_GATEWAY:=$(call qstrip,$(BR2_TARGET_UBOOT_GATEWAY))
-TARGET_UBOOT_NETMASK:=$(call qstrip,$(BR2_TARGET_UBOOT_NETMASK))
-TARGET_UBOOT_ETHADDR:=$(call qstrip,$(BR2_TARGET_UBOOT_ETHADDR))
-
-# u-boot still uses arch=ppc for powerpc
-U_BOOT_ARCH=$(KERNEL_ARCH:powerpc=ppc)
-ifeq ($(UBOOT_BOARD_NAME),)
-UBOOT_BOARD_NAME:=$(call qstrip,$(BR2_TARGET_UBOOT_BOARDNAME))
-endif
-
-U_BOOT_INC_CONF_FILE:=$(U_BOOT_DIR)/include/config.h
-
-U_BOOT_TARGET_TOOLS:=
-ifeq ($(BR2_TARGET_UBOOT_TOOL_MKIMAGE),y)
-U_BOOT_TARGETS+=$(TARGET_DIR)/usr/bin/mkimage
-endif
-ifeq ($(BR2_TARGET_UBOOT_TOOL_ENV),y)
-U_BOOT_TARGETS+=$(TARGET_DIR)/usr/sbin/fw_printenv
-endif
-
-U_BOOT_CONFIGURE_OPTS :=
-
-ifneq ($(BR2_TARGET_UBOOT_1_2_0_ATMEL),)
-U_BOOT_CONFIGURE_OPTS += CONFIG_NOSOFTFLOAT=1
-endif
-
-# Define a helper function
-define insert_define
-@echo "#ifdef $(strip $(1))" >> $(U_BOOT_INC_CONF_FILE)
-@echo "#undef $(strip $(1))" >> $(U_BOOT_INC_CONF_FILE)
-@echo "#endif" >> $(U_BOOT_INC_CONF_FILE)
-@echo '#define $(strip $(1)) $(call qstrip,$(2))' >> $(U_BOOT_INC_CONF_FILE)
-endef
-
-$(DL_DIR)/$(U_BOOT_SOURCE):
- $(call DOWNLOAD,$(U_BOOT_SITE),$(U_BOOT_SOURCE))
-
-$(U_BOOT_DIR)/.unpacked: $(DL_DIR)/$(U_BOOT_SOURCE)
- $(U_BOOT_CAT) $(DL_DIR)/$(U_BOOT_SOURCE) \
- | tar -C $(BUILD_DIR) $(TAR_OPTIONS) -
- mkdir -p $(U_BOOT_DIR)
- touch $@
-
-$(U_BOOT_DIR)/.patched: $(U_BOOT_DIR)/.unpacked
- toolchain/patch-kernel.sh $(U_BOOT_DIR) target/u-boot \
- u-boot-$(U_BOOT_VERSION)-\*.patch \
- u-boot-$(U_BOOT_VERSION)-\*.patch.$(ARCH)
-ifneq ($(strip $(U_BOOT_ARCH_PATCH_DIR)),)
- toolchain/patch-kernel.sh $(U_BOOT_DIR) $(U_BOOT_ARCH_PATCH_DIR) \*.patch
-endif
-ifneq ($(strip $(BR2_TARGET_UBOOT_CUSTOM_PATCH)),"")
- @mkdir -p $(U_BOOT_PATCH_DIR)
- cp -dpr $(BR2_TARGET_UBOOT_CUSTOM_PATCH) $(U_BOOT_PATCH_DIR)
- toolchain/patch-kernel.sh $(U_BOOT_DIR) $(U_BOOT_PATCH_DIR) \*.patch
-endif
- touch $@
-
-$(U_BOOT_DIR)/.configured: $(U_BOOT_DIR)/.patched
- $(TARGET_CONFIGURE_OPTS) \
- CFLAGS="$(TARGET_CFLAGS)" \
- LDFLAGS="$(TARGET_LDFLAGS)" \
- $(U_BOOT_CONFIGURE_OPTS) \
- $(MAKE) -C $(U_BOOT_DIR) \
- $(UBOOT_BOARD_NAME)_config
- touch $@
-
-$(U_BOOT_DIR)/.header_modified: $(U_BOOT_DIR)/.configured
- # Modify configuration header in $(U_BOOT_INC_CONF_FILE)
-ifdef BR2_TARGET_UBOOT_DEFAULT_ENV
- @echo >> $(U_BOOT_INC_CONF_FILE)
- @echo "/* Add a wrapper around the values Buildroot sets. */" >> $(U_BOOT_INC_CONF_FILE)
- @echo "#ifndef __BR2_ADDED_CONFIG_H" >> $(U_BOOT_INC_CONF_FILE)
- @echo "#define __BR2_ADDED_CONFIG_H" >> $(U_BOOT_INC_CONF_FILE)
- $(call insert_define, DATE, $(DATE))
- $(call insert_define, CONFIG_LOAD_SCRIPTS, 1)
-endif # BR2_TARGET_UBOOT_DEFAULT_ENV
-ifdef BR2_TARGET_UBOOT_NETWORK
-ifneq ($(strip $(BR2_TARGET_UBOOT_IPADDR)),"")
- $(call insert_define, CONFIG_IPADDR, $(BR2_TARGET_UBOOT_IPADDR))
-ifneq ($(strip $(BR2_TARGET_UBOOT_GATEWAY)),"")
- $(call insert_define, CONFIG_GATEWAYIP, $(BR2_TARGET_UBOOT_GATEWAY))
-endif
-ifneq ($(strip $(BR2_TARGET_UBOOT_NETMASK)),"")
- $(call insert_define, CONFIG_NETMASK, $(BR2_TARGET_UBOOT_NETMASK))
-endif
-endif # end BR2_TARGET_U_BOOT_IPADDR
-ifneq ($(strip $(BR2_TARGET_UBOOT_SERVERIP)),"")
- $(call insert_define, CONFIG_SERVERIP, $(BR2_TARGET_UBOOT_SERVERIP))
-endif
-ifneq ($(strip $(BR2_TARGET_UBOOT_ETHADDR)),"")
- $(call insert_define, CONFIG_ETHADDR, $(BR2_TARGET_UBOOT_ETHADDR))
-endif
-ifneq ($(strip $(BR2_TARGET_UBOOT_ETH1ADDR)),)
-ifneq ($(strip $(BR2_TARGET_UBOOT_ETH1ADDR)),"")
- $(call insert_define, CONFIG_ETH1ADDR, $(BR2_TARGET_UBOOT_ETH1ADDR))
-endif
-endif
-endif # BR2_TARGET_UBOOT_NETWORK
-ifeq ($(BR2_TARGET_UBOOT_SILENT),y)
- $(call insert_define, CONFIG_SILENT_CONSOLE,)
-endif
-ifdef BR2_TARGET_UBOOT_DEFAULT_ENV
-ifneq ($(strip $(BR2_TARGET_UBOOT_KERNEL_START)),"")
- $(call insert_define, KERNEL_START, $(BR2_TARGET_UBOOT_KERNEL_START))
-endif
-ifneq ($(strip $(BR2_TARGET_UBOOT_KERNEL_LOCATION)),"")
- $(call insert_define, KERNEL_LOCATION, $(BR2_TARGET_UBOOT_KERNEL_LOCATION))
-endif
-ifneq ($(strip $(BR2_TARGET_UBOOT_FILESYSTEM_START)),"")
- $(call insert_define, FILESYSTEM_START, $(BR2_TARGET_UBOOT_FILESYSTEM_START))
-endif
-ifneq ($(strip $(BR2_TARGET_UBOOT_FILESYSTEM_LOCATION)),"")
- $(call insert_define, FILESYSTEM_LOCATION, $(BR2_TARGET_UBOOT_FILESYSTEM_LOCATION))
-endif
-ifneq ($(strip $(BR2_TARGET_UBOOT_FILESYSTEM_SIZE)),"")
- $(call insert_define, FILESYSTEM_SIZE, $(BR2_TARGET_UBOOT_FILESYSTEM_SIZE))
-endif
-ifneq ($(strip $(BR2_TARGET_UBOOT_END_OF_FLASH)),"")
- $(call insert_define, END_OF_FLASH, $(BR2_TARGET_UBOOT_END_OF_FLASH))
-endif
-ifneq ($(strip $(BR2_TARGET_UBOOT_MEMORY_SIZE)),"")
- $(call insert_define, MEMORY_SIZE, $(BR2_TARGET_UBOOT_MEMORY_SIZE))
-endif
- @echo "#endif /* __BR2_ADDED_CONFIG_H */" >> $(U_BOOT_INC_CONF_FILE)
-endif # BR2_TARGET_UBOOT_DEFAULT_ENV
- touch $@
-
-$(U_BOOT_DIR)/$(U_BOOT_BIN): $(U_BOOT_DIR)/.header_modified
- $(TARGET_CONFIGURE_OPTS) \
- CFLAGS="$(TARGET_CFLAGS)" \
- LDFLAGS="$(TARGET_LDFLAGS)" \
- $(U_BOOT_CONFIGURE_OPTS) \
- $(MAKE) CROSS_COMPILE="$(TARGET_CROSS)" ARCH=$(U_BOOT_ARCH) \
- -C $(U_BOOT_DIR)
-
-$(BINARIES_DIR)/$(U_BOOT_BIN): $(U_BOOT_DIR)/$(U_BOOT_BIN)
- rm -f $(BINARIES_DIR)/$(U_BOOT_BIN)
- rm -f $(BINARIES_DIR)/$(U_BOOT_TARGET_BIN)
- cp -dpf $(U_BOOT_DIR)/$(U_BOOT_BIN) $(BINARIES_DIR)/$(U_BOOT_TARGET_BIN)
- (cd $(BINARIES_DIR); ln -s $(U_BOOT_TARGET_BIN) $(U_BOOT_BIN))
-
-$(U_BOOT_TOOLS): $(U_BOOT_DIR)/$(U_BOOT_BIN)
- mkdir -p $(@D)
- cp -dpf $(U_BOOT_DIR)/tools/mkimage $@
-
-$(TARGET_DIR)/usr/bin/mkimage: $(U_BOOT_DIR)/$(U_BOOT_BIN)
- mkdir -p $(@D)
- $(TARGET_CC) -I$(U_BOOT_DIR)/include -I$(U_BOOT_DIR)/tools \
- -DUSE_HOSTCC -o $@ \
- $(U_BOOT_DIR)/common/image.c \
- $(wildcard $(addprefix $(U_BOOT_DIR)/tools/,default_image.c \
- fit_image.c imximage.c kwbimage.c mkimage.c)) \
- $(addprefix $(U_BOOT_DIR)/lib_generic/,crc32.c md5.c sha1.c) \
- $(U_BOOT_DIR)/tools/os_support.c \
- $(U_BOOT_DIR)/libfdt/fdt*.c
-
- $(STRIPCMD) $(STRIP_STRIP_UNNEEDED) $@
-
-$(TARGET_DIR)/usr/sbin/fw_printenv: $(U_BOOT_DIR)/$(U_BOOT_BIN)
- mkdir -p $(@D)
- $(TARGET_CC) -I$(U_BOOT_DIR)/include -I$(LINUX_HEADERS_DIR)/include \
- -DUSE_HOSTCC -o $@ \
- $(U_BOOT_DIR)/tools/env/*.c $(U_BOOT_DIR)/lib_generic/crc32.c
- $(STRIPCMD) $(STRIP_STRIP_UNNEEDED) $@
- ln -sf fw_printenv $(TARGET_DIR)/usr/sbin/fw_setenv
-
-u-boot: $(U_BOOT_TARGETS)
-
-u-boot-autoscript: $(U_BOOT_AUTOSCRIPT).img
-
-u-boot-clean:
- -$(MAKE) -C $(U_BOOT_DIR) clean
- rm -f $(U_BOOT_TOOLS) $(U_BOOT_TARGET_TOOLS)
-
-u-boot-dirclean:
- rm -rf $(U_BOOT_DIR)
-
-u-boot-source: $(DL_DIR)/$(U_BOOT_SOURCE)
-
-u-boot-unpacked: $(U_BOOT_DIR)/.patched
-
-u-boot-configured: $(U_BOOT_DIR)/.header_modified
-
-#############################################################
-#
-# Generate an autoscript with the configration items
-#
-#############################################################
-
-$(U_BOOT_AUTOSCRIPT): .config
- rm -f $(U_BOOT_AUTOSCRIPT)
-ifneq ($(TARGET_UBOOT_IPADDR),)
- echo setenv ipaddr $(TARGET_UBOOT_IPADDR) > $(U_BOOT_AUTOSCRIPT)
-else
- echo TARGET_UBOOT_IPADDR="$(TARGET_UBOOT_IPADDR)"
-endif
-ifneq ($(TARGET_UBOOT_SERVERIP),)
- echo setenv serverip $(TARGET_UBOOT_SERVERIP) >> $(U_BOOT_AUTOSCRIPT)
-endif
-ifneq ($(TARGET_UBOOT_GATEWAY),)
- echo setenv gatewayip $(TARGET_UBOOT_GATEWAY) >> $(U_BOOT_AUTOSCRIPT)
-endif
-ifneq ($(TARGET_UBOOT_NETMASK),)
- echo setenv netmask $(TARGET_UBOOT_NETMASK) >> $(U_BOOT_AUTOSCRIPT)
-endif
- echo setenv linux $(LINUX26_KERNEL_NAME) >> $(U_BOOT_AUTOSCRIPT)
- echo setenv kernel-version $(LINUX26_VERSION) >> $(U_BOOT_AUTOSCRIPT)
- echo setenv kernel-date $(DATE) >> $(U_BOOT_AUTOSCRIPT)
- echo setenv hostname $(TARGET_HOSTNAME) >> $(U_BOOT_AUTOSCRIPT)
- echo setenv fs-date $(DATE) >> $(U_BOOT_AUTOSCRIPT)
- echo setenv rd-1 rootfs.$(ARCH)-$(DATE).ext2 >> $(U_BOOT_AUTOSCRIPT)
- echo setenv rd-2 rootfs.$(ARCH)-$(DATE).jffs2 >> $(U_BOOT_AUTOSCRIPT)
- echo setenv rd rootfs.$(BR2_ARCH)-$(DATE).ext2 >> $(U_BOOT_AUTOSCRIPT)
- echo setenv ver 1 >> $(U_BOOT_AUTOSCRIPT)
-ifneq ($(TARGET_UBOOT_ETHADDR),)
- echo setenv ethaddr $(TARGET_UBOOT_ETHADDR) >> $(U_BOOT_AUTOSCRIPT)
-endif
- echo setenv fstype ram >> $(U_BOOT_AUTOSCRIPT)
- echo fs >> $(U_BOOT_AUTOSCRIPT)
- echo os >> $(U_BOOT_AUTOSCRIPT)
- echo setargs >> $(U_BOOT_AUTOSCRIPT)
- echo saveenv >> $(U_BOOT_AUTOSCRIPT)
-
-$(U_BOOT_AUTOSCRIPT).img: $(U_BOOT_AUTOSCRIPT) $(MKIMAGE)
- $(MKIMAGE) -A $(ARCH) \
- -O linux \
- -T script \
- -C none \
- -a 0 \
- -e 0 \
- -n "autoscr config" \
- -d $(U_BOOT_AUTOSCRIPT) \
- $(U_BOOT_AUTOSCRIPT).img
-
-
-
-#############################################################
-#
-# Toplevel Makefile options
-#
-#############################################################
-ifeq ($(BR2_TARGET_UBOOT),y)
-TARGETS+=u-boot
-
-# we NEED a board name
-ifeq ($(UBOOT_BOARD_NAME),)
-$(error NO U-Boot board name set. Check your BR2_TARGET_UBOOT_BOARDNAME setting)
-endif
-
-endif
-
-u-boot-status:
- @echo
- @echo U_BOOT_INC_CONF_FILE = $(U_BOOT_INC_CONF_FILE)
- @echo BR2_UBOOT_VERSION = $(BR2_UBOOT_VERSION)
- @echo BR2_TARGET_UBOOT_SERVERIP = $(BR2_TARGET_UBOOT_SERVERIP)
- @echo BR2_TARGET_UBOOT_IPADDR = $(BR2_TARGET_UBOOT_IPADDR)
- @echo BR2_TARGET_UBOOT_GATEWAY = $(BR2_TARGET_UBOOT_GATEWAY)
- @echo BR2_TARGET_UBOOT_NETMASK = $(BR2_TARGET_UBOOT_NETMASK)
- @echo BR2_TARGET_UBOOT_ETH0ADDR = $(BR2_TARGET_UBOOT_ETHADDR)
- @echo BR2_TARGET_UBOOT_ETH1ADDR = $(BR2_TARGET_UBOOT_ETH1ADDR)
- @echo BR2_TARGET_UBOOT_SILENT = $(BR2_TARGET_UBOOT_SILENT)
- @echo UBOOT_BOARD_NAME=$(UBOOT_BOARD_NAME)
- @exit 0
-
+++ /dev/null
-diff -urN u-boot-2009.01-rc3/include/asm-avr32/io.h u-boot-avr32//include/asm-avr32/io.h
---- u-boot-2009.01-rc3/include/asm-avr32/io.h 2009-01-18 21:37:48.000000000 +0100
-+++ u-boot-avr32//include/asm-avr32/io.h 2009-01-22 07:14:38.000000000 +0100
-@@ -125,9 +125,4 @@
-
- }
-
--static inline phys_addr_t virt_to_phys(void * vaddr)
--{
-- return (phys_addr_t)(vaddr);
--}
--
- #endif /* __ASM_AVR32_IO_H */
+++ /dev/null
-ifeq ($(BR2_i386),y)
-include target/x86/*/*.mk
-endif
+++ /dev/null
-config BR2_TARGET_GRUB
- bool "grub"
- depends on BR2_i386 || BR2_x86_64
- help
- The GRand Unified Bootloader for x86 systems.
-
-config BR2_TARGET_GRUB_SPLASH
- bool "Splashimage support"
- depends on BR2_TARGET_GRUB
- help
- Add support for splashimage.
-
- A splashimage is a 14-color indexed .xpm picture which
- is displayed as background for the grub menu.
-
-config BR2_TARGET_GRUB_DISKLESS
- bool "diskless support"
- depends on BR2_TARGET_GRUB
- help
- enable diskless support
-
-config BR2_TARGET_GRUB_3c595
- bool "3Com595 driver"
- depends on BR2_TARGET_GRUB
- help
- enable 3Com595 driver
-
-config BR2_TARGET_GRUB_3c90x
- bool "3Com90x driver"
- depends on BR2_TARGET_GRUB
- help
- enable 3Com90x driver
-
-config BR2_TARGET_GRUB_davicom
- bool "Davicom driver"
- depends on BR2_TARGET_GRUB
- help
- enable Davicom driver
-
-config BR2_TARGET_GRUB_e1000
- bool "Etherexpress Pro/1000 driver"
- depends on BR2_TARGET_GRUB
- help
- enable Etherexpress Pro/1000 driver
-
-config BR2_TARGET_GRUB_eepro100
- bool "Etherexpress Pro/100 driver"
- depends on BR2_TARGET_GRUB
- help
- enable Etherexpress Pro/100 driver
-
-config BR2_TARGET_GRUB_epic100
- bool "SMC 83c170 EPIC/100 driver"
- depends on BR2_TARGET_GRUB
- help
- enable SMC 83c170 EPIC/100 driver
-
-config BR2_TARGET_GRUB_forcedeth
- bool "Nvidia Geforce driver"
- depends on BR2_TARGET_GRUB
- help
- enable Nvidia Geforce driver
-
-config BR2_TARGET_GRUB_natsemi
- bool "NatSemi DP8381x driver"
- depends on BR2_TARGET_GRUB
- help
- enable NatSemi DP8381x driver
-
-config BR2_TARGET_GRUB_ns83820
- bool "NS83820 driver"
- depends on BR2_TARGET_GRUB
- help
- enable NS83820 driver
-
-config BR2_TARGET_GRUB_ns8390
- bool "NE2000 PCI driver"
- depends on BR2_TARGET_GRUB
- help
- enable NE2000 PCI driver
-
-config BR2_TARGET_GRUB_pcnet32
- bool "AMD Lance/PCI PCNet/32 driver"
- depends on BR2_TARGET_GRUB
- help
- enable AMD Lance/PCI PCNet/32 driver
-
-config BR2_TARGET_GRUB_pnic
- bool "Bochs Pseudo Nic driver"
- depends on BR2_TARGET_GRUB
- help
- enable Bochs Pseudo Nic driver
-
-config BR2_TARGET_GRUB_rtl8139
- bool "Realtek 8139 driver"
- depends on BR2_TARGET_GRUB
- help
- enable Realtek 8139 driver
-
-config BR2_TARGET_GRUB_r8169
- bool "Realtek 8169 driver"
- depends on BR2_TARGET_GRUB
- help
- enable Realtek 8169 driver
-
-config BR2_TARGET_GRUB_sis900
- bool "SIS 900 and SIS 7016 driver"
- depends on BR2_TARGET_GRUB
- help
- enable SIS 900 and SIS 7016 driver
-
-config BR2_TARGET_GRUB_tg3
- bool "Broadcom Tigon3 driver"
- depends on BR2_TARGET_GRUB
- help
- enable Broadcom Tigon3 driver
-
-config BR2_TARGET_GRUB_tulip
- bool "Tulip driver"
- depends on BR2_TARGET_GRUB
- help
- enable Tulip driver
-
-config BR2_TARGET_GRUB_tlan
- bool "TI ThunderLAN driver"
- depends on BR2_TARGET_GRUB
- help
- enable TI ThunderLAN driver
-
-config BR2_TARGET_GRUB_undi
- bool "PXE UNDI driver"
- depends on BR2_TARGET_GRUB
- help
- enable PXE UNDI driver
-
-config BR2_TARGET_GRUB_via_rhine
- bool "Rhine-I/II driver"
- depends on BR2_TARGET_GRUB
- help
- enable Rhine-I/II driver
-
-config BR2_TARGET_GRUB_w89c840
- bool "Winbond W89c840 driver"
- depends on BR2_TARGET_GRUB
- help
- enable Winbond W89c840 driver
+++ /dev/null
-diff -rup grub-0.97.oorig/aclocal.m4 grub-0.97/aclocal.m4
---- grub-0.97.oorig/aclocal.m4 2005-05-08 04:41:18.000000000 +0200
-+++ grub-0.97/aclocal.m4 2006-03-12 14:00:35.000000000 +0100
-@@ -1,7 +1,7 @@
--# generated automatically by aclocal 1.9.4 -*- Autoconf -*-
-+# generated automatically by aclocal 1.9.6 -*- Autoconf -*-
-
--# Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004
--# Free Software Foundation, Inc.
-+# Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004,
-+# 2005 Free Software Foundation, Inc.
- # This file is free software; the Free Software Foundation
- # gives unlimited permission to copy and/or distribute it,
- # with or without modifications, as long as this notice is preserved.
-@@ -11,23 +11,11 @@
- # even the implied warranty of MERCHANTABILITY or FITNESS FOR A
- # PARTICULAR PURPOSE.
-
--# -*- Autoconf -*-
--# Copyright (C) 2002, 2003 Free Software Foundation, Inc.
--# Generated from amversion.in; do not edit by hand.
--
--# This program is free software; you can redistribute it and/or modify
--# it under the terms of the GNU General Public License as published by
--# the Free Software Foundation; either version 2, or (at your option)
--# any later version.
--
--# This program is distributed in the hope that it will be useful,
--# but WITHOUT ANY WARRANTY; without even the implied warranty of
--# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
--# GNU General Public License for more details.
--
--# You should have received a copy of the GNU General Public License
--# along with this program; if not, write to the Free Software
--# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA
-+# Copyright (C) 2002, 2003, 2005 Free Software Foundation, Inc.
-+#
-+# This file is free software; the Free Software Foundation
-+# gives unlimited permission to copy and/or distribute it,
-+# with or without modifications, as long as this notice is preserved.
-
- # AM_AUTOMAKE_VERSION(VERSION)
- # ----------------------------
-@@ -40,26 +28,15 @@ AC_DEFUN([AM_AUTOMAKE_VERSION], [am__api
- # Call AM_AUTOMAKE_VERSION so it can be traced.
- # This function is AC_REQUIREd by AC_INIT_AUTOMAKE.
- AC_DEFUN([AM_SET_CURRENT_AUTOMAKE_VERSION],
-- [AM_AUTOMAKE_VERSION([1.9.4])])
--
--# AM_AUX_DIR_EXPAND
--
--# Copyright (C) 2001, 2003 Free Software Foundation, Inc.
-+ [AM_AUTOMAKE_VERSION([1.9.6])])
-
--# This program is free software; you can redistribute it and/or modify
--# it under the terms of the GNU General Public License as published by
--# the Free Software Foundation; either version 2, or (at your option)
--# any later version.
-+# AM_AUX_DIR_EXPAND -*- Autoconf -*-
-
--# This program is distributed in the hope that it will be useful,
--# but WITHOUT ANY WARRANTY; without even the implied warranty of
--# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
--# GNU General Public License for more details.
--
--# You should have received a copy of the GNU General Public License
--# along with this program; if not, write to the Free Software
--# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA
--# 02111-1307, USA.
-+# Copyright (C) 2001, 2003, 2005 Free Software Foundation, Inc.
-+#
-+# This file is free software; the Free Software Foundation
-+# gives unlimited permission to copy and/or distribute it,
-+# with or without modifications, as long as this notice is preserved.
-
- # For projects using AC_CONFIG_AUX_DIR([foo]), Autoconf sets
- # $ac_aux_dir to `$srcdir/foo'. In other projects, it is set to
-@@ -106,26 +83,16 @@ AC_PREREQ([2.50])dnl
- am_aux_dir=`cd $ac_aux_dir && pwd`
- ])
-
--# AM_CONDITIONAL -*- Autoconf -*-
-+# AM_CONDITIONAL -*- Autoconf -*-
-
--# Copyright (C) 1997, 2000, 2001, 2003, 2004 Free Software Foundation, Inc.
--
--# This program is free software; you can redistribute it and/or modify
--# it under the terms of the GNU General Public License as published by
--# the Free Software Foundation; either version 2, or (at your option)
--# any later version.
--
--# This program is distributed in the hope that it will be useful,
--# but WITHOUT ANY WARRANTY; without even the implied warranty of
--# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
--# GNU General Public License for more details.
--
--# You should have received a copy of the GNU General Public License
--# along with this program; if not, write to the Free Software
--# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA
--# 02111-1307, USA.
-+# Copyright (C) 1997, 2000, 2001, 2003, 2004, 2005
-+# Free Software Foundation, Inc.
-+#
-+# This file is free software; the Free Software Foundation
-+# gives unlimited permission to copy and/or distribute it,
-+# with or without modifications, as long as this notice is preserved.
-
--# serial 6
-+# serial 7
-
- # AM_CONDITIONAL(NAME, SHELL-CONDITION)
- # -------------------------------------
-@@ -149,26 +116,15 @@ AC_CONFIG_COMMANDS_PRE(
- Usually this means the macro was only invoked conditionally.]])
- fi])])
-
--# serial 7 -*- Autoconf -*-
-
--# Copyright (C) 1999, 2000, 2001, 2002, 2003, 2004
-+# Copyright (C) 1999, 2000, 2001, 2002, 2003, 2004, 2005
- # Free Software Foundation, Inc.
-+#
-+# This file is free software; the Free Software Foundation
-+# gives unlimited permission to copy and/or distribute it,
-+# with or without modifications, as long as this notice is preserved.
-
--# This program is free software; you can redistribute it and/or modify
--# it under the terms of the GNU General Public License as published by
--# the Free Software Foundation; either version 2, or (at your option)
--# any later version.
--
--# This program is distributed in the hope that it will be useful,
--# but WITHOUT ANY WARRANTY; without even the implied warranty of
--# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
--# GNU General Public License for more details.
--
--# You should have received a copy of the GNU General Public License
--# along with this program; if not, write to the Free Software
--# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA
--# 02111-1307, USA.
--
-+# serial 8
-
- # There are a few dirty hacks below to avoid letting `AC_PROG_CC' be
- # written in clear, in which case automake, when reading aclocal.m4,
-@@ -177,7 +133,6 @@ fi])])
- # CC etc. in the Makefile, will ask for an AC_PROG_CC use...
-
-
--
- # _AM_DEPENDENCIES(NAME)
- # ----------------------
- # See how the compiler implements dependency checking.
-@@ -317,27 +272,16 @@ AM_CONDITIONAL([AMDEP], [test "x$enable_
- AC_SUBST([AMDEPBACKSLASH])
- ])
-
--# Generate code to set up dependency tracking. -*- Autoconf -*-
--
--# Copyright (C) 1999, 2000, 2001, 2002, 2003, 2004
--# Free Software Foundation, Inc.
--
--# This program is free software; you can redistribute it and/or modify
--# it under the terms of the GNU General Public License as published by
--# the Free Software Foundation; either version 2, or (at your option)
--# any later version.
-+# Generate code to set up dependency tracking. -*- Autoconf -*-
-
--# This program is distributed in the hope that it will be useful,
--# but WITHOUT ANY WARRANTY; without even the implied warranty of
--# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
--# GNU General Public License for more details.
--
--# You should have received a copy of the GNU General Public License
--# along with this program; if not, write to the Free Software
--# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA
--# 02111-1307, USA.
-+# Copyright (C) 1999, 2000, 2001, 2002, 2003, 2004, 2005
-+# Free Software Foundation, Inc.
-+#
-+# This file is free software; the Free Software Foundation
-+# gives unlimited permission to copy and/or distribute it,
-+# with or without modifications, as long as this notice is preserved.
-
--#serial 2
-+#serial 3
-
- # _AM_OUTPUT_DEPENDENCY_COMMANDS
- # ------------------------------
-@@ -396,30 +340,19 @@ AC_DEFUN([AM_OUTPUT_DEPENDENCY_COMMANDS]
- [AMDEP_TRUE="$AMDEP_TRUE" ac_aux_dir="$ac_aux_dir"])
- ])
-
--# Do all the work for Automake. -*- Autoconf -*-
-+# Do all the work for Automake. -*- Autoconf -*-
-
--# This macro actually does too much some checks are only needed if
--# your package does certain things. But this isn't really a big deal.
--
--# Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004
-+# Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005
- # Free Software Foundation, Inc.
-+#
-+# This file is free software; the Free Software Foundation
-+# gives unlimited permission to copy and/or distribute it,
-+# with or without modifications, as long as this notice is preserved.
-
--# This program is free software; you can redistribute it and/or modify
--# it under the terms of the GNU General Public License as published by
--# the Free Software Foundation; either version 2, or (at your option)
--# any later version.
--
--# This program is distributed in the hope that it will be useful,
--# but WITHOUT ANY WARRANTY; without even the implied warranty of
--# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
--# GNU General Public License for more details.
--
--# You should have received a copy of the GNU General Public License
--# along with this program; if not, write to the Free Software
--# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA
--# 02111-1307, USA.
-+# serial 12
-
--# serial 11
-+# This macro actually does too much. Some checks are only needed if
-+# your package does certain things. But this isn't really a big deal.
-
- # AM_INIT_AUTOMAKE(PACKAGE, VERSION, [NO-DEFINE])
- # AM_INIT_AUTOMAKE([OPTIONS])
-@@ -521,51 +454,27 @@ for _am_header in $config_headers :; do
- done
- echo "timestamp for $1" >`AS_DIRNAME([$1])`/stamp-h[]$_am_stamp_count])
-
-+# Copyright (C) 2001, 2003, 2005 Free Software Foundation, Inc.
-+#
-+# This file is free software; the Free Software Foundation
-+# gives unlimited permission to copy and/or distribute it,
-+# with or without modifications, as long as this notice is preserved.
-+
- # AM_PROG_INSTALL_SH
- # ------------------
- # Define $install_sh.
--
--# Copyright (C) 2001, 2003 Free Software Foundation, Inc.
--
--# This program is free software; you can redistribute it and/or modify
--# it under the terms of the GNU General Public License as published by
--# the Free Software Foundation; either version 2, or (at your option)
--# any later version.
--
--# This program is distributed in the hope that it will be useful,
--# but WITHOUT ANY WARRANTY; without even the implied warranty of
--# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
--# GNU General Public License for more details.
--
--# You should have received a copy of the GNU General Public License
--# along with this program; if not, write to the Free Software
--# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA
--# 02111-1307, USA.
--
- AC_DEFUN([AM_PROG_INSTALL_SH],
- [AC_REQUIRE([AM_AUX_DIR_EXPAND])dnl
- install_sh=${install_sh-"$am_aux_dir/install-sh"}
- AC_SUBST(install_sh)])
-
--# -*- Autoconf -*-
--# Copyright (C) 2003 Free Software Foundation, Inc.
--
--# This program is free software; you can redistribute it and/or modify
--# it under the terms of the GNU General Public License as published by
--# the Free Software Foundation; either version 2, or (at your option)
--# any later version.
--
--# This program is distributed in the hope that it will be useful,
--# but WITHOUT ANY WARRANTY; without even the implied warranty of
--# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
--# GNU General Public License for more details.
--
--# You should have received a copy of the GNU General Public License
--# along with this program; if not, write to the Free Software
--# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA
--# 02111-1307, USA.
-+# Copyright (C) 2003, 2005 Free Software Foundation, Inc.
-+#
-+# This file is free software; the Free Software Foundation
-+# gives unlimited permission to copy and/or distribute it,
-+# with or without modifications, as long as this notice is preserved.
-
--# serial 1
-+# serial 2
-
- # Check whether the underlying file-system supports filenames
- # with a leading dot. For instance MS-DOS doesn't.
-@@ -580,28 +489,17 @@ fi
- rmdir .tst 2>/dev/null
- AC_SUBST([am__leading_dot])])
-
--# Add --enable-maintainer-mode option to configure.
-+# Add --enable-maintainer-mode option to configure. -*- Autoconf -*-
- # From Jim Meyering
-
--# Copyright (C) 1996, 1998, 2000, 2001, 2002, 2003, 2004
-+# Copyright (C) 1996, 1998, 2000, 2001, 2002, 2003, 2004, 2005
- # Free Software Foundation, Inc.
-+#
-+# This file is free software; the Free Software Foundation
-+# gives unlimited permission to copy and/or distribute it,
-+# with or without modifications, as long as this notice is preserved.
-
--# This program is free software; you can redistribute it and/or modify
--# it under the terms of the GNU General Public License as published by
--# the Free Software Foundation; either version 2, or (at your option)
--# any later version.
--
--# This program is distributed in the hope that it will be useful,
--# but WITHOUT ANY WARRANTY; without even the implied warranty of
--# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
--# GNU General Public License for more details.
--
--# You should have received a copy of the GNU General Public License
--# along with this program; if not, write to the Free Software
--# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA
--# 02111-1307, USA.
--
--# serial 3
-+# serial 4
-
- AC_DEFUN([AM_MAINTAINER_MODE],
- [AC_MSG_CHECKING([whether to enable maintainer-specific portions of Makefiles])
-@@ -620,26 +518,15 @@ AC_DEFUN([AM_MAINTAINER_MODE],
-
- AU_DEFUN([jm_MAINTAINER_MODE], [AM_MAINTAINER_MODE])
-
--# Check to see how 'make' treats includes. -*- Autoconf -*-
--
--# Copyright (C) 2001, 2002, 2003 Free Software Foundation, Inc.
-+# Check to see how 'make' treats includes. -*- Autoconf -*-
-
--# This program is free software; you can redistribute it and/or modify
--# it under the terms of the GNU General Public License as published by
--# the Free Software Foundation; either version 2, or (at your option)
--# any later version.
--
--# This program is distributed in the hope that it will be useful,
--# but WITHOUT ANY WARRANTY; without even the implied warranty of
--# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
--# GNU General Public License for more details.
--
--# You should have received a copy of the GNU General Public License
--# along with this program; if not, write to the Free Software
--# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA
--# 02111-1307, USA.
-+# Copyright (C) 2001, 2002, 2003, 2005 Free Software Foundation, Inc.
-+#
-+# This file is free software; the Free Software Foundation
-+# gives unlimited permission to copy and/or distribute it,
-+# with or without modifications, as long as this notice is preserved.
-
--# serial 2
-+# serial 3
-
- # AM_MAKE_INCLUDE()
- # -----------------
-@@ -683,27 +570,16 @@ AC_MSG_RESULT([$_am_result])
- rm -f confinc confmf
- ])
-
--# -*- Autoconf -*-
--
--
--# Copyright (C) 1997, 1999, 2000, 2001, 2003 Free Software Foundation, Inc.
--
--# This program is free software; you can redistribute it and/or modify
--# it under the terms of the GNU General Public License as published by
--# the Free Software Foundation; either version 2, or (at your option)
--# any later version.
-+# Fake the existence of programs that GNU maintainers use. -*- Autoconf -*-
-
--# This program is distributed in the hope that it will be useful,
--# but WITHOUT ANY WARRANTY; without even the implied warranty of
--# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
--# GNU General Public License for more details.
--
--# You should have received a copy of the GNU General Public License
--# along with this program; if not, write to the Free Software
--# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA
--# 02111-1307, USA.
-+# Copyright (C) 1997, 1999, 2000, 2001, 2003, 2005
-+# Free Software Foundation, Inc.
-+#
-+# This file is free software; the Free Software Foundation
-+# gives unlimited permission to copy and/or distribute it,
-+# with or without modifications, as long as this notice is preserved.
-
--# serial 3
-+# serial 4
-
- # AM_MISSING_PROG(NAME, PROGRAM)
- # ------------------------------
-@@ -729,27 +605,16 @@ else
- fi
- ])
-
-+# Copyright (C) 2003, 2004, 2005 Free Software Foundation, Inc.
-+#
-+# This file is free software; the Free Software Foundation
-+# gives unlimited permission to copy and/or distribute it,
-+# with or without modifications, as long as this notice is preserved.
-+
- # AM_PROG_MKDIR_P
- # ---------------
- # Check whether `mkdir -p' is supported, fallback to mkinstalldirs otherwise.
--
--# Copyright (C) 2003, 2004 Free Software Foundation, Inc.
--
--# This program is free software; you can redistribute it and/or modify
--# it under the terms of the GNU General Public License as published by
--# the Free Software Foundation; either version 2, or (at your option)
--# any later version.
--
--# This program is distributed in the hope that it will be useful,
--# but WITHOUT ANY WARRANTY; without even the implied warranty of
--# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
--# GNU General Public License for more details.
--
--# You should have received a copy of the GNU General Public License
--# along with this program; if not, write to the Free Software
--# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA
--# 02111-1307, USA.
--
-+#
- # Automake 1.8 used `mkdir -m 0755 -p --' to ensure that directories
- # created by `make install' are always world readable, even if the
- # installer happens to have an overly restrictive umask (e.g. 077).
-@@ -803,26 +668,15 @@ else
- fi
- AC_SUBST([mkdir_p])])
-
--# Helper functions for option handling. -*- Autoconf -*-
-+# Helper functions for option handling. -*- Autoconf -*-
-
--# Copyright (C) 2001, 2002, 2003 Free Software Foundation, Inc.
--
--# This program is free software; you can redistribute it and/or modify
--# it under the terms of the GNU General Public License as published by
--# the Free Software Foundation; either version 2, or (at your option)
--# any later version.
--
--# This program is distributed in the hope that it will be useful,
--# but WITHOUT ANY WARRANTY; without even the implied warranty of
--# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
--# GNU General Public License for more details.
--
--# You should have received a copy of the GNU General Public License
--# along with this program; if not, write to the Free Software
--# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA
--# 02111-1307, USA.
-+# Copyright (C) 2001, 2002, 2003, 2005 Free Software Foundation, Inc.
-+#
-+# This file is free software; the Free Software Foundation
-+# gives unlimited permission to copy and/or distribute it,
-+# with or without modifications, as long as this notice is preserved.
-
--# serial 2
-+# serial 3
-
- # _AM_MANGLE_OPTION(NAME)
- # -----------------------
-@@ -847,28 +701,16 @@ AC_DEFUN([_AM_SET_OPTIONS],
- AC_DEFUN([_AM_IF_OPTION],
- [m4_ifset(_AM_MANGLE_OPTION([$1]), [$2], [$3])])
-
--#
--# Check to make sure that the build environment is sane.
--#
--
--# Copyright (C) 1996, 1997, 2000, 2001, 2003 Free Software Foundation, Inc.
--
--# This program is free software; you can redistribute it and/or modify
--# it under the terms of the GNU General Public License as published by
--# the Free Software Foundation; either version 2, or (at your option)
--# any later version.
-+# Check to make sure that the build environment is sane. -*- Autoconf -*-
-
--# This program is distributed in the hope that it will be useful,
--# but WITHOUT ANY WARRANTY; without even the implied warranty of
--# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
--# GNU General Public License for more details.
--
--# You should have received a copy of the GNU General Public License
--# along with this program; if not, write to the Free Software
--# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA
--# 02111-1307, USA.
-+# Copyright (C) 1996, 1997, 2000, 2001, 2003, 2005
-+# Free Software Foundation, Inc.
-+#
-+# This file is free software; the Free Software Foundation
-+# gives unlimited permission to copy and/or distribute it,
-+# with or without modifications, as long as this notice is preserved.
-
--# serial 3
-+# serial 4
-
- # AM_SANITY_CHECK
- # ---------------
-@@ -911,25 +753,14 @@ Check your system clock])
- fi
- AC_MSG_RESULT(yes)])
-
--# AM_PROG_INSTALL_STRIP
--
--# Copyright (C) 2001, 2003 Free Software Foundation, Inc.
--
--# This program is free software; you can redistribute it and/or modify
--# it under the terms of the GNU General Public License as published by
--# the Free Software Foundation; either version 2, or (at your option)
--# any later version.
--
--# This program is distributed in the hope that it will be useful,
--# but WITHOUT ANY WARRANTY; without even the implied warranty of
--# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
--# GNU General Public License for more details.
--
--# You should have received a copy of the GNU General Public License
--# along with this program; if not, write to the Free Software
--# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA
--# 02111-1307, USA.
-+# Copyright (C) 2001, 2003, 2005 Free Software Foundation, Inc.
-+#
-+# This file is free software; the Free Software Foundation
-+# gives unlimited permission to copy and/or distribute it,
-+# with or without modifications, as long as this notice is preserved.
-
-+# AM_PROG_INSTALL_STRIP
-+# ---------------------
- # One issue with vendor `install' (even GNU) is that you can't
- # specify the program used to strip binaries. This is especially
- # annoying in cross-compiling environments, where the build's strip
-@@ -952,25 +783,13 @@ AC_SUBST([INSTALL_STRIP_PROGRAM])])
-
- # Check how to create a tarball. -*- Autoconf -*-
-
--# Copyright (C) 2004 Free Software Foundation, Inc.
--
--# This program is free software; you can redistribute it and/or modify
--# it under the terms of the GNU General Public License as published by
--# the Free Software Foundation; either version 2, or (at your option)
--# any later version.
--
--# This program is distributed in the hope that it will be useful,
--# but WITHOUT ANY WARRANTY; without even the implied warranty of
--# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
--# GNU General Public License for more details.
--
--# You should have received a copy of the GNU General Public License
--# along with this program; if not, write to the Free Software
--# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA
--# 02111-1307, USA.
--
--# serial 1
-+# Copyright (C) 2004, 2005 Free Software Foundation, Inc.
-+#
-+# This file is free software; the Free Software Foundation
-+# gives unlimited permission to copy and/or distribute it,
-+# with or without modifications, as long as this notice is preserved.
-
-+# serial 2
-
- # _AM_PROG_TAR(FORMAT)
- # --------------------
-Only in grub-0.97/: autom4te.cache
-diff -rup grub-0.97.oorig/configure grub-0.97/configure
---- grub-0.97.oorig/configure 2005-05-08 04:48:12.000000000 +0200
-+++ grub-0.97/configure 2006-03-12 14:00:38.000000000 +0100
-@@ -311,7 +311,7 @@ ac_includes_default="\
- # include <unistd.h>
- #endif"
-
--ac_subst_vars='SHELL PATH_SEPARATOR PACKAGE_NAME PACKAGE_TARNAME PACKAGE_VERSION PACKAGE_STRING PACKAGE_BUGREPORT exec_prefix prefix program_transform_name bindir sbindir libexecdir datadir sysconfdir sharedstatedir localstatedir libdir includedir oldincludedir infodir mandir build_alias host_alias target_alias DEFS ECHO_C ECHO_N ECHO_T LIBS INSTALL_PROGRAM INSTALL_SCRIPT INSTALL_DATA CYGPATH_W PACKAGE VERSION ACLOCAL AUTOCONF AUTOMAKE AUTOHEADER MAKEINFO install_sh STRIP ac_ct_STRIP INSTALL_STRIP_PROGRAM mkdir_p AWK SET_MAKE am__leading_dot AMTAR am__tar am__untar build build_cpu build_vendor build_os host host_cpu host_vendor host_os MAINTAINER_MODE_TRUE MAINTAINER_MODE_FALSE MAINT PERL CC ac_ct_CC CFLAGS LDFLAGS CPPFLAGS EXEEXT OBJEXT DEPDIR am__include am__quote AMDEP_TRUE AMDEP_FALSE AMDEPBACKSLASH CCDEPMODE am__fastdepCC_TRUE am__fastdepCC_FALSE CCAS RANLIB ac_ct_RANLIB STAGE1_CFLAGS STAGE2_CFLAGS GRUB_CFLAGS OBJCOPY ac_ct_OBJCOPY GRUB_LIBS CPP EGREP NETBOOT_SUPPORT_TRUE NETBOOT_SUPPORT_FALSE DISKLESS_SUPPORT_TRUE DISKLESS_SUPPORT_FALSE HERCULES_SUPPORT_TRUE HERCULES_SUPPORT_FALSE SERIAL_SUPPORT_TRUE SERIAL_SUPPORT_FALSE SERIAL_SPEED_SIMULATION_TRUE SERIAL_SPEED_SIMULATION_FALSE BUILD_EXAMPLE_KERNEL_TRUE BUILD_EXAMPLE_KERNEL_FALSE FSYS_CFLAGS NET_CFLAGS NET_EXTRAFLAGS NETBOOT_DRIVERS CCASFLAGS LIBOBJS LTLIBOBJS'
-+ac_subst_vars='SHELL PATH_SEPARATOR PACKAGE_NAME PACKAGE_TARNAME PACKAGE_VERSION PACKAGE_STRING PACKAGE_BUGREPORT exec_prefix prefix program_transform_name bindir sbindir libexecdir datadir sysconfdir sharedstatedir localstatedir libdir includedir oldincludedir infodir mandir build_alias host_alias target_alias DEFS ECHO_C ECHO_N ECHO_T LIBS INSTALL_PROGRAM INSTALL_SCRIPT INSTALL_DATA CYGPATH_W PACKAGE VERSION ACLOCAL AUTOCONF AUTOMAKE AUTOHEADER MAKEINFO install_sh STRIP ac_ct_STRIP INSTALL_STRIP_PROGRAM mkdir_p AWK SET_MAKE am__leading_dot AMTAR am__tar am__untar build build_cpu build_vendor build_os host host_cpu host_vendor host_os MAINTAINER_MODE_TRUE MAINTAINER_MODE_FALSE MAINT PERL CC ac_ct_CC CFLAGS LDFLAGS CPPFLAGS EXEEXT OBJEXT DEPDIR am__include am__quote AMDEP_TRUE AMDEP_FALSE AMDEPBACKSLASH CCDEPMODE am__fastdepCC_TRUE am__fastdepCC_FALSE CCAS RANLIB ac_ct_RANLIB STAGE1_CFLAGS STAGE2_CFLAGS GRUB_CFLAGS OBJCOPY ac_ct_OBJCOPY GRUB_LIBS CPP EGREP NETBOOT_SUPPORT_TRUE NETBOOT_SUPPORT_FALSE DISKLESS_SUPPORT_TRUE DISKLESS_SUPPORT_FALSE GRAPHICS_SUPPORT_TRUE GRAPHICS_SUPPORT_FALSE HERCULES_SUPPORT_TRUE HERCULES_SUPPORT_FALSE SERIAL_SUPPORT_TRUE SERIAL_SUPPORT_FALSE SERIAL_SPEED_SIMULATION_TRUE SERIAL_SPEED_SIMULATION_FALSE BUILD_EXAMPLE_KERNEL_TRUE BUILD_EXAMPLE_KERNEL_FALSE FSYS_CFLAGS NET_CFLAGS NET_EXTRAFLAGS NETBOOT_DRIVERS CCASFLAGS LIBOBJS LTLIBOBJS'
- ac_subst_files=''
-
- # Initialize some variables set by options.
-@@ -914,6 +914,7 @@ Optional Features:
- set the default memory location for WD/SMC
- --enable-cs-scan=LIST probe for CS89x0 base address using LIST
- --enable-diskless enable diskless support
-+ --disable-graphics disable graphics terminal support
- --disable-hercules disable hercules terminal support
- --disable-serial disable serial terminal support
- --enable-serial-speed-simulation
-@@ -1032,7 +1033,7 @@ esac
- else
- echo "$as_me: WARNING: no configuration information is in $ac_dir" >&2
- fi
-- cd $ac_popdir
-+ cd "$ac_popdir"
- done
- fi
-
-@@ -2631,8 +2632,7 @@ if { (eval echo "$as_me:$LINENO: \"$ac_c
- cat conftest.err >&5
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); } &&
-- { ac_try='test -z "$ac_c_werror_flag"
-- || test ! -s conftest.err'
-+ { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err'
- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
- (eval $ac_try) 2>&5
- ac_status=$?
-@@ -2690,8 +2690,7 @@ if { (eval echo "$as_me:$LINENO: \"$ac_c
- cat conftest.err >&5
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); } &&
-- { ac_try='test -z "$ac_c_werror_flag"
-- || test ! -s conftest.err'
-+ { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err'
- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
- (eval $ac_try) 2>&5
- ac_status=$?
-@@ -2807,8 +2806,7 @@ if { (eval echo "$as_me:$LINENO: \"$ac_c
- cat conftest.err >&5
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); } &&
-- { ac_try='test -z "$ac_c_werror_flag"
-- || test ! -s conftest.err'
-+ { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err'
- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
- (eval $ac_try) 2>&5
- ac_status=$?
-@@ -2862,8 +2860,7 @@ if { (eval echo "$as_me:$LINENO: \"$ac_c
- cat conftest.err >&5
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); } &&
-- { ac_try='test -z "$ac_c_werror_flag"
-- || test ! -s conftest.err'
-+ { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err'
- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
- (eval $ac_try) 2>&5
- ac_status=$?
-@@ -2908,8 +2905,7 @@ if { (eval echo "$as_me:$LINENO: \"$ac_c
- cat conftest.err >&5
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); } &&
-- { ac_try='test -z "$ac_c_werror_flag"
-- || test ! -s conftest.err'
-+ { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err'
- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
- (eval $ac_try) 2>&5
- ac_status=$?
-@@ -2953,8 +2949,7 @@ if { (eval echo "$as_me:$LINENO: \"$ac_c
- cat conftest.err >&5
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); } &&
-- { ac_try='test -z "$ac_c_werror_flag"
-- || test ! -s conftest.err'
-+ { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err'
- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
- (eval $ac_try) 2>&5
- ac_status=$?
-@@ -3458,8 +3453,7 @@ if { (eval echo "$as_me:$LINENO: \"$ac_c
- cat conftest.err >&5
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); } &&
-- { ac_try='test -z "$ac_c_werror_flag"
-- || test ! -s conftest.err'
-+ { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err'
- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
- (eval $ac_try) 2>&5
- ac_status=$?
-@@ -3523,8 +3517,7 @@ if { (eval echo "$as_me:$LINENO: \"$ac_c
- cat conftest.err >&5
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); } &&
-- { ac_try='test -z "$ac_c_werror_flag"
-- || test ! -s conftest.err'
-+ { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err'
- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
- (eval $ac_try) 2>&5
- ac_status=$?
-@@ -3595,8 +3588,7 @@ if { (eval echo "$as_me:$LINENO: \"$ac_c
- cat conftest.err >&5
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); } &&
-- { ac_try='test -z "$ac_c_werror_flag"
-- || test ! -s conftest.err'
-+ { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err'
- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
- (eval $ac_try) 2>&5
- ac_status=$?
-@@ -3656,8 +3648,7 @@ if { (eval echo "$as_me:$LINENO: \"$ac_c
- cat conftest.err >&5
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); } &&
-- { ac_try='test -z "$ac_c_werror_flag"
-- || test ! -s conftest.err'
-+ { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err'
- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
- (eval $ac_try) 2>&5
- ac_status=$?
-@@ -4095,8 +4086,7 @@ if { (eval echo "$as_me:$LINENO: \"$ac_l
- cat conftest.err >&5
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); } &&
-- { ac_try='test -z "$ac_c_werror_flag"
-- || test ! -s conftest.err'
-+ { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err'
- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
- (eval $ac_try) 2>&5
- ac_status=$?
-@@ -4161,8 +4151,7 @@ if { (eval echo "$as_me:$LINENO: \"$ac_l
- cat conftest.err >&5
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); } &&
-- { ac_try='test -z "$ac_c_werror_flag"
-- || test ! -s conftest.err'
-+ { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err'
- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
- (eval $ac_try) 2>&5
- ac_status=$?
-@@ -4234,8 +4223,7 @@ if { (eval echo "$as_me:$LINENO: \"$ac_l
- cat conftest.err >&5
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); } &&
-- { ac_try='test -z "$ac_c_werror_flag"
-- || test ! -s conftest.err'
-+ { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err'
- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
- (eval $ac_try) 2>&5
- ac_status=$?
-@@ -4300,8 +4288,7 @@ if { (eval echo "$as_me:$LINENO: \"$ac_l
- cat conftest.err >&5
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); } &&
-- { ac_try='test -z "$ac_c_werror_flag"
-- || test ! -s conftest.err'
-+ { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err'
- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
- (eval $ac_try) 2>&5
- ac_status=$?
-@@ -4366,8 +4353,7 @@ if { (eval echo "$as_me:$LINENO: \"$ac_l
- cat conftest.err >&5
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); } &&
-- { ac_try='test -z "$ac_c_werror_flag"
-- || test ! -s conftest.err'
-+ { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err'
- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
- (eval $ac_try) 2>&5
- ac_status=$?
-@@ -4440,8 +4426,7 @@ if { (eval echo "$as_me:$LINENO: \"$ac_l
- cat conftest.err >&5
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); } &&
-- { ac_try='test -z "$ac_c_werror_flag"
-- || test ! -s conftest.err'
-+ { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err'
- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
- (eval $ac_try) 2>&5
- ac_status=$?
-@@ -4506,8 +4491,7 @@ if { (eval echo "$as_me:$LINENO: \"$ac_l
- cat conftest.err >&5
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); } &&
-- { ac_try='test -z "$ac_c_werror_flag"
-- || test ! -s conftest.err'
-+ { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err'
- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
- (eval $ac_try) 2>&5
- ac_status=$?
-@@ -4597,8 +4581,7 @@ if { (eval echo "$as_me:$LINENO: \"$ac_l
- cat conftest.err >&5
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); } &&
-- { ac_try='test -z "$ac_c_werror_flag"
-- || test ! -s conftest.err'
-+ { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err'
- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
- (eval $ac_try) 2>&5
- ac_status=$?
-@@ -4673,8 +4656,7 @@ if { (eval echo "$as_me:$LINENO: \"$ac_l
- cat conftest.err >&5
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); } &&
-- { ac_try='test -z "$ac_c_werror_flag"
-- || test ! -s conftest.err'
-+ { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err'
- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
- (eval $ac_try) 2>&5
- ac_status=$?
-@@ -4745,8 +4727,7 @@ if { (eval echo "$as_me:$LINENO: \"$ac_l
- cat conftest.err >&5
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); } &&
-- { ac_try='test -z "$ac_c_werror_flag"
-- || test ! -s conftest.err'
-+ { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err'
- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
- (eval $ac_try) 2>&5
- ac_status=$?
-@@ -5070,8 +5051,7 @@ if { (eval echo "$as_me:$LINENO: \"$ac_c
- cat conftest.err >&5
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); } &&
-- { ac_try='test -z "$ac_c_werror_flag"
-- || test ! -s conftest.err'
-+ { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err'
- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
- (eval $ac_try) 2>&5
- ac_status=$?
-@@ -5241,8 +5221,7 @@ if { (eval echo "$as_me:$LINENO: \"$ac_c
- cat conftest.err >&5
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); } &&
-- { ac_try='test -z "$ac_c_werror_flag"
-- || test ! -s conftest.err'
-+ { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err'
- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
- (eval $ac_try) 2>&5
- ac_status=$?
-@@ -5313,8 +5292,7 @@ if { (eval echo "$as_me:$LINENO: \"$ac_c
- cat conftest.err >&5
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); } &&
-- { ac_try='test -z "$ac_c_werror_flag"
-- || test ! -s conftest.err'
-+ { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err'
- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
- (eval $ac_try) 2>&5
- ac_status=$?
-@@ -5966,6 +5944,22 @@ else
- fi
-
-
-+# Check whether --enable-graphics or --disable-graphics was given.
-+if test "${enable_graphics+set}" = set; then
-+ enableval="$enable_graphics"
-+
-+fi;
-+
-+
-+if test "x$enable_graphics" != xno; then
-+ GRAPHICS_SUPPORT_TRUE=
-+ GRAPHICS_SUPPORT_FALSE='#'
-+else
-+ GRAPHICS_SUPPORT_TRUE='#'
-+ GRAPHICS_SUPPORT_FALSE=
-+fi
-+
-+
- # Check whether --enable-hercules or --disable-hercules was given.
- if test "${enable_hercules+set}" = set; then
- enableval="$enable_hercules"
-@@ -6270,6 +6264,13 @@ echo "$as_me: error: conditional \"DISKL
- Usually this means the macro was only invoked conditionally." >&2;}
- { (exit 1); exit 1; }; }
- fi
-+if test -z "${GRAPHICS_SUPPORT_TRUE}" && test -z "${GRAPHICS_SUPPORT_FALSE}"; then
-+ { { echo "$as_me:$LINENO: error: conditional \"GRAPHICS_SUPPORT\" was never defined.
-+Usually this means the macro was only invoked conditionally." >&5
-+echo "$as_me: error: conditional \"GRAPHICS_SUPPORT\" was never defined.
-+Usually this means the macro was only invoked conditionally." >&2;}
-+ { (exit 1); exit 1; }; }
-+fi
- if test -z "${HERCULES_SUPPORT_TRUE}" && test -z "${HERCULES_SUPPORT_FALSE}"; then
- { { echo "$as_me:$LINENO: error: conditional \"HERCULES_SUPPORT\" was never defined.
- Usually this means the macro was only invoked conditionally." >&5
-@@ -6907,6 +6908,8 @@ s,@NETBOOT_SUPPORT_TRUE@,$NETBOOT_SUPPOR
- s,@NETBOOT_SUPPORT_FALSE@,$NETBOOT_SUPPORT_FALSE,;t t
- s,@DISKLESS_SUPPORT_TRUE@,$DISKLESS_SUPPORT_TRUE,;t t
- s,@DISKLESS_SUPPORT_FALSE@,$DISKLESS_SUPPORT_FALSE,;t t
-+s,@GRAPHICS_SUPPORT_TRUE@,$GRAPHICS_SUPPORT_TRUE,;t t
-+s,@GRAPHICS_SUPPORT_FALSE@,$GRAPHICS_SUPPORT_FALSE,;t t
- s,@HERCULES_SUPPORT_TRUE@,$HERCULES_SUPPORT_TRUE,;t t
- s,@HERCULES_SUPPORT_FALSE@,$HERCULES_SUPPORT_FALSE,;t t
- s,@SERIAL_SUPPORT_TRUE@,$SERIAL_SUPPORT_TRUE,;t t
-@@ -7088,11 +7091,6 @@ esac
- *) ac_INSTALL=$ac_top_builddir$INSTALL ;;
- esac
-
-- if test x"$ac_file" != x-; then
-- { echo "$as_me:$LINENO: creating $ac_file" >&5
--echo "$as_me: creating $ac_file" >&6;}
-- rm -f "$ac_file"
-- fi
- # Let's still pretend it is `configure' which instantiates (i.e., don't
- # use $as_me), people would be surprised to read:
- # /* config.h. Generated by config.status. */
-@@ -7131,6 +7129,12 @@ echo "$as_me: error: cannot find input f
- fi;;
- esac
- done` || { (exit 1); exit 1; }
-+
-+ if test x"$ac_file" != x-; then
-+ { echo "$as_me:$LINENO: creating $ac_file" >&5
-+echo "$as_me: creating $ac_file" >&6;}
-+ rm -f "$ac_file"
-+ fi
- _ACEOF
- cat >>$CONFIG_STATUS <<_ACEOF
- sed "$ac_vpsub
-diff -rup grub-0.97.oorig/docs/Makefile.in grub-0.97/docs/Makefile.in
---- grub-0.97.oorig/docs/Makefile.in 2005-05-08 04:42:34.000000000 +0200
-+++ grub-0.97/docs/Makefile.in 2006-03-12 14:00:43.000000000 +0100
-@@ -1,8 +1,8 @@
--# Makefile.in generated by automake 1.9.4 from Makefile.am.
-+# Makefile.in generated by automake 1.9.6 from Makefile.am.
- # @configure_input@
-
- # Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002,
--# 2003, 2004 Free Software Foundation, Inc.
-+# 2003, 2004, 2005 Free Software Foundation, Inc.
- # This Makefile.in is free software; the Free Software Foundation
- # gives unlimited permission to copy and/or distribute it,
- # with or without modifications, as long as this notice is preserved.
-@@ -15,8 +15,6 @@
- @SET_MAKE@
-
-
--SOURCES = $(kernel_SOURCES)
--
- srcdir = @srcdir@
- top_srcdir = @top_srcdir@
- VPATH = @srcdir@
-@@ -120,6 +118,8 @@ ECHO_T = @ECHO_T@
- EGREP = @EGREP@
- EXEEXT = @EXEEXT@
- FSYS_CFLAGS = @FSYS_CFLAGS@
-+GRAPHICS_SUPPORT_FALSE = @GRAPHICS_SUPPORT_FALSE@
-+GRAPHICS_SUPPORT_TRUE = @GRAPHICS_SUPPORT_TRUE@
- GRUB_CFLAGS = @GRUB_CFLAGS@
- GRUB_LIBS = @GRUB_LIBS@
- HERCULES_SUPPORT_FALSE = @HERCULES_SUPPORT_FALSE@
-@@ -304,9 +304,11 @@ kernel-kernel.obj: kernel.c
- restore=: && backupdir="$(am__leading_dot)am$$$$" && \
- am__cwd=`pwd` && cd $(srcdir) && \
- rm -rf $$backupdir && mkdir $$backupdir && \
-- for f in $@ $@-[0-9] $@-[0-9][0-9] $(@:.info=).i[0-9] $(@:.info=).i[0-9][0-9]; do \
-- if test -f $$f; then mv $$f $$backupdir; restore=mv; else :; fi; \
-- done; \
-+ if ($(MAKEINFO) --version) >/dev/null 2>&1; then \
-+ for f in $@ $@-[0-9] $@-[0-9][0-9] $(@:.info=).i[0-9] $(@:.info=).i[0-9][0-9]; do \
-+ if test -f $$f; then mv $$f $$backupdir; restore=mv; else :; fi; \
-+ done; \
-+ else :; fi && \
- cd "$$am__cwd"; \
- if $(MAKEINFO) $(AM_MAKEINFOFLAGS) $(MAKEINFOFLAGS) -I $(srcdir) \
- -o $@ $<; \
-@@ -371,10 +373,11 @@ multiboot.dvi: multiboot.texi $(multiboo
- multiboot.pdf: multiboot.texi $(multiboot_TEXINFOS)
- multiboot.html: multiboot.texi $(multiboot_TEXINFOS)
- .dvi.ps:
-+ TEXINPUTS="$(am__TEXINFO_TEX_DIR)$(PATH_SEPARATOR)$$TEXINPUTS" \
- $(DVIPS) -o $@ $<
-
- uninstall-info-am:
-- $(PRE_UNINSTALL)
-+ @$(PRE_UNINSTALL)
- @if (install-info --version && \
- install-info --version 2>&1 | sed 1q | grep -i -v debian) >/dev/null 2>&1; then \
- list='$(INFO_DEPS)'; \
-@@ -390,7 +393,7 @@ uninstall-info-am:
- relfile=`echo "$$file" | sed 's|^.*/||'`; \
- relfile_i=`echo "$$relfile" | sed 's|\.info$$||;s|$$|.i|'`; \
- (if cd "$(DESTDIR)$(infodir)"; then \
-- echo " rm -f $$relfile $$relfile-[0-9] $$relfile-[0-9][0-9] $$relfile_i[0-9] $$relfile_i[0-9][0-9])"; \
-+ echo " cd '$(DESTDIR)$(infodir)' && rm -f $$relfile $$relfile-[0-9] $$relfile-[0-9][0-9] $$relfile_i[0-9] $$relfile_i[0-9][0-9]"; \
- rm -f $$relfile $$relfile-[0-9] $$relfile-[0-9][0-9] $$relfile_i[0-9] $$relfile_i[0-9][0-9]; \
- else :; fi); \
- done
-@@ -403,10 +406,13 @@ dist-info: $(INFO_DEPS)
- $(srcdir)/*) base=`echo "$$base" | sed "s|^$$srcdirstrip/||"`;; \
- esac; \
- if test -f $$base; then d=.; else d=$(srcdir); fi; \
-- for file in $$d/$$base*; do \
-- relfile=`expr "$$file" : "$$d/\(.*\)"`; \
-- test -f $(distdir)/$$relfile || \
-- cp -p $$file $(distdir)/$$relfile; \
-+ base_i=`echo "$$base" | sed 's|\.info$$||;s|$$|.i|'`; \
-+ for file in $$d/$$base $$d/$$base-[0-9] $$d/$$base-[0-9][0-9] $$d/$$base_i[0-9] $$d/$$base_i[0-9][0-9]; do \
-+ if test -f $$file; then \
-+ relfile=`expr "$$file" : "$$d/\(.*\)"`; \
-+ test -f $(distdir)/$$relfile || \
-+ cp -p $$file $(distdir)/$$relfile; \
-+ else :; fi; \
- done; \
- done
-
-diff -rup grub-0.97.oorig/grub/Makefile.in grub-0.97/grub/Makefile.in
---- grub-0.97.oorig/grub/Makefile.in 2005-05-08 04:42:34.000000000 +0200
-+++ grub-0.97/grub/Makefile.in 2006-03-12 14:00:43.000000000 +0100
-@@ -1,8 +1,8 @@
--# Makefile.in generated by automake 1.9.4 from Makefile.am.
-+# Makefile.in generated by automake 1.9.6 from Makefile.am.
- # @configure_input@
-
- # Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002,
--# 2003, 2004 Free Software Foundation, Inc.
-+# 2003, 2004, 2005 Free Software Foundation, Inc.
- # This Makefile.in is free software; the Free Software Foundation
- # gives unlimited permission to copy and/or distribute it,
- # with or without modifications, as long as this notice is preserved.
-@@ -14,8 +14,6 @@
-
- @SET_MAKE@
-
--SOURCES = $(grub_SOURCES)
--
- srcdir = @srcdir@
- top_srcdir = @top_srcdir@
- VPATH = @srcdir@
-@@ -97,6 +95,8 @@ ECHO_T = @ECHO_T@
- EGREP = @EGREP@
- EXEEXT = @EXEEXT@
- FSYS_CFLAGS = @FSYS_CFLAGS@
-+GRAPHICS_SUPPORT_FALSE = @GRAPHICS_SUPPORT_FALSE@
-+GRAPHICS_SUPPORT_TRUE = @GRAPHICS_SUPPORT_TRUE@
- GRUB_CFLAGS = @GRUB_CFLAGS@
- GRUB_LIBS = @GRUB_LIBS@
- HERCULES_SUPPORT_FALSE = @HERCULES_SUPPORT_FALSE@
-diff -rup grub-0.97.oorig/lib/Makefile.in grub-0.97/lib/Makefile.in
---- grub-0.97.oorig/lib/Makefile.in 2005-05-08 04:42:35.000000000 +0200
-+++ grub-0.97/lib/Makefile.in 2006-03-12 14:00:44.000000000 +0100
-@@ -1,8 +1,8 @@
--# Makefile.in generated by automake 1.9.4 from Makefile.am.
-+# Makefile.in generated by automake 1.9.6 from Makefile.am.
- # @configure_input@
-
- # Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002,
--# 2003, 2004 Free Software Foundation, Inc.
-+# 2003, 2004, 2005 Free Software Foundation, Inc.
- # This Makefile.in is free software; the Free Software Foundation
- # gives unlimited permission to copy and/or distribute it,
- # with or without modifications, as long as this notice is preserved.
-@@ -14,8 +14,6 @@
-
- @SET_MAKE@
-
--SOURCES = $(libcommon_a_SOURCES)
--
- srcdir = @srcdir@
- top_srcdir = @top_srcdir@
- VPATH = @srcdir@
-@@ -96,6 +94,8 @@ ECHO_T = @ECHO_T@
- EGREP = @EGREP@
- EXEEXT = @EXEEXT@
- FSYS_CFLAGS = @FSYS_CFLAGS@
-+GRAPHICS_SUPPORT_FALSE = @GRAPHICS_SUPPORT_FALSE@
-+GRAPHICS_SUPPORT_TRUE = @GRAPHICS_SUPPORT_TRUE@
- GRUB_CFLAGS = @GRUB_CFLAGS@
- GRUB_LIBS = @GRUB_LIBS@
- HERCULES_SUPPORT_FALSE = @HERCULES_SUPPORT_FALSE@
-diff -rup grub-0.97.oorig/Makefile.in grub-0.97/Makefile.in
---- grub-0.97.oorig/Makefile.in 2005-05-08 04:42:40.000000000 +0200
-+++ grub-0.97/Makefile.in 2006-03-12 14:00:49.000000000 +0100
-@@ -1,8 +1,8 @@
--# Makefile.in generated by automake 1.9.4 from Makefile.am.
-+# Makefile.in generated by automake 1.9.6 from Makefile.am.
- # @configure_input@
-
- # Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002,
--# 2003, 2004 Free Software Foundation, Inc.
-+# 2003, 2004, 2005 Free Software Foundation, Inc.
- # This Makefile.in is free software; the Free Software Foundation
- # gives unlimited permission to copy and/or distribute it,
- # with or without modifications, as long as this notice is preserved.
-@@ -101,6 +101,8 @@ ECHO_T = @ECHO_T@
- EGREP = @EGREP@
- EXEEXT = @EXEEXT@
- FSYS_CFLAGS = @FSYS_CFLAGS@
-+GRAPHICS_SUPPORT_FALSE = @GRAPHICS_SUPPORT_FALSE@
-+GRAPHICS_SUPPORT_TRUE = @GRAPHICS_SUPPORT_TRUE@
- GRUB_CFLAGS = @GRUB_CFLAGS@
- GRUB_LIBS = @GRUB_LIBS@
- HERCULES_SUPPORT_FALSE = @HERCULES_SUPPORT_FALSE@
-@@ -250,7 +252,13 @@ uninstall-info-am:
- # (which will cause the Makefiles to be regenerated when you run `make');
- # (2) otherwise, pass the desired values on the `make' command line.
- $(RECURSIVE_TARGETS):
-- @set fnord $$MAKEFLAGS; amf=$$2; \
-+ @failcom='exit 1'; \
-+ for f in x $$MAKEFLAGS; do \
-+ case $$f in \
-+ *=* | --[!k]*);; \
-+ *k*) failcom='fail=yes';; \
-+ esac; \
-+ done; \
- dot_seen=no; \
- target=`echo $@ | sed s/-recursive//`; \
- list='$(SUBDIRS)'; for subdir in $$list; do \
-@@ -262,7 +270,7 @@ $(RECURSIVE_TARGETS):
- local_target="$$target"; \
- fi; \
- (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
-- || case "$$amf" in *=*) exit 1;; *k*) fail=yes;; *) exit 1;; esac; \
-+ || eval $$failcom; \
- done; \
- if test "$$dot_seen" = "no"; then \
- $(MAKE) $(AM_MAKEFLAGS) "$$target-am" || exit 1; \
-@@ -270,7 +278,13 @@ $(RECURSIVE_TARGETS):
-
- mostlyclean-recursive clean-recursive distclean-recursive \
- maintainer-clean-recursive:
-- @set fnord $$MAKEFLAGS; amf=$$2; \
-+ @failcom='exit 1'; \
-+ for f in x $$MAKEFLAGS; do \
-+ case $$f in \
-+ *=* | --[!k]*);; \
-+ *k*) failcom='fail=yes';; \
-+ esac; \
-+ done; \
- dot_seen=no; \
- case "$@" in \
- distclean-* | maintainer-clean-*) list='$(DIST_SUBDIRS)' ;; \
-@@ -291,7 +305,7 @@ maintainer-clean-recursive:
- local_target="$$target"; \
- fi; \
- (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
-- || case "$$amf" in *=*) exit 1;; *k*) fail=yes;; *) exit 1;; esac; \
-+ || eval $$failcom; \
- done && test -z "$$fail"
- tags-recursive:
- list='$(SUBDIRS)'; for subdir in $$list; do \
-diff -rup grub-0.97.oorig/netboot/Makefile.in grub-0.97/netboot/Makefile.in
---- grub-0.97.oorig/netboot/Makefile.in 2005-05-08 04:42:35.000000000 +0200
-+++ grub-0.97/netboot/Makefile.in 2006-03-12 14:00:44.000000000 +0100
-@@ -1,8 +1,8 @@
--# Makefile.in generated by automake 1.9.4 from Makefile.am.
-+# Makefile.in generated by automake 1.9.6 from Makefile.am.
- # @configure_input@
-
- # Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002,
--# 2003, 2004 Free Software Foundation, Inc.
-+# 2003, 2004, 2005 Free Software Foundation, Inc.
- # This Makefile.in is free software; the Free Software Foundation
- # gives unlimited permission to copy and/or distribute it,
- # with or without modifications, as long as this notice is preserved.
-@@ -14,8 +14,6 @@
-
- @SET_MAKE@
-
--SOURCES = $(libdrivers_a_SOURCES) $(EXTRA_libdrivers_a_SOURCES)
--
- srcdir = @srcdir@
- top_srcdir = @top_srcdir@
- VPATH = @srcdir@
-@@ -97,6 +95,8 @@ ECHO_T = @ECHO_T@
- EGREP = @EGREP@
- EXEEXT = @EXEEXT@
- FSYS_CFLAGS = @FSYS_CFLAGS@
-+GRAPHICS_SUPPORT_FALSE = @GRAPHICS_SUPPORT_FALSE@
-+GRAPHICS_SUPPORT_TRUE = @GRAPHICS_SUPPORT_TRUE@
- GRUB_CFLAGS = @GRUB_CFLAGS@
- GRUB_LIBS = @GRUB_LIBS@
- HERCULES_SUPPORT_FALSE = @HERCULES_SUPPORT_FALSE@
-diff -rup grub-0.97.oorig/stage1/Makefile.in grub-0.97/stage1/Makefile.in
---- grub-0.97.oorig/stage1/Makefile.in 2005-05-08 04:42:36.000000000 +0200
-+++ grub-0.97/stage1/Makefile.in 2006-03-12 14:00:45.000000000 +0100
-@@ -1,8 +1,8 @@
--# Makefile.in generated by automake 1.9.4 from Makefile.am.
-+# Makefile.in generated by automake 1.9.6 from Makefile.am.
- # @configure_input@
-
- # Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002,
--# 2003, 2004 Free Software Foundation, Inc.
-+# 2003, 2004, 2005 Free Software Foundation, Inc.
- # This Makefile.in is free software; the Free Software Foundation
- # gives unlimited permission to copy and/or distribute it,
- # with or without modifications, as long as this notice is preserved.
-@@ -15,8 +15,6 @@
- @SET_MAKE@
-
-
--SOURCES = $(stage1_exec_SOURCES)
--
- srcdir = @srcdir@
- top_srcdir = @top_srcdir@
- VPATH = @srcdir@
-@@ -102,6 +100,8 @@ ECHO_T = @ECHO_T@
- EGREP = @EGREP@
- EXEEXT = @EXEEXT@
- FSYS_CFLAGS = @FSYS_CFLAGS@
-+GRAPHICS_SUPPORT_FALSE = @GRAPHICS_SUPPORT_FALSE@
-+GRAPHICS_SUPPORT_TRUE = @GRAPHICS_SUPPORT_TRUE@
- GRUB_CFLAGS = @GRUB_CFLAGS@
- GRUB_LIBS = @GRUB_LIBS@
- HERCULES_SUPPORT_FALSE = @HERCULES_SUPPORT_FALSE@
-diff -rup grub-0.97.oorig/stage2/Makefile.in grub-0.97/stage2/Makefile.in
---- grub-0.97.oorig/stage2/Makefile.in 2005-05-08 04:42:39.000000000 +0200
-+++ grub-0.97/stage2/Makefile.in 2006-03-12 14:00:48.000000000 +0100
-@@ -1,8 +1,8 @@
--# Makefile.in generated by automake 1.9.4 from Makefile.am.
-+# Makefile.in generated by automake 1.9.6 from Makefile.am.
- # @configure_input@
-
- # Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002,
--# 2003, 2004 Free Software Foundation, Inc.
-+# 2003, 2004, 2005 Free Software Foundation, Inc.
- # This Makefile.in is free software; the Free Software Foundation
- # gives unlimited permission to copy and/or distribute it,
- # with or without modifications, as long as this notice is preserved.
-@@ -18,8 +18,6 @@
-
-
-
--SOURCES = $(libgrub_a_SOURCES) $(diskless_exec_SOURCES) $(e2fs_stage1_5_exec_SOURCES) $(fat_stage1_5_exec_SOURCES) $(ffs_stage1_5_exec_SOURCES) $(iso9660_stage1_5_exec_SOURCES) $(jfs_stage1_5_exec_SOURCES) $(minix_stage1_5_exec_SOURCES) $(nbloader_exec_SOURCES) $(pre_stage2_exec_SOURCES) $(pxeloader_exec_SOURCES) $(reiserfs_stage1_5_exec_SOURCES) $(start_exec_SOURCES) $(start_eltorito_exec_SOURCES) $(ufs2_stage1_5_exec_SOURCES) $(vstafs_stage1_5_exec_SOURCES) $(xfs_stage1_5_exec_SOURCES)
--
- srcdir = @srcdir@
- top_srcdir = @top_srcdir@
- VPATH = @srcdir@
-@@ -100,7 +98,7 @@ am_libgrub_a_OBJECTS = libgrub_a-boot.$(
- libgrub_a-fsys_xfs.$(OBJEXT) libgrub_a-gunzip.$(OBJEXT) \
- libgrub_a-md5.$(OBJEXT) libgrub_a-serial.$(OBJEXT) \
- libgrub_a-stage2.$(OBJEXT) libgrub_a-terminfo.$(OBJEXT) \
-- libgrub_a-tparm.$(OBJEXT)
-+ libgrub_a-tparm.$(OBJEXT) libgrub_a-graphics.$(OBJEXT)
- libgrub_a_OBJECTS = $(am_libgrub_a_OBJECTS)
- PROGRAMS = $(noinst_PROGRAMS)
- am__objects_1 = diskless_exec-asm.$(OBJEXT) \
-@@ -125,7 +123,8 @@ am__objects_1 = diskless_exec-asm.$(OBJE
- diskless_exec-serial.$(OBJEXT) \
- diskless_exec-smp-imps.$(OBJEXT) \
- diskless_exec-stage2.$(OBJEXT) \
-- diskless_exec-terminfo.$(OBJEXT) diskless_exec-tparm.$(OBJEXT)
-+ diskless_exec-terminfo.$(OBJEXT) diskless_exec-tparm.$(OBJEXT) \
-+ diskless_exec-graphics.$(OBJEXT)
- am_diskless_exec_OBJECTS = $(am__objects_1)
- diskless_exec_OBJECTS = $(am_diskless_exec_OBJECTS)
- diskless_exec_DEPENDENCIES = ../netboot/libdrivers.a
-@@ -217,7 +216,8 @@ am_pre_stage2_exec_OBJECTS = pre_stage2_
- pre_stage2_exec-smp-imps.$(OBJEXT) \
- pre_stage2_exec-stage2.$(OBJEXT) \
- pre_stage2_exec-terminfo.$(OBJEXT) \
-- pre_stage2_exec-tparm.$(OBJEXT)
-+ pre_stage2_exec-tparm.$(OBJEXT) \
-+ pre_stage2_exec-graphics.$(OBJEXT)
- pre_stage2_exec_OBJECTS = $(am_pre_stage2_exec_OBJECTS)
- @NETBOOT_SUPPORT_TRUE@pre_stage2_exec_DEPENDENCIES = \
- @NETBOOT_SUPPORT_TRUE@ ../netboot/libdrivers.a
-@@ -344,6 +344,8 @@ ECHO_T = @ECHO_T@
- EGREP = @EGREP@
- EXEEXT = @EXEEXT@
- FSYS_CFLAGS = @FSYS_CFLAGS@
-+GRAPHICS_SUPPORT_FALSE = @GRAPHICS_SUPPORT_FALSE@
-+GRAPHICS_SUPPORT_TRUE = @GRAPHICS_SUPPORT_TRUE@
- GRUB_CFLAGS = @GRUB_CFLAGS@
- GRUB_LIBS = @GRUB_LIBS@
- HERCULES_SUPPORT_FALSE = @HERCULES_SUPPORT_FALSE@
-@@ -435,7 +437,7 @@ noinst_HEADERS = apic.h defs.h dir.h dis
- fat.h filesys.h freebsd.h fs.h hercules.h i386-elf.h \
- imgact_aout.h iso9660.h jfs.h mb_header.h mb_info.h md5.h \
- nbi.h pc_slice.h serial.h shared.h smp-imps.h term.h \
-- terminfo.h tparm.h nbi.h ufs2.h vstafs.h xfs.h
-+ terminfo.h tparm.h nbi.h ufs2.h vstafs.h xfs.h graphics.h
-
- EXTRA_DIST = setjmp.S apm.S $(noinst_SCRIPTS)
-
-@@ -448,7 +450,7 @@ libgrub_a_SOURCES = boot.c builtins.c ch
- disk_io.c fsys_ext2fs.c fsys_fat.c fsys_ffs.c fsys_iso9660.c \
- fsys_jfs.c fsys_minix.c fsys_reiserfs.c fsys_ufs2.c \
- fsys_vstafs.c fsys_xfs.c gunzip.c md5.c serial.c stage2.c \
-- terminfo.c tparm.c
-+ terminfo.c tparm.c graphics.c
-
- libgrub_a_CFLAGS = $(GRUB_CFLAGS) -I$(top_srcdir)/lib \
- -DGRUB_UTIL=1 -DFSYS_EXT2FS=1 -DFSYS_FAT=1 -DFSYS_FFS=1 \
-@@ -479,8 +481,10 @@ START_ELTORITO_LINK = -nostdlib -Wl,-N -
- @SERIAL_SUPPORT_TRUE@SERIAL_FLAGS = -DSUPPORT_SERIAL=1
- @HERCULES_SUPPORT_FALSE@HERCULES_FLAGS =
- @HERCULES_SUPPORT_TRUE@HERCULES_FLAGS = -DSUPPORT_HERCULES=1
-+@GRAPHICS_SUPPORT_FALSE@GRAPHICS_FLAGS =
-+@GRAPHICS_SUPPORT_TRUE@GRAPHICS_FLAGS = -DSUPPORT_GRAPHICS=1
- STAGE2_COMPILE = $(STAGE2_CFLAGS) -fno-builtin -nostdinc \
-- $(NETBOOT_FLAGS) $(SERIAL_FLAGS) $(HERCULES_FLAGS)
-+ $(NETBOOT_FLAGS) $(SERIAL_FLAGS) $(HERCULES_FLAGS) $(GRAPHICS_FLAGS)
-
- STAGE1_5_LINK = -nostdlib -Wl,-N -Wl,-Ttext -Wl,2000
- STAGE1_5_COMPILE = $(STAGE2_COMPILE) -DNO_DECOMPRESSION=1 -DSTAGE1_5=1
-@@ -490,7 +494,8 @@ pre_stage2_exec_SOURCES = asm.S bios.c b
- cmdline.c common.c console.c disk_io.c fsys_ext2fs.c \
- fsys_fat.c fsys_ffs.c fsys_iso9660.c fsys_jfs.c fsys_minix.c \
- fsys_reiserfs.c fsys_ufs2.c fsys_vstafs.c fsys_xfs.c gunzip.c \
-- hercules.c md5.c serial.c smp-imps.c stage2.c terminfo.c tparm.c
-+ hercules.c md5.c serial.c smp-imps.c stage2.c terminfo.c tparm.c \
-+ graphics.c
-
- pre_stage2_exec_CFLAGS = $(STAGE2_COMPILE) $(FSYS_CFLAGS)
- pre_stage2_exec_CCASFLAGS = $(STAGE2_COMPILE) $(FSYS_CFLAGS)
-@@ -766,6 +771,7 @@ distclean-compile:
- @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/diskless_exec-fsys_ufs2.Po@am__quote@
- @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/diskless_exec-fsys_vstafs.Po@am__quote@
- @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/diskless_exec-fsys_xfs.Po@am__quote@
-+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/diskless_exec-graphics.Po@am__quote@
- @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/diskless_exec-gunzip.Po@am__quote@
- @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/diskless_exec-hercules.Po@am__quote@
- @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/diskless_exec-md5.Po@am__quote@
-@@ -820,6 +826,7 @@ distclean-compile:
- @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/libgrub_a-fsys_ufs2.Po@am__quote@
- @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/libgrub_a-fsys_vstafs.Po@am__quote@
- @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/libgrub_a-fsys_xfs.Po@am__quote@
-+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/libgrub_a-graphics.Po@am__quote@
- @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/libgrub_a-gunzip.Po@am__quote@
- @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/libgrub_a-md5.Po@am__quote@
- @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/libgrub_a-serial.Po@am__quote@
-@@ -850,6 +857,7 @@ distclean-compile:
- @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/pre_stage2_exec-fsys_ufs2.Po@am__quote@
- @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/pre_stage2_exec-fsys_vstafs.Po@am__quote@
- @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/pre_stage2_exec-fsys_xfs.Po@am__quote@
-+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/pre_stage2_exec-graphics.Po@am__quote@
- @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/pre_stage2_exec-gunzip.Po@am__quote@
- @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/pre_stage2_exec-hercules.Po@am__quote@
- @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/pre_stage2_exec-md5.Po@am__quote@
-@@ -1367,6 +1375,20 @@ libgrub_a-tparm.obj: tparm.c
- @AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
- @am__fastdepCC_FALSE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(libgrub_a_CFLAGS) $(CFLAGS) -c -o libgrub_a-tparm.obj `if test -f 'tparm.c'; then $(CYGPATH_W) 'tparm.c'; else $(CYGPATH_W) '$(srcdir)/tparm.c'; fi`
-
-+libgrub_a-graphics.o: graphics.c
-+@am__fastdepCC_TRUE@ if $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(libgrub_a_CFLAGS) $(CFLAGS) -MT libgrub_a-graphics.o -MD -MP -MF "$(DEPDIR)/libgrub_a-graphics.Tpo" -c -o libgrub_a-graphics.o `test -f 'graphics.c' || echo '$(srcdir)/'`graphics.c; \
-+@am__fastdepCC_TRUE@ then mv -f "$(DEPDIR)/libgrub_a-graphics.Tpo" "$(DEPDIR)/libgrub_a-graphics.Po"; else rm -f "$(DEPDIR)/libgrub_a-graphics.Tpo"; exit 1; fi
-+@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='graphics.c' object='libgrub_a-graphics.o' libtool=no @AMDEPBACKSLASH@
-+@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
-+@am__fastdepCC_FALSE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(libgrub_a_CFLAGS) $(CFLAGS) -c -o libgrub_a-graphics.o `test -f 'graphics.c' || echo '$(srcdir)/'`graphics.c
-+
-+libgrub_a-graphics.obj: graphics.c
-+@am__fastdepCC_TRUE@ if $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(libgrub_a_CFLAGS) $(CFLAGS) -MT libgrub_a-graphics.obj -MD -MP -MF "$(DEPDIR)/libgrub_a-graphics.Tpo" -c -o libgrub_a-graphics.obj `if test -f 'graphics.c'; then $(CYGPATH_W) 'graphics.c'; else $(CYGPATH_W) '$(srcdir)/graphics.c'; fi`; \
-+@am__fastdepCC_TRUE@ then mv -f "$(DEPDIR)/libgrub_a-graphics.Tpo" "$(DEPDIR)/libgrub_a-graphics.Po"; else rm -f "$(DEPDIR)/libgrub_a-graphics.Tpo"; exit 1; fi
-+@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='graphics.c' object='libgrub_a-graphics.obj' libtool=no @AMDEPBACKSLASH@
-+@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
-+@am__fastdepCC_FALSE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(libgrub_a_CFLAGS) $(CFLAGS) -c -o libgrub_a-graphics.obj `if test -f 'graphics.c'; then $(CYGPATH_W) 'graphics.c'; else $(CYGPATH_W) '$(srcdir)/graphics.c'; fi`
-+
- diskless_exec-bios.o: bios.c
- @am__fastdepCC_TRUE@ if $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(diskless_exec_CFLAGS) $(CFLAGS) -MT diskless_exec-bios.o -MD -MP -MF "$(DEPDIR)/diskless_exec-bios.Tpo" -c -o diskless_exec-bios.o `test -f 'bios.c' || echo '$(srcdir)/'`bios.c; \
- @am__fastdepCC_TRUE@ then mv -f "$(DEPDIR)/diskless_exec-bios.Tpo" "$(DEPDIR)/diskless_exec-bios.Po"; else rm -f "$(DEPDIR)/diskless_exec-bios.Tpo"; exit 1; fi
-@@ -1731,6 +1753,20 @@ diskless_exec-tparm.obj: tparm.c
- @AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
- @am__fastdepCC_FALSE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(diskless_exec_CFLAGS) $(CFLAGS) -c -o diskless_exec-tparm.obj `if test -f 'tparm.c'; then $(CYGPATH_W) 'tparm.c'; else $(CYGPATH_W) '$(srcdir)/tparm.c'; fi`
-
-+diskless_exec-graphics.o: graphics.c
-+@am__fastdepCC_TRUE@ if $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(diskless_exec_CFLAGS) $(CFLAGS) -MT diskless_exec-graphics.o -MD -MP -MF "$(DEPDIR)/diskless_exec-graphics.Tpo" -c -o diskless_exec-graphics.o `test -f 'graphics.c' || echo '$(srcdir)/'`graphics.c; \
-+@am__fastdepCC_TRUE@ then mv -f "$(DEPDIR)/diskless_exec-graphics.Tpo" "$(DEPDIR)/diskless_exec-graphics.Po"; else rm -f "$(DEPDIR)/diskless_exec-graphics.Tpo"; exit 1; fi
-+@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='graphics.c' object='diskless_exec-graphics.o' libtool=no @AMDEPBACKSLASH@
-+@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
-+@am__fastdepCC_FALSE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(diskless_exec_CFLAGS) $(CFLAGS) -c -o diskless_exec-graphics.o `test -f 'graphics.c' || echo '$(srcdir)/'`graphics.c
-+
-+diskless_exec-graphics.obj: graphics.c
-+@am__fastdepCC_TRUE@ if $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(diskless_exec_CFLAGS) $(CFLAGS) -MT diskless_exec-graphics.obj -MD -MP -MF "$(DEPDIR)/diskless_exec-graphics.Tpo" -c -o diskless_exec-graphics.obj `if test -f 'graphics.c'; then $(CYGPATH_W) 'graphics.c'; else $(CYGPATH_W) '$(srcdir)/graphics.c'; fi`; \
-+@am__fastdepCC_TRUE@ then mv -f "$(DEPDIR)/diskless_exec-graphics.Tpo" "$(DEPDIR)/diskless_exec-graphics.Po"; else rm -f "$(DEPDIR)/diskless_exec-graphics.Tpo"; exit 1; fi
-+@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='graphics.c' object='diskless_exec-graphics.obj' libtool=no @AMDEPBACKSLASH@
-+@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
-+@am__fastdepCC_FALSE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(diskless_exec_CFLAGS) $(CFLAGS) -c -o diskless_exec-graphics.obj `if test -f 'graphics.c'; then $(CYGPATH_W) 'graphics.c'; else $(CYGPATH_W) '$(srcdir)/graphics.c'; fi`
-+
- e2fs_stage1_5_exec-common.o: common.c
- @am__fastdepCC_TRUE@ if $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(e2fs_stage1_5_exec_CFLAGS) $(CFLAGS) -MT e2fs_stage1_5_exec-common.o -MD -MP -MF "$(DEPDIR)/e2fs_stage1_5_exec-common.Tpo" -c -o e2fs_stage1_5_exec-common.o `test -f 'common.c' || echo '$(srcdir)/'`common.c; \
- @am__fastdepCC_TRUE@ then mv -f "$(DEPDIR)/e2fs_stage1_5_exec-common.Tpo" "$(DEPDIR)/e2fs_stage1_5_exec-common.Po"; else rm -f "$(DEPDIR)/e2fs_stage1_5_exec-common.Tpo"; exit 1; fi
-@@ -2599,6 +2635,20 @@ pre_stage2_exec-tparm.obj: tparm.c
- @AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
- @am__fastdepCC_FALSE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(pre_stage2_exec_CFLAGS) $(CFLAGS) -c -o pre_stage2_exec-tparm.obj `if test -f 'tparm.c'; then $(CYGPATH_W) 'tparm.c'; else $(CYGPATH_W) '$(srcdir)/tparm.c'; fi`
-
-+pre_stage2_exec-graphics.o: graphics.c
-+@am__fastdepCC_TRUE@ if $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(pre_stage2_exec_CFLAGS) $(CFLAGS) -MT pre_stage2_exec-graphics.o -MD -MP -MF "$(DEPDIR)/pre_stage2_exec-graphics.Tpo" -c -o pre_stage2_exec-graphics.o `test -f 'graphics.c' || echo '$(srcdir)/'`graphics.c; \
-+@am__fastdepCC_TRUE@ then mv -f "$(DEPDIR)/pre_stage2_exec-graphics.Tpo" "$(DEPDIR)/pre_stage2_exec-graphics.Po"; else rm -f "$(DEPDIR)/pre_stage2_exec-graphics.Tpo"; exit 1; fi
-+@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='graphics.c' object='pre_stage2_exec-graphics.o' libtool=no @AMDEPBACKSLASH@
-+@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
-+@am__fastdepCC_FALSE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(pre_stage2_exec_CFLAGS) $(CFLAGS) -c -o pre_stage2_exec-graphics.o `test -f 'graphics.c' || echo '$(srcdir)/'`graphics.c
-+
-+pre_stage2_exec-graphics.obj: graphics.c
-+@am__fastdepCC_TRUE@ if $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(pre_stage2_exec_CFLAGS) $(CFLAGS) -MT pre_stage2_exec-graphics.obj -MD -MP -MF "$(DEPDIR)/pre_stage2_exec-graphics.Tpo" -c -o pre_stage2_exec-graphics.obj `if test -f 'graphics.c'; then $(CYGPATH_W) 'graphics.c'; else $(CYGPATH_W) '$(srcdir)/graphics.c'; fi`; \
-+@am__fastdepCC_TRUE@ then mv -f "$(DEPDIR)/pre_stage2_exec-graphics.Tpo" "$(DEPDIR)/pre_stage2_exec-graphics.Po"; else rm -f "$(DEPDIR)/pre_stage2_exec-graphics.Tpo"; exit 1; fi
-+@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='graphics.c' object='pre_stage2_exec-graphics.obj' libtool=no @AMDEPBACKSLASH@
-+@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
-+@am__fastdepCC_FALSE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(pre_stage2_exec_CFLAGS) $(CFLAGS) -c -o pre_stage2_exec-graphics.obj `if test -f 'graphics.c'; then $(CYGPATH_W) 'graphics.c'; else $(CYGPATH_W) '$(srcdir)/graphics.c'; fi`
-+
- reiserfs_stage1_5_exec-common.o: common.c
- @am__fastdepCC_TRUE@ if $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(reiserfs_stage1_5_exec_CFLAGS) $(CFLAGS) -MT reiserfs_stage1_5_exec-common.o -MD -MP -MF "$(DEPDIR)/reiserfs_stage1_5_exec-common.Tpo" -c -o reiserfs_stage1_5_exec-common.o `test -f 'common.c' || echo '$(srcdir)/'`common.c; \
- @am__fastdepCC_TRUE@ then mv -f "$(DEPDIR)/reiserfs_stage1_5_exec-common.Tpo" "$(DEPDIR)/reiserfs_stage1_5_exec-common.Po"; else rm -f "$(DEPDIR)/reiserfs_stage1_5_exec-common.Tpo"; exit 1; fi
-diff -rup grub-0.97.oorig/util/Makefile.in grub-0.97/util/Makefile.in
---- grub-0.97.oorig/util/Makefile.in 2005-05-08 04:42:39.000000000 +0200
-+++ grub-0.97/util/Makefile.in 2006-03-12 14:00:48.000000000 +0100
-@@ -1,8 +1,8 @@
--# Makefile.in generated by automake 1.9.4 from Makefile.am.
-+# Makefile.in generated by automake 1.9.6 from Makefile.am.
- # @configure_input@
-
- # Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002,
--# 2003, 2004 Free Software Foundation, Inc.
-+# 2003, 2004, 2005 Free Software Foundation, Inc.
- # This Makefile.in is free software; the Free Software Foundation
- # gives unlimited permission to copy and/or distribute it,
- # with or without modifications, as long as this notice is preserved.
-@@ -15,8 +15,6 @@
- @SET_MAKE@
-
-
--SOURCES = $(mbchk_SOURCES)
--
- srcdir = @srcdir@
- top_srcdir = @top_srcdir@
- VPATH = @srcdir@
-@@ -102,6 +100,8 @@ ECHO_T = @ECHO_T@
- EGREP = @EGREP@
- EXEEXT = @EXEEXT@
- FSYS_CFLAGS = @FSYS_CFLAGS@
-+GRAPHICS_SUPPORT_FALSE = @GRAPHICS_SUPPORT_FALSE@
-+GRAPHICS_SUPPORT_TRUE = @GRAPHICS_SUPPORT_TRUE@
- GRUB_CFLAGS = @GRUB_CFLAGS@
- GRUB_LIBS = @GRUB_LIBS@
- HERCULES_SUPPORT_FALSE = @HERCULES_SUPPORT_FALSE@
+++ /dev/null
---- grub-0.97.oorig/stage2/disk_io.c 2004-05-23 18:35:24.000000000 +0200
-+++ grub-0.97/stage2/disk_io.c 2006-03-12 14:11:51.000000000 +0100
-@@ -365,7 +365,7 @@ rawwrite (int drive, int sector, char *b
- int
- devwrite (int sector, int sector_count, char *buf)
- {
--#if defined(GRUB_UTIL) && defined(__linux__)
-+#if defined(GRUB_UTIL) && defined(__linux__) && !defined(SUPPORT_LOOPDEV)
- if (current_partition != 0xFFFFFF
- && is_disk_device (device_map, current_drive))
- {
+++ /dev/null
-diff -rup grub-0.97.orig/grub/asmstub.c grub-0.97/grub/asmstub.c
---- grub-0.97.orig/grub/asmstub.c 2006-11-29 20:36:20.000000000 +0100
-+++ grub-0.97/grub/asmstub.c 2006-11-29 21:26:16.000000000 +0100
-@@ -18,10 +18,13 @@
- * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
- */
-
-+#include <features.h>
-+#if !defined __UCLIBC__ || (defined __UCLIBC__ && defined __UCLIBC_HAS_LFS__)
- /* Try to use glibc's transparant LFS support. */
- #define _LARGEFILE_SOURCE 1
- /* lseek becomes synonymous with lseek64. */
- #define _FILE_OFFSET_BITS 64
-+#endif
-
- /* Simulator entry point. */
- int grub_stage2 (void);
-diff -rup grub-0.97.orig/lib/device.c grub-0.97/lib/device.c
---- grub-0.97.orig/lib/device.c 2006-11-29 20:36:20.000000000 +0100
-+++ grub-0.97/lib/device.c 2006-11-29 21:25:19.000000000 +0100
-@@ -18,10 +18,13 @@
- * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
- */
-
-+#include <features.h>
-+#if !defined __UCLIBC__ || (defined __UCLIBC__ && defined __UCLIBC_HAS_LFS__)
- /* Try to use glibc's transparant LFS support. */
- #define _LARGEFILE_SOURCE 1
- /* lseek becomes synonymous with lseek64. */
- #define _FILE_OFFSET_BITS 64
-+#endif
-
- #include <stdio.h>
- #include <stdlib.h>
+++ /dev/null
-GRUB_SUPPORTED_ARCH=n
-ifeq ($(ARCH),i386)
-GRUB_SUPPORTED_ARCH=y
-endif
-ifeq ($(ARCH),i486)
-GRUB_SUPPORTED_ARCH=y
-endif
-ifeq ($(ARCH),i586)
-GRUB_SUPPORTED_ARCH=y
-endif
-ifeq ($(ARCH),i686)
-GRUB_SUPPORTED_ARCH=y
-endif
-ifeq ($(ARCH),x86_64)
-GRUB_SUPPORTED_ARCH=y
-endif
-ifeq ($(GRUB_SUPPORTED_ARCH),y)
-#############################################################
-#
-# grub
-#
-#############################################################
-GRUB_SOURCE:=grub_0.97.orig.tar.gz
-GRUB_PATCH:=grub_0.97-35.diff.gz
-GRUB_SITE:=http://snapshot.debian.net/archive/2008/03/29/debian/pool/main/g/grub/
-GRUB_PATCH_SITE:=$(GRUB_SITE)
-GRUB_CAT:=$(ZCAT)
-GRUB_DIR:=$(BUILD_DIR)/grub-0.97
-GRUB_BINARY:=grub/grub
-GRUB_TARGET_BINARY:=sbin/grub
-GRUB_SPLASHIMAGE=$(TOPDIR)/target/x86/grub/splash.xpm.gz
-
-
-GRUB_CFLAGS=-DSUPPORT_LOOPDEV
-ifeq ($(BR2_LARGEFILE),)
-GRUB_CFLAGS+=-U_FILE_OFFSET_BITS
-endif
-
-
-GRUB_CONFIG-$(BR2_TARGET_GRUB_SPLASH) += --enable-graphics
-GRUB_CONFIG-$(BR2_TARGET_GRUB_DISKLESS) += --enable-diskless
-GRUB_CONFIG-$(BR2_TARGET_GRUB_3c595) += --enable-3c595
-GRUB_CONFIG-$(BR2_TARGET_GRUB_3c90x) += --enable-3c90x
-GRUB_CONFIG-$(BR2_TARGET_GRUB_davicom) += --enable-davicom
-GRUB_CONFIG-$(BR2_TARGET_GRUB_e1000) += --enable-e1000
-GRUB_CONFIG-$(BR2_TARGET_GRUB_eepro100) += --enable-eepro100
-GRUB_CONFIG-$(BR2_TARGET_GRUB_epic100) += --enable-epic100
-GRUB_CONFIG-$(BR2_TARGET_GRUB_forcedeth) += --enable-forcedeth
-GRUB_CONFIG-$(BR2_TARGET_GRUB_natsemi) += --enable-natsemi
-GRUB_CONFIG-$(BR2_TARGET_GRUB_ns83820) += --enable-ns83820
-GRUB_CONFIG-$(BR2_TARGET_GRUB_ns8390) += --enable-ns8390
-GRUB_CONFIG-$(BR2_TARGET_GRUB_pcnet32) += --enable-pcnet32
-GRUB_CONFIG-$(BR2_TARGET_GRUB_pnic) += --enable-pnic
-GRUB_CONFIG-$(BR2_TARGET_GRUB_rtl8139) += --enable-rtl8139
-GRUB_CONFIG-$(BR2_TARGET_GRUB_r8169) += --enable-r8169
-GRUB_CONFIG-$(BR2_TARGET_GRUB_sis900) += --enable-sis900
-GRUB_CONFIG-$(BR2_TARGET_GRUB_tg3) += --enable-tg3
-GRUB_CONFIG-$(BR2_TARGET_GRUB_tulip) += --enable-tulip
-GRUB_CONFIG-$(BR2_TARGET_GRUB_tlan) += --enable-tlan
-GRUB_CONFIG-$(BR2_TARGET_GRUB_undi) += --enable-undi
-GRUB_CONFIG-$(BR2_TARGET_GRUB_via_rhine) += --enable-via-rhine
-GRUB_CONFIG-$(BR2_TARGET_GRUB_w89c840) += --enable-w89c840
-
-$(DL_DIR)/$(GRUB_SOURCE):
- $(call DOWNLOAD,$(GRUB_SITE),$(GRUB_SOURCE))
-
-$(DL_DIR)/$(GRUB_PATCH):
- $(call DOWNLOAD,$(GRUB_PATCH_SITE),$(GRUB_PATCH))
-
-grub-source: $(DL_DIR)/$(GRUB_SOURCE) $(DL_DIR)/$(GRUB_PATCH)
-
-$(GRUB_DIR)/.unpacked: $(DL_DIR)/$(GRUB_SOURCE) $(DL_DIR)/$(GRUB_PATCH)
- $(GRUB_CAT) $(DL_DIR)/$(GRUB_SOURCE) | tar -C $(BUILD_DIR) -xvf -
- toolchain/patch-kernel.sh $(GRUB_DIR) $(DL_DIR) $(GRUB_PATCH)
- for i in `grep -v "^#" $(GRUB_DIR)/debian/patches/00list`; do \
- cat $(GRUB_DIR)/debian/patches/$$i | patch -p1 -d $(GRUB_DIR); \
- done
- toolchain/patch-kernel.sh $(GRUB_DIR) target/x86/grub grub.\*.patch{,.bz2}
- touch $@
-
-$(GRUB_DIR)/.configured: $(GRUB_DIR)/.unpacked
- (cd $(GRUB_DIR); rm -rf config.cache; \
- $(TARGET_CONFIGURE_OPTS) \
- CFLAGS="$(TARGET_CFLAGS)" \
- CPPFLAGS="$(GRUB_CFLAGS)" \
- ./configure $(QUIET) \
- --target=$(GNU_TARGET_NAME) \
- --host=$(GNU_TARGET_NAME) \
- --build=$(GNU_HOST_NAME) \
- --prefix=/ \
- --mandir=/usr/man \
- --infodir=/usr/info \
- --disable-auto-linux-mem-opt \
- $(GRUB_CONFIG-y) \
- )
- touch $@
-
-$(GRUB_DIR)/$(GRUB_BINARY): $(GRUB_DIR)/.configured
- $(MAKE) CC=$(TARGET_CC) -C $(GRUB_DIR)
- rm -f $(GRUB_DIR)/$(GRUB_BINARY)
- $(MAKE) CC=$(TARGET_CC) CFLAGS+=-static -C $(GRUB_DIR)/grub grub
- mkdir -p $(dir $(STAGING_DIR)/$(GRUB_TARGET_BINARY))
- mv $(GRUB_DIR)/$(GRUB_BINARY) $(STAGING_DIR)/$(GRUB_TARGET_BINARY).static
- $(MAKE) CC=$(TARGET_CC) -C $(GRUB_DIR)/grub
-
-$(GRUB_DIR)/.installed: $(GRUB_DIR)/$(GRUB_BINARY)
- cp $(GRUB_DIR)/$(GRUB_BINARY) $(TARGET_DIR)/$(GRUB_TARGET_BINARY)
- test -d $(TARGET_DIR)/boot/grub || mkdir -p $(TARGET_DIR)/boot/grub
- cp $(GRUB_DIR)/stage1/stage1 $(GRUB_DIR)/stage2/*1_5 $(GRUB_DIR)/stage2/stage2 $(TARGET_DIR)/boot/grub/
-ifeq ($(BR2_TARGET_GRUB_SPLASH),y)
- test -f $(TARGET_DIR)/boot/grub/$(GRUB_SPLASHIMAGE) || \
- cp $(GRUB_SPLASHIMAGE) $(TARGET_DIR)/boot/grub/
-endif
- touch $@
-
-grub: uclibc $(GRUB_DIR)/.installed
-
-grub-clean:
- $(MAKE) DESTDIR=$(TARGET_DIR) CC=$(TARGET_CC) -C $(GRUB_DIR) uninstall
- -$(MAKE) -C $(GRUB_DIR) clean
- rm -f $(TARGET_DIR)/boot/grub/$(GRUB_SPLASHIMAGE) \
- $(TARGET_DIR)/sbin/$(GRUB_BINARY) \
- $(TARGET_DIR)/boot/grub/{stage{1,2},*1_5}
-
-grub-dirclean:
- rm -rf $(GRUB_DIR)
-
-endif
-
-#############################################################
-#
-# Toplevel Makefile options
-#
-#############################################################
-ifeq ($(BR2_TARGET_GRUB),y)
-TARGETS+=grub
-endif
+++ /dev/null
-default=0
-timeout=5
-splashimage=(hd0,0)/boot/grub/splash.xpm.gz
-hiddenmenu
-title Buildroot
- root (hd0,0)
- kernel /boot/bzImage rw root=/dev/hda1 vga=791
+++ /dev/null
-config BR2_TARGET_GRUB2
- bool "grub2"
- help
- The GRand Unified Bootloader for x86 systems, take #2.
-
-config BR2_TARGET_GRUB2_SPLASH
- bool "Splashimage support"
- depends on BR2_TARGET_GRUB2
- help
- Add support for splashimage.
-
- A splashimage is a 14-color indexed .xpm picture which
- is displayed as background for the grub menu.
+++ /dev/null
-? config.status.lineno
-? fix-grub-install.diff
-? genkernsyms.sh
-? gensymlist.sh
-? grub-mkimage.d
-? grub_script.tab.c
-? grub_script.tab.h
-? kernel_elf_symlist.c
-Index: util/powerpc/ieee1275/grub-install.in
-===================================================================
-RCS file: /cvsroot/grub/grub2/util/powerpc/ieee1275/grub-install.in,v
-retrieving revision 1.5
-diff -u -r1.5 grub-install.in
---- grub-1.95/util/powerpc/ieee1275/grub-install.in 28 May 2006 23:01:43 -0000 1.5
-+++ grub-1.95/util/powerpc/ieee1275/grub-install.in 4 Mar 2007 19:05:47 -0000
-@@ -23,6 +23,7 @@
- # Initialize some variables.
- prefix=@prefix@
- exec_prefix=@exec_prefix@
-+bindir=@bindir@
- sbindir=@sbindir@
- libdir=@libdir@
- PACKAGE_NAME=@PACKAGE_NAME@
+++ /dev/null
-GRUB2_SUPPORTED_ARCH=n
-ifeq ($(ARCH),i386)
-GRUB2_SUPPORTED_ARCH=y
-endif
-ifeq ($(ARCH),i486)
-GRUB2_SUPPORTED_ARCH=y
-endif
-ifeq ($(ARCH),i586)
-GRUB2_SUPPORTED_ARCH=y
-endif
-ifeq ($(ARCH),i686)
-GRUB2_SUPPORTED_ARCH=y
-endif
-ifeq ($(ARCH),x86_64)
-GRUB2_SUPPORTED_ARCH=y
-endif
-ifeq ($(GRUB2_SUPPORTED_ARCH),y)
-#############################################################
-#
-# grub2
-#
-#############################################################
-GRUB2_SOURCE:=grub2_1.95.orig.tar.gz
-GRUB2_PATCH:=grub2_1.95-5.diff.gz
-GRUB2_SITE=$(BR2_DEBIAN_MIRROR)/debian/pool/main/g/grub2
-GRUB2_PATCH_SITE:=$(BR2_DEBIAN_MIRROR)/debian/pool/main/g/grub2
-GRUB2_CAT:=$(ZCAT)
-GRUB2_DIR:=$(BUILD_DIR)/grub-1.95
-GRUB2_BINARY:=grub2/grub2
-GRUB2_TARGET_BINARY:=sbin/grub2
-GRUB2_SPLASHIMAGE=$(TOPDIR)/target/x86/grub/splash.xpm.gz
-
-
-GRUB2_CFLAGS=-DSUPPORT_LOOPDEV
-ifeq ($(BR2_LARGEFILE),)
-GRUB2_CFLAGS+=-U_FILE_OFFSET_BITS
-endif
-
-
-GRUB2_CONFIG-$(BR2_TARGET_GRUB2_SPLASH) += --enable-graphics
-GRUB2_CONFIG-$(BR2_TARGET_GRUB2_DISKLESS) += --enable-diskless
-GRUB2_CONFIG-$(BR2_TARGET_GRUB2_3c595) += --enable-3c595
-GRUB2_CONFIG-$(BR2_TARGET_GRUB2_3c90x) += --enable-3c90x
-GRUB2_CONFIG-$(BR2_TARGET_GRUB2_davicom) += --enable-davicom
-GRUB2_CONFIG-$(BR2_TARGET_GRUB2_e1000) += --enable-e1000
-GRUB2_CONFIG-$(BR2_TARGET_GRUB2_eepro100) += --enable-eepro100
-GRUB2_CONFIG-$(BR2_TARGET_GRUB2_epic100) += --enable-epic100
-GRUB2_CONFIG-$(BR2_TARGET_GRUB2_forcedeth) += --enable-forcedeth
-GRUB2_CONFIG-$(BR2_TARGET_GRUB2_natsemi) += --enable-natsemi
-GRUB2_CONFIG-$(BR2_TARGET_GRUB2_ns83820) += --enable-ns83820
-GRUB2_CONFIG-$(BR2_TARGET_GRUB2_ns8390) += --enable-ns8390
-GRUB2_CONFIG-$(BR2_TARGET_GRUB2_pcnet32) += --enable-pcnet32
-GRUB2_CONFIG-$(BR2_TARGET_GRUB2_pnic) += --enable-pnic
-GRUB2_CONFIG-$(BR2_TARGET_GRUB2_rtl8139) += --enable-rtl8139
-GRUB2_CONFIG-$(BR2_TARGET_GRUB2_r8169) += --enable-r8169
-GRUB2_CONFIG-$(BR2_TARGET_GRUB2_sis900) += --enable-sis900
-GRUB2_CONFIG-$(BR2_TARGET_GRUB2_tg3) += --enable-tg3
-GRUB2_CONFIG-$(BR2_TARGET_GRUB2_tulip) += --enable-tulip
-GRUB2_CONFIG-$(BR2_TARGET_GRUB2_tlan) += --enable-tlan
-GRUB2_CONFIG-$(BR2_TARGET_GRUB2_undi) += --enable-undi
-GRUB2_CONFIG-$(BR2_TARGET_GRUB2_via_rhine) += --enable-via-rhine
-GRUB2_CONFIG-$(BR2_TARGET_GRUB2_w89c840) += --enable-w89c840
-
-$(DL_DIR)/$(GRUB2_SOURCE):
- $(call DOWNLOAD,$(GRUB2_SITE),$(GRUB2_SOURCE))
-
-$(DL_DIR)/$(GRUB2_PATCH):
- $(call DOWNLOAD,$(GRUB2_PATCH_SITE),$(GRUB2_PATCH))
-
-grub2-source: $(DL_DIR)/$(GRUB2_SOURCE) $(DL_DIR)/$(GRUB2_PATCH)
-
-$(GRUB2_DIR)/.unpacked: $(DL_DIR)/$(GRUB2_SOURCE) $(DL_DIR)/$(GRUB2_PATCH)
- $(GRUB2_CAT) $(DL_DIR)/$(GRUB2_SOURCE) | tar -C $(BUILD_DIR) -xvf -
- toolchain/patch-kernel.sh $(GRUB2_DIR) $(DL_DIR) $(GRUB2_PATCH)
- for i in `grep -v "^#" $(GRUB2_DIR)/debian/patches/00list`; do \
- cat $(GRUB2_DIR)/debian/patches/$$i | patch -p1 -d $(GRUB2_DIR); \
- done
- toolchain/patch-kernel.sh $(GRUB2_DIR) target/x86/grub2 grub-\*.patch
- touch $@
-
-$(GRUB2_DIR)/.configured: $(GRUB2_DIR)/.unpacked
- (cd $(GRUB2_DIR); rm -rf config.cache; \
- $(TARGET_CONFIGURE_OPTS) \
- $(TARGET_CONFIGURE_ARGS) \
- CPPFLAGS="$(GRUB2_CFLAGS)" \
- grub_cv_i386_check_nested_functions=no \
- ./configure $(QUIET) \
- --target=$(GNU_TARGET_NAME) \
- --host=$(GNU_TARGET_NAME) \
- --build=$(GNU_HOST_NAME) \
- --prefix=/ \
- --mandir=/usr/man \
- --infodir=/usr/info \
- --disable-auto-linux-mem-opt \
- $(DISABLE_LARGEFILE) \
- $(GRUB2_CONFIG-y) \
- )
- touch $@
-
-$(GRUB2_DIR)/$(GRUB2_BINARY): $(GRUB2_DIR)/.configured
- $(MAKE) CC=$(TARGET_CC) -C $(GRUB2_DIR)
-
-$(GRUB2_DIR)/.installed: $(GRUB2_DIR)/$(GRUB2_BINARY)
- cp $(GRUB2_DIR)/$(GRUB2_BINARY) $(TARGET_DIR)/$(GRUB2_TARGET_BINARY)
- test -d $(TARGET_DIR)/boot/grub2 || mkdir -p $(TARGET_DIR)/boot/grub2
- cp $(GRUB2_DIR)/stage1/stage1 $(GRUB2_DIR)/stage2/*1_5 $(GRUB2_DIR)/stage2/stage2 $(TARGET_DIR)/boot/grub2/
-ifeq ($(BR2_TARGET_GRUB2_SPLASH),y)
- test -f $(TARGET_DIR)/boot/grub2/$(GRUB2_SPLASHIMAGE) || \
- cp $(GRUB2_SPLASHIMAGE) $(TARGET_DIR)/boot/grub2/
-endif
- touch $@
-
-grub2: uclibc $(GRUB2_DIR)/.installed
-
-grub2-clean:
- $(MAKE) DESTDIR=$(TARGET_DIR) CC=$(TARGET_CC) -C $(GRUB2_DIR) uninstall
- -$(MAKE) -C $(GRUB2_DIR) clean
- rm -f $(TARGET_DIR)/boot/grub2/$(GRUB2_SPLASHIMAGE) \
- $(TARGET_DIR)/sbin/$(GRUB2_BINARY) \
- $(TARGET_DIR)/boot/grub2/{stage{1,2},*1_5}
-
-grub2-dirclean:
- rm -rf $(GRUB2_DIR)
-
-endif
-
-#############################################################
-#
-# Toplevel Makefile options
-#
-#############################################################
-ifeq ($(BR2_TARGET_GRUB2),y)
-TARGETS+=grub2
-endif
+++ /dev/null
-config BR2_TARGET_SYSLINUX
- bool "syslinux"
- depends on BR2_i386
- help
- The syslinux bootloader for x86 systems.
- This includes: syslinux, pxelinux, extlinux.
-
-config BR2_TARGET_PXELINUX
- bool "pxelinux"
- depends on BR2_i386 || BR2_x86_64
- help
- The pxelinux loader for x86 systems.
+++ /dev/null
---- syslinux-3.82-org/Makefile 2009-09-17 13:11:23.000000000 +0200
-+++ syslinux-3.82/Makefile 2009-09-17 13:13:32.000000000 +0200
-@@ -42,7 +42,7 @@
- mbr/mbr_c.bin mbr/altmbr_c.bin mbr/gptmbr_c.bin \
- mbr/mbr_f.bin mbr/altmbr_f.bin mbr/gptmbr_f.bin \
- core/pxelinux.0 core/isolinux.bin core/isolinux-debug.bin \
-- gpxe/gpxelinux.0 dos/syslinux.com win32/syslinux.exe \
-+ gpxe/gpxelinux.0 dos/syslinux.com \
- $(MODULES)
-
- # BSUBDIRs build the on-target binary components.
+++ /dev/null
-SYSLINUX_SUPPORTED_ARCH=n
-ifeq ($(ARCH),i386)
-SYSLINUX_SUPPORTED_ARCH=y
-endif
-ifeq ($(ARCH),i486)
-SYSLINUX_SUPPORTED_ARCH=y
-endif
-ifeq ($(ARCH),i586)
-SYSLINUX_SUPPORTED_ARCH=y
-endif
-ifeq ($(ARCH),i686)
-SYSLINUX_SUPPORTED_ARCH=y
-endif
-ifeq ($(ARCH),x86_64)
-SYSLINUX_SUPPORTED_ARCH=y
-endif
-ifeq ($(SYSLINUX_SUPPORTED_ARCH),y)
-
-#############################################################
-#
-# syslinux to make target msdos/iso9660 filesystems bootable
-#
-#############################################################
-
-SYSLINUX_VERSION:=3.82
-SYSLINUX_DIR=$(BUILD_DIR)/syslinux-$(SYSLINUX_VERSION)
-SYSLINUX_DIR2=$(TOOLCHAIN_DIR)/syslinux-$(SYSLINUX_VERSION)
-SYSLINUX_SOURCE=syslinux-$(SYSLINUX_VERSION).tar.bz2
-SYSLINUX_CAT:=$(BZCAT)
-SYSLINUX_SITE=$(BR2_KERNEL_MIRROR)/linux/utils/boot/syslinux/
-SYSLINUX_BIN=$(SYSLINUX_DIR2)/mtools/syslinux
-
-
-$(DL_DIR)/$(SYSLINUX_SOURCE):
- $(call DOWNLOAD,$(SYSLINUX_SITE),$(SYSLINUX_SOURCE))
-
-syslinux-source: $(DL_DIR)/$(SYSLINUX_SOURCE)
-
-$(SYSLINUX_DIR)/Makefile: $(DL_DIR)/$(SYSLINUX_SOURCE) $(SYSLINUX_PATCH)
- $(SYSLINUX_CAT) $(DL_DIR)/$(SYSLINUX_SOURCE) | tar -C $(BUILD_DIR) $(TAR_OPTIONS) -
- toolchain/patch-kernel.sh $(SYSLINUX_DIR) target/x86/syslinux/ \*.patch
- touch -c $@
-
-$(SYSLINUX_DIR)/isolinux.bin $(SYSLINUX_DIR)/pxelinux.bin: $(SYSLINUX_DIR)/Makefile
- $(MAKE) CC="$(HOSTCC)" AR="$(HOSTAR)" -C $(SYSLINUX_DIR)
- touch -c $@
-
-syslinux: $(SYSLINUX_DIR)/isolinux.bin
-pxelinux: $(SYSLINUX_DIR)/pxelinux.bin
-
-pxelinux-clean syslinux-clean:
- rm -f $(SYSLINUX_DIR)/isolinux.bin $(SYSLINUX_DIR)/pxelinux.bin
- -$(MAKE) -C $(SYSLINUX_DIR) clean
-
-pxelinux-dirclean syslinux-dirclean:
- rm -rf $(SYSLINUX_DIR)
-
-endif
-
-#############################################################
-#
-# Toplevel Makefile options
-#
-#############################################################
-ifeq ($(BR2_TARGET_SYSLINUX),y)
-TARGETS+=syslinux
-endif
-ifeq ($(BR2_TARGET_PXELINUX),y)
-TARGETS+=pxelinux
-endif
projects / buildroot.git / commitdiff