bfd_vma address)
{
bfd_size_type loop_len, insn_len;
- xtensa_opcode opcode =
- insn_decode_opcode (contents, content_length, offset, 0);
- BFD_ASSERT (opcode != XTENSA_UNDEFINED);
- if (opcode != XTENSA_UNDEFINED)
- return FALSE;
- BFD_ASSERT (xtensa_opcode_is_loop (xtensa_default_isa, opcode));
- if (!xtensa_opcode_is_loop (xtensa_default_isa, opcode))
- return FALSE;
+ xtensa_opcode opcode;
+ opcode = insn_decode_opcode (contents, content_length, offset, 0);
+ if (opcode == XTENSA_UNDEFINED
+ || xtensa_opcode_is_loop (xtensa_default_isa, opcode) != 1)
+ {
+ BFD_ASSERT (FALSE);
+ return FALSE;
+ }
+
loop_len = insn_decode_len (contents, content_length, offset);
- BFD_ASSERT (loop_len != 0);
- if (loop_len == 0)
- return FALSE;
-
insn_len = insn_decode_len (contents, content_length, offset + loop_len);
- BFD_ASSERT (insn_len != 0);
- if (insn_len == 0)
- return FALSE;
+ if (loop_len == 0 || insn_len == 0)
+ {
+ BFD_ASSERT (FALSE);
+ return FALSE;
+ }
return check_branch_target_aligned_address (address + loop_len, insn_len);
}
};
-/* Attempt to narrow an instruction. Return true if the narrowing is
- valid. If the do_it parameter is non-zero, then perform the action
- in-place directly into the contents. Otherwise, do not modify the
- contents. The set of valid narrowing are specified by a string table
+/* Check if an instruction can be "narrowed", i.e., changed from a standard
+ 3-byte instruction to a 2-byte "density" instruction. If it is valid,
+ return the instruction buffer holding the narrow instruction. Otherwise,
+ return 0. The set of valid narrowing are specified by a string table
but require some special case operand checks in some cases. */
-static bfd_boolean
-narrow_instruction (bfd_byte *contents,
- bfd_size_type content_length,
- bfd_size_type offset,
- bfd_boolean do_it)
+static xtensa_insnbuf
+can_narrow_instruction (xtensa_insnbuf slotbuf,
+ xtensa_format fmt,
+ xtensa_opcode opcode)
{
- xtensa_opcode opcode;
- bfd_size_type insn_len, opi;
xtensa_isa isa = xtensa_default_isa;
- xtensa_format fmt, o_fmt;
+ xtensa_format o_fmt;
+ unsigned opi;
- static xtensa_insnbuf insnbuf = NULL;
- static xtensa_insnbuf slotbuf = NULL;
static xtensa_insnbuf o_insnbuf = NULL;
static xtensa_insnbuf o_slotbuf = NULL;
- if (insnbuf == NULL)
+ if (o_insnbuf == NULL)
{
- insnbuf = xtensa_insnbuf_alloc (isa);
- slotbuf = xtensa_insnbuf_alloc (isa);
o_insnbuf = xtensa_insnbuf_alloc (isa);
o_slotbuf = xtensa_insnbuf_alloc (isa);
}
- BFD_ASSERT (offset < content_length);
-
- if (content_length < 2)
- return FALSE;
-
- /* We will hand-code a few of these for a little while.
- These have all been specified in the assembler aleady. */
- xtensa_insnbuf_from_chars (isa, insnbuf, &contents[offset],
- content_length - offset);
- fmt = xtensa_format_decode (isa, insnbuf);
- if (xtensa_format_num_slots (isa, fmt) != 1)
- return FALSE;
-
- if (xtensa_format_get_slot (isa, fmt, 0, insnbuf, slotbuf) != 0)
- return FALSE;
-
- opcode = xtensa_opcode_decode (isa, fmt, 0, slotbuf);
- if (opcode == XTENSA_UNDEFINED)
- return FALSE;
- insn_len = xtensa_format_length (isa, fmt);
- if (insn_len > content_length)
- return FALSE;
-
- for (opi = 0; opi < (sizeof (narrowable)/sizeof (struct string_pair)); ++opi)
+ for (opi = 0; opi < (sizeof (narrowable)/sizeof (struct string_pair)); opi++)
{
bfd_boolean is_or = (strcmp ("or", narrowable[opi].wide) == 0);
o_opcode = xtensa_opcode_lookup (isa, narrowable[opi].narrow);
if (o_opcode == XTENSA_UNDEFINED)
- return FALSE;
+ return 0;
o_fmt = get_single_format (o_opcode);
if (o_fmt == XTENSA_UNDEFINED)
- return FALSE;
+ return 0;
if (xtensa_format_length (isa, fmt) != 3
|| xtensa_format_length (isa, o_fmt) != 2)
- return FALSE;
+ return 0;
xtensa_format_encode (isa, o_fmt, o_insnbuf);
operand_count = xtensa_opcode_num_operands (isa, opcode);
o_operand_count = xtensa_opcode_num_operands (isa, o_opcode);
if (xtensa_opcode_encode (isa, o_fmt, 0, o_slotbuf, o_opcode) != 0)
- return FALSE;
+ return 0;
if (!is_or)
{
if (xtensa_opcode_num_operands (isa, o_opcode) != operand_count)
- return FALSE;
+ return 0;
}
else
{
uint32 rawval0, rawval1, rawval2;
- if (o_operand_count + 1 != operand_count)
- return FALSE;
- if (xtensa_operand_get_field (isa, opcode, 0,
- fmt, 0, slotbuf, &rawval0) != 0)
- return FALSE;
- if (xtensa_operand_get_field (isa, opcode, 1,
- fmt, 0, slotbuf, &rawval1) != 0)
- return FALSE;
- if (xtensa_operand_get_field (isa, opcode, 2,
- fmt, 0, slotbuf, &rawval2) != 0)
- return FALSE;
-
- if (rawval1 != rawval2)
- return FALSE;
- if (rawval0 == rawval1) /* it is a nop */
- return FALSE;
+ if (o_operand_count + 1 != operand_count
+ || xtensa_operand_get_field (isa, opcode, 0,
+ fmt, 0, slotbuf, &rawval0) != 0
+ || xtensa_operand_get_field (isa, opcode, 1,
+ fmt, 0, slotbuf, &rawval1) != 0
+ || xtensa_operand_get_field (isa, opcode, 2,
+ fmt, 0, slotbuf, &rawval2) != 0
+ || rawval1 != rawval2
+ || rawval0 == rawval1 /* it is a nop */)
+ return 0;
}
for (i = 0; i < o_operand_count; ++i)
if (xtensa_operand_get_field (isa, opcode, i, fmt, 0,
slotbuf, &value)
|| xtensa_operand_decode (isa, opcode, i, &value))
- return FALSE;
+ return 0;
/* PC-relative branches need adjustment, but
the PC-rel operand will always have a relocation. */
|| xtensa_operand_encode (isa, o_opcode, i, &newval)
|| xtensa_operand_set_field (isa, o_opcode, i, o_fmt, 0,
o_slotbuf, newval))
- return FALSE;
+ return 0;
}
- if (xtensa_format_set_slot (isa, o_fmt, 0,
- o_insnbuf, o_slotbuf) != 0)
- return FALSE;
+ if (xtensa_format_set_slot (isa, o_fmt, 0, o_insnbuf, o_slotbuf))
+ return 0;
- if (do_it)
- xtensa_insnbuf_to_chars (isa, o_insnbuf, contents + offset,
- content_length - offset);
- return TRUE;
+ return o_insnbuf;
}
}
- return FALSE;
+ return 0;
}
-/* Attempt to widen an instruction. Return true if the widening is
- valid. If the do_it parameter is non-zero, then the action should
- be performed inplace into the contents. Otherwise, do not modify
- the contents. The set of valid widenings are specified by a string
- table but require some special case operand checks in some
- cases. */
+/* Attempt to narrow an instruction. If the narrowing is valid, perform
+ the action in-place directly into the contents and return TRUE. Otherwise,
+ the return value is FALSE and the contents are not modified. */
static bfd_boolean
-widen_instruction (bfd_byte *contents,
- bfd_size_type content_length,
- bfd_size_type offset,
- bfd_boolean do_it)
+narrow_instruction (bfd_byte *contents,
+ bfd_size_type content_length,
+ bfd_size_type offset)
{
xtensa_opcode opcode;
- bfd_size_type insn_len, opi;
+ bfd_size_type insn_len;
xtensa_isa isa = xtensa_default_isa;
- xtensa_format fmt, o_fmt;
+ xtensa_format fmt;
+ xtensa_insnbuf o_insnbuf;
static xtensa_insnbuf insnbuf = NULL;
static xtensa_insnbuf slotbuf = NULL;
- static xtensa_insnbuf o_insnbuf = NULL;
- static xtensa_insnbuf o_slotbuf = NULL;
if (insnbuf == NULL)
{
insnbuf = xtensa_insnbuf_alloc (isa);
slotbuf = xtensa_insnbuf_alloc (isa);
- o_insnbuf = xtensa_insnbuf_alloc (isa);
- o_slotbuf = xtensa_insnbuf_alloc (isa);
}
BFD_ASSERT (offset < content_length);
if (content_length < 2)
return FALSE;
- /* We will hand code a few of these for a little while.
+ /* We will hand-code a few of these for a little while.
These have all been specified in the assembler aleady. */
xtensa_insnbuf_from_chars (isa, insnbuf, &contents[offset],
content_length - offset);
if (insn_len > content_length)
return FALSE;
- for (opi = 0; opi < (sizeof (widenable)/sizeof (struct string_pair)); ++opi)
+ o_insnbuf = can_narrow_instruction (slotbuf, fmt, opcode);
+ if (o_insnbuf)
+ {
+ xtensa_insnbuf_to_chars (isa, o_insnbuf, contents + offset,
+ content_length - offset);
+ return TRUE;
+ }
+
+ return FALSE;
+}
+
+
+/* Check if an instruction can be "widened", i.e., changed from a 2-byte
+ "density" instruction to a standard 3-byte instruction. If it is valid,
+ return the instruction buffer holding the wide instruction. Otherwise,
+ return 0. The set of valid widenings are specified by a string table
+ but require some special case operand checks in some cases. */
+
+static xtensa_insnbuf
+can_widen_instruction (xtensa_insnbuf slotbuf,
+ xtensa_format fmt,
+ xtensa_opcode opcode)
+{
+ xtensa_isa isa = xtensa_default_isa;
+ xtensa_format o_fmt;
+ unsigned opi;
+
+ static xtensa_insnbuf o_insnbuf = NULL;
+ static xtensa_insnbuf o_slotbuf = NULL;
+
+ if (o_insnbuf == NULL)
+ {
+ o_insnbuf = xtensa_insnbuf_alloc (isa);
+ o_slotbuf = xtensa_insnbuf_alloc (isa);
+ }
+
+ for (opi = 0; opi < (sizeof (widenable)/sizeof (struct string_pair)); opi++)
{
bfd_boolean is_or = (strcmp ("or", widenable[opi].wide) == 0);
bfd_boolean is_branch = (strcmp ("beqz", widenable[opi].wide) == 0
o_opcode = xtensa_opcode_lookup (isa, widenable[opi].wide);
if (o_opcode == XTENSA_UNDEFINED)
- return FALSE;
+ return 0;
o_fmt = get_single_format (o_opcode);
if (o_fmt == XTENSA_UNDEFINED)
- return FALSE;
+ return 0;
if (xtensa_format_length (isa, fmt) != 2
|| xtensa_format_length (isa, o_fmt) != 3)
- return FALSE;
+ return 0;
xtensa_format_encode (isa, o_fmt, o_insnbuf);
operand_count = xtensa_opcode_num_operands (isa, opcode);
check_operand_count = o_operand_count;
if (xtensa_opcode_encode (isa, o_fmt, 0, o_slotbuf, o_opcode) != 0)
- return FALSE;
+ return 0;
if (!is_or)
{
if (xtensa_opcode_num_operands (isa, o_opcode) != operand_count)
- return FALSE;
+ return 0;
}
else
{
uint32 rawval0, rawval1;
- if (o_operand_count != operand_count + 1)
- return FALSE;
- if (xtensa_operand_get_field (isa, opcode, 0,
- fmt, 0, slotbuf, &rawval0) != 0)
- return FALSE;
- if (xtensa_operand_get_field (isa, opcode, 1,
- fmt, 0, slotbuf, &rawval1) != 0)
- return FALSE;
- if (rawval0 == rawval1) /* it is a nop */
- return FALSE;
+ if (o_operand_count != operand_count + 1
+ || xtensa_operand_get_field (isa, opcode, 0,
+ fmt, 0, slotbuf, &rawval0) != 0
+ || xtensa_operand_get_field (isa, opcode, 1,
+ fmt, 0, slotbuf, &rawval1) != 0
+ || rawval0 == rawval1 /* it is a nop */)
+ return 0;
}
if (is_branch)
check_operand_count--;
- for (i = 0; i < check_operand_count; ++i)
+ for (i = 0; i < check_operand_count; i++)
{
int new_i = i;
if (is_or && i == o_operand_count - 1)
if (xtensa_operand_get_field (isa, opcode, new_i, fmt, 0,
slotbuf, &value)
|| xtensa_operand_decode (isa, opcode, new_i, &value))
- return FALSE;
+ return 0;
/* PC-relative branches need adjustment, but
the PC-rel operand will always have a relocation. */
|| xtensa_operand_encode (isa, o_opcode, i, &newval)
|| xtensa_operand_set_field (isa, o_opcode, i, o_fmt, 0,
o_slotbuf, newval))
- return FALSE;
+ return 0;
}
if (xtensa_format_set_slot (isa, o_fmt, 0, o_insnbuf, o_slotbuf))
- return FALSE;
+ return 0;
- if (do_it)
- xtensa_insnbuf_to_chars (isa, o_insnbuf, contents + offset,
- content_length - offset);
- return TRUE;
+ return o_insnbuf;
}
}
+ return 0;
+}
+
+
+/* Attempt to widen an instruction. If the widening is valid, perform
+ the action in-place directly into the contents and return TRUE. Otherwise,
+ the return value is FALSE and the contents are not modified. */
+
+static bfd_boolean
+widen_instruction (bfd_byte *contents,
+ bfd_size_type content_length,
+ bfd_size_type offset)
+{
+ xtensa_opcode opcode;
+ bfd_size_type insn_len;
+ xtensa_isa isa = xtensa_default_isa;
+ xtensa_format fmt;
+ xtensa_insnbuf o_insnbuf;
+
+ static xtensa_insnbuf insnbuf = NULL;
+ static xtensa_insnbuf slotbuf = NULL;
+
+ if (insnbuf == NULL)
+ {
+ insnbuf = xtensa_insnbuf_alloc (isa);
+ slotbuf = xtensa_insnbuf_alloc (isa);
+ }
+
+ BFD_ASSERT (offset < content_length);
+
+ if (content_length < 2)
+ return FALSE;
+
+ /* We will hand-code a few of these for a little while.
+ These have all been specified in the assembler aleady. */
+ xtensa_insnbuf_from_chars (isa, insnbuf, &contents[offset],
+ content_length - offset);
+ fmt = xtensa_format_decode (isa, insnbuf);
+ if (xtensa_format_num_slots (isa, fmt) != 1)
+ return FALSE;
+
+ if (xtensa_format_get_slot (isa, fmt, 0, insnbuf, slotbuf) != 0)
+ return FALSE;
+
+ opcode = xtensa_opcode_decode (isa, fmt, 0, slotbuf);
+ if (opcode == XTENSA_UNDEFINED)
+ return FALSE;
+ insn_len = xtensa_format_length (isa, fmt);
+ if (insn_len > content_length)
+ return FALSE;
+
+ o_insnbuf = can_widen_instruction (slotbuf, fmt, opcode);
+ if (o_insnbuf)
+ {
+ xtensa_insnbuf_to_chars (isa, o_insnbuf, contents + offset,
+ content_length - offset);
+ return TRUE;
+ }
return FALSE;
}
}
+/* Do not widen an instruction if it is preceeded by a
+ loop opcode. It might cause misalignment. */
+
+static bfd_boolean
+prev_instr_is_a_loop (bfd_byte *contents,
+ bfd_size_type content_length,
+ bfd_size_type offset)
+{
+ xtensa_opcode prev_opcode;
+
+ if (offset < 3)
+ return FALSE;
+ prev_opcode = insn_decode_opcode (contents, content_length, offset-3, 0);
+ return (xtensa_opcode_is_loop (xtensa_default_isa, prev_opcode) == 1);
+}
+
+
/* Find all of the possible actions for an extended basic block. */
bfd_boolean
const ebb_t *ebb = &ebb_table->ebb;
unsigned rel_idx = ebb->start_reloc_idx;
property_table_entry *entry, *start_entry, *end_entry;
+ bfd_vma offset = 0;
+ xtensa_isa isa = xtensa_default_isa;
+ xtensa_format fmt;
+ static xtensa_insnbuf insnbuf = NULL;
+ static xtensa_insnbuf slotbuf = NULL;
+
+ if (insnbuf == NULL)
+ {
+ insnbuf = xtensa_insnbuf_alloc (isa);
+ slotbuf = xtensa_insnbuf_alloc (isa);
+ }
start_entry = &ebb->ptbl[ebb->start_ptbl_idx];
end_entry = &ebb->ptbl[ebb->end_ptbl_idx];
for (entry = start_entry; entry <= end_entry; entry++)
{
- bfd_vma offset, start_offset, end_offset;
+ bfd_vma start_offset, end_offset;
bfd_size_type insn_len;
start_offset = entry->address - ebb->sec->vma;
insn_len = insn_decode_len (ebb->contents, ebb->content_length,
offset);
-
- /* Propose no actions for a section with an undecodable offset. */
if (insn_len == 0)
- {
- (*_bfd_error_handler)
- (_("%B(%A+0x%lx): could not decode instruction; possible configuration mismatch"),
- ebb->sec->owner, ebb->sec, offset);
- return FALSE;
- }
+ goto decode_error;
+
if (check_branch_target_aligned_address (offset, insn_len))
align_type = EBB_REQUIRE_TGT_ALIGN;
ebb->content_length,
irel->r_offset);
if (simplify_size == 0)
- {
- (*_bfd_error_handler)
- (_("%B(%A+0x%lx): could not decode instruction for XTENSA_ASM_SIMPLIFY relocation; possible configuration mismatch"),
- ebb->sec->owner, ebb->sec, offset);
- return FALSE;
- }
+ goto decode_error;
ebb_propose_action (ebb_table, EBB_NO_ALIGN, 0,
ta_convert_longcall, offset, 0, TRUE);
continue;
}
- insn_len = insn_decode_len (ebb->contents, ebb->content_length,
- offset);
- /* If the instruction is undecodable, then report an error. */
- if (insn_len == 0)
+ if (offset + MIN_INSN_LENGTH > ebb->content_length)
+ goto decode_error;
+ xtensa_insnbuf_from_chars (isa, insnbuf, &ebb->contents[offset],
+ ebb->content_length - offset);
+ fmt = xtensa_format_decode (isa, insnbuf);
+ if (fmt == XTENSA_UNDEFINED)
+ goto decode_error;
+ insn_len = xtensa_format_length (isa, fmt);
+ if (insn_len == (bfd_size_type) XTENSA_UNDEFINED)
+ goto decode_error;
+
+ if (xtensa_format_num_slots (isa, fmt) != 1)
{
- (*_bfd_error_handler)
- (_("%B(%A+0x%lx): could not decode instruction; possible configuration mismatch"),
- ebb->sec->owner, ebb->sec, offset);
- return FALSE;
+ offset += insn_len;
+ continue;
}
-
+
+ xtensa_format_get_slot (isa, fmt, 0, insnbuf, slotbuf);
+ opcode = xtensa_opcode_decode (isa, fmt, 0, slotbuf);
+ if (opcode == XTENSA_UNDEFINED)
+ goto decode_error;
+
if ((entry->flags & XTENSA_PROP_INSN_NO_DENSITY) == 0
&& (entry->flags & XTENSA_PROP_INSN_NO_TRANSFORM) == 0
- && narrow_instruction (ebb->contents, ebb->content_length,
- offset, FALSE))
+ && can_narrow_instruction (slotbuf, fmt, opcode) != 0)
{
/* Add an instruction narrow action. */
ebb_propose_action (ebb_table, EBB_NO_ALIGN, 0,
ta_narrow_insn, offset, 0, FALSE);
- offset += insn_len;
- continue;
}
- if ((entry->flags & XTENSA_PROP_INSN_NO_TRANSFORM) == 0
- && widen_instruction (ebb->contents, ebb->content_length,
- offset, FALSE))
+ else if ((entry->flags & XTENSA_PROP_INSN_NO_TRANSFORM) == 0
+ && can_widen_instruction (slotbuf, fmt, opcode) != 0
+ && ! prev_instr_is_a_loop (ebb->contents,
+ ebb->content_length, offset))
{
/* Add an instruction widen action. */
ebb_propose_action (ebb_table, EBB_NO_ALIGN, 0,
ta_widen_insn, offset, 0, FALSE);
- offset += insn_len;
- continue;
}
- opcode = insn_decode_opcode (ebb->contents, ebb->content_length,
- offset, 0);
- if (xtensa_opcode_is_loop (xtensa_default_isa, opcode))
+ else if (xtensa_opcode_is_loop (xtensa_default_isa, opcode) == 1)
{
/* Check for branch targets. */
ebb_propose_action (ebb_table, EBB_REQUIRE_LOOP_ALIGN, 0,
ta_none, offset, 0, TRUE);
- offset += insn_len;
- continue;
}
offset += insn_len;
}
return TRUE;
+
+ decode_error:
+ (*_bfd_error_handler)
+ (_("%B(%A+0x%lx): could not decode instruction; possible configuration mismatch"),
+ ebb->sec->owner, ebb->sec, offset);
+ return FALSE;
}
copy_size = 2;
memmove (scratch, &contents[orig_dot], orig_insn_size);
BFD_ASSERT (action->removed_bytes == 1);
- rv = narrow_instruction (scratch, final_size, 0, TRUE);
+ rv = narrow_instruction (scratch, final_size, 0);
BFD_ASSERT (rv);
memmove (&dup_contents[dup_dot], scratch, copy_size);
orig_dot += orig_insn_size;
copy_size = 3;
memmove (scratch, &contents[orig_dot], orig_insn_size);
BFD_ASSERT (action->removed_bytes == -1);
- rv = widen_instruction (scratch, final_size, 0, TRUE);
+ rv = widen_instruction (scratch, final_size, 0);
BFD_ASSERT (rv);
memmove (&dup_contents[dup_dot], scratch, copy_size);
orig_dot += orig_insn_size;
projects / binutils-gdb.git / commitdiff