--- /dev/null
+2023-07-30 GDB Administrator <gdbadmin@sourceware.org>
+
+ Automatic date update in version.in
+
+2023-07-29 GDB Administrator <gdbadmin@sourceware.org>
+
+ Automatic date update in version.in
+
+2023-07-28 Jan Beulich <jbeulich@suse.com>
+
+ gas: amend X_unsigned uses
+ PR gas/30688
+
+ X_unsigned being clear does not indicate a negative number; it merely
+ indicates a signed one (whose sign may still be clear). Amend two uses
+ by an actual value check.
+
+2023-07-28 Tsukasa OI <research_trasio@irq.a4lg.com>
+
+ RISC-V: Add actual 'Zvkt' extension support
+ The 'Zvkt' extension is listed on the added extensions in the GNU Binutils
+ version 2.41 (see binutils/NEWS). However, the support of this extension
+ was actually missing.
+
+ This commit adds actual support of this extension and adds implications
+ from 'Zvkn' and 'Zvks' superset extensions.
+
+ bfd/ChangeLog:
+
+ * elfxx-riscv.c (riscv_implicit_subsets) Add implications from
+ 'Zvkn' and 'Zvks'. (riscv_supported_std_z_ext): Add 'Zvkt' to
+ the supported extension list.
+
+2023-07-28 YunQiang Su <yunqiang.su@cipunited.com>
+
+ MIPS: Support `-gnuabi64' target triplet suffix for 64-bit Linux targets
+ Make the n64 ABI the default for 64-bit Linux targets specified with
+ `-gnuabi64' suffix included in the target triplet, for configurations
+ such as the Debian mips64el and mips64r6el ports. Adjust testsuite
+ configuration accordingly.
+
+ There are the following regressions with the new target triplet:
+
+ mips64-linux-gnuabi64 +FAIL: readelf -S bintest
+ mips64-linux-gnuabi64 +FAIL: MIPS reloc estimation 1
+ mips64el-linux-gnuabi64 +FAIL: readelf -S bintest
+ mips64el-linux-gnuabi64 +FAIL: MIPS reloc estimation 1
+
+ The `readelf' issue comes from a difference in section headers produced
+ that the `binutils/testsuite/binutils-all/readelf.s-64' pattern template
+ does not match. While there has been a precedent it does not appear to
+ me that there is a clear advantage from adding more and more variations
+ to the template rather than forking the existing template into multiple
+ ones for a more exact match. So this is best deferred to a separate
+ discussion.
+
+ The MIPS reloc estimation issue is an actual bug in `objdump', which
+ discards a number of trailing entries from output here for n64 composed
+ relocations:
+
+ DYNAMIC RELOCATION RECORDS
+ OFFSET TYPE VALUE
+ 0000000000000000 R_MIPS_NONE *ABS*
+ 0000000000000000 R_MIPS_NONE *ABS*
+
+ and consequently `ld/testsuite/ld-mips-elf/reloc-estimate-1.d' does not
+ match even though ELF output produced is correct according to `readelf':
+
+ Relocation section '.rel.dyn' at offset 0x10400 contains 2 entries:
+ Offset Info Type Sym. Value Sym. Name
+ 000000000000 000000000000 R_MIPS_NONE
+ Type2: R_MIPS_NONE
+ Type3: R_MIPS_NONE
+ 000000010000 000300001203 R_MIPS_REL32 0000000000010010 foo@@V2
+ Type2: R_MIPS_64
+ Type3: R_MIPS_NONE
+
+ As a genuine bug this has to be handled separately.
+
+ Co-Authored by: Maciej W. Rozycki <macro@orcam.me.uk>
+
+ bfd/
+ * config.bfd: Add `mips64*el-*-linux*-gnuabi64' and
+ `mips64*-*-linux*-gnuabi64' targets.
+
+ binutils/
+ * testsuite/binutils-all/mips/mips.exp: Handle `*-*-*-gnuabi64'
+ targets.
+ * testsuite/binutils-all/objcopy.exp: Handle
+ `mips64*-*-*-gnuabi64' targets.
+ * testsuite/binutils-all/remove-relocs-01.d: Likewise.
+ * testsuite/binutils-all/remove-relocs-04.d: Likewise.
+ * testsuite/binutils-all/remove-relocs-05.d: Likewise.
+ * testsuite/binutils-all/remove-relocs-06.d: Likewise.
+
+ gas/
+ * configure.ac: Handle `mips64*-linux-gnuabi64' targets.
+ * configure: Regenerate.
+ * testsuite/gas/mips/compact-eh-eb-7.d: Handle
+ `mips64*-*-*-gnuabi64' targets.
+ * testsuite/gas/mips/compact-eh-el-7.d: Likewise.
+
+ ld/
+ * configure.tgt: Add `mips64*el-*-linux-gnuabi64' and
+ `mips64*-*-linux-gnuabi64' targets.
+ * testsuite/ld-undefined/undefined.exp: Handle
+ `mips64*-*-*-gnuabi64' targets.
+ * testsuite/ld-mips-elf/attr-gnu-4-10.d: Likewise.
+ * testsuite/ld-mips-elf/compact-eh6.d: Likewise.
+ * testsuite/ld-mips-elf/mips-elf.exp: Handle `*-*-*-gnuabi64'
+ targets.
+
+ (cherry picked from commit 29c108c9610640439daa5244a573348b7c47d994)
+
+2023-07-28 YunQiang Su <yunqiang.su@cipunited.com>
+
+ MIPS/GAS/testsuite: Fix n64 compact EH failures
+ Expect a `.MIPS.options' section alternatively to `.reginfo' and ignore
+ contents of either as irrelevant for all the affected compact EH tests,
+ removing these regressions:
+
+ mips64-openbsd -FAIL: Compact EH EB #1 with personality ID and FDE data
+ mips64-openbsd -FAIL: Compact EH EB #2 with personality routine and FDE data
+ mips64-openbsd -FAIL: Compact EH EB #3 with personality id and large FDE data
+ mips64-openbsd -FAIL: Compact EH EB #4 with personality id, FDE data and LSDA
+ mips64-openbsd -FAIL: Compact EH EB #5 with personality routine, FDE data and LSDA
+ mips64-openbsd -FAIL: Compact EH EB #6 with personality id, LSDA and large FDE data
+ mips64-openbsd -FAIL: Compact EH EL #1 with personality ID and FDE data
+ mips64-openbsd -FAIL: Compact EH EL #2 with personality routine and FDE data
+ mips64-openbsd -FAIL: Compact EH EL #3 with personality id and large FDE data
+ mips64-openbsd -FAIL: Compact EH EL #4 with personality id, FDE data and LSDA
+ mips64-openbsd -FAIL: Compact EH EL #5 with personality routine, FDE data and LSDA
+ mips64-openbsd -FAIL: Compact EH EL #6 with personality id, LSDA and large FDE data
+ mips64el-openbsd -FAIL: Compact EH EB #1 with personality ID and FDE data
+ mips64el-openbsd -FAIL: Compact EH EB #2 with personality routine and FDE data
+ mips64el-openbsd -FAIL: Compact EH EB #3 with personality id and large FDE data
+ mips64el-openbsd -FAIL: Compact EH EB #4 with personality id, FDE data and LSDA
+ mips64el-openbsd -FAIL: Compact EH EB #5 with personality routine, FDE data and LSDA
+ mips64el-openbsd -FAIL: Compact EH EB #6 with personality id, LSDA and large FDE data
+ mips64el-openbsd -FAIL: Compact EH EL #1 with personality ID and FDE data
+ mips64el-openbsd -FAIL: Compact EH EL #2 with personality routine and FDE data
+ mips64el-openbsd -FAIL: Compact EH EL #3 with personality id and large FDE data
+ mips64el-openbsd -FAIL: Compact EH EL #4 with personality id, FDE data and LSDA
+ mips64el-openbsd -FAIL: Compact EH EL #5 with personality routine, FDE data and LSDA
+ mips64el-openbsd -FAIL: Compact EH EL #6 with personality id, LSDA and large FDE data
+
+ Co-Authored-By: Maciej W. Rozycki <macro@orcam.me.uk>
+
+ gas/
+ * testsuite/gas/mips/compact-eh-eb-1.d: Accept `.MIPS.options'
+ section as an alternative to `.reginfo' and ignore contents of
+ either.
+ * testsuite/gas/mips/compact-eh-eb-2.d: Likewise.
+ * testsuite/gas/mips/compact-eh-eb-3.d: Likewise.
+ * testsuite/gas/mips/compact-eh-eb-4.d: Likewise.
+ * testsuite/gas/mips/compact-eh-eb-5.d: Likewise.
+ * testsuite/gas/mips/compact-eh-eb-6.d: Likewise.
+ * testsuite/gas/mips/compact-eh-el-1.d: Likewise.
+ * testsuite/gas/mips/compact-eh-el-2.d: Likewise.
+ * testsuite/gas/mips/compact-eh-el-3.d: Likewise.
+ * testsuite/gas/mips/compact-eh-el-4.d: Likewise.
+ * testsuite/gas/mips/compact-eh-el-5.d: Likewise.
+ * testsuite/gas/mips/compact-eh-el-6.d: Likewise.
+
+ (cherry picked from commit 316be2b229f5bd07ebef48fd1d7b8cb103e4d815)
+
+2023-07-28 YunQiang Su <yunqiang.su@cipunited.com>
+
+ testsuite: Handle composed R_MIPS_NONE relocations
+ MIPS n64 ABI has a peculiarity where all relocations are composed of
+ three, with subsequent relocation types set to R_MIPS_NONE if further
+ calculation is not required. Example output produced by `readelf' and
+ `objdump' for such relocations is:
+
+ Offset Info Type Sym. Value Sym. Name + Addend
+ 000000000000 000800000002 R_MIPS_32 0000000000000000 foo + 0
+ Type2: R_MIPS_NONE
+ Type3: R_MIPS_NONE
+
+ and:
+
+ OFFSET TYPE VALUE
+ 0000000000000000 R_MIPS_32 foo
+ 0000000000000000 R_MIPS_NONE *ABS*
+ 0000000000000000 R_MIPS_NONE *ABS*
+
+ respectively. The presence of these extra R_MIPS_NONE entries is not
+ relevant for generic or even some MIPS tests, so optionally match them
+ with the respective dump patterns, also discarding `xfail' annotation
+ for MIPS/OpenBSD targets from gas/elf/missing-build-notes.d, removing
+ these regressions:
+
+ mips64-openbsd -FAIL: readelf -r bintest
+ mips64-openbsd -FAIL: forward expression
+ mips64-openbsd -FAIL: assignment tests
+ mips64-openbsd -FAIL: gas/all/none
+ mips64-openbsd -XFAIL: gas/elf/missing-build-notes
+ mips64-openbsd -FAIL: macro test 2
+ mips64-openbsd -FAIL: macro irp
+ mips64-openbsd -FAIL: macro rept
+ mips64-openbsd -FAIL: nested irp/irpc/rept
+ mips64-openbsd -FAIL: macro vararg
+ mips64-openbsd -FAIL: mips jalx
+ mips64-openbsd -FAIL: ST Microelectronics Loongson-2F workarounds of Jump Instruction issue
+ mips64el-openbsd -FAIL: readelf -r bintest
+ mips64el-openbsd -FAIL: forward expression
+ mips64el-openbsd -FAIL: assignment tests
+ mips64el-openbsd -FAIL: gas/all/none
+ mips64el-openbsd -XFAIL: gas/elf/missing-build-notes
+ mips64el-openbsd -FAIL: macro test 2
+ mips64el-openbsd -FAIL: macro irp
+ mips64el-openbsd -FAIL: macro rept
+ mips64el-openbsd -FAIL: nested irp/irpc/rept
+ mips64el-openbsd -FAIL: macro vararg
+ mips64el-openbsd -FAIL: mips jalx
+ mips64el-openbsd -FAIL: ST Microelectronics Loongson-2F workarounds of Jump Instruction issue
+
+ Co-Authored-By: Maciej W. Rozycki <macro@orcam.me.uk>
+
+ binutils/
+ * testsuite/binutils-all/readelf.r-64: Optionally match extra
+ R_MIPS_NONE pairs.
+
+ gas/
+ * testsuite/gas/all/assign.d: Optionally match extra
+ R_MIPS_NONE pairs.
+ * testsuite/gas/all/fwdexp.d: Likewise.
+ * testsuite/gas/all/none.d: Likewise.
+ * testsuite/gas/macros/irp.d: Likewise.
+ * testsuite/gas/macros/repeat.d: Likewise.
+ * testsuite/gas/macros/rept.d: Likewise.
+ * testsuite/gas/macros/test2.d: Likewise.
+ * testsuite/gas/macros/vararg.d: Likewise.
+ * testsuite/gas/mips/compact-eh-eb-1.d: Likewise.
+ * testsuite/gas/mips/compact-eh-eb-2.d: Likewise.
+ * testsuite/gas/mips/compact-eh-eb-3.d: Likewise.
+ * testsuite/gas/mips/compact-eh-eb-4.d: Likewise.
+ * testsuite/gas/mips/compact-eh-eb-5.d: Likewise.
+ * testsuite/gas/mips/compact-eh-eb-6.d: Likewise.
+ * testsuite/gas/mips/compact-eh-el-1.d: Likewise.
+ * testsuite/gas/mips/compact-eh-el-2.d: Likewise.
+ * testsuite/gas/mips/compact-eh-el-3.d: Likewise.
+ * testsuite/gas/mips/compact-eh-el-4.d: Likewise.
+ * testsuite/gas/mips/compact-eh-el-5.d: Likewise.
+ * testsuite/gas/mips/compact-eh-el-6.d: Likewise.
+ * testsuite/gas/mips/loongson-2f-3.d: Likewise.
+ * testsuite/gas/mips/mips-jalx.d: Likewise.
+ * testsuite/gas/elf/missing-build-notes.d: Likewise. Remove
+ the `xfail' tag.
+
+ ld/
+ * testsuite/ld-mips-elf/reloc-estimate-1.d: Optionally match
+ extra R_MIPS_NONE pairs.
+
+ (cherry picked from commit ed4dca900c0dbc1317917cb289255d2f8d03f732)
+
+2023-07-28 YunQiang Su <yunqiang.su@cipunited.com>
+
+ MIPS/testsuite: Handle 64-bit addresses
+ Several MIPS test cases are suitable for the n64 ABI if not for the
+ extra leading zeros or spaces in addresses not handled by dump patterns.
+ Match the characters then, removing these regressions:
+
+ mips64-openbsd -FAIL: .set arch=FOO
+ mips64-openbsd -FAIL: ST Microelectronics Loongson-2F workarounds of nop issue
+ mips64-openbsd -FAIL: MIPS DSP ASE for MIPS64
+ mips64-openbsd -FAIL: gas/mips/align2
+ mips64-openbsd -FAIL: gas/mips/align2-el
+ mips64-openbsd -FAIL: Locally-resolvable PC-relative code references
+ mips64-openbsd -FAIL: MIPS jalx-1
+ mips64-openbsd -FAIL: JAL overflow 2
+ mips64el-openbsd -FAIL: .set arch=FOO
+ mips64el-openbsd -FAIL: ST Microelectronics Loongson-2F workarounds of nop issue
+ mips64el-openbsd -FAIL: MIPS DSP ASE for MIPS64
+ mips64el-openbsd -FAIL: gas/mips/align2
+ mips64el-openbsd -FAIL: gas/mips/align2-el
+ mips64el-openbsd -FAIL: Locally-resolvable PC-relative code references
+ mips64el-openbsd -FAIL: MIPS jalx-1
+ mips64el-openbsd -FAIL: JAL overflow 2
+
+ Co-Authored-By: Maciej W. Rozycki <macro@orcam.me.uk>
+
+ gas/
+ * testsuite/gas/mips/align2-el.d: Match extra leading zeros
+ with addresses.
+ * testsuite/gas/mips/align2.d: Likewise.
+ * testsuite/gas/mips/compact-eh-eb-1.d: Likewise.
+ * testsuite/gas/mips/compact-eh-eb-2.d: Likewise.
+ * testsuite/gas/mips/compact-eh-eb-3.d: Likewise.
+ * testsuite/gas/mips/compact-eh-eb-4.d: Likewise.
+ * testsuite/gas/mips/compact-eh-eb-5.d: Likewise.
+ * testsuite/gas/mips/compact-eh-eb-6.d: Likewise.
+ * testsuite/gas/mips/compact-eh-el-1.d: Likewise.
+ * testsuite/gas/mips/compact-eh-el-2.d: Likewise.
+ * testsuite/gas/mips/compact-eh-el-3.d: Likewise.
+ * testsuite/gas/mips/compact-eh-el-4.d: Likewise.
+ * testsuite/gas/mips/compact-eh-el-5.d: Likewise.
+ * testsuite/gas/mips/compact-eh-el-6.d: Likewise.
+ * testsuite/gas/mips/loongson-2f-2.d: Likewise.
+ * testsuite/gas/mips/loongson-2f-3.d: Likewise.
+ * testsuite/gas/mips/mips-jalx.d: Likewise.
+ * testsuite/gas/mips/mips64-dsp.d: Likewise.
+ * testsuite/gas/mips/pcrel-1.d: Likewise.
+ * testsuite/gas/mips/set-arch.d: Likewise.
+
+ ld/
+ * testsuite/ld-mips-elf/jaloverflow-2.d: Match extra leading
+ zeros and spaces with addresses as appropriate.
+ * testsuite/ld-mips-elf/jalx-1.d: Likewise.
+ * testsuite/ld-mips-elf/reloc-estimate-1.d: Likewise.
+
+ (cherry picked from commit ec76a6172f7b6d61f7d76c2bcf766122132116b8)
+
+2023-07-28 YunQiang Su <yunqiang.su@cipunited.com>
+
+ testsuite: Also discard the `.MIPS.options' section
+ Also discard the `.MIPS.options' section, used with n64 MIPS binaries,
+ along with similar other MIPS sections (`.reginfo', `.MIPS.abiflags')
+ not relevant for the test cases concerned, fixing these regressions:
+
+ mips64-openbsd -FAIL: ld-elf/group3a
+ mips64-openbsd -FAIL: ld-elf/group3b
+ mips64-openbsd -FAIL: Place orphan sections (map file check)
+ mips64-openbsd -FAIL: ld-elf/orphan-region
+ mips64-openbsd -FAIL: ld-elf/orphan
+ mips64-openbsd -FAIL: overlay size (map file check)
+ mips64-openbsd -FAIL: overlay size
+ mips64el-openbsd -FAIL: ld-elf/group3a
+ mips64el-openbsd -FAIL: ld-elf/group3b
+ mips64el-openbsd -FAIL: Place orphan sections (map file check)
+ mips64el-openbsd -FAIL: ld-elf/orphan-region
+ mips64el-openbsd -FAIL: ld-elf/orphan
+ mips64el-openbsd -FAIL: overlay size (map file check)
+ mips64el-openbsd -FAIL: overlay size
+
+ Co-Authored-By: Maciej W. Rozycki <macro@orcam.me.uk>
+
+ binutils/
+ * testsuite/binutils-all/strip-3.d: Add `-R .MIPS.options' to
+ the `strip' tag.
+
+ ld/
+ * testsuite/ld-elf/group.ld: Also discard `.MIPS.options'.
+ * testsuite/ld-elf/orphan-region.ld: Likewise.
+ * testsuite/ld-elf/orphan.ld: Likewise.
+ * testsuite/ld-mips-elf/got-page-1.ld: Likewise.
+ * testsuite/ld-scripts/overlay-size.t: Likewise.
+
+ (cherry picked from commit 60ec8306db150e687fc05870949056bae6c8d635)
+
+2023-07-28 Maciej W. Rozycki <macro@orcam.me.uk>
+
+ MIPS/LD/testsuite: Fix MIPS16 interlinking test IRIX 6 regressions
+ IRIX 6 does not have MIPS16 stub section support in its n32 linker
+ scripts, causing such input sections to be propagated to the respective
+ output sections rather than `.text', causing dump pattern mismatches.
+
+ Expect IRIX 6 to fail with n32 testing then, removing this regression:
+
+ mips-sgi-irix6 -FAIL: MIPS16 interlinking for local functions 1 (n32)
+
+ We may choose to update IRIX 6 n32 linker scripts sometime, as it seems
+ a harmless change.
+
+ ld/
+ * testsuite/ld-mips-elf/mips-elf.exp: Expect IRIX 6 to fail with
+ n32 `mips16-local-stubs-1' testing.
+
+ (cherry picked from commit ec3205bbc6f2018c9907bfd6e6c6ae51a2e01432)
+
+2023-07-28 YunQiang Su <yunqiang.su@cipunited.com>
+
+ MIPS/LD/testsuite: Fix MIPS16 interlinking test n64 regressions
+ The MIPS16 interlinking test for local functions expects to be assembled
+ with 32-bit addressing, otherwise causing assembly warnings:
+
+ .../ld/testsuite/ld-mips-elf/mips16-local-stubs-1.s: Assembler messages:
+ .../ld/testsuite/ld-mips-elf/mips16-local-stubs-1.s:16: Warning: la used to load 64-bit address; recommend using dla instead
+
+ Use the per-ABI framework then to run the test explicitly for o32 and
+ n32 ABIs only, replacing the `-mips4' option from the `as' tag with
+ `.module mips4' pseudo-op within the source itself so as to avoid
+ assembly errors:
+
+ Assembler messages:
+ Error: -mips4 conflicts with the other architecture options, which imply -mips3
+
+ with n32 testing for some targets, and ultimately removing these
+ regressions:
+
+ mips64-openbsd -FAIL: MIPS16 interlinking for local functions 1
+ mips64el-openbsd -FAIL: MIPS16 interlinking for local functions 1
+
+ Co-Authored-By: Maciej W. Rozycki <macro@orcam.me.uk>
+
+ ld/
+ * testsuite/ld-mips-elf/mips16-local-stubs-1.d: Remove `-mips4'
+ from the `as' tag.
+ * testsuite/ld-mips-elf/mips16-local-stubs-1.s: Add `.module
+ mips4'.
+ * testsuite/ld-mips-elf/mips-elf.exp: Run `mips16-local-stubs-1'
+ for o32 and n32 ABIs only.
+
+ (cherry picked from commit 3c8ed624caf3317b2155a8c00a7af6a8bb6a3c10)
+
+2023-07-28 YunQiang Su <yunqiang.su@cipunited.com>
+
+ MIPS/GAS/testsuite: Force o32 for tests expecting 32-bit addressing
+ A few GAS tests expect to be assembled with 32-bit addressing, otherwise
+ causing an assembly warning:
+
+ .../gas/testsuite/gas/mips/fix-rm7000-2.s:11: Warning: la used to load 64-bit address; recommend using dla instead
+
+ or pattern dump mismatches against 32-bit address calculations, however
+ these tests do not enforce their expectation in any. For none of them
+ the specific ABI used is of any relevance however, so select the o32 ABI
+ unconditionally, removing these failures with OpenBSD targets:
+
+ mips64-openbsd -FAIL: MIPS RM7000 workarounds test 2 (micromips)
+ mips64-openbsd -FAIL: MIPS RM7000 workarounds test 2 (mips3)
+ mips64-openbsd -FAIL: MIPS RM7000 workarounds test 2 (mips4)
+ mips64-openbsd -FAIL: MIPS RM7000 workarounds test 2 (mips5)
+ mips64-openbsd -FAIL: MIPS RM7000 workarounds test 2 (mips64)
+ mips64-openbsd -FAIL: MIPS RM7000 workarounds test 2 (mips64r2)
+ mips64-openbsd -FAIL: MIPS RM7000 workarounds test 2 (mips64r3)
+ mips64-openbsd -FAIL: MIPS RM7000 workarounds test 2 (mips64r5)
+ mips64-openbsd -FAIL: MIPS RM7000 workarounds test 2 (octeon)
+ mips64-openbsd -FAIL: MIPS RM7000 workarounds test 2 (octeon2)
+ mips64-openbsd -FAIL: MIPS RM7000 workarounds test 2 (octeon3)
+ mips64-openbsd -FAIL: MIPS RM7000 workarounds test 2 (octeonp)
+ mips64-openbsd -FAIL: MIPS RM7000 workarounds test 2 (r4000)
+ mips64-openbsd -FAIL: MIPS RM7000 workarounds test 2 (sb1)
+ mips64-openbsd -FAIL: MIPS RM7000 workarounds test 2 (vr5400)
+ mips64-openbsd -FAIL: MIPS RM7000 workarounds test 2 (xlr)
+ mips64-openbsd -FAIL: MIPS-OCTEON octeon_saa_saad (octeon2)
+ mips64-openbsd -FAIL: MIPS-OCTEON octeon_saa_saad (octeon3)
+ mips64-openbsd -FAIL: MIPS-OCTEON octeon_saa_saad (octeonp)
+ mips64-openbsd -FAIL: Full MIPS R5900
+ mips64-openbsd -FAIL: MIPS R5900 VU0
+ mips64-openbsd -FAIL: Paired LL/SC for mips64r6 (mips64r6)
+ mips64el-openbsd -FAIL: MIPS RM7000 workarounds test 2 (micromips)
+ mips64el-openbsd -FAIL: MIPS RM7000 workarounds test 2 (mips3)
+ mips64el-openbsd -FAIL: MIPS RM7000 workarounds test 2 (mips4)
+ mips64el-openbsd -FAIL: MIPS RM7000 workarounds test 2 (mips5)
+ mips64el-openbsd -FAIL: MIPS RM7000 workarounds test 2 (mips64)
+ mips64el-openbsd -FAIL: MIPS RM7000 workarounds test 2 (mips64r2)
+ mips64el-openbsd -FAIL: MIPS RM7000 workarounds test 2 (mips64r3)
+ mips64el-openbsd -FAIL: MIPS RM7000 workarounds test 2 (mips64r5)
+ mips64el-openbsd -FAIL: MIPS RM7000 workarounds test 2 (octeon)
+ mips64el-openbsd -FAIL: MIPS RM7000 workarounds test 2 (octeon2)
+ mips64el-openbsd -FAIL: MIPS RM7000 workarounds test 2 (octeon3)
+ mips64el-openbsd -FAIL: MIPS RM7000 workarounds test 2 (octeonp)
+ mips64el-openbsd -FAIL: MIPS RM7000 workarounds test 2 (r4000)
+ mips64el-openbsd -FAIL: MIPS RM7000 workarounds test 2 (sb1)
+ mips64el-openbsd -FAIL: MIPS RM7000 workarounds test 2 (vr5400)
+ mips64el-openbsd -FAIL: MIPS RM7000 workarounds test 2 (xlr)
+ mips64el-openbsd -FAIL: MIPS-OCTEON octeon_saa_saad (octeon2)
+ mips64el-openbsd -FAIL: MIPS-OCTEON octeon_saa_saad (octeon3)
+ mips64el-openbsd -FAIL: MIPS-OCTEON octeon_saa_saad (octeonp)
+ mips64el-openbsd -FAIL: Full MIPS R5900
+ mips64el-openbsd -FAIL: MIPS R5900 VU0
+ mips64el-openbsd -FAIL: Paired LL/SC for mips64r6 (mips64r6)
+
+ Co-Authored-By: Maciej W. Rozycki <macro@orcam.me.uk>
+
+ gas/
+ * testsuite/gas/mips/fix-rm7000-2.d: Add `-32' to the `as' tag.
+ * testsuite/gas/mips/micromips@fix-rm7000-2.d: Likewise.
+ * testsuite/gas/mips/r5900-full.d: Likewise.
+ * testsuite/gas/mips/r5900-vu0.d: Likewise.
+ * testsuite/gas/mips/llpscp-64.d: Add `as' tag with `-32'.
+ * testsuite/gas/mips/octeon-saa-saad.d: Likewise.
+
+ (cherry picked from commit ce0077a2e724146285c282037a41c68de6c0608d)
+
+2023-07-28 Maciej W. Rozycki <macro@orcam.me.uk>
+
+ MIPS/LD/testsuite: Run `got-dump-1' for o32/n32 ABIs
+ The `got-dump-1' test case uses 32-bit addressing, so it makes no sense
+ to run it with the n64 ABI. And there is a corresponding `got-dump-2'
+ test already for the n64 ABI.
+
+ Use the per-ABI framework then to run the `got-dump-1' test explicitly
+ for o32 and n32 ABIs only.
+
+ ld/
+ * testsuite/ld-mips-elf/mips-elf.exp: Run `got-dump-1' for o32
+ and n32 ABIs only.
+
+ (cherry picked from commit 70116eb5e6c74f9b526b1fec4e39f11238cb6a34)
+
+2023-07-28 Maciej W. Rozycki <macro@orcam.me.uk>
+
+ MIPS/LD/testsuite: Fix `attr-gnu-4-10' failures with OpenBSD targets
+ OpenBSD targets produce ELF64 files while the pattern dump expects ELF32
+ output and specific header sizes. Disable it for `mips64*-*-openbsd*'
+ for these targets then, removing these failures:
+
+ mips64-openbsd -FAIL: ld-mips-elf/attr-gnu-4-10
+ mips64el-openbsd -FAIL: ld-mips-elf/attr-gnu-4-10
+
+ ld/
+ * testsuite/ld-mips-elf/attr-gnu-4-10.d: Add `notarget' tag with
+ `mips64*-*-openbsd*'.
+
+ (cherry picked from commit b50c220d179d239eacd7d7e120f7466e2ea47170)
+
+2023-07-28 Maciej W. Rozycki <macro@orcam.me.uk>
+
+ MIPS/LD/testsuite: Fix `attr-gnu-4-10' failures with IRIX targets
+ IRIX targets do not enable the production of a `.pdr' section in GAS by
+ default, which causes a failure with the `attr-gnu-4-10' test case due
+ to a difference resulting in the number and indices of sections produced
+ in linker output.
+
+ As the presence or absence of this section is not relevant to this test
+ case, just enable it unconditionally, fixing these regressions:
+
+ mips-sgi-irix5 -FAIL: ld-mips-elf/attr-gnu-4-10
+ mips-sgi-irix6 -FAIL: ld-mips-elf/attr-gnu-4-10
+
+ ld/
+ * testsuite/ld-mips-elf/attr-gnu-4-10.d: Add `as' tag with
+ `-mpdr'.
+
+ (cherry picked from commit d4e5281f03764a985b1229e9417a4fd1bebcea17)
+
+2023-07-28 Maciej W. Rozycki <macro@orcam.me.uk>
+
+ MIPS/LD/testsuite: Fix JALR relaxation test failure with IRIX 6
+ The `mips-sgi-irix6' target only supports IRIX linker emulations, but
+ most JALR relaxation tests request the relevant traditional emulation
+ instead, causing a link failure:
+
+ ./ld-new: unrecognised emulation mode: elf32btsmipn32
+ Supported emulations: elf32bmipn32 elf32bsmip elf64bmip
+
+ This is clearly an omission from the conversion to use the per-ABI
+ framework made with commit 78da84f99405 ("MIPS/LD/testsuite: Correct
+ mips-elf.exp test ABI/emul/endian arrangement"). These tests are also
+ endianness agnostic, which was missed in the conversion as well.
+
+ Remove the unnecessary explicit ABI and endianness options then and rely
+ on the per-ABI framework to get things right, removing this regression:
+
+ mips-sgi-irix6 -FAIL: MIPS relax-jalr-shared n32
+
+ ld/
+ * testsuite/ld-mips-elf/relax-jalr-n32-shared.d: Remove flags
+ related to ABI and endianness selection from the `as' and `ld'
+ tags.
+ * testsuite/ld-mips-elf/relax-jalr-n64.d: Likewise.
+ * testsuite/ld-mips-elf/relax-jalr-n64-shared.d: Likewise.
+ * testsuite/ld-mips-elf/mips-elf.exp: Remove `as' and `ld' tag
+ additions from the invocation of JALR relaxation tests.
+
+ (cherry picked from commit 94052ee4ccf0ac64b5f55da59878f13d567ef3cf)
+
+2023-07-28 Maciej W. Rozycki <macro@orcam.me.uk>
+
+ MIPS/LD/testsuite: Fix unaligned JALX failures with OpenBSD targets
+ There are only n64 linker emulations included with `mips64*-*-openbsd*'
+ targets, however the unaligned JALX tests insist on running across all
+ targets and force the n32 ABI, causing link errors with the targets
+ concerned, e.g.:
+
+ ./ld-new: tmpdir/unaligned-jalx-0.o: ABI is incompatible with that of the selected emulation
+ ./ld-new: failed to merge target specific data of file tmpdir/unaligned-jalx-0.o
+ ./ld-new: tmpdir/unaligned-insn.o: ABI is incompatible with that of the selected emulation
+ ./ld-new: failed to merge target specific data of file tmpdir/unaligned-insn.o
+
+ Convert the tests then to use the per-ABI framework and run them for the
+ o32 and n32 ABIs, removing these regressions:
+
+ mips64-openbsd -FAIL: MIPS JALX to unaligned symbol 0
+ mips64-openbsd -FAIL: MIPS JALX to unaligned symbol 1
+ mips64-openbsd -FAIL: MIPS JALX to unaligned symbol 2
+ mips64-openbsd -FAIL: MIPS JALX to unaligned symbol 3
+ mips64-openbsd -FAIL: MIPS16 JALX to unaligned symbol 0
+ mips64-openbsd -FAIL: MIPS16 JALX to unaligned symbol 1
+ mips64-openbsd -FAIL: microMIPS JALX to unaligned symbol 0
+ mips64-openbsd -FAIL: microMIPS JALX to unaligned symbol 1
+ mips64el-openbsd -FAIL: MIPS JALX to unaligned symbol 0
+ mips64el-openbsd -FAIL: MIPS JALX to unaligned symbol 1
+ mips64el-openbsd -FAIL: MIPS JALX to unaligned symbol 2
+ mips64el-openbsd -FAIL: MIPS JALX to unaligned symbol 3
+ mips64el-openbsd -FAIL: MIPS16 JALX to unaligned symbol 0
+ mips64el-openbsd -FAIL: MIPS16 JALX to unaligned symbol 1
+ mips64el-openbsd -FAIL: microMIPS JALX to unaligned symbol 0
+ mips64el-openbsd -FAIL: microMIPS JALX to unaligned symbol 1
+
+ Similar tests for the n64 ABI can be added separately, using suitable
+ dump patterns.
+
+ ld/
+ * testsuite/ld-mips-elf/unaligned-jalx-0.d: Remove `-32' from
+ the `as' tag.
+ * testsuite/ld-mips-elf/unaligned-jalx-1.d: Likewise.
+ * testsuite/ld-mips-elf/unaligned-jalx-2.d: Likewise.
+ * testsuite/ld-mips-elf/unaligned-jalx-3.d: Likewise.
+ * testsuite/ld-mips-elf/unaligned-jalx-mips16-0.d: Likewise.
+ * testsuite/ld-mips-elf/unaligned-jalx-mips16-1.d: Likewise.
+ * testsuite/ld-mips-elf/unaligned-jalx-micromips-0.d: Likewise.
+ * testsuite/ld-mips-elf/unaligned-jalx-micromips-1.d: Likewise.
+ * testsuite/ld-mips-elf/mips-elf.exp: Run unaligned JALX tests
+ with `run_dump_test_o32' and `run_dump_test_n32' rather than
+ `run_dump_test'.
+
+ (cherry picked from commit 67e789ae32fadc540c10839f08ad53ff01e2d732)
+
+2023-07-28 Maciej W. Rozycki <macro@orcam.me.uk>
+
+ MIPS/GAS/testsuite: Disable compact EH #7 tests with OpenBSD targets
+ Compact EH #7 tests use output templates that are not suitable for the
+ n64 ABI, which `mips64*-*-openbsd*' targets use by default, because the
+ contents of the sections examined are expected to be differnt. Disable
+ the tests then, removing these regressions:
+
+ mips64-openbsd -FAIL: Compact EH EB #7 with personality id and fallback FDE
+ mips64-openbsd -FAIL: Compact EH EL #7 with personality id and fallback FDE
+ mips64el-openbsd -FAIL: Compact EH EB #7 with personality id and fallback FDE
+ mips64el-openbsd -FAIL: Compact EH EL #7 with personality id and fallback FDE
+
+ Suitable corresponding tests for the n64 ABI can be added separately.
+
+ gas/
+ * testsuite/gas/mips/compact-eh-eb-7.d: Exclude for
+ `mips64*-*-openbsd*'.
+ * testsuite/gas/mips/compact-eh-el-7.d: Likewise.
+
+ (cherry picked from commit 2b4a60ab59f14a8fc1039c0cea41d22674447c1e)
+
+2023-07-28 YunQiang Su <yunqiang.su@cipunited.com>
+
+ MIPS/LD: Include n64 `.interp' with INITIAL_READONLY_SECTIONS
+ In ld/emulparams/elf64bmip-defs.sh there is no explicit handling of the
+ `.interp' section, which causes it to be positioned in output at an odd
+ place.
+
+ Let's include it with INITIAL_READONLY_SECTIONS, just like o32/n32 do,
+ fixing a regression from commit 5a8e7be242f3 ("INITIAL_READONLY_SECTIONS
+ in elf.sc"), where the handling of n64 was missed due to an unfortunate
+ sequence of events where ld/emulparams/elf64bmip-defs.sh was only added
+ with commit 94bb04b3c611 ("Use .reginfo rather than .MIPS.options in n32
+ linker scripts") the day before.
+
+ Add test cases covering section ordering across the three ABIs. This
+ change also fixes ld/pr23658-2:
+
+ FAIL: Build pr23658-2
+
+ Co-Authored-By: Maciej W. Rozycki <macro@orcam.me.uk>
+
+ ld/ChangeLog:
+ * emulparams/elf64bmip-defs.sh: Include `.interp' with
+ INITIAL_READONLY_SECTIONS.
+ * testsuite/ld-mips-elf/pie-n64.d: Adjust addresses.
+ * testsuite/ld-mips-elf/sections-1-o32.rd: New test.
+ * testsuite/ld-mips-elf/sections-1-o32t.rd: New test.
+ * testsuite/ld-mips-elf/sections-1-n32.rd: New test.
+ * testsuite/ld-mips-elf/sections-1-n32t.rd: New test.
+ * testsuite/ld-mips-elf/sections-1-n32p.rd: New test.
+ * testsuite/ld-mips-elf/sections-1-n64.rd: New test.
+ * testsuite/ld-mips-elf/sections-1-n64t.rd: New test.
+ * testsuite/ld-mips-elf/sections-2-o32.rd: New test.
+ * testsuite/ld-mips-elf/sections-2-o32t.rd: New test.
+ * testsuite/ld-mips-elf/sections-2-n32.rd: New test.
+ * testsuite/ld-mips-elf/sections-2-n32t.rd: New test.
+ * testsuite/ld-mips-elf/sections-2-n32p.rd: New test.
+ * testsuite/ld-mips-elf/sections-2-n64.rd: New test.
+ * testsuite/ld-mips-elf/sections-2-n64t.rd: New test.
+ * testsuite/ld-mips-elf/sections.s: New test source.
+ * testsuite/ld-mips-elf/mips-elf.exp: Run the new tests.
+
+ (cherry picked from commit f625926792da741ab196ef71c16e481331965b6f)
+
+2023-07-28 Maciej W. Rozycki <macro@orcam.me.uk>
+
+ Revert "MIPS: support mips*64 as CPU and gnuabi64 as ABI"
+ This reverts commit 32f1c80375ebe8ad25d9805ee5889f0006c51e59. It had
+ two unrelated changes lumped together, one of which changed the meaning
+ of the `mipsisa64*-*-linux*' target triplets, which was not properly
+ evaluated.
+
+ (cherry picked from commit cc66ad2d2a63cec2eaafd7bbc6a9204490816c0b)
+
+2023-07-28 GDB Administrator <gdbadmin@sourceware.org>
+
+ Automatic date update in version.in
+
+2023-07-27 GDB Administrator <gdbadmin@sourceware.org>
+
+ Automatic date update in version.in
+
+2023-07-26 GDB Administrator <gdbadmin@sourceware.org>
+
+ Automatic date update in version.in
+
+2023-07-25 GDB Administrator <gdbadmin@sourceware.org>
+
+ Automatic date update in version.in
+
+2023-07-24 mengqinggang <mengqinggang@loongson.cn>
+
+ LoongArch: Fix immediate overflow check bug
+ * elfnn-loongarch.c (RELOCATE_CALC_PC32_HI20): Redefined.
+ (RELOCATE_CALC_PC64_HI32): Redefined.
+ * elfxx-loongarch.c (reloc_bits_pcrel20_s2): Delete.
+ (reloc_bits_b16): Delete.
+ (reloc_bits_b21): Delete.
+ (reloc_bits_b26): Delete.
+ (reloc_sign_bits): New.
+
+2023-07-24 Nick Clifton <nickc@redhat.com>
+
+ Updated Serbian translations for bfd, gold and opcodes
+
+2023-07-24 GDB Administrator <gdbadmin@sourceware.org>
+
+ Automatic date update in version.in
+
+2023-07-23 GDB Administrator <gdbadmin@sourceware.org>
+
+ Automatic date update in version.in
+
+2023-07-22 GDB Administrator <gdbadmin@sourceware.org>
+
+ Automatic date update in version.in
+
+2023-07-21 Alan Modra <amodra@gmail.com>
+
+ MIPS: Don't move __gnu_lto_slim to .scommon
+ * elfxx-mips.c (_bfd_mips_elf_symbol_processing): Don't treat
+ __gnu_lto_slim as SHN_MIPS_SCOMMON.
+ (_bfd_mips_elf_add_symbol_hook): Likewise.
+
+2023-07-21 GDB Administrator <gdbadmin@sourceware.org>
+
+ Automatic date update in version.in
+
+2023-07-20 GDB Administrator <gdbadmin@sourceware.org>
+
+ Automatic date update in version.in
+
+2023-07-19 Nick Clifton <nickc@redhat.com>
+
+ merged
+
+ Updated Romanian translation for the opcodes directory
+
+ Updated Romainian translation for the opcodes directory
+
+2023-07-19 Alan Modra <amodra@gmail.com>
+
+ [GOLD, PowerPC64] Debug info relocation overflow
+ It is possible to build huge binaries on powerpc64, where 32-bit
+ addresses in debug info are insufficient to descibe locations in the
+ binary. Help out the user, and only warn about debug overflows.
+
+ * powerpc.cc (Target_powerpc::Relocate::relocate): Warn on
+ relocation overflows in debug info.
+
+ (cherry picked from commit 03c02b696e90714a0ae2c0200d3c65cfffcaa1ee)
+
+2023-07-19 Alan Modra <amodra@gmail.com>
+
+ PR10957, Missing option to really print section+offset
+ Many of the reloc error messages have already been converted from
+ using %C to using %H in ld.bfd, to print section+offset as well as
+ file/line/function. This catches a few remaining, and changes gold to
+ do the same.
+
+ PR 10957
+ bfd/
+ * elf32-sh.c (sh_elf_relocate_section): Use %H in error messages.
+ gold/
+ * object.cc (Relocate_info::location): Always report section+offset.
+ * testsuite/debug_msg.sh: Adjust to suit.
+ * testsuite/x32_overflow_pc32.sh: Likewise.
+ * testsuite/x86_64_overflow_pc32.sh: Likewise.
+ ld/
+ * emultempl/pe.em (read_addend): Use %H in error message.
+ * emultempl/pep.em (read_addend): Likewise.
+ * ldcref.c (check_reloc_refs): Likewise.
+ * ldmain.c (warning_find_reloc, undefined_symbol): Likewise.
+ * pe-dll.c (pe_create_import_fixup): Likewise.
+ * testsuite/ld-cris/undef2.d: Adjust expected output to suit.
+ * testsuite/ld-cris/undef3.d: Likewise.
+ * testsuite/ld-elf/shared.exp: Likewise.
+ * testsuite/ld-i386/compressed1.d: Likewise.
+ * testsuite/ld-ia64/line.exp: Likewise.
+ * testsuite/ld-plugin/lto.exp: Likewise.
+ * testsuite/ld-undefined/undefined.exp: Likewise.
+ * testsuite/ld-x86-64/compressed1.d: Likewise.
+ * testsuite/ld-x86-64/line.exp: Likewise.
+ * testsuite/ld-x86-64/pr27587.err: Likewise.
+
+ (cherry picked from commit 02d2a36902c7b0fefe05e8d9bdbf11e846ac71fe)
+
+2023-07-19 Alan Modra <amodra@gmail.com>
+
+ Fix loongarch build with gcc-4.5
+ * loongarch-opc.c (loongarch_alias_opcodes): Don't trigger
+ gcc-4.5 bug in handling of struct initialisation.
+
+ (cherry picked from commit 4993e5cc1e2e1e192f56f5788453c1b6f9cca894)
+
+2023-07-19 Alan Modra <amodra@gmail.com>
+
+ elf_object_p load of dynamic symbols
+ This fixes an uninitialised memory access on a fuzzed file:
+ 0 0xf22e9b in offset_from_vma /src/binutils-gdb/bfd/elf.c:1899:2
+ 1 0xf1e90f in _bfd_elf_get_dynamic_symbols /src/binutils-gdb/bfd/elf.c:2099:13
+ 2 0x10e6a54 in bfd_elf32_object_p /src/binutils-gdb/bfd/elfcode.h:851:9
+
+ Hopefully it will also stop any attempt to load dynamic symbols from
+ eu-strip debug files.
+
+ * elfcode.h (elf_object_p): Do not attempt to load dynamic
+ symbols for a file with no section headers until all the
+ program headers are swapped in. Do not fail on eu-strip debug
+ files.
+
+ (cherry picked from commit 22e90ac5af46c01ee4972cf04e835266862bbb35)
+
+2023-07-19 GDB Administrator <gdbadmin@sourceware.org>
+
+ Automatic date update in version.in
+
+2023-07-18 Vladimir Mezentsev <vladimir.mezentsev@oracle.com>
+
+ gprofng: 30602 [2.41] gprofng test hangs on i686-linux-gnu
+ There were several problems in the gprofng testing:
+ - we did not catch a timeout for each test.
+ - we used exit() to stop a failed test. But this stops all other tests.
+ - we used a time_t (long) type in smalltest.c instead of a long long type.
+
+ PR gprofng/30602
+ * configure.ac: Launch only native testing.
+ * configure: Rebuild.
+ * testsuite/config/default.exp: Set TEST_TIMEOUT.
+ * testsuite/gprofng.display/setpath_map.exp: Use return instead of exit.
+ * testsuite/gprofng.display/gp-archive.exp: Likewise.
+ * testsuite/gprofng.display/gp-collect-app_F.exp: Likewise.
+ * testsuite/gprofng.display/display.exp: Delete an unnecessary test
+ for native testing.
+ * testsuite/lib/display-lib.exp (run_native_host_cmd): Add timeout.
+ * testsuite/lib/smalltest.c: Use a long long type instead of time_t.
+
+2023-07-18 Nick Clifton <nickc@redhat.com>
+
+ Updated Swedish translation for the binutils subdirectory
+
+2023-07-18 Pter Chubb <peter.chubb@unsw.edu.au>
+
+ PR 30632 - ld segfaults if linker script includes a STARTUP line.
+
+2023-07-18 GDB Administrator <gdbadmin@sourceware.org>
+
+ Automatic date update in version.in
+
+2023-07-17 Mark Harmstone <mark@harmstone.com>
+
+ ld/PDB: fix off-by-1 in add_globals_ref()
+
+2023-07-17 GDB Administrator <gdbadmin@sourceware.org>
+
+ Automatic date update in version.in
+
+2023-07-16 GDB Administrator <gdbadmin@sourceware.org>
+
+ Automatic date update in version.in
+
+2023-07-15 GDB Administrator <gdbadmin@sourceware.org>
+
+ Automatic date update in version.in
+
+2023-07-14 GDB Administrator <gdbadmin@sourceware.org>
+
+ Automatic date update in version.in
+
+2023-07-13 GDB Administrator <gdbadmin@sourceware.org>
+
+ Automatic date update in version.in
+
+2023-07-12 Alan Modra <amodra@gmail.com>
+
+ Re: Keeping track of rs6000-coff archive element pointers
+ bfd/
+ * coff-rs6000.c (add_range): Revise comment, noting possible fail.
+ (_bfd_xcoff_openr_next_archived_file): Start with clean ranges.
+ binutils/
+ * bfdtest1.c: Enhance to catch errors on second scan.
+
+ (cherry picked from commit 1052fb3ecb1ae46bcf22634c48739c12e585196a)
+
+2023-07-12 Alan Modra <amodra@gmail.com>
+
+ Use run_host_cmd to run $CC and other no-section-header test fixes
+ We should be using run_host_cmd everywhere we invoke a compiler in the
+ ld testsuite, if we want to use ld/ld-new just built. run_host_cmd
+ properly inserts $gcc_B_opt in cases where a user wants to test
+ binutils with a newly built compiler, ie. when $CC specifies -B itself.
+
+ Also, it is not good practice to exclude tests when non-native except
+ of course those tests that run a target binary. Compiling and linking
+ often shows up problems.
+
+ * testsuite/ld-elf/no-section-header.exp (binutils_run_test):
+ Use run_host_cmd to invoke $CC_FOR_TARGET. Run all tests
+ non-native too, except for attempting to run the binaries.
+ Run tests for ELF in general, not just linux.
+ * testsuite/ld-elf/pr25617-1-no-sec-hdr.rd: Allow localentry
+ symbol decoration, and support either sorting of symbols.
+ * testsuite/ld-elf/pr25617-1a-no-sec-hdr.rd: Likewise.
+ * testsuite/ld-elf/pr25617-1a-sec-hdr.rd: Likewise.
+ * testsuite/ld-elf/pr25617-1a-no-sec-hdr.nd: Accept D function syms.
+ * testsuite/ld-elf/start-shared-noheader-sysv.rd: Accept
+ mips-sgi-irix symbol output.
+ * testsuite/ld-elf/start-shared-noheader.nd: Likewise.
+
+ (cherry picked from commit 46f51ac38b81df4bf890e13824427c69285fdcaa)
+
+2023-07-12 YunQiang Su <yunqiang.su@cipunited.com>
+
+ ld: Use run_host_cmd_yesno in indirect.exp instead of catch exec
+ Catch "exec $CC_FOR_TARGET" won't use the gas/ld that we just build,
+ and in fact run_host_cmd_yesno is a better choice for it.
+
+ ld/ChangeLog:
+
+ * testsuite/ld-elf/indirect.exp: use run_host_cmd_yesno
+ instead of handwrite catch exec $CC_FOR_TARGET.
+
+ (cherry picked from commit 0f5cb49f68ae1be4b9702e71c3a9b80ee46b310a)
+
+2023-07-12 YunQiang Su <yunqiang.su@cipunited.com>
+
+ ld: Use [list ] syntax to define run_tests in indirect.exp
+ Currently, the var run_tests is defined by syntax {{}},
+ while in this case, variables cannot be used.
+ Thus $NOPIE_CFLAGS and $NOPIE_LDFLAGS are passed to cmd as names
+ instead of values:
+ gcc ... $NOPIE_CFLAGS -c .../indirect5a.c -o tmpdir/indirect5a.o
+
+ Let's use [list [list ]] syntax instead.
+
+ ld/ChangeLog:
+
+ * testsuite/ld-elf/indirect.exp(run_tests): use [list [list]]
+ syntax instead of {{}}.
+
+ (cherry picked from commit 96a73f2cb2a1b4c47e49ff194a94f7394308956b)
+
+2023-07-12 Alan Modra <amodra@gmail.com>
+
+ Re: Stop the linker's --dependency-file option from including temporary lto files.
+ PR 30568
+ * ldfile.c (ldfile_try_open_bfd): Fix build failure when
+ !BFD_SUPPORTS_PLUGINS.
+
+ (cherry picked from commit 5f60df9974516867c02562b56c3a98cf4714a915)
+
+2023-07-12 GDB Administrator <gdbadmin@sourceware.org>
+
+ Automatic date update in version.in
+
+2023-07-11 GDB Administrator <gdbadmin@sourceware.org>
+
+ Automatic date update in version.in
+
+2023-07-10 GDB Administrator <gdbadmin@sourceware.org>
+
+ Automatic date update in version.in
+
+2023-07-09 GDB Administrator <gdbadmin@sourceware.org>
+
+ Automatic date update in version.in
+
+2023-07-08 GDB Administrator <gdbadmin@sourceware.org>
+
+ Automatic date update in version.in
+
+2023-07-07 Nick Clifton <nickc@redhat.com>
+
+ Replace local variable called 'rename' with 'renamed'
+
+ Udated Freach and Romainian translations for various sub-directories
+
+2023-07-07 YunQiang Su <yunqiang.su@cipunited.com>
+
+ ld: fix plugin tests for MIPS PIC
+ On MIPS, for PIC objects, symbols may reference 2 times:
+ once from the caller, and once from GOT.
+ Thus ld may complains 2 times about "undefined reference".
+
+ So we add a new "#?" line to every effected testsuite.
+
+2023-07-07 GDB Administrator <gdbadmin@sourceware.org>
+
+ Automatic date update in version.in
+
+2023-07-06 GDB Administrator <gdbadmin@sourceware.org>
+
+ Automatic date update in version.in
+
+2023-07-05 GDB Administrator <gdbadmin@sourceware.org>
+
+ Automatic date update in version.in
+
+2023-07-04 Nick Clifton <nickc@redhat.com>
+
+ Updated Ukranian, Romanian and German translations for various sub-directories
+
+2023-07-04 GDB Administrator <gdbadmin@sourceware.org>
+
+ Automatic date update in version.in
+
+2023-07-03 Nick Clifton <nickc@redhat.com>
+
+ Change version number to 2.40.90 and regenerate files
+
+ Add markers for the 2.41 branch
+
+2023-07-03 WANG Xuerui <git@xen0n.name>
+
+ gas: NEWS: Announce LoongArch changes in the 2.41 cycle
+ gas/ChangeLog:
+
+ * NEWS: Mention LoongArch changes for 2.41.
+
+2023-07-03 WANG Xuerui <git@xen0n.name>
+
+ binutils: NEWS: Announce LoongArch changes in the 2.41 cycle
+ binutils/ChangeLog:
+
+ * NEWS: Mention LoongArch changes for 2.41.
+
+2023-07-03 WANG Xuerui <git@xen0n.name>
+
+ LoongArch: gas: Fix shared builds
+ Formerly an include of libbfd.h was added in commit 56576f4a722
+ ("LoongArch: gas: Add support for linker relaxation."), in order to
+ allow calling _bfd_read_unsigned_leb128 from gas, but doing so broke
+ shared builds. Commit d2fddb6d783 fixed this reference but did not
+ remove the now unnecessary inclusion of libbfd.h. The gas_assert macro
+ expands into a conditional call to abort(), but "abort" is re-defined to
+ _bfd_abort in libbfd.h, so the extra include breaks any gas_assert
+ usage, and should be removed.
+
+ gas/ChangeLog:
+
+ * config/tc-loongarch.c: Don't include libbfd.h.
+
+ Fixes: d2fddb6d783 ("LoongArch: Fix ld "undefined reference" error with --enable-shared")
+
+2023-07-03 WANG Xuerui <git@xen0n.name>
+
+ opcodes/loongarch: Mark address offset operands of LVZ/LBT insns as such
+ opcodes/ChangeLog:
+
+ * loongarch-opc.c: Mark the offset operands as "so" for
+ {,x}v{ld,st}, {,x}v{ldrepl,stelm}.[bhwd], and {ld,st}[lr].[wd].
+
+2023-07-03 GDB Administrator <gdbadmin@sourceware.org>
+
+ Automatic date update in version.in
+
+2023-07-02 GDB Administrator <gdbadmin@sourceware.org>
+
+ Automatic date update in version.in
+
+2023-07-01 Vladimir Mezentsev <vladimir.mezentsev@oracle.com>
+
+ gprofng: fix data race
+ In our GUI project (https://savannah.gnu.org/projects/gprofng-gui), we use
+ the output of gprofng to display the data. Sometimes this data is corrupted.
+
+ gprofng/ChangeLog
+ 2023-06-29 Vladimir Mezentsev <vladimir.mezentsev@oracle.com>
+
+ * src/ipc.cc (ipc_doWork): Fix data race.
+ * src/ipcio.cc (IPCresponse::print): Fix data race.
+ Remove unused variables and functions.
+ * src/ipcio.h: Declare two variables.
+ * src/StringBuilder.cc (StringBuilder::write): New function.
+ * src/StringBuilder.h: Likewise.
+
+2023-07-01 Christoph Müllner <christoph.muellner@vrull.eu>
+
+ binutils: NEWS: Announce new RISC-V vector crypto extensions
+ This commit adds the recently added support of the RISC-V vector crypto
+ extensions to the NEWS file.
+
+ binutils/ChangeLog:
+
+ * NEWS: Announce new RISC-V vector crypto extensions.
+
+2023-07-01 Nathan Huckleberry <nhuck@google.com>
+
+ RISC-V: Add support for the Zvksc ISA extension
+ Zvksc is part of the vector crypto extensions.
+
+ Zvksc is shorthand for the following set of extensions:
+ - Zvks
+ - Zvbc
+
+ bfd/ChangeLog:
+
+ * elfxx-riscv.c: Define Zvksc extension.
+
+ gas/ChangeLog:
+
+ * testsuite/gas/riscv/zvksc.d: New test.
+ * testsuite/gas/riscv/zvksc.s: New test.
+
+2023-07-01 Nathan Huckleberry <nhuck@google.com>
+
+ RISC-V: Add support for the Zvknc ISA extension
+ Zvknc is part of the vector crypto extensions.
+
+ Zvknc is shorthand for the following set of extensxions:
+ - Zvkn
+ - Zvbc
+
+ bfd/ChangeLog:
+
+ * elfxx-riscv.c: Define Zvknc extension.
+
+ gas/ChangeLog:
+
+ * testsuite/gas/riscv/zvknc.d: New test.
+ * testsuite/gas/riscv/zvknc.s: New test.
+
+2023-07-01 Nathan Huckleberry <nhuck@google.com>
+
+ RISC-V: Add support for the Zvksg ISA extension
+ Zvksg is part of the vector crypto extensions.
+
+ Zvksg is shorthand for the following set of extensions:
+ - Zvks
+ - Zvkg
+
+ bfd/ChangeLog:
+
+ * elfxx-riscv.c: Define Zvksg extension.
+
+ gas/ChangeLog:
+
+ * testsuite/gas/riscv/zvksg.d: New test.
+ * testsuite/gas/riscv/zvksg.s: New test.
+
+2023-07-01 Christoph Müllner <christoph.muellner@vrull.eu>
+
+ RISC-V: Add support for the Zvks ISA extension
+ Zvks is part of the vector crypto extensions.
+
+ Zvks is shorthand for the following set of extensions:
+ - Zvksed
+ - Zvksh
+ - Zvbb
+ - Zvkt
+
+ bfd/ChangeLog:
+
+ * elfxx-riscv.c: Define Zvks extension.
+
+ gas/ChangeLog:
+
+ * testsuite/gas/riscv/zvks.d: New test.
+ * testsuite/gas/riscv/zvks.s: New test.
+
+2023-07-01 Nathan Huckleberry <nhuck@google.com>
+
+ RISC-V: Add support for the Zvkng ISA extension
+ Zvkng is part of the vector crypto extensions.
+
+ Zvkng is shorthand for the following set of extensions:
+ - Zvkn
+ - Zvkg
+
+ bfd/ChangeLog:
+
+ * elfxx-riscv.c: Define Zvkng extension.
+
+ gas/ChangeLog:
+
+ * testsuite/gas/riscv/zvkng.d: New test.
+ * testsuite/gas/riscv/zvkng.s: New test.
+
+2023-07-01 Nathan Huckleberry <nhuck@google.com>
+
+ RISC-V: Allow nested implications for extensions
+ Certain extensions require two levels of implications. For example,
+ zvkng implies zvkn and zvkn implies zvkned. Enabling zvkng should also
+ enable zvkned.
+
+ This patch fixes this behavior.
+
+ bfd/ChangeLog:
+
+ * elfxx-riscv.c (riscv_parse_add_implicit_subsets): Allow nested
+ implications for extensions.
+
+2023-07-01 Christoph Müllner <christoph.muellner@vrull.eu>
+
+ RISC-V: Add support for the Zvkn ISA extension
+ Zvkn is part of the vector crypto extensions.
+
+ Zvkn is shorthand for the following set of extensions:
+ - Zvkned
+ - Zvknhb
+ - Zvbb
+ - Zvkt
+
+ bfd/ChangeLog:
+
+ * elfxx-riscv.c: Define Zvkn extension.
+
+ gas/ChangeLog:
+
+ * testsuite/gas/riscv/zvkn.d: New test.
+ * testsuite/gas/riscv/zvkn.s: New test.
+
+2023-07-01 Christoph Müllner <christoph.muellner@vrull.eu>
+
+ RISC-V: Add support for the Zvksh ISA extension
+ Zvksh is part of the vector crypto extensions.
+
+ This extension adds the following instructions:
+ - vsm3me.vv
+ - vsm3c.vi
+
+ bfd/ChangeLog:
+
+ * elfxx-riscv.c (riscv_multi_subset_supports): Add instruction
+ class support for Zvksh.
+ (riscv_multi_subset_supports_ext): Likewise.
+
+ gas/ChangeLog:
+
+ * testsuite/gas/riscv/zvksh.d: New test.
+ * testsuite/gas/riscv/zvksh.s: New test.
+
+ include/ChangeLog:
+
+ * opcode/riscv-opc.h (MATCH_VSM3C_VI): New.
+ (MASK_VSM3C_VI): New.
+ (MATCH_VSM3ME_VV): New.
+ (MASK_VSM3ME_VV): New.
+ (DECLARE_INSN): New.
+ * opcode/riscv.h (enum riscv_insn_class): Add instruction class
+ support for Zvksh.
+
+ opcodes/ChangeLog:
+
+ * riscv-opc.c: Add Zvksh instructions.
+
+2023-07-01 Christoph Müllner <christoph.muellner@vrull.eu>
+
+ RISC-V: Add support for the Zvksed ISA extension
+ Zvksed is part of the vector crypto extensions.
+
+ This extension adds the following instructions:
+ - vsm4k.vi
+ - vsm4r.[vv,vs]
+
+ bfd/ChangeLog:
+
+ * elfxx-riscv.c (riscv_multi_subset_supports): Add instruction
+ class support for Zvksed.
+ (riscv_multi_subset_supports_ext): Likewise.
+
+ gas/ChangeLog:
+
+ * testsuite/gas/riscv/zvksed.d: New test.
+ * testsuite/gas/riscv/zvksed.s: New test.
+
+ include/ChangeLog:
+
+ * opcode/riscv-opc.h (MATCH_VSM4K_VI): New.
+ (MASK_VSM4K_VI): New.
+ (MATCH_VSM4R_VS): New.
+ (MASK_VSM4R_VS): New.
+ (MATCH_VSM4R_VV): New.
+ (MASK_VSM4R_VV): New.
+ (DECLARE_INSN): New.
+ * opcode/riscv.h (enum riscv_insn_class): Add instruction class
+ support for Zvksed.
+
+ opcodes/ChangeLog:
+
+ * riscv-opc.c: Add Zvksed instructions.
+
+2023-07-01 Christoph Müllner <christoph.muellner@vrull.eu>
+
+ RISC-V: Add support for the Zvknh[a,b] ISA extensions
+ Zvknh[a,b] are parts of the vector crypto extensions.
+
+ This extension adds the following instructions:
+ - vsha2ms.vv
+ - vsha2c[hl].vv
+
+ bfd/ChangeLog:
+
+ * elfxx-riscv.c (riscv_multi_subset_supports): Add instruction
+ class support for Zvknh[a,b].
+ (riscv_multi_subset_supports_ext): Likewise.
+
+ gas/ChangeLog:
+
+ * testsuite/gas/riscv/zvknha.d: New test.
+ * testsuite/gas/riscv/zvknha_zvknhb.s: New test.
+ * testsuite/gas/riscv/zvknhb.d: New test.
+
+ include/ChangeLog:
+
+ * opcode/riscv-opc.h (MATCH_VSHA2CH_VV): New.
+ (MASK_VSHA2CH_VV): New.
+ (MATCH_VSHA2CL_VV): New.
+ (MASK_VSHA2CL_VV): New.
+ (MATCH_VSHA2MS_VV): New.
+ (MASK_VSHA2MS_VV): New.
+ (DECLARE_INSN): New.
+ * opcode/riscv.h (enum riscv_insn_class): Add instruction class
+ support for Zvknh[a,b].
+
+ opcodes/ChangeLog:
+
+ * riscv-opc.c: Add Zvknh[a,b] instructions.
+
+2023-07-01 Christoph Müllner <christoph.muellner@vrull.eu>
+
+ RISC-V: Add support for the Zvkned ISA extension
+ Zvkned is part of the vector crypto extensions.
+
+ This extension adds the following instructions:
+ - vaesef.[vv,vs]
+ - vaesem.[vv,vs]
+ - vaesdf.[vv,vs]
+ - vaesdm.[vv,vs]
+ - vaeskf1.vi
+ - vaeskf2.vi
+ - vaesz.vs
+
+ bfd/ChangeLog:
+
+ * elfxx-riscv.c (riscv_multi_subset_supports): Add instruction
+ class support for Zvkned.
+ (riscv_multi_subset_supports_ext): Likewise.
+
+ gas/ChangeLog:
+
+ * testsuite/gas/riscv/zvkned.d: New test.
+ * testsuite/gas/riscv/zvkned.s: New test.
+
+ include/ChangeLog:
+
+ * opcode/riscv-opc.h (MATCH_VAESDF_VS): New.
+ (MASK_VAESDF_VS): New.
+ (MATCH_VAESDF_VV): New.
+ (MASK_VAESDF_VV): New.
+ (MATCH_VAESDM_VS): New.
+ (MASK_VAESDM_VS): New.
+ (MATCH_VAESDM_VV): New.
+ (MASK_VAESDM_VV): New.
+ (MATCH_VAESEF_VS): New.
+ (MASK_VAESEF_VS): New.
+ (MATCH_VAESEF_VV): New.
+ (MASK_VAESEF_VV): New.
+ (MATCH_VAESEM_VS): New.
+ (MASK_VAESEM_VS): New.
+ (MATCH_VAESEM_VV): New.
+ (MASK_VAESEM_VV): New.
+ (MATCH_VAESKF1_VI): New.
+ (MASK_VAESKF1_VI): New.
+ (MATCH_VAESKF2_VI): New.
+ (MASK_VAESKF2_VI): New.
+ (MATCH_VAESZ_VS): New.
+ (MASK_VAESZ_VS): New.
+ (DECLARE_INSN): New.
+ * opcode/riscv.h (enum riscv_insn_class): Add instruction class
+ support for Zvkned.
+
+ opcodes/ChangeLog:
+
+ * riscv-opc.c: Add Zvkned instructions.
+
+2023-07-01 Christoph Müllner <christoph.muellner@vrull.eu>
+
+ RISC-V: Add support for the Zvkg ISA extension
+ Zvkg is part of the vector crypto extensions.
+
+ This extension adds the following instructions:
+ - vghsh.vv
+ - vgmul.vv
+
+ bfd/ChangeLog:
+
+ * elfxx-riscv.c (riscv_multi_subset_supports): Add instruction
+ class support for Zvkg.
+ (riscv_multi_subset_supports_ext): Likewise.
+
+ gas/ChangeLog:
+
+ * testsuite/gas/riscv/zvkg.d: New test.
+ * testsuite/gas/riscv/zvkg.s: New test.
+
+ include/ChangeLog:
+
+ * opcode/riscv-opc.h (MATCH_VGHSH_VV): New.
+ (MASK_VGHSH_VV): New.
+ (MATCH_VGMUL_VV): New.
+ (MASK_VGMUL_VV): New.
+ (DECLARE_INSN): New.
+ * opcode/riscv.h (enum riscv_insn_class): Add instruction class
+ support for Zvkg.
+
+ opcodes/ChangeLog:
+
+ * riscv-opc.c: Add Zvkg instructions.
+
+2023-07-01 Nathan Huckleberry <nhuck@google.com>
+
+ RISC-V: Add support for the Zvbc extension
+ Zvbc is part of the crypto vector extensions.
+
+ This extension adds the following instructions:
+ - vclmul.[vv,vx]
+ - vclmulh.[vv,vx]
+
+ bfd/ChangeLog:
+
+ * elfxx-riscv.c (riscv_multi_subset_supports): Add instruction
+ class support for Zvbc.
+ (riscv_multi_subset_supports_ext): Likewise.
+
+ gas/ChangeLog:
+
+ * testsuite/gas/riscv/zvbc.d: New test.
+ * testsuite/gas/riscv/zvbc.s: New test.
+
+ include/ChangeLog:
+
+ * opcode/riscv-opc.h (MATCH_VCLMUL_VV): New.
+ (MASK_VCLMUL_VV): New.
+ (MATCH_VCLMUL_VX): New.
+ (MASK_VCLMUL_VX): New.
+ (MATCH_VCLMULH_VV): New.
+ (MASK_VCLMULH_VV): New.
+ (MATCH_VCLMULH_VX): New.
+ (MASK_VCLMULH_VX): New.
+ (DECLARE_INSN): New.
+ * opcode/riscv.h (enum riscv_insn_class): Add instruction class
+ support for Zvbc.
+
+ opcodes/ChangeLog:
+
+ * riscv-opc.c: Add Zvbc instruction.
+
+2023-07-01 Christoph Müllner <christoph.muellner@vrull.eu>
+
+ RISC-V: Add support for the Zvbb ISA extension
+ Zvbb is part of the vector crypto extensions.
+
+ This extension adds the following instructions:
+ - vandn.[vv,vx]
+ - vbrev.v
+ - vbrev8.v
+ - vrev8.v
+ - vclz.v
+ - vctz.v
+ - vcpop.v
+ - vrol.[vv,vx]
+ - vror.[vv,vx,vi]
+ - vwsll.[vv,vx,vi]
+
+ bfd/ChangeLog:
+
+ * elfxx-riscv.c (riscv_multi_subset_supports): Add instruction
+ class support for Zvbb.
+ (riscv_multi_subset_supports_ext): Likewise.
+
+ gas/ChangeLog:
+
+ * config/tc-riscv.c (validate_riscv_insn): Add 'l' as new format
+ string directive.
+ (riscv_ip): Likewise.
+ * testsuite/gas/riscv/zvbb.d: New test.
+ * testsuite/gas/riscv/zvbb.s: New test.
+
+ include/ChangeLog:
+
+ * opcode/riscv-opc.h (MATCH_VANDN_VV): New.
+ (MASK_VANDN_VV): New.
+ (MATCH_VANDN_VX): New.
+ (MASK_VANDN_VX): New.
+ (MATCH_VBREV8_V): New.
+ (MASK_VBREV8_V): New.
+ (MATCH_VBREV_V): New.
+ (MASK_VBREV_V): New.
+ (MATCH_VCLZ_V): New.
+ (MASK_VCLZ_V): New.
+ (MATCH_VCPOP_V): New.
+ (MASK_VCPOP_V): New.
+ (MATCH_VCTZ_V): New.
+ (MASK_VCTZ_V): New.
+ (MATCH_VREV8_V): New.
+ (MASK_VREV8_V): New.
+ (MATCH_VROL_VV): New.
+ (MASK_VROL_VV): New.
+ (MATCH_VROL_VX): New.
+ (MASK_VROL_VX): New.
+ (MATCH_VROR_VI): New.
+ (MASK_VROR_VI): New.
+ (MATCH_VROR_VV): New.
+ (MASK_VROR_VV): New.
+ (MATCH_VROR_VX): New.
+ (MASK_VROR_VX): New.
+ (MATCH_VWSLL_VI): New.
+ (MASK_VWSLL_VI): New.
+ (MATCH_VWSLL_VV): New.
+ (MASK_VWSLL_VV): New.
+ (MATCH_VWSLL_VX): New.
+ (MASK_VWSLL_VX): New.
+ (DECLARE_INSN): New.
+ * opcode/riscv.h (EXTRACT_RVV_VI_UIMM6): New.
+ (ENCODE_RVV_VI_UIMM6): New.
+ (enum riscv_insn_class): Add instruction class for Zvbb.
+
+ opcodes/ChangeLog:
+
+ * riscv-dis.c (print_insn_args): Add 'l' as new format string
+ directive.
+ * riscv-opc.c: Add Zvbb instructions.
+
+2023-07-01 GDB Administrator <gdbadmin@sourceware.org>
+
+ Automatic date update in version.in
+
+2023-06-30 Tom Tromey <tom@tromey.com>
+
+ Fix regressions caused by agent expression C++-ification
+ Simon pointed out that my agent expression C++-ification patches
+ caused a regression with the native-gdbserver target board. The bug
+ is that append_const is supposed to write in big-endian order, but I
+ switched this by mistake.
+
+2023-06-30 Philipp Tomsich <philipp.tomsich@vrull.eu>
+
+ binutils: NEWS: announce new RISC-V extensions
+ We picked up support for a few new extensions over the last weeks
+ (this may need further updating prior to the next release), list them
+ in the NEWS file.
+
+ binutils/ChangeLog:
+
+ * binutils/NEWS: announce suuport for the new RISC-V
+ extensions (Zicond, Zfa, XVentanaCondOps).
+
+2023-06-30 Christoph Müllner <christoph.muellner@vrull.eu>
+
+ RISC-V: Add support for the Zfa extension
+ This patch adds support for the RISC-V Zfa extension,
+ which introduces additional floating-point instructions:
+ * fli (load-immediate) with pre-defined immediates
+ * fminm/fmaxm (like fmin/fmax but with different NaN behaviour)
+ * fround/froundmx (round to integer)
+ * fcvtmod.w.d (Modular Convert-to-Integer)
+ * fmv* to access high bits of FP registers in case XLEN < FLEN
+ * fleq/fltq (quiet comparison instructions)
+
+ Zfa defines its instructions in combination with the following
+ extensions:
+ * single-precision floating-point (F)
+ * double-precision floating-point (D)
+ * quad-precision floating-point (Q)
+ * half-precision floating-point (Zfh)
+
+ This patch is based on an earlier version from Tsukasa OI:
+ https://sourceware.org/pipermail/binutils/2022-September/122939.html
+ Most significant change to that commit is the switch from the rs1-field
+ value to the actual floating-point value in the last operand of the fli*
+ instructions. Everything that strtof() can parse is accepted and
+ the '%a' printf specifier is used to output hex floating-point literals
+ in the disassembly.
+
+ The Zfa specification is frozen (and has passed public review). It is
+ available as a chapter in "The RISC-V Instruction Set Manual: Volume 1":
+ https://github.com/riscv/riscv-isa-manual/releases
+
+ bfd/ChangeLog:
+
+ * elfxx-riscv.c (riscv_multi_subset_supports): Add instruction
+ class support for 'Zfa' extension.
+ (riscv_multi_subset_supports_ext): Likewise.
+ (riscv_implicit_subsets): Add 'Zfa' -> 'F' dependency.
+
+ gas/ChangeLog:
+
+ * config/tc-riscv.c (flt_lookup): New helper to lookup a float value
+ in an array.
+ (validate_riscv_insn): Add 'Wfv' as new format string directive.
+ (riscv_ip): Likewise.
+ * doc/c-riscv.texi: Add floating-point chapter and describe
+ limiations of the Zfa FP literal parsing.
+ * testsuite/gas/riscv/zfa-32.d: New test.
+ * testsuite/gas/riscv/zfa-32.s: New test.
+ * testsuite/gas/riscv/zfa-64.d: New test.
+ * testsuite/gas/riscv/zfa-64.s: New test.
+ * testsuite/gas/riscv/zfa-fail.d: New test.
+ * testsuite/gas/riscv/zfa-fail.l: New test.
+ * testsuite/gas/riscv/zfa-fail.s: New test.
+ * testsuite/gas/riscv/zfa.d: New test.
+ * testsuite/gas/riscv/zfa.s: New test.
+ * testsuite/gas/riscv/zfa.s: New test.
+
+ * opcode/riscv-opc.h (MATCH_FLI_H): New.
+ (MASK_FLI_H): New.
+ (MATCH_FMINM_H): New.
+ (MASK_FMINM_H): New.
+ (MATCH_FMAXM_H): New.
+ (MASK_FMAXM_H): New.
+ (MATCH_FROUND_H): New.
+ (MASK_FROUND_H): New.
+ (MATCH_FROUNDNX_H): New.
+ (MASK_FROUNDNX_H): New.
+ (MATCH_FLTQ_H): New.
+ (MASK_FLTQ_H): New.
+ (MATCH_FLEQ_H): New.
+ (MASK_FLEQ_H): New.
+ (MATCH_FLI_S): New.
+ (MASK_FLI_S): New.
+ (MATCH_FMINM_S): New.
+ (MASK_FMINM_S): New.
+ (MATCH_FMAXM_S): New.
+ (MASK_FMAXM_S): New.
+ (MATCH_FROUND_S): New.
+ (MASK_FROUND_S): New.
+ (MATCH_FROUNDNX_S): New.
+ (MASK_FROUNDNX_S): New.
+ (MATCH_FLTQ_S): New.
+ (MASK_FLTQ_S): New.
+ (MATCH_FLEQ_S): New.
+ (MASK_FLEQ_S): New.
+ (MATCH_FLI_D): New.
+ (MASK_FLI_D): New.
+ (MATCH_FMINM_D): New.
+ (MASK_FMINM_D): New.
+ (MATCH_FMAXM_D): New.
+ (MASK_FMAXM_D): New.
+ (MATCH_FROUND_D): New.
+ (MASK_FROUND_D): New.
+ (MATCH_FROUNDNX_D): New.
+ (MASK_FROUNDNX_D): New.
+ (MATCH_FLTQ_D): New.
+ (MASK_FLTQ_D): New.
+ (MATCH_FLEQ_D): New.
+ (MASK_FLEQ_D): New.
+ (MATCH_FLI_Q): New.
+ (MASK_FLI_Q): New.
+ (MATCH_FMINM_Q): New.
+ (MASK_FMINM_Q): New.
+ (MATCH_FMAXM_Q): New.
+ (MASK_FMAXM_Q): New.
+ (MATCH_FROUND_Q): New.
+ (MASK_FROUND_Q): New.
+ (MATCH_FROUNDNX_Q): New.
+ (MASK_FROUNDNX_Q): New.
+ (MATCH_FLTQ_Q): New.
+ (MASK_FLTQ_Q): New.
+ (MATCH_FLEQ_Q): New.
+ (MASK_FLEQ_Q): New.
+ (MATCH_FCVTMOD_W_D): New.
+ (MASK_FCVTMOD_W_D): New.
+ (MATCH_FMVH_X_D): New.
+ (MASK_FMVH_X_D): New.
+ (MATCH_FMVH_X_Q): New.
+ (MASK_FMVH_X_Q): New.
+ (MATCH_FMVP_D_X): New.
+ (MASK_FMVP_D_X): New.
+ (MATCH_FMVP_Q_X): New.
+ (MASK_FMVP_Q_X): New.
+ (DECLARE_INSN): New.
+ * opcode/riscv.h (enum riscv_insn_class): Add instruction
+ classes for the Zfa extension.
+
+ opcodes/ChangeLog:
+
+ * riscv-dis.c (print_insn_args): Add support for
+ new format string directive 'Wfv'.
+ * riscv-opc.c: Add Zfa instructions.
+
+ Co-Developed-by: Tsukasa OI <research_trasio@irq.a4lg.com>
+ Co-Developed-by: Philipp Tomsich <philipp.tomsich@vrull.eu>
+ Acked-by: Palmer Dabbelt <palmer@rivosinc.com>
+
+2023-06-30 Nick Clifton <nickc@redhat.com>
+
+ strings: Improve code to detect excessively large minimum string lengths.
+ PR 30598
+ * strings.c (set_string_min): New function. (main): Use it. (print_unicode_stream): Calculate buffer size using a size_t.
+
+ Prevent an illegal memory access when running the strings program with an excessively lerge minimum string length.
+ PR 30595
+ * strings.c (main): Check for an excessively large minimum string length.
+
+ Fix used-before-initialized warnings when compiling elf.c with Clang-16.
+
+2023-06-30 mengqinggang <mengqinggang@loongson.cn>
+
+ LoongArch: gas: Fix code style issues
+ Blocks of 8 spaces be replaced with tabs.
+ Fix alignment issues.
+
+2023-06-30 mengqinggang <mengqinggang@loongson.cn>
+
+ LoongArch: gas: Add LVZ and LBT instructions support
+ gas/ChangeLog:
+ * config/tc-loongarch.c (md_parse_option): Add LARCH_opts.ase_lvz and
+ LARCH_opts.ase_lbt.
+ * testsuite/gas/loongarch/uleb128.d: Regenerated.
+ * testsuite/gas/loongarch/lvz-lbt.d: New test.
+ * testsuite/gas/loongarch/lvz-lbt.s: New test.
+
+ include/ChangeLog:
+ * opcode/loongarch.h (ase_lvz): New.
+ (ase_lbt): New.
+
+ opcodes/ChangeLog:
+ * loongarch-dis.c (set_default_loongarch_dis_options): Add
+ LARCH_opts.ase_lvz and LARCH_opts.ase_lbt.
+ * loongarch-opc.c (struct loongarch_ase): Add LVZ and LBT instructions.
+
+2023-06-30 WANG Xuerui <git@xen0n.name>
+
+ LoongArch: Deprecate $v[01], $fv[01] and $x names per spec
+ As outlined in the LoongArch ELF psABI spec [1], it is actually already
+ 2 versions after the initial LoongArch support, and the $v[01] and
+ $fv[01] names should really get sunset by now.
+
+ In addition, the "$x" name for $r21 was never included in any released
+ version of the ABI spec, and such usages are all fixed to say just $r21
+ for every project I could think of that accepted a LoongArch port.
+
+ Plus, the upcoming LSX/LASX support makes use of registers named
+ "$vrNN" and "$xrNN", so having "$vN" and "$x" alongside would almost
+ certainly create confusion for developers.
+
+ Issue warnings for such usages per the deprecation procedure detailed
+ in the spec, so we can finally remove support in the next release cycle
+ after this.
+
+ [1]: https://loongson.github.io/LoongArch-Documentation/LoongArch-ELF-ABI-EN.html
+
+ gas/ChangeLog:
+
+ * config/tc-loongarch.c: Init canonical register ABI name
+ mappings and deprecated register names.
+ (loongarch_args_parser_can_match_arg_helper): Warn in case of
+ deprecated register name usage.
+ * testsuite/gas/loongarch/deprecated_reg_aliases.d: New test.
+ * testsuite/gas/loongarch/deprecated_reg_aliases.l: Likewise.
+ * testsuite/gas/loongarch/deprecated_reg_aliases.s: Likewise.
+
+ include/ChangeLog:
+
+ * opcode/loongarch.h: Rename global variables.
+
+ opcodes/ChangeLog:
+
+ * loongarch-opc.c: Rename the alternate/deprecated register name
+ mappings, and move $x to the deprecated name map.
+
+2023-06-30 WANG Xuerui <git@xen0n.name>
+
+ opcodes/loongarch: print unrecognized insn words with the .word directive
+ For better round-trip fidelity and readability in general.
+
+ gas/ChangeLog:
+
+ * testsuite/gas/loongarch/uleb128.d: Update test case.
+ * testsuite/gas/loongarch/raw-insn.d: New test.
+ * testsuite/gas/loongarch/raw-insn.s: Likewise.
+
+ opcodes/ChangeLog:
+
+ * loongarch-dis.c (disassemble_one): Print ".word" if !opc.
+
+2023-06-30 WANG Xuerui <git@xen0n.name>
+
+ opcodes/loongarch: do not print hex notation for signed immediates
+ The additional hex notation was minimally useful when one had to
+ inspect code with heavy bit manipulation, or of unclear signedness, but
+ it clutters the output, and the style is not regular assembly language
+ syntax either.
+
+ Precisely how one approaches the original use case is not taken care of
+ in this patch (maybe we want a disassembler option forcing a certain
+ style for immediates, like for example printing every immediate in
+ decimal or hexadecimal notation), but at least let's stop the current
+ practice.
+
+ ChangeLog:
+
+ * testsuite/gas/loongarch/imm_ins.d: Update test case.
+ * testsuite/gas/loongarch/imm_ins_32.d: Likewise.
+ * testsuite/gas/loongarch/imm_op.d: Likewise.
+ * testsuite/gas/loongarch/jmp_op.d: Likewise.
+ * testsuite/gas/loongarch/load_store_op.d: Likewise.
+ * testsuite/gas/loongarch/macro_op.d: Likewise.
+ * testsuite/gas/loongarch/macro_op_32.d: Likewise.
+ * testsuite/gas/loongarch/privilege_op.d: Likewise.
+ * testsuite/gas/loongarch/uleb128.d: Likewise.
+ * testsuite/gas/loongarch/vector.d: Likewise.
+
+ ld/ChangeLog:
+
+ * testsuite/ld-loongarch-elf/jmp_op.d: Update test case.
+ * testsuite/ld-loongarch-elf/macro_op.d: Likewise.
+ * testsuite/ld-loongarch-elf/macro_op_32.d: Likewise.
+
+ opcodes/ChangeLog:
+
+ * loongarch-dis.c (dis_one_arg): Remove the "(0x%x)" part from
+ disassembly output of signed immediate operands.
+
+2023-06-30 WANG Xuerui <git@xen0n.name>
+
+ opcodes/loongarch: style disassembled address offsets as such
+ Add a modifier char 'o' telling the disassembler to print the immediate
+ using the address offset style, and mark the memory access instructions'
+ offset operands as such.
+
+ opcodes/ChangeLog:
+
+ * loongarch-dis.c (dis_one_arg): Style disassembled address
+ offsets as such when the operand has a modifier char 'o'.
+ * loongarch-opc.c: Add 'o' to operands that represent address
+ offsets.
+
+2023-06-30 WANG Xuerui <git@xen0n.name>
+
+ opcodes/loongarch: implement style support in the disassembler
+ Update the LoongArch disassembler to supply style information to the
+ disassembler output. The output formatting remains unchanged.
+
+ opcodes/ChangeLog:
+
+ * disassemble.c: Mark LoongArch as created_styled_output=true.
+ * loongarch-dis.c (dis_one_arg): Use fprintf_styled_func
+ throughout with proper styles.
+
+2023-06-30 WANG Xuerui <git@xen0n.name>
+
+ opcodes/loongarch: remove unused code
+ Remove some unused declarations and code.
+
+ include/ChangeLog:
+
+ * opcode/loongarch.h: Remove unused declarations.
+
+ opcodes/ChangeLog:
+
+ * loongarch-dis.c (loongarch_parse_dis_options): Remove.
+ (my_print_address_func): Likewise.
+ (loongarch_disassemble_one): Likewise.
+
+2023-06-30 WANG Xuerui <git@xen0n.name>
+
+ LoongArch: support disassembling certain pseudo-instructions
+ Add a flag in the pinfo field for being able to mark certain specialized
+ matchers as disassembler-only, so some degree of isolation between
+ assembler-side and disassembler-side can be achieved.
+
+ This isolation is necessary, firstly because some pseudo-instructions
+ cannot be fully described in the opcode table, like `li.[wd]`, so the
+ corresponding opcode entry cannot have meaningful match/mask values.
+ Secondly, some of these pseudo-instructions can be realized in more than
+ one plausible ways; e.g. `li.w rd, <something between 0 and 0x7ff>` can
+ be realized on LA64 with any of `addi.w`, `addi.d` or `ori`. If we tie
+ disassembly of such aliases with the corresponding GAS support, only one
+ canonical form among the above would be recognized as `li.w`, and it
+ would mildly impact the readability of disassembly output.
+ People wanting the exact disassembly can always set `-M no-aliases` to
+ get the original behavior back.
+
+ In addition, in certain cases, information is irreversibly lost after
+ assembling, so perfect round-trip would not be possible in such cases.
+ For example, `li.w` and `li.d` of immediates within int32_t range
+ produce the same code; in this patch, `addi.d rd, $zero, imm` is treated
+ as `li.d`, while `addi.w` and `ori` immediate loads are shown as `li.w`,
+ due to the expressible value range well within 32 bits.
+
+ gas/ChangeLog:
+
+ * config/tc-loongarch.c (get_loongarch_opcode): Ignore
+ disassembler-only aliases.
+ * testsuite/gas/loongarch/64_pcrel.d: Update test case.
+ * testsuite/gas/loongarch/imm_ins.d: Likewise.
+ * testsuite/gas/loongarch/imm_ins_32.d: Likewise.
+ * testsuite/gas/loongarch/jmp_op.d: Likewise.
+ * testsuite/gas/loongarch/li.d: Likewise.
+ * testsuite/gas/loongarch/macro_op.d: Likewise.
+ * testsuite/gas/loongarch/macro_op_32.d: Likewise.
+ * testsuite/gas/loongarch/macro_op_large_abs.d: Likewise.
+ * testsuite/gas/loongarch/macro_op_large_pc.d: Likewise.
+ * testsuite/gas/loongarch/nop.d: Likewise.
+ * testsuite/gas/loongarch/relax_align.d: Likewise.
+ * testsuite/gas/loongarch/reloc.d: Likewise.
+
+ include/ChangeLog:
+
+ * opcode/loongarch.h (INSN_DIS_ALIAS): Add.
+
+ ld/ChangeLog:
+
+ * testsuite/ld-loongarch-elf/jmp_op.d: Update test case.
+ * testsuite/ld-loongarch-elf/macro_op.d: Likewise.
+ * testsuite/ld-loongarch-elf/macro_op_32.d: Likewise.
+ * testsuite/ld-loongarch-elf/relax-align.dd: Likewise.
+
+ opcodes/ChangeLog:
+
+ * loongarch-dis.c: Move register name map declarations to top.
+ (get_loongarch_opcode_by_binfmt): Consider aliases when
+ disassembling without the no-aliases option.
+ (parse_loongarch_dis_option): Support the no-aliases option.
+ * loongarch-opc.c: Collect pseudo instructions into a new
+ dedicated table.
+
+2023-06-30 GDB Administrator <gdbadmin@sourceware.org>
+
+ Automatic date update in version.in
+
+2023-06-30 Indu Bhagat <indu.bhagat@oracle.com>
+
+ binutils/NEWS: announce SFrame version 2 as the new default
+
+2023-06-30 Indu Bhagat <indu.bhagat@oracle.com>
+
+ doc: sframe: update specification for SFRAME_VERSION_2
+ Add details for the changes made from Version 1 to Version 2 of the format.
+
+ Also add details about alignment in the SFrame format. A portion of the
+ SFrame stack trace format has an unaligned on-disk representation. Add
+ description at relevant points in the specificatin to clarify the
+ alignment related details.
+
+2023-06-30 Indu Bhagat <indu.bhagat@oracle.com>
+
+ sframe: bfd: gas: ld: format bump to SFrame version 2
+ SFrame version 2 encodes the size of repetitive insn block explicitly
+ in the format. Add information in the SFrame FDE to convey the size
+ of the block of repeating instructions. This information is used only
+ for SFrame FDEs of type SFRAME_FDE_TYPE_PCMASK.
+
+ Introduce two extra bytes for padding: this ensures that the memory
+ accesses to the members of the SFrame Frame Descriptor Entry (FDE) are
+ naturally aligned.
+
+ gas generates SFrame section with version SFRAME_VERSION_2 by default.
+
+ libsframe provides two new APIs to:
+ - get an SFrame FDE data from the decoder context, and
+ - add an SFrame FDE to the encoder context.
+ The additional argument (for rep_block_size) is useful for SFrame FDEs
+ where FDE type is SFRAME_FDE_TYPE_PCMASK.
+
+ The linker will generate the output SFrame sections in the
+ SFRAME_VERSION_2 format. If the input sections offered to the linker
+ are not all in the SFRAME_VERSION_2 format, the linker issues an error
+ to the user.
+
+ objdump/readelf will show the following message to the user if .sframe
+ section in SFRAME_VERSION_1 format is seen:
+
+ "No further information can be displayed. SFrame version not
+ supported."
+
+ In other words, like the rest of the binutils, only the current SFrame
+ format version, i.e., SFRAME_VERSION_2 is supported by the textual dump
+ facilities.
+
+ bfd/
+ * elf-sframe.c (_bfd_elf_merge_section_sframe): Generate an
+ output SFrame section with version SFRAME_VERSION_2. Also,
+ error out if the SFrame sections do not all have
+ SFRAME_VERSION_2.
+ * elfxx-x86.c (_bfd_x86_elf_create_sframe_plt): Generate SFrame
+ section for plt entries with version SFRAME_VERSION_2.
+ gas/
+ * gen-sframe.c (sframe_set_version): Update to SFRAME_VERSION_2.
+ (output_sframe): Likewise.
+ gas/testsuite/
+ * gas/cfi-sframe/cfi-sframe-aarch64-1.d: Use SFRAME_VERSION_2.
+ * gas/cfi-sframe/cfi-sframe-aarch64-2.d: Likewise.
+ * gas/cfi-sframe/cfi-sframe-aarch64-pac-ab-key-1.d: Likewise.
+ * gas/cfi-sframe/cfi-sframe-common-1.d: Likewise.
+ * gas/cfi-sframe/cfi-sframe-common-2.d: Likewise.
+ * gas/cfi-sframe/cfi-sframe-common-3.d: Likewise.
+ * gas/cfi-sframe/cfi-sframe-common-4.d: Likewise.
+ * gas/cfi-sframe/cfi-sframe-common-5.d: Likewise.
+ * gas/cfi-sframe/cfi-sframe-common-6.d: Likewise.
+ * gas/cfi-sframe/cfi-sframe-common-7.d: Likewise.
+ * gas/cfi-sframe/cfi-sframe-common-8.d: Likewise.
+ * gas/cfi-sframe/cfi-sframe-x86_64-1.d: Likewise.
+ * gas/cfi-sframe/common-empty-1.d: Likewise.
+ * gas/cfi-sframe/common-empty-2.d: Likewise.
+ * gas/cfi-sframe/common-empty-3.d: Likewise.
+ ld/testsuite/
+ * ld-aarch64/sframe-simple-1.d: Adjust for SFRAME_VERSION_2.
+ * ld-x86-64/sframe-plt-1.d: Likewise.
+ * ld-x86-64/sframe-simple-1.d: Likewise.
+ libsframe/
+ * libsframe.ver: Add the new APIs.
+ * sframe.c (sframe_decoder_get_funcdesc_v2): New definition.
+ (sframe_encoder_add_funcdesc_v2): Likewise.
+ (sframe_header_sanity_check_p): Include SFRAME_VERSION_2.
+ (sframe_fre_check_range_p): Get rep_block_size info from SFrame
+ FDE.
+ * sframe-dump.c (dump_sframe_header): Add support for
+ SFRAME_VERSION_2.
+ (dump_sframe): Inform user if SFrame section in SFRAME_VERSION_1
+ format is seen.
+ libsframe/testsuite/
+ * libsframe.decode/DATA-BE: Regenerated data file.
+ * libsframe.decode/DATA1: Likewise.
+ * libsframe.decode/DATA2: Likewise.
+ * libsframe.find/plt-findfre-1.c: Use new API in the testcase.
+ include/
+ * sframe.h: Add member to encode size of the code block of
+ repeating instructions. Add 2 bytes of padding.
+ * sframe-api.h (sframe_decoder_get_funcdesc_v2): New
+ declaration.
+ (sframe_encoder_add_funcdesc_v2): Likewise.
+
+2023-06-30 Indu Bhagat <indu.bhagat@oracle.com>
+
+ libsframe: add new APIs to get SFrame version
+ While the SFrame preamble is guaranteed to not change between versions,
+ providing these access APIs from the SFrame decoder and encoder APIs is
+ for convenience only. The linker may want to use these APIs as the
+ format evolves.
+
+ include/
+ * sframe-api.h (sframe_decoder_get_version): New declaration.
+ (sframe_encoder_get_version): Likewise.
+
+ libsframe/
+ * libsframe/libsframe.ver: Add new APIs.
+ * libsframe/sframe.c (sframe_decoder_get_version): New
+ definition.
+ (sframe_encoder_get_version): Likewise.
+
+2023-06-29 Indu Bhagat <indu.bhagat@oracle.com>
+
+ libsframe: fix sframe_find_fre for pltN entries
+ For a toy application on x86_64, for example, following is the SFrame
+ stack trace information for the 3 pltN entries of 16 bytes each:
+
+ func idx [1]: pc = 0x401030, size = 48 bytes
+ STARTPC[m] CFA FP RA
+ 0000000000000000 sp+8 u u
+ 000000000000000b sp+16 u u
+
+ The data in first column is the start_ip_offset. Also note that the FDE
+ is of type SFRAME_FDE_TYPE_PCMASK (denoted by the [m] on LHS).
+
+ Where each pltN (note: excluding plt0 entry) entry looks like:
+
+ 401030: jmp *0x2fca(%rip)
+ 401036: push $0x0
+ 40103b: jmp 401020<_init+0x20>
+
+ 401040: jmp *0x2fc2(%rip)
+ 401046: push $0x1
+ 40104b: jmp 401020<_init+0x20>
+
+ 401050: jmp *0x2fba(%rip)
+ 401056: push $0x2
+ 40105b: jmp 401020<_init+0x20>
+
+ Now, to find SFrame stack trace information from an FDE of type
+ SFRAME_FDE_TYPE_PCMASK, sframe_find_fre () was doing an operation
+ like,
+ (start_ip_offset & 0xf) >= (pc & 0xf)
+
+ This works for pltN entry of size, say, less than 16 bytes. But if the
+ pltN entries or similar code stubs (for which SFrame FDE of type
+ SFRAME_FDE_TYPE_PCMASK may be used), evolve to be of size > 16 bytes,
+ this will cease to work.
+
+ To match the range covered by the SFrame FRE, one should instead perform
+ a modulo operation. The constant for the modulo operation must be the
+ size of the pltN entry. Further, this constant should ideally be
+ encoded in the format, as it may be different for each ABI.
+
+ In SFrame Version 2 of the format, we will move towards encoding it
+ explicitly in the SFrame FDE. For now, fix up the logic to at least
+ move towards modulo operation.
+
+ libsframe/
+ * sframe.c (sframe_fre_check_range_p): New definition.
+ (sframe_find_fre): Refactor a bit and use the new definition
+ above.
+ include/
+ * sframe.h (SFRAME_FDE_TYPE_PCMASK): Update comment.
+ libsframe/doc/
+ * sframe-spec.texi: Fix the text for SFRAME_FDE_TYPE_PCMASK FDE
+ type.
+
+2023-06-29 H.J. Lu <hjl.tools@gmail.com>
+
+ ld: Add -z nosectionheader test to bootstrap.exp
+ PR ld/25617
+ * testsuite/ld-bootstrap/bootstrap.exp: Add -z nosectionheader
+ test.
+
+2023-06-29 H.J. Lu <hjl.tools@gmail.com>
+
+ ld: Add tests for -z nosectionheader and --strip-section-headers
+ Add tests to verify that the linker option, -z nosectionheader and
+ objcopy and strip option, --strip-section-headers, work correctly as well
+ as linker issues an error when dynamic symbol table from PT_DYNAMIC
+ segment is used.
+
+ PR ld/25617
+ * testsuite/ld-elf/hash-2.d: New file.
+ * testsuite/ld-elf/no-section-header.exp: Likewise.
+ * testsuite/ld-elf/pr25617-1-no-sec-hdr.nd: Likewise.
+ * testsuite/ld-elf/pr25617-1-no-sec-hdr.rd: Likewise.
+ * testsuite/ld-elf/pr25617-1-static-no-sec-hdr.rd: Likewise.
+ * testsuite/ld-elf/pr25617-1a-no-sec-hdr.nd: Likewise.
+ * testsuite/ld-elf/pr25617-1a-no-sec-hdr.rd: Likewise.
+ * testsuite/ld-elf/pr25617-1a-sec-hdr.rd: Likewise.
+ * testsuite/ld-elf/pr25617-1a.c: Likewise.
+ * testsuite/ld-elf/pr25617-1b.c: Likewise.
+ * testsuite/ld-elf/start-noheader.rd: Likewise.
+ * testsuite/ld-elf/start-shared-noheader-gnu.rd: Likewise.
+ * testsuite/ld-elf/start-shared-noheader-sysv.rd: Likewise.
+ * testsuite/ld-elf/start-shared-noheader.nd: Likewise.
+
+2023-06-29 H.J. Lu <hjl.tools@gmail.com>
+
+ binutils: Add a --strip-section-headers test
+ PR ld/25617
+ * testsuite/binutils-all/objcopy.exp: Run strip-section-headers-1.
+ * testsuite/binutils-all/strip-section-headers-1.d: New file.
+
+2023-06-29 Kaylee Blake <klkblake@gmail.com>
+
+ ld: Add simple tests for -z nosectionheader
+ 2020-06-06 Kaylee Blake <klkblake@gmail.com>
+ H.J. Lu <hongjiu.lu@intel.com>
+
+ PR ld/25617
+ * testsuite/ld-elf/nosectionheader-1.d: New file.
+ * testsuite/ld-elf/nosectionheader-2.d: Likewise.
+
+2023-06-29 H.J. Lu <hjl.tools@gmail.com>
+
+ bfd: Improve nm and objdump without section header
+ When there is no section header in an executable or shared library, we
+ reconstruct dynamic symbol table from the PT_DYNAMIC segment, which
+ contains DT_HASH/DT_GNU_HASH/DT_MIPS_XHASH, DT_STRTAB, DT_SYMTAB,
+ DT_STRSZ, and DT_SYMENT entries, to improve nm and objdump. For DT_HASH,
+ the number of dynamic symbol table entries equals the number of chains.
+ For DT_GNU_HASH/DT_MIPS_XHASH, only defined symbols with non-STB_LOCAL
+ indings are in hash table. Since DT_GNU_HASH/DT_MIPS_XHASH place all
+ symbols with STB_LOCAL binding before symbols with other bindings and
+ all undefined symbols defined ones in dynamic symbol table, the highest
+ symbol index in DT_GNU_HASH/DT_MIPS_XHASH is the highest dynamic symbol
+ table index. We can also get symbol version from DT_VERSYM, DT_VERDEF
+ and DT_VERNEED entries.
+
+ dt_symtab, dt_versym, dt_verdef, dt_verneed, dt_symtab_count,
+ dt_verdef_count, dt_verneed_count and dt_strtab are added to
+ elf_obj_tdata to store dynamic symbol table information.
+
+ PR ld/25617
+ * elf-bfd.h (elf_obj_tdata): Add dt_symtab, dt_verdef, dt_verneed,
+ dt_symtab_count, dt_verdef_count, dt_verneed_count and dt_strtab.
+ (elf_use_dt_symtab_p): New.
+ (_bfd_elf_get_dynamic_symbols): Likewise.
+ (_bfd_elf_get_section_from_dynamic_symbol): Likewise.
+ * elf.c (bfd_elf_get_elf_syms): Use dynamic symbol table if
+ neeeded.
+ (_bfd_elf_get_dynamic_symtab_upper_bound): Likewise.
+ (_bfd_elf_slurp_version_tables): Likewise.
+ (offset_from_vma): New function.
+ (get_hash_table_data): Likewise.
+ (_bfd_elf_get_dynamic_symbols): Likewise.
+ (_bfd_elf_get_section_from_dynamic_symbol): Likewise.
+ (_bfd_elf_get_symbol_version_name): Likewise.
+ * elfcode.h (elf_object_p): Call _bfd_elf_get_dynamic_symbols
+ to reconstruct dynamic symbol table from PT_DYNAMIC segment if
+ there is no section header.
+ (elf_slurp_symbol_table): Use dynamic symbol table if neeeded.
+ Don't free isymbuf when dynamic symbol table is used.
+ * elflink.c (elf_link_is_defined_archive_symbol): Return wrong
+ format error when dynamic symbol table is used.
+ (elf_link_add_object_symbols): Likewise.
+
+2023-06-29 H.J. Lu <hjl.tools@gmail.com>
+
+ ELF: Discard non-alloc sections without section header
+ Discard non-alloc sections when section headers are stripped.
+
+ bfd/
+
+ PR ld/25617
+ * elf.c (_bfd_elf_assign_file_positions_for_non_load): Skip
+ non-load sections without section header.
+ (_bfd_elf_write_object_contents): Don't set the sh_name field
+ without section header. Write out the .shstrtab section only
+ if its sh_offset field isn't -1.
+
+ binutils/
+
+ PR ld/25617
+ * objcopy.c (is_strip_section_1): Remove non-alloc sections for
+ --strip-section-headers.
+
+ ld/
+
+ PR ld/25617
+ * ldlang.c (lang_discard_section_p): Discard non-alloc sections
+ if we are stripping section headers.
+
+2023-06-29 Kaylee Blake <klkblake@gmail.com>
+
+ ELF: Strip section header in ELF objects
+ Section header isn't mandatory on ELF executable nor shared library.
+ This patch adds a new linker option, -z nosectionheader, to omit ELF
+ section header, a new objcopy and strip option, --strip-section-headers,
+ to remove ELF section headers.
+
+ bfd/
+
+ 2023-06-06 H.J. Lu <hongjiu.lu@intel.com>
+ Kaylee Blake <klkblake@gmail.com>
+
+ PR ld/25617
+ * bfd.c (BFD_NO_SECTION_HEADER): New.
+ (BFD_FLAGS_SAVED): Add BFD_NO_SECTION_HEADER.
+ (BFD_FLAGS_FOR_BFD_USE_MASK): Likewise.
+ * elfcode.h (elf_swap_ehdr_out): Omit section header with
+ BFD_NO_SECTION_HEADER.
+ (elf_write_shdrs_and_ehdr): Likewise.
+ * elfxx-target.h (TARGET_BIG_SYM): Add BFD_NO_SECTION_HEADER
+ to object_flags.
+ (TARGET_LITTLE_SYM): Likewise.
+ * bfd-in2.h: Regenerated.
+
+ binutils/
+
+ 2023-06-06 H.J. Lu <hongjiu.lu@intel.com>
+
+ PR ld/25617
+ * NEWS: Mention --strip-section-headers for objcopy and strip.
+ * objcopy.c (strip_section_headers): New.
+ (command_line_switch): Add OPTION_STRIP_SECTION_HEADERS.
+ (strip_options): Add --strip-section-headers.
+ (copy_options): Likewise.
+ (copy_usage): Add --strip-section-headers.
+ (strip_usage): Likewise.
+ (copy_object): Handle --strip-section-headers for ELF files.
+ (strip_main): Handle OPTION_STRIP_SECTION_HEADERS.
+ (copy_main): Likewise.
+ * doc/binutils.texi: Document --strip-section-headers for objcopy
+ and strip.
+
+ ld/
+
+ 2023-06-06 H.J. Lu <hongjiu.lu@intel.com>
+ Kaylee Blake <klkblake@gmail.com>
+
+ PR ld/25617
+ * NEWS: Mention -z nosectionheader.
+ * emultempl/elf.em: Support -z sectionheader and
+ -z nosectionheader.
+ * ld.h (ld_config_type): Add no_section_header.
+ * ld.texi: Document -z sectionheader and -z nosectionheader.
+ * ldlang.c (ldlang_open_output): Handle
+ config.no_section_header.
+ * lexsup.c (parse_args): Enable --strip-all with
+ -z nosectionheader. Disallow -r with -z nosectionheader.
+ (elf_static_list_options): Add -z sectionheader and
+ -z nosectionheader.
+
+2023-06-29 Matthias Klose <doko@debian.org>
+
+ Ignore --prefix-file-map compiler option whist running testsuite.
+
+ ignore lto-wrapper warnings for lto builds.
+ I see these warnings from time to time, when configuring a build with --enable-pgo-build=lto, I haven't yet found out why I see these sometime, and why not. E.g. https://gcc.gnu.org/PR109241. Just ignore these when they appear in test cases. lto-wrapper: warning: using serial compilation of N LTRANS jobs
+
+2023-06-29 GDB Administrator <gdbadmin@sourceware.org>
+
+ Automatic date update in version.in
+
+2023-06-28 Vladimir Mezentsev <vladimir.mezentsev@oracle.com>
+
+ gprofng: Add new tests
+ gprofng/ChangeLog
+ 2023-06-26 Vladimir Mezentsev <vladimir.mezentsev@oracle.com>
+
+ * Makefile.am: Pass CLOCK_GETTIME_LINK to the testsuite
+ * Makefile.in: Rebuild.
+ * testsuite/gprofng.display/gp-archive.exp: New file.
+ * testsuite/gprofng.display/gp-collect-app_F.exp: New file.
+ * testsuite/gprofng.display/setpath_map.exp: New file.
+ * testsuite/lib/smalltest.c: New file.
+
+2023-06-28 Andrew Carlotti <andrew.carlotti@arm.com>
+
+ aarch64: Remove version dependencies from features
+ Many instructions were enabled only when both a feature flag and a minimum
+ architecture version are specified. This behaviour differs from GCC, which (in
+ most cases) allows features to be enabled at any architecture version.
+
+ There is no need for the toolchain to restrict combinations of unrelated
+ features in this way, so this patch removes the unnecessary dependencies.
+
+2023-06-28 Tom Tromey <tromey@adacore.com>
+
+ Remove Python 2 from gdb documentation
+ GDB can't be built using Python 2 any more, so remove the remaining
+ vestiges of this from the documentation.
+
+ Approved-By: Eli Zaretskii <eliz@gnu.org>
+
+2023-06-28 Michael Matz <matz@suse.de>
+
+ section-match: Check parent archive name as well
+ rewriting the section matching routines lost a special case
+ of matching: section statements of the form
+
+ NAME(section-glob)
+
+ normally match against NAME being an object file, but like in
+ the exclude list we happened to accept archive names as NAME
+ (undocumented). The documented way to specify (all) archive members
+ is by using e.g.
+
+ lib.a:(section-glob)
+
+ (that does work also with the prefix tree matcher).
+
+ But I intended to not actually change behaviour with the prefix
+ tree implementation. So, let's also implement checking against
+ archive names with a similar FIXME comment we already have in
+ walk_wild_file_in_exclude_list.
+
+ PR 30590
+
+ ld/
+ * ldlang.c (walk_wild_section_match): Also look at archive
+ parents for a name match.
+
+2023-06-28 Tom Tromey <tromey@adacore.com>
+
+ Fix handling of DW_TAG_unspecified_type for Ada
+ Commit 80eaec735e ("[gdb/symtab] Handle named DW_TAG_unspecified_type
+ DIE") changed the handling of DW_TAG_unspecified_type. Before this
+ change, such types were not entered into the symbol table.
+
+ It turns out that, when such a type is in the symtab, it can cause
+ failures in Ada. In particular, a private type in another package may
+ be seen locally as "void".
+
+ Now, it would probably be better to fix this via check_typedef.
+ However, that is somewhat difficult given the state of the DWARF
+ reader -- in particular with gdb_index, this would require expanding
+ potentially many CUs to find the correct type.
+
+ Instead, this patch changes gdb to not enter a symbol for an
+ unspecified type -- but only for Ada.
+
+2023-06-28 Tom Tromey <tromey@adacore.com>
+
+ Remove some Python 2 code
+ I found some Python 2 compatibility code in gdb's Python library.
+ There's no need for this any more, so this removes it. There is still
+ a bit more of this remaining in __init__.py, but I haven't tried
+ removing that yet.
+
+ Reviewed-By: Bruno Larsen <blarsen@redhat.com>
+
+2023-06-28 Nick Clifton <nickc@redhat.com>
+
+ Stop the linker's --dependency-file option from including temporary lto files.
+ PR 30568
+ * ldfile.c (ldfile_try_open_bfd): Do not track lto generated temporary files.
+
+ Updated French translation for the gold sub-directory
+
+2023-06-28 mengqinggang <mengqinggang@loongson.cn>
+
+ LoongArch: gas: Add LSX and LASX instructions test
+ gas/ChangeLog:
+
+ * testsuite/gas/loongarch/vector.d: New test.
+ * testsuite/gas/loongarch/vector.s: New test.
+
+2023-06-28 mengqinggang <mengqinggang@loongson.cn>
+
+ LoongArch: gas: Add lsx and lasx instructions support
+ gas/ChangeLog:
+
+ * config/tc-loongarch.c (md_parse_option): Add lsx and lasx option.
+ (loongarch_after_parse_args): Add lsx and lasx option.
+
+ opcodes/ChangeLog:
+
+ * loongarch-opc.c (struct loongarch_ase): Add lsx and lasx
+ instructions.
+
+2023-06-28 mengqinggang <mengqinggang@loongson.cn>
+
+ LoongArch: Add R_LARCH_64_PCREL relocation support
+ Gas defaults to emit R_LARCH_ADD64/R_LARCH_SUB64 unless explcitly declared
+ to emit R_LARCH_64_PCREL.
+
+ The LoongArch ABI at here:
+ https://github.com/loongson/la-abi-specs/blob/release/la-abi.adoc
+
+ bfd/ChangeLog:
+
+ * bfd-in2.h (not): Add R_LARCH_64_PCREL
+ * elfnn-loongarch.c (perform_relocation): Likewise.
+ * elfxx-loongarch.c: Likewise.
+ * libbfd.h: Likewise.
+ * reloc.c: Likewise.
+
+ gas/ChangeLog:
+
+ * config/tc-loongarch.c (loongarch_args_parser_can_match_arg_helper):
+ (md_apply_fix): Add R_LARCH_64_PCREL.
+ * testsuite/gas/loongarch/64_pcrel.d: New test.
+ * testsuite/gas/loongarch/64_pcrel.s: New test.
+
+ include/ChangeLog:
+
+ * elf/loongarch.h (RELOC_NUMBER): Add R_LARCH_64_PCREL.
+
+ ld/ChangeLog:
+
+ * testsuite/ld-loongarch-elf/ld-loongarch-elf.exp: Add test.
+ * testsuite/ld-loongarch-elf/64_pcrel.d: New test.
+ * testsuite/ld-loongarch-elf/64_pcrel.s: New test.
+
+2023-06-28 GDB Administrator <gdbadmin@sourceware.org>
+
+ Automatic date update in version.in
+
+2023-06-27 Indu Bhagat <indu.bhagat@oracle.com>
+
+ binutils/NEWS: add note about upcoming libsframe changes
+ Some of these changes update the ABI in an incompatible way.
+
+2023-06-27 Indu Bhagat <indu.bhagat@oracle.com>
+
+ libsframe: bfd: use uint32_t for return type of get_num_fidx APIs
+ Keep the data types usage in libsframe look consistent.
+
+ bfd/
+ * elf-sframe.c (_bfd_elf_merge_section_sframe): Use uint32_t
+ type alias.
+ * libsframe/sframe.c (sframe_decoder_get_funcdesc_at_index):
+ Likewise.
+ (sframe_decoder_get_num_fidx): Likewise.
+ (sframe_encoder_get_num_fidx): Likewise.
+ include/
+ * sframe-api.h (sframe_decoder_get_num_fidx): Likewise.
+ (sframe_encoder_get_num_fidx): Likewise.
+
+2023-06-27 Indu Bhagat <indu.bhagat@oracle.com>
+
+ libsframe: use appropriate data types for args of sframe_encode
+ include/
+ * sframe-api.h (sframe_encode): Use of uint8_t is more
+ appropriate.
+ libsframe/
+ * sframe.c (sframe_encode): Likewise.
+
+2023-06-27 Indu Bhagat <indu.bhagat@oracle.com>
+
+ libsframe: use uint8_t for return type of sframe_fre_get_base_reg_id
+ Use a more appropriate data type.
+
+ include/
+ * sframe-api.h (sframe_fre_get_base_reg_id): Use uint8_t as
+ return type.
+ libsframe/
+ * sframe-dump.c (dump_sframe_func_with_fres): Use uint8_t type
+ for base reg id.
+ * sframe.c (sframe_fre_get_base_reg_id): Use uin8_t as return
+ type.
+
+2023-06-27 Indu Bhagat <indu.bhagat@oracle.com>
+
+ libsframe: use uint8_t instead of unsigned char for abi_arch
+ Use uint8_t consistently for identifying ABI/arch in SFrame format.
+
+ bfd/
+ * elf-sframe.c (_bfd_elf_merge_section_sframe):
+ libsframe/
+ * sframe-dump.c (is_sframe_abi_arch_aarch64): Use uint8_t for
+ local variable.
+ * sframe.c (sframe_decoder_get_abi_arch): Update return type to
+ uint8_t.
+ (sframe_encoder_get_abi_arch): Likewise.
+ include/
+ * sframe-api.h (sframe_decoder_get_abi_arch): Likewise.
+ (sframe_encoder_get_abi_arch): Likewise.
+
+2023-06-27 Indu Bhagat <indu.bhagat@oracle.com>
+
+ libsframe: bfd: use uint32_t for return type of sframe_calc_fre_type
+ Use uint32_t type alias consistently for all APIs in libsframe.
+
+ bfd/
+ * elfxx-x86.c (_bfd_x86_elf_create_sframe_plt): Adjust for the
+ changed return type.
+ libsframe/
+ * sframe.c (sframe_calc_fre_type): Use uint32_t for return type.
+ include/
+ * sframe-api.h (sframe_calc_fre_type): Likewise.
+
+2023-06-27 Indu Bhagat <indu.bhagat@oracle.com>
+
+ libsframe: use uint32_t for fre_type and fde_type function args
+ The API sframe_fde_create_func_info is provided by libsframe. Current
+ users are the bfd linker. Adjust the argument type for the variables
+ carrying the SFrame FRE type and SFrame FDE type to consistenly use
+ uint32_t type alias.
+
+ include/
+ * sframe-api.h (sframe_fde_create_func_info): Use uint32_t
+ instead of unsigned int.
+ libsframe/
+ * sframe.c (sframe_get_fre_type): Likewise.
+ (sframe_get_fde_type): Likewise.
+ (flip_fre_start_address): Likewise.
+ (sframe_fre_start_addr_size): Likewise.
+ (sframe_fre_entry_size): Likewise.
+ (flip_fre): Likewise.
+ (flip_sframe): Likewise.
+ (sframe_fde_create_func_info): Likewise.
+ (sframe_calc_fre_type): Likewise.
+ (sframe_decode_fre_start_address): Likewise.
+ (sframe_decode_fre): Likewise.
+ (sframe_find_fre): Likewise.
+ (sframe_decoder_get_fre): Likewise.
+ (sframe_encoder_add_fre): Likewise.
+ (sframe_encoder_write_fre_start_addr): Likewise.
+ (sframe_encoder_write_fre): Likewise.
+ (sframe_encoder_write_sframe): Likewise.
+
+2023-06-27 Indu Bhagat <indu.bhagat@oracle.com>
+
+ libsframe: update the semantics of sframe_fre_get_fp_offset
+ Until now, sframe_fre_get_fp_offset () would return
+ SFRAME_ERR_FREOFFSET_NOPRESENT if the ABI uses fixed FP offset. A stack
+ tracer, then, would call an explicit sframe_decoder_get_fixed_fp_offset ()
+ to get the FP offset.
+
+ On second look, it appears to make sense to hide these details of
+ whether the FP offset is fixed or not in an ABI from the consumer. Now,
+ with the changed semantics, the call to sframe_fre_get_fp_offset () will
+ fetch the fixed FP offset if applicable, or get the FP offset from FRE
+ when there is no fixed FP offset.
+
+ This patch changes the behavior of sframe_fre_get_fp_offset (): it turns
+ an error into non-error. This change will be included with the next
+ release of libsframe, where all the exposed symbols will be versioned
+ with version node LIBSFRAME_1.0 for the first time.
+
+ libsframe/
+ * sframe.c (sframe_fre_get_fp_offset): Return the fixed offset, if
+ applicable. Else return the FP offset from the FRE.
+
+2023-06-27 Indu Bhagat <indu.bhagat@oracle.com>
+
+ libsframe: update the semantics of sframe_fre_get_ra_offset
+ Until now, sframe_fre_get_ra_offset () would return
+ SFRAME_ERR_FREOFFSET_NOPRESENT if the ABI uses fixed RA offset (e.g.,
+ AMD64). A stack tracer, then, will call an explicit
+ sframe_decoder_get_fixed_ra_offset () to get the RA offset.
+
+ On second look, it appears to make sense to hide these details of
+ whether the RA offset is fixed or not from the consumer. Now, with the
+ changed semantics, the call to sframe_fre_get_ra_offset () will fetch
+ the fixed RA offset if applicable, or get the RA offset from FRE when
+ there is no fixed RA offset.
+
+ Adjustments need to be made to ensure the textual dump remains the same
+ as preivous. Currently, e.g., if RA is not being tracked per FRE,
+ following is seen with objdump --sframe:
+
+ STARTPC CFA FP RA
+ 000000000000NNNN sp+X u u
+
+ This patch changes the behavior of sframe_fre_get_ra_offset: it turns an
+ error into non-error. This change will be included with the next
+ release of libsframe, where all exposed symbols will be versioned for
+ the first time.
+
+ libsframe/
+ * sframe.c (sframe_fre_get_ra_offset): Return the fixed offset,
+ if applicable. Else return the RA offset from the FRE.
+ * sframe-dump.c (dump_sframe_func_with_fres): Make adjustments
+ to keep the textual dump same as previous.
+
+2023-06-27 Indu Bhagat <indu.bhagat@oracle.com>
+
+ libsframe: add symbol versioning
+ Define an empty base version LIBSFRAME_0.0 and add all symbols to
+ version LIBSFRAME_1.0.
+
+ The previous release of libsframe (libsframe.so.0) did not have
+ versioned symbols. Adding a libsframe.ver file so that future releases
+ of the library (and its consumers) can manage the changes better.
+
+ For Solaris ld, use -M mapfile command line option. libsframe does not
+ restrict the set of exported symbols, so at this time there is no need
+ to fall back on the libtool's -export-symbols option for platforms where
+ some other linker (with a different command line option for symbol
+ versioning) may be used.
+
+ libsframe/
+ * Makefile.am: Use symbol versioning for libsframe.
+ * Makefile.in: Regenerated.
+ * configure: Check for Solaris ld.
+ * configure.ac: Regenerated.
+ * libsframe.ver: New file.
+
+2023-06-27 Indu Bhagat <indu.bhagat@oracle.com>
+
+ libsframe: remove sframe_get_funcdesc_with_addr API
+ This is an incompatible ABI change in libsframe.
+
+ The interface provided by this function is not a healthy abstraction to
+ expose: the return type sframe_func_desc_entry, which is defined in
+ include/sframe.h (the SFrame binary format definition). This ties up
+ the library in a undesirable way. Most importantly, this function
+ should technically not be directly necessary for a stack tracer. A
+ stack tracer will likely only need to do a sframe_find_fre ().
+
+ Rename the API to continue to use the functionality internally in the
+ library. bfd/linker does not use this function.
+
+ Change the return type of the previous definition and make a note about
+ its planned deprecation.
+
+ include/
+ * sframe-api.h: Change return type of sframe_get_funcdesc_with_addr.
+ Add comment for intention to deprecate.
+ libsframe/
+ *sframe.c (sframe_get_funcdesc_with_addr): Change return type
+ and set error code. This API is deprecated.
+ (sframe_get_funcdesc_with_addr_internal): New definition for
+ internal use.
+ (sframe_find_fre): Use sframe_get_funcdesc_with_addr_internal
+ instead.
+
+2023-06-27 Indu Bhagat <indu.bhagat@oracle.com>
+
+ libsframe: add library versioning
+ lisbframe was first released with Bintuils 2.40. As the library
+ evolves, some changes will break the ABI. Add library versioning for
+ users to manage these changes.
+
+ For the next release of the library (libsframe.so.1), incompatible ABI
+ changes are planned. These will include:
+ - Deprecation of some APIs, like sframe_get_funcdesc_with_addr (), and
+ - Change in the contract of some APIs (e.g., return type, behavior).
+
+ In libtool-version, set the current to 1 to prepare for the upcoming
+ release. Reset revision and age to 0.
+
+ Add libtool-version file to EXTRA_DIST.
+
+ libsframe/
+ * Makefile.am: Use libtool versioning.
+ * Makefile.in: Regenerated.
+ * libtool-version: New file.
+
+2023-06-27 Philipp Tomsich <philipp.tomsich@vrull.eu>
+
+ RISC-V: Support Zicond extension
+ This implements the Zicond (conditional integer operations) extension,
+ as of version 1.0-rc2.
+
+ The Zicond extension acts as a building block for branchless sequences
+ including conditional-arithmetic, conditional-logic and
+ conditional-select/move.
+ The following instructions constitute Zicond:
+ - czero.eqz rd, rs1, rs2 => rd = (rs2 == 0) ? 0 : rs1
+ - czero.nez rd, rs1, rs2 => rd = (rs2 != 0) ? 0 : rs1
+
+ See
+ https://github.com/riscv/riscv-zicond/releases/download/v1.0-rc2/riscv-zicond-v1.0-rc2.pdf
+ for the proposed specification and usage details.
+
+ bfd/ChangeLog:
+
+ * elfxx-riscv.c (riscv_multi_subset_supports): Recognize
+ INSN_CLASS_ZICOND.
+ (riscv_multi_subset_supports_ext): Recognize INSN_CLASS_ZICOND.
+
+ gas/ChangeLog:
+
+ * testsuite/gas/riscv/zicond.d: New test.
+ * testsuite/gas/riscv/zicond.s: New test.
+
+ include/ChangeLog:
+
+ * opcode/riscv-opc.h (MATCH_CZERO_EQZ): Define.
+ (MASK_CZERO_EQZ): Define.
+ (MATCH_CZERO_NEZ): Define,
+ (MASK_CZERO_NEZ): Define.
+ (DECLARE_INSN): Add czero.eqz and czero.nez.
+ * opcode/riscv.h (enum riscv_insn_class): Add
+ INSN_CLASS_ZICOND.
+
+ opcodes/ChangeLog:
+
+ * riscv-opc.c: Add czero.eqz and czero.nez.
+
+ Signed-off-by: Philipp Tomsich <philipp.tomsich@vrull.eu>
+
+2023-06-27 Nick Clifton <nickc@redhat.com>
+
+ Add note about adding ChangeLog.git to src-release.sh
+
+2023-06-27 Cui, Lili <lili.cui@intel.com>
+
+ gprofng: Update intel url
+ Since the old software.intel.com has been removed, update a new one.
+
+ gprofng/ChangeLog
+ 2023-06-27 Lili Cui <lili.cui@intel.com>
+
+ * gp-display-html/gp-display-html.in: Update intel url.
+
+2023-06-27 GDB Administrator <gdbadmin@sourceware.org>
+
+ Automatic date update in version.in
+
+2023-06-26 Nick Clifton <nickc@redhat.com>
+
+ Fix gas tests for aarch64-pe
+
+ Synchromize libiberty sources with master version in gcc repository
+
+ Sync config.guess and config.sub with upstream master versions.
+
+ Updated French translation for the gprof sub-directory
+
+2023-06-26 GDB Administrator <gdbadmin@sourceware.org>
+
+ Automatic date update in version.in
+
+2023-06-25 Feiyang Chen <chenfeiyang@loongson.cn>
+
+ LoongArch: Support referring to FCSRs as $fcsrX
+ Previously, FCSRs were referred to as $rX, which seemed strange.
+ We refer to FCSRs as $fcsrX, which ensures compatibility with LLVM
+ IAS as well.
+
+ gas/ChangeLog:
+
+ * config/tc-loongarch.c:
+ (loongarch_fc_normal_name): New definition.
+ (loongarch_fc_numeric_name): New definition.
+ (loongarch_single_float_opcodes): Modify `movgr2fcsr` and
+ `movfcsr2gr`.
+ testsuite/gas/loongarch/float_op.d: Likewise.
+ testsuite/gas/loongarch/float_op.s: Likewise.
+
+ include/ChangeLog:
+
+ * opcode/loongarch.h:
+ (loongarch_fc_normal_name): New extern.
+ (loongarch_fc_numeric_name): New extern.
+
+ opcodes/ChangeLog:
+
+ * opcodes/loongarch-dis.c (loongarch_after_parse_args): Support
+ referring to FCSRs as $fcsrX.
+ * opcodes/loongarch-opc.c (loongarch_args_parser_can_match_arg_helper):
+ Likewise.
+
+2023-06-25 GDB Administrator <gdbadmin@sourceware.org>
+
+ Automatic date update in version.in
+
+2023-06-24 GDB Administrator <gdbadmin@sourceware.org>
+
+ Automatic date update in version.in
+
+2023-06-23 Thiago Jung Bauermann <thiago.bauermann@linaro.org>
+
+ gdb/testsuite: Avoid infinite loop in gdb.reverse/step-reverse.exp
+ This testcase sometimes gets stuck in a loop for hours when running in our
+ CI. The problem is that due to an issue unrelated to reverse debugging the
+ inferior exits early, and because of the overly generic ".*" pattern the
+ testcase keeps sending the "next" command without noticing that the
+ inferior is gone.
+
+ gdb_test_multiple has a pattern to detect that "The program is not being
+ run.", but since it is placed after the patterns from the caller it won't
+ be triggered. It also has a timeout pattern but because it is triggered
+ between successful matches, each time the test matches the '-re -wrap ".*"'
+ this counts as a successful match and the timeout is reset.
+
+ Since the test binary is compiled with debug information, fix by changing
+ one of the generic patterns to match entering the main function and the
+ other one to match the source code line number that is shown by GDB right
+ after the "step" command.
+
+ Also, as a precaution add a maximum number of times the "next" command will
+ be sent.
+
+ Co-Authored-By: Tom de Vries <tdevries@suse.de>
+ Reviewed-By: Bruno Larsen <blarsen@redhat.com>
+ Approved-By: Tom de Vries <tdevries@suse.de>
+
+2023-06-23 Alan Modra <amodra@gmail.com>
+
+ [GOLD] PowerPC64 huge branch dynamic relocs
+ PowerPC64 gold and ld.bfd implement an indirect branch trampoline,
+ used when the destination of a branch exceeds a bounce through another
+ "b" instruction. When generating PIEs or shared libraries, the
+ addresses need dynamic relocations. This was implemented in gold
+ using a dedicated relocation section, but this means the relative
+ relocations for these addresses are not sorted properly with other
+ dynamic relative relocations: gold doesn't support merging relocation
+ sections, then sorting. Instead we need to use a single .rela.dyn
+ section.
+
+ This is done by increasing the size of rela_dyn_ during do_relax to
+ account for needed dynamic relocations, delaying adding the actual
+ relocations until the end of relaxation once the layout has
+ stabilised.
+
+ * powerpc.cc (Target_powerpc): Add rela_dyn_size_;
+ (update_current_size): New function.
+ (Target_powerpc::do_relax): Capture the size of rela_dyn_ at
+ the start of relaxation. Artifically increase its size during
+ relaxation to account for needed indirect branches, and add
+ those relocations at the end.
+ (Output_data_brlt_powerpc::rel_, reset_brlt_sizes),
+ (finalize_brlt_sizes, add_reloc, set_current_size): Delete.
+ (Target_powerpc::make_brlt_section): Don't make reloc section.
+
+2023-06-23 Alan Modra <amodra@gmail.com>
+
+ [GOLD] Support setting DT_RELACOUNT late
+ PowerPC gold adds relative dynamic relocs in do_relax. These aren't
+ accounted for in the value set in add_target_dynamic_tags, which is
+ called before do_relax. Provide a way of setting DT_RELCOUNT and
+ DT_RELACOUNT at the point where .dynamic is written.
+
+ * layout.cc (Layout::add_target_dynamic_tags): Add custom_relcount
+ parameter. Emit DT_RELCOUNT/RELACOUNT as a custom target handled
+ dynamic tag if set.
+ * layout.h(Layout::add_target_dynamic_tags): Update prototype.
+ * aarch64.cc (Target_aarch64::do_finalize_sections): Adjust
+ add_target_dynamic_tags call.
+ * arm.cc (Target_arm::do_finalize_sections): Likewise.
+ * i386.cc (Target_i386::do_finalize_sections): Likewise.
+ * mips.cc (Target_mips::do_finalize_sections): Likewise.
+ * s390.cc (Target_s390::do_finalize_sections): Likewise.
+ * sparc.cc (Target_sparc::do_finalize_sections): Likewise.
+ * tilegx.cc (Target_tilegx::do_finalize_sections): Likewise.
+ * x86_64.cc (Target_x86_64::do_finalize_sections): Likewise.
+ * powerpc.cc (Target_powerpc::do_finalize_sections): Likewise.
+ (Target_powerpc::do_dynamic_tag_custom_value): New function.
+
+2023-06-23 Alan Modra <amodra@gmail.com>
+
+ [GOLD] powerpc DT_RELACOUNT
+ DT_RELACOUNT was calculated incorrectly, and relative relocs not
+ sorted as they should be to the start of .rela.dyn, due to adding one
+ particular class of dynamic reloc using the wrong "add" method.
+
+ * powerpc.cc (Target_powerpc::Scan::global): Add relative
+ dyn relocs for ADDR64 and similar using add_global_relative.
+
+2023-06-23 Alan Modra <amodra@gmail.com>
+
+ lto test fails with -fno-inline in CFLAGS
+ Putting -fno-inline in CFLAGS results in these failures.
+ FAIL: Build liblto-17b.so 1
+ FAIL: PR ld/12365
+ FAIL: PR ld/13183
+
+ * ld-plugin/lto.exp: Add -finline to compiler flags in some tests.
+
+2023-06-23 Tom Tromey <tom@tromey.com>
+
+ Fix off-by-one error
+ Simon pointed out that commit a2bbca9fa5e ("Use std::vector<bool> for
+ agent_expr::reg_mask") caused a regression in libstdc++ debug mode.
+ This was due to an off-by-one error in a vector resize. This patch
+ fixes the problem.
+
+2023-06-23 GDB Administrator <gdbadmin@sourceware.org>
+
+ Automatic date update in version.in
+
+2023-06-22 Ilya Leoshkevich <iii@linux.ibm.com>
+
+ gdb/testsuite: fix gdb.python/py-unwind.exp with python >= 3.11
+ Python 3.11 changed the AttributeError message - see commit
+ 0cb765b2cec9 ("bpo-46730: Add more info to @property AttributeError
+ messages (GH-31311)"). Add the new message to the expectations.
+
+ Approved-By: Tom Tromey <tom@tromey.com>
+ Link: https://sourceware.org/pipermail/gdb-patches/2023-June/200433.html
+
+2023-06-22 H.J. Lu <hjl.tools@gmail.com>
+
+ Revert "x86: Don't check if AVX512 template requires AVX512VL"
+ This reverts commit c7face14225296a2f5d3ebeb8ace88c166d80c3e.
+
+2023-06-22 Tom de Vries <tdevries@suse.de>
+
+ [gdb/testsuite] Clean or check standard_output_file dir in gdb_init
+ In commit e2adba909e7 ("[gdb/testsuite] Clean up before compilation in
+ gdb.ada/call-no-debug.exp") I added some code in the test-case to remove some
+ files at the start of the test-case:
+ ...
+ remote_file host delete [standard_output_file prog.o]
+ remote_file host delete [standard_output_file prog.ali]
+ ...
+
+ Then in commit b7b77500dc5 ("[gdb/testsuite] Clean standard_output_file dir in
+ gdb_init") I tried to do this more structurally, by cleaning up the entire
+ standard_output_file directory, for all test-cases.
+
+ This caused a regression when using "make check -j 2", due to the cleanup
+ removing the active gdb.log, so I reverted the commit.
+
+ Try again, this time handling the two cases separately.
+
+ If the standard_output_file directory contains an active gdb.log, check that
+ the directory contains no files other than gdb.log and gdb.sum. This puts
+ the reponsibility for the cleanup at the callers in gdb/testsuite/Makefile.in
+ which use --outdir.
+
+ If the standard_output_file directory doesn't contain an active gdb.log, clean
+ it by removing the entire directory.
+
+ An exception is made for performance tests, where cleaning up the
+ standard_output_file dir is the wrong thing to do, because an invocation with
+ GDB_PERFTEST_MODE == run is intended to reuse binaries left there by an
+ earlier invocation with GDB_PERFTEST_MODE == compile.
+
+ Tested on x86_64-linux.
+
+ Suggested-By: Tom Tromey <tom@tromey.com>
+ Reviewed-By: Tom Tromey <tom@tromey.com>
+ Tested-By: Luis Machado <luis.machado@arm.com>
+
+2023-06-22 Tom Tromey <tromey@adacore.com>
+
+ Implement DAP "hover" context
+ A DAP client can request that an expression be evaluated in "hover"
+ context, meaning that it should not cause side effects. In gdb, this
+ can be implemented by temporarily setting a few "may-" parameters to
+ "off".
+
+ In order to make this work, I had to also change "may-write-registers"
+ so that it can be changed while the program is running. I don't think
+ there was any reason for this prohibition in the first place.
+
+ Bug: https://sourceware.org/bugzilla/show_bug.cgi?id=30476
+
+2023-06-22 Tom Tromey <tromey@adacore.com>
+
+ Implement DAP logging breakpoints
+ DAP allows a source breakpoint to specify a log message. When this is
+ done, the breakpoint acts more like gdb's dprintf: it logs a message
+ but does not cause a stop.
+
+ I looked into implement this using dprintf with the new %V printf
+ format. However, my initial attempt at this did not work, because
+ when the inferior is continued, the dprintf output is captured by the
+ gdb.execute call. Maybe this could be fixed by having all
+ inferior-continuation commands use the "&" form; the main benefit of
+ this would be that expressions are only parsed a single time.
+
+2023-06-22 Tom Tromey <tromey@adacore.com>
+
+ Handle supportsVariablePaging in DAP
+ A bug report about the supportsVariablePaging capability in DAP
+ resulted in a clarification: when this capability is not present, DAP
+ implementations should ignore the paging parameters to the "variables"
+ request. This patch implements this clarification.
+
+ Implement type checking for DAP breakpoint requests
+ I realized that with a small refactoring, it is possible to type-check
+ the parameters to the various DAP breakpoint requests. This would
+ have caught the earlier bug involving hitCondition.
+
+ Handle exceptions when creating DAP breakpoints
+ When creating a DAP breakpoint, a failure should be returned by
+ setting "verified" to False. gdb didn't properly implement this, and
+ there was a FIXME comment to this effect. This patch fixes the
+ problem.
+
+ Reuse breakpoints more frequently in DAP
+ The DAP breakpoint code tries to reuse a breakpoint when possible.
+ Currently it uses the condition and the hit condition (aka ignore
+ count) when making this determination. However, these attributes are
+ just going to be reset anyway, so this patch changes the code to
+ exclude these from the reuse decision.
+
+ Fix type of DAP hitCondition
+ DAP specifies a breakpoint's hitCondition as a string, meaning it is
+ an expression to be evaluated. However, gdb implemented this as if it
+ were an integer instead. This patch fixes this oversight.
+
+2023-06-22 Simon Farre <simon.farre.cx@gmail.com>
+
+ gdb/DAP Few bug fixes & Evaluate Array Watch vars
+ v2.
+
+ EvaluateResult does not need a name, just as what Tom pointed out in
+ previous review. It's only the *children* that need to be made sure that
+ their names are valid. An identifier for a variable, can't ever have an
+ integer as a name, anyhow (not as far as I am aware, no programming
+ languages allow for that).
+
+ Removed the f-strings and use str() instead as pointed out that
+ f-strings might not be supported fully.
+
+ v1.
+
+ This patch fixes a few bugs.
+
+ First of all, name of VariableReferences must always be of string type.
+ This patch makes sure that this is the case by formatting the name. If
+ (when) the name is an integer, this will cause clients to fail or throw
+ errors.
+
+ Fixes a bug in NoOpArrayPrinter that calculated children to be N, but
+ only ever retrieves N-1 children, which makes Python at some time later
+ (during fetch_children -> fetch_one_child(N) ) raise an exception (out
+ of list index) which makes the entire request go bad.
+
+ The result[self.result_name] also f-strings the printer.to_string()
+ value, because this can potentially be a LazyString (which is a Python
+ object, not a string) and is not serializable by json.dumps.
+
+ Approved-By: Tom Tromey <tom@tromey.com>
+
+2023-06-22 GDB Administrator <gdbadmin@sourceware.org>
+
+ Automatic date update in version.in
+
+2023-06-21 H.J. Lu <hjl.tools@gmail.com>
+
+ x86: Free the symbol buffer and the relocation buffer after use
+ When --no-keep-memory is used, the symbol buffer and the relocation
+ buffer aren't cached. When packing relative relocations, we may
+ allocate a new symbol buffer and a new relocation buffer for each
+ eligible section in an object file. If there are many sections,
+ memory may be exhausted. In this case, we should free the symbol
+ buffer and the relocation buffer after use. If symbol buffer entries
+ are used to track relative relocations against local symbols for later
+ use, the symbol buffer should be cached.
+
+ PR ld/30566
+ * elfxx-x86.c (elf_x86_relative_reloc_record_add): Add an
+ argument to inform caller if the symbol buffer should be kept.
+ (_bfd_x86_elf_link_relax_section): Call
+ _bfd_elf_link_info_read_relocs instead of
+ _bfd_elf_link_read_relocs. Free the symbol buffer and the
+ relocation buffer after use. Cache the symbol buffer if it
+ is used.
+
+2023-06-21 Tom Tromey <tromey@adacore.com>
+
+ Add missing backslash to update-gnulib.sh
+ A user on irc noticed a missing backslash on one line in
+ update-gnulib.sh. This patch adds it.
+
+ Re-running update-gnulib.sh causes a few copyright notices to change.
+ Presumably these are from upstream gnulib and shouldn't be touched by
+ our yearly update. I've updated the script to account for this, but I
+ did not want to try testing it...
+
+2023-06-21 Tom de Vries <tdevries@suse.de>
+
+ [gdb/testsuite] Add have_host_locale
+ With test-case gdb.tui/pr30056.exp, I run into:
+ ...
+ sh: warning: setlocale: LC_ALL: cannot change locale (C.UTF-8)^M
+ ...
+ and then subsequently into:
+ ...
+ WARNING: timeout in accept_gdb_output
+ FAIL: gdb.tui/pr30056.exp: Control-C
+ ...
+
+ This is on a CentOS 7 distro for powerpc64le.
+
+ Either it has no C.UTF-8 support, or it's not installed:
+ ...
+ $ locale -a | grep ^C
+ C
+ $
+ ...
+
+ Fix this by:
+ - adding a new proc have_host_locale, and
+ - using it in all test-cases using setenv LC_ALL.
+
+ Tested on powerpc64le-linux and x86_64-linux.
+
+2023-06-21 Tom de Vries <tdevries@suse.de>
+
+ [gdb/testsuite] Fix gdb.tui/wrap-line.exp
+ PR testsuite/30458 reports the following FAIL:
+ ...
+ PASS: gdb.tui/wrap-line.exp: width-auto-detected: cli: wrap
+ ^CQuit
+ (gdb) WARNING: timeout in accept_gdb_output
+ Screen Dump (size 50 columns x 24 rows, cursor at column 6, row 3):
+ 0 Quit
+ 1 (gdb) 7890123456789012345678901234567890123456789
+ 2 W^CQuit
+ 3 (gdb)
+ ...
+ FAIL: gdb.tui/wrap-line.exp: width-auto-detected: cli: prompt after wrap
+ ...
+
+ The problem is that the regexp doesn't account for the ^C:
+ ...
+ gdb_assert { [Term::wait_for "^WQuit"] } "prompt after wrap"
+ ...
+
+ The ^C occurs occasionally. This is something we'd like to fix. It's
+ reported as a readline problem here (
+ https://lists.gnu.org/archive/html/bug-readline/2023-06/msg00000.html ).
+
+ For now, fix this by updating the regexp, and likewise in another place in the
+ test-case where we use ^C.
+
+ Tested on x86_64-linux.
+
+ Bug: https://sourceware.org/bugzilla/show_bug.cgi?id=30458
+
+2023-06-21 Alan Modra <amodra@gmail.com>
+
+ PR30536, ppc64el gold linker produces unusable clang-16 binary
+ In commit 0961e631575b, the fix for PR30217, make_lplt_section and
+ make_brlt_section were changed to use rela_dyn_ rather than their own
+ separate dynamic reloc sections. This fails miserably whenever brlt_
+ is needed for long branches, due to needing to iterate sizing and thus
+ reset brlt_ sizes.
+
+ PR 30536
+ PR 30217
+ * powerpc.cc (Target_powerpc::make_brlt_section): Don't use
+ rela_dyn_.
+
+2023-06-21 Tom de Vries <tdevries@suse.de>
+
+ [gdb/testsuite] Reimplement Term::command_no_prompt_prefix
+ Say we run test-case gdb.tui/basic.exp. It calls Term::enter_tui, which does:
+ ...
+ command_no_prompt_prefix "tui enable"
+ ...
+
+ The proc command_no_prompt_prefix is documented as:
+ ...
+ # As proc command, but don't wait for an initial prompt. This is used for
+ # initial terminal commands, where there's no prompt yet.
+ ...
+
+ Indeed, before the "tui enable" command, the tuiterm is empty, so there is no
+ prompt and just before switching to TUI we have in the tuiterm:
+ ...
+ tui enable
+ ...
+
+ The reason that there is no prompt, is that:
+ - in order for tuiterm to show something, its input processing procs need to
+ be called, and
+ - the initial gdb prompt, and subsequent prompts generated by gdb_test-style
+ procs, are all consumed by those procs instead.
+
+ This is in principle not a problem, but the absence of a prompt makes a
+ tuiterm session look less like a session on an actual xterm.
+
+ Add a new proc gen_prompt, that:
+ - generates a prompt using echo
+ - consumes the response before the prompt using gdb_expect
+ - consumes the prompt using Term::wait_for "".
+
+ This allows us to reimplement Term::command_no_prompt_prefix using
+ Term::command, and just before switching to TUI we have in the tuiterm:
+ ...
+ (gdb) tui enable
+ ...
+
+ Tested on x86_64-linux.
+
+2023-06-21 Tom de Vries <tdevries@suse.de>
+
+ [gdb/testsuite] Make Term::wait_for "" match only a prompt
+ The semantics of Term::wait_for is:
+ ...
+ # Accept some output from gdb and update the screen. WAIT_FOR is
+ # a regexp matching the line to wait for. Return 0 on timeout, 1
+ # on success.
+ proc wait_for {wait_for} {
+ ...
+
+ Note that besides the regexp, also a subsequent gdb prompt is matched.
+
+ I recently used wait_for "" in a few test-cases, thinking that this would
+ match just a prompt, but in fact that's not the case.
+
+ Fix this in wait_for, and add a corresponding test in gdb.tui/tuiterm-2.exp.
+
+ Tested on x86_64-linux.
+
+2023-06-21 Nick Clifton <nickc@redhat.com>
+
+ Prune linker warnings about an executable stack being created with the -z execstack option.
+ * testsuite/lib/binutils-common.exp (prune_warnings_extra): Prune warnings about -z execstack creating an executable stack.
+
+ For test for PR 29072 when the linker is configured with --enable-default-execstack=no.
+ PR 29072
+ * testsuite/ld-elf/elf.exp (target_defaults_to_execstack): Always return false for linkers configured with the --enable-default-execstack=no option.
+
+2023-06-21 Tankut Baris Aktemur <tankut.baris.aktemur@intel.com>
+
+ gdbserver: use target_waitstatus::to_string in 'prepare_resume_reply'
+ Use the to_string method of target_waitstatus in
+ 'prepare_resume_reply' for a more readable log message.
+
+ Approved-By: Tom Tromey <tom@tromey.com>
+
+2023-06-21 Jan Beulich <jbeulich@suse.com>
+
+ x86: fix expansion of %XV
+ Only %LV should continue on to S handling; avoid emitting a stray 'l'
+ (typically) in suffix-always mode.
+
+2023-06-21 Alan Modra <amodra@gmail.com>
+
+ elf32_arm_get_synthetic_symtab memory leak
+ ARM get_synthetic_symtab reads .plt and caches that data. Caching the
+ data doesn't make a lot of sense since get_synthetic_symtab is only
+ called once per bfd, and the memory might be put to better use. It
+ also leaks on closing the bfd.
+
+ * elf32-arm.c (elf32_arm_get_synthetic_symtab): Don't cache
+ plt contents. Free plt data before returning.
+
+2023-06-21 Alan Modra <amodra@gmail.com>
+
+ macho-o.c don't leak strtab
+ * mach-o.c (bfd_mach_o_write_symtab_content): Free strtab on
+ success path.
+
+2023-06-21 GDB Administrator <gdbadmin@sourceware.org>
+
+ Automatic date update in version.in
+
+2023-06-20 Tom Tromey <tom@tromey.com>
+
+ Use ARRAY_SIZE in ax-general.c
+ This changes a couple of spots in ax-general.c to use ARRAY_SIZE.
+ While making this change, I noticed that one of the bounds checks was
+ incorrect.
+
+ Reviewed-by: John Baldwin <jhb@FreeBSD.org>
+
+2023-06-20 Tom Tromey <tom@tromey.com>
+
+ Remove aop_last
+ aop_last is only used for an assertion. However, due to the '.def'
+ construct in the sources, this assert could never plausibly trigger
+ (the assert predates the use of a .def file here). This patch removes
+ the constant and the assert.
+
+ Reviewed-by: John Baldwin <jhb@FreeBSD.org>
+
+2023-06-20 Tom Tromey <tom@tromey.com>
+
+ Make aop_map 'static'
+ This changes aop_map to be 'static'.
+
+ Reviewed-by: John Baldwin <jhb@FreeBSD.org>
+
+2023-06-20 Tom Tromey <tom@tromey.com>
+
+ Use bool for agent_expr::tracing
+ This changese agent_expr::tracing to have type bool, allowing inline
+ initialization and cleaning up the code a little.
+
+ Reviewed-by: John Baldwin <jhb@FreeBSD.org>
+
+2023-06-20 Tom Tromey <tom@tromey.com>
+
+ Simplify agent_expr constructor
+ This simplifies the agent_expr constructor a bit, and removes the
+ destructor entirely.
+
+ Reviewed-by: John Baldwin <jhb@FreeBSD.org>
+
+2023-06-20 Tom Tromey <tom@tromey.com>
+
+ Use std::vector<bool> for agent_expr::reg_mask
+ agent_expr::reg_mask implements its own packed boolean vector. This
+ patch replaces it with a std::vector<bool>, simplifying the code.
+
+ Reviewed-by: John Baldwin <jhb@FreeBSD.org>
+
+2023-06-20 Tom Tromey <tom@tromey.com>
+
+ Use gdb::byte_vector in agent_expr
+ This changes agent_expr to use gdb::byte_vector rather than manually
+ reimplementing a vector.
+
+ Reviewed-by: John Baldwin <jhb@FreeBSD.org>
+
+2023-06-20 Tom Tromey <tom@tromey.com>
+
+ Remove mem2hex
+ tracepoint.c has a 'mem2hex' function that is functionally equivalent
+ to bin2hex. This patch removes the redundancy.
+
+ Reviewed-by: John Baldwin <jhb@FreeBSD.org>
+
+2023-06-20 H.J. Lu <hjl.tools@gmail.com>
+
+ x86: Don't check if AVX512 template requires AVX512VL
+ If the ZMM operand in an AVX12 template also allows XMM or ZMM, this
+ template must require AVX512VL. Drop the AVX512VL requirement check
+ on such AVX512 templates.
+
+ * config/tc-i386.c (check_VecOperands): Don't check if AVX512
+ template requires AVX512VL.
+
+2023-06-20 Tom Tromey <tom@tromey.com>
+
+ Use std::string in do_set_command
+ do_set_command manually updates a string, only to copy it to a
+ std::string and free the working copy. This patch changes this code
+ to use std::string for everything, simplifying the code and removing a
+ copy.
+
+ Reviewed-by: John Baldwin <jhb@FreeBSD.org>
+
+2023-06-20 Tom Tromey <tom@tromey.com>
+
+ Use byte_vector in remote.c:readahead_cache
+ This patch changes the remote.c readahead_cache to use
+ gdb::byte_vector. This simplifies the code by removing manual memory
+ management.
+
+ Reviewed-by: John Baldwin <jhb@FreeBSD.org>
+
+2023-06-20 Tom Tromey <tom@tromey.com>
+
+ Use std::string in linux-osdata.c
+ I found some code in linux-osdata that manually managed a string.
+ Replacing this with std::string simplifies it.
+
+ Reviewed-by: John Baldwin <jhb@FreeBSD.org>
+
+2023-06-20 Tom Tromey <tromey@adacore.com>
+
+ Use unique_xmalloc_ptr for mi_parse::command
+ This changes mi_parse::command to be a unique_xmalloc_ptr and fixes up
+ all the uses. This avoids some manual memory management. std::string
+ is not used here due to how the Python API works -- this approach
+ avoids an extra copy there.
+
+ Reviewed-by: Keith Seitz <keiths@redhat.com>
+
+2023-06-20 Tom Tromey <tromey@adacore.com>
+
+ Use std::string for MI token
+ This changes the MI "token" to be a std::string, removing some manual
+ memory management. It also makes current_token 'const' in order to
+ support this change.
+
+ Reviewed-by: Keith Seitz <keiths@redhat.com>
+
+2023-06-20 Alan Modra <amodra@gmail.com>
+
+ Don't segfault in mips reloc special_functions
+ A symbol defined in a section from a shared library will have a NULL
+ section->output_section during linking.
+
+ * elf32-mips.c (gprel32_with_gp): Don't segfault on NULL
+ symbol->section->output_section.
+ * elf64-mips.c (mips_elf64_gprel32_reloc): Likewise.
+ * elfn32-mips.c (mips_elf_gprel16_reloc): Likewise.
+ (mips_elf_literal_reloc, mips_elf_gprel32_reloc): Likewise.
+ (gprel32_with_gp, mips16_gprel_reloc): Likewise.
+ * elfxx-mips.c (_bfd_mips_elf_gprel16_with_gp): Likewise.
+ (_bfd_mips_elf_generic_reloc): Likewise.
+
+2023-06-20 GDB Administrator <gdbadmin@sourceware.org>
+
+ Automatic date update in version.in
+
+2023-06-19 Tom de Vries <tdevries@suse.de>
+
+ Revert "[gdb/testsuite] Clean standard_output_file dir in gdb_init"
+ This reverts commit b7b77500dc56e5bc21473dd4f3dde2543d894557.
+
+2023-06-19 Simon Farre <simon.farre.cx@gmail.com>
+
+ Fixes 28ab59607ef40b9571c0702ffba8f6aa6fb1b033
+ Python formatting errors fixed, introduced by this commit.
+
+ Fixes f1a614dc8f015743e9fe7fe5f3f019303f8db718
+ Fixes failure reported by buildbot regarding ill-formatted Python code.
+
+2023-06-19 Simon Farre <simon.farre.cx@gmail.com>
+
+ gdb/Python: Added ThreadExitedEvent
+ v6:
+ Fix comments.
+ Fix copyright
+ Remove unnecessary test suite stuff. save_var had to stay, as it mutates
+ some test suite state that otherwise fails.
+
+ v5:
+ Did what Tom Tromey requested in v4; which can be found here: https://pi.simark.ca/gdb-patches/87pmjm0xar.fsf@tromey.com/
+
+ v4:
+ Doc formatting fixed.
+
+ v3:
+ Eli:
+ Updated docs & NEWS to reflect new changes. Added
+ a reference from the .ptid attribute of the ThreadExitedEvent
+ to the ptid attribute of InferiorThread. To do this,
+ I've added an anchor to that attribute.
+
+ Tom:
+ Tom requested that I should probably just emit the thread object;
+ I ran into two issues for this, which I could not resolve in this patch;
+
+ 1 - The Thread Object (the python type) checks it's own validity
+ by doing a comparison of it's `thread_info* thread` to nullptr. This
+ means that any access of it's attributes may (probably, since we are
+ in "async" land) throw Python exceptions because the thread has been
+ removed from the thread object. Therefore I've decided in v3 of this
+ patch to just emit most of the same fields that gdb.InferiorThread has, namely
+ global_num, name, num and ptid (the 3-attribute tuple provided by
+ gdb.InferiorThread.ptid).
+
+ 2 - A python user can hold a global reference to an exiting thread. Thus
+ in order to have a ThreadExit event that can provide attribute access
+ reliably (both as a global reference, but also inside the thread exit
+ handler, as we can never guarantee that it's executed _before_ the
+ thread_info pointer is removed from the gdbpy thread object),
+ the `thread_info *` thread pointer must not be null. However, this
+ comes at the cost of gdb.InferiorThread believing it is "valid" - which means,
+ that if a user holds takes a global reference to that
+ exiting event thread object, they can some time later do `t.switch()` at which
+ point GDB will 'explode' so to speak.
+
+ v2:
+ Fixed white space issues and NULL/nullptr stuff,
+ as requested by Tom Tromey.
+
+ v1:
+ Currently no event is emitted for a thread exit.
+
+ This adds this functionality by emitting a new gdb.ThreadExitedEvent.
+
+ It currently provides four attributes:
+ - global_num: The GDB assigned global thread number
+ - num: the per-inferior thread number
+ - name: name of the thread or none if not set
+ - ptid: the PTID of the thread, a 3-attribute tuple, identical to
+ InferiorThread.ptid attribute
+
+ Added info to docs & the NEWS file as well.
+
+ Added test to test suite.
+
+ Fixed formatting.
+
+ Feedback wanted and appreciated.
+
+2023-06-19 Simon Farre <simon.farre.cx@gmail.com>
+
+ gdb/dap - Getting thread names
+ Renamed thread_name according to convention (_ first)
+
+ When testing firefox tests, it is apparent that
+ _get_threads returns threads with name field = None.
+
+ I had initially thought that this was due to Firefox setting the names
+ using /proc/pid/task/tid/comm, by writing directly to the proc fs the
+ names, but apparently GDB seems to catch this, because I re-wrote
+ the basic-dap.exp/c to do this specifically and it saw the changes.
+
+ So I couldn't determine right now, what operation of name change that
+ GDB does not pick up, but with this patch, GDB will pick up the thread
+ names for an applications that set the name of a thread in ways that
+ aren't obvious.
+
+2023-06-19 Nick Clifton <nickc@redhat.com>
+
+ Fix illegal memory access implementing relocs in a fuzzed x86_64 object file.
+ PR 30560
+ * elf64-x86-64.c (elf_x86_64_relocate_section): Add more checks for a valid relocation offset.
+
+2023-06-19 Tom de Vries <tdevries@suse.de>
+
+ [gdb/testsuite] Add shared_gnat_runtime_has_debug_info
+ Test-case gdb.ada/catch_ex_std.exp passes for me with package
+ libada7-debuginfo installed, but after removing it I get:
+ ...
+ (gdb) catch exception some_kind_of_error^M
+ Your Ada runtime appears to be missing some debugging information.^M
+ Cannot insert Ada exception catchpoint in this configuration.^M
+ (gdb) FAIL: gdb.ada/catch_ex_std.exp: catch exception some_kind_of_error
+ ...
+
+ The test-case contains a require gnat_runtime_has_debug_info to deal with
+ this, but the problem is that this checks the static gnat runtime, while this
+ test-case uses the shared one.
+
+ Fix this by introducing shared_gnat_runtime_has_debug_info, and requiring that
+ one instead.
+
+ Tested on x86_64-linux.
+
+ PR testsuite/30094
+ Bug: https://sourceware.org/bugzilla/show_bug.cgi?id=30094
+
+2023-06-19 Tom de Vries <tdevries@suse.de>
+
+ [gdb/tui] Simplify tui_update_variables
+ Simplify tui_update_variables by using template function
+ assign_return_if_changed.
+
+ Tested on x86_64-linux.
+
+2023-06-19 Tom de Vries <tdevries@suse.de>
+
+ [gdb] Add template functions assign_return/set_if_changed
+ Add template functions assign_return_if_changed and assign_set_if_changed in
+ gdb/utils.h:
+ ...
+ template<typename T> void assign_set_if_changed (T &lval, const T &val, bool &changed)
+ { ... }
+ template<typename T> bool assign_return_if_changed (T &lval, const T &val)
+ { ... }
+ ...
+
+ This allows us to rewrite code like this:
+ ...
+ if (tui_border_attrs != entry->value)
+ {
+ tui_border_attrs = entry->value;
+ need_redraw = true;
+ }
+ ...
+ into this:
+ ...
+ need_redraw |= assign_return_if_changed<int> (tui_border_attrs, entry->value);
+ ...
+ or:
+ ...
+ assign_set_if_changed<int> (tui_border_attrs, entry->value, need_redraw);
+ ...
+
+ The names are a composition of the functionality. The functions:
+ - assign VAL to LVAL, and either
+ - return true if the assignment changed LVAL, or
+ - set CHANGED to true if the assignment changed LVAL.
+
+ Tested on x86_64-linux.
+
+2023-06-19 Andreas Schwab <schwab@suse.de>
+
+ riscv: Use run-time endianess for floating point literals
+ gas/
+ PR binutils/30551
+ * config/tc-riscv.c (md_atof): Use target_big_endian instead of
+ TARGET_BYTES_BIG_ENDIAN.
+ * testsuite/gas/riscv/float-be.d: New file.
+ * testsuite/gas/riscv/float-le.d: New file.
+ * testsuite/gas/riscv/float.s: New file.
+
+2023-06-19 GDB Administrator <gdbadmin@sourceware.org>
+
+ Automatic date update in version.in
+
+2023-06-18 Tom de Vries <tdevries@suse.de>
+
+ [gdb/testsuite] Clean standard_output_file dir in gdb_init
+ In commit e2adba909e7 ("[gdb/testsuite] Clean up before compilation in
+ gdb.ada/call-no-debug.exp") I added some code in the test-case to remove some
+ files at the start of the test-case:
+ ...
+ remote_file host delete [standard_output_file prog.o]
+ remote_file host delete [standard_output_file prog.ali]
+ ...
+
+ Replace this with cleaning up the entire directory instead, for all
+ test-cases.
+
+ Tested on x86_64-linux.
+
+ Suggested-By: Tom Tromey <tom@tromey.com>
+ Reviewed-By: Tom Tromey <tom@tromey.com>
+
+2023-06-18 GDB Administrator <gdbadmin@sourceware.org>
+
+ Automatic date update in version.in
+
+2023-06-17 Tom de Vries <tdevries@suse.de>
+
+ [gdb/testsuite] Remove f-string in gdb.python/py-unwind.py
+ on openSUSE Leap 42.3, with python 3.4, I run into a
+ "SyntaxError: invalid syntax" due to usage of an f-string in test-case
+ gdb.python/py-unwind.py.
+
+ Fix this by using string concatenation using '+' instead.
+
+ Tested on x86_64-linux.
+
+2023-06-17 Tom de Vries <tdevries@suse.de>
+
+ [gdb/testsuite] Add nopie in a few test-cases
+ When running test-case gdb.arch/i386-disp-step.exp with target board
+ unix/-m32/-fPIE/-pie we run into:
+ ...
+ gdb compile failed, ld: i386-disp-step0.o: warning: relocation in read-only section `.text'
+ ld: warning: creating DT_TEXTREL in a PIE
+ ...
+
+ Fix this by adding nopie in the compilation flags.
+
+ Likewise in a few other test-cases.
+
+ Tested on x86_64-linux.
+
+2023-06-17 Tom de Vries <tdevries@suse.de>
+
+ [gdb/testsuite] Use require in gdb.dwarf2/implptr.exp
+ In test-case gdb.dwarf2/implptr.exp I noticed:
+ ...
+ } elseif {![is_x86_like_target]} {
+ # This test can only be run on x86 targets.
+ unsupported "needs x86-like target"
+ return 0
+ }
+ ...
+
+ Use instead "require is_x86_like_target".
+
+ Tested on x86_64-linux.
+
+2023-06-17 GDB Administrator <gdbadmin@sourceware.org>
+
+ Automatic date update in version.in
+
+2023-06-16 Tom de Vries <tdevries@suse.de>
+
+ [gdb/testsuite] Clean up before compilation in gdb.ada/call-no-debug.exp
+ Running test-case gdb.ada/call-no-debug.exp with target board unix/-m64 works
+ fine, but if we run it again with target board unix-m32, we run into:
+ ...
+ gnatlink prog.ali -m32 -g -o prog^M
+ ld: i386:x86-64 architecture of input file `b~prog.o' is incompatible with \
+ i386 output^M
+ ...
+
+ This is due to compiling with no-force.
+
+ The test-case:
+ - first compiles pck.adb into pck.o (without debug info), and
+ - then compiles prog.adb and pck.o into prog (with debug info).
+
+ Using no-force in the second compilation make sure that pck.adb is not
+ compiled again, with debug info.
+
+ But it also means it will pick up intermediate files related to prog.adb from
+ a previous compilation.
+
+ Fix this by removing prog.o and prog.ali before compilation.
+
+ Tested on x86_64-linux.
+
+2023-06-16 Tom de Vries <tdevries@suse.de>
+
+ [gdb/testsuite] Use %progbits in gdb.arch/thumb*.S
+ In commit 0f2cd53cf4f ("[gdb/testsuite] Handle missing .note.GNU-stack") I
+ updated a gdb.arch/arm*.S test-case to use %progbits rather than @progbits,
+ but failed to do so for gdb.arch/thumb*.S. Fix this oversight.
+
+ Tested on arm-linux-gnueabihf.
+
+2023-06-16 mengqinggang <mengqinggang@loongson.cn>
+
+ LoongArch: Fix ld "undefined reference" error with --enable-shared
+ Because _bfd_read_unsigned_leb128 is hidden visibility, so it can't
+ be referenced out of shared object.
+
+ The new function loongarch_get_uleb128_length just used to call
+ _bfd_read_unsigned_leb128.
+
+ bfd/ChangeLog:
+
+ * elfxx-loongarch.c (loongarch_get_uleb128_length): New function.
+ * elfxx-loongarch.h (loongarch_get_uleb128_length): New function.
+
+ gas/ChangeLog:
+
+ * config/tc-loongarch.c (md_apply_fix): Use
+ loongarch_get_uleb128_length.
+
+2023-06-16 Andrew Burgess <aburgess@redhat.com>
+
+ gdb: update IRC reference from Freenode to Libera.Chat
+ It's been some time since the switch from Freenode to Libera.Chat,
+ however, there's still a reference to Freenode in the 'gdb --help'
+ output. Lets update that.
+
+2023-06-16 Jan Beulich <jbeulich@suse.com>
+
+ x86: shrink Masking insn attribute to a single bit (boolean)
+ The logic can actually be expressed with less code that way, utilizing
+ that there are common patterns of when which form of masking is
+ permitted. This then also eliminates the large set of open-codings of
+ BOTH_MASKING in the opcode table.
+
+2023-06-16 Alan Modra <amodra@gmail.com>
+
+ Correct ld-elf/eh5 test for hppa64
+ Commit 3c0afdb78988 regressed this test for hppa64, because the test
+ had been enabled for hppa64 in the time between the mips changes and
+ their reversion. This patch isn't just a simple reapply, I recreated
+ the testsuite change by hand for hppa64: Two lines in eh5.d might need
+ further changes for mips.
+
+2023-06-16 GDB Administrator <gdbadmin@sourceware.org>
+
+ Automatic date update in version.in
+
+2023-06-15 Maciej W. Rozycki <macro@orcam.me.uk>
+
+ binutils/NEWS: Mention Sony Allegrex MIPS CPU support
+ Mention the addition of Sony Allegrex processor support to the MIPS port.
+
+ binutils/
+ * NEWS: Mention Sony Allegrex MIPS CPU support.
+
+2023-06-15 Maciej W. Rozycki <macro@orcam.me.uk>
+
+ MIPS/GAS/testsuite: Fix `-modd-spreg'/`-mno-odd-spreg' test invocations
+ Reformat `-modd-spreg'/`-mno-odd-spreg' test invocations in mips.exp to
+ fit in 79 columns
+
+ gas/
+ * testsuite/gas/mips/mips.exp: Reformat
+ `-modd-spreg'/`-mno-odd-spreg' test invocations.
+
+2023-06-15 David Guillen Fandos <david@davidgf.net>
+
+ Add additional missing Allegrex CPU instructions
+ Allegrex supports some MIPS32 and MIPS32r2 instructions (albeit with
+ some encoding differences) such as bit manipulation (ins/ext) and MLA
+ (madd/msub). It also features some new instructions like wsbw and
+ min/max or device-specific ones such as mfic.
+
+ Add rotation instructions to MIPS Allegrex CPU
+ The Allegrex CPU supports bit rotation instructions as described in the
+ MIPS32 release 2 CPU (even though it is a MIPS-2 based CPU).
+
+ Add MIPS Allegrex CPU as a MIPS2-based CPU
+ The Allegrex CPU was created by Sony Interactive Entertainment to power
+ their portable console, the PlayStation Portable.
+ The pspdev organization maintains all sorts of tools to create software
+ for said device including documentation.
+
+2023-06-15 Maciej W. Rozycki <macro@orcam.me.uk>
+
+ GAS/doc: Correct Tag_GNU_MIPS_ABI_MSA attribute description
+ Rewrite the paragraph to match the style of Tag_GNU_MIPS_ABI_FP text
+ immediately above, correcting grammar and formatting at the same time.
+
+ gas/
+ * doc/as.texi (MIPS Attributes): Correct Tag_GNU_MIPS_ABI_MSA
+ attribute description.
+
+2023-06-15 Maciej W. Rozycki <macro@orcam.me.uk>
+
+ Revert "MIPS: gas: alter 64 or 32 for mipsisa triples if march is implicit"
+ This reverts commit 094025a30bb2da19df3990e0c0ff8167af823aa1. It was
+ applied unapproved.
+
+ Revert "MIPS: default r6 if vendor is img"
+ This reverts commit be0d391f22fe6009c3be907753975a984cbbcc23. It was
+ applied unapproved.
+
+ Revert "MIPS: fix r6 testsuites"
+ This reverts commit ffc528aed56b9e2c171137da28690a9bb6861b0b. It was
+ applied unapproved.
+
+ Revert "MIPS: fix -gnuabi64 testsuite"
+ This reverts commit cb81e84c72933a7fad10b75b7e270d92d8d65251. It was
+ applied unapproved.
+
+ Revert "MIPS: fix some ld testcases with compiler"
+ This reverts commit a0631c1501c113c04891c9a24a9ff5276257f28d. It was
+ applied unapproved.
+
+ Revert "MIPS: add MT ASE support for micromips32"
+ This reverts commit acce83dacff0ce43677410c67aaae32817afe991. It was
+ applied unapproved.
+
+ Revert "MIPS: sync oprand char usage between mips and micromips"
+ This reverts commit 5b207b919483f67311a73dfc1de8897ecfd8e776. It was
+ applied unapproved.
+
+2023-06-15 Alan Modra <amodra@gmail.com>
+
+ Re: Add some expected failures for bfin linker tests
+ After commit 7ade0f1582c4 I was seeing bfin-elf +XPASS: weak symbols,
+ and on looking into the bfin targets a little, discovered we have two
+ bfin-linux targets. One, bfin-uclinux, is like bfin-elf in that
+ ld -m elf32bfin is the default, and the other, bfin-linux-uclibc where
+ ld -m elf32bfinfd is the default. So putting bfin-*-*linux* in test
+ xfails or elsewhere is wrong. We want bfin-*-linux* instead to just
+ select the fdpic bfin target.
+
+ This patch corrects wrong bfin target triples in the ld testsuite,
+ not just the recent change but others I'd added to xfails too.
+ It also fixes the bfin-linux-uclibc ld-elf/64ksec fail
+
+2023-06-15 Alan Modra <amodra@gmail.com>
+
+ vms write_archive memory leaks
+ This fixes two memory leaks in the vms archive handling.
+
+ * vms-lib.c (_bfd_vms_lib_build_map): Free input symbols.
+ (_bfd_vms_lib_write_archive_contents): Free archive map symbols.
+
+2023-06-15 GDB Administrator <gdbadmin@sourceware.org>
+
+ Automatic date update in version.in
+
+2023-06-14 Tom de Vries <tdevries@suse.de>
+
+ [gdb/testsuite] Fix gdb.base/step-over-exit.exp with glibc debuginfo
+ In test-case gdb.base/step-over-exit.exp, we set a breakpoint on _exit and
+ continue, expecting to hit the breakpoint.
+
+ Without glibc debug info installed, we have with target board unix/-m64:
+ ...
+ Thread 2.1 "step-over-exit" hit Breakpoint 2.2, 0x00007ffff7d46aee in \
+ _exit () from /lib64/libc.so.6^M
+ (gdb) PASS: gdb.base/step-over-exit.exp: continue to exit
+ ...
+ and with target board unix/-m32:
+ ...
+ Thread 2.1 "step-over-exit" hit Breakpoint 2.2, 0xf7d84c25 in _exit () from \
+ /lib/libc.so.6^M
+ (gdb) PASS: gdb.base/step-over-exit.exp: continue to exit
+ ...
+
+ However after installing debug info (packages glibc-debuginfo and
+ glibc-32bit-debuginfo), we have for -m64 (note: __GI__exit instead of _exit):
+ ...
+ Thread 2.1 "step-over-exit" hit Breakpoint 2.2, \
+ __GI__exit (status=<optimized out>) at \
+ ../sysdeps/unix/sysv/linux/_exit.c:27^M
+ 27 {^M
+ (gdb) PASS: gdb.base/step-over-exit.exp: continue to exit
+ ...
+ and -m32 (note: _Exit instead of _exit):
+ ...
+ Thread 2.1 "step-over-exit" hit Breakpoint 2.2, _Exit () at \
+ ../sysdeps/unix/sysv/linux/i386/_exit.S:24^M
+ 24 ../sysdeps/unix/sysv/linux/i386/_exit.S: No such file or directory.^M
+ (gdb) FAIL: gdb.base/step-over-exit.exp: continue to exit
+ ...
+
+ The gdb_test allows for both _exit and __GI__exit, but not _Exit:
+ ...
+ gdb_test "continue" \
+ "Continuing\\..*Breakpoint $decimal.*_exit \\(.*\\).*" \
+ "continue to exit"
+ ...
+
+ Fix this by allowing _Exit as well.
+
+ Tested on x86_64-linux.
+
+2023-06-14 Nick Clifton <nickc@redhat.com>
+
+ Add some expected failures for bfin linker tests
+
+ Add --remap-inputs option to the BFD linker.
+ PR 30374
+ * ldfile.c (struct input_remap): New structure. (ldfile_add_remap): New function. (ldfile_remap_input_free): New function. (ldfile_add_remap_file): New function. (ldfile_possibly_remap_input): New function. (ldfile_print_input_remaps): New function. * ldfile.h: Add prototypes for new functions.
+ * ldlang.c (new_afile): Call ldfile_possibly_remap_input. (lang_finish): Call ldfile_remap_input_free. (lang_map): Call ldfile_print_input_remaps.
+ * ldlex.h (OPTION_REMAP_INPUTS, OPTION_REMAP_INPUTS_FILE): Define.
+ * lexsup.c (ld_options): Add --remap-inputs-file and --remap-inputs. (parse_args): Handle new options.
+ * NEWS: Mention the new feature.
+ * ld.texi: Document the new options.
+ * testsuite/ld-misc/input-remap.exp: New test driver.
+ * testsuite/ld-misc/remaps.r: New file: Expected linker output.
+ * testsuite/ld-misc/remaps.txt: New file. Input remaps file.
+
+2023-06-14 Alan Modra <amodra@gmail.com>
+
+ asprintf memory leaks
+ A number of backends want to return bfd_reloc_dangerous messaqes from
+ relocation special_function, and construct the message using asprintf.
+ Such messages are not freed anywhere, leading to small memory leaks
+ inside libbfd. To limit the leaks, I'd implemented a static buffer in
+ the ppc backends that was freed before use in asprintf output. This
+ patch extends that scheme to other backends using a shared static
+ buffer and goes further in freeing the buffer on any bfd_close.
+
+ The patch also fixes a few other cases where asprintf output was not
+ freed after use.
+
+ bfd/
+ * bfd.c (_input_error_msg): Make global and rename to..
+ (_bfd_error_buf): ..this.
+ (bfd_asprintf): New function.
+ (bfd_errmsg): Use bfd_asprintf.
+ * opncls.c (bfd_close_all_done): Free _buf_error_buf.
+ * elf32-arm.c (find_thumb_glue, find_arm_glue): Use bfd_asprintf.
+ * elf32-nios2.c (nios2_elf32_relocate_section): Likewise.
+ * elf32-ppc.c (ppc_elf_unhandled_reloc): Likewise.
+ * elf64-ppc.c (ppc64_elf_unhandled_reloc): Likewise.
+ * elfnn-riscv.c (riscv_resolve_pcrel_lo_relocs): Likewise.
+ (riscv_elf_relocate_section): Likewise.
+ * libbfd.h: Regenerate.
+ gas/
+ * read.c (read_end): Free current_name and current_label.
+ (do_s_func): Likewise on error path. strdup label.
+ ld/
+ * pe-dll.c (make_head, make_tail, make_one),
+ (make_singleton_name_thunk, make_import_fixup_entry),
+ (make_runtime_pseudo_reloc),
+ (pe_create_runtime_relocator_reference: Free oname after use.
+
+2023-06-14 Alan Modra <amodra@gmail.com>
+
+ Re: bfd/elf.c strtab memory leak
+ There are other places that leak the strtab.
+
+ * elf.c (_bfd_elf_compute_section_file_positions): Free strtab
+ on error paths.
+
+2023-06-14 GDB Administrator <gdbadmin@sourceware.org>
+
+ Automatic date update in version.in
+
+2023-06-13 Tom de Vries <tdevries@suse.de>
+
+ [gdb/testsuite] Fix gdb.tui/long-prompt.exp with read1
+ When running test-case gdb.tui/long-prompt.exp with check-read1, we get:
+ ...
+ (gdb) FAIL: gdb.tui/long-prompt.exp: prompt size == width + 1: \
+ end of screen: at last line
+ ...
+
+ The problem is in these commands:
+ ...
+ Term::command "echo \\n"
+ Term::command "echo \\n"
+ Term::command "echo \\n"
+ Term::command "echo \\n"
+ ...
+
+ The last one makes the terminal scroll, and the scrolling makes the expected
+ output match on a different line.
+
+ Fix this by replacing the sequence with a single command:
+ ...
+ Term::command "echo \\n\\n\\n\\n\\n\\n"
+ ...
+ which avoids scrolling.
+
+ Tested on x86_64-linux.
+
+2023-06-13 Tom de Vries <tdevries@suse.de>
+
+ [gdb/testsuite] Fix and add prompt anchoring in tuiterm
+ There is a test-case that contains a unit test for tuiterm:
+ gdb.tui/tuiterm.exp.
+
+ However, this only excercises the tuiterm itself, and not the functions that
+ interact with it, like Term::command.
+
+ Add a new test-case gdb.tui/tuiterm-2.exp that:
+ - overrides proc accept_gdb_output (to be able simulate incorrect responses
+ while avoiding the timeout),
+ - overrides proc send_gdb (to be able to call Term::command without a gdb
+ instance, such that all tuiterm input is generated by the test-case).
+ - issues Term::command calls, and
+ - checks whether they behave correctly.
+
+ This exposes a problem in Term::command. The "prompt before command" regexp
+ starts with a bit that is supposed to anchor the prompt to the border:
+ ...
+ set str "(^|\|)$gdb_prompt $str"
+ ...
+ but that doesn't work due to insufficient escaping. Fix this by adding the
+ missing escape:
+ ...
+ set str "(^|\\|)$gdb_prompt $str"
+ ...
+
+ Futhermore, the "prompt after command" regexp in Term::wait_for has no
+ anchoring at all:
+ ...
+ set prompt_wait_for "$gdb_prompt \$"
+ ...
+ so add that as well.
+
+ Tested on x86_64-linux.
+
+2023-06-13 Tom de Vries <tdevries@suse.de>
+
+ [gdb/testsuite] Allow procs with default value args in with_override
+ Currently proc with_override does not work with procs with default value args.
+
+ Fix this, and add a test-case excercising this scenario.
+
+ Tested on x86_64-linux.
+
+2023-06-13 Tom de Vries <tdevries@suse.de>
+
+ [gdb/testsuite] Fix gdb.dap/type_check.exp with older python
+ On openSUSE Leap 15.4 with system python 3.6, I run into:
+ ...
+ (gdb) python check_everything()^M
+ (gdb) FAIL: gdb.dap/type_check.exp: type checker
+ ...
+
+ In check_everything, the hasattr test fails silently:
+ ...
+ def check_everything():
+ # Older versions of Python can't really implement this.
+ if hasattr(typing, "get_origin"):
+ ...
+ and that makes the gdb_test in the test-case fail.
+
+ Fix this by emitting UNSUPPORTED instead in check_everything, and detecting
+ this in the test-case.
+
+ Tested on x86_64-linux.
+
+2023-06-13 Lancelot SIX <lancelot.six@amd.com>
+
+ gdb/testsuite: use proper int size for gdb.dwarf2/symbol_needs_eval*.exp
+ We recently realized that symbol_needs_eval_fail.exp and
+ symbol_needs_eval_timeout.exp invalidly dereference an int (4 bytes on
+ x86_64) by reading 8 bytes (the size of a pointer).
+
+ Here how it goes:
+
+ In gdb/testsuite/gdb.dwarf2/symbol_needs_eval.c a global variable is
+ defined:
+
+ int exec_mask = 1;
+
+ and later both tests build some DWARF using the assembler doing:
+
+ set exec_mask_var [gdb_target_symbol exec_mask]
+ ...
+ DW_TAG_variable {
+ {DW_AT_name a}
+ {DW_AT_type :$int_type_label}
+ {DW_AT_location {
+ DW_OP_addr $exec_mask_var
+ DW_OP_deref
+ ...
+ }
+ }
+
+ The definition of the DW_OP_deref (from Dwarf5 2.5.1.3 Stack Operations)
+ says that "The size of the data retrieved from the dereferenced address
+ is the size of an address on the target machine."
+
+ On x86_64, the size of an int is 4 while the size of an address is 8.
+ The result is that when evaluating this expression, the debugger reads
+ outside of the `a` variable.
+
+ Fix this by using `DW_OP_deref_size $int_size` instead. To achieve
+ this, this patch adds the necessary steps so we can figure out what
+ `sizeof(int)` evaluates to for the current target.
+
+ While at it, also change the definition of the int type in the assembled
+ DWARF information so we use the actual target's size for an int instead
+ of the literal 4.
+
+ Tested on x86_64 Linux.
+
+ Approved-By: Tom Tromey <tom@tromey.com>
+
+2023-06-13 GDB Administrator <gdbadmin@sourceware.org>
+
+ Automatic date update in version.in
+
+2023-06-13 Kevin Buettner <kevinb@redhat.com>
+
+ Simplify case DW_OP_GNU_uninit in dwarf_expr_context::execute_stack_op
+ Tom Tromey pointed out that the test and call to error() for the
+ DW_OP_GNU_uninit case in dwarf_expr_context::execute_stack_op (in
+ gdb/dwarf2/expr.c)...
+
+ if (op_ptr != op_end && *op_ptr != DW_OP_piece
+ && *op_ptr != DW_OP_bit_piece)
+ error (_("DWARF-2 expression error: DW_OP_GNU_uninit must always "
+ "be the very last op in a DWARF expression or "
+ "DW_OP_piece/DW_OP_bit_piece piece."));
+
+ ...could be replaced by a call to dwarf_expr_require_composition which
+ performs a similar check and outputs a suitable error message.
+
+2023-06-12 Simon Farre <simon.farre.cx@gmail.com>
+
+ Added self to W.A.A. maintainers
+
+2023-06-12 Richard Bunt <richard.bunt@linaro.org>
+
+ gdb/testsuite: Testing with the armflang compiler
+ Currently the Fortran test suite does not run with armflang because the
+ compiler detection fails. This in turn means fortran_runto_main does not
+ know which main method to use to start a test case.
+
+ Fortran compiler detection was added in 44d469c5f85; however, the commit
+ message notes that it was not tested with armflang.
+
+ This commit tests and fixes up a minor issue to get the detection
+ working.
+
+ The goal here is to get the tests running and preventing further
+ regressions during future work. This change does not do anything to fix
+ existing failures.
+
+ >From what I can understand, the auto detection leverages the
+ preprocessor to extract the Fortran compiler identity from the defines.
+ This preprocessor output is then evaluated by the test suite to import
+ these defines.
+
+ In the case of armflang, this evaluation step is disrupted by the
+ presence of the following warning:
+
+ $ armflang -E -fdiagnostics-color=never testsuite/lib/compiler.F90 -o compiler.exp
+ $ clang-13: warning: argument unused during compilation: '-fdiagnostics-color=never' [-Wunused-command-line-argument]
+
+ The evaluation logic is already set up to filter this warning, but the
+ prefix differs.
+
+ This commit fixes the issue by updating the filter to exclude the
+ armflang flavour of warning.
+
+ gdb.fortran regression tests run with GNU, Intel and Intel LLVM. No
+ regressions detected.
+
+ The gdb.fortran test results with ACfL 23.04.1 are as follows.
+
+ Before:
+
+ # of expected passes 560
+ # of unexpected failures 113
+ # of unresolved testcases 2
+ # of untested testcases 5
+ # of duplicate test names 2
+
+ After:
+
+ # of expected passes 5388
+ # of unexpected failures 628
+ # of known failures 10
+ # of untested testcases 8
+ # of unsupported tests 5
+ # of duplicate test names 5
+
+ As can be seen from the above, there are now considerably more passing
+ assertions.
+
+ Reviewed-By: Luis Machado <luis.machado@arm.com>
+ Approved-By: Tom Tromey <tom@tromey.com>
+
+2023-06-12 Tom Tromey <tromey@adacore.com>
+
+ Remove f-strings from DAP
+ Kévin pointed out that gdb claims a minimum Python version of 3.2, but
+ the DAP code uses f-strings, which were added in 3.6.
+
+ This patch removes the uses of f-strings from the DAP code. I can't
+ test an older version of Python, but I did confirm that this still
+ works with the version I have.
+
+2023-06-12 Tom Tromey <tromey@adacore.com>
+
+ Implement DAP conditional breakpoints
+ I realized that I had only implemented DAP breakpoint conditions for
+ exception breakpoints, and not other kinds of breakpoints. This patch
+ corrects the oversight.
+
+2023-06-12 Tom Tromey <tromey@adacore.com>
+
+ Do not report totalFrames from DAP stackTrace request
+ Currently, gdb will unwind the entire stack in response to the
+ stackTrace request. I had erroneously thought that the totalFrames
+ attribute was required in the response. However, the spec says:
+
+ If omitted or if `totalFrames` is larger than the available
+ frames, a client is expected to request frames until a request
+ returns less frames than requested (which indicates the end of the
+ stack).
+
+ This patch removes this from the response in order to improve
+ performance when the stack trace is very long.
+
+2023-06-12 Tom Tromey <tromey@adacore.com>
+
+ Implement DAP breakpointLocations request
+ This implements the DAP breakpointLocations request.
+
+2023-06-12 Tom Tromey <tromey@adacore.com>
+
+ Add "stop at main" extension to DAP launch request
+ Co-workers who work on a program that uses DAP asked for the ability
+ to have gdb stop at the main subprogram when launching. This patch
+ implements this extension.
+
+ Reviewed-By: Eli Zaretskii <eliz@gnu.org>
+
+2023-06-12 Tom Tromey <tromey@adacore.com>
+
+ Add "target" parameter to DAP attach request
+ This adds a new "target" to the DAP attach request. This is passed to
+ "target remote". I thought "attach" made the most sense for this,
+ because in some sense gdb is attaching to a running process. It's
+ worth noting that all DAP "attach" parameters are defined by the
+ implementation.
+
+ Reviewed-By: Eli Zaretskii <eliz@gnu.org>
+
+2023-06-12 Tom Tromey <tromey@adacore.com>
+
+ Handle DAP supportsVariableType capability
+ A DAP client can report the supportsVariableType capability in the
+ initialize request. In this case, gdb can include the type of a
+ variable or expression in various results.
+
+ Implement DAP setExpression request
+ This implements the DAP setExpression request.
+
+2023-06-12 Tom Tromey <tromey@adacore.com>
+
+ Add gdb.Value.assign method
+ This adds an 'assign' method to gdb.Value. This allows for assignment
+ without requiring the use of parse_and_eval.
+
+ Reviewed-By: Eli Zaretskii <eliz@gnu.org>
+
+2023-06-12 Tom Tromey <tromey@adacore.com>
+
+ Add type-checking to DAP requests
+ It occurred to me recently that gdb's DAP implementation should
+ probably check the types of objects coming from the client. This
+ patch implements this idea by reusing Python's existing type
+ annotations, and supplying a decorator that verifies these at runtime.
+
+ Python doesn't make it very easy to do runtime type-checking, so the
+ core of the checker is written by hand. I haven't tried to make a
+ fully generic runtime type checker. Instead, this only checks the
+ subset that is needed by DAP. For example, only keyword-only
+ functions are handled.
+
+ Furthermore, in a few spots, it wasn't convenient to spell out the
+ type that is accepted. I've added a couple of comments to this effect
+ in breakpoint.py.
+
+ I've tried to make this code compatible with older versions of Python,
+ but I've only been able to try it with 3.9 and 3.10.
+
+2023-06-12 Tom Tromey <tromey@adacore.com>
+
+ Use tuples for default arguments in DAP
+ My co-worker Kévin taught me that using a mutable object as a default
+ argument in Python is somewhat dangerous, because the object is
+ created a single time (when the function is defined), and so if it is
+ mutated in the body of the function, the changes will stick around.
+
+ This patch changes the cases like this in DAP to use () rather than []
+ as the default. This patch is merely preventative, as no bugs like
+ this are in the code.
+
+2023-06-12 Tom Tromey <tromey@adacore.com>
+
+ Fix a latent bug in DAP request decorator
+ The 'request' decorator is intended to also ensure that the request
+ function runs in the DAP thread. However, the unwrapped function is
+ installed in the global request map, so the wrapped version is never
+ called. This patch fixes the bug.
+
+ Add test for DAP pause request
+ I neglected to write a test for the DAP "pause" request. This patch
+ adds one.
+
+ Rename one DAP function
+ When I first started implementing DAP, I had some vague plan of having
+ the implementation functions use the same name as the request. I
+ abandoned this idea, but one vestige remained. This patch renames the
+ one remaining function to be gdb-ish.
+
+ Add singleThread support to some DAP requests
+ A few DAP requests support a "singleThread" parameter, which is
+ somewhat similar to scheduler-locking. This patch implements support
+ for this.
+
+ Implement DAP stepOut request
+ This implements the DAP "stepOut" request.
+
+2023-06-12 Tom Tromey <tromey@adacore.com>
+
+ Implement DAP attach request
+ This implements the DAP "attach" request.
+
+ Note that the copyright dates on the new test source file are not
+ incorrect -- this was copied verbatim from another directory.
+
+ Reviewed-By: Eli Zaretskii <eliz@gnu.org>
+
+2023-06-12 Tom Tromey <tromey@adacore.com>
+
+ Implement DAP setExceptionBreakpoints request
+ This implements the DAP setExceptionBreakpoints request for Ada. This
+ is a somewhat minimal implementation, in that "exceptionOptions" are
+ not implemented (or advertised) -- I wasn't completely sure how this
+ feature is supposed to work.
+
+ I haven't added C++ exception handling here, but it's easy to do if
+ needed.
+
+ This patch relies on the new MI command execution support to do its
+ work.
+
+2023-06-12 Tom Tromey <tromey@adacore.com>
+
+ Don't require inferior execution for Ada catchpoints
+ Currently, Ada catchpoints require that the inferior be running.
+ However, there's no deep reason for this -- for example, C++ exception
+ catchpoints do not have this requirement. Instead, those work like
+ ordinary breakpoints: they are pending until the needed runtime
+ locations are seen.
+
+ This patch changes Ada catchpoints to work the same way.
+
+2023-06-12 Tom Tromey <tromey@adacore.com>
+
+ Mark members of ada_catchpoint "private"
+ This changes the members of ada_catchpoint to be private.
+
+ Turn should_stop_exception into a method of ada_catchpoint
+ This turns the should_stop_exception function in ada-lang.c into a
+ method of ada_catchpoint.
+
+ Combine create_excep_cond_exprs and ada_catchpoint::re_set
+ This patch merges create_excep_cond_exprs into ada_catchpoint::re_set.
+ This is less verbose and is also a step toward making ada_catchpoint
+ work more like the other code_breakpoint-based exception catchpoints.
+
+ Transfer ownership of exception string to ada_catchpoint
+ This changes the ada_catchpoint to require an rvalue ref, so that
+ ownership of the exception string can be transferred to the catchpoint
+ object.
+
+ Pass tempflag to ada_catchpoint constructor
+ This is a minor cleanup to pass tempflag to the ada_catchpoint
+ constructor.
+
+ Use gnat_runtime_has_debug_info in Ada catchpoint tests
+ This changes the Ada catchpoint tests to use
+ gnat_runtime_has_debug_info. This simplifies the code.
+
+ Stop gdb in gnat_runtime_has_debug_info
+ gnat_runtime_has_debug_info starts a new gdb to do its work. However,
+ it also leaves this gdb running, which can potentially confuse the
+ calling test -- I encountered this when writing a new DAP test. This
+ patch changes the proc to shut down gdb.
+
+2023-06-12 Tom de Vries <tdevries@suse.de>
+
+ [gdb/testsuite] Relax breakpoint count check in gdb.python/py-rbreak.exp
+ With a gdb 13.2 based package on SLE-15 aarch64, I run into:
+ ...
+ (gdb) PASS: gdb.python/py-rbreak.exp: nosharedlibrary
+ py sl = gdb.rbreak("^[^_]",minsyms=False)^M
+ Breakpoint 2 at 0x4004ac: file ../sysdeps/aarch64/crti.S, line 63.^M
+ ...
+ (gdb) py print(len(sl))^M
+ 12^M
+ (gdb) FAIL: gdb.python/py-rbreak.exp: check number of returned breakpoints is 11
+ ...
+
+ The FAIL is due to:
+ - the glibc object crti.o containing debug information for function
+ call_weak_fn, and
+ - the test-case not expecting this.
+
+ The debug information is there due to compiling glibc using a binutils which
+ contains commit 591cc9fbbfd ("gas/Dwarf: record functions").
+
+ I've run into a similar issue before, see commit 3fbbcf473a5 ("[gdb/testsuite]
+ Fix regexp in py-rbreak.exp").
+
+ The fix I applied there was to use a regexp "^[^_]" to filter out
+ __libc_csu_fini and __libc_csu_init, but that doesn't work for call_weak_fn.
+
+ Fix this by:
+ - reverting the regexp to "", and
+ - rewriting the check to require at least 11 functions, rather than a precise
+ match.
+
+ Tested on x86_64-linux.
+
+ PR testsuite/30538
+ Bug: https://sourceware.org/bugzilla/show_bug.cgi?id=30538
+
+2023-06-12 Tom de Vries <tdevries@suse.de>
+
+ [gdb/testsuite] Fix breakpoint regexp in gdb.ada/out_of_line_in_inlined.exp
+ With a gdb 13.2 based package on openSUSE Tumbleweed i586, I ran into:
+ ...
+ (gdb) run ^M
+ Starting program: out_of_line_in_inlined/foo_o224_021-all ^M
+ [Thread debugging using libthread_db enabled]^M
+ Using host libthread_db library "/lib/libthread_db.so.1".^M
+ ^M
+ Breakpoint 1.1, foo_o224_021.child1.child2 (s=...) at foo_o224_021.adb:26^M
+ 26 for C of S loop^M
+ (gdb) FAIL: gdb.ada/out_of_line_in_inlined.exp: scenario=all: \
+ run to foo_o224_021.child1.child2
+ ...
+
+ I can reproduce the same issue with gdb trunk on x86_64, by using optimize=-O3
+ instead of optimize=-O2.
+
+ Fix this by using $bkptno_num_re.
+
+ Tested on x86_64-linux.
+
+ PR testsuite/30539
+ Bug: https://sourceware.org/bugzilla/show_bug.cgi?id=30539
+
+2023-06-12 Tom de Vries <tdevries@suse.de>
+
+ [gdb/tui] Replace macro HELP_ATTRIBUTE_MODE with std::string
+ Replace macro HELP_ATTRIBUTE_MODE with a std::string.
+
+ Tested on x86_64-linux.
+
+ Reviewed-By: Bruno Larsen <blarsen@redhat.com>
+ Reviewed-By: Tom Tromey <tom@tromey.com>
+
+2023-06-12 mengqinggang <mengqinggang@loongson.cn>
+
+ LoongArch: gas: Relocations simplification when -mno-relax
+ Gas does not emit ADD/SUB relocation pairs for label differences
+ when -mno-relax.
+
+2023-06-12 GDB Administrator <gdbadmin@sourceware.org>
+
+ Automatic date update in version.in
+
+2023-06-11 Kevin Buettner <kevinb@redhat.com>
+
+ Permit DW_OP_GNU_uninit to be used with DW_OP_piece
+ This commit implements a fix for a bug reported against GDB on
+ Fedora bugzilla...
+
+ https://bugzilla.redhat.com/show_bug.cgi?id=2166796
+
+ The test case in that bug report involved running gdb against the 'jq'
+ program (which is a command-line JSON processor) on Fedora 37. Since
+ the debug info is compiler (and compile-time option) dependent, it
+ won't necessarily show up in other distributions or even past or
+ future versions of Fedora. (E.g. when trying the example shown below
+ on Fedora 38, GDB says that the value of 'value' has been optimized
+ out. I.e. it does not demonstrate the same DWARF error that can be
+ see when using Fedora 37.)
+
+ That said, on Fedora 37, the bug could be reproduced as follows:
+
+ [kev@f37-1 ~]$ gdb jq -q -ex 'b src/util.c:415' -ex 'r </dev/null'
+ Reading symbols from jq...
+
+ This GDB supports auto-downloading debuginfo from the following URLs:
+ <https://debuginfod.fedoraproject.org/>
+ Enable debuginfod for this session? (y or [n]) y
+ Debuginfod has been enabled.
+ To make this setting permanent, add 'set debuginfod enabled on' to .gdbinit.
+ Reading symbols from /home/kev/.cache/debuginfod_client/9d3c8b4197350a190a74972d481de32abf641aa4/debuginfo...
+ No source file named src/util.c.
+ Make breakpoint pending on future shared library load? (y or [n]) y
+ Breakpoint 1 (src/util.c:415) pending.
+ Starting program: /usr/bin/jq </dev/null
+ [Thread debugging using libthread_db enabled]
+ Using host libthread_db library "/lib64/libthread_db.so.1".
+
+ Breakpoint 1, jq_util_input_next_input (state=0x55555555d7f0) at src/util.c:416
+ 416 if (state->parser == NULL) {
+ (gdb) p value
+ DWARF-2 expression error: DW_OP_GNU_uninit must always be the very last op.
+
+ This is undesirable - rather than output an error about the DWARF
+ info, we'd prefer to see a value, even if it is uninitialized.
+
+ Examination of the debuginfo showed the following:
+
+ <1><468f1>: Abbrev Number: 112 (DW_TAG_subprogram)
+ <468f2> DW_AT_external : 1
+ <468f2> DW_AT_name : (indirect string, offset: 0x4781): jq_util_input_next_input
+ <468f6> DW_AT_decl_file : 10
+ <468f6> DW_AT_decl_line : 411
+ <468f8> DW_AT_decl_column : 4
+ <468f9> DW_AT_prototyped : 1
+ <468f9> DW_AT_type : <0x3f2>
+ <468fd> DW_AT_sibling : <0x4692e>
+ ...
+ <2><46921>: Abbrev Number: 102 (DW_TAG_variable)
+ <46922> DW_AT_name : (indirect string, offset: 0x8cb): value
+ <46926> DW_AT_decl_file : 10
+ <46926> DW_AT_decl_line : 414
+ <46928> DW_AT_decl_column : 6
+ <46929> DW_AT_type : <0x3f2>
+
+ Note that there's no DW_AT_location, so I looked for an abstract origin entry:
+
+ <2><2dfa0>: Abbrev Number: 90 (DW_TAG_variable)
+ <2dfa1> DW_AT_abstract_origin: <0x46921>
+ <2dfa5> DW_AT_location : 0x27cf1 (location list)
+ <2dfa9> DW_AT_GNU_locviews: 0x27ce1
+
+ (Note that the DW_AT_abstract_origin attribute's value is 0x46921 which
+ is the DIE for the local variable "value".)
+
+ Looking at the location list, I see:
+
+ 00027cf1 v000000000000000 v000000000000000 views at 00027ce1 for:
+ 000000000002f8fe 000000000002f92e (DW_OP_reg13 (r13); DW_OP_GNU_uninit; DW_OP_piece: 8; DW_OP_reg12 (r12); DW_OP_GNU_uninit; DW_OP_piece: 8)
+
+ While DW_OP_GNU_uninit is not the very last op, it is the last op
+ prior to DW_OP_piece. The fix involved changing the DW_OP_GNU_uninit
+ case in dwarf_expr_context::execute_stack_op in gdb/dwarf2/expr.c so
+ that DW_OP_GNU_uninit may appear just before DW_OP_piece.
+
+ With the fix in place, attempting to print 'value' now looks like
+ this:
+
+ (gdb) p value
+ $1 = [uninitialized] {kind_flags = 0 '\000', pad_ = 0 '\000', offset = 0,
+ size = 0, u = {ptr = 0x0, number = 0}}
+
+ Note that "[uninitialized]" is part of the output. (But also note
+ that there's an extra space character.)
+
+ I've made a new test case,
+ gdb.dwarf2/DW_OP_piece_with_DW_OP_GNU_uninit.exp, by adapting an
+ existing one, gdb.dwarf2/opt-out-not-implptr.exp. Since it uses the
+ DWARF assembler, the test case does not depend on a specific compiler
+ version or compiler options.
+
+ Tested on Fedora 37 and Fedora 38.
+
+2023-06-11 GDB Administrator <gdbadmin@sourceware.org>
+
+ Automatic date update in version.in
+
+2023-06-10 GDB Administrator <gdbadmin@sourceware.org>
+
+ Automatic date update in version.in
+
+2023-06-09 Indu Bhagat <indu.bhagat@oracle.com>
+
+ libsframe: testsuite: add sframe_find_fre tests for pltN entries
+ Add a new test plt-findfre-1 to ensure lookup of SFrame stack trace
+ information for pltN entries is correct.
+
+ In this test, a dummy SFrame FDE of type SFRAME_FDE_TYPE_PCMASK is
+ created. The size of the 'function code block' covered by the SFrame
+ FDE is equivalent to 5 pltN entries of 16 bytes each.
+
+ The test first looks up SFrame FREs for some addresses in the first pltN
+ entry, followed by lookups for some addresses in the fourth pltN entry.
+
+ libsframe/
+ * Makefile.in: Regenerated.
+ * testsuite/libsframe.find/find.exp: Add new test.
+ * testsuite/libsframe.find/local.mk: Likewise.
+ * testsuite/libsframe.find/plt-findfre-1.c: New test.
+
+2023-06-09 Indu Bhagat <indu.bhagat@oracle.com>
+
+ libsframe: fix sframe_find_fre for pltN entries
+ To find SFrame stack trace information from an FDE of type
+ SFRAME_FDE_TYPE_PCMASK, sframe_find_fre () was doing an operation
+ like,
+ (start_ip_offset & 0xff) >= (pc & 0xff), etc.
+
+ This is buggy and needs correction. The mask 0xff should be 0xf (to
+ work for a pltN entry of size say, 16 bytes).
+
+ At this time, the size of the pltN entry is implicitly assumed to be 16
+ bytes by libsframe. In next version of the SFrame format, we can encode
+ this information explicitly in the SFrame FDE.
+
+ For now, we should fix the code to at least behave correctly for the
+ generated code and the generated SFrame stack trace information for the
+ pltN entries on x86_64.
+
+ libsframe/
+ * sframe.c (sframe_find_fre): Correct the bitmask used for
+ SFrame FDEs of type SFRAME_FDE_TYPE_PCMASK.
+
+2023-06-09 Luis Machado <luis.machado@arm.com>
+
+ [AArch64,arm] Fix some formatting issues in the aarch64/arm codebase
+ As noted by Tom Tromey, there are some formatting issues with the ternary
+ operator in the aarch64/arm codebase. This patch fixes those.
+
+ Reviewed-By: Tom Tromey <tom@tromey.com>
+
+2023-06-09 Tom de Vries <tdevries@suse.de>
+
+ [gdb/tui] Simplify tui_puts_internal
+ Simplify tui_puts_internal by using continue, as per this [1] coding standard
+ rule, making the function more readable and easier to understand.
+
+ No functional changes.
+
+ Tested on x86_64-linux.
+
+ [1] https://llvm.org/docs/CodingStandards.html#use-early-exits-and-continue-to-simplify-code
+
+ Reviewed-By: Tom Tromey <tom@tromey.com>
+
+2023-06-09 Tom de Vries <tdevries@suse.de>
+
+ [gdb/tui] Delete line buffer when switching to singlekey
+ Say we're in TUI mode, and type "sun":
+ ...
+ (gdb) sun
+ ...
+
+ After switching to SingleKey mode using C-x s, we have just:
+ ...
+ sun
+ ...
+
+ After typing "d", we get:
+ ...
+ sun
+ Undefined command: "sundown". Try "help".
+ ...
+
+ The SingleKey "d" is supposed run the "down" command.
+
+ Fix this by clearing the readline line buffer when switching to SingleKey
+ mode.
+
+ Tested on x86_64-linux.
+
+ PR tui/30522
+ Bug: https://sourceware.org/bugzilla/show_bug.cgi?id=30522
+
+ Reviewed-By: Tom Tromey <tom@tromey.com>
+
+2023-06-09 Tom de Vries <tdevries@suse.de>
+
+ [gdb/testsuite] Add test-case gdb.tui/single-key.exp
+ I noticed that there's no test-case excercising SingleKey mode, so add a test-case.
+
+ Tested on x86_64-linux.
+
+ Reviewed-By: Tom Tromey <tom@tromey.com>
+
+2023-06-09 Andrew Burgess <aburgess@redhat.com>
+
+ gdb/debuginfod: cleanup debuginfod earlier
+ A GDB crash was discovered on Fedora GDB that was tracked back to an
+ issue with the way that debuginfod is cleaned up.
+
+ The bug was reported on Fedora 37, 38, and 39. Here are the steps to
+ reproduce:
+
+ 1. The file /etc/ssl/openssl.cnf contains the following lines:
+
+ [provider_sect]
+ default = default_sect
+ ##legacy = legacy_sect
+ ##
+ [default_sect]
+ activate = 1
+
+ ##[legacy_sect]
+ ##activate = 1
+
+ The bug will occur when the '##' characters are removed so that the
+ lines in question look like this:
+
+ [provider_sect]
+ default = default_sect
+ legacy = legacy_sect
+
+ [default_sect]
+ activate = 1
+
+ [legacy_sect]
+ activate = 1
+
+ 2. Clean up any existing debuginfod cache data:
+
+ > rm -rf $HOME/.cache/debuginfod_client
+
+ 3. Run GDB:
+
+ > gdb -nx -q -iex 'set trace-commands on' \
+ -iex 'set debuginfod enabled on' \
+ -iex 'set confirm off' \
+ -ex 'start' -ex 'quit' /bin/ls
+ +set debuginfod enabled on
+ +set confirm off
+ Reading symbols from /bin/ls...
+ Downloading separate debug info for /usr/bin/ls
+ ... snip ...
+ Temporary breakpoint 1, main (argc=1, argv=0x7fffffffde38) at ../src/ls.c:1646
+ 1646 {
+ +quit
+
+ Fatal signal: Segmentation fault
+ ----- Backtrace -----
+ ... snip ...
+
+ So GDB ends up crashing during exit.
+
+ What's happening is that when debuginfod is initialised
+ debuginfod_begin is called (this is in the debuginfod library), this
+ in turn sets up libcurl, which makes use of openssl. Somewhere during
+ this setup process an at_exit function is registered to cleanup some
+ state.
+
+ Back in GDB the debuginfod_client object is managed using this code:
+
+ /* Deleter for a debuginfod_client. */
+
+ struct debuginfod_client_deleter
+ {
+ void operator() (debuginfod_client *c)
+ {
+ debuginfod_end (c);
+ }
+ };
+
+ using debuginfod_client_up
+ = std::unique_ptr<debuginfod_client, debuginfod_client_deleter>;
+
+ And then a global debuginfod_client_up is created to hold a pointer to
+ the debuginfod_client object. As a global this will be cleaned up
+ using the standard C++ global object destructor mechanism, which is
+ run after the at_exit handlers.
+
+ However, it is expected that when debuginfod_end is called the
+ debuginfod_client object will still be in a usable state, that is, we
+ don't expect the at_exit handlers to have run and started cleaning up
+ the library state.
+
+ To fix this issue we need to ensure that debuginfod_end is called
+ before the at_exit handlers have a chance to run.
+
+ This commit removes the debuginfod_client_up type, and instead has GDB
+ hold a raw pointer to the debuginfod_client object. We then make use
+ of GDB's make_final_cleanup to register a function that will call
+ debuginfod_end.
+
+ As GDB's final cleanups are called before exit is called, this means
+ that debuginfod_end will be called before the at_exit handlers are
+ called, and the crash identified above is resolved.
+
+ It's not obvious how this issue can easily be tested for. The bug does
+ not appear to manifest when using a local debuginfod server, so we'd
+ need to setup something more involved. For now I'm proposing this
+ patch without any associated tests.
+
+ Co-Authored-By: Mark Wielaard <mark@klomp.org>
+ Co-Authored-By: Simon Marchi <simark@simark.ca>
+ Reviewed-By: Tom Tromey <tom@tromey.com>
+ Reviewed-By: Aaron Merey <amerey@redhat.com>
+
+2023-06-09 Andrew Burgess <aburgess@redhat.com>
+
+ gdb: fix ASan failure after recent string changes
+ After this commit:
+
+ commit baab375361c365afee2577c94cbbd3fdd443d6da
+ Date: Tue Jul 13 14:44:27 2021 -0400
+
+ gdb: building inferior strings from within GDB
+
+ It was pointed out that a new ASan failure had been introduced which
+ was triggered by gdb.base/internal-string-values.exp:
+
+ (gdb) PASS: gdb.base/internal-string-values.exp: test_setting: all langs: lang=ada: ptype "foo"
+ print $_gdb_maint_setting("test-settings string")
+ =================================================================
+ ==80377==ERROR: AddressSanitizer: heap-buffer-overflow on address 0x603000068034 at pc 0x564785cba682 bp 0x7ffd20644620 sp 0x7ffd20644610
+ READ of size 1 at 0x603000068034 thread T0
+ #0 0x564785cba681 in find_command_name_length(char const*) /tmp/src/binutils-gdb/gdb/cli/cli-decode.c:2129
+ #1 0x564785cbacb2 in lookup_cmd_1(char const**, cmd_list_element*, cmd_list_element**, std::__cxx11::basic_string<char, std::char_traits<char>, std::allocator<char> >*, int, bool) /tmp/src/binutils-gdb/gdb/cli/cli-decode.c:2186
+ #2 0x564785cbb539 in lookup_cmd_1(char const**, cmd_list_element*, cmd_list_element**, std::__cxx11::basic_string<char, std::char_traits<char>, std::allocator<char> >*, int, bool) /tmp/src/binutils-gdb/gdb/cli/cli-decode.c:2248
+ #3 0x564785cbbcf3 in lookup_cmd(char const**, cmd_list_element*, char const*, std::__cxx11::basic_string<char, std::char_traits<char>, std::allocator<char> >*, int, int) /tmp/src/binutils-gdb/gdb/cli/cli-decode.c:2339
+ #4 0x564785c82df2 in setting_cmd /tmp/src/binutils-gdb/gdb/cli/cli-cmds.c:2219
+ #5 0x564785c84274 in gdb_maint_setting_internal_fn /tmp/src/binutils-gdb/gdb/cli/cli-cmds.c:2348
+ #6 0x564788167b3b in call_internal_function(gdbarch*, language_defn const*, value*, int, value**) /tmp/src/binutils-gdb/gdb/value.c:2321
+ #7 0x5647854b6ebd in expr::ada_funcall_operation::evaluate(type*, expression*, noside) /tmp/src/binutils-gdb/gdb/ada-lang.c:11254
+ #8 0x564786658266 in expression::evaluate(type*, noside) /tmp/src/binutils-gdb/gdb/eval.c:111
+ #9 0x5647871242d6 in process_print_command_args /tmp/src/binutils-gdb/gdb/printcmd.c:1322
+ #10 0x5647871244b3 in print_command_1 /tmp/src/binutils-gdb/gdb/printcmd.c:1335
+ #11 0x564787125384 in print_command /tmp/src/binutils-gdb/gdb/printcmd.c:1468
+ #12 0x564785caac44 in do_simple_func /tmp/src/binutils-gdb/gdb/cli/cli-decode.c:95
+ #13 0x564785cc18f0 in cmd_func(cmd_list_element*, char const*, int) /tmp/src/binutils-gdb/gdb/cli/cli-decode.c:2735
+ #14 0x564787c70c68 in execute_command(char const*, int) /tmp/src/binutils-gdb/gdb/top.c:574
+ #15 0x564786686180 in command_handler(char const*) /tmp/src/binutils-gdb/gdb/event-top.c:543
+ #16 0x56478668752f in command_line_handler(std::unique_ptr<char, gdb::xfree_deleter<char> >&&) /tmp/src/binutils-gdb/gdb/event-top.c:779
+ #17 0x564787dcb29a in tui_command_line_handler /tmp/src/binutils-gdb/gdb/tui/tui-interp.c:104
+ #18 0x56478668443d in gdb_rl_callback_handler /tmp/src/binutils-gdb/gdb/event-top.c:250
+ #19 0x7f4efd506246 in rl_callback_read_char (/usr/lib/libreadline.so.8+0x3b246) (BuildId: 092e91fc4361b0ef94561e3ae03a75f69398acbb)
+ #20 0x564786683dea in gdb_rl_callback_read_char_wrapper_noexcept /tmp/src/binutils-gdb/gdb/event-top.c:192
+ #21 0x564786684042 in gdb_rl_callback_read_char_wrapper /tmp/src/binutils-gdb/gdb/event-top.c:225
+ #22 0x564787f1b119 in stdin_event_handler /tmp/src/binutils-gdb/gdb/ui.c:155
+ #23 0x56478862438d in handle_file_event /tmp/src/binutils-gdb/gdbsupport/event-loop.cc:573
+ #24 0x564788624d23 in gdb_wait_for_event /tmp/src/binutils-gdb/gdbsupport/event-loop.cc:694
+ #25 0x56478862297c in gdb_do_one_event(int) /tmp/src/binutils-gdb/gdbsupport/event-loop.cc:264
+ #26 0x564786df99f0 in start_event_loop /tmp/src/binutils-gdb/gdb/main.c:412
+ #27 0x564786dfa069 in captured_command_loop /tmp/src/binutils-gdb/gdb/main.c:476
+ #28 0x564786dff61f in captured_main /tmp/src/binutils-gdb/gdb/main.c:1320
+ #29 0x564786dff75c in gdb_main(captured_main_args*) /tmp/src/binutils-gdb/gdb/main.c:1339
+ #30 0x564785381b6d in main /tmp/src/binutils-gdb/gdb/gdb.c:32
+ #31 0x7f4efbc3984f (/usr/lib/libc.so.6+0x2384f) (BuildId: 2f005a79cd1a8e385972f5a102f16adba414d75e)
+ #32 0x7f4efbc39909 in __libc_start_main (/usr/lib/libc.so.6+0x23909) (BuildId: 2f005a79cd1a8e385972f5a102f16adba414d75e)
+ #33 0x564785381934 in _start (/tmp/build/binutils-gdb/gdb/gdb+0xabc5934) (BuildId: 90de353ac158646e7dab501b76a18a76628fca33)
+
+ 0x603000068034 is located 0 bytes after 20-byte region [0x603000068020,0x603000068034) allocated by thread T0 here:
+ #0 0x7f4efcee0cd1 in __interceptor_calloc /usr/src/debug/gcc/gcc/libsanitizer/asan/asan_malloc_linux.cpp:77
+ #1 0x5647856265d8 in xcalloc /tmp/src/binutils-gdb/gdb/alloc.c:97
+ #2 0x564788610c6b in xzalloc(unsigned long) /tmp/src/binutils-gdb/gdbsupport/common-utils.cc:29
+ #3 0x56478815721a in value::allocate_contents(bool) /tmp/src/binutils-gdb/gdb/value.c:929
+ #4 0x564788157285 in value::allocate(type*, bool) /tmp/src/binutils-gdb/gdb/value.c:941
+ #5 0x56478815733a in value::allocate(type*) /tmp/src/binutils-gdb/gdb/value.c:951
+ #6 0x5647854ae81c in expr::ada_string_operation::evaluate(type*, expression*, noside) /tmp/src/binutils-gdb/gdb/ada-lang.c:10675
+ #7 0x5647854b63b8 in expr::ada_funcall_operation::evaluate(type*, expression*, noside) /tmp/src/binutils-gdb/gdb/ada-lang.c:11184
+ #8 0x564786658266 in expression::evaluate(type*, noside) /tmp/src/binutils-gdb/gdb/eval.c:111
+ #9 0x5647871242d6 in process_print_command_args /tmp/src/binutils-gdb/gdb/printcmd.c:1322
+ #10 0x5647871244b3 in print_command_1 /tmp/src/binutils-gdb/gdb/printcmd.c:1335
+ #11 0x564787125384 in print_command /tmp/src/binutils-gdb/gdb/printcmd.c:1468
+ #12 0x564785caac44 in do_simple_func /tmp/src/binutils-gdb/gdb/cli/cli-decode.c:95
+ #13 0x564785cc18f0 in cmd_func(cmd_list_element*, char const*, int) /tmp/src/binutils-gdb/gdb/cli/cli-decode.c:2735
+ #14 0x564787c70c68 in execute_command(char const*, int) /tmp/src/binutils-gdb/gdb/top.c:574
+ #15 0x564786686180 in command_handler(char const*) /tmp/src/binutils-gdb/gdb/event-top.c:543
+ #16 0x56478668752f in command_line_handler(std::unique_ptr<char, gdb::xfree_deleter<char> >&&) /tmp/src/binutils-gdb/gdb/event-top.c:779
+ #17 0x564787dcb29a in tui_command_line_handler /tmp/src/binutils-gdb/gdb/tui/tui-interp.c:104
+ #18 0x56478668443d in gdb_rl_callback_handler /tmp/src/binutils-gdb/gdb/event-top.c:250
+ #19 0x7f4efd506246 in rl_callback_read_char (/usr/lib/libreadline.so.8+0x3b246) (BuildId: 092e91fc4361b0ef94561e3ae03a75f69398acbb)
+
+ The problem is in cli/cli-cmds.c, in the function setting_cmd, where
+ we do this:
+
+ const char *a0 = (const char *) argv[0]->contents ().data ();
+
+ Here argv[0] is a value* which we know is either a TYPE_CODE_ARRAY or
+ a TYPE_CODE_STRING. The problem is that the above line is casting the
+ value contents directly to a C-string, i.e. one that is assumed to
+ have a null-terminator at the end.
+
+ After the above commit this can no longer be assumed to be true. A
+ string value will be represented just as it would be in the current
+ language, so for Ada and Fortran the string will be an array of
+ characters with no null-terminator at the end.
+
+ My proposed solution is to copy the string contents into a std::string
+ object, and then use the std::string::c_str() value, this will ensure
+ that a null-terminator has been added.
+
+ I had a check through GDB at places TYPE_CODE_STRING was used and
+ couldn't see any other obvious places where this type of assumption
+ was being made, so hopefully this is the only offender.
+
+ Running the above test with ASan compiled in no longer gives an error.
+
+ Reviewed-By: Tom Tromey <tom@tromey.com>
+
+2023-06-09 Tom Tromey <tromey@adacore.com>
+
+ Use scoped_value_mark in two more places
+ I found a couple of spots that could use scoped_value_mark. One of
+ them is a spot that didn't consider the possibility that value_mark
+ can return NULL. I tend to doubt this can be seen in this context,
+ but nevertheless this is safer.
+
+ Regression tested on x86-64 Fedora 36.
+
+2023-06-09 Tom de Vries <tdevries@suse.de>
+
+ [gdb] Fix typos
+ Fix typos:
+ - reponse -> response
+ - inital -> initial
+ - a -> an
+
+2023-06-09 Alan Modra <amodra@gmail.com>
+
+ readelf/objdump remember_state memory leaks
+ * dwarf.c (display_debug_frames <DW_CFA_restore_state>): Do free
+ invalid remember_state.
+
+2023-06-09 Alan Modra <amodra@gmail.com>
+
+ ecoff find_nearest_line and final link leaks
+ Freeing ecoff_debug_info "pointers to the unswapped symbolic info"
+ isn't a simple matter, due to differing allocation strategies. In
+ _bfd_ecoff_slurp_symbolic_info the pointers are to objalloc memory.
+ In the ecoff linker they are to separately malloc'd memory. In gas we
+ have most (obj-elf) or all (obj-ecoff) into a single malloc'd buffer.
+
+ This patch fixes the leaks for binutils and ld, leaving the gas leaks
+ for another day. The mips elf backend already had this covered, and
+ the ecoff backend had a pointer, raw_syments used as a flag, so most
+ of the patch is moving these around a little so they are accessible
+ for both ecoff and elf.
+
+ include/
+ * coff/ecoff.h (struct ecoff_debug_info): Add alloc_syments.
+ bfd/
+ * libecoff.h (struct ecoff_tdata): Delete raw_syments.
+ * elfxx-mips.c (free_ecoff_debug): Delete. Replace uses with
+ _bfd_ecoff_free_ecoff_debug_info.
+ (_bfd_mips_elf_final_link): Init debug.alloc_syments.
+ * ecofflink.c (_bfd_ecoff_free_ecoff_debug_info): New function.
+ * ecoff.c (_bfd_ecoff_bfd_free_cached_info): Call
+ _bfd_ecoff_free_ecoff_debug_info.
+ (_bfd_ecoff_slurp_symbolic_info): Replace uses of raw_syments
+ with alloc_syments.
+ (ecoff_final_link_debug_accumulate): Likewise. Use
+ _bfd_ecoff_free_ecoff_debug_info.
+ (_bfd_ecoff_bfd_copy_private_bfd_data): Set alloc_syments for
+ copied output.
+ * elf64-alpha.c (elf64_alpha_read_ecoff_info): Use
+ _bfd_ecoff_free_ecoff_debug_info.
+ * libbfd-in.h (_bfd_ecoff_free_ecoff_debug_info): Declare.
+ * libbfd.h: Regenerate.
+ gas/
+ * config/obj-ecoff.c (ecoff_frob_file): Set alloc_syments.
+ * config/obj-elf.c (elf_frob_file_after_relocs): Likewise.
+
+2023-06-09 GDB Administrator <gdbadmin@sourceware.org>
+
+ Automatic date update in version.in
+
+2023-06-08 Tom de Vries <tdevries@suse.de>
+
+ [gdb/testsuite] Add test-case gdb.tui/long-prompt.exp
+ I noticed that the test-suite doesn't excercise the case in
+ tui_redisplay_readline that height (initially 1) is changed by this call:
+ ...
+ tui_puts_internal (w, prompt, &height);
+ ...
+
+ Add a test-case that excercises this.
+
+ Tested on x86_64-linux.
+
+2023-06-08 Lancelot SIX <lancelot.six@amd.com>
+
+ gdb/corelow.c: do not try to reopen a file if open failed once
+ In the current implementation, core_target::build_file_mappings will try
+ to locate and open files which were mapped in the process for which the
+ core dump was produced. If the file cannot be found or cannot be
+ opened, GDB will re-try to open it once for each time it was mapped in
+ the process's address space.
+
+ This patch makes it so GDB recognizes that it has already failed to open
+ a given file once and does not re-try the process for each mapping.
+
+ Reviewed-By: John Baldwin <jhb@FreeBSD.org>
+ Approved-By: Andrew Burgess <aburgess@redhat.com>
+
+2023-06-08 Lancelot SIX <lancelot.six@amd.com>
+
+ gdb/corelow.c: avoid repeated warnings in build_file_mappings
+ When GDB opens a coredump it tries to locate and then open all files
+ which were mapped in the process.
+
+ If a file is found but cannot be opened with BFD (bfd_open /
+ bfd_check_format fails), then a warning is printed to the user. If the
+ same file was mapped multiple times in the process's address space, the
+ warning is printed once for each time the file was mapped. I find this
+ un-necessarily noisy.
+
+ This patch makes it so the warning message is printed only once per
+ file.
+
+ There was a comment in the code assuming that if the file was found on
+ the system, opening it (bfd_open + bfd_check_format) should always
+ succeed. A recent change in BFD (014a602b86f "Don't optimise bfd_seek
+ to same position") showed that this assumption is not valid. For
+ example, it is possible to have a core dump of a process which had
+ mmaped an IO page from a DRI render node (/dev/dri/runderD$NUM). In
+ such case the core dump does contain the information that portions of
+ this special file were mapped in the host process, but trying to seek to
+ position 0 will fail, making bfd_check_format fail. This patch removes
+ this comment.
+
+ Reviewed-By: John Baldwin <jhb@FreeBSD.org>
+ Approved-By: Andrew Burgess <aburgess@redhat.com>
+
+2023-06-08 Lancelot SIX <lancelot.six@amd.com>
+
+ gdb/corelow.c: fix use-after-free in build_file_mappings
+ In core_target::build_file_mappings, GDB tries to open files referenced
+ in the core dump.
+
+ The process goes like this:
+
+ struct bfd *bfd = bfd_map[filename];
+ if (bfd == nullptr)
+ {
+ bfd = bfd_map[filename]
+ = bfd_openr (expanded_fname.get (), "binary");
+ if (bfd == nullptr || !bfd_check_format (bfd, bfd_object))
+ {
+ if (bfd != nullptr)
+ bfd_close (bfd);
+ return;
+ }
+ }
+ asection *sec = bfd_make_section_anyway (bfd, "load");
+ ...
+
+ The problem is that if bfd_check_format fails, we close the bfd but keep
+ a reference to it in the bfd_map.
+
+ If the same filename appears another time in the NT_FILE note, we enter
+ this code again. The second time, bfd_map[filename] is not nullptr and
+ we try to call bfd_make_section_anyway on an already closed BFD, which
+ is a use-after-free error.
+
+ This patch makes sure that the bfd is only saved in the bfd_map if it
+ got opened successfully.
+
+ This error got exposed by a recent change in BFD (014a602b86f "Don't
+ optimise bfd_seek to same position"). Since this change, opening a
+ coredump which contains mapping to some special files such as a DRI
+ render node (/dev/dri/renderD$NUM) exposes the issue. This happens for
+ example for processes using AMDGPU devices to offload compute tasks.
+
+ Reviewed-By: John Baldwin <jhb@FreeBSD.org>
+ Approved-By: Andrew Burgess <aburgess@redhat.com>
+
+2023-06-08 Alan Modra <amodra@gmail.com>
+
+ Re: _bfd_free_cached_info
+ Oops, another leak caused by not defining the correct macro.
+
+ * elf32-mips.c: Define bfd_elf32_bfd_free_cached_info.
+ * elfn32-mips.c: Likewise.
+ * elf64-mips.c: Define bfd_elf64_bfd_free_cached_info.
+
+2023-06-08 Alan Modra <amodra@gmail.com>
+
+ Re: _bfd_free_cached_info
+ ELF targets with target-specific free_cache_info functions need to
+ call _bfd_elf_free_cached_info, not _bfd_generic_bfd_free_cached_info.
+
+ * elf64-ppc.c (ppc64_elf_free_cached_info): Call
+ _bfd_elf_free_cached_info.
+ * elfnn-aarch64.c (elfNN_aarch64_bfd_free_cached_info): Likewise.
+
+2023-06-08 GDB Administrator <gdbadmin@sourceware.org>
+
+ Automatic date update in version.in
+
+2023-06-07 Indu Bhagat <indu.bhagat@oracle.com>
+
+ libsframe: reuse static function sframe_decoder_get_funcdesc_at_index
+ sframe_decoder_get_funcdesc_at_index () is the function to access SFrame
+ FDEs in the SFrame decoder context. Use it consistently.
+
+ Avoid unnecessary type cast and include minor enhancements as the code
+ is moved around.
+
+ libsframe/
+ * sframe.c (sframe_decoder_get_funcdesc_at_index): Move some
+ checks here. Move the static function definition before the new
+ use.
+ (sframe_decoder_get_funcdesc): Use
+ sframe_decoder_get_funcdesc_at_index instead.
+
+2023-06-07 Tom Tromey <tromey@adacore.com>
+
+ Simplify ada_lookup_struct_elt_type
+ This patch simplifies ada_lookup_struct_elt_type by changing it to
+ call find_struct_field. The two functions were substantially similar,
+ even to the point of having identical comments.
+
+ I tested this using both the gdb test suite and the internal AdaCore
+ test suite. Given this and the fact that it is Ada-specific, I am
+ checking it in.
+
+2023-06-07 Nick Clifton <nickc@redhat.com>
+
+ Add extra linker warning message about discrepancies between normal and common symbols.
+ PR 30499
+ bfd * elflink.c (elf_link_add_object_symbols): Add a message indicating that alignment and size discrepancies between the definition of common symbols and normal symbols are serious and should be investigated.
+ ld * testsuite/ld-elfcomm/elfcomm.exp: Update regexps to match new output from the linker.
+
+2023-06-07 Tom de Vries <tdevries@suse.de>
+
+ [gdb/tui] Factor out border-mode help text
+ I noticed that the help texts for tui border-mode and tui active-border-mode
+ are similar.
+
+ Factor out the common part into macro HELP_ATTRIBUTE_MODE.
+
+ Tested on x86_64-linux.
+
+2023-06-07 Tom de Vries <tdevries@suse.de>
+
+ [gdb/cli] Handle pending ^C after rl_callback_read_char for readline 7
+ In commit faf01aee1d0 ("[gdb] Handle pending ^C after rl_callback_read_char")
+ we handled a problem (described in detail in that commit) for readline >= 8
+ using public readline functions rl_pending_signal and rl_check_signals.
+
+ For readline 7 (note that we require at least readline 7 so there's no need to
+ worry about readline 6), there was no fix though, because rl_check_signals was
+ not available.
+
+ Fix this by instead using the private readline function _rl_signal_handler.
+
+ There is precedent for using private readline variables and functions, but
+ it's something we want to get rid of (PR build/10723). Nevertheless, I think
+ we can allow this specific instance because it's not used when building
+ against readline >= 8.
+
+ [ In the meanwhile, a fix was committed in the devel branch of the readline
+ repo, contained in commit 8d0c439 ("rollup of changes since readline-8.2"),
+ first proposed here (
+ https://lists.gnu.org/archive/html/bug-readline/2022-10/msg00008.html ). ]
+
+ Tested on x86_64-linux, against system readline 7.0 on openSUSE Leap 15.4.
+
+ PR cli/27813
+ Bug: https://sourceware.org/bugzilla/show_bug.cgi?id=27813
+
+2023-06-07 Tom de Vries <tdevries@suse.de>
+
+ Fix PR30369 regression on aarch64/arm (PR30506)
+ The gdb.dwarf2/dw2-prologue-end-2.exp test was failing for both AArch64 and
+ Arm.
+
+ As Tom pointed out here (https://inbox.sourceware.org/gdb-patches/6663707c-4297-c2f2-a0bd-f3e84fc62aad@suse.de/),
+ there are issues with both the prologue skipper for AArch64 and Arm and an
+ incorrect assumption by the testcase.
+
+ This patch fixes both of AArch64's and Arm's prologue skippers to not skip past
+ the end of a function. It also incorporates a fix to the testcase so it
+ doesn't assume the prologue skipper will stop at the first instruction of the
+ functions/labels.
+
+ Regression-tested on aarch64-linux/arm-linux Ubuntu 20.04/22.04 and
+ x86_64-linux Ubuntu 20.04.
+
+ Bug: https://sourceware.org/bugzilla/show_bug.cgi?id=30506
+
+ Co-Authored-By: Tom de Vries <tdevries@suse.de>
+ Co-Authored-By: Luis Machado <luis.machado@arm.com>
+
+2023-06-07 Tom de Vries <tdevries@suse.de>
+
+ [gdb/testsuite] Add missing wait in gdb.python/tui-window-disabled.exp
+ While working on PR tui/30526, I noticed a bug in test-case
+ gdb.python/tui-window-disabled.exp.
+
+ Here we send "tui enable" to gdb, but don't wait for it to arrive before
+ checking for a window box:
+ ...
+ send_gdb "tui enable\n"
+ Term::check_box "check for python window" 0 0 80 16
+ ...
+
+ Fix this by waiting for the prompt to be issued in TUI before doing the check.
+
+ Tested on x86_64-linux.
+
+2023-06-07 Tom de Vries <tdevries@suse.de>
+
+ [gdb/testsuite] Fix two typos in gdb.python/tui-window-disabled.exp
+ Fix two typos in test-case gdb.python/tui-window-disabled.exp.
+
+2023-06-07 Tom de Vries <tdevries@suse.de>
+
+ [gdb/testsuite] Handle output after prompt in gdb.threads/step-N-all-progress.exp
+ Using "taskset -c 0" I run into this timeout:
+ ...
+ (gdb) PASS: gdb.threads/step-N-all-progress.exp: non-stop=on: \
+ target-non-stop=on: continue to breakpoint: break here
+ next 3^M
+ [New Thread 0x7ffff7dbd6c0 (LWP 10202)]^M
+ 50 return 0;^M
+ (gdb) [Thread 0x7ffff7dbd6c0 (LWP 10202) exited]^M
+ FAIL: gdb.threads/step-N-all-progress.exp: non-stop=on: target-non-stop=on: \
+ next 3 (timeout)
+ ...
+
+ The problem is that this test:
+ ...
+ gdb_test "next 3" "return 0;"
+ ...
+ expects no output after the prompt.
+
+ Fix this by using -no-prompt-anchor.
+
+ Tested on x86_64-linux.
+
+2023-06-07 Alan Modra <amodra@gmail.com>
+
+ ld-elf/eh5 remove xfail hppa64
+ Commit cb81e84c72 resulted in an xpass for hppa64-hp-hpux11, but the
+ test still fails on hpp64-linux. Let's make it pass for hppa64-linux
+ too, by accepting pcrel sdata8 encoding in the augmentation data.
+
+2023-06-07 Luis Machado <luis.machado@arm.com>
+
+ Fix gdb.base/memtag.exp failure
+ While running this test on an emulator, I noticed we're failing to match the
+ output message when "memory-tag check" is issued with no arguments. That's
+ because I coded the message using "error" and missed a period at the end. Other
+ similar messages are issued with error_no_arg.
+
+ This patch changes that call to use error_no_arg.
+
+ Tested on aarch64-linux Ubuntu 20.04/22.04.
+
+2023-06-07 Alan Modra <amodra@gmail.com>
+
+ _bfd_free_cached_info
+ doc/bfdint.texi and comments in the aout and som code about this
+ function are just wrong, and its name is not very apt. Better would
+ be _bfd_mostly_destroy, and we certainly should not be saying anything
+ about the possibility of later recreating anything lost by this
+ function. What's more, if _bfd_free_cached_info is called when
+ creating an archive map to reduce memory usage by throwing away
+ symbols, the target _close_and_cleanup function won't have access to
+ tdata or section bfd_user_data to tidy memory. This means most of the
+ target _close_and_cleanup function won't do anything, and therefore
+ sometimes will result in memory leaks.
+
+ This patch fixes the documentation problems and moves most of the
+ target _close_and_cleanup code to target _bfd_free_cached_info.
+ Another notable change is that bfd_generic_bfd_free_cached_info is now
+ defined as _bfd_free_cached_info rather than _bfd_bool_bfd_true,
+ ie. the default now frees objalloc memory.
+
+2023-06-07 Alan Modra <amodra@gmail.com>
+
+ Memory leaks in bfd/vms-lib.c
+ * vms-lib.c (vms_lib_read_index): Free malloc'd memory on error
+ return paths.
+ (vms_write_index, _bfd_vms_lib_write_archive_contents): Likewise.
+
+ bfd/elf.c strtab memory leak
+ * elf.c (_bfd_elf_compute_section_file_positions): Free strtab
+ on set_group_contents failure return path.
+
+2023-06-07 Alan Modra <amodra@gmail.com>
+
+ objcopy memory leaks after errors
+ These aren't important at all, but tidy them in case they obscure
+ other more important leaks.
+
+ * objcopy (copy_file): Close input bfd after errors.
+
+2023-06-07 GDB Administrator <gdbadmin@sourceware.org>
+
+ Automatic date update in version.in
+
+2023-06-06 Indu Bhagat <indu.bhagat@oracle.com>
+
+ libsframe: fix cosmetic issues and typos
+ include/
+ * sframe-api.h (sframe_decoder_get_num_fidx): Use extern.
+ libsframe/
+ * sframe-dump.c (dump_sframe_func_with_fres): Fix line length.
+ * sframe.c (sframe_frame_row_entry_copy): Likewise.
+ (sframe_decode_fre_start_address): Use the intended type uint32_t.
+
+2023-06-06 Alan Modra <amodra@gmail.com>
+
+ Re: loongarch readelf support
+ Commit 89c70cd358b8 apparently results in a bogus "value may be used
+ uninitialized" warning with some combination of compiler and
+ optimisation options.
+
+ * readelf.c (target_specific_reloc_handling): Init value.
+
+2023-06-06 GDB Administrator <gdbadmin@sourceware.org>
+
+ Automatic date update in version.in
+
+2023-06-05 Indu Bhagat <indu.bhagat@oracle.com>
+
+ libsframe: avoid unnecessary type casts
+ Change the data type of some of the members of the sframe_decoder_ctx
+ and sframe_encoder_ctx data structures to use the applicable data types
+ explicitly. Current implementation in libsframe does type casts, which
+ seem unnecessary.
+
+ libsframe/
+ * libsframe/sframe-impl.h (struct sframe_decoder_ctx): Use
+ applicable data type explicitly.
+ (struct sframe_encoder_ctx): Likewise. Use same style of
+ comments consistently.
+ * libsframe/sframe.c (struct sf_fde_tbl): Define without
+ typedef.
+ (struct sf_fre_tbl): Likewise.
+ (sframe_decode): Remove unnecessary type casts.
+ (sframe_encoder_get_funcdesc_at_index): Likewise.
+ (sframe_encoder_add_fre): Likewise.
+ (sframe_encoder_add_funcdesc): Likewise.
+ (sframe_sort_funcdesc): Likewise.
+ (sframe_encoder_write_sframe): Likewise.
+
+2023-06-05 H.J. Lu <hjl.tools@gmail.com>
+
+ ELF: Add "#pass" to ld-elf/pr30508.d
+ Add "#pass" to ld-elf/pr30508.d to allow extra segments.
+
+ PR binutils/30508
+ * testsuite/ld-elf/pr30508.d: Add "#pass".
+
+2023-06-05 Tom Tromey <tromey@adacore.com>
+
+ Use unrelocated_addr in dwarf2_fde
+ This changes dwarf2_fde to use the unrelocated_addr type. This
+ pointed out a latent bug in dwarf2_frame_cache, where a relocated
+ address is compared to an unrelocated address.
+
+2023-06-05 Tom Tromey <tromey@adacore.com>
+
+ Use local "text offset" variable in dwarf2_frame_cache
+ A few spots in dwarf2_frame_cache use:
+
+ cache->per_objfile->objfile->text_section_offset ()
+
+ ... and a subsequent patch will add more, so move this into a local
+ variable.
+
+2023-06-05 Tom Tromey <tromey@adacore.com>
+
+ Constify dwarf2_cie::augmentation
+ I noticed that dwarf2_cie::augmentation could be 'const'.
+
+ Use "unrelocated" terminology in linetable_entry
+ I forgot to convert struct linetable_entry to use the "unrelocated"
+ (as opposed to "raw") terminology. This patch corrects the oversight.
+
+ Fix comment in address_class
+ enum address_class has a stale comment referring to
+ MSYMBOL_VALUE_RAW_ADDRESS, which no longer exists. This patch updates
+ the comment.
+
+ Use unrelocated_addr in dwarf_decode_lines
+ This changes dwarf_decode_lines to accept an unrelocated_addr and
+ fixes up the fallout.
+
+ Use unrelocated_addr in the DWARF reader
+ This changes various spots in the DWARF reader to use
+ unrelocated_addr.
+
+ Move unrelocated_addr to common-types.h
+ unrelocated_addr is currently defined in symtab.h, but in order to
+ avoid having to include that in more places, I wanted to move the type
+ elsewhere. I considered defs.h, but it seemed reasonable to have it
+ next to CORE_ADDR, which is what this patch does.
+
+ Minor cleanup in loclist_describe_location
+ loclist_describe_location already has a per_objfile local variable, so
+ use it consistently.
+
+ Remove baseaddr parameter from dwarf2_record_block_ranges
+ dwarf2_record_block_ranges is only ever called with the text section
+ offset, so this patch removes the parameter entirely. This makes a
+ subsequent patch a little simpler.
+
+2023-06-05 H.J. Lu <hjl.tools@gmail.com>
+
+ ELF: Don't warn an empty PT_LOAD with the program headers
+ When rewriting the program headers, don't warn an empty PT_LOAD with the
+ program headers.
+
+ bfd/
+
+ PR binutils/30508
+ * elf.c (rewrite_elf_program_header): Don't warn if an empty
+ PT_LOAD contains the program headers.
+
+ ld/
+
+ PR binutils/30508
+ * testsuite/ld-elf/pr30508.d: New file.
+ * testsuite/ld-elf/pr30508.s: Likewise.
+
+2023-06-05 Andrew Burgess <aburgess@redhat.com>
+
+ gdb: building inferior strings from within GDB
+ History Of This Patch
+ =====================
+
+ This commit aims to address PR gdb/21699. There have now been a
+ couple of attempts to fix this issue. Simon originally posted two
+ patches back in 2021:
+
+ https://sourceware.org/pipermail/gdb-patches/2021-July/180894.html
+ https://sourceware.org/pipermail/gdb-patches/2021-July/180896.html
+
+ Before Pedro then posted a version of his own:
+
+ https://sourceware.org/pipermail/gdb-patches/2021-July/180970.html
+
+ After this the conversation halted. Then in 2023 I (Andrew) also took
+ a look at this bug and posted two versions:
+
+ https://sourceware.org/pipermail/gdb-patches/2023-April/198570.html
+ https://sourceware.org/pipermail/gdb-patches/2023-April/198680.html
+
+ The approach taken in my first patch was pretty similar to what Simon
+ originally posted back in 2021. My second attempt was only a slight
+ variation on the first.
+
+ Pedro then pointed out his older patch, and so we arrive at this
+ patch. The GDB changes here are mostly Pedro's work, but updated by
+ me (Andrew), any mistakes are mine.
+
+ The tests here are a combinations of everyone's work, and the commit
+ message is new, but copies bits from everyone's earlier work.
+
+ Problem Description
+ ===================
+
+ Bug PR gdb/21699 makes the observation that using $_as_string with
+ GDB's printf can cause GDB to print unexpected data from the
+ inferior. The reproducer is pretty simple:
+
+ #include <stddef.h>
+ static char arena[100];
+
+ /* Override malloc() so value_coerce_to_target() gets a known
+ pointer, and we know we"ll see an error if $_as_string() gives
+ a string that isn't null terminated. */
+ void
+ *malloc (size_t size)
+ {
+ memset (arena, 'x', sizeof (arena));
+ if (size > sizeof (arena))
+ return NULL;
+ return arena;
+ }
+
+ int
+ main ()
+ {
+ return 0;
+ }
+
+ And then in a GDB session:
+
+ $ gdb -q test
+ Reading symbols from /tmp/test...
+ (gdb) start
+ Temporary breakpoint 1 at 0x4004c8: file test.c, line 17.
+ Starting program: /tmp/test
+
+ Temporary breakpoint 1, main () at test.c:17
+ 17 return 0;
+ (gdb) printf "%s\n", $_as_string("hello")
+ "hello"xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
+ (gdb) quit
+
+ The problem above is caused by how value_cstring is used within
+ py-value.c, but once we understand the issue then it turns out that
+ value_cstring is used in an unexpected way in many places within GDB.
+
+ Within py-value.c we have a null-terminated C-style string. We then
+ pass a pointer to this string, along with the length of this
+ string (so not including the null-character) to value_cstring.
+
+ In value_cstring GDB allocates an array value of the given character
+ type, and copies in requested number of characters. However
+ value_cstring does not add a null-character of its own. This means
+ that the value created by calling value_cstring is only
+ null-terminated if the null-character is included in the passed in
+ length. In py-value.c this is not the case, and indeed, in most uses
+ of value_cstring, this is not the case.
+
+ When GDB tries to print one of these strings the value contents are
+ pushed to the inferior, and then read back as a C-style string, that
+ is, GDB reads inferior memory until it finds a null-terminator. For
+ the py-value.c case, no null-terminator is pushed into the inferior,
+ so GDB will continue reading inferior memory until a null-terminator
+ is found, with unpredictable results.
+
+ Patch Description
+ =================
+
+ The first thing this patch does is better define what the arguments
+ for the two function value_cstring and value_string should represent.
+ The comments in the header file are updated to describe whether the
+ length argument should, or should not, include a null-character.
+ Also, the data argument is changed to type gdb_byte. The functions as
+ they currently exist will handle wide-characters, in which case more
+ than one 'char' would be needed for each character. As such using
+ gdb_byte seems to make more sense.
+
+ To avoid adding casts throughout GDB, I've also added an overload that
+ still takes a 'char *', but asserts that the character type being used
+ is of size '1'.
+
+ The value_cstring function is now responsible for adding a null
+ character at the end of the string value it creates.
+
+ However, once we start looking at how value_cstring is used, we
+ realise there's another, related, problem. Not every language's
+ strings are null terminated. Fortran and Ada strings, for example,
+ are just an array of characters, GDB already has the function
+ value_string which can be used to create such values.
+
+ Consider this example using current GDB:
+
+ (gdb) set language ada
+ (gdb) p $_gdb_setting("arch")
+ $1 = (97, 117, 116, 111)
+ (gdb) ptype $
+ type = array (1 .. 4) of char
+ (gdb) p $_gdb_maint_setting("test-settings string")
+ $2 = (0)
+ (gdb) ptype $
+ type = array (1 .. 1) of char
+
+ This shows two problems, first, the $_gdb_setting and
+ $_gdb_maint_setting functions are calling value_cstring using the
+ builtin_char character, rather than a language appropriate type. In
+ the first call, the 'arch' case, the value_cstring call doesn't
+ include the null character, so the returned array only contains the
+ expected characters. But, in the $_gdb_maint_setting example we do
+ end up including the null-character, even though this is not expected
+ for Ada strings.
+
+ This commit adds a new language method language_defn::value_string,
+ this function takes a pointer and length and creates a language
+ appropriate value that represents the string. For C, C++, etc this
+ will be a null-terminated string (by calling value_cstring), and for
+ Fortran and Ada this can be a bounded array of characters with no null
+ terminator. Additionally, this new language_defn::value_string
+ function is responsible for selecting a language appropriate character
+ type.
+
+ After this commit the only calls to value_cstring are from the C
+ expression evaluator and from the default language_defn::value_string.
+
+ And the only calls to value_string are from Fortan, Ada, and ObjectC
+ related code.
+
+ Bug: https://sourceware.org/bugzilla/show_bug.cgi?id=21699
+
+ Co-Authored-By: Simon Marchi <simon.marchi@efficios.com>
+ Co-Authored-By: Andrew Burgess <aburgess@redhat.com>
+ Co-Authored-By: Pedro Alves <pedro@palves.net>
+ Approved-By: Simon Marchi <simon.marchi@efficios.com>
+
+2023-06-05 Tom de Vries <tdevries@suse.de>
+
+ [gdb] Fix grammar in comments and docs
+ Fix grammar in some comments and docs:
+ - machines that doesn't -> machines that don't
+ - its a -> it's a
+ - its the -> it's the
+ - if does its not -> if it does it's not
+ - one more instructions if doesn't match ->
+ one more instruction if it doesn't match
+ - it's own -> its own
+ - it's first -> its first
+ - it's pointer -> its pointer
+
+ I also came across "it's performance" in gdb/stubs/*-stub.c in the HP public
+ domain notice, I've left that alone.
+
+ Tested on x86_64-linux.
+
+2023-06-05 Tom de Vries <tdevries@suse.de>
+
+ [gdb] Fix more typos
+ Fix some more typos:
+ - distinquish -> distinguish
+ - actualy -> actually
+ - singe -> single
+ - frash -> frame
+ - chid -> child
+ - dissassembler -> disassembler
+ - uninitalized -> uninitialized
+ - precontidion -> precondition
+ - regsiters -> registers
+ - marge -> merge
+ - sate -> state
+ - garanteed -> guaranteed
+ - explictly -> explicitly
+ - prefices (nonstandard plural) -> prefixes
+ - bondary -> boundary
+ - formated -> formatted
+ - ithe -> the
+ - arrav -> array
+ - coresponding -> corresponding
+ - owend -> owned
+ - fials -> fails
+ - diasm -> disasm
+ - ture -> true
+ - tpye -> type
+
+ There's one code change, the name of macro SIG_CODE_BONDARY_FAULT changed to
+ SIG_CODE_BOUNDARY_FAULT.
+
+ Tested on x86_64-linux.
+
+2023-06-05 Alan Modra <amodra@gmail.com>
+
+ bfd_error_on_input messages
+ bfd_errmsg uses asprintf for bfd_error_on_input, which means we
+ currently leak memory. Keep a static pointer to the message and free
+ it in various places to minimise the leaks.
+ bfd_set_input_error (NULL, bfd_error_no_error) is a way to free up the
+ last string if that matters.
+
+ * bfd.c (input_error_msg): New static var.
+ (bfd_set_input_error): Free it here..
+ (bfd_init): ..and here..
+ (bfd_errmsg): ..and here. Use it for asprintf output.
+
+2023-06-05 Alan Modra <amodra@gmail.com>
+
+ Yet another ecoff fuzzed object fix
+ * ecoff.c (_bfd_ecoff_slurp_symbol_table): Sanity check fdr_ptr
+ csym against remaining space for symbols. Error on out of bounds
+ fdr_ptr fields.
+
+2023-06-05 YunQiang Su <yunqiang.su@cipunited.com>
+
+ MIPS: sync oprand char usage between mips and micromips
+ We should try our best to make mips32 using the same
+ oprand char with micromips. So for mips32, we use:
+
+ ^ is added for 5bit sa oprand for some new DSPr2 instructions:
+ APPEND, PREPEND, PRECR_SRA[_R].PH.W
+ the LSB bit is 11, like RD.
+ +t is removed for coprocessor 0 destination register.
+ 'E' does the samething.
+ +t is now used for RX oprand for MFTR/MTTR (MT ASE)
+ ? is added for sel oprand for MFTR/MTTR (MT ASE)
+ For mips32, the position of sel in MFTR/MTTR is same with mfc0 etc,
+ while for micromips, they are different.
+
+ We also add an extesion format of cftc2/cttc2/mftc2/mfthc2/mttc2/mtthc2:
+ concatenating rs with rx as the index of control or data.
+
+2023-06-05 YunQiang Su <yunqiang.su@cipunited.com>
+
+ MIPS: add MT ASE support for micromips32
+ These instructions are descripted in MD00768.
+
+ MIPS® Architecture for Programmers
+ Volume IV-f: The MIPS® MT Module for
+ the microMIPS32™ Architecture
+
+ Document Number: MD00768
+ Revision 1.12
+ July 16, 2013
+
+ https://s3-eu-west-1.amazonaws.com/downloads-mips/documents/MD00768-1C-microMIPS32MT-AFP-01.12.pdf
+
+2023-06-05 YunQiang Su <yunqiang.su@cipunited.com>
+
+ Revert "MIPS: add MT ASE support for micromips32"
+ This reverts commit 783a5f46b0583e9ed3a63acd3361009f46de5c17.
+
+2023-06-05 YunQiang Su <yunqiang.su@cipunited.com>
+
+ MIPS: add MT ASE support for micromips32
+ These instructions are descripted in MD00768.
+
+ MIPS® Architecture for Programmers
+ Volume IV-f: The MIPS® MT Module for
+ the microMIPS32™ Architecture
+
+ Document Number: MD00768
+ Revision 1.12
+ July 16, 2013
+
+ https://s3-eu-west-1.amazonaws.com/downloads-mips/documents/MD00768-1C-microMIPS32MT-AFP-01.12.pdf
+
+2023-06-05 YunQiang Su <yunqiang.su@cipunited.com>
+
+ MIPS: fix some ld testcases with compiler
+ 1. config/default.exp:
+ use -mabi=32 not for -gnuabi64
+ xfail_from_runlist: remove an element and mark it xfail.
+ 2. ld-elf/indirect.exp: xfail
+ indirect5a indirect5b indirect6a indirect6b
+ indirect5c indirect5d indirect6c indirect6d
+ 3. ld-elf/pr23658-2: mips output is not common
+ 4. ld-elf/shared.exp: non-run on mips: Build libpr16496b.so
+ 5. ld-elfvers/vers.exp:
+ xfail vers4, vers4b
+ no-run on mips: vers24a, vers24b, vers24c
+ 6. ld-gc/gc.exp: add -KPIC into asflags for pr13683, pr14265, pr19161
+ 7. ld-mips-elf/mips-elf.exp:
+ use noarch for mips16-local-stubs-1, since it use -mips4
+ 8. ld-plugin/lto.exp:
+ no-run on mips/linux: PR ld/12982
+ add -KPIC into asflags for lto-3r, lto-5r, PR ld/19317 (2)
+ xfail PR ld/15323 (4), PR ld/19317 (3)
+ 9. ld-plugin/plugin.exp: xfail
+ plugin claimfile lost symbol
+ plugin claimfile replace symbol
+ plugin claimfile replace symbol
+ plugin claimfile lost symbol with source
+ plugin claimfile replace symbol with source
+ plugin claimfile resolve symbol with source
+ plugin 2 with source lib
+ load plugin 2 with source
+ plugin 3 with source lib
+ load plugin 3 with source
+ 11. ld-selective/selective.exp: add -fno-PIC, which is needed for -mno-abicalls
+ 12. ld-shared/shared.exp: xfail shared (non PIC), shared (PIC main, non PIC so)
+
+ MIPS: fix -gnuabi64 testsuite
+ Test on:
+ mips64-linux-gnuabi64
+ mips64el-linux-gnuabi64
+ mipsisa64-linux-gnuabi64
+ mipsisa64el-linux-gnuabi64
+ mipsisa64r2-linux-gnuabi64
+ mipsisa64r2el-linux-gnuabi64
+ mipsisa64r6-linux-gnuabi64
+ mipsisa64r6el-linux-gnuabi64
+
+2023-06-05 YunQiang Su <yunqiang.su@cipunited.com>
+
+ MIPS: fix r6 testsuites
+ Introduce
+ run_dump_test_o32l
+ run_dump_test_n32l
+ run_dump_test_n64l
+ Which use `-march=from-abi` for pre-R6 testcases,
+ like micromips/mips16e etc.
+
+ For cases doesn't use run_dump_test_*, we use
+ -mips32r2 for micromips32
+ -mips1 for mips16-32
+ -march=from-abi for testcases to o32/n32/n64 both/all.
+
+ Replace `addi` with `addiu` for some cases for both r6 and pre-R6.
+
+ Introduce some new testcases for r6 with FPXX/FP64.
+ Introduce new testcase: comdat-reloc-r6.
+
+ Skip `default` in mips_arch_list_matching if triple is mipsisa*, due to:
+ 1)it will cannot match mipsr6@*.d: since mips32rN/mips64rN
+ will always be used, it won't be a problem.
+ 2)some test think -march=mips64rN will alway true for mipsisa64rN,
+ which is not true now.
+
+ This patch fix testsuite for all r6-default gnu triples:
+ mipsisa32r6-linux-gnu
+ mipsisa32r6el-linux-gnu
+ mips-img-linux-gnu
+ mipsel-img-linux-gnu
+ mipsisa64r6-linux-gnu
+ mipsisa64r6el-linux-gnu
+
+2023-06-05 YunQiang Su <yunqiang.su@cipunited.com>
+
+ MIPS: default r6 if vendor is img
+ This behavior is used by downstream toolchain since 2014.
+ We also set the default ABI for mips*-img-elf to O32.
+ The previous value is NO_ABI, which is not good default ABI.
+
+ We don't support mips64*-img* due to GCC doesn't support it,
+ and We believe that the multilib should be used for this case.
+
+2023-06-05 YunQiang Su <yunqiang.su@cipunited.com>
+
+ MIPS: gas: alter 64 or 32 for mipsisa triples if march is implicit
+ When configure with triples mipsisa[32,64]rN[el,], the march value
+ is pinned to a fix value if not given explicitly. for example
+ 1) mipsisa32r6-linux-gnu -n32 xx.s will complains that:
+ -march=mips32r6 is not compatible with the selected ABI
+ 2) mipsisa64r2el-linux-gnu -o32 generates objects with 64bit CPU:
+ ELF 32-bit LSB relocatable, MIPS, MIPS64 rel2 version 1 (SYSV)
+ They are not good default behaviors: Let's alter the CPU info
+
+ Since we are using these triples as a regular linux distributions,
+ let's alter march according to ABI.
+
+2023-06-05 GDB Administrator <gdbadmin@sourceware.org>
+
+ Automatic date update in version.in
+
+2023-06-04 GDB Administrator <gdbadmin@sourceware.org>
+
+ Automatic date update in version.in
+
+2023-06-03 Tom de Vries <tdevries@suse.de>
+
+ [gdb] Fix typos
+ Fix a few typos:
+ - implemention -> implementation
+ - convertion(s) -> conversion(s)
+ - backlashes -> backslashes
+ - signoring -> ignoring
+ - (un)ambigious -> (un)ambiguous
+ - occured -> occurred
+ - hidding -> hiding
+ - temporarilly -> temporarily
+ - immediatelly -> immediately
+ - sillyness -> silliness
+ - similiar -> similar
+ - porkuser -> pokeuser
+ - thats -> that
+ - alway -> always
+ - supercede -> supersede
+ - accomodate -> accommodate
+ - aquire -> acquire
+ - priveleged -> privileged
+ - priviliged -> privileged
+ - priviledges -> privileges
+ - privilige -> privilege
+ - recieve -> receive
+ - (p)refered -> (p)referred
+ - succesfully -> successfully
+ - successfuly -> successfully
+ - responsability -> responsibility
+ - wether -> whether
+ - wich -> which
+ - disasbleable -> disableable
+ - descriminant -> discriminant
+ - construcstor -> constructor
+ - underlaying -> underlying
+ - underyling -> underlying
+ - structureal -> structural
+ - appearences -> appearances
+ - terciarily -> tertiarily
+ - resgisters -> registers
+ - reacheable -> reachable
+ - likelyhood -> likelihood
+ - intepreter -> interpreter
+ - disassemly -> disassembly
+ - covnersion -> conversion
+ - conviently -> conveniently
+ - atttribute -> attribute
+ - struction -> struct
+ - resonable -> reasonable
+ - popupated -> populated
+ - namespaxe -> namespace
+ - intialize -> initialize
+ - identifer(s) -> identifier(s)
+ - expection -> exception
+ - exectuted -> executed
+ - dungerous -> dangerous
+ - dissapear -> disappear
+ - completly -> completely
+ - (inter)changable -> (inter)changeable
+ - beakpoint -> breakpoint
+ - automativ -> automatic
+ - alocating -> allocating
+ - agressive -> aggressive
+ - writting -> writing
+ - reguires -> requires
+ - registed -> registered
+ - recuding -> reducing
+ - opeartor -> operator
+ - ommitted -> omitted
+ - modifing -> modifying
+ - intances -> instances
+ - imbedded -> embedded
+ - gdbaarch -> gdbarch
+ - exection -> execution
+ - direcive -> directive
+ - demanged -> demangled
+ - decidely -> decidedly
+ - argments -> arguments
+ - agrument -> argument
+ - amespace -> namespace
+ - targtet -> target
+ - supress(ed) -> suppress(ed)
+ - startum -> stratum
+ - squence -> sequence
+ - prompty -> prompt
+ - overlow -> overflow
+ - memember -> member
+ - languge -> language
+ - geneate -> generate
+ - funcion -> function
+ - exising -> existing
+ - dinking -> syncing
+ - destroh -> destroy
+ - clenaed -> cleaned
+ - changep -> changedp (name of variable)
+ - arround -> around
+ - aproach -> approach
+ - whould -> would
+ - symobl -> symbol
+ - recuse -> recurse
+ - outter -> outer
+ - freeds -> frees
+ - contex -> context
+
+ Tested on x86_64-linux.
+
+ Reviewed-By: Tom Tromey <tom@tromey.com>
+
+2023-06-03 Tom de Vries <tdevries@suse.de>
+
+ [gdb/tdep] Fix typo in debug message
+ In microblaze_analyze_prologue in gdb/microblaze-tdep.c I came across:
+ ...
+ microblaze_debug ("got addi r1,r1,%d; contnuing\n", imm);
+ ...
+
+ Fix this by using "continuing".
+
+ Reviewed-By: Tom Tromey <tom@tromey.com>
+
+2023-06-03 Tom de Vries <tdevries@suse.de>
+
+ [gdb/python] Fix doc string of valpy_const_value
+ In gdb/python/py-value.c, in the value_object_methods array I noticed:
+ ...
+ { "const_value", valpy_const_value, METH_NOARGS,
+ "Return a 'const' qualied version of the same value." },
+ ...
+
+ Fix the qualied -> qualified typo.
+
+ Reviewed-By: Tom Tromey <tom@tromey.com>
+
+2023-06-03 Tom de Vries <tdevries@suse.de>
+
+ [gdb/guile] Fix doc string for value-optimized-out?
+ In gdb/guile/scm-value.c, I noticed in the value_functions array initializer:
+ ...
+ { "value-optimized-out?", 1, 0, 0,
+ as_a_scm_t_subr (gdbscm_value_optimized_out_p),
+ "\
+ Return #t if the value has been optimizd out." },
+ ...
+ There's a typo in the doc string.
+
+ Fix this by using "optimized".
+
+ Reviewed-By: Tom Tromey <tom@tromey.com>
+
+2023-06-03 Tom de Vries <tdevries@suse.de>
+
+ [gdb/tui] Fix help text of show tui tab-width
+ I noticed:
+ ...
+ (gdb) help show tui tab-width
+ Show the tab witdh, in characters, for the TUI.
+ This variable controls how many spaces are used to display a tab character.
+ ...
+ a typo: "witdh".
+
+ Fix this by using "width" instead.
+
+ Reviewed-By: Tom Tromey <tom@tromey.com>
+
+2023-06-03 Tom de Vries <tdevries@suse.de>
+
+ [gdb/cli] Fix help text of maint info target-sections
+ I noticed a typo:
+ ...
+ (gdb) help maint info target-sections
+ List GDB's internal section table.
+
+ Print the current targets section list. This is a sub-set of all
+ sections, from all objects currently loaded. Usually the ALLOC
+ sectoins.
+ ...
+
+ Fix this by using "sections".
+
+ Reviewed-By: Tom Tromey <tom@tromey.com>
+
+2023-06-03 Tom de Vries <tdevries@suse.de>
+
+ [gdb/cli] Fix help text of maint set ignore-prologue-end-flag
+ I noticed here:
+ ...
+ (gdb) help maint set ignore-prologue-end-flag
+ Set if the PROLOGUE-END flag is ignored.
+ The PROLOGUE-END flag from the line-table entries is used to place \
+ breakpoints past the prologue of functions. Disabeling its use use forces \
+ the use of prologue scanners.
+ ...
+ a typo in "Disabeling" and accidental word repetition "use use".
+
+ Fix by replacing with "Disabling" and "use".
+
+ Reviewed-By: Tom Tromey <tom@tromey.com>
+
+2023-06-03 Tom de Vries <tdevries@suse.de>
+
+ [gdb/compile] Fix typo in debug message
+ In compile_object_load in gdb/compile/compile-object-load.c I came across:
+ ...
+ "Connectiong ELF symbol \"%s\" to the .toc section (%s)\n",
+ ...
+
+ Fix this typo by using "Connecting" instead.
+
+ Reviewed-By: Tom Tromey <tom@tromey.com>
+
+2023-06-03 Tom de Vries <tdevries@suse.de>
+
+ [gdbserver] Fix typo in debug message
+ I noticed in emit_ops_insns in gdbserver/linux-aarch64-low.cc:
+ ...
+ threads_debug_printf ("Adding %d instrucions at %s",
+ ...
+
+ Fix the typo by using "instructions" instead.
+
+ Reviewed-By: Tom Tromey <tom@tromey.com>
+
+2023-06-03 Tom de Vries <tdevries@suse.de>
+
+ [gdb/ada] Fix argument name misspelling
+ Two functions use the argument name bounds_prefered_p.
+
+ This misspells "preferred".
+
+ Fix this by using bounds_preferred_p instead.
+
+ Tested on x86_64-linux.
+
+ Reviewed-By: Tom Tromey <tom@tromey.com>
+
+2023-06-03 Alan Modra <amodra@gmail.com>
+
+ Re: loongarch readelf support
+ Another segfault.
+
+ * readelf.c (target_specific_reloc_handling): Sanity check
+ loongarch reloc r_offset.
+
+2023-06-03 Alan Modra <amodra@gmail.com>
+
+ Re: More ecoff sanity checks
+ Yet another fuzzer fix.
+
+ * ecoff.c (ecoff_slurp_symbolic_header <FIX>): Zero counts when
+ associated pointer is zero.
+ (_bfd_ecoff_slurp_symbolic_info): Remove now unnecessary check.
+
+2023-06-03 GDB Administrator <gdbadmin@sourceware.org>
+
+ Automatic date update in version.in
+
+2023-06-02 Luis Machado <luis.machado@arm.com>
+
+ [AArch64] Fix architecture debug version constant thinkos
+ Caught this during emulator testing.
+
+ Fix the constants. They should be 0xa and 0xb as opposed to 0x10 and
+ 0x11. There was a thinko while defining them.
+
+ Obvious enough.
+
+ Tested on aarch64-linux Ubuntu 20.04/22.04.
+
+2023-06-02 Alan Modra <amodra@gmail.com>
+
+ Re: bfd_close and target free_cached_memory
+ _bfd_delete_bfd can be called early, before the target xvec is set up.
+
+ * opncls.c (_bfd_delete_bfd): Don't segfault on NULL xvec.
+
+2023-06-02 Alan Modra <amodra@gmail.com>
+
+ Re: More ecoff sanity checks
+ Another fix for fuzzed object files, exhibiting as a segfault in
+ nm.c filter_symbols when accessing a symbol name.
+
+ * ecoff.c (_bfd_ecoff_slurp_symbol_table): Sanity check
+ fdr_ptr->issBase, and tighten sym.iss check.
+
+2023-06-02 Alan Modra <amodra@gmail.com>
+
+ loongarch readelf support
+ This fixes two buffer overflows found by fuzzers.
+
+ * readelf.c (target_specific_reloc_handling): Sanity check
+ loongarch reloc symbol index. Don't apply reloc after errors.
+ Reduce translation work of "invalid symbol index" error message.
+
+2023-06-02 Alan Modra <amodra@gmail.com>
+
+ Minor objcopy optimisation for copy_relocations_in_section
+ * objcopy (copy_relocations_in_section): Don't read the relocs
+ for STRIP_ALL if keep_specific_htab is empty.
+
+2023-06-02 GDB Administrator <gdbadmin@sourceware.org>
+
+ Automatic date update in version.in
+
+2023-06-01 Indu Bhagat <indu.bhagat@oracle.com>
+
+ libsframe: avoid using magic number
+ Define a new constant for the maximum number of stack offsets handled in
+ libsframe, and use it. Note that the SFrame format does not define such
+ a constant (limit). This is an implmentation-defined constant in
+ libsframe.
+
+ include/
+ * sframe-api.h (MAX_NUM_STACK_OFFSETS): New definition.
+ libsframe/
+ * sframe.c (sframe_fre_sanity_check_p): Use it.
+
+2023-06-01 Indu Bhagat <indu.bhagat@oracle.com>
+
+ libsframe: minor fixups in flip_fre related functions
+ libsframe/
+ * sframe.c (flip_fre_start_address): Remove unnecessary type
+ cast. Use uint16_t instead of unsigned short.
+ (flip_fre_stack_offsets): Likewise.
+
+2023-06-01 Jim Wilson <jimw@sifive.com>
+
+ RISC-V: PR30449, Add lga assembler macro support.
+ Originally discussion, https://github.com/riscv/riscv-isa-manual/pull/539
+
+ Added new load address pseudo instruction which is always expanded to GOT
+ access, no matter the .option rvc is set or not.
+
+ gas/
+ PR 30449
+ * config/tc-riscv.c (macro): Add M_LGA support.
+ * testsuite/gas/riscv/la-variants.d: New.
+ * testsuite/gas/riscv/la-variants.s: New.
+ include/
+ PR 30449
+ * opcode/riscv.h (M_LGA): New.
+ opcodes/
+ PR 30449
+ * riscv-opc.c (riscv_opcodes): Add lga support.
+
+2023-06-01 Nelson Chu <nelson@rivosinc.com>
+
+ [PR ld/22263][PR ld/24676] RISC-V: Avoid spurious R_RISCV_NONE for TLS GD/IE.
+ For TLS GD/IE, add the same condition with the relocate_section in the
+ allocate_dynrelocs, to make sure we won't reserve redundant spaces
+ for dynamic relocations since the conservative estimatation.
+
+ After applying this patch, ld seems no longer generate the spurious
+ R_RISCV_NONE for pr22263-1 test, and the test in pr24676.
+
+ bfd/
+ PR ld/22263
+ PR ld/24676
+ * elfnn-riscv.c (RISCV_TLS_GD_IE_NEED_DYN_RELOC): New defined.
+ Set NEED_RELOC to true if TLS GD/IE needs dynamic relocations,
+ and INDX will be the dynamic index.
+ (allocate_dynrelocs): Don't reserve extra spaces in the rela.got
+ if RISCV_TLS_GD_IE_NEED_DYN_RELOC set need_reloc to false. This
+ condition needs to be same as relocate_section.
+ (relocate_section): Likewise, use the same condition as
+ allocate_dynrelocs.
+
+2023-06-01 Alan Modra <amodra@gmail.com>
+
+ Harden PowerPC64 OPD handling against fuzzers
+ PowerPC64 ELFv1 object files should have at most one .opd section, and
+ OPD handling in elf64-ppc.c makes use of this fact by caching some
+ .opd section info in the per-object bfd.tdata. This was done to avoid
+ another word in the target specific section data. Of course, fuzzers
+ don't respect the ABI, and even non-malicious users can accidentally
+ create multiple .opd sections. So it is better to avoid possible
+ buffer overflows and other confusion when OPD handling for a second
+ .opd section references data for the first .opd section, by keeping
+ the data per-section.
+
+ The patch also fixes a memory leak, and a corner case where I think we
+ could hit an assertion in opd_entry_value or read out of bounds in
+ ppc64_elf_branch_reloc doing a final link producing non-ppc64 output.
+ (It's a really rare corner case because not only would you need to be
+ linking ppc64 objects to non-ppc64 output, you'd also need a branch
+ reloc symbol to be defined in a .opd section of a non-ppc64 input.)
+
+ * elf64-ppc.c (is_ppc64_elf): Move earlier in file.
+ (ppc64_elf_branch_reloc): Check symbol bfd before accessing
+ ppc64 elf specific data structures.
+ (struct ppc64_elf_obj_tdata): Move opd union..
+ (struct _ppc64_elf_section_data): ..to here.
+ (ppc64_elf_before_check_relocs): Allow for opd sec_type
+ already set to sec_opd.
+ (ppc64_elf_check_relocs): Only set sec_type to sec_toc when
+ unset. Error for unexpected toc relocs.
+ (opd_entry_value): Return -1 when non-ppc64 rather than
+ asserting. Check and set sec_type too. Adjust for changed
+ location of contents and relocs.
+ (ppc64_elf_relocate_section): Adjust for changed location of
+ cached .opd relocs.
+ (ppc64_elf_free_cached_info): New function.
+ (bfd_elf64_bfd_free_cached_info): Define.
+
+2023-06-01 Alan Modra <amodra@gmail.com>
+
+ bfd_close and target free_cached_memory
+ bfd_free_cached_info is used in just one place in archive.c, which
+ means most times we reach bfd_close the function isn't called. On the
+ other hand, if bfd_free_cached_info is called we can't do much on the
+ bfd since it loses all its obj_alloc memory. This restricts what can
+ be done in a target _close_and_cleanup. In particular you can't look
+ at sections, which leads to duplication of code in target
+ close_and_cleanup and free_cached_info, eg. elfnn-aarch64.c.
+
+ * opncls.c (_bfd_delete_bfd): Call bfd_free_cached_info.
+ * elfnn-aarch64.c (elfNN_aarch64_close_and_cleanup): Delete.
+ (bfd_elfNN_close_and_cleanup): Don't define.
+ * som.c (som_bfd_free_cached_info): Don't call
+ _bfd_generic_close_and_cleanup here.
+ (som_close_and_cleanup): Define as _bfd_generic_close_and_cleanup.
+
+2023-06-01 Alan Modra <amodra@gmail.com>
+
+ section_by_target_index memory leak
+ The rs6000 backend can call coff_section_from_bfd_index from its
+ object_p function via coff_set_alignment_hook. If the object doesn't
+ match, or another target matches too, then the hash table needs to be
+ freed via a cleanup.
+
+ * coffgen.c (coff_object_cleanup): New function.
+ (coff_real_object_p): Return coff_object_cleanup, and call on
+ failure path. Move declaration to..
+ * libcoff-in.h: ..here.
+ (coff_object_cleanup): Declare.
+ * coff-stgo32.c (go32exe_cleanup): Call coff_object_cleanup.
+ (go32exe_check_format): Adjust assertion.
+ * libcoff.h: Regenerate.
+
+2023-06-01 Alan Modra <amodra@gmail.com>
+
+ Remove BFD_FAIL in cpu-sh.c
+ The assertions in cpu-sh.c can be triggered by passing bogus values
+ in disassemble_info.mach. This doesn't cause any bfd misbehaviour.
+
+ * cpu-sh.c (sh_get_arch_from_bfd_mach): Remove BFD_FAIL.
+ (sh_get_arch_up_from_bfd_mach): Likewise.
+
+2023-06-01 GDB Administrator <gdbadmin@sourceware.org>
+
+ Automatic date update in version.in
+
+2023-05-31 Vladimir Mezentsev <vladimir.mezentsev@oracle.com>
+
+ gprofng: Fix -Wsign-compare warning
+ gprofng/ChangeLog
+ 2023-05-25 Vladimir Mezentsev <vladimir.mezentsev@oracle.com>
+
+ PR gprofng/30490
+ * src/LoadObject.cc: Fix -Wsign-compare warning.
+
+2023-05-31 Vladimir Mezentsev <vladimir.mezentsev@oracle.com>
+
+ gprofng: 29470 The test suite should be made more flexible
+ I add two new targets (check-extra, check-install) for gprofng testing:
+ `make check` runs sanity testing for gprofng and takes ~30 secunds.
+ `make check-extra` runs all gprofng tests and takes ~20 minutus.
+ `make check-install` runs all gprofng tests and uses gprofng installation.
+
+ On aarch64, there are unwind problems in libgp-collector.so.
+ I set ACCT_FILTER to temporarily ignore problematic functions.
+
+ gprofng/ChangeLog
+ 2023-05-25 Vladimir Mezentsev <vladimir.mezentsev@oracle.com>
+
+ PR gprofng/29470
+ * Makefile.am: Add check-extra, check-install.
+ * Makefile.in: Rebuild
+ * testsuite/config/default.exp: Set the GPROFNG variable.
+ * testsuite/gprofng.display/display.exp: Updated the test list.
+ * testsuite/gprofng.display/jsynprog/Intface.java: Correct copyright.
+ * testsuite/gprofng.display/jsynprog/Launcher.java: Likewise.
+ * testsuite/gprofng.display/jsynprog/Makefile: Likewise.
+ * testsuite/gprofng.display/jsynprog/Routine.java: Likewise.
+ * testsuite/gprofng.display/jsynprog/Sub_Routine.java: Likewise.
+ * testsuite/gprofng.display/jsynprog/cloop.cc: Likewise.
+ * testsuite/gprofng.display/jsynprog/jsynprog.h: Likewise.
+ * testsuite/gprofng.display/jsynprog/jsynprog.java: Correct copyright.
+ Add the -j option to run the selected functions.
+ * testsuite/gprofng.display/synprog/check_results.pl:
+ Remove unused environment variable.
+ * testsuite/gprofng.display/synprog/synprog.c: Updated DEFAULT_COMMAND.
+ * testsuite/lib/Makefile.skel: Apply $(ACCT_FILTER).
+ * testsuite/lib/acct.pm: Ignore errors when $(ACCT_FILTER) is set.
+ * testsuite/lib/display-lib.exp: Add TARGET_FLAGS in make_args.
+
+2023-05-31 Tom Tromey <tromey@adacore.com>
+
+ Improve MI -dprintf-insert documentation
+ I found the documentation for -dprintf-insert a bit unclear. It
+ didn't mention the possibility of multiple arguments, and I also
+ noticed that it implied that the format parameter is optional, which
+ it is not.
+
+ While looking into this I also noticed a few comments in the
+ implementation that could also be improved.
+
+ Then, I noticed a repeated call to strlen in a loop condition, so I
+ fixed this up as well.
+
+ Reviewed-By: Eli Zaretskii <eliz@gnu.org>
+
+2023-05-31 Tom Tromey <tromey@adacore.com>
+
+ Pass correct name to @value in gdb.texinfo
+ I noticed a couple instance of this warning when rebuilding the gdb
+ info files:
+
+ warning: undefined flag: GDB
+
+ The problem is that the wrong argument was passed to @value. This
+ patch fixes the problem.
+
+2023-05-31 Tom de Vries <tdevries@suse.de>
+
+ [gdb/testsuite] Fix gdb.tui/wrap-line.exp with --disable-tui
+ When running the test-case gdb.tui/wrap-line.exp with a build configured with
+ --disable-tui, we run into:
+ ...
+ (gdb) PASS: gdb.tui/wrap-line.exp: width-hard-coded: set width 50
+ tui new-layout command-layout cmd 1^M
+ Undefined command: "tui". Try "help".^M
+ (gdb) ERROR: Undefined command "tui new-layout command-layout cmd 1".
+ ...
+
+ Fix this by guarding the command with allow_tui_tests.
+
+ Tested on x86_64-linux.
+
+2023-05-31 Tom de Vries <tdevries@suse.de>
+
+ [gdb/testsuite] Fix gdb.tui/pr30056.exp for native-extended-gdbserver
+ When running test-case gdb.tui/pr30056.exp with target board
+ native-extended-gdbserver, I run into:
+ ...
+ Quit^[[K^M^[[B(gdb) PASS: gdb.tui/pr30056.exp: Control-C
+ Remote debugging from host ::1, port 38810^M
+ ^M(failed reverse-i-search)`xyz': ^M(gdb) target extended-remote \
+ localhost:2346^[[7GWARNING: Timed out waiting for EOF in server after \
+ monitor exit
+ ...
+
+ This is due to the fact that ^C doesn't abort the reverse-i-search. This
+ appears to be due to a readline problem. A PR is open about this: PR
+ cli/30498.
+
+ Add a KFAIL for the PR, and ensure that the isearch is aborted by using ^G,
+ such that we have a responsive prompt to handle the "monitor exit" command
+ that native-extended-gdbserver issues.
+
+ Tested on x86_64-linux.
+
+2023-05-31 Tristan Gingold <tgingold@free.fr>
+
+ pe/coff - add support for base64 encoded long section names
+ PR 30444
+ * coffcode.h (coff_write_object_contents): Handle base64 encoding on PE. Also check for too large string table.
+ * coffgen.c (extract_long_section_name): New function extracted from ... (make_a_section_from_file): ... here. Add support for base64 long section names. (decode_base64): New function.
+
+2023-05-31 Nick Clifton <nickc@redhat.com>
+
+ Fix printf formating issues in elfxx-loongarch64.c
+
+2023-05-31 Felix Willgerodt <felix.willgerodt@intel.com>
+
+ python, btrace: Fix some small formatting issues.
+ Reviewed-By: Tom Tromey <tom@tromey.com>
+
+2023-05-31 Tom de Vries <tdevries@suse.de>
+
+ [gdb/tui] Fix fingerprint for cmd-only layout
+ I added a cmd-only layout:
+ ...
+ (gdb) tui new-layout cmd cmd 1
+ ...
+ and set it:
+ ...
+ (gdb) layout cmd
+ ...
+ which gave me the expect result: only the cmd window in the screen.
+
+ However, after going back to layout src:
+ ...
+ (gdb) layout src
+ ...
+ I got a source window with only one line in it, and the cmd window taking most
+ of the screen.
+
+ I traced this back to tui_set_layout, where for both the old and the new
+ layout the fingerprint of the cmd window in the layout is taken. If the
+ fingerprint is the same, an effort will be done to preserve the command
+ window size.
+
+ The fingerprint is "VC" for both the old (cmd) and new (src) layouts, which
+ explains the behaviour.
+
+ I think this is essentially a bug in the finger print calculation, and it
+ should be "C" for the cmd layout.
+
+ Fix this by not adding a V or H in the fingerprint if the list size is one.
+
+ Tested on x86_64-linux.
+
+ Reviewed-By: Tom Tromey <tom@tromey.com>
+
+2023-05-31 GDB Administrator <gdbadmin@sourceware.org>
+
+ Automatic date update in version.in
+
+2023-05-30 Andrew Burgess <aburgess@redhat.com>
+
+ gdb: add support for %V to printf command
+ This commit adds a new format for the printf and dprintf commands:
+ '%V'. This new format takes any GDB expression and formats it as a
+ string, just as GDB would for a 'print' command, e.g.:
+
+ (gdb) print a1
+ $a = {2, 4, 6, 8, 10, 12, 14, 16, 18, 20}
+ (gdb) printf "%V\n", a1
+ {2, 4, 6, 8, 10, 12, 14, 16, 18, 20}
+ (gdb)
+
+ It is also possible to pass the same options to %V as you might pass
+ to the print command, e.g.:
+
+ (gdb) print -elements 3 -- a1
+ $4 = {2, 4, 6...}
+ (gdb) printf "%V[-elements 3]\n", a1
+ {2, 4, 6...}
+ (gdb)
+
+ This new feature would effectively replace an existing feature of GDB,
+ the $_as_string builtin convenience function. However, the
+ $_as_string function has a few problems which this new feature solves:
+
+ 1. $_as_string doesn't currently work when the inferior is not
+ running, e.g:
+
+ (gdb) printf "%s", $_as_string(a1)
+ You can't do that without a process to debug.
+ (gdb)
+
+ The reason for this is that $_as_string returns a value object with
+ string type. When we try to print this we call value_as_address,
+ which ends up trying to push the string into the inferior's address
+ space.
+
+ Clearly we could solve this problem, the string data exists in GDB, so
+ there's no reason why we have to push it into the inferior, but this
+ is an existing problem that would need solving.
+
+ 2. $_as_string suffers from the fact that C degrades arrays to
+ pointers, e.g.:
+
+ (gdb) printf "%s\n", $_as_string(a1)
+ 0x404260 <a1>
+ (gdb)
+
+ The implementation of $_as_string is passed a gdb.Value object that is
+ a pointer, it doesn't understand that it's actually an array. Solving
+ this would be harder than issue #1 I think. The whole array to
+ pointer transformation is part of our expression evaluation. And in
+ most cases this is exactly what we want. It's not clear to me how
+ we'd (easily) tell GDB that we didn't want this reduction in _some_
+ cases. But I'm sure this is solvable if we really wanted to.
+
+ 3. $_as_string is a gdb.Function sub-class, and as such is passed
+ gdb.Value objects. There's no super convenient way to pass formatting
+ options to $_as_string. By this I mean that the new %V feature
+ supports print formatting options. Ideally, we might want to add this
+ feature to $_as_string, we might imagine it working something like:
+
+ (gdb) printf "%s\n", $_as_string(a1,
+ elements = 3,
+ array_indexes = True)
+
+ where the first item is the value to print, while the remaining
+ options are the print formatting options. However, this relies on
+ Python calling syntax, which isn't something that convenience
+ functions handle. We could possibly rely on strictly positional
+ arguments, like:
+
+ (gdb) printf "%s\n", $_as_string(a1, 3, 1)
+
+ But that's clearly terrible as there's far more print formatting
+ options, and if you needed to set the 9th option you'd need to fill in
+ all the previous options.
+
+ And right now, the only way to pass these options to a gdb.Function is
+ to have GDB first convert them all into gdb.Value objects, which is
+ really overkill for what we want.
+
+ The new %V format solves all these problems: the string is computed
+ and printed entirely on the GDB side, we are able to print arrays as
+ actual arrays rather than pointers, and we can pass named format
+ arguments.
+
+ Finally, the $_as_string is sold in the manual as allowing users to
+ print the string representation of flag enums, so given:
+
+ enum flags
+ {
+ FLAG_A = (1 << 0),
+ FLAG_B = (1 << 1),
+ FLAG_C = (1 << 1)
+ };
+
+ enum flags ff = FLAG_B;
+
+ We can:
+
+ (gdb) printf "%s\n", $_as_string(ff)
+ FLAG_B
+
+ This works just fine with %V too:
+
+ (gdb) printf "%V\n", ff
+ FLAG_B
+
+ So all functionality of $_as_string is replaced by %V. I'm not
+ proposing to remove $_as_string, there might be users currently
+ depending on it, but I am proposing that we don't push $_as_string in
+ the documentation.
+
+ As %V is a feature of printf, GDB's dprintf breakpoints naturally gain
+ access to this feature too. dprintf breakpoints can be operated in
+ three different styles 'gdb' (use GDB's printf), 'call' (call a
+ function in the inferior), or 'agent' (perform the dprintf on the
+ remote).
+
+ The use of '%V' will work just fine when dprintf-style is 'gdb'.
+
+ When dprintf-style is 'call' the format string and arguments are
+ passed to an inferior function (printf by default). In this case GDB
+ doesn't prevent use of '%V', but the documentation makes it clear that
+ support for '%V' will depend on the inferior function being called.
+
+ I chose this approach because the current implementation doesn't place
+ any restrictions on the format string when operating in 'call' style.
+ That is, the user might already be calling a function that supports
+ custom print format specifiers (maybe including '%V') so, I claim, it
+ would be wrong to block use of '%V' in this case. The documentation
+ does make it clear that users shouldn't expect this to "just work"
+ though.
+
+ When dprintf-style is 'agent' then GDB does no support the use of
+ '%V' (right now). This is handled at the point when GDB tries to
+ process the format string and send the dprintf command to the remote,
+ here's an example:
+
+ Reading symbols from /tmp/hello.x...
+ (gdb) dprintf call_me, "%V", a1
+ Dprintf 1 at 0x401152: file /tmp/hello.c, line 8.
+ (gdb) set sysroot /
+ (gdb) target remote | gdbserver --once - /tmp/hello.x
+ Remote debugging using | gdbserver --once - /tmp/hello.x
+ stdin/stdout redirected
+ Process /tmp/hello.x created; pid = 3088822
+ Remote debugging using stdio
+ Reading symbols from /lib64/ld-linux-x86-64.so.2...
+ (No debugging symbols found in /lib64/ld-linux-x86-64.so.2)
+ 0x00007ffff7fd3110 in _start () from /lib64/ld-linux-x86-64.so.2
+ (gdb) set dprintf-style agent
+ (gdb) c
+ Continuing.
+ Unrecognized format specifier 'V' in printf
+ Command aborted.
+ (gdb)
+
+ This is exactly how GDB would handle any other invalid format
+ specifier, for example:
+
+ Reading symbols from /tmp/hello.x...
+ (gdb) dprintf call_me, "%Q", a1
+ Dprintf 1 at 0x401152: file /tmp/hello.c, line 8.
+ (gdb) set sysroot /
+ (gdb) target remote | gdbserver --once - /tmp/hello.x
+ Remote debugging using | gdbserver --once - /tmp/hello.x
+ stdin/stdout redirected
+ Process /tmp/hello.x created; pid = 3089193
+ Remote debugging using stdio
+ Reading symbols from /lib64/ld-linux-x86-64.so.2...
+ (No debugging symbols found in /lib64/ld-linux-x86-64.so.2)
+ 0x00007ffff7fd3110 in _start () from /lib64/ld-linux-x86-64.so.2
+ (gdb) set dprintf-style agent
+ (gdb) c
+ Continuing.
+ Unrecognized format specifier 'Q' in printf
+ Command aborted.
+ (gdb)
+
+ The error message isn't the greatest, but improving that can be put
+ off for another day I hope.
+
+ Reviewed-By: Eli Zaretskii <eliz@gnu.org>
+ Acked-By: Simon Marchi <simon.marchi@efficios.com>
+
+2023-05-30 Simon Marchi <simon.marchi@efficios.com>
+
+ gdb: add interp::on_memory_changed method
+ Same idea as previous patches, but for memory_changed.
+
+ Change-Id: Ic19f20c24d8a6431d4a89c5625e8ef4898f76e82
+
+2023-05-30 Simon Marchi <simon.marchi@efficios.com>
+
+ gdb: add interp::on_param_changed method
+ Same idea as previous patches, but for command_param_changed.
+
+ Change-Id: I7c2196343423360da05f016f8ffa871c064092bb
+
+2023-05-30 Simon Marchi <simon.marchi@efficios.com>
+
+ gdb: add interp::on_breakpoint_modified method
+ Same idea as previous patches, but for breakpoint_modified.
+
+ Change-Id: I4f0a9edea912de431e32451d74224b2022a7c328
+
+2023-05-30 Simon Marchi <simon.marchi@efficios.com>
+
+ gdb: add interp::on_breakpoint_deleted method
+ Same idea as previous patches, but for breakpoint_deleted.
+
+ Change-Id: I59c231ce963491bb1eee1432ee1090138f09e19c
+
+2023-05-30 Simon Marchi <simon.marchi@efficios.com>
+
+ gdb: add interp::on_breakpoint_created method
+ Same idea as previous patches, but for breakpoint_created.
+
+ Change-Id: I614113c924edc243590018b8fb3bf69cb62215ef
+
+2023-05-30 Simon Marchi <simon.marchi@efficios.com>
+
+ gdb: add interp::on_tsv_modified method
+ Same idea as previous patches, but for tsv_modified.
+
+ Change-Id: I55454a2386d5450040b3a353909b26f389a43682
+
+2023-05-30 Simon Marchi <simon.marchi@efficios.com>
+
+ gdb: add interp::on_tsv_deleted method
+ Same idea as previous patches, but for tsv_deleted.
+
+ Change-Id: I71b0502b493da7b6e293bee02aeca98de83d4b75
+
+2023-05-30 Simon Marchi <simon.marchi@efficios.com>
+
+ gdb: add interp::on_tsv_created method
+ Same idea as previous patches, but for tsv_created.
+
+ Change-Id: I9c30ecfdbd78ca015d613f43a0c0aef6c7eb32b5
+
+2023-05-30 Simon Marchi <simon.marchi@efficios.com>
+
+ gdb: add interp::on_traceframe_changed method
+ Same idea as previous patches, but for traceframe_changed.
+
+ Change-Id: Ia473f07d70d57b30aca0094d0e0585d7e0d95637
+
+2023-05-30 Simon Marchi <simon.marchi@efficios.com>
+
+ gdb: add interp::on_about_to_proceed method
+ Same idea as previous patches, but for about_to_proceed. We only need
+ (and want, as far as the mi_interp implementation is concerned) to
+ notify the interpreter that caused the proceed.
+
+ Change-Id: Id259bca10dbc3d43d46607ff7b95243a9cbe2f89
+
+2023-05-30 Simon Marchi <simon.marchi@efficios.com>
+
+ gdb: add interp::on_solib_unloaded method
+ Same idea as previous patches, but for solib_unloaded.
+
+ Change-Id: Iad847de93f0b38b5c90679a173d3beeaed7af6c5
+
+2023-05-30 Simon Marchi <simon.marchi@efficios.com>
+
+ gdb: add interp::on_solib_loaded method
+ Same idea as previous patches, but for solib_loaded
+
+ Change-Id: I85edb0a4b377f4b2c39ffccf31cb75f38bae0f55
+
+2023-05-30 Simon Marchi <simon.marchi@efficios.com>
+
+ gdb: add interp::on_target_resumed method
+ Same idea as previous patches, but for target_resumed.
+
+ Change-Id: I66fa28d1d41a1f3c4fb0d6a470137d493eac3c8c
+
+2023-05-30 Simon Marchi <simon.marchi@efficios.com>
+
+ gdb: add interp::on_record_changed method
+ Same idea as previous patches, but for record_changed
+
+ Change-Id: I5eeeacd703af8401c315060514c94e8e6439cc40
+
+2023-05-30 Simon Marchi <simon.marchi@efficios.com>
+
+ gdb: add interp::on_inferior_removed method
+ Same idea as previous patches, but for inferior_removed.
+
+ Change-Id: I7971840bbbdcfabf77e2ded7584830c9dfdd10d0
+
+2023-05-30 Simon Marchi <simon.marchi@efficios.com>
+
+ gdb: add interp::on_inferior_disappeared method
+ Same idea as previous patches, but for inferior_disappeared.
+
+ For symmetry with on_inferior_appeared, I named this one
+ on_inferior_disappeared, despite the observer being called
+ inferior_exit. This is called when detaching an inferior, so I think
+ that calling it "disappeared" is a bit less misleading (the observer
+ should probably be renamed later).
+
+ Change-Id: I372101586bc9454997953c1e540a2a6685f53ef6
+
+2023-05-30 Simon Marchi <simon.marchi@efficios.com>
+
+ gdb: add interp::on_inferior_appeared method
+ Same idea as previous patches, but for inferior_appeared.
+
+ Change-Id: Ibe4feba34274549a886b1dfb5b3f8d59ae79e1b5
+
+2023-05-30 Simon Marchi <simon.marchi@efficios.com>
+
+ gdb: add interp::on_inferior_added method
+ Same idea as previous patches, but for inferior_added.
+
+ mi_interp::init avoided using mi_inferior_added, since, as the comment
+ used to say, it would notify all MI interpreters. Now, it's easy to
+ only notify the new interpreter, so it's possible to just call the
+ on_inferior_added method in mi_interp::init.
+
+ Change-Id: I0eddbd5367217d1c982516982089913019ef309f
+
+2023-05-30 Simon Marchi <simon.marchi@efficios.com>
+
+ gdb: add interp::on_thread_exited method
+ Same idea as previous patches, but for thread_exited.
+
+ Change-Id: I4be974cbe58cf635453fef503c2d77c82522cbd9
+
+2023-05-30 Simon Marchi <simon.marchi@efficios.com>
+
+ gdb: add interp::on_new_thread method
+ Same idea as previous patches, but for new_thread.
+
+ Change-Id: Ib70ae3421b736fd69d86c4e7c708bec349aa256c
+
+2023-05-30 Simon Marchi <simon.marchi@efficios.com>
+
+ gdb: add interp::on_user_selected_context_changed method
+ Same as previous patches, but for user_selected_context_changed.
+
+ Change-Id: I40de15be897671227d4bcf3e747f0fd595f0d5be
+
+2023-05-30 Simon Marchi <simon.marchi@efficios.com>
+
+ gdb: add interp::on_command_error method
+ Same idea as the previous patches, but for command_error.
+
+ Change-Id: If6098225dd72fad8be13b3023b35bc8bc48efb9d
+
+2023-05-30 Simon Marchi <simon.marchi@efficios.com>
+
+ gdb: add interp::on_sync_execution_done method
+ Same as previous patches, but for sync_execution_done. Except that
+ here, we only want to notify the interpreter that is executing the
+ command, not all interpreters.
+
+ Change-Id: I729c719447b5c5f29af65dbf6fed9132e2cd308b
+
+2023-05-30 Simon Marchi <simon.marchi@efficios.com>
+
+ gdb: add interp::on_no_history method
+ Same as previous patches, but for no_history.
+
+ Change-Id: I06930fe7cb4082138c6c5496c5118fe4951c10da
+
+2023-05-30 Simon Marchi <simon.marchi@efficios.com>
+
+ gdb: add interp::on_exited method
+ Same as previous patch, but for exited. Remove the exited observable,
+ since nothing uses it anymore, and we don't have anything coming that
+ will use it.
+
+ Change-Id: I358cbea0159af56752dfee7510d6a86191e722bb
+
+2023-05-30 Simon Marchi <simon.marchi@efficios.com>
+
+ gdb: add interp::on_signal_exited method
+ Same as previous patch, but for signal_exited. Remove the signal_exited
+ observable, since nothing uses it anymore, and we don't have anything
+ coming that will use it.
+
+ Change-Id: I0dca1eab76338bf27be755786e3dad3241698b10
+
+2023-05-30 Simon Marchi <simon.marchi@efficios.com>
+
+ gdb: add interp::on_normal_stop method
+ Same idea as the previous patch, but for the normal_stop event.
+
+ Change-Id: I4fc8ca8a51c63829dea390a2b6ce30b77f9fb863
+
+2023-05-30 Simon Marchi <simon.marchi@efficios.com>
+
+ gdb: add interp::on_signal_received method
+ Instead of having the interpreter code registering observers for the
+ signal_received observable, add a "signal_received" virtual method to
+ struct interp. Add a interps_notify_signal_received function that loops
+ over all UIs and calls the signal_received method on the interpreter.
+ Finally, add a notify_signal_received function that calls
+ interps_notify_signal_received and then notifies the observers. Replace
+ all existing notifications to the signal_received observers with calls
+ to notify_signal_received.
+
+ Before this patch, the CLI and MI code both register a signal_received
+ observer. These observer go over all UIs, and, for those that have a
+ interpreter of the right kind, print the stop notifiation.
+
+ After this patch, we have just one "loop over all UIs", inside
+ interps_notify_signal_received. Since the interp::on_signal_received
+ method gets called once for each interpreter, the implementations only
+ need to deal with the current interpreter (the "this" pointer).
+
+ The motivation for this patch comes from a future patch, that makes the
+ amdgpu code register an observer to print a warning after the CLI's
+ signal stop message. Since the amdgpu and the CLI code both use
+ observers, the order of the two messages is not stable, unless we define
+ the priority using the observer dependency system. However, the
+ approach of using virtual methods on the interpreters seems like a good
+ change anyway, I think it's more straightforward and simple to
+ understand than the current solution that uses observers. We are sure
+ that the amdgpu message gets printed after the CLI message, since
+ observers are notified after interpreters.
+
+ Keep the signal_received, even if nothing uses if, because we will be
+ using it in the upcoming amdgpu patch implementing the warning described
+ above.
+
+ Change-Id: I4d8614bb8f6e0717f4bfc2a59abded3702f23ac4
+
+2023-05-30 Tom de Vries <tdevries@suse.de>
+
+ [gdb] Mention --with/without-system-readline for --configuration
+ Simon reported that the new test-case gdb.tui/pr30056.exp fails with system
+ readline.
+
+ This is because the test-case requires a fix in readline that's present in our
+ in-repo copy of readline, but most likely not in any system readline yet.
+
+ Fix this by:
+ - mentioning --with-system-readline or --without-system-readline in the
+ configuration string.
+ - adding a new proc with_system_readline that makes this information available
+ in the testsuite.
+ - using this in test-case gdb.tui/pr30056.exp to declare it unsupported for
+ --with-system-readline.
+
+ Tested on x86_64-linux.
+
+ Reported-By: Simon Marchi <simon.marchi@efficios.com>
+ Approved-By: Simon Marchi <simon.marchi@efficios.com>
+
+2023-05-30 Nick Clifton <nickc@redhat.com>
+
+ Slight wording improvement for the -Ur documentation
+
+ Improve header information displayed with objdump -P for PE binaries.
+ * od-pe.c (targ_info): New array.
+ (get_target_specific_info): New function.
+ (decode_machine_number): Retire. Use get_target_specific_info instead.
+ (is_pe_object_magic): Likewise.
+ (dump_pe_file_header): Display more information.
+ Rework layout to be similar to that from 'objdump -p'.
+ Add code to handle larger than normnal AOUT headers.
+
+2023-05-30 mengqinggang <mengqinggang@loongson.cn>
+
+ LoongArch: ld: Add support for linker relaxation.
+ Add ld relax support and testsuits.
+
+ ld/ChangeLog:
+
+ * emultempl/loongarchelf.em: Regenerated.
+ * testsuite/ld-elf/compressed1d.d: Xfail loongarch*-*.
+ * testsuite/ld-elf/pr26936.d: Likewise.
+ * testsuite/ld-loongarch-elf/disas-jirl.d: Regenerated.
+ * testsuite/ld-loongarch-elf/disas-jirl-32.d: Regenerated.
+ * testsuite/ld-loongarch-elf/jmp_op.d: Likewise.
+ * testsuite/ld-loongarch-elf/macro_op.d: Likewise.
+ * testsuite/ld-loongarch-elf/macro_op_32.d: Likewise.
+ * testsuite/ld-loongarch-elf/relax-align.dd: New test.
+ * testsuite/ld-loongarch-elf/relax-align.s: New test.
+ * testsuite/ld-loongarch-elf/relax.exp: New test.
+ * testsuite/ld-loongarch-elf/relax.s: New test.
+ * testsuite/ld-loongarch-elf/uleb128.dd: New test.
+ * testsuite/ld-loongarch-elf/uleb128.s: New test.
+
+2023-05-30 mengqinggang <mengqinggang@loongson.cn>
+
+ LoongArch: gas: Add support for linker relaxation.
+ Add gas -mrelax and -mno-relax option.
+ Add R_LARCH_RELAX reloc for instrction if it can be relaxed.
+ ADD R_LARCH_ALIGN reloc for align pseudo instruction because relax.
+ Add ADD/SUB reloc pair for debug and exception data to calculate symbol
+ substraction because relax.
+
+ gas/ChangeLog:
+
+ * config/tc-loongarch.c:
+ (struct loongarch_cl_insn): New macro_id member.
+ (enum options): New OPTION_RELAX and OPTION_NO_RELAX.
+ (struct option): New mrelax and mno-relax.
+ (md_parse_option): Likewise.
+ (get_internal_label):
+ (loongarch_args_parser_can_match_arg_helper): Generate relax reloc.
+ (move_insn): Set fx_frag and fx_where if exist.
+ (append_fixp_and_insn): Call frag_wane and frag_new for linker relax
+ relocs.
+ (loongarch_assemble_INSNs): New loongarch_cl_insn pointer parameter.
+ (md_assemble): Fix function call.
+ (fix_reloc_insn): Likewise.
+ (md_apply_fix): Generate ADD/SUB reloc pair for debug and exception
+ data.
+ (loongarch_fix_adjustable): Delete.
+ (md_convert_frag): Generate new fix.
+ (loongarch_pre_output_hook): New function.
+ (loongarch_make_nops): Likewise.
+ (loongarch_frag_align_code): Likewise.
+ (loongarch_insert_uleb128_fixes): Likewise.
+ (loongarch_md_finish): Likewise.
+ * config/tc-loongarch.h
+ (md_allow_local_subtract): New macro define.
+ (loongarch_frag_align_code): New declare.
+ (md_do_align): Likewise.
+ (loongarch_fix_adjustable): Delete.
+ (tc_fix_adjustable): New macro define.
+ (TC_FORCE_RELOCATION_SUB_SAME): Likewise.
+ (TC_LINKRELAX_FIXUP): Likewise.
+ (TC_FORCE_RELOCATION_LOCAL): Likewise.
+ (DWARF2_USE_FIXED_ADVANCE_PC): Likewise.
+ (MD_APPLY_SYM_VALUE): Likewise.
+ (tc_symbol_new_hook): New extern.
+ (NOP_OPCODE): Delete.
+ (loongarch_pre_output_hook): New macro define.
+ (md_pre_output_hook): Likewise.
+ (md_finish): Likewise.
+ (loongarch_md_finish): New extern.
+ * testsuite/gas/all/align.d: Mark as unsupported on LoongArch.
+ * testsuite/gas/all/gas.exp: Xfail loongarch*-*.
+ * testsuite/gas/all/relax.d: Likewise.
+ * testsuite/gas/elf/dwarf-5-irp.d: Likewise.
+ * testsuite/gas/elf/dwarf-5-loc0.d: Likewise.
+ * testsuite/gas/elf/dwarf-5-macro-include.d: Likewise.
+ * testsuite/gas/elf/dwarf-5-macro.d: Likewise.
+ * testsuite/gas/elf/dwarf2-11.d: Likewise.
+ * testsuite/gas/elf/dwarf2-15.d: Likewise.
+ * testsuite/gas/elf/dwarf2-16.d: Likewise.
+ * testsuite/gas/elf/dwarf2-17.d: Likewise.
+ * testsuite/gas/elf/dwarf2-18.d: Likewise.
+ * testsuite/gas/elf/dwarf2-19.d: Likewise.
+ * testsuite/gas/elf/dwarf2-5.d: Likewise.
+ * testsuite/gas/elf/ehopt0.d: Likewise.
+ * testsuite/gas/elf/elf.exp: Likewise.
+ * testsuite/gas/elf/section11.d: Likewise.
+ * testsuite/gas/lns/lns.exp: Likewise.
+ * testsuite/gas/loongarch/jmp_op.d: Regenerated.
+ * testsuite/gas/loongarch/li.d: Likewise.
+ * testsuite/gas/loongarch/macro_op.d: Likewise.
+ * testsuite/gas/loongarch/macro_op_32.d: Likewise.
+ * testsuite/gas/loongarch/macro_op_large_abs.d: Likewise.
+ * testsuite/gas/loongarch/macro_op_large_pc.d: Likewise.
+ * testsuite/gas/loongarch/relax_align.d: New test.
+ * testsuite/gas/loongarch/relax_align.s: New test.
+ * testsuite/gas/loongarch/uleb128.d: New test.
+ * testsuite/gas/loongarch/uleb128.s: New test.
+
+2023-05-30 mengqinggang <mengqinggang@loongson.cn>
+
+ LoongArch: binutils: Add support for linker relaxation.
+ Add support for relocs related to relax to readelf.
+
+ binutils/ChangeLog:
+
+ * readelf.c (target_specific_reloc_handling): Handle ULEB128 reloc.
+ (is_32bit_inplace_add_reloc): Handle new reloc.
+ (is_32bit_inplace_sub_reloc): Likewise.
+ (is_64bit_inplace_add_reloc): Likewise.
+ (is_64bit_inplace_sub_reloc): Likewise.
+ (is_16bit_inplace_add_reloc): Likewise.
+ (is_16bit_inplace_sub_reloc): Likewise.
+ (is_8bit_inplace_add_reloc): Likewise.
+ (is_8bit_inplace_sub_reloc): Likewise.
+ (is_6bit_inplace_sub_reloc): Likewise.
+ (is_6bit_inplace_add_reloc): New function.
+ (apply_relocations): Handle new reloc.
+ * testsuite/binutils-all/readelf.exp: Add -mno-relax option
+ for LoongArch.
+
+2023-05-30 mengqinggang <mengqinggang@loongson.cn>
+
+ LoongArch: opcodes: Add support for linker relaxation.
+ Set gas default to enable relax.
+
+ opcodes/ChangeLog:
+
+ * loongarch-opc.c (struct loongarch_ASEs_option): New member relax
+ with the default value 1.
+
+2023-05-30 mengqinggang <mengqinggang@loongson.cn>
+
+ LoongArch: bfd: Add support for linker relaxation.
+ Add relax support and related relocs in bfd.
+
+ bfd/ChangeLog:
+
+ * bfd-in2.h: Add relocs related to relax.
+ * elfnn-loongarch.c (struct loongarch_elf_link_hash_table): New integer
+ pointer (data_segment_phase) to monitor the data segment phase.
+ (loongarch_elf_check_relocs): Swap B21/B26 reloc sequence.
+ (loongarch_elf_adjust_dynamic_symbol): Fix code format.
+ (loongarch_reloc_rewrite_imm_insn): Fix function call.
+ (perform_relocation): Handle new relocs related to relax.
+ (RELOCATE_CALC_PC32_HI20): Fix code format.
+ (RELOCATE_CALC_PC64_HI32): Likewise.
+ (loongarch_elf_relocate_section): Handle new relocs related to relax.
+ (loongarch_relax_delete_bytes): New function.
+ (loongarch_relax_pcala_addi): Likewise.
+ (loongarch_relax_pcala_ld): Likewise.
+ (bfd_elfNN_loongarch_set_data_segment_info): Likewise.
+ (loongarch_relax_align): Likewise.
+ (loongarch_elf_relax_section): Likewise.
+ (bfd_elfNN_bfd_relax_section): New macro define.
+ * elfxx-loongarch.c (reloc_bits): New bfd point parameter.
+ (reloc_bits_b16): Likewise.
+ (reloc_bits_b21): Likewise.
+ (reloc_bits_b26): Likewise.
+ (loongarch_adjust_reloc_bitsfield): Likewise.
+ (reloc_bits_pcrel20_s2): New function.
+ (loongarch_elf_add_sub_reloc): Likewise.
+ (loongarch_elf_add_sub_reloc_uleb128): Likewise.
+ (loongarch_write_unsigned_leb128): New function.
+ * elfxx-loongarch.h (loongarch_adjust_reloc_bitsfield): New bfd point
+ parameter.
+ (bfd_elf32_loongarch_set_data_segment_info): New declare.
+ (bfd_elf64_loongarch_set_data_segment_info): Likewise.
+ (loongarch_write_unsigned_leb128): Likewise.
+ * libbfd.h: Add relocs related to relax.
+ * reloc.c: Add relocs related to relax.
+
+2023-05-30 mengqinggang <mengqinggang@loongson.cn>
+
+ LoongArch: include: Add support for linker relaxation.
+ Add relocs and gas LARCH_opts.relax option.
+
+ include/ChangeLog:
+
+ * elf/loongarch.h: Add relocs.
+ * opcode/loongarch.h: Add LARCH_opts.relax and macro LARCH_NOP.
+
+2023-05-30 Nick Clifton <nickc@redhat.com>
+
+ Add support for an ARMMAGIC value of 0xa00 to the PE dumper.
+
+2023-05-30 Alan Modra <amodra@gmail.com>
+
+ arm-pe objdump -P
+ arm-pe looks to be a very old PE implementation, incompatible with
+ current arm-wince-pe. arm-pe has different relocations and uses
+ ARMMAGIC which has this comment: "I just made this up". Well, OK, I
+ don't know the history but it was probably before Microsoft "just made
+ up" their constants for ARM windows CE.
+
+ This patch supports objdump -P for arm-pe, and another magic constant
+ that may appear in object files. (I don't think binutils generates
+ files using ARMV7PEMAGIC aka IMAGE_FILE_MACHINE_ARMNT.)
+
+ * od-pe.c (is_pe_object_magic): Handle IMAGE_FILE_MACHINE_ARMNT
+ and ARMMAGIC.
+
+2023-05-30 Alan Modra <amodra@gmail.com>
+
+ Define IMAGE_FILE_MACHINE_ARMNT
+ Same value as ARMV7PEMAGIC.
+ https://learn.microsoft.com/en-us/windows/win32/sysinfo/image-file-machine-constants
+
+ * coff/pe.h (IMAGE_FILE_MACHINE_ARMNT): Define.
+
+2023-05-30 Alan Modra <amodra@gmail.com>
+
+ Don't define COFF_MAGIC
+ This macro was unused apart from aout/encap.h, which has been deleted.
+
+ * config/tc-arm.h (COFF_MAGIC): Don't define.
+ * config/tc-sh.h (COFF_MAGIC): Don't define.
+ * config/tc-z80.h (COFF_MAGIC): Don't define.
+ * config/tc-z8k.h (COFF_MAGIC): Don't define.
+
+2023-05-30 Alan Modra <amodra@gmail.com>
+
+ Delete include/aout/encap.h
+ This file is unused and as the header comment says, obsolete.
+
+ Regen binutils POTFILES.in
+ for od-pe.c
+
+2023-05-30 GDB Administrator <gdbadmin@sourceware.org>
+
+ Automatic date update in version.in
+
+2023-05-29 Tom de Vries <tdevries@suse.de>
+
+ [gdb/testsuite] Fix linefeed scrolling in tuiterm
+ I came across a bug in the implementation of line feed in tuiterm, and added a
+ unit test that exposes it.
+
+ Before sending the line feed we have:
+ ...
+ Screen Dump (size 8 columns x 4 rows, cursor at column 0, row 3):
+ 0 abcdefgh
+ 1 ijklmnop
+ 2 qrstuvwx
+ 3 yz01234
+ ...
+ and after it we have:
+ ...
+ Screen Dump (size 8 columns x 4 rows, cursor at column 0, row 1):
+ 0 ijklmnop
+ 1 qrstuvwx
+ 2 yz01234
+ 3 yz01234
+ ...
+
+ Note how the cursor started at row 3 and after the line feed ended up at
+ row 1, while it should have stayed in row 3.
+
+ Fix this by moving "incr _cur_row -1" one level up in the loop nest in
+ proc _ctl_0x0a.
+
+ Tested on x86_64-linux.
+
+2023-05-29 Simon Marchi <simon.marchi@efficios.com>
+
+ gdb/mi: fix ^running record with multiple MI interpreters
+ I stumbled on the mi_proceeded and running_result_record_printed
+ globals, which are shared by all MI interpreter instances (it's unlikely
+ that people use multiple MI interpreter instances, but it's possible).
+ After poking at it, I found this bug:
+
+ 1. Start GDB in MI mode
+ 2. Add a second MI interpreter with the new-ui command
+ 3. Use -exec-run on the second interpreter
+
+ This is the output I get on the first interpreter:
+
+ =thread-group-added,id="i1"
+ ~"Reading symbols from a.out...\n"
+ ~"New UI allocated\n"
+ (gdb)
+ =thread-group-started,id="i1",pid="94718"
+ =thread-created,id="1",group-id="i1"
+ ^running
+ *running,thread-id="all"
+
+ And this is the output I get on the second intepreter:
+
+ =thread-group-added,id="i1"
+ (gdb)
+ -exec-run
+ =thread-group-started,id="i1",pid="94718"
+ =thread-created,id="1",group-id="i1"
+ *running,thread-id="all"
+
+ The problem here is that the `^running` reply to the -exec-run command
+ is printed on the wrong UI. It is printed on the first one, it should
+ be printed on the second (the one on which we sent the -exec-run).
+
+ What happens under the hood is that captured_mi_execute_command, while
+ executing a command for the second intepreter, clears the
+ running_result_record_printed and mi_proceeded globals.
+ mi_about_to_proceed then sets mi_proceeded. Then, mi_on_resume_1 gets
+ called for the first intepreter first. Since the
+
+ !running_result_record_printed && mi_proceeded
+
+ condition is true, it prints a ^running, and sets
+ running_result_record_printed. When mi_on_resume_1 gets called for the
+ second interpreter, running_result_record_printed is already set, so
+ ^running is not printed there.
+
+ It took me a while to understand the relationship between these two
+ variables. I think that in the end, this is what we want to track:
+
+ 1. When executing an MI command, take note if that command causes a
+ "proceed". This is done in mi_about_to_proceed.
+ 2. In mi_on_resume_1, if the command indeed caused a "proceed", we want
+ to output a ^running record. And we want to remember that we did,
+ because...
+ 3. Back in captured_mi_execute_command, if we did not output a
+ ^running, we want to output a ^done.
+
+ Moving those two variables to the mi_interp struture appears to fix it.
+ Only for the interpreter doing the -exec-run command does the
+ running_result_record_printed flag get cleared, and therefore only or
+ that one does the ^running record get printed.
+
+ Add a new test for this, that does pretty much what the reproducer above
+ shows. Without the fix, the test fails because
+ mi_send_resuming_command_raw never sees the ^running record.
+
+ Change-Id: I63ea30e6cb61a8e1dd5ef03377e6003381a9209b
+ Tested-By: Alexandra Petlanova Hajkova <ahajkova@redhat.com>
+
+2023-05-29 GDB Administrator <gdbadmin@sourceware.org>
+
+ Automatic date update in version.in
+
+2023-05-28 Tom de Vries <tdevries@suse.de>
+
+ [readline] Fix double free in _rl_scxt_dispose
+ Consider the following scenario. We start gdb in TUI mode:
+ ...
+ $ gdb -q -tui
+ ...
+ and type ^R which gives us the reverse-isearch prompt in the cmd window:
+ ...
+ (reverse-i-search)`':
+ ...
+ and then type "foo", right-arrow-key, and ^C.
+
+ In TUI mode, gdb uses a custom rl_getc_function tui_getc.
+
+ When pressing the right-arrow-key, tui_getc:
+ - attempts to scroll the TUI src window, without any effect, and
+ - returns 0.
+
+ The intention of returning 0 is mentioned here in tui_dispatch_ctrl_char:
+ ...
+ /* We intercepted the control character, so return 0 (which readline
+ will interpret as a no-op). */
+ return 0;
+ ...
+
+ However, after this 0 is returned by the rl_read_key () call in
+ _rl_search_getchar, _rl_read_mbstring is called, which incorrectly interprets
+ 0 as the first part of an utf-8 multibyte char, and tries to read the next
+ char.
+
+ In this state, the ^C takes effect and we run into a double free because
+ _rl_isearch_cleanup is called twice.
+
+ Both these issues need fixing independently, though after fixing the first we
+ no longer trigger the second.
+
+ The first issue is caused by the subtle difference between:
+ - a char array containing 0 chars, which is zero-terminated, and
+ - a char array containing 1 char, which is zero.
+
+ In mbrtowc terms, this is the difference between:
+ ...
+ mbrtowc (&wc, "", 0, &ps);
+ ...
+ which returns -2, and:
+ ...
+ mbrtowc (&wc, "", 1, &ps);
+ ...
+ which returns 0.
+
+ Note that _rl_read_mbstring calls _rl_get_char_len without passing it an
+ explicit length parameter, and consequently it cannot distinguish between the
+ two, and defaults to the "0 chars" choice.
+
+ Note that the same problem doesn't exist in _rl_read_mbchar.
+
+ Fix this by defaulting to the "1 char" choice in _rl_get_char_len:
+ ...
+ - if (_rl_utf8locale && l > 0 && UTF8_SINGLEBYTE(*src))
+ + if (_rl_utf8locale && l >= 0 && UTF8_SINGLEBYTE(*src))
+ ...
+
+ The second problem happens when the call to _rl_search_getchar in
+ _rl_isearch_callback returns. At that point _rl_isearch_cleanup has already
+ been called from the signal handler, but we proceed regardless, using a cxt
+ pointer that has been freed.
+
+ Fix this by checking for "RL_ISSTATE (RL_STATE_ISEARCH)" after the call to
+ _rl_search_getchar:
+ ...
+ c = _rl_search_getchar (cxt);
+ + if (!RL_ISSTATE (RL_STATE_ISEARCH))
+ + return 1;
+ ...
+
+ Tested on x86_64-linux.
+
+ Approved-By: Chet Ramey <chet.ramey@case.edu>
+
+ PR tui/30056
+ Bug: https://sourceware.org/bugzilla/show_bug.cgi?id=30056
+
+2023-05-28 GDB Administrator <gdbadmin@sourceware.org>
+
+ Automatic date update in version.in
+
+2023-05-27 Nelson Chu <nelson@nelson.ba.rivosinc.com>
+
+ [PR ld/22263][PR ld/25694] RISC-V: Avoid dynamic TLS relocs in PIE.
+ Lots of targets already fixed the TEXTREL problem for TLS in PIE.
+
+ * For PR ld/25694,
+ In the check_reloc, refer to spare and loongarch, they don't need to reserve
+ any local dynamic reloc for TLS LE in pie/pde, and similar to other targets.
+ So it seems like riscv was too conservative to estimate the TLS LE before.
+ Just break and don't goto static_reloc for TLS LE in pie/pde can fix the
+ TEXTREL problem.
+
+ * For PR ld/22263,
+ The risc-v code for TLS GD/IE in the relocate_section seems same as MIPS port.
+ So similar to MIPS, pr22570, commits 9143e72c6d4d and 1cb83cac9a89, it seems
+ also the right way to do the same thing for risc-v.
+
+ On risc-v, fixes
+ FAIL: Build pr22263-1
+
+ RISC-V haven't supported the TLS transitions, so will need the same fix (use
+ bfd_link_dll) in the future.
+
+ bfd/
+ PR ld/22263
+ PR ld/25694
+ * elfnn-riscv.c (riscv_elf_check_relocs): Replace bfd_link_pic with
+ bfd_link_dll for TLS IE. Don't need to reserve the local dynamic
+ relocation for TLS LE in pie/pde, and report error in pic just like
+ before.
+ (riscv_elf_relocate_section): For TLS GD/IE, use bfd_link_dll rather
+ than !bfd_link_pic in determining the dynamic symbol index. Avoid
+ the index of -1.
+
+2023-05-27 GDB Administrator <gdbadmin@sourceware.org>
+
+ Automatic date update in version.in
+
+2023-05-26 Nick Clifton <nickc@redhat.com>
+
+ Enhance objdump's --private option so that it can display the contents of PE format files.
+ * od-pe.c: New file: Dumps fields in PE format headers.
+ * configure.ac (od_vectors): Add objdump_private_desc_pe for PE format targets. (od_files): Add od-pe for PE format targets.
+ * configure: Regenerate.
+ * Makefile.am (CFILES): Add od-pe.c (EXTRA_objdump_SOURCE): Likewise.
+ * Makefile.in: Generate.
+ * NEWS: Mention the new feature.
+ * doc/binutils.texi: Document the new support.
+ * objdump.c (wide_output): Change from local to global.
+ * objdump.h (wide_output): Prototype. (objdump_private_desc_pe): Prototype.
+ * testsuite/binutils-all/objdump.exp: Add a test of the new feature.
+
+2023-05-26 Andreas Schwab <schwab@linux-m68k.org>
+
+ Remove duplicate definition
+ * coff/pe.h (IMAGE_FILE_MACHINE_AMD64): Remove duplicate
+ definition. Alphabetize.
+
+2023-05-26 Jan Beulich <jbeulich@suse.com>
+
+ x86: fix disassembler build after 1a3b4f90bc5f
+ In commit 1a3b4f90bc5f ("x86: convert two pointers to (indexing)
+ integers") I neglected the fact that compilers may warn about comparing
+ ptrdiff_t (signed long) with size_t (unsigned long) values. Since just
+ before we've checked that the value is positive, simply add a cast
+ (despite my dislike for casts).
+
+2023-05-26 Tom de Vries <tdevries@suse.de>
+
+ [gdb/testsuite] Add test-case gdb.tui/color-prompt.exp
+ Add a test-case that sets a prompt with color in TUI.
+
+ The line containing the prompt is shown by get_line_with_attrs as follows:
+ ...
+ <fg:31>(gdb) <fg:default>
+ ...
+
+ The 31 means red, but only for foreground colors, for background colors 41
+ means red.
+
+ Make this more readable by using color names for both foreground and
+ background, such that we have instead:
+ ....
+ <fg:red>(gdb) <fg:default>
+ ...
+
+ Tested on x86_64-linux.
+
+2023-05-26 Tom de Vries <tdevries@suse.de>
+
+ [gdb/testsuite] Add invisible and blinking attributes in tuiterm
+ I noticed curses using the invisible and blinking attributes.
+
+ Add these in tuiterm.
+
+ Tested on x86_64-linux.
+
+2023-05-26 Tom de Vries <tdevries@suse.de>
+
+ [gdb/testsuite] Fix reverse attribute in tuiterm
+ I noticed in proc Term::_csi_m arguments that while parameters 7 and 27 are
+ supposed to set the reverse attribute to 1 and 0, in fact it's set to 1 in
+ both cases:
+ ...
+ 7 {
+ set _attrs(reverse) 1
+ }
+ ...
+ 27 {
+ set _attrs(reverse) 1
+ }
+ ...
+
+ Fix this and add a regression test in gdb.tui/tuiterm.exp.
+
+ Tested on x86_64-linux.
+
+2023-05-26 Jan Beulich <jbeulich@suse.com>
+
+ iamcu: suppress tests which can't possibly work
+ With neither --32 nor --64 passed to gas, advanced features like AVX
+ aren't available without explicitly enabling them.
+
+ x86-64: improve gas diagnostic when no 32-bit target is configured
+ Make this similar to --64 and --x32: Check whether a suitable target
+ exists.
+
+ x86-64: conditionalize tests using --32
+ Using this option doesn't really work when no support for any 32-bit
+ target was configured in (as is the case for at least cloudabi and
+ rdos).
+
+ x86: split gas testsuite .exp file
+ The set of 32-bit-only and 64-bit-only tests has grown quite large. In
+ particular when one's after only the results for the 64-bit set, having
+ them live in a separate .exp file is easier / faster.
+
+ x86: convert two pointers to (indexing) integers
+ This in particular reduces the number of pointers to non-const that we
+ have (and that could potentially be used for undue modification of
+ state). As a result, fetch_code()'s 2nd parameter can then also become
+ pointer-to-const.
+
+2023-05-26 Jan Beulich <jbeulich@suse.com>
+
+ x86: disassembling over-long insns
+ The present way of dealing with them - misusing MAX_MNEM_SIZE, which has
+ nothing to do with insn length - leads to inconsistent results. Since we
+ allow for up to MAX_CODE_LENGTH - 1 prefix bytes (which then could be
+ followed by another MAX_CODE_LENGTH "normal" insn bytes until we're done
+ decoding), size the_buffer[] accordingly.
+
+ Move struct dis_private down to be able to use MAX_CODE_LENGTH without
+ moving its #define. While doing this also alter the order to have the
+ potentially large array last.
+
+2023-05-26 Jan Beulich <jbeulich@suse.com>
+
+ x86: use fixed-width type for codep and friends
+ This first of all removes a dependency on bfd_byte and unsigned char
+ being the same types. It further eliminates the need to mask by 0xff
+ when fetching values (which wasn't done fully consistently anyway),
+ improving code legibility.
+
+ While there, where possible add const.
+
+2023-05-26 Jan Beulich <jbeulich@suse.com>
+
+ x86: figure braces aren't really part of mnemonics
+ Instead they're separators for pseudo-prefixes. Don't insert them in
+ mnemonic_chars[], handling them explicitly in parse_insn() instead. Note
+ that this eliminates the need for another separator after a pseudo-
+ prefix. While maybe not overly interesting for a following real
+ mnemonic, I view this as quite desirable between multiple successive
+ pseudo-prefixes (bringing things in line with the other use of figure
+ braces in AVX512's zeroing-masking).
+
+ Drop the unused is_mnemonic_char() at this occasion.
+
+2023-05-26 Jan Beulich <jbeulich@suse.com>
+
+ x86: de-duplicate operand_special_chars[] wrt extra_symbol_chars[]
+ Having to add characters to both arrays can easily lead to oversights.
+ Consuming extra_symbol_chars[] when populating operand_chars[] also
+ allows to drop two special cases in md_begin().
+
+ Constify operand_special_chars[] at this occasion.
+
+2023-05-26 Indu Bhagat <indu.bhagat@oracle.com>
+
+ sframe/doc: minor improvements for readability
+ libsframe/
+ * sframe-spec.texi: Cosmetic fixes.
+
+2023-05-26 Indu Bhagat <indu.bhagat@oracle.com>
+
+ libsframe: revisit sframe_find_fre API
+ Inspite of implementing a rather simple functionality, this function was
+ relatively difficult to follow, and maintain. Some changes are done now
+ to address that - refactor the function and use better names to make it
+ more readable.
+
+ The changes to the implementation do not cause any change in the
+ contract of the API.
+
+ libsframe/
+ * sframe.c (sframe_fre_get_end_ip_offset): to here...
+ (sframe_find_fre): Refactor some bits from...
+
+2023-05-26 Indu Bhagat <indu.bhagat@oracle.com>
+
+ libsframe: use const char * consistently for immutable FRE buffers
+ libsframe/
+ * sframe.c (sframe_decode_fre): Use const char * datatype when
+ handling buffer containing the FREs.
+ (sframe_fre_get_end_ip_offset): Likewise.
+ (sframe_find_fre): Likewise.
+ (sframe_decoder_get_fre): Likewise.
+
+ libsframe: use uint8_t data type for FRE info related stubs
+ libsframe/
+ * sframe.c: Use uint8_t for FRE offset count and FRE offset
+ size. Use uint8_t for FRE info word as well.
+
+2023-05-26 Alan Modra <amodra@gmail.com>
+
+ PR22263 ld test
+ A number of targets that I test regularly fail the "Build pr22263-1"
+ test for various reasons.
+
+ arm-linux-gnueabi: "undefined reference to `__aeabi_read_tp'"
+ ia64-linux-gnu: "Explicit stops are ignored in auto mode"
+ m68k-linux-gnu: "undefined reference to `__m68k_read_tp'"
+ microblaze-linux-gnu: "undefined reference to `__tls_get_addr'"
+ nios2-linux-gnu, s390-linux-gnu and sh4-linux-gnu have a tprel reloc in .got
+ riscv64-linux-gnu has a dynamic relocation in text
+
+ So only riscv really fails the pr. The rest fail due to test issues
+ or lack of a linker optimisation. Lack of an optimisation isn't
+ really a fail, but it's worth keeping the test to ensure those
+ optimisations don't regress. The xfail targets may not be an
+ exhaustive list. This just tidies test results for those for which I
+ have cross compilers installed.
+
+ PR 22263
+ * testsuite/ld-elf/tls.exp: Split pr22263 test into two parts,
+ one to check for -z text errors, the other to check tprel
+ linker optimisation. Supply needed symbols and assembler flags.
+ xfail the linker optimisation on targets known to fail.
+
+2023-05-26 Tom Tromey <tom@tromey.com>
+
+ Make MI commands const-correct
+ I've had this patch for a while now and figured I'd update it and send
+ it. It changes MI commands to use a "const char * const" for their
+ argv parameter.
+
+ Regression tested on x86-64 Fedora 36.
+
+ Acked-By: Simon Marchi <simon.marchi@efficios.com>
+
+2023-05-26 GDB Administrator <gdbadmin@sourceware.org>
+
+ Automatic date update in version.in
+
+2023-05-25 Ciaran Woodward <ciaranwoodward@xmos.com>
+
+ Fix scoped_value_mark not working with empty value chain
+ The scoped_value_mark helper class was setting its internal
+ mark value to NULL to indicate that the value chain had already
+ been freed to mark.
+
+ However, value_mark() also returns NULL if the value chain is
+ empty at the time of call.
+
+ This lead to the situation that if the value chain was empty
+ at the time the scoped_value_mark was created, the class
+ would not correctly clean up the state when it was destroyed,
+ because it believed it had already been freed.
+
+ I noticed this because I was setting a watchpoint very early
+ in my debug session, and it was becoming a software watchpoint
+ rather than hardware. Running any command that called evaluate()
+ beforehand (such as 'x 0') would mean that a hardware watchpoint
+ was correctly used. After some careful examination of the
+ differences in execution, I noticed that values were being freed
+ later in the 'bad case', which lead me to notice the issue with
+ scoped_value_mark.
+
+2023-05-25 Simon Marchi <simon.marchi@efficios.com>
+
+ gdb: remove breakpoint_pointer_iterator
+ Remove the breakpoint_pointer_iterator layer. Adjust all users of
+ all_breakpoints and all_tracepoints to use references instead of
+ pointers.
+
+ Change-Id: I376826f812117cee1e6b199c384a10376973af5d
+ Reviewed-By: Andrew Burgess <aburgess@redhat.com>
+
+2023-05-25 Simon Marchi <simon.marchi@efficios.com>
+
+ gdbsupport: make filtered_iterator::operator* return the same thing as underlying iterator
+ This is the same idea as the previous patch, but for filtered_iterator.
+ Without this patch, I would see this when applying the patch that
+ removes reference_to_pointer_iterator from breakpoint_range:
+
+ CXX breakpoint.o
+ /home/smarchi/src/binutils-gdb/gdb/breakpoint.c: In function ‘void download_tracepoint_locations()’:
+ /home/smarchi/src/binutils-gdb/gdb/breakpoint.c:11007:41: error: cannot allocate an object of abstract type ‘breakpoint’
+ 11007 | for (breakpoint &b : all_tracepoints ())
+ | ^
+ In file included from /home/smarchi/src/binutils-gdb/gdb/gdbthread.h:26,
+ from /home/smarchi/src/binutils-gdb/gdb/infrun.h:21,
+ from /home/smarchi/src/binutils-gdb/gdb/gdbarch.h:28,
+ from /home/smarchi/src/binutils-gdb/gdb/arch-utils.h:23,
+ from /home/smarchi/src/binutils-gdb/gdb/breakpoint.c:21:
+ /home/smarchi/src/binutils-gdb/gdb/breakpoint.h:619:8: note: because the following virtual functions are pure within ‘breakpoint’:
+ 619 | struct breakpoint : public intrusive_list_node<breakpoint>
+ | ^~~~~~~~~~
+ /home/smarchi/src/binutils-gdb/gdb/breakpoint.c:250:1: note: ‘virtual breakpoint::~breakpoint()’
+ 250 | breakpoint::~breakpoint ()
+ | ^~~~~~~~~~
+
+ Change-Id: I05285ff27d21cb0ab80cba392ec4e959167e3cd7
+ Reviewed-By: Andrew Burgess <aburgess@redhat.com>
+
+2023-05-25 Simon Marchi <simon.marchi@efficios.com>
+
+ gdbsupport: make basic_safe_iterator::operator* return the same thing as underlying iterator
+ Using the following patch that removes the reference_to_pointer_iterator
+ from breakpoint_range, I would get:
+
+ CXX breakpoint.o
+ /home/smarchi/src/binutils-gdb/gdb/breakpoint.c: In function ‘void breakpoint_program_space_exit(program_space*)’:
+ /home/smarchi/src/binutils-gdb/gdb/breakpoint.c:3030:46: error: cannot allocate an object of abstract type ‘breakpoint’
+ 3030 | for (breakpoint &b : all_breakpoints_safe ())
+ | ^
+ In file included from /home/smarchi/src/binutils-gdb/gdb/gdbthread.h:26,
+ from /home/smarchi/src/binutils-gdb/gdb/infrun.h:21,
+ from /home/smarchi/src/binutils-gdb/gdb/gdbarch.h:28,
+ from /home/smarchi/src/binutils-gdb/gdb/arch-utils.h:23,
+ from /home/smarchi/src/binutils-gdb/gdb/breakpoint.c:21:
+ /home/smarchi/src/binutils-gdb/gdb/breakpoint.h:619:8: note: because the following virtual functions are pure within ‘breakpoint’:
+ 619 | struct breakpoint : public intrusive_list_node<breakpoint>
+ | ^~~~~~~~~~
+ /home/smarchi/src/binutils-gdb/gdb/breakpoint.c:250:1: note: ‘virtual breakpoint::~breakpoint()’
+ 250 | breakpoint::~breakpoint ()
+ | ^~~~~~~~~~
+
+ This is because the operator* method of the basic_safe_iterator iterator
+ wrapper returns a value_type. So, even if the method of the underlying
+ iterator (breakpoint_iterator, an intrusive_list iterator) returns a
+ `breakpoint &`, the method of the wrapper returns a `breakpoint`.
+
+ I think it would make sense for iterator wrappers such as
+ basic_safe_iterator to return the exact same thing as the iterator they
+ wrap. At least, it fixes my problem.
+
+ Change-Id: Ibbcd390ac03d2fb6ae4854923750c8d7c3c04e8a
+ Reviewed-By: Andrew Burgess <aburgess@redhat.com>
+
+2023-05-25 Simon Marchi <simon.marchi@efficios.com>
+
+ gdb: link breakpoints with intrusive_list
+ Change-Id: I043d8d6f3dd864d80d5088f6ffc2c098337249ea
+ Reviewed-By: Andrew Burgess <aburgess@redhat.com>
+
+2023-05-25 Simon Marchi <simon.marchi@efficios.com>
+
+ gdb: remove bp_location_pointer_iterator
+ Remove the bp_location_pointer_iterator layer. Adjust all users of
+ breakpoint::locations to use references instead of pointers.
+
+ Change-Id: Iceed34f5e0f5790a9cf44736aa658be6d1ba1afa
+ Reviewed-By: Andrew Burgess <aburgess@redhat.com>
+
+2023-05-25 Simon Marchi <simon.marchi@efficios.com>
+
+ gdb: use intrusive_list for breakpoint locations
+ Replace the hand-maintained linked lists of breakpoint locations with
+ and intrusive list.
+
+ - Remove breakpoint::loc, add breakpoint::m_locations.
+
+ - Add methods for the various manipulations that need to be done on the
+ location list, while maintaining reasonably good encapsulation.
+
+ - bp_location currently has a default constructor because of one use
+ in hoist_existing_locations. hoist_existing_locations now returns a
+ bp_location_list, and doesn't need the default-constructor
+ bp_location anymore, so remove the bp_location default constructor.
+
+ - I needed to add a call to clear_locations in delete_breakpoint to
+ avoid a use-after-free.
+
+ - Add a breakpoint::last_loc method, for use in
+ set_breakpoint_condition.
+
+ bp_location_range uses reference_to_pointer_iterator, so that all
+ existing callers of breakpoint::locations don't need to change right
+ now. It will be removed in the next patch.
+
+ The rest of the changes are to adapt the call sites to use the new
+ methods, of breakpoint::locations, rather than breakpoint::loc directly.
+
+ Change-Id: I25f7ee3d66a4e914a0540589ac414b3b820b6e70
+ Reviewed-By: Andrew Burgess <aburgess@redhat.com>
+
+2023-05-25 Simon Marchi <simon.marchi@efficios.com>
+
+ gdbsupport: add missing increment/decrement operators to reference_to_pointer_iterator
+ Using the following patch, I would get this build failure:
+
+ CXX breakpoint.o
+ In file included from /usr/include/c++/13.1.1/bits/stl_algobase.h:66,
+ from /usr/include/c++/13.1.1/bits/hashtable_policy.h:36,
+ from /usr/include/c++/13.1.1/bits/hashtable.h:35,
+ from /usr/include/c++/13.1.1/bits/unordered_map.h:33,
+ from /usr/include/c++/13.1.1/unordered_map:41,
+ from /usr/include/c++/13.1.1/functional:63,
+ from /home/smarchi/src/binutils-gdb/gdb/../gdbsupport/ptid.h:35,
+ from /home/smarchi/src/binutils-gdb/gdb/../gdbsupport/common-defs.h:206,
+ from /home/smarchi/src/binutils-gdb/gdb/defs.h:26,
+ from /home/smarchi/src/binutils-gdb/gdb/breakpoint.c:20:
+ /usr/include/c++/13.1.1/bits/stl_iterator_base_funcs.h: In instantiation of ‘constexpr void std::__advance(_BidirectionalIterator&, _Distance, bidirectional_iterator_tag) [with _BidirectionalIterator = reference_to_pointer_iterator<intrusive_list_iterator<bp_location, intrusive_base_node<bp_location> > >; _Distance = long int]’:
+ /usr/include/c++/13.1.1/bits/stl_iterator_base_funcs.h:224:21: required from ‘constexpr void std::advance(_InputIterator&, _Distance) [with _InputIterator = reference_to_pointer_iterator<intrusive_list_iterator<bp_location, intrusive_base_node<bp_location> > >; _Distance = long int]’
+ /usr/include/c++/13.1.1/bits/stl_iterator_base_funcs.h:237:19: required from ‘constexpr _InputIterator std::next(_InputIterator, typename iterator_traits<_Iter>::difference_type) [with _InputIterator = reference_to_pointer_iterator<intrusive_list_iterator<bp_location, intrusive_base_node<bp_location> > >; typename iterator_traits<_Iter>::difference_type = long int]’
+ /home/smarchi/src/binutils-gdb/gdb/breakpoint.c:1073:19: required from here
+ /usr/include/c++/13.1.1/bits/stl_iterator_base_funcs.h:179:11: error: no match for ‘operator--’ (operand type is ‘reference_to_pointer_iterator<intrusive_list_iterator<bp_location, intrusive_base_node<bp_location> > >’)
+ 179 | --__i;
+ | ^~~~~
+
+ This points out that while intrusive_list_iterator has an operator--,
+ the reference_to_pointer_iterator wrapper does not. I'm not to sure why
+ the compiler chooses the overload of __advance that accepts a
+ _BidirectionalIterator, given that reference_to_pointer_iterator can't
+ be decremented, but adding those operators seems like the right thing to
+ do in any case, for completeness.
+
+ Change-Id: I8e2044b6734fadf0f21093047cf35bb7080dbdc3
+ Reviewed-By: Andrew Burgess <aburgess@redhat.com>
+
+2023-05-25 Simon Marchi <simon.marchi@efficios.com>
+
+ gdb: add breakpoint::first_loc methods
+ Add convenience first_loc methods to struct breakpoint (const and
+ non-const overloads). A subsequent patch changes the list of locations
+ to be an intrusive_list and makes the actual list private, so these
+ spots would need to change from:
+
+ b->loc
+
+ to something ugly like:
+
+ *b->locations ().begin ()
+
+ That would make the code much heavier and not readable. There is a
+ surprisingly big number of places that access the first location of
+ breakpoints. Whether this is correct, or these spots fail to consider
+ the possibility of multi-location breakpoints, I don't know. But
+ anyhow, I think that using this instead:
+
+ b->first_loc ()
+
+ conveys the intention better than the other two forms.
+
+ Change-Id: Ibbefe3e4ca6cdfe570351fe7e2725f2ce11d1e95
+ Reviewed-By: Andrew Burgess <aburgess@redhat.com>
+
+2023-05-25 Simon Marchi <simon.marchi@efficios.com>
+
+ gdb: add breakpoint "has locations" methods
+ Add three convenience methods to struct breakpoint:
+
+ - has_locations: returns true if the breakpoint has at least one
+ location
+ - has_single_location: returns true if the breakpoint has exactly one
+ location
+ - has_multiple_locations: returns true if the breakpoint has more than
+ one location
+
+ A subsequent patch changes the list of breakpoints to be an
+ intrusive_list, so all these spots would need to change. But in any
+ case, I think that this:
+
+ if (b->has_multiple_locations ())
+
+ conveys the intention better than:
+
+ if (b->loc != nullptr && b->loc->next != nullptr)
+
+ Change-Id: Ib18c3605fd35d425ef9df82cb7aacff1606c6747
+ Reviewed-By: Andrew Burgess <aburgess@redhat.com>
+
+2023-05-25 Simon Marchi <simon.marchi@efficios.com>
+
+ gdb: constify breakpoint::print_it parameter
+ The print_it method itself is const. In a subsequent patch, the
+ locations that come out of a const breakpoint will be const as well. It
+ will therefore be needed to make the last_loc output parameter const as
+ well. Make that change now to reduce the size of the following patches.
+
+ Change-Id: I7ed962950bc9582646e31e2e42beca2a1c9c5105
+ Reviewed-By: Andrew Burgess <aburgess@redhat.com>
+
+2023-05-25 Simon Marchi <simon.marchi@efficios.com>
+
+ gdb: make some breakpoint methods use `this`
+ Some implementations of breakpoint::check_status and
+ breakpoint::print_it do this:
+
+ struct breakpoint *b = bs->breakpoint_at;
+
+ bs->breakpoint_at is always the same as `this` (we can get convinced by
+ looking at the call sites of check_status and print_it), so it would
+ just be clearer to access fields through `this` instead.
+
+ Change-Id: Ic542a64fcd88e31ae2aad6feff1da278c7086891
+ Reviewed-By: Alexandra Petlanova Hajkova <ahajkova@redhat.com>
+ Reviewed-By: Andrew Burgess <aburgess@redhat.com>
+
+2023-05-25 Simon Marchi <simon.marchi@efficios.com>
+
+ gdb: get gdbarch from syscall_catchpoint instead of location
+ I noticed some methods of syscall_catchpoint doing this:
+
+ struct gdbarch *gdbarch = loc->owner->gdbarch;
+
+ `loc` is the list of locations of this catchpoint. Logically, the owner
+ the locations are this catchpoint. So this just ends up getting
+ this->gdbarch. Remove the unnecessary indirection through the loc.
+
+ syscall_catchpoint::print_recreate does something slightly different,
+ getting its arch from the loc:
+
+ struct gdbarch *gdbarch = loc->gdbarch;
+
+ I suppose it's always going to be the same arch, so get it from the
+ catchpoint there too.
+
+ Change-Id: I6f6a6f8e0cd7cfb754cecfb6249e71ec12ba4855
+ Reviewed-By: Alexandra Petlanova Hajkova <ahajkova@redhat.com>
+ Reviewed-By: Andrew Burgess <aburgess@redhat.com>
+
+2023-05-25 Alan Modra <amodra@gmail.com>
+
+ PR29189, dlltool delaylibs corrupt float/double arguments
+ PR 29189
+ * dlltool.c (i386_x64_trampoline): Save and restore xmm0-5. Make
+ use of parameter save area for integer arg regs. Comment.
+
+2023-05-25 GDB Administrator <gdbadmin@sourceware.org>
+
+ Automatic date update in version.in
+
+2023-05-24 Simon Marchi <simon.marchi@efficios.com>
+
+ gdbsupport: add support for references to checked_static_cast
+ Add a checked_static_cast overload that works with references. A bad
+ dynamic cast with references throws std::bad_cast, it would be possible
+ to implement the new overload based on that, but it seemed simpler to
+ just piggy back off the existing function.
+
+ I found some potential uses of this new overload in amd-dbgapi-target.c,
+ update them to illustrate the use of the new overload. To build
+ amd-dbgapi-target.c, on needs the amd-dbgapi library, which I don't
+ expect many people to have. But I have it, and it builds fine here. I
+ did test the new overload by making a purposely bad cast and it did
+ catch it.
+
+ Change-Id: Id6b6a7db09fe3b4aa43cddb60575ff5f46761e96
+ Reviewed-By: Lancelot SIX <lsix@lancelotsix.com>
+ Reviewed-By: Andrew Burgess <aburgess@redhat.com>
+
+2023-05-24 Andrew Burgess <aburgess@redhat.com>
+
+ gdb/testsuite: fix race in gdb.server/multi-ui-errors.exp
+ After this commit:
+
+ commit ed32754a8c7919feffc6ddb66ff1c532e4a4d1cd
+ Date: Thu Mar 9 10:45:03 2023 +0100
+
+ [gdb/testsuite] Fix gdb.server/multi-ui-errors.exp for remote target
+
+ I noticed the occasional failure in gdb.server/multi-ui-errors.exp,
+ which looked like this:
+
+ (gdb) PASS: gdb.server/multi-ui-errors.exp: interact with GDB's main UI
+ interrupt
+ (gdb)
+ Program received signal SIGINT, Interrupt.
+ 0x00007ffff7d501e7 in nanosleep () from /lib64/libc.so.6
+ FAIL: gdb.server/multi-ui-errors.exp: interrupt (timeout)
+ PASS: gdb.server/multi-ui-errors.exp: interrupt arrived
+ p server_pid
+ $1 = 718174
+ (gdb) PASS: gdb.server/multi-ui-errors.exp: p server_pid
+
+ This is triggered by this code in gdb.server/multi-ui-errors.exp:
+
+ gdb_test "interrupt"
+
+ gdb_test_multiple "" "interrupt arrived" {
+ -re "Program received signal SIGINT, Interrupt\\.\r\n" {
+ pass $gdb_test_name
+ }
+ }
+
+ The problem here is that the first interrupt will trigger the prompt
+ to be printed, and then, after some time the inferior will be
+ interrupted.
+
+ However the default pattern for gdb_test includes a '$' end anchor.
+ If expect sees the prompt with nothing following it then everything is
+ fine, and the test passes.
+
+ However, if the interrupt is quick and so what expect sees is this:
+
+ (gdb)
+ Program received signal SIGINT, Interrupt.
+ 0x00007ffff7d501e7 in nanosleep () from /lib64/libc.so.6
+
+ In this case the end anchor means that the gdb_test fails to match,
+ and eventually times out.
+
+ Fix this by passing -no-prompt-anchor to gdb_test.
+
+ Reviewed-By: Tom de Vries <tdevries@suse.de>
+
+2023-05-24 Matti Puputti <matti.puputti@intel.com>
+
+ gdb, infcmd: Support jump command with same line in multiple symtabs
+ If a header file defining a static function is included in multiple source
+ files, each calling the function, and GDB is asked to jump to a line inside
+ that function, there would be multiple locations matching the target. The
+ solution in this commit is to select the location in the current symtab.
+
+ Reviewed-By: Eli Zaretskii <eliz@gnu.org>
+ Approved-By: Andrew Burgess <aburgess@redhat.com>
+
+2023-05-24 Tom Tromey <tromey@adacore.com>
+
+ Add "args" and "env" parameters to DAP launch request
+ This patch augments the DAP launch request with some optional new
+ parameters that let the client control the command-line arguments and
+ the environment of the inferior.
+
+ Reviewed-By: Andrew Burgess <aburgess@redhat.com>
+ Reviewed-By: Eli Zaretskii <eliz@gnu.org>
+
+2023-05-24 Tom Tromey <tromey@adacore.com>
+
+ Add attributes and methods to gdb.Inferior
+ This adds two new attributes and three new methods to gdb.Inferior.
+
+ The attributes let Python code see the command-line arguments and the
+ name of "main". Argument setting is also supported.
+
+ The methods let Python code manipulate the inferior's environment
+ variables.
+
+ Reviewed-By: Eli Zaretskii <eliz@gnu.org>
+
+2023-05-24 Andreas Schwab <schwab@suse.de>
+
+ Remove accidentally added file
+
+2023-05-24 Alan Modra <amodra@gmail.com>
+
+ Don't optimise bfd_seek to same position
+ It's not worth avoiding an fseek to the same position, and can cause
+ problems if the linker's output file (which is opened "w+") is read,
+ because that can result in writing, reading, then writing again.
+
+ POSIX.1-2017 (IEEE Std 1003.1) says of fopen:
+ "When a file is opened with update mode ('+' as the second or third
+ character in the mode argument), both input and output may be
+ performed on the associated stream. However, the application shall
+ ensure that output is not directly followed by input without an
+ intervening call to fflush() or to a file positioning function
+ (fseek(), fsetpos(), or rewind()), and input is not directly followed
+ by output without an intervening call to a file positioning function,
+ unless the input operation encounters end-of-file."
+
+ * bfdio.c (bfd_seek): Always call iovec->bseek.
+
+2023-05-24 GDB Administrator <gdbadmin@sourceware.org>
+
+ Automatic date update in version.in
+
+2023-05-23 Tom Tromey <tromey@adacore.com>
+
+ Handle DAP evaluate request without a frame ID
+ DAP specifies that if an evaluate request does not have a frameID
+ parameter, then the expression is evaluated in the global scope.
+
+2023-05-23 Tom Tromey <tromey@adacore.com>
+
+ Add global_context parameter to gdb.parse_and_eval
+ This adds a 'global_context' parse_and_eval to gdb.parse_and_eval.
+ This lets users request a parse that is done at "global scope".
+
+ I considered letting callers pass in a block instead, with None
+ meaning "global" -- but then there didn't seem to be a clean way to
+ express the default for this parameter.
+
+ Reviewed-By: Eli Zaretskii <eliz@gnu.org>
+
+2023-05-23 Tom Tromey <tromey@adacore.com>
+
+ Add flags to parse_and_eval
+ This adds a flags parameter to parse_and_eval.
+
+ Add PARSER_LEAVE_BLOCK_ALONE flag
+ This adds a PARSER_LEAVE_BLOCK_ALONE flag, and changes the parse API
+ to respect it. This flag lets callers avoid any change to the
+ passed-in block and expression PC, letting them specify the context
+ exactly. In particular, now nullptr can be used to indicate that the
+ parse should not examine any local variables.
+
+ Add PARSER_DEBUG flag
+ This adds a new PARSER_DEBUG constant and changes the parser code to
+ use it. This lets us make the 'parser_debug' global 'static'.
+
+ Rearrange parser_state
+ This patch mildly rearranges parser_state, moving all the bool fields
+ together.
+
+ Boolify parser_state::comma_terminates
+ parser_state::comma_terminates ought to be boolean, and changing it
+ does not require any other changes.
+
+ Simplify parser_state constructor
+ This simplifies the parser_state constructor by having it accept a
+ parser_flags parameter.
+
+ Introduce and use parser flags
+ This patch adds a new parser_flags type and changes the parser APIs to
+ use it rather than a collection of 'int' and 'bool'. More flags will
+ be added in subsquent patches.
+
+ Move innermost_block_tracker to expression.h
+ I think parser-defs.h should hold declarations that can be used by
+ parser implementations, whereas expression.h should hold declarations
+ that are used by code that wants to call a parser. Following this
+ logic, this patch moves innermost_block_tracker to expression.h.
+
+ Avoid forward declaration in parse.c
+ This minorly rearranges parse.c to avoid the need for a forward
+ declaration.
+
+ Implement DAP loadedSources request
+ This implements the DAP loadedSources request, using gdb.execute_mi to
+ avoid having to write another custom Python API.
+
+2023-05-23 Tom Tromey <tromey@adacore.com>
+
+ Implement gdb.execute_mi
+ This adds a new Python function, gdb.execute_mi, that can be used to
+ invoke an MI command but get the output as a Python object, rather
+ than a string. This is done by implementing a new ui_out subclass
+ that builds a Python object.
+
+ Bug: https://sourceware.org/bugzilla/show_bug.cgi?id=11688
+ Reviewed-By: Eli Zaretskii <eliz@gnu.org>
+
+2023-05-23 Tom Tromey <tromey@adacore.com>
+
+ Add second mi_parse constructor
+ This adds a second mi_parse constructor. This constructor takes a
+ command name and vector of arguments, and does not do any escape
+ processing. This also changes mi_parse::args to handle parse objects
+ created this new way.
+
+ Introduce mi_parse helper methods
+ This introduces some helper methods for mi_parse that handle some of
+ the details of parsing. This approach lets us reuse them later.
+
+ Introduce "static constructor" for mi_parse
+ Change the mi_parse function to be a static method of mi_parse. This
+ lets us remove the 'set_args' setter function.
+
+ Change mi_parse_argv to a method
+ This changes mi_parse_argv to be a method of mi_parse. This is just a
+ minor cleanup.
+
+ Use accessor for mi_parse::args
+ This changes mi_parse::args to be a private member, retrieved via
+ accessor. It also changes this member to be a std::string. This
+ makes it simpler for a subsequent patch to implement different
+ behavior for argument parsing.
+
+ Use member initializers in mi_parse
+ This changes mi_parse to use member initializers rather than a
+ constructor. This is easier to follow.
+
+ Use field_signed from Python MI commands
+ If an MI command written in Python includes a number in its output,
+ currently that is simply emitted as a string. However, it's
+ convenient for a later patch if these are emitted using field_signed.
+ This does not make a difference to ordinary MI clients.
+
+2023-05-23 Aaron Merey <amerey@redhat.com>
+
+ gdb/cli-out.c: clear_current_line shouldn't trigger pagination prompt
+ clear_current_line overwrites the current line with chars_per_line
+ blank spaces. Printing the final space triggers a condition in
+ pager_file::puts that causes lines_printed to be incremented. If
+ lines_printed becomes greater than or equal to lines_allowed, the
+ pagination prompt will appear if enabled.
+
+ In this case the prompt is unnecessary since after printing the final
+ space clear_current_line immediately moves the cursor to the beginning
+ of the line with '\r'. A new line isn't actually started, so the prompt
+ ends up being spurious.
+
+ Additionally it's possible for gdb to crash during this pagination prompt.
+ Answering the prompt with 'q' throws an exception intended to bring gdb
+ back to the main event loop. But since commit 0fea10f32746,
+ clear_current_line may be called under the progress_update destructor.
+ The exception will try to propagate through the destructor, causing an abort.
+
+ To fix this, pagination is disabled for the duration for clear_current_line.
+ clear_current_line is also renamed to clear_progress_notify to help
+ indicate that it is a special purpose function intended for use with
+ do_progress_notify.
+
+ Acked-by: Eli Zaretskii <eliz@gnu.org>
+
+2023-05-23 Michael Matz <matz@suse.de>
+
+ PR30437 aarch64: make RELA relocs idempotent
+ normally RELA relocs in BFD should not consider the contents of the
+ relocated place. The aarch64 psABI is even stricter, it specifies
+ (section 5.7.16) that all RELA relocs _must_ be idempotent.
+
+ Since the inception of the aarch64 BFD backend all the relocs have a
+ non-zero src_mask, and hence break this invariant. It's normally not
+ a very visible problem as one can see it only when the relocated place
+ already contains a non-zero value, which usually only happens sometimes
+ when using 'ld -r' (or as in the testcase when jumping through hoops to
+ generate the relocations). Or with alternative toolchains that do encode
+ stuff in the relocated places with the assumption that a relocation
+ to that place ignores whatever is there (as they can according to
+ the psABI).
+
+ Golang is such a toolchain and https://github.com/golang/go/issues/39927
+ is ultimately caused by this problem: the testcase testGCData failing
+ is caused by the garbage collection data-structure to describe a type
+ containing pointers to be wrong. It's wrong because a field that's
+ supposed to contain a file-relative offset (to some gcbits) has a
+ relocation applied and that relocation has an addend which also is
+ already part of the go-produced object file (so the addend is
+ implicitely applied twice).
+
+ bfd/
+ PR ld/30437
+ * elfnn-aarch64.c (elfNN_aarch64_howto_table): Clear src_mask
+ if all relocation descriptors.
+
+ ld/
+ * testsuite/ld-aarch64/rela-idempotent.s: New testcase.
+ * testsuite/ld-aarch64/rela-idempotent.d: New.
+ * testsuite/ld-aarch64/aarch64-elf.exp: Run it.
+
+2023-05-23 Nick Clifton <nickc@redhat.com>
+
+ Updated Swedish translation for the opcodes directory
+
+2023-05-23 Bruno Larsen <blarsen@redhat.com>
+
+ gdb/testsuite: change hardcoded assembly in gdb.arch/disp-step-insn-reloc.exp
+ When testing gdb.arch/disp-step-insn-reloc.exp with clang in an x86_64
+ machine, the compiled test case would segfault when returning from
+ the function can_relocate_call, with a suggestion of a broken stack.
+ The example assembly in the commment was the following:
+
+ f:
+ MOV $1, %[ok]
+ JMP end
+ set_point0:
+ CALL f ; tracepoint here.
+ end:
+
+ And the segmentation fault happening at the final "ret" instruction of
+ can_relocate_call. Looking at the disassembled version of the later
+ half of the important function, we see:
+
+ Clang version (f starting at 11a4):
+ 00000000000011ae <set_point0>:
+ 11ae: e8 f1 ff ff ff callq 11a4 <can_relocate_call+0x14>
+ 11b3: 89 45 fc mov %eax,-0x4(%rbp)
+ 11b6: 83 7d fc 01 cmpl $0x1,-0x4(%rbp)
+ 11ba: 0f 85 0a 00 00 00 jne 11ca <set_point0+0x1c>
+ 11c0: e8 5b 00 00 00 callq 1220 <pass>
+ 11c5: e9 05 00 00 00 jmpq 11cf <set_point0+0x21>
+ 11ca: e8 61 00 00 00 callq 1230 <fail>
+ 11cf: 48 83 c4 10 add $0x10,%rsp
+ 11d3: 5d pop %rbp
+ 11d4: c3 retq
+ 11d5: 66 66 2e 0f 1f 84 00 data16 nopw %cs:0x0(%rax,%rax,1)
+ 11dc: 00 00 00 00
+
+ gcc version (f starting at 401125):
+ 000000000040112c <set_point0>:
+ 40112c: e8 f4 ff ff ff callq 401125 <can_relocate_call+0x11>
+ 401131: 89 45 fc mov %eax,-0x4(%rbp)
+ 401134: 83 7d fc 01 cmpl $0x1,-0x4(%rbp)
+ 401138: 75 07 jne 401141 <set_point0+0x15>
+ 40113a: e8 c7 ff ff ff callq 401106 <pass>
+ 40113f: eb 05 jmp 401146 <set_point0+0x1a>
+ 401141: e8 c7 ff ff ff callq 40110d <fail>
+ 401146: 90 nop
+ 401147: c9 leaveq
+ 401148: c3 retq
+
+ The epilogue of set_point0 (11cf for clang, 401146 for gcc) is the main
+ difference: GCC's version uses the leaveq instruction, which resets rsp
+ based on rbp, while clang adds the same constant to rsp that it
+ subtracted in the prologue. Clang fails because the return address that
+ is added by the "call f" instruction isn't accounted for.
+
+ This commit fixes that by adding a return instruction to f, which leaves
+ the rsp as the compilers would expect.
+
+ Approved-By: Andrew Burgess <aburgess@redhat.com>
+
+2023-05-23 Jan Beulich <jbeulich@suse.com>
+
+ x86/Intel: address quoted-symbol related FIXMEs
+ If in a "word ptr <address>" or alike construct the "ptr" part is
+ double-quoted, it shouldn't be recognized as the specific keyword we're
+ looking for (just like we don't recognize double-quoted operator or
+ register names anymore). Be careful though to tell closing from opening
+ double-quotes, as a quoted symbol may follow right afterwards.
+
+2023-05-23 Jan Beulich <jbeulich@suse.com>
+
+ x86: don't recognize quoted symbol names as registers or operators
+ The concept of quoted symbols names was introduced pretty late. Utilize
+ it to allow access to symbols with names matching that of a register (or,
+ in Intel syntax, also an identifier-like operator).
+
+ This is primarily to aid gcc when generating Intel syntax output; see
+ their bug target/53929.
+
+2023-05-23 Zhang, Jun <jun.zhang@intel.com>
+
+ Support Intel FRED LKGS
+ gas/ChangeLog:
+
+ * NEWS: Support Intel FRED LKGS.
+ * config/tc-i386.c: Add fred lkgs
+ * doc/c-i386.texi: Document .fred, .lkgs.
+ * testsuite/gas/i386/i386.exp: Add FRED LKGS tests
+ * testsuite/gas/i386/x86-64-fred-intel.d: Ditto.
+ * testsuite/gas/i386/x86-64-fred.d: Ditto.
+ * testsuite/gas/i386/x86-64-fred.s: Ditto.
+ * testsuite/gas/i386/x86-64-lkgs-intel.d: Ditto.
+ * testsuite/gas/i386/x86-64-lkgs-inval.l: Ditto.
+ * testsuite/gas/i386/x86-64-lkgs-inval.s: Ditto.
+ * testsuite/gas/i386/x86-64-lkgs.d: Ditto.
+ * testsuite/gas/i386/x86-64-lkgs.s: Ditto.
+
+ opcodes/ChangeLog:
+
+ * i386-dis.c: New entry for fred, lkgs.
+ * i386-gen.c: Add CPU_FRED CPU_LKGS.
+ * i386-init.h : Regenerated.
+ * i386-mnem.h : Regenerated.
+ * i386-opc.h: Add fred, lkgs.
+ * i386-opc.tbl: Add FRED, LKGS instructions.
+ * i386-tbl.h: Regenerated.
+
+2023-05-23 liuhongt <hongtao.liu@intel.com>
+
+ Revert "Support Intel FRED LKGS"
+ This reverts commit e5a497fe38e0ab19e16bdd9e4b4ed5e4d0056478.
+
+2023-05-23 Zhang, Jun <jun.zhang@intel.com>
+
+ Support Intel FRED LKGS
+ gas/ChangeLog:
+
+ * NEWS: Support Intel FRED LKGS.
+ * config/tc-i386.c: Add fred lkgs
+ * doc/c-i386.texi: Document .fred, .lkgs.
+ * testsuite/gas/i386/i386.exp: Add FRED LKGS tests
+ * testsuite/gas/i386/x86-64-fred-intel.d: Ditto.
+ * testsuite/gas/i386/x86-64-fred.d: Ditto.
+ * testsuite/gas/i386/x86-64-fred.s: Ditto.
+ * testsuite/gas/i386/x86-64-lkgs-intel.d: Ditto.
+ * testsuite/gas/i386/x86-64-lkgs-inval.l: Ditto.
+ * testsuite/gas/i386/x86-64-lkgs-inval.s: Ditto.
+ * testsuite/gas/i386/x86-64-lkgs.d: Ditto.
+ * testsuite/gas/i386/x86-64-lkgs.s: Ditto.
+
+ opcodes/ChangeLog:
+
+ * i386-dis.c: New entry for fred, lkgs.
+ * i386-gen.c: Add CPU_FRED CPU_LKGS.
+ * i386-init.h : Regenerated.
+ * i386-mnem.h : Regenerated.
+ * i386-opc.h: Add fred, lkgs.
+ * i386-opc.tbl: Add FRED, LKGS instructions.
+ * i386-tbl.h: Regenerated.
+
+2023-05-23 GDB Administrator <gdbadmin@sourceware.org>
+
+ Automatic date update in version.in
+
+2023-05-22 Tom de Vries <tdevries@suse.de>
+
+ [gdb/tui] Fix buglet in tui_update_variables
+ I noticed a buglet in tui_update_variables:
+ ...
+ entry = translate (tui_border_kind, tui_border_kind_translate_lrcorner);
+ if (tui_border_lrcorner != (chtype) entry->value)
+ {
+ tui_border_lrcorner = (entry->value < 0) ? ACS_LRCORNER : entry->value;
+ ...
+
+ When assigning the new value to tui_border_lrcorner, an entry->value of -1 is
+ taken into account, but not when comparing to the current value of
+ tui_border_lrcorner.
+
+ Fix this by introducing:
+ ...
+ int val = (entry->value < 0) ? ACS_LRCORNER : entry->value;
+ ...
+ and using this in both comparison and assignment.
+
+ Tested on x86_64-linux.
+
+2023-05-22 Tom Tromey <tromey@adacore.com>
+
+ Remove some FIXME comments from DAP
+ I recently added a 'dap' component to bugzilla, and I filed a few bugs
+ there. This patch removes the corresponding FIXME comments.
+
+ A few such comments still exist. In at least one case, I have a fix
+ I'll be submitting eventually; in others I think I need to do a bit of
+ investigation to properly file a bug report.
+
+2023-05-22 Richard Bunt <richard.bunt@linaro.org>
+
+ gdb: add Richard Bunt to gdb/MAINTAINERS
+
+2023-05-22 Tom de Vries <tdevries@suse.de>
+
+ [gdb/testsuite] Add Term::get_line_with_attrs
+ Add a new proc Term::get_line_with_attrs, similar to Term::get_line, that
+ annotates a tuiterm line with the active attributes.
+
+ For instance, the line representing the TUI status window with attribute mode
+ standout looks like this with Term::get_line:
+ ...
+ exec No process In: ... L?? PC: ??
+ ...
+ but like this with Term::get_line_with_attrs:
+ ...
+ <reverse:1>exec No process In: ... L?? PC: ?? <reverse:0>
+ ...
+
+ Also add Term::dump_screen_with_attrs, a Term::dump_screen variant that uses
+ Term::get_line_with_attrs instead of Term::get_line.
+
+ Tested by re-running the TUI test-cases (gdb.tui/*.exp and gdb.python/tui*.exp)
+ on x86_64-linux.
+
+2023-05-22 Tom de Vries <tdevries@suse.de>
+
+ [gdb/testsuite] Factor out Term::_reset_attrs
+ Factor out new proc Term::_reset_attrs.
+
+ Tested by re-running the TUI test-cases (gdb.tui/*.exp and gdb.python/tui*.exp)
+ on x86_64-linux.
+
+2023-05-22 Alan Modra <amodra@gmail.com>
+
+ Re: readelf: Support SHT_RELR/DT_RELR for -r
+ Revert value of DT_ENCODING to as it was before commit a7fd118627, and
+ adjust readelf.
+
+ include/
+ * elf/common.h (DT_ENCODING): Set back to 32.
+ binutils/
+ * readelf.c (struct filedata): Don't size dynamic_info array
+ using DT_ENCODING.
+
+2023-05-22 Alan Modra <amodra@gmail.com>
+
+ PowerPC64 report number of stub iterations
+ As a developer it is sometimes useful to know how many times stubs
+ have been resized. Report the count for users too, in ld --stats.
+
+2023-05-22 GDB Administrator <gdbadmin@sourceware.org>
+
+ Automatic date update in version.in
+
+2023-05-21 GDB Administrator <gdbadmin@sourceware.org>
+
+ Automatic date update in version.in
+
+2023-05-20 Alan Modra <amodra@gmail.com>
+
+ Re: Bug 23686, two segment faults in nm
+ The fix for pr23686 had a hole in the reloc address sanity check,
+ the calculation could overflow. Note that stabsize is known to be a
+ non-zero multiple of 12 so stabsize - 4 can't underflow.
+
+ PR 23686
+ * syms.c (_bfd_stab_section_find_nearest_line): Correct
+ r->address sanity check.
+
+2023-05-20 Alan Modra <amodra@gmail.com>
+
+ coffcode.h handle_COMDAT tidy
+ I started down the path of attempting to fix
+ https://sourceware.org/pipermail/binutils/2023-April/127263.html but
+ decided after a while that I didn't want to mess with this code..
+
+ This patch is a just a few things that I thought worth doing, the main
+ one being reporting of errors up the call chain. The while loop to
+ for loop change is shamelessly stolen from Oleg.
+
+ * coffcode.h (handle_COMDAT): Return bool. Make sec_flags a
+ flagword*, and adjust to suit. Replace while loop with for
+ loop. Check isym.n_numaux before reading aux entries. Alloc
+ coff_comdat_info and name in one call to bfd_alloc. Remove
+ goto breakloop.
+ (styp_to_sec_flags): Adjust handle_COMDAT call.
+
+2023-05-20 Alan Modra <amodra@gmail.com>
+
+ tic54x set_arch_mach
+ The tic54x backend provides its own coff_set_arch_mach, but wants to
+ use the standard coff_set_section_contents. BFD_JUMP_TABLE_WRITE
+ defines both of these functions, so the code also provides a wrapper
+ for coff_set_section_contents. This is all quite OK, but I was on a
+ mission to remove unnecessary declarations in coffcode.h, and on
+ deleting the one for coff_set_arch_mach ran into a warning about the
+ function being unused. I could have kept that declaration with its
+ ATTRIBUTE_UNUSED or written "static bool ATTRIBUTE_UNUSED" on the
+ definition but the latter is not usual and looks odd to me. So I
+ had a closer look at tic54x_set_arch_mach and decided the function is
+ very likely wrong to allow bfd_arch_unknown. Thus the backend should
+ be using the standard coff_set_arch_mach.
+
+ * coff-tic54x.c: Use BFD_JUMP_TABLE_WRITE (coff) in target vecs.
+ (tic54x_coff_set_arch_mach): Delete.
+ (tic54x_set_section_contents): Delete.
+ * coffcode.h: Delete unnecessary forward declarations.
+
+2023-05-20 GDB Administrator <gdbadmin@sourceware.org>
+
+ Automatic date update in version.in
+
+2023-05-19 Tom Tromey <tromey@adacore.com>
+
+ Update documentation for Python Frame.older and Frame.newer
+ I noticed that Frame.older and Frame.newer don't document that they
+ return None at the ends of the stack. This patch updates the
+ documentation, and also fixes a somewhat related typo in a comment
+ that I noticed while digging into this.
+
+ Approved-By: Eli Zaretskii <eliz@gnu.org>
+
+2023-05-19 Jan Beulich <jbeulich@suse.com>
+
+ ld: drop stray blank from ld.texi
+ At least older makeinfo complains about it. Also fix an apparent typo
+ while touching that line.
+
+2023-05-19 Jan Vrany <jan.vrany@labware.com>
+
+ gdb: fix post-hook execution for remote targets
+ Commit b5661ff2 ("gdb: fix possible use-after-free when
+ executing commands") attempted to fix possible use-after-free
+ in case command redefines itself.
+
+ Commit 37e5833d ("gdb: fix command lookup in execute_command ()")
+ updated the previous fix to handle subcommands as well by using the
+ original command string to lookup the command again after its execution.
+
+ This fixed the test in gdb.base/define.exp but it turned out that it
+ does not work (at least) for "target remote" and "target extended-remote".
+
+ The problem is that the command buffer P passed to execute_command ()
+ gets overwritten in dont_repeat () while executing "target remote"
+ command itself:
+
+ #0 dont_repeat () at top.c:822
+ #1 0x000055555730982a in target_preopen (from_tty=1) at target.c:2483
+ #2 0x000055555711e911 in remote_target::open_1 (name=0x55555881c7fe ":1234", from_tty=1, extended_p=0)
+ at remote.c:5946
+ #3 0x000055555711d577 in remote_target::open (name=0x55555881c7fe ":1234", from_tty=1) at remote.c:5272
+ #4 0x00005555573062f2 in open_target (args=0x55555881c7fe ":1234", from_tty=1, command=0x5555589d0490)
+ at target.c:853
+ #5 0x0000555556ad22fa in cmd_func (cmd=0x5555589d0490, args=0x55555881c7fe ":1234", from_tty=1)
+ at cli/cli-decode.c:2737
+ #6 0x00005555573487fd in execute_command (p=0x55555881c802 "4", from_tty=1) at top.c:688
+
+ Therefore the second call to lookup_cmd () at line 697 fails to find
+ command because the original command string is gone.
+
+ This commit addresses this particular problem by creating a *copy* of
+ original command string for the sole purpose of using it after command
+ execution to lookup the command again. It may not be the most efficient
+ way but it's safer given that command buffer is shared and overwritten
+ in hard-to-foresee situations.
+
+ Tested on x86_64-linux.
+
+ PR 30249
+ Bug: https://sourceware.org/bugzilla/show_bug.cgi?id=30249
+
+ Approved-By: Tom Tromey <tom@tromey.com>
+
+2023-05-19 Richard Bunt <richard.bunt@linaro.org>
+
+ gdb: Remove redundant frame switching
+ 547ce8f00b fixed an issue where dynamic types were not being resolved
+ correctly prior to printing a value. The same issue was discovered when
+ printing the value using mi-mode, which was not covered by the fix.
+ Porting the fix to the mi-mode code path resolved the issue.
+
+ However, it was discovered that a later patch series, ending
+ 2fc3b8a4cb8, independently fixed the issue in both the cli- and mi-mode
+ code paths, making the original fix unneeded.
+
+ This commit removes this extra frame switch and adds test coverage for
+ the mi-mode scenario to protect against any future divergence in this
+ area.
+
+ GDB built with GCC 11.
+
+ No test suite regressions detected. Compilers: GCC 12.1.0, ACfL 22.1,
+ Intel 22.1; Platforms: x86_64, aarch64.
+
+ Approved-By: Tom Tromey <tom@tromey.com>
+
+2023-05-19 Andrew Burgess <aburgess@redhat.com>
+
+ gdb: safety checks in skip_prologue_using_sal
+ While working on the previous patch I reverted this commit:
+
+ commit e86e87f77fd5d8afb3e714f1d9e09e0ff5b4e6ff
+ Date: Tue Nov 28 16:23:32 2006 +0000
+
+ * symtab.c (find_pc_sect_line): Do not return a line before
+ the start of a symtab.
+
+ When I re-ran the testsuite I saw some GDB crashes in the tests:
+
+ gdb.dwarf2/dw2-line-number-zero.exp
+ gdb.dwarf2/dw2-lines.exp
+ gdb.dwarf2/dw2-vendor-extended-opcode.exp
+
+ GDB was reading beyond the end of an array in the function
+ skip_prologue_using_sal.
+
+ Now, without the above commit reverted I don't believe that this
+ should ever happen. Reverting the above commit effectively breaks
+ GDB's symtab_and_line lookup, we try to find a result for an address,
+ and return the wrong symtab and line-table. In
+ skip_prologue_using_sal we then walk the line table looking for an
+ appropriate entry, except we never find one, and GDB just keeps going,
+ wandering off the end of the array.
+
+ However, I think adding extra protection to prevent walking off the
+ end of the array is pretty cheap, and if something does go wrong in
+ the future then this should prevent a random crash.
+
+ Obviously, I have no reproducer for this, as I said, I don't think
+ this should impact GDB at all, this is just adding a little extra
+ caution.
+
+ Reviewed-By: Tom Tromey <tom@tromey.com>
+
+2023-05-19 Andrew Burgess <aburgess@redhat.com>
+
+ gdb/testsuite: test for a function with no line table
+ This commit adds a test for the following commit:
+
+ commit e86e87f77fd5d8afb3e714f1d9e09e0ff5b4e6ff
+ Date: Tue Nov 28 16:23:32 2006 +0000
+
+ * symtab.c (find_pc_sect_line): Do not return a line before
+ the start of a symtab.
+
+ We have been carrying a test for that commit in the Fedora GDB tree
+ since that commit was added to GDB. I don't know why the test wasn't
+ added along with the original commit, but as was written, the test is
+ pretty gross, it uses objcopy to pull the .text section from an object
+ file, which was then injected into another source file within a .asm
+ statement...
+
+ ... these days we can just make use of the DWARF assembler to achieve
+ the same results, so I've rewritten the test and think it is worth
+ adding this to upstream GDB.
+
+ The original patch was about about how we find the best symtab and
+ line table entry, and what to do when GDB can't find a good match.
+
+ The new test creates a CU with two functions, only one of which is
+ covered by the line table. With the above patch reverted GDB returns
+ an invalid address.
+
+ With the above patch reverted I did run the testsuite to see what
+ other tests might already be exercising this functionality, and I
+ found two tests:
+
+ gdb.dwarf2/dw2-step-out-of-function-no-stmt.exp
+ gdb.dwarf2/dw2-vendor-extended-opcode.exp
+
+ These are pretty similar, they either create minimal, or no line table
+ for one of the functions in the source file, and as a consequence GDB
+ returns an unexpected address at some point during the test.
+
+ However, both of those tests are really focused on other issues, so I
+ think this new test does add some value. Plus the new test is not
+ large, so it's not a huge cost to also run this new test.
+
+ Reviewed-By: Tom Tromey <tom@tromey.com>
+
+2023-05-19 Andrew Burgess <aburgess@redhat.com>
+
+ gdb/breakpoint: use warning function instead of gdb_printf
+ Noticed that in breakpoint.c, in one place, we do this:
+
+ gdb_printf (_("warning: Error removing "
+ "breakpoint %d\n"),
+ old_loc->owner->number);
+
+ Instead of using the `warning` function. There are a number of
+ differences between using gdb_printf like this and calling `warning`,
+ the main one is probably that real warnings are sent to gdb_stderr,
+ while the above gdb_printf call will go to gdb_stdout.
+
+ In this commit I:
+
+ 1. Change to call `warning`, we can drop the "warning: " prefix from
+ the string in breakpoint.c,
+
+ 2. Update the warning text, I now start with a lower case 'e', which
+ I believe is the GDB style for warnings,
+
+ 3. And I have included the address of the bp_location in the warning
+ messsage,
+
+ 4. Finally, I update all the tests (2) that include this error
+ message.
+
+ Reviewed-By: Tom Tromey <tom@tromey.com>
+
+2023-05-19 Andrew Burgess <aburgess@redhat.com>
+
+ gdb/testsuite: handle older Python versions in gdb.python/py-disasm.exp
+ It was pointed out on the mailing list that the new tests added in
+ this commit:
+
+ commit 4de4e48514fc47aeb4ca95cd4091e2a333fbe9e1
+ Date: Tue Jan 24 15:35:45 2023 +0000
+
+ gdb/python: extend the Python Disassembler API to allow for styling
+
+ will fail when GDB is built with Python 3.6 or earlier. This is
+ because the error that is emitted when a function argument is missing
+ changed in Python 3.7, instead of an error like this:
+
+ Python Exception <class 'TypeError'>: function missing required argument 'style' (pos 1)
+
+ earlier versions of Python emit:
+
+ Python Exception <class 'TypeError'>: Required argument 'style' (pos 1) not found
+
+ and the new tests didn't allow for this.
+
+ This commit fixes this by allowing either pattern. I've tested this
+ building GDB against Python 3.7.9 and 3.6.15, with this commit all
+ tests in gdb.python/py-disasm.exp now pass.
+
+2023-05-19 Kuan-Lin Chen <rufus@andestech.com>
+
+ RISC-V: Support subtraction of .uleb128.
+ https://github.com/riscv-non-isa/riscv-elf-psabi-doc/commit/96d6e190e9fc04a8517f9ff7fb9aed3e9876cbd6
+
+ There are some known limitations for now,
+
+ * Do not shrink the length of the uleb128 value, even if the value is reduced
+ after relaxations. Also reports error if the length grows up.
+
+ * The R_RISCV_SET_ULEB128 needs to be paired with and be placed before the
+ R_RISCV_SUB_ULEB128.
+
+ bfd/
+ * bfd-in2.h: Regenerated.
+ * elfnn-riscv.c (perform_relocation): Perform R_RISCV_SUB_ULEB128 and
+ R_RISCV_SET_ULEB128 relocations. Do not shrink the length of the
+ uleb128 value, and report error if the length grows up. Called the
+ generic functions, _bfd_read_unsigned_leb128 and _bfd_write_unsigned_leb128,
+ to encode the uleb128 into the section contents.
+ (riscv_elf_relocate_section): Make sure that the R_RISCV_SET_ULEB128
+ must be paired with and be placed before the R_RISCV_SUB_ULEB128.
+ * elfxx-riscv.c (howto_table): Added R_RISCV_SUB_ULEB128 and
+ R_RISCV_SET_ULEB128.
+ (riscv_reloc_map): Likewise.
+ (riscv_elf_ignore_reloc): New function.
+ * libbfd.h: Regenerated.
+ * reloc.c (BFD_RELOC_RISCV_SET_ULEB128, BFD_RELOC_RISCV_SUB_ULEB128):
+ New relocations to support .uleb128 subtraction.
+ gas/
+ * config/tc-riscv.c (md_apply_fix): Added BFD_RELOC_RISCV_SET_ULEB128
+ and BFD_RELOC_RISCV_SUB_ULEB128.
+ (s_riscv_leb128): Updated to allow uleb128 subtraction.
+ (riscv_insert_uleb128_fixes): New function, scan uleb128 subtraction
+ expressions and insert fixups for them.
+ (riscv_md_finish): Called riscv_insert_uleb128_fixes for all sections.
+ include/
+ * elf/riscv.h ((R_RISCV_SET_ULEB128, (R_RISCV_SUB_ULEB128): Defined.
+ ld/
+ * testsuite/ld-riscv-elf/ld-riscv-elf.exp: Updated.
+ * testsuite/ld-riscv-elf/uleb128*: New testcase for uleb128 subtraction.
+ binutils/
+ * testsuite/binutils-all/nm.exp: Updated since RISCV supports .uleb128.
+
+2023-05-19 Nelson Chu <nelson@rivosinc.com>
+
+ RISC-V: Minor improvements for dis-assembler.
+ * Extract all private_data initializations into riscv_init_disasm_info, which
+ called from print_insn_riscv rather than riscv_disassemble_insn.
+
+ * The disassemble_free_target seems like the right place to release all target
+ private_data, also including the internal data structures, like riscv_subsets.
+ Therefore, add a new function, disassemble_free_riscv, to release them for safe.
+
+ opcodes/
+ * disassemble.c (disassemble_free_target): Called disassemble_free_riscv
+ for riscv to release private_data and internal data structures.
+ * disassemble.h: Added extern disassemble_free_riscv.
+ * riscv-dis.c (riscv_init_disasm_info): New function, used to init
+ riscv_private_data.
+ (riscv_disassemble_insn): Moved riscv_private_data initializations
+ into riscv_init_disasm_info.
+ (print_insn_riscv): Called riscv_init_disasm_info to init
+ riscv_private_data once time.
+ (disassemble_free_riscv): New function, used to free the internal data
+ structures, like riscv_subsets.
+
+2023-05-19 Jan Beulich <jbeulich@suse.com>
+
+ x86: permit all relational operators in insn operands
+ Oddly enough == and != were not permitted, because of '=' not having
+ been listed in operand_special_chars[].
+
+2023-05-19 Jan Beulich <jbeulich@suse.com>
+
+ x86: further adjust extend-to-32bit-address conditions
+ While a442cac5084e ("ix86: wrap constants") helped address a number of
+ inconsistencies between BFD64 and !BFD64 builds, it has also resulted in
+ certain bogus uses of constants to no longer be warned about. Leverage
+ the md_optimize_expr() hook to adjust when to actually truncate
+ expressions to 32 bits - any involvement of binary expressions (which
+ would be evaluated in 32 bits only when !BFD64) signals the need for
+ doing so. Plain constants (or ones merely subject to unary operators)
+ should remain un-truncated - they would be handled as bignums when
+ !BFD64, and hence are okay to permit.
+
+ To compensate
+ - slightly extend optimize_imm() (to be honest I never understood why
+ the code being added - or something similar - wasn't there in the
+ first place),
+ - adjust expectations of the disp-imm-32 testcase (there are now
+ warnings, as there should be for any code which won't build [warning-
+ free] when !BFD64, and Disp8/Imm8 are no longer used in the warned
+ about cases).
+
+2023-05-19 Jan Beulich <jbeulich@suse.com>
+
+ gas: invoke md_optimize_expr() also for unary expressions
+ Give backends a chance to see these, just as they can see binary ones.
+ Most of those which use this hook already cope with NULL being passed
+ for the left operand (typically because of checking the operator first).
+ Adjust the two which don't.
+
+ Take the opportunity and also document the hook.
+
+2023-05-19 Jan Beulich <jbeulich@suse.com>
+
+ gas: maintain O_constant signedness in more cases
+ Unary '~' doesn't really produce an unsigned result. Neither does
+ subtraction (unless taking operand values into consideration). And an
+ abstract operator applied to two operands which aren't both unsigned
+ can't be assumed to yield an unsigned result; exceptions are
+ - shifts, where only signedness of the left hand operand matters,
+ - comparisons, which - unlike unary '!' - produce signed results (they
+ deliver 0 or ~0, as opposed to '!', which yields 0 or 1),
+ - logical operators (yielding 0 or 1 and hence treated like unary '!').
+
+ While doing this (specifically while extending the all/quad testcase),
+ update .quad and .8byte documentation: With 64-bit architectures now
+ being common, it is highly inappropriate to state that these directives
+ unconditionally require bignums.
+
+2023-05-19 Jan Beulich <jbeulich@suse.com>
+
+ x86: tighten extend-to-32bit-address conditions
+ In a442cac5084e ("ix86: wrap constants") I made the truncation condition
+ too relaxed: Any indication of a mode that's possible with BFD64 only
+ should avoid the truncation. Therefore, like in the other two cases of
+ calls to extend_to_32bit_address(), also check whether we're generating
+ a 64-bit object.
+
+2023-05-19 GDB Administrator <gdbadmin@sourceware.org>
+
+ Automatic date update in version.in
+
+2023-05-18 Tom Tromey <tromey@adacore.com>
+
+ Use lower-case in @sc in the documentation
+ Eli pointed out that @sc only produces small caps for lower case
+ letters in its argument, so it's weird to write it using upper-case
+ letters. This patch fixes the instances I found.
+
+ Approved-By: Eli Zaretskii <eliz@gnu.org>
+
+2023-05-18 Simon Marchi <simon.marchi@efficios.com>
+
+ gdb.fortran/lbound-ubound.exp: read expected lbound and ubound from function parameters (PR 30414)
+ gdb.fortran/lbound-ubound.exp reads the expected lbound and ubound
+ values by reading some output from the inferior. This is racy when
+ running on boards where the inferior I/O is on a separate TTY than
+ GDB's, such as native-gdbserver.
+
+ I sometimes see this behavior:
+
+ (gdb) continue
+ Continuing.
+
+ Breakpoint 2, do_test (lb=..., ub=...) at /home/jenkins/workspace/binutils-gdb_master_linuxbuild/platform/jammy-amd64/target_board/nati
+ ve-gdbserver/src/binutils-gdb/gdb/testsuite/gdb.fortran/lbound-ubound.F90:45
+ 45 print *, "" ! Test Breakpoint
+ (gdb) Remote debugging from host ::1, port 37496
+
+ Expected GDB Output:
+
+ LBOUND = (-8, -10)
+ UBOUND = (-1, -2)
+ APB: Run a test here
+ APB: Expected lbound '(-8, -10)'
+ APB: Expected ubound ''
+
+ What happened is that expect read the output from GDB before the output
+ from the inferior, triggering this gdb_test_multiple clause:
+
+ -re "$gdb_prompt $" {
+ set found_prompt true
+
+ if {$found_dealloc_breakpoint
+ || ($expected_lbound != "" && $expected_ubound != "")} {
+ # We're done.
+ } else {
+ exp_continue
+ }
+ }
+
+ So it set found_prompt, but the gdb_test_multiple kept going because
+ found_dealloc_breakpoint is false (this is the flag indicating that the
+ test is finished) and we still don't have expected_lbound and
+ expected_ubound. Then, expect reads in the inferior I/O, triggering
+ this clause:
+
+ -re ".*LBOUND = (\[^\r\n\]+)\r\n" {
+ set expected_lbound $expect_out(1,string)
+ if {!$found_prompt} {
+ exp_continue
+ }
+ }
+
+ This sets expected_lbound, but since found_prompt is true, we don't do
+ exp_continue, and exit the gdb_test_multiple, without having an
+ expected_ubound.
+
+ Change the test to read the values from the lb and ub function
+ parameters instead. As far as I understand, this still exercises what
+ we want to test. These variables contain the return values of the
+ lbound and ubound functions as computed by the program. We'll use them
+ to check the return values of the lbound and ubound functions as
+ computed by GDB.
+
+ Change-Id: I3c4d3d17d9291870a758a42301d15a007821ebb5
+ Bug: https://sourceware.org/bugzilla/show_bug.cgi?id=30414
+
+2023-05-18 Hui Li <lihui@loongson.cn>
+
+ gdb/elfread.c: Add plt symbol check for _PROCEDURE_LINKAGE_TABLE_
+ In the current code, when execute the following test on LoongArch:
+
+ $ make check-gdb TESTS="gdb.base/gnu-ifunc.exp"
+ === gdb Summary ===
+
+ # of expected passes 111
+ # of unexpected failures 62
+
+ According to IFUNC's working process [1]. first time the IFUNC function
+ is called, the dynamic linker will not simply fill the .got.plt entry
+ with the actual address of IFUNC symbol, it will call the IFUNC resolver
+ function and take the return address, uses it as the sym-bound address
+ and puts it in the .got.plt entry. Initial address in .got.plt entry is
+ not a real function addresss. Depending on the compiler implementation,
+ some different addresses will be filled in. Most architectures will use
+ a .plt entry address to fill in the corresponding .got.plt entry.
+
+ In gdb, elf_gnu_ifunc_resolve_addr() will be called to return a real
+ IFUNC function addresss. First check to see if the real address for
+ the IFUNC symbol has been resolved by the following function:
+
+ elf_gnu_ifunc_resolve_name (const char *name, CORE_ADDR *addr_p)
+ {
+ if (elf_gnu_ifunc_resolve_by_cache (name, addr_p))
+ return true;
+
+ if (elf_gnu_ifunc_resolve_by_got (name, addr_p))
+ return true;
+
+ return false;
+ }
+
+ in elf_gnu_ifunc_resolve_by_got(), it gets the contents of the
+ .got.plt entry and determines if the contents is the correct address
+ by calling elf_gnu_ifunc_record_cache(). Based on the IFUNC working
+ principle analysis above, the address filled in the .got.plt entry is
+ not the actual target function address initially, it would be a .plt
+ entry address corresponding symbol like *@plt. In this case, gdb just
+ go back to execute the resolver function and puts the return address
+ in the .got.plt entry. After that, gdb can get a real ifun address via
+ .got.plt entry.
+
+ On LoongArch, initially, each address filled in the .got.plt entries
+ is the first .plt entry address. Some architectures such as LoongArch
+ define the symbol _PROCEDURE_LINKAGE_TABLE_ at the start of the .plt
+ section. This symbol is the first plt entry, so gdb needs to check
+ this symbol in elf_gnu_ifunc_record_cache().
+
+ On LoongArch .got.plt and .plt section as follow:
+
+ $objdump -D gdb/testsuite/outputs/gdb.base/gnu-ifunc/gnu-ifunc-0-0-0
+ ...
+ 0000000120010008 <.got.plt>:
+ 120010008: ffffffff 0xffffffff
+ 12001000c: ffffffff 0xffffffff
+ ...
+ 120010018: 20004000 ll.w $zero, $zero, 64(0x40)
+ 12001001c: 00000001 0x00000001
+ 120010020: 20004000 ll.w $zero, $zero, 64(0x40)
+ 120010024: 00000001 0x00000001
+ 120010028: 20004000 ll.w $zero, $zero, 64(0x40)
+ 12001002c: 00000001 0x00000001
+ 120010030: 20004000 ll.w $zero, $zero, 64(0x40)
+ 120010034: 00000001 0x00000001
+
+ ...
+ Disassembly of section .plt:
+
+ 0000000120004000 <_PROCEDURE_LINKAGE_TABLE_>:
+ 120004000: 1c00018e pcaddu12i $t2, 12(0xc)
+ 120004004: 0011bdad sub.d $t1, $t1, $t3
+ 120004008: 28c021cf ld.d $t3, $t2, 8(0x8)
+ 12000400c: 02ff51ad addi.d $t1, $t1, -44(0xfd4)
+ 120004010: 02c021cc addi.d $t0, $t2, 8(0x8)
+ 120004014: 004505ad srli.d $t1, $t1, 0x1
+ 120004018: 28c0218c ld.d $t0, $t0, 8(0x8)
+ 12000401c: 4c0001e0 jirl $zero, $t3, 0
+
+ 0000000120004020 <__libc_start_main@plt>:
+ 120004020: 1c00018f pcaddu12i $t3, 12(0xc)
+ 120004024: 28ffe1ef ld.d $t3, $t3, -8(0xff8)
+ 120004028: 4c0001ed jirl $t1, $t3, 0
+ 12000402c: 03400000 andi $zero, $zero, 0x0
+
+ 0000000120004030 <abort@plt>:
+ 120004030: 1c00018f pcaddu12i $t3, 12(0xc)
+ 120004034: 28ffc1ef ld.d $t3, $t3, -16(0xff0)
+ 120004038: 4c0001ed jirl $t1, $t3, 0
+ 12000403c: 03400000 andi $zero, $zero, 0x0
+
+ 0000000120004040 <gnu_ifunc@plt>:
+ 120004040: 1c00018f pcaddu12i $t3, 12(0xc)
+ 120004044: 28ffa1ef ld.d $t3, $t3, -24(0xfe8)
+ 120004048: 4c0001ed jirl $t1, $t3, 0
+ 12000404c: 03400000 andi $zero, $zero, 0x0
+ ...
+
+ With this patch:
+
+ $make check-gdb TESTS="gdb.base/gnu-ifunc.exp"
+ === gdb Summary ===
+
+ #of expected passes 173
+
+ [1] https://sourceware.org/glibc/wiki/GNU_IFUNC
+
+2023-05-18 Alan Modra <amodra@gmail.com>
+
+ Re: Add section caches to coff_data_type
+ Another thing, section target_index is renumbered in
+ coff_compute_section_file_positions and _bfd_xcoff_bfd_final_link. I
+ don't know that there is currently any way that the output bfd
+ section_by_target_index could be populated before this point but
+ clear them out so no one need worry about it.
+
+ * coffcode.h (coff_compute_section_file_positions): Clear
+ section_by_target_index hash table when changing target_index.
+ (_bfd_xcoff_bfd_final_link): Likewise.
+
+2023-05-18 Tom de Vries <tdevries@suse.de>
+
+ [gdb/testsuite] Fix whitespace and indentation in lib/tuiterm.exp
+ I noticed a trailing whitespace and some indentation errors in lib/tuiterm.exp.
+
+ Fix these.
+
+ Tested by re-running the TUI test-cases (gdb.tui/*.exp and gdb.python/tui*.exp)
+ on x86_64-linux.
+
+2023-05-18 Indu Bhagat <indu.bhagat@oracle.com>
+
+ libsframe: testsuite: add tests for sframe_get_funcdesc_with_addr API
+ sframe_get_funcdesc_with_addr API is currently used internally by the
+ sframe_find_fre ().
+
+ In this test, we create three dummy SFrame FDEs with 4 FREs each. Then,
+ we use few negative tests to lookup FREs with PCs not in the range of
+ PCs covered by the FDEs, ensuring graceful return from
+ sframe_get_funcdesc_with_addr in all cases. Some positive tests are
+ also added that exercise further scenarios as well.
+
+ libsframe/
+ * Makefile.in: Regenerated.
+ * testsuite/libsframe.find/find.exp: Include new test.
+ * testsuite/libsframe.find/findfunc-1.c: New Test.
+ * testsuite/libsframe.find/local.mk: Include new test.
+
+2023-05-18 Indu Bhagat <indu.bhagat@oracle.com>
+
+ libsframe: testsuite: add new tests for sframe_find_fre API
+ libsframe provides an API to find the FRE associated with a given PC in
+ the program. This patch adds a direct test of this API.
+
+ In this test, we create two dummy SFrame FDEs with 4 FREs each. Then we
+ test that sframe_find_fre () works for the first, second, third and the
+ last FRE from one of the FDEs. Such a test ensures better regression
+ testing for the sframe_find_fre () function which is going to be the
+ bread and butter of an SFrame based stack tracer.
+
+ libsframe/
+ * Makefile.in: Regenerated.
+ * testsuite/libsframe.find/find.exp: New test.
+ * testsuite/libsframe.find/findfre-1.c: New test.
+ * testsuite/libsframe.find/local.mk: Build new test.
+ * testsuite/local.mk: Include libsframe.find.
+
+2023-05-18 Alan Modra <amodra@gmail.com>
+
+ Re: Add section caches to coff_data_type
+ Commit 0e759f232b6d regressed these tests:
+ rs6000-aix7.2 +FAIL: Garbage collection test 1 (32-bit)
+ rs6000-aix7.2 +FAIL: Garbage collection test 1 (64-bit)
+ rs6000-aix7.2 +FAIL: Glink test 1 (32-bit)
+ rs6000-aix7.2 +FAIL: Glink test 1 (64-bit)
+
+ Investigation showed segfaults in coff_section_from_bfd_index called
+ by xcoff_write_global_symbol due to the hash table pointer being
+ NULL. Well, yes, the hash table isn't initialised for the output bfd.
+ mkobject_hook is the wrong place to do that.
+
+ * coffcode.h: Revert 0e759f232b6d changes.
+ * peicode.h: Likewise.
+ * coff-x86_64.c (htab_hash_section_index, htab_eq_section_index):
+ Moved here from coffcode.h.
+ (coff_amd64_rtype_to_howto): Create section_by_index htab.
+ * coffgen.c (htab_hash_section_target_index),
+ (htab_eq_section_target_index): Moved here from coffcode.h.
+ (coff_section_from_bfd_index): Create section_by_target_index
+ htab. Stash newly created sections in htab.
+
+2023-05-18 Alan Modra <amodra@gmail.com>
+
+ PR11601, Solaris assembler compatibility doesn't work
+ Well, it doesn't work on x86 or ppc, which both have # starting
+ comments anywhere on a line. I think it is therefore only useful on
+ sparc.
+
+ PR 11601
+ * config/obj-elf.c (obj_elf_section_word): Only compile for sparc.
+ (obj_elf_section): Only support solaris .section directive on
+ sparc.
+ * doc/as.texi (Section): Mention that solaris .section
+ directive is only supported for sparc.
+
+2023-05-18 GDB Administrator <gdbadmin@sourceware.org>
+
+ Automatic date update in version.in
+
+2023-05-17 Tom Tromey <tom@tromey.com>
+
+ Special case "&str" in Rust parser
+ "&str" is an important type in Rust -- it's the type of string
+ literals. However, the compiler puts it in the DWARF in a funny way.
+ The slice itself is present and named "&str". However, the Rust
+ parser doesn't look for types with names like this, but instead tries
+ to construct them from components. In this case it tries to make a
+ pointer-to-"str" -- but "str" isn't always available, and in any case
+ that wouldn't yield the best result.
+
+ This patch adds a special case for &str.
+
+ Bug: https://sourceware.org/bugzilla/show_bug.cgi?id=22251
+ Reviewed-By: Andrew Burgess <aburgess@redhat.com>
+
+2023-05-17 Luca Bacci <luca.bacci@outlook.com>
+
+ Decorated symbols in import libs (BUG 30421)
+ PR 30421
+ * cofflink.c (_decoration_hash_newfunc): New function. (_bfd_coff_link_hash_table_init): Call it.
+ * libcoff-in.h (struct coff_link_hash_table): Add decoration_hash field. (struct decoration_hash_entry): Declare. (_decoration_hash_newfunc): Prototype.
+ * libcoff.h: Regenerate.
+
+ * emultempl/pe.em (set_decoration): New function. (pe_fixup_stdcalls): Call the new function.
+ * emultempl/pep.em (set_decoration): New function. (pep_fixup_stdcalls): Call the new function.
+ * pe-dll.c (make_one): Check for decoated symbols.
+
+2023-05-17 Alan Modra <amodra@gmail.com>
+
+ PR29961, plugin-api.h: "Could not detect architecture endianess"
+ Found when attempting to build binutils on sparc sunos-5.8 where
+ sys/byteorder.h defines _BIG_ENDIAN but not any of the BYTE_ORDER
+ variants. This patch adds the extra tests to cope with the old
+ machine, and tidies the header a little.
+
+ PR 29961
+ plugin-api.h: When handling non-gcc or gcc < 4.6.0 include
+ necessary header files before testing macros. Make more use
+ of #elif. Test _LITTLE_ENDIAN and _BIG_ENDIAN in final tests.
+
+2023-05-17 Alan Modra <amodra@gmail.com>
+
+ gcc-4.5 build fixes
+ Trying to build binutils with an older gcc currently fails. Working
+ around these gcc bugs is not onerous so let's fix them.
+
+ bfd/
+ * elf32-csky.c (csky_elf_size_dynamic_sections): Don't type-pun
+ pointer.
+ * elf32-rl78.c (rl78_compute_complex_reloc): Rename "stat"
+ variable to "status".
+ gas/
+ * compress-debug.c (compress_finish): Supply all fields in
+ ZSTD_inBuffer initialisation.
+ include/
+ * xtensa-dynconfig.h (xtensa_isa_internal): Delete unnecessary
+ forward declaration.
+ opcodes/
+ * loongarch-opc.c: Supply all fields of zero struct initialisation
+ in various opcode tables.
+
+2023-05-17 GDB Administrator <gdbadmin@sourceware.org>
+
+ Automatic date update in version.in
+
+2023-05-16 Vladimir Mezentsev <vladimir.mezentsev@oracle.com>
+
+ gprofng: include a new function in the right place
+ Static function name is not available in stripped libraries.
+ In this case, gprofng maps PC to a fake function like <static>@0xPC (<libname>).
+ Sometimes gprofng creates two functions instead of one.
+ Also FUNC_FLAG_SIMULATED is needed for these fake functions.
+
+ gprofng/ChangeLog
+ 2023-05-11 Vladimir Mezentsev <vladimir.mezentsev@oracle.com>
+
+ * src/LoadObject.cc (LoadObject::find_function): Set FUNC_FLAG_SIMULATED.
+ Include a new function in the right place.
+
+2023-05-16 Tom de Vries <tdevries@suse.de>
+
+ [gdb/tui] Don't show line number for lines not in source file
+ Currently, for a source file containing only 5 lines, we also show line
+ numbers 6 and 7 if they're in scope of the source window:
+ ...
+ 0 +-compact-source.c----------------+
+ 1 |___3_{ |
+ 2 |___4_ return 0; |
+ 3 |___5_} |
+ 4 |___6_ |
+ 5 |___7_ |
+ 6 +---------------------------------+
+ ...
+
+ Fix this by not showing line numbers not in a source file, such that we have instead:
+ ...
+ 0 +-compact-source.c----------------+
+ 1 |___3_{ |
+ 2 |___4_ return 0; |
+ 3 |___5_} |
+ 4 | |
+ 5 | |
+ 6 +---------------------------------+
+ ...
+
+ Tested on x86_64-linux.
+
+ Suggested-By: Simon Marchi <simon.marchi@efficios.com>
+ Approved-By: Tom Tromey <tom@tromey.com>
+
+2023-05-16 Nick Clifton <nickc@redhat.com>
+
+ Document how to use the linker to create a resource only DLL.
+ PR 30359
+ * ld.texi (WIN32): Document how to create a resource only DLL.
+
+2023-05-16 Oleg Tolmatcev <oleg.tolmatcev@gmail.com>
+
+ Add section caches to coff_data_type
+ * libcoff-in.h (struct coff_tdata): Add section_by_index and section_by_target_index hash tables.
+ * libcoff.h: Regenerate.
+ * coffcode.h (htab_hash_section_index): New function. (htab_eq_section_index): New function. (htab_hash_section_target_index): New function. (htab_eq_section_target_index): New function. (coff_mkobject_hool): Create the hash tables.
+ * peicode.h: Add the same new functions. (pe_mkobject_hook): Create the hash tables.
+ * coff-x86_64.c (coff_amd64_rtype_to_howto): Use the new tables to speed up lookups.
+ * coffgen.c (coff_section_from_bfd_index): Likewise. (_bfd_coff_close_and_cleanup): Delete the hash tables.
+
+2023-05-16 Paul Pluzhnikov <ppluzhnikov@google.com>
+
+ Update comments for the gdb/24331 fix.
+ Approved-by: Andrew Burgess <aburgess@redhat.com>
+
+2023-05-16 Andrew Burgess <aburgess@redhat.com>
+
+ gdb/testsuite: fix formatting of gdb.python/py-disasm.py
+ Run black on gdb.python/py-disasm.py file and commit the changes.
+
+2023-05-16 Andrew Burgess <aburgess@redhat.com>
+
+ gdb/testsuite: make gdb_supported_languages a caching proc
+ Rewrite gdb_supported_languages as a caching proc that actually
+ queries GDB for the list of supported languages, rather than just
+ containing a hard-coded list of languages.
+
+ There's only one test that uses this proc right now,
+ gdb.python/py-function.exp, and that still passes after this change,
+ with no changes in the test names.
+
+2023-05-16 Nick Clifton <nickc@redhat.com>
+
+ -Ur option documentation
+ * ld.texi (-Ur): Clarify the actions of this option.
+
+2023-05-16 Andrew Burgess <aburgess@redhat.com>
+
+ gdb/testsuite: fix regressions in break-main-file-remove-fail.exp
+ After this commit:
+
+ commit a68f7e9844208ad8cd498f89b5100084ece7d0f6
+ Date: Tue May 9 10:28:42 2023 +0100
+
+ gdb/testsuite: extend special '^' handling to gdb_test_multiple
+
+ buildbot notified me of a regression on s390 in the test:
+
+ gdb.base/break-main-file-remove-fail.exp
+
+ the failure looks like this:
+
+ print /d ((int (*) (void *, size_t)) munmap) (16781312, 4096)
+ warning: Error removing breakpoint 0
+ $2 = 0
+ (gdb) FAIL: gdb.base/break-main-file-remove-fail.exp: cmdline: get integer valueof "((int (*) (void *, size_t)) munmap) (16781312, 4096)"
+
+ On the mailing list it has been reported that this failure also
+ impacts arm, aarch64, and possibly ppc/ppc64 too.
+
+ The above commit changed get_integer_valueof so that no output is
+ expected between the command and the '$2 = 0' line. In this case the
+ 'warning: Error removing breakpoint 0' output is causing the
+ get_integer_valueof call to fail.
+
+ The reason for this warning is that this test deliberately calls
+ munmap on a page of the inferior's code. The test is checking that
+ GDB can handle the situation where a s/w breakpoint can't be
+ removed (due to the page no longer being readable/writable).
+
+ The test that is supposed to trigger the warning is later in the test
+ script when we delete a breakpoint.
+
+ So why do some targets trigger the warning earlier during the inferior
+ call?
+
+ The impacted targets use AT_ENTRY_POINT as their strategy for handling
+ inferior calls, that is, the trampoline that calls the inferior
+ function is placed at the program's entry point, e.g. often the _start
+ label.
+
+ If this location happens to be on the same page as the page that the
+ test script unmaps then, when the inferior function call returns, GDB
+ will not be able to remove the temporary breakpoint that is inserted
+ to catch the inferior function call returning! As a result we end up
+ seeing the warning earlier than expected.
+
+ I did wonder if this means I should relax the pattern in
+ get_integer_valueof - just accept that there might be additional
+ output from GDB which we should ignore.
+
+ However, I don't think this the right way to go. With the change in
+ a68f7e984420 we are now stricter for GDB emitting additional,
+ unexpected, output, and I think that is a good thing.
+
+ So, I think, in this case, in order to handle the possible extra
+ output, we should implement something like get_integer_valueof
+ directly in the gdb.base/break-main-file-remove-fail.exp test script.
+ This local version will handle the possible warning output.
+
+ After this the test should pass again on the impacted targets.
+
+2023-05-16 Andrew Burgess <aburgess@redhat.com>
+
+ gdb/python: extend the Python Disassembler API to allow for styling
+ This commit extends the Python Disassembler API to allow for styling
+ of the instructions.
+
+ Before this commit the Python Disassembler API allowed the user to do
+ two things:
+
+ - They could intercept instruction disassembly requests and return a
+ string of their choosing, this string then became the disassembled
+ instruction, or
+
+ - They could call builtin_disassemble, which would call back into
+ libopcode to perform the disassembly. As libopcode printed the
+ instruction GDB would collect these print requests and build a
+ string. This string was then returned from the builtin_disassemble
+ call, and the user could modify or extend this string as needed.
+
+ Neither of these approaches allowed for, or preserved, disassembler
+ styling, which is now available within libopcodes for many of the more
+ popular architectures GDB supports.
+
+ This commit aims to fill this gap. After this commit a user will be
+ able to do the following things:
+
+ - Implement a custom instruction disassembler entirely in Python
+ without calling back into libopcodes, the custom disassembler will
+ be able to return styling information such that GDB will display
+ the instruction fully styled. All of GDB's existing style
+ settings will affect how instructions coming from the Python
+ disassembler are displayed in the expected manner.
+
+ - Call builtin_disassemble and receive a result that represents how
+ libopcode would like the instruction styled. The user can then
+ adjust or extend the disassembled instruction before returning the
+ result to GDB. Again, the instruction will be styled as expected.
+
+ To achieve this I will add two new classes to GDB,
+ DisassemblerTextPart and DisassemblerAddressPart.
+
+ Within builtin_disassemble, instead of capturing the print calls from
+ libopcodes and building a single string, we will now create either a
+ text part or address part and store these parts in a vector.
+
+ The DisassemblerTextPart will capture a small piece of text along with
+ the associated style that should be used to display the text. This
+ corresponds to the disassembler calling
+ disassemble_info::fprintf_styled_func, or for disassemblers that don't
+ support styling disassemble_info::fprintf_func.
+
+ The DisassemblerAddressPart is used when libopcodes requests that an
+ address be printed, and takes care of printing the address and
+ associated symbol, this corresponds to the disassembler calling
+ disassemble_info::print_address_func.
+
+ These parts are then placed within the DisassemblerResult when
+ builtin_disassemble returns.
+
+ Alternatively, the user can directly create parts by calling two new
+ methods on the DisassembleInfo class: DisassembleInfo.text_part and
+ DisassembleInfo.address_part.
+
+ Having created these parts the user can then pass these parts when
+ initializing a new DisassemblerResult object.
+
+ Finally, when we return from Python to gdbpy_print_insn, one way or
+ another, the result being returned will have a list of parts. Back in
+ GDB's C++ code we walk the list of parts and call back into GDB's core
+ to display the disassembled instruction with the correct styling.
+
+ The new API lives in parallel with the old API. Any existing code
+ that creates a DisassemblerResult using a single string immediately
+ creates a single DisassemblerTextPart containing the entire
+ instruction and gives this part the default text style. This is also
+ what happens if the user calls builtin_disassemble for an architecture
+ that doesn't (yet) support libopcode styling.
+
+ This matches up with what happens when the Python API is not involved,
+ an architecture without disassembler styling support uses the old
+ libopcodes printing API (the API that doesn't pass style info), and
+ GDB just prints everything using the default text style.
+
+ The reason that parts are created by calling methods on
+ DisassembleInfo, rather than calling the class constructor directly,
+ is DisassemblerAddressPart. Ideally this part would only hold the
+ address which the part represents, but in order to support backwards
+ compatibility we need to be able to convert the
+ DisassemblerAddressPart into a string. To do that we need to call
+ GDB's internal print_address function, and to do that we need an
+ gdbarch.
+
+ What this means is that the DisassemblerAddressPart needs to take a
+ gdb.Architecture object at creation time. The only valid place a user
+ can pull this from is from the DisassembleInfo object, so having the
+ DisassembleInfo act as a factory ensures that the correct gdbarch is
+ passed over each time. I implemented both solutions (the one
+ presented here, and an alternative where parts could be constructed
+ directly), and this felt like the cleanest solution.
+
+ Reviewed-By: Eli Zaretskii <eliz@gnu.org>
+ Reviewed-By: Tom Tromey <tom@tromey.com>
+
+2023-05-16 Andrew Burgess <aburgess@redhat.com>
+
+ gdb/python: rework how the disassembler API reads the result object
+ This commit is a refactor ahead of the next change which will make
+ disassembler styling available through the Python API.
+
+ Unfortunately, in order to make the styling support available, I think
+ the easiest solution is to make a very small change to the existing
+ API.
+
+ The current API relies on returning a DisassemblerResult object to
+ represent each disassembled instruction. Currently GDB allows the
+ DisassemblerResult class to be sub-classed, which could mean that a
+ user tries to override the various attributes that exist on the
+ DisassemblerResult object.
+
+ This commit removes this ability, effectively making the
+ DisassemblerResult class final.
+
+ Though this is a change to the existing API, I'm hoping this isn't
+ going to cause too many issues:
+
+ - The Python disassembler API was only added in the previous release
+ of GDB, so I don't expect it to be widely used yet, and
+
+ - It's not clear to me why a user would need to sub-class the
+ DisassemblerResult type, I allowed it in the original patch
+ because at the time I couldn't see any reason to NOT allow it.
+
+ Having prevented sub-classing I can now rework the tail end of the
+ gdbpy_print_insn function; instead of pulling the results out of the
+ DisassemblerResult object by calling back into Python, I now cast the
+ Python object back to its C++ type (disasm_result_object), and access
+ the fields directly from there. In later commits I will be reworking
+ the disasm_result_object type in order to hold information about the
+ styled disassembler output.
+
+ The tests that dealt with sub-classing DisassemblerResult have been
+ removed, and a new test that confirms that DisassemblerResult can't be
+ sub-classed has been added.
+
+ Reviewed-By: Eli Zaretskii <eliz@gnu.org>
+ Reviewed-By: Tom Tromey <tom@tromey.com>
+
+2023-05-16 GDB Administrator <gdbadmin@sourceware.org>
+
+ Automatic date update in version.in
+
+2023-05-15 Tom Tromey <tom@tromey.com>
+
+ Correctly handle forward DIE references in scanner
+ The cooked index scanner has special code to handle forward DIE
+ references. However, a bug report lead to the discovery that this
+ code does not work -- the "deferred_entry::spec_offset" field is
+ written to but never used, i.e., the lookup is done using the wrong
+ key.
+
+ This patch fixes the bug and adds a regression test.
+
+ The test in the bug itself used a thread_local variable, which
+ provoked a failure at runtime. This test instead uses "maint print
+ objfiles" and then inspects to ensure that the entry in question has a
+ parent. This lets us avoid a clang dependency in the test.
+
+ Bug: https://sourceware.org/bugzilla/show_bug.cgi?id=30271
+
+2023-05-15 mengqinggang <mengqinggang@loongson.cn>
+
+ LoongArch: Fix PLT entry generate bug
+ If a function symbol only get its address by la.global, without
+ directly called by bl instruction, the PLT entry is not required.
+
+ bfd/ChangeLog:
+
+ * elfnn-loongarch.c (loongarch_elf_adjust_dynamic_symbol): Fix PLT
+ entry generate bug.
+
+ ld/ChangeLog:
+
+ * testsuite/ld-elf/shared.exp: Clear xfail for LoongArch.
+
+2023-05-15 GDB Administrator <gdbadmin@sourceware.org>
+
+ Automatic date update in version.in
+
+2023-05-14 GDB Administrator <gdbadmin@sourceware.org>
+
+ Automatic date update in version.in
+
+2023-05-13 Paul Pluzhnikov <ppluzhnikov@google.com>
+
+ Fix bad interaction between element limit and repeated values (BZ#24331).
+ Currently
+
+ print -elements=3 -- "AAAAAA"
+
+ prints complete string, which is not what the user asked for.
+
+ Fix two buggy tests exposed by the fix, and add a new test.
+
+ Reviewed-by: Keith Seitz <keiths@redhat.com>
+
+2023-05-13 Alan Modra <amodra@gmail.com>
+
+ PR28955 mips gas segfault
+ Testing for NULL in pic_need_relax fixes the other call to this
+ function in md_estimate_size_before_relax.
+
+ PR 28955
+ * config/tc-mips.c (mips_frob_file): Move NULL sym test to..
+ (pic_need_relax): ..here.
+
+2023-05-13 Alan Modra <amodra@gmail.com>
+
+ PR28902, -T script with INSERT ordering
+ The answer to PR28902 may be deduced from the existing INSERT
+ documentation that says the default script is parsed after the -T
+ INSERT script, if you assume (correctly) that nothing special is done
+ when inserting into -T scripts overriding the default script. In both
+ cases INSERT handling looks for the specified output section later on
+ the internal list of parsed script commands. This isn't obvious
+ though, so make the ordering explicit, and mention that section
+ assignments are the same too.
+
+ PR 28902
+ * ld.texi (INSERT): Specify ordering when -T is used both to
+ override the default script and to augment.
+
+2023-05-13 GDB Administrator <gdbadmin@sourceware.org>
+
+ Automatic date update in version.in
+
+2023-05-12 Tom Tromey <tromey@adacore.com>
+
+ Fix regression due to Pragma Import series
+ A co-worker here at AdaCore discovered that the Pragma Import series
+ caused a rgression. When debugging gnat1, gdb started asking for
+ overload resolution like:
+
+ (gdb) call pp(n)
+ Multiple matches for pp
+ [0] cancel
+ [1] pp (types.union_id) at ../../gcc/gcc/ada/treepr.adb:511
+ [2] treepr.pp (types.union_id) at ../../gcc/gcc/ada/treepr.adb:511
+
+ This worked before the series, and is strange anyway, because the
+ matches refer to the same function.
+
+ This patch adds a test case for this situation and fixes the bug by
+ pruning identical functions in remove_extra_symbols.
+
+2023-05-12 Tom Tromey <tromey@adacore.com>
+
+ Use bool and early loop exit in remove_extra_symbols
+ This changes remove_extra_symbols to use bool rather than int, and
+ changes the nested loops to exit early when "remove_p" is set.
+
+ Use reference parameter in remove_extra_symbols
+ Changing ada-lang.c:remove_extra_symbols to take a reference parameter
+ makes the code a bit easier to read, by replacing "(*syms)" with plain
+ "syms".
+
+ Handle Ada Pragma Import and Pragma Export
+ Ada can import C APIs and also export Ada constructs to C via Pragma
+ Import and Pragma Export. This patch adds support for these to gdb,
+ by arranging to either defer some aspects of a symbol to the
+ underlying C symbol (for Import) or by introducing a second symbol
+ (for Export). A somewhat tricky approach is needed, both because gdb
+ doesn't generally handle symbol aliasing, and because Ada treats
+ symbol names in an unusual way (as compared to the rest of gdb).
+
+ Introduce symbol_block_ops::get_block_value
+ This adds a new callback to symbol_block_ops. This callback lets a
+ LOC_BLOCK symbol implement its own function to find the underlying
+ block.
+
+ Define symbol::value_block separately
+ This moves the definition of symbol::value_block outside of the class.
+ A subsequent patch will change this method to use SYMBOL_BLOCK_OPS,
+ and it seemed simplest to move this method out-of-line, and cleaner to
+ do this as a separate change.
+
+ Bump MAX_SYMBOL_IMPLS
+ A subsequent patch will introduce more aclass registrations, causing
+ the number to go over the current maximum. This bumps the number.
+ Note that there's a separate static assert that ensures that this
+ number doesn't get too large for the field size in the symbol.
+
+ Introduce lookup_minimal_symbol_linkage
+ This introduces a new function, lookup_minimal_symbol_linkage, and
+ refactors a couple other existing functions to call it. This function
+ will be used in a subsequent patch.
+
+2023-05-12 Simon Marchi <simon.marchi@efficios.com>
+
+ gdb: remove unnecessary call to std::string constructor
+ I spotted this explicit call to std::string, which creates an
+ unnecessary temporary extra std::string, while calling emplace_back.
+ I'm not sure if it has any impact in an optimized build, maybe the
+ compiler elides it. But still, it's unnecessary.
+
+ Change-Id: I873337ea91db29ac06267aff8fc12dcf52824cac
+ Approved-By: Tom Tromey <tom@tromey.com>
+
+2023-05-12 Tom Tromey <tromey@adacore.com>
+
+ Add dynamic_prop::is_constant
+ I noticed many spots checking whether a dynamic property's kind is
+ PROP_CONST. Some spots, I think, are doing a slightly incorrect check
+ -- checking for != PROP_UNDEFINED where == PROP_CONST is actually
+ required, the key thing being that const_val may only be called for
+ PROP_CONST properties.
+
+ This patch adds dynamic::is_constant and then updates these checks to
+ use it.
+
+ Regression tested on x86-64 Fedora 36.
+
+2023-05-12 Tom Tromey <tromey@adacore.com>
+
+ Implement DAP register scope
+ I noticed that gdb's DAP code did not provide a way to see register
+ values. DAP defines a "register" scope, which this patch implements.
+ This patch also adds the missing (and optional) "presentationHint" to
+ scopes.
+
+2023-05-12 Tom Tromey <tromey@adacore.com>
+
+ Fix calling debuginfo-less functions in Ada
+ A co-worker at AdaCore noticed that calling a function without
+ debuginfo yields:
+
+ (gdb) print plus_one(23)
+ 'pck.plus_one' has unknown return type; cast the call to its declared return type
+
+ However, this also happens if you follow the directions and add the
+ cast.
+
+ This patch fixes the problem and adds a regression test.
+
+2023-05-12 Andrew Burgess <aburgess@redhat.com>
+
+ gdb/python: implement DisassemblerResult.__str__ method
+ Add the DisassemblerResult.__str__ method. This gives the same result
+ as the DisassemblerResult.string attribute, but can be useful
+ sometimes depending on how the user is trying to print the object.
+
+ There's a test for the new functionality.
+
+2023-05-12 Andrew Burgess <aburgess@redhat.com>
+
+ gdb/python: implement __repr__ methods for py-disasm.c types
+ Add a __repr__ method for the DisassembleInfo and DisassemblerResult
+ types, and add some tests for these new methods.
+
+2023-05-12 Andrew Burgess <aburgess@redhat.com>
+
+ gdb/doc: improve Python Disassembler API documentation
+ Some small improvements to the Python Disassembler API documentation:
+
+ * Be consistent about using the package scope in the @deftp lines,
+
+ * Rework the description of the DisassemblerResult class to include
+ mention of builtin_disassemble.
+
+2023-05-12 Andrew Burgess <aburgess@redhat.com>
+
+ gdb/testsuite: extend special '^' handling to gdb_test_multiple
+ The commit:
+
+ commit 08ec06d6440745ef9204d39197aa1e732df41056
+ Date: Wed Mar 29 10:41:07 2023 +0100
+
+ gdb/testsuite: special case '^' in gdb_test pattern
+
+ Added some special handling of '^' to gdb_test -- a leading '^' will
+ cause the command regexp to automatically be included in the expected
+ output pattern.
+
+ It was pointed out that the '-wrap' flag of gdb_test_multiple is
+ supposed to work in the same way as gdb_test, and that the recent
+ changes for '^' had not been replicated for gdb_test_multiple. This
+ patch addresses this issue.
+
+ So, after this commit, the following two constructs should have the
+ same meaning:
+
+ gdb_test "command" "^output" "test name"
+
+ gdb_test_multiple "command" "test name" {
+ -re -wrap "^output" {
+ pass $gdb_test_name
+ }
+ }
+
+ In both cases the '^' will case gdb.exp to inject a regexp that
+ matches 'command' after the '^' and before the 'output', this is in
+ addition to adding the $gdb_prompt pattern after 'output' in the
+ normal way.
+
+ The special '^' handling is only applied when '-wrap' is used, as this
+ is the only mode that aims to mimic gdb_test.
+
+ While working on this patch I realised that I could actually improve
+ the logic for the special '^' handling in the case where the expected
+ output pattern is empty. I replicated these updates for both gdb_test
+ and gdb_test_multiple in order to keep these two paths in sync.
+
+ There were a small number of tests that needed adjustment after this
+ change, mostly just removing command regexps that are now added
+ automatically, but the gdb.base/settings.exp case was a little weird
+ as it turns out trying to match a single blank line is probably harder
+ now than it used to be -- still, I suspect this is a pretty rare case,
+ so I think the benefits (improved anchoring) outweigh this small
+ downside (IMHO).
+
+2023-05-12 Andrew Burgess <aburgess@redhat.com>
+
+ gdb: fix error message for $_gdb_maint_setting
+ I spotted this behaviour:
+
+ (gdb) p $_gdb_maint_setting("xxx")
+ First argument of $_gdb_maint_setting must be a valid setting of the 'show' command.
+
+ Notice that GDB claims I need to use a setting from the 'show'
+ command, which isn't correct for $_gdb_maint_setting, in this case I
+ need to use a setting from 'maintenance show'.
+
+ This same issue is present for $_gdb_maint_setting_str.
+
+ This commit fixes this minor issue.
+
+ Approved-By: Simon Marchi <simon.marchi@efficios.com>
+
+2023-05-12 Tom de Vries <tdevries@suse.de>
+
+ [gdb/testsuite] Fix gdb.dwarf2/opt-out-not-implptr.exp for -m32
+ When running test-case gdb.dwarf2/opt-out-not-implptr.exp with target board
+ unix/-m32 we have:
+ ...
+ (gdb) print noptr^M
+ $1 = {0, <optimized out>, <optimized out>, <optimized out>}^M
+ (gdb) FAIL: gdb.dwarf2/opt-out-not-implptr.exp: print noptr
+ ...
+
+ The problem happens when evaluating this dwarf expression:
+ ...
+ <45> DW_AT_location : 13 byte block: 10 86 ea d7 d0 96 8e cf 92 5c 9f 93 8 \
+ (DW_OP_constu: 6639779683436459270; DW_OP_stack_value; DW_OP_piece: 8)
+ ...
+
+ The DW_OP_constu pushes a value with "generic type" on to the DWARF stack, and
+ the "generic type" has the size of an address on the target machine, which for
+ target board unix/-m32 is 4 bytes. Consequently, the constant is abbreviated.
+
+ Next, the DW_OP_piece declares that the resulting 4-byte value is 8 bytes
+ large, and we hit this clause in rw_pieced_value:
+ ...
+ /* Use zeroes if piece reaches beyond stack value. */
+ if (p->offset + p->size > stack_value_size_bits)
+ break;
+ ...
+ and consequently get a zero.
+
+ We could just add require is_target_64 to the test-case, but instead, add a
+ 32-bit case and require is_target_64 just for the 64-bit case.
+
+ Tested on x86_64-linux.
+
+2023-05-12 Tom de Vries <tdevries@suse.de>
+
+ [gdb/testsuite] Make is_64_target more robust
+ I ran test-case gdb.dwarf2/opt-out-not-implptr.exp with make-check-all.sh, and
+ with target board dwarf64 ran into:
+ ...
+ FAIL: gdb.dwarf2/opt-out-not-implptr.exp: print noptr
+ ...
+ due to is_target_64 failing because of:
+ ...
+ builtin_spawn -ignore SIGHUP gcc -fno-stack-protector \
+ -fdiagnostics-color=never -w -c -gdwarf64 -g -o is_64_target.o \
+ is_64_target.c^M
+ gcc: error: '-gdwarf64' is ambiguous; use '-gdwarf-64' for DWARF version or \
+ '-gdwarf -g64' for debug level^M
+ compiler exited with status 1
+ ...
+
+ The FAIL is the same FAIL I run into with target board unix/-m32: is_target_64
+ fails for both cases.
+
+ The reason that is_target_64 is failing for target board dwarf64, is because
+ of using system compiler 7.5.0 which doesn't support -gdwarf64.
+
+ Fix this by making is_target_64 use nodebug instead of debug for compilation.
+
+ Tested on x86_64-linux.
+
+2023-05-12 Tom de Vries <tdevries@suse.de>
+
+ [gdb/cli] Fix wrapping for TERM=ansi
+ I. Auto-detected width (xterm vs. ansi)
+
+ Say we have a terminal with a width of 40 chars:
+ ...
+ $ echo $COLUMNS
+ 40
+ ...
+
+ With TERM=xterm, we report a width of 40 chars:
+ ...
+ $ TERM=xterm gdb
+ (gdb) show width
+ Number of characters gdb thinks are in a line is 40.
+ ...
+
+ And with TERM=ansi, a width of 39 chars:
+ ...
+ $ TERM=ansi gdb
+ (gdb) show width
+ Number of characters gdb thinks are in a line is 39.
+ ...
+
+ Gdb uses readline to auto-detect screen size, and readline decides in the
+ TERM=ansi case that the terminal does not have reliable auto-wrap, and
+ consequently decides to hide the last terminal column from the readline user
+ (in other words GDB), hence we get 39 instead of 40.
+
+ II. Types of wrapping
+
+ Looking a bit more in detail inside gdb, it seems there are two types of
+ wrapping:
+ - readline wrapping (in other words, prompt edit wrapping), and
+ - gdb output wrapping (can be observed by issuing "info sources").
+ This type of wrapping attempts to wrap some of the gdb output earlier
+ than the indicated width, to not break lines in inconvenient places.
+
+ III. Readline wrapping, auto-detected screen size
+
+ Let's investigate readline wrapping with the auto-detected screen widths.
+
+ First, let's try with xterm:
+ ...
+ $ TERM=xterm gdb
+ (gdb) 7890123456789012345678901234567890
+ 123
+ ...
+ That looks as expected, wrapping occurs after 40 chars.
+
+ Now, let's try with ansi:
+ ...
+ $ TERM=ansi gdb
+ (gdb) 78901234567890123456789012345678
+ 90123
+ ...
+ It looks like wrapping occurred after 38, while readline should be capable of
+ wrapping after 39 chars.
+
+ This is caused by readline hiding the last column, twice.
+
+ In more detail:
+ - readline detects the screen width: 40,
+ - readline hides the last column, setting the readline screen width to 39,
+ - readline reports 39 to gdb as screen width,
+ - gdb sets its width setting to 39,
+ - gdb sets readline screen width to 39,
+ - readline hides the last column, again, setting the readline screen width to
+ 38.
+
+ This is reported as PR cli/30346.
+
+ IV. gdb output wrapping, auto-detected screen size
+
+ Say we set the terminal width to 56. With TERM=xterm, we have:
+ ...
+ /home/abuild/rpmbuild/BUILD/glibc-2.31/csu/elf-init.c,
+ /data/vries/hello.c,
+ ...
+ but with TERM=ansi:
+ ...
+ /home/abuild/rpmbuild/BUILD/glibc-2.31/csu/elf-init.c, /
+ data/vries/hello.c,
+ ...
+
+ So what happened here? With TERM=ansi, the width setting is auto-detected to
+ 55, and gdb assumes the terminal inserts a line break there, which it doesn't
+ because the terminal width is 56.
+
+ This is reported as PR cli/30411.
+
+ V. Fix PRs
+
+ Fix both mentioned PRs by taking into account the hidden column when readline
+ reports the screen width in init_page_info, and updating chars_per_line
+ accordingly.
+
+ Note that now we report the same width for both TERM=xterm and TERM=ansi,
+ which is much clearer.
+
+ The point where readline respectively expects or ensures wrapping is still
+ indicated by "maint info screen", for xterm:
+ ...
+ Number of characters readline reports are in a line is 40.
+ ...
+ and ansi:
+ ...
+ Number of characters readline reports are in a line is 39.
+ ...
+
+ VI. Testing
+
+ PR cli/30346 is covered by existing regression tests gdb.base/wrap-line.exp
+ and gdb.tui/wrap-line.exp, so remove the KFAILs there.
+
+ I didn't manage to come up with a regression test for PR cli/30411. Perhaps
+ that would be easier if we had a maintenance command that echoes its arguments
+ while applying gdb output wrapping.
+
+ Tested on x86_64-linux.
+
+ PR cli/30346
+ PR cli/30411
+ Bug: https://sourceware.org/bugzilla/show_bug.cgi?id=30346
+ Bug: https://sourceware.org/bugzilla/show_bug.cgi?id=30411
+
+2023-05-12 Jan Beulich <jbeulich@suse.com>
+
+ x86: move a few more disassembler helper functions
+ ... such that they wouldn't need forward declarations anymore. Note that
+ append_seg() already was suitably placed.
+
+ x86: move get<N>() disassembler helper functions
+ ... such that none of them would need forward declarations anymore.
+
+ x86: slightly simplify i386_parse_name()
+ With the switch to parse_real_register() (commit 4faaa10f3fab) "bad_reg"
+ cannot come back anymore. Drop the respective check.
+
+2023-05-12 Jan Beulich <jbeulich@suse.com>
+
+ gas: equates of registers
+ There are two problems: symbol_equated_p() doesn't recognize equates of
+ registers, and S_CAN_BE_REDEFINED() goes by section rather than by
+ expression type. Both together undermine .eqv and .equiv clearly meaning
+ to guard the involved symbols against re-definition (both ways).
+
+ To compensate pseudo_set() now using O_symbol and S_CAN_BE_REDEFINED()
+ now checking for O_register,
+ - for targets creating register symbols through symbol_{new,create}() ->
+ symbol_init() -> S_SET_VALUE() (alpha, arc, dlx, ia64, m68k, mips,
+ mmix, tic4x, tic54x, plus anything using cgen or itbl-ops), have
+ symbol_init() set their expressions to O_register,
+ - x86'es parse_register() also can't go by section anymore when
+ trying to "look through" equates; probably symbol_equated_p() should
+ have been used there from the beginning, if only that had worked for
+ equates of registers,
+ - various targets need to "look through" equates when parsing insn
+ operands (which also helps transitive forward equates); perhaps even
+ more ought to, but many don't look to consider the possibility of
+ register equates in the first place.
+
+ This was uncovered by code reported in PR gas/30274 (duplicating
+ PR gas/30272), except that there .eqv was used when really .equ was
+ meant. Therefore that bug report is addressed here only in so far as
+ gas wouldn't crash anymore; the code there still won't assemble
+ successfully, just that now the issues there are properly diagnosed.
+
+2023-05-12 GDB Administrator <gdbadmin@sourceware.org>
+
+ Automatic date update in version.in
+
+2023-05-11 Tom Tromey <tom@tromey.com>
+
+ Do not print <synthetic pointer> when piece is optimized out
+ A user reported a bug where printing a certain array of integer types
+ would result in the nonsensical:
+
+ (gdb) p l_126
+ $1 = {6639779683436459270, <synthetic pointer>, <synthetic pointer>, <synthetic pointer>}
+
+ I tracked this down to some issues in the DWARF expression code.
+ First, check_pieced_synthetic_pointer did not account for the
+ situation where a location expression does not describe all the bits
+ of a value -- in this case it returned true, meaning there is a
+ synthetic pointer, but in fact these bits are optimized out. (It
+ turns out this incorrect output had already been erroneously tested
+ for as well.)
+
+ Next, rw_pieced_value did not mark these bits as optimized-out,
+ either.
+
+ Bug: https://sourceware.org/bugzilla/show_bug.cgi?id=30296
+
+2023-05-11 Aaron Merey <amerey@redhat.com>
+
+ gdb/testsuite: Match file size in gdb.debuginfod/crc_mismatch.exp
+ gdb's debuginfod progress messages include the size of the file being
+ downloaded if the size information is available at the time the message
+ is printed. For example:
+
+ Downloading 10 MB separate debug info for /lib64/libxyz.so
+
+ This size information is omitted if it's not available at the time of
+ printing:
+
+ Downloading separate debug info for /lib64/libxyz.so
+
+ A pattern in crc_mismatch.exp fails to be matched if a progress message
+ includes a file size. Add a wildcard to the pattern so that it matches
+ the progress message whether or not it includes the file size.
+
+2023-05-11 Johnson Sun <j3.soon777@gmail.com>
+
+ Disable out-of-scope watchpoints
+ Currently, when a local software watchpoint goes out of scope, GDB sets
+ the watchpoint's disposition to `delete at next stop' and then normal
+ stops (i.e., stop and wait for the next GDB command). When GDB normal
+ stops, it automatically deletes the breakpoints with their disposition
+ set to `delete at next stop'.
+
+ Suppose a Python script decides not to normal stop when a local
+ software watchpoint goes out of scope, the watchpoint will not be
+ automatically deleted even when its disposition is set to
+ `delete at next stop'.
+
+ Since GDB single-steps the program and tests the watched expression
+ after each instruction, not deleting the watchpoint causes the
+ watchpoint to be hit many more times than it should, as reported in
+ PR python/29603.
+
+ This was happening because the watchpoint is not deleted or disabled
+ when going out of scope.
+
+ This commit fixes this issue by disabling the watchpoint when going out
+ of scope. It also adds a test to ensure this feature isn't regressed in
+ the future.
+
+ Calling `breakpoint_auto_delete' on all kinds of stops (in
+ `fetch_inferior_event') seem to solve this issue, but is in fact
+ inappropriate, since `breakpoint_auto_delete' goes over all breakpoints
+ instead of just going through the bpstat chain (which only contains the
+ breakpoints that were hit right now).
+
+ Bug: https://sourceware.org/bugzilla/show_bug.cgi?id=29603
+ Change-Id: Ia85e670b2bcba2799219abe4b6be3b582387e383
+
+2023-05-11 Tom Tromey <tromey@adacore.com>
+
+ Add "scheduler-locking" to documentation index
+ I noticed that "scheduler-locking" does not appear in the index of the
+ gdb manual. This patch corrects this oversight.
+
+2023-05-11 Joseph Myers <joseph@codesourcery.com>
+
+ Add LDPT_REGISTER_CLAIM_FILE_HOOK_V2 linker plugin hook [GCC PR109128]
+ This is one part of the fix for GCC PR109128, along with a
+ corresponding GCC change. Without this patch, what happens in the
+ linker, when an unused object in a .a file has offload data, is that
+ elf_link_is_defined_archive_symbol calls bfd_link_plugin_object_p,
+ which ends up calling the plugin's claim_file_handler, which then
+ records the object as one with offload data. That is, the linker never
+ decides to use the object in the first place, but use of this _p
+ interface (called as part of trying to decide whether to use the
+ object) results in the plugin deciding to use its offload data (and a
+ consequent mismatch in the offload data present at runtime).
+
+ The new hook allows the linker plugin to distinguish calls to
+ claim_file_handler that know the object is being used by the linker
+ (from ldmain.c:add_archive_element), from calls that don't know it's
+ being used by the linker (from elf_link_is_defined_archive_symbol); in
+ the latter case, the plugin should avoid recording the object as one
+ with offload data.
+
+ bfd/
+ * plugin.c (struct plugin_list_entry): Add claim_file_v2.
+ (register_claim_file_v2): New.
+ (try_load_plugin): Use LDPT_REGISTER_CLAIM_FILE_HOOK_V2.
+ (ld_plugin_object_p): Take second argument.
+ (bfd_link_plugin_object_p): Update call to ld_plugin_object_p.
+ (register_ld_plugin_object_p): Update argument prototype.
+ (bfd_plugin_object_p): Update call to ld_plugin_object_p.
+ * plugin.h (register_ld_plugin_object_p): Update argument
+ prototype.
+
+ include/
+ * plugin.api.h (ld_plugin_claim_file_handler_v2)
+ (ld_plugin_register_claim_file_v2)
+ (LDPT_REGISTER_CLAIM_FILE_HOOK_V2): New.
+ (struct ld_plugin_tv): Add tv_register_claim_file_v2.
+
+ ld/
+ * plugin.c (struct plugin): Add claim_file_handler_v2.
+ (LDPT_REGISTER_CLAIM_FILE_HOOK_V2): New.
+ (plugin_object_p): Add second argument. Update call to
+ plugin_call_claim_file.
+ (register_claim_file_v2): New.
+ (set_tv_header): Handle LDPT_REGISTER_CLAIM_FILE_HOOK_V2.
+ (plugin_call_claim_file): Add argument known_used.
+ (plugin_maybe_claim): Update call to plugin_object_p.
+ * testplug.c, testplug2.c, testplug3.c, testplug4.c: Handle
+ LDPT_REGISTER_CLAIM_FILE_HOOK_V2.
+ * testsuite/ld-plugin/plugin-1.d, testsuite/ld-plugin/plugin-10.d,
+ testsuite/ld-plugin/plugin-11.d, testsuite/ld-plugin/plugin-13.d,
+ testsuite/ld-plugin/plugin-14.d, testsuite/ld-plugin/plugin-15.d,
+ testsuite/ld-plugin/plugin-16.d, testsuite/ld-plugin/plugin-17.d,
+ testsuite/ld-plugin/plugin-18.d, testsuite/ld-plugin/plugin-19.d,
+ testsuite/ld-plugin/plugin-2.d, testsuite/ld-plugin/plugin-26.d,
+ testsuite/ld-plugin/plugin-3.d, testsuite/ld-plugin/plugin-30.d,
+ testsuite/ld-plugin/plugin-4.d, testsuite/ld-plugin/plugin-5.d,
+ testsuite/ld-plugin/plugin-6.d, testsuite/ld-plugin/plugin-7.d,
+ testsuite/ld-plugin/plugin-8.d, testsuite/ld-plugin/plugin-9.d:
+ Update test expectations.
+
+2023-05-11 GDB Administrator <gdbadmin@sourceware.org>
+
+ Automatic date update in version.in
+
+2023-05-10 Tom de Vries <tdevries@suse.de>
+
+ [gdb/tui] Fix tui compact-source a bit more
+ Andrew pointed out that the behaviour as tested in gdb.tui/compact-source.exp
+ is incorrect:
+ ...
+ 0 +-compact-source.c--------------------------------------------------------+
+ 1 |___3_{ |
+ 2 |___4_ return 0; |
+ 3 |___5_} |
+ 4 |___6_ |
+ 5 |___7_ |
+ 6 |___8_ |
+ 7 |___9_ |
+ 8 +-------------------------------------------------------------------------+
+ ...
+
+ The last line number in the source file is 5, and there are 7 lines to display
+ source lines, so if we'd scroll all the way down, the first line number in the
+ source window would be 5, and the last one would be 11.
+
+ To represent 11 we'd need 2 digits, so we expect to see ___04_ here instead of
+ ___4_, even though all line numbers currently in the src window (3-9) can be
+ represented with only 1 digit.
+
+ Fix this in tui_source_window::set_contents, by updating the computation of
+ max_line_nr:
+ ...
+ - int max_line_nr = std::max (lines_in_file, last_line_nr_in_window);
+ + int max_line_nr = lines_in_file + nlines - 1;
+ ...
+
+ Tested on x86_64-linux.
+
+ Co-Authored-By: Andrew Burgess <aburgess@redhat.com>
+ Approved-By: Tom Tromey <tom@tromey.com>
+
+2023-05-10 Andrew Burgess <aburgess@redhat.com>
+
+ gdb/rust: fix crash for expression debug with strings
+ While working on another patch I did this:
+
+ (gdb) set debug expression 1
+ (gdb) set language rust
+ (gdb) p "foo"
+ Operation: OP_AGGREGATE
+ Type: &str
+
+ Fatal signal: Segmentation fault
+ ... etc ...
+
+ The problem is that the second field of the rust_aggregate_operation
+ is created as a nullptr, this can be seen in rust-parse.c. in the
+ function rust_parser::parse_string().
+
+ However, in expop.h, in the function dump_for_expression, we make the
+ assumption that the expressions will never be nullptr.
+
+ I did consider moving the nullptr handling into a new function
+ rust_aggregate_operation::dump, however, as the expression debug
+ dumping code is not exercised as much as it might be, I would rather
+ that this code be hardened and able to handle a nullptr without
+ crashing, so I propose that we add nullptr handling into the general
+ dump_for_expression function. The behaviour is now:
+
+ (gdb) set debug expression 1
+ (gdb) set language rust
+ (gdb) p "foo"
+ Operation: OP_AGGREGATE
+ Type: &str
+ nullptr
+ Vector:
+ String: data_ptr
+ Operation: UNOP_ADDR
+ Operation: OP_STRING
+ String: foo
+ String: length
+ Operation: OP_LONG
+ Type: usize
+ Constant: 3
+ evaluation of this expression requires the target program to be active
+ (gdb)
+
+ There's a new test to check for this case.
+
+ Reviewed-By: Tom Tromey <tom@tromey.com>
+
+2023-05-10 Alan Modra <amodra@gmail.com>
+
+ Re: stack overflow in debug_write_type
+ Apparently u.kindirect->slot can point at a NULL.
+
+ * debug.c (debug_write_type): Don't segfault on NULL indirect.
+
+2023-05-10 Luca Bonissi <gcc@scarsita.it>
+
+ or1k relocation truncated to fit: R_OR1K_GOT16 even when using -mcmodel=large
+ PR 30422
+ * elf32-or1k.c (or1k_elf_relocate_section): Prescan for R_OR1K_GOT_AHI16 relocs as they may occur after R_OR1K_GOT16 relocs.
+
+2023-05-10 Nick Clifton <nickc@redhat.com>
+
+ Add linker option to include local symbols in the linker map.
+ PR 16566
+ * ldlang.c (ld_is_local_symbol): New function. (print_input_section): Add code to display local symbols in the section.
+ * ldlex.h (enum option_values): Add OPTION_PRINT_MAP_LOCALS and OPTION_PRINT_MAP_LOCALS.
+ * lexsup.c (ld_options[]): Add entries for --print-map-locals and --no-print-map-locals.
+ * NEWS: Mention the new feature.
+ * ld.h (struct ld_config_type): Add print_map_locals field.
+ * ld.texi: Document the new command line option.
+ * testsuite/ld-scripts/sizeof.s: Add a local symbol.
+ * testsuite/ld-scripts/map-locals.d: New test control file.
+ * testsuite/ld-scripts/map-address.exp: Run the new test.
+
+2023-05-10 Tom de Vries <tdevries@suse.de>
+
+ [gdb/tui] Fix tui compact-source
+ Consider a hello.c, with less than 10 lines:
+ ...
+ $ wc -l hello.c
+ 8 hello.c
+ ...
+ and compiled with -g into an a.out.
+
+ With compact-source off:
+ ...
+ $ gdb -q a.out \
+ -ex "set tui border-kind ascii" \
+ -ex "maint set tui-left-margin-verbose on" \
+ -ex "set tui compact-source off" \
+ -ex "tui enable"
+ ...
+ we get:
+ ...
+ +-./data/hello.c-----------------------+
+ |___000005_{ |
+ |___000006_ printf ("hello\n"); |
+ |___000007_ return 0; |
+ |___000008_} |
+ |___000009_ |
+ |___000010_ |
+ |___000011_ |
+ ...
+ but with compact-source on:
+ ...
+ +-./data/hello.c-----------------------+
+ |___5{ |
+ |___6 printf ("hello\n"); |
+ |___7 return 0; |
+ |___8} |
+ |___9 |
+ |___1 |
+ |___1 |
+ ...
+
+ There are a couple of problems with compact-source.
+
+ First of all the documentation mentions:
+ ...
+ The default display uses more space for line numbers and starts the
+ source text at the next tab stop; the compact display uses only as
+ much space as is needed for the line numbers in the current file, and
+ only a single space to separate the line numbers from the source.
+ ...
+
+ The bit about the default display and the next tab stop looks incorrect. The
+ source doesn't start at a tab stop, instead it uses a single space to separate
+ the line numbers from the source.
+
+ Then the documentation mentions that there's single space in the compact
+ display, but evidently that's missing.
+
+ Then there's the fact that the line numbers "10" and "11" are both abbreviated
+ to "1" in the compact case.
+
+ The abbreviation is due to allocating space for <lines in source>, which is
+ 8 for this example, and takes a single digit. The line numbers though
+ continue past the end of the file, so fix this by allocating space for
+ max (<lines in source>, <last line in window>), which in this example takes 2
+ digits.
+
+ The missing space is due to some confusion about what the "1" here in
+ tui_source_window::set_contents represent:
+ ...
+ double l = log10 ((double) offsets->size ());
+ m_digits = 1 + (int) l;
+ ...
+
+ It could be the trailing space that's mentioned in tui-source.h:
+ ...
+ /* How many digits to use when formatting the line number. This
+ includes the trailing space. */
+ int m_digits;
+ ...
+
+ Then again, it could be part of the calculation for the number of digits
+ needed for printing. With this minimal example:
+ ...
+ int main () {
+ for (int i = 8; i <= 11; ++i) {
+ double l = log10 ((double) i);
+ printf ("%d %d\n", i, (int)l);
+ }
+ return 0;
+ }
+ ...
+ we get:
+ ...
+ $ ./a.out
+ 8 0
+ 9 0
+ 10 1
+ 11 1
+ ...
+ which shows that the number of digits needed for printing i is
+ "1 + (int)log10 ((double) i)".
+
+ Fix this by introducing named variables needed_digits and trailing_space, each
+ adding 1.
+
+ With the fixes, we get for compact-source on:
+ ...
+ +-./data/hello.c-----------------------+
+ |___05_{ |
+ |___06_ printf ("hello\n"); |
+ |___07_ return 0; |
+ |___08_} |
+ |___09_ |
+ |___10_ |
+ |___11_ |
+ |...
+
+ Also fix the documentation and help text to actually match effect of
+ compact-source.
+
+ Tested on x86_64-linux.
+
+2023-05-10 GDB Administrator <gdbadmin@sourceware.org>
+
+ Automatic date update in version.in
+
+2023-05-09 Dan Callaghan <dan.callaghan@morsemicro.com>
+
+ Support higher baud rates when they are defined
+ On Linux at least, baud rate codes are defined up to B4000000. Allow the
+ user to select them if they are present in the system headers.
+
+ Change-Id: I393ff32e4a4b6127bdf97e3306ad5b6ebf7c934e
+
+2023-05-09 Simon Marchi <simon.marchi@efficios.com>
+
+ gdb: fix use-after-free in check_longjmp_breakpoint_for_call_dummy
+ Commit 7a8de0c33019 ("Remove ALL_BREAKPOINTS_SAFE") introduced a
+ use-after-free in the breakpoints iterations (see below for full ASan
+ report). This makes gdb.base/stale-infcall.exp fail when GDB is build
+ with ASan.
+
+ check_longjmp_breakpoint_for_call_dummy iterates on all breakpoints,
+ possibly deleting the current breakpoint as well as related breakpoints.
+ The problem arises when a breakpoint in the B->related_breakpoint chain
+ is also B->next. In that case, deleting that related breakpoint frees
+ the breakpoint that all_breakpoints_safe has saved.
+
+ The old code worked around that by manually changing B_TMP, which was
+ the next breakpoint saved by the "safe iterator":
+
+ while (b->related_breakpoint != b)
+ {
+ if (b_tmp == b->related_breakpoint)
+ b_tmp = b->related_breakpoint->next;
+ delete_breakpoint (b->related_breakpoint);
+ }
+
+ (Note that this seemed to assume that b->related_breakpoint->next was
+ the same as b->next->next, not sure this is guaranteed.)
+
+ The new code kept the B_TMP variable, but it's not useful in that
+ context. We can't go change the next breakpoint as saved by the safe
+ iterator, like we did before. I suggest fixing that by saving the
+ breakpoints to delete in a map and deleting them all at the end.
+
+ Here's the full ASan report:
+
+ (gdb) PASS: gdb.base/stale-infcall.exp: continue to breakpoint: break-run1
+ print infcall ()
+ =================================================================
+ ==47472==ERROR: AddressSanitizer: heap-use-after-free on address 0x611000034980 at pc 0x563f7012c7bc bp 0x7ffdf3804d70 sp 0x7ffdf3804d60
+ READ of size 8 at 0x611000034980 thread T0
+ #0 0x563f7012c7bb in next_iterator<breakpoint>::operator++() /home/smarchi/src/binutils-gdb/gdb/../gdbsupport/next-iterator.h:66
+ #1 0x563f702ce8c0 in basic_safe_iterator<next_iterator<breakpoint> >::operator++() /home/smarchi/src/binutils-gdb/gdb/../gdbsupport/safe-iterator.h:84
+ #2 0x563f7021522a in check_longjmp_breakpoint_for_call_dummy(thread_info*) /home/smarchi/src/binutils-gdb/gdb/breakpoint.c:7611
+ #3 0x563f714567b1 in process_event_stop_test /home/smarchi/src/binutils-gdb/gdb/infrun.c:6881
+ #4 0x563f71454e07 in handle_signal_stop /home/smarchi/src/binutils-gdb/gdb/infrun.c:6769
+ #5 0x563f7144b680 in handle_inferior_event /home/smarchi/src/binutils-gdb/gdb/infrun.c:6023
+ #6 0x563f71436165 in fetch_inferior_event() /home/smarchi/src/binutils-gdb/gdb/infrun.c:4387
+ #7 0x563f7136ff51 in inferior_event_handler(inferior_event_type) /home/smarchi/src/binutils-gdb/gdb/inf-loop.c:42
+ #8 0x563f7168038d in handle_target_event /home/smarchi/src/binutils-gdb/gdb/linux-nat.c:4219
+ #9 0x563f72fccb6d in handle_file_event /home/smarchi/src/binutils-gdb/gdbsupport/event-loop.cc:573
+ #10 0x563f72fcd503 in gdb_wait_for_event /home/smarchi/src/binutils-gdb/gdbsupport/event-loop.cc:694
+ #11 0x563f72fcaf2b in gdb_do_one_event(int) /home/smarchi/src/binutils-gdb/gdbsupport/event-loop.cc:217
+ #12 0x563f7262b9bb in wait_sync_command_done() /home/smarchi/src/binutils-gdb/gdb/top.c:426
+ #13 0x563f7137a7c3 in run_inferior_call /home/smarchi/src/binutils-gdb/gdb/infcall.c:650
+ #14 0x563f71381295 in call_function_by_hand_dummy(value*, type*, gdb::array_view<value*>, void (*)(void*, int), void*) /home/smarchi/src/binutils-gdb/gdb/infcall.c:1332
+ #15 0x563f7137c0e2 in call_function_by_hand(value*, type*, gdb::array_view<value*>) /home/smarchi/src/binutils-gdb/gdb/infcall.c:780
+ #16 0x563f70fe5960 in evaluate_subexp_do_call(expression*, noside, value*, gdb::array_view<value*>, char const*, type*) /home/smarchi/src/binutils-gdb/gdb/eval.c:649
+ #17 0x563f70fe6617 in expr::operation::evaluate_funcall(type*, expression*, noside, char const*, std::__debug::vector<std::unique_ptr<expr::operation, std::default_delete<expr::operation> >, std::allocator<std::unique_ptr<expr::operation, std::default_delete<expr::operation> > > > const&) /home/smarchi/src/binutils-gdb/gdb/eval.c:677
+ #18 0x563f6fd19668 in expr::operation::evaluate_funcall(type*, expression*, noside, std::__debug::vector<std::unique_ptr<expr::operation, std::default_delete<expr::operation> >, std::allocator<std::unique_ptr<expr::operation, std::default_delete<expr::operation> > > > const&) /home/smarchi/src/binutils-gdb/gdb/expression.h:136
+ #19 0x563f70fe6bba in expr::var_value_operation::evaluate_funcall(type*, expression*, noside, std::__debug::vector<std::unique_ptr<expr::operation, std::default_delete<expr::operation> >, std::allocator<std::unique_ptr<expr::operation, std::default_delete<expr::operation> > > > const&) /home/smarchi/src/binutils-gdb/gdb/eval.c:689
+ #20 0x563f704b71dc in expr::funcall_operation::evaluate(type*, expression*, noside) /home/smarchi/src/binutils-gdb/gdb/expop.h:2219
+ #21 0x563f70fe0f02 in expression::evaluate(type*, noside) /home/smarchi/src/binutils-gdb/gdb/eval.c:110
+ #22 0x563f71b1373e in process_print_command_args /home/smarchi/src/binutils-gdb/gdb/printcmd.c:1319
+ #23 0x563f71b1391b in print_command_1 /home/smarchi/src/binutils-gdb/gdb/printcmd.c:1332
+ #24 0x563f71b147ec in print_command /home/smarchi/src/binutils-gdb/gdb/printcmd.c:1465
+ #25 0x563f706029b8 in do_simple_func /home/smarchi/src/binutils-gdb/gdb/cli/cli-decode.c:95
+ #26 0x563f7061972a in cmd_func(cmd_list_element*, char const*, int) /home/smarchi/src/binutils-gdb/gdb/cli/cli-decode.c:2735
+ #27 0x563f7262d0ef in execute_command(char const*, int) /home/smarchi/src/binutils-gdb/gdb/top.c:572
+ #28 0x563f7100ed9c in command_handler(char const*) /home/smarchi/src/binutils-gdb/gdb/event-top.c:543
+ #29 0x563f7101014b in command_line_handler(std::unique_ptr<char, gdb::xfree_deleter<char> >&&) /home/smarchi/src/binutils-gdb/gdb/event-top.c:779
+ #30 0x563f72777942 in tui_command_line_handler /home/smarchi/src/binutils-gdb/gdb/tui/tui-interp.c:104
+ #31 0x563f7100d059 in gdb_rl_callback_handler /home/smarchi/src/binutils-gdb/gdb/event-top.c:250
+ #32 0x7f5a80418246 in rl_callback_read_char (/usr/lib/libreadline.so.8+0x3b246) (BuildId: 092e91fc4361b0ef94561e3ae03a75f69398acbb)
+ #33 0x563f7100ca06 in gdb_rl_callback_read_char_wrapper_noexcept /home/smarchi/src/binutils-gdb/gdb/event-top.c:192
+ #34 0x563f7100cc5e in gdb_rl_callback_read_char_wrapper /home/smarchi/src/binutils-gdb/gdb/event-top.c:225
+ #35 0x563f728c70db in stdin_event_handler /home/smarchi/src/binutils-gdb/gdb/ui.c:155
+ #36 0x563f72fccb6d in handle_file_event /home/smarchi/src/binutils-gdb/gdbsupport/event-loop.cc:573
+ #37 0x563f72fcd503 in gdb_wait_for_event /home/smarchi/src/binutils-gdb/gdbsupport/event-loop.cc:694
+ #38 0x563f72fcb15c in gdb_do_one_event(int) /home/smarchi/src/binutils-gdb/gdbsupport/event-loop.cc:264
+ #39 0x563f7177ec1c in start_event_loop /home/smarchi/src/binutils-gdb/gdb/main.c:412
+ #40 0x563f7177f12e in captured_command_loop /home/smarchi/src/binutils-gdb/gdb/main.c:476
+ #41 0x563f717846e4 in captured_main /home/smarchi/src/binutils-gdb/gdb/main.c:1320
+ #42 0x563f71784821 in gdb_main(captured_main_args*) /home/smarchi/src/binutils-gdb/gdb/main.c:1339
+ #43 0x563f6fcedfbd in main /home/smarchi/src/binutils-gdb/gdb/gdb.c:32
+ #44 0x7f5a7e43984f (/usr/lib/libc.so.6+0x2384f) (BuildId: 2f005a79cd1a8e385972f5a102f16adba414d75e)
+ #45 0x7f5a7e439909 in __libc_start_main (/usr/lib/libc.so.6+0x23909) (BuildId: 2f005a79cd1a8e385972f5a102f16adba414d75e)
+ #46 0x563f6fcedd84 in _start (/home/smarchi/build/binutils-gdb/gdb/gdb+0xafb0d84) (BuildId: 50bd32e6e9d5e84543e9897b8faca34858ca3995)
+
+ 0x611000034980 is located 0 bytes inside of 208-byte region [0x611000034980,0x611000034a50)
+ freed by thread T0 here:
+ #0 0x7f5a7fce312a in operator delete(void*, unsigned long) /usr/src/debug/gcc/gcc/libsanitizer/asan/asan_new_delete.cpp:164
+ #1 0x563f702bd1fa in momentary_breakpoint::~momentary_breakpoint() /home/smarchi/src/binutils-gdb/gdb/breakpoint.c:304
+ #2 0x563f702771c5 in delete_breakpoint(breakpoint*) /home/smarchi/src/binutils-gdb/gdb/breakpoint.c:12404
+ #3 0x563f702150a7 in check_longjmp_breakpoint_for_call_dummy(thread_info*) /home/smarchi/src/binutils-gdb/gdb/breakpoint.c:7673
+ #4 0x563f714567b1 in process_event_stop_test /home/smarchi/src/binutils-gdb/gdb/infrun.c:6881
+ #5 0x563f71454e07 in handle_signal_stop /home/smarchi/src/binutils-gdb/gdb/infrun.c:6769
+ #6 0x563f7144b680 in handle_inferior_event /home/smarchi/src/binutils-gdb/gdb/infrun.c:6023
+ #7 0x563f71436165 in fetch_inferior_event() /home/smarchi/src/binutils-gdb/gdb/infrun.c:4387
+ #8 0x563f7136ff51 in inferior_event_handler(inferior_event_type) /home/smarchi/src/binutils-gdb/gdb/inf-loop.c:42
+ #9 0x563f7168038d in handle_target_event /home/smarchi/src/binutils-gdb/gdb/linux-nat.c:4219
+ #10 0x563f72fccb6d in handle_file_event /home/smarchi/src/binutils-gdb/gdbsupport/event-loop.cc:573
+ #11 0x563f72fcd503 in gdb_wait_for_event /home/smarchi/src/binutils-gdb/gdbsupport/event-loop.cc:694
+ #12 0x563f72fcaf2b in gdb_do_one_event(int) /home/smarchi/src/binutils-gdb/gdbsupport/event-loop.cc:217
+ #13 0x563f7262b9bb in wait_sync_command_done() /home/smarchi/src/binutils-gdb/gdb/top.c:426
+ #14 0x563f7137a7c3 in run_inferior_call /home/smarchi/src/binutils-gdb/gdb/infcall.c:650
+ #15 0x563f71381295 in call_function_by_hand_dummy(value*, type*, gdb::array_view<value*>, void (*)(void*, int), void*) /home/smarchi/src/binutils-gdb/gdb/infcall.c:1332
+ #16 0x563f7137c0e2 in call_function_by_hand(value*, type*, gdb::array_view<value*>) /home/smarchi/src/binutils-gdb/gdb/infcall.c:780
+ #17 0x563f70fe5960 in evaluate_subexp_do_call(expression*, noside, value*, gdb::array_view<value*>, char const*, type*) /home/smarchi/src/binutils-gdb/gdb/eval.c:649
+ #18 0x563f70fe6617 in expr::operation::evaluate_funcall(type*, expression*, noside, char const*, std::__debug::vector<std::unique_ptr<expr::operation, std::default_delete<expr::operation> >, std::allocator<std::unique_ptr<expr::operation, std::default_delete<expr::operation> > > > const&) /home/smarchi/src/binutils-gdb/gdb/eval.c:677
+ #19 0x563f6fd19668 in expr::operation::evaluate_funcall(type*, expression*, noside, std::__debug::vector<std::unique_ptr<expr::operation, std::default_delete<expr::operation> >, std::allocator<std::unique_ptr<expr::operation, std::default_delete<expr::operation> > > > const&) /home/smarchi/src/binutils-gdb/gdb/expression.h:136
+ #20 0x563f70fe6bba in expr::var_value_operation::evaluate_funcall(type*, expression*, noside, std::__debug::vector<std::unique_ptr<expr::operation, std::default_delete<expr::operation> >, std::allocator<std::unique_ptr<expr::operation, std::default_delete<expr::operation> > > > const&) /home/smarchi/src/binutils-gdb/gdb/eval.c:689
+ #21 0x563f704b71dc in expr::funcall_operation::evaluate(type*, expression*, noside) /home/smarchi/src/binutils-gdb/gdb/expop.h:2219
+ #22 0x563f70fe0f02 in expression::evaluate(type*, noside) /home/smarchi/src/binutils-gdb/gdb/eval.c:110
+ #23 0x563f71b1373e in process_print_command_args /home/smarchi/src/binutils-gdb/gdb/printcmd.c:1319
+ #24 0x563f71b1391b in print_command_1 /home/smarchi/src/binutils-gdb/gdb/printcmd.c:1332
+ #25 0x563f71b147ec in print_command /home/smarchi/src/binutils-gdb/gdb/printcmd.c:1465
+ #26 0x563f706029b8 in do_simple_func /home/smarchi/src/binutils-gdb/gdb/cli/cli-decode.c:95
+ #27 0x563f7061972a in cmd_func(cmd_list_element*, char const*, int) /home/smarchi/src/binutils-gdb/gdb/cli/cli-decode.c:2735
+ #28 0x563f7262d0ef in execute_command(char const*, int) /home/smarchi/src/binutils-gdb/gdb/top.c:572
+ #29 0x563f7100ed9c in command_handler(char const*) /home/smarchi/src/binutils-gdb/gdb/event-top.c:543
+
+ previously allocated by thread T0 here:
+ #0 0x7f5a7fce2012 in operator new(unsigned long) /usr/src/debug/gcc/gcc/libsanitizer/asan/asan_new_delete.cpp:95
+ #1 0x563f7029a9a3 in new_momentary_breakpoint<program_space*&, frame_id&, int&> /home/smarchi/src/binutils-gdb/gdb/breakpoint.c:8129
+ #2 0x563f702212f6 in momentary_breakpoint_from_master /home/smarchi/src/binutils-gdb/gdb/breakpoint.c:8169
+ #3 0x563f70212db1 in set_longjmp_breakpoint_for_call_dummy() /home/smarchi/src/binutils-gdb/gdb/breakpoint.c:7582
+ #4 0x563f713804db in call_function_by_hand_dummy(value*, type*, gdb::array_view<value*>, void (*)(void*, int), void*) /home/smarchi/src/binutils-gdb/gdb/infcall.c:1260
+ #5 0x563f7137c0e2 in call_function_by_hand(value*, type*, gdb::array_view<value*>) /home/smarchi/src/binutils-gdb/gdb/infcall.c:780
+ #6 0x563f70fe5960 in evaluate_subexp_do_call(expression*, noside, value*, gdb::array_view<value*>, char const*, type*) /home/smarchi/src/binutils-gdb/gdb/eval.c:649
+ #7 0x563f70fe6617 in expr::operation::evaluate_funcall(type*, expression*, noside, char const*, std::__debug::vector<std::unique_ptr<expr::operation, std::default_delete<expr::operation> >, std::allocator<std::unique_ptr<expr::operation, std::default_delete<expr::operation> > > > const&) /home/smarchi/src/binutils-gdb/gdb/eval.c:677
+ #8 0x563f6fd19668 in expr::operation::evaluate_funcall(type*, expression*, noside, std::__debug::vector<std::unique_ptr<expr::operation, std::default_delete<expr::operation> >, std::allocator<std::unique_ptr<expr::operation, std::default_delete<expr::operation> > > > const&) /home/smarchi/src/binutils-gdb/gdb/expression.h:136
+ #9 0x563f70fe6bba in expr::var_value_operation::evaluate_funcall(type*, expression*, noside, std::__debug::vector<std::unique_ptr<expr::operation, std::default_delete<expr::operation> >, std::allocator<std::unique_ptr<expr::operation, std::default_delete<expr::operation> > > > const&) /home/smarchi/src/binutils-gdb/gdb/eval.c:689
+ #10 0x563f704b71dc in expr::funcall_operation::evaluate(type*, expression*, noside) /home/smarchi/src/binutils-gdb/gdb/expop.h:2219
+ #11 0x563f70fe0f02 in expression::evaluate(type*, noside) /home/smarchi/src/binutils-gdb/gdb/eval.c:110
+ #12 0x563f71b1373e in process_print_command_args /home/smarchi/src/binutils-gdb/gdb/printcmd.c:1319
+ #13 0x563f71b1391b in print_command_1 /home/smarchi/src/binutils-gdb/gdb/printcmd.c:1332
+ #14 0x563f71b147ec in print_command /home/smarchi/src/binutils-gdb/gdb/printcmd.c:1465
+ #15 0x563f706029b8 in do_simple_func /home/smarchi/src/binutils-gdb/gdb/cli/cli-decode.c:95
+ #16 0x563f7061972a in cmd_func(cmd_list_element*, char const*, int) /home/smarchi/src/binutils-gdb/gdb/cli/cli-decode.c:2735
+ #17 0x563f7262d0ef in execute_command(char const*, int) /home/smarchi/src/binutils-gdb/gdb/top.c:572
+ #18 0x563f7100ed9c in command_handler(char const*) /home/smarchi/src/binutils-gdb/gdb/event-top.c:543
+ #19 0x563f7101014b in command_line_handler(std::unique_ptr<char, gdb::xfree_deleter<char> >&&) /home/smarchi/src/binutils-gdb/gdb/event-top.c:779
+ #20 0x563f72777942 in tui_command_line_handler /home/smarchi/src/binutils-gdb/gdb/tui/tui-interp.c:104
+ #21 0x563f7100d059 in gdb_rl_callback_handler /home/smarchi/src/binutils-gdb/gdb/event-top.c:250
+ #22 0x7f5a80418246 in rl_callback_read_char (/usr/lib/libreadline.so.8+0x3b246) (BuildId: 092e91fc4361b0ef94561e3ae03a75f69398acbb)
+
+ Change-Id: Id00c17ab677f847fbf4efdf0f4038373668d3d88
+ Approved-By: Tom Tromey <tom@tromey.com>
+
+2023-05-09 Enze Li <enze.li@gmx.com>
+
+ Correct a spelling mistake in the binutils README file.
+
+2023-05-09 Alan Modra <amodra@gmail.com>
+
+ stack overflow in debug_write_type
+ Another fuzzer attack. This one was a "set" with elements using an
+ indirect type pointing back at the set. The existing recursion check
+ only prevented simple recursion.
+
+ * debug.c (struct debug_type_s): Add mark.
+ (debug_write_type): Set mark and check before recursing into
+ indirect types.
+
+2023-05-09 Alan Modra <amodra@gmail.com>
+
+ alpha-vms reloc sanity check
+ Stops fuzzed files triggering reads past the end of the reloc buffer.
+
+ * vms-alpha.c (alpha_vms_slurp_relocs): Sanity check reloc records.
+
+2023-05-09 Alan Modra <amodra@gmail.com>
+
+ regen ld/Makefile.in
+
+2023-05-09 GDB Administrator <gdbadmin@sourceware.org>
+
+ Automatic date update in version.in
+
+2023-05-08 John Baldwin <jhb@FreeBSD.org>
+
+ gdbserver: Clear upper ZMM registers in the right location.
+ This was previously clearing the upper 32 bytes of ZMM0-15 rather than
+ ZMM16-31.
+
+ Approved-By: Simon Marchi <simon.marchi@efficios.com>
+
+2023-05-08 John Baldwin <jhb@FreeBSD.org>
+
+ x86-fbsd-nat: Add missing public label.
+ These two methods are both overrides of public methods in base
+ classes.
+
+2023-05-08 Felix Willgerodt <felix.willgerodt@intel.com>
+
+ gdb: Avoid warning for the jump command inside an inline function.
+ When stopped inside an inline function, trying to jump to a different line
+ of the same function currently results in a warning about jumping to another
+ function. Fix this by taking inline functions into account.
+
+ Before:
+ Breakpoint 1, function_inline (x=510) at jump-inline.cpp:22
+ 22 a = a + x; /* inline-funct */
+ (gdb) j 21
+ Line 21 is not in `function_inline(int)'. Jump anyway? (y or n)
+
+ After:
+ Breakpoint 2, function_inline (x=510) at jump-inline.cpp:22
+ 22 a = a + x; /* inline-funct */
+ (gdb) j 21
+ Continuing at 0x400679.
+
+ Breakpoint 1, function_inline (x=510) at jump-inline.cpp:21
+ 21 a += 1020 + a; /* increment-funct */
+
+ This was regression-tested on X86-64 Linux.
+
+ Co-Authored-by: Cristian Sandu <cristian.sandu@intel.com>
+ Approved-By: Andrew Burgess <aburgess@redhat.com>
+
+2023-05-08 Alan Modra <amodra@gmail.com>
+
+ pe.em and pep.em make_import_fixup
+ This is a little cleanup that I made when looking at pr30343 that
+ makes it more obvious that make_import_fixup in both files are
+ identical (and in fact the new pep.em read_addend could be used in
+ both files).
+
+ * emultempl/pep.em (read_addend): Extract from..
+ (make_import_fixup): ..here.
+ * emultempl/pe.em (read_addend): Similarly.
+ (make_import_fixup): Similarly. Add debug code from pep.em.
+
+2023-05-08 Alan Modra <amodra@gmail.com>
+
+ PR30343, LTO ignores linker reference to _pei386_runtime_relocator
+ Make a reference to _pei386_runtime_relocator before LTO recompilation.
+ This is done regardless of whether such a reference will be used,
+ because it can't be known whether it is needed before LTO.
+
+ I also found it necessary to enable long section names for the bfd
+ created in make_runtime_pseudo_reloc, because otherwise when writing
+ it out to the bfd-in-memory we get the section written as .rdata_r
+ which when read back in leads to a linker warning ".rdata_r: section
+ below image base" and likely runtime misbehaviour.
+
+ PR 30343
+ * emultempl/pe.em (make_runtime_ref): New function.
+ (gld${EMULATION_NAME}_before_plugin_all_symbols_read): New function.
+ (LDEMUL_BEFORE_PLUGIN_ALL_SYMBOLS_READ): Define.
+ * emultempl/pep.em: Similarly to pe.em.
+ * pe-dll.c (make_runtime_pseudo_reloc): Set long section names.
+
+2023-05-08 GDB Administrator <gdbadmin@sourceware.org>
+
+ Automatic date update in version.in
+
+2023-05-07 Tom Tromey <tom@tromey.com>
+
+ Remove parameter from select_source_symtab
+ I noticed that select_source_symtab is only ever called with nullptr
+ as an argument, so this patch removes the parameter and associated
+ logic.
+
+ Reviewed-By: Bruno Larsen <blarsen@redhat.com>
+
+2023-05-07 Tom Tromey <tom@tromey.com>
+
+ Remove ALL_BREAKPOINTS_SAFE
+ There's just a single remaining use of the ALL_BREAKPOINTS_SAFE macro;
+ this patch replaces it with a for-each and an explicit temporary
+ variable.
+
+ Remove ALL_DICT_SYMBOLS
+ This replaces ALL_DICT_SYMBOLS with an iterator so that for-each can
+ be used.
+
+ Remove ALL_OBJFILE_OSECTIONS
+ This replaces ALL_OBJFILE_OSECTIONS with an iterator so that for-each
+ can be used.
+
+ Rename objfile::sections
+ I think objfile::sections makes sense as the name of the method to
+ iterate over an objfile's sections, so this patch renames the existing
+ field to objfile::sections_start in preparation for that.
+
+2023-05-07 GDB Administrator <gdbadmin@sourceware.org>
+
+ Automatic date update in version.in
+
+2023-05-06 Tom Tromey <tom@tromey.com>
+
+ Allow pretty-print of static members
+ Python pretty-printers haven't applied to static members for quite
+ some time. I tracked this down to the call to cp_print_value_fields
+ in cp_print_static_field -- it doesn't let pretty-printers have a
+ chance to print the value. This patch fixes the problem.
+
+ The way that static members are handled is very weird to me. I tend
+ to think this should be done more globally, like in value_print.
+ However, I haven't made any big change.
+
+ Reviewed-by: Keith Seitz <keiths@redhat.com>
+ Tested-by: Keith Seitz <keiths@redhat.com>
+ Bug: https://sourceware.org/bugzilla/show_bug.cgi?id=30057
+
+2023-05-06 YunQiang Su <yunqiang.su@cipunited.com>
+
+ gas: documents .gnu_attribute Tag_GNU_MIPS_ABI_MSA
+ It is added since 2016 by
+ Add support for .MIPS.abiflags and .gnu.attributes sections
+ b52717c0e104eb603e8189c3c0d3658ef5d903f5
+ But never documented.
+
+2023-05-06 GDB Administrator <gdbadmin@sourceware.org>
+
+ Automatic date update in version.in
+
+2023-05-05 Tom Tromey <tromey@adacore.com>
+
+ Filter out types from DAP scopes request
+ The DAP scopes request examines the symbols in a block tree, but
+ neglects to omit types. This patch fixes the problem.
+
+2023-05-05 Tom Tromey <tromey@adacore.com>
+
+ Use discrete_position in ada-valprint.c
+ I found a couple of spots in ada-valprint.c that use an explicit loop,
+ but where discrete_position could be used instead.
+
+ Reviewed-by: Keith Seitz <keiths@redhat.com>
+
+2023-05-05 Andrew Burgess <aburgess@redhat.com>
+
+ gdb/python: add mechanism to manage Python initialization functions
+ Currently, when we add a new python sub-system to GDB,
+ e.g. py-inferior.c, we end up having to create a new function like
+ gdbpy_initialize_inferior, which then has to be called from the
+ function do_start_initialization in python.c.
+
+ In some cases (py-micmd.c and py-tui.c), we have two functions
+ gdbpy_initialize_*, and gdbpy_finalize_*, with the second being called
+ from finalize_python which is also in python.c.
+
+ This commit proposes a mechanism to manage these initialization and
+ finalization calls, this means that adding a new Python subsystem will
+ no longer require changes to python.c or python-internal.h, instead,
+ the initialization and finalization functions will be registered
+ directly from the sub-system file, e.g. py-inferior.c, or py-micmd.c.
+
+ The initialization and finalization functions are managed through a
+ new class gdbpy_initialize_file in python-internal.h. This class
+ contains a single global vector of all the initialization and
+ finalization functions.
+
+ In each Python sub-system we create a new gdbpy_initialize_file
+ object, the object constructor takes care of registering the two
+ callback functions.
+
+ Now from python.c we can call static functions on the
+ gdbpy_initialize_file class which take care of walking the callback
+ list and invoking each callback in turn.
+
+ To slightly simplify the Python sub-system files I added a new macro
+ GDBPY_INITIALIZE_FILE, which hides the need to create an object. We
+ can now just do this:
+
+ GDBPY_INITIALIZE_FILE (gdbpy_initialize_registers);
+
+ One possible problem with this change is that there is now no
+ guaranteed ordering of how the various sub-systems are initialized (or
+ finalized). To try and avoid dependencies creeping in I have added a
+ use of the environment variable GDB_REVERSE_INIT_FUNCTIONS, this is
+ the same environment variable used in the generated init.c file.
+
+ Just like with init.c, when this environment variable is set we
+ reverse the list of Python initialization (and finalization)
+ functions. As there is already a test that starts GDB with the
+ environment variable set then this should offer some level of
+ protection against dependencies creeping in - though for full
+ protection I guess we'd need to run all gdb.python/*.exp tests with
+ the variable set.
+
+ I have tested this patch with the environment variable set, and saw no
+ regressions, so I think we are fine right now.
+
+ One other change of note was for gdbpy_initialize_gdb_readline, this
+ function previously returned void. In order to make this function
+ have the correct signature I've updated its return type to int, and we
+ now return 0 to indicate success.
+
+ All of the other initialize (and finalize) functions have been made
+ static within their respective sub-system files.
+
+ There should be no user visible changes after this commit.
+
+2023-05-05 Andrew Burgess <aburgess@redhat.com>
+
+ gdb/testsuite: more newline pattern cleanup
+ After this commit:
+
+ commit e2f620135d92f7cd670af4e524fffec7ac307666
+ Date: Thu Mar 30 13:26:25 2023 +0100
+
+ gdb/testsuite: change newline patterns used in gdb_test
+
+ It was pointed out in PR gdb/30403 that the same patterns can be found
+ in other lib/gdb.exp procs and that it would probably be a good idea
+ if these procs remained in sync with gdb_test. Actually, the bug
+ specifically calls out gdb_test_multiple when using with '-wrap', but
+ I found a couple of other locations in gdb_continue_to_breakpoint,
+ gdb_test_multiline, get_valueof, and get_local_valueof.
+
+ In all these locations one or both of the following issues are
+ addressed:
+
+ 1. A leading pattern of '[\r\n]*' is pointless. If there is a
+ newline it will be matched, but if there is not then the testsuite
+ doesn't care. Also, as expect is happy to skip non-matched output
+ at the start of a pattern, if there is a newline expect is happy to
+ skip over it before matching the rest. As such, this leading
+ pattern is removed.
+
+ 2. Using '\[\r\n\]*$gdb_prompt' means that we will swallow
+ unexpected blank lines at the end of a command's output, but also,
+ if the pattern from the test script ends with a '\r', '\n', or '.'
+ then these will partially match the trailing newline, with the
+ remainder of the newline matched by the pattern from gdb.exp. This
+ split matching doesn't add any value, it's just something that has
+ appeared as a consequence of how gdb.exp was originally written. In
+ this case the '\[\r\n\]*' is replaced with '\r\n'.
+
+ I've rerun the testsuite and fixed the regressions that I saw, these
+ were places where GDB emits a blank line at the end of the command
+ output, which we now need to explicitly match in the test script, this
+ was for:
+
+ gdb.dwarf2/dw2-out-of-range-end-of-seq.exp
+ gdb.guile/guile.exp
+ gdb.python/python.exp
+
+ Or a location where the test script was matching part of the newline
+ sequence, while gdb.exp was previously matching the remainder of the
+ newline sequence. Now we rely on gdb.exp to match the complete
+ newline sequence, this was for:
+
+ gdb.base/commands.exp
+
+ Bug: https://sourceware.org/bugzilla/show_bug.cgi?id=30403
+
+2023-05-05 Tom de Vries <tdevries@suse.de>
+
+ [gdb/testsuite] Generate long string in gdb.base/page.exp
+ I noticed in gdb.base/page.exp:
+ ...
+ set fours [string repeat 4 40]
+ ...
+ but then shortly afterwards:
+ ...
+ [list 1\r\n 2\r\n 3\r\n 444444444444444444444444444444]
+ ...
+
+ Summarize the long string in the same way using string repeat:
+ ...
+ [list 1\r\n 2\r\n 3\r\n [string repeat 4 30]]
+ ...
+
+ Tested on x86_64-linux.
+
+2023-05-05 Andrew Burgess <aburgess@redhat.com>
+
+ gdb/testsuite: tighten patterns in build-id-no-debug-warning.exp
+ Tighten the expected output pattern in the test script:
+
+ gdb.debuginfod/build-id-no-debug-warning.exp
+
+ While working on some other patch I broke GDB such that this warning:
+
+ warning: "FILENAME": separate debug info file has no debug info
+
+ (which is generated in build-id.c) didn't actually include the
+ FILENAME any more -- yet this test script continued to pass. It turns
+ out that this script doesn't actually check for FILENAME.
+
+ This commit extends the test pattern to check for the full warning
+ string, including FILENAME, and also removes some uses of '.*' to make
+ the test stricter.
+
+2023-05-05 Tom Tromey <tom@tromey.com>
+
+ Simplify decode_locdesc
+ While looking into another bug, I noticed that the DWARF cooked
+ indexer picks up an address for this symbol:
+
+ <1><82>: Abbrev Number: 2 (DW_TAG_variable)
+ <83> DW_AT_specification: <0x9f>
+ <87> DW_AT_location : 10 byte block: e 0 0 0 0 0 0 0 0 e0 (DW_OP_const8u: 0 0; DW_OP_GNU_push_tls_address or DW_OP_HP_unknown)
+ <92> DW_AT_linkage_name: (indirect string, offset: 0x156): _ZN9container8tlsvar_0E
+
+ This happens because decode_locdesc allows the use of
+ DW_OP_GNU_push_tls_address.
+
+ This didn't make sense to me. I looked into it a bit more, and I
+ think decode_locdesc is used in three ways:
+
+ 1. Find a constant address of a symbol that happens to be encoded as a
+ location expression.
+
+ 2. Find the offset of a function in a virtual table. (This one should
+ probably be replaced by code to just evaluate the expression in
+ gnu-v3-abi.c -- but there's no point yet because no compiler
+ actually seems to emit correct DWARF here, see the bug linked in
+ the patch.)
+
+ 3. Find the offset of a field, if the offset is a constant.
+
+ None of these require TLS.
+
+ This patch simplifies decode_locdesc by removing any opcodes that
+ don't fit into the above. It also changes the API a little, to make
+ it less difficult to use.
+
+ Regression tested on x86-64 Fedora 36.
+
+2023-05-05 Tom Tromey <tom@tromey.com>
+
+ Simplify auto_load_expand_dir_vars and remove substitute_path_component
+ This simplifies auto_load_expand_dir_vars to first split the string,
+ then do any needed substitutions. This was suggested by Simon, and is
+ much simpler than the current approach.
+
+ Then this patch also removes substitute_path_component, as it is no
+ longer called. This is nice because it helps with the long term goal
+ of removing utils.h.
+
+ Regression tested on x86-64 Fedora 36.
+
+2023-05-05 Tom de Vries <tdevries@suse.de>
+
+ [gdb/testsuite] Add gdb.base/wrap-line.exp
+ Add a test-case that tests prompt edit wrapping in CLI, both
+ for TERM=xterm and TERM=ansi, both with auto-detected and hard-coded width.
+
+ In the TERM=ansi case with auto-detected width we run into PR cli/30346, so
+ add a KFAIL for that failure mode.
+
+ Tested on x86_64-linux.
+
+2023-05-05 Tom de Vries <tdevries@suse.de>
+
+ [gdb/testsuite] Add gdb.tui/wrap-line.exp
+ Add a test-case that tests prompt edit wrapping behaviour in the tuiterm, both
+ for CLI and TUI, both with auto-detected and hard-coded width.
+
+ In the CLI case with auto-detected width we run into PR cli/30411, so add a
+ KFAIL for that failure mode.
+
+ Tested on x86_64-linux.
+
+2023-05-05 Nick Clifton <nickc@redhat.com>
+
+ Debug info is lost for functions only called from functions marked with cmse_nonsecure_entr
+ PR 30354
+ * elf32-arm.c (elf32_arm_gc_mark_extra_sections): If any debug sections are marked then rerun the extra marking in order to pick up any dependencies.
+
+2023-05-05 GDB Administrator <gdbadmin@sourceware.org>
+
+ Automatic date update in version.in
+
+2023-05-04 Bruno Larsen <blarsen@redhat.com>
+
+ Revert "gdb/testsuite: add KFAILs to gdb.reverse/step-reverse.exp"
+ This reverts commit 476410b3bca1389ee69e9c8fa18aaee16793a56d.
+
+ One of Simon's recent commits (2a740b3ba4c9f39c86dd75e0914ee00942cab471)
+ changed the way recording a remote target works and fixed the underlying
+ issue of the bug, so the KFails can be removed from the test.
+
+ Approved-By: Tom Tromey <tom@tromey.com>
+
+2023-05-04 Gareth Rees <grees@undo.io>
+
+ Don't treat references to compound values as "simple".
+ SUMMARY
+
+ The '--simple-values' argument to '-stack-list-arguments' and similar
+ GDB/MI commands does not take reference types into account, so that
+ references to arbitrarily large structures are considered "simple" and
+ printed. This means that the '--simple-values' argument cannot be used
+ by IDEs when tracing the stack due to the time taken to print large
+ structures passed by reference.
+
+ DETAILS
+
+ Various GDB/MI commands ('-stack-list-arguments', '-stack-list-locals',
+ '-stack-list-variables' and so on) take a PRINT-VALUES argument which
+ may be '--no-values' (0), '--all-values' (1) or '--simple-values' (2).
+ In the '--simple-values' case, the command is supposed to print the
+ name, type, and value of variables with simple types, and print only the
+ name and type of variables with compound types.
+
+ The '--simple-values' argument ought to be suitable for IDEs that need
+ to update their user interface with the program's call stack every time
+ the program stops. However, it does not take C++ reference types into
+ account, and this makes the argument unsuitable for this purpose.
+
+ For example, consider the following C++ program:
+
+ struct s {
+ int v[10];
+ };
+
+ int
+ sum(const struct s &s)
+ {
+ int total = 0;
+ for (int i = 0; i < 10; ++i) total += s.v[i];
+ return total;
+ }
+
+ int
+ main(void)
+ {
+ struct s s = { { 1, 2, 3, 4, 5, 6, 7, 8, 9, 10 } };
+ return sum(s);
+ }
+
+ If we start GDB in MI mode and continue to 'sum', the behaviour of
+ '-stack-list-arguments' is as follows:
+
+ (gdb)
+ -stack-list-arguments --simple-values
+ ^done,stack-args=[frame={level="0",args=[{name="s",type="const s &",value="@0x7fffffffe310: {v = {1, 2, 3, 4, 5, 6, 7, 8, 9, 10}}"}]},frame={level="1",args=[]}]
+
+ Note that the value of the argument 's' was printed, even though 's' is
+ a reference to a structure, which is not a simple value.
+
+ See https://github.com/microsoft/MIEngine/pull/673 for a case where this
+ behaviour caused Microsoft to avoid the use of '--simple-values' in
+ their MIEngine debug adapter, because it caused Visual Studio Code to
+ take too long to refresh the call stack in the user interface.
+
+ SOLUTIONS
+
+ There are two ways we could fix this problem, depending on whether we
+ consider the current behaviour to be a bug.
+
+ 1. If the current behaviour is a bug, then we can update the behaviour
+ of '--simple-values' so that it takes reference types into account:
+ that is, a value is simple if it is neither an array, struct, or
+ union, nor a reference to an array, struct or union.
+
+ In this case we must add a feature to the '-list-features' command so
+ that IDEs can detect that it is safe to use the '--simple-values'
+ argument when refreshing the call stack.
+
+ 2. If the current behaviour is not a bug, then we can add a new option
+ for the PRINT-VALUES argument, for example, '--scalar-values' (3),
+ that would be suitable for use by IDEs.
+
+ In this case we must add a feature to the '-list-features' command
+ so that IDEs can detect that the '--scalar-values' argument is
+ available for use when refreshing the call stack.
+
+ PATCH
+
+ This patch implements solution (1) as I think the current behaviour of
+ not printing structures, but printing references to structures, is
+ contrary to reasonable expectation.
+
+ Bug: https://sourceware.org/bugzilla/show_bug.cgi?id=29554
+
+2023-05-04 Nick Clifton <nickc@redhat.com>
+
+ Stop the linker from loosing the entry point for COFF/PE code when compiling with LTO enabled.
+ PR 30300
+ * emultempl/pep.em (set_entry_point): Add an undefined reference to the entry point if it has been constructed heuristically.
+ * emultempl/pe.em (set_entry_point): Likewise.
+
+2023-05-04 Dimitar Dimitrov <dimitar@dinux.eu>
+
+ ld: pru: Place exception-handling sections correctly
+ * scripttempl/pru.sc (OUTPUT_SECTION_ALIGN): New helper variable to place at end of DMEM output sections.
+ (.data): Use the helper variable.
+ (.eh_frame): New output section.
+ (.gnu_extab): Ditto.
+ (.gcc_except_table): Ditto.
+ (.resource_table): Use the helper variable.
+
+2023-05-04 Jan Beulich <jbeulich@suse.com>
+
+ RISC-V: tighten post-relocation-operator separator expectation
+ As per the spec merely a blank isn't okay as a separator, the operand
+ to the relocation function ought to be parenthesized. Enforcing this
+ then also eliminates an inconsistency in that
+
+ lui t0, %hi sym
+ lui t0, %hi 0x1000
+
+ were accepted, but
+
+ lui t0, %hi +sym
+ lui t0, %hi -0x1000
+
+ were not.
+
+2023-05-04 Ilya Leoshkevich <iii@linux.ibm.com>
+
+ gas: fix building tc-bpf.c on s390x
+ char is unsigned on s390x, so there are a lot of warnings like:
+
+ gas/config/tc-bpf.c: In function 'get_token':
+ gas/config/tc-bpf.c:900:14: error: comparison is always false due to limited range of data type [-Werror=type-limits]
+ 900 | if (ch == EOF || len > MAX_TOKEN_SZ)
+ | ^~
+
+ Change its type to int, like in the other similar code.
+
+ There is also:
+
+ gas/config/tc-bpf.c:735:30: error: 'bpf_endianness' may be used uninitialized in this function [-Werror=maybe-uninitialized]
+ 735 | dst, be ? size[endianness - BPF_BE16] : size[endianness - BPF_LE16]);
+ | ~~~~~~~~~~~^~~~~~~~~~
+
+ -Wmaybe-uninitialized doesn't seem to understand the FSM; just
+ initialize bpf_endianness to silence it. Add an assertion to
+ build_bpf_endianness() in order to catch potential bugs.
+
+2023-05-04 YunQiang Su <yunqiang.su@cipunited.com>
+
+ MIPS: revert "default r6 if vendor is img"
+ In commit: 9171de358f230b64646bbb525a74e5f8e3dbe0dc,
+ The default output is set to r6 if the vendor is img,
+ It is ugly and should not be in upstream.
+
+ Let's revert it.
+
+2023-05-04 GDB Administrator <gdbadmin@sourceware.org>
+
+ Automatic date update in version.in
+
+2023-05-03 Tom de Vries <tdevries@suse.de>
+
+ [gdb/build] Fix frame_list position in frame.c
+ In commit 995a34b1772 ("Guard against frame.c destructors running before
+ frame-info.c's") the following problem was addressed.
+
+ The frame_info_ptr destructor:
+ ...
+ ~frame_info_ptr ()
+ {
+ frame_list.erase (frame_list.iterator_to (*this));
+ }
+ ...
+ uses frame_list, which is a static member of class frame_info_ptr,
+ instantiated in frame-info.c:
+ ...
+ intrusive_list<frame_info_ptr> frame_info_ptr::frame_list;
+ ...
+
+ Then there's a static frame_info_pointer variable named selected_frame in
+ frame.c:
+ ...
+ static frame_info_ptr selected_frame;
+ ...
+
+ Because the destructor of selected_frame uses frame_list, its destructor needs
+ to be called before the destructor of frame_list.
+
+ But because they're in different compilation units, the initialization order and
+ consequently destruction order is not guarantueed.
+
+ The commit fixed this by handling the case that the destructor of frame_list
+ is called first, adding a check on is_linked ():
+ ...
+ ~frame_info_ptr ()
+ {
+ - frame_list.erase (frame_list.iterator_to (*this));
+ + /* If this node has static storage, it may be deleted after
+ + frame_list. Attempting to erase ourselves would then trigger
+ + internal errors, so make sure we are still linked first. */
+ + if (is_linked ())
+ + frame_list.erase (frame_list.iterator_to (*this));
+ }
+ ...
+
+ However, since then frame_list has been moved into frame.c, and
+ initialization/destruction order is guarantueed inside a compilation unit.
+
+ Revert aforementioned commit, and fix the destruction order problem by moving
+ frame_list before selected_frame.
+
+ Reverting the commit is another way of fixing the already fixed
+ Wdangling-pointer warning reported in PR build/30413, in a different way than
+ commit 9b0ccb1ebae ("Pass const frame_info_ptr reference for
+ skip_[language_]trampoline").
+
+ Approved-By: Simon Marchi <simon.marchi@efficios.com>
+ Tested on x86_64-linux.
+ PR build/30413
+ Bug: https://sourceware.org/bugzilla/show_bug.cgi?id=30413
+
+2023-05-03 Lancelot SIX <lancelot.six@amd.com>
+
+ gdb/show_args_command: print to the ui_file argument
+ The show_args_command uses gdb_printf without specifying the ui_file.
+ This means that it prints to gdb_stdout instead of the stream given as
+ an argument to the function.
+
+ This commit fixes this.
+
+ Reviewed-By: Tom Tromey <tom@tromey.com>
+
+2023-05-03 Oleg Tolmatcev <oleg.tolmatcev@gmail.com>
+
+ Make ar faster
+ * archive.c (_bfd_write_archive_contents): Use a larger buffer in order to improve efficiency.
+
+2023-05-03 Mark Wielaard <mark@klomp.org>
+
+ Pass const frame_info_ptr reference for skip_[language_]trampoline
+ g++ 13.1.1 produces a -Werror=dangling-pointer=
+
+ In file included from ../../binutils-gdb/gdb/frame.h:75,
+ from ../../binutils-gdb/gdb/symtab.h:40,
+ from ../../binutils-gdb/gdb/language.c:33:
+ In member function ‘void intrusive_list<T, AsNode>::push_empty(T&) [with T = frame_info_ptr; AsNode = intrusive_base_node<frame_info_ptr>]’,
+ inlined from ‘void intrusive_list<T, AsNode>::push_back(reference) [with T = frame_info_ptr; AsNode = intrusive_base_node<frame_info_ptr>]’ at gdbsupport/intrusive_list.h:332:24,
+ inlined from ‘frame_info_ptr::frame_info_ptr(const frame_info_ptr&)’ at gdb/frame.h:241:26,
+ inlined from ‘CORE_ADDR skip_language_trampoline(frame_info_ptr, CORE_ADDR)’ at gdb/language.c:530:49:
+ gdbsupport/intrusive_list.h:415:12: error: storing the address of local variable ‘<anonymous>’ in ‘frame_info_ptr::frame_list.intrusive_list<frame_info_ptr>::m_back’ [-Werror=dangling-pointer=]
+ 415 | m_back = &elem;
+ | ~~~~~~~^~~~~~~
+ gdb/language.c: In function ‘CORE_ADDR skip_language_trampoline(frame_info_ptr, CORE_ADDR)’:
+ gdb/language.c:530:49: note: ‘<anonymous>’ declared here
+ 530 | CORE_ADDR real_pc = lang->skip_trampoline (frame, pc);
+ | ~~~~~~~~~~~~~~~~~~~~~~^~~~~~~~~~~
+ gdb/frame.h:359:41: note: ‘frame_info_ptr::frame_list’ declared here
+ 359 | static intrusive_list<frame_info_ptr> frame_list;
+ | ^~~~~~~~~~
+
+ Each new frame_info_ptr is being pushed on a static frame list and g++
+ cannot see why that is safe in case the frame_info_ptr is created and
+ destroyed immediately when passed as value.
+
+ It isn't clear why only in this one place g++ sees the issue (probably
+ because it can inline enough code in this specific case).
+
+ Since passing the frame_info_ptr as const reference is cheaper, use
+ that as workaround for this warning.
+
+ PR build/30413
+ Bug: https://sourceware.org/bugzilla/show_bug.cgi?id=30413
+
+ Tested-by: Kevin Buettner <kevinb@redhat.com>
+ Reviewed-by: Kevin Buettner <kevinb@redhat.com>
+ Reviewed-by: Tom Tromey <tom@tromey.com>
+
+2023-05-03 Oleg Tolmatcev <oleg.tolmatcev@gmail.com>
+
+ Improve the speed of computing checksums for COFF binaries.
+ * coffcode.h (coff_read_word_from_buffer): New function.
+ * coffcode.h (COFF_CHECKSUM_BUFFER_SIZE): New constant.
+ * coffcode.h (coff_compute_checksum): Improve speed by reducing the number of seeks and reads used.
+
+2023-05-03 Alan Modra <amodra@gmail.com>
+
+ Remove unused args from bfd_make_debug_symbol
+ The ptr and size args are unused. Make the function look the same as
+ bfd_make_empty_symbol.
+
+ Generated docs and include files
+ bfd/doc/chew.c extracts documentation from source code comments
+ annotated with keywords, and generates much of bfd.h and libbfd.h from
+ those same comments. The docs have suffered from people (me too)
+ adding things like CODE_FRAGMENT to the source to put code into bfd.h
+ without realising that CODE_FRAGMENT also puts @example around said
+ code into the docs. So we have random senseless things in the docs.
+ This patch fixes that problem (well, the senseless things from
+ CODE_FRAGMENT), moves most of the code out of bfd-in.h, and improves a
+ few chew.c features. libbfd.h now automatically gets ATTRIBUTE_HIDDEN
+ prototypes, and indentation in bfd.h and libbfd.h is better.
+
+2023-05-03 Alan Modra <amodra@gmail.com>
+
+ Move bfd_alloc, bfd_zalloc and bfd_release to libbfd.c
+ These functions don't belong in opncls.c.
+
+ * libbfd-in.h (bfd_release): Delete prototype.
+ * opncls.c (bfd_alloc, bfd_zalloc, bfd_release): Move to..
+ * libbfd.c: ..here. Include objalloc.c and provide bfd_release
+ with a FUNCTION comment.
+ * bfd-in2.h: Regenerate.
+ * libbfd.h: Regenerate.
+
+2023-05-03 Alan Modra <amodra@gmail.com>
+
+ Move bfd_elf_bfd_from_remote_memory to opncls.c
+ bfd_elf_bfd_from_remote_memory is just a wrapper, and the function
+ could be implemented for other formats. Move it to opncls.c because
+ it acts a little like some of the other bfd_open* routines. Also give
+ it the usual FUNCTION etc. comment so prototypes and docs are handled
+ automatically.
+
+ * elf.c (bfd_elf_bfd_from_remote_memory): Move to..
+ * opncls.c: ..here, add FUNCTION comment.
+ * bfd-in.h (bfd_elf_bfd_from_remote_memory): Delete prototype.
+ * bfd-in2.h: Regenerate.
+
+2023-05-03 Alan Modra <amodra@gmail.com>
+
+ hash.c: replace some unsigned long with unsigned int
+ * hash.c (higher_prime_number): Use uint32_t param, return value,
+ tables and variables.
+ (bfd_default_hash_table_size): Make it an unsigned int.
+ (bfd_hash_set_default_size): Use unsigned int param and return.
+ * bfd-in.h (bfd_hash_set_default_size): Update prototype.
+ * bfd-in2.h: Regenerate.
+
+ libbfc.c: Use stdint types for unsigned char and unsigned long
+ * libbfd.c (bfd_put_8): Use bfd_byte rather than unsigned char.
+ (bfd_get_8, bfd_get_signed_8): Likewise.
+ (_bfd_read_unsigned_leb128, _bfd_safe_read_leb128): Likewise.
+ (_bfd_read_signed_leb128): Likewise.
+ (bfd_getb24, bfd_getl24): Replace unsigned long with uint32_t.
+ (bfd_getb32, bfd_getl32): Likewise.
+ (bfd_getb_signed_32, bfd_getl_signed_32): Likewise.
+
+2023-05-03 Alan Modra <amodra@gmail.com>
+
+ Change signature of bfd crc functions
+ The crc calculated is 32 bits. Replace uses of unsigned long with
+ uint32_t. Also use bfd_byte* for buffers.
+
+ bfd/
+ * opncls.c (bfd_calc_gnu_debuglink_crc32): Use stdint types.
+ (bfd_get_debug_link_info_1, bfd_get_debug_link_info): Likewise.
+ (separate_debug_file_exists, bfd_follow_gnu_debuglink): Likewise.
+ (bfd_fill_in_gnu_debuglink_section): Likewise.
+ * bfd-in2.h: Regenerate.
+ gdb/
+ * auto-load.c (auto_load_objfile_script): Update type of
+ bfd_get_debug_link_info argument.
+ * symfile.c (find_separate_debug_file_by_debuglink): Likewise.
+ * gdb_bfd.c (get_file_crc): Update type of
+ bfd_calc_gnu_debuglink_crc32 argument.
+
+2023-05-03 Alan Modra <amodra@gmail.com>
+
+ _bfd_mips_elf_lo16_reloc vallo comment
+ This explains exactly why the high reloc adjustment is as it is,
+ replacing the rather nebulous existing comment. I've also changed the
+ expression from (lo+0x8000)&0xffff to (lo&0xffff)^0x8000 which better
+ matches part of the standard 16-bit sign extension (resulting in
+ exactly the same value), and hoisted the calculation out of the loop.
+
+ * elfxx-mips.c (_bfd_mips_elf_lo16_reloc): Expand vallo
+ comment. Hoist calculation out of loop.
+
+2023-05-02 Alexandra Hájková <ahajkova@redhat.com>
+
+ gdb.base/watchpoint-unaligned.exp: Always initialize wpoffset_to_wpnum
+ Initialize wpoffset_to_wpnumto avoid TCL error which happens in some aarch64 types.
+
+ ERROR: in testcase /root/build/gdb/testsuite/../../../binutils-gdb/gdb/testsuite/gdb.base/watchpoint-unaligned.exp
+ ERROR: can't read "wpoffset_to_wpnum(1)": no such element in array
+ ERROR: tcl error code TCL READ VARNAME
+ ERROR: tcl error info:
+ can't read "wpoffset_to_wpnum(1)": no such element in array
+ while executing
+
+ Bug: https://sourceware.org/bugzilla/show_bug.cgi?id=30340
+
+ Reviewed-by: Luis Machado <luis.machado@arm.com>
+ Reviewed-By: Andrew Burgess <aburgess@redhat.com>
+
+2023-05-02 Mark Wielaard <mark@klomp.org>
+
+ xcoffread.c: Fix -Werror=dangling-pointer= issue with main_subfile.
+ GCC 13 points out that main_subfile has local function scope, but a
+ pointer to it is assigned to the global inclTable array subfile
+ element field:
+
+ In function ‘void process_linenos(CORE_ADDR, CORE_ADDR)’,
+ inlined from ‘void aix_process_linenos(objfile*)’ at xcoffread.c:727:19,
+ inlined from ‘void aix_process_linenos(objfile*)’ at xcoffread.c:720:1:
+ xcoffread.c:629:37: error: storing the address of local variable ‘main_subfile’ in ‘*inclTable.19_45 + _28._inclTable::subfile’ [-Werror=dangling-pointer=]
+ 629 | inclTable[ii].subfile = &main_subfile;
+ | ~~~~~~~~~~~~~~~~~~~~~~^~~~~~~~~~~~~~~
+ xcoffread.c: In function ‘void aix_process_linenos(objfile*)’:
+ xcoffread.c:579:18: note: ‘main_subfile’ declared here
+ 579 | struct subfile main_subfile;
+ | ^~~~~~~~~~~~
+ xcoffread.c:496:19: note: ‘inclTable’ declared here
+ 496 | static InclTable *inclTable; /* global include table */
+ | ^~~~~~~~~
+
+ Fix this by making main_subfile file static. And allocate and
+ deallocated together with inclTable in allocate_include_entry and
+ xcoff_symfile_finish. Adjust the use of main_subfile in
+ process_linenos to take a pointer to the subfile.
+
+2023-05-02 Tom de Vries <tdevries@suse.de>
+
+ [gdb/testsuite] Use set in lmap in gdb.dwarf2/dw2-abs-hi-pc.exp
+ In gdb.dwarf2/dw2-abs-hi-pc.exp we do:
+ ...
+ set sources [lmap i $sources { expr { "$srcdir/$subdir/$i" } }]
+ ...
+
+ The use of expr is not idiomatic. Fix this by using set instead:
+ ...
+ set sources [lmap i $sources { set tmp $srcdir/$subdir/$i }]
+ ...
+
+ Reported-By: Tom Tromey <tom@tromey.com>
+ Reviewed-By: Andreas Schwab <schwab@suse.de>
+
+2023-05-02 Aditya Kamath <Aditya.Kamath1@ibm.com>
+
+ Fix Assertion pid != 0 failure in AIX.
+ In AIX if there is a main and a thread created from it , then once the
+ program completed execution and goes to pd_disable () inferior_ptid
+ had pid 0 leading to an assertion failure while finding the thread's data
+ in aix-thread.c file.
+
+ This patch is a fix for the same.
+
+2023-05-02 Tom Tromey <tom@tromey.com>
+
+ Remove error_stream
+ error_stream is trivial and only used in a couple of spots in
+ breakpoint.c. This patch removes it in favor of just writing it out
+ at the spots where it was used.
+
+2023-05-02 Nick Clifton <nickc@redhat.com>
+
+ Remove Dimity Diky as MSP430 maintainer.
+
+2023-05-02 Andrew Burgess <aburgess@redhat.com>
+
+ gdb/testsuite: compile gdb.linespec/cp-completion-aliases.exp as C++
+ Noticed in passing that the prepare_for_testing call in
+ gdb.linespec/cp-completion-aliases.exp does not pass the 'c++' flag,
+ despite this being a C++ test.
+
+ I guess, as the source file has the '.cc' extension, all the compilers
+ are doing the right thing anyway -- the source file uses templates, so
+ is definitely being compiled as C++.
+
+ I noticed this when I tried to set CXX_FOR_TARGET (but not
+ CC_FOR_TARGET) and spotted that this script was still using the C
+ compiler.
+
+ Fixed in this commit by adding the 'c++' flag for prepare_for_testing.
+
+2023-05-02 GDB Administrator <gdbadmin@sourceware.org>
+
+ Automatic date update in version.in
+
+2023-05-01 Tom Tromey <tromey@adacore.com>
+
+ Document DAP 'launch' parameter
+ The Debugger Adapter Protocol defines a "launch" request but leaves
+ the parameters up to the implementation:
+
+ Since launching is debugger/runtime specific, the arguments for
+ this request are not part of this specification.
+
+ This patch adds some documentation for the parameter GDB currently
+ defines. Note that I plan to add more parameters here, and perhaps
+ there will be other extensions in time as well.
+
+ Reviewed-By: Eli Zaretskii <eliz@gnu.org>
+
+2023-05-01 Simon Marchi <simon.marchi@efficios.com>
+
+ gdb: remove ui_interp_info
+ I don't think that having struct ui_interp_info separated from struct ui
+ is very useful. As of today, it looks like an unnecessary indirection
+ layer. Move the contents of ui_interp_info directly into struct ui, and
+ update all users.
+
+ Change-Id: I817ba6e047dbcc4ba15b666af184b40bfed7e521
+
+2023-05-01 Simon Marchi <simon.marchi@efficios.com>
+
+ gdb: store interps in an intrusive_list
+ Use intrusive_list, instead of hand-made linked list.
+
+ Change-Id: Idc857b40dfa3e3c35671045898331cca2c928097
+
+2023-05-01 Simon Marchi <simon.marchi@efficios.com>
+
+ gdb: move struct ui and related things to ui.{c,h}
+ I'd like to move some things so they become methods on struct ui. But
+ first, I think that struct ui and the related things are big enough to
+ deserve their own file, instead of being scattered through top.{c,h} and
+ event-top.c.
+
+ Change-Id: I15594269ace61fd76ef80a7b58f51ff3ab6979bc
+
+2023-05-01 Tom Tromey <tromey@adacore.com>
+
+ Turn set_inferior_args_vector into method of inferior
+ This patch turns set_inferior_args_vector into an overload of
+ inferior::set_args.
+
+ Regression tested on x86-64 Fedora 36.
+
+2023-05-01 Tom Tromey <tromey@adacore.com>
+
+ Remove evaluate_type
+ Like evaluate_expression, evaluate_type is also just a simple wrapper.
+ Removing it makes the code a little nicer.
+
+ Remove evaluate_expression
+ evaluate_expression is just a little wrapper for a method on
+ expression. Removing it also removes a lot of ugly (IMO) calls to
+ get().
+
+ Remove op_name
+ op_name is only needed in a single place, so remove it and inline it
+ there.
+
+2023-05-01 Tom Tromey <tromey@adacore.com>
+
+ Fix crash in Rust expression parser
+ A user found that an array expression with just a single value (like
+ "[23]") caused the Rust expression parser to crash.
+
+ Bug: https://sourceware.org/bugzilla/show_bug.cgi?id=30410
+
+2023-05-01 Tom Tromey <tom@tromey.com>
+
+ Replace field_is_static with a method
+ This changes field_is_static to be a method on struct field, and
+ updates all the callers. Most of this patch was written by script.
+
+ Regression tested on x86-64 Fedora 36.
+
+2023-05-01 GDB Administrator <gdbadmin@sourceware.org>
+
+ Automatic date update in version.in
+
+2023-04-30 Tom de Vries <tdevries@suse.de>
+
+ [gdb/tui] Fix TUI resizing for TERM=ansi
+ With TERM=ansi, when resizing a TUI window from LINES/COLUMNS 31/118
+ (maximized) to 20/78 (de-maximized), I get a garbled screen (that ^L doesn't
+ fix) and a message:
+ ...
+ @@ resize done 0, size = 77x20
+ ...
+ with the resulting width being 77 instead of the expected 78.
+
+ [ The discrepancy also manifests in CLI, filed as PR30346. ]
+
+ The discrepancy comes from tui_resize_all, where we ask readline for the
+ screen size:
+ ...
+ rl_get_screen_size (&screenheight, &screenwidth);
+ ...
+
+ As it happens, when TERM is set to ansi, readline decides that the terminal
+ cannot auto-wrap lines, and reserves one column to deal with that, and as a
+ result reports back one less than the actual screen width:
+ ...
+ $ echo $COLUMNS
+ 78
+ $ TERM=xterm gdb -ex "show width" -ex q
+ Number of characters gdb thinks are in a line is 78.
+ $ TERM=ansi gdb -ex "show width" -ex q
+ Number of characters gdb thinks are in a line is 77.
+ ...
+
+ In tui_resize_all, we need the actual screen width, and using a screenwidth of
+ one less than the actual value garbles the screen.
+
+ This is currently not causing trouble in testing because we have a workaround
+ in place in proc Term::resize. If we disable the workaround:
+ ...
+ - stty columns [expr {$_cols + 1}] < $::gdb_tty_name
+ + stty columns $_cols < $::gdb_tty_name
+ ...
+ and dump the screen we get the same type of screen garbling:
+ ...
+ 0 +---------------------------------------+|
+ 1 ||
+ 2 ||
+ 3 ||
+ ...
+
+ Another way to reproduce the problem is using command "maint info screen".
+ After starting gdb with TERM=ansi, entering TUI, and issuing the command, we
+ get:
+ ...
+ Number of characters curses thinks are in a line is 78.
+ ...
+ and after maximizing and demaximizing the window we get:
+ ...
+ Number of characters curses thinks are in a line is 77.
+ ...
+ If we use TERM=xterm, we do get the expected 78.
+
+ Fix this by:
+ - detecting when readline will report back less than the actual screen width,
+ - accordingly setting a new variable readline_hidden_cols,
+ - using readline_hidden_cols in tui_resize_all to fix the resize problem, and
+ - removing the workaround in Term::resize.
+
+ The test-case gdb.tui/empty.exp serves as regression test.
+
+ I've applied the same fix in tui_async_resize_screen, the new test-case
+ gdb.tui/resize-2.exp serves as a regression test for that change. Without
+ that fix, we have:
+ ...
+ FAIL: gdb.tui/resize-2.exp: again: gdb width 80
+ ...
+
+ Tested on x86_64-linux.
+
+ PR tui/30337
+ Bug: https://sourceware.org/bugzilla/show_bug.cgi?id=30337
+
+2023-04-30 GDB Administrator <gdbadmin@sourceware.org>
+
+ Automatic date update in version.in
+
+2023-04-29 Tom de Vries <tdevries@suse.de>
+
+ [gdb/testsuite] Fix gdb.base/readline.exp with stub-termcap
+ When doing a build which uses stub-termcap, we run into:
+ ...
+ (gdb) set width 7
+ <b) FAIL: gdb.base/readline.exp: set width 7 (timeout)
+ ...
+
+ Since readline can't detect very basic terminal support, it falls back on
+ horizontal scrolling.
+
+ Fix this by detecting the horizontal scrolling case, and skipping the
+ subsequent test.
+
+ Tested on x86_64-linux.
+
+ PR testsuite/30400
+ Bug: https://sourceware.org/bugzilla/show_bug.cgi?id=30400
+
+2023-04-29 Manoj Gupta <manojgupta@google.com>
+
+ gdb: Fix building with latest libc++
+ Latest libc++[1] causes transitive include to <locale> when
+ <mutex> or <thread> header is included. This causes
+ gdb to not build[2] since <locale> defines isupper/islower etc.
+ functions that are explicitly macroed-out in safe-ctype.h to
+ prevent their use.
+ Use the suggestion from libc++ to include <locale> internally when
+ building in C++ mode to avoid build errors.
+ Use safe-gdb-ctype.h as the include instead of "safe-ctype.h"
+ to keep this isolated to gdb since rest of binutils
+ does not seem to use much C++.
+
+ [1]: https://reviews.llvm.org/D144331
+ [2]: https://issuetracker.google.com/issues/277967395
+
+2023-04-29 Tom de Vries <tdevries@suse.de>
+
+ [gdb/testsuite] Fix gdb.ada/excep_handle.exp for updated gdb_test
+ Test-case gdb.ada/excep_handle.exp fails since commit e2f620135d9
+ ("gdb/testsuite: change newline patterns used in gdb_test"):
+ ...
+ (gdb) continue^M
+ Continuing.^M
+ ^M
+ Catchpoint 2, exception at 0x00000000004020b6 in foo () at foo.adb:26^M
+ 26 when Constraint_Error =>^M
+ (gdb) FAIL: gdb.ada/excep_handle.exp: continuing to first Constraint_Error \
+ exception handlers
+ ...
+
+ The output is supposed to be matched by:
+ ...
+ gdb_test "continue" \
+ "Continuing\.$eol$catchpoint_constraint_error_msg$eol.*" \
+ "continuing to first Constraint_Error exception handlers"
+ ...
+ but the $eol bit no longer matches due to the stricter matching introduced
+ in aforementioned commit.
+
+ Fix this by dropping the "$eol.*" bit.
+
+ Tested on x86_64-linux.
+
+ PR testsuite/30399
+ Bug: https://sourceware.org/bugzilla/show_bug.cgi?id=30399
+
+2023-04-29 Tom de Vries <tdevries@suse.de>
+
+ [gdb/build] Fix build without ncurses in maintenance_info_screen
+ With a build without ncurses we run into:
+ ...
+ src/gdb/utils.c: In function ‘void maintenance_info_screen(const char*, int)’:
+ src/gdb/utils.c:1310:7: error: ‘COLS’ was not declared in this scope
+ COLS);
+ ^~~~
+ src/gdb/utils.c:1331:8: error: ‘LINES’ was not declared in this scope
+ LINES);
+ ^~~~~
+ ...
+
+ Fix this by using HAVE_LIBCURSES.
+
+ Tested on x86_64-linux.
+
+ PR build/30391
+ Bug: https://sourceware.org/bugzilla/show_bug.cgi?id=30391
+
+2023-04-29 Tom de Vries <tdevries@suse.de>
+
+ [gdb/testsuite] Fix gdb.tui/main.exp without TUI
+ With a build with --disable-tui, we get:
+ ...
+ (gdb) PASS: gdb.tui/main.exp: set interactive-mode off
+ maint set tui-left-margin-verbose on^M
+ Undefined maintenance set command: "tui-left-margin-verbose on". \
+ Try "help maintenance set".^M
+ (gdb) FAIL: gdb.tui/main.exp: maint set tui-left-margin-verbose on
+ ...
+
+ Fix this by adding the missing "require allow_tui_tests".
+
+ Tested on x86_64-linux.
+
+2023-04-29 GDB Administrator <gdbadmin@sourceware.org>
+
+ Automatic date update in version.in
+
+2023-04-29 Andrew Burgess <aburgess@redhat.com>
+
+ gdb/mi: check thread exists when creating thread-specific b/p
+ I noticed the following behaviour:
+
+ $ gdb -q -i=mi /tmp/hello.x
+ =thread-group-added,id="i1"
+ =cmd-param-changed,param="print pretty",value="on"
+ ~"Reading symbols from /tmp/hello.x...\n"
+ (gdb)
+ -break-insert -p 99 main
+ ^done,bkpt={number="1",type="breakpoint",disp="keep",enabled="y",addr="0x0000000000401198",func="main",file="/tmp/hello.c",fullname="/tmp/hello.c",line="18",thread-groups=["i1"],thread="99",times="0",original-location="main"}
+ (gdb)
+ info breakpoints
+ &"info breakpoints\n"
+ ~"Num Type Disp Enb Address What\n"
+ ~"1 breakpoint keep y 0x0000000000401198 in main at /tmp/hello.c:18\n"
+ &"../../src/gdb/thread.c:1434: internal-error: print_thread_id: Assertion `thr != nullptr' failed.\nA problem internal to GDB has been detected,\nfurther debugging may prove unreliable."
+ &"\n"
+ &"----- Backtrace -----\n"
+ &"Backtrace unavailable\n"
+ &"---------------------\n"
+ &"\nThis is a bug, please report it."
+ &" For instructions, see:\n"
+ &"<https://www.gnu.org/software/gdb/bugs/>.\n\n"
+ Aborted (core dumped)
+
+ What we see here is that when using the MI a user can create
+ thread-specific breakpoints for non-existent threads. Then if we try
+ to use the CLI 'info breakpoints' command GDB throws an assertion.
+ The assert is a result of the print_thread_id call when trying to
+ build the 'stop only in thread xx.yy' line; print_thread_id requires a
+ valid thread_info pointer, which we can't have for a non-existent
+ thread.
+
+ In contrast, when using the CLI we see this behaviour:
+
+ $ gdb -q /tmp/hello.x
+ Reading symbols from /tmp/hello.x...
+ (gdb) break main thread 99
+ Unknown thread 99.
+ (gdb)
+
+ The CLI doesn't allow a breakpoint to be created for a non-existent
+ thread. So the 'info breakpoints' command is always fine.
+
+ Interestingly, the MI -break-info command doesn't crash, this is
+ because the MI uses global thread-ids, and so never calls
+ print_thread_id. However, GDB does support using CLI and MI in
+ parallel, so we need to solve this problem.
+
+ One option would be to change the CLI behaviour to allow printing
+ breakpoints for non-existent threads. This would preserve the current
+ MI behaviour.
+
+ The other option is to pull the MI into line with the CLI and prevent
+ breakpoints being created for non-existent threads. This is good for
+ consistency, but is a breaking change for the MI.
+
+ In the end I figured that it was probably better to retain the
+ consistent CLI behaviour, and just made the MI reject requests to
+ place a breakpoint on a non-existent thread. The only test we had
+ that depended on the old behaviour was
+ gdb.mi/mi-thread-specific-bp.exp, which was added by me in commit:
+
+ commit 2fd9a436c8d24eb0af85ccb3a2fbdf9a9c679a6c
+ Date: Fri Feb 17 10:48:06 2023 +0000
+
+ gdb: don't duplicate 'thread' field in MI breakpoint output
+
+ I certainly didn't intend for this test to rely on this feature of the
+ MI, so I propose to update this test to only create breakpoints for
+ threads that exist.
+
+ Actually, I've added a new test that checks the MI rejects creating a
+ breakpoint for a non-existent thread, and I've also extended the test
+ to run with the separate MI/CLI UIs, and then tested 'info
+ breakpoints' to ensure this command doesn't crash.
+
+ I've extended the documentation of the `-p` flag to explain the
+ constraints better.
+
+ I have also added a NEWS entry just in case someone runs into this
+ issue, at least then they'll know this change in behaviour was
+ intentional.
+
+ One thing that I did wonder about while writing this patch, is whether
+ we should treat requests like this, on both the MI and CLI, as another
+ form of pending breakpoint, something like:
+
+ (gdb) break foo thread 9
+ Thread 9 does not exist.
+ Make breakpoint pending on future thread creation? (y or [n]) y
+ Breakpoint 1 (foo thread 9) pending.
+ (gdb) info breakpoints
+ Num Type Disp Enb Address What
+ 1 breakpoint keep y <PENDING> foo thread 9
+
+ Don't know if folk think that would be a useful idea or not? Either
+ way, I think that would be a separate patch from this one.
+
+ Reviewed-By: Eli Zaretskii <eliz@gnu.org>
+
+2023-04-28 Andrew Burgess <aburgess@redhat.com>
+
+ gdb: make deprecated_show_value_hack static
+ The deprecated_show_value_hack function is now only used inside
+ cli-setshow.c, so lets make the function static to discourage its use
+ anywhere else.
+
+ There should be no user visible changes after this commit
+
+ Reviewed-By: Tom Tromey <tom@tromey.com>
+
+2023-04-28 Andrew Burgess <aburgess@redhat.com>
+
+ gdb: make set/show inferior-tty work with $_gdb_setting_str
+ Like the previous two commits, this commit fixes set/show inferior-tty
+ to work with $_gdb_setting_str.
+
+ Instead of using a scratch variable which is then pushed into the
+ current inferior from a set callback, move to the API that allows for
+ getters and setters, and store the value directly within the current
+ inferior.
+
+ Update an existing test to check the inferior-tty setting.
+
+ Reviewed-By: Tom Tromey <tom@tromey.com>
+
+2023-04-28 Andrew Burgess <aburgess@redhat.com>
+
+ gdb: make set/show cwd work with $_gdb_setting_str
+ The previous commit fixed set/show args when used with
+ $_gdb_setting_str, this commit fixes set/show cwd.
+
+ Instead of using a scratch variable which is then pushed into the
+ current inferior from a set callback, move to the API that allows for
+ getters and setters, and store the value directly within the current
+ inferior.
+
+ Update the existing test to check the cwd setting.
+
+2023-04-28 Andrew Burgess <aburgess@redhat.com>
+
+ gdb: make set/show args work with $_gdb_setting_str
+ I noticed that $_gdb_setting_str was not working with 'args', e.g.:
+
+ $ gdb -q --args /tmp/hello.x arg1 arg2 arg3
+ Reading symbols from /tmp/hello.x...
+ (gdb) show args
+ Argument list to give program being debugged when it is started is "arg1 arg2 arg3".
+ (gdb) print $_gdb_setting_str("args")
+ $1 = ""
+
+ This is because the 'args' setting is implemented using a scratch
+ variable ('inferior_args_scratch') which is updated when the user does
+ 'set args ...'. There is then a function 'set_args_command' which is
+ responsible for copying the scratch area into the current inferior.
+
+ However, when the user sets the arguments via the command line the
+ scratch variable is not updated, instead the arguments are pushed
+ straight into the current inferior.
+
+ There is a second problem, when the current inferior changes the
+ scratch area is not updated, which means that the value returned will
+ only ever reflect the last call to 'set args ...' regardless of which
+ inferior is currently selected.
+
+ Luckily, the fix is pretty easy, set/show variables have an
+ alternative API which requires we provide some getter and setter
+ functions. With this done the scratch variable can be removed and the
+ value returned will now always reflect the current inferior.
+
+ While working on set/show args I also rewrote show_args_command to
+ remove the use of deprecated_show_value_hack.
+
+ Reviewed-By: Tom Tromey <tom@tromey.com>
+
+2023-04-28 Andrew Burgess <aburgess@redhat.com>
+
+ gdb: cleanup command creation in infcmd.c
+ In infcmd.c, in order to add command completion to some of the 'set'
+ commands, we are currently creating the command, then looking up the
+ command by calling lookup_cmd.
+
+ This is no longer necessary, we already return the relevant
+ cmd_list_element object when the set/show command is created, and we
+ can use that to set the command completion callback.
+
+ I don't know if there's actually any tests for completion of these
+ commands, but I manually checked, and each command still appears to
+ offer the expected filename completion.
+
+ There should be no user visible changes after this commit.
+
+ Reviewed-By: Tom Tromey <tom@tromey.com>
+
+2023-04-28 Simon Marchi <simon.marchi@efficios.com>
+
+ gdb/record-full: disable range stepping when resuming threads
+ I see these failures, when running with the native-gdbserver of
+ native-extended-gdbserver boards:
+
+ Running /home/smarchi/src/binutils-gdb/gdb/testsuite/gdb.reverse/finish-reverse-next.exp ...
+ FAIL: gdb.reverse/finish-reverse-next.exp: reverse next 1 LEP from function body
+ FAIL: gdb.reverse/finish-reverse-next.exp: reverse next 2 at b = 5, from function body
+ FAIL: gdb.reverse/finish-reverse-next.exp: reverse next 1 GEP call from function body
+ FAIL: gdb.reverse/finish-reverse-next.exp: reverse next 2 at b = 50 from function body
+
+ Let's use this simpler program to illustrate the problem:
+
+ int main()
+ {
+ int a = 362;
+ a = a * 17;
+ return a;
+ }
+
+ It compiles down to:
+
+ int a = 362;
+ 401689: c7 45 fc 6a 01 00 00 movl $0x16a,-0x4(%rbp)
+ a = a * 17;
+ 401690: 8b 55 fc mov -0x4(%rbp),%edx
+ 401693: 89 d0 mov %edx,%eax
+ 401695: c1 e0 04 shl $0x4,%eax
+ 401698: 01 d0 add %edx,%eax
+ 40169a: 89 45 fc mov %eax,-0x4(%rbp)
+ return a;
+ 40169d: 8b 45 fc mov -0x4(%rbp),%eax
+
+ When single stepping these lines, debugging locally, while recording,
+ these are the recorded instructions (basically one for each instruction
+ shown above):
+
+ (gdb) maintenance print record-instruction 0
+ 4 bytes of memory at address 0x00007fffffffdc5c changed from: 6a 01 00 00
+ Register rip changed: (void (*)()) 0x40169a <main+21>
+ (gdb) maintenance print record-instruction -1
+ Register rax changed: 5792
+ Register eflags changed: [ PF AF IF ]
+ Register rip changed: (void (*)()) 0x401698 <main+19>
+ (gdb) maintenance print record-instruction -2
+ Register rax changed: 362
+ Register eflags changed: [ PF ZF IF ]
+ Register rip changed: (void (*)()) 0x401695 <main+16>
+ (gdb) maintenance print record-instruction -3
+ Register rax changed: 4200069
+ Register rip changed: (void (*)()) 0x401693 <main+14>
+ (gdb) maintenance print record-instruction -4
+ Register rdx changed: 140737488346696
+ Register rip changed: (void (*)()) 0x401690 <main+11>
+ (gdb) maintenance print record-instruction -5
+ 4 bytes of memory at address 0x00007fffffffdc5c changed from: 00 00 00 00
+ Register rip changed: (void (*)()) 0x401689 <main+4>
+ (gdb) maintenance print record-instruction -6
+ Not enough recorded history
+
+ But when debugging remotely:
+
+ (gdb) maintenance print record-instruction 0
+ Register rdx changed: 140737488346728
+ Register rip changed: (void (*)()) 0x401690 <main+11>
+ (gdb) maintenance print record-instruction -1
+ 4 bytes of memory at address 0x00007fffffffdc7c changed from: 00 00 00 00
+ Register rip changed: (void (*)()) 0x401689 <main+4>
+ (gdb) maintenance print record-instruction -2
+ Not enough recorded history
+
+ In this list, we only have entries for the beginning of each line. This
+ is because of the remote target's support for range stepping. The
+ record-full layer can only record instructions when the underlying
+ process target reports a stop. With range stepping, the remote target
+ single-steps multiple instructions at a time, so the record-full target
+ doesn't get to see and record them all.
+
+ Fix this by making the record-full layer disable range-stepping
+ before handing the resume request to the beneath layer, forcing the
+ remote target to report stops for each instruction.
+
+ Change-Id: Ia95ea62720bbcd0b6536a904360ffbf839eb823d
+
+2023-04-28 Keith Seitz <keiths@redhat.com>
+
+ Allow strings with printf/eval
+ PR 13098 explains that if a user attempts to use a string with either
+ `printf' (or `eval'), gdb returns an error (inferior not running):
+
+ (gdb) printf "%s\n", "hello"
+ evaluation of this expression requires the target program to be active
+
+ However, the parser can certainly handle this case:
+
+ (gdb) p "hello"
+ $1 = "hello"
+
+ This discrepancy occurs because printf_c_string does not handle
+ this specific case. The passed-in value that we are attempting to print
+ as a string is TYPE_CODE_ARRAY but it's lval type is not_lval.
+
+ printf_c_string will only attempt to print a string from the value's
+ contents when !TYPE_CODE_PTR, lval is lval_internalvar, and the value's
+ type is considered a string type:
+
+ if (value->type ()->code () != TYPE_CODE_PTR
+ && value->lval () == lval_internalvar
+ && c_is_string_type_p (value->type ()))
+ {
+ ...
+ }
+
+ Otherwise, it attempts to read the value of the string from the target's
+ memory (which is what actually generates the "evaluation of this ..."
+ error message).
+
+2023-04-28 Tom Tromey <tromey@adacore.com>
+
+ Move find_minimal_symbol_address to minsyms.c
+ I found find_minimal_symbol_address in parse.c, but it seems to me
+ that it belongs in minsyms.c.
+
+ Reviewed-By: Andrew Burgess <aburgess@redhat.com>
+
+2023-04-28 Tom Tromey <tromey@adacore.com>
+
+ Do not change type in get_discrete_low_bound
+ get_discrete_low_bound has this code:
+
+ /* Set unsigned indicator if warranted. */
+ if (low >= 0)
+ type->set_is_unsigned (true);
+
+ It's bad to modify a type in a getter like this, so this patch removes
+ this code. FWIW I looked and this code has been there since at least
+ 1999 (it was in the initial sourceware import).
+
+ Types in general would benefit from const-ification, which would
+ probably reveal more code like this, but I haven't attempted that.
+
+ Regression tested on x86-64 Fedora 36.
+
+ Reviewed-by: Kevin Buettner <kevinb@redhat.com>
+
+2023-04-28 Tom Tromey <tromey@adacore.com>
+
+ Remove @var from @defun in Python documentation
+ Eli pointed out that @var isn't needed in @defun in Texinfo. This
+ patch removes the cases I found in python.texi. I also renamed some
+ variables in one spot, because "-" isn't valid in a Python variable
+ name.
+
+2023-04-28 Andrew Burgess <aburgess@redhat.com>
+
+ gdb/testsuite: additional test fixes after gdb_test changes
+ After this commit:
+
+ commit e2f620135d92f7cd670af4e524fffec7ac307666
+ Date: Thu Mar 30 13:26:25 2023 +0100
+
+ gdb/testsuite: change newline patterns used in gdb_test
+
+ There were some regressions in gdb.trace/*.exp tests when run with the
+ native-gdbserver board. This commit fixes these regressions.
+
+ All the problems are caused by unnecessary trailing newline characters
+ included in the patterns passed to gdb_test. After the above commit
+ the testsuite is stricter when matching trailing newlines, and so the
+ additional trailing newline characters are now causing the test to
+ fail. Fix by removing all the excess trailing newline characters.
+
+ In some cases this cleanup means we should use gdb_test_no_output,
+ I've done that where appropriate. In a couple of other places I've
+ made use of multi_line to better build the expected output pattern.
+
+2023-04-28 H.J. Lu <hjl.tools@gmail.com>
+
+ ld: Use run_cc_link_tests for PR ld/26391 tests
+ Use run_cc_link_tests for PR ld/26391 tests to compile PR ld/26391 tests
+ in C.
+
+ PR ld/30002
+ * testsuite/ld-elf/elf.exp: Use run_cc_link_tests for PR ld/26391
+ tests.
+
+2023-04-28 Eli Zaretskii <eliz@gnu.org>
+
+ Fix a typo in gdb.texinfo.
+
+2023-04-28 Nelson Chu <nelson@rivosinc.com>
+
+ RISC-V: Enable x0 base relaxation for relax_pc even if --no-relax-gp.
+ Let --no-relax-gp only disable the gp relaxation for lui and pcrel
+ relaxations, since x0 base and gp relaxations are different optimizations
+ in fact, but just use the same function to handle.
+
+ bfd/
+ * elfnn-riscv.c (_bfd_riscv_relax_pc): Like _bfd_riscv_relax_lui,
+ set gp to zero when --no-relax-gp, then we should still keep the
+ x0 base relaxation.
+ (_bfd_riscv_relax_section): Enable _bfd_riscv_relax_pc when
+ --no-relax-gp, we will disable the gp relaxation in the
+ _bfd_riscv_relax_pc.
+
+2023-04-28 Nelson Chu <nelson@rivosinc.com>
+
+ RISC-V: Relax R_RISCV_[PCREL_]LO12_I/S to R_RISCV_GPREL_I/S for undefined weak.
+ bfd/
+ *elfnn-riscv.c (_bfd_riscv_relax_lui): For undefined weak symbol,
+ just relax the R_RISCV_LO12_I/S to R_RISCV_GPREL_I/S, and then don't
+ update the rs1 to zero until relocate_section.
+ (_bfd_riscv_relax_pc): Likewise, but for R_RISCV_PCREL_LO12_I/S.
+
+2023-04-28 Jan Beulich <jbeulich@suse.com>
+
+ x86: limit data passed to i386_dis_printf()
+ The function doesn't use "ins" for other than retrieving "info". Remove
+ a thus pointless level of indirection.
+
+ x86: limit data passed to prefix_name()
+ Make apparent that neither what "ins" points to nor, in particular, that
+ "ins->info->private_data" is actually used in the function.
+
+ x86/Intel: reduce ELF/PE conditional scope in x86_cons()
+ All the Intel syntax related state adjustments apply independent of
+ target or object format.
+
+ gas: move shift count check
+ ... out of mainline code, grouping together the two case labels. This
+ then also make more obvious that the comment there applies to both forms
+ of shifts.
+
+ x86: rework AMX control insn disassembly
+ Consistently do 64-bit first, VEX.L second, VEX.W third, ModR/M fourth,
+ and only then prefix, resulting in fewer table entries. Note that in the
+ course of the re-work
+ - TILEZERO has a previously missing decode step through rm_table[]
+ added,
+ - a wrong M_0 suffix for TILEZERO is also corrected to be M_1 (now an
+ infix).
+
+2023-04-28 Jan Beulich <jbeulich@suse.com>
+
+ x86: rework AMX multiplication insn disassembly
+ Consistently do 64-bit first, ModR/M second, VEX.L third, VEX.W fourth,
+ and prefix last, resulting in fewer table entries. Note that in the
+ course of the re-work wrong M_0 suffixes are also corrected to be M_1
+ (partly infixes now).
+
+ Since it ended up confusing while testing the change, also adjust the
+ test name in x86-64-amx-bad.d (to be distinct from x86-64-amx.d's).
+
+2023-04-28 Alan Modra <amodra@gmail.com>
+
+ Re: Keeping track of rs6000-coff archive element pointers
+ Commit de7b90610e9e left a hole in the element checking, explained by
+ the comment added to _bfd_xcoff_openr_next_archived_file. While
+ fixing this, tidy some types used to hold unsigned values so that
+ casts are not needed to avoid signed/unsigned comparison warnings.
+ Also tidy a few things in xcoff.h.
+
+ bfd/
+ * coff-rs6000.c (_bfd_xcoff_openr_next_archived_file): Check
+ that we aren't pointing back at the last element. Make
+ filestart a ufile_ptr. Update for xcoff_artdata change.
+ (_bfd_strntol, _bfd_strntoll): Return unsigned values.
+ (_bfd_xcoff_slurp_armap): Make off a ufile_ptr.
+ (add_ranges): Update for xcoff_artdata change.
+ * libbfd-in.h (struct artdata): Make first_file_filepos a
+ ufile_ptr.
+ * libbfd.h: Regenerate.
+ include/
+ * coff/xcoff.h (struct xcoff_artdata): Replace min_elt with
+ ar_hdr_size.
+ (xcoff_big_format_p): In the !SMALL_ARCHIVE case return true
+ for anything but a small archive.
+
+2023-04-28 Alan Modra <amodra@gmail.com>
+
+ Remove deprecated bfd_read
+ 20+ years is long enough to warn.
+
+ * bfd-in.h (bfd_read, bfd_write): Don't define
+ (_bfd_warn_deprecated): Don't declare.
+ * bfd-in2.h: Regenerate.
+ * libbfd.c (_bfd_warn_deprecated): Delete.
+
+2023-04-28 Alan Modra <amodra@gmail.com>
+
+ Make bfd_byte an int8_t, flagword a uint32_t
+ * bfd-in.h (bfd_byte): Typedef as int8_t.
+ (flagword): Typedef as uint32_t.
+ (bfd_vma, bfd_signed_vma, bfd_size_type, symvalue): Use stdint
+ types in !BFD64 case.
+ * bfd-in2.h: Regenerate.
+
+2023-04-28 GDB Administrator <gdbadmin@sourceware.org>
+
+ Automatic date update in version.in
+
+2023-04-27 Jose E. Marchesi <jose.marchesi@oracle.com>
+
+ gas: bpf: fix tests for pseudo-c syntax
+ This patch fixes the GAS BPF testsuite so the tests for pseudo-c
+ syntax are actually executed.
+
+ 2023-04-27 Jose E. Marchesi <jose.marchesi@oracle.com>
+
+ * testsuite/gas/bpf/mem.dump: New file.
+ * testsuite/gas/bpf/mem-pseudoc.d: Likewise.
+ * testsuite/gas/bpf/mem.d: #dump mem.dump.
+ * testsuite/gas/bpf/lddw.dump: New file.
+ * testsuite/gas/bpf/lddw-pseudoc.d: Likewise.
+ * testsuite/gas/bpf/lddw.d: #dump lddw.dump.
+ * testsuite/gas/bpf/jump.dump: New file.
+ * testsuite/gas/bpf/jump-pseudoc.d: Likewise
+ * testsuite/gas/bpf/jump.d: #dump jump.dump.
+ * testsuite/gas/bpf/jump32.dump: New file.
+ * testsuite/gas/bpf/jump32-pseudoc.d: Likewise.
+ * testsuite/gas/bpf/jump32.d: #dump jump32.dump.
+ * testsuite/gas/bpf/lddw-be.dump: New file.
+ * testsuite/gas/bpf/lddw-be-pseudoc.d: Likewise.
+ * testsuite/gas/bpf/lddw-be.d: #dump lddw-be.dump.
+ * testsuite/gas/bpf/indcall-1.dump: New file.
+ * testsuite/gas/bpf/indcall-1-pseudoc.d: Likewise.
+ * testsuite/gas/bpf/indcall-1.d: #dump indcall-1.dump.
+ * testsuite/gas/bpf/indcall-1-pseudoc.s (main): Fix lddw
+ instruction.
+ * testsuite/gas/bpf/atomic.dump: New file.
+ * testsuite/gas/bpf/atomic-pseudoc.d: Likewise.
+ * testsuite/gas/bpf/atomic.d: #dump atomic.dump.
+ * testsuite/gas/bpf/alu32.dump: New file.
+ * testsuite/gas/bpf/alu32-pseudoc.d: Likewise.
+ * testsuite/gas/bpf/alu32.d: #dump alu32.dump.
+ * testsuite/gas/bpf/alu.dump: New file.
+ * testsuite/gas/bpf/alu-pseudoc.d: Likewise.
+ * testsuite/gas/bpf/alu.d: #dump alu.dump.
+
+ * testsuite/gas/bpf/alu-be.dump: New file.
+ * testsuite/gas/bpf/alu-be-pseudoc.d: Likewise.
+ * testsuite/gas/bpf/alu-be.d: #dump alu-be.dump.
+ * testsuite/gas/bpf/alu32-be-pseudoc.d: New file.
+ * testsuite/gas/bpf/alu32-be-dump: Likewise.
+ * testsuite/gas/bpf/alu32-be.d: #dump alu32-be-dump.
+ * testsuite/gas/bpf/bpf.exp: Run *-pseudoc tests.
+
+2023-04-27 Tom Tromey <tromey@adacore.com>
+
+ Avoid some compiler warnings in gdb.ada
+ Running gdb.ada/verylong.exp shows a warning from the Ada compiler:
+
+ prog.adb:16:11: warning: file name does not match unit name, should be "main.adb" [enabled by default]
+
+ This patch fixes the problem, and another similar one in
+ unchecked_union.exp.
+
+2023-04-27 Michael Matz <matz@suse.de>
+
+ Fix PR30358, performance with --sort-section
+ since af31506c we only use the binary tree when section sorting is
+ required. While its unbalanced and hence can degrade to a linear list
+ it should otherwise have been equivalent to the old code relying on
+ insertion sort. Unfortunately it was not. The old code directly used
+ lang_add_section to populate the sorted list, the new code first
+ populates the tree and only then does lang_add_section on the sorted
+ result.
+
+ In the testcase we have very many linkonce section groups, and hence
+ lang_add_section won't actually insert anything for most of them. That
+ limited the to-be-sorted list length previously. The tree-sorting code
+ OTOH first created a tree of all candidates sections, including those
+ that wouldn't be inserted by lang_add_section, hence increasing the size
+ of the sorting problem. In the testcase the chain length went from
+ about 1500 to 106000, and in the degenerated case (as in the testcase)
+ that goes in quadratically.
+
+ This splits out most of the early-out code from lang_add_section to its
+ own function and uses the latter to avoid inserting into the tree. This
+ refactoring slightly changes the order of early-out tests (the ones
+ based on section flags is now done last, and only in lang_add_section).
+ The new function is not a pure predicate: it can give warnings and it
+ might change output_section, like the old early-out code did. I have
+ also added a skip-warning case in the first discard case, whose
+ non-existence seemed to have been an oversight.
+
+ PR 30358
+ * ldlang.c (wont_add_section_p): Split out from ...
+ (lang_add_section): ... here.
+ (output_section_callback_sort): Use wont_add_section_p to not
+ always add sections to the sort tree.
+
+2023-04-27 Andrew Burgess <aburgess@redhat.com>
+
+ gdb/doc: extend the documentation of the jump command
+ This commit addresses PR gdb/7946. While checking for bugs relating
+ to the jump command I noticed a long standing bug that points out a
+ deficiency with GDB's documentation of the jump command.
+
+ The bug points out that 'jump 0x...' is not always the same as 'set
+ $pc = 0x...' and then 'continue'. Writing directly to the $pc
+ register does not update any auxiliary state, e.g. $npc on SPARC,
+ while using 'jump' does.
+
+ It felt like this would be an easy issue to address by adding a
+ paragraph to the docs, so I took a stab at writing something suitable.
+
+ Bug: https://sourceware.org/bugzilla/show_bug.cgi?id=7946
+
+ Approved-By: Eli Zaretskii <eliz@gnu.org>
+
+2023-04-27 Andrew Burgess <aburgess@redhat.com>
+
+ gdb/testsuite: special case '^' in gdb_test pattern
+ In this commit I propose that we add special handling for the '^' when
+ used at the start of a gdb_test pattern. Consider this usage:
+
+ gdb_test "some_command" "^command output pattern"
+
+ I think the intention here is pretty clear - run 'some_command', and
+ the output from the command should be exactly 'command output
+ pattern'.
+
+ After the previous commit which tightened up how gdb_test matches the
+ final newline and prompt we know that the only thing after the output
+ pattern will be a single newline and prompt, and the leading '^'
+ ensures that there's no output before 'command output pattern', so
+ this will do what I want, right?
+
+ ... except it doesn't. The command itself will also needs to be
+ matched, so I should really write:
+
+ gdb_test "some_command" "^some_command\r\ncommand output pattern"
+
+ which will do what I want, right? Well, that's fine until I change
+ the command and include some regexp character, then I have to write:
+
+ gdb_test "some_command" \
+ "^[string_to_regexp some_command]\r\ncommand output pattern"
+
+ but this all gets a bit verbose, so in most cases I simply don't
+ bother anchoring the output with a '^', and a quick scan of the
+ testsuite would indicate that most other folk don't both either.
+
+ What I propose is this: the *only* thing that can appear immediately
+ after the '^' is the command converted into a regexp, so lets do that
+ automatically, moving the work into gdb_test. Thus, when I write:
+
+ gdb_test "some_command" "^command output pattern"
+
+ Inside gdb_test we will spot the leading '^' in the pattern, and
+ inject the regexp version of the command after the '^', followed by a
+ '\r\n'.
+
+ My hope is that given this new ability, folk will be more inclined to
+ anchor their output patterns when this makes sense to do so. This
+ should increase our ability to catch any unexpected output from GDB
+ that appears as a result of running a particular command.
+
+ There is one problem case we need to consider, sometime people do
+ this:
+
+ gdb_test "" "^expected output pattern"
+
+ In this case no command is sent to GDB, but we are still expecting
+ some output from GDB. This might be a result of some asynchronous
+ event for example. As there is no command sent to GDB (from the
+ gdb_test) there will be no command text to parse.
+
+ In this case my proposed new feature injects the command regexp, which
+ is the empty string (as the command itself is empty), but still
+ injects the '\r\n' after the command regexp, thus we end up with this
+ pattern:
+
+ ^\r\nexpected output pattern
+
+ This extra '\r\n' is not what we should expected here, and so there is
+ a special case inside gdb_test -- if the command is empty then don't
+ add anything after the '^' character.
+
+ There are a bunch of tests that do already use '^' followed by the
+ command, and these can all be simplified in this commit.
+
+ I've tried to run all the tests that I can to check this commit, but I
+ am certain that there will be some tests that I manage to miss.
+ Apologies for any regressions this commit causes, hopefully fixing the
+ regressions will not be too hard.
+
+ Reviewed-By: Tom Tromey <tom@tromey.com>
+
+2023-04-27 Andrew Burgess <aburgess@redhat.com>
+
+ gdb/testsuite: change newline patterns used in gdb_test
+ This commit makes two changes to how we match newline characters in
+ the gdb_test proc.
+
+ First, for the newline pattern between the command output and the
+ prompt, I propose changing from '[\r\n]+' to an explicit '\r\n'.
+
+ The old pattern would spot multiple newlines, and so there are a few
+ places where, as part of this commit, I've needed to add an extra
+ trailing '\r\n' to the pattern in the main test file, where GDB's
+ output actually includes a blank line.
+
+ But I think this is a good thing. If a command produces a blank line
+ then we should be checking for it, the current gdb_test doesn't do
+ that. But also, with the current gdb_test, if a blank line suddenly
+ appears in the output, this is going to be silently ignored, and I
+ think this is wrong, the test should fail in that case.
+
+ Additionally, the existing pattern will happily match a partial
+ newline. There are a strangely large number of tests that end with a
+ random '.' character. Not matching a literal period, but matching any
+ single character, this is then matching half of the trailing newline
+ sequence, while the \[\r\n\]+ in gdb_test is matching the other half
+ of the sequence. I can think of no reason why this would be
+ intentional, I suspect that the expected output at one time included a
+ period, which has since been remove, but I haven't bothered to check
+ on this. In this commit I've removed all these unneeded trailing '.'
+ characters.
+
+ The basic rule of gdb_test after this is that the expected pattern
+ needs to match everything up to, but not including the newline
+ sequence immediately before the GDB prompt. This is generally how the
+ proc is used anyway, so in almost all cases, this commit represents no
+ significant change.
+
+ Second, while I was cleaning up newline matching in gdb_test, I've
+ also removed the '[\r\n]*' that was added to the start of the pattern
+ passed to gdb_test_multiple.
+
+ The addition of this pattern adds no value. If the user pattern
+ matches at the start of a line then this would match against the
+ newline sequence. But, due to the '*', if the user pattern doesn't
+ match at the start of a line then this group doesn't care, it'll
+ happily match nothing.
+
+ As such, there's no value to it, it just adds more complexity for no
+ gain, so I'm removing it. No tests will need updating as a
+ consequence of this part of the patch.
+
+ Reviewed-By: Tom Tromey <tom@tromey.com>
+
+2023-04-27 Andrew Burgess <aburgess@redhat.com>
+
+ gdb/testsuite: use 'return' in gdb_test_no_output
+ A TCL proc will return the return value of the last command executed
+ within the proc's body if there is no explicit return call, so
+ gdb_test_no_output is already returning the return value of
+ gdb_test_multiple.
+
+ However, I'm not a fan of (relying on) this implicit return value
+ behaviour -- I prefer to be explicit about what we are doing. So in
+ this commit I have extended the comment on gdb_test_no_output to
+ document the possible return values (just as gdb_test does), and
+ explicitly call return.
+
+ This should make no different to our testing, but I think it's clearer
+ now what the gdb_test_no_output proc is expected to do.
+
+ The two tests gdb.base/auxv.exp and gdb.base/list.exp both rely on the
+ return value of gdb_test_no_output, and continue to pass after this
+ change.
+
+ I also spotted that gdb.base/watchpoint.exp could be updated to make
+ use of gdb_test_no_output, so I did that.
+
+ Reviewed-By: Tom Tromey <tom@tromey.com>
+
+2023-04-27 Andrew Burgess <aburgess@redhat.com>
+
+ gdb: remove some trailing newlines from warning messages
+ While working on a later patch in this series, which tightens up some
+ of our pattern matching when using gdb_test, I ran into some failures
+ caused by some warnings having a trailing newline character.
+
+ The warning function already adds a trailing newline, and it is my
+ understanding that we should not be adding a second by including a
+ newline at the end of any warning message.
+
+ The problem cases I found were in language.c and remote.c, in this
+ patch I fix the cases I hit, but I also checked all the other warning
+ calls in these two files and removed any additional trailing newlines
+ I found.
+
+ In remote.c the warning actually had a newline character in the middle
+ of the warning message (in addition to the trailing newline), which
+ I've removed. I don't think it's helpful to forcibly split a warning
+ as was done here -- in the middle of a sentence. Additionally, the
+ message isn't even that long (71 characters), so I think removing this
+ newline is an improvement.
+
+ None of the expected test result need updating with this commit,
+ currently the patterns in gdb_test will match one or more newline
+ sequences, so the tests are as happy with one newline (after this
+ commit) as they are with two newlines (before this commit). A later
+ commit will change gdb_test so that it is not so forgiving, and these
+ warnings would have caused some failures.
+
+ Reviewed-By: Tom Tromey <tom@tromey.com>
+
+2023-04-27 Andrew Burgess <aburgess@redhat.com>
+
+ gdb/testsuite: fix occasional failure in gdb.base/clear_non_user_bp.exp
+ I noticed that the gdb.base/clear_non_user_bp.exp test would sometimes
+ fail when run from a particular directory.
+
+ The test tries to find the number of the first internal breakpoint
+ using this proc:
+
+ proc get_first_maint_bp_num { } {
+ gdb_test_multiple "maint info break" "find first internal bp num" {
+ -re -wrap "(-\[0-9\]).*" {
+ return $expect_out(1,string)
+ }
+ }
+ return ""
+ }
+
+ The problem is, at the time we issue 'maint info break' there are both
+ internal breakpoint and non-internal (user created) breakpoints in
+ place. The user created breakpoints include the path to the source
+ file.
+
+ Sometimes, I'll be working from a directory that includes a number,
+ like '/tmp/blah-1/gdb/etc', in which case the pattern above actually
+ matches the '-1' from 'blah-1'. In this case there's no significant
+ problem as it turns out that -1 is the number of the first internal
+ breakpoint.
+
+ Sometimes my directory name might be '/tmp/blah-4/gdb/etc', in which
+ case the above pattern patches '-4' from 'blah-4'. It turns out this
+ is also not a problem -- the test doesn't actually need the first
+ internal breakpoint number, it just needs the number of any internal
+ breakpoint.
+
+ But sometimes my directory name might be '/tmp/blah-0/gdb/etc', in
+ which case the pattern above matches '-0' from 'blah-0', and in this
+ case the test fails - there is no internal breakpoint '-0'.
+
+ Fix this by spotting that the internal breakpoint numbers always
+ occurs after a '\r\n', and that they never start with a 0. Our
+ pattern becomes:
+
+ -re -wrap "\r\n(-\[1-9\]\[0-9\]*).*" {
+ return $expect_out(1,string)
+ }
+
+ After this I'm no longer seeing any failures.
+
+ Reviewed-By: Tom Tromey <tom@tromey.com>
+
+2023-04-27 Tankut Baris Aktemur <tankut.baris.aktemur@intel.com>
+
+ gdb, doc: add index entry for the $_inferior_thread_count convenience var
+ Add a marker in the documentation for indexing the $_inferior_thread_count
+ variable.
+
+ Approved-By: Eli Zaretskii <eliz@gnu.org>
+
+2023-04-27 Nick Clifton <nickc@redhat.com>
+
+ Add support for %x and %lx formats to the linker's vinfo() function.
+
+2023-04-27 GDB Administrator <gdbadmin@sourceware.org>
+
+ Automatic date update in version.in
+
+2023-04-26 Philipp Tomsich <philipp.tomsich@vrull.eu>
+
+ RISC-V: Support XVentanaCondOps extension
+ Ventana Micro has published the specification for their
+ XVentanaCondOps ("conditional ops") extension at
+ https://github.com/ventanamicro/ventana-custom-extensions/releases/download/v1.0.0/ventana-custom-extensions-v1.0.0.pdf
+ which contains two new instructions
+ - vt.maskc
+ - vt.maskcn
+ that can be used in constructing branchless sequences for
+ various conditional-arithmetic, conditional-logical, and
+ conditional-select operations.
+
+ To support such vendor-defined instructions in the mainline binutils,
+ this change also adds a riscv_supported_vendor_x_ext secondary
+ dispatch table (but also keeps the behaviour of allowing any unknow
+ X-extension to be specified in addition to the known ones from this
+ table).
+
+ As discussed, this change already includes the planned/agreed future
+ requirements for X-extensions (which are likely to be captured in the
+ riscv-toolchain-conventions repository):
+ - a public specification document is available (see above) and is
+ referenced from the gas-documentation
+ - the naming follows chapter 27 of the RISC-V ISA specification
+ - instructions are prefixed by a vendor-prefix (vt for Ventana)
+ to ensure that they neither conflict with future standard
+ extensions nor clash with other vendors
+
+ bfd/ChangeLog:
+
+ * elfxx-riscv.c (riscv_get_default_ext_version): Add riscv_supported_vendor_x_ext.
+ (riscv_multi_subset_supports): Recognize INSN_CLASS_XVENTANACONDOPS.
+
+ gas/ChangeLog:
+
+ * doc/c-riscv.texi: Add section to list custom extensions and
+ their documentation URLs.
+ * testsuite/gas/riscv/x-ventana-condops.d: New test.
+ * testsuite/gas/riscv/x-ventana-condops.s: New test.
+
+ include/ChangeLog:
+
+ * opcode/riscv-opc.h Add vt.maskc and vt.maskcn.
+ * opcode/riscv.h (enum riscv_insn_class): Add INSN_CLASS_XVENTANACONDOPS.
+
+ opcodes/ChangeLog:
+
+ * riscv-opc.c: Add vt.maskc and vt.maskcn.
+
+ Series-version: 1
+ Series-to: binutils@sourceware.org
+ Series-cc: Kito Cheng <kito.cheng@sifive.com>
+ Series-cc: Nelson Chu <nelson.chu@sifive.com>
+ Series-cc: Greg Favor <gfavor@ventanamicro.com>
+ Series-cc: Christoph Muellner <cmuellner@gcc.gnu.org>
+
+2023-04-26 Jose E. Marchesi <jose.marchesi@oracle.com>
+
+ gas: documentation for the BPF pseudo-c asm syntax
+ This patch expands the GAS manual in order to specify the alternate
+ pseudo-C assembly syntax used in BPF, and now supported by the
+ assembler.
+
+ gas/ChangeLog:
+
+ 2023-04-19 Jose E. Marchesi <jose.marchesi@oracle.com>
+
+ PR gas/29757
+ * doc/c-bpf.texi (BPF Pseudo-C Syntax): New section.
+
+2023-04-26 Guillermo E. Martinez <guillermo.e.martinez@oracle.com>
+
+ gas: BPF pseudo-c syntax tests
+ This patch expands the GAS BPF testsuite in order to also test the
+ alternative pseudo-C syntax used in BPF assembly.
+
+ This includes three main changes:
+
+ - Some general GAS tests involving assignment and equality operands in
+ expressions (such as = and ==) are disabled in bpf-* targets,
+ because the syntax collides with the pseudo-C BPF assembly syntax.
+
+ - New tests are added to the BPF GAS testsuite that test the pseudo-c
+ syntax. Tests for all BPF instructions are included.
+
+ - New tests are added to the BPF GAS testsuite that test the support
+ for both syntaxes in the same source.
+
+ gas/ChangeLog:
+
+ 2023-04-20 Guillermo E. Martinez <guillermo.e.martinez@oracle.com>
+
+ PR gas/29728
+ * testsuite/gas/all/assign-bad-recursive.d: Skip test in bpf-*
+ targets.
+ * testsuite/gas/all/eqv-dot.d: Likewise.
+ * testsuite/gas/all/gas.exp: Skip other assignment tests in bpf-*.
+ * testsuite/gas/bpf/alu-pseudoc.s: New file.
+ * testsuite/gas/bpf/pseudoc-normal.s: Likewise.
+ * testsuite/gas/bpf/pseudoc-normal.d: Likewise.
+ * testsuite/gas/bpf/pseudoc-normal-be.d: Likewise.
+ * testsuite/gas/bpf/mem-pseudoc.s: Likewise.
+ * testsuite/gas/bpf/lddw-pseudoc.s: Likewise.
+ * testsuite/gas/bpf/jump32-pseudoc.s: Likewise.
+ * testsuite/gas/bpf/jump-pseudoc.s: Likewise.
+ * testsuite/gas/bpf/indcall-1-pseudoc.s: Likewise.
+ * testsuite/gas/bpf/atomic-pseudoc.s: Likewise.
+ * testsuite/gas/bpf/alu32-pseudoc.s: Likewise.
+ * testsuite/gas/bpf/*.d: Add -pseudoc variants of the tests.
+
+2023-04-26 Guillermo E. Martinez <guillermo.e.martinez@oracle.com>
+
+ gas: support for the BPF pseudo-c assembly syntax
+ This patch adds support to the GNU assembler for an alternative
+ assembly syntax used in BPF. This syntax is C-like and very
+ unconventional for an assembly language, but it is generated by
+ clang/llvm and is also used in inline asm templates in kernel code, so
+ we ought to support it.
+
+ After this patch, the assembler is able to parse instructions in both
+ supported syntax: the normal assembly-like syntax and the pseudo-C
+ syntax. Instruction formats can be mixed in the source program: the
+ assembler recognizes the right syntax to use.
+
+ gas/ChangeLog:
+
+ 2023-04-20 Guillermo E. Martinez <guillermo.e.martinez@oracle.com>
+
+ PR gas/29728
+ * config/tc-bpf.h (TC_EQUAL_IN_INSN): Define.
+ * config/tc-bpf.c (LEX_IS_SYMBOL_COMPONENT): Define.
+ (LEX_IS_WHITESPACE): Likewise.
+ (LEX_IS_NEWLINE): Likewise.
+ (LEX_IS_ARITHM_OP): Likewise.
+ (LEX_IS_STAR): Likewise.
+ (LEX_IS_CLSE_BR): Likewise.
+ (LEX_IS_OPEN_BR): Likewise.
+ (LEX_IS_EQUAL): Likewise.
+ (LEX_IS_EXCLA): Likewise.
+ (ST_EOI): Likewise.
+ (MAX_TOKEN_SZ): Likewise.
+ (init_pseudoc_lex): New function.
+ (md_begin): Call init_pseudoc_lex.
+ (valid_expr): New function.
+ (build_bpf_non_generic_load): Likewise.
+ (build_bpf_atomic_insn): Likewise.
+ (build_bpf_jmp_insn): Likewise.
+ (build_bpf_arithm_insn): Likewise.
+ (build_bpf_endianness): Likewise.
+ (build_bpf_load_store_insn): Likewise.
+ (look_for_reserved_word): Likewise.
+ (is_register): Likewise.
+ (is_cast): Likewise.
+ (get_token): Likewise.
+ (bpf_pseudoc_to_normal_syntax): Likewise.
+ (md_assemble): Try pseudo-C syntax if an instruction cannot be
+ parsed.
+
+2023-04-26 Jose E. Marchesi <jose.marchesi@oracle.com>
+
+ sim: bpf: update to new BPF relocations
+ This patch updates the BPF GNU sim testsuite in order to match the new
+ BPF relocations introduced in binutils in a recent patch [1].
+
+ [1] https://sourceware.org/pipermail/binutils/2023-March/126429.html
+
+2023-04-26 Tom de Vries <tdevries@suse.de>
+
+ [gdb/tui] Fix length of status line string
+ In commit 5d10a2041eb ("gdb: add string_file::release method") this was added:
+ ...
+ + std::string string_val = string.release ();
+ ...
+ without updating subsequent uses of string.size (), which returns 0 after the
+ string.release () call.
+
+ Fix this by:
+ - using string_val.size () instead of string.size (), and
+ - adding an assert that would have caught this regression.
+
+ Tested on x86_64-linux.
+
+ Reviewed-By: Simon Marchi <simon.marchi@efficios.com>
+ PR tui/30389
+ Bug: https://sourceware.org/bugzilla/show_bug.cgi?id=30389
+
+2023-04-26 Tom Tromey <tromey@adacore.com>
+
+ Rewrite gdb_mpz::operator==
+ Simon pointed out that the recent changes to gdb_mpz caused a build
+ failure on amd64 macOS. It turns out to be somewhat difficult to
+ overload a method in a way that will work "naturally" for all integer
+ types; especially in a case like gdb_mpz::operator==, where it's
+ desirable to special case all integer types that are no wider than
+ 'long'.
+
+ After a false start, I came up with this patch, which seems to work.
+ It applies the desirable GMP special cases directly in the body,
+ rather than via overloads.
+
+ Approved-By: Simon Marchi <simon.marchi@efficios.com>
+
+2023-04-26 Luis Machado <luis.machado@arm.com>
+
+ Updated debug architecture version checks for fbsd
+ There are two new debug architecture version entries. I updated the
+ code for Linux, but fbsd also needs updating.
+
+ This patch does this, and should be pretty straightforward.
+
+ I can't test this on native fbsd, but I'm fairly confident it should
+ work.
+
+2023-04-26 Luis Machado <luis.machado@arm.com>
+
+ Add new debug architecture version
+ Teach gdb about a new debug architecture version for AArch64 (0x11).
+
+ No user-visible changes.
+
+ Regression-tested on aarch64-linux Ubuntu 20.04/22.04.
+
+2023-04-26 Alan Modra <amodra@gmail.com>
+
+ i386-dis.c UB shift and other tidies
+ 1) i386-dis.c:12055:11: runtime error: left shift of negative value -1
+ Bit twiddling is best done unsigned, due to UB on overflow of signed
+ expressions. Fix this by using bfd_vma rather than bfd_signed_vma
+ everywhere in i386-dis.c except print_displacement.
+
+ 2) Return get32s and get16 value in a bfd_vma, reducing the need for
+ temp variables.
+
+ 3) Introduce get16s and get8s functions to simplify the code.
+
+ 4) With some optimisation options gcc-13 legitimately complains about
+ a fall-through in OP_I. Fix that. OP_I also doesn't need to use
+ "mask" which was wrong for w_mode anyway.
+
+ 5) Masking with & 0xffffffff is better than casting to unsigned. We
+ don't know for sure that unsigned int is 32-bit.
+
+ 6) We also don't know that unsigned char is 8 bits. Mask codep
+ accesses everywhere. I don't expect binutils will work on anything
+ other than an 8-bit char host, but if we are masking codep accesses in
+ some places we might as well be consistent. (Better would be to use
+ stdint.h types more in binutils.)
+
+2023-04-26 Alan Modra <amodra@gmail.com>
+
+ binutils runtest $CC
+ I noticed in the binutile Makefile that runtest is being invoked with
+ CC, CC_FOR_BUILD and other compiler related flags in the environment.
+ That doesn't work. Those variables ought to be passed on the runtest
+ command line.
+
+ After fixing that I had some fails due to binutils testprog.c now
+ being compiled with the default "-g -O2" picked up in
+ CFLAGS_FOR_TARGET. Hack around that by passing -O0.
+
+ Also, with the binutils testsuite now taking notice of CC_FOR_TARGET,
+ I found a couple of debuginfod.exp fails with one of my compilers that
+ happened to be built without --debug-id being enabled by default.
+
+ * Makefile.am (check-DEJAGNU): Pass $CC and other variable on
+ the runtest command line rather than futilely in the
+ environment. Add -O0 to CFLAGS_FOR_TARGET.
+ * Makefile.in: Regenerate.
+ * testsuite/binutils-all/debuginfod.exp: Compile testprog.c
+ with -Wl,--build-id.
+
+2023-04-26 Alan Modra <amodra@gmail.com>
+
+ Avoid another -Werror=dangling-pointer
+ write.c:415:7: error: dangling pointer ‘prev_frag’ to ‘dummy’ may be used
+
+ * write.c (chain_frchains_together_1): Rewrite loop as a do
+ while to avoid false positive -Wdangling-pointer.
+
+2023-04-26 GDB Administrator <gdbadmin@sourceware.org>
+
+ Automatic date update in version.in
+
+2023-04-25 Tom Tromey <tromey@adacore.com>
+
+ Use scoped_restore in varobj.c
+ One spot in varobj.c should use scoped_restore to save and restore
+ input_radix. Note that the current code may fail to restore it on
+ error, so this patch fixes a latent bug.
+
+ Approved-By: Simon Marchi <simon.marchi@efficios.com>
+
+2023-04-25 Tom Tromey <tromey@adacore.com>
+
+ Remove some "goto"s from parse.c
+ parser_state::push_dollar has some unnecessary "goto"s. Replacing
+ them cleans up the code. Regression tested on x86-64 Fedora 36.
+
+ Approved-By: Simon Marchi <simon.marchi@efficios.com>
+
+2023-04-25 Michael Matz <matz@suse.de>
+
+ section-select: Fix performance problem (PR30367)
+ when using many wild-statements with non-wildcard filenames we
+ were running into quadraticness via repeatedly using lookup_name
+ on a long list of loaded files. I've originally retained using
+ lookup_name because that preserved existing behaviour most obviously.
+ In particular in matching wild-statements when using a non-wildcard
+ filename it matches against local_sym_name, not the filename member.
+ If the wildspec would have an archive-spec or a wildcard it would use
+ the filename member, though. Also it would load the named file
+ (and ignore it, as being not equal to the currently considered
+ input-statement).
+
+ Rewrite this to not use lookup_name but retain the comparison
+ against local_sym_name with a comment to that effect.
+
+ PR 30367
+ * ldlang.c (walk_wild_section_match): Don't use lookup_name
+ but directly compare spec and local_sym_name.
+
+2023-04-25 Jan Beulich <jbeulich@suse.com>
+
+ RISC-V: adjust logic to avoid register name symbols
+ Special casing GPR names in my_getSmallExpression() leads to a number of
+ inconsistencies. Generalize this by utilizing the md_parse_name() hook,
+ limited to when instruction operands are being parsed (really: probed).
+ Then both the GPR lookup there and the yet more ad hoc workaround for
+ PR/gas 29940 can be removed (including its extension needed for making
+ the compressed form JAL work again).
+
+ RISC-V: test for expected / no unexpected symbols
+ Both the temporary workaround for PR/gas 29940 and the existing special
+ casing of GPRs in my_getSmallExpression() aren't really tested anywhere
+ (i.e. with the workarounds remove testing would still succeed). Nor is
+ there any test for uses of symbols with names matching GPRs, where such
+ is permitted. Before altering how this is to be dealt with, install two
+ testcases covering the expected behavior. (For now this includes only
+ known affected insns; re-ordering of entries in riscv_opcodes[] could,
+ however, yield more of them.)
+
+ RISC-V: don't recognize bogus relocations
+ With my_getSmallExpression() consistently and silently failing on
+ relocation operators not fitting an insn, it is no longer necessary to
+ hand it percent_op_itype[] "just in case" (i.e. to avoid errors when a
+ subsequent parsing attempt for another operand combination might
+ succeed). This also eliminates the latent problem of percent_op_itype[]
+ and percent_op_stype[] growing a non-identical set of recognized
+ relocation operators.
+
+ RISC-V: avoid redundant and misleading/wrong error messages
+ The use of a wrong (for the insn) relocation operator (or a future one
+ which simply isn't recognized by older gas yet) doesn't render the (rest
+ of the) expression "bad". Furthermore alongside the error from
+ expression() in most cases the parser would emit another error then
+ anyway. Suppress the call to my_getExpression() in such a case,
+ arranging for a guaranteed subsequent error message by marking the
+ expression "illegal".
+
+ RISC-V: drop "percent_op" parameter from my_getOpcodeExpression()
+ Both callers check for no relocations, so there's no point parsing for
+ some. Have the function pass percent_op_null into
+ my_getSmallExpression(). Note that there's no point passing
+ percent_op_itype: Elsewhere, especially when processing compressed alias
+ insns ahead of non-alias ones, this has the effect of avoiding "bad
+ expression" errors when another parsing pass may follow (and succeed).
+ Here, however, all alternative forms of an insn type will again start
+ with the same O4 or O2, so avoiding errors earlier on doesn't really
+ help. Plus constructs with a relocation specifier (as percent_op_itype
+ would permit) can't be specified anyway, as the scrubber eats the
+ whitespace between .insn's type and the O4 or O2 expression when that
+ starts with % or ( - i.e. these will be seen as e.g. "i%lo(x)", and
+ riscv_ip() looks only for whitespace when finding the end of a mnemonic.
+
+ RISC-V: minor effort reduction in relocation specifier parsing
+ The sole caller of parse_relocation() has already checked for the %
+ prefix, so there's no need to check for it again in the strncasecmp()
+ and there's also no reason to make the involved string literals longer
+ than necessary.
+
+2023-04-25 Tom de Vries <tdevries@suse.de>
+
+ [gdb/testsuite] Fix timeout in gdb.tui/empty.exp
+ In test-case gdb.tui/empty.exp we run into:
+ ...
+ WARNING: timeout in accept_gdb_output
+ PASS: gdb.tui/empty.exp: src: 90x40: box 1
+ ...
+
+ We timeout here in Term::resize:
+ ...
+ # Due to the strange column resizing behavior, and because we
+ # don't care about this intermediate resize, we don't check
+ # the size here.
+ wait_for "@@ resize done $_resize_count"
+ ...
+ because the string we're trying to match is split over two lines:
+ ...
+ 25 -----------------------------------------------------------------------------+No
+ 26 ne No process In: L?? PC: ?? @@
+ 27 resize done 0, size = 79x40
+ 28 (gdb)
+ ...
+
+ Fix this by dropping the "@@ " prefix.
+
+ Tested on x86_64-linux.
+
+2023-04-25 Tom de Vries <tdevries@suse.de>
+
+ [gdb/testsuite] Fix timeout in gdb.tui/completion.exp
+ With test-case gdb.tui/completion.exp, we run into:
+ ...
+ WARNING: timeout in accept_gdb_output
+ PASS: gdb.tui/completion.exp: check focus completions
+ ...
+
+ The timeout happens in this command:
+ ...
+ Term::command "layout src"
+ ...
+ which waits for:
+ - "(gdb) layout src", and then
+ - "(gdb) ".
+
+ Because the "layout src" command enables the TUI there's just a prompt.
+
+ Fix this by using Term::command_no_prompt_prefix.
+
+ Tested on x86_64-linux.
+
+2023-04-25 Tom de Vries <tdevries@suse.de>
+
+ [gdb/testsuite] Fix timeout in gdb.tui/new-layout.exp
+ In test-case gdb.tui/new-layout.exp we run into:
+ ...
+ WARNING: timeout in accept_gdb_output
+ PASS: gdb.tui/new-layout.exp: layout=cmd_only {cmd 1} {} {}: \
+ bottom of cmd window is blank
+ ...
+
+ The timeout happens here:
+ ...
+ Term::command "layout src"
+ ...
+
+ Before the "layout src" command we have:
+ ...
+ Screen Dump (size 80 columns x 24 rows, cursor at column 46, row 7):
+ 0 +-tui-layout.c-------------------------+(gdb) layout example3
+ 1 | 20 { |(gdb) layout src
+ 2 | 21 return 0; |(gdb) winheight cmd 8
+ 3 | 22 } |(gdb) layout example4
+ 4 | 23 |(gdb) layout src
+ 5 | 24 |(gdb) winheight cmd 8
+ 6 | 25 |(gdb) layout example5
+ 7 | 26 |(gdb)
+ 8 | 27 |
+ 9 | 28 |
+ 10 | 29 |
+ 11 | 30 |
+ 12 | 31 |
+ 13 | 32 |
+ 14 | 33 |
+ 15 | 34 |
+ 16 | 35 |
+ 17 | 36 |
+ 18 | 37 |
+ 19 | 38 |
+ 20 | 39 |
+ 21 | 40 |
+ 22 +--------------------------------------+
+ 23 exec No process In: L?? PC: ??
+ ...
+ and after:
+ ...
+ Screen Dump (size 80 columns x 24 rows, cursor at column 6, row 16):
+ 0 +-tui-layout.c-----------------------------------------------------------------+
+ 1 | 20 { |
+ 2 | 21 return 0; |
+ 3 | 22 } |
+ 4 | 23 |
+ 5 | 24 |
+ 6 | 25 |
+ 7 | 26 |
+ 8 | 27 |
+ 9 | 28 |
+ 10 | 29 |
+ 11 | 30 |
+ 12 | 31 |
+ 13 | 32 |
+ 14 +------------------------------------------------------------------------------+
+ 15 exec No process In: L?? PC: ??
+ 16 (gdb)
+ 17
+ 18
+ 19
+ 20
+ 21
+ 22
+ 23
+ ...
+
+ The Term::command "layout src" is waiting to match:
+ - "(gdb) layout src", and then
+ - "(gdb) ".
+
+ The first part fails to match on a line:
+ ...
+ | 26 |(gdb) layout src
+ ...
+ because it expects the prompt at the start of the line.
+
+ Fix this by allowing the prompt at the start of a window as well.
+
+ Tested by x86_64-linux.
+
+2023-04-25 Tom de Vries <tdevries@suse.de>
+
+ [gdb/testsuite] Fix timeout in gdb.tui/main.exp
+ With test-case gdb.tui/main.exp we run into:
+ ...
+ WARNING: timeout in accept_gdb_output
+ PASS: gdb.tui/main.exp: show main after file
+ ...
+
+ The problem is that this command:
+ ...
+ Term::command "file [standard_output_file $testfile]"
+ ...
+ tries to match "(gdb) $cmd", but due to the long file name, $cmd is split up
+ over two lines:
+ ...
+ 16 (gdb) file /data/vries/gdb/leap-15-4/build/gdb/testsuite/outputs/gdb.tui/main/ma
+ 17 in
+ 18 Reading symbols from /data/vries/gdb/leap-15-4/build/gdb/testsuite/outputs/gdb.t
+ 19 ui/main/main...
+ 20 (gdb)
+ ...
+
+ Fix this by matching "Reading symbols from" instead.
+
+ Tested on x86_64-linux.
+
+2023-04-25 Tom de Vries <tdevries@suse.de>
+
+ [gdb/testsuite] Fix timeout in gdb.tui/corefile-run.exp
+ With test-case gdb.tui/corefile-run.exp we run into:
+ ...
+ WARNING: timeout in accept_gdb_output
+ PASS: gdb.tui/corefile-run.exp: load corefile
+ ...
+
+ The timeout happens in this command:
+ ...
+ Term::command "core-file $core"
+ ...
+ because it tries to match "(gdb) $cmd" but $cmd is split over two lines:
+ ...
+ 16 (gdb) core-file /data/vries/gdb/leap-15-4/build/gdb/testsuite/outputs/gdb.tui/co
+ 17 refile-run/corefile-run.core
+ 18 [New LWP 5370]
+ 19 Core was generated by `/data/vries/gdb/leap-15-4/build/gdb/testsuite/outputs/gdb
+ 20 .tui/corefile-run/coref'.
+ 21 Program terminated with signal SIGTRAP, Trace/breakpoint trap.
+ 22 #0 main () at tui-layout.c:21
+ 23 (gdb)
+ ...
+
+ Fix this by using send_gdb "$cmd\n" and wait_for "Program terminated" instead.
+
+ Tested on x86_64-linux.
+
+2023-04-25 Tom de Vries <tdevries@suse.de>
+
+ [gdb/testsuite] Add debug prints in Term::wait_for
+ The semantics of wait_for are non-trivial, and a bit hard to understand
+ sometimes.
+
+ Add some debug prints in wait_for that make it clear:
+ - what regexps we're trying to match,
+ - what strings we compare to the regexps, and
+ - whether there's a match or mismatch.
+
+ I've added this ad-hoc a couple of times, and it seems that it's worth having
+ readily available.
+
+ The debug prints are enabled by adding DEBUG_TUI_MATCHING=1 to the
+ RUNTESTFLAGS:
+ ...
+ $ make check RUNTESTFLAGS="gdb.tui/empty.exp DEBUG_TUI_MATCHING=1"
+ ...
+
+ Tested on x86_64-linux.
+
+2023-04-25 Tom de Vries <tdevries@suse.de>
+
+ [gdb/testsuite] Add warning for timeout in accept_gdb_output
+ In accept_gdb_output we have:
+ ...
+ timeout {
+ # Assume a timeout means we somehow missed the
+ # expected result, and carry on.
+ return 0
+ }
+ ...
+
+ The timeout is silent, and though in some places the return value is checked,
+ this is not done consistently, and consequently there are silent timeouts
+ when running the TUI testsuite (gdb.tui/*.exp and gdb.python/tui*.exp).
+
+ Each timeout is 10 seconds, and there are 5 in total in the TUI tests, taking
+ 50 seconds overall:
+ ...
+ real 1m0.275s
+ user 0m10.440s
+ sys 0m1.343s
+ ...
+
+ With an entire testsuite run taking about 30 minutes, that is about 2.5% of
+ the time spent waiting in TUI tests.
+
+ Let's make the timeouts visible using a warning, such that they can be fixed.
+
+ Tested on x86_64-linux.
+
+2023-04-25 GDB Administrator <gdbadmin@sourceware.org>
+
+ Automatic date update in version.in
+
+2023-04-24 Tom de Vries <tdevries@suse.de>
+
+ [gdb/testsuite] Fix auto-indent in gdb.gdb/python-helper.exp
+ When editing gdb.gdb/python-helper.exp, auto-indent is broken in my editor
+ (emacs).
+
+ The problem is that this:
+ ...
+ if { 1 } {
+ foo "{" "}"<ENTER>bar
+ }
+ ...
+ produces this:
+ ...
+ if { 1 } {
+ foo "{" "}"
+ bar
+ }
+ ...
+
+ Note that this doesn't happen for "{}".
+
+ Fix this by using "\{" and "\}".
+
+ Tested on x86_64-linux.
+
+2023-04-24 Tom de Vries <tdevries@suse.de>
+
+ [gdb/testsuite] Fix gdb.gdb/python-helper.exp with -O2 -flto
+ On openSUSE Leap 15.4, with gcc 7.5.0, when building gdb with
+ -O2 -g -flto=auto, I run into:
+ ...
+ FAIL: gdb.gdb/python-helper.exp: hit breakpoint in outer gdb
+ FAIL: gdb.gdb/python-helper.exp: print integer from DWARF info
+ FAIL: gdb.gdb/python-helper.exp: print *type->main_type
+ ...
+
+ Fix the first two FAILs by using $bkptno_numopt_re.
+
+ The last FAIL is due to:
+ ...
+ (outer-gdb) print *type->main_type^M
+ A syntax error in expression, near `->main_type'.^M
+ (outer-gdb) FAIL: gdb.gdb/python-helper.exp: print *type->main_type
+ ...
+ because:
+ ...
+ (outer-gdb) print type^M
+ Attempt to use a type name as an expression^M
+ ...
+
+ Fix this by making the test unresolved if "print type" or
+ "print type->main_type" doesn't succeed.
+
+ On openSUSE Tumbleweed, with gcc 13.0.1, when building gdb with
+ -O2 -g -flto=auto, I run into timeouts due to the breakpoint in c_print_type
+ not hitting. Fix this by detecting the situation and bailing out.
+
+ Tested on x86_64-linux.
+
+2023-04-24 Tom de Vries <tdevries@suse.de>
+
+ [gdb/testsuite] Fix -wrap in presence of -prompt in gdb_test_multiple
+ While writing a gdb_test_multiple call in a test-case I tried to use -wrap in
+ combination with -prompt and found out that it doesn't work, because -wrap uses
+ "$gdb_prompt $" instead of $prompt_regexp.
+
+ Fix this by making -wrap use $prompt_regexp.
+
+ Tested on x86_64-linux.
+
+2023-04-24 Simon Marchi <simon.marchi@efficios.com>
+
+ gdb: remove end_stepping_range observable
+ I noticed that this observable was never notified, which means we can
+ probably safely remove it. The notification was removed in:
+
+ commit 243a925328f8e3184b2356bee497181049c0174f
+ Author: Pedro Alves <palves@redhat.com>
+ Date: Wed Sep 9 18:23:24 2015 +0100
+
+ Replace "struct continuation" mechanism by something more extensible
+
+ print_end_stepping_range_reason in turn becomes unused, so remote it as
+ well.
+
+ Change-Id: If5da5149276c282d2540097c8c4327ce0f70431a
+
+2023-04-24 Tom de Vries <tdevries@suse.de>
+
+ [gdb/testsuite] Use -std=gnu99 for gdb.server/attach-flag.exp
+ When using a compiler defaulting to -std=gnu90, we run into:
+ ...
+ Running gdb.server/attach-flag.exp ...
+ gdb compile failed, attach-flag.c: In function 'main':
+ attach-flag.c:22:3: error: 'for' loop initial declarations are only allowed \
+ in C99 or C11 mode
+ for (int i = 0; i < NTHREADS; i++)
+ ^~~
+ attach-flag.c:22:3: note: use option -std=c99, -std=gnu99, -std=c11 or \
+ -std=gnu11 to compile your code
+ ...
+
+ Fix this by using -std=gnu99.
+
+ Tested on x86_64-linux.
+
+2023-04-24 Tom de Vries <tdevries@suse.de>
+
+ [gdb/testsuite] Require GCC >= 5.x.x in gdb.base/utf8-identifiers.exp
+ Test-case gdb.base/utf8-identifiers.exp compiles starting with GCC 5, so
+ require this.
+
+ Tested on x86_64-linux.
+
+2023-04-24 Tom de Vries <tdevries@suse.de>
+
+ [gdb/testsuite] Fix gdb.multi/multi-arch.exp on powerpc64le
+ When running test-case gdb.multi/multi-arch.exp on powerpc64le-linux, I run into:
+ ...
+ Running gdb/testsuite/gdb.multi/multi-arch.exp ...
+ gdb compile failed, In file included from /usr/include/features.h:399:0,
+ from /usr/include/stdio.h:27,
+ from gdb/testsuite/gdb.multi/hangout.c:18:
+ /usr/include/gnu/stubs.h:8:27: fatal error: gnu/stubs-32.h: \
+ No such file or directory
+ # include <gnu/stubs-32.h>
+ ^
+ compilation terminated.
+ ...
+
+ The problem is that the test-case attempts to use gcc -m32 to produce an
+ executable while that's not available.
+
+ Fix this by:
+ - introduce a new caching proc have_compile_and_link_flag, and
+ - using have_compile_and_link_flag in test-case gdb.multi/multi-arch.exp.
+
+ Tested on:
+ - x86_64-linux (openSUSE Leap 15.4), and
+ - powerpc64le-linux (CentOS-7).
+
+2023-04-24 Tom de Vries <tdevries@suse.de>
+
+ [gdb/testsuite] Add basic lmap for tcl < 8.6
+ With test-case gdb.dwarf2/dw2-abs-hi-pc.exp and tcl 8.5, I run into:
+ ...
+ ERROR: tcl error sourcing gdb/testsuite/gdb.dwarf2/dw2-abs-hi-pc.exp.
+ ERROR: invalid command name "lmap"
+ while executing
+ "::gdb_tcl_unknown lmap i {dw2-abs-hi-pc.c dw2-abs-hi-pc-hello.c \
+ dw2-abs-hi-pc-world.c} { expr { "$srcdir/$subdir/$i" } }"
+ ...
+
+ Fix this by adding basic lmap support for tcl version < 8.6.
+
+ Tested on x86_64-linux.
+
+2023-04-24 Tom de Vries <tdevries@suse.de>
+
+ [gdb/testsuite] Don't use string cat in gdb.dwarf2/dw2-abs-hi-pc.exp
+ Test-case gdb.dwarf2/dw2-abs-hi-pc.exp uses string cat:
+ ...
+ set sources [lmap i $sources { string cat "${srcdir}/${subdir}/" $i }]
+ ...
+ but that's only supported starting tcl 8.6.
+
+ Fix this by using "expr" instead:
+ ...
+ set sources [lmap i $sources { expr { "$srcdir/$subdir/$i" } }]
+ ...
+
+ Tested on x86_64-linux.
+
+2023-04-24 Nick Clifton <nickc@redhat.com>
+
+ New georgian translation for the bfd sub-directory
+
+2023-04-24 Alan Modra <amodra@gmail.com>
+
+ Revert "x86: work around compiler diagnosing dangling pointer"
+ This reverts commit 983db9932a302f9e2ae1f1d4fd7c3149560bc269.
+
+2023-04-24 Alan Modra <amodra@gmail.com>
+
+ gcc-13 i386-dis.c warning
+ opcodes/i386-dis.c: In function ‘print_insn’:
+ opcodes/i386-dis.c:9865:22: error: storing the address of local
+ variable ‘priv’ in ‘*info.private_data’ [-Werror=dangling-pointer=]
+
+ * i386-dis.c (print_insn): Clear info->private_data before
+ returning.
+
+2023-04-24 Alan Modra <amodra@gmail.com>
+
+ asan: segfault in coff_mangle_symbols
+ The testcase managed to trigger creation of a wild pointer in
+ coff_slurp_symbol_table. Stop that happening, and fix an unrelated
+ problem I happened to see in bfd_coff_get_syment.
+
+ * coff-bfd.c (bfd_coff_get_syment): Clear fix_value after
+ converting n_value from a pointer to an index.
+ * coffcode.h (coff_slurp_symbol_table <C_BSTAT>): Sanity check
+ symbol value before converting to a pointer.
+
+2023-04-24 Alan Modra <amodra@gmail.com>
+
+ objcopy of archives tidy
+ This makes sure the input element bfd is closed before exiting the
+ loop copying elements.
+
+ * objcopy.c (copy_archive): Rename output_bfd to output_element.
+ Localise last_element. Close this_element in more error cases.
+
+2023-04-24 Tom de Vries <tdevries@suse.de>
+
+ [gdb/testsuite] Skip dap tests for tcl 8.5
+ When running the dap tests on a system with tcl 8.5, we run into:
+ ...
+ ERROR: tcl error sourcing gdb/testsuite/gdb.dap/memory.exp.
+ ERROR: bad class "entier": must be alnum, alpha, ascii, control, boolean, \
+ digit, double, false, graph, integer, list, lower, print, punct, space, \
+ true, upper, wideinteger, wordchar, or xdigit
+ while executing
+ "string is entier $num"
+ (procedure "num" line 16)
+ invoked from within
+ ...
+
+ Fix this by:
+ - requiring tcl 8.6 in allow_dap_tests, and
+ - adding the missing require allow_dap_tests in gdb.dap/memory.exp.
+
+ Tested on x86_64-linux.
+
+2023-04-24 Jan Beulich <jbeulich@suse.com>
+
+ x86: work around compiler diagnosing dangling pointer
+ For quite come time print_insn() has been storing the address of a local
+ variable into info->private_data. Since the compiler can't know that the
+ field won't be accessed again after print_insn() returns, it may kind of
+ legitimately diagnose this. And recent enough gcc does as of the
+ introduction of the fetch_error() return paths (replacing setjmp()-based
+ error handling).
+
+ Utilizing that neither prefix_name() nor i386_dis_printf() actually use
+ info->private_data, zap the pointer in fetch_error(), after having
+ retrieved it for local use.
+
+2023-04-24 GDB Administrator <gdbadmin@sourceware.org>
+
+ Automatic date update in version.in
+
+2023-04-23 YunQiang Su <yunqiang.su@cipunited.com>
+
+ MIPS: fix loongson3 llsc workaround
+ -mfix-looongson3-llsc may add sync instructions not needed on some
+ asm code with lots of debug info.
+
+ PR: 30153
+ * gas/config/tc-mips.c(fix_loongson3_llsc): clear logistic.
+
+2023-04-23 YunQiang Su <yunqiang.su@cipunited.com>
+
+ MIPS: default output r6 obj if the triple is r6
+ If the triple is mipsisa32r6* or mipsisa64r6*, ld/as should output
+ r6 objects by default.
+ The triples with vendor `img` should do same.
+
+ The examples include:
+ as xx.s -o xx.o
+ ld -r -b binary xx.dat -o xx.o
+
+2023-04-23 YunQiang Su <yunqiang.su@cipunited.com>
+
+ MIPS: support mips*64 as CPU and gnuabi64 as ABI
+ For MIPS64r6 ports, Debian as an example, `mipsisa64r6el` is
+ used as the cpu name in triple.
+ Let's recognize them by `mips*64*(el)`.
+
+ For 64bit Ports, like Debian's mips64el and mips64r6el ports,
+ `gnuabi64` is used as the abi section.
+ Let's use N64 abi by default for the triple with gnuabi64.
+
+2023-04-23 mengqinggang <mengqinggang@loongson.cn>
+
+ LoongArch: Fix loongarch32 test fails
+ Regenerated macro_op_32.d and add skip loongarch64-*-*.
+
+ gas/ChangeLog:
+
+ * testsuite/gas/loongarch/macro_op_32.d: Regenerated.
+
+ ld/ChangeLog:
+
+ * testsuite/ld-loongarch-elf/macro_op_32.d: Regenerated.
+
+2023-04-23 GDB Administrator <gdbadmin@sourceware.org>
+
+ Automatic date update in version.in
+
+2023-04-22 Tom de Vries <tdevries@suse.de>
+
+ [gdb/testsuite] Remove debug prints in gdb_find_gdc
+ When running the gdb.dlang test-cases, and forcing gdb_find_gdc to be used
+ rather than dejagnu's copy (mimicing what happens with an older dejagnu
+ without find_gdc), I run into these debug prints:
+ ...
+ Tool Root: /data/vries/gdb/leap-15-4/build
+ CC: gdc
+ ...
+
+ Remove these.
+
+ Tested on x86_64-linux.
+
+2023-04-22 WANG Rui <r@hev.cc>
+
+ gdb: Fix false match issue in skip_prologue_using_linetable
+ [ Changes in v2:
+ - rebase on trunk
+ Changes in v3:
+ - add test-case ]
+
+ We should exclude matches to the ending PC to prevent false matches with the
+ next function, as prologue_end is located at the end PC.
+
+ <fun1>:
+ 0x00: ... <-- start_pc
+ 0x04: ...
+ 0x08: ... <-- breakpoint
+ 0x0c: ret
+ <fun2>:
+ 0x10: ret <-- end_pc | prologue_end of fun2
+
+ Tested on x86_64-linux.
+
+ Co-Authored-By: WANG Rui <r@hev.cc> (fix, tiny change [1])
+ Co-Authored-By: Tom de Vries <tdevries@suse.de> (test-case)
+ Approved-by: Kevin Buettner <kevinb@redhat.com>
+
+ [1] https://www.gnu.org/prep/maintain/html_node/Legally-Significant.html
+
+ PR symtab/30369
+ Bug: https://sourceware.org/bugzilla/show_bug.cgi?id=30369
+
+2023-04-22 GDB Administrator <gdbadmin@sourceware.org>
+
+ Automatic date update in version.in
+
+2023-04-21 Simon Marchi <simon.marchi@efficios.com>
+
+ gdb: remove language_auto
+ I think that the language_auto enumerator and the auto_language class
+ can be removed. There isn't really an "auto" language, it's only a
+ construct of the "set language" command to say "pick the appropriate
+ language automatically". But "auto" is never the current language. The
+ `current_language` points to the current effective language, and the
+ fact that we're in "auto language" mode is noted by the language_mode
+ global.
+
+ - Change set_language to handle the "auto" (and "local", which is a
+ synonym) early, instead of in the for loop. I think it makes the two
+ cases (auto vs explicit language) more clearly separated anyway.
+
+ - Adjust add_set_language_command to hard-code the "auto" string,
+ instead of using the "auto" language definition.
+
+ - Remove auto_language, rename auto_or_unknown_language to
+ unknown_language and move the bits of the existing unknown_language
+ in there.
+
+ - Remove the set_language at the end of _initialize_language. I think
+ it's not needed, because we call set_language in gdb_init, after all
+ _initialize functions are called. There is some chance that an
+ _initialize function that runs after _initialize_language implicitly
+ depends on current_language being set, but my testsuite runs haven't
+ found anything like that.
+
+ - Use language_unknown instead of language_auto when creating a minimal
+ symbol (minimal_symbol_reader::record_full). I think that this value
+ is used to indicate that we don't know the symbol of the minimal
+ symbol (yet), so language_unknown makes sense to me. Update a
+ condition accordingly in ada-lang.c. symbol_find_demangled_name also
+ appears to "normalize" this value from "unknown" to "auto", remove
+ that part and update the condition to just check for
+ language_unknown.
+
+ Change-Id: I47bcd6c15f607d9818f2e6e413053c2dc8ec5034
+ Reviewed-By: Tom Tromey <tom@tromey.com>
+
+2023-04-21 Simon Marchi <simon.marchi@efficios.com>
+
+ gdb: switch "set language" to getter/setter
+ The `language` global variable is mostly a scratch variable used for the
+ setting. The source of truth is really current_language and
+ language_mode (auto vs manual), which are set by the
+ set_language_command callback.
+
+ Switch the setting to use the add_setshow_enum_cmd overload that takes a
+ value getter and setter.
+
+ Change-Id: Ief5b2f93fd7337eed7ec96023639ae3dfe62250b
+ Reviewed-By: Tom Tromey <tom@tromey.com>
+
+2023-04-21 Simon Marchi <simon.marchi@efficios.com>
+
+ gdb: remove return value of set_language
+ set_language returns the previous language, but nothing uses it. Remove
+ the return value. This lets us remove the assignment to
+ current_language, in _initialize_language.
+
+ Change-Id: Ifccf9b488434c1addf4626130a74e159a37d8c17
+ Reviewed-By: Tom Tromey <tom@tromey.com>
+
+2023-04-21 Tom de Vries <tdevries@suse.de>
+
+ [gdb/testsuite] Add make-check-all.sh
+ Directory gdb/testsuite/boards contains a number of host/target boards, which
+ run a test-case (or test-cases) in a different way.
+
+ The benefits of using these boards are:
+ - improving test coverage of gdb,
+ - making the testsuite more robust, and
+ - making sure the test-cases work for non-native and remote setups, if
+ possible.
+
+ Each board is slightly different, and developers need to learn how to use each
+ one, what parameters to pass and how, and which ones can be used in
+ combination with each other. This is a threshold to start using them.
+
+ And then there quite a few, so I suppose typically only a few will be used by
+ each developer.
+
+ Add script gdb/testsuite/make-check-all.sh, that's intended to function as a
+ drop-in replacement of make check, while excercising all host/target boards in
+ gdb/testsuite/boards.
+
+ An example of make-check-all.sh for one test-case is:
+ ...
+ $ ~/gdb/src/gdb/testsuite/make-check-all.sh gdb.base/advance.exp
+ LOCAL:
+ # of expected passes 8
+ TARGET BOARD: cc-with-gdb-index
+ # of expected passes 8
+ ...
+ HOST BOARD: local-remote-host-notty, TARGET BOARD: remote-stdio-gdbserver
+ # of expected passes 8
+ HOST/TARGET BOARD: local-remote-host-native
+ # of expected passes 8
+ ...
+
+ Shell-checked and tested on x86_64-linux.
+
+ Co-Authored-By: Simon Marchi <simon.marchi@efficios.com>
+ Reviewed-By: Andrew Burgess <aburgess@redhat.com>
+
+2023-04-21 Tom de Vries <tdevries@suse.de>
+
+ [gdb/cli] Add maint info screen
+ While working on PRs tui/30337 and cli/30346 I came across various notions of
+ width in gdb, as reported by gdb, readline, curses and the environment
+ variables.
+
+ As for gdb, readline and the environment variables, the way things work
+ is:
+ - Gdb asks readline to detect screen size,
+ - readline sets the actual screen size in the environment variables
+ COLUMNS and LINES,
+ - readline reports back a screen size to gdb, which may have one column
+ less than the actual screen size, to deal with lack of auto-wrap.
+ This becomes gdb's notion of screen size (in other words the point where
+ we can expect the gdb command line to wrap),
+ - Gdb then explicitly sets readline's screen size, which readline itself may
+ adjust to deal with lack of auto-wrap. This becomes readlines notion
+ of screen size (well, internally the unadjusted one, but it'll report back
+ the adjusted one).
+
+ Add a command "maint info screen" that prints these notions, both for width
+ and height.
+
+ For TERM=xterm we have:
+ ...
+ $ TERM=xterm gdb -ex "maint info screen"
+ Number of characters gdb thinks are in a line is 118.
+ Number of characters readline reports are in a line is 118.
+ Number of characters curses thinks are in a line is 118.
+ Number of characters environment thinks are in a line is 118 (COLUMNS).
+ Number of lines gdb thinks are in a page is 27.
+ Number of lines readline reports are in a page is 27.
+ Number of lines curses thinks are in a page is 27.
+ Number of lines environment thinks are in a page is 27 (LINES).
+ ...
+
+ And for TERM=ansi:
+ ...
+ $ TERM=ansi gdb -ex "maint info screen"
+ Number of characters gdb thinks are in a line is 117.
+ Number of characters readline reports are in a line is 116.
+ Number of characters curses thinks are in a line is 118.
+ Number of characters environment thinks are in a line is 118 (COLUMNS).
+ Number of lines gdb thinks are in a page is 27.
+ Number of lines readline reports are in a page is 27.
+ Number of lines curses thinks are in a page is 27.
+ Number of lines environment thinks are in a page is 27 (LINES).
+ ...
+
+ [ The fact that we have "characters readline reports are in a line is 116" is
+ is due to gdb making readline adjust twice for the lack of auto-wrap, this is
+ PR cli/30346.
+
+ Likewise we can detect tui/30337 by doing a resize in TUI mode and doing
+ "maint info screen":
+ ...
+ Number of characters characters curses thinks are in a line is 110.
+ Number of characters environment thinks are in a line is 111 (COLUMNS). ]
+
+ And for TERM=ansi, with width and heigth set to 0:
+ ...
+ Number of characters gdb thinks are in a line is 4294967295 (unlimited).
+ Number of characters readline reports are in a line is 32766 (unlimited - 1).
+ Number of characters curses thinks are in a line is 118.
+ Number of characters environment thinks are in a line is 118 (COLUMNS).
+ Number of lines gdb thinks are in a page is 4294967295 (unlimited).
+ Number of lines readline reports are in a page is 32767 (unlimited).
+ Number of lines curses thinks are in a page is 27.
+ Number of lines environment thinks are in a page is 27 (LINES).
+ ...
+
+ [ Note that when doing a resize by say maximizing or de-maximizing a terminal,
+ all reported values are updated, except for curses when not in TUI mode.
+
+ Maybe that means there's a bug. If not, then maybe we should not print
+ the curses lines unless in TUI mode, or annotate those lines such that it's
+ clear that the values may be not up-to-date. ]
+
+ I'd like to use this command in the regression test for PR cli/30346.
+
+ Tested on x86_64-linux.
+
+ Reviewed-By: Eli Zaretskii <eliz@gnu.org>
+ Reviewed-By: Tom Tromey <tom@tromey.com>
+
+2023-04-21 Tom Tromey <tromey@adacore.com>
+
+ Fix -Wmaybe-uninitialized warning in opcodes/i386-dis.c
+ A recent change in opcodes/i386-dis.c caused a build failure on my
+ x86-64 Fedora 36 system, which uses:
+
+ $ gcc --version
+ gcc (GCC) 12.2.1 20221121 (Red Hat 12.2.1-4)
+ [...]
+
+ The error is:
+
+ ../../binutils-gdb/opcodes/i386-dis.c: In function ‘OP_J’:
+ ../../binutils-gdb/opcodes/i386-dis.c:12705:22: error: ‘val’ may be used uninitialized [-Werror=maybe-uninitialized]
+ 12705 | disp = val & 0x8000 ? val - 0x10000 : val;
+ | ~~~~^~~~~~~~
+
+ This patch fixes the warning.
+
+ opcodes/ChangeLog
+ 2023-04-21 Tom Tromey <tromey@adacore.com>
+
+ * i386-dis.c (OP_J): Check result of get16.
+
+2023-04-21 Tom Tromey <tromey@adacore.com>
+
+ Use entry values for 32-bit PPC struct return
+ AdaCore has a local patch for PPC "finish", but last year, Ulrich
+ Weigand pointed out that this patch was incorrect. It may work for
+ simple functions like the one in the internal test, but nothing
+ guarantees that r3 will be preserved by the callee, so checking r3 on
+ exit is not always correct.
+
+ This patch fixes the problem using the same approach as PPC64: use the
+ entry value of r3, if available. Ulrich confirmed this matches the
+ PPC32 ABI.
+
+2023-04-21 Tom Tromey <tromey@adacore.com>
+
+ Handle erroneous DW_AT_call_return_pc
+ On PPC64, with the test case included in an earlier patch, we found
+ that "finish" would still not correctly find the return value via
+ entry values.
+
+ The issue is simple. The compiler emits:
+
+ 0x00000000100032b8 <+28>: bl 0x1000320c <pck__create_large>
+ 0x00000000100032bc <+32>: nop
+ 0x00000000100032c0 <+36>: li r9,42
+
+ ... but the DWARF says:
+
+ <162a> DW_AT_call_return_pc: 0x100032c0
+
+ That is, the declared return PC is one instruction past the actual
+ return PC.
+
+ This patch adds a new arch hook to handle this scenario, and
+ implements it for PPC64. Some care is taken so that GDB will continue
+ to work if this compiler bug is fixed. A GCC patch is here:
+
+ https://gcc.gnu.org/pipermail/gcc-patches/2023-March/613336.html
+
+ No check for 'nop' is done, as subsequent discussion revealed that the
+ linker might replace this with another instruction.
+
+2023-04-21 Tom Tromey <tromey@adacore.com>
+
+ Handle function descriptors in call_site_target
+ call_site_target::iterate_over_addresses may look up a minimal symbol.
+ On platforms like PPC64 that use function descriptors, this may find
+ an unexpected address. The fix is to use gdbarch_convert_from_func_ptr_addr
+ to convert from a function descriptor to the address recorded at the
+ call site.
+
+ I've added a new test case that is based on the internal AdaCore test
+ that provoked this bug. However, I'm unable to test it as-is on
+ PPC64.
+
+2023-04-21 Jan Beulich <jbeulich@suse.com>
+
+ x86: drop (explicit) BFD64 dependency from disassembler
+ get64() is unreachable when !BFD64 (due to a check relatively early in
+ print_insn()). Let's avoid the associated #ifdef-ary (or else we should
+ extend it to remove more dead code).
+
+ x86: drop use of setjmp() from disassembler
+ With the longjmp() uses all gone, the setjmp() isn't necessary anymore
+ either.
+
+2023-04-21 Jan Beulich <jbeulich@suse.com>
+
+ x86: change fetch error handling for get<N>()
+ Make them return boolean and convert FETCH_DATA() uses to fetch_code().
+ With this no further users of FETCH_DATA() remain, so the macro and its
+ backing function are dropped as well.
+
+ Leave value types as they were for the helper functions, even if I don't
+ think that beyond get64() use of bfd_{,signed_}vma is really necessary.
+ With type change of "disp" in OP_E_memory(), change the 2nd parameter of
+ print_displacement() to a signed type as well, though (eliminating the
+ need for a local variable of signed type). This also eliminates the need
+ for custom printing of '-' in Intel syntax displacement expressions.
+
+ While there drop forward declarations which aren't really needed.
+
+2023-04-21 Jan Beulich <jbeulich@suse.com>
+
+ x86: change fetch error handling when processing operands
+ Make the handler functions all return boolean and convert FETCH_DATA()
+ uses to fetch_code().
+
+ x86: change fetch error handling in get_valid_dis386()
+ Introduce a special error indicator node, for the sole (real) caller
+ to recognize and act upon.
+
+ x86: change fetch error handling in ckprefix()
+ Use a tristate (enum) return value type to be able to express all three
+ cases which are of interest to the (sole) caller. This also allows doing
+ away with the abuse of "rex_used".
+
+2023-04-21 Jan Beulich <jbeulich@suse.com>
+
+ x86: change fetch error handling in top-level function
+ ... and its direct helper get_sib(). Using setjmp()/longjmp() for fetch
+ error handling is problematic, as per
+ https://sourceware.org/pipermail/binutils/2023-March/126687.html. Start
+ using more conventional error handling instead.
+
+ Also introduce a fetch_modrm() helper, for subsequent re-use.
+
+2023-04-21 Jan Beulich <jbeulich@suse.com>
+
+ x86: move fetch error handling into a helper function
+ ... such that it can be used from other than the setjmp() error handling
+ path.
+
+ Since I'd like the function's parameter to be pointer-to-const, two
+ other functions need respective constification then, too (along with
+ needing to be forward-declared).
+
+2023-04-21 Jan Beulich <jbeulich@suse.com>
+
+ bfd: fix STRICT_PE_FORMAT build
+ A semicolon was missing and "name" needs to be pointer-to-const. While
+ adding "const" there, also add it for "sec".
+
+2023-04-21 Lifang Xia <lifang_xia@linux.alibaba.com>
+
+ RISC-V: Optimize relaxation of gp with max_alignment.
+ This should be the first related issue, which posted in riscv-gnu-toolchain,
+ https://github.com/riscv-collab/riscv-gnu-toolchain/issues/497
+
+ If the output sections are not between gp and the symbol, then their alignments
+ shouldn't affect the gp relaxation. However, this patch improves this idea
+ even more, it limits the range to the gp+-2k, which means only the output
+ section which are in the [gp-2K, gp+2K) range need to be considered.
+
+ Even if the output section candidates may be different for each relax passes,
+ the symbol that can be relaxed ar this round will not be truncated at next
+ round. That is because this round you can do relaxation which means that the
+ section where the symbol is located is within the [gp-2K, gp+2K) range, so all
+ the output section alignments between them should be considered. In other
+ words, if the alignments between them may cause truncated, then we should
+ already preserve the size and won't do the gp relaxation this time.
+
+ This patch can resolve the github issue which mentioned above, and also passed
+ all gcc/binutils regressions of riscv-gnu-toolchain, so should be worth and
+ safe enough to commit.
+
+ Originally, this patch also do the same optimization for the call relaxations,
+ https://sourceware.org/pipermail/binutils/2022-October/123918.html
+ But just in case there is something that has not been considered, we only
+ deal with the gp relaxation at this time.
+
+ bfd/
+ * elfnn-riscv.c (riscv_elf_link_hash_table): Added new bfd_vma,
+ max_alignment_for_gp. It is used to record the maximum alignment of
+ the output sections, which are in the [gp-2K, gp+2k) range.
+ (riscv_elf_link_hash_table_create): Init max_alignment_for_gp to -1.
+ (_bfd_riscv_get_max_alignment): Added new parameter, gp. If gp is
+ zero, then all the output section alignments are possible candidates;
+ Otherwise, only the output sections which are in the [gp-2K, gp+2K)
+ range need to be considered.
+ (_bfd_riscv_relax_lui): Called _bfd_riscv_get_max_alignment with the
+ non-zero gp if the max_alignment_for_gp is -1.
+ (_bfd_riscv_relax_pc): Likewise.
+ (_bfd_riscv_relax_section): Record the first input section, so that
+ we can reset the max_alignment_for_gp for each repeated relax passes.
+ ld/
+ * testsuite/ld-riscv-elf/ld-riscv-elf.exp: Updated.
+ * testsuite/ld-riscv-elf/relax-max-align-gp.*: New testcase. It fails
+ without this patch.
+
+2023-04-21 Jan Beulich <jbeulich@suse.com>
+
+ ld: add missing period after @xref
+ At least older versions of one of the doc generation tools complain
+ (warn) about it missing.
+
+2023-04-21 Alan Modra <amodra@gmail.com>
+
+ Keeping track of rs6000-coff archive element pointers
+ rs6000-coff archives use a linked list of file offsets, where each
+ element points to the next element. The idea is to allow updating of
+ large archives quickly without rewriting the whole archive. (binutils
+ ar does not do this.) Unfortunately this is an easy target for
+ fuzzers to create an archive that will cause ar or any other tool
+ processing archives to hang. I'd implemented guards against pointing
+ back to the previous element, but of course that didn't last long.
+
+ So this patch implements a scheme to keep track of file offset ranges
+ used by elements as _bfd_read_ar_hdr is called for each element. See
+ the add_range function comment. I needed a place to stash the list,
+ so chose the obvious artdata.tdata backend extension to archive's
+ tdata, already used by xcoff. That involved a little cleanup, because
+ while it would be possible to continue using different artdata.tdata
+ for the big and small archives, it's nicer to use a union.
+
+ If anyone is concerned this list of element ranges might grow large
+ and thus significantly slow down the tools, adjacent ranges are
+ merged. In fact something like "ar t" will only ever have one range
+ on xcoff archives generated by binutils/ar. I agree there might still
+ be a problem with ld random element access via the armap.
+
+ include/
+ * coff/xcoff.h (SIZEOF_AR_FILE_HDR): Use sizeof.
+ (SIZEOF_AR_FILE_HDR_BIG, SIZEOF_AR_HDR, SIZEOF_AR_HDR_BIG): Likewise.
+ (struct ar_ranges, struct xcoff_artdata): New.
+ (x_artdata): Define.
+ (xcoff_big_format_p): Rewrite.
+ (xcoff_ardata, xcoff_ardata_big): Delete.
+ bfd/
+ * coff-rs6000.c: Replace uses of xcoff_ardata and
+ xcoff_ardata_big throughout file.
+ (_bfd_xcoff_archive_p): Adjust artdata.tdata allocation.
+ (add_range): New function.
+ (_bfd_xcoff_read_ar_hdr): Use it here. Fix memory leak.
+ (_bfd_xcoff_openr_next_archived_file): Remove old sanity
+ checks. Set up range for header.
+ (xcoff_write_archive_contents_old): Make the temporary
+ artdata.tdata used here to pass info down to
+ _bfd_compute_and_write_armap a struct xcoff_artdata.
+ (xcoff_write_archive_contents_big): Likewise.
+ * coff64-rs6000.c: Replace uses of xcoff_ardata and
+ xcoff_ardata_big throughout file.
+ (xcoff64_archive_p): Adjust artdata.tdata allocation.
+
+2023-04-21 Alan Modra <amodra@gmail.com>
+
+ Delete struct artdata archive_head
+ This element is unused. Ideally we'd be moving archive_head and
+ other archive specific fields from struct bfd to here, but that's a
+ much larger change than this little bit of cleanup.
+
+ * libbfd-in.h (struct artdata): Delete archive_head.
+ * libbfd.h: Regenerate.
+ * archive.c,
+ * coff-rs6000.c,
+ * coff64-rs6000.c: Delete comments mentioning artdata archive_head.
+
+2023-04-21 GDB Administrator <gdbadmin@sourceware.org>
+
+ Automatic date update in version.in
+
+2023-04-20 Nick Clifton <nickc@redhat.com>
+
+ Add a SECURITY.txt file describing the GNU Binutils' project's stance on security related bugs.
+
+2023-04-20 Jan Beulich <jbeulich@suse.com>
+
+ x86: adjust an ILP32 testcase using .insn
+ In commit 6967633c8b49 ("x86: convert testcases to use .insn") an ILP32
+ clone of a testcase was missed in the set of tests needing --divide
+ added.
+
+ Reported-by: Clément Chigot <chigot@adacore.com>
+
+2023-04-20 GDB Administrator <gdbadmin@sourceware.org>
+
+ Automatic date update in version.in
+
+2023-04-20 Alan Modra <amodra@gmail.com>
+
+ sh4-linux segfaults running ld testsuite
+ Segmentation fault
+ FAIL: pr22269-1 (static pie undefined weak)
+ and others running "visibility (hidden undef)" tests
+
+ No code has any right to access bfd_link_hash_entry u.def without
+ first checking the type, and SYMBOL_REFERENCES_LOCAL isn't sufficient.
+
+ * elf32-sh.c (sh_elf_finish_dynamic_symbol): Don't use relative
+ relocs in GOT unless symbol is defined.
+
+2023-04-20 Alan Modra <amodra@gmail.com>
+
+ PR30343 infrastructure
+ Make ldemul_before_plugin_all_symbols_read more useful.
+
+ * ldlang.c (lang_process): Move call to
+ ldemul_before_plugin_all_symbols_read outside BFD_SUPPORTS_PLUGINS.
+ Allow backends to add to gc_sym_list before handling entry sym.
+ * ldelf.c (ldelf_before_plugin_all_symbols_read): Test
+ lto_plugin_active.
+
+2023-04-20 Alan Modra <amodra@gmail.com>
+
+ ubsan: signed integer overflow in display_debug_lines_raw
+ This one was caused by me unnecessarily promoting an "int adv" to
+ "int64_t adv". The expression overflowing was 4259 + 9223372036854775807
+ with the left number being unsigned int.
+
+ * dwarf.h (DWARF2_Internal_LineInfo): Replace unsigned short
+ with uint16_t and unsigned char with uint8_t. Make li_line_base
+ an int8_t.
+ * dwarf.c (display_debug_lines_raw): Revert "adv" back to an int.
+
+2023-04-20 Alan Modra <amodra@gmail.com>
+
+ Yet another out-of-memory fuzzed object
+ Do I care about out of memory conditions triggered by fuzzers? Not
+ much. Your operating system ought to be able to handle it by killing
+ the memory hog. Oh well, this one was an element of a coff-alpha
+ archive that said it was a little less that 2**64 in size. The
+ coff-alpha compression scheme expands at most 8 times, so we can do
+ better in bfd_get_file_size.
+
+ * bfdio.c (bfd_get_file_size): Assume elements in compressed
+ archive can only expand a maximum of eight times.
+ * coffgen.c (_bfd_coff_get_external_symbols): Sanity check
+ size of symbol table agains file size.
+
+2023-04-20 Alan Modra <amodra@gmail.com>
+
+ buffer overflow in print_symname
+ * ecoff.c (_bfd_ecoff_slurp_symbolic_info): Zero terminate
+ string sections.
+
+2023-04-19 Indu Bhagat <indu.bhagat@oracle.com>
+
+ libsframe: minor formatting fixes in sframe_encoder_write_fre
+ libsframe/
+ * sframe.c (sframe_encoder_write_fre): Formatting fixes for
+ readability.
+
+ libsframe: use consistent function argument names
+ libsframe/
+ * sframe.c (sframe_decoder_get_header): Use consistent function
+ arg names.
+ (sframe_decoder_free): Likewise.
+ (sframe_encode): Use more appropriate var name.
+
+2023-04-19 Indu Bhagat <indu.bhagat@oracle.com>
+
+ sframe: correct some typos
+ include/
+ * sframe.h: Correct a typo.
+
+ libsframe/
+ * sframe.c: Likewise.
+
+2023-04-19 Indu Bhagat <indu.bhagat@oracle.com>
+
+ libsframe: use return type of bool for predicate functions
+ libsframe/
+ * sframe.c (sframe_header_sanity_check_p): Change return type to
+ bool.
+ (sframe_fre_sanity_check_p): Likewise.
+
+ gas: sframe: fix comment
+
+ gas: sframe: use ATTRIBUTE_UNUSED consistently
+ gas/
+ * gen-sframe.c (sframe_set_version): Use ATTRIBUTE_UNUSED
+ consistently.
+ (output_sframe): Likewise.
+ (sframe_set_fre_info): Remove the usage of ATTRIBUTE_UNUSED.
+
+2023-04-19 Tom Tromey <tromey@adacore.com>
+
+ Remove adjust_type_signedness
+ I happened across adjust_type_signedness, which may be used to modify
+ a type when printing an Ada value. Modifying a type like this is a
+ bad idea -- they should normally be considered immutable. Removing
+ this function still passes both the dejagnu and internal AdaCore
+ tests, though, so this patch drops it.
+
+ As this was reviewed internally, and only affect Ada, I am checking it
+ in.
+
+2023-04-19 Nick Clifton <nickc@redhat.com>
+
+ Fix: readelf: loc_offset XX too big
+ PR 30355
+ * dwarf.c (read_and_display_attr_value): Correctly handle DW_loclistx attributes that index a version 5 .debug_loclists section.
+
+2023-04-19 Jan Beulich <jbeulich@suse.com>
+
+ gas: document that get_symbol_name() can clobber the input buffer
+ Callers which want to make further parsing attempts at the buffer passed
+ to the function need to be aware that due to the potential of string
+ concatenation the input buffer may be altered in ways beyond what can be
+ undone by putting back at *input_line_pointer the character that the
+ function returns.
+
+2023-04-19 Jan Beulich <jbeulich@suse.com>
+
+ x86: parse_register() must not alter the parsed string
+ This reverts the code change done by 100f993c53a5 ("x86: Check
+ unbalanced braces in memory reference"), which wrongly identified
+ e87fb6a6d0cd ("x86/gas: support quoted address scale factor in AT&T
+ syntax") as the root cause of PR gas/30248. (The testcase is left in
+ place, no matter that it's at best marginally useful in that shape.)
+
+ The problem instead is that parse_register() alters the string handed to
+ it, thus breaking valid assumptions in subsequent parsing code. Since
+ the function's behavior is a result of get_symbol_name()'s, make a copy
+ of the incoming string before invoking that function.
+
+ Like for parse_real_register() follow the model of strtol() et al: input
+ string is const-qualified to signal that the string isn't altered, but
+ the returned "end" pointer is not const-qualified, requiring const to be
+ cast away (which generally is a bad idea, but the alternative would
+ again be more convoluted code).
+
+2023-04-19 Jan Beulich <jbeulich@suse.com>
+
+ x86: parse_real_register() does not alter the parsed string
+ Follow the model of strtol() et al - input string is const-qualified to
+ signal that the string isn't altered, but the returned "end" pointer is
+ not const-qualified, requiring const to be cast away (which generally is
+ a bad idea, but the alternative would be more convoluted code).
+
+2023-04-19 Nick Clifton <nickc@redhat.com>
+
+ Updated Hungarian translation for the gprof directory
+
+2023-04-19 GDB Administrator <gdbadmin@sourceware.org>
+
+ Automatic date update in version.in
+
+2023-04-18 Simon Marchi <simon.marchi@efficios.com>
+
+ gdb: re-format Python code with black 23
+ Change-Id: I849d10d69c254342bf01e955ffe62a2b60f9de4b
+
+2023-04-18 Carl Love <cel@us.ibm.com>
+
+ PowerPC: fix _Float128 type output string
+ PowerPC supports two 128-bit floating point formats, the IBM long double
+ and IEEE 128-bit float. The issue is the DWARF information does not
+ distinguish between the two. There have been proposals of how to extend
+ the DWARF information as discussed in
+
+ https://gcc.gnu.org/bugzilla/show_bug.cgi?id=104194
+
+ but has not been fully implemented.
+
+ GCC introduced the _Float128 internal type as a work around for the issue.
+ The workaround is not transparent to GDB. The internal _Float128 type
+ name is printed rather then the user specified long double type. This
+ patch adds a new gdbarch method to allow PowerPC to detect the GCC
+ workaround. The workaround checks for "_Float128" name when reading the
+ base typedef from the die_info. If the workaround is detected, the type
+ and format fields from the _Float128 typedef are copied to the long
+ double typedef. The same is done for the complex long double typedef.
+
+ This patch fixes 74 regression test failures in
+ gdb.base/whatis-ptype-typedefs.exp on PowerPC with IEEE float 128 as the
+ default on GCC. It fixes one regression test failure in
+ gdb.base/complex-parts.exp.
+
+ The patch has been tested on Power 10 where GCC defaults to IEEE Float
+ 128-bit and on Power 10 where GCC defaults to the IBM 128-bit float. The
+ patch as also been tested on X86-64 with no new regression failures.
+
+2023-04-18 mengqinggang <mengqinggang@loongson.cn>
+
+ Symbols with GOT relocatios do not fix adjustbale
+ gas
+ * config/tc-loongarch.c (loongarch_fix_adjustable): Symbols with GOT relocatios do not fix adjustbale.
+ * testsuite/gas/loongarch/macro_op_large_abs.d: Regenerated.
+ * testsuite/gas/loongarch/macro_op_large_pc.d: Regenerated.
+ ld
+ * testsuite/ld-loongarch-elf/macro_op.d: Regenerated. -
+
+2023-04-18 Thomas Koenig <tkoenig@netcologne.de>
+
+ Assembler Internal Docs: Describe handling of opcodes for relaxation a bit better.
+
+2023-04-18 Kito Cheng <kito.cheng@sifive.com>
+
+ RISC-V: Cache the latest mapping symbol and its boundary.
+ This issue was reported from https://github.com/riscv-collab/riscv-gnu-toolchain/issues/1188
+
+ Current flow:
+ 1) Scan any mapping symbol less than this instruciton.
+ 2) If not found, did a backward search.
+
+ The flow seems not big issue, let run an example here:
+
+ $x:
+ 0x0 a <--- Found at step 1
+ 0x4 b <--- Not found in step 1, but found at step 2
+ 0x8 c <--- Not found in step 1, but found at step 2
+ $d
+ 0x12 .word 1234 <-- Found at step 1
+
+ The instruciton didn't have the same address with mapping symbol will
+ still did backward search again and again.
+
+ So the new flow is:
+ 1) Use the last mapping symbol status if the address is still within the range
+ of the current mapping symbol.
+ 2) Scan any mapping symbol less than this instruciton.
+ 3) If not found, did a backward search.
+ 4) If a proper mapping symbol is found in either step 2 or 3, find its boundary,
+ and cache that.
+
+ Use the same example to run the new flow again:
+
+ $x:
+ 0x0 a <--- Found at step 2, the boundary is 0x12
+ 0x4 b <--- Cache hit at step 1, within the boundary.
+ 0x8 c <--- Cache hit at step 1, within the boundary.
+ $d
+ 0x12 .word 1234 <-- Found at step 2, the boundary is the end of section.
+
+ The disassemble time of the test cases has been reduced from ~20 minutes to ~4
+ seconds.
+
+ opcode/ChangeLog
+ PR 30282
+ * riscv-dis.c (last_map_symbol_boundary): New.
+ (last_map_state): New.
+ (last_map_section): New.
+ (riscv_search_mapping_symbol): Cache the result of latest
+ mapping symbol.
+
+2023-04-18 Alan Modra <amodra@gmail.com>
+
+ objdump use of uninitialised value in pr_string_field
+ PR 30365
+ * rdcoff.c (parse_coff_struct_type): Leave bitsize zero when no
+ auxents.
+
+ objdump buffer overflow in fetch_indexed_string
+ PR 30361
+ * dwarf.c (fetch_indexed_string): Sanity check string index.
+
+2023-04-18 GDB Administrator <gdbadmin@sourceware.org>
+
+ Automatic date update in version.in
+
+2023-04-17 Vladimir Mezentsev <vladimir.mezentsev@oracle.com>
+
+ gprofng: 30360 Seg. Fault when application uses std::thread
+ We interpose a lot of libC functions (dlopen, fork, pthread_create, etc.).
+ Some of these functions have versions. For example,
+
+ % nm -D /lib64/gprofng/libgp-collector.so | grep thread_create@ | sort
+ 000000000004b420 T pthread_create@GLIBC_2.34
+ 000000000004b490 T pthread_create@GLIBC_2.17
+ 000000000004b500 T pthread_create@GLIBC_2.2.5
+ 000000000004b570 T pthread_create@GLIBC_2.1
+ 000000000004b5e0 T pthread_create@GLIBC_2.0
+
+ Our library does not set the default version for symbols.
+ This is correct because we don't know which libC will be used.
+
+ gcc and g++ links differently the version symbols when the default version is
+ not set. c-linker is using our pthread_create@GLIBC_2.34 and c++-linker is using
+ our pthread_create@GLIBC_2.0 by default.
+
+ The current implementation of the interposed functions is:
+ If we are in our pthread_create@GLIBC_<NN>,
+ we use dlvsym (dlflag, "pthread_create", "GLIBC_<NN>") to find and call
+ the same function from libC.
+ In the test from PR 30360, pthread_create@GLIBC_2.0 is not in the current libC.
+ We need to call the default version symbol from libC.
+
+ gprofng/ChangeLog
+ 2023-04-16 Vladimir Mezentsev <vladimir.mezentsev@oracle.com>
+
+ PR gprofng/30360
+ * libcollector/iotrace.c: Find and call a default libC version symbol.
+ * libcollector/dispatcher.c: Likewise.
+ * libcollector/iotrace.c: Likewise.
+ * libcollector/linetrace.c: Likewise.
+ * libcollector/mmaptrace.c: Likewise.
+ * libcollector/synctrace.c: Likewise.
+ * libcollector/collector.h (REAL_DCL): Remove an unused argument.
+
+2023-04-17 Vladimir Mezentsev <vladimir.mezentsev@oracle.com>
+
+ gprofng: Update documentation
+ This patch addresses bugzilla 29521:
+ Bug 29521 - [docs] man pages are not in the release tarball
+
+ The dependence on help2man to create the man pages has been eliminated.
+ All man pages are now written in Texinfo. Texi2pod and pod2man are used
+ to generate the man pages from the source.
+
+ The user guide has been significantly expanded. It also includes all
+ the man pages. These are formatted appropriately in the INFO, PDF, and
+ HTML formats.
+
+ The index in the user guide has been enhanced to include an overview
+ of all options and commands that have been documented so far.
+
+ The work on the documentation has not been completed, but this is
+ a significant step forward.
+
+ gprofng/ChangeLog
+ 2023-04-15 Vladimir Mezentsev <vladimir.mezentsev@oracle.com>
+
+ PR gprofng/29521
+ * doc/Makefile.am: Build documentation.
+ * doc/gprofng.texi: Update documentation.
+ * doc/version.texi: Likewise.
+ * src/Makefile.am: Move the man pages generation to doc/Makefile.am.
+ * gp-display-html/Makefile.am: Likewise.
+ * doc/gp-archive.texi: New file.
+ * doc/gp-collect-app.texi: New file.
+ * doc/gp-display-html.texi: New file.
+ * doc/gp-display-src.texi: New file.
+ * doc/gp-display-text.texi: New file.
+ * doc/gp-macros.texi: New file.
+ * doc/gprofng_ug.texi: New file.
+ * doc/Makefile.in: Rebuild.
+ * gp-display-html/Makefile.in: Rebuild.
+ * src/Makefile.in" Rebuild.
+
+2023-04-17 Tom Tromey <tromey@adacore.com>
+
+ Remove some unnecessary casts from ada-lang.c
+ I noticed some unnecessary casts to LONGEST in ada-lang.c. This patch
+ removes the ones I think are very clearly not needed. I'm checking
+ this in as obvious.
+
+2023-04-17 Simon Marchi <simon.marchi@efficios.com>
+
+ gdb/amdgpu: add follow fork and exec support
+ Prior to this patch, it's not possible for GDB to debug GPU code in fork
+ children or after an exec. The amd-dbgapi target attaches to processes
+ when an inferior appears due to a "run" or "attach" command, but not
+ after a fork or exec. This patch adds support for that, such that it's
+ possible to for an inferior to fork and for GDB to debug the GPU code in
+ the child.
+
+ To achieve that, use the inferior_forked and inferior_execd observers.
+
+ In the case of fork, we have nothing to do if `child_inf` is nullptr,
+ meaning that GDB won't debug the child. We also don't attach if the
+ inferior has vforked. We are already attached to the parent's address
+ space, which is shared with the child, so trying to attach would cause
+ problems. And anyway, the inferior can't do anything other than exec or
+ exit, it certainly won't start GPU kernels before exec'ing.
+
+ In the case of exec, we detach from the exec'ing inferior and attach to
+ the following inferior. This works regardless of whether they are the
+ same or not. If they are the same, meaning the execution continues in
+ the existing inferior, we need to do a detach/attach anyway, as
+ amd-dbgapi needs to be aware of the new address space created by the
+ exec.
+
+ Note that we use observers and not target_ops::follow_{fork,exec} here.
+ When the amd-dbgapi target is compiled in, it will attach (in the
+ amd_dbgapi_process_attach sense, not the ptrace sense) to native
+ inferiors when they appear, but won't push itself on the inferior's
+ target stack just yet. It only pushes itself if the inferior
+ initializes the ROCm runtime. So, if a non-GPU-using inferior calls
+ fork, an amd_dbgapi_target::follow_fork method would not get called.
+ Same for exec. A previous version of the code had the amd-dbgapi target
+ pushed all the time, in which case we could use the target methods. But
+ we prefer having the target pushed only when necessary, it's less
+ intrusive when doing native debugging that doesn't involve the GPU.
+
+ Change-Id: I5819c151c371120da8bab2fa9cbfa8769ba1d6f9
+ Reviewed-By: Pedro Alves <pedro@palves.net>
+
+2023-04-17 Simon Marchi <simon.marchi@efficios.com>
+
+ gdb: switch to right inferior in fetch_inferior_event
+ The problem explained and fixed in the previous patch could have also
+ been fixed by this patch. But I think it's good change anyhow, that
+ could prevent future bugs, so here it is.
+
+ fetch_inferior_event switches to an arbitrary (in practice, the first) inferior
+ of the process target of the inferior used to fetch the event. The idea is
+ that the event handling code will need to do some target calls, so we want to
+ switch to an inferior that has target target.
+
+ However, you can have two inferiors that share a process target, but with one
+ inferior having an additional target on top:
+
+ inf 1 inf 2
+ ----- -----
+ another target
+ process target process target
+ exec exec
+
+ Let's say inferior 2 is selected by do_target_wait and returns an event that is
+ really synthetized by "another target". This "another target" could be a
+ thread or record stratum target (in the case explained by the previous patch,
+ it was the arch stratum target, but it's because the amd-dbgapi abuses the arch
+ layer). fetch_inferior_event will then switch to the first inferior with
+ "process target", so inferior 1. handle_signal_stop then tries to fetch the
+ thread's registers:
+
+ ecs->event_thread->set_stop_pc
+ (regcache_read_pc (get_thread_regcache (ecs->event_thread)));
+
+ This will try to get the thread's register by calling into the current target
+ stack, the stack of inferior 1. This is problematic because "another target"
+ might have a special fetch_registers implementation.
+
+ I think it would be a good idea to switch to the inferior for which the
+ even was reported, not just some inferior of the same process target.
+ This will ensure that any target call done before we eventually call
+ context_switch will be done on the full target stack that reported the
+ event.
+
+ Not all events are associated to an inferior though. For instance,
+ TARGET_WAITKIND_NO_RESUMED. In those cases, some targets return
+ null_ptid, some return minus_one_ptid (ideally the expected return value
+ should be clearly defined / documented). So, if the ptid returned is
+ either of these, switch to an arbitrary inferior with that process
+ target, as before.
+
+ Change-Id: I1ffc8c1095125ab591d0dc79ea40025b1d7454af
+ Reviewed-By: Pedro Alves <pedro@palves.net>
+
+2023-04-17 Simon Marchi <simon.marchi@efficios.com>
+
+ gdb: make regcache::raw_update switch to right inferior
+ With the following patch, which teaches the amd-dbgapi target to handle
+ inferiors that fork, we end up with target stacks in the following
+ state, when an inferior that does not use the GPU forks an inferior that
+ eventually uses the GPU.
+
+ inf 1 inf 2
+ ----- -----
+ amd-dbgapi
+ linux-nat linux-nat
+ exec exec
+
+ When a GPU thread from inferior 2 hits a breakpoint, the following
+ sequence of events would happen, if it was not for the current patch.
+
+ - we start with inferior 1 as current
+ - do_target_wait_1 makes inferior 2 current, does a target_wait, which
+ returns a stop event for an amd-dbgapi wave (thread).
+ - do_target_wait's scoped_restore_current_thread restores inferior 1 as
+ current
+ - fetch_inferior_event calls switch_to_target_no_thread with linux-nat
+ as the process target, since linux-nat is officially the process
+ target of inferior 2. This makes inferior 1 the current inferior, as
+ it's the first inferior with that target.
+ - In handle_signal_stop, we have:
+
+ ecs->event_thread->suspend.stop_pc
+ = regcache_read_pc (get_thread_regcache (ecs->event_thread));
+
+ context_switch (ecs);
+
+ regcache_read_pc executes while inferior 1 is still the current one
+ (because it's before the `context_switch`). This is a problem,
+ because the regcache is for a ptid managed by the amd-dbgapi target
+ (e.g. (12345, 1, 1)), a ptid that does not make sense for the
+ linux-nat target. The fetch_registers target call goes directly
+ to the linux-nat target, which gets confused.
+ - We would then get an error like:
+
+ Couldn't get extended state status: No such process.
+
+ ... since linux-nat tries to do a ptrace call on tid 1.
+
+ GDB should switch to the inferior the ptid belongs to before doing the
+ target call to fetch registers, to make sure the call hits the right
+ target stack (it should be handled by the amd-dbgapi target in this
+ case). In fact the following patch does this change, and it would be
+ enough to fix this specific problem.
+
+ However, I propose to change regcache to make it switch to the right
+ inferior, if needed, before doing target calls. That makes the
+ interface as a whole more independent of the global context.
+
+ My first attempt at doing this was to find an inferior using the process
+ stratum target and the ptid that regcache already knows about:
+
+ gdb::optional<scoped_restore_current_thread> restore_thread;
+ inferior *inf = find_inferior_ptid (this->target (), this->ptid ());
+ if (inf != current_inferior ())
+ {
+ restore_thread.emplace ();
+ switch_to_inferior_no_thread (inf);
+ }
+
+ However, this caused some failures in fork-related tests and gdbserver
+ boards. When we detach a fork child, we may create a regcache for the
+ child, but there is no corresponding inferior. For instance, to restore
+ the PC after a displaced step over the fork syscall. So
+ find_inferior_ptid would return nullptr, and
+ switch_to_inferior_no_thread would hit a failed assertion.
+
+ So, this patch adds to regcache the information "the inferior to switch
+ to to makes target calls". In typical cases, it will be the inferior
+ that matches the regcache's ptid. But in some cases, like the detached
+ fork child one, it will be another inferior (in this example, it will be
+ the fork parent inferior).
+
+ The problem that we witnessed was in regcache::raw_update specifically,
+ but I looked for other regcache methods doing target calls, and added
+ the same inferior switching code to raw_write too.
+
+ In the regcache constructor and in get_thread_arch_aspace_regcache,
+ "inf_for_target_calls" replaces the process_stratum_target parameter.
+ We suppose that the process stratum target that would be passed
+ otherwise is the same that is in inf_for_target_calls's target stack, so
+ we don't need to pass both in parallel. The process stratum target is
+ still used as a key in the `target_pid_ptid_regcache_map` map, but
+ that's it.
+
+ There is one spot that needs to be updated outside of the regcache code,
+ which is the path that handles the "restore PC after a displaced step in
+ a fork child we're about to detach" case mentioned above.
+
+ regcache_test_data needs to be changed to include full-fledged mock
+ contexts (because there now needs to be inferiors, not just targets).
+
+ Change-Id: Id088569ce106e1f194d9ae7240ff436f11c5e123
+ Reviewed-By: Pedro Alves <pedro@palves.net>
+
+2023-04-17 Simon Marchi <simon.marchi@efficios.com>
+
+ gdb: add maybe_switch_inferior function
+ Add the maybe_switch_inferior function, which ensures that the given
+ inferior is the current one. Return an instantiated
+ scoped_restore_current_thread object only we actually needed to switch
+ inferior.
+
+ Returning a scoped_restore_current_thread requires it to be
+ move-constructible, so give it a move constructor.
+
+ Change-Id: I1231037102ed6166f2530399e8257ad937fb0569
+ Reviewed-By: Pedro Alves <pedro@palves.net>
+
+2023-04-17 Simon Marchi <simon.marchi@efficios.com>
+
+ gdb: remove regcache::target
+ The regcache class takes a process_stratum_target and then exposes it
+ through regcache::target. But it doesn't use it itself, suggesting it
+ doesn't really make sense to put it there. The only user of
+ regcache::target is record_btrace_target::fetch_registers, but it might
+ as well just get it from the current target stack. This simplifies a
+ little bit a patch later in this series.
+
+ Change-Id: I8878d875805681c77f469ac1a2bf3a508559a62d
+ Reviewed-By: Pedro Alves <pedro@palves.net>
+
+2023-04-17 Simon Marchi <simon.marchi@efficios.com>
+
+ gdb: add inferior_forked observable
+ In the upcoming patch to support fork in the amd-dbgapi target, the
+ amd-dbgapi target will need to be notified of fork events through an
+ observer, to attach itself (attach in the amd-dbgapi sense, not ptrace
+ sense) to the new inferior / process.
+
+ The reason that this can't be done through target_ops::follow_fork is
+ that the amd-dbgapi target isn't pushed on the inferior's target stack
+ right away. It attaches itself to the process and only pushes itself on
+ its target stack if and when the inferior initializes the ROCm runtime.
+
+ If an inferior that is not using the ROCm runtime forks, we want to be
+ notified of it, so we can attach to the child, and catch if the child
+ starts using the ROCm runtime.
+
+ So, add a new observable and notify it in follow_fork_inferior. It will
+ be used later in this series.
+
+ Change-Id: I67fced5a9cba6d5da72b9c7ea1c8397644ca1d54
+ Reviewed-By: Pedro Alves <pedro@palves.net>
+
+2023-04-17 Simon Marchi <simon.marchi@efficios.com>
+
+ gdb: pass execing and following inferior to inferior_execd observers
+ The upcoming patch to support exec in the amd-dbgapi target needs to
+ detach amd-dbgapi from the inferior doing the exec and attach amd-dbgapi
+ to the inferior continuing the execution. They may or may not be the
+ same, depending on the `set follow-exec-mode` setting. But even if they
+ are the same, we need to do the detach / attach dance.
+
+ With the current observable signature, the observers only receive the
+ inferior in which execution continues (the "following" inferior).
+
+ Change the signature to pass both inferiors, and update all existing
+ observers.
+
+ Change-Id: I259d1ea09f70f43be739378d6023796f2fce2659
+ Reviewed-By: Pedro Alves <pedro@palves.net>
+
+2023-04-17 Tom Tromey <tromey@adacore.com>
+
+ Add 128-bit integer support to the Ada parser
+ This adds support for 128-bit integers to the Ada parser.
+
+ Bug: https://sourceware.org/bugzilla/show_bug.cgi?id=30188
+
+2023-04-17 Tom Tromey <tromey@adacore.com>
+
+ Remove some Ada parser helper functions
+ These helper functions in the Ada parser don't seem all that
+ worthwhile to me, so this patch removes them.
+
+ Add overload of fits_in_type
+ This adds an overload of fits_in_type that accepts a gdb_mpz. A
+ subsequent patch will use this.
+
+2023-04-17 Tom Tromey <tromey@adacore.com>
+
+ Add 128-bit integer support to the Rust parser
+ This adds support for 128-bit integers to the Rust parser.
+
+ Bug: https://sourceware.org/bugzilla/show_bug.cgi?id=21185
+
+2023-04-17 Tom Tromey <tromey@adacore.com>
+
+ Convert long_const_operation to use gdb_mpz
+ This changes long_const_operation to use gdb_mpz for its storage.
+
+2023-04-17 Tom Tromey <tromey@adacore.com>
+
+ Additions to gdb_mpz
+ In preparation for adding more 128-bit support to gdb, a few additions
+ to gdb_mpz are needed.
+
+ First, this adds a new 'as_integer_truncate' method. This method
+ works like 'as_integer' but does not require the value to fit in the
+ target type -- it just truncates.
+
+ Second, gdb_mpz::export_bits is changed to handle the somewhat unusual
+ situation of zero-length types. This can happen for a Rust '()' type;
+ but I think other languages have zero-bit integer types as well.
+
+ Finally, this adds some operator== overloads.
+
+2023-04-17 Nick Clifton <nickc@redhat.com>
+
+ Make the .rsrc section read only.
+ PR 30142
+ * peXXigen.c (_bfd_XXi_swap_scnhdr_out): Do not force the .rsrc section to be writeable.
+ * rescoff.c (write_coff_file): Add the SEC_READONLY flag to the .rsrc section.
+
+2023-04-17 Tom de Vries <tdevries@suse.de>
+
+ [gdb/symtab] Handle empty file name in .debug_line section
+ With DWARF 5, it's possible to produce an empty file name in the File Name
+ Table of the .debug_line section:
+ ...
+ The File Name Table (offset 0x112, lines 1, columns 2):
+ Entry Dir Name
+ 0 1 (indirect line string, offset: 0x2d):
+ ...
+
+ Currently, when gdb reads an exec containing such debug info, it segfaults:
+ ...
+ Thread 1 "gdb" received signal SIGSEGV, Segmentation fault.
+ 0x000000000072cd38 in dwarf2_start_subfile (cu=0x2badc50, fe=..., lh=...) at \
+ gdb/dwarf2/read.c:18716
+ 18716 if (!IS_ABSOLUTE_PATH (filename) && dirname != NULL)
+ ...
+ because read_direct_string transforms "" into a nullptr, and we end up
+ dereferencing the nullptr.
+
+ Note that the behaviour of read_direct_string has been present since repo
+ creation.
+
+ Fix this in read_formatted_entries, by transforming nullptr filenames in to ""
+ filenames.
+
+ Tested on x86_64-linux.
+
+ Reviewed-By: Tom Tromey <tom@tromey.com>
+
+ PR symtab/30357
+ Bug: https://sourceware.org/bugzilla/show_bug.cgi?id=30357
+
+2023-04-17 Nick Clifton <nickc@redhat.com>
+
+ Add support for the .gnu.sgstubs section to the linker for ARM/ELF based targets.
+ PR 30354
+ * emulparams/armelf.sh (OTHER_PLT_SECTIONS): Define in order to handle the .gnu.sgstubs section.
+
+2023-04-17 GDB Administrator <gdbadmin@sourceware.org>
+
+ Automatic date update in version.in
+
+2023-04-16 GDB Administrator <gdbadmin@sourceware.org>
+
+ Automatic date update in version.in
+
+2023-04-15 GDB Administrator <gdbadmin@sourceware.org>
+
+ Automatic date update in version.in
+
+2023-04-14 Andrew Burgess <aburgess@redhat.com>
+
+ gdb/testsuite: accept script argument for mi_make_breakpoint_pending
+ This commit changes mi_make_breakpoint_pending to accept the 'script'
+ and 'times' arguments.
+
+ I've then added a new test that makes use of 'scripts' in
+ gdb.mi/mi-pending.exp and gdb.mi/mi-dprintf-pending.exp.
+
+ There is already a test in gdb.mi/mi-pending.exp that uses the 'times'
+ argument -- previously this argument was being ignored, but is now
+ used.
+
+ Reviewed-By: Tom Tromey <tom@tromey.com>
+
+2023-04-14 Andrew Burgess <aburgess@redhat.com>
+
+ gdb/testsuite: avoid {"} pattern in lib/mi-support.exp
+ Commit:
+
+ commit c569a946f6925d3f210c3eaf74dcda56843350ef
+ Date: Fri Mar 24 10:45:37 2023 +0100
+
+ [gdb/testsuite] Fix unbalanced quotes in mi_expect_stop argument
+
+ Introduced the use of {"} in mi-support.exp. There is absolutely
+ nothing wrong with this in any way. However, this is causing my
+ editor to get the syntax highlighting of this file wrong after this
+ point.
+
+ Maybe the real answer is to use a better editor, or fix my current
+ editor.... but I'm hoping I can instead take the lazy approach of just
+ changing {"} to "\"", which is handled fine, and means exactly the
+ same as far as I understand it.
+
+ There should be no change in what is tested after this commit.
+
+ Reviewed-By: Tom Tromey <tom@tromey.com>
+
+2023-04-14 Luis Machado <luis.machado@arm.com>
+
+ pauth: Create new feature string for pauth to prevent crashing older gdb's
+ Older gdb's (9, 10, 11 and 12) have a bug that causes them to crash whenever
+ a target reports the pauth feature string in the target description and also
+ provide additional register outside of gdb's known and expected feature
+ strings.
+
+ This was fixed in gdb 13 onwards, but that means we're stuck with gdb's out
+ there that will crash on connection to the above targets.
+
+ QEMU has postponed inclusion of the pauth feature string in version 8, and
+ instead we agreed to use a new feature name to prevent crashing those older
+ gdb's.
+
+ Initially there was a plan to backport a trivial fix all the way to gdb 9, but
+ given QEMU's choice, this is no longer needed.
+
+ This new feature string is org.gnu.gdb.aarch64.pauth_v2, and should be used
+ by all targets going forward, except native linux gdb and gdbserver, for
+ backwards compatibility with older gdb's/gdbserver's.
+
+ gdb/gdbserver will still emit the old feature string for Linux since it doesn't
+ report additional system registers and thus doesn't cause a crash of older
+ gdb's. We can revisit this in the future once the problematic gdb's are likely
+ no longer in use.
+
+ I've added some documentation to explain the situation.
+
+2023-04-14 Luis Machado <luis.machado@arm.com>
+
+ debug registers: Add missing debug version entry for FEAT_Debugv8p8
+ The Arm Architecture Reference Manual defines debug version 0b1010 for
+ FEAT_Debugv8p8. This is used to identify valid hardware debug registers.
+
+ gdb currently only knows about versions up to FEAT_Debugv8p4. This patch
+ teaches gdb about this new version.
+
+ No visible changes should happen as consequence of this patch, but in the
+ future gdb will be able to identify debug registers in newer hardware.
+
+ Regression-tested on aarch64-linux Ubuntu 20.04/22.04.
+
+2023-04-14 Hui Li <lihui@loongson.cn>
+
+ gdb/testsuite: Skip dump ihex for 64-bit address in gdb.base/dump.exp
+ (1) Description of problem
+
+ In the current code, when execute the following test on LoongArch:
+
+ $make check-gdb TESTS="gdb.base/dump.exp"
+ ```
+ FAIL: gdb.base/dump.exp: dump array as value, intel hex
+ FAIL: gdb.base/dump.exp: dump struct as value, intel hex
+ FAIL: gdb.base/dump.exp: dump array as memory, ihex
+ FAIL: gdb.base/dump.exp: dump struct as memory, ihex
+
+ ```
+ These tests passed on the X86_64,
+
+ (2) Root cause
+
+ On LoongArch, variable intarray address 0x120008068 out of range for IHEX,
+ so dump ihex test failed.
+
+ gdb.base/dump.exp has the following code to check 64-bit address
+
+ ```
+ # Check the address of a variable. If it is bigger than 32-bit,
+ # assume our target has 64-bit addresses that are not supported by SREC,
+ # IHEX and TEKHEX. We skip those tests then.
+ set max_32bit_address "0xffffffff"
+ set data_address [get_hexadecimal_valueof "&intarray" 0x100000000]
+ if {${data_address} > ${max_32bit_address}} {
+ set is64bitonly "yes"
+ }
+ ```
+
+ We check the "&intarray" on different target as follow:
+
+ ```
+ $gdb gdb/testsuite/outputs/gdb.base/dump/dump
+ ...
+ (gdb) start
+ ...
+
+ On X86_64:
+ (gdb) print /x &intarray
+ $1 = 0x404060
+
+ On LoongArch:
+ (gdb) print /x &intarray
+ $1 = 0x120008068
+ ```
+ The variable address difference here is due to the link script
+ of linker.
+
+ ```
+ On X86_64:
+ $ld --verbose
+ ...
+ PROVIDE (__executable_start = SEGMENT_START("text-segment", 0x400000));
+ . = SEGMENT_START("text-segment", 0x400000) + SIZEOF_HEADERS;
+
+ On LoongArch:
+ $ld --verbose
+ ...
+ PROVIDE (__executable_start = SEGMENT_START("text-segment", 0x120000000));
+ . = SEGMENT_START("text-segment", 0x120000000) + SIZEOF_HEADERS;
+
+ ```
+
+ (3) How to fix
+
+ Because 64-bit variable address out of range for IHEX, it's not an
+ functional problem for LoongArch. Refer to the handling of 64-bit
+ targets in this testsuite, use the "is64bitonly" flag to skip those
+ tests for the target has 64-bit addresses.
+
+ Approved-By: Tom Tromey <tom@tromey.com>
+
+2023-04-14 Tom de Vries <tdevries@suse.de>
+
+ [gdb/testsuite] Add regression test for PR30325
+ Add regression tests for PR30325, one for the asm window and one for the
+ source window.
+
+ Use maint set tui-left-margin verbose to make the extend of the left margin
+ clear.
+
+ Tested on x86_64-linux.
+
+ Approved-By: Andrew Burgess <aburgess@redhat.com>
+
+2023-04-14 GDB Administrator <gdbadmin@sourceware.org>
+
+ Automatic date update in version.in
+
+2023-04-13 Tom Tromey <tromey@adacore.com>
+
+ Avoid double-free with debuginfod
+ PR gdb/29257 points out a possible double free when debuginfod is in
+ use. Aside from some ugly warts in the symbol code (an ongoing
+ issue), the underlying issue in this particular case is that elfread.c
+ seems to assume that symfile_bfd_open will return NULL on error,
+ whereas in reality it throws an exception. As this code isn't
+ prepared for an exception, bad things result.
+
+ This patch fixes the problem by introducing a non-throwing variant of
+ symfile_bfd_open and using it in the affected places.
+
+ Bug: https://sourceware.org/bugzilla/show_bug.cgi?id=29257
+
+2023-04-13 Claudiu Zissulescu <claziss@synopsys.com>
+
+ arc: Update ARC specific linker tests.
+ All the tests are designed for a little-endian ARC system. Thus,
+ update the arc predicate in arc.exp, improve the matching pattern for
+ linker relaxation test, and add linker scripts to nps-1x tests.
+
+ arc: Update ARC's CFI tests.
+ The double store/loads instructions (e.g. STD/LDD) are not baseline
+ ARC ISA. The same holds for some short instructions. Update the
+ tests to use base ARC ISA.
+
+2023-04-13 Claudiu Zissulescu <claziss@gmail.com>
+
+ arc: Update GAS test
+
+2023-04-13 Alan Modra <amodra@gmail.com>
+
+ Preserve a few more bfd fields in check_format_matches
+ AOUT and COFF targets set symcount and start_address in their object_p
+ functions. If these are used anywhere then it would pay to save and
+ restore them so that a successful match gets the values expected
+ rather than that for a later unsuccessful target match.
+
+ * format.c (struct bfd_preserve): Move some fields. Add
+ symcount, read_only and start_address.
+ (bfd_preserve_save): Save..
+ (bfd_preserve_restore): ..and restore..
+ (bfd_reinit): ..and zero new fields.
+
+2023-04-13 Alan Modra <amodra@gmail.com>
+
+ Re: pe_ILF_object_p and bfd_check_format_matches
+ The last patch wasn't quite correct. bfd_preserve_restore also needs
+ to handle an in-memory to file backed transition, seen in a testcase
+ ILF object matching both pei-arm-little and pei-arm-wince-little.
+ There the first match is saved in preserve_match, and restored at the
+ end of the bfd_check_format_matches loop making the bfd in-memory. On
+ finding more than one match the function wants to restore the bfd back
+ to its original state with another bfd_preserve_restore call before
+ exiting with a bfd_error_file_ambiguously_recognized error.
+
+ It is also not correct to restore abfd->iostream unless the iovec
+ changes. abfd->iostream is a FILE* when using cache_iovec, and if
+ the file has been closed and reopened the iostream may have changed.
+
+ * format.c (io_reinit): New function.
+ (bfd_reinit, bfd_preserve_restore): Use it.
+
+2023-04-13 GDB Administrator <gdbadmin@sourceware.org>
+
+ Automatic date update in version.in
+
+2023-04-12 Tom de Vries <tdevries@suse.de>
+
+ [gdb/tui] Revert workaround in tui_source_window::show_line_number
+ The m_digits member of tui_source_window is documented as having semantics:
+ ...
+ /* How many digits to use when formatting the line number. This
+ includes the trailing space. */
+ ...
+
+ The commit 1b6d4bb2232 ("Redraw both spaces between line numbers and source
+ code") started printing two trailing spaces instead:
+ ...
+ - xsnprintf (text, sizeof (text), "%*d ", m_digits - 1, lineno);
+ + xsnprintf (text, sizeof (text), "%*d ", m_digits - 1, lineno);
+ ...
+
+ Now that PR30325 is fixed, this no longer has any effect.
+
+ Fix this by reverting to the original behaviour: print one trailing space
+ char.
+
+ Tested on x86_64-linux.
+
+ Approved-By: Tom Tromey <tom@tromey.com>
+
+2023-04-12 Tom de Vries <tdevries@suse.de>
+
+ [gdb/tui] Fix left margin in disassembly window
+ With a hello world a.out, and maint set tui-left-margin-verbose on, we have
+ this disassembly window:
+ ...
+ ┌───────────────────────────────────────────────────────────┐
+ │___ 0x555555555149 <main> endbr64 │
+ │___ 0x55555555514d <main+4> push %rbp │
+ │___ 0x55555555514e <main+5> mov %rsp,%rbp │
+ │B+> 0x555555555151 <main+8> lea 0xeac(%rip),%rax│
+ │___ 0x555555555158 <main+15> mov %rax,%rdi │
+ ...
+ Note the space between "B+>" and 0x555555555151. The space shows that a bit
+ of the left margin is not written, which is a problem because that location is
+ showing a character previously written, which happens to be a space, but also
+ may be something else, for instance a '[' as reported in PR tui/30325.
+
+ The problem is caused by confusion about the meaning of:
+ ...
+ #define TUI_EXECINFO_SIZE 4
+ ...
+
+ There's the meaning of defining the size of this zero-terminated char array:
+ ...
+ char element[TUI_EXECINFO_SIZE];
+ ...
+ which is used to print the "B+>" bit, which is 3 chars wide.
+
+ And there's the meaning of defining part of the size of the left margin:
+ ...
+ int left_margin () const
+ { return 1 + TUI_EXECINFO_SIZE + extra_margin (); }
+ ...
+ where it represents 4 chars.
+
+ The discrepancy between the two causes the space between "B+>" and
+ "0x555555555151".
+
+ Fix this by redefining TUI_EXECINFO_SIZE to 3, and using:
+ ...
+ char element[TUI_EXECINFO_SIZE + 1];
+ ...
+ such that we have:
+ ...
+ |B+>0x555555555151 <main+8> lea 0xeac(%rip),%rax │
+ ...
+
+ This changes the layout of the disassembly window back to what it was before
+ commit 9e820dec13e ("Use a curses pad for source and disassembly windows"),
+ the commit that introduced the PR30325 regression.
+
+ This also changes the source window from:
+ ...
+ │___000005__{ |
+ ...
+ to:
+ ...
+ │___000005_{ |
+ ...
+
+ Tested on x86_64-linux.
+
+ Bug: https://sourceware.org/bugzilla/show_bug.cgi?id=30325
+
+ Approved-By: Tom Tromey <tom@tromey.com>
+
+2023-04-12 Tom de Vries <tdevries@suse.de>
+
+ [gdb/tui] Add maint set/show tui-left-margin-verbose
+ The TUI has two types of windows derived from tui_source_window_base:
+ - tui_source_window (the source window), and
+ - tui_disasm_window (the disassembly window).
+
+ The two windows share a common concept: the left margin.
+
+ With a hello world a.out, we can see the source window:
+ ...
+ ┌─/home/vries/hello.c───────────────────────────────────────┐
+ │ 5 { │
+ │B+> 6 printf ("hello\n"); │
+ │ 7 return 0; │
+ │ 8 } │
+ │ 9 │
+ │
+ ...
+ where the left margin is the part holding "B+>" and the line number, and the
+ disassembly window:
+ ...
+ ┌───────────────────────────────────────────────────────────┐
+ │ 0x555555555149 <main> endbr64 │
+ │ 0x55555555514d <main+4> push %rbp │
+ │ 0x55555555514e <main+5> mov %rsp,%rbp │
+ │B+> 0x555555555151 <main+8> lea 0xeac(%rip),%rax│
+ │ 0x555555555158 <main+15> mov %rax,%rdi │
+ ...
+ where the left margin is just the bit holding "B+>".
+
+ Because the left margin contains some spaces, it's not clear where it starts
+ and ends, making it harder to observe problems related to it.
+
+ Add a new maintenance command "maint set tui-left-margin-verbose", that when
+ set to on replaces the spaces in the left margin with either '_' or '0',
+ giving us this for the source window:
+ ...
+ ┌─/home/vries/hello.c───────────────────────────────────────┐
+ │___000005__{ │
+ │B+>000006__ printf ("hello\n"); │
+ │___000007__ return 0; │
+ │___000008__} │
+ ...
+ and this for the disassembly window:
+ ...
+ ┌───────────────────────────────────────────────────────────┐
+ │___ 0x555555555149 <main> endbr64 │
+ │___ 0x55555555514d <main+4> push %rbp │
+ │___ 0x55555555514e <main+5> mov %rsp,%rbp │
+ │B+> 0x555555555151 <main+8> lea 0xeac(%rip),%rax│
+ │___ 0x555555555158 <main+15> mov %rax,%rdi │
+ ...
+
+ Note the space between "B+>" and 0x555555555151. The space shows that a bit
+ of the left margin is not written, a problem reported as PR tui/30325.
+
+ Specifically, PR tui/30325 is about the fact that the '[' character from the
+ string "[ No Assembly Available ]" ends up in that same spot:
+ ...
+ │B+>[0x555555555151 <main+8> lea 0xeac(%rip),%rax│
+ ...
+ which only happens for certain window widths.
+
+ The new command allows us to spot the problem with any window width.
+
+ Likewise, when we revert the fix from commit 1b6d4bb2232 ("Redraw both spaces
+ between line numbers and source code"), we have:
+ ...
+ ┌─/home/vries/hello.c───────────────────────────────────────┐
+ │___000005_ { │
+ │B+>000006_ printf ("hello\n"); │
+ │___000007_ return 0; │
+ │___000008_ } │
+ ...
+ showing a similar problem at the space between '_' and '{'.
+
+ Tested on x86_64-linux.
+
+ Reviewed-By: Eli Zaretskii <eliz@gnu.org>
+ Approved-By: Tom Tromey <tom@tromey.com>
+
+2023-04-12 Tom Tromey <tom@tromey.com>
+
+ Use SELF_CHECK in all unit tests
+ I noticed a few unit tests are using gdb_assert. I think this was an
+ older style, before SELF_CHECK was added. This patch switches them
+ over.
+
+ Approved-By: Simon Marchi <simon.marchi@efficios.com>
+
+2023-04-12 Claudiu Zissulescu <claziss@gmail.com>
+
+ arc: remove faulty instructions
+ Clean not implemented ARC instruction from ARC instruction table.
+
+2023-04-12 Tom Tromey <tromey@adacore.com>
+
+ Use 'require' with gnatmake_version_at_least
+ I found a couple of tests that check gnatmake_version_at_least using
+ "if" where "require" would be a little cleaner. This patch converts
+ these.
+
+2023-04-12 YunQiang Su <yunqiang.su@cipunited.com>
+
+ MIPS: make mipsisa32 and mipsisa64 link more systematic
+ Introduce `static const struct mips_mach_extension mips_mach_32_64[]`
+ and `mips_mach_extends_32_64 (unsigned long base, unsigned long extension)`,
+ to make mipsisa32 and mipsisa64 interlink more systemtic.
+
+ Normally, the ISA mipsisa64rN has two subset: mipsisa64r(N-1) and
+ mipsisa32rN. `mips_mach_extensions` can hold only mipsisa64r(N-1),
+ so we need to introduce a new instruction `mips_mach_32_64`, which holds the pair 32vs64.
+
+ Note: R6 is not compatible with pre-R6.
+
+ bfd/ChangeLog:
+
+ * elfxx-mips.c (mips_mach_extends_p): make mipsisa32 and
+ mipsisa64 interlink more systematic.
+ (mips_mach_32_64): new struct added.
+ (mips_mach_extends_32_64): new function added.
+
+2023-04-12 Nick Clifton <nickc@redhat.com>
+
+ Fix typos in the linker's documentation of the --enable-non-contiguous-regions option.
+
+2023-04-12 Alan Modra <amodra@gmail.com>
+
+ PR30326, uninitialised value in objdump compare_relocs
+ This is a fuzzing PR, with a testcase involving a SHF_ALLOC and
+ SHF_COMPRESSED SHT_RELA section, ie. a compressed dynamic reloc
+ section. BFD doesn't handle compressed relocation sections, with most
+ of the code reading relocs using sh_size (often no bfd section is
+ created) but in the case of SHF_ALLOC dynamic relocs we had some code
+ using the bfd section size. This led to a mismatch, sh_size is
+ compressed, size is uncompressed, and from that some uninitialised
+ memory. Consistently using sh_size is enough to fix this PR, but I've
+ also added tests to exclude SHF_COMPRESSED reloc sections from
+ consideration.
+
+ PR 30362
+ * elf.c (bfd_section_from_shdr): Exclude reloc sections with
+ SHF_COMPRESSED flag from normal reloc processing.
+ (_bfd_elf_get_dynamic_reloc_upper_bound): Similarly exclude
+ SHF_COMPRESSED sections from consideration. Use sh_size when
+ sizing to match slurp_relocs.
+ (_bfd_elf_canonicalize_dynamic_reloc): Likewise.
+ (_bfd_elf_get_synthetic_symtab): Use NUM_SHDR_ENTRIES to size
+ plt relocs.
+ * elf32-arm.c (elf32_arm_get_synthetic_symtab): Likewise.
+ * elf32-ppc.c (ppc_elf_get_synthetic_symtab): Likewise.
+ * elf64-ppc.c (ppc64_elf_get_synthetic_symtab): Likewise.
+ * elfxx-mips.c (_bfd_mips_elf_get_synthetic_symtab): Likewise.
+
+2023-04-12 Alan Modra <amodra@gmail.com>
+
+ ubsan: dwarf2.c:2232:7: runtime error: index 16 out of bounds
+ Except it isn't out of bounds because space for a larger array has
+ been allocated.
+
+ * dwarf2.c (struct trie_leaf): Make ranges a C99 flexible array.
+ (alloc_trie_leaf, insert_arange_in_trie): Adjust sizing.
+
+2023-04-12 Alan Modra <amodra@gmail.com>
+
+ Fail of x86_64 AMX-COMPLEX insns (Intel disassembly)
+ x86_64-w64-mingw32 pads sections.
+
+ * testsuite/gas/i386/x86-64-amx-complex-intel.d: Don't fail
+ due to nop padding.
+
+2023-04-12 Alan Modra <amodra@gmail.com>
+
+ pe_ILF_object_p and bfd_check_format_matches
+ If pe_ILF_object_p succeeds, pe_ILF_build_a_bfd will have changed the
+ bfd from being file backed to in-memory. This can have unfortunate
+ results for targets checked by bfd_check_format_matches after that
+ point as they will be matching against the created in-memory image
+ rather than the file. bfd_preserve_restore also has a problem if it
+ flips the BFD_IN_MEMORY flag, because the flag affects iostream
+ meaning and should be set if using _bfd_memory_iovec. To fix these
+ problems, save and restore iostream and iovec along with flags, and
+ modify bfd_reinit to make the bfd file backed again. Restoring the
+ iovec and iostream allows the hack in bfd_reinit keeping BFD_IN_MEMORY
+ (part of BFD_FLAGS_SAVED) to be removed.
+ One more detail: If restoring from file backed to in-memory then the
+ bfd needs to be forcibly removed from the cache lru list, since after
+ the bfd becomes in-memory a bfd_close will delete the bfd's memory
+ leaving the lru list pointing into freed memory.
+
+ * cache.c (bfd_cache_init): Clear BFD_CLOSED_BY_CACHE here..
+ (bfd_cache_lookup_worker): ..rather than here.
+ (bfd_cache_close): Comment.
+ * format.c (struct bfd_preserve): Add iovec and iostream fields.
+ (bfd_preserve_save): Save them..
+ (bfd_preserve_restore): ..and restore them, calling
+ bfd_cache_close if the iovec differs.
+ (bfd_reinit): Add preserve param. If the bfd has been flipped
+ to in-memory, reopen the file. Restore flags.
+ * peicode.h (pe_ILF_cleanup): New function.
+ (pe_ILF_object_p): Return it.
+ * bfd.c (BFD_FLAGS_SAVED): Delete.
+ * bfd-in2.h: Regenerate.
+
+2023-04-12 Alan Modra <amodra@gmail.com>
+
+ Comment typo fix
+
+2023-04-12 GDB Administrator <gdbadmin@sourceware.org>
+
+ Automatic date update in version.in
+
+2023-04-11 Nathan Sidwell <nathan@acm.org>
+
+ bfd: optimize bfd_elf_hash
+ The bfd_elf_hash loop is taken straight from the sysV document, but it
+ is poorly optimized. This refactoring removes about 5 x86 insns from
+ the 15 insn loop.
+
+ 1) The if (..) is meaningless -- we're xoring with that value, and of
+ course xor 0 is a nop. On x86 (at least) we actually compute the xor'd
+ value and then cmov. Removing the if test removes the cmov.
+
+ 2) The 'h ^ g' to clear the top 4 bits is not needed, as those 4 bits
+ will be shifted out in the next iteration. All we need to do is sink
+ a mask of those 4 bits out of the loop.
+
+ 3) anding with 0xf0 after shifting by 24 bits can allow betterin
+ encoding on RISC ISAs than masking with '0xf0 << 24' before shifting.
+ RISC ISAs often require materializing larger constants.
+
+ bfd/
+ * elf.c (bfd_elf_hash): Refactor to optimize loop.
+ (bfd_elf_gnu_hash): Refactor to use 32-bit type.
+
+2023-04-11 Nils-Christian Kempke <nils-christian.kempke@intel.com>
+
+ gdb, doc: correct argument description for info connections/inferiors
+ It said for 'info inferiors' and 'info connections' that the argument
+ could be 'a space separated list of inferior numbers' which is correct
+ but incomplete. In fact the arguments can be any space separated
+ combination of numbers and (ascending) ranges.
+
+ The beginning of the section now describes the ID list as a new keyword.
+
+ Co-Authored-By: Christina Schimpe <christina.schimpe@intel.com>
+
+2023-04-11 Nick Clifton <nickc@redhat.com>
+
+ Replace an assertion in the dwarf code with a warning message.
+ PR 30327
+ * dwarf.c (read_and_display_attr_value): Warn if the number of views is greater than the number of locations.
+
+ Fix an illegal memorty access when running gprof over corrupt data.
+ PR 30324
+ * symtab.c (symtab_finalize): Only change the end address if dst has been updated.
+
+ Fix an attempt to allocate an excessive amount of memory when parsing a corrupt DWARF file.
+ PR 30313
+ * dwarf.c (display_debug_lines_decoded): Check for an overlarge number of files or directories.
+
+ Fix a potential illegal memory access when displaying corrupt DWARF information.
+ PR 30312
+ * dwarf.c (prealloc_cu_tu_list): Always allocate at least one entry.
+
+ Fix an attempt to allocate an overlarge amount of memory when decoding a corrupt ELF format file.
+ PR 30311
+ * readelf.c (uncompress_section_contents): Check for a suspiciously large uncompressed size.
+
+ Fix illegal memory access when disassembling corrupt NFP binaries.
+ PR 30310
+ * nfp-dis.c (init_nfp6000_priv): Check that the output section exists.
+
+2023-04-11 Andrew Burgess <aburgess@redhat.com>
+
+ gdb: fix indentation within print_one_breakpoint_location
+ Spotted some code in print_one_breakpoint_location that was not
+ indented correctly, this commit just changes the indentation.
+
+ There should be no user visible changes after this commit.
+
+2023-04-11 Andrew Burgess <aburgess@redhat.com>
+
+ gdb/testsuite: fix typo gdb_name_name -> gdb_test_name
+ Spotted a small typo in gdb_breakpoint proc, we use $gdb_name_name
+ instead of $gdb_test_name in one place. Fixed in this commit.
+
+2023-04-11 Andrew Burgess <aburgess@redhat.com>
+
+ gdb: warn when converting h/w watchpoints to s/w
+ On amd64 (at least) if a user sets a watchpoint before the inferior
+ has started then GDB will assume that a hardware watchpoint can be
+ created.
+
+ When the inferior starts there is a chance that the watchpoint can't
+ actually be create as a hardware watchpoint, in which case (currently)
+ GDB will silently convert the watchpoint to a software watchpoint.
+ Here's an example session:
+
+ (gdb) p sizeof var
+ $1 = 4000
+ (gdb) watch var
+ Hardware watchpoint 1: var
+ (gdb) info watchpoints
+ Num Type Disp Enb Address What
+ 1 hw watchpoint keep y var
+ (gdb) starti
+ Starting program: /home/andrew/tmp/watch
+
+ Program stopped.
+ 0x00007ffff7fd3110 in _start () from /lib64/ld-linux-x86-64.so.2
+ (gdb) info watchpoints
+ Num Type Disp Enb Address What
+ 1 watchpoint keep y var
+ (gdb)
+
+ Notice that before the `starti` command the watchpoint is showing as a
+ hardware watchpoint, but afterwards it is showing as a software
+ watchpoint. Additionally, note that we clearly told the user we
+ created a hardware watchpoint:
+
+ (gdb) watch var
+ Hardware watchpoint 1: var
+
+ I think this is bad. I used `starti`, but if the user did `start` or
+ even `run` then the inferior is going to be _very_ slow, which will be
+ unexpected -- after all, we clearly told the user that we created a
+ hardware watchpoint, and the manual clearly says that hardware
+ watchpoints are fast (at least compared to s/w watchpoints).
+
+ In this patch I propose adding a new warning which will be emitted
+ when GDB downgrades a h/w watchpoint to s/w. The session now looks
+ like this:
+
+ (gdb) p sizeof var
+ $1 = 4000
+ (gdb) watch var
+ Hardware watchpoint 1: var
+ (gdb) info watchpoints
+ Num Type Disp Enb Address What
+ 1 hw watchpoint keep y var
+ (gdb) starti
+ Starting program: /home/andrew/tmp/watch
+ warning: watchpoint 1 downgraded to software watchpoint
+
+ Program stopped.
+ 0x00007ffff7fd3110 in _start () from /lib64/ld-linux-x86-64.so.2
+ (gdb) info watchpoints
+ Num Type Disp Enb Address What
+ 1 watchpoint keep y var
+ (gdb)
+
+ The important line is:
+
+ warning: watchpoint 1 downgraded to software watchpoint
+
+ It's not much, but hopefully it will be enough to indicate to the user
+ that something unexpected has occurred, and hopefully, they will not
+ be surprised when the inferior runs much slower than they expected.
+
+ I've added an amd64 only test in gdb.arch/, I didn't want to try
+ adding this as a global test as other architectures might be able to
+ support the watchpoint request in h/w.
+
+ Also the test is skipped for extended-remote boards as there's a
+ different set of options for limiting hardware watchpoints on remote
+ targets, and this test isn't about them.
+
+ Reviewed-By: Lancelot Six <lancelot.six@amd.com>
+
+2023-04-11 Andrew Burgess <aburgess@redhat.com>
+
+ gdb/riscv: Support c.li in prologue unwinder
+ I was seeing some failures in gdb.threads/omp-par-scope.exp when run
+ on a riscv64 target. It turns out the cause of the problem is that I
+ didn't have debug information installed for libgomp.so, which this
+ test makes use of. The test requires GDB to backtrace through a
+ libgomp function, and the riscv prologue unwinder was failing to
+ unwind this particular stack frame.
+
+ The reason for the failure to unwind was that the function prologue
+ includes a c.li (compressed load immediate) instruction, and the riscv
+ prologue scanning unwinder doesn't know what to do with this
+ instruction, though the unwinder does understand c.lui (compressed
+ load unsigned immediate).
+
+ This commit adds support for c.li. After this GDB is able to unwind
+ through libgomp, and I no longer see any unexpected failures in
+ gdb.threads/omp-par-scope.exp.
+
+ I've also included a new test in gdb.arch/ which specifically checks
+ for our c.li support.
+
+2023-04-11 GDB Administrator <gdbadmin@sourceware.org>
+
+ Automatic date update in version.in
+
+2023-04-10 Thiago Jung Bauermann <thiago.bauermann@linaro.org>
+
+ gdb/dwarf: Fix MinGW build
+ Unfortunately MinGW doesn't support std::future yet, so this causes the
+ build to fail. Use GDB's version which provides a fallback for this case.
+
+ Tested for regressions on native aarch64-linux.
+
+ Approved-By: Tom Tromey <tromey@adacore.com>
+
+2023-04-10 Tom Tromey <tromey@adacore.com>
+
+ Handle unwinding from SEGV on Windows
+ PR win32/30255 points out that a call to a NULL function pointer will
+ leave gdb unable to "bt" on Windows.
+
+ I tracked this down to the amd64 windows unwinder. If we treat this
+ scenario as if it were a leaf function, unwinding works fine.
+
+ I'm not completely sure this patch is the best way. I considered
+ having it check for 'pc==0' -- but then I figured this could affect
+ any inaccessible PC, not just the special 0 value.
+
+ No test case because I can't run dejagnu tests on Windows. I tested
+ this by hand using the test case in the bug.
+
+ Bug: https://sourceware.org/bugzilla/show_bug.cgi?id=30255
+
+2023-04-10 Haochen Jiang <haochen.jiang@intel.com>
+
+ x86: Add inval tests for AMX instructions
+ gas/ChangeLog:
+
+ * testsuite/gas/i386/i386.exp: Run AMX-FP16 and AMX-COMPLEX
+ inval testcases.
+ * testsuite/gas/i386/x86-64-amx-inval.l: Add AMX-BF16 tests.
+ * testsuite/gas/i386/x86-64-amx-inval.s: Ditto.
+ * testsuite/gas/i386/x86-64-amx-complex-inval.l: New test.
+ * testsuite/gas/i386/x86-64-amx-complex-inval.s: Ditto.
+ * testsuite/gas/i386/x86-64-amx-fp16-inval.l: Ditto.
+ * testsuite/gas/i386/x86-64-amx-fp16-inval.s: Ditto.
+
+2023-04-10 GDB Administrator <gdbadmin@sourceware.org>
+
+ Automatic date update in version.in
+
+2023-04-09 GDB Administrator <gdbadmin@sourceware.org>
+
+ Automatic date update in version.in
+
+2023-04-08 Philippe Blain <levraiphilippeblain@gmail.com>
+
+ Fix typos in previous commit of gdb.texinfo.
+ * gdb/doc/gdb.texinfo (Requirements): Fix typos.
+
+2023-04-08 Nick Alcock <nick.alcock@oracle.com>
+
+ libctf, link: fix CU-mapped links with CTF_LINK_EMPTY_CU_MAPPINGS
+ This is a bug in the intersection of two obscure options that cannot
+ even be invoked from ld with a feature added to stop ld of the
+ same input file repeatedly from crashing the linker.
+
+ The latter fix involved tracking input files (internally to libctf) not
+ just with their input CU name but with a version of their input CU name
+ that was augmented with a numeric prefix if their linker input file name
+ was changed, to prevent distinct CTF dicts with the same cuname from
+ overwriting each other. (We can't use just the linker input file name
+ because one linker input can contain many CU dicts, particularly under
+ ld -r). If these inputs then produced conflicting types, those types
+ were emitted into similarly-named output dicts, so we needed similar
+ machinery to detect clashing output dicts and add a numeric prefix to
+ them as well.
+
+ This works fine, except that if you used the cu-mapping feature to force
+ double-linking of CTF (so that your CTF can be grouped into output dicts
+ larger than a single translation unit) and then also used
+ CTF_LINK_EMPTY_CU_MAPPINGS to force every possible output dict in the
+ mapping to be created (even if empty), we did the creation of empty dicts
+ first, and then all the actual content got considered to be a clash. So
+ you ended up with a pile of useless empty dicts and then all the content
+ was in full dicts with the same names suffixed with a #0. This seems
+ likely to confuse consumers that use this facility.
+
+ Fixed by generating all the EMPTY_CU_MAPPINGS empty dicts after linking
+ is complete, not before it runs.
+
+ No impact on ld, which does not do cu-mapped links or pass
+ CTF_LINK_EMPTY_CU_MAPPINGS to ctf_link().
+
+ libctf/
+ * ctf-link.c (ctf_create_per_cu): Don't create new dicts iff one
+ already exists and we are making one for no input in particular.
+ (ctf_link): Emit empty CTF dicts corresponding to no input in
+ particular only after linkiing is complete.
+
+2023-04-08 Nick Alcock <nick.alcock@oracle.com>
+
+ libctf: propagate errors from parents correctly
+ CTF dicts have per-dict errno values: as with other errno values these
+ are set on error and left unchanged on success. This means that all
+ errors *must* set the CTF errno: if a call leaves it unchanged, the
+ caller is apt to find a previous, lingering error and misinterpret
+ it as the real error.
+
+ There are many places in libctf where we carry out operations on parent
+ dicts as a result of carrying out other user-requested operations on
+ child dicts (e.g. looking up information on a pointer to a type will
+ look up the type as well: the pointer might well be in a child and the
+ type it's a pointer to in the parent). Those operations on the parent
+ might fail; if they do, the error must be correctly reflected on the
+ child that the user-visible operation was carried out on. In many
+ places this was not happening.
+
+ So, audit and fix all those places. Add tests for as many of those
+ cases as possible so they don't regress.
+
+ libctf/
+ * ctf-create.c (ctf_add_slice): Use the original dict.
+ * ctf-lookup.c (ctf_lookup_variable): Propagate errors.
+ (ctf_lookup_symbol_idx): Likewise.
+ * ctf-types.c (ctf_member_next): Likewise.
+ (ctf_type_resolve_unsliced): Likewise.
+ (ctf_type_aname): Likewise.
+ (ctf_member_info): Likewise.
+ (ctf_type_rvisit): Likewise.
+ (ctf_func_type_info): Set the error on the right dict.
+ (ctf_type_encoding): Use the original dict.
+ * testsuite/libctf-writable/error-propagation.*: New test.
+
+2023-04-08 Nick Alcock <nick.alcock@oracle.com>
+
+ libctf, tests: do not assume host and target have identical field offsets
+ The newly-introduced libctf-lookup unnamed-field-info test checks
+ C compiler-observed field offsets against libctf-computed ones
+ by #including the testcase in the lookup runner as well as
+ generating CTF for it. This only works if the host, on which
+ the lookup runner is compiled and executed, is the same architecture as
+ the target, for which the CTF is generated: when crossing, the trick
+ may fail.
+
+ So pass down an indication of whether this is a cross into the
+ testsuite, and add a new no_cross flag to .lk files that is used to
+ suppress test execution when a cross-compiler is being tested.
+
+ libctf/
+ * Makefile.am (check_DEJAGNU): Pass down TEST_CROSS.
+ * Makefile.in: Regenerated.
+ * testsuite/lib/ctf-lib.exp (run_lookup_test): Use it to
+ implement the new no_cross option.
+ * testsuite/libctf-lookup/unnamed-field-info.lk: Mark as
+ no_cross.
+
+2023-04-08 GDB Administrator <gdbadmin@sourceware.org>
+
+ Automatic date update in version.in
+
+2023-04-07 Tom Tromey <tromey@adacore.com>
+
+ Rewrite Ada symbol cache
+ In an experiment I'm trying, I needed Ada symbol cache entries to be
+ allocated with 'new'. This patch reimplements the symbol cache to use
+ the libiberty hash table and to use new and delete. A couple of other
+ minor cleanups are done.
+
+ Add Ada test case for break using a label
+ I noticed there aren't any Ada test cases for setting a breakpoint
+ using a label. This patch adds one, adapted from the AdaCore test
+ suite.
+
+ Use ui_out for "maint info frame-unwinders"
+ This changes "maint info frame-unwinders" to use ui-out. This makes
+ the table slightly nicer. In general I think it's better to use
+ ui-out for tables.
+
+2023-04-07 Tom de Vries <tdevries@suse.de>
+
+ [gdb/testsuite] Add -q to INTERNAL_GDBFLAGS
+ Whenever we start gdb in the testsuite, we have the rather verbose:
+ ...
+ $ gdb
+ GNU gdb (GDB) 14.0.50.20230405-git
+ Copyright (C) 2023 Free Software Foundation, Inc.
+ License GPLv3+: GNU GPL version 3 or later <http://gnu.org/licenses/gpl.html>
+ This is free software: you are free to change and redistribute it.
+ There is NO WARRANTY, to the extent permitted by law.
+ Type "show copying" and "show warranty" for details.
+ This GDB was configured as "x86_64-pc-linux-gnu".
+ Type "show configuration" for configuration details.
+ For bug reporting instructions, please see:
+ <https://www.gnu.org/software/gdb/bugs/>.
+ Find the GDB manual and other documentation resources online at:
+ <http://www.gnu.org/software/gdb/documentation/>.
+
+ For help, type "help".
+ Type "apropos word" to search for commands related to "word".
+ (gdb)
+ ...
+
+ This makes gdb.log longer than necessary and harder to read.
+
+ We do need to test that the output is produced, but that should be limited to
+ one or a few test-cases.
+
+ Fix this by adding -q to INTERNAL_GDBFLAGS, such that we simply have:
+ ...
+ $ gdb -q
+ (gdb)
+ ...
+
+ Tested on x86_64-linux.
+
+2023-04-07 Tom de Vries <tdevries@suse.de>
+
+ [gdb/testsuite] Add missing .note.GNU-stack in gdb.arch/amd64-disp-step-self-call.exp
+ For test-case gdb.arch/amd64-disp-step-self-call.exp I get:
+ ...
+ gdb compile failed, ld: warning: amd64-disp-step-self-call0.o: \
+ missing .note.GNU-stack section implies executable stack
+ ld: NOTE: This behaviour is deprecated and will be removed in a future \
+ version of the linker
+ ...
+
+ Fix this by adding the missing .note.GNU-stack.
+
+ Likewise for gdb.arch/i386-disp-step-self-call.exp.
+
+ Tested on x86_64-linux.
+
+2023-04-07 Haochen Jiang <haochen.jiang@intel.com>
+
+ Support Intel AMX-COMPLEX
+ gas/ChangeLog:
+
+ * NEWS: Support Intel AMX-COMPLEX.
+ * config/tc-i386.c: Add amx_complex.
+ * doc/c-i386.texi: Document .amx_complex.
+ * testsuite/gas/i386/i386.exp: Run AMX-COMPLEX tests.
+ * testsuite/gas/i386/amx-complex-inval.l: New test.
+ * testsuite/gas/i386/amx-complex-inval.s: Ditto.
+ * testsuite/gas/i386/x86-64-amx-complex-bad.d: Ditto.
+ * testsuite/gas/i386/x86-64-amx-complex-bad.s: Ditto.
+ * testsuite/gas/i386/x86-64-amx-complex-intel.d: Ditto.
+ * testsuite/gas/i386/x86-64-amx-complex.d: Ditto.
+ * testsuite/gas/i386/x86-64-amx-complex.s: Ditto.
+
+ opcodes/ChangeLog:
+
+ * i386-dis.c (MOD_VEX_0F386C_X86_64_W_0): New.
+ (PREFIX_VEX_0F386C_X86_64_W_0_M_1_L_0): Ditto.
+ (X86_64_VEX_0F386C): Ditto.
+ (VEX_LEN_0F386C_X86_64_W_0_M_1): Ditto.
+ (VEX_W_0F386C_X86_64): Ditto.
+ (mod_table): Add MOD_VEX_0F386C_X86_64_W_0.
+ (prefix_table): Add PREFIX_VEX_0F386C_X86_64_W_0_M_1_L_0.
+ (x86_64_table): Add X86_64_VEX_0F386C.
+ (vex_len_table): Add VEX_LEN_0F386C_X86_64_W_0_M_1.
+ (vex_w_table): Add VEX_W_0F386C_X86_64.
+ * i386-gen.c (cpu_flag_init): Add CPU_AMX_COMPLEX_FLAGS and
+ CPU_ANY_AMX_COMPLEX_FLAGS.
+ * i386-init.h: Regenerated.
+ * i386-mnem.h: Ditto.
+ * i386-opc.h (CpuAMX_COMPLEX): New.
+ (i386_cpu_flags): Add cpuamx_complex.
+ * i386-opc.tbl: Add AMX-COMPLEX instructions.
+ * i386-tbl.h: Regenerated.
+
+2023-04-07 Andrew Burgess <aburgess@redhat.com>
+
+ gdb/testsuite: updates for gdb.arch/{amd64,i386}-disp-step-self-call.exp
+ This commit:
+
+ commit cf141dd8ccd36efe833aae3ccdb060b517cc1112
+ Date: Wed Feb 22 12:15:34 2023 +0000
+
+ gdb: fix reg corruption from displaced stepping on amd64
+
+ Added two test scripts gdb.arch/amd64-disp-step-self-call.exp and
+ gdb.arch/i386-disp-step-self-call.exp. These scripts contained a test
+ that included a stack address in the test name, this makes it harder
+ to compare results between runs.
+
+ This commit gives the tests proper names that doesn't include an
+ address.
+
+ Also in gdb.arch/i386-disp-step-self-call.exp I noticed that we were
+ writing 8-bytes rather than 4 in order to clear the return address
+ entry on the stack. This is also fixed in this commit.
+
+2023-04-07 GDB Administrator <gdbadmin@sourceware.org>
+
+ Automatic date update in version.in
+
+2023-04-06 Tom Tromey <tromey@adacore.com>
+
+ Use unique_xmalloc_ptr in apply_ext_lang_type_printers
+ This changes apply_ext_lang_type_printers to use unique_xmalloc_ptr,
+ removing some manual memory management. Regression tested on x86-64
+ Fedora 36.
+
+ Approved-By: Simon Marchi <simon.marchi@efficios.com>
+
+2023-04-06 Pedro Alves <pedro@palves.net>
+
+ Fix gdb.base/align-*.exp and Clang + LTO and AIX GCC
+ Clang with LTO (clang -flto) garbage collects unused global variables,
+ Thus, gdb.base/align-c.exp and gdb.base/align-c++.exp fail with
+ hundreds of FAILs like so:
+
+ $ make check \
+ TESTS="gdb.*/align-*.exp" \
+ RUNTESTFLAGS="CC_FOR_TARGET='clang -flto' CXX_FOR_TARGET='clang++ -flto'"
+ ...
+ FAIL: gdb.base/align-c.exp: get integer valueof "a_char"
+ FAIL: gdb.base/align-c.exp: print _Alignof(char)
+ FAIL: gdb.base/align-c.exp: get integer valueof "a_char_x_char"
+ FAIL: gdb.base/align-c.exp: print _Alignof(struct align_pair_char_x_char)
+ FAIL: gdb.base/align-c.exp: get integer valueof "a_char_x_unsigned_char"
+ ...
+
+ AIX GCC has the same issue, and there the easier way of adding
+ __attribute__((used)) to globals does not help.
+
+ So add explicit uses of all globals to the generated code.
+
+ For the C++ test, that reveals that the static variable members of the
+ generated structs are not defined anywhere, leading to undefined
+ references. Fixed by emitting initialization for all static members.
+
+ Lastly, I noticed that CXX_FOR_TARGET was being ignored -- that's
+ because the align-c++.exp testcase is compiling with the C compiler
+ driver. Fixed by passing "c++" as option to prepare_for_testing.
+
+ Change-Id: I874b717afde7b6fb1e45e526912b518a20a12716
+
+2023-04-06 Andrew Burgess <aburgess@redhat.com>
+
+ gdb: run black code formatter on gdbarch_components.py
+ The following commit changed gdbarch_components.py but failed to
+ format it with black:
+
+ commit cf141dd8ccd36efe833aae3ccdb060b517cc1112
+ Date: Wed Feb 22 12:15:34 2023 +0000
+
+ gdb: fix reg corruption from displaced stepping on amd64
+
+ This commit just runs black on the file and commits the result.
+
+ The change is just the addition of an extra "," -- there will be no
+ change to the generated source files after this commit.
+
+ There will be no user visible changes after this commit.
+
+2023-04-06 Andrew Burgess <aburgess@redhat.com>
+
+ gdb/python: allow Frame.read_var to accept named arguments
+ This commit allows Frame.read_var to accept named arguments, and also
+ improves (I think) some of the error messages emitted when values of
+ the wrong type are passed to this function.
+
+ The read_var method takes two arguments, one a variable, which is
+ either a gdb.Symbol or a string, while the second, optional, argument
+ is always a gdb.Block.
+
+ I'm now using 'O!' as the format specifier for the second argument,
+ which allows the argument type to be checked early on. Currently, if
+ the second argument is of the wrong type then we get this error:
+
+ (gdb) python print(gdb.selected_frame().read_var("a1", "xxx"))
+ Traceback (most recent call last):
+ File "<string>", line 1, in <module>
+ RuntimeError: Second argument must be block.
+ Error while executing Python code.
+ (gdb)
+
+ After this commit, we now get an error like this:
+
+ (gdb) python print(gdb.selected_frame().read_var("a1", "xxx"))
+ Traceback (most recent call last):
+ File "<string>", line 1, in <module>
+ TypeError: argument 2 must be gdb.Block, not str
+ Error while executing Python code.
+ (gdb)
+
+ Changes are:
+
+ 1. Exception type is TypeError not RuntimeError, this is unfortunate
+ as user code _could_ be relying on this, but I think the improvement
+ is worth the risk, user code relying on the exact exception type is
+ likely to be pretty rare,
+
+ 2. New error message gives argument position and expected argument
+ type, as well as the type that was passed.
+
+ If the first argument, the variable, has the wrong type then the
+ previous exception was already a TypeError, however, I've updated the
+ text of the exception to more closely match the "standard" error
+ message we see above. If the first argument has the wrong type then
+ before this commit we saw this:
+
+ (gdb) python print(gdb.selected_frame().read_var(123))
+ Traceback (most recent call last):
+ File "<string>", line 1, in <module>
+ TypeError: Argument must be a symbol or string.
+ Error while executing Python code.
+ (gdb)
+
+ And after we see this:
+
+ (gdb) python print(gdb.selected_frame().read_var(123))
+ Traceback (most recent call last):
+ File "<string>", line 1, in <module>
+ TypeError: argument 1 must be gdb.Symbol or str, not int
+ Error while executing Python code.
+ (gdb)
+
+ For existing code that doesn't use named arguments and doesn't rely on
+ exceptions, there will be no changes after this commit.
+
+ Reviewed-By: Tom Tromey <tom@tromey.com>
+
+2023-04-06 Andrew Burgess <aburgess@redhat.com>
+
+ gdb/python: convert Frame.read_register to take named arguments
+ Following on from the previous commit, this updates
+ Frame.read_register to accept named arguments. As with the previous
+ commit there's no huge benefit for the users in accepting named
+ arguments here -- this function only takes a single argument after
+ all.
+
+ But I do think it is worth keeping Frame.read_register method in sync
+ with the PendingFrame.read_register method, this allows for the
+ possibility that the user has some code that can operate on either a
+ Frame or a Pending frame.
+
+ Minor update to allow for named arguments, and an extra test to check
+ the new functionality.
+
+ Reviewed-By: Tom Tromey <tom@tromey.com>
+
+2023-04-06 Andrew Burgess <aburgess@redhat.com>
+
+ gdb/python: have PendingFrame methods accept keyword arguments
+ Update the two gdb.PendingFrame methods gdb.PendingFrame.read_register
+ and gdb.PendingFrame.create_unwind_info to accept keyword arguments.
+
+ There's no huge benefit for making this change, both of these methods
+ only take a single argument, so it is (maybe) less likely that a user
+ will take advantage of the keyword arguments in these cases, but I
+ think it's nice to be consistent, and I don't see any particular draw
+ backs to making this change.
+
+ For PendingFrame.read_register I've changed the argument name from
+ 'reg' to 'register' in the documentation and used 'register' as the
+ argument name in GDB. My preference for APIs is to use full words
+ where possible, and given we didn't support named arguments before
+ this change should not break any existing code.
+
+ There should be no user visible changes (for existing code) after this
+ commit.
+
+ Reviewed-By: Eli Zaretskii <eliz@gnu.org>
+ Reviewed-By: Tom Tromey <tom@tromey.com>
+
+2023-04-06 Andrew Burgess <aburgess@redhat.com>
+
+ gdb/python: have UnwindInfo.add_saved_register accept named args
+ Update gdb.UnwindInfo.add_saved_register to accept named keyword
+ arguments.
+
+ As part of this update we now use gdb_PyArg_ParseTupleAndKeywords
+ instead of PyArg_UnpackTuple to parse the function arguments.
+
+ By switching to gdb_PyArg_ParseTupleAndKeywords, we can now use 'O!'
+ as the argument format for the function's value argument. This means
+ that we can check the argument type (is gdb.Value) as part of the
+ argument processing rather than manually performing the check later in
+ the function. One result of this is that we now get a better error
+ message (at least, I think so). Previously we would get something
+ like:
+
+ ValueError: Bad register value
+
+ Now we get:
+
+ TypeError: argument 2 must be gdb.Value, not XXXX
+
+ It's unfortunate that the exception type changed, but I think the new
+ exception type actually makes more sense.
+
+ My preference for argument names is to use full words where that's not
+ too excessive. As such, I've updated the name of the argument from
+ 'reg' to 'register' in the documentation, which is the argument name
+ I've made GDB look for here.
+
+ For existing unwinder code that doesn't throw any exceptions nothing
+ should change with this commit. It is possible that a user has some
+ code that throws and catches the ValueError, and this code will break
+ after this commit, but I think this is going to be sufficiently rare
+ that we can take the risk here.
+
+ Reviewed-By: Eli Zaretskii <eliz@gnu.org>
+ Reviewed-By: Tom Tromey <tom@tromey.com>
+
+2023-04-06 Andrew Burgess <aburgess@redhat.com>
+
+ gdb: fix reg corruption from displaced stepping on amd64
+ This commit aims to address a problem that exists with the current
+ approach to displaced stepping, and was identified in PR gdb/22921.
+
+ Displaced stepping is currently supported on AArch64, ARM, amd64,
+ i386, rs6000 (ppc), and s390. Of these, I believe there is a problem
+ with the current approach which will impact amd64 and ARM, and can
+ lead to random register corruption when the inferior makes use of
+ asynchronous signals and GDB is using displaced stepping.
+
+ The problem can be found in displaced_step_buffers::finish in
+ displaced-stepping.c, and is this; after GDB tries to perform a
+ displaced step, and the inferior stops, GDB classifies the stop into
+ one of two states, either the displaced step succeeded, or the
+ displaced step failed.
+
+ If the displaced step succeeded then gdbarch_displaced_step_fixup is
+ called, which has the job of fixing up the state of the current
+ inferior as if the step had not been performed in a displaced manner.
+ This all seems just fine.
+
+ However, if the displaced step is considered to have not completed
+ then GDB doesn't call gdbarch_displaced_step_fixup, instead GDB
+ remains in displaced_step_buffers::finish and just performs a minimal
+ fixup which involves adjusting the program counter back to its
+ original value.
+
+ The problem here is that for amd64 and ARM setting up for a displaced
+ step can involve changing the values in some temporary registers. If
+ the displaced step succeeds then this is fine; after the step the
+ temporary registers are restored to their original values in the
+ architecture specific code.
+
+ But if the displaced step does not succeed then the temporary
+ registers are never restored, and they retain their modified values.
+
+ In this context a temporary register is simply any register that is
+ not otherwise used by the instruction being stepped that the
+ architecture specific code considers safe to borrow for the lifetime
+ of the instruction being stepped.
+
+ In the bug PR gdb/22921, the amd64 instruction being stepped is
+ an rip-relative instruction like this:
+
+ jmp *0x2fe2(%rip)
+
+ When we displaced step this instruction we borrow a register, and
+ modify the instruction to something like:
+
+ jmp *0x2fe2(%rcx)
+
+ with %rcx having its value adjusted to contain the original %rip
+ value.
+
+ Now if the displaced step does not succeed, then %rcx will be left
+ with a corrupted value. Obviously corrupting any register is bad; in
+ the bug report this problem was spotted because %rcx is used as a
+ function argument register.
+
+ And finally, why might a displaced step not succeed? Asynchronous
+ signals provides one reason. GDB sets up for the displaced step and,
+ at that precise moment, the OS delivers a signal (SIGALRM in the bug
+ report), the signal stops the inferior at the address of the displaced
+ instruction. GDB cancels the displaced instruction, handles the
+ signal, and then tries again with the displaced step. But it is that
+ first cancellation of the displaced step that causes the problem; in
+ that case GDB (correctly) sees the displaced step as having not
+ completed, and so does not perform the architecture specific fixup,
+ leaving the register corrupted.
+
+ The reason why I think AArch64, rs600, i386, and s390 are not effected
+ by this problem is that I don't believe these architectures make use
+ of any temporary registers, so when a displaced step is not completed
+ successfully, the minimal fix up is sufficient.
+
+ On amd64 we use at most one temporary register.
+
+ On ARM, looking at arm_displaced_step_copy_insn_closure, we could
+ modify up to 16 temporary registers, and the instruction being
+ displaced stepped could be expanded to multiple replacement
+ instructions, which increases the chances of this bug triggering.
+
+ This commit only aims to address the issue on amd64 for now, though I
+ believe that the approach I'm proposing here might be applicable for
+ ARM too.
+
+ What I propose is that we always call gdbarch_displaced_step_fixup.
+
+ We will now pass an extra argument to gdbarch_displaced_step_fixup,
+ this a boolean that indicates whether GDB thinks the displaced step
+ completed successfully or not.
+
+ When this flag is false this indicates that the displaced step halted
+ for some "other" reason. On ARM GDB can potentially read the
+ inferior's program counter in order figure out how far through the
+ sequence of replacement instructions we got, and from that GDB can
+ figure out what fixup needs to be performed.
+
+ On targets like amd64 the problem is slightly easier as displaced
+ stepping only uses a single replacement instruction. If the displaced
+ step didn't complete the GDB knows that the single instruction didn't
+ execute.
+
+ The point is that by always calling gdbarch_displaced_step_fixup, each
+ architecture can now ensure that the inferior state is fixed up
+ correctly in all cases, not just the success case.
+
+ On amd64 this ensures that we always restore the temporary register
+ value, and so bug PR gdb/22921 is resolved.
+
+ In order to move all architectures to this new API, I have moved the
+ minimal roll-back version of the code inside the architecture specific
+ fixup functions for AArch64, rs600, s390, and ARM. For all of these
+ except ARM I think this is good enough, as no temporaries are used all
+ that's needed is the program counter restore anyway.
+
+ For ARM the minimal code is no worse than what we had before, though I
+ do consider this architecture's displaced-stepping broken.
+
+ I've updated the gdb.arch/amd64-disp-step.exp test to cover the
+ 'jmpq*' instruction that was causing problems in the original bug, and
+ also added support for testing the displaced step in the presence of
+ asynchronous signal delivery.
+
+ I've also added two new tests (for amd64 and i386) that check that GDB
+ can correctly handle displaced stepping over a single instruction that
+ branches to itself. I added these tests after a first version of this
+ patch relied too much on checking the program-counter value in order
+ to see if the displaced instruction had executed. This works fine in
+ almost all cases, but when an instruction branches to itself a pure
+ program counter check is not sufficient. The new tests expose this
+ problem.
+
+ Bug: https://sourceware.org/bugzilla/show_bug.cgi?id=22921
+
+ Approved-By: Pedro Alves <pedro@palves.net>
+
+2023-04-06 Alan Modra <amodra@gmail.com>
+
+ Re: objcopy write_debugging_info memory leaks
+ Oops, tried to free too much
+
+ * wrstabs.c (write_stabs_in_sections_debugging_info): Don't
+ free strings.
+
+2023-04-06 Alan Modra <amodra@gmail.com>
+
+ objdump print_debugging_info memory leaks
+ Fix memory leaks and do a general tidy of the code for printing coff
+ and stabs debug.
+
+ * prdbg.c: Delete unnneeded forward function declarations.
+ Delete unnecessary casts throughout. Free all strings
+ returned from pop_type throughout file.
+ (struct pr_stack): Delete "num_parents". Replace tests for
+ "num_parents" non-zero with tests of "parents" non-NULL
+ throughout. Free "parents" before assigning, and set to NULL
+ after freeing. Remove const from "method". Always strdup
+ strings assigned to method, and free before assigning.
+ (print_debugging_info): Free info.stack and info.filename.
+
+2023-04-06 Alan Modra <amodra@gmail.com>
+
+ objdump -g on gcc COFF/PE files
+ objdump -g can't be used much. Trying to dump PE files invariably
+ seems to run into "debug_name_type: no current file" or similar
+ errors, because parse_coff expects a C_FILE symbol to be the first
+ symbol. Dumping -gstabs output works since the N_SO stab is present.
+ Pre-setting the file name won't hurt stabs dumping.
+
+ * rddbg.c (read_debugging_info): Call debug_set_filename.
+
+2023-04-06 Alan Modra <amodra@gmail.com>
+
+ gas/write.c use better types
+ A tiny tidy.
+
+ * write.c (frags_chained): Make it a bool.
+ (n_fixups): Make it unsigned.
+
+2023-04-06 Alan Modra <amodra@gmail.com>
+
+ objcopy write_debugging_info memory leaks
+ The old stabs code didn't bother too much about freeing memory.
+ This patch corrects that and avoids some dubious copying of strings.
+
+ * objcopy.c (write_debugging_info): Free both strings and
+ syms on failure to create sections.
+ * wrstabs.c: Delete unnecessary forward declarations and casts
+ throughout file.
+ (stab_write_symbol_and_free): New function. Use it
+ throughout, simplifying return paths.
+ (stab_push_string): Don't strdup string. Use it thoughout
+ for malloced strings.
+ (stab_push_string_dup): New function. Use it throughout for
+ strings in auto buffers.
+ (write_stabs_in_sections_debugging_info): Free malloced memory.
+ (stab_enum_type): Increase buffer sizing for worst case.
+ (stab_range_type, stab_array_type): Reduce buffer size.
+ (stab_set_type): Likewise.
+ (stab_method_type): Free args on error return. Correct
+ buffer size.
+ (stab_struct_field): Fix memory leaks.
+ (stab_class_static_member, stab_class_baseclass): Likewise.
+ (stab_start_class_type): Likewise. Correct buffer size.
+ (stab_class_start_method): Correct buffer size.
+ (stab_class_method_var): Free memory on error return.
+ (stab_start_function): Fix "rettype" memory leak.
+
+2023-04-06 GDB Administrator <gdbadmin@sourceware.org>
+
+ Automatic date update in version.in
+
+2023-04-05 Thiago Jung Bauermann <thiago.bauermann@linaro.org>
+
+ gdb/testsuite: Default to assembler's preferred debug format in asm-source.exp
+ The stabs debug format is obsolete and there's no reason to think that
+ toolchains still have good support for it. Therefore, if a specific debug
+ format wasn't set in asm-source.exp then leave it to the assembler to
+ decide which one to use.
+
+ Reviewed-By: Tom Tromey <tom@tromey.com>
+
+2023-04-05 Thiago Jung Bauermann <thiago.bauermann@linaro.org>
+
+ gdb: Fix reading of partial symtabs in dbxread.c
+ After commit 9675da25357c ("Use unrelocated_addr in minimal symbols"),
+ aarch64-linux started failing gdb.asm/asm-source.exp:
+
+ Running /home/thiago.bauermann/src/binutils-gdb/gdb/testsuite/gdb.asm/asm-source.exp ...
+ PASS: gdb.asm/asm-source.exp: f at main
+ PASS: gdb.asm/asm-source.exp: n at main
+ PASS: gdb.asm/asm-source.exp: next over macro
+ FAIL: gdb.asm/asm-source.exp: step into foo2
+ PASS: gdb.asm/asm-source.exp: info target
+ PASS: gdb.asm/asm-source.exp: info symbol
+ PASS: gdb.asm/asm-source.exp: list
+ PASS: gdb.asm/asm-source.exp: search
+ FAIL: gdb.asm/asm-source.exp: f in foo2
+ FAIL: gdb.asm/asm-source.exp: n in foo2 (the program exited)
+ FAIL: gdb.asm/asm-source.exp: bt ALL in foo2
+ FAIL: gdb.asm/asm-source.exp: bt 2 in foo2
+ PASS: gdb.asm/asm-source.exp: s 2
+ PASS: gdb.asm/asm-source.exp: n 2
+ FAIL: gdb.asm/asm-source.exp: bt 3 in foo3
+ PASS: gdb.asm/asm-source.exp: info source asmsrc1.s
+ FAIL: gdb.asm/asm-source.exp: finish from foo3 (the program is no longer running)
+ FAIL: gdb.asm/asm-source.exp: info source asmsrc2.s
+ PASS: gdb.asm/asm-source.exp: info sources
+ FAIL: gdb.asm/asm-source.exp: info line
+ FAIL: gdb.asm/asm-source.exp: next over foo3 (the program is no longer running)
+ FAIL: gdb.asm/asm-source.exp: return from foo2
+ PASS: gdb.asm/asm-source.exp: look at global variable
+ PASS: gdb.asm/asm-source.exp: x/i &globalvar
+ PASS: gdb.asm/asm-source.exp: disassem &globalvar, (int *) &globalvar+1
+ PASS: gdb.asm/asm-source.exp: look at static variable
+ PASS: gdb.asm/asm-source.exp: x/i &staticvar
+ PASS: gdb.asm/asm-source.exp: disassem &staticvar, (int *) &staticvar+1
+ PASS: gdb.asm/asm-source.exp: look at static function
+
+ The problem is simple: a pair of parentheses was removed from the
+ expression calculating text_end and thus text_size was only added if
+ lowest_text_address wasn't equal to -1.
+
+ This patch restores the previous behaviour and fixes the testcase.
+ Tested on native aarch64-linux.
+
+ Reviewed-By: Tom Tromey <tom@tromey.com>
+
+2023-04-05 Eli Zaretskii <eliz@gnu.org>
+
+ Improve documentation of GDB build requirements and options
+ MPFR is now mandatory, so its previous description in Requirements
+ was inappropriate and out of place. In addition, the description
+ of how to go about specifying 'configure' time options for
+ building with libraries was highly repetitive. Some of the text
+ was also outdated and used wrong markup.
+
+ Original patch and suggestions from Philippe Blain
+ <levraiphilippeblain@gmail.com>.
+
+ ChangeLog:
+ 2023-04-05 Eli Zaretskii <eliz@gnu.org>
+
+ * gdb/doc/gdb.texinfo (Requirements, Configure Options): Update and
+ rearrange; improve and fix markup.
+
+2023-04-05 Tankut Baris Aktemur <tankut.baris.aktemur@intel.com>
+
+ gdb, doc: add the missing '-gid' option to 'info threads'
+ The 'info threads' command does not show the '-gid' option
+ in the syntax. Add the option. The flag is already explained
+ in the command description and used in the examples.
+
+ Approved-By: Eli Zaretskii <eliz@gnu.org>
+
+2023-04-05 Tankut Baris Aktemur <tankut.baris.aktemur@intel.com>
+
+ gdb: boolify 'should_print_thread'
+ Convert the return type of 'should_print_thread' from int to bool.
+
+ Reviewed-By: Tom Tromey <tom@tromey.com>
+
+2023-04-05 Simon Marchi <simon.marchi@polymtl.ca>
+
+ gdb: make find_thread_ptid a process_stratum_target method
+ Make find_thread_ptid (the overload that takes a process_stratum_target)
+ a method of process_stratum_target.
+
+ Change-Id: Ib190a925a83c6b93e9c585dc7c6ab65efbdd8629
+ Reviewed-By: Tom Tromey <tom@tromey.com>
+
+2023-04-05 Simon Marchi <simon.marchi@polymtl.ca>
+
+ gdb: make find_thread_ptid an inferior method
+ Make find_thread_ptid (the overload that takes an inferior) a method of
+ struct inferior.
+
+ Change-Id: Ie5b9fa623ff35aa7ddb45e2805254fc8e83c9cd4
+ Reviewed-By: Tom Tromey <tom@tromey.com>
+
+2023-04-05 GDB Administrator <gdbadmin@sourceware.org>
+
+ Automatic date update in version.in
+
+2023-04-04 Jan Beulich <jbeulich@suse.com>
+
+ bfd+ld: when / whether to generate .c files
+ Having been irritated by seeing bfd/elf{32,64}-aarch64.c to be re-
+ generated in x86-only builds, I came across 769a27ade588 ("Re: bfd
+ BLD-POTFILES.in dependencies"). I think this went slightly too far, as
+ outside of maintainer mode dependencies will cause the subset of files
+ to be (re-)generated which are actually needed for the build.
+ Generating them all is only needed when wanting to update certain files
+ under bfd/po/, i.e. in maintainer mode.
+
+ In the course of looking around in an attempt to try to understand how
+ things are meant to work, I further noticed that ld has got things
+ slightly wrong too: BLD-POTFILES.in depending on $(BLD_POTFILES) isn't
+ quite right (the output doesn't change when any of the enumerated files
+ changes; it's the mere presence which matters); like in bfd it looks
+ like we would better extend BUILT_SOURCES accordingly.
+
+ Furthermore it became apparent that ld fails to enumerate the .c files
+ generated from the .l and .y ones. While in their absence it was benign
+ whether translatable strings in the source files were actually marked as
+ such, this now becomes relevant. Mark respective strings at the same
+ time, but skipping ones which look to be of interest for debugging
+ purposes only (e.g. such used by printf() enclosed in #ifdef TRACE).
+
+2023-04-04 Alan Modra <amodra@gmail.com>
+
+ Use bfd_alloc memory for read_debugging_info storage
+ Trying to free malloc'd memory used by the stabs and coff debug info
+ parsers is complicated, and traversing the trees generated requires a
+ lot of code. It's better to bfd_alloc the memory which allows it all
+ to be freed without fuss when the bfd is closed. In the process of
+ doing this I reverted most of commit a6336913332.
+
+ Some of the stabs handling code grows arrays of pointers with realloc,
+ to deal with arbitrary numbers of fields, function args, etc. The
+ code still does that but copies over to bfd_alloc memory when
+ finished. The alternative is to parse twice, once to size, then again
+ to populate the arrays. I think that complication is unwarranted.
+
+ Note that there is a greater than zero chance this patch breaks
+ something, eg. that I missed an attempt to free obj_alloc memory.
+ Also it seems there are no tests in the binutils testsuite aimed at
+ exercising objdump --debugging.
+
+ * budbg.h (finish_stab, parse_stab): Update prototypes
+ * debug.c: Include bucomm.h.
+ (struct debug_handle): Add "abfd" field.
+ (debug_init): Add "abfd" param. bfd_alloc handle.
+ (debug_xalloc, debug_xzalloc): New functions. Use throughout
+ in place of xmalloc and memset.
+ (debug_start_source): Remove "name_used" param.
+ * debug.h (debug_init, debug_start_source): Update prototypes.
+ (debug_xalloc, debug_xzalloc): Declare.
+ * objcopy.c (copy_object): Don't free dhandle.
+ * objdump.c (dump_bfd): Likewise.
+ * rdcoff.c (coff_get_slot): Add dhandle arg. debug_xzalloc
+ memory in place of xcalloc. Update callers.
+ (parse_coff_struct_type): Don't leak on error return. Copy
+ fields over to debug_xalloc memory.
+ (parse_coff_enum_type): Copy names and vals over the
+ debug_xalloc memory.
+ * rddbg.c (read_debugging_info): Adjust debug_init call.
+ Don't free dhandle.
+ (read_section_stabs_debugging_info): Don't free shandle.
+ Adjust parse_stab call. Call finish_stab on error return.
+ (read_symbol_stabs_debugging_info): Similarly.
+ * stabs.c (savestring): Delete unnecessary forward declaration.
+ Add dhandle param. debug_xalloc memory. Update callers.
+ (start_stab): Delete unnecessary casts.
+ (finish_stab): Add "emit" param. Free file_types, so_string,
+ and stabs handle.
+ (parse_stab): Delete string_used param. Revert code dealing
+ with string_used. Copy so_string passed to debug_set_filename
+ and stored as main_filename to debug_xalloc memory. Similarly
+ for string passed to debug_start_source and push_bincl. Copy
+ args to debug_xalloc memory. Don't leak args.
+ (parse_stab_enum_type): Copy names and values to debug_xalloc
+ memory. Don't free name.
+ (parse_stab_struct_type): Don't free fields.
+ (parse_stab_baseclasses): Delete unnecessary cast.
+ (parse_stab_struct_fields): Return debug_xalloc fields.
+ (parse_stab_cpp_abbrev): Use debug_xalloc for _vb$ type name.
+ (parse_stab_one_struct_field): Don't free name.
+ (parse_stab_members): Copy variants and methods to
+ debug_xalloc memory. Don't free name or argtypes.
+ (parse_stab_argtypes): Use debug_xalloc memory for physname
+ and args.
+ (push_bincl): Add dhandle param. Use debug_xalloc memory.
+ (stab_record_variable): Use debug_xalloc memory.
+ (stab_emit_pending_vars): Don't free var list.
+ (stab_find_slot): Add dhandle param. Use debug_xzalloc
+ memory. Update all callers.
+ (stab_find_tagged_type): Don't free name. Use debug_xzalloc.
+ (stab_demangle_qualified): Don't free name.
+ (stab_demangle_template): Don't free s1.
+ (stab_demangle_args): Tidy pvarargs refs. Copy *pargs on
+ success to debug_xalloc memory, free on failure.
+ (stab_demangle_fund_type): Don't free name.
+ (stab_demangle_v3_arglist): Copy args to debug_xalloc memory.
+ Don't free dt.
+
+2023-04-04 GDB Administrator <gdbadmin@sourceware.org>
+
+ Automatic date update in version.in
+
+2023-04-03 Tom Tromey <tromey@adacore.com>
+
+ Add readMemory and writeMemory requests to DAP
+ This adds the DAP readMemory and writeMemory requests. A small change
+ to the evaluation code is needed in order to test this -- this is one
+ of the few ways for a client to actually acquire a memory reference.
+
+2023-04-03 Andrew Burgess <aburgess@redhat.com>
+
+ gdb: cleanup around some set_momentary_breakpoint_at_pc calls
+ I noticed a couple of places in infrun.c where we call
+ set_momentary_breakpoint_at_pc, and then set the newly created
+ breakpoint's thread field, these are in:
+
+ insert_exception_resume_breakpoint
+ insert_exception_resume_from_probe
+
+ Function set_momentary_breakpoint_at_pc calls
+ set_momentary_breakpoint, which always creates the breakpoint as
+ thread-specific for the current inferior_thread().
+
+ The two insert_* functions mentioned above take an arbitrary
+ thread_info* as an argument and set the breakpoint::thread to hold the
+ thread number of that arbitrary thread.
+
+ However, the insert_* functions store the breakpoint pointer within
+ the current inferior_thread(), so we know that the thread being passed
+ in must be the currently selected thread.
+
+ What this means is that we can:
+
+ 1. Assert that the thread being passed in is the currently selected
+ thread, and
+
+ 2. No longer adjust the breakpoint::thread field, this will already
+ have been set correctly be calling set_momentary_breakpoint_at_pc.
+
+ There should be no user visible changes after this commit.
+
+2023-04-03 Andrew Burgess <aburgess@redhat.com>
+
+ gdb: don't always print breakpoint location after failed condition check
+ Consider the following session:
+
+ (gdb) list some_func
+ 1 int
+ 2 some_func ()
+ 3 {
+ 4 int *p = 0;
+ 5 return *p;
+ 6 }
+ 7
+ 8 void
+ 9 foo ()
+ 10 {
+ (gdb) break foo if (some_func ())
+ Breakpoint 1 at 0x40111e: file bpcond.c, line 11.
+ (gdb) r
+ Starting program: /tmp/bpcond
+
+ Program received signal SIGSEGV, Segmentation fault.
+ 0x0000000000401116 in some_func () at bpcond.c:5
+ 5 return *p;
+ Error in testing condition for breakpoint 1:
+ The program being debugged stopped while in a function called from GDB.
+ Evaluation of the expression containing the function
+ (some_func) will be abandoned.
+ When the function is done executing, GDB will silently stop.
+
+ Breakpoint 1, 0x0000000000401116 in some_func () at bpcond.c:5
+ 5 return *p;
+ (gdb)
+
+ What happens here is the breakpoint condition includes a call to an
+ inferior function, and the inferior function segfaults. We can see
+ that GDB reports the segfault, and then gives an error message that
+ indicates that an inferior function call was interrupted.
+
+ After this GDB appears to report that it is stopped at Breakpoint 1,
+ inside some_func.
+
+ I find this second stop report a little confusing. While it is true
+ that GDB stopped as a result of hitting breakpoint 1, I think the
+ message GDB currently prints might give the impression that GDB is
+ actually stopped at a location of breakpoint 1, which is not the case.
+
+ Also, I find the second stop message draws attention away from
+ the "Program received signal SIGSEGV, Segmentation fault" stop
+ message, and this second stop might be thought of as replacing in
+ someway the earlier message.
+
+ In short, I think things would be clearer if the second stop message
+ were not reported at all, so the output should, I think, look like
+ this:
+
+ (gdb) list some_func
+ 1 int
+ 2 some_func ()
+ 3 {
+ 4 int *p = 0;
+ 5 return *p;
+ 6 }
+ 7
+ 8 void
+ 9 foo ()
+ 10 {
+ (gdb) break foo if (some_func ())
+ Breakpoint 1 at 0x40111e: file bpcond.c, line 11.
+ (gdb) r
+ Starting program: /tmp/bpcond
+
+ Program received signal SIGSEGV, Segmentation fault.
+ 0x0000000000401116 in some_func () at bpcond.c:5
+ 5 return *p;
+ Error in testing condition for breakpoint 1:
+ The program being debugged stopped while in a function called from GDB.
+ Evaluation of the expression containing the function
+ (some_func) will be abandoned.
+ When the function is done executing, GDB will silently stop.
+ (gdb)
+
+ The user can still find the number of the breakpoint that triggered
+ the initial stop in this line:
+
+ Error in testing condition for breakpoint 1:
+
+ But there's now only one stop reason reported, the SIGSEGV, which I
+ think is much clearer.
+
+ To achieve this change I set the bpstat::print field when:
+
+ (a) a breakpoint condition evaluation failed, and
+
+ (b) the $pc of the thread changed during condition evaluation.
+
+ I've updated the existing tests that checked the error message printed
+ when a breakpoint condition evaluation failed.
+
+2023-04-03 Andrew Burgess <aburgess@redhat.com>
+
+ gdb: avoid repeated signal reporting during failed conditional breakpoint
+ Consider the following case:
+
+ (gdb) list some_func
+ 1 int
+ 2 some_func ()
+ 3 {
+ 4 int *p = 0;
+ 5 return *p;
+ 6 }
+ 7
+ 8 void
+ 9 foo ()
+ 10 {
+ (gdb) break foo if (some_func ())
+ Breakpoint 1 at 0x40111e: file bpcond.c, line 11.
+ (gdb) r
+ Starting program: /tmp/bpcond
+
+ Program received signal SIGSEGV, Segmentation fault.
+ 0x0000000000401116 in some_func () at bpcond.c:5
+ 5 return *p;
+ Error in testing breakpoint condition:
+ The program being debugged was signaled while in a function called from GDB.
+ GDB remains in the frame where the signal was received.
+ To change this behavior use "set unwindonsignal on".
+ Evaluation of the expression containing the function
+ (some_func) will be abandoned.
+ When the function is done executing, GDB will silently stop.
+
+ Program received signal SIGSEGV, Segmentation fault.
+
+ Breakpoint 1, 0x0000000000401116 in some_func () at bpcond.c:5
+ 5 return *p;
+ (gdb)
+
+ Notice that this line:
+
+ Program received signal SIGSEGV, Segmentation fault.
+
+ Appears twice in the output. The first time is followed by the
+ current location. The second time is a little odd, why do we print
+ that?
+
+ Printing that line is controlled, in part, by a global variable,
+ stopped_by_random_signal. This variable is reset to zero in
+ handle_signal_stop, and is set if/when GDB figures out that the
+ inferior stopped due to some random signal.
+
+ The problem is, in our case, GDB first stops at the breakpoint for
+ foo, and enters handle_signal_stop and the stopped_by_random_signal
+ global is reset to 0.
+
+ Later within handle_signal_stop GDB calls bpstat_stop_status, it is
+ within this function (via bpstat_check_breakpoint_conditions) that the
+ breakpoint condition is checked, and, we end up calling the inferior
+ function (some_func in our example above).
+
+ In our case above the thread performing the inferior function call
+ segfaults in some_func. GDB catches the SIGSEGV and handles the stop,
+ this causes us to reenter handle_signal_stop. The global variable
+ stopped_by_random_signal is updated, this time it is set to true
+ because the thread stopped due to SIGSEGV. As a result of this we
+ print the first instance of the line (as seen above in the example).
+
+ Finally we unwind GDB's call stack, the inferior function call is
+ complete, and we return to the original handle_signal_stop. However,
+ the stopped_by_random_signal global is still carrying the value as
+ computed for the inferior function call's stop, which is why we now
+ print a second instance of the line, as seen in the example.
+
+ To prevent this, I propose adding a scoped_restore before we start an
+ inferior function call. This will save and restore the global
+ stopped_by_random_signal value.
+
+ With this done, the output from our example is now this:
+
+ (gdb) list some_func
+ 1 int
+ 2 some_func ()
+ 3 {
+ 4 int *p = 0;
+ 5 return *p;
+ 6 }
+ 7
+ 8 void
+ 9 foo ()
+ 10 {
+ (gdb) break foo if (some_func ())
+ Breakpoint 1 at 0x40111e: file bpcond.c, line 11.
+ (gdb) r
+ Starting program: /tmp/bpcond
+
+ Program received signal SIGSEGV, Segmentation fault.
+ 0x0000000000401116 in some_func () at bpcond.c:5
+ 5 return *p;
+ Error in testing condition for breakpoint 1:
+ The program being debugged stopped while in a function called from GDB.
+ Evaluation of the expression containing the function
+ (some_func) will be abandoned.
+ When the function is done executing, GDB will silently stop.
+
+ Breakpoint 1, 0x0000000000401116 in some_func () at bpcond.c:5
+ 5 return *p;
+ (gdb)
+
+ We now only see the 'Program received signal SIGSEGV, ...' line once,
+ which I think makes more sense.
+
+ Finally, I'm aware that the last few lines, that report the stop as
+ being at 'Breakpoint 1', when this is not where the thread is actually
+ located anymore, is not great. I'll address that in the next commit.
+
+2023-04-03 Andrew Burgess <aburgess@redhat.com>
+
+ gdbserver: allow agent expressions to fail with invalid memory access
+ This commit extends gdbserver to take account of a failed memory
+ access from agent_mem_read, and to return a new eval_result_type
+ expr_eval_invalid_memory_access.
+
+ I have only updated the agent_mem_read calls related directly to
+ reading memory, I have not updated any of the calls related to
+ tracepoint data collection. This is just because I'm not familiar
+ with that area of gdb/gdbserver, and I don't want to break anything,
+ so leaving the existing behaviour untouched seems like the safest
+ approach.
+
+ I've then updated gdb.base/bp-cond-failure.exp to test evaluating the
+ breakpoints on the target, and have also extended the test so that it
+ checks for different sizes of memory access.
+
+2023-04-03 Andrew Burgess <aburgess@redhat.com>
+
+ gdbserver: allows agent_mem_read to return an error code
+ Currently the gdbserver function agent_mem_read ignores any errors
+ from calling read_inferior_memory. This means that if there is an
+ attempt to access invalid memory then this will appear to succeed.
+
+ In this patch I update agent_mem_read so that if read_inferior_memory
+ fails, agent_mem_read will return an error code.
+
+ However, none of the callers of agent_mem_read actually check the
+ return value, so this commit will have no effect on anything. In the
+ next commit I will update the users of agent_mem_read to check for the
+ error code.
+
+ I've also updated the header comments on agent_mem_read to better
+ reflect what the function does, and its possible return values.
+
+2023-04-03 Andrew Burgess <aburgess@redhat.com>
+
+ gdb: include breakpoint number in testing condition error message
+ When GDB fails to test the condition of a conditional breakpoint, for
+ whatever reason, the error message looks like this:
+
+ (gdb) break foo if (*(int *) 0) == 1
+ Breakpoint 1 at 0x40111e: file bpcond.c, line 11.
+ (gdb) r
+ Starting program: /tmp/bpcond
+ Error in testing breakpoint condition:
+ Cannot access memory at address 0x0
+
+ Breakpoint 1, foo () at bpcond.c:11
+ 11 int a = 32;
+ (gdb)
+
+ The line I'm interested in for this commit is this one:
+
+ Error in testing breakpoint condition:
+
+ In the case above we can figure out that the problematic breakpoint
+ was #1 because in the final line of the message GDB reports the stop
+ at breakpoint #1.
+
+ However, in the next few patches I plan to change this. In some cases
+ I don't think it makes sense for GDB to report the stop as being at
+ breakpoint #1, consider this case:
+
+ (gdb) list some_func
+ 1 int
+ 2 some_func ()
+ 3 {
+ 4 int *p = 0;
+ 5 return *p;
+ 6 }
+ 7
+ 8 void
+ 9 foo ()
+ 10 {
+ (gdb) break foo if (some_func ())
+ Breakpoint 1 at 0x40111e: file bpcond.c, line 11.
+ (gdb) r
+ Starting program: /tmp/bpcond
+
+ Program received signal SIGSEGV, Segmentation fault.
+ 0x0000000000401116 in some_func () at bpcond.c:5
+ 5 return *p;
+ Error in testing breakpoint condition:
+ The program being debugged was signaled while in a function called from GDB.
+ GDB remains in the frame where the signal was received.
+ To change this behavior use "set unwindonsignal on".
+ Evaluation of the expression containing the function
+ (some_func) will be abandoned.
+ When the function is done executing, GDB will silently stop.
+
+ Program received signal SIGSEGV, Segmentation fault.
+
+ Breakpoint 1, 0x0000000000401116 in some_func () at bpcond.c:5
+ 5 return *p;
+ (gdb)
+
+ Notice that, the final lines of output reports the stop as being at
+ breakpoint #1, even though the inferior in not located within
+ some_func, and it's certainly not located at the breakpoint location.
+
+ I find this behaviour confusing, and propose that this should be
+ changed. However, if I make that change then every reference to
+ breakpoint #1 will be lost from the error message.
+
+ So, in this commit, in preparation for the later commits, I propose to
+ change the 'Error in testing breakpoint condition:' line to this:
+
+ Error in testing condition for breakpoint NUMBER:
+
+ where NUMBER will be filled in as appropriate. Here's the first
+ example with the updated error:
+
+ (gdb) break foo if (*(int *) 0) == 0
+ Breakpoint 1 at 0x40111e: file bpcond.c, line 11.
+ (gdb) r
+ Starting program: /tmp/bpcond
+ Error in testing condition for breakpoint 1:
+ Cannot access memory at address 0x0
+
+ Breakpoint 1, foo () at bpcond.c:11
+ 11 int a = 32;
+ (gdb)
+
+ The breakpoint number does now appear twice in the output, but I don't
+ see that as a negative.
+
+ This commit just changes the one line of the error, and updates the
+ few tests that either included the old error in comments, or actually
+ checked for the error in the expected output.
+
+ As the only test that checked the line I modified is a Python test,
+ I've added a new test that doesn't rely on Python that checks the
+ error message in detail.
+
+ While working on the new test, I spotted that it would fail when run
+ with native-gdbserver and native-extended-gdbserver target boards.
+ This turns out to be due to a gdbserver bug. To avoid cluttering this
+ commit I've added a work around to the new test script so that the
+ test passes for the remote boards, in the next few commits I will fix
+ gdbserver, and update the test script to remove the work around.
+
+2023-04-03 Alan Modra <amodra@gmail.com>
+
+ asan: csky floatformat_to_double uninitialised value
+ * csky-dis.c (csky_print_operand <OPRND_TYPE_FCONSTANT>): Don't
+ access ibytes after read_memory_func error. Change type of
+ ibytes to avoid casts.
+
+2023-04-03 Andrew Burgess <aburgess@redhat.com>
+
+ gdb/riscv: fix regressions in gdb.base/unwind-on-each-insn.exp
+ This commit builds on the previous one to fix all the remaining
+ failures in gdb.base/unwind-on-each-insn.exp for RISC-V.
+
+ The problem we have in gdb.base/unwind-on-each-insn.exp is that, when
+ we are in the function epilogue, the previous frame and stack pointer
+ values are being restored, and so, the values that we calculated
+ during the function prologue are no longer suitable.
+
+ Here's an example from the function 'bar' in the mentioned test. This
+ was compiled for 64-bit RISC-V with compressed instruction support:
+
+ Dump of assembler code for function bar:
+ 0x000000000001018a <+0>: add sp,sp,-32
+ 0x000000000001018c <+2>: sd ra,24(sp)
+ 0x000000000001018e <+4>: sd fp,16(sp)
+ 0x0000000000010190 <+6>: add fp,sp,32
+ 0x0000000000010192 <+8>: sd a0,-24(fp)
+ 0x0000000000010196 <+12>: ld a0,-24(fp)
+ 0x000000000001019a <+16>: jal 0x10178 <foo>
+ 0x000000000001019e <+20>: nop
+ 0x00000000000101a0 <+22>: ld ra,24(sp)
+ 0x00000000000101a2 <+24>: ld fp,16(sp)
+ 0x00000000000101a4 <+26>: add sp,sp,32
+ 0x00000000000101a6 <+28>: ret
+ End of assembler dump.
+
+ When we are at address 0x101a4 the previous instruction has restored
+ the frame-pointer, as such GDB's (current) preference for using the
+ frame-pointer as the frame base address is clearly not going to work.
+ We need to switch to using the stack-pointer instead.
+
+ At address 0x101a6 the previous instruction has restored the
+ stack-pointer value. Currently GDB will not understand this and so
+ will still assume the stack has been decreased by 32 bytes in this
+ function.
+
+ My proposed solution is to extend GDB such that GDB will scan the
+ instructions at the current $pc looking for this pattern:
+
+ ld fp,16(sp)
+ add sp,sp,32
+ ret
+
+ Obviously the immediates can change, but the basic pattern indicates
+ that the function is in the process of restoring state before
+ returning. If GDB sees this pattern then GDB can use the inferior's
+ position within this instruction sequence to help calculate the
+ correct frame-id.
+
+ With this implemented then gdb.base/unwind-on-each-insn.exp now fully
+ passes.
+
+ Obviously what I've implemented is just a heuristic. It's not going
+ to work for every function. If the compiler reorders the
+ instructions, or merges the epilogue back into the function body then
+ GDB is once again going to get the frame-id wrong.
+
+ I'm OK with that, we're no worse off that we are right now in that
+ situation (plus we can always improve the heuristic later).
+
+ Remember, this is for debugging code without debug information,
+ and (in our imagined situation) with more aggressive levels of
+ optimisation being used. Obviously GDB is going to struggle in these
+ situations.
+
+ My thinking is, lets get something in place now. Then, later, if
+ possible, we might be able to improve the logic to cover more
+ situations -- if there's an interest in doing so. But I figure we
+ need something in place as a starting point.
+
+ After this commit gdb.base/unwind-on-each-insn.exp passes with no
+ failures on RV64.
+
+2023-04-03 Andrew Burgess <aburgess@redhat.com>
+
+ gdb/riscv: support c.ldsp and c.lwsp in prologue scanner
+ Add support to the RISC-V prologue scanner for c.ldsp and c.lwsp
+ instructions.
+
+ This fixes some of the failures in gdb.base/unwind-on-each-insn.exp,
+ though there are further failures that are not fixed by this commit.
+
+ This change started as a wider fix that would address all the failures
+ in gdb.base/unwind-on-each-insn.exp, however, that wider fix needed
+ support for the two additional compressed instructions.
+
+ When I added support for those two compressed instructions I noticed
+ that some of the failures in gdb.base/unwind-on-each-insn.exp resolved
+ themselves!
+
+ Here's what's going on:
+
+ The reason for the failures is that GDB is trying to build the
+ frame-id during the last few instructions of the function. These are
+ the instructions that restore the frame and stack pointers just prior
+ to the return instruction itself.
+
+ By the time we reach the function epilogue the stack offset that we
+ calculated during the prologue scan is no longer valid, and so we
+ calculate the wrong frame-id.
+
+ However, in the particular case of interest here, the test function
+ 'foo', the function is so simple and short (the empty function) that
+ GDB's prologue scan could, in theory, scan every instruction of the
+ function.
+
+ I say "could, in theory," because currently GDB stops the prologue
+ scan early when it hits an unknown instruction. The unknown
+ instruction happens to be one of the compressed instructions that I'm
+ adding support for in this commit.
+
+ Now that GDB understands the compressed instructions the prologue scan
+ really does go from the start of the function right up to the current
+ program counter. As such, GDB sees that the stack frame has been
+ allocated, and then deallocated, and so builds the correct frame-id.
+
+ Of course, most real functions are not as simple as the test function
+ 'foo'. As such, we can't usually rely on scanning right up to the end
+ of the function -- there are some instructions we always need to stop
+ at because GDB can't reason about how they change the inferior
+ state (e.g. a function call). The test function 'bar' is just such an
+ example.
+
+ After this commit, we can now build the frame-id correctly for every
+ instruction in 'foo', but there are some tests still failing in 'bar'.
+
+2023-04-03 Andrew Burgess <aburgess@redhat.com>
+
+ gdb/riscv: convert riscv debug settings to new debug print scheme
+ Convert the RISC-V specific debug settings to use the new debug
+ printing scheme. This updates the following settings:
+
+ set/show debug riscv breakpoints
+ set/show debug riscv gdbarch
+ set/show debug riscv infcall
+ set/show debug riscv unwinder
+
+ All of these settings now take a boolean rather than an integer, and
+ all print their output using the new debug scheme.
+
+ There should be no visible change for anyone not turning on debug.
+
+2023-04-03 Andrew Burgess <aburgess@redhat.com>
+
+ opcodes/arm: adjust whitespace in cpsie instruction
+ While I was working on the disassembler styling for ARM I noticed that
+ the whitespace in the cpsie instruction was inconsistent with most of
+ the other ARM disassembly output, the disassembly for cpsie looks like
+ this:
+
+ cpsie if,#10
+
+ notice there's no space before the '#10' immediate, most other ARM
+ instructions have a space before each operand.
+
+ This commit updates the disassembler to add the missing space, and
+ updates the tests I found that tested this instruction.
+
+2023-04-03 Andrew Burgess <aburgess@redhat.com>
+
+ gdb/testsuite: gdb.server/server-kill.exp 'info frame' before kill_server
+ This commit follows on from the following two commits:
+
+ commit 80dc83fd0e70f4d522a534bc601df5e05b81d564
+ Date: Fri Jun 11 11:30:47 2021 +0100
+
+ gdb/remote: handle target dying just before a stepi
+
+ And:
+
+ commit 079f190d4cfc6aa9c934b00a9134bc0fcc172d53
+ Date: Thu Mar 9 10:45:03 2023 +0100
+
+ [gdb/testsuite] Fix gdb.server/server-kill.exp for remote target
+
+ The first of these commits fixed an issue in GDB and tried to extend
+ the gdb.server/server-kill.exp test to cover the GDB fix.
+
+ Unfortunately, the changes to gdb.server/server-kill.exp were not
+ correct, and were causing problems when trying to run with the
+ remote-gdbserver-on-localhost board file.
+
+ The second commit reverts some of the gdb.server/server-kill.exp
+ changes introduced in the first commit so that the test will now work
+ correctly with the remote-gdbserver-on-localhost board file.
+
+ The second commit is just about GDB's testing infrastructure -- it's
+ not about the original fix to GDB from the first commit, the actual
+ GDB change was fine.
+
+ While reviewing the second commit I wanted to check that the problem
+ fixed in the first commit is still being tested by the
+ gdb.server/server-kill.exp script, so I reverted the change to
+ breakpoint.c that is the core of the first commit and ran the test
+ script ..... and saw no failures.
+
+ The first commit is about GDB discovering that gdbserver has died
+ while trying to insert a breakpoint. As soon as GDB spots that
+ gdbserver is gone we mourn the remote inferior, which ends up deleting
+ all the breakpoints associated with the remote inferiors. We then
+ throw an exception which is caught in the insert breakpoints code, and
+ we try to display an error that includes the breakpoint number
+ .... but the breakpoint has already been deleted ... and so GDB
+ crashes.
+
+ After digging a little, what I found is that today, when the test does
+ 'stepi' the first thing we end up doing is calculating the frame-id as
+ part of the stepi logic, it is during this frame-id calculation that
+ we mourn the remote inferior, delete the breakpoints, and throw an
+ exception. The exception is caught by the top level interpreter loop,
+ and so we never try to print the breakpoint number which is what
+ caused the original crash.
+
+ If I add an 'info frame' command to the test script, prior to killing
+ gdbserver, then now when we 'stepi' GDB already has the frame-id
+ calculated, and the first thing we do is try to insert the
+ breakpoints, this will trigger the original bug.
+
+ In order to reproduce this experiment you'll need to change a function
+ in breakpoint.c, like this:
+
+ static void
+ rethrow_on_target_close_error (const gdb_exception &e)
+ {
+ return;
+ }
+
+ Then run gdb.server/server-kill.exp with and without this patch. You
+ should find that without this patch there are zero test failures,
+ while with this patch there will be one failure like this:
+
+ (gdb) PASS: gdb.server/server-kill.exp: test_stepi: info frame
+ Executing on target: kill -9 4513 (timeout = 300)
+ builtin_spawn -ignore SIGHUP kill -9 4513
+ stepi
+ ../../src/gdb/breakpoint.c:2863: internal-error: insert_bp_location: Assertion `bl->owner != nullptr' failed.
+ A problem internal to GDB has been detected,
+ further debugging may prove unreliable.
+ ----- Backtrace -----
+ ...
+
+2023-04-03 Andrew Burgess <aburgess@redhat.com>
+
+ gdb/testsuite: fix failure in gdb.python/py-unwind.exp
+ A potential test failure was introduced with commit:
+
+ commit 6bf5f25bb150c0fbcb125e3ee466ba8f9680310b
+ Date: Wed Mar 8 16:11:30 2023 +0000
+
+ gdb/python: make the gdb.unwinder.Unwinder class more robust
+
+ In this commit a new test was added, however the expected output
+ pattern varies depending on which Python version GDB is linked
+ against.
+
+ Older versions of Python result in output like this:
+
+ (gdb) python global_test_unwinder.name = "foo"
+ Traceback (most recent call last):
+ File "<string>", line 1, in <module>
+ AttributeError: can't set attribute
+ Error while executing Python code.
+ (gdb)
+
+ While more recent versions of Python give a similar, but slightly more
+ verbose error message, like this:
+
+ (gdb) python global_test_unwinder.name = "foo"
+ Traceback (most recent call last):
+ File "<string>", line 1, in <module>
+ AttributeError: can't set attribute 'name'
+ Error while executing Python code.
+ (gdb)
+
+ The test was only accepting the first version of the output. This
+ commit extends the test pattern so that either version will be
+ accepted.
+
+2023-04-03 Luis Machado <luis.machado@arm.com>
+
+ [aarch64] tpidr2: Fix erroneous detection logic for TPIDR2
+ The detection logic for TPIDR2 was implemented incorrectly. Originally
+ the detection was supposed to be through a ptrace error code, but in reality,
+ for backwards compatibility, the detection should be based on the size of
+ the returned iovec.
+
+ For instance, if a target supports both TPIDR and TPIDR2, ptrace will return a
+ iovec size of 16. If a target only supports TPIDR and not TPIDR2, it will
+ return a iovec size of 8, even if we asked for 16 bytes.
+
+ This patch fixes this issue in code that is shared between gdb and gdbserver,
+ therefore both gdb and gdbserver are fixed.
+
+ Tested on AArch64/Linux Ubuntu 20.04.
+
+2023-04-03 GDB Administrator <gdbadmin@sourceware.org>
+
+ Automatic date update in version.in
+
+2023-04-02 Alan Modra <amodra@gmail.com>
+
+ asan: heap buffer overflow printing ecoff debug info file name
+ A case of a string section ending with an unterminated string. Fix it
+ by allocating one more byte and making it zero. Also make functions
+ reading the data return void* so that casts are not needed.
+
+ * ecoff.c (READ): Delete type param. Allocate one extra byte
+ to terminate string sections with a NUL. Adjust invocation.
+ * elfxx-mips.c (READ): Likewise.
+ * libbfd-in.h (_bfd_alloc_and_read): Return a void*.
+ (_bfd_malloc_and_read): Likewise.
+ * libbfd.h: Regenerate.
+
+2023-04-02 Alan Modra <amodra@gmail.com>
+
+ ubsan: aarch64 parse_vector_reg_list
+ tc-aarch64.c:1473:27: runtime error: left shift of 7 by 30 places
+ cannot be represented in type 'int'.
+
+ * config/tc-aarch64.c (parse_vector_reg_list): Avoid UB left
+ shift.
+
+2023-04-02 Alan Modra <amodra@gmail.com>
+
+ rddbg.c stabs FIXMEs
+ This should sort out some very old FIXMEs in code handling stabs
+ debug info. Necessary if we are to fuss over freeing up memory before
+ objdump and objcopy exit. It is of course better from a user
+ viewpoint to *not* free memory, which takes some time, and leave that
+ to process exit. The only reason to do so is that having many memory
+ leaks in binutils/ code tends to hide leaks in bfd/ or opcodes/, which
+ we should care about.
+
+ * budbg.h (parse_stab): Update prototype.
+ * debug.h (debug_start_source): Update prototype.
+ * debug.c (debug_start_source): Add name_used. Set if stashed.
+ * rddbg.c (read_symbol_stabs_debugging_info): Always malloc
+ stab string passed to parse_stab. Free stab string when
+ unreferenced.
+ (read_section_stabs_debugging_info): Likewise, and strings
+ section contents.
+ * stabs.c (parse_stab): Add string_used param. Set if string
+ stashed. Pass to debug_start_source. Realloc file_types
+ array rather that using malloc. Clarify comment about
+ debug_make_indirect_type.
+
+2023-04-02 Alan Modra <amodra@gmail.com>
+
+ Memory leak in process_abbrev_set
+ We may have added some abbrevs to the list before hitting an error.
+ Free the list elements too. free_abbrev_list returns list->next so we
+ need to init it earlier to avoid an uninitialised memory access.
+
+ * dwarf.c (process_abbrev_set): Call free_abbrev_list on errors.
+ Set list->next earlier.
+
+2023-04-02 Simon Marchi <simon.marchi@polymtl.ca>
+
+ gdb: remove unused parameters in print_doc_of_command, apropos_cmd
+ I noticed the prefix parameter was unused in print_doc_of_command. And
+ when removing it, it becomes unused in apropos_cmd.
+
+ Change-Id: Id72980b03fe091b22931e6b85945f412b274ed5e
+
+2023-04-02 GDB Administrator <gdbadmin@sourceware.org>
+
+ Automatic date update in version.in
+
+2023-04-01 Jan Kratochvil <jan.kratochvil@redhat.com>
+
+ gdb/arm: Fix backtrace for pthread_cond_timedwait
+ GDB expected PC should point right after the SVC instruction when the
+ syscall is active. But some active syscalls keep PC pointing to the SVC
+ instruction itself.
+
+ This leads to a broken backtrace like:
+ Backtrace stopped: previous frame identical to this frame (corrupt stack?)
+ #0 0xb6f8681c in pthread_cond_timedwait@@GLIBC_2.4 () from /lib/arm-linux-gnueabihf/libpthread.so.0
+ #1 0xb6e21f80 in ?? ()
+
+ The reason is that .ARM.exidx unwinder gives up if PC does not point
+ right after the SVC (syscall) instruction. I did not investigate why but
+ some syscalls will point PC to the SVC instruction itself. This happens
+ for the "futex" syscall used by pthread_cond_timedwait.
+
+ That normally does not matter as ARM prologue unwinder gets called
+ instead of the .ARM.exidx one. Unfortunately some glibc calls have more
+ complicated prologue where the GDB unwinder fails to properly determine
+ the return address (that is in fact an orthogonal GDB bug). I expect it
+ is due to the "vpush" there in this case but I did not investigate it more:
+
+ Dump of assembler code for function pthread_cond_timedwait@@GLIBC_2.4:
+ 0xb6f8757c <+0>: push {r4, r5, r6, r7, r8, r9, r10, r11, lr}
+ 0xb6f87580 <+4>: mov r10, r2
+ 0xb6f87584 <+8>: vpush {d8}
+
+ Regression tested on armv7l kernel 5.15.32-v7l+ (Raspbian 11).
+
+ Approved-By: Luis Machado <luis.machado@arm.com>
+
+2023-04-01 GDB Administrator <gdbadmin@sourceware.org>
+
+ Automatic date update in version.in
+
+2023-03-31 H.J. Lu <hjl.tools@gmail.com>
+
+ lto: Don't add indirect symbols for versioned aliases in IR
+ Linker adds indirect symbols for versioned symbol aliases, which are
+ created by ".symver foo, foo@FOO", by checking symbol type, value and
+ section so that references to foo will be replaced by references to
+ foo@FOO if foo and foo@FOO have the same symbol type, value and section.
+ But in IR, since all symbols of the same type have the same value and
+ section, we can't tell if a symbol is an alias of another symbol by
+ their types, values and sections. We shouldn't add indirect symbols
+ for versioned symbol aliases in IR.
+
+ bfd/
+
+ PR ld/30281
+ * elflink.c (elf_link_add_object_symbols): Don't add indirect
+ symbols for ".symver foo, foo@FOO" aliases in IR.
+
+ ld/
+
+ PR ld/30281
+ * testsuite/ld-plugin/lto.exp: Add PR ld/30281 test.
+ * testsuite/ld-plugin/pr30281.t: New file.
+ * testsuite/ld-plugin/pr30281.c: Likewise.
+
+2023-03-31 Tom Tromey <tom@tromey.com>
+
+ Fix maybe-uninitialized warning in frame.c
+ A recent patch caused my system gcc (Fedora 36, so gcc 12.2.1) to warn
+ about sym_addr being possibly uninitialized in frame.c. It isn't, but
+ the compiler can't tell. So, this patch initializes the variable. I
+ also fixed a formatting buglet that I missed in review.
+
+2023-03-31 Tom de Vries <tdevries@suse.de>
+
+ [gdb/testsuite] Fix gdb.base/trace-commands.exp with editing off
+ With test-case gdb.base/trace-commands.exp and editing off, I run into fails
+ because multi-line commands are issued using gdb_test_sequence, which
+ doesn't handle them correctly.
+
+ Fix this by using gdb_test instead.
+
+ Tested on x86_64-linux.
+
+ PR testsuite/30288
+ Bug: https://sourceware.org/bugzilla/show_bug.cgi?id=30288
+
+2023-03-31 Tom de Vries <tdevries@suse.de>
+
+ [gdb/testsuite] Fix gdb.threads/threadapply.exp with editing off
+ With test-case gdb.threads/threadapply.exp and editing set to on, we have:
+ ...
+ (gdb) define remove^M
+ Type commands for definition of "remove".^M
+ End with a line saying just "end".^M
+ >remove-inferiors 3^M
+ >end^M
+ (gdb)
+ ...
+ but with editing set to off, we run into:
+ ...
+ (gdb) define remove^M
+ Type commands for definition of "remove".^M
+ End with a line saying just "end".^M
+ >remove-inferiors 3^M
+ end^M
+ >(gdb) FAIL: gdb.threads/threadapply.exp: thread_set=all: try remove: \
+ define remove (timeout)
+ ...
+
+ The commands are issued by this test:
+ ...
+ gdb_define_cmd "remove" {
+ "remove-inferiors 3"
+ }
+ ...
+ which does:
+ - gdb_test_multiple "define remove", followed by
+ - gdb_test_multiple "remove-inferiors 3\nend".
+
+ Proc gdb_test_multiple has special handling for multi-line commands, which
+ splits it up into subcommands, and for each subcommand issues it and then
+ waits for the resulting prompt (the secondary prompt ">" for all but the last
+ subcommand).
+
+ However, that doesn't work as expected in this case because the initial
+ gdb_test_multiple "define remove" fails to match all resulting output, and
+ consequently the secondary prompt resulting from "define remove" is counted as
+ if it was the one resulting from "remove-inferiors 3".
+
+ Fix this by matching the entire output of "define remove", including the
+ secondary prompt.
+
+ Tested on x86_64-linux.
+
+ PR testsuite/30288
+ Bug: https://sourceware.org/bugzilla/show_bug.cgi?id=30288
+
+2023-03-31 Tom Tromey <tom@tromey.com>
+
+ Remove language_demangle
+ I noticed that language_demangle shadows the global
+ "current_language". When I went to fix this, though, I then saw that
+ language_demangle is only called in two places, and has a comment
+ saying it should be removed. This patch removes it. Note that the
+ NULL check in language_demangle is not needed by either of the
+ existing callers.
+
+ Regression tested on x86-64 Fedora 36.
+
+ Approved-By: Simon Marchi <simon.marchi@efficios.com>
+
+2023-03-31 Tom Tromey <tom@tromey.com>
+
+ Fix race in background index-cache writing
+ Tom de Vries pointed out a bug in the index-cache background writer --
+ sometimes it will fail. He also noted that it fails when the number
+ of worker threads is set to zero. These turn out to be the same
+ problem -- the cache can't be written to until the per-BFD's
+ "index_table" member is set.
+
+ This patch avoids the race by rearranging the code slightly, to ensure
+ the cache cannot possibly be written before the member is set.
+
+ Bug: https://sourceware.org/bugzilla/show_bug.cgi?id=30261
+
+2023-03-31 Richard Bunt <richard.bunt@linaro.org>
+
+ GDB: Add `info main' command
+ Allow consumers of GDB to extract the name of the main method. This is
+ most useful for Fortran programs which have a variable main method.
+
+ Used by both MAP and DDT e.g. it is used to detect the presence of debug
+ information.
+
+ Co-Authored-By: Maciej W. Rozycki <macro@embecosm.com>
+
+2023-03-31 Maciej W. Rozycki <macro@embecosm.com>
+
+ GDB: Bring back the handling of DW_CC_program
+ Fix a functional regression and restore the handling of DW_CC_program
+ code of DW_AT_calling_convention attribute for determining the name of
+ the starting function of the program where the DW_AT_main_subprogram
+ attribute has not been provided, such as with Fortran code compiled with
+ GCC versions 4.5.4 and below, or where DWARF version 3 or below has been
+ requested. Without it "main" is considered the starting function. Cf.
+ GCC PR fortran/43414.
+
+ Original code was removed with commit 6209cde4ddb8 ("Delete DWARF
+ psymtab code"), and then an update to complement commit 81873cc81eff
+ ("[gdb/symtab] Support DW_AT_main_subprogram with -readnow.") has also
+ been included here.
+
+2023-03-31 Richard Bunt <richard.bunt@linaro.org>
+
+ GDB: Favor full symbol main name for backtrace stop
+ In the case where a Fortran program has a program name of "main" and
+ there is also a minimal symbol called main, such as with programs built
+ with GCC version 4.4.7 or below, the backtrace will erroneously stop at
+ the minimal symbol rather than the user specified main, e.g.:
+
+ (gdb) bt
+ #0 bar () at .../gdb/testsuite/gdb.fortran/backtrace.f90:17
+ #1 0x0000000000402556 in foo () at .../gdb/testsuite/gdb.fortran/backtrace.f90:21
+ #2 0x0000000000402575 in main () at .../gdb/testsuite/gdb.fortran/backtrace.f90:31
+ #3 0x00000000004025aa in main ()
+ (gdb)
+
+ This patch fixes this issue by increasing the precedence of the full
+ symbol when the language of the current frame is Fortran.
+
+ Newer versions of GCC transform the program name to "MAIN__" in this
+ case, avoiding the problem.
+
+ Co-Authored-By: Maciej W. Rozycki <macro@embecosm.com>
+
+2023-03-31 Ari Hannula <ari.hannula@intel.com>
+
+ gdb: Remove extra if statement
+ The removed if statement is already checked in the parent if else
+ statement.
+
+ Co-Authored-By: Christina Schimpe <christina.schimpe@intel.com>
+
+2023-03-31 Tsukasa OI <research_trasio@irq.a4lg.com>
+
+ RISC-V: Allocate "various" operand type
+ This commit intends to move operands that require very special handling or
+ operand types that are so minor (e.g. only useful on a few instructions)
+ under "W". I also intend this "W" to be "temporary" operand storage until
+ we can find good two character (or less) operand type.
+
+ In this commit, prefetch offset operand "f" for 'Zicbop' extension is moved
+ to "Wif" because of its special handling (and allocating single character
+ "f" for this operand type seemed too much).
+
+ Current expected allocation guideline is as follows:
+
+ 1. 'W'
+ 2. The most closely related single-letter extension in lowercase
+ (strongly recommended but not mandatory)
+ 3. Identify operand type
+
+ The author currently plans to allocate following three-character operand
+ types (for operands including instructions from unratified extensions).
+
+ 1. "Wif" ('Zicbop': fetch offset)
+ 2. "Wfv" (unratified 'Zfa': value operand from FLI.[HSDQ] instructions)
+ 3. "Wfm" / "WfM"
+ 'Zfh', 'F', 'D', 'Q': rounding modes "m" with special handling
+ solely for widening conversion instructions.
+
+ gas/ChangeLog:
+
+ * config/tc-riscv.c (validate_riscv_insn, riscv_ip): Move from
+ "f" to "Wif".
+
+ opcodes/ChangeLog:
+
+ * riscv-dis.c (print_insn_args): Move from "f" to "Wif".
+ * riscv-opc.c (riscv_opcodes): Reflect new operand type.
+
+2023-03-31 Jan Beulich <jbeulich@suse.com>
+
+ x86: convert testcases to use .insn
+ This can't be done for all insns currently encoded with .byte. For one
+ outside of 64-bit mode unused (typically ignored) register encoding bits
+ in VEX/XOP/EVEX prefixes can't be set to their non-default values, since
+ the necessary registers cannot be specified (and some of these bits
+ can't even be used outside of 64-bit mode). And then there are odd tests
+ like the first one in bad-bcast.s: Its purpose is to illegaly set EVEX.b
+ together with EVEX.W (which could be expressed; note though EVEX.W set
+ is invalid on its own), but then it also clears EVEX.B and EVEX.R' plus
+ it sets EVEX.vvvv to other than 0xf (rendering the test ambiguous,
+ because that's another #UD reason).
+
+ In {,x86-64-}disassem.s many bogus encodings exist - some with ModR/M
+ byte but insufficient displacement bytes, some using SIB encoding with
+ the SIB byte actually being the supposed immediate. Some of these could
+ be expressed by .insn, but I don't want to introduce bogus examples.
+ These will all need adjustment anyway once the disassembler is improved
+ in the way it deals with unrecognized encodings.
+
+ Generally generated code is meant to remain the same. {,x86-64-}nops.d
+ are exceptions because insn prefixes are emitted in a different order.
+ opcode{,-intel,-suffix}.d are also adjusted (along with an according
+ correction to opcode.s) to cover an apparent typo in the original tests
+ (xor when or was meant).
+
+ Where necessary --divide is added as gas option, to allow for the use
+ of the extension opcode functionality.
+
+ Comments are being adjusted where obviously wrong/misleading.
+
+2023-03-31 Jan Beulich <jbeulich@suse.com>
+
+ x86: document .insn
+ ... and mention its introduction in NEWS.
+
+2023-03-31 Jan Beulich <jbeulich@suse.com>
+
+ x86: handle immediate operands for .insn
+ Since we have no insn suffix and it's also not realistic to infer
+ immediate size from the size of other (typically register) operands
+ (like optimize_imm() does), and since we also don't have a template
+ telling us permitted size(s), a new syntax construct is introduced to
+ allow size (and signedness) specification. In the absence of such, the
+ size is inferred from significant bits (which obviously may yield
+ inconsistent results at least for effectively negative values, depending
+ on whether BFD64 is enabled), and only if supplied expressions can be
+ evaluated at parsing time. Being explicit is generally recommended to
+ users.
+
+ Size specification is permitted at bit granularity, but of course the
+ eventually emitted immediate values will be padded up to 8-, 16-, 32-,
+ or 64-bit fields.
+
+2023-03-31 Jan Beulich <jbeulich@suse.com>
+
+ x86: allow for multiple immediates in output_disp()
+ .insn isn't going to have a constraint of only a single immediate when,
+ in particular, RIP-relative addressing is used.
+
+ x86: handle EVEX Disp8 for .insn
+ In particular the scaling factor cannot always be determined from pre-
+ existing operand attributes. Introduce a new {:d<N>} vector operand
+ syntax extension, restricted to .insn only, to allow specifying this in
+ (at least) otherwise ambiguous cases.
+
+2023-03-31 Jan Beulich <jbeulich@suse.com>
+
+ x86: process instruction operands for .insn
+ Deal with register and memory operands; immediate operands will follow
+ later, as will the handling of EVEX embedded broadcast and EVEX Disp8
+ scaling.
+
+ Note that because we can't really know how to encode their use, %cr8 and
+ up cannot be used with .insn outside of 64-bit mode. Users would need to
+ specify an explicit LOCK prefix in combination with %cr0 etc.
+
+2023-03-31 Jan Beulich <jbeulich@suse.com>
+
+ x86: parse special opcode modifiers for .insn
+ So called "short form" encoding is specified by a trailing "+r", whereas
+ a possible extension opcode is specified by the usual "/<digit>". Take
+ these off the expression before handing it to get_absolute_expression().
+
+ Note that on targets where / starts a comment, --divide needs passing to
+ gas in order to make use of the extension opcode functionality.
+
+2023-03-31 Jan Beulich <jbeulich@suse.com>
+
+ x86: parse VEX and alike specifiers for .insn
+ All encoding spaces can be used this way; there's a certain risk that
+ the bits presently reserved could be used for other purposes down the
+ road, but people using .insn are expected to know what they're doing
+ anyway. Plus this way there's at least _some_ way to have those bits
+ set.
+
+ For now this will only allow operand-less insns to be encoded this way.
+
+2023-03-31 Jan Beulich <jbeulich@suse.com>
+
+ x86: introduce .insn directive
+ For starters this deals with only very basic constructs.
+
+ Arm64/ELF: accept relocations against STN_UNDEF
+ While only a secondary issue there, the testcase of PR gas/27212 exposes
+ an oversight in relocation handling: Just like e.g. Arm32, which has a
+ similar comment and a similar check, relocations against STN_UNDEF have
+ to be permitted to satisfy the ELF spec.
+
+2023-03-31 GDB Administrator <gdbadmin@sourceware.org>
+
+ Automatic date update in version.in
+
+2023-03-30 Kevin Buettner <kevinb@redhat.com>
+
+ PR gdb/30219: Clear sync_quit_force_run in quit_force
+ PR 30219 shows an internal error due to a "Bad switch" in
+ print_exception() in gdb/exceptions.c. The switch in question
+ contains cases for RETURN_QUIT and RETURN_ERROR, but is missing a case
+ for the recently added RETURN_FORCED_QUIT. This commit adds that case.
+
+ Making the above change allows the errant test case to pass, but does
+ not fix the underlying problem, which I'll describe shortly. Even
+ though the addition of a case for RETURN_FORCED_QUIT isn't the actual
+ fix, I still think it's important to add this case so that other
+ situations which lead to print_exeption() being called won't generate
+ that "Bad switch" internal error.
+
+ In order to understand the underlying problem, please examine
+ this portion of the backtrace from the bug report:
+
+ 0x5576e4ff5780 print_exception
+ /home/smarchi/src/binutils-gdb/gdb/exceptions.c:100
+ 0x5576e4ff5930 exception_print(ui_file*, gdb_exception const&)
+ /home/smarchi/src/binutils-gdb/gdb/exceptions.c:110
+ 0x5576e6a896dd quit_force(int*, int)
+ /home/smarchi/src/binutils-gdb/gdb/top.c:1849
+
+ The real problem is in quit_force; here's the try/catch which
+ eventually leads to the internal error:
+
+ /* Get out of tfind mode, and kill or detach all inferiors. */
+ try
+ {
+ disconnect_tracing ();
+ for (inferior *inf : all_inferiors ())
+ kill_or_detach (inf, from_tty);
+ }
+ catch (const gdb_exception &ex)
+ {
+ exception_print (gdb_stderr, ex);
+ }
+
+ While running the calls in the try-block, a QUIT check is being
+ performed. This check finds that sync_quit_force_run is (still) set,
+ causing a gdb_exception_forced_quit to be thrown. The exception
+ gdb_exception_forced_quit is derived from gdb_exception, causing
+ exception_print to be called. As shown by the backtrace,
+ print_exception is then called, leading to the internal error.
+
+ The actual fix, also implemented by this commit, is to clear
+ sync_quit_force_run along with the quit flag. This will allow the
+ various cleanup code, called by quit_force, to run without triggering
+ a gdb_exception_forced_quit. (Though, if another SIGTERM is sent to
+ the gdb process, these flags will be set again and a QUIT check in the
+ cleanup code will detect it and throw the exception.)
+
+ Bug: https://sourceware.org/bugzilla/show_bug.cgi?id=30219
+ Approved-By: Simon Marchi <simon.marchi@efficios.com>
+
+2023-03-30 Richard Sandiford <richard.sandiford@arm.com>
+
+ aarch64: Remove stray reglist variable
+ Sorry for not catching this during testing. I was using a
+ host compiler that predated the switch to -fno-common.
+
+2023-03-30 Richard Sandiford <richard.sandiford@arm.com>
+
+ aarch64: Add the RPRFM instruction
+ This patch adds the RPRFM (range prefetch) instruction.
+ It was introduced as part of SME2, but it belongs to the
+ prefetch hint space and so doesn't require any specific
+ ISA flags.
+
+ The aarch64_rprfmop_array initialiser (deliberately) only
+ fills in the leading non-null elements.
+
+2023-03-30 Richard Sandiford <richard.sandiford@arm.com>
+
+ aarch64: Add the SVE FCLAMP instruction
+
+ aarch64: Add new SVE shift instructions
+ This patch adds the new SVE SQRSHRN, SQRSHRUN and UQRSHRN
+ instructions.
+
+ aarch64: Add new SVE saturating conversion instructions
+ This patch adds the SVE SQCVTN, SQCVTUN and UQCVTN instructions,
+ which are available when FEAT_SME2 is implemented.
+
+ aarch64: Add new SVE dot-product instructions
+ This patch adds the SVE FDOT, SDOT and UDOT instructions,
+ which are available when FEAT_SME2 is implemented. The patch
+ also reorders the existing SVE_Zm3_22_INDEX to keep the
+ operands numerically sorted.
+
+ aarch64: Add the SVE BFMLSL instructions
+ This patch adds the SVE BFMLSLB and BFMLSLT instructions,
+ which are available when FEAT_SME2 is implemented.
+
+ aarch64: Add the SME2 UZP and ZIP instructions
+ This patch adds UZP and ZIP, which combine UZP{1,2} and ZIP{1,2}
+ into single instructions.
+
+ aarch64: Add the SME2 UNPK instructions
+ This patch adds SUNPK and UUNPK, which unpack one register's
+ worth of elements to two registers' worth, or two registers'
+ worth to four registers' worth.
+
+2023-03-30 Richard Sandiford <richard.sandiford@arm.com>
+
+ aarch64: Add the SME2 shift instructions
+ There are two instruction formats here:
+
+ - SQRSHR, SQRSHRU and UQRSHR, which operate on lists of two
+ or four registers.
+
+ - SQRSHRN, SQRSHRUN and UQRSHRN, which operate on lists of
+ four registers.
+
+ These are the first SME2 instructions to have immediate operands.
+ The patch makes sure that, when parsing SME2 instructions with
+ immediate operands, the new predicate-as-counter registers are
+ parsed as registers rather than as #-less immediates.
+
+2023-03-30 Richard Sandiford <richard.sandiford@arm.com>
+
+ aarch64: Add the SME2 saturating conversion instructions
+ There are two instruction formats here:
+
+ - SQCVT, SQCVTU and UQCVT, which operate on lists of two or
+ four registers.
+
+ - SQCVTN, SQCVTUN and UQCVTN, which operate on lists of
+ four registers.
+
+2023-03-30 Richard Sandiford <richard.sandiford@arm.com>
+
+ aarch64: Add the SME2 FP<->FP conversion instructions
+ This patch adds the BFCVT{,N} and FCVT{,N} instructions,
+ which narrow a pair of .S registers to a single .H register.
+
+ aarch64: Add the SME2 FP<->int conversion instructions
+ This patch adds the SME2 versions of the FP<->integer conversion
+ instructions FCVT* and *CVTF. It also adds FP rounding instructions
+ FRINT*, which share the same format.
+
+ aarch64: Add the SME2 CLAMP instructions
+ FCLAMP, SCLAMP and UCLAMP share the same format, although FCLAMP
+ doesn't have a .B form.
+
+ aarch64: Add the SME2 MOPA and MOPS instructions
+ [BSU]MOP[AS] share the same format.
+
+2023-03-30 Richard Sandiford <richard.sandiford@arm.com>
+
+ aarch64: Add the SME2 vertical dot-product instructions
+ There are three instruction formats here:
+ - BFVDOT + FVDOT
+ - SVDOT + UVDOT
+ - SUVDOT + USVDOT
+
+ There are also 64-bit forms of SVDOT and UVDOT.
+
+2023-03-30 Richard Sandiford <richard.sandiford@arm.com>
+
+ aarch64: Add the SME2 dot-product instructions
+ BFDOT, FDOT and USDOT share the same instruction format.
+ SDOT and UDOT share a different format. SUDOT does not
+ have the multi vector x multi vector forms, since they
+ would be redundant with USDOT.
+
+ aarch64: Add the SME2 MLALL and MLSLL instructions
+ SMLALL, SMLSLL, UMLALL and UMLSLL have the same format.
+ USMLALL and SUMLALL allow the same operand types as those
+ instructions, except that SUMLALL does not have the multi-vector
+ x multi-vector forms (which would be redundant with USMLALL).
+
+ aarch64: Add the SME2 MLAL and MLSL instructions
+ The {BF,F,S,U}MLAL and {BF,F,S,U}MLSL instructions share the same
+ encoding. They are the first instance of a ZA (as opposed to ZA tile)
+ operand having a range of offsets. As with ZA tiles, the expected
+ range size is encoded in the operand-specific data field.
+
+ aarch64: Add the SME2 FMLA and FMLS instructions
+
+ aarch64: Add the SME2 maximum/minimum instructions
+ This patch adds the SME2 multi-register forms of F{MAX,MIN}{,NM}
+ and {S,U}{MAX,MIN}. SQDMULH, SRSHL and URSHL have the same form
+ as SMAX etc., so the patch adds them too.
+
+2023-03-30 Richard Sandiford <richard.sandiford@arm.com>
+
+ aarch64: Add the SME2 ADD and SUB instructions
+ Add support for the SME2 ADD. SUB, FADD and FSUB instructions.
+ SUB and FSUB have the same form as ADD and FADD, except that
+ ADD also has a 2-operand accumulating form.
+
+ The 64-bit ADD/SUB instructions require FEAT_SME_I16I64 and the
+ 64-bit FADD/FSUB instructions require FEAT_SME_F64F64.
+
+ These are the first instructions to have tied register list
+ operands, as opposed to tied single registers.
+
+ The parse_operands change prevents unsuffixed Z registers (width==-1)
+ from being treated as though they had an Advanced SIMD-style suffix
+ (.4s etc.). It means that:
+
+ Error: expected element type rather than vector type at operand 2 -- `add za\.s\[w8,0\],{z0-z1}'
+
+ becomes:
+
+ Error: missing type suffix at operand 2 -- `add za\.s\[w8,0\],{z0-z1}'
+
+2023-03-30 Richard Sandiford <richard.sandiford@arm.com>
+
+ aarch64: Add the SME2 ZT0 instructions
+ SME2 adds lookup table instructions for quantisation. They use
+ a new lookup table register called ZT0.
+
+ LUTI2 takes an unsuffixed SVE vector index of the form Zn[<imm>],
+ which is the first time that this syntax has been used.
+
+2023-03-30 Richard Sandiford <richard.sandiford@arm.com>
+
+ aarch64: Add the SME2 predicate-related instructions
+ Implementation-wise, the main things to note here are:
+
+ - the WHILE* instructions have forms that return a pair of predicate
+ registers. This is the first time that we've had lists of predicate
+ registers, and they wrap around after register 15 rather than after
+ register 31.
+
+ - the predicate-as-counter WHILE* instructions have a fourth operand
+ that specifies the vector length. We can treat this as an enumeration,
+ except that immediate values aren't allowed.
+
+ - PEXT takes an unsuffixed predicate index of the form PN<n>[<imm>].
+ This is the first instance of a vector/predicate index having
+ no suffix.
+
+2023-03-30 Richard Sandiford <richard.sandiford@arm.com>
+
+ aarch64: Add the SME2 multivector LD1 and ST1 instructions
+ SME2 adds LD1 and ST1 variants for lists of 2 and 4 registers.
+ The registers can be consecutive or strided. In the strided case,
+ 2-register lists have a stride of 8, starting at register x0xxx.
+ 4-register lists have a stride of 4, starting at register x00xx.
+
+ The instructions are predicated on a predicate-as-counter register in
+ the range pn8-pn15. Although we already had register fields with upper
+ bounds of 7 and 15, this is the first plain register operand to have a
+ nonzero lower bound. The patch uses the operand-specific data field
+ to record the minimum value, rather than having separate inserters
+ and extractors for each lower bound. This in turn required adding
+ an extra bit to the field.
+
+2023-03-30 Richard Sandiford <richard.sandiford@arm.com>
+
+ aarch64: Add the SME2 MOVA instructions
+ SME2 defines new MOVA instructions for moving multiple registers
+ to and from ZA. As with SME, the instructions are also available
+ through MOV aliases.
+
+ One notable feature of these instructions (and many other SME2
+ instructions) is that some register lists must start at a multiple
+ of the list's size. The patch uses the general error "start register
+ out of range" when this constraint isn't met, rather than an error
+ specifically about multiples. This ensures that the error is
+ consistent between these simple consecutive lists and later
+ strided lists, for which the requirements aren't a simple multiple.
+
+2023-03-30 Richard Sandiford <richard.sandiford@arm.com>
+
+ aarch64: Add support for predicate-as-counter registers
+ SME2 adds a new format for the existing SVE predicate registers:
+ predicates as counters rather than predicates as masks. In assembly
+ code, operands that interpret predicates as counters are written
+ pn<N> rather than p<N>.
+
+ This patch adds support for these registers and extends some
+ existing instructions to support them. Since the new forms
+ are just a programmer convenience, there's no need to make them
+ more restrictive than the earlier predicate-as-mask forms.
+
+2023-03-30 Richard Sandiford <richard.sandiford@arm.com>
+
+ aarch64; Add support for vector offset ranges
+ Some SME2 instructions operate on a range of consecutive ZA vectors.
+ This is indicated by syntax such as:
+
+ za[<Wv>, <imml>:<immh>]
+
+ Like with the earlier vgx2 and vgx4 support, we get better error
+ messages if the parser allows all ZA indices to have a range.
+ We can then reject invalid cases during constraint checking.
+
+2023-03-30 Richard Sandiford <richard.sandiford@arm.com>
+
+ aarch64: Add support for vgx2 and vgx4
+ Many SME2 instructions operate on groups of 2 or 4 ZA vectors.
+ This is indicated by adding a "vgx2" or "vgx4" group size to the
+ ZA index. The group size is optional in assembly but preferred
+ for disassembly.
+
+ There is not a binary distinction between mnemonics that have
+ group sizes and mnemonics that don't, nor between mnemonics that
+ take vgx2 and mnemonics that take vgx4. We therefore get better
+ error messages if we allow any ZA index to have a group size
+ during parsing, and wait until constraint checking to reject
+ invalid sizes.
+
+ A quirk of the way errors are reported means that if an instruction
+ is wrong both in its qualifiers and its use of a group size, we'll
+ print suggested alternative instructions that also have an incorrect
+ group size. But that's a general property that also applies to
+ things like out-of-range immediates. It's also not obviously the
+ wrong thing to do. We need to be relatively confident that we're
+ looking at the right opcode before reporting detailed operand-specific
+ errors, so doing qualifier checking first seems resonable.
+
+2023-03-30 Richard Sandiford <richard.sandiford@arm.com>
+
+ aarch64: Add _off4 suffix to AARCH64_OPND_SME_ZA_array
+ SME2 adds various new fields that are similar to
+ AARCH64_OPND_SME_ZA_array, but are distinguished by the size of
+ their offset fields. This patch adds _off4 to the name of the
+ field that we already have.
+
+ aarch64: Add a _10 suffix to FLD_imm3
+ SME2 adds various new 3-bit immediate fields, so this patch adds
+ an lsb position suffix to the name of the field that we already have.
+
+ aarch64: Add +sme2
+ This patch adds bare-bones support for +sme2. Later patches
+ fill in the rest.
+
+2023-03-30 Richard Sandiford <richard.sandiford@arm.com>
+
+ aarch64: Prefer register ranges & support wrapping
+ Until now, binutils has supported register ranges such
+ as { v0.4s - v3.4s } as an unofficial shorthand for
+ { v0.4s, v1.4s, v2.4s, v3.4s }. The SME2 ISA embraces this form
+ and makes it the preferred disassembly. It also embraces wrapped
+ lists such as { z31.s - z2.s }, which is something that binutils
+ didn't previously allow.
+
+ The range form was already binutils's preferred disassembly for 3- and
+ 4-register lists. This patch prefers it for 2-register lists too.
+ The patch also adds support for wrap-around.
+
+2023-03-30 Richard Sandiford <richard.sandiford@arm.com>
+
+ aarch64: Add support for strided register lists
+ SME2 has instructions that accept strided register lists,
+ such as { z0.s, z4.s, z8.s, z12.s }. The purpose of this
+ patch is to extend binutils to support such lists.
+
+ The parsing code already had (unused) support for strides of 2.
+ The idea here is instead to accept all strides during parsing
+ and reject invalid strides during constraint checking.
+
+ The SME2 instructions that accept strided operands also have
+ non-strided forms. The errors about invalid strides therefore
+ take a bitmask of acceptable strides, which allows multiple
+ possibilities to be summed up in a single message.
+
+ I've tried to update all code that handles register lists.
+
+2023-03-30 Richard Sandiford <richard.sandiford@arm.com>
+
+ aarch64: Sort fields alphanumerically
+ This patch just sorts the field enum alphanumerically, which makes
+ it easier to see if a particular field has already been defined.
+
+ aarch64: Resync field names
+ This patch just makes the comments in aarch64-opc.c:fields match
+ the names of the associated FLD_* enum.
+
+2023-03-30 Richard Sandiford <richard.sandiford@arm.com>
+
+ aarch64: Regularise FLD_* suffixes
+ Some FLD_imm* suffixes used a counting scheme such as FLD_immN,
+ FLD_immN_2, FLD_immN_3, etc., while others used the lsb as the
+ suffix. The latter seems more mnemonic, and was a big help
+ in doing the SME2 work.
+
+ Similarly, the _10 suffix on FLD_SME_size_10 was nonobvious.
+ Presumably it indicated a 2-bit field, but it actually starts
+ in bit 22.
+
+2023-03-30 Richard Sandiford <richard.sandiford@arm.com>
+
+ aarch64: Rename some of GAS's REG_TYPE_* macros
+ In GAS, the vector and predicate registers are identified by
+ REG_TYPE_VN, REG_TYPE_ZN and REG_TYPE_PN. This "N" is obviously
+ a placeholder for the register number. However, we don't use that
+ convention for integer and FP registers, and (more importantly)
+ SME2 adds "predicate-as-counter" registers that are denoted PN.
+
+ This patch therefore drops the "N" suffix from the existing
+ registers. The main hitch is that Z was also used for the
+ zero register in things like R_Z, but using ZR seems more
+ consistent with the SP-based names.
+
+2023-03-30 Richard Sandiford <richard.sandiford@arm.com>
+
+ aarch64: Add a aarch64_cpu_supports_inst_p helper
+ Quite a lot of SME2 instructions have an opcode bit that selects
+ between 32-bit and 64-bit forms of an instruction, with the 32-bit
+ forms being part of base SME2 and with the 64-bit forms being part
+ of an optional extension. It's nevertheless useful to have a single
+ opcode entry for both forms since (a) that matches the ISA definition
+ and (b) it tends to improve error reporting.
+
+ This patch therefore adds a libopcodes function called
+ aarch64_cpu_supports_inst_p that tests whether the target
+ supports a particular instruction. In future it will depend
+ on internal libopcodes routines.
+
+2023-03-30 Richard Sandiford <richard.sandiford@arm.com>
+
+ aarch64: Reorder some OP_SVE_* macros
+ This patch just moves some out-of-order-looking OP_SVE_* macros.
+
+ aarch64: Rename aarch64-tbl.h OP_SME_* macros
+ This patch renames the OP_SME_* macros in aarch64-tbl.h so that
+ they follow the same scheme as the OP_SVE_* ones. It also uses
+ OP_SVE_ as the prefix, since there is no real distinction between
+ the SVE and SME uses of qualifiers: a macro defined for one can
+ be useful for the other too.
+
+2023-03-30 Richard Sandiford <richard.sandiford@arm.com>
+
+ aarch64: Tweak priorities of parsing-related errors
+ There are three main kinds of error reported during parsing,
+ in increasing order of priority:
+
+ - AARCH64_OPDE_RECOVERABLE (register seen instead of immediate)
+ - AARCH64_OPDE_SYNTAX_ERROR
+ - AARCH64_OPDE_FATAL_SYNTAX_ERROR
+
+ This priority makes sense when comparing errors reported against the
+ same operand. But if we get to operand 3 (say) and see a register
+ instead of an immediate, that's likely to be a better match than
+ something that fails with a syntax error at operand 1.
+
+ The idea of this patch is to prioritise parsing-related errors
+ based on operand index first, then by error code. Post-parsing
+ errors still win over parsing errors, and their relative priorities
+ don't change.
+
+2023-03-30 Richard Sandiford <richard.sandiford@arm.com>
+
+ aarch64: Try to report invalid variants against the closest match
+ If an instruction has invalid qualifiers, GAS would report the
+ error against the final opcode entry that got to the qualifier-
+ checking stage. It seems better to report the error against
+ the opcode entry that had the closest match, just like we
+ pick the closest match within an opcode entry for the
+ "did you mean this?" message.
+
+ This patch adds the number of invalid operands as an
+ argument to AARCH64_OPDE_INVALID_VARIANT and then picks the
+ AARCH64_OPDE_INVALID_VARIANT with the lowest argument.
+
+2023-03-30 Richard Sandiford <richard.sandiford@arm.com>
+
+ aarch64: Tweak register list errors
+ The error for invalid register lists had the form:
+
+ invalid number of registers in the list; N registers are expected at operand M -- `insn'
+
+ This seems a bit verbose. Also, the "bracketing" is really:
+
+ (invalid number of registers in the list; N registers are expected) at operand M
+
+ but the semicolon works against that.
+
+ This patch goes for slightly shorter messages, setting a template
+ that later patches can use for more complex cases.
+
+2023-03-30 Richard Sandiford <richard.sandiford@arm.com>
+
+ aarch64: Make AARCH64_OPDE_REG_LIST take a bitfield
+ AARCH64_OPDE_REG_LIST took a single operand that specified the
+ expected number of registers. However, there are quite a few
+ SME2 instructions that have both 2-register forms and (separate)
+ 4-register forms. If the user tries to use a 3-register list,
+ it isn't obvious which opcode entry they meant. Saying that we
+ expect 2 registers and saying that we expect 4 registers would
+ both be wrong.
+
+ This patch therefore switches the operand to a bitfield. If a
+ AARCH64_OPDE_REG_LIST is reported against multiple opcode entries,
+ the patch ORs up the expected lengths.
+
+ This has no user-visible effect yet. A later patch adds more error
+ strings, alongside tests that use them.
+
+2023-03-30 Richard Sandiford <richard.sandiford@arm.com>
+
+ aarch64: Add an operand class for SVE register lists
+ SVE register lists were classified as SVE_REG, since there had been
+ no particular reason to separate them out. However, some SME2
+ instructions have tied register list operands, and so we need to
+ distinguish registers and register lists when checking whether two
+ operands match.
+
+ Also, the register list operands used a general error message,
+ even though we already have a dedicated error code for register
+ lists that are the wrong length.
+
+2023-03-30 Richard Sandiford <richard.sandiford@arm.com>
+
+ aarch64: Commonise checks for index operands
+ This patch splits out the constraint checking for index operands,
+ so that it can be reused by new SME2 operands.
+
+ aarch64: Add an error code for out-of-range registers
+ libopcodes currently reports out-of-range registers as a general
+ AARCH64_OPDE_OTHER_ERROR. However, this means that each register
+ range needs its own hard-coded string, which is a bit cumbersome
+ if the range is determined programmatically. This patch therefore
+ adds a dedicated error type for out-of-range errors.
+
+2023-03-30 Richard Sandiford <richard.sandiford@arm.com>
+
+ aarch64: Deprioritise AARCH64_OPDE_REG_LIST
+ SME2 has many instructions that take a list of SVE registers.
+ There are often multiple forms, with different forms taking
+ different numbers of registers.
+
+ This means that if, after a successful parse and qualifier match,
+ we find that the number of registers does not match the opcode entry,
+ the associated error should have a lower priority/severity than other
+ errors reported at the same stage. For example, if there are 2-register
+ and 4-register forms of an instruction, and if the assembly code uses
+ the 2-register form with an out-of-range value, the out-of-range value
+ error against the 2-register instruction should have a higher priority
+ than the "wrong number of registers" error against the 4-register
+ instruction.
+
+ This is tested by the main SME2 patches, but seemed worth splitting out.
+
+2023-03-30 Richard Sandiford <richard.sandiford@arm.com>
+
+ aarch64: Update operand_mismatch_kind_names
+ The contents of operand_mismatch_kind_names were out of sync
+ with the enum.
+
+2023-03-30 Richard Sandiford <richard.sandiford@arm.com>
+
+ aarch64: Rework reporting of failed register checks
+ There are many opcode table entries that share the same mnemonic.
+ Trying to parse an invalid assembly line will trigger an error for
+ each of these entries, but the specific error might vary from one
+ entry to another, depending on the exact nature of the problem.
+
+ GAS has quite an elaborate system for picking the most appropriate
+ error out of all the failed matches. And in many cases it works well.
+ However, one of the limitations is that the error is always reported
+ against a single opcode table entry. If that table entry isn't the
+ one that the user intended to use, then the error can end up being
+ overly specific.
+
+ This is particularly true if an instruction has a typoed register
+ name, or uses a type of register that is not accepted by any
+ opcode table entry. For example, one of the expected error
+ matches for an attempted SVE2 instruction is:
+
+ Error: operand 1 must be a SIMD scalar register -- `addp z32\.s,p0/m,z32\.s,z0\.s'
+
+ even though the hypothetical user was presumably attempting to use
+ the SVE form of ADDP rather than the Advanced SIMD one. There are
+ many other instances of this in the testsuite.
+
+ The problem becomes especially acute with SME2, since many SME2
+ instructions reuse existing mnemonics. This could lead to us
+ reporting an SME-related error against a non-SME instruction,
+ or a non-SME-related error against an SME instruction.
+
+ This patch tries to improve things by collecting together all
+ the register types that an opcode table entry expected for a
+ given operand. It also records what kind of register was
+ actually seen, if any. It then tries to summarise all this
+ in a more directed way, falling back to a generic error if
+ the combination defies a neat summary.
+
+ The patch includes tests for all new messages except REG_TYPE_ZA,
+ which only triggers with SME2.
+
+ To test this, I created an assembly file that contained the cross
+ product of all known mnemonics and one example from each register
+ class. I then looked for cases where the new routines fell back on the
+ generic errors ("expected a register" or "unexpected register type").
+ I locally added dummy messages for each one until there were no
+ more hits. The patch adds a specimen instruction to diagnostics.s
+ for each of these combinations. In each case, the combination didn't
+ seem like something that could be summarised in a natural way, so the
+ generic messages seemed better. There's always going to be an element
+ of personal taste around this kind of thing though.
+
+ Adding more register types made 1<<REG_TYPE_MAX exceed the range
+ of the type, but we don't actually need/want 1<<REG_TYPE_MAX.
+
+2023-03-30 Richard Sandiford <richard.sandiford@arm.com>
+
+ aarch64: Try to avoid inappropriate default errors
+ After parsing a '{' and the first register, parse_typed_reg would
+ report errors in subsequent registers in the same way as for the
+ first register. It used set_default_error, which reports errors
+ of the form "operand N must be X".
+
+ The problem is that if there are multiple opcode entries for the
+ same mnemonic, there could be several matches that lead to a
+ default error. There's no guarantee that the default error for
+ the register list is the one that will be chosen.
+
+ To take an example from the testsuite:
+
+ ext z0.b,{z31.b,z32.b},#0
+
+ gave:
+
+ operand 2 must be an SVE vector register
+
+ with the error being reported against the single-vector version
+ of ext, even though the operand is clearly a list.
+
+ This patch uses set_fatal_syntax_error to bump the priority of the
+ error once we're sure that the operand is a list of the right type.
+
+2023-03-30 Richard Sandiford <richard.sandiford@arm.com>
+
+ aarch64: Improve errors for malformed register lists
+ parse_typed_reg is used for parsing both bare registers and
+ registers that occur in lists. If it doesn't see a register,
+ or sees an unexpected kind of register, it queues a default
+ error to report the problem. These default errors have the form
+ "operand N must be an X", where X comes from the operand table.
+
+ If there are multiple opcode entries that report default errors,
+ GAS tries to pick the most appropriate one, using the opcode
+ table order as a tiebreaker. But this can lead to cases where
+ a syntax error in a register list is reported against an opcode
+ that doesn't accept register lists. For example, the unlikely
+ error:
+
+ ext z0.b,{,},#0
+
+ is reported as:
+
+ operand 2 must be an SVE vector register -- `ext z0.b,{,},#0'
+
+ even though operand 2 can be a register list.
+
+ If we've parsed the opening '{' of a register list, and then see
+ something that isn't remotely register-like, it seems better to
+ report that directly as a syntax error, rather than rely on the
+ default error. The operand won't be a valid list of anything,
+ so there's no need to pick a specific Y in "operand N must be
+ a list of Y".
+
+2023-03-30 Richard Sandiford <richard.sandiford@arm.com>
+
+ aarch64: Tweak parsing of integer & FP registers
+ Integer registers were parsed indirectly through
+ aarch64_reg_parse_32_64 (and thus aarch64_addr_reg_parse) rather
+ than directly through parse_reg. This was because we need the
+ qualifier associated with the register, and the logic to calculate
+ that was buried in aarch64_addr_reg_parse.
+
+ The code that parses FP registers had the same need, but it
+ open-coded the calculation of the qualifier.
+
+ This patch tries to handle both cases in the same way. It is
+ needed by a later patch that tries to improve the register-related
+ diagnostics.
+
+2023-03-30 Richard Sandiford <richard.sandiford@arm.com>
+
+ aarch64: Tweak errors for base & offset registers
+ parse_address_main currently uses get_reg_expected_msg to
+ report invalid base and offset registers, but the disadvantage
+ of doing that is that it isn't immediately clear which register
+ is wrong (the base or the offset).
+
+ A later patch moves away from using get_reg_expected_msg for failed
+ type checks, but doing that here didn't seem like the best approach.
+ The patch tries to use more tailored messages instead.
+
+2023-03-30 Richard Sandiford <richard.sandiford@arm.com>
+
+ aarch64: Tweak error for missing immediate offset
+ This patch tweaks the error message that is printed when
+ a ZA-style index is missing the immediate offset.
+
+2023-03-30 Richard Sandiford <richard.sandiford@arm.com>
+
+ aarch64: Move w12-w15 range check to libopcodes
+ In SME, the vector select register had to be in the range
+ w12-w15, so it made sense to enforce that during parsing.
+ However, SME2 adds instructions for which the range is
+ w8-w11 instead.
+
+ This patch therefore moves the range check from the parsing
+ stage to the constraint-checking stage.
+
+ Also, the previous error used a capitalised range W12-W15,
+ whereas other register range errors used lowercase ranges
+ like p0-p7. A quick internal poll showed a preference for
+ the lowercase form, so the patch uses that.
+
+ The patch uses "selection register" rather than "vector
+ select register" so that the terminology extends more
+ naturally to PSEL.
+
+2023-03-30 Richard Sandiford <richard.sandiford@arm.com>
+
+ aarch64: Commonise index parsing
+ Just a minor clean-up to factor out the index parsing, partly to
+ ensure that the error handling remains consistent. No behavioural
+ change intended.
+
+2023-03-30 Richard Sandiford <richard.sandiford@arm.com>
+
+ aarch64: Consolidate ZA slice parsing
+ Now that parse_typed_reg checks the range of tile register numbers
+ and libopcodes checks the range of vector select offsets, there's
+ very little difference between the parsing of ZA tile indices,
+ ZA array indices, and PSEL indices. The main one is that ZA
+ array indices don't currently allow "za" to be qualified,
+ but we need to remove that restriction for SME2.
+
+ This patch therefore consolidates all three parsers into a single
+ routine, parameterised by the type of register that they expect.
+
+2023-03-30 Richard Sandiford <richard.sandiford@arm.com>
+
+ aarch64: Move ZA range checks to aarch64-opc.c
+ This patch moves the range checks on ZA vector select offsets from
+ gas to libopcodes. Doing the checks there means that the error
+ messages contain the expected range. It also fits in better
+ with the error severity scheme, which becomes important later.
+ (This is because out-of-range indices are treated as more severe than
+ syntax errors, on the basis that parsing must have succeeded if we get
+ to the point of checking the completed opcode.)
+
+ The patch also adds a new check_za_access function for checking
+ ZA accesses. That's a bit over the top for one offset check, but the
+ function becomes more complex with later patches.
+
+ sme-9-illegal.s checked for an invalid .q suffix using:
+
+ psel p1, p15, p3.q[w15]
+
+ but this is doubly invalid because it misses the immediate part
+ of the index. The patch keeps that test but adds another with
+ a zero index, so that .q is the only thing wrong.
+
+ The aarch64-tbl.h change includes neatening up the backslash
+ positions.
+
+2023-03-30 Richard Sandiford <richard.sandiford@arm.com>
+
+ aarch64: Pass aarch64_indexed_za to parsers
+ ZA indices have more parts than most operands, so passing these
+ parts around individually is more awkward than for other operand
+ types. Things aren't too bad at the moment, but SME2 adds two
+ further pieces: an offset range and a vector group size.
+
+ This patch therefore replaces arguments for the individual pieces
+ with a single argument for the index as a whole.
+
+2023-03-30 Richard Sandiford <richard.sandiford@arm.com>
+
+ aarch64: Make indexed_za use 64-bit immediates
+ A later patch moves the range checking for ZA vector select
+ offsets from gas to libopcodes. That in turn requires the
+ immediate field to be big enough to support all parsed values.
+
+ This shouldn't be a particularly size-sensitive structure,
+ so there should be no memory problems with doing this.
+
+2023-03-30 Richard Sandiford <richard.sandiford@arm.com>
+
+ aarch64: Rename za_tile_vector to za_index
+ za_tile_vector is also used for indexing ZA as a whole, rather than
+ just for indexing tiles. The former is more common than the latter
+ in SME2, so this patch generalises the name to "indexed_za".
+
+ The patch also names the associated structure, so that later patches
+ can reuse it during parsing.
+
+2023-03-30 Richard Sandiford <richard.sandiford@arm.com>
+
+ aarch64: Treat ZA as a register
+ We already treat the ZA tiles ZA0-ZA15 as registers. This patch
+ does the same for ZA itself. parse_sme_zero_mask can then parse
+ ZA tiles and ZA in the same way, through parsed_type_reg.
+
+ One important effect of going through parsed_type_reg (in general)
+ is that it allows ZA to take qualifiers. This is necessary for many
+ SME2 instructions.
+
+ However, to support existing unqualified uses of ZA, parse_reg_with_qual
+ needs to treat the qualiier as optional. Hopefully the net effect is
+ to give better error messages, since now that SME2 makes "za.<T>"
+ valid in some contexts, it might be natural to use it (incorrectly)
+ in ZERO too.
+
+ While there, the patch also tweaks the error messages for invalid
+ ZA tiles, to try to make some cases more specific.
+
+ For now, parse_sme_za_array just uses parse_reg, rather than
+ parse_typed_reg/parse_reg_with_qual. A later patch consolidates
+ the parsing further.
+
+2023-03-30 Richard Sandiford <richard.sandiford@arm.com>
+
+ aarch64: Consolidate ZA tile range checks
+ Now that all parsing of ZA tile names goes through parse_typed_reg,
+ we can check there for out-of-range tile numbers. The other check
+ performed by parse_sme_zada_operand was to reject .q, but that can
+ now be done via F_STRICT instead. (.q tiles are valid in other
+ contexts, so they shouldn't be rejected in parse_typed_reg.)
+
+ aarch64: Reuse parse_typed_reg for ZA tiles
+ This patch reuses the general parse_typed_reg for ZA tiles.
+ This involves adding a way of suppressing the usual treatment
+ of register indices, since ZA indices look very different from
+ Advanced SIMD and SVE vector indices.
+
+2023-03-30 Richard Sandiford <richard.sandiford@arm.com>
+
+ aarch64: Rework parse_typed_reg interface
+ parse_typed_reg returned a register number and passed the
+ register type back using a pointer parameter. It seems simpler
+ to return the register entry instead, since that has both pieces
+ of information in one place.
+
+ The patch also replaces the boolean in_reg_list parameter with
+ a mask of flags. This hopefully makes calls easier to read
+ (more self-documenting than "true" or "false"), but more
+ importantly, it allows a later patch to add a second flag.
+
+2023-03-30 Richard Sandiford <richard.sandiford@arm.com>
+
+ aarch64: Move vectype_to_qualifier further up
+ This patch just moves vectype_to_qualifier further up, so that
+ a later patch can call it at an earlier point in the file.
+ No behavioural change intended.
+
+ aarch64: Add REG_TYPE_ZATHV
+ This patch adds a multi-register type that includes both REG_TYPE_ZATH
+ and REG_TYPE_ZATV. This slightly simplifies the existing code, but the
+ main purpose is to enable later patches.
+
+2023-03-30 Richard Sandiford <richard.sandiford@arm.com>
+
+ aarch64: Rename REG_TYPE_ZA* to REG_TYPE_ZAT*
+ The ZA tile registers were called REG_TYPE_ZA, REG_TYPE_ZAH and
+ REG_TYPE_ZAV. However, a later patch wants to make plain "za"
+ a register type too, and REG_TYPE_ZA is the obvious name for that.
+
+ This patch therefore adds "T" (tile) to the existing names.
+
+2023-03-30 Richard Sandiford <richard.sandiford@arm.com>
+
+ aarch64: Use aarch64_operand_error more widely
+ GAS's aarch64_instruction had its own cut-down error record,
+ but it's better for later patches if it reuses the binutils-wide
+ aarch64_operand_error instead. The main difference is that
+ aarch64_operand_error can store arguments to the error while
+ aarch64_instruction couldn't.
+
+2023-03-30 Richard Sandiford <richard.sandiford@arm.com>
+
+ aarch64: Make SME instructions use F_STRICT
+ This patch makes all SME instructions use F_STRICT, so that qualifiers
+ have to be provided explicitly rather than being inferred from other
+ operands. The main change is to move the qualifier setting from the
+ operand-level decoders to the opcode level.
+
+ This is one step towards consolidating the ZA parsing code and
+ extending it to handle SME2.
+
+2023-03-30 Richard Sandiford <richard.sandiford@arm.com>
+
+ aarch64: Fix SVE2 register/immediate distinction
+ GAS refuses to interpret register names like x0 as unadorned
+ immediates, due to the obvious potential for confusion with
+ register operands. (An explicit #x0 is OK.)
+
+ For compatibility reasons, we can't extend the set of registers
+ that GAS rejects for existing instructions. For example:
+
+ mov x0, z0
+
+ was valid code before SVE was added, so it needs to stay valid
+ code even when SVE is enabled. But we can make GAS reject newer
+ registers in newer instructions. The SVE instruction:
+
+ and z0.s, z0.s, z0.h
+
+ is therefore invalid, rather than z0.h being an immediate.
+
+ This patch extends the SVE behaviour to SVE2. The old call
+ to AARCH64_CPU_HAS_FEATURE was technically the wrong way around,
+ although it didn't matter in practice for base SVE instructions
+ since their avariants only set SVE.
+
+2023-03-30 Richard Sandiford <richard.sandiford@arm.com>
+
+ aarch64: Restrict range of PRFM opcodes
+ In the register-index forms of PRFM, the unallocated prefetch opcodes
+ 24-31 have been reused for the encoding of the new RPRFM instruction.
+ The PRFM opcode space is now capped at 23 for these forms. The other
+ forms of PRFM are unaffected.
+
+ aarch64: Fix PSEL opcode mask
+ The opcode mask for PSEL was missing some bits, which meant
+ that some upcoming SME2 opcodes would be misinterpreted as PSELs.
+
+ aarch64: Add sme-i16i64 and sme-f64f64 aliases
+ Most extension flags are named after the associated architectural
+ FEAT_* flags, but sme-i64 and sme-f64 were exceptions. This patch
+ adds sme-i16i64 and sme-f64f64 aliases, but keeps the old names too
+ for compatibility.
+
+2023-03-30 Nick Clifton <nickc@redhat.com>
+
+ Fix an illegal memory access triggered by parsing corrupt DWARF info.
+ PR 30284
+ * dwarf.c (read_and_display_attr_value): Detect and ignore negative base values.
+
+2023-03-30 Andrew Burgess <aburgess@redhat.com>
+
+ gdb/python: Add new gdb.unwinder.FrameId class
+ When writing an unwinder it is necessary to create a new class to act
+ as a frame-id. This new class is almost certainly just going to set a
+ 'sp' and 'pc' attribute within the instance.
+
+ This commit adds a little helper class gdb.unwinder.FrameId that does
+ this job. Users can make use of this to avoid having to write out
+ standard boilerplate code any time they write an unwinder.
+
+ Of course, if the user wants their FrameId class to be more
+ complicated in some way, then they can still write their own class,
+ just like they could before.
+
+ I've simplified the example code in the documentation to now use the
+ new helper class, and I've also made use of this helper within the
+ testsuite.
+
+ Any existing user code will continue to work just as it did before
+ after this change.
+
+ Reviewed-By: Eli Zaretskii <eliz@gnu.org>
+ Reviewed-By: Tom Tromey <tom@tromey.com>
+
+2023-03-30 Andrew Burgess <aburgess@redhat.com>
+
+ gdb/python: Allow gdb.UnwindInfo to be created with non gdb.Value args
+ Currently when creating a gdb.UnwindInfo object a user must call
+ gdb.PendingFrame.create_unwind_info and pass a frame-id object.
+
+ The frame-id object should have at least a 'sp' attribute, and
+ probably a 'pc' attribute too (it can also, in some cases have a
+ 'special' attribute).
+
+ Currently all of these frame-id attributes need to be gdb.Value
+ objects, but the only reason for that requirement is that we have some
+ code in py-unwind.c that only handles gdb.Value objects.
+
+ If instead we switch to using get_addr_from_python in py-utils.c then
+ we will support both gdb.Value objects and also raw numbers, which
+ might make things simpler in some cases.
+
+ So, I started rewriting pyuw_object_attribute_to_pointer (in
+ py-unwind.c) to use get_addr_from_python. However, while looking at
+ the code I noticed a problem.
+
+ The pyuw_object_attribute_to_pointer function returns a boolean flag,
+ if everything goes OK we return true, but we return false in two
+ cases, (1) when the attribute is not present, which might be
+ acceptable, or might be an error, and (2) when we get an error trying
+ to extract the attribute value, in which case a Python error will have
+ been set.
+
+ Now in pending_framepy_create_unwind_info we have this code:
+
+ if (!pyuw_object_attribute_to_pointer (pyo_frame_id, "sp", &sp))
+ {
+ PyErr_SetString (PyExc_ValueError,
+ _("frame_id should have 'sp' attribute."));
+ return NULL;
+ }
+
+ Notice how we always set an error. This will override any error that
+ is already set.
+
+ So, if you create a frame-id object that has an 'sp' attribute, but
+ the attribute is not a gdb.Value, then currently we fail to extract
+ the attribute value (it's not a gdb.Value) and set this error in
+ pyuw_object_attribute_to_pointer:
+
+ rc = pyuw_value_obj_to_pointer (pyo_value.get (), addr);
+ if (!rc)
+ PyErr_Format (
+ PyExc_ValueError,
+ _("The value of the '%s' attribute is not a pointer."),
+ attr_name);
+
+ Then we return to pending_framepy_create_unwind_info and immediately
+ override this error with the error about 'sp' being missing.
+
+ This all feels very confused.
+
+ Here's my proposed solution: pyuw_object_attribute_to_pointer will now
+ return a tri-state enum, with states OK, MISSING, or ERROR. The
+ meanings of these states are:
+
+ OK - Attribute exists and was extracted fine,
+
+ MISSING - Attribute doesn't exist, no Python error was set.
+
+ ERROR - Attribute does exist, but there was an error while
+ extracting it, a Python error was set.
+
+ We need to update pending_framepy_create_unwind_info, the only user of
+ pyuw_object_attribute_to_pointer, but now I think things are much
+ clearer. Errors from lower levels are not blindly overridden with the
+ generic meaningless error message, but we still get the "missing 'sp'
+ attribute" error when appropriate.
+
+ This change also includes the switch to get_addr_from_python which was
+ what started this whole journey.
+
+ For well behaving user code there should be no visible changes after
+ this commit.
+
+ For user code that hits an error, hopefully the new errors should be
+ more helpful in figuring out what's gone wrong.
+
+ Additionally, users can now use integers for the 'sp' and 'pc'
+ attributes in their frame-id objects if that is useful.
+
+ Reviewed-By: Tom Tromey <tom@tromey.com>
+
+2023-03-30 Andrew Burgess <aburgess@redhat.com>
+
+ gdb: have value_as_address call unpack_pointer
+ While refactoring some other code in gdb/python/* I wanted to merge
+ two code paths. One path calls value_as_address, while the other
+ calls unpack_pointer.
+
+ I suspect calling value_as_address is the correct choice, but, while
+ examining the code I noticed that value_as_address calls unpack_long
+ rather than unpack_pointer.
+
+ Under the hood, unpack_pointer does just call unpack_long so there's
+ no real difference here, but it feels like value_as_address should
+ call unpack_pointer.
+
+ I've updated the code to use unpack_pointer, and changed a related
+ comment to say that we call unpack_pointer. I've also adjusted the
+ header comment on value_as_address. The existing header refers to
+ some code that is now commented out.
+
+ Rather than trying to describe the whole algorithm of
+ value_as_address, which is already well commented within the function,
+ I've just trimmed the comment on value_as_address to be a brief
+ summary of what the function does.
+
+ There should be no user visible changes after this commit.
+
+ Reviewed-By: Tom Tromey <tom@tromey.com>
+
+2023-03-30 Andrew Burgess <aburgess@redhat.com>
+
+ gdb/python: remove Py_TPFLAGS_BASETYPE from gdb.UnwindInfo
+ It is not currently possible to directly create gdb.UnwindInfo
+ instances, they need to be created by calling
+ gdb.PendingFrame.create_unwind_info so that the newly created
+ UnwindInfo can be linked to the pending frame.
+
+ As such there's no tp_init method defined for UnwindInfo.
+
+ A consequence of all this is that it doesn't really make sense to
+ allow sub-classing of gdb.UnwindInfo. Any sub-class can't call the
+ parents __init__ method to correctly link up the PendingFrame
+ object (there is no parent __init__ method). And any instances that
+ sub-classes UnwindInfo but doesn't call the parent __init__ is going
+ to be invalid for use in GDB.
+
+ This commit removes the Py_TPFLAGS_BASETYPE flag from the UnwindInfo
+ class, which prevents the class being sub-classed. Then I've added a
+ test to check that this is indeed prevented.
+
+ Any functional user code will not have any issues with this change.
+
+ Reviewed-By: Tom Tromey <tom@tromey.com>
+
+2023-03-30 Andrew Burgess <aburgess@redhat.com>
+
+ gdb/python: add __repr__ for PendingFrame and UnwindInfo
+ Having a useful __repr__ method can make debugging Python code that
+ little bit easier. This commit adds __repr__ for gdb.PendingFrame and
+ gdb.UnwindInfo classes, along with some tests.
+
+ Reviewed-By: Tom Tromey <tom@tromey.com>
+
+2023-03-30 Andrew Burgess <aburgess@redhat.com>
+
+ gdb/python: add some additional methods to gdb.PendingFrame
+ The gdb.Frame class has far more methods than gdb.PendingFrame. Given
+ that a PendingFrame hasn't yet been claimed by an unwinder, there is a
+ limit to which methods we can add to it, but many of the methods that
+ the Frame class has, the PendingFrame class could also support.
+
+ In this commit I've added those methods to PendingFrame that I believe
+ are safe.
+
+ In terms of implementation: if I was starting from scratch then I
+ would implement many of these (or most of these) as attributes rather
+ than methods. However, given both Frame and PendingFrame are just
+ different representation of a frame, I think there is value in keeping
+ the interface for the two classes the same. For this reason
+ everything here is a method -- that's what the Frame class does.
+
+ The new methods I've added are:
+
+ - gdb.PendingFrame.is_valid: Return True if the pending frame
+ object is valid.
+
+ - gdb.PendingFrame.name: Return the name for the frame's function,
+ or None.
+
+ - gdb.PendingFrame.pc: Return the $pc register value for this
+ frame.
+
+ - gdb.PendingFrame.language: Return a string containing the
+ language for this frame, or None.
+
+ - gdb.PendingFrame.find_sal: Return a gdb.Symtab_and_line object
+ for the current location within the pending frame, or None.
+
+ - gdb.PendingFrame.block: Return a gdb.Block for the current
+ pending frame, or None.
+
+ - gdb.PendingFrame.function: Return a gdb.Symbol for the current
+ pending frame, or None.
+
+ In every case I've just copied the implementation over from gdb.Frame
+ and cleaned the code slightly e.g. NULL to nullptr. Additionally each
+ function required a small update to reflect the PendingFrame type, but
+ that's pretty minor.
+
+ There are tests for all the new methods.
+
+ For more extensive testing, I added the following code to the file
+ gdb/python/lib/command/unwinders.py:
+
+ from gdb.unwinder import Unwinder
+
+ class TestUnwinder(Unwinder):
+ def __init__(self):
+ super().__init__("XXX_TestUnwinder_XXX")
+
+ def __call__(self,pending_frame):
+ lang = pending_frame.language()
+ try:
+ block = pending_frame.block()
+ assert isinstance(block, gdb.Block)
+ except RuntimeError as rte:
+ assert str(rte) == "Cannot locate block for frame."
+ function = pending_frame.function()
+ arch = pending_frame.architecture()
+ assert arch is None or isinstance(arch, gdb.Architecture)
+ name = pending_frame.name()
+ assert name is None or isinstance(name, str)
+ valid = pending_frame.is_valid()
+ pc = pending_frame.pc()
+ sal = pending_frame.find_sal()
+ assert sal is None or isinstance(sal, gdb.Symtab_and_line)
+ return None
+
+ gdb.unwinder.register_unwinder(None, TestUnwinder())
+
+ This registers a global unwinder that calls each of the new
+ PendingFrame methods and checks the result is of an acceptable type.
+ The unwinder never claims any frames though, so shouldn't change how
+ GDB actually behaves.
+
+ I then ran the testsuite. There was only a single regression, a test
+ that uses 'disable unwinder' and expects a single unwinder to be
+ disabled -- the extra unwinder is now disabled too, which changes the
+ test output. So I'm reasonably confident that the new methods are not
+ going to crash GDB.
+
+ Reviewed-By: Eli Zaretskii <eliz@gnu.org>
+ Reviewed-By: Tom Tromey <tom@tromey.com>
+
+2023-03-30 Andrew Burgess <aburgess@redhat.com>
+
+ gdb/python: add PENDING_FRAMEPY_REQUIRE_VALID macro in py-unwind.c
+ This commit copies the pattern that is present in many other py-*.c
+ files: having a single macro to check that the Python object is still
+ valid.
+
+ This cleans up the code a little throughout the py-unwind.c file.
+
+ Some of the exception messages will change slightly with this commit,
+ though the type of the exceptions is still ValueError in all cases.
+
+ I started writing some tests for this change and immediately ran into
+ a problem: GDB would crash. It turns out that the PendingFrame
+ objects are not being marked as invalid!
+
+ In pyuw_sniffer where the pending frames are created, we make use of a
+ scoped_restore to invalidate the pending frame objects. However, this
+ only restores the pending_frame_object::frame_info field to its
+ previous value -- and it turns out we never actually give this field
+ an initial value, it's left undefined.
+
+ So, when the scoped_restore (called invalidate_frame) performs its
+ cleanup, it actually restores the frame_info field to an undefined
+ value. If this undefined value is not nullptr then any future
+ accesses to the PendingFrame object result in undefined behaviour and
+ most likely, a crash.
+
+ As part of this commit I now initialize the frame_info field, which
+ ensures all the new tests now pass.
+
+ Reviewed-By: Tom Tromey <tom@tromey.com>
+
+2023-03-30 Andrew Burgess <aburgess@redhat.com>
+
+ gdb/python: remove unneeded nullptr check in frapy_block
+ Spotted a redundant nullptr check in python/py-frame.c in the function
+ frapy_block. This was introduced in commit 57126e4a45e3000e when we
+ expanded an earlier check in return early if the pointer in question
+ is nullptr.
+
+ There should be no user visible changes after this commit.
+
+ Reviewed-By: Tom Tromey <tom@tromey.com>
+
+2023-03-30 Andrew Burgess <aburgess@redhat.com>
+
+ gdb/python: make the gdb.unwinder.Unwinder class more robust
+ This commit makes a few related changes to the gdb.unwinder.Unwinder
+ class attributes:
+
+ 1. The 'name' attribute is now a read-only attribute. This prevents
+ user code from changing the name after registering the unwinder. It
+ seems very unlikely that any user is actually trying to do this in
+ the wild, so I'm not very worried that this will upset anyone,
+
+ 2. We now validate that the name is a string in the
+ Unwinder.__init__ method, and throw an error if this is not the
+ case. Hopefully nobody was doing this in the wild. This should
+ make it easier to ensure the 'info unwinder' command shows sane
+ output (how to display a non-string name for an unwinder?),
+
+ 3. The 'enabled' attribute is now implemented with a getter and
+ setter. In the setter we ensure that the new value is a boolean,
+ but the real important change is that we call
+ 'gdb.invalidate_cached_frames()'. This means that the backtrace
+ will be updated if a user manually disables an unwinder (rather than
+ calling the 'disable unwinder' command). It is not unreasonable to
+ think that a user might register multiple unwinders (relating to
+ some project) and have one command that disables/enables all the
+ related unwinders. This command might operate by poking the enabled
+ attribute of each unwinder object directly, after this commit, this
+ would now work correctly.
+
+ There's tests for all the changes, and lots of documentation updates
+ that both cover the new changes, but also further improve (I think)
+ the general documentation for GDB's Unwinder API.
+
+ Reviewed-By: Eli Zaretskii <eliz@gnu.org>
+ Reviewed-By: Tom Tromey <tom@tromey.com>
+
+2023-03-30 Nick Clifton <nickc@redhat.com>
+
+ Fix an illegal memory access when an accessing a zer0-lengthverdef table.
+ PR 30285
+ * elf.c (_bfd_elf_slurp_version_tables): Fail if no version definitions are allocated.
+
+2023-03-30 Vladimir Mezentsev <vladimir.mezentsev@oracle.com>
+
+ gprofng: Add version symbols to libgprofng.ver
+ gprofng/ChangeLog
+ 2023-03-29 Vladimir Mezentsev <vladimir.mezentsev@oracle.com>
+
+ PR gprofng/30089
+ * libcollector/libgprofng.ver: Add version symbols.
+ * libcollector/synctrace.c: Fix typo for pthread_mutex_lock.
+
+2023-03-30 Alan Modra <amodra@gmail.com>
+
+ Setting sh_link for SHT_REL/SHT_RELA
+ It's wrong to have an alloc reloc section trying to use a non-alloc
+ symbol table.
+
+ * elf.c (assign_section_numbers <SHT_REL, SHT_RELA>): Correct
+ comment. Always set sh_link to .dynsym for alloc reloc
+ sections and to .symtab for non-alloc.
+
+2023-03-30 Alan Modra <amodra@gmail.com>
+
+ Fix memory leak in bfd_get_debug_link_info_1
+ * opncls.c (bfd_get_alt_debug_link_info): Don't bother freeing
+ after bfd_malloc_and_get_section failure.
+ (get_build_id): Likewise.
+ (bfd_get_debug_link_info_1): Likewise. Free section contents
+ when crc not present.
+ * section.c (bfd_malloc_and_get_section): Document that the
+ buffer is NULL on error return.
+
+ Tidy leaked objcopy memory
+ * objcopy.c (delete_symbol_htabs): Also free symbols.
+ (write_debugging_info): Free strings and syms once written.
+ * wrstabs.c (write_stabs_in_sections_debugging_info): memset
+ entire info struct. Free hash tables before returning. Free
+ syms on error return.
+
+ Tidy memory on addr2line failures
+ * addr2line.c (process_file): Close bfd on error paths.
+
+2023-03-30 Roland McGrath <mcgrathr@google.com>
+
+ Fix typo in ld manual --enable-non-contiguous-regions example
+
+2023-03-30 GDB Administrator <gdbadmin@sourceware.org>
+
+ Automatic date update in version.in
+
+2023-03-30 Palmer Dabbelt <palmer@rivosinc.com>
+
+ RISC-V: PR28789, Reject R_RISCV_PCREL relocations with ABS symbol in PIC/PIE.
+ The non-preemptible SHN_ABS symbol with a pc-relative relocation should be
+ disallowed when generating shared object (pic and pie). Generally, the
+ following cases, which refer to pr25749, will cause a symbol be
+ non-preemptible,
+
+ * -pie, or -shared with -symbolic
+ * STV_HIDDEN, STV_INTERNAL, STV_PROTECTED
+ * Have dynamic symbol table, but without the symbol
+ * VER_NDX_LOCAL
+
+ However, PCREL_HI20/LO12 relocs are always bind locally when generating
+ shared object, so not only the non-preemptible absolute symbol need to
+ be disallowed, all absolute symbol references need but except that they
+ are defined in linker script. If we also disallow the absolute symbol
+ in linker script, then the glibc-linux toolchain build failed, so regard
+ them as pc-relative symbols, just like what x86 did.
+
+ Maybe we should add this check for all pc-relative relocations, rather
+ than just handle in R_RISCV_PCREL relocs. Ideally, since the value of
+ SHN_ABS symbol is a constant, only S - A relocations should be allowed
+ in the shared object, so only BFD_RELOC_8/16/32/64 are allowed, which
+ means R_RISCV_32/R_RISCV_64.
+
+ bfd/
+ PR 28789
+ * elfnn-riscv.c (riscv_elf_check_relocs): The absolute symbol cannot be
+ referneced with pc-relative relocation when generating shared object.
+ ld/
+ PR 28789
+ * ld/testsuite/ld-riscv-elf/ld-riscv-elf.exp: Updated.
+ * ld/testsuite/ld-riscv-elf/pcrel-reloc*: New testcases.
+
+2023-03-30 Nelson Chu <nelson@rivosinc.com>
+
+ RISC-V: Clarify link behaviors of R_RISCV_32/64 relocations with ABS symbol.
+ There are two improvements, which are all referenced to aarch64,
+
+ * R_RISCV_32 with non ABS symbol cannot be used under RV64 when making
+ shard objects.
+
+ * Don't need dynamic relocation for R_RISCV_32/64 under RV32/RV64 when
+ making shared objects, if the referenced symbol is local ABS symbol.
+
+ However, considering this link,
+ https://github.com/riscv-non-isa/riscv-elf-psabi-doc/issues/341
+
+ Seems like we should makes all R_RISCV_32/64 relocs with ABS symbol
+ that don't need any dynamic relocations when making the shared objects.
+ But anyway, I just sync the current behavior as aarch64 ld, in case
+ there are any unexpected behaviors happen.
+
+ Passed the gcc/binutils regressions in riscv-gnu-toolchain.
+
+ bfd/
+ * elfnn-riscv.c (riscv_elf_check_relocs): Only allow R_RISCV_32 with ABS
+ symbol under RV64.
+ (riscv_elf_relocate_section): R_RISCV_32/64 with local ABS symbol under
+ RV32/RV64 doesn't need any dynamic relocation when making shared objects.
+ I just make the implementations similar to other targets, so that will be
+ more easy to mainatain.
+ ld/
+ * testsuite/ld-riscv-elf/data-reloc*: New testcases.
+ * testsuite/ld-riscv-elf/ld-riscv-elf.exp: Added new data-reloc* testcases,
+ and need to make ifunc-seperate* testcases work for rv32.
+ * testsuite/ld-riscv-elf/ifunc-seperate-caller-nonplt.s: Likewise.
+ * testsuite/ld-riscv-elf/ifunc-seperate-caller-plt.s: Likewise.
+
+2023-03-30 Nelson Chu <nelson@rivosinc.com>
+
+ RISC-V: Extract the ld code which are too complicated, and may be reused.
+ These types of codes are different for each target, I am not sure what are the
+ best for RISC-V, so extract them out may be more easy to compare what's the
+ difference.
+
+ bfd/
+ * elfnn-riscv.c (RISCV_NEED_DYNAMIC_RELOC): New defined. Extracted
+ from riscv_elf_check_relocs, to see if dynamic reloc is needed for the
+ specific relocation.
+ (RISCV_GENERATE_DYNAMIC_RELOC): New defined. Extracted from
+ riscv_elf_relocate_section, to see if R_RISCV_32/64 need to generate
+ dynamic relocation.
+ (RISCV_COPY_INPUT_RELOC): New defined. Extracted from
+ riscv_elf_relocate_section, to see if R_RISCV_32/64 need to copy itslef
+ tp output file.
+ (RISCV_RESOLVED_LOCALLY): New defined. Extracted from
+ riscv_elf_relocate_section, to see if R_RISCV_GOT_HI20 can be resolved
+ locally.
+
+2023-03-29 Tom Tromey <tromey@adacore.com>
+
+ Use the correct frame when evaluating a dynamic property
+ The test case in this patch shows an unusual situation: an Ada array
+ has a dynamic bound, but the bound comes from a frame that's referred
+ to by the static link. This frame is correctly found when evaluating
+ the array variable itself, but is lost when evaluating the array's
+ bounds.
+
+ This patch fixes the problem by passing this frame through to
+ value_at_lazy in the DWARF expression evaluator.
+
+2023-03-29 Tom Tromey <tromey@adacore.com>
+
+ Pass a frame to value_at_lazy and value_from_contents_and_address
+ This patch adds a 'frame' parameter to value_at_lazy and ensures that
+ it is passed down to the call to resolve_dynamic_type. This required
+ also adding a frame parameter to value_from_contents_and_address.
+
+ Nothing passes this parameter to value_at_lazy yet, so this patch
+ should have no visible effect.
+
+2023-03-29 Tom Tromey <tromey@adacore.com>
+
+ Add frame parameter to resolve_dynamic_type
+ This adds a frame parameter to resolve_dynamic_type and arranges for
+ it to be passed through the call tree and, in particular, to all calls
+ to dwarf2_evaluate_property.
+
+ Nothing passes this parameter yet, so this patch should have no
+ visible effect.
+
+ A 'const frame_info_ptr *' is used here to avoid including frame.h
+ from gdbtypes.h.
+
+2023-03-29 Tom Tromey <tromey@adacore.com>
+
+ Remove version_at_least
+ version_at_least is a less capable variant of version_compare, so this
+ patch removes it.
+
+ Rewrite version_compare and rust_at_least
+ This rewrites version_compare to allow the input lists to have
+ different lengths, then rewrites rust_at_least to use version_compare.
+
+ Introduce rust_at_least helper proc
+ This adds a 'rust_at_least' helper proc, for checking the version of
+ the Rust compiler in use. It then changes various tests to use this
+ with 'require'.
+
+2023-03-29 Tom de Vries <tdevries@suse.de>
+
+ [gdb/testsuite] Require gnatmake 11 for gdb.ada/verylong.exp
+ With test-case gdb.ada/verylong.exp and gnatmake 7.5.0 I run into:
+ ...
+ compilation failed: gcc ... $src/gdb/testsuite/gdb.ada/verylong/prog.adb
+ prog.adb:16:11: warning: file name does not match unit name, should be "main.adb"
+ prog.adb:17:08: "Long_Long_Long_Integer" is undefined (more references follow)
+ gnatmake: "prog.adb" compilation error
+
+ FAIL: gdb.ada/verylong.exp: compilation prog.adb
+ ...
+
+ AFAICT, support for Long_Long_Long_Integer was added in gcc 11.
+
+ Fix this by requiring gnatmake version 11 or higher in the test-case.
+
+ Tested on x86_64-linux.
+
+2023-03-29 Nils-Christian Kempke <nils-christian.kempke@intel.com>
+
+ doc: fix informations typo in gdb.texinfo
+ Co-Authored-By: Christina Schimpe <christina.schimpe@intel.com>
+
+2023-03-29 Nils-Christian Kempke <nils-christian.kempke@intel.com>
+
+ gdb, infcmd: remove redundant ERROR_NO_INFERIOR in continue_command
+ The ERROR_NO_INFERIOR macro is already called at the beginning of the
+ function continue_command. Since target/inferior are not switched in-between,
+ the second call to it is redundant.
+
+ Co-Authored-By: Christina Schimpe <christina.schimpe@intel.com>
+
+2023-03-29 Andrew Burgess <aburgess@redhat.com>
+
+ gdb: move displaced_step_dump_bytes into gdbsupport (and rename)
+ It was pointed out during review of another patch that the function
+ displaced_step_dump_bytes really isn't specific to displaced stepping,
+ and should really get a more generic name and move into gdbsupport/.
+
+ This commit does just that. The function is renamed to
+ bytes_to_string and is moved into gdbsupport/common-utils.{cc,h}. The
+ function implementation doesn't really change. Much...
+
+ ... I have updated the function to take an array view, which makes it
+ slightly easier to call in a couple of places where we already have a
+ gdb::bytes_vector. I've then added an inline wrapper to convert a raw
+ pointer and length into an array view, which is used in places where
+ we don't easily have a gdb::bytes_vector (or similar).
+
+ Updated all users of displaced_step_dump_bytes.
+
+ There should be no user visible changes after this commit.
+
+ Finally, I ended up having to add an include of gdb_assert.h into
+ array-view.h. When I include array-view.h into common-utils.h I ran
+ into build problems because array-view.h calls gdb_assert.
+
+ Approved-By: Simon Marchi <simon.marchi@efficios.com>
+
+2023-03-29 Andrew Burgess <aburgess@redhat.com>
+
+ gdb: more debug output for displaced stepping
+ While investigating a displaced stepping issue I wanted an easy way to
+ see what GDB thought the original instruction was, and what
+ instruction GDB replaced that with when performing the displaced step.
+
+ We do print out the address that is being stepped, so I can track down
+ the original instruction, I just need to go find the information
+ myself.
+
+ And we do print out the bytes of the new instruction, so I can figure
+ out what the replacement instruction was, but it's not really easy.
+
+ Also, the code that prints the bytes of the replacement instruction
+ only prints 4 bytes, which clearly isn't always going to be correct.
+
+ In this commit I remove the existing code that prints the bytes of the
+ replacement instruction, and add two new blocks of code to
+ displaced_step_prepare_throw. This new code prints the original
+ instruction, and the replacement instruction. In each case we print
+ both the bytes that make up the instruction and the completely
+ disassembled instruction.
+
+ Here's an example of what the output looks like on x86-64 (this is
+ with 'set debug displaced on'). The two interesting lines contain the
+ strings 'original insn' and 'replacement insn':
+
+ (gdb) step
+ [displaced] displaced_step_prepare_throw: displaced-stepping 2892655.2892655.0 now
+ [displaced] displaced_step_prepare_throw: original insn 0x401030: ff 25 e2 2f 00 00 jmp *0x2fe2(%rip) # 0x404018 <puts@got.plt>
+ [displaced] prepare: selected buffer at 0x401052
+ [displaced] prepare: saved 0x401052: 1e fa 31 ed 49 89 d1 5e 48 89 e2 48 83 e4 f0 50
+ [displaced] fixup_riprel: %rip-relative addressing used.
+ [displaced] fixup_riprel: using temp reg 2, old value 0x7ffff7f8a578, new value 0x401036
+ [displaced] amd64_displaced_step_copy_insn: copy 0x401030->0x401052: ff a1 e2 2f 00 00 68 00 00 00 00 e9 e0 ff ff ff
+ [displaced] displaced_step_prepare_throw: prepared successfully thread=2892655.2892655.0, original_pc=0x401030, displaced_pc=0x401052
+ [displaced] displaced_step_prepare_throw: replacement insn 0x401052: ff a1 e2 2f 00 00 jmp *0x2fe2(%rcx)
+ [displaced] finish: restored 2892655.2892655.0 0x401052
+ [displaced] amd64_displaced_step_fixup: fixup (0x401030, 0x401052), insn = 0xff 0xa1 ...
+ [displaced] amd64_displaced_step_fixup: restoring reg 2 to 0x7ffff7f8a578
+ 0x00007ffff7e402c0 in puts () from /lib64/libc.so.6
+ (gdb)
+
+ One final note. For many targets that support displaced stepping (in
+ fact all targets except ARM) the replacement instruction is always a
+ single instruction. But on ARM the replacement could actually be a
+ series of instructions.
+
+ The debug code tries to handle this by disassembling the entire
+ displaced stepping buffer. Obviously this might actually print more
+ than is necessary, but there's (currently) no easy way to know how
+ many instructions to disassemble; that knowledge is all locked in the
+ architecture specific code. Still I don't think it really hurts, if
+ someone is looking at this debug then hopefully they known what to
+ expect.
+
+ Obviously we can imagine schemes where the architecture specific
+ displaced stepping code could communicate back how many bytes its
+ replacement sequence was, and then our debug print code could use this
+ to limit the disassembly. But this seems like a lot of effort just to
+ save printing a few additional instructions in some debug output.
+
+ I'm not proposing to do anything about this issue for now.
+
+ Approved-By: Simon Marchi <simon.marchi@efficios.com>
+
+2023-03-29 Tom de Vries <tdevries@suse.de>
+
+ [gdb/testsuite] Fix gdb.guile/scm-symbol.exp for remote host
+ Fix test-case gdb.guile/scm-symbol.exp for remote host by making a regexp less
+ strict.
+
+ Likewise in gdb.guile/scm-symtab.exp.
+
+ Tested on x86_64-linux.
+
+2023-03-29 Tom de Vries <tdevries@suse.de>
+
+ [gdb/testsuite] Fix /gdb.guile/scm-parameter.exp for remote host
+ Fix test-case gdb.guile/scm-parameter.exp for remote host by taking into
+ account that gdb_reinitialize_dir has no effect for remote host.
+
+ Tested on x86_64-linux.
+
+2023-03-29 Tom de Vries <tdevries@suse.de>
+
+ [gdb/testsuite] Fix gdb.guile/scm-objfile-script.exp for remote host
+ Fix test-case gdb.guile/scm-objfile-script.exp using gdb_remote_download.
+
+ Tested on x86_64-linux.
+
+2023-03-29 Tom de Vries <tdevries@suse.de>
+
+ [gdb/testsuite] Fix gdb.guile/scm-objfile-script.exp for remote host
+ Fix test-case gdb.guile/scm-objfile-script.exp using host_standard_output_file.
+
+ Tested on x86_64-linux.
+
+2023-03-29 Tom de Vries <tdevries@suse.de>
+
+ [gdb/testsuite] Fix gdb.guile/scm-cmd.exp without readline
+ Fix test-case gdb.guile/scm-cmd.exp using readline_is_used.
+
+ Tested on x86_64-linux.
+
+2023-03-29 Tom de Vries <tdevries@suse.de>
+
+ [gdb/testsuite] Fix gdb.guile/guile.exp for remote host
+ Fix test-case gdb.guile/guile.exp for remote host using gdb_remote_download.
+
+ Tested on x86_64-linux.
+
+2023-03-29 Alan Modra <amodra@gmail.com>
+
+ Sanity check section size in bfd_init_section_compress_status
+ This function doesn't just initialise for compression, it actually
+ compresses. This patch sanity checks section size before allocating
+ buffers for the uncompressed contents.
+
+ * compress.c (bfd_init_section_compress_status): Sanity check
+ section size.
+
+2023-03-29 Alan Modra <amodra@gmail.com>
+
+ Re: Fix an aout memory leak
+ We have way too much duplicated code in bfd. Apply dd3a3d0af9f6 and
+ 920581c57e08 to pdp11.c.
+
+ * pdp11.c (bfd_free_cached_info): Free line_buf. Return true
+ if tdata.aout_data is NULL.
+
+2023-03-29 Alan Modra <amodra@gmail.com>
+
+ ld testsuite CFLAGS_FOR_TARGET
+ run_host_cmd adds $gcc_B_opt and $ld_L_opt to the command line if it
+ detects the program being run is a compiler. Since the program being
+ run in lto.exp linking pr28138 is "sh", we need to add these by hand.
+ This isn't exactly as run_host_cmd does, as it lacks reordering of
+ any user -B option in $CC_FOR_TARGET, but it's better than ignoring
+ gcc_B_opt. This fixes a mips64 testsuite fail.
+
+ ld_compile adds CFLAGS_FOR_TARGET and other flags as well, so there
+ is no need for the ld_compile command line to include
+ CFLAGS_FOR_TARGET. Fixing this is just a tidy.
+
+ * testsuite/ld-plugin/lto.exp: Add gcc_B_opt, CFLAGS_FOR_TARGET
+ and $ld_L_opt to pr28138 link line.
+ * testsuite/lib/ld-lib.exp (run_ld_link_tests): Don't pass
+ unnecessary flags to ld_compile.
+ (run_ld_link_exec_tests, run_cc_link_tests): Likewise.
+
+2023-03-29 GDB Administrator <gdbadmin@sourceware.org>
+
+ Automatic date update in version.in
+
+2023-03-28 Tom Tromey <tom@tromey.com>
+
+ Rename "raw" to "unrelocated"
+ Per an earlier discussion, this patch renames the existing "raw" APIs
+ to use the word "unrelocated" instead.
+
+ Use unrelocated_addr in minimal symbols
+ This changes minimal symbols to use unrelocated_addr. I believe this
+ detected a latent bug in add_pe_forwarded_sym.
+
+ Use unrelocated_addr in psymbols
+ This changes psymbols themselves to use unrelocated_addr. This
+ transform is largely mechanical. I don't think it finds any bugs.
+
+ Use unrelocated_addr in partial symbol tables
+ This changes partial symbol tables to use unrelocated_addr for the
+ text_high and text_low members. This revealed some latent bugs in
+ ctfread.c, which are fixed here.
+
+ Move definition of unrelocated_addr earlier
+ This moves the definition of unrelocated_addr a bit earlier in
+ symtab.h, so that it can be used elsewhere in the file.
+
+ Use function_view in gdb_bfd_lookup_symbol
+ This changes gdb_bfd_lookup_symbol to use a function_view. This
+ simplifies the code a little bit.
+
+2023-03-28 Tom de Vries <tdevries@suse.de>
+
+ [gdb/testsuite] Fix gdb.btrace/multi-inferior.exp for remote host
+ Fix test-case gdb.btrace/multi-inferior.exp for remote host using
+ gdb_remote_download.
+
+ Tested on x86_64-linux.
+
+2023-03-28 Tom de Vries <tdevries@suse.de>
+
+ [gdb/testsuite] Fix gdb.btrace/gcore.exp for remote host
+ Fix test-case gdb.btrace/gcore.exp for remote host using
+ host_standard_output.
+
+ Tested on x86_64-linux.
+
+2023-03-28 Tom de Vries <tdevries@suse.de>
+
+ [gdb/testsuite] Fix gdb.btrace/reconnect.exp for remote target
+ Fix test-case gdb.btrace/reconnect.exp for target board
+ remote-gdbserver-on-localhost using gdb_remote_download.
+
+ Tested on x86_64-linux.
+
+2023-03-28 Tom Tromey <tromey@adacore.com>
+
+ Put pretty-printers to_string output in varobj result
+ PR mi/11335 points out that an MI varobj will not display the result
+ of a pretty-printer's "to_string" method. Instead, it always shows
+ "{...}".
+
+ This does not seem very useful, and there have been multiple
+ complaints about it over the years. This patch changes varobj to emit
+ this string when possible, and updates the test suite.
+
+ Bug: https://sourceware.org/bugzilla/show_bug.cgi?id=11335
+
+2023-03-28 Simon Marchi <simon.marchi@efficios.com>
+
+ gdb/testsuite: allow "require" callbacks to provide a reason
+ When an allow_* proc returns false, it can be a bit difficult what check
+ failed exactly, if the procedure does multiple checks. To make
+ investigation easier, I propose to allow the "require" callbacks to be
+ able to return a list of two elements: the zero/non-zero value, and a
+ reason string.
+
+ Use the new feature in allow_hipcc_tests to demonstrate it (it's also
+ where I hit actually hit this inconvenience). On my computer (where GDB
+ is built with amd-dbgapi support but where I don't have a suitable GPU
+ target), I get:
+
+ UNSUPPORTED: gdb.rocm/simple.exp: require failed: allow_hipcc_tests (no suitable amdgpu targets found)
+
+ vs before:
+
+ UNSUPPORTED: gdb.rocm/simple.exp: require failed: allow_hipcc_tests
+
+ Change-Id: Id1966535b87acfcbe9eac99f49dc1196398c6578
+ Approved-By: Tom de Vries <tdevries@suse.de>
+
+2023-03-28 Tom de Vries <tdevries@suse.de>
+
+ [gdb/testsuite] Fix gdb.server/server-kill-python.exp for remote host
+ Fix test-case gdb.server/server-kill-python.exp for remote host using
+ gdb_remote_download.
+
+ Tested on x86_64-linux.
+
+2023-03-28 Tom de Vries <tdevries@suse.de>
+
+ [gdb/testsuite] Fix gdb.server/sysroot.exp for remote host
+ Fix test-case gdb.server/sysroot.exp for remote host, by:
+ - using gdb_remote_download, and
+ - disabling the "local" scenario for remote host/target, unless
+ remote host == remote target.
+
+ Tested on x86_64-linux.
+
+2023-03-28 Tom de Vries <tdevries@suse.de>
+
+ [gdb/testsuite] Require non-remote host for gdb.server/multi-ui-errors.exp
+ Require non-remote host for test-case gdb.server/multi-ui-errors.exp, because
+ it uses "spawn -pty", which creates a pty on build, which gdb cannot use on
+ remote host.
+
+ Tested on x86_64-linux.
+
+2023-03-28 Tom de Vries <tdevries@suse.de>
+
+ [gdb/testsuite] Fix gdb.server/solib-list.exp for remote host
+ Fix test-case gdb.server/solib-list.exp for remote host using
+ gdb_remote_download.
+
+ Likewise in another test-case.
+
+ Tested on x86_64-linux.
+
+2023-03-28 Tom de Vries <tdevries@suse.de>
+
+ [gdb/testsuite] Fix gdb.server/file-transfer.exp for remote host
+ Fix test-case gdb.server/file-transfer.exp for remote host using
+ gdb_remote_download and host_standard_output_file.
+
+ Tested on x86_64-linux.
+
+2023-03-28 Tom de Vries <tdevries@suse.de>
+
+ [gdb/testsuite] Fix local-remote-host-native.exp for gdb.server tests
+ When running test-case gdb.server/stop-reply-no-thread-multi.exp with
+ host+target board local-remote-host-native, I run into a time-out:
+ ...
+ (gdb) PASS: gdb.server/stop-reply-no-thread-multi.exp: target-non-stop=off: \
+ to_disable=: disconnect
+ builtin_spawn /usr/bin/ssh -t -l vries 127.0.0.1 gdbserver --once \
+ localhost:2346 stop-reply-no-thread-multi^M
+ Process stop-reply-no-thread-multi created; pid = 32600^M
+ Listening on port 2346^M
+ set remote threads-packet off^M
+ FAIL: gdb.server/stop-reply-no-thread-multi.exp: target-non-stop=off: \
+ to_disable=: set remote threads-packet off (timeout)
+ ...
+
+ This is due to this line in ${board}_spawn:
+ ...
+ set board_info($board,fileid) $spawn_id
+ ...
+
+ We have the following series of events:
+ - gdb is spawned, setting fileid
+ - a few gdb commands (set height etc) are send using fileid, arrive at gdb and
+ are successful
+ - gdbserver is spawned, overwriting fileid
+ - the next gdb command is sent using fileid, so it's send
+ to gdbserver instead of gdb, and we run into the timeout.
+
+ There is some notion of current gdb, tracked in both gdb_spawn_id and fileid
+ of the host board (see switch_gdb_spawn_id). And because the host and target
+ board are the same, spawning something on the target overwrites the fileid on
+ host, and consequently the current gdb.
+
+ Fix this by only setting fileid when spawning gdb.
+
+ Tested on x86_64-linux.
+
+ Now gdb.server/*.exp passes for host+target board local-remote-host-native,
+ except for file-transfer.exp.
+
+ Bug: https://sourceware.org/bugzilla/show_bug.cgi?id=29734
+
+2023-03-28 Enze Li <enze.li@hotmail.com>
+
+ gdb: use dynamic year in update-freebsd.sh
+ When running update-freebsd.sh on FreeBSD, I see the following
+ modification in freebsd.xml,
+
+ -<!-- Copyright (C) 2009-2023 Free Software Foundation, Inc.
+ +<!-- Copyright (C) 2009-2020 Free Software Foundation, Inc.
+
+ It means that each time, when we running the update-freebsd.sh on
+ FreeBSD, we have to correct the year of copyright manually. So fix this
+ issue by using dynamic year.
+
+ Tested by regenerating freebsd.xml on FreeBSD/amd64.
+
+ Reviewed-By: John Baldwin <jhb@FreeBSD.org>
+ Approved-By: Simon Marchi <simon.marchi@efficios.com>
+
+2023-03-28 Tom de Vries <tdevries@suse.de>
+
+ [gdb/testsuite] Fix gdb.server/non-existing-program.exp with remote-gdbserver-on-localhost
+ With test-case gdb.server/non-existing-program.exp and native, I have reliably:
+ ...
+ (gdb) builtin_spawn gdbserver stdio non-existing-program^M
+ stdin/stdout redirected^M
+ /bin/bash: line 0: exec: non-existing-program: not found^M
+ During startup program exited with code 127.^M
+ Exiting^M
+ PASS: gdb.server/non-existing-program.exp: gdbserver exits cleanly
+ ...
+
+ But with target board remote-gdbserver-on-localhost I sometimes have:
+ ...
+ (gdb) builtin_spawn /usr/bin/ssh -t -l remote-target localhost gdbserver \
+ stdio non-existing-program^M
+ stdin/stdout redirected^M
+ /bin/bash: line 0: exec: non-existing-program: not found^M
+ During startup program exited with code 127.^M
+ Exiting^M
+ Connection to localhost closed.^M^M
+ PASS: gdb.server/non-existing-program.exp: gdbserver exits cleanly
+ ...
+ and sometimes the exact same output, but a FAIL instead.
+
+ Fix this by replacing "Exiting\r\n$" with "Exiting\r\n" in the regexps.
+
+ Tested on x86_64-linux.
+
+2023-03-28 Alan Modra <amodra@gmail.com>
+
+ Avoid undefined behaviour in m68hc11 md_begin
+ Given p = A where p is a pointer to some type and A is an array of
+ that type, then the expression p - 1 + 1 evokes undefined behaviour
+ according to the C standard.
+
+ gcc-13 -fsanitize=address,undefined complains about this, but not
+ where the undefined behaviour actually occurs at tc-m68hc11.c:646.
+ Instead you get an error: "tc-m68hc11.c:708:20: runtime error: store
+ to address 0x62600000016c with insufficient space for an object of
+ type 'int'". Which is a lie. There most definitely is space there.
+ Oh well, diagnostics are sometimes hard to get right. The UB is easy
+ to avoid.
+
+ PR 30279
+ * config/tc-m68hc11.c (md_begin): Avoid undefined pointer
+ decrement. Remove unnecessary cast.
+
+2023-03-28 Tom de Vries <tdevries@suse.de>
+
+ [gdb/testsuite] Allow gdb.rust/expr.exp without rust compiler
+ Proc allow_rust_tests returns 0 when there's no rust compiler, but that gives
+ the wrong answer for gdb.rust/expr.exp, which doesn't require it.
+
+ Fix this by using can_compile rust in the test-cases that need it, and just
+ returning 1 in allow_rust_tests.
+
+ Tested on x86_64-linux.
+
+2023-03-28 Tom de Vries <tdevries@suse.de>
+
+ [gdb/testsuite] Add can_compile rust
+ If I deinstall the rust compiler, I get:
+ ...
+ gdb compile failed, default_target_compile: Can't find rustc --color never.
+ UNTESTED: gdb.rust/watch.exp: failed to prepare
+ ...
+
+ Fix this by adding can_compile rust, and using it in allow_rust_tests, such
+ that we have instead:
+ ...
+ UNSUPPORTED: gdb.rust/watch.exp: require failed: allow_rust_tests
+ ...
+
+ Since the rest of the code in allow_rust_tests is also about availability of
+ the rust compiler, move it to can_compile.
+
+ Tested on x86_64-linux.
+
+2023-03-28 Tom de Vries <tdevries@suse.de>
+
+ [gdb/testsuite] Unsupport gdb.rust for remote host
+ With test-case gdb.rust/watch.exp and remote host I run into:
+ ...
+ Executing on host: gcc watch.rs -g -lm -o watch (timeout = 300)
+ ...
+ ld:watch.rs: file format not recognized; treating as linker script
+ ld:watch.rs:1: syntax error
+ ...
+ UNTESTED: gdb.rust/watch.exp: failed to prepare
+ ...
+
+ The problem is that find_rustc returns "" for remote host, so we fall back to gcc, which fails.
+
+ Fix this by returning 0 in allow_rust_tests for remote host.
+
+ Tested on x86_64-linux.
+
+2023-03-28 Alan Modra <amodra@gmail.com>
+
+ ubsan: elfnn-aarch64.c:4595:19: runtime error: load of value 190
+ which is not a valid value for type '_Bool'
+
+ * elfnn-aarch64.c (stub_hash_newfunc): Clear all fields past root.
+
+2023-03-28 GDB Administrator <gdbadmin@sourceware.org>
+
+ Automatic date update in version.in
+
+2023-03-27 Tom de Vries <tdevries@suse.de>
+
+ [gdb/testsuite] Fix gnat_runtime_has_debug_info for remote host
+ Fix gnat_runtime_has_debug_info for remote host by checking for
+ allow_ada_tests.
+
+ This fixes an error for test-case gdb.testsuite/gdb-caching-proc.exp and
+ remote host.
+
+ Tested on x86_64-linux.
+
+2023-03-27 John Baldwin <jhb@FreeBSD.org>
+
+ fbsd-nat: Use correct constant for target_waitstatus::sig.
+ Use GDB_SIGNAL_TRAP instead of SIGTRAP. This is a no-op since the
+ value of SIGTRAP on FreeBSD matches the value of GDB_SIGNAL_TRAP, but
+ it is more correct.
+
+ Approved-By: Simon Marchi <simon.marchi@efficios.com>
+
+2023-03-27 John Baldwin <jhb@FreeBSD.org>
+
+ fbsd-nat: Avoid a direct write to target_waitstatus::kind.
+ This is in #ifdef'd code for a workaround for FreeBSD versions older
+ than 11.1 which is why it wasn't caught earlier.
+
+ Approved-By: Simon Marchi <simon.marchi@efficios.com>
+
+2023-03-27 John Baldwin <jhb@FreeBSD.org>
+
+ fbsd-nat: Add missing spaces.
+ No functional change, just style fixes.
+
+ Approved-By: Simon Marchi <simon.marchi@efficios.com>
+
+2023-03-27 Vladimir Mezentsev <vladimir.mezentsev@oracle.com>
+
+ gprofng: 30089 [display text] Invalid number of threads
+ The real problem is that libcollector doesn't interpose thread_create@GLIBC_2.34
+ We interpose a lot of libC functions (dlopen, fork, pthread_create, etc.).
+ Some of these functions have versions. For example, dlopen@GLIBC_2.34,
+ dlopen@GLIBC_2.17, dlopen@GLIBC_2.2.5, etc.
+ We have to interpose each of the functions because we don't know
+ which version of libC will be used during profiling.
+ Historically, we have used three versions of scripts (mapfile.aarch64-Linux,
+ mapfile.amd64-Linux, mapfile.intel-Linux).
+ Three are not needed. One is enough
+
+ The fixes below include:
+ - merged all version symbols into one version script.
+ - added new version symbols which are defined in latest versions of libC.
+ - removed unused defines and duplicated code.
+ - added the DCL_FUNC_VER macro to define the version symbols.
+
+ Tested on x86_64 and aarch64 (OL8/OL9). No regression.
+
+ gprofng/ChangeLog
+ 2023-03-23 Vladimir Mezentsev <vladimir.mezentsev@oracle.com>
+
+ PR gprofng/30089
+ * libcollector/Makefile.am: Use libgprofng.ver instead of mapfile.*
+ * libcollector/configure.ac: Delete GPROFNG_VARIANT.
+ * src/collector_module.h: Move the SYMVER_ATTRIBUTE macro to collector.h
+ * libcollector/collector.h: Add macros (SYMVER_ATTRIBUTE, DCL_FUNC_VER).
+ Remove unused defines.
+ * libcollector/dispatcher.c: Interpose functions from libC.
+ Clean up the old code.
+ * libcollector/iotrace.c: Likewise.
+ * libcollector/libcol_util.c: Likewise.
+ * libcollector/linetrace.c: Likewise.
+ * libcollector/mmaptrace.c: Likewise.
+ * libcollector/synctrace.c: Likewise.
+ * libcollector/libgprofng.ver: New file.
+ * libcollector/Makefile.in: Rebuild.
+ * libcollector/configure: Rebuild.
+ * libcollector/mapfile.aarch64-Linux: Removed.
+ * libcollector/mapfile.amd64-Linux: Removed.
+ * libcollector/mapfile.intel-Linux: Removed.
+ * libcollector/mapfile.sparc-Linux: Removed.
+ * libcollector/mapfile.sparcv9-Linux: Removed.
+
+2023-03-27 Pedro Alves <pedro@palves.net>
+
+ linux-nat: introduce pending_status_str
+ I noticed that some debug log output printing an lwp's pending status
+ wasn't considering lp->waitstatus. This fixes it, by introducing a
+ new pending_status_str function.
+
+ Also fix the comment in gdb/linux-nat.h describing
+ lwp_info::waitstatus and details the description of lwp_info::status
+ while at it.
+
+ Change-Id: I66e5c7a363d30a925b093b195d72925ce5b6b980
+ Approved-By: Andrew Burgess <aburgess@redhat.com>
+
+2023-03-27 Pedro Alves <pedro@palves.net>
+
+ displaced step: pass down target_waitstatus instead of gdb_signal
+ This commit tweaks displaced_step_finish & friends to pass down a
+ target_waitstatus instead of a gdb_signal. This is needed because a
+ patch later in the step-over-{thread-exit,clone] series will want to
+ make displaced_step_buffers::finish handle
+ TARGET_WAITKIND_THREAD_EXITED. It also helps with the
+ TARGET_WAITKIND_THREAD_CLONED patch later in that same series.
+
+ It's also a bit more logical this way, as we don't have to pass down
+ signals when the thread didn't actually stop for a signal. So we can
+ also think of it as a clean up.
+
+ Bug: https://sourceware.org/bugzilla/show_bug.cgi?id=27338
+ Change-Id: I4c5d338647b028071bc498c4e47063795a2db4c0
+ Approved-By: Andrew Burgess <aburgess@redhat.com>
+
+2023-03-27 Tom de Vries <tdevries@suse.de>
+
+ [gdb/testsuite] Fix gdb.stabs/exclfwd.exp for remote host
+ Fix test-case gdb.stabs/exclfwd.exp for remote host using include_file.
+
+ Tested on x86_64-linux.
+
+2023-03-27 Tom de Vries <tdevries@suse.de>
+
+ [gdb/testsuite] Fix gdb.stabs/weird.exp for remote host
+ Fix test-case gdb.stabs/weird.exp for remote host by not using an absolute
+ destfile argument to gdb_remote_download, which doesn't work well with remotedir.
+
+2023-03-27 Tom de Vries <tdevries@suse.de>
+
+ [gdb/testsuite] Fix gdb.gdb/unittest.exp for remote host
+ Fix test-case gdb.gdb/unittest.exp for remote host, by:
+ - disabling the completion tests if readline is not used, and
+ - not using with_gdb_cwd $dir for remote host (because it does
+ not support changing to ".").
+
+ Tested on x86_64-linux.
+
+2023-03-27 Tom de Vries <tdevries@suse.de>
+
+ [gdb/testsuite] Skip do_self_tests on remote host
+ In do_self_tests we try to find out the location of the gdb to debug, which
+ will then be copied and renamed to xgdb.
+
+ In principle, the host board specifies the location of GDB, on host.
+
+ With remote host, we could upload that gdb from host to build/target, but we
+ would miss the data directory (which is listed as the reason to skip
+ do_self_tests for remote target).
+
+ We could fix that by instead taking the gdb from build instead, but that
+ wouldn't work with installed testing.
+
+ It seems easier to just skip this on remote host.
+
+ It could be made to work for the "[is_remote host] && [is_remote target]
+ && host == target" scenario (see board local-remote-host-native.exp), but
+ that doesn't seem worth the effort.
+
+ Tested on x86_64-linux.
+
+2023-03-27 Tom Tromey <tromey@adacore.com>
+
+ Change symbol::line to unsigned int
+ A user here at AdaCore noticed that, when debugging a certain program,
+ a stack frame reported line 34358, where it should have been line
+ 99894.
+
+ After debugging a bit, I discovered:
+
+ (top) p (99894 & ~65536)
+ $60 = 34358
+
+ That line, symbol::line is too narrow.
+
+ This patch widens the member and changes all the uses that currently
+ use the narrower type.
+
+ Approved-By: Simon Marchi <simon.marchi@efficios.com>
+
+2023-03-27 Tom Tromey <tromey@adacore.com>
+
+ Fix 128-bit integer bug in Ada
+ While working on 128-bit integer support, I found one spot in Ada that
+ needed a fix as well.
+
+2023-03-27 Tom Tromey <tromey@adacore.com>
+
+ Use gdb_gmp for scalar arithmetic
+ This changes gdb to use scalar arithmetic for expression evaluation.
+
+ I suspect this patch is not truly complete, as there may be code paths
+ that still don't correctly handle 128-bit integers. However, many
+ things do work now.
+
+ Bug: https://sourceware.org/bugzilla/show_bug.cgi?id=30190
+
+2023-03-27 Tom Tromey <tromey@adacore.com>
+
+ Use value_true in value_equal and value_less
+ Both value_equal and value_less use value_as_long to check a
+ presumably boolean result of calling value_binop. However,
+ value_binop in this case actually returns an int as wide as its
+ arguments, and this approach can then fail for integers wider than
+ LONGEST. Instead, rewrite this in a form that works for any size
+ integer.
+
+2023-03-27 Tom Tromey <tromey@adacore.com>
+
+ Simplify binop_promote
+ binop_promote currently only handles integer sizes up to
+ builtin_long_long. However, this may not handle 128-bit types.
+ Simplify this code, unify the C and non-C (but not OpenCL, as I don't
+ know how to test this) cases, and handle 128-bit integers as well.
+
+ This still doesn't exactly follow C or C++ rules. This could be
+ implemented, but if so, I think it makes more sense as a C-specific
+ expression node.
+
+2023-03-27 Tom Tromey <tromey@adacore.com>
+
+ Add value_as_mpz and value_from_mpz
+ This adds the two new functions, value_as_mpz and value_from_mpz,
+ useful for manipulation values via gdb_mpz.
+
+ Add truncation mode to gdb_mpz
+ This renames gdb_mpz::safe_export to export_bits, and adds a new flag
+ to export a truncated value. This is needed by value arithmetic.
+
+ Avoid a copy in gdb_mpz::safe_export
+ Currently, gdb_mpz::safe_export will always make a copy of *this.
+ However, this copy isn't always needed. This patch makes this code
+ slightly more efficient, by avoiding the copy when possible.
+
+ Add many operators to gdb_mpz
+ This adds many operator overloads and other useful methods to gdb_mpz.
+ This is preparation for using this class for scalar arithmetic in gdb
+ expression evaluation.
+
+2023-03-27 Tom Tromey <tromey@adacore.com>
+
+ Populate seen_names hash in cooked_index_shard::do_finalize
+ Hannes pointed out that cooked_index_shard::do_finalize never
+ populates the seen_names hash table. This patch adds the necessary
+ store. This reduces memory use a little for "gdb gdb":
+
+ (before) Space used: 28909568 (+0 for this command)
+ (after) Space used: 28884992 (+0 for this command)
+
+ What this means, btw, is that in gdb there are not many symbols that
+ are both mentioned in many CUs and that also require name
+ canonicalization. It's possible this would differ in other programs.
+
+2023-03-27 Tom de Vries <tdevries@suse.de>
+
+ [gdb/testsuite] Fix gdb.asm/asm-source.exp for remote host
+ Fix test-case gdb.asm/asm-source.exp for remote host using
+ host_standard_output_file and gdb_remote_download.
+
+ Tested on x86_64-linux.
+
+2023-03-27 Tom de Vries <tdevries@suse.de>
+
+ [gdb/testsuite] Fix gdb.dwarf2/imported-unit-bp-c.exp for remote host
+ Fix test-case gdb.dwarf2/imported-unit-bp-c.exp on remote by removing a
+ downloaded source file.
+
+ Tested on x86_64-linux.
+
+2023-03-27 Tom de Vries <tdevries@suse.de>
+
+ [gdb/testsuite] Unsupport gdb.dwarf2/gdb-add-index-symlink.exp for remote host
+ Declare test-case gdb.dwarf2/gdb-add-index-symlink.exp unsupported for remote
+ host, because the current implementation of gdb_ensure_index doesn't support it.
+
+ Tested on x86_64-linux.
+
+2023-03-27 Tom de Vries <tdevries@suse.de>
+
+ [gdb/testsuite] Fix gdb.dwarf2/gdb-index-cxx.exp for remote host
+ Fix test-case gdb.dwarf2/gdb-index-cxx.exp for remote host using
+ host_standard_output_file.
+
+ Tested on x86_64-linux.
+
+2023-03-27 Tom de Vries <tdevries@suse.de>
+
+ [gdb/testsuite] Fix gdb.dwarf2/enqueued-cu-base-addr.exp for remote host
+ Fix test-case gdb.dwarf2/enqueued-cu-base-addr.exp for remote host by using
+ $testfile instead $binfile.
+
+ Tested on x86_64-linux.
+
+2023-03-27 Tom de Vries <tdevries@suse.de>
+
+ [gdb/testsuite] Fix gdb.dwarf2/gdb-index.exp on remote host
+ Fix test-case gdb.dwarf2/gdb-index.exp on remote host using
+ gdb_remote_download and host_standard_output_file.
+
+ Also declare the test-case unsupported with readnow.
+
+ Tested on x86_64-linux.
+
+2023-03-27 Tom de Vries <tdevries@suse.de>
+
+ [gdb/testsuite] Fix gdb.dwarf2/per-bfd-sharing.exp for remote host
+ Fix test-case gdb.dwarf2/per-bfd-sharing.exp for remote host using
+ gdb_remote_download.
+
+ Likewise in a few other test-cases.
+
+ Tested on x86_64-linux.
+
+2023-03-27 Tom de Vries <tdevries@suse.de>
+
+ [gdb/testsuite] Fix quoting issue in gdb.base/index-cache.exp
+ For test-case gdb.base/index-cache.exp and remote host, this:
+ ...
+ lassign [remote_exec host sh "-c \"rm $cache_dir/*.gdb-index\""] ret
+ ...
+ gives us:
+ ...
+ Executing on host: sh -c rm /tmp/tmp.m3L7m2AVkL/*.gdb-index (timeout = 300)
+ builtin_spawn -ignore SIGHUP sh -c rm /tmp/tmp.m3L7m2AVkL/*.gdb-index^M
+ rm: missing operand^M
+ Try 'rm --help' for more information.^M
+ FAIL: gdb.dwarf2/per-bfd-sharing.exp: couldn't remove files in temporary cache dir
+ ...
+
+ Fix this using quote_for_host. Likewise in gdb.dwarf2/per-bfd-sharing.exp.
+
+ Tested on x86_64-linux.
+
+2023-03-27 Tom de Vries <tdevries@suse.de>
+
+ [gdb/testsuite] Fix quoting issues in gdb.dwarf2 for remote host
+ A few test-cases in gdb.dwarf2 use something like:
+ ...
+ additional_flags=\"-DFOO=BAR + 10\"
+ ...
+ which doesn't work on remote host.
+
+ Fix this by introducing a new proc quote_for_host that also works for remote
+ host, such that we have:
+ ...
+ additional_flags=[quote_for_host -DFOO=BAR + 10]
+ ...
+
+ Tested on x86_64-linux.
+
+2023-03-27 Tom de Vries <tdevries@suse.de>
+
+ [gdb/testsuite] Fix have_index for remote host
+ Proc have_index is mostly used with $binfile, which gives problems
+ for remote host.
+
+ Fix this by using "file tail" on the proc argument.
+
+ Tested on x86_64-linux.
+
+2023-03-27 Tom de Vries <tdevries@suse.de>
+
+ [gdb/testsuite] Add missing include_file in gdb.dwarf/*.exp
+
+2023-03-27 Tom de Vries <tdevries@suse.de>
+
+ [gdb/testsuite] Add test-case gdb.dlang/dlang-start-2.exp
+ For test-case gdb.dlang/dlang-start.exp, I run into:
+ ...
+ UNSUPPORTED: gdb.dlang/dlang-start.exp: require failed: can_compile d
+ ...
+
+ My distro has no support for gdc, but I'd like to have the test-case
+ running and passing, so let's rewrite the test-case using dwarf assembly
+ and add it alongside (rather than replacing it, because it's good to use
+ actual compiler output if we have it available).
+
+ My distro does have a package providing dmd, so let's mimic that debug info in
+ the dwarf assembly. This gives us:
+ ...
+ (gdb) start ^M
+ Temporary breakpoint 1 at 0x4004ab^M
+ Starting program: dlang-start-2 ^M
+ ^M
+ Temporary breakpoint 1, 0x00000000004004ab in _Dmain ()^M
+ ...
+
+ The "_Dmain ()" should probably be "D main", I've filed PR30276 about that.
+
+ Also add a "show language" to check that we automatically set the language
+ correctly to D.
+
+ Note that the dwarf assembly also describes main, otherwise the test-case
+ doesn't function as regression test for commit 47fe57c9281 ("Fix "start" for
+ D, Rust, etc").
+
+ Tested on x86_64-linux.
+
+2023-03-27 Alan Modra <amodra@gmail.com>
+
+ Tidy tc-ppc.c XCOFF auxent access
+ It's better not to drill down into u.auxent but instead use a pointer
+ to the combined_entry_type. That way the fix_scnlen field is
+ available, and no one looking at the codes needs to wonder whether
+ coffsymbol (symbol_get_bfdsym (sym))->native[i + 1] is the same
+ auxent.
+
+ * config/tc-ppc.c (ppc_frob_symbol): Tidy XCOFF auxent access.
+ (ppc_adjust_symtab): Likewise.
+
+2023-03-27 Alan Modra <amodra@gmail.com>
+
+ Remove coff_pointerize_aux table_end param
+ I'm fairly certain the table_end checks are redundant now. This
+ patch reverts commit 334d4ced42d3.
+
+ * coffgen.c (coff_pointerize_aux): Remove table_end parameter.
+ (coff_get_normalized_symtab): Adjust to suit.
+
+2023-03-27 Alan Modra <amodra@gmail.com>
+
+ Use stdint types in coff internal_auxent
+ long is a poor choice of type to store 32-bit values read from
+ objects files by H_GET_32. H_GET_32 doesn't sign extend so tests like
+ that in gdb/coffread.c for "negative" values won't work if long is
+ larger than 32 bits. If long is 32-bit then code needs to be careful
+ to not accidentally index negative array elements. (I'd rather see a
+ segfault on an unmapped 4G array index than silently reading bogus
+ data.) long is also a poor choice for x_sect.s_scnlen, which might
+ have 64-bit values. It's better to use unsigned exact width types to
+ avoid surprises.
+
+ I decided to change the field names too, which makes most of this
+ patch simply renaming. Besides that there are a few places where
+ casts are no longer needed, and where printf format strings or tests
+ need adjusting.
+
+ include/
+ * coff/internal.h (union internal_auxent): Use unsigned stdint
+ types. Rename l fields to u32 and u64 as appropriate.
+ bfd/
+ * coff-bfd.c,
+ * coff-rs6000.c,
+ * coff64-rs6000.c,
+ * coffcode.h,
+ * coffgen.c,
+ * cofflink.c,
+ * coffswap.h,
+ * peXXigen.c,
+ * xcofflink.c: Adjust to suit internal_auxent changes.
+ binutils/
+ * rdcoff.c: Adjust to suit internal_auxent changes.
+ gas/
+ * config/obj-coff.h,
+ * config/tc-ppc.c: Adjust to suit internal_auxent changes.
+ gdb/
+ * coffread.c,
+ * xcoffread.c: Adjust to suit internal_auxent changes.
+ ld/
+ * pe-dll.c: Adjust to suit internal_auxent changes.
+
+2023-03-27 Alan Modra <amodra@gmail.com>
+
+ Set proper union selector tag
+ * coff-bfd.c (bfd_coff_get_auxent): After converting sym pointer
+ to an index, reset the union tag.
+
+2023-03-27 Alan Modra <amodra@gmail.com>
+
+ coffgrok access of u.auxent.x_sym.x_tagndx.p
+ u.auxent.x_sym.x_tagndx is a union. The p field is only valid when
+ fix_tag is set. This patch fixes code in coffgrok.c that accessed the
+ field without first checking fix_tag, and removes a whole lot of code
+ validating bogus pointers to prevent segfaults (which no longer
+ happen, I checked the referenced PR 17512 testcases). The patch also
+ documents this in the fix_tag comment, makes is_sym a bitfield, and
+ sorts the selecter fields a little.
+
+ bfd/
+ * coffcode.h (combined_entry_type): Make is_sym a bitfield.
+ Sort and comment on union selectors.
+ * libcoff.h: Regenerate.
+ binutils/
+ * coffgrok.c (do_type): Make aux a combined_entry_type. Test
+ fix_tag before accessing u.auxent.x_sym.x_tagndx.p. Remove
+ now unnecessary pointer bounds checking.
+
+2023-03-27 Alan Modra <amodra@gmail.com>
+
+ Duplicate DW_AT_call_file leak
+ When given two or more DW_AT_call_file for a given function we
+ currently leak the concat memory.
+
+ * dwarf2.c (scan_unit_for_symbols): Don't leak on duplicate
+ DW_AT_call_file.
+
+2023-03-27 Alan Modra <amodra@gmail.com>
+
+ XCOFF sanity check
+ * coffcode.h (coff_pointerize_aux_hook): Sanity check
+ x_csect.x_scnlen against raw_syment_count.
+
+2023-03-27 Nick Clifton <nickc@redhat.com>
+
+ Add an option to the gold linker to put its version string into the .comment section.
+ PR 30187
+ * options.h (class General_options): Add enable-linker-version.
+ * layout.cc (Layout::create_gold_note): If linker-version is enabled put the version string into the .comment section.
+
+2023-03-27 Tom de Vries <tdevries@suse.de>
+
+ [gdb/testsuite] Handle missing gdc in gdb.dlang/dlang-start.exp
+ On openSUSE Leap 15.4, I get:
+ ...
+ Running gdb.dlang/dlang-start.exp ...
+ gdb compile failed, default_target_compile: Can't find gdc.
+ UNTESTED: gdb.dlang/dlang-start.exp: failed to prepare
+ ...
+
+ Fix this by:
+ - introducing a new proc can_compile, and
+ - requiring "can_compile d" in the test-case,
+ such that I have instead:
+ ...
+ Running gdb.dlang/dlang-start.exp ...
+ UNSUPPORTED: gdb.dlang/dlang-start.exp: require failed: can_compile d
+ ...
+
+ Tested on x86_64-linux, on openSUSE Leap 15.4 and Fedora 37.
+
+2023-03-27 Tom de Vries <tdevries@suse.de>
+
+ [gdb/testsuite] Remove superfluous pid in temp files
+ While trying to use gdb_can_simple_compile with a d program, I ran into:
+ ...
+ /data/vries/gdb/f37/build/gdb/testsuite/temp/105856/can_compile_d-105856.d: \
+ error: module 'can_compile_d-105856' has non-identifier characters in \
+ filename, use module declaration instead
+ ...
+
+ The d compiler has a problem with the filename can_compile_d-105856.d, which
+ contains the pid. The pid is added by gdb_simple_compile:
+ ...
+ set obj [standard_temp_file $name-[pid].$postfix]
+ ...
+ but it's unnecessary because standard_temp_file already uses the pid.
+
+ Fix this by removing "[pid]" in all calls to standard_temp_file.
+
+ Tested on x86_64-linux.
+
+2023-03-27 GDB Administrator <gdbadmin@sourceware.org>
+
+ Automatic date update in version.in
+
+2023-03-26 Tom de Vries <tdevries@suse.de>
+
+ [gdb/testsuite] Introduce allow_dap_tests
+ Simon pointed out that with gdb.dap/*.exp and target board
+ native-gdbserver, we run into problems.
+
+ I see for each test-case:
+ ...
+ +++ run
+ Traceback (most recent call last):
+ File "startup.py", line 146, in exec_and_log
+ output = gdb.execute(cmd, from_tty=True, to_string=True)
+ gdb.error: Don't know how to run. Try "help target".
+ ...
+
+ Likewise with target board native-extended-gdbserver.
+
+ Fix this by:
+ - adding a new proc allow_dap_tests,
+ - using it in all the gdb.dap tests, and
+ - bailing out if GDBFLAGS/INTERNAL_GDBFLAGS contains
+ "set auto-connect-native-target off".
+
+ Tested on x86_64-linux.
+
+ Reported-By: Simon Marchi <simon.marchi@efficios.com>
+ Approved-By: Tom Tromey <tom@tromey.com>
+
+2023-03-26 GDB Administrator <gdbadmin@sourceware.org>
+
+ Automatic date update in version.in
+
+2023-03-25 GDB Administrator <gdbadmin@sourceware.org>
+
+ Automatic date update in version.in
+
+2023-03-24 Tom Tromey <tromey@adacore.com>
+
+ Preserve name of range types
+ The type-allocation patches introduced a small regression that was
+ picked up by the AdaCore internal test suite. Previously, the name of
+ a range type was preserved by resolve_dynamic_range, but now it is
+ not. This patch changes this code to preserve the name.
+
+ Reviewed-By: Bruno Larsen <blarsen@redhat.com>
+
+2023-03-24 Tom Tromey <tromey@adacore.com>
+
+ Implement repl evaluation for DAP
+ The evaluate command supports a "context" parameter which tells the
+ adapter the context in which an evaluation occurs. One of the
+ supported values is "repl", which we took to mean evaluation of a gdb
+ command. That is what this patch implements.
+
+ Note that some gdb commands probably will not work correctly with the
+ rest of the protocol. For example if the user types "continue",
+ confusion may result.
+
+ This patch requires the earlier patch to fix up scopes in DAP.
+
+2023-03-24 Tom de Vries <tdevries@suse.de>
+
+ [gdb/symtab] Fix line number of static const class member
+ Since commit 6d263fe46e0 ("Avoid bad breakpoints with --gc-sections"), there
+ was a silent regression on openSUSE Leap 15.4 for test-case
+ gdb.cp/m-static.exp, from:
+ ...
+ (gdb) info variable everywhere^M
+ All variables matching regular expression "everywhere":^M
+ ^M
+ File /home/vries/tmp.local-remote-host-native/m-static.h:^M
+ 8: const int gnu_obj_4::everywhere;^M
+ (gdb)
+ ...
+ to:
+ ...
+ (gdb) info variable everywhere^M
+ All variables matching regular expression "everywhere":^M
+ ^M
+ File /data/vries/gdb/src/gdb/testsuite/gdb.cp/m-static.h:^M
+ 8: const int gnu_obj_4::everywhere;^M
+ ^M
+ File /data/vries/gdb/src/gdb/testsuite/gdb.cp/m-static1.cc:^M
+ 8: const int gnu_obj_4::everywhere;^M
+ (gdb)
+ ...
+
+ Another regression was found due to that commit, and it was fixed in commit
+ 99d679e7b30 ("[gdb/symtab] Fix "file index out of range" complaint") by
+ limiting the scope of the fix in the original commit.
+
+ Fix this regression by yet further limiting the scope of that fix, making sure
+ that this bit in dwarf_decode_lines is executed again for m-static1.cc:
+ ...
+ /* Make sure a symtab is created for every file, even files
+ which contain only variables (i.e. no code with associated
+ line numbers). */
+ ...
+
+ Tested on x86_64-linux.
+
+ PR symtab/30265
+ Bug: https://sourceware.org/bugzilla/show_bug.cgi?id=30265
+
+2023-03-24 Nick Alcock <nick.alcock@oracle.com>
+
+ libctf: get the offsets of fields of unnamed structs/unions right
+ We were failing to add the offsets of the containing struct/union
+ in this case, leading to all offsets being relative to the unnamed
+ struct/union itself.
+
+ libctf/
+ PR libctf/30264
+ * ctf-types.c (ctf_member_info): Add the offset of the unnamed
+ member of the current struct as necessary.
+ * testsuite/libctf-lookup/unnamed-field-info*: New test.
+
+2023-03-24 Nick Alcock <nick.alcock@oracle.com>
+
+ libctf: fix a comment typo
+ ctf_dedup's intern() function does not return a dynamically allocated
+ string, so I just spent ten minutes auditing for obvious memory leaks
+ that couldn't actually happen. Update the comment to note what it
+ actually returns (a pointer into an atoms table: i.e. possibly not
+ a new string, and not so easily leakable).
+
+ libctf/
+ * ctf-dedup.c (intern): Update comment.
+
+2023-03-24 Nick Alcock <nick.alcock@oracle.com>
+
+ libctf: work around an uninitialized variable warning
+ GCC 11+ complains that sym is uninitialized in ctf_symbol_next. It
+ isn't, but it's not quite smart enough to figure that out (it requires
+ domain-specific knowledge of the state of the ctf_next_t iterator
+ over multiple calls).
+
+ libctf/
+ * ctf-lookup.c (ctf_symbol_next): Initialize sym to a suitable
+ value for returning if never reset during the function.
+
+2023-03-24 Nick Alcock <nick.alcock@oracle.com>
+
+ libctf: fix assertion failure with no system qsort_r
+ If no suitable qsort_r is found in libc, we fall back to an
+ implementation in ctf-qsort.c. But this implementation routinely calls
+ the comparison function with two identical arguments. The comparison
+ function that ensures that the order of output types is stable is not
+ ready for this, misinterprets it as a type appearing more that once (a
+ can-never-happen condition) and fails with an assertion failure.
+
+ Fixed, audited for further instances of the same failure (none found)
+ and added a no-qsort test to my regular testsuite run.
+
+ libctf/:
+ PR libctf/30013
+ * ctf-dedup.c (sort_output_mapping): Inputs are always equal to
+ themselves.
+
+2023-03-24 Tom Tromey <tromey@adacore.com>
+
+ Fix race in DAP startup
+ Internal AdaCore DAP testing on Windows has had occasional failures
+ that show:
+
+ assert threading.current_thread() is _dap_thread
+
+ I think this is a race in DAP startup: the _dap_thread global is only
+ set on return from start_thread, but it seems possible that the thread
+ itself could already run and encounter a @in_dap_thread decorator.
+
+ This patch fixes the problem by setting the global before running any
+ of the code in the new thread. This also lets us remove a FIXME.
+
+2023-03-24 Luis Machado <luis.machado@arm.com>
+
+ aarch64: Check for valid inferior thread/regcache before reading pauth registers
+ There were reports of gdb throwing internal errors when calling
+ inferior_thread ()/get_current_regcache () on a system with
+ Pointer Authentication enabled.
+
+ In such cases, gdb produces the following backtrace:
+
+ ../../../repos/binutils-gdb/gdb/thread.c:86: internal-error: inferior_thread: Assertion `current_thread_ != nullptr' failed.
+ A problem internal to GDB has been detected,
+ further debugging may prove unreliable.
+ ----- Backtrace -----
+ 0xaaaae04a571f gdb_internal_backtrace_1
+ ../../../repos/binutils-gdb/gdb/bt-utils.c:122
+ 0xaaaae04a57f3 _Z22gdb_internal_backtracev
+ ../../../repos/binutils-gdb/gdb/bt-utils.c:168
+ 0xaaaae0b52ccf internal_vproblem
+ ../../../repos/binutils-gdb/gdb/utils.c:401
+ 0xaaaae0b5310b _Z15internal_verrorPKciS0_St9__va_list
+ ../../../repos/binutils-gdb/gdb/utils.c:481
+ 0xaaaae0e24b8f _Z18internal_error_locPKciS0_z
+ ../../../repos/binutils-gdb/gdbsupport/errors.cc:58
+ 0xaaaae0a88983 _Z15inferior_threadv
+ ../../../repos/binutils-gdb/gdb/thread.c:86
+ 0xaaaae0956c87 _Z20get_current_regcachev
+ ../../../repos/binutils-gdb/gdb/regcache.c:428
+ 0xaaaae035223f aarch64_remove_non_address_bits
+ ../../../repos/binutils-gdb/gdb/aarch64-tdep.c:3572
+ 0xaaaae03e8abb _Z31gdbarch_remove_non_address_bitsP7gdbarchm
+ ../../../repos/binutils-gdb/gdb/gdbarch.c:3109
+ 0xaaaae0a692d7 memory_xfer_partial
+ ../../../repos/binutils-gdb/gdb/target.c:1620
+ 0xaaaae0a695e3 _Z19target_xfer_partialP10target_ops13target_objectPKcPhPKhmmPm
+ ../../../repos/binutils-gdb/gdb/target.c:1684
+ 0xaaaae0a69e9f target_read_partial
+ ../../../repos/binutils-gdb/gdb/target.c:1937
+ 0xaaaae0a69fdf _Z11target_readP10target_ops13target_objectPKcPhml
+ ../../../repos/binutils-gdb/gdb/target.c:1977
+ 0xaaaae0a69937 _Z18target_read_memorymPhl
+ ../../../repos/binutils-gdb/gdb/target.c:1773
+ 0xaaaae08be523 ps_xfer_memory
+ ../../../repos/binutils-gdb/gdb/proc-service.c:90
+ 0xaaaae08be6db ps_pdread
+ ../../../repos/binutils-gdb/gdb/proc-service.c:124
+ 0x40001ed7c3b3 _td_fetch_value
+ /build/glibc-RIFKjK/glibc-2.31/nptl_db/fetch-value.c:115
+ 0x40001ed791ef td_ta_map_lwp2thr
+ /build/glibc-RIFKjK/glibc-2.31/nptl_db/td_ta_map_lwp2thr.c:194
+ 0xaaaae07f4473 thread_from_lwp
+ ../../../repos/binutils-gdb/gdb/linux-thread-db.c:413
+ 0xaaaae07f6d6f _ZN16thread_db_target4waitE6ptid_tP17target_waitstatus10enum_flagsI16target_wait_flagE
+ ../../../repos/binutils-gdb/gdb/linux-thread-db.c:1420
+ 0xaaaae0a6b33b _Z11target_wait6ptid_tP17target_waitstatus10enum_flagsI16target_wait_flagE
+ ../../../repos/binutils-gdb/gdb/target.c:2586
+ 0xaaaae0789cf7 do_target_wait_1
+ ../../../repos/binutils-gdb/gdb/infrun.c:3825
+ 0xaaaae0789e6f operator()
+ ../../../repos/binutils-gdb/gdb/infrun.c:3884
+ 0xaaaae078a167 do_target_wait
+ ../../../repos/binutils-gdb/gdb/infrun.c:3903
+ 0xaaaae078b0af _Z20fetch_inferior_eventv
+ ../../../repos/binutils-gdb/gdb/infrun.c:4314
+ 0xaaaae076652f _Z22inferior_event_handler19inferior_event_type
+ ../../../repos/binutils-gdb/gdb/inf-loop.c:41
+ 0xaaaae07dc68b handle_target_event
+ ../../../repos/binutils-gdb/gdb/linux-nat.c:4206
+ 0xaaaae0e25fbb handle_file_event
+ ../../../repos/binutils-gdb/gdbsupport/event-loop.cc:573
+ 0xaaaae0e264f3 gdb_wait_for_event
+ ../../../repos/binutils-gdb/gdbsupport/event-loop.cc:694
+ 0xaaaae0e24f9b _Z16gdb_do_one_eventi
+ ../../../repos/binutils-gdb/gdbsupport/event-loop.cc:217
+ 0xaaaae080f033 start_event_loop
+ ../../../repos/binutils-gdb/gdb/main.c:411
+ 0xaaaae080f1b7 captured_command_loop
+ ../../../repos/binutils-gdb/gdb/main.c:475
+ 0xaaaae0810b97 captured_main
+ ../../../repos/binutils-gdb/gdb/main.c:1318
+ 0xaaaae0810c1b _Z8gdb_mainP18captured_main_args
+ ../../../repos/binutils-gdb/gdb/main.c:1337
+ 0xaaaae0338453 main
+ ../../../repos/binutils-gdb/gdb/gdb.c:32
+ ---------------------
+ ../../../repos/binutils-gdb/gdb/thread.c:86: internal-error: inferior_thread: Assertion `current_thread_ != nullptr' failed.
+ A problem internal to GDB has been detected,
+ further debugging may prove unreliable.
+ Quit this debugging session? (y or n)
+
+ We also see failures across the testsuite if the tests get executed on a target
+ that has native support for the pointer authentication feature. But
+ gdb.base/break.exp and gdb.base/access-mem-running.exp are two examples of
+ tests that run into errors and internal errors.
+
+ This issue started after commit d88cb738e6a7a7179dfaff8af78d69250c852af1, which
+ enabled more broad use of pointer authentication masks to remove non-address
+ bits of pointers, but wasn't immediately detected because systems with native
+ support for pointer authentication are not that common yet.
+
+ The above crash happens because gdb is in the middle of handling an event,
+ and do_target_wait_1 calls switch_to_inferior_no_thread, nullifying the
+ current thread. This means a call to inferior_thread () will assert, and
+ attempting to call get_current_regcache () will also call inferior_thread (),
+ resulting in an assertion as well.
+
+ target_has_registers was one function that seemed useful for detecting these
+ types of situation where we don't have a register cache. The problem with that
+ is the inconsistent state of inferior_ptid, which is used by
+ target_has_registers.
+
+ Despite the call to switch_to_no_thread in switch_to_inferior_no_thread from
+ do_target_wait_1 in the backtrace above clearing inferior_ptid, the call to
+ ps_xfer_memory sets inferior_ptid momentarily before reading memory:
+
+ static ps_err_e
+ ps_xfer_memory (const struct ps_prochandle *ph, psaddr_t addr,
+ gdb_byte *buf, size_t len, int write)
+ {
+ scoped_restore_current_inferior restore_inferior;
+ set_current_inferior (ph->thread->inf);
+
+ scoped_restore_current_program_space restore_current_progspace;
+ set_current_program_space (ph->thread->inf->pspace);
+
+ scoped_restore save_inferior_ptid = make_scoped_restore (&inferior_ptid);
+ inferior_ptid = ph->thread->ptid;
+
+ CORE_ADDR core_addr = ps_addr_to_core_addr (addr);
+
+ int ret;
+ if (write)
+ ret = target_write_memory (core_addr, buf, len);
+ else
+ ret = target_read_memory (core_addr, buf, len);
+ return (ret == 0 ? PS_OK : PS_ERR);
+ }
+
+ Maybe this shouldn't happen, or maybe it is just an unfortunate state to be
+ in. But this prevents the use of target_has_registers to guard against the
+ lack of registers, since, although current_thread_ is still nullptr,
+ inferior_ptid is valid and is not null_ptid.
+
+ There is another crash scenario after we kill a previously active inferior, in
+ which case the gdbarch will still say we support pointer authentication but we
+ will also have no current thread (inferior_thread () will assert etc).
+
+ If the target has support for pointer authentication, gdb needs to use
+ a couple (or 4, for bare-metal) mask registers to mask off some bits of
+ pointers, and for that it needs to access the registers.
+
+ At some points, like the one from the backtrace above, there is no active
+ thread/current regcache because gdb is in the middle of doing event handling
+ and switching between threads.
+
+ Simon suggested the use of inferior_ptid to fetch the register cache, as
+ opposed to relying on the current register cache. Though we need to make sure
+ inferior_ptid is valid (not null_ptid), I think this works nicely.
+
+ With inferior_ptid, we can do safety checks along the way, making sure we have
+ a thread to fetch a register cache from and checking if the thread is actually
+ stopped or running.
+
+ The following patch implements this idea with safety checks to make sure we
+ don't run into assertions or errors. If any of the checks fail, we fallback to
+ using a default mask to remove non-address bits of a pointer.
+
+ I discussed with Pedro the possibility of caching the mask register values
+ (which are per-process and can change mid-execution), but there isn't a good
+ spot to cache those values. Besides, the mask registers can change constantly
+ for bare-metal debugging when switching between exception levels.
+
+ In some cases, it is just not possible to get access to these mask registers,
+ like the case where threads are running. In those cases, using a default mask
+ to remove the non-address bits should be enough.
+
+ This can happen when we let threads run in the background and then we attempt
+ to access a memory address (now that gdb is capable of reading memory even
+ with threads running). Thus gdb will attempt to remove non-address bits
+ of that memory access, will attempt to access registers, running into errors.
+
+ Regression-tested on aarch64-linux Ubuntu 20.04.
+
+2023-03-24 Alan Modra <amodra@gmail.com>
+
+ Tidy string_ptr increment
+ * peicode.h (pe_ILF_make_a_symbol): Use sprintf output to
+ increment string_ptr to end of new string.
+
+ Tidy dwarf1 cached section contents
+ * dwarf1.c (_bfd_dwarf1_cleanup_debug_info): New function.
+ * libbfd-in.h (_bfd_dwarf1_cleanup_debug_info): Declare.
+ * elf.c (_bfd_elf_close_and_cleanup): Call it.
+ * elf-bfd.h (struct elf_obj_tdata): Make dwarf1_find_line_info
+ a void*.
+ * libbfd.h: Regenerate.
+
+2023-03-24 Tom de Vries <tdevries@suse.de>
+
+ [gdb/testsuite] Fix unbalanced quotes in mi_expect_stop argument
+ In proc mi_expect_stop there's a proc argument reason that's handled like so:
+ ...
+ set r "reason=\"$reason\","
+ ...
+
+ That's fine for say:
+ ...
+ set reason "foo"
+ ...
+ for which this evaluates to:
+ ...
+ set r "reason=\"foo\","
+ ...
+
+ But there are more complex uses, for instance:
+ ...
+ set reason "breakpoint-hit\",disp=\"keep\",bkptno=\"$decimal"
+ ...
+ which evaluates to:
+ ...
+ set r "\"breakpoint-hit\",disp=\"keep\",bkptno=\"$decimal\""
+ ...
+
+ Note how in this reason argument, the first two '\"' seems to form a pair
+ surrounding ',disp=', which is not the case, which is confusing.
+
+ Fix this by only adding the quotes in mi_expect_stop if the string doesn't
+ already contain quotes, such that we have the more readable:
+ ...
+ set reason "\"breakpoint-hit\",disp=\"keep\",bkptno=\"$decimal\""
+ ...
+
+ Tested on x86_64-linux.
+
+2023-03-24 Tom de Vries <tdevries@suse.de>
+
+ [gdb/testsuite] Fix gdb.cp/m-static.exp regression on Ubuntu 20.04
+ In commit 722c4596034 ("[gdb/testsuite] Fix gdb.cp/*.exp for remote host"), I
+ needed to change ".*/" into "(.*/)?" in:
+ ...
+ gdb_test "info variable everywhere" \
+ "File .*/m-static\[.\]h.*const int gnu_obj_4::everywhere;"
+ ...
+
+ However, due to the fact that I got this output:
+ ...
+ (gdb) info variable everywhere^M
+ All variables matching regular expression "everywhere":^M
+ ^M
+ File /data/vries/gdb/src/gdb/testsuite/gdb.cp/m-static.h:^M
+ 8: const int gnu_obj_4::everywhere;^M
+ ^M
+ File /data/vries/gdb/src/gdb/testsuite/gdb.cp/m-static1.cc:^M
+ 8: const int gnu_obj_4::everywhere;^M
+ ...
+ I decided to make the matching somewhat stricter, to make sure that the two
+ matched lines were subsequent.
+
+ The commit turned out to be more strict than intended, and caused a regression
+ on Ubuntu 20.04, where the output was instead:
+ ...
+ (gdb) info variable everywhere^M
+ All variables matching regular expression "everywhere":^M
+ ^M
+ File /data/vries/gdb/src/gdb/testsuite/gdb.cp/m-static.h:^M
+ 8: const int gnu_obj_4::everywhere;^M
+ ...
+
+ At that point I realized I'm looking at a bug (filed as PR symtab/30265),
+ which manifests on openSUSE Leap 15.4 for native and readnow, and on Ubuntu
+ 20.04 for readnow, but not for native.
+
+ Before my commit, the test-case passed whether the bug manifested or not.
+
+ After my commit, the test-case only passed when the bug manifested.
+
+ Fix the test-case regression by reverting to the situation before the commit:
+ pass whether the bug manifests or not. We could add an xfail for the PR, but
+ I'm expecting a fix soon, so that doesn't look worth the effort.
+
+ Tested on x86_64-linux, both on openSUSE Leap 15.4 and Ubuntu 20.04, both with
+ native and readnow.
+
+ Reported-By: Simon Marchi <simon.marchi@efficios.com>
+
+2023-03-24 Tom de Vries <tdevries@suse.de>
+
+ [gdb/dap] Add logging of ignored lines
+ This input sequence is accepted by DAP:
+ ...
+ {"seq": 4, "type": "request", "command": "configurationDone"}Content-Length: 84
+ ...
+
+ This input sequence has the same effect:
+ ...
+ {"seq": 4, "type": "request", "command": "configurationDone"}ignorethis
+ Content-Length: 84
+ ...
+ but the 'ignorethis' part is silently ignored.
+
+ Log the ignored bit, such that we have:
+ ...
+ READ: <<<{"seq": 4, "type": "request", "command": "configurationDone"}>>>
+ WROTE: <<<{"request_seq": 4, "type": "response", "command": "configurationDone"
+ , "success": true}>>>
+ +++ run
+ IGNORED: <<<b'ignorethis'>>>
+ ...
+
+2023-03-24 GDB Administrator <gdbadmin@sourceware.org>
+
+ Automatic date update in version.in
+
+2023-03-23 Tom Tromey <tromey@adacore.com>
+
+ Fix minor grammar issue in python.texi
+ I noticed a minor grammar problem in the 'GDB/MI Commands In Python'
+ node of the manual. I'm checking in this patch to correct it.
+
+2023-03-23 Frederic Cambus <fred@statdns.com>
+
+ Add support to readelf for the PT_OPENBSD_MUTABLE segment type.
+ binutils * readelf.c (get_segment_type): Handle PT_OPENBSD_MUTABLE segment type.
+ include * elf/common.h (PT_OPENBSD_MUTABLE): Define.
+
+2023-03-23 Tom de Vries <tdevries@suse.de>
+
+ [gdb/testsuite] Use gdb_remote_download in allow_opencl_tests
+ Simon reported that doing:
+ ...
+ $ while make check-parallel TESTS='gdb.opencl/*.exp' -j 100; do true; done
+ ...
+ could run into:
+ ...
+ ERROR: remote_download to target of \
+ /data/vries/gdb/src/gdb/testsuite/lib/opencl_kernel.cl to opencl_kernel.cl: \
+ cp: cannot create regular file 'opencl_kernel.cl': File exists
+ ...
+
+ Fix this by using gdb_remote_download (instead of plain remote_download) in
+ allow_opencl_test, which takes care of:
+ - downloading to a location which is safe for parallel testing, by
+ using standard_output_file, and
+ - cleaning up the downloaded file, meaning we can remove the corresponding
+ "remote_file target delete ${clprogram}" lines in allow_opencl_test.
+
+ Tested on x86_64-linux.
+
+ Reported-by: Simon Marchi <simon.marchi@efficios.com>
+
+2023-03-23 Szabolcs Nagy <szabolcs.nagy@arm.com>
+
+ bfd: aarch64: Optimize BTI stubs PR30076
+ Don't insert a second stub if the target is already compatible with
+ an indirect branch.
+
+2023-03-23 Szabolcs Nagy <szabolcs.nagy@arm.com>
+
+ bfd: aarch64: Fix stubs that may break BTI PR30076
+ Insert two stubs in a BTI enabled binary when fixing long calls: The
+ first is near the call site and uses an indirect jump like before,
+ but it targets the second stub that is near the call target site and
+ uses a direct jump.
+
+ This is needed when a single stub breaks BTI compatibility.
+
+ The stub layout is kept fixed between sizing and building the stubs,
+ so the location of the second stub is known at build time, this may
+ introduce padding between stubs when those are relaxed. Stub layout
+ with BTI disabled is unchanged.
+
+2023-03-23 Szabolcs Nagy <szabolcs.nagy@arm.com>
+
+ bfd: aarch64: Refactor stub sizing code
+ elfNN_aarch64_size_stubs has grown big, so factor out the call stub
+ related code before adding new logic there.
+
+2023-03-23 Andrew Burgess <aburgess@redhat.com>
+
+ gdb/riscv: add systemtap support
+ This commit is initial support for SystemTap for RISC-V Linux. The
+ following two tests exercise SystemTap functionality, and are showing
+ many failures, which are all fixed by this commit:
+
+ gdb.cp/exceptprint.exp
+ gdb.base/stap-probe.exp
+
+ One thing I wasn't sure about is if the SystemTap support should be
+ Linux specific, or architecture specific. For aarch64, arm, ia64, and
+ ppc, the SystemTap support seems to libe in the ARCH-linux-tdep.c
+ file, while for amd64, i386, and s390 the implementation lives in
+ ARCH-tdep.c. I have no idea which of these is the better choice -- or
+ maybe both choices are correct in the right circumstances, and I'm
+ just not aware of how to choose between them.
+
+ Anyway, for this patch I selected riscv-tdep.c (though clearly, moving
+ the changes to riscv-linux-tdep.c is trivial if anyone thinks that's a
+ more appropriate location).
+
+ The stap-probe.exp file tests immediate, register, and register
+ indirect operands, all of which appear to be working fine with this
+ commit. The generic expression support doesn't appear to be
+ architecture specific, so I'd expect that to work fine too.
+
+2023-03-23 GDB Administrator <gdbadmin@sourceware.org>
+
+ Automatic date update in version.in
+
+2023-03-22 Andrew Burgess <aburgess@redhat.com>
+
+ gdb: remove gdbarch_displaced_step_fixup_p
+ The comment on the gdbarch_displaced_step_fixup gdbarch method
+ indicates that this method is optional and that GDB will perform some
+ default if this method is not supplied. As such we define a predicate
+ gdbarch_displaced_step_fixup_p.
+
+ It may have been true at one point that the fixup method was optional,
+ but it is no longer true. If this method is not defined and GDB tries
+ to complete a displaced step, then GDB is going to crash.
+
+ Additionally the gdbarch_displaced_step_fixup_p predicate is not used
+ anywhere in GDB.
+
+ In this commit I have removed the gdbarch_displaced_step_fixup_p
+ predicate, and I have updated the validation check for the
+ gdbarch_displaced_step_fixup method; if the
+ gdbarch_displaced_step_copy_insn method is defined then the fixup
+ method must also be defined.
+
+ I believe I've manually checked all the current places where
+ gdbarch_displaced_step_copy_insn is defined and they all also define
+ the fixup method, so this change should cause no problems for anyone.
+
+ There should be no user visible changes after this commit.
+
+ Approved-By: Pedro Alves <pedro@palves.net>
+
+2023-03-22 Tom Tromey <tromey@adacore.com>
+
+ Remove unnecessary cast
+ I found an upcast from template_symbol to symbol. This was necessary
+ long ago, but since symbols use inheritance now, it is not. This
+ patch removes it. Tested by rebuilding.
+
+2023-03-22 Simon Marchi <simon.marchi@polymtl.ca>
+
+ gdb/testsuite: adjust test cases to previous "maintenance info line-table" change
+ Commit 904d9b02a185 ("gdb: make "maintenance info line-table" show
+ relocated addresses again") changed the format of that command, but
+ failed to adjust some test cases that relied on it. This patch fixes
+ it.
+
+ The failures fixed are:
+
+ FAIL: gdb.base/maint.exp: maint info line-table w/o a file name
+ FAIL: gdb.dwarf2/dw2-out-of-range-end-of-seq.exp: END with address 1 eliminated
+ FAIL: gdb.dwarf2/dw2-ranges-base.exp: count END markers in line table
+
+ Change-Id: I946580d5e100f1beeac99a9e90d7819c6bb4ac6c
+
+2023-03-22 Tom de Vries <tdevries@suse.de>
+
+ [gdb/testsuite] Fix gdb.cp/cp-relocate.exp for remote host
+ Fix test-case gdb.cp/cp-relocate.exp for remote host using
+ gdb_remote_download.
+
+ Tested on x86_64-linux.
+
+2023-03-22 Tom de Vries <tdevries@suse.de>
+
+ [gdb/testsuite] Fix gdb.cp/annota{2,3}.exp for native-extended-gdbserver
+ When running test-cases gdb.cp/annota{2,3}.exp with target board
+ native-extended-gdbserver, we run into a few FAILs, due to the test-cases
+ trying to match inferior output together with gdb output.
+
+ Fix this by ignoring the inferior output in this case.
+
+ Tested on x86_64-linux.
+
+2023-03-22 Tom de Vries <tdevries@suse.de>
+
+ [gdb/testsuite] Fix gdb.cp/*.exp for remote host
+ Fix a few test-cases in gdb.cp/*.exp for remote host using new proc
+ include_file.
+
+ Tested on x86_64-linux.
+
+2023-03-22 Simon Marchi <simon.marchi@efficios.com>
+
+ gdb: make "maintenance info line-table" show relocated addresses again
+ Commit 1acc9dca423f ("Change linetables to be objfile-independent")
+ changed "maintenance info line-table" to print unrelocated addresses
+ instead of relocated. This breaks a few tests on systems where that
+ matters. The ones I see are:
+
+ Running /home/smarchi/src/binutils-gdb/gdb/testsuite/gdb.base/consecutive.exp ...
+ FAIL: gdb.base/consecutive.exp: stopped at bp, 2nd instr (missing hex prefix)
+ Running /home/smarchi/src/binutils-gdb/gdb/testsuite/gdb.base/async.exp ...
+ FAIL: gdb.base/async.exp: stepi&
+ FAIL: gdb.base/async.exp: nexti&
+ FAIL: gdb.base/async.exp: finish&
+
+ These tests run "maintenance info line-table" to record the address of
+ some lines, and then use these addresses in expected patterns. It
+ therefore expects these addresses to match the runtime addresses,
+ therefore the relocated addresses.
+
+ Add back the relocated addresses, next to the unrelocated addresses,
+ like so:
+
+ INDEX LINE REL-ADDRESS UNREL-ADDRESS IS-STMT PROLOGUE-END
+ 0 6 0x0000555555555119 0x0000000000001119 Y
+ 1 7 0x000055555555511d 0x000000000000111d Y
+ 2 8 0x0000555555555123 0x0000000000001123 Y
+ 3 END 0x0000555555555125 0x0000000000001125 Y
+
+ The unrelocated addresses can always be useful trying to map this
+ information with a DWARF info dump.
+
+ Adjust the is_stmt_addresses proc in the testsuite to match the new
+ output.
+
+ Change-Id: I59558f167e13e63421c9e0f2cad192e7c95c10cf
+
+2023-03-22 Alan Modra <amodra@gmail.com>
+
+ coff_get_normalized_symtab bfd_release
+ We can't free "internal" on errors, since bfd_coff_swap_sym_in may
+ call bfd_alloc. For example, _bfd_XXi_swap_sym_in may even create new
+ sections, which use bfd_alloc'd memory. If "internal" is freed, all
+ more recently bfd_alloc'd memory is also freed.
+
+ * coffgen.c (coff_get_normalized_symtab): Don't bfd_release on
+ error.
+
+2023-03-22 GDB Administrator <gdbadmin@sourceware.org>
+
+ Automatic date update in version.in
+
+2023-03-21 Alan Modra <amodra@gmail.com>
+
+ Remove unnecessary memsets in sframe-dump.c
+ * sframe-dump.c (dump_sframe_func_with_fres): Don't memset temp.
+
+ Sanity check coff-sh and coff-mcore sym string offset
+ * coff-mcore.c (coff_mcore_relocate_section): Sanity check sym
+ string offset when setting up name for use by error messages.
+ * coff-sh.c (sh_relocate_section): Likewise.
+
+2023-03-21 Alan Modra <amodra@gmail.com>
+
+ PR17910 sym string offset check
+ As far as I can see the only place that sets obj_coff_strings without
+ setting obj_coff_strings_len is pe_ILF_build_a_bfd. Fix that and we
+ can simplify the sym string offset check. This is just a tidy.
+ pe_ILF_build_a_bfd doesn't create bad symbols and
+ _bfd_coff_read_string_table will always result in non-zero
+ obj_coff_strings_len when obj_coff_strings is non-NULL.
+
+ PR 17910
+ * coffgen.c (_bfd_coff_internal_syment_name): Always sanity
+ check sym string offset.
+ * peicode.h (pe_ILF_build_a_bfd): Set obj_coff_strings_len.
+
+2023-03-21 Alan Modra <amodra@gmail.com>
+
+ PE fake section for C_SECTION syms
+ It's an odd thing to have objdump -x show a different section table
+ to objdump -h, but that can happen if swapping in symbols leads to
+ creating sections. Setting SEC_LINKER_CREATED stops the display of
+ these sections, so that you get shown what is in the object file.
+
+ * peXXigen.c (_bfd_XXi_swap_sym_in): Set SEC_LINKER_CREATED on
+ fake section created for C_SECTION syms. Don't zero asection
+ fields that are already zero.
+
+2023-03-21 Alan Modra <amodra@gmail.com>
+
+ XCOFF: use bfd_coff_close_and_cleanup
+ Free memory on closing bfds. The COFF close_and_cleanup does more
+ work than _bfd_generic_close_and_cleanup (defined as
+ _bfd_archive_close_and_cleanup).
+
+ * coff-rs6000.c (_bfd_xcoff_close_and_cleanup): Define as
+ _bfd_coff_close_and_cleanup.
+ * coff64-rs6000.c (rs6000_xcoff64_vec, rs6000_xcoff64_aix_vec): Use
+ _bfd_coff_close_and_cleanup.
+
+2023-03-21 Alan Modra <amodra@gmail.com>
+
+ gas: expand_irp memory leaks
+ * macro.c (expand_irp): Free memory on error return paths.
+
+2023-03-21 H.J. Lu <hjl.tools@gmail.com>
+
+ x86: Check unbalanced braces in memory reference
+ Check unbalanced braces in memory reference to avoid assembler crash
+ caused by
+
+ commit e87fb6a6d0cdfc0e9c471b7825c20c238c2cf506
+ Author: Jan Beulich <jbeulich@suse.com>
+ Date: Wed Oct 5 09:16:24 2022 +0200
+
+ x86/gas: support quoted address scale factor in AT&T syntax
+
+ PR gas/30248
+ * config/tc-i386.c (i386_att_operand): Check unbalanced braces
+ in memory reference.
+ * testsuite/gas/i386/i386.exp: Run pr30248.
+ * testsuite/gas/i386/pr30248.d: New file.
+ * testsuite/gas/i386/pr30248.err: Likewise.
+ * testsuite/gas/i386/pr30248.s: Likewise.
+
+2023-03-21 Carl Love <cel@us.ibm.com>
+
+ PowerPC: regression fix for reverse-finish command.
+ The recent commit:
+
+ commit 2a8339b71f37f2d02f5b2194929c9d702ef27223
+ Author: Carl Love <cel@us.ibm.com>
+ Date: Thu Mar 9 16:10:18 2023 -0500
+
+ PowerPC: fix for gdb.reverse/finish-precsave.exp and gdb.reverse/finish-reverse.exp
+
+ PPC64 multiple entry points, a normal entry point and an alternate entry
+ point. The alternate entry point is to setup the Table of Contents (TOC)
+ register before continuing at the normal entry point. When the TOC is
+ already valid, the normal entry point is used, this is typically the case.
+ The alternate entry point is typically referred to as the global entry
+ point (GEP) in IBM. The normal entry point is typically referred to as
+ the local entry point (LEP).
+ .....
+
+ Is causing regression failures on on PowerPC platforms. The regression
+ failures are in tests:
+
+ gdb.reverse/finish-precsave.exp
+ gdb.btrace/tailcall.exp
+ gdb.mi/mi-reverse.exp
+ gdb.btrace/step.exp
+ gdb.reverse/until-precsave.exp
+ gdb.reverse/finish-reverse.exp
+ gdb.btrace/tailcall-only.exp
+
+ The issue is in gdb/infcmd.c, function finish_command. The value of the
+ two new variables ALT_ENTRY_POINT and ENTRY_POINT are being initializezed
+ to SAL.PC. However, SAL has just been declared. The value of SAL.PC is
+ zero at this point. The intialization of ALT_ENTRY_POINT and ENTRY_POINT
+ needs to be after the initialization of SAL.
+
+ This patch moves the initialization of ALT_ENTRY_POINT and ENTRY_POINT
+ variables to fix the regression failures.
+
+ The patch has been tested on Power10 and on X86.
+
+2023-03-21 Tom de Vries <tdevries@suse.de>
+
+ [gdb/testsuite] Check remote_exec results in board files
+ Make sure the result of each remote_exec in gdb/testsuite/boards/*.exp is
+ checked.
+
+ Tested on x86_64-linux.
+
+2023-03-21 Tom de Vries <tdevries@suse.de>
+
+ [gdb/testsuite] Add missing quote in remote-gdbserver-on-localhost.exp
+ In a recent commit I forgot to add a double quote before chmod here:
+ ...
+ remote_exec build $rsh_cmd chmod go-rx ."
+ ...
+
+ Fix it by adding the missing double quote.
+
+2023-03-21 Tom de Vries <tdevries@suse.de>
+
+ [gdb/testsuite] Remove ${board}_file from remote-stdio-gdbserver.exp
+ Looking at the implementation of ${board}_file in remote-stdio-gdbserver.exp,
+ I don't see a relevant difference with the implementation of standard_file
+ in dejagnu.
+
+ Simplify the board by removing ${board}_file.
+
+ Tested on x86_64-linux, by running gdb.testsuite/board-sanity.exp.
+
+2023-03-21 Tom de Vries <tdevries@suse.de>
+
+ [gdb/testsuite] Use localhost instead of 127.0.0.1 for boards
+ Some boards in gdb/testsuite/boards use the hardcoded ipv4 address "127.0.0.1".
+
+ Use instead "localhost".
+
+ Tested on x86_64-linux.
+
+2023-03-21 Tom de Vries <tdevries@suse.de>
+
+ [gdb/testsuite] Fix gdb.xml/tdesc-regs.exp for remote host
+ Fix test-case gdb.xml/tdesc-regs.exp for remote host by using appropriate
+ filenames.
+
+ Tested on x86_64-linux.
+
+2023-03-21 Tom de Vries <tdevries@suse.de>
+
+ [gdb/testsuite] Fix gdb.xml/tdesc-reload.exp for remote host
+ Fix test-case gdb.xml/tdesc-reload.exp for remote host by using appropriate
+ filenames.
+
+ Tested on x86_64-linux.
+
+2023-03-21 Tom de Vries <tdevries@suse.de>
+
+ [gdb/testsuite] Set remotedir in local-remote-host-native.exp
+ In commit ff581559f9d ("[gdb/testsuite] Add gdb.testsuite/board-sanity.exp") I
+ removed handling of HOST_DIR in local-remote-host-native.exp to fix FAILs
+ in test-case gdb.testsuite/board-sanity.exp.
+
+ Reintroduce handling of HOST_DIR using remotedir, now that using remotedir for
+ a host board no longer make compilation fail due to commit 80d6c79866f
+ ("[gdb/testsuite] Handle remotedir in remote_upload").
+
+ This fixes an XFAIL in gdb.testsuite/board-sanity.exp, introduced in commit
+ 3741934fdb0 ("[gdb/testsuite] Set remotedir by default in some boards").
+
+ Tested on x86_64-linux.
+
+2023-03-21 Jiawei <jiawei@iscas.ac.cn>
+
+ RISC-V: Fix disassemble fetch fail return value.
+ This bug reported in
+ https://sourceware.org/bugzilla/show_bug.cgi?id=30184
+ And discussed in
+ https://sourceware.org/pipermail/binutils/2023-February/126213.html
+
+ We also checked the implementation of return value in arm and mips.
+ So this patch changes the return value to -1, that can fix bugs and maintain
+ consistency with other architectures.
+
+ opcodes/ChangeLog:
+
+ * riscv-dis.c (print_insn_riscv):Change the return value.
+
+2023-03-21 Aditya Vidyadhar Kamath <Aditya.Kamath1@ibm.com>
+
+ Remove .c header files from rs6000-aix-nat.c file
+ Since the tdesc_powerpc_vsx32, tdesc_powerpc_vsx64, tdesc_powerpc_altivec32 and tdesc_powerpc_altivec64
+ definitions are moved to ppc-tdep.h we no longer need to import these .c files.
+
+2023-03-21 GDB Administrator <gdbadmin@sourceware.org>
+
+ Automatic date update in version.in
+
+2023-03-20 Tom Tromey <tom@tromey.com>
+
+ Remove some unnecessary includes from *-exp.y
+ I noticed a weird comment in one of the .y files, and then ended up
+ removing some unnecessary #includes from these files.
+
+ Tested by rebuilding.
+
+ Approved-By: Simon Marchi <simon.marchi@efficios.com>
+
+2023-03-20 Tom Tromey <tromey@adacore.com>
+
+ Remove mi_version function
+ The mi_version function is unused, and I think it's better overall if
+ it is never used. This patch removes it. Tested by rebuilding.
+
+ Approved-By: Simon Marchi <simon.marchi@efficios.com>
+
+2023-03-20 Tom Tromey <tromey@adacore.com>
+
+ Update python-helper.exp for type allocation changes
+ The type allocation changes introduced a failure in python-helper.exp
+ that I did not notice. The bug is that, with these patches,
+ arch-allocated integer types have a TYPE_SPECIFIC_INT object attached.
+ This patch updates the test to allow this.
+
+ Bug: https://sourceware.org/bugzilla/show_bug.cgi?id=30253
+
+2023-03-20 Tom de Vries <tdevries@suse.de>
+
+ [gdb/testsuite] Handle remotedir in remote_upload
+ Dejagnu's remotedir implementation has support in remote_exec and
+ remote_download, but not remote_upload.
+
+ Consider the following scenario:
+ - downloading an executable to target,
+ - running it,
+ - uploading a file produced by the executable
+ while assuming remote target user remote-target with homedir
+ /home/remote-target and remotedir set to /home/remote-target/tmp.
+
+ Concretely, it looks like this:
+ ...
+ # binfile == "$outputs/gdb.abc/a.out"
+ set target_binfile [remote_download target $binfile]
+ # target_binfile == "/home/remote-target/tmp/a.out"
+ remote_exec target $target_binfile
+ # Running $target_binfile produced /home/remote-target/tmp/result.txt.
+ set result [remote_upload target /home/remote-target/tmp/result.txt \
+ $outputs/gdb.abc/result.txt]
+ # result == $outputs/gdb.abc/result.txt.
+ ...
+
+ Add a remote_upload implementation that also handles remotedir in lib/gdb.exp,
+ overriding dejagnu's remote_upload, such that we can simplify the
+ remote_upload call to:
+ ...
+ set result [remote_upload target result.txt $outputs/gdb.abc/result.txt]
+ ...
+
+ Tested on x86_64-linux.
+
+ PR testsuite/30250
+ Bug: https://sourceware.org/bugzilla/show_bug.cgi?id=30250
+
+2023-03-20 Andrew Burgess <aburgess@redhat.com>
+
+ gdb: fix crash during command completion
+ In some cases GDB will fail when attempting to complete a command that
+ involves a rust symbol, the failure can manifest as a crash.
+
+ The problem is caused by the completion_match_for_lcd object being
+ left containing invalid data during calls to cp_symbol_name_matches_1.
+
+ The first question to address is why we are calling a C++ support
+ function when handling a rust symbol. That's due to GDB's auto
+ language detection for msymbols, in some cases GDB can't tell if a
+ symbol is a rust symbol, or a C++ symbol.
+
+ The test application contains symbols for functions which are
+ statically linked in from various rust support libraries. There's no
+ DWARF for these symbols, so all GDB has is the msymbols built from the
+ ELF symbol table.
+
+ Here's the problematic symbol that leads to our crash:
+
+ mangled: _ZN4core3str21_$LT$impl$u20$str$GT$5parse17h5111d2d6a50d22bdE
+ demangled: core::str::<impl str>::parse
+
+ As an msymbol this is initially created with language auto, then GDB
+ eventually calls symbol_find_demangled_name, which loops over all
+ languages calling language_defn::sniff_from_mangled_name, the first
+ language that can demangle the symbol gets assigned as the language
+ for that symbol.
+
+ Unfortunately, there's overlap in the mangled symbol names,
+ some (legacy) rust symbols can be demangled as both rust and C++, see
+ cplus_demangle in libiberty/cplus-dem.c where this is mentioned.
+
+ And so, because we check the C++ language before we check for rust,
+ then the msymbol is (incorrectly) given the C++ language.
+
+ Now it's true that is some cases we might be able to figure out that a
+ demangled symbol is not actually a valid C++ symbol, for example, in
+ our case, the construct '::<impl str>::' is not, I believe, valid in a
+ C++ symbol, we could look for ':<' and '>:' and refuse to accept this
+ as a C++ symbol.
+
+ However, I'm not sure it is always possible to tell that a demangled
+ symbol is rust or C++, so, I think, we have to accept that some times
+ we will get this language detection wrong.
+
+ If we accept that we can't fix the symbol language detection 100% of
+ the time, then we should make sure that GDB doesn't crash when it gets
+ the language wrong, that is what this commit addresses.
+
+ In our test case the user tries to complete a symbol name like this:
+
+ (gdb) complete break pars
+
+ This results in GDB trying to find all symbols that match 'pars',
+ eventually we consider our problematic symbol, and we end up with a
+ call stack that looks like this:
+
+ #0 0x0000000000f3c6bd in strncmp_iw_with_mode
+ #1 0x0000000000706d8d in cp_symbol_name_matches_1
+ #2 0x0000000000706fa4 in cp_symbol_name_matches
+ #3 0x0000000000df3c45 in compare_symbol_name
+ #4 0x0000000000df3c91 in completion_list_add_name
+ #5 0x0000000000df3f1d in completion_list_add_msymbol
+ #6 0x0000000000df4c94 in default_collect_symbol_completion_matches_break_on
+ #7 0x0000000000658c08 in language_defn::collect_symbol_completion_matches
+ #8 0x0000000000df54c9 in collect_symbol_completion_matches
+ #9 0x00000000009d98fb in linespec_complete_function
+ #10 0x00000000009d99f0 in complete_linespec_component
+ #11 0x00000000009da200 in linespec_complete
+ #12 0x00000000006e4132 in complete_address_and_linespec_locations
+ #13 0x00000000006e4ac3 in location_completer
+
+ In cp_symbol_name_matches_1 we enter a loop, this loop repeatedly
+ tries to match the demangled problematic symbol name against the user
+ supplied text ('pars'). Each time around the loop another component
+ of the symbol name is stripped off, thus, we check 'pars' against
+ these options:
+
+ core::str::<impl str>::parse
+ str::<impl str>::parse
+ <impl str>::parse
+ parse
+
+ As soon as we get a match the cp_symbol_name_matches_1 exits its loop
+ and returns. In our case, when we're looking for 'pars', the match
+ occurs on the last iteration of the loop, when we are comparing to
+ 'parse'.
+
+ Now the problem here is that cp_symbol_name_matches_1 uses the
+ strncmp_iw_with_mode, and inside strncmp_iw_with_mode we allow for
+ skipping over template parameters. This allows GDB to match the
+ symbol name 'foo<int>(int,int)' if the user supplies 'foo(int,'.
+ Inside strncmp_iw_with_mode GDB will record any template arguments
+ that it has skipped over inside the completion_match_for_lcd object
+ that is passed in as an argument.
+
+ And so, when GDB tries to match against '<impl str>::parse', the first
+ thing it sees is '<impl str>', GDB assumes this is a template argument
+ and records this as a skipped region within the
+ completion_match_for_lcd object. After '<impl str>' GDB sees a ':'
+ character, which doesn't match with the 'pars' the user supplied, so
+ strncmp_iw_with_mode returns a value indicating a non-match. GDB then
+ removes the '<impl str>' component from the symbol name and tries
+ again, this time comparing to 'parse', which does match.
+
+ Having found a match, then in cp_symbol_name_matches_1 we record the
+ match string, and the full symbol name within the
+ completion_match_result object, and return.
+
+ The problem here is that the skipped region, the '<impl str>' that we
+ recorded in the penultimate loop iteration was never discarded, its
+ still there in our returned result.
+
+ If we look at what the pointers held in the completion_match_result
+ that cp_symbol_name_matches_1 returns, this is what we see:
+
+ core::str::<impl str>::parse
+ | \________/ |
+ | | '--- completion match string
+ | '---skip range
+ '--- full symbol name
+
+ When GDB calls completion_match_for_lcd::finish, GDB tries to create a
+ string using the completion match string (parse), but excluding the
+ skip range, as the stored skip range is before the start of the
+ completion match string, then GDB tries to do some weird string
+ creation, which will cause GDB to crash.
+
+ The reason we don't often see this problem in C++ is that for C++
+ symbols there is always some non-template text before the template
+ argument. This non-template text means GDB is likely to either match
+ the symbol, or reject the symbol without storing a skip range.
+
+ However, notice, I did say, we don't often see this problem. Once I
+ understood the issue, I was able to reproduce the crash using a pure
+ C++ example:
+
+ template<typename S>
+ struct foo
+ {
+ template<typename T>
+ foo (int p1, T a)
+ {
+ s = 0;
+ }
+
+ S s;
+ };
+
+ int
+ main ()
+ {
+ foo<int> obj (2.3, 0);
+ return 0;
+ }
+
+ Then in GDB:
+
+ (gdb) complete break foo(int
+
+ The problem here is that the C++ symbol for the constructor looks like
+ this:
+
+ foo<int>::foo<double>(int, double)
+
+ When GDB enters cp_symbol_name_matches_1 the symbols it examines are:
+
+ foo<int>::foo<double>(int, double)
+ foo<double>(int, double)
+
+ The first iteration of the loop will match the 'foo', then add the
+ '<int>' template argument will be added as a skip range. When GDB
+ find the ':' after the '<int>' the first iteration of the loop fails
+ to match, GDB removes the 'foo<int>::' component, and starts the
+ second iteration of the loop.
+
+ Again, GDB matches the 'foo', and now adds '<double>' as a skip
+ region. After that the '(int' successfully matches, and so the second
+ iteration of the loop succeeds, but, once again we left the '<int>' in
+ place as a skip region, even though this occurs before the start of
+ our match string, and this will cause GDB to crash.
+
+ This problem was reported to the mailing list, and a solution
+ discussed in this thread:
+
+ https://sourceware.org/pipermail/gdb-patches/2023-January/195166.html
+
+ The solution proposed here is similar to one proposed by the original
+ bug reported, but implemented in a different location within GDB.
+ Instead of placing the fix in strncmp_iw_with_mode, I place the fix in
+ cp_symbol_name_matches_1. I believe this is a better location as it
+ is this function that implements the loop, and it is this loop, which
+ repeatedly calls strncmp_iw_with_mode, that should be resetting the
+ result object state (I believe).
+
+ What I have done is add an assert to strncmp_iw_with_mode that the
+ incoming result object is empty.
+
+ I've also added some other asserts in related code, in
+ completion_match_for_lcd::mark_ignored_range, I make some basic
+ assertions about the incoming range pointers, and in
+ completion_match_for_lcd::finish I also make some assertions about how
+ the skip ranges relate to the match pointer.
+
+ There's two new tests. The original rust example that was used in the
+ initial bug report, and a C++ test. The rust example depends on which
+ symbols are pulled in from the rust libraries, so it is possible that,
+ at some future date, the problematic symbol will disappear from this
+ test program. The C++ test should be more reliable, as this only
+ depends on symbols from within the C++ source code.
+
+ Since I originally posted this patch to the mailing list, the
+ following patch has been merged:
+
+ commit 6e7eef72164c00d6a5a7b0bce9fa01f5481f33cb
+ Date: Sun Mar 19 09:13:10 2023 -0600
+
+ Use rust_demangle to fix a crash
+
+ This solves the problem of a rust symbol ending up in the C++ specific
+ code by changing the order languages are sorted. However, this new
+ commit doesn't address the issue in the C++ code which was fixed with
+ this commit.
+
+ Given that the C++ issue is real, and has a reproducer, I'm still
+ going to merge this fix. I've left the discussion of rust in this
+ commit message as I originally wrote it, but it should be read within
+ the context of GDB prior to commit 6e7eef72164c00d6a5a7.
+
+ Co-Authored-By: Zheng Zhan <zzlossdev@163.com>
+
+2023-03-20 Jan Beulich <jbeulich@suse.com>
+
+ x86: drop identifier_chars[]
+ It tries to resemble what's underlying is_part_of_name(), but doesn't
+ quite achieve that: '$' for example is unconditionally marked as part of
+ symbol names, but was included as identifier char for Intel syntax only.
+ Note that i386_att_operand() checks for the immediate prefix first, so
+ the wider coverage by starts_memory_operand() is has no real effect
+ there, but it does matter for something like
+
+ mov %fs:$dollar, %eax
+
+ which previously wasn't accepted (but which clearly is a memory
+ reference - there's no point in forcing people to parenthesize the
+ symbol name). Similarly including '%' as an identfier for Intel syntax
+ had no real significance to the rest of the assembler. If '%' was to be
+ valid in (unquoted) symbol names, LEX_PCT would need to be defined.
+
+ Note further that this also addresses the latent issue of a sub-target
+ defining LEX_AT or LEX_QM to zero: That would make '@' and/or '?' no
+ valid part of symbol names, but would have included them in what
+ is_identifier_char() considers a valid part of a name. (There's a minor
+ related issue which is actually being eliminated: te-interix.h allows
+ '@' only in the middle of symbol names, yet starts_memory_operand()
+ specifically looks at the first character of [possibly] a symbol name.)
+
+ In parse_real_register() there's no point also checking is_name_ender()
+ as at this point no character is marked solely LEX_END_NAME by any sub-
+ target. Checking is_name_beginner() is also pointless as the hash lookup
+ will fail anyway for a zero-length name.
+
+ While touching the check in parse_real_register() also drop the
+ "allow_naked_reg" part of the condition: This has only led to
+ inconsistent error messages.
+
+2023-03-20 Jan Beulich <jbeulich@suse.com>
+
+ x86/AT&T: restrict recognition of the "absolute branch" prefix character
+ While in principle merely rejecting this for .insn would be sufficient
+ for the purposes there, be more generic and reject it for anything that
+ isn't going to be a branch: All elements of same-mnemonic template
+ groups either are branches, or are not, and the few cases possibly
+ requiring a 2nd parsing pass aren't affected either. This then also
+ improves diagnostics for misuses like
+
+ inc *%eax
+ incl %fs:*(%eax)
+ add *$1, %eax
+
+2023-03-20 Jan Beulich <jbeulich@suse.com>
+
+ x86: drop "shimm" special case template expansions
+ With VexVVVV only being boolean, the SSE shift-by-immediate instructions
+ don't need special casing anymore for SSE2AVX handling. Simplify the two
+ respective templates. (No change to generated tables.)
+
+2023-03-20 Jan Beulich <jbeulich@suse.com>
+
+ x86: VexVVVV is now merely a boolean
+ With the SDM long having dropped the NDS/NDD/DDS concept of identifying
+ encoding variants, we can finally do away with this concept as well. Of
+ the few consumers of the attribute, only an assertion was still checking
+ for a particular value, which we don't really need to retain.
+
+ When touching lines anyway, modernize other aspects as well. This often
+ improves similarity to adjacent lines.
+
+2023-03-20 Jan Beulich <jbeulich@suse.com>
+
+ x86: re-work build_modrm_byte()'s register assignment
+ The function has accumulated a number of special cases for no real
+ reason. Some were necessary because insn attributes (SwapSources in
+ particular) weren't suitably utilized instead. Note that the addition of
+ SwapSources actually increases consistency among the templates: Like
+ others which already have the attribute, these are all insns where the
+ VEX.VVVV-encoded register comes first (or last when looking at the SDM).
+
+ Note that the vexvvvv attribute now has merely boolean meaning anymore,
+ in line with the SDM long having dropped the NDS/NDD/DDS concept of
+ identifying encoding variants. The fallout will be taken care of
+ subsequently, though, to not further clutter the change here.
+
+ As to the TILEZERO special case: If more instructions like this
+ appeared, a new attribute would likely be the way to go. But as long as
+ it's only a single insn, going from the mnemonic is cheaper.
+
+2023-03-20 Cupertino Miranda <cupertino.miranda@oracle.com>
+
+ Changed ld and gas BPF tests
+ Recent BPF patch removed and renamed the list of relocations based on
+ the limitations of BPF instruction set.
+ This patch is a correction to the tests.
+
+ Reloc howto access broken for BPF
+ Forgot to change the logic to access the reloc howto from
+ bpf_elf_relocate_section.
+ Problem was introduced in previous BPF commit.
+
+2023-03-20 Tom Tromey <tom@tromey.com>
+
+ Use rust_demangle to fix a crash
+ PR rust/30211 points out a crash caused by a particular completion.
+ This turns out to happen because a Rust minsym winds up in a
+ C++-specific path in strncmp_iw_with_mode, which ultimately causes the
+ completer to pass invalid arguments to string::append.
+
+ This patch fixes the bug by reordering the language constants so that
+ Rust comes before C++, and then using rust_demangle. This ensures
+ that minsyms are correctly marked as "Rust", avoiding this code and
+ thus the crash.
+
+ Bug: https://sourceware.org/bugzilla/show_bug.cgi?id=20367
+ Bug: https://sourceware.org/bugzilla/show_bug.cgi?id=30211
+ Reviewed-By: Andrew Burgess <aburgess@redhat.com>
+
+2023-03-20 Tom Tromey <tromey@adacore.com>
+
+ Make ui_out::do_progress_end 'private'
+ I noticed that ui_out::do_progress_end is public, just to support one
+ use in debuginfod-support.c. This patch makes it private, updates
+ progress_info to call it from its destructor, and finally changes
+ debuginfod-support.c to follow.
+
+2023-03-20 Andrew Burgess <aburgess@redhat.com>
+
+ gdb: don't use the global thread-id in the saved breakpoints file
+ I noticed that breakpoint::print_recreate_thread was printing the
+ global thread-id. This function is used to implement the 'save
+ breakpoints' command, and should be writing out suitable CLI commands
+ for recreating the current breakpoints. The CLI does not use global
+ thread-ids, but instead uses the inferior specific thread-ids,
+ e.g. "2.1".
+
+ After some discussion on the mailing list it was suggested that the
+ most consistent solution would be for the saved breakpoints file to
+ always contain the inferior-qualified thread-id, so the file would
+ include "thread 1.1" instead of just "thread 1", even when there is
+ only a single inferior.
+
+ So, this commit adds print_full_thread_id, which is just like the
+ existing print_thread_id, only it always prints the inferior-qualified
+ thread-id.
+
+ I then update the existing print_thread_id to make use of this new
+ function, and finally, I update breakpoint::print_recreate_thread to
+ also use this new function.
+
+ There's a multi-inferior test that confirms the saved breakpoints file
+ correctly includes the fully-qualified thread-id, and I've also
+ updated the single inferior test gdb.base/save-bp.exp to have it
+ validate that the saved breakpoints file includes the
+ inferior-qualified thread-id, even for this single inferior case.
+
+2023-03-20 Alan Modra <amodra@gmail.com>
+
+ Revert "segfault at i386-dis.c:9815"
+ This reverts commit 92d450c79ad321e42f9a77692b5db10d0f7b9344.
+
+ Accessing these local var structs using a volatile qualified pointer
+ may indeed read the object, but I don't think changed values are
+ guaranteed to be written back to the object unless the actual object
+ is declared volatile. That would probably slow down i386 disassembly
+ unacceptably.
+
+2023-03-20 Alan Modra <amodra@gmail.com>
+
+ libctf: unused variable
+ * ctf-archive.c (arc_mmap_writeout): Delete unused variable.
+
+2023-03-20 Vladimir Mezentsev <vladimir.mezentsev@oracle.com>
+
+ gprofng: Use prototype to call libc functions
+ libcollector may not link against libC.
+ We use dlsym() to get a function from libc.
+ In some files, pointers to these functions do not have prototypes.
+ I also moved the shared definitions to libcollector/collect.h.
+
+ gprofng/ChangeLog
+ 2023-03-15 Vladimir Mezentsev <vladimir.mezentsev@oracle.com>
+
+ libcollector/collector.c: Add prototypes.
+ libcollector/dispatcher.c: Likewise.
+ libcollector/heaptrace.c: Likewise.
+ libcollector/iotrace.c: Likewise.
+ libcollector/linetrace.c: Likewise.
+ libcollector/mmaptrace.c: Likewise.
+ libcollector/synctrace.c: Likewise.
+ libcollector/collector.h: Add CALL_REAL(), NULL_PTR(), and DBG_LT.
+
+2023-03-20 GDB Administrator <gdbadmin@sourceware.org>
+
+ Automatic date update in version.in
+
+2023-03-19 Tom Tromey <tom@tromey.com>
+
+ Don't declare psymbol_functions::fill_psymbol_map
+ psymbol_functions::fill_psymbol_map was removed, but I forgot to
+ remove the declaration. This patch removes it. Tested by rebuilding.
+
+2023-03-19 Alan Modra <amodra@gmail.com>
+
+ segfault at i386-dis.c:9815
+ * i386-dis.c (print_insn): Access "ins" and "priv" via volatile
+ pointers after second sigsetjmp return.
+
+2023-03-19 Aditya Vidyadhar Kamath <Aditya.Kamath1@ibm.com>
+
+ Enable vector register visibility in core file for AIX binutils
+ This patch will enable vector register visibility when AIX FOLKS do
+ core file analysis.
+
+2023-03-19 Alan Modra <amodra@gmail.com>
+
+ Regen ld/po/BLD-POTFILES.in
+
+2023-03-19 Alan Modra <amodra@gmail.com>
+
+ XCOFF archive sanity check
+ XCOFF archive elements are in a linked list. Add a little more sanity
+ checking. This of course doesn't stop the fuzzers finding a way to
+ make a loop, but this check is cheap.
+
+ * coff-rs6000.c (_bfd_xcoff_openr_next_archived_file): Sanity
+ check that next element isn't pointing back to the header.
+
+2023-03-19 Alan Modra <amodra@gmail.com>
+
+ rewrite_elf_program_header and want_p_paddr_set_to_zero
+ Layout in rewrite_elf_program_header is really done by lma, even if
+ program headers are going to have their p_paddr forced to zero. Thus
+ when not matching against an existing segment, don't try to use a
+ "vma" from elf_segment_map.
+
+ * elf.c (is_contained_by): Replace "bed" param with "use_vaddr".
+ (IS_SECTION_IN_INPUT_SEGMENT): Adjust is_contained_by call.
+ (rewrite_elf_program_header): Always match against lma in
+ calls to is_contained_by using new maps.
+
+2023-03-19 Alan Modra <amodra@gmail.com>
+
+ Another sanity check for read_section_stabs_debugging_info
+ * rddbg.c (read_section_stabs_debugging_info): Ignore invalid
+ stab sections with size less than 12 bytes.
+
+ ctf segfaults
+ PR 30228
+ PR 30229
+ * ctf-open.c (ctf_bufopen_internal): Check for NULL cts_data.
+ * ctf-archive.c (ctf_arc_bufpreamble, ctf_arc_bufopen): Likewise.
+
+2023-03-19 GDB Administrator <gdbadmin@sourceware.org>
+
+ Automatic date update in version.in
+
+2023-03-18 Tom Tromey <tom@tromey.com>
+
+ Remove objfile_type
+ This removes objfile_type, in favor of always using the per-arch
+ builtins.
+
+ Reviewed-By: Simon Marchi <simon.marchi@efficios.com>
+
+2023-03-18 Tom Tromey <tom@tromey.com>
+
+ Add some types to struct builtin_type
+ This adds some types to struct builtin_type, ensuring it contains all
+ the types currently used by objfile_type.
+
+ Reviewed-By: Simon Marchi <simon.marchi@efficios.com>
+
+2023-03-18 Tom Tromey <tom@tromey.com>
+
+ Rename objfile_type to builtin_type
+ This renames objfile_type to be an overload of builtin_type, in
+ preparation for their unification.
+
+ Reviewed-By: Simon Marchi <simon.marchi@efficios.com>
+
+2023-03-18 Tom Tromey <tom@tromey.com>
+
+ Use builtin type when appropriate
+ There are a few spots that check whether a type is objfile-owned, and
+ then choose either the objfile- or arch-specific builtin type. I
+ don't think there is a need to do this any more (if there ever was),
+ because it is ok for an objfile-allocated type to refer to an
+ arch-allocated type.
+
+ Reviewed-By: Simon Marchi <simon.marchi@efficios.com>
+
+2023-03-18 Tom Tromey <tom@tromey.com>
+
+ Use type allocator for set types
+ This changes the set type creation function to accept a type
+ allocator, and updates all the callers. Note that symbol readers
+ should generally allocate on the relevant objfile, regardless of the
+ underlying type of the set, which is what this patch implements.
+
+ Reviewed-By: Simon Marchi <simon.marchi@efficios.com>
+
+2023-03-18 Tom Tromey <tom@tromey.com>
+
+ Use type allocator for array types
+ This changes the array type creation functions to accept a type
+ allocator, and updates all the callers. Note that symbol readers
+ should generally allocate on the relevant objfile, regardless of the
+ placement of the index type of the array, which is what this patch
+ implements.
+
+ Reviewed-By: Simon Marchi <simon.marchi@efficios.com>
+
+2023-03-18 Tom Tromey <tom@tromey.com>
+
+ Use type allocator for range types
+ This changes the range type creation functions to accept a type
+ allocator, and updates all the callers. Note that symbol readers
+ should generally allocate on the relevant objfile, regardless of the
+ underlying type of the range, which is what this patch implements.
+
+ Reviewed-By: Simon Marchi <simon.marchi@efficios.com>
+
+2023-03-18 Tom Tromey <tom@tromey.com>
+
+ Unify arch_pointer_type and init_pointer_type
+ This unifies arch_pointer_type and init_pointer_type by using a type
+ allocator.
+
+ Reviewed-By: Simon Marchi <simon.marchi@efficios.com>
+
+2023-03-18 Tom Tromey <tom@tromey.com>
+
+ Unify arch_decfloat_type and init_decfloat_type
+ This unifies arch_decfloat_type and init_decfloat_type by using a type
+ allocator.
+
+ Reviewed-By: Simon Marchi <simon.marchi@efficios.com>
+
+2023-03-18 Tom Tromey <tom@tromey.com>
+
+ Unify arch_float_type and init_float_type
+ This unifies arch_float_type and init_float_type by using a type
+ allocator.
+
+ Reviewed-By: Simon Marchi <simon.marchi@efficios.com>
+
+2023-03-18 Tom Tromey <tom@tromey.com>
+
+ Unify arch_boolean_type and init_boolean_type
+ This unifies arch_boolean_type and init_boolean_type by using a type
+ allocator.
+
+ Reviewed-By: Simon Marchi <simon.marchi@efficios.com>
+
+2023-03-18 Tom Tromey <tom@tromey.com>
+
+ Unify arch_character_type and init_character_type
+ This unifies arch_character_type and init_character_type by using a
+ type allocator.
+
+ Reviewed-By: Simon Marchi <simon.marchi@efficios.com>
+
+2023-03-18 Tom Tromey <tom@tromey.com>
+
+ Unify arch_integer_type and init_integer_type
+ This unifies arch_integer_type and init_integer_type by using a type
+ allocator.
+
+ Reviewed-By: Simon Marchi <simon.marchi@efficios.com>
+
+2023-03-18 Tom Tromey <tom@tromey.com>
+
+ Remove init_type
+ This removes init_type, replacing all uses with the new type
+ allocator.
+
+ Reviewed-By: Simon Marchi <simon.marchi@efficios.com>
+
+2023-03-18 Tom Tromey <tom@tromey.com>
+
+ Remove arch_type
+ This removes arch_type, replacing all uses with the new type
+ allocator.
+
+ Reviewed-By: Simon Marchi <simon.marchi@efficios.com>
+
+2023-03-18 Tom Tromey <tom@tromey.com>
+
+ Reuse existing builtin types
+ This changes a few spots to reuse the existing builting "void" type,
+ rather than construct a new one.
+
+ Reviewed-By: Simon Marchi <simon.marchi@efficios.com>
+
+2023-03-18 Tom Tromey <tom@tromey.com>
+
+ Remove alloc_type
+ This removes alloc_type, replacing all uses with the new type
+ allocator.
+
+ Reviewed-By: Simon Marchi <simon.marchi@efficios.com>
+
+2023-03-18 Tom Tromey <tom@tromey.com>
+
+ Remove alloc_type_copy
+ This removes alloc_type_copy, replacing all uses with the new type
+ allocator.
+
+ Reviewed-By: Simon Marchi <simon.marchi@efficios.com>
+
+2023-03-18 Tom Tromey <tom@tromey.com>
+
+ Remove alloc_type_arch
+ This removes alloc_type_arch, replacing all uses with the new type
+ allocator.
+
+ Reviewed-By: Simon Marchi <simon.marchi@efficios.com>
+
+2023-03-18 Tom Tromey <tom@tromey.com>
+
+ Introduce type_allocator
+ This introduces a new type_allocator class. This class will be used
+ to abstract out the placement of new types, so that type-creation code
+ can be simplified and shared.
+
+ Reviewed-By: Simon Marchi <simon.marchi@efficios.com>
+
+2023-03-18 Tom de Vries <tdevries@suse.de>
+
+ [gdb/testsuite] Handle unbuffer_output.c for remote host
+ Handle $srcdir/lib/unbuffer_output.c using lappend_include_file.
+
+ Tested on x86_64-linux.
+
+2023-03-18 Tom de Vries <tdevries@suse.de>
+
+ [gdb/testsuite] Handle my-syscalls.h for remote host
+ Handle $srcdir/lib/my-syscalls.h using lappend_include_dir.
+
+ Tested on x86_64-linux.
+
+2023-03-18 Tom de Vries <tdevries@suse.de>
+
+ [gdb/testsuite] Handle attributes.h for remote host
+ Handle $srcdir/lib/attributes.h using lappend_include_dir.
+
+ Tested on x86_64-linux.
+
+2023-03-18 GDB Administrator <gdbadmin@sourceware.org>
+
+ Automatic date update in version.in
+
+2023-03-17 Tom Tromey <tom@tromey.com>
+
+ Fix line table regression
+ Simon pointed out a line table regression, and after a couple of false
+ starts, I was able to reproduce it by hand using his instructions.
+
+ The bug is that most of the code in do_mixed_source_and_assembly uses
+ unrelocated addresses, but one spot does:
+
+ pc = low;
+
+ ... after the text offset has been removed.
+
+ This patch fixes the problem by introducing a new type to represent
+ unrelocated addresses in the line table. This prevents this sort of
+ bug to some degree (it's still possible to manipulate a CORE_ADDR in a
+ bad way, this is unavoidable).
+
+ However, this did let the compiler flag a few spots in that function,
+ and now it's not possible to compare an unrelocated address from a
+ line table with an ordinary CORE_ADDR.
+
+ Regression tested on x86-64 Fedora 36, though note this setup never
+ reproduced the bug in the first place. I also tested it by hand on
+ the disasm-optim test program.
+
+2023-03-17 Frederic Cambus <fred@statdns.com>
+
+ Update the NetBSD system call table to add eventfd(2) and timerfd(2).
+ Generated from sys/sys/syscall.h revision 1.321.
+
+2023-03-17 Simon Marchi <simon.marchi@polymtl.ca>
+
+ gdb: introduce bp_loc_tracepoint
+ Since commit cb1e4e32c2d9 ("catch catch/throw/rethrow", breakpoint ->
+ catchpoint), this simple tracing scenario does not work:
+
+ $ gdb/gdb -nx -q --data-directory=gdb/data-directory ./test
+ Reading symbols from ./test...
+ (gdb) tar rem :1234
+ Remote debugging using :1234
+ Reading symbols from /lib64/ld-linux-x86-64.so.2...
+ (No debugging symbols found in /lib64/ld-linux-x86-64.so.2)
+ 0x00007ffff7fe5730 in ?? () from /lib64/ld-linux-x86-64.so.2
+ (gdb) trace do_something
+ Tracepoint 1 at 0x555555555144: file test.c, line 5.
+ (gdb) tstart
+ (gdb) continue
+ Continuing.
+ Target returns error code '01'.
+
+ The root cause is that the bp_location::nserted flag does not transfer
+ anymore from an old bp_location to the new matching one. When a shared
+ library gets loaded, GDB computes new breakpoint locations for each
+ breakpoint in update_breakpoint_locations. The new locations are in the
+ breakpoint::loc chain, while the old locations are still in the
+ bp_locations global vector. Later, update_global_location_list is
+ called. It tries to map old locations to new locations, and if
+ necessary transfer some properties, like the inserted flag.
+
+ Since commit cb1e4e32c2d9, the inserted flag isn't transferred for
+ locations of tracepoints. This is because bl_address_is_meaningful used
+ to be implemented like this:
+
+ static int
+ breakpoint_address_is_meaningful (struct breakpoint *bpt)
+ {
+ enum bptype type = bpt->type;
+
+ return (type != bp_watchpoint && type != bp_catchpoint);
+ }
+
+ and was changed to this:
+
+ static bool
+ bl_address_is_meaningful (bp_location *loc)
+ {
+ return loc->loc_type != bp_loc_other;
+ }
+
+ Because locations for tracepoints have the bp_loc_other type,
+ bl_address_is_meaningful started to return false for them, where it
+ returned true before. This made update_global_location_list skip the
+ part where it calls swap_insertion.
+
+ I think this can be solved by introduced a new bp_loc_tracepoint
+ bp_loc_type.
+
+ I don't know if it's accurate, but my understanding is that bp_loc_type
+ describes roughly "how do we ask the target to insert that location".
+ bp_loc_software_breakpoint are inserted using
+ target_ops::insert_breakpoint_location. bp_loc_hardware_breakpoint are
+ inserted using target_ops::insert_hw_breakpoint.
+ bp_loc_software_watchpoint and bp_loc_hardware_watchpoint are inserted
+ using target_ops::insert_watchpoint. For all these, the address is
+ meaningful, as we ask the target to insert the point at a specific
+ address. bp_loc_other is a catch-all for "the rest", in practice for
+ catchpoints that don't have a specific address (hence why
+ bl_address_is_meaningful returns false for them). For instance,
+ inserting a signal catchpoint is done by asking the target to report
+ that specific signal. GDB doesn't associate an address to that.
+
+ But tracepoints do have a meaningful address to thems, so they can't be
+ bp_loc_other, with that logic. They also can't be
+ bp_loc_software_breakpoint, because we don't want GDB to insert
+ breakpoints for them (even though they might be implemented using
+ software breakpoints by the remote side). So, the new bp_loc_tracepoint
+ type describes that the way to insert these locations is with
+ target_ops::download_tracepoint. It makes bl_address_is_meaningful
+ return true for them. And they'll be ignored by insert_bp_location and
+ GDB won't try to insert a memory breakpoint for them.
+
+ With this, I see a few instances of 'Target returns error code: 01'
+ disappearing from gdb.log, and the results of gdb.trace/*.exp improve a
+ little bit:
+
+ -# of expected passes 3765
+ +# of expected passes 3781
+ -# of unexpected failures 518
+ +# of unexpected failures 498
+
+ Things remain quite broken in that area though.
+
+ Change-Id: Ic40935c450410f4bfaba397c9ebc7faf97320dd3
+
+2023-03-17 Carl Love <cel@us.ibm.com>
+
+ PowerPC: fix for gdb.reverse/finish-precsave.exp and gdb.reverse/finish-reverse.exp
+ PPC64 multiple entry points, a normal entry point and an alternate entry
+ point. The alternate entry point is to setup the Table of Contents (TOC)
+ register before continuing at the normal entry point. When the TOC is
+ already valid, the normal entry point is used, this is typically the case.
+ The alternate entry point is typically referred to as the global entry
+ point (GEP) in IBM. The normal entry point is typically referred to as
+ the local entry point (LEP).
+
+ When GDB is executing the finish command in reverse, the function
+ finish_backward currently sets the break point at the alternate entry point.
+ This issue is if the function, when executing in the forward direction,
+ entered the function via the normal entry point, execution in the reverse
+ direction will never sees the break point at the alternate entry point. In
+ this case, the reverse execution continues until the next break point is
+ encountered thus stopping at the wrong place.
+
+ This patch adds a new address to struct execution_control_state to hold the
+ address of the alternate entry point (GEP). The finish_backwards function
+ is updated, if the stopping point is between the normal entry point (LEP)
+ and the end of the function, a breakpoint is set at the normal entry point.
+ If the stopping point is between the entry points, a breakpoint is set at
+ the alternate entry point. This ensures that GDB will always stop at the
+ normal entry point. If the function did enter via the alternate entry
+ point, GDB will detect that and continue to execute backwards in the
+ function until the alternate entry point is reached.
+
+ The patch fixes the behavior of the reverse-finish command on PowerPC to
+ match the behavior of the command on other platforms, specifically X86.
+ The patch does not change the behavior of the command on X86.
+
+ A new test is added to verify the reverse-finish command on PowerPC
+ correctly stops at the instruction where the function call is made.
+
+ The patch fixes 11 regression errors in test gdb.reverse/finish-precsave.exp
+ and 11 regression errors in test gdb.reverse/finish-reverse.exp.
+
+ The patch has been tested on Power 10 and X86 processor with no new
+ regression failures.
+
+2023-03-17 Carl Love <cel@us.ibm.com>
+
+ Move step_until procedure
+ Procedure step_until from test gdb.reverse/step-indirect-call-thunk.exp
+ is moved to lib/gdb.exp and renamed repeat_cmd_until. The existing procedure
+ gdb_step_until in lib/gdb.exp is simpler variant of the new repeat_cmd_until
+ procedure. The existing procedure gdb_step_until is changed to just call
+ the new repeat_cmd_until procedure with the command set to "step" and an
+ optional CURRENT string. The default CURRENT string is set to "\}" to work
+ with the existing uses of procedure gdb_step_until.
+
+2023-03-17 Tom de Vries <tdevries@suse.de>
+
+ [gdb/testsuite] Fix regexp in gdb.arch/ftrace-insn-reloc.exp
+ With test-case gdb.arch/ftrace-insn-reloc.exp and host board
+ local-remote-host-notty and target board native-gdbserver I run into:
+ ...
+ (gdb) info sharedlibrary^M
+ From To Syms Read Shared Object Library^M
+ $hex $hex Yes /lib64/ld-linux-x86-64.so.2^M
+ $hex $hex Yes /home/remote-host/libinproctrace.so^M
+ $hex $hex Yes /lib64/libm.so.6^M
+ $hex $hex Yes /lib64/libc.so.6^M
+ $hex $hex Yes /lib64/libdl.so.2^M
+ $hex $hex Yes (*) /usr/lib64/libstdc++.so.6^M
+ $hex $hex Yes (*) /lib64/libgcc_s.so.1^M
+ $hex $hex Yes /lib64/libpthread.so.0^M
+ (*): Shared library is missing debugging information.^M
+ (gdb) FAIL: gdb.arch/ftrace-insn-reloc.exp: IPA loaded
+ ...
+ due to trying to match libinproctrace.so using the target path, while the
+ command lists it using the host path.
+
+ Fix this by making the regexp less strict.
+
+ Tested on x86_64-linux.
+
+2023-03-17 Tom de Vries <tdevries@suse.de>
+
+ [gdb/testsuite] Handle remote host in gdb_load_shlib
+ With test-case gdb.arch/ftrace-insn-reloc.exp and host board
+ local-remote-host-notty and target board native-gdbserver I run into:
+ ...
+ (gdb) tstart^M
+ Target returns error code '.In-process agent library not loaded in process. \
+ Fast and static trace points unavailable.'.^M
+ (gdb) FAIL: gdb.arch/ftrace-insn-reloc.exp: start trace experiment
+ ...
+
+ Fix this by:
+ - handling remote host in gdb_load_shlib, and
+ - moving the gdb_load_shlib to after the clean_restart, such that the
+ set solib-search-path can take effect.
+
+ Tested on x86_64-linux.
+
+2023-03-17 Tom de Vries <tdevries@suse.de>
+
+ [gdb/testsuite] Fix gdb.arch/i386-biarch-core.exp for remote host
+ Fix test-case gdb.arch/i386-biarch-core.exp using gdb_download_remote host.
+
+ Tested on x86_64-linux.
+
+2023-03-17 Tom de Vries <tdevries@suse.de>
+
+ [gdb/testsuite] Handle REMOTE_HOST_USERNAME in local-remote-host
+ Handle REMOTE_HOST_USERNAME in local-remote-host, similar to how that's done for
+ REMOTE_TARGET_USERNAME in remote-gdbserver-on-localhost.
+
+ This helps to keep the home dir clean.
+
+ Since the setup makes $build/gdb/testsuite on build unreadable for the remote
+ host, we run into permission problems for GDB and the data-directory, so fix
+ this (as was done for gdbserver in gdbserver-base.exp) using file normalize.
+
+ Tested on x86_64-linux.
+
+2023-03-17 Tom de Vries <tdevries@suse.de>
+
+ [gdb/testsuite] Set remotedir by default in some boards
+ When doing a gdb_simple_compile, and downloading the resulting exec $obj
+ to target the result $target_obj may be a relative file path, which may give
+ problems when trying to do:
+ ...
+ remote_exec target $target_obj
+ ...
+
+ Fix/workaround this on some target boards by setting remotedir by default, and
+ add a corresponding test in gdb.testsuite/board-sanity.exp.
+
+ This doesn't work for host/target board local-remote-host-native, so xfail this.
+
+ Tested on x86_64-linux.
+
+2023-03-17 Tom de Vries <tdevries@suse.de>
+
+ [gdb/testsuite] Fix have_avx for remote target
+ In proc have_avx we compile some source into an exec, resulting in a file $obj
+ on build, and then attempt to execute it on target:
+ ...
+ set result [remote_exec target $obj]
+ ...
+
+ Fix this by using gdb_remote_download target.
+
+ Likewise in a few other procs that use "remote_exec target".
+
+ Tested on x86_64-linux.
+
+2023-03-17 Tom de Vries <tdevries@suse.de>
+
+ [gdb/testsuite] Handle precise-aligned-alloc.c for remote host
+ With test-case gdb.arch/i386-sse.exp (and likewise gdb.arch/i386-avx.exp) and
+ host board local-remote-host-notty and target board native-gdbserver I run
+ into:
+ ...
+ gdb compile failed, i386-sse.c:68:10: fatal error: \
+ ../lib/precise-aligned-alloc.c: No such file or directory
+ #include "../lib/precise-aligned-alloc.c"
+ ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+ ...
+
+ Fix this using '#include "precise-aligned-alloc.c"' and making that work with
+ non-remote and remote host.
+
+ Tested on x86_64-linux.
+
+2023-03-17 Tom de Vries <tdevries@suse.de>
+
+ [gdb/testsuite] Handle remote host in escape_for_host
+ With test-case gdb.arch/ftrace-insn-reloc.exp and host board
+ local-remote-host-notty and target board native-gdbserver, I run into:
+ ...
+ FAIL: gdb.arch/ftrace-insn-reloc.exp: IPA loaded
+ ...
+ due to having:
+ ...
+ $ readelf -d ftrace-insn-reloc | grep RUNPATH
+ 0x000000000000001d (RUNPATH) Library runpath: []
+ ...
+ instead of:
+ ...
+ $ readelf -d ftrace-insn-reloc | grep RUNPATH
+ 0x000000000000001d (RUNPATH) Library runpath: [$ORIGIN]
+ ...
+
+ Handle this in escape_for_host.
+
+ Tested on x86_64-linux.
+
+2023-03-17 Tom de Vries <tdevries@suse.de>
+
+ [gdb/testsuite] Add escape_for_host
+ In gdb_compile we have:
+ ...
+ lappend new_options "ldflags=-Wl,-rpath,\\\$ORIGIN"
+ ...
+ and we could improve readability by using {} rather than "":
+ ...
+ lappend new_options {ldflags=-Wl,-rpath,\$ORIGIN}
+ ...
+
+ But rather than manually adding escapes in a string, add a new proc
+ escape_for_host that care of this for us, allowing us to write:
+ ...
+ lappend new_options [escape_for_host {ldflags=-Wl,-rpath,$ORIGIN}]
+ ...
+
+ Tested on x86_64-linux.
+
+2023-03-17 Alan Modra <amodra@gmail.com>
+
+ mach-o: out of memory in get_dynamic_reloc_upper_bound
+ * mach-o.c (bfd_mach_o_canonicalize_dynamic_reloc): Move sanity
+ checks..
+ (bfd_mach_o_get_dynamic_reloc_upper_bound): ..to here.
+
+ Another source_sh
+ * scripttempl/z80.sc: Use source_sh to source elf.sc.
+
+2023-03-17 Tom de Vries <tdevries@suse.de>
+
+ [gdb/testsuite] Declare ada unsupported for remote host
+ Currently gdb_ada_compile doesn't support remote host.
+
+ Make this explicit in allow_ada_tests.
+
+ Tested on x86_64-linux.
+
+2023-03-17 Jan Beulich <jbeulich@suse.com>
+
+ gas: apply md_register_arithmetic also to unary '+'
+ Even a unary '+' has to be considered arithmetic; at least on x86 in
+ Intel Syntax mode otherwise bogus insn operands may be accepted.
+ Convert this specific case to binary + (i.e. 0 + <register>). (An
+ implication is that md_operator(,1,) would need to deal with arch-
+ specific equivalents of unary '+' is a similar way, if such an arch-
+ specific variant would be specified in the first place.)
+
+ To avoid duplicating what make_expr_symbol() does to construct a
+ constant-zero expression, simply make its previously local variable a
+ file-scope static one. This way there's also no need to invoke
+ clean_up_expression().
+
+2023-03-17 Jan Beulich <jbeulich@suse.com>
+
+ gas: expose flag_macro_alternate globally
+ Yet again with the removal of gasp about 20 years ago this extra level
+ of indirection isn't necessary anymore either. Drop macro.c's local
+ variable and make as.c's global.
+
+ While doing the conversion, switch the variable to "bool".
+
+2023-03-17 Jan Beulich <jbeulich@suse.com>
+
+ gas: use flag_mri directly in macro processing
+ Again with the removal of gasp about 20 years ago the extra level of
+ indirection isn't necessary anymore. Drop macro.c's local variable and
+ use the global flag directly.
+
+ gas: isolate macro_strip_at to macro.c
+ This removes a leftover from i960 support; with that nothing is left
+ which would set macro_strip_at to non-zero, so the variable is converted
+ to a #define (retaining the logic in case a new user would appear) and
+ macro_init()'s respective parameter is dropped.
+
+ gas: drop function pointer parameter from macro_init()
+ With the removal of gasp (about 20 years ago) the need for this kind-
+ of-hook has disappeared. Go a step beyond merely moving the to be called
+ function: Inline its contents right at the sole call site.
+
+2023-03-17 Tom de Vries <tdevries@suse.de>
+
+ [gdb/testsuite] Fix filename in gdb.debuginfod/crc_mismatch.exp
+ After running test-case gdb.debuginfod/crc_mismatch.exp, I find a dir called '$':
+ ...
+ $ ls $build/gdb/testsuite/
+ $ config.log gdb.log lib outputs site.exp
+ cache config.status gdb.sum Makefile site.bak temp
+ ...
+
+ Fix this by removing the stray '$' here:
+ ...
+ set debugfile "$[standard_output_file ${testfile}.debug]"
+ ...
+
+ Tested on x86_64-linux.
+
+2023-03-17 GDB Administrator <gdbadmin@sourceware.org>
+
+ Automatic date update in version.in
+
+2023-03-16 Andrew Burgess <aburgess@redhat.com>
+
+ gdb/doc: extended documentation for inferior function calls
+ I noticed that the documentation for inferior function calls doesn't
+ say much about what happens if/when an inferior function call is
+ interrupted, i.e. it doesn't describe what the dummy frame looks like
+ on the stack, or how GDB behaves when the inferior is continued and
+ reaches the dummy frame.
+
+ This commit aims to add some of this missing information.
+
+2023-03-16 Tom Tromey <tromey@adacore.com>
+
+ Fix build breakage in rs6000-aix-tdep.c
+ A recent change to rs6000-aix-tdep.c broke the build. This patch
+ fixes it by declaring a few target descriptions in ppc-tdep.h and then
+ not including the various features .c files in rs6000-aix-tdep.c.
+
+2023-03-16 Hui Li <lihui@loongson.cn>
+
+ gdb/testsuite: Add support for LoongArch in gdb.base/float.exp
+ The test results on LoongArch as follows:
+
+ Without this patch:
+
+ ```
+ $ make check-gdb TESTS="gdb.base/float.exp"
+ === gdb Summary ===
+
+ # of expected passes 2
+ # of unexpected failures 1
+
+ ```
+ With this patch:
+
+ ```
+ $ make check-gdb TESTS="gdb.base/float.exp"
+ === gdb Summary ===
+
+ # of expected passes 3
+
+ ```
+
+ Reviewed-By: Tom Tromey <tom@tromey.com>
+ Approved-By: Simon Marchi <simon.marchi@efficios.com>
+
+2023-03-16 Christophe Lyon <christophe.lyon@linaro.org>
+
+ Re: Add --enable-linker-version option
+ The recently-added ld-version*.d tests expect
+ .*GNU ld \(GNU Binutils\) 2.*
+ in the .comment section.
+
+ However, when buidling --with-pkgversion=XXX, we get
+ GNU ld (XXX) 2.[...]
+ instead, leading to a spurious FAIL.
+
+ This small patch replaces "GNU Binutils" with ".*" instead.
+
+ I inspected other testcases to see if we already had similar
+ occurrences but I couldn't see any, so I hope this fix is OK for the
+ purpose?
+
+ Thanks,
+
+ Christophe
+
+2023-03-16 Andrew Burgess <aburgess@redhat.com>
+
+ gdb/doc: spring clean the Python unwinders documentation
+ The documentation for the Python Unwinders API could do with some
+ improvement. The 'Unwinder Skeleton Code' has an error: it says
+ 'unwinders' when it should say 'unwinder' in one case.
+
+ Additionally, by placing the 'Unwinder Skeleton Code' before the
+ section 'Registering an Unwinder' we have skipping including the
+ registration line in the skeleton code. But this is confusion for
+ users (I think) as the skeleton code is almost complete, except for
+ one missing line which the user has to figure out for themselves. By
+ reordering the sections, it is now obvious that the registration
+ should be included in the skeleton code, and the example is therefore
+ almost complete.
+
+ Additionally, in the example skeleton code the way in which the
+ frame-id was being built (using the current stack point and program
+ counter is (a) not correct, and (b) counter to what is laid out in the
+ 'Unwinder Input' section when describing building a frame-id.
+
+ I've removed the incorrect code and replaced it with more generic
+ comments indicating what needs to be done. As the actual actions that
+ need to be performed are both architecture specific, and dependent on
+ the function being unwound, it's almost impossible to include more
+ exact code here, but I think what I'm proposing is less misleading
+ than what we had before.
+
+ I've also added more cross references.
+
+ Reviewed-By: Eli Zaretskii <eliz@gnu.org>
+
+2023-03-16 Clément Chigot <chigot@adacore.com>
+
+ ld/testsuite: disable ilp32 tests for aarch64-qnx
+ aarch64nto32 emulation isn't supported. The tests will then fall back
+ on aarch64elf32. It does work but some extra warnings are being
+ generated because the "-z relro" being added aarch64nto but ignored by
+ aarch64elf32 emulation.
+ Skip the tests to avoid any problems.
+
+ ld/ChangeLog:
+
+ * testsuite/ld-aarch64/emit-relocs-112-overflow.d: Skip for
+ aarch64nto.
+ * testsuite/ld-aarch64/emit-relocs-112.d: Likewise.
+ * testsuite/ld-aarch64/emit-relocs-113.d: Likewise.
+ * testsuite/ld-aarch64/emit-relocs-114-overflow.d: Likewise.
+ * testsuite/ld-aarch64/emit-relocs-114.d: Likewise.
+ * testsuite/ld-aarch64/emit-relocs-115.d: Likewise.
+ * testsuite/ld-aarch64/emit-relocs-116-overflow.d: Likewise.
+ * testsuite/ld-aarch64/emit-relocs-116.d: Likewise.
+ * testsuite/ld-aarch64/emit-relocs-117.d: Likewise.
+ * testsuite/ld-aarch64/emit-relocs-118-overflow.d: Likewise.
+ * testsuite/ld-aarch64/emit-relocs-118.d: Likewise.
+ * testsuite/ld-aarch64/emit-relocs-119.d: Likewise.
+ * testsuite/ld-aarch64/emit-relocs-22.d: Likewise.
+ * testsuite/ld-aarch64/emit-relocs-23.d: Likewise.
+ * testsuite/ld-aarch64/emit-relocs-28.d: Likewise.
+ * testsuite/ld-aarch64/emit-relocs-86-overflow.d: Likewise.
+ * testsuite/ld-aarch64/emit-relocs-86.d: Likewise.
+ * testsuite/ld-aarch64/emit-relocs-87.d: Likewise.
+ * testsuite/ld-aarch64/emit-relocs-88-overflow.d: Likewise.
+ * testsuite/ld-aarch64/emit-relocs-88.d: Likewise.
+ * testsuite/ld-aarch64/emit-relocs-89.d: Likewise.
+ * testsuite/ld-aarch64/emit-relocs-90-overflow.d: Likewise.
+ * testsuite/ld-aarch64/emit-relocs-90.d: Likewise.
+ * testsuite/ld-aarch64/emit-relocs-92.d: Likewise.
+ * testsuite/ld-aarch64/tls-desc-ie-ilp32.d: Likewise.
+ * testsuite/ld-aarch64/tls-relax-all-ilp32.d: Likewise.
+ * testsuite/ld-aarch64/tls-relax-gd-ie-ilp32.d: Likewise.
+ * testsuite/ld-aarch64/tls-relax-gd-le-ilp32.d: Likewise.
+ * testsuite/ld-aarch64/tls-relax-gdesc-le-2-ilp32.d: Likewise.
+ * testsuite/ld-aarch64/tls-relax-gdesc-le-ilp32.d: Likewise.
+ * testsuite/ld-aarch64/tls-relax-ie-le-2-ilp32.d: Likewise.
+ * testsuite/ld-aarch64/tls-relax-ie-le-3-ilp32.d: Likewise.
+ * testsuite/ld-aarch64/tls-relax-ie-le-ilp32.d: Likewise.
+ * testsuite/ld-aarch64/tls-relax-ld-le-small-ilp32.d: Likewise.
+ * testsuite/ld-aarch64/tls-relax-ld-le-tiny-ilp32.d: Likewise.
+ * testsuite/ld-aarch64/tls-tiny-desc-ie-ilp32.d: Likewise.
+ * testsuite/ld-aarch64/tls-tiny-desc-le-ilp32.d: Likewise.
+ * testsuite/ld-aarch64/tls-tiny-gd-ie-ilp32.d: Likewise.
+ * testsuite/ld-aarch64/tls-tiny-gd-le-ilp32.d: Likewise.
+
+2023-03-16 Clément Chigot <chigot@adacore.com>
+
+ ld/testsuite: add aarch64nto to ld-aarch64
+ ld/ChangeLog:
+
+ * testsuite/ld-aarch64/aarch64-elf.exp: Add support for
+ aarch64nto.
+
+2023-03-16 Clément Chigot <chigot@adacore.com>
+
+ ld: add support of QNX stack arguments for aarch64nto
+ QNX is handling the stack argument using a .note section. Generate it
+ according to ELF argument -zexecstack, -zstack-size and a new NTO
+ argument --lazy-stack. Another NTO argument --stack mimicking
+ -zstack-size is added in order to ensure compatibility with previously
+ made NTO linkers.
+ This requires a new emultempl nto.em which is applied above the default
+ ${ARCH}elf.em.
+
+ ld/ChangeLog:
+
+ * emulparams/aarch64nto.sh: Move to nto.em.
+ * emultempl/nto.em: New file.
+ * testsuite/ld-aarch64/aarch64-nto.exp: New test.
+ * testsuite/ld-aarch64/nto-stack-note-1.d: New test.
+ * testsuite/ld-aarch64/nto-stack-note-2.d: New test.
+ * testsuite/ld-aarch64/start.s: New test.
+
+2023-03-16 Clément Chigot <chigot@adacore.com>
+
+ readelf: add support for QNT_STACK note subsections
+ QNX provides some .note subsections. QNT_STACK is the one controling
+ the stack allocation.
+
+ bfd/ChangeLog:
+
+ * elf.c (BFD_QNT_CORE_INFO): Delete.
+ (BFD_QNT_CORE_STATUS): Likewise.
+ (BFD_QNT_CORE_GREG): Likewise.
+ (BFD_QNT_CORE_FPREG): Likewise.
+ (elfcore_grok_nto_note): Replace BFD_QNT_* by QNT_*.
+
+ binutils/ChangeLog:
+
+ * readelf.c (get_qnx_elfcore_note_type): New function.
+ (print_qnx_note): New function.
+ (process_note): Add support for QNX support.
+
+ include/ChangeLog:
+
+ * elf/common.h (QNT_DEBUG_FULLPATH): New define.
+ (QNT_DEBUG_RELOC): New define.
+ (QNT_STACK): New define.
+ (QNT_GENERATOR): New define.
+ (QNT_DEFAULT_LIB): New define.
+ (QNT_CORE_SYSINFO): New define.
+ (QNT_CORE_INFO): New define.
+ (QNT_CORE_STATUS): New define.
+ (QNT_CORE_GREG): New define.
+ (QNT_CORE_FPREG): New define.
+ (QNT_LINK_MAP): New define.
+
+2023-03-16 Clément Chigot <chigot@adacore.com>
+
+ configure: add new target aarch64-*-nto*
+ This target has its own ld emulation based on aarch64elf.em.
+
+2023-03-16 Cupertino Miranda <cupertino.miranda@oracle.com>
+
+ BPF relocations review / refactoring
+ - Removed not needed relocations.
+ - Renamed relocations to match llvm and linux kernel.
+
+ Relocation changes:
+ R_BPF_INSN_64 => R_BPF_64_64
+ R_BPF_INSN_DISP32 => R_BPF_64_32
+ R_BPF_DATA_32 => R_BPF_64_ABS32
+ R_BPF_DATA_64 => R_BPF_64_ABS64
+
+ ChangeLog:
+
+ * bfd/bpf-reloc.def: Created file with BPF_HOWTO macro entries.
+ * bfd/reloc.c: Removed non needed relocations.
+ * bfd/bfd-in2.h: regenerated.
+ * bfd/libbfd.h: regenerated.
+ * bfd/elf64-bpf.c: Changed relocations.
+ * include/elf/bpf.h: Adapted relocation values/names.
+ * gas/config/tc-bpf.c: Changed relocation mapping.
+
+2023-03-16 Alan Modra <amodra@gmail.com>
+
+ Re: Add --enable-linker-verssion
+ Output sections without any input sections to initialise their flags
+ have their flags initialised by data statements to LOAD, ALLOC,
+ HAS_CONTENTS by default. This is wrong for .comment. Fix that by
+ making the script initialise the section type to INFO, one of the
+ noalloc section types. That also allows the address of .comment to be
+ set to zero, as is usual for non-alloc sections.
+
+ Also, use source_sh for all of the sourced scripts to set up make
+ dependencies.
+
+ PR 30187
+ * scripttempl/misc-sections.sc: Set .comment address to zero
+ and type to INFO.
+ * scripttempl/ft32.sc: Fix breakages from last edit.
+ * scripttempl/arclinux.sc: Use source_sh to source DWARF.sc
+ and misc-sections.sc.
+ * scripttempl/avr.sc: Likewise.
+ * scripttempl/dlx.sc: Likewise.
+ * scripttempl/elf.sc: Likewise.
+ * scripttempl/elf32cr16.sc: Likewise.
+ * scripttempl/elf32crx.sc: Likewise.
+ * scripttempl/elf32msp430.sc: Likewise.
+ * scripttempl/elf64bpf.sc: Likewise.
+ * scripttempl/elf64hppa.sc: Likewise.
+ * scripttempl/elf_chaos.sc: Likewise.
+ * scripttempl/elfarc.sc: Likewise.
+ * scripttempl/elfarcv2.sc: Likewise.
+ * scripttempl/elfd10v.sc: Likewise.
+ * scripttempl/elfd30v.sc: Likewise.
+ * scripttempl/elfm68hc11.sc: Likewise.
+ * scripttempl/elfm68hc12.sc: Likewise.
+ * scripttempl/elfm9s12z.sc: Likewise.
+ * scripttempl/elfmicroblaze.sc: Likewise.
+ * scripttempl/elfxgate.sc: Likewise.
+ * scripttempl/elfxtensa.sc: Likewise.
+ * scripttempl/epiphany_4x4.sc: Likewise.
+ * scripttempl/i386beos.sc: Likewise.
+ * scripttempl/i386go32.sc: Likewise.
+ * scripttempl/ia64vms.sc: Likewise.
+ * scripttempl/ip2k.sc: Likewise.
+ * scripttempl/iq2000.sc: Likewise.
+ * scripttempl/mep.sc: Likewise.
+ * scripttempl/mmo.sc: Likewise.
+ * scripttempl/nds32elf.sc: Likewise.
+ * scripttempl/pru.sc: Likewise.
+ * scripttempl/v850.sc: Likewise.
+ * scripttempl/v850_rh850.sc: Likewise.
+ * scripttempl/visium.sc: Likewise.
+ * scripttempl/xstormy16.sc: Likewise.
+ * scripttempl/z80.sc: Likewise.
+ * testsuite/ld-scripts/ld-version-2.d: Don't skip ft32 or pru.
+
+2023-03-16 Alan Modra <amodra@gmail.com>
+
+ cpu/mem.opc whitespace tidy
+ cpu/
+ * mep.opc: Whitespace and formatting.
+ opcodes/
+ * mep-asm.c: Regenerate.
+ * mep-dis.c: Regenerate.
+
+2023-03-16 Alan Modra <amodra@gmail.com>
+
+ PR30217, dynamic relocations using local dynamic symbols
+ glibc's ld.so ignores local dynamic symbols. It's been that way
+ forever. We therefore can't use them on dynamic relocations. Fixing
+ that problem uncovered another problem in sorting of dynamic relocs,
+ caused no doubt by copying make_iplt_section (where we don't want
+ reloc sorting by the generic gold function, we want iplt relocs last)
+ to make_lplt_section (where we do want sorting).
+
+ PR 30217
+ * powerpc.cc (branch_needs_plt_entry): New function.
+ (Target_powerpc::plt_off): Use it here..
+ (Target_powerpc::Scan::global): ..and here to correct PLT16 reloc
+ handling for forced-local global symbols.
+ (Output_data_plt_powerpc::add_entry): Rename "stash"
+ parameter "is_local". Emit relative relocs for globals that
+ are forced local, and don't set_needs_dynsym_entry.
+ (Target_powerpc::make_lplt_section): Don't create a separate
+ reloc section, use rela_dyn.
+ (Target_powerpc::make_brlt_section): Likewise.
+
+2023-03-16 Alan Modra <amodra@gmail.com>
+
+ Re: Sanity check read_section_stabs_debugging_info
+ * rddbg.c (read_section_stabs_debugging_info): Don't segfault on
+ zero size string section.
+
+2023-03-16 GDB Administrator <gdbadmin@sourceware.org>
+
+ Automatic date update in version.in
+
+2023-03-15 Tom Tromey <tromey@adacore.com>
+
+ Fix formatting in gdb/printing.py
+ According to black 23, gdb/printing.py was mis-formatted. This patch
+ fixes it.
+
+2023-03-15 Aditya Vidyadhar Kamath <Aditya.Kamath1@ibm.com>
+
+ Enable vector register visibility in core for AIX.
+ This patch enables AIX folks to see vector register contents while they
+ analyse the core file.
+
+2023-03-15 Tom de Vries <tdevries@suse.de>
+
+ [gdb/testsuite] Fix re-used exec in gdb.arch/ftrace-insn-reloc.exp
+ In test-case gdb.arch/ftrace-insn-reloc.exp we generate two executables with
+ the same name, which is confusing and known to cause trouble.
+
+ Fix this by making the executable names unique.
+
+ Tested on x86_64-linux.
+
+2023-03-15 Tom de Vries <tdevries@suse.de>
+
+ [gdb/testsuite] Fix gdb.arch/amd64-stap-special-operands.exp for remote host
+ With test-case gdb.arch/amd64-stap-special-operands.exp and host board
+ local-remote-host-notty and target board native-gdbserver I run into:
+ ...
+ (gdb) break -pstap three_arg^M
+ No probe matching objfile=`<any>', provider=`<any>', name=`three_arg'^M
+ Make breakpoint pending on future shared library load? (y or [n]) n^M
+ (gdb) FAIL: gdb.arch/amd64-stap-special-operands.exp: probe: three_arg: \
+ gdb_breakpoint: set breakpoint at -pstap three_arg
+ ...
+ due to compiling two executables with the same name, and when uploading the
+ second one from host to build, we run into:
+ ...
+ Upload from 127.0.0.1 failed, \
+ $outputs/gdb.arch/amd64-stap-special-operands/amd64-stap-special-operands: \
+ Text file busy.
+ ...
+
+ Fix this by making the executable names unique.
+
+ Tested on x86_64-linux.
+
+2023-03-15 Tom de Vries <tdevries@suse.de>
+
+ [gdb/testsuite] Fix gdb.arch/i386-pkru.exp for native-gdbserver
+ With test-case gdb.arch/i386-pkru.exp and target board native-gdbserver we run
+ into:
+ ...
+ FAIL: gdb.arch/i386-pkru.exp: variable after reading pkru
+ ...
+
+ This looks similar to the the problem for which there's already an xfail, so
+ fix this by extending the xfail matching.
+
+ Tested on x86_64-linux.
+
+ Also tested on openSUSE Tumbleweed, where all tests in the test-case pass.
+
+2023-03-15 Tom de Vries <tdevries@suse.de>
+
+ [gdb/testsuite] Unset DEBUGINFOD_URLS on remote host
+ When running test-case gdb.arch/i386-pkru.exp with host board
+ local-remote-host-notty and target board native-gdbserver on openSUSE
+ Tumbleweed (with DEBUGINFOD_URLS set), I run into:
+ ...
+ This GDB supports auto-downloading debuginfo from the following URLs:^M
+ <https://debuginfod.opensuse.org/>^M
+ Enable debuginfod for this session? (y or [n]) ^CQuit^M
+ (gdb) FAIL: gdb.arch/i386-pkru.exp: runto: run to main
+ ...
+
+ The problem is that the unsetenv for DEBUGINFOD_URLS in default_gdb_init:
+ ...
+ # If DEBUGINFOD_URLS is set, gdb will try to download sources and
+ # debug info for f.i. system libraries. Prevent this.
+ unset -nocomplain ::env(DEBUGINFOD_URLS)
+ ...
+ doesn't work on remote host.
+
+ Fix this by using "set debuginfod enabled off" for remote host.
+
+ Tested on x86_64-linux.
+
+2023-03-15 Tom de Vries <tdevries@suse.de>
+
+ [gdb/testsuite] Fix gdb.arch/amd64*.exp with local-remote-host-native.exp
+ There's a number of gdb.arch/amd64*.exp test-cases that fail with host+target
+ board local-remote-host-native.exp because of using a .S file, generated from
+ a .c file.
+
+ If a test-case compiles the .S file when executing on remote host,
+ the .S file is already copied from build to host, such that it's available for
+ the compiler.
+
+ But that's not the case for the .c file, which is needed by gdb to show a
+ source line:
+ ...
+ (gdb) continue^M
+ Continuing.^M
+ ^M
+ Breakpoint 2, fn2 (y=y@entry=25, x=x@entry=6) at amd64-entry-value-inline.c:32^M
+ 32 in gdb.arch/amd64-entry-value-inline.c^M
+ (gdb) FAIL: gdb.arch/amd64-entry-value-inline.exp: continue to breakpoint: \
+ break-here
+ ...
+
+ Fix this by using "gdb_remote_download host <.c file>".
+
+ Tested on x86_64-linux, with host+target board local-remote-host-native.
+
+2023-03-15 Nick Clifton <nickc@redhat.com>
+
+ Add --enable-linker-version option to bfd linker to add an entry in the .comment section.
+ PR 30187
+ * NEWS: Mention the new feature. * ld.texi: Document the new feature. * ldgram.y: Handle LINKER_VERSION token. * ldlang.c (lang_add_version): New function. (enable_linker_version): New global variable. * ldlang.h (land_add_version): Prototype. (enable_linker_version): Export. * ldlex.h (OPTION_ENABLE_LINKER_VERSION): Define. (OPTION_DISABLE_LINKER_VERSION): Define. * ldlex.l (LINKER_VERSION): Add token. * lexsup.c (ld_options): Add --enable-linker-version and --disable-linker-version. (parse_args): Handle the new options. * scripttempl/arclinux.sc: Remove stabs and comment sections and replace with inclusion of misc-sections.sc * scripttempl/avr.sc: Likewise. * scripttempl/dlx.sc: Likewise. * scripttempl/elf.sc: Likewise. * scripttempl/elf32cr16.sc: Likewise. * scripttempl/elf32crx.sc: Likewise. * scripttempl/elf32msp430.sc: Likewise. * scripttempl/elf64bpf.sc: Likewise. * scripttempl/elf64hppa.sc: Likewise. * scripttempl/elf_chaos.sc: Likewise. * scripttempl/elfarc.sc: Likewise. * scripttempl/elfarcv2.sc: Likewise. * scripttempl/elfd10v.sc: Likewise. * scripttempl/elfd30v.sc: Likewise. * scripttempl/elfm68hc11.sc: Likewise. * scripttempl/elfm68hc12.sc: Likewise. * scripttempl/elfm9s12z.sc: Likewise. * scripttempl/elfmicroblaze.sc: Likewise. * scripttempl/elfxgate.sc: Likewise. * scripttempl/elfxtensa.sc: Likewise. * scripttempl/epiphany_4x4.sc: Likewise. * scripttempl/ft32.sc: Likewise. * scripttempl/ip2k.sc: Likewise. * scripttempl/iq2000.sc: Likewise. * scripttempl/mep.sc: Likewise. * scripttempl/nds32elf.sc: Likewise. * scripttempl/pru.sc: Likewise. * scripttempl/v850.sc: Likewise. * scripttempl/v850_rh850.sc: Likewise. * scripttempl/visium.sc: Likewise. * scripttempl/xstormy16.sc: Likewise. * scripttempl/z80.sc: Likewise. * testsuite/ld-scripts/script.exp: Run new tests. * scripttempl/misc-sections.sc: New file. * testsuite/ld-scripts/ld-version-2.d: New file. * testsuite/ld-scripts/ld-version.d: New file. * testsuite/ld-scripts/ld-version.t: New file.
+
+ Fix an illegal memory access when disassembling a corrupt MeP file.
+ PR 30231
+ * mep.opc (mep_print_insn): Check for an out of range index.
+
+ Fix an illegal memory access when disassebling a corrupt ARM file.
+ PR 30230
+ * arm-dis.c (get_sym_code_type): Check for non-ELF symbols.
+
+2023-03-15 GDB Administrator <gdbadmin@sourceware.org>
+
+ Automatic date update in version.in
+
+2023-03-14 Tom Tromey <tromey@adacore.com>
+
+ Implement DAP variables, scopes, and evaluate requests
+ The DAP code already claimed to implement "scopes" and "evaluate", but
+ this wasn't done completely correctly. This patch implements these
+ and also implements the "variables" request.
+
+ After this patch, variables and scopes correctly report their
+ sub-structure. This also interfaces with the gdb pretty-printer API,
+ so the output of pretty-printers is available.
+
+2023-03-14 Tom Tromey <tromey@adacore.com>
+
+ Hide the implementation of gdb_mpf
+ This renames the data member of gdb_mpf and makes it private. It also
+ adds a single new method to aid in this change. Unlike the earlier
+ changes here, I did this one all together because gdb_mpf has very few
+ uses.
+
+ Rename gdb_mpq::val and make contents private
+ This changes gdb_mpq to hide its data, and renames the data member
+ from 'val' to 'm_val', following gdb convention.
+
+2023-03-14 Tom Tromey <tromey@adacore.com>
+
+ Add operators and methods to gdb_mpq
+ This adds some operators and methods to gdb_mpq, in preparation for
+ making its implementation private.
+
+ This only adds the operators currently needed by gdb. More could be
+ added as necessary.
+
+2023-03-14 Tom Tromey <tromey@adacore.com>
+
+ Rename gdb_mpz::val and make contents private
+ This changes gdb_mpz to hide its data, and renames the data member
+ from 'val' to 'm_val', following gdb convention.
+
+2023-03-14 Tom Tromey <tromey@adacore.com>
+
+ Add methods and operators to gdb_mpz
+ This adds various methods and operators to gdb_mpz, as a step toward
+ hiding the implementation.
+
+ This only adds the operators that were needed. Many more could be
+ added as required.
+
+2023-03-14 Tom Tromey <tromey@adacore.com>
+
+ Clean up gmp-utils.h includes
+ gmp-utils.h includes "defs.h", but normally the rule in gdb is that
+ the .c files include this first. This patch changes this code to
+ match the rest of gdb.
+
+2023-03-14 Tom Tromey <tromey@adacore.com>
+
+ Fix DAP frame bug with older versions of Python
+ Tom de Vries pointed out that one DAP test failed on Python 3.6
+ because gdb.Frame is not hashable.
+
+ This patch fixes the problem by using a list to hold the frames. This
+ is less efficient but there normally won't be that many frames.
+
+ Tested-by: Tom de Vries <tdevries@suse.de>
+
+2023-03-14 Nick Clifton <nickc@redhat.com>
+
+ Prevent an over large memory allocation in readelf when parsing a corrupt DWARF file.
+ PR 30227
+ * dwarf.c (process_cu_tu_index): Prevent excessive memory allocation when nused is large and ncols is zero.
+
+2023-03-14 Tom de Vries <tdevries@suse.de>
+
+ [gdb/testsuite] Add gdb.testsuite/board-sanity.exp
+ Add a test-case that tests the sanity of target/host boards.
+
+ It contains a number of tests related to remote file manipulation, exercising:
+ - remote_upload
+ - remote_download
+ - remote_file exists
+ - remote_file delete
+ which check that these work together as expected.
+
+ Tested on x86_64-linux, with all relevant gdb/testsuite/boards/*.exp boards.
+
+ For target board remote-stdio-gdbserver.exp, this revealed a trivial problem
+ with the return value of proc ${board}_file for delete, so fix this.
+
+ The test-case shows that the proc ${board}_download in
+ local-remote-host-native.exp is broken, so remove it.
+
+ Likewise for board local-remote-host.exp, so remove proc ${board}_download and
+ associated ${board}_file.
+
+ Tested on x86_64-linux.
+
+2023-03-14 Nick Clifton <nickc@redhat.com>
+
+ Adjust the decoded line output to fit into 80 columns.
+ PR 30216
+ * dwarf.c (display_debug_lines_decoded): Reduce space for filenames.
+ * testsuite/binutils-all/dw5.W: Adjust expected output.
+ * testsuite/binutils-all/objdump.WL: Adjust expected output.
+
+ Fix assembler documentation regarding data directives.
+ PR 30206
+ * doc/as.texi (Pseudo Ops): Document that data directives such as .byte and .int are not intended for encoding instructions.
+
+2023-03-14 Alan Modra <amodra@gmail.com>
+
+ objdump segfault after symbol table error
+ This memcpy segfaults if symcount is -1 (=> syms is NULL).
+ memcpy (sorted_syms, symcount ? syms : dynsyms,
+ sorted_symcount * sizeof (asymbol *));
+
+ * objdump.c (slurp_symtab): Don't leave symcount as -1 after
+ an error.
+ (slurp_dynamic_symtab): Likewise for dynsymcount.
+
+2023-03-14 Alan Modra <amodra@gmail.com>
+
+ Sanity check read_section_stabs_debugging_info
+ * rddbg.c (read_section_stabs_debugging_info): Exclude sections
+ without contents. Use bfd_malloc_and_get_section. Don't alloc
+ one extra for strings.
+
+ gas/read.c: init more statics
+ * read.c (current_name, current_label, dwarf_file, dwarf_line): Move
+ to file scope.
+ (pobegin): Tidy pop_override_ok.
+ (read_a_source_file): Make last_eol an auto var.
+ (s_reloc): Constify bfd_relocs.
+ (read_begin): Init more variables.
+
+2023-03-14 Alan Modra <amodra@gmail.com>
+
+ gas .include and .incbin
+ This fixes a bug in .include and .incbin where given an absolute path
+ the -I dirs would be searched for the path.
+
+ * read.c (include_dir_count, include_dir_maxlen): Make them size_t.
+ (search_and_open): New function.
+ (s_incbin, s_include): Use search_and_open.
+ (init_include_dir): New function.
+ (add_include_dir): Don't set initial "." dir here.
+ * read.h (include_dir_count, include_dir_maxlen): Update.
+ (init_include_dir, search_and_open): Declare.
+ * as.c (gas_early_init): Call init_include_dir.
+ * config/tc-rx.c (rx_include): Avoid warning by using size_t.
+ * config/tc-tic54x.c (tic54x_set_default_include): Simplify and
+ use notes for include path.
+ (tic54x_mlib): Use search_and_open.
+
+2023-03-14 Alan Modra <amodra@gmail.com>
+
+ gas/dwarf2dbg.c init more statics
+ * dwarf2dbg.c (dw2_line, dw2_filename): Move to file scope and..
+ (dwarf2_gen_line_info): ..renamed from here.
+ (label_num, last_used, last_used_dir_len): Move to file scope.
+ (dwarf2_init): Init moved statics, except last_used_dir_len.
+
+2023-03-14 Alan Modra <amodra@gmail.com>
+
+ gas/ecoff.c: don't use zero struct copies to init
+ It might have made sense once upon a time, but doesn't nowadays when
+ compilers expand memset inline.
+
+ * ecoff.c (add_aux_sym_tir, allocate_scope, allocate_vlinks),
+ (allocate_shash, allocate_thash, allocate_tag, allocate_forward),
+ (allocate_thead, allocate_lineno_list): Use memset rather than
+ copying zero struct.
+
+2023-03-14 Alan Modra <amodra@gmail.com>
+
+ gas/compress-debug.c init all of strm
+ * compress-debug.c (compress_init): Clear all of strm.
+
+2023-03-14 GDB Administrator <gdbadmin@sourceware.org>
+
+ Automatic date update in version.in
+
+2023-03-13 Andrew Burgess <aburgess@redhat.com>
+
+ gdb: add gdbarch::displaced_step_buffer_length
+ The gdbarch::max_insn_length field is used mostly to support displaced
+ stepping; it controls the size of the buffers allocated for the
+ displaced-step instruction, and is also used when first copying the
+ instruction, and later, when fixing up the instruction, in order to
+ read in and parse the instruction being stepped.
+
+ However, it has started to be used in other places in GDB, for
+ example, it's used in the Python disassembler API, and it is used on
+ amd64 as part of branch-tracing instruction classification.
+
+ The problem is that the value assigned to max_insn_length is not
+ always the maximum instruction length, but sometimes is a multiple of
+ that length, as required to support displaced stepping, see rs600,
+ ARM, and AArch64 for examples of this.
+
+ It seems to me that we are overloading the meaning of the
+ max_insn_length field, and I think that could potentially lead to
+ confusion.
+
+ I propose that we add a new gdbarch field,
+ gdbarch::displaced_step_buffer_length, this new field will do
+ exactly what it says on the tin; represent the required displaced step
+ buffer size. The max_insn_length field can then do exactly what it
+ claims to do; represent the maximum length of a single instruction.
+
+ As some architectures (e.g. i386, and amd64) only require their
+ displaced step buffers to be a single instruction in size, I propose
+ that the default for displaced_step_buffer_length will be the
+ value of max_insn_length. Architectures than need more buffer space
+ can then override this default as needed.
+
+ I've updated all architectures to setup the new field if appropriate,
+ and I've audited all calls to gdbarch_max_insn_length and switched to
+ gdbarch_displaced_step_buffer_length where appropriate.
+
+ There should be no user visible changes after this commit.
+
+ Approved-By: Simon Marchi <simon.marchi@efficios.com>
+
+2023-03-13 Andrew Burgess <aburgess@redhat.com>
+
+ gdbarch: make invalid=True the default for all Components
+ This commit switches the default value for the 'invalid' field from
+ False to True. All components that previous set the invalid field to
+ True explicitly have had the field removed.
+
+ I think that True is a good choice for the default, this means that we
+ now get the validity checks by default, and if anyone adds a new
+ Component they need to make a choice to add an 'invalid=False' line
+ and disable the validation.
+
+ The flip side of this is that 'invalid=False' seems to be far more
+ common than 'invalid=True'. But I don't see a huge problem with this,
+ we shouldn't be aiming to reduce our typing, rather we should choose
+ based on which is least likely to introduce bugs. I think assuming
+ that we should do a validity check will achieve that.
+
+ Some additional components need to have an 'invalid=False' line added
+ to their definition, these are components that have a predefault
+ value, which is sufficient; the tdep code doesn't need to replace this
+ value if it doesn't want to.
+
+ Without adding the 'invalid=False' these components would be
+ considered to be invalid if they have not changed from their
+ predefault value -- but the predefault is fine.
+
+ There's no change in the generated code after this commit, so there
+ will be no user visible changes after this commit.
+
+ Approved-By: Simon Marchi <simon.marchi@efficios.com>
+
+2023-03-13 Andrew Burgess <aburgess@redhat.com>
+
+ gdbarch: remove some unneeded predefault="0" from gdbarch_components.py
+ I noticed that there are a bunch of 'predefault="0"' lines in
+ gdbarch_components.py, and that some (just some, not all) of these are
+ not needed.
+
+ The gdbarch is already zero initialized, but these lines seem to
+ exists so that we can know when to compare against "0" and when to
+ compare against "NULL". At least, this seems to be useful in some
+ places in the generated code.
+
+ Specifically, if we remove the predefault="0" line from the
+ max_insn_length component then we end up generating a line like:
+
+ gdb_assert (gdbarch->max_insn_length != NULL);
+
+ which doesn't compile as we compare a ULONGEST to NULL.
+
+ In this commit I remove all the predefault="0" lines that I claim are
+ obviously not needed. These are lines for components that are not
+ Values (i.e. the component holds a function pointer anyway), or for
+ Value components that hold a pointer type, in which case using NULL is
+ fine.
+
+ The only changes after this commit are some fields that have nullptr
+ as their initial value, and gcore_bfd_target now compares to NULL not
+ 0 in gdbarch_gcore_bfd_target_p, which, given the field is of type
+ 'const char *', seems like an improvement.
+
+ Approved-By: Simon Marchi <simon.marchi@efficios.com>
+
+2023-03-13 Andrew Burgess <aburgess@redhat.com>
+
+ gdbarch: improve generation of validation in gdbarch getters
+ We currently generate some validation code within the gdbarch getter
+ methods.
+
+ This commit adjusts the algorithm used to generate this validation
+ slightly to make the gdbarch.py code (I think) clearer; there's no
+ significant changes to what is generated.
+
+ The validation algorithm for gdbarch values is now:
+
+ - If the Value has an 'invalid' field that is a string, use that for
+ validation,
+
+ - If the Value has its 'predicate' field set to true, then check the
+ predicate returns true, this ensures the predicate has been
+ called,
+
+ - If the Value has its 'invalid' field set to True, or the Value has
+ 'postdefault' field, then check the fields has changed from its
+ initial value,
+
+ - Otherwise no validation is performed.
+
+ The only changes after this commit are:
+
+ - Some comments change slightly, and
+
+ - For 'gcore_bfd_target' and 'max_insn_length' we now validate by
+ calling the predicate rather than checking the field value
+ directly, the underlying check being performed is unchanged
+ though.
+
+ There should be no user visible changes after this commit.
+
+ Approved-By: Simon Marchi <simon.marchi@efficios.com>
+
+2023-03-13 Andrew Burgess <aburgess@redhat.com>
+
+ gdbarch: use predefault for more value components within gdbarch
+ For some reason the following value components of gdbarch:
+
+ bfloat16_format
+ half_format
+ float_format
+ double_format
+ long_double_format
+ so_ops
+
+ All use a postdefault but no predefault to set the default value for
+ the component.
+
+ As the postdefault values for these components are all constant
+ pointers that don't depend on other fields within the gdbarch, then I
+ don't see any reason why we couldn't use a predefault instead.
+
+ So lets do that.
+
+ Approved-By: Simon Marchi <simon.marchi@efficios.com>
+
+2023-03-13 Andrew Burgess <aburgess@redhat.com>
+
+ gdb/gdbarch: remove the 'invalid=None' state from gdbarch_components.py
+ This commit ensures that the 'invalid' property of all components is
+ either True, False, or a string.
+
+ Additionally, this commit allows a component to have both a predicate
+ and for the 'invalid' property to be a string.
+
+ Removing the option for 'invalid' to be None allows us to simplify the
+ algorithms in gdbarch.py a little.
+
+ Allowing a component to have both a predicate and an 'invalid' string
+ means that we can validate the value that a tdep sets into a field,
+ but also allow a predicate to ensure that the field has changed from
+ the default.
+
+ This functionality isn't going to be used in this series, but I have
+ tested it locally and believe that it would work, and this might make
+ it easier for others to add new components in the future.
+
+ In gdbarch_types.py, I've updated the type annotations to show that
+ the 'invalid' field should not be None, and I've changed the default
+ for this field from None to False.
+
+ The change to using False as the default is temporary. Later in this
+ series I'm going to change the default to True, but we need more fixes
+ before that can be done.
+
+ Additionally, in gdbarch_types.py I've removed an assert from
+ Component.get_predicate. This assert ensured that we didn't have the
+ predicate field set to True and the invalid field set to a string.
+ However, no component currently uses this configuration, and after
+ this commit, that combination is now supported, so the assert can be
+ removed.
+
+ As a consequence of the gdbarch_types.py changes we see some
+ additional comments generated in gdbarch.c about verification being
+ skipped due to the invalid field being False. This comment is inline
+ with plenty of other getters that also have a similar comment. Plenty
+ of the getters do have validation, so I think it is reasonable to have
+ a comment noting that the validation has been skipped for a specific
+ reason, rather than due to some bug.
+
+ In gdbarch_components.py I've had to add 'invalid=True' for two
+ components: gcore_bfd_target and max_insn_length, without this the
+ validation in the gdbarch getter would disappear.
+
+ And in gdbarch.py I've reworked the logic for generating the
+ verify_gdbarch function, and for generating the getter functions.
+
+ The logic for generating the getter functions is still not ideal, I
+ ended up having to add this additional logic block:
+
+ elif c.postdefault is not None and c.predefault is not None:
+ print(" /* Check variable changed from pre-default. */", file=f)
+ print(f" gdb_assert (gdbarch->{c.name} != {c.predefault});", file=f)
+
+ which was needed to ensure we continued to generate the same code as
+ before, without this the fact that invalid is now False when it would
+ previously have been None, meant that we dropped the gdb_assert in
+ favour of a comment like:
+
+ print(f" /* Skip verify of {c.name}, invalid_p == 0 */", file=f)
+
+ which is clearly not a good change. We could potentially look at
+ improving this in a later commit, but I don't plan to do that in this
+ series.
+
+ Approved-By: Simon Marchi <simon.marchi@efficios.com>
+
+2023-03-13 Andrew Burgess <aburgess@redhat.com>
+
+ gdb/gdbarch: split postdefault setup from invalid check in gdbarch.py
+ Restructure how gdbarch.py generates the verify_gdbarch function.
+ Previously the postdefault handling was bundled together with the
+ validation. This means that a field can't have both a postdefault,
+ and set its invalid attribute to a string.
+
+ This doesn't seem reasonable to me, I see no reason why a field can't
+ have both a postdefault (used when the tdep doesn't set the field),
+ and an invalid expression, which can be used to validate the value
+ that a tdep might set.
+
+ In this commit I restructure the verify_gdbarch generation code to
+ allow the above, there is no change in the actual generated code in
+ this commit, that will come in later commit.
+
+ Approved-By: Simon Marchi <simon.marchi@efficios.com>
+
+2023-03-13 Andrew Burgess <aburgess@redhat.com>
+
+ gdb/gdbarch: remove yet more 'invalid=True' from gdbarch_components.py
+ Following on from the previous commit, this commit removes yet more
+ 'invalid=True' lines from gdbarch_components.py where the invalid
+ setting has no effect.
+
+ Due to the algorithm used in gdbarch.py for generated verify_gdbarch,
+ if a component has a postdefault value then no invalid check will ever
+ be generated for the component, as such setting 'invalid=True' on the
+ component is pointless. This commit removes the setting of invalid.
+
+ There is no change in the generated code after this commit.
+
+ Approved-By: Simon Marchi <simon.marchi@efficios.com>
+
+2023-03-13 Andrew Burgess <aburgess@redhat.com>
+
+ gdb/gdbarch: remove unused 'invalid=True' from gdbarch_components.py
+ Due to the algorithm used to generate verify_gdbarch in gdbarch.py, if
+ a component has a predicate, then a validation check will never be
+ generated.
+
+ There are a bunch of components that are declared with both a
+ predicate AND have 'invalid=True' set. The 'invalid=True' has no
+ effect.
+
+ In this commit I clean things up by removing all these additional
+ 'invalid=True' lines. There's no change in any of the generated files
+ after this commit.
+
+ Approved-By: Simon Marchi <simon.marchi@efficios.com>
+
+2023-03-13 Tom Tromey <tromey@adacore.com>
+
+ Fix crash in inside_main_func
+ gdb 13.1 crashes while running the rust compiler's debugger tests.
+ The crash has a number of causes.
+
+ First, the rust compiler still uses the C++-like _Z mangling, but with
+ its own twist -- some hex digits added to the end of a symbol. So,
+ while gdb finds the correct name of "main":
+
+ (top-gdb) p name
+ $13 = 0x292e0c0 "rustc_gdb_1031745::main"
+
+ It isn't found in the minsyms, because C++ demangling yields:
+
+ [99] t 0x90c0 _ZN17rustc_gdb_10317454main17h5b5be7fe16a97225E section .text rustc_gdb_1031745::main::h5b5be7fe16a97225 zko06yobckx336v
+
+ This could perhaps be fixed. I also filed a new PR to suggest
+ preferring the linkage name of the main program.
+
+ Next, the rust compiler emits both a DW_TAG_subprogram and a
+ DW_TAG_namespace for "main". This happens because the file is named
+ "main.rs" -- i.e., the bug is specific to the source file name. The
+ crash also seems to require the nested function inside of 'main', at
+ least for me. The namespace always is generated, but perhaps this
+ changes the ordering in the DWARF.
+
+ When inside_main_func looks up the main symbol, it finds the namespace
+ symbol rather than the function. (I filed a bug about fixing gdb's
+ symbol tables -- long overdue.)
+
+ Meanwhile, as I think it's important to fix this crash sooner rather
+ than later, this patch changes inside_main_func to check that the
+ symbol that is found is LOC_BLOCK. This perhaps should have been done
+ in the first place, anyway.
+
+ Bug: https://sourceware.org/bugzilla/show_bug.cgi?id=30158
+
+2023-03-13 Tom de Vries <tdevries@suse.de>
+
+ [gdb/testsuite] Fix gdb.python/tui-window-factory.exp for remote host
+ When running gdb.python/tui-window.exp with host board
+ local-remote-host-notty and target board native-gdbserver, I get:
+ ...
+ FAIL: gdb.python/tui-window-factory.exp: msg_2: \
+ check test_window box (box check: ul corner is l, not +)
+ ...
+
+ The problem is that the result of Term::prepare_for_tui is not checked.
+
+ Fix this by adding the missing check.
+
+ Tested on x86_64-linux.
+
+2023-03-13 Tom de Vries <tdevries@suse.de>
+
+ [gdb/testsuite] Fix gdb.python/tui-window.exp for remote host
+ When running gdb.python/tui-window.exp with host board
+ local-remote-host-notty and target board native-gdbserver, I get:
+ ...
+ UNSUPPORTED: gdb.python/tui-window.exp: TUI not supported
+ FAIL: gdb.python/tui-window.exp: test title
+ ...
+
+ Fix this by adding the missing return after the unsupported.
+
+ Tested on x86_64-linux.
+
+2023-03-13 Tom de Vries <tdevries@suse.de>
+
+ [gdb/testsuite] Fix gdb.tui/completion.exp for local-remote-host-notty
+ When running test-case gdb.tui/completion.exp with host board
+ local-remote-host-notty and target board native-gdbserver, I get:
+ ...
+ FAIL: gdb.tui/completion.exp: completion of layout names: \
+ tab completion (timeout)
+ ...
+
+ The test-case contains a few tests that do tab completion, which requires
+ readline, which is unavailable with host board local-remote-host-notty.
+
+ Fix this by adding the missing check for readline_is_used.
+
+ Tested on x86_64-linux.
+
+2023-03-13 Tom de Vries <tdevries@suse.de>
+
+ [gdb/testsuite] Fix gdb.tui/tui-layout.exp for remote host
+ When running test-case gdb.tui/tui-layout.exp with host board
+ local-remote-host-notty and target board native-gdbserver, I get:
+ ...
+ FAIL: gdb.tui/tui-layout.exp: terminal=dumb: execution=false: layout=asm: \
+ layout asm (timeout)
+ ...
+
+ The problem is that the test-case expects that the default "setenv TERM dumb"
+ has effect, which is not the case for remote host.
+
+ Fix this by skipping the test for remote host.
+
+ Tested on x86_64-linux.
+
+2023-03-13 Tom de Vries <tdevries@suse.de>
+
+ [gdb/testsuite] Fix gdb.tui/tui-nl-filtered-output.exp for remote host
+ When running test-case gdb.tui/tui-nl-filtered-output.exp with host board
+ local-remote-host-notty and target board native-gdbserver, I get:
+ ...
+ FAIL: gdb.tui/tui-nl-filtered-output.exp: check printf output
+ ...
+
+ The problem is that Term::enter_tui is returning 0, but the test-case doesn't
+ check for this, and consequently runs unsupported tests.
+
+ Fix this by adding the missing check.
+
+ Tested on x86_64-linux.
+
+2023-03-13 Tom de Vries <tdevries@suse.de>
+
+ [gdb/testsuite] Require ![is_remote host] for TUI
+ When running test-case gdb.tui/corefile-run.exp with both host and target board
+ local-remote-host-native.exp, we run into:
+ ...
+ FAIL: gdb.tui/corefile-run.exp: load corefile
+ ...
+ while this passes with USE_TUI=0.
+
+ The problem is that the TUI setup code uses "setenv TERM ansi", which has no
+ effect on remote host.
+
+ I can confirm this analysis by working around this problem in
+ local-remote-host-native.exp like this:
+ ...
+ - spawn $RSH -t -l $username $remote $cmd
+ + spawn $RSH -t -l $username $remote "export TERM=ansi; $cmd"
+ ...
+
+ For now, simply make TUI unsupported for remote host, by returning 0 in
+ prepare_for_tui.
+
+ Tested on x86_64-linux.
+
+2023-03-13 Tom de Vries <tdevries@suse.de>
+
+ [gdb/testsuite] Handle USE_TUI in gdb.tui/corefile-run.exp
+ Once in a while I find myself rewriting a TUI test-case into a non-TUI
+ test-case, to better understand whether the problem I'm looking at is
+ related to the TUI or not.
+
+ I've got the impression that I've done this sufficiently often that it's worth
+ committing the non-TUI version, so having just written a non-TUI version of
+ gdb.tui/corefile-run.exp, let's commit it.
+
+ The non-TUI version can be enabled by doing:
+ ...
+ $ make check "RUNTESTFLAGS=gdb.tui/corefile-run.exp USE_TUI=0"
+ ...
+
+ Also remove hard-coding of a source line number.
+
+ Tested on x86_64-linux.
+
+2023-03-13 Tom de Vries <tdevries@suse.de>
+
+ [gdb/testsuite] Fix untested message in gdb.tui/corefile-run.exp
+ In test-case gdb.tui/corefile-run.exp, we have this bit:
+ ...
+ require !use_gdb_stub
+ if { [target_info gdb_protocol] == "extended-remote" } {
+ untested "not supported"
+ return
+ }
+ ...
+
+ So with target board native-gdbserver we get:
+ ...
+ UNSUPPORTED: gdb.tui/corefile-run.exp: require failed: !use_gdb_stub
+ ...
+ and with target board native-extended-gdbserver instead:
+ ...
+ UNTESTED: gdb.tui/corefile-run.exp: not supported
+ ...
+
+ Fix this by:
+ - adding an optional argument target_description to proc
+ target_can_use_run_cmd
+ - handling the target_description == core &&
+ [target_info gdb_protocol] == "extended-remote" case in the proc
+ - using require {target_can_use_run_cmd core}
+ such that now in both cases we have:
+ ...
+ UNSUPPORTED: gdb.tui/corefile-run.exp: require failed: \
+ target_can_use_run_cmd core
+ ...
+
+ Tested on x86_64-linux.
+
+2023-03-13 Tom de Vries <tdevries@suse.de>
+
+ [gdb/testsuite] Fix gdb.threads/step-bg-decr-pc-switch-thread.exp for native-gdbserver
+ With test-case gdb.threads/step-bg-decr-pc-switch-thread.exp and target board
+ native-gdbserver, I run into:
+ ...
+ (gdb) UNSUPPORTED: gdb.threads/step-bg-decr-pc-switch-thread.exp: \
+ switch to main thread
+ Remote debugging from host ::1, port 43914^M
+ monitor exit^M
+ Cannot execute this command while the target is running.^M
+ Use the "interrupt" command to stop the target^M
+ and then try again.^M
+ (gdb) WARNING: Timed out waiting for EOF in server after monitor exit
+ ...
+
+ Fix this by following the advice and issuing an interrupt command, allowing
+ the following monitor exit command to succeed.
+
+ Tested on x86_64-linux.
+
+2023-03-13 Bruno Larsen <blarsen@redhat.com>
+
+ [gdb/obvious]: fix python formatting for test gdb.python/py-typeprint.py
+ python black formatter was complaining about the formatting of
+ gdb.python/py-typeprint.py, so this commit corrects it.
+
+2023-03-13 Bruno Larsen <blarsen@redhat.com>
+
+ gdb/testsuite: add regression test for per-objfile typeprinters
+ PR python/17136 reported an unhandled exception when using typeprinters
+ only valid on some objfiles, rather than being a global typeprinter. The
+ fix was accepted without a regression test, and we've been carrying one
+ out-of-tree for a while but I think it's worth upstreaming. The code
+ itself was developed by Jan Kratochvil.
+
+ Co-Authored-By: Jan Kratochvil <jkratochvil@azul.com>
+ Bug: https://sourceware.org/bugzilla/show_bug.cgi?id=17136
+ Reviewed-By: Andrew Burgess <aburgess@redhat.com>
+ Approved-By: Tom Tromey <tom@tromey.com>
+
+2023-03-13 Tom Tromey <tromey@adacore.com>
+
+ Remove dead code from scalar_binop
+ scalar_binop has code for "&&" and "||", but I think this code can't
+ currently be run -- and, furthermore, it doesn't make sense to have
+ this code here, as the point of these operators is to short-circuit
+ evaluation.
+
+ This patch removes the dead code.
+
+ Regression tested on x86-64 Fedora 36.
+
+ Approved-by: Kevin Buettner <kevinb@redhat.com>
+
+2023-03-13 Luis Machado <luis.machado@arm.com>
+
+ aarch64: Expand documentation of XML features
+ Similar to the arm target documentation situation, the documentation of the
+ XML features for AArch64 targets is rather brief. I have received the same
+ feedback that what gdb carries in the documentation is quite unclear from the
+ perspective of what debugging servers should define in the XML features, how and
+ what the outcome is in gdb.
+
+ This patch attempts to clarify a bit more what all the possible features are.
+
+2023-03-13 Luis Machado <luis.machado@arm.com>
+
+ arm: Expand documentation of XML features
+ The documentation of the XML features for Arm targets is very brief. I have
+ received feedback saying it is quite unclear from the perspective of the
+ debugging servers what should be defined in the XML features, how and
+ what the outcome is in gdb.
+
+ This patch attempts to clarify a bit more what all the possible features are.
+
+2023-03-13 GDB Administrator <gdbadmin@sourceware.org>
+
+ Automatic date update in version.in
+
+2023-03-12 GDB Administrator <gdbadmin@sourceware.org>
+
+ Automatic date update in version.in
+
+2023-03-11 Vladimir Mezentsev <vladimir.mezentsev@oracle.com>
+
+ gprofng: fix the Dwarf reader
+ gprofng/ChangeLog
+ 2023-03-10 Vladimir Mezentsev <vladimir.mezentsev@oracle.com>
+
+ gprofng/src/DwarfLib.cc (DwrLineRegs::getPath): Add a DW_AT_comp_dir
+ string if the directoty table has relative names.
+
+2023-03-11 Tom Tromey <tom@tromey.com>
+
+ Change linetable_entry::is_stmt to bool
+ This changes linetable_entry::is_stmt to type bool, rather than
+ unsigned.
+
+ Approved-By: Simon Marchi <simon.marchi@efficios.com>
+
+2023-03-11 Tom Tromey <tom@tromey.com>
+
+ Remove extra scopes from objfile_relocate1
+ objfile_relocate1 introduces new scopes that aren't necessary. I
+ noticed this while working on an earlier patch in this series. This
+ patch removes these.
+
+ Approved-By: Simon Marchi <simon.marchi@efficios.com>
+
+2023-03-11 Tom Tromey <tom@tromey.com>
+
+ Constify linetables
+ Linetables no longer change after they are created. This patch
+ applies const to them.
+
+ Note there is one hack to cast away const in mdebugread.c. This code
+ allocates a linetable using 'malloc', then later copies it to the
+ obstack. While this could be cleaned up, I chose not to do so because
+ I have no way of testing it.
+
+ Approved-By: Simon Marchi <simon.marchi@efficios.com>
+
+2023-03-11 Tom Tromey <tom@tromey.com>
+
+ Change linetables to be objfile-independent
+ This changes linetables to not add the text offset to the addresses
+ they contain. I did this in a few steps, necessarily combined
+ together in one patch: I renamed the 'pc' member to 'm_pc', added the
+ appropriate accessors, and then recompiled. Then I fixed all the
+ errors. Where possible I generally chose to use the raw_pc accessor,
+ as it is less expensive.
+
+ Note that this patch discounts the possibility that the text section
+ offset might cause wraparound in the addresses in the line table.
+ However, this was already discounted -- in particular,
+ objfile_relocate1 did not re-sort the table in this scenario. (There
+ was a bug open about this, but as far as I can tell this has never
+ happened, it's not even clear what inspired that bug.)
+
+ Approved-By: Simon Marchi <simon.marchi@efficios.com>
+
+2023-03-11 Tom Tromey <tom@tromey.com>
+
+ Add operator< and operator== to linetable_entry
+ This adds a couple of comparison operators to linetable_entry, and
+ simplifies both the calls to sort and one other spot that checks for
+ equality.
+
+ Approved-By: Simon Marchi <simon.marchi@efficios.com>
+
+2023-03-11 GDB Administrator <gdbadmin@sourceware.org>
+
+ Automatic date update in version.in
+
+2023-03-10 Vladimir Mezentsev <vladimir.mezentsev@oracle.com>
+
+ gprofng: PR30195 [display text] Source code location can not be found
+ gprofng/ChangeLog
+ 2023-03-10 Vladimir Mezentsev <vladimir.mezentsev@oracle.com>
+
+ PR gprofng/30195
+ gprofng/src/DwarfLib.cc (DwrLineRegs::reset): Set 'file = 1;'.
+
+2023-03-10 John Baldwin <jhb@FreeBSD.org>
+
+ PR gdb/30214: Prefer local include paths to system include paths
+ Some systems may install binutils headers into a system location
+ (e.g. /usr/local/include on FreeBSD) which may also include headers
+ for other external packages used by GDB such as zlib or zstd. If a
+ system include path such as /usr/local/include is added before local
+ include paths to directories within a clone or release tarball, then
+ headers from the external binutils package are used which can result
+ in build failures if the external binutils package is out of sync with
+ the version of GDB being built.
+
+ To fix, sort the include paths in INTERNAL_CFLAGS_BASE to add CFLAGS
+ for "local" componenets before external components.
+
+ Bug: https://sourceware.org/bugzilla/show_bug.cgi?id=30214
+ Reviewed-By: Tom Tromey <tom@tromey.com>
+
+2023-03-10 Fangrui Song <maskray@google.com>
+
+ ld: Allow R_386_GOT32 for call *__tls_get_addr@GOT(%reg)
+ Similar to d58854b6dd88e05dbf2a5d1c32c5acb7bd6ea274 for x86_64.
+
+ _Thread_local int a;
+ int main() { return a; }
+
+ % gcc -m32 -fno-plt -fpic a.c -fuse-ld=bfd -Wa,-mrelax-relocations=no
+ /usr/bin/ld.bfd: /tmp/ccR8Yexy.o: TLS transition from R_386_TLS_GD to R_386_TLS_IE_32 against `a' at 0x15 in section `.text' failed
+ /usr/bin/ld.bfd: failed to set dynamic section sizes: bad value
+ collect2: error: ld returned 1 exit status
+
+ This commit fixes the issue.
+
+ There is an argument that the -fno-plt TLS sequence was added after
+ R_386_GOT32X was required for call *func@GOT(%ebx), so R_386_GOT32 was
+ intended to be unsupported.
+
+ Unfortunately this standpoint has caused interop difficulty: some
+ projects specify -mrelax-relocations=no to build relocatable object
+ files compatible with older linkers (e.g.
+ https://github.com/IHaskell/IHaskell/issues/636) or do so by accident
+ (e.g. https://github.com/rust-lang/rust/pull/106511 not addressed as of
+ today). Many uses have not been cleaned up in practice, and compiling
+ with -fno-plt will lead to the `TLS transition from R_386_TLS_GD ...`
+ error which is hard to reason about.
+
+ It seems easier to apply this simple change to prevent the footgun.
+
+ PR ld/24784
+ * bfd/elf32-i386.c (elf_i386_check_tls_transition): Allow R_386_GOT32.
+
+2023-03-10 Fangrui Song <maskray@google.com>
+
+ ld: Allow R_X86_64_GOTPCREL for call *__tls_get_addr@GOTPCREL(%rip)
+ _Thread_local int a;
+ int main() { return a; }
+
+ % gcc -fno-plt -fpic a.c -fuse-ld=bfd -Wa,-mrelax-relocations=no
+ /usr/bin/ld.bfd: /tmp/ccSSBgrg.o: TLS transition from R_X86_64_TLSGD to R_X86_64_GOTTPOFF against `a' at 0xd in section `.text' failed
+ /usr/bin/ld.bfd: failed to set dynamic section sizes: bad value
+ collect2: error: ld returned 1 exit status
+
+ This commit fixes the issue.
+
+ There is an argument that the -fno-plt TLS sequence was added after
+ R_X86_64_GOTPCRELX was required for call, so R_X86_64_GOTPCREL was
+ intended to be unsupported.
+
+ Unfortunately this standpoint has caused interop difficulty: some
+ projects specify -mrelax-relocations=no to build relocatable object
+ files compatible with older linkers (e.g.
+ https://github.com/IHaskell/IHaskell/issues/636) or do so by accident
+ (e.g. https://github.com/rust-lang/rust/pull/106511 not addressed as of
+ today). Many uses have not been cleaned up in practice, and compiling
+ with -fno-plt will lead to the `TLS transition from R_X86_64_TLSGD ...`
+ error which is hard to reason about.
+
+ There is another argument which may be weaker but relevant to the
+ necessity of -mrelax-relocations=no: HWAddressSanitizer x86-64 will
+ likely need some assembler support to disable relaxation. Without the
+ support and if the compiler needs to support many gas version, the
+ simplest solution would be to use -Wa,-mrelax-relocations=no.
+
+ PR ld/24784
+ * bfd/elf64-x86-64.c (elf_x86_64_check_tls_transition): Allow
+ R_X86_64_GOTPCREL.
+
+2023-03-10 Tom de Vries <tdevries@suse.de>
+
+ [gdb/testsuite] Fix gdb.python/py-completion.exp
+ With test-case gdb.python/py-completion.exp and target board
+ native-extended-gdbserver I get this warning:
+ ...
+ (gdb) PASS: gdb.python/py-completion.exp: discard #2
+ completefilecommandcond $outputs/gdb.python/py-completion/py-completion-t^G\
+ PASS: gdb.python/py-completion.exp: completefilecommandcond completion
+ Remote debugging from host ::1, port 53346^M
+ monitor exit^M
+ not implemented^M
+ (gdb) WARNING: Timed out waiting for EOF in server after monitor exit
+ ...
+
+ Fix this by adding the missing "discard #3", such that we have instead:
+ ...
+ (gdb) PASS: gdb.python/py-completion.exp: discard #2
+ completefilecommandcond $outputs/gdb.python/py-completion/py-completion-t^G\
+ PASS: gdb.python/py-completion.exp: completefilecommandcond completion
+ ^M
+ not implemented^M
+ (gdb) PASS: gdb.python/py-completion.exp: discard #3
+ Remote debugging from host ::1, port 36278^M
+ monitor exit^M
+ (gdb)
+ ...
+
+ Tested on x86_64-linux.
+
+2023-03-10 Tom de Vries <tdevries@suse.de>
+
+ [gdb/testsuite] Fix gdb.python/py-cmd.exp
+ [ Using $pp as shorthand for the pagination prompt
+ "--Type <RET> for more, q to quit, c to continue without paging--". ]
+
+ The test-case gdb.python/py-cmd.exp passes, but the handling of the
+ test_multiline command output looks a bit odd:
+ ...
+ (gdb) test_multiline
+ test_multiline output
+ ...
+ test_multiline output
+ $ppPASS: gdb.python/py-cmd.exp: verify pagination from test_multiline
+ q
+ test_multiline
+ Quit
+ (gdb) test_multiline
+ test_multiline output
+ ...
+ test_multiline output
+ $ppPASS: gdb.python/py-cmd.exp: verify pagination from test_multiline: q
+ ...
+
+ What happens is:
+ - a test_multiline command is issued
+ - some output is printed, followed by a pagination prompt
+ - the test-case concludes that pagination occurred, and produces a PASS
+ - "q\n" is replied to the pagination prompt
+ - without waiting for response to the "q\n", another test_multiline command is
+ issued
+ - in response to the "q\n" we get "Quit\n(gdb) "
+ - some output is printed, followed by a pagination prompt
+ - the test-case concludes that there's a valid response to the "q\n", and
+ produces a PASS, consuming the second pagination prompt, but without a reply.
+
+ My conclusion is that the second test_multiline command is unintentional, so fix
+ this by removing it.
+
+ Without it, we have the more straightforward:
+ ...
+ (gdb) test_multiline
+ test_multiline output
+ ...
+ test_multiline output
+ $ppPASS: gdb.python/py-cmd.exp: verify pagination from test_multiline
+ q
+ Quit
+ (gdb) PASS: gdb.python/py-cmd.exp: verify pagination from test_multiline: q
+ ...
+
+ This also fixes the following warning with target board native-gdbserver:
+ ...
+ WARNING: Timed out waiting for EOF in server after monitor exit
+ ...
+
+ Tested on x86_64-linux.
+
+2023-03-10 Tom de Vries <tdevries@suse.de>
+
+ [gdb/testsuite] Fix py-autoloaded-pretty-printers-in-newobjfile-event.exp for remote target
+ With test-case gdb.python/py-autoloaded-pretty-printers-in-newobjfile-event.exp
+ and target board remote-gdbserver-on-localhost, I run into:
+ ...
+ FAIL: $exp: runto: run to main
+ ...
+
+ I can easily fix this using "gdb_load_shlib $binfile_lib", but then run into:
+ ...
+ (gdb) print all_good^M
+ $1 = false^M
+ (gdb) FAIL: $exp: print all_good
+ info pretty-printer^M
+ ...
+
+ Sysroot is set to "target:", so gdb downloads the shared library from the target
+ (Using $so as shorthand for
+ libpy-autoloaded-pretty-printers-in-newobjfile-event.so):
+ ...
+ Reading /home/remote-target/$so from remote target...^M
+ ...
+ and internally refers to it as "target:/home/remote-target/$so".
+
+ In load_auto_scripts_for_objfile, gdb gives up trying to auto-load scripts
+ for $so once it checks for is_target_filename.
+
+ Fix this by declaring auto-load unsupported if sysroot starts with "target:".
+
+ Tested on x86_64-linux.
+
+2023-03-10 Tom de Vries <tdevries@suse.de>
+
+ [gdb/testsuite] Fix gdb.python/py-event-load.exp for remote target
+ Fix test-case gdb.python/py-event-load.exp for target board
+ remote-gdbserver-on-localhost using gdb_download_shlib.
+
+ Tested on x86_64-linux.
+
+2023-03-10 Tom Tromey <tom@tromey.com>
+
+ Use require with test_compiler_info
+ One spot that checks test_compiler_info can be switched to use
+ 'require'.
+
+ More uses of require with istarget
+ I found a few more spots that check istarget that can be switched to
+ use 'require'.
+
+ Use require with gdb_skip_stdio_test
+ One use of gdb_skip_stdio_test can use 'require'.
+
+ Use require with target_info
+ This changes many tests to use 'require' when checking target_info.
+ In a few spots, the require is hoisted to the top of the file, to
+ avoid doing any extra work when the test is going to be skipped
+ anyway.
+
+2023-03-10 Tom Tromey <tromey@adacore.com>
+
+ Move allocate_stub_method to stabsread.c
+ allocate_stub_method is only called from stabsread.c, and I don't
+ think it will be needed anywhere else. So, move it and make it
+ static. Tested by rebuilding.
+
+2023-03-10 Alan Modra <amodra@gmail.com>
+
+ Revert ld ASCII support
+ Revert "Prevent the ASCII linker script directive from generating huge amounts of padding if the size expression is not a constant."
+ This reverts commit adbe951fc95943016325af08d677f18e8c177ac1.
+
+ Revert "ld test asciz and ascii fails"
+ This reverts the ascii.d part of commit 5f497256bee624f0fa470949aa41534093bc5b25.
+
+ Revert "Add support for the ASCII directive inside linker scripts."
+ This mostly reverts commit 9fe129a4105bb59398f73ce96938a94f19265b79
+ leaving the asciz.d and asciz.t changes in place.
+
+2023-03-10 Alan Modra <amodra@gmail.com>
+
+ Revert ld DIGEST support
+ This is a hopefully temporary reversion of new ld features for
+ embedded processors by Ulf Samuelsson, plus some followup patches.
+
+ Squashed together from the following:
+
+ Revert "lddigest 32-bit support and gcc-4 compile errors"
+ This reverts commit d7ee19be87110a8f5342cec6e323d83d01c641d1.
+
+ Revert "ld: Use correct types for crc64 calculations"
+ This reverts commit 9a534b9f8e3d0f3cdb5a20f19ff165693fbb84d2.
+
+ Revert "Re: DIGEST: testsuite"
+ This reverts commit c8e85484d8a0fe9f7b88e00a6b9ae63bcb53ba32.
+
+ Revert "Regen potfiles"
+ This reverts commit 4d98c966f8bf305ab25badd34cb295631873cf7c.
+
+ Revert "DIGEST: Makefile.*"
+ This reverts commit 78ef6ab03f56ce83a606d974bb8a9f34b5d6e0b7.
+
+ Revert "DIGEST: calculation"
+ This reverts commit 5243990191e683d5066d3dd622c76deaba0bf15c.
+
+ Revert "DIGEST: ldlang.*: add timestamp"
+ This reverts commit bd9466d4aa277a469a9d8b12f0a6e6fa51678e36.
+
+ Revert "DIGEST: ldmain.c"
+ This reverts commit c8f8653fa7eeb3dc0769ac23039eadb5c5f09dff.
+
+ Revert "DIGEST: ldgram.y"
+ This reverts commit d73c01be2669e9c5267fab669a269f95a32048c9.
+
+ Revert "DIGEST: ldlex.l"
+ This reverts commit 48b5163a9dd5759cc87171331bbd6e902c547b5a.
+
+ Revert "DIGEST: testsuite"
+ This reverts commit a4135d1a4886400ea29af2da782dd8dd40ccad23.
+
+ Revert "DIGEST: Documentation"
+ This reverts commit 3ec28966c3e4c63704212778f96c517cbf2e0090.
+
+ Revert "DIGEST: NEWS"
+ This reverts commit 099bf2927d446424e8585a60cf4ce63209999aa2.
+
+ Revert "DIGEST: LICENSING"
+ This reverts commit 5c8a0c6654fb55926985edf3b360b62d4f20691d.
+
+2023-03-10 Jan Beulich <jbeulich@suse.com>
+
+ Arm64/gas: drop redundant feature prereqs
+ Logic exists to deal with prereqs or prereqs, and in many cases
+ transitive prereqs are already not spelled out explicitly. Drop further
+ ones:
+ - FP is already a prereq to F16,
+ - SIMD and F16 are already prereqs to COMPNUM, and
+ - SVE2 and BFLOAT16 are already prereqs to SME.
+
+ Arm64/gas: add missing prereq features
+ A number of newer features are really SIMD or FP extensions, but don't
+ have this properly specified.
+
+ x86: decouple broadcast type and bytes fields
+ Keep both representing exclusively what was parsed from input, to avoid
+ the need for (potentially bogus) calculations when processing .insn.
+
+ x86-64: adjust REX-prefix part of SSE2AVX test
+ Before altering how build_modrm_byte() works, arrange for this part of
+ the testcase to actually use distinguishable source and destination
+ register numbers, such that incorrect propagation of, in particular, the
+ high bit encodings (from REX to VEX) can be noticed (in turn
+ specifically assertions [not] triggering in the respective code).
+
+2023-03-10 Jan Beulich <jbeulich@suse.com>
+
+ x86: move more disp processing out of md_assemble()
+ Put it in optimize_disp() such that it can then be re-used by .insn
+ handling. The movement makes it necessary (or at least very desirable,
+ to avoid introducing a fragile cast) to convert to local variable to
+ "unsigned", which in turn requires an adjustment to the pre-existing
+ loop header.
+
+ Having the caller pass in the specific template under consideration has
+ another benefit then: We can replace the two uses of current_templates
+ in the function as well, thus no longer looking at some merely "related"
+ template. (This may allow further tightening, but if so that's to be the
+ subject of another change.)
+
+2023-03-10 Jan Beulich <jbeulich@suse.com>
+
+ x86: use set_rex_vrex() also for short-form handling
+ This is benign for all existing insns, but is going to be needed for
+ handling of .insn operands. The earlier use requires moving up the
+ function, to avoid the need for a forward declaration.
+
+2023-03-10 Alan Modra <amodra@gmail.com>
+
+ eh static data
+ Fix another case of oss-fuzz tripping over gas static state,
+ ie. starting over testing another input file with rubbish left
+ uncleared in bss. size_end_sym pointed at garbage.
+
+ * ehopt.c (get_cie_info): Delete forward declaration.
+ (struct frame_data): Move to file scope.
+ (frame): New static, packaged..
+ (check_eh_frame): ..eh_frame_data and debug_frame_data.
+ (eh_begin): New function.
+ * as.c (gas_init): Call eh_begin.
+ * as.h (eh_begin): Declare.
+
+2023-03-10 GDB Administrator <gdbadmin@sourceware.org>
+
+ Automatic date update in version.in
+
+2023-03-09 Simon Marchi <simon.marchi@efficios.com>
+
+ gdb, gdbserver, gdbsupport: fix whitespace issues
+ Replace spaces with tabs in a bunch of places.
+
+ Change-Id: If0f87180f1d13028dc178e5a8af7882a067868b0
+
+2023-03-09 Tom de Vries <tdevries@suse.de>
+
+ [gdb/testsuite] Fix gdb.threads/pending-fork-event-detach.exp for remote target
+ Fix test-case gdb.threads/pending-fork-event-detach.exp for target board
+ remote-gdbserver-on-localhost using gdb_remote_download for $touch_file_bin.
+
+ Then, fix the test-case for target board remote-stdio-gdbserver with
+ REMOTE_TMPDIR=~/tmp.remote-stdio-gdbserver by creating $touch_file_path
+ on target using remote_download, and using the resulting path.
+
+ Tested on x86_64-linux.
+
+2023-03-09 Alan Modra <amodra@gmail.com>
+
+ objdump: report no section contents
+ objdump's read_section is never used for bss-style sections, so to
+ plug a hole that fuzzers have found, exclude sections without
+ SEC_HAS_CONTENTS.
+
+ * objdump.c (read_section): Report and return an error on
+ a no contents section.
+
+2023-03-09 Alan Modra <amodra@gmail.com>
+
+ gas: allow frag address wrapping in absolute section
+ This:
+ .struct -1
+ x:
+ .fill 1
+ y:
+ results in an internal error in frag_new due to abs_section_offset
+ wrapping from -1 to 0. Frags in the absolute section don't do much so
+ I think we can allow the address wrap.
+
+ * frags.c (frag_new): Allow address wrap in absolute section.
+
+2023-03-09 Tom de Vries <tdevries@suse.de>
+
+ [gdb/testsuite] Fix gdb.threads/multiple-successive-infcall.exp on native-gdbserver
+ With test-case gdb.threads/multiple-successive-infcall.exp and target board
+ native-gdbserver I run into:
+ ...
+ (gdb) continue^M
+ Continuing.^M
+ [New Thread 758.759]^M
+ ^M
+ Thread 1 "multiple-succes" hit Breakpoint 2, main () at \
+ multiple-successive-infcall.c:97^M
+ 97 thread_ids[tid] = tid + 2; /* prethreadcreationmarker */^M
+ (gdb) FAIL: gdb.threads/multiple-successive-infcall.exp: thread=5: \
+ created new thread
+ ...
+
+ The problem is that the new thread message doesn't match the regexp, which
+ expects something like this instead:
+ ...
+ [New Thread 0x7ffff746e700 (LWP 570)]^M
+ ...
+
+ Fix this by accepting this form of new thread message.
+
+ Tested on x86_64-linux.
+
+2023-03-09 Tom de Vries <tdevries@suse.de>
+
+ [gdb/testsuite] Fix gdb.threads/thread-specific-bp.exp on native-gdbserver
+ With test-case gdb.threads/thread-specific-bp.exp and target board
+ native-gdbserver I run into:
+ ...
+ (gdb) PASS: gdb.threads/thread-specific-bp.exp: non_stop=off: thread 1 selected
+ continue^M
+ Continuing.^M
+ Thread-specific breakpoint 3 deleted - thread 2 no longer in the thread list.^M
+ ^M
+ Thread 1 "thread-specific" hit Breakpoint 4, end () at \
+ thread-specific-bp.c:29^M
+ 29 }^M
+ (gdb) FAIL: gdb.threads/thread-specific-bp.exp: non_stop=off: \
+ continue to end (timeout)
+ ...
+
+ The problem is that the test-case tries to match the "[Thread ... exited]"
+ message which we do see with native testing:
+ ...
+ Continuing.^M
+ [Thread 0x7ffff746e700 (LWP 7047) exited]^M
+ Thread-specific breakpoint 3 deleted - thread 2 no longer in the thread list.^M
+ ...
+
+ The fact that the message is missing was reported as PR remote/30129.
+
+ We could add a KFAIL for this, but the functionality the test-case is trying
+ to test has nothing to do with the message, so it should pass. I only added
+ matching of the message in commit 2e5843d87c4 ("[gdb/testsuite] Fix
+ gdb.threads/thread-specific-bp.exp") to handle a race, not realizing doing so
+ broke testing on native-gdbserver.
+
+ Fix this by matching the "Thread-specific breakpoint $decimal deleted" message
+ instead.
+
+ Tested on x86_64-linux.
+
+2023-03-09 Tom de Vries <tdevries@suse.de>
+
+ [gdb/testsuite] Fix gdb.server/*.exp for remote target
+ Fix test-cases for target board remote-gdbserver-on-localhost by using
+ gdb_remote_download.
+
+ Tested on x86_64-linux.
+
+2023-03-09 Tom de Vries <tdevries@suse.de>
+
+ [gdb/testsuite] Fix gdb.server/unittest.exp for remote target
+ With test-case gdb.server/unittest.exp and a build with --disable-unit-tests I
+ get:
+ ...
+ (gdb) builtin_spawn /data/vries/gdb/leap-15-4/build/gdbserver/gdbserver \
+ --selftest^M
+ Selftests have been disabled for this build.^M
+ UNSUPPORTED: gdb.server/unittest.exp: unit tests
+ ...
+ but with target board remote-stdio-gdbserver I get instead:
+ ...
+ (gdb) builtin_spawn /usr/bin/ssh -t -l vries localhost \
+ /data/vries/gdb/leap-15-4/build/gdbserver/gdbserver --selftest^M
+ Selftests have been disabled for this build.^M
+ Connection to localhost closed.^M^M
+ FAIL: gdb.server/unittest.exp: unit tests
+ ...
+
+ Fix this by making the regexp less strict.
+
+ Tested on x86_64-linux.
+
+2023-03-09 Tom de Vries <tdevries@suse.de>
+
+ [gdb/testsuite] Fix gdbserver path in remote-stdio-gdbserver.exp
+ With test-case gdb.server/unittest.exp and target board remote-stdio-gdbserver
+ I run into:
+ ...
+ (gdb) builtin_spawn /usr/bin/ssh -t -l vries localhost /usr/bin/gdbserver \
+ --selftest^M
+ Selftests have been disabled for this build.^M
+ UNSUPPORTED: gdb.server/unittest.exp: unit tests
+ ...
+ due to using the system gdbserver /usr/bin/gdbserver rather than the one from
+ the build.
+
+ Fix this by removing the hard-coding of /usr/bin/gdbserver in
+ remote-stdio-gdbserver, allowing find_gdbserver to do its work, such that we
+ have instead:
+ ...
+ (gdb) builtin_spawn /usr/bin/ssh -t -l vries localhost \
+ /data/vries/gdb/leap-15-4/build/gdbserver/gdbserver --selftest^M
+ Running selftest remote_memory_tagging.^M
+ Ran 1 unit tests, 0 failed^M
+ Connection to localhost closed.^M^M
+ PASS: gdb.server/unittest.exp: unit tests
+ ...
+
+ Tested on x86_64-linux.
+
+2023-03-09 Tom de Vries <tdevries@suse.de>
+
+ [gdb/testsuite] Fix gdb.server/sysroot.exp for remote target
+ Fix test-case gdb.server/sysroot.exp with target board
+ remote-gdbserver-on-localhost, by:
+ - using gdb_remote_download, and
+ - disabling the "local" scenario for remote host.
+
+ Tested on x86_64-linux.
+
+2023-03-09 Tom de Vries <tdevries@suse.de>
+
+ [gdb/testsuite] Fix gdb.server/multi-ui-errors.exp for remote target
+ Test-case gdb.server/multi-ui-errors.exp fails for target board
+ remote-gdbserver-on-localhost with REMOTE_TARGET_USERNAME=remote-target:
+ ...
+ (gdb) PASS: gdb.server/multi-ui-errors.exp: interact with GDB's main UI
+ Executing on target: kill -9 6447 (timeout = 300)
+ builtin_spawn [open ...]^M
+ XYZ1ZYX
+ sh: line 0: kill: (6447) - Operation not permitted
+ ...
+
+ The problem is that the kill command:
+ ...
+ remote_exec target "kill -9 $gdbserver_pid"
+ ...
+ intended to kill gdbserver instead tries to kill the ssh client session in
+ which the gdbserver runs, and fails because it's trying as the remote target
+ user (remote-target on localhost) to kill a pid owned by the the build user
+ ($USER on localhost).
+
+ Fix this by getting the gdbserver pid using the ppid trick from
+ server-kill.exp.
+
+ Likewise in gdb.server/server-kill-python.exp.
+
+ Tested on x86_64-linux.
+
+2023-03-09 Tom de Vries <tdevries@suse.de>
+
+ [gdb/testsuite] Fix gdb.server/server-kill.exp for remote target
+ In commit 80dc83fd0e7 ("gdb/remote: handle target dying just before a stepi")
+ an observation is made that test-case gdb.server/server-kill.exp claims to
+ kill gdbserver, but actually kills the inferior. Consequently, the commit
+ adds testing of killing gdbserver alongside.
+
+ The problem is that:
+ - the original observation is incorrect (possibly caused by misreading getppid
+ as getpid)
+ - consequently, the test-case doesn't test killing the inferior, instead it
+ tests killing gdbserver twice
+ - the method to get the gdbserver PID added in the commit doesn't work
+ for target board remote-gdbserver-on-localhost, it returns the
+ PID of the ssh client session instead.
+
+ Fixing the method for getting the inferior PID gives us fails, and there's no
+ evidence that killing the inferior ever worked.
+
+ So, fix this by reverting the commit and just killing gdbserver, using the
+ original method of getting the gdbserver PID which does work for target board
+ remote-gdbserver-on-localhost.
+
+ Tested on x86_64-linux.
+
+2023-03-09 Tom de Vries <tdevries@suse.de>
+
+ [gdb/testsuite] Fix gdb.server/connect-with-no-symbol-file.exp for remote target
+ Test-case gdb.server/connect-with-no-symbol-file.exp fails with target board
+ remote-gdbserver-on-localhost.
+
+ The problem is here:
+ ...
+ set target_exec [gdb_remote_download target $binfile.bak $binfile]
+ ...
+ A "gdb_remote_download target" copies from build to target. So $binfile is
+ assumed to be a target path, but it's actually a build path.
+
+ Fix this by:
+ - fist copying $binfile.bak to $binfile, and
+ - simply doing [gdb_remote_download target $binfile].
+
+ Then, $binfile.bak is created here:
+ ...
+ # Make sure we have the original symbol file in a safe place to copy from.
+ gdb_remote_download host $binfile $binfile.bak
+ ...
+ and since "gdb_remote_download host" copies from build to host, $binfile.bak
+ is assumed to be a host path, but it's actually a build path. This happens to
+ cause no problems in this configuration (because build == host), but it would
+ for a remote host configuration.
+
+ So let's fix this by making build rather than host the "safe place to copy
+ from".
+
+ Tested on x86_64-linux.
+
+2023-03-09 Alan Modra <amodra@gmail.com>
+
+ lddigest 32-bit support and gcc-4 compile errors
+ * ld.texi: Revert 2023-03-08 commit 9a534b9f8e3d.
+ * testsuite/ld-scripts/crc64-poly.d: Likewise.
+ * testsuite/ld-scripts/crc64-poly.t: Likewise.
+ * lddigest.c: Formatting.
+ (get_uint64_t): New function.
+ (lang_add_digest): Take etree_type* args. Replace "illegal" with
+ "invalid" in error message.
+ * lddigest.h (lang_add_digest): Update prototype.
+ * lddigest_tab.c (algorithms): Work around gcc-4 errors.
+ * ldgram.y (polynome): Adjust lang_add_digest call.
+ * testsuite/ld-scripts/crc64-poly-size.d: Update expected error.
+
+2023-03-09 GDB Administrator <gdbadmin@sourceware.org>
+
+ Automatic date update in version.in
+
+2023-03-08 Tom Tromey <tom@tromey.com>
+
+ Remove OBJF_REORDERED
+ OBJF_REORDERED is set for nearly every object format. And, despite
+ the ominous warnings here and there, it does not seem very expensive.
+ This patch removes the flag entirely.
+
+ Reviewed-By: Andrew Burgess <aburgess@redhat.com>
+
+2023-03-08 Carl Love <cel@us.ibm.com>
+
+ PowerPC, fix test gdb.arch/altivec-regs.exp
+ The test fails on Power 10 with the RHEL9 distro. It also fails on
+ Power 9.
+
+ The test set a the breakpoint in main that stops at line:
+ a = 9; /* start here */. The test then sets a break point at the same
+ line where it wants to start the test and does a continue. GDB does not
+ stop again on the same line where it is stopped, but rather continues to
+ the end of the program.
+
+ Initialize variable A to zero so the break on main will stop before setting
+ a break point on line a = 9; /* start here */.
+
+ Make the match on the breakpoint number generic.
+
+ Patch has been tested on Power 10 with RHEL 9, Power 10 with Ubuntu 22.04,
+ and Power 9 with Fedora 36 with no regression failures.
+
+2023-03-08 Nick Clifton <nickc@redhat.com>
+
+ ld: Use correct types for crc64 calculations
+
+2023-03-08 Alan Modra <amodra@gmail.com>
+
+ Tidy pe_ILF_build_a_bfd a little
+ * peicode.h (ILF section, pe_ILF_object_p): Correct comments
+ and update the reference to Microsoft's docs.
+ (pe_ILF_build_a_bfd): Move all symbol creation before flipping
+ the bfd over to in-memory.
+
+ Re: DIGEST: testsuite
+ Correct test target/skip lines to fix fails on alpha-dec-vms,
+ alpha-linux-gnuecoff, i386-bsd, i386-msdos, ns32k-openbsd,
+ ns32k-pc532-mach, pdp11-dec-aout, rs6000-aix*, tic4x-coff, and
+ tic54x-coff.
+
+ Regen potfiles
+
+2023-03-08 Alan Modra <amodra@gmail.com>
+
+ Re: Move nm.c cached line number info to bfd usrdata
+ Commit e3f450f3933d resulted in a nm -l segfault on object files
+ without undefined symbols. Fix that, and be paranoid about bfd
+ section count changing.
+
+ * nm.c (struct lineno_cache): Add seccount.
+ (free_lineno_cache): Don't segfault on NULL lc->relocs.
+ (print_symbol): Stash section count when creating arrays.
+
+2023-03-08 Alan Modra <amodra@gmail.com>
+
+ z8 and z80 coff_reloc16_extra_cases sanity checks
+ * reloc16.c (bfd_coff_reloc16_get_relocated_section_contents):
+ Use size_t variables. Sanity check reloc address. Handle
+ errors from bfd_coff_reloc16_extra_cases.
+ * coffcode.h (_bfd_coff_reloc16_extra_cases): Return bool, take
+ size_t* args.
+ (dummy_reloc16_extra_cases): Adjust to suit. Don't abort.
+ * coff-z80.c (extra_case): Sanity check reloc address. Return
+ errors. Tidy formatting. Use bfd_signed_vma temp var to
+ check for reloc overflow. Don't abort on unexpected reloc type,
+ instead print an error and return false.
+ * coff-z8k.c (extra_case): Likewise.
+ * libcoff.h: Regenerate.
+
+2023-03-08 GDB Administrator <gdbadmin@sourceware.org>
+
+ Automatic date update in version.in
+
+2023-03-07 Simon Marchi <simon.marchi@polymtl.ca>
+
+ gdb/amdgpu: provide dummy implementation of gdbarch_return_value_as_value
+ The AMD GPU support has been merged shortly after commit 4e1d2f5814b2
+ ("Add new overload of gdbarch_return_value"), which made it mandatory
+ for architectures to provide either a return_value or
+ return_value_as_value implementation. Because of my failure to test
+ properly after rebasing and before pushing, we get this with the current
+ master:
+
+ $ gdb ./gdb -nx --data-directory=data-directory -q -ex "set arch amdgcn:gfx1010" -batch
+ /home/simark/src/binutils-gdb/gdb/gdbarch.c:517: internal-error: verify_gdbarch: the following are invalid ...
+ return_value_as_value
+
+ I started trying to change GDB to not force architectures to provide a
+ return_value or return_value_as_value implementation, but Andrew pointed
+ out that any serious port will have an implementation one day or
+ another, and it's easy to add a dummy implementation in the mean time.
+ So it's better to not complicate the core of GDB to know how to deal
+ with this.
+
+ There is an implementation of return_value in the downstream ROCgdb port
+ (which we'll need to convert to the new return_value_as_value), which
+ we'll contribute soon-ish. In the mean time, add a dummy implementation
+ of return_value_as_value to avoid the failed assertion.
+
+ Change-Id: I26edf441b511170aa64068fd248ab6201158bb63
+ Reviewed-By: Lancelot SIX <lancelot.six@amd.com>
+
+2023-03-07 Tom Tromey <tom@tromey.com>
+
+ Merge forget_cached_source_info_for_objfile into objfile method
+ forget_cached_source_info_for_objfile does some objfile-specific work
+ and then calls objfile::forget_cached_source_info. It seems better to
+ me to just have the method do all the work.
+
+2023-03-07 Tom Tromey <tom@tromey.com>
+
+ Clean up attribute reprocessing
+ I ran across the attribute reprocessing code recently and noticed that
+ it unconditionally sets members of the CU when reading a DIE. Also,
+ each spot reading attributes needs to be careful to "reprocess" them
+ as a separate step.
+
+ This seemed excessive to me, because while reprocessing applies to any
+ DIE, setting the CU members is only necessary for the toplevel DIE in
+ any given CU.
+
+ This patch introduces a new read_toplevel_die function and changes a
+ few spots to call it. This is easily done because reading the
+ toplevel DIE is already special.
+
+ I left the reprocessing flag and associated checks in attribute. It
+ could be stripped out, but I am not sure it would provide much value
+ (maybe some iota of performance).
+
+ Regression tested on x86-64 Fedora 36.
+
+2023-03-07 Simon Marchi <simon.marchi@polymtl.ca>
+
+ gdb: initialize interp::next
+ This field is never initialized, it seems to me like it would be a good
+ idea to initialize it to nullptr to avoid bad surprises.
+
+ Change-Id: I8c04319d564f5d385d8bf0acee758f6ce28b4447
+ Reviewed-By: Tom Tromey <tom@tromey.com>
+
+2023-03-07 Simon Marchi <simon.marchi@polymtl.ca>
+
+ gdb: make interp::m_name an `const char *`
+ I realized that the memory for interp names does not need to be
+ allocated. The name used to register interp factory functions is always
+ a literal string, so has static storage duration. If we change
+ interp_lookup to pass that name instead of the string that it receives
+ as a parameter (which does not always have static storage duration),
+ then interps can simply store pointers to the name.
+
+ So, change interp_lookup to pass `factory.name` rather than `name`.
+ Change interp::m_name to be a `const char *` rather than an std::string.
+
+ Change-Id: I0474d1f7b3512e7d172ccd73018aea927def3188
+ Reviewed-By: Tom Tromey <tom@tromey.com>
+
+2023-03-07 Simon Marchi <simon.marchi@efficios.com>
+
+ gdb: make get_interp_info return a reference
+ get_interp_info and get_current_interp_info always return non-nullptr,
+ so they can return a reference instead of a pointer.
+
+ Since we don't need to copy it, make ui_interp_info non-copyiable, to
+ avoid a copying it in a local variable, instead of getting a reference.
+
+ Change-Id: I6d8dea92dc26a58ea340d04862db6b8d9cf906a0
+ Reviewed-By: Tom Tromey <tom@tromey.com>
+
+2023-03-07 Tom Tromey <tromey@adacore.com>
+
+ Fix selfcheck regression due to new maint command
+ Simon points out that the new maint command, intended to fix a
+ regression, also introduces a new regression in "maint selftest".
+
+ This patch fixes the error. I did a full regression test on x86-64
+ Fedora 36.
+
+2023-03-07 Vladimir Mezentsev <vladimir.mezentsev@oracle.com>
+
+ gprofng: read Dwarf 5
+ gprofng reads Dwarf to find function names, sources, and line numbers.
+ gprofng skips other debug information.
+ I fixed three places in gprofng Dwarf reader:
+ - parsing the compilation unit header.
+ - parsing the line number table header.
+ - parsing new DW_FORMs.
+
+ Tested on aarch64-linux/x86_64-linux.
+
+ gprofng/ChangeLog
+ 2023-03-05 Vladimir Mezentsev <vladimir.mezentsev@oracle.com>
+
+ PR gprofng/30195
+ gprofng/src/Dwarf.cc: Support Dwarf-5.
+ gprofng/src/DwarfLib.cc: Likewise.
+ gprofng/src/Dwarf.h: Likewise.
+ gprofng/src/DwarfLib.h: Likewise.
+ gprofng/src/collctrl.cc: Don't read freed memory.
+
+2023-03-07 Richard Purdie <richard.purdie@linuxfoundation.org>
+
+ gdb: Fix GDB_AC_CHECK_BFD macro regression
+ Commit 5218fa9e8937b007d554f1e01c2e4ecdb9b7e271, "gdb: use libtool in
+ GDB_AC_CHECK_BFD" dropped passing in existing LDFLAGS. In our environment,
+ this caused the configure check "checking for ELF support in BFD" to stop
+ working causing build failures as we need our LDFLAGS to be used for
+ correct linking.
+
+ That change also meant the code failed to match the comments. Add back the
+ missing LDFLAGS preservation, fix our builds and match the comment.
+
+ Change-Id: Ie91509116fab29f95b9db1ff0b6ddc280d460112
+ Approved-By: Simon Marchi <simon.marchi@efficios.com>
+ Reviewed-By: Jose E. Marchesi <jose.marchesi@oracle.com>
+
+2023-03-07 Aditya Vidyadhar Kamath <Aditya.Kamath1@ibm.com>
+
+ Enable vector instruction debugging for AIX
+ AIX now supports vector register contents debugging for both VMX
+ VSX registers.
+
+2023-03-07 Tom de Vries <tdevries@suse.de>
+
+ [gdb/testsuite] Fix gdb.threads/execl.exp for remote target
+ Fix test-case gdb.threads/execl.exp on target board
+ remote-gdbserver-on-localhost using gdb_remote_download.
+
+ Tested on x86_64-linux.
+
+2023-03-07 Tom Tromey <tromey@adacore.com>
+
+ Ensure index cache entry written in test
+ Now that index cache files are written in the background, one test in
+ index-cache.exp is racy -- it assumes that the cache file will have
+ been written during startup.
+
+ This patch fixes the problem by introducing a new maintenance command
+ to wait for all pending writes to the index cache.
+
+ Approved-By: Simon Marchi <simon.marchi@efficios.com>
+ Reviewed-By: Eli Zaretskii <eliz@gnu.org>
+
+2023-03-07 Tom de Vries <tdevries@suse.de>
+
+ [gdb/testsuite] Fix gdb.base/skip-solib.exp for remote target
+ Fix test-case gdb.base/skip-solib.exp for target board
+ remote-gdbserver-on-localhost using gdb_load_shlib.
+
+ Tested on x86_64-linux.
+
+2023-03-07 Tom de Vries <tdevries@suse.de>
+
+ [gdb/testsuite] Use shlib gdb_compile option in gdb.base/skip-solib.exp
+ In test-case gdb.base/skip-solib.exp the linking against a shared library is
+ done manually:
+ ...
+ if {[gdb_compile "${binfile_main}.o" "${binfile_main}" executable \
+ [list debug "additional_flags=-L$testobjdir" \
+ "additional_flags=-l${test}" \
+ "ldflags=-Wl,-rpath=$testobjdir"]] != ""} {
+ ...
+
+ Instead, use the shlib gdb_compile option such that we simply have:
+ ...
+ [list debug shlib=$binfile_lib]] != ""} {
+ ...
+
+ Tested on x86_64-linux.
+
+2023-03-07 Tom de Vries <tdevries@suse.de>
+
+ [gdb/testsuite] Fix gdb.base/fork-no-detach-follow-child-dlopen.exp for remote target
+ Fix test-case gdb.base/fork-no-detach-follow-child-dlopen.exp for target board
+ remote-gdbserver-on-localhost.exp by using gdb_download_shlib and gdb_locate_shlib.
+
+ Tested on x86_64-linux.
+
+2023-03-07 Tom de Vries <tdevries@suse.de>
+
+ [gdb/testsuite] Fix gdb.base/break-probes.exp for remote target
+ With test-case gdb.base/break-probes.exp and target board
+ remote-gdbserver-on-localhost (using REMOTE_TARGET_USERNAME) we run into some
+ failures.
+
+ Fix these by adding the missing gdb_download_shlib and gdb_locate_shlib.
+
+ Tested on x86_64-linux.
+
+2023-03-07 Tom de Vries <tdevries@suse.de>
+
+ [gdb/testsuite] Fix gdb.dwarf2/dw2-zero-range.exp for remote-gdbserver-on-localhost
+ Fix test-case gdb.dwarf2/dw2-zero-range.exp for target board
+ remote-gdbserver-on-localhost using gdb_load_shlib.
+
+ Tested on x86_64-linux.
+
+2023-03-07 Ulf Samuelsson <ulf@emagii.com>
+
+ Build ldint
+
+2023-03-07 Ulf Samuelsson <ulf@emagii.com>
+
+ DIGEST: Makefile.*
+ The Makefile.in was generated using automake
+ after adding a few files.
+
+ When adding the ldreflect.* files, the autotools
+ versions were wrong.
+ After upgrading the host OS, autotools were upgraded to 2.71
+ reinstalling the desired 2.69 still generates a lot of changes.
+
+ Makefile.ini has therefore been manually edited.
+
+2023-03-07 Ulf Samuelsson <ulf@emagii.com>
+
+ DIGEST: calculation
+
+ DIGEST: ldlang.*: add timestamp
+
+ DIGEST: ldmain.c
+
+ DIGEST: ldgram.y
+
+ DIGEST: ldlex.l
+
+ DIGEST: testsuite
+
+ DIGEST: Documentation
+
+ DIGEST: NEWS
+
+ DIGEST: LICENSING
+
+2023-03-07 Tom de Vries <tdevries@suse.de>
+
+ [gdb/testsuite] Fix gdb.base/signals-state-child.exp for remote-gdbserver-on-localhost
+ With test-case gdb.base/signals-state-child.exp on target board
+ remote-gdbserver-on-localhost I run into:
+ ...
+ builtin_spawn /usr/bin/ssh -t -l remote-target localhost \
+ $outputs/gdb.base/signals-state-child/signals-state-child-standalone^M
+ bash: $outputs/gdb.base/signals-state-child/signals-state-child-standalone: \
+ Permission denied^M
+ Connection to localhost closed.^M^M
+ FAIL: gdb.base/signals-state-child.exp: collect standalone signals state
+ ...
+
+ The problem is that we're trying to run an executable on the target board using
+ a host path.
+
+ After fixing this by downloading the exec to the target board, we run into:
+ ...
+ builtin_spawn /usr/bin/ssh -t -l remote-target localhost \
+ signals-state-child-standalone^M
+ bash: signals-state-child-standalone: command not found^M
+ Connection to localhost closed.^M^M
+ FAIL: gdb.base/signals-state-child.exp: collect standalone signals state
+ ...
+
+ Fix this by using an absolute path name for the exec on the target board.
+
+ The dejagnu proc standard_file does not support op == "absolute" for target
+ boards, so add an implementation in remote-gdbserver-on-localhost.exp.
+
+ Also:
+ - fix a PATH-in-test-name issue
+ - cleanup gdb.txt and standalone.txt on target board
+
+ Tested on x86_64-linux.
+
+2023-03-07 Tom de Vries <tdevries@suse.de>
+
+ [gdb/testsuite] Fix gdb.cp/breakpoint-shlib-func.exp with remote-gdbserver-on-localhost
+ Test-case gdb.cp/breakpoint-shlib-func.exp fails with target board
+ remote-gdbserver-on-localhost.
+
+ Fix this by adding the missing gdb_load_shlib.
+
+ Tested on x86_64-linux.
+
+2023-03-07 Aditya Vidyadhar Kamath <Aditya.Kamath1@ibm.com>
+
+ Modify altivec-regs.exp testcase for AIX
+ On AIX, the debugger cannot access vector registers before they
+ are first used by the inferior. Hence we change the test case
+ such that some vector registers are accessed by the variable 'x' in AIX
+ and other targets are not affected as a consequence of the same.
+
+2023-03-07 Tom de Vries <tdevries@suse.de>
+
+ [gdb/testsuite] Fix gdb.mi/*.exp with remote-gdbserver-on-localhost
+ When running test-cases gdb.mi/*.exp with target board
+ remote-gdbserver-on-localhost, we run into a few fails.
+
+ Fix these (and make things more similar to the gdb.exp procs) by:
+ - factoring out mi_load_shlib out of mi_load_shlibs
+ - making mi_load_shlib use gdb_download_shlib, like
+ gdb_load_shlib
+ - factoring out mi_locate_shlib out of mi_load_shlib
+ - making mi_locate_shlib check for mi_spawn_id, like
+ gdb_locate_shlib
+ - using gdb_download_shlib and mi_locate_shlib in the test-cases.
+
+ Tested on x86_64-linux, with and without target board
+ remote-gdbserver-on-localhost.
+
+2023-03-07 Simon Marchi <simon.marchi@efficios.com>
+
+ gdb: fix -Wsingle-bit-bitfield-constant-conversion warning in z80-tdep.c
+ When building with clang 16, I see:
+
+ /home/smarchi/src/binutils-gdb/gdb/z80-tdep.c:338:32: error: implicit truncation from 'int' to a one-bit wide bit-field changes value from 1 to -1 [-Werror,-Wsingle-bit-bitfield-constant-conversion]
+ info->prologue_type.load_args = 1;
+ ^ ~
+ /home/smarchi/src/binutils-gdb/gdb/z80-tdep.c:345:36: error: implicit truncation from 'int' to a one-bit wide bit-field changes value from 1 to -1 [-Werror,-Wsingle-bit-bitfield-constant-conversion]
+ info->prologue_type.critical = 1;
+ ^ ~
+ /home/smarchi/src/binutils-gdb/gdb/z80-tdep.c:351:37: error: implicit truncation from 'int' to a one-bit wide bit-field changes value from 1 to -1 [-Werror,-Wsingle-bit-bitfield-constant-conversion]
+ info->prologue_type.interrupt = 1;
+ ^ ~
+ /home/smarchi/src/binutils-gdb/gdb/z80-tdep.c:367:36: error: implicit truncation from 'int' to a one-bit wide bit-field changes value from 1 to -1 [-Werror,-Wsingle-bit-bitfield-constant-conversion]
+ info->prologue_type.fp_sdcc = 1;
+ ^ ~
+ /home/smarchi/src/binutils-gdb/gdb/z80-tdep.c:375:35: error: implicit truncation from 'int' to a one-bit wide bit-field changes value from 1 to -1 [-Werror,-Wsingle-bit-bitfield-constant-conversion]
+ info->prologue_type.fp_sdcc = 1;
+ ^ ~
+ /home/smarchi/src/binutils-gdb/gdb/z80-tdep.c:380:35: error: implicit truncation from 'int' to a one-bit wide bit-field changes value from 1 to -1 [-Werror,-Wsingle-bit-bitfield-constant-conversion]
+ info->prologue_type.fp_sdcc = 1;
+ ^ ~
+
+ Fix that by using "unsigned int" as the bitfield's underlying type.
+
+ Change-Id: I3550a0112f993865dc70b18f02ab11bb5012693d
+
+2023-03-07 Simon Marchi <simon.marchi@efficios.com>
+
+ gdbsupport: ignore -Wenum-constexpr-conversion in enum-flags.h
+ When building with clang 16, we get:
+
+ CXX gdb.o
+ In file included from /home/smarchi/src/binutils-gdb/gdb/gdb.c:19:
+ In file included from /home/smarchi/src/binutils-gdb/gdb/defs.h:65:
+ /home/smarchi/src/binutils-gdb/gdb/../gdbsupport/enum-flags.h:95:52: error: integer value -1 is outside the valid range of values [0, 15] for this enumeration type [-Wenum-constexpr-conversion]
+ integer_for_size<sizeof (T), static_cast<bool>(T (-1) < T (0))>::type
+ ^
+
+ The error message does not make it clear in the context of which enum
+ flag this fails (i.e. what is T in this context), but it doesn't really
+ matter, we have similar warning/errors for many of them, if we let the
+ build go through.
+
+ clang is right that the value -1 is invalid for the enum type we cast -1
+ to. However, we do need this expression in order to select an integer
+ type with the appropriate signedness. That is, with the same signedness
+ as the underlying type of the enum.
+
+ I first wondered if that was really needed, if we couldn't use
+ std::underlying_type for that. It turns out that the comment just above
+ says:
+
+ /* Note that std::underlying_type<enum_type> is not what we want here,
+ since that returns unsigned int even when the enum decays to signed
+ int. */
+
+ I was surprised, because std::is_signed<std::underlying_type<enum_type>>
+ returns the right thing. So I tried replacing all this with
+ std::underlying_type, see if that would work. Doing so causes some
+ build failures in unittests/enum-flags-selftests.c:
+
+ CXX unittests/enum-flags-selftests.o
+ /home/smarchi/src/binutils-gdb/gdb/unittests/enum-flags-selftests.c:254:1: error: static assertion failed due to requirement 'gdb::is_same<selftests::enum_flags_tests::check_valid_expr254::archetype<enum_flags<s
+ elftests::enum_flags_tests::RE>, selftests::enum_flags_tests::RE, enum_flags<selftests::enum_flags_tests::RE2>, selftests::enum_flags_tests::RE2, enum_flags<selftests::enum_flags_tests::URE>, selftests::enum_fla
+ gs_tests::URE, int>, selftests::enum_flags_tests::check_valid_expr254::archetype<enum_flags<selftests::enum_flags_tests::RE>, selftests::enum_flags_tests::RE, enum_flags<selftests::enum_flags_tests::RE2>, selfte
+ sts::enum_flags_tests::RE2, enum_flags<selftests::enum_flags_tests::URE>, selftests::enum_flags_tests::URE, unsigned int>>::value == true':
+ CHECK_VALID (true, int, true ? EF () : EF2 ())
+ ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+ /home/smarchi/src/binutils-gdb/gdb/unittests/enum-flags-selftests.c:91:3: note: expanded from macro 'CHECK_VALID'
+ CHECK_VALID_EXPR_6 (EF, RE, EF2, RE2, UEF, URE, VALID, EXPR_TYPE, EXPR)
+ ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+ /home/smarchi/src/binutils-gdb/gdb/../gdbsupport/valid-expr.h:105:3: note: expanded from macro 'CHECK_VALID_EXPR_6'
+ CHECK_VALID_EXPR_INT (ESC_PARENS (typename T1, typename T2, \
+ ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+ /home/smarchi/src/binutils-gdb/gdb/../gdbsupport/valid-expr.h:66:3: note: expanded from macro 'CHECK_VALID_EXPR_INT'
+ static_assert (gdb::is_detected_exact<archetype<TYPES, EXPR_TYPE>, \
+ ^ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+
+ This is a bit hard to decode, but basically enumerations have the
+ following funny property that they decay into a signed int, even if
+ their implicit underlying type is unsigned. This code:
+
+ enum A {};
+ enum B {};
+
+ int main() {
+ std::cout << std::is_signed<std::underlying_type<A>::type>::value
+ << std::endl;
+ std::cout << std::is_signed<std::underlying_type<B>::type>::value
+ << std::endl;
+ auto result = true ? A() : B();
+ std::cout << std::is_signed<decltype(result)>::value << std::endl;
+ }
+
+ produces:
+
+ 0
+ 0
+ 1
+
+ So, the "CHECK_VALID" above checks that this property works for enum flags the
+ same way as it would if you were using their underlying enum types. And
+ somehow, changing integer_for_size to use std::underlying_type breaks that.
+
+ Since the current code does what we want, and I don't see any way of doing it
+ differently, ignore -Wenum-constexpr-conversion around it.
+
+ Change-Id: Ibc82ae7bbdb812102ae3f1dd099fc859dc6f3cc2
+
+2023-03-07 John Baldwin <jhb@FreeBSD.org>
+
+ gdb.threads/next-bp-other-thread.c: Ensure child thread is started.
+ Use a pthread_barrier to ensure the child thread is started before
+ the main thread gets to the first breakpoint.
+
+ gdb.threads/execl.c: Ensure all threads are started before execl.
+ Use a pthread_barrier to ensure all threads are started before
+ proceeding to the breakpoint where info threads output is checked.
+
+2023-03-07 John Baldwin <jhb@FreeBSD.org>
+
+ gdb.base/catch-syscall.exp: Remove some Linux-only assumptions.
+ - Some OS's use a different syscall for exit(). For example, the
+ BSD's use SYS_exit rather than SYS_exit_group. Update the C source
+ file and the expect script to support SYS_exit as an alternative to
+ SYS_exit_group.
+
+ - The cross-arch syscall number tests are all Linux-specific with
+ hardcoded syscall numbers specific to Linux kernels. Skip these
+ tests on non-Linux systems. FreeBSD kernels for example use the
+ same system call numbers on all platforms, so the test is also not
+ relevant on FreeBSD.
+
+2023-03-07 John Baldwin <jhb@FreeBSD.org>
+
+ gdb.threads/multi-create: Double the existing stack size.
+ Setting the stack size to 2*PTHREAD_STACK_MIN actually lowered the
+ stack on FreeBSD rather than raising it causing non-main threads in
+ the test program to overflow their stack and crash. Double the
+ existing stack size rather than assuming that the initial stack size
+ is PTHREAD_STACK_MIN.
+
+2023-03-07 John Baldwin <jhb@FreeBSD.org>
+
+ amd64-linux-tdep: Don't treat fs_base and gs_base as system registers.
+ These registers can be changed directly in userspace, and similar
+ registers to support TLS on other architectures (tpidr* on ARM and
+ AArch64, tp on RISC-V) are treated as general purpose registers.
+
+ Reviewed-By: Tom Tromey <tom@tromey.com>
+
+2023-03-07 John Baldwin <jhb@FreeBSD.org>
+
+ gdb.arch/amd64-gs_base.exp: Support non-Linux.
+ The orig_rax pseudo-register is Linux-specific and isn't relevant to
+ this test. The fs_base and gs_base registers are also not treated as
+ system registers in other OS ABIs. This allows the test to pass on
+ FreeBSD.
+
+ Reviewed-By: Tom Tromey <tom@tromey.com>
+
+2023-03-07 GDB Administrator <gdbadmin@sourceware.org>
+
+ Automatic date update in version.in
+
+2023-03-06 Kévin Le Gouguec <legouguec@adacore.com>
+
+ gdb/python: Fix --disable-tui build
+ As of 2023-02-13 "gdb/python: deallocate tui window factories at Python
+ shut down" (9ae4519da90), a TUI-less build fails with:
+
+ $src/gdb/python/py-tui.c: In function ‘void gdbpy_finalize_tui()’:
+ $src/gdb/python/py-tui.c:621:3: error: ‘gdbpy_tui_window_maker’ has not been declared
+ 621 | gdbpy_tui_window_maker::invalidate_all ();
+ | ^~~~~~~~~~~~~~~~~~~~~~
+
+ Since gdbpy_tui_window_maker is only defined under #ifdef TUI, add an
+ #ifdef guard in gdbpy_finalize_tui as well.
+
+2023-03-06 Tom de Vries <tdevries@suse.de>
+
+ [gdb/testsuite] Move gdb.base/gdb-caching-proc.exp to gdb.testsuite
+ Test-case gdb.base/gdb-caching-proc.exp doesn't really test gdb, but it tests
+ the gdb_caching_procs in the testsuite, so it belongs in gdb.testsuite rather
+ than gdb.base.
+
+ Move test-case gdb.base/gdb-caching-proc.exp to gdb.testsuite, renaming it to
+ gdb.testsuite/gdb-caching-proc-consistency.exp to not clash with
+ recently added gdb.testsuite/gdb-caching-proc.exp.
+
+ Tested on x86_64-linux.
+
+ Reviewed-By: Tom Tromey <tom@tromey.com>
+
+2023-03-06 Tom de Vries <tdevries@suse.de>
+
+ [gdb/testsuite] Allow args in gdb_caching_proc
+ Test-case gdb.base/morestack.exp contains:
+ ...
+ require {have_compile_flag -fsplit-stack}
+ ...
+ and I want to cache the result of have_compile_flag.
+
+ Currently gdb_caching_proc doesn't allow args, so I could add:
+ ...
+ gdb_caching_proc have_compile_flag_fsplit_stack {
+ return [have_compile_flag -fsplit-stack]
+ }
+ ...
+ and then use that proc instead, but I find this cumbersome and
+ maintenance-unfriendly.
+
+ Instead, allow args in a gdb_caching_proc, such that I can simply do:
+ ...
+ -proc have_compile_flag { flag } {
+ +gdb_caching_proc have_compile_flag { flag } {
+ ...
+
+ Note that gdb_caching_procs with args do not work with the
+ gdb.base/gdb-caching-procs.exp test-case, so those procs are skipped.
+
+ Tested on x86_64-linux.
+
+ Reviewed-By: Tom Tromey <tom@tromey.com>
+
+2023-03-06 Tom de Vries <tdevries@suse.de>
+
+ [gdb/testsuite] Use regular proc syntax for gdb_caching_proc
+ A regular tcl proc with no args looks like:
+ ...
+ proc foo {} {
+ return 1
+ }
+ ...
+ but a gdb_caching_proc deviates from that syntax by dropping the explicit no
+ args bit:
+ ...
+ gdb_caching_proc foo {
+ return 1
+ }
+ ...
+
+ Make the gdb_caching_proc use the same syntax as regular procs, such that we
+ have instead:
+ ...
+ gdb_caching_proc foo {} {
+ return 1
+ }
+ ...
+
+ Tested on x86_64-linux.
+
+ Reviewed-By: Tom Tromey <tom@tromey.com>
+
+2023-03-06 Tom de Vries <tdevries@suse.de>
+
+ [gdb/testsuite] Add gdb.testsuite/gdb-caching-proc.exp
+ Add test-case gdb.testsuite/gdb-caching-proc.exp that excercises
+ gdb_caching_proc.
+
+ Tested on x86_64-linux.
+
+ Reviewed-By: Tom Tromey <tom@tromey.com>
+
+2023-03-06 Tom Tromey <tromey@adacore.com>
+
+ Fix DAP stackTrace through frames without debuginfo
+ The DAP stackTrace implementation did not fully account for frames
+ without debuginfo. Attemping this would yield a result like:
+
+ {"request_seq": 5, "type": "response", "command": "stackTrace", "success": false, "message": "'NoneType' object has no attribute 'filename'", "seq": 11}
+
+ This patch fixes the problem by adding another check for None.
+
+2023-03-06 Tom Tromey <tromey@adacore.com>
+
+ Remove exception_catchpoint::resources_needed
+ exception_catchpoint::resources_needed has a FIXME comment that I
+ think makes this method obsolete. Also, I note that similar
+ catchpoints, for example Ada catchpoints, don't have this method.
+ This patch removes the method. Regression tested on x86-64 Fedora 36.
+
+2023-03-06 Tom Tromey <tromey@adacore.com>
+
+ Remove two more files in gdb "distclean"
+ The recent work to have gdb link via libtool means that there are a
+ couple more generated files in the build directory that should be
+ removed by "distclean".
+
+ Note that gdb can't really fully implement distclean due to the desire
+ to put certain generated files into the distribution. Still, it can
+ get pretty close.
+
+2023-03-06 Alan Modra <amodra@gmail.com>
+
+ macho null dereference read
+ The main problem here was not returning -1 from canonicalize_symtab on
+ an error, leaving the vector of relocs only partly initialised and one
+ with a null sym_ptr_ptr.
+
+ * mach-o.c (bfd_mach_o_canonicalize_symtab): Return -1 on error,
+ not 0.
+ (bfd_mach_o_pre_canonicalize_one_reloc): Init sym_ptr_ptr to
+ undefined section sym.
+
+2023-03-06 Alan Modra <amodra@gmail.com>
+
+ PR30198, Assertion and segfault when linking x86_64 elf and coff
+ PR 30198
+ * coff-x86_64.c (coff_amd64_reloc): Set *error_message when
+ returning bfd_reloc_dangerous. Also check that __ImageBase is
+ defined before accessing h->u.def.
+
+ More _bfd_ecoff_locate_line sanity checks
+ * ecofflink.c (mk_fdrtab): Discard fdr with negative cpd.
+ (lookup_line): Sanity check fdr cbLineOffset and cbLine.
+ Sanity check pdr cbLineOffset.
+
+2023-03-06 Alan Modra <amodra@gmail.com>
+
+ Correct odd loop in ecoff lookup_line
+ I can't see why this really odd looking loop was written the way it
+ was in commit a877f5917f90, but it can result in a buffer overrun.
+
+ * ecofflink.c (lookup_line): Don't swap in pdr at pdr_end.
+
+2023-03-06 Alan Modra <amodra@gmail.com>
+
+ Downgrade objdump fatal errors to non-fatal
+ * objdump.c (slurp_symtab): Replace bfd_fatal calls with calls
+ to my_bfd_nonfatal.
+ (slurp_dynamic_symtab, disassemble_section): Likewise.
+ (disassemble_data): Replace fatal call with non_fatal call, and
+ set exit_status. Don't error on non-existent dynamic relocs.
+ Don't call bfd_fatal on bfd_canonicalize_dynamic_reloc error.
+ (dump_ctf, dump_section_sframe): Replace bfd_fatal calls with
+ calls to my_bfd_nonfatal and clean up memory.
+ (dump_relocs_in_section): Don't call bfd_fatal on errors.
+ (dump_dynamic_relocs): Likewise.
+ (display_any_bfd): Make archive nesting too depp non_fatal.
+
+ Downgrade addr2line fatal errors to non-fatal
+ * addr2line.c (slurp_symtab): Don't exit on errors.
+ (process_file): Likewise.
+
+2023-03-06 Alan Modra <amodra@gmail.com>
+
+ Downgrade nm fatal errors to non-fatal
+ Many of the fatal errors in nm ought to be recoverable. This patch
+ downgrades most of them. The ones that are left are most likely due
+ to memory allocation failures.
+
+ * nm.c (print_symdef_entry): Don't bomb with a fatal error
+ on a corrupted archive symbol table.
+ (filter_symbols): Silently omit symbols that return NULL
+ from bfd_minisymbol_to_symbol rather than giving a fatal
+ error.
+ (display_rel_file): Don't give a fatal error on
+ bfd_read_minisymbols returning an error, or on not being able
+ to read dynamic symbols for synth syms.
+ (display_archive): Downgrade bfd_openr_next_archived_file
+ error.
+ (display_file): Don't bomb on a bfd_close failure.
+
+2023-03-06 Alan Modra <amodra@gmail.com>
+
+ Move nm.c cached line number info to bfd usrdata
+ Replace the static variables used by nm to cache line number info
+ with a struct attached to the bfd. Cleaner, and it avoids any concern
+ that lineno_cache_bfd is somehow left pointing at memory for a closed
+ bfd and that memory is later reused for another bfd, not that I think
+ this is possible. Also don't bomb via bfd_fatal on errors getting
+ the line number info, just omit the line numbers.
+
+ * nm.c (struct lineno_cache): Rename from get_relocs_info.
+ Add symcount.
+ (lineno_cache_bfd, lineno_cache_rel_bfd): Delete.
+ (get_relocs): Adjust for struct rename. Don't call bfd_fatal
+ on errors.
+ (free_lineno_cache): New function.
+ (print_symbol): Use lineno_cache in place of statics. Don't
+ call bfd_fatal on errors reading symbols, just omit the line
+ info.
+ (display_archive, display_file): Call free_lineno_cache.
+
+2023-03-06 Alan Modra <amodra@gmail.com>
+
+ Correct objdump command line error handling
+ bfd_nonfatal is used when a bfd error is to be printed. That's not
+ the case for command line errors.
+
+ * objdump.c (nonfatal): Rename to my_bfd_nonfatal.
+ (main): Use non_fatal and call usage on unrecognized arg errors.
+ Don't set exit_status when calling usage.
+
+2023-03-06 GDB Administrator <gdbadmin@sourceware.org>
+
+ Automatic date update in version.in
+
+2023-03-05 GDB Administrator <gdbadmin@sourceware.org>
+
+ Automatic date update in version.in
+
+2023-03-04 GDB Administrator <gdbadmin@sourceware.org>
+
+ Automatic date update in version.in
+
+2023-03-03 Simon Marchi <simon.marchi@efficios.com>
+
+ gdb/testsuite: use `kill -FOO` instead of `kill -SIGFOO`
+ When running gdb.base/bg-exec-sigint-bp-cond.exp when SHELL is dash,
+ rather than bash, I get:
+
+ c&^M
+ Continuing.^M
+ (gdb) sh: 1: kill: Illegal option -S^M
+ ^M
+ Breakpoint 2, foo () at /home/jenkins/smarchi/binutils-gdb/build/gdb/testsuite/../../../gdb/testsuite/gdb.base/bg-exec-sigint-bp-cond.c:23^M
+ 23 return 0;^M
+ FAIL: gdb.base/bg-exec-sigint-bp-cond.exp: no force memory write: SIGINT does not interrupt background execution (timeout)
+
+ This is because it uses the kill command built-in the dash shell, and
+ using the SIG prefix with kill does not work with dash's kill. The
+ difference is listed in the documentation for bash's POSIX-correct mode
+ [1]:
+
+ The kill builtin does not accept signal names with a ‘SIG’ prefix.
+
+ Replace SIGINT with INT in that test.
+
+ By grepping, I found two other instances (gdb.base/sigwinch-notty.exp
+ and gdb.threads/detach-step-over.exp). Those were not problematic on my
+ system though. Since they are done through remote_exec, they don't go
+ through the shell and therefore invoke /bin/kill. On my Arch Linux,
+ it's:
+
+ $ /bin/kill --version
+ kill from util-linux 2.38.1 (with: sigqueue, pidfd)
+
+ and on my Ubuntu:
+
+ $ /bin/kill --version
+ kill from procps-ng 3.3.17
+
+ These two implementations accept "-SIGINT". But according to the POSIX
+ spec [2], the kill utility should recognize the signal name without the
+ SIG prefix (if it recognizes them with the SIG prefix, it's an
+ extension):
+
+ -s signal_name
+ Specify the signal to send, using one of the symbolic names defined
+ in the <signal.h> header. Values of signal_name shall be recognized
+ in a case-independent fashion, without the SIG prefix. In addition,
+ the symbolic name 0 shall be recognized, representing the signal
+ value zero. The corresponding signal shall be sent instead of SIGTERM.
+ -signal_name
+ [XSI] [Option Start]
+ Equivalent to -s signal_name. [Option End]
+
+ So, just in case some /bin/kill implementation happens to not recognize
+ the SIG prefixes, change these two other calls to remove the SIG
+ prefix.
+
+ [1] https://www.gnu.org/software/bash/manual/html_node/Bash-POSIX-Mode.html
+ [2] https://pubs.opengroup.org/onlinepubs/9699919799/utilities/kill.html
+
+ Change-Id: I81ccedd6c9428ab63b9261813f1905a18941f8da
+ Reviewed-By: Tom Tromey <tom@tromey.com>
+
+2023-03-03 Tom de Vries <tdevries@suse.de>
+
+ [gdb/testsuite] Use set always-read-ctf on instead of --strip-debug
+ Use "set always-read-ctf on" instead of --strip-debug in the ctf test-cases.
+
+ Tested on x86_64-linux.
+
+2023-03-03 Tom Tromey <tromey@adacore.com>
+
+ Update expected results in long_long.exp
+ Simon pointed out that the recent patch to add half-float support to
+ 'x/f' caused a couple of regressions in long_long.exp. This patch
+ fixes these by updating the expected results.
+
+2023-03-03 Nick Clifton <nickc@redhat.com>
+
+ Prevent the ASCII linker script directive from generating huge amounts of padding if the size expression is not a constant.
+ PR 30193 * ldgram.y (ASCII): Fail if the size is not a constant.
+
+2023-03-03 Andrew Burgess <aburgess@redhat.com>
+
+ gdb/python: replace strlen call with std::string::size call
+ Small cleanup to use std::string::size instead of calling strlen on
+ the result of std::string::c_str.
+
+ Should be no user visible changes after this call.
+
+2023-03-03 Jan Beulich <jbeulich@suse.com>
+
+ x86: use swap_2_operands() in build_vex_prefix()
+ Open-coding part of what may eventually be needed is somewhat risky.
+ Let's use the function we have, taking care of all pieces of data which
+ may need swapping, no matter that
+ - right now i.flags[] and i.reloc[] aren't relevant here (yet),
+ - EVEX masking and embedded broadcast aren't applicable.
+
+ x86: drop redundant calculation of EVEX broadcast size
+ In commit a5748e0d8c50 ("x86/Intel: allow MASM representation of
+ embedded broadcast") I replaced the calculation of i.broadcast.bytes in
+ check_VecOperands() not paying attention to the immediately following
+ call to get_broadcast_bytes() doing exactly that (again) first thing.
+
+2023-03-03 Jan Beulich <jbeulich@suse.com>
+
+ gas: default .debug section compression method adjustments
+ While commit b0c295e1b8d0 ("add --enable-default-compressed-debug-
+ sections-algorithm configure option") adjusted flag_compress_debug's
+ initializer, it didn't alter the default used when the command line
+ option was specified with an (optional!) argument. This rendered help
+ text inconsistent with actual behavior in certain configurations.
+
+ As to help text - the default reported there clearly shouldn't be
+ affected by a possible earlier --compress-debug-sections= option, so
+ flag_compress_debug can't be used when emitting usage information.
+
+2023-03-03 Jan Beulich <jbeulich@suse.com>
+
+ x86: avoid .byte in testcases where possible
+ In the course of using the upcoming .insn directive to eliminate various
+ .byte uses in testcases I've come across these, which needlessly use
+ more .byte than necessary even without the availability of .insn.
+
+2023-03-03 Alan Modra <amodra@gmail.com>
+
+ Tidy type handling in binutils/rdcoff.c
+ There isn't really any good reason for code in rdcoff.c to distinguish
+ between "basic" types and any other type. This patch dispenses with
+ the array reserved for basic types and instead handles all types using
+ coff_get_slot, simplifying the code.
+
+ * rdcoff.c (struct coff_types, coff_slots): Merge. Delete
+ coff_slots.
+ (T_MAX): Delete.
+ (parse_coff_base_type): Use coff_get_slot to store baseic types.
+ (coff_get_slot, parse_coff_type, parse_coff_base_type),
+ (parse_coff_struct_type, parse_coff_enum_type),
+ (parse_coff_symbol, parse_coff): Pass types as coff_types**.
+
+2023-03-03 Alan Modra <amodra@gmail.com>
+
+ binutils coff type list
+ As for commit 72d225ef9cc7, handle type numbers starting anywhere.
+
+ PR 17512
+ * rdcoff.c (struct coff_slots): Add base_index.
+ (coff_get_slot): Delete pr17512 excessively large slot check.
+ Don't allocate entire array from 0 to type number, allocate a
+ sparse array.
+
+2023-03-03 GDB Administrator <gdbadmin@sourceware.org>
+
+ Automatic date update in version.in
+
+2023-03-02 Simon Marchi <simon.marchi@efficios.com>
+
+ gdb: fix -Wmaybe-uninitialized warning in value.c
+ Since commit 11470e70ea0d ("gdb: store internalvars in an std::map"), bulding
+ with -O2, with g++ 11.3.0 on Ubuntu 22.04, I see:
+
+ CXX value.o
+ In constructor ‘internalvar::internalvar(internalvar&&)’,
+ inlined from ‘constexpr std::pair<_T1, _T2>::pair(_U1&&, _U2&&) [with _U1 = const char*&; _U2 = internalvar; typename std::enable_if<(std::_PCC<true, _T1, _T2>::_MoveConstructiblePair<_U1, _U2>() && std::_PCC<true, _T1, _T2>::_ImplicitlyMoveConvertiblePair<_U1, _U2>()), bool>::type <anonymous> = true; _T1 = const char*; _T2 = internalvar]’ at /usr/include/c++/11/bits/stl_pair.h:353:35,
+ inlined from ‘constexpr std::pair<typename std::__strip_reference_wrapper<typename std::decay<_Tp>::type>::__type, typename std::__strip_reference_wrapper<typename std::decay<_Tp2>::type>::__type> std::make_pair(_T1&&, _T2&&) [with _T1 = const char*&; _T2 = internalvar]’ at /usr/include/c++/11/bits/stl_pair.h:572:72,
+ inlined from ‘internalvar* create_internalvar(const char*)’ at /home/smarchi/src/binutils-gdb/gdb/value.c:1933:52:
+ /home/smarchi/src/binutils-gdb/gdb/value.c:1831:8: warning: ‘<unnamed>.internalvar::u’ may be used uninitialized [-Wmaybe-uninitialized]
+ 1831 | struct internalvar
+ | ^~~~~~~~~~~
+ /home/smarchi/src/binutils-gdb/gdb/value.c: In function ‘internalvar* create_internalvar(const char*)’:
+ /home/smarchi/src/binutils-gdb/gdb/value.c:1933:76: note: ‘<anonymous>’ declared here
+ 1933 | auto pair = internalvars.emplace (std::make_pair (name, internalvar (name)));
+ | ^
+
+ This is because the union field internalvar::u is not initialized when
+ constructing the temporary internalvar object above. That object is then used
+ for move-construction, and the (implicit) move constructor copies the
+ uninitialized bytes of field u over from the temporary object to the new
+ internalvar object. The compiler therefore complains that we use uninitialized
+ bytes. I don't think it's really a problem, because the internalvar object is
+ in the `kind == INTERNALVAR_VOID` state, in which the contents of the union is
+ irrelevant. Still, mute the warning by default-initializing the union.
+
+ Change-Id: I70c392842f35255f50d8e63f4099cb6685366fb7
+ Reviewed-By: Tom Tromey <tom@tromey.com>
+
+2023-03-02 Tom Tromey <tromey@adacore.com>
+
+ Handle half-float in 'x' command
+ Using 'x/hf' should print bytes as float16, but instead it currently
+ prints as an integer. I tracked this down to a missing case in
+ float_type_from_length.
+
+ Bug: https://sourceware.org/bugzilla/show_bug.cgi?id=30161
+ Approved-By: Simon Marchi <simon.marchi@efficios.com>
+
+2023-03-02 Tom Tromey <tromey@adacore.com>
+
+ Fix some value comments
+ I noticed a very stale comment in valarith.c. This patch fixes a few
+ comments in this area.
+
+ Reviewed-By: Andrew Burgess <aburgess@redhat.com>
+
+2023-03-02 Hui Li <lihui@loongson.cn>
+
+ gdb: LoongArch: Add support for static data member in struct
+ As described in C++ reference [1], static data members are not part
+ of objects of a given class type. Modified compute_struct_member ()
+ to ignore static data member so that we can get the expected result.
+
+ loongson@linux:~$ cat test.c
+ #include<stdio.h>
+ struct struct_01 { static unsigned a; float b;};
+ unsigned struct_01::a = 66;
+ struct struct_01 struct_01_val = { 99.00 };
+ int check_arg_struct(struct struct_01 arg)
+ {
+ printf("arg.a = %d\n", arg.a);
+ printf("arg.b = %f\n", arg.b);
+ return 0;
+ }
+ int main()
+ {
+ check_arg_struct(struct_01_val);
+ return 0;
+ }
+ loongson@linux:~$ g++ -g test.c -o test++
+ loongson@linux:~$ gdb test++
+
+ Without this patch:
+ ...
+ (gdb) start
+ ...
+ (gdb) p check_arg_struct(struct_01_val)
+ arg.a = 66
+ arg.b = 0.000000
+ $1 = 0
+
+ With this patch:
+ ...
+ (gdb) start
+ ...
+ (gdb) p check_arg_struct(struct_01_val)
+ arg.a = 66
+ arg.b = 99.000000
+ $1 = 0
+
+ [1] https://learn.microsoft.com/en-us/cpp/cpp/static-members-cpp?view=msvc-170
+
+ Reviewed-By: Tom Tromey <tom@tromey.com>
+
+2023-03-02 Alan Modra <amodra@gmail.com>
+
+ Don't write zeros to a gap in the output file
+ Writing out zeros is counterproductive if a file system supports
+ sparse files. A very large gap need not take much actual disk space,
+ but it usually will if zeros are written.
+
+ memory_bseek also supports not writing out zeros in a gap.
+
+ * elf.c (write_zeros): Delete.
+ (assign_file_positions_for_load_sections): Don't call write_zeros.
+ Comment.
+
+2023-03-02 Tom de Vries <tdevries@suse.de>
+
+ [gdb/symtab] Add set/show always-read-ctf on/off
+ [ This is a simplified rewrite of an earlier submission "[RFC][gdb/symtab] Add
+ maint set symbol-read-order", submitted here (
+ https://sourceware.org/pipermail/gdb-patches/2022-September/192044.html
+ ). ]
+
+ With the test-case included in this patch, we run into:
+ ...
+ (gdb) file dwarf2-and-ctf
+ (gdb) print var_ctf^M
+ 'var_ctf' has unknown type; cast it to its declared type^M
+ ...
+
+ The problem is that the executable contains both ctf and dwarf2, so the ctf
+ info (which contains the type information about var_ctf) is ignored.
+
+ GDB has support for handling multiple debug formats, but the common use case
+ for ctf is to be used when dwarf2 is not present, and gdb reflects that,
+ assuming that by reading ctf in addition there won't be any extra information,
+ so it's not worth the additional cycles and memory.
+
+ Add a new command "set/show always-read-ctf on/off", that when on forces
+ unconditional reading of ctf, allowing us to do:
+ ...
+ (gdb) set always-read-ctf on
+ (gdb) file dwarf2-and-ctf
+ (gdb) print var_ctf^M
+ $2 = 2^M
+ ...
+
+ The setting is off by default, preserving current behaviour.
+
+ A bit of background on the relevance of reading order: the formats have a
+ priority relationship between them, where reading earlier means lower
+ priority. By reading the format with the most detail last, we ensure it has
+ the highest priority, which makes sure that in case there is overlapping info,
+ the most detailed info is found. This explains the current reading order of
+ mdebug, stabs and dwarf2.
+
+ Add the unconditional reading of ctf before dwarf2, because it's less detailed
+ than dwarf2. The conditional reading of ctf is still done after the attempt to
+ read dwarf2, necessarily so because we only know whether there's dwarf2 after
+ we've tried to read it.
+
+ The new command allow us to replace uses of -Wl,--strip-debug added in commit
+ 908a926ec4e ("[gdb/testsuite] Fix ctf test-cases on openSUSE Tumbleweed") by
+ uses of "set always-read-ctf on", but I've left that for another commit.
+
+ Tested on x86_64-linux.
+
+ Reviewed-By: Eli Zaretskii <eliz@gnu.org>
+ Reviewed-By: Tom Tromey <tom@tromey.com>
+
+2023-03-02 Simon Marchi <simon.marchi@efficios.com>
+
+ gdb: update some copyright years (2022 -> 2023)
+ The copyright years in the ROCm files (e.g. solib-rocm.c) are wrong,
+ they end in 2022 instead of 2023. I suppose because I posted (or at
+ least prepared) the patches in 2022 but merged them in 2023, and forgot
+ to update the year. I found a bunch of other files that are in the same
+ situation. Fix them all up.
+
+ Change-Id: Ia55f5b563606c2ba6a89046f22bc0bf1c0ff2e10
+ Reviewed-By: Tom Tromey <tom@tromey.com>
+
+2023-03-02 GDB Administrator <gdbadmin@sourceware.org>
+
+ Automatic date update in version.in
+
+2023-03-01 Tom Tromey <tromey@adacore.com>
+
+ Use const for dwarf2_property_baton
+ Once a baton is stored in a struct type, it doesn't make sense to
+ modify it. This patch constifies the API.
+
+ Approved-By: Simon Marchi <simon.marchi@efficios.com>
+
+2023-03-01 Tom Tromey <tromey@adacore.com>
+
+ Make gdb property batons type-safe
+ gdbtypes treats dynamic property batons as 'void *', but in actuality
+ the only users all use dwarf2_property_baton. This patch changes this
+ code to be type-safe. If a new type is needed here, it seems like
+ that too could be done in a type-safe way.
+
+ Approved-By: Simon Marchi <simon.marchi@efficios.com>
+
+2023-03-01 Alan Modra <amodra@gmail.com>
+
+ More bounds checking in macro_expand
+ * macro.c (macro_expand): Ensure input string buffer is not
+ read past end.
+
+2023-03-01 Alan Modra <amodra@gmail.com>
+
+ Using .mri in assembly
+ Changing mri mode between macro definition and use isn't good. This
+ .macro x
+ .endm
+ .mri 1
+ x
+ leads to a segfault. Fixed with the following patch, but I suppose
+ what should really happen is that macros be marked as being mri mode
+ when defined, and that determine whether the magic NARG parameter be
+ supplied at expansion. Nobody has complained about this in 30 years
+ so I'm not inclined to change gas behaviour to that extent.
+
+ * macro.c (macro_expand): Don't segfault in mri mode if NARG
+ formal isn't found.
+
+2023-03-01 Tom Tromey <tromey@adacore.com>
+
+ Fix type of check_valid_shift_count parameter
+ check_valid_shift_count has an 'int' parameter that really should be
+ an enum exp_opcode. This patch makes the change. Tested by
+ rebuilding.
+
+2023-03-01 Simon Marchi <simon.marchi@efficios.com>
+
+ gdb: fix a whitespace issue in solib-rocm.c
+ Change-Id: I9cd236eaf161fe3a1abf0d212efca47a7149e021
+
+2023-03-01 Nick Clifton <nickc@redhat.com>
+
+ Fix typo with my email address
+
+2023-03-01 Tom Tromey <tom@tromey.com>
+
+ Fix btrace regression
+ Tom de Vries pointed out that my earlier patch:
+
+ commit 873a185be258ad2552b9579005852815b4da5baf
+ Date: Fri Dec 16 07:56:57 2022 -0700
+
+ Don't use struct buffer in handle_qxfer_btrace
+
+ regressed gdb.btrace/reconnect.exp. I didn't notice this because I
+ did not have libipt installed.
+
+ This patch fixes the bug.
+
+ Bug: https://sourceware.org/bugzilla/show_bug.cgi?id=30169
+ Tested-By: Bruno Larsen <blarsen@redhat.com>
+
+2023-03-01 Tom de Vries <tdevries@suse.de>
+
+ [gdb/testsuite] Add another xfail case in gdb.python/py-record-btrace.exp
+ I ran into:
+ ...
+ (gdb) PASS: gdb.python/py-record-btrace.exp: function call: \
+ python print(c.prev)
+ python print(c == c.next.prev)^M
+ Traceback (most recent call last):^M
+ File "<string>", line 1, in <module>^M
+ AttributeError: 'NoneType' object has no attribute 'prev'^M
+ Error while executing Python code.^M
+ (gdb) FAIL: gdb.python/py-record-btrace.exp: function call: \
+ python print(c == c.next.prev)
+ ...
+ due to having only 4 insn instead of 100:
+ ...
+ python print(len(insn))^M
+ 4^M
+ ...
+
+ This could be caused by the same hw bug as we already have an xfail for, so
+ expand the xfail matching.
+
+ Tested on x86_64-linux.
+
+ PR testsuite/30185
+ Bug: https://sourceware.org/bugzilla/show_bug.cgi?id=30185
+
+ Approved-By: Markus T. Metzger <markus.t.metzger@intel.com>
+
+2023-03-01 Alan Modra <amodra@gmail.com>
+
+ Catch overflow in gas s_space
+ Also fix an error introduced in 1998 in reporting a zero count for
+ negative counts.
+
+ * read.c (s_space): Use unsigned multiply, and catch overflow.
+ Correct order of tests for invalid repeat counts. Ensure
+ ignored directives don't affect mri_pending_align.
+
+2023-03-01 Alan Modra <amodra@gmail.com>
+
+ gas s_fill caused internal error in frag_new
+ Fix an internal error after "non-constant fill count for absolute
+ section".
+
+ * read.c (s_fill): Don't create frags after errors.
+
+2023-03-01 Alan Modra <amodra@gmail.com>
+
+ Memory leak in gas do_repeat
+ * read.c (do_repeat): Free sb on error path.
+
+2023-03-01 GDB Administrator <gdbadmin@sourceware.org>
+
+ Automatic date update in version.in
+
+2023-02-28 Simon Marchi <simon.marchi@efficios.com>
+
+ gdb: add HtabPrinter to gdb-gdb.py.in
+ When debugging GDB, I find it a bit tedious to inspect htab_t objects.
+ It is possible to find the entries by poking at the fields, but it's
+ annoying to do each time. I think a pretty printer would help. Add a
+ basic one to gdb-gdb.py.
+
+ The pretty printer advertises itself as "array-like", and the result
+ looks like:
+
+ (top-gdb) p bfcache
+ $3 = htab_t with 3 elements = {0x6210003252a0, 0x62100032caa0, 0x62100033baa0}
+
+ The htab_t itself doesn't know about the type of pointed objects. But
+ it's easy enough to cast the addresses to the right type to use them:
+
+ (top-gdb) print *((btrace_frame_cache *) 0x6210003252a0)
+ $6 = {tp = 0x61700002ed80, frame = 0x6210003251e0, bfun = 0x62000000b390}
+
+ Change-Id: Ia692e3555fe7a117b7ec087840246b1260a704c6
+ Reviewed-By: Tom Tromey <tom@tromey.com>
+
+2023-02-28 Tom de Vries <tdevries@suse.de>
+
+ [gdb/testsuite] Fix gdb.python/py-breakpoint.exp timeouts
+ On powerpc64le-linux, I run into two timeouts:
+ ...
+ FAIL: gdb.python/py-breakpoint.exp: test_watchpoints: \
+ Test watchpoint write (timeout)
+ FAIL: gdb.python/py-breakpoint.exp: test_bkpt_internal: \
+ Test watchpoint write (timeout)
+ ...
+
+ In this case, hw watchpoints are not supported, and using sw watchpoints
+ is slow.
+
+ Most of the time is spent in handling a try-catch, which triggers a malloc. I
+ think this bit is more relevant for the "catch throw" part of the test-case,
+ so fix the timeouts by setting the watchpoints after the try-catch.
+
+ Tested on x86_64-linux and powerpc64le-linux.
+
+2023-02-28 Tom Tromey <tromey@adacore.com>
+
+ Remove value_in
+ value_in is unused. From git log, it seems to have been part of the
+ Chill language, which was removed from gdb eons ago. This patch
+ removes the function. Tested by rebuilding.
+
+2023-02-28 Tom de Vries <tdevries@suse.de>
+
+ [gdb/testsuite] Fix gdb.rust/watch.exp on ppc64le
+ On x86_64-linux, I have:
+ ...
+ (gdb) watch -location y^M
+ Hardware watchpoint 2: -location y^M
+ (gdb) PASS: gdb.rust/watch.exp: watch -location y
+ ...
+ but on powerpc64le-linux, I run into:
+ ...
+ (gdb) watch -location y^M
+ Watchpoint 2: -location y^M
+ (gdb) FAIL: gdb.rust/watch.exp: watch -location y
+ ...
+ due to the regexp matching "Hardware watchpoint" but not "Watchpoint":
+ ...
+ gdb_test "watch -location y" ".*watchpoint .* -location .*"
+ ...
+
+ Fix this by making the regexp less restrictive.
+
+ Tested on x86_64-linux and powerpc64le-linux.
+
+2023-02-28 Andrew Burgess <aburgess@redhat.com>
+
+ gdb: fix mi breakpoint-deleted notifications for thread-specific b/p
+ Background
+ ----------
+
+ When a thread-specific breakpoint is deleted as a result of the
+ specific thread exiting the function remove_threaded_breakpoints is
+ called which sets the disposition of the breakpoint to
+ disp_del_at_next_stop and sets the breakpoint number to 0. Setting
+ the breakpoint number to zero has the effect of hiding the breakpoint
+ from the user. We also print a message indicating that the breakpoint
+ has been deleted.
+
+ It was brought to my attention during a review of another patch[1]
+ that setting a breakpoints number to zero will suppress the MI
+ breakpoint-deleted notification for that breakpoint, and indeed, this
+ can be seen to be true, in delete_breakpoint, if the breakpoint number
+ is zero, then GDB will not notify the breakpoint_deleted observer.
+
+ It seems wrong that a user created, thread-specific breakpoint, will
+ have a =breakpoint-created notification, but will not have a
+ =breakpoint-deleted notification. I suspect that this is a bug.
+
+ [1] https://sourceware.org/pipermail/gdb-patches/2023-February/196560.html
+
+ The First Problem
+ -----------------
+
+ During my initial testing I wanted to see how GDB handled the
+ breakpoint after it's number was set to zero. To do this I created
+ the testcase gdb.threads/thread-bp-deleted.exp. This test creates a
+ worker thread, which immediately exits. After the worker thread has
+ exited the main thread spins in a loop.
+
+ In GDB I break once the worker thread has been created and place a
+ thread-specific breakpoint, then use 'continue&' to resume the
+ inferior in non-stop mode. The worker thread then exits, but the main
+ thread never stops - instead it sits in the spin. I then tried to use
+ 'maint info breakpoints' to see what GDB thought of the
+ thread-specific breakpoint.
+
+ Unfortunately, GDB crashed like this:
+
+ (gdb) continue&
+ Continuing.
+ (gdb) [Thread 0x7ffff7c5d700 (LWP 1202458) exited]
+ Thread-specific breakpoint 3 deleted - thread 2 no longer in the thread list.
+ maint info breakpoints
+ ... snip some output ...
+
+ Fatal signal: Segmentation fault
+ ----- Backtrace -----
+ 0x5ffb62 gdb_internal_backtrace_1
+ ../../src/gdb/bt-utils.c:122
+ 0x5ffc05 _Z22gdb_internal_backtracev
+ ../../src/gdb/bt-utils.c:168
+ 0x89965e handle_fatal_signal
+ ../../src/gdb/event-top.c:964
+ 0x8997ca handle_sigsegv
+ ../../src/gdb/event-top.c:1037
+ 0x7f96f5971b1f ???
+ /usr/src/debug/glibc-2.30-2-gd74461fa34/nptl/../sysdeps/unix/sysv/linux/x86_64/sigaction.c:0
+ 0xe602b0 _Z15print_thread_idP11thread_info
+ ../../src/gdb/thread.c:1439
+ 0x5b3d05 print_one_breakpoint_location
+ ../../src/gdb/breakpoint.c:6542
+ 0x5b462e print_one_breakpoint
+ ../../src/gdb/breakpoint.c:6702
+ 0x5b5354 breakpoint_1
+ ../../src/gdb/breakpoint.c:6924
+ 0x5b58b8 maintenance_info_breakpoints
+ ../../src/gdb/breakpoint.c:7009
+ ... etc ...
+
+ As the thread-specific breakpoint is set to disp_del_at_next_stop, and
+ GDB hasn't stopped yet, then the breakpoint still exists in the global
+ breakpoint list.
+
+ The breakpoint will not show in 'info breakpoints' as its number is
+ zero, but it will show in 'maint info breakpoints'.
+
+ As GDB prints the breakpoint, the thread-id for the breakpoint is
+ printed as part of the 'stop only in thread ...' line. Printing the
+ thread-id involves calling find_thread_global_id to convert the global
+ thread-id into a thread_info*. Then calling print_thread_id to
+ convert the thread_info* into a string.
+
+ The problem is that find_thread_global_id returns nullptr as the
+ thread for the thread-specific breakpoint has exited. The
+ print_thread_id assumes it will be passed a non-nullptr. As a result
+ GDB crashes.
+
+ In this commit I've added an assert to print_thread_id (gdb/thread.c)
+ to check that the pointed passed in is not nullptr. This assert would
+ have triggered in the above case before GDB crashed.
+
+ MI Notifications: The Dangers Of Changing A Breakpoint's Number
+ ---------------------------------------------------------------
+
+ Currently the delete_breakpoint function doesn't trigger the
+ breakpoint_deleted observer for any breakpoint with the number zero.
+
+ There is a comment explaining why this is the case in the code; it's
+ something about watchpoints. But I did consider just removing the 'is
+ the number zero' guard and always triggering the breakpoint_deleted
+ observer, figuring that I'd then fix the watchpoint issue some other
+ way.
+
+ But I realised this wasn't going to be good enough. When the MI
+ notification was delivered the number would be zero, so any frontend
+ parsing the notifications would not be able to match
+ =breakpoint-deleted notification to the earlier =breakpoint-created
+ notification.
+
+ What this means is that, at the point the breakpoint_deleted observer
+ is called, the breakpoint's number must be correct.
+
+ MI Notifications: The Dangers Of Delaying Deletion
+ --------------------------------------------------
+
+ The test I used to expose the above crash also brought another problem
+ to my attention. In the above test we used 'continue&' to resume,
+ after which a thread exited, but the inferior didn't stop. Recreating
+ the same test in the MI looks like this:
+
+ -break-insert -p 2 main
+ ^done,bkpt={number="2",type="breakpoint",disp="keep",...<snip>...}
+ (gdb)
+ -exec-continue
+ ^running
+ *running,thread-id="all"
+ (gdb)
+ ~"[Thread 0x7ffff7c5d700 (LWP 987038) exited]\n"
+ =thread-exited,id="2",group-id="i1"
+ ~"Thread-specific breakpoint 2 deleted - thread 2 no longer in the thread list.\n"
+
+ At this point the we have a single thread left, which is still
+ running:
+
+ -thread-info
+ ^done,threads=[{id="1",target-id="Thread 0x7ffff7c5eb80 (LWP 987035)",name="thread-bp-delet",state="running",core="4"}],current-thread-id="1"
+ (gdb)
+
+ Notice that we got the =thread-exited notification from GDB as soon as
+ the thread exited. We also saw the CLI line from GDB, the line
+ explaining that breakpoint 2 was deleted. But, as expected, we didn't
+ see the =breakpoint-deleted notification.
+
+ I say "as expected" because the number was set to zero. But, even if
+ the number was not set to zero we still wouldn't see the
+ notification. The MI notification is driven by the breakpoint_deleted
+ observer, which is only called when we actually delete the breakpoint,
+ which is only done the next time GDB stops.
+
+ Now, maybe this is fine. The notification is delivered a little
+ late. But remember, by setting the number to zero the breakpoint will
+ be hidden from the user, for example, the breakpoint is removed from
+ the MI's -break-info command output.
+
+ This means that GDB is in a position where the breakpoint doesn't show
+ up in the breakpoint table, but a =breakpoint-deleted notification has
+ not yet been sent out. This doesn't seem right to me.
+
+ What this means is that, when the thread exits, we should immediately
+ be sending out the =breakpoint-deleted notification. We should not
+ wait for GDB to next stop before sending the notification.
+
+ The Solution
+ ------------
+
+ My proposed solution is this; in remove_threaded_breakpoints, instead
+ of setting the disposition to disp_del_at_next_stop and setting the
+ number to zero, we now just call delete_breakpoint directly.
+
+ The notification will now be sent out immediately; as soon as the
+ thread exits.
+
+ As the number has not changed when delete_breakpoint is called, the
+ notification will have the correct number.
+
+ And as the breakpoint is immediately removed from the breakpoint list,
+ we no longer need to worry about 'maint info breakpoints' trying to
+ print the thread-id for an exited thread.
+
+ My only concern is that calling delete_breakpoint directly seems so
+ obvious that I wonder why the original patch (that added
+ remove_threaded_breakpoints) didn't take this approach. This code was
+ added in commit 49fa26b0411d, but the commit message offers no clues
+ to why this approach was taken, and the original email thread offers
+ no insights either[2]. There are no test regressions after making
+ this change, so I'm hopeful that this is going to be fine.
+
+ [2] https://sourceware.org/pipermail/gdb-patches/2013-September/106493.html
+
+ The Complication
+ ----------------
+
+ Of course, it couldn't be that simple.
+
+ The script gdb.python/py-finish-breakpoint.exp had some regressions
+ during testing.
+
+ The problem was with the FinishBreakpoint.out_of_scope callback
+ implementation. This callback is supposed to trigger whenever the
+ FinishBreakpoint goes out of scope; and this includes when the thread
+ for the breakpoint exits.
+
+ The problem I ran into is the Python FinishBreakpoint implementation.
+ Specifically, after this change I was loosing some of the out_of_scope
+ calls.
+
+ The problem is that the out_of_scope call (of which I'm interested) is
+ triggered from the inferior_exit observer. Before my change the
+ observers were called in this order:
+
+ thread_exit
+ inferior_exit
+ breakpoint_deleted
+
+ The inferior_exit would trigger the out_of_scope call.
+
+ After my change the breakpoint_deleted notification (for
+ thread-specific breakpoints) occurs earlier, as soon as the
+ thread-exits, so now the order is:
+
+ thread_exit
+ breakpoint_deleted
+ inferior_exit
+
+ Currently, after the breakpoint_deleted call the Python object
+ associated with the breakpoint is released, so, when we get to the
+ inferior_exit observer, there's no longer a Python object to call the
+ out_of_scope method on.
+
+ My solution is to follow the model for how bpfinishpy_pre_stop_hook
+ and bpfinishpy_post_stop_hook are called, this is done from
+ gdbpy_breakpoint_cond_says_stop in py-breakpoint.c.
+
+ I've now added a new bpfinishpy_pre_delete_hook
+ gdbpy_breakpoint_deleted in py-breakpoint.c, and from this new hook
+ function I check and where needed call the out_of_scope method.
+
+ With this fix in place I now see the
+ gdb.python/py-finish-breakpoint.exp test fully passing again.
+
+ Testing
+ -------
+
+ Tested on x86-64/Linux with unix, native-gdbserver, and
+ native-extended-gdbserver boards.
+
+ New tests added to covers all the cases I've discussed above.
+
+ Approved-By: Pedro Alves <pedro@palves.net>
+
+2023-02-28 Andrew Burgess <aburgess@redhat.com>
+
+ gdb/testsuite: fix failure in gdb.mi/mi-pending.exp with extended-remote
+ I currently see this failure when running the gdb.mi/mi-pending.exp
+ test using the native-extended-remote board:
+
+ -break-insert -f -c x==4 mi-pendshr.c:pendfunc2
+ &"No source file named mi-pendshr.c.\n"
+ ^done,bkpt={number="2",type="breakpoint",disp="keep",enabled="y",addr="<PENDING>",pending="mi-pendshr.c:pendfunc2",cond="x==4",evaluated-by="host",times="0",original-location="mi-pendshr.c:pendfunc2"}
+ (gdb)
+ FAIL: gdb.mi/mi-pending.exp: MI pending breakpoint on mi-pendshr.c:pendfunc2 if x==4 (unexpected output)
+
+ The failure is caused by the 'evaluated-by="host"' string, which only
+ appears in the output when the test is run using the
+ native-extended-remote board.
+
+ I could fix this by just updating the pattern in
+ gdb.mi/mi-pending.exp, but I have instead updated mi-pending.exp to
+ make more use of the support procs in mi-support.exp. This did
+ require making a couple of adjustments to mi-support.exp, but I think
+ the result is that mi-pending.exp is now easier to read, and I see no
+ failures with native-extended-remote anymore.
+
+ One of the test names has changed after this work, I think the old
+ test name was wrong - it described a breakpoint as pending when the
+ breakpoint was not pending, I suspect a copy & paste error.
+
+ But there's no changes to what is actually being tested after this
+ patch.
+
+ Approved-By: Pedro Alves <pedro@palves.net>
+
+2023-02-28 Andrew Burgess <aburgess@redhat.com>
+
+ gdb/testsuite: introduce is_target_non_stop helper proc
+ I noticed that several tests included copy & pasted code to run the
+ 'maint show target-non-stop' command, and then switch based on the
+ result.
+
+ In this commit I factor this code out into a helper proc in
+ lib/gdb.exp, and update all the places I could find that used this
+ pattern to make use of the helper proc.
+
+ There should be no change in what is tested after this commit.
+
+ Reviewed-By: Pedro Alves <pedro@palves.net>
+
+2023-02-28 Andrew Burgess <aburgess@redhat.com>
+
+ gdb/testsuite introduce foreach_mi_ui_mode helper proc
+ Introduce foreach_mi_ui_mode, a helper proc which can be used when
+ tests are going to be repeated once with the MI in the main UI, and
+ once with the MI on a separate UI.
+
+ The proc is used like this:
+
+ foreach_mi_ui_mode VAR {
+ # BODY
+ }
+
+ The BODY will be run twice, once with VAR set to 'main' and once with
+ VAR set to 'separate', inside BODY we can then change the behaviour
+ based on the current UI mode.
+
+ The point of this proc is that we sometimes shouldn't run the separate
+ UI tests (when gdb_debug_enabled is true), and this proc hides all
+ this logic. If the separate UI mode should not be used then BODY will
+ be run just once with VAR set to 'main'.
+
+ I've updated two tests that can make use of this helper proc. I'm
+ going to add another similar test in a later commit.
+
+ There should be no change to what is tested with this commit.
+
+ Approved-By: Pedro Alves <pedro@palves.net>
+
+2023-02-28 Andrew Burgess <aburgess@redhat.com>
+
+ gdb/testsuite: extend the use of mi_clean_restart
+ The mi_clean_restart proc calls the mi_gdb_start proc passing no
+ arguments.
+
+ In this commit I add an extra (optional) argument to the
+ mi_clean_restart proc, and pass this through to mi_gdb_start.
+
+ The benefit of this is that we can now use mi_clean_restart when we
+ also want to pass the 'separate-mi-tty' or 'separate-inferior-tty'
+ flags to mi_gdb_start, and avoids having to otherwise duplicate the
+ contents of mi_clean_restart in different tests.
+
+ I've updated the obvious places where this new functionality can be
+ used, and I'm seeing no test regressions.
+
+ Reviewed-By: Pedro Alves <pedro@palves.net>
+
+2023-02-28 Andrew Burgess <aburgess@redhat.com>
+
+ gdb/testsuite: make more use of mi-support.exp
+ Building on the previous commit, now that the breakpoint related
+ support functions in lib/mi-support.exp can now help creating the
+ patterns for thread specific breakpoints, make use of this
+ functionality for gdb.mi/mi-nsmoribund.exp and gdb.mi/mi-pending.exp.
+
+ There should be no changes in what is tested after this commit.
+
+ Reviewed-By: Pedro Alves <pedro@palves.net>
+
+2023-02-28 Andrew Burgess <aburgess@redhat.com>
+
+ gdb: don't duplicate 'thread' field in MI breakpoint output
+ When creating a thread-specific breakpoint with a single location, the
+ 'thread' field would be repeated in the MI output. This can be seen
+ in two existing tests gdb.mi/mi-nsmoribund.exp and
+ gdb.mi/mi-pending.exp, e.g.:
+
+ (gdb)
+ -break-insert -p 1 bar
+ ^done,bkpt={number="1",type="breakpoint",disp="keep",
+ enabled="y",
+ addr="0x000000000040110a",func="bar",
+ file="/tmp/mi-thread-specific-bp.c",
+ fullname="/tmp/mi-thread-specific-bp.c",
+ line="32",thread-groups=["i1"],
+ thread="1",thread="1", <================ DUPLICATION!
+ times="0",original-location="bar"}
+
+ I know we need to be careful when adjusting MI output, but I'm hopeful
+ in this case, as the field is duplicated, and the field contents are
+ always identical, that we might get away with removing one of the
+ duplicates.
+
+ The change in GDB is a fairly trivial condition change.
+
+ We did have a couple of tests that contained the duplicate fields in
+ their expected output, but given there was no comment pointing out
+ this oddity either in the GDB code, or in the test, I suspect this was
+ more a case of copying whatever output GDB produced and using that as
+ the expected results. I've updated these tests to remove the
+ duplication.
+
+ I've update lib/mi-support.exp to provide support for building
+ breakpoint patterns that contain the thread field, and I've made use
+ of this in a new test I've added that is just about creating
+ thread-specific breakpoints and checking the results. The two tests I
+ mentioned above as being updated could also use the new
+ lib/mi-support.exp functionality, but I'm going to do that in a later
+ patch, this way it is clear what changes I'm actually proposing to
+ make to the expected output.
+
+ As I said, I hope that frontends will be able to handle this change,
+ but I still think its worth adding a NEWS entry, that way, if someone
+ runs into problems, there's a chance they can figure out what's going
+ on.
+
+ This should not impact CLI output at all.
+
+ Reviewed-By: Eli Zaretskii <eliz@gnu.org>
+ Approved-By: Pedro Alves <pedro@palves.net>
+
+2023-02-28 Andrew Burgess <aburgess@redhat.com>
+
+ gdb: remove an out of date comment about disp_del_at_next_stop
+ Delete an out of date comment about disp_del_at_next_stop, the comment
+ says:
+
+ /* NOTE drow/2003-09-08: This state only exists for removing
+ watchpoints. It's not clear that it's necessary... */
+
+ I'm sure this was true when the comment was added, but today the
+ disp_del_at_next_stop state is not just used for deleting watchpoints,
+ which leaves us with "It's not clear that it's necessary...", which
+ doesn't really help at all.
+
+ And then this comment is located on one random place where
+ disp_del_at_next_stop is used, rather than at its definition site.
+
+ Lets just delete the comment.
+
+ No user visible changes after this commit.
+
+ Reviewed-By: Pedro Alves <pedro@palves.net>
+
+2023-02-28 Richard Ball <richard.ball@arm.com>
+
+ [Aarch64] Add Binutils support for MEC
+ This change supports MEC which is part of RME (Realm Management Extension).
+
+2023-02-28 Alan Modra <amodra@gmail.com>
+
+ chew.c printf of intptr_t
+ Seen when building binutils with gcc -m32 on x86_64-linux.
+ chew.c: In function ‘print’:
+ chew.c:1434:59: warning: format ‘%ld’ expects argument of type ‘long int’, but argument 3 has type ‘intptr_t’ {aka ‘int’} [-Wformat=]
+ 1434 | fprintf (stderr, "print: illegal print destination `%ld'\n", *isp);
+ | ~~^ ~~~~
+ | | |
+ | | intptr_t {aka int}
+ | long int
+ | %d
+
+ * chew.c: Include inttypes.h.
+ (print): Use PRIdPTR for *isp.
+
+2023-02-28 Mark Harmstone <mark@harmstone.com>
+
+ ld: Sort section contributions in PDB files
+ Microsoft's DIA library, and thus also MSVC and WinDbg, expects section
+ contributions to be ordered by section number and offset, otherwise it's
+ unable to resolve line numbers.
+
+2023-02-28 Alan Modra <amodra@gmail.com>
+
+ Free ecoff debug info
+ This frees memory associated with the mips ecoff find_nearest_line.
+
+ * elfxx-mips.x (free_ecoff_debug): New function, extracted from..
+ (_bfd_mips_elf_read_ecoff_info): ..here. Free ext_hdr earlier.
+ Don't clear already NULL fdr.
+ (struct mips_elf_find_line): Move earlier.
+ (_bfd_mips_elf_close_and_cleanup): Call free_ecoff_debug.
+ (_bfd_mips_elf_find_nearest_line): Likewise on error paths,
+ and to clean up input_debug when done.
+
+2023-02-28 Alan Modra <amodra@gmail.com>
+
+ Add some sanity checking in ECOFF lookup_line
+ More anti-fuzzer bounds checking for the ECOFF support. A lot of this
+ is in ancient code using "long" for counts and sizes, which is why the
+ patch uses "(long) ((unsigned long) x + 1) > 0" in a few places. The
+ unsigned long cast is so that "x + 1" doesn't trigger ubsan warnings
+ about signed integer overflow. It would be a good idea to replace
+ most of the longs used in binutils with size_t, but that's more than I
+ care to do for COFF/ECOFF.
+
+ * ecofflink.c (mk_fdrtab): Sanity check string offsets.
+ (lookup_line): Likewise, and symbol indices.
+
+2023-02-28 Alan Modra <amodra@gmail.com>
+
+ Another PE SEC_HAS_CONTENTS test
+ I'd skipped this one before, thinking "obfd, that's the linker output
+ bfd so no need to test". Wrong, this is objcopy output.
+
+ * peXXigen.c (_bfd_XX_bfd_copy_private_bfd_data_common): Test
+ SEC_HAS_CONTENTS before reading section.
+
+2023-02-28 GDB Administrator <gdbadmin@sourceware.org>
+
+ Automatic date update in version.in
+
+2023-02-27 Kevin Buettner <kevinb@redhat.com>
+
+ Forced quit cases handled by resetting sync_quit_force_run
+ During my audit of the use of gdb_exception with regard to QUIT
+ processing, I found a try/catch in the scoped_switch_fork_info
+ destructor.
+
+ Static analysis found this call path from the destructor to
+ maybe_quit():
+
+ scoped_switch_fork_info::~scoped_switch_fork_info()
+ -> remove_breakpoints()
+ -> remove_breakpoint(bp_location*)
+ -> remove_breakpoint_1(bp_location*, remove_bp_reason)
+ -> memory_validate_breakpoint(gdbarch*, bp_target_info*)
+ -> target_read_memory(unsigned long, unsigned char*, long)
+ -> target_read(target_ops*, target_object, char const*, unsigned char*, unsigned long, long)
+ -> maybe_quit()
+
+ Since it's not safe to do a 'throw' from a destructor, we simply
+ call set_quit_flag and, for gdb_exception_forced_quit, also
+ set sync_quit_force_run. This will cause the appropriate
+ exception to be rethrown at the next QUIT check.
+
+ Another case is the try / catch in tui_getc() in tui-io.c. The
+ existing catch swallows the exception. I've added a catch for
+ 'gdb_exception_forced_quit', which also swallows the exception,
+ but also sets sync_quit_force_run and calls set_quit_flag in
+ order to restart forced quit processing at the next QUIT check.
+ This is required because it isn't safe to throw into/through
+ readline.
+
+ Thanks to Pedro Alves for suggesting this idea.
+
+ Bug: https://sourceware.org/bugzilla/show_bug.cgi?id=26761
+ Tested-by: Tom de Vries <tdevries@suse.de>
+ Approved-By: Pedro Alves <pedro@palves.net>
+
+2023-02-27 Kevin Buettner <kevinb@redhat.com>
+
+ Introduce set_force_quit_flag and change type of sync_quit_force_run
+ At the moment, handle_sigterm() in event-top.c does the following:
+
+ sync_quit_force_run = 1;
+ set_quit_flag ();
+
+ This was used several more times in a later patch in this series, so
+ I'm introducing (at Pedro's suggestion) a new function named
+ 'set_force_quit_flag'. It simply sets sync_quit_force_run and also
+ calls set_quit_flag(). I've revised the later patch to call
+ set_force_quit_flag instead.
+
+ I noticed that sync_quit_force_run is declared as an int but is being
+ used as a bool, so I also changed its type to bool in this commit.
+
+ Bug: https://sourceware.org/bugzilla/show_bug.cgi?id=26761
+ Approved-By: Pedro Alves <pedro@palves.net>
+
+2023-02-27 Kevin Buettner <kevinb@redhat.com>
+
+ QUIT processing w/ explicit throw for gdb_exception_forced_quit
+ This commit contains changes which have an explicit throw for
+ gdb_exception_forced_quit, or, in a couple of cases for gdb_exception,
+ but with a throw following a check to see if 'reason' is
+ RETURN_FORCED_QUIT.
+
+ Most of these are straightforward - it made sense to continue to allow
+ an existing catch of gdb_exception to also catch gdb_exception_quit;
+ in these cases, a catch/throw for gdb_exception_forced_quit was added.
+
+ There are two cases, however, which deserve a more detailed
+ explanation.
+
+ 1) remote_fileio_request in gdb/remote-fileio.c:
+
+ The try block calls do_remote_fileio_request which can (in turn)
+ call one of the functions in remote_fio_func_map[]. Taking the
+ first one, remote_fileio_func_open(), we have the following call
+ path to maybe_quit():
+
+ remote_fileio_func_open(remote_target*, char*)
+ -> target_read_memory(unsigned long, unsigned char*, long)
+ -> target_read(target_ops*, target_object, char const*, unsigned char*, unsigned long, long)
+ -> maybe_quit()
+
+ Since there is a path to maybe_quit(), we must ensure that the
+ catch block is not permitted to swallow a QUIT representing a
+ SIGTERM.
+
+ However, for this case, we must take care not to change the way that
+ Ctrl-C / SIGINT is handled; we want to send a suitable EINTR reply to
+ the remote target should that happen. That being the case, I added a
+ catch/throw for gdb_exception_forced_quit. I also did a bit of
+ rewriting here, adding a catch for gdb_exception_quit in favor of
+ checking the 'reason' code in the catch block for gdb_exception.
+
+ 2) mi_execute_command in gdb/mi/mi-main.c:
+
+ The try block calls captured_mi_execute_command(); there exists
+ a call path to maybe_quit():
+
+ captured_mi_execute_command(ui_out*, mi_parse*)
+ -> mi_cmd_execute(mi_parse*)
+ -> get_current_frame()
+ -> get_prev_frame_always_1(frame_info*)
+ -> frame_register_unwind_location(frame_info*, int, int*, lval_type*, unsigned long*, int*)
+ -> frame_register_unwind(frame_info*, int, int*, int*, lval_type*, unsigned long*, int*, unsigned char*)
+ -> value_entirely_available(value*)
+ -> value_fetch_lazy(value*)
+ -> value_fetch_lazy_memory(value*)
+ -> read_value_memory(value*, long, int, unsigned long, unsigned char*, unsigned long)
+ -> maybe_quit()
+
+ That being the case, we can't allow the exception handler (catch block)
+ to swallow a gdb_exception_quit for SIGTERM. However, it does seem
+ reasonable to output the exception via the mi interface so that some
+ suitable message regarding SIGTERM might be printed; therefore, I
+ check the exception's 'reason' field for RETURN_FORCED_QUIT and
+ do a throw for this case.
+
+ Bug: https://sourceware.org/bugzilla/show_bug.cgi?id=26761
+ Tested-by: Tom de Vries <tdevries@suse.de>
+ Approved-By: Pedro Alves <pedro@palves.net>
+
+2023-02-27 Kevin Buettner <kevinb@redhat.com>
+
+ Guile QUIT processing updates
+ This commit contains QUIT processing updates for GDB's Guile support.
+ As with the Python updates, we don't want to permit this code to
+ swallow the exception, gdb_exception_forced_quit, which is associated
+ with GDB receiving a SIGTERM.
+
+ I've adopted the same solution that I used for Python; whereever
+ a gdb_exception is caught in try/catch code in the Guile extension
+ language support, a catch for gdb_exception_forced_quit has been
+ added; this catch block will simply call quit_force(), which will
+ cause the necessary cleanups to occur followed by GDB exiting.
+
+ Bug: https://sourceware.org/bugzilla/show_bug.cgi?id=26761
+ Tested-by: Tom de Vries <tdevries@suse.de>
+ Approved-By: Pedro Alves <pedro@palves.net>
+
+2023-02-27 Kevin Buettner <kevinb@redhat.com>
+
+ Python QUIT processing updates
+ See the previous patches in this series for the motivation behind
+ these changes.
+
+ This commit contains updates to Python's QUIT handling. Ideally, we'd
+ like to throw gdb_exception_forced_quit through the extension
+ language; I made an attempt to do this for gdb_exception_quit in an
+ earlier version of this patch, but Pedro pointed out that it is
+ (almost certainly) not safe to do so.
+
+ Still, we definitely don't want to swallow the exception representing
+ a SIGTERM for GDB, nor do we want to force modules written in the
+ extension language to have to explicitly handle this case. Since the
+ idea is for GDB to cleanup and quit for this exception, we'll simply
+ call quit_force() just as if the gdb_exception_forced_quit propagation
+ had managed to make it back to the top level.
+
+ Bug: https://sourceware.org/bugzilla/show_bug.cgi?id=26761
+ Tested-by: Tom de Vries <tdevries@suse.de>
+ Approved-By: Pedro Alves <pedro@palves.net>
+
+2023-02-27 Kevin Buettner <kevinb@redhat.com>
+
+ Catch gdb_exception_error instead of gdb_exception (in many places)
+ As described in the previous commit for this series, I became
+ concerned that there might be instances in which a QUIT (due to either
+ a SIGINT or SIGTERM) might not cause execution to return to the top
+ level. In some (though very few) instances, it is okay to not
+ propagate the exception for a Ctrl-C / SIGINT, but I don't think that
+ it is ever okay to swallow the exception caused by a SIGTERM.
+ Allowing that to happen would definitely be a deviation from the
+ current behavior in which GDB exits upon receipt of a SIGTERM.
+
+ I looked at all cases where an exception handler catches a
+ gdb_exception. Handlers which did NOT need modification were those
+ which satisifed one or more of the following conditions:
+
+ 1) There is no call path to maybe_quit() in the try block. I used a
+ static analysis tool to help make this determination. In
+ instances where the tool didn't provide an answer of "yes, this
+ call path can result in maybe_quit() being called", I reviewed it
+ by hand.
+
+ 2) The catch block contains a throw for conditions that it
+ doesn't want to handle; these "not handled" conditions
+ must include the quit exception and the new "forced quit" exception.
+
+ 3) There was (also) a catch for gdb_exception_quit.
+
+ Any try/catch blocks not meeting the above conditions could
+ potentially swallow a QUIT exception.
+
+ My first thought was to add catch blocks for gdb_exception_quit and
+ then rethrow the exception. But Pedro pointed out that this can be
+ handled without adding additional code by simply catching
+ gdb_exception_error instead. That's what this patch series does.
+
+ There are some oddball cases which needed to be handled differently,
+ plus the extension languages, but those are handled in later patches.
+
+ Bug: https://sourceware.org/bugzilla/show_bug.cgi?id=26761
+ Tested-by: Tom de Vries <tdevries@suse.de>
+ Approved-by: Pedro Alves <pedro@palves.net>
+
+2023-02-27 Kevin Buettner <kevinb@redhat.com>
+
+ Handle gdb SIGTERM by throwing / catching gdb_exception_force_quit
+ When a GDB process receives the SIGTERM signal, handle_sigterm() in
+ event-top.c is called. The global variable 'sync_quit_force_run' is
+ set by this signal handler. It does some other things too, but the
+ setting of this global is the important bit for the SIGTERM part of
+ this discussion.
+
+ GDB will periodically check to see whether a Ctrl-C or SIGTERM has
+ been received. This is performed via use of the QUIT macro in
+ GDB's code. QUIT is defined to invoke maybe_quit(), which will be
+ periodically called during any lengthy operation. This is supposed to
+ ensure that the user won't have to wait too long for a Ctrl-C or
+ SIGTERM to be acted upon.
+
+ When a Ctrl-C / SIGINT is received, quit_handler() will decide whether
+ to pass the SIGINT onto the inferior or to call quit() which causes
+ gdb_exception_quit to be thrown. This exception (usually) propagates
+ to the top level. Control is then returned to the top level event
+ loop.
+
+ At the moment, SIGTERM is handled very differently. Instead of
+ throwing an exception, quit_force() is called. This does eventually
+ cause GDB to exit(), but prior to that happening, the inferiors
+ are killed or detached and other target related cleanup occurs.
+ As shown in this discussion between Pedro Alves and myself...
+
+ https://sourceware.org/pipermail/gdb-patches/2021-July/180802.html
+ https://sourceware.org/pipermail/gdb-patches/2021-July/180902.html
+ https://sourceware.org/pipermail/gdb-patches/2021-July/180903.html
+
+ ...we found that it is possible for inferior_ptid and current_thread_
+ to get out of sync. When that happens, the "current_thread_ != nullptr"
+ assertion in inferior_thread() can fail resulting in a GDB internal
+ error.
+
+ Pedro recommended that we "let the normal quit exception propagate all
+ the way to the top level, and then have the top level call quit_force
+ if sync_quit_force_run is set." However, after the v2 series for this
+ patch set, we tweaked that idea by introducing a new exception for
+ handling SIGTERM.
+
+ This commit implements the obvious part of Pedro's suggestion:
+ Instead of calling quit_force from quit(), throw_forced_quit() is now
+ called instead. This causes the new exception 'gdb_exception_forced_quit'
+ to be thrown.
+
+ At the top level, I changed catch_command_errors() and captured_main()
+ to catch gdb_exception_forced_quit and then call quit_force() from the
+ catch block. I also changed start_event_loop() to also catch
+ gdb_exception_forced_quit; while we could also call quit_force() from
+ that catch block, it's sufficient to simply rethrow the exception
+ since it'll be caught by the newly added code in captured_main().
+
+ Making these changes fixed the failure / regression that I was seeing
+ for gdb.base/gdb-sigterm.exp when run on a machine with glibc-2.34.
+ However, there are many other paths back to the top level which this
+ test case does not test. I did an audit of all of the try / catch
+ code in GDB in which calls in the try-block might (eventually) call
+ QUIT. I found many cases where gdb_exception_quit and the new
+ gdb_exception_forced_quit will be swallowed. (When using GDB, have
+ you ever hit Ctrl-C and not have it do anything; if so, it could be
+ due to a swallowed gdb_exception_quit in one of the cases I've
+ identified.) The rest of the patches in this series deal with this
+ concern.
+
+ Bug: https://sourceware.org/bugzilla/show_bug.cgi?id=26761
+ Tested-by: Tom de Vries <tdevries@suse.de>
+ Approved-by: Pedro Alves <pedro@palves.net>
+
+2023-02-27 Kevin Buettner <kevinb@redhat.com>
+
+ Introduce gdb_exception_forced_quit
+ This commit adds a new exception 'gdb_exception_forced_quit', reason
+ code 'REASON_FORCED_QUIT', return mask 'RETURN_MASK_FORCED_QUIT', and
+ a wrapper for throwing the exception, throw_forced_quit().
+
+ The addition of this exception plus supporting code will allow us to
+ recognize that a SIGTERM has been received by GDB and then propagate
+ recognition of that fact to the upper levels of GDB where it can be
+ correctly handled. At the moment, when GDB receives a SIGTERM, it
+ will attempt to exit via a series of calls from the QUIT checking
+ code. However, before it can exit, it must do various cleanups, such
+ as killing or detaching all inferiors. Should these cleanups be
+ attempted while GDB is executing very low level code, such as reading
+ target memory from within ps_xfer_memory(), it can happen that some of
+ GDB's state is out of sync with regard to the cleanup code's
+ expectations. In the case just mentioned, it's been observed that
+ inferior_ptid and the current_thread_ are not in sync; this triggers
+ an assert / internal error.
+
+ This commit only introduces the exception plus supporting machinery;
+ changes which use this new exception are in later commits in this
+ series.
+
+ Bug: https://sourceware.org/bugzilla/show_bug.cgi?id=26761
+ Tested-by: Tom de Vries <tdevries@suse.de>
+ Approved-by: Pedro Alves <pedro@palves.net>
+
+2023-02-27 Tom Tromey <tom@tromey.com>
+
+ Fix value chain use-after-free
+ Hannes filed a bug showing a crash, where a pretty-printer written in
+ Python could cause a use-after-free. He sent a patch, but I thought a
+ different approach was needed.
+
+ In a much earlier patch (see bug #12533), we changed the Python code
+ to release new values from the value chain when constructing a
+ gdb.Value. The rationale for this is that if you write a command that
+ does a lot of computations in a loop, all the values will be kept live
+ by the value chain, resulting in gdb using a large amount of memory.
+
+ However, suppose a value is passed to Python from some code in gdb
+ that needs to use the value after the call into Python. In this
+ scenario, value_to_value_object will still release the value -- and
+ because gdb code doesn't generally keep strong references to values (a
+ consequence of the ancient decision to use the value chain to avoid
+ memory management), this will result in a use-after-free.
+
+ This scenario can happen, as it turns out, when a value is passed to
+ Python for pretty-printing. Now, normally this route boxes the value
+ via value_to_value_object_no_release, avoiding the problematic release
+ from the value chain. However, if you then call Value.cast, the
+ underlying value API might return the same value, when is then
+ released from the chain.
+
+ This patch fixes the problem by changing how value boxing is done.
+ value_to_value_object no longer removes a value from the chain.
+ Instead, every spot in gdb that might construct new values uses a
+ scoped_value_mark to ensure that the requirements of bug #12533 are
+ met. And, because incoming values aren't ever released from the chain
+ (the Value.cast one comes earlier on the chain than the
+ scoped_value_mark), the bug can no longer occur. (Note that many
+ spots in the Python layer already take this approach, so not many
+ places needed to be touched.)
+
+ In the future I think we should replace the use of raw "value *" with
+ value_ref_ptr pretty much everywhere. This will ensure lifetime
+ safety throughout gdb.
+
+ The test case in this patch comes from Hannes' original patch. I only
+ made a trivial ("require") change to it. However, while this fails
+ for him, I can't make it fail on this machine; nevertheless, he tried
+ my patch and reported the bug as being fixed.
+
+ Bug: https://sourceware.org/bugzilla/show_bug.cgi?id=30044
+
+2023-02-27 Pedro Alves <pedro@palves.net>
+
+ Remove infrun_thread_thread_exit observer
+ After the previous patches, I believe this observer isn't necessary
+ anymore for anything. Remove it.
+
+ Change-Id: Idb33fb6b6f55589c8c523a92169b3ca95a23d0b9
+
+2023-02-27 Pedro Alves <pedro@palves.net>
+
+ all-stop "follow-fork parent" and selecting another thread
+ With:
+
+ - catch a fork in thread 1
+ - select thread 2
+ - set follow-fork child
+ - next
+
+ ... follow_fork notices that thread 1 had last stopped for a fork
+ which hasn't been followed yet, and because thread 1 is not the
+ current thread, GDB aborts the execution command, presenting the stop
+ in thread 1.
+
+ That makes sense, as only the forking thread (thread 1) survives in
+ the child, so better stop and let the user decide how to proceed.
+
+ However, with:
+
+ - catch a fork in thread 1
+ - select thread 2
+ - set follow-fork parent << note difference here
+ - next
+
+ ... GDB does the same: follow_fork notices that thread 1 had last
+ stopped for a fork which hasn't been followed yet, and because thread
+ 1 is not the current thread, GDB aborts the execution command,
+ presenting the stop in thread 1.
+
+ Aborting/stopping in this case doesn't make sense to me. As we're
+ following the parent, thread 2 will still continue to exist in the
+ parent. What the child does after we've followed the parent shouldn't
+ matter -- it can go on running free, be detached, etc., depending on
+ "set schedule-multiple", "set detach-on-fork", etc. That does not
+ influence the execution command that the user issued for the parent
+ thread.
+
+ So this patch changes GDB in that direction -- in follow_fork, if
+ following the parent, and we've switched threads meanwhile, switch
+ back to the unfollowed thread, follow it (stay with the parent), and
+ don't abort/stop. If we're following a fork (as opposed to vfork),
+ then switch back again to the thread that the user was trying to
+ resume. If following a vfork, however, stay with the vforking-thread
+ selected, as we will need to see a vfork_done event first, before we
+ can resume any other thread.
+
+ As I was working on this, I managed to end up calling target_resume
+ for a solo-thread resume (to collect the vfork_done event), with
+ scope_ptid pointing at the vfork parent thread, and inferior_ptid
+ pointing to the vfork child. For a solo-thread resume, the scope_ptid
+ argument to target_resume must the same as inferior_ptid. The mistake
+ was caught by the assertion in target_resume, like so:
+
+ ...
+ [infrun] resume_1: step=0, signal=GDB_SIGNAL_0, trap_expected=0, current thread [1722839.1722839.0] at 0x5555555553c3
+ [infrun] do_target_resume: resume_ptid=1722839.1722939.0, step=0, sig=GDB_SIGNAL_0
+ ../../src/gdb/target.c:2661: internal-error: target_resume: Assertion `inferior_ptid.matches (scope_ptid)' failed.
+ ...
+
+ but I think it doesn't hurt to catch such a mistake earlier, hence the
+ change in internal_resume_ptid.
+
+ Change-Id: I896705506a16d2488b1bfb4736315dd966f4e412
+
+2023-02-27 Pedro Alves <pedro@palves.net>
+
+ Make follow_fork not rely on get_last_target_status
+ Currently, if
+
+ - you're in all-stop mode,
+ - the inferior last stopped because of a fork catchpoint,
+
+ when you next resume the program, gdb checks whether it had last
+ stopped for a fork/vfork, and if so,
+
+ a) if the current thread is the one that forked, gdb follows the
+ parent/child, depending on "set follow-fork" mode.
+
+ b) if the current thread is some other thread (because you switched
+ threads meanwhile), gdb switches back to that thread, gdb follows
+ the parent/child, and stops the resumption command.
+
+ There's a problem in b), however -- if you have "set schedule-multiple
+ off", which is the default, or "set scheduler-locking on", gdb will
+ still switch back to the forking thread, even if you didn't want to
+ resume it. For example, with:
+
+ (gdb) catch fork
+ (gdb) c
+ * thread 1 stops for fork
+ (gdb) thread 2
+ (gdb) set scheduler-locking on
+ (gdb) c
+
+ gdb switches back to thread 1, and follows the fork.
+
+ Or with:
+
+ (gdb) add-inferior -exec prog
+ (gdb) inferior 2
+ (gdb) start
+ (gdb) inferior 1
+ (gdb) catch fork
+ (gdb) c
+ * thread 1.1 stops for fork
+ (gdb) inferior 2
+ (gdb) set schedule-multiple off # this is the default
+ (gdb) c
+
+ gdb switches back to thread 1.1, and follows the fork.
+
+ Another issue is that, because follow_fork relies on
+ get_last_target_status to find the thread that has a pending fork, it
+ is possible to confuse it. For example, "run" or "start" call
+ init_wait_for_inferior, which clears the last target status, so this:
+
+ (gdb) catch fork
+ (gdb) c
+ * thread 1 stops for fork
+ (gdb) add-inferior -exec prog
+ (gdb) inferior 2
+ (gdb) start
+ (gdb) set follow-fork child
+ (gdb) inferior 1
+ (gdb) n
+
+ ... does not follow to the fork child of inferior 1, because the
+ get_last_target_status call in follow_fork doesn't return a
+ TARGET_WAITKIND_FORKED. Thanks to Simon for this example.
+
+ All of the above are fixed by this patch. It changes follow_fork to
+ not look at get_last_target_status, but to instead iterate over the
+ set of threads that the user is resuming, and find the one that has a
+ pending_follow kind of fork/vfork.
+
+ gdb.base/foll-fork.exp is augmented to exercise the last "start"
+ scenario described above. The other cases will be exercised in the
+ testcase added by the following patch.
+
+ Change-Id: Ifcca77e7b2456277387f40660ef06cec2b93b97e
+
+2023-02-27 Pedro Alves <pedro@palves.net>
+
+ Improve "info program"
+ With gdb.base/catch-follow-exec.exp, we currently see:
+
+ ~~~~~~~~~~~~~~~
+ (gdb)
+ continue
+ Continuing.
+ process 693251 is executing new program: /usr/bin/ls
+ [New inferior 2]
+ [New process 693251]
+ [Switching to process 693251]
+
+ Thread 2.1 "ls" hit Catchpoint 2 (exec'd /usr/bin/ls), 0x00007ffff7fd0100 in _start () from /lib64/ld-linux-x86-64.so.2
+ (gdb)
+ info prog
+ No selected thread.
+ ~~~~~~~~~~~~~~~
+
+ Note the "No selected thread" output. That is totally bogus, because
+ there _is_ a selected thread. What GDB really means, is that it can't
+ find the thread that had the latest (user-visible) stop. And that
+ happens because "info program" gets that info from
+ get_last_target_status, and the last target status has been cleared.
+
+ However, GDB also checks if there is a selected thread, here:
+
+ if (ptid == null_ptid || ptid == minus_one_ptid)
+ error (_("No selected thread."));
+
+ .. the null_ptid part. That is also bogus, because what matters is
+ the thread that last reported a stop, not the current thread:
+
+ - in all-stop mode, "info program" displays info about the last stop.
+ That may have happened on a thread different from the selected
+ thread.
+
+ - in non-stop mode, because all threads are controlled individually,
+ "info program" shows info about the last stop of the selected
+ thread.
+
+ The current code already behaves this way, though in a poor way. This
+ patch reimplements it, such that the all-stop version now finds the
+ thread that last reported an event via the 'previous_thread' strong
+ reference. Being a strong reference means that if that thread has
+ exited since the event was reported, 'previous_thread' will still
+ point to it, so we can say that the thread exited meanwhile.
+
+ The patch also extends "info program" output a little, to let the user
+ know which thread we are printing info for. For example, for the
+ gdb.base/catch-follow-exec.exp case we shown above, we now get:
+
+ (gdb) info prog
+ Last stopped for thread 2.1 (process 710867).
+ Using the running image of child process 710867.
+ Program stopped at 0x7ffff7fd0100.
+ It stopped at breakpoint 2.
+ Type "info stack" or "info registers" for more information.
+ (gdb)
+
+ while in non-stop mode, we get:
+
+ (gdb) info prog
+ Selected thread 2.1 (process 710867).
+ Using the running image of child process 710867.
+ Program stopped at 0x7ffff7fd0100.
+ It stopped at breakpoint 2.
+ Type "info stack" or "info registers" for more information.
+ (gdb)
+
+ In both cases, the first line of output is new.
+
+ The existing code considered these running/exited cases as an error,
+ but I think that that's incorrect, since this is IMO just plain
+ execution info as well. So the patch makes those cases regular
+ prints, not errors.
+
+ If the thread is running, we get, in non-stop mode:
+
+ (gdb) info prog
+ Selected thread 2.1 (process 710867).
+ Selected thread is running.
+
+ ... and in all-stop:
+
+ (gdb) info prog
+ Last stopped for thread 2.1 (process 710867).
+ Thread is now running.
+
+ If the thread has exited, we get, in non-stop mode:
+
+ (gdb) info prog
+ Selected thread 2.1 (process 710867).
+ Selected thread has exited.
+
+ ... and in all-stop:
+
+ (gdb) info prog
+ Last stopped for thread 2.1 (process 710867).
+ Thread has since exited.
+
+ The gdb.base/info-program.exp testcase was much extended to test
+ all-stop/non-stop and single-threaded/multi-threaded.
+
+ Change-Id: I51d9d445f772d872af3eead3449ad4aa445781b1
+
+2023-02-27 Pedro Alves <pedro@palves.net>
+
+ Convert previous_inferior_ptid to strong reference to thread_info
+ I originally wrote this patch, because while working on some other
+ patch, I spotted a regression in the
+ gdb.multi/multi-target-no-resumed.exp.exp testcase. Debugging the
+ issue, I realized that the problem was related to how I was using
+ previous_inferior_ptid to look up the thread the user had last
+ selected. The problem is that previous_inferior_ptid alone doesn't
+ tell you which target that ptid is from, and I was just always using
+ the current target, which was incorrect. Two different targets may
+ have threads with the same ptid.
+
+ I decided to fix this by replacing previous_inferior_ptid with a
+ strong reference to the thread, called previous_thread.
+
+ I have since found a new motivation for this change -- I would like to
+ tweak "info program" to not rely on get_last_target_status returning a
+ ptid that still exists in the thread list. With both the follow_fork
+ changes later in this series, and the step-over-thread-exit changes,
+ that can happen, as we'll delete threads and not clear the last
+ waitstatus.
+
+ A new update_previous_thread function is added that can be used to
+ update previous_thread from inferior_ptid. This must be called in
+ several places that really want to get rid of previous_thread thread,
+ and reset the thread id counter, otherwise we get regressions like
+ these:
+
+ (gdb) info threads -gid
+ Id GId Target Id Frame
+ - * 1 1 Thread 2974541.2974541 "tids-gid-reset" main () at src/gdb/testsuite/gdb.multi/tids-gid-reset.c:21
+ - (gdb) PASS: gdb.multi/tids-gid-reset.exp: single-inferior: after restart: info threads -gid
+ + * 1 2 Thread 2958361.2958361 "tids-gid-reset" main () at src/gdb/testsuite/gdb.multi/tids-gid-reset.c:21
+ + (gdb) FAIL: gdb.multi/tids-gid-reset.exp: single-inferior: after restart: info threads -gid
+
+ and:
+
+ Core was generated by `build/gdb/testsuite/outputs/gdb.reverse/sigall-precsave/si'.
+ Program terminated with signal SIGTRAP, Trace/breakpoint trap.
+ #0 gen_ABRT () at src/gdb/testsuite/gdb.reverse/sigall-reverse.c:398
+ 398 kill (getpid (), SIGABRT);
+ +[Current thread is 1 (LWP 2662066)]
+ Restored records from core file build/gdb/testsuite/outputs/gdb.reverse/sigall-precsave/sigall.precsave.
+ #0 gen_ABRT () at src/gdb/testsuite/gdb.reverse/sigall-reverse.c:398
+ 398 kill (getpid (), SIGABRT);
+
+ continue
+ Continuing.
+
+ -Program received signal SIGABRT, Aborted.
+ +Thread 1 received signal SIGABRT, Aborted.
+ 0x00007ffff7dfd55b in kill () at ../sysdeps/unix/syscall-template.S:78
+ 78 ../sysdeps/unix/syscall-template.S: No such file or directory.
+ -(gdb) PASS: gdb.reverse/sigall-precsave.exp: sig-test-1: get signal ABRT
+ +(gdb) FAIL: gdb.reverse/sigall-precsave.exp: sig-test-1: get signal ABRT
+
+ I.e., GDB was failing to restart the thread counter back to 1, because
+ the previous_thread thread was being help due to the strong reference.
+
+ Tested on GNU/Linux native, gdbserver and gdbserver + "maint set
+ target-non-stop on".
+
+ gdb/ChangeLog:
+ yyyy-mm-dd Pedro Alves <pedro@palves.net>
+
+ * infcmd.c (kill_command, detach_command, disconnect_command):
+ Call update_previous_thread.
+ * infrun.c (previous_inferior_ptid): Delete.
+ (previous_thread): New.
+ (update_previous_thread): New.
+ (proceed, init_wait_for_inferior): Call update_previous_thread.
+ (normal_stop): Adjust to compare previous_thread and
+ inferior_thread. Call update_previous_thread.
+ * infrun.h (update_previous_thread): Declare.
+ * target.c (target_pre_inferior, target_preopen): Call
+ update_previous_thread.
+
+ Change-Id: I42779a1ee51a996fa1e8f6e1525c6605dbfd42c7
+
+2023-02-27 Pedro Alves <pedro@palves.net>
+
+ Tweak "Using the running image of ..." output
+ Currently, "info files" and "info program" on a few native targets
+ show:
+
+ (gdb) info files
+ Symbols from "/home/pedro/gdb/tests/threads".
+ Native process:
+ Using the running image of child Thread 0x7ffff7d89740 (LWP 1097968).
+ ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
+ ...
+
+ (gdb) info program
+ Using the running image of child Thread 0x7ffff7d89740 (LWP 1097968).
+ ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
+ Program stopped at 0x555555555278.
+ ...
+
+
+ This patch changes them to:
+
+ (gdb) info files
+ Symbols from "/home/pedro/gdb/tests/threads".
+ Native process:
+ Using the running image of child process 1097968.
+ ^^^^^^^^^^^^^^^
+ ...
+
+ (gdb) info program
+ Using the running image of child process 1097968.
+ ^^^^^^^^^^^^^^^
+ Program stopped at 0x555555555278.
+ ...
+
+
+ ... which I think makes a lot more sense in this context. The "info
+ program" manual entry even says:
+
+ "Display information about the status of your program: whether it is
+ running or not, what process it is, and why it stopped."
+ ^^^^^^^^^^^^^
+
+ This change affects ptrace targets, procfs targets, and Windows.
+
+ Approved-By: Simon Marchi <simon.marchi@efficios.com>
+ Change-Id: I6aab061ff494a84ba3398cf98fd49efd7a6ec1ca
+
+2023-02-27 Simon Marchi <simon.marchi@polymtl.ca>
+
+ gdb: make-target-delegates.py: add type annotations
+ Fixes all warnings given by pyright.
+
+ Change-Id: I480521bfc62960c4eccd9d32c886392b05a1ddaa
+ Reviewed-By: Tom Tromey <tom@tromey.com>
+ Reviewed-By: Andrew Burgess <aburgess@redhat.com>
+
+2023-02-27 Simon Marchi <simon.marchi@polymtl.ca>
+
+ gdb: make-target-delegates.py: add Entry type
+ Add the Entry type and use it in the `entries` map, rather than using an
+ ad-hoc str -> str map that comes from the re.match. This will make it
+ easier to make typing work in a subsequent patch, but it also helps
+ readers know what attributes exist for entries, which is not clear
+ currently.
+
+ Change-Id: I5b58dee1ed7ae85987b99bd417e641ede718624c
+ Reviewed-By: Tom Tromey <tom@tromey.com>
+ Reviewed-By: Andrew Burgess <aburgess@redhat.com>
+
+2023-02-27 Simon Marchi <simon.marchi@polymtl.ca>
+
+ gdb: make-target-delegates.py: make one string raw
+ Fixes the following flake8 warning:
+
+ make-target-delegates.py:36:39: W605 invalid escape sequence '\s'
+
+ Change-Id: I25eeb296f55765e17e5217a2d1e49018f63a3acd
+ Reviewed-By: Tom Tromey <tom@tromey.com>
+ Reviewed-By: Andrew Burgess <aburgess@redhat.com>
+
+2023-02-27 Simon Marchi <simon.marchi@polymtl.ca>
+
+ gdb: gdbarch*.py, copyright.py: add type annotations
+ Add type annotations to gdbarch*.py to fix all errors shown by pyright.
+ There is one change in copyright.py too, to fix this one:
+
+ /home/simark/src/binutils-gdb/gdb/gdbarch.py
+ /home/simark/src/binutils-gdb/gdb/gdbarch.py:206:13 - error: Type of "copyright" is partially unknown
+ Type of "copyright" is "(tool: Unknown, description: Unknown) -> str" (reportUnknownMemberType)
+
+ Change-Id: Ia109b53e267f6e2f5bd79a1288d0d5c9508c9ac4
+ Reviewed-By: Tom Tromey <tom@tromey.com>
+ Reviewed-By: Andrew Burgess <aburgess@redhat.com>
+
+2023-02-27 Simon Marchi <simon.marchi@polymtl.ca>
+
+ gdb: split gdbarch component types to gdbarch_types.py
+ Editing gdbarch-components.py is not an experience in an editor that is
+ minimally smart about Python. Because gdbarch-components.py is read and
+ exec'd by gdbarch.py, it doesn't import the Info / Method / Function /
+ Value types. And because these types are defined in gdbarch.py, it
+ can't import them, as that would make a cyclic dependency.
+
+ Solve this by introducing a third file, gdbarch_types.py, to define
+ these types. Make gdbarch.py and gdbarch-components.py import it.
+ Also, replace the read & exec of gdbarch-components.py by a regular
+ import. For this to work though, gdbarch-components.py needs to be
+ renamed to gdbarch_components.py.
+
+ Change-Id: Ibe994d56ef9efcc0698b3ca9670d4d9bf8bbb853
+ Reviewed-By: Tom Tromey <tom@tromey.com>
+ Reviewed-By: Andrew Burgess <aburgess@redhat.com>
+
+2023-02-27 Simon Marchi <simon.marchi@polymtl.ca>
+
+ gdb: pyproject.toml: set pyright typeCheckingMode = "strict"
+ While working on other projects, I found the pyright type checker very
+ helpful when editing Python code. I don't think I have to explain the
+ advantages of type checking to a crowd used to C/C++.
+
+ Setting typeCheckingMode to "strict" makes pyright flag a bit more type
+ issues than the default of "basic".
+
+ Change-Id: I38818ec59f7f73c2ab020cc9226286cdd485abc7
+ Reviewed-By: Tom Tromey <tom@tromey.com>
+ Reviewed-By: Andrew Burgess <aburgess@redhat.com>
+
+2023-02-27 Simon Marchi <simon.marchi@polymtl.ca>
+
+ gdb: gdbarch.py: remove Info.__init__
+ Info.__init__ currently assigns `self.predicate = None`. This was
+ helpful to ensure that all component types had a `predicate` attribute.
+ The generator code could then avoid having code like "if the component
+ is anything but Info, use predicate". Since the previous commit, all
+ component types have a predicate attribute which defaults to False. We
+ can therefore remove the assignment in Info.__init__, and in turn remove
+ Info.__init__. We however need to make the printer parameter of
+ _Component.__init__ optional, as Info don't need a printer.
+
+ Change-Id: I611edeca9cc9837eb49dddfe038595e1ff3b7239
+ Reviewed-By: Andrew Burgess <aburgess@redhat.com>
+
+2023-02-27 Simon Marchi <simon.marchi@polymtl.ca>
+
+ gdb: gdbarch.py: spell out parameters of _Component.__init__
+ The way _Component uses kwargs is handy to save a few characters, but it
+ doesn't play well with static analysis. When editing gdbarch.py, my
+ editor (which uses pylance under the hood) knows nothing about the
+ properties of components. So it's full of squiggly lines, and typing
+ analysis (which I find really helpful) doesn't work. I therefore think
+ it would be better to spell out the parameters.
+
+ Change-Id: Iaf561beb0d0fbe170ce1c79252a291e0945e1830
+ Reviewed-By: Tom Tromey <tom@tromey.com>
+ Reviewed-By: Andrew Burgess <aburgess@redhat.com>
+
+2023-02-27 Simon Marchi <simon.marchi@polymtl.ca>
+
+ gdb: reformat Python files with black 23.1.0
+ Change-Id: Ie8ec8870a16d71c5858f5d08958309d23c318302
+ Reviewed-By: Tom Tromey <tom@tromey.com>
+ Reviewed-By: Andrew Burgess <aburgess@redhat.com>
+
+2023-02-27 Simon Marchi <simon.marchi@efficios.com>
+
+ gdb: remove invalid / dead code from gdbarch.py
+ My editor flagged that the variable `c` (in the lines removed by this
+ patch) was unknown. I guess it ends up working because there is a `c`
+ variable in the global scope. I tried putting `assert False` inside
+ that if, and it is not hit, showing that we never enter this if. So,
+ remove it. There is no change in the generated files.
+
+ Change-Id: Id3b9f67719e88cada7c6fde673c8d7842ab13617
+ Reviewed-By: Tom Tromey <tom@tromey.com>
+ Reviewed-By: Andrew Burgess <aburgess@redhat.com>
+
+2023-02-27 Tom Tromey <tom@tromey.com>
+
+ Fix crash with "finish" in Rust
+ PR rust/30090 points out that a certain "finish" in a Rust program
+ will cause gdb to crash. This happens due to some confusion about
+ field indices in rust_language::print_enum. The fix is to use
+ value_primitive_field so that the correct type can be passed; other
+ spots in rust-lang.c already do this.
+
+ Note that the enclosed test case comes with an xfail. This is needed
+ because for this function, rustc doesn't follow the platform ABI.
+
+ Bug: https://sourceware.org/bugzilla/show_bug.cgi?id=30090
+
+2023-02-27 Tom Tromey <tom@tromey.com>
+
+ Remove old GNU indent directives
+ Now that gdb_indent.sh has been removed, I think it makes sense to
+ also remove the directives intended for GNU indent.
+
+2023-02-27 Tom Tromey <tromey@adacore.com>
+
+ Handle range types in ax-gdb.c
+ A range type can usually be treated the same as its underlying integer
+ type, at least for the purposes of agent expressions. This patch
+ arranges for range types to be handled this way in ax-gdb.c, letting a
+ somewhat larger subset of Ada expressions be compiled.
+
+2023-02-27 Tom Tromey <tromey@adacore.com>
+
+ Implement some agent expressions for Ada
+ Ada historically has not implemented agent expressions, and some Ada
+ constructs probably cannot reasonably be converted to agent
+ expressions. However, a subset of simple operations can be, and this
+ patch represents a first step in that direction.
+
+ On one internal AdaCore test case, this improves the performance of a
+ conditional breakpoint from 5 minutes to 5 seconds.
+
+ The main tricky part in this patch is ensuring the converted
+ expressions detect the cases that will not work. This is done by
+ examining the code in the corresponding evaluation methods.
+
+2023-02-27 Pedro Alves <pedro@palves.net>
+
+ Regenerate Linux syscall group info
+ This commit makes use of the new script to regenerate the Linux
+ syscall group info against strace git hash
+ e88e5e9ae6da68f22d15f9be3193b1412ac9aa02.
+
+ Like so:
+
+ $ cd gdb/syscalls/
+ $ ./update-linux-defaults.sh ~/strace.git/
+ Generating linux-defaults.xml.in
+ $ make
+ for f in aarch64-linux.xml amd64-linux.xml arm-linux.xml bfin-linux.xml \
+ i386-linux.xml mips-n32-linux.xml mips-n64-linux.xml \
+ mips-o32-linux.xml ppc64-linux.xml ppc-linux.xml s390-linux.xml \
+ s390x-linux.xml sparc64-linux.xml sparc-linux.xml; do \
+ xsltproc --output $f apply-defaults.xsl $f.in; \
+ done
+
+ The result is that a lot more syscalls end up assigned to groups.
+ Some lose their group info, but that just mirrors what strace does.
+
+ The gdb/syscalls/linux-defaults.xml.in file shows a large diff because
+ the new version is ASCII sorted, while the current version was
+ somewhat (but not consistently) sorted by "family" of syscalls.
+
+ If I sort the old file and diff against the new, the difference is
+ like this:
+
+ <syscall name="accept4" groups="network"/>
+ <syscall name="accept" groups="network"/>
+ <syscall name="access" groups="file"/>
+ <syscall name="acct" groups="file"/>
+ - <syscall name="arch_prctl" groups="process"/>
+ <syscall name="bind" groups="network"/>
+ + <syscall name="bpf" groups="descriptor"/>
+ <syscall name="break" groups="memory"/>
+ <syscall name="brk" groups="memory"/>
+ + <syscall name="bsd43_fstatfs" groups="descriptor"/>
+ + <syscall name="bsd43_fstat" groups="descriptor"/>
+ + <syscall name="bsd43_killpg" groups="process"/>
+ + <syscall name="bsd43_kill" groups="process"/>
+ + <syscall name="bsd43_lstat" groups="file"/>
+ + <syscall name="bsd43_madvise" groups="memory"/>
+ + <syscall name="bsd43_mincore" groups="memory"/>
+ + <syscall name="bsd43_mmap" groups="descriptor,memory"/>
+ + <syscall name="bsd43_mprotect" groups="memory"/>
+ + <syscall name="bsd43_mremap" groups="memory"/>
+ + <syscall name="bsd43_munmap" groups="memory"/>
+ + <syscall name="bsd43_oldfstat" groups="descriptor"/>
+ + <syscall name="bsd43_oldstat" groups="file"/>
+ + <syscall name="bsd43_quotactl" groups="file"/>
+ + <syscall name="bsd43_sbreak" groups="memory"/>
+ + <syscall name="bsd43_sbrk" groups="memory"/>
+ + <syscall name="bsd43_statfs" groups="file"/>
+ + <syscall name="bsd43_stat" groups="file"/>
+ + <syscall name="cacheflush" groups="memory"/>
+ <syscall name="chdir" groups="file"/>
+ <syscall name="chmod" groups="file"/>
+ <syscall name="chown32" groups="file"/>
+ <syscall name="chown" groups="file"/>
+ <syscall name="chroot" groups="file"/>
+ + <syscall name="clone2" groups="process"/>
+ + <syscall name="clone3" groups="process"/>
+ <syscall name="clone" groups="process"/>
+ <syscall name="close" groups="descriptor"/>
+ <syscall name="connect" groups="network"/>
+ + <syscall name="copy_file_range" groups="descriptor"/>
+ <syscall name="creat" groups="descriptor,file"/>
+ <syscall name="dup2" groups="descriptor"/>
+ <syscall name="dup3" groups="descriptor"/>
+ @@ -28,14 +52,17 @@
+ <syscall name="epoll_create1" groups="descriptor"/>
+ <syscall name="epoll_create" groups="descriptor"/>
+ <syscall name="epoll_ctl" groups="descriptor"/>
+ + <syscall name="epoll_pwait2" groups="descriptor"/>
+ <syscall name="epoll_pwait" groups="descriptor"/>
+ <syscall name="epoll_wait" groups="descriptor"/>
+ <syscall name="eventfd2" groups="descriptor"/>
+ <syscall name="eventfd" groups="descriptor"/>
+ + <syscall name="execveat" groups="descriptor,file,process"/>
+ <syscall name="execve" groups="file,process"/>
+ <syscall name="execv" groups="file,process"/>
+ <syscall name="exit_group" groups="process"/>
+ <syscall name="exit" groups="process"/>
+ + <syscall name="faccessat2" groups="descriptor,file"/>
+ <syscall name="faccessat" groups="descriptor,file"/>
+ <syscall name="fadvise64_64" groups="descriptor"/>
+ <syscall name="fadvise64" groups="descriptor"/>
+ @@ -57,7 +84,11 @@
+ <syscall name="flock" groups="descriptor"/>
+ <syscall name="fork" groups="process"/>
+ <syscall name="fremovexattr" groups="descriptor"/>
+ + <syscall name="fsconfig" groups="descriptor,file"/>
+ <syscall name="fsetxattr" groups="descriptor"/>
+ + <syscall name="fsmount" groups="descriptor"/>
+ + <syscall name="fsopen" groups="descriptor"/>
+ + <syscall name="fspick" groups="descriptor,file"/>
+ <syscall name="fstat64" groups="descriptor"/>
+ <syscall name="fstatat64" groups="descriptor,file"/>
+ <syscall name="fstatfs64" groups="descriptor"/>
+ @@ -72,16 +103,26 @@
+ <syscall name="getdents" groups="descriptor"/>
+ <syscall name="get_mempolicy" groups="memory"/>
+ <syscall name="getpeername" groups="network"/>
+ + <syscall name="getpmsg" groups="network"/>
+ <syscall name="getsockname" groups="network"/>
+ <syscall name="getsockopt" groups="network"/>
+ <syscall name="getxattr" groups="file"/>
+ - <syscall name="inotify_add_watch" groups="descriptor"/>
+ + <syscall name="inotify_add_watch" groups="descriptor,file"/>
+ <syscall name="inotify_init1" groups="descriptor"/>
+ <syscall name="inotify_init" groups="descriptor"/>
+ <syscall name="inotify_rm_watch" groups="descriptor"/>
+ <syscall name="ioctl" groups="descriptor"/>
+ + <syscall name="io_destroy" groups="memory"/>
+ + <syscall name="io_setup" groups="memory"/>
+ + <syscall name="io_uring_enter" groups="descriptor,signal"/>
+ + <syscall name="io_uring_register" groups="descriptor,memory"/>
+ + <syscall name="io_uring_setup" groups="descriptor"/>
+ <syscall name="ipc" groups="ipc"/>
+ - <syscall name="kill" groups="signal"/>
+ + <syscall name="kexec_file_load" groups="descriptor"/>
+ + <syscall name="kill" groups="signal,process"/>
+ + <syscall name="landlock_add_rule" groups="descriptor"/>
+ + <syscall name="landlock_create_ruleset" groups="descriptor"/>
+ + <syscall name="landlock_restrict_self" groups="descriptor"/>
+ <syscall name="lchown32" groups="file"/>
+ <syscall name="lchown" groups="file"/>
+ <syscall name="lgetxattr" groups="file"/>
+ @@ -98,19 +139,31 @@
+ <syscall name="lstat" groups="file"/>
+ <syscall name="madvise" groups="memory"/>
+ <syscall name="mbind" groups="memory"/>
+ + <syscall name="memfd_create" groups="descriptor"/>
+ + <syscall name="memfd_secret" groups="descriptor"/>
+ <syscall name="migrate_pages" groups="memory"/>
+ <syscall name="mincore" groups="memory"/>
+ <syscall name="mkdirat" groups="descriptor,file"/>
+ <syscall name="mkdir" groups="file"/>
+ <syscall name="mknodat" groups="descriptor,file"/>
+ <syscall name="mknod" groups="file"/>
+ + <syscall name="mlock2" groups="memory"/>
+ <syscall name="mlockall" groups="memory"/>
+ <syscall name="mlock" groups="memory"/>
+ <syscall name="mmap2" groups="descriptor,memory"/>
+ <syscall name="mmap" groups="descriptor,memory"/>
+ + <syscall name="mount_setattr" groups="descriptor,file"/>
+ <syscall name="mount" groups="file"/>
+ + <syscall name="move_mount" groups="descriptor,file"/>
+ <syscall name="move_pages" groups="memory"/>
+ <syscall name="mprotect" groups="memory"/>
+ + <syscall name="mq_getsetattr" groups="descriptor"/>
+ + <syscall name="mq_notify" groups="descriptor"/>
+ + <syscall name="mq_open" groups="descriptor"/>
+ + <syscall name="mq_timedreceive" groups="descriptor"/>
+ + <syscall name="mq_timedreceive_time64" groups="descriptor"/>
+ + <syscall name="mq_timedsend" groups="descriptor"/>
+ + <syscall name="mq_timedsend_time64" groups="descriptor"/>
+ <syscall name="mremap" groups="memory"/>
+ <syscall name="msgctl" groups="ipc"/>
+ <syscall name="msgget" groups="ipc"/>
+ @@ -126,45 +179,98 @@
+ <syscall name="oldfstat" groups="descriptor"/>
+ <syscall name="oldlstat" groups="file"/>
+ <syscall name="oldstat" groups="file"/>
+ + <syscall name="oldumount" groups="file"/>
+ + <syscall name="openat2" groups="descriptor,file"/>
+ <syscall name="openat" groups="descriptor,file"/>
+ <syscall name="open_by_handle_at" groups="descriptor"/>
+ <syscall name="open" groups="descriptor,file"/>
+ + <syscall name="open_tree" groups="descriptor,file"/>
+ + <syscall name="osf_fstatfs64" groups="descriptor"/>
+ + <syscall name="osf_fstatfs" groups="descriptor"/>
+ + <syscall name="osf_fstat" groups="descriptor"/>
+ + <syscall name="osf_lstat" groups="file"/>
+ + <syscall name="osf_mincore" groups="memory"/>
+ + <syscall name="osf_mremap" groups="memory"/>
+ + <syscall name="osf_old_fstat" groups="descriptor"/>
+ + <syscall name="osf_old_killpg" groups="process"/>
+ + <syscall name="osf_old_lstat" groups="file"/>
+ + <syscall name="osf_old_stat" groups="file"/>
+ + <syscall name="osf_sbrk" groups="memory"/>
+ + <syscall name="osf_select" groups="descriptor"/>
+ + <syscall name="osf_shmat" groups="ipc,memory"/>
+ + <syscall name="osf_sigprocmask" groups="signal"/>
+ + <syscall name="osf_statfs64" groups="file"/>
+ + <syscall name="osf_statfs" groups="file"/>
+ + <syscall name="osf_stat" groups="file"/>
+ + <syscall name="osf_utimes" groups="file"/>
+ + <syscall name="osf_wait4" groups="process"/>
+ <syscall name="pause" groups="signal"/>
+ <syscall name="perf_event_open" groups="descriptor"/>
+ + <syscall name="pidfd_getfd" groups="descriptor"/>
+ + <syscall name="pidfd_open" groups="descriptor"/>
+ + <syscall name="pidfd_send_signal" groups="descriptor,signal,process"/>
+ <syscall name="pipe2" groups="descriptor"/>
+ <syscall name="pipe" groups="descriptor"/>
+ <syscall name="pivot_root" groups="file"/>
+ + <syscall name="pkey_mprotect" groups="memory"/>
+ <syscall name="poll" groups="descriptor"/>
+ + <syscall name="posix_fstatfs" groups="descriptor"/>
+ + <syscall name="posix_fstat" groups="descriptor"/>
+ + <syscall name="posix_kill" groups="process"/>
+ + <syscall name="posix_lstat" groups="file"/>
+ + <syscall name="posix_madvise" groups="memory"/>
+ + <syscall name="posix_mmap" groups="descriptor,memory"/>
+ + <syscall name="posix_munmap" groups="memory"/>
+ + <syscall name="posix_sbreak" groups="memory"/>
+ + <syscall name="posix_SGI_madvise" groups="memory"/>
+ + <syscall name="posix_SGI_mmap" groups="descriptor,memory"/>
+ + <syscall name="posix_SGI_mprotect" groups="memory"/>
+ + <syscall name="posix_SGI_msync" groups="memory"/>
+ + <syscall name="posix_SGI_munmap" groups="memory"/>
+ + <syscall name="posix_statfs" groups="file"/>
+ + <syscall name="posix_stat" groups="file"/>
+ <syscall name="ppoll" groups="descriptor"/>
+ + <syscall name="ppoll_time64" groups="descriptor"/>
+ <syscall name="pread64" groups="descriptor"/>
+ <syscall name="pread" groups="descriptor"/>
+ + <syscall name="preadv2" groups="descriptor"/>
+ <syscall name="preadv" groups="descriptor"/>
+ + <syscall name="process_madvise" groups="descriptor"/>
+ + <syscall name="process_mrelease" groups="descriptor"/>
+ <syscall name="pselect6" groups="descriptor"/>
+ + <syscall name="pselect6_time64" groups="descriptor"/>
+ + <syscall name="putpmsg" groups="network"/>
+ <syscall name="pwrite64" groups="descriptor"/>
+ <syscall name="pwrite" groups="descriptor"/>
+ + <syscall name="pwritev2" groups="descriptor"/>
+ <syscall name="pwritev" groups="descriptor"/>
+ + <syscall name="quotactl_fd" groups="descriptor"/>
+ <syscall name="quotactl" groups="file"/>
+ <syscall name="readahead" groups="descriptor"/>
+ <syscall name="readdir" groups="descriptor"/>
+ - <syscall name="read" groups="descriptor"/>
+ <syscall name="readlinkat" groups="descriptor,file"/>
+ <syscall name="readlink" groups="file"/>
+ + <syscall name="read" groups="descriptor"/>
+ <syscall name="readv" groups="descriptor"/>
+ <syscall name="recvfrom" groups="network"/>
+ - <syscall name="recv" groups="network"/>
+ + <syscall name="recvmmsg_time64" groups="network"/>
+ <syscall name="recvmmsg" groups="network"/>
+ <syscall name="recvmsg" groups="network"/>
+ + <syscall name="recv" groups="network"/>
+ <syscall name="remap_file_pages" groups="memory"/>
+ <syscall name="removexattr" groups="file"/>
+ + <syscall name="renameat2" groups="descriptor,file"/>
+ <syscall name="renameat" groups="descriptor,file"/>
+ <syscall name="rename" groups="file"/>
+ + <syscall name="riscv_flush_icache" groups="memory"/>
+ <syscall name="rmdir" groups="file"/>
+ <syscall name="rt_sigaction" groups="signal"/>
+ <syscall name="rt_sigpending" groups="signal"/>
+ <syscall name="rt_sigprocmask" groups="signal"/>
+ - <syscall name="rt_sigqueueinfo" groups="signal"/>
+ + <syscall name="rt_sigqueueinfo" groups="signal,process"/>
+ <syscall name="rt_sigreturn" groups="signal"/>
+ <syscall name="rt_sigsuspend" groups="signal"/>
+ + <syscall name="rt_sigtimedwait_time64" groups="signal"/>
+ <syscall name="rt_sigtimedwait" groups="signal"/>
+ <syscall name="rt_tgsigqueueinfo" groups="process,signal"/>
+ <syscall name="select" groups="descriptor"/>
+ @@ -172,12 +278,14 @@
+ <syscall name="semget" groups="ipc"/>
+ <syscall name="semop" groups="ipc"/>
+ <syscall name="semtimedop" groups="ipc"/>
+ + <syscall name="semtimedop_time64" groups="ipc"/>
+ <syscall name="sendfile64" groups="descriptor,network"/>
+ <syscall name="sendfile" groups="descriptor,network"/>
+ - <syscall name="send" groups="network"/>
+ <syscall name="sendmmsg" groups="network"/>
+ <syscall name="sendmsg" groups="network"/>
+ + <syscall name="send" groups="network"/>
+ <syscall name="sendto" groups="network"/>
+ + <syscall name="set_mempolicy_home_node" groups="memory"/>
+ <syscall name="set_mempolicy" groups="memory"/>
+ <syscall name="setns" groups="descriptor"/>
+ <syscall name="setsockopt" groups="network"/>
+ @@ -198,38 +306,78 @@
+ <syscall name="sigreturn" groups="signal"/>
+ <syscall name="sigsuspend" groups="signal"/>
+ <syscall name="socketcall" groups="descriptor"/>
+ - <syscall name="socket" groups="network"/>
+ <syscall name="socketpair" groups="network"/>
+ + <syscall name="socket" groups="network"/>
+ <syscall name="splice" groups="descriptor"/>
+ <syscall name="ssetmask" groups="signal"/>
+ <syscall name="stat64" groups="file"/>
+ <syscall name="statfs64" groups="file"/>
+ <syscall name="statfs" groups="file"/>
+ <syscall name="stat" groups="file"/>
+ + <syscall name="statx" groups="descriptor,file"/>
+ + <syscall name="svr4_fstatfs" groups="descriptor"/>
+ + <syscall name="svr4_fstat" groups="descriptor"/>
+ + <syscall name="svr4_fstatvfs" groups="descriptor"/>
+ + <syscall name="svr4_fxstat" groups="descriptor"/>
+ + <syscall name="svr4_kill" groups="process"/>
+ + <syscall name="svr4_lstat" groups="file"/>
+ + <syscall name="svr4_lxstat" groups="file"/>
+ + <syscall name="svr4_mincore" groups="memory"/>
+ + <syscall name="svr4_mmap" groups="descriptor,memory"/>
+ + <syscall name="svr4_mprotect" groups="memory"/>
+ + <syscall name="svr4_munmap" groups="memory"/>
+ + <syscall name="svr4_sbreak" groups="memory"/>
+ + <syscall name="svr4_statfs" groups="file"/>
+ + <syscall name="svr4_stat" groups="file"/>
+ + <syscall name="svr4_statvfs" groups="file"/>
+ + <syscall name="svr4_xstat" groups="file"/>
+ <syscall name="swapoff" groups="file"/>
+ <syscall name="swapon" groups="file"/>
+ <syscall name="symlinkat" groups="descriptor,file"/>
+ <syscall name="symlink" groups="file"/>
+ + <syscall name="sync_file_range2" groups="descriptor"/>
+ <syscall name="sync_file_range" groups="descriptor"/>
+ <syscall name="syncfs" groups="descriptor"/>
+ + <syscall name="sysv_brk" groups="memory"/>
+ + <syscall name="sysv_fstatfs" groups="descriptor"/>
+ + <syscall name="sysv_fstat" groups="descriptor"/>
+ + <syscall name="sysv_fstatvfs" groups="descriptor"/>
+ + <syscall name="sysv_fxstat" groups="descriptor"/>
+ + <syscall name="sysv_kill" groups="process"/>
+ + <syscall name="sysv_lstat" groups="file"/>
+ + <syscall name="sysv_lxstat" groups="file"/>
+ + <syscall name="sysv_madvise" groups="memory"/>
+ + <syscall name="sysv_mmap64" groups="descriptor,memory"/>
+ + <syscall name="sysv_mmap" groups="descriptor,memory"/>
+ + <syscall name="sysv_mprotect" groups="memory"/>
+ + <syscall name="sysv_msync" groups="memory"/>
+ + <syscall name="sysv_munmap" groups="memory"/>
+ + <syscall name="sysv_quotactl" groups="file"/>
+ + <syscall name="sysv_statfs" groups="file"/>
+ + <syscall name="sysv_stat" groups="file"/>
+ + <syscall name="sysv_statvfs" groups="file"/>
+ + <syscall name="sysv_xstat" groups="file"/>
+ <syscall name="tee" groups="descriptor"/>
+ - <syscall name="tgkill" groups="signal"/>
+ + <syscall name="tgkill" groups="signal,process"/>
+ <syscall name="timerfd_create" groups="descriptor"/>
+ + <syscall name="timerfd_gettime64" groups="descriptor"/>
+ <syscall name="timerfd_gettime" groups="descriptor"/>
+ - <syscall name="timerfd" groups="descriptor"/>
+ + <syscall name="timerfd_settime64" groups="descriptor"/>
+ <syscall name="timerfd_settime" groups="descriptor"/>
+ - <syscall name="tkill" groups="signal"/>
+ + <syscall name="timerfd" groups="descriptor"/>
+ + <syscall name="tkill" groups="signal,process"/>
+ <syscall name="truncate64" groups="file"/>
+ <syscall name="truncate" groups="file"/>
+ <syscall name="umount2" groups="file"/>
+ <syscall name="umount" groups="file"/>
+ <syscall name="unlinkat" groups="descriptor,file"/>
+ <syscall name="unlink" groups="file"/>
+ - <syscall name="unshare" groups="process"/>
+ <syscall name="uselib" groups="file"/>
+ - <syscall name="utime" groups="file"/>
+ + <syscall name="userfaultfd" groups="descriptor"/>
+ <syscall name="utimensat" groups="descriptor,file"/>
+ + <syscall name="utimensat_time64" groups="descriptor,file"/>
+ <syscall name="utimes" groups="file"/>
+ + <syscall name="utime" groups="file"/>
+ <syscall name="vfork" groups="process"/>
+ <syscall name="vmsplice" groups="descriptor"/>
+ <syscall name="wait4" groups="process"/>
+
+ Change-Id: I679d59d42fb2a914bf7a99e4c558e9696e5adff1
+
+2023-02-27 Pedro Alves <pedro@palves.net>
+
+ Autogenerate gdb/syscalls/linux-defaults.xml.in (groups) from strace sources
+ I noticed that "catch syscall group:process" doesn't catch clone3,
+ while it does catch clone.
+
+ The catch syscall group information is recorded in the
+ gdb/syscalls/linux-defaults.xml.in file, which says:
+
+ <!-- The group field information was based on strace. -->
+
+ So I looked at the strace sources, to confirm that clone3 is in fact
+ recorded in the "process" group there too, and to check what other
+ syscalls might be missing groups.
+
+ After some digging, I found that strace records the group info in C
+ arrays, with entries like:
+ ...
+ [ 61] = { 4, TP, SEN(wait4), "wait4" },
+ [ 62] = { 2, TS|TP, SEN(kill), "kill" },
+ [ 63] = { 1, 0, SEN(uname), "uname" },
+ ...
+
+ You can see the current master's table for Linux x86-64 here:
+
+ https://github.com/strace/strace/blob/e88e5e9ae6da68f22d15f9be3193b1412ac9aa02/src/linux/x86_64/syscallent.h
+
+ The column with TS|TP above is what defines each syscall's groups. So
+ I wrote a script that extracts this information and generates
+ linux-defaults.xml.in.
+
+ Approved-By: Simon Marchi <simon.marchi@efficios.com>
+ Change-Id: I679d59d42fb2a914bf7a99e4c558e9696e5adff1
+
+2023-02-27 Clément Chigot <chigot@adacore.com>
+
+ gas/testsuite: adjust another test for case insensitive file systems
+ As 1fafeaac8503eea2f61c3a35f0eef183b7e7cc65, "line.s" and "Line.s" are
+ identical in case insensitive file systems. Thus, gas doesn't trigger
+ an input file switch.
+
+ gas/ChangeLog:
+
+ * testsuite/gas/elf/dwarf-5-macro.s: Change Line.s to Line2.s.
+
+2023-02-27 Andrew Burgess <aburgess@redhat.com>
+
+ gdb: don't treat empty enums as flag enums
+ In C++ it is possible to use an empty enum as a strong typedef. For
+ example, a user could write:
+
+ enum class my_type : unsigned char {};
+
+ Now my_type can be used like 'unsigned char' except the compiler will
+ not allow implicit conversion too and from the native 'unsigned char'
+ type.
+
+ This is used in the standard library for things like std::byte.
+
+ Currently, when GDB prints a value of type my_type, it looks like
+ this:
+
+ (gdb) print my_var
+ $1 = (unknown: 0x4)
+
+ Which isn't great. This gets worse when we consider something like:
+
+ std::vector<my_type> vec;
+
+ When using a pretty-printer, this could look like this:
+
+ std::vector of length 2, capacity 2 = {(unknown: 0x2), (unknown: 0x4)}
+
+ Clearly not great. This is described in PR gdb/30148.
+
+ The problem here is in dwarf2/read.c, we assume all enums are flag
+ enums unless we find an enumerator with a non-flag like value.
+ Clearly an empty enum contains no non-flag values, so we assume the
+ enum is a flag enum.
+
+ I propose adding an extra check here; that is, an empty enum should
+ never be a flag enum.
+
+ With this the above cases look more like:
+
+ (gdb) print my_var
+ $1 = 4
+
+ and:
+
+ std::vector of length 2, capacity 2 = {2, 4}
+
+ Which look much better.
+
+ Bug: https://sourceware.org/bugzilla/show_bug.cgi?id=30148
+
+ Reviewed-By: Tom Tromey <tom@tromey.com>
+
+2023-02-27 Benson Muite <benson_muite@emailplus.org>
+
+ Do not change the timestamp when updating the gas asconfig file.
+ PR 28909 * doc/local.mk (asconfig.texi): Use "cp -p" to preserve timestamps. * Makefile.in: Regenerate.
+
+2023-02-27 Felix Willgerodt <felix.willgerodt@intel.com>
+
+ Fix missing "Core was generated by" when loading a x32 corefile.
+
+2023-02-27 Nick Clifton <nickc@redhat.com>
+
+ Updated Serbian translations for gold, gprof and opcodes sub-directories
+
+2023-02-27 Bruno Larsen <blarsen@redhat.com>
+
+ gdb/testsuite: Improve testing of GDB's completion functions
+ When looking at some failures of gdb.linespec/cp-completion-aliases.exp,
+ I noticed that when a completion test will fail, it always fails with a
+ timeout. This is because most completion tests use gdb_test_multiple
+ and only add a check for the correct output. This commit adds new
+ options for both, tab and command completion.
+
+ For command completion, the new option will check if the prompt was
+ printed, and fail in this case. This is enough to know that the test has
+ failed because the check comes after the PASS path. For tab completion,
+ we have to check if GDB outputted more than just the input line, because
+ sometimes GDB would have printed a partial line before finishing with
+ the correct completion.
+
+ Approved-By: Tom Tromey <tom@tromey.com>
+
+2023-02-27 Tankut Baris Aktemur <tankut.baris.aktemur@intel.com>
+
+ gdb, python: do minor modernization in execute_gdb_command
+ Use nullptr instead of NULL and boolify two local variables in
+ execute_gdb_command.
+
+ Approved-By: Tom Tromey <tom@tromey.com>
+
+2023-02-27 GDB Administrator <gdbadmin@sourceware.org>
+
+ Automatic date update in version.in
+
+2023-02-26 Tom Tromey <tom@tromey.com>
+
+ Remove expand_symtab_containing_pc
+ The function expand_symtab_containing_pc is unused; remove it.
+ Tested by rebuilding.
+
+2023-02-26 GDB Administrator <gdbadmin@sourceware.org>
+
+ Automatic date update in version.in
+
+2023-02-25 Andrew Burgess <aburgess@redhat.com>
+
+ gdb/amd64: replace xmalloc/alloca with gdb::byte_vector
+ Replace a couple of uses of xmalloc and alloc with a gdb::byte_vector
+ local variable instead.
+
+ There should be no user visible changes after this commit.
+
+ Reviewed-By: Tom Tromey <tom@tromey.com>
+
+2023-02-25 Andrew Burgess <aburgess@redhat.com>
+
+ opcodes/m68k: enable libopcodes styling for GDB
+ The following commit added libopcodes styling for m68k:
+
+ commit c22ff449275c91e4842bb10c650e83c572580f65
+ Date: Tue Feb 14 18:07:19 2023 +0100
+
+ opcodes: style m68k disassembler output
+
+ but didn't set disassemble_info::created_styled_output in
+ disassemble.c, which is needed in order for GDB to start using the
+ libopcodes based styling.
+
+ This commit fixes this small oversight. GDB now styles correctly.
+
+2023-02-25 GDB Administrator <gdbadmin@sourceware.org>
+
+ Automatic date update in version.in
+
+2023-02-24 Khem Raj <raj.khem@gmail.com>
+
+ gdbserver/linux-low.cc: Fix a typo in ternary operator
+
+2023-02-24 Tom Tromey <tom@tromey.com>
+
+ Remove struct buffer
+ I've long wanted to remove 'struct buffer', and thanks to Simon's
+ earlier patch, I was finally able to do so. My feeling has been that
+ gdb already has several decent structures available for growing
+ strings: std::string of course, but also obstack and even objalloc
+ from BFD and dyn-string from libiberty. The previous patches in this
+ series removed all the uses of struct buffer, so this one can remove
+ the code and the remaining #includes.
+
+ Don't use struct buffer in top.c
+ This changes top.c to use std::string rather than struct buffer. Like
+ the event-top.c change, this is not completely ideal in that it
+ requires a copy of the string.
+
+ Don't use struct buffer in event-top.c
+ This changes event-top.c to use std::string rather than struct buffer.
+ This isn't completely ideal, in that it requires a copy of the string
+ to be made.
+
+ Don't use struct buffer in handle_qxfer_threads
+ This changes handle_qxfer_threads, in gdbserver, to use std::string
+ rather than struct buffer.
+
+ Don't use struct buffer in handle_qxfer_btrace
+ This changes handle_qxfer_btrace and handle_qxfer_btrace_conf, in
+ gdbserver, to use std::string rather than struct buffer.
+
+ Don't use struct buffer in handle_qxfer_traceframe_info
+ This changes handle_qxfer_traceframe_info, in gdbserver, to use
+ std::string rather than struct buffer.
+
+ Remove struct buffer from tracefile-tfile.c
+ This changes tracefile-tfile.c to use std::string rather than struct
+ buffer.
+
+2023-02-24 Tom Tromey <tromey@adacore.com>
+
+ Write the DWARF index in the background
+ The new DWARF cooked indexer interacts poorly with the DWARF index
+ cache. In particular, the cache will require gdb to wait for the
+ cooked index to be finalized. As this happens in the foreground, it
+ means that users with this setting enabled will see a slowdown.
+
+ This patch changes gdb to write the cache entry a worker thread. (As
+ usual, in the absence of threads, this work is simply done immediately
+ in the main thread.)
+
+ Some care is taken to ensure that this can't crash, and that gdb will
+ not exit before the task is complete.
+
+ To avoid use-after-free problems, the DWARF per-BFD object explicitly
+ waits for the index cache task to complete.
+
+ To avoid gdb exiting early, an exit observer is used to wait for all
+ such pending tasks.
+
+ In normal use, neither of these waits will be very visible. For users
+ using "-batch" to pre-generate the index, though, it would be.
+ However I don't think there is much to be done about this, as it was
+ the status quo ante.
+
+2023-02-24 Tom Tromey <tromey@adacore.com>
+
+ Only use the per-BFD object to write a DWARF index
+ The DWARF index does not need access to the objfile or per-objfile
+ objects when writing -- it's entirely based on the objfile-independent
+ per-BFD data.
+
+ This patch implements this idea by changing the entire API to only be
+ passed the per-BFD object. This simplifies some lifetime reasoning
+ for the next patch.
+
+ This patch removes some code that ensures that the BFD came from a
+ file. It seems to me that checking for the existence of a build-id is
+ good enough for the index cache.
+
+2023-02-24 Simon Marchi <simon.marchi@polymtl.ca>
+
+ gdb: fix parenthesis position in comment
+ Change-Id: I535b597ab4482378910570d8dd69c090419941eb
+
+2023-02-24 Clément Chigot <chigot@adacore.com>
+
+ testsuite: prune DOS drive letter in test outputs
+ On DOS systems, absolute paths start with the drive letter. This can
+ trigger failures in the regexp from dump tests, especially for those
+ checking for warnings or errors. They are usually skipping everything
+ before the first ":" as it has to be the file path.
+ | [^:]*: warning: ...
+
+ In order to avoid modifying many regexps to allow such drive letters,
+ prune them from all the outputs if they are found at the beginning of
+ a line.
+
+ binutils/ChangeLog:
+
+ * testsuite/lib/binutils-common.exp (prune_dump_output): New
+ (run_dump_test): Use it.
+
+ ld/ChangeLog:
+
+ * testsuite/ld-elf/noinit-sections-2.l: Remove DOS drive letter
+ handler.
+
+2023-02-24 Jan Beulich <jbeulich@suse.com>
+
+ x86: allow to request ModR/M encoding
+ Several insns have a (typically shorter) non-ModR/M and a (typically
+ longer) ModR/M encoding. In most cases the former is used by default.
+ This isn't too dissimilar from register-only insns sometimes having two
+ encoding forms. In those cases {load} or {store} can be used to control
+ the encoding used. Extend this to ModR/M-less encodings which have a
+ ModR/M counterpart (note that BSWAP hasn't). For insn reading and
+ writing their (explicit) memory operand, both prefixes are honored;
+ otherwise only the applicable one is.
+
+ Note that for some forms of XCHG, {store} has already been performing
+ this function, apparently as an unnoticed side effect of adding D to
+ the template.
+
+2023-02-24 Jan Beulich <jbeulich@suse.com>
+
+ x86: MONITOR/MWAIT are not SSE3 insns
+ These have their own CPUID bit and hence they should also have their own
+ separate control.
+
+2023-02-24 Jan Beulich <jbeulich@suse.com>
+
+ x86-64: don't permit LAHF/SAHF with "generic64"
+ The feature isn't universally available on 64-bit CPUs.
+
+ Note that in i386-gen.c:isa_dependencies[] I'm only adding it to models
+ where I'm certain the functionality exists. For Nocona and Core I'm
+ uncertain in particular.
+
+2023-02-24 Jan Beulich <jbeulich@suse.com>
+
+ x86: have insns acting on segment selector values allow for consistent operands
+ While MOV to/from segment register as well as selector storing insns
+ already permit 32- and 64-bit GPR operands, selector loading insns and
+ ARPL do not. Split templates accordingly.
+
+2023-02-24 Jan Beulich <jbeulich@suse.com>
+
+ x86: restrict insn templates accepting negative 8-bit immediates
+ For shifts (but not ordinary rotates) and other cases where an immediate
+ describes e.g. a bit count or position, allowing negative operands is at
+ best confusing. An extreme example would be the two rotate-through-carry
+ insns, where a negative value would _not_ mean rotating the
+ corresponding number of bits in the other direction. To refuse such,
+ give meaning to the combination of Imm8 and Imm8S in templates (so far
+ these weren't used together anywhere). The issue was with
+ smallest_imm_type() blindly setting .imm8 for signed numbers determined
+ to fit in a byte.
+
+ VPROT{B,W,D,Q} is a little special: The rotate count there is a signed
+ quantity, so Imm8 is replaced by Imm8S. Adjust affected testcases
+ accordingly as well.
+
+ Another small adjustment to the testsuite is necessary: AAM and AAD were
+ never sensible to use with 0xffffff90 operands. This should have been an
+ error.
+
+2023-02-24 Tom de Vries <tdevries@suse.de>
+
+ [gdb/testsuite] Cleanup unnecessary expr from require line
+ In a recent commit I've added:
+ ...
+ require {expr [have_compile_flag -fsplit-stack]}
+ ...
+ but actually the expr bit is unnecessary, and we can just use:
+ ...
+ require {have_compile_flag -fsplit-stack}
+ ...
+
+ Reported-By: Tom Tromey <tom@tromey.com>
+
+2023-02-24 Maciej W. Rozycki <macro@embecosm.com>
+
+ GDB: Fix out of bounds accesses with limited-length values
+ Fix accesses to limited-length values in `contents_copy_raw' and
+ `contents_copy_raw_bitwise' so that they observe the limit of the
+ original allocation.
+
+ Reported by Simon Marchi as a heap-buffer-overflow AddressSanitizer
+ issue triggered with gdb.ada/limited-length.exp.
+
+ Approved-By: Simon Marchi <simon.marchi@efficios.com>
+
+2023-02-24 Nick Clifton <nickc@redhat.com>
+
+ Enhance better_fit() function to prefer function symbols over non-function symbols.
+
+2023-02-24 Alan Modra <amodra@gmail.com>
+
+ PR30155, ld segfault in _bfd_nearby_section
+ The segfault was a symptom of messing with the absolute section next
+ field, confusing bfd_section_removed_from_list in linker.c:fix_syms.
+ That's not all that was going wrong. The INSERT list of output
+ sections was being inserted into itself, ie. lost from the main
+ list of linker statements.
+
+ PR 30155
+ * ldlang.c (process_insert_statements): Handle pathological
+ case of the insert script being inserted before the first
+ output section statement in the default script.
+ (output_prev_sec_find): Don't test section owner here.
+ (insert_os_after): Change parameter to a list union pointer.
+ (lang_insert_orphan): Test section owner here and adjust
+ insert_os_after call.
+
+2023-02-24 Fangrui Song <i@maskray.me>
+
+ RISC-V: Add --[no-]relax-gp to ld
+ --relax enables all relaxations. --no-relax-gp disables GP relaxation to
+ allow measuring its effect.
+
+ The option can test effectiveness of GP relaxation and support some ABI
+ variants that use GP for other purposes.
+
+ Link: https://github.com/riscv-non-isa/riscv-elf-psabi-doc/issues/298
+
+ bfd/
+ * elfnn-riscv.c (struct riscv_elf_link_hash_table): Add params.
+ (riscv_elfNN_set_options): New.
+ (riscv_info_to_howto_rela): Check relax_gp.
+ (_bfd_riscv_relax_section): Likewise.
+ * elfxx-riscv.h (struct riscv_elf_params): New.
+ (riscv_elf32_set_options): New.
+ (riscv_elf64_set_options): New.
+ ld/
+ * emultempl/riscvelf.em: Add option parsing.
+ * testsuite/ld-riscv-elf/code-model-relax-medlow-01-norelaxgp.d: New.
+ * testsuite/ld-riscv-elf/pcgp-relax-01-norelaxgp.d: New.
+ * testsuite/ld-riscv-elf/pcgp-relax-02.d: Test --relax --relax-gp can be
+ used together.
+
+2023-02-24 GDB Administrator <gdbadmin@sourceware.org>
+
+ Automatic date update in version.in
+
+2023-02-23 Palmer Dabbelt <palmer@rivosinc.com>
+
+ gdb/doc: The RISC-V vector registers didn't change
+ When we merged the GDB vector register support we did it a bit early,
+ just eating the risk in the very unlikely case that the vector register
+ names changed. They didn't, so we can now remove the caveat in the docs
+ that they might.
+
+2023-02-23 Simon Marchi <simon.marchi@efficios.com>
+
+ gdb: remove --disable-gdbmi configure option
+ I noticed that the --disable-gdbmi option was broken for almost a year
+ (since 740b42ceb7c "gdb/python/mi: create MI commands using python").
+
+ The problem today is the python/py-cmd.c file. It is included in the
+ build if Python support is enabled, and it calls into some MI functions
+ (e.g. insert_mi_cmd_entry). If MI support is disabled, we get some
+ undefined symbols like:
+
+ mold: error: undefined symbol: insert_mi_cmd_entry(std::unique_ptr<mi_command, std::default_delete<mi_command> >)
+ >>> referenced by py-micmd.c
+ >>> python/py-micmd.o:(micmdpy_install_command(micmdpy_object*))
+
+ The python/py-cmd.c file should be included in the build if both Python
+ and MI support are enabled. It is not a case we support today, but it
+ could be done with a bit more configure code. However, I think we
+ should just remove the --disable-gdbmi option, and just include MI
+ support unconditionally.
+
+ Tom Tromey proposed a while ago to remove this option, but it ended
+ staying:
+
+ https://inbox.sourceware.org/gdb-patches/20180628172132.28843-1-tom@tromey.com/
+
+ However, there was no strong opposition to remove it. The argument was
+ just "bah, it doesn't hurt anybody".
+
+ But given today's case, I would rather remove complexity rather than add
+ some. I couldn't find anybody caring deeply for that option, and it's
+ not like MI adds any external dependency. It's just a bit more code.
+
+ Removing the option will not break anybody using --disable-gdbmi (it can
+ be found in many build scripts [1]), since we don't flag invalid
+ configure flags.
+
+ So, remove the option from configure.ac, and adjust Makefile.in
+ accordingly to always include the MI objects in the build.
+
+ [1] https://github.com/search?q=%22--disable-gdbmi%22&type=code
+
+ Change-Id: Ifcaa8c9fc4abc6fa686ed5fd984598644f745240
+ Approved-By: Tom Tromey <tom@tromey.com>
+
+2023-02-23 Tom Tromey <tromey@adacore.com>
+
+ Fix Tcl quoting in gdb_assert
+ The gdb_assert proc under-quotes the expression that is passed in.
+ This leads to weird code in a couple of spots that tries to
+ compensate:
+
+ gdb_assert {{$all_regs eq $completed_regs}} ...
+
+ The fix is to add a bit of quoting when evaluating the expression.
+
+2023-02-23 Nick Clifton <nickc@redhat.com>
+
+ Fix _bfd_elf_find_function so that it can cope with overlapping symbols
+
+2023-02-23 Simon Marchi <simon.marchi@efficios.com>
+
+ gdb: add AMDGPU header files to HFILES_NO_SRCDIR
+ Commit 18b4d0736bc5 ("gdb: initial support for ROCm platform (AMDGPU)
+ debugging") missed adding these header files to the HFILES_NO_SRCDIR
+ list in the Makefile. Fix that now.
+
+ Change-Id: Ifd387096aef3d147b51aefa2037da5bf6373ea64
+
+2023-02-23 Tom Tromey <tromey@adacore.com>
+
+ Remove 'eval' from gdb_breakpoint
+ Now that Tcl has the {*} operator, we can remove the use of eval from
+ gdb_breakpoint. Tested on x86-64 Fedora 36.
+
+2023-02-23 Hui Li <lihui@loongson.cn>
+
+ gdb: LoongArch: Support reg aliases in info reg command
+ According to LoongArch ELF ABI specification [1], support the register
+ aliases in "info register" command.
+
+ Without this patch:
+ ```
+ (gdb) info reg a0
+ Invalid register `a0'
+
+ ```
+ With this patch:
+
+ ```
+ (gdb) info reg a0
+
+ a0 0x1 1
+
+ ```
+ [1] https://loongson.github.io/LoongArch-Documentation/LoongArch-ELF-ABI-EN.html#_register_convention
+
+2023-02-23 Hui Li <lihui@loongson.cn>
+
+ gdb: LoongArch: Modify the result of the info reg command
+ The "info register" command should only display general registers,
+ but it shows the information of all registers in the current code,
+ add loongarch_register_reggroup_p() so that we can get the expected
+ result.
+
+2023-02-23 Alexey Lapshin <alexey.lapshin@espressif.com>
+
+ bfd: xtensa: fix __stop_SECTION literal drop
+
+2023-02-23 Nick Clifton <nickc@redhat.com>
+
+ Fix the BFD library's find_nearest_line feature to produce consistent results.
+ PR 30150
+ * dwarf2.c (comp_unit_contains_address): Renamed to ... (comp_unit_may_contain_address): this,
+ and added code to return true if the CU's ranges have not yet been computed.
+ (_bfd_dwarf2_find_nearest_line_with_alt): Use the renamed function, simplifying code in the process.
+
+2023-02-23 Alan Modra <amodra@gmail.com>
+
+ dwarf1 .line SEC_HAS_CONTENTS
+ * dwarf1.c (parse_line_table): Ignore .line without SEC_HAS_CONTENTS.
+ Formatting.
+
+2023-02-23 Alan Modra <amodra@gmail.com>
+
+ ip2k: don't look at stab sections without relocs
+ No need to read contents if we won't do anything.
+
+ * elf32-ip2k.c (adjust_all_relocations): Skip stab sections
+ without relocs.
+
+2023-02-23 Alan Modra <amodra@gmail.com>
+
+ Test SEC_HAS_CONTENTS in relax routines
+ More places that generally expect instructions, so not zeros.
+
+ * coff-sh.c (sh_relax_section, sh_relax_delete_bytes): Exclude
+ sections without SEC_HAS_CONTENTS set.
+ * elf-m10200.c (mn10200_elf_relax_section): Likewise.
+ * elf32-arc.c (arc_elf_relax_section): Likewise.
+ * elf32-avr.c (elf32_avr_relax_section): Likewise.
+ * elf32-cr16.c (elf32_cr16_relax_section): Likewise.
+ * elf32-crx.c (elf32_crx_relax_section): Likewise.
+ * elf32-epiphany.c (epiphany_elf_relax_section): Likewise.
+ * elf32-ft32.c (ft32_elf_relax_section): Likewise.
+ * elf32-h8300.c (elf32_h8_relax_section): Likewise.
+ * elf32-ip2k.c (ip2k_elf_relax_section): Likewise.
+ * elf32-m32c.c (m32c_elf_relax_section): Likewise.
+ * elf32-m68hc11.c (m68hc11_elf_relax_section): Likewise.
+ * elf32-msp430.c (msp430_elf_relax_section): Likewise.
+ * elf32-pru.c (pru_elf32_relax_section): Likewise.
+ * elf32-rl78.c (rl78_elf_relax_section): Likewise.
+ * elf32-rx.c (elf32_rx_relax_section): Likewise.
+ * elf32-sh.c (sh_elf_relax_section): Likewise.
+ (sh_elf_relax_delete_bytes): Likewise.
+ * elf32-v850.c (v850_elf_relax_section): Likewise.
+ * elf64-alpha.c (elf64_alpha_relax_section): Likewise.
+ * elf64-ia64-vms.c (elf64_ia64_relax_section): Likewise.
+ * elfnn-ia64.c (elfNN_ia64_relax_section): Likewise.
+ * elfnn-riscv.c (_bfd_riscv_relax_section): Likewise.
+ * elfxx-mips.c (_bfd_mips_elf_relax_section): Likewise.
+
+2023-02-23 Alan Modra <amodra@gmail.com>
+
+ Test SEC_HAS_CONTENTS before reading section contents
+ bfd_malloc_and_get_section does size sanity checking before allocating
+ memory and reading contents. These size checks are not done for bss
+ style sections, because they typically don't occupy file space and
+ thus can't be compared against file size. However, if you are
+ expecting to look at something other than a whole lot of zeros, don't
+ allow fuzzers to avoid the size checking.
+
+ * cofflink.c (process_embedded_commands): Don't look at
+ sections without SEC_HAS_CONTENTS set.
+ * cpu-arm.c (bfd_arm_update_notes): Likewise.
+ (bfd_arm_get_mach_from_notes): Likewise.
+ * elf-eh-frame.c (_bfd_elf_parse_eh_frame): Likewise.
+ * elf-hppa.h (elf_hppa_sort_unwind): Likewise.
+ * elf-m10300.c (mn10300_elf_relax_section): Likewise.
+ * elf-sframe.c (_bfd_elf_parse_sframe): Likewise.
+ * elf.c (_bfd_elf_print_private_bfd_data): Likewise.
+ * elf32-arm.c (bfd_elf32_arm_process_before_allocation): Likewise.
+ * elf32-avr.c (avr_elf32_load_property_records): Likewise.
+ * elf32-ppc.c (_bfd_elf_ppc_set_arch): Likewise.
+ (ppc_elf_get_synthetic_symtab, ppc_elf_relax_section): Likewise.
+ * elf64-ppc.c (ppc64_elf_get_synthetic_symtab): Likewise.
+ (opd_entry_value, ppc64_elf_edit_opd, ppc64_elf_edit_toc): Likewise.
+ * elf64-x86-64.c (elf_x86_64_get_synthetic_symtab): Likewise.
+ * elflink.c (elf_link_add_object_symbols): Likewise.
+ (bfd_elf_get_bfd_needed_list): Likewise.
+ * elfnn-aarch64.c (get_plt_type): Likewise.
+ * elfxx-mips.c (_bfd_mips_elf_get_synthetic_symtab): Likewise.
+ * linker.c (_bfd_handle_already_linked): Likewise.
+ * opncls.c (bfd_get_debug_link_info_1): Likewise.
+ (bfd_get_alt_debug_link_info, get_build_id): Likewise.
+ * peXXigen.c (pe_print_idata, pe_print_pdata): Likewise.
+ (_bfd_XX_print_ce_compressed_pdata, pe_print_reloc): Likewise.
+ * pei-x86_64.c (pex64_bfd_print_pdata_section): Likewise.
+ * stabs.c (_bfd_link_section_stabs): Likewise.
+ (_bfd_discard_section_stabs): Likewise.
+ * xcofflink.c (_bfd_xcoff_get_dynamic_symtab_upper_bound): Likewise.
+ (_bfd_xcoff_canonicalize_dynamic_symtab): Likewise.
+ (_bfd_xcoff_get_dynamic_reloc_upper_bound): Likewise.
+ (_bfd_xcoff_canonicalize_dynamic_reloc): Likewise.
+ (xcoff_link_add_dynamic_symbols): Likewise.
+ (xcoff_link_check_dynamic_ar_symbols): Likewise.
+ (bfd_xcoff_build_dynamic_sections): Likewise.
+
+2023-02-23 GDB Administrator <gdbadmin@sourceware.org>
+
+ Automatic date update in version.in
+
+2023-02-22 Pedro Alves <pedro@palves.net>
+
+ gdb.reverse/time-reverse.exp: test both time syscall and C time function
+ Instead of only testing this on systems that have a SYS_time syscall,
+ test it everywhere using the time(2) C function, and in addition, run
+ the tests again using the SYS_time syscall.
+
+ The C variant ensures that if some platform uses some syscall we are
+ not aware of yet, we'll still exercise it, and likely fail, at which
+ point we should teach GDB about the syscall.
+
+ The explicit syscall variant is useful on platforms where the C
+ function does not call a syscall at all by default, e.g., on some
+ systems the C time function wraps an implementation provided by the
+ vDSO.
+
+ Approved-By: Tom de Vries <tdevries@suse.de>
+ Change-Id: Id4b755d76577d02c46b8acbfa249d9c31b587633
+
+2023-02-22 Jan Beulich <jbeulich@suse.com>
+
+ x86-64: LAR and LSL don't need REX.W
+ Just like we suppress emitting REX.W for e.g. MOV from/to segment
+ register, there's also no need for it for LAR and LSL - these can only
+ ever return 32-bit values and hence always zero-extend their results
+ anyway.
+
+ While there also drop the redundant Word from the first operand of
+ the second template each - this is already implied by Reg16.
+
+2023-02-22 Jan Beulich <jbeulich@suse.com>
+
+ x86: optimize BT{,C,R,S} $imm,%reg
+ In 64-bit mode BT can have REX.W or a data size prefix dropped in
+ certain cases. Outside of 64-bit mode all 4 insns can have the data
+ size prefix dropped in certain cases.
+
+2023-02-22 Alan Modra <amodra@gmail.com>
+
+ set bfd_error on make_tempname or make_tempdir failure
+ * bucomm.c (make_tempname, make_tempdir): Set bfd_error on error.
+
+2023-02-22 GDB Administrator <gdbadmin@sourceware.org>
+
+ Automatic date update in version.in
+
+2023-02-21 Alan Modra <amodra@gmail.com>
+
+ Re: objdump read_section_stabs
+ Also fix ubsan "applying zero offset to null pointer".
+
+ * objdump.c (print_section_stabs): Avoid ubsan warning.
+
+2023-02-21 Alan Modra <amodra@gmail.com>
+
+ Re: objdump read_section_stabs
+ Commit f9c36cc99518 changed (and renamed) read_section_stabs with one
+ difference in overall behaviour. Previously read_section_stabs would
+ return a NULL for an empty section, which was then treated the same as
+ a missing section. Now an empty section is recognized and dumped.
+ This leads to NULL stabp and stabs_end in print_section_stabs. Since
+ stabs_end - STABSIZE is then a pointer to a very large address, the
+ test "stabp < stabs_end - STABSIZE" succeeds.
+
+ * objdump.c (print_section_stabs): Correct STABSIZE comparison.
+
+2023-02-21 Alan Modra <amodra@gmail.com>
+
+ debug_link duplicate file size checks
+ bfd_malloc_and_get_section does these checks.
+
+ * opncls.c (bfd_get_debug_link_info_1): Don't check section
+ size against file size.
+ (bfd_get_alt_debug_link_info): Likewise.
+
+2023-02-21 Tom Tromey <tom@tromey.com>
+
+ Issue error on erroneous expression
+ A while back I discovered that this does not issue an error:
+
+ (gdb) p $x = (void * ) 57
+ $3 = (void *) 0x39
+ (gdb) p $x + 7 = 3
+ $6 = (void *) 0x3
+
+ This patch fixes the bug.
+ Regression tested on x86-64 Fedora 36.
+
+ Reviewed-By: Bruno Larsen <blarsen@redhat.com>
+ Bug: https://sourceware.org/bugzilla/show_bug.cgi?id=19312
+
+2023-02-21 Philippe Blain <levraiphilippeblain@gmail.com>
+
+ gdb: add --with-curses to --configuration output
+ 'gdb --configuration' does not mention if GDB was built with curses.
+ Since b5075fb68d4 (Rename to allow_tui_tests, 2023-01-08) it does show
+ --enable-tui (or --disable-tui), but one might want to know if GDB was
+ built with curses independently of the availability of the TUI.
+
+ Since configure.ac uses AC_SEARCH_LIBS to check for the curses library,
+ we do not get an automatically defined HAVE_LIBCURSES symbol in
+ config.in. We do have symbols defined by AC_CHECK_HEADERS
+ (HAVE_CURSES_H, etc.) but it would be cumbersome to use those in
+ print_gdb_configuration because we would have to check for all 6 symbols
+ corresponding the 6 headers listed. This would also increase the
+ maintenance burden if support for other variations of curses are added.
+
+ Instead, define 'HAVE_LIBCURSES' ourselves by adding an
+ 'action-if-found' argument to AC_SEARCH_LIBS, and use it in
+ print_gdb_configuration.
+
+ While at it, remove the condition on 'ac_cv_search_waddstr' and set
+ 'curses_found' directly in 'action-if-found'.
+
+ Change-Id: Id90e3d73990e169cee51bcc3e1d52072cfacd5b8
+ Approved-By: Simon Marchi <simon.marchi@efficios.com>
+
+2023-02-21 Tom de Vries <tdevries@suse.de>
+
+ [gdb/testsuite] Require compilation flags in two gdb.arch/aarch64 test-cases
+ With test-cases gdb.arch/aarch64-mte-core.exp and gdb.arch/aarch64-pauth.exp I
+ run into compilation errors due to unsupported compilation flags.
+
+ Fix this by requiring the compilation flags, such that I have instead:
+ ...
+ UNSUPPORTED: gdb.arch/aarch64-mte-core.exp: require failed: \
+ have_compile_flag -march=armv8.5-a+memtag
+ UNSUPPORTED: gdb.arch/aarch64-pauth.exp: require failed: \
+ have_compile_flag -mbranch-protection=pac-ret+leaf
+ ...
+
+ Tested on aarch64-linux.
+
+2023-02-21 Tom de Vries <tdevries@suse.de>
+
+ [gdb/testsuite] Require istarget x86* in gdb.reverse/step-indirect-call-thunk.exp
+ On aarch64-linux, I run into:
+ ...
+ Running gdb.reverse/step-indirect-call-thunk.exp ...
+ gdb compile failed, gcc: error: unrecognized command line option \
+ '-mindirect-branch=thunk'; did you mean '-findirect-inlining'?
+ gcc: error: unrecognized command line option '-mfunction-return=thunk'; \
+ did you mean '-Wfunction-elimination'?
+ UNTESTED: gdb.reverse/step-indirect-call-thunk.exp: failed to prepare
+ ...
+
+ Fix this by requiring istarget "x86*", similar to what was added in
+ gdb.base/step-indirect-call-thunk.exp by commit 43127ae5714 ("Fix
+ gdb.base/step-indirect-call-thunk.exp"), such that we have instead:
+ ...
+ UNSUPPORTED: gdb.reverse/step-indirect-call-thunk.exp: require failed: \
+ istarget "x86*
+ ...
+
+ Tested on x86_64-linux and aarch64-linux.
+
+2023-02-21 Tom de Vries <tdevries@suse.de>
+
+ [gdb/testsuite] Require -fsplit-stack in gdb.base/morestack.exp
+ On aarch64-linux, I run into:
+ ...
+ gdb compile failed, cc1: error: '-fsplit-stack' is not supported by this \
+ compiler configuration
+ UNTESTED: gdb.base/morestack.exp: failed to prepare
+ ...
+
+ Fix this by requiring -fsplit-stack, such that we have instead:
+ ...
+ UNSUPPORTED: gdb.base/morestack.exp: require failed: \
+ expr [have_compile_flag -fsplit-stack]
+ ...
+
+ Tested on x86_64-linux and aarch64-linux.
+
+2023-02-21 Tom de Vries <tdevries@suse.de>
+
+ [gdb/testsuite] Require syscall time in gdb.reverse/time-reverse.exp
+ On aarch64-linux, I run into:
+ ...
+ Running gdb.reverse/time-reverse.exp ...
+ gdb compile failed, gdb.reverse/time-reverse.c: In function 'main':
+ gdb.reverse/time-reverse.c:39:12: error: 'SYS_time' undeclared \
+ (first use in this function); did you mean 'SYS_times'?
+ syscall (SYS_time, &time_global);
+ ^~~~~~~~
+ SYS_times
+ gdb.reverse/time-reverse.c:39:12: note: each undeclared identifier is \
+ reported only once for each function it appears in
+ UNTESTED: gdb.reverse/time-reverse.exp: failed to prepare
+ ...
+
+ Fix this by adding a new proc have_syscall, and requiring syscall time, such
+ that we have instead:
+ ...
+ UNSUPPORTED: gdb.reverse/time-reverse.exp: require failed: \
+ expr [have_syscall time]
+ ...
+
+ Tested on x86_64-linux and aarch64-linux.
+
+2023-02-21 Tom de Vries <tdevries@suse.de>
+
+ [gdb/testsuite] Require python in gdb.dap/basic-dap.exp
+ When running test-case gdb.dap/basic-dap.exp with a gdb without python
+ support, I run into:
+ ...
+ builtin_spawn gdb -nw -nx -iex set height 0 -iex set width 0 \
+ -data-directory data-directory -iex set debug dap-log-file dap.log.1 -q \
+ -i=dap
+ >>> {"seq": 1, "type": "request", "command": "initialize"}
+ Interpreter `dap' unrecognized
+ ERROR: eof reading json header
+ ...
+
+ Fix this by requiring python in the test-case.
+
+ Tested on x86_64-linux, both with a gdb without and with python.
+
+2023-02-21 Nick Clifton <nickc@redhat.com>
+
+ Update the description of the bfd_fill_in_gnu_debuglink_section function
+
+ Updated translatios for the bfd and gprof directories.
+
+2023-02-21 Clément Chigot <chigot@adacore.com>
+
+ gas/testsuite: adjust a test for case insensitive file systems
+ When dealing with case insensitive file systems, ".file line.s" and
+ ".file Line.s" are identical and thus gas won't change the current
+ input file.
+ However, in line.l test, it's expecting to trigger an input file switch.
+ As the second filename doesn't matter in it, change it to fit for those
+ file systems.
+
+ gas/ChangeLog:
+
+ * testsuite/gas/elf/line.l: Change Line.s to Line2.s.
+ * testsuite/gas/elf/line.s: Adjust output.
+
+2023-02-21 Luis Machado <luis.machado@arm.com>
+
+ [aarch64] Enable pointer authentication support for aarch64 bare metal/kernel mode addresses
+ At the moment GDB only handles pointer authentication (pauth) for userspace
+ addresses and if we're debugging a Linux-hosted program.
+
+ The Linux Kernel can be configured to use pauth instructions for some
+ additional security hardening, but GDB doesn't handle this well.
+
+ To overcome this limitation, GDB needs a couple things:
+
+ 1 - The target needs to advertise pauth support.
+ 2 - The hook to remove non-address bits from a pointer needs to be registered
+ in aarch64-tdep.c as opposed to aarch64-linux-tdep.c.
+
+ There is a patch for QEMU that addresses the first point, and it makes
+ QEMU's gdbstub expose a couple more pauth mask registers, so overall we will
+ have up to 4 pauth masks (2 masks or 4 masks):
+
+ pauth_dmask
+ pauth_cmask
+ pauth_dmask_high
+ pauth_cmask_high
+
+ pauth_dmask and pauth_cmask are the masks used to remove pauth signatures
+ from userspace addresses. pauth_dmask_high and pauth_cmask_high masks are used
+ to remove pauth signatures from kernel addresses.
+
+ The second point is easily addressed by moving code around.
+
+ When debugging a Linux Kernel built with pauth with an unpatched GDB, we get
+ the following backtrace:
+
+ #0 __fput (file=0xffff0000c17a6400) at /repos/linux/fs/file_table.c:296
+ #1 0xffff8000082bd1f0 in ____fput (work=<optimized out>) at /repos/linux/fs/file_table.c:348
+ #2 0x30008000080ade30 [PAC] in ?? ()
+ #3 0x30d48000080ade30 in ?? ()
+ Backtrace stopped: previous frame identical to this frame (corrupt stack?)
+
+ With a patched GDB, we get something a lot more meaningful:
+
+ #0 __fput (file=0xffff0000c1bcfa00) at /repos/linux/fs/file_table.c:296
+ #1 0xffff8000082bd1f0 in ____fput (work=<optimized out>) at /repos/linux/fs/file_table.c:348
+ #2 0xffff8000080ade30 [PAC] in task_work_run () at /repos/linux/kernel/task_work.c:179
+ #3 0xffff80000801db90 [PAC] in resume_user_mode_work (regs=0xffff80000a96beb0) at /repos/linux/include/linux/resume_user_mode.h:49
+ #4 do_notify_resume (regs=regs@entry=0xffff80000a96beb0, thread_flags=4) at /repos/linux/arch/arm64/kernel/signal.c:1127
+ #5 0xffff800008fb9974 [PAC] in prepare_exit_to_user_mode (regs=0xffff80000a96beb0) at /repos/linux/arch/arm64/kernel/entry-common.c:137
+ #6 exit_to_user_mode (regs=0xffff80000a96beb0) at /repos/linux/arch/arm64/kernel/entry-common.c:142
+ #7 el0_svc (regs=0xffff80000a96beb0) at /repos/linux/arch/arm64/kernel/entry-common.c:638
+ #8 0xffff800008fb9d34 [PAC] in el0t_64_sync_handler (regs=<optimized out>) at /repos/linux/arch/arm64/kernel/entry-common.c:655
+ #9 0xffff800008011548 [PAC] in el0t_64_sync () at /repos/linux/arch/arm64/kernel/entry.S:586
+ Backtrace stopped: Cannot access memory at address 0xffff80000a96c0c8
+
+2023-02-21 Clément Chigot <chigot@adacore.com>
+
+ ld/testsuite: don't output to /dev/null
+ Mingw doesn't have /dev/null and thus "-o /dev/null" will fail.
+ Currently, all the options are checked using this "-o /dev/null",
+ resulting in them being disabled on mingw hosts.
+ Fix that by outputting to a real file for all targets.
+
+ ld/ChangeLog:
+
+ * testsuite/config/default.exp: Replace "-o /dev/null" by a
+ file.
+
+2023-02-21 Alan Modra <amodra@gmail.com>
+
+ Both FAIL and PASS "check sections 2"?
+ * testsuite/ld-checks/checks.exp (check sections 2): Don't
+ continue on with rest of test past first fail.
+
+ ld-libs test on alpha-vms
+ * testsuite/ld-libs/libs.exp: Don't run for alpha-vms.
+
+2023-02-21 Alan Modra <amodra@gmail.com>
+
+ alpha-*-vms missing libraries
+ For this:
+ ./ld-new: cannot find -limagelib: No such file or directory
+ ./ld-new: cannot find -lstarlet: No such file or directory
+ ./ld-new: cannot find -lsys$public_vectors: No such file or directory
+ the logs showed
+ creating dummy tmpdir/libimagelib:
+ creating dummy No
+ creating dummy such
+ etc.
+ So rubbish instead of tmpdir/libimagelib.a and the other required libs.
+
+ * testsuite/config/default.exp: Correct regex detecting missing
+ libraries automatically searched by alpha-dec-vms-ld.
+
+2023-02-21 GDB Administrator <gdbadmin@sourceware.org>
+
+ Automatic date update in version.in
+
+2023-02-20 Tom Tromey <tom@tromey.com>
+
+ Redefine FUNCTION in doc.str
+ FUNCTION is identical to func, so simplify doc.str.
+
+ 2023-02-17 Tom Tromey <tom@tromey.com>
+
+ * doc/doc.str (FUNCTION): Call func.
+
+2023-02-20 Tom Tromey <tom@tromey.com>
+
+ Hoist the SECTION comment in opncls.c
+ The opening and closing node in BFD starts:
+
+ File: bfd.info, [...]
+
+ /* Set to N to open the next N BFDs using an alternate id space. */
+ extern unsigned int bfd_use_reserved_id;
+
+ 2.13 Opening and closing BFDs
+ =============================
+
+ That is, there's a stray C comment and declaration before any other
+ text or subsections.
+
+ This occurs because the code fragment for bfd_use_reserved_id comes
+ before the SECTION comment. Hoisting it makes this a little nicer.
+
+ 2023-02-17 Tom Tromey <tom@tromey.com>
+
+ * opncls.c: Hoist the SECTION comment.
+
+2023-02-20 Tom Tromey <tom@tromey.com>
+
+ Don't use chew comments for static functions
+ I found a few static functions in the BFD manual. These can't be
+ called by any user of the library, so I don't think it's useful to put
+ them in the manual. This patch removes the chew markup from their
+ comments.
+
+ 2023-02-17 Tom Tromey <tom@tromey.com>
+
+ * opncls.c (bfd_get_debug_link_info_1, separate_debug_file_exists)
+ (separate_alt_debug_file_exists, find_separate_debug_file)
+ (get_build_id, get_build_id_name, check_build_id_file): Don't use
+ chew comments.
+
+2023-02-20 Tom Tromey <tom@tromey.com>
+
+ Fix formatting of long function description in chew output
+ Currently, if a function description spans a line, the resulting info
+ can look like this:
+
+ -- Function: long bfd_canonicalize_reloc
+ (bfd *abfd, asection *sec, arelent **loc, asymbol **syms); Call the
+ back end associated with the open BFD ABFD and translate the
+ external form of the relocation information attached to SEC into
+ the internal canonical form. Place the table into memory at LOC,
+
+ That is, the function prototype runs together with the text in an ugly
+ way. This patch fixes this by introducing a new primitive, so that
+ the generated Texinfo can be a bit nicer. Now this output looks like:
+
+ -- Function: long bfd_canonicalize_reloc (bfd *abfd, asection *sec,
+ arelent **loc, asymbol **syms);
+ Call the back end associated with the open BFD ABFD and translate
+ the external form of the relocation information attached to SEC
+
+ 2023-02-17 Tom Tromey <tom@tromey.com>
+
+ * doc/doc.str (SYNOPSIS): Use collapse_whitespace.
+ * doc/chew.c (collapse_whitespace): New function.
+ (main): Register collapse_whitespace.
+
+2023-02-20 Andreas Schwab <schwab@suse.de>
+
+ opcodes: style m68k disassembler output
+
+2023-02-20 Simon Marchi <simon.marchi@efficios.com>
+
+ gdb: revert one erroneous bool-ification change
+ Commit 42c13555ff88 ("Change value::m_stack to bool") erroneously
+ changed a `0` to `false` in this call to read_value_memory. This
+ parameter is `LONGEST bit_offset`, it should stay `0`.
+
+ Change-Id: I128df6834cf8055ec6a7051e237e379978d3d651
+
+2023-02-20 Clément Chigot <chigot@adacore.com>
+
+ ld/testsuite: handle Windows drive letter in a noinit test
+ The regexp in "noinit sections (ld -r)" is skipping the file path before
+ the first ":". However, on Windows, a path can start with "C:". Adjust
+ the regexp to allow such cases.
+
+ ld/ChangeLog:
+
+ * testsuite/ld-elf/noinit-sections-2.l: Allow Windows paths
+ (starting with C:).
+
+2023-02-20 Clément Chigot <chigot@adacore.com>
+
+ ld/testsuite: adjust to Windows path separator.
+ In some tests, the path reported on Windows will have a \ instead of a
+ /. This occurs when a file is concatened with the search path in
+ ldfile.c.: "ld -Ltmpdir -ltext" will result into "tmpdir\libtext.a".
+
+ ld/ChangeLog:
+
+ * testsuite/ld-elf/retain5.map: Allow \ path separator.
+ * testsuite/ld-plugin/plugin-10.d: Likewise.
+ * testsuite/ld-plugin/plugin-11.d: Likewise.
+ * testsuite/ld-plugin/plugin-18.d: Likewise.
+ * testsuite/ld-plugin/plugin-19.d: Likewise.
+ * testsuite/ld-plugin/plugin-20.d: Likewise.
+ * testsuite/ld-plugin/plugin-22.d: Likewise.
+
+2023-02-20 Andrew Burgess <aburgess@redhat.com>
+
+ gdb/doc: Consistency fixes for GDB/MI documentation
+ I noticed two inconsistencies in the GDB/MI documentation, which this
+ commit addresses:
+
+ 1. Each MI command is introduced like this:
+
+ @subheading The @code{-command-name} Command
+
+ Except for a few of the tracing command, which just use:
+
+ @subheading -command-name
+
+ In this commit I've updated all these trace commands to use the
+ more common format.
+
+ 2. Each MI command starts with a @subheading, and then the details
+ of that command are split up using multiple @subsubheading
+ entries.
+
+ Except for a few commands which use @subheading for the top-level
+ command, and then continue to use @subheading for each part of
+ the command description.
+
+ In this commit I've updated these to use @subsubheading where
+ appropriate.
+
+2023-02-20 Nick Clifton <nickc@redhat.com>
+
+ So the linker from producing an export data table when run with --exclude-all-symbols.
+ PR 30004 * pe-dll.c (pe_dll_build_sections): Do not build an edata section if all symbols are being excluded.
+
+2023-02-20 Tom de Vries <tdevries@suse.de>
+
+ [gdb/symtab] Trust epilogue unwind info for unknown or non-gcc producer
+ Currently we only trust epilogue unwind info only for gcc >= 4.5.0.
+
+ This has the effect that we don't trust epilogue unwind info for:
+ - unknown producers (CU without DW_AT_producer attribute)
+ - non-gcc producers (say, clang).
+
+ Instead, only distrust epilogue unwind info only for gcc < 4.5.0.
+
+2023-02-20 Tom de Vries <tdevries@suse.de>
+
+ [gdb/symtab] Trust epilogue unwind info for unknown producer (-g0 case)
+ For a -g0 -fasynchronous-unwind-tables exec (without .debug_info but with
+ .eh_frame section), start using the dwarf2 unwinder instead of the
+ "amd64 epilogue override" unwinder, by returning true in
+ compunit_epilogue_unwind_valid for cust == nullptr.
+
+ This has effect both on the amd64 and i386 targets, but only add amd64
+ test-case gdb.base/unwind-on-each-insn-amd64-2.exp.
+
+2023-02-20 Tom de Vries <tdevries@suse.de>
+
+ [gdb/tdep] Add amd64/i386 epilogue override unwinders
+ For amd64 the current frame-unwinders are:
+ ...
+ $ gdb -q -batch -ex "set arch i386:x86-64" -ex "maint info frame-unwinders"
+ The target architecture is set to "i386:x86-64".
+ dummy DUMMY_FRAME
+ dwarf2 tailcall TAILCALL_FRAME
+ inline INLINE_FRAME
+ python NORMAL_FRAME
+ amd64 epilogue NORMAL_FRAME
+ dwarf2 NORMAL_FRAME
+ dwarf2 signal SIGTRAMP_FRAME
+ amd64 sigtramp SIGTRAMP_FRAME
+ amd64 prologue NORMAL_FRAME
+ ...
+
+ For a -g0 -fasynchronous-unwind-tables exec (without .debug_info but with
+ .eh_frame section), we'd like to start using the dwarf2 unwinder instead of
+ the "amd64 epilogue" unwinder, by returning true in
+ compunit_epilogue_unwind_valid for cust == nullptr.
+
+ But we'd run into the following problem for a -g0
+ -fno-asynchronous-unwind-tables (without .debug_info and .eh_frame section)
+ exec:
+ - the "amd64 epilogue" unwinder would not run
+ (because compunit_epilogue_unwind_valid () == true)
+ - the dwarf2 unwinder would also not run
+ (because there's no .eh_frame info).
+
+ Fix this by:
+ - renaming the "amd64 epilogue" unwinder to "amd64 epilogue override", and
+ - adding a fallback "amd64 epilogue" after the dwarf unwinders,
+ while making sure that only one of the two is active. Likewise for i386. NFC.
+
+ For amd64, this results in this change:
+ ...
+ $ gdb -q -batch -ex "set arch i386:x86-64" -ex "maint info frame-unwinders"
+ The target architecture is set to "i386:x86-64".
+ dummy DUMMY_FRAME
+ dwarf2 tailcall TAILCALL_FRAME
+ inline INLINE_FRAME
+ python NORMAL_FRAME
+ -amd64 epilogue NORMAL_FRAME
+ +amd64 epilogue override NORMAL_FRAME
+ dwarf2 NORMAL_FRAME
+ dwarf2 signal SIGTRAMP_FRAME
+ +amd64 epilogue NORMAL_FRAME
+ amd64 sigtramp SIGTRAMP_FRAME
+ amd64 prologue NORMAL_FRAME
+ ...
+
+ And for i386:
+ ...
+ $ gdb -q -batch -ex "set arch i386" -ex "maint info frame-unwinders"
+ The target architecture is set to "i386".
+ dummy DUMMY_FRAME
+ dwarf2 tailcall TAILCALL_FRAME
+ iline INLINE_FRAME
+ -i386 epilogue NORMAL_FRAME
+ +i386 epilogue override NORMAL_FRAME
+ dwarf2 NORMAL_FRAME
+ dwarf2 signal SIGTRAMP_FRAME
+ +i386 epilogue NORMAL_FRAME
+ i386 stack tramp NORMAL_FRAME
+ i386 sigtramp SIGTRAMP_FRAME
+ i386 prologue NORMAL_FRAME
+ ...
+
+2023-02-20 Tom de Vries <tdevries@suse.de>
+
+ [gdb/tdep] Fix amd64/i386_stack_frame_destroyed_p
+ The use of compunit_epilogue_unwind_valid in both amd64_stack_frame_destroyed_p
+ and i386_stack_frame_destroyed_p is problematic, in the sense that the
+ functions no longer match their documented behaviour.
+
+ Fix this by moving the use of compunit_epilogue_unwind_valid to
+ amd64_epilogue_frame_sniffer and i386_epilogue_frame_sniffer. No functional
+ changes.
+
+2023-02-20 Tom de Vries <tdevries@suse.de>
+
+ [gdb/symtab] Factor out compunit_epilogue_unwind_valid
+ Factor out compunit_epilogue_unwind_valid from both
+ amd64_stack_frame_destroyed_p and i386_stack_frame_destroyed_p. No functional
+ changes.
+
+ Also add a comment in the new function about the assumption that in absence of
+ producer information, epilogue unwind info is invalid.
+
+ Approved-By: Tom Tromey <tom@tromey.com>
+
+2023-02-20 Tom de Vries <tdevries@suse.de>
+
+ [gdb/testsuite] Add xfail case in gdb.python/py-record-btrace.exp
+ I came across:
+ ...
+ gdb) PASS: gdb.python/py-record-btrace.exp: prepare record: stepi 100
+ python insn = r.instruction_history^M
+ warning: Non-contiguous trace at instruction 1 (offset = 0x3e10).^M
+ (gdb) FAIL: gdb.python/py-record-btrace.exp: prepare record: python insn = r.i\
+ nstruction_history
+ ...
+
+ I'm assuming it's the same root cause as for the already present XFAIL.
+
+ Fix this by recognizing above warning in the xfail regexp.
+
+ Tested on x86_64-linux, although sofar I was not able to trigger the warning
+ again.
+
+ Approved-By: Markus T. Metzger <markus.t.metzger@intel.com>
+
+2023-02-20 Tom de Vries <tdevries@suse.de>
+
+ [gdb/testsuite] Fix gdb.threads/schedlock.exp for gcc 4.8.5
+ Since commit 9af467b8240 ("[gdb/testsuite] Fix gdb.threads/schedlock.exp on
+ fast cpu"), the test-case fails for gcc 4.8.5.
+
+ The problem is that for gcc 4.8.5, the commit turned a two-line loop:
+ ...
+ (gdb) next
+ 78 while (*myp > 0)
+ (gdb) next
+ 81 MAYBE_CALL_SOME_FUNCTION(); (*myp) ++;
+ (gdb) next
+ 78 while (*myp > 0)
+ ...
+ into a three-line loop:
+ ...
+ (gdb) next
+ 83 MAYBE_CALL_SOME_FUNCTION(); (*myp) ++;
+ (gdb) next
+ 84 cnt++;
+ (gdb) next
+ 85 }
+ (gdb) next
+ 83 MAYBE_CALL_SOME_FUNCTION(); (*myp) ++;
+ (gdb)
+ ...
+ and the test-case doesn't expect this.
+
+ Fix this by reverting back to the original loop shape as much as possible by:
+ - removing the cnt++ line
+ - replacing "while (1)" with "while (one)", where one is a volatile variable
+ set to 1.
+
+ Tested on x86_64-linux, using compilers:
+ - gcc 4.8.5, 7.5.0, 12.2.1
+ - clang 4.0.1, 13.0.1
+
+2023-02-20 Alan Modra <amodra@gmail.com>
+
+ In-memory nested archives
+ alpha-linuxecoff has compressed archives that are decompressed to a
+ bfd-in-memory. We'd need to handle quite a lot of corner cases to
+ support nesting of such archives, so just stop it before we run into
+ segfaults later.
+
+ * opncls.c (_bfd_new_bfd_contained_in): Prohibit nested
+ archives in memory.
+
+2023-02-20 GDB Administrator <gdbadmin@sourceware.org>
+
+ Automatic date update in version.in
+
+2023-02-19 Tom Tromey <tom@tromey.com>
+
+ Convert contained_in to method
+ This converts contained_in to be a method of block.
+
+ Make block members 'private'
+ This changes block to make the data members 'private'.
+
+ Remove allocate_block and allocate_global_block
+ This removes allocate_block and allocate_global_block in favor of
+ simply calling 'new'.
+
+ Have global_block inherit from block
+ This changes global_block to inherit from block, which is what was
+ always intended.
+
+ Use 'new' for block and global_block
+ This changes block and global_block to add initializers, and then to
+ use 'new' for allocation.
+
+2023-02-19 Tom Tromey <tom@tromey.com>
+
+ Fix memory leak in mdebugread.c
+ mdebugread.c allocates blocks on the heap. However, this is a memory
+ leak if the corresponding objfile is ever destroyed.
+
+ This patch changes this code to use allocate_block instead, fixing a
+ FIXME from 2003.
+
+ I don't know how to test this patch.
+
+2023-02-19 Tom Tromey <tom@tromey.com>
+
+ Remove ALL_BLOCK_SYMBOLS
+ This removes ALL_BLOCK_SYMBOLS in favor of foreach.
+
+ Remove ALL_BLOCK_SYMBOLS_WITH_NAME
+ This removes ALL_BLOCK_SYMBOLS_WITH_NAME in favor of foreach.
+
+ Convert explicit iterator uses to foreach
+ This converts most existing explicit uses of block_iterator to use
+ foreach with the range iterator instead.
+
+ Introduce a block iterator wrapper
+ This introduces a C++-style iterator that wraps the existing
+ block_iterator. It also adds a range adapter. These will be used in
+ a later patch.
+
+ Combine both styles of block iterator
+ This merges the two styles of block iterator, having the
+ initialization API decide which to use based on an optional parameter.
+
+ Store 'name' in block_iterator
+ This changes the block_iterator to store the 'name' that is used by
+ block_iter_match_next. This avoids any problem where the name could
+ be passed inconsistently, and also makes the subsequent patches easier
+ to understand.
+
+ Convert block_static_link to method
+ This converts block_static_link to be a method. This was mostly
+ written by script.
+
+ Convert set_block_compunit_symtab to method
+ This converts set_block_compunit_symtab to be a method. This was
+ mostly written by script.
+
+ Convert block_static_block and block_global_block to methods
+ This converts block_static_block and block_global_block to be methods.
+ This was mostly written by script. It was simpler to convert them at
+ the same time because they're often used near each other.
+
+ Convert block_containing_function to method
+ This converts block_containing_function to be a method. This was
+ mostly written by script.
+
+ Convert block_linkage_function to method
+ This converts block_linkage_function to be a method. This was mostly
+ written by script.
+
+ Convert more block functions to methods
+ This converts block_scope, block_set_scope, block_using, and
+ block_set_using to be methods. These are all done at once to make it
+ easier to also convert block_initialize_namespace at the same time.
+ This was mostly written by script.
+
+ Convert block_inlined_p to method
+ This converts block_inlined_p to be a method. This was mostly written
+ by script.
+
+ Convert block_gdbarch to method
+ This converts block_gdbarch to be a method. This was mostly written
+ by script.
+
+ Convert block_objfile to method
+ This converts block_objfile to be a method. This was mostly written
+ by script.
+
+ Don't allow NULL as an argument to block_global_block
+ block_global_block has special behavior when the block is NULL.
+ Remove this and patch up the callers instead.
+
+ Don't allow NULL as an argument to block_static_block
+ block_static_block has special behavior when the block is NULL.
+ Remove this and patch up the callers instead.
+
+ Don't allow NULL as an argument to block_using
+ block_using has special behavior when the block is NULL.
+ Remove this. No caller seems to be affected.
+
+ Don't allow NULL as an argument to block_scope
+ block_scope has special behavior when the block is NULL.
+ Remove this and patch up the callers instead.
+
+ Avoid extra allocations in block
+ block_set_scope and block_set_using unconditionally allocate the block
+ namespace object. However, this isn't truly needed, so arrange to
+ only allocate when it is.
+
+ Rearrange block.c to avoid a forward declaration
+ Moving block_initialize_namespace before its callers lets us avoid a
+ forward declaration.
+
+2023-02-19 Alan Modra <amodra@gmail.com>
+
+ Buffer overflow in evax_bfd_print_eobj
+ * vms-alpha.c (evax_bfd_print_eobj): Rewrite header handling,
+ sanity checking rec_len. Check bfd_malloc return.
+
+2023-02-19 Tom Tromey <tom@tromey.com>
+
+ Avoid memory leak in chew
+ An earlier patch of mine introduced a memory leak in chew. The bug
+ was that the new "variable" word didn't free the following word. This
+ patch fixes it by arranging to transfer ownership of the name to the
+ variable itself.
+
+ * doc/chew.c (add_variable): New function, from
+ add_intrinsic_variable.
+ (add_intrinsic_variable): Call add_variable.
+ (compile): Call add_variable.
+
+2023-02-19 GDB Administrator <gdbadmin@sourceware.org>
+
+ Automatic date update in version.in
+
+2023-02-18 Tom Tromey <tom@tromey.com>
+
+ Fix "start" for D, Rust, etc
+ The new DWARF indexer broke "start" for some languages.
+
+ For D, it is broken because, while the code in cooked_index_shard::add
+ specifically excludes Ada, it fails to exclude D. This means that the
+ C "main" will be detected as "main" here -- whereas what is intended
+ is for the code in find_main_name to use d_main_name to find the name.
+
+ The Rust compiler, on the other hand, uses DW_AT_main_subprogram.
+ However, the code in dwarf2_build_psymtabs_hard fails to create a
+ fully-qualified name, so the name always ends up as plain "main".
+
+ For D and Ada, a very simple approach suffices: remove the check
+ against "main" from cooked_index_shard::add. This also has the
+ benefit of slightly speeding up DWARF indexing. I assume this
+ approach will work for Pascal and Modula-2 as well, but I don't have a
+ way to test those at present.
+
+ For Rust, though, this is not sufficient. And, computing the
+ fully-qualified name in dwarf2_build_psymtabs_hard will crash, because
+ cooked_index_entry::full_name uses the canonical name -- and that is
+ not computed until after canonicalization.
+
+ However, we don't want to wait for canonicalization to be done before
+ computing the main name. That would remove any benefit from doing
+ canonicalization is the background.
+
+ This patch solves this dilemma by noticing that languages using
+ DW_AT_main_subprogram are, currently, disjoint from languages
+ requiring canonicalization. Because of this, we can add a parameter
+ to full_name to let us avoid crashes, slowdowns, and races here.
+
+ This is kind of tricky and ugly, so I've tried to comment it
+ sufficiently.
+
+ While doing this, I had to change gdb.dwarf2/main-subprogram.exp. A
+ different possibility here would be to ignore the canonicalization
+ needs of C in this situation, because those only affect certain types.
+ However, I chose this approach because the test case is artificial
+ anyhow.
+
+ A long time ago, in an earlier threading attempt, I changed the global
+ current_language to be a function (hidden behind a macro) to let us
+ attempt lazily computing the current language. Perhaps this approach
+ could still be made to work. However, that also seemed rather tricky,
+ more so than this patch.
+
+ Reviewed-By: Andrew Burgess <aburgess@redhat.com>
+ Bug: https://sourceware.org/bugzilla/show_bug.cgi?id=30116
+
+2023-02-18 Tom Tromey <tom@tromey.com>
+
+ Fix crash in go_symbol_package_name
+ go_symbol_package_name package name asserts that it is only passed a
+ Go symbol, but this is not enforced by one caller. It seems simplest
+ to just check and return early in this case.
+
+ Bug: https://sourceware.org/bugzilla/show_bug.cgi?id=17876
+ Reviewed-By: Andrew Burgess <aburgess@redhat.com>
+
+2023-02-18 Tom Tromey <tom@tromey.com>
+
+ Avoid manual memory management in go-lang.c
+ I noticed a couple of spots in go-lang.c that could be improved by
+ using unique_ptr.
+
+ Reviewed-By: Andrew Burgess <aburgess@redhat.com>
+
+2023-02-18 GDB Administrator <gdbadmin@sourceware.org>
+
+ Automatic date update in version.in
+
+2023-02-17 Andrew Burgess <aburgess@redhat.com>
+
+ gdb: fix regression in gdb.xml/maint_print_struct.exp
+ A regression in gdb.xml/maint_print_struct.exp was introduced with
+ commit:
+
+ commit 81b86eced24f905545b58aa6c27478104c364976
+ Date: Fri Jan 6 09:30:40 2023 -0700
+
+ Do not record a rejected target description
+
+ The test relied on an invalid target description being stored within
+ the tdesc_info of the current inferior, the above commit stopped this
+ behaviour.
+
+ Update the test to check that the invalid architecture is NOT stored,
+ and then check printing the target description directly from the
+ file.
+
+ Approved-By: Tom Tromey <tromey@adacore.com>
+
+2023-02-17 Vladimir Mezentsev <vladimir.mezentsev@oracle.com>
+
+ gprofng: fix Dwarf reader for DW_TAG_subprogram
+ gprofng/ChangeLog
+ 2023-02-16 Vladimir Mezentsev <vladimir.mezentsev@oracle.com>
+
+ * src/Dwarf.cc: Skip DW_TAG_subprogram when DW_AT_declaration is 1.
+
+2023-02-17 Vladimir Mezentsev <vladimir.mezentsev@oracle.com>
+
+ gprofng: PR30036 Build failure on aarch64 w/ glibc: symbol `pwrite64' is already defined
+ gprofng/ChangeLog
+ 2023-02-16 Vladimir Mezentsev <vladimir.mezentsev@oracle.com>
+
+ PR gprofng/30036
+ * libcollector/iotrace.c: Define creat64 and pwrite64 only when
+ __USE_LARGEFILE64 and __USE_FILE_OFFSET64 are not defined.
+ * libcollector/mmaptrace.c: Likewise for mmap64.
+
+2023-02-17 Aditya Vidyadhar Kamath <Aditya.Kamath1@ibm.com>
+
+ Fix multi-threaded debugging under AIX
+ Multi-threaded debugging using the libpthdebug debug interface
+ is currently broken due to multiple issues.
+
+ When debugging a single inferior, we were getting assertion
+ failures in get_aix_thread_info as no tp->priv structure was
+ allocated for the main thread.
+
+ We fixed this by switching the main
+ thread from a (pid, 0, 0) ptid_t to a (pid, 0, tid) ptid_t and
+ allocaing the tp->priv structure in sync_threadlists.
+
+ As a result, the switch_to_thread call in pdc_read_data could
+ now fail since the main thread no longer uses (pid, 0, 0).
+
+ So we replaced the call by only switching inferior_ptid, the current
+ inferior, and the current address space (like proc-service.c).
+ Add similar switching to pdc_write_data where it was missing
+ completely.
+
+ When debugging multiple inferiors, an additional set of
+ problems prevented correct multi-threaded debugging:
+
+ First of all, aix-thread.c used to have a number of global
+ variables holding per-inferior information.
+
+ We switched hese
+ to a per-inferior data structure instead.
+
+ Also, sync_threadlists was getting confused as we were
+ comparing the list of threads returned by libpthdebug
+ for *one* process with GDB's list of threads for *all*
+ processes. Now we only use he GDB threads of the current
+ inferior instead.
+
+ We also skip calling pd_activate
+ from pd_enable if that in_initial_library_scan flag is
+ true for the current inferior.
+
+ Finally, the presence of the thread library in any but
+ the first inferior was not correctly detected due to a
+ bug in solib-aix.c, where the BFD file name for shared
+ library members was changed when the library was loaded
+ for the first time, which caused the library to no longer
+ be recognized by name when loaded a second time.
+
+2023-02-17 Tom Tromey <tromey@adacore.com>
+
+ Remove two unnecessary returns in ada-lang.c
+ I found a couple of spots in ada-lang.c where a return follows a call
+ to error. These are unnecessary because error never returns.
+
+2023-02-17 Tom de Vries <tdevries@suse.de>
+
+ [gdb/testsuite] Simplify gdb.arch/amd64-disp-step-avx.exp
+ On SLE-11, with glibc 2.11.3, I run into:
+ ...
+ (gdb) PASS: gdb.arch/amd64-disp-step-avx.exp: vex3: \
+ var128 has expected value after
+ continue^M
+ Continuing.^M
+ ^M
+ Program received signal SIGSEGV, Segmentation fault.^M
+ 0x0000000000400283 in _exit (status=0) at \
+ ../sysdeps/unix/sysv/linux/_exit.c:33^M
+ 33 ../sysdeps/unix/sysv/linux/_exit.c: No such file or directory.^M
+ (gdb) FAIL: gdb.arch/amd64-disp-step-avx.exp: \
+ continue until exit at amd64-disp-step-avx
+ ...
+
+ This is not related to gdb, we get the same result by just running the exec.
+
+ The problem is that the test-case:
+ - calls glibc's _exit, and
+ - uses -nostartfiles -static, putting the burden for any necessary
+ initialization for calling glibc's _exit on the test-case itself.
+
+ So, when we get to the second insn in _exit:
+ ...
+ 000000000040acb0 <_exit>:
+ 40acb0: 48 63 d7 movslq %edi,%rdx
+ 40acb3: 64 4c 8b 14 25 00 00 mov %fs:0x0,%r10
+ ...
+ no glibc-related initialization is done, and we run into the segfault.
+
+ Adding this (borrowed from __libc_start_main) in _start in the .S file is
+ sufficient to fix it:
+ ...
+ .rept 200
+ nop
+ + call __pthread_initialize_minimal
+ .endr
+ ...
+ But that already doesn't compile with say glibc 2.31, and regardless I think
+ this sort of fix is too fragile.
+
+ We could of course fix this by simply not running to exit. But ideally we'd
+ have an exec that doesn't segfault when you just run it.
+
+ Alternatively, we could hand-code an _exit syscall and bypass glibc
+ all together. But I'd rather fix this in a way that simplifies the test-case.
+
+ Taking a step back, the -nostartfiles -static was added to address that the
+ xmm registers were not zero at main (which AFAICT is a valid thing to happen).
+
+ [ The change itself silently broke the test-case, needing further fixing by
+ commit 40310f30a51 ("gdb: make gdb.arch/amd64-disp-step-avx.exp actually test
+ displaced stepping"). ]
+
+ Instead, simplify things by reverting to the original situation:
+ - no -nostartfiles -static compilation flags,
+ - no _start in the .S file,
+ - use exit instead of _exit in the .S file,
+ and fix the original problem by setting the xmm registers to zero rather than
+ checking that they're zero.
+
+ Now that we're no longer forcing -static, add nopie to the flags to prevent
+ compilation failure with target board unix/-fPIE/-pie.
+
+ Tested on x86_64-linux.
+
+ PR testsuite/30132
+ Bug: https://sourceware.org/bugzilla/show_bug.cgi?id=30132
+
+2023-02-17 Alan Modra <amodra@gmail.com>
+
+ ld test asciz and ascii fails
+ Fix these fails:
+ alpha-dec-vms +FAIL: ld-scripts/asciz
+ alpha-dec-vms +FAIL: ld-scripts/ascii
+ i386-go32 +FAIL: ld-scripts/asciz
+ sh-coff +FAIL: ld-scripts/asciz
+
+ It's better to positively select targets for .section support than to
+ try to exclude all targets that don't. Make a new is_coff_format so
+ we can easily select such.
+
+ binutils/
+ * testsuite/lib/binutils-common.exp (is_coff_format): New.
+ ld/
+ * testsuite/ld-scripts/ascii.d: Use is_elf_format and
+ is_coff_format to select targets, exclude ti coff.
+ * testsuite/ld-scripts/asciz.d: Likewise. Accept trailing zeros.
+
+2023-02-17 Alan Modra <amodra@gmail.com>
+
+ Wild pointer reads in _bfd_ecoff_locate_line
+ * ecofflink.c (mk_fdrtab): Sanity check fdr procedure descriptor
+ pointer and isymBase. Set fdrtab_len after possible discards.
+ Use size_t vars and catch possible size overflows.
+
+2023-02-17 GDB Administrator <gdbadmin@sourceware.org>
+
+ Automatic date update in version.in
+
+2023-02-16 Alan Modra <amodra@gmail.com>
+
+ PR30046, power cmpi leads to unknown architecture
+ PowerPC ELF always uses bfd_arch_powerpc, so we shouldn't allow the
+ gas -mpwr, -mpwr2 or -mpwrx options to choose bfd_arch_rs6000.
+ Given the possible values of ppc_cpu, I think the as_fatal at the end
+ of ppc_arch will never be reached, so it can be deleted and the code
+ simplified a little.
+
+ PR 30046
+ * config/tc-ppc.c (ppc_arch): Return bfd_arch_powerpc for ELF.
+ Delete dead code.
+
+2023-02-16 Tom Tromey <tromey@adacore.com>
+
+ Rename parameter of create_ada_exception_catchpoint
+ create_ada_exception_catchpoint has a parameter named "disabled", but
+ both its callers and callees use it to mean "enabled". This is
+ confusing, so this patch renames the parameter.
+
+2023-02-16 Tom Tromey <tom@tromey.com>
+
+ Update the 'g' packet documentation
+ The 'g' packet documentation references a macro that no longer exists,
+ and it also claims that the 'x' response for an unavailable register
+ is limited to trace frames. This patch updates the documentation to
+ reflect what I think is currently correct.
+
+ Co-Authored-By: Pedro Alves <pedro@palves.net>
+ Approved-By: Eli Zaretskii <eliz@gnu.org>
+ Change-Id: I863baa3b9293059cfd4aa3d534602cbcb693ba87
+
+2023-02-16 Nick Clifton <nickc@redhat.com>
+
+ Add support for the ASCII directive inside linker scripts.
+ * ldlex.l: Add ASCII token.
+ * ldgram.y: Add parsing of the ASCII command.
+ * ldlang.c (lang_add_string): Add maximum size parameter. Move escape character handling code into separate function.
+ * ldlang.h (lang_add_string): Update prototype.
+ * NEWS: Mention the new feature.
+ * ld.texi (Output Section Data): Document the new directives.
+ * testsuite/ld-scripts/asciz.t: Adjust to work on more architectures and to test more aspects of the ASCIZ directive.
+ * testsuite/ld-scripts/asciz.d: Adjust to match the changes to the test linker script.
+ * testsuite/ld-scripts/ascii.d: New test driver.
+ * testsuite/ld-scripts/ascii.s: New test assembler source.
+ * testsuite/ld-scripts/ascii.t: New test script.
+ * testsuite/ld-scripts/script.exp: Run the new test.
+
+2023-02-16 Tom Tromey <tromey@adacore.com>
+
+ Constify ada_main_name
+ Unlike the other *_main_name functions, ada_main_name returns a
+ non-const "char *". This is strange, though, because the caller
+ should not in fact modify or free this pointer. This patch changes
+ this function to constify its return type.
+
+ Remove unused declaration from ada-lang.h
+ I stumbled across this declaration in ada-lang.h. I don't know what
+ function did, but it no longer exists, so remove the declaration.
+ Tested by rebuilding.
+
+2023-02-16 Alan Modra <amodra@gmail.com>
+
+ Delete PROGRESS macros
+ I don't see much point in cluttering the source with the PROGRESS
+ macros, which of course do nothing at all with the definitions in
+ progress.h. progress.h is unchanged apart from the copyright comment
+ since commit d4d4c53c68f0 in 1994.
+
+ binutils/
+ * ar.c: Don't include progress.h, or invoke PROGRESS macros.
+ * nm.c: Likewise.
+ * objcopy.c: Likewise.
+ * objdump.c: Likewise.
+ gas/
+ * as.h: Don't include progress.h.
+ * as.c: Don't invoke PROGRESS macros.
+ * write.c: Likewise.
+ include/
+ * progress.h: Delete.
+ ld/
+ * ldmain.c: Don't include progress.h, or invoke PROGRESS macros.
+
+2023-02-16 Alan Modra <amodra@gmail.com>
+
+ gas_init
+ Rename gas_late_init to plain gas_init, to reinforce the idea that
+ this is where the bulk of gas initialisation belongs. Also reorder
+ some initialisation.
+
+ * as.c (gas_init): Rename from gas_late_init. Open output
+ file and arrange for dump_statistics to be called here rather
+ than in main. Create .gasversion. local symbol earlier,
+ because we can.
+
+2023-02-16 Jan Beulich <jbeulich@suse.com>
+
+ RISC-V: as_warn() already emits a newline
+ Therefore there shouldn't be any at the end of the format string.
+
+2023-02-16 Andrew Burgess <aburgess@redhat.com>
+
+ gdb/doc: document MI -remove-inferior command
+ Back in 2010 the -remove-inferior command was added in commit
+ a79b8f6ea8c2, unfortunately this command was never added to the
+ documentation.
+
+ This commit addresses that oversight.
+
+ Approved-By: Eli Zaretskii <eliz@gnu.org>
+
+2023-02-16 Jan Beulich <jbeulich@suse.com>
+
+ x86/gas: replace inappropriate assertion when parsing registers
+ PR gas/30117
+ Once a symbol had its expression evaluated, the "segment" of the symbol
+ may be reg_section if a register is merely involved in the expression,
+ not just when the expression references a "plain" register. Therefore
+ the first of the assertions put in place by 4d1bb7955a8b was too strict.
+ Convert it to an if() to deal with situations like this one found by
+ fuzzing:
+
+ x=s
+ s=%eax+0
+ y=s
+ or $6,x
+
+ In non-debug builds this also avoids potentially silently generating bad
+ code.
+
+2023-02-16 GDB Administrator <gdbadmin@sourceware.org>
+
+ Automatic date update in version.in
+
+2023-02-15 Tom Tromey <tom@tromey.com>
+
+ Return bool from more value methods
+ There are several more value methods that currently return 'int' but
+ that should return 'bool'. This patch updates these.
+
+ Reviewed-By: Bruno Larsen <blarsen@redhat.com>
+
+2023-02-15 Tom Tromey <tom@tromey.com>
+
+ Have value::bits_synthetic_pointer return bool
+ This changes value::bits_synthetic_pointer to return bool and fixes up
+ some fallout from this.
+
+ Reviewed-By: Bruno Larsen <blarsen@redhat.com>
+
+2023-02-15 Tom Tromey <tom@tromey.com>
+
+ Change value::m_stack to bool
+ This changes value::m_stack to be a bool and updates the various uses.
+
+ Reviewed-By: Bruno Larsen <blarsen@redhat.com>
+
+2023-02-15 Tom Tromey <tom@tromey.com>
+
+ Change value::m_initialized to bool
+ This changes value::m_initialized to be a bool and updates the various
+ uses.
+
+ Reviewed-By: Bruno Larsen <blarsen@redhat.com>
+
+2023-02-15 Tom Tromey <tom@tromey.com>
+
+ Change value::m_lazy to bool
+ This changes value::m_lazy to be a bool and updates the various uses.
+
+ Reviewed-By: Bruno Larsen <blarsen@redhat.com>
+
+2023-02-15 Tom Tromey <tom@tromey.com>
+
+ Change value::m_modifiable to bool
+ This changes value::m_modifiable to be a bool and updates the various
+ uses.
+
+ Reviewed-By: Bruno Larsen <blarsen@redhat.com>
+
+2023-02-15 Pedro Alves <pedro@palves.net>
+
+ Don't throw quit while handling inferior events, part II
+ I noticed that if Ctrl-C was typed just while GDB is evaluating a
+ breakpoint condition in the background, and GDB ends up reaching out
+ to the Python interpreter, then the breakpoint condition would still
+ fail, like:
+
+ c&
+ Continuing.
+ (gdb) Error in testing breakpoint condition:
+ Quit
+
+ That happens because while evaluating the breakpoint condition, we
+ enter Python, and end up calling PyErr_SetInterrupt (it's called by
+ gdbpy_set_quit_flag, in frame #0):
+
+ (top-gdb) bt
+ #0 gdbpy_set_quit_flag (extlang=0x558c68f81900 <extension_language_python>) at ../../src/gdb/python/python.c:288
+ #1 0x0000558c6845f049 in set_quit_flag () at ../../src/gdb/extension.c:785
+ #2 0x0000558c6845ef98 in set_active_ext_lang (now_active=0x558c68f81900 <extension_language_python>) at ../../src/gdb/extension.c:743
+ #3 0x0000558c686d3e56 in gdbpy_enter::gdbpy_enter (this=0x7fff2b70bb90, gdbarch=0x558c6ab9eac0, language=0x0) at ../../src/gdb/python/python.c:212
+ #4 0x0000558c68695d49 in python_on_memory_change (inferior=0x558c6a830b00, addr=0x555555558014, len=4, data=0x558c6af8a610 "") at ../../src/gdb/python/py-inferior.c:146
+ #5 0x0000558c6823a071 in std::__invoke_impl<void, void (*&)(inferior*, unsigned long, long, unsigned char const*), inferior*, unsigned long, long, unsigned char const*> (__f=@0x558c6a8ecd98: 0x558c68695d01 <python_on_memory_change(inferior*, CORE_ADDR, ssize_t, bfd_byte const*)>) at /usr/include/c++/11/bits/invoke.h:61
+ #6 0x0000558c68237591 in std::__invoke_r<void, void (*&)(inferior*, unsigned long, long, unsigned char const*), inferior*, unsigned long, long, unsigned char const*> (__fn=@0x558c6a8ecd98: 0x558c68695d01 <python_on_memory_change(inferior*, CORE_ADDR, ssize_t, bfd_byte const*)>) at /usr/include/c++/11/bits/invoke.h:111
+ #7 0x0000558c68233e64 in std::_Function_handler<void (inferior*, unsigned long, long, unsigned char const*), void (*)(inferior*, unsigned long, long, unsigned char const*)>::_M_invoke(std::_Any_data const&, inferior*&&, unsigned long&&, long&&, unsigned char const*&&) (__functor=..., __args#0=@0x7fff2b70bd40: 0x558c6a830b00, __args#1=@0x7fff2b70bd38: 93824992247828, __args#2=@0x7fff2b70bd30: 4, __args#3=@0x7fff2b70bd28: 0x558c6af8a610 "") at /usr/include/c++/11/bits/std_function.h:290
+ #8 0x0000558c6830a96e in std::function<void (inferior*, unsigned long, long, unsigned char const*)>::operator()(inferior*, unsigned long, long, unsigned char const*) const (this=0x558c6a8ecd98, __args#0=0x558c6a830b00, __args#1=93824992247828, __args#2=4, __args#3=0x558c6af8a610 "") at /usr/include/c++/11/bits/std_function.h:590
+ #9 0x0000558c6830a620 in gdb::observers::observable<inferior*, unsigned long, long, unsigned char const*>::notify (this=0x558c690828c0 <gdb::observers::memory_changed>, args#0=0x558c6a830b00, args#1=93824992247828, args#2=4, args#3=0x558c6af8a610 "") at ../../src/gdb/../gdbsupport/observable.h:166
+ #10 0x0000558c68309d95 in write_memory_with_notification (memaddr=0x555555558014, myaddr=0x558c6af8a610 "", len=4) at ../../src/gdb/corefile.c:363
+ #11 0x0000558c68904224 in value_assign (toval=0x558c6afce910, fromval=0x558c6afba6c0) at ../../src/gdb/valops.c:1190
+ #12 0x0000558c681e3869 in expr::assign_operation::evaluate (this=0x558c6af8e150, expect_type=0x0, exp=0x558c6afcfe60, noside=EVAL_NORMAL) at ../../src/gdb/expop.h:1902
+ #13 0x0000558c68450c89 in expr::logical_or_operation::evaluate (this=0x558c6afab060, expect_type=0x0, exp=0x558c6afcfe60, noside=EVAL_NORMAL) at ../../src/gdb/eval.c:2330
+ #14 0x0000558c6844a896 in expression::evaluate (this=0x558c6afcfe60, expect_type=0x0, noside=EVAL_NORMAL) at ../../src/gdb/eval.c:110
+ #15 0x0000558c6844a95e in evaluate_expression (exp=0x558c6afcfe60, expect_type=0x0) at ../../src/gdb/eval.c:124
+ #16 0x0000558c682061ef in breakpoint_cond_eval (exp=0x558c6afcfe60) at ../../src/gdb/breakpoint.c:4971
+ ...
+
+
+ The fix is to disable cooperative SIGINT handling while handling
+ inferior events, so that SIGINT is saved in the global quit flag, and
+ not in the extension language, while handling an event.
+
+ This commit augments the testcase added by the previous commit to test
+ this scenario as well.
+
+ Approved-By: Tom Tromey <tom@tromey.com>
+ Change-Id: Idf8ab815774ee6f4b45ca2d0caaf30c9b9f127bb
+
+2023-02-15 Pedro Alves <pedro@palves.net>
+
+ GC get_active_ext_lang
+ get_active_ext_lang is not used anywhere. Delete it.
+
+ Approved-By: Tom Tromey <tom@tromey.com>
+ Change-Id: I4c2b6d0d11291103c098e4db1d6ea449875c96b7
+
+2023-02-15 Pedro Alves <pedro@palves.net>
+
+ Don't throw quit while handling inferior events
+ This implements what I suggested here:
+
+ https://inbox.sourceware.org/gdb-patches/ab97c553-f406-b094-cdf3-ba031fdea925@palves.net/
+
+ Here is the current default quit_handler, a function that ends up
+ called by the QUIT macro:
+
+ void
+ default_quit_handler (void)
+ {
+ if (check_quit_flag ())
+ {
+ if (target_terminal::is_ours ())
+ quit ();
+ else
+ target_pass_ctrlc ();
+ }
+ }
+
+ As we can see above, when the inferior is running in the foreground,
+ then a Ctrl-C is translated into a call to target_pass_ctrlc().
+
+ The target_terminal::is_ours() case above is there to handle the
+ scenario where GDB has the terminal, meaning it is handling some
+ command the user typed, like "list", or "p a + b" or some such.
+
+ However, when the inferior is running on the background, say with
+ "c&", GDB also has the terminal. Run control handling is now done in
+ the "background". The CLI is responsive to user commands. If users
+ type Ctrl-C, they're expecting it to interrupt whatever command they
+ next type in the CLI, which again, could be "list", "p a + b", etc.
+ It's as if background run control was handled by a separate thread,
+ and the Ctrl-C is meant to go to the main thread, handling the CLI.
+
+ However, when handling an event, inside fetch_inferior_event &
+ friends, a Ctrl-C _also_ results in a Quit exception, from the same
+ default_quit_handler function shown above. This quit aborts run
+ control handling, breakpoint condition evaluation, etc., and may even
+ leave run control in an inconsistent state.
+
+ The testcase added by this patch illustrates this. The test program
+ just loops a number of times calling the "foo" function.
+
+ The idea is to set a breakpoint in the "foo" function with a condition
+ that sends SIGINT to GDB, and then evaluates to false, which results
+ in the program being re-resumed in the background. The SIGINT-sending
+ emulates pressing Ctrl-C just while GDB was evaluating the breakpoint
+ condition, except, it's more deterministic.
+
+ It looks like this:
+
+ (gdb) p $counter = 0
+ $1 = 0
+ (gdb) b foo if $counter++ == 10 || $_shell("kill -SIGINT `pidof gdb`") != 0
+ Breakpoint 2 at 0x555555555131: file gdb.base/bg-exec-sigint-bp-cond.c, line 21.
+ (gdb) c&
+ Continuing.
+ (gdb)
+
+ After that background continue, the breakpoint should be hit 10 times,
+ and we should see 10 "Quit" being printed on the screen. As if the
+ user typed Ctrl-C on the prompt a number of times with no inferior
+ running:
+
+ (gdb) <<< Ctrl-C
+ (gdb) Quit <<< Ctrl-C
+ (gdb) Quit <<< Ctrl-C
+ (gdb)
+
+ However, here's what you see instead:
+
+ (gdb) c&
+ Continuing.
+ (gdb) Quit
+ (gdb)
+
+ Just one Quit, and nothing else. If we look at the thread's state, we see:
+
+ (gdb) info threads
+ Id Target Id Frame
+ * 1 Thread 0x7ffff7d6f740 (LWP 112192) "bg-exec-sigint-" foo () at gdb.base/bg-exec-sigint-bp-cond.c:21
+
+ So the thread stopped, but we didn't report a stop...
+
+ Issuing another continue shows the same immediate-and-silent-stop:
+
+ (gdb) c&
+ Continuing.
+ (gdb) Quit
+ (gdb) p $counter
+ $2 = 2
+
+ As mentioned, since the run control handling, and breakpoint and
+ watchpoint evaluation, etc. are running in the background from the
+ perspective of the CLI, when users type Ctrl-C in this situation,
+ they're thinking of aborting whatever other command they were typing
+ or running at the prompt, not the run control side, not the previous
+ "c&" command.
+
+ So I think that we should install a custom quit_handler while inside
+ fetch_inferior_event, where we already disable pagination and other
+ things for a similar reason. This custom quit handler does nothing if
+ GDB has the terminal, and forwards Ctrl-C to the inferior otherwise.
+
+ With the patch implementing that, and the same testcase, here's what
+ you see instead:
+
+ (gdb) p $counter = 0
+ $1 = 0
+ (gdb) b foo if $counter++ == 10 || $_shell("kill -SIGINT `pidof gdb`") != 0
+ Breakpoint 2 at 0x555555555131: file gdb.base/bg-exec-sigint-bp-cond.c, line 21.
+ (gdb) c&
+ Continuing.
+ (gdb) Quit
+ (gdb) Quit
+ (gdb) Quit
+ (gdb) Quit
+ (gdb) Quit
+ (gdb) Quit
+ (gdb) Quit
+ (gdb) Quit
+ (gdb) Quit
+ (gdb) Quit
+ (gdb)
+ Breakpoint 2, foo () at gdb.base/bg-exec-sigint-bp-cond.c:21
+ 21 return 0;
+
+ Approved-By: Tom Tromey <tom@tromey.com>
+ Change-Id: I1f10d99496a7d67c94b258e45963e83e439e1778
+
+2023-02-15 Pedro Alves <pedro@palves.net>
+
+ Add new "$_shell(CMD)" internal function
+ For testing a following patch, I wanted a way to send a SIGINT to GDB
+ from a breakpoint condition. And I didn't want to do it from a Python
+ breakpoint or Python function, as I wanted to exercise non-Python code
+ paths. So I thought I'd add a new $_shell internal function, that
+ runs a command under the shell, and returns the exit code. With this,
+ I could write:
+
+ (gdb) b foo if $_shell("kill -SIGINT $gdb_pid") != 0 || <other condition>
+
+ I think this is generally useful, hence I'm proposing it here.
+
+ Here's the new function in action:
+
+ (gdb) p $_shell("true")
+ $1 = 0
+ (gdb) p $_shell("false")
+ $2 = 1
+ (gdb) p $_shell("echo hello")
+ hello
+ $3 = 0
+ (gdb) p $_shell("foobar")
+ bash: line 1: foobar: command not found
+ $4 = 127
+ (gdb) help function _shell
+ $_shell - execute a shell command and returns the result.
+ Usage: $_shell (command)
+ Returns the command's exit code: zero on success, non-zero otherwise.
+ (gdb)
+
+ NEWS and manual changes included.
+
+ Approved-By: Andrew Burgess <aburgess@redhat.com>
+ Approved-By: Tom Tromey <tom@tromey.com>
+ Approved-By: Eli Zaretskii <eliz@gnu.org>
+ Change-Id: I7e36d451ee6b428cbf41fded415ae2d6b4efaa4e
+
+2023-02-15 Pedro Alves <pedro@palves.net>
+
+ Make "ptype INTERNAL_FUNCTION" in Ada print like other languages
+ Currently, printing the type of an internal function in Ada shows
+ double <>s, like:
+
+ (gdb) with language ada -- ptype $_isvoid
+ type = <<internal function>>
+
+ while all other languages print it with a single <>, like:
+
+ (gdb) with language c -- ptype $_isvoid
+ type = <internal function>
+
+ I don't think there's a reason that Ada needs to be different. We
+ currently print the double <>s because we take this path in
+ ada_print_type:
+
+ switch (type->code ())
+ {
+ default:
+ gdb_printf (stream, "<");
+ c_print_type (type, "", stream, show, level, language_ada, flags);
+ gdb_printf (stream, ">");
+ break;
+
+ ... and the type's name already has the <>s.
+
+ Fix this by simply adding an early check for
+ TYPE_CODE_INTERNAL_FUNCTION.
+
+ Approved-By: Andrew Burgess <aburgess@redhat.com>
+ Approved-By: Tom Tromey <tom@tromey.com>
+ Change-Id: Ic2b6527b9240a367471431023f6e27e6daed5501
+ Bug: https://sourceware.org/bugzilla/show_bug.cgi?id=30105
+
+2023-02-15 Pedro Alves <pedro@palves.net>
+
+ Fix "ptype INTERNAL_FUNC" (PR gdb/30105)
+ Currently, looking at the type of an internal function, like below,
+ hits an odd error:
+
+ (gdb) ptype $_isvoid
+ type = <internal function>type not handled in c_type_print_varspec_prefix()
+
+ That is an error thrown from
+ c-typeprint.c:c_type_print_varspec_prefix, where it reads:
+
+ ...
+ case TYPE_CODE_DECFLOAT:
+ case TYPE_CODE_FIXED_POINT:
+ /* These types need no prefix. They are listed here so that
+ gcc -Wall will reveal any types that haven't been handled. */
+ break;
+ default:
+ error (_("type not handled in c_type_print_varspec_prefix()"));
+ break;
+
+ Internal function types have type code TYPE_CODE_INTERNAL_FUNCTION,
+ which is not explicitly handled by that switch.
+
+ That comment quoted above says that gcc -Wall will reveal any types
+ that haven't been handled, but that's not actually true, at least with
+ modern GCCs. You would need to enable -Wswitch-enum for that, which
+ we don't. If I do enable that warning, then I see that we're missing
+ handling for the following type codes:
+
+ TYPE_CODE_INTERNAL_FUNCTION,
+ TYPE_CODE_MODULE,
+ TYPE_CODE_NAMELIST,
+ TYPE_CODE_XMETHOD
+
+ TYPE_CODE_MODULE and TYPE_CODE_NAMELIST and Fortran-specific, so it'd
+ be a little weird to handle them here.
+
+ I tried to reach this code with TYPE_CODE_XMETHOD, but couldn't figure
+ out how to. ptype on an xmethod isn't treated specially, it just
+ complains that the method doesn't exist. I've extended the
+ gdb.python/py-xmethods.exp testcase to make sure of that.
+
+ My thinking is that whatever type code we add next, the most likely
+ scenario is that it won't need any special handling, so we'd just be
+ adding another case to that "do nothing" list. If we do need special
+ casing for whatever type code, I think that tests added at the same
+ time as the feature would uncover it anyhow. If we do miss adding the
+ special casing, then it still looks better to me to print the type
+ somewhat incompletely than to error out and make it harder for users
+ to debug whatever they need. So I think that the best thing to do
+ here is to just remove all those explicit "do nothing" cases, along
+ with the error default case.
+
+ After doing that, I decided to write a testcase that iterates over all
+ supported languages doing "ptype INTERNAL_FUNC". That revealed that
+ Pascal has a similar problem, except the default case hits a
+ gdb_assert instead of an error:
+
+ (gdb) with language pascal -- ptype $_isvoid
+ type =
+ ../../src/gdb/p-typeprint.c:268: internal-error: type_print_varspec_prefix: unexpected type
+ A problem internal to GDB has been detected,
+ further debugging may prove unreliable.
+
+ That is fixed by this patch in the same way.
+
+ You'll notice that the new testcase special-cases the Ada expected
+ output:
+
+ } elseif {$lang == "ada"} {
+ gdb_test "ptype \$_isvoid" "<<internal function>>"
+ } else {
+ gdb_test "ptype \$_isvoid" "<internal function>"
+ }
+
+ That will be subject of the following patch.
+
+ Approved-By: Andrew Burgess <aburgess@redhat.com>
+ Change-Id: I81aec03523cceb338b5180a0b4c2e4ad26b4c4db
+ Bug: https://sourceware.org/bugzilla/show_bug.cgi?id=30105
+
+2023-02-15 Simon Marchi <simon.marchi@efficios.com>
+
+ gdb/dwarf2: split .debug_names reading code to own file
+ Move everything related to reading .debug_names from read.c to
+ read-debug-names.c. The only entry point exposed by
+ read-debug-names.{c,h} is dwarf2_read_debug_names.
+
+ Change-Id: I18b23f3c7a61b14abc3a46e4bf559bc2d078e8bc
+ Approved-By: Tom Tromey <tom@tromey.com>
+
+2023-02-15 Simon Marchi <simon.marchi@efficios.com>
+
+ gdb/dwarf2: split .gdb_index reading code to own file
+ Move everything related to reading .gdb_index from read.c to
+ read-gdb-index.c. The only entry point exposed by read-gdb-index.{c,h}
+ is dwarf2_read_gdb_index.
+
+ Change-Id: I1e32c8f0720086538de8d2f612f27545377099bc
+ Approved-By: Tom Tromey <tom@tromey.com>
+
+2023-02-15 Simon Marchi <simon.marchi@polymtl.ca>
+
+ gdb/dwarf2: move some things to read.h
+ The following 2 patches move .gdb_index and .debug_names reading code to
+ their own file. Prepare this by exposing some things used by that code
+ to read.h.
+
+ Change-Id: If8ef135758a2ff0ab3b765cc92596da8189f3bbd
+ Approved-By: Tom Tromey <tom@tromey.com>
+
+2023-02-15 Simon Marchi <simon.marchi@efficios.com>
+
+ gdb: fix dealloc function not being called for frame 0
+ Tom de Vries reported [1] a regression in gdb.btrace/record_goto.exp
+ caused by 6d3717d4c4 ("gdb: call frame unwinders' dealloc_cache methods
+ through destroying the frame cache"). This issue is caught by ASan. On
+ a non-ASan build, it may or may not cause a crash or some other issue, I
+ haven't tried.
+
+ I managed to narrow it down to:
+
+ $ ./gdb -nx -q --data-directory=data-directory testsuite/outputs/gdb.btrace/record_goto/record_goto -ex "start" -ex "record btrace" -ex "next"
+
+ ... and then doing repeatedly "record goto 19" and "record goto 27".
+ Eventually, I get:
+
+ (gdb) record goto 27
+ =================================================================
+ ==1527735==ERROR: AddressSanitizer: heap-use-after-free on address 0x6210003392a8 at pc 0x55e4c26eef86 bp 0x7ffd229f24e0 sp 0x7ffd229f24d8
+ READ of size 8 at 0x6210003392a8 thread T0
+ #0 0x55e4c26eef85 in bfcache_eq /home/simark/src/binutils-gdb/gdb/record-btrace.c:1639
+ #1 0x55e4c37cdeff in htab_find_slot_with_hash /home/simark/src/binutils-gdb/libiberty/hashtab.c:659
+ #2 0x55e4c37ce24a in htab_find_slot /home/simark/src/binutils-gdb/libiberty/hashtab.c:703
+ #3 0x55e4c26ef0c6 in bfcache_new /home/simark/src/binutils-gdb/gdb/record-btrace.c:1653
+ #4 0x55e4c26f1242 in record_btrace_frame_sniffer /home/simark/src/binutils-gdb/gdb/record-btrace.c:1820
+ #5 0x55e4c1b926a1 in frame_unwind_try_unwinder /home/simark/src/binutils-gdb/gdb/frame-unwind.c:136
+ #6 0x55e4c1b930d7 in frame_unwind_find_by_frame(frame_info_ptr, void**) /home/simark/src/binutils-gdb/gdb/frame-unwind.c:196
+ #7 0x55e4c1bb867f in get_frame_type(frame_info_ptr) /home/simark/src/binutils-gdb/gdb/frame.c:2925
+ #8 0x55e4c2ae6798 in print_frame_info(frame_print_options const&, frame_info_ptr, int, print_what, int, int) /home/simark/src/binutils-gdb/gdb/stack.c:1049
+ #9 0x55e4c2ade3e1 in print_stack_frame(frame_info_ptr, int, print_what, int) /home/simark/src/binutils-gdb/gdb/stack.c:367
+ #10 0x55e4c26fda03 in record_btrace_set_replay /home/simark/src/binutils-gdb/gdb/record-btrace.c:2779
+ #11 0x55e4c26fddc3 in record_btrace_target::goto_record(unsigned long) /home/simark/src/binutils-gdb/gdb/record-btrace.c:2843
+ #12 0x55e4c2de2bb2 in target_goto_record(unsigned long) /home/simark/src/binutils-gdb/gdb/target.c:4169
+ #13 0x55e4c275ed98 in record_goto(char const*) /home/simark/src/binutils-gdb/gdb/record.c:372
+ #14 0x55e4c275edba in cmd_record_goto /home/simark/src/binutils-gdb/gdb/record.c:383
+
+ 0x6210003392a8 is located 424 bytes inside of 4064-byte region [0x621000339100,0x62100033a0e0)
+ freed by thread T0 here:
+ #0 0x7f6ca34a5b6f in __interceptor_free ../../../../src/libsanitizer/asan/asan_malloc_linux.cpp:123
+ #1 0x55e4c38a4c17 in rpl_free /home/simark/src/binutils-gdb/gnulib/import/free.c:44
+ #2 0x55e4c1bbd378 in xfree<void> /home/simark/src/binutils-gdb/gdb/../gdbsupport/gdb-xfree.h:37
+ #3 0x55e4c37d1b63 in call_freefun /home/simark/src/binutils-gdb/libiberty/obstack.c:103
+ #4 0x55e4c37d25a2 in _obstack_free /home/simark/src/binutils-gdb/libiberty/obstack.c:280
+ #5 0x55e4c1bad701 in reinit_frame_cache() /home/simark/src/binutils-gdb/gdb/frame.c:2112
+ #6 0x55e4c27705a3 in registers_changed_ptid(process_stratum_target*, ptid_t) /home/simark/src/binutils-gdb/gdb/regcache.c:564
+ #7 0x55e4c27708c7 in registers_changed_thread(thread_info*) /home/simark/src/binutils-gdb/gdb/regcache.c:573
+ #8 0x55e4c26fd922 in record_btrace_set_replay /home/simark/src/binutils-gdb/gdb/record-btrace.c:2772
+ #9 0x55e4c26fddc3 in record_btrace_target::goto_record(unsigned long) /home/simark/src/binutils-gdb/gdb/record-btrace.c:2843
+ #10 0x55e4c2de2bb2 in target_goto_record(unsigned long) /home/simark/src/binutils-gdb/gdb/target.c:4169
+ #11 0x55e4c275ed98 in record_goto(char const*) /home/simark/src/binutils-gdb/gdb/record.c:372
+ #12 0x55e4c275edba in cmd_record_goto /home/simark/src/binutils-gdb/gdb/record.c:383
+
+ previously allocated by thread T0 here:
+ #0 0x7f6ca34a5e8f in __interceptor_malloc ../../../../src/libsanitizer/asan/asan_malloc_linux.cpp:145
+ #1 0x55e4c0b55c60 in xmalloc /home/simark/src/binutils-gdb/gdb/alloc.c:57
+ #2 0x55e4c37d1a6d in call_chunkfun /home/simark/src/binutils-gdb/libiberty/obstack.c:94
+ #3 0x55e4c37d1c20 in _obstack_begin_worker /home/simark/src/binutils-gdb/libiberty/obstack.c:141
+ #4 0x55e4c37d1ed7 in _obstack_begin /home/simark/src/binutils-gdb/libiberty/obstack.c:164
+ #5 0x55e4c1bad728 in reinit_frame_cache() /home/simark/src/binutils-gdb/gdb/frame.c:2113
+ #6 0x55e4c27705a3 in registers_changed_ptid(process_stratum_target*, ptid_t) /home/simark/src/binutils-gdb/gdb/regcache.c:564
+ #7 0x55e4c27708c7 in registers_changed_thread(thread_info*) /home/simark/src/binutils-gdb/gdb/regcache.c:573
+ #8 0x55e4c26fd922 in record_btrace_set_replay /home/simark/src/binutils-gdb/gdb/record-btrace.c:2772
+ #9 0x55e4c26fddc3 in record_btrace_target::goto_record(unsigned long) /home/simark/src/binutils-gdb/gdb/record-btrace.c:2843
+ #10 0x55e4c2de2bb2 in target_goto_record(unsigned long) /home/simark/src/binutils-gdb/gdb/target.c:4169
+ #11 0x55e4c275ed98 in record_goto(char const*) /home/simark/src/binutils-gdb/gdb/record.c:372
+ #12 0x55e4c275edba in cmd_record_goto /home/simark/src/binutils-gdb/gdb/record.c:383
+
+ The problem is a stale entry in the bfcache hash table (in
+ record-btrace.c), left across a reinit_frame_cache. This entry points
+ to something that used to be allocated on the frame obstack, that has
+ since been wiped by reinit_frame_cache.
+
+ Before the aforementioned, unwinder deallocation functions were called
+ by iterating on the frame chain, starting with the sentinel frame, like
+ so:
+
+ /* Tear down all frame caches. */
+ for (frame_info *fi = sentinel_frame; fi != NULL; fi = fi->prev)
+ {
+ if (fi->prologue_cache && fi->unwind->dealloc_cache)
+ fi->unwind->dealloc_cache (fi, fi->prologue_cache);
+ if (fi->base_cache && fi->base->unwind->dealloc_cache)
+ fi->base->unwind->dealloc_cache (fi, fi->base_cache);
+ }
+
+ After that patch, we relied on the fact that all frames are (supposedly)
+ in the frame_stash. A deletion function was added to the frame_stash
+ hash table, so that dealloc functions would be called when emptying the
+ frame stash. There is one case, however, where a frame_info is not in
+ the frame stash. That is when we create the frame_info for the current
+ frame (level 0, unwound from the sentinel frame), but don't compute its
+ frame id. The computation of the frame id for that frame (and only that
+ frame, AFAIK) is done lazily. And putting a frame_info in the frame stash
+ requires knowing its id. So a frame 0 whose frame id is not computed
+ yet is necessarily not in the frame stash.
+
+ When replaying with btrace, record_btrace_frame_sniffer insert entries
+ corresponding to frames in the "bfcache" hash table. It then relies on
+ record_btrace_frame_dealloc_cache being called for each frame to remove
+ all those entries when the frames get invalidated. If a frame reinit
+ happens while frame 0's id is not computed (and therefore that frame is
+ not in frame_stash), record_btrace_frame_dealloc_cache does not get
+ called for it, and it leaves a stale entry in bfcache. That then leads
+ to a use-after-free when that entry is accessed later, which ASan
+ catches.
+
+ The proposed solution is to explicitly call frame_info_del on frame 0,
+ if it exists, and if its frame id is not computed. If its frame id is
+ computed, it is expected that it will be in the frame stash, so it will
+ be "deleted" through that.
+
+ [1] https://inbox.sourceware.org/gdb-patches/20230130200249.131155-1-simon.marchi@efficios.com/T/#mcf1340ce2906a72ec7ed535ec0c97dba11c3d977
+
+ Reported-By: Tom de Vries <tdevries@suse.de>
+ Tested-By: Tom de Vries <tdevries@suse.de>
+ Change-Id: I2351882dd511f3bbc01e4152e9db13b69b3ba384
+
+2023-02-15 Tom Tromey <tom@tromey.com>
+
+ Remove RETURNS from BFD chew comments
+ When reading the BFD manual, I noticed text like this:
+
+ -- Function: bool bfd_close (bfd *abfd);
+ Close a BFD. If the BFD was open for writing, then pending
+ operations are completed and the file written out and closed. If
+ ...
+ *Returns*
+ 'TRUE' is returned if all is ok, otherwise 'FALSE'.
+
+ The *Returns*, like the *Synopsis* in the earlier patch, is
+ un-info-like. It's also used inconsistently.
+
+ This patch removes all the uses of the RETURNS word and removes it
+ entirely from the chew scripts. Now this example reads:
+
+ -- Function: bool bfd_close (bfd *abfd);
+ Close a BFD. If the BFD was open for writing, then pending
+ operations are completed and the file written out and closed. If
+ ...
+ 'TRUE' is returned if all is ok, otherwise 'FALSE'.
+
+ In a few cases I had to slightly reword the comment. There were also
+ a couple of cases where there was redundant text. In these cases I
+ just dropped the RETURNS copy.
+
+ 2023-02-07 Tom Tromey <tom@tromey.com>
+
+ * bfd.c, cache.c, compress.c, opncls.c: Remove RETURNS from
+ documentation comments.
+ * doc/doc.str, doc/proto.str (RETURNS): Remove.
+
+2023-02-15 Tom Tromey <tom@tromey.com>
+
+ Use @deftypefn in chew output
+ When reading the BFD info manual, function definitions looked very
+ strange to me:
+
+ *Synopsis*
+ long bfd_get_mtime (bfd *abfd);
+ *Description*
+ Return the file modification time (as read from the file system, or from
+ the archive header for archive members).
+
+ The *Synopsis* and *Description* text in particular is very un-info-like.
+
+ To fix this, I tried removing the *Synopsis* text and having FUNCTION
+ use @deftypefn instead. However, this ended up requiring some new
+ state, because SYNOPSIS can appear without FUNCTION. This in turn
+ required "catstrif" (I considered adding FORTH-style if-else-then, but
+ in the end decided on an ad hoc approach).
+
+ After this the result looks like:
+
+ -- Function: long bfd_get_mtime (bfd *abfd);
+ Return the file modification time (as read from the file system, or
+ from the archive header for archive members).
+
+ This patch also reorders a few documentation comments to ensure that
+ SYNOPSIS comes before DESCRIPTION. This is the more common style and
+ is also now required by doc.str.
+
+ 2023-02-07 Tom Tromey <tom@tromey.com>
+
+ * syms.c (bfd_decode_symclass, bfd_is_undefined_symclass)
+ (bfd_symbol_info): Reorder documentation comment.
+ * doc/doc.str (synopsis_seen): New variable.
+ (SYNOPSIS): Set synopsis_seen. Emit @deftypefn.
+ (DESCRIPTION): Use synopsis_seen.
+ * doc/chew.c (catstrif): New function.
+ (main): Add catstrif intrinsic.
+ (compile): Recognize "variable" command.
+
+2023-02-15 Tom Tromey <tom@tromey.com>
+
+ Change internalmode to be an intrinsic variable
+ Currently, internalmode is a special word to set an internal state
+ variable. Because this series adds variables anyway, change this to
+ be a variable instead.
+
+ I saw some commits in the history that made sure that chew did not
+ leak memory, so I put some extra effort into trying to handle this for
+ variables as well.
+
+ 2023-02-07 Tom Tromey <tom@tromey.com>
+
+ * doc/proto.str (external, internal, ifinternal, ENUMEQ, ENUMDOC):
+ Update.
+ * doc/chew.c (internalmode): Remove.
+ (add_intrinsic_variable): New function.
+ (main): Add internalmode as intrinsic.
+ (internal_mode): Remove global.
+ (maybecatstr): Update.
+ (free_words): Free variables.
+
+2023-02-15 Tom Tromey <tom@tromey.com>
+
+ Use intptr_t rather than long in chew
+ To implement variables in chew, it's convenient to have a
+ pointer-sized integer on the stack. To this end, use intptr_t rather
+ than long.
+
+ 2023-02-07 Tom Tromey <tom@tromey.com>
+
+ * doc/chew.c (pcu) <l>: Now intptr_t.
+ (internal_mode, istack, isp): Likewise.
+ (bang, atsign): Use intptr_t.
+
+2023-02-15 Tom Tromey <tom@tromey.com>
+
+ Remove the paramstuff word
+ The chew "paramstuff" word has been a no-op since:
+
+ commit c58b95236ce4c9345c4fa76e7ef16762e5229380
+ Author: Alan Modra <amodra@gmail.com>
+ Date: Sun Jun 29 10:06:40 2003 +0000
+
+ Convert to C90 and a few tweaks.
+
+ Remove it and its one use.
+
+ 2023-02-07 Tom Tromey <tom@tromey.com>
+
+ * doc/proto.str (SYNOPSIS): Don't use paramstuff.
+ * doc/chew.c (paramstuff): Remove.
+ (main): Don't add paramstuff intrinsic.
+
+2023-02-15 Tom Tromey <tom@tromey.com>
+
+ Add copyright headers to the .str files
+ The .str script files don't have copyright headers, but I think they
+ should. I used the same dates that chew.c uses, which I think makes
+ sense because these are inputs to chew.
+
+ 2023-02-07 Tom Tromey <tom@tromey.com>
+
+ * doc/doc.str, doc/proto.str: Add copyright header.
+
+2023-02-15 Tom Tromey <tom@tromey.com>
+
+ Simplify @node use in BFD documentation
+ The BFD docs currently specify all the parameters to @node. However,
+ this results in bad navigation in certain nodes -- the "space" command
+ in info doesn't know how to find the next node.
+
+ I think this style of @node is a leftover from ancient times.
+ Makeinfo can figure out the node structure on its own now, so simplify
+ everything to a single-argument @node.
+
+ 2023-02-07 Tom Tromey <tom@tromey.com>
+
+ * doc/webassembly.texi (File layout): Remove second argument from
+ @node.
+ * doc/bfd.texi: Use single-argument @node everywhere.
+
+2023-02-15 Tom Tromey <tom@tromey.com>
+
+ Remove H_CFLAGS from doc/local.mk
+ I couldn't see that H_CFLAGS is defined anywhere, so remove it.
+
+ 2023-02-07 Tom Tromey <tom@tromey.com>
+
+ * Makefile.in: Rebuild.
+ * doc/local.mk (%D%/chew.stamp): Don't use H_CFLAGS.
+
+2023-02-15 Simon Marchi <simon.marchi@efficios.com>
+
+ gdb: store internalvars in an std::map
+ In a test downstream in ROCgdb, we had a test case failing when
+ GDB_REVERSE_INIT_FUNCTIONS was set. The test was assuming a particular
+ order in the output of "show convenience". And the order changes when
+ running with GDB_REVERSE_INIT_FUNCTIONS.
+
+ I think that a nice way to fix it is to make the output of "show
+ convenience" sorted, and therefore stable. Ideally, I think that the
+ the user-visible behavior of GDB should not change when using
+ GDB_REVERSE_INIT_FUNCTIONS. Plus, it makes the output of "show
+ convenience" look nice, not that it's really important.
+
+ Implement this by storing the internal vars in an std::map, which is a
+ sorted container.
+
+ Change-Id: I1fca7e7877cc984a3a3432c7639d45e68d437241
+ Approved-By: Tom Tromey <tom@tromey.com>
+
+2023-02-15 Simon Marchi <simon.marchi@efficios.com>
+
+ gdb: add constructor to internalvar
+ Add a constructor that takes the name as a parameter. Initialize the
+ next and kind fields inline.
+
+ Change-Id: Ic4db0aba85f1da9f12f3eee0ac62c0e5ef0cfe88
+ Approved-By: Tom Tromey <tom@tromey.com>
+
+2023-02-15 Simon Marchi <simon.marchi@efficios.com>
+
+ gdb: use std::string for internalvar::name
+ Change internalvar::name to std::string, automating memory management.
+ It becomes necessary to allocate internalvar with new instead of XNEW.
+
+ I didn't find how to trigger the code in complete_internalvar. It is
+ called from condition_completer, so it should be by using the
+ "condition" command, but I never managed to get in the right code path.
+
+ Change-Id: I814d61361663e7becb8f3fb5f58c0180cdc414bc
+ Approved-By: Tom Tromey <tom@tromey.com>
+
+2023-02-15 Tom Tromey <tromey@adacore.com>
+
+ Do not record a rejected target description
+ When connecting to a certain target, gdb issues a warning about the
+ target description:
+
+ (gdb) target remote localhost:7947
+ Remote debugging using localhost:7947
+ warning: Architecture rejected target-supplied description
+
+ If you then kill the inferior and change the exec-file, this will
+ happen:
+
+ (gdb) file bar
+ Architecture of file not recognized.
+
+ After this, debugging doesn't work very well.
+
+ What happens here is that, despite the warning,
+ target_find_description records the downloaded description in the
+ target_desc_info. Then the "file" command ends up calling
+ set_gdbarch_from_file, which uses that description.
+
+ It seems to me that, because the architecture rejected the
+ description, it should not be used. That is what this patch
+ implements.
+
+2023-02-15 Pedro Alves <pedro@palves.net>
+
+ gdb/manual: Move @findex entries
+ The manual currently has many cases like these:
+
+ @item $_gdb_setting_str (@var{setting})
+ @findex $_gdb_setting_str@r{, convenience function}
+
+ As suggested by Eli, move the @findex entries before @item so that the
+ index records the position of @item, and the Info reader places you
+ there when you use index-search.
+
+ I went over all @findex calls in the manual, and most are like the
+ above. Most either appear before @item, or before @subheading, like:
+
+ @subheading The @code{-break-after} Command
+ @findex -break-after
+
+ I fixed all of them.
+
+ There are findex entries in annotate.texinfo,python.texi, and
+ stabs.texinfo as well, though those all look right to me already.
+
+ Tested by typing "i _isvoid" (@item case) and "i -complete"
+ (@subheading case) in an Info reader, and checking where those took
+ me.
+
+ Change-Id: Idb6903b0bb39ff03f93524628dcef86b5585c97e
+ Suggested-By: Eli Zaretskii <eliz@gnu.org>
+
+2023-02-15 Alan Modra <amodra@gmail.com>
+
+ objdump read_section_stabs
+ This function is used to read sections other than stabs, and there is
+ now another version of it that extracts different info from the bfd
+ section. Rename it and return the bfd section instead of assorted
+ fields of the bfd section.
+
+ * objcopy.c (read_section): Renamed from read_section_stabs.
+ Delete size_ptr and entsize_ptr params, add contents param.
+ Return asection pointer. Don't unnecessarily free contents on
+ failure from bfd_malloc_and_get_section.
+ (find_stabs_section): Use read_section.
+ (dump_ctf, dump_section_sframe): Likewise.
+ (read_section_sframe): Delete.
+
+2023-02-15 Alan Modra <amodra@gmail.com>
+
+ objdump -G memory leak
+ * objdump.c (find_stabs_section): Free stabs.
+
+2023-02-15 Nick Clifton <nickc@redhat.com>
+
+ Fix the linker's merge4 test for the HPPA architecture.
+ PR 30078 * testsuite/ld-elf/merge4b.s: Use .asciz instead of .string in order to avoid the special behaviour of the .string directive on HPPA architectures.
+
+2023-02-15 Felix Willgerodt <felix.willgerodt@intel.com>
+
+ gdb, fortran: Fix quad floating-point type for ifort compiler.
+ I fixed this a while ago for ifx, one of the two Intel compilers, in
+ 8d624a9d8050ca96e154215c7858ac5c2d8b0b19.
+
+ Apparently I missed that the older ifort Intel compiler actually emits
+ slightly different debug info again:
+
+ 0x0000007a: DW_TAG_base_type
+ DW_AT_byte_size (0x20)
+ DW_AT_encoding (DW_ATE_complex_float)
+ DW_AT_name ("COMPLEX(16)")
+
+ 0x00000081: DW_TAG_base_type
+ DW_AT_byte_size (0x10)
+ DW_AT_encoding (DW_ATE_float)
+ DW_AT_name ("REAL(16)")
+
+ This fixes two failures in gdb.fortran/complex.exp with ifort.
+
+ Approved-By: Tom Tromey <tom@tromey.com>
+
+2023-02-15 Jan Beulich <jbeulich@suse.com>
+
+ gas: buffer_and_nest() needs to pass nul-terminated string to temp_ilp()
+ In 7545aa2dd2eb ("gas: improve interaction between read_a_source_file()
+ and s_linefile()") I didn't pay attention to the dual purpose of the
+ nul character previously used. This was to a fair degree because of the
+ open-coding of certain operations. Insert the earlier found line
+ terminator instead of a hard-coded newline, and do so early in this
+ special case (bypassing the later general insertion point). Plus
+ properly use sb_terminate() to mark the end of the string. (Note that
+ saved_eol_char was misnamed: Without calling sb_terminate() there's
+ simply random data at that position in the buffer.)
+
+2023-02-15 Alan Modra <amodra@gmail.com>
+
+ More ecoff sanity checks
+ Change FIX so that unused pointers that escape the UPDATE_RAW_END
+ sanity checks won't result in overflows. Also sanity check the local
+ sym fdr isymBase and csym values.
+
+ * ecoff.c (_bfd_ecoff_slurp_symbolic_info): Define FIX to set
+ pointers into swapped internal data to NULL if count is zero.
+ Sanity check local sym fdr_ptr->isymBase and fdr_ptr->csym.
+
+2023-02-15 Alan Modra <amodra@gmail.com>
+
+ binutils stabs type list
+ Fuzzers have found that specifying a large stab type number results in
+ lots of memory being requested, as the list is extended with a 16
+ element array at a time until we reach the given stab type. It also
+ takes a long time. Of course normal sane stab types use small
+ positive integers, but it's not hard to modify the code to handle type
+ numbers starting anyhere.
+
+ * stabs.c (struct stab_types): Add base_index.
+ (stab_find_slot): Simplify filenum check. Delete type number
+ check. Don't allocate entire array from 0 to type number,
+ allocate a sparse array.
+
+2023-02-15 GDB Administrator <gdbadmin@sourceware.org>
+
+ Automatic date update in version.in
+
+2023-02-14 Tom Tromey <tom@tromey.com>
+
+ Remove a use of pagination_enabled
+ I noticed that the TUI temporarily sets pagination_enabled and
+ gdb_stdout in one spot. However, I don't believe these settings are
+ necessary here, as a ui_file is passed to
+ gdbarch_print_registers_info. This patch removes these settings.
+
+2023-02-14 Simon Marchi <simon.marchi@polymtl.ca>
+
+ gdb/dwarf2: rename some things, index -> gdb_index
+ This renaming helps make it clearer that these entites (classes,
+ functions) are specific to .gdb_index only, they are not shared with the
+ .debug_names handling.
+
+ Change-Id: I1a3cf3dbf450b62d1a0879d9aedd26397abdfd13
+ Approved-By: Tom Tromey <tom@tromey.com>
+
+2023-02-14 Simon Marchi <simon.marchi@efficios.com>
+
+ gdb: cast return value of std::unique_ptr::release to void
+ My editor shows warnings like:
+
+ value.c:2784: warning: The value returned by this function should be used
+ value.c:2784: note: cast the expression to void to silence this warning [bugprone-unused-return-value]
+
+ These warnings come from clangd, so ultimately from one of the clang
+ static analyzers (probably clang-tidy).
+
+ Silence these warnings by casting to void. Add a comment to explain
+ why this unusual thing is done.
+
+ Change-Id: I58323959c0baf9f1b20a8d596e4c58dc77c6809a
+ Approved-By: Tom Tromey <tom@tromey.com>
+
+2023-02-14 Simon Marchi <simon.marchi@efficios.com>
+
+ gdb: remove unnecessary tui directory check in configure
+ I suppose this was possible in the CVS days for the tui directory to be
+ missing, but it's not really possible nowaday. Well, a user could
+ delete the directory from their source tree but... it doesn't make
+ sense. Remove the check for that directory in configure.
+
+ Change-Id: Iea1412f5e5482ed003015030132ec22150c7d0b3
+ Approved-By: Tom Tromey <tom@tromey.com>
+
+2023-02-14 Tom Tromey <tromey@adacore.com>
+
+ Do not cast away const in agent_run_command
+ While investigating something else, I noticed some weird code in
+ agent_run_command (use of memcpy rather than strcpy). Then I noticed
+ that 'cmd' is used as both an in and out parameter, despite being
+ const.
+
+ Casting away const like this is bad. This patch removes the const and
+ fixes the memcpy. I also added a static assert to assure myself that
+ the code in gdbserver is correct -- gdbserver is passing its own
+ buffer directly to agent_run_command.
+
+ Reviewed-By: Andrew Burgess <aburgess@redhat.com>
+
+2023-02-14 Tom de Vries <tdevries@suse.de>
+
+ [gdb/testsuite] Add xfail in gdb.python/py-record-btrace.exp
+ There's a HW bug affecting Processor Trace on some Intel processors
+ (Ice Lake to Raptor Lake microarchitectures).
+
+ The bug was exposed by linux kernel commit 670638477aed
+ ("perf/x86/intel/pt: Opportunistically use single range output mode"),
+ added in version v5.5.0, and was worked around by commit ce0d998be927
+ ("perf/x86/intel/pt: Fix sampling using single range output") in version
+ 6.1.0.
+
+ The bug manifests (on a Performance-core of an i7-1250U, an Alder Lake cpu) in
+ a single test-case:
+ ...
+ (gdb) python insn = r.instruction_history^M
+ warning: Decode error (-20) at instruction 33 (offset = 0x3d6a, \
+ pc = 0x400501): compressed return without call.^M
+ (gdb) FAIL: gdb.python/py-record-btrace.exp: prepare record: \
+ python insn = r.instruction_history
+ ...
+
+ Add a corresponding XFAIL.
+
+ Note that the i7-1250U has both Performance-cores and Efficient-cores, and on
+ an Efficient-Core the test-case runs without any problems, so if the testsuite
+ run is not pinned to a specific cpu, the test may either PASS or XFAIL.
+
+ Tested on x86_64-linux:
+ - openSUSE Leap 15.4 with linux kernel version 5.14.21
+ - openSUSE Tumbleweed with linux kernel version 6.1.8
+
+ PR testsuite/30075
+ Bug: https://sourceware.org/bugzilla/show_bug.cgi?id=30075
+
+2023-02-14 Nick Clifton <nickc@redhat.com>
+
+ Mention that the -plugin command line option is used to load plugins.
+
+2023-02-14 Tom de Vries <tdevries@suse.de>
+
+ [gdb/testsuite] Factor out proc linux_kernel_version
+ Factor out new proc linux_kernel_version from test-case
+ gdb.arch/i386-pkru.exp.
+
+ Tested on x86_64-linux.
+
+2023-02-14 Ulf Samuelsson <ulf@emagii.com>
+
+ ASCIZ Command for output section
+ Adds a new directive to the linker script syntax: ASCIZ.
+ This inserts a zero-terminated string into the output at the place where it is used.
+
+2023-02-14 Jan Beulich <jbeulich@suse.com>
+
+ gas: correct symbol name comparison in .startof./.sizeof. handling
+ In 162c6aef1f3a ("gas: fold symbol table entries generated for
+ .startof.() / .sizeof.()") I screwed up quite badly, inverting the case
+ sensitive and case insensitive comparison functions.
+
+ x86: {LD,ST}TILECFG use an extension opcode
+ It being zero and happening to work right now doesn't mean the insns
+ shouldn't be spelled out properly.
+
+2023-02-14 Jan Beulich <jbeulich@suse.com>
+
+ gas: improve interaction between read_a_source_file() and s_linefile()
+ read_a_source_file() would bump line numbers only when seeing a newline,
+ whereas is_end_of_line[] indicates further end-of-line characters, in
+ particular the nul character. s_linefile() attempts to compensate for
+ the bump, but was too aggressive with this so far: It should only adjust
+ when a newline ends the line. To facilitate such a check, the check for
+ nothing else on the line needs to move ahead, which luckily is easily
+ possible: The relevant two conditions match, and the function can
+ simply return from the body of that earlier instance of the conditional.
+
+ The more strict treatment in s_linefile() then requires an adjustment
+ to buffer_and_nest()'s invocation of the function: The line terminator
+ now needs to be a newline, not nul.
+
+2023-02-14 Tom Tromey <tom@tromey.com>
+
+ Fix build bug in ppc-linux-nat.c
+ The buildbot pointed out that my value refactoring series introduced a
+ bug in ppc-linux-nat.c:
+
+ ../../binutils-gdb/gdb/ppc-linux-nat.c: In member function ‘int ppc_linux_nat_target::num_memory_accesses(const std::vector<gdb::ref_ptr<value, value_ref_policy> >&)’:
+ ../../binutils-gdb/gdb/ppc-linux-nat.c:2458:44: error: expected unqualified-id before ‘->’ token
+ 2458 | if (VALUE_LVAL (v) == not_lval || v->->deprecated_modifiable () == 0)
+
+ I don't know how that happened, but I am checking in this patch which
+ I think should fix it. It just removes the second "->".
+
+ I can't readily test this, so perhaps there's another bug lurking
+ after this one.
+
+2023-02-14 GDB Administrator <gdbadmin@sourceware.org>
+
+ Automatic date update in version.in
+
+2023-02-13 Tom Tromey <tom@tromey.com>
+
+ Rely on value_ref_ptr::operator->
+ Simon pointed out some spots were doing val.get()->mumble, where val
+ is a value_ref_ptr. These were introduced by the function-to-method
+ script, replacing older code that passed the result of .get() to a
+ function.
+
+ Now that value.h is using methods, we can instead rely on operator->.
+ This patch replaces all the newly-introduced instances of this.
+
+ Approved-By: Simon Marchi <simon.marchi@efficios.com>
+
+2023-02-13 Tom Tromey <tom@tromey.com>
+
+ Remove deprecated_lval_hack
+ This removes deprecated_lval_hack and the VALUE_LVAL macro, replacing
+ all uses with a call to value::lval.
+
+ Approved-By: Simon Marchi <simon.marchi@efficios.com>
+
+2023-02-13 Tom Tromey <tom@tromey.com>
+
+ Introduce set_lval method on value
+ This introduces the set_lval method on value, one step toward removing
+ deprecated_lval_hack. Ultimately I think the goal should be for some
+ of these set_* methods to be replaced with constructors; but I haven't
+ done this, as the series is already too long. Other 'deprecated'
+ methods can probably be handled the same way.
+
+ Approved-By: Simon Marchi <simon.marchi@efficios.com>
+
+2023-02-13 Tom Tromey <tom@tromey.com>
+
+ Make ~value private
+ At the end of this series, I belatedly realized that values should
+ only be destroyed by value_decref. This patch marks the the
+ destructor private to enforce this.
+
+ Approved-By: Simon Marchi <simon.marchi@efficios.com>
+
+2023-02-13 Tom Tromey <tom@tromey.com>
+
+ Make struct value data members private
+ This hoists the 'private' in struct value to also encompass the data
+ members.
+
+ Approved-By: Simon Marchi <simon.marchi@efficios.com>
+
+2023-02-13 Tom Tromey <tom@tromey.com>
+
+ Turn record_latest_value into a method
+ record_latest_value now access some internals of struct value, so turn
+ it into a method.
+
+ Approved-By: Simon Marchi <simon.marchi@efficios.com>
+
+2023-02-13 Tom Tromey <tom@tromey.com>
+
+ Add value::set_modifiable
+ This introduces a value::set_modifiable and changes a couple of spots
+ to use it.
+
+ I'm not completely sure the comments by deprecated_modifiable are
+ correct any more. Perhaps they should be removed and the method
+ renamed. Like so many before me, though, I've deferred investigation
+ of the issue.
+
+ Approved-By: Simon Marchi <simon.marchi@efficios.com>
+
+2023-02-13 Tom Tromey <tom@tromey.com>
+
+ Turn various value copying-related functions into methods
+ This patch turns a grab bag of value functions to methods of value.
+ These are done together because their implementations are
+ interrelated.
+
+ Approved-By: Simon Marchi <simon.marchi@efficios.com>
+
+2023-02-13 Tom Tromey <tom@tromey.com>
+
+ Turn preserve_one_value into method
+ This changes preserve_one_value to be a method of value. Much of this
+ patch was written by script.
+
+ Approved-By: Simon Marchi <simon.marchi@efficios.com>
+
+2023-02-13 Tom Tromey <tom@tromey.com>
+
+ Turn some xmethod functions into methods
+ This turns value_from_xmethod, result_type_of_xmethod, and
+ call_xmethod to be methods of value. value_from_xmethod is a static
+ "constructor" now.
+
+ Approved-By: Simon Marchi <simon.marchi@efficios.com>
+
+2023-02-13 Tom Tromey <tom@tromey.com>
+
+ Change some code to use value methods
+ A few functions in value.c were accessing the internal fields of
+ struct value. However, in these cases it seemed simpler to change
+ them to use the public API rather than convert them to be methods.
+
+ Approved-By: Simon Marchi <simon.marchi@efficios.com>
+
+2023-02-13 Tom Tromey <tom@tromey.com>
+
+ Turn set_value_component_location into method
+ This turns set_value_component_location into a method of value.
+
+ Approved-By: Simon Marchi <simon.marchi@efficios.com>
+
+2023-02-13 Tom Tromey <tom@tromey.com>
+
+ Turn value_non_lval and value_force_lval into methods
+ This changes value_non_lval and value_force_lval to be methods of
+ value.
+
+ Approved-By: Simon Marchi <simon.marchi@efficios.com>
+
+2023-02-13 Tom Tromey <tom@tromey.com>
+
+ Turn many optimized-out value functions into methods
+ This turns many functions that are related to optimized-out or
+ availability-checking to be methods of value. The static function
+ value_entirely_covered_by_range_vector is also converted to be a
+ private method.
+
+ Approved-By: Simon Marchi <simon.marchi@efficios.com>
+
+2023-02-13 Tom Tromey <tom@tromey.com>
+
+ Turn value_copy into a method
+ This turns value_copy into a method of value. Much of this was
+ written by script.
+
+ Approved-By: Simon Marchi <simon.marchi@efficios.com>
+
+2023-02-13 Tom Tromey <tom@tromey.com>
+
+ Fully qualify calls to copy in value.c
+ A coming patch will add value::copy, so this namespace-qualifies
+ existing calls to 'copy' in value.c, to ensure it will still compile
+ after that change is done.
+
+ Approved-By: Simon Marchi <simon.marchi@efficios.com>
+
+2023-02-13 Tom Tromey <tom@tromey.com>
+
+ Turn remaining value_contents functions into methods
+ This turns the remaining value_contents functions -- value_contents,
+ value_contents_all, value_contents_for_printing, and
+ value_contents_for_printing_const -- into methods of value. It also
+ converts the static functions require_not_optimized_out and
+ require_available to be private methods.
+
+ Approved-By: Simon Marchi <simon.marchi@efficios.com>
+
+2023-02-13 Tom Tromey <tom@tromey.com>
+
+ Turn value_incref and value_decref into methods
+ This changes value_incref and value_decref to be methods of value.
+ Much of this patch was written by script.
+
+ Approved-By: Simon Marchi <simon.marchi@efficios.com>
+
+2023-02-13 Tom Tromey <tom@tromey.com>
+
+ Move value_ref_policy methods out-of-line
+ This moves the value_ref_policy methods to be defined out-of-line.
+ This is a necessary step to change value_incref and value_decref to be
+ methods of value.
+
+ Approved-By: Simon Marchi <simon.marchi@efficios.com>
+
+2023-02-13 Tom Tromey <tom@tromey.com>
+
+ Turn value_bits_synthetic_pointer into a method
+ This changes value_bits_synthetic_pointer to be a method of value.
+
+ Approved-By: Simon Marchi <simon.marchi@efficios.com>
+
+2023-02-13 Tom Tromey <tom@tromey.com>
+
+ Turn value_contents_eq into a method
+ This changes value_contents_eq to be a method of value. It also
+ converts the static function value_contents_bits_eq into a private
+ method.
+
+ Approved-By: Simon Marchi <simon.marchi@efficios.com>
+
+2023-02-13 Tom Tromey <tom@tromey.com>
+
+ Turn allocate_value_contents into a method
+ This turns the static function allocate_value_contents into a method
+ on value. It is temporarily public, until some users are converted.
+ set_limited_array_length is converted as well.
+
+ Approved-By: Simon Marchi <simon.marchi@efficios.com>
+
+2023-02-13 Tom Tromey <tom@tromey.com>
+
+ Turn value_fetch_lazy into a method
+ This changes value_fetch_lazy to be a method of value. A few helper
+ functions are converted as well, to avoid problems in later patches
+ when the data members are all made private.
+
+ Approved-By: Simon Marchi <simon.marchi@efficios.com>
+
+2023-02-13 Tom Tromey <tom@tromey.com>
+
+ Turn some value_contents functions into methods
+ This turns value_contents_raw, value_contents_writeable, and
+ value_contents_all_raw into methods on value. The remaining functions
+ will be changed later in the series; they were a bit trickier and so I
+ didn't include them in this patch.
+
+ Approved-By: Simon Marchi <simon.marchi@efficios.com>
+
+2023-02-13 Tom Tromey <tom@tromey.com>
+
+ Turn value_zero into static "constructor"
+ This turns value_zero into a static "constructor" of value.
+
+ Approved-By: Simon Marchi <simon.marchi@efficios.com>
+
+2023-02-13 Tom Tromey <tom@tromey.com>
+
+ Turn allocate_optimized_out_value into static "constructor"
+ This turns allocate_optimized_out_value into a static "constructor" of
+ value.
+
+ Approved-By: Simon Marchi <simon.marchi@efficios.com>
+
+2023-02-13 Tom Tromey <tom@tromey.com>
+
+ Turn allocate_computed_value into static "constructor"
+ This turns allocate_computed_value into a static "constructor" of
+ value.
+
+ Approved-By: Simon Marchi <simon.marchi@efficios.com>
+
+2023-02-13 Tom Tromey <tom@tromey.com>
+
+ Turn allocate_value into a static "constructor"
+ This changes allocate_value to be a static "constructor" of value.
+
+ Approved-By: Simon Marchi <simon.marchi@efficios.com>
+
+2023-02-13 Tom Tromey <tom@tromey.com>
+
+ Turn allocate_value_lazy into a static "constructor"
+ This changes allocate_value_lazy to be a static "constructor" of
+ struct value.
+
+ I considered trying to change value to use ordinary new/delete, but it
+ seems to me that due to reference counting, we may someday want to
+ change these static constructors to return value_ref_ptr instead.
+
+ Approved-By: Simon Marchi <simon.marchi@efficios.com>
+
+2023-02-13 Tom Tromey <tom@tromey.com>
+
+ Turn more deprecated_* functions into methods
+ This changes deprecated_value_internalvar_hack,
+ deprecated_value_internalvar_hack, and deprecated_value_regnum_hack
+ into methods on value.
+
+ Approved-By: Simon Marchi <simon.marchi@efficios.com>
+
+2023-02-13 Tom Tromey <tom@tromey.com>
+
+ Turn value_address and set_value_address functions into methods
+ This changes the value_address and set_value_address functions to be
+ methods of value.
+
+ Approved-By: Simon Marchi <simon.marchi@efficios.com>
+
+2023-02-13 Tom Tromey <tom@tromey.com>
+
+ Turn value_initialized and set_value_initialized functions into methods
+ This changes the value_initialized and set_value_initialized functions
+ to be methods of value.
+
+ Approved-By: Simon Marchi <simon.marchi@efficios.com>
+
+2023-02-13 Tom Tromey <tom@tromey.com>
+
+ Convert value_lval_const and deprecated_lval_hack to methods
+ This converts the value_lval_const and deprecated_lval_hack functions
+ to be methods on value.
+
+ Approved-By: Simon Marchi <simon.marchi@efficios.com>
+
+2023-02-13 Tom Tromey <tom@tromey.com>
+
+ Turn value_computed_closure and value_computed_funcs functions into methods
+ This changes the value_computed_funcs and value_computed_closure
+ functions to be methods of value.
+
+ Approved-By: Simon Marchi <simon.marchi@efficios.com>
+
+2023-02-13 Tom Tromey <tom@tromey.com>
+
+ Turn value_stack and set_value_stack functions into methods
+ This changes the value_stack and set_value_stack functions to be
+ methods of value.
+
+ Approved-By: Simon Marchi <simon.marchi@efficios.com>
+
+2023-02-13 Tom Tromey <tom@tromey.com>
+
+ Turn value_lazy and set_value_lazy functions into methods
+ This changes the value_lazy and set_value_lazy functions to be methods
+ of value. Much of this patch was written by script.
+
+ Approved-By: Simon Marchi <simon.marchi@efficios.com>
+
+2023-02-13 Tom Tromey <tom@tromey.com>
+
+ Turn some value offset functions into method
+ This changes various offset-related functions to be methods of value.
+ Much of this patch was written by script.
+
+ Approved-By: Simon Marchi <simon.marchi@efficios.com>
+
+2023-02-13 Tom Tromey <tom@tromey.com>
+
+ Turn value_enclosing_type into method
+ This changes value_enclosing_type to be a method of value. Much of
+ this patch was written by script.
+
+ Approved-By: Simon Marchi <simon.marchi@efficios.com>
+
+2023-02-13 Tom Tromey <tom@tromey.com>
+
+ Turn deprecated_value_modifiable into method
+ This changes deprecated_value_modifiable to be a method of value.
+
+ Approved-By: Simon Marchi <simon.marchi@efficios.com>
+
+2023-02-13 Tom Tromey <tom@tromey.com>
+
+ Turn value_offset into method
+ This changes value_offset to be a method of value. Much of this patch
+ was written by script.
+
+ Approved-By: Simon Marchi <simon.marchi@efficios.com>
+
+2023-02-13 Tom Tromey <tom@tromey.com>
+
+ Turn value_parent into method
+ This changes value_parent to be a method of value. Much of this patch
+ was written by script.
+
+ Approved-By: Simon Marchi <simon.marchi@efficios.com>
+
+2023-02-13 Tom Tromey <tom@tromey.com>
+
+ Turn value_bitpos into method
+ This changes value_bitpos to be a method of value. Much of this patch
+ was written by script.
+
+ Approved-By: Simon Marchi <simon.marchi@efficios.com>
+
+2023-02-13 Tom Tromey <tom@tromey.com>
+
+ Turn value_bitsize into method
+ This changes value_bitsize to be a method of value. Much of this patch
+ was written by script.
+
+ Approved-By: Simon Marchi <simon.marchi@efficios.com>
+
+2023-02-13 Tom Tromey <tom@tromey.com>
+
+ Turn value_arch into method
+ This changes value_arch to be a method of value. Much of this patch
+ was written by script.
+
+ Approved-By: Simon Marchi <simon.marchi@efficios.com>
+
+2023-02-13 Tom Tromey <tom@tromey.com>
+
+ Turn deprecated_set_value_type into a method
+ This changes deprecated_set_value_type to be a method of value. Much
+ of this patch was written by script.
+
+ Approved-By: Simon Marchi <simon.marchi@efficios.com>
+
+2023-02-13 Tom Tromey <tom@tromey.com>
+
+ Turn value_type into method
+ This changes value_type to be a method of value. Much of this patch
+ was written by script.
+
+ Approved-By: Simon Marchi <simon.marchi@efficios.com>
+
+2023-02-13 Tom Tromey <tom@tromey.com>
+
+ Move struct value to value.h
+ This moves struct value to value.h. For now, all members remain
+ public, but this is a temporary state -- by the end of the series
+ we'll add 'private'.
+
+ Approved-By: Simon Marchi <simon.marchi@efficios.com>
+
+2023-02-13 Tom Tromey <tom@tromey.com>
+
+ Move ~value body out-of-line
+ struct value is going to move to value.h, but to avoid having
+ excessive code there, first move the destructor body out-of-line.
+
+ Approved-By: Simon Marchi <simon.marchi@efficios.com>
+
+2023-02-13 Tom Tromey <tom@tromey.com>
+
+ Rename all fields of struct value
+ This renames all the fields of struct value, in preparation for the
+ coming changes.
+
+ Approved-By: Simon Marchi <simon.marchi@efficios.com>
+
+2023-02-13 Michael Matz <matz@suse.de>
+
+ PR30120: fix x87 fucomp misassembled
+ this fixes the entry for 'fucomp' to use the correct Reg value
+ (otherwise it's assembled as 'fucom').
+
+2023-02-13 Tom Tromey <tromey@adacore.com>
+
+ Remove unused imports from gdb's Python code
+ The "sys" import is unused in several Python files. This removes this
+ line from all the places where it is unnecessary.
+
+2023-02-13 Andrew Burgess <aburgess@redhat.com>
+
+ gdb/tui: don't leak the known_window_types map
+ This commit finishes the task that was started in the previous
+ commit.
+
+ Now that all Python TUI window factories are correctly deleted when
+ the Python interpreter is shut down, we no longer need to dynamically
+ allocate the known_window_types map in tui-layout.c
+
+ This commit changes known_window_types to a statically allocated data
+ structure, removes the dynamic allocation from
+ initialize_known_windows, and then replaces lots of '->' with '.'
+ throughout this file.
+
+ There should be no user visible changes after this commit.
+
+ Reviewed-By: Tom Tromey <tom@tromey.com>
+
+2023-02-13 Andrew Burgess <aburgess@redhat.com>
+
+ gdb/python: deallocate tui window factories at Python shut down
+ The previous commit relied on spotting when a Python defined TUI
+ window factory was deleted. I spotted that the window factories are
+ not deleted when GDB shuts down its Python environment, they are only
+ deleted when one window factory replaces another. Consider this
+ example Python script:
+
+ class TestWindowFactory:
+ def __init__(self, msg):
+ self.msg = msg
+ print("Entering TestWindowFactory.__init__: %s" % self.msg)
+
+ def __call__(self, tui_win):
+ print("Entering TestWindowFactory.__call__: %s" % self.msg)
+ return TestWindow(tui_win, self.msg)
+
+ def __del__(self):
+ print("Entering TestWindowFactory.__del__: %s" % self.msg)
+
+ gdb.register_window_type("test_window", TestWindowFactory("A"))
+ gdb.register_window_type("test_window", TestWindowFactory("B"))
+
+ And this GDB session:
+
+ (gdb) source tui.py
+ Entering TestWindowFactory.__init__: A
+ Entering TestWindowFactory.__init__: B
+ Entering TestWindowFactory.__del__: B
+ (gdb) quit
+
+ Notice that when the 'B' window replaces the 'A' window we see the 'A'
+ object being deleted. But, when Python is shut down (after the
+ 'quit') the 'B' object is never deleted.
+
+ Instead, GDB retains a reference to the window factory object, which
+ forces the Python object to remain live even after the Python
+ interpreter itself has been shut down.
+
+ The references themselves are held in a dynamically allocated
+ std::unordered_map (in tui/tui-layout.c) which is never deallocated,
+ thus the underlying Python references are never decremented to zero,
+ and so GDB never tries to delete these Python objects.
+
+ This commit is the first half of the work to clean up this edge case.
+
+ All gdbpy_tui_window_maker objects (the objects that implement the
+ TUI window factory callback for Python defined TUI windows), are now
+ linked together into a global list using the intrusive list mechanism.
+
+ When GDB shuts down the Python interpreter we can now walk this global
+ list and release the reference that is held to the underlying Python
+ object. By releasing this reference the Python object will now be
+ deleted.
+
+ I've added a new assert in gdbpy_tui_window_maker::operator(), this
+ will catch the case where we somehow end up in here after having
+ reset the reference to the underlying Python object. I don't think
+ this should ever happen though as we only clear the references when
+ shutting down the Python interpreter, and the ::operator() function is
+ only called when trying to apply a new TUI layout - something that
+ shouldn't happen while GDB itself is shutting down.
+
+ This commit does not update the std::unordered_map in tui-layout.c,
+ that will be done in the next commit.
+
+ Reviewed-By: Tom Tromey <tom@tromey.com>
+
+2023-02-13 Andrew Burgess <aburgess@redhat.com>
+
+ gdb/python: allow Python TUI windows to be replaced
+ The documentation for gdb.register_window_type says:
+
+ "... It's an error to try to replace one of the built-in windows,
+ but other window types can be replaced. ..."
+
+ I take this to mean that if I imported a Python script like this:
+
+ gdb.register_window_type('my_window', FactoryFunction)
+
+ Then GDB would have a new TUI window 'my_window', which could be
+ created by calling FactoryFunction(). If I then, in the same GDB
+ session imported a script which included:
+
+ gdb.register_window_type('my_window', UpdatedFactoryFunction)
+
+ Then GDB would replace the old 'my_window' factory with my new one,
+ GDB would now call UpdatedFactoryFunction().
+
+ This is pretty useful in practice, as it allows users to iterate on
+ their window implementation within a single GDB session.
+
+ However, right now, this is not how GDB operates. The second call to
+ register_window_type is basically ignored and the old window factory
+ is retained.
+
+ This is because in tui_register_window (tui/tui-layout.c) we use
+ std::unordered_map::emplace to insert the new factory function, and
+ emplace doesn't replace an existing element in an unordered_map.
+
+ In this commit, before the emplace call, I now search for an already
+ existing element, and delete any matching element from the map, the
+ emplace call will then add the new factory function.
+
+ Reviewed-By: Tom Tromey <tom@tromey.com>
+
+2023-02-13 Keith Seitz <keiths@redhat.com>
+
+ Fix doc build dependencies for --with-system-readline
+ PR build/30108 concerns building gdb documentation with
+ --with-sytem-readline. If the in-tree readline directory is
+ missing, though, the docs will fail to build:
+
+ make[4]: Entering directory '/home/keiths/work/readline-doc-issue/linux/gdb/doc'
+ make[4]: *** No rule to make target '../../../src/gdb/doc/../../readline/readline/doc/rluser.texi', needed by 'gdb.info'. Stop.
+
+ The listed file (and hsuser.texi) are conditionally included by gdb.texinfo.
+ When system readline is used, gdb/configure.ac will leave
+ READLINE_TEXI_INCFLAGS empty, causing doc/Makefile.in to output a line to
+ $BUILD/doc/GDBvn.texi with "@set SYSTEM_READLINE". This surpresses the
+ inclusion of the missing files. They are not needed or used in this
+ scenario.
+
+ However, GDB_DOC_SOURCE_INCLUDES always lists these two files as dependencies,
+ thus provoking the build error whenever readline/ is missing.
+
+ This patch fixes this by creating (essentially) a conditional setting of the
+ dependencies to be included from readline.
+
+2023-02-13 Michael Matz <matz@suse.de>
+
+ Fix PR30079: abort on mingw
+ the early-out in wild_sort is not enough, it might still be
+ that filenames are equal _and_ the wildcard list doesn't specify
+ a sort order either. Don't call compare_section then.
+
+ Tested on all targets.
+
+2023-02-13 Alan Modra <amodra@gmail.com>
+
+ _bfd_ecoff_slurp_symbol_table buffer overflow
+ Add missing bounds check, and tidy the existing bounds checking.
+
+ * ecoff.c (_bfd_ecoff_slurp_symbol_table): Break overlong lines.
+ Set bfd_error. Bounds check internal_sym.iss.
+
+2023-02-13 Andrew Burgess <aburgess@redhat.com>
+
+ opcodes/mips: disassemble unknown micromips instructions as two shorts
+ Before commit:
+
+ commit 2438b771ee07be19d5b01ea55e077dd8b7cef445
+ Date: Wed Nov 2 15:53:43 2022 +0000
+
+ opcodes/mips: use .word/.short for undefined instructions
+
+ unknown 32-bit microMIPS instructions were disassembled as a raw
+ 32-bit number with no '.word' directive. The above commit changed
+ this and added a '.word' directive before the 32-bit number.
+
+ It was pointed out on the mailing list, that for microMIPS it would be
+ better to display such 32-bit instructions using a '.short' directive
+ followed by two 16-bit values.
+
+ This commit updates the mips disassembler to do this, and adds a new
+ test that validates this output.
+
+2023-02-13 Andrew Burgess <aburgess@redhat.com>
+
+ gdb/testsuite: handle differences in guile error string output
+ A new guile test added in commit:
+
+ commit 0a9ccb9dd79384f3ba3f8cd75940e8868f3b526f
+ Date: Mon Feb 6 13:04:16 2023 +0000
+
+ gdb: only allow one of thread or task on breakpoints or watchpoints
+
+ fails for some versions of guile. It turns out that some versions of
+ guile emit an error like this:
+
+ (gdb) guile (set-breakpoint-thread! bp 1)
+ ERROR: In procedure set-breakpoint-thread!:
+ In procedure gdbscm_set_breakpoint_thread_x: cannot set both task and thread attributes
+ Error while executing Scheme code.
+
+ while other versions of guile emit the error like this:
+
+ (gdb) guile (set-breakpoint-thread! bp 1)
+ ERROR: In procedure set-breakpoint-thread!:
+ ERROR: In procedure gdbscm_set_breakpoint_thread_x: cannot set both task and thread attributes
+ Error while executing Scheme code.
+
+ notice the extra 'ERROR: ' on the second line of output. This commit
+ updates the test regexp to handle this optional 'ERROR: ' string.
+
+2023-02-13 Alan Modra <amodra@gmail.com>
+
+ stabs.c static state
+ Move all the function local static state variables to file scope,
+ in order to tidy memory on exit and to reinit everything for that
+ annoying oss-fuzz. Also fix a couple memory leaks.
+
+ * read.h (read_begin, read_end): Declare.
+ * read.c (read_begin): Call stabs_begin.
+ (read_end): Call stabs_end.
+ * stabs.c (stabs_begin, stabs_end): New functions.
+ (in_dot_func_p): Delete, use current_function_label instead.
+ (cached_sec): Move from s_stab_generic.
+ (last_asm_file, file_label_count): Move from generate_asm_file.
+ (line_label_count, prev_lineno, prev_line_file): Move from
+ stabs_generate_asm_lineno.
+ (void_emitted_p): Move from stabs_generate_asm_func.
+ (endfunc_label_count): Move from stabs_generate_asm_endfunc.
+ (stabs_generate_asm_lineno): Simplify setting of
+ prev_line_file.
+ (stabs_generate_asm_func): Don't leak current_function_label.
+ (stabs_generate_asm_endfunc): Likewise.
+
+2023-02-13 Alan Modra <amodra@gmail.com>
+
+ Split off gas init to functions
+ With some slight reordering.
+
+ * as.c (gas_early_init, gas_late_init): New functions, split..
+ (main): ..from here.
+
+2023-02-13 Lancelot SIX <lancelot.six@amd.com>
+
+ gdb/testsuite: look for hipcc in env(ROCM_PATH)
+ If the hipcc compiler cannot be found in dejagnu's tool_root_dir, look
+ for it in $::env(ROCM_PATH) (if set). If hipcc is still not found,
+ fallback to "hipcc" so the compiler will be searched in the PATH. This
+ removes the fallback to the hard-coded "/opt/rocm/bin" prefix.
+
+ This change is done so ROCM tools are searched in a uniform manner.
+
+ Approved-By: Simon Marchi <simon.marchi@efficios.com>
+
+2023-02-13 Lancelot SIX <lancelot.six@amd.com>
+
+ gdb/testsuite: allow_hipcc_tests tests the hipcc compiler
+ Update allow_hipcc_tests so all gdb.rocm tests are skipped if we do not
+ have a working hipcc compiler available.
+
+ To achieve this, adjust gdb_simple_compile to ensure that the hip
+ program is saved in a ".cpp" file before calling hipcc otherwise
+ compilation will fail.
+
+ One thing to note is that it is possible to have a hipcc installed with
+ a CUDA backend. Compiling with this back-end will successfully result
+ in an application, but GDB cannot debug it (at least for the offload
+ part). In the context of the gdb.rocm tests, we want to detect such
+ situation where gdb_simple_compile would give a false positive.
+
+ To achieve this, this patch checks that there is at least one AMDGPU
+ device available and that hipcc can compile for this or those targets.
+ Detecting the device is done using the rocm_agent_enumerator tool which
+ is installed with the all ROCm installations (it is used by hipcc to
+ detect identify targets if this is not specified on the comand line).
+
+ This patch also makes the allow_hipcc_tests proc a cached proc.
+
+ Co-Authored-By: Pedro Alves <pedro@palves.net>
+ Approved-By: Simon Marchi <simon.marchi@efficios.com>
+
+2023-02-13 Lancelot SIX <lancelot.six@amd.com>
+
+ gdb/testsuite: require amd-dbgapi support to run rocm tests
+ Update allow_hipcc_tests to check that GDB has the amd-dbgapi support
+ built-in. Without this support, all tests using hipcc and the rocm
+ stack will fail.
+
+ Approved-By: Simon Marchi <simon.marchi@efficios.com>
+
+2023-02-13 Lancelot SIX <lancelot.six@amd.com>
+
+ gdb/testsuite: Rename skip_hipcc_tests to allow_hipcc_tests
+ Rename skip_hipcc_tests to allow_hipcc_tests so it can be used as a
+ "require" predicate in tests.
+
+ Use require in gdb.rocm/simple.exp.
+
+ Approved-By: Simon Marchi <simon.marchi@efficios.com>
+
+2023-02-13 Lancelot SIX <lancelot.six@amd.com>
+
+ gdb: 'show config' shows --with[out]-amd-dbgapi
+ Ensure that the "show configuration" command and the "--configuration"
+ command line switch shows if GDB was built with the AMDGPU support or
+ not.
+
+ This will be used in a later patch in this series.
+
+ Approved-By: Simon Marchi <simon.marchi@efficios.com>
+
+2023-02-13 Alan Modra <amodra@gmail.com>
+
+ objcopy memory leaks
+ This fixes some objcopy memory leaks. commit 450da4bd38ae used
+ xatexit to tidy most of the hash table memory, but of course that's
+ ineffective without a call to xexit. The other major memory leak
+ happens if there is an error of some sort writing the output file, due
+ to not closing the input file and thus not freeing memory attached to
+ the bfd.
+
+ * objcopy.c (copy_file): Don't return when bfd_close of output
+ gives an error, always bfd_close input too.
+ (main): Call xexit.
+
+2023-02-13 GDB Administrator <gdbadmin@sourceware.org>
+
+ Automatic date update in version.in
+
+2023-02-12 Tom Tromey <tom@tromey.com>
+
+ Move some code from dwarf2/read.c to die.c
+ This patch introduces a new file, dwarf2/die.c, and moves some
+ DIE-related code out of dwarf2/read.c and into this new file. This is
+ just a small part of the long-term project to split up read.c.
+ (According to 'wc', dwarf2/read.c is the largest file in gdb by around
+ 8000 LOC.)
+
+ Regression tested on x86-64 Fedora 36.
+
+2023-02-12 Andrew Burgess <aburgess@redhat.com>
+
+ gdb: fix describe_other_breakpoints for default task being -1
+ Commit:
+
+ commit 2ecee236752932672fb3d6cd63c6976927f747d8
+ CommitDate: Sun Feb 12 05:46:44 2023 +0000
+
+ gdb: use -1 for breakpoint::task default value
+
+ Failed to take account of an earlier commit:
+
+ commit f1f517e81039f6aa673b7d87a66bfbd25a66e3d3
+ CommitDate: Sat Feb 11 17:36:24 2023 +0000
+
+ gdb: show task number in describe_other_breakpoints
+
+ That both of these are my own commits is only more embarrassing.
+
+ This small fix updates describe_other_breakpoints to take account of
+ the default task number now being -1. This fixes regressions in
+ gdb.base/break.exp, gdb.base/break-always.exp, and many other tests.
+
+2023-02-12 Andrew Burgess <aburgess@redhat.com>
+
+ gdb/c++: fix handling of breakpoints on @plt symbols
+ This commit should fix PR gdb/20091, PR gdb/17201, and PR gdb/17071.
+ Additionally, PR gdb/17199 relates to this area of code, but is more
+ of a request to refactor some parts of GDB, this commit does not
+ address that request, but it is probably worth reading that PR when
+ looking at this commit.
+
+ When the current language is C++, and the user places a breakpoint on
+ a function in a shared library, GDB will currently find two locations
+ for the breakpoint, one location will be within the function itself as
+ we would expect, but the other location will be within the PLT table
+ for the call to the named function. Consider this session:
+
+ $ gdb -q /tmp/breakpoint-shlib-func
+ Reading symbols from /tmp/breakpoint-shlib-func...
+ (gdb) start
+ Temporary breakpoint 1 at 0x40112e: file /tmp/breakpoint-shlib-func.cc, line 20.
+ Starting program: /tmp/breakpoint-shlib-func
+
+ Temporary breakpoint 1, main () at /tmp/breakpoint-shlib-func.cc:20
+ 20 int answer = foo ();
+ (gdb) break foo
+ Breakpoint 2 at 0x401030 (2 locations)
+ (gdb) info breakpoints
+ Num Type Disp Enb Address What
+ 2 breakpoint keep y <MULTIPLE>
+ 2.1 y 0x0000000000401030 <foo()@plt>
+ 2.2 y 0x00007ffff7fc50fd in foo() at /tmp/breakpoint-shlib-func-lib.cc:20
+
+ This is not the expected behaviour. If we compile the same test using
+ a C compiler then we see this:
+
+ (gdb) break foo
+ Breakpoint 2 at 0x7ffff7fc50fd: file /tmp/breakpoint-shlib-func-c-lib.c, line 20.
+ (gdb) info breakpoints
+ Num Type Disp Enb Address What
+ 2 breakpoint keep y 0x00007ffff7fc50fd in foo at /tmp/breakpoint-shlib-func-c-lib.c:20
+
+ Here's what's happening. When GDB parses the symbols in the main
+ executable and the shared library we see a number of different symbols
+ for foo, and use these to create entries in GDB's msymbol table:
+
+ - In the main executable we see a symbol 'foo@plt' that points at
+ the plt entry for foo, from this we add two entries into GDB's
+ msymbol table, one called 'foo@plt' which points at the plt entry
+ and has type mst_text, then we create a second symbol, this time
+ called 'foo' with type mst_solib_trampoline which also points at
+ the plt entry,
+
+ - Then, when the shared library is loaded we see another symbol
+ called 'foo', this one points at the actual implementation in the
+ shared library. This time GDB creates a msymbol called 'foo' with
+ type mst_text that points at the implementation.
+
+ This means that GDB creates 3 msymbols to represent the 2 symbols
+ found in the executable and shared library.
+
+ When the user creates a breakpoint on 'foo' GDB eventually ends up in
+ search_minsyms_for_name (linespec.c), this function then calls
+ iterate_over_minimal_symbols passing in the name we are looking for
+ wrapped in a lookup_name_info object.
+
+ In iterate_over_minimal_symbols we iterate over two hash tables (using
+ the name we're looking for as the hash key), first we walk the hash
+ table of symbol linkage names, then we walk the hash table of
+ demangled symbol names.
+
+ When the language is C++ the symbols for 'foo' will all have been
+ mangled, as a result, in this case, the iteration of the linkage name
+ hash table will find no matching results.
+
+ However, when we walk the demangled hash table we do find some
+ results. In order to match symbol names, GDB obtains a symbol name
+ matching function by calling the get_symbol_name_matcher method on the
+ language_defn class. For C++, in this case, the matching function we
+ use is cp_fq_symbol_name_matches, which delegates the work to
+ strncmp_iw_with_mode with mode strncmp_iw_mode::MATCH_PARAMS and
+ language set to language_cplus.
+
+ The strncmp_iw_mode::MATCH_PARAMS mode means that strncmp_iw_mode will
+ skip any parameters in the demangled symbol name when checking for a
+ match, e.g. 'foo' will match the demangled name 'foo()'. The way this
+ is done is that the strings are matched character by character, but,
+ once the string we are looking for ('foo' here) is exhausted, if we
+ are looking at '(' then we consider the match a success.
+
+ Lets consider the 3 symbols GDB created. If the function declaration
+ is 'void foo ()' then from the main executable we added symbols
+ '_Z3foov@plt' and '_Z3foov', while from the shared library we added
+ another symbol call '_Z3foov'. When these are demangled they become
+ 'foo()@plt', 'foo()', and 'foo()' respectively.
+
+ Now, the '_Z3foov' symbol from the main executable has the type
+ mst_solib_trampoline, and in search_minsyms_for_name, we search for
+ any symbols of type mst_solib_trampoline and filter these out of the
+ results.
+
+ However, the '_Z3foov@plt' symbol (from the main executable), and the
+ '_Z3foov' symbol (from the shared library) both have type mst_text.
+
+ During the demangled name matching, due to the use of MATCH_PARAMS
+ mode, we stop the comparison as soon as we hit a '(' in the demangled
+ name. And so, '_Z3foov@plt', which demangles to 'foo()@plt' matches
+ 'foo', and '_Z3foov', which demangles to 'foo()' also matches 'foo'.
+
+ By contrast, for C, there are no demangled hash table entries to be
+ iterated over (in iterate_over_minimal_symbols), we only consider the
+ linkage name symbols which are 'foo@plt' and 'foo'. The plain 'foo'
+ symbol obviously matches when we are looking for 'foo', but in this
+ case the 'foo@plt' will not match due to the '@plt' suffix.
+
+ And so, when the user asks for a breakpoint in 'foo', and the language
+ is C, search_minsyms_for_name, returns a single msymbol, the mst_text
+ symbol for foo in the shared library, while, when the language is C++,
+ we get two results, '_Z3foov' for the shared library function, and
+ '_Z3foov@plt' for the plt entry in the main executable.
+
+ I propose to fix this in strncmp_iw_with_mode. When the mode is
+ MATCH_PARAMS, instead of stopping at a '(' and assuming the match is a
+ success, GDB will instead search forward for the matching, closing,
+ ')', effectively skipping the parameter list, and then resume
+ matching. Thus, when comparing 'foo' to 'foo()@plt' GDB will
+ effectively compare against 'foo@plt' (skipping the parameter list),
+ and the match will fail, just as it does when the language is C.
+
+ There is one slight complication, which is revealed by the test
+ gdb.linespec/cpcompletion.exp, when searching for the symbol of a
+ const member function, the demangled symbol will have 'const' at the
+ end of its name, e.g.:
+
+ struct_with_const_overload::const_overload_fn() const
+
+ Previously, the matching would stop at the '(' character, but after my
+ change the whole '()' is skipped, and the match resumes. As a result,
+ the 'const' modifier results in a failure to match, when previously
+ GDB would have found a match.
+
+ To work around this issue, in strncmp_iw_with_mode, when mode is
+ MATCH_PARAMS, after skipping the parameter list, if the next character
+ is '@' then we assume we are looking at something like '@plt' and
+ return a value indicating the match failed, otherwise, we return a
+ value indicating the match succeeded, this allows things like 'const'
+ to be skipped.
+
+ With these changes in place I now see GDB correctly setting a
+ breakpoint only at the implementation of 'foo' in the shared library.
+
+ Bug: https://sourceware.org/bugzilla/show_bug.cgi?id=20091
+ Bug: https://sourceware.org/bugzilla/show_bug.cgi?id=17201
+ Bug: https://sourceware.org/bugzilla/show_bug.cgi?id=17071
+ Bug: https://sourceware.org/bugzilla/show_bug.cgi?id=17199
+
+ Tested-By: Bruno Larsen <blarsen@redhat.com>
+ Approved-By: Simon Marchi <simon.marchi@efficios.com>
+
+2023-02-12 Andrew Burgess <aburgess@redhat.com>
+
+ gdb: use -1 for breakpoint::task default value
+ Within the breakpoint struct we have two fields ::thread and ::task
+ which are used for thread or task specific breakpoints. When a
+ breakpoint doesn't have a specific thread or task then these fields
+ have the values -1 and 0 respectively.
+
+ There's no particular reason (as far as I can tell) why these two
+ "default" values are different, and I find the difference a little
+ confusing. Long term I'd like to potentially fold these two fields
+ into a single field, but that isn't what this commit does.
+
+ What this commit does is switch to using -1 as the "default" value for
+ both fields, this means that the default for breakpoint::task has
+ changed from 0 to -1. I've updated all the code I can find that
+ relied on the value of 0, and I see no test regressions, especially in
+ gdb.ada/tasks.exp, which still fully passes.
+
+ There should be no user visible changes after this commit.
+
+ Approved-By: Pedro Alves <pedro@palves.net>
+
+2023-02-12 Andrew Burgess <aburgess@redhat.com>
+
+ gdb: only allow one of thread or task on breakpoints or watchpoints
+ After this mailing list posting:
+
+ https://sourceware.org/pipermail/gdb-patches/2023-February/196607.html
+
+ it seems to me that in practice an Ada task maps 1:1 with a GDB
+ thread, and so it doesn't really make sense to allow uses to give both
+ a thread and a task within a single breakpoint or watchpoint
+ condition.
+
+ This commit updates GDB so that the user will get an error if both
+ are specified.
+
+ I've added new tests to cover the CLI as well as the Python and Guile
+ APIs. For the Python and Guile testing, as far as I can tell, this
+ was the first testing for this corner of the APIs, so I ended up
+ adding more than just a single test.
+
+ For documentation I've added a NEWS entry, but I've not added anything
+ to the docs themselves. Currently we document the commands with a
+ thread-id or task-id as distinct command, e.g.:
+
+ 'break LOCSPEC task TASKNO'
+ 'break LOCSPEC task TASKNO if ...'
+ 'break LOCSPEC thread THREAD-ID'
+ 'break LOCSPEC thread THREAD-ID if ...'
+
+ As such, I don't believe there is any indication that combining 'task'
+ and 'thread' would be expected to work; it seems clear to me in the
+ above that those four options are all distinct commands.
+
+ I think the NEWS entry is enough that if someone is combining these
+ keywords (it's not clear what the expected behaviour would be in this
+ case) then they can figure out that this was a deliberate change in
+ GDB, but for a new user, the manual doesn't suggest combining them is
+ OK, and any future attempt to combine them will give an error.
+
+ Approved-By: Pedro Alves <pedro@palves.net>
+
+2023-02-12 GDB Administrator <gdbadmin@sourceware.org>
+
+ Automatic date update in version.in
+
+2023-02-11 Andrew Burgess <aburgess@redhat.com>
+
+ gdb: show task number in describe_other_breakpoints
+ I noticed that describe_other_breakpoints doesn't show the task
+ number, but does show the thread-id. I can't see any reason why we'd
+ want to not show the task number in this situation, so this commit
+ adds this missing information, and extends gdb.ada/tasks.exp to check
+ this case.
+
+ Approved-By: Pedro Alves <pedro@palves.net>
+
+2023-02-11 Andrew Burgess <aburgess@redhat.com>
+
+ gdb: don't print global thread-id to CLI in describe_other_breakpoints
+ I noticed that describe_other_breakpoints was printing the global
+ thread-id to the CLI. For CLI output we should be printing the
+ inferior local thread-id (e.g. "2.1"). This can be seen in the
+ following GDB session:
+
+ (gdb) info threads
+ Id Target Id Frame
+ 1.1 Thread 4065742.4065742 "bp-thread-speci" main () at /tmp/bp-thread-specific.c:27
+ * 2.1 Thread 4065743.4065743 "bp-thread-speci" main () at /tmp/bp-thread-specific.c:27
+ (gdb) break foo thread 2.1
+ Breakpoint 3 at 0x40110a: foo. (2 locations)
+ (gdb) break foo thread 1.1
+ Note: breakpoint 3 (thread 2) also set at pc 0x40110a.
+ Note: breakpoint 3 (thread 2) also set at pc 0x40110a.
+ Breakpoint 4 at 0x40110a: foo. (2 locations)
+
+ Notice that GDB says:
+
+ Note: breakpoint 3 (thread 2) also set at pc 0x40110a.
+
+ The 'thread 2' in here is using the global thread-id, we should
+ instead say 'thread 2.1' which corresponds to how the user specified
+ the breakpoint.
+
+ This commit fixes this issue and adds a test.
+
+ Approved-By: Pedro Alves <pedro@palves.net>
+
+2023-02-11 Andrew Burgess <aburgess@redhat.com>
+
+ gdb: add test for readline handling very long commands
+ The test added in this commit tests for a long fixed readline issue
+ relating to long command lines. A similar patch has existed in the
+ Fedora GDB tree for several years, but I don't see any reason why this
+ test would not be suitable for inclusion in upstream GDB. I've
+ updated the patch to current testsuite standards.
+
+ The test is checking for an issue that was fixed by this readline
+ patch:
+
+ https://lists.gnu.org/archive/html/bug-readline/2006-11/msg00002.html
+
+ Which was merged into readline 6.0 (released ~2010). The issue was
+ triggered when the user enters a long command line, which wrapped over
+ multiple terminal lines. The crash looks like this:
+
+ free(): invalid pointer
+
+ Fatal signal: Aborted
+ ----- Backtrace -----
+ 0x4fb583 gdb_internal_backtrace_1
+ ../../src/gdb/bt-utils.c:122
+ 0x4fb583 _Z22gdb_internal_backtracev
+ ../../src/gdb/bt-utils.c:168
+ 0x6047b9 handle_fatal_signal
+ ../../src/gdb/event-top.c:964
+ 0x7f26e0cc56af ???
+ 0x7f26e0cc5625 ???
+ 0x7f26e0cae8d8 ???
+ 0x7f26e0d094be ???
+ 0x7f26e0d10aab ???
+ 0x7f26e0d124ab ???
+ 0x7f26e1d32e12 rl_free_undo_list
+ ../../readline-5.2/undo.c:119
+ 0x7f26e1d229eb readline_internal_teardown
+ ../../readline-5.2/readline.c:405
+ 0x7f26e1d3425f rl_callback_read_char
+ ../../readline-5.2/callback.c:197
+ 0x604c0d gdb_rl_callback_read_char_wrapper_noexcept
+ ../../src/gdb/event-top.c:192
+ 0x60581d gdb_rl_callback_read_char_wrapper
+ ../../src/gdb/event-top.c:225
+ 0x60492f stdin_event_handler
+ ../../src/gdb/event-top.c:545
+ 0xa60015 gdb_wait_for_event
+ ../../src/gdbsupport/event-loop.cc:694
+ 0xa6078d gdb_wait_for_event
+ ../../src/gdbsupport/event-loop.cc:593
+ 0xa6078d _Z16gdb_do_one_eventi
+ ../../src/gdbsupport/event-loop.cc:264
+ 0x6fc459 start_event_loop
+ ../../src/gdb/main.c:411
+ 0x6fc459 captured_command_loop
+ ../../src/gdb/main.c:471
+ 0x6fdce4 captured_main
+ ../../src/gdb/main.c:1310
+ 0x6fdce4 _Z8gdb_mainP18captured_main_args
+ ../../src/gdb/main.c:1325
+ 0x44f694 main
+ ../../src/gdb/gdb.c:32
+ ---------------------
+
+ I recreated the above crash by a little light hacking on GDB, and then
+ linking GDB against readline 5.2. The above stack trace was generated
+ from the test included in this patch, and matches the trace that was
+ included in the original bug report.
+
+ It is worth acknowledging that without hacking things GDB has a
+ minimum requirement of readline 7.0. This test is not about checking
+ whether GDB has been built against an older version of readline, it is
+ about checking that readline doesn't regress in this area.
+
+ Reviewed-By: Tom Tromey <tom@tromey.com>
+
+2023-02-11 Andrew Burgess <aburgess@redhat.com>
+
+ gdb: remove unnecessary 'dir' commands from gdb-gdb.gdb script
+ While debugging GDB I used 'show directories' and spotted lots of
+ entries that didn't make much sense. Here are all the entries that are
+ in my directories list:
+
+ /tmp/binutils-gdb/build
+ /tmp/binutils-gdb/build/../../src/gdb
+ /tmp/binutils-gdb/build/../../src/gdb/../bfd
+ /tmp/binutils-gdb/build/../../src/gdb/../libiberty
+ $cdir
+ $cwd
+
+ Notice the second, third, and fourth entries in this list, these
+ should really be:
+
+ /tmp/binutils-gdb/build/../src/gdb
+ /tmp/binutils-gdb/build/../src/gdb/../bfd
+ /tmp/binutils-gdb/build/../src/gdb/../libiberty
+
+ The problem is because I generally run everything from the top level
+ build directory, not the gdb/ sub-directory, thus, I start GDB like:
+
+ ./gdb/gdb --data-directory ./gdb/data-directory
+
+ If run GDB under GDB, then I end up loading the gdb/gdb-gdb.gdb
+ script, which contains these lines:
+
+ dir ../../src/gdb/../libiberty
+ dir ../../src/gdb/../bfd
+ dir ../../src/gdb
+ dir .
+
+ These commands only make sense when running within the gdb/
+ sub-directory.
+
+ However, my debugging experience doesn't seem to be degraded at all, I
+ can still see the GDB source code just fine; which is because the
+ directory list still contains $cdir.
+
+ The build/gdb/gdb-gdb.gdb script is created from the
+ src/gdb/gdb-gdb.gdb.in template, which includes the automake @srcdir@
+ markers.
+
+ The 'dir' commands have mostly been around since the sourceware
+ repository was first created, though this commit 67f0714670383a did
+ reorder some of the 'dir' commands, which would seem to indicate these
+ commands were important to some people, at some time.
+
+ One possible fix would be to replace @srcdir@ with @abs_srcdir@, this
+ would ensure that the entries added were all valid, no matter the
+ user's current directory when debugging GDB.
+
+ However... I'd like to propose that we instead remove all the extra
+ directories completely. My hope is that, with more recent tools, the
+ debug information should allow us to correctly find all of the source
+ files without having to add any extra 'dir' entries. Obviously,
+ commit 67f0714670383a does make me a little nervous, but the
+ gdb-gdb.gdb script isn't something a non-maintainer will be using, so
+ I think we can afford to be a little more aggressive here. If it
+ turns out the 'dir' entries are needed then we can add them back, but
+ actually document why they are needed. Plus, when we add them back we
+ will use @abs_srcdir@ instead of @srcdir@.
+
+ Reviewed-By: Tom Tromey <tom@tromey.com>
+
+2023-02-11 Tom de Vries <tdevries@suse.de>
+
+ [gdb/tdep] Don't use i386 unwinder for amd64
+ For i386 we have these unwinders:
+ ...
+ $ gdb -q -batch -ex "set arch i386" -ex "maint info frame-unwinders"
+ The target architecture is set to "i386".
+ dummy DUMMY_FRAME
+ dwarf2 tailcall TAILCALL_FRAME
+ inline INLINE_FRAME
+ i386 epilogue NORMAL_FRAME
+ dwarf2 NORMAL_FRAME
+ dwarf2 signal SIGTRAMP_FRAME
+ i386 stack tramp NORMAL_FRAME
+ i386 sigtramp SIGTRAMP_FRAME
+ i386 prologue NORMAL_FRAME
+ ...
+ and for amd64:
+ ...
+ $ gdb -q -batch -ex "set arch i386:x86-64" -ex "maint info frame-unwinders"
+ The target architecture is set to "i386:x86-64".
+ dummy DUMMY_FRAME
+ dwarf2 tailcall TAILCALL_FRAME
+ inline INLINE_FRAME
+ python NORMAL_FRAME
+ amd64 epilogue NORMAL_FRAME
+ i386 epilogue NORMAL_FRAME
+ dwarf2 NORMAL_FRAME
+ dwarf2 signal SIGTRAMP_FRAME
+ amd64 sigtramp SIGTRAMP_FRAME
+ amd64 prologue NORMAL_FRAME
+ i386 stack tramp NORMAL_FRAME
+ i386 sigtramp SIGTRAMP_FRAME
+ i386 prologue NORMAL_FRAME
+ ...
+
+ ISTM me there's no reason for the i386 unwinders to be there for amd64.
+
+ Furthermore, there's a generic need to play around with enabling and disabling
+ unwinders, see PR8434. Currently, that's only available for both the dwarf2
+ unwinders at once using "maint set dwarf unwinders on/off".
+
+ If I manually disable the "amd64 epilogue" unwinder, the "i386 epilogue"
+ unwinder becomes active and gives the wrong answer, while I'm actually
+ interested in the result of the dwarf2 unwinder. Of course I can also
+ manually disable the "i386 epilogue", but I take the fact that I have to do
+ that as evidence that on amd64, the "i386 epilogue" is not only unnecessary,
+ but in the way.
+
+ Fix this by only adding the i386 unwinders if
+ "info.bfd_arch_info->bits_per_word == 32".
+
+ Note that the x32 abi (x86_64/-mx32):
+ - has the same unwinder list as amd64 (x86_64/-m64) before this commit,
+ - has info.bfd_arch_info->bits_per_word == 64, the same as amd64, and
+ consequently,
+ - has the same unwinder list as amd64 after this commit.
+
+ Tested on x86_64-linux, -m64 and -m32. Not tested with -mx32.
+
+ Reviewed-By: John Baldwin <jhb@freebsd.org>
+
+ PR tdep/30102
+ Bug: https://sourceware.org/bugzilla/show_bug.cgi?id=30102
+
+2023-02-11 Alan Modra <amodra@gmail.com>
+
+ objdump -D of bss sections and -s with -j
+ There is some inconsistency between the behaviour of objdump -D and
+ objdump -s, both supposedly operating on all sections by default.
+ objdump -s ignores bss sections, while objdump -D dissassembles the
+ zeros. Fix this by making objdump -D ignore bss sections too.
+
+ Furthermore, "objdump -s -j .bss" doesn't dump .bss as it should,
+ since the user is specifically asking to look at all those zeros.
+
+ This change does find some tests that used objdump -D with expected
+ output in bss-style sections. I've updated all the msp430 tests that
+ just wanted to find a non-empty section to look at section headers
+ instead, making the tests slightly more stringent. The ppc xcoff and
+ spu tests are fixed by adding -j options to objdump, which makes the
+ tests somewhat more lenient.
+
+ binutils/
+ * objdump.c (disassemble_section): Ignore sections without
+ contents, unless overridden by -j.
+ (dump_section): Allow -j to override the default of not
+ displaying sections without contents.
+ * doc/binutils.texi (objdump options): Update -D, -s and -j
+ description.
+ gas/
+ * testsuite/gas/ppc/xcoff-tls-32.d: Select wanted objdump
+ sections with -j.
+ * testsuite/gas/ppc/xcoff-tls-64.d: Likewise.
+ ld/
+ * testsuite/ld-msp430-elf/main-bss-lower.d,
+ * testsuite/ld-msp430-elf/main-bss-upper.d,
+ * testsuite/ld-msp430-elf/main-const-lower.d,
+ * testsuite/ld-msp430-elf/main-const-upper.d,
+ * testsuite/ld-msp430-elf/main-text-lower.d,
+ * testsuite/ld-msp430-elf/main-text-upper.d,
+ * testsuite/ld-msp430-elf/main-var-lower.d,
+ * testsuite/ld-msp430-elf/main-var-upper.d: Expect -wh output.
+ * testsuite/ld-msp430-elf/msp430-elf.exp: Use objdump -wh
+ rather than objdump -D or objdump -d with tests checking for
+ non-empty given sections.
+ * testsuite/ld-spu/ear.d,
+ * testsuite/ld-spu/icache1.d,
+ * testsuite/ld-spu/ovl.d,
+ * testsuite/ld-spu/ovl2.d: Select wanted objdump sections.
+
+2023-02-11 Alan Modra <amodra@gmail.com>
+
+ .debug sections without contents
+ * dwarf1.c (_bfd_dwarf1_find_nearest_line): Exclude .debug
+ sections without contents.
+
+2023-02-11 Aaron Merey <amerey@redhat.com>
+
+ gdb/source: Fix open_source_file error handling
+ open_source_file relies on errno to communicate the reason for a missing
+ source file.
+
+ open_source_file may also call debuginfod_find_source. It is possible
+ for debuginfod_find_source to set errno to a value unrelated to the
+ reason for a failed download.
+
+ This can result in bogus error messages being reported as the reason for
+ a missing source file. The following error message should instead be
+ "No such file or directory":
+
+ Temporary breakpoint 1, 0x00005555556f4de0 in main ()
+ (gdb) list
+ Downloading source file /usr/src/debug/glibc-2.36-8.fc37.x86_64/elf/<built-in>
+ 1 /usr/src/debug/glibc-2.36-8.fc37.x86_64/elf/<built-in>: Directory not empty.
+
+ Fix this by having open_source_file return a negative errno if it fails
+ to open a source file. Use this value to generate the error message
+ instead of errno.
+
+ Approved-By: Tom Tromey <tom@tromey.com>
+ Bug: https://sourceware.org/bugzilla/show_bug.cgi?id=29999
+
+2023-02-11 Aaron Merey <amerey@redhat.com>
+
+ Move implementation of perror_with_name to gdbsupport
+ gdbsupport/errors.h declares perror_with_name and leaves the
+ implementation to the clients.
+
+ However gdb and gdbserver's implementations are essentially the
+ same, resulting in unnecessary code duplication.
+
+ Fix this by implementing perror_with_name in gdbsupport. Add an
+ optional parameter for specifying the errno used to generate the
+ error message.
+
+ Also move the implementation of perror_string to gdbsupport since
+ perror_with_name requires it.
+
+ Approved-By: Tom Tromey <tom@tromey.com>
+
+2023-02-11 GDB Administrator <gdbadmin@sourceware.org>
+
+ Automatic date update in version.in
+
+2023-02-10 Andrew Burgess <andrew.burgess@embecosm.com>
+
+ GDB: Introduce limited array lengths while printing values
+ This commit introduces the idea of loading only part of an array in
+ order to print it, what I call "limited length" arrays.
+
+ The motivation behind this work is to make it possible to print slices
+ of very large arrays, where very large means bigger than
+ `max-value-size'.
+
+ Consider this GDB session with the current GDB:
+
+ (gdb) set max-value-size 100
+ (gdb) p large_1d_array
+ value requires 400 bytes, which is more than max-value-size
+ (gdb) p -elements 10 -- large_1d_array
+ value requires 400 bytes, which is more than max-value-size
+
+ notice that the request to print 10 elements still fails, even though 10
+ elements should be less than the max-value-size. With a patched version
+ of GDB:
+
+ (gdb) p -elements 10 -- large_1d_array
+ $1 = {0, 1, 2, 3, 4, 5, 6, 7, 8, 9...}
+
+ So now the print has succeeded. It also has loaded `max-value-size'
+ worth of data into value history, so the recorded value can be accessed
+ consistently:
+
+ (gdb) p -elements 10 -- $1
+ $2 = {0, 1, 2, 3, 4, 5, 6, 7, 8, 9...}
+ (gdb) p $1
+ $3 = {0, 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15, 16, 17, 18, 19,
+ 20, 21, 22, 23, 24, <unavailable> <repeats 75 times>}
+ (gdb)
+
+ Accesses with other languages work similarly, although for Ada only
+ C-style [] array element/dimension accesses use history. For both Ada
+ and Fortran () array element/dimension accesses go straight to the
+ inferior, bypassing the value history just as with C pointers.
+
+ Co-Authored-By: Maciej W. Rozycki <macro@embecosm.com>
+
+2023-02-10 Maciej W. Rozycki <macro@embecosm.com>
+
+ GDB/testsuite: Add `-nonl' option to `gdb_test'
+ Add a `-nonl' option to `gdb_test' making it possible to match output
+ from commands such as `output' that do not produce a new line sequence
+ at the end, e.g.:
+
+ (gdb) output 0
+ 0(gdb)
+
+2023-02-10 Maciej W. Rozycki <macro@embecosm.com>
+
+ GDB: Only make data actually retrieved into value history available
+ While it makes sense to allow accessing out-of-bounds elements in the
+ debuggee and see whatever there might happen to be there in memory (we
+ are a debugger and not a programming rules enforcement facility and we
+ want to make people's life easier in chasing bugs), e.g.:
+
+ (gdb) print one_hundred[-1]
+ $1 = 0
+ (gdb) print one_hundred[100]
+ $2 = 0
+ (gdb)
+
+ we shouldn't really pretend that we have any meaningful data around
+ values recorded in history (what these commands really retrieve are
+ current debuggee memory contents outside the original data accessed,
+ really confusing in my opinion). Mark values recorded in history as
+ such then and verify accesses to be in-range for them:
+
+ (gdb) print one_hundred[-1]
+ $1 = <unavailable>
+ (gdb) print one_hundred[100]
+ $2 = <unavailable>
+
+ Add a suitable test case, which also covers integer overflows in data
+ location calculation.
+
+ Approved-By: Tom Tromey <tom@tromey.com>
+
+2023-02-10 Maciej W. Rozycki <macro@embecosm.com>
+
+ GDB: Fix the mess with value byte/bit range types
+ Consistently use the LONGEST and ULONGEST types for value byte/bit
+ offsets and lengths respectively, avoiding silent truncation for ranges
+ exceeding the 32-bit span, which may cause incorrect matching. Also
+ report a conversion overflow on byte ranges that cannot be expressed in
+ terms of bits with these data types, e.g.:
+
+ (gdb) print one_hundred[1LL << 58]
+ Integer overflow in data location calculation
+ (gdb) print one_hundred[(-1LL << 58) - 1]
+ Integer overflow in data location calculation
+ (gdb)
+
+ Previously such accesses would be let through with unpredictable results
+ produced.
+
+2023-02-10 Maciej W. Rozycki <macro@embecosm.com>
+
+ GDB: Ignore `max-value-size' setting with value history accesses
+ We have an inconsistency in value history accesses where array element
+ accesses cause an error for entries exceeding the currently selected
+ `max-value-size' setting even where such accesses successfully complete
+ for elements located in the inferior, e.g.:
+
+ (gdb) p/d one
+ $1 = 0
+ (gdb) p/d one_hundred
+ $2 = {0 <repeats 100 times>}
+ (gdb) p/d one_hundred[99]
+ $3 = 0
+ (gdb) set max-value-size 25
+ (gdb) p/d one_hundred
+ value requires 100 bytes, which is more than max-value-size
+ (gdb) p/d one_hundred[99]
+ $7 = 0
+ (gdb) p/d $2
+ value requires 100 bytes, which is more than max-value-size
+ (gdb) p/d $2[99]
+ value requires 100 bytes, which is more than max-value-size
+ (gdb)
+
+ According to our documentation the `max-value-size' setting is a safety
+ guard against allocating an overly large amount of memory. Moreover a
+ statement in documentation says, concerning this setting, that: "Setting
+ this variable does not affect values that have already been allocated
+ within GDB, only future allocations." While in the implementer-speak
+ the sentence may be unambiguous I think the outside user may well infer
+ that the setting does not apply to values previously printed.
+
+ Therefore rather than just fixing this inconsistency it seems reasonable
+ to lift the setting for value history accesses, under an implication
+ that by having been retrieved from the debuggee they have already passed
+ the safety check. Do it then, by suppressing the value size check in
+ `value_copy' -- under an observation that if the original value has been
+ already loaded (i.e. it's not lazy), then it must have previously passed
+ said check -- making the last two commands succeed:
+
+ (gdb) p/d $2
+ $8 = {0 <repeats 100 times>}
+ (gdb) p/d $2 [99]
+ $9 = 0
+ (gdb)
+
+ Expand the testsuite accordingly, covering both value history handling
+ and the use of `value_copy' by `make_cv_value', used by Python code.
+
+2023-02-10 Maciej W. Rozycki <macro@embecosm.com>
+
+ GDB: Switch to using C++ standard integer type limits
+ Use <climits> instead of <limits.h> and ditch local fallback definitions
+ for minimum and maximum value macros provided by C++11. Add LONGEST_MAX
+ and LONGEST_MIN definitions.
+
+ Approved-By: Tom Tromey <tom@tromey.com>
+
+2023-02-10 Tom Tromey <tromey@adacore.com>
+
+ Ensure all DAP requests are keyword-only
+ Python functions implementing DAP requests should not use positional
+ parameters -- it only makes sense to call them with keyword arguments.
+ This patch changes the few remaining cases to start with the special
+ "*" parameter, following this rule.
+
+2023-02-10 Simon Marchi <simon.marchi@polymtl.ca>
+
+ gdb/testsuite: fix gdb.gdb/selftest.exp for native-extended-gdbserver
+ Following commit 4e2a80ba606 ("gdb/testsuite: expect SIGSEGV from top
+ GDB spawn id"), the next failure I get in gdb.gdb/selftest.exp, using
+ the native-extended-gdbserver, is:
+
+ (gdb) PASS: gdb.gdb/selftest.exp: send ^C to child process
+ signal SIGINT
+ Continuing with signal SIGINT.
+ FAIL: gdb.gdb/selftest.exp: send SIGINT signal to child process (timeout)
+
+ The problem is that in this gdb_test_multiple:
+
+ set description "send SIGINT signal to child process"
+ gdb_test_multiple "signal SIGINT" "$description" {
+ -re "^signal SIGINT\r\nContinuing with signal SIGINT.\r\nQuit\r\n.* $" {
+ pass "$description"
+ }
+ }
+
+ The "Continuing with signal SIGINT" portion is printed by the top GDB,
+ while the Quit portion is printed by the bottom GDB. As the
+ gdb_test_multiple is written, it expects both the the top GDB's spawn
+ id.
+
+ Fix this by splitting the gdb_test_multiple in two. The first one
+ expects the "Continuing with signal SIGINT" from the top GDB. The
+ second one expect "Quit" and the "(xgdb)" prompt from
+ $inferior_spawn_id. When debugging natively, this spawn id will be the
+ same as the top GDB's spawn id, but it's different when debugging with
+ GDBserver.
+
+ Change-Id: I689bd369a041b48f4dc9858d38bf977d09600da2
+
+2023-02-10 Tom Tromey <tom@tromey.com>
+
+ Use std::string in main_info
+ This changes main_info to use std::string. It removes some manual
+ memory management.
+
+2023-02-10 Tom de Vries <tdevries@suse.de>
+
+ [gdb/testsuite] Fix linespec ambiguity in gdb.base/longjmp.exp
+ PR testsuite/30103 reports the following failure on aarch64-linux
+ (ubuntu 22.04):
+ ...
+ (gdb) PASS: gdb.base/longjmp.exp: with_probes=0: pattern 1: next to longjmp
+ next
+ warning: Breakpoint address adjusted from 0x83dc305fef755015 to \
+ 0xffdc305fef755015.
+ Warning:
+ Cannot insert breakpoint 0.
+ Cannot access memory at address 0xffdc305fef755015
+
+ __libc_siglongjmp (env=0xaaaaaaab1018 <env>, val=1) at ./setjmp/longjmp.c:30
+ 30 }
+ (gdb) KFAIL: gdb.base/longjmp.exp: with_probes=0: pattern 1: gdb/26967 \
+ (PRMS: next over longjmp)
+ delete breakpoints
+ Delete all breakpoints? (y or n) y
+ (gdb) info breakpoints
+ No breakpoints or watchpoints.
+ (gdb) break 63
+ No line 63 in the current file.
+ Make breakpoint pending on future shared library load? (y or [n]) n
+ (gdb) FAIL: gdb.base/longjmp.exp: with_probes=0: pattern 2: setup: breakpoint \
+ at pattern start (got interactive prompt)
+ ...
+
+ The test-case intends to set the breakpoint on line number 63 in
+ gdb.base/longjmp.c.
+
+ It tries to do so by specifying "break 63", which specifies a line in the
+ "current source file".
+
+ Due to the KFAIL PR, gdb stopped in __libc_siglongjmp, and because of presence
+ of debug info, the "current source file" becomes glibc's ./setjmp/longjmp.c.
+
+ Consequently, setting the breakpoint fails.
+
+ Fix this by adding a $subdir/$srcfile: prefix to the breakpoint linespecs.
+
+ I've managed to reproduce the FAIL on x86_64/-m32, by installing the
+ glibc-32bit-debuginfo package. This allowed me to confirm the "current source
+ file" that is used:
+ ...
+ (gdb) KFAIL: gdb.base/longjmp.exp: with_probes=0: pattern 1: gdb/26967 \
+ (PRMS: next over longjmp)
+ info source^M
+ Current source file is ../setjmp/longjmp.c^M
+ ...
+
+ Tested on x86_64-linux, target boards unix/{-m64,-m32}.
+
+ Reported-By: Luis Machado <luis.machado@arm.com>
+ Reviewed-By: Tom Tromey <tom@tromey.com>
+
+ PR testsuite/30103
+ Bug: https://sourceware.org/bugzilla/show_bug.cgi?id=30103
+
+2023-02-10 Tom de Vries <tdevries@suse.de>
+
+ [gdb/cli] Add maint info frame-unwinders
+ Add a new command "maint info frame-unwinders":
+ ...
+ (gdb) help maint info frame-unwinders
+ List the frame unwinders currently in effect, starting with the highest \
+ priority.
+ ...
+
+ Output for i386:
+ ...
+ $ gdb -q -batch -ex "set arch i386" -ex "maint info frame-unwinders"
+ The target architecture is set to "i386".
+ dummy DUMMY_FRAME
+ dwarf2 tailcall TAILCALL_FRAME
+ inline INLINE_FRAME
+ i386 epilogue NORMAL_FRAME
+ dwarf2 NORMAL_FRAME
+ dwarf2 signal SIGTRAMP_FRAME
+ i386 stack tramp NORMAL_FRAME
+ i386 sigtramp SIGTRAMP_FRAME
+ i386 prologue NORMAL_FRAME
+ ...
+
+ Output for x86_64:
+ ...
+ $ gdb -q -batch -ex "set arch i386:x86-64" -ex "maint info frame-unwinders"
+ The target architecture is set to "i386:x86-64".
+ dummy DUMMY_FRAME
+ dwarf2 tailcall TAILCALL_FRAME
+ inline INLINE_FRAME
+ python NORMAL_FRAME
+ amd64 epilogue NORMAL_FRAME
+ i386 epilogue NORMAL_FRAME
+ dwarf2 NORMAL_FRAME
+ dwarf2 signal SIGTRAMP_FRAME
+ amd64 sigtramp SIGTRAMP_FRAME
+ amd64 prologue NORMAL_FRAME
+ i386 stack tramp NORMAL_FRAME
+ i386 sigtramp SIGTRAMP_FRAME
+ i386 prologue NORMAL_FRAME
+ ...
+
+ Tested on x86_64-linux.
+
+ Reviewed-By: Tom Tromey <tom@tromey.com>
+ Reviewed-By: Eli Zaretskii <eliz@gnu.org>
+
+2023-02-10 Tsukasa OI <research_trasio@irq.a4lg.com>
+
+ RISC-V: Reduce effective linker relaxation passses
+ Commit 43025f01a0c9 ("RISC-V: Improve link time complexity.") reduced the
+ time complexity of the linker relaxation but some code portions did not
+ reflect this change.
+
+ This commit fixes a comment describing each relaxation pass and reduces
+ actual number of passes for the RISC-V linker relaxation from 3 to 2.
+ Though it does not change the functionality, it marginally improves the
+ performance while linking large programs (with many relocations).
+
+ bfd/ChangeLog:
+
+ * elfnn-riscv.c (_bfd_riscv_relax_section): Fix a comment to
+ reflect current roles of each relaxation pass.
+
+ ld/ChangeLog:
+
+ * emultempl/riscvelf.em: Reduce the number of linker relaxation
+ passes from 3 to 2.
+
+2023-02-10 Alan Modra <amodra@gmail.com>
+
+ Fix mmo memory leaks
+ The main one here is the section buffer, which can be quite large.
+ By using alloc rather than malloc we can leave tidying memory to the
+ generic bfd code when the bfd is closed. bfd_check_format also
+ releases memory when object_p fails, so while it wouldn't be wrong
+ to bfd_release at bad_format_free in mmo_object_p, it's a little extra
+ code and work for no gain.
+
+ * mmo.c (mmo_object_p): bfd_alloc rather than bfd_malloc
+ lop_stab_symbol. Don't free/release on error.
+ (mmo_get_spec_section): bfd_zalloc rather than bfd_zmalloc
+ section buffer.
+ (mmo_scan): Free fname on another error path.
+
+2023-02-10 Alan Modra <amodra@gmail.com>
+
+ Local label checks in integer_constant
+ "Local labels are never absolute" says the comment. Except when they
+ are. Testcase
+ .offset
+ 0:
+ a=0b
+ I don't see any particular reason to disallow local labels inside
+ struct definitions, so delete the comment and assertions.
+
+ * expr.c (integer_constant): Delete local label assertions.
+
+2023-02-10 Jan Beulich <jbeulich@suse.com>
+
+ x86: drop use of VEX3SOURCES
+ The attribute really specifies that the sum of register and memory
+ operands is 4. Express it like that in most places, while using the 2nd
+ (apart from XOP) CPU feature flags (FMA4) in reversed operand matching
+ logic.
+
+ With the use in build_modrm_byte() gone, part of an assertion there
+ also becomes meaningless - simplify that at the same time.
+
+ With all uses of the opcode modifier field gone, also drop that.
+
+2023-02-10 Jan Beulich <jbeulich@suse.com>
+
+ x86: drop use of XOP2SOURCES
+ The few XOP insns which used it wrongly didn't have VexVVVV specified.
+ With that added, the only further missing piece to use more generic code
+ elsewhere is SwapSources - see e.g. the BMI2 insns for similar operand
+ patterns.
+
+ With the only users gone, drop the #define as well as the special case
+ code.
+
+2023-02-10 Jan Beulich <jbeulich@suse.com>
+
+ x86: limit use of XOP2SOURCES
+ The VPROT* forms with an immediate operand are entirely standard in the
+ way their ModR/M bytes are built. There's no reason to invoke special
+ case code. With that the handling of an immediate there can also be
+ dropped; it was partially bogus anyway, as in its "no memory operands"
+ portion it ignores the possibility of an immediate operand (which was
+ okay only because that case was already handled by more generic code).
+
+2023-02-10 Jan Beulich <jbeulich@suse.com>
+
+ x86: move (and rename) opcodespace attribute
+ This really isn't a "modifier" and rather ought to live next to the base
+ opcode anyway. Use the bits we presently have available to fit in the
+ field, renaming it to opcode_space. As an intended side effect this
+ helps readability at the use sites, by shortening the references quite a
+ bit.
+
+ In generated code arrange for human readable output, by using the
+ SPACE_* constants there rather than raw numbers. This may aid debugging
+ down the road.
+
+2023-02-10 Jan Beulich <jbeulich@suse.com>
+
+ x86: simplify a few expressions
+ Fold adjacent comparisons when, by ORing in a certain mask, the same
+ effect can be achieved by a single one. In load_insn_p() this extends
+ to further uses of an already available local variable.
+
+2023-02-10 Jan Beulich <jbeulich@suse.com>
+
+ x86: improve special casing of certain insns
+ Now that we have identifiers for the mnemonic strings we can avoid
+ opcode based comparisons, for (in many cases) being more expensive and
+ (in a few cases) being a little fragile and not self-documenting.
+
+ Note that the MOV optimization can be engaged by the earlier LEA one,
+ and hence LEA also needs checking for there.
+
+2023-02-10 Alan Modra <amodra@gmail.com>
+
+ objcopy of mach-o indirect symbols
+ Anti-fuzzer measure. I'm not sure what the correct fix is for
+ objcopy. Probably the BFD_MACH_O_S_NON_LAZY_SYMBOL_POINTERS,
+ BFD_MACH_O_S_LAZY_SYMBOL_POINTERS and BFD_MACH_O_S_SYMBOL_STUBS
+ contents should be read.
+
+ * mach-o.c (bfd_mach_o_section_get_nbr_indirect): Omit sections
+ with NULL sec->indirect_syms.
+
+2023-02-10 GDB Administrator <gdbadmin@sourceware.org>
+
+ Automatic date update in version.in
+
+2023-02-09 Tom Tromey <tromey@adacore.com>
+
+ Add full display feature to dwarf-mode.el
+ I've found that I often use dwarf-mode with relatively small test
+ files. In this situation, it's handy to be able to expand all the
+ DWARF, rather than moving to each "..." separately and using C-u C-m.
+
+ This patch implements this feature. It also makes a couple of other
+ minor changes:
+
+ * I removed a stale FIXME from dwarf-mode. In practice I find I often
+ use "g" to restore the buffer to a pristine state; checking the file
+ mtime would work against this.
+
+ * I tightened the regexp in dwarf-insert-substructure. This prevents
+ the C-m binding from trying to re-read a DIE which has already been
+ expanded.
+
+ * Finally, I've bumped the dwarf-mode version number so that this
+ version can easily be installed using package.el.
+
+ 2023-02-09 Tom Tromey <tromey@adacore.com>
+
+ * dwarf-mode.el: Bump version to 1.8.
+ (dwarf-insert-substructure): Tighten regexp.
+ (dwarf-refresh-all): New defun.
+ (dwarf-mode-map): Bind "A" to dwarf-refresh-all.
+ (dwarf-mode): Remove old FIXME.
+
+2023-02-09 Tom Tromey <tom@tromey.com>
+
+ Fix comment in gdb.rust/fnfield.exp
+ gdb.rust/fnfield.exp has a comment that, I assume, I copied from some
+ other test. This patch fixes it.
+
+2023-02-09 Tom Tromey <tom@tromey.com>
+
+ Trivially simplify rust_language::print_enum
+ rust_language::print_enum computes:
+
+ int nfields = variant_type->num_fields ();
+
+ ... but then does not reuse this in one spot. This patch corrects the
+ oversight.
+
+2023-02-09 Roland McGrath <mcgrathr@google.com>
+
+ [aarch64] Avoid initializers for VLAs
+ Clang doesn't accept initializer syntax for variable-length
+ arrays in C. Just use memset instead.
+
+2023-02-09 Christina Schimpe <christina.schimpe@intel.com>
+
+ gdb, testsuite: Remove unnecessary call of "set print pretty on"
+ The command has no effect for the loading of GDB pretty printers and is
+ removed by this patch to avoid confusion.
+
+ Documentation for "set print pretty"
+ "Cause GDB to print structures in an indented format with one member per line"
+
+2023-02-09 Tom Tromey <tromey@adacore.com>
+
+ Increase size of main_type::nfields
+ main_type::nfields is a 'short', and has been for many years. PR
+ c++/29985 points out that 'short' is too narrow for an enum that
+ contains more than 2^15 constants.
+
+ This patch bumps the size of 'nfields'. To verify that the field
+ isn't directly used, it is also renamed. Note that this does not
+ affect the size of main_type on x86-64 Fedora 36. And, if it does
+ have a negative effect somewhere, it's worth considering that types
+ could be shrunk more drastically by using subclasses for the different
+ codes.
+
+ This is v2 of this patch, which has these changes:
+
+ * I changed nfields to 'unsigned', per Simon's request. I looked at
+ changing all the uses, but this quickly fans out into a very large
+ patch. (One additional tweak was needed, though.)
+
+ * I wrote a test case. I discovered that GCC cannot compile a large
+ enough C test case, so I resorted to using the DWARF assembler.
+ This test doesn't reproduce the crash, but it does fail without the
+ patch.
+
+ Bug: https://sourceware.org/bugzilla/show_bug.cgi?id=29985
+
+2023-02-09 Tom Tromey <tromey@adacore.com>
+
+ Remove mention of cooked_index_vector
+ I noticed a leftover mention of cooked_index_vector. This updates the
+ text.
+
+2023-02-09 Tom Tromey <tromey@adacore.com>
+
+ Let user C-c when waiting for DWARF index finalization
+ In PR gdb/29854, Simon pointed out that it would be good to be able to
+ use C-c when the DWARF cooked index is waiting for finalization. The
+ idea here is to be able to interrupt a command like "break" -- not to
+ stop the finalization process itself, which runs in a worker thread.
+
+ This patch implements this idea, by changing the index wait functions
+ to, by default, allow a quit. Polling is done, because there doesn't
+ seem to be a better way to interrupt a wait on a std::future.
+
+ For v2, I realized that the thread compatibility code in thread-pool.h
+ also needed an update.
+
+ Bug: https://sourceware.org/bugzilla/show_bug.cgi?id=29854
+
+2023-02-09 Alan Modra <amodra@gmail.com>
+
+ coff keep_relocs and keep_contents
+ keep_relocs is set by pe_ILF_save_relocs but not used anywhere in the
+ coff/pe code. It is tested by the xcoff backend but not set.
+
+ keep_contents is only used by the xcoff backend when dealing with
+ the .loader section, and it's easy enough to dispense with it there.
+ keep_contents is set in various places but that's fairly useless when
+ the contents aren't freed anyway until later linker support functions,
+ add_dynamic_symbols and check_dynamic_ar_symbols. There the contents
+ were freed if keep_contents wasn't set. I reckon we can free them
+ unconditionally.
+
+ * coff-bfd.h (struct coff_section_tdata): Delete keep_relocs
+ and keep_contents.
+ * peicode.h (pe_ILF_save_relocs): Don't set keep_relocs.
+ * xcofflink.c (xcoff_get_section_contents): Cache contents.
+ Return the contents. Update callers.
+ (_bfd_xcoff_canonicalize_dynamic_symtab): Don't set
+ keep_contents for .loader.
+ (xcoff_link_add_dynamic_symbols): Free .loader contents
+ unconditionally.
+ (xcoff_link_check_dynamic_ar_symbols): Likewise.
+
+2023-02-09 GDB Administrator <gdbadmin@sourceware.org>
+
+ Automatic date update in version.in
+
+2023-02-08 Alan Modra <amodra@gmail.com>
+
+ coff-sh.c keep_relocs, keep_contents and keep_syms
+ keep_relocs and keep_contents are unused nowadays except by
+ xcofflink.c, and I can't see a reason why keep_syms needs to be set.
+ The external syms are read and used by sh_relax_section and used by
+ sh_relax_delete_bytes. There doesn't appear to be any way that
+ freeing them will cause trouble.
+
+ * coff-sh.c (sh_relax_section): Don't set keep_relocs,
+ keep_contents or keep_syms.
+ (sh_relax_delete_bytes): Don't set keep_contents.
+
+2023-02-08 Alan Modra <amodra@gmail.com>
+
+ Memory leak in bfd_init_section_compress_status
+ * compress.c (bfd_init_section_compress_status): Free
+ uncompressed_buffer on error return.
+
+2023-02-08 Alan Modra <amodra@gmail.com>
+
+ Clear cached file size when bfd changed to BFD_IN_MEMORY
+ If file size is calculated by bfd_get_file_size, as it is by
+ _bfd_alloc_and_read calls in coff_object_p, then it is cached and when
+ pe_ILF_build_a_bfd converts an archive entry over to BFD_IN_MEMORY,
+ the file size is no longer valid. Found when attempting objdump -t on
+ a very small (27 bytes) ILF file and hitting the pr24707 fix (commit
+ 781152ec18f5). So, clear file size when setting BFD_IN_MEMORY on bfds
+ that may have been read. (It's not necessary in writable bfds,
+ because caching is ignored by bfd_get_size when bfd_write_p.)
+
+ I also think the PR 24707 fix is no longer neeeded. All of the
+ testcases in that PR and in PR24712 are caught earlier by file size
+ checks when reading the symbols from file. So I'm reverting that fix,
+ which just compared the size of an array of symbol pointers against
+ file size. That's only valid if on-disk symbols are larger than a
+ host pointer, so the test is better done in format-specific code.
+
+ bfd/
+ * coff-alpha.c (alpha_ecoff_get_elt_at_filepos): Clear cached
+ file size when making a BFD_IN_MEMORY bfd.
+ * opncls.c (bfd_make_readable): Likewise.
+ * peicode.h (pe_ILF_build_a_bfd): Likewise.
+ binutils/
+ PR 24707
+ * objdump.c (slurp_symtab): Revert PR24707 fix. Tidy.
+ (slurp_dynamic_symtab): Tidy.
+
+2023-02-08 Alan Modra <amodra@gmail.com>
+
+ Internal error at gas/expr.c:1814
+ This is the assertion
+ know (*input_line_pointer != ' ');
+ after calling operand.
+
+ The usual exit from operand calls SKIP_ALL_WHITESPACE.
+
+ * expr.c (operand): Call SKIP_ALL_WHITESPACE after call to expr.
+
+2023-02-08 Simon Marchi <simon.marchi@efficios.com>
+
+ gdb: give sentinel for user frames distinct IDs, register sentinel frames to the frame cache
+ The test gdb.base/frame-view.exp fails like this on AArch64:
+
+ frame^M
+ #0 baz (z1=hahaha, /home/simark/src/binutils-gdb/gdb/value.c:4056: internal-error: value_fetch_lazy_register: Assertion `next_frame != NULL' failed.^M
+ A problem internal to GDB has been detected,^M
+ further debugging may prove unreliable.^M
+ FAIL: gdb.base/frame-view.exp: with_pretty_printer=true: frame (GDB internal error)
+
+ The sequence of events leading to this is the following:
+
+ - When we create the user frame (the "select-frame view" command), we
+ create a sentinel frame just for our user-created frame, in
+ create_new_frame. This sentinel frame has the same id as the regular
+ sentinel frame.
+
+ - When printing the frame, after doing the "select-frame view" command,
+ the argument's pretty printer is invoked, which does an inferior
+ function call (this is the point of the test). This clears the frame
+ cache, including the "real" sentinel frame, which sets the
+ sentinel_frame global to nullptr.
+
+ - Later in the frame-printing process (when printing the second
+ argument), the auto-reinflation mechanism re-creates the user frame
+ by calling create_new_frame again, creating its own special sentinel
+ frame again. However, note that the "real" sentinel frame, the
+ sentinel_frame global, is still nullptr. If the selected frame had
+ been a regular frame, we would have called get_current_frame at some
+ point during the reinflation, which would have re-created the "real"
+ sentinel frame. But it's not the case when reinflating a user frame.
+
+ - Deep down the stack, something wants to fill in the unwind stop
+ reason for frame 0, which requires trying to unwind frame 1. This
+ leads us to trying to unwind the PC of frame 1:
+
+ #0 gdbarch_unwind_pc (gdbarch=0xffff8d010080, next_frame=...) at /home/simark/src/binutils-gdb/gdb/gdbarch.c:2955
+ #1 0x000000000134569c in dwarf2_tailcall_sniffer_first (this_frame=..., tailcall_cachep=0xffff773fcae0, entry_cfa_sp_offsetp=0xfffff7f7d450)
+ at /home/simark/src/binutils-gdb/gdb/dwarf2/frame-tailcall.c:390
+ #2 0x0000000001355d84 in dwarf2_frame_cache (this_frame=..., this_cache=0xffff773fc928) at /home/simark/src/binutils-gdb/gdb/dwarf2/frame.c:1089
+ #3 0x00000000013562b0 in dwarf2_frame_unwind_stop_reason (this_frame=..., this_cache=0xffff773fc928) at /home/simark/src/binutils-gdb/gdb/dwarf2/frame.c:1101
+ #4 0x0000000001990f64 in get_prev_frame_always_1 (this_frame=...) at /home/simark/src/binutils-gdb/gdb/frame.c:2281
+ #5 0x0000000001993034 in get_prev_frame_always (this_frame=...) at /home/simark/src/binutils-gdb/gdb/frame.c:2376
+ #6 0x000000000199b814 in get_frame_unwind_stop_reason (frame=...) at /home/simark/src/binutils-gdb/gdb/frame.c:3051
+ #7 0x0000000001359cd8 in dwarf2_frame_cfa (this_frame=...) at /home/simark/src/binutils-gdb/gdb/dwarf2/frame.c:1356
+ #8 0x000000000132122c in dwarf_expr_context::execute_stack_op (this=0xfffff7f80170, op_ptr=0xffff8d8883ee "\217\002", op_end=0xffff8d8883ee "\217\002")
+ at /home/simark/src/binutils-gdb/gdb/dwarf2/expr.c:2110
+ #9 0x0000000001317b30 in dwarf_expr_context::eval (this=0xfffff7f80170, addr=0xffff8d8883ed "\234\217\002", len=1) at /home/simark/src/binutils-gdb/gdb/dwarf2/expr.c:1239
+ #10 0x000000000131d68c in dwarf_expr_context::execute_stack_op (this=0xfffff7f80170, op_ptr=0xffff8d88840e "", op_end=0xffff8d88840e "") at /home/simark/src/binutils-gdb/gdb/dwarf2/expr.c:1811
+ #11 0x0000000001317b30 in dwarf_expr_context::eval (this=0xfffff7f80170, addr=0xffff8d88840c "\221p", len=2) at /home/simark/src/binutils-gdb/gdb/dwarf2/expr.c:1239
+ #12 0x0000000001314c3c in dwarf_expr_context::evaluate (this=0xfffff7f80170, addr=0xffff8d88840c "\221p", len=2, as_lval=true, per_cu=0xffff90b03700, frame=..., addr_info=0x0,
+ type=0xffff8f6c8400, subobj_type=0xffff8f6c8400, subobj_offset=0) at /home/simark/src/binutils-gdb/gdb/dwarf2/expr.c:1078
+ #13 0x000000000149f9e0 in dwarf2_evaluate_loc_desc_full (type=0xffff8f6c8400, frame=..., data=0xffff8d88840c "\221p", size=2, per_cu=0xffff90b03700, per_objfile=0xffff9070b980,
+ subobj_type=0xffff8f6c8400, subobj_byte_offset=0, as_lval=true) at /home/simark/src/binutils-gdb/gdb/dwarf2/loc.c:1513
+ #14 0x00000000014a0100 in dwarf2_evaluate_loc_desc (type=0xffff8f6c8400, frame=..., data=0xffff8d88840c "\221p", size=2, per_cu=0xffff90b03700, per_objfile=0xffff9070b980, as_lval=true)
+ at /home/simark/src/binutils-gdb/gdb/dwarf2/loc.c:1557
+ #15 0x00000000014aa584 in locexpr_read_variable (symbol=0xffff8f6cd770, frame=...) at /home/simark/src/binutils-gdb/gdb/dwarf2/loc.c:3052
+
+ - AArch64 defines a special "prev register" function,
+ aarch64_dwarf2_prev_register, to handle unwinding the PC. This
+ function does
+
+ frame_unwind_register_unsigned (this_frame, AARCH64_LR_REGNUM);
+
+ - frame_unwind_register_unsigned ultimately creates a lazy register
+ value, saving the frame id of this_frame->next. this_frame is the
+ user-created frame, to this_frame->next is the special sentinel frame
+ we created for it. So the saved ID is the sentinel frame ID.
+
+ - When time comes to un-lazify the value, value_fetch_lazy_register
+ calls frame_find_by_id, to find the frame with the ID we saved.
+
+ - frame_find_by_id sees it's the sentinel frame ID, so returns the
+ sentinel_frame global, which is, if you remember, nullptr.
+
+ - We hit the `gdb_assert (next_frame != NULL)` assertion in
+ value_fetch_lazy_register.
+
+ The issues I see here are:
+
+ - The ID of the sentinel frame created for the user-created frame is
+ not distinguishable from the ID of the regular sentinel frame. So
+ there's no way frame_find_by_id could find the right frame, in
+ value_fetch_lazy_register.
+ - Even if they had distinguishable IDs, sentinel frames created for
+ user frames are not registered anywhere, so there's no easy way
+ frame_find_by_id could find it.
+
+ This patch addresses these two issues:
+
+ - Give sentinel frames created for user frames their own distinct IDs
+ - Register sentinel frames in the frame cache, so they can be found
+ with frame_find_by_id.
+
+ I initially had this split in two patches, but I then found that it was
+ easier to explain as a single patch.
+
+ Rergarding the first part of the change: with this patch, the sentinel
+ frames created for user frames (in create_new_frame) still have
+ stack_status == FID_STACK_SENTINEL, but their code_addr and stack_addr
+ fields are now filled with the addresses used to create the user frame.
+ This ensures this sentinel frame ID is different from the "target"
+ sentinel frame ID, as well as any other "user" sentinel frame ID. If
+ the user tries to create the same frame, with the same addresses,
+ multiple times, create_sentinel_frame just reuses the existing frame.
+ So we won't end up with multiple user sentinels with the same ID.
+
+ Regular "target" sentinel frames remain with code_addr and stack_addr
+ unset.
+
+ The concrete changes for that part are:
+
+ - Remove the sentinel_frame_id constant, since there isn't one
+ "sentinel frame ID" now. Add the frame_id_build_sentinel function
+ for building sentinel frame IDs and a is_sentinel_frame_id function
+ to check if a frame id represents a sentinel frame.
+ - Replace the sentinel_frame_id check in frame_find_by_id with a
+ comparison to `frame_id_build_sentinel (0, 0)`. The sentinel_frame
+ global is meant to contain a reference to the "target" sentinel, so
+ the one with addresses (0, 0).
+ - Add stack and code address parameters to create_sentinel_frame, to be
+ able to create the various types of sentinel frames.
+ - Adjust get_current_frame to create the regular "target" sentinel.
+ - Adjust create_new_frame to create a sentinel with the ID specific to
+ the created user frame.
+ - Adjust sentinel_frame_prev_register to get the sentinel frame ID from
+ the frame_info object, since there isn't a single "sentinel frame ID"
+ now.
+ - Change get_next_frame_sentinel_okay to check for a
+ sentinel-frame-id-like frame ID, rather than for sentinel_frame
+ specifically, since this function could be called with another
+ sentinel frame (and we would want the assert to catch it).
+
+ The rest of the change is about registering the sentinel frame in the
+ frame cache:
+
+ - Change frame_stash_add's assertion to allow sentinel frame levels
+ (-1).
+ - Make create_sentinel_frame add the frame to the frame cache.
+ - Change the "sentinel_frame != NULL" check in reinit_frame_cache for a
+ check that the frame stash is not empty. The idea is that if we only
+ have some user-created frames in the cache when reinit_frame_cache is
+ called, we probably want to emit the frames invalid annotation. The
+ goal of that check is to avoid unnecessary repeated annotations, I
+ suppose, so the "frame cache not empty" check should achieve that.
+
+ After this change, I think we could theoritically get rid of the
+ sentienl_frame global. That sentinel frame could always be found by
+ looking up `frame_id_build_sentinel (0, 0)` in the frame cache.
+ However, I left the global there to avoid slowing the typical case down
+ for nothing. I however, noted in its comment that it is an
+ optimization.
+
+ With this fix applied, the gdb.base/frame-view.exp now passes for me on
+ AArch64. value_of_register_lazy now saves the special sentinel frame ID
+ in the value, and value_fetch_lazy_register is able to find that
+ sentinel frame after the frame cache reinit and after the user-created
+ frame was reinflated.
+
+ Tested-By: Alexandra Petlanova Hajkova <ahajkova@redhat.com>
+ Tested-By: Luis Machado <luis.machado@arm.com>
+ Change-Id: I8b77b3448822c8aab3e1c3dda76ec434eb62704f
+
+2023-02-08 Simon Marchi <simon.marchi@efficios.com>
+
+ gdb: call frame unwinders' dealloc_cache methods through destroying the frame cache
+ Currently, some frame resources are deallocated by iterating on the
+ frame chain (starting from the sentinel), calling dealloc_cache. The
+ problem is that user-created frames are not part of that chain, so we
+ never call dealloc_cache for them.
+
+ I propose to make it so the dealloc_cache callbacks are called when the
+ frames are removed from the frame_stash hash table, by registering a
+ deletion function to the hash table. This happens when
+ frame_stash_invalidate is called by reinit_frame_cache. This way, all
+ frames registered in the cache will get their unwinder's dealloc_cache
+ callbacks called.
+
+ Note that at the moment, the sentinel frames are not registered in the
+ cache, so we won't call dealloc_cache for them. However, it's just a
+ theoritical problem, because the sentinel frame unwinder does not
+ provide this callback. Also, a subsequent patch will change things so
+ that sentinel frames are registered to the cache.
+
+ I moved the obstack_free / obstack_init pair below the
+ frame_stash_invalidate call in reinit_frame_cache, because I assumed
+ that some dealloc_cache would need to access some data on that obstack,
+ so it would be better to free it after clearing the hash table.
+
+ Change-Id: If4f9b38266b458c4e2f7eb43e933090177c22190
+
+2023-02-08 Tom Tromey <tom@tromey.com>
+
+ Remove block.h includes from some tdep files
+ A few tdep files include block.h but do not need to. This patch
+ removes the inclusions. I checked that this worked correctly by
+ examining the resulting .Po file to make sure that block.h was not
+ being included by some other route.
+
+ Don't include block.h from expop.h
+ expop.h needs block.h for a single inline function. However, I don't
+ think most of the check_objfile functions need to be defined in the
+ header (just the templates). This patch moves the one offending
+ function and removes the include.
+
+2023-02-08 Pedro Alves <pedro@palves.net>
+
+ Simplify interp::exec / interp_exec - let exceptions propagate
+ This patch implements a simplication that I suggested here:
+
+ https://sourceware.org/pipermail/gdb-patches/2022-March/186320.html
+
+ Currently, the interp::exec virtual method interface is such that
+ subclass implementations must catch exceptions and then return them
+ via normal function return.
+
+ However, higher up the in chain, for the CLI we get to
+ interpreter_exec_cmd, which does:
+
+ for (i = 1; i < nrules; i++)
+ {
+ struct gdb_exception e = interp_exec (interp_to_use, prules[i]);
+
+ if (e.reason < 0)
+ {
+ interp_set (old_interp, 0);
+ error (_("error in command: \"%s\"."), prules[i]);
+ }
+ }
+
+ and for MI we get to mi_cmd_interpreter_exec, which has:
+
+ void
+ mi_cmd_interpreter_exec (const char *command, char **argv, int argc)
+ {
+ ...
+ for (i = 1; i < argc; i++)
+ {
+ struct gdb_exception e = interp_exec (interp_to_use, argv[i]);
+
+ if (e.reason < 0)
+ error ("%s", e.what ());
+ }
+ }
+
+ Note that if those errors are reached, we lose the original
+ exception's error code. I can't see why we'd want that.
+
+ And, I can't see why we need to have interp_exec catch the exception
+ and return it via the normal return path. That's normally needed when
+ we need to handle propagating exceptions across C code, like across
+ readline or ncurses, but that's not the case here.
+
+ It seems to me that we can simplify things by removing some
+ try/catch-ing and just letting exceptions propagate normally.
+
+ Note, the "error in command" error shown above, which only exists in
+ the CLI interpreter-exec command, is only ever printed AFAICS if you
+ run "interpreter-exec console" when the top level interpreter is
+ already the console/tui. Like:
+
+ (gdb) interpreter-exec console "foobar"
+ Undefined command: "foobar". Try "help".
+ error in command: "foobar".
+
+ You won't see it with MI's "-interpreter-exec console" from a top
+ level MI interpreter:
+
+ (gdb)
+ -interpreter-exec console "foobar"
+ &"Undefined command: \"foobar\". Try \"help\".\n"
+ ^error,msg="Undefined command: \"foobar\". Try \"help\"."
+ (gdb)
+
+ nor with MI's "-interpreter-exec mi" from a top level MI interpreter:
+
+ (gdb)
+ -interpreter-exec mi "-foobar"
+ ^error,msg="Undefined MI command: foobar",code="undefined-command"
+ ^done
+ (gdb)
+
+ in both these cases because MI's -interpreter-exec just does:
+
+ error ("%s", e.what ());
+
+ You won't see it either when running an MI command with the CLI's
+ "interpreter-exec mi":
+
+ (gdb) interpreter-exec mi "-foobar"
+ ^error,msg="Undefined MI command: foobar",code="undefined-command"
+ (gdb)
+
+ This last case is because MI's interp::exec implementation never
+ returns an error:
+
+ gdb_exception
+ mi_interp::exec (const char *command)
+ {
+ mi_execute_command_wrapper (command);
+ return gdb_exception ();
+ }
+
+ Thus I think that "error in command" error is pretty pointless, and
+ since it simplifies things to not have it, the patch just removes it.
+
+ The patch also ends up addressing an old FIXME.
+
+ Change-Id: I5a6432a80496934ac7127594c53bf5221622e393
+ Approved-By: Tom Tromey <tromey@adacore.com>
+ Approved-By: Kevin Buettner <kevinb@redhat.com>
+
+2023-02-08 Tom Tromey <tromey@adacore.com>
+
+ Avoid FAILs in gdb.compile
+ Many gdb.compile C++ tests fail for me on Fedora 36. I think these
+ are largely bugs in the plugin, though I didn't investigate too
+ deeply. Once one failure is seen, this often cascades and sometimes
+ there are many timeouts.
+
+ For example, this can happen:
+
+ (gdb) compile code var = a->get_var ()
+ warning: Could not find symbol "_ZZ9_gdb_exprP10__gdb_regsE1a" for compiled module "/tmp/gdbobj-0xdI6U/out2.o".
+ 1 symbols were missing, cannot continue.
+
+ I think this is probably a plugin bug because, IIRC, in theory these
+ symbols should be exempt from a lookup via gdb.
+
+ This patch arranges to catch any catastrophic failure and then simply
+ exit the entire .exp file.
+
+2023-02-08 Tom Tromey <tromey@adacore.com>
+
+ Don't let .gdb_history file cause failures
+ I had a .gdb_history file in my testsuite directory in the build tree,
+ and this provoked a failure in gdbhistsize-history.exp. It seems
+ simple to prevent this file from causing a failure.
+
+2023-02-08 Tom Tromey <tromey@adacore.com>
+
+ Merge fixup_section and fixup_symbol_section
+ fixup_symbol_section delegates all its work to fixup_section, so merge
+ the two.
+
+ Because there is only a single caller to fixup_symbol_section, we can
+ also remove some of the introductory logic. For example, this will
+ never be called with a NULL objfile any more.
+
+ The LOC_BLOCK case can be removed, because such symbols are handled by
+ the buildsym code now.
+
+ Finally, a symbol can only appear in a SEC_ALLOC section, so the loop
+ is modified to skip sections that do not have this flag set.
+
+2023-02-08 Tom Tromey <tromey@adacore.com>
+
+ Remove most calls to fixup_symbol_section
+ Nearly every call to fixup_symbol_section in gdb is incorrect, and if
+ any such call has an effect, it's purely by happenstance.
+
+ fixup_section has a long comment explaining that the call should only
+ be made before runtime section offsets are applied. And, the loop in
+ this code (the fallback loop -- the minsym lookup code is "ok") is
+ careful to remove these offsets before comparing addresses.
+
+ However, aside from a single call in dwarf2/read.c, every call in gdb
+ is actually done after section offsets have been applied. So, these
+ calls are incorrect.
+
+ Now, these calls could be made when the symbol is created. I
+ considered this approach, but I reasoned that the code has been this
+ way for many years, seemingly without ill effect. So, instead I chose
+ to simply remove the offending calls.
+
+2023-02-08 Tom Tromey <tromey@adacore.com>
+
+ Set section index when setting a symbol's block
+ When a symbol's block is set, the block has the runtime section offset
+ applied. So, it seems to me that the symbol implicitly is in the same
+ section as the block. Therefore, this patch sets the symbol's section
+ index at this same spot.
+
+ Remove compunit_symtab::m_block_line_section
+ The previous patch hard-coded SECT_OFF_TEXT into the buildsym code.
+ After this, it's clear that there is only one caller of
+ compunit_symtab::set_block_line_section, and it always passes
+ SECT_OFF_TEXT. So, remove compunit_symtab::m_block_line_section and
+ use SECT_OFF_TEXT instead.
+
+ Do not pass section index to end_compunit_symtab
+ Right now, the section index passed to end_compunit_symtab is always
+ SECT_OFF_TEXT. Remove this parameter and simply always use
+ SECT_OFF_TEXT.
+
+2023-02-08 Tom Tromey <tromey@adacore.com>
+
+ Set section indices when symbols are made
+ Most places in gdb that create a new symbol will apply a section
+ offset to the address. It seems to me that the choice of offset here
+ is also an implicit choice of the section. This is particularly true
+ if you examine fixup_section, which notes that it must be called
+ before such offsets are applied -- meaning that if any such call has
+ an effect, it's purely by accident.
+
+ This patch cleans up this area by tracking the section index and
+ applying it to a symbol when the address is set. This is done for
+ nearly every case -- the remaining cases will be handled in later
+ patches.
+
+2023-02-08 Tom Tromey <tromey@adacore.com>
+
+ Use default section indexes in fixup_symbol_section
+ If fixup_section does not find a matching section, it arbitrarily
+ chooses the first one. However, it seems better to make this default
+ depend on the type of the symbol -- i.e., default data symbols to
+ .data and text symbols to .text.
+
+ I've also made fixup_section static, as it only has one caller.
+
+2023-02-08 Tom Tromey <tom@tromey.com>
+
+ Simplify checks of cooked_index
+ This changes the cooked_index_functions to avoid an extra null check
+ now that checked_static_cast allows a null argument.
+
+ Approved-By: Simon Marchi <simon.marchi@efficios.com>
+
+2023-02-08 Tom de Vries <tdevries@suse.de>
+
+ [gdb/testsuite] Use maint ignore-probes in gdb.base/longjmp.exp
+ Test-case gdb.base/longjmp.exp handles both the case that there is a libc
+ longjmp probe, and the case that there isn't.
+
+ However, it only tests one of the two cases.
+
+ Use maint ignore-probes to test both cases, if possible.
+
+ Tested on x86_64-linux.
+
+2023-02-08 Tom de Vries <tdevries@suse.de>
+
+ [gdb/testsuite] Use maint ignore-probes in gdb.base/solib-corrupted.exp
+ Test-case gdb.base/solib-corrupted.exp only works for a glibc without probes
+ interface, otherwise we run into:
+ ...
+ XFAIL: gdb.base/solib-corrupted.exp: info probes
+ UNTESTED: gdb.base/solib-corrupted.exp: GDB is using probes
+ ...
+
+ Fix this by using maint ignore-probes to simulate the absence of the relevant
+ probes.
+
+ Also, it requires glibc debuginfo, and if not present, it produces an XFAIL:
+ ...
+ XFAIL: gdb.base/solib-corrupted.exp: make solibs looping
+ UNTESTED: gdb.base/solib-corrupted.exp: no _r_debug symbol has been found
+ ...
+ This is incorrect, because an XFAIL indicates a known problem in the
+ environment. In this case, there is no problem: the environment is
+ functioning as expected when glibc debuginfo is not installed.
+
+ Fix this by using UNSUPPORTED instead, and make the message less cryptic:
+ ...
+ UNSUPPORTED: gdb.base/solib-corrupted.exp: make solibs looping \
+ (glibc debuginfo required)
+ ...
+
+ Finally, with glibc debuginfo present, we run into:
+ ...
+ (gdb) PASS: gdb.base/solib-corrupted.exp: make solibs looping
+ info sharedlibrary^M
+ warning: Corrupted shared library list: 0x7ffff7ffe750 != 0x0^M
+ From To Syms Read Shared Object Library^M
+ 0x00007ffff7dd4170 0x00007ffff7df4090 Yes /lib64/ld-linux-x86-64.so.2^M
+ (gdb) FAIL: gdb.base/solib-corrupted.exp: corrupted list \
+ (shared library list corrupted)
+ ...
+ due to commit 44288716537 ("gdb, testsuite: extend gdb_test_multiple checks").
+
+ Fix this by rewriting into gdb_test_multiple and using -early.
+
+ Tested on x86_64-linux, with and without glibc debuginfo installed.
+
+2023-02-08 Vladimir Mezentsev <vladimir.mezentsev@oracle.com>
+
+ gprofng: fix SIGSEGV when processing unusual dwarf
+ gprofng/ChangeLog
+ 2023-02-07 Vladimir Mezentsev <vladimir.mezentsev@oracle.com>
+
+ PR gprofng/30093
+ * src/Dwarf.cc: add nullptr check.
+ * src/DwarfLib.cc: Likewise.
+
+2023-02-08 Alan Modra <amodra@gmail.com>
+
+ Re: Resetting section vma after _bfd_dwarf2_find_nearest_line
+ f.bfd_ptr is set too early to be a reliable indicator of good debug
+ info.
+
+ * dwarf2.c (_bfd_dwarf2_slurp_debug_info): Correct test for
+ debug info being previously found.
+
+2023-02-08 GDB Administrator <gdbadmin@sourceware.org>
+
+ Automatic date update in version.in
+
+2023-02-07 Andrew Burgess <aburgess@redhat.com>
+
+ gdb: fix display of thread condition for multi-location breakpoints
+ This commit addresses the issue in PR gdb/30087.
+
+ If a breakpoint with multiple locations has a thread condition, then
+ the 'info breakpoints' output is a little messed up, here's an example
+ of the current output:
+
+ (gdb) break foo thread 1
+ Breakpoint 2 at 0x401114: foo. (3 locations)
+ (gdb) break bar thread 1
+ Breakpoint 3 at 0x40110a: file /tmp/src/gdb/testsuite/gdb.base/thread-bp-multi-loc.c, line 32.
+ (gdb) info breakpoints
+ Num Type Disp Enb Address What
+ 2 breakpoint keep y <MULTIPLE> thread 1
+ stop only in thread 1
+ 2.1 y 0x0000000000401114 in foo at /tmp/src/gdb/testsuite/gdb.base/thread-bp-multi-loc.c:25
+ 2.2 y 0x0000000000401146 in foo at /tmp/src/gdb/testsuite/gdb.base/thread-bp-multi-loc.c:25
+ 2.3 y 0x0000000000401168 in foo at /tmp/src/gdb/testsuite/gdb.base/thread-bp-multi-loc.c:25
+ 3 breakpoint keep y 0x000000000040110a in bar at /tmp/src/gdb/testsuite/gdb.base/thread-bp-multi-loc.c:32 thread 1
+ stop only in thread 1
+
+ Notice that, at the end of the location for breakpoint 3, the 'thread
+ 1' condition is printed, but this is then repeated on the next line
+ with 'stop only in thread 1'.
+
+ In contrast, for breakpoint 2, the 'thread 1' appears randomly, in the
+ "What" column, though slightly offset, non of the separate locations
+ have the 'thread 1' information. Additionally for breakpoint 2 we
+ also get a 'stop only in thread 1' line.
+
+ There's two things going on here. First the randomly placed 'thread
+ 1' for breakpoint 2 is due to a bug in print_one_breakpoint_location,
+ where we check the variable part_of_multiple instead of
+ header_of_multiple.
+
+ If I fix this oversight, then the output is now:
+
+ (gdb) break foo thread 1
+ Breakpoint 2 at 0x401114: foo. (3 locations)
+ (gdb) break bar thread 1
+ Breakpoint 3 at 0x40110a: file /tmp/src/gdb/testsuite/gdb.base/thread-bp-multi-loc.c, line 32.
+ (gdb) info breakpoints
+ Num Type Disp Enb Address What
+ 2 breakpoint keep y <MULTIPLE>
+ stop only in thread 1
+ 2.1 y 0x0000000000401114 in foo at /tmp/src/gdb/testsuite/gdb.base/thread-bp-multi-loc.c:25 thread 1
+ 2.2 y 0x0000000000401146 in foo at /tmp/src/gdb/testsuite/gdb.base/thread-bp-multi-loc.c:25 thread 1
+ 2.3 y 0x0000000000401168 in foo at /tmp/src/gdb/testsuite/gdb.base/thread-bp-multi-loc.c:25 thread 1
+ 3 breakpoint keep y 0x000000000040110a in bar at /tmp/src/gdb/testsuite/gdb.base/thread-bp-multi-loc.c:32 thread 1
+ stop only in thread 1
+
+ The 'thread 1' condition is now displayed at the end of each location,
+ which makes the output the same for single location breakpoints and
+ multi-location breakpoints.
+
+ However, there's still some duplication here. Both breakpoints 2 and
+ 3 include a 'stop only in thread 1' line, and it feels like the
+ additional 'thread 1' is redundant. In fact, there's a comment to
+ this very effect in the code:
+
+ /* FIXME: This seems to be redundant and lost here; see the
+ "stop only in" line a little further down. */
+
+ So, lets fix this FIXME. The new plan is to remove all the trailing
+ 'thread 1' markers from the CLI output, we now get this:
+
+ (gdb) break foo thread 1
+ Breakpoint 2 at 0x401114: foo. (3 locations)
+ (gdb) break bar thread 1
+ Breakpoint 3 at 0x40110a: file /tmp/src/gdb/testsuite/gdb.base/thread-bp-multi-loc.c, line 32.
+ (gdb) info breakpoints
+ Num Type Disp Enb Address What
+ 2 breakpoint keep y <MULTIPLE>
+ stop only in thread 1
+ 2.1 y 0x0000000000401114 in foo at /tmp/src/gdb/testsuite/gdb.base/thread-bp-multi-loc.c:25
+ 2.2 y 0x0000000000401146 in foo at /tmp/src/gdb/testsuite/gdb.base/thread-bp-multi-loc.c:25
+ 2.3 y 0x0000000000401168 in foo at /tmp/src/gdb/testsuite/gdb.base/thread-bp-multi-loc.c:25
+ 3 breakpoint keep y 0x000000000040110a in bar at /tmp/src/gdb/testsuite/gdb.base/thread-bp-multi-loc.c:32
+ stop only in thread 1
+
+ All of the above points are also true for the Ada 'task' breakpoint
+ condition, and the changes I've made also update how the task
+ information is printed, though in the case of the Ada task there was
+ no 'stop only in task XXX' line printed, so I've added one of those.
+
+ Obviously it can't be quite that easy. For MI backwards compatibility
+ I've retained the existing code (but now only for MI like outputs),
+ which ensures we should generate backwards compatible output.
+
+ I've extended an Ada test to cover the new task related output, and
+ updated all the tests I could find that checked for the old output.
+
+ Bug: https://sourceware.org/bugzilla/show_bug.cgi?id=30087
+
+ Approved-By: Pedro Alves <pedro@palves.net>
+
+2023-02-07 Nick Clifton <nickc@redhat.com>
+
+ Fix documentation of the 'n' symbol type displayed by nm.
+ PR 30080 * doc/binutils.texi (nm): Update description of the 'n' symbol type.
+
+2023-02-07 Tom de Vries <tdevries@suse.de>
+
+ [gdb/testsuite] Improve untested message in gdb.ada/finish-var-size.exp
+ I came across:
+ ...
+ UNTESTED: gdb.ada/finish-var-size.exp: GCC too told for this test
+ ...
+ The message only tells us that the compiler version too old, not what compiler
+ version is required.
+
+ Fix this by rewriting using required:
+ ...
+ UNSUPPORTED: gdb.ada/finish-var-size.exp: require failed: \
+ expr [gcc_major_version] >= 12
+ ...
+
+ Tested on x86_64-linux.
+
+2023-02-07 GDB Administrator <gdbadmin@sourceware.org>
+
+ Automatic date update in version.in
+
+2023-02-06 Simon Marchi <simon.marchi@polymtl.ca>
+
+ gdb: adjust comment on target_desc_info::from_user_p
+ Remove the stale reference to INFO, which is now "this target
+ description info" now.
+
+ Change-Id: I35dbdb089048ed7cfffe730d3134ee391b176abf
+
+2023-02-06 Andrew Burgess <aburgess@redhat.com>
+
+ gdb/doc: extend the documentation for the 'handle' command
+ The documentation for the 'handle' command does not cover all of the
+ features of the command, and in one case, is just wrong.
+
+ The user can specify 'all' as signal name, the documentation implies
+ that this will change the behaviour of all signals, in reality, this
+ changes all signals except SIGINT and SIGTRAP (the signals used by
+ GDB). I've updated the docs to list this limitation.
+
+ The 'handle' command also allows the user to specify multiple signals
+ for a single command, e.g. 'handle SIGFPE SIGILL nostop pass print',
+ however the documentation doesn't describe this, so I've updated the
+ docs to describe this feature.
+
+2023-02-06 Alan Modra <amodra@gmail.com>
+
+ ppc32 and "LOAD segment with RWX permissions"
+ When using a bss-plt we'll always trigger the RWX warning, which
+ disturbs gcc test results. On the other hand, there may be reason to
+ want the warning when gcc is configured with --enable-secureplt.
+ So turning off the warning entirely for powerpc might not be the best
+ solution. Instead, we'll turn off the warning whenever a bss-plt is
+ generated, unless the user explicitly asked for the warning.
+
+ bfd/
+ * elf32-ppc.c (ppc_elf_select_plt_layout): Set
+ no_warn_rwx_segments on generating a bss plt, unless explicity
+ enabled by the user. Also show the bss-plt warning when
+ --warn-rwx-segments is given without --bss-plt.
+ include/
+ * bfdlink.h (struct bfd_link_info): Add user_warn_rwx_segments.
+ ld/
+ * lexsup.c (parse_args): Set user_warn_rwx_segments.
+ * testsuite/ld-elf/elf.exp: Pass --secure-plt for powerpc to
+ the rwx tests.
+
+2023-02-06 Tom de Vries <tdevries@suse.de>
+
+ [gdb/testsuite] Fix gdb.threads/schedlock.exp on fast cpu
+ Occasionally, I run into:
+ ...
+ (gdb) PASS: gdb.threads/schedlock.exp: schedlock=on: cmd=continue: \
+ set scheduler-locking on
+ continue^M
+ Continuing.^M
+ PASS: gdb.threads/schedlock.exp: schedlock=on: cmd=continue: \
+ continue (with lock)
+ [Thread 0x7ffff746e700 (LWP 1339) exited]^M
+ No unwaited-for children left.^M
+ (gdb) Quit^M
+ (gdb) FAIL: gdb.threads/schedlock.exp: schedlock=on: cmd=continue: \
+ stop all threads (with lock) (timeout)
+ ...
+
+ What happens is that this loop which is supposed to run "just short of forever":
+ ...
+ /* Don't run forever. Run just short of it :) */
+ while (*myp > 0)
+ {
+ /* schedlock.exp: main loop. */
+ MAYBE_CALL_SOME_FUNCTION(); (*myp) ++;
+ }
+ ...
+ finishes after 0x7fffffff iterations (when a signed wrap occurs), which on my
+ system takes only about 1.5 seconds.
+
+ Fix this by:
+ - changing the pointed-at type of myp from signed to unsigned, which makes the
+ wrap defined behaviour (and which also make the loop run twice as long,
+ which is already enough to make it impossible for me to reproduce the FAIL.
+ But let's try to solve this more structurally).
+ - changing the pointed-at type of myp from int to long long, making the wrap
+ unlikely.
+ - making sure the loop runs forever, by setting the loop condition to 1.
+ - making sure the loop still contains different lines (as far as debug info is
+ concerned) by incrementing a volatile counter in the loop.
+ - making sure the program doesn't run forever in case of trouble, by adding an
+ "alarm (30)".
+
+ Tested on x86_64-linux.
+
+ PR testsuite/30074
+ Bug: https://sourceware.org/bugzilla/show_bug.cgi?id=30074
+
+2023-02-06 Andrew Burgess <aburgess@redhat.com>
+
+ gdb: error if 'thread' or 'task' keywords are overused
+ When creating a breakpoint or watchpoint, the 'thread' and 'task'
+ keywords can be used to create a thread or task specific breakpoint or
+ watchpoint.
+
+ Currently, a thread or task specific breakpoint can only apply for a
+ single thread or task, if multiple threads or tasks are specified when
+ creating the breakpoint (or watchpoint), then the last specified id
+ will be used.
+
+ The exception to the above is that when the 'thread' keyword is used
+ during the creation of a watchpoint, GDB will give an error if
+ 'thread' is given more than once.
+
+ In this commit I propose making this behaviour consistent, if the
+ 'thread' or 'task' keywords are used more than once when creating
+ either a breakpoint or watchpoint, then GDB will give an error.
+
+ I haven't updated the manual, we don't explicitly say that these
+ keywords can be repeated, and (to me), given the keyword takes a
+ single id, I don't think it makes much sense to repeat the keyword.
+ As such, I see this more as adding a missing error to GDB, rather than
+ making some big change. However, I have added an entry to the NEWS
+ file as I guess it is possible that some people might hit this new
+ error with an existing (I claim, badly written) GDB script.
+
+ I've added some new tests to check for the new error.
+
+ Just one test needed updating, gdb.linespec/keywords.exp, this test
+ did use the 'thread' keyword twice, and expected the breakpoint to be
+ created. Looking at what this test was for though, it was checking
+ the use of '-force-condition', and I don't think that being able to
+ repeat 'thread' was actually a critical part of this test.
+
+ As such, I've updated this test to expect the error when 'thread' is
+ repeated.
+
+2023-02-06 Alan Modra <amodra@gmail.com>
+
+ Resetting section vma after _bfd_dwarf2_find_nearest_line
+ There are failure paths in _bfd_dwarf2_slurp_debug_info that can
+ result in altered section vmas. Also, when setting ET_REL section
+ vmas it's not too difficult to handle cases where the original vma was
+ non-zero, so do that too.
+
+ This patch was really in response to an addr2line buffer overflow
+ processing a fuzzed mips relocatable object file. The file had a
+ number of .debug_info sections with relocations that included lo16 and
+ hi16 relocs, and in that order. At least one section VMA was
+ non-zero. This resulted in processing of DWARF info twice, once via
+ the call to _bfd_dwarf2_find_nearest_line in
+ _bfd_mips_elf_find_nearest_line, and because that failed leaving VMAs
+ altered, the second via the call in _bfd_elf_find_nearest_line. The
+ first call left entries on mips_hi16_list pointing at buffers
+ allocated during the first call, the second call processed the
+ mips_hi16_list after the buffers had been freed. (At least when
+ running with asan and under valgrind. Under gdb with a non-asan
+ addr2line the second call allocated exactly the same buffer and the
+ bug didn't show.) Now I don't really care too much what happens with
+ fuzzed files, but the logic in _bfd_dwarf2_find_nearest_line is meant
+ to result in only one read of .debug_info, not multiple reads of the
+ same info when there are errors. This patch fixes that problem.
+
+ * dwarf2.c (struct adjusted_section): Add orig_vma.
+ (unset_sections): Reset vma to it.
+ (place_sections): Handle non-zero vma too. Save orig_vma.
+ (_bfd_dwarf2_slurp_debug_info): Tidy. Correct outdated comment.
+ On error returns after calling place_sections, call
+ unset_sections.
+ (_bfd_dwarf2_find_nearest_line_with_alt): Simplify call to
+ unset_sections.
+
+2023-02-06 Romain Geissler <romain.geissler@amadeus.com>
+
+ [PR 30082] Pass $JANSSON_LIBS and $ZSTD_LIBS to ld-bootstrap/bootrap.exp
+
+2023-02-06 GDB Administrator <gdbadmin@sourceware.org>
+
+ Automatic date update in version.in
+
+2023-02-05 GDB Administrator <gdbadmin@sourceware.org>
+
+ Automatic date update in version.in
+
+2023-02-04 Andrew Burgess <aburgess@redhat.com>
+
+ gdb/testsuite: don't try to set non-stop mode on a running target
+ The test gdb.threads/thread-specific-bp.exp tries to set non-stop mode
+ on a running target, something which the manual makes clear is not
+ allowed.
+
+ This commit restructures the test a little, we now set the non-stop
+ mode as part of the GDBFLAGS, so the mode will be set before GDB
+ connects to the target. As a consequence I'm able to move the
+ with_test_prefix out of the check_thread_specific_breakpoint proc.
+ The check_thread_specific_breakpoint proc is now called within a loop.
+
+ After this commit the gdb.threads/thread-specific-bp.exp test still
+ has some failures, this is because of an issue GDB currently has
+ printing "Thread ... exited" messages. This problem should be
+ addressed by this patch:
+
+ https://sourceware.org/pipermail/gdb-patches/2022-December/194694.html
+
+ when it is merged.
+
+2023-02-04 Dimitar Dimitrov <dimitar@dinux.eu>
+
+ ld: pru: Add optional section alignments
+ The Texas Instruments SoCs with AARCH64 host processors have stricter
+ alignment requirements than ones with ARM32 host processors. It's not
+ only the requirement for resource_table to be aligned to 8. But also
+ any loadable segment size must be a multiple of 4 [1].
+
+ The current PRU default linker script may output a segment size not
+ aligned to 4, which would cause firmware load failure on AARCH64 hosts.
+
+ Fix this by using COMMONPAGESIZE and MAXPAGESIZE to signify respectively
+ the section memory size requirement and the resource table section's
+ start address alignment. This would avoid penalizing the ARM32 hosts,
+ for which the default values (1 and 1) are sufficient.
+
+ For AARCH64 hosts, the alignments would be overwritten from GCC spec
+ files using the linker command line, e.g.:
+ -z common-page-size=4 -z max-page-size=8
+
+ [1] https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/tree/drivers/remoteproc/pru_rproc.c?h=v6.1#n555
+
+ ld/ChangeLog:
+
+ * scripttempl/pru.sc (_data_end): Remove the alignment.
+ (.data): Align output section size to COMMONPAGESIZE.
+ (.resource_table): Ditto.
+
+2023-02-04 Dimitar Dimitrov <dimitar@dinux.eu>
+
+ ld: pru: Merge the bss input sections into data
+ The popular method to load PRU firmware is through the remoteproc Linux
+ kernel driver. In order to save a few bytes from the firmware, the PRU
+ CRT0 is spared from calling memset for the bss segment [1]. Instead the
+ host loader is supposed to zero out the bss segment. This is important
+ for PRU, which typically has only 8KB for instruction memory.
+
+ The legacy non-mainline PRU host driver relied on the default
+ behaviour of the kernel core remoteproc [2]. That default is to zero
+ out the loadable memory regions not backed by file storage (i.e. the
+ bss sections). This worked for the libgloss' CRT0.
+
+ But the PRU loader merged in mainline Linux explicitly changes the
+ default behaviour [3]. It no longer is zeroing out memory regions.
+ Hence the bss sections are not initialized - neither by CRT0, nor by the
+ host loader.
+
+ This patch fixes the issue by aligning the GNU LD default linker script
+ with the mainline Linux kernel expectation. Since the mainline kernel
+ driver is submitted by the PRU manufacturer itself (Text Instruments),
+ we can consider that as defining the ABI.
+
+ This change has been tested on Beaglebone AI-64 [4]. Static counter
+ variables in the firmware are now always starting from zero, as
+ expected. There was only one new toolchain test failure in orphan3.d,
+ due to reordering of the output sections. I believe this is a harmless
+ issue. I could not rewrite the PASS criteria to ignore the output
+ section ordering, so I have disabled that test case for PRU.
+
+ [1] https://sourceware.org/git/?p=newlib-cygwin.git;a=blob;f=libgloss/pru/crt0.S;h=b3f0d53a93acc372f461007553e7688ca77753c9;hb=HEAD#l40
+ [2] https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/tree/drivers/remoteproc/remoteproc_elf_loader.c?h=v6.1#n228
+ [3] https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/tree/drivers/remoteproc/pru_rproc.c?h=v6.1#n641
+ [4] https://beagleboard.org/ai-64
+
+ ld/ChangeLog:
+
+ * scripttempl/pru.sc (.data): Merge .bss input sections into the
+ .data output section.
+ * testsuite/ld-elf/orphan3.d: Disable for PRU.
+
+2023-02-04 GDB Administrator <gdbadmin@sourceware.org>
+
+ Automatic date update in version.in
+
+2023-02-03 Guillermo E. Martinez <guillermo.e.martinez@oracle.com>
+
+ bpf: fix error conversion from long unsigned int to unsigned int [-Werror=overflow]
+ Regenerating BPF target using the maintainer mode emits:
+ .../opcodes/bpf-opc.c:57:11: error: conversion from ‘long unsigned int’ to ‘unsigned int’ changes value from ‘18446744073709486335’ to ‘4294902015’ [-Werror=overflow]
+ 57 | 64, 64, 0xffffffffffff00ff, { { F (F_IMM32) }, { F (F_OFFSET16) }, { F (F_SRCLE) }, { F (F_OP_CODE) }, { F (F_DSTLE) }, { F (F_OP_SRC) }, { F (F_OP_CLASS) }, { 0 } }
+
+ The use of a narrow size to handle the mask CGEN in instruction format
+ is causing this error. Additionally eBPF `call' instructions
+ constructed by expressions using symbols (BPF_PSEUDO_CALL) emits
+ annotations in `src' field of the instruction, used to identify BPF
+ target endianness.
+
+ cpu/
+ * bpf.cpu (define-call-insn): Remove `src' field from
+ instruction mask.
+
+ include/
+ *opcode/cge.h (CGEN_IFMT): Adjust mask bit width.
+
+ opcodes/
+ * bpf-opc.c: Regenerate.
+
+2023-02-03 Simon Marchi <simon.marchi@polymtl.ca>
+
+ gdb: make target_desc_info_from_user_p a method of target_desc_info
+ Move the implementation over to target_desc_info. Remove the
+ target_desc_info forward declaration in target-descriptions.h, it's no
+ longer needed.
+
+ Change-Id: Ic95060341685afe0b73af591ca6efe32f5e7e892
+
+2023-02-03 Simon Marchi <simon.marchi@polymtl.ca>
+
+ gdb: remove copy_inferior_target_desc_info
+ This function is now trivial, we can just copy inferior::tdesc_info
+ where needed.
+
+ Change-Id: I25185e2cd4ba1ef24a822d9e0eebec6e611d54d6
+
+2023-02-03 Simon Marchi <simon.marchi@polymtl.ca>
+
+ gdb: remove get_tdesc_info
+ Remove this function, since it's now a trivial access to
+ inferior::tdesc_info.
+
+ Change-Id: I3e88a8214034f1a4163420b434be11f51eef462c
+
+2023-02-03 Simon Marchi <simon.marchi@polymtl.ca>
+
+ gdb: change inferior::tdesc_info to non-pointer
+ I initially made this field a unique pointer, to have automatic memory
+ management. But I then thought that the field didn't really need to be
+ allocated separately from struct inferior. So make it a regular
+ non-pointer field of inferior.
+
+ Remove target_desc_info_free, as it's no longer needed.
+
+ Change-Id: Ica2b97071226f31c40e86222a2f6922454df1229
+
+2023-02-03 Simon Marchi <simon.marchi@polymtl.ca>
+
+ gdb: move target_desc_info to inferior.h
+ In preparation for the following patch, where struct inferior needs to
+ "see" struct target_desc_info, move target_desc_info to the header file.
+
+ I initially moved the structure to target-descriptions.h, and later made
+ inferior.h include target-descriptions.h. This worked, but it then
+ occured to me that target_desc_info is really an inferior property that
+ involves a target description, so I think it makes sense to have it in
+ inferior.h.
+
+ Change-Id: I3e81d04faafcad431e294357389f3d4c601ee83d
+
+2023-02-03 Simon Marchi <simon.marchi@polymtl.ca>
+
+ gdb: use assignment to initialize variable in tdesc_parse_xml
+ Since allocate_target_description returns a target_desc_up, use
+ assignment to initialize the description variable.
+
+ Change-Id: Iab3311642c09b95648984f305936f4a4cde09440
+
+2023-02-03 Jan Beulich <jbeulich@suse.com>
+
+ x86: drop LOCK from XCHG when optimizing
+ Like with segment overrides on LEA, optimize away such a redundant
+ instruction prefix.
+
+ x86-64: respect {nooptimize} when building VEX prefix
+ Swapping operands for commutative insns occurs outside of
+ optimize_encoding() and hence needs explicit checking for a request to
+ avoid any optimizations.
+
+ x86: respect {nooptimize} for LEA
+ Dropping a meaningless segment prefix occurs outside of
+ optimize_encoding() and hence needs explicit checking for a request to
+ avoid any optimizations.
+
+ x86-64: respect MOVABS when choosing alternative encodings
+ The alternative encoding is valid for MOV, but there's no such thing for
+ MOVABS.
+
+ RISC-V: don't disassemble unrecognized insns as .byte
+ Insn width granularity being 16 bits, producing byte granular output
+ isn't very useful. With there being a way to specific otherwise
+ unknown insns to the assembler, use that same representation (to be
+ precise: its <length>,<encoding> flavor) for disassembly.
+
+2023-02-03 Alan Modra <amodra@gmail.com>
+
+ Add ECOFF Symbolic Header sanity checks
+ Anti-fuzzer measures. The checks don't ensure the various elements in
+ the header are distinct, but that isn't important as far as making
+ sure we don't overrun the buffer containing all the elements. Also,
+ we now don't care about offsets where the corresponding count is zero.
+
+ * ecoff.c (_bfd_ecoff_slurp_symbolic_info): Sanity check offsets
+ in debug->symbolic_header.
+
+2023-02-03 GDB Administrator <gdbadmin@sourceware.org>
+
+ Automatic date update in version.in
+
+2023-02-02 Simon Marchi <simon.marchi@polymtl.ca>
+
+ gdb: initial support for ROCm platform (AMDGPU) debugging
+ This patch adds the foundation for GDB to be able to debug programs
+ offloaded to AMD GPUs using the AMD ROCm platform [1]. The latest
+ public release of the ROCm release at the time of writing is 5.4, so
+ this is what this patch targets.
+
+ The ROCm platform allows host programs to schedule bits of code for
+ execution on GPUs or similar accelerators. The programs running on GPUs
+ are typically referred to as `kernels` (not related to operating system
+ kernels).
+
+ Programs offloaded with the AMD ROCm platform can be written in the HIP
+ language [2], OpenCL and OpenMP, but we're going to focus on HIP here.
+ The HIP language consists of a C++ Runtime API and kernel language.
+ Here's an example of a very simple HIP program:
+
+ #include "hip/hip_runtime.h"
+ #include <cassert>
+
+ __global__ void
+ do_an_addition (int a, int b, int *out)
+ {
+ *out = a + b;
+ }
+
+ int
+ main ()
+ {
+ int *result_ptr, result;
+
+ /* Allocate memory for the device to write the result to. */
+ hipError_t error = hipMalloc (&result_ptr, sizeof (int));
+ assert (error == hipSuccess);
+
+ /* Run `do_an_addition` on one workgroup containing one work item. */
+ do_an_addition<<<dim3(1), dim3(1), 0, 0>>> (1, 2, result_ptr);
+
+ /* Copy result from device to host. Note that this acts as a synchronization
+ point, waiting for the kernel dispatch to complete. */
+ error = hipMemcpyDtoH (&result, result_ptr, sizeof (int));
+ assert (error == hipSuccess);
+
+ printf ("result is %d\n", result);
+ assert (result == 3);
+
+ return 0;
+ }
+
+ This program can be compiled with:
+
+ $ hipcc simple.cpp -g -O0 -o simple
+
+ ... where `hipcc` is the HIP compiler, shipped with ROCm releases. This
+ generates an ELF binary for the host architecture, containing another
+ ELF binary with the device code. The ELF for the device can be
+ inspected with:
+
+ $ roc-obj-ls simple
+ 1 host-x86_64-unknown-linux file://simple#offset=8192&size=0
+ 1 hipv4-amdgcn-amd-amdhsa--gfx906 file://simple#offset=8192&size=34216
+ $ roc-obj-extract 'file://simple#offset=8192&size=34216'
+ $ file simple-offset8192-size34216.co
+ simple-offset8192-size34216.co: ELF 64-bit LSB shared object, *unknown arch 0xe0* version 1, dynamically linked, with debug_info, not stripped
+ ^
+ amcgcn architecture that my `file` doesn't know about ----´
+
+ Running the program gives the very unimpressive result:
+
+ $ ./simple
+ result is 3
+
+ While running, this host program has copied the device program into the
+ GPU's memory and spawned an execution thread on it. The goal of this
+ GDB port is to let the user debug host threads and these GPU threads
+ simultaneously. Here's a sample session using a GDB with this patch
+ applied:
+
+ $ ./gdb -q -nx --data-directory=data-directory ./simple
+ Reading symbols from ./simple...
+ (gdb) break do_an_addition
+ Function "do_an_addition" not defined.
+ Make breakpoint pending on future shared library load? (y or [n]) y
+ Breakpoint 1 (do_an_addition) pending.
+ (gdb) r
+ Starting program: /home/smarchi/build/binutils-gdb-amdgpu/gdb/simple
+ [Thread debugging using libthread_db enabled]
+ Using host libthread_db library "/lib/x86_64-linux-gnu/libthread_db.so.1".
+ [New Thread 0x7ffff5db7640 (LWP 1082911)]
+ [New Thread 0x7ffef53ff640 (LWP 1082913)]
+ [Thread 0x7ffef53ff640 (LWP 1082913) exited]
+ [New Thread 0x7ffdecb53640 (LWP 1083185)]
+ [New Thread 0x7ffff54bf640 (LWP 1083186)]
+ [Thread 0x7ffdecb53640 (LWP 1083185) exited]
+ [Switching to AMDGPU Wave 2:2:1:1 (0,0,0)/0]
+
+ Thread 6 hit Breakpoint 1, do_an_addition (a=<error reading variable: DWARF-2 expression error: `DW_OP_regx' operations must be used either alone or in conjunction with DW_OP_piece or DW_OP_bit_piece.>,
+ b=<error reading variable: DWARF-2 expression error: `DW_OP_regx' operations must be used either alone or in conjunction with DW_OP_piece or DW_OP_bit_piece.>,
+ out=<error reading variable: DWARF-2 expression error: `DW_OP_regx' operations must be used either alone or in conjunction with DW_OP_piece or DW_OP_bit_piece.>) at simple.cpp:24
+ 24 *out = a + b;
+ (gdb) info inferiors
+ Num Description Connection Executable
+ * 1 process 1082907 1 (native) /home/smarchi/build/binutils-gdb-amdgpu/gdb/simple
+ (gdb) info threads
+ Id Target Id Frame
+ 1 Thread 0x7ffff5dc9240 (LWP 1082907) "simple" 0x00007ffff5e9410b in ?? () from /opt/rocm-5.4.0/lib/libhsa-runtime64.so.1
+ 2 Thread 0x7ffff5db7640 (LWP 1082911) "simple" __GI___ioctl (fd=3, request=3222817548) at ../sysdeps/unix/sysv/linux/ioctl.c:36
+ 5 Thread 0x7ffff54bf640 (LWP 1083186) "simple" __GI___ioctl (fd=3, request=3222817548) at ../sysdeps/unix/sysv/linux/ioctl.c:36
+ * 6 AMDGPU Wave 2:2:1:1 (0,0,0)/0 do_an_addition (
+ a=<error reading variable: DWARF-2 expression error: `DW_OP_regx' operations must be used either alone or in conjunction with DW_OP_piece or DW_OP_bit_piece.>,
+ b=<error reading variable: DWARF-2 expression error: `DW_OP_regx' operations must be used either alone or in conjunction with DW_OP_piece or DW_OP_bit_piece.>,
+ out=<error reading variable: DWARF-2 expression error: `DW_OP_regx' operations must be used either alone or in conjunction with DW_OP_piece or DW_OP_bit_piece.>) at simple.cpp:24
+ (gdb) bt
+ Python Exception <class 'gdb.error'>: Unhandled dwarf expression opcode 0xe1
+ #0 do_an_addition (a=<error reading variable: DWARF-2 expression error: `DW_OP_regx' operations must be used either alone or in conjunction with DW_OP_piece or DW_OP_bit_piece.>,
+ b=<error reading variable: DWARF-2 expression error: `DW_OP_regx' operations must be used either alone or in conjunction with DW_OP_piece or DW_OP_bit_piece.>,
+ out=<error reading variable: DWARF-2 expression error: `DW_OP_regx' operations must be used either alone or in conjunction with DW_OP_piece or DW_OP_bit_piece.>) at simple.cpp:24
+ (gdb) continue
+ Continuing.
+ result is 3
+ warning: Temporarily disabling breakpoints for unloaded shared library "file:///home/smarchi/build/binutils-gdb-amdgpu/gdb/simple#offset=8192&size=67208"
+ [Thread 0x7ffff54bf640 (LWP 1083186) exited]
+ [Thread 0x7ffff5db7640 (LWP 1082911) exited]
+ [Inferior 1 (process 1082907) exited normally]
+
+ One thing to notice is the host and GPU threads appearing under
+ the same inferior. This is a design goal for us, as programmers tend to
+ think of the threads running on the GPU as part of the same program as
+ the host threads, so showing them in the same inferior in GDB seems
+ natural. Also, the host and GPU threads share a global memory space,
+ which fits the inferior model.
+
+ Another thing to notice is the error messages when trying to read
+ variables or printing a backtrace. This is expected for the moment,
+ since the AMD GPU compiler produces some DWARF that uses some
+ non-standard extensions:
+
+ https://llvm.org/docs/AMDGPUDwarfExtensionsForHeterogeneousDebugging.html
+
+ There were already some patches posted by Zoran Zaric earlier to make
+ GDB support these extensions:
+
+ https://inbox.sourceware.org/gdb-patches/20211105113849.118800-1-zoran.zaric@amd.com/
+
+ We think it's better to get the basic support for AMD GPU in first,
+ which will then give a better justification for GDB to support these
+ extensions.
+
+ GPU threads are named `AMDGPU Wave`: a wave is essentially a hardware
+ thread using the SIMT (single-instruction, multiple-threads) [3]
+ execution model.
+
+ GDB uses the amd-dbgapi library [4], included in the ROCm platform, for
+ a few things related to AMD GPU threads debugging. Different components
+ talk to the library, as show on the following diagram:
+
+ +---------------------------+ +-------------+ +------------------+
+ | GDB | amd-dbgapi target | <-> | AMD | | Linux kernel |
+ | +-------------------+ | Debugger | +--------+ |
+ | | amdgcn gdbarch | <-> | API | <=> | AMDGPU | |
+ | +-------------------+ | | | driver | |
+ | | solib-rocm | <-> | (dbgapi.so) | +--------+---------+
+ +---------------------------+ +-------------+
+
+ - The amd-dbgapi target is a target_ops implementation used to control
+ execution of GPU threads. While the debugging of host threads works
+ by using the ptrace / wait Linux kernel interface (as usual), control
+ of GPU threads is done through a special interface (dubbed `kfd`)
+ exposed by the `amdgpu` Linux kernel module. GDB doesn't interact
+ directly with `kfd`, but instead goes through the amd-dbgapi library
+ (AMD Debugger API on the diagram).
+
+ Since it provides execution control, the amd-dbgapi target should
+ normally be a process_stratum_target, not just a target_ops. More
+ on that later.
+
+ - The amdgcn gdbarch (describing the hardware architecture of the GPU
+ execution units) offloads some requests to the amd-dbgapi library,
+ so that knowledge about the various architectures doesn't need to be
+ duplicated and baked in GDB. This is for example for things like
+ the list of registers.
+
+ - The solib-rocm component is an solib provider that fetches the list of
+ code objects loaded on the device from the amd-dbgapi library, and
+ makes GDB read their symbols. This is very similar to other solib
+ providers that handle shared libraries, except that here the shared
+ libraries are the pieces of code loaded on the device.
+
+ Given that Linux host threads are managed by the linux-nat target, and
+ the GPU threads are managed by the amd-dbgapi target, having all threads
+ appear in the same inferior requires the two targets to be in that
+ inferior's target stack. However, there can only be one
+ process_stratum_target in a given target stack, since there can be only
+ one target per slot. To achieve it, we therefore resort the hack^W
+ solution of placing the amd-dbgapi target in the arch_stratum slot of
+ the target stack, on top of the linux-nat target. Doing so allows the
+ amd-dbgapi target to intercept target calls and handle them if they
+ concern GPU threads, and offload to beneath otherwise. See
+ amd_dbgapi_target::fetch_registers for a simple example:
+
+ void
+ amd_dbgapi_target::fetch_registers (struct regcache *regcache, int regno)
+ {
+ if (!ptid_is_gpu (regcache->ptid ()))
+ {
+ beneath ()->fetch_registers (regcache, regno);
+ return;
+ }
+
+ // handle it
+ }
+
+ ptids of GPU threads are crafted with the following pattern:
+
+ (pid, 1, wave id)
+
+ Where pid is the inferior's pid and "wave id" is the wave handle handed
+ to us by the amd-dbgapi library (in practice, a monotonically
+ incrementing integer). The idea is that on Linux systems, the
+ combination (pid != 1, lwp == 1) is not possible. lwp == 1 would always
+ belong to the init process, which would also have pid == 1 (and it's
+ improbable for the init process to offload work to the GPU and much less
+ for the user to debug it). We can therefore differentiate GPU and
+ non-GPU ptids this way. See ptid_is_gpu for more details.
+
+ Note that we believe that this scheme could break down in the context of
+ containers, where the initial process executed in a container has pid 1
+ (in its own pid namespace). For instance, if you were to execute a ROCm
+ program in a container, then spawn a GDB in that container and attach to
+ the process, it will likely not work. This is a known limitation. A
+ workaround for this is to have a dummy process (like a shell) fork and
+ execute the program of interest.
+
+ The amd-dbgapi target watches native inferiors, and "attaches" to them
+ using amd_dbgapi_process_attach, which gives it a notifier fd that is
+ registered in the event loop (see enable_amd_dbgapi). Note that this
+ isn't the same "attach" as in PTRACE_ATTACH, but being ptrace-attached
+ is a precondition for amd_dbgapi_process_attach to work. When the
+ debugged process enables the ROCm runtime, the amd-dbgapi target gets
+ notified through that fd, and pushes itself on the target stack of the
+ inferior. The amd-dbgapi target is then able to intercept target_ops
+ calls. If the debugged process disables the ROCm runtime, the
+ amd-dbgapi target unpushes itself from the target stack.
+
+ This way, the amd-dbgapi target's footprint stays minimal when debugging
+ a process that doesn't use the AMD ROCm platform, it does not intercept
+ target calls.
+
+ The amd-dbgapi library is found using pkg-config. Since enabling
+ support for the amdgpu architecture (amdgpu-tdep.c) depends on the
+ amd-dbgapi library being present, we have the following logic for
+ the interaction with --target and --enable-targets:
+
+ - if the user explicitly asks for amdgcn support with
+ --target=amdgcn-*-* or --enable-targets=amdgcn-*-*, we probe for
+ the amd-dbgapi and fail if not found
+
+ - if the user uses --enable-targets=all, we probe for amd-dbgapi,
+ enable amdgcn support if found, disable amdgcn support if not found
+
+ - if the user uses --enable-targets=all and --with-amd-dbgapi=yes,
+ we probe for amd-dbgapi, enable amdgcn if found and fail if not found
+
+ - if the user uses --enable-targets=all and --with-amd-dbgapi=no,
+ we do not probe for amd-dbgapi, disable amdgcn support
+
+ - otherwise, amd-dbgapi is not probed for and support for amdgcn is not
+ enabled
+
+ Finally, a simple test is included. It only tests hitting a breakpoint
+ in device code and resuming execution, pretty much like the example
+ shown above.
+
+ [1] https://docs.amd.com/category/ROCm_v5.4
+ [2] https://docs.amd.com/bundle/HIP-Programming-Guide-v5.4
+ [3] https://en.wikipedia.org/wiki/Single_instruction,_multiple_threads
+ [4] https://docs.amd.com/bundle/ROCDebugger-API-Guide-v5.4
+
+ Change-Id: I591edca98b8927b1e49e4b0abe4e304765fed9ee
+ Co-Authored-By: Zoran Zaric <zoran.zaric@amd.com>
+ Co-Authored-By: Laurent Morichetti <laurent.morichetti@amd.com>
+ Co-Authored-By: Tony Tye <Tony.Tye@amd.com>
+ Co-Authored-By: Lancelot SIX <lancelot.six@amd.com>
+ Co-Authored-By: Pedro Alves <pedro@palves.net>
+
+2023-02-02 Simon Marchi <simon.marchi@efficios.com>
+
+ gdb: make gdb_printing_disassembler::stream public
+ In the ROCm port, we need to access the underlying stream of a
+ gdb_printing_disassembler, so make it public. The reason we need to
+ access it is to know whether it supports style escape code. We then
+ pass that information to a temporary string_file we use while
+ symbolizing addresses.
+
+ Change-Id: Ib95755a4a45b8f6478787993e9f904df60dd8dc1
+ Approved-By: Andrew Burgess <aburgess@redhat.com>
+
+2023-02-02 Simon Marchi <simon.marchi@efficios.com>
+
+ gdb/solib-svr4: don't disable probes interface if probe not found
+ In ROCm-GDB, we install an solib provider for the GPU code objects on
+ top of the svr4 provider for the host, in order to add solibs
+ representing the GPU code objects to the solib list containing the host
+ process' shared libraries. We override the target_so_ops::handle_event
+ function pointer with our own, in which we call svr4_so_ops.handle_event
+ (which contains svr4_handle_solib_event) manually. When the host
+ (un)loads a library, the ROCm part of handle_event is a no-op. When the
+ GPU (un)loads a code object, we want the host side (svr4) to be a no-op.
+
+ The problem is that when handle_event is called because of a GPU event,
+ svr4_handle_solib_event gets called while not stopped at an svr4
+ probe. It then assumes this means there's a problem with the probes
+ interface and disables it through the following sequence of events:
+
+ - solib_event_probe_at return nullptr
+ - svr4_handle_solib_event returns early
+ - the make_scope_exit callback calls disable_probes_interface
+
+ We could fix that by making the ROCm handle_event callback check if an
+ svr4 probe is that the stop address, and only call
+ svr4_so_ops.handle_event if so. However, it doesn't feel right to
+ include some svr4 implementation detail in the ROCm event handler.
+
+ Instead, this patch changes svr4_handle_solib_event to not assume it is
+ an error if called while not at an svr4 probe location, and therefore
+ not disable the probes interface. That just means moving the
+ make_scope_exit call below where we lookup the probe by pc.
+
+ Change-Id: Ie8ddf5beffa2e92b8ebfdd016454546252519244
+ Co-Authored-By: Lancelot SIX <lancelot.six@amd.com>
+
+2023-02-02 Simon Marchi <simon.marchi@efficios.com>
+
+ gdb: add gdbarch_up
+ Add a gdbarch_up unique pointer type, that calls gdbarch_free on
+ deletion. This is used in the ROCm support patch at the end of this
+ series.
+
+ Change-Id: I4b808892d35d69a590ce83180f41afd91705b2c8
+ Approved-By: Andrew Burgess <aburgess@redhat.com>
+
+2023-02-02 Simon Marchi <simon.marchi@efficios.com>
+
+ gdb: add inferior_pre_detach observable
+ Add an observable notified in target_detach just before calling the
+ detach method on the inferior's target stack. This allows observer to
+ do some work on the inferior while it's still ptrace-attached, in the
+ case of a native Linux inferior. Specifically, the amd-dbgapi target
+ will need it in order to call amd_dbgapi_process_detach before the
+ process gets ptrace-detached.
+
+ Change-Id: I28b6065e251012a4c2db8a600fe13ba31671e3c9
+ Approved-By: Andrew Burgess <aburgess@redhat.com>
+
+2023-02-02 Simon Marchi <simon.marchi@efficios.com>
+
+ gdbsupport: add type definitions for pid, lwp and tid
+ A following patch will want to declare variables of the same type as
+ some ptid_t components. To make that easy (and avoid harcoding those
+ types everywhere), define some type definitions in the ptid_t struct for
+ each of them. Use them throughout ptid.h.
+
+ I initially used pid_t, lwp_t and tid_t, but there is the risk of some
+ system defining the pid_t type using a macro instead of a typedef, which
+ would break things. So, use the _type suffix instead.
+
+ Change-Id: I820b0bea9dafcb4914f1c9ba4bb96b5c666c8dec
+ Approved-By: Andrew Burgess <aburgess@redhat.com>
+
+2023-02-02 Pedro Alves <pedro@palves.net>
+
+ gdb: make install_breakpoint return a non-owning reference
+ A following patch will want to install a breakpoint and then keep a
+ non-owning reference to it. Make install_breakpoint return a non-owning
+ reference, to make that easy.
+
+ Co-Authored-By: Simon Marchi <simon.marchi@efficios.com>
+ Change-Id: I2e8106a784021ff276ce251e24708cbdccc2d479
+ Approved-By: Andrew Burgess <aburgess@redhat.com>
+
+2023-02-02 Lancelot SIX <lancelot.six@amd.com>
+
+ gdb: add supports_arch_info callback to gdbarch_register
+ In the ROCm GDB port, there are some amdgcn architectures known by BFD
+ that we don't actually support in GDB. We don't want
+ gdbarch_printable_names to return these architectures.
+
+ gdbarch_printable_names is used for a few things:
+
+ - completion of the "set architecture" command
+ - the gdb.architecture_names function in Python
+ - foreach-arch selftests
+
+ Add an optional callback to gdbarch_register that is a predicate
+ indicating whether the gdbarch supports the given bfd_arch_info. by
+ default, it is nullptr, meaning that the gdbarch accepts all "mach"s for
+ that architecture known by BFD.
+
+ Change-Id: I712f94351b0b34ed1f42e5cf7fc7ba051315d860
+ Co-Authored-By: Simon Marchi <simon.marchi@efficios.com>
+ Approved-By: Andrew Burgess <aburgess@redhat.com>
+
+2023-02-02 Tom de Vries <tdevries@suse.de>
+
+ [gas] Update .loc syntax comment in dwarf2dbg.c
+ I noticed that a comment in gas/dwarf2dbg.c describing .loc syntax was missing
+ the "view VALUE" option.
+
+ Fix this by adding the missing option.
+
+2023-02-02 Enze Li <enze.li@hotmail.com>
+
+ gdb: remove gdb_indent.sh
+ GDB has been converted to a C++ program for many years[1], and the
+ gdb_indent.sh will not be used any more. Therefore, remove the script as
+ obvious.
+
+ [1] https://sourceware.org/gdb/wiki/cxx-conversion
+
+ Approved-By: Simon Marchi <simark@simark.ca>
+
+2023-02-02 Indu Bhagat <indu.bhagat@oracle.com>
+
+ ld/doc: use "stack trace" instead of "unwind" for SFrame
+ SFrame format is meant for generating stack traces only.
+
+ ld/
+ * ld.texi: Replace the use of "unwind" with "stack trace".
+
+2023-02-02 Indu Bhagat <indu.bhagat@oracle.com>
+
+ bfd: use "stack trace" instead of "unwind" for SFrame
+ SFrame format is meant for generating stack traces only.
+
+ bfd/
+ * elf-bfd.h: Replace the use of "unwind" with "stack trace".
+ * elf-sframe.c: Likewise.
+ * elf64-x86-64.c: Likewise.
+ * elfxx-x86.c: Likewise.
+
+ include/
+ * elf/common.h: Likewise.
+
+2023-02-02 Indu Bhagat <indu.bhagat@oracle.com>
+
+ gas: use "stack trace" instead of "unwind" for SFrame
+ SFrame format is meant for generating stack traces only.
+
+ gas/
+ * as.c: Replace the use of "unwind" with "stack trace".
+ * config/tc-aarch64.c: Likewise.
+ * config/tc-aarch64.h: Likewise.
+ * config/tc-i386.c: Likewise.
+ * config/tc-i386.h: Likewise.
+ * gen-sframe.c: Likewise.
+ * gen-sframe.h: Likewise.
+ * testsuite/gas/cfi-sframe/cfi-sframe-aarch64-2.s: Likewise.
+ * testsuite/gas/cfi-sframe/cfi-sframe-common-8.s: Likewise.
+ * testsuite/gas/cfi-sframe/common-empty-2.s: Likewise.
+ * testsuite/gas/cfi-sframe/common-empty-3.s: Likewise.
+
+2023-02-02 Indu Bhagat <indu.bhagat@oracle.com>
+
+ sframe: use "stack trace" instead of "unwind" for SFrame
+ SFrame format is meant for generating stack traces only.
+
+ include/
+ * sframe.h: Fix comments in the header file.
+
+2023-02-02 Indu Bhagat <indu.bhagat@oracle.com>
+
+ libsframe/doc: use "stack trace" instead of "unwind" for SFrame
+ SFrame format is meant for generating stack traces only.
+
+ libsframe/
+ * doc/sframe-spec.texi: Use "stack trace" instead of "unwind".
+
+2023-02-02 Alan Modra <amodra@gmail.com>
+
+ ld-elf/merge test update
+ The merge test fais on numerous targets because they don't support the
+ necessary pc-relative relocs. This patch removes that part of the
+ merge test, and makes references to the merged strings from .data
+ rather than .text to better support targets that relax text by
+ default.
+
+2023-02-02 GDB Administrator <gdbadmin@sourceware.org>
+
+ Automatic date update in version.in
+
+2023-02-01 Alan Modra <amodra@gmail.com>
+
+ obj-elf.h BYTES_IN_WORD
+ Don't define this. It is defined just before elf-bfd.h is included,
+ but doesn't have any relevance there. Instead is for aout64.h where
+ the default is 4 anyway.
+
+2023-02-01 Alan Modra <amodra@gmail.com>
+
+ gas obj_end
+ Provide a way for config/obj-* to clean up at end of assembly, and do
+ so for ELF.
+
+ * obj.h (struct format_ops): Add "end".
+ * config/obj-aout.c (aout_format_ops): Init new field.
+ * config/obj-coff.c (coff_format_ops): Likewise.
+ * config/obj-ecoff.c (ecoff_format_ops): Likewise.
+ * config/obj-elf.c (elf_format_ops): Likewise.
+ (elf_begin): Move later in file. Clear some more variables.
+ (comment_section): Make file scope.
+ (free_section_idx): Rewrite.
+ (elf_adjust_symtab): Expand str_htab_create call and use
+ free_section_idx as delete function.
+ (elf_frob_file_after_relocs): Don't clean up groups.indexes here.
+ (elf_end): New function.
+ * config/obj-elf.h (obj_end): Define.
+ * config/obj-multi.h (obj_end): Define.
+ * output-file.c (output_file_close): Call obj_end.
+
+2023-02-01 Thiago Jung Bauermann <thiago.bauermann@linaro.org>
+
+ gdbserver: Add PID parameter to linux_get_auxv and linux_get_hwcap
+ This patch doesn't change gdbserver behaviour, but after later changes are
+ made it avoids a null pointer dereference when HWCAP needs to be obtained
+ for a specific process while current_thread is nullptr.
+
+ Fixing linux_read_auxv, linux_get_hwcap and linux_get_hwcap2 to take a PID
+ parameter seems more correct than setting current_thread in one particular
+ code path.
+
+ Changes are propagated to allow passing the new parameter through the call
+ chain.
+
+ Approved-By: Simon Marchi <simon.marchi@efficios.com>
+
+2023-02-01 Thiago Jung Bauermann <thiago.bauermann@linaro.org>
+
+ gdbserver: Add assert in find_register_by_number
+ It helped me during development, catching bugs closer to when they actually
+ happened.
+
+ Also remove the equivalent gdb_assert in regcache_raw_read_unsigned, since
+ it's checking the same condition a few frames above.
+
+ Suggested-By: Simon Marchi <simon.marchi@efficios.com>
+ Approved-By: Simon Marchi <simon.marchi@efficios.com>
+
+2023-02-01 Andrew Burgess <aburgess@redhat.com>
+
+ gdb/testsuite: fix fetch_src_and_symbols.exp with native-gdbserver board
+ I noticed that the gdb.debuginfod/fetch_src_and_symbols.exp script
+ doesn't work with the native-gdbserver board, I see this error:
+
+ ERROR: tcl error sourcing /tmp/build/gdb/testsuite/../../../src/gdb/testsuite/gdb.debuginfod/fetch_src_and_symbols.exp.
+ ERROR: gdbserver does not support run without extended-remote
+ while executing
+ "error "gdbserver does not support $command without extended-remote""
+ (procedure "gdb_test_multiple" line 51)
+ invoked from within
+
+ This was introduced with this commit:
+
+ commit 7dd38e31d67c2548b52bea313ab18e40824c05da
+ Date: Fri Jan 6 18:45:27 2023 -0500
+
+ gdb/linespec.c: Fix missing source file during breakpoint re-set
+
+ The problem is that the above commit introduces a direct use of the
+ "run" command, which doesn't work with 'target remote' targets, as
+ exercised by the native-gdbserver board.
+
+ To avoid this, in this commit I switch to using runto_main. However,
+ calling runto_main will, by default, delete all the currently set
+ breakpoints. As the point of the above commit was to check that a
+ breakpoint set before stating an inferior would be correctly re-set,
+ we need to avoid this breakpoint deleting behaviour.
+
+ To do this I make use of with_override, and override the
+ delete_breakpoints proc with a dummy proc which does nothing.
+
+ By reverting the GDB changes in commit 7dd38e31d67c I have confirmed
+ that even after my changes in this commit, the test still fails. But
+ with the fixes in commit 7dd38e31d67c, this test now passed using the
+ unix, native-gdbserver, and native-extended-gdbserver boards.
+
+2023-02-01 Alexandra Hájková <ahajkova@redhat.com>
+
+ gdb: defer warnings when loading separate debug files
+ Currently, when GDB loads debug information from a separate debug
+ file, there are a couple of warnings that could be produced if things
+ go wrong.
+
+ In find_separate_debug_file_by_buildid (build-id.c) GDB can give a
+ warning if the separate debug file doesn't include any actual debug
+ information, and in separate_debug_file_exists (symfile.c) we can warn
+ if the CRC checksum in the separate debug file doesn't match the
+ checksum in the original executable.
+
+ The problem here is that, when looking up debug information, GDB will
+ try several different approaches, lookup by build-id, lookup by
+ debug-link, and then a lookup from debuginfod. GDB can potentially
+ give a warning from an earlier attempt, and then succeed with a later
+ attempt. In the cases I have run into this is primarily a warning
+ about some out of date debug information on my machine, but then GDB
+ finds the correct information using debuginfod. This can be confusing
+ to a user, they will see warnings from GDB when really everything is
+ working just fine.
+
+ For example:
+
+ warning: the debug information found in "/usr/lib/debug//lib64/ld-2.32.so.debug" \
+ does not match "/lib64/ld-linux-x86-64.so.2" (CRC mismatch).
+
+ This diagnostic was printed on Fedora 33 even when the correct
+ debuginfo was downloaded.
+
+ In this patch I propose that we defer any warnings related to looking
+ up debug information from a separate debug file. If any of the
+ approaches are successful then GDB will not print any of the warnings.
+ As far as the user is concerned, everything "just worked". Only if
+ GDB completely fails to find any suitable debug information will the
+ warnings be printed.
+
+ The crc_mismatch test compiles two executables: crc_mismatch and
+ crc_mismatch-2 and then strips them of debuginfo creating separate
+ debug files. The test then replaces crc_mismatch-2.debug with
+ crc_mismatch.debug to trigger "CRC mismatch" warning. A local
+ debuginfod server is setup to supply the correct debug file, now when
+ GDB looks up the debug info no warning is given.
+
+ The build-id-no-debug-warning.exp is similar to the previous test. It
+ triggers the "separate debug info file has no debug info" warning by
+ replacing the build-id based .debug file with the stripped binary and
+ then loading it to GDB. It then also sets up local debuginfod server
+ with the correct debug file to download to make sure no warnings are
+ emitted.
+
+2023-02-01 Nick Clifton <nickc@redhat.com>
+
+ Fix compilation of the assembler with sanitization enabled.
+ * dwarf2dbg.c (emit_inc_line_addr): Use unsigned constants when checking addr_delta.
+
+2023-02-01 Alan Modra <amodra@gmail.com>
+
+ Recursion in as_info_where
+ This function has a gas_assert, ie. possible call to as_abort, which
+ calls as_report_context, which calls as_info_where.
+
+ * messages.c (as_info_where): Don't gas_assert.
+
+2023-02-01 Simon Marchi <simon.marchi@efficios.com>
+
+ gdb/dwarf: rename cooked_index_vector to cooked_index
+ See previous patch's commit message for rationale.
+
+ Change-Id: I6b8cdc045dffccc1c01ed690ff258af09f6ff076
+ Approved-By: Tom Tromey <tom@tromey.com>
+
+2023-02-01 Simon Marchi <simon.marchi@efficios.com>
+
+ gdb/dwarf: rename cooked_index to cooked_index_shard
+ I propose to rename cooked_index_vector and cooked_index such that the
+ "main" object, that is the entry point to the index, is called
+ cooked_index. The fact that the cooked index is implemented as a vector
+ of smaller indexes is an implementation detail.
+
+ This patch renames cooked_index to cooked_index_shard. The following
+ patch renames cooked_index_vector to cooked_index.
+
+ Change-Id: Id650f97dcb23c48f8409fa0974cd093ca0b75177
+ Approved-By: Tom Tromey <tom@tromey.com>
+
+2023-02-01 Tom de Vries <tdevries@suse.de>
+
+ [gas] Emit v2 .debug_line for -gdwarf-2
+ Currently, when using -gdwarf-2, gas emits a v3 .debug_line contribution.
+
+ Fix this by emitting a v2 .debug_line contribution instead.
+
+ gas/ChangeLog:
+
+ 2023-01-31 Tom de Vries <tdevries@suse.de>
+
+ PR 23941
+ * dwarf2dbg.c (DWARF2_LINE_VERSION): Set to 2 for -gdwarf-2.
+ (DWARF2_LINE_OPCODE_BASE): Handle DWARF2_LINE_VERSION == 2.
+ (dwarf2_directive_loc): Bump dwarf_level when encountering
+ v3 .loc options.
+ (out_debug_line): Don't output v3 standard opcodes for v2.
+ * testsuite/gas/i386/debug1.d: Update.
+ * testsuite/gas/i386/dwarf2-line-1.d: Update.
+ * testsuite/gas/i386/dwarf2-line-4.d: Update.
+
+2023-02-01 GDB Administrator <gdbadmin@sourceware.org>
+
+ Automatic date update in version.in
+
+2023-01-31 Simon Marchi <simon.marchi@efficios.com>
+
+ gdb: add nullptr check to cooked_index_functions::dump
+ Since commit 7d82b08e9e0a ("gdb/dwarf: dump cooked index contents in
+ cooked_index_functions::dump"), we see:
+
+ maint print objfiles /home/smarchi/build/binutils-gdb/gdb/testsuite/outputs/gdb.dwarf2/dw2-error/dw2-error^M
+ ^M
+ Object file /home/smarchi/build/binutils-gdb/gdb/testsuite/outputs/gdb.dwarf2/dw2-error/dw2-error: Objfile at 0x614000005040, bfd at 0x6120000e08c0, 15 minsyms^M
+ ^M
+ Cooked index in use:^M
+ ^M
+ /home/smarchi/src/binutils-gdb/gdb/../gdbsupport/gdb-checked-static-cast.h:58: internal-error: checked_static_cast: Assertion `result != nullptr' failed.^M
+ A problem internal to GDB has been detected,^M
+ further debugging may prove unreliable.^M
+ ----- Backtrace -----^M
+ FAIL: gdb.dwarf2/dw2-error.exp: maint print objfiles /home/smarchi/build/binutils-gdb/gdb/testsuite/outputs/gdb.dwarf2/dw2-error/dw2-error (GDB internal error)
+
+ The problem is that when cooked_index_functions fails to build an index,
+ per_objfile->index_table is nullptr. Therefore, add a nullptr check,
+ like other methods of cooked_index_functions already do.
+
+ Print the "Cooked index in use" message after the nullptr check, such
+ that if the cooked index failed to build, that message is not printed.
+
+ Change-Id: Id67aef592e76c41b1e3bde9838a4e36cef873253
+
+2023-01-31 Simon Marchi <simon.marchi@efficios.com>
+
+ gdbsupport: allow passing nullptr to checked_static_cast
+ Both static_cast and dynamic_cast handle nullptr (they return nullptr),
+ so I think checked_static_cast should too. This will allow doing a null
+ check after a checked_static_cast:
+
+ cooked_index_vector *table
+ = (gdb::checked_static_cast<cooked_index_vector *>
+ (per_bfd->index_table.get ()));
+ if (table != nullptr)
+ return;
+
+ Change-Id: If5c3134e63696f8e417c87b5f3901240c9f7ea97
+
+2023-01-31 Simon Marchi <simon.marchi@efficios.com>
+
+ gdb/testsuite: adjust ensure_gdb_index to cooked_index_functions::dump changes
+ Following 7d82b08e9e0a ("gdb/dwarf: dump cooked index contents in
+ cooked_index_functions::dump"), I see some failures like:
+
+ (gdb) mt print objfiles with-mf^M
+ ^M
+ Object file /home/smarchi/build/binutils-gdb/gdb/testsuite/outputs/gdb.base/with-mf/with-mf: Objfile at 0x614000005040, bfd at 0x6120000e08c0, 18 minsyms ^M
+ ^M
+ Cooked index in use:^M
+ ^M
+ ...
+ (gdb) FAIL: gdb.base/with-mf.exp: check if index present
+
+ This is because the format of the "Cooked index in use" line changed
+ slightly. Adjust ensure_gdb_index to expect the trailing colon.
+
+ Change-Id: If0a87575c02d8a0bc0d4b8ead540c234c62760f8
+
+2023-01-31 Simon Marchi <simon.marchi@efficios.com>
+
+ gdb/testsuite: fix xfail in gdb.ada/ptype_tagged_param.exp
+ I see:
+
+ ERROR: wrong # args: should be "xfail message"
+ while executing
+ "xfail "no debug info" $gdb_test_name"
+ ("uplevel" body line 3)
+ invoked from within
+ "uplevel {
+ if {!$has_runtime_debug_info} {
+ xfail "no debug info" $gdb_test_name
+ } else {
+ fail $gdb_test_name
+ }
+ }"
+
+ This is because the xfail takes only one argument, fix that.
+
+ Change-Id: I2e304d4fd3aa61067c04b5dac2be2ed34dab3190
+
+2023-01-31 Nick Clifton <nickc@redhat.com>
+
+ Updated Swedish translation for the binutils sub-directory
+
+2023-01-31 Alan Modra <amodra@gmail.com>
+
+ Re: Another fix for EFI generation with LTO enabled
+ Revert 1c66b8a03989 and instead fix the broken list pointer.
+
+ PR 29998
+ * pe-dll.c (build_filler_bfd): Revert last change.
+ * ldlang.c (lang_process): When rescanning archives for lto,
+ fix file_chain.tail pointer if the insert point happens to be
+ at the end of the list.
+
+2023-01-31 Andrew Burgess <aburgess@redhat.com>
+
+ gas/ppc: Additional tests for DFP instructions
+ I noticed that some of the Power6 DFP instructions were not covered by
+ the assembler tests. I've added a new test file which I believe
+ covers all the DFP Power6 instructions.
+
+ The existing gas/testsuite/gas/ppc/power6.d test is called:
+
+ POWER6 tests (includes DFP and Altivec)
+
+ And does cover some of the DFP instructions. But, given the number of
+ additional instructions I'm adding I opted to add a whole new test
+ file. I've left the original power6.d unchanged, so there is now some
+ overlap, but I don't think that should hurt much.
+
+2023-01-31 Jan Beulich <jbeulich@suse.com>
+
+ RISC-V: make C-extension JAL available again for (32-bit) assembly
+ Along with the normal JAL alias, the C-extension one should have been
+ moved as well by 839189bc932e ("RISC-V: re-arrange opcode table for
+ consistent alias handling"), for the assembler to actually be able to
+ use it where/when possible.
+
+ Since neither this nor any other compressed branch insn was being tested
+ so far, take the opportunity and introduce a new testcase covering those.
+
+2023-01-31 Alan Modra <amodra@gmail.com>
+
+ Silence ubsan warning about 1<<31
+ * merge.c (hash_blob): Write 1u << 31.
+
+2023-01-31 Alan Modra <amodra@gmail.com>
+
+ PR 30060, ASAN error in bfd_cache_close
+ After bfd_close nothing should access bfd memory. Now that bfd_close
+ always tidies up even after an error, attempting to tidy the cached
+ bfd list by calling bfd_cache_close is wrong and not needed.
+
+ PR 30060
+ * ar.c (remove_output): Don't call bfd_cache_close.
+ (output_bfd): Delete.
+ * arsup.c (ar_end): Call bfd_close_all_done, not bfd_cache_close.
+
+2023-01-31 Alan Modra <amodra@gmail.com>
+
+ testsuite XPASSes
+ This adjusts the testsuite to get rid of a number of XPASSes that have
+ appeared. Someone might like to look into a better patch for the s390
+ change.
+
+ aarch64-pe XPASS: weak symbols
+ arm-nacl XPASS: rgn-over8
+ mcore-pe XPASS: ld-scripts/provide-8
+ mips64-linux-gnuabi64 XPASS: vers4
+ mips64-linux-gnuabi64 XPASS: vers4b
+ mips-linux-gnu XPASS: vers4
+ mips-linux-gnu XPASS: vers4b
+ s390-linux-gnu XPASS: undefined line
+ sh4-linux-gnu XPASS: --gc-sections with __start_SECTIONNAME
+ sh-coff XPASS: objcopy object (simple copy)
+ sh-coff XPASS: objcopy executable (pr25662)
+
+ binutils/
+ * testsuite/binutils-all/objcopy.exp: Don't xfail "simple
+ copy" and "pr25662" on sh-*-coff. Remove all non-ELF xfails
+ on "ELF unknown section type" test.
+ ld/
+ * testsuite/ld-elfvers/vers.exp (vers4, vers4b): Don't xfail
+ all mips, just xfail mips irix.
+ * testsuite/ld-gc/pr19161.d: Don't xfail sh.
+ * testsuite/ld-scripts/rgn-over8-ok.d: Don't xfail nacl.
+ * testsuite/ld-scripts/weak.exp: Don't xfail aarch64-pe.
+ * testsuite/ld-undefined/undefined.exp: Conditionally xfail
+ "undefined line" depending on gcc version for s390.
+
+2023-01-31 GDB Administrator <gdbadmin@sourceware.org>
+
+ Automatic date update in version.in
+
+2023-01-30 Tom Tromey <tom@tromey.com>
+
+ Remove value_next declaration
+ value_next is declared but not defined. It's long obsolete. This
+ patch removes the stray declaration.
+
+2023-01-30 Simon Marchi <simon.marchi@efficios.com>
+
+ gdb: fix dwarf2/cooked-index.c compilation on 32-bit systems
+ The i386 builder shows:
+
+ ../../binutils-gdb/gdb/dwarf2/cooked-index.c: In member function ‘void cooked_index_vector::dump(gdbarch*) const’:
+ ../../binutils-gdb/gdb/dwarf2/cooked-index.c:492:40: error: format ‘%lx’ expects argument of type ‘long unsigned int’, but argument 2 has type ‘std::__underlying_type_impl<sect_offset, true>::type’ {aka ‘long long unsigned int’} [-Werror=format=]
+ 492 | gdb_printf (" DIE offset: 0x%lx\n",
+ | ~~^
+ | |
+ | long unsigned int
+ | %llx
+ 493 | to_underlying (entry->die_offset));
+ | ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+ | |
+ | std::__underlying_type_impl<sect_offset, true>::type {aka long long unsigned int}
+
+ The die_offset's underlying type is uint64, so use PRIx64 in the format
+ string.
+
+ Change-Id: Ibdde4c624ed1bb50eced9a514a4e37aec70a1323
+
+2023-01-30 Mark Wielaard <mark@klomp.org>
+
+ gdb: Replace memcpy with std::copy to avoid some g++ warnings on sparc
+ For some reason g++ 12.2.1 on sparc produces spurious warnings for
+ stringop-overread and restrict in fbsd-tdep.c for a memcpy call.
+ Use std::copy to avoid the warnings:
+
+ In function ‘void* memcpy(void*, const void*, size_t)’,
+ inlined from ‘gdb::optional<std::vector<unsigned char, gdb::default_init_allocator<unsigned char, std::allocator<unsigned char> > > > fbsd_make_note_desc(target_object, uint32_t)’ at ../../binutils-gdb/gdb/fbsd-tdep.c:666:10:
+ /usr/include/bits/string_fortified.h:29:33: error: ‘void* __builtin_memcpy(void*, const void*, long unsigned int)’ specified bound 18446744073709551612 exceeds maximum object size 9223372036854775807 [-Werror=stringop-overflow=]
+
+ In function ‘void* memcpy(void*, const void*, size_t)’,
+ inlined from ‘gdb::optional<std::vector<unsigned char, gdb::default_init_allocator<unsigned char, std::allocator<unsigned char> > > > fbsd_make_note_desc(target_object, uint32_t)’ at ../../binutils-gdb/gdb/fbsd-tdep.c:673:10:
+ /usr/include/bits/string_fortified.h:29:33: error: ‘void* __builtin_memcpy(void*, const void*, long unsigned int)’ accessing 18446744073709551612 bytes at offsets 0 and 0 overlaps 9223372036854775801 bytes at offset -9223372036854775805 [-Werror=restrict]
+
+ gdb/ChangeLog:
+
+ * fbsd-tdep.c (fbsd_make_note_desc): Use std::copy instead
+ of memcpy.
+
+2023-01-30 Simon Marchi <simon.marchi@polymtl.ca>
+
+ gdb/dwarf: dump cooked index contents in cooked_index_functions::dump
+ As I am investigating a crash I see with the cooked index, I thought it
+ would be useful to have a way to dump the index contents. For those not
+ too familiar with it (that includes me), it can help get a feel of what
+ it contains and how it is structured.
+
+ The cooked_index_functions::dump function is called as part of the
+ "maintenance print objfiles" command. I tried to make the output
+ well structured and indented to help readability, as this prints a lot
+ of text.
+
+ The dump function first dumps all cooked index entries, like this:
+
+ [25] ((cooked_index_entry *) 0x621000121220)
+ name: __ioinit
+ canonical: __ioinit
+ DWARF tag: DW_TAG_variable
+ flags: 0x2 [IS_STATIC]
+ DIE offset: 0x21a4
+ parent: ((cooked_index_entry *) 0x6210000f9610) [std]
+
+ Then the information about the main symbol:
+
+ main: ((cooked_index_entry *) 0x621000123b40) [main]
+
+ And finally the address map contents:
+
+ [1] ((addrmap *) 0x6210000f7910)
+
+ [0x0] ((dwarf2_per_cu_data *) 0)
+ [0x118a] ((dwarf2_per_cu_data *) 0x60c000007f00)
+ [0x1cc7] ((dwarf2_per_cu_data *) 0)
+ [0x1cc8] ((dwarf2_per_cu_data *) 0x60c000007f00)
+ [0x1cdf] ((dwarf2_per_cu_data *) 0)
+ [0x1ce0] ((dwarf2_per_cu_data *) 0x60c000007f00)
+
+ The display of address maps above could probably be improved, to show it
+ more as ranges, but I think this is a reasonable start.
+
+ Note that this patch depends on Pedro Alves' patch "enum_flags
+ to_string" [1]. If my patch is to be merged before Pedro's series, I
+ will cherry-pick this patch from his series and merge it before mine.
+
+ [1] https://inbox.sourceware.org/gdb-patches/20221212203101.1034916-8-pedro@palves.net/
+
+ Change-Id: Ida13e479fd4c8d21102ddd732241778bc3b6904a
+
+2023-01-30 Pedro Alves <pedro@palves.net>
+
+ enum_flags to_string
+ This commit introduces shared infrastructure that can be used to
+ implement enum_flags -> to_string functions. With this, if we want to
+ support converting a given enum_flags specialization to string, we
+ just need to implement a function that provides the enumerator->string
+ mapping, like so:
+
+ enum some_flag
+ {
+ SOME_FLAG1 = 1 << 0,
+ SOME_FLAG2 = 1 << 1,
+ SOME_FLAG3 = 1 << 2,
+ };
+
+ DEF_ENUM_FLAGS_TYPE (some_flag, some_flags);
+
+ static std::string
+ to_string (some_flags flags)
+ {
+ static constexpr some_flags::string_mapping mapping[] = {
+ MAP_ENUM_FLAG (SOME_FLAG1),
+ MAP_ENUM_FLAG (SOME_FLAG2),
+ MAP_ENUM_FLAG (SOME_FLAG3),
+ };
+ return flags.to_string (mapping);
+ }
+
+ .. and then to_string(SOME_FLAG2 | SOME_FLAG3) produces a string like
+ "0x6 [SOME_FLAG2 SOME_FLAG3]".
+
+ If we happen to forget to update the mapping array when we introduce a
+ new enumerator, then the string representation will pretty-print the
+ flags it knows about, and then the leftover flags in hex (one single
+ number). For example, if we had missed mapping SOME_FLAG2 above, we'd
+ end up with:
+
+ to_string(SOME_FLAG2 | SOME_FLAG3) => "0x6 [SOME_FLAG2 0x4]");
+
+ Other than in the unit tests included, no actual usage of the
+ functionality is added in this commit.
+
+ Approved-By: Simon Marchi <simon.marchi@efficios.com>
+ Change-Id: I835de43c33d13bc0c95132f42c3f97318b875779
+
+2023-01-30 Tom Tromey <tromey@adacore.com>
+
+ Fix comparator bug in cooked index
+ Simon pointed out that the cooked index template-matching patch
+ introduced a failure in libstdc++ debug mode. In particular, the new
+ code violates the assumption of std::lower_bound and std::upper_bound
+ that the range is sorted with respect to the comparison.
+
+ When I first debugged this, I thought the problem was unfixable as-is
+ and that a second layer of filtering would have to be done. However,
+ on irc, Simon pointed out that it could perhaps be solved if the
+ comparison function were assured that one operand always came from the
+ index, with the other always being the search string.
+
+ This patch implements this idea.
+
+ First, a new mode is introduced: a sorting mode for
+ cooked_index_entry::compare. In this mode, strings are compared
+ case-insensitively, but we're careful to always sort '<' before any
+ other printable character. This way, two names like "func" and
+ "func<param>" will be sorted next to each other -- i.e., "func1" will
+ not be seen between them. This is important when searching.
+
+ Second, the compare function is changed to work in a strcmp-like way.
+ This makes it easier to test and (IMO) understand.
+
+ Third, the compare function is modified so that in non-sorting modes,
+ the index entry is always the first argument. This allows consistency
+ in compares.
+
+ I regression tested this in libstdc++ debug mode on x86-64 Fedora 36.
+ It fixes the crash that Simon saw.
+
+ This is v2. I believe it addresses the review comments, except for
+ the 'enum class' change, as I mentioned in email on the list.
+
+ Approved-By: Simon Marchi <simon.marchi@efficios.com>
+
+2023-01-30 Tom Tromey <tom@tromey.com>
+
+ Clean up lnp_state_machine constructor
+ This changes the lnp_state_machine constructor to initialize members
+ directly; and changes lnp_state_machine itself to initialize members
+ inline when possible.
+
+ Reviewed-By: Lancelot Six <lancelot.six@amd.com>
+
+2023-01-30 Tom Tromey <tromey@adacore.com>
+
+ Make addrmap const-correct in cooked index
+ After the cooked index is created, the addrmaps should be const.
+
+ Change-Id: I8234520ab346ced40a8dd6e478ba21fc438c2ba2
+
+2023-01-30 Simon Marchi <simon.marchi@polymtl.ca>
+
+ gdb: provide const-correct versions of addrmap::find and addrmap::foreach
+ Users of addrmap::find and addrmap::foreach that have a const addrmap
+ should ideally receive const pointers to objects, to indicate they
+ should not be modified. However, users that have a non-const addrmap
+ should still receive a non-const pointer.
+
+ To achieve this, without adding more virtual methods, make the existing
+ find and foreach virtual methods private and prefix them with "do_".
+ Add small non-const and const wrappers for find and foreach.
+
+ Obviously, the const can be cast away, but if using static_cast
+ instead of C-style casts, then the compiler won't let you cast
+ the const away. I changed all the callers of addrmap::find and
+ addrmap::foreach I could find to make them use static_cast.
+
+ Change-Id: Ia8e69d022564f80d961413658fe6068edc71a094
+
+2023-01-30 Tom Tromey <tromey@adacore.com>
+
+ Use xfail in ptype_tagged_param.exp
+ Pedro pointed out that ptype_tagged_param.exp used a kfail, but an
+ xfail would be more appropriate as the problem appears to be in gcc,
+ not gdb.
+
+2023-01-30 Christina Schimpe <christina.schimpe@intel.com>
+
+ gdb: Remove workaround for the vCont packet
+ The workaround for the vCont packet is no longer required due to the
+ former commit "gdb: Make global feature array a per-remote target array".
+ The vCont packet is now checked once when the connection is started and
+ the supported vCont actions are set to the target's remote state
+ attribute.
+
+2023-01-30 Christina Schimpe <christina.schimpe@intel.com>
+
+ gdb: Add per-remote target variables for memory read and write config
+ This patch adds per-remote target variables for the configuration of
+ memory read- and write packet size. It is a further change to commit
+ "gdb: Make global feature array a per-remote target array" to apply the
+ fixme notes described in commit 5b6d1e4 "Multi-target support".
+
+ The former global variables for that configuration are still available
+ to allow the command line configuration for all future remote
+ connections. Similar to the command line configuration of the per-
+ remote target feature array, the commands
+
+ - set remotewritesize (deprecated)
+ - set remote memory-read-packet-size
+ - set remote memory-write-packet-size
+
+ will configure the current target (if available). If no target is
+ available, the default configuration for future remote connections is
+ adapted. The show command will display the current remote target's
+ packet size configuration. If no remote target is selected, the default
+ configuration for future connections will be shown.
+
+ It is required to adapt the test gdb.base/remote.exp which is failing
+ for --target_board=native-extended-gdbserver. With that board GDB
+ connects to gdbserver at gdb start time. Due to this patch two loggings
+ "The target may not be able to.." are shown if the command 'set remote
+ memory-write-packet-size fixed' is executed while a target is connected
+ for the current inferior. To fix this, the clean_restart command is
+ moved to a later time point of the test. It is sufficient to be
+ connected to the server when "runto_main" is executed. Now the
+ connection time is similar to a testrun with
+ --target_board=native-gdbserver.
+
+ To allow the user to distinguish between the packet-size configuration
+ for future remote connections and for the currently selected target, the
+ commands' loggings are adapted.
+
+2023-01-30 Christina Schimpe <christina.schimpe@intel.com>
+
+ gdb: Make global feature array a per-remote target array
+ This patch applies the appropriate FIXME notes described in commit 5b6d1e4
+ "Multi-target support".
+
+ "You'll notice that remote.c includes some FIXME notes. These refer to
+ the fact that the global arrays that hold data for the remote packets
+ supported are still globals. For example, if we connect to two
+ different servers/stubs, then each might support different remote
+ protocol features. They might even be different architectures, like
+ e.g., one ARM baremetal stub, and a x86 gdbserver, to debug a
+ host/controller scenario as a single program. That isn't going to
+ work correctly today, because of said globals. I'm leaving fixing
+ that for another pass, since it does not appear to be trivial, and I'd
+ rather land the base work first. It's already useful to be able to
+ debug multiple instances of the same server (e.g., a distributed
+ cluster, where you have full control over the servers installed), so I
+ think as is it's already reasonable incremental progress."
+
+ Using this patch it is possible to configure per-remote targets'
+ feature packets.
+
+ Given the following setup for two gdbservers:
+
+ ~~~~
+ gdbserver --multi :1234
+ gdbserver --disable-packet=vCont --multi :2345
+ ~~~~
+
+ Before this patch configuring of range-stepping was not possible for one
+ of two connected remote targets with different support for the vCont
+ packet. As one of the targets supports vCont, it should be possible to
+ configure "set range-stepping". However, the output of GDB looks like:
+
+ (gdb) target extended-remote :1234
+ Remote debugging using :1234
+ (gdb) add-inferior -no-connection
+ [New inferior 2]
+ Added inferior 2
+ (gdb) inferior 2
+ [Switching to inferior 2 [<null>] (<noexec>)]
+ (gdb) target extended-remote :2345
+ Remote debugging using :2345
+ (gdb) set range-stepping on
+ warning: Range stepping is not supported by the current target
+ (gdb) inferior 1
+ [Switching to inferior 1 [<null>] (<noexec>)]
+ (gdb) set range-stepping on
+ warning: Range stepping is not supported by the current target
+ ~~~~
+
+ Two warnings are shown. The warning for inferior 1 should not appear
+ as it is connected to a target supporting the vCont package.
+
+ ~~~~
+ (gdb) target extended-remote :1234
+ Remote debugging using :1234
+ (gdb) add-inferior -no-connection
+ [New inferior 2]
+ Added inferior 2
+ (gdb) inferior 2
+ [Switching to inferior 2 [<null>] (<noexec>)]
+ (gdb) target extended-remote :2345
+ Remote debugging using :2345
+ (gdb) set range-stepping on
+ warning: Range stepping is not supported by the current target
+ (gdb) inferior 1
+ [Switching to inferior 1 [<null>] (<noexec>)]
+ (gdb) set range-stepping on
+ (gdb)
+ ~~~~
+
+ Now only one warning is shown for inferior 2, which is connected to
+ a target not supporting vCont.
+
+ The per-remote target feature array is realized by a new class
+ remote_features, which stores the per-remote target array and
+ provides functions to determine supported features of the target.
+ A remote_target object now has a new member of that class.
+
+ Each time a new remote_target object is initialized, a new per-remote
+ target array is constructed based on the global remote_protocol_packets
+ array. The global array is initialized in the function _initialize_remote
+ and can be configured using the command line. Before this patch the
+ command line configuration affected current targets and future remote
+ targets (due to the global feature array used by all remote
+ targets). This behavior is different and the configuration applies as
+ follows:
+
+ - If a target is connected, the command line configuration affects the
+ current connection. All other existing remote targets are not
+ affected.
+
+ - If not connected, the command line configuration affects future
+ connections.
+
+ The show command displays the current remote target's configuration. If no
+ remote target is selected the default configuration for future
+ connections is shown.
+
+ If we have for instance the following setup with inferior 2 being
+ selected:
+ ~~~~
+ (gdb) info inferiors
+ Num Description Connection Executable
+ 1 <null> 1 (extended-remote :1234)
+ * 2 <null> 2 (extended-remote :2345)
+ ~~~~
+
+ Before this patch, if we run 'set remote multiprocess-feature-packet', the
+ following configuration was set:
+ The feature array of all remote targets (in this setup the two connected
+ targets) and all future remote connections are affected.
+
+ After this patch, it will be configured as follows:
+ The feature array of target with port :2345 which is currently selected
+ will be configured. All other existing remote targets are not affected.
+ The show command 'show remote multiprocess-feature-packet' will display
+ the configuration of target with port :2345.
+
+ Due to this configuration change, it is required to adapt the test
+ "gdb/testsuite/gdb.multi/multi-target-info-inferiors.exp" to configure the
+ multiprocess-feature-packet before the connections are created.
+
+ To inform the gdb user about the new behaviour of the 'show remote
+ PACKET-NAME' commands and the new configuration impact for remote
+ targets using the 'set remote PACKET-NAME' commands the commands'
+ outputs are adapted. Due to this change it is required to adapt each
+ test using the set/show remote 'PACKET-NAME' commands.
+
+2023-01-30 GDB Administrator <gdbadmin@sourceware.org>
+
+ Automatic date update in version.in
+
+2023-01-29 GDB Administrator <gdbadmin@sourceware.org>
+
+ Automatic date update in version.in
+
+2023-01-28 GDB Administrator <gdbadmin@sourceware.org>
+
+ Automatic date update in version.in
+
+2023-01-27 Tom Tromey <tromey@adacore.com>
+
+ More const-correctness in cooked indexer
+ I noticed that iterating over the index yields non-const
+ cooked_index_entry objects. However, after finalization, they should
+ not be modified. This patch enforces this by adding const where
+ needed.
+
+ v2 makes the find, all_entries, and wait methods const as well.
+
+2023-01-27 Tom de Vries <tdevries@suse.de>
+
+ [gdb/testsuite] Simplify gdb.base/unwind-on-each-insn.exp.tcl
+ Recent commit 1d98e564c97 ("[gdb/testsuite] Add
+ gdb.base/unwind-on-each-insn-{amd64,i386}.exp") broke commit eb015bf86b6
+ ("[gdb/testsuite] Avoid using .eh_frame in gdb.base/unwind-on-each-insn.exp"),
+ in the sense that gdb.base/unwind-on-each-insn.exp no longer uses
+ -fno-asynchronous-unwind-tables, due to trying to concatenate two lists using:
+ ...
+ lappend srcfile2_flags $nodebug_flags
+ ...
+ which should instead be:
+ ...
+ lappend srcfile2_flags {*}$nodebug_flags
+ ...
+
+ Fix this by simplifying gdb.base/unwind-on-each-insn.exp.tcl, completely
+ leaving the responsibility to set srcfile_flags and srcfile2_flags to each
+ includer.
+
+ Tested on x86_64-linux.
+
+2023-01-27 Tom Tromey <tromey@adacore.com>
+
+ Invert test in gdb.ada/ptype_tagged_param.exp
+ Simon pointed out that the kfail check in
+ gdb.ada/ptype_tagged_param.exp is inverted. See:
+
+ https://sourceware.org/pipermail/gdb-patches/2023-January/196296.html
+
+ This patch fixes the problem.
+
+2023-01-27 Andrew Burgess <aburgess@redhat.com>
+
+ gdb/tui: more debug output
+ Add some additional debug output that I've found really useful while
+ working on the previous set of patches.
+
+ Unless tui debug is turned on, then there should be no user visible
+ changes with this commit.
+
+2023-01-27 Andrew Burgess <aburgess@redhat.com>
+
+ gdb/tui: avoid extra refresh_window on vertical scroll
+ While working on the previous couple of patches I noticed that when I
+ scroll the src and asm windows vertically, I get two refresh_window
+ calls.
+
+ The two calls can be traced back to
+ tui_source_window_base::update_source_window_as_is, in here we call
+ show_source_content, which calls refresh_window, and then
+ update_exec_info, which also calls refresh_window.
+
+ In this commit I propose making the refresh_window call in
+ update_exec_info optional. In update_source_window_as_is I'll then
+ call update_exec_info before calling show_source_content, and pass a
+ flag to update_exec_info to defer the refresh.
+
+ There are places where update_exec_info is used without any subsequent
+ refresh_window call (e.g. when a breakpoint is updated), so
+ update_exec_info does not to call refresh_window in some cases, which
+ is why I'm using a flag to control the refresh.
+
+ With this changes I'm now only seeing a single refresh_window call for
+ each vertical scroll.
+
+ There should be no user visible changes after this commit.
+
+2023-01-27 Andrew Burgess <aburgess@redhat.com>
+
+ gdb/tui: avoid extra refresh_window on horizontal scroll
+ While working on the previous patches I noticed that in some cases I
+ was seeing two calls to tui_source_window_base::refresh_window when
+ scrolling the window horizontally.
+
+ The two calls would trigger in for the tui-disasm-long-lines.exp test
+ when the pad needed to be refilled. The two called both come from
+ tui_source_window_base::show_source_content. The first call is nested
+ within check_and_display_highlight_if_needed, while the second call is
+ done directly at the end of show_source_content.
+
+ The check_and_display_highlight_if_needed is being used to draw the
+ window box to the window, this is needed here because
+ show_source_content is what gets called when the window needs
+ updating, e.g. after a resize. We could potentially do the boxing in
+ refresh_window, but then we'd be doing it each time we scroll, even
+ though the box doesn't need changing in this case.
+
+ However, we can move the check_and_display_highlight_if_needed to be
+ the last thing done in show_source_content, this means that we can
+ rely on the refresh_window call within it to be our single refresh
+ call.
+
+ There should be no user visible changes after this commit.
+
+2023-01-27 Andrew Burgess <aburgess@redhat.com>
+
+ gdb/tui: rewrite of tui_source_window_base to handle very long lines
+ This commit addresses an issue that is exposed by the test script
+ gdb.tui/tui-disasm-long-lines.exp, that is, tui_source_window_base
+ does not handle very long lines.
+
+ The problem can be traced back to the newpad call in
+ tui_source_window_base::show_source_content, this is where we allocate
+ a backing pad to hold the window content.
+
+ Unfortunately, there appears to be a limit to the size of pad that can
+ be allocated, and the gdb.tui/tui-disasm-long-lines.exp test goes
+ beyond this limit. As a consequence the newpad call fails and returns
+ nullptr.
+
+ It just so happens that the reset of the tui_source_window_base code
+ can handle the pad being nullptr (this happens anyway when the window
+ is first created, so we already depend on nullptr handling), so all
+ that happens is the source window displays no content.
+
+ ... well, sort of ... something weird does happen in the command
+ window, we seem to see a whole bunch of blank lines. I've not
+ bothered to track down exactly what's happening there, but it's some
+ consequence of GDB attempting to write content to a WINDOW* that is
+ nullptr.
+
+ Before explaining my solution, I'll outline how things currently work:
+
+ Consider we have the following window content to display:
+
+ aaaaaaaaaa
+ bbbbbbbbbbbbbbbbbbbb
+ ccccccccccccccc
+
+ the longest line here is 20 characters. If our display window is 10
+ characters wide, then we will create a pad that is 20 characters wide,
+ and then copy the lines of content into the pad:
+
+ .--------------------.
+ |aaaaaaaaaa |
+ |bbbbbbbbbbbbbbbbbbbb|
+ |ccccccccccccccc |
+ .--------------------.
+
+ Now we will copy a 10 character wide view into this pad to the
+ display, our display will then see:
+
+ .----------.
+ |aaaaaaaaaa|
+ |bbbbbbbbbb|
+ |cccccccccc|
+ .----------.
+
+ As the user scrolls left and right we adjust m_horizontal_offset and
+ use this to select which part of the pad is copied onto the display.
+
+ The benefit of this is that we only need to copy the content to the
+ pad once, which includes processing the ansi escape sequences, and
+ then the user can scroll left and right as much as they want
+ relatively cheaply.
+
+ The problem then, is that if the longest content line is very long,
+ then we try to allocate a very large pad, which can fail.
+
+ What I propose is that we allow both the pad and the display view to
+ scroll. Once we allow this, then it becomes possible to allocate a
+ pad that is smaller than the longest display line. We then copy part
+ of the content into the pad. As the user scrolls the view left and
+ right GDB will continue to copy content from the pad just as it does
+ right now. But, when the user scrolls to the edge of the pad, GDB
+ will copy a new block of content into the pad, and then update the
+ view as normal. This all works fine so long as the maximum pad size
+ is larger than the current window size - which seems a reasonable
+ restriction, if ncurses can't support a pad of a given size it seems
+ likely it will not support a display window of that size either.
+
+ If we return to our example above, but this time we assume that the
+ maximum pad size is 15 characters, then initially the pad would be
+ loaded like this:
+
+ .---------------.
+ |aaaaaaaaaa |
+ |bbbbbbbbbbbbbbb|
+ |ccccccccccccccc|
+ .---------------.
+
+ Notice that the last 5 characters from the 'b' line are no longer
+ included in the pad. There is still enough content though to fill the
+ 10 character wide display, just as we did before.
+
+ The pad contents remain unchanged until the user scrolls the display
+ right to this point:
+
+ .----------.
+ |aaaaa |
+ |bbbbbbbbbb|
+ |cccccccccc|
+ .----------.
+
+ Now, when the user scrolls right once more GDB spots that the user has
+ reached the end of the pad, and the pad contents are reloaded, like
+ this:
+
+ .---------------.
+ |aaaaa |
+ |bbbbbbbbbbbbbbb|
+ |cccccccccc |
+ .---------------.
+
+ The display can now be updated from the pad again just like normal.
+
+ With this change in place the gdb.tui/tui-disasm-long-lines.exp test
+ now correctly loads the assembler code, and we can scroll around as
+ expected.
+
+ Most of the changes are pretty mundane, just updating to match the
+ above. One interesting change though is the new member function
+ tui_source_window_base::puts_to_pad_with_skip. This replaces direct
+ calls to tui_puts when copying content to the pad.
+
+ The content strings contain ansi escape sequences. When these strings
+ are written to the pad these escape sequences are translated into
+ ncurses attribute setting calls.
+
+ Now however, we sometimes only write a partial string to the pad,
+ skipping some of the leading content. Imagine then that we have a
+ content line like this:
+
+ "\033[31mABCDEFGHIJKLM\033[0m"
+
+ Now the escape sequences in this content mean that the actual
+ content (the 'ABCDEFGHIJKLM') will have a red foreground color.
+
+ If we want to copy this to the pad, but skip the first 3 characters,
+ then what we expect is to have the pad contain 'DEFGHIJKLM', but this
+ text should still have a red foreground color.
+
+ It is this problem that puts_to_pad_with_skip solves. This function
+ skips some number of printable characters, but processes all the
+ escape sequences. This means that when we do start printing the
+ actual content the content will have the expected attributes.
+ /
+
+2023-01-27 Andrew Burgess <aburgess@redhat.com>
+
+ gdb/tui: make m_horizontal_offset private
+ I noticed that tui_source_window_base::m_horizontal_offset was
+ protected, but could be made private, so lets do that.
+
+ This makes more sense in the context of a later commit where I plan to
+ add another member variable that is similar to m_horizontal_offset.
+ The new member variable could also be private.
+
+ So I had to choose, place the new member variable next to
+ m_horizontal_offset making it protected, but grouping similar
+ variables together, or make m_horizontal_offset private, and then add
+ the new variable as private too.
+
+ I chose to make m_horizontal_offset private, which is this commit.
+
+ There should be no user visible changes after this commit.
+
+2023-01-27 Andrew Burgess <aburgess@redhat.com>
+
+ gdb/tui: disable tui mode when an assert triggers
+ When an assert triggers in tui mode the output is not great, the
+ internal backtrace that is generated is printed directly to the file
+ descriptor for gdb_stderr, and, as a result, does not currently format
+ itself correctly - the output uses only '\n' at the end of each line,
+ and so, when the terminal is in raw mode, the cursor does not return
+ to the start of each line after the '\n'.
+
+ This is mostly fixable, we could update bt-utils.c to use '\r\n'
+ instead of just '\n', and this would fix most of the problems. The
+ one we can't easily fix is if/when GDB is built to use execinfo
+ instead of libbacktrace, in this case we use backtrace_symbols_fd to
+ print the symbols, and this function only uses '\n' as the line
+ terminator. Fixing this would require switching to backtrace_symbols,
+ but that API uses malloc, which is something we're trying to
+ avoid (this code is called when GDB hits an error, so ideally we don't
+ want to rely on malloc).
+
+ However, the execinfo code is only used when libbacktrace is not
+ available (or the user specifically disables libbacktrace) so maybe we
+ can ignore that problem...
+
+ ... but there is another problem. When the backtrace is printed in
+ raw mode, it is possible that the backtrace fills the screen. With
+ the terminal in raw mode we don't have the ability to scroll back,
+ which means we loose some of the backtrace, which isn't ideal.
+
+ In this commit I propose that we should disable tui mode whenever we
+ handle a fatal signal, or when we hit the internal error code
+ path (e.g. when an assert triggers). With this done then we don't
+ need to update the bt-utils.c code, and the execinfo version of the
+ code (using backtrace_symbols_fd) works just fine. We also get the
+ ability to scroll back to view the error message and all of the
+ backtrace, assuming the users terminal supports scrolling back.
+
+ The only downside I see with this change is if the tui_disable call
+ itself causes an error for some reason, or, if we handle a single at a
+ time when it is not safe to call tui_disable, in these cases the extra
+ tui_disable call might cause GDB to loose the original error.
+
+ However, I think (just from personal experience) that the above two
+ issues are pretty rare and the benefits from this change far out
+ weighs the possible drawbacks.
+
+2023-01-27 Andrew Burgess <aburgess@redhat.com>
+
+ gdb/tui: improve errors from tui focus command
+ This commit improves (I think) the errors from the tui focus command.
+ There are a number of errors that can be triggered by the focus
+ command, they include:
+
+ (1) Window name "NAME" is ambiguous
+
+ (2) Unrecognized window name "NAME"
+
+ (3) Window "NAME" cannot be focused
+
+ Error (1) is triggered when the user gives a partial window name, and
+ the name matches multiple windows in the current layout.
+
+ It is worth noting that the ambiguity must be within the current
+ layout; if the partial name matches one window in the current layout,
+ and one or more windows not in the current layout, then this is not
+ ambiguous, and focus will shift to the matching window in the current
+ layout.
+
+ This error was not previous being tested, but in this commit I make
+ use of the Python API to trigger and test this error.
+
+ Error (3) is simple enough, and was already being tested. This is
+ triggered by something like 'focus status'. The named window needs to
+ be present in the current layout, and non-focusable in order to
+ trigger the error.
+
+ Error (2) is what I'd like to improve in this commit. This error
+ triggers if the name the user gives doesn't match any window in the
+ current layout. Even if GDB does know about the window, but the
+ window isn't in the current layout, then GDB will say it doesn't
+ recognize the window name.
+
+ In this commit I propose to to split this error into three different
+ errors. These will be:
+
+ (a) Unrecognized window name "NAME"
+
+ (b) No windows matching "NAME" in the current layout
+
+ (c) Window "NAME" is not in the current layout
+
+ Error (a) is the same as before, but will now only trigger if GDB
+ doesn't know about window NAME at all. If the window is known, but
+ not in the current layout then one of the other errors will trigger.
+
+ Error (b) will trigger if NAME is ambiguous for multiple windows that
+ are not in the current layout. If NAME identifies a single window in
+ the current layout then that window will continue to be selected, just
+ as it currently is. Only in the case where NAME doesn't identify a
+ window in the current layout do we then check all the other known
+ windows, if NAME matches multiple of these, then (b) is triggered.
+
+ Finally, error (c) is used when NAME uniquely identifies a single
+ window that is not in the current layout.
+
+ The hope with these new errors is that the user will have a better
+ understanding of what went wrong. Instead of GDB claiming to not know
+ about a window, the mention of the current layout will hint to the
+ user that they should first switch layouts.
+
+ There are tests included for all the new errors.
+
+2023-01-27 Andrew Burgess <aburgess@redhat.com>
+
+ gdb/testsuite: fix line feed scrolling in tuiterm.exp
+ In a following commit I managed to trigger the line feed scrolling
+ case in tuiterm.exp. This case is currently unhandled, and this
+ commit fills in this missing functionality.
+
+ The implementation is pretty simple, just scroll all the content up
+ one line at a time until the cursor is back on the screen (a single
+ line of scroll is all that should be needed).
+
+ This change is untested in this commit, but is required by the next
+ commit.
+
+2023-01-27 Nick Clifton <nickc@redhat.com>
+
+ Another fix for EFI generation with LTO enabled.
+ PR 29998 * pe-dll.c (build_filler_bfd): Initialise the next field of the filler input statement, so that it does not break the file chain.
+
+2023-01-27 Jan Beulich <jbeulich@suse.com>
+
+ x86: move reg_operands adjustment
+ Ideally we'd do away with this somewhat questionable adjustment (leaving
+ i.types[] untouched). That's non-trivial though as it looks, so only
+ - move the logic into process_operands(), putting it closer to related
+ logic and eliminating a conditional for operand-less insns,
+ - make it consistent (i.e. also affect %xmm0), eliminating an ugly
+ special case later in the function.
+
+ x86: drop dead SSE2AVX-related code
+ All (there are just two) SSE2AVX templates with %xmm0 as first operand
+ also specify VEX3SOURCES. Hence there's no need for an "else" to the
+ respective if(), and the if() itself can become an assertion.
+
+ x86: use ModR/M for FPU insns with operands
+ This is the correct way of expressing things; encoding the ModR/M byte
+ directly in base_opcode has always been bogus.
+
+ x86/Intel: improve special casing of certain insns
+ Now that we have identifiers for the mnemonic strings we can avoid
+ opcode based comparisons, for (in many cases) being more expensive and
+ (in a few cases) being a little fragile and not self-documenting.
+
+2023-01-27 Jan Beulich <jbeulich@suse.com>
+
+ opcodes: suppress internationalization on build helper tools
+ While one of the two actually having been instrumented (i386-gen.c) now
+ has that instrumentation dropped, there's still no point in honoring
+ such instrumentation in general (i.e. now for ia64-gen.c only), as that
+ only leads to a waste of resources.
+
+ With CFILES then being merely an alias of LIBOPCODES_CFILES, drop the
+ former variable altogether.
+
+2023-01-27 Jan Beulich <jbeulich@suse.com>
+
+ x86: remove internationalization from i386-gen.c
+ This is a build time helper utility, which doesn't require translation.
+
+2023-01-27 Alan Modra <amodra@gmail.com>
+
+ Call bfd_close_all_done in ld_cleanup
+ This is similar to "Call bfd_close_all_done in output_file_close",
+ but with some code tidying in the pe/pep write_build_id functions.
+ write_build_id is passed the output bfd as its parameter, so there is
+ no need to go looking for the output bfd via link_info (and doing so
+ will no longer work since I clear link_info.output_bfd before calling
+ bfd_close).
+
+ * emultempl/pe.em (write_build_id): Rename t to td. Formatting.
+ Don't access pe_data(link_info.output_bfd), use td instead.
+ (setup_build_id): Rename t to td. Formatting.
+ * emultempl/pep.em: As for pe.em.
+ * ldmain.c (ld_cleanup): Call bfd_close_all_done on linker bfds.
+ (main): Clear link_info.output_bfd when closing.
+
+2023-01-27 Alan Modra <amodra@gmail.com>
+
+ Perform cleanup in bfd_close after errors
+ It seems reasonable to continue after errors in bfd_close_all_done,
+ particularly since bfd_close_all_done is typically called on an output
+ file after we've hit some sort of error elsewhere. The iovec test is
+ necessary if bfd_close_all_done is to work on odd bfd's opened by
+ bfd_create.
+
+ * opncls.c (bfd_close): Call bfd_close_all_done after errors
+ from _bfd_write_contents.
+ (bfd_close_all_done): Call _bfd_delete_bfd after errors.
+ Don't call iovec->bclose when iovec is NULL.
+
+2023-01-27 Alan Modra <amodra@gmail.com>
+
+ Call bfd_close_all_done in output_file_close
+ bfd_cache_close_all is good for closing file descriptors, but doesn't
+ do the cleanup of bfd memory as in bfd_close_all_done.
+
+ PR 13056
+ * output-file.c (output_file_close): Call bfd_close_all_done,
+ not bfd_cache_close_all.
+
+2023-01-27 Alan Modra <amodra@gmail.com>
+
+ gas macro memory leaks
+ This tidies memory allocated for entries in macro_hash. Freeing the
+ macro name requires a little restructuring of the define_macro
+ interface due to the name being used in the error message, and exposed
+ the fact that the name and other fields were not initialised by the
+ iq2000 backend.
+
+ There is also a fix for
+ .macro .macro
+ .endm
+ .macro .macro
+ .endm
+ which prior to this patch reported
+ mac.s:1: Warning: attempt to redefine pseudo-op `.macro' ignored
+ mac.s:3: Error: Macro `.macro' was already defined
+ rather than reporting the attempt to redefine twice.
+
+ * macro.c (macro_del_f): New function.
+ (macro_init): Use it when creating macro_hash.
+ (free_macro): Free macro name too.
+ (define_macro): Return the macro_entry, remove idx, file, line and
+ namep params. Call as_where. Report errors here. Delete macro
+ from macro_hash on attempt to redefined pseudo-op.
+ (delete_macro): Don't call free_macro.
+ * macro.h (define_macro): Update prototype.
+ * read.c (s_macro): Adjust to suit.
+ * config/tc-iq2000.c (iq2000_add_macro): Init all fields of
+ macro_entry.
+
+2023-01-27 Mark Harmstone <mark@harmstone.com>
+
+ gas/testsuite: Add -gcodeview test for aarch64-w64-mingw32
+ This is a copy of the x86 gas -gcodeview test, with changes made for the
+ differing instruction lengths between x86 and aarch64.
+
+ gas: Add CodeView constant for aarch64
+ Adds the correct constant to the S_COMPILE3 CodeView record when
+ assembling aarch64-w64-mingw32 with the -gcodeview flag.
+
+2023-01-27 Tom Tromey <tom@tromey.com>
+
+ Use clean_restart in gdb.base
+ Change gdb.base to use clean_restart more consistently.
+
+ Use clean_restart in gdb.python
+ Change gdb.python to use clean_restart more consistently.
+
+ Use clean_restart in gdb.cp
+ Change gdb.cp to use clean_restart more consistently.
+
+ Use clean_restart in gdb.disasm
+ Change gdb.disasm to use clean_restart more consistently.
+
+ Use clean_restart in gdb.perf
+ Change gdb.perf to use clean_restart more consistently.
+
+ Use clean_restart in gdb.go
+ Change gdb.go to use clean_restart more consistently.
+
+ Use clean_restart in gdb.stabs
+ Change gdb.stabs to use clean_restart more consistently.
+
+ Use clean_restart in gdb.fortran
+ Change gdb.fortran to use clean_restart more consistently.
+
+ Use clean_restart in gdb.ada
+ Change gdb.ada to use clean_restart more consistently.
+
+ Use clean_restart in gdb.dwarf2
+ Change gdb.dwarf2 to use clean_restart more consistently.
+
+ Use clean_restart in gdb.reverse
+ Change gdb.reverse to use clean_restart more consistently.
+
+ Use clean_restart in gdb.arch
+ Change gdb.arch to use clean_restart more consistently.
+
+ Use clean_restart in gdb.guile
+ Change gdb.guile to use clean_restart more consistently.
+
+ Use clean_restart in gdb.threads
+ Change gdb.threads to use clean_restart more consistently.
+
+ Use clean_restart in gdb.objc
+ Change gdb.objc to use clean_restart more consistently.
+
+ Use clean_restart in gdb.trace
+ Change gdb.trace to use clean_restart more consistently.
+
+ Use clean_restart in gdb.opencl
+ Change gdb.opencl to use clean_restart more consistently.
+
+ Use clean_restart in gdb.linespec
+ Change gdb.linespec to use clean_restart more consistently.
+
+ Use clean_restart in gdb.pascal
+ Change gdb.pascal to use clean_restart more consistently.
+
+ Use mi_clean_restart more
+ This changes a number of MI tests to use mi_clean_restart rather than
+ separate calls. This reduces the number of lines, which is nice, and
+ also provides a nicer model to copy for future tests.
+
+ Start gdb after building executable in mi-basics.exp
+ A lot of the MI tests start gdb and only then build the executable.
+ This just seemed weird to me, so I've fixed this up. In this patch,
+ no other cleanups are done, the startup is just moved to a more
+ logical (to me) spot.
+
+ Remove unnecessary call to standard_testfile
+ This test does not build a program and does not need to call
+ standard_testfile.
+
+ Minor "require" fixups
+ I found a couple of spots that could use "require", and one spot where
+ hoisting the "require" closer to the top of the file made it more
+ clear.
+
+2023-01-27 Tom Tromey <tom@tromey.com>
+
+ Remove some dead code in gdb.fortran/info-types.exp
+ An early "return" in this test case prevents a test from running.
+ This seems to have been intentional and has been in place since:
+
+ commit d57cbee932f86df06251498daa93154046dc77c0
+ Author: Andrew Burgess <andrew.burgess@embecosm.com>
+ Date: Tue Dec 3 13:18:43 2019 +0000
+
+ gdb/testsuite/fortran: Fix info-modules/info-types for gfortran 8+
+
+ This patch removes the dead code.
+
+2023-01-27 Tom Tromey <tom@tromey.com>
+
+ Eliminate spurious returns from the test suite
+ A number of tests end with "return". However, this is unnecessary.
+ This patch removes all of these.
+
+ Use clean_restart in gdb.dlang
+ Change gdb.dlang to use clean_restart more consistently.
+
+ Use ordinary calling convention for clean_restart
+ clean_restart accepts a single optional argument. Rather than using
+ {args} and handling the argument by hand, change it to use Tcl's own
+ argument-checking.
+
+2023-01-27 GDB Administrator <gdbadmin@sourceware.org>
+
+ Automatic date update in version.in
+
+2023-01-26 Alan Modra <amodra@gmail.com>
+
+ Free gas/dwarf2dbg.c dirs
+ Entries are allocated with xmemdup0.
+
+ * dwarf2dbg.c (dwarf2_cleanup): Free dirs entries.
+
+2023-01-26 Alan Modra <amodra@gmail.com>
+
+ Sanity check dwarf5 form of .file
+ There's a comment a few lines earlier saying that demand_copy_C_string
+ has already reported an error if it returns NULL. Given the proximity
+ I decided not to duplicate the comment.
+
+ * dwarf2dbg.c (dwarf2_directive_filename): Check return of
+ demand_copy_C_string for file.
+
+2023-01-26 Alan Modra <amodra@gmail.com>
+
+ resolve gas shift expressions with large exponents to zero
+ * expr.c (resolve_expression <O_left_shift, O_right_shift>): Resolve
+ shifts exceeding bits in a valueT to zero.
+
+ segv in coff_aarch64_addr32nb_reloc
+ * coff-aarch64.c (coff_aarch64_addr32nb_reloc): When output_bfd
+ is NULL (which it is for objdump -W) get the output bfd via the
+ input section.
+
+2023-01-26 Simon Marchi <simon.marchi@efficios.com>
+
+ gdb/testsuite: initialize "correct" variable in gdb.cp/cpexprs.exp.tcl
+ Due to a GDB bug (visible when building with -D_GLIBCXX_DEBUG), GDB
+ crashes somewhere in the middle of gdb.cp/cpexprs.exp, and thus fails to
+ read the string, at gdb.cp/cpexprs.exp.tcl:725. The "correct" variable
+ doesn't get set, and I then see this TCL error:
+
+ ERROR: can't read "correct": no such variable
+
+ Avoid the TCL error by initializing the "correct" variable to a dummy
+ value.
+
+ Change-Id: I828968d9b2d105ef47f8da2ef598aa16a518c059
+
+2023-01-26 Simon Marchi <simon.marchi@efficios.com>
+
+ gdb/testsuite/dap: fix gdb.dap/basic-dap.exp disassembly test for PIE
+ Prior to this patch, I get:
+
+ >>> {"seq": 17, "type": "request", "command": "disassemble", "arguments": {"memoryReference": "0x115d", "instructionCount": 1}}
+ Content-Length: 147
+
+ {"request_seq": 17, "type": "response", "command": "disassemble", "success": false, "message": "Cannot access memory at address 0x115d", "seq": 41}FAIL: gdb.dap/basic-dap.exp: disassemble one instruction success
+ FAIL: gdb.dap/basic-dap.exp: instructions in disassemble output
+
+ The problem is that the PC to disassemble is taken from the breakpoint
+ insertion response, which happens before running. With a PIE
+ executable, that PC is unrelocated, but the disassembly request happens
+ after relocation.
+
+ I chose to fix this by watching for a breakpoint changed event giving
+ the new breakpoint address, and recording the address from there. I
+ think this is an interesting way to fix it, because it adds a bit of
+ test coverage, I don't think these events are checked right now.
+
+ Other ways to fix it would be:
+
+ - Get the address by doing a breakpoint insertion after the program is
+ started, or some other way.
+ - Do the disassembly by symbol instead of by address.
+ - Do the disassembly before running the program.
+
+ Change-Id: I3c396f796ac4c8b22e7dfd2fa1c5467f7a47e84e
+
+2023-01-26 Simon Marchi <simon.marchi@efficios.com>
+
+ gdb/testsuite/dap: make dap_wait_for_event_and_check return preceding messages
+ In the following patch, I change gdb.dap/basic-dap.exp such that after
+ waiting for some event, it checks if it received another event
+ meanwhile. To help with this, make dap_wait_for_event_and_check and
+ _dap_dap_wait_for_event return a list with everything received before
+ the event of interest. This is similar to what
+ dap_check_request_and_response returns.
+
+ Change-Id: I85c8980203a2dec833937e7552c2196bc137935d
+
+2023-01-26 Simon Marchi <simon.marchi@efficios.com>
+
+ gdb/testsuite/dap: rename dap_read_event to dap_wait_for_event_and_check
+ I think that name describes a bit better what the proc does, it is
+ similar to "wait_for" in tuiterm.exp.
+
+ Change-Id: Ie55aa011e6595dd1b5a874db13881ba572ace419
+
+2023-01-26 Simon Marchi <simon.marchi@efficios.com>
+
+ gdb/testsuite/dap: pass around dicts instead of TON objects
+ The DAP helper functions generally return TON objects. However, callers
+ almost all immediately use ton::2dict to convert them to dicts, to
+ access their contents. This commits makes things a bit simpler for them
+ by having function return dicts directly instead.
+
+ The downside is that the TON objects contain type information. For
+ instance, a "2" in a TCL dict could have been the integer 2 or the
+ string "2" in JSON. By converting to TCL dicts, we lose that
+ information. If some tests specifically want to check the types of some
+ fields, I think we can add intermediary functions that return TON
+ objects, without having to complicate other callers who don't care.
+
+ Change-Id: I2ca47bea355bf459090bae8680c6a917350b5c3f
+
+2023-01-26 Simon Marchi <simon.marchi@efficios.com>
+
+ gdb/testsuite/dap: remove catch from dap_read_event
+ This catch didn't cause me any trouble, but for the same reason as the
+ preceding patch, I think it's a bit better to just let any exception
+ propagate, to make for easier debugging.
+
+ Change-Id: I1779e62c788b77fef2d50434edf4c3d2ec5e1c4c
+
+2023-01-26 Simon Marchi <simon.marchi@efficios.com>
+
+ gdb/testsuite/dap: make dap_request_and_response not catch / issue test result
+ Following some of my changes, dap_request_and_response was failing and I
+ didn't know why. I think it's better to make it not catch any
+ exception, and just make it do a simple "send request, read response".
+ If an exception is thrown while sending a request or reading a response,
+ things are going really badly, it's not like we'll want to recover from
+ that and continue the test.
+
+ Change-Id: I27568d3547f753c3a74e3e5a730d38a8caef9356
+
+2023-01-26 Simon Marchi <simon.marchi@efficios.com>
+
+ gdb/testsuite/dap: write requests to gdb.log
+ This helps following what happens when reading gdb.log. The downside is
+ that it becomes harder to tell what text is from GDB and what text is
+ going to GDB, but I think that seeing responses without seeing requests
+ is even more confusing. At least, the lines are prefix with >>>, so
+ when you see this, you know that until the end of the line, it's
+ something that was sent to GDB, and not GDB output.
+
+ Change-Id: I1ba1acd8b16f4e64686c5ad268cc41082951c874
+
+2023-01-26 Simon Marchi <simon.marchi@efficios.com>
+
+ gdb/testsuite/dap: prefix some procs with _
+ Prefix some procs that are only used internally with an underscore, to
+ make it clear they are internal. If they need to be used by some test
+ later, we can always un-prefix them.
+
+ Change-Id: Iacb8e77363b5d1f8b98d9ba5a6d115aee5c8925d
+
+2023-01-26 Simon Marchi <simon.marchi@efficios.com>
+
+ gdb/testsuite/dap: use gdb_assert in gdb.dap/basic-dap.exp
+ Use gdb_assert instead of manual pass/fail.
+
+ Change-Id: I71fbc4e37a0a1ef4783056c7424e932651fa397f
+
+2023-01-26 Vladimir Mezentsev <vladimir.mezentsev@oracle.com>
+
+ gprofng: PR30043 libgprofng.so.* are installed to a wrong location
+ gprofng/ChangeLog
+ 2023-01-25 Vladimir Mezentsev <vladimir.mezentsev@oracle.com>
+
+ PR gprofng/30043
+ PR gprofng/28972
+ * src/Makefile.am: Use lib_LTLIBRARIES instead of pkglib_LTLIBRARIES.
+ * src/Makefile.in: Rebuild.
+
+2023-01-26 Tom de Vries <tdevries@suse.de>
+
+ [gdb/testsuite] Add gdb.base/unwind-on-each-insn-{amd64,i386}.exp
+ The gcc 4.4.x (and earlier) compilers had the problem that the unwind info in
+ the epilogue was inaccurate.
+
+ In order to work around this in gdb, epilogue unwinders were added with a
+ higher priority than the dwarf unwinders in the amd64 and i386 targets:
+ - amd64_epilogue_frame_unwind, and
+ - i386_epilogue_frame_unwind.
+
+ Subsequently, the epilogue unwind info problem got fixed in gcc 4.5.0.
+
+ However, the epilogue unwinders prevented gdb from taking advantage of the
+ fixed epilogue unwind info, so the scope of the epilogue unwinders was
+ limited, bailing out for gcc >= 4.5.0.
+
+ There was no regression test added for this preference scheme, so if we now
+ declare epilogue unwind info from all gcc versions as trusted, no test will
+ start failing.
+
+ Fix this by adding an amd64 and i386 regression test for this.
+
+ I have no gcc 4.4.x lying around, so I fabricated the assembly files by:
+ - commenting out some .cfi directives to break the epilogue unwind info, and
+ - hand-editing the producer info to 4.4.7 to activate the fix.
+
+ Tested on x86_64-linux, target boards unix/{-m64,-m32}.
+
+2023-01-26 Tom de Vries <tdevries@suse.de>
+
+ [gdb/testsuite] Add and use is_x86_64_m64_target
+ Add new proc is_x86_64_m64_target and use it where appropriate.
+
+ Tested on x86_64-linux.
+
+2023-01-26 GDB Administrator <gdbadmin@sourceware.org>
+
+ Automatic date update in version.in
+
+2023-01-25 Mark Harmstone <mark@harmstone.com>
+
+ ld/testsuite: Add missing targets to PDB tests
+
+2023-01-25 Mark Harmstone <mark@harmstone.com>
+
+ ld: Add pdb support to aarch64-w64-mingw32
+ This extends PDB support to the aarch64 PE targets.
+
+ The changes to the test files are just to make it so they can be assembled as
+ either x86, x86_64, or aarch64, mainly by changing the comment style.
+ The only actual code change here is in adding the architecture constants
+ to pdb.c.
+
+2023-01-25 Torbjörn SVENSSON <torbjorn.svensson@foss.st.com>
+
+ gdb/arm: Use new dwarf2 function cache
+ This patch resolves the performance issue reported in pr/29738 by
+ caching the values for the stack pointers for the inner frame. By
+ doing so, the impact can be reduced to checking the state and
+ returning the appropriate value.
+
+2023-01-25 Torbjörn SVENSSON <torbjorn.svensson@foss.st.com>
+
+ gdb: dwarf2 generic implementation for caching function data
+ When there is no dwarf2 data for a register, a function can be called
+ to provide the value of this register. In some situations, it might
+ not be trivial to determine the value to return and it would cause a
+ performance bottleneck to do the computation each time.
+
+ This patch allows the called function to have a "cache" object that it
+ can use to store some metadata between calls to reduce the performance
+ impact of the complex logic.
+
+ The cache object is unique for each function and frame, so if there are
+ more than one function pointer stored in the dwarf2_frame_cache->reg
+ array, then the appropriate pointer will be supplied (the type is not
+ known by the dwarf2 implementation).
+
+ dwarf2_frame_get_fn_data can be used to retrieve the function unique
+ cache object.
+ dwarf2_frame_allocate_fn_data can be used to allocate and retrieve the
+ function unique cache object.
+
+2023-01-25 Tom Tromey <tromey@adacore.com>
+
+ Clean up unusual code in mi-cmd-stack.c
+ I noticed some unusual code in mi-cmd-stack.c. This code is a switch,
+ where one of the cases appears in the middle of another block. It
+ seemed cleaner to me to have the earlier case just conditionally fall
+ through.
+
+2023-01-25 H.J. Lu <hjl.tools@gmail.com>
+
+ i386: Pass -Wl,--no-as-needed to compiler as needed
+ Pass -Wl,--no-as-needed to linker tests to fix
+
+ FAIL: Run pr19031
+ FAIL: Run got1
+ FAIL: Undefined weak symbol (-fPIE -no-pie)
+ FAIL: Undefined weak symbol (-fPIE -pie)
+
+ when --as-needed is passed to linker by compiler.
+
+ PR ld/30050
+ * testsuite/ld-i386/i386.exp: Pass -Wl,--no-as-needed to compiler
+ as needed.
+
+2023-01-25 Tom Tromey <tom@tromey.com>
+
+ Move target check into allow_altivec_tests
+ Pedro pointed out that only PPC can possibly have altivec, so we can
+ move the target check into allow_altivec_tests.
+
+ Use require with is_remote
+ This changes some tests to use require with 'is_remote', rather than
+ an explicit test. This adds uniformity helps clean up more spots
+ where a test might exit early without any notification.
+
+2023-01-25 Tom Tromey <tom@tromey.com>
+
+ Add unsupported calls where needed
+ A number of tests will exit early without saying why. This patch adds
+ "unsupported" at spots like this that I could readily find.
+
+ There are definitely more of these; for example dw2-ranges.exp fails
+ silently because a compilation fails. I didn't attempt to address
+ these as that is a much larger task.
+
+2023-01-25 Tom Tromey <tom@tromey.com>
+
+ Introduce and use is_any_target
+ A few tests work on two different targets that can't be detected with
+ a single call to istarget -- that proc only accepts globs, not regular
+ expressions.
+
+ This patch introduces a new is_any_target proc and then converts these
+ tests to use it in a 'require'.
+
+2023-01-25 Tom Tromey <tom@tromey.com>
+
+ Use require with istarget
+ This changes many tests to use require when checking 'istarget'. A
+ few of these conversions were already done in earlier patches.
+
+ No change was needed to 'require' to make this work, due to the way it
+ is written. I think the result looks pretty clear, and it has the
+ bonus of helping to ensure that the reason that a test is skipped is
+ always logged.
+
+2023-01-25 Tom Tromey <tom@tromey.com>
+
+ Rename skip_vsx_tests to allow form
+ This renames skip_vsx_tests to allow_vsx_tests and updates it users to
+ use require.
+
+ Rename skip_power_isa_3_1_tests to allow form
+ This renames skip_power_isa_3_1_tests to allow_power_isa_3_1_tests and
+ updates its users to use require.
+
+ Rename skip_float_test to allow form
+ This renames skip_float_test to allow_float_test and updates its users
+ to use require.
+
+ Convert skip_altivec_tests to allow form
+ This renames skip_altivec_tests to allow_altivec_tests and updates its
+ users to use require.
+
+2023-01-25 Tom de Vries <tdevries@suse.de>
+
+ [gdb/testsuite] Fix gdb.base/unwind-on-each-insn.exp for -m32
+ With test-case gdb.base/unwind-on-each-insn.exp and target board unix/-m32, I
+ now get:
+ ...
+ # of expected passes 25
+ ...
+ instead of:
+ ...
+ # of expected passes 133
+ ...
+ as I used to get before commit d25a8dbc7c3 ("[gdb/testsuite] Allow debug
+ srcfile2 in gdb.base/unwind-on-each-insn.exp"), due to the test-case trying to match
+ "rip = " and info frame printing "eip = " instead.
+
+ Fix this by dropping "rip" from the regexp.
+
+ Tested on x86_64-linux, target boards unix/{-m64,-m32}.
+
+2023-01-25 Tom de Vries <tdevries@suse.de>
+
+ [gdb/testsuite] Allow debug srcfile2 in gdb.base/unwind-on-each-insn.exp
+ Test-case gdb.base/unwind-on-each-insn.exp compiles $srcfile with debug info, and
+ $srcfile2 without.
+
+ Occasionally, I try both files with debug info:
+ ...
+ - $srcfile $debug_flags $srcfile2 $nodebug_flags]]} {
+ + $srcfile $debug_flags $srcfile2 $debug_flags]]} {
+ ...
+
+ This shortcuts the test due to no longer recognizing that stepi still lands
+ in foo.
+
+ Fix this by determining whether still in foo by checking the info frame output.
+
+ Tested on x86_64-linux.
+
+2023-01-25 Tom de Vries <tdevries@suse.de>
+
+ [gdb/testsuite] Allow nodebug srcfile in gdb.base/unwind-on-each-insn.exp
+ Test-case gdb.base/unwind-on-each-insn.exp compiles $srcfile with debug info, and
+ $srcfile2 without.
+
+ Occasionally, I try both files with debug info:
+ ...
+ - $srcfile $debug_flags $srcfile2 $nodebug_flags]]} {
+ + $srcfile $debug_flags $srcfile2 $debug_flags]]} {
+ ...
+ and both files without:
+ ...
+ - $srcfile $debug_flags $srcfile2 $nodebug_flags]]} {
+ + $srcfile $nodebug_flags $srcfile2 $nodebug_flags]]} {
+ ...
+
+ In the latter case, I run into:
+ ...
+ FAIL: gdb.base/unwind-on-each-insn.exp: foo: instruction 1: bt 2
+ FAIL: gdb.base/unwind-on-each-insn.exp: foo: instruction 1: up
+ ...
+ due to a mismatch between the regexp and the different output due to using
+ nodebug.
+
+ Fix this by making the regexp less strict.
+
+ Tested on x86_64-linux.
+
+2023-01-25 Felix Willgerodt <felix.willgerodt@intel.com>
+
+ gdb, i386: Update stale comment in i386-tdep.h.
+ The comment seems no longer valid, the functions technically check for
+ non-pseudo registers, like zmmh. Which is a valid use case.
+
+2023-01-25 Tom de Vries <tdevries@suse.de>
+
+ [gdb/testsuite] Analyze non-leaf fn in gdb.base/unwind-on-each-insn.exp
+ In test-case gdb.base/unwind-on-each-insn.exp, we stepi through function foo
+ to check various invariants at each insn, in particular hoping to excercise
+ insns that modify stack and frame pointers.
+
+ Function foo is a leaf function, so add a non-leaf function bar, and step
+ through it as well (using nexti instead of stepi).
+
+ With the updated test-case, on powerpc64le-linux, I run into PR tdep/30049:
+ ...
+ FAIL: bar: instruction 5: bt 2
+ FAIL: bar: instruction 5: up
+ FAIL: bar: instruction 5: [string equal $fid $::main_fid]
+ FAIL: bar: instruction 6: bt 2
+ FAIL: bar: instruction 6: up
+ FAIL: bar: instruction 6: [string equal $fid $::main_fid]
+ ...
+
+ Tested on:
+ - x86_64-linux (-m64 and -m32)
+ - s390x-linux (-m64 and -m31)
+ - aarch64-linux
+ - powerpc64le-linux
+
+2023-01-25 Tom de Vries <tdevries@suse.de>
+
+ [gdb/testsuite] Improve leaf fn in gdb.base/unwind-on-each-insn.exp
+ In test-case gdb.base/unwind-on-each-insn.exp, we stepi through function foo
+ to check various invariants at each insn, in particular hoping to excercise
+ insns that modify stack and frame pointers.
+
+ For x86_64-linux, we have a reasonably complex foo (and similar for -m32):
+ ...
+ 4004bc: 55 push %rbp
+ 4004bd: 48 89 e5 mov %rsp,%rbp
+ 4004c0: 90 nop
+ 4004c1: 5d pop %rbp
+ 4004c2: c3 ret
+ ...
+ Both stack pointer (%rsp) and frame pointer (%rbp) are modified.
+
+ Also for s390x-linux (and similar for -m31):
+ ...
+ 0000000001000668 <foo>:
+ 1000668: e3 b0 f0 58 00 24 stg %r11,88(%r15)
+ 100066e: b9 04 00 bf lgr %r11,%r15
+ 1000672: e3 b0 b0 58 00 04 lg %r11,88(%r11)
+ 1000678: 07 fe br %r14
+ ...
+ Frame pointer (%r11) is modified.
+
+ Likewise for powerpc64le-linux:
+ ...
+ 00000000100006c8 <foo>:
+ 100006c8: f8 ff e1 fb std r31,-8(r1)
+ 100006cc: d1 ff 21 f8 stdu r1,-48(r1)
+ 100006d0: 78 0b 3f 7c mr r31,r1
+ 100006d4: 00 00 00 60 nop
+ 100006d8: 30 00 3f 38 addi r1,r31,48
+ 100006dc: f8 ff e1 eb ld r31,-8(r1)
+ 100006e0: 20 00 80 4e blr
+ ...
+ Both stack pointer (r1) and frame pointer (r31) are modified.
+
+ But for aarch64-linux, we have:
+ ...
+ 00000000004005fc <foo>:
+ 4005fc: d503201f nop
+ 400600: d65f03c0 ret
+ ...
+ There's no insn that modifies stack or frame pointer.
+
+ Fix this by making foo more complex, adding an (unused) argument:
+ ...
+ 0000000000400604 <foo>:
+ 400604: d10043ff sub sp, sp, #0x10
+ 400608: f90007e0 str x0, [sp, #8]
+ 40060c: d503201f nop
+ 400610: 910043ff add sp, sp, #0x10
+ 400614: d65f03c0 ret
+ ...
+ such that the stack pointer (sp) is modified.
+
+ [ Note btw that we're seeing the effects of -momit-leaf-frame-pointer, with
+ -mno-omit-leaf-frame-pointer we have instead:
+ ...
+ 0000000000400604 <foo>:
+ 400604: a9be7bfd stp x29, x30, [sp, #-32]!
+ 400608: 910003fd mov x29, sp
+ 40060c: f9000fa0 str x0, [x29, #24]
+ 400610: d503201f nop
+ 400614: a8c27bfd ldp x29, x30, [sp], #32
+ 400618: d65f03c0 ret
+ ...
+ such that also the frame pointer (x29) is modified. ]
+
+ Having made foo more complex, we now run into the following fail on
+ x86_64/-m32:
+ ...
+ FAIL: gdb.base/unwind-on-each-insn.exp: instruction 1: $sp_value == $main_sp
+ ....
+
+ The problem is that the stack pointer has changed inbetween the sampling of
+ main_sp and *foo, in particular by the push insn:
+ ...
+ 804841a: 68 c0 84 04 08 push $0x80484c0
+ 804841f: e8 10 00 00 00 call 8048434 <foo>
+ ...
+
+ Fix this by updating main_sp.
+
+ On powerpc64le-linux, with gcc 7.5.0 I now run into PR tdep/30021:
+ ...
+ FAIL: gdb.base/unwind-on-each-insn.exp: insn 7: $fba_value == $main_fba
+ FAIL: gdb.base/unwind-on-each-insn.exp: insn 7: [string equal $fid $main_fid]
+ ...
+ but I saw the same failure before this commit with gcc 4.8.5.
+
+ Tested on:
+ - x86_64-linux (-m64 and -m32)
+ - s390x-linux (-m64 and -m31)
+ - powerpc64le-linux
+ - aarch64-linux
+
+ Also I've checked that the test-case still functions as regression test for PR
+ record/16678 on x86_64.
+
+2023-01-25 Andrew Burgess <aburgess@redhat.com>
+
+ gdb/tui: make use of a scoped_restore
+ Make use of a scoped_restore object in tui_mld_read_key instead of
+ doing a manual save/restore.
+
+ I don't think the existing code can throw an exception, so this is
+ just a cleanup rather than a bug fix.
+
+ There should be no user visible changes after this commit.
+
+2023-01-25 Andrew Burgess <aburgess@redhat.com>
+
+ gdb/tui: better filtering of tab completion results for focus command
+ While working on the previous couple of commits, I noticed that the
+ 'focus' command would happily suggest 'status' as a possible focus
+ completion, even though the 'status' window is non-focusable, and,
+ after the previous couple of commits, trying to focus the status
+ window will result in an error.
+
+ This commit improves the tab-completion results for the focus command
+ so that the status window is not included.
+
+2023-01-25 Andrew Burgess <aburgess@redhat.com>
+
+ gdb/tui: convert if/error to an assert
+ While working on the previous commit, I realised that there was an
+ error in tui_set_focus_command that could never be triggered.
+
+ Since the big tui rewrite (adding dynamic layouts) it is no longer
+ true that there is a tui_win_info object for every window at all
+ times. We now only create a tui_win_info object for a particular
+ window, when the window is part of the current layout. As a result,
+ if we have a tui_win_info pointer, then the window must be visible
+ inside tui_set_focus_command (this function calls tui_enable as its
+ first action, which makes the current layout visible).
+
+ The gdb.tui/tui-focus.exp test script exercises this area of code, and
+ doesn't trigger the assert, nor do any of our other existing tui
+ tests.
+
+2023-01-25 Andrew Burgess <aburgess@redhat.com>
+
+ gdb/testsuite/tui: more testing of the 'focus' command
+ I noticed that we didn't have many tests of the tui 'focus' command,
+ so I started adding some. This exposed a bug in GDB; we are able to
+ focus windows that should not be focusable, e.g. the 'status' window.
+
+ This is harmless until we then do 'focus next' or 'focus prev', along
+ this code path we assert that the currently focused window is
+ focusable, which obviously, is not always true, so GDB fails with an
+ assertion error.
+
+ The fix is simple; add a check to the tui_set_focus_command function
+ to ensure that the selected window is focusable. If it is not then an
+ error is thrown. The new tests I've added cover this case.
+
+2023-01-25 Andrew Burgess <aburgess@redhat.com>
+
+ gdb/testsuite: update gdb.tui/tui-nl-filtered-output.exp
+ Following on from the previous commit, in this commit I am updating
+ the test script gdb.tui/tui-nl-filtered-output.exp to take account of
+ the changes in commit:
+
+ commit 9162a27c5f5828240b53379d735679e2a69a9f41
+ Date: Tue Nov 13 11:59:03 2018 -0700
+
+ Change gdb test suite's TERM setting
+
+ In the above commit the TERM environment variable was changed to be
+ 'dumb' by default, which means that tests, that previously activated
+ tui mode, no longer do unless TERM is set to 'ansi'.
+
+ As the gdb.tui/tui-nl-filtered-output.exp script didn't do this, the
+ test stopped working. As the expect patterns in this script were
+ pretty generic no tests actually started failing, and we never
+ noticed.
+
+ In this commit I update the test script to correctly activate our
+ terminal emulator, the test continues to pass after this update, but
+ now we are testing in tui mode.
+
+2023-01-25 Andrew Burgess <aburgess@redhat.com>
+
+ gdb/testsuite: update gdb.tui/tui-disasm-long-lines.exp
+ Following on from the previous commit, in this commit I am updating
+ the test script gdb.tui/tui-disasm-long-lines.exp to take account of
+ the changes in commit:
+
+ commit 9162a27c5f5828240b53379d735679e2a69a9f41
+ Date: Tue Nov 13 11:59:03 2018 -0700
+
+ Change gdb test suite's TERM setting
+
+ In the above commit the TERM environment variable was changed to be
+ 'dumb' by default, which means that tests, that previously activated
+ tui mode, no longer do unless TERM is set to 'ansi'.
+
+ As the gdb.tui/tui-disasm-long-lines.exp script didn't do this, the
+ test stopped working. As the expect patterns in this script were
+ pretty generic no tests actually started failing, and we never
+ noticed.
+
+ In this commit I update the script to use Term::clean_restart, which
+ correctly sets TERM to 'ansi'. I've also added a check that the asm
+ box does appear on the screen, which should indicate that tui mode has
+ correctly activated.
+
+ However, I also notice that GDB doesn't appear to fully work
+ correctly. The test should display the disassembly for the test
+ program, but it doesn't.
+
+ The test is trying to disassemble some code that (deliberately) uses a
+ very long symbol name, this eventually results in GDB entering
+ tui_source_window_base::show_source_content and trying to allocate an
+ ncurses pad in order to hold the current page of disassembler output.
+
+ Unfortunately, due to the very long line, the call to newpad fails,
+ meaning that tui_source_window_base::m_pad is nullptr. Luckily non of
+ the following calls appear to crash when passed a nullptr, however,
+ all the output that is written to the pad is lost, which is why we
+ don't see any assembly code written to the screen.
+
+ As the test history indicates that the script was originally checking
+ for a crash in GDB when the long identifier was encountered, I think
+ there is value in just leaving the test as it is for now, I have a fix
+ for the issue of the newpad call failing, which I'll post in a follow
+ up commit later.
+
+2023-01-25 Andrew Burgess <aburgess@redhat.com>
+
+ gdb/testsuite: extend gdb.tui/tui-layout.exp test script
+ In passing I noticed that the gdb.tui/tui-layout.exp test script was a
+ little strange, it tests the layout command multiple times, but never
+ sets up our ANSI terminal emulator, so every layout command fails with
+ a message about the terminal lacking the required abilities.
+
+ It turns out that this was caused by this commit:
+
+ commit 9162a27c5f5828240b53379d735679e2a69a9f41
+ Date: Tue Nov 13 11:59:03 2018 -0700
+
+ Change gdb test suite's TERM setting
+
+ This was when we changed the testsuite to set the TERM environment
+ variable to "dumb" by default.
+
+ After this, any tui test that didn't set the terminal mode back to
+ 'ansi' would fail to activate tui mode.
+
+ For the tui-layout.exp test it just so happens that the test patterns
+ are generic enough that the test continued to pass, even after this
+ change.
+
+ In this commit I have updated the test so we now check the layout
+ command both with a 'dumb' terminal and with the 'ansi' terminal.
+ When testing with the 'ansi' terminal, I have some limited validation
+ that GDB correctly entered tui mode.
+
+ I figured that it is probably worth having at least one test in the
+ test suite that deliberately tries to enter tui mode in a dumb
+ terminal, it would be sad if we one day managed to break GDB such that
+ this caused a crash, and never noticed.
+
+2023-01-25 Andrew Burgess <aburgess@redhat.com>
+
+ gdb/testsuite: rename test source file to match test script
+ The previous commit touched the source file for the test script
+ gdb.cp/cpcompletion.exp. This source file is called pr9594.cc. The
+ source file is only used by the one test script.
+
+ This commit renames the source file to cpcompletion.cc to match the
+ test script, this is more inline with how we name source files these
+ days.
+
+2023-01-25 Andrew Burgess <aburgess@redhat.com>
+
+ gdb/testsuite: use test_gdb_complete_unique more in C++ tests
+ Spotted in gdb.cp/cpcompletion.exp that we could replace some uses of
+ gdb_test with test_gdb_complete_unique, this will extend the
+ completion testing to check tab-completion as well as completion using
+ the 'complete' command in some additional cases.
+
+2023-01-25 GDB Administrator <gdbadmin@sourceware.org>
+
+ Automatic date update in version.in
+
+2023-01-24 Vladimir Mezentsev <vladimir.mezentsev@oracle.com>
+
+ gprofng: PR29521 [docs] man pages are not in the release tarball
+ gprofng/ChangeLog
+ 2023-01-20 Vladimir Mezentsev <vladimir.mezentsev@oracle.com>
+
+ PR gprofng/29521
+ * configure.ac: Check if $MAKEINFO and $HELP2MAN are missing.
+ * Makefile.am: Build doc if $MAKEINFO exists.
+ * doc/gprofng.texi: Update documentation for gprofng.
+ * doc/Makefile.am: Build gprofng.1.
+ * src/Makefile.am: Move the build of gprofng.1 to doc/Makefile.am.
+ * configure: Rebuild.
+ * Makefile.in: Rebuild.
+ * doc/Makefile.in: Rebuild.
+ * src/Makefile.in: Rebuild.
+
+2023-01-24 Indu Bhagat <indu.bhagat@oracle.com>
+
+ libsframe/doc: fix some warnings
+ 'make pdf' in libsframe shows some warnings, some of which (especially
+ the Overfull warnings) are causing undesirable effects on the rendered
+ output. Few examples of the warnings:
+
+ Underfull \hbox (badness 10000) in paragraph at lines 406--407
+ @texttt pauth_
+
+ Underfull \hbox (badness 10000) in paragraph at lines 407--410
+ @textrm Specify which key is used for signing the return
+
+ ...
+
+ Overfull \hbox (2.0987pt too wide) in paragraph at lines 412--413
+ @texttt fdetype[]|
+
+ ...
+
+ Overfull \hbox (28.87212pt too wide) in paragraph at lines 446--447
+ @textrm SFRAME[]FDE[]TYPE[]PCMASK|
+
+ ...
+
+ This patch adjusts column widths of the affected cells to fix a subset
+ of these warnings. For the rest of the warnings, use explicit newline
+ command to fix them.
+
+ libsframe/
+ * doc/sframe-spec.texi: Fix various underfull and overfull
+ warnings.
+
+2023-01-24 Nick Clifton <nickc@redhat.com>
+
+ Fix seg-fault when generating an empty DLL with LTO enabled.
+ ld PR 29998
+ * pe-dll.c (generate_reloc): Handle sections
+ with no assigned output section.
+ Terminate early of there are no relocs to put
+ in the .reloc section.
+ (pe_exe_fill_sections): Do not emit an empty
+ .reloc section.
+
+ bfd * cofflink.c (_bfd_coff_generic_relocate_section):
+ Add an assertion that the output section is set
+ for defined, global symbols.
+
+2023-01-24 Enze Li <enze.li@hotmail.com>
+
+ gdb: some int to bool conversion
+ When building GDB with clang 16, I got this,
+
+ CXX maint.o
+ maint.c:1045:23: error: implicit truncation from 'int' to a one-bit wide bit-field changes value from 1 to -1 [-Werror,-Wsingle-bit-bitfield-constant-conversion]
+ m_space_enabled = 1;
+ ^ ~
+ maint.c:1057:22: error: implicit truncation from 'int' to a one-bit wide bit-field changes value from 1 to -1 [-Werror,-Wsingle-bit-bitfield-constant-conversion]
+ m_time_enabled = 1;
+ ^ ~
+ maint.c:1073:24: error: implicit truncation from 'int' to a one-bit wide bit-field changes value from 1 to -1 [-Werror,-Wsingle-bit-bitfield-constant-conversion]
+ m_symtab_enabled = 1;
+ ^ ~
+ 3 errors generated.
+
+ Work around this by using bool bitfields instead.
+
+ Tested by rebuilding on x86_64-linux with clang 16 and gcc 12.
+
+ Approved-By: Tom Tromey <tom@tromey.com>
+
+2023-01-24 Mark Harmstone <mark@harmstone.com>
+
+ ld: Avoid magic numbers for subsystems in pe.em and pep.em
+
+2023-01-24 GDB Administrator <gdbadmin@sourceware.org>
+
+ Automatic date update in version.in
+
+2023-01-23 Mark Harmstone <mark@harmstone.com>
+
+ ld: Set default subsystem for arm-pe to IMAGE_SUBSYSTEM_WINDOWS_GUI
+ This fixes the test failures introduced by 87a5cf5c, by changing the
+ default subsystem for arm-pe from 9 (IMAGE_SUBSYSTEM_WINDOWS_CE_GUI) to
+ 2 (IMAGE_SUBSYSTEM_WINDOWS_GUI), which matches what happens with other
+ PE targets.
+
+ As far as I can tell there's no working modern Windows CE toolchain
+ knocking about anyway, so this change shouldn't inconvenience anyone.
+
+2023-01-23 Mark Harmstone <mark@harmstone.com>
+
+ Add support for secidx relocations to aarch64-w64-mingw32
+ This patch adds support for the .secidx directive and its corresponding
+ relocation to aarch64-w64-mingw32. As with x86, this is a two-byte LE
+ integer which gets filled in with the 1-based index of the output
+ section that a symbol ends up in.
+
+ This is needed for PDBs, which represent addresses as a .secrel32,
+ .secidx pair.
+
+ The test is substantially the same as for amd64, but with changes made
+ for padding and alignment.
+
+2023-01-23 Tom de Vries <tdevries@suse.de>
+
+ [gdb/tdep, aarch64] Fix frame address of last insn
+ Consider the test-case test.c, compiled without debug info:
+ ...
+ void
+ foo (const char *s)
+ {
+ }
+
+ int
+ main (void)
+ {
+ foo ("foo");
+ return 0;
+ }
+ ...
+
+ Disassembly of foo:
+ ...
+ 0000000000400564 <foo>:
+ 400564: d10043ff sub sp, sp, #0x10
+ 400568: f90007e0 str x0, [sp, #8]
+ 40056c: d503201f nop
+ 400570: 910043ff add sp, sp, #0x10
+ 400574: d65f03c0 ret
+ ...
+
+ Now, let's do "info frame" at each insn in foo, as well as printing $sp
+ and $x29 (and strip the output of info frame to the first line, for brevity):
+ ...
+ $ gdb -q a.out
+ Reading symbols from a.out...
+ (gdb) b *foo
+ Breakpoint 1 at 0x400564
+ (gdb) r
+ Starting program: a.out
+
+ Breakpoint 1, 0x0000000000400564 in foo ()
+ (gdb) display /x $sp
+ 1: /x $sp = 0xfffffffff3a0
+ (gdb) display /x $x29
+ 2: /x $x29 = 0xfffffffff3a0
+ (gdb) info frame
+ Stack level 0, frame at 0xfffffffff3a0:
+ (gdb) si
+ 0x0000000000400568 in foo ()
+ 1: /x $sp = 0xfffffffff390
+ 2: /x $x29 = 0xfffffffff3a0
+ (gdb) info frame
+ Stack level 0, frame at 0xfffffffff3a0:
+ (gdb) si
+ 0x000000000040056c in foo ()
+ 1: /x $sp = 0xfffffffff390
+ 2: /x $x29 = 0xfffffffff3a0
+ (gdb) info frame
+ Stack level 0, frame at 0xfffffffff3a0:
+ (gdb) si
+ 0x0000000000400570 in foo ()
+ 1: /x $sp = 0xfffffffff390
+ 2: /x $x29 = 0xfffffffff3a0
+ (gdb) info frame
+ Stack level 0, frame at 0xfffffffff3a0:
+ (gdb) si
+ 0x0000000000400574 in foo ()
+ 1: /x $sp = 0xfffffffff3a0
+ 2: /x $x29 = 0xfffffffff3a0
+ (gdb) info frame
+ Stack level 0, frame at 0xfffffffff3b0:
+ pc = 0x400574 in foo; saved pc = 0x40058c
+ (gdb) si
+ 0x000000000040058c in main ()
+ 1: /x $sp = 0xfffffffff3a0
+ 2: /x $x29 = 0xfffffffff3a0
+ ...
+
+ The "frame at" bit lists 0xfffffffff3a0 except at the last insn, where it
+ lists 0xfffffffff3b0.
+
+ The frame address is calculated here in aarch64_make_prologue_cache_1:
+ ...
+ unwound_fp = get_frame_register_unsigned (this_frame, cache->framereg);
+ if (unwound_fp == 0)
+ return;
+
+ cache->prev_sp = unwound_fp + cache->framesize;
+ ...
+
+ For insns after the prologue, we have cache->framereg == sp and
+ cache->framesize == 16, so unwound_fp + cache->framesize gives the wrong
+ answer once sp has been restored to entry value by the before-last insn.
+
+ Fix this by detecting the situation that the sp has been restored.
+
+ This fixes PRs tdep/30010 and tdep/30011.
+
+ This also fixes the aarch64 FAILs in gdb.reverse/solib-precsave.exp and
+ gdb.reverse/solib-reverse.exp I reported in PR gdb/PR29721.
+
+ Tested on aarch64-linux.
+ PR tdep/30010
+ PR tdep/30011
+ Bug: https://sourceware.org/bugzilla/show_bug.cgi?id=30010
+ Bug: https://sourceware.org/bugzilla/show_bug.cgi?id=30011
+
+2023-01-23 Tom de Vries <tdevries@suse.de>
+
+ [gdb/testsuite] Avoid using .eh_frame in gdb.base/unwind-on-each-insn.exp
+ One purpose of the gdb.base/unwind-on-each-insn.exp test-case is to test the
+ architecture-specific unwinders on foo, so unwind-on-each-insn-foo.c is
+ compiled with nodebug, to prevent the dwarf unwinders from taking effect.
+
+ For for instance gcc x86_64 though, -fasynchronous-unwind-tables is enabled by
+ default, generating an .eh_frame section contribution which might enable the
+ dwarf unwinders and bypass the architecture-specific unwinders.
+
+ Currently, that happens to be not the case due to the current implementation
+ of epilogue_unwind_valid, which assumes that in absence of debug info proving
+ that the compiler is gcc >= 4.5.0, the .eh_frame contribution is invalid.
+
+ That may change though, see PR30028, in which case
+ gdb.base/unwind-on-each-insn.exp stops being a regression test for commit
+ 49d7cd733a7 ("Change calculation of frame_id by amd64 epilogue unwinder").
+
+ Fix this by making sure that we don't use .eh_frame info regardless of
+ epilogue_unwind_valid, simply by not generating it using
+ -fno-asynchronous-unwind-tables.
+
+ Tested on x86_64-linux, target boards unix/{-m64,-m32}, using compilers
+ gcc 7.5.0 and clang 13.0.1.
+
+2023-01-23 Nick Clifton <nickc@redhat.com>
+
+ Updated Swedish translation for the binutils sub-directory
+
+2023-01-23 Tom de Vries <tdevries@suse.de>
+
+ [gdb/testsuite] Simplify gdb.base/unwind-on-each-insn.exp
+ In test-case gdb.base/unwind-on-each-insn.exp, we try to determine the last
+ disassembled insn in function foo.
+
+ This in it self is fragile, as demonstrated by commit 91836f41e20 ("Powerpc
+ fix for gdb.base/unwind-on-each-insn.exp").
+
+ The use of the last disassembled insn in the test-case is to stop stepping in
+ foo once reaching it.
+
+ However, the intent is to stop stepping just before returning to main.
+
+ There is no guarantee that the last disassembled insn:
+ - is actually executed
+ - is executed just before returning to main
+ - is executed only once.
+
+ Fix this by simplying the test-case to continue stepping till stepping out of
+ foo.
+
+ Tested on x86_64-linux.
+
+2023-01-23 Tom de Vries <tdevries@suse.de>
+
+ [gdb/testsuite] Fix untested in gdb.base/frame-view.exp
+ When running test-case gdb.base/frame-view.exp, I see:
+ ...
+ gdb compile failed, ld: frame-view0.o: in function `main':
+ frame-view.c:73: undefined reference to `pthread_create'
+ ld: frame-view.c:76: undefined reference to `pthread_join'
+ collect2: error: ld returned 1 exit status
+ UNTESTED: gdb.base/frame-view.exp: failed to prepare
+ ...
+
+ Fix this by adding pthreads to the compilation flags.
+
+ Tested on x86_64-linux.
+
+2023-01-23 Vladislav Khmelevsky <och95@yandex.ru>
+
+ Fix objdump --reloc for specific symbol
+ If objdump is used with both --disassemble=symbol and --reloc options
+ skip relocations that have addresses before the symbol, so that they
+ are not displayed.
+
+2023-01-23 GDB Administrator <gdbadmin@sourceware.org>
+
+ Automatic date update in version.in
+
+2023-01-22 Tom Tromey <tom@tromey.com>
+
+ Remove path name from test
+ The test suite reports several path names in tests. I couldn't find
+ most of these, and I suspect they are false reports, but I did manage
+ to locate one. This one is probably harmless, as I think the path
+ does not vary; but it's also easy to fix and suppress one warning.
+
+ Minor cleanup in gdb.btrace/enable.exp
+ I noticed a weird-looking bit of code in gdb.btrace/enable.exp that is
+ left over from an earlier change. This patch moves the "!" inside the
+ braces, where it belongs.
+
+ Minor fixup in allow_aarch64_sve_tests
+ An earlier patch failed to update a string in allow_aarch64_sve_tests.
+
+2023-01-22 GDB Administrator <gdbadmin@sourceware.org>
+
+ Automatic date update in version.in
+
+2023-01-21 GDB Administrator <gdbadmin@sourceware.org>
+
+ Automatic date update in version.in
+
+2023-01-20 Simon Marchi <simon.marchi@efficios.com>
+
+ gdb: make frame_info_ptr auto-reinflatable
+ This is the second step of making frame_info_ptr automatic, reinflate on
+ demand whenever trying to obtain the wrapper frame_info pointer, either
+ through the get method or operator->. Make the reinflate method
+ private, it is used as a convenience method in those two.
+
+ Add an "is_null" method, because it is often needed to know whether the
+ frame_info_ptr wraps an frame_info or is empty.
+
+ Make m_ptr mutable, so that it's possible to reinflate const
+ frame_info_ptr objects. Whether m_ptr is nullptr or not does not change
+ the logical state of the object, because we re-create it on demand. I
+ believe this is the right use case for mutable.
+
+ Change-Id: Icb0552d0035e227f81eb3c121d8a9bb2f9d25794
+ Reviewed-By: Bruno Larsen <blarsen@redhat.com>
+
+2023-01-20 Simon Marchi <simon.marchi@efficios.com>
+
+ gdb: make frame_info_ptr grab frame level and id on construction
+ This is the first step of making frame_info_ptr automatic. Remove the
+ frame_info_ptr::prepare_reinflate method, move that code to the
+ constructor.
+
+ Change-Id: I85cdae3ab1c043c70e2702e7fb38e9a4a8a675d8
+ Reviewed-By: Bruno Larsen <blarsen@redhat.com>
+
+2023-01-20 Simon Marchi <simon.marchi@polymtl.ca>
+
+ gdb: make user-created frames reinflatable
+ This patch teaches frame_info_ptr to reinflate user-created frames
+ (frames created through create_new_frame, with the "select-frame view"
+ command).
+
+ Before this patch, frame_info_ptr doesn't support reinflating
+ user-created frames, because it currently reinflates by getting the
+ current target frame (for frame 0) or frame_find_by_id (for other
+ frames). To reinflate a user-created frame, we need to call
+ create_new_frame, to make it lookup an existing user-created frame, or
+ otherwise create one.
+
+ So, in prepare_reinflate, get the frame id even if the frame has level
+ 0, if it is user-created. In reinflate, if the saved frame id is user
+ create it, call create_new_frame.
+
+ In order to test this, I initially enhanced the gdb.base/frame-view.exp
+ test added by the previous patch by setting a pretty-printer for the
+ type of the function parameters, in which we do an inferior call. This
+ causes print_frame_args to not reinflate its frame (which is a
+ user-created one) properly. On one machine (my Arch Linux one), it
+ properly catches the bug, as the frame is not correctly restored after
+ printing the first parameter, so it messes up the second parameter:
+
+ frame
+ #0 baz (z1=hahaha, z2=<error reading variable: frame address is not available.>) at /home/simark/src/binutils-gdb/gdb/testsuite/gdb.base/frame-view.c:40
+ 40 return z1.m + z2.n;
+ (gdb) FAIL: gdb.base/frame-view.exp: with_pretty_printer=true: frame
+ frame
+ #0 baz (z1=hahaha, z2=<error reading variable: frame address is not available.>) at /home/simark/src/binutils-gdb/gdb/testsuite/gdb.base/frame-view.c:40
+ 40 return z1.m + z2.n;
+ (gdb) FAIL: gdb.base/frame-view.exp: with_pretty_printer=true: frame again
+
+ However, on another machine (my Ubuntu 22.04 one), it just passes fine,
+ without the appropriate fix. I then thought about writing a selftest
+ for that, it's more reliable. I left the gdb.base/frame-view.exp pretty
+ printer test there, it's already written, and we never know, it might
+ catch some unrelated issue some day.
+
+ Change-Id: I5849baf77991fc67a15bfce4b5e865a97265b386
+ Reviewed-By: Bruno Larsen <blarsen@redhat.com>
+
+2023-01-20 Simon Marchi <simon.marchi@efficios.com>
+
+ gdb: make it possible to restore selected user-created frames
+ I would like to improve frame_info_ptr to automatically grab the
+ information needed to reinflate a frame, and automatically reinflate it
+ as needed. One thing that is in the way is the fact that some frames
+ can be created out of thin air by the create_new_frame function. These
+ frames are not the fruit of unwinding from the target's current frame.
+ These frames are created by the "select-frame view" command.
+
+ These frames are not correctly handled by the frame save/restore
+ functions, save_selected_frame, restore_selected_frame and
+ lookup_selected_frame. This can be observed here, using the test
+ included in this patch:
+
+ $ ./gdb --data-directory=data-directory -nx -q testsuite/outputs/gdb.base/frame-view/frame-view
+ Reading symbols from testsuite/outputs/gdb.base/frame-view/frame-view...
+ (gdb) break thread_func
+ Breakpoint 1 at 0x11a2: file /home/simark/src/binutils-gdb/gdb/testsuite/gdb.base/frame-view.c, line 42.
+ (gdb) run
+ Starting program: /home/simark/build/binutils-gdb/gdb/testsuite/outputs/gdb.base/frame-view/frame-view
+
+ [Thread debugging using libthread_db enabled]
+ Using host libthread_db library "/usr/lib/../lib/libthread_db.so.1".
+ [New Thread 0x7ffff7cc46c0 (LWP 4171134)]
+ [Switching to Thread 0x7ffff7cc46c0 (LWP 4171134)]
+
+ Thread 2 "frame-view" hit Breakpoint 1, thread_func (p=0x0) at /home/simark/src/binutils-gdb/gdb/testsuite/gdb.base/frame-view.c:42
+ 42 foo (11);
+ (gdb) info frame
+ Stack level 0, frame at 0x7ffff7cc3ee0:
+ rip = 0x5555555551a2 in thread_func (/home/simark/src/binutils-gdb/gdb/testsuite/gdb.base/frame-view.c:42); saved rip = 0x7ffff7d4e8fd
+ called by frame at 0x7ffff7cc3f80
+ source language c.
+ Arglist at 0x7ffff7cc3ed0, args: p=0x0
+ Locals at 0x7ffff7cc3ed0, Previous frame's sp is 0x7ffff7cc3ee0
+ Saved registers:
+ rbp at 0x7ffff7cc3ed0, rip at 0x7ffff7cc3ed8
+ (gdb) thread 1
+ [Switching to thread 1 (Thread 0x7ffff7cc5740 (LWP 4171122))]
+ #0 0x00007ffff7d4b4b6 in ?? () from /usr/lib/libc.so.6
+
+ Here, we create a custom frame for thread 1 (using the stack from thread
+ 2, for convenience):
+
+ (gdb) select-frame view 0x7ffff7cc3f80 0x5555555551a2
+
+ The first calls to "frame" looks good:
+
+ (gdb) frame
+ #0 thread_func (p=0x7ffff7d4e630) at /home/simark/src/binutils-gdb/gdb/testsuite/gdb.base/frame-view.c:42
+ 42 foo (11);
+
+ But not the second one:
+
+ (gdb) frame
+ #0 0x00007ffff7d4b4b6 in ?? () from /usr/lib/libc.so.6
+
+ This second "frame" command shows the current target frame instead of
+ the user-created frame.
+
+ It's not totally clear how the "select-frame view" feature is expected
+ to behave, especially since it's not tested. I heard accounts that it
+ used to be possible to select a frame like this and do "up" and "down"
+ to navigate the backtrace starting from that frame. The fact that
+ create_new_frame calls frame_unwind_find_by_frame to install the right
+ unwinder suggest that it used to be possible. But that doesn't work
+ today:
+
+ (gdb) select-frame view 0x7ffff7cc3f80 0x5555555551a2
+ (gdb) up
+ Initial frame selected; you cannot go up.
+ (gdb) down
+ Bottom (innermost) frame selected; you cannot go down.
+
+ and "backtrace" always shows the actual thread's backtrace, it ignores
+ the user-created frame:
+
+ (gdb) bt
+ #0 0x00007ffff7d4b4b6 in ?? () from /usr/lib/libc.so.6
+ #1 0x00007ffff7d50403 in ?? () from /usr/lib/libc.so.6
+ #2 0x000055555555521a in main () at /home/simark/src/binutils-gdb/gdb/testsuite/gdb.base/frame-view.c:56
+
+ I don't want to address all the `select-frame view` issues , but I think
+ we can agree that the "frame" command changing the selected frame, as
+ shown above, is a bug. I would expect that command to show the
+ currently selected frame and not change it.
+
+ This happens because of the scoped_restore_selected_frame object in
+ print_frame_args. The frame information is saved in the constructor
+ (the backtrace below), and restored in the destructor.
+
+ #0 save_selected_frame (frame_id=0x7ffdc0020ad0, frame_level=0x7ffdc0020af0) at /home/simark/src/binutils-gdb/gdb/frame.c:1682
+ #1 0x00005631390242f0 in scoped_restore_selected_frame::scoped_restore_selected_frame (this=0x7ffdc0020ad0) at /home/simark/src/binutils-gdb/gdb/frame.c:324
+ #2 0x000056313993581e in print_frame_args (fp_opts=..., func=0x62100023bde0, frame=..., num=-1, stream=0x60b000000300) at /home/simark/src/binutils-gdb/gdb/stack.c:755
+ #3 0x000056313993ad49 in print_frame (fp_opts=..., frame=..., print_level=1, print_what=SRC_AND_LOC, print_args=1, sal=...) at /home/simark/src/binutils-gdb/gdb/stack.c:1401
+ #4 0x000056313993835d in print_frame_info (fp_opts=..., frame=..., print_level=1, print_what=SRC_AND_LOC, print_args=1, set_current_sal=1) at /home/simark/src/binutils-gdb/gdb/stack.c:1126
+ #5 0x0000563139932e0b in print_stack_frame (frame=..., print_level=1, print_what=SRC_AND_LOC, set_current_sal=1) at /home/simark/src/binutils-gdb/gdb/stack.c:368
+ #6 0x0000563139932bbe in print_stack_frame_to_uiout (uiout=0x611000016840, frame=..., print_level=1, print_what=SRC_AND_LOC, set_current_sal=1) at /home/simark/src/binutils-gdb/gdb/stack.c:346
+ #7 0x0000563139b0641e in print_selected_thread_frame (uiout=0x611000016840, selection=...) at /home/simark/src/binutils-gdb/gdb/thread.c:1993
+ #8 0x0000563139940b7f in frame_command_core (fi=..., ignored=true) at /home/simark/src/binutils-gdb/gdb/stack.c:1871
+ #9 0x000056313994db9e in frame_command_helper<frame_command_core>::base_command (arg=0x0, from_tty=1) at /home/simark/src/binutils-gdb/gdb/stack.c:1976
+
+ Since the user-created frame has level 0 (identified by the saved level
+ -1), lookup_selected_frame just reselects the target's current frame,
+ and the user-created frame is lost.
+
+ My goal here is to fix this particular problem.
+
+ Currently, select_frame does not set selected_frame_id and
+ selected_frame_level for frames with level 0. It leaves them at
+ null_frame_id / -1, indicating to restore_selected_frame to use the
+ target's current frame. User-created frames also have level 0, so add a
+ special case them such that select_frame saves their selected id and
+ level.
+
+ save_selected_frame does not need any change.
+
+ Change the assertion in restore_selected_frame that checks `frame_level
+ != 0` to account for the fact that we can restore user-created frames,
+ which have level 0.
+
+ Finally, change lookup_selected_frame to make it able to re-create
+ user-created frame_info objects from selected_frame_level and
+ selected_frame_id.
+
+ Add a minimal test case for the case described above, that is the
+ "select-frame view" command followed by the "frame" command twice. In
+ order to have a known stack frame to switch to, the test spawns a second
+ thread, and tells the first thread to use the other thread's top frame.
+
+ Change-Id: Ifc77848dc465fbd21324b9d44670833e09fe98c7
+ Reviewed-By: Bruno Larsen <blarsen@redhat.com>
+
+2023-01-20 Simon Marchi <simon.marchi@polymtl.ca>
+
+ gdb: add create_new_frame(frame_id) overload
+ The subsequent patches will need to call create_new_frame with an
+ existing frame_id representing a user created frame. They could call
+ the existing create_new_frame, passing both addresses, but it seems
+ nicer to have a version of the function that takes a frame_id directly.
+
+ Change-Id: If31025314fec0c3e644703e4391a5ef8079e1a32
+ Reviewed-By: Bruno Larsen <blarsen@redhat.com>
+
+2023-01-20 Simon Marchi <simon.marchi@polymtl.ca>
+
+ gdb: add user-created frames to stash
+ A subsequent patch makes it possible for frame_info_ptr to reinflate
+ user-created frames. If two frame_info_ptr objects wrapping the same
+ user-created frame_info need to do reinflation, we want them to end up
+ pointing to the same frame_info instance, and not create two separate
+ frame_infos. Otherwise, GDB gets confused down the line, as the state
+ kept in one frame_info object starts differing from the other
+ frame_info.
+
+ Achieve this by making create_new_frame place the user-created frames in
+ the frame stash. This way, when the second frame_info_ptr does
+ reinflation, it will find the existing frame_info object, created by the
+ other frame_info_ptr, in the frame stash.
+
+ To make the frame stash differentiate between regular and user-created
+ frame infos which would otherwise be equal, change frame_addr_hash and
+ frame_id::operator== to account for frame_id::user_created_p.
+
+ I made create_new_frame look up existing frames in the stash, and only
+ create one if it doesn't find one. The goal is to avoid the
+ "select-frame view"/"info frame view"/"frame view" commands from
+ overriding existing entries into the stash, should the user specify the
+ same frame more than once. This will also help in the subsequent patch
+ that makes frame_info_ptr capable of reinflating user-created frames.
+ It will be able to just call create_new_frame and it will do the right
+ thing.
+
+ Change-Id: I14ba5799012056c007b4992ecb5c7adafd0c2404
+ Reviewed-By: Bruno Larsen <blarsen@redhat.com>
+
+2023-01-20 Simon Marchi <simon.marchi@polymtl.ca>
+
+ gdb: add frame_id::user_created_p
+ Later in this series, we'll need to differentiate frame ids for regular
+ frames (obtained from the target state and unwinding from it) vs frame
+ ids for user-created frames (created with create_new_frame). Add the
+ frame_id::user_created_p field to indicate a frame is user-created, and
+ set it in create_new_frame.
+
+ The field is otherwise not used yet, so not changes in behavior are
+ expected.
+
+ Change-Id: I60de3ce581ed01bf0fddb30dff9bd932840120c3
+ Reviewed-By: Bruno Larsen <blarsen@redhat.com>
+
+2023-01-20 Simon Marchi <simon.marchi@polymtl.ca>
+
+ gdb: move frame_info_ptr to frame.{c,h}
+ A patch later in this series will make frame_info_ptr access some
+ fields internal to frame_info, which we don't want to expose outside of
+ frame.c. Move the frame_info_ptr class to frame.h, and the definitions
+ to frame.c. Remove frame-info.c and frame-info.h.
+
+ Change-Id: Ic5949759e6262ea0da6123858702d48fe5673fea
+ Reviewed-By: Bruno Larsen <blarsen@redhat.com>
+
+2023-01-20 Simon Marchi <simon.marchi@efficios.com>
+
+ gdb: move call site types to call-site.h
+ I hesitated between putting the file in the dwarf2 directory (as
+ gdb/dwarf2/call-site.h) or in the common directory (as gdb/call-site.h).
+ The concept of call site is not DWARF-specific, another debug info
+ reader could provide this information. But as it is, the implementation
+ is a bit DWARF-specific, as one form it can take is a DWARF expression
+ and parameters can be defined using a DWARF register number. So I ended up
+ choosing to put it under dwarf2/. If another debug info reader ever
+ wants to provide call site information, we can introduce a layer of
+ abstraction between the "common" call site and the "dwarf2" call site.
+
+ The copyright start year comes from the date `struct call_site` was
+ introduced.
+
+ Change-Id: I1cd84aa581fbbf729edc91b20f7d7a6e0377014d
+ Reviewed-By: Bruno Larsen <blarsen@redhat.com>
+
+2023-01-20 Simon Marchi <simon.marchi@efficios.com>
+
+ gdb: move sect_offset and cu_offset to dwarf2/types.h
+ I want to move the call_site stuff out of gdbtypes.h, to a new header
+ file, to break some cyclic include problem. The call_site stuff uses
+ cu_offset, also defined in gdbtypes.h, so cu_offset also needs to move
+ somewhere else (otherwise, call-site.h will need to include gdbtypes.h,
+ and we are back to square 1). I could move cu_offset to the future new
+ file dwarf2/call-site.h, but it doesn't sound like a good place for it,
+ at cu_offset is not specific to call sites, it's used throughout
+ dwarf2/. So, move it to its own file, dwarf2/types.h. For now,
+ gdbtypes.h includes dwarf2/types.h, but that will be removed once the
+ call site stuff is moved to its own file.
+
+ Move sect_offset with it too. sect_offset is not a DWARF-specific
+ concept, but for the moment it is only used in dwarf2/.
+
+ Change-Id: I1fd2a3b7b67dee789c4874244b044bde7db43d8e
+ Reviewed-By: Bruno Larsen <blarsen@redhat.com>
+
+2023-01-20 Simon Marchi <simon.marchi@efficios.com>
+
+ gdb: remove language.h include from frame.h
+ This helps resolve some cyclic include problem later in the series.
+ The only language-related thing frame.h needs is enum language, and that
+ is in defs.h.
+
+ Doing so reveals that a bunch of files were relying on frame.h to
+ include language.h, so fix the fallouts here and there.
+
+ Change-Id: I178a7efec1953c2d088adb58483bade1f349b705
+ Reviewed-By: Bruno Larsen <blarsen@redhat.com>
+
+2023-01-20 Simon Marchi <simon.marchi@efficios.com>
+
+ gdb: move compile_instance to compile/compile.h
+ struct compile_instance needs to be visible to users, since we use
+ std::unique<compile_instance>. language.c and c-lang.c currently
+ includes compile-internal.h for this reason, which kind of defeats the
+ purpose of having an "internal" header file.
+
+ Change-Id: Iedffe5f1173b3de7bdc1be533ee2a68e6f6c549f
+ Reviewed-By: Bruno Larsen <blarsen@redhat.com>
+
+2023-01-20 Simon Marchi <simon.marchi@efficios.com>
+
+ gdb: move type_map_instance to compile/compile.c
+ It's only used in compile/compile.c, it doesn't need to be in a header.
+
+ Change-Id: Ic5bec996b7b0cd7130055d1e8ff238b5ac4292a3
+ Reviewed-By: Bruno Larsen <blarsen@redhat.com>
+
+2023-01-20 Indu Bhagat <indu.bhagat@oracle.com>
+
+ Upload SFrame spec files as well
+ binutils/
+ * README-how-to-make-a-release: Include sframe-spec html and pdf
+ files.
+
+2023-01-20 Tom Tromey <tom@tromey.com>
+
+ Use bool in pc_in_* functions
+ I noticed that pc_in_unmapped_range had a weird return type -- it was
+ returning a CORE_ADDR but intending to return a bool. This patch
+ changes all the pc_in_* functions to return bool instead.
+
+2023-01-20 Tom Tromey <tromey@adacore.com>
+
+ Constify notif_client
+ It seems to me that a notif_client is read-only, so this patch changes
+ the code to use "const" everywhere.
+
+2023-01-20 Simon Marchi <simon.marchi@polymtl.ca>
+
+ gdb: remove struct trad_frame forward declaration
+ I found this forward declaration for a struct that doesn't exist, remove
+ it.
+
+ Change-Id: Ib9473435a949452160598035e5e0fe19fcdc4d20
+
+2023-01-20 Tom Tromey <tromey@adacore.com>
+
+ Make gdb.ada/ptype_tagged_param.exp pass
+ gdb.ada/ptype_tagged_param.exp is failing for me on x86-64 Fedora 36.
+ However, it's actually generating the correct output -- it is just
+ that the test thinks that the "ptype" will not work because I do not
+ have the GNAT debuginfo installed.
+
+ This patch changes the code to accept either result, and then to issue
+ a kfail as appropriate.
+
+2023-01-20 Simon Marchi <simon.marchi@polymtl.ca>
+
+ gdb/dwarf: fix UBsan crash in read_subrange_type
+ When running gdb.ada/arrayptr.exp (and others) on Ubuntu 22.04, with the
+ `gnat-11` package installed (not `gnat`), with UBSan activated, I get:
+
+ (gdb) break foo.adb:40
+ /home/smarchi/src/binutils-gdb/gdb/dwarf2/read.c:17689:20: runtime error: shift exponent 127 is too large for 64-bit type 'long unsigned int'
+
+ The problematic DIEs are:
+
+ 0x00001460: DW_TAG_subrange_type
+ DW_AT_lower_bound [DW_FORM_data1] (0x00)
+ DW_AT_upper_bound [DW_FORM_data16] (ffffffffffffffff3f00000000000000)
+ DW_AT_name [DW_FORM_strp] ("foo__packed_array___XP7___XDLU_0__1180591620717411303423")
+ DW_AT_type [DW_FORM_ref4] (0x0000153f "long_long_long_unsigned")
+ DW_AT_GNAT_descriptive_type [DW_FORM_ref4] (0x0000147e)
+ DW_AT_artificial [DW_FORM_flag_present] (true)
+
+ 0x0000153f: DW_TAG_base_type
+ DW_AT_byte_size [DW_FORM_data1] (0x10)
+ DW_AT_encoding [DW_FORM_data1] (DW_ATE_unsigned)
+ DW_AT_name [DW_FORM_strp] ("long_long_long_unsigned")
+ DW_AT_artificial [DW_FORM_flag_present] (true)
+
+ When processed by this code:
+
+ negative_mask =
+ -((ULONGEST) 1 << (base_type->length () * TARGET_CHAR_BIT - 1));
+ if (low.kind () == PROP_CONST
+ && !base_type->is_unsigned () && (low.const_val () & negative_mask))
+ low.set_const_val (low.const_val () | negative_mask);
+
+ When the base type's length (16 bytes in this case) is larger than a
+ ULONGEST (typically 8 bytes), the bit shift is too large.
+
+ My obvious fix is just to skip the fixup for base types larger than a
+ ULONGEST (8 bytes). I don't think we really handle constant attribute
+ values larger than 8 bytes anyway, so this is part of a much larger
+ problem.
+
+ Add a test that replicates this situation, but uses bounds that fit in a
+ signed 64 bit, so we get a sensible result.
+
+ Change-Id: I8d0a24f3edd83b44e0761a0ce38922d3e2e112fb
+ Bug: https://sourceware.org/bugzilla/show_bug.cgi?id=29386
+
+2023-01-20 Simon Marchi <simon.marchi@polymtl.ca>
+
+ gdb/testsuite: add test for negative subrange bounds with unsigned form
+ I am looking at this code [1]:
+
+ /* Normally, the DWARF producers are expected to use a signed
+ constant form (Eg. DW_FORM_sdata) to express negative bounds.
+ But this is unfortunately not always the case, as witnessed
+ with GCC, for instance, where the ambiguous DW_FORM_dataN form
+ is used instead. To work around that ambiguity, we treat
+ the bounds as signed, and thus sign-extend their values, when
+ the base type is signed. */
+ negative_mask =
+ -((ULONGEST) 1 << (base_type->length () * TARGET_CHAR_BIT - 1));
+ if (low.kind () == PROP_CONST
+ && !base_type->is_unsigned () && (low.const_val () & negative_mask))
+ low.set_const_val (low.const_val () | negative_mask);
+ if (high.kind () == PROP_CONST
+ && !base_type->is_unsigned () && (high.const_val () & negative_mask))
+ high.set_const_val (high.const_val () | negative_mask);
+
+ Nothing in the testsuite seems to exercise it, as when I remove it, all
+ of gdb.dwarf2 still passes. And tests in other directories would be
+ compiler-dependent, so would rely on having a buggy compiler.
+
+ Update gdb.dwarf2/subrange.exp to have a test for it. When removing the
+ code above, the new test fails with:
+
+ ptype array_with_buggy_negative_bounds_type^M
+ type = array [240..244] of signed_byte^M
+ (gdb) FAIL: gdb.dwarf2/subrange.exp: ptype array_with_buggy_negative_bounds_type
+
+ instead of the expected:
+
+ ptype array_with_buggy_negative_bounds_type^M
+ type = array [-16..-12] of signed_byte^M
+ (gdb) PASS: gdb.dwarf2/subrange.exp: ptype array_with_buggy_negative_bounds_type
+
+ [1] https://gitlab.com/gnutools/binutils-gdb/-/blob/5ea14aa4e53fa37f4ba4517497ed2c1e4c60dee2/gdb/dwarf2/read.c#L17681-17695
+
+ Change-Id: I1992a3ff0cb1e90fa8a9114dae6c591792f059c2
+
+2023-01-20 Michael Matz <matz@suse.de>
+
+ Add testcase ld-elf/merge4
+ to check a situation that once failed with the new section merging
+ when it mishandled offsets pointing into alignment padding in mergable
+ string sections (i.e. pointing to zeros). It made bootstrap.exp fail
+ but that depends on many factors to actually go wrong so this is a more
+ explicit variant of it.
+
+2023-01-20 Michael Matz <matz@suse.de>
+
+ arm32: Fix rodata-merge-map
+ the test expects a second, but useless, $d mapping symbol for
+ the partially merged section, and specifically disallows one
+ for the completely merged section. The new merging algorithm
+ makes it so that also the partially merged sections are conceptually
+ SEC_EXCLUDED, except the first merge section (e.g. as if the very
+ first object file already contains all strings). So that second mapping
+ symbol is now missing. It never was needed anyway.
+
+ So, adjust the test.
+
+2023-01-20 Michael Matz <matz@suse.de>
+
+ Faster string merging
+ * use power-of-two hash table
+ * use better hash function (hashing 32bits at once and with better
+ mixing characteristics)
+ * use input-offset-to-entry maps instead of retaining full input
+ contents for lookup time
+ * don't reread SEC_MERGE section multiple times
+ * care for cache behaviour for the hot lookup routine
+
+ The overall effect is less usage in libz and much faster string merging
+ itself. On a debug-info-enabled cc1 the effect at the time of this
+ writing on the machine I used was going from 14400 perf samples to 9300
+ perf samples or from 3.7 seconds to 2.4 seconds, i.e. about 33% .
+
+2023-01-20 Frederic Cambus <fred@statdns.com>
+
+ Add OpenBSD ARM GAS support.
+
+2023-01-20 Jan Beulich <jbeulich@suse.com>
+
+ x86: split i386-gen's opcode hash entry struct
+ All glibc malloc() implementations I've checked have a smallest
+ allocation size worth of 3 pointers, with an increment worth of 2
+ pointers. Hence mnemonics with multiple templates can be stored more
+ efficiently when maintaining the shared "name" field only in the actual
+ hash entry. (To express the shared nature, also convert "name" to by
+ pointer-to-const.)
+
+ While doing the conversation also pull out common code from the involved
+ if/else construct in expand_templates().
+
+2023-01-20 Jan Beulich <jbeulich@suse.com>
+
+ x86: embed register and alike names in disassembler
+ Register names are (including their nul terminators) on average almost 4
+ bytes long. Otoh no register name is longer than 8 bytes. Hence even for
+ 32-bit builds using a pointer is only slightly more space efficient than
+ embedding the strings. A level of indirection can be also avoided by
+ embedding the names as an array of 8 characters directly in the arrays,
+ and the number of base relocations in libopcodes.so (or PIE builds of
+ statically linked executables) goes down as well.
+
+ To amortize for the otherwise reduced folding of string literals by the
+ linker, use att_names_seg[] in place of string literals in append_seg()
+ and OP_ESreg().
+
+2023-01-20 Jan Beulich <jbeulich@suse.com>
+
+ x86: embed register names in reg_entry
+ Register names are (including their nul terminators) on average almost 4
+ bytes long. Otoh no register name is longer than 7 bytes. Hence even for
+ 32-bit builds using a pointer is only slightly more space efficient than
+ embedding the strings. A level of indirection can be also avoided by
+ embedding the names as an array of 8 characters directly in the struct,
+ and the number of base relocations in PIE builds of gas goes down as
+ well.
+
+ x86: avoid strcmp() in a few places
+ Now that we have identifiers for the mnemonic strings we can avoid
+ strcmp() in a number of places, comparing the offsets into the mnemonic
+ string table instead. While doing this also
+ - convert a leftover strncmp() to startswith() (apparently an oversight
+ when rebasing the original patch introducing the startswith() uses),
+ - use the new shorthand for current_templates->start also elsewhere in
+ md_assemble() (valid up to the point where match_template() is
+ called).
+
+ x86: absorb allocation in i386-gen
+ When generating the mnemonic string table we already set up an
+ identifier for the following entry in a number of cases. Re-use that on
+ the next loop iteration rather than re-doing allocation and conversion.
+
+ x86: re-use insn mnemonic strings as much as possible
+ Compact the mnemonic string table such that the tails of longer
+ mnemonics are re-used for shorter ones, going beyond what compilers
+ would typically do, but matching what ELF linkers may do when processing
+ SHF_MERGE|SHF_STRINGS sections. This reduces table size by about 12.5%.
+
+2023-01-20 Jan Beulich <jbeulich@suse.com>
+
+ x86: move insn mnemonics to a separate table
+ Using full pointers to reference the insn mnemonic strings is not very
+ efficient. With overall string size presently just slightly over 20k,
+ even a 16-bit value would suffice. Use "unsigned int" for now, as
+ there's no good use we could presently make of the otherwise saved 16
+ bits.
+
+ For 64-bit builds this reduces table size by 6.25% (prior to the recent
+ ISA extension additions it would have been 12.5%), with a similar effect
+ on cache occupation of table entries accessed. For PIE builds of gas
+ this also reduces the number of base relocations quite a bit (obviously
+ independent of bitness).
+
+2023-01-20 Jan Beulich <jbeulich@suse.com>
+
+ x86: abstract out obtaining of a template's mnemonic
+ In preparation for changing the representation of the "name" field
+ introduce a wrapper function. This keeps the mechanical change separate
+ from the functional one.
+
+2023-01-20 GDB Administrator <gdbadmin@sourceware.org>
+
+ Automatic date update in version.in
+
+2023-01-19 Tom Tromey <tromey@adacore.com>
+
+ Use "maint ignore-probes" in no-libstdcxx-probe.exp
+ While looking at some test output, I saw that no-libstdcxx-probe.exp
+ was not being run. However, it occurred to me that Tom de Vries' new
+ "maint ignore-probes" command could be used to enable this test
+ unconditionally.
+
+ Reviewed-by: Tom de Vries <tdevries@suse.de>
+
+2023-01-19 Rainer Orth <ro@CeBiTec.Uni-Bielefeld.DE>
+
+ i386: Don't emit unsupported TLS relocs on Solaris
+ Emit R_386_TLS_LE and R_386_TLS_IE, instead of R_386_TLS_LE_32 and
+ R_386_TLS_IE_32, on Solaris.
+
+ PR ld/13671
+ * elf32-i386.c (elf_i386_tls_transition): Only emit R_386_TLS_LE,
+ R_386_TLS_IE on Solaris.
+ (elf_i386_relocate_section): Only use R_386_TLS_GD->R_386_TLS_LE
+ transition on Solaris.
+
+ Co-Authored-By: H.J. Lu <hjl.tools@gmail.com>
+
+2023-01-19 Andrew Burgess <andrew.burgess@embecosm.com>
+
+ GDB/testsuite: Expand for character string limiting options
+ Modify test cases that verify the operation of the array element limit
+ with character strings such that they are executed twice, once with the
+ `set print characters' option set to `elements' and the limit controlled
+ with the `set print elements' option, and then again with the limit
+ controlled with the `set print characters' option instead. Similarly
+ with the `-elements' and `-characters' options for the `print' command.
+ Additionally verify that said `print' command options combined yield the
+ expected result.
+
+ Verify correct $_gdb_setting and $_gdb_setting_str values for the `print
+ characters' setting, in particular the `void' value for the `elements'
+ default, which has no corresponding integer value exposed.
+
+ Add Guile and Python coverage for the `print characters' GDB setting.
+
+ There are new tests for Ada and Pascal, as the string printing code for
+ these languages is different than the generic string printing code used
+ by other languages. Modula2 also has different string printing code,
+ but (a) this is similar to Pascal, and (b) there are no existing modula2
+ tests written in Modula2, so I'm not sure how I'd even test the Modula2
+ string printing.
+
+ Co-Authored-By: Maciej W. Rozycki <macro@embecosm.com>
+ Approved-By: Simon Marchi <simon.marchi@efficios.com>
+
+2023-01-19 Andrew Burgess <andrew.burgess@embecosm.com>
+
+ GDB: Add a character string limiting option
+ This commit splits the `set/show print elements' option into two. We
+ retain `set/show print elements' for controlling how many elements of an
+ array we print, but a new `set/show print characters' setting is added
+ which is used for controlling how many characters of a string are
+ printed.
+
+ The motivation behind this change is to allow users a finer level of
+ control over how data is printed, reflecting that, although strings can
+ be thought of as arrays of characters, users often want to treat these
+ two things differently.
+
+ For compatibility reasons by default the `set/show print characters'
+ option is set to `elements', which makes the limit for character strings
+ follow the setting of the `set/show print elements' option, as it used
+ to. Using `set print characters' with any other value makes the limit
+ independent from the `set/show print elements' setting, however it can
+ be restored to the default with the `set print characters elements'
+ command at any time.
+
+ A corresponding `-characters' option for the `print' command is added,
+ with the same semantics, i.e. one can use `elements' to make a given
+ `print' invocation follow the limit of elements, be it set with the
+ `-elements' option also given with the same invocation or taken from the
+ `set/show print elements' setting, for characters as well regardless of
+ the current setting of the `set/show print characters' option.
+
+ The GDB changes are all pretty straightforward, just changing references
+ to the old 'print_max' to use a new `get_print_max_chars' helper which
+ figures out which of the two of `print_max' and `print_max_chars' values
+ to use.
+
+ Likewise, the documentation is just updated to reference the new setting
+ where appropriate.
+
+ To make people's life easier the message shown by `show print elements'
+ now indicates if the setting also applies to character strings:
+
+ (gdb) set print characters elements
+ (gdb) show print elements
+ Limit on string chars or array elements to print is 200.
+ (gdb) set print characters unlimited
+ (gdb) show print elements
+ Limit on array elements to print is 200.
+ (gdb)
+
+ and the help text shows the dependency as well:
+
+ (gdb) help set print elements
+ Set limit on array elements to print.
+ "unlimited" causes there to be no limit.
+ This setting also applies to string chars when "print characters"
+ is set to "elements".
+ (gdb)
+
+ In the testsuite there are two minor updates, one to add `-characters'
+ to the list of completions now shown for the `print' command, and a bare
+ minimum pair of checks for the right handling of `set print characters'
+ and `show print characters', copied from the corresponding checks for
+ `set print elements' and `show print elements' respectively.
+
+ Co-Authored-By: Maciej W. Rozycki <macro@embecosm.com>
+ Approved-By: Simon Marchi <simon.marchi@efficios.com>
+
+2023-01-19 Maciej W. Rozycki <macro@embecosm.com>
+
+ GDB: Allow arbitrary keywords in integer set commands
+ Rather than just `unlimited' allow the integer set commands (or command
+ options) to define arbitrary keywords for the user to use, removing
+ hardcoded arrangements for the `unlimited' keyword.
+
+ Remove the confusingly named `var_zinteger', `var_zuinteger' and
+ `var_zuinteger_unlimited' `set'/`show' command variable types redefining
+ them in terms of `var_uinteger', `var_integer' and `var_pinteger', which
+ have the range of [0;UINT_MAX], [INT_MIN;INT_MAX], and [0;INT_MAX] each.
+
+ Following existing practice `var_pinteger' allows extra negative values
+ to be used, however unlike `var_zuinteger_unlimited' any number of such
+ values can be defined rather than just `-1'.
+
+ The "p" in `var_pinteger' stands for "positive", for the lack of a more
+ appropriate unambiguous letter, even though 0 obviously is not positive;
+ "n" would be confusing as to whether it stands for "non-negative" or
+ "negative".
+
+ Add a new structure, `literal_def', the entries of which define extra
+ keywords allowed for a command and numerical values they correspond to.
+ Those values are not verified against the basic range supported by the
+ underlying variable type, allowing extra values to be allowed outside
+ that range, which may or may not be individually made visible to the
+ user. An optional value translation is possible with the structure to
+ follow the existing practice for some commands where user-entered 0 is
+ internally translated to UINT_MAX or INT_MAX. Such translation can now
+ be arbitrary. Literals defined by this structure are automatically used
+ for completion as necessary.
+
+ So for example:
+
+ const literal_def integer_unlimited_literals[] =
+ {
+ { "unlimited", INT_MAX, 0 },
+ { nullptr }
+ };
+
+ defines an extra `unlimited' keyword and a user-visible 0 value, both of
+ which get translated to INT_MAX for the setting to be used with.
+
+ Similarly:
+
+ const literal_def zuinteger_unlimited_literals[] =
+ {
+ { "unlimited", -1, -1 },
+ { nullptr }
+ };
+
+ defines the same keyword and a corresponding user-visible -1 value that
+ is used for the requested setting. If the last member were omitted (or
+ set to `{}') here, then only the keyword would be allowed for the user
+ to enter and while -1 would still be used internally trying to enter it
+ as a part of a command would result in an "integer -1 out of range"
+ error.
+
+ Use said error message in all cases (citing the invalid value requested)
+ replacing "only -1 is allowed to set as unlimited" previously used for
+ `var_zuinteger_unlimited' settings only rather than propagating it to
+ `var_pinteger' type. It could only be used for the specific case where
+ a single extra `unlimited' keyword was defined standing for -1 and the
+ use of numeric equivalents is discouraged anyway as it is for historical
+ reasons only that they expose GDB internals, confusingly different
+ across variable types. Similarly update the "must be >= -1" Guile error
+ message.
+
+ Redefine Guile and Python parameter types in terms of the new variable
+ types and interpret extra keywords as Scheme keywords and Python strings
+ used to communicate corresponding parameter values. Do not add a new
+ PARAM_INTEGER Guile parameter type, however do handle the `var_integer'
+ variable type now, permitting existing parameters defined by GDB proper,
+ such as `listsize', to be accessed from Scheme code.
+
+ With these changes in place it should be trivial for a Scheme or Python
+ programmer to expand the syntax of the `make-parameter' command and the
+ `gdb.Parameter' class initializer to have arbitrary extra literals along
+ with their internal representation supplied.
+
+ Update the testsuite accordingly.
+
+ Approved-By: Simon Marchi <simon.marchi@efficios.com>
+
+2023-01-19 Indu Bhagat <indu.bhagat@oracle.com>
+
+ libsframe: Use AM_SILENT_RULES macro in configure.ac
+ Silence 'make' by default.
+
+ libsframe/
+ * configure.ac: Use AM_SILENT_RULES.
+ * configure: Regenerate.
+
+2023-01-19 Tom Tromey <tom@tromey.com>
+
+ Remove some unused includes
+ I noticed a few spots that include gnu-stabs.h but that do not need
+ to. This patch removes these unnecessary includes. Tested by
+ rebuilding.
+
+2023-01-19 Tom de Vries <tdevries@space.suse.cz>
+
+ [gdb/tdep, aarch64] Remove fp and sp reg aliases, add x31 reg alias
+ In aarch64-tdep.c we find these register aliases:
+ ...
+ {
+ /* 64-bit register names. */
+ {"fp", AARCH64_FP_REGNUM},
+ {"lr", AARCH64_LR_REGNUM},
+ {"sp", AARCH64_SP_REGNUM},
+ ...
+
+ The sp alias is superfluous, because the canonical name of x31 is already sp.
+
+ The fp alias is superfluous, because it's already taken by the default meaning
+ of fp, assigned here in _initialize_frame_reg:
+ ...
+ user_reg_add_builtin ("fp", value_of_builtin_frame_fp_reg, NULL);
+ ...
+
+ Fix this by removing the fp and sp aliases.
+
+ While we're at it, add an x31 alias for sp.
+
+ Approved-By: Luis Machado <luis.machado@arm.com>
+
+ Tested on aarch64-linux.
+ PR tdep/30012
+ Bug: https://sourceware.org/bugzilla/show_bug.cgi?id=30012
+
+2023-01-19 Tom de Vries <tdevries@suse.de>
+
+ [gdb/testsuite] Fix gdb.python/py-value-cc.exp for big endian
+ On s390x-linux, I run into:
+ ...
+ (gdb) python print(u[u_fields[0]])^M
+ 99^M
+ (gdb) PASS: gdb.python/py-value-cc.exp: u's first field via field
+ python print(u[u_fields[1]])^M
+ 0 '\000'^M
+ (gdb) FAIL: gdb.python/py-value-cc.exp: u's second field via field
+ ...
+
+ There's a var u of this type:
+ ...
+ union U {
+ int a;
+ char c;
+ };
+ ...
+ and after assigning 99 to u.a, the test-case expects u.c to contain 99 (which
+ it does on x86_64), but instead it contains 0.
+
+ Fix this by instead assigning 0x63636363, to ensure that u.c == 99 for both
+ little and big endian.
+
+ Tested on x86_64-linux and s390x-linux.
+
+2023-01-19 Alan Modra <amodra@gmail.com>
+
+ Reinitialise macro_nest
+ * input-scrub.c (input_scrub_begin): Init macro_nest.
+
+2023-01-19 Alan Modra <amodra@gmail.com>
+
+ PR 30022, concurrent builds can fail
+ So let's not copy .libs/libbfd.a to libbfd.a now that nothing in the
+ binutils-gdb source tries to link against it.
+
+ PR 30022
+ * Makefile.am (noinst_LIBRARIES, libbfd_a_SOURCES, stamp-lib),
+ (libbfd.a): Delete rules.
+ (CLEANFILES): Adjust to suit.
+
+2023-01-19 Indu Bhagat <indu.bhagat@oracle.com>
+
+ toplevel: Makefile.def: add install-strip dependency on libsframe
+ As noted in PR libsframe/30014 - FTBFS: install-strip fails because
+ bfdlib relinks and fails to find libsframe, the install time
+ dependencies of libbfd need to be updated.
+
+ PR libsframe/30014
+ * Makefile.def: Reflect that libsframe needs to installed before
+ libbfd. Reorder a bit to better track libsframe dependencies.
+ * Makefile.in: Regenerate.
+
+2023-01-19 Alan Modra <amodra@gmail.com>
+
+ The fuzzers have found the reloc special functions in coff-aarch64.c
+ All of them need a bfd_reloc_offset_in_range check before accessing
+ data + reloc_entry->address. This patch adds the missing checks and
+ sanity checks reloc offsets in coff_pe_aarch64_relocate_section too.
+
+ All of them also need changing to support objdump -W calls to
+ bfd_simple_get_relocated_section_contents. At least, secrel_reloc
+ needs the support, the others might not be present in dwarf debug
+ sections.
+
+ * coff-aarch64.c (coff_aarch64_rel21_reloc): Range check
+ reloc offset. Support final-linking.
+ (coff_aarch64_po12l_reloc): Likewise.
+ (coff_aarch64_addr32nb_reloc): Likewise.
+ (coff_aarch64_secrel_reloc): Likewise.
+ (coff_pe_aarch64_relocate_section): Range check reloc offset.
+
+2023-01-19 Alan Modra <amodra@gmail.com>
+
+ Correct coff-aarch64 howtos and delete unnecessary special functions
+ The remaining special functions are still broken except when called
+ by gas bfd_install_relocation.
+
+ * coff-aarch64.c (coff_aarch64_addr64_reloc),
+ (coff_aarch64_addr32_reloc, coff_aarch64_branch26_reloc),
+ (coff_aarch64_branch19_reloc, coff_aarch64_branch14_reloc),
+ (coff_aarch64_po12a_reloc): Delete.
+ (HOWTO_INSTALL_ADDEND): Define as 1.
+ (HOW): Remove pcrel_off. Correct all the howtos.
+ (CALC_ADDEND): Define.
+ (coff_aarch64_rtype_to_howto): New function.
+ (coff_rtype_to_howto): Define.
+
+2023-01-19 Alan Modra <amodra@gmail.com>
+
+ coff-aarch64.c howtos
+ This is just a patch to fix overlong lines. Wrapping the HOWTO macro
+ in a new HOW macro helps in this. No functional changes here.
+
+ * coff-aarch64.c (HOW): Define and use for reloc howtos.
+
+2023-01-19 Alan Modra <amodra@gmail.com>
+
+ howto install_addend
+ This adds a new flag to the reloc howtos that can be used to
+ incrementally change targets over to simple bfd_install_relocation
+ that just installs the addend without any weird adjustments.
+ I've made a few other changes to bfd_install_relocation, removing dead
+ code and comments that are really only applicable to
+ bfd_perform_relocation.
+
+ There is also a reloc offset bounds check change. I've moved the
+ check to where data is accessed, as it seems reasonable to me to not
+ perform the check unless it is needed. There is precedence for this;
+ Relocations against absolute symbols already avoided the check.
+
+ I also tried always performing the reloc offset check, and ran into
+ testsuite failures due to _NONE and _ALIGN relocs at the end of
+ sections. These likely would be fixed if all such reloc howtos had
+ size set to zero, but I would rather not edit lots of files when it
+ involves checking that target code does not use the size.
+
+ * reloc.c (struct reloc_howto_struct): Add install_addend.
+ (HOWTO_INSTALL_ADDEND): Define.
+ (HOWTO): Init new field with HOWTO_INSTALL_ADDEND.
+ (bfd_install_relocation): Remove comments copied from
+ bfd_perform_relocation that aren't applicable here. Remove
+ code dealing with output_offset and output_section. Just set
+ relocation to addend if install_addend. Move reloc offset
+ bounds check to just before section data is accessed, avoiding
+ the check when data is not accessed.
+ * bfd-in2.h: Regenerate.
+
+2023-01-19 Mike Frysinger <vapier@gentoo.org>
+
+ sim: info: convert verbose field to a bool
+ The verbose argument has always been an int treated as a bool, so
+ convert it to an explicit bool. Further, update the API docs to
+ match the reality that the verbose value is actually used by some
+ of the internal modules.
+
+ sim: unify sim-signal.o building
+ Now that sim-main.h has been reduced significantly, we can remove it
+ from sim-signal.c and unify it across all boards since it compiles to
+ the same code.
+
+ sim: v850: reduce extra header inclusion to igen files
+ Limit these extra header includes to only when specific igen files
+ include us until we can move the includes to the igen fils directly.
+
+ sim: v850: drop redundant define
+ This is already in v850/local.mk, so we can drop it from sim-main.h.
+
+2023-01-19 Mark Wielaard <mark@klomp.org>
+
+ sim: mn10300: minimize mn10300-sim.h include in sim-main.h
+ sim-main.h is special since it is one of the files automatically
+ included in igen generated files. But this means anything including
+ sim-main.h might get everything included just for the igen files.
+
+ To prevent clashing symbols/defines only include sim-fpu.h,
+ sim-signal.h, mn10300-sim.h from sim-main.h if it is included
+ from one of the generated igen C files. Add explicit includes
+ of mn10300-sim.h, sim-fpu.h and/or sim-signal.h to dv-mn103cpu.c,
+ interp.c and op_utils.c.
+
+2023-01-19 GDB Administrator <gdbadmin@sourceware.org>
+
+ Automatic date update in version.in
+
+2023-01-18 Maciej W. Rozycki <macro@embecosm.com>
+
+ GDB: Add references to erased args in cli-decode.c
+ Complement commit 1d7fe7f01b93 ("gdb: Introduce setting construct within
+ cmd_list_element") and commit 702991711a91 ("gdb: Have setter and getter
+ callbacks for settings") and update inline documentation accordingly for
+ `add_set_or_show_cmd' and `add_setshow_cmd_full_erased', documenting the
+ `args' parameter and removing references to `var', `set_setting_func'
+ and `get_setting_func'.
+
+ Approved-By: Simon Marchi <simon.marchi@efficios.com>
+
+2023-01-18 Maciej W. Rozycki <macro@embecosm.com>
+
+ GDB: Add missing inline documentation for `add_setshow_cmd_full'
+ Complement commit 1d7fe7f01b93 ("gdb: Introduce setting construct
+ within cmd_list_element") and add missing description for
+ `add_setshow_cmd_full'.
+
+ GDB: Correct inline documentation for `add_setshow_cmd_full_erased'
+ Use proper English in the description of SET_LIST and SHOW_LIST.
+
+2023-01-18 Maciej W. Rozycki <macro@embecosm.com>
+
+ GDB: Fix documentation for `theclass' parameters in cli-decode.c
+ Rename CLASS to THECLASS in the documentation for `theclass' parameters
+ throughout cli-decode.c, complementing commit fe978cb071b4 ("C++ keyword
+ cleanliness, mostly auto-generated").
+
+ Approved-By: Simon Marchi <simon.marchi@efficios.com>
+
+2023-01-18 Tom Tromey <tom@tromey.com>
+
+ Fix 'make TAGS' in gdbserver
+ PR build/29003 points out that "make TAGS" is broken in gdbserver.
+ This patch fixes the problem that is pointed out there, plus another
+ one I noticed while working on that -- namely that the "sed" computes
+ the wrong names for some source files. Finally, a couple of obsolete
+ variable references are removed.
+
+ Bug: https://sourceware.org/bugzilla/show_bug.cgi?id=29003
+
+2023-01-18 Carl Love <cel@us.ibm.com>
+
+ Revert "X86: reverse-finish fix"
+ This reverts commit b22548ddb30bfb167708e82d3bb932461c1b703a.
+
+ This patch is being reverted since the patch series is causing regressions.
+
+2023-01-18 Carl Love <cel@us.ibm.com>
+
+ Revert "PowerPC: fix for gdb.reverse/finish-precsave.exp and gdb.reverse/finish-reverse.exp"
+ This reverts commit 92e07580db6a5572573d5177ca23933064158f89.
+
+ Reverting patch as the patch series is causing regressions.
+
+2023-01-18 Jan Vrany <jan.vrany@labware.com>
+
+ gdb: care for dynamic objfiles in build_id_bfd_get ()
+ Accessing gdb.Objfile.build_id caused GDB to crash when objfile is
+ dynamic, that is created by JIT reader API.
+
+ The issue was NULL-pointer dereferencing in build_id_bfd_get () because
+ dynamic objfiles have no underlaying BFD structure. This commit fixes
+ the problem by a NULL-check in build_id_bfd_get ().
+
+2023-01-18 Nick Clifton <nickc@redhat.com>
+
+ Speed up objcopy's note merging.
+ PR 29993
+ * objcopy.c (merge_gnu_build_notes): Remember the last non-deleted note in order to speed up the scan for matching notes.
+
+2023-01-18 Mike Frysinger <vapier@gentoo.org>
+
+ sim: ppc: drop local psim link
+ This has never been installed, and it's not clear anyone cares about
+ it in the local build dir (when the main program is sim/ppc/run), so
+ drop all the logic to simplify.
+
+2023-01-18 Mark Harmstone <mark@harmstone.com>
+
+ Use subsystem to distinguish between pei-arm-little and pei-arm-wince-little
+ Running objdump against a 32-bit ARM PE file currently needs
+ disambiguation, as it gets picked up by both pei-arm-little and
+ pei-arm-wince-little.
+
+ This adds a check in pe_bfd_object_p so that the subsystem in the PE
+ header is used to do the disambiguation for us, so that WinCE images get
+ assigned to pei-arm-wince-little, and everything else to pei-arm-little.
+
+2023-01-18 Vladimir Mezentsev <vladimir.mezentsev@oracle.com>
+
+ Revert "gprofng: PR29987 bfd/archive.c:1447: undefined reference to `filename_ncmp'"
+ This reverts commit c2a5d74050ea9d7897b4122ef57c627d395683b3.
+
+2023-01-18 GDB Administrator <gdbadmin@sourceware.org>
+
+ Automatic date update in version.in
+
+2023-01-17 Tom Tromey <tromey@adacore.com>
+
+ Remove two unused fields from gdbarch
+ When I converted gdbarch to use the registry, I forgot to remove the
+ two fields that were used to implement the previous approach. This
+ patch removes them. Tested by rebuilding.
+
+ Use require in paramless.exp
+ The new paramless.exp test was not converted to the new "require"
+ approach. This patch fixes the problem.
+
+2023-01-17 Carl Love <cel@us.ibm.com>
+
+ PowerPC: fix for gdb.reverse/finish-precsave.exp and gdb.reverse/finish-reverse.exp
+ PR record/29927 - reverse-finish requires two reverse next instructions to
+ reach previous source line
+
+ PowerPC uses two entry points called the local entry point (LEP) and the
+ global entry point (GEP). Normally the LEP is used when calling a
+ function. However, if the table of contents (TOC) value in register 2 is
+ not valid the GEP is called to setup the TOC before execution continues at
+ the LEP. When executing in reverse, the function finish_backward sets the
+ break point at the alternate entry point (GEP). However if the forward
+ execution enters via the normal entry point (LEP), the reverse execution
+ never sees the break point at the GEP of the function. Reverse execution
+ continues until the next break point is encountered or the end of the
+ recorded log is reached causing gdb to stop at the wrong place.
+
+ This patch adds a new address to struct execution_control_state to hold the
+ address of the alternate function start address, known as the GEP on
+ PowerPC. The finish_backwards function is updated. If the stopping point
+ is between the two entry points (the LEP and GEP on PowerPC), the stepping
+ range is set to execute back to the alternate entry point (GEP on PowerPC).
+ Otherwise, a breakpoint is inserted at the normal entry point (LEP on
+ PowerPC).
+
+ Function process_event_stop_test checks uses a stepping range to stop
+ execution in the caller at the first instruction of the source code line.
+ Note, on systems that only support one entry point, the address of the two
+ entry points are the same.
+
+ Test finish-reverse-next.exp is updated to include tests for the
+ reverse-finish command when the function is entered via the normal entry
+ point (i.e. the LEP) and the alternate entry point (i.e. the GEP).
+
+ The patch has been tested on X86 and PowerPC with no regressions.
+
+2023-01-17 Carl Love <cel@us.ibm.com>
+
+ X86: reverse-finish fix
+ PR record/29927 - reverse-finish requires two reverse next instructions to
+ reach previous source line
+
+ Currently on X86, when executing the finish command in reverse, gdb does a
+ single step from the first instruction in the callee to get back to the
+ caller. GDB stops on the last instruction in the source code line where
+ the call was made. When stopped at the last instruction of the source code
+ line, a reverse next or step command will stop at the first instruction
+ of the same source code line thus requiring two step/next commands to
+ reach the previous source code line. It should only require one step/next
+ command to reach the previous source code line.
+
+ By contrast, a reverse next or step command from the first line in a
+ function stops at the first instruction in the source code line where the
+ call was made.
+
+ This patch fixes the reverse finish command so it will stop at the first
+ instruction of the source line where the function call was made. The
+ behavior on X86 for the reverse-finish command now matches doing a
+ reverse-next from the beginning of the function.
+
+ The proceed_to_finish flag in struct thread_control_state is no longer
+ used. This patch removes the declaration, initialization and setting of
+ the flag.
+
+ This patch requires a number of regression tests to be updated. Test
+ gdb.mi/mi-reverse.exp no longer needs to execute two steps to get to the
+ previous line. The gdb output for tests gdb.reverse/until-precsave.exp
+ and gdb.reverse/until-reverse.exp changed slightly. The expected result in
+ tests gdb.reverse/amd64-failcall-reverse.exp and
+ gdb.reverse/singlejmp-reverse.exp are updated to the correct expected
+ result.
+
+ This patch adds a new test gdb.reverse/finish-reverse-next.exp to test the
+ reverse-finish command when returning from the entry point and from the
+ body of the function.
+
+ The step_until proceedure in test gdb.reverse/step-indirect-call-thunk.exp
+ was moved to lib/gdb.exp and renamed cmd_until.
+
+ The patch has been tested on X86 and PowerPC to verify no additional
+ regression failures occured.
+
+ Bug: https://sourceware.org/bugzilla/show_bug.cgi?id=29927
+
+2023-01-17 Simon Marchi <simon.marchi@efficios.com>
+
+ gdb/testsuite: expect SIGSEGV from top GDB spawn id
+ When testing with the native-extended-gdbserver, I get:
+
+ Thread 1 "xgdb" received signal SIGSEGV, Segmentation fault.
+ 0x00007ffff6d828f2 in GC_find_limit_with_bound () from /usr/lib/x86_64-linux-gnu/libgc.so.1
+ (gdb) FAIL: gdb.gdb/selftest.exp: xgdb is at prompt
+
+ This is because the -re that is supposed to match this SIGSEGV is after
+ `-i $inferior_spawn_id`. On native, the top and bottom GDB are on the
+ same spawn id, so it ends up working. But with a gdbserver board,
+ that's not the case. Move the SIGSEGV -re before the `-i
+ $inferior_spawn_id` line, such that it matches what the top GDB outputs.
+
+ Do the same fix in gdb.gdb/python-helper.exp.
+
+ Change-Id: I3291630e218a5a3a6a47805b999ddbc9b968c927
+ Approved-By: Tom Tromey <tom@tromey.com>
+
+2023-01-17 Tom Tromey <tromey@adacore.com>
+
+ Fix parameter-less template regression in new DWARF reader
+ PR c++/29896 points out a regression in the new DWARF reader. It does
+ not properly handle a case like "break fn", where "fn" is a template
+ function.
+
+ This happens because the new index uses strncasecmp to compare.
+ However, to make this work correctly, we need a custom function that
+ ignores template parameters.
+
+ This patch adds a custom comparison function and fixes the bug. A new
+ test case is included.
+
+ Bug: https://sourceware.org/bugzilla/show_bug.cgi?id=29896
+
+2023-01-17 Tom Tromey <tromey@adacore.com>
+
+ Move hash_entry and eq_entry into cooked_index::do_finalize
+ I was briefly confused by the hash_entry and eq_entry functions in the
+ cooked index. They are only needed in a single method, and that
+ method already has a couple of local lambdas for a different hash
+ table. So, it seemed cleaner to move these there as well.
+
+ Don't erase empty indices in DWARF reader
+ The DWARF reader has some code to remove empty indices. However, I
+ think this code has been obsolete since some earlier changes to
+ parallel_for_each. This patch removes this code.
+
+ Avoid submitting empty tasks in parallel_for_each
+ I found that parallel_for_each would submit empty tasks to the thread
+ pool. For example, this can happen if the number of tasks is smaller
+ than the number of available threads. In the DWARF reader, this
+ resulted in the cooked index containing empty sub-indices. This patch
+ arranges to instead shrink the result vector and process the trailing
+ entries in the calling thread.
+
+2023-01-17 Stam Markianos-Wright <stam.markianos-wright@arm.com>
+
+ gas: arm: Change warning message to not reference specific A-class architecture revision
+ We noticed that a warning message about the use of scalar fp16
+ instructions being UNPREDICTABLE when conditionalized in an IT
+ block referenced the specific A-class architecture revision
+ ARMv8.2-A.
+ Many of these instructions are now also part of ARMv8.1-M, so
+ the warning message had become misleading. Here we just change
+ the message to not specify an architecture revision at all and
+ update all testing accordingly. This was done with a simple
+ find-n-replace within the binutils sources. No tests have
+ regressed for the arm target.
+
+ gas/ChangeLog:
+
+ * config/tc-arm.c (do_scalar_fp16_v82_encode): Remove
+ ARMv8.2-A from the warning message.
+ (do_neon_movhf): Likewise
+ * testsuite/gas/arm/armv8-2-fp16-scalar-bad.l: Likewise
+ * testsuite/gas/arm/mve-vaddsub-it-bad.l: Likewise
+ * testsuite/gas/arm/mve-vcvtne-it-bad.l: Likewise
+ * testsuite/gas/arm/mve-vcvtne-it.d: Likewise
+
+2023-01-17 Stam Markianos-Wright <stam.markianos-wright@arm.com>
+
+ gas: arm: Fix a further IT-predicated vcvt issue in the presense of MVE vcvtn
+ Previously we had experienced issues with assembling a "VCVTNE" instruction
+ in the presence of the MVE architecture extension, because it could be
+ interpreted both as:
+
+ * The base instruction VCVT + NE for IT predication when inside an IT block.
+ * The MVE instruction VCVTN + E in the Else of a VPT block.
+
+ Given a C reproducer of:
+ ```
+ int test_function(float value)
+ {
+ int ret_val = 10;
+ if (value != 0.0)
+ {
+ ret_val = (int) value;
+ }
+ return ret_val;
+ }
+ ```
+ GCC generates a VCVTNE instruction based on the `truncsisf2_vfp`
+ pattern, which will look like:
+ `vcvtne.s32.f32 s-reg, s-reg`
+ This still triggers an error due to being misidentified as "vcvtn+e"
+ Similar errors were found with other type combinations and instruction
+ patterns (these have all been added to the testing of this patch).
+
+ This class of errors was previously worked around by:
+ https://sourceware.org/pipermail/binutils/2020-August/112728.html
+ which addressed this by looking at the operand types, however,
+ that isn't adequate to cover all the extra cases that have been
+ found. Instead, we add some special-casing logic earlier when
+ the instructions are parsed that is conditional on whether we are
+ in a VPT block or not, when the instruction is parsed.
+
+ gas/ChangeLog:
+
+ * config/tc-arm.c (opcode_lookup): Add special vcvtn handling.
+ * testsuite/gas/arm/mve-vcvtne-it-bad.l: Add further testing.
+ * testsuite/gas/arm/mve-vcvtne-it-bad.s: Likewise.
+ * testsuite/gas/arm/mve-vcvtne-it.d: Likewise.
+ * testsuite/gas/arm/mve-vcvtne-it.s: Likewise.
+
+2023-01-17 Nick Clifton <nickc@redhat.com>
+
+ Fix snafu in previous delta for elf32-csky.c
+
+2023-01-17 Xianmiao Qu <cooper.qu@linux.alibaba.com>
+
+ C-SKY: Fix machine flag.
+ * elf32-csky.c (elf32_csky_merge_attributes): Don't save and restore the ARCH attribute, it will actually clear the ARCH attribute. (csky_elf_merge_private_bfd_data): Store the machine flag correctly.
+
+2023-01-17 GDB Administrator <gdbadmin@sourceware.org>
+
+ Automatic date update in version.in
+
+2023-01-16 Enze Li <enze.li@hotmail.com>
+
+ libctf: update regexp to allow makeinfo to build document
+ While trying to build gdb on latest openSUSE Tumbleweed, I noticed the
+ following warning,
+
+ checking for makeinfo... makeinfo --split-size=5000000
+ configure: WARNING:
+ *** Makeinfo is too old. Info documentation will not be built.
+
+ then I checked the version of makeinfo, it said,
+ ======
+ $ makeinfo --version
+ texi2any (GNU texinfo) 7.0.1
+
+ Copyright (C) 2022 Free Software Foundation, Inc.
+ License GPLv3+: GNU GPL version 3 or later <http://gnu.org/licenses/gpl.html>
+ This is free software: you are free to change and redistribute it.
+ There is NO WARRANTY, to the extent permitted by law.
+ ======
+
+ After digging a little bit, it became quite obvious that a dot is
+ missing in regexp that makes it impossible to match versions higher than
+ 7.0, and here's the solution:
+
+ - | egrep 'texinfo[^0-9]*(6\.[3-9]|[7-9][0-9])' >/dev/null 2>&1; then
+ + | egrep 'texinfo[^0-9]*(6\.[3-9]|[7-9]\.[0-9])' >/dev/null 2>&1; then
+
+ However, Eli pointed out that the solution above has another problem: it
+ will stop working when Texinfo 10.1 will be released. Meanwhile, he
+ suggested to solve this problem permanently. That is, we don't care
+ about the minor version for Texinfo > 6.9, we only care about the major
+ version.
+
+ In this way, the problem will be resolved permanently, thanks to Eli.
+
+ libctf/ChangeLog:
+
+ * configure: Regenerated.
+ * configure.ac: Update regexp to match versions higher than 7.0.
+
+2023-01-16 Alan Modra <amodra@gmail.com>
+
+ Correct ld-pe/aarch64.d test output
+ "foo" is at 0x2010. This corrects the expected output for .long and
+ .word referencing foo, showing a problem with relocation handling.
+
+ * testsuite/ld-pe/aarch64.d: Correct expected output.
+
+2023-01-16 Alan Modra <amodra@gmail.com>
+
+ Tidy gas/expr.c static state
+ * expr.c (seen, nr_seen): Make file scope.
+ (expr_begin): Clear seen, nr_seen, and expr_symbol_lines.
+ (expr_end): New function.
+ * expr.h (expr_end): Declare.
+ * output-file.c (output_file_close): Call expr_end.
+ * config/tc-hppa.c (expr_end): Rename to expr_parse_end.
+ * config/tc-mips.c: Likewise.
+ * config/tc-riscv.c: Likewise.
+ * config/tc-sparc.c: Likewise.
+
+ Leftover hack from i960-coff
+ * reloc.c (bfd_perform_relocation, bfd_install_relocation): Remove
+ i960-coff target hack.
+
+2023-01-16 Alan Modra <amodra@gmail.com>
+
+ COFF CALC_ADDEND comment
+ Old COFF (and AOUT) targets have unusual relocation addends.
+
+ * coffcode.h (<Reading relocations>): Describe COFF addends.
+
+2023-01-16 Alan Modra <amodra@gmail.com>
+
+ PR29991, MicroMIPS flag erased after align directives
+ PR 29991
+ * config/tc-mips.c (s_align): Call file_mips_check_options and
+ mips_mark_labels.
+ * testsuite/gas/mips/align-after-label.s,
+ * testsuite/gas/mips/mips-align-after-label.d,
+ * testsuite/gas/mips/micromips-align-after-label.d: New test.
+ * testsuite/gas/mips/mips.exp: Run it.
+
+2023-01-16 Nick Clifton <nickc@redhat.com>
+
+ Update release making howto
+
+ Updated translations for the gas and binutils sub-directories
+
+2023-01-16 Mike Frysinger <vapier@gentoo.org>
+
+ sim: assume sys/stat.h always exists (via gnulib)
+ We have many uses of sys/stat.h that are unprotected by HAVE_SYS_STAT_H,
+ so this is more formalizing the reality that we require this header.
+ Since we switched to gnulib, it guarantees that a sys/stat.h exists
+ for us to include, so we're doubly OK.
+
+ sim: formally assume unistd.h always exists (via gnulib)
+ We have many uses of unistd.h that are unprotected by HAVE_UNISTD_H,
+ so this is more formalizing the reality that we require this header.
+ Since we switched to gnulib, it guarantees that a unistd.h exists
+ for us to include, so we're doubly OK.
+
+ sim: build: stop probing system extensions (ourselves)
+ This logic was added in order to expose the strsignal prototype for
+ nrun.c. Since then, we've migrated to gnulib as our portability layer,
+ and it takes care of probing system extensions for us, so there's no
+ need to duplicate the work.
+
+2023-01-16 Mike Frysinger <vapier@gentoo.org>
+
+ sim: modules.c: fix generation after recent refactors
+ Add explicit arch-specific modules.c rules to keep the build from
+ generating an incorrect common/modules.c. Otherwise the pattern
+ rules would cascade such that it'd look for $arch/modules.o which
+ turned into common/modules.c which triggered the gen rule.
+
+ My local testing of this code didn't catch this bug because of how
+ Automake manages .Po (dependency files) in incremental builds -- it
+ was adding extra rules that override the pattern rules which caused
+ the build to generate correct modules.c files. But when building
+ from a cold cache, the pattern rules would force common/modules.c to
+ be used leading to crashes at runtime.
+
+2023-01-16 GDB Administrator <gdbadmin@sourceware.org>
+
+ Automatic date update in version.in
+
+2023-01-15 Mark Wielaard <mark@klomp.org>
+
+ sim: microblaze, mn10300: remove signal.h include in interp.c
+ signal.h isn't needed in microblaze and mn10300 interp.c
+ so don't include it.
+
+2023-01-15 Mike Frysinger <vapier@gentoo.org>
+
+ sim: m32r: fix typos in stamp depends
+ Copying & pasting the first rule missed updating the dep to the right
+ stamp file.
+
+ sim: igen: simplify build logic a little
+ Now that all ports (that use igen) build in the top-level and depend
+ on igen, we can move the conditional logic out of configure. We also
+ switch from noinst_LIBRARIES to EXTRA_LIBRARIES so that the library
+ is only built when needed (i.e. the igen tool is used).
+
+ sim: build: drop depdir subdir hack
+ Now that all the ports compile some C files in their arch dirs, Automake
+ guarantees creating the depdir for us, so we can drop our configure hack.
+
+ sim: common: simplify modules.c deps
+ Now that all ports (other than ppc) build in the top-level, we don't
+ need to expand all the modules.c targets as a recursive dep. Each
+ port depends on their respective file now, and the ppc port doesn't
+ use it at all.
+
+ sim: common: move modules.c to source tracking
+ This makes sure the arch-specific modules.c wildcard is matched and
+ not the common/%.c so that we compile it correctly. It also makes
+ sure each subdir has depdir logic enabled.
+
+ sim: common: move libcommon.a dep to ppc code
+ Rather than force this to be built ahead of time for all targets,
+ move the dep to the ppc code since it's the only user of it now.
+
+ sim: build: drop most recursive build deps
+ Now that we build these objects in the top dir & generate modules.c
+ there, we don't need to generate them all first -- we can let the
+ normal dependency graph take care of building things in parallel.
+
+ sim: common: move libcommon.a objects to sources
+ This simplifies the build logic and avoids an Automake bug where the
+ common_libcommon_a_OBJECTS variable isn't set in the arch libsim.a
+ DEPENDENCIES for targets that, alphabetically, come before "common".
+ We aren't affected by that bug with the current code, but as we move
+ things out of SIM_ALL_RECURSIVE_DEPS and rely on finer dependencies,
+ we will trip over it.
+
+ sim: igen: simplify build dep
+ Now that all ports (other than ppc) build in the top-level, we don't
+ need to mark the igen tool as a recursive dep. Each port depends on
+ the tool if it actually uses it, and ppc doesn't use it at all.
+
+ sim: common: simplify hw-config.h deps
+ Now that all ports (other than ppc) build in the top-level, we don't
+ need to expand all the hw-config.h targets as a recursive dep. Each
+ port depends on their respective header now, and the ppc port doesn't
+ use it at all.
+
+ sim: build: drop AM_MAKEFLAGS settings
+ We don't have any recursive builds anymore, so we can drop this logic.
+
+2023-01-15 GDB Administrator <gdbadmin@sourceware.org>
+
+ Automatic date update in version.in
+
+2023-01-14 Tom Tromey <tom@tromey.com>
+
+ Pass internal gdb flags to --configuration invocations
+ The test suite uses the --configuration flag to feature-test gdb.
+ However, when I added this, I neglected to pass the internal gdbflags
+ to this, causing an error, which then caused failures in the test
+ suite (which would not be seen if you'd ever run "make install").
+
+ This patch fixes the bug. Tested by removing my install tree first,
+ to verify that I could reproduce the failure.
+
+2023-01-14 Nick Clifton <nickc@redhat.com>
+
+ Update how-to-make-a-release file now that the 2.40 release is out
+
+2023-01-14 GDB Administrator <gdbadmin@sourceware.org>
+
+ Automatic date update in version.in
+
+2023-01-13 Mike Frysinger <vapier@gentoo.org>
+
+ sim: build: delete Make-common.in logic
+ Now that all (other than ppc) build in the top-level, this logic is
+ unused, so punt it all.
+
+2023-01-13 Tom Tromey <tom@tromey.com>
+
+ Rename to allow_tui_tests
+ This changes skip_tui_tests to invert the sense, and renames it to
+ allow_tui_tests. It also rewrites this function to use the output of
+ "gdb --configuration", and it adds a note about the state of the TUI
+ to that output.
+
+ Rename to allow_guile_tests
+ This changes skip_guile_tests to invert the sense, and renames it to
+ allow_guile_tests. It also rewrites this proc to check the output of
+ "gdb --configuration", as was done for Python. Then it changes the
+ code to use "require" where possible.
+
+ Rename to allow_hw_breakpoint_tests
+ This changes skip_hw_breakpoint_tests to invert the sense, and renames
+ it to allow_hw_breakpoint_tests. This also converts some tests to use
+ "require" -- I missed this particular check in the first series.
+
+ Rename to allow_tsx_tests
+ This changes skip_tsx_tests to invert the sense, and renames it to
+ allow_tsx_tests.
+
+ Rename to allow_shlib_tests
+ This changes skip_shlib_tests to invert the sense, and renames it to
+ allow_shlib_tests.
+
+ Rename to allow_rust_tests
+ This changes skip_rust_tests to invert the sense, and renames it to
+ allow_rust_tests.
+
+ Rename to allow_python_tests
+ This changes skip_python_tests to invert the sense, and renames it to
+ allow_python_tests.
+
+ Rename to allow_perf_tests
+ This changes skip_perf_tests to invert the sense, and renames it to
+ allow_perf_tests.
+
+ Rename to allow_opencl_tests
+ This changes skip_opencl_tests to invert the sense, and renames it to
+ allow_opencl_tests.
+
+ Rename to allow_ifunc_tests
+ This changes skip_ifunc_tests to invert the sense, and renames it to
+ allow_ifunc_tests.
+
+ Rename to allow_hw_watchpoint_tests
+ This changes skip_hw_watchpoint_tests to invert the sense, and renames
+ it to allow_hw_watchpoint_tests.
+
+ Rename to allow_hw_watchpoint_multi_tests
+ This changes skip_hw_watchpoint_multi_tests to invert the sense, and
+ renames it to allow_hw_watchpoint_multi_tests.
+
+ Rename to allow_hw_watchpoint_access_tests
+ This changes skip_hw_watchpoint_access_tests to invert the sense, and
+ renames it to allow_hw_watchpoint_access_tests.
+
+ Rename to allow_go_tests
+ This changes skip_go_tests to invert the sense, and renames it to
+ allow_go_tests.
+
+ Rename to allow_gdbserver_tests
+ This changes skip_gdbserver_tests to invert the sense, and renames it
+ to allow_gdbserver_tests.
+
+ Rename to allow_fortran_tests
+ This changes skip_fortran_tests to invert the sense, and renames it to
+ allow_fortran_tests.
+
+ Rename to allow_d_tests
+ This changes skip_d_tests to invert the sense, and renames it to
+ allow_d_tests.
+
+ Rename to allow_dlmopen_tests
+ This changes skip_dlmopen_tests to invert the sense, and renames it to
+ allow_dlmopen_tests.
+
+ Rename to allow_debuginfod_tests
+ This changes skip_debuginfod_tests to invert the sense, and renames it
+ to allow_debuginfod_tests.
+
+ Rename to allow_ctf_tests
+ This changes skip_ctf_tests to invert the sense, and renames it to
+ allow_ctf_tests.
+
+ Rename to allow_cplus_tests and allow_stl_tests
+ This changes skip_cplus_tests to invert the sense, and renames it to
+ allow_cplus_tests. This one also converts skip_stl_tests to
+ allow_stl_tests, as that was convenient to do at the same time.
+
+ Rename to allow_btrace_tests
+ This changes skip_btrace_tests to invert the sense, and renames it to
+ allow_btrace_tests.
+
+ Rename to allow_btrace_pt_tests
+ This changes skip_btrace_pt_tests to invert the sense, and renames it
+ to allow_btrace_pt_tests.
+
+ Rename to allow_avx512fp16_tests
+ This changes skip_avx512fp16_tests to invert the sense, and renames it
+ to allow_avx512fp16_tests.
+
+ Rename to allow_avx512bf16_tests
+ This changes skip_avx512bf16_tests to invert the sense, and renames it
+ to allow_avx512bf16_tests.
+
+ Rename to allow_ada_tests
+ This changes skip_ada_tests to invert the sense, and renames it to
+ allow_ada_tests.
+
+ Rename to allow_aarch64_sve_tests
+ This changes skip_aarch64_sve_tests to invert the sense, and renames
+ it to allow_aarch64_sve_tests.
+
+ Rename to allow_xml_test
+ This changes gdb_skip_xml_test to invert the sense, and renames it to
+ allow_xml_test.
+
+ Use "require" for Python tests
+ This changes various tests to use "require" for the Python feature.
+
+2023-01-13 Tom Tromey <tom@tromey.com>
+
+ Fix latent bug in default_prompt_gdb_start
+ default_prompt_gdb_start mimics default_gdb_start, but does not set
+ the use_gdb_stub global. This caused one Python test to work only
+ because it used the ordinary gdb_start before later using
+ default_prompt_gdb_start.
+
+ This patch updates default_prompt_gdb_start to set this global as
+ well.
+
+2023-01-13 Tom Tromey <tom@tromey.com>
+
+ Remove mi_skip_python_tests
+ mi_skip_python_tests was necessary because skip_python_tests used the
+ running gdb, and so needed to know what prompt to expect. Now that
+ skip_python_tests has been rewritten, mi_skip_python_tests is no
+ longer needed.
+
+ Rewrite skip_python_tests
+ This rewrites skip_python_tests to examine the output of
+ "gdb --configuration". This is a bit nicer because it
+ does not require an already-running gdb.
+
+ Use require gnat_runtime_has_debug_info
+ This changes some tests to use "require gnat_runtime_has_debug_info".
+
+ Use require !skip_debuginfod_tests
+ This changes some tests to use "require !skip_debuginfod_tests".
+
+ Use require using_fission
+ This changes some tests to use "require using_fission".
+
+ Use require target_can_use_run_cmd
+ This changes some tests to use "require target_can_use_run_cmd".
+
+ Use require !skip_opencl_tests
+ This changes some tests to use "require !skip_opencl_tests".
+
+ Use require !skip_perf_tests
+ This changes some tests to use "require !skip_perf_tests".
+
+ Use require gdb_trace_common_supports_arch
+ This changes some tests to use "require gdb_trace_common_supports_arch".
+
+ Use require gdb_skip_xml_test
+ This changes some tests to use "require gdb_skip_xml_test".
+
+ Use require !gdb_debug_enabled
+ This changes some tests to use "require !gdb_debug_enabled".
+
+ Use require is_c_compiler_gcc
+ This changes some tests to use "require is_c_compiler_gcc".
+
+ Use require !skip_shlib_tests
+ This changes some tests to use "require !skip_shlib_tests". This patch
+ cleans up a few spots that were missed in the earlier patch.
+
+ Use require !skip_gdbserver_tests
+ This changes some tests to use "require !skip_gdbserver_tests".
+
+ Use require isnative
+ This changes some tests to use "require isnative".
+
+ Use require can_spawn_for_attach
+ This changes some tests to use "require can_spawn_for_attach".
+
+ Use require !use_gdb_stub
+ This changes some tests to use "require !use_gdb_stub".
+
+ Use require support_go_compile
+ This changes some tests to use "require support_go_compile".
+
+ Use require supports_get_siginfo_type
+ This changes some tests to use "require supports_get_siginfo_type".
+
+ Use require can_single_step_to_signal_handler
+ This changes some tests to use "require can_single_step_to_signal_handler".
+
+ Use require is_elf_target
+ This changes some tests to use "require is_elf_target".
+
+ Use require is_amd64_regs_target
+ This changes some tests to use "require is_amd64_regs_target".
+
+ Use require is_aarch32_target
+ This changes some tests to use "require is_aarch32_target".
+
+ Use require is_aarch64_target
+ This changes some tests to use "require is_aarch64_target".
+
+ Use require support_displaced_stepping
+ This changes some tests to use "require support_displaced_stepping".
+
+ Use require !skip_avx_*
+ This changes some tests to use "require" with !skip_avx_*.
+
+ Use require !skip_btrace_tests
+ This changes some tests to use "require !skip_btrace_tests".
+
+ Use require !skip_btrace_pt_tests
+ This changes some tests to use "require !skip_btrace_pt_tests" and
+ "require !skip_tsx_tests".
+
+ Use require !skip_aarch64_sve_tests
+ This changes some tests to use "require !skip_aarch64_sve_tests".
+
+ Use require !skip_ifunc_tests
+ This changes some tests to use "require !skip_ifunc_tests".
+
+ Use require !skip_hw_watchpoint_tests
+ This changes some tests to use "require !skip_hw_watchpoint_tests".
+
+ Use require !skip_ctf_tests
+ This changes some tests to use "require !skip_ctf_tests".
+
+ Use require !skip_d_tests
+ This changes some tests to use "require !skip_d_tests".
+
+ Use require !skip_go_tests
+ This changes some tests to use "require !skip_go_tests".
+
+ Use require !skip_ada_tests
+ This changes some tests to use "require !skip_ada_tests".
+
+ Use require !skip_fortran_tests
+ This changes some tests to use "require !skip_fortran_tests".
+
+ Use require !skip_rust_tests
+ This changes some tests to use "require !skip_rust_tests".
+
+ Use require !skip_stl_tests
+ This changes some tests to use "require !skip_stl_tests".
+
+ Use require !skip_dlmopen_tests
+ This changes some tests to use "require !skip_dlmopen_tests".
+
+ Use require !skip_shlib_tests
+ This changes some tests to use "require !skip_shlib_tests".
+
+ Use require !skip_cplus_tests
+ This changes some tests to use "require !skip_cplus_tests".
+
+ Use require is_x86_like_target
+ This changes some tests to use "require is_x86_like_target".
+
+ Use require dwarf2_support
+ This changes some tests to use "require dwarf2_support".
+
+ Use require supports_process_record
+ This changes some tests to use "require supports_process_record".
+
+ Use require supports_reverse
+ This changes some tests to use "require supports_reverse".
+
+2023-01-13 Tom Tromey <tom@tromey.com>
+
+ Use unsupported in 'require'
+ This changes 'require' to use 'unsupported' rather than 'untested'.
+ The latter doesn't really seem to be correct according to the DejaGNU
+ documentation:
+
+ Declares a test was not run. `untested' writes in the log file a
+ message beginning with _UNTESTED_, appending the `message' argument.
+ For example, you might use this in a dummy test whose only role is to
+ record that a test does not yet exist for some feature.
+
+ The example there, and some text elsewhere, is what makes me think
+ this isn't a great fit. On the other hand, 'unsupported' says:
+
+ Declares that a test case depends on some facility that does not exist
+ in the testing environment.
+
+2023-01-13 Tom Tromey <tom@tromey.com>
+
+ Change 'require' to accept a list of predicates
+ This changes 'require' to accept a list of simple predicates. For
+ now, each predicate is just the name of a proc, optionally prefixed
+ with "!" to indicate that the result should be inverted.
+
+ It's possible to make this fancier, but so far I haven't done so. One
+ idea I had is to allow a predicate to have associated text to display
+ on failure. Another is to convert the predicates that need a running
+ gdb (e.g., skip_python_tests) to start their own gdb, and then
+ 'require' could enforce the rule that gdb not be running when it is
+ called.
+
+2023-01-13 Tom Tromey <tom@tromey.com>
+
+ Don't use ensure_gdb_index with require
+ This series changes 'require' to take a list of simple predicates.
+ This patch backs out the one use of 'require' that doesn't conform to
+ this -- calling ensure_gdb_index.
+
+2023-01-13 Vladimir Mezentsev <vladimir.mezentsev@oracle.com>
+
+ gprofng: PR29987 bfd/archive.c:1447: undefined reference to `filename_ncmp'
+ gprofng/ChangeLog
+ 2023-01-12 Vladimir Mezentsev <vladimir.mezentsev@oracle.com>
+
+ PR gprofng/29987
+ * configure.ac: Remove dependencies on libbfd and libiberty.
+ * gprofng/src/Makefile.am: Likewise.
+ * configure: Rebuild.
+ * Makefile.in: Rebuild.
+ * src/Makefile.in: Rebuild.
+ * doc/Makefile.in: Rebuild.
+ * gp-display-html/Makefile.in: Rebuild.
+
+2023-01-13 Indu Bhagat <indu.bhagat@oracle.com>
+
+ libsframe: replace an strncat with strcat
+ Calling strncat with the size of the src string is not so meaningful.
+ The length argument to strncat should specify the remaining bytes
+ bytes in the destination; although in this case, it appears to be
+ unncessary altogether to use strncat in the first place.
+
+ libsframe/
+ * sframe-dump.c (dump_sframe_func_with_fres): Use of strcat is
+ just as fine.
+
+2023-01-13 Andrew Burgess <aburgess@redhat.com>
+
+ gdbserver: add comments to read_inferior_memory function
+ Just adding some comments to the gdbserver read_inferior_memory
+ function. No actual code changes.
+
+ gdb/infrun: add debug print in print_signal_received_reason
+ It would have helped me to see an infrun debug line being printed from
+ print_signal_received_reason, so I'm adding one.
+
+2023-01-13 Andrew Burgess <aburgess@redhat.com>
+
+ gdb: int to bool conversion for normal_stop
+ Change the return type of normal_stop (infrun.c) from int to bool.
+ Update callers.
+
+ I've also converted the (void) to () in the function declaration and
+ definition, given I was changing those lines anyway.
+
+ There should be no user visible changes after this commit.
+
+2023-01-13 Nick Clifton <nickc@redhat.com>
+
+ Updated Romainian translation for the bfd sub-directory
+
+2023-01-13 GDB Administrator <gdbadmin@sourceware.org>
+
+ Automatic date update in version.in
+
+2023-01-12 Tom Tromey <tromey@adacore.com>
+
+ Disable ptype/o for dynamic types
+ A user pointed out that "ptype/o" of a certain Ada type -- while in C
+ mode -- caused gdb to crash.
+
+ The bug here is that dynamic types can't really be printed this way.
+ This patch avoids the bug by disabling the "/o" feature in this case.
+
+ Note that using "ptype/o" in this way makes sense for the time being,
+ because the Ada code doesn't support the "/o" feature (yet); and in
+ any case gdb should not crash.
+
+2023-01-12 Hans-Peter Nilsson <hp@axis.com>
+
+ ARM: Fix ld bloat introduced between binutils-2.38 and 2.39
+ Since commit 9833b7757d24, "PR28824, relro security issues",
+ ELF_MAXPAGESIZE matters much more, with regards to layout of
+ the linked file. That commit fixed an actual bug, but also
+ exposes a problem for targets were that value is too high.
+
+ For example, for ARM(32, a.k.a. "Aarch32") specifically
+ bfd_arch_arm, it's set to 64 KiB, making all Linux(/GNU)
+ targets pay an extra amount of up to 60 KiB of bloat in
+ DSO:s and executables. This matters when there are many
+ such files, and where storage is expensive.
+
+ It's *mostly* bloat when using a Linux kernel, as ARM(32) is
+ a good example of an target where ELF_MAXPAGESIZE is set to
+ an extreme value for an obscure corner-case. The ARM
+ (32-bit) kernel has 4 KiB pages, has had that value forever,
+ and can't be configured to any other value. The use-case is
+ IIUC "Aarch32" emulation on an "Aarch64" (arm64) kernel, but
+ not just that, but a setup where the Linux page-size is
+ configured to something other than the *default* 4 KiB. Not
+ sure there actually any such systems in use, again with
+ both Aarch32 compatibility support and a non-4KiB pagesize,
+ with all the warnings in the kernel config and requiring the
+ "EXPERT" level set on.
+
+ So, let's do like x86-64 in a2267dbfc9e1 "x86-64: Use only
+ one default max-page-size" and set ELF_MAXPAGESIZE to 4096.
+
+ bfd:
+ * elf32-arm.c (ELF_MAXPAGESIZE): Always set to 0x1000.
+
+2023-01-12 Hans-Peter Nilsson <hp@axis.com>
+
+ ld/testsuite: Adjust for ELF_MAXPAGESIZE 0x1000
+ Many tests reflect a setting of ELF_MAXPAGESIZE to 64 KiB.
+ With ELF_MAXPAGESIZE changed to 4 KiB, layout is sometimes
+ different and symbols end up in other places. Avoid churn
+ and regexpification of old test patterns by passing the
+ max-page-size setting active at the time.
+
+ ld/testsuite:
+
+ * testsuite/ld-arm/arm-elf.exp,
+ testsuite/ld-arm/non-contiguous-arm2.d,
+ testsuite/ld-arm/non-contiguous-arm3.d,
+ testsuite/ld-arm/non-contiguous-arm5.d,
+ testsuite/ld-arm/non-contiguous-arm6.d,
+ testsuite/ld-arm/thumb-plt-got.d, testsuite/ld-arm/thumb-plt.d:
+ Pass -z max-page-size=0x10000 explicitly to test that rely on
+ that value in output-matching patterns.
+
+2023-01-12 Nick Alcock <nick.alcock@oracle.com>
+
+ libctf: ctf-link outdated input check faulty
+ This check has a pair of faults which, combined, can lead to memory
+ corruption. Firstly, it assumes that the values of the ctf_link_inputs
+ hash are ctf_dict_t's: they are not, they are ctf_link_input_t's, a much
+ shorter structure. So the flags check which is the core of this is
+ faulty (but happens, by chance, to give the right output on most
+ architectures, since usually we happen to get a 0 here, so the test that
+ checks this usually passes). Worse, the warning that is emitted when
+ the test fails is added to the wrong dict -- it's added to the input
+ dict, whose warning list is never consumed, rendering the whole check
+ useless. But the dict it adds to is still the wrong type, so we end up
+ overwriting something deep in memory (or, much more likely,
+ dereferencing a garbage pointer and crashing).
+
+ Fixing both reveals another problem: the link input is an *archive*
+ consisting of multiple members, so we have to consider whether to check
+ all of them for the outdated-func-info thing we are checking here.
+ However, no compiler exists that emits a mixture of members with this
+ flag on and members with it off, and the linker always reserializes (and
+ upgrades) such things when it sees them: so all members in a given
+ archive must have the same value of the flag, so we only need to check
+ one member per input archive.
+
+ libctf/
+ PR libctf/29983
+ * ctf-link.c (ctf_link_warn_outdated_inputs): Get the types of
+ members of ctf_link_inputs right, fixing a possible spurious
+ tesst failure / wild pointer deref / overwrite. Emit the
+ warning message into the right dict.
+
+2023-01-12 Nick Alcock <nick.alcock@oracle.com>
+
+ libctf: skip the testsuite from inside dejagnu
+ The libctf testsuite uses Tcl try/catch to trap run_output errors. This
+ is only supported in reasonably recent Tcls, so we detect the lack of
+ try/catch and suppress the testsuite via an Automake conditional in its
+ absence.
+
+ But this turns out not to work: Automake produces a check-DEJAGNU target
+ regardless of the value of this conditional and sticks it in an
+ unconditionally-executed part of the makefile, so the testsuite gets
+ executed anyway, and fails with a nasty-looking syntax error. We can't
+ disable it by taking "dejagnu" out of AUTOMAKE_OPTIONS, because if you
+ do that Automake stops you using RUNTEST, RUNTESTFLAGS and other
+ variables users would expect to work.
+
+ So move to disabling the testsuite from inside the testsuite itself,
+ importing the value of the former Automake conditional as a Tcl variable
+ and exiting very early in default.exp if it's false.
+
+ * configure.ac (TCL_TRY): No longer an Automake conditional.
+ Rename to...
+ (HAVE_TCL_TRY): ... this.
+ * Makefile.am: Drop TCL_TRY.
+ (development.exp): Set have_tcl_try.
+ * testsuite/config/default.exp: Exit if have_tcl_try is false.
+
+ * configure: Regenerated.
+ * Makefile.in: Likewise.
+
+2023-01-12 Nick Alcock <nick.alcock@oracle.com>
+
+ ctf: fix various dreadful typos in the ctf_archive format comments
+ When defining a format it helps to a) get the endianness right when you
+ explicitly state what it is and b) define things in terms of fields that
+ exist rather than fields that don't.
+
+ (A bunch of changes of names during implementation were not reflected in
+ these comments...)
+
+ Thanks to Jose "Eye of the Eagle" Marchesi for spotting these.
+
+ include/
+ * ctf.h (struct ctf_archive) [ctfa_ctfs]: The size element of
+ this is in little-endian byte order, not network byte order.
+ (struct ctf_archive_modent): This is positioned right after the
+ end fo the struct ctf_archive, not at the offset of a
+ nonexistent field. The number of elements in the array depends
+ on ctfa_ndicts, not another nonexistent field.
+
+2023-01-12 Nick Clifton <nickc@redhat.com>
+
+ Ensure that libbacktrace/allocfail.sh is not deleted when creating release tarballs.
+ * Makefile.am (CLEANFILES): Import patch from upstream to prevent
+ allocafail.sh from being removed when running 'make clean'.
+
+2023-01-12 Alan Modra <amodra@gmail.com>
+
+ Use __func__ rather than __FUNCTION__
+ We already use C99's __func__ in places, use it more generally. This
+ patch doesn't change uses in the testsuite. I've also left one in
+ gold.h that is protected by GCC_VERSION < 4003. If any of the
+ remaining uses bothers anyone I invite patches.
+
+ bfd/
+ * bfd-in.h: Replace __FUNCTION__ with __func__.
+ * elf32-bfin.c: Likewise.
+ * elfnn-aarch64.c: Likewise.
+ * elfxx-sparc.c: Likewise.
+ * bfd-in2.h: Regenerate.
+ gas/
+ * config/tc-cris.c: Replace __FUNCTION__ with __func__.
+ * config/tc-m68hc11.c: Likewise.
+ * config/tc-msp430.c: Likewise.
+ gold/
+ * dwp.h: Replace __FUNCTION__ with __func__.
+ * gold.h: Likewise, except for use inside GCC_VERSION < 4003.
+ ld/
+ * emultempl/pe.em: Replace __FUNCTION__ with __func__.
+ * emultempl/pep.em: Likewise.
+ * pe-dll.c: Likewise.
+
+2023-01-12 Alan Modra <amodra@gmail.com>
+
+ Remove myself as hppa32 maintainer
+ Reflects the reality that I haven't done much on hppa32 for years.
+
+2023-01-12 Mike Frysinger <vapier@gentoo.org>
+
+ sim: build: drop subdir Makefile.in files
+ These aren't used anymore, so punt them all.
+
+2023-01-12 GDB Administrator <gdbadmin@sourceware.org>
+
+ Automatic date update in version.in
+
+2023-01-11 Simon Marchi <simon.marchi@polymtl.ca>
+
+ gdb/doc: fix install-html with Texinfo 7
+ Starting with Texinfo 7 (this commit [1]), the output directory for the
+ HTML doc format is gdb/doc/gdb_html, rather than gdb/doc/gdb previously.
+ This breaks the install-html target, which expects the HTML doc to be in
+ gdb/doc/gdb:
+
+ $ make install-html MAKEINFO=makeinfo DESTDIR=/tmp/install
+ make[1]: Entering directory '/home/simark/build/binutils-gdb/gdb'
+ make[2]: Entering directory '/home/simark/build/binutils-gdb/gdb/doc'
+ makeinfo -DHAVE_MAKEINFO_CLICK --html -I /home/simark/src/binutils-gdb/gdb/doc/../../readline/readline/doc -I /home/simark/src/binutils-gdb/gdb/doc/../mi -I /home/simark/src/binutils-gdb/gdb/doc /home/simark/src/binutils-gdb/gdb/doc/gdb.texinfo
+ makeinfo -DHAVE_MAKEINFO_CLICK --html -I /home/simark/src/binutils-gdb/gdb/doc /home/simark/src/binutils-gdb/gdb/doc/stabs.texinfo
+ makeinfo -DHAVE_MAKEINFO_CLICK --html -I /home/simark/src/binutils-gdb/gdb/doc /home/simark/src/binutils-gdb/gdb/doc/annotate.texinfo
+ test -z "/usr/local/share/doc/gdb" || /bin/sh /home/simark/src/binutils-gdb/gdb/doc/../../mkinstalldirs "/tmp/install/usr/local/share/doc/gdb"
+ /usr/bin/install -c -m 644 '/home/simark/src/binutils-gdb/gdb/doc/gdb' '/tmp/install/usr/local/share/doc/gdb/gdb'
+ /usr/bin/install: cannot stat '/home/simark/src/binutils-gdb/gdb/doc/gdb': No such file or directory
+ /usr/bin/install -c -m 644 '/home/simark/src/binutils-gdb/gdb/doc/stabs' '/tmp/install/usr/local/share/doc/gdb/stabs'
+ /usr/bin/install: cannot stat '/home/simark/src/binutils-gdb/gdb/doc/stabs': No such file or directory
+ /usr/bin/install -c -m 644 '/home/simark/src/binutils-gdb/gdb/doc/annotate' '/tmp/install/usr/local/share/doc/gdb/annotate'
+ /usr/bin/install: cannot stat '/home/simark/src/binutils-gdb/gdb/doc/annotate': No such file or directory
+ make[2]: *** [Makefile:278: install-html] Error 1
+ make[2]: Leaving directory '/home/simark/build/binutils-gdb/gdb/doc'
+ make[1]: *** [Makefile:2240: subdir_do] Error 1
+ make[1]: Leaving directory '/home/simark/build/binutils-gdb/gdb'
+ make: *** [Makefile:2006: install-html] Error 2
+
+ Fix this by adding -o switches to the HTML targets, to force the output
+ directories.
+
+ [1] https://git.savannah.gnu.org/cgit/texinfo.git/commit/?id=a868421baf9c44227c43490687f8d6b8d6c95414
+
+ Change-Id: Ie147dc7b4a52eb2348005b8dc006a41b0784621f
+
+2023-01-11 Thiago Jung Bauermann <thiago.bauermann@linaro.org>
+
+ gdb: Update gdbarch.py with latest changes in gdbarch.c
+ Commit 2b16913cdca2 ("gdb: make gdbarch_alloc take ownership of the tdep")
+ changed gdbarch.c without updating gdbarch.py. As a result, running
+ gdbarch.py reverts those changes and causes the build to fail.
+
+ So change gdbarch.py to generate the current version of gdbarch.c.
+
+ Approved-By: Simon Marchi <simon.marchi@efficios.com>
+
+2023-01-11 Tom Tromey <tromey@adacore.com>
+
+ Set _WIN32_WINNT in common.m4 configure check
+ GCC recently added support for the Windows thread model, enabling
+ libstdc++ to support Windows natively. However, this supporrt
+ requires a version of Windows later than the minimum version that is
+ supported by GDB.
+
+ PR build/29966 points out that the GDB configure test for std::thread
+ does not work in this situation, because _WIN32_WINNT is not defined
+ in test program, and so <thread> seems to be fine.
+
+ This patch is an attempt to fix the problem, by using the same setting
+ for _WIN32_WINNT at configure time as is used at build time.
+
+ I don't have access to one of the older systems so I don't think I can
+ truly test this. I did do a mingw cross build, though. I'm going to
+ ask the bug reporter to test it.
+
+ Bug: https://sourceware.org/bugzilla/show_bug.cgi?id=29966
+
+2023-01-11 Simon Marchi <simon.marchi@polymtl.ca>
+
+ [gdb/testsuite] Fix regexp in gdb.threads/dlopen-libpthread.exp
+ Fix regexp in gdb.threads/dlopen-libpthread.exp:
+ 'libpthread\\.so' -> '/libpthread\\.so'.
+
+ Tested on x86_64-linux.
+
+2023-01-11 Alan Modra <amodra@gmail.com>
+
+ Fix XPASS weak symbols on x86_64-mingw32
+ Fixes commit 16fea92ccd99.
+
+ * testsuite/ld-scripts/weak.exp: Don't xfail x86_64 PE targets.
+ Do xfail other PE OS triplets by moving code setting xfails.
+
+2023-01-11 Nick Clifton <nickc@redhat.com>
+
+ Fix a potential illegal memory access in the BFD library when parsing a corrupt DWARF file.
+ PR 29988
+ * dwarf2.c (read_indexed_address): Fix check for an out of range
+ offset.
+
+2023-01-11 Tom de Vries <tdevries@suse.de>
+
+ [gdb/testsuite] Fix gdb.threads/dlopen-libpthread.exp for upstream glibc, again
+ On an x86_64 laptop running ubuntu 22.04.1 with unity desktop:
+ ...
+ $ echo $XDG_CURRENT_DESKTOP
+ Unity:Unity7:ubuntu
+ ...
+ I have:
+ ...
+ $ echo $LD_PRELOAD
+ libgtk3-nocsd.so.0
+ ...
+ due to package gtk3-nocsd, a package recommended by unity-session.
+
+ Consequently, for each exec these dependencies are pulled in, including
+ libpthread.so.0:
+ ...
+ $ lddtree /lib/x86_64-linux-gnu/libgtk3-nocsd.so.0
+ libgtk3-nocsd.so.0 => /lib/x86_64-linux-gnu/libgtk3-nocsd.so.0 (interpreter => none)
+ libdl.so.2 => /lib/x86_64-linux-gnu/libdl.so.2
+ libpthread.so.0 => /lib/x86_64-linux-gnu/libpthread.so.0
+ libc.so.6 => /lib/x86_64-linux-gnu/libc.so.6
+ ld-linux-x86-64.so.2 => /lib/x86_64-linux-gnu/ld-linux-x86-64.so.2
+ ...
+
+ So, while test-case gdb.threads/dlopen-libpthread.exp appears to run ok:
+ ...
+ # of expected passes 12
+ # of unsupported tests 1
+ ...
+ with LD_PRELOAD="" we have instead:
+ ...
+ (gdb) PASS: gdb.threads/dlopen-libpthread.exp: continue to breakpoint: notify
+ info sharedlibrary^M
+ From To Syms Read Shared Object Library^M
+ $hex $hex Yes /lib64/ld-linux-x86-64.so.2^M
+ $hex $hex Yes /lib/x86_64-linux-gnu/libc.so.6^M
+ $hex $hex Yes dlopen-libpthread.so^M
+ (gdb) FAIL: gdb.threads/dlopen-libpthread.exp: libpthread.so found
+ ...
+
+ The problem is that libpthread is expected as dependency of
+ dlopen-libpthread.so, but it's missing:
+ ...
+ $ lddtree dlopen-libpthread.so
+ dlopen-libpthread.so => ./dlopen-libpthread.so (interpreter => none)
+ libc.so.6 => $outputs/gdb.threads/dlopen-libpthread/dlopen-libpthread.so.d/libc.so.6
+ ld-linux-x86-64.so.2 => /lib/x86_64-linux-gnu/ld-linux-x86-64.so.2
+ ...
+ due to having glibc 2.35, which has libpthread integrated into libc.
+
+ Fix this by:
+ - adding a proc has_dependency
+ - using [has_dependency $exec libpthread.so] as hint that libpthread
+ may be preloaded
+ - using ![has_dependency $shlib libpthread.so] to detect that
+ the libpthread.so dependency is missing.
+
+ Also add a missing return after untested "no matching probes".
+
+ Tested on x86_64-linux, with and without LD_PRELOAD="".
+
+2023-01-11 Jan Beulich <jbeulich@suse.com>
+
+ gas/RISC-V: adjust assembler for opcode table re-ordering
+ PR gas/29940
+
+ With the single-operand JAL entry now sitting ahead of the two-operand
+ one, the parsing of a two-operand insn would first try to parse an 'a'-
+ style operand, resulting in the insertion of bogus (and otherwise
+ unused) undefined symbols in the symbol table, having register names.
+ Since 'a' is used as 1st operand only with J and JAL, and since JAL is
+ the only insn _also_ allowing for a register as 1st operand (and then
+ there being a 2nd one), special case this parsing aspect right there.
+
+ Reviewed-by: Palmer Dabbelt <palmer@rivosinc.com>
+
+2023-01-11 Alan Modra <amodra@gmail.com>
+
+ Tidy some global bfd state used by gas
+ * subsegs.c (subsegs_end): Clear abs and und userdata.
+
+2023-01-11 Alan Modra <amodra@gmail.com>
+
+ now_seg after closing output file
+ now_seg, a pointer into the output file sections, isn't valid after
+ the output file is closed. gas doesn't and shouldn't use now_seg
+ after this point of course, but let's be safe.
+
+ * output-file.c (output_file_close): Clear now_seg and now_subseg.
+
+2023-01-11 GDB Administrator <gdbadmin@sourceware.org>
+
+ Automatic date update in version.in
+
+2023-01-10 Tom Tromey <tom@tromey.com>
+
+ Fix bug in 'say_where' transform
+ The patch to change say_where into a method introduced a bug. This
+ patch fixes it.
+
+2023-01-10 Mark Harmstone <mark@harmstone.com>
+
+ gas: Restore tc_pe_dwarf2_emit_offset for pe-aarch64
+ Restores tc_pe_dwarf2_emit_offset in tc-aarch64.c, which is needed to
+ make sure that DWARF offsets are encoded correctly (they're secrels in
+ COFF). There were remnants of this there before, but they were removed
+ by Jedidiah's original patch - presumably because we didn't yet have
+ .secrel32.
+
+2023-01-10 Mark Harmstone <mark@harmstone.com>
+
+ Add aarch64-w64-mingw32 target
+ This adds a mingw target for aarch64, including windres and dlltool.
+
+ Note that the old value of jmp_aarch64_bytes was wrong, and this does
+ the same thing as MSVC does.
+
+2023-01-10 Mark Harmstone <mark@harmstone.com>
+
+ Add .secrel32 for pe-aarch64
+ Adds the .secrel32 pseudo-directive and its corresponding relocation.
+
+ Add pe-aarch64 relocations
+ This adds the remaining pe-aarch64 relocations, and gets them working.
+ It also brings in the constant directives from ELF, as otherwise .word
+ would be 2 rather than 4 bytes, and .xword and .dword wouldn't be
+ defined.
+
+2023-01-10 Mark Harmstone <mark@harmstone.com>
+
+ Fix size of external_reloc for pe-aarch64
+ This patch series finishes off the work by Jedidiah Thompson, and adds
+ support for creating aarch64 PE images.
+
+ This should be essentially complete: I've used this to create a "hello
+ world" Windows program in asm, and (with GCC patches) a UEFI program in
+ C. I think the only things missing are the .secidx relocation, which is
+ needed for PDBs, and the SEH pseudos used for C++ exceptions.
+
+ This first patch fixes the size of RELSZ; I'm not sure why it was 14 in
+ the first place. This is the size of the "Base Relocation Block" in
+ https://learn.microsoft.com/en-us/windows/win32/debug/pe-format, and
+ AFAIK should be 10 for everything.
+
+2023-01-10 Rohr, Stephan <stephan.rohr@intel.com>
+
+ gdb/dwarf2: Fix 'rw_pieced_value' for values casted to different type.
+ The 'rw_pieced_value' function is executed when fetching a (lazy)
+ variable described by 'DW_OP_piece' or 'DW_OP_bit_piece'. The
+ function checks the 'type' and 'enclosing_type' fields of the value
+ for identity.
+
+ * The 'type' field describes the type of a value.
+ * In most cases, the 'enclosing_type' field is identical to the
+ 'type' field.
+ * Scenarios where the 'type' and 'enclosing_type' of an object
+ differ are described in 'gdb/value.c'. Possible cases are:
+ * If a value represents a C++ object, then the 'type' field
+ gives the object's compile-time type. If the object actually
+ belongs to some class derived from `type', perhaps with other
+ base classes and additional members, then `type' is just a
+ subobject of the real thing, and the full object is probably
+ larger than `type' would suggest.
+ * If 'type' is a dynamic class (i.e. one with a vtable), then GDB
+ can actually determine the object's run-time type by looking at
+ the run-time type information in the vtable. GDB may then elect
+ to read the entire object.
+ * If the user casts a variable to a different type
+ (e.g. 'print (<type> []) <variable>'), the value's type is
+ updated before reading the value.
+
+ If a lazy value is fetched, GDB allocates space based on the enclosing
+ type's length and typically reads the 'full' object. This is not
+ implemented for pieced values and causes an internal error if 'type'
+ and 'enclosing_type' of a value are not identical.
+
+ However, GDB can read the value based on its type. Thus, this patch
+ fixes the previously mentioned cases by removing the check for identity.
+
+ Bug: https://sourceware.org/bugzilla/show_bug.cgi?id=28605
+
+ gdb/ChangeLog:
+ 2022-04-13 Stephan Rohr <stephan.rohr@intel.com>
+
+ * dwarf2/loc.c (rw_pieced_value): Fix check on 'type' and
+ 'enlcosing_type' when reading pieced value 'v'.
+
+ gdb/testsuite/ChangeLog:
+ 2022-04-13 Stephan Rohr <stephan.rohr@intel.com>
+
+ * gdb.dwarf2/shortpiece.exp: Added test cases.
+
+2023-01-10 Tom Tromey <tromey@adacore.com>
+
+ Convert say_where to method on code_breakpoint
+ 'say_where' is only useful (and only called for) code breakpoints, so
+ convert it to be a protected method on code_breakpoint.
+
+2023-01-10 Simon Marchi <simon.marchi@polymtl.ca>
+
+ gdb/doc: use @value{GDBP} in some spots
+ Examples are supposed to use @value{GDBP} instead of the literal "(gdb)"
+ (many of them already do). Update a bunch of spots where it wasn't the
+ case.
+
+ Change-Id: I601adaad61fd277a5fceea1759e49cede72e456d
+
+2023-01-10 Simon Marchi <simon.marchi@polymtl.ca>
+
+ gdb/doc: use @value{GDBN} in some spots
+ Change some spots to use "@value{GDBN}" instead of just "GDB".
+
+ Change-Id: I3fc26438e603538271cf33e4d148be5fda9ece7e
+
+2023-01-10 Simon Marchi <simon.marchi@polymtl.ca>
+
+ gdb/doc: some whitespace fixes
+ For consistency, replace tabs with spaces in all gdb.texinfo menus.
+
+ Change-Id: I0801a72cf82a8afe49ec842244f42d30719634ce
+
+2023-01-10 Stefan Schulze Frielinghaus <stefansf@linux.ibm.com>
+
+ IBM zSystems: Fix offset relative to static TLS
+ For local exec TLS relocations of the form foo@NTPOFF+x the addend was
+ ignored.
+
+ bfd/ChangeLog:
+
+ * elf32-s390.c (elf_s390_relocate_section): Honor addend for
+ R_390_TLS_LE32.
+ * elf64-s390.c (elf_s390_relocate_section): Honor addend for
+ R_390_TLS_LE64.
+
+ ld/ChangeLog:
+
+ * testsuite/ld-s390/reloctlsle-1.d: New test.
+ * testsuite/ld-s390/reloctlsle-1.s: New test.
+
+2023-01-10 Pekka Seppänen <pexu@sourceware.mail.kapsi.fi>
+
+ PR 29981 references to init.texi
+
+2023-01-10 Alan Modra <amodra@gmail.com>
+
+ Re: Move bfd_init to bfd.c
+ Commit b1c95bc4dd73 resulted in
+ ...bfd.texi:246: @include: could not find init.texi
+ which went unnoticed due to not building in a clean directory.
+
+ This fixes the problem by moving bfd_init earlier, giving it a
+ doc node, and stitching the nodes back together.
+
+ * bfd.c (bfd_init): Move earlier. Give it a doc inode.
+ Adjust other inodes to suit.
+ * doc/bfd.texi: Don't include init.texi. Adjust nodes to suit.
+
+2023-01-10 Mike Frysinger <vapier@gentoo.org>
+
+ sim: disable recursive make in (most) subdirs
+ Now that all (other than ppc) build in the top-level, we can disable
+ the recursive make calls to them. This speeds things up nicely.
+
+ sim: common: move test-hw-events to top-level build
+ This is an internal developer target that isn't normally compiled,
+ but it can still be occasionally useful. Move it to the top-level
+ build so we can kill off common/Make-common.in.
+
+ sim: move arch-specific file compilation of common/ files to top-level
+
+ sim: v850: move arch-specific file compilation to top-level
+ The arch-specific compiler flags are duplicated, but they'll be cleaned
+ up once we move all subdir compiles to the top-level.
+
+ sim: sh: move arch-specific file compilation to top-level
+
+ sim: rx: move arch-specific file compilation to top-level
+ The arch-specific flags are only used by the arch-specific modules,
+ not the common/ files, so we can delete them too.
+
+ sim: rl78: move arch-specific file compilation to top-level
+
+ sim: riscv: move arch-specific file compilation to top-level
+ The arch-specific compiler flags are duplicated, but they'll be cleaned
+ up once we move all subdir compiles to the top-level.
+
+ sim: pru: move arch-specific file compilation to top-level
+
+ sim: or1k: move arch-specific file compilation to top-level
+ The arch-specific compiler flags are duplicated, but they'll be cleaned
+ up once we move all subdir compiles to the top-level.
+
+ sim: msp430: move arch-specific file compilation to top-level
+
+ sim: moxie: move arch-specific file compilation to top-level
+ The arch-specific flags are only used by the arch-specific modules,
+ not the common/ files, so we can delete them too.
+
+ sim: mn10300: move arch-specific file compilation to top-level
+ The arch-specific compiler flags are duplicated, but they'll be cleaned
+ up once we move all subdir compiles to the top-level.
+
+ sim: mips: move arch-specific file compilation to top-level
+ The arch-specific compiler flags are duplicated, but they'll be cleaned
+ up once we move all subdir compiles to the top-level.
+
+ sim: microblaze: move arch-specific file compilation to top-level
+
+ sim: mcore: move arch-specific file compilation to top-level
+
+ sim: m68hc11: move arch-specific file compilation to top-level
+ The arch-specific compiler flags are duplicated, but they'll be cleaned
+ up once we move all subdir compiles to the top-level.
+
+ sim: m32r: move arch-specific file compilation to top-level
+
+ sim: m32c: move arch-specific file compilation to top-level
+ The arch-specific flags are only used by the arch-specific modules,
+ not the common/ files, so we can delete them too.
+
+ sim: lm32: move arch-specific file compilation to top-level
+
+ sim: iq2000: move arch-specific file compilation to top-level
+
+ sim: h8300: move arch-specific file compilation to top-level
+
+ sim: ft32: move arch-specific file compilation to top-level
+
+ sim: frv: move arch-specific file compilation to top-level
+ The arch-specific flags are only used by the arch-specific modules,
+ not the common/ files, so we can delete them too.
+
+ sim: example-synacor: move arch-specific file compilation to top-level
+
+ sim: erc32: move arch-specific file compilation to top-level
+ The arch-specific flags are only used by the arch-specific modules,
+ not the common/ files, so we can delete them too.
+
+ sim: d10v: move arch-specific file compilation to top-level
+
+ sim: cris: move arch-specific file compilation to top-level
+
+ sim: cr16: move arch-specific file compilation to top-level
+
+ sim: bfin: move arch-specific file compilation to top-level
+ The arch-specific flags are only used by the arch-specific modules,
+ not the common/ files, so we can delete them too.
+
+ sim: bpf: move arch-specific file compilation to top-level
+ We can drop the arch-specific rules from the subdir as they're no
+ longer used.
+
+ sim: avr: move arch-specific file compilation to top-level
+
+ sim: arm: move arch-specific file compilation to top-level
+ The arch-specific flags are only used by the arch-specific modules,
+ not the common/ files, so we can delete them too.
+
+ sim: aarch64: move arch-specific file compilation to top-level
+
+ sim: build: add basic framework for compiling arch objects in top-level
+ The code so far has been assuming that we only compile common/ objects.
+ Now that we're ready to compile arch-specific objects, refactor some of
+ the flags & checks a bit to support both.
+
+ sim: modules.c: move generation to top-level
+ Now that all arches create libsim.a from the top-level, we have full
+ access to their inputs, and can move the actual generation from the
+ subdir up to the top-level. This avoids recursive makes and will
+ help simplify state passing between the two.
+
+ sim: build: drop common/nrun.o subdir hack
+ Now that all the subdirs handle their own builds, we can drop this
+ common rule as it's unused, and we don't want to use it anymore.
+
+ sim: build: drop support for creating libsim.a in subdirs
+ Now that all ports have moved to creating libsim.a in the top-level,
+ drop all the support code to create it in a subdir.
+
+2023-01-10 Mike Frysinger <vapier@gentoo.org>
+
+ sim: v850: move libsim.a creation to top-level
+ The objects are still compiled in the subdir, but the creation of the
+ archive itself is in the top-level. This is a required step before we
+ can move compilation itself up, and makes it easier to review.
+
+ The downside is that each object compile is a recursive make instead of
+ a single one. On my 4 core system, it adds ~100msec to the build per
+ port, so it's not great, but it shouldn't be a big deal. This will go
+ away of course once the top-level compiles objects.
+
+2023-01-10 Mike Frysinger <vapier@gentoo.org>
+
+ sim: sh: move libsim.a creation to top-level
+ The objects are still compiled in the subdir, but the creation of the
+ archive itself is in the top-level. This is a required step before we
+ can move compilation itself up, and makes it easier to review.
+
+ The downside is that each object compile is a recursive make instead of
+ a single one. On my 4 core system, it adds ~100msec to the build per
+ port, so it's not great, but it shouldn't be a big deal. This will go
+ away of course once the top-level compiles objects.
+
+2023-01-10 Mike Frysinger <vapier@gentoo.org>
+
+ sim: rx: move libsim.a creation to top-level
+ The objects are still compiled in the subdir, but the creation of the
+ archive itself is in the top-level. This is a required step before we
+ can move compilation itself up, and makes it easier to review.
+
+ The downside is that each object compile is a recursive make instead of
+ a single one. On my 4 core system, it adds ~100msec to the build per
+ port, so it's not great, but it shouldn't be a big deal. This will go
+ away of course once the top-level compiles objects.
+
+2023-01-10 Mike Frysinger <vapier@gentoo.org>
+
+ sim: rl78: move libsim.a creation to top-level
+ The objects are still compiled in the subdir, but the creation of the
+ archive itself is in the top-level. This is a required step before we
+ can move compilation itself up, and makes it easier to review.
+
+ The downside is that each object compile is a recursive make instead of
+ a single one. On my 4 core system, it adds ~100msec to the build per
+ port, so it's not great, but it shouldn't be a big deal. This will go
+ away of course once the top-level compiles objects.
+
+2023-01-10 Mike Frysinger <vapier@gentoo.org>
+
+ sim: riscv: move libsim.a creation to top-level
+ The objects are still compiled in the subdir, but the creation of the
+ archive itself is in the top-level. This is a required step before we
+ can move compilation itself up, and makes it easier to review.
+
+ The downside is that each object compile is a recursive make instead of
+ a single one. On my 4 core system, it adds ~100msec to the build per
+ port, so it's not great, but it shouldn't be a big deal. This will go
+ away of course once the top-level compiles objects.
+
+2023-01-10 Mike Frysinger <vapier@gentoo.org>
+
+ sim: pru: move libsim.a creation to top-level
+ The objects are still compiled in the subdir, but the creation of the
+ archive itself is in the top-level. This is a required step before we
+ can move compilation itself up, and makes it easier to review.
+
+ The downside is that each object compile is a recursive make instead of
+ a single one. On my 4 core system, it adds ~100msec to the build per
+ port, so it's not great, but it shouldn't be a big deal. This will go
+ away of course once the top-level compiles objects.
+
+2023-01-10 Mike Frysinger <vapier@gentoo.org>
+
+ sim: or1k: move libsim.a creation to top-level
+ The objects are still compiled in the subdir, but the creation of the
+ archive itself is in the top-level. This is a required step before we
+ can move compilation itself up, and makes it easier to review.
+
+ The downside is that each object compile is a recursive make instead of
+ a single one. On my 4 core system, it adds ~100msec to the build per
+ port, so it's not great, but it shouldn't be a big deal. This will go
+ away of course once the top-level compiles objects.
+
+2023-01-10 Mike Frysinger <vapier@gentoo.org>
+
+ sim: msp430: move libsim.a creation to top-level
+ The objects are still compiled in the subdir, but the creation of the
+ archive itself is in the top-level. This is a required step before we
+ can move compilation itself up, and makes it easier to review.
+
+ The downside is that each object compile is a recursive make instead of
+ a single one. On my 4 core system, it adds ~100msec to the build per
+ port, so it's not great, but it shouldn't be a big deal. This will go
+ away of course once the top-level compiles objects.
+
+2023-01-10 Mike Frysinger <vapier@gentoo.org>
+
+ sim: moxie: move libsim.a creation to top-level
+ The objects are still compiled in the subdir, but the creation of the
+ archive itself is in the top-level. This is a required step before we
+ can move compilation itself up, and makes it easier to review.
+
+ The downside is that each object compile is a recursive make instead of
+ a single one. On my 4 core system, it adds ~100msec to the build per
+ port, so it's not great, but it shouldn't be a big deal. This will go
+ away of course once the top-level compiles objects.
+
+2023-01-10 Mike Frysinger <vapier@gentoo.org>
+
+ sim: mn10300: move libsim.a creation to top-level
+ The objects are still compiled in the subdir, but the creation of the
+ archive itself is in the top-level. This is a required step before we
+ can move compilation itself up, and makes it easier to review.
+
+ The downside is that each object compile is a recursive make instead of
+ a single one. On my 4 core system, it adds ~100msec to the build per
+ port, so it's not great, but it shouldn't be a big deal. This will go
+ away of course once the top-level compiles objects.
+
+2023-01-10 Mike Frysinger <vapier@gentoo.org>
+
+ sim: mips: move libsim.a creation to top-level
+ The objects are still compiled in the subdir, but the creation of the
+ archive itself is in the top-level. This is a required step before we
+ can move compilation itself up, and makes it easier to review.
+
+ The downside is that each object compile is a recursive make instead of
+ a single one. On my 4 core system, it adds ~100msec to the build per
+ port, so it's not great, but it shouldn't be a big deal. This will go
+ away of course once the top-level compiles objects.
+
+ The mips code is a little more tricky than others because, for multi-run
+ targets, it generates the list of sources & objects on the fly in the
+ configure script.
+
+2023-01-10 Mike Frysinger <vapier@gentoo.org>
+
+ sim: microblaze: move libsim.a creation to top-level
+ The objects are still compiled in the subdir, but the creation of the
+ archive itself is in the top-level. This is a required step before we
+ can move compilation itself up, and makes it easier to review.
+
+ The downside is that each object compile is a recursive make instead of
+ a single one. On my 4 core system, it adds ~100msec to the build per
+ port, so it's not great, but it shouldn't be a big deal. This will go
+ away of course once the top-level compiles objects.
+
+2023-01-10 Mike Frysinger <vapier@gentoo.org>
+
+ sim: mcore: move libsim.a creation to top-level
+ The objects are still compiled in the subdir, but the creation of the
+ archive itself is in the top-level. This is a required step before we
+ can move compilation itself up, and makes it easier to review.
+
+ The downside is that each object compile is a recursive make instead of
+ a single one. On my 4 core system, it adds ~100msec to the build per
+ port, so it's not great, but it shouldn't be a big deal. This will go
+ away of course once the top-level compiles objects.
+
+2023-01-10 Mike Frysinger <vapier@gentoo.org>
+
+ sim: m68hc11: move libsim.a creation to top-level
+ The objects are still compiled in the subdir, but the creation of the
+ archive itself is in the top-level. This is a required step before we
+ can move compilation itself up, and makes it easier to review.
+
+ The downside is that each object compile is a recursive make instead of
+ a single one. On my 4 core system, it adds ~100msec to the build per
+ port, so it's not great, but it shouldn't be a big deal. This will go
+ away of course once the top-level compiles objects.
+
+2023-01-10 Mike Frysinger <vapier@gentoo.org>
+
+ sim: m32r: move libsim.a creation to top-level
+ The objects are still compiled in the subdir, but the creation of the
+ archive itself is in the top-level. This is a required step before we
+ can move compilation itself up, and makes it easier to review.
+
+ The downside is that each object compile is a recursive make instead of
+ a single one. On my 4 core system, it adds ~100msec to the build per
+ port, so it's not great, but it shouldn't be a big deal. This will go
+ away of course once the top-level compiles objects.
+
+2023-01-10 Mike Frysinger <vapier@gentoo.org>
+
+ sim: m32c: move libsim.a creation to top-level
+ The objects are still compiled in the subdir, but the creation of the
+ archive itself is in the top-level. This is a required step before we
+ can move compilation itself up, and makes it easier to review.
+
+ The downside is that each object compile is a recursive make instead of
+ a single one. On my 4 core system, it adds ~100msec to the build per
+ port, so it's not great, but it shouldn't be a big deal. This will go
+ away of course once the top-level compiles objects.
+
+2023-01-10 Mike Frysinger <vapier@gentoo.org>
+
+ sim: lm32: move libsim.a creation to top-level
+ The objects are still compiled in the subdir, but the creation of the
+ archive itself is in the top-level. This is a required step before we
+ can move compilation itself up, and makes it easier to review.
+
+ The downside is that each object compile is a recursive make instead of
+ a single one. On my 4 core system, it adds ~100msec to the build per
+ port, so it's not great, but it shouldn't be a big deal. This will go
+ away of course once the top-level compiles objects.
+
+2023-01-10 Mike Frysinger <vapier@gentoo.org>
+
+ sim: iq2000: move libsim.a creation to top-level
+ The objects are still compiled in the subdir, but the creation of the
+ archive itself is in the top-level. This is a required step before we
+ can move compilation itself up, and makes it easier to review.
+
+ The downside is that each object compile is a recursive make instead of
+ a single one. On my 4 core system, it adds ~100msec to the build per
+ port, so it's not great, but it shouldn't be a big deal. This will go
+ away of course once the top-level compiles objects.
+
+2023-01-10 Mike Frysinger <vapier@gentoo.org>
+
+ sim: h8300: move libsim.a creation to top-level
+ The objects are still compiled in the subdir, but the creation of the
+ archive itself is in the top-level. This is a required step before we
+ can move compilation itself up, and makes it easier to review.
+
+ The downside is that each object compile is a recursive make instead of
+ a single one. On my 4 core system, it adds ~100msec to the build per
+ port, so it's not great, but it shouldn't be a big deal. This will go
+ away of course once the top-level compiles objects.
+
+2023-01-10 Mike Frysinger <vapier@gentoo.org>
+
+ sim: ft32: move libsim.a creation to top-level
+ The objects are still compiled in the subdir, but the creation of the
+ archive itself is in the top-level. This is a required step before we
+ can move compilation itself up, and makes it easier to review.
+
+ The downside is that each object compile is a recursive make instead of
+ a single one. On my 4 core system, it adds ~100msec to the build per
+ port, so it's not great, but it shouldn't be a big deal. This will go
+ away of course once the top-level compiles objects.
+
+2023-01-10 Mike Frysinger <vapier@gentoo.org>
+
+ sim: frv: move libsim.a creation to top-level
+ The objects are still compiled in the subdir, but the creation of the
+ archive itself is in the top-level. This is a required step before we
+ can move compilation itself up, and makes it easier to review.
+
+ The downside is that each object compile is a recursive make instead of
+ a single one. On my 4 core system, it adds ~100msec to the build per
+ port, so it's not great, but it shouldn't be a big deal. This will go
+ away of course once the top-level compiles objects.
+
+2023-01-10 Mike Frysinger <vapier@gentoo.org>
+
+ sim: example-synacor: move libsim.a creation to top-level
+ The objects are still compiled in the subdir, but the creation of the
+ archive itself is in the top-level. This is a required step before we
+ can move compilation itself up, and makes it easier to review.
+
+ The downside is that each object compile is a recursive make instead of
+ a single one. On my 4 core system, it adds ~100msec to the build per
+ port, so it's not great, but it shouldn't be a big deal. This will go
+ away of course once the top-level compiles objects.
+
+2023-01-10 Mike Frysinger <vapier@gentoo.org>
+
+ sim: erc32: move libsim.a creation to top-level
+ The objects are still compiled in the subdir, but the creation of the
+ archive itself is in the top-level. This is a required step before we
+ can move compilation itself up, and makes it easier to review.
+
+ The downside is that each object compile is a recursive make instead of
+ a single one. On my 4 core system, it adds ~100msec to the build per
+ port, so it's not great, but it shouldn't be a big deal. This will go
+ away of course once the top-level compiles objects.
+
+2023-01-10 Mike Frysinger <vapier@gentoo.org>
+
+ sim: d10v: move libsim.a creation to top-level
+ The objects are still compiled in the subdir, but the creation of the
+ archive itself is in the top-level. This is a required step before we
+ can move compilation itself up, and makes it easier to review.
+
+ The downside is that each object compile is a recursive make instead of
+ a single one. On my 4 core system, it adds ~100msec to the build per
+ port, so it's not great, but it shouldn't be a big deal. This will go
+ away of course once the top-level compiles objects.
+
+2023-01-10 Mike Frysinger <vapier@gentoo.org>
+
+ sim: cris: move libsim.a creation to top-level
+ The objects are still compiled in the subdir, but the creation of the
+ archive itself is in the top-level. This is a required step before we
+ can move compilation itself up, and makes it easier to review.
+
+ The downside is that each object compile is a recursive make instead of
+ a single one. On my 4 core system, it adds ~100msec to the build per
+ port, so it's not great, but it shouldn't be a big deal. This will go
+ away of course once the top-level compiles objects.
+
+2023-01-10 Mike Frysinger <vapier@gentoo.org>
+
+ sim: cr16: move libsim.a creation to top-level
+ The objects are still compiled in the subdir, but the creation of the
+ archive itself is in the top-level. This is a required step before we
+ can move compilation itself up, and makes it easier to review.
+
+ The downside is that each object compile is a recursive make instead of
+ a single one. On my 4 core system, it adds ~100msec to the build per
+ port, so it's not great, but it shouldn't be a big deal. This will go
+ away of course once the top-level compiles objects.
+
+2023-01-10 Mike Frysinger <vapier@gentoo.org>
+
+ sim: bpf: move libsim.a creation to top-level
+ The objects are still compiled in the subdir, but the creation of the
+ archive itself is in the top-level. This is a required step before we
+ can move compilation itself up, and makes it easier to review.
+
+ The downside is that each object compile is a recursive make instead of
+ a single one. On my 4 core system, it adds ~100msec to the build per
+ port, so it's not great, but it shouldn't be a big deal. This will go
+ away of course once the top-level compiles objects.
+
+2023-01-10 Mike Frysinger <vapier@gentoo.org>
+
+ sim: bfin: move libsim.a creation to top-level
+ The objects are still compiled in the subdir, but the creation of the
+ archive itself is in the top-level. This is a required step before we
+ can move compilation itself up, and makes it easier to review.
+
+ The downside is that each object compile is a recursive make instead of
+ a single one. On my 4 core system, it adds ~100msec to the build per
+ port, so it's not great, but it shouldn't be a big deal. This will go
+ away of course once the top-level compiles objects.
+
+2023-01-10 Mike Frysinger <vapier@gentoo.org>
+
+ sim: avr: move libsim.a creation to top-level
+ The objects are still compiled in the subdir, but the creation of the
+ archive itself is in the top-level. This is a required step before we
+ can move compilation itself up, and makes it easier to review.
+
+ The downside is that each object compile is a recursive make instead of
+ a single one. On my 4 core system, it adds ~100msec to the build per
+ port, so it's not great, but it shouldn't be a big deal. This will go
+ away of course once the top-level compiles objects.
+
+2023-01-10 Mike Frysinger <vapier@gentoo.org>
+
+ sim: arm: move libsim.a creation to top-level
+ The objects are still compiled in the subdir, but the creation of the
+ archive itself is in the top-level. This is a required step before we
+ can move compilation itself up, and makes it easier to review.
+
+ The downside is that each object compile is a recursive make instead of
+ a single one. On my 4 core system, it adds ~100msec to the build per
+ port, so it's not great, but it shouldn't be a big deal. This will go
+ away of course once the top-level compiles objects.
+
+2023-01-10 Mike Frysinger <vapier@gentoo.org>
+
+ sim: aarch64: move libsim.a creation to top-level
+ The objects are still compiled in the subdir, but the creation of the
+ archive itself is in the top-level. This is a required step before we
+ can move compilation itself up, and makes it easier to review.
+
+ The downside is that each object compile is a recursive make instead of
+ a single one. On my 4 core system, it adds ~100msec to the build per
+ port, so it's not great, but it shouldn't be a big deal. This will go
+ away of course once the top-level compiles objects.
+
+2023-01-10 Mike Frysinger <vapier@gentoo.org>
+
+ sim: build: drop support for subdir extra deps
+ Nothing uses this hook anymore, so punt it. It was largely used to
+ track generated files (which we do in the top-level now) and extra
+ header files (which we use automake depgen for now).
+
+2023-01-10 Mike Frysinger <vapier@gentoo.org>
+
+ sim: modules: trigger generation from top-level
+ Add rules for tracking generated subdir modules.c files. This doesn't
+ actually generate the file from the top-level, but allows us to add
+ rules that need to be ordered wrt it. Once those changes land, we can
+ rework this to actually generate from the top-level.
+
+ This currently builds off of the objects that go into the libsim.a as
+ we don't build those from the top-level either. Once we migrate that
+ up, we can switch this to the source files directly. It's a bit hacky
+ overall, but makes it easier to migrate things in smaller chunks, and
+ we aren't going to keep this logic long term.
+
+2023-01-10 Aaron Merey <amerey@redhat.com>
+
+ gdb/linespec.c: Fix missing source file during breakpoint re-set
+ During breakpoint re-setting, the source_filename of an
+ explicit_location_spec is used to lookup the symtabs associated with
+ the breakpoint being re-set. This source_filename is compared with each
+ known symtab filename in order to retrieve the breakpoint's symtabs.
+
+ However the source_filename may have been originally copied from a
+ symtab's fullname (the path where GDB found the source file) when the
+ breakpoint was first created. If a breakpoint symtab's filename and
+ fullname differ and there is no substitute-path rule that converts the
+ fullname to the filename, this will cause a NOT_FOUND_ERROR to be thrown
+ during re-setting.
+
+ Fix this by using a symtab's filename to set the explicit_location_spec
+ source_filename instead of the symtab's fullname.
+
+2023-01-10 Aaron Merey <amerey@redhat.com>
+
+ gdb/linespec.c: Fix -Wmaybe-uninitialized warning
+ Although the bool want_start_sal isn't actually used without being assigned
+ a value, initialize it to be false in order to prevent the following
+ -Wmaybe-uninitialized warning:
+
+ linespec.c: In function ‘void minsym_found(linespec_state*, objfile*, minimal_symbol*, std::vector<symtab_and_line>*)’:
+ linespec.c:4150:19: warning: ‘want_start_sal’ may be used uninitialized [-Wmaybe-uninitialized]
+ 4150 | if (is_function && want_start_sal)
+
+2023-01-10 GDB Administrator <gdbadmin@sourceware.org>
+
+ Automatic date update in version.in
+
+2023-01-09 Alan Modra <amodra@gmail.com>
+
+ Set dwarf2 stash pointer earlier
+ This fixes a memory leak in the vanishingly rare cases (found by
+ fuzzers of course) when something goes wrong in the save_section_vma,
+ htab_create_alloc or alloc_trie_leaf calls before *pinfo is written.
+ If *pinfo is not written, _bfd_dwarf2_cleanup_debug_info won't be able
+ to free that memory.
+
+ * dwarf2.c (_bfd_dwarf2_slurp_debug_info): Save stash pointer
+ on setting up stash.
+
+2023-01-09 Alan Modra <amodra@gmail.com>
+
+ peXXigen.c sanity checks
+ Also fix a memory leak, and make some style changes. I tend to read
+ (sizeof * x) as a multiplication of two variables, which I would not
+ do if binutils followed the gcc coding conventions consistently (see
+ https://gcc.gnu.org/codingconventions.html#Expressions). (sizeof *x)
+ looks a lot better to me, or even (sizeof (*x)) which I've used here.
+
+ * peXXigen.c (get_contents_sanity_check): New function.
+ (pe_print_idata): Use it here..
+ (pe_print_edata): ..and here. Free data on error return.
+ (rsrc_parse_entry): Check entry size read from file.
+ (rsrc_parse_entries): Style fixes.
+ (rsrc_process_section): Use bfd_malloc_and_get_section.
+ (_bfd_XXi_final_link_postscript): Likewise.
+
+2023-01-09 Alan Modra <amodra@gmail.com>
+
+ Move mips_refhi_list to bfd tdata
+ Similar to commit c799eddb3512, but for mips-ecoff. mips-ecoff is
+ marked obsolete, but we still allow reading of these object files in
+ a number of mips targets.
+
+ * coff-mips.c (struct mips_hi, mips_refhi_list): Delete.
+ (mips_refhi_reloc, mips_reflo_reloc): Access mips_refhi_list
+ in ecoff_data.
+ * ecoff.c (_bfd_ecoff_close_and_cleanup): New function.
+ * libecoff.h (struct mips_hi): Moved from coff-mips.c.
+ (struct ecoff_tdata): Add mips_refhi_list.
+ (_bfd_ecoff_close_and_cleanup): Declare.
+
+2023-01-09 Alan Modra <amodra@gmail.com>
+
+ Move bfd_init to bfd.c
+ init.c contains just one function that doesn't do much. Move it to
+ bfd.c and give it something to do, initialising static state. So far
+ the only initialisation is for bfd.c static variables.
+
+ The idea behind reinitialising state is to see whether some set of
+ flaky oss-fuzz crashes go away. oss-fuzz stresses binutils in ways
+ that can't occur in reality, feeding multiple testcases into the
+ internals of binutils. So one testcase may affect the result of the
+ next testcase.
+
+ * init.c: Delete file. Move bfd_init to..
+ * bfd.c (bfd_init): ..here. Init static variables.
+ * Makefile.am (BFD32_LIBS): Remove init.lo.
+ (BFD32_LIBS_CFILES, BFD_H_FILES): Remove init.c.
+ * doc/local.mk: Remove mention of init.texi and init.c.
+ * Makefile.in: Regenerate.
+ * bfd-in2.h: Regenerate.
+ * po/SRC-POTFILES.in: Regenerate.
+
+2023-01-09 Tom Tromey <tom@tromey.com>
+
+ Fix crash with C++ qualified names
+ PR c++/29503 points out that something like "b->Base::member" will
+ crash when 'b' does not have pointer type. This seems to be a simple
+ oversight in eval_op_member.
+
+ Bug: https://sourceware.org/bugzilla/show_bug.cgi?id=29503
+ Reviewed-By: Bruno Larsen <blarsen@redhat.com>
+
+2023-01-09 Simon Marchi <simon.marchi@polymtl.ca>
+
+ gdb/doc: fix @code{GDBN} -> @value{GDBN}
+ Change-Id: I928d6f8d6e6bc41d8c7ddbfae8f6ae0614f4993e
+
+2023-01-09 Christophe Lyon <christophe.lyon@arm.com>
+
+ Skip ld/pr23169 test on arm.
+ The test is already skipped on several targets (including AArch64)
+ because it's invalid.
+
+ * testsuite/ld-ifunc/ifunc.exp: Skip pr23169 on arm.
+
+2023-01-09 Christophe Lyon <christophe.lyon@arm.com>
+
+ Fix PR18841 ifunc relocation ordering
+ In order to get the ifunc relocs properly sorted the correct class
+ needs to be returned. The code mimics what has been done for AArch64.
+
+ Fixes:
+ FAIL: Run pr18841 with libpr18841b.so
+ FAIL: Run pr18841 with libpr18841c.so
+ FAIL: Run pr18841 with libpr18841bn.so (-z now)
+ FAIL: Run pr18841 with libpr18841cn.so (-z now)
+
+ bfd/
+ PR ld/18841
+ * elf32-arm.c (elf32_arm_reloc_type_class): Return
+ reloc_class_ifunc for ifunc symbols.
+
+ ld/testsuite/
+ * ld-arm/ifunc-12.rd: Update relocations order.
+ * ld-arm/ifunc-3.rd: Likewise.
+ * ld-arm/ifunc-4.rd: Likewise.
+
+2023-01-09 Nick Clifton <nickc@redhat.com>
+
+ Updated transaltions for the gprof and binutils sub-directories
+
+2023-01-09 Tankut Baris Aktemur <tankut.baris.aktemur@intel.com>
+
+ testsuite: add -O0 to Intel compilers if no 'optimize' option is given
+ icpx/icx give the following warning if '-g' is used without '-O'.
+
+ icpx: remark: Note that use of '-g' without any optimization-level
+ option will turn off most compiler optimizations similar to use of
+ '-O0'; use '-Rno-debug-disables-optimization' to disable this
+ remark [-Rdebug-disables-optimization]
+
+ The warning makes dejagnu think that compilation has failed. E.g.:
+
+ $ make check TESTS="gdb.cp/local.exp" RUNTESTFLAGS="CXX_FOR_TARGET='icpx' CC_FOR_TARGET=icx"
+ ...
+ gdb compile failed, icpx: remark: Note that use of '-g' without any optimization-level option will turn off most compiler optimizations similar to use of '-O0'; use '-Rno-debug-disables-optimization' to disable this remark [-Rdebug-disables-optimization]
+
+ === gdb Summary ===
+
+ # of untested testcases 1
+
+ Furthermore, if no -O flag is passed, icx/icc optimize
+ the code by default. This breaks assumptions in many GDB tests
+ that the code is unoptimized by default. E.g.:
+
+ $ make check TESTS="gdb.cp/cmpd-minsyms.exp" RUNTESTFLAGS="CXX_FOR_TARGET='icpx' CC_FOR_TARGET=icx"
+ ...
+ FAIL: gdb.cp/cmpd-minsyms.exp: gdb_breakpoint: set breakpoint at 'GDB<int>::a() const'
+ FAIL: gdb.cp/cmpd-minsyms.exp: gdb_breakpoint: set breakpoint at 'GDB<int>::b() volatile'
+ FAIL: gdb.cp/cmpd-minsyms.exp: gdb_breakpoint: set breakpoint at 'GDB<int>::c() const volatile'
+ FAIL: gdb.cp/cmpd-minsyms.exp: gdb_breakpoint: set breakpoint at GDB<int>::operator ==
+ FAIL: gdb.cp/cmpd-minsyms.exp: gdb_breakpoint: set breakpoint at GDB<int>::operator==(GDB<int> const&)
+ FAIL: gdb.cp/cmpd-minsyms.exp: gdb_breakpoint: set breakpoint at GDB<char>::harder(char)
+ FAIL: gdb.cp/cmpd-minsyms.exp: gdb_breakpoint: set breakpoint at GDB<int>::harder(int)
+ FAIL: gdb.cp/cmpd-minsyms.exp: gdb_breakpoint: set breakpoint at "int GDB<char>::even_harder<int>(char)"
+ FAIL: gdb.cp/cmpd-minsyms.exp: gdb_breakpoint: set breakpoint at GDB<int>::simple()
+
+ === gdb Summary ===
+
+ # of expected passes 1
+ # of unexpected failures 9
+
+ To fix both problems, pass the -O0 flag explicitly, if no optimization
+ option is given.
+
+ With this patch we get, e.g.:
+
+ $ make check TESTS="gdb.cp/cmpd-minsyms.exp gdb.cp/local.exp" RUNTESTFLAGS="CXX_FOR_TARGET='icpx' CC_FOR_TARGET=icx"
+ ...
+ === gdb Summary ===
+
+ # of expected passes 19
+ # of known failures 1
+
+ Approved-By: Tom Tromey <tom@tromey.com>
+
+2023-01-09 Nils-Christian Kempke <nils-christian.kempke@intel.com>
+
+ testsuite: handle icc and icpc deprecated remarks
+ Starting with icc/icpc version 2021.7.0 and higher both compilers emit a
+ deprecation remark when used. E.g.
+
+ >> icc --version
+ icc: remark #10441: The Intel(R) C++ Compiler Classic (ICC) is
+ deprecated and will be removed from product release in the second half
+ of 2023. The Intel(R) oneAPI DPC++/C++ Compiler (ICX) is the recommended
+ compiler moving forward. Please transition to use this compiler. Use
+ '-diag-disable=10441' to disable this message.
+ icc (ICC) 2021.7.0 20220713
+ Copyright (C) 1985-2022 Intel Corporation. All rights reserved.
+
+ >> icpc --version
+ icpc: remark #10441: The Intel(R) C++ Compiler Classic (ICC) is
+ deprecated ...
+ icpc (ICC) 2021.7.0 20220720
+ Copyright (C) 1985-2022 Intel Corporation. All rights reserved.
+
+ As the testsuite compile fails when unexpected output by the compiler is
+ seen this change in the compiler breaks all existing icc and icpc tests.
+ This patch makes the gdb testsuite more forgiving by a) allowing the
+ output of the remark when trying to figure out the compiler version
+ and by b) adding '-diag-disable=10441' to the compile command whenever
+ gdb_compile is called without the intention to detect the compiler.
+
+ Approved-By: Tom Tromey <tom@tromey.com>
+
+2023-01-09 GDB Administrator <gdbadmin@sourceware.org>
+
+ Automatic date update in version.in
+
+2023-01-08 Alan Modra <amodra@gmail.com>
+
+ PR29972, inconsistent format specification in singular form
+ PR 29972
+ * readelf.c (process_dynamic_section): Correct format string.
+
+2023-01-08 GDB Administrator <gdbadmin@sourceware.org>
+
+ Automatic date update in version.in
+
+2023-01-07 GDB Administrator <gdbadmin@sourceware.org>
+
+ Automatic date update in version.in
+
+2023-01-06 Indu Bhagat <indu.bhagat@oracle.com>
+
+ sframe: fix the defined SFRAME_FRE_TYPE_*_LIMIT constants
+ An earlier commit 3f107464 defined the SFRAME_FRE_TYPE_*_LIMIT
+ constants. These constants are used (by gas and libsframe) to pick an
+ SFrame FRE type based on the function size. Those constants, however,
+ were buggy, causing the generated SFrame sections to be bloated as
+ SFRAME_FRE_TYPE_ADDR2/SFRAME_FRE_TYPE_ADDR4 got chosen more often than
+ necessary.
+
+ gas/
+ * sframe-opt.c (sframe_estimate_size_before_relax): Use
+ typecast.
+ (sframe_convert_frag): Likewise.
+
+ libsframe/
+ * sframe.c (sframe_calc_fre_type): Use a more appropriate type
+ for argument. Adjust the check for SFRAME_FRE_TYPE_ADDR4_LIMIT
+ to keep it warning-free but meaningful.
+
+ include/
+ * sframe-api.h (sframe_calc_fre_type): Use a more appropriate
+ type for the argument.
+ * sframe.h (SFRAME_FRE_TYPE_ADDR1_LIMIT): Correct the constant.
+ (SFRAME_FRE_TYPE_ADDR2_LIMIT): Likewise.
+ (SFRAME_FRE_TYPE_ADDR4_LIMIT): Likewise.
+
+2023-01-06 Indu Bhagat <indu.bhagat@oracle.com>
+
+ libsframe: adjust an incorrect check in flip_sframe
+ When sframe_encoder_write needs to flip the buffer containing the SFrame
+ section before writing, it is not necessary that the SFrame FDES are in
+ the order of their sfde_func_start_fre_off. On the contrary, SFrame
+ FDEs will be sorted in the order of their start address. So, remove
+ this incorrect assumption which is basically assuming that the last
+ sfde_func_start_fre_off seen will help determine the end of the flipped
+ buffer.
+
+ The function now keeps track of the bytes_flipped and then compares it with
+ the expected value. Also, added two more checks at appropriate places:
+ - check that the SFrame FDE read is within bounds
+ - check that the SFrame FRE read is within bounds
+
+ libsframe/
+
+ * sframe.c (flip_sframe): Adjust an incorrect check.
+ Add other checks to ensure reads are within the buffer size.
+
+2023-01-06 Jan Beulich <jbeulich@suse.com>
+
+ ld: yet another PDB build fix (or workaround)
+ Older bash looks to improperly deal with backslashes in here-documents,
+ leaving them in place on the escaped double quotes inside the parameter
+ expansion. Convert to a model without using such a construct, by simply
+ splitting the here-documents into three ones.
+
+2023-01-06 Nick Clifton <nickc@redhat.com>
+
+ Updated Bulgarian and Russian translations for LD and BFD respectively
+
+2023-01-06 Alan Modra <amodra@gmail.com>
+
+ Fix an aout memory leak
+ * aoutx.h (aout_bfd_free_cached_info): Free line_buf.
+
+ Tidy pe flag in coff_data
+ Make it a bool, use obj_pe accessor everywhere.
+
+2023-01-06 Alan Modra <amodra@gmail.com>
+
+ Make coff backend data read-only
+ The bfd_coff_backend_data struct should be read-only, the only thing
+ preventing this is that objcopy writes to one of the fields,
+ _bfd_coff_long_section_names. This patch creates a copy of the field
+ in bfd coff_obj_tdata, which makes more sense anyway. When enabling
+ long section names the intent is to do so for a particular bfd, not
+ for all bfds that might happen to be using the target xvec.
+
+ bfd/
+ * coffcode.h: Update coff long section name comment.
+ (bfd_coff_set_long_section_names_allowed): Use macro accessor
+ to set flag.
+ (bfd_coff_set_long_section_names_disallowed): Tidy.
+ (coff_backend_info): Return a const pointer.
+ (bfd_coff_std_swap_table, ticoff0_swap_table, ticoff1_swap_table),
+ (bigobj_swap_table): Make const.
+ (bfd_coff_long_section_names): Use tdata copy.
+ (coff_mkobject): Set long_section_names from coff_backend_info.
+ * coff-go32.c (_bfd_go32_mkobject): Likewise.
+ * peicode.h (pe_mkobject): Likewise.
+ * coff-sh.c (bfd_coff_small_swap_table): Make const.
+ * libcoff-in.h (struct coff_tdata): Add long_section_names,
+ reorder fields.
+ * libcoff.h: Regenerate.
+ binutils/
+ * objcopy.c (set_long_section_mode): Move earlier in file.
+ (copy_object): Call set_long_section_mode here, after setting
+ output format.
+ (copy_file): Don't call set_long_section_mode.
+
+2023-01-06 Bruno Larsen <blarsen@redhat.com>
+
+ gdb/c++: Detect ambiguous variables in imported namespaces
+ When running gdb.cp/nsusing.cc and stopping at line 17, we can ask GDB
+ to print x and get a compiler-dependent answer. Using gcc 12.2.1, GDB
+ will print M::x, and using clang 16.0.0 prints N::x. Not only is this
+ behavior confusing to users, it is also not consistent with compiler
+ behaviors, which would warn that using x is ambiguous at this point.
+
+ This commit makes GDB behavior consistent with compilers. it achieves
+ this by making it so instead of exiting early when finding any symbol
+ with the correct name, GDB continues searching through all include
+ directives, storing all matching symbols in a relational map betwen the
+ mangled name and the found symbols.
+
+ If the resulting map has more than one entry, GDB says that the
+ reference is ambiguous and lists all possibilities. Otherwise it returns
+ the block_symbol structure for the desired symbol, or an empty struct if
+ nothing was found.
+
+ The commit also changes gdb.cp/nsusing.exp to test the ambiguous
+ detection.
+
+2023-01-06 Bruno Larsen <blarsen@redhat.com>
+
+ gdb/mi: add no-history stop reason
+ When executing in reverse and runs out of recorded history, GDB prints
+ a warning to the user, but does not add a reason in the stopped record,
+ for example:
+
+ *stopped,frame={addr="0x000000000040113e",func="main",args=[],file="/home/blarsen/Documents/fsf_build/gdb/testsuite/../../../binutils-gdb/gdb/testsuite/gdb.reverse/solib-reverse.c",fullname="/home/blarsen/Documents/binutils-gdb/gdb/testsuite/gdb.reverse/solib-reverse.c",line="27",arch="i386:x86-64"},thread-id="1",stopped-threads="all",core="1"
+
+ This problem was reported as record/29260.
+
+ This commit adds the reason no-history to the record, making it easier
+ for interfaces using the mi interpreter to report the result. It also
+ changes the test gdb.mi/mi-reverse.exp to test that the reason shows up
+ correctly.
+
+ Bug: https://sourceware.org/bugzilla/show_bug.cgi?id=29260
+
+2023-01-06 Bruno Larsen <blarsen@redhat.com>
+
+ gdb/testsuite: Fix FAILs in gdb.linespec/cpcompletion.exp when using clang
+ When using clang 16.0.0 to test gdb.linespec/cpcompletion.exp, I get 99
+ unexpected failures. They all fail to produce a complete list of
+ completion options for a function, either overload2_function,
+ overload3_function or anon_ns_function. This happens because clang is
+ optimizing them away, since they are never used.
+
+ Fix this by adding __attribute__((used)) to all declarations to the
+ aforementioned functions.
+
+2023-01-06 Clément Chigot <chigot@adacore.com>
+
+ configure: remove dependencies on gmp and mpfr when gdb is disabled
+ Since 991180627851801f1999d1ebbc0e569a17e47c74, the configure checks
+ about GMP and MPFR for gdb builds have been moved to the toplevel
+ configure.
+ However, it doesn't take into account the --disable-gdb option. Meaning
+ that a build without gdb will require these libraries even if not
+ needed.
+
+ ChangeLog:
+
+ * configure.ac: Skip GMP and MPFR when --disable-gdb is
+ provided.
+ * configure: Regenerate.
+
+2023-01-06 GDB Administrator <gdbadmin@sourceware.org>
+
+ Automatic date update in version.in
+
+2023-01-05 Simon Marchi <simon.marchi@polymtl.ca>
+
+ gdbsupport: fix scoped_debug_start_end's move constructor
+ I spotted a problem with scoped_debug_start_end's move constructor.
+ When constructing a scoped_debug_start_end through it, it doesn't
+ disable the moved-from object, meaning there are now two objects that
+ will do the side-effects of decrementing the debug_print_depth global
+ and printing the "end" message. Decrementing the debug_print_depth
+ global twice is actually problematic, because the increments and
+ decrements get out of sync, meaning we should hit this assertion, in
+ theory:
+
+ gdb_assert (debug_print_depth > 0);
+
+ However, in practice, we don't see that. This is because despite the
+ move constructor being required for this to compile:
+
+ template<typename PT>
+ static inline scoped_debug_start_end<PT &> ATTRIBUTE_NULL_PRINTF (6, 7)
+ make_scoped_debug_start_end (PT &&pred, const char *module, const char *func,
+ const char *start_prefix,
+ const char *end_prefix, const char *fmt, ...)
+ {
+ va_list args;
+ va_start (args, fmt);
+ auto res = scoped_debug_start_end<PT &> (pred, module, func, start_prefix,
+ end_prefix, fmt, args);
+ va_end (args);
+
+ return res;
+ }
+
+ ... it is never actually called, because compilers elide the move
+ constructors all the way (the scoped_debug_start_end gets constructed
+ directly in the instance of the top-level caller). To confirm this, I
+ built GDB with -fno-elide-constructors, and now I see it:
+
+ /home/simark/src/binutils-gdb/gdb/../gdbsupport/common-debug.h:147: internal-error: ~scoped_debug_start_end: Assertion `debug_print_depth > 0' failed.
+
+ #9 0x00005614ba5f17c3 in internal_error_loc (file=0x5614b8749960 "/home/simark/src/binutils-gdb/gdb/../gdbsupport/common-debug.h", line=147, fmt=0x5614b8733fa0 "%s: Assertion `%s' failed.") at /home/simark/src/binutils-gdb/gdbsupport/errors.cc:58
+ #10 0x00005614b8e1b2e5 in scoped_debug_start_end<bool&>::~scoped_debug_start_end (this=0x7ffc6c5e7b40, __in_chrg=<optimized out>) at /home/simark/src/binutils-gdb/gdb/../gdbsupport/common-debug.h:147
+ #11 0x00005614b96dbe34 in make_scoped_debug_start_end<bool&> (pred=@0x5614baad7200: true, module=0x5614b891d840 "infrun", func=0x5614b891d800 "infrun_debug_show_threads", start_prefix=0x5614b891d7c0 "enter", end_prefix=0x5614b891d780 "exit", fmt=0x0) at /home/simark/src/binutils-gdb/gdb/../gdbsupport/common-debug.h:235
+
+ Fix this by adding an m_disabled field to scoped_debug_start_end, and
+ setting it in the move constructor.
+
+ Change-Id: Ie5213269c584837f751d2d11de831f45ae4a899f
+
+2023-01-05 Simon Marchi <simon.marchi@efficios.com>
+
+ gdbsupport: add gdb::string_view_hash
+ Add the string_view_hash type, which will be useful to be able to use
+ gdb::string_view as std::unordered_map keys.
+
+ Use it in gdb/symtab.c, to exercise it.
+
+ Change-Id: Id69a466ab19a9f6620b5df8a2dd29b5cddd94c00
+ Approved-By: Andrew Burgess <aburgess@redhat.com>
+
+2023-01-05 Simon Marchi <simon.marchi@efficios.com>
+
+ gdbsupport: move fast_hash to gdbsupport/common-utils.h
+ The following patch adds a hash type for gdb::string_view in gdbsupport,
+ which will use the fast_hash function. Move the latter to gdbsupport.
+
+ Change-Id: Id74510e17801e775bd5ffa5f443713d79adf14ad
+ Approved-By: Andrew Burgess <aburgess@redhat.com>
+
+2023-01-05 Simon Marchi <simon.marchi@efficios.com>
+
+ gdbsupport: move libxxhash configure check to gdbsupport
+ The following patch moves the fast_hash function, which uses libxxhash,
+ to gdbsupport. Move the libxxhash configure check to gdbsupport (and
+ transitively to gdbserver).
+
+ Change-Id: I242499e50c8cd6fe9f51e6e92dc53a1b3daaa96e
+ Approved-By: Andrew Burgess <aburgess@redhat.com>
+
+2023-01-05 Simon Marchi <simon.marchi@polymtl.ca>
+
+ gdb: make gdbarch_alloc take ownership of the tdep
+ It's currently not clear how the ownership of gdbarch_tdep objects
+ works. In fact, nothing ever takes ownership of it. This is mostly
+ fine because we never free gdbarch objects, and thus we never free
+ gdbarch_tdep objects. There is an exception to that however: when
+ initialization fails, we do free the gdbarch object that is not going to
+ be used, and we free the tdep too. Currently, i386 and s390 do it.
+
+ To make things clearer, change gdbarch_alloc so that it takes ownership
+ of the tdep. The tdep is thus automatically freed if the gdbarch is
+ freed.
+
+ Change all gdbarch initialization functions to pass a new gdbarch_tdep
+ object to gdbarch_alloc and then retrieve a non-owning reference from
+ the gdbarch object.
+
+ Before this patch, the xtensa architecture had a single global instance
+ of xtensa_gdbarch_tdep. Since we need to pass a dynamically allocated
+ gdbarch_tdep_base instance to gdbarch_alloc, remove this global
+ instance, and dynamically allocate one as needed, like we do for all
+ other architectures. Make the `rmap` array externally visible and
+ rename it to the less collision-prone `xtensa_rmap` name.
+
+ Change-Id: Id3d70493ef80ce4bdff701c57636f4c79ed8aea2
+ Approved-By: Andrew Burgess <aburgess@redhat.com>
+
+2023-01-05 Simon Marchi <simon.marchi@polymtl.ca>
+
+ gdb/testsuite: add back needed -re clause in gdb_breakpoint
+ Commit 4b9728be ("gdb: use gdb_test_multiple in gdb_breakpoint") caused,
+ amongst others:
+
+ (gdb) break 1^M
+ No line 1 in the current file.^M
+ Make breakpoint pending on future shared library load? (y or [n]) n^M
+ (gdb) FAIL: gdb.dwarf2/dw2-main-no-line-number.exp: gdb_breakpoint: set breakpoint at 1
+ FAIL: gdb.dwarf2/dw2-main-no-line-number.exp: !$breakpoint_at_missing_lineno_set
+
+ This is because it removed one empty -re clause (matching just the
+ prompt) that is necessary after replying "n" to the pending breakpoint
+ question. Add this clause back.
+
+ Change-Id: Ibfaa059d58bbea660bc29f0547e2f75c323fcbc6
+ Approved-By: Tom de Vries <tdevries@suse.de>
+
+2023-01-05 Tom de Vries <tdevries@suse.de>
+
+ [gdb/python] Avoid queue.SimpleQueue for python 3.6
+ On openSUSE Leap 15.4 with python 3.6, the gdb.dap/basic-dap.exp test-case
+ fails as follows:
+ ...
+ ERROR: eof reading json header
+ while executing
+ "error "eof reading json header""
+ invoked from within
+ "expect {
+ -i exp19 -timeout 10
+ -re "^Content-Length: (\[0-9\]+)\r\n" {
+ set length $expect_out(1,string)
+ exp_continue
+ }
+ -re "^(\[^\r\n\]+)..."
+ ("uplevel" body line 1)
+ invoked from within
+ "uplevel $body" NONE eof reading json header
+ UNRESOLVED: gdb.dap/basic-dap.exp: startup - initialize
+ ...
+
+ Investigation using a "catch throw" shows that:
+ ...
+ (gdb)
+ at gdb/python/py-utils.c:396
+ 396 error (_("Error occurred in Python: %s"), msg.get ());
+ (gdb) p msg.get ()
+ $1 = 0x2b91d10 "module 'queue' has no attribute 'SimpleQueue'"
+ ...
+
+ The python class queue.SimpleQueue was introduced in python 3.7.
+
+ Fix this by falling back to queue.Queue for python <= 3.6.
+
+ Tested on x86_64-linux, by successfully running the test-case:
+ ...
+ # of expected passes 47
+ ...
+
+2023-01-05 Tom Tromey <tromey@adacore.com>
+
+ Add type to expression dump of symbol
+ I recently had cause to dump some expressions from gdb. I got output
+ like this:
+
+ Operation: BINOP_GTR
+ Operation: OP_VAR_VALUE
+ Block symbol:
+ Symbol: small_value
+ Block: 0x39b4c20
+ Operation: OP_LONG
+ Operation: OP_LONG
+ Type: int
+ Constant: 0x0000000000000014
+
+ This is ok, but it would have been handy to see the type of the
+ symbol. This patch adds this information.
+
+ Reviewed-By: Bruno Larsen <blarsen@redhat.com>
+
+2023-01-05 Nick Clifton <nickc@redhat.com>
+
+ Remove Stephen Casner as the PDP11 maintainer.
+
+ Add an extra emulation called arm64pe to the aarch64pe emulation.
+
+2023-01-05 Andreas K. Huettel <dilfridge@gentoo.org>
+
+ Un xfail the PR19719 test for the AArch64 architecture
+
+2023-01-05 Nick Clifton <nickc@redhat.com>
+
+ Updated Bulgarian and Russian translations for the gprof subdirectory
+
+2023-01-05 Paul Koning <paulkoning@comcast.net>
+
+ PR29963, PDP11 link produces spurious relocation truncated messages
+ PDP11 is a 16-bit processor with 16-bit logical addresses. Therefore
+ wrapping should be allowed on the 16-bit relocs, and may as well be
+ allowed for the 32-bit reloc too.
+
+ PR 29963
+ * pdp11.c (howto_table_pdp11): Use complain_overflow_dont.
+
+2023-01-05 Mike Frysinger <vapier@gentoo.org>
+
+ sim: mips: add multi source to built sources
+ The multirun generation mode is a bit of a mess as generated run files
+ depend on generate igen files, all with unknown names ahead of time.
+ In the multirun mode, be lazy and declare all of these generated source
+ files as built sources so they'll be created early on.
+
+2023-01-05 Tsukasa OI <research_trasio@irq.a4lg.com>
+
+ sim: Move getopt checking inside SIM_AC_PLATFORM
+ This commit moves getopt declaration checker originally in sim/
+ configure.ac; added in commit 340aa4f6872c ("sim: Check known getopt
+ definition existence") to sim/m4/sim_ac_platform.m4 (inside the
+ SIM_AC_PLATFORM macro).
+
+ It also regenerates configuration files using the maintainer mode.
+
+2023-01-05 Guillermo E. Martinez <guillermo.e.martinez@oracle.com>
+
+ sim: bpf: fix testsuite due to linker warnings [PR sim/29954]
+ On a bpf-*-* testsuite fails:
+ ./ld/ld-new: warning: test has a LOAD segment with RWX permissions
+
+ Adjusting `--memory-size=10Mb' to the simulator bpf testsuite passes.
+
+ Tested on bpf-*-*:
+
+ Bug: https://sourceware.org/PR29954
+
+ sim/testsuite:
+ * bpf/allinsn.exp (SIMFLAGS_FOR_TARGET): Adjust sim flags.
+
+2023-01-05 GDB Administrator <gdbadmin@sourceware.org>
+
+ Automatic date update in version.in
+
+2023-01-04 Indu Bhagat <indu.bhagat@oracle.com>
+
+ MAINTAINERS: add myself as maintainer of libsframe
+ binutils/
+ * MAINTAINERS: Add myself as maintainer of libsframe.
+
+2023-01-04 H.J. Lu <hjl.tools@gmail.com>
+
+ x86: Remove duplicated I386_PCREL_TYPE_P/X86_64_PCREL_TYPE_P
+ I386_PCREL_TYPE_P and X86_64_PCREL_TYPE_P are defined twice. Remove
+ the duplications.
+
+ * elfxx-x86.h (I386_PCREL_TYPE_P): Remove duplication.
+ (X86_64_PCREL_TYPE_P): Likewise.
+
+2023-01-04 Lancelot SIX <lancelot.six@amd.com>
+
+ gdb: ensure test_name is initialized in gdb_breakpoint
+ A refactoring in 4b9728bec15 (gdb: use gdb_test_multiple in
+ gdb_breakpoint) left the $test_name variable undefined.
+
+ This patch fixes this.
+
+ Approved-By: Simon Marchi <simon.marchi@efficios.com>
+
+2023-01-04 Tom Tromey <tromey@adacore.com>
+
+ Use first_opcode in another spot
+ I found one place that could use expression::first_opcode.
+
+ Reviewed-By: Lancelot Six <lancelot.six@amd.com>
+
+2023-01-04 Tom Tromey <tromey@adacore.com>
+
+ Convert exp_uses_objfile to a method of expression
+ This changes the exp_uses_objfile function to be a method of
+ 'expression'.
+
+ Reviewed-By: Lancelot Six <lancelot.six@amd.com>
+
+2023-01-04 Simon Marchi <simon.marchi@polymtl.ca>
+
+ gdb: use gdb_test_multiple in gdb_breakpoint
+ When running the testsuite in a non-optimized build on a slow machine, I
+ sometimes get:
+
+ UNTESTED: gdb.gdb/selftest.exp: Cannot set breakpoint at captured_main, skipping testcase.
+
+ do_self_tests, in lib/selftest-support.exp, uses `with_timeout_factor
+ 10`, to account for the fact that reading the debug info of the gdb
+ binary (especially in a non-optimized GDB) can take time. But then it
+ ends up calling gdb_breakpoint, which uses gdb_expect with a hard-coded
+ timeout of 30 seconds.
+
+ Fix this by making gdb_breakpoint use gdb_test_multiple, which is a
+ desired change anyway for this kind of simple command / expected
+ output case.
+
+ Change-Id: I9b06ce991cc584810d8cc231b2b4893980b8be75
+ Reviewed-By: Lancelot Six <lancelot.six@amd.com>
+
+2023-01-04 Alan Modra <amodra@gmail.com>
+
+ Re: Avoid unaligned pointer reads in PEP .idata section
+ Fix testsuite fallout.
+
+ * testsuite/ld-pe/cfi.d: Adjust for changed .idata padding.
+ * testsuite/ld-pe/secidx_64.d: Likewise.
+ * testsuite/ld-pe/secrel_64.d: Likewise.
+
+2023-01-04 Alan Modra <amodra@gmail.com>
+
+ objcopy fuzzed pe out of memory
+ This occurs when attempting to read back a section from the output
+ file in _bfd_XX_bfd_copy_private_bfd_data_common. The copy of the
+ section failed size sanity checking, thus it won't be written.
+
+ * objcopy.c (copy_object): Return false if copy_section or
+ copy_relocations_in_section fails.
+
+2023-01-04 Alan Modra <amodra@gmail.com>
+
+ fuzzed file timeout
+ objcopy of archive, element containing an object with a fuzzed section
+ size far exceeding the element size. copy_section detects this, but
+ the temp file is laid out for the large section. It can take a long
+ time to write terabytes of sparse file, a waste of time when it will
+ be deleted.
+
+ * objcopy.c (copy_archive): Don't write element contents after
+ bad status result from copy_object.
+
+2023-01-04 Alan Modra <amodra@gmail.com>
+
+ asan: segv in parse_module
+ * vms-alpha.c (parse_module): Ignore DST__K_SRC_SETFILE data
+ if out of range.
+
+2023-01-04 Alan Modra <amodra@gmail.com>
+
+ addr2line out of memory on fuzzed file
+ Another case of fuzzers finding the section size sanity checks are
+ avoided with SHT_NOBITS sections.
+
+ * dwarf2.c (read_section): Check that the DWARF section being
+ read has contents.
+
+2023-01-04 Andrew Burgess <aburgess@redhat.com>
+
+ gdb: fix some #ifdef logic in bt-utils.h
+ In passing I spotted some incorrect #ifdef logic in bt-utils.h. The
+ logic in question has existed since the file was originally added in
+ commit:
+
+ commit abbbd4a3e0ca51132e7fb31a43f896d29894dae0
+ Date: Wed Aug 11 13:24:33 2021 +0100
+
+ gdb: use libbacktrace to create a better backtrace for fatal signals
+
+ The code is trying to select between using libbacktrace or using the
+ execinfo supplied backtrace API.
+
+ First we check to see if we can use libbacktrace. If we can then we
+ include some header files, and then set some defines to indicate that
+ libbacktrace is being used.
+
+ Then we check if execinfo is available, if it is then we include
+ <execinfo.h> and set some alternative defines.
+
+ In theory the second block of logic should not trigger if the first
+ block (that uses libbacktrace) has also triggered, but we incorrectly
+ check the define 'PRINT_BACKTRACE_ON_FATAL_SIGNAL' instead of checking
+ for 'GDB_PRINT_INTERNAL_BACKTRACE_USING_LIBBACKTRACE', so the second
+ block triggers more than it should. The
+ 'PRINT_BACKTRACE_ON_FATAL_SIGNAL' define is not defined anywhere, this
+ was a mistake in the original commit.
+
+ In reality this is harmless, we include <execinfo.h> when we don't
+ need too, but in by-utils.c the libbacktrace define is always checked
+ for before the execinfo define, so we never actually end up using the
+ execinfo path (when libbacktrace is available). But I figure its
+ still worth cleaning this up.
+
+ I've tested GDB in a "default" build where libbacktrace is used, and
+ when configuring with --disable-libbacktrace which causes the execinfo
+ backtrace API to be used instead, both still appear to work fine.
+
+ There should be no user visible changes after this commit.
+
+2023-01-04 Bruno Larsen <blarsen@redhat.com>
+
+ gdb: add 'maintenance print record-instruction' command
+ While chasing some reverse debugging bugs, I found myself wondering what
+ was recorded by GDB to undo and redo a certain instruction. This commit
+ implements a simple way of printing that information.
+
+ If there isn't enough history to print the desired instruction (such as
+ when the user hasn't started recording yet or when they request 2
+ instructions back but only 1 was recorded), GDB warns the user like so:
+
+ (gdb) maint print record-instruction
+ Not enough recorded history
+
+ If there is enough, GDB prints the instruction like so:
+
+ (gdb) maint print record-instruction
+ 4 bytes of memory at address 0x00007fffffffd5dc changed from: 01 00 00 00
+ Register eflags changed: [ IF ]
+ Register rip changed: (void (*)()) 0x401115 <main+15>
+
+ Approved-by: Eli Zaretskii <eliz@gnu.org>
+ Reviewed-by: Alexandra Hajkova <ahajkova@redhat.com>
+ Reviewed-by: Lancelot Six <lsix@lancelotsix.com>
+ Approved-by: Tom Tromey <tom@tromey.com>
+
+2023-01-04 Andreas K. Huettel <dilfridge@gentoo.org>
+
+ Fix AArch64 linker testsuite failures trigeered by differences in build environments.
+ PR 29843
+ * testsuite/ld-aarch64/bti-plt-5.d: Relax regxps slightly to allow
+ for differences in build environments.
+ * testsuite/ld-aarch64/tls-relax-gdesc-le-now.d: Likewise.
+
+2023-01-04 Mark Harmstone <mark@harmstone.com>
+
+ Avoid unaligned pointer reads in PEP .idata section
+ This is something I discovered when working on aarch64, though it's
+ relevant to x86_64 too.
+
+ The PE32+ imports are located in the .idata section, which starts off
+ with a 20-byte structure for each DLL, containing offsets into the rest
+ of the section. This is the Import Directory Table in
+ https://learn.microsoft.com/en-us/windows/win32/debug/pe-format, which
+ is a concatenation of the .idata$2 sections. This is then followed by an
+ 20 zero bytes generated by the linker script, which calls this .idata$3.
+
+ After this comes the .idata$4 entries for each function, which the
+ loader overwrites with the function pointers. Because there's no padding
+ between .idata$3 and .idata$4, this means that if there's an even number
+ of DLLs, the function pointers won't be aligned on an 8-byte boundary.
+
+ Misaligned reads are slower on x86_64, but this is more important on
+ aarch64, as the e.g. `ldr x0, [x0, :lo12:__imp__func]` the compiler
+ might generate requires __imp__func (the .idata$4 entry) to be aligned
+ to 8 bytes. Without this you get IMAGE_REL_ARM64_PAGEOFFSET_12L overflow
+ errors.
+
+2023-01-04 Alan Modra <amodra@gmail.com>
+
+ Merge config/picflag.m4 from gcc
+ and regen libiberty/configure
+
+2023-01-04 Tsukasa OI <research_trasio@irq.a4lg.com>
+
+ sim: Regenerate using the maintainer mode
+ Those files have changed by regenerating using the maintainer mode.
+ The first line of sim/ppc/pk.h have changed by an effect of the commit
+ 319e41e83a40 ("sim: ppc: inline the sim-packages option").
+
+2023-01-04 GDB Administrator <gdbadmin@sourceware.org>
+
+ Automatic date update in version.in
+
+2023-01-03 Max Filippov <jcmvbkbc@gmail.com>
+
+ opcodes: xtensa: fix jump visualization for FLIX
+ opcodes/
+ * xtensa-dis.c (print_insn_xtensa): Add local variables
+ insn_type, target and imm_pcrel to track control flow across
+ multiple slots.
+
+ opcodes: xtensa: implement styled disassembly
+ opcodes/
+ * xtensa-dis.c (print_xtensa_operand)
+ (print_insn_xtensa): Replace fprintf_func with
+ fprintf_styled_func.
+
+2023-01-03 Tom Tromey <tromey@adacore.com>
+
+ Add test case for "finish" with variably-sized types
+ This adds a test case for "finish" with variably-sized types, and for
+ inferior calls as well. This also extends the "runto" proc to handle
+ temporary breakpoints.
+
+ Use value_at_non_lval in get_call_return_value
+ get_call_return_value can handle RETURN_VALUE_STRUCT_CONVENTION,
+ because the call is completely managed by gdb. However, it does not
+ handle variably-sized types correctly. The simplest way to fix this
+ is to use value_at_non_lval, which does type resolution.
+
+ Fix inferior calls with variably-sized return type
+ This patch updates the gdbarch_return_value_as_value implementations
+ to work correctly with variably-sized return types.
+
+ Convert selected architectures to gdbarch_return_value_as_value
+ This converts a few selected architectures to use
+ gdbarch_return_value_as_value rather than gdbarch_return_value. The
+ architectures are just the ones that I am able to test. This patch
+ should not introduce any behavior changes.
+
+2023-01-03 Tom Tromey <tromey@adacore.com>
+
+ Don't let property evaluation affect the current language
+ On PPC, we saw that calling an inferior function could sometimes
+ change the current language, because gdb would select the call dummy
+ frame -- associated with _start.
+
+ This patch changes gdb so that the current language is never affected
+ by DWARF property evaluation.
+
+2023-01-03 Tom Tromey <tromey@adacore.com>
+
+ Introduce value_at_non_lval
+ In some cases, while a value might be read from memory, gdb should not
+ record the value as being equivalent to that memory.
+
+ In Ada, the inferior call code will call ada_convert_actual -- and
+ here, if the argument is already in memory, that address will simply
+ be reused. However, for a call like "f(g())", the result of "g" might
+ be on the stack and thus overwritten by the call to "f".
+
+ This patch introduces a new function that is like value_at but that
+ ensures that the result is non-lvalue.
+
+2023-01-03 Tom Tromey <tromey@adacore.com>
+
+ Don't emit gdbarch_return_value
+ The previous patch introduced a new overload of gdbarch_return_value.
+ The intent here is that this new overload always be called by the core
+ of gdb -- the previous implementation is effectively deprecated,
+ because a call to the old-style method will not work with any
+ converted architectures (whereas calling the new-style method is will
+ delegate when needed).
+
+ This patch changes gdbarch.py so that the old gdbarch_return_value
+ wrapper function can be omitted. This will prevent any errors from
+ creeping in.
+
+2023-01-03 Tom Tromey <tromey@adacore.com>
+
+ Add new overload of gdbarch_return_value
+ The gdbarch "return_value" can't correctly handle variably-sized
+ types. The problem here is that the TYPE_LENGTH of such a type is 0,
+ until the type is resolved, which requires reading memory. However,
+ gdbarch_return_value only accepts a buffer as an out parameter.
+
+ Fixing this requires letting the implementation of the gdbarch method
+ resolve the type and return a value -- that is, both the contents and
+ the new type.
+
+ After an attempt at this, I realized I wouldn't be able to correctly
+ update all implementations (there are ~80) of this method. So,
+ instead, this patch adds a new method that falls back to the current
+ method, and it updates gdb to only call the new method. This way it's
+ possible to incrementally convert the architectures that I am able to
+ test.
+
+2023-01-03 Tom Tromey <tromey@adacore.com>
+
+ Fix crash in amd64-tdep.c
+ amd64-tdep.c could crash when 'finish'ing from a function whose return
+ type had variable length. In this situation, the value will be passed
+ by reference, and this patch avoids the crash.
+
+ (Note that this does not fully fix the bug reported, but it does fix
+ the crash, so it seems worthwhile to land independently.)
+
+2023-01-03 Tom de Vries <tdevries@suse.de>
+
+ [gdb/testsuite] Add xfail in gdb.arch/i386-pkru.exp
+ On a x86_64-linux machine with pkru register, I run into:
+ ...
+ (gdb) PASS: gdb.arch/i386-pkru.exp: set pkru value
+ info register pkru^M
+ pkru 0x12345678 305419896^M
+ (gdb) FAIL: gdb.arch/i386-pkru.exp: read value after setting value
+ ...
+
+ This is a regression due to kernel commit e84ba47e313d ("x86/fpu: Hook up PKRU
+ onto ptrace()"). This is fixed by recent kernel commit 4a804c4f8356
+ ("x86/fpu: Allow PKRU to be (once again) written by ptrace.").
+
+ The regression occurs for kernel versions v5.14-rc1 (the first tag containing
+ the regression) up to but excluding v6.2-rc1 (the first tag containing the fix).
+
+ Fix this by adding an xfail for the appropriate kernel versions.
+
+ Tested on x86_64-linux.
+
+ PR testsuite/29790
+ Bug: https://sourceware.org/bugzilla/show_bug.cgi?id=29790
+
+2023-01-03 Tom Tromey <tromey@adacore.com>
+
+ Do not use PyObject_CallNoArgs
+ PyObject_CallNoArgs was introduced in Python 3.9, so avoid it in favor
+ of PyObject_CallObject.
+
+2023-01-03 Himal <himalr@proton.me>
+
+ Fix a potential problem in the BFD library when accessing the Windows' nul device driver.
+ PR 29947
+ * bfdio.c (_bfd_real_fopen): Do not add a prefix to the Windows'
+ nul device filename.
+
+2023-01-03 Nick Clifton <nickc@redhat.com>
+
+ Fix a translation problem in the x86 assembler.
+ PR 29952
+ * config/tc-i386.c (md_assemble): Avoid constructing translatable
+ strings.
+
+ Updated translations for various languages and sub-directories
+
+2023-01-03 Luis Machado <luis.machado@arm.com>
+
+ Add new NT_ARM_ZA and NT_ARM_SSVE register set constants.
+
+2023-01-03 Andrew Burgess <aburgess@redhat.com>
+
+ [gdb] Fix segfault during inferior call to ifunc
+ With a simple test-case:
+ ...
+ $ cat test.c
+ char *p = "a";
+ int main (void) {
+ return strlen (p);
+ }
+ $ gcc -g test.c
+ ...
+ we run into this segfault:
+ ...
+ $ gdb -q -batch a.out -ex start -ex "p strlen (p)"
+ Temporary breakpoint 1 at 0x1151: file test.c, line 4.
+ [Thread debugging using libthread_db enabled]
+ Using host libthread_db library "/lib/x86_64-linux-gnu/libthread_db.so.1".
+
+ Temporary breakpoint 1, main () at test.c:4
+ 4 return strlen (p);
+
+ Fatal signal: Segmentation fault
+ ...
+
+ The strlen is an ifunc, and consequently during the call to
+ call_function_by_hand_dummy for "p strlen (p)" another call
+ to call_function_by_hand_dummy is used to resolve the ifunc.
+
+ This invalidates the get_current_frame () result in the outer call.
+
+ Fix this by using prepare_reinflate and reinflate.
+
+ Note that this series (
+ https://inbox.sourceware.org/gdb-patches/20221214033441.499512-1-simon.marchi@polymtl.ca/ )
+ should address this problem, but this patch is a simpler fix which is easy to
+ backport.
+
+ Tested on x86_64-linux.
+
+ Co-Authored-By: Tom de Vries <tdevries@suse.de>
+ PR gdb/29941
+ Bug: https://sourceware.org/bugzilla/show_bug.cgi?id=29941
+
+2023-01-03 Mike Frysinger <vapier@gentoo.org>
+
+ sim: sh: move some generated source files to built sources
+ This should have been part of the previous commit 80636a54bcfa2bca3dc8f
+ ("sim: build: move generated headers to built sources"), but they were
+ missed because they're .c files effectively treated as .h files.
+
+ sim: build: add var for tracking sim enable directly
+ Rather than rely on SIM_SUBDIRS being set, add a dedicated variable
+ to track whether to enable the sim. While the current code works
+ fine, it won't work as we remove the recursive make logic (i.e. the
+ SIM_SUBDIRS variable).
+
+ sim: common: drop libcommon.a linkage
+ All of these objects should be in libsim.a already, so don't link to
+ it too. In practice it never gets used, but no point in listing it.
+
+2023-01-03 Mike Frysinger <vapier@gentoo.org>
+
+ sim: build: move generated headers to built sources
+ Automake's automatic header deptracking has a bootstrap problem where
+ it can't detect generated headers when compiling. We've been handling
+ that by adding a custom SIM_ALL_RECURSIVE_DEPS variable, but that only
+ works when building objects recursively in subdirs. As we move those
+ out to the top-level, we don't have any recursive steps anymore. The
+ Automake approach is to declare those headers in BUILT_SOURCES.
+
+ This isn't completely foolproof as the Automake manual documents: it
+ only activates for `make all`, not `make foo.o`, but that shouldn't be
+ a huge limitation as it only affects the initial compile. After that,
+ rebuilds should work fine.
+
+2023-01-03 Mike Frysinger <vapier@gentoo.org>
+
+ sim: cgen: drop common subdir build rules
+ Now that everything has been hoisted to the top-level, we can delete
+ this unused logic.
+
+ sim: or1k: hoist cgen rules to top-level
+
+ sim: m32r: hoist cgen rules to top-level
+
+ sim: lm32: hoist cgen rules to top-level
+
+ sim: iq2000: hoist cgen rules to top-level
+
+ sim: frv: hoist cgen rules to top-level
+
+ sim: cris: hoist cgen rules to top-level
+
+ sim: bpf: hoist cgen rules to top-level
+
+ sim: cgen: hoist rules to the top-level build
+ The rules seem to generate the same output as existing subdir cgen
+ rules with cgen ports, so hopefully this should be correct. These
+ are the last set of codegen rules that we run in subdirs, so this
+ will help unblock killing off subdir builds entirely.
+
+ sim: build: use Automake include vars
+ Rather than define our own hack for emitting an include statement,
+ use the existing Automake include variables. These have the nice
+ side-effect of being more portable.
+
+2023-01-03 GDB Administrator <gdbadmin@sourceware.org>
+
+ Automatic date update in version.in
+
+2023-01-02 Tom Tromey <tromey@adacore.com>
+
+ Simplify debug_exp
+ debug_exp should call expression::dump rather than using the 'op'
+ member.
+
+2023-01-02 Tom Tromey <tromey@adacore.com>
+
+ Initial implementation of Debugger Adapter Protocol
+ The Debugger Adapter Protocol is a JSON-RPC protocol that IDEs can use
+ to communicate with debuggers. You can find more information here:
+
+ https://microsoft.github.io/debug-adapter-protocol/
+
+ Frequently this is implemented as a shim, but it seemed to me that GDB
+ could implement it directly, via the Python API. This patch is the
+ initial implementation.
+
+ DAP is implemented as a new "interp". This is slightly weird, because
+ it doesn't act like an ordinary interpreter -- for example it doesn't
+ implement a command syntax, and doesn't use GDB's ordinary event loop.
+ However, this seemed like the best approach overall.
+
+ To run GDB in this mode, use:
+
+ gdb -i=dap
+
+ The DAP code will accept JSON-RPC messages on stdin and print
+ responses to stdout. GDB redirects the inferior's stdout to a new
+ pipe so that output can be encapsulated by the protocol.
+
+ The Python code uses multiple threads to do its work. Separate
+ threads are used for reading JSON from the client and for writing JSON
+ to the client. All GDB work is done in the main thread. (The first
+ implementation used asyncio, but this had some limitations, and so I
+ rewrote it to use threads instead.)
+
+ This is not a complete implementation of the protocol, but it does
+ implement enough to demonstrate that the overall approach works.
+
+ There is a rudimentary test suite. It uses a JSON parser written in
+ pure Tcl. This parser is under the same license as Tcl itself, so I
+ felt it was acceptable to simply import it into the tree.
+
+ There is also a bit of documentation -- just documenting the new
+ interpreter name.
+
+2023-01-02 Jonas Hoerberg <JHorberg@danfoss.com>
+
+ Fix target remote pipe command for MinGW
+ The cced7cacecad104fff0 ("gdb: preserve `|` in connection details string")
+ commit added '|' detection and removal to ser-pipe.c, but missed to add it
+ to ser-mingw.c.
+
+ This results in the error message below for MinGW hosts:
+ error starting child process '| <executable> <args>': CreateProcess: No such file or directory
+
+ This commit add the missing '|' detection and removal to ser-mingw.c.
+
+2023-01-02 Tom Tromey <tromey@adacore.com>
+
+ Remove target: prefix from gdb_sysroot in find_separate_debug_file
+ I noticed that, when using gdbserver, gdb might print:
+
+ Reading /usr/lib/debug/lib64//libcap.so.2.48-2.48-4.fc36.x86_64.debug from remote target...
+ Reading target:/usr/lib/debug/lib64//libcap.so.2.48-2.48-4.fc36.x86_64.debug from remote target...
+
+ The second line has the "target:" prefix, but from the code it's clear
+ that this string is being passed verbatim to gdbserver -- which seems
+ wrong.
+
+ I filed PR remote/29929 for this.
+
+ The problem here is that find_separate_debug_file uses gdb_sysroot
+ without checking to see if it starts with the "target:" prefix. This
+ patch changes this code to be a little more careful.
+
+ Bug: https://sourceware.org/bugzilla/show_bug.cgi?id=29929
+
+2023-01-02 Tom de Vries <tdevries@suse.de>
+
+ [gdb/testsuite] Fix gdb.python/py-breakpoint.exp with libstdc++ debug info
+ On x86_64-linux, I run into:
+ ...
+ (gdb) python hbp1 = gdb.Breakpoint("add", type=gdb.BP_HARDWARE_BREAKPOINT)^M
+ Hardware assisted breakpoint 2 at 0x40072e: add. (7 locations)^M
+ (gdb) FAIL: gdb.python/py-breakpoint.exp: test_hardware_breakpoints: \
+ Set hardware breakpoint
+ ...
+ due to libstdc++ debug info:
+ ...
+ $ gdb -q -batch outputs/gdb.python/py-breakpoint/py-breakpoint \
+ -ex start \
+ -ex "b add" \
+ -ex "info break"
+ Temporary breakpoint 1 at 0x40076a: file py-breakpoint.c, line 50.
+
+ Temporary breakpoint 1, main (argc=1, argv=$hex) at py-breakpoint.c:50
+ 50 int foo = 5;
+ Breakpoint 2 at 0x40072e: add. (7 locations)
+ Num Type Disp Enb Address What
+ 2 breakpoint keep y <MULTIPLE>
+ 2.1 y 0x000000000040072e in add(int) at \
+ py-breakpoint.c:39
+ 2.2 y 0x00007ffff7b131de in \
+ (anonymous namespace)::fast_float::bigint::add at \
+ ../../../../../libstdc++-v3/src/c++17/fast_float/fast_float.h:1815
+ ...
+ 2.7 y 0x00007ffff7b137e4 in \
+ (anonymous namespace)::fast_float::bigint::add at \
+ ../../../../../libstdc++-v3/src/c++17/fast_float/fast_float.h:1815
+ ...
+
+ Fix this by using qualified=True.
+
+ Tested on x86_64-linux.
+ PR testsuite/29910
+ Bug: https://sourceware.org/bugzilla/show_bug.cgi?id=29910
+
+2023-01-02 Mike Frysinger <vapier@gentoo.org>
+
+ sim: replace -I$srcroot/bfd include with -I$srcroot
+ Clean up includes a bit by making ports include bfd/ headers
+ explicitly. This matches other projects, and makes it more clear
+ where these headers are coming from.
+
+ sim: replace -I$srcroot/opcodes include with -I$srcroot
+ Clean up includes a bit by making ports include opcodes/ headers
+ explicitly. This matches other projects, and makes it more clear
+ where these headers are coming from.
+
+2023-01-02 Alan Modra <amodra@gmail.com>
+
+ obsolete target tidy
+ Delete a few files only used for obsolete targets, and tidy config,
+ xfails and other pieces of support specific to those targets. And
+ since I was editing target triplets in test files, fix the nm
+ alpha-linuxecoff fails.
+
+2023-01-02 GDB Administrator <gdbadmin@sourceware.org>
+
+ Automatic date update in version.in
+
+2023-01-01 Mike Frysinger <vapier@gentoo.org>
+
+ sim: build: drop unused SIM_EXTRA_LIBS
+ Now that all run binaries are linked in the topdir, this subdir libs
+ variable isn't used anywhere, so punt it.
+
+ sim: erc32: drop -I$(srcroot)
+ Since the port doesn't actually use this include, drop it.
+ No other port is doing this either.
+
+ sim: drop mention of & support for subdir configure
+ Now that no ports use these common configure APIs, delete the logic
+ and remove it from the documentation.
+
+ sim: refresh copyright dates a bit
+ Update a few files that were missed, and revert the generated Automake
+ output that uses dates from Automake itself.
+
+ sim: or1k: drop unused rules
+ These rules are the same as the common ones, so drop them to simplify.
+
+ sim: iq2000: drop unused cpu define logic
+ These defines seem to have been added in anticipation of adding another
+ cpu port (IQ10BF?), but that was over 20 years ago, and that port has
+ yet to materialize. So drop these compile flags since they don't do
+ anything to the generated code. If another port ever shows up, it's
+ easy enough to readd things as needed.
+
+2023-01-01 Joel Brobecker <brobecker@adacore.com>
+
+ manual copyright year range of various GDB files to add 2023
+ This commit updates the following file...
+
+ gdb/doc/gdb.texinfo
+ gdb/doc/refcard.tex
+ gdb/syscalls/update-netbsd.sh
+
+ ... by hand as instructed by the gdb/copyright.py script.
+ The update by hand is needed because the copyright headers
+ to update are actually nested inside those files, rather
+ than located at the start of the file.
+
+2023-01-01 Joel Brobecker <brobecker@adacore.com>
+
+ Update copyright year range in header of all files managed by GDB
+ This commit is the result of running the gdb/copyright.py script,
+ which automated the update of the copyright year range for all
+ source files managed by the GDB project to be updated to include
+ year 2023.
+
+2023-01-01 Joel Brobecker <brobecker@adacore.com>
+
+ gdb/copyright.py: Adjust following rename of sim/ppc/ppc-instructions...
+ ... to sim/ppc/powerpc.igen
+
+ This file is in the NOT_FSF_LIST because this file has a copyright
+ which is not assigned to the FSF. Since the file got renamed,
+ the corresponding entry in NOT_FSF_LIST needs to be renamed as well.
+
+2023-01-01 Joel Brobecker <brobecker@adacore.com>
+
+ Update copyright year in help message of gdb, gdbserver, gdbreplay
+ This commit updates the copyright year displayed by gdb, gdbserver
+ and gdbreplay's help message from 2022 to 2023, as per our Start
+ of New Year procedure. The corresponding source files' copyright
+ header are also updated accordingly.
+
+2023-01-01 Alan Modra <amodra@gmail.com>
+
+ Update year range in gprofng copyright notices
+ This adds 'Innovative Computing Labs' as an external author to
+ update-copyright.py, to cover the copyright notice in
+ gprofng/common/opteron_pcbe.c, and uses that plus another external
+ author 'Oracle and' to update gprofng copyright dates. I'm not going
+ to commit 'Oracle and' as an accepted author, but that covers the
+ string "Copyright (c) 2006, 2012, Oracle and/or its affiliates. All
+ rights reserved." found in gprofng/testsuite/gprofng.display/jsynprog
+ files.
+
+ Update year range in copyright notice of binutils files
+ The newer update-copyright.py fixes file encoding too, removing cr/lf
+ on binutils/bfdtest2.c and ld/testsuite/ld-cygwin/exe-export.exp, and
+ embedded cr in binutils/testsuite/binutils-all/ar.exp string match.
+
+2023-01-01 Alan Modra <amodra@gmail.com>
+
+ Update etc/update-copyright.py
+ This picks up some improvements from gcc/contrib. exceptions must
+ derive from BaseException, port to python3, retain original file mode,
+ fix name of script in examples.
+
+ Adds libsframe to list of default dirs. I would have added gprofng
+ too but there are some files claiming copyright by authors other than
+ the Free Software Foundation.
+
+2023-01-01 GDB Administrator <gdbadmin@sourceware.org>
+
+ Automatic date update in version.in
+
+2022-12-31 Nick Clifton <nickc@redhat.com>
+
+ Update version numbers in howto-make-a-release document
+
+ Update version number and regenerate files
+
+ Add markers for 2.40 branch
+
+ sync libiberty sources with gcc mainline
+
+2022-12-31 Tom de Vries <tdevries@suse.de>
+
+ [gdb/cli] Add maintenance ignore-probes
+ There's a command "disable probes", but SystemTap probes, for instance
+ libc:longjmp cannot be disabled:
+ ...
+ $ gdb -q -batch a.out -ex start -ex "disable probes libc ^longjmp$"
+ ...
+ Probe libc:longjmp cannot be disabled.
+ Probe libc:longjmp cannot be disabled.
+ Probe libc:longjmp cannot be disabled.
+ ...
+
+ Add a command "maintenance ignore-probes" that ignores probes during
+ get_probes, such that we can easily pretend to use a libc without the
+ libc:longjmp probe:
+ ...
+ (gdb) maint ignore-probes -verbose libc ^longjmp$
+ ignore-probes filter has been set to:
+ PROVIDER: 'libc'
+ PROBE_NAME: '^longjmp$'
+ OBJNAME: ''
+ (gdb) start ^M
+ ...
+ Ignoring SystemTap probe libc longjmp in /lib64/libc.so.6.^M
+ Ignoring SystemTap probe libc longjmp in /lib64/libc.so.6.^M
+ Ignoring SystemTap probe libc longjmp in /lib64/libc.so.6.^M
+ ...
+
+ The "Ignoring ..." messages can be suppressed by not using -verbose.
+
+ Note that as with "disable probes", running simply "maint ignore-probes"
+ ignores all probes.
+
+ The ignore-probes filter can be reset by using:
+ ...
+ (gdb) maint ignore-probes -reset
+ ignore-probes filter has been reset
+ ...
+
+ For now, the command is only supported for SystemTap probes.
+
+ PR cli/27159
+ Bug: https://sourceware.org/bugzilla/show_bug.cgi?id=27159
+
+2022-12-31 Mark Harmstone <mark@harmstone.com>
+
+ ld/testsuite: Don't add index to sizes in pdb.exp
+
+ ld: Handle LF_VFTABLE types in PDBs
+
+2022-12-31 Mark Harmstone <mark@harmstone.com>
+
+ ld: Handle extended-length data structures in PDB types
+ A few fixes to minor issues I've discovered in my PDB patches.
+
+ * If sizes or offsets are greater than 0x8000, they get encoded as
+ extended values in the same way as for enum values - e.g. a LF_ULONG
+ .short followed by a .long.
+
+ * I've managed to coax MSVC to produce another type, LF_VFTABLE, which
+ is seen when dealing with COM. I don't think LLVM emits this. Note that
+ we can't just implement everything in Microsoft's header files, as most
+ of it is obsolete.
+
+ * Fixes a stupid bug in the test program, where I was adding an index to
+ a size. The index was hard-coded to 0, so this didn't cause any actual
+ issues.
+
+2022-12-31 Nick Clifton <nickc@redhat.com>
+
+ Updated Romanian translation for the binutils sub-directory
+
+2022-12-31 Tom de Vries <tdevries@suse.de>
+
+ [gdb/python] Fix gdb.python/py-finish-breakpoint2.exp for -m32
+ [ Partial resubmission of an earlier submission by Andrew (
+ https://sourceware.org/pipermail/gdb-patches/2012-September/096347.html ), so
+ listing him as co-author. ]
+
+ With x86_64-linux and target board unix/-m32, we have:
+ ...
+ (gdb) continue^M
+ Continuing.^M
+ Exception #10^M
+ ^M
+ Breakpoint 3, throw_exception_1 (e=10) at py-finish-breakpoint2.cc:23^M
+ 23 throw new int (e);^M
+ (gdb) FAIL: gdb.python/py-finish-breakpoint2.exp: \
+ check FinishBreakpoint in catch()
+ ...
+
+ The following scenario happens:
+ - set breakpoint in throw_exception_1, a function that throws an exception
+ - continue
+ - hit breakpoint, with call stack main.c:38 -> throw_exception_1
+ - set a finish breakpoint
+ - continue
+ - hit the breakpoint again, with call stack main.c:48 -> throw_exception
+ -> throw_exception_1
+
+ Due to the exception, the function call did not properly terminate, and the
+ finish breakpoint didn't trigger. This is expected behaviour.
+
+ However, the intention is that gdb detects this situation at the next stop
+ and calls the out_of_scope callback, which would result here in this test-case
+ in a rather confusing "exception did not finish" message. So the problem is
+ that this message doesn't show up, in other words, the out_of_scope callback
+ is not called.
+
+ [ Note that the fact that the situation is detected only at the next stop
+ (wherever that happens to be) could be improved upon, and the earlier
+ submission did that by setting a longjmp breakpoint. But I'm considering this
+ problem out-of-scope for this patch. ]
+
+ Note that the message does show up later, at thread exit:
+ ...
+ [Inferior 1 (process 20046) exited with code 0236]^M
+ exception did not finish ...^M
+ ...
+
+ The decision on whether to call the out_of_scope call back is taken in
+ bpfinishpy_detect_out_scope_cb, and the interesting bit is here:
+ ...
+ if (b->pspace == current_inferior ()->pspace
+ && (!target_has_registers ()
+ || frame_find_by_id (b->frame_id) == NULL))
+ bpfinishpy_out_of_scope (finish_bp);
+ ...
+
+ In the case of the thread exit, the callback triggers because
+ target_has_registers () == 0.
+
+ So why doesn't the callback trigger in the case of the breakpoint?
+
+ Well, the b->frame_id is the frame_id of the frame of main (the frame
+ in which the finish breakpoint is supposed to trigger), so AFAIU
+ frame_find_by_id (b->frame_id) == NULL will only be true once we've
+ left main, at which point I guess we don't stop till thread exit.
+
+ Fix this by saving the frame in which the finish breakpoint was created, and
+ using frame_find_by_id () == NULL on that frame instead, such that we have:
+ ...
+ (gdb) continue^M
+ Continuing.^M
+ Exception #10^M
+ ^M
+ Breakpoint 3, throw_exception_1 (e=10) at py-finish-breakpoint2.cc:23^M
+ 23 throw new int (e);^M
+ exception did not finish ...^M
+ (gdb) FAIL: gdb.python/py-finish-breakpoint2.exp: \
+ check FinishBreakpoint in catch()
+ ...
+
+ Still, the test-case is failing because it's setup to match the behaviour that
+ we get on x86_64-linux with target board unix/-m64:
+ ...
+ (gdb) continue^M
+ Continuing.^M
+ Exception #10^M
+ stopped at ExceptionFinishBreakpoint^M
+ (gdb) PASS: gdb.python/py-finish-breakpoint2.exp: \
+ check FinishBreakpoint in catch()
+ ...
+
+ So what happens here? Again, due to the exception, the function call did not
+ properly terminate, but the finish breakpoint still triggers. This is somewhat
+ unexpected. This happens because it just so happens to be that the frame
+ return address at which the breakpoint is set, is also the first instruction
+ after the exception has been handled. This is a know problem, filed as
+ PR29909, so KFAIL it, and modify the test-case to expect the out_of_scope
+ callback.
+
+ Also add a breakpoint after setting the finish breakpoint but before throwing
+ the exception, to check that we don't call the out_of_scope callback too early.
+
+ Tested on x86_64-linux, with target boards unix/-m32.
+
+ Co-Authored-By: Andrew Burgess <aburgess@redhat.com>
+ PR python/27247
+ Bug: https://sourceware.org/bugzilla/show_bug.cgi?id=27247
+
+2022-12-31 Tom de Vries <tdevries@suse.de>
+
+ [gdb/testsuite] Fix gdb.base/print-symbol-loading.exp on ubuntu 22.04.1
+ On ubuntu 22.04.1 x86_64, I run into:
+ ...
+ (gdb) PASS: gdb.base/print-symbol-loading.exp: shlib off: \
+ set print symbol-loading off
+ sharedlibrary .*^M
+ Symbols already loaded for /lib/x86_64-linux-gnu/libc.so.6^M
+ Symbols already loaded for /lib/x86_64-linux-gnu/libpthread.so.0^M
+ (gdb) FAIL: gdb.base/print-symbol-loading.exp: shlib off: load shared-lib
+ ...
+
+ The test-case expects the libc.so line, but not the libpthread.so line.
+
+ However, we have:
+ ...
+ $ ldd /lib/x86_64-linux-gnu/libc.so.6
+ linux-vdso.so.1 (0x00007ffd7f7e7000)
+ libgtk3-nocsd.so.0 => /lib/x86_64-linux-gnu/libgtk3-nocsd.so.0 (0x00007f4468c00000)
+ /lib64/ld-linux-x86-64.so.2 (0x00007f4469193000)
+ libdl.so.2 => /lib/x86_64-linux-gnu/libdl.so.2 (0x00007f4468f3e000)
+ libpthread.so.0 => /lib/x86_64-linux-gnu/libpthread.so.0 (0x00007f4468f39000)
+ ...
+ so it's not unexpected that libpthread.so is loaded if libc.so is loaded.
+
+ Fix this by accepting the libpthread.so line.
+
+ Tested on x86_64-linux.
+
+ PR testsuite/29919
+ Bug: https://sourceware.org/bugzilla/show_bug.cgi?id=29919
+
+2022-12-31 Tom de Vries <tdevries@suse.de>
+
+ [gdb/testsuite] Replace deprecated pthread_yield in gdb.threads/watchpoint-fork.exp
+ On Ubuntu 22.04.1 x86_64, with glibc 2.35 I run into:
+ ...
+ watchpoint-fork-mt.c: In function 'start':^M
+ watchpoint-fork-mt.c:67:7: warning: 'pthread_yield' is deprecated: \
+ pthread_yield is deprecated, use sched_yield instead \
+ [-Wdeprecated-declarations]^M
+ 67 | i = pthread_yield ();^M
+ | ^^M
+ ...
+
+ Fix this as suggested, by using sched_yield instead.
+
+ Tested on x86_64-linux.
+
+2022-12-31 Tom de Vries <tdevries@suse.de>
+
+ [gdb/testsuite] Fix gdb.base/corefile.exp with glibc 2.35
+ On Ubuntu 22.04.1 x86_64 (with glibc 2.35), I run into:
+ ...
+ (gdb) PASS: gdb.base/corefile.exp: $_exitcode is void
+ bt^M
+ #0 __pthread_kill_implementation (...) at ./nptl/pthread_kill.c:44^M
+ #1 __pthread_kill_internal (...) at ./nptl/pthread_kill.c:78^M
+ #2 __GI___pthread_kill (...) at ./nptl/pthread_kill.c:89^M
+ #3 0x00007f4985e1a476 in __GI_raise (...) at ../sysdeps/posix/raise.c:26^M
+ #4 0x00007f4985e007f3 in __GI_abort () at ./stdlib/abort.c:79^M
+ #5 0x0000556b4ea4b504 in func2 () at gdb.base/coremaker.c:153^M
+ #6 0x0000556b4ea4b516 in func1 () at gdb.base/coremaker.c:159^M
+ #7 0x0000556b4ea4b578 in main (...) at gdb.base/coremaker.c:171^M
+ (gdb) PASS: gdb.base/corefile.exp: backtrace
+ up^M
+ #1 __pthread_kill_internal (...) at ./nptl/pthread_kill.c:78^M
+ 78 in ./nptl/pthread_kill.c^M
+ (gdb) FAIL: gdb.base/corefile.exp: up
+ ...
+
+ The problem is that the regexp used here:
+ ...
+ gdb_test "up" "#\[0-9\]* *\[0-9xa-fH'\]* in .* \\(.*\\).*" "up"
+ ...
+ does not fit the __pthread_kill_internal line which lacks the instruction
+ address due to inlining.
+
+ Fix this by making the regexp less strict.
+
+ Tested on x86_64-linux.
+
+2022-12-31 GDB Administrator <gdbadmin@sourceware.org>
+
+ Automatic date update in version.in
+
+2022-12-30 Tom de Vries <tdevries@suse.de>
+
+ [gdb/testsuite] Fix gdb.threads/dlopen-libpthread.exp for upstream glibc
+ On ubuntu 22.04.1 x86_64, I run into:
+ ...
+ (gdb) info probes all rtld rtld_map_complete^M
+ No probes matched.^M
+ (gdb) XFAIL: gdb.threads/dlopen-libpthread.exp: info probes all rtld rtld_map_complete
+ UNTESTED: gdb.threads/dlopen-libpthread.exp: no matching probes
+ ...
+ This has been filed as PR testsuite/17016.
+
+ The problem is that the name rtld_map_complete is used, which was only
+ available in Fedora 17, and upstream the name map_complete was used.
+
+ In the email thread discussing a proposed patch (
+ https://sourceware.org/legacy-ml/gdb-patches/2014-09/msg00712.html ) it was
+ suggested to make the test-case handle both names.
+
+ So, handle both names: map_complete and rtld_map_complete.
+
+ This exposes the following FAIL:
+ ...
+ (gdb) info sharedlibrary^M
+ From To Syms Read Shared Object Library^M
+ $hex $hex Yes /lib64/ld-linux-x86-64.so.2^M
+ $hex $hex Yes (*) /lib/x86_64-linux-gnu/libgtk3-nocsd.so.0^M
+ $hex $hex Yes /lib/x86_64-linux-gnu/libc.so.6^M
+ $hex $hex Yes /lib/x86_64-linux-gnu/libdl.so.2^M
+ $hex $hex Yes /lib/x86_64-linux-gnu/libpthread.so.0^M
+ (*): Shared library is missing debugging information.^M
+ (gdb) FAIL: gdb.threads/dlopen-libpthread.exp: libpthread.so not found
+ ...
+ due to using a glibc (v2.35) that has libpthread integrated into libc.
+
+ Fix this by changing the FAIL into UNSUPPORTED.
+
+ Tested on x86_64-linux.
+
+ Bug: https://sourceware.org/bugzilla/show_bug.cgi?id=17016
+
+2022-12-30 Tom de Vries <tdevries@suse.de>
+
+ [gdb/testsuite] Fix gdb.reverse/step-indirect-call-thunk.exp with -fcf-protection
+ On Ubuntu 22.04.1 x86_64, I run into:
+ ...
+ gdb.reverse/step-indirect-call-thunk.c: In function 'inc':^M
+ gdb.reverse/step-indirect-call-thunk.c:22:1: error: '-mindirect-branch' and \
+ '-fcf-protection' are not compatible^M
+ 22 | { /* inc.1 */^M
+ | ^^M
+ ...
+
+ Fix this by forcing -fcf-protection=none, if supported.
+
+ Tested on x86_64-linux.
+
+2022-12-30 Tom de Vries <tdevries@suse.de>
+
+ [gdb/testsuite] Fix gdb.cp/step-and-next-inline.exp with -fcf-protection
+ On Ubuntu 22.04.1 x86_64, I run into:
+ ...
+ (gdb) PASS: gdb.cp/step-and-next-inline.exp: no_header: not in inline 1
+ next^M
+ 51 if (t != NULL^M
+ (gdb) FAIL: gdb.cp/step-and-next-inline.exp: no_header: next step 1
+ ...
+
+ This is due to -fcf-protection, which adds the endbr64 at the start of get_alias_set:
+ ...
+ 0000000000001180 <_Z13get_alias_setP4tree>:
+ 1180: f3 0f 1e fa endbr64
+ 1184: 48 85 ff test %rdi,%rdi
+ ...
+ so the extra insn gets an is-stmt line number entry:
+ ...
+ INDEX LINE ADDRESS IS-STMT PROLOGUE-END
+ ...
+ 11 50 0x0000000000001180 Y
+ 12 50 0x0000000000001180
+ 13 51 0x0000000000001184 Y
+ 14 54 0x0000000000001184
+ ...
+ and when stepping into get_alias_set we step to line 50:
+ ...
+ (gdb) PASS: gdb.cp/step-and-next-inline.exp: no_header: in main
+ step^M
+ get_alias_set (t=t@entry=0x555555558018 <xx>) at step-and-next-inline.cc:50^M
+ 50 {^M
+ ...
+
+ In contrast, with -fcf-protection=none, we get:
+ ...
+ 0000000000001170 <_Z13get_alias_setP4tree>:
+ 1170: 48 85 ff test %rdi,%rdi
+ ...
+ and:
+ ...
+ INDEX LINE ADDRESS IS-STMT PROLOGUE-END
+ ...
+ 11 50 0x0000000000001170 Y
+ 12 51 0x0000000000001170 Y
+ 13 54 0x0000000000001170
+ ...
+ so when stepping into get_alias_set we step to line 51:
+ ...
+ (gdb) PASS: gdb.cp/step-and-next-inline.exp: no_header: in main
+ step^M
+ get_alias_set (t=t@entry=0x555555558018 <xx>) at step-and-next-inline.cc:51^M
+ 51 if (t != NULL^M
+ ...
+
+ Fix this by rewriting the gdb_test issuing the step command to check which
+ line the step lands on, and issuing an extra next if needed.
+
+ Tested on x86_64-linux, both with and without -fcf-protection=none.
+
+ PR testsuite/29920
+ Bug: https://sourceware.org/bugzilla/show_bug.cgi?id=29920
+
+2022-12-30 Tom de Vries <tdevries@suse.de>
+
+ [gdb/symtab] Make comp_unit_head.length private
+ Make comp_unit_head.length private, to enforce using accessor functions.
+
+ Replace accessor function get_length with get_length_with_initial and
+ get_length_without_initial, to make it explicit which variant we're using.
+
+ Tested on x86_64-linux.
+
+ PR symtab/29343
+ Bug: https://sourceware.org/bugzilla/show_bug.cgi?id=29343
+
+2022-12-30 Alan Modra <amodra@gmail.com>
+
+ PR29948, heap-buffer-overflow in display_debug_lines_decoded
+ This fixes a couple of places in display_debug_lines_decoded that were
+ off by one in checking DWARF5 .debug_line directory indices. It also
+ displays the DWARF5 entry 0 for the program current directory rather
+ than "." as is done for pre-DWARF5. I decided against displaying
+ DW_AT_comp_dir for pre-DWARF5 since I figure it is better for readelf
+ to minimally interpret debug info.
+
+ binutils/
+ PR 29948
+ * dwarf.c (display_debug_lines_decoded): Display the given
+ directory entry 0 for DWARF5. Properly check directory index
+ against number of entries in the table. Revert to using
+ unsigned int for n_directories and associated variables.
+ Correct warning messages.
+ gas/
+ * testsuite/gas/elf/dwarf-5-loc0.d: Update.
+
+2022-12-30 GDB Administrator <gdbadmin@sourceware.org>
+
+ Automatic date update in version.in
+
+2022-12-29 Tsukasa OI <research_trasio@irq.a4lg.com>
+
+ RISC-V: Simplify riscv_csr_address logic on state enable extensions
+ This commit makes CSR class handling for 'Smstateen' and 'Ssstateen'
+ extensions simpler using fall-throughs (as used in CSR_CLASS_I{,_32}).
+
+ gas/ChangeLog:
+
+ * config/tc-riscv.c (riscv_csr_address): Simplify the logic for
+ 'Smstateen' and 'Ssstateen' extensions.
+
+2022-12-29 GDB Administrator <gdbadmin@sourceware.org>
+
+ Automatic date update in version.in
+
+2022-12-28 Tom Tromey <tom@tromey.com>
+
+ Use $decimal in timestamp.exp
+ This patch fixes a review comment by Tom de Vries. He pointed out
+ that the new timestamp.exp should use the $decimal convenience regexp.
+
+2022-12-28 Tom Tromey <tom@tromey.com>
+
+ Fix "set debug timestamp"
+ PR cli/29945 points out that "set debug timestamp 1" stopped working
+ -- this is a regression due to commit b8043d27 ("Remove a ui-related
+ memory leak").
+
+ This patch fixes the bug and adds a regression test.
+
+ I think this should probably be backported to the gdb 13 branch.
+
+ Bug: https://sourceware.org/bugzilla/show_bug.cgi?id=29945
+
+2022-12-28 GDB Administrator <gdbadmin@sourceware.org>
+
+ Automatic date update in version.in
+
+2022-12-27 H.J. Lu <hjl.tools@gmail.com>
+
+ x86-64: Allocate input section memory if needed
+ When --no-keep-memory is used, the input section memory may not be cached.
+ Allocate input section memory for -z pack-relative-relocs if needed.
+
+ bfd/
+
+ PR ld/29939
+ * elfxx-x86.c (elf_x86_size_or_finish_relative_reloc): Allocate
+ input section memory if needed.
+
+ ld/
+
+ PR ld/29939
+ * testsuite/ld-elf/dt-relr-2i.d: New test.
+
+2022-12-27 Christoph Müllner <christoph.muellner@vrull.eu>
+
+ RISC-V: Fix T-Head Fmv vendor extension encoding
+ A recent change in the XTheadFmv spec fixed an encoding bug in the
+ document. This patch changes the code to follow this bugfix.
+
+ Spec patch can be found here:
+ https://github.com/T-head-Semi/thead-extension-spec/pull/11
+
+2022-12-27 Tom Tromey <tromey@adacore.com>
+
+ Handle SIGSEGV in gdb selftests
+ The gdb.gdb self-tests were timing out for me, which turned out to be
+ PR testsuite/29325. Looking into it, the problem is that the version
+ of the Boehm GC that is used by Guile on my machine causes a SEGV
+ during stack probing. This unexpected stop confuses the tests and
+ causes repeated timeouts.
+
+ This patch adapts the two failing tests. This makes them work for me,
+ and reduces the running time of gdb.gdb from 20 minutes to about 11
+ seconds.
+
+ Bug: https://sourceware.org/bugzilla/show_bug.cgi?id=29325
+
+2022-12-27 Mike Frysinger <vapier@gentoo.org>
+
+ sim: build: clean up unused codegen logic
+ Now that all igen ports are in the top-level makefile, we don't need
+ this logic in any subdirs anymore, so clean it up.
+
+ sim: mips: hoist "multi" igen rules up to common builds
+ Since these are the last mips igen rules, we can clean up a number of
+ bits in the local Makefile.in.
+
+ sim: mips: hoist "m16" igen rules up to common builds
+
+ sim: mips: hoist "single" igen rules up to common builds
+
+ sim: mips: rename "igen" generation mode to "single"
+ The naming in here has grown organically and is confusing to follow.
+ Originally there was only one set of rules for generating code from
+ the igen sources, so calling it "tmp-igen" and such made sense. But
+ when other multigen modes were added ("m16" & "multi") which also
+ used igen, it's not clear what's common igen and what's specific to
+ this generation mode. So rename the set of rules from "igen" to
+ "single" so it's easier to follow.
+
+ sim: mips: hoist itable igen rules up to common builds
+ Since this rule is pretty simple, hoist it up to the common build.
+
+2022-12-27 Mike Frysinger <vapier@gentoo.org>
+
+ sim: mips: unify itable generation (a bit)
+ The m16 & multi targets generate itable once even when all the other
+ modules are generated multiple times. The default igen target will
+ generate itable with everything else out of convenience. This means
+ flags are passed which don't affect the generated itable there.
+
+ We can unify the itable generation by making sure the right -F/-M
+ filter variables are passed down. Since there's already a dedicated
+ rule & variable in the multi build mode, generalize that and switch
+ the m16 & igen builds over too.
+
+ I spent a lot of time staring at this code, building for diff mips
+ targets, and exploring all the shell code paths. I think this is
+ safe, but only time (and users) will really tell.
+
+2022-12-27 Mike Frysinger <vapier@gentoo.org>
+
+ sim: mips: rename multi_flags to igen_itable_flags
+ This variable is only used to generate the itable files. In preparation
+ for merging the itable logic among all ports, rename "multi_flags" to a
+ more appropriate "igen_itable_flags" variable. There should be no real
+ chagnes here otherwise.
+
+ sim: mips: drop unused micromips igen logic
+ This code appears to be unused since it was first merged. When
+ micromips was enabled, it was via the "MULTI" config, not the
+ "MICROMIPS" config, and the multi configs have sep vars. Since
+ nothing sets SIM_MIPS_GEN=MICROMIPS in the config, all of this
+ should be unreachable, so punt it to simplify. Further, the
+ SIM_MIPS_MICROMIPS16_FLAGS & SIM_MIPS_MICROMIPS_FLAGS settings
+ rely on sim_mips_micromips{,16}_{filter,machine} variables that
+ are never set in the configure script.
+
+2022-12-27 GDB Administrator <gdbadmin@sourceware.org>
+
+ Automatic date update in version.in
+
+2022-12-26 Tom Tromey <tom@tromey.com>
+
+ Add initializers to comp_unit_head
+ PR symtab/29343 points out that it would be beneficial if
+ comp_unit_head had a constructor and used initializers. This patch
+ implements this. I'm unsure if this is sufficient to close the bug,
+ but at least it's a step.
+
+ Bug: https://sourceware.org/bugzilla/show_bug.cgi?id=29343
+
+2022-12-26 Alan Modra <amodra@gmail.com>
+
+ bfd/dwarf2.c: allow use of DWARF5 directory entry 0
+ I think the test for table->files[file].dir being non-zero is wrong
+ for DWARF5 where index zero is allowed and is the current directory of
+ the compilation. Most times this will be covered by the use of
+ table->comp_dir (from DW_AT_comp_dir) in concat_filename but the point
+ of putting the current dir in .debug_line was so the section could
+ stand alone without .debug_info.
+
+ Also, there is no need to check for table->dirs non-NULL, the
+ table->num_dirs test is sufficient.
+
+ * dwarf2.c (concat_filename): Correct and simplify tests of
+ directory index.
+
+2022-12-26 Flavio Cruz <flaviocruz@gmail.com>
+
+ Add support for x86_64-*-gnu-* targets to build x86_64 gnumach/hurd
+
+2022-12-26 GDB Administrator <gdbadmin@sourceware.org>
+
+ Automatic date update in version.in
+
+2022-12-25 Mike Frysinger <vapier@gentoo.org>
+
+ sim: build: drop support for subdir distclean
+ All ports that need to clean things up at distclean time have moved
+ to the top-level build, so we can drop support for this hook.
+
+ sim: mips: move distclean settings to common build
+ This was missed when mips/configure was merged into the top-level.
+
+2022-12-25 Indu Bhagat <indu.bhagat@oracle.com>
+
+ libsframe: write out SFrame FRE start address correctly
+ The following test was failing on ppc64 and s390x:
+ "FAIL: encode-1: Encode buffer match"
+
+ The offending stub was how we memcpy the FRE start address to the buffer
+ (on-disk format). When the host is big-endian, the address of the
+ source buffer for the memcpy needs to point to the uint8_t/uint16_t sized
+ value of the FRE start addr, not uint32_t sized value; we intend to copy
+ out only the fre_start_addr_sz number of bytes.
+
+ ChangeLog:
+
+ * libsframe/sframe.c (sframe_encoder_write_fre_start_addr): New
+ function.
+ (sframe_encoder_write_fre): Use it instead of memcpy.
+
+2022-12-25 Mike Frysinger <vapier@gentoo.org>
+
+ sim: smp: plumb igen flag down to all users
+ While mips has respected sim_igen_smp at configure time (which was
+ always empty since it defaulted smp to off), no other igen port did.
+ Move this to a makefile variable and plumb it through the common
+ IGEN_RUN variable instead so everyone gets it by default. We also
+ clean up some redundant -N0 setting with multirun mips.
+
+ sim: smp: make option available again
+ At some point we want this to work, but it's not easy to test if
+ the configure option isn't available. Restore it, but keep the
+ default off.
+
+ sim: cpu: change default init to handle all cpus
+ All the runtimes were only initializing a single CPU. When SMP is
+ enabled, things quickly crash as none of the other CPU structs are
+ setup. Change the default from 0 to the compile time value.
+
+ sim: msp430: add basic SMP cpu init
+ There's no need to assert there's only 1 CPU when setting them all
+ up here is trivial.
+
+ sim: m32r: fix iterator typo when setting up cpus
+ This code loops over available cpus with "c", but then looks up the
+ cpu with "i". Fix the typo so the code works correctly with smp.
+
+ sim: v850: fix SMP compile
+ The igen tool sets up the SD & CPU defines for code fragments to use,
+ but v850 was expecting "sd". Change all the igen related code to use
+ SD so it actually compiles, and fix a few places to use "CPU" instead
+ of hardcoding cpu0.
+
+ sim: or1k: fix iterator typo when setting up cpus
+ This code loops over available cpus with "c", but then looks up the
+ cpu with "i". Fix the typo so the code works correctly with smp.
+
+ sim: mn10300: fix SMP compile
+ The igen tool sets up the SD define for code fragments to use, but
+ mn10300 was expecting "sd". Change all the igen related code to use
+ SD so it actually compiles.
+
+ sim: cpu: fix SMP msg prefix helper
+ This code fails to compile when SMP is enabled due to some obvious
+ errors. Fix those and change the logic to avoid CPP to prevent any
+ future rot from creeping back in.
+
+ sim: mips: clean up a bit after mips/configure removal
+ Now that there is no subdir configure script, we can clean up some
+ logic that was spread between the files.
+
+ sim: mips: move igen settings to top-level configure
+ This is the last bit of logic that exists in the mips configure
+ script, so move it to the top-level configure to kill it off.
+ We still have to move the Makefile.in igen logic to local.mk,
+ but this is a required first step for that.
+
+ sim: mips: namespace igen configure vars
+ To prepare moving this logic to the top-level configure, the vars
+ need to be namespaced. Do that here to make it easier to review.
+ Basically sim_xxx -> SIM_MIPS_XXX when a var is exported from the
+ configure script to the Makefile, and sim_xxx -> sim_mips_xxx when
+ the var is internal in the configure script.
+
+ sim: mips: add igen recursive dep
+ Make sure the igen tool exists before trying to compile the mips
+ subdir. This happens to work when mips has a subconfigure, but
+ hits a race condition when that is removed.
+
+ sim: mips: drop unused ENGINE_ISSUE_POSTFIX_HOOK
+ Nothing defines this, and it isn't called in all the engine runtimes,
+ so drop it entirely to avoid confusion.
+
+ sim: igen: drop move-if-changed usage
+ Now that igen itself has this logic, drop these custom build rules
+ to greatly simplify.
+
+ sim: igen: support in-place updates ourself
+ Every file that igen outputs is then processed with the move-if-changed
+ shell script. This creates a lot of boilerplate in the build and not an
+ insignificant amount of build-time overhead. Move the simple "is the file
+ changed" logic into igen itself.
+
+ sim: igen: constify itable data structures
+ These are const data arrays of strings and numbers. We don't want
+ or need them to be writable, so mark them all const.
+
+2022-12-25 GDB Administrator <gdbadmin@sourceware.org>
+
+ Automatic date update in version.in
+
+2022-12-24 Andrew Burgess <aburgess@redhat.com>
+
+ gdb/testsuite: fix buffer overflow in gdb.base/signed-builtin-types.exp
+ In commit:
+
+ commit 9f50fe0835850645bd8ea9bb1efe1fe6c48dfb12
+ Date: Wed Dec 7 15:55:25 2022 +0000
+
+ gdb/testsuite: new test for recent dwarf reader issue
+
+ A new test (gdb.base/signed-builtin-types.exp) was added that made use
+ of 'info sources' to figure out if the debug information for a
+ particular object file had been fully expanded or not. Unfortunately
+ some lines of the 'info sources' output can be very long, this was
+ observed on some systems where the debug information for the
+ dynamic-linker was installed, in this case, the list of source files
+ associated with the dynamic linker was so long it would cause expect's
+ internal buffer to overflow.
+
+ This commit switches from using 'info sources' to 'maint print
+ objfile', the output from the latter command is more compact, but
+ also, can be restricted to a single named object file.
+
+ With this change in place I am no longer seeing buffer overflow errors
+ from expect when running gdb.base/signed-builtin-types.exp.
+
+2022-12-24 Mike Frysinger <vapier@gentoo.org>
+
+ sim: or1k: move arch-specific settings to internal header
+ There's no need for these settings to be in sim-main.h which is shared
+ with common/ sim code, so move it all out to the existing or1k-sim.h.
+ Unfortunately, we can't yet drop the or1k-sim.h include from sim-main.h
+ as many of the generated CGEN files refer only to sim-main.h. We'll
+ have to improve the CGEN interface before we can make more progress,
+ but this is at least a minor improvement.
+
+2022-12-24 GDB Administrator <gdbadmin@sourceware.org>
+
+ Automatic date update in version.in
+
+2022-12-23 Tom Tromey <tom@tromey.com>
+
+ Use bool for dwarf2_has_info
+ This changes dwarf2_has_info to return bool.
+
+2022-12-23 Indu Bhagat <indu.bhagat@oracle.com>
+
+ libsframe: testsuite: fix memory leaks in testcases
+ ChangeLog:
+
+ * libsframe/testsuite/libsframe.decode/be-flipping.c: Free
+ SFrame buffer.
+ * libsframe/testsuite/libsframe.decode/frecnt-1.c: Likewise.
+ * libsframe/testsuite/libsframe.decode/frecnt-2.c: Likewise.
+
+2022-12-23 Indu Bhagat <indu.bhagat@oracle.com>
+
+ libsframe: fix a memory leak in sframe_decode
+ sframe_decode () needs to malloc a temporary buffer of the same size as
+ the input buffer (containing the SFrame section bytes) when endian
+ flipping is needed. The decoder keeps the endian flipped contents in
+ this buffer for its usage. This code is necessary when the target
+ endianneess is not the same as host endianness.
+
+ The malloc'd buffer needs to be kept track of, so that it can freed up in
+ sframe_decoder_free () later.
+
+ ChangeLog:
+
+ * libsframe/sframe-impl.h (struct sframe_decoder_ctx): Add new
+ member to keep track of the internally malloc'd buffer.
+ * libsframe/sframe.c (sframe_decoder_free): Free it up.
+ (sframe_decode): Update the reference to the buffer.
+
+2022-12-23 Simon Marchi <simon.marchi@polymtl.ca>
+
+ gdb/testsuite: remove MPFR detection in gdb.base/float128.exp
+ I see this fail since commit 991180627851 ("Use toplevel configure for
+ GMP and MPFR for gdb"):
+
+ FAIL: gdb.base/float128.exp: show configuration
+
+ The test fails to find --with-mpfr or --without-mpfr in the "show
+ configuration" output. Since MPFR has become mandatory, we can just
+ remove that check and simplify the test to assume MPFR support is there.
+
+ Change-Id: I4f3458470db0029705b390dfefed3a66dfc0633a
+ Approved-By: Tom de Vries <tdevries@suse.de>
+
+2022-12-23 Mike Frysinger <vapier@gentoo.org>
+
+ sim: m32r: move arch-specific settings to internal header
+ There's no need for these settings to be in sim-main.h which is shared
+ with common/ sim code, so move it all out to the existing m32r-sim.h.
+ Unfortunately, we can't yet drop the m32r-sim.h include from sim-main.h
+ as many of the generated CGEN files refer only to sim-main.h. We'll
+ have to improve the CGEN interface before we can make more progress,
+ but this is at least a minor improvement.
+
+ sim: bfin: move arch-specific settings to internal header
+ There's no need for these settings to be in sim-main.h which is shared
+ with common/ sim code, so drop the bfin.h include and move the remaining
+ bfin-specific settings into it.
+
+ sim: m68hc11: move arch-specific settings to internal header
+ There's no need for these settings to be in sim-main.h which is shared
+ with common/ sim code, so move it all out to a new header which only
+ this port will include.
+
+ sim: sh: move arch-specific settings to internal header
+ There's no need for these settings to be in sim-main.h which is shared
+ with common/ sim code, so move it all out to a new header which only
+ this port will include.
+
+ sim: mcore: move arch-specific settings to internal header
+ There's no need for these settings to be in sim-main.h which is shared
+ with common/ sim code, so move it all out to a new header which only
+ this port will include.
+
+ sim: h8300: move arch-specific settings to internal header
+ There's no need for these settings to be in sim-main.h which is shared
+ with common/ sim code, so move it all out to a new header which only
+ this port will include.
+
+ sim: pru: move arch-specific settings to internal header
+ There's no need for these settings to be in sim-main.h which is shared
+ with common/ sim code, so drop the pru.h include and move the remaining
+ pru-specific settings into it.
+
+2022-12-23 Mike Frysinger <vapier@gentoo.org>
+
+ sim: mn10300: standardize the arch-specific settings a little
+ Rename mn10300_sim.h to mn10300-sim.h to match other ports, and move most
+ of the arch-specific content out of sim-main.h to it. This isn't a big
+ win though as we still have to include the header in sim-main.h due to the
+ igen interface: it hardcodes including sim-main.h in its files. So until
+ we can fix that, we have to keep bleeding these settings into the common
+ codes.
+
+ Also take the opportunity to purge a lot of unused headers from these.
+ The local modules should already include the right headers, so there's
+ no need to force everyone to pull them in. A lot of this is a hold over
+ from the pre-igen days of this port.
+
+2022-12-23 Mike Frysinger <vapier@gentoo.org>
+
+ sim: microblaze: move arch-specific settings to internal header
+ There's no need for these settings to be in sim-main.h which is shared
+ with common/ sim code, so move it all out to a new header which only
+ this port will include.
+
+ sim: example-synacor: move arch-specific settings to internal header
+ There's no need for these settings to be in sim-main.h which is shared
+ with common/ sim code, so move it all out to a new header which only
+ this port will include.
+
+ sim: moxie: move arch-specific settings to internal header
+ There's no need for these settings to be in sim-main.h which is shared
+ with common/ sim code, so move it all out to a new header which only
+ this port will include.
+
+2022-12-23 Mike Frysinger <vapier@gentoo.org>
+
+ sim: riscv: move arch-specific settings to internal header
+ There's no need for these settings to be in sim-main.h which is shared
+ with common/ sim code, so move it all out to a new header which only
+ this port will include.
+
+ We can also move the machs.h include out since the model logic was all
+ generalized from compile-time to runtime last year.
+
+2022-12-23 Mike Frysinger <vapier@gentoo.org>
+
+ sim: v850: standardize the arch-specific settings a little
+ Rename v850_sim.h to v850-sim.h to match other ports, and move most
+ of the arch-specific content out of sim-main.h to it. This isn't a
+ big win though as we still have to include the header in sim-main.h
+ due to the igen interface: it hardcodes including sim-main.h in its
+ files. So until we can fix that, we have to keep bleeding these
+ settings into the common codes.
+
+2022-12-23 Mike Frysinger <vapier@gentoo.org>
+
+ sim: msp430: move arch-specific settings to internal header
+ There's no need for these settings to be in sim-main.h which is shared
+ with common/ sim code, so drop the msp430-sim.h include and move it to
+ the few files that actually need it.
+
+ While we're here, drop redundant includes from sim-main.h:
+ * sim-config.h & sim-types.h included by sim-basics.h already
+ * sim-engine.h included by sim-base.h already
+ And move sim-options.h to the one file that needs it.
+
+2022-12-23 Mike Frysinger <vapier@gentoo.org>
+
+ sim: ft32: move arch-specific settings to internal header
+ There's no need for these settings to be in sim-main.h which is shared
+ with common/ sim code, so drop the ft32-sim.h include and move it to
+ the few files that actually need it.
+
+2022-12-23 Mike Frysinger <vapier@gentoo.org>
+
+ sim: d10v: move arch-specific settings to internal header
+ There's no need for these settings to be in sim-main.h which is shared
+ with common/ sim code, so drop the d10v_sim.h include and move it to
+ the few files that actually need it.
+
+ Also rename the file to standardize it a bit better with other ports.
+
+2022-12-23 Mike Frysinger <vapier@gentoo.org>
+
+ sim: cr16: move arch-specific settings to internal header
+ There's no need for these settings to be in sim-main.h which is shared
+ with common/ sim code, so drop the cr16_sim.h include and move it to
+ the few files that actually need it.
+
+ Also rename the file to standardize it a bit better with other ports.
+
+2022-12-23 Mike Frysinger <vapier@gentoo.org>
+
+ sim: arm: move arch-specific settings to internal header
+ There's no need for these settings to be in sim-main.h which is shared
+ with common/ sim code, so move it all out to a new header which only
+ this port will include.
+
+ The BIT override would be better in the place where it's redefined, so
+ move it to armdefs.h instead.
+
+2022-12-23 Mike Frysinger <vapier@gentoo.org>
+
+ sim: aarch64: move arch-specific settings to internal header
+ There's no need for these settings to be in sim-main.h which is shared
+ with common/ sim code, so move it all out to a new header which only
+ this port will include.
+
+ While we're here, drop redundant includes from sim-main.h:
+ * sim-types.h is included by sim-base.h already
+ * sim-base.h is included twice
+ * sim-io.h is included by sim-base.h already
+
+2022-12-23 Mike Frysinger <vapier@gentoo.org>
+
+ sim: avr: move arch-specific settings to internal header
+ There's no need for these settings to be in sim-main.h which is shared
+ with common/ sim code, so move it all out to a new header which only
+ this port will include.
+
+2022-12-23 Nick Clifton <nickc@redhat.com>
+
+ Fix illegal memory access parsing corrupt DWARF information.
+ PR 29936
+ * dwarf2.c (concat_filename): Fix check for a directory index off
+ the end of the directory table.
+
+2022-12-23 Eli Zaretskii <eliz@gnu.org>
+
+ Fix MinGW build using mingw.org's MinGW
+ This allows to build GDB even though the default value of
+ _WIN32_WINNT is lower than the one needed to expose some
+ new APIs used here, and leave the test for their actual
+ support to run time.
+ * gdb/nat/windows-nat.c (EXTENDED_STARTUPINFO_PRESENT): Define if
+ not defined.
+ (create_process_wrapper): Use 'gdb_lpproc_thread_attribute_list'
+ instead of 'PPROC_THREAD_ATTRIBUTE_LIST' (which might not be defined
+ at compile time). This fixes compilation error using mingw.org's
+ MinGW.
+
+2022-12-23 Mark Harmstone <mark@harmstone.com>
+
+ ld: Write linker symbols in PDB
+
+ ld: Copy other symbols into PDB file
+
+ ld: Write globals stream in PDB
+
+ ld: Parse LF_UDT_SRC_LINE records when creating PDB file
+
+ ld: Write types into IPI stream of PDB
+
+ ld: Write types into TPI stream of PDB
+
+ ld: Write DEBUG_S_LINES entries in PDB file
+
+ ld: Fix segfault in populate_publics_stream
+
+ ld: Write DEBUG_S_FILECHKSMS entries in PDBs
+
+ ld: Generate PDB string table
+
+2022-12-23 Alan Modra <amodra@gmail.com>
+
+ pdb build fixes
+ Enable compilation of ld/pdb.c just for x86, as is done for bfd/pdb.c.
+ This reduces the size of ld and is necessary with the following
+ patches that call a COFF-only bfd function from ld/pdb.c. Without it
+ we'd break every non-COFF target build.
+
+2022-12-23 Mike Frysinger <vapier@gentoo.org>
+
+ sim: lm32/m32r: drop redundant opcode/cgen.h include
+ The xxx-desc.h header file already includes this, and it's how the
+ other cgen ports are getting it, so drop it from these two.
+
+ sim: ppc: drop unused types from sim-main.h
+ The common sim headers should define these for us already, so there's
+ no need for the ppc header to set them up.
+
+ sim: cgen: move symcat.h include to where it's used
+ Move this out of the global sim-main.h and to the few files that
+ actually use functions from it. Only the cgen ports were pulling
+ this, so this makes cgen & non-cgen behave more the same.
+
+ sim: cgen: move cgen-types.h include to cgen-defs.h
+ The cgen-types.h header sets up types that are needed by cgen-defs.h,
+ so move the include out of sim-main.h and to that header. It might
+ be needed in other specific modules, but for now let's kick it out of
+ sim-main.h to make some progress. Things still build with just this.
+
+2022-12-23 Mike Frysinger <vapier@gentoo.org>
+
+ Revert "sim: mn10300: drop unused sim-main.c"
+ This reverts commit 681a422b855e4b20086554b170dae051361f00c7.
+
+ I missed that this was included via common/sim-inline.c. I thought
+ I had grepped the top of the tree, but I must have only done mn10300.
+
+ Add a comment to make it clear where/how this file is used.
+
+2022-12-23 Mike Frysinger <vapier@gentoo.org>
+
+ sim: mn10300: drop unused sim-main.c
+ Nothing compiles or references this, so punt it.
+
+ sim: endian: move bfd.h from header to source
+ The bfd APIs are used only by sim-n-endian.h which is only included by
+ sim-endian.c, so move the bfd.h include there and out of sim-endian.h
+ which is included by many other modules.
+
+2022-12-23 Mike Frysinger <vapier@gentoo.org>
+
+ sim: move bfd.h include out of sim-main.h
+ Not all arches include this in sim-main.h, and the ones that do don't
+ actually use bfd defines in the sim-main.h header. Prune it to make
+ sim-main.h simpler so we can kill it off entirely in the future.
+
+ We add the include to the files that utilize e.g. bfd_vma though.
+
+2022-12-23 Mike Frysinger <vapier@gentoo.org>
+
+ sim: mcore: replace custom "word" type with int32_t
+ This is a 32-bit architecture with 32-bit registers, so replace the
+ custom "word" long int typedef with an explicit int32_t. This is
+ a correctness fix since long will be 64-bits on most 64-bit hosts.
+
+ sim: moxie: replace custom "word" type with int32_t
+ This is a 32-bit architecture with 32-bit registers, so replace the
+ custom "word" int typedef with an explicit int32_t. Practically
+ speaking, this produces the same code, but it should hopefully make
+ it easier to merge common code in the future.
+
+ sim: cr16/d10v/mcore/moxie: clean up unused word & uword types
+ Nothing actually uses these, so punt them. Some of the ports are
+ using local "word" types, but we'll clean those up in a follow up.
+
+ sim: mips: trim redundant igen settings
+ These variables are setting the same value as the defaults. Trim
+ this redundant logic to make it easier to see the real differences
+ so we can try to keep unifying cases.
+
+ sim: mips: merge mips64* with existing multi-run build
+ Change the default (unhandled) mips64* targets to use the existing
+ mips64 multi-run build. It already handles the formats, we just
+ have to list the mips8000 bfd for it.
+
+ sim: mips: merge mips64vr5000 with existing multi-run build
+ The existing mips64vr-* multi-run build already handles mips5000
+ targets, so reuse that for mips64vr5* targets too. This moves
+ more logic from build-time to runtime so we can have a single
+ binary that supports many targets.
+
+2022-12-23 Nelson Chu <nelson@rivosinc.com>
+
+ RISC-V: Relax the order checking for the architecture string
+ * riscv-toolchain-conventions,
+ PR, https://github.com/riscv-non-isa/riscv-toolchain-conventions/pull/14
+ Issue, https://github.com/riscv-non-isa/riscv-toolchain-conventions/issues/11
+
+ * Refer to the commit afc41ffb,
+ RISC-V: Reorder the prefixed extensions which are out of order.
+
+ In the past we only allow to reorder the prefixed extensions. But according
+ to the PR 14 in the riscv-toolchain-convention, we can also relax the order
+ checking to allow the whole extensions be written out of orders, including
+ the single standard extensions and the prefixed multi-letter extensions.
+ Just that we still need to follow the following rules as usual,
+
+ 1. prefixed extensions need to be seperated with `_'.
+ 2. prefixed extensions need complete <major>.<minor> version if set.
+
+ Please see the details in the march-ok-reorder gas testcase.
+
+ Passed the riscv-gnu-toolchain regressions.
+
+ bfd/
+ * elfxx-riscv.c (enum riscv_prefix_ext_class): Changed RV_ISA_CLASS_UNKNOWN
+ to RV_ISA_CLASS_SINGLE, since everything that does not belong to the
+ multi-keyword will possible be a single extension for the current parser.
+ (parse_config): Likewise.
+ (riscv_get_prefix_class): Likewise.
+ (riscv_compare_subsets): Likewise.
+ (riscv_parse_std_ext): Removed, and merged with riscv_parse_prefixed_ext
+ into riscv_parse_extensions.
+ (riscv_parse_prefixed_ext): Likewise.
+ (riscv_parse_subset): Only need to call riscv_parse_extensions to parse
+ both single standard and prefixed extensions.
+ gas/
+ * testsuite/gas/riscv/march-fail-order-std.d: Removed since the relaxed
+ order checking.
+ * testsuite/gas/riscv/march-fail-order-std.l: Likewise.
+ * testsuite/gas/riscv/march-fail-order-x-std.d: Likewise.
+ * testsuite/gas/riscv/march-fail-order-z-std.d: Likewise.
+ * testsuite/gas/riscv/march-fail-order-zx-std.l: Likewise.
+ * testsuite/gas/riscv/march-fail-unknown-std.l: Updated.
+ * testsuite/gas/riscv/march-ok-reorder.d: New testcase.
+
+2022-12-23 Mike Frysinger <vapier@gentoo.org>
+
+ sim: drop unused SIM_ADDR type [PR sim/7504]
+ Now that sim APIs either use 64-bit addresses all the time, or more
+ appropriate target-specific types, drop this now-unused 32-bit-only
+ address type.
+
+ Bug: https://sourceware.org/PR7504
+
+2022-12-23 Mike Frysinger <vapier@gentoo.org>
+
+ sim: mips: switch from SIM_ADDR to address_word
+ The latter type matches the address size configured for this sim.
+
+ Also take the opportunity to simplify printf logic by leveraging
+ PRI* macros.
+
+2022-12-23 Mike Frysinger <vapier@gentoo.org>
+
+ sim: v850: switch from SIM_ADDR to address_word
+ The latter type matches the address size configured for this sim.
+
+2022-12-23 Mike Frysinger <vapier@gentoo.org>
+
+ sim: switch sim_{read,write} APIs to 64-bit all the time [PR sim/7504]
+ We've been using SIM_ADDR which has always been 32-bit. This means
+ the upper 32-bit address range in 64-bit sims is inaccessible. Use
+ 64-bit addresses all the time since we want the APIs to be stable
+ regardless of the active arch backend (which can be 32 or 64-bit).
+
+ The length is also 64-bit because it's completely feasible to have
+ a program that is larger than 4 GiB in size/image/runtime. Forcing
+ the caller to manually chunk those accesses up into 4 GiB at a time
+ doesn't seem useful to anyone.
+
+ Bug: https://sourceware.org/PR7504
+
+2022-12-23 Mike Frysinger <vapier@gentoo.org>
+
+ sim: use bfd_vma when reading start addr from bfd info
+ Since SIM_ADDR is always 32-bit, it might truncate the address with
+ 64-bit ELFs. Since we load that addr from the bfd, use the bfd_vma
+ type which matches the bfd_get_start_address API.
+
+ sim: m32r: include sim-hw.h for sim_hw_parse
+
+2022-12-23 Alan Modra <amodra@gmail.com>
+
+ COFF build-id writes uninitialised data to file
+ 1) The first write in write_build_id wrote rubbish past the struct
+ external_IMAGE_DEBUG_DIRECTORY, which was later overwritten with
+ correct data. No user visible problem there, except that tools like
+ valgrind complain.
+ 2) The size for the pdb name was incorrectly calculated.
+
+ * emultempl/pe.em (write_build_id): Write the debug directory,
+ not the entire section contents.
+ (setup_build_id): Add size for the base name of pdb_name, not
+ the full path.
+ * emultempl/pep.em: Likewise.
+ * testsuite/ld-pe/pdb2-section-contrib.d: Update.
+
+2022-12-23 Mike Frysinger <vapier@gentoo.org>
+
+ sim: mips: merge mips64vr4300 with existing multi-run build
+ The existing mips64vr-* multi-run build already handles mips4300
+ targets, so reuse that for mips64vr43* targets too. This moves
+ more logic from build-time to runtime so we can have a single
+ binary that supports many targets.
+
+2022-12-23 GDB Administrator <gdbadmin@sourceware.org>
+
+ Automatic date update in version.in
+
+2022-12-22 Indu Bhagat <indu.bhagat@oracle.com>
+
+ sframe: doc: update documentation for pauth key in SFrame FDE
+ ChangeLog:
+
+ * libsframe/doc/sframe-spec.texi
+
+2022-12-22 Indu Bhagat <indu.bhagat@oracle.com>
+
+ gas: sframe: testsuite: add testcase for .cfi_b_key_frame
+ This is actually a composite test that checks SFrame unwind information
+ generation for both the .cfi_negate_ra_state and .cfi_b_key_frame
+ directives on aarch64.
+
+ ChangeLog:
+
+ * testsuite/gas/cfi-sframe/cfi-sframe-aarch64-pac-ab-key-1.d:
+ New test.
+ * testsuite/gas/cfi-sframe/cfi-sframe-aarch64-pac-ab-key-1.s:
+ Likewise.
+ * testsuite/gas/cfi-sframe/cfi-sframe.exp: Run new test.
+
+2022-12-22 Indu Bhagat <indu.bhagat@oracle.com>
+
+ objdump/readelf: sframe: emit marker for SFrame FDE with B key
+ ChangeLog:
+
+ * libsframe/sframe-dump.c (is_sframe_abi_arch_aarch64): New
+ definition.
+ (dump_sframe_func_with_fres): Emit a string if B key is used.
+
+2022-12-22 Indu Bhagat <indu.bhagat@oracle.com>
+
+ gas: sframe: add support for .cfi_b_key_frame
+ Gather the information from the DWARF FDE on whether frame's return
+ addresses are signed using the B key or A key. Reflect the information in
+ the SFrame counterpart data structure, the SFrame FDE.
+
+ ChangeLog:
+
+ * gas/gen-sframe.c (get_dw_fde_pauth_b_key_p): New definition.
+ (sframe_v1_set_func_info): Add new argument for pauth_key.
+ (sframe_set_func_info): Likewise.
+ (output_sframe_funcdesc): Likewise.
+ * gas/gen-sframe.h (struct sframe_version_ops): Add new argument
+ to the function pointer declaration.
+ * gas/sframe-opt.c (sframe_convert_frag): Handle pauth_key.
+
+2022-12-22 Indu Bhagat <indu.bhagat@oracle.com>
+
+ sframe.h: add support for .cfi_b_key_frame
+ ARM 8.3 provides five separate keys that can be used to authenticate
+ pointers. There are two key for executable (instruction) pointers. The
+ enum pointer_auth_key in gas/config/tc-aarch64.h currently holds two keys:
+ enum pointer_auth_key {
+ AARCH64_PAUTH_KEY_A,
+ AARCH64_PAUTH_KEY_B
+ };
+
+ Analogous to the above, in SFrame format V1, a bit is reserved in the SFrame
+ FDE to indicate which key is used for signing the frame's return addresses:
+ - SFRAME_AARCH64_PAUTH_KEY_A has a value of 0
+ - SFRAME_AARCH64_PAUTH_KEY_B has a value of 1
+
+ Note that the information in this bit will always be used along with the
+ mangled_ra_p bit, the latter indicates whether the return addresses are
+ mangled/contain PAC auth bits.
+
+ include/ChangeLog:
+
+ * sframe.h (SFRAME_AARCH64_PAUTH_KEY_A): New definition.
+ (SFRAME_AARCH64_PAUTH_KEY_B): Likewise.
+ (SFRAME_V1_FUNC_INFO): Adjust to accommodate pauth_key.
+ (SFRAME_V1_FUNC_PAUTH_KEY): New macro.
+ (SFRAME_V1_FUNC_INFO_UPDATE_PAUTH_KEY): Likewise.
+
+2022-12-22 Jan Beulich <jbeulich@suse.com>
+
+ gas: re-arrange listing output for .irp and alike
+ It is kind of odd to have the expansions of such constructs ahead of
+ their definition in listings with macro expansion enabled. Adjust this
+ by pulling ahead the output of the definition lines, taking care to
+ avoid producing a listing line for (non-existing) line 0 when the source
+ is stdin.
+
+ Note that with the code movement the conditional operator isn't
+ necessary anymore - list->line now match up.
+
+2022-12-22 Jan Beulich <jbeulich@suse.com>
+
+ x86: correct/improve TSX controls
+ TSXLDTRK takes RTM as a prereq. Additionally introduce an umbrella "tsx"
+ extension option covering both RTM and HLE, paralleling the "abm" one we
+ already have.
+
+2022-12-22 Jan Beulich <jbeulich@suse.com>
+
+ x86: add dependencies on SVME
+ SEV-ES is an extension to SVME. SNP in turn is an extension to SEV-ES,
+ and yet in turn RMPQUERY is a SNP extension.
+
+ Note that cpu_arch[] has no SNP entry, so CPU_ANY_SNP_FLAGS remains
+ unused (just like CPU_SNP_FLAGS already is).
+
+2022-12-22 Jan Beulich <jbeulich@suse.com>
+
+ x86: add dependencies on VMX
+ Both EPT and VMFUNC are extensions to VMX.
+
+2022-12-22 Jan Beulich <jbeulich@suse.com>
+
+ x86: correct XSAVE* dependencies
+ Like various other features AMX-TILE takes XSAVE as a prereq.
+
+ XSAVES, unconditionally using compacted format, in turn effectively
+ takes XSAVEC as a prereq (an SDM clarification to this effect is in the
+ works).
+
+2022-12-22 Jan Beulich <jbeulich@suse.com>
+
+ x86: correct dependencies of a few AVX512 sub-features
+ Like AVX512-FP16, several other extensions require wider than 16-bit
+ mask registers. As a result they take AVX512BW as a prereq, not (just)
+ AVX512F. Which in turn points out wrong expectations in the noavx512-1
+ testcase.
+
+ x86: rework noavx512-1 testcase
+ So far the set of ".noavx512*" has been accumulating, which isn't ideal.
+ In particular this hides issues with dependencies between features.
+ Switch back to the default ISA before disabling a particular subset.
+ Furthermore limit redundancy by wrapping the repeated block of insns in
+ an .irp.
+
+ x86: add dependencies on AVX2
+ Like AVX-VNNI both VAES and VPCLMUL take AVX2 as a prereq, for operating
+ on up to 256-bit packed integer vectors.
+
+ x86: correct SSE dependencies
+ SSE itself takes FXSR as a prereq. Like AES, PCLMUL, and SHA both GFNI
+ and KL take SSE2 as a prereq, for operating on packed integers. And
+ while correcting KL also record it as a prereq to WIDEKL.
+
+2022-12-22 Jan Beulich <jbeulich@suse.com>
+
+ x86: correct what gets disabled by certain ".arch .no*"
+ Features with prereqs as well as features with dependents cannot re-use
+ CPU_*_MASK for the 3rd argument of SUBARCH() - they need to use
+ CPU_ANY_*_MASK in order to avoid disabling too many (when there are
+ prereqs) and/or too few (when there are dependents) features.
+
+ Generally any CPU_ANY_*_MASK which exist should not remain unused.
+ Exceptions are
+ - FISTTP which has no corresponding entry in cpu_arch[],
+ - IAMCU which is a base architecture and hence uses ARCH(), not
+ SUBARCH() (only extensions can be disabled, but unlike for Cpu*86 it
+ would be a little more clumsy to suppress generating of the #define).
+
+2022-12-22 Jan Beulich <jbeulich@suse.com>
+
+ x86: re-work ISA extension dependency handling
+ Getting both forward and reverse ISA dependencies right / consistent has
+ been a permanent source of mistakes. Reduce what needs specifying
+ manually to just the direct forward dependencies. Transitive forward
+ dependencies as well as reverse ones are now derived and hence cannot go
+ out of sync anymore (at least in the vast majority of cases; there are a
+ few special cases to still take care of manually). In the course of this
+ several CPU_ANY_*_FLAGS disappear, requiring adjustment to the
+ assembler's cpu_arch[].
+
+ Note that to retain the correct reverse dependency of AVX512F wrt
+ AVX512-VP2INTERSECT, the latter has the previously missing AVX512F
+ prereq added.
+
+ Note further that to avoid adding the following undue prereqs:
+ * ATHLON, K8, and AMDFAM10 gain CMOV and FXSR,
+ * IAMCU gains 387,
+ auxiliary table entries (including a colon-separated modifier) are
+ introduced in addition to the ones representing from converting the old
+ table.
+
+ To maintain forward-only dependencies between AVX (XOP) and SSE* (SSE4a)
+ (i.e. "nosse" not disabling AVX), reverse dependency tracking is
+ artifically suppressed.
+
+ As a side effect disabling of SSE or SSE2 will now also disable AES,
+ PCLMUL, and SHA (respective elements were missing from
+ CPU_ANY_SSE2_FLAGS).
+
+2022-12-22 Mike Frysinger <vapier@gentoo.org>
+
+ sim: mips: match target on cpu settings
+ We don't need to enforce larger target settings when the only thing
+ the sim should care about is the CPU target. So reduce most of the
+ target matches to only check the CPU.
+
+ sim: mips: move fpu bitsize defines to top-level configure
+ This drops support for the --enable-sim-float configure option,
+ but it's not clear anyone ever actually used that. Eventually
+ we'll want this to be a runtime option anyways.
+
+ sim: mips: move bitsize defines to top-level configure
+ Since the msb value is always defined as the wordsize-1, stop
+ hardcoding that value directly, and use a CPP value instead.
+
+ sim: mips: move subtarget defines to top-level configure
+ We want to kill off mips/configure entirely. Move this small part
+ out now to get started.
+
+ sim: mips: always resolve active bfd mach dynamically
+ Don't assume that the default bfd that we configured for is the one
+ that is always active when running a program. We already have access
+ to the real runtime value, so use it directly. This simplifies the
+ code quite a bit, and will make it easier to support multiple mach's
+ in a single binary.
+
+ sim: hw-config.h: move generation to top-level
+ In order to compile arch objects from the top-level, we need to
+ generate the hw-config.h header, so move that logic up to the top
+ level first.
+
+ sim: build: hoist lists of hw devices up
+ We need these in the top-level to generate libsim.a, but also in the
+ subdirs to generate hw-config.h. Move it to the local.mk, and pass
+ it down when running recursive make. This avoids duplication, and
+ makes it available to both. We can simplify this once we move the
+ various steps up to the top-level too.
+
+ sim: build: hoist lists of common objects up
+ In order to create libsim.a in the common dir, we need the list of
+ objects for each target. To avoid duplicating the list with the
+ recursive make in each port, pass it down as a variable. This is
+ a temporary hack until the top-level creates libsim.a for ports.
+
+2022-12-22 GDB Administrator <gdbadmin@sourceware.org>
+
+ Automatic date update in version.in
+
+2022-12-21 Alan Modra <amodra@gmail.com>
+
+ PR29925, Memory leak in find_abstract_instance
+ The testcase in the PR had a variable with both DW_AT_decl_file and
+ DW_AT_specification, where the DW_AT_specification also specified
+ DW_AT_decl_file. This leads to a memory leak as the file name is
+ malloced and duplicates are not expected.
+
+ I've also changed find_abstract_instance to not use a temp for "name",
+ because that can result in a change in behaviour from the usual last
+ of duplicate attributes wins.
+
+ PR 29925
+ * dwarf2.c (find_abstract_instance): Delete "name" variable.
+ Free *filename_ptr before assigning new file name.
+ (scan_unit_for_symbols): Similarly free func->file and
+ var->file before assigning.
+
+2022-12-21 Andrew Pinski <apinski@marvell.com>
+
+ Fix compiling of top.c
+ When I moved my last patch forward, somehow I missed removing
+ the #endif for the HAVE_LIBMPFR case.
+
+ Committed as obvious after a quick build.
+
+ gdb/ChangeLog:
+ * top.c: Remove the extra #endif which was missed.
+
+2022-12-21 Andrew Pinski <apinski@marvell.com>
+
+ Use toplevel configure for GMP and MPFR for gdb
+ This patch uses the toplevel configure parts for GMP/MPFR for
+ gdb. The only thing is that gdb now requires MPFR for building.
+ Before it was a recommended but not required library.
+ Also this allows building of GMP and MPFR with the toplevel
+ directory just like how it is done for GCC.
+ We now error out in the toplevel configure of the version
+ of GMP and MPFR that is wrong.
+
+ OK after GDB 13 branches? Build gdb 3 ways:
+ with GMP and MPFR in the toplevel (static library used at that point for both)
+ With only MPFR in the toplevel (GMP distro library used and MPFR built from source)
+ With neither GMP and MPFR in the toplevel (distro libraries used)
+
+ Changes from v1:
+ * Updated gdb/README and gdb/doc/gdb.texinfo.
+ * Regenerated using unmodified autoconf-2.69
+
+ Thanks,
+ Andrew Pinski
+
+ ChangeLog:
+ * Makefile.def: Add configure-gdb dependencies
+ on all-gmp and all-mpfr.
+ * configure.ac: Split out MPC checking from MPFR.
+ Require GMP and MPFR if the gdb directory exist.
+ * Makefile.in: Regenerate.
+ * configure: Regenerate.
+
+ gdb/ChangeLog:
+
+ PR bug/28500
+ * configure.ac: Remove AC_LIB_HAVE_LINKFLAGS
+ for gmp and mpfr.
+ Use GMPLIBS and GMPINC which is provided by the
+ toplevel configure.
+ * Makefile.in (LIBGMP, LIBMPFR): Remove.
+ (GMPLIBS, GMPINC): Add definition.
+ (INTERNAL_CFLAGS_BASE): Add GMPINC.
+ (CLIBS): Exchange LIBMPFR and LIBGMP
+ for GMPLIBS.
+ * target-float.c: Make the code conditional on
+ HAVE_LIBMPFR unconditional.
+ * top.c: Remove code checking HAVE_LIBMPFR.
+ * configure: Regenerate.
+ * config.in: Regenerate.
+ * README: Update GMP/MPFR section of the config
+ options.
+ * doc/gdb.texinfo: Likewise.
+
+ Bug: https://sourceware.org/bugzilla/show_bug.cgi?id=28500
+
+2022-12-21 Bruno Larsen <blarsen@redhat.com>
+
+ gdb/c++: validate 'using' directives based on the current line
+ When asking GDB to print a variable from an imported namespace, we only
+ want to see variables imported in lines that the inferior has already
+ gone through, as is being tested last in gdb.cp/nsusing.exp. However
+ with the proposed change to gdb.cp/nsusing.exp, we get the following
+ failures:
+
+ (gdb) PASS: gdb.cp/nsusing.exp: continue to breakpoint: marker10 stop
+ print x
+ $9 = 911
+ (gdb) FAIL: gdb.cp/nsusing.exp: print x, before using statement
+ next
+ 15 y += x;
+ (gdb) PASS: gdb.cp/nsusing.exp: using namespace M
+ print x
+ $10 = 911
+ (gdb) PASS: gdb.cp/nsusing.exp: print x, only using M
+
+ Showing that the feature wasn't functioning properly, it just so
+ happened that gcc ordered the namespaces in a convenient way.
+ This happens because GDB doesn't take into account the line where the
+ "using namespace" directive is written. So long as it shows up in the
+ current scope, we assume it is valid.
+
+ To fix this, add a new member to struct using_direct, that stores the
+ line where the directive was written, and a new function that informs if
+ the using directive is valid already.
+
+ Unfortunately, due to a GCC bug, the failure still shows up. Compilers
+ that set the declaration line of the using directive correctly (such as
+ Clang) do not show such a bug, so the test includes an XFAIL for gcc
+ code.
+
+ Finally, because the final test of gdb.cp/nsusing.exp has turned into
+ multiple that all would need XFAILs for older GCCs (<= 4.3), and that
+ GCC is very old, if it is detected, the test just exits early.
+
+ Approved-by: Tom Tromey <tom@tromey.com>
+
+2022-12-21 Nick Clifton <nickc@redhat.com>
+
+ Updated Romanian translation for the BFD sub-directory.
+
+ Fix an attempt to allocate an unreasonably large amount of memory when parsing a corrupt ELF file.
+ PR 29924
+ * objdump.c (load_specific_debug_section): Check for excessively
+ large sections.
+
+ Keep the .drectve section when performing a relocateable link.
+ PR 29900
+ * scripttempl/pe.sc: Keep the .drectve section when performing a
+ relocateable link.
+ * scripttempl/pep.sc: Likewise.
+
+2022-12-21 Jan Beulich <jbeulich@suse.com>
+
+ x86: rename CheckRegSize to CheckOperandSize
+ While originally indeed used for register size checking only, the
+ attribute has been used for memory operand size checking as well already
+ for quite a while, with more such uses recently having been added.
+
+ gprofng/testsuite: restrict testing to native configurations
+ The binaries involved in testing gprofng are native ones, and hence a
+ cross build of binutils won't really test intended functionality. Since
+ this testing takes quite a bit of time (typically more than running all
+ of binutils, gas, and ld testsuites together), restrict the testing to
+ native configurations only.
+
+2022-12-21 Alan Modra <amodra@gmail.com>
+
+ enable-non-contiguous-regions warnings
+ The warning about discarded sections in elf_link_input_bfd doesn't
+ belong there since the code is dealing with symbols. Multiple symbols
+ in a discarded section will result in multiple identical warnings
+ about the section. Move the warning to a new function in ldlang.c.
+
+ The patch also tidies the warning quoting of section and file names,
+ consistently using `%pA' and `%pB'. I'm no stickler for one style of
+ section and file name quoting, but they ought to be consistent within
+ a warning, eg. see the first one fixed in ldlang.c, and when a warning
+ is emitted for multiple targets they all ought to use exactly the same
+ format string to reduce translation work. elf64-ppc.c loses the
+ build_one_stub errors since we won't get there before hitting the
+ fatal errors in size_one_stub.
+
+ bfd/
+ * elflink.c (elf_link_input_bfd): Don't warn here about
+ discarded sections.
+ * elf32-arm.c (arm_build_one_stub): Use consistent style in
+ --enable-non-contiguous-regions error.
+ * elf32-csky.c (csky_build_one_stub): Likewise.
+ * elf32-hppa.c (hppa_build_one_stub): Likewise.
+ * elf32-m68hc11.c (m68hc11_elf_build_one_stub): Likewise.
+ * elf32-m68hc12.c (m68hc12_elf_build_one_stub): Likewise.
+ * elf32-metag.c (metag_build_one_stub): Likewise.
+ * elf32-nios2.c (nios2_build_one_stub): Likewise.
+ * elfnn-aarch64.c (aarch64_build_one_stub): Likewise.
+ * xcofflink.c (xcoff_build_one_stub): Likewise.
+ * elf64-ppc.c (ppc_size_one_stub): Likewise.
+ (ppc_build_one_stub): Delete dead code.
+ ld/
+ * ldlang.c (lang_add_section): Use consistent style in
+ --enable-non-contiguous-regions warnings.
+ (size_input_section): Likewise.
+ (warn_non_contiguous_discards): New function.
+ (lang_process): Call it.
+ * testsuite/ld-arm/non-contiguous-arm.d: Update.
+ * testsuite/ld-arm/non-contiguous-arm4.d: Update.
+ * testsuite/ld-arm/non-contiguous-arm7.d: Add
+ --enable-non-contiguous-regions-warnings.
+ * testsuite/ld-arm/non-contiguous-arm7.err: New.
+ * testsuite/ld-powerpc/non-contiguous-powerpc.d: Update.
+ * testsuite/ld-powerpc/non-contiguous-powerpc64.d: Update.
+
+2022-12-21 Alan Modra <amodra@gmail.com>
+
+ PR29922, SHT_NOBITS section avoids section size sanity check
+ PR 29922
+ * dwarf2.c (find_debug_info): Ignore sections without
+ SEC_HAS_CONTENTS.
+
+2022-12-21 Mike Frysinger <vapier@gentoo.org>
+
+ sim: fully merge sim_cpu_base into sim_cpu
+ Now that all ports have migrated to the new framework, drop support
+ for the old sim_cpu_base layout. There's a lot of noise here, so
+ it's been split into a dedicated commit.
+
+ sim: enable common sim_cpu usage everywhere
+ All ports should be migrated now. Drop the SIM_HAVE_COMMON_SIM_CPU
+ knob and require it be used everywhere now.
+
+ sim: or1k: invert sim_cpu storage
+ The cpu.h change is in generated cgen code, but that has been sent
+ upstream too, so the next regen should include it automatically.
+
+ sim: m32r: invert sim_cpu storage
+ The cpu*.h changes are in generated cgen code, but that has been sent
+ upstream too, so the next regen should include it automatically.
+
+ sim: lm32: invert sim_cpu storage
+ The cpu.h change is in generated cgen code, but that has been sent
+ upstream too, so the next regen should include it automatically.
+
+ sim: iq2000: invert sim_cpu storage
+ The cpu.h change is in generated cgen code, but that has been sent
+ upstream too, so the next regen should include it automatically.
+
+ sim: frv: invert sim_cpu storage
+ The cpu.h change is in generated cgen code, but that has been sent
+ upstream too, so the next regen should include it automatically.
+
+ sim: cris: invert sim_cpu storage
+ The cpu*.h changes are in generated cgen code, but that has been sent
+ upstream too, so the next regen should include it automatically.
+
+ sim: bpf: invert sim_cpu storage
+ The cpu.h change is in generated cgen code, but that has been sent
+ upstream too, so the next regen should include it automatically.
+
+ sim: cgen: prep for inverting sim_cpu storage
+ Some common cgen code changes to allow cgen ports to invert their
+ sim_cpu storage one-by-one.
+
+ sim: riscv: invert sim_cpu storage
+
+ sim: pru: invert sim_cpu storage
+
+ sim: example-synacor: invert sim_cpu storage
+
+ sim: h8300: invert sim_cpu storage
+
+ sim: m68hc11: invert sim_cpu storage
+
+ sim: mips: invert sim_cpu storage
+
+ sim: v850: invert sim_cpu storage
+
+ sim: mcore: invert sim_cpu storage
+
+ sim: aarch64: invert sim_cpu storage
+
+ sim: microblaze: invert sim_cpu storage
+
+ sim: avr: invert sim_cpu storage
+
+ sim: moxie: invert sim_cpu storage
+
+ sim: msp430: invert sim_cpu storage
+
+ sim: ft32: invert sim_cpu storage
+
+ sim: bfin: invert sim_cpu storage
+
+2022-12-21 Mike Frysinger <vapier@gentoo.org>
+
+ sim: sim_cpu: invert sim_cpu storage
+ Currently all ports have to declare sim_cpu themselves in their
+ sim-main.h and then embed the common sim_cpu_base in it. This
+ dynamic makes it impossible to share common object code among
+ multiple ports because the core data structure is always different.
+
+ Let's invert this relationship: common code declares sim_cpu, and
+ the port uses the new arch_data field for its per-cpu state.
+
+ This is the first in a series of changes: it adds a define to select
+ between the old & new layouts, then converts all the ports that don't
+ need custom state over to the new layout. This includes mn10300 that,
+ while it defines custom fields in its cpu struct, never uses them.
+
+2022-12-21 Mike Frysinger <vapier@gentoo.org>
+
+ sim: move register headers into sim/ namespace [PR sim/29869]
+ These headers define the register numbers for each port to implement
+ the sim_fetch_register & sim_store_register interfaces. While gdb
+ uses these, the APIs are part of the sim, not gdb. Move the headers
+ out of the gdb/ include namespace and into sim/ instead.
+
+ sim: ppc: drop old dgen.c generator
+ The spreg.[ch] files live in the source tree now and are created
+ with the dgen.py script, so we don't need this old tool anymore.
+
+2022-12-21 Mike Frysinger <vapier@gentoo.org>
+
+ sim: ppc: move spreg.[ch] files to the source tree
+ Simplify the build by moving the generation of these files from
+ build-time (via dgen.c that we have to compile & execute on the
+ build system) to maintainer/release mode (via spreg-gen.py that
+ we only ever execute when the spreg table actually changes). It
+ speeds up the build process and makes it easier for us to reason
+ about & review changes to the code generator.
+
+ The tool is renamed from "dgen" because it's hardcoded to only
+ generated spreg files. It isn't a generalized tool for creating
+ lookup tables.
+
+2022-12-21 GDB Administrator <gdbadmin@sourceware.org>
+
+ Automatic date update in version.in
+
+2022-12-20 Hannes Domani <ssbssa@yahoo.de>
+
+ Fix install-strip target
+ The libtool patch broke install-strip of gdb:
+
+ /bin/sh ../../gdb/../mkinstalldirs /src/gdb/inst/share/gdb/python/gdb
+ transformed_name=`t='s,y,y,'; \
+ echo gdb | sed -e "$t"` ; \
+ if test "x$transformed_name" = x; then \
+ transformed_name=gdb ; \
+ else \
+ true ; \
+ fi ; \
+ /bin/sh ../../gdb/../mkinstalldirs /src/gdb/inst/bin ; \
+ /bin/sh ./libtool --mode=install STRIPPROG='strip' /bin/sh /src/gdb/gdb.git/install-sh -c -s \
+ gdb \
+ /src/gdb/inst/bin/$transformed_name ; \
+ /bin/sh ../../gdb/../mkinstalldirs /src/gdb/inst/include/gdb ; \
+ /usr/bin/install -c -m 644 jit-reader.h /src/gdb/inst/include/gdb/jit-reader.h
+ libtool: install: `/src/gdb/inst/bin/gdb' is not a directory
+ libtool: install: Try `libtool --help --mode=install' for more information.
+
+ Since INSTALL_PROGRAM_ENV is no longer at the beginning of the command, the
+ gdb executable is not installed with install-strip.
+
+2022-12-20 Torbjörn SVENSSON <torbjorn.svensson@foss.st.com>
+
+ bfd: Discard symbol regardless of warning flag
+ The discard of symbols should be performed whether the warning for
+ the discard is enabled or not.
+ Without this patch, ld would segfault in bfd_section_removed_from_list,
+ called in the if-statement right after this block, as the argument
+ isec->output_section can be NULL.
+
+ Co-Authored-By: Yvan ROUX <yvan.roux@foss.st.com>
+
+2022-12-20 Alan Modra <amodra@gmail.com>
+
+ PR29915, bfdio.c does not compile with mingw.org's MinGW
+ PR 29915
+ * configure.ac: Add AC_CHECK_DECLS test ___lc_codepage_func.
+ * configure: Regenerate.
+ * config.in: Regenerate.
+ * bfdio.c (___lc_codepage_func): Move declaration to..
+ (_bfd_real_fopen): ..here, and use !HAVE_DECL____LC_CODEPAGE_FUNC.
+
+ Re: x86: remove i386-opc.c
+ Regen opcodes/po/POTFILES.in
+
+2022-12-20 Mike Frysinger <vapier@gentoo.org>
+
+ sim: ppc: change spreg switch table generation to compile-time
+ Simplify the generator by always outputting the switch tables, and
+ leave the choice of whether to use them to the compiler via a -D
+ flag.
+
+2022-12-20 Mike Frysinger <vapier@gentoo.org>
+
+ sim: dv-core: add hw_detach_address method [PR sim/25211]
+ The core device has an attach address method as the root of the tree
+ which calls out to the sim API. But it doesn't have a corresponding
+ detach method which means we just crash if anything tries to detach
+ itself from the core. In practice, the m68hc11 is the only model
+ that actually tries to detach itself on the fly, so no one noticed
+ earlier.
+
+ With this in place, we can delete the existing detach code from the
+ m68hc11 model since it defaults to "passthru" callback which will in
+ turn call the dv-core detach, and they have the same behavior -- call
+ the sim core API to detach from the address space.
+
+ Bug: https://sourceware.org/PR25211
+
+2022-12-20 Vladimir Mezentsev <vladimir.mezentsev@oracle.com>
+
+ gprofng: PR29646 Various warnings
+ gprofng/ChangeLog
+ 2022-12-19 Vladimir Mezentsev <vladimir.mezentsev@oracle.com>
+
+ PR gprofng/29646
+ * common/core_pcbe.c: Fix missingReturn warning.
+ * libcollector/iolib.c: Fix -Waddress warnings.
+ * src/Settings.cc: Likewise.
+ * src/checks.cc: Likewise.
+ * libcollector/linetrace.c: Likewise.
+ * libcollector/iotrace.c: Fix va_end_missing error.
+ * libcollector/libcol_util.c: Fix uninitvar warning.
+ * src/Command.cc: Fix arrayIndexOutOfBounds error.
+ * src/Function.cc: Fix uninitStructMember warning.
+ * src/ipc.cc: Fix -Wwrite-strings warnings.
+
+2022-12-20 GDB Administrator <gdbadmin@sourceware.org>
+
+ Automatic date update in version.in
+
+2022-12-19 Tom Tromey <tromey@adacore.com>
+
+ Avoid compiler warning in dwarf-do-refresh
+ The Emacs 28 compiler warns about dwarf-mode.el:
+
+ Warning (comp): dwarf-mode.el:180:32: Warning: Unused lexical argument `ignore'
+
+ This is easily fixed by prepending "_" to the parameter's name.
+
+ binutils/ChangeLog
+ 2022-12-19 Tom Tromey <tromey@adacore.com>
+
+ * dwarf-mode.el (dwarf-do-refresh): Avoid compiler warning.
+
+2022-12-19 Tom Tromey <tom@tromey.com>
+
+ Use bool in bpstat
+ This changes bpstat to use 'bool' rather than 'char', and updates the
+ uses.
+
+ Use bool constants for value_print_options
+ This changes the uses of value_print_options to use 'true' and 'false'
+ rather than integers.
+
+ Remove quick_symbol_functions::relocated
+ quick_symbol_functions::relocated is only needed for psymtabs, and
+ there it is only needed for Rust. However, because we've switched the
+ DWARF reader away from psymtabs, this means there's no longer a need
+ for this method at all.
+
+2022-12-19 Tom Tromey <tom@tromey.com>
+
+ Remove MI version 1
+ MI version 1 is long since obsolete. Several years ago, I filed
+ PR mi/23170 for this. I think it's finally time to remove this.
+ Any users of MI 1 can and should upgrade to a newer version.
+
+ Bug: https://sourceware.org/bugzilla/show_bug.cgi?id=23170
+
+2022-12-19 Tom Tromey <tom@tromey.com>
+
+ Remove vestiges of MI version 0
+ I found a few vestiges of MI version 0 in the test suite. This patch
+ removes them.
+
+2022-12-19 Alan Modra <amodra@gmail.com>
+
+ Tidy PR29893 and PR29908 fix
+ PR 29893
+ PR 29908
+ * dwarf.c (display_debug_addr): Combine dwarf5 unit_length checks.
+ Delete dead code.
+
+2022-12-19 Jan Vrany <jan.vrany@labware.com>
+
+ gdb: fix command lookup in execute_command ()
+ Commit b5661ff2 ("gdb: fix possible use-after-free when
+ executing commands") used lookup_cmd_exact () to lookup
+ command again after its execution to avoid possible
+ use-after-free error.
+
+ However this change broke test gdb.base/define.exp which
+ defines a post-hook for subcommand ("target testsuite").
+ In this case, lookup_cmd_exact () returned NULL because
+ there's no command 'testsuite' in top-level commands.
+
+ This commit fixes this case by looking up the command again
+ using the original command line via lookup_cmd ().
+
+ Approved-By: Simon Marchi <simon.marchi@efficios.com>
+
+2022-12-19 Nick Clifton <nickc@redhat.com>
+
+ Fix potential illegal memory accesses when parsing corrupt DWARF data.
+ PR 29914
+ * dwarf.c (fetch_indexed_value): Fail if the section is not big
+ enough to contain a header size field.
+ (display_debug_addr): Fail if the computed address size is too big
+ or too small.
+
+ New Romainian translation for the GOLD subdirectory.
+
+2022-12-19 Jan Beulich <jbeulich@suse.com>
+
+ gprofng/testsuite: skip Java test without JDK
+ There's no point in even trying the Java test when gprofng was built
+ without Java support, and when the building of the constituents of the
+ testcase also would fail. On such systems this converts the respective
+ tests from "unresolved" to "unsupported", making the overall testsuite
+ run no longer report failure just because of this.
+
+ gprofng/testsuite: eliminate bogus casts
+ Casting pointers to unsigned int is generally problematic and hence
+ compilers tend to warn about such. While here they're used only in
+ fprintf(), it still seems better to omit such casts, even if only to
+ avoid setting bad precedents.
+
+ gprofng/testsuite: correct line continuation in endcases.c
+ A backslash used to indicate line continuation (in a macro definition
+ here) is not supposed to be followed by blanks or other white space; the
+ end-of-line indicator is to follow immediately.
+
+ gprofng/testsuite: correct names for signal handling tests
+ The signal handling tests spend most of their time in the signal
+ handlers, and hence for profile output to match anything in program
+ output, the respective name fields need to hold the handler function
+ names. This converts both respective tests from "unresolved" to actually
+ succeeding.
+
+ gprofng/testsuite: adjust linking of synprog
+ In order for so_syn.so and so_syx.so to be able to access the main
+ program's "testtime" variable, that variable needs exposing in the
+ dynamic symbol table. Since this is a test program only, do it the brute
+ force way and simply expose all global symbols.
+
+ Arm: break gas dependency on libopcodes
+ gas doesn't use anything from libopcodes (anymore?) - suppress linking
+ in that library.
+
+ x86: omit Cpu prefixes from opcode table
+ These enumerators can be used in only one specific field, and hence the
+ Cpu prefix isn't needed ther for disambiguation / name space separation.
+
+2022-12-19 GDB Administrator <gdbadmin@sourceware.org>
+
+ Automatic date update in version.in
+
+2022-12-18 Alan Modra <amodra@gmail.com>
+
+ Comment bfd_get_section_limit_octets and bfd_get_section_alloc_size
+ * bfd.c (bfd_get_section_limit_octets): Add comment.
+ (bfd_get_section_alloc_size): Likewise.
+ * libbfd.c (_bfd_generic_get_section_contents): Use
+ bfd_get_section_limit_octets.
+ * section.c (bfd_get_section_contents): Likewise.
+ * bfd-in2.h: Regenerate.
+
+2022-12-18 Alan Modra <amodra@gmail.com>
+
+ ld bootstrap test in build dir with path containing symlinks
+ This allows the bootstrap test to run if you have a symlink somewhere
+ in the build path directory. $ld depends on $base_dir which is set
+ via tcl [pwd], collapsing the symlink like /usr/bin/pwd, while $objdir
+ contains the symlink.
+
+ * testsuite/ld-bootstrap/bootstrap.exp: Normalize paths when
+ checking for ld build directory.
+
+2022-12-18 Joel Brobecker <brobecker@adacore.com>
+
+ Update gdb/NEWS after GDB 13 branch creation.
+ This commit a new section for the next release branch, and renames
+ the section of the current branch, now that it has been cut.
+
+2022-12-18 Joel Brobecker <brobecker@adacore.com>
+
+ Bump version to 14.0.50.DATE-git.
+ Now that the GDB 13 branch has been created,
+ this commit bumps the version number in gdb/version.in to
+ 14.0.50.DATE-git
+
+ For the record, the GDB 13 branch was created
+ from commit 71c90666e601c511a5f495827ca9ba545e4cb463.
+
+ Also, as a result of the version bump, the following changes
+ have been made in gdb/testsuite:
+
+ * gdb.base/default.exp: Change $_gdb_major to 14.
+
+2022-12-18 GDB Administrator <gdbadmin@sourceware.org>
+
+ Automatic date update in version.in
+
+2022-12-17 Alan Modra <amodra@gmail.com>
+
+ bfd_get_relocated_section_contents allow NULL data buffer
+ This patch removes the bfd_malloc in default_indirect_link_order and
+ bfd_simple_get_relocated_section_contents, pushing the allocation down
+ to bfd_get_relocated_section_contents. The idea is to make use of the
+ allocation done with sanity checking in bfd_get_full_section_contents,
+ which is called by bfd_generic_get_relocated_section_contents.
+
+ Doing this exposed a bug in bfd_get_full_section_contents. With
+ relaxation it is possible that an input section rawsize is different
+ to the section size. In that case we want to use the larger of
+ rawsize (the on-disk size for input sections) and size.
+
+ * reloc.c (bfd_generic_get_relocated_section_contents),
+ * reloc16.c (bfd_coff_reloc16_get_relocated_section_contents),
+ * coff-alpha.c (alpha_ecoff_get_relocated_section_contents),
+ * coff-sh.c (sh_coff_get_relocated_section_contents),
+ * elf-m10200.c (mn10200_elf_get_relocated_section_contents),
+ * elf-m10300.c (mn10300_elf_get_relocated_section_contents),
+ * elf32-avr.c (elf32_avr_get_relocated_section_contents),
+ * elf32-cr16.c (elf32_cr16_get_relocated_section_contents),
+ * elf32-crx.c (elf32_crx_get_relocated_section_contents),
+ * elf32-h8300.c (elf32_h8_get_relocated_section_contents),
+ * elf32-nds32.c (nds32_elf_get_relocated_section_contents),
+ * elf32-sh.c (sh_elf_get_relocated_section_contents),
+ * elfxx-mips.c (_bfd_elf_mips_get_relocated_section_contents):
+ Handle NULL data buffer.
+ * bfd.c (bfd_get_section_alloc_size): New function.
+ * bfd-in2.h: Regenerate.
+ * compress.c (bfd_get_full_section_contents): Correct section
+ malloc size.
+ * linker.c (default_indirect_link_order): Don't malloc memory
+ here before calling bfd_get_relocated_section_contents.
+ * simple.c (bfd_simple_get_relocated_section_contents): Likewise.
+
+2022-12-17 Alan Modra <amodra@gmail.com>
+
+ asan: elf.c:12621:18: applying zero offset to null pointer
+ That's this line in elf_parse_notes:
+ while (p < buf + size)
+
+ * elf.c (_bfd_elf_make_section_from_shdr): Don't call
+ elf_parse_notes when sh_size is zero.
+
+2022-12-17 Alan Modra <amodra@gmail.com>
+
+ Re: The problem with warning in elf_object_p
+ Commit 5aa0f10c424e added a per_xvec_warn array to provide support for
+ warnings from elf_object_p (and a later patch for warnings from
+ pe_bfd_object_p) to be cached and then only printed if the target
+ matches. It was quite limited in the style of message supported, only
+ one message could be printed, and didn't really meet the stated aim of
+ only warning when a target matches: There are many other errors and
+ warnings that can be emitted by functions called from elf_object_p.
+
+ So this patch extends the error handler functions to support printing
+ to a string buffer, extends per_xvec_warn to support multiple errors/
+ warnings, and hooks this all into bfd_check_format_matches. If
+ bfd_check_format_matches succeeds then any errors/warnings are printed
+ for the matching target. If bfd_check_format_matches fails either due
+ to no match or to multiple matches and only one target vector produced
+ errors, then those errors are printed.
+
+ * bfd.c (MAX_ARGS): Define, use throughout.
+ (print_func): New typedef.
+ (_bfd_doprnt): Add new print param. Replace calls to fprintf
+ with print.
+ (PRINT_TYPE): Similarly.
+ (error_handler_fprintf): Renamed from error_handler_internal.
+ Use _bfd_get_error_program_name. Add fprintf arg. Move code
+ setting up args..
+ (_bfd_doprnt_scan): ..to here. Add ap param.
+ (struct buf_stream): New.
+ (err_sprintf): New function.
+ (error_handler_bfd): New static variable.
+ (error_handler_sprintf): New function.
+ (_bfd_set_error_handler_caching): New function.
+ (_bfd_get_error_program_name): New function.
+ * elfcode.h (elf_swap_shdr_in): Use _bfd_error_handler in
+ warning messages.
+ (elf_object_p): Likewise.
+ * format.c (print_warnmsg): New function.
+ (clear_warnmsg): Rewrite.
+ (null_error_handler): New function.
+ (bfd_check_format_matches): Ignore warnings from recursive calls
+ checking first element of an archive. Use caching error handler
+ otherwise. Print warnings on successful match, or when only one
+ target has emitted warnings/errors.
+ * peicode.h (pe_bfd_object_p): Use _bfd_error_handler in
+ warning messages.
+ * targets.c (per_xvec_warn): Change type of array elements.
+ (struct per_xvec_message): New.
+ (_bfd_per_xvec_warn): Rewrite.
+ * Makefile.am (LIBBFD_H_FILES): Add bfd.c.
+ * Makefile.in: Regenerate.
+ * bfd-in2.h: Regenerate.
+ * libbfd.h: Regenerate.
+
+2022-12-17 Indu Bhagat <indu.bhagat@oracle.com>
+
+ sframe: doc: update spec for the mangled-RA bit in FRE
+ ChangeLog:
+
+ * libsframe/doc/sframe-spec.texi
+
+2022-12-17 Indu Bhagat <indu.bhagat@oracle.com>
+
+ gas: sframe: testsuite: add testcase for .cfi_negate_ra_state
+ Add a new test to check that .cfi_negate_ra_state on aarch64 is handled
+ well (a non-empty SFrame section with valid SFrame FREs is generated).
+
+ ChangeLog:
+
+ * testsuite/gas/cfi-sframe/cfi-sframe-aarch64-2.d: New test.
+ * testsuite/gas/cfi-sframe/cfi-sframe-aarch64-2.s: Likewise.
+ * testsuite/gas/cfi-sframe/cfi-sframe.exp: Adjust the list
+ accordingly.
+
+2022-12-17 Indu Bhagat <indu.bhagat@oracle.com>
+
+ objdump/readelf: sframe: emit marker for FREs with mangled RA
+ In the textual dump of the SFrame section, when an SFrame FRE recovers a
+ mangled RA, use string "[s]" in the output to indicate that the return
+ address is a signed (mangled) one.
+
+ ChangeLog:
+
+ * libsframe/sframe-dump.c (dump_sframe_func_with_fres): Postfix
+ with "[s]" if RA is signed with authorization code.
+
+2022-12-17 Indu Bhagat <indu.bhagat@oracle.com>
+
+ libsframe: provide new access API for mangled RA bit
+ include/ChangeLog:
+
+ * sframe-api.h (sframe_fre_get_ra_mangled_p): New declaration.
+
+ ChangeLog:
+
+ * libsframe/sframe.c (sframe_get_fre_ra_mangled_p): New
+ definition.
+ (sframe_fre_get_ra_mangled_p): New static function.
+
+2022-12-17 Indu Bhagat <indu.bhagat@oracle.com>
+
+ gas: sframe: add support for .cfi_negate_ra_state
+ DW_CFA_AARCH64_negate_ra_state in aarch64 is multiplexed with
+ DW_CFA_GNU_window_save in the DWARF format.
+
+ Remove the common-empty-4 testcase because the generated SFrame section
+ will not be be empty anymore. A relevant test will be added in a later
+ commit.
+
+ ChangeLog:
+
+ * gas/gen-sframe.c (sframe_v1_set_fre_info): Add new argument
+ for mangled_ra_p.
+ (sframe_set_fre_info): Likewise.
+ (output_sframe_row_entry): Handle mangled_ra_p.
+ (sframe_row_entry_new): Reset mangled_ra_p.
+ (sframe_row_entry_initialize): Initialize mangled_ra_p.
+ (sframe_xlate_do_gnu_window_save): New definition.
+ (sframe_do_cfi_insn): Handle DW_CFA_GNU_window_save.
+ * gas/gen-sframe.h (struct sframe_row_entry): New member.
+ (struct sframe_version_ops): Add a new argument for
+ mangled_ra_p.
+ * gas/testsuite/gas/cfi-sframe/cfi-sframe.exp: Remove test.
+ * gas/testsuite/gas/cfi-sframe/common-empty-4.d: Removed.
+ * gas/testsuite/gas/cfi-sframe/common-empty-4.s: Removed.
+
+2022-12-17 Indu Bhagat <indu.bhagat@oracle.com>
+
+ sframe.h: add support for .cfi_negate_ra_state
+ Use the last remaining bit in the 'SFrame FRE info' word to store whether
+ the RA is signed/unsigned with PAC authorization code: this bit is named
+ as the "mangled RA" bit. This bit is still unused for x86-64.
+
+ The behaviour of the mangled-RA info bit in SFrame format closely
+ follows the behaviour of DW_CFA_AARCH64_negate_ra_state in DWARF. During
+ unwinding, whenever an SFrame FRE with non-zero "mangled RA" bit is
+ encountered, it means the upper bits of the return address contain Pointer
+ Authentication code. The unwinder, hence, must use appropriate means to
+ restore LR correctly in such cases.
+
+ include/ChangeLog:
+
+ * sframe.h (SFRAME_V1_FRE_INFO_UPDATE_MANGLED_RA_P): New macro.
+ (SFRAME_V1_FRE_MANGLED_RA_P): Likewise.
+
+2022-12-17 GDB Administrator <gdbadmin@sourceware.org>
+
+ Automatic date update in version.in
+
+2022-12-16 Pedro Alves <pedro@palves.net>
+
+ Delay checking whether /proc/pid/mem is writable (PR gdb/29907)
+ As of 1bcb0708f229 ("gdb/linux-nat: Check whether /proc/pid/mem is
+ writable"), GDB checks if /proc/pid/mem is writable. This is done
+ early at GDB startup, in order to get a consistent warning, instead of
+ a warning that depends on whenever GDB writes to inferior memory.
+
+ PR gdb/29907 points out that some build systems (like QEMU's,
+ apparently) may call 'gdb --version' to check GDB's presence & its
+ version on the system, and that Gentoo's build process has sandboxing
+ which blocks the /proc/pid/mem access and thus GDB warns, which
+ results in build fails.
+
+ To help with that, this patch delays the /proc/pid/mem check until we
+ start or attach to an inferior. Ends up potentially emiting a warning
+ close where we already emit other ptrace- and /proc- related warnings,
+ which just Feels Right.
+
+ Bug: https://sourceware.org/bugzilla/show_bug.cgi?id=29907
+ Change-Id: I5537653ecfbbe76a04ab035e40e59d09b4980763
+
+2022-12-16 Nick Clifton <nickc@redhat.com>
+
+ Fix previous delta to allow for compilation on 32-bit systems
+
+2022-12-16 Tom de Vries <tdevries@suse.de>
+
+ [gdb/testsuite] Fix race in gdb.threads/detach-step-over.exp
+ Once in a while I run into:
+ ...
+ FAIL: gdb.threads/detach-step-over.exp: \
+ breakpoint-condition-evaluation=host: target-non-stop=off: non-stop=off: \
+ displaced=off: iter 1: all threads running
+ ...
+
+ In can easily reproduce this by doing:
+ ...
+ # Wait a bit, to give time for the threads to hit the
+ # breakpoint.
+ - sleep 1
+
+ return true
+ ...
+
+ Fix this by counting the running threads in a loop, effectively allowing 10
+ seconds (instead of 1) for the threads to start running, but only sleeping if
+ needed.
+
+ Reduces total execution time from 1m27s to 56s.
+
+ Tested on x86_64-linux.
+
+2022-12-16 Andrew Burgess <aburgess@redhat.com>
+
+ gdb: fix crash when getting the value of a label symbol
+ When the source program contains a goto label, it turns out it's
+ actually pretty hard for a user to find out more about that label.
+ For example:
+
+ (gdb) p some_label
+ No symbol "some_label" in current context.
+ (gdb) disassemble some_label
+ No symbol "some_label" in current context.
+ (gdb) x/10i some_label
+ No symbol "some_label" in current context.
+ (gdb) break some_label
+ Breakpoint 2 at 0x401135: file /tmp/py-label-symbol-value.c, line 35.
+
+ In all cases, some_label is a goto label within the current frame.
+ Only placing a breakpoint on the label worked.
+
+ This all seems a little strange to me, it feels like asking about a
+ goto label would not be an unreasonable thing for a user to do.
+
+ This commit doesn't fix any of the above issues, I mention them just
+ to provide a little context for why the following issue has probably
+ not been seen before.
+
+ It turns out there is one way a user can access the symbol for a goto
+ label, through the Python API:
+
+ python frame = gdb.selected_frame()
+ python frame_pc = frame.pc()
+ python block = gdb.current_progspace().block_for_pc(frame_pc)
+ python symbol,_ = gdb.lookup_symbol('some_label', block, gdb.SYMBOL_LABEL_DOMAIN)
+ python print(str(symbol.value()))
+ ../../src/gdb/findvar.c:204: internal-error: store_typed_address: Assertion `type->is_pointer_or_reference ()' failed.
+
+ The problem is that label symbols are created using the
+ builtin_core_addr type, which is a pure integer type.
+
+ When GDB tries to fetch the value of a label symbol then we end up in
+ findvar.c, in the function language_defn::read_var_value, in the
+ LOC_LABEL case. From here store_typed_address is called to store the
+ address of the label into a value object with builtin_core_addr type.
+
+ The problem is that store_typed_address requires that the destination
+ type be a pointer or reference, which the builtin_core_addr type is
+ not.
+
+ Now it's not clear what type a goto label address should have, but
+ GCC has an extension that allows users to take the address of a goto
+ label (using &&), in that case the result is of type 'void *'.
+
+ I propose that when we convert the CORE_ADDR value to a GDB value
+ object, we use builtin_func_ptr type instead of builtin_core_addr,
+ this means the result will be of type 'void (*) ()'. The benefit of
+ this approach is that when gdbarch_address_to_pointer is called the
+ target type will be correctly identified as a pointer to code, which
+ should mean any architecture specific adjustments are done correctly.
+
+ We can then cast the new value to 'void *' type with a call to
+ value_cast_pointer, this should not change the values bit
+ representation, but will just update the type.
+
+ After this asking for the value of a label symbol works just fine:
+
+ (gdb) python print(str(symbol.value()))
+ 0x401135 <main+35>
+
+ And the type is maybe what we'd expect:
+
+ (gdb) python print(str(symbol.value().type))
+ void *
+
+2022-12-16 Simon Marchi <simon.marchi@polymtl.ca>
+
+ gdb: convert linux-osdata.c from buffer to std::string
+ Replace the use of struct buffer in linux-osdata.c with std::string.
+ There is no change in the logic, so there should be no user-visible
+ change.
+
+ Change-Id: I27f53165d401650bbd0bebe8ed88221e25545b3f
+ Approved-By: Pedro Alves <pedro@palves.net>
+
+2022-12-16 Simon Marchi <simon.marchi@polymtl.ca>
+
+ gdbsupport: add string_xml_appendf
+ Add a version of buffer_xml_printf (defined in gdbsupport/buffer.{c,h})
+ that appends to an std::string, rather than a struct buffer. Call it
+ "string" rather than "buffer" since it operates on an std::string rather
+ than a buffer. And call it "appendf" rather than "printf", since it
+ appends to and does not replace the string's content. This mirrors
+ string_appendf.
+
+ Place the new version in gdbsupport/xml-utils.h.
+
+ The code is a direct copy of buffer_xml_printf. The old version is
+ going to disappear at some point, which is why I didn't do any effort to
+ share code.
+
+ Change-Id: I30e030627ab4970fd0b9eba3b7e8cec78fa561ba
+ Approved-By: Pedro Alves <pedro@palves.net>
+
+2022-12-16 Andrew Burgess <aburgess@redhat.com>
+
+ gdb: clean up some inefficient std::string usage
+ This commit:
+
+ commit 53cf95c3389a3ecd97276d322e4a60fe3396a201
+ Date: Wed Dec 14 14:17:44 2022 +0000
+
+ gdb: make more use of make_target_connection_string
+
+ Introduced a couple of inefficient uses of std::string, both of which
+ are fixed in this commit.
+
+ There should be no user visible changes after this commit.
+
+ Approved-By: Simon Marchi <simon.marchi@efficios.com>
+
+2022-12-16 Nick Clifton <nickc@redhat.com>
+
+ Fix a potential illegal memory access when parsing corrupt DWARF information.
+ PR 29908
+ * dwarf.c (display_debug_addr): Check for corrupt header lengths.
+
+2022-12-16 Jan Vrany <jan.vrany@labware.com>
+
+ gdb/testsuite: add test for Python commands redefining itself
+ This commit adds a test that creates a Python command that redefines
+ itself during its execution. This is to test use-after-free in
+ execute_command ().
+
+ This test needs run with ASan enabled in order to fail when it
+ should.
+
+ Approved-By: Simon Marchi <simon.marchi@efficios.com>
+
+2022-12-16 Luis Machado <luis.machado@arm.com>
+
+ [aarch64] Fix removal of non-address bits for PAuth
+ PR gdb/28947
+
+ The address_significant gdbarch setting was introduced as a way to remove
+ non-address bits from pointers, and it is specified by a constant. This
+ constant represents the number of address bits in a pointer.
+
+ Right now AArch64 is the only architecture that uses it, and 56 was a
+ correct option so far.
+
+ But if we are using Pointer Authentication (PAuth), we might use up to 2 bytes
+ from the address space to store the required information. We could also have
+ cases where we're using both PAuth and MTE.
+
+ We could adjust the constant to 48 to cover those cases, but this doesn't
+ cover the case where GDB needs to sign-extend kernel addresses after removal
+ of the non-address bits.
+
+ This has worked so far because bit 55 is used to select between kernel-space
+ and user-space addresses. But trying to clear a range of bits crossing the
+ bit 55 boundary requires the hook to be smarter.
+
+ The following patch renames the gdbarch hook from significant_addr_bit to
+ remove_non_address_bits and passes a pointer as opposed to the number of
+ bits. The hook is now responsible for removing the required non-address bits
+ and sign-extending the address if needed.
+
+ While at it, make GDB and GDBServer share some more code for aarch64 and add a
+ new arch-specific testcase gdb.arch/aarch64-non-address-bits.exp.
+
+ Bug-url: https://sourceware.org/bugzilla/show_bug.cgi?id=28947
+
+ Approved-By: Simon Marchi <simon.marchi@efficios.com>
+
+2022-12-16 Jan Beulich <jbeulich@suse.com>
+
+ gas: restore Dwarf info generation after macro diagnostic adjustments
+ While 6fdb723799e2 ("gas: re-work line number tracking for macros and
+ their expansions") was meant to leave generated Dwarf as is, it really
+ didn't (and the testcase intended to catch that wasn't covering the case
+ which broke). Its adjustment to buffer_and_nest() didn't go far enough,
+ leading to the "linefile" directive inserted at the top to also be
+ processed later in the PR gas/16908 workaround (which clearly isn't
+ intended - it's being put there for processing during macro expansion
+ only). That unnoticed flaw in turn led me to work around it by a
+ (suspicious to me already at the time) conditional in as_where().
+
+ x86: change representation of extension opcode
+ Having a "None" field in the vast majority of entries is needlessly
+ cluttering the overall table. Instead of this being a separate field,
+ use a representation matching that of Intel SDM and AMD PM for the main
+ use of the field: Append the value after a / as the separator.
+
+2022-12-16 Simon Marchi <simon.marchi@polymtl.ca>
+
+ gdbsupport: change xml_escape_text_append's parameter from pointer to reference
+ The passed in string can't be nullptr, it makes more sense to pass in a
+ reference.
+
+ Change-Id: Idc8bd38abe1d6d9b44aa227d7856956848c233b3
+
+2022-12-16 Simon Marchi <simon.marchi@polymtl.ca>
+
+ gdb: remove static buffer in command_line_input
+ [I sent this earlier today, but I don't see it in the archives.
+ Resending it through a different computer / SMTP.]
+
+ The use of the static buffer in command_line_input is becoming
+ problematic, as explained here [1]. In short, with this patch [2] that
+ attempt to fix a post-hook bug, when running gdb.base/commands.exp, we
+ hit a case where we read a "define" command line from a script file
+ using command_command_line_input. The command line is stored in
+ command_line_input's static buffer. Inside the define command's
+ execution, we read the lines inside the define using command_line_input,
+ which overwrites the define command, in command_line_input's static
+ buffer. After the execution of the define command, execute_command does
+ a command look up to see if a post-hook is registered. For that, it
+ uses a now stale pointer that used to point to the define command, in
+ the static buffer, causing a use-after-free. Note that the pointer in
+ execute_command points to the dynamically-allocated buffer help by the
+ static buffer in command_line_input, not to the static object itself,
+ hence why we see a use-after-free.
+
+ Fix that by removing the static buffer. I initially changed
+ command_line_input and other related functions to return an std::string,
+ which is the obvious but naive solution. The thing is that some callees
+ don't need to return an allocated string, so this this an unnecessary
+ pessimization. I changed it to passing in a reference to an std::string
+ buffer, which the callee can use if it needs to return
+ dynamically-allocated content. It fills the buffer and returns a
+ pointers to the C string inside. The callees that don't need to return
+ dynamically-allocated content simply don't use it.
+
+ So, it started with modifying command_line_input as described above, all
+ the other changes derive directly from that.
+
+ One slightly shady thing is in handle_line_of_input, where we now pass a
+ pointer to an std::string's internal buffer to readline's history_value
+ function, which takes a `char *`. I'm pretty sure that this function
+ does not modify the input string, because I was able to change it (with
+ enough massaging) to take a `const char *`.
+
+ A subtle change is that we now clear a UI's line buffer using a
+ SCOPE_EXIT in command_line_handler, after executing the command.
+ This was previously done by this line in handle_line_of_input:
+
+ /* We have a complete command line now. Prepare for the next
+ command, but leave ownership of memory to the buffer . */
+ cmd_line_buffer->used_size = 0;
+
+ I think the new way is clearer.
+
+ [1] https://inbox.sourceware.org/gdb-patches/becb8438-81ef-8ad8-cc42-fcbfaea8cddd@simark.ca/
+ [2] https://inbox.sourceware.org/gdb-patches/20221213112241.621889-1-jan.vrany@labware.com/
+
+ Change-Id: I8fc89b1c69870c7fc7ad9c1705724bd493596300
+ Reviewed-By: Tom Tromey <tom@tromey.com>
+
+2022-12-16 GDB Administrator <gdbadmin@sourceware.org>
+
+ Automatic date update in version.in
+
+2022-12-15 Indu Bhagat <indu.bhagat@oracle.com>
+
+ libsframe asan: avoid generating misaligned loads
+ There are two places where unaligned loads were seen on aarch64:
+ - #1. access to the SFrame FRE stack offsets in the in-memory
+ representation/abstraction provided by libsframe.
+ - #2. access to the SFrame FRE start address in the on-disk representation
+ of the frame row entry.
+
+ For #1, we can fix this by reordering the struct members of
+ sframe_frame_row_entry in libsframe/sframe-api.h.
+
+ For #2, we need to default to using memcpy instead, and copy out the bytes
+ to a location for output.
+
+ SFrame format is an unaligned on-disk format. As such, there are other blobs
+ of memory in the on-disk SFrame FRE that are on not on their natural
+ boundaries. But that does not pose further problems yet, because the users
+ are provided access to the on-disk SFrame FRE data via libsframe's
+ sframe_frame_row_entry, the latter has its' struct members aligned on their
+ respective natural boundaries (and initialized using memcpy).
+
+ PR 29856 libsframe asan: load misaligned at sframe.c:516
+
+ ChangeLog:
+
+ PR libsframe/29856
+ * bfd/elf64-x86-64.c: Adjust as the struct members have been
+ reordered.
+ * libsframe/sframe.c (sframe_decode_fre_start_address): Use
+ memcpy to perform 16-bit/32-bit reads.
+ * libsframe/testsuite/libsframe.encode/encode-1.c: Adjust as the
+ struct members have been reordered.
+
+ include/ChangeLog:
+
+ PR libsframe/29856
+ * sframe-api.h: Reorder fre_offsets for natural alignment.
+
+2022-12-15 Simon Marchi <simon.marchi@polymtl.ca>
+
+ gdb/testsuite: don't delete command files in gdb.base/commands.exp
+ Don't delete the runtime-generated command files. This makes it easier
+ to reproduce tests by hand.
+
+ Change-Id: I4e53484eea216512f1c5d7dfcb5c464b36950946
+ Approved-By: Tom Tromey <tom@tromey.com>
+
+2022-12-15 Tom Tromey <tromey@adacore.com>
+
+ Move streq and compare_cstrings to gdbsupport
+ It seems to me that streq and compare_cstrings belong near the other
+ string utility functions in common-utils.h; and furthermore that streq
+ ought to be inlined. This patch makes this change.
+
+ Approved-By: Simon Marchi <simon.marchi@efficios.com>
+
+2022-12-15 Tom Tromey <tromey@adacore.com>
+
+ Remove subset_compare
+ I stumbled across subset_compare today, and after looking at the
+ callers I realized it could be removed and replaced with calls to
+ startswith.
+
+ Approved-By: Simon Marchi <simon.marchi@efficios.com>
+
+2022-12-15 Andrew Burgess <aburgess@redhat.com>
+
+ gdb: use gdb_assert not internal_error
+ Spotted a couple of places in findvar.c where we use:
+
+ if ( ! CONDITION )
+ internal_error ("...");
+
+ this commit changes these to be:
+
+ gdb_assert ( CONDITION );
+
+ which I think is better.
+
+ Unless we happen to hit the internal_error calls (which was bad) there
+ should be no user visible changes after this commit.
+
+2022-12-15 Andrew Burgess <aburgess@redhat.com>
+
+ gdb: some int to bool conversion in remote-sim.c
+ Some obvious int to bool conversion in remote-sim.c, there should be
+ no user visible changes after this commit.
+
+2022-12-15 Andrew Burgess <aburgess@redhat.com>
+
+ gdb: make more use of make_target_connection_string
+ I noticed that we have a function make_target_connection_string which
+ wraps all the logic for creating a string that describes a target
+ connection - but in some places we are not calling this function,
+ instead we duplicate the function's logic.
+
+ This commit cleans this up, and calls make_target_connection_string
+ where possible.
+
+ There should be no user visible changes after this commit.
+
+2022-12-15 Andrew Burgess <aburgess@redhat.com>
+
+ gdb: int to bool conversion in tracefile.c
+ Some obvious int to bool conversion in tracefile.c.
+
+ Should be no user visible changes after this commit.
+
+2022-12-15 Tom de Vries <tdevries@suse.de>
+
+ [gdb/testsuite] Fix gdb.base/condbreak-multi-context.exp with gcc 4.8.5
+ With gcc 4.8.5, I run into:
+ ...
+ Running gdb.base/condbreak-multi-context.exp ...
+ gdb compile failed, condbreak-multi-context.cc:21:11: warning: non-static \
+ data member initializers only available with -std=c++11 or -std=gnu++11 \
+ [enabled by default]
+ int b = 20;
+ ^
+ ...
+
+ Fix this by making it a static const.
+
+ Tested on x86_64-linux, with gcc 4.8.5, 7.5.0 and clang 13.0.1.
+
+2022-12-15 GDB Administrator <gdbadmin@sourceware.org>
+
+ Automatic date update in version.in
+
+2022-12-14 Andrew Burgess <aburgess@redhat.com>
+
+ gdb/maint: add core file name to 'maint info program-spaces' output
+ Each program space can have an associated core file. Include this
+ information in the output of 'maint info program-spaces'.
+
+2022-12-14 Andrew Burgess <aburgess@redhat.com>
+
+ gdb: ensure all targets are popped before an inferior is destructed
+ Now that the inferiors target_stack automatically manages target
+ reference counts, we might think that we don't need to unpush targets
+ when an inferior is deleted...
+
+ ...unfortunately that is not the case. The inferior::unpush function
+ can do some work depending on the type of target, so it is important
+ that we still pass through this function.
+
+ To ensure that this is the case, in this commit I've added an assert
+ to inferior::~inferior that ensures the inferior's target_stack is
+ empty (except for the ever present dummy_target).
+
+ I've then added a pop_all_targets call to delete_inferior, otherwise
+ the new assert will fire in, e.g. the gdb.python/py-inferior.exp test.
+
+2022-12-14 Andrew Burgess <aburgess@redhat.com>
+
+ gdb: remove the pop_all_targets (and friends) global functions
+ This commit removes the global functions pop_all_targets,
+ pop_all_targets_above, and pop_all_targets_at_and_above, and makes
+ them methods on the inferior class.
+
+ As the pop_all_targets functions will unpush each target, which
+ decrements the targets reference count, it is possible that the target
+ might be closed.
+
+ Right now, closing a target, in some cases, depends on the current
+ inferior being set correctly, that is, to the inferior from which the
+ target was popped.
+
+ To facilitate this I have used switch_to_inferior_no_thread within the
+ new methods. Previously it was the responsibility of the caller to
+ ensure that the correct inferior was selected.
+
+ In a couple of places (event-top.c and top.c) I have been able to
+ remove a previous switch_to_inferior_no_thread call.
+
+ In remote_unpush_target (remote.c) I have left the
+ switch_to_inferior_no_thread call as it is required for the
+ generic_mourn_inferior call.
+
+2022-12-14 Andrew Burgess <aburgess@redhat.com>
+
+ gdb: remove decref_target
+ The decref_target function is not really needed. Calling
+ target_ops::decref will just redirect to decref_target anyway, so why
+ not just rename decref_target to target_ops::decref?
+
+ That's what this commit does.
+
+ It's not exactly renaming to target_ops::decref, because the decref
+ functionality is handled by a policy class, so the new name is now
+ target_ops_ref_policy::decref.
+
+ There should be no user visible change after this commit.
+
+2022-12-14 Andrew Burgess <aburgess@redhat.com>
+
+ gdb: have target_stack automate reference count handling
+ This commit changes the target_stack class from using a C style array
+ of 'target_ops *' to using a C++ std::array<target_ops_ref, ...>. The
+ benefit of this change is that some of the reference counting of
+ target_ops objects is now done automatically.
+
+ This commit fixes a crash in gdb.python/py-inferior.exp where GDB
+ crashes at exit, leaving a core file behind.
+
+ The crash occurs in connpy_connection_dealloc, and is actually
+ triggered by this assert:
+
+ gdb_assert (conn_obj->target == nullptr);
+
+ Now a little aside...
+
+ ... the assert is never actually printed, instead GDB crashes due
+ to calling a pure virtual function. The backtrace at the point of
+ crash looks like this:
+
+ #7 0x00007fef7e2cf747 in std::terminate() () from /lib64/libstdc++.so.6
+ #8 0x00007fef7e2d0515 in __cxa_pure_virtual () from /lib64/libstdc++.so.6
+ #9 0x0000000000de334d in target_stack::find_beneath (this=0x4934d78, t=0x2bda270 <the_dummy_target>) at ../../s>
+ #10 0x0000000000df4380 in inferior::find_target_beneath (this=0x4934b50, t=0x2bda270 <the_dummy_target>) at ../.>
+ #11 0x0000000000de2381 in target_ops::beneath (this=0x2bda270 <the_dummy_target>) at ../../src/gdb/target.c:3047
+ #12 0x0000000000de68aa in target_ops::supports_terminal_ours (this=0x2bda270 <the_dummy_target>) at ../../src/gd>
+ #13 0x0000000000dde6b9 in target_supports_terminal_ours () at ../../src/gdb/target.c:1112
+ #14 0x0000000000ee55f1 in internal_vproblem(internal_problem *, const char *, int, const char *, typedef __va_li>
+
+ Notice in frame #12 we called target_ops::supports_terminal_ours,
+ however, this is the_dummy_target, which is of type dummy_target,
+ and so we should have called dummy_target::supports_terminal_ours.
+ I believe the reason we ended up in the wrong implementation of
+ supports_terminal_ours (which is a virtual function) is because we
+ made the call during GDB's shut-down, and, I suspect, the vtables
+ were in a weird state.
+
+ Anyway, the point of this patch is not to fix GDB's ability to
+ print an assert during exit, but to address the root cause of the
+ assert. With that aside out of the way, we can return to the main
+ story...
+
+ Connections are represented in Python with gdb.TargetConnection
+ objects (or its sub-classes). The assert in question confirms that
+ when a gdb.TargetConnection is deallocated, the underlying GDB
+ connection has itself been removed from GDB. If this is not true then
+ we risk creating multiple different gdb.TargetConnection objects for
+ the same connection, which would be bad.
+
+ To ensure that we have one gdb.TargetConnection object for each
+ connection, the all_connection_objects map exists, this maps the
+ process_stratum_target object (the connection) to the
+ gdb.TargetConnection object that represents the connection.
+
+ When a connection is removed in GDB the connection_removed observer
+ fires, which we catch with connpy_connection_removed, this function
+ then sets conn_obj->target to nullptr, and removes the corresponding
+ entry from the all_connection_objects map.
+
+ The first issue here is that connpy_connection_dealloc is being called
+ as part of GDB's exit code, which is run after the Python interpreter
+ has been shut down. The connpy_connection_dealloc function is used to
+ deallocate the gdb.TargetConnection Python object. Surely it is
+ wrong for us to be deallocating Python objects after the interpreter
+ has been shut down.
+
+ The reason why connpy_connection_dealloc is called during GDB's exit
+ is that the global all_connection_objects map is still holding a
+ reference to the gdb.TargetConnection object. When the map is
+ destroyed during GDB's exit, the gdb.TargetConnection objects within
+ the map can finally be deallocated.
+
+ The reason why all_connection_objects has contents when GDB exits, and
+ the reason the assert fires, is that, when GDB exits, there are still
+ some connections that have not yet been removed from GDB, that is,
+ they have a non-zero reference count.
+
+ If we take a look at quit_force (top.c) you can see that, for each
+ inferior, we call pop_all_targets before we (later in the function)
+ call do_final_cleanups. It is the do_final_cleanups call that is
+ responsible for shutting down the Python interpreter. The
+ pop_all_targets calls should, in theory, cause all the connections to
+ be removed from GDB.
+
+ That this isn't working indicates that some targets have a non-zero
+ reference count even after this final pop_all_targets call, and
+ indeed, when I debug GDB, that is what I see.
+
+ I tracked the problem down to delete_inferior where we do some house
+ keeping, and then delete the inferior object, which calls
+ inferior::~inferior.
+
+ In neither delete_inferior or inferior::~inferior do we call
+ pop_all_targets, and it is this missing call that means we leak some
+ references to the target_ops objects on the inferior's target_stack.
+
+ In this commit I will provide a partial fix for the problem. I say
+ partial fix, but this will actually be enough to resolve the crash.
+ In a later commit I will provide the final part of the fix.
+
+ As mentioned at the start of the commit message, this commit changes
+ the m_stack in target_stack to hold target_ops_ref objects. This
+ means that when inferior::~inferior is called, and m_stack is
+ released, we automatically decrement the target_ops reference count.
+ With this change in place we no longer leak any references, and now,
+ in quit_force the final pop_all_targets calls will release the final
+ references. This means that the targets will be correctly closed at
+ this point, which means the connections will be removed from GDB and
+ the Python objects deallocated before the Python interpreter shuts
+ down.
+
+ There's a slight oddity in target_stack::unpush, where we std::move
+ the reference out of m_stack like this:
+
+ auto ref = std::move (m_stack[stratum]);
+
+ the `ref' isn't used explicitly, but it serves to hold the
+ target_ops_ref until the end of the scope while allowing the m_stack
+ entry to be reset back to nullptr. The alternative would be to
+ directly set the m_stack entry to nullptr, like this:
+
+ m_stack[stratum] = nullptr;
+
+ The problem here is that when we set the m_stack entry to nullptr we
+ first decrement the target_ops reference count, and then set the array
+ entry to nullptr.
+
+ If the decrement means that the target_ops object reaches a zero
+ reference count then the target_ops object will be closed by calling
+ target_close. In target_close we ensure that the target being closed
+ is not in any inferiors target_stack.
+
+ As we decrement before clearing, then this check in target_close will
+ fail, and an assert will trigger.
+
+ By using std::move to move the reference out of m_stack, this clears
+ the m_stack entry, meaning the inferior no longer contains the
+ target_ops in its target_stack. Now when the REF object goes out of
+ scope and the reference count is decremented, target_close can run
+ successfully.
+
+ I've made use of the Python connection_removed listener API to add a
+ test for this issue. The test installs a listener and then causes
+ delete_inferior to be called, we can then see that the connection is
+ then correctly removed (because the listener triggers).
+
+2022-12-14 Andrew Burgess <aburgess@redhat.com>
+
+ gdb/remote: remove some manual reference count handling
+ While working on some other target_ops reference count related code, I
+ spotted that in remote.c we do some manual reference count handling,
+ i.e. we call target_ops::incref and decref_target (which wraps
+ target_ops::decref).
+
+ I think it would be better to make use of gdb::ref_ptr to automate the
+ reference count management.
+
+ So, this commit updates scoped_mark_target_starting in two ways,
+ first, I use gdb::ref_ptr to handle the reference counts. Then,
+ instead of using the scoped_mark_target_starting constructor and
+ destructor to set and reset the starting_up flag, I now use a
+ scoped_restore_tmpl object to set and restore the flag.
+
+ The above changes mean that the scoped_mark_target_starting destructor
+ can be completely removed, and the constructor body is now empty.
+
+ I've also fixed a typo in the class comment.
+
+ The only change in behaviour after this commit is that previously we
+ didn't care what the value of starting_up was, we just set it to true
+ in the constructor and false in the destructor.
+
+ Now, I assert that the flag is initially false, then set the flag true
+ when the scoped_mark_target_starting is created.
+
+ As the starting_up flag is initialized to false then, for the assert
+ to fire, we would need to recursively enter
+ remote_target::start_remote_1, which I don't think is something we
+ should be doing, so I think the new assert is an improvement.
+
+2022-12-14 Alan Modra <amodra@gmail.com>
+
+ Re: ld, gold: remove support for -z bndplt (MPX prefix)
+ Don't attempt to run gold tests with -z bndplt
+
+ * testsuite/Makefile.am (exception_x86_64_bnd_test, bnd_plt_1.sh),
+ (bnd_ifunc_1.sh, bnd_ifunc_2.sh): Delete rules.
+ * testsuite/Makefile.in: Regenerate.
+ * testsuite/bnd_ifunc_1.s: Delete.
+ * testsuite/bnd_ifunc_1.sh: Delete.
+ * testsuite/bnd_ifunc_2.s: Delete.
+ * testsuite/bnd_ifunc_2.sh: Delete.
+ * testsuite/bnd_plt_1.s: Delete.
+ * testsuite/bnd_plt_1.sh: Delete.
+
+2022-12-14 Alan Modra <amodra@gmail.com>
+
+ asan: buffer overflow in sh_reloc
+ * coff-sh.c (sh_reloc): Use bfd_reloc_offset_in_range.
+
+2022-12-14 Alan Modra <amodra@gmail.com>
+
+ Fix haiku ld dependencies
+ I noticed after commit 8ad93045ed, "ld, gold: remove support for -z
+ bndplt (MPX prefix)", that some of my builds were failing with
+
+ eelf_x86_64_haiku.c:650:9: error: no member named 'bndplt' in 'struct elf_linker_x86_params'
+ params.bndplt = true;
+ ~~~~~~ ^
+
+ * emulparams/aarch64haiku.sh: Use "source_sh" rather than ".".
+ * emulparams/armelf_haiku.sh: Likewise.
+ * emulparams/elf32ppchaiku.sh: Likewise.
+ * emulparams/elf_mipsel_haiku.sh: Likewise.
+ * emulparams/elf_x86_64_haiku.sh: Likewise.
+
+2022-12-14 Andrew Burgess <aburgess@redhat.com>
+
+ gdb: add SYMBOL_LOOKUP_SCOPED_DEBUG_ENTER_EXIT
+ After the previous commit converted symbol-lookup debug to use the new
+ debug scheme, this commit adds SYMBOL_LOOKUP_SCOPED_DEBUG_ENTER_EXIT.
+
+ The previous commit didn't add SYMBOL_LOOKUP_SCOPED_DEBUG_ENTER_EXIT
+ because symbol-lookup debug is controlled by an 'unsigned int' rather
+ than a 'bool' control variable, we use the numeric value to offer
+ different levels of verbosity for symbol-lookup debug.
+
+ The *_SCOPED_DEBUG_ENTER_EXIT mechanism currently relies on capturing
+ a reference to the bool control variable, and evaluating the variable
+ both on entry, and at exit, this is done in the scoped_debug_start_end
+ class (see gdbsupport/common-debug.h).
+
+ This commit templates scoped_debug_start_end so that the class can
+ accept either a 'bool &' or an invokable object, e.g. a lambda
+ function, or a function pointer.
+
+ The existing scoped_debug_start_end and scoped_debug_enter_exit macros
+ in common-debug.h are updated to support scoped_debug_enter_exit being
+ templated, however, nothing outside of common-debug.h needs to change.
+
+ I've then added SYMBOL_LOOKUP_SCOPED_DEBUG_ENTER_EXIT in symtab.h, and
+ added a couple of token uses in symtab.c. I didn't want to add too
+ much in this first commit, this is really about updating
+ common-debug.h to support this new functionality.
+
+ Within symtab.h I created a couple of global functions that can be
+ used to query the status of the symbol_lookup_debug control variable,
+ these functions are then used within the two existing macros:
+
+ symbol_lookup_debug_printf
+ symbol_lookup_debug_printf_v
+
+ and also in the new SYMBOL_LOOKUP_SCOPED_DEBUG_ENTER_EXIT macro.
+
+2022-12-14 Andrew Burgess <aburgess@redhat.com>
+
+ gdb: convert 'set debug symbol-lookup' to new debug printing scheme
+ Convert the implementation of 'set debug symbol-lookup' to the new
+ debug printing scheme.
+
+ In a few places I've updated the debug output to remove places where
+ the printed debug message included the function name, the new debug
+ scheme already adds that, but I haven't done all the possible updates.
+
+2022-12-14 Andrew Burgess <aburgess@redhat.com>
+
+ gdb/testsuite: new test for recent dwarf reader issue
+ This commit provides a test for this commit:
+
+ commit 55fc1623f942fba10362cb199f9356d75ca5835b
+ Date: Thu Nov 3 13:49:17 2022 -0600
+
+ Add name canonicalization for C
+
+ Which resolves PR gdb/29105. My reason for writing this test was a
+ desire to better understand the above commit, my process was to study
+ the commit until I thought I understood it, then write a test to
+ expose the issue. As the original commit didn't have a test, I
+ thought it wouldn't hurt to commit this upstream.
+
+ The problem tested for here is already described in the above commit,
+ but I'll give a brief description here. This description describes
+ GDB prior to the above commit:
+
+ - Builtin types are added to GDB using their canonical name,
+ e.g. "short", not "signed short",
+
+ - When the user does something like 'p sizeof(short)', then this is
+ handled in c-exp.y, and results in a call to lookup_signed_type
+ for the name "int". The "int" here is actually being looked up as
+ the type for the result of the 'sizeof' expression,
+
+ - In lookup_signed_type GDB first adds a 'signed' and looks for that
+ type, so in this case 'signed int', and, if that lookup fails, GDB
+ then looks up 'int',
+
+ - The problem is that 'signed int' is not the canonical name for a
+ signed int, so no builtin type with that name will be found, GDB
+ will then go to each object file in turn looking for a matching
+ type,
+
+ - When checking each object file, GDB will first check the partial
+ symtab to see if the full symtab should be expanded or not.
+ Remember, at this point GDB is looking for 'signed int', there
+ will be no partial symbols with that name, so GDB will not expand
+ anything,
+
+ - However, GDB checks each partial symbol using multiple languages,
+ not just the current language (C in this case), so, when GDB
+ checks using the C++ language, the symbol name is first
+ canonicalized (the code that does this can be found
+ lookup_name_info::language_lookup_name). As the canonical form of
+ 'signed int' is just 'int', GDB then looks for any symbols with
+ the name 'int', most partial symtabs will contain such a symbol,
+ so GDB ends up expanding pretty much every symtab.
+
+ The above commit fixes this by avoiding the use of non-canonical names
+ with C, now the initial builtin type lookup will succeed, and GDB
+ never even considers whether to expand any additional symtabs.
+
+ The test case creates a library that includes char, short, int, and
+ long types, and a test program that links against the library.
+
+ In the test script we start the inferior, but don't allow it to
+ progress far enough that the debug information for the library has
+ been fully expanded yet.
+
+ Then we evaluate some 'sizeof(TYPE)' expressions.
+
+ In the buggy version of GDB this would cause the debug information
+ for the library to be fully expanded, while in the fixed version of
+ GDB this will not be the case.
+
+ We use 'info sources' to determine if the debug information has been
+ fully expanded or not.
+
+ Bug: https://sourceware.org/bugzilla/show_bug.cgi?id=29105
+
+2022-12-14 Andrew Burgess <aburgess@redhat.com>
+
+ gdb/testsuite: fix readnow detection
+ The following commit broke the readnow detection in the testsuite:
+
+ commit dfaa040b440084dd73ebd359326752d5f44fc02c
+ Date: Mon Mar 29 18:31:31 2021 -0600
+
+ Remove some "OBJF_READNOW" code from dwarf2_debug_names_index
+
+ The testsuite checks if GDB was started with the -readnow flag by
+ using the 'maintenance print objfiles' command, and looking for the
+ string 'faked for "readnow"' in the output. This is implemented in
+ two helper procs `readnow` (gdb.exp) and `mi_readnow` (mi-support.exp).
+
+ The following tests all currently depend on this detection:
+
+ gdb.base/maint.exp
+ gdb.cp/nsalias.exp
+ gdb.dwarf2/debug-aranges-duplicate-offset-warning.exp
+ gdb.dwarf2/dw2-stack-boundary.exp
+ gdb.dwarf2/dw2-zero-range.exp
+ gdb.dwarf2/gdb-index-nodebug.exp
+ gdb.mi/mi-info-sources.exp
+ gdb.python/py-symbol.exp
+ gdb.rust/traits.exp
+
+ The following test also includes detection of 'readnow', but does the
+ detection itself by checking $::GDBFLAGS for the readnow flag:
+
+ gdb.opt/break-on-_exit.exp
+
+ The above commit removed from GDB the code that produced the 'faked
+ for "readnow"' string, as a consequence the testsuite can no longer
+ correctly spot when readnow is in use, and many of the above tests
+ will fail (at least partially).
+
+ When looking at the above tests, I noticed that gdb.rust/traits.exp
+ does call `readnow`, but doesn't actually use the result, so I've
+ removed the readnow call, this simplifies the next part of this patch
+ as gdb.rust/traits.exp was the only place an extra regexp was passed
+ to the readnow call.
+
+ Next I have rewritten `readnow` to check the $GDBFLAGS for the
+ -readnow flag, and removed the `maintenance print objfiles` check. At
+ least for all the tests above, when using the readnow board, this is
+ good enough to get everything passing again.
+
+ For the `mi_readnow` proc, I changed this to just call `readnow` from
+ gdb.exp, I left the mi_readnow name in place - in the future it might
+ be the case that we want to do some different checks here.
+
+ Finally, I updated gdb.opt/break-on-_exit.exp to call the `readnow`
+ proc.
+
+ With these changes, all of the tests listed above now pass correctly
+ when using the readnow board.
+
+2022-12-14 Li Xu <xuli1@eswincomputing.com>
+
+ RISC-V: Add string length check for operands in AS
+ The current AS accepts invalid operands due to miss of operands length check.
+ For example, "e6" is an invalid operand in (vsetvli a0, a1, e6, mf8, tu, ma),
+ but it's still accepted by assembler. In detail, the condition check "strncmp
+ (array[i], *s, len) == 0" in arg_lookup function passes with "strncmp ("e64",
+ "e6", 2)" in the case above. So the generated encoding is same as that of
+ (vsetvli a0, a1, e64, mf8, tu, ma).
+
+ This patch fixes issue above by prompting an error in such case and also adds
+ a new testcase.
+
+ gas/ChangeLog:
+
+ * config/tc-riscv.c (arg_lookup): Add string length check for operands.
+ * testsuite/gas/riscv/vector-insns-fail-vsew.d: New testcase for an illegal vsew.
+ * testsuite/gas/riscv/vector-insns-fail-vsew.l: Likewise.
+ * testsuite/gas/riscv/vector-insns-fail-vsew.s: Likewise.
+
+2022-12-14 Jan Beulich <jbeulich@suse.com>
+
+ x86: adjust type checking constructs
+ As Alan points out, ASAN takes issue with these constructs, for
+ current_templates being NULL. Wrap them in sizeof(), so the expressions
+ aren't actually evaluated.
+
+2022-12-14 Martin Liska <mliska@suse.cz>
+
+ ld, gold: remove support for -z bndplt (MPX prefix)
+ bfd/ChangeLog:
+
+ * elf-linker-x86.h (struct elf_linker_x86_params): Remove
+ bndplt.
+ * elf64-x86-64.c (elf_x86_64_scan_relocs): Ignore
+ R_X86_64_PLT32_BND.
+ (elf_x86_64_relocate_section): Similarly here.
+ (elf_x86_64_link_setup_gnu_properties): Ignore bndplt.
+ * elfxx-x86.c: Likewise.
+ * elfxx-x86.h: Likewise.
+
+ gold/ChangeLog:
+
+ * NEWS: Document -z bndplt.
+ * options.h (class General_options): Remove bndplt option.
+ * x86_64.cc (class Output_data_plt_x86_64_bnd): Remove.
+ (Target_x86_64::do_make_data_plt): Do not use
+ Output_data_plt_x86_64_bnd.
+ (Target_x86_64::Scan::get_reference_flags): Likewise.
+ (Target_x86_64::Scan::check_non_pic): Likewise.
+ (Target_x86_64::Scan::local): Likewise.
+ (Target_x86_64::Scan::global): Likewise.
+
+ ld/ChangeLog:
+
+ * NEWS: Document -z bndplt.
+ * emulparams/elf_x86_64.sh: Remove bndplt option.
+ * ld.texi: Likewise.
+ * testsuite/ld-x86-64/x86-64.exp:
+ * testsuite/ld-x86-64/bnd-branch-1-now.d: Removed.
+ * testsuite/ld-x86-64/bnd-branch-1.d: Removed.
+ * testsuite/ld-x86-64/bnd-branch-1.s: Removed.
+ * testsuite/ld-x86-64/bnd-ifunc-1-now.d: Removed.
+ * testsuite/ld-x86-64/bnd-ifunc-1.d: Removed.
+ * testsuite/ld-x86-64/bnd-ifunc-1.s: Removed.
+ * testsuite/ld-x86-64/bnd-ifunc-2-now.d: Removed.
+ * testsuite/ld-x86-64/bnd-ifunc-2.d: Removed.
+ * testsuite/ld-x86-64/bnd-ifunc-2.s: Removed.
+ * testsuite/ld-x86-64/bnd-plt-1-now.d: Removed.
+ * testsuite/ld-x86-64/bnd-plt-1.d: Removed.
+ * testsuite/ld-x86-64/mpx.exp: Removed.
+ * testsuite/ld-x86-64/mpx1.out: Removed.
+ * testsuite/ld-x86-64/mpx1a.c: Removed.
+ * testsuite/ld-x86-64/mpx1a.rd: Removed.
+ * testsuite/ld-x86-64/mpx1b.c: Removed.
+ * testsuite/ld-x86-64/mpx1c.c: Removed.
+ * testsuite/ld-x86-64/mpx1c.rd: Removed.
+ * testsuite/ld-x86-64/mpx2.out: Removed.
+ * testsuite/ld-x86-64/mpx2a.c: Removed.
+ * testsuite/ld-x86-64/mpx2a.rd: Removed.
+ * testsuite/ld-x86-64/mpx2b.c: Removed.
+ * testsuite/ld-x86-64/mpx2c.c: Removed.
+ * testsuite/ld-x86-64/mpx2c.rd: Removed.
+ * testsuite/ld-x86-64/mpx3.dd: Removed.
+ * testsuite/ld-x86-64/mpx3a.s: Removed.
+ * testsuite/ld-x86-64/mpx3b.s: Removed.
+ * testsuite/ld-x86-64/mpx3n.dd: Removed.
+ * testsuite/ld-x86-64/mpx4.dd: Removed.
+ * testsuite/ld-x86-64/mpx4a.s: Removed.
+ * testsuite/ld-x86-64/mpx4b.s: Removed.
+ * testsuite/ld-x86-64/mpx4n.dd: Removed.
+ * testsuite/ld-x86-64/pr20800a.S: Removed.
+ * testsuite/ld-x86-64/pr20800b.S: Removed.
+ * testsuite/ld-x86-64/pr21038a-now.d: Removed.
+ * testsuite/ld-x86-64/pr21038a.d: Removed.
+ * testsuite/ld-x86-64/pr21038a.s: Removed.
+ * testsuite/ld-x86-64/pr21038b-now.d: Removed.
+ * testsuite/ld-x86-64/pr21038b.d: Removed.
+ * testsuite/ld-x86-64/pr21038b.s: Removed.
+ * testsuite/ld-x86-64/pr21038c-now.d: Removed.
+ * testsuite/ld-x86-64/pr21038c.d: Removed.
+ * testsuite/ld-x86-64/pr21038c.s: Removed.
+
+2022-12-14 Alan Modra <amodra@gmail.com>
+
+ asan: signed integer overflow in display_debug_frames
+ * dwarf.c (struct Frame_Chunk): Make col_offset an int64_t.
+ Adjust all places allocating col_offset and col_type to use
+ the size of the array element rather than the size of a type.
+ (frame_display_row): Adjust printing of col_offset.
+ (display_debug_frames): Factor out multiplication by
+ code_factor and data_factor. Avoid signed overflow. Use
+ 64-bit variables.
+
+2022-12-14 Alan Modra <amodra@gmail.com>
+
+ Don't access freed memory printing objcopy warning
+ abfd->filename will be freed if bfd_close gets far enough to delete
+ the bfd. It's possible to have an error from fclose at this point.
+
+ * objcopy.c (copy_archive): Dup filename before closing bfd for
+ potential use in bfd_nonfatal_message.
+
+2022-12-14 GDB Administrator <gdbadmin@sourceware.org>
+
+ Automatic date update in version.in
+
+2022-12-13 Tom Tromey <tromey@adacore.com>
+
+ Fix control-c handling on Windows
+ As Hannes pointed out, the Windows target-async patches broke C-c
+ handling there. Looking into this, I found a few oddities, fixed
+ here.
+
+ First, windows_nat_target::interrupt calls GenerateConsoleCtrlEvent.
+ I think this event can be ignored by the inferior, so it's not a great
+ way to interrupt. Instead, using DebugBreakProcess (or a more
+ complicated thing for Wow64) seems better.
+
+ Second, windows_nat_target did not implement the pass_ctrlc method.
+ Implementing this lets us remove the special code to call
+ SetConsoleCtrlHandler and instead integrate into gdb's approach to C-c
+ handling. I believe that this should also fix the race that's
+ described in the comment that's being removed.
+
+ Initially, I thought a simpler version of this patch would work.
+ However, I think what happens is that some other library (I'm not sure
+ what) calls SetConsoleCtrlHandler while gdb is running, and this
+ intercepts and handles C-c -- so that the gdb SIGINT handler is not
+ called. C-break continues to work, presumably because whatever
+ handler is installed ignores it.
+
+ This patch works around this issue by ensuring that the gdb handler
+ always comes first.
+
+2022-12-13 Tom Tromey <tromey@adacore.com>
+
+ Refactor code to check for terminal sharing
+ This refactors the code to check for terminal sharing.
+ is_gdb_terminal is exported, and sharing_input_terminal_1 is renamed,
+ slightly refactored, and moved to posix-hdep.c. A new
+ Windows-specific implementation of this function is added to
+ mingw-hdep.c.
+
+ MSDN has a warning about GetConsoleProcessList
+
+ This API is not recommended and does not have a virtual terminal
+ equivalent. [...] Applications remoting via cross-platform
+ utilities and transports like SSH may not work as expected if
+ using this API.
+
+ However, we believe this isn't likely to be an issue for gdb.
+
+2022-12-13 Tom Tromey <tromey@adacore.com>
+
+ Use gdb::optional for sigint_ours
+ sigint_ours (and sigquit_ours) can be used without being set. Avoid
+ this problem by changing them to gdb::optional and checking that they
+ are in fact set before using the value.
+
+ Rename install_sigint_handler
+ A subsequent patch will introduce a global 'install_sigint_handler'
+ function, so first rename the static one in extension.c.
+
+2022-12-13 Tom de Vries <tdevries@suse.de>
+
+ [gdb/tdep] Fix s390_linux_nat_target::stopped_by_watchpoint
+ On s390x-linux, I run into:
+ ...
+ (gdb) continue^M
+ Continuing.^M
+ breakpoint.c:5784: internal-error: bpstat_stop_status_nowatch: \
+ Assertion `!target_stopped_by_watchpoint ()' failed.^M
+ A problem internal to GDB has been detected,^M
+ further debugging may prove unreliable.^M
+ FAIL: gdb.threads/watchpoint-fork.exp: parent: singlethreaded: \
+ breakpoint after the first fork (GDB internal error)
+ ...
+
+ What happens is the follow:
+ - a watchpoint event triggers
+ - the event is processed, s390_linux_nat_target::stopped_by_watchpoint is called and
+ it returns true, as expected
+ - the watchpoint event is reported by gdb, and gdb stops
+ - we issue a continue command
+ - a fork event triggers
+ - the event is processed, and during processing that event
+ s390_linux_nat_target::stopped_by_watchpoint is called again, and returns
+ true
+ - the assertion fails, because the function is expected to return false
+
+ The function s390_linux_nat_target::stopped_by_watchpoint returns true the
+ second time, because it looks at the exact same data that was looked at when
+ it was called the first time, and that data hasn't changed.
+
+ There's code in the same function that intends to prevent that from happening:
+ ...
+ /* Do not report this watchpoint again. */
+ memset (&per_lowcore, 0, sizeof (per_lowcore));
+ if (ptrace (PTRACE_POKEUSR_AREA, s390_inferior_tid (), &parea, 0) < 0)
+ perror_with_name (_("Couldn't clear watchpoint status"));
+ ...
+ and that probably used to work for older kernels, but no longer does since
+ linux kernel commit 5e9a26928f55 ("[S390] ptrace cleanup").
+
+ Fix this by copying this:
+ ...
+ siginfo_t siginfo;
+ if (!linux_nat_get_siginfo (inferior_ptid, &siginfo))
+ return false;
+ if (siginfo.si_signo != SIGTRAP
+ || (siginfo.si_code & 0xffff) != TRAP_HWBKPT)
+ return false;
+ ...
+ from aarch64_linux_nat_target::stopped_data_address and remove the
+ obsolete watchpoint status clearing code.
+
+ Tested on s390x-linux.
+
+ Approved-By: Ulrich Weigand <uweigand@de.ibm.com>
+
+2022-12-13 H.J. Lu <hjl.tools@gmail.com>
+
+ gold: Remove BND from 64-bit x86-64 IBT PLT
+ Since MPX support has been removed from x86-64 psABI, remove BND from
+ 64-bit IBT PLT by using 32-bit IBT PLT.
+
+ PR gold/29851
+ * x86_64.cc (Output_data_plt_x86_64_ibt<32>::first_plt_entry):
+ Renamed to ...
+ (Output_data_plt_x86_64_ibt<size>::first_plt_entry): This.
+ (Output_data_plt_x86_64_ibt<64>::first_plt_entry): Removed.
+ (Output_data_plt_x86_64_ibt<size>::do_fill_first_plt_entry):
+ Drop the size == 32 check.
+ (Output_data_plt_x86_64_ibt<32>::plt_entry): Renamed to ...
+ (Output_data_plt_x86_64_ibt<size>::plt_entry): This.
+ (Output_data_plt_x86_64_ibt<64>::plt_entry): Removed.
+ (Output_data_plt_x86_64_ibt<32>::aplt_entry): Renamed to ...
+ (Output_data_plt_x86_64_ibt<size>::aplt_entry): This.
+ (Output_data_plt_x86_64_ibt<64>::aplt_entry): Removed.
+ (Output_data_plt_x86_64_ibt<size>::do_fill_plt_entry): Drop the
+ size == 32 check.
+ (Output_data_plt_x86_64_ibt<size>::fill_aplt_entry): Likewise.
+
+2022-12-13 Tom Tromey <tromey@adacore.com>
+
+ Remove two unnecessary casts
+ A couple of calls to parse_probe_linespec had an unnecessary cast. I
+ suspect this cast was never needed, but once commands were changed to
+ take a 'const' argument, they became completely obsolete. Tested by
+ rebuilding.
+
+2022-12-13 Andrew Burgess <aburgess@redhat.com>
+
+ gdb/testsuite: avoid creating temp file in gdb/testsuite/ directory
+ After this commit:
+
+ commit 33c1395cf5e9deec7733691ba32c450e5c27f757
+ Date: Fri Nov 11 15:26:46 2022 +0000
+
+ gdb/testsuite: fix gdb.trace/unavailable-dwarf-piece.exp with Clang
+
+ The gdb.trace/unavailable-dwarf-piece.exp test script was creating a
+ temporary file in the build/gdb/testsuite/ directory, instead of in
+ the expected place in the outputs directory.
+
+ Fix this by adding a call to standard_output_file.
+
+2022-12-13 Tom de Vries <tdevries@suse.de>
+
+ [gdb/testsuite] Fix gdb.python/py-disasm.exp on s390x
+ On s390x-linux, I run into:
+ ...
+ (gdb) disassemble test^M
+ Dump of assembler code for function test:^M
+ 0x0000000001000638 <+0>: stg %r11,88(%r15)^M
+ 0x000000000100063e <+6>: lgr %r11,%r15^M
+ 0x0000000001000642 <+10>: nop 0^M
+ => 0x0000000001000646 <+14>: nop 0^M
+ 0x000000000100064a <+18>: nop 0^M
+ 0x000000000100064e <+22>: lhi %r1,0^M
+ 0x0000000001000652 <+26>: lgfr %r1,%r1^M
+ 0x0000000001000656 <+30>: lgr %r2,%r1^M
+ 0x000000000100065a <+34>: lg %r11,88(%r11)^M
+ 0x0000000001000660 <+40>: br %r14^M
+ End of assembler dump.^M
+ (gdb) FAIL: gdb.python/py-disasm.exp: global_disassembler=: disassemble test
+ ...
+
+ The problem is that the test-case expects "nop" but on s390x we have instead
+ "nop\t0".
+
+ Fix this by allowing the insn.
+
+ Tested on s390x-linux and x86_64-linux.
+
+2022-12-13 Jan Beulich <jbeulich@suse.com>
+
+ gas: re-work line number tracking for macros and their expansions
+ The PR gas/16908 workaround aimed at uniformly reporting line numbers
+ to reference macro invocation sites. As mentioned in a comment this may
+ be desirable for small macros, but often isn't for larger ones. As a
+ first step improve diagnostics to report both locations, while aiming at
+ leaving generated debug info unaltered.
+
+ Note that macro invocation context is lost for any diagnostics issued
+ only after all input was processed (or more generally for any use of
+ as_*_where(), as the functions can't know whether the passed in location
+ is related to [part of] the present stack of locations). To maintain the
+ intended workaround behavior for PR gas/16908, a new as_where() is
+ introduced to "look through" macro invocations, while the existing
+ as_where() is renamed (and used in only very few places for now). Down
+ the road as_where() will likely want to return a list of (file,line)
+ pairs.
+
+2022-12-13 Jan Beulich <jbeulich@suse.com>
+
+ Arm: avoid unhelpful uses of .macro in testsuite
+ Macros with just a single use site are a little pointless to have, and
+ even in further cases .irp is more suitable for the purpose. Expand such
+ inline, avoiding the need to touch the testcases when diagnostics are
+ changed for code resulting from macro expansion.
+
+ While there also make what was "iter_mla" in sp-usage-thumb2-relax cover
+ smlatt as well, rather than testing smlabt twice.
+
+2022-12-13 Tom Tromey <tom@tromey.com>
+
+ Fix crash in is_nocall_function
+ is_nocall_function anticipates only being called for a function or a
+ method. However, PR gdb/29871 points out a situation where an unusual
+ expression -- but one that parses to a valid, if extremely weird,
+ function call -- breaks this assumption.
+
+ This patch changes is_nocall_function to remove this assert and
+ instead simply return 'false' in this case.
+
+ Approved-By: Simon Marchi <simon.marchi@efficios.com>
+ Bug: https://sourceware.org/bugzilla/show_bug.cgi?id=29871
+
+2022-12-13 Johnson Sun <j3.soon777@gmail.com>
+
+ Replace gdbpy_should_stop with gdbpy_breakpoint_cond_says_stop
+ In 2014, the function `gdbpy_should_stop' has been replaced with
+ `gdbpy_breakpoint_cond_says_stop'
+
+ This replaces `gdbpy_should_stop' with `gdbpy_breakpoint_cond_says_stop' in the
+ comments.
+
+ Since `gdbpy_should_stop' has been renamed as noted in `gdb/ChangeLog-2014':
+
+ * python/py-breakpoint.c (gdbpy_breakpoint_cond_says_stop): Renamed
+ from gdbpy_should_stop. Change result type to enum scr_bp_stop.
+
+ Change-Id: I0ef3491ce5e057c5e75ef8b569803b30a5838575
+ Approved-By: Simon Marchi <simon.marchi@efficios.com>
+
+2022-12-13 Alan Modra <amodra@gmail.com>
+
+ asan: mips_hi16_list segfault in bfd_get_section_limit_octets
+ static variables like mips_hi16_list are nasty for applications using
+ bfd. It is possible when opening and closing bfds with mis-matched
+ hi/lo relocs to leave a stale section pointer on the list. That can
+ cause a segfault if multiple bfds are being processed.
+
+ Tidying the list when closing is sufficient to stop this happening
+ (and fixes small memory leaks). This patch goes further and moves
+ mips_hi16_list to where it belongs in the bfd tdata.
+
+ * elf32-mips.c (bfd_elf32_close_and_cleanup(: Define.
+ * elf64-mips.c (bfd_elf64_close_and_cleanup): Define.
+ * elfn32-mips.c (bfd_elf32_close_and_cleanup(: Define.
+ * elfxx-mips.c (struct mips_hi16): Move earlier.
+ (mips_hi16_list): Move to..
+ (struct mips_elf_obj_tdata): ..here.
+ (_bfd_mips_elf_close_and_cleanup): New function.
+ (_bfd_mips_elf_hi16_reloc, _bfd_mips_elf_lo16_reloc),
+ (_bfd_elf_mips_get_relocated_section_contents): Adjust uses of
+ mips_hi16_list.
+ * elfxx-mips.h (_bfd_mips_elf_close_and_cleanup): Declare.
+
+2022-12-13 GDB Administrator <gdbadmin@sourceware.org>
+
+ Automatic date update in version.in
+
+2022-12-12 Indu Bhagat <indu.bhagat@oracle.com>
+
+ libctf: remove unnecessary zstd constructs
+ This patch is essentially a revert of
+ commit-id: 8818c80cbd4116ef5af171ec47c61167179e225c
+ (libctf: Add ZSTD_LIBS to LIBS so that ac_cv_libctf_bfd_elf can be true)
+
+ As the specific configure check now uses libtool, this explicit mention of the
+ dependency $ZSTD_LIBS is not needed anymore.
+
+ ChangeLog:
+
+ * libctf/Makefile.in: Regenerated.
+ * libctf/aclocal.m4: Likewise.
+ * libctf/config.h.in: Likewise.
+ * libctf/configure: Likewise.
+ * libctf/configure.ac: Remove ZSTD_LIBS from LIBS. Cleanup
+ unused AC_ZSTD.
+
+2022-12-12 Indu Bhagat <indu.bhagat@oracle.com>
+
+ libctf: remove AC_CONFIG_MACRO_DIR
+ ACLOCAL_AMFLAGS is being set already. So using AC_CONFIG_MACRO_DIR is
+ unnecessary.
+
+ ChangeLog:
+
+ * libctf/configure: Regenerated.
+ * libctf/configure.ac: remove AC_CONFIG_MACRO_DIR usage.
+
+2022-12-12 Indu Bhagat <indu.bhagat@oracle.com>
+
+ libctf: remove unnecessary zlib constructs
+ This dependency is managed via libtool. So explicit addition to LDFLAGS
+ and LIBS is not necessary anymore.
+
+ ChangeLog:
+
+ * libctf/configure: Regenerated.
+ * libctf/configure.ac: remove zlib from LDFLAGS and LIBS.
+
+2022-12-12 Tom de Vries <tdevries@suse.de>
+
+ [gdb/testsuite] Fix PR20630 regression test in gdb.base/printcmds.exp
+ On s390x-linux, I run into:
+ ...
+ (gdb) print {unsigned char}{65}^M
+ $749 = 0 '\000'^M
+ (gdb) FAIL: gdb.base/printcmds.exp: print {unsigned char}{65}
+ ...
+
+ In contrast, on x86_64-linux, we have:
+ ...
+ (gdb) print {unsigned char}{65}^M
+ $749 = 65 'A'^M
+ (gdb) PASS: gdb.base/printcmds.exp: print {unsigned char}{65}
+ ...
+
+ The first problem here is that the test is supposed to be a regression test
+ for PR20630, which can be reproduced (for an unfixed gdb) like this:
+ ...
+ (gdb) p {unsigned char[]}{0x17}
+ gdbtypes.c:4641: internal-error: copy_type: \
+ Assertion `TYPE_OBJFILE_OWNED (type)' failed.
+ ...
+ but it's not due to insufficient quoting (note the dropped '[]').
+
+ That's easy to fix, but after that we have on s390 (big endian):
+ ...
+ (gdb) print {unsigned char[]}{65}^M
+ $749 = ""^M
+ ...
+ and on x86_64 (little endian):
+ ...
+ (gdb) print {unsigned char[]}{65}^M
+ $749 = "A"^M
+ ...
+
+ Fix this by using 0xffffffff, such that in both cases we have:
+ ...
+ (gdb) print {unsigned char[]}{0xffffffff}^M
+ $749 = "\377\377\377\377"^M
+ ...
+
+ Tested on x86_64-linux and s390x-linux.
+
+2022-12-12 Alan Modra <amodra@gmail.com>
+
+ PR29893, buffer overflow in display_debug_addr
+ PR 29893
+ * dwarf.c (display_debug_addr): Sanity check dwarf5 unit_length
+ field. Don't read past end.
+
+2022-12-12 Tom Tromey <tom@tromey.com>
+
+ Another Rust operator precedence bug
+ My earlier patch to fix PR rust/29859 introduced a new operator
+ precedence bug in the Rust parser. Assignment operators are
+ right-associative in Rust. And, while this doesn't often matter, as
+ Rust assignments always have the value (), still as a matter of
+ principle we should get this correct.
+
+ Bug: https://sourceware.org/bugzilla/show_bug.cgi?id=29859
+
+2022-12-12 Tom de Vries <tdevries@suse.de>
+
+ [gdb/testsuite] Fix gdb.base/write_mem.exp for big endian
+ On s390x-linux (big endian), I run into:
+ ...
+ (gdb) x /xh main^M
+ 0x1000638 <main>: 0x0000^M
+ (gdb) FAIL: gdb.base/write_mem.exp: x /xh main
+ ...
+
+ In contrast, on x86_64-linux (little endian), we have the expected:
+ ...
+ (gdb) x /xh main^M
+ 0x4004a7 <main>: 0x4242^M
+ (gdb) PASS: gdb.base/write_mem.exp: x /xh main
+ ...
+
+ The problem is that the test-case hard-codes expectations about endiannes by
+ writing an int-sized value (4 bytes in this case) and then printing only a
+ halfword by using "/h" (so, two bytes).
+
+ If we print 4 bytes, we have for s390x:
+ ...
+ 0x1000638 <main>: 0x00004242^M
+ ...
+ and for x86_64:
+ ...
+ 0x4004a7 <main>: 0x00004242^M
+ ...
+
+ Fix this by removing the "/h".
+
+ Tested on x86_64-linux and s390x-linux.
+
+2022-12-12 Jan Vrany <jan.vrany@labware.com>
+
+ gdb: fix possible use-after-free when executing commands
+ In principle, `execute_command()` does following:
+
+ struct cmd_list_element *c;
+ c = lookup_cmd ( ... );
+ ...
+ /* If this command has been pre-hooked, run the hook first. */
+ execute_cmd_pre_hook (c);
+ ...
+ /* ...execute the command `c` ...*/
+ ...
+ execute_cmd_post_hook (c);
+
+ This may lead into use-after-free error. Imagine the command
+ being executed is a user-defined Python command that redefines
+ itself. In that case, struct `cmd_list_element` pointed to by
+ `c` is deallocated during its execution so it is no longer valid
+ when post hook is executed.
+
+ To fix this case, this commit looks up the command once again
+ after it is executed to get pointer to (possibly newly allocated)
+ `cmd_list_element`.
+
+2022-12-12 Jan Beulich <jbeulich@suse.com>
+
+ x86: further re-work insn/suffix recognition to also cover MOVSX
+ PR gas/29524
+
+ Having templates with a suffix explicitly present has always been
+ quirky. After prior adjustment all that's left to also eliminate the
+ anomaly from move-with-sign-extend is to consolidate the insn templates
+ and to make may_need_pass2() cope (plus extend testsuite coverage).
+
+2022-12-12 Jan Beulich <jbeulich@suse.com>
+
+ x86: drop (now) stray IsString
+ The need for them on the operand-less string insns has gone away with
+ the removal of maybe_adjust_templates() and associated logic. Since
+ i386_index_check() needs adjustment then anyway, take the opportunity
+ and also simplify it, possible again as a result of said removal (plus
+ the opcode template adjustments done here).
+
+2022-12-12 Jan Beulich <jbeulich@suse.com>
+
+ x86: move bad-use-of-TLS-reloc check
+ Having it in match_template() is unhelpful. Neither does looking for the
+ next template to possibly match make any sense in that case, nor is the
+ resulting diagnostic making clear what the problem is.
+
+ While moving the check, also generalize it to include all SIMD and VEX-
+ encoded insns. This way an existing conditional can be re-used in
+ md_assemble(). Note though that this still leaves a lof of insns which
+ are also wrong to use with these relocations.
+
+ Further fold the remaining check (BFD_RELOC_386_GOT32) with the XRELEASE
+ related one a few lines down. This again allows re-using an existing
+ conditional.
+
+2022-12-12 Jan Beulich <jbeulich@suse.com>
+
+ x86-64: allow HLE store of accumulator to absolute 32-bit address
+ In commit 1212781b35c9 ("ix86: allow HLE store of accumulator to
+ absolute address") I was wrong to exclude 64-bit code. Dropping the
+ check also leads to better diagnostics in 64-bit code ("MOV", after
+ all, isn't invalid with "XRELEASE").
+
+ While there also limit the amount of further checks done: The operand
+ type checks that were there were effectively redundant with other ones
+ anyway, plus it's quite fine to also have "xrelease mov <disp>, %eax"
+ look for the next MOV template (in fact again also improving
+ diagnostics).
+
+2022-12-12 Jan Beulich <jbeulich@suse.com>
+
+ ix86: don't recognize/derive Q suffix in the common case
+ Have its use, except where actually legitimate, result in the same "only
+ supported in 64-bit mode" diagnostic as emitted for other 64-bit only
+ insns. Also suppress deriving of the suffix in Intel mode except in the
+ legitimate cases. This in exchange allows dropping the respective code
+ from match_template().
+
+ To maintain reasonable diagnostics (in particular to avoid "`mov' is
+ only supported in 64-bit mode" on the SIMD forms of MOVQ) we need to
+ defer parse_insn()'s emitting of errors unrelated to prefix parsing.
+ Utilize i.error just like match_template() does.
+
+ Oddly enough despite gcc's preference towards FILDQ and FIST{,T}Q we
+ had no testcase whatsoever for these. Therefore such tests are being
+ added. Note that the removed line in the x86-64-lfence-load testcase
+ was redundant with the exact same one a few lines up.
+
+2022-12-12 Jan Beulich <jbeulich@suse.com>
+
+ x86: re-work insn/suffix recognition
+ Having templates with a suffix explicitly present has always been
+ quirky. Introduce a 2nd matching pass in case the 1st one couldn't find
+ a suitable template _and_ didn't itself already need to trim off a
+ suffix to find a match at all. This requires error reporting adjustments
+ (albeit luckily fewer than I was afraid might be necessary), as errors
+ previously reported during matching now need deferring until after the
+ 2nd pass (because, obviously, we must not emit any error if the 2nd pass
+ succeeds). While also related to PR gas/29524, it was requested that
+ move-with-sign-extend be left as broken as it always was.
+
+ PR gas/29525
+ Note that with the dropped CMPSD and MOVSD Intel Syntax string insn
+ templates taking operands, mixed IsString/non-IsString template groups
+ (with memory operands) cannot occur anymore. With that
+ maybe_adjust_templates() becomes unnecessary (and is hence being
+ removed).
+
+ PR gas/29526
+ Note further that while the additions to the intel16 testcase aren't
+ really proper Intel syntax, we've been permitting all of those except
+ for the MOVD variant. The test therefore is to avoid re-introducing such
+ an inconsistency.
+
+2022-12-12 Jan Beulich <jbeulich@suse.com>
+
+ x86: constify parse_insn()'s input
+ The function doesn't alter its input buffer: Reflect this in its
+ prototype. To avoid using any kind of cast, simply calculate the update
+ of "line" from the function's input and output.
+
+ x86: revert disassembler parts of "x86: Allow 16-bit register source for LAR and LSL"
+ This reverts the disassembler parts of 859aa2c86dc9 ("x86: Allow 16-bit
+ register source for LAR and LSL"), adjusting testcases as necessary.
+ That change was itself a partial revert of c9f5b96bdab0 ("x86: correct
+ handling of LAR and LSL"), without actually saying so. While the earlier
+ commit was properly agreed upon, the partial revert was not, and hence
+ should not have been committed. This is even more so that the revert
+ part of that change wasn't even necessary to address PR gas/29844.
+
+2022-12-12 Alan Modra <amodra@gmail.com>
+
+ PR29892, Field file_table of struct module is uninitialized
+ PR 29892
+ * vms-alphs.c (new_module): Use bfd_zmalloc to alloc file_table.
+ (parse_module): Rewrite file_table reallocation code and clear.
+
+ Lack of bounds checking in vms-alpha.c parse_module
+ PR 29873
+ PR 29874
+ PR 29875
+ PR 29876
+ PR 29877
+ PR 29878
+ PR 29879
+ PR 29880
+ PR 29881
+ PR 29882
+ PR 29883
+ PR 29884
+ PR 29885
+ PR 29886
+ PR 29887
+ PR 29888
+ PR 29889
+ PR 29890
+ PR 29891
+ * vms-alpha.c (parse_module): Make length param bfd_size_type.
+ Delete length == -1 checks. Sanity check record_length.
+ Sanity check DST__K_MODBEG, DST__K_RTNBEG, DST__K_RTNEND lengths.
+ Sanity check DST__K_SOURCE and DST__K_LINE_NUM elements
+ before accessing.
+ (build_module_list): Pass dst_section size to parse_module.
+
+2022-12-12 Alan Modra <amodra@gmail.com>
+
+ PR29872, uninitialised value in display_debug_lines_decoded dwarf.c:5413
+ Plus segvs if the C-library doesn't handle printf %s of NULL.
+
+ PR 29872
+ * dwarf.c (null_name): New function.
+ (process_debug_info): Use it here..
+ (display_debug_lines_raw): ..and here..
+ (display_debug_lines_decoded): ..and here. xcalloc directory_table.
+ Simplify xcalloc of file_table.
+
+2022-12-12 Jan Beulich <jbeulich@suse.com>
+
+ gas/codeview: avoid "shadowing" of glibc function name
+ While not "index" this time, old enough glibc also has an (unguarded)
+ declaration of fileno() in stdio.h, which triggers a "shadows a global
+ declaration" warning with our choice of warning level and with at least
+ some gcc versions.
+
+ x86: generate template sets data at build time
+ Speed up gas startup by avoiding runtime allocation of the instances of
+ type "templates". At the same time cut the memory requirement to just
+ very little over half (not even accounting for any overhead
+ notes_alloc() may incur) by reusing the "end" slot of a preceding entry
+ for the "start" slot of the subsequent one.
+
+ x86: drop sentinel from i386_optab[]
+ Now that the table is local to gas, ARRAY_SIZE() can be used to
+ determine the end of the table. Re-arrange the processing loop in
+ md_begin() accordingly, at the same time folding the two calls to
+ notes_alloc() into just one.
+
+ x86: add generated tables dependency check to gas
+ As requested by H.J., just for the sake of people potentially building
+ in gas/ alone, add a check that the generated files in opcodes/ are
+ actually up-to-date. Personally I think this should at best be a
+ warning, but I can see how this may not be easily noticable among other
+ make output (depending in particular on the verbosity level).
+
+ x86: break gas dependency on libopcodes
+ gas doesn't use anything from libopcodes anymore - suppress linking in
+ that library.
+
+ x86: remove i386-opc.c
+ Remove the now empty i386-opc.c. To compensate, tie table generation in
+ opcodes/ to the building of i386-dis.o, despite the file not really
+ depending on the generated data.
+
+2022-12-12 Jan Beulich <jbeulich@suse.com>
+
+ x86: instantiate i386_{op,reg}tab[] in gas instead of in libopcodes
+ Unlike many other architectures, x86 does not share an opcode table
+ between assembly and disassembly. Any consumer of libopcodes would only
+ ever access one of the two. Since gas is the only consumer of the
+ assembly data, move it there. While doing so mark respective entities
+ "static" in i386-gen (we may want to do away with i386_regtab_size
+ altogether).
+
+ This also shrinks the number of relocations to be processed for
+ libopcodes.so by about 30%.
+
+2022-12-12 GDB Administrator <gdbadmin@sourceware.org>
+
+ Automatic date update in version.in
+
+2022-12-11 Alan Modra <amodra@gmail.com>
+
+ PR29870, objdump SEGV in display_debug_lines_decoded dwarf.c:5524
+ DWARF5 directory and file table allow more opportunity for fuzzers
+ to break things. There are likely other places in dwarf.c that should
+ be fixed too.
+
+ PR 29870
+ * dwarf.c (display_debug_lines_decoded): Handle NULL file_table
+ name entry.
+
+2022-12-11 GDB Administrator <gdbadmin@sourceware.org>
+
+ Automatic date update in version.in
+
+2022-12-10 Tom de Vries <tdevries@suse.de>
+
+ [gdb/tdep] Fix larl handling in s390_displaced_step_fixup
+ On s390x-linux with target board unix/-m31, I run into:
+ ...
+ (gdb) PASS: gdb.guile/scm-lazy-string.exp: bad length
+ print ptr^M
+ $1 = 0x804006b0 <error: Cannot access memory at address 0x804006b0>^M
+ (gdb) FAIL: gdb.guile/scm-lazy-string.exp: ptr: print ptr
+ ...
+
+ A minimal example is:
+ ...
+ $ gdb -q -batch -ex "set trace-commands on" -x gdb.in
+ +file scm-lazy-string
+ +break main
+ Breakpoint 1 at 0x4005d2: file scm-lazy-string.c, line 23.
+ +run
+
+ Breakpoint 1, main () at scm-lazy-string.c:23
+ 23 const char *ptr = "pointer";
+ +step
+ 24 const char array[] = "array";
+ +print ptr
+ $1 = 0x804006b0 <error: Cannot access memory at address 0x804006b0>
+ ...
+
+ If we delete the breakpoint after running to it, we have instead the expected:
+ ...
+ +delete
+ +step
+ 24 const char array[] = "array";
+ +print ptr
+ $1 = 0x4006b0 "pointer"
+ ...
+
+ The problem is in displaced stepping, forced by the presence of the breakpoint,
+ when stepping over this insn:
+ ...
+ 0x4005d2 <main+10> larl %r1,0x4006b0
+ ...
+
+ With normal stepping we have:
+ ...
+ (gdb) p /x $r1
+ $2 = 0x3ff004006b0
+ ...
+ but with displaced stepping we have instead (note the 0x80000000 difference):
+ ...
+ (gdb) p /x $r1
+ $1 = 0x3ff804006b0
+ (gdb)
+ ...
+
+ The difference comes from this code in s390_displaced_step_fixup:
+ ...
+ /* Handle LOAD ADDRESS RELATIVE LONG. */
+ else if (is_ril (insn, op1_larl, op2_larl, &r1, &i2))
+ {
+ /* Update PC. */
+ regcache_write_pc (regs, from + insnlen);
+ /* Recompute output address in R1. */
+ regcache_cooked_write_unsigned (regs, S390_R0_REGNUM + r1,
+ amode | (from + i2 * 2));
+ }
+ ...
+ where the "amode |" adds the 0x80000000.
+
+ Fix this by removing the "amode |".
+
+ Tested on s390-linux, with native and target board unix/-m31.
+
+ Approved-By: Ulrich Weigand <uweigand@de.ibm.com>
+
+2022-12-10 GDB Administrator <gdbadmin@sourceware.org>
+
+ Automatic date update in version.in
+
+2022-12-09 Indu Bhagat <indu.bhagat@oracle.com>
+
+ objdump: sframe: fix memory leaks
+ ChangeLog:
+
+ * binutils/objdump.c (dump_section_sframe): free up contents and
+ SFrame decoder context on exit.
+
+2022-12-09 Indu Bhagat <indu.bhagat@oracle.com>
+
+ libsframe: rename API sframe_fde_func_info to sframe_fde_create_func_info
+ The new name better reflects the purpose of the function.
+
+ ChangeLog:
+
+ * bfd/elfxx-x86.c (_bfd_x86_elf_create_sframe_plt): Use new
+ name.
+ * libsframe/sframe.c (sframe_fde_create_func_info): Rename
+ sframe_fde_func_info to this.
+ * libsframe/testsuite/libsframe.encode/encode-1.c: Use new name.
+
+ include/ChangeLog:
+
+ * sframe-api.h (sframe_fde_create_func_info): Rename
+ sframe_fde_func_info to this.
+
+2022-12-09 Indu Bhagat <indu.bhagat@oracle.com>
+
+ gas: sframe: fine tune the fragment fixup for SFrame func info
+ SFrame function info is an unsigned 8-bit field comprising of the following
+ (from LSB to MSB):
+ - 4-bits: FRE type
+ - 1-bit: FRE start address encoding
+ - 3-bits: Unused
+
+ At the moment, the most-significat 4-bits are zero (The FRE start
+ address encoding of SFRAME_FDE_TYPE_PCINC has a value of zero, and the upper
+ 3-bits are unused). So the current implementation works without this patch.
+
+ To be precise, however, the fragment fixup logic is meant to fixup only the
+ least-significant 4-bits (i.e., only the FRE type needs to be updated
+ according to the function size).
+
+ This patch makes the gas implementation a bit more resilient: In the
+ future, when the format does evolve to make use of the currently unused
+ 3-bits in various ways, the values in those 3-bits can be propagated
+ unchanged while the fragment fixup continues to update the lowermost
+ 4-bits to indicate the selected FRE type.
+
+ ChangeLog:
+
+ * gas/gen-sframe.c (create_func_info_exp): New definition.
+ (output_sframe_funcdesc): Call create_func_info_exp.
+ * gas/sframe-opt.c (sframe_estimate_size_before_relax): The
+ associated fragment uses O_modulus now.
+ (sframe_convert_frag): Adjust the fragment fixup code according
+ to the new composite exp.
+
+2022-12-09 Indu Bhagat <indu.bhagat@oracle.com>
+
+ sframe: gas: libsframe: define constants and remove magic numbers
+ Define constants in sframe.h for the various limits associated with the
+ range of offsets that can be encoded in the start address of an SFrame
+ FRE. E.g., sframe_frame_row_entry_addr1 is used when start address
+ offset can be encoded as 1-byte unsigned value.
+
+ Update the code in gas to use these defined constants as it checks for
+ these limits, and remove the usage of magic numbers.
+
+ ChangeLog:
+
+ * gas/sframe-opt.c (sframe_estimate_size_before_relax):
+ (sframe_convert_frag): Do not use magic numbers.
+ * libsframe/sframe.c (sframe_calc_fre_type): Likewise.
+
+ include/ChangeLog:
+
+ * sframe.h (SFRAME_FRE_TYPE_ADDR1_LIMIT): New constant.
+ (SFRAME_FRE_TYPE_ADDR2_LIMIT): Likewise.
+ (SFRAME_FRE_TYPE_ADDR4_LIMIT): Likewise.
+
+2022-12-09 Indu Bhagat <indu.bhagat@oracle.com>
+
+ sframe.h: make some macros more precise
+ include/ChangeLog:
+
+ * sframe.h (SFRAME_V1_FUNC_INFO): Use specific bits only.
+ (SFRAME_V1_FRE_INFO): Likewise.
+
+2022-12-09 Indu Bhagat <indu.bhagat@oracle.com>
+
+ libsframe: minor formatting nits
+ ChangeLog:
+
+ * libsframe/sframe.c: Fix formatting nits.
+
+2022-12-09 Luis Machado <luis.machado@arm.com>
+
+ [aarch64] Add TPIDR2 register support for Linux
+ With the AArch64 Scalable Matrix Extension we have a new TPIDR2 register, and
+ it will be added to the existing NT_ARM_TLS register set. Kernel patches are
+ being reviewed here:
+
+ https://lore.kernel.org/linux-arm-kernel/20220818170111.351889-1-broonie@kernel.org/
+
+ From GDB's perspective, we handle it in a similar way to the existing TPIDR
+ register. But we need to consider cases of systems that only have TPIDR and
+ systems that have both TPIDR and TPIDR2.
+
+ With that in mind, the following patch adds the required code to support
+ TPIDR2 and turns the org.gnu.gdb.aarch64.tls feature into a
+ dynamically-generated target description as opposed to a static target
+ description containing only TPIDR.
+
+ That means we can remove the gdb/features/aarch64-tls.xml file and replace the
+ existing gdb/features/aarch64-tls.c auto-generated file with a new file that
+ dynamically generates the target description containing either TPIDR alone or
+ TPIDR and TPIDR2.
+
+ In the future, when *BSD's start to support this register, they can just
+ enable it as is being done for the AArch64 Linux target.
+
+ The core file read/write code has been updated to support TPIDR2 as well.
+
+ On GDBserver's side, there is a small change to the find_regno function to
+ expose a non-throwing version of it.
+
+ It always seemed strange to me how find_regno causes the whole operation to
+ abort if it doesn't find a particular register name. The patch moves code
+ from find_regno into find_regno_no_throw and makes find_regno call
+ find_regno_no_throw instead.
+
+ This allows us to do register name lookups to find a particular register
+ number without risking erroring out if nothing is found.
+
+ The patch also adjusts the feature detection code for aarch64-fbsd, since
+ the infrastructure is shared amongst all aarch64 targets. I haven't added
+ code to support TPIDR2 in aarch64-fbsd though, as I'm not sure when/if
+ that will happen.
+
+2022-12-09 Alan Modra <amodra@gmail.com>
+
+ PR28306, segfault in _bfd_mips_elf_reloc_unshuffle
+ Access to section data during relocation processing should be bounds
+ checked, as it is in bfd_perform_relocation. bfd_perform_relocation
+ does these checks after any special_function is called. So a reloc
+ special_function needs to do its own bounds checking before accessing
+ section data. This patch adds many such checks to the mips backend.
+
+ Checking mips relocs is not without some difficulty. See the comment
+ in _bfd_mips_reloc_offset_in_range. In a multitple reloc sequence
+ applied to the same location, relocs that may appear somewhere other
+ than the last one of the sequence need to be treated specially since
+ they apply to the addend for the next relocation rather than the
+ section contents. If the addend is in the section then it needs to be
+ checked but not when the addend is in the reloc. check_inplace
+ handles this situation. _bfd_mips_reloc_offset_in_range with
+ check_shuffle handles the case where contents are shuffled before
+ applying the relocation.
+
+ PR 28306
+ * elf32-mips.c (_bfd_mips_elf32_gprel16_reloc): Check reloc
+ address using _bfd_mips_reloc_offset_in_range.
+ (gprel32_with_gp, mips16_gprel_reloc): Likewise.
+ * elf64-mips.c (mips_elf64_gprel32_reloc): Likewise.
+ (mips16_gprel_reloc): Likewise.
+ * elfn32-mips.c (mips16_gprel_reloc): Likewise.
+ (gprel32_with_gp): Check reloc address using
+ bfd_reloc_offset_in_range.
+ * elfxx-mips.h (enum reloc_check): Define.
+ (_bfd_mips_reloc_offset_in_range): Declare.
+ * elfxx-mips.c (needs_shuffle): New function.
+ (_bfd_mips_elf_reloc_unshuffle, _bfd_mips_elf_reloc_shuffle): Use it.
+ (_bfd_mips_reloc_offset_in_range): New function.
+ (_bfd_mips_elf_gprel16_with_gp): Move reloc address checks to
+ partial_inplace handling. Use bfd_reloc_offset_in_range.
+ (_bfd_mips_elf_lo16_reloc): Check reloc address using
+ bfd_reloc_offset_in_range.
+ (_bfd_mips_elf_generic_reloc): Check reloc address using
+ _bfd_mips_reloc_offset_in_range.
+ (mips_elf_calculate_relocation): Check reloc address before calling
+ mips_elf_nullify_got_load.
+ (_bfd_mips_elf_check_relocs): Likewise.
+ (mips_elf_read_rel_addend): Add sec param, check reloc address
+ before reading. Adjust callers.
+ (mips_elf_add_lo16_rel_addend): Add sec param, adjust callers.
+
+2022-12-09 Tom de Vries <tdevries@suse.de>
+
+ [gdb/testsuite] Fix gdb.guile/scm-symtab.exp for ppc64le
+ On powerpc64le-linux, I run into:
+ ...
+ (gdb) PASS: gdb.guile/scm-symtab.exp: step out of func2
+ guile (print (> (sal-line (find-pc-line (frame-pc (selected-frame)))) line))^M
+ = #f^M
+ (gdb) FAIL: gdb.guile/scm-symtab.exp: test find-pc-line with resume address
+ ...
+
+ The problem is as follows: the instructions for the call to func2 are:
+ ...
+ 1000070c: 39 00 00 48 bl 10000744 <func1>
+ 10000710: 00 00 00 60 nop
+ 10000714: 59 00 00 48 bl 1000076c <func2>
+ 10000718: 00 00 00 60 nop
+ 1000071c: 00 00 20 39 li r9,0
+ ...
+ and the corresponding line number info is:
+ ...
+ scm-symtab.c:
+ File name Line number Starting address View Stmt
+ scm-symtab.c 42 0x1000070c x
+ scm-symtab.c 43 0x10000714 x
+ scm-symtab.c 44 0x1000071c x
+ ...
+
+ The test-case looks at the line numbers for two insns:
+ - the insn of the call to func2 (0x10000714), and
+ - the insn after that (0x10000718),
+ and expects the line number of the latter to be greater than the line number
+ of the former.
+
+ However, both insns have the same line number: 43.
+
+ Fix this by replacing ">" with ">=".
+
+ Tested on x86_64-linux and powerpc64le-linux.
+
+2022-12-09 GDB Administrator <gdbadmin@sourceware.org>
+
+ Automatic date update in version.in
+
+2022-12-08 H.J. Lu <hjl.tools@gmail.com>
+
+ x86-64: Remove BND from 64-bit IBT PLT
+ Since MPX support has been removed from x86-64 psABI, remove BND from
+ 64-bit IBT PLT by using x32 IBT PLT.
+
+ bfd/
+
+ PR ld/29851
+ * elf64-x86-64.c (elf_x86_64_get_synthetic_symtab): Also check
+ x32 IBT PLT for 64-bit.
+ (elf_x86_64_link_setup_gnu_properties): Always use x32 IBT PLT.
+
+ ld/
+
+ PR ld/29851
+ * testsuite/ld-x86-64/ibt-plt-1.d: Updated.
+ * testsuite/ld-x86-64/ibt-plt-2a.d: Likewise.
+ * testsuite/ld-x86-64/ibt-plt-2b.d: Likewise.
+ * testsuite/ld-x86-64/ibt-plt-2c.d: Likewise.
+ * testsuite/ld-x86-64/ibt-plt-2d.d: Likewise.
+ * testsuite/ld-x86-64/ibt-plt-3a.d: Likewise.
+ * testsuite/ld-x86-64/ibt-plt-3b.d: Likewise.
+ * testsuite/ld-x86-64/ibt-plt-3c.d: Likewise.
+ * testsuite/ld-x86-64/ibt-plt-3d.d: Likewise.
+ * testsuite/ld-x86-64/plt-main-ibt-x32.dd: Moved to ...
+ * testsuite/ld-x86-64/plt-main-ibt.dd: This.
+ * testsuite/ld-x86-64/x86-64.exp: Don't use plt-main-ibt-x32.dd.
+
+2022-12-08 Tom de Vries <tdevries@suse.de>
+
+ [gdb/testsuite] Require debug info for gdb.tui/tui-layout-asm-short-prog.exp
+ When running test-case gdb.tui/tui-layout-asm-short-prog.exp on SLE-12-SP3
+ aarch64, I run into:
+ ...
+ FAIL: gdb.tui/tui-layout-asm-short-prog.exp: check asm box contents
+ FAIL: gdb.tui/tui-layout-asm-short-prog.exp: check asm box contents again
+ ...
+ due to:
+ ...
+ (gdb) file tui-layout-asm-short-prog^M
+ Reading symbols from tui-layout-asm-short-prog...^M
+ (No debugging symbols found in tui-layout-asm-short-prog)^M
+ ...
+
+ I managed to reproduce the same behaviour on openSUSE Leap 15.4 x86_64, by
+ removing the debug option.
+
+ Fix this by making the test-case unsupported if no debug info is found.
+
+ Tested on x86_64-linux.
+
+2022-12-08 Enze Li <enze.li@hotmail.com>
+
+ gdb/testsuite: update a pattern in gdb_file_cmd
+ When building GDB with the following CFLAGS and CXXFLAGS as part of
+ configure line:
+
+ CFLAGS=-std=gnu11 CXXFLAGS=-std=gnu++11
+
+ Then run the selftest.exp, I see:
+
+ ======
+ Running /home/lee/dev/binutils-gdb/gdb/testsuite/gdb.gdb/selftest.exp
+ ...
+ FAIL: gdb.gdb/selftest.exp: run until breakpoint at captured_main
+ WARNING: Couldn't test self
+
+ === gdb Summary ===
+
+ # of unexpected failures 1
+ /home/lee/dev/binutils-gdb/gdb/gdb version 13.0.50.20221206-git -nw -nx
+ -iex "set height 0" -iex "set width 0" -data-directory
+ /home/lee/dev/binutils-gdb/gdb/testsuite/../data-directory
+ ======
+
+ It is the fact that when I use the previously mentioned CFLAGS and
+ CXXFLAGS as part of the configuration line, the default value (-O2 -g)
+ is overridden, then GDB has no debug information. When there's no debug
+ information, GDB should not run the testcase in selftest.exp.
+
+ The root cause of this FAIL is that the $gdb_file_cmd_debug_info didn't
+ get the right value ("nodebug") during the gdb_file_cmd procedure.
+
+ That's because in this commit,
+
+ commit 3453e7e409f44a79ac6695589836edb8a49bfb08
+ Date: Sat May 19 11:25:20 2018 -0600
+
+ Clean up "Reading symbols" output
+
+ It changed "no debugging..." to "No debugging..." which causes the above
+ problem. This patch only updates the corresponding pattern to fix this
+ issue.
+
+ With this patch applied, I see:
+
+ ======
+ Running /home/lee/dev/binutils-gdb/gdb/testsuite/gdb.gdb/selftest.exp
+ ...
+
+ === gdb Summary ===
+
+ # of untested testcases 1
+ /home/lee/dev/binutils-gdb/gdb/gdb version 13.0.50.20221206-git -nw -nx
+ -iex "set height 0" -iex "set width 0" -data-directory
+ /home/lee/dev/binutils-gdb/gdb/testsuite/../data-directory
+ ======
+
+ Tested on x86_64-linux.
+
+ Approved-By: Simon Marchi <simon.marchi@efficios.com>
+
+2022-12-08 Nick Clifton <nickc@redhat.com>
+
+ Update the description of the linker script's TYPE directive.
+ PR 29861
+ * ld.texi (Output Section Type): Note that setting the output
+ section type only works if the section contains untyped data.
+
+2022-12-08 Jan Vrany <jan.vrany@labware.com>
+
+ gdb: skip objfiles with no BFD in DWARF unwinder
+ While playing with JIT reader I experienced GDB to crash on null-pointer
+ dereference when stepping through non-jitted code.
+
+ The problem was that dwarf2_frame_find_fde () assumed that all objfiles
+ have BFD but that's not always true. To address this problem, this
+ commit skips such objfiles.
+
+ To test the fix we put breakpoint in jit_function_add (). The JIT reader
+ does not know how unwind this function so unwinding eventually falls
+ back to DWARF unwinder which in turn iterates over objfiles. Since the
+ the code is jitted, it is guaranteed it would eventually process JIT
+ objfile.
+
+ Approved-By: Simon Marchi <simon.marchi@efficios.com>
+
+2022-12-08 Alan Modra <amodra@gmail.com>
+
+ libctf: avoid potential double free
+ * ctf-link.c (ctf_link_add_cu_mapping): Set t NULL after free.
+
+2022-12-08 GDB Administrator <gdbadmin@sourceware.org>
+
+ Automatic date update in version.in
+
+2022-12-07 Peter Bergner <bergner@linux.ibm.com>
+
+ PowerPC: Add support for RFC02655 - Saturating Subtract Instruction
+ opcodes/
+ * ppc-opc.c (XOL): New define.
+ (XOL_MASK): Likewise.
+ (powerpc_opcodes): Add subfus, subfus., subwus, subwus., subdus, subdus.
+
+ gas/
+ * testsuite/gas/ppc/rfc02655.s: New test.
+ * testsuite/gas/ppc/rfc02655.d: Likewise
+ * testsuite/gas/ppc/future-raw.s: Likewise.
+ * testsuite/gas/ppc/future-raw.d: Likewise.
+ * testsuite/gas/ppc/ppc.exp: Run them.
+
+2022-12-07 Peter Bergner <bergner@linux.ibm.com>
+
+ PowerPC: Add support for RFC02656 - Enhanced Load Store with Length Instructions
+ opcodes/
+ * ppc-opc.c (PPCVSXF): New define.
+ (powerpc_opcodes): Add lxvrl, lxvrll, lxvprl, lxvprll, stxvrl,
+ stxvrll, stxvprl, stxvprl.
+
+ gas/
+ * testsuite/gas/ppc/rfc02656.s: New test.
+ * testsuite/gas/ppc/rfc02656.d: Likewise.
+ * testsuite/gas/ppc/ppc.exp: Run it.
+
+2022-12-07 Simon Marchi <simon.marchi@polymtl.ca>
+
+ gdb: add invalidate_selected_frame function
+ Instead of using `select_frame (nullptr)` to invalidate the selected
+ frame, introduce a function to do that. There is no change in behavior,
+ but it makes the intent a bit clearer. It also allows adding an assert
+ in select_frame that fi is not nullptr, so it avoids passing nullptr by
+ mistake.
+
+ Change-Id: I61643f46bc8eca428334513ebdaadab63997bdd0
+ Reviewed-By: Bruno Larsen <blarsen@redhat.com>
+
+2022-12-07 Tom de Vries <tdevries@suse.de>
+
+ [gdb/testsuite] Add KFAILs in gdb.base/longjmp.exp
+ Add KFAILs in test-case gdb.base/longjmp.exp for PR gdb/26967, covering
+ various ways that gdb is unable to recover the longjmp target if the libc
+ probe is not supported.
+
+ Tested on x86_64-linux.
+
+ Approved-By: Simon Marchi <simon.marchi@efficios.com>
+
+2022-12-07 Tom Tromey <tromey@adacore.com>
+
+ Remove unnecessary xstrdup from bppy_init
+ I saw that bppy_init used a non-const "char *". Fixing this revealed
+ that the xstrdup here was also unnecessary, so this patch removes it.
+
+2022-12-07 Alan Modra <amodra@gmail.com>
+
+ coff make_a_section_from_file tidy
+ Also support compressing a few more sections.
+
+ * coffgen.c (make_a_section_from_file): Rename return_section
+ to newsect. Don't try to be clever matching section name.
+ Compress .gnu.debuglto_.debug_ and .gnu.linkonce.wi. too.
+ Only rename debug sections when decompressing for linker.
+
+2022-12-07 Alan Modra <amodra@gmail.com>
+
+ gas compress_debug tidy
+ * write.c (compress_debug): Don't set up "ob" until after
+ seginfo NULL check. Simplify SEC_CONTENTS test. Localise
+ variables. Use bfd_debug_name_to_zdebug.
+
+ _bfd_elf_slurp_secondary_reloc_section sanity check
+ * elf.c (_bfd_elf_slurp_secondary_reloc_section): Sanity check
+ section header against file size. Avoid overflow in
+ reloc_count.
+
+ bfd_compress_section_contents access to elf_section_data
+ * compress.c (bfd_compress_section_contents): Don't access
+ elf_section_data for non-ELF.
+
+2022-12-07 Alan Modra <amodra@gmail.com>
+
+ Compression tidy and fixes
+ Tidies:
+ - Move stuff from bfd-in.h and libbfd.c to compress.c
+ - Delete COMPRESS_DEBUG from enum compressed_debug_section_type
+ - Move compress_debug field out of link_info to ld_config.
+ Fixes:
+ - Correct test in bfd_convert_section_setup to use obfd flags,
+ not ibfd.
+ - Apply bfd_applicable_file_flags to compression bfd flags added
+ by gas and ld to the output bfd.
+
+ bfd/
+ * bfd-in.h (enum compressed_debug_section_type),
+ (struct compressed_type_tuple),
+ (bfd_get_compression_algorithm),
+ (bfd_get_compression_algorithm_name),
+ * libbfd.c (compressed_debug_section_names),
+ (bfd_get_compression_algorithm),
+ (bfd_get_compression_algorithm_name): Move..
+ * compress.c: ..to here, deleting COMPRESS_DEBUG from
+ enum compressed_debug_section_type.
+ (bfd_convert_section_setup): Test obfd flags not ibfd for
+ compression flags.
+ * elf.c (elf_fake_sections): Replace link_info->compress_debug
+ test with abfd->flags test.
+ * bfd-in2.h: Regenerate.
+ binutils/
+ * objcopy.c (copy_file): Tidy setting of bfd compress flags.
+ Expand comment.
+ gas/
+ * write.c (compress_debug): Test bfd compress flags rather than
+ flag_compress_debug.
+ (write_object_file): Apply bfd_applicable_file_flags to compress
+ debug flags added to output bfd.
+ include/
+ * bfdlink.h (struct bfd_link_info): Delete compress_debug.
+ ld/
+ * ld.h (ld_config_type): Add compress_debug.
+ * emultempl/elf.em: Replace references to link_info.compress_debug
+ with config.compress_debug.
+ * lexsup.c (elf_static_list_options): Likewise.
+ * ldmain.c (main): Likewise. Apply bfd_applicable_file_flags
+ to compress debug flags added to output bfd.
+
+2022-12-07 GDB Administrator <gdbadmin@sourceware.org>
+
+ Automatic date update in version.in
+
+2022-12-06 H.J. Lu <hjl.tools@gmail.com>
+
+ bfd: Avoid signed overflow for new_size adjustment
+ When bfd_size_type is unsigned 64-bit integer and sizeof is unsigned
+ 32-bit integer, subtraction in
+
+ *new_size += sizeof (Elf32_External_Chdr) - sizeof (Elf64_External_Chdr);
+
+ will overflow. Use
+
+ *new_size -= sizeof (Elf64_External_Chdr) - sizeof (Elf32_External_Chdr);
+
+ to avoid overflow.
+
+ PR binutils/29860
+ * compress.c (bfd_convert_section_setup): Avoid signed overflow
+ for new_size adjustment.
+
+2022-12-06 Tom Tromey <tromey@adacore.com>
+
+ Cosmetic fix in ppc-sysv-tdep.c
+ This is just a couple of cosmetic fixes in ppc-sysv-tdep.c: fixing
+ some formatting and correcting a typo.
+
+ Fix operator precedence bug in Rust parser
+ PR rust/29859 points out an operator precedence bug in the Rust
+ parser. This patch fixes it and adds a regression test.
+
+2022-12-06 Nick Clifton <nickc@redhat.com>
+
+ Fix a dereference of NULL when scanning the symbol hashes array in the ARM linker.
+ PR 29852
+ * elf32-arm.c (cmse_scan): Check for NULL entries in the
+ sym_hashes array.
+ (elf32_arm_gc_mark_extra_sections): Likewise.
+
+2022-12-06 Tom de Vries <tdevries@suse.de>
+
+ [gdb/testsuite] Fix test names in gdb.base/longjmp.exp
+ When running test-case gdb.base/longjmp.exp, we have:
+ ...
+ PASS: gdb.base/longjmp.exp: next over setjmp (1)
+ ...
+ PASS: gdb.base/longjmp.exp: next over setjmp (2)
+ ...
+
+ The trailing " (1)" and " (2)" are interpreted as comments rather than parts
+ of the test name, and therefore this is a duplicate, which is currently not
+ detected by our duplicate detection mechanism (PR testsuite/29772).
+
+ Fix the duplicate by using with_test_prefix.
+
+ Tested on x86_64-linux.
+
+2022-12-06 Tom de Vries <tdevries@suse.de>
+
+ [gdb/testsuite] Make gdb.base/longjmp.exp FAIL more stable across archs
+ When running test-case gdb.base/longjmp.exp on x86_64-linux, the master
+ longjmp breakpoint is set using probes and the test-case passes:
+ ...
+ (gdb) PASS: gdb.base/longjmp.exp: next to longjmp (1)
+ next^M
+ 0x00000000004005cc 49 if (setjmp (env) == 0) /* patt1 */^M
+ (gdb) PASS: gdb.base/longjmp.exp: next over longjmp(1)
+ next^M
+ 56 resumes++;^M
+ (gdb) PASS: gdb.base/longjmp.exp: next into else block (1)
+ ...
+
+ However, if I disable
+ create_longjmp_master_breakpoint_probe, we have instead:
+ ...
+ (gdb) PASS: gdb.base/longjmp.exp: next to longjmp (1)
+ next^M
+ 56 resumes++;^M
+ (gdb) FAIL: gdb.base/longjmp.exp: next over longjmp(1)
+ ...
+
+ At first glance, the failure mode doesn't look too bad: we stop
+ a few insns later than the passing scenario.
+
+ For contrast, if we do the same on powerpc64le, the failure mode is:
+ ...
+ (gdb) PASS: gdb.base/longjmp.exp: next to longjmp (1)
+ next^M
+ ^M
+ Breakpoint 3, main () at longjmp.c:59^M
+ 59 i = 1; /* miss_step_1 */^M
+ (gdb) FAIL: gdb.base/longjmp.exp: next over longjmp(1)
+ ...
+ Here we only stop because of running into the safety net breakpoint at
+ miss_step_1.
+
+ So, how does this happen on x86_64? Let's look at the code:
+ ...
+ 4005c7: e8 94 fe ff ff call 400460 <_setjmp@plt>
+ 4005cc: 85 c0 test %eax,%eax
+ 4005ce: 75 1e jne 4005ee <main+0x3b>
+ 4005d0: 8b 05 8e 0a 20 00 mov 0x200a8e(%rip),%eax # 601064 <longjmps>
+ 4005d6: 83 c0 01 add $0x1,%eax
+ 4005d9: 89 05 85 0a 20 00 mov %eax,0x200a85(%rip) # 601064 <longjmps>
+ 4005df: be 01 00 00 00 mov $0x1,%esi
+ 4005e4: bf 80 10 60 00 mov $0x601080,%edi
+ 4005e9: e8 82 fe ff ff call 400470 <longjmp@plt>
+ 4005ee: 8b 05 74 0a 20 00 mov 0x200a74(%rip),%eax # 601068 <resumes>
+ ...
+ The next over the longjmp call at 4005e9 is supposed to stop at the longjmp
+ target at 4005cc, but instead we stop at 4005ee, where we have the step-resume
+ breakpoint inserted by the next. In other words, we accidentally "return"
+ from the longjmp call to the insn immediately after it (even though
+ a longjmp is a noreturn function).
+
+ Try to avoid this accident and make the failure mode on x86_64 the same as on
+ powerpc64le, by switching the then and else branch.
+
+ Tested on x86_64-linux.
+
+2022-12-06 Xiao Zeng <zengxiao@eswincomputing.com>
+
+ gdb/riscv: correct dwarf to gdb register number mapping
+ According to the riscv psabi, the mapping relationship between the
+ DWARF registers and the machine registers is as follows:
+
+ DWARF Number | Register Name | Description
+ 0 - 31 | x0 - x31 | Integer Registers
+ 32 - 63 | f0 - f31 | Floating-point Registers
+
+ This is not modelled quite right in riscv_dwarf_reg_to_regnum, the
+ DWARF register numbers 31 and 63 are not handled correctly due to a
+ use of '<' instead of '<='. This commit fixes this issue.
+
+2022-12-06 Haochen Jiang <haochen.jiang@intel.com>
+
+ x86: Remove unnecessary vex.w check for xh_mode in disassembler
+ For all the xh_mode usage in table, they are all using %XH, which will
+ print "{bad}" while EVEX.W=1. This makes this vex.w check unnecessary.
+
+ opcodes/ChangeLog:
+
+ * i386-dis.c (OP_E_memory): Remove vex.w check for xh_mode.
+
+2022-12-06 Alan Modra <amodra@gmail.com>
+
+ Get rid of SEC_ELF_COMPRESS
+ This flag also isn't needed, except for some sanity checks which we
+ can omit.
+
+ * elf.c (elf_fake_sections): Don't set SEC_ELF_COMPRESS for
+ compressed debug sections, just leave sh_name as -1.
+ (assign_file_positions_for_non_load_sections),
+ (assign_file_positions_except_relocs): Decide whether a section
+ needs compressing and thus should not have its file offset set
+ by looking at sh_name.
+ (_bfd_elf_assign_file_positions_for_non_load): Similarly decide
+ which sections need compressing.
+ * elflink.c (bfd_elf_final_link): Don't test SEC_ELF_COMPRESS.
+ * merge.c (_bfd_write_merged_section): Likewise.
+ * section.c (SEC_ELF_COMPRESS): Don't define.
+ (SEC_ELF_PURECODE): Renumber.
+ * bfd-in2.h: Regenerate.
+
+2022-12-06 Alan Modra <amodra@gmail.com>
+
+ Get rid of SEC_ELF_RENAME
+ SEC_ELF_RENAME is a flag used to effect section name changes when
+ compressing/decompressing zlib-gnu debug sections. This can be
+ accomplished more directly in one of the objcopy specific bfd
+ functions. Renaming for ld input is simplified too. Ld input object
+ files always have BFD_DECOMPRESS set.
+
+ bfd/
+ * compress.c (bfd_convert_section_size): Rename to..
+ (bfd_convert_section_setup): ..this. Handle objcopy renaming
+ of compressed/decompressed debug sections.
+ * elf.c (_bfd_elf_make_section_from_shdr): Only rename zdebug
+ input for linker.
+ (elf_fake_sections): Don't handle renaming of debug sections for
+ objcopy here.
+ * section.c (SEC_ELF_RENAME): Delete.
+ * bfd-in2.h: Regenerate.
+ binutils/
+ * objcopy.c (setup_section): Call bfd_convert_section_setup.
+ Don't call bfd_convert_section_size.
+
+2022-12-06 Alan Modra <amodra@gmail.com>
+
+ Compression header enum
+ Define an enum instead of using ELFCOMPRESS_ZLIB and ELFCOMPRESS_ZSTD
+ in bfd and binutils, and move some functions from bfd.c to compress.c.
+ When looking at the COFF/PE debug compression support, I wondered
+ about extending it to support zstd. I likely won't do that, but
+ the compression header ch_type field isn't just ELF specific if these
+ headers are to be used in COFF/PE too.
+
+ bfd/
+ * bfd.c (bfd_update_compression_header),
+ (bfd_check_compression_header, bfd_get_compression_header_size),
+ (bfd_convert_section_size, bfd_convert_section_contents): Move to..
+ * compress.c: ..here.
+ (enum compression_type): New. Use it throughout file.
+ * elf.c (_bfd_elf_make_section_from_shdr): Replace uses of
+ ELFCOMPRESS_ZLIB and ELFCOMPRESS_ZSTD with ch_compress_zlib and
+ ch_compress_zstd.
+ * bfd-in2.h: Regenerate.
+ binutils/
+ * readelf.c (process_section_headers, dump_section_as_strings),
+ (dump_section_as_bytes, load_specific_debug_section): Replace
+ uses of ELFCOMPRESS_ZLIB and ELFCOMPRESS_ZSTD with
+ ch_compress_zlib and ch_compress_zstd.
+
+2022-12-06 mengqinggang <mengqinggang@loongson.cn>
+
+ LoongArch: Fix dynamic reloc not generated bug in some cases.
+ bfd/ChangeLog:
+
+ * elfnn-loongarch.c (loongarch_elf_relocate_section): Likewise.
+
+2022-12-06 Alan Modra <amodra@gmail.com>
+
+ PR29855, ch_type in bfd_init_section_decompress_status can be uninitialized
+ PR 29855
+ * compress.c (bfd_init_section_decompress_status): Set ch_type
+ to zero for zlib-gnu case.
+
+2022-12-06 GDB Administrator <gdbadmin@sourceware.org>
+
+ Automatic date update in version.in
+
+2022-12-05 Simon Marchi <simon.marchi@polymtl.ca>
+
+ gdb/linux-nat: add ptid parameter to linux_xfer_siginfo
+ Make the inferior_ptid bubble up to linux_nat_target::xfer_partial.
+
+ Change-Id: I62dbc5734c26648bb465f449c2003c73751cd812
+
+2022-12-05 Simon Marchi <simon.marchi@polymtl.ca>
+
+ gdb/linux-nat: use l linux_nat_get_siginfo in linux_xfer_siginfo
+ I noticed we could reduce duplication a bit here.
+
+ Change-Id: If24e54d1dac71b46f7c1f68a18a073d4c084b644
+
+2022-12-05 Simon Marchi <simon.marchi@polymtl.ca>
+
+ gdb/linux-nat: check ptrace return value in linux_nat_get_siginfo
+ Not a big deal, but it seems strange to check errno instead of the
+ ptrace return value to know whether it succeeded.
+
+ Change-Id: If0a6d0280ab0e5ecb077e546af0d6fe489c5b9fd
+
+2022-12-05 Simon Marchi <simon.marchi@polymtl.ca>
+
+ gdb/linux-nat: don't memset siginfo on failure in linux_nat_get_siginfo
+ No caller cares about the value of *SIGINFO on failure. It's also
+ documented in the function doc that *SIGINFO is uninitialized (I
+ understand "untouched") on failure.
+
+ Change-Id: I5ef38a5f58e3635e109b919ddf6f827f38f1225a
+
+2022-12-05 Simon Marchi <simon.marchi@polymtl.ca>
+
+ gdb/linux-nat: bool-ify linux_nat_get_siginfo
+ Change return type to bool.
+
+ Change-Id: I1bf0360bfdd1b5994cd0f96c268d806f96fe51a4
+
+2022-12-05 Simon Marchi <simon.marchi@polymtl.ca>
+
+ gdb/linux-nat: use get_ptrace_pid in two spots
+ No behavior change expected.
+
+ Change-Id: Ifaa64ecd619483646b024fd7c62e571e92a8eedb
+
+2022-12-05 Simon Marchi <simon.marchi@efficios.com>
+
+ gdb/testsuite: remove perror calls when failing to run
+ I noticed that when running these two tests in sequence:
+
+ Running /home/smarchi/src/binutils-gdb/gdb/testsuite/gdb.ada/arrayptr.exp ...
+ ERROR: GDB process no longer exists
+ ERROR: Couldn't run foo-all
+ Running /home/smarchi/src/binutils-gdb/gdb/testsuite/gdb.ada/assign_1.exp ...
+
+ The results in gdb.sum are:
+
+ Running /home/smarchi/src/binutils-gdb/gdb/testsuite/gdb.ada/arrayptr.exp ...
+ PASS: gdb.ada/arrayptr.exp: scenario=all: compilation foo.adb
+ ERROR: GDB process no longer exists
+ UNRESOLVED: gdb.ada/arrayptr.exp: scenario=all: gdb_breakpoint: set breakpoint at foo.adb:40 (eof)
+ ERROR: Couldn't run foo-all
+ Running /home/smarchi/src/binutils-gdb/gdb/testsuite/gdb.ada/assign_1.exp ...
+ UNRESOLVED: gdb.ada/assign_1.exp: changing the language to ada
+ PASS: gdb.ada/assign_1.exp: set convenience variable $xxx to 1
+
+ The UNRESOLVED for arrayptr.exp is fine, as GDB crashes in that test,
+ while trying to run to main. However, the UNRESOLVED in assign_1.exp
+ doesn't make sense, GDB behaves as expected in that test:
+
+ (gdb) set lang ada^M
+ (gdb) UNRESOLVED: gdb.ada/assign_1.exp: changing the language to ada
+ print $xxx := 1^M
+ $1 = 1^M
+ (gdb) PASS: gdb.ada/assign_1.exp: set convenience variable $xxx to 1
+
+ The problem is that arrayptr.exp calls perror when failing to run to
+ main, then returns. perror makes it so that the next test (as in
+ pass/fail) will be recorded as UNRESOLVED. However, here, the next test
+ (as in pass/fail) is in the next test (as in .exp). Hence the spurious
+ UNRESOLVED in assign_1.exp.
+
+ These perror when failing to run to X are not really useful, especially
+ since runto records a FAIL on error, by default. Remove all the
+ perrors on runto failure I could find.
+
+ When there wasn't one already, add a return statement when failing to
+ run, to avoid running the test of the test unnecessarily.
+
+ I thought of adding a check ran between test (in gdb_finish
+ probably) where we would emit a warning if errcnt > 0, meaning a test
+ quit and left a perror "active". However, reading that variable would
+ poke into the DejaGNU internals, not sure it's a good idea.
+
+ Change-Id: I2203df6d06e199540b36f56470d1c5f1dc988f7b
+
+2022-12-05 Luis Machado <luis.machado@arm.com>
+
+ Add missing newline to gdbarch_tdep debugging output
+ The missing newline causes testsuite issues because the gdb prompt gets output
+ to an unexpected location.
+
+2022-12-05 Nick Clifton <nickc@redhat.com>
+
+ Prevent an illegal memory access when comparing the prefix of a section name regexp.
+ PR 29849
+ * ldlang.c (spec_match): Check that there is sufficient length in
+ the target name to match the spec's prefix.
+
+2022-12-05 Martin Liska <mliska@suse.cz>
+
+ testsuite: support mold linker
+ Mold linker demotes symbols like main to be local and the patch
+ adjusts expected output from nm.
+
+ Moreover, simplify the regex patterns.
+
+2022-12-05 Thiago Jung Bauermann <thiago.bauermann@linaro.org>
+
+ gdbarch.py: Fix indentation in the generated set_gdbarch_* definitions
+ Use as many tabs as possible for indentation and pad with spaces to keep
+ the argument aligned to the opening parenthesis in the line above.
+
+ Co-developed-by: Simon Marchi <simon.marchi@efficios.com>
+ Approved-By: Simon Marchi <simon.marchi@efficios.com>
+
+2022-12-05 Thiago Jung Bauermann <thiago.bauermann@linaro.org>
+
+ gdbarch.py: Fix indentation in the generated gdbarch_dump function
+ Use tab for the first eight spaces of indentation, and align the gdb_printf
+ arguments to the open parenthesis of the function call.
+
+ Approved-By: Simon Marchi <simon.marchi@efficios.com>
+
+2022-12-05 Thiago Jung Bauermann <thiago.bauermann@linaro.org>
+
+ gdb: Update my email address in MAINTAINERS
+
+2022-12-05 Jan Beulich <jbeulich@suse.com>
+
+ gas: add Dwarf line number test for .macro expansions
+ Before fiddling with the code let's put in place a test covering what
+ PR/gas 16908 aimed at.
+
+ gas: squash (some) .linefile from listings
+ Not so long ago we started to insert these artificially when expanding
+ certain macro-like constructs; zap them as cluttering what actually
+ results from user input.
+
+2022-12-05 Jan Beulich <jbeulich@suse.com>
+
+ gas: avoid inserting extra newline in buffer_and_nest()
+ In "-alm" listings I've noticed an odd blank line following the inserted
+ .linefile one. This results from the explicit NL inserted being
+ redundant with the one left in place from the original input line by all
+ respective callers. Note that we need to compensate for the removed line
+ by bumping the directive argument (which in turn is decremented again in
+ s_linefile() before calling new_logical_line_flags(), and I have to
+ confess that when putting together the original change I was a little
+ puzzled by the imbalance of increments/decrements, but then I forgot to
+ actually go look for the cause).
+
+ While there also switch to sb_add_string() instead of effectively open-
+ coding it to some degree.
+
+2022-12-05 Jan Beulich <jbeulich@suse.com>
+
+ Arm: .noinit and .persistent are not supported for Linux targets
+ Respective tests being run means guaranteed failures.
+
+2022-12-05 Nick Clifton <nickc@redhat.com>
+
+ Fix an illegal memory access when parsing a corrupt VMS Alpha file.
+ PR 29848
+ * vms-alpha.c (parse_module): Fix potential out of bounds memory
+ access.
+
+2022-12-05 Andrew Burgess <aburgess@redhat.com>
+
+ libopcodes/mips: add support for disassembler styling
+ This commit adds disassembler styling support for MIPS. After this
+ commit objdump and GDB will style disassembler output.
+
+ This is a pretty straight forward change, we switch to use the
+ disassemble_info::fprintf_styled_func callback, and pass an
+ appropriate style through as needed. No additional tricks were
+ needed (compared to say i386, or ARM).
+
+ Tested by running all of the objdump commands used by the gas
+ testsuite and manually inspecting the styled output, everything looks
+ reasonable, though I'm not a MIPS expert, so it is possible that I've
+ missed some corner cases. Worst case though is that something will be
+ styled incorrectly, the actual content should be unchanged.
+
+ All the gas, ld, and binutils tests still pass for me.
+
+2022-12-05 Andrew Burgess <aburgess@redhat.com>
+
+ opcodes/mips: use .word/.short for undefined instructions
+ While working on disassembler styling for MIPS, I noticed that
+ undefined instructions are printed by the disassembler as raw number
+ with no assembler directive prefix (e.g. without .word or .short).
+
+ I think adding something like .word, or .short, helps to make it
+ clearer the size of the value that is being displayed, and is inline
+ with what many of the other libopcode disassemblers do.
+
+ In this commit I've added the .word and .short directives, and updated
+ all the tests that I spotted that failed as a result.
+
+2022-12-05 Alan Modra <amodra@gmail.com>
+
+ Re: Renaming .debug to .zdebug and vice versa
+ * compress.c (bfd_debug_name_to_zdebug): Fix C++ compile error.
+ (bfd_zdebug_name_to_debug): Likewise.
+ * bfd-in2.h: Regenerate.
+
+2022-12-05 GDB Administrator <gdbadmin@sourceware.org>
+
+ Automatic date update in version.in
+
+2022-12-04 Alan Modra <amodra@gmail.com>
+
+ PR29846, segmentation fault in objdump.c compare_symbols
+ Fixes a fuzzed object file problem where plt relocs were manipulated
+ in such a way that two synthetic symbols were generated at the same
+ plt location. Won't occur in real object files.
+
+ PR 29846
+ PR 20337
+ * objdump.c (compare_symbols): Test symbol flags to exclude
+ section and synthetic symbols before attempting to check flavour.
+
+2022-12-04 Alan Modra <amodra@gmail.com>
+
+ COFF compressed debug support
+ Since commit 4bea06d73c04 COFF support for compressed debug sections
+ has been broken due to the "flags" variable not getting SEC_HAS_CONTENTS.
+
+ * coffgen.c (make_a_section_from_file): Correct section flags
+ handling. Delete extraneous condition. Update error messages
+ to be the same as in elf.c.
+
+2022-12-04 Alan Modra <amodra@gmail.com>
+
+ Renaming .debug to .zdebug and vice versa
+ Move a couple of elf.c functions to compress.c.
+
+ * compress.c (bfd_debug_name_to_zdebug): New inline function.
+ (bfd_zdebug_name_to_debug): Likewise.
+ * elf.c (convert_debug_to_zdebug, convert_zdebug_to_debug): Delete.
+ (_bfd_elf_make_section_from_shdr, elf_fake_sections),
+ (_bfd_elf_assign_file_positions_for_non_load): Adjust to suit.
+ * coffgen.c (make_a_section_from_file): Use new inlines here.
+
+2022-12-04 GDB Administrator <gdbadmin@sourceware.org>
+
+ Automatic date update in version.in
+
+2022-12-03 H.J. Lu <hjl.tools@gmail.com>
+
+ Revert "ld: Add .note.GNU-stack to ld-plugin/dummy.s"
+ This reverts commit 44e59b5a7d8a874f6546a1471b8a003911853aa0.
+
+ It works only for ELF targets.
+
+2022-12-03 H.J. Lu <hjl.tools@gmail.com>
+
+ ld: Add .note.GNU-stack to ld-plugin/dummy.s
+ * testsuite/ld-plugin/dummy.s: Add .note.GNU-stack.
+
+2022-12-03 H.J. Lu <hjl.tools@gmail.com>
+
+ x86: Allow 16-bit register source for LAR and LSL
+ Since LAR and LSL only access 16 bits of the source operand, regardless
+ of operand size, allow 16-bit register source for LAR and LSL, and always
+ disassemble LAR and LSL with 16-bit source operand.
+
+ gas/
+
+ PR gas/29844
+ * testsuite/gas/i386/i386.s: Add tests for LAR and LSL.
+ * testsuite/gas/i386/x86_64.s: Likewise.
+ * testsuite/gas/i386/intelbad.s: Remove "lar/lsl eax, ax".
+ * testsuite/gas/i386/i386-intel.d: Updated.
+ * testsuite/gas/i386/i386.d: Likewise.
+ * testsuite/gas/i386/intel-intel.d: Likewise.
+ * testsuite/gas/i386/intel.d: Likewise.
+ * testsuite/gas/i386/intelbad.l: Likewise.
+ * testsuite/gas/i386/x86_64-intel.d: Likewise.
+ * testsuite/gas/i386/x86_64.d: Likewise.
+
+ opcodes/
+
+ PR gas/29844
+ * i386-dis.c (MOD_0F02): Removed.
+ (MOD_0F03): Likewise.
+ (dis386_twobyte): Restore larS and lslS.
+ (mod_table): Remove MOD_0F02 and MOD_0F03.
+ * i386-opc.tbl: Allow 16-bit register source for LAR and LSL.
+ * i386-tbl.h: Regenerated.
+
+2022-12-03 GDB Administrator <gdbadmin@sourceware.org>
+
+ Automatic date update in version.in
+
+2022-12-02 Simon Marchi <simon.marchi@polymtl.ca>
+
+ gdb/linux-nat: add pid parameter to linux_proc_xfer_memory_partial
+ Add a pid parameter to linux_proc_xfer_memory_partial, making the
+ inferior_ptid reference bubble up close to the target_ops::xfer_partial
+ boundary. No behavior change expected.
+
+ Change-Id: I58171b00ee1bba1ea22efdbb5dcab8b1ab3aac4c
+
+2022-12-02 Simon Marchi <simon.marchi@efficios.com>
+
+ gdb: add some debug statements to solib-svr4.c
+ Add a few debug statements that were useful to me when debugging why the
+ glibc probes interface wasn't getting used.
+
+ Change-Id: Ic20744f9fc80a90f196896b0829949411620c540
+
+2022-12-02 Simon Marchi <simon.marchi@polymtl.ca>
+
+ gdb: merge solib-frv aix-solib debug options into "set/show debug solib"
+ solib implementations are typically used one at a time. So it will be
+ rare that you will want to enable debug for one solib kind, and
+ absolutely want to keep the others disabled. To make things simpler,
+ instead of adding separate variables / macros / commands for each solib
+ implementation, merge the existing ones (frv and aix) into a unified
+ "set/show debug solib", with the solib_debug_printf macro.
+
+ Change-Id: I6e18bbc7401724f37ae66681badb079d75ecf7fa
+
+2022-12-02 Nick Clifton <nickc@redhat.com>
+
+ Add Jan Beulich as an x86_64 maintainer.
+
+2022-12-02 Jan Beulich <jbeulich@suse.com>
+
+ x86: drop most OPERAND_TYPE_* (and rework the rest)
+ With the general use of C99 there's no need anymore to have i386-gen
+ produce these. For more frequently used ones introduce local #define-s,
+ while others are simply spelled out directly. While doing this move
+ some static constants into more narrow scopes.
+
+ Note that as a "side effect" this corrects type_names[]'es imm8s entry.
+
+2022-12-02 Jan Beulich <jbeulich@suse.com>
+
+ x86: simplify and slightly correct XCHG vs NOP checking
+ For one, because of CheckRegSize, there's no need to check the size of
+ both (register) operands. And then in process_suffix() check opcode
+ space rather than the (potentially ambiguous) extension opcode.
+
+ x86: also use D for XCHG and TEST
+ Leverage the C (commutative) attribute to also reduce the number of XCHG
+ and TEST templates we have. This way the reg <-> r/m (and reg <-> reg for
+ XCHG) forms can also be folded into a single template each, utilizing D.
+
+2022-12-02 Tom de Vries <tdevries@suse.de>
+
+ [gdb/testsuite] Prevent timeout in gdb.ada/float-bits.exp
+ Recent commit 32a5aa26256 ("[gdb/testsuite] Fix gdb.ada/float-bits.exp
+ for powerpc64le") started using command "maint print architecture", which
+ produces ~275 lines.
+
+ Rewrite the corresponding gdb_test_multiple to read line-by-line, to prevent
+ timeouts on slower test setups.
+
+ Note that this doesn't fix a timeout in the test-case on aarch64 due to:
+ ...
+ gdbarch_dump: read_core_file_mappings = <0x817438>
+ (gdb) aarch64_dump_tdep: Lowest pc = 0x0x8000
+ ...
+
+ Tested on x86_64-linux.
+
+2022-12-02 GDB Administrator <gdbadmin@sourceware.org>
+
+ Automatic date update in version.in
+
+2022-12-01 Carl Love <cel@us.ibm.com>
+
+ PowerPC, fix gdb.reverse/finish-reverse-bkpt.exp and gdb.reverse/next-reverse-bkpt-over-sr.exp
+ The tests set a break point with the command break *func. This sets a
+ breakpoint on the first instruction of the function. PowerPC uses
+ Global Entry Points (GEP) and Local Entry Points (LEP). The first
+ instruction in the function is the GEP. The GEP sets up register
+ r2 before reaching the LEP. When the function is called with func() the
+ function is entered via the LEP and the test fails because GDB does not
+ see the breakpoint on the GEP. However, if the function is called via a
+ function pointer, execution begins at the GEP as the test expects.
+
+ Currently finish-reverse-bkpt.exp uses source file finish-reverse.c and
+ next-reverse-bpkt-over-sr.exp uses source file step-reverse.c A new
+ source file was created for tests finish-reverse-bkpt.exp and
+ next-reverse-bkpt-over-sr.exp. The new files use the new function
+ pointer method to call the functions so the tests will work correctly on
+ both PowerPC with a GEP and LEP as well as on other systems. The GEP is
+ the same as the LEP on non PowerPC systems.
+
+ The expect files were changed to use the new source files and to set the
+ initial break point for the rest of the test on the function pointer call
+ for the function.
+
+ This patch fixes two PowerPC test failures in each of the tests
+ gdb.reverse/finish-reverse-bkpt.exp and
+ gdb.reverse/next-reverse-bkpt-over-sr.exp.
+
+ Patch tested on PowerPC and Intel X86-64 with no regressions.
+
+ Reviewed-By: Bruno Larsen <blarsen@redhat.com>
+
+2022-12-01 Tom Tromey <tromey@adacore.com>
+
+ Remove call to registers_changed from windows-nat.c
+ I noticed that windows_nat_target::interrupt calls registers_changed.
+ However, I don't think there's any reason to do this, because this
+ will happen automatically when the inferior stop is processed.
+
+ Approved-By: Simon Marchi <simon.marchi@efficios.com>
+
+2022-12-01 Tom Tromey <tromey@adacore.com>
+
+ Remove the_windows_nat_target global
+ I belatedly realized that the "the_windows_nat_target" global isn't
+ really necessary. It's only used in one place, where 'this' would be
+ simpler and clearer. This patch removes the global entirely.
+
+ Approved-By: Simon Marchi <simon.marchi@efficios.com>
+
+2022-12-01 Simon Marchi <simon.marchi@polymtl.ca>
+
+ gdb: make frame_register static
+ It is only used inside frame.c.
+
+ Change-Id: I44eb46a5992412f8f8b4954b2284b0ef3b549504
+
+2022-12-01 Tom Tromey <tromey@adacore.com>
+
+ Add name canonicalization for C
+ PR symtab/29105 shows a number of situations where symbol lookup can
+ result in the expansion of too many CUs.
+
+ What happens is that lookup_signed_typename will try to look up a type
+ like "signed int". In cooked_index_functions::expand_symtabs_matching,
+ when looping over languages, the C++ case will canonicalize this type
+ name to be "int" instead. Then this method will proceed to expand
+ every CU that has an entry for "int" -- i.e., nearly all of them. A
+ crucial component of this is that the caller, objfile::lookup_symbol,
+ does not do this canonicalization, so when it tries to find the symbol
+ for "signed int", it fails -- causing the loop to continue.
+
+ This patch fixes the problem by introducing name canonicalization for
+ C. The idea here is that, by making C and C++ agree on the canonical
+ name when a symbol name can have multiple spellings, we avoid the bad
+ behavior in objfile::lookup_symbol (and any other such code -- I don't
+ know if there is any).
+
+ Unlike C++, C only has a few situations where canonicalization is
+ needed. And, in particular, due to the lack of overloading (thus
+ avoiding any issues in linespec) and due to the way c-exp.y works, I
+ think that no canonicalization is needed during symbol lookup -- only
+ during symtab construction. This explains why lookup_name_info is not
+ touched.
+
+ The stabs reader is modified on a "best effort" basis.
+
+ The DWARF reader needed one small tweak in dwarf2_name to avoid a
+ regression in dw2-unusual-field-names.exp. I think this is adequately
+ explained by the comment, but basically this is a scenario that should
+ not occur in real code, only the gdb test suite.
+
+ lookup_signed_typename is simplified. It used to search for two
+ different type names, but now gdb can search just for the canonical
+ form.
+
+ gdb.dwarf2/enum-type.exp needed a small tweak, because the
+ canonicalizer turns "unsigned integer" into "unsigned int integer".
+ It seems better here to use the correct C type name.
+
+ Bug: https://sourceware.org/bugzilla/show_bug.cgi?id=29105
+ Tested-by: Simon Marchi <simark@simark.ca>
+ Reviewed-by: Andrew Burgess <aburgess@redhat.com>
+
+2022-12-01 Tom Tromey <tromey@adacore.com>
+
+ Refactor cooked_index::do_finalize
+ This refactors cooked_index::do_finalize, reordering an 'if' to make
+ it a little less redundant. This change makes a subsequent patch
+ easier to read.
+
+ Reviewed-by: Andrew Burgess <aburgess@redhat.com>
+
+2022-12-01 Tom Tromey <tromey@adacore.com>
+
+ Remove language check from dwarf2_compute_name
+ dwarf2_compute_name has a redundant check of the CU's language -- this
+ is also checked in dwarf2_canonicalize_name. Removing this slightly
+ simplifies a future patch.
+
+ Reviewed-by: Andrew Burgess <aburgess@redhat.com>
+
+2022-12-01 Simon Marchi <simon.marchi@efficios.com>
+
+ gdb/dwarf: add some QUIT macros
+ While testing the fix for PR 29105, I noticed I couldn't ctrl-C my way
+ out of GDB expanding many symtabs. GDB was busy in a loop in
+ cooked_index_functions::expand_symtabs_matching. Add a QUIT there. I
+ also happened to see a spot in
+ cooked_index_functions::expand_matching_symbols where a QUIT would be
+ useful too, since we iterate over a potentially big number of index
+ entries and expand CUs in the loop. Add one there too.
+
+ Change-Id: Ie1d650381df7f944c16d841b3e592d2dce7306c3
+ Approved-By: Kevin Buettner <kevinb@redhat.com>
+
+2022-12-01 Simon Marchi <simon.marchi@efficios.com>
+
+ gdb: remove prune_threads in thread_db_target::update_thread_list
+ Pedro mentioned that this prune_threads call in
+ thread_db_target::update_thread_list was not needed, and it was probably
+ an oversight to leave it there in the work following commit e8032dde10b
+ ("Push pruning old threads down to the target"). That commit changed
+ the "find new threads" target operation to "update thread list", making
+ the target responsible of adding new threads and removing exited
+ threads, rather than just adding new threads. Commit e8032dde10b moved
+ the prune_threads calls previously done in common code into each
+ target's update_thread_list method, in order to keep the existing
+ behavior, which is why this prune_threads call ended up there.
+
+ In the mean time, the linux-nat target was taught to update_thread_list,
+ and thread_db_target::update_thread_list defers to that for any live
+ inferior, so the prune_threads call is not needed there. Otherwise, the
+ thread_db_target::update_thread_list implementation based on
+ td_ta_thr_iter_p only knows how to add new threads, not how to delete
+ exited threads, but that is only used for non-live inferiors, where
+ threads can't exit anyway. So the prune_threads call is not needed for
+ that case either.
+
+ Change-Id: I127fd4f84c25086f97853dadf34c5cec6816840d
+ Approved-By: Pedro Alves <pedro@palves.net>
+
+2022-12-01 H.J. Lu <hjl.tools@gmail.com>
+
+ opcodes: Remove i386-init.h and i386-tbl.h from HFILES
+ i386-init.h and i386-tbl.h are generated files. There is nothing to
+ translate. Remove them from HFILES (POTFILES).
+
+ * Makefile.am (HFILES): Remove i386-init.h and i386-tbl.h.
+ * Makefile.in: Regenerated.
+ * po/POTFILES.in: Likewise.
+
+2022-12-01 Tom Tromey <tromey@adacore.com>
+
+ Avoid timeouts in gdb.compile
+ PR compile/29541 points out that some of the C++ tests in gdb.compile
+ will time out when the glibc debuginfo is installed. This was
+ interfering with my hacking on gdb by making test runs extremely long,
+ so I looked into it.
+
+ Internally the bug seems to be that gdb tries to convert multiple
+ symbols named "var" via the compiler interface; one such symbol (I
+ didn't track it down too far) causes the C++ compiler plugin to crash.
+
+ Unfortunately, the crash is reported as a timeout, as the gdb side of
+ the plugin simply hangs. This seems like a bug in the plugin RPC
+ mechanism and, worse, apparently when I wrote this stuff I didn't
+ really consider error reporting very much at all, so gdb can't really
+ detect failures in the first place.
+
+ Anyway... this patch works around the timeout by compiling a simple
+ test that should provoke this bug, and then using "untested" if it
+ notices a GCC crash.
+
+ Bug: https://sourceware.org/bugzilla/show_bug.cgi?id=29541
+
+2022-12-01 Tom Tromey <tromey@adacore.com>
+
+ Remove obsolete check from skip_compile_feature_tests
+ skip_compile_feature_tests checks for "Command not supported on this
+ host", but this error was removed by commit e8d8cce6 ("Import mkdtemp
+ gnulib module, fix mingw build"). This patch removes the obsolete
+ test.
+
+ Remove one copy of skip_compile_feature_tests
+ I noticed that there are two identical copies of
+ skip_compile_feature_tests in the test suite. This removes one from
+ gdb.exp, in favor of the one in compile-support.exp.
+
+2022-12-01 Clément Chigot <chigot@adacore.com>
+
+ binutils: improve holes detection in .debug_loclists.
+ The previous warnings about holes in .debug_loclists sections don't
+ take into account the headers of each CU and could include the locviews
+ if they precede the loclist.
+
+ The following warning can be triggered between two CU.
+ ... <previous CU views> ...
+ 0000001d <End of list>
+
+ 0000002a v000000000000000 v000000000000000 location view pair
+ 0000002c v000000000000000 v000000000000000 location view pair
+
+ readelf: Warning: There is a hole [0x1e - 0x2e] in .debug_loclists section.
+ 0000002e v000000000000000 v000000000000000 views at 0000002a for:
+ ...
+
+ But [0x1e - 0x2a] corresponds to the CU header and [0x2a - 0x2e] are
+ the locviews. Thus there is no hole here.
+
+ binutils/ChangeLog:
+
+ * dwarf.c (display_debug_loc): Adjust holes detections for
+ headers and locviews.
+
+2022-12-01 Nick Clifton <nickc@redhat.com>
+
+ Fix verilog output when the width is > 1.
+ PR 25202
+ bfd * bfd.c (VerilogDataEndianness): New variable.
+ (verilog_write_record): Use VerilogDataEndianness, if set, to
+ choose the endianness of the output.
+ (verilog_write_section): Adjust the address by the data width.
+
+ binutils* objcopy.c (copy_object): Set VerilogDataEndianness to the
+ endianness of the input file.
+ (copy_main): Verifiy the value set by the --verilog-data-width
+ option.
+ * testsuite/binutils-all/objcopy.exp: Add tests of the new behaviour.
+ * testsuite/binutils-all/verilog-I4.hex: New file.
+
+2022-12-01 Jan Beulich <jbeulich@suse.com>
+
+ x86: rework of match_template()'s suffix checking
+ (Ab)using i386_opcode_modifier for this has been overkill, as the logic
+ doesn't really require the full structure. With the removal of
+ LONG_DOUBLE_MNEM_SUFFIX and No_ldSuf there's no good reason at all
+ anymore to pull out such a loop invariant: We're dealing a check of a
+ bit in the loop for a simple comparison. Do the original compares inside
+ the loop, thus also making it easier to understand what is actually
+ being checked.
+
+ x86: drop No_ldSuf
+ With LONG_DOUBLE_MNEM_SUFFIX gone there'salso no use for No_ldSuf
+ anymore.
+
+ x86/Intel: drop LONG_DOUBLE_MNEM_SUFFIX
+ With the removal of its use for FPU insns the suffix is now finally
+ properly misnamed. Drop its use altogether, replacing it by a separate
+ boolean instead.
+
+ x86/Intel: restrict use of LONG_DOUBLE_MNEM_SUFFIX
+ As a comment near the top of match_template() already says: We really
+ only need this pseudo-suffix for far branch handling. Stop "deriving" it
+ for floating point insns. (Don't bother renaming the now properly
+ misnamed LONG_DOUBLE_MNEM_SUFFIX, to e.g. FAR_BRANCH_SUFFIX - it's going
+ to disappear anyway.)
+
+2022-12-01 Tom de Vries <tdevries@suse.de>
+
+ [gdb/testsuite] Wait longer for core generation
+ When I run the gdb testsuite on a powerpc64le-linux system with (slow) nfs
+ file system, I run into timeouts due to core generation, like for instance:
+ ...
+ (gdb) gcore $outputs/gdb.ada/task_switch_in_core/crash.gcore^M
+ FAIL: gdb.ada/task_switch_in_core.exp: save a corefile (timeout)
+ ...
+
+ Fix this by using with_timeout_factor 3 in gdb_gcore_cmd.
+
+ Tested on powerpc64le-linux.
+ Approved-By: Tom Tromey <tom@tromey.com>
+
+2022-12-01 Tom de Vries <tdevries@suse.de>
+
+ [gdb/testsuite] Fix gdb.ada/float-bits.exp for powerpc64le
+ On powerpc64le-linux, I run into:
+ ...
+ (gdb) print 16llf#4000921fb54442d18469898cc51701b8#^M
+ $9 = <invalid float value>^M
+ (gdb) FAIL: gdb.ada/float-bits.exp: print \
+ 16llf#4000921fb54442d18469898cc51701b8#
+ ...
+
+ The problem is that we're using a hex string for the 128-bit IEEE quad long
+ double format, but the actual long double float format is:
+ ...
+ gdbarch_dump: long_double_format = floatformat_ibm_long_double_little^M
+ ...
+
+ Fix this by using the hex string obtained by compiling test.c:
+ ...
+ long double a = 5.0e+25L;
+ ...
+ like so:
+ ...
+ $ gcc -mlittle test.c -c -g
+ ...
+ and running gdb:
+ ...
+ $ gdb -q -batch test.o -ex "p /x a"
+ $1 = 0xc1e1c000000000004544adf4b7320335
+ ...
+ and likewise for -mbig:
+ ...
+ $ gdb -q -batch test.o -ex "p /x a"
+ $1 = 0x4544adf4b7320335c1e1c00000000000
+ ...
+
+ Tested on powerpc64le-linux.
+
+ I excercised the case of floatformat_ibm_long_double_big by
+ using "set endian big" in the test-case.
+
+ Note that for this patch to work correctly, recent commit aaa79cd62b8 ("[gdb]
+ Improve printing of float formats") is required.
+
+ PR testsuite/29816
+ Bug: https://sourceware.org/bugzilla/show_bug.cgi?id=29816
+ Approved-By: Tom Tromey <tom@tromey.com>
+
+2022-12-01 GDB Administrator <gdbadmin@sourceware.org>
+
+ Automatic date update in version.in
+
+2022-11-30 Tom de Vries <tdevries@suse.de>
+
+ [gdb/testsuite] Fix DUPLICATEs in s390-multiarch.exp
+ On s390x-linux, I run into:
+ ...
+ DUPLICATE: gdb.arch/s390-multiarch.exp: Linux v2
+ DUPLICATE: gdb.arch/s390-multiarch.exp: Linux v2
+ DUPLICATE: gdb.arch/s390-multiarch.exp: Linux v2
+ ...
+
+ Fix this by using with_test_prefix.
+
+ Tested on s390x-linux.
+
+2022-11-30 Tom de Vries <tdevries@suse.de>
+
+ [gdb/testsuite] Enable gdb.arch/s390-disassembler-options.exp for --enable-targets=all
+ On s390x-linux, I run into:
+ ...
+ DUPLICATE: gdb.arch/s390-disassembler-options.exp: \
+ show disassembler-options esa
+ ...
+
+ First, reproduce this on x86_64-linux with --enable-targets=all, by replacing
+ the test for 'istarget "s390*-*-*"' with a test for 'get_set_option_choices
+ "set architecture" "s390"'.
+
+ Fix the DUPLICATE by using with_test_prefix.
+
+ Also modernize the test-case by using clean_restart instead of gdb_exit/gdb_start.
+
+ Tested on x86_64-linux.
+
+2022-11-30 Michael Matz <matz@suse.de>
+
+ section-select: Fix exclude-file-3
+ this testcase wasn't correctly testing everything, it passed, even
+ though sections from an excluded file were included. Fixing this
+ reveals a problem in the new section selector. This fixes that as
+ well.
+
+ section-select: Remove unused code
+ walk_wild_file, hence walk_wild_section and walk_wild_section_handler
+ aren't called with the prefix tree. Hence initialization of the latter
+ and all potential special cases for it aren't used anymore. That also
+ removes the need to handler_data[] and some associated helper functions.
+ So, remove all of that.
+
+2022-11-30 Michael Matz <matz@suse.de>
+
+ section-select: Implement a prefix-tree
+ Now that we have a list of potentially matching sections per wild
+ statement we can actually pre-fill that one by going once over all input
+ sections and match their names against a prefix-tree that points to the
+ potentially matching wild statements.
+
+ So instead of looking at all sections names for each glob for each wild
+ statement we now look at the sections only once and then only check
+ against those globs that have a possibility of a match at all (usually
+ only one or two).
+
+ This pushes the whole section selection off the profiles.
+
+2022-11-30 Michael Matz <matz@suse.de>
+
+ section-select: Completely rebuild matches
+ The check_relocs callback (and others) might have created new
+ section behind our back and some of them (e.g. on powerpc the
+ "linker stubs" .got) need to come in front of all others, despite
+ being created late (a symptom would be "TOC opt*" failing on powerpc).
+
+ This resets all section matches before updating for newly created
+ sections (i.e. completely rebuilds the matches).
+
+2022-11-30 Michael Matz <matz@suse.de>
+
+ section-select: Lazily resolve section matches
+ and remember the results. Before this the order of section matching
+ is basically:
+
+ foreach script-wild-stmt S
+ foreach pattern P of S
+ foreach inputfile I
+ foreach section S of I
+ match S against P
+ if match: do action for S
+
+ And this process is done three or four times: for each top-level call to
+ walk_wild() or wild(), that is: check_input_sections, lang_gc_sections,
+ lang_find_relro_sections and of course map_input_to_output_sections.
+
+ So we iterate over all sections of all files many many times (for each
+ glob). Reality is a bit more complicated (some special glob types don't
+ need the full iteration over all sections, only over all files), but
+ that's the gist of it.
+
+ For future work this shuffles the whole ordering a bit by lazily doing
+ the matching process and memoizing results, trading a little memory for
+ a 75% speedup of the overall section selection process.
+
+ This lazy resolution introduces a problem with sections added late
+ that's corrected in the next patch.
+
+2022-11-30 Tom Tromey <tromey@adacore.com>
+
+ Bounds check access to Ada task state names
+ While looking into Ada tasking a little, I noticed that no bounds
+ checking is done on accesses to the Ada task state names arrays. This
+ isn't a problem currently, but if the runtime ever added numbers -- or
+ if there was some kind of runtime corruption -- it could cause a gdb
+ crash.
+
+ This patch adds range checking. It also adds a missing _() call when
+ printing from the 'task_states' array.
+
+2022-11-30 Tom Tromey <tromey@adacore.com>
+
+ Use ui_file_up in mi_interp
+ This changes mi_interp to use ui_file_up rather than explicit
+ management.
+
+ Approved-By: Simon Marchi <simon.marchi@efficios.com>
+
+2022-11-30 Tom Tromey <tromey@adacore.com>
+
+ Rename fields of cli_interp_base::saved_output_files
+ This renames the fields of cli_interp_base::saved_output_files, as
+ requested by Simon. I tried to choose names that more obviously
+ reflect what the field is used for. I also added a couple of
+ comments.
+
+ Approved-By: Simon Marchi <simon.marchi@efficios.com>
+
+2022-11-30 Tom de Vries <tdevries@suse.de>
+
+ [gdb] Improve printing of float formats
+ Currently, on x86_64, a little endian target, I get:
+ ...
+ $ gdb -q -batch -ex "maint print architecture" | grep " = floatformat"
+ gdbarch_dump: bfloat16_format = floatformat_bfloat16_big
+ gdbarch_dump: double_format = floatformat_ieee_double_big
+ gdbarch_dump: float_format = floatformat_ieee_single_big
+ gdbarch_dump: half_format = floatformat_ieee_half_big
+ gdbarch_dump: long_double_format = floatformat_i387_ext
+ ...
+ which suggests big endian.
+
+ This is due to this bit of code in pformat:
+ ...
+ /* Just print out one of them - this is only for diagnostics. */
+ return format[0]->name;
+ ...
+
+ Fix this by using gdbarch_byte_order to pick the appropriate index, such that
+ we have the more accurate:
+ ...
+ gdbarch_dump: bfloat16_format = floatformat_bfloat16_little
+ gdbarch_dump: half_format = floatformat_ieee_half_little
+ gdbarch_dump: float_format = floatformat_ieee_single_little
+ gdbarch_dump: double_format = floatformat_ieee_double_little
+ gdbarch_dump: long_double_format = floatformat_i387_ext
+ ...
+
+ Tested on x86_64-linux.
+
+2022-11-30 Alan Modra <amodra@gmail.com>
+
+ Correct ordering problem in comm-data.exp
+ * testsuite/ld-elf/comm-data.exp: Build libcomm-data.so before
+ attempting to read it to set ELF64.
+
+ regen SRC-POTFILES.in
+
+2022-11-30 Jan Beulich <jbeulich@suse.com>
+
+ x86/Intel: adjustment to restricted suffix derivation
+ In "x86/Intel: restrict suffix derivation" I think I screwed up
+ slightly, bringing a piece of code out of sync with its comment, and
+ resulting in a suffix potentially being derived when one isn't needed.
+
+2022-11-30 Jan Beulich <jbeulich@suse.com>
+
+ x86: clean up after removal of support for gcc <= 2.8.1
+ At the very least a comment in process_operands() is stale. Beyond that
+ there are effectively two options:
+ 1) It is possible that FADDP and FMULP were mistakenly not marked as
+ being in need of dealing with the compiler anomaly, and hence the
+ respective templates weren't removed at the time when they should
+ have been.
+ 2) It is also possible that there are indeed uses known beyond compiler
+ generated output for these two commutative opcodes, and hence the
+ templates need to stay.
+ To be on the safe side assume 2: Update the comment and fold the
+ templates into their "normal" ones (utilizing D), adjusting consuming
+ code accordingly.
+
+ For FMULP also add a comment paralleling a similar one FADDP has.
+
+2022-11-30 Jan Beulich <jbeulich@suse.com>
+
+ x86: drop FloatR
+ There are just 4 templates using it, which can be easily identified by
+ other means, as D is set only on a very limited number of FPU templates.
+ Also move the respective conditional out of the code path taken by all
+ "reverse match" insns (it probably should have been this way already
+ before, to avoid the one conditional in the common case).
+
+ With this the templates which had FloatR dropped no longer differ from
+ their AT&T syntax + mnemonic counterparts - the only difference is now
+ which of the two would be recognized. For this, however, we don't need
+ two templates - we can simply arrange the condition for setting
+ Opcode_FloatR accordingly.
+
+2022-11-30 Jan Beulich <jbeulich@suse.com>
+
+ x86: extend FPU test coverage for AT&T / Intel mnemonic differences
+ Before touching the templates, let's ensure we actually cover things:
+ For one FSUB{,R} and FDIV{,R} would better be tested with operands in
+ both possible orders. And then -mmnemonic=intel wasn't tested at all.
+
+2022-11-30 Joel Brobecker <brobecker@adacore.com>
+
+ src-release.sh: Fix gdb source tarball build failure due to libsframe
+ This script was recently changed as follow:
+
+ | commit e619dddb3a45780ae66d762756882a3b896b617d
+ | Date: Tue Nov 15 15:07:13 2022 -0800
+ | Subject: src-release.sh: Add libsframe
+ |
+ | Add libsframe to the list of top level directories that will be included
+ | in a release.
+
+ Since then, the gdb source tarball has been failing with the error
+ below during the "make configure-host configure-target" phase:
+
+ | make[3]: *** No rule to make target '../libsframe/libsframe.la',
+ | needed by 'libbfd.la'. Stop.
+ | make[3]: Leaving directory '/tmp/gdb-public/bfd'
+
+ This patch fixes the issue by adding libsframe to the list of
+ GDB_SUPPORT_DIRS, similar to what was done for BINUTILS.
+
+ ChangeLog:
+
+ * src-release.sh (GDB_SUPPORT_DIRS): Add libsframe.
+
+2022-11-30 GDB Administrator <gdbadmin@sourceware.org>
+
+ Automatic date update in version.in
+
+2022-11-29 Tom de Vries <tdevries@suse.de>
+
+ [gdb/testsuite] Fix gdb.base/vla-optimized-out.exp for ppc64le
+ On powerpc64le-linux, I run into:
+ ...
+ (gdb) PASS: gdb.base/vla-optimized-out.exp: o1: printed optimized out vla
+ p sizeof (a)^M
+ $2 = <optimized out>^M
+ (gdb) FAIL: gdb.base/vla-optimized-out.exp: o1: \
+ printed size of optimized out vla
+ ...
+
+ The problem happens as follows.
+
+ In order to find the size of the optimized out vla, gdb needs to evaluate:
+ ...
+ <155> DW_AT_upper_bound : 13 byte block: f3 1 53 23 1 8 20 24 8 20 26 31 1c \
+ (DW_OP_GNU_entry_value: (DW_OP_reg3 (r3)); DW_OP_plus_uconst: 1;
+ DW_OP_const1u: 32; DW_OP_shl; DW_OP_const1u: 32; DW_OP_shra; DW_OP_lit1;
+ DW_OP_minus)
+ ...
+
+ When trying to evaluate DW_OP_GNU_entry_value, it looks for a call site
+ matching the pc, but doesn't find it:
+ ...
+ $ gdb -q -batch outputs/gdb.base/vla-optimized-out/vla-optimized-out-o1 \
+ -ex "break f1" -ex run -ex "set debug entry-values 1" -ex "print sizeof (a)"
+ Breakpoint 1 at 0x1000067c: file vla-optimized-out.c, line 34.
+
+ Breakpoint 1, f1 (i=5) at vla-optimized-out.c:34
+ 34 }
+ DW_OP_entry_value resolving cannot find DW_TAG_call_site 0x100006b0 in main
+ $1 = <optimized out>
+ ....
+
+ The call site lookup fails because the call site label .LVL4:
+ ...
+ bl f1 # 11 *call_value_nonlocal_aixdi [length = 8]
+ nop
+ .LVL4:
+ ...
+ is not placed directly after the bl insn. This is gcc PR target/107909.
+
+ However, after manually fixing the .s file we have instead:
+ ...
+ Cannot find matching parameter at DW_TAG_call_site 0x10000690 at main
+ $1 = <optimized out>
+ ...
+ due to the fact that the call site has no call site parameters.
+
+ The call site does have a reference to the corresponding function f1, with
+ parameter i, for which we find location list entries:
+ ...
+ 0037 1000067c 10000680 (DW_OP_reg3 (r3))
+ 004a 10000680 10000690 (DW_OP_GNU_entry_value: (DW_OP_reg3 (r3));
+ DW_OP_stack_value)
+ ...
+ and we could use the fact that the current pc is in the 1000067c-10000680
+ range, and that that the range starts at the start of the function, to deduce
+ that DW_OP_GNU_entry_value: (DW_OP_reg3 (r3)) == DW_OP_reg3 (r3).
+ But that's a non-trivial enhancement, filed as enhancement PR symtab/29836.
+
+ Fix this by allowing <optimized out> for target powerpc and the gcc compiler.
+
+ Reviewed-By: Carl Love <cel@us.ibm.com>
+ Tested-By: Carl Love <cel@us.ibm.com>
+ PR testsuite/29813
+ Bug: https://sourceware.org/bugzilla/show_bug.cgi?id=29813
+
+2022-11-29 Simon Marchi <simon.marchi@polymtl.ca>
+
+ gdb/testsuite: make gdb_unload use gdb_test_multiple
+ In the failure seen by Philippe here:
+
+ https://inbox.sourceware.org/gdb-patches/20221120173024.3647464-1-philippe.waroquiers@skynet.be/
+
+ gdb_unload crashed GDB, leaving no trace in the test results. Change it
+ to use gdb_test_multiple, so that it leaves an UNRESOLVED result. I
+ think it is good practice anyway.
+
+ Make it return the result of gdb_test_multiple directly, change
+ gdb.python/py-objfile.exp accordingly.
+
+ Change gdb.base/endian.exp as well to avoid duplicate test names.
+
+ Change gdb.base/gnu-debugdata.exp to avoid recording a test result,
+ since gdb_unload does it already now.
+
+ Change-Id: I59a1e4947691330797e6ce23277942547c437a48
+ Approved-By: Tom de Vries <tdevries@suse.de>
+
+2022-11-29 Simon Marchi <simon.marchi@polymtl.ca>
+
+ gdb/testsuite: make gdb_test_multiple return immediately if send_gdb fails
+ In the failure seen by Philippe here:
+
+ https://inbox.sourceware.org/gdb-patches/20221120173024.3647464-1-philippe.waroquiers@skynet.be/
+
+ ... the testsuite only outputs PASSes, and an ERROR, resulting from an
+ uncaught exception. This is a bit sneaky, because ERRORs are not
+ reported in the test summary. In certain circumstances, it can be easy
+ to miss.
+
+ Normally, gdb_test_multiple outputs an UNRESOLVED when GDB crashes. But
+ this is only if it manages to send the command, and it's that command
+ that crashes GDB. Here, the ERROR is due to the fact that GDB had
+ already crashed by the time we entered gdb_test_multiple and tried to
+ send a command. GDB was crashed by the previous "file" command, sent by
+ gdb_unload. Because gdb_unload uses bare expect, it didn't record a
+ test failure when crashing GDB (this will be addressed separately).
+
+ In this patch, I propose to make gdb_test_multiple call unresolved
+ directly and return -1 send_gdb fails. This way, if GDB is already
+ crashed by the time we enter gdb_test_multiple, it will leave a trace in
+ the test results in the form of an UNRESOLVED. It will also spare us
+ the not-so-useful-in-my-opinion TCL backtrace.
+
+ Before, it looks like:
+
+ ERROR: Couldn't send python print(objfile.filename) to GDB.
+ ERROR: : spawn id exp9 not open
+ while executing
+ "expect {
+ -i exp9 -timeout 10
+ -re ".*A problem internal to GDB has been detected" {
+ fail "$message (GDB internal error)"
+ gdb_internal_error..."
+ ("uplevel" body line 1)
+ invoked from within
+ "uplevel $body" NONE : spawn id exp9 not open
+
+ And after:
+
+ Couldn't send python print(objfile.filename) to GDB.
+ UNRESOLVED: gdb.python/py-objfile.exp: objfile.filename after objfile is unloaded
+
+ Change-Id: I72af8dc0d687826fc3f76911c27a9e5f91b677ba
+ Approved-By: Tom de Vries <tdevries@suse.de>
+
+2022-11-29 Vladimir Mezentsev <vladimir.mezentsev@oracle.com>
+
+ gprofng: remove unused gprofng/src/DbeSession.cc.1
+
+2022-11-29 Max Filippov <jcmvbkbc@gmail.com>
+
+ xtensa: allow dynamic configuration
+ Import include/xtensa-dynconfig.h that defines XCHAL_* macros as fields
+ of a structure returned from the xtensa_get_config_v<x> function call.
+ Define that structure and fill it with default parameter values
+ specified in the include/xtensa-config.h.
+ Define reusable function xtensa_load_config that tries to load
+ configuration and return an address of an exported object from it.
+ Define functions xtensa_get_config_v{1,2} that use xtensa_load_config
+ to get structures xtensa_config_v{1,2}, either dynamically configured
+ or the default.
+
+ bfd/
+ * Makefile.am (BFD32_BACKENDS, BFD32_BACKENDS_CFILES): Append
+ xtensa-dynconfig.c.
+ * Makefile.in: Regenerate.
+ * configure: Regenerate.
+ * configure.ac (xtensa_elf32_be_vec, xtensa_elf32_le_vec): Add
+ xtensa-dynconfig.lo to the tb.
+ * elf32-xtensa.c (xtensa-config.h): Replace #include with
+ xtensa-dynconfig.h.
+ (XSHAL_ABI, XTHAL_ABI_WINDOWED, XTHAL_ABI_CALL0): Remove
+ definitions.
+ * xtensa-dynconfig.c: New file.
+ * xtensa-isa.c (xtensa-dynconfig.h): New #include.
+ (xtensa_get_modules): New function.
+ (xtensa_isa_init): Call xtensa_get_modules instead of taking
+ address of global xtensa_modules.
+
+ gas/
+ * config/tc-xtensa.c (xtensa-config.h): Replace #include with
+ xtensa-dynconfig.h.
+ (XTHAL_ABI_WINDOWED, XTHAL_ABI_CALL0, XTENSA_MARCH_EARLIEST):
+ Remove definitions.
+ * config/tc-xtensa.h (xtensa-config.h): Replace #include with
+ xtensa-dynconfig.h.
+ * config/xtensa-relax.c (xtensa-config.h): Replace #include with
+ xtensa-dynconfig.h.
+ (XCHAL_HAVE_WIDE_BRANCHES): Remove definition.
+
+ include/
+ * xtensa-dynconfig.h: New file.
+
+ ld/
+ * emultempl/xtensaelf.em (xtensa-config.h): Replace #include
+ with xtensa-dynconfig.h.
+ (XTHAL_ABI_WINDOWED, XTHAL_ABI_CALL0): Remove definitions.
+
+2022-11-29 GDB Administrator <gdbadmin@sourceware.org>
+
+ Automatic date update in version.in
+
+2022-11-28 Andrew Burgess <aburgess@redhat.com>
+
+ gdb/testsuite: remove use of then keyword from library files
+ The canonical form of 'if' in modern TCL is 'if {} {}'. But there's
+ still a bunch of places in the testsuite where we make use of the
+ 'then' keyword, and sometimes these get copies into new tests, which
+ just spreads poor practice.
+
+ This commit removes all use of the 'then' keyword from the testsuite
+ library files (in boards/, config/, and lib/). Previous commits have
+ removed all uses of the 'then' keyword from the test script files,
+ this commit just cleans up the library files.
+
+ There should be no changes in what is tested after this commit.
+
+2022-11-28 Andrew Burgess <aburgess@redhat.com>
+
+ gdb/testsuite: remove use of then keyword from gdb.*/*.exp scripts
+ The canonical form of 'if' in modern TCL is 'if {} {}'. But there's
+ still a bunch of places in the testsuite where we make use of the
+ 'then' keyword, and sometimes these get copies into new tests, which
+ just spreads poor practice.
+
+ This commit removes all use of the 'then' keyword from the remaining
+ gdb.*/*.exp scripts. Previous commits have done the bulk of this
+ removal, this commit just handles the remaining directories that each
+ contain a low number of instances.
+
+ There should be no changes in what is tested after this commit.
+
+2022-11-28 Andrew Burgess <aburgess@redhat.com>
+
+ gdb/testsuite: remove use of then keyword from gdb.multi/*.exp
+ The canonical form of 'if' in modern TCL is 'if {} {}'. But there's
+ still a bunch of places in the testsuite where we make use of the
+ 'then' keyword, and sometimes these get copies into new tests, which
+ just spreads poor practice.
+
+ This commit removes all use of the 'then' keyword from the gdb.multi/
+ test script directory.
+
+ There should be no changes in what is tested after this commit.
+
+2022-11-28 Andrew Burgess <aburgess@redhat.com>
+
+ gdb/testsuite: remove use of then keyword from gdb.fortran/*.exp
+ The canonical form of 'if' in modern TCL is 'if {} {}'. But there's
+ still a bunch of places in the testsuite where we make use of the
+ 'then' keyword, and sometimes these get copies into new tests, which
+ just spreads poor practice.
+
+ This commit removes all use of the 'then' keyword from the gdb.fortran/
+ test script directory.
+
+ There should be no changes in what is tested after this commit.
+
+2022-11-28 Andrew Burgess <aburgess@redhat.com>
+
+ gdb/testsuite: remove use of then keyword from gdb.disasm/*.exp
+ The canonical form of 'if' in modern TCL is 'if {} {}'. But there's
+ still a bunch of places in the testsuite where we make use of the
+ 'then' keyword, and sometimes these get copies into new tests, which
+ just spreads poor practice.
+
+ This commit removes all use of the 'then' keyword from the gdb.disasm/
+ test script directory.
+
+ There should be no changes in what is tested after this commit.
+
+2022-11-28 Andrew Burgess <aburgess@redhat.com>
+
+ gdb/testsuite: remove use of then keyword from gdb.reverse/*.exp
+ The canonical form of 'if' in modern TCL is 'if {} {}'. But there's
+ still a bunch of places in the testsuite where we make use of the
+ 'then' keyword, and sometimes these get copies into new tests, which
+ just spreads poor practice.
+
+ This commit removes all use of the 'then' keyword from the gdb.reverse/
+ test script directory.
+
+ There should be no changes in what is tested after this commit.
+
+2022-11-28 Andrew Burgess <aburgess@redhat.com>
+
+ gdb/testsuite: remove use of then keyword from gdb.trace/*.exp
+ The canonical form of 'if' in modern TCL is 'if {} {}'. But there's
+ still a bunch of places in the testsuite where we make use of the
+ 'then' keyword, and sometimes these get copies into new tests, which
+ just spreads poor practice.
+
+ This commit removes all use of the 'then' keyword from the gdb.trace/
+ test script directory.
+
+ There should be no changes in what is tested after this commit.
+
+2022-11-28 Andrew Burgess <aburgess@redhat.com>
+
+ gdb/testsuite: remove use of then keyword from gdb.threads/*.exp
+ The canonical form of 'if' in modern TCL is 'if {} {}'. But there's
+ still a bunch of places in the testsuite where we make use of the
+ 'then' keyword, and sometimes these get copies into new tests, which
+ just spreads poor practice.
+
+ This commit removes all use of the 'then' keyword from the gdb.threads/
+ test script directory.
+
+ There should be no changes in what is tested after this commit.
+
+2022-11-28 Andrew Burgess <aburgess@redhat.com>
+
+ gdb/testsuite: remove use of then keyword from gdb.python/*.exp
+ The canonical form of 'if' in modern TCL is 'if {} {}'. But there's
+ still a bunch of places in the testsuite where we make use of the
+ 'then' keyword, and sometimes these get copies into new tests, which
+ just spreads poor practice.
+
+ This commit removes all use of the 'then' keyword from the gdb.python/
+ test script directory.
+
+ There should be no changes in what is tested after this commit.
+
+2022-11-28 Andrew Burgess <aburgess@redhat.com>
+
+ gdb/testsuite: remove use of then keyword from gdb.cp/*.exp
+ The canonical form of 'if' in modern TCL is 'if {} {}'. But there's
+ still a bunch of places in the testsuite where we make use of the
+ 'then' keyword, and sometimes these get copies into new tests, which
+ just spreads poor practice.
+
+ This commit removes all use of the 'then' keyword from the gdb.cp/
+ test script directory.
+
+ There should be no changes in what is tested after this commit.
+
+2022-11-28 Andrew Burgess <aburgess@redhat.com>
+
+ gdb/testsuite: remove use of then keyword from gdb.arch/*.exp
+ The canonical form of 'if' in modern TCL is 'if {} {}'. But there's
+ still a bunch of places in the testsuite where we make use of the
+ 'then' keyword, and sometimes these get copies into new tests, which
+ just spreads poor practice.
+
+ This commit removes all use of the 'then' keyword from the gdb.arch/
+ test script directory.
+
+ There should be no changes in what is tested after this commit.
+
+2022-11-28 Andrew Burgess <aburgess@redhat.com>
+
+ gdb/testsuite: remove use of then keyword from gdb.base/*.exp
+ The canonical form of 'if' in modern TCL is 'if {} {}'. But there's
+ still a bunch of places in the testsuite where we make use of the
+ 'then' keyword, and sometimes these get copies into new tests, which
+ just spreads poor practice.
+
+ This commit removes all use of the 'then' keyword from the gdb.base/
+ test script directory.
+
+ There should be no changes in what is tested after this commit.
+
+2022-11-28 Andrew Burgess <aburgess@redhat.com>
+
+ gdb/testsuite: remove use of then keyword from gdb.ada/*.exp
+ The canonical form of 'if' in modern TCL is 'if {} {}'. But there's
+ still a bunch of places in the testsuite where we make use of the
+ 'then' keyword, and sometimes these get copies into new tests, which
+ just spreads poor practice.
+
+ This commit removes all use of the 'then' keyword from the gdb.ada/
+ test script directory.
+
+ There should be no changes in what is tested after this commit.
+
+2022-11-28 Andrew Burgess <aburgess@redhat.com>
+
+ gdb/testsuite: remove DOS line endings from a test script
+ The gdb.fortran/nested-funcs.exp test script has DOS line endings. I
+ can see no reason why this script needs DOS line endings.
+
+ Convert to UNIX line endings.
+
+ There should be no change in what is tested after this commit.
+
+2022-11-28 Tom Tromey <tromey@adacore.com>
+
+ Don't let gdb_stdlog use pager
+ When using the "set logging" commands, cli_interp_base::set_logging
+ will send gdb_stdlog output (among others) to the tee it makes for
+ gdb_stdout. However, this has the side effect of also causing logging
+ to use the pager. This is PR gdb/29787.
+
+ This patch fixes the problem by keeping stderr and stdlog separate
+ from stdout, preserving the rule that only gdb_stdout should page.
+
+ Bug: https://sourceware.org/bugzilla/show_bug.cgi?id=29787
+
+2022-11-28 Tom Tromey <tromey@adacore.com>
+
+ Don't let tee_file own a stream
+ Right now, tee_file owns the second stream it writes to. This is done
+ for the convenience of the users. In a subsequent patch, this will no
+ longer be convenient, so this patch moves the responsibility for
+ ownership to the users of tee_file.
+
+ Remove 'saved_output' global
+ CLI redirect uses a global variable, 'saved_output'. However, globals
+ are generally bad, and there is no need for this one -- it can be a
+ member of cli_interp_base. This patch makes this change.
+
+2022-11-28 Hannes Domani <ssbssa@yahoo.de>
+
+ Remove no longer used jump label
+ The out label is unused since wait_for_debug_event is in a different thread.
+
+ Actually set m_is_async to current async mode
+ Looks like this was missed in the async mode implementation.
+
+2022-11-28 Hannes Domani <ssbssa@yahoo.de>
+
+ Don't use auto for lambda parameter
+ Older gcc versions (here 4.9.2) can't handle auto for a lambda parameter:
+
+ ../../gdb/windows-nat.c: In member function 'void windows_nat_target::delete_thread(ptid_t, DWORD, bool)':
+ ../../gdb/windows-nat.c:629:12: error: use of 'auto' in lambda parameter declaration only available with -std=c++1y or -std=gnu++1y [-Werror]
+ [=] (auto &th)
+ ^
+
+2022-11-28 Hannes Domani <ssbssa@yahoo.de>
+
+ Fix calling convention of thread entry point
+ For i686 the CreateThread entry point function needs the WINAPI (stdcall)
+ calling convention:
+
+ ../../gdb/windows-nat.c: In constructor 'windows_nat_target::windows_nat_target()':
+ ../../gdb/windows-nat.c:450:56: error: invalid user-defined conversion from 'windows_nat_target::windows_nat_target()::<lambda(LPVOID)>' to 'LPTHREAD_START_ROUTINE' {aka 'long unsigned int (__attribute__((stdcall)) *)(void*)'} [-fpermissive]
+ 450 | HANDLE bg_thread = CreateThread (nullptr, 64 * 1024, fn, this, 0, nullptr);
+ | ^~
+ ../../gdb/windows-nat.c:444:13: note: candidate is: 'constexpr windows_nat_target::windows_nat_target()::<lambda(LPVOID)>::operator DWORD (*)(LPVOID)() const' (near match)
+ 444 | auto fn = [] (LPVOID self) -> DWORD
+ | ^
+ ../../gdb/windows-nat.c:444:13: note: no known conversion from 'DWORD (*)(LPVOID)' {aka 'long unsigned int (*)(void*)'} to 'LPTHREAD_START_ROUTINE' {aka 'long unsigned int (__attribute__((stdcall)) *)(void*)'}
+
+ Since it's not possible to change the calling convention of a lambda, I've
+ moved it to a separate function.
+
+2022-11-28 Andrew Burgess <aburgess@redhat.com>
+
+ gdb: mark disassembler function callback types as noexcept
+ In disasm.h we define a set of types that are used by the various
+ disassembler classes to hold callback functions before passing the
+ callbacks into libopcodes.
+
+ Because libopcodes is C code, and on some (many?) targets, C code is
+ compiled without exception support, it is important that GDB not try
+ to throw an exception over libopcode code.
+
+ In the previous commit all the existing callbacks were marked as
+ noexcept, however, this doesn't protect us from a future change to GDB
+ either adding a new callback that is not noexcept, or removing the
+ noexcept keyword from an existing callback.
+
+ In this commit I mark all the callback types as noexcept. This means
+ that GDB's disassembler classes will no longer compile if we try to
+ pass a callback that is not marked as noexcept.
+
+ At least, that's the idea. Unfortunately, it's not that easy.
+
+ Before C++17, the noexcept keyword on a function typedef would be
+ ignored, thus:
+
+ using func_type = void (*) (void) noexcept;
+
+ void
+ a_func ()
+ {
+ throw 123;
+ }
+
+ void
+ some_func (func_type f)
+ {
+ f ();
+ }
+
+ int
+ main ()
+ {
+ some_func (a_func);
+ return 0;
+ }
+
+ Will compile just fine for C++11 and C++14 with GCC. Clang on the
+ other hand complains that 'noexcept' should not appear on function
+ types, but then does appear to correctly complain that passing a_func
+ is a mismatch in the set of exceptions that could be thrown.
+
+ Switching to C++17 and both GCC and Clang correctly point out that
+ passing a_func is an invalid conversion relating to the noexcept
+ keyword. Changing a_func to:
+
+ void
+ a_func () noexcept
+ { /* Nothing. */ }
+
+ And for C++17 both GCC and Clang compile this just fine.
+
+ My conclusion then is that adding the noexcept keyword to the function
+ types is pointless while GDB is not compiled as C++17, and silencing
+ the warnings would require us to jump through a bunch of hoops.
+
+ And so, in this commit, I define a macro LIBOPCODE_CALLBACK_NOEXCEPT,
+ this macro expands to noexcept when compiling for C++17, but otherwise
+ expands to nothing. I then add this macro to the function types.
+
+ I've compiled GDB as the default C++11 and also forced the compile to
+ C++17. When compiling as C++17 I spotted a few additional places
+ where callbacks needed to be marked noexcept (these fixes were merged
+ into the previous commit, but this confirmed to be that the macro is
+ working as expected).
+
+2022-11-28 Andrew Burgess <aburgess@redhat.com>
+
+ gdb/disasm: mark functions passed to the disassembler noexcept
+ While working on another patch, Simon pointed out that GDB could be
+ improved by marking the functions passed to the disassembler as
+ noexcept.
+
+ https://sourceware.org/pipermail/gdb-patches/2022-October/193084.html
+
+ The reason this is important is the on some hosts, libopcodes, being C
+ code, will not be compiled with support for handling exceptions. As
+ such, an attempt to throw an exception over libopcodes code will cause
+ GDB to terminate.
+
+ See bug gdb/29712 for an example of when this happened.
+
+ In this commit all the functions that are passed to the disassembler,
+ and which might be used as callbacks by libopcodes are marked
+ noexcept.
+
+ Ideally, I would have liked to change these typedefs:
+
+ using read_memory_ftype = decltype (disassemble_info::read_memory_func);
+ using memory_error_ftype = decltype (disassemble_info::memory_error_func);
+ using print_address_ftype = decltype (disassemble_info::print_address_func);
+ using fprintf_ftype = decltype (disassemble_info::fprintf_func);
+ using fprintf_styled_ftype = decltype (disassemble_info::fprintf_styled_func);
+
+ which are declared in disasm.h, as including the noexcept keyword.
+ However, when I tried this, I ran into this warning/error:
+
+ In file included from ../../src/gdb/disasm.c:25:
+ ../../src/gdb/disasm.h: In constructor ‘gdb_printing_disassembler::gdb_printing_disassembler(gdbarch*, ui_file*, gdb_disassemble_info::read_memory_ftype, gdb_disassemble_info::memory_error_ftype, gdb_disassemble_info::print_address_ftype)’:
+ ../../src/gdb/disasm.h:116:3: error: mangled name for ‘gdb_printing_disassembler::gdb_printing_disassembler(gdbarch*, ui_file*, gdb_disassemble_info::read_memory_ftype, gdb_disassemble_info::memory_error_ftype, gdb_disassemble_info::print_address_ftype)’ will change in C++17 because the exception specification is part of a function type [-Werror=noexcept-type]
+ 116 | gdb_printing_disassembler (struct gdbarch *gdbarch,
+ | ^~~~~~~~~~~~~~~~~~~~~~~~~
+
+ So I've left that change out. This does mean that if somebody adds a
+ new use of the disassembler classes in the future, and forgets to mark
+ the callbacks as noexcept, this will compile fine. We'll just have to
+ manually check for that during review.
+
+2022-11-28 Andrew Burgess <aburgess@redhat.com>
+
+ gdb/python: avoid throwing an exception over libopcodes code
+ Bug gdb/29712 identifies a problem with the Python disassembler API.
+ In some cases GDB will try to throw an exception through the
+ libopcodes disassembler code, however, not all targets include
+ exception unwind information when compiling C code, for targets that
+ don't include this information GDB will terminate when trying to pass
+ the exception through libopcodes.
+
+ To explain what GDB is trying to do, consider the following trivial
+ use of the Python disassembler API:
+
+ class ExampleDisassembler(gdb.disassembler.Disassembler):
+
+ class MyInfo(gdb.disassembler.DisassembleInfo):
+ def __init__(self, info):
+ super().__init__(info)
+
+ def read_memory(self, length, offset):
+ return super().read_memory(length, offset)
+
+ def __init__(self):
+ super().__init__("ExampleDisassembler")
+
+ def __call__(self, info):
+ info = self.MyInfo(info)
+ return gdb.disassembler.builtin_disassemble(info)
+
+ This disassembler doesn't add any value, it defers back to GDB to do
+ all the actual work, but it serves to allow us to discuss the problem.
+
+ The problem occurs when a Python exception is raised by the
+ MyInfo.read_memory method. The MyInfo.read_memory method is called
+ from the C++ function gdbpy_disassembler::read_memory_func. The C++
+ stack at the point this function is called looks like this:
+
+ #0 gdbpy_disassembler::read_memory_func (memaddr=4198805, buff=0x7fff9ab9d2a8 "\220ӹ\232\377\177", len=1, info=0x7fff9ab9d558) at ../../src/gdb/python/py-disasm.c:510
+ #1 0x000000000104ba06 in fetch_data (info=0x7fff9ab9d558, addr=0x7fff9ab9d2a9 "ӹ\232\377\177") at ../../src/opcodes/i386-dis.c:305
+ #2 0x000000000104badb in ckprefix (ins=0x7fff9ab9d100) at ../../src/opcodes/i386-dis.c:8571
+ #3 0x000000000104e28e in print_insn (pc=4198805, info=0x7fff9ab9d558, intel_syntax=-1) at ../../src/opcodes/i386-dis.c:9548
+ #4 0x000000000104f4d4 in print_insn_i386 (pc=4198805, info=0x7fff9ab9d558) at ../../src/opcodes/i386-dis.c:9949
+ #5 0x00000000004fa7ea in default_print_insn (memaddr=4198805, info=0x7fff9ab9d558) at ../../src/gdb/arch-utils.c:1033
+ #6 0x000000000094fe5e in i386_print_insn (pc=4198805, info=0x7fff9ab9d558) at ../../src/gdb/i386-tdep.c:4072
+ #7 0x0000000000503d49 in gdbarch_print_insn (gdbarch=0x5335560, vma=4198805, info=0x7fff9ab9d558) at ../../src/gdb/gdbarch.c:3351
+ #8 0x0000000000bcc8c6 in disasmpy_builtin_disassemble (self=0x7f2ab07f54d0, args=0x7f2ab0789790, kw=0x0) at ../../src/gdb/python/py-disasm.c:324
+
+ ### ... snip lots of frames as we pass through Python itself ...
+
+ #22 0x0000000000bcd860 in gdbpy_print_insn (gdbarch=0x5335560, memaddr=0x401195, info=0x7fff9ab9e3c8) at ../../src/gdb/python/py-disasm.c:783
+ #23 0x00000000008995a5 in ext_lang_print_insn (gdbarch=0x5335560, address=0x401195, info=0x7fff9ab9e3c8) at ../../src/gdb/extension.c:939
+ #24 0x0000000000741aaa in gdb_print_insn_1 (gdbarch=0x5335560, vma=0x401195, info=0x7fff9ab9e3c8) at ../../src/gdb/disasm.c:1078
+ #25 0x0000000000741bab in gdb_disassembler::print_insn (this=0x7fff9ab9e3c0, memaddr=0x401195, branch_delay_insns=0x0) at ../../src/gdb/disasm.c:1101
+
+ So gdbpy_disassembler::read_memory_func is called from the libopcodes
+ disassembler to read memory, this C++ function then calls into user
+ supplied Python code to do the work.
+
+ If the user supplied Python code raises an gdb.MemoryError exception
+ indicating the memory read failed, this is fine. The C++ code
+ converts this exception back into a return value that libopcodes can
+ understand, and returns to libopcodes.
+
+ However, if the user supplied Python code raises some other exception,
+ what we want is for this exception to propagate through GDB and appear
+ as if raised by the call to gdb.disassembler.builtin_disassemble. To
+ achieve this, when gdbpy_disassembler::read_memory_func spots an
+ unknown Python exception, we must pass the information about this
+ exception from frame #0 to frame #8 in the above backtrace. Frame #8
+ is the C++ implementation of gdb.disassembler.builtin_disassemble, and
+ so it is this function that we want to re-raise the unknown Python
+ exception, so the user can, if they want, catch the exception in their
+ code.
+
+ The previous mechanism by which the exception was passed was to pack
+ the details of the Python exception into a C++ exception, then throw
+ the exception from frame #0, and catch the exception in frame #8,
+ unpack the details of the Python exception, and re-raise it.
+
+ However, this relies on the exception passing through frames #1 to #7,
+ some of which are in libopcodes, which is C code, and so, might not be
+ compiled with exception support.
+
+ This commit proposes an alternative solution that does not rely on
+ throwing a C++ exception.
+
+ When we spot an unhandled Python exception in frame #0, we will store
+ the details of this exception within the gdbpy_disassembler object
+ currently in use. Then we return to libopcodes a value indicating
+ that the memory_read failed.
+
+ libopcodes will now continue to disassemble as though that memory read
+ failed (with one special case described below), then, when we
+ eventually return to disasmpy_builtin_disassemble we check to see if
+ there is an exception stored in the gdbpy_disassembler object. If
+ there is then this exception can immediately be installed, and then we
+ return back to Python, when the user will be able to catch the
+ exception.
+
+ There is one extra change in gdbpy_disassembler::read_memory_func.
+ After the first call that results in an exception being stored on the
+ gdbpy_disassembler object, any future calls to the ::read_memory_func
+ function will immediately return as if the read failed. This avoids
+ any additional calls into user supplied Python code.
+
+ My thinking here is that should the first call fail with some unknown
+ error, GDB should not keep trying with any additional calls. This
+ maintains the illusion that the exception raised from
+ MyInfo.read_memory is immediately raised by
+ gdb.disassembler.builtin_disassemble. I have no tests for this change
+ though - to trigger this issue would rely on a libopcodes disassembler
+ that will try to read further memory even after the first failed
+ read. I'm not aware of any such disassembler that currently does
+ this, but that doesn't mean such a disassembler couldn't exist in the
+ future.
+
+ With this change in place the gdb.python/py-disasm.exp test should now
+ pass on AArch64.
+
+ Bug: https://sourceware.org/bugzilla/show_bug.cgi?id=29712
+
+ Approved-By: Simon Marchi <simon.marchi@efficios.com>
+
+2022-11-28 Tom Tromey <tom@tromey.com>
+
+ Remove reset_ecs and execution_control_state::reset
+ I noticed that execution_control_state has a 'reset' method, and
+ there's also a 'reset_ecs' function that calls it. This patch cleans
+ this area up a little by adding a parameter to the constructor and (a
+ change Simon suggested) removing the reset method. Some extraneous
+ variables are also removed, like:
+
+ - struct execution_control_state ecss;
+ - struct execution_control_state *ecs = &ecss;
+
+ Here 'ecs' is never changed, so this patch removes it entirely in
+ favor of just using the object everywhere.
+
+ Regression tested on x86-64 Fedora 34.
+
+ Approved-By: Simon Marchi <simon.marchi@efficios.com>
+
+2022-11-28 Andrew Burgess <aburgess@redhat.com>
+
+ gdb: relax requirement for the map_failed stap probe to be present
+ From glibc 2.35 and later, the "map_failed" stap probe is no longer
+ included in glibc. The removal of the probe looks like an accident,
+ but it was caused by a glibc commit which meant that the "map_failed"
+ probe could no longer be reached; the compiler then helpfully
+ optimised out the probe.
+
+ In GDB, in solib-svr4.c, we have a list of probes that we look for
+ related to the shared library loading detection. If any of these
+ probes are missing then GDB will fall back to the non-probe based
+ mechanism for detecting shared library loading. The "map_failed"
+ probe is include in the list of required probes.
+
+ This means that on glibc 2.35 (or later) systems, GDB is going to
+ always fall back to the non-probes based mechanism for detecting
+ shared library loading.
+
+ I raised a glibc bug to discuss this issue:
+
+ https://sourceware.org/bugzilla/show_bug.cgi?id=29818
+
+ But, whatever the ultimate decision from the glibc team, given there
+ are version of glibc in the wild without the "map_failed" probe, we
+ probably should update GDB to handle this situation.
+
+ The "map_failed" probe is already a little strange, very early
+ versions of glibc didn't include this probe, so, in some cases, if
+ this probe is missing GDB is happy to ignore it. This is fine, the
+ action associated with this probe inside GDB is DO_NOTHING, this means
+ the probe isn't actually required in order for GDB to correctly detect
+ the loading of shared libraries.
+
+ In this commit I propose changing the rules so that any probe whose
+ action is DO_NOTHING, is optional.
+
+ There is one possible downside to this change, and that concerns 'set
+ stop-on-solib-events on'. If a probe is removed from glibc, but the
+ old style breakpoint based mechanism is still in place within glibc
+ for that same event, then GDB will stop when using the old style
+ non-probe based mechanism, but not when using the probes based
+ mechanism.
+
+ For the map_failed case this is not a problem, both the map_failed
+ probe, and the call to the old style breakpoint location were
+ optimised out, and so neither event (probes based, or breakpoint
+ based) will trigger. This would only become an issue if glibc removed
+ a probe, but left the breakpoint in place (this would almost certainly
+ be a bug in glibc).
+
+ For now, I'm proposing that we just don't worry about this. Because
+ some probes have actions that are not DO_NOTHING, then we know the
+ user will always seem _some_ stops when a shared library is
+ loaded/unloaded, and (I'm guessing), in most cases, that's all they
+ care about. I figure when someone complains then we can figure out
+ what the right solution is then.
+
+ With this commit in place, then, when using a glibc 2.35 or later
+ system, GDB will once again use the stap probes for shared library
+ detection.
+
+ Reviewed-By: Lancelot SIX <lancelot.six@amd.com>
+
+2022-11-28 Tom de Vries <tdevries@suse.de>
+
+ [gdb/testsuite] Require hw watchpoint in gdb.ada/task_watch.exp
+ On powerpc64le-linux I run into:
+ ...
+ (gdb) PASS: gdb.ada/task_watch.exp: info tasks before inserting breakpoint
+ watch -location value task 3^M
+ Watchpoint 2: -location value^M
+ (gdb) PASS: gdb.ada/task_watch.exp: watch -location value task 3
+ continue^M
+ Continuing.^M
+ [Thread 0x7ffff7ccf170 (LWP 65550) exited]^M
+ [Thread 0x7ffff7abf170 (LWP 65551) exited]^M
+ FAIL: gdb.ada/task_watch.exp: continue to watchpoint (timeout)
+ ...
+
+ On x86_64-linux (where the test-case passes), a hardware watchpoint is used:
+ ...
+ (gdb) PASS: gdb.ada/task_watch.exp: info tasks before inserting breakpoint
+ watch -location value task 3^M
+ Hardware watchpoint 2: -location value^M
+ ...
+ and after forcing "set can-use-hw-watchpoints 0" we can intermittently
+ reproduce the same failure.
+
+ In the gdb documentation related to watchpoints in multi-threaded programs, we
+ read:
+ ...
+ Warning: In multi-threaded programs, software watchpoints have only limited
+ usefulness. If GDB creates a software watchpoint, it can only watch the value
+ of an expression in a single thread. If you are confident that the expression
+ can only change due to the current thread’s activity (and if you are also
+ confident that no other thread can become current), then you can use software
+ watchpoints as usual. However, GDB may not notice when a non-current thread’s
+ activity changes the expression. (Hardware watchpoints, in contrast, watch an
+ expression in all threads.)
+ ...
+
+ Since the ada task construct is mapped onto threads, it seems that the
+ same limitation holds for tasks.
+
+ Fix this by using skip_hw_watchpoint_tests.
+
+ Tested on powerpc64-linux.
+ Tested-By: Carl Love <cel@us.ibm.com>
+
+2022-11-28 Tom de Vries <tdevries@suse.de>
+
+ [gdb/testsuite] Fix gdb.ada/out_of_line_in_inlined.exp for ppc64le
+ On powerpc64le-linux, with test-case gdb.ada/out_of_line_in_inlined.exp I run
+ into:
+ ...
+ (gdb) run ^M
+ Starting program: foo_o224_021-all ^M
+ ^M
+ Breakpoint 1, 0x0000000010002f48 in foo_o224_021.child1.child2 (s=...) at \
+ foo_o224_021.adb:24^M
+ 24 function Child2 (S : String) return Boolean is -- STOP^M
+ (gdb) FAIL: gdb.ada/out_of_line_in_inlined.exp: scenario=all: \
+ run to foo_o224_021.child1.child2
+ ...
+
+ The breakpoint is correctly set at the local entry point, and given that the
+ local entry point doesn't correspond to a line number entry, the instruction
+ address of the breakpoint is shown.
+
+ The problem is that test-case doesn't expect the breakpoint address.
+
+ Fix this by allowing the breakpoint address to occur.
+
+ Tested on powerpc64le-linux.
+
+2022-11-28 Michael Matz <matz@suse.de>
+
+ Only use wild_sort_fast
+ there's no reason why the tree-based variant can't always be used
+ when sorting is required, it merely needs to also support filename
+ sorting and have a fast path for insertion at end (aka rightmost tree
+ leaf).
+
+ The filename sorting isn't tested anywhere and the only scripttempl
+ that uses it is avr (for 'SORT(*)(.ctors)'), and I believe even there it
+ was a mistake. Either way, this adds a testcase for filename sorting as
+ well.
+
+ Then the non-BST based sorting can be simplified to only support
+ the fast case of no sorting required at all (at the same time renaming
+ the two variants to _sort and _nosort).
+
+2022-11-28 Michael Matz <matz@suse.de>
+
+ Special case more simple patterns
+ fnmatch is slow, so avoiding it in more cases is good. This implements
+ a more generic version of match_simple_wild which needs some
+ pre-processing of patterns. In particular it supports patterns of the
+ form PREFIX*SUFFIX (where all parts are optional), i.e. a super set of
+ what's handled now. Most section matchers of this form and hence don't
+ need any calls to fnmatch anymore.
+
+ We retain the implementation of match_simple_wild for the filename
+ matchers (they aren't called often enough to matter).
+
+2022-11-28 Simon Marchi <simon.marchi@polymtl.ca>
+
+ gdb/testsuite: fail if gdb_start_cmd fails
+ I broke gdb.ada/start.exp, and did not notice it, because it outputs an
+ UNTESTED if gdb_start_cmd fails. I don't really see when start would
+ fail and it's not a problem that should be looked at. Change all spots
+ that call untested after a gdb_start_cmd failure, use fail instead.
+
+ Doing so caused some failures with the native-gdbserver board. Some
+ tests that use "start" were relying on the fact that start would fail
+ with that board to just return with "untested". Change them to add an
+ early return if use_gdb_stub returns true.
+
+ Some gdb.pascal tests also failed with native-gdbserver, because they
+ did use gdb_start_cmd to start the inferior, for no good reason.
+ Convert them to use runto_main instead, which does the right thing if
+ the target is a stub.
+
+ A further refactoring could be to make gdb_start_cmd match the expected
+ breakpoint hit and the prompt, which it doesn't do currently (it leaves
+ that to the callers, but not all of them do).
+
+ Change-Id: I097370851213e798ff29fb6cf8ba25ef7d2be007
+ Reviewed-By: Bruno Larsen <blarsen@redhat.com>
+ Approved-By: Andrew Burgess <aburgess@redhat.com>
+
+2022-11-28 Tom Tromey <tromey@adacore.com>
+
+ Fix range type signed-ness heuristic
+ The code to create a range type has a heuristic to decide whether the
+ range is unsigned. However, this heuristic can fail if the upper
+ bound of the range has its high bit set, because the test is done
+ using LONGEST.
+
+ With this patch, if the underlying type of a range is unsigned, then
+ the range will always be unsigned. A new test is included.
+
+ Regression tested on x86-64 Fedora 34. We've also been using this
+ internally at AdaCore for a while.
+
+2022-11-28 Simon Marchi <simon.marchi@efficios.com>
+
+ gdb: disable commit resumed in target_kill
+ New in this version:
+
+ - Better comment in target_kill
+ - Uncomment line in test to avoid hanging when exiting, when testing on
+ native-extended-gdbserver
+
+ PR 28275 shows that doing a sequence of:
+
+ - Run inferior in background (run &)
+ - kill that inferior
+ - Run again
+
+ We get into this assertion:
+
+ /home/smarchi/src/binutils-gdb/gdb/target.c:2590: internal-error: target_wait: Assertion `!proc_target->commit_resumed_state' failed.
+
+ #0 internal_error_loc (file=0x5606b344e740 "/home/smarchi/src/binutils-gdb/gdb/target.c", line=2590, fmt=0x5606b344d6a0 "%s: Assertion `%s' failed.") at /home/smarchi/src/binutils-gdb/gdbsupport/errors.cc:54
+ #1 0x00005606b6296475 in target_wait (ptid=..., status=0x7fffb9390630, options=...) at /home/smarchi/src/binutils-gdb/gdb/target.c:2590
+ #2 0x00005606b5767a98 in startup_inferior (proc_target=0x5606bfccb2a0 <the_amd64_linux_nat_target>, pid=3884857, ntraps=1, last_waitstatus=0x0, last_ptid=0x0) at /home/smarchi/src/binutils-gdb/gdb/nat/fork-inferior.c:482
+ #3 0x00005606b4e6c9c5 in gdb_startup_inferior (pid=3884857, num_traps=1) at /home/smarchi/src/binutils-gdb/gdb/fork-child.c:132
+ #4 0x00005606b50f14a5 in inf_ptrace_target::create_inferior (this=0x5606bfccb2a0 <the_amd64_linux_nat_target>, exec_file=0x604000039f50 "/home/smarchi/build/binutils-gdb/gdb/test", allargs="", env=0x61500000a580, from_tty=1)
+ at /home/smarchi/src/binutils-gdb/gdb/inf-ptrace.c:105
+ #5 0x00005606b53b6d23 in linux_nat_target::create_inferior (this=0x5606bfccb2a0 <the_amd64_linux_nat_target>, exec_file=0x604000039f50 "/home/smarchi/build/binutils-gdb/gdb/test", allargs="", env=0x61500000a580, from_tty=1)
+ at /home/smarchi/src/binutils-gdb/gdb/linux-nat.c:978
+ #6 0x00005606b512b79b in run_command_1 (args=0x0, from_tty=1, run_how=RUN_NORMAL) at /home/smarchi/src/binutils-gdb/gdb/infcmd.c:468
+ #7 0x00005606b512c236 in run_command (args=0x0, from_tty=1) at /home/smarchi/src/binutils-gdb/gdb/infcmd.c:526
+
+ When running the kill command, commit_resumed_state for the
+ process_stratum_target (linux-nat, here) is true. After the kill, when
+ there are no more threads, commit_resumed_state is still true, as
+ nothing touches this flag during the kill operation. During the
+ subsequent run command, run_command_1 does:
+
+ scoped_disable_commit_resumed disable_commit_resumed ("running");
+
+ We would think that this would clear the commit_resumed_state flag of
+ our native target, but that's not the case, because
+ scoped_disable_commit_resumed iterates on non-exited inferiors in order
+ to find active process targets. And after the kill, the inferior is
+ exited, and the native target was unpushed from it anyway. So
+ scoped_disable_commit_resumed doesn't touch the commit_resumed_state
+ flag of the native target, it stays true. When reaching target_wait, in
+ startup_inferior (to consume the initial expect stop events while the
+ inferior is starting up and working its way through the shell),
+ commit_resumed_state is true, breaking the contract saying that
+ commit_resumed_state is always false when calling the targets' wait
+ method.
+
+ (note: to be correct, I think that startup_inferior should toggle
+ commit_resumed between the target_wait and target_resume calls, but I'll
+ ignore that for now)
+
+ I can see multiple ways to fix this. In the end, we need
+ commit_resumed_state to be cleared by the time we get to that
+ target_wait. It could be done at the end of the kill command, or at the
+ beginning of the run command.
+
+ To keep things in a coherent state, I'd like to make it so that after
+ the kill command, when the target is left with no threads, its
+ commit_resumed_state flag is left to false. This way, we can keep
+ working with the assumption that a target with no threads (and therefore
+ no running threads) has commit_resumed_state == false.
+
+ Do this by adding a scoped_disable_commit_resumed in target_kill. It
+ clears the target's commit_resumed_state on entry, and leaves it false
+ if the target does not have any resumed thread on exit. That means,
+ even if the target has another inferior with stopped threads,
+ commit_resumed_state will be left to false, which makes sense.
+
+ Add a test that tries to cover various combinations of actions done
+ while an inferior is running (and therefore while commit_resumed_state
+ is true on the process target).
+
+ Bug: https://sourceware.org/bugzilla/show_bug.cgi?id=28275
+ Change-Id: I8e6fe6dc1f475055921520e58cab68024039a1e9
+ Approved-By: Andrew Burgess <aburgess@redhat.com>
+
+2022-11-28 Simon Marchi <simon.marchi@efficios.com>
+
+ gdbserver: switch to right process in find_one_thread
+ New in this version: add a dedicated test.
+
+ When I do this:
+
+ $ ./gdb -nx --data-directory=data-directory -q \
+ /bin/sleep \
+ -ex "maint set target-non-stop on" \
+ -ex "tar ext :1234" \
+ -ex "set remote exec-file /bin/sleep" \
+ -ex "run 1231 &" \
+ -ex add-inferior \
+ -ex "inferior 2"
+ Reading symbols from /bin/sleep...
+ (No debugging symbols found in /bin/sleep)
+ Remote debugging using :1234
+ Starting program: /bin/sleep 1231
+ Reading /lib64/ld-linux-x86-64.so.2 from remote target...
+ warning: File transfers from remote targets can be slow. Use "set sysroot" to access files locally instead.
+ Reading /lib64/ld-linux-x86-64.so.2 from remote target...
+ Reading /usr/lib/debug/.build-id/a6/7a1408f18db3576757eea210d07ba3fc560dff.debug from remote target...
+ [New inferior 2]
+ Added inferior 2 on connection 1 (extended-remote :1234)
+ [Switching to inferior 2 [<null>] (<noexec>)]
+ (gdb) Reading /lib/x86_64-linux-gnu/libc.so.6 from remote target...
+ attach 3659848
+ Attaching to process 3659848
+ /home/smarchi/src/binutils-gdb/gdb/thread.c:85: internal-error: inferior_thread: Assertion `current_thread_ != nullptr' failed.
+
+ Note the "attach" command just above. When doing it on the command-line
+ with a -ex switch, the bug doesn't trigger.
+
+ The internal error of GDB is actually caused by GDBserver crashing, and
+ the error recovery of GDB is not on point. This patch aims to fix just
+ the GDBserver crash, not the GDB problem.
+
+ GDBserver crashes with a segfault here:
+
+ (gdb) bt
+ #0 0x00005555557fb3f4 in find_one_thread (ptid=...) at /home/smarchi/src/binutils-gdb/gdbserver/thread-db.cc:177
+ #1 0x00005555557fd5cf in thread_db_thread_handle (ptid=<error reading variable: Cannot access memory at address 0xffffffffffffffa0>, handle=0x7fffffffc400, handle_len=0x7fffffffc3f0)
+ at /home/smarchi/src/binutils-gdb/gdbserver/thread-db.cc:461
+ #2 0x000055555578a0b6 in linux_process_target::thread_handle (this=0x5555558a64c0 <the_x86_target>, ptid=<error reading variable: Cannot access memory at address 0xffffffffffffffa0>, handle=0x7fffffffc400,
+ handle_len=0x7fffffffc3f0) at /home/smarchi/src/binutils-gdb/gdbserver/linux-low.cc:6905
+ #3 0x00005555556dfcc6 in handle_qxfer_threads_worker (thread=0x60b000000510, buffer=0x7fffffffc8a0) at /home/smarchi/src/binutils-gdb/gdbserver/server.cc:1645
+ #4 0x00005555556e00e6 in operator() (__closure=0x7fffffffc5e0, thread=0x60b000000510) at /home/smarchi/src/binutils-gdb/gdbserver/server.cc:1696
+ #5 0x00005555556f54be in for_each_thread<handle_qxfer_threads_proper(buffer*)::<lambda(thread_info*)> >(struct {...}) (func=...) at /home/smarchi/src/binutils-gdb/gdbserver/gdbthread.h:159
+ #6 0x00005555556e0242 in handle_qxfer_threads_proper (buffer=0x7fffffffc8a0) at /home/smarchi/src/binutils-gdb/gdbserver/server.cc:1694
+ #7 0x00005555556e04ba in handle_qxfer_threads (annex=0x629000000213 "", readbuf=0x621000019100 '\276' <repeats 200 times>..., writebuf=0x0, offset=0, len=4097)
+ at /home/smarchi/src/binutils-gdb/gdbserver/server.cc:1732
+ #8 0x00005555556e1989 in handle_qxfer (own_buf=0x629000000200 "qXfer:threads", packet_len=26, new_packet_len_p=0x7fffffffd630) at /home/smarchi/src/binutils-gdb/gdbserver/server.cc:2045
+ #9 0x00005555556e720a in handle_query (own_buf=0x629000000200 "qXfer:threads", packet_len=26, new_packet_len_p=0x7fffffffd630) at /home/smarchi/src/binutils-gdb/gdbserver/server.cc:2685
+ #10 0x00005555556f1a01 in process_serial_event () at /home/smarchi/src/binutils-gdb/gdbserver/server.cc:4176
+ #11 0x00005555556f4457 in handle_serial_event (err=0, client_data=0x0) at /home/smarchi/src/binutils-gdb/gdbserver/server.cc:4514
+ #12 0x0000555555820f56 in handle_file_event (file_ptr=0x607000000250, ready_mask=1) at /home/smarchi/src/binutils-gdb/gdbsupport/event-loop.cc:573
+ #13 0x0000555555821895 in gdb_wait_for_event (block=1) at /home/smarchi/src/binutils-gdb/gdbsupport/event-loop.cc:694
+ #14 0x000055555581f533 in gdb_do_one_event (mstimeout=-1) at /home/smarchi/src/binutils-gdb/gdbsupport/event-loop.cc:264
+ #15 0x00005555556ec9fb in start_event_loop () at /home/smarchi/src/binutils-gdb/gdbserver/server.cc:3512
+ #16 0x00005555556f0769 in captured_main (argc=4, argv=0x7fffffffe0d8) at /home/smarchi/src/binutils-gdb/gdbserver/server.cc:3992
+ #17 0x00005555556f0e3f in main (argc=4, argv=0x7fffffffe0d8) at /home/smarchi/src/binutils-gdb/gdbserver/server.cc:4078
+
+ The reason is a wrong current process when find_one_thread is called.
+ The current process is the 2nd one, which was just attached. It does
+ not yet have thread_db data (proc->priv->thread_db is nullptr). As we
+ iterate on all threads of all process to fulfull the qxfer:threads:read
+ request, we get to a thread of process 1 for which we haven't read
+ thread_db information yet (lwp_info::thread_known is false), so we get
+ into find_one_thread. find_one_thread uses
+ `current_process ()->priv->thread_db`, assuming the current process
+ matches the ptid passed as a parameter, which is wrong. A segfault
+ happens when trying to dereference that thread_db pointer.
+
+ Fix this by making find_one_thread not assume what the current process /
+ current thread is. If it needs to call into libthread_db, which we know
+ will try to read memory from the current process, then temporarily set
+ the current process.
+
+ In the case where the thread is already know and we return early, we
+ don't need to switch process.
+
+ Add a test to reproduce this specific situation.
+
+ Change-Id: I09b00883e8b73b7e5f89d0f47cb4e9c0f3d6caaa
+ Approved-By: Andrew Burgess <aburgess@redhat.com>
+
+2022-11-28 Tom Tromey <tromey@adacore.com>
+
+ Fix crash in "document" command
+ PR cli/29800 points out that "document" will now crash when the
+ argument is an undefined command. This is a regression due to the
+ "document user-defined aliases" patch.
+
+ Approved-By: Joel Brobecker <brobecker@adacore.com>
+ Reviewed-By: Philippe Waroquiers <philippe.waroquiers@skynet.be>
+ Bug: https://sourceware.org/bugzilla/show_bug.cgi?id=29800
+
+2022-11-28 Tom de Vries <tdevries@suse.de>
+
+ [gdb/testsuite] Fix gdb.opt/solib-intra-step.exp for powerpc64le
+ On powerpc64le-linux, I run into:
+ ...
+ (gdb) PASS: gdb.opt/solib-intra-step.exp: first-hit
+ step^M
+ 28 { /* first-retry */^M
+ (gdb) FAIL: gdb.opt/solib-intra-step.exp: second-hit
+ ...
+
+ It's a bit easier to understand what happens if we do a full stepping session:
+ ...
+ Temporary breakpoint 1, main ()
+ at solib-intra-step-main.c:23
+ 23 shlib_first ();
+ (gdb) step
+ shlib_first () at solib-intra-step-lib.c:29
+ 29 shlib_second (0); /* first-hit */
+ (gdb) step
+ 28 { /* first-retry */
+ (gdb) step
+ 29 shlib_second (0); /* first-hit */
+ (gdb) step
+ shlib_second (dummy=0)
+ at solib-intra-step-lib.c:23
+ 23 abort (); /* second-hit */
+ ...
+ and compare that to the line info:
+ ...
+ CU: solib-intra-step-lib.c:
+ File name Line number Starting address View Stmt
+ solib-intra-step-lib.c 22 0x710 x
+ solib-intra-step-lib.c 23 0x724 x
+ solib-intra-step-lib.c 28 0x740 x
+ solib-intra-step-lib.c 29 0x74c x
+ solib-intra-step-lib.c 28 0x750 x
+ solib-intra-step-lib.c 29 0x758 x
+ solib-intra-step-lib.c 30 0x760 x
+ solib-intra-step-lib.c - 0x77c
+ ...
+
+ So we step from line 29 to line 28, and back to line 29, which is behaviour
+ that matches the line table. The peculiar order is due to using optimization.
+ The problem is that the test-case doesn't expect this order.
+
+ Fix this by allowing this order in the test-case.
+
+ Tested on powerpc64le-linux.
+
+ PR testsuite/29792
+ Bug: https://sourceware.org/bugzilla/show_bug.cgi?id=29792
+
+2022-11-28 Andrew Burgess <aburgess@redhat.com>
+
+ gdb: fix assert when quitting GDB while a thread is stepping
+ This commit addresses one of the issues identified in PR gdb/28275.
+
+ Bug gdb/28275 identifies a number of situations in which this assert:
+
+ Assertion `!proc_target->commit_resumed_state' failed.
+
+ could be triggered. There's actually a number of similar places where
+ this assert is found in GDB, the two of interest in gdb/28275 are in
+ target_wait and target_stop.
+
+ In one of the comments:
+
+ https://sourceware.org/bugzilla/show_bug.cgi?id=28275#c1
+
+ steps to trigger the assertion within target_stop were identified when
+ using a modified version of the gdb.threads/detach-step-over.exp test
+ script.
+
+ In the gdb.threads/detach-step-over.exp test, we attach to a
+ multi-threaded inferior, and continue the inferior in asynchronous
+ (background) mode. Each thread is continuously hitting a conditional
+ breakpoint where the condition is always false. While the inferior is
+ running we detach. The goal is that we detach while GDB is performing a
+ step-over for the conditional breakpoint in at least one thread.
+
+ While detaching, if a step-over is in progress, then GDB has to
+ complete the step over before we can detach. This involves calling
+ target_stop and target_wait (see prepare_for_detach).
+
+ As far as gdb/28275 is concerned, the interesting part here, is the
+ the process_stratum_target::commit_resumed_state variable must be
+ false when target_stop and target_wait are called.
+
+ This is currently ensured because, in detach_command (infrun.c), we
+ create an instance of scoped_disable_commit_resumed, this ensures that
+ when target_detach is called, ::commit_resumed_state will be false.
+
+ The modification to the test that I propose here, and which exposed
+ the bug, is that, instead of using "detach" to detach from the
+ inferior, we instead use "quit". Quitting GDB after attaching to an
+ inferior will cause GDB to first detach, and then exit.
+
+ When we quit GDB we end up calling target_detach via a different code
+ path, the stack looks like:
+
+ #0 target_detach
+ #1 kill_or_detach
+ #2 quit_force
+ #3 quit_command
+
+ Along this path there is no scoped_disable_commit_resumed created.
+ ::commit_resumed_state can be true when we reach prepare_for_detach,
+ which calls target_wait and target_stop, so the assertion will trigger.
+
+ In this commit, I propose fixing this by adding the creation of a
+ scoped_disable_commit_resumed into target_detach. This will ensure
+ that ::commit_resumed_state is false when calling prepare_for_detach
+ from within target_detach.
+
+ I did consider placing the scoped_disable_commit_resumed in
+ prepare_for_detach, however, placing it in target_detach ensures that
+ the target's commit_resumed_state flag is left to false if the detached
+ inferior was the last one for that target. It's the same rationale as
+ for patch "gdb: disable commit resumed in target_kill" that comes later
+ in this series, but for detach instead of kill.
+
+ detach_command still includes a scoped_disable_commit_resumed too, but I
+ think it is still relevant to cover the resumption at the end of the
+ function.
+
+ Co-Authored-By: Simon Marchi <simon.marchi@efficios.com>
+ Bug: https://sourceware.org/bugzilla/show_bug.cgi?id=28275
+ Change-Id: Ie128f7aba6ef0e018859275eca372e6ea738e96f
+
+2022-11-28 Andrew Burgess <aburgess@redhat.com>
+
+ gdb/testsuite: refactor gdb.threads/detach-step-over.exp
+ Factor out some bits of gdb.threads/detach-step-over.exp to procs in
+ preparation to adding some new variations of the test. Rename the
+ existing "test" proc and make it use proc_with_prefix.
+
+ Co-Authored-By: Simon Marchi <simon.marchi@efficios.com>
+ Change-Id: Ib4412545c81c8556029e0f7bfa9dd48d7a9f3189
+
+2022-11-28 Simon Marchi <simon.marchi@efficios.com>
+
+ gdb/testsuite: remove global declarations in gdb.threads/detach-step-over.exp
+ Before doing further changes to this file, change to use the :: notation
+ instead of declaring global variables with the `global` keyword.
+
+ Change-Id: I72301fd8f4693fea61aac054ba17245a1f4442fb
+ Approved-By: Andrew Burgess <aburgess@redhat.com>
+
+2022-11-28 Tom de Vries <tdevries@suse.de>
+
+ [gdb/testsuite] Fix gdb.arch/altivec-regs.exp with gcc 4.8.5
+ On powerpc64le-linux, using gcc 4.8.5, I run into:
+ ...
+ (gdb) PASS: gdb.arch/altivec-regs.exp: next (1)
+ next^M
+ 11 c = vec_add (a, b);^M
+ (gdb) PASS: gdb.arch/altivec-regs.exp: next (2)
+ print/x a^M
+ $67 = {0xfefefefe, 0xfefefefe, 0xfefefefe, 0xfefefefe}^M
+ (gdb) FAIL: gdb.arch/altivec-regs.exp: print vector parameter a
+ ...
+
+ Looking at the disassembly and the debug info, it's clear why there's
+ a FAIL.
+
+ The debug info says that the variable can be found at some stack location, but
+ the instructions don't seem to be writing there.
+
+ We can work around this by marking variable a volatile. Likewise for b.
+
+ Note that marking the variables as volatile doesn't change the location
+ information.
+
+ Tested on power64le-linux.
+
+2022-11-28 Tom de Vries <tdevries@suse.de>
+
+ [gdb/tdep] Fix gdb.base/msym-bp-shl.exp for ppc64le
+ With test-case gdb.base/msym-bp-shl.exp on powerpc64le-linux, I run into:
+ ...
+ (gdb) PASS: gdb.base/msym-bp-shl.exp: debug=0: before run: break foo
+ info breakpoint^M
+ Num Type Disp Enb Address What^M
+ 1 breakpoint keep y <MULTIPLE> ^M
+ 1.1 y 0x00000000000008d4 <foo+12>^M
+ 1.2 y 0x0000000000000a34 crti.S:88^M
+ (gdb) FAIL: gdb.base/msym-bp-shl.exp: debug=0: before run: info breakpoint
+ ...
+
+ The problem is that the prologue skipper walks from foo@plt at 0xa28 to 0xa34:
+ ...
+ 0000000000000a28 <foo@plt>:
+ a28: c0 ff ff 4b b 9e8 <__glink_PLTresolve>
+
+ Disassembly of section .fini:
+
+ 0000000000000a2c <_fini>:
+ a2c: 02 00 4c 3c addis r2,r12,2
+ a30: d4 74 42 38 addi r2,r2,29908
+ a34: a6 02 08 7c mflr r0
+ ...
+
+ This is caused by ppc_elfv2_elf_make_msymbol_special which marks foo@plt as
+ having a local entry point, due to incorrectly accessing an asymbol struct
+ using a (larger) elf_symbol_type.
+
+ Fix this by simply ignoring artificial symbols in
+ ppc_elfv2_elf_make_msymbol_special.
+
+ Tested on powerpc64le.
+
+ Approved-By: Ulrich Weigand <uweigand@de.ibm.com>
+ Reviewed-By: Carl Love <cel@us.ibm.com>
+ Tested-By: Carl Love <cel@us.ibm.com>
+ PR tdep/29814
+ Bug: https://sourceware.org/bugzilla/show_bug.cgi?id=29814
+
+2022-11-28 Alan Modra <amodra@gmail.com>
+
+ PR10368, ISO 8859 mentioned as 7bit encoding in strings documentation
+ PR 10368
+ * doc/binutils.texi (strings): Delete example of 7-bit encoding.
+
+ Use bfd_rename_section in msp430.em
+ * emultempl/msp430.em (add_region_prefix <REGION_EITHER>): Use
+ bfd_rename_section.
+ * testsuite/ld-msp430-elf/msp430-tiny-rom.ld: Handle varian data
+ and bss input sections.
+
+ asan: pef: buffer overflow
+ * pef.c (bfd_pef_parse_traceback_table): Correct size moved when
+ stripping leading dot.
+
+ regen gas/Makefile.in
+
+2022-11-28 Tsukasa OI <research_trasio@irq.a4lg.com>
+
+ RISC-V: Allow merging 'H' extension
+ Because riscv_merge_std_ext function did not merge the 'H' extension, linked
+ executables lacked 'H' extension when multiple objects are merged.
+
+ This issue is found while building OpenSBI with 'H' extension (resulting
+ ELF files did not contain "h1p0" in "Tag_RISCV_arch" even if *all* linked
+ object files contained it).
+
+ This commit adds 'h' to standard_exts variable to merge 'H' extension.
+
+ bfd/ChangeLog:
+
+ * elfnn-riscv.c (riscv_merge_std_ext): Add 'H' extension merging.
+
+2022-11-28 Tsukasa OI <research_trasio@irq.a4lg.com>
+
+ RISC-V: Better support for long instructions (tests)
+ This commit tests both (assembler and disassembler) fixes of "Better support
+ for long instructions".
+
+ gas/ChangeLog:
+
+ * testsuite/gas/riscv/insn.s: Add testcases such that big number
+ handling is required and should be disassembled as long ".byte"
+ sequence with correct instruction bits.
+ * testsuite/gas/riscv/insn.d: Likewise.
+ * testsuite/gas/riscv/insn-na.d: Likewise.
+ * testsuite/gas/riscv/insn-dwarf.d: Likewise.
+
+2022-11-28 Tsukasa OI <research_trasio@irq.a4lg.com>
+
+ RISC-V: Better support for long instructions (assembler)
+ Commit bb996692bd96 ("RISC-V/gas: allow generating up to 176-bit
+ instructions with .insn") tried to start supporting long instructions but
+ it was insufficient.
+
+ 1. It heavily depended on the bignum internals (radix of 2^16),
+ 2. It generates "value conflicts with instruction length" even if a big
+ number instruction encoding does not exceed its expected length and
+ 3. Because long opcode was handled separately (from struct riscv_cl_insn),
+ some information like DWARF line number correspondence was missing.
+
+ To resolve these problems, this commit:
+
+ 1. Handles bignum (and its encodings) precisely and
+ 2. Incorporates long opcode handling into regular instruction handling.
+
+ This commit will be tested on the separate commit.
+
+ gas/ChangeLog:
+
+ * config/tc-riscv.c (struct riscv_cl_insn): Add long opcode field.
+ (create_insn) Clear long opcode marker.
+ (install_insn) Install longer opcode as well.
+ (s_riscv_insn) Likewise.
+ (riscv_ip_hardcode): Make big number handling stricter. Length and
+ the value conflicts only if the bignum size exceeds the expected
+ maximum length.
+
+2022-11-28 Tsukasa OI <research_trasio@irq.a4lg.com>
+
+ RISC-V: Better support for long instructions (disassembler)
+ Commit bb996692bd96 ("RISC-V/gas: allow generating up to 176-bit
+ instructions with .insn") tried to start supporting long instructions but
+ it was insufficient.
+
+ On the disassembler, correct ".byte" output was limited to the first 64-bits
+ of an instruction. After that, zeroes are incorrectly printed.
+
+ Note that, it only happens on ".byte" output (instruction part) and not on
+ hexdump (data) part. For example, before this commit, hexdump and ".byte"
+ produces different values:
+
+ Assembly:
+ .insn 22, 0xfedcba98765432100123456789abcdef55aa33cc607f
+ objdump output example (before the fix):
+ 10: 607f 33cc 55aa cdef .byte 0x7f, 0x60, 0xcc, 0x33, 0xaa, 0x55, 0xef, 0xcd, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00
+ 18: 89ab 4567 0123 3210
+ 20: 7654 ba98 fedc
+
+ Note that, after 0xcd (after first 64-bits of the target instruction), all
+ ".byte" values are incorrectly printed as zero while hexdump prints correct
+ instruction bits.
+
+ To resolve this, this commit adds "packet" argument to support dumping
+ instructions longer than 64-bits (to print correct instruction bits on
+ ".byte"). This commit will be tested on the separate commit.
+
+ Assembly:
+ .insn 22, 0xfedcba98765432100123456789abcdef55aa33cc607f
+ objdump output example (after the fix):
+ 10: 607f 33cc 55aa cdef .byte 0x7f, 0x60, 0xcc, 0x33, 0xaa, 0x55, 0xef, 0xcd, 0xab, 0x89, 0x67, 0x45, 0x23, 0x01, 0x10, 0x32, 0x54, 0x76, 0x98, 0xba, 0xdc, 0xfe
+ 18: 89ab 4567 0123 3210
+ 20: 7654 ba98 fedc
+
+ opcodes/ChangeLog:
+
+ * riscv-dis.c (riscv_disassemble_insn): Print unknown instruction
+ using the new argument packet.
+ (riscv_disassemble_data): Add unused argument packet.
+ (print_insn_riscv): Pass packet to the disassemble function.
+
+2022-11-28 GDB Administrator <gdbadmin@sourceware.org>
+
+ Automatic date update in version.in
+
+2022-11-27 Philippe Waroquiers <philippe.waroquiers@skynet.be>
+
+ Fix leak in the dwarf reader
+ Valgrind reports a leak in the dwarf reader (see details below).
+ The function dw2_get_file_names_reader is interning in the per_objfile
+ all the file names it finds, except the name of 'fnd file name and directory'.
+ Instead, it was xstrdup-ing the name.
+ Fix the leaks by also interning the name.
+
+ This was validated running the tests natively, and under valgrind.
+ Leaks have decreased as mentionned below.
+ Valgrind detected no error such as double free or use after free.
+
+ Stack trace of the leak:
+ ==4113266== 490,735 bytes in 17,500 blocks are definitely lost in loss record 7,061 of 7,074
+ ==4113266== at 0x483979B: malloc (vg_replace_malloc.c:393)
+ ==4113266== by 0x25A454: xmalloc (alloc.c:57)
+ ==4113266== by 0x7D1E1E: xstrdup (xstrdup.c:34)
+ ==4113266== by 0x39D141: dw2_get_file_names_reader (read.c:2825)
+ ==4113266== by 0x39D141: dw2_get_file_names(dwarf2_per_cu_data*, dwarf2_per_objfile*) (read.c:2851)
+ ==4113266== by 0x39DD6C: dw_expand_symtabs_matching_file_matcher(dwarf2_per_objfile*, gdb::function_view<bool (char const*, bool)>) (read.c:4149)
+ ==4113266== by 0x3BC8B5: cooked_index_functions::expand_symtabs_matching(objfile*, gdb::function_view<bool (char const*, bool)>, lookup_name_info const*, gdb::function_view<bool (char const*)>, gdb::function_view<bool (compunit_symtab*)>, enum_flags<block_search_flag_values>, domain_enum, search_domain) (read.c:18688)
+ ==4113266== by 0x5DD1EA: objfile::map_symtabs_matching_filename(char const*, char const*, gdb::function_view<bool (symtab*)>) (symfile-debug.c:207)
+ ==4113266== by 0x5F04CC: iterate_over_symtabs(char const*, gdb::function_view<bool (symtab*)>) (symtab.c:633)
+ ==4113266== by 0x477EE3: collect_symtabs_from_filename(char const*, program_space*) (linespec.c:3712)
+ ==4113266== by 0x477FC1: symtabs_from_filename(char const*, program_space*) (linespec.c:3726)
+ ==4113266== by 0x47A9B8: convert_explicit_location_spec_to_linespec(linespec_state*, linespec*, char const*, char const*, symbol_name_match_type, char const*, line_offset) (linespec.c:2329)
+ ==4113266== by 0x47E86E: convert_explicit_location_spec_to_sals (linespec.c:2388)
+ ==4113266== by 0x47E86E: location_spec_to_sals(linespec_parser*, location_spec const*) (linespec.c:3104)
+ ==4113266== by 0x47EDAC: decode_line_full(location_spec*, int, program_space*, symtab*, int, linespec_result*, char const*, char const*) (linespec.c:3149)
+ ...
+
+ Without the fix, the top 10 leaks are:
+ ./gdb/testsuite/outputs/gdb.base/condbreak-bad/gdb.log:345:==3213924== definitely lost: 130,937 bytes in 5,409 blocks
+ ./gdb/testsuite/outputs/gdb.base/hbreak2/gdb.log:619:==3758919== definitely lost: 173,323 bytes in 7,204 blocks
+ ./gdb/testsuite/outputs/gdb.mi/mi-var-cp/gdb.log:1320:==4152873== definitely lost: 172,826 bytes in 7,207 blocks
+ ./gdb/testsuite/outputs/gdb.base/advance-until-multiple-locations/gdb.log:398:==2992643== definitely lost: 172,965 bytes in 7,211 blocks
+ ./gdb/testsuite/outputs/gdb.mi/mi-var-cmd/gdb.log:2302:==4159476== definitely lost: 173,129 bytes in 7,211 blocks
+ ./gdb/testsuite/outputs/gdb.cp/gdb2384/gdb.log:222:==3811851== definitely lost: 218,106 bytes in 7,761 blocks
+ ./gdb/testsuite/outputs/gdb.cp/mb-templates/gdb.log:310:==3787344== definitely lost: 290,311 bytes in 10,340 blocks
+ ./gdb/testsuite/outputs/gdb.mi/mi-var-rtti/gdb.log:2568:==4158350== definitely lost: 435,427 bytes in 15,507 blocks
+ ./gdb/testsuite/outputs/gdb.mi/mi-catch-cpp-exceptions/gdb.log:1704:==4119722== definitely lost: 435,405 bytes in 15,510 blocks
+ ./gdb/testsuite/outputs/gdb.mi/mi-vla-fortran/gdb.log:768:==4113266== definitely lost: 508,585 bytes in 18,109 blocks
+
+ With the fix:
+ ./gdb/testsuite/outputs/gdb.base/fork-running-state/gdb.log:1536:==2924193== indirectly lost: 13,848 bytes in 98 blocks
+ ./gdb/testsuite/outputs/gdb.base/fork-running-state/gdb.log:1675:==2928777== indirectly lost: 13,848 bytes in 98 blocks
+ ./gdb/testsuite/outputs/gdb.python/py-inferior-leak/gdb.log:4729:==3353335== definitely lost: 3,360 bytes in 140 blocks
+ ./gdb/testsuite/outputs/gdb.base/kill-detach-inferiors-cmd/gdb.log:210:==2746927== indirectly lost: 13,246 bytes in 154 blocks
+ ./gdb/testsuite/outputs/gdb.base/inferior-clone/gdb.log:179:==3034984== indirectly lost: 12,921 bytes in 161 blocks
+ ./gdb/testsuite/outputs/gdb.base/interrupt-daemon/gdb.log:209:==3006248== indirectly lost: 20,683 bytes in 174 blocks
+ ./gdb/testsuite/outputs/gdb.threads/watchpoint-fork/gdb.log:714:==3512403== indirectly lost: 20,707 bytes in 175 blocks
+ ./gdb/testsuite/outputs/gdb.threads/watchpoint-fork/gdb.log:962:==3514498== indirectly lost: 20,851 bytes in 178 blocks
+ ./gdb/testsuite/outputs/gdb.base/multi-forks/gdb.log:336:==2585839== indirectly lost: 53,630 bytes in 386 blocks
+ ./gdb/testsuite/outputs/gdb.base/multi-forks/gdb.log:1338:==2592417== indirectly lost: 100,008 bytes in 1,154 blocks
+
+ Approved-By: Simon Marchi <simon.marchi@efficios.com>
+
+2022-11-27 Philippe Waroquiers <philippe.waroquiers@skynet.be>
+
+ fix leak in gdb_environ
+ valgrind reports a leak when assigning a gdb_environ to another gdb_environ.
+ The memory allocated for the target gdb_environ env variables is not released.
+ The gdb_environ selftest reproduces the leak (see below).
+ Fix the leak by clearing the target gdb_environ before std::move-ing the
+ members.
+
+ Tested natively and re-running all tests under valgrind.
+
+ ==3261873== 4,842 bytes in 69 blocks are definitely lost in loss record 6,772 of 6,839
+ ==3261873== at 0x483979B: malloc (vg_replace_malloc.c:393)
+ ==3261873== by 0x25A454: xmalloc (alloc.c:57)
+ ==3261873== by 0x7D1E4E: xstrdup (xstrdup.c:34)
+ ==3261873== by 0x7E2A51: gdb_environ::from_host_environ() (environ.cc:56)
+ ==3261873== by 0x66F1C8: test_reinit_from_host_environ (environ-selftests.c:78)
+ ==3261873== by 0x66F1C8: selftests::gdb_environ_tests::run_tests() (environ-selftests.c:285)
+ ==3261873== by 0x7EFC43: operator() (std_function.h:622)
+ =
+
+ Approved-By: Simon Marchi <simon.marchi@efficios.com>
+
+2022-11-27 Philippe Waroquiers <philippe.waroquiers@skynet.be>
+
+ Use false/true for some inferior class members instead of 0/1
+ Some class members were changed to bool, but there was
+ still some assignments or comparisons using 0/1.
+
+ Approved-By: Simon Marchi <simon.marchi@efficios.com>
+
+2022-11-27 Tom de Vries <tdevries@suse.de>
+
+ [gdb/server] Emit warning for SIGINT failure
+ Consider the executable from test-case gdb.base/interrupt-daemon.exp.
+
+ When starting it using gdbserver:
+ ...
+ $ ./build/gdbserver/gdbserver localhost:2345 \
+ ./outputs/gdb.base/interrupt-daemon/interrupt-daemon
+ ...
+ and connecting to it using gdb:
+ ...
+ $ gdb -q -ex "target remote localhost:2345" \
+ -ex "set follow-fork-mode child" \
+ -ex "break daemon_main" -ex cont
+ ...
+ we are setup to do the same as in the test-case: interrupt a running inferior
+ using ^C.
+
+ So let's try:
+ ...
+ (gdb) continue
+ Continuing.
+ ^C
+ ...
+ After pressing ^C, nothing happens. This a known problem, filed as
+ PR remote/18772.
+
+ The problem is that in linux_process_target::request_interrupt, a kill is used
+ to send a SIGINT, but it fails. And it fails silently.
+
+ Make the failure verbose by adding a warning, such that the gdbserver output
+ becomes more helpful:
+ ...
+ Process interrupt-daemon created; pid = 15068
+ Listening on port 2345
+ Remote debugging from host ::1, port 35148
+ Detaching from process 15068
+ Detaching from process 15085
+ gdbserver: Sending SIGINT to process group of pid 15068 failed: \
+ No such process
+ ...
+
+ Note that the failure can easily be reproduced using the test-case and target
+ board native-gdbserver:
+ ...
+ (gdb) continue^M
+ Continuing.^M
+ PASS: gdb.base/interrupt-daemon.exp: fg: continue
+ ^CFAIL: gdb.base/interrupt-daemon.exp: fg: ctrl-c stops process (timeout)
+ ...
+ as reported in PR server/23382.
+
+ Tested on x86_64-linux.
+ Approved-By: Simon Marchi <simon.marchi@efficios.com>
+
+2022-11-27 GDB Administrator <gdbadmin@sourceware.org>
+
+ Automatic date update in version.in
+
+2022-11-26 Tom de Vries <tdevries@suse.de>
+
+ [gdb/testsuite] Don't generate core in gdb.base/bt-on-fatal-signal.exp
+ When running test-case gdb.base/bt-on-fatal-signal.exp on powerpc64le-linux I
+ noticed:
+ ...
+ FAIL: gdb.base/bt-on-fatal-signal.exp: SEGV: scan for backtrace (timeout)
+ ...
+
+ The timeout is 10 seconds, but generating the core file takes more than a
+ minute, probably due to slow NFS.
+
+ I managed to reproduce this behaviour independently of gdb, by compiling
+ "int main (void) { __builtin_abort (); }" and running it, which took 1.5
+ seconds for a core file 50 times smaller than the one for gdb.
+
+ Fix this by preventing the core file from being generated, using a wrapper
+ around gdb that does "ulimit -c 0".
+
+ Tested on x86_64-linux.
+
+2022-11-26 Tom de Vries <tdevries@suse.de>
+
+ [gdb/symtab] Handle failure to open .gnu_debugaltlink file
+ If we instrument cc-with-tweaks.sh to remove the .gnu_debugaltlink file after
+ dwz has created it, with test-case
+ gdb.threads/access-mem-running-thread-exit.exp and target board cc-with-dwz-m
+ we run into:
+ ...
+ (gdb) file access-mem-running-thread-exit^M
+ Reading symbols from access-mem-running-thread-exit...^M
+ could not find '.gnu_debugaltlink' file for access-mem-running-thread-exit^M
+ ...
+ followed a bit later by:
+ ...
+ (gdb) file access-mem-running-thread-exit^M
+ Reading symbols from access-mem-running-thread-exit...^M
+ gdb/dwarf2/read.c:7284: internal-error: create_all_units: \
+ Assertion `per_objfile->per_bfd->all_units.empty ()' failed.^M
+ ...
+
+ The problem is that create_units does not catch the error thrown by
+ dwarf2_get_dwz_file.
+
+ Fix this by catching the error and performing the necessary cleanup, getting
+ the same result for the first and second file command.
+
+ PR symtab/29805
+ Bug: https://sourceware.org/bugzilla/show_bug.cgi?id=29805
+
+2022-11-26 Philippe Waroquiers <philippe.waroquiers@skynet.be>
+
+ Fix jump on uninit producer_is_clang bit of cu.h dwarf2_cu struct.
+ Valgrind reports a "jump on unitialised bit error" when running
+ e.g. gdb.base/macro-source-path.exp (see details below).
+
+ Fix this by initializing producer_is_clang member variable of dwarf2_cu.
+
+ Tested on amd64/debian11 and re-running gdb.base/macro-source-path.exp
+ under valgrind.
+
+ ==2140965== Conditional jump or move depends on uninitialised value(s)
+ ==2140965== at 0x5211F7: dwarf_decode_macro_bytes(dwarf2_per_objfile*, buildsym_compunit*, bfd*, unsigned char const*, unsigned char const*, macro_source_file*, line_header const*, dwarf2_section_info const*, int, int, unsigned int, dwarf2_section_info*, dwarf2_section_info*, gdb::optional<unsigned long>, htab*, dwarf2_cu*) (macro.c:676)
+ ==2140965== by 0x52158A: dwarf_decode_macros(dwarf2_per_objfile*, buildsym_compunit*, dwarf2_section_info const*, line_header const*, unsigned int, unsigned int, dwarf2_section_info*, dwarf2_section_info*, gdb::optional<unsigned long>, int, dwarf2_cu*) (macro.c:967)
+ ==2140965== by 0x523BC4: dwarf_decode_macros(dwarf2_cu*, unsigned int, int) (read.c:23379)
+ ==2140965== by 0x552AB5: read_file_scope(die_info*, dwarf2_cu*) (read.c:9687)
+ ==2140965== by 0x54F7B2: process_die(die_info*, dwarf2_cu*) (read.c:8660)
+ ==2140965== by 0x5569C7: process_full_comp_unit (read.c:8429)
+ ==2140965== by 0x5569C7: process_queue (read.c:7675)
+ ==2140965== by 0x5569C7: dw2_do_instantiate_symtab (read.c:2063)
+ ==2140965== by 0x5569C7: dw2_instantiate_symtab(dwarf2_per_cu_data*, dwarf2_per_objfile*, bool) (read.c:2085)
+ ==2140965== by 0x55700B: dw2_expand_symtabs_matching_one(dwarf2_per_cu_data*, dwarf2_per_objfile*, gdb::function_view<bool (char const*, bool)>, gdb::function_view<bool (compunit_symtab*)>) (read.c:3984)
+ ==2140965== by 0x557EA3: cooked_index_functions::expand_symtabs_matching(objfile*, gdb::function_view<bool (char const*, bool)>, lookup_name_info const*, gdb::function_view<bool (char const*)>, gdb::function_view<bool (compunit_symtab*)>, enum_flags<block_search_flag_values>, domain_enum, search_domain) (read.c:18781)
+ ==2140965== by 0x778977: objfile::lookup_symbol(block_enum, char const*, domain_enum) (symfile-debug.c:276)
+ ....
+ ==2140965== Uninitialised value was created by a heap allocation
+ ==2140965== at 0x4839F01: operator new(unsigned long) (vg_replace_malloc.c:434)
+ ==2140965== by 0x533A64: cutu_reader::cutu_reader(dwarf2_per_cu_data*, dwarf2_per_objfile*, abbrev_table*, dwarf2_cu*, bool, abbrev_cache*) (read.c:6264)
+ ==2140965== by 0x5340C2: load_full_comp_unit(dwarf2_per_cu_data*, dwarf2_per_objfile*, dwarf2_cu*, bool, language) (read.c:7729)
+ ==2140965== by 0x548338: load_cu(dwarf2_per_cu_data*, dwarf2_per_objfile*, bool) (read.c:2021)
+ ==2140965== by 0x55634C: dw2_do_instantiate_symtab (read.c:2048)
+ ==2140965== by 0x55634C: dw2_instantiate_symtab(dwarf2_per_cu_data*, dwarf2_per_objfile*, bool) (read.c:2085)
+ ==2140965== by 0x55700B: dw2_expand_symtabs_matching_one(dwarf2_per_cu_data*, dwarf2_per_objfile*, gdb::function_view<bool (char const*, bool)>, gdb::function_view<bool (compunit_symtab*)>) (read.c:3984)
+ ==2140965== by 0x557EA3: cooked_index_functions::expand_symtabs_matching(objfile*, gdb::function_view<bool (char const*, bool)>, lookup_name_info const*, gdb::function_view<bool (char const*)>, gdb::function_view<bool (compunit_symtab*)>, enum_flags<block_search_flag_values>, domain_enum, search_domain) (read.c:18781)
+ ==2140965== by 0x778977: objfile::lookup_symbol(block_enum, char const*, domain_enum) (symfile-debug.c:276)
+ ....
+
+2022-11-26 Philippe Waroquiers <philippe.waroquiers@skynet.be>
+
+ remove the declared but undefined/unused method find_partial_die
+ The method
+ struct partial_die_info *find_partial_die (sect_offset sect_off);
+ in cu.h is defined, but is used nowhere and not implemented.
+
+2022-11-26 GDB Administrator <gdbadmin@sourceware.org>
+
+ Automatic date update in version.in
+
+2022-11-25 Martin Liska <mliska@suse.cz>
+
+ Revert "readelf: Do not require EI_OSABI for IFUNC."
+ This reverts commit ffbbab0b3a1000f862b6d4ce3d9a76ed14f08801.
+
+2022-11-25 Christoph Müllner <christoph.muellner@vrull.eu>
+
+ riscv: Add AIA extension support (Smaia, Ssaia)
+ This commit adds the AIA extensions (Smaia and Ssaia) CSRs.
+
+ bfd/ChangeLog:
+
+ * elfxx-riscv.c: Add 'smaia' and 'ssaia' to the list
+ of known standard extensions.
+
+ gas/ChangeLog:
+
+ * config/tc-riscv.c (enum riscv_csr_class):
+ (riscv_csr_address): Add CSR classes for Smaia/Ssaia.
+ * testsuite/gas/riscv/csr-dw-regnums.d: Add new CSRs.
+ * testsuite/gas/riscv/csr-dw-regnums.s: Likewise.
+ * testsuite/gas/riscv/csr-version-1p10.d: Likewise.
+ * testsuite/gas/riscv/csr-version-1p10.l: Likewise.
+ * testsuite/gas/riscv/csr-version-1p11.d: Likewise.
+ * testsuite/gas/riscv/csr-version-1p11.l: Likewise.
+ * testsuite/gas/riscv/csr-version-1p12.d: Likewise.
+ * testsuite/gas/riscv/csr-version-1p12.l: Likewise.
+ * testsuite/gas/riscv/csr-version-1p9p1.d: Likewise.
+ * testsuite/gas/riscv/csr-version-1p9p1.l: Likewise.
+ * testsuite/gas/riscv/csr.s: Likewise.
+
+ include/ChangeLog:
+
+ * opcode/riscv-opc.h (CSR_MISELECT): New CSR macro.
+ (CSR_MIREG): Likewise.
+ (CSR_MTOPEI): Likewise.
+ (CSR_MTOPI): Likewise.
+ (CSR_MVIEN): Likewise.
+ (CSR_MVIP): Likewise.
+ (CSR_MIDELEGH): Likewise.
+ (CSR_MIEH): Likewise.
+ (CSR_MVIENH): Likewise.
+ (CSR_MVIPH): Likewise.
+ (CSR_MIPH): Likewise.
+ (CSR_SISELECT): Likewise.
+ (CSR_SIREG): Likewise.
+ (CSR_STOPEI): Likewise.
+ (CSR_STOPI): Likewise.
+ (CSR_SIEH): Likewise.
+ (CSR_SIPH): Likewise.
+ (CSR_HVIEN): Likewise.
+ (CSR_HVICTL): Likewise.
+ (CSR_HVIPRIO1): Likewise.
+ (CSR_HVIPRIO2): Likewise.
+ (CSR_VSISELECT): Likewise.
+ (CSR_VSIREG): Likewise.
+ (CSR_VSTOPEI): Likewise.
+ (CSR_VSTOPI): Likewise.
+ (CSR_HIDELEGH): Likewise.
+ (CSR_HVIENH): Likewise.
+ (CSR_HVIPH): Likewise.
+ (CSR_HVIPRIO1H): Likewise.
+ (CSR_HVIPRIO2H): Likewise.
+ (CSR_VSIEH): Likewise.
+ (CSR_VSIPH): Likewise.
+ (DECLARE_CSR): Add CSRs for Smaia and Ssaia.
+
+ Changes for v3:
+ - Imply ssaia for smaia
+ - Imply zicsr for ssaia (and transitively smaia)
+ - Move hypervisor CSRs to Ssaia+H
+ - Rebase on upstream/master
+
+ Changes for v2:
+ - Add hypervisor and VS CSRs
+ - Fix whitespace issue
+
+2022-11-25 GDB Administrator <gdbadmin@sourceware.org>
+
+ Automatic date update in version.in
+
+2022-11-24 Indu Bhagat <indu.bhagat@oracle.com>
+
+ sframe/doc: remove usage of xrefautomaticsectiontitle
+ xrefautomaticsectiontitle appears to be available from texinfo 5.0 or
+ greater. As such, it is not worthwhile to add requirement for a minimum
+ necessary makeinfo version. So remove the usage of it.
+
+ Also align node name with section title where possible.
+
+ ChangeLog:
+
+ * libsframe/doc/sframe-spec.texi: Remove usage of
+ xrefautomaticsectiontitle.
+
+2022-11-24 Andrew Burgess <aburgess@redhat.com>
+
+ gdb: fix typo in debug output message
+ Spotted a minor type, a missing ')', in a debug message.
+
+2022-11-24 Simon Marchi <simon.marchi@polymtl.ca>
+
+ gdb/testsuite/gdb.base/break.exp: split test_break
+ Move all the remaining tests to a single test_break proc. It's a bit
+ big, but all of these are kind of tied together. The procs starts by
+ setting breakpoints, checks that we can see them in "info breakpoints",
+ and tries stopping on them.
+
+ Move all the "set bp_locationX" calls together at the top.
+
+ Change-Id: Id05f98957e1a3462532d2dbd577cd0a7c7263900
+ Approved-By: Kevin Buettner <kevinb@redhat.com>
+
+2022-11-24 Simon Marchi <simon.marchi@polymtl.ca>
+
+ gdb/testsuite/gdb.base/break.exp: split test_tbreak
+ Leave setting bp_location11 in the global scope, so that it's accessible
+ to other procs.
+
+ Change-Id: I8928f01640d3a1e993649b2168b9eda0724ee1d9
+ Approved-By: Kevin Buettner <kevinb@redhat.com>
+
+2022-11-24 Simon Marchi <simon.marchi@polymtl.ca>
+
+ gdb/testsuite/gdb.base/break.exp: split test_no_break_on_catchpoint
+ Change-Id: Ifa7070943f1de22c2839fedf5f346d6591bb5a76
+ Approved-By: Kevin Buettner <kevinb@redhat.com>
+
+ gdb/testsuite/gdb.base/break.exp: split test_break_nonexistent_line
+ Change-Id: I4390dd5da23bae83ccc513ad0de0169ddff7df12
+ Approved-By: Kevin Buettner <kevinb@redhat.com>
+
+2022-11-24 Simon Marchi <simon.marchi@polymtl.ca>
+
+ gdb/testsuite/gdb.base/break.exp: split test_break_default
+ One special thing here is that the part just above this one, that sets
+ catchpoints and verifies they are not hit, requires that we resume
+ execution to verify that the catchpoints are indeed not hit. I guess
+ it was previously achieved by the until command, but it doesn't happen
+ now that the until is moved into test_break_default. Add a
+ gdb_continue_to_end after setting the catchpoints. If any catchpoint
+ were to be hit, it would catch the problem.
+
+ Change-Id: I5d4b43da91886b1beda9f6e56b05aa04331a9c05
+ Approved-By: Kevin Buettner <kevinb@redhat.com>
+
+2022-11-24 Simon Marchi <simon.marchi@polymtl.ca>
+
+ gdb/testsuite/gdb.base/break.exp: split test_break_silent_and_more
+ This one is a bit tricky. The clear tests seem to depend on the various
+ breakpoints that have been set before, starting with the "silent"
+ breakpoints. So, move all this in a single chunk, it can always be
+ split later if needed.
+
+ Change-Id: I7ba61a5b130ade63eda0c4790534840339f8a72f
+ Approved-By: Kevin Buettner <kevinb@redhat.com>
+
+2022-11-24 Simon Marchi <simon.marchi@polymtl.ca>
+
+ gdb/testsuite/gdb.base/break.exp: split test_break_line_convenience_var
+ Change-Id: I593002373da971a0a4d6b5355d3fe321873479ab
+ Approved-By: Kevin Buettner <kevinb@redhat.com>
+
+ gdb/testsuite/gdb.base/break.exp: split test_break_user_call
+ Change-Id: I9151ce9db9435722b758f41c6606b461bf15f320
+ Approved-By: Kevin Buettner <kevinb@redhat.com>
+
+ gdb/testsuite/gdb.base/break.exp: split test_finish_arguments
+ Change-Id: Id84babed1eeb3ce7d14b94ff332795964e8ead51
+ Approved-By: Kevin Buettner <kevinb@redhat.com>
+
+2022-11-24 Simon Marchi <simon.marchi@polymtl.ca>
+
+ gdb/testsuite/gdb.base/break.exp: use proc_with_prefix for test_next_with_recursion
+ This one is already in a proc, just make the proc use proc_with_prefix,
+ for consistency.
+
+ Change-Id: I313ecf5097ff04526c29396529baeba84e37df5a
+ Approved-By: Kevin Buettner <kevinb@redhat.com>
+
+2022-11-24 Simon Marchi <simon.marchi@polymtl.ca>
+
+ gdb/testsuite/gdb.base/break.exp: split test_break_optimized_prologue
+ Change-Id: Ibf17033c8ce72aa5cfe1b739be2902e84a5e945d
+ Approved-By: Kevin Buettner <kevinb@redhat.com>
+
+ gdb/testsuite/gdb.base/break.exp: split test_rbreak_shlib
+ Change-Id: I130e8914c2713095aab03e84aba1481b4c7af978
+ Approved-By: Kevin Buettner <kevinb@redhat.com>
+
+ gdb/testsuite/gdb.base/break.exp: split test_break_file_line_convenience_var
+ Change-Id: I0c31b037669b2917e062bf431372fb6531f8f53c
+ Approved-By: Kevin Buettner <kevinb@redhat.com>
+
+ gdb/testsuite/gdb.base/break.exp: split test_break_commands_clear
+ Change-Id: Ia58f90117d52fc419fc494836d9b4ed5d902fe9b
+ Approved-By: Kevin Buettner <kevinb@redhat.com>
+
+2022-11-24 Nick Clifton <nickc@redhat.com>
+
+ Impport libiberty commit: 885b6660c17f from gcc mainline. Fix gas's acinclude.m4 to stop a potwntial configure time warning message.
+
+2022-11-24 Martin Liska <mliska@suse.cz>
+
+ readelf: Do not require EI_OSABI for IFUNC.
+ PR 29718
+
+ binutils/ChangeLog:
+
+ * readelf.c (get_symbol_type): Consider STT_GNU_IFUNC as
+ reserved name.
+
+2022-11-24 Jan Beulich <jbeulich@suse.com>
+
+ x86: widen applicability and use of CheckRegSize
+ First of all make operand_type_register_match() apply to all sized
+ operands, i.e. in Intel Syntax also to respective memory ones. This
+ addresses gas wrongly accepting certain SIMD insns where register and
+ memory operand sizes should match but don't. This apparently has
+ affected all templates with one memory-only operand and one or more
+ register ones, both permitting at least two sizes, due to CheckRegSize
+ not taking effect.
+
+ Then also add CheckRegSize to a couple of non-SIMD templates matching
+ that same pattern of memory-only vs register operands. This replaces
+ bogus (for Intel Syntax) diagnostics referring to a wrong suffix (when
+ none was used at all) by "type mismatch" ones, just like already emitted
+ for insns where the template allows a register operand alongside a
+ memory one at any particular position.
+
+ This also is a prereq to limiting (ideally eliminating in the long run)
+ suffix "derivation" in Intel Syntax mode.
+
+ While making the code adjustment also flip order of checks to do the
+ cheaper one first in both cases.
+
+2022-11-24 Jan Beulich <jbeulich@suse.com>
+
+ x86: add missing CheckRegSize
+ To properly and predictably determine operand size encoding (operand
+ size or REX.W prefixes), consistent operand sizes need to be specified.
+ Add CheckRegSize where this was previously missing.
+
+ x86: correct handling of LAR and LSL
+ Both uniformly only ever take 16-bit memory operands while at the same
+ time requiring matching (in size) register operands, which then also
+ should disassemble that way. This in particular requires splitting each
+ of the templates for the assembler and separating decode of the
+ register and memory forms in the disassembler.
+
+2022-11-24 Alan Modra <amodra@gmail.com>
+
+ Tidy objdump printing of section size
+ * objdump.c (load_specific_debug_section): Use PRIx64 format.
+
+ Constify nm format array
+ * nm.c (formats, format): Make const.
+
+2022-11-24 Alan Modra <amodra@gmail.com>
+
+ PR16995, m68k coldfire emac immediate to macsr incorrect disassembly
+ Mode/reg bits for these insns are 000 Dy, 001 Ay, and 111 100 for the
+ move immediate.
+
+ * m68k-opc.c (m68k_opcodes): Only accept 000 and 001 as mode
+ for move reg to macsr/mask insns.
+
+2022-11-24 Mark Harmstone <mark@harmstone.com>
+
+ gas: Disable --gcodeview on PE targets with no O_secrel
+
+2022-11-24 GDB Administrator <gdbadmin@sourceware.org>
+
+ Automatic date update in version.in
+
+2022-11-23 Torbjörn SVENSSON <torbjorn.svensson@foss.st.com>
+
+ gdb/arm: Include FType bit in EXC_RETURN pattern on v8m
+ For v8m, the EXC_RETURN pattern, without security extension, consists of
+ FType, Mode and SPSEL. These are the same bits that are used in v7m.
+ This patch extends the list of patterns to include also the FType bit
+ and not just Mode and SPSEL bits for v8m targets without security
+ extension.
+
+2022-11-23 Alan Modra <amodra@gmail.com>
+
+ regen POTFILES.in
+
+2022-11-23 Alan Modra <amodra@gmail.com>
+
+ PR22509 - Null pointer dereference on coff_slurp_reloc_table
+ This extends the commit 4581a1c7d304 fix to more targets, which
+ hardens BFD a little. I think the real underlying problem was the
+ bfd_canonicalize_reloc call in load_specific_debug_section which
+ passed a NULL for "symbols". Fix that too.
+
+ PR 22509
+ bfd/
+ * aoutx.h (swap_ext_reloc_out): Gracefully handle NULL symbols.
+ * i386lynx.c (swap_ext_reloc_out): Likewise.
+ * pdp11.c (pdp11_aout_swap_reloc_out): Likewise.
+ * coff-tic30.c (reloc_processing): Likewise.
+ * coff-tic4x.c (tic4x_reloc_processing): Likewise.
+ * coff-tic54x.c (tic54x_reloc_processing): Likewise.
+ * coff-z80.c (reloc_processing): Likewise.
+ * coff-z8k.c (reloc_processing): Likewise.
+ * ecoff.c (ecoff_slurp_reloc_table): Likewise.
+ * som.c (som_set_reloc_info): Likewise.
+ binutils/
+ * objdump.c (load_specific_debug_section): Pass syms to
+ bfd_canonicalize_reloc.
+
+2022-11-23 Alan Modra <amodra@gmail.com>
+
+ asan: NULL deref in filter_symbols
+ If tdata->symbols is NULL, make tdata->symcount zero too. This makes
+ wasm_get_symtab_upper_bound return the proper result and stops
+ cascading errors.
+
+ * wasm-module.c (wasm_scan_name_function_section): Clear
+ tdata->symcount on error.
+
+2022-11-23 Luis Machado <luis.machado@arm.com>
+
+ Document the memory_tagged argument for memory region callbacks
+ There were no comments in some instances (gdb/defs.h, gdb/core.c and
+ gdb/linux-tdep.c), so address that by adding comments where those are missing.
+
+2022-11-23 Tom de Vries <tdevries@loganberry-1.arch.suse.de>
+
+ Fix gdb.cp/gdb2495.exp on powerpc64le
+ On powerpc64le-linux I ran into this FAIL:
+ ...
+ (gdb) p exceptions.throw_function()^M
+ terminate called after throwing an instance of 'int'^M
+ ^M
+ Program received signal SIGABRT, Aborted.^M
+ 0x00007ffff7979838 in raise () from /lib64/libc.so.6^M
+ The program being debugged was signaled while in a function called from GDB.^M
+ GDB remains in the frame where the signal was received.^M
+ To change this behavior use "set unwindonsignal on".^M
+ Evaluation of the expression containing the function^M
+ (SimpleException::throw_function()) will be abandoned.^M
+ When the function is done executing, GDB will silently stop.^M
+ (gdb) FAIL: gdb.cp/gdb2495.exp: call a function that raises an exception \
+ without a handler.
+ ...
+
+ The following happens:
+ - we start an inferior call
+ - an internal breakpoint is set on the global entry point of std::terminate
+ - the inferior call uses the local entry point
+ - the breakpoint is not triggered
+ - we run into std::terminate
+
+ We can fix this by simply adding the missing gdbarch_skip_entrypoint call in
+ create_std_terminate_master_breakpoint, but we try to do this a bit more
+ generic, by:
+ - adding a variant of function create_internal_breakpoint which takes a
+ minimal symbol instead of an address as argument
+ - in the new function:
+ - using both gdbarch_convert_from_func_ptr_addr and gdbarch_skip_entrypoint
+ - documenting why we don't need to use gdbarch_addr_bits_remove
+ - adding a note about possibly
+ needing gdbarch_deprecated_function_start_offset.
+ - using the new function in:
+ - create_std_terminate_master_breakpoint
+ - create_exception_master_breakpoint_hook, which currently uses only
+ gdbarch_convert_from_func_ptr_addr.
+
+ Note: we could use the new function in more locations in breakpoint.c, but
+ as we're not aware of any related failures, we declare this out of scope for
+ this patch.
+
+ Tested on x86_64-linux, powerpc64le-linux.
+
+ Co-Authored-By: Ulrich Weigand <uweigand@de.ibm.com>
+ Tested-by: Carl Love <cel@us.ibm.com>
+ PR tdep/29793
+ Bug: https://sourceware.org/bugzilla/show_bug.cgi?id=29793
+
+2022-11-23 Xiao Zeng <zengxiao@eswincomputing.com>
+
+ RISC-V: Make R_RISCV_SUB6 conforms to riscv ABI standard
+ According to the riscv psabi, R_RISCV_SUB6 only allows 6 least significant
+ bits are valid, but since binutils implementation, we usually get 8 bits
+ field for it. That means, the high 2 bits could be other field and have
+ different purpose. Therefore, we should filter the 8 bits to 6 bits before
+ calculate, and then only encode the valid 6 bits back. By the way, we also
+ need the out-of-range check for R_RISCV_SUB6, and the overflow checks for
+ all R_RISCV_ADD/SUB/SET relocations, but we can add them in the future patches.
+
+ Passing riscv-gnu-toolchain regressions.
+
+ bfd/ChangeLog:
+
+ * elfnn-riscv.c (riscv_elf_relocate_section): Take the R_RISCV_SUB6
+ lower 6 bits as the significant bit.
+ * elfxx-riscv.c (riscv_elf_add_sub_reloc): Likewise.
+
+2022-11-23 Mark Harmstone <mark@harmstone.com>
+
+ gas: Add --gcodeview option
+
+ ld: Add section contributions substream to PDB files
+
+2022-11-23 GDB Administrator <gdbadmin@sourceware.org>
+
+ Automatic date update in version.in
+
+2022-11-22 John Baldwin <jhb@FreeBSD.org>
+
+ aarch64-fbsd: Use a static regset for the TLS register set.
+ This uses custom collect/supply regset handlers which pass the TLS
+ register number from the gdbarch_tdep as the base register number.
+
+ Approved-By: Simon Marchi <simon.marchi@efficios.com>
+
+2022-11-22 John Baldwin <jhb@FreeBSD.org>
+
+ arm-fbsd: Use a static regset for the TLS register set.
+ This uses custom collect/supply regset handlers which pass the TLS
+ register number from the gdbarch_tdep as the base register number.
+
+ Approved-By: Simon Marchi <simon.marchi@efficios.com>
+
+2022-11-22 John Baldwin <jhb@FreeBSD.org>
+
+ fbsd-nat: Pass an optional register base to the register set helpers.
+ This is needed to permit using the helpers for register sets with a
+ variable base. In particular regnum needs to be converted into a
+ relative register number before passed to regcache_map_supplies.
+
+ Approved-By: Simon Marchi <simon.marchi@efficios.com>
+
+2022-11-22 John Baldwin <jhb@FreeBSD.org>
+
+ fbsd-nat: Use regset supply/collect methods.
+ fbsd-nat includes various helper routines for fetching and storing
+ register sets via ptrace where the register set is described by a
+ regset. These helper routines directly invoke the
+ supply/collect_regset regcache methods which doesn't permit a regset
+ to provide custom logic when fetching or storing a register set.
+ Instead, just use the function pointers from the struct regset
+ directly.
+
+ Approved-By: Simon Marchi <simon.marchi@efficios.com>
+
+2022-11-22 John Baldwin <jhb@FreeBSD.org>
+
+ regcache: Add collect/supply_regset variants that accept a register base.
+ Some register sets described by an array of regcache_map_entry
+ structures do not have fixed register numbers in their associated
+ architecture but do describe a block of registers whose numbers are at
+ fixed offsets relative to some base register value. An example of
+ this are the TLS register sets for the ARM and AArch64 architectures.
+
+ Currently OS-specific architectures create register maps and register
+ sets dynamically using the register base number. However, this
+ requires duplicating the code to create the register map and register
+ set. To reduce duplication, add variants of the collect_regset and
+ supply_regset regcache methods which accept a base register number.
+ For valid register map entries (i.e. not REGCACHE_MAP_SKIP), add this
+ base register number to the value from the map entry to determine the
+ final register number.
+
+ Approved-By: Simon Marchi <simon.marchi@efficios.com>
+
+2022-11-22 H.J. Lu <hjl.tools@gmail.com>
+
+ x86: Don't define _TLS_MODULE_BASE_ for ld -r
+ bfd/
+
+ PR ld/29820
+ * elfxx-x86.c (_bfd_x86_elf_always_size_sections): Don't define
+ _TLS_MODULE_BASE_ for ld -r.
+
+ ld/
+
+ PR ld/29820
+ * testsuite/ld-x86-64/pr29820.d: New file.
+ * testsuite/ld-x86-64/pr29820.s: Likewise.
+ * testsuite/ld-x86-64/x86-64.ex: Run pr29820.
+
+2022-11-22 Alan Modra <amodra@gmail.com>
+
+ Don't use "long" in readelf for file offsets
+ The aim here is to improve readelf handling of large 64-bit object
+ files on LLP64 hosts (Windows) where long is only 32 bits. The patch
+ changes more than just file offsets. Addresses and sizes are also
+ changed to avoid "long". Most places get to use uint64_t even where
+ size_t may be more appropriate, because that allows some overflow
+ checks to be implemented easily (*alloc changes).
+
+ * dwarf.c (cmalloc, xcmalloc, xcrealloc, xcalloc2): Make nmemb
+ parameter uint64_t.
+ * dwarf.h: Update prototypes.
+ (struct dwarf_section): Make num_relocs uint64_t.
+ * elfcomm.c (setup_archive): Update error format.
+ * elfcomm.h (struct archive_info): Make sym_size, longnames_size,
+ nested_member_origin, next_arhdr_offset uint64_t.
+ * readelf.c (struct filedata): Make archive_file_offset,
+ archive_file_size, string_table_length, dynamic_addr,
+ dynamic_nent, dynamic_strings_length, num_dynamic_syms,
+ dynamic_syminfo_offset uint64_t.
+ (many functions): Replace uses of "unsigned long" with
+ "uint64_t" or "size_t".
+
+2022-11-22 Alan Modra <amodra@gmail.com>
+
+ Re: readelf: use fseeko64 or fseeko if possible
+ Replace the macros with a small wrapper function that verifies the fseek
+ offset arg isn't overlarge.
+
+ * readelf.c (FSEEK_FUNC): Delete, replace uses with..
+ (fseek64): ..this new function.
+ (process_program_headers): Don't cast p_offset to long.
+
+2022-11-22 Torbjörn SVENSSON <torbjorn.svensson@foss.st.com>
+
+ gdb/arm: Fix obvious typo in b0b23e06c3a
+ As part of the rebase of the patch, I managed to loose the local
+ changes I had for the comments from Tomas in
+ https://sourceware.org/pipermail/gdb-patches/2022-November/193413.html
+ This patch corrects the obvious two typos.
+
+2022-11-22 Michael Matz <matz@suse.de>
+
+ binutils/configure.ac: integrate last change
+ Integrate back checks for fseeko{,64} into configure.ac, so
+ that regeneration works.
+
+ binutils/
+ * configure.ac: Add fseeko, fseeko64 checks.
+ * configure: Regenerate.
+
+2022-11-22 Shahab Vahedi <shahab@synopsys.com>
+
+ opcodes: Correct address for ARC's "isa_config" aux reg
+ This patch changes the address for "isa_config" auxiliary register
+ from 0xC2 to the correct value 0xC1. Moreover, it only exists in
+ arc700+ and not all ARCs.
+
+ opcodes/ChangeLog:
+
+ * arc-regs.h: Change isa_config address to 0xc1.
+ isa_config exists for ARC700 and ARCV2 and not ARCALL.
+
+2022-11-22 Bruno Larsen <blarsen@redhat.com>
+
+ gdb/testsuite: remove gcc restriction from gdb.dwarf2/clang-cli-macro.exp
+ With the recent changes to the dwarf assembler, there is no longer a
+ need to test for gcc in gdb.dwarf2/clang-cli-macro.exp and mark it as
+ untested. This commit removes that logic.
+
+2022-11-22 Jan Beulich <jbeulich@suse.com>
+
+ gas/sframe: avoid "shadowing" of glibc function name
+ Once again: Old enough glibc has an (unguarded) declaration of index()
+ in string.h, which triggers a "shadows a global declaration" warning
+ with our choice of wanring level and with at least some gcc versions.
+
+2022-11-22 GDB Administrator <gdbadmin@sourceware.org>
+
+ Automatic date update in version.in
+
+2022-11-21 Brett Werling <bwerl.dev@gmail.com>
+
+ readelf: use fseeko64 or fseeko if possible
+ Changes readelf to make use first of fseeko64 and then fseeko,
+ depending on which of those is available. If neither is available,
+ reverts to the previous behavior of using fseek.
+
+ This is necessary when building readelf for LLP64 systems, where a
+ long will only be 32 bits wide. If the elf file in question is >= 2 GiB,
+ that is greater than the max long value and therefore fseek will fail
+ indicating that the offset is negative. On such systems, making use of
+ fseeko64 or fseeko will result in the ability so seek past the 2 GiB
+ max long boundary.
+
+ Note that large archive handling in readelf remains to be fixed.
+
+2022-11-21 Alan Modra <amodra@gmail.com>
+
+ PR29807, SIGSEGV when linking fuzzed PE object
+ PR 29807
+ * cofflink.c (_bfd_coff_generic_relocate_section): Skip relocs
+ against symbols with a NULL section.
+
+2022-11-21 Alan Modra <amodra@gmail.com>
+
+ Re: ld: Always output local symbol for relocatable link
+ Remove this code dating back to commit 98790d3a95fc entirely, what it
+ was trying to do is done elsewhere.
+
+ PR ld/29761
+ * elflink.c (elf_link_output_symstrtab): Don't handle symbols
+ in SEC_EXCLUDE sections here.
+
+2022-11-21 Philippe Waroquiers <philippe.waroquiers@skynet.be>
+
+ When getting the locno of a bpstat, handle the case of bp with null locations.
+ The test py-objfile.exp unloads the current file while debugging the process.
+ This results in bpstat bs->b->loc to become nullptr.
+ Handle this case in breakpoint.c:bpstat_locno.
+
+ Note: GDB crashes on this problem with an internal error,
+ but the end of gdb summary shows:
+ ...
+ === gdb Summary ===
+
+ # of expected passes 36
+
+ The output also does not contain a 'FAIL:'.
+ After the fix, the nr of expected passes increased.
+
+ In the gdb.log output, one can see:
+ ...
+ Fatal signal: Segmentation fault
+ ----- Backtrace -----
+ 0x55698905c5b9 gdb_internal_backtrace_1
+ ../../binutils-gdb/gdb/bt-utils.c:122
+ 0x55698905c5b9 _Z22gdb_internal_backtracev
+ ...
+
+ ERROR: Couldn't send python print(objfile.filename) to GDB.
+ ERROR: : spawn id exp9 not open
+ while executing
+ "expect {
+ -i exp9 -timeout 10
+ -re ".*A problem internal to GDB has been detected" {
+ fail "$message (GDB internal error)"
+ gdb_internal_error..."
+ ("uplevel" body line 1)
+ invoked from within
+ ....
+
+ Wondering if it might be possible to improve gdb_test to have
+ gdb_test "python print(objfile.filename)" "None" \
+ "objfile.filename after objfile is unloaded"
+ reporting a failed result instead of just producing the internal error.
+
+2022-11-21 Philippe Waroquiers <philippe.waroquiers@skynet.be>
+
+ Fix use after free introduced by $_hit_bpnum/$_hit_locno variables.
+ If the commands of the bpstat bs contain commands such as step or next or
+ continue, the BS and its commands are freed by execute_control_command.
+
+ So, we cannot remember the BS that was printed. Instead, remember
+ the bpnum and locno.
+
+ Regtested on debian/amd64 and re-run a few tests under valgrind.
+
+2022-11-21 Philippe Waroquiers <philippe.waroquiers@skynet.be>
+
+ Fix step-over-syscall.exp matching regexp for $bpnum.$locno matching
+ step-over-syscall.exp has some specific tests for gdbserver.
+ The regexp matching breakpoint hit must take the added locno into account.
+
+ Test re-run in 3 modes (normal, native-gdbserver and native-extended-gdbserver).
+
+2022-11-21 Nick Clifton <nickc@redhat.com>
+
+ Fix ARM and AArch64 assembler tests to work in a multi-arch environment.
+ PR 29764
+ gas * testsuite/gas/arm/cpu-cortex-a76ae.d: Add arm prefix to the -m
+ option passed to objdump.
+ * testsuite/gas/arm/cpu-cortex-a77.d: Likewise.
+ * testsuite/gas/aarch64/cpu-cortex-a76ae.d: Add aarch64 prefix to
+ the -m option passed to objdump.
+ * testsuite/gas/aarch64/cpu-cortex-a77.d: Likewise.
+
+ bfd * cpu-arm.c (scan): Accept machine names prefixed with "arm:".
+ * cpu-aarch64.c (scan): Accept machine names prefixed with "aarch64:".
+
+ bin * doc/binutils.texi (objdump): Note that the -m option supports
+ the <architecture>:<machine> syntax.
+
+2022-11-21 Torbjörn SVENSSON <torbjorn.svensson@foss.st.com>
+
+ gdb/arm: Ensure that stack pointers are in sync
+ For targets with secext, msp and psp can be seen as an alias for one
+ of msp_s, msp_ns, psp_s or psp_ns.
+ Without this patch, sp might be secure, but msp or psp is non-secure
+ (this state can not happen in the hardware).
+
+ gdb/arm: Update active msp/psp when switching stack
+ For targets with secext, msp and psp can be seen as an alias for one
+ of msp_s, msp_ns, psp_s or psp_ns. When switching active sp, the
+ corresponding msp/psp needs to be switched too.
+
+2022-11-21 Jiangshuai Li <jiangshuai_li@linux.alibaba.com>
+
+ gdb/csky just return type from csky_vector_type() for vector resgisters
+ Some gdb stubs may not describe the type for vector registers in the
+ tdesc-xml and only send bitsize="128", gdb can't deal with a reg
+ with default type int with bitsize==128. So Just return csky_vector_type()
+ for vector resgisters.
+
+ gdb/csky return type int32 for float and vector pseudo regs
+ When reg_nr is one of the float and vector pseudo registers,
+ return builtin_type (gdbarch)->builtin_int32 for it.
+
+2022-11-21 GDB Administrator <gdbadmin@sourceware.org>
+
+ Automatic date update in version.in
+
+2022-11-20 Rainer Orth <ro@CeBiTec.Uni-Bielefeld.DE>
+
+ [PR build/29791] gnulib: Disable _GL_ATTRIBUTE_DEALLOC on Solaris
+ gdbsupport compilation badly fails with GCC 12 on Solaris, with errors
+ like
+
+ ../gnulib/config.h:1693:72: error: ‘malloc’ attribute argument 1 is ambiguous
+ 1693 | # define _GL_ATTRIBUTE_DEALLOC(f, i) __attribute__ ((__malloc__ (f, i)))
+ | ^
+ ../gnulib/config.h:1693:72: note: use a cast to the expected type to disambiguate
+
+ We've not yet been able to determine where the ambiguity actually lies,
+ so this patch works around the issue by disabling _GL_ATTRIBUTE_DEALLOC
+ on Solaris, at least as a workaround for GDB 13.
+
+ As Tom suggested in the PR, this is done using our infrastructure for
+ local gnulib patches.
+
+ Tested on sparcv9-sun-solaris2.11, amd64-pc-solaris2.11, and
+ x86_64-pc-linux-gnu.
+
+ Approved-By: Simon Marchi <simon.marchi@efficios.com>
+
+2022-11-20 Rainer Orth <ro@CeBiTec.Uni-Bielefeld.DE>
+
+ Fix sol-thread.c compilation on 32-bit Solaris
+ sol-thread.c fails to compile on 32-bit Solaris: there are several
+ instances of
+
+ In file included from /vol/src/gnu/gdb/hg/master/local/gdb/../gdbsupport/common-defs.h:203,
+ from /vol/src/gnu/gdb/hg/master/local/gdb/defs.h:28,
+ from /vol/src/gnu/gdb/hg/master/local/gdb/sol-thread.c:51:
+ /vol/src/gnu/gdb/hg/master/local/gdb/sol-thread.c: In member function ‘virtual void sol_thread_target::resume(ptid_t, int, gdb_signal)’:
+ /vol/src/gnu/gdb/hg/master/local/gdb/sol-thread.c:416:20: error: format ‘%ld’ expects argument of type ‘long int’, but argument 2 has type ‘ULONGEST’ {aka ‘long long unsigned int’} [-Werror=format=]
+ 416 | warning (_("Specified thread %ld seems to have terminated"),
+ | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+ /vol/src/gnu/gdb/hg/master/local/gdb/../gdbsupport/gdb_locale.h:28:29:
+ note: in definition of macro ‘_’
+ 28 | # define _(String) gettext (String)
+ | ^~~~~~
+ /vol/src/gnu/gdb/hg/master/local/gdb/sol-thread.c:416:40: note: format
+ string is defined here
+ 416 | warning (_("Specified thread %ld seems to have terminated"),
+ | ~~^
+ | |
+ | long int
+ | %lld
+
+ Fixed by using pulongest () instead.
+
+ Tested on i386-pc-solaris2.11, amd64-pc-solaris2.11,
+ sparc-sun-solaris2.11, and sparcv9-sun-solaris2.11 (together with
+ Simon's patch for PR build/29798).
+
+2022-11-20 GDB Administrator <gdbadmin@sourceware.org>
+
+ Automatic date update in version.in
+
+2022-11-19 Philippe Waroquiers <philippe.waroquiers@skynet.be>
+
+ Add missing gdb_prompt in ctxobj.exp to avoid random failure, fix typo.
+ ctxobj.exp fails randomly when computer is loaded.
+ With the addition of $gdb_prompt in the regexp testing for breakpoint hit,
+ I could not make it fail anymore.
+
+ Also fixed a typo in a comment.
+
+2022-11-19 Philippe Waroquiers <philippe.waroquiers@skynet.be>
+
+ Show locno for 'multi location' breakpoint hit msg+conv var $_hit_bbnum $_hit_locno PR breakpoints/12464
+ This implements the request given in PR breakpoints/12464.
+
+ Before this patch, when a breakpoint that has multiple locations is reached,
+ GDB printed:
+ Thread 1 "zeoes" hit Breakpoint 1, some_func () at somefunc1.c:5
+
+ This patch changes the message so that bkpt_print_id prints the precise
+ encountered breakpoint:
+ Thread 1 "zeoes" hit Breakpoint 1.2, some_func () at somefunc1.c:5
+
+ In mi mode, bkpt_print_id also (optionally) prints a new table field "locno":
+ locno is printed when the breakpoint hit has more than one location.
+ Note that according to the GDB user manual node 'GDB/MI Development and Front
+ Ends', it is ok to add new fields without changing the MI version.
+
+ Also, when a breakpoint is reached, the convenience variables
+ $_hit_bpnum and $_hit_locno are set to the encountered breakpoint number
+ and location number.
+
+ $_hit_bpnum and $_hit_locno can a.o. be used in the command list of a
+ breakpoint, to disable the specific encountered breakpoint, e.g.
+ disable $_hit_bpnum.$_hit_locno
+
+ In case the breakpoint has only one location, $_hit_locno is set to
+ the value 1, so as to allow a command such as:
+ disable $_hit_bpnum.$_hit_locno
+ to disable the breakpoint even when the breakpoint has only one location.
+
+ This also fixes a strange behaviour: when a breakpoint X has only
+ one location,
+ enable|disable X.1
+ is accepted but transforms the breakpoint in a multiple locations
+ breakpoint having only one location.
+
+ The changes in RFA v4 handle the comments of Tom Tromey:
+ - Changed convenience var names from $bkptno/$locno to
+ $_hit_bpnum/$_hit_locno.
+ - updated the tests and user manual accordingly.
+ User manual also explictly describes that $_hit_locno is set to 1
+ for a breakpoint with a single location.
+ - The variable values are now set in bpstat_do_actions_1 so that
+ they are set for silent breakpoints, and when several breakpoints
+ are hit at the same time, that the variables are set to the printed
+ breakpoint.
+
+ The changes in RFA v3 handle the additional comments of Eli:
+ GDB/NEW:
+ - Use max 80-column
+ - Use 'code location' instead of 'location'.
+ - Fix typo $bkpno
+ - Ensure that disable $bkptno and disable $bkptno.$locno have
+ each their explanation inthe example
+ - Reworded the 'breakpoint-hit' paragraph.
+ gdb.texinfo:
+ - Use 'code location' instead of 'location'.
+ - Add a note to clarify the distinction between $bkptno and $bpnum.
+ - Use @kbd instead of examples with only one command.
+
+ Compared to RFA v1, the changes in v2 handle the comments given by
+ Keith Seitz and Eli Zaretskii:
+ - Use %s for the result of paddress
+ - Use bkptno_numopt_re instead of 2 different -re cases
+ - use C@t{++}
+ - Add index entries for $bkptno and $locno
+ - Added an example for "locno" in the mi interface
+ - Added examples in the Break command manual.
+
+2022-11-19 Tsukasa OI <research_trasio@irq.a4lg.com>
+
+ RISC-V: Add 'Ssstateen' extension and its CSRs
+ This commit adds 'Ssstateen' extension, which is a supervisor-visible view
+ of the 'Smstateen' extension. It means, this extension implements sstateen*
+ and hstateen* CSRs of the 'Smstateen' extension.
+
+ Note that 'Smstateen' extension itself is unchanged but due to
+ implementation simplicity, it is implemented so that 'Smstateen' implies
+ 'Ssstateen' (just like 'M' implies 'Zmmul').
+
+ This is based on the latest version of RISC-V Profiles
+ (version 0.9-draft, Frozen):
+ <https://github.com/riscv/riscv-profiles/commit/226b7f643067b29abc6723fac60d5f6d3f9eb901>
+
+ bfd/ChangeLog:
+
+ * elfxx-riscv.c (riscv_implicit_subsets): Update implication rules.
+ (riscv_supported_std_s_ext) Add 'Ssstateen' extension.
+
+ gas/ChangeLog:
+
+ * config/tc-riscv.c (enum riscv_csr_class): Rename
+ CSR_CLASS_SMSTATEEN_AND_H{,_32} to CSR_CLASS_SSSTATEEN_...
+ Add CSR_CLASS_SSSTATEEN.
+ (riscv_csr_address): Support new/renamed CSR classes.
+ * testsuite/gas/riscv/csr.s: Add 'Ssstateen' extension to comment.
+ * testsuite/gas/riscv/csr-version-1p9p1.l: Reflect changes to
+ error messages.
+ * testsuite/gas/riscv/csr-version-1p10.l: Likewise.
+ * testsuite/gas/riscv/csr-version-1p11.l: Likewise.
+ * testsuite/gas/riscv/csr-version-1p12.l: Likewise.
+ * testsuite/gas/riscv/ssstateen-csr.s: Test for 'Ssstateen' CSRs.
+ * testsuite/gas/riscv/ssstateen-csr.d: Likewise.
+ * testsuite/gas/riscv/smstateen-csr-s.d: Test to make sure that
+ supervisor/hypervisor part of 'Smstateen' CSRs are accessible from
+ 'RV32IH_Smstateen', not just from 'RV32IH_Ssstateen' that is tested
+ in ssstateen-csr.d.
+
+ include/ChangeLog:
+
+ * opcode/riscv-opc.h: Update DECLARE_CSR declarations with
+ new CSR classes.
+
+2022-11-19 GDB Administrator <gdbadmin@sourceware.org>
+
+ Automatic date update in version.in
+
+2022-11-18 Simon Marchi <simon.marchi@efficios.com>
+
+ gdbserver/linux-x86: move lwp declaration out of __x86_64__ region
+ Commit 4855cbdc3d8f ("gdbserver/linux-x86: make is_64bit_tdesc accept
+ thread as a parameter") caused this when building in 32 bits / i386
+ mode:
+
+ CXX linux-x86-low.o
+ In file included from /home/smarchi/src/binutils-gdb/gdbserver/linux-x86-low.cc:24:
+ /home/smarchi/src/binutils-gdb/gdbserver/linux-x86-low.cc: In member function ‘virtual int x86_target::low_get_thread_area(int, CORE_ADDR*)’:
+ /home/smarchi/src/binutils-gdb/gdbserver/linux-x86-low.cc:357:47: error: ‘lwp’ was not declared in this scope
+ 357 | struct thread_info *thr = get_lwp_thread (lwp);
+ | ^~~
+ /home/smarchi/src/binutils-gdb/gdbserver/linux-low.h:709:31: note: in definition of macro ‘get_lwp_thread’
+ 709 | #define get_lwp_thread(lwp) ((lwp)->thread)
+ | ^~~
+
+ This is because it moved the lwp variable declaration inside the
+ __x86_64__ guard, making it unavailable when building in 32 bits mode.
+ Move the lwp variable outside of the __x86_64__ region.
+
+ Change-Id: I7fa3938c6b44b345c27a52c8b8d3ea12aba53e05
+
+2022-11-18 Simon Marchi <simon.marchi@efficios.com>
+
+ gdbserver: use current_process in ps_getpid
+ The following patch ("gdbserver: switch to right process in
+ find_one_thread") makes it so find_one_thread calls into libthread_db
+ with a current process but no current thread. This tripped on ps_getpid
+ using current_thread in order to get the process' pid. Get the pid from
+ `current_process ()` instead, which removes the need to have a current
+ thread. Eventually, it would be good to get it from the
+ gdb_ps_prochandle_t structure, to avoid the need for a current process
+ as well.
+
+ Reviewed-By: Andrew Burgess <aburgess@redhat.com>
+ Change-Id: I9d2fae266419199a2fbc2fde0a5104c6e0dbd2d5
+
+2022-11-18 Simon Marchi <simon.marchi@efficios.com>
+
+ gdbserver/linux-x86: make is_64bit_tdesc accept thread as a parameter
+ ps_get_thread_area receives as a parameter the lwpid it must work on.
+ It then calls is_64bit_tdesc, which uses the current_thread as the
+ thread to work on. However, it is not said that both are the same.
+
+ This became a problem when working in a following patch that makes
+ find_one_thread switch to a process but to no thread (current_thread ==
+ nullptr). When libthread_db needed to get the thread area,
+ is_64bit_tdesc would try to get the regcache of a nullptr thread.
+
+ Fix that by making is_64bit_tdesc accept the thread to work on as a
+ parameter. Find the right thread from the context, when possible (when
+ we know the lwpid to work on). Otherwise, pass "current_thread", to
+ retain the existing behavior.
+
+ Reviewed-By: Andrew Burgess <aburgess@redhat.com>
+ Change-Id: I44394d6be92392fa28de71982fd04517ce8a3007
+
+2022-11-18 Simon Marchi <simon.marchi@polymtl.ca>
+
+ gdbserver/linux: take condition out of callback in find_lwp_pid
+ Just a small optimization, it's not necessary to recompute lwp at each
+ iteration.
+
+ While at it, change the variable type to long, as ptid_t::lwp returns a
+ long.
+
+ Reviewed-By: Andrew Burgess <aburgess@redhat.com>
+ Change-Id: I181670ce1f90b59cb09ea4899367750be2ad9105
+
+2022-11-18 Johnson Sun <j3.soon777@gmail.com>
+
+ Fix deletion of FinishBreakpoints
+ Currently, FinishBreakpoints are set at the return address of a frame based on
+ the `finish' command, and are meant to be temporary breakpoints. However, they
+ are not being cleaned up after use, as reported in PR python/18655. This was
+ happening because the disposition of the breakpoint was not being set
+ correctly.
+
+ This commit fixes this issue by correctly setting the disposition in the
+ post-stop hook of the breakpoint. It also adds a test to ensure this feature
+ isn't regressed in the future.
+
+ Bug: https://sourceware.org/bugzilla/show_bug.cgi?id=18655
+
+2022-11-18 Simon Marchi <simon.marchi@polymtl.ca>
+
+ gdb: fix symtab.c build on 32 bit targets
+ When building on Ubuntu 22.04, gcc 12, x86-64 with -m32 and -O2, I get:
+
+ CXX symtab.o
+ /home/smarchi/src/binutils-gdb/gdb/symtab.c: In member function ‘std::vector<symbol_search> global_symbol_searcher::search() const’:
+ /home/smarchi/src/binutils-gdb/gdb/symtab.c:4961:44: error: ‘__builtin___sprintf_chk’ may write a terminating nul past the end of the destination [-Werror=format-overflow=]
+ 4961 | sprintf (tmp, "operator%.*s%s", fix, " ", opname);
+ | ^
+ In file included from /usr/include/stdio.h:894,
+ from ../gnulib/import/stdio.h:43,
+ from /home/smarchi/src/binutils-gdb/gdb/../gdbsupport/common-defs.h:86,
+ from /home/smarchi/src/binutils-gdb/gdb/defs.h:28,
+ from /home/smarchi/src/binutils-gdb/gdb/symtab.c:20:
+ In function ‘int sprintf(char*, const char*, ...)’,
+ inlined from ‘std::vector<symbol_search> global_symbol_searcher::search() const’ at /home/smarchi/src/binutils-gdb/gdb/symtab.c:4961:16:
+ /usr/include/i386-linux-gnu/bits/stdio2.h:38:34: note: ‘__builtin___sprintf_chk’ output between 9 and 2147483648 bytes into a destination of size 2147483647
+ 38 | return __builtin___sprintf_chk (__s, __USE_FORTIFY_LEVEL - 1,
+ | ~~~~~~~~~~~~~~~~~~~~~~~~^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+ 39 | __glibc_objsize (__s), __fmt,
+ | ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+ 40 | __va_arg_pack ());
+ | ~~~~~~~~~~~~~~~~~
+
+ PR build/29798 shows a similar error message but on Solaris.
+
+ Work around that by using string_printf. It is a good thing to get rid
+ of the alloca anyway.
+
+ Change-Id: Ifbac11fee3062ad7f134d596b4e2229dc5d166f9
+ Bug: https://sourceware.org/bugzilla/show_bug.cgi?id=29798
+
+2022-11-18 Andrew Burgess <aburgess@redhat.com>
+
+ gdb/testsuite: rewrite gdb.cp/call-method-register.exp with dwarf assembler
+ Convert the gdb.cp/call-method-register.exp test to make use of the
+ DWARF assembler.
+
+ The existing gdb.cp/call-method-register.exp test relies on a GCC
+ extension - forcing a local variable into a particular named register.
+
+ This means that the test will only work with Clang, and, as we have to
+ name the register into which the variable will be placed, will only
+ work for those targets where we've selected a suitable register,
+ currently this is x86-64, i386, and ppc64.
+
+ By switching to the DWARF assembler, the test will work with gcc and
+ clang, and should work on most, if not all, architectures.
+
+ The test creates a small structure, something that can fit within a
+ register, and then tries to call a method on the structure from within
+ GDB. This should fail because GDB can't take the address of the in
+ register structure (for the `this` pointer).
+
+ As the test is for a failure case, then we don't really care _which_
+ register the structure is in, and I take advantage of this for the
+ DWARF assembler test, I just declare that the variable is in
+ DW_OP_reg0, whatever that might be. I've tested the new test on
+ x86-64, ppc, aarch64, and risc-v, and the test runs, and passes on all
+ these architectures, which is already more than we used to cover.
+
+ Additionally, on x86-64, I've tested with Clang and gcc, and the test
+ runs and passed with both compilers.
+
+ Reviewed-By: Lancelot SIX <lancelot.six@amd.com>
+
+2022-11-18 Andrew Burgess <aburgess@redhat.com>
+
+ gdb/testsuite: fix gdb.debuginfod/fetch_src_and_symbols.exp with Clang
+ The gdb.debuginfod/fetch_src_and_symbols.exp test is showing a single
+ failure when run with some older versions of Clang, e.g. 9.0.1.
+
+ The problem appears to be with Clang's generated line table. The test
+ source looks like this:
+
+ int
+ main()
+ {
+ asm ("main_label: .globl main_label");
+ return 0;
+ }
+
+ In GDB, when we 'start', we expect to stop at the 'return 0;' line.
+ This is the behaviour when the compiler is gcc, or later versions of
+ Clang.
+
+ However, with Clang 9.0.2, I see GDB stop on the 'asm' line.
+
+ In this commit I'll fix this issue by placing a breakpoint on the
+ return line, and then using gdb_continue_to_breakpoint to ensure we
+ have stopped in the correct place.
+
+ Of course, using gdb_continue_to_breakpoint will only work if we are
+ not already stopped at the breakpoint location, so I've added some
+ filler work before the 'return 0;' line. With this done we can use
+ gdb_continue_to_breakpoint in all cases.
+
+ As a result of adding the new filler work, one of the later tests,
+ that used the 'list' command, no longer see the correct expected
+ output (the top line of the source file is no longer included in the
+ output). I've fixed this by listing a known specific line, the test
+ is checking that GDB managed to find the source file, it doesn't
+ matter which source line we list, as long as we can list something.
+
+2022-11-18 Andrew Burgess <aburgess@redhat.com>
+
+ gdb/testsuite: rename source file gdb.debuginfod/main.c
+ The test gdb.debuginfod/fetch_src_and_symbols.exp uses a source file
+ named main.c. I can't see any particular reason why the file is named
+ as such.
+
+ Usually test source files are named after the test script.
+
+ This commit just renames the source file inline with the test script,
+ and updates the call to standard_testfile (removing the reference to
+ main.c).
+
+ There's no particular reason for this change other than seeing the
+ file named main.c made me thing that the source file must be shared
+ with some other test (it isn't).
+
+ There should be no change in what is tested after this commit.
+
+2022-11-18 Andrew Burgess <aburgess@redhat.com>
+
+ gdb/testsuite: add (and use) a new build-id compile option
+ I noticed that the gdb.debuginfod/fetch_src_and_symbols.exp test was
+ failing when run with Clang as the compiler.
+
+ This test relies on the compiled binaries having a build-id within
+ them. For GCC, really GNU ld, the default is to always include a
+ build-id.
+
+ When compiling with Clang though, the default is for no build-id.
+
+ I did consider *always* turning on the build-id feature when the
+ compiler is Clang, but that felt a little weird.
+
+ Instead, I propose that we add a new 'build-id' compiler option to
+ gdb_compile, this flag indicates that the test _requires_ a build-id.
+ In gcc_compile we can then add the required flags if the compiler is
+ Clang so that we do get a build-id.
+
+ With this change the gdb.debuginfod/fetch_src_and_symbols.exp test
+ now (mostly) passes with Clang 9.0.1 and 15.0.2, and still passes with
+ gcc. The 'mostly' part is an unrelated issue, and will be addressed
+ in a later commit in this series.
+
+ Reviewed-By: Lancelot SIX <lancelot.six@amd.com>
+
+2022-11-18 Andrew Burgess <aburgess@redhat.com>
+
+ gdb/testsuite: fix gdb.compile/compile-ops.exp with clang
+ I noticed that the gdb.compile/compile-ops.exp test was failing when
+ run with Clang as the compiler.
+
+ This test makes use of the DWARF assembler, and, it turns out, uses
+ a technique which is not portable to Clang. This problem is
+ described in the comment on the function_range proc in lib/dwarf.exp,
+ the explanation is:
+
+ # If the compiler is gcc, we can do the following to get function start
+ # and end address too:
+ #
+ # asm ("func_start: .globl func_start");
+ # static void func (void) {}
+ # asm ("func_end: .globl func_end");
+ #
+ # however, this isn't portable, because other compilers, such as clang,
+ # may not guarantee the order of global asms and function. The code
+ # becomes:
+ #
+ # asm ("func_start: .globl func_start");
+ # asm ("func_end: .globl func_end");
+ # static void func (void) {}
+
+ These start/end labels are used for computing the function start, end,
+ and length. The portable solution is to place a label within the
+ function, like this:
+
+ # int main (void)
+ # {
+ # asm ("main_label: .globl main_label");
+ # return 0;
+ # }
+
+ And make use of 'proc function_range' (from lib/dwarf.exp).
+
+ So, that's what I do in this commit.
+
+ One consequence of this change is that we need to compile the source
+ file, and have it loaded into a GDB session, before calling
+ function_range, so I've added an early call to prepare_for_testing.
+
+ Additionally, this test script was generating the DWARF assembler into
+ a file called gdbjit-ops.S, I suspect a copy and paste issue there, so
+ I've switched this to use compile-ops-dbg.S instead, which is more
+ inline with what other DWARF assembler tests do.
+
+ The only other change, which might be a problem, is that I also
+ deleted these two lines from the source file:
+
+ asm (".section \".text\"");
+ asm (".balign 8");
+
+ These lines were setting the alignment of the .text section. What I
+ don't know is whether this was significant or not. If it is
+ significant, then I can't see why.
+
+ On x86-64, the test still passes fine without these lines, but that
+ doesn't mean the test wont start failing on some other architecture.
+
+ Still, I figure, lets remove them, then, if/when we find a test that
+ starts failing, we can add the lines back, along with an explanation
+ for why the extra alignment is required.
+
+ But, if people would prefer to be more conservative, then I'm happy to
+ just add the lines back.
+
+ Reviewed-By: Lancelot SIX <lancelot.six@amd.com>
+
+2022-11-18 Andrew Burgess <aburgess@redhat.com>
+
+ gdb/testsuite: fix gdb.trace/unavailable-dwarf-piece.exp with Clang
+ I noticed that the test gdb.trace/unavailable-dwarf-piece.exp was
+ failing when run with Clang. Or rather, the test was not running as
+ the test executable failed to compile.
+
+ The problem is that Clang was emitting this warning:
+
+ warning: argument unused during compilation: '-fdiagnostics-color=never' [-Wunused-command-line-argument]
+
+ This warning is emitted when compiling the assembler file generated
+ by the DWARF assembler.
+
+ Most DWARF assembler tests generate the assembler file into a file
+ with the '.S' extension. However, this particular test uses a '.s'
+ extension.
+
+ Now a .S file will be passed through the preprocessor, while a .s will
+ be sent straight to the assembler. My guess is that Clang doesn't
+ support the -fdiagnostics-color=never option for the assembler, but
+ does for the preprocessor.
+
+ That's a little annoying, but easily worked around. We don't care if
+ our assembler file is passed through the preprocessor, so, in this
+ commit, I just change the file extension from .s to .S, and the
+ problem is fixed.
+
+ Currently, the unavailable-dwarf-piece.exp script names the assembler
+ file using standard_output_file, in this commit I've switched to make
+ use of standard_testfile, as that seems to be the more common way of
+ doing this sort of thing.
+
+ With these changes the test now passes with Clang 9.0.1 and 15.0.2,
+ and also still passes with gcc.
+
+ Reviewed-By: Lancelot SIX <lancelot.six@amd.com>
+
+2022-11-18 Andrew Burgess <aburgess@redhat.com>
+
+ gdb/testsuite: don't avoid DWARF assembler tests with Clang
+ Two tests make the claim that the DWARF assembler requires gcc,
+ however, this isn't true. I think at one point, when the DWARF
+ assembler was first added, we did use some techniques that were not
+ portable (see the comments in lib/dwarf.exp on function_range for
+ details), however, I think most DWARF assembler tests will now work
+ fine with Clang.
+
+ The two tests that I modify in this commit both work fine with Clang,
+ at least, I've tested with Clang 9.0.1 and 15.0.2, and don't see any
+ problems, so I'm removing the early return logic that stops these
+ tests from running with Clang.
+
+ Reviewed-By: Lancelot SIX <lancelot.six@amd.com>
+
+2022-11-18 Zac Walker <zac.walker@linaro.org>
+
+ GAS fix alignment for aarch64-pe
+ Fixes issue where various values of '.align' causes writing of COFF files to fail.
+ Specific to the aarch64-pe target.
+
+2022-11-18 Alan Modra <amodra@gmail.com>
+
+ PR29799 heap buffer overflow in display_gdb_index dwarf.c:10548
+ PR 29799
+ * dwarf.c (display_gdb_index): Typo fix.
+
+ go32 sanity check
+ * coff-stgo32 (go32exe_check_format): Sanity check stubsize against
+ filesize before malloc.
+
+ Regen potfiles for sframe
+
+2022-11-18 GDB Administrator <gdbadmin@sourceware.org>
+
+ Automatic date update in version.in
+
+2022-11-17 Indu Bhagat <indu.bhagat@oracle.com>
+
+ [gas, aarch64]: fix build breakage for aarch64-pe
+ SFrame is supported for ELF only. Keep the definitions and declarations
+ guarded with OBJ_ELF consistently.
+
+ ChangeLog:
+
+ * gas/config/tc-aarch64.h: Guard SFrame related definitions
+ with OBJ_ELF.
+
+2022-11-17 Tom Tromey <tromey@adacore.com>
+
+ Fix static initialization order problem in windows-nat.c
+ This patch fixes a static initialization order problem in
+ windows-nat.c that was pointed out by Jon Turney. The underlying
+ problem is that the windows_nat_target constructor relies on
+ serial_logfile already being constructed, but this is not enforced by
+ C++ rules. This patch fixes the problem by initializing the global
+ windows_nat_target later.
+
+2022-11-17 H.J. Lu <hjl.tools@gmail.com>
+
+ opcodes: Define NoSuf in i386-opc.tbl
+ Use NoSuf to replace No_bSuf|No_wSuf|No_lSuf|No_sSuf|No_qSuf|No_ldSuf
+ and add the explicit NoSuf to AddrPrefixOpReg in templates.
+
+ * i386-opc.tbl (NoSuf): New macro.
+ (AddrPrefixOpReg): Remove No_?Suf.
+ Replace No_bSuf|No_wSuf|No_lSuf|No_sSuf|No_qSuf|No_ldSuf with
+ NoSuf in templates.
+ Add NoSuf to AddrPrefixOpReg in templates.
+
+2022-11-17 H.J. Lu <hjl.tools@gmail.com>
+
+ i386: Move i386_seg_prefixes to gas
+ gas/
+
+ * config/tc-i386.c (i386_seg_prefixes): New. Moved from opcodes.
+
+ opcodes/
+
+ * i386-opc.c (i386_seg_prefixes): Removed.
+ * i386-opc.h (i386_seg_prefixes): Likewise.
+
+2022-11-17 Carl Love <cel@us.ibm.com>
+
+ PowerPC, fix gdb.base/retval-large-struct.exp
+ Support for printining non-trivial return values was recently added in
+ commit:
+
+ commit a0eda3df5b750ae32576a9be092b361281a41787
+ Author: Carl Love <cel@us.ibm.com>
+ Date: Mon Nov 14 16:22:37 2022 -0500
+
+ PowerPC, fix support for printing the function return value for non-trivial values.
+
+ The functionality can now be used to fix gdb.base/retval-large-struct.exp.
+ The test just needs to be compiled with -fvar-tracking to enable GDB to
+ determine the address off the return buffer when the function is called.
+
+ The current output from the test:
+
+ 34 return big_struct;
+ (gdb) PASS: gdb.base/retval-large-struct.exp: continue to breakpoint: Break in print_large_struct
+ finish
+ warning: Cannot determine the function return value.
+ Try compiling with -fvar-tracking.
+ Run till exit from #0 return_large_struct () at binutils-gdb-current/gdb/testsuite/gdb.base/retval-large-struct.c:34
+ main (argc=1, argv=0x7fffffffcd58) at binutils-gdb-current/gdb/testsuite/gdb.base/retval-large-struct.c:44
+ 44 return 0;
+ Value returned has type: struct big_struct_t. Cannot determine contents
+ (gdb) FAIL: gdb.base/retval-large-struct.exp: finish from return_large_struct
+ testcase binutils-gdb-current/gdb/testsuite/gdb.base/retval-large-struct.exp completed in 1 seconds
+
+ This patch adds the command line argument -fvar-tracking to enable gdb to
+ determine the return vaule and thus fixing the test.
+
+ Patch tested on Power 10 with no regressions.
+
+2022-11-17 Tom Tromey <tromey@adacore.com>
+
+ Use boolean literals for pagination_enabled
+ I noticed a couple of spots that used '0' rather than 'false' when
+ modifying pagination_enabled. This patch cleans these up.
+
+2022-11-17 Carl Love <cel@us.ibm.com>
+
+ Change NULL to nullptr in gdb/infcmd.c and gdb/infrun.c
+ The GDB coding standard specifies that nullptr should be used instead of
+ NULL. There are numerous uses of NULL and nullptr in files infcmd.c and
+ infrun.c. This patch replaces the various uses of NULL with nullptr in
+ the source files. The use of NULL in the comments was not changed.
+
+ The patch does not introduce any functional changes.
+
+ The patch has been tested on PowerPC and Intel X86_64 with no new unexpected
+ test failures, unresolved tests, new core files etc.
+
+2022-11-17 H.J. Lu <hjl.tools@gmail.com>
+
+ ld: Always call elf_backend_output_arch_local_syms
+ Always call elf_backend_output_arch_local_syms since only the backend
+ knows if elf_backend_output_arch_local_syms is needed when all symbols
+ are striped. elf_backend_output_arch_local_syms is defined only for
+ x86, ARM and AARCH64. On x86, elf_backend_output_arch_local_syms must
+ be called to handle local IFUNC symbols even if all symbols are striped.
+ Update ARM and AARCH64 to skip elf_backend_output_arch_local_syms when
+ symbols aren't needed.
+
+ bfd/
+
+ PR ld/29797
+ * elf32-arm.c (elf32_arm_output_arch_local_syms): Skip if symbols
+ aren't needed.
+ * elfnn-aarch64.c (elfNN_aarch64_output_arch_local_syms):
+ Likewise.
+ * elflink.c (bfd_elf_final_link): Always call
+ elf_backend_output_arch_local_syms if available.
+
+ ld/
+
+ PR ld/29797
+ * testsuite/ld-elf/linux-x86.exp: Run PR ld/29797 test.
+ * testsuite/ld-elf/pr29797.c: New file.
+
+2022-11-17 Andrew Burgess <aburgess@redhat.com>
+
+ gdb: new $_inferior_thread_count convenience variable
+ Add a new convenience variable $_inferior_thread_count that contains
+ the number of live (non-exited) threads in the current inferior. This
+ can be used in command scripts, or breakpoint conditions, etc to
+ adjust the behaviour for multi-threaded inferiors.
+
+ This value is only stable in all-stop mode. In non-stop mode, where
+ new threads can be started, and existing threads exit, at any time,
+ this convenience variable can give a different value each time it is
+ evaluated.
+
+2022-11-17 Tom Tromey <tromey@adacore.com>
+
+ Remove two obsolete declarations
+ I happened to find a couple of obsolete declarations in cli-interp.h.
+ This patch removes them. Tested by rebuilding.
+
+2022-11-17 Andrew Burgess <aburgess@redhat.com>
+
+ gdb/testsuite: fix failure in gdb.python/py-send-packet.exp
+ While working on another patch I noticed that, when run on an AArch64
+ target, the test gdb.python/py-send-packet.exp was failing:
+
+ Traceback (most recent call last):
+ File "<string>", line 1, in <module>
+ File "/tmp/build/gdb/testsuite/outputs/gdb.python/py-send-packet/py-send-packet.py",
+ line 106, in run_auxv_send_packet_test
+ assert string == expected_result
+ AssertionError
+ Error while executing Python code.
+ (gdb) FAIL: gdb.python/py-send-packet.exp: call python run_auxv_send_packet_test function
+
+ The test uses 'maint packet ...' to send a packet to gdbserver, and
+ then captures the output in TCL. This output is then passed through
+ to a Python function, which performs some actions using the Python
+ API, and compares the results from the Python API to the results
+ captured in TCL from 'maint packet ...'.
+
+ The problem is that the output captured in TCL contains lots of things
+ like '\x000', when this is passed through to Python the '\x' causes
+ this to be treated as an escape code, which isn't what we want - we
+ want the actual string "\x000".
+
+ So, in the TCL part of the test we were expanding '\x' to '\\x', this
+ seemed to work fine for my testing on x86-64.
+
+ However, on AArch64 what I see is that the results from 'maint packet
+ ...' contain a literal '\' character followed by a literal 'x'
+ character. When GDB prints this in the 'maint packet' output, GDB
+ escapes the '\' for us, thus we get '\\x' printed by 'maint packet'.
+
+ However, now our TCL test script kicks in and tries to "fix" the '\x',
+ this means we now have '\\\x', which isn't correct.
+
+ The problem is that in the TCL script we are too restrictive, we
+ expand '\x' to '\\x', but really, we should be expanding all '\'
+ characters, regardless of what follows them. This is what this patch
+ does.
+
+ After this the gdb.python/py-send-packet.exp test passes on AArch64
+ for me.
+
+2022-11-17 Aditya Vidyadhar Kamath <Aditya.Kamath1@ibm.com>
+
+ Fix call functions command bug in 64 bits programs for AIX
+ In AIX for 64 bit programs we need to zero extend variables
+ of integer or enum or char data type.
+
+ Otherwise a zero will get dumped in the register as we memset
+ our word to 0 and we copy non zero extended contents to the cache.
+
+2022-11-17 Andrew Burgess <aburgess@redhat.com>
+
+ gdb/fortran/testsuite: print values and types of string variables
+ While looking through the Fortran tests, I couldn't find a test of GDB
+ printing the value and type of a Fortran string defined using the
+ 'character*SIZE' notation.
+
+ This works fine in GDB right now, but I thought it wouldn't hurt to
+ have a test for this, so this commit adds such a test.
+
+ The test also includes printing a string that includes some embedded
+ special characters: \n \r \t \000 - that's right, as Fortran strings
+ are stored as an address and length, it is fine to include an embedded
+ null, so this test includes an example of that.
+
+ Standard Fortran doesn't support backslash escape sequences within
+ strings, the special characters must be generated using the `achar`
+ function. However, when GDB prints the strings we currently print
+ using the standard C like backslash sequences.
+
+ I'm not currently proposing to change that behaviour, the backslash
+ sequences are more compact than the standard Fortran way of doing
+ things, and are so widely used that I suspect most Fortran programmers
+ will understand them.
+
+2022-11-17 Rainer Orth <ro@CeBiTec.Uni-Bielefeld.DE>
+
+ Fix various procfs.c compilation errors
+ procfs.c has accumulated several compilation errors lately (some of them
+ new with GCC 12), which are fixed by this patch:
+
+ * auxv_parse gets:
+
+ /vol/src/gnu/gdb/hg/master/dist/gdb/procfs.c:144:7: error: \91int
+ procfs_target::auxv_parse(gdb_byte**, gdb_byte*, CORE_ADDR*, CORE_ADDR*)\92
+ marked \91override\92, but does not override
+ 144 | int auxv_parse (gdb_byte **readptr,
+ | ^~~~~~~~~~
+
+ Obviouly, procfs.c was missed in the auxv_parse constification.
+
+ * dead_procinfo has:
+
+ /vol/src/gnu/gdb/hg/master/dist/gdb/procfs.c: In function \91void
+ dead_procinfo(procinfo*, const char*, int)\92:
+ /vol/src/gnu/gdb/hg/master/dist/gdb/procfs.c:563:11: warning: the address
+ of \91procinfo::pathname\92 will never be NULL [-Waddress]
+ 563 | if (pi->pathname)
+ | ~~~~^~~~~~~~
+ /vol/src/gnu/gdb/hg/master/dist/gdb/procfs.c:238:8: note:
+ \91procinfo::pathname\92 declared here
+ 238 | char pathname[MAX_PROC_NAME_SIZE]; /* Pathname to /proc entry */
+ | ^~~~~~~~
+
+ The warning is correct, so the code can lose support for the NULL
+ pathname case.
+
+ * create_inferior has this ugly warning:
+
+ /vol/src/gnu/gdb/hg/master/dist/gdb/procfs.c: In member function \91virtual void procfs_target::create_inferior(const char*, const std::string&, char**, int)\92:
+ /vol/src/gnu/gdb/hg/master/dist/gdb/procfs.c:2815:19: warning: \91char* std::strncpy(char*, const char*, size_t)\92 output truncated before terminating nul copying as many bytes from a string as its length [-Wstringop-truncation]
+ 2815 | strncpy (tryname, p, len);
+ | ~~~~~~~~^~~~~~~~~~~~~~~~~
+ /vol/src/gnu/gdb/hg/master/dist/gdb/procfs.c:2814:26: note: length computed here
+ 2814 | len = strlen (p);
+ | ~~~~~~~^~~
+
+ It seems that this is another case of GCC PR middle-end/88059, which
+ Martin Sebor refuses to fix. So I'm using the hack suggested in the
+ PR to use memcpy instead of strncpy.
+
+ * find_memory_regions_callback fails with
+
+ /vol/src/gnu/gdb/hg/master/dist/gdb/procfs.c: In function \91int find_memory_regions_callback(prmap*, find_memory_region_ftype, void*)\92:
+ /vol/src/gnu/gdb/hg/master/dist/gdb/procfs.c:3167:18: error: too few arguments to function
+ 3167 | return (*func) ((CORE_ADDR) map->pr_vaddr,
+ | ~~~~~~~~^~~~~~~~~~~~~~~~~~~~~~~~~~~
+ 3168 | map->pr_size,
+ | ~~~~~~~~~~~~~
+ 3169 | (map->pr_mflags & MA_READ) != 0,
+ | ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+ 3170 | (map->pr_mflags & MA_WRITE) != 0,
+ | ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+ 3171 | (map->pr_mflags & MA_EXEC) != 0,
+ | ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+ 3172 | 1, /* MODIFIED is unknown, pass it as true. */
+ | ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+ 3173 | data);
+ | ~~~~~
+
+ Again, procfs.c was overlooked when adding the new memory_tagged arg.
+ Unfortunately, it wasn't even documented in gdb/defs.h when it was
+ added in
+
+ commit 68cffbbd4406b4efe1aa6e18460b1d7ca02549f1
+ Author: Luis Machado <luis.machado@arm.com>
+ Date: Thu Mar 31 11:42:35 2022 +0100
+
+ [AArch64] MTE corefile support
+
+ With those changes, procfs.c compiles again. Together with the hack
+ from the Solaris gdbsupport breakage reported in PR build/29791, I was
+ able to build and test gdb on both amd64-pc-solaris2.11 and
+ sparcv9-sun-solaris2.11.
+
+ Approved-By: Simon Marchi <simon.marchi@efficios.com>
+
+2022-11-17 Christoph Müllner <christoph.muellner@vrull.eu>
+
+ RISC-V: Add T-Head Int vendor extension
+ This patch adds the XTheadInt extension, which provides interrupt
+ stack management instructions.
+
+ The XTheadFmv extension is documented in the RISC-V toolchain
+ contentions:
+ https://github.com/riscv-non-isa/riscv-toolchain-conventions
+
+ Co-developed-by: Lifang Xia <lifang_xia@linux.alibaba.com>
+
+2022-11-17 Christoph Müllner <christoph.muellner@vrull.eu>
+
+ RISC-V: Add T-Head Fmv vendor extension
+ This patch adds the XTheadFmv extension, which allows to access the
+ upper 32 bits of a double-precision floating-point register in RV32.
+
+ The XTheadFmv extension is documented in the RISC-V toolchain
+ contentions:
+ https://github.com/riscv-non-isa/riscv-toolchain-conventions
+
+ Co-developed-by: Lifang Xia <lifang_xia@linux.alibaba.com>
+
+2022-11-17 Tom de Vries <tdevries@jostaberry-8.arch.suse.de>
+
+ [gdb/testsuite] Fix DUPLICATE in gdb.arch/ppc-fp.exp
+ I noticed:
+ ...
+ DUPLICATE: gdb.arch/ppc-fp.exp: next
+ ...
+
+ Fix this by adding unique test names.
+
+ Tested on powerpc64le-linux.
+
+2022-11-17 GDB Administrator <gdbadmin@sourceware.org>
+
+ Automatic date update in version.in
+
+2022-11-16 Kévin Le Gouguec <legouguec@adacore.com>
+
+ Add myself to the gdb/MAINTAINERS write-after-approval list
+
+2022-11-16 Kévin Le Gouguec <legouguec@adacore.com>
+
+ Guard against frame.c destructors running before frame-info.c's
+ On x86_64-windows, since 04e2ac7b2a7, we observe this internal error:
+
+ [...]/gdbsupport/intrusive_list.h:458: internal-error: erase_element:
+ Assertion `elem_node->prev != INTRUSIVE_LIST_UNLINKED_VALUE' failed.
+
+ Breaking in the destructors for intrusive_list and frame_info_ptr shows that
+ in this configuration, the destructors for frame.c's statically-stored
+ objects are run before frame-info.c's:
+
+ Thread 1 hit Breakpoint 7, intrusive_list<frame_info_ptr,
+ intrusive_base_node<frame_info_ptr> >::~intrusive_list (this=0x7ff69c418c90
+ <frame_info_ptr::frame_list>, __in_chrg=<optimized out>)
+ [...]/../gdbsupport/intrusive_list.h:250
+ 250 clear ();
+ (gdb) bt
+ #0 intrusive_list<frame_info_ptr, intrusive_base_node<frame_info_ptr> >
+ ::~intrusive_list (this=0x7ff69c418c90 <frame_info_ptr::frame_list>,
+ __in_chrg=<optimized out>) [...]/../gdbsupport/intrusive_list.h:250
+ #1 0x00007ff69b78edba in __tcf_1 () [...]/frame-info.c:27
+ #2 0x00007ff9c457aa9f in msvcrt!_initterm_e ()
+ from C:\Windows\System32\msvcrt.dll
+ #3 0x00007ff69b8246a6 in captured_main_1 (context=0x5ffe00)
+ [...]/main.c:1111
+ #4 0x00007ff69b825149 in captured_main (data=0x5ffe00) [...]/main.c:1320
+ #5 0x00007ff69b8251b1 in gdb_main (args=0x5ffe00) [...]/main.c:1345
+ #6 0x00007ff69b5d1730 in main (argc=2, argv=0x751730) [...]/gdb.c:32
+ (gdb) c
+ Continuing.
+
+ Thread 1 hit Breakpoint 8, frame_info_ptr::~frame_info_ptr
+ (this=0x7ff69c418e20 <selected_frame>, __in_chrg=<optimized out>)
+ [...]/frame-info.h:74
+ 74 if (is_linked ())
+ (gdb) bt
+ #0 frame_info_ptr::~frame_info_ptr (this=0x7ff69c418e20 <selected_frame>,
+ __in_chrg=<optimized out>) [...]/frame-info.h:74
+ #1 0x00007ff69b79a643 in __tcf_1 () [...]/frame.c:1675
+ #2 0x00007ff9c457aa9f in msvcrt!_initterm_e () from
+ C:\Windows\System32\msvcrt.dll
+ #3 0x00007ff69b8246a6 in captured_main_1 (context=0x5ffe00)
+ [...]/main.c:1111
+ #4 0x00007ff69b825149 in captured_main (data=0x5ffe00) [...]/main.c:1320
+ #5 0x00007ff69b8251b1 in gdb_main (args=0x5ffe00) [...]/main.c:1345
+ #6 0x00007ff69b5d1730 in main (argc=2, argv=0x751730) [...]/gdb.c:32
+
+ Approved-By: Simon Marchi <simon.marchi@efficios.com>
+
+2022-11-16 Vladimir Mezentsev <vladimir.mezentsev@oracle.com>
+
+ PR29788, gprofng cannot display Java's generated assembly code
+ gprofng/ChangeLog
+ 2022-11-15 Vladimir Mezentsev <vladimir.mezentsev@oracle.com>
+
+ PR gprofng/29788
+ * src/Experiment.h: Declare dyntext_name.
+ * src/Experiment.cc: Use dyntext_name to initialize img_fname.
+
+2022-11-16 Tom de Vries <tdevries@suse.de>
+
+ [gdb/testsuite] Use gdb_gcore_cmd in gdb.threads/gcore-thread.exp
+ I noticed a plain gcore command in test-case gdb.threads/gcore-thread.exp:
+ ...
+ gdb_test "gcore $core0file" "Saved corefile .*" \
+ "save a zeroed-threads corefile"
+ ...
+
+ Use gdb_gcore_cmd instead.
+
+ Tested on x86_64-linux.
+
+2022-11-16 Carl Love <cel@us.ibm.com>
+
+ Bug fix in commit for printing the function return value for non-trivial values
+ The recent commit:
+
+ commit a0eda3df5b750ae32576a9be092b361281a41787
+ Author: Carl Love <cel@us.ibm.com>
+ Date: Mon Nov 14 16:22:37 2022 -0500
+
+ PowerPC, fix support for printing the function return value for non-trivial values.
+
+ Is generating a segmentation fault on x86_64-linux.
+
+ segfault:
+ ...
+ PASS: gdb.asm/asm-source.exp: info source asmsrc1.s
+ ERROR: GDB process no longer exists
+ UNRESOLVED: gdb.asm/asm-source.exp: finish from foo3
+ ...
+
+ Reproduced on command line:
+ ...
+ $ gdb -q -batch -x outputs/gdb.asm/asm-source/gdb.in.1
+ ...
+
+ The problem seems to be that:
+ ...
+ Thread 1 "gdb" received signal SIGSEGV, Segmentation fault.
+ 0x000000000043de7a in symbol::type (this=0x0) at
+ .../gdb_versions/devel/src/gdb/symtab.h:1287
+ 1287 return m_type;
+ ...
+ because:
+ ...
+ (gdb) up
+ #1 0x0000000000852d94 in finish_command (arg=0x0, from_tty=0)
+ at .../gdb_versions/devel/src/gdb/infcmd.c:1887
+ 1887 = check_typedef (sm->function->type ()->target_type ());
+ (gdb) p sm->function
+ $1 = (symbol *) 0x0
+
+ The code is not checking if sm->function is NULL. If sm->function is NULL
+ the check for the return buffer should be skipped.
+
+2022-11-16 Tom Tromey <tromey@adacore.com>
+
+ Update Ada tasks documentation
+ My co-worker Kévin noticed that the Ada tasks documentation is
+ slightly out of date -- it does not document all the states that can
+ be reported by ada-tasks.c.
+
+ This patch adds the missing states to the appropriate node, and
+ updates one state to reflect a change made some time ago.
+
+2022-11-16 Pedro Alves <palves@redhat.com>
+
+ gdb: add "set style tui-current-position on|off", default to off
+ As discussed at:
+
+ https://sourceware.org/pipermail/gdb-patches/2020-June/169519.html
+
+ this patch disables source and assembly code highlighting for the
+ text highlighted by the TUI's current position indicator, and adds a
+ command to enable it back.
+
+2022-11-16 Tom de Vries <tdevries@suse.de>
+
+ [gdb/testsuite] Modernize gdb.arch/i386-biarch-core.exp
+ I noticed in test-case gdb.arch/i386-biarch-core.exp that we run into the
+ completion limit for "complete set gnutarget":
+ ...
+ set gnutarget vms-libtxt^M
+ set gnutarget *** List may be truncated, max-completions reached. ***^M
+ (gdb) PASS: gdb.arch/i386-biarch-core.exp: complete set gnutarget
+ ...
+
+ Fix this by using get_set_option_choices.
+
+ Also use get_set_option_choices for "complete set architecture i386", which
+ required extending get_set_option_choices to accept a second argument, such
+ that we can do:
+ ...
+ set archs [get_set_option_choices "set architecture" "i386"]
+ ...
+ because this returns an empty list:
+ ...
+ set archs [get_set_option_choices "set architecture i386"]
+ ...
+ because it does "complete set architecture i386 ".
+
+ Also clean up the explicit gdb_exit/gdb_start and use clean_restart instead.
+
+ Tested on x86_64-linux.
+
+2022-11-16 Tom de Vries <tdevries@suse.de>
+
+ [gdb/testsuite] Fix gdb.arch/ppc64-symtab-cordic.exp without bzip2
+ After de-installing bzip2, I run into:
+ ...
+ Running ppc64-symtab-cordic.exp ...
+ sh: bzip2: command not found
+ PATH: gdb.arch/ppc64-symtab-cordic.exp: failed bzip2 for \
+ src/gdb/testsuite/gdb.arch/cordic.ko.bz2
+ ...
+
+ Fix these by:
+ - using remote_exec instead of catch system, and
+ - using file tail in the untested message.
+
+ I've tried making output redirection work with remote_exec, but that seems to
+ be broken, so we now:
+ - copy the file $f.bz2 into the desired location $dir/$f.bz2, and
+ - decompress the bz2 file using "bzip2 -df $dir/$f.bz2", resulting in a file
+ $dir/$f.
+
+ Factor out new function decompress_bz2 to make the test-case less verbose, and
+ also use it in gdb.arch/i386-biarch-core.exp.
+
+ Tested on x86_64-linux, without and with bzip2 installed.
+
+2022-11-16 GDB Administrator <gdbadmin@sourceware.org>
+
+ Automatic date update in version.in
+
+2022-11-15 Indu Bhagat <indu.bhagat@oracle.com>
+
+ doc: add SFrame spec file
+ ChangeLog:
+
+ * libsframe/Makefile.am: Add info-in-builddir to
+ AUTOMAKE_OPTIONS. Include doc/local.mk.
+ * libsframe/Makefile.in: Regenerated.
+ * libsframe/configure: Likewise.
+ * libsframe/configure.ac: Check for makeinfo and set BUILD_INFO.
+ * libsframe/doc/local.mk: New file.
+ * libsframe/doc/sframe-spec.texi: Likewise.
+
+2022-11-15 Indu Bhagat <indu.bhagat@oracle.com>
+
+ gas/NEWS: add text about new command line option and SFrame support
+ ChangeLog:
+
+ * gas/NEWS: Add SFrame related news.
+
+2022-11-15 Indu Bhagat <indu.bhagat@oracle.com>
+
+ binutils/NEWS: add text for SFrame support
+ ChangeLog:
+
+ * binutils/NEWS: Add item for SFrame support.
+
+2022-11-15 Indu Bhagat <indu.bhagat@oracle.com>
+
+ src-release.sh: Add libsframe
+ Add libsframe to the list of top level directories that will be included
+ in a release.
+
+ ChangeLog:
+
+ * src-release.sh: Add libsframe
+
+2022-11-15 Indu Bhagat <indu.bhagat@oracle.com>
+
+ readelf/objdump: support for SFrame section
+ This patch adds support for SFrame in readelf and objdump. The arguments
+ of --sframe are optional for both readelf and objdump.
+
+ include/ChangeLog:
+
+ * sframe-api.h (dump_sframe): New function declaration.
+
+ ChangeLog:
+
+ * binutils/Makefile.am: Add dependency on libsframe for
+ readelf and objdump.
+ * binutils/Makefile.in: Regenerate.
+ * binutils/doc/binutils.texi: Document --sframe=[section].
+ * binutils/doc/sframe.options.texi: New file.
+ * binutils/objdump.c: Add support for SFrame format.
+ * binutils/readelf.c: Likewise.
+ * include/sframe-api.h: Add new API for dumping .sframe
+ section.
+ * libsframe/Makefile.am: Add sframe-dump.c.
+ * libsframe/Makefile.in: Regenerate.
+ * libsframe/sframe-dump.c: New file.
+
+2022-11-15 Indu Bhagat <indu.bhagat@oracle.com>
+
+ bfd: linker: merge .sframe sections
+ The linker merges all the input .sframe sections. When merging, the
+ linker verifies that all the input .sframe sections have the same
+ abi/arch.
+
+ The linker uses libsframe library to perform key actions on the
+ .sframe sections - decode, read, and create output data. This
+ implies buildsystem changes to make and install libsframe before
+ libbfd.
+
+ The linker places the output .sframe section in a new segment of its
+ own: PT_GNU_SFRAME. A new segment is not added, however, if the
+ generated .sframe section is empty.
+
+ When a section is discarded from the final link, the corresponding
+ entries in the .sframe section for those functions are also deleted.
+
+ The linker sorts the SFrame FDEs on start address by default and sets
+ the SFRAME_F_FDE_SORTED flag in the .sframe section.
+
+ This patch also adds support for generation of SFrame unwind
+ information for the .plt* sections on x86_64. SFrame unwind info is
+ generated for IBT enabled PLT, lazy/non-lazy PLT.
+
+ The existing linker option --no-ld-generated-unwind-info has been
+ adapted to include the control of whether .sframe unwind information
+ will be generated for the linker generated sections like PLT.
+
+ Changes to the linker script have been made as necessary.
+
+ ChangeLog:
+
+ * Makefile.def: Add install dependency on libsframe for libbfd.
+ * Makefile.in: Regenerated.
+ * bfd/Makefile.am: Add elf-sframe.c
+ * bfd/Makefile.in: Regenerated.
+ * bfd/bfd-in2.h (SEC_INFO_TYPE_SFRAME): Regenerated.
+ * bfd/configure: Regenerate.
+ * bfd/configure.ac: Add elf-sframe.lo.
+ * bfd/elf-bfd.h (struct sframe_func_bfdinfo): New struct.
+ (struct sframe_dec_info): Likewise.
+ (struct sframe_enc_info): Likewise.
+ (struct elf_link_hash_table): New member for encoded .sframe
+ object.
+ (struct output_elf_obj_tdata): New member.
+ (elf_sframe): New access macro.
+ (_bfd_elf_set_section_sframe): New declaration.
+ * bfd/elf.c (get_segment_type): Handle new segment
+ PT_GNU_SFRAME.
+ (bfd_section_from_phdr): Likewise.
+ (get_program_header_size): Likewise.
+ (_bfd_elf_map_sections_to_segments): Likewise.
+ * bfd/elf64-x86-64.c (elf_x86_64_link_setup_gnu_properties): Add
+ contents to the .sframe sections or .plt* entries.
+ * bfd/elflink.c (elf_section_ignore_discarded_relocs): Handle
+ SEC_INFO_TYPE_SFRAME.
+ (_bfd_elf_default_action_discarded): Handle .sframe section.
+ (elf_link_input_bfd): Merge .sframe section.
+ (bfd_elf_final_link): Write the output .sframe section.
+ (bfd_elf_discard_info): Handle discarding .sframe section.
+ * bfd/elfxx-x86.c (_bfd_x86_elf_size_dynamic_sections): Create
+ .sframe section for .plt and .plt.sec.
+ (_bfd_x86_elf_finish_dynamic_sections): Handle .sframe from
+ .plt* sections.
+ * bfd/elfxx-x86.h (PLT_SFRAME_FDE_START_OFFSET): New
+ definition.
+ (SFRAME_PLT0_MAX_NUM_FRES): Likewise.
+ (SFRAME_PLTN_MAX_NUM_FRES): Likewise.
+ (struct elf_x86_sframe_plt): New structure.
+ (struct elf_x86_link_hash_table): New member.
+ (struct elf_x86_init_table): New members for .sframe
+ creation.
+ * bfd/section.c: Add new definition SEC_INFO_TYPE_SFRAME.
+ * binutils/readelf.c (get_segment_type): Handle new segment
+ PT_GNU_SFRAME.
+ * ld/ld.texi: Update documentation for
+ --no-ld-generated-unwind-info.
+ * ld/scripttempl/elf.sc: Support .sframe sections.
+ * ld/Makefile.am (TESTSFRAMELIB): Use it.
+ (check-DEJAGNU): Likewise.
+ * ld/Makefile.in: Regenerated.
+ * ld/configure.ac (TESTSFRAMELIB): Set to the .so or .a like TESTBFDLIB.
+ * ld/configure: Regenerated.
+ * bfd/elf-sframe.c: New file.
+
+ include/ChangeLog:
+
+ * elf/common.h (PT_GNU_SFRAME): New definition.
+ * elf/internal.h (struct elf_segment_map): Handle new segment
+ type PT_GNU_SFRAME.
+
+ ld/testsuite/ChangeLog:
+
+ * ld/testsuite/ld-bootstrap/bootstrap.exp: Add SFRAMELIB.
+ * ld/testsuite/ld-aarch64/aarch64-elf.exp: Add new test
+ sframe-simple-1.
+ * ld/testsuite/ld-aarch64/sframe-bar.s: New file.
+ * ld/testsuite/ld-aarch64/sframe-foo.s: Likewise.
+ * ld/testsuite/ld-aarch64/sframe-simple-1.d: Likewise.
+ * ld/testsuite/ld-sframe/sframe-empty.d: New test.
+ * ld/testsuite/ld-sframe/sframe-empty.s: New file.
+ * ld/testsuite/ld-sframe/sframe.exp: New testsuite.
+ * ld/testsuite/ld-x86-64/sframe-bar.s: New file.
+ * ld/testsuite/ld-x86-64/sframe-foo.s: Likewise.
+ * ld/testsuite/ld-x86-64/sframe-simple-1.d: Likewise.
+ * ld/testsuite/ld-x86-64/sframe-plt-1.d: Likewise.
+ * ld/testsuite/ld-x86-64/sframe-simple-1.d: Likewise.
+ * ld/testsuite/ld-x86-64/x86-64.exp: Add new tests -
+ sframe-simple-1, sframe-plt-1.
+ * ld/testsuite/lib/ld-lib.exp: Add new proc to check if
+ assembler supports SFrame section.
+ * ld/testsuite/ld-sframe/discard.d: New file.
+ * ld/testsuite/ld-sframe/discard.ld: Likewise.
+ * ld/testsuite/ld-sframe/discard.s: Likewise.
+
+2022-11-15 Weimin Pan <weimin.pan@oracle.com>
+
+ libsframe: add the SFrame library
+ libsframe is a library that allows you to:
+ - decode a .sframe section
+ - probe and inspect a .sframe section
+ - encode (and eventually write) a .sframe section.
+
+ This library is currently being used by the linker, readelf, objdump.
+ This library will also be used by the SFrame unwinder which is still
+ to be upstream'd.
+
+ The file include/sframe-api.h defines the user-facing APIs for decoding,
+ encoding and probing .sframe sections. A set of error codes together
+ with their error message strings are also defined.
+
+ Endian flipping is performed automatically at read and write time, if
+ cross-endianness is detected.
+
+ ChangeLog:
+
+ * Makefile.def: Add libsframe as new module with its
+ dependencies.
+ * Makefile.in: Regenerated.
+ * binutils/Makefile.am: Add libsframe.
+ * binutils/Makefile.in: Regenerated.
+ * configure: Regenerated
+ * configure.ac: Add libsframe to host_libs.
+ * libsframe/Makefile.am: New file.
+ * libsframe/Makefile.in: New file.
+ * libsframe/aclocal.m4: New file.
+ * libsframe/config.h.in: New file.
+ * libsframe/configure: New file.
+ * libsframe/configure.ac: New file.
+ * libsframe/sframe-error.c: New file.
+ * libsframe/sframe-impl.h: New file.
+ * libsframe/sframe.c: New file.
+
+ include/ChangeLog:
+
+ * sframe-api.h: New file.
+
+ testsuite/ChangeLog:
+
+ * libsframe/testsuite/Makefile.am: New file.
+ * libsframe/testsuite/Makefile.in: Regenerated.
+ * libsframe/testsuite/libsframe.decode/Makefile.am: New
+ file.
+ * libsframe/testsuite/libsframe.decode/Makefile.in:
+ Regenerated.
+ * libsframe/testsuite/libsframe.decode/decode.exp: New file.
+ * libsframe/testsuite/libsframe.encode/Makefile.am:
+ Likewise.
+ * libsframe/testsuite/libsframe.encode/Makefile.in:
+ Regenerated.
+ * libsframe/testsuite/libsframe.encode/encode.exp: New file.
+ * libsframe/testsuite/libsframe.encode/encode-1.c: Likewise.
+ * libsframe/testsuite/libsframe.decode/be-flipping.c: Likewise.
+ * libsframe/testsuite/libsframe.decode/frecnt-1.c: Likewise.
+ * libsframe/testsuite/libsframe.decode/frecnt-2.c: Likewise.
+ * libsframe/testsuite/libsframe.decode/DATA-BE: New file.
+ * libsframe/testsuite/libsframe.decode/DATA1: Likewise.
+ * libsframe/testsuite/libsframe.decode/DATA2: Likewise.
+
+2022-11-15 Indu Bhagat <indu.bhagat@oracle.com>
+
+ gas: testsuite: add new tests for SFrame unwind info
+ Earlier these tests were in the same commit as previous which adds the
+ support in GNU assembler to generate .sframe section from CFI
+ directives. Splitting this out here for ease of applying and testing.
+
+ ChangeLog:
+
+ * gas/testsuite/gas/cfi-sframe/cfi-sframe-aarch64-1.d: New file.
+ * gas/testsuite/gas/cfi-sframe/cfi-sframe-aarch64-1.s: Likewise.
+ * gas/testsuite/gas/cfi-sframe/cfi-sframe-common-1.d: Likewise.
+ * gas/testsuite/gas/cfi-sframe/cfi-sframe-common-1.s: Likewise.
+ * gas/testsuite/gas/cfi-sframe/cfi-sframe-common-2.d: Likewise.
+ * gas/testsuite/gas/cfi-sframe/cfi-sframe-common-2.s: Likewise.
+ * gas/testsuite/gas/cfi-sframe/cfi-sframe-common-3.d: Likewise.
+ * gas/testsuite/gas/cfi-sframe/cfi-sframe-common-3.s: Likewise.
+ * gas/testsuite/gas/cfi-sframe/cfi-sframe-common-4.d: Likewise.
+ * gas/testsuite/gas/cfi-sframe/cfi-sframe-common-4.s: Likewise.
+ * gas/testsuite/gas/cfi-sframe/cfi-sframe-common-5.d: Likewise.
+ * gas/testsuite/gas/cfi-sframe/cfi-sframe-common-5.s: Likewise.
+ * gas/testsuite/gas/cfi-sframe/cfi-sframe-common-6.d: Likewise.
+ * gas/testsuite/gas/cfi-sframe/cfi-sframe-common-6.s: Likewise.
+ * gas/testsuite/gas/cfi-sframe/cfi-sframe-common-7.d: Likewise.
+ * gas/testsuite/gas/cfi-sframe/cfi-sframe-common-7.s: Likewise.
+ * gas/testsuite/gas/cfi-sframe/cfi-sframe-common-8.d: Likewise.
+ * gas/testsuite/gas/cfi-sframe/cfi-sframe-common-8.s: Likewise.
+ * gas/testsuite/gas/cfi-sframe/cfi-sframe-x86_64-1.d: Likewise.
+ * gas/testsuite/gas/cfi-sframe/cfi-sframe-x86_64-1.s: Likewise.
+ * gas/testsuite/gas/cfi-sframe/cfi-sframe.exp: Likewise.
+ * gas/testsuite/gas/cfi-sframe/common-empty-1.d: Likewise.
+ * gas/testsuite/gas/cfi-sframe/common-empty-1.s: Likewise.
+ * gas/testsuite/gas/cfi-sframe/common-empty-2.d: Likewise.
+ * gas/testsuite/gas/cfi-sframe/common-empty-2.s: Likewise.
+ * gas/testsuite/gas/cfi-sframe/common-empty-3.d: Likewise.
+ * gas/testsuite/gas/cfi-sframe/common-empty-3.s: Likewise.
+ * gas/testsuite/gas/cfi-sframe/common-empty-4.d: Likewise.
+ * gas/testsuite/gas/cfi-sframe/common-empty-4.s: Likewise.
+
+2022-11-15 Indu Bhagat <indu.bhagat@oracle.com>
+
+ gas: generate .sframe from CFI directives
+ Currently supported for x86_64 and aarch64 only.
+
+ [PS: Currently, the compiler has not been adapted to generate
+ ".cfi_sections" with ".sframe" in it. The newly added command line
+ option of --gsframe provides an easy way to try out .sframe support
+ in the toolchain.]
+
+ gas interprets the CFI directives to generate DWARF-based .eh_frame
+ info. These internal DWARF structures are now consumed by
+ gen-sframe.[ch] sub-system to, in turn, create the SFrame unwind
+ information. These internal DWARF structures are read-only for the
+ purpose of SFrame unwind info generation.
+
+ SFrame unwind info generation does not impact .eh_frame unwind info
+ generation. Both .eh_frame and .sframe can co-exist in an ELF file,
+ if so desired by the user.
+
+ Recall that SFrame unwind information only contains the minimal
+ necessary information to generate backtraces and does not provide
+ information to recover all callee-saved registers. The reason being
+ that callee-saved registers other than FP are not needed for stack
+ unwinding, and hence are not included in the .sframe section.
+
+ Consequently, gen-sframe.[ch] only needs to interpret a subset of
+ DWARF opcodes in gas. More details follow.
+
+ [Set 1, Interpreted] The following opcodes are interpreted:
+ - DW_CFA_advance_loc
+ - DW_CFA_def_cfa
+ - DW_CFA_def_cfa_register
+ - DW_CFA_def_cfa_offset
+ - DW_CFA_offset
+ - DW_CFA_remember_state
+ - DW_CFA_restore_state
+ - DW_CFA_restore
+
+ [Set 2, Bypassed] The following opcodes are acknowledged but are not
+ necessary for generating SFrame unwind info:
+ - DW_CFA_undefined
+ - DW_CFA_same_value
+
+ Anything else apart from the two above-mentioned sets is skipped
+ altogether. This means that any function containing a CFI directive not
+ in Set 1 or Set 2 above, will not have any SFrame unwind information
+ generated for them. Holes in instructions covered by FREs of a single
+ FDE are not representable in the SFrame unwind format.
+
+ As few examples, following opcodes are not processed for .sframe
+ generation, and are skipped:
+ - .cfi_personality*
+ - .cfi_*lsda
+ - .cfi_escape
+ - .cfi_negate_ra_state
+ - ...
+
+ Not processing .cfi_escape, .cfi_negate_ra_state will cause SFrame
+ unwind information to be absent for SFrame FDEs that contain these CFI
+ directives, hence affecting the asynchronicity.
+
+ x86-64 and aarch64 backends need to have a few new definitions and
+ functions for .sframe generation. These provide gas with architecture
+ specific information like the SP/FP/RA register numbers and an
+ SFrame-specific ABI marker.
+
+ Lastly, the patch also implements an optimization for size, where
+ specific fragments containing SFrame FRE start address and SFrame FDE
+ function are fixed up. This is similar to other similar optimizations
+ in gas, where fragments are sized and fixed up when the associated
+ symbols can be resolved. This optimization is controlled by a #define
+ SFRAME_FRE_TYPE_SELECTION_OPT and should be easy to turn off if needed.
+ The optimization is on by default for both x86_64 and aarch64.
+
+ ChangeLog:
+
+ * gas/Makefile.am: Include gen-sframe.c and sframe-opt.c.
+ * gas/Makefile.in: Regenerated.
+ * gas/as.h (enum _relax_state): Add new state rs_sframe.
+ (sframe_estimate_size_before_relax): New function.
+ (sframe_relax_frag): Likewise.
+ (sframe_convert_frag): Likewise.
+ * gas/config/tc-aarch64.c (aarch64_support_sframe_p): New
+ definition.
+ (aarch64_sframe_ra_tracking_p): Likewise.
+ (aarch64_sframe_cfa_ra_offset): Likewise.
+ (aarch64_sframe_get_abi_arch): Likewise.
+ (md_begin): Set values of sp/fp/ra registers.
+ * gas/config/tc-aarch64.h (aarch64_support_sframe_p): New
+ declaration.
+ (support_sframe_p): Likewise.
+ (SFRAME_CFA_SP_REG): Likewise.
+ (SFRAME_CFA_FP_REG): Likewise.
+ (SFRAME_CFA_RA_REG): Likewise.
+ (aarch64_sframe_ra_tracking_p): Likewise.
+ (sframe_ra_tracking_p): Likewise.
+ (aarch64_sframe_cfa_ra_offset): Likewise.
+ (sframe_cfa_ra_offset): Likewise.
+ (aarch64_sframe_get_abi_arch): Likewise.
+ (sframe_get_abi_arch): Likewise.
+ * gas/config/tc-i386.c (x86_support_sframe_p): New definition.
+ (x86_sframe_ra_tracking_p): Likewise.
+ (x86_sframe_cfa_ra_offset): Likewise.
+ (x86_sframe_get_abi_arch): Likewise.
+ * gas/config/tc-i386.h (x86_support_sframe_p): New declaration.
+ (support_sframe_p): Likewise.
+ (SFRAME_CFA_SP_REG): Likewise.
+ (SFRAME_CFA_FP_REG): Likewise.
+ (x86_sframe_ra_tracking_p): Likewise.
+ (sframe_ra_tracking_p): Likewise.
+ (x86_sframe_cfa_ra_offset): Likewise.
+ (sframe_cfa_ra_offset): Likewise.
+ (x86_sframe_get_abi_arch): Likewise.
+ (sframe_get_abi_arch): Likewise.
+ * gas/config/tc-xtensa.c (unrelaxed_frag_max_size): Add case for
+ rs_sframe.
+ * gas/doc/as.texi: Add .sframe to the documentation for
+ .cfi_sections.
+ * gas/dw2gencfi.c (cfi_finish): Create a .sframe section.
+ * gas/dw2gencfi.h (CFI_EMIT_sframe): New definition.
+ * gas/write.c (cvt_frag_to_fill): Handle rs_sframe.
+ (relax_segment): Likewise.
+ * gas/gen-sframe.c: New file.
+ * gas/gen-sframe.h: New file.
+ * gas/sframe-opt.c: New file.
+
+2022-11-15 Indu Bhagat <indu.bhagat@oracle.com>
+
+ gas: add new command line option --gsframe
+ When --gsframe is specified, the assembler will generate a .sframe
+ section from the CFI directives in the assembly.
+
+ ChangeLog:
+
+ * gas/as.c (parse_args): Parse args and set flag_gen_sframe.
+ * gas/as.h: Introduce skeleton for --gsframe.
+ * gas/doc/as.texi: document --gsframe.
+
+2022-11-15 Indu Bhagat <indu.bhagat@oracle.com>
+
+ sframe.h: Add SFrame format definition
+ The header sframe.h defines the SFrame format.
+
+ The SFrame format is the Simple Frame format. It can be used to
+ represent the minimal necessary unwind information required for
+ backtracing. The current version supports AMD64 and AARCH64.
+
+ More details of the SFrame format are included in the documentation
+ of the header file in this patch.
+
+ include/ChangeLog:
+ * sframe.h: New file.
+
+2022-11-15 Alan Modra <amodra@gmail.com>
+
+ Re: [gas] arm: Add support for new unwinder directive ".pacspval".
+ * testsuite/gas/arm/ehabi-pacbti-m.d: Limit test to ELF.
+
+2022-11-15 Alan Modra <amodra@gmail.com>
+
+ aarch64-pe can't fill 16 bytes in section .text
+ Without commit b66e671854, this:
+ .p2align 4
+ nop
+ .p2align 3
+ nop
+ results in an error when coff_frob_section attempts to pad out the
+ section to a 16-byte boundary. Due to miscalculating the pad pattern
+ repeat count, write.c:write_contents attempts to shove 16 bytes of
+ padding into the remaining 4 bytes of the .text section.
+
+ * config/obj-coff.c (coff_frob_section): Correct fill count.
+ Don't pad after errors.
+
+2022-11-15 Jose E. Marchesi <jose.marchesi@oracle.com>
+
+ gdb/configure: regenerate
+ The commit bbaabc767a4293492817a0840819aef2768cce90 introduced an
+ incorrect thunk for the `configure' script. This patch regenerates
+ configure by calling autoreconf.
+
+2022-11-15 Jose E. Marchesi <jose.marchesi@oracle.com>
+
+ gdb: use libtool in GDB_AC_CHECK_BFD
+ The GDB_AC_CHECK_BFD macro defined in gdb/acinclude.m4 uses the
+ AC_LINK_IFELSE autoconf macro in order to link a simple program to
+ check features of libbfd.
+
+ If libbfd's link dependencies change, it was necessary to reflect them
+ either in the definition of the macro, or as a consequence of checking
+ for them with an autoconf macro resulting in an addition to LIBS.
+
+ This patch modifies the definition of the GDB_CHECK_BFD macro in order
+ to use libtool to perform the test link. This makes it possible to
+ not have to list dependencies of libbfd (which are indirect to GDB) at
+ all.
+
+ After this patch:
+
+ configure:28553: checking for ELF support in BFD
+ configure:28573: ./libtool --quiet --mode=link gcc -o conftest \
+ -I../../gdb/../include -I../bfd \
+ -I../../gdb/../bfd -g -O2 \
+ -L../bfd -L../libiberty conftest.c -lbfd -liberty \
+ -lncursesw -lm -ldl >&5
+ configure:28573: $? = 0
+ configure:28583: result: yes
+
+ Tests performed:
+
+ - Configure --with-system-zlib and --without-system-zlib.
+ - Check link dependencies of installed GDB with both --enable-shared
+ and --disable-shared.
+ - Run installed GDB in both cases.
+
+ Approved-By: Simon Marchi <simon.marchi@efficios.com>
+
+2022-11-15 Tom Tromey <tromey@adacore.com>
+
+ Fix crash in ada_print_type
+ The "varstring" paramter to ada_print_type can be null, but one spot
+ failed to check this. This could cause a crash in some situations.
+
+ As this is Ada-specific, and we've been using it internally at AdaCore
+ for a while, I am going to push it.
+
+2022-11-15 Tejas Joshi <TejasSanjay.Joshi@amd.com>
+
+ Add AMD znver4 processor support
+ 2022-09-28 Tejas Joshi <TejasSanjay.Joshi@amd.com>
+
+ gas/
+
+ * config/tc-i386.c (cpu_arch): Add znver4 ARCH and rmpquery SUBARCH.
+ (md_assemble): Expand comment before swap_operands() with rmpquery.
+ * doc/c-i386.texi: Add znver4.
+ * testsuite/gas/i386/arch-14-1.d: New.
+ * testsuite/gas/i386/arch-14-1.s: New.
+ * testsuite/gas/i386/arch-14-znver4.d: New.
+ * testsuite/gas/i386/i386.exp: Add new znver4 test cases.
+ * testsuite/gas/i386/rmpquery.d: New.
+ * testsuite/gas/i386/rmpquery.s: New.
+ * testsuite/gas/i386/x86-64-arch-4-1.d: New.
+ * testsuite/gas/i386/x86-64-arch-4-1.s: New.
+ * testsuite/gas/i386/x86-64-arch-4-znver4.d: New.
+
+ opcodes/
+
+ * i386-dis.c (x86_64_table): Add rmpquery.
+ * i386-gen.c (cpu_flag_init): Add CPU_ZNVER4_FLAGS and
+ CPU_RMPQUERY_FLAGS.
+ (cpu_flags): Add CpuRMPQUERY.
+ * i386-opc.h (enum): Add CpuRMPQUERY.
+ (i386_cpu_flags): Add cpurmpquery.
+ * i386-opc.tbl: Add rmpquery insn.
+ * i386-init.h: Re-generated.
+ * i386-tbl.h: Re-generated.
+
+2022-11-15 Simon Marchi <simon.marchi@polymtl.ca>
+
+ gdb/testsuite: get_set_option_choices: expect \r\n after each item
+ I get some random failures since commit 8d45c3a82a0e ("[gdb/testsuite]
+ Set completions to unlimited in get_set_option_choices"), which can be
+ reproduced with:
+
+ $ make check-read1 TESTS="gdb.base/parse_number.exp"
+
+ For instance:
+
+ set architecture A^M
+ Ambiguous item "A".^M
+ (gdb) FAIL: gdb.base/parse_number.exp: arch=A: set architecture A
+
+ The problem is the regexp in get_set_option_choices, it is possible that
+ is only matches part of a completion result. With check-read1, that is
+ always one letter.
+
+ Fix this by expecting the \r\n at the end of the line, so we only match
+ entire results. Use ^ in match patterns to ensure we don't miss any
+ output.
+
+ Approved-By: Tom de Vries <tdevries@suse.de>
+ Change-Id: Ib1733737feab7dde0f7095866e089081a891054e
+
+2022-11-15 Andre Vieira <andre.simoesdiasvieira@arm.com>
+
+ aarch64, testsuite: Fixed recently added cssc.d
+ Fixed wrong paste in cssc.d.
+
+ gas/ChangeLog:
+
+ * testsuite/gas/aarch64/cssc.d: Removed duplicate head.
+
+2022-11-15 Tom de Vries <tdevries@suse.de>
+
+ [gdb/testsuite] Normalize gdbserver path name
+ Currently for the target board remote-gdbserver-on-localhost we use the
+ gdbserver file on build, using a file name which includes "/../".
+
+ Fix this by using a normalized file name instead.
+
+ This allows us to be more restrictive about which files REMOTE_TARGET_USERNAME
+ can access:
+ ...
+ - remote_exec build "chmod go-rx $objdir/outputs"
+ + remote_exec build "chmod go-rx $objdir"
+ ...
+
+ Tested on x86_64-linux.
+
+2022-11-15 Tom de Vries <tdevries@suse.de>
+
+ [gdb/testsuite] Fix gdb.base/jit-elf-so.exp for remote target
+ With test-case gdb.base/jit-elf-so.exp and target board
+ remote-gdbserver-on-localhost (using REMOTE_TARGET_USERNAME) we run into some
+ failures.
+
+ Fix these by:
+ - setting jit_libname with the name as returned by gdb_load_shlib
+ - allowing the libraries to be prefixed with the remote target directory.
+
+ Tested on x86_64-linux.
+
+ Co-Authored-by: Ivan Tetyushkin <ivan.tetyushkin@syntacore.com>
+
+2022-11-15 Tom de Vries <tdevries@suse.de>
+
+ [gdb/testsuite] Fix gdb.base/jit-reader-exec.exp for remote target
+ With test-case gdb.base/jit-reader-exec.exp and target board
+ remote-gdbserver-on-localhost (using REMOTE_TARGET_USERNAME) we run into some
+ failures.
+
+ Fix this by adding the missing gdb_remote_download.
+
+ Tested on x86_64-linux.
+
+ Co-Authored-by: Ivan Tetyushkin <ivan.tetyushkin@syntacore.com>
+
+2022-11-15 Tom de Vries <tdevries@suse.de>
+
+ [gdb/testsuite] Fix gdb.base/info-shared.exp for remote target
+ With test-case gdb.base/info-shared.exp and target board
+ remote-gdbserver-on-localhost (using REMOTE_TARGET_USERNAME) we run into some
+ failures.
+
+ Fix these by adding the missing gdb_load_shlib.
+
+ Tested on x86_64-linux.
+
+ Co-Authored-by: Ivan Tetyushkin <ivan.tetyushkin@syntacore.com>
+
+2022-11-15 Tom de Vries <tdevries@suse.de>
+
+ [gdb/testsuite] Fix gdb.base/solib-vanish.exp for remote target
+ When running test-case gdb.base/solib-vanish.exp with target board
+ remote-gdbserver-on-localhost (using REMOTE_TARGET_USERNAME) we run into some
+ failures.
+
+ Fix these by adding the missing gdb_load_shlib.
+
+ Tested on x86_64-linux.
+
+ Co-Authored-by: Ivan Tetyushkin <ivan.tetyushkin@syntacore.com>
+
+2022-11-15 Tom de Vries <tdevries@suse.de>
+
+ [gdb/testsuite] Fix gdb.base/infcall-exec.exp for remote target
+ When running test-case gdb.base/infcall-exec.exp with target board
+ remote-gdbserver-on-localhost (using REMOTE_TARGET_USERNAME) we run into:
+ ...
+ (gdb) call (int) execlp ("$outputs/gdb.base/infcall-exec/infcall-exec2", \
+ "$outputs/gdb.base/infcall-exec/infcall-exec2", (char *)0)^M
+ $1 = -1^M
+ (gdb) FAIL: gdb.base/infcall-exec.exp: call execlp
+ ...
+
+ Fix this by using just:
+ ...
+ (gdb) call (int) execlp ("infcall-exec2", "infcall-exec2", (char *)0)^M
+ ...
+ and using putenv ("PATH=...") to allow infcall-exec to exec infcall-exec2
+ if it's available alongside.
+
+ Also fix the exec name in the test-case, such that we can successfully
+ run the test-case:
+ ...
+ $ ./outputs/gdb.base/infcall-exec/infcall-exec
+ PATH SETTING: 'PATH=./outputs/gdb.base/infcall-exec'
+ $
+ ...
+
+ Tested on x86_64-linux.
+
+ Co-Authored-by: Ivan Tetyushkin <ivan.tetyushkin@syntacore.com>
+
+2022-11-15 Tom de Vries <tdevries@suse.de>
+
+ [gdb/testsuite] Fix gdb.base/print-file-var.exp for remote target
+ When running test-case gdb.base/print-file-var.exp with target board
+ remote-gdbserver-on-localhost (using REMOTE_TARGET_USERNAME) we run into some
+ failures.
+
+ Fix these by using the name of a shared lib as returned by gdb_load_shlib.
+
+ This required splitting up the gdb_load_shlib functionality, which is now
+ defined as:
+ ...
+ proc gdb_load_shlib { file } {
+ set dest [gdb_download_shlib $file]
+ gdb_locate_shlib $file
+ return $dest
+ }
+ ...
+ such that we can do gdb_download_shlib before gdb is started.
+
+ Tested on x86_64-linux.
+
+ Co-Authored-by: Ivan Tetyushkin <ivan.tetyushkin@syntacore.com>
+
+2022-11-15 Tom de Vries <tdevries@suse.de>
+
+ [gdb/testsuite] Add REMOTE_TARGET_USERNAME in remote-gdbserver-on-localhost.exp
+ As reported here
+ ( https://sourceware.org/pipermail/gdb-patches/2022-October/193147.html ) a
+ number of test-cases fails with a remote target setup, for instance test-case
+ gdb.base/print-file-var.exp.
+
+ So, why don't we see these fails with our remote target boards in
+ gdb/testsuite/boards, say remote-gdbserver-on-localhost.exp?
+
+ The problem is that the target board uses the same machine and user for
+ both (by-definition-local) build and remote target, and when using absolute
+ pathnames to refer to files on build, we can access those files on target,
+ which in a real remote target setup wouldn't be the case: we'd have to
+ download them to target first, and then the filename would also be different.
+
+ For aforementioned test-case, this happens when the name of a shared library is
+ passed as absolute file name to gcc:
+ ...
+ gcc ... -DSHLIB_NAME="$outputs/gdb.base/print-file-var/\
+ print-file-var-lib2-hidden0-dlopen1-version_id_main0_c.so"
+ ...
+
+ Make these problems visible with remote-gdbserver-on-localhost.exp by
+ adding an option to specify a test account (still on the same machine)
+ using REMOTE_TARGET_USERNAME.
+
+ We make sure by restricting file permissions, that the test account cannot see
+ the build files on the $USER account, and that the $USER account cannot see
+ the target files on the test account.
+
+ And so we can reproduce the reported fails:
+ ...
+ $ cd build/gdb
+ $ tc="gdb.base/print-file-var.exp"
+ $ tb="--target_board remote-gdbserver-on-localhost"
+ $ tbu="REMOTE_TARGET_USERNAME=remote-target"
+ $ make check RUNTESTFLAGS="$tb $tbu $tc"
+ ...
+ FAIL: gdb.base/print-file-var.exp: lang=c: hidden=0: dlopen=1: \
+ version_id_main=0: continue to STOP marker
+ ...
+
+ Tested on x86_64-linux.
+
+ Reported-by: Ivan Tetyushkin <ivan.tetyushkin@syntacore.com>
+
+2022-11-15 Tom de Vries <tdevries@suse.de>
+
+ [gdb/testsuite] Fix gdb.base/info_sources_2.exp for remote target
+ With test-case gdb.base/info_sources_2.exp and target board
+ remote-gdbserver-on-localhost (using REMOTE_TARGET_USERNAME) we run into some
+ failures.
+
+ Fix these by adding the missing gdb_load_shlib.
+
+ Tested on x86_64-linux.
+
+2022-11-15 Tom de Vries <tdevries@suse.de>
+
+ [gdb/testsuite] Fix gdb.base/foll-exec.exp for remote target
+ When running test-case gdb.base/foll-exec.exp with target board
+ remote-gdbserver-on-localhost.exp, I run into:
+ ...
+ (gdb) PASS: gdb.base/foll-exec.exp: insert first exec catchpoint
+ continue^M
+ Continuing.^M
+ [Inferior 1 (process 4476) exited normally]^M
+ (gdb) FAIL: gdb.base/foll-exec.exp: continue to first exec catchpoint (the program e\
+ xited)
+ ...
+
+ The problem is that the foll-exec executable expects the exec-ed executable
+ execd-prog alongside it, but it's missing.
+
+ Fix this by adding the missing gdb_remote_download.
+
+ Likewise in a few other test-cases.
+
+ Tested on x86_64-linux.
+
+2022-11-15 Tom de Vries <tdevries@suse.de>
+
+ [gdb/testssuite] Skip aarch64 in skip_gdbserver_test if no xml support
+ On aarch64-linux, with a gdb build without libexpat, so without xml support, I
+ run into:
+ ...
+ (gdb) builtin_spawn attach-no-multi-process^M
+ attach 26808^M
+ Attaching to Remote target^M
+ warning: Can not parse XML target description; XML support was disabled at \
+ compile time^M
+ Reading symbols from attach-no-multi-process...^M
+ Remote 'g' packet reply is too long (expected 788 bytes, got 796 bytes): ... ^M
+ ...
+
+ The test-case checks for skip_gdbserver_tests and that one contains a check
+ for xml support:
+ ...
+ # If GDB is lack of XML support, and targets, like arm, have
+ # multiple target descriptions, GDB doesn't know which target
+ # description GDBserver uses, and may fail to parse 'g' packet
+ # after connection.
+ if { [gdb_skip_xml_test]
+ && ([istarget "arm*-*-linux*"]
+ || [istarget "mips*-*-linux*"]
+ || [istarget "powerpc*-*-linux*"]
+ || [istarget "s390*-*-linux*"]
+ || [istarget "x86_64-*-linux*"]
+ || [istarget "i\[34567\]86-*-linux*"]) } {
+ return 1
+ }
+ ...
+ but it doesn't trigger because aarch64 is missing.
+
+ Fix this by adding istarget "aarch64*-*-linux*".
+
+ Tested on aarch64-linux.
+
+ Approved-By: Luis Machado <luis.machado@arm.com>
+
+2022-11-15 Aditya Vidyadhar Kamath <Aditya.Kamath1@ibm.com>
+
+ Enable multi-process debugging for AIX
+ This patch adds multi-process debugging feature in AIX.
+
+ Till now AIX supported debugging only one inferior at a time,
+ now we can be able to debug multi process. Users can use set
+ follow fork mode in child or parent and set detach on fork on
+ or off to enable/disable simultaneous debugging of parent/child.
+
+2022-11-15 GDB Administrator <gdbadmin@sourceware.org>
+
+ Automatic date update in version.in
+
+2022-11-14 Carl Love <cel@us.ibm.com>
+
+ PowerPC, fix support for printing the function return value for non-trivial values.
+ Currently, a non-trivial return value from a function cannot currently be
+ reliably determined on PowerPC. This is due to the fact that the PowerPC
+ ABI uses register r3 to store the address of the buffer containing the
+ non-trivial return value when the function is called. The PowerPC ABI
+ does not guarantee the value in register r3 is not modified in the
+ function. Thus the value in r3 cannot be reliably used to obtain the
+ return addreses on exit from the function.
+
+ This patch adds a new gdbarch method to allow PowerPC to access the value
+ of r3 on entry to a function. On PowerPC, the new gdbarch method attempts
+ to use the DW_OP_entry_value for the DWARF entries, when exiting the
+ function, to determine the value of r3 on entry to the function. This
+ requires the use of the -fvar-tracking compiler option to compile the
+ user application thus generating the DW_OP_entry_value in the binary. The
+ DW_OP_entry_value entries in the binary file allows GDB to resolve the
+ DW_TAG_call_site entries. This new gdbarch method is used to get the
+ return buffer address, in the case of a function returning a nontrivial
+ data type, on exit from the function. The GDB function should_stop checks
+ to see if RETURN_BUF is non-zero. By default, RETURN_BUF will be set to
+ zero by the new gdbarch method call for all architectures except PowerPC.
+ The get_return_value function will be used to obtain the return value on
+ all other architectures as is currently being done if RETURN_BUF is zero.
+ On PowerPC, the new gdbarch method will return a nonzero address in
+ RETURN_BUF if the value can be determined. The value_at function uses the
+ return buffer address to get the return value.
+
+ This patch fixes five testcase failures in gdb.cp/non-trivial-retval.exp.
+ The correct function return values are now reported.
+
+ Note this patch is dependent on patch: "PowerPC, function
+ ppc64_sysv_abi_return_value add missing return value convention".
+
+ This patch has been tested on Power 10 and x86-64 with no regressions.
+
+2022-11-14 Carl Love <cel@us.ibm.com>
+
+ PowerPC, function ppc64_sysv_abi_return_value add missing return value convention
+ This patch address five testcase failures in gdb.cp/non-trivial-retval.exp.
+ The following commit resulted in the five testcases failures on PowerPC.
+ The value returned by the function is being reported incorrectly.
+
+ commit b1718fcdd1d2a5c514f8ee504ba07fb3f42b8608
+ Author: Andrew Burgess <aburgess@redhat.com>
+ Date: Mon Dec 13 16:56:16 2021 +0000
+
+ gdb: on x86-64 non-trivial C++ objects are returned in memory
+
+ Fixes PR gdb/28681. It was observed that after using the `finish`
+ command an incorrect value was displayed in some cases. Specifically,
+ this behaviour was observed on an x86-64 target.
+
+ The function:
+
+ enum return_value_convention
+ ppc64_sysv_abi_return_value (struct gdbarch *gdbarch, struct value *function,
+ struct type *valtype, struct regcache *regcache,
+ gdb_byte *readbuf, const gdb_byte *writebuf)
+
+ should return RETURN_VALUE_STRUCT_CONVENTION if the valtype->code() is
+ TYPE_CODE_STRUCT and if the language_pass_by_reference is not
+ trivially_copyable.
+
+ This patch adds the needed code to return the value
+ RETURN_VALUE_STRUCT_CONVENTION in this case.
+
+ With this patch, the five test cases still fail but with the message "Value
+ returned has type: A. Cannot determine contents". The PowerPC ABI stores
+ the address of the buffer containing the function return value in register
+ r3 on entry to the function. However, the PowerPC ABI does not guarentee
+ that r3 will not be modified in the function. So when the function returns,
+ the return buffer address cannot be reliably obtained from register r3.
+ Thus the message "Cannot determine contents" is appropriate in this case.
+
+2022-11-14 Tom Tromey <tromey@adacore.com>
+
+ Remove dump_prefix_expression
+ Since the expression rewrite, dump_prefix_expression has been
+ misnamed. This patch cleans this up by removing the function, turning
+ it into a method on struct expression.
+
+2022-11-14 Andre Vieira <andre.simoesdiasvieira@arm.com>
+
+ aarch64: Add support for Common Short Sequence Compression extension
+ This patch adds support for the CSSC extension and its corresponding
+ instructions: ABS, CNT, CTZ, SMAX, UMAX, SMIN, UMIN.
+
+ gas/ChangeLog:
+
+ * config/tc-aarch64.c (parse_operands): Handle new operand types.
+ * doc/c-aarch64.texi: Document new extension.
+ * testsuite/gas/aarch64/cssc.d: New test.
+ * testsuite/gas/aarch64/cssc.s: New test.
+
+ include/ChangeLog:
+
+ * opcode/aarch64.h (AARCH64_FEATURE_CSSC): New feature Macro.
+ (enum aarch64_opnd): New operand types.
+ (enum aarch64_insn_class): New instruction class.
+
+ opcodes/ChangeLog:
+
+ * aarch64-asm-2.c: Regenerate.
+ * aarch64-dis-2.c: Regenerate.
+ * aarch64-opc-2.c: Regenerate.
+ * aarch64-opc.c (operand_general_constraint_met_p): Update for new
+ operand types.
+ (aarch64_print_operand): Likewise.
+ * aarch64-opc.h (enum aarch64_field_kind): Declare FLD_CSSC_imm8 field.
+ * aarch64-tbl.h (aarch64_feature_cssc): Define new feature set.
+ (CSSC): Define new feature set Macro.
+ (CSSC_INSN): Define new instruction type.
+ (aarch64_opcode_table): Add new instructions.
+
+2022-11-14 Jan Beulich <jbeulich@suse.com>
+
+ x86: fold special-operand insn attributes into a single enum
+ Attributes which aren't used together in any single insn template can be
+ converted from individual booleans to a single enum, as was done for a few
+ other attributes before. This is more space efficient. Collect together
+ all attributes which express special operand constraints (and which fit
+ the criteria for folding).
+
+2022-11-14 Dimitar Dimitrov <dimitar@dinux.eu>
+
+ pru: bfd: Correct default to no execstack
+ Data and instruction memories are strictly separated, so it is not
+ possible to execute instructions from the stack memory on PRU.
+
+ I don't see any difference in testsuite results with or without this
+ change.
+
+ bfd/ChangeLog:
+
+ * elf32-pru.c (elf_backend_default_execstack): Define as 0.
+
+ ld/ChangeLog:
+
+ * testsuite/ld-elf/elf.exp (target_defaults_to_execstack):
+ Return 0 for pru.
+
+2022-11-14 Srinath Parvathaneni <srinath.parvathaneni@arm.com>
+
+ [gas] arm: Add support for new unwinder directive ".pacspval".
+ This patch adds the assembler support for the new unwinder
+ directive ".pacspval" and encodes this directives with opcode
+ "0xb5". This opcode indicates the unwinder to use effective
+ vsp as modifier for PAC validation.
+
+ gas/ChangeLog:
+
+ 2022-11-07 Srinath Parvathaneni <srinath.parvathaneni@arm.com>
+
+ * doc/c-arm.texi: Document directive.
+ * config/tc-arm.c (s_arm_unwind_pacspval): Define function.
+ (md_pseudo_table): Add entry for pacspval directive.
+ * testsuite/gas/arm/ehabi-pacbti-m.d: New test.
+ * testsuite/gas/arm/ehabi-pacbti-m.s: Likewise.
+
+2022-11-14 Srinath Parvathaneni <srinath.parvathaneni@arm.com>
+
+ [readelf] arm: Support for new pacbti unwind opcode 0xb5.
+ This patch adds readelf support for decoding the exception
+ table opcode "0xb5", which indicates to use effective vsp
+ as modifier for PAC validation as defined by EHABI
+ (https://github.com/ARM-software/abi-aa/releases/download/2022Q3/ehabi32.pdf
+ Section 10.3).
+
+ binutils/ChangeLog:
+
+ 2022-11-07 Srinath Parvathaneni <srinath.parvathaneni@arm.com>
+
+ * readelf.c (decode_arm_unwind_bytecode): Add entry to decode opcode 0xb5.
+
+2022-11-14 Tsukasa OI <research_trasio@irq.a4lg.com>
+
+ gdb/unittests: PR28413, suppress warnings generated by Gnulib
+ Gnulib generates a warning if the system version of certain functions
+ are used (to redirect the developer to use Gnulib version). It caused a
+ compiler error when...
+
+ - Compiled with Clang
+ - -Werror is specified (by default)
+ - C++ standard used by Clang is before C++17 (by default as of 15.0.0)
+ when this unit test is activated.
+
+ This issue is raised as PR28413.
+
+ However, previous proposal to fix this issue (a "fix" to Gnulib):
+ <https://lists.gnu.org/archive/html/bug-gnulib/2021-10/msg00003.html>
+ was rejected because it ruins the intent of Gnulib warnings.
+
+ So, we need a Binutils/GDB-side solution.
+
+ This commit tries to address this issue on the GDB side. We have
+ "include/diagnostics.h" to disable certain warnings only when necessary.
+
+ This commit suppresses the Gnulib warnings by surrounding entire #include
+ block with DIAGNOSTIC_IGNORE_USER_DEFINED_WARNINGS to disable Gnulib-
+ generated warnings on all standard C++ header files.
+
+ Bug: https://sourceware.org/bugzilla/show_bug.cgi?id=28413
+ Approved-By: Simon Marchi <simon.marchi@efficios.com>
+ Change-Id: Ieeb5a31a6902808d4c7263a2868ae19a35e0ccaa
+
+2022-11-14 Srinath Parvathaneni <srinath.parvathaneni@arm.com>
+
+ arm: Add support for Cortex-X1C CPU.
+ This patch adds support for Cortex-X1C CPU in Arm.
+
+ bfd/ChangeLog:
+
+ 2022-11-09 Srinath Parvathaneni <srinath.parvathaneni@arm.com>
+
+ * cpu-arm.c (processors): Add Cortex-X1C CPU entry.
+
+ gas/ChangeLog:
+
+ 2022-11-09 Srinath Parvathaneni <srinath.parvathaneni@arm.com>
+
+ * NEWS: Update docs.
+ * config/tc-arm.c (arm_cpus): Add cortex-x1c to -mcpu.
+ * doc/c-arm.texi: Update docs.
+ * testsuite/gas/arm/cpu-cortex-x1c.d: New test.
+
+2022-11-14 Tom de Vries <tdevries@suse.de>
+
+ [gdb/testsuite] Run gdb.arch/ppc64-symtab-cordic.exp for --enable-targets=all
+ While looking at test-case gdb.arch/ppc64-symtab-cordic.exp I realized that
+ the test-case is too restrictive here:
+ ...
+ if {![istarget "powerpc*"] || ![is_lp64_target]} {
+ verbose "Skipping powerpc64 separate debug file symtab test."
+ return
+ }
+ ...
+ and can also be run on x86_64-linux, if "set arch powerpc:common64" is
+ supported, which is the case if we've build gdb with --enable-targets=all.
+
+ Fix this by instead checking if powerpc:common64 is in the completion list for
+ "set arch".
+
+ This allows us to remove the 'untested "powerpc:common64 is not supported"'.
+
+ While we're at it, clean up the test-case by using clean_restart.
+
+ Tested on x86_64-linux.
+
+2022-11-14 Tom de Vries <tdevries@suse.de>
+
+ [gdb/testsuite] Handle with_set arch
+ I realized that the more irregular output of show arch:
+ ...
+ (gdb) show arch^M
+ The target architecture is set to "auto" (currently "i386").^M
+ ...
+ would be a problem for something like:
+ ...
+ with_set arch powerpc:common64 {}
+ ...
+ and indeed:
+ ...
+ (gdb) set arch powerpc:common64^M
+ The target architecture is set to "powerpc:common64".^M
+ (gdb) FAIL: gdb.base/foo.exp: set arch powerpc:common64
+ ...
+ and:
+ ...
+ (gdb) set arch set to "auto" (currently "i386")^M
+ Undefined item: "set".^M
+ ...
+
+ Fix this in with_set by handling this type of output.
+
+ Tested on x86_64-linux.
+
+2022-11-14 Tom de Vries <tdevries@suse.de>
+
+ [gdb/testsuite] Set completions to unlimited in get_set_option_choices
+ In some test-case I tried to use get_set_option_choices "set architecture" and
+ ran into max-completions:
+ ...
+ set architecture simple^M
+ set architecture tomcat^M
+ set architecture xscale^M
+ set architecture *** List may be truncated, max-completions reached. ***^M
+ (gdb) PASS: gdb.base/foo.exp: complete set architecture
+ ...
+
+ There's only one test-case using this currently: gdb.base/parse_number.exp,
+ and it locally sets max-completions to unlimited.
+
+ Fix this by:
+ - factoring out a new proc with_set out of proc with_complaints, and
+ - using it to temporarily set max-completions to unlimited in
+ get_set_option_choice.
+
+ Tested on x86_64-linux, by running test-cases that excercise
+ get_set_option_choice and with_complaints.
+
+2022-11-14 Alan Modra <amodra@gmail.com>
+
+ Re: objcopy renaming section with explicit flags
+ For now, xfail the new test. Some header/aux-header rewriting is
+ required at the very least.
+
+ * testsuite/binutils-all/rename-section-01.d: xfail xcoff.
+
+2022-11-14 Alan Modra <amodra@gmail.com>
+
+ objcopy renaming section with explicit flags
+ This tidies SEC_RELOC handling in bfd, in the process fixing a bug
+ with objcopy when renaming sections.
+
+ bfd/
+ * reloc.c (_bfd_generic_set_reloc): Set/clear SEC_RELOC depending
+ on reloc count.
+ * elf64-sparc.c (elf64_sparc_set_reloc): Likewise.
+ binutils/
+ * objcopy.c (copy_relocations_in_section): Remove now unnecessary
+ clearing of SEC_RELOC.
+ * testsuite/binutils-all/rename-section-01.d: New test.
+ * testsuite/binutils-all/objcopy.exp: Run it.
+ gas/
+ * write.c (size_seg): Remove unneccesary twiddle of SEC_RELOC.
+ (write_relocs): Likewise. Always call bfd_set_reloc.
+
+2022-11-14 GDB Administrator <gdbadmin@sourceware.org>
+
+ Automatic date update in version.in
+
+2022-11-13 Jon Turney <jon.turney@dronecode.org.uk>
+
+ Fix Cygwin build after 02d04eac
+ Commit 02d04eac "Use strwinerror in gdb/windows-nat.c" also moves
+ strwinerror() under the USE_WIN32API conditional, which is not defined
+ for Cygwin (and looks like it shouldn't be, as appears to imply
+ non-POSIX and MiNGW and WinSock...)
+
+ Also enable the declaration and definition of strwinerror() when
+ __CYGWIN__ is defined.
+
+2022-11-13 Jon Turney <jon.turney@dronecode.org.uk>
+
+ Drop apparently unneeded include of winsock2.h
+ Commit d08bae3d ("Implement target async for Windows") unconditionally
+ includes winsock2.h. We don't want to do that on Cygwin, since
+ including both winsock2.h and sys/select.h causes incompatible
+ redefinition problems.
+
+ Since that include is apparently unneeded, just drop it.
+
+ Fixes: d08bae3d
+
+2022-11-13 GDB Administrator <gdbadmin@sourceware.org>
+
+ Automatic date update in version.in
+
+2022-11-12 Dimitar Dimitrov <dimitar@dinux.eu>
+
+ sim: pru: Fix behaviour when loop count is zero
+ If the counter for LOOP instruction is provided by a register with
+ value zero, then the instruction must cause a PC jump directly to the
+ loop end. But in that particular case simulator must not initialize
+ its internal loop variables, because loop body will not be executed.
+ Instead, simulator must obtain the loop's end address directly from
+ the LOOP instruction.
+
+2022-11-12 Alan Modra <amodra@gmail.com>
+
+ PowerPC64 paddi -Mraw
+ On a testcase like
+ pla 8,foo@pcrel
+ disassembled with -Mpower10 results in
+ 0: 00 00 10 06 pla r8,0 # 0
+ 4: 00 00 00 39
+ 0: R_PPC64_PCREL34 foo
+ but with -Mpower10 -Mraw
+ 0: 00 00 10 06 .long 0x6100000
+ 0: R_PPC64_PCREL34 foo
+ 4: 00 00 00 39 addi r8,0,0
+
+ The instruction is unrecognised due to the hack we have in
+ extract_pcrel0 in order to disassemble paddi with RA0=0 and R=1 as
+ pla. I could have just added "&& !(dialect & PPC_OPCODE_RAW)" to the
+ condition in extract_pcrel0 under which *invalid is set, but went for
+ this larger patch that reorders the extended insn pla to the more
+ usual place before its underlying machine insn. (la is after addi
+ because we never disassemble to la.)
+
+ gas/
+ * testsuite/gas/ppc/raw.d,
+ * testsuite/gas/ppc/raw.s: Add pla.
+ opcodes/
+ * ppc-opc.c (extract_pcrel1): Rename from extract_pcrel0 and
+ invert *invalid logic.
+ (PCREL1): Rename from PCREL0.
+ (prefix_opcodes): Sort pla before paddi, adjusting R operand
+ for pla, paddi and psubi.
+
+2022-11-12 Indu Bhagat <indu.bhagat@oracle.com>
+
+ libctf: use libtool for link test in configure
+ The configure check for ELF support in BFD uses the AC_TRY_LINK. If
+ libbfd's dependencies change, this macro will need to be updated
+ manually with explicit additions to LDFLAGS and LIBS.
+
+ This patch updates the check to use libtool instead.
+
+ ChangeLog:
+
+ * libctf/configure.ac: Use libtool instead.
+ * libctf/configure: Regenerated.
+
+2022-11-12 GDB Administrator <gdbadmin@sourceware.org>
+
+ Automatic date update in version.in
+
+2022-11-11 Simon Marchi <simon.marchi@polymtl.ca>
+
+ gdb: fix start breakpoint expression not working in some languages
+ Commit 0be837be9fb4 ("gdb: make "start" breakpoint inferior-specific")
+ regresses gdb.ada/start.exp:
+
+ (gdb) start
+ Error in expression, near `1'.
+ (gdb) UNTESTED: gdb.ada/start.exp: start failed to land inside the right procedure
+
+ This is because in Ada, the equality operator is =, not ==.
+
+ I checked the other languages supported by GDB, these other languages
+ use = for equality:
+
+ - Pascal: tests like gdb.pascal/hello.exp are affected too
+ - Modula-2: I tried building a Modula-2 hello world using gm2, but it
+ seems like the generated DWARF doesn't specify the Modula-2 language
+ in the CUs, it's C++ and C, so the selected language isn't
+ "modula-2". But if I manually do "set language modula-2" on a dummy
+ program and then "start", I get the same error.
+
+ Other languages all use ==.
+
+ So, a short term fix would be to use = or == in the expression, based on
+ the current language. If this was meant to be permanent, I would
+ suggest adding something like an "equality_operator" method to
+ language_defn, that returns the right equality operator for the
+ language. But the goal is to replace all this with proper
+ inferior-specific breakpoints, so I hope all this is temporary.
+
+ Approved-By: Tom de Vries <tdevries@suse.de>
+ Change-Id: Id4d38e14a80e6bbbb1ad2b2277f974dd55192969
+
+2022-11-11 Mike Frysinger <vapier@gentoo.org>
+
+ sim: igen: cleanup archaic pointer-to-long printf casts
+ Use proper %p to printf a pointer instead of casting it to long and
+ using 0x%lx. It's cleaner, more correct, and doesn't break on LLP64.
+
+2022-11-11 Tom de Vries <tdevries@suse.de>
+
+ [gdb/testsuite] Don't timeout on prompt in gdb_start_cmd
+ We're currently running into a timeout at:
+ ...
+ (gdb) start ^M
+ Error in expression, near `1'.^M
+ (gdb) UNTESTED: gdb.ada/start.exp: start failed to land inside the right \
+ procedure
+ ...
+ due to the fact that gdb_start_cmd doesn't handle a prompt as reaction to
+ the start command.
+
+ Fix this by handling the prompt. Reduces execution time of the test-case from
+ 1m1s to 1s.
+
+ Tested on x86_64-linux.
+
+2022-11-11 Tom de Vries <tdevries@suse.de>
+
+ [gdb/testsuite] Better error checking in has_hw_wp_support
+ With gdb 12.1, on powerpc64le I ran into ERRORs related to has_hw_wp_support
+ usage, which was already fixed on trunk by commits:
+ - 13f72372413 ("gdb/testsuite: fix gdb.base/break-idempotent.exp on ppc"), and
+ - 01a32ee0b8c ("PowerPC, fix gdb.base/watchpoint.exp on Power 9")
+
+ While looking into these ERRORs and the commits that fix them, it occurred to
+ me that while the commits fix the root cause, the failure mode is not great.
+
+ The test-cases expect a running instance of gdb upon return, which is not
+ there, so there's an long stream of ERRORs generated as a result.
+
+ Fix this at the start of has_hw_wp_support, by (instead of accomodating a
+ running gdb instance by calling gdb_exit), checking whether it's called
+ without a running gdb instance, and erroring out otherwise. This way, there's
+ just one error.
+
+ I also noticed that in case we do an early exit due to !runto_main, we don't
+ clean up, so copy the missing cleanups (gdb_exit and $obj file deletion) from
+ the regular exit.
+
+ Tested on x86_64-linux, using has_hw_wp_support for x86_64 in
+ skip_hw_watchpoint_tests.
+
+2022-11-11 Lancelot SIX <lancelot.six@amd.com>
+
+ gdb/py-inferior: Keep inferior threads in a map
+ The python code maintains a list of threads for each inferior. This
+ list is implemented as a linked list. When the number of threads grows
+ high, this implementation can begin to be a performance bottleneck as
+ finding a particular thread_object in the list has a complexity of O(N).
+
+ We see this in ROCgdb[1], a downstream port of GDB for AMDGUP. On
+ AMDGPU devices, the number of threads can get significantly higher than
+ on usual GDB workloads.
+
+ In some situations, we can reach the end of the inferior process with
+ GDB still having a substantial list of known threads. While running
+ target_mourn_inferior, we end up in inferior::clear_thread_list which
+ iterates over all remaining threads and marks each thread exited. This
+ fires the gdb::observers::thread_exit observer and eventually
+ py-inferior.c:set_thread_exited gets called. This function searches in
+ the linked list with poor performances.
+
+ This patch proposes to change the linked list that keeps the per
+ inferior_object list of thread_objects into a std::unordered_map. This
+ allows to have the search operation complexity be O(1) on average
+ instead of O(N).
+
+ With this patch, we can complete clear_thread_list in about 2.5 seconds
+ compared to 10 minutes without it.
+
+ Except for the performance change, no user visible change is expected.
+
+ Regression tested on Ubuntu-22.04 x86_64.
+
+ [1] https://github.com/ROCm-Developer-Tools/ROCgdb
+
+2022-11-11 Luis Machado <luis.machado@arm.com>
+
+ Make sure a copy_insn_closure is available when we have a match in copy_insn_closure_by_addr
+ PR gdb/29272
+
+ Investigating PR29272, it was mentioned a particular test used to work on
+ GDB 10, but it started failing with GDB 11 onwards. I tracked it down to
+ some displaced stepping improvements on commit
+ 187b041e2514827b9d86190ed2471c4c7a352874.
+
+ In particular, one of the corner cases using copy_insn_closure_by_addr got
+ silently broken. It is hard to spot because it doesn't have any good tests
+ for it, and the situation is quite specific to the Arm target.
+
+ Essentially, the change from the displaced stepping improvements made it so
+ we could still invoke copy_insn_closure_by_addr correctly to return the
+ pointer to a copy_insn_closure, but it always returned nullptr due to
+ the order of the statements in displaced_step_buffer::prepare.
+
+ The way it is now, we first write the address of the displaced step buffer
+ to PC and then save the copy_insn_closure pointer.
+
+ The problem is that writing to PC for the Arm target requires figuring
+ out if the new PC is thumb mode or not.
+
+ With no copy_insn_closure data, the logic to determine the thumb mode
+ during displaced stepping doesn't work, and gives random results that
+ are difficult to track (SIGILL, SIGSEGV etc).
+
+ Fix this by reordering the PC write in displaced_step_buffer::prepare
+ and, for safety, add an assertion to
+ displaced_step_buffer::copy_insn_closure_by_addr so GDB stops right
+ when it sees this invalid situation. If this gets broken again in the
+ future, it will be easier to spot.
+
+ Bug: https://sourceware.org/bugzilla/show_bug.cgi?id=29272
+
+ Approved-By: Simon Marchi <simon.marchi@efficios.com>
+
+2022-11-11 Felix Willgerodt <felix.willgerodt@intel.com>
+
+ gdb, btrace: Fix rn-dl-bind.exp for new icx remark.
+ When running the test with the latest Intel compiler:
+
+ Running gdb/gdb/testsuite/gdb.btrace/rn-dl-bind.exp ...
+ gdb compile failed, icpx: warning: treating 'c' input as 'c++' when
+ in C++ mode, this behavior is deprecated [-Wdeprecated]
+
+ The test doesn't seem to test something specifically for C++,
+ so I removed the C++ compilation option. Alternatively we could rename
+ rn-dl-bind.exp.c to rn-dl-bind.exp.cc.
+
+2022-11-11 Bruno Larsen <blarsen@redhat.com>
+
+ gdb/testsuite: disable gdb.cp/call-method-register.exp when not using gcc
+ The test gdb.cp/call-method-register.exp assumes that the class will be
+ placed on a register. However, this keyword has been deprecated since
+ C++11, and Clang, for instance, does not feel the need to follow it.
+ Since this test is not usable without this working, this commit marks
+ this test as untested.
+
+ Approved-by: Tom Tromey <tom@tromey.com>
+
+2022-11-11 Bruno Larsen <blarsen@redhat.com>
+
+ gdb/testsuite: remove XFAIL on gdb.cp/temargs.exp
+ gdb.cp/temargs.exp last 2 tests always setup an XFAILs, despite checking
+ for old gcc versions. However, Clang does not fail in this test,
+ turning into XPASSes and slighty annoying when comparing between
+ compilers. To change this, make the xfails only happen if we using gcc.
+
+ Approved-by: Tom Tromey <tom@tromey.com>
+
+2022-11-11 Bruno Larsen <blarsen@redhat.com>
+
+ gdb/testsuite: disable some tests of gdb.cp/typeid.exp when using Clang
+ Since Clang chooses to not add any debug information for base types,
+ expecting it to be included with libraries' informations, gdb.cp/typeid.exp
+ will always fail if the program hasn't started. This commit fixes that by
+ making it so when using Clang, the base type variables aren't tested.
+
+ Approved-by: Tom Tromey <tom@tromey.com>
+
+2022-11-11 Bruno Larsen <blarsen@redhat.com>
+
+ gdb/testsuite: skip gdb.cp/anon-struct.exp when using Clang
+ When Clang compiles anonymous structures, it does not add linkage names in
+ their dwarf representations. This is compounded by Clang not adding linkage
+ names to subprograms of those anonymous structs (for instance, the
+ constructor). With these 2 things together, GDB is unable to refer to
+ any of them, so there is no way to pass any of the tests of
+ gdb.cp/anon-struct.exp
+
+ Since this isn't a bug on Clang or GDB according to the DWARF
+ specifications as DW_AT_name is optional for all DIEs, the test was marked
+ as untested.
+
+ Since I was already touching the file, I also added a comment at the top
+ of the file explaining what it is testing for.
+
+ Approved-by: Tom Tromey <tom@tromey.com>
+
+2022-11-11 Bruno Larsen <blarsen@redhat.com>
+
+ gdb/testsuite: allow for Clang style destructors on gdb.cp/m-static.exp
+ when running gdb.cp/m-static.exp using Clang, we get the following
+ failures:
+
+ print test1.~gnu_obj_1^M
+ $6 = {void (gnu_obj_1 * const)} 0x555555555470 <gnu_obj_1::~gnu_obj_1()>^M
+ (gdb) FAIL: gdb.cp/m-static.exp: simple object instance, print destructor
+ ptype test1.~gnu_obj_1^M
+ type = void (gnu_obj_1 * const)^M
+ (gdb) FAIL: gdb.cp/m-static.exp: simple object instance, ptype destructor
+ print test1.'~gnu_obj_1'^M
+ $7 = {void (gnu_obj_1 * const)} 0x555555555470 <gnu_obj_1::~gnu_obj_1()>^M
+ (gdb) FAIL: gdb.cp/m-static.exp: simple object instance, print quoted destructor
+
+ This is because the test is expecting an extra integer parameter on the
+ destructor. Looking at the debuginfo, it seems that there is nothing
+ actually wrong with this output, so these tests were changed to test
+ multiple possible regexps.
+
+ Approved-by: Tom Tromey <tom@tromey.com>
+
+2022-11-11 Bruno Larsen <blarsen@redhat.com>
+
+ gdb/testsuite: add XFAIL to gdb.cp/derivation.exp when using Clang
+ When running gdb.cp/derivation.exp using Clang, we get an unexpected
+ failure when printing the type of a class with an internal typedef. This
+ happens because Clang doesn't add accessibility information for typedefs
+ inside classes (see https://github.com/llvm/llvm-project/issues/57608
+ for more info). To help with Clang testing, an XFAIL was added to this
+ test.
+
+ Approved-by: Tom Tromey <tom@tromey.com>
+
+2022-11-11 Bruno Larsen <blarsen@redhat.com>
+
+ gdb/testsuite: account for clang's nested destructor calls on gdb.cp/mb-ctor.exp
+ When compiling virtual classes's destructors, two versions are compiled,
+ one with a single parameter (this) and the other with 2 parameters (this
+ and vtt).
+
+ GCC's compilation makes it so either the version with 1
+ parameter or the one with 2 parameters is called, depending on whether
+ the destructor is being called by the class itself or by an inherited
+ class. On the test gdb.cp/mb-ctor.exp, this means that the breakpoint
+ set at the destructor will be hit 4 times.
+
+ Clang, on the other hand, makes the single-parameter version call the 2
+ parameter version, probably in an attempt to reduce the size of the
+ resulting executable. This means that the gdb.cp/mb-ctor.exp will hit 6
+ breakpoints before finishing, and is the reason why this test was
+ failing. To make this test stop failing, a compiler check is added and
+ another "continue" instruction is issued to account for this difference.
+
+ Approved-by: Tom Tromey <tom@tromey.com>
+
+2022-11-11 Bruno Larsen <blarsen@redhat.com>
+
+ gdb/testsuite: enable running gdb.cp/classes.exp with clang
+ When attempting to run the gdb.cp/classes.exp test using Clang++, the
+ test fails to prepare with -Wnon-c-typedef-for-linkage like the
+ previously fixed gdb.cp/class2.exp. Upon fixing this, the test shows 5
+ unexpected failures. One such failures is:
+
+ ptype/r class class_with_public_typedef
+ type = class class_with_public_typedef {
+ private:
+ int a;
+ public:
+ class_with_public_typedef::INT b;
+
+ private:
+ typedef int INT;
+ }
+ (gdb) FAIL: gdb.cp/classes.exp: ptype class class_with_public_typedef // wrong access specifier for typedef: private
+
+ While g++ provided the following output:
+
+ ptype/r class class_with_public_typedef
+ type = class class_with_public_typedef {
+ private:
+ int a;
+ public:
+ class_with_public_typedef::INT b;
+
+ typedef int INT;
+ }
+ (gdb) PASS: gdb.cp/classes.exp: ptype class class_with_public_typedef
+
+ This error happens because Clang does not add DW_AT_accessibility to
+ typedefs inside classes, and without this information GDB defaults to
+ assuming the typedef is private. Since there is nothing that GDB can do
+ about this, these tests have been set as xfails, and Clang bug 57608 has
+ been filed.
+
+ Bug: https://github.com/llvm/llvm-project/issues/57608
+ Approved-by: Tom Tromey <tom@tromey.com>
+
+2022-11-11 Bruno Larsen <blarsen@redhat.com>
+
+ gdb/testsuite: ignore Non-C-typedefs for gdb.cp/class2.exp
+ When attempting to test gdb.cp/class2.exp using Clang, it fails to
+ prepare with the following error:
+
+ Executing on host: clang++ -fdiagnostics-color=never -Wno-unknown-warning-option -c -g -o /home/blarsen/Documents/fsf_build/gdb/testsuite/outputs/gdb.cp/class2/class20.o /home/blarsen/Documents/fsf_build/gdb/testsuite/../../../binutils-gdb/gdb/testsuite/gdb.cp/class2.cc (timeout = 300)
+ builtin_spawn -ignore SIGHUP clang++ -fdiagnostics-color=never -Wno-unknown-warning-option -c -g -o /home/blarsen/Documents/fsf_build/gdb/testsuite/outputs/gdb.cp/class2/class20.o /home/blarsen/Documents/fsf_build/gdb/testsuite/../../../binutils-gdb/gdb/testsuite/gdb.cp/class2.cc
+ /home/blarsen/Documents/fsf_build/gdb/testsuite/../../../binutils-gdb/gdb/testsuite/gdb.cp/class2.cc:53:14: warning: anonymous non-C-compatible type given name for linkage purposes by typedef declaration; add a tag name here [-Wnon-c-typedef-for-linkage]
+ typedef class {
+ ^
+ Dbase
+ /home/blarsen/Documents/fsf_build/gdb/testsuite/../../../binutils-gdb/gdb/testsuite/gdb.cp/class2.cc:54:2: note: type is not C-compatible due to this member declaration
+ public:
+ ^~~~~~~
+ /home/blarsen/Documents/fsf_build/gdb/testsuite/../../../binutils-gdb/gdb/testsuite/gdb.cp/class2.cc:58:3: note: type is given name 'Dbase' for linkage purposes by this typedef declaration
+ } Dbase;
+ ^
+ 1 warning generated.
+ gdb compile failed, /home/blarsen/Documents/fsf_build/gdb/testsuite/../../../binutils-gdb/gdb/testsuite/gdb.cp/class2.cc:53:14: warning: anonymous non-C-compatible type given name for linkage purposes by typedef declaration; add a tag name here [-Wnon-c-typedef-for-linkage]
+ typedef class {
+ ^
+ Dbase
+ /home/blarsen/Documents/fsf_build/gdb/testsuite/../../../binutils-gdb/gdb/testsuite/gdb.cp/class2.cc:54:2: note: type is not C-compatible due to this member declaration
+ public:
+ ^~~~~~~
+ /home/blarsen/Documents/fsf_build/gdb/testsuite/../../../binutils-gdb/gdb/testsuite/gdb.cp/class2.cc:58:3: note: type is given name 'Dbase' for linkage purposes by this typedef declaration
+ } Dbase;
+ ^
+ 1 warning generated.
+ UNTESTED: gdb.cp/class2.exp: failed to prepare
+
+ This can be silenced by adding -Wno-non-c-typedef-for-linkage for Clang
+ 11 or later. The test shows no failures with this change.
+
+ Approved-by: Tom Tromey <tom@tromey.com>
+
+2022-11-11 Jan Beulich <jbeulich@suse.com>
+
+ gas: accept custom ".linefile <n> ."
+ While .linefile is generally intended for gas internal use only, its use
+ in a source file would better not result in an internal error. Give use
+ of it outside of any macro(-like) construct the meaning of restoring the
+ original (physical) input file name.
+
+ x86: drop stray IsString from PadLock insns
+ The need for IsString on the PadLock insns went away with the
+ introduction of RepPrefixOk. Drop these leftovers.
+
+ x86: drop duplicate sse4a entry from cpu_arch[]
+ Of the two instances the first is correct in using ANY_SSE4A as 3rd
+ argument to SUBARCH(), so drop the wrong/redundant/dead 2nd one.
+
+2022-11-11 Alan Modra <amodra@gmail.com>
+
+ PR28834, PR26946 sanity checking section size
+ This patch provides a new function to sanity check section sizes.
+ It's mostly extracted from what we had in bfd_get_full_section_contents
+ but also handles compressed debug sections.
+ Improvements are:
+ - section file offset is taken into account,
+ - added checks that a compressed section can be read from file.
+
+ The function is then used when handling multiple .debug_* sections
+ that need to be read into a single buffer, to sanity check sizes
+ before allocating the buffer.
+
+ PR 26946, PR 28834
+ * Makefile.am (LIBBFD_H_FILES): Add section.c.
+ * compress.c (bfd_get_full_section_contents): Move section size
+ sanity checks..
+ * section.c (_bfd_section_size_insane): ..to here. New function.
+ * dwarf2.c (read_section): Use _bfd_section_size_insane.
+ (_bfd_dwarf2_slurp_debug_info): Likewise.
+ * Makefile.in: Regenerate.
+ * libbfd.h: Regenerate.
+
+2022-11-11 Alan Modra <amodra@gmail.com>
+
+ Sanity check SHT_MIPS_OPTIONS size
+ * elfxx-mips.c (_bfd_mips_elf_section_from_shdr): Use
+ bfd_malloc_and_get_section to read contents of .MIPS.options.
+
+ Re: gold: add --compress-debug-sections=zstd [PR 29641]
+ Fix the following:
+ compressed_output.cc:86:8: error: assignment of read-only variable ‘size’
+ 86 | size = ZSTD_compress(*compressed_data + header_size, size, uncompressed_data,
+
+2022-11-11 Fangrui Song <maskray@google.com>
+
+ gold: add --compress-debug-sections=zstd [PR 29641]
+ This option compresses output debug sections with zstd and sets ch_type
+ to ELFCOMPRESS_ZSTD. Latest gdb and lldb support ELFCOMPRESS_ZSTD.
+
+ There will be an error if zstd is not enabled at configure time.
+
+ error: --compress-debug-sections=zstd: gold is not built with zstd support
+
+2022-11-11 Fangrui Song <maskray@google.com>
+
+ gold, dwp: support zstd compressed input debug sections [PR 29641]
+ This feature is enabled if config/zstd.m4 uses zstd.
+
+2022-11-11 Vladimir Mezentsev <vladimir.mezentsev@oracle.com>
+
+ gprofng: fix typo in configure.ac
+ gprofng/ChangeLog
+ 2022-11-10 Vladimir Mezentsev <vladimir.mezentsev@oracle.com>
+
+ * configure.ac: Fix typo in redirect operator.
+ * configure: Rebuild.
+
+2022-11-11 Vladislav Khmelevsky <och95@yandex.ru>
+
+ Fix adrp distance check
+ gold/
+ * aarch64.cc (aarch64_valid_for_adrp_p): Shift offset
+ as a signed number.
+
+2022-11-11 GDB Administrator <gdbadmin@sourceware.org>
+
+ Automatic date update in version.in
+
+2022-11-10 Mike Frysinger <vapier@gentoo.org>
+
+ sim: v850: rename v850.dc to align with other ports
+ Other arches use the .dc extension for the instruction decode table.
+
+ sim: igen: fix hang when decoding boolean rule constants
+ The parser for boolean rules fails to skip over the , separator in
+ the options which makes it hang forever. No dc files in the tree
+ use boolean rules atm which is why no one noticed.
+
+ sim: igen: mark error func as noreturn since it exits
+
+ sim: igen: mark output funcs with printf attribute
+ ... and fix the legitimate bug that it catches.
+
+ sim: igen: constify various func arguments
+
+ sim: ppc: rename ppc-instructions to powerpc.igen
+ To make it clear this is an input to the igen tool, rename it with an
+ igen extension. This matches the other files in the ppc dir (altivec
+ & e500 igen files), and the other igen ports (mips, mn10300, v850).
+
+2022-11-10 H.J. Lu <hjl.tools@gmail.com>
+
+ i386: Check invalid (%dx) usage
+ (%dx) isn't a valid memory address in any modes. It is used as a special
+ memory operand for input/output port address in AT&T syntax and should
+ only be used with input/output instructions. Update i386_att_operand to
+ set i.input_output_operand to true for (%dx) and issue an error if (%dx)
+ is used with non-input/output instructions.
+
+ PR gas/29751
+ * config/tc-i386.c (_i386_insn): Add input_output_operand.
+ (md_assemble): Issue an error if input/output memory operand is
+ used with non-input/output instructions.
+ (i386_att_operand): Set i.input_output_operand to true for
+ (%dx).
+ * testsuite/gas/i386/inval.l: Updated.
+ * testsuite/gas/i386/x86-64-inval.l: Likewise.
+ * testsuite/gas/i386/inval.s: Add tests for invalid (%dx) usage.
+ * testsuite/gas/i386/x86-64-inval.s: Likewise.
+
+2022-11-10 Simon Marchi <simon.marchi@efficios.com>
+
+ gdb: make "start" breakpoint inferior-specific
+ I saw this failure on a CI:
+
+ (gdb) add-inferior
+ [New inferior 2]
+ Added inferior 2
+ (gdb) PASS: gdb.threads/vfork-multi-inferior.exp: method=non-stop: add-inferior
+ inferior 2
+ [Switching to inferior 2 [<null>] (<noexec>)]
+ (gdb) PASS: gdb.threads/vfork-multi-inferior.exp: method=non-stop: inferior 2
+ kill
+ The program is not being run.
+ (gdb) file /home/jenkins/workspace/binutils-gdb_master_linuxbuild/platform/jammy-amd64/target_board/unix/tmp/tmp.GYATAXR8Ku/gdb/testsuite/outputs/gdb.threads/vfork-multi-inferior/vfork-multi-inferior-sleep
+ Reading symbols from /home/jenkins/workspace/binutils-gdb_master_linuxbuild/platform/jammy-amd64/target_board/unix/tmp/tmp.GYATAXR8Ku/gdb/testsuite/outputs/gdb.threads/vfork-multi-inferior/vfork-multi-inferior-sleep...
+ (gdb) run &
+ Starting program: /home/jenkins/workspace/binutils-gdb_master_linuxbuild/platform/jammy-amd64/target_board/unix/tmp/tmp.GYATAXR8Ku/gdb/testsuite/outputs/gdb.threads/vfork-multi-inferior/vfork-multi-inferior-sleep
+ (gdb) PASS: gdb.threads/vfork-multi-inferior.exp: method=non-stop: run inferior 2
+ inferior 1
+ [Switching to inferior 1 [<null>] (<noexec>)]
+ (gdb) PASS: gdb.threads/vfork-multi-inferior.exp: method=non-stop: inferior 1
+ kill
+ The program is not being run.
+ (gdb) file /home/jenkins/workspace/binutils-gdb_master_linuxbuild/platform/jammy-amd64/target_board/unix/tmp/tmp.GYATAXR8Ku/gdb/testsuite/outputs/gdb.threads/vfork-multi-inferior/vfork-multi-inferior
+ Reading symbols from /home/jenkins/workspace/binutils-gdb_master_linuxbuild/platform/jammy-amd64/target_board/unix/tmp/tmp.GYATAXR8Ku/gdb/testsuite/outputs/gdb.threads/vfork-multi-inferior/vfork-multi-inferior...
+ (gdb) break should_break_here
+ Breakpoint 1 at 0x11b1: file /home/jenkins/workspace/binutils-gdb_master_linuxbuild/platform/jammy-amd64/target_board/unix/src/binutils-gdb/gdb/testsuite/gdb.threads/vfork-multi-inferior.c, line 25.
+ (gdb) PASS: gdb.threads/vfork-multi-inferior.exp: method=non-stop: break should_break_here
+ [Thread debugging using libthread_db enabled]
+ Using host libthread_db library "/lib/x86_64-linux-gnu/libthread_db.so.1".
+ start
+ Temporary breakpoint 2 at 0x11c0: -qualified main. (2 locations)
+ Starting program: /home/jenkins/workspace/binutils-gdb_master_linuxbuild/platform/jammy-amd64/target_board/unix/tmp/tmp.GYATAXR8Ku/gdb/testsuite/outputs/gdb.threads/vfork-multi-inferior/vfork-multi-inferior
+ [Thread debugging using libthread_db enabled]
+ Using host libthread_db library "/lib/x86_64-linux-gnu/libthread_db.so.1".
+
+ Thread 2.1 "vfork-multi-inf" hit Temporary breakpoint 2, main () at /home/jenkins/workspace/binutils-gdb_master_linuxbuild/platform/jammy-amd64/target_board/unix/src/binutils-gdb/gdb/testsuite/gdb.threads/vfork-multi-inferior-sleep.c:23
+ 23 sleep (30);
+ (gdb) FAIL: gdb.threads/vfork-multi-inferior.exp: method=non-stop: start inferior 1
+
+ What happens is:
+
+ 1. We start inferior 2 with "run&", it runs very slowly, takes time to
+ get to main
+ 2. We switch to inferior 1, and run "start"
+ 3. The temporary breakpoint inserted by "start" applies to all inferiors
+ 4. Inferior 2 hits that breakpoint and GDB reports that hit
+
+ To avoid this, breakpoints inserted by "start" should be
+ inferior-specific. However, we don't have a nice way to make
+ inferior-specific breakpoints yet. It's possible to make
+ pspace-specific breakpoints (for example how the internal_breakpoint
+ constructor does) by creating a symtab_and_line manually. However,
+ inferiors can share program spaces (usually on particular embedded
+ targets), so we could have a situation where two inferiors run the same
+ code in the same program space. In that case, it would just not be
+ possible to insert a breakpoint in one inferior but not the other.
+
+ A simple solution that should work all the time is to add a condition to
+ the breakpoint inserted by "start", to check the inferior reporting the
+ hit is the expected one. This is what this patch implements.
+
+ Add a test that does:
+
+ - start in background inferior 1 that sleeps before reaching its main
+ function (using a sleep in a global C++ object's constructor)
+ - start inferior 2 with the "start" command, which also sleeps before
+ reaching its main function
+ - validate that we hit the breakpoint in inferior 2
+
+ Without the fix, we hit the breakpoint in inferior 1 pretty much all the
+ time. There could be some unfortunate scheduling causing the test not
+ to catch the bug, for instance if the scheduler decides not to schedule
+ inferior 1 for a long time, but it would be really rare. If the bug is
+ re-introduced, the test will catch it much more often than not, so it
+ will be noticed.
+
+ Reviewed-By: Bruno Larsen <blarsen@redhat.com>
+ Approved-By: Pedro Alves <pedro@palves.net>
+ Change-Id: Ib0148498a476bfa634ed62353c95f163623c686a
+
+2022-11-10 Bruno Larsen <blarsen@redhat.com>
+
+ gdb: Fix regressions caused by 041de3d73aa121f2ff0c077213598963bfb34b79
+ Commit 041de3d73aa changed the output format of all error messages when
+ GDB couldn't determine a compatible overload for a given function, but
+ it was only supposed to change if the failure happened due to incomplete
+ types. This commit removes the stray . that was added
+
+2022-11-10 Aaron Merey <amerey@redhat.com>
+
+ gdb/debuginfod: Improve progress updates
+ If the download size is known, a progress bar is displayed along with
+ the percentage of completion and the total download size.
+
+ Downloading separate debug info for /lib/libxyz.so
+ [############ ] 25% (10.01 M)
+
+ If the download size is not known, a progress indicator is displayed
+ with a ticker ("###") that moves across the screen at a rate of 1 tick
+ every 0.5 seconds.
+
+ Downloading separate debug info for /lib/libxyz.so
+ [ ### ]
+
+ If the output stream is not a tty, batch mode is enabled, the screen is
+ too narrow or width has been set to 'unlimited', then only a static
+ description of the download is printed. No bar or ticker is displayed.
+
+ Downloading separate debug info for /lib/libxyz.so...
+
+ In any case, if the size of the download is known at the time the
+ description is printed then it will be included in the description.
+
+ Downloading 10.01 MB separate debug info for /lib/libxyz.so...
+
+2022-11-10 Simon Marchi <simon.marchi@efficios.com>
+
+ gdb: add special handling for frame level 0 in frame_info_ptr
+ I noticed this problem while preparing the initial submission for the
+ ROCm GDB port. One particularity of this patch set is that it does not
+ support unwinding frames, that requires support of some DWARF extensions
+ that will come later. It was still possible to run to a breakpoint and
+ print frame #0, though.
+
+ When rebasing on top of the frame_info_ptr work, GDB started tripping on
+ a prepare_reinflate call, making it not possible anymore to event print
+ the frame when stopping on a breakpoint. One thing to know about frame
+ 0 is that its id is lazily computed when something requests it through
+ get_frame_id. See:
+
+ https://gitlab.com/gnutools/binutils-gdb/-/blob/23912acd402f5af9caf91b257e5209ec4c58a09c/gdb/frame.c#L2070-2080
+
+ So, up to that prepare_reinflate call, frame 0's id was not computed,
+ and prepare_reinflate, calling get_frame_id, forces it to be computed.
+ Computing the frame id generally requires unwinding the previous frame,
+ which with my ROCm GDB patch fails. An exception is thrown and the
+ printing of the frame is simply abandonned.
+
+ Regardless of this ROCm GDB problem (which is admittedly temporary, it
+ will be possible to unwind with subsequent patches), we want to avoid
+ prepare_reinflate to force the computing of the frame id, for the same
+ reasons we lazily compute it in the first place.
+
+ In addition, frame 0's id is subject to change across a frame cache
+ reset. This is why save_selected_frame and restore_selected_frame have
+ special handling for frame 0:
+
+ https://gitlab.com/gnutools/binutils-gdb/-/blob/23912acd402f5af9caf91b257e5209ec4c58a09c/gdb/frame.c#L1841-1863
+
+ For this last reason, we also need to handle frame 0 specially in
+ prepare_reinflate / reinflate. Because the frame id of frame 0 can
+ change across a frame cache reset, we must not rely on the frame id from
+ that frame to reinflate it. We should instead just re-fetch the current
+ frame at that point.
+
+ This patch adds a frame_info_ptr::m_cached_level field, set in
+ frame_info_ptr::prepare_reinflate, so we can tell if a frame is frame 0.
+ There are cases where a frame_info_ptr object wraps a sentinel frame,
+ for which frame_relative_level returns -1, so I have chosen the value -2
+ to represent "invalid frame level", for when the frame_info_ptr object
+ is empty.
+
+ In frame_info_ptr::prepare_reinflate, only cache the frame id if the
+ frame level is not 0. It's fine to cache the frame id for the sentinel
+ frame, it will be properly handled by frame_find_by_id later.
+
+ In frame_info_ptr::reinflate, if the frame level is 0, call
+ get_current_frame to get the target's current frame. Otherwise, use
+ frame_find_by_id just as before.
+
+ This patch should not have user-visible changes with upstream GDB. But
+ it will avoid forcing the computation of frame 0's when calling
+ prepare_reinflate. And, well, it fixes the upcoming ROCm GDB patch
+ series.
+
+ Change-Id: I176ed7ee9317ddbb190acee8366e087e08e4d266
+ Reviewed-By: Bruno Larsen <blarsen@redhat.com>
+
+2022-11-10 Simon Marchi <simon.marchi@polymtl.ca>
+
+ gdb: add missing prepare_reinflate call in print_frame_info
+ print_frame_info calls frame_info_ptr::reinflate, but not
+ frame_info_ptr::prepare_reinflate, add the call to prepare_reinflate.
+ It works right now, because all callers of print_frame_info that could
+ possibly lead to the pretty printers being called, and the frame_info
+ objects being invalidated, do call prepare_reinflate themselves. And
+ since the cached frame id is copied when passing a frame_info_ptr by
+ value, print_frame_info does have a cached frame id on entry. So
+ technically, this change isn't needed. But I don't think it's good for
+ a function to rely on its callers to have called prepare_reinflate, if
+ it intends to call reinflate.
+
+ Change-Id: Ie332b2d5479aef46f83fdc1120c7c83f4e84d1b0
+ Reviewed-By: Bruno Larsen <blarsen@redhat.com>
+
+2022-11-10 Simon Marchi <simon.marchi@efficios.com>
+
+ gdb: use frame_id_p instead of comparing to null_frame_id in frame_info_ptr::reinflate
+ The assertion
+
+ gdb_assert (m_cached_id != null_frame_id);
+
+ is always true, as comparing equal to null_frame_id is always false
+ (it's the first case in frame_id::operator==, not sure why it's not this
+ way, but that's what it is).
+
+ Replace the comparison with a call to frame_id_p.
+
+ Approved-By: Tom Tromey <tom@tromey.com>
+ Change-Id: I93986e6a85ac56353690792552e5b3b4cedec7fb
+
+2022-11-10 Simon Marchi <simon.marchi@efficios.com>
+
+ gdb: remove manual frame_info reinflation code in backtrace_command_1
+ With the following patch applied (gdb: use frame_id_p instead of
+ comparing to null_frame_id in frame_info_ptr::reinflate), I would get:
+
+ $ ./gdb -q -nx --data-directory=data-directory testsuite/outputs/gdb.base/bt-selected-frame/bt-selected-frame -ex "b breakpt" -ex r -ex "bt full"
+ Reading symbols from testsuite/outputs/gdb.base/bt-selected-frame/bt-selected-frame...
+ Breakpoint 1 at 0x1131: file /home/smarchi/src/binutils-gdb/gdb/testsuite/gdb.base/bt-selected-frame.c, line 22.
+ Starting program: /home/smarchi/build/binutils-gdb/gdb/testsuite/outputs/gdb.base/bt-selected-frame/bt-selected-frame
+ [Thread debugging using libthread_db enabled]
+ Using host libthread_db library "/lib/x86_64-linux-gnu/libthread_db.so.1".
+
+ Breakpoint 1, breakpt () at /home/smarchi/src/binutils-gdb/gdb/testsuite/gdb.base/bt-selected-frame.c:22
+ 22 }
+ #0 breakpt () at /home/smarchi/src/binutils-gdb/gdb/testsuite/gdb.base/bt-selected-frame.c:22
+ No locals.
+ /home/smarchi/src/binutils-gdb/gdb/frame-info.c:42: internal-error: reinflate: Assertion `frame_id_p (m_cached_id)' failed.
+
+ This is because the code in backtrace_command_1 to manually reinflate
+ `fi` steps overs frame_info_ptr's toes.
+
+ When calling
+
+ fi.prepare_reinflate ();
+
+ `fi` gets properly filled with the cached frame id. But when this
+ happens:
+
+ fi = frame_find_by_id (frame_id);
+
+ `fi` gets replaced by a brand new frame_info_ptr that doesn't have a
+ cached frame id. Then this is called without a cached frame id:
+
+ fi.reinflate ();
+
+ That doesn't cause any problem currently, since
+
+ - the gdb_assert in the reinflate method doesn't actually do anything
+ (the following patch fixes that)
+ - `fi.m_ptr` will always be non-nullptr, since we just got it from
+ frame_find_by_id, so reinflate will not do anything, it won't try to
+ use m_cached_id
+
+ Fix that by removing the code to manually re-fetch the frame. That
+ should be taken care of by frame_info_ptr::reinflate.
+
+ Note that the old code checked if we successfully re-inflated the frame
+ or not, and if not it did emit a warning. The equivalent in
+ frame_info_ptr::reinflate asserts that the frame has been successfully
+ re-inflated. It's not clear if / when this can happen, but if it can
+ happen, we'll need to find a solution to this problem globally
+ (everywhere a frame_info_ptr can be re-inflated), not just here. So I
+ propose to leave it like this, until it does become a problem.
+
+ Reviewed-By: Bruno Larsen <blarsen@redhat.com>
+ Change-Id: I07b783d94e2853e0a2d058fe7deaf04eddf24835
+
+2022-11-10 Simon Marchi <simon.marchi@polymtl.ca>
+
+ gdb: move frame_info_ptr method implementations to frame-info.c
+ I don't see any particular reason why the implementations of the
+ frame_info_ptr object are in the header file. It only seems to add some
+ complexity. Since we can't include frame.h in frame-info.h, we have to
+ add declarations of functions defined in frame.c, in frame-info.h. By
+ moving the implementations to a new frame-info.c, we can avoid that.
+
+ Change-Id: I435c828f81b8a3392c43ef018af31effddf6be9c
+ Reviewed-By: Bruno Larsen <blarsen@redhat.com>
+ Reviewed-By: Tom Tromey <tom@tromey.com>
+
+2022-11-10 Simon Marchi <simon.marchi@polymtl.ca>
+
+ gdb: add prepare_reinflate/reinflate around print_frame_args in info_frame_command_core
+ I noticed this crash:
+
+ $ ./gdb --data-directory=data-directory -nx -q \
+ testsuite/outputs/gdb.python/pretty-print-call-by-hand/pretty-print-call-by-hand \
+ -x testsuite/outputs/gdb.python/pretty-print-call-by-hand/pretty-print-call-by-hand.py \
+ -ex "b g" -ex r
+ (gdb) info frame
+ Stack level 0, frame at 0x7fffffffdd80:
+ rip = 0x555555555160 in g
+ (/home/simark/src/binutils-gdb/gdb/testsuite/gdb.python/pretty-print-call-by-hand.c:41); saved rip = 0x5555555551a3
+ called by frame at 0x7fffffffdda0
+ source language c.
+ Arglist at 0x7fffffffdd70, args: mt=mytype is 0x555555556004 "hello world",
+ depth=10
+
+ Fatal signal: Segmentation fault
+
+ This is another case of frame_info being invalidated under a function's
+ feet. The stack trace when the frame_info get invalidated looks like:
+
+ ... many frames to pretty print the arg, that eventually invalidate the frame_infos ...
+ #35 0x00005568d0a8ab24 in print_frame_arg (fp_opts=..., arg=0x7ffc3216bcb0) at /home/simark/src/binutils-gdb/gdb/stack.c:489
+ #36 0x00005568d0a8cc75 in print_frame_args (fp_opts=..., func=0x621000233210, frame=..., num=-1, stream=0x60b000000300)
+ at /home/simark/src/binutils-gdb/gdb/stack.c:898
+ #37 0x00005568d0a9536d in info_frame_command_core (fi=..., selected_frame_p=true) at /home/simark/src/binutils-gdb/gdb/stack.c:1682
+
+ print_frame_args knows that print_frame_arg can invalidate frame_info
+ objects, and therefore calls prepare_reinflate/reinflate. However,
+ info_frame_command_core has a separate frame_info_ptr instance (it is
+ passed by value / copy). So info_frame_command_core needs to know that
+ print_frame_args can invalidate frame_info objects, and therefore needs
+ to prepare_reinflate/reinflate as well. Add those calls, and enhance
+ the gdb.python/pretty-print-call-by-hand.exp test to test that command.
+
+ Reviewed-By: Bruno Larsen <blarsen@redhat.com>
+ Change-Id: I9edaae06d62e97ffdb30938d364437737238a960
+
+2022-11-10 Simon Marchi <simon.marchi@polymtl.ca>
+
+ gdb: clear other.m_cached_id in frame_info_ptr's move ctor
+ We do it in the move assignment operator, so I think it makes sense to
+ do it here too for consistency. I don't think it's absolutely necessary
+ to clear the other object's fields (in other words, copy constructor and
+ move constructor could be the same), as there is no exclusive resource
+ being transfered. The important thing is to leave the moved-from object
+ in an unknown, but valid state. But still, I think that clearing the
+ fields of the moved-from object is not a bad idea, it helps ensure we
+ don't rely on the moved-from object after.
+
+ Change-Id: Iee900ff9d25dad51d62765d694f2e01524351340
+ Reviewed-By: Bruno Larsen <blarsen@redhat.com>
+
+2022-11-10 Bruno Larsen <blarsen@redhat.com>
+
+ gdb/c++: Improve error messages in overload resolution
+ When resolving overloaded functions, GDB relies on knowing relationships
+ between types, i.e. if a type inherits from another. However, some
+ compilers may not add complete information for given types as a way to
+ reduce unnecessary debug information. In these cases, GDB would just say
+ that it couldn't resolve the method or function, with no extra
+ information.
+
+ The problem is that sometimes the user may not know that the type
+ information is incomplete, and may just assume that there is a bug in
+ GDB. To improve the user experience, we attempt to detect if the
+ overload match failed because of an incomplete type, and warn the user
+ of this.
+
+ This commit also adds a testcase confirming that the message is only
+ triggered in the correct scenario. This test was not developed as an
+ expansion of gdb.cp/overload.cc because it needed the dwarf assembler,
+ and porting all of overload.cc seemed unnecessary.
+
+ Approved-By: Tom Tromey <tom@tromey.com>
+
+2022-11-10 Bruno Larsen <blarsen@redhat.com>
+
+ gdb/testsuite: allowed for function_range to deal with mangled functions
+ When calling get_func_info inside a test case, it would cause failures
+ if the function was printed using a C++ style mangled name. The current
+ patch fixes this by allowing for mangled names along with the current
+ rules.
+
+ Approved-By: Tom Tromey <tom@tromey.com>
+
+2022-11-10 Clément Chigot <chigot@adacore.com>
+
+ ld/testsuite: skip ld-size when -shared is not supported
+ ld/ChangeLog:
+
+ * testsuite/ld-size/size.exp: Skip when -shared is not
+ supported.
+
+2022-11-10 Alan Modra <amodra@gmail.com>
+
+ mach-o reloc size overflow
+ * mach-o.c (bfd_mach_o_canonicalize_reloc): Set bfd_error on
+ multiply overflow.
+
+2022-11-10 Alan Modra <amodra@gmail.com>
+
+ Sanity check reloc count in get_reloc_upper_bound
+ The idea here is the stop tools from allocating up to 32G per section
+ for the arelent pointer array, only to find a little later that the
+ section reloc count was fuzzed. This usually doesn't hurt much (on
+ systems that allow malloc overcommit) except when compiled with asan.
+
+ We already do this for ELF targets, and while fixing the logic
+ recently I decided other targets ought to do the same.
+
+ * elf64-sparc.c (elf64_sparc_get_reloc_upper_bound): Sanity check
+ section reloc count against file size.
+ * mach-o.c (bfd_mach_o_get_reloc_upper_bound): Likewise.
+ * aoutx.h (get_reloc_upper_bound): Likewise, and don't duplicate
+ check done in bfd_get_reloc_upper_bound.
+ * pdp11.c (get_reloc_upper_bound): Likewise.
+ * coffgen.c (coff_get_reloc_upper_bound): Likewise.
+
+2022-11-10 Lancelot SIX <lancelot.six@amd.com>
+
+ gdb/testsuite: Fix rtld-step-nodebugsym.exp
+ The test case introduced in bafcc335266 (Fix stepping in rtld without
+ debug symbol) fails on some systems as reported by PR/29768. This can
+ be seen if the system does not have debug info for the libc:
+
+ (gdb) step^M
+ Single stepping until exit from function main,^M
+ which has no line number information.^M
+ hello world[Inferior 1 (process 48203) exited normally]^M
+ (gdb) PASS: gdb.base/rtld-step-nodebugsym.exp: step
+ continue^M
+ The program is not being run.^M
+ (gdb) FAIL: gdb.base/rtld-step-nodebugsym.exp: continue until exit (the program is no longer running)
+
+ Without glibc debug info, GDB steps until the program finishes, and
+ then "gdb_continue_to_end" fails.
+
+ As this test was designed to check that GDB does not crash in the "step"
+ command, the continue does not carry real meaning to the test.
+
+ Replace it by "print 0" so we still check that after the step command
+ GDB is still alive, which is what we care about.
+
+ Tested on Ubuntu-22.04 x86_64, with and without libc6-dbg.
+
+ Bug: https://sourceware.org/bugzilla/show_bug.cgi?id=29768
+ Approved-By: Simon Marchi <simon.marchi@efficios.com>
+
+2022-11-10 Mike Frysinger <vapier@gentoo.org>
+
+ sim: ppc: drop old makefile fragment
+ Support for these files was dropped almost 30 years ago, but the ppc
+ arch was missed. Clean that up now too.
+
+ sim: ppc: drop support for dgen -L option
+ Nothing passes this to dgen, and even if it did, nothing would happen
+ because the generated spreg.[ch] files don't include any references
+ back to the original data table. So drop it to simplify.
+
+ sim: ppc: collapse is_readonly & length switch tables heavily
+ Since we know we'll return 0 by default, we don't have to output case
+ statements for readonly or length fields whose values are also zero.
+ This is the most common case by far and thus generates a much smaller
+ switch table in the end.
+
+2022-11-10 Mike Frysinger <vapier@gentoo.org>
+
+ sim: ppc: collapse is_valid switch table more
+ Instead of writing:
+ case 1:
+ return 1;
+ case 2:
+ return 1;
+ ...etc...
+
+ Output a single return so we get:
+ case 1:
+ case 2:
+ case ...
+ return 1;
+
+ This saves ~100 lines of code. Hopefully the compiler was already
+ smart enough to optimize to the same code, but if not, this probably
+ helps there too :).
+
+2022-11-10 Mike Frysinger <vapier@gentoo.org>
+
+ sim: ppc: pull default switch return out
+ This saves a single line for the same result. By itself, it's not
+ interesting, but we can further optimize the generated output and
+ completely omit the switch table in some cases. Which we'll do in
+ follow up commits.
+
+ sim: ppc: constify spreg table
+ This internal table is only ever read, so constify it.
+
+2022-11-10 Mark Harmstone <mark@harmstone.com>
+
+ ld: Add module information substream to PDB files
+
+2022-11-10 Luis Machado <luis.machado@arm.com>
+
+ [opcodes/arm] Fix potential null pointer dereferences
+ PR tdep/29598
+
+ As pointed out in the bug ticket, we have a couple potential null pointer
+ dereferencing situations. Harden those.
+
+ Bug: https://sourceware.org/bugzilla/show_bug.cgi?id=29598
+
+2022-11-10 Luis Machado <luis.machado@arm.com>
+
+ [gdb/aarch64] Use safer memory read routines
+ PR tdep/28796
+
+ As reported, we are using some memory read routines that don't handle read
+ errors gracefully. Convert those to use the safe_* versions if available.
+
+ This allows the code to handle those read errors in a more sensible way.
+
+ Bug: https://sourceware.org/bugzilla/show_bug.cgi?id=28796
+
+2022-11-10 GDB Administrator <gdbadmin@sourceware.org>
+
+ Automatic date update in version.in
+
+2022-11-09 Lancelot SIX <lancelot.six@amd.com>
+
+ Fix stepping in rtld without debug symbol
+ Commit be6276e0aed "Allow debugging of runtime loader / dynamic linker"
+ introduced a small regression when stepping into the runtime loader /
+ dynamic linker from function we do not have debug information for. This
+ is reported in PR/29747.
+
+ This can be shown by the following example (given by Simon Marchi in
+ buzilla bug report):
+
+ $ cat test.c
+ #include <stdio.h>
+
+ int main()
+ {
+ printf("Hi\n");
+ return 0;
+ }
+ $ gcc test.c -O0 -o test
+ $ ./gdb -q -nx --data-directory=data-directory test -ex start -ex s
+ Reading symbols from test...
+ (No debugging symbols found in test)
+ Temporary breakpoint 1 at 0x1151
+ Starting program: .../binutils-gdb/gdb/test
+ [Thread debugging using libthread_db enabled]
+ Using host libthread_db library "/lib/x86_64-linux-gnu/libthread_db.so.1".
+
+ Temporary breakpoint 1, 0x0000555555555151 in main ()
+ Single stepping until exit from function main,
+ which has no line number information.
+ /home/smarchi/src/binutils-gdb/gdb/infrun.c:6960:64: runtime error: member call on null pointer of type 'struct symbol'
+
+ The crash happens here:
+
+ #0 __sanitizer::Die () at ../../../../src/libsanitizer/sanitizer_common/sanitizer_termination.cpp:50
+ #1 0x00007ffff5dd7128 in __ubsan::__ubsan_handle_type_mismatch_v1_abort (Data=<optimized out>, Pointer=<optimized out>) at ../../../../src/libsanitizer/ubsan/ubsan_handlers.cpp:148
+ #2 0x000055556183e1a7 in process_event_stop_test (ecs=0x7fffffffccd0) at .../binutils-gdb/gdb/infrun.c:6960
+ #3 0x0000555561838ea4 in handle_signal_stop (ecs=0x7fffffffccd0) at .../binutils-gdb/gdb/infrun.c:6615
+ #4 0x000055556182f77b in handle_inferior_event (ecs=0x7fffffffccd0) at .../binutils-gdb/gdb/infrun.c:5866
+
+ When evaluating:
+
+ 6956 if (execution_direction != EXEC_REVERSE
+ 6957 && ecs->event_thread->control.step_over_calls == STEP_OVER_UNDEBUGGABLE
+ 6958 && in_solib_dynsym_resolve_code (ecs->event_thread->stop_pc ())
+ 6959 && !in_solib_dynsym_resolve_code (
+ 6961 ecs->event_thread->control.step_start_function->value_block ()
+ 6962 ->entry_pc ()))
+
+ we dereference, ecs->event_thread->control.step_start_function which is
+ nullptr.
+
+ This patch changes this condition so it evaluates to true if
+ ecs->event_thread->control.step_start_function is nullptr since this
+ matches the behaviour before be6276e0aed.
+
+ Tested on ubuntu-22.04 x86_64.
+
+ Bug: https://sourceware.org/bugzilla/show_bug.cgi?id=29747
+ Reviewed-By: Bruno Larsen <blarsen@redhat.com>
+ Approved-By: Kevin Buettner <kevinb@redhat.com>
+
+2022-11-09 Mike Frysinger <vapier@gentoo.org>
+
+ sim: igen: add missing newline to various error messages
+ The error() function expects a trailing newline in its message.
+ Most callers do this already, so adding it to the few that don't.
+
+ sim: restore lstat & mkdir func checks
+ When merging ppc configure checks into the top-level, these 2 funcs
+ were accidentally dropped (probably due to incorrect resolution of
+ conflicts). Restore them since the ppc code utilizes them both.
+
+ sim: ppc: drop obsolete USE_WIN32API check
+ This controls only one thing: how to call mkdir(). The gnulib code
+ already has a mkdir module that provides this exact logic for us, so
+ punt the code entirely.
+
+2022-11-09 Tankut Baris Aktemur <tankut.baris.aktemur@intel.com>
+
+ gdbserver: do not report btrace support if target does not announce it
+ Gdbserver unconditionally reports support for btrace packets. Do not
+ report the support, if the underlying target does not say it supports
+ it. Otherwise GDB would query the server with btrace-related packets
+ unnecessarily.
+
+2022-11-09 Tom Tromey <tromey@adacore.com>
+
+ Allow 'ptype/o' for assembly
+ PR exp/28359 points out that 'ptype/o' does not work when the current
+ language is "asm".
+
+ I tracked this down to a hard-coded list of languages in typeprint.c.
+ This patch replaces this list with a method on 'language_defn'
+ instead. If all languages are ever updated to have this feature, the
+ method could be removed; but in the meantime this lets each language
+ control what happens.
+
+ I looked at having each print_type method simply modify the flags
+ itself, but this doesn't work very well with the feature that disables
+ method-printing by default (but allows it via a flag).
+
+ Bug: https://sourceware.org/bugzilla/show_bug.cgi?id=28359
+ Approved-By: Andrew Burgess <aburgess@redhat.com>
+ Approved-By: Keith Seitz <keiths@redhat.com>
+
+2022-11-09 Mike Frysinger <vapier@gentoo.org>
+
+ sim: ppc: add missing parens with e500 macro
+ This macro expansion was missing a set of outer-most parenthesis which
+ some compilers would complain about depending on how the macro is used.
+ This is just standard good macro hygiene too.
+
+ sim: ppc: drop useless linking of helper tools
+ We've never run these helper programs directly. The igen program
+ includes the relevant source files directly and runs the code that
+ way. So stop wasting developer CPU time linking programs that are
+ never run. We leave the rules in place for people who need to test
+ and debug the specific bits of code every now & then.
+
+2022-11-09 Jan Beulich <jbeulich@suse.com>
+
+ x86/Intel: don't accept malformed EXTRQ / INSERTQ
+ Operand swapping was mistakenly suppressed when the first two operands
+ were immediate ones, not taking into account overall operand count. This
+ way EXTRQ / INSERTQ would have been accepted also with kind-of-AT&T
+ operand order.
+
+ For the testcase being extended, in order to not move around "GAS
+ LISTING" expectations, suppress pagination.
+
+2022-11-09 Alan Modra <amodra@gmail.com>
+
+ Re: Fuzzed files in archives
+ Like commit ffbe89531c2e this avoids more silliness writing output
+ that is going to be deleted. bfd_close and bfd_close_all_done differ
+ in that only the former calls _bfd_write_contents.
+
+ * objcopy.c (copy_archive): Don't call bfd_close for elements
+ that are going to be deleted, call bfd_close_all_done instead.
+ Do the same for the archive itself.
+
+2022-11-09 Christoph Müllner <christoph.muellner@vrull.eu>
+
+ RISC-V: xtheadfmemidx: Use fp register in mnemonics
+ Although the encoding for scalar and fp registers is identical,
+ we should follow common pratice and use fp register names
+ when referencing fp registers.
+
+ The xtheadmemidx extension consists of indirect load/store instructions
+ which all load to or store from fp registers.
+ Let's use fp register names in this case and adjust the test cases
+ accordingly.
+
+ gas/
+ * testsuite/gas/riscv/x-thead-fmemidx-fail.l: Updated since rd need to
+ be float register.
+ * testsuite/gas/riscv/x-thead-fmemidx-fail.s: Likewise.
+ * testsuite/gas/riscv/x-thead-fmemidx.d: Likewise.
+ * testsuite/gas/riscv/x-thead-fmemidx.s: Likewise.
+ opcodes/
+ * riscv-opc.c (riscv_opcodes): Updated since rd need to be float register.
+
+2022-11-09 H.J. Lu <hjl.tools@gmail.com>
+
+ ld: Always output local symbol for relocatable link
+ PR ld/29761
+ * elflink.c (elf_link_output_symstrtab): Don't skip local symbol
+ in SEC_EXCLUDE section for relocatable link.
+
+2022-11-09 GDB Administrator <gdbadmin@sourceware.org>
+
+ Automatic date update in version.in
+
+2022-11-08 Simon Marchi <simon.marchi@efficios.com>
+
+ gdb/linux-nat: get core count using /sys/devices/system/cpu/possible
+ I get this test failure on my CI;
+
+ FAIL: gdb.base/info-os.exp: get process list
+
+ The particularity of this setup is that builds are done in containers
+ who are allocated 4 CPUs on a machine that has 40. The code in
+ nat/linux-osdata.c fails to properly fetch the core number for each
+ task.
+
+ linux_xfer_osdata_processes uses `sysconf (_SC_NPROCESSORS_ONLN)`, which
+ returns 4, so it allocates an array of 4 integers. However, the core
+ numbers read from /proc/pid/task/tid/stat, by function
+ linux_common_core_of_thread, returns a value anywhere between 0 and 39.
+ The core numbers above 3 are therefore ignored, many processes end up
+ with no core value, and the regexp in the test doesn't match (it
+ requires an integer as the core field).
+
+ The way this the CPUs are exposed to the container is that the container
+ sees 40 CPUs "present" and "possible", but only 4 arbitrary CPUs
+ actually online:
+
+ root@ci-node-jammy-amd64-04-08:~# cat /sys/devices/system/cpu/present
+ 0-39
+ root@ci-node-jammy-amd64-04-08:~# cat /sys/devices/system/cpu/online
+ 5,11,24,31
+ root@ci-node-jammy-amd64-04-08:~# cat /sys/devices/system/cpu/possible
+ 0-39
+
+ The solution proposed in this patch is to find out the number of
+ possible CPUs using /sys/devices/system/cpu/possible. In practice, this
+ will probably always contain `0-N`, where N is the number of CPUs, minus
+ one. But the documentation [1] doesn't such guarantee, so I'll assume
+ that it can contain a more complex range list such as `2,4-31,32-63`,
+ like the other files in that directory can have. The solution is to
+ iterate over these numbers to find the highest possible CPU id, and
+ use that that value plus one as the size of the array to allocate.
+
+ [1] https://www.kernel.org/doc/Documentation/admin-guide/cputopology.rst
+
+ Change-Id: I7abce2e43b000c1327fa94cd7b99d46e49d7ccf3
+
+2022-11-08 Simon Marchi <simon.marchi@efficios.com>
+
+ gdbsupport, gdb: add read_text_file_to_string, use it in linux_common_core_of_thread
+ I would like to add more code to nat/linux-osdata.c that reads an entire
+ file from /proc or /sys and processes it as a string afterwards. I
+ would like to avoid duplicating the somewhat error-prone code that reads
+ an entire file to a buffer. I think we should have a utility function
+ that does that.
+
+ Add read_file_to_string to gdbsupport/filestuff.{c,h}, and make
+ linux_common_core_of_thread use it. I want to make the new function
+ return an std::string, and because strtok doesn't play well with
+ std::string (it requires a `char *`, std::string::c_str returns a `const
+ char *`), change linux_common_core_of_thread to use std::string methods
+ instead.
+
+ Approved-By: Tom Tromey <tom@tromey.com>
+ Change-Id: I1793fda72a82969c28b944a84acb953f74c9230a
+
+2022-11-08 Peter Bergner <bergner@linux.ibm.com>
+
+ PowerPC: Add XSP operand define
+ opcodes/
+ * ppc-opc.c (XSP): New define.
+ (powerpc_opcodes) <stxvp, stxvpx, pstxvp>: Use it.
+
+2022-11-08 Tom de Vries <tdevries@suse.de>
+
+ [gdb/cli] Make quit really quit after remote connection closed
+ Consider a hello world a.out, started using gdbserver:
+ ...
+ $ gdbserver --once 127.0.0.1:2345 ./a.out
+ Process ./a.out created; pid = 15743
+ Listening on port 2345
+ ...
+ that we can connect to using gdb:
+ ...
+ $ gdb -ex "target remote 127.0.0.1:2345"
+ Remote debugging using 127.0.0.1:2345
+ Reading /home/vries/a.out from remote target...
+ ...
+ 0x00007ffff7dd4550 in _start () from target:/lib64/ld-linux-x86-64.so.2
+ (gdb)
+ ...
+
+ After that, we can for instance quit with confirmation:
+ ...
+ (gdb) quit
+ A debugging session is active.
+
+ Inferior 1 [process 16691] will be killed.
+
+ Quit anyway? (y or n) y
+ $
+ ...
+
+ Or, kill with confirmation and quit:
+ ...
+ (gdb) kill
+ Kill the program being debugged? (y or n) y
+ [Inferior 1 (process 16829) killed]
+ (gdb) quit
+ $
+ ...
+
+ Or, monitor exit, kill with confirmation, and quit:
+ ...
+ (gdb) monitor exit
+ (gdb) kill
+ Kill the program being debugged? (y or n) y
+ Remote connection closed
+ (gdb) quit
+ $
+ ...
+
+ But when doing monitor exit followed by quit with confirmation, we get the gdb
+ prompt back, requiring us to do quit once more:
+ ...
+ (gdb) monitor exit
+ (gdb) quit
+ A debugging session is active.
+
+ Inferior 1 [process 16944] will be killed.
+
+ Quit anyway? (y or n) y
+ Remote connection closed
+ (gdb) quit
+ $
+ ...
+
+ So, the first quit didn't quit. This happens as follows:
+ - quit_command calls query_if_trace_running
+ - a TARGET_CLOSE_ERROR is thrown
+ - it's caught in remote_target::get_trace_status, but then
+ rethrown because it's TARGET_CLOSE_ERROR
+ - catch_command_errors catches the error, at which point the quit command
+ has been aborted.
+
+ The TARGET_CLOSE_ERROR is defined as:
+ ...
+ /* Target throwing an error has been closed. Current command should be
+ aborted as the inferior state is no longer valid. */
+ TARGET_CLOSE_ERROR,
+ ...
+ so in a way this is expected behaviour. But aborting quit because the inferior
+ state (which we've already confirmed we're not interested in) is no longer
+ valid, and having to type quit again seems pointless.
+
+ Furthermore, the purpose of not catching errors thrown by
+ query_if_trace_running as per commit 2f9d54cfcef ("make -gdb-exit call
+ disconnect_tracing too, and don't lose history if the target errors on
+ "quit""), was to make sure that error (_("Not confirmed.") had effect.
+
+ Fix this in quit_command by catching only the TARGET_CLOSE_ERROR exception
+ during query_if_trace_running and reporting it:
+ ...
+ (gdb) monitor exit
+ (gdb) quit
+ A debugging session is active.
+
+ Inferior 1 [process 19219] will be killed.
+
+ Quit anyway? (y or n) y
+ Remote connection closed
+ $
+ ...
+
+ Tested on x86_64-linux.
+
+ PR server/15746
+ Bug: https://sourceware.org/bugzilla/show_bug.cgi?id=15746
+ Approved-By: Tom Tromey <tom@tromey.com>
+
+2022-11-08 Tom de Vries <tdevries@suse.de>
+
+ [gdb/testsuite] Remove test-case from test name
+ Remove test-cases from test-names, such that we don't have the redundant:
+ ...
+ PASS: gdb.base/corefile.exp: backtrace in corefile.exp
+ ...
+ but simply:
+ ...
+ PASS: gdb.base/corefile.exp: backtrace
+ ...
+
+ Fixed all instances found using:
+ ...
+ $ grep ":.*:.*\.exp" gdb.sum
+ ...
+
+ Tested on x86_64-linux.
+
+2022-11-08 Tom de Vries <tdevries@suse.de>
+
+ [gdb/testsuite] Fix find_core_file for core named core
+ With test-case gdb.base/bigcore.exp I run into:
+ ...
+ (gdb) PASS: gdb.base/bigcore.exp: get inferior pid
+ signal SIGABRT^M
+ Continuing with signal SIGABRT.^M
+ ^M
+ Program terminated with signal SIGABRT, Aborted.^M
+ The program no longer exists.^M
+ (gdb) PASS: gdb.base/bigcore.exp: signal SIGABRT
+ UNTESTED: gdb.base/bigcore.exp: can't generate a core file
+ ...
+ due to find_core_file returning "".
+
+ There is a core file name core:
+ ...
+ $ ls ./outputs/gdb.base/bigcore
+ bigcore bigcore.corefile core gdb.cmd.1 gdb.in.1 gdbserver.cmd.1
+ ...
+ but it's not found.
+
+ The problem is this statement:
+ ...
+ lappend files [list ${::testfile}.core core]
+ ...
+ which adds a single list item "${::testfile}.core core".
+
+ Fix this in the most readable way:
+ ...
+ lappend files ${::testfile}.core
+ lappend files core
+ ...
+
+ Tested on x86_64-linux.
+
+2022-11-08 Mike Frysinger <vapier@gentoo.org>
+
+ sim: mips: call Unpredictable instead of setting bogus values [PR sim/29276]
+ The intention of this code seems to be to indicate that this insn
+ should not be used and produces undefined behavior, so instead of
+ setting registers to bogus values, call Unpredictable. This fixes
+ build warnings due to 32-bit/64-bit type conversions, and outputs
+ a log message for users at runtime instead of silent corruption.
+
+ Bug: https://sourceware.org/PR29276
+
+2022-11-08 Mike Frysinger <vapier@gentoo.org>
+
+ sim: drop unused CORE_ADDR_TYPE
+ This hasn't been used by gdb in decades, and doesn't make sense with
+ a standalone sim program/library where the ABI is fixed. So punt it
+ to simplify the code.
+
+2022-11-08 Haochen Jiang <haochen.jiang@intel.com>
+
+ x86: Correct wrong comments in vex_w_table
+ Hi all,
+
+ This wrong comment was introduced by previous AVX-VNNI-INT8 commit.
+
+ Committed as obvious fix.
+
+ BRs,
+ Haochen
+
+ opcodes/ChangeLog:
+
+ * i386-dis.c (VEX_W_0F3851): Corrected from
+ VEX_W_0F3851_P_0.
+
+2022-11-08 Kong Lingling <lingling.kong@intel.com>
+
+ Support Intel RAO-INT
+ gas/ChangeLog:
+
+ * NEWS: Support Intel RAO-INT.
+ * config/tc-i386.c: Add raoint.
+ * doc/c-i386.texi: Document .raoint.
+ * testsuite/gas/i386/i386.exp: Run RAO_INT tests.
+ * testsuite/gas/i386/raoint-intel.d: New test.
+ * testsuite/gas/i386/raoint.d: Ditto.
+ * testsuite/gas/i386/raoint.s: Ditto.
+ * testsuite/gas/i386/x86-64-raoint-intel.d: Ditto.
+ * testsuite/gas/i386/x86-64-raoint.d: Ditto.
+ * testsuite/gas/i386/x86-64-raoint.s: Ditto.
+
+ opcodes/ChangeLog:
+
+ * i386-dis.c (PREFIX_0F38FC): New.
+ (prefix_table): Add PREFIX_0F38FC.
+ * i386-gen.c: (cpu_flag_init): Add CPU_RAO_INT_FLAGS and
+ CPU_ANY_RAO_INT_FLAGS.
+ * i386-init.h: Regenerated.
+ * i386-opc.h: (CpuRAO_INT): New.
+ (i386_cpu_flags): Add cpuraoint.
+ * i386-opc.tbl: Add RAO_INT instructions.
+ * i386-tbl.h: Regenerated.
+
+2022-11-08 GDB Administrator <gdbadmin@sourceware.org>
+
+ Automatic date update in version.in
+
+2022-11-07 Tom Tromey <tromey@adacore.com>
+
+ Silence libtool during link
+ The switch to linking with libtool now shows a very long link line
+ even when V=0. This patch arranges to silence libtool in this
+ situation.
+
+ Approved-By: Simon Marchi <simon.marchi@efficios.com>
+
+2022-11-07 Simon Marchi <simon.marchi@efficios.com>
+
+ gdb: make lookup_selected_frame static
+ Change-Id: Ide2749a34333110c7f0112b25852c78cace0d2b4
+
+2022-11-07 Mike Frysinger <vapier@gentoo.org>
+
+ sim: riscv: add missing AC_MSG_RESULT call
+ Previous commit in here forgot to include this.
+
+ sim: v850: drop subdir configure logic
+ We've been using this only to set the default word size to 32. We
+ can easily move this into the makefile via a -D compiler flag and
+ clean up the build logic quite a bit.
+
+ sim: mn10300: drop subdir configure logic
+ We've been using this only to set the default word size to 32. We
+ can easily move this into the makefile via a -D compiler flag and
+ clean up the build logic quite a bit.
+
+ sim: or1k: drop subdir configure logic
+ We've been using this only to set the default word size to 32. We
+ can easily move this into the makefile via a -D compiler flag and
+ clean up the build logic quite a bit.
+
+ sim: bpf: drop subdir configure logic
+ We've been using this only to set the default word size to 64. We
+ can easily move this into the makefile via a -D compiler flag and
+ clean up the build logic quite a bit.
+
+ sim: riscv: drop subdir configure logic
+ We've been using this only to set the default word size to 32-vs-64
+ based on the $target. We can easily merge this with the top-level
+ configure script to clean things up a bit.
+
+2022-11-07 Jose E. Marchesi <jose.marchesi@oracle.com>
+
+ gdb: link executables with libtool
+ This patch changes the GDB build system in order to use libtool to
+ link the several built executables. This makes it possible to refer
+ to libtool libraries (.la files) in CLIBS.
+
+ As an application of the above,
+
+ BFD now refers to ../libbfd/libbfd.la
+ OPCODES now refers to ../opcodes/libopcodes.la
+ LIBBACKTRACE_LIB now refers to ../libbacktrace/libbacktrace.la
+ LIBCTF now refers to ../libctf/libctf.la
+
+ NOTE1: The addition of libtool adds a few new configure-time options
+ to GDB. Among these, --enable-shared and --disable-shared, which were
+ previously ignored. Now GDB shall honor these options when linking,
+ picking up the right version of the referred libtool libraries
+ automagically.
+
+ NOTE2: I have not tested the insight build.
+
+ NOTE3: For regenerating configure I used an environment with Autoconf
+ 2.69 and Automake 1.15.1. This should match the previously
+ used version as announced in the configure script.
+
+ NOTE4: Now the installed shared objects libbfd.so, libopcodes.so and
+ libctf.so are used by gdb if binutils is installed with
+ --enable-shared.
+
+ Testing performed:
+
+ - --enable-shared and --disable-shared (the default in binutils) work
+ as expected: the linked executables link with the archive or shared
+ libraries transparently.
+
+ - Makefile.in modified for EXEEXT = .exe. It installs the binaries
+ just fine. The installed gdb.exe runs fine.
+
+ - Native build regtested in x86_64. No regressions found.
+
+ - Cross build for aarch64-linux-gnu built to exercise
+ program_transform_name and friends. The installed
+ aarch64-linux-gnu-gdb runs fine.
+
+ Bug: https://sourceware.org/bugzilla/show_bug.cgi?id=29372
+ Approved-By: Simon Marchi <simon.marchi@efficios.com>
+
+2022-11-07 Simon Marchi <simon.marchi@polymtl.ca>
+
+ gdb/testsuite: use a more unique name in gdb.mi/mi-breakpoint-multiple-locations.exp
+ I see failures in this test, due to the function name "add" being too
+ generic, and unexpected breakpoint locations being found in my
+ libstdc++, such as (wrapped for readability):
+
+ {
+ number="2.4",enabled="y",addr="0x00007ffff7d67e68",
+ func="(anonymous namespace)::fast_float::bigint::add",
+ file="/usr/src/debug/gcc/libstdc++-v3/src/c++17/fast_float/fast_float.h",
+ fullname="/usr/src/debug/gcc/libstdc++-v3/src/c++17/fast_float/fast_float.h",
+ line="1815", thread-groups=["i1"]
+ }
+
+ Change the test to use a more unique name.
+
+ Change-Id: I91de781be62d246eb41c73eaa410ebdd12633d1d
+
+2022-11-07 Pedro Alves <pedro@palves.net>
+
+ Don't explicitly set clone child ptrace options
+ linux_handle_extended_wait calls target_post_attach if we're handling
+ a PTRACE_EVENT_CLONE, and libthread_db.so isn't active.
+ target_post_attach just calls linux_init_ptrace_procfs to set the
+ lwp's ptrace options. However, this is completely unnecessary,
+ because, as man ptrace [1] says, options are inherited:
+
+ "Flags are inherited by new tracees created and "auto-attached" via
+ active PTRACE_O_TRACEFORK, PTRACE_O_TRACEVFORK, or PTRACE_O_TRACECLONE
+ options."
+
+ This removes the unnecessary call.
+
+ [1] - https://man7.org/linux/man-pages/man2/ptrace.2.html
+
+ Approved-By: Simon Marchi <simon.marchi@efficios.com>
+ Change-Id: I533eaa60b700f7e40760311fc0d344d0b3f19a78
+
+2022-11-07 Mike Frysinger <vapier@gentoo.org>
+
+ sim: .gdbinit: generate for all arch subdirs
+ This was being skipped for ports that had a recursive configure,
+ but we want it for them too.
+
+ sim: build: add a proper var for enabled arches
+ The install code was using $SUBDIRS to track all enabled arches. This
+ works, but isn't great if we want to add a subdir that isn't an arch
+ port, or as we merge the subdirs into the top-level. Create a new var
+ explicitly to track the list of enabled arches instead.
+
+2022-11-07 Christophe Lyon <christophe.lyon@arm.com>
+
+ configure: require libzstd >= 1.4.0
+ gas uses ZSTD_compressStream2 which is only available with libzstd >=
+ 1.4.0, leading to build errors when an older version is installed.
+
+ This patch updates the check libzstd presence to check its version is
+ >= 1.4.0. However, since gas seems to be the only component requiring
+ such a recent version this may imply that we disable ZSTD support for
+ all components although some would still benefit from an older
+ version.
+
+ I ran 'autoreconf -f' in all directories containing a configure.ac
+ file, using vanilla autoconf-2.69 and automake-1.15.1. I noticed
+ several errors from autoheader in readline, as well as warnings in
+ intl, but they are unrelated to this patch.
+
+ This should fix some of the buildbots.
+
+ OK for trunk?
+
+ Thanks,
+
+ Christophe
+
+2022-11-07 Clément Chigot <chigot@adacore.com>
+
+ ld/testsuite: skip tests related to -shared when disabled
+ Call the helper function "check_shared_lib_support" to ensure -shared
+ is enabled before launching ld-shared, ld-elfweak and ld-elfvers.
+ This allows to catch custom targets explicitly disabling it.
+
+ ld/ChangeLog:
+
+ * testsuite/ld-elfvers/vers.exp: Call check_shared_lib_support.
+ * testsuite/ld-elfweak/elfweak.exp: Likewise.
+ * testsuite/ld-shared/shared.exp: Likewise.
+
+2022-11-07 Tsukasa OI <research_trasio@irq.a4lg.com>
+
+ RISC-V: Remove RV32EF conflict
+ Despite that the RISC-V ISA Manual version 2.2 prohibited "RV32EF", later
+ versions beginning with the version 20190608-Base-Ratified removed this
+ restriction. Because the 'E' extension is still a draft, the author chose
+ to *just* remove the conflict (not checking the ISA version).
+
+ Note that, because RV32E is only used with a soft-float calling convention,
+ there's no valid official ABI for RV32EF. It means, even if we can assemble
+ a program with -march=rv32ef -mabi=ilp32e, floating-point registers are kept
+ in an unmanaged state (outside ABI management).
+
+ The purpose of this commit is to suppress unnecessary errors while parsing
+ an ISA string and/or disassembling, not to allow hard-float with RVE.
+
+ bfd/ChangeLog:
+
+ * elfxx-riscv.c (riscv_parse_check_conflicts): Accept RV32EF
+ because only older specifications disallowed it.
+
+ gas/ChangeLog:
+
+ * testsuite/gas/riscv/march-fail-rv32ef.d: Remove as not directly
+ prohibited.
+ * testsuite/gas/riscv/march-fail-rv32ef.l: Likewise.
+
+2022-11-07 GDB Administrator <gdbadmin@sourceware.org>
+
+ Automatic date update in version.in
+
+2022-11-06 Mike Frysinger <vapier@gentoo.org>
+
+ sim: build: respect AM_MAKEFLAGS when entering subdirs
+ This doesn't matter right now, but it will as we add more flags to
+ the recursive make step to pass state down.
+
+ sim: build: stop passing down SIM_PRIMARY_TARGET
+ This was needed when the install step was run in subdirs, but now
+ that we process that entirely in the top-level, we don't need to
+ pass this down, so drop it.
+
+2022-11-06 GDB Administrator <gdbadmin@sourceware.org>
+
+ Automatic date update in version.in
+
+2022-11-05 Tom Tromey <tom@tromey.com>
+
+ Deprecate MI version 1
+ MI version 1 is long since obsolete. Rather than remove it
+ immediately (though I did send a patch for that), instead let's
+ deprecate it in GDB 13 and then remove it for GDB 14.
+
+ This version of the patch incorporates Simon's warning change, and
+ Luis' recommendation to mention the gdb versions here.
+
+2022-11-05 Mike Frysinger <vapier@gentoo.org>
+
+ sim: fix readline linkage
+ Now that we link programs in the top dir instead of the arch subdir,
+ update the readline library path to be relative to the top dir.
+
+ sim: use libtool to install programs
+ Now that we use libtool to link, we have to use it to install instead
+ of keeping the manual logic so we don't install wrapper shell scripts.
+
+ sim: bfin: move linux-fixed-code.h to top-level
+
+2022-11-05 Mike Frysinger <vapier@gentoo.org>
+
+ sim: run: move linking into top-level
+ Automake will run each subdir individually before moving on to the next
+ one. This means that the linking phase, a single threaded process, will
+ not run in parallel with anything else. When we have to link ~32 ports,
+ that's 32 link steps that don't take advantage of parallel systems. On
+ my really old 4-core system, this cuts a multi-target build from ~60 sec
+ to ~30 sec. We eventually want to move all compile+link steps to this
+ common dir anyways, so might as well move linking now for a nice speedup.
+
+ We use noinst_PROGRAMS instead of bin_PROGRAMS because we're taking care
+ of the install ourselves rather than letting automake process it.
+
+2022-11-05 Mike Frysinger <vapier@gentoo.org>
+
+ sim: build: add uninstall support
+ This never worked before, but adding it to the common top-level dir
+ is pretty easy to do now that we're unified.
+
+ sim: build: move install steps to the top-level
+ We still have to maintain custom install rules due to how we rename
+ arch-specific files with an arch prefix in their name, but we can at
+ least unify the logic in the common dir.
+
+ sim: cris: move rvdummy linking to top-level
+ This is only used by `make check`, so we can move it out of the
+ default build too.
+
+ sim: build: add SIM_HW_CFLAGS to top-level build too
+ This matches what we do with targets already.
+
+ sim: drop unused SIM_HARDWARE variable
+ This hasn't been used since the refactor way back in commit
+ f872d0d643968c1101bb8c07b252edd54f626da2 ("Only enable H/W
+ on some mips targets."), so punt it.
+
+ sim: adjust sim_hw options style
+ We use uppercase for other variables, and are already turning it to
+ uppercase in the arch-subdir.mk, so convert it in the configure step.
+
+ sim: ppc: drop unused /dev/zero logic
+ Nothing in the tree checks this option, or has checked for decades.
+ The pre-cvs-import ChangeLog suggests this was added & removed back
+ then, but can't be sure as that history doesn't exist in the VCS.
+
+ sim: ppc: delete unused host bitsize settings
+ Nothing checks this define anywhere, so drop all the logic. We don't
+ want this to be a configure option in the first place as all such usage
+ should be automatic & following proper types.
+
+ sim: ppc: inline the sim-packages option
+ This has only ever had a single option that's enabled by default.
+ The objects it adds are pretty small and don't add overhead at
+ runtime if it isn't used, so just enable it all the time to make
+ the build code simpler.
+
+2022-11-05 GDB Administrator <gdbadmin@sourceware.org>
+
+ Automatic date update in version.in
+
+2022-11-04 H.J. Lu <hjl.tools@gmail.com>
+
+ binutils: Run PR binutils/26160 test
+ Update expected PR binutils/26160 test output for readelf out change
+ and run PR binutils/26160 test.
+
+ PR binutils/26160
+ * testsuite/binutils-all/pr26160.r: Updated.
+ * testsuite/binutils-all/readelf.exp: Run PR binutils/26160 test.
+
+2022-11-04 Lancelot SIX <lancelot.six@amd.com>
+
+ [testsuite] gdb.base/dlmopen: Fix test name and use gdb_attach
+ One test name in gdb.base/dlmopen.exp changes from run to run
+ since it includes a process id:
+
+ PASS: gdb.base/dlmopen.exp: attach 3442682
+
+ This is not convenient do diff gdb.sum files to compare test runs.
+
+ Fix by using gdb_attach helper function to handle attaching to the
+ process as it produce a constant test name.
+
+ While at it also check gdb_attach's return value to only run the
+ rest of the test if the attach was successful.
+
+ Approved-By: Simon Marchi <simon.marchi@efficios.com>
+
+2022-11-04 Carl Love <cel@us.ibm.com>
+
+ PowerPC update comments for the MMA instruction name changes.
+ The mnemonics for the pmxvf16ger*, pmxvf32ger*,pmxvf64ger*, pmxvi4ger8*,
+ pmxvi8ger4*, and pmxvi16ger2* instructions were officially changed to
+ pmdmxbf16ger*, pmdmxvf32ger*, pmdmxvf64ger*, pmdmxvi4ger8*, pmdmxvi8ger4*,
+ pmdmxvi16ger* respectively. The old mnemonics are still supported by the
+ assembler as extended mnemonics. The disassembler generates the new
+ mnemonics. The name changes occurred in commit:
+
+ commit bb98553cad4e017f1851153fa5de91f2cee98fb2
+ Author: Peter Bergner <bergner@linux.ibm.com>
+ Date: Sat Oct 8 16:19:51 2022 -0500
+
+ PowerPC: Add support for RFC02658 - MMA+ Outer-Product Instructions
+
+ gas/
+ * config/tc-ppc.c (md_assemble): Only check for prefix opcodes.
+ * testsuite/gas/ppc/rfc02658.s: New test.
+ * testsuite/gas/ppc/rfc02658.d: Likewise.
+ * testsuite/gas/ppc/ppc.exp: Run it.
+
+ opcodes/
+ * ppc-opc.c (XMSK8, P_GERX4_MASK, P_GERX2_MASK, XX3GERX_MASK): New.
+ (powerpc_opcodes): Add dmxvi8gerx4pp, dmxvi8gerx4, dmxvf16gerx2pp,
+ dmxvf16gerx2, dmxvbf16gerx2pp, dmxvf16gerx2np, dmxvbf16gerx2,
+ dmxvi8gerx4spp, dmxvbf16gerx2np, dmxvf16gerx2pn, dmxvbf16gerx2pn,
+ dmxvf16gerx2nn, dmxvbf16gerx2nn, pmdmxvi8gerx4pp, pmdmxvi8gerx4,
+ pmdmxvf16gerx2pp, pmdmxvf16gerx2, pmdmxvbf16gerx2pp, pmdmxvf16gerx2np,
+ pmdmxvbf16gerx2, pmdmxvi8gerx4spp, pmdmxvbf16gerx2np, pmdmxvf16gerx2pn,
+ pmdmxvbf16gerx2pn, pmdmxvf16gerx2nn, pmdmxvbf16gerx2nn.
+
+ This patch updates the comments in the various gdb files to reflect the
+ name changes. There are no functional changes made by this patch.
+
+ The older instruction names are still used in the test
+ gdb.reverse/ppc_record_test_isa_3_1.exp for backwards compatibility.
+
+ Patch has been tested on Power 10 with no regressions.
+
+2022-11-04 Carl Love <cel@us.ibm.com>
+
+ PowerPC fix for the gdb.arch/powerpc-power10.exp test.
+ The mnemonics for the pmxvf16ger*, pmxvf32ger*,pmxvf64ger*, pmxvi4ger8*,
+ pmxvi8ger4*, pmxvi16ger2* instructions were officially changed to
+ pmdmxvf16ger*, pmdmxvf32ger*, pmdmxvf64ger*, pmdmxvi4ger8*, pmdmxvi8ger4*,
+ pmdmxvi16ger* respectively. The old mnemonics are still supported by the
+ assembler as extended mnemonics. The disassembler generates the new
+ mnemonics. The name changes occurred in commit:
+
+ commit bb98553cad4e017f1851153fa5de91f2cee98fb2
+ Author: Peter Bergner <bergner@linux.ibm.com>
+ Date: Sat Oct 8 16:19:51 2022 -0500
+
+ PowerPC: Add support for RFC02658 - MMA+ Outer-Product Instructions
+
+ gas/
+ * config/tc-ppc.c (md_assemble): Only check for prefix opcodes.
+ * testsuite/gas/ppc/rfc02658.s: New test.
+ * testsuite/gas/ppc/rfc02658.d: Likewise.
+ * testsuite/gas/ppc/ppc.exp: Run it.
+
+ opcodes/
+ * ppc-opc.c (XMSK8, P_GERX4_MASK, P_GERX2_MASK, XX3GERX_MASK): New.
+ (powerpc_opcodes): Add dmxvi8gerx4pp, dmxvi8gerx4, dmxvf16gerx2pp,
+ dmxvf16gerx2, dmxvbf16gerx2pp, dmxvf16gerx2np, dmxvbf16gerx2,
+ dmxvi8gerx4spp, dmxvbf16gerx2np, dmxvf16gerx2pn, dmxvbf16gerx2pn,
+ dmxvf16gerx2nn, dmxvbf16gerx2nn, pmdmxvi8gerx4pp, pmdmxvi8gerx4,
+ pmdmxvf16gerx2pp, pmdmxvf16gerx2, pmdmxvbf16gerx2pp, pmdmxvf16gerx2np,
+ pmdmxvbf16gerx2, pmdmxvi8gerx4spp, pmdmxvbf16gerx2np, pmdmxvf16gerx2pn,
+ pmdmxvbf16gerx2pn, pmdmxvf16gerx2nn, pmdmxvbf16gerx2nn.
+
+ The above commit results in about 224 failures on Power 10 since the
+ disassembled names do not match the expected names in the test. This
+ patch updates the expected names in the test to match the values produced
+ by the disassembler.
+
+ This patch updates file gdb.arch/powerpc-power10.exp with the new expected
+ values to the instructions. The comment giving the name of the instruction
+ for each binary value in the file gdb.arch/powerpc-power10.c is updated
+ with the new name. There are no functional changes in file
+ gdb.arch/powerpc-power10.c.
+
+2022-11-04 Carl Love <cel@us.ibm.com>
+
+ Powerpc fix for gdb.base/unwind-on-each-insn.exp
+ The test disassembles function foo and searches for the line
+ "End of assembler dump" to determing the last address in the function. The
+ assumption is the last instruction will be given right before the line
+ "End of assembler dump". This assumption fails on PowerPC.
+
+ The PowerPC disassembly of the function foo looks like:
+ Dump of assembler code for function foo:
+ # => 0x00000000100006dc <+0>: std r31,-8(r1)
+ # 0x00000000100006e0 <+4>: stdu r1,-48(r1)
+ # 0x00000000100006e4 <+8>: mr r31,r1
+ # 0x00000000100006e8 <+12>: nop
+ # 0x00000000100006ec <+16>: addi r1,r31,48
+ # 0x00000000100006f0 <+20>: ld r31,-8(r1)
+ # 0x00000000100006f4 <+24>: blr
+ # 0x00000000100006f8 <+28>: .long 0x0
+ # 0x00000000100006fc <+32>: .long 0x0
+ # 0x0000000010000700 <+36>: .long 0x1000180
+ # End of assembler dump.
+
+ The blr instruction is the last instruction in function foo. The lines
+ with .long following the blr instruction need to be ignored.
+
+ This patch adds a new condition to the gdb_test_multiple "disassemble foo"
+ test to ignore the lines with the .long.
+
+ The patch has been tested on PowerPC and Intel X86-64.
+
+2022-11-04 Jan Beulich <jbeulich@suse.com>
+
+ x86: adjust recently introduced testcases
+ The issue addressed by 2c02c72c62d2 ("re: Support Intel AMX-FP16") has
+ been introduced once again in a number of new tests.
+
+2022-11-04 Nick Clifton <nickc@redhat.com>
+
+ Update release documentation with regard to uploading gprofng docs
+
+2022-11-04 Bruno Larsen <blarsen@redhat.com>
+
+ gdb/testsuite: add KFAILs to gdb.reverse/step-reverse.exp
+ Recent changes to gdb.reverse/step-reverse.exp revealed the latent bug
+ PR record/29745, where we can't skip one funcion forward if we're using
+ native-gdbserver. This commit just adds kfails to the test.
+
+ Bug: https://sourceware.org/bugzilla/show_bug.cgi?id=29745
+ Approved-By: Simon Marchi <simon.marchi@efficios.com>
+
+2022-11-04 Andrew Burgess <aburgess@redhat.com>
+
+ opcodes/arm: silence compiler warning about uninitialized variable use
+ After this commit:
+
+ commit 6576bffe6cbbb53c5756b2fccd2593ba69b74cdf
+ Date: Thu Jul 7 13:43:45 2022 +0100
+
+ opcodes/arm: add disassembler styling for arm
+
+ Some people were seeing their builds failing with complaints about a
+ possible uninitialized variable usage. I previously fixed an instance
+ of this issue in this commit:
+
+ commit 2df82cd4b459fbc32120e0ad1ce19e26349506fe
+ Date: Tue Nov 1 10:36:59 2022 +0000
+
+ opcodes/arm: silence compiler warning about uninitialized variable use
+
+ which did fix the build problems that the sourceware buildbot was
+ hitting, however, an additional instance of the same problem was
+ brought to my attention, and that is fixed in this commit.
+
+ Where commit 2df82cd4b4 fixed the uninitialized variable problem in
+ print_mve_unpredictable, this commit fixes the same problem in
+ print_mve_undefined.
+
+ As with the previous commit, I don't believe we could really ever get
+ an uninitialized variable usage, based on the current usage of the
+ function, so I have just initialized the reason variable to "??".
+
+2022-11-04 Mike Frysinger <vapier@gentoo.org>
+
+ sim: rx: drop unused $arch setting
+ This is only needed for CGEN ports which RX isn't, so drop it.
+
+2022-11-04 Mike Frysinger <vapier@gentoo.org>
+
+ sim: build: remove various obsolete generation dep variables
+ These manual settings were necessary when we weren't doing automatic
+ header dependency tracking. That was changed a while ago, and we use
+ automake now to do it all for us. As a result, many of these vars
+ aren't even referenced anymore.
+
+ Further, some of the source file generation (e.g. .c files, or igen,
+ or cgen outputs) were moved to the common automake build, and it takes
+ care of dependency tracking for us with the object files.
+
+2022-11-04 Mike Frysinger <vapier@gentoo.org>
+
+ sim: don't hardcode -ldl for SDL support
+ Since we use AC_SEARCH_LIBS to find dlopen, we don't need to hardcode
+ -ldl when using SDL ourselves.
+
+2022-11-04 konglin1 <lingling.kong@intel.com>
+
+ Support Intel AVX-NE-CONVERT
+ gas/ChangeLog:
+
+ * NEWS: Support Intel AVX-NE-CONVERT.
+ * config/tc-i386.c: Add avx_ne_convert.
+ * doc/c-i386.texi: Document .avx_ne_convert.
+ * testsuite/gas/i386/i386.exp: Run AVX NE CONVERT tests.
+ * testsuite/gas/i386/avx-ne-convert-intel.d: New test.
+ * testsuite/gas/i386/avx-ne-convert.d: Ditto.
+ * testsuite/gas/i386/avx-ne-convert.s: Ditto.
+ * testsuite/gas/i386/x86-64-avx-ne-convert-intel.d: Ditto.
+ * testsuite/gas/i386/x86-64-avx-ne-convert.d: Ditto.
+ * testsuite/gas/i386/x86-64-avx-ne-convert.s: Ditto.
+
+ opcodes/ChangeLog:
+
+ * i386-dis.c (Mw): New.
+ (PREFIX_VEX_0F3872): Ditto.
+ (PREFIX_VEX_0F38B0_W_0): Ditto.
+ (PREFIX_VEX_0F38B1_W_0): Ditto.
+ (VEX_W_0F3872_P_1): Ditto.
+ (VEX_W_0F38B0): Ditto.
+ (VEX_W_0F38B1): Ditto.
+ (prefix_table): Add PREFIX_VEX_0F3872, PREFIX_VEX_0F38B0_W_0,
+ PREFIX_VEX_0F38B1_W_0.
+ (vex_w_table): Add VEX_W_0F3872_P_1, VEX_W_0F38B0, VEX_W_0F38B1.
+ * i386-gen.c (cpu_flag_init): Add CPU_AVX_NE_CONVERT_FLGAS and
+ CPU_ANY_AVX_NE_CONVERT_FLAGS.
+ (cpu_flags): Add CpuAVX_NE_CONVERT.
+ * i386-init.h: Regenerated.
+ * i386-opc.h (CpuAVX_NE CONVERT): New.
+ (i386_cpu_flags): Add cpuavx_ne_convert.
+ * i386-opc.tbl: Add Intel AVX-NE-CONVERT instructions.
+ * i386-tbl.h: Regenerated.
+
+2022-11-04 konglin1 <lingling.kong@intel.com>
+
+ i386: Rename <xy> template.
+ opcodes/
+ * i386-opc.tbl: Rename <xy> template for VEX insn with x/y suffix to <Vxy>.
+ Rename <xy> for EVEX insn with x/y suffix to <Exy>.
+
+2022-11-04 Jojo R <rjiejie@linux.alibaba.com>
+
+ Support multiple .eh_frame sections
+ This patch is based on MULTIPLE_FRAME_SECTIONS and EH_FRAME_LINKONCE,
+ it allows backend to enable this feature and use '--gc-sections' simply.
+
+ * gas/dw2gencfi.h (TARGET_MULTIPLE_EH_FRAME_SECTIONS): New.
+ (MULTIPLE_FRAME_SECTIONS): Add TARGET_MULTIPLE_EH_FRAME_SECTIONS.
+ * gas/dw2gencfi.c (EH_FRAME_LINKONCE): Add TARGET_MULTIPLE_EH_FRAME_SECTIONS.
+ (is_now_linkonce_segment): Likewise.
+ (get_cfi_seg): Create relocation info between .eh_frame.* and .text.* section.
+
+ * bfd/elf-bfd.h (elf_backend_can_make_multiple_eh_frame): New.
+ * bfd/elfxx-target.h (elf_backend_can_make_multiple_eh_frame): Likewise.
+ * bfd/elflink.c (_bfd_elf_default_action_discarded): Add checking for
+ elf_backend_can_make_multiple_eh_frame.
+
+2022-11-04 Jojo R <rjiejie@linux.alibaba.com>
+
+ gas/doc/internals.texi: fix typo
+ * gas/doc/internals.texi (md_emit_single_noop_insn):
+ fix '@var missing closing brace'
+ * gas/doc/internals.texi (Hash tables):
+ fix '@menu reference to nonexistent node `Hash tables''
+
+2022-11-04 Mike Frysinger <vapier@gentoo.org>
+
+ sim: drop -lm from SIM_EXTRA_LIBS
+ We have configure tests for this in the top-level configure script
+ to link this when necessary, so we don't need to explicitly list it
+ for specific ports.
+
+ sim: build: change AC_CHECK_LIB to AC_SEARCH_LIBS
+ With more C libraries moving functions entirely into the main -lc,
+ change the AC_CHECK_LIB calls to AC_SEARCH_LIBS so we look in there
+ first and avoid extra linkage when possible.
+
+ sim: build: drop duplicate $(LIBS) usage
+ COMMON_LIBS is set to $(LIBS), and CONFIG_LIBS is set to that plus
+ @LIBS@. This leds to the values being used twice. Inline the
+ CONFIG_LIBS variable without @LIBS@ since it's used only once.
+
+ sim: build: switch to bfd & opcodes libtool linker scripts
+ Now that we use libtool to link, we don't need to duplicate all the
+ libs that bfd itself uses. This simplifies the configure & Makefile.
+
+ sim: build: switch to libtool for linking
+ The top-level already sets up a libtool script for the host, so use
+ that when linking rather than invoking CC directly. This will also
+ happen when we (someday) move the building to pure automake.
+
+2022-11-04 GDB Administrator <gdbadmin@sourceware.org>
+
+ Automatic date update in version.in
+
+2022-11-03 Mike Frysinger <vapier@gentoo.org>
+
+ sim: testsuite: fix cris stat3 in diff setups
+ This test uses the test itself as an input to stating regular files.
+ This gets funky though: when we run check in parallel, the output
+ object dir is the subdir that matches the .exp file. When we run
+ with -j1, the output object dir is the sim builddir itself.
+
+ The old test would append argv[0] to find the file, while the new
+ test uses basename on it. Each method works in only one of the
+ aforementioned build scenarios. Rather than complicate this any
+ more, switch to a different file that we know will always exist:
+ the Makefile.
+
+2022-11-03 Mike Frysinger <vapier@gentoo.org>
+
+ sim: testsuite: fix cris badarch in multi-target builds
+ This test assumes that /bin/sh will never be a CRIS ELF by way of
+ assuming that the current bfd cannot load it (since a basic cris
+ cross-compiler only understands CRIS ELFs). In a multi-target
+ build though, bfd understands just about every ELF out there, so
+ we're able to read the /bin/sh format before failing at a diff
+ point in the cris code.
+
+ Let's switch to using / instead since it'll fail for a similar
+ reason (at least similar enough for what this test is testing).
+
+2022-11-03 Mike Frysinger <vapier@gentoo.org>
+
+ sim: cleanup unused SIM_EXTRA_CFLAGS
+ We want to eventually delete this, so at least drop the empty ones.
+
+ sim: m32c/rx: drop useless $(ENDLIST)
+ This is used to allow for dangling \ in object lists, but these are the
+ only ports that do it, and it isn't really necessary. Punt it to keep
+ the various makefiles harmonized.
+
+ sim: mips: simplify fpu configure logic
+ The configure code always defaults to HARD_FLOATING_POINT, so inline
+ that value and drop redundant target checks as a result.
+
+2022-11-03 Mike Frysinger <vapier@gentoo.org>
+
+ sim: erc32: link sis to run program
+ The erc32 sim does a lot itself, including handling of the CLI. It
+ used to provide a run-compatible interface in the pre-nrun days, but
+ it was dropped when the old run interface was punted. Since the old
+ commit 465fb143c87076b6416a8d0d5dd79bb016060fe3 ("sim: make nrun the
+ default run program"), the erc32 run & sis programs have been the
+ same, and erc32 hasn't provide a real run-compatible interface.
+
+ Simplify this by linking the two programs via ln/cp instead of running
+ the linking phase twice to produce the same result. If/when we fix up
+ the erc32 port to have a proper run interface, it should be easy to
+ split these back apart into real programs.
+
+ Note: the interf.o reference in here is a bit of a misdirect. Since
+ that object is placed into libsim.a, it's never been linked into the
+ programs since the linker ignores objects that aren't referenced, and
+ only gdb uses those symbols.
+
+2022-11-03 Nick Clifton <nickc@redhat.com>
+
+ V850 Linker: do not complain about RWX segments.
+ PR 29748
+ * configure.tgt (ac_default_ld_warn_rwx_segments): Set to 0 for
+ the V850.
+
+2022-11-03 Mike Frysinger <vapier@gentoo.org>
+
+ sim: v850: switch to standard (high-level) trace defines
+ The v850 port uses -DDEBUG to control whether to enable internal tracing.
+ We already have such options via the common trace framework, and those
+ can be controlled at build time via configure flags (which the v850 code
+ currently cannot). So switch it over to WITH_TRACE_ANY_P to simplify the
+ v850 build code even if it doesn't (yet) respect any other trace options.
+
+ sim: ppc: include copyright & license in --version
+ This makes it match the other sim run programs and GNU tools.
+
+ sim: update --version copyright year
+ Probably should have done this 11 months ago ...
+
+ sim: ppc: drop use of DATE & TIME
+ No other tool does this, sim or otherwise, and it makes the ppc build
+ non-reproducible. Drop it to simplify & make reproducible.
+
+2022-11-03 Bruno Larsen <blarsen@redhat.com>
+
+ gdb: Fix issue with Clang CLI macros
+ Clang up to version 15 (current) adds macros that were defined in the
+ command line or by "other means", according to the Dwarf specification,
+ after the last DW_MACRO_end_file, instead of before the first
+ DW_MACRO_start_file, as the specification dictates. When GDB reads the
+ macros after the last file is closed, the macros never end up "in scope"
+ and so we can't print them. This has been submitted as a bug to Clang
+ developers (https://github.com/llvm/llvm-project/issues/54506), and PR
+ macros/29034 was opened for GDB to keep track of this.
+
+ Seeing as there is no expected date for it to be fixed, add a workaround
+ for all current versions of Clang. The workaround detects when
+ the main file would be closed and if the producer is Clang, and turns
+ that operation into a noop, so we keep a reference to the current_file
+ as those macros are read.
+
+ A test case was added to confirm the functionality, and the KFAIL for
+ running gdb.base/macro-source-path when using clang.
+
+ Bug: https://sourceware.org/bugzilla/show_bug.cgi?id=29034
+ Approved-By: Simon Marchi <simon.marchi@efficios.com>
+
+2022-11-03 Nick Clifton <nickc@redhat.com>
+
+ AVR Linker: Allow the start of the data region to be specified on the linker command line. [Fix PR number in ChangeLog entry]
+ PR 29741
+ * scripttempl/avr.sc (__DATA_REGION_ORIGIN__): Define. If a value
+ has not been provided on the command line then use DATA_ORIGIN.
+ (MEMORY): Use __DATA_REGION_ORIGIN__ as the start of the data region.
+
+ AVR Linker: Allow the start of the data region to specified on the command line.
+ PR 29471
+ * scripttempl/avr.sc (__DATA_REGION_ORIGIN__): Define. If a value
+ has not been provided on the command line then use DATA_ORIGIN.
+ (MEMORY): Use __DATA_REGION_ORIGIN__ as the start of the data region.
+
+2022-11-03 Mike Frysinger <vapier@gentoo.org>
+
+ sim: move common flags to default AM_CPPFLAGS
+ Since all host files we compile use these settings, move them out of
+ libcommon.a and into the default AM_CPPFLAGS. This has the effect of
+ dropping the custom per-target automake rules. Currently it saves us
+ ~150 lines, but since it's about ~8 lines per object, the overhead
+ will increase quite a bit as we merge more files into a single build.
+
+ This also changes the object output names, so we have to tweak the
+ rules that were pulling in the common objects when linking.
+
+2022-11-03 Mike Frysinger <vapier@gentoo.org>
+
+ sim: merge gnulib logic into the top-level
+ We aren't using this just yet, but we will, so make it available to
+ building of common sim files.
+
+ sim: common: remove unused include paths
+ A bunch of these paths don't include any headers, and most likely
+ never will, so there's no real need to keep them. This will let
+ us harmonize paths with the top-level Makefile more easily, which
+ will in turn make it easier to move more compile steps there.
+
+2022-11-03 GDB Administrator <gdbadmin@sourceware.org>
+
+ Automatic date update in version.in
+
+2022-11-02 Christophe Lyon <christophe.lyon@arm.com>
+
+ arm: PR 29739 Fix typo where ';' should not have been replaced with '@'
+ ';' does not always indicate the start of a comment, and commit
+ 8cb6e17571f3fb66ccd4fa19f881602542cd06fc incorrectly replaced 3
+ instances of ';' with '@' in expected diagnostics, leading to tests
+ failures.
+
+ This patch restores the original ';' as needed in these testcases.
+
+ Fixes bug: https://sourceware.org/bugzilla/show_bug.cgi?id=29739
+
+2022-11-02 Mike Frysinger <vapier@gentoo.org>
+
+ sim: split CPPFLAGS between build & host
+ In order to merge more common/ files into the top-level, we need to
+ add more host flags to CPPFLAGS, and that conflicts with our current
+ use with build-time tools. So split them apart like we do with all
+ other build flags to avoid the issue.
+
+ sim: h8300: switch to cpu for state
+ Rather than rely on pulling out the first cpu from the sim state
+ for cpu state, pass down the active cpu that's already available.
+
+ sim: common: change sim_{fetch,store}_register helpers to use void* buffers
+ When reading/writing arbitrary data to the system's memory, the unsigned
+ char pointer type doesn't make that much sense. Switch it to void so we
+ align a bit with standard C library read/write functions, and to avoid
+ having to sprinkle casts everywhere.
+
+2022-11-02 Jon Turney <jon.turney@dronecode.org.uk>
+
+ Fix Cygwin build after 20489cca
+ Update code under __CYGWIN__ which accesses inferior process information
+ which is now stored in windows_process_info rather than globals.
+
+2022-11-02 Jon Turney <jon.turney@dronecode.org.uk>
+
+ Fix Cygwin build after bcb9251f
+ Absent _UNICODE being defined (which gdb's Makefile doesn't do),
+ windows.h will always define STARTUPINFO is as STARTUPINFOA, so this
+ cast isn't correct when create_process expects a STARTUPINFOW
+ parameter (i.e. in a Cygwin build).
+
+ Instead write this as &info_ex.StartupInfo (which is always of the
+ correct type).
+
+2022-11-02 Jan Beulich <jbeulich@suse.com>
+
+ x86: drop bogus Tbyte
+ Prior to commit 1cb0ab18ad24 ("x86/Intel: restrict suffix derivation")
+ the Tbyte modifier on the FLDT and FSTPT templates was pointless, as
+ No_ldSuf would have prevented it being accepted. Due to the special
+ nature of LONG_DOUBLE_MNEM_SUFFIX said commit, however, has led to these
+ insns being accepted in Intel syntax mode even when "tbyte ptr" was
+ present. Restore original behavior by dropping Tbyte there. (Note that
+ these insns in principle should by marked AT&T syntax only, but since
+ they haven't been so far we probably shouldn't change that.)
+
+ x86: simplify expressions in update_imm()
+ Comparing the sum of the relevant .imm<N> fields against a constant imo
+ makes more obvious what is actually meant. It allows dropping of two
+ static variables, with a 3rd drop requiring two more minor adjustments
+ elsewhere, utilizing that "i" is zeroed first thing in md_assemble().
+ This also increases the chances of the compiler doing the calculations
+ all in registers.
+
+2022-11-02 Nelson Chu <nelson@rivosinc.com>
+
+ RISC-V: Fixed the missing $x+arch when adding odd paddings for alignment.
+ Consider the case,
+
+ .option arch, rv32i
+ .option norelax
+ .option arch, +c
+ .byte 1
+ .align 2
+ addi a0, zero, 1
+
+ Assembler adds $d for the odd .byte, and then adds $x+arch for the
+ alignment. Since norelax, riscv_add_odd_padding_symbol will add the
+ $d and $x for the odd alignment, but accidently remove the $x+arch because
+ it has the same address as $d. Therefore, we will get the unexpected result
+ before applying this patch,
+
+ .byte 1 # $d
+ .align 2 # odd alignment, $xrv32ic replaced by $d + $x
+
+ After this patch, the expected result should be,
+
+ .byte 1 # $d
+ .align 2 # odd alignment, $xrv32ic replaced by $d + $xrv32ic
+
+ gas/
+ * config/tc-riscv.c (make_mapping_symbol): If we are adding mapping symbol
+ for odd alignment, then we probably will remove the $x+arch by accidently
+ when it has the same address of $d. Try to add the removed $x+arch back
+ after the $d rather than just $x.
+ (riscv_mapping_state): Updated since parameters of make_mapping_symbol are
+ changed.
+ (riscv_add_odd_padding_symbol): Likewise.
+ (riscv_remove_mapping_symbol): Removed and moved the code into the
+ riscv_check_mapping_symbols.
+ (riscv_check_mapping_symbols): Updated.
+ * testsuite/gas/riscv/mapping-dis.d: Updated and added new testcase.
+ * testsuite/gas/riscv/mapping-symbols.d: Likewise.
+ * testsuite/gas/riscv/mapping.s: Likewise.
+
+2022-11-02 Hu, Lin1 <lin1.hu@intel.com>
+
+ Support Intel MSRLIST
+ gas/ChangeLog:
+
+ * NEWS: Support Intel MSRLIST.
+ * config/tc-i386.c: Add msrlist.
+ * doc/c-i386.texi: Document .msrlist.
+ * testsuite/gas/i386/i386.exp: Add MSRLIST tests.
+ * testsuite/gas/i386/msrlist-inval.l: New test.
+ * testsuite/gas/i386/msrlist-inval.s: Ditto.
+ * testsuite/gas/i386/x86-64-msrlist-intel.d: Ditto.
+ * testsuite/gas/i386/x86-64-msrlist.d: Ditto.
+ * testsuite/gas/i386/x86-64-msrlist.s: Ditto.
+
+ opcodes/ChangeLog:
+
+ * i386-dis.c (X86_64_0F01_REG_0_MOD_3_RM_6_P_1): New.
+ (X86_64_0F01_REG_0_MOD_3_RM_6_P_3): Ditto.
+ (prefix_table): New entry for msrlist.
+ (x86_64_table): Add X86_64_0F01_REG_0_MOD_3_RM_6_P_1
+ and X86_64_0F01_REG_0_MOD_3_RM_6_P_3.
+ * i386-gen.c (cpu_flag_init): Add CPU_MSRLIST_FLAGS
+ and CPU_ANY_MSRLIST_FLAGS.
+ * i386-init.h: Regenerated.
+ * i386-opc.h (CpuMSRLIST): New.
+ (i386_cpu_flags): Add cpumsrlist.
+ * i386-opc.tbl: Add MSRLIST instructions.
+ * i386-tbl.h: Regenerated.
+
+2022-11-02 Hu, Lin1 <lin1.hu@intel.com>
+
+ Support Intel WRMSRNS
+ gas/ChangeLog:
+
+ * NEWS: Support Intel WRMSRNS.
+ * config/tc-i386.c: Add wrmsrns.
+ * doc/c-i386.texi: Document .wrmsrns.
+ * testsuite/gas/i386/i386.exp: Add WRMSRNS tests.
+ * testsuite/gas/i386/wrmsrns-intel.d: New test.
+ * testsuite/gas/i386/wrmsrns.d: Ditto.
+ * testsuite/gas/i386/wrmsrns.s: Ditto.
+ * testsuite/gas/i386/x86-64-wrmsrns-intel.d: Ditto.
+ * testsuite/gas/i386/x86-64-wrmsrns.d: Ditto.
+
+ opcodes/ChangeLog:
+
+ * i386-dis.c (PREFIX_0F01_REG_0_MOD_3_RM_6): New.
+ (prefix_table): Add PREFIX_0F01_REG_0_MOD_3_RM_6.
+ (rm_table): New entry for wrmsrns.
+ * i386-gen.c (cpu_flag_init): Add CPU_WRMSRNS_FLAGS
+ and CPU_ANY_WRMSRNS_FLAGS.
+ (cpu_flags): Add CpuWRMSRNS.
+ * i386-init.h: Regenerated.
+ * i386-opc.h (CpuWRMSRNS): New.
+ (i386_cpu_flags): Add cpuwrmsrns.
+ * i386-opc.tbl: Add WRMSRNS instructions.
+ * i386-tbl.h: Regenerated.
+
+2022-11-02 Kong Lingling <lingling.kong@intel.com>
+
+ Add handler for more i386_cpu_flags
+ gas/ChangeLog:
+
+ * config/tc-i386.c (cpu_flags_all_zero): Add new ARRAY_SIZE handle.
+ (cpu_flags_equal): Ditto.
+ (cpu_flags_and): Ditto.
+ (cpu_flags_or): Ditto.
+ (cpu_flags_and_not): Ditto.
+
+2022-11-02 Haochen Jiang <haochen.jiang@intel.com>
+
+ Support Intel CMPccXADD
+ gas/ChangeLog:
+
+ * NEWS: Support Intel CMPccXADD.
+ * config/tc-i386.c: Add cmpccxadd.
+ (build_modrm_byte): Add operations for Vex.VVVV reg
+ on operand 0 while have memory operand.
+ * doc/c-i386.texi: Document .cmpccxadd.
+ * testsuite/gas/i386/i386.exp: Run CMPccXADD tests.
+ * testsuite/gas/i386/cmpccxadd-inval.s: New test.
+ * testsuite/gas/i386/cmpccxadd-inval.l: Ditto.
+ * testsuite/gas/i386/x86-64-cmpccxadd-intel.d: Ditto.
+ * testsuite/gas/i386/x86-64-cmpccxadd.s: Ditto.
+ * testsuite/gas/i386/x86-64-cmpccxadd.d: Ditto.
+
+ opcodes/ChangeLog:
+
+ * i386-dis.c (Mdq): New.
+ (X86_64_VEX_0F38E0): Ditto.
+ (X86_64_VEX_0F38E1): Ditto.
+ (X86_64_VEX_0F38E2): Ditto.
+ (X86_64_VEX_0F38E3): Ditto.
+ (X86_64_VEX_0F38E4): Ditto.
+ (X86_64_VEX_0F38E5): Ditto.
+ (X86_64_VEX_0F38E6): Ditto.
+ (X86_64_VEX_0F38E7): Ditto.
+ (X86_64_VEX_0F38E8): Ditto.
+ (X86_64_VEX_0F38E9): Ditto.
+ (X86_64_VEX_0F38EA): Ditto.
+ (X86_64_VEX_0F38EB): Ditto.
+ (X86_64_VEX_0F38EC): Ditto.
+ (X86_64_VEX_0F38ED): Ditto.
+ (X86_64_VEX_0F38EE): Ditto.
+ (X86_64_VEX_0F38EF): Ditto.
+ (x86_64_table): Add X86_64_VEX_0F38E0, X86_64_VEX_0F38E1,
+ X86_64_VEX_0F38E2, X86_64_VEX_0F38E3, X86_64_VEX_0F38E4,
+ X86_64_VEX_0F38E5, X86_64_VEX_0F38E6, X86_64_VEX_0F38E7,
+ X86_64_VEX_0F38E8, X86_64_VEX_0F38E9, X86_64_VEX_0F38EA,
+ X86_64_VEX_0F38EB, X86_64_VEX_0F38EC, X86_64_VEX_0F38ED,
+ X86_64_VEX_0F38EE, X86_64_VEX_0F38EF.
+ * i386-gen.c (cpu_flag_init): Add CPU_CMPCCXADD_FLAGS and
+ CPU_ANY_CMPCCXADD_FLAGS.
+ (cpu_flags): Add CpuCMPCCXADD.
+ * i386-init.h: Regenerated.
+ * i386-opc.h (CpuCMPCCXADD): New.
+ (i386_cpu_flags): Add cpucmpccxadd. Comment unused for it is actually 0.
+ * i386-opc.tbl: Add Intel CMPccXADD instructions.
+ * i386-tbl.h: Regenerated.
+
+2022-11-02 Cui,Lili <lili.cui@intel.com>
+
+ Support Intel AVX-VNNI-INT8
+ gas/
+ * NEWS: Support Intel AVX-VNNI-INT8.
+ * config/tc-i386.c: Add avx_vnni_int8.
+ * doc/c-i386.texi: Document avx_vnni_int8.
+ * testsuite/gas/i386/avx-vnni-int8-intel.d: New file.
+ * testsuite/gas/i386/avx-vnni-int8.d: Likewise.
+ * testsuite/gas/i386/avx-vnni-int8.s: Likewise.
+ * testsuite/gas/i386/x86-64-avx-vnni-int8-intel.d: Likewise.
+ * testsuite/gas/i386/x86-64-avx-vnni-int8.d: Likewise.
+ * testsuite/gas/i386/x86-64-avx-vnni-int8.s: Likewise.
+ * testsuite/gas/i386/i386.exp: Run AVX VNNI INT8 tests.
+
+ opcodes/
+ * i386-dis.c: (PREFIX_VEX_0F3850) New.
+ (PREFIX_VEX_0F3851): Likewise.
+ (VEX_W_0F3850_P_0): Likewise.
+ (VEX_W_0F3850_P_1): Likewise.
+ (VEX_W_0F3850_P_2): Likewise.
+ (VEX_W_0F3850_P_3): Likewise.
+ (VEX_W_0F3851_P_0): Likewise.
+ (VEX_W_0F3851_P_1): Likewise.
+ (VEX_W_0F3851_P_2): Likewise.
+ (VEX_W_0F3851_P_3): Likewise.
+ (VEX_W_0F3850): Delete.
+ (VEX_W_0F3851): Likewise.
+ (prefix_table): Add PREFIX_VEX_0F3850 and PREFIX_VEX_0F3851.
+ (vex_table): Add PREFIX_VEX_0F3850 and PREFIX_VEX_0F3851,
+ delete VEX_W_0F3850 and VEX_W_0F3851.
+ (vex_w_table): Add VEX_W_0F3850_P_0, VEX_W_0F3850_P_1, VEX_W_0F3850_P_2
+ VEX_W_0F3850_P_3, VEX_W_0F3851_P_0, VEX_W_0F3851_P_1, VEX_W_0F3851_P_2
+ and VEX_W_0F3851_P_3, delete VEX_W_0F3850 and VEX_W_0F3851.
+ * i386-gen.c: (cpu_flag_init): Add CPU_AVX_VNNI_INT8_FLAGS
+ and CPU_ANY_AVX_VNNI_INT8_FLAGS.
+ (cpu_flags): Add CpuAVX_VNNI_INT8.
+ * i386-opc.h (CpuAVX_VNNI_INT8): New.
+ * i386-opc.tbl: Add Intel AVX_VNNI_INT8 instructions.
+ * i386-init.h: Regenerated.
+ * i386-tbl.h: Likewise.
+
+2022-11-02 Hongyu Wang <hongyu.wang@intel.com>
+ Haochen Jiang <haochen.jiang@intel.com>
+
+ Support Intel AVX-IFMA
+ x86: Support Intel AVX-IFMA
+
+ Intel AVX IFMA instructions are marked with CpuVEX_PREFIX, which is
+ cleared by default. Without {vex} pseudo prefix, Intel IFMA instructions
+ are encoded with EVEX prefix. {vex} pseudo prefix will turn on VEX
+ encoding for Intel IFMA instructions.
+
+ gas/
+
+ * NEWS: Support Intel AVX-IFMA.
+ * config/tc-i386.c (cpu_arch): Add avx_ifma.
+ * doc/c-i386.texi: Document .avx_ifma.
+ * testsuite/gas/i386/avx-ifma.d: New file.
+ * testsuite/gas/i386/avx-ifma-intel.d: Likewise.
+ * testsuite/gas/i386/avx-ifma.s: Likewise.
+ * testsuite/gas/i386/x86-64-avx-ifma.d: Likewise.
+ * testsuite/gas/i386/x86-64-avx-ifma-intel.d: Likewise.
+ * testsuite/gas/i386/x86-64-avx-ifma.s: Likewise.
+ * testsuite/gas/i386/i386.exp: Run AVX IFMA tests.
+
+ opcodes/
+
+ * i386-dis.c (PREFIX_VEX_0F38B4): New.
+ (PREFIX_VEX_0F38B5): Likewise.
+ (VEX_W_0F38B4_P_2): Likewise.
+ (VEX_W_0F38B5_P_2): Likewise.
+ (prefix_table): Add PREFIX_VEX_0F38B4 and PREFIX_VEX_0F38B5.
+ (vex_table): Add VEX_W_0F38B4_P_2 and VEX_W_0F38B5_P_2.
+ * i386-dis-evex.h: Fold AVX512IFMA entries to AVX-IFMA.
+ * i386-gen.c (cpu_flag_init): Clear the CpuAVX_IFMA bit in
+ CPU_UNKNOWN_FLAGS. Add CPU_AVX_IFMA_FLGAS and
+ CPU_ANY_AVX_IFMA_FLAGS. Add CpuAVX_IFMA to CPU_AVX2_FLAGS.
+ (cpu_flags): Add CpuAVX_IFMA.
+ * i386-opc.h (CpuAVX_IFMA): New.
+ (i386_cpu_flags): Add cpuavx_ifma.
+ * i386-opc.tbl: Add Intel AVX IFMA instructions.
+ * i386-init.h: Regenerated.
+ * i386-tbl.h: Likewise.
+
+2022-11-02 GDB Administrator <gdbadmin@sourceware.org>
+
+ Automatic date update in version.in
+
+2022-11-01 Andrew Burgess <aburgess@redhat.com>
+
+ opcodes/arm: don't pass non-string literal to printf like function
+ The earlier commit:
+
+ commit 6576bffe6cbbb53c5756b2fccd2593ba69b74cdf
+ Date: Thu Jul 7 13:43:45 2022 +0100
+
+ opcodes/arm: add disassembler styling for arm
+
+ introduced two places where a register name was passed as the format
+ string to the disassembler's fprintf_styled_func callback. This will
+ cause a warning from some compilers, like this:
+
+ ../../binutils-gdb/opcodes/arm-dis.c: In function ‘print_mve_vld_str_addr’:
+ ../../binutils-gdb/opcodes/arm-dis.c:6005:3: error: format not a string literal and no format arguments [-Werror=format-security]
+ 6005 | func (stream, dis_style_register, arm_regnames[gpr]);
+ | ^~~~
+
+ This commit fixes these by using "%s" as the format string.
+
+2022-11-01 Andrew Burgess <aburgess@redhat.com>
+
+ opcodes/arm: silence compiler warning about uninitialized variable use
+ The earlier commit:
+
+ commit 6576bffe6cbbb53c5756b2fccd2593ba69b74cdf
+ Date: Thu Jul 7 13:43:45 2022 +0100
+
+ opcodes/arm: add disassembler styling for arm
+
+ was causing a compiler warning about a possible uninitialized variable
+ usage within opcodes/arm-dis.c.
+
+ The problem is in print_mve_unpredictable, and relates to the reason
+ variable, which is set by a switch table.
+
+ Currently the switch table does cover every valid value, though there
+ is no default case. The variable switched on is passed in as an
+ argument to the print_mve_unpredictable function.
+
+ Looking at how print_mve_unpredictable is used, there is only one use,
+ the second argument is the one that is used for the switch table,
+ looking at how this argument is set, I don't believe it is possible
+ for this argument to take an invalid value.
+
+ So, I think the compiler warning is a false positive. As such, my
+ proposed solution is to initialize the reason variable to the string
+ "??", this will silence the warning, and the "??" string should never
+ end up being printed.
+
+2022-11-01 Andrew Burgess <aburgess@redhat.com>
+
+ opcodes/arm: add disassembler styling for arm
+ This commit adds disassembler styling for the ARM architecture.
+
+ The ARM disassembler is driven by several instruction tables,
+ e.g. cde_opcodes, coprocessor_opcodes, neon_opcodes, etc
+
+ The type for elements in each table can vary, but they all have one
+ thing in common, a 'const char *assembler' field. This field
+ contains a string that describes the assembler syntax of the
+ instruction.
+
+ Embedded within that assembler syntax are various escape characters,
+ prefixed with a '%'. Here's an example of a very simple instruction
+ from the arm_opcodes table:
+
+ "pld\t%a"
+
+ The '%a' indicates a particular type of operand, the function
+ print_insn_arm processes the arm_opcodes table, and includes a switch
+ statement that handles the '%a' operand, and takes care of printing
+ the correct value for that instruction operand.
+
+ It is worth noting that there are many print_* functions, each
+ function handles a single *_opcodes table, and includes its own switch
+ statement for operand handling. As a result, every *_opcodes table
+ uses a different mapping for the operand escape sequences. This means
+ that '%a' might print an address for one *_opcodes table, but in a
+ different *_opcodes table '%a' might print a register operand.
+
+ Notice as well that in our example above, the instruction mnemonic
+ 'pld' is embedded within the assembler string. Some instructions also
+ include comments within the assembler string, for example, also from
+ the arm_opcodes table:
+
+ "nop\t\t\t@ (mov r0, r0)"
+
+ here, everything after the '@' is a comment that is displayed at the
+ end of the instruction disassembly.
+
+ The next complexity is that the meaning of some escape sequences is
+ not necessarily fixed. Consider these two examples from arm_opcodes:
+
+ "ldrex%c\tr%12-15d, [%16-19R]"
+ "setpan\t#%9-9d"
+
+ Here, the '%d' escape is used with a bitfield modifier, '%12-15d' in
+ the first instruction, and '%9-9d' in the second instruction, but,
+ both of these are the '%d' escape.
+
+ However, in the first instruction, the '%d' is used to print a
+ register number, notice the 'r' immediately before the '%d'. In the
+ second instruction the '%d' is used to print an immediate, notice the
+ '#' just before the '%d'.
+
+ We have two problems here, first, the '%d' needs to know if it should
+ use register style or immediate style, and secondly, the 'r' and '#'
+ characters also need to be styled appropriately.
+
+ The final thing we must consider is that some escape codes result in
+ more than just a single operand being printed, for example, the '%q'
+ operand as used in arm_opcodes ends up calling arm_decode_shift, which
+ can print a register name, a shift type, and a shift amount, this
+ could end up using register, sub-mnemonic, and immediate styles, as
+ well as the text style for things like ',' between the different
+ parts.
+
+ I propose a three layer approach to adding styling:
+
+ (1) Basic state machine:
+
+ When we start printing an instruction we should maintain the idea
+ of a 'base_style'. Every character from the assembler string will
+ be printed using the base_style.
+
+ The base_style will start as mnemonic, as each instruction starts
+ with an instruction mnemonic. When we encounter the first '\t'
+ character, the base_style will change to text. When we encounter
+ the first '@' the base_style will change to comment_start.
+
+ This simple state machine ensures that for simple instructions the
+ basic parts, except for the operands themselves, will be printed in
+ the correct style.
+
+ (2) Simple operand styling:
+
+ For operands that only have a single meaning, or which expand to
+ multiple parts, all of which have a consistent meaning, then I
+ will simply update the operand printing code to print the operand
+ with the correct style. This will cover a large number of the
+ operands, and is the most consistent with how styling has been
+ added to previous architectures.
+
+ (3) New styling syntax in assembler strings:
+
+ For cases like the '%d' that I describe above, I propose adding a
+ new extension to the assembler syntax. This extension will allow
+ me to temporarily change the base_style. Operands like '%d', will
+ then print using the base_style rather than using a fixed style.
+
+ Here are the two examples from above that use '%d', updated with
+ the new syntax extension:
+
+ "ldrex%c\t%{R:r%12-15d%}, [%16-19R]"
+ "setpan\t%{I:#%9-9d%}"
+
+ The syntax has the general form '%{X:....%}' where the 'X'
+ character changes to indicate a different style. In the first
+ instruction I use '%{R:...%}' to change base_style to the register
+ style, and in the second '%{I:...%}' changes base_style to
+ immediate style.
+
+ Notice that the 'r' and '#' characters are included within the new
+ style group, this ensures that these characters are printed with
+ the correct style rather than as text.
+
+ The function decode_base_style maps from character to style. I've
+ included a character for each style for completeness, though only
+ a small number of styles are currently used.
+
+ I have updated arm-dis.c to the above scheme, and checked all of the
+ tests in gas/testsuite/gas/arm/, and the styling looks reasonable.
+
+ There are no regressions on the ARM gas/binutils/ld tests that I can
+ see, so I don't believe I've changed the output layout at all. There
+ were two binutils tests for which I needed to force the disassembler
+ styling off.
+
+ I can't guarantee that I've not missed some untested corners of the
+ disassembler, or that I might have just missed some incorrectly styled
+ output when reviewing the test results, but I don't believe I've
+ introduced any changes that could break the disassembler - the worst
+ should be some aspect is not styled correctly.
+
+2022-11-01 Andrew Burgess <aburgess@redhat.com>
+
+ opcodes/arm: use '@' consistently for the comment character
+ Looking at the ARM disassembler output, every comment seems to start
+ with a ';' character, so I assumed this was the correct character to
+ start an assembler comment.
+
+ I then spotted a couple of places where there was no ';', but instead,
+ just a '@' character. I thought that this was a case of a missing
+ ';', and proposed a patch to add the missing ';' characters.
+
+ Turns out I was wrong, '@' is actually the ARM assembler comment
+ character, while ';' is the statement separator. Thus this:
+
+ nop ;@ comment
+
+ is two statements, the first is the 'nop' instruction, while the
+ second contains no instructions, just the '@ comment' comment text.
+
+ This:
+
+ nop @ comment
+
+ is a single 'nop' instruction followed by a comment. And finally,
+ this:
+
+ nop ; comment
+
+ is two statements, the first contains the 'nop' instruction, while the
+ second contains the instruction 'comment', which obviously isn't
+ actually an instruction at all.
+
+ Why this matters is that, in the next commit, I would like to add
+ libopcodes syntax styling support for ARM.
+
+ The question then is how should the disassembler style the three cases
+ above?
+
+ As '@' is the actual comment start character then clearly the '@' and
+ anything after it can be styled as a comment. But what about ';' in
+ the second example? Style as text? Style as a comment?
+
+ And the third example is even harder, what about the 'comment' text?
+ Style as an instruction mnemonic? Style as text? Style as a comment?
+
+ I think the only sensible answer is to move the disassembler to use
+ '@' consistently as its comment character, and remove all the uses of
+ ';'.
+
+ Then, in the next commit, it's obvious what to do.
+
+ There's obviously a *lot* of tests that get updated by this commit,
+ the only actual code changes are in opcodes/arm-dis.c.
+
+2022-11-01 GDB Administrator <gdbadmin@sourceware.org>
+
+ Automatic date update in version.in
+
+2022-10-31 Tom Tromey <tromey@adacore.com>
+
+ Add missing TYPE_CODE_* constants to Python
+ A user noticed that TYPE_CODE_FIXED_POINT was not exported by the gdb
+ Python layer. This patch fixes the bug, and prevents future
+ occurences of this type of bug.
+
+2022-10-31 Carl Love <cel@us.ibm.com>
+
+ Remove REPARSE condition to force hardware resource checking when updating watchpoints
+ Currently the resource checking is done if REPARSE is true. The hardware
+ watchpoint resource checking in update_watchpoint needs to be redone on
+ each call to function update_watchpoints as the value chain may have
+ changed. The number of hardware registers needed for a watchpoint can
+ change if the variable being watched changes. This situation occurs in
+ this test when watching variable **global_ptr_ptr. Initially when the
+ watch command is issued, only two addresses need to be watched as
+ **global_ptr_ptr has not yet been initialized. Once the value of
+ **global_ptr_ptr is initialized the locations to be tracked increase to
+ three addresses. However, update_watchpoints is not called again with
+ REPARSE set to 1 to force the resource checking to be redone. When the
+ test is run on Power 10, an internal gdb error occurs when the PowerPC
+ routine tries to setup the three hardware watchpoint address since the hw
+ only has two hardware watchpoint registers. The error occurs because the
+ resource checking was not redone in update_watchpoints after
+ **global_ptr_ptr changed.
+
+ The following descibes the situation in detail that occurs on Power 10 with
+ gdb running on the binary for gdb.base/watchpoint.c.
+
+ 1 break func4
+ 2 run
+ 3 watch *global_ptr
+ 4 next execute source code: buf[0] = 3;
+ 5 next execute source code: global_ptr = buf;
+ 6 next execute source code: buf[0] = 7;
+ 7 delete 2 (delete watch *global_ptr)
+ 8 watch **global_ptr_ptr
+ 9 next execute source code: buf[1] = 5;
+ 10 next global_ptr_ptr = &global_ptr;
+ 11 next buf[0] = 9;
+
+ In step 8, the the watch **global_ptr_prt command calls update_watchpoint
+ in breakpoint.c with REPARSE set to 1. The function update_watchpoint
+ calls can_use_hardware_watchpoint to see if there are enough
+ resources available to add the watchpoint since REPARSE is set to 1. At
+ this point, **global_ptr_ptr has not been initialized so only two addresses
+ are watched. The val_chain contains the address for **global_ptr_ptr and 0
+ since **global_ptr_ptr has not been initialized. The update_watchpoint
+ updates the breakpoint list as follows:
+
+ breakpoint 0
+ loc 0: b->address = 0x100009c0
+ breakpoint 1
+ loc 1: b->address = 0x7ffff7f838a0
+ breakpoint 2
+ loc 2: b->address = 0x7ffff7b7fc54
+ breakpoint 3
+ loc 3: b->address = 0x7ffff7a5788c
+ breakpoint 4
+ loc 4: b->address = 0x0 <-- location pointed to by global_ptr_ptr
+ loc 5: b->address = 0x100200b8 <-- global_ptr_ptr watchpoint
+ breakpoint 5
+ loc 6: b->address = 0x7ffff7b7fc54
+
+ In step 10, the next command executes the source code
+ global_ptr_ptr = &global_ptr. This changes the set of locations to be
+ watched for the watchpoint **global_ptr_prt. The list of addresses for the
+ breakpoint consist of the address for global_ptr_prt, global_ptr and buf.
+ The breakpoint list gets updated by update_watchpoint as follows:
+
+ breakpoint 0
+ loc 0: b->address = 0x100009c0
+ breakpoint 1
+ loc 1: b->address = 0x7ffff7f838a0
+ breakpoint 2
+ loc 2: b->address = 0x7ffff7b7fc54
+ breakpoint 3
+ loc 3: b->address = 0x7ffff7a5788c
+ breakpoint 4
+ loc 4: b->address = 0x10020050 buf
+ loc 5: b->address = 0x100200b0 watch *global_ptr
+ loc 6: b->address = 0x100200b8 watch **global_ptr_ptr
+ breakpoint 5
+ loc 7: b->address = 0x7ffff7b7fc54
+ breakpoint 6
+
+ However, the hardware resource checking was not redone because
+ update_breakpoint was called with REPARSE equal to 0.
+
+ Step 11, execute the third next command. The function
+ ppc_linux_nat_target::low_prepare_to_resume() attempts a ptrace
+ call to setup each of the three address for breakpoint 4. The slot
+ value returned for the third ptrace call is -1 indicating an error
+ because there are only two hardware watchpoint registers available on
+ Power 10.
+
+ This patch removes just the statement "if (reparse)" in function
+ update_watchpoint to force the resources to be rechecked on every call to
+ the function. This ensures that any changes to the val_chain resulting
+ in needing more resources then available will be caught.
+
+ The patch has been tested on Power 8, Power 10 and X86-64. Note the patch
+ has no effect on Power 9 since hardware watchpoint support is disabled on
+ that processor.
+
+2022-10-31 Carl Love <cel@us.ibm.com>
+
+ PowerPC, add support for recording pipe2 system call.
+ Test gdb.reverse/pipe-reverse.exp fails on Power 10 running the fedora 36
+ distro. The gdb record error message is:
+
+ Process record and replay target doesn't support syscall number 317.
+
+ System call 317 on PowerPC maps to the pipe2 system call.
+
+ This patch adds support for the missing pipe2 system call for PowerPC.
+
+ Patch fixes the test failure in gdb.reverse/pipe-reverse.exp.
+
+ The patch has been tested on Power 10 with no regression failures.
+
+2022-10-31 Jan Beulich <jbeulich@suse.com>
+
+ x86: minor improvements to optimize_imm() (part III)
+ Earlier tidying still missed an opportunity: There's no need for the
+ "anyimm" static variable. Instead of using it in the loop to mask
+ "allowed" (which is necessary to satisfy operand_type_or()'s assertions)
+ simply use "mask", requiring it to be calculated first. That way the
+ post-loop masking by "mask" ahead of the operand_type_all_zero() can be
+ dropped.
+
+2022-10-31 Mike Frysinger <vapier@gentoo.org>
+
+ sim: reg: constify store helper
+ These functions only read from memory, so mark the pointer as const.
+
+ sim: constify various integer readers
+ These functions only read from memory, so mark the pointer as const.
+
+ sim: cgen: constify GETT helpers
+ These functions only read from memory, so mark the pointer as const.
+
+ sim: common: change sim_read & sim_write to use void* buffers
+ When reading/writing arbitrary data to the system's memory, the unsigned
+ char pointer type doesn't make that much sense. Switch it to void so we
+ align a bit with standard C library read/write functions, and to avoid
+ having to sprinkle casts everywhere.
+
+2022-10-31 H.J. Lu <hjl.tools@gmail.com>
+
+ x86: Silence GCC 12 warning on tc-i386.c
+ Silence GCC 12 warning on tc-i386.c:
+
+ gas/config/tc-i386.c: In function ‘md_assemble’:
+ gas/config/tc-i386.c:5039:16: error: too many arguments for format [-Werror=format-extra-args]
+ 5039 | as_warn (_("only support RIP-relative address"), i.tm.name);
+
+ * config/tc-i386.c (md_assemble): Print mnemonic in RIP-relative
+ warning.
+ * estsuite/gas/i386/x86-64-prefetchi-warn.l: Updated.
+
+2022-10-31 Tom Tromey <tromey@adacore.com>
+
+ Use enum for gdbarch's call_dummy_location
+ This changes gdbarch to use an enum for call_dummy_location, providing
+ a little more type safety.
+
+ Inline initialization of gdbarch members
+ This changes gdbarch to use the "predefault" to initialize its members
+ inline. This required changing a couple of the Value instantiations
+ to avoid a use of "gdbarch" during initialization, but on the whole I
+ think this is better -- it removes a hidden ordering dependency.
+
+2022-10-31 Tom Tromey <tromey@adacore.com>
+
+ Fix regression in pointer-to-member printing
+ PR c++/29243 points out that "info func" on a certain C++ executable
+ will cause an infinite loop in gdb.
+
+ I tracked this down to a bug introduced by commit 6b5a7bc76 ("Handle
+ member pointers directly in generic_value_print"). Before this
+ commit, the C++ code to print a member pointer would wind up calling
+ value_print_scalar_formatted; but afterward it simply calls
+ generic_value_print and gets into a loop.
+
+ This patch restores the previous behavior and adds a regression test.
+
+2022-10-31 Nick Clifton <nickc@redhat.com>
+
+ Updated Romainain translation for the binutils sub-directory and Swedish translations for the ld and opcodes sub-directories.
+
+2022-10-31 Cui, Lili <lili.cui@intel.com>
+
+ Support Intel PREFETCHI
+ gas/ChangeLog:
+
+ * NEWS: Add support for Intel PREFETCHI instruction.
+ * config/tc-i386.c (load_insn_p): Use prefetch* to fold all prefetches.
+ (md_assemble): Add warning for illegal input of PREFETCHI.
+ * doc/c-i386.texi: Document .prefetchi.
+ * testsuite/gas/i386/i386.exp: Run PREFETCHI tests.
+ * testsuite/gas/i386/x86-64-lfence-load.d: Add PREFETCHI.
+ * testsuite/gas/i386/x86-64-lfence-load.s: Likewise.
+ * testsuite/gas/i386/x86-64-prefetch.d: New test.
+ * testsuite/gas/i386/x86-64-prefetchi-intel.d: Likewise.
+ * testsuite/gas/i386/x86-64-prefetchi-inval-register.d: Likewise..
+ * testsuite/gas/i386/x86-64-prefetchi-inval-register.s: Likewise.
+ * testsuite/gas/i386/x86-64-prefetchi-warn.l: Likewise.
+ * testsuite/gas/i386/x86-64-prefetchi-warn.s: Likewise.
+ * testsuite/gas/i386/x86-64-prefetchi.d: Likewise.
+ * testsuite/gas/i386/x86-64-prefetchi.s: Likewise.
+
+ opcodes/ChangeLog:
+
+ * i386-dis.c (reg_table): Add MOD_0F18_REG_6 and MOD_0F18_REG_7
+ (x86_64_table): Add X86_64_0F18_REG_6_MOD_0 and X86_64_0F18_REG_7_MOD_0.
+ (mod_table): Add MOD_0F18_REG_6 and MOD_0F18_REG_7.
+ (prefix_table): Add PREFIX_0F18_REG_6_MOD_0_X86_64 and
+ PREFIX_0F18_REG_7_MOD_0_X86_64.
+ (PREFETCHI_Fixup): New.
+ * i386-gen.c (cpu_flag_init): Add CPU_PREFETCHI_FLAGS.
+ (cpu_flags): Add CpuPREFETCHI.
+ * i386-opc.h (CpuPREFETCHI): New.
+ (i386_cpu_flags): Add cpuprefetchi.
+ * i386-opc.tbl: Add Intel PREFETCHI instructions.
+ * i386-init.h: Regenerated.
+ * i386-tbl.h: Likewise.
+
+2022-10-31 Bruno Larsen <blarsen@redhat.com>
+
+ gdb/testsuite: fix gdb.cp/converts.exp to run with clang
+ Clang attempts to minimize the size of the debug-info by not adding
+ complete information about types that aren't constructed in a given
+ file. Specifically, this meant that there was minimal information about
+ class B in the test gdb.cp/converts.exp. To fix this, we just need to
+ construct any object of type B in that file.
+
+ Approved-By: Andrew Burgess <aburgess@redhat.com>
+
+2022-10-31 Bruno Larsen <blarsen@redhat.com>
+
+ gdb/testsuite: add XFAIL to gdb.cp/ptype-flags.exp when using clang
+ When running gdb.cp/ptype-flags.exp using Clang, we get an unexpected
+ failure when printing the type of a class with an internal typedef. This
+ happens because Clang doesn't add accessibility information for typedefs
+ inside classes (see https://github.com/llvm/llvm-project/issues/57608
+ for more info). To help with Clang testing, an XFAIL was added to this
+ test.
+
+2022-10-31 Yoshinori Sato <ysato@users.sourceforge.jp>
+
+ RX assembler: switch arguments of thw MVTACGU insn.
+
+2022-10-31 Nick Clifton <nickc@redhat.com>
+
+ objdump: Add configure time option to enable colored disassembly output by default.
+ PR 29457
+ * configure.ac: Add --enable-colored-disassembly.
+ * objdump.c: Add --disassembler-color=terminal.
+ * doc/binutils.texi (objdump): Document the new option.
+ * NEWS: Mention new feature.
+ * config.in: Regenerate in.
+ * configure: Regenerate.
+
+2022-10-31 Mark Harmstone <mark@harmstone.com>
+
+ ld: Add publics stream to PDB files
+
+ ld: Add section header stream to PDB files
+
+ ld: Use %E in einfo in pdb.c
+ Resubmission, taking into account
+ https://sourceware.org/pipermail/binutils/2022-October/123948.html.
+
+2022-10-31 GDB Administrator <gdbadmin@sourceware.org>
+
+ Automatic date update in version.in
+
+2022-10-30 Alan Modra <amodra@gmail.com>
+
+ Pool section entries for DWP version 1
+ Ref: https://gcc.gnu.org/wiki/DebugFissionDWP?action=recall&rev=3
+
+ Fuzzers have found a weakness in the code stashing pool section
+ entries. With random nonsensical values in the index entries (rather
+ than each index pointing to its own set distinct from other sets),
+ it's possible to overflow the space allocated, losing the NULL
+ terminator. Without a terminator, find_section_in_set can run off the
+ end of the shndx_pool buffer. Fix this by scanning the pool directly.
+
+ binutils/
+ * dwarf.c (add_shndx_to_cu_tu_entry): Delete range check.
+ (end_cu_tu_entry): Likewise.
+ (process_cu_tu_index): Fill shndx_pool by directly scanning
+ pool, rather than indirectly from index entries.
+
+2022-10-30 GDB Administrator <gdbadmin@sourceware.org>
+
+ Automatic date update in version.in
+
+2022-10-29 Maciej W. Rozycki <macro@embecosm.com>
+
+ gdb/testsuite: Wrap `param_integer_error' in gdb.guile/scm-parameter.exp
+ Wrap an overlong line in the definition of `param_integer_error' in
+ gdb.guile/scm-parameter.exp. No functional change.
+
+2022-10-29 Tsukasa OI <research_trasio@irq.a4lg.com>
+
+ sim/sh: Remove redundant function declaration
+ Clang generates a warning if there is a function declaration/definition
+ with zero arguments. Such declarations/definitions without a prototype (an
+ argument list) are deprecated forms of indefinite arguments
+ ("-Wdeprecated-non-prototype"). On the default configuration, it causes a
+ build failure (unless "--disable-werror" is specified).
+
+ But there is another issue. This function declaration in sim/sh/interp.c
+ is completely redundant. This commit just removes that declaration.
+
+2022-10-29 Tsukasa OI <research_trasio@irq.a4lg.com>
+
+ sim/m32r: Initialize "list" variable
+ The variable "list" is only initialized when arg1 > 0 and when arg1 == 0,
+ an uninitialized value is passed to translate_endian_h2t function.
+
+ Although this behavior is harmless, this commit adds initialization to avoid
+ a GCC warning ("-Wmaybe-uninitialized").
+
+2022-10-29 Tsukasa OI <research_trasio@irq.a4lg.com>
+
+ sim/erc32: Use int32_t as IRQ callback argument
+ Clang generates a warning if an argument is passed to a function without
+ prototype (zero arguments, even without (void)). Such calls are deprecated
+ forms of indefinite arguments passing ("-Wdeprecated-non-prototype").
+ On the default configuration, it (somehow) doesn't cause a build failure but
+ a warning is generated.
+
+ But because the cause is the same as the issue the author fixed in
+ "sim/erc32: Use int32_t as event callback argument", it would be better to
+ fix it now to prevent problems in the future.
+
+ To fix the issue, this commit makes struct irqcall to use int32_t as a
+ callback (callback) argument of an IRQ.
+
+2022-10-29 Tsukasa OI <research_trasio@irq.a4lg.com>
+
+ sim/erc32: Use int32_t as event callback argument
+ Clang generates a warning if an argument is passed to a function without
+ prototype (zero arguments, even without (void)). Such calls are deprecated
+ forms of indefinite arguments passing ("-Wdeprecated-non-prototype").
+ On the default configuration, it causes a build failure (unless
+ "--disable-werror" is specified).
+
+ To fix that, this commit makes struct evcell to use int32_t as a callback
+ (cfunc) argument of an event. int32_t is chosen because "event" function
+ accepts "int32_t arg".
+
+2022-10-29 Tsukasa OI <research_trasio@irq.a4lg.com>
+
+ sim/erc32: Insert void parameter
+ Clang generates a warning if there is a function declaration/definition
+ with zero arguments. Such declarations/definitions without a prototype (an
+ argument list) are deprecated forms of indefinite arguments
+ ("-Wdeprecated-non-prototype"). On the default configuration, it causes a
+ build failure (unless "--disable-werror" is specified).
+
+ This commit replaces () with (void) to avoid this warning.
+
+2022-10-29 Tom de Vries <tdevries@suse.de>
+
+ [gdb/testsuite] Use ssh -t in remote-*.exp
+ When running test-case gdb.server/multi-ui-errors.exp on target board
+ remote-gdbserver-on-localhost.exp, I run into:
+ ...
+ (gdb) PASS: gdb.server/multi-ui-errors.exp: connect to gdbserver
+ continue^M
+ Continuing.^M
+ PASS: gdb.server/multi-ui-errors.exp: continue - extra UI
+ Remote debugging from host ::1, port 35466^M
+ FAIL: gdb.server/multi-ui-errors.exp: ensure inferior is running
+ ...
+
+ The problem is that the target board uses ssh -T, which fails to guarantee
+ that output from the inferior will be available.
+
+ Fix this by copying proc ${board}_spawn from local-remote-host.exp, which
+ ensures using ssh -t. [ It would be nice to define an ssh base board to
+ get rid of the copies, but I'm not addressing that in this commit. ]
+
+ Likewise for target board remote-stdio-gdbserver.exp.
+
+ Tested on x86_64-linux.
+
+2022-10-29 Tom de Vries <tdevries@suse.de>
+
+ [gdb/testsuite] Fix gdb.server/multi-ui-errors.exp with local-remote-host-notty
+ With test-case gdb.server/multi-ui-errors.exp and host board
+ local-remote-host-notty, I run into:
+ ...
+ (gdb) PASS: gdb.server/multi-ui-errors.exp: interact with GDB's main UI
+ Executing on target: kill -9 29666 (timeout = 300)
+ builtin_spawn -ignore SIGHUP kill -9 29666^M
+ echo^M
+ Remote connection closed^M
+ (gdb) (gdb) FAIL: gdb.server/multi-ui-errors.exp: \
+ main UI, prompt after gdbserver dies (timeout)
+ ...
+
+ In contrast, with local-remote-host (so, everything the same but editing off):
+ ...
+ (gdb) PASS: gdb.server/multi-ui-errors.exp: interact with GDB's main UI
+ Executing on target: kill -9 31245 (timeout = 300)
+ builtin_spawn -ignore SIGHUP kill -9 31245^M
+ Remote connection closed^M
+ (gdb) echo^M
+ (gdb) PASS: gdb.server/multi-ui-errors.exp: main UI, prompt after gdbserver dies
+ ...
+
+ The test-case issues a kill, which results in a "Remote connection closed"
+ message and a prompt.
+
+ The problem is that the prompt is not consumed, so the subsequent echo may be
+ issued before that prompt, which causes a mismatch when matching the result
+ of the echo.
+
+ Fix this by consuming the "Remote connection closed" message and prompt.
+
+ Tested on x86_64-linux.
+
+2022-10-29 Tom de Vries <tdevries@suse.de>
+
+ [gdb/testsuite] Consume output asap in gdb.server/multi-ui-errors.exp
+ With test-case gdb.server/multi-ui-errors.exp we see:
+ ...
+ (gdb) PASS: multi-ui-errors.exp: main UI, prompt after gdbserver dies
+ continue^M
+ Continuing.^M
+ echo^M
+ (gdb) PASS: multi-ui-errors.exp: extra UI, prompt after gdbserver dies
+ ...
+
+ The continue is issued earlier in the test-case, but the output has not been
+ consumed, which makes it show up much later.
+
+ Consume the continue output asap, to make it clear when the continue is issued:
+ ...
+ (gdb) PASS: gdb.server/multi-ui-errors.exp: connect to gdbserver
+ continue^M
+ Continuing.^M
+ PASS: gdb.server/multi-ui-errors.exp: continue - extra UI
+ ...
+
+ Tested on x86_64-linux.
+
+2022-10-29 Tom de Vries <tdevries@suse.de>
+
+ [gdb/testsuite] Remove REMOTE_PORTNUM in remote-stdio-gdbserver.exp
+ The usage for board remote-stdio-gdbserver.exp is advertised as:
+ ...
+ # bash$ make check RUNTESTFLAGS="--target_board=remote-stdio-gdbserver \
+ # REMOTE_USERNAME=... REMOTE_HOSTNAME=... REMOTE_PORTNUM=... \
+ # [REMOTE_TMPDIR=${remote_dir}] [GDBSERVER=${remote_gdbserver}]"
+ ...
+ but when adding REMOTE_PORTNUM=22, I run into:
+ ...
+ Running stop-reply-no-thread-multi.exp ...
+ ERROR: tcl error sourcing stop-reply-no-thread-multi.exp.
+ ERROR: couldn't execute "/usr/bin/ssh -p22": no such file or directory
+ while executing
+ "builtin_spawn {/usr/bin/ssh -p22} -l vries localhost {/usr/bin/gdbserver \
+ --once localhost:2346 \
+ /home/vries/gdb_versions/devel/build/gdb/testsuite/outp..."
+ ...
+
+ Fix this by simply removing REMOTE_PORTNUM.
+
+ Tested on x86_64-linux.
+
+2022-10-29 Tsukasa OI <research_trasio@irq.a4lg.com>
+
+ sim, sim/{m32c,ppc,rl78}: Use getopt_long
+ Because of a Libiberty hack, getopt on GNU libc (2.25 or earlier) is
+ currently unusable on sim, causing a regression on CentOS 7.
+
+ This is caused as follows:
+
+ 1. If HAVE_DECL_GETOPT is defined (getopt declaration with known prototype
+ is detected while configuration), a declaration of getopt in
+ "include/getopt.h" is suppressed.
+ The author started to define HAVE_DECL_GETOPT in sim with the commit
+ 340aa4f6872c ("sim: Check known getopt definition existence").
+ 2. GNU libc (2.25 or earlier)'s <unistd.h> includes <getopt.h> with a
+ special purpose macro defined to declare only getopt function but due
+ to include path (not tested while configuration), it causes <unistd.h>
+ to include Libiberty's "include/getopt.h".
+ 3. If both 1. and 2. are satisfied, despite that <unistd.h> tries to
+ declare getopt by including <getopt.h>, "include/getopt.h" does not do
+ so, causing getopt function undeclared.
+
+ Getting rid of "include/getopt.h" (e.g. renaming this header file) is the
+ best solution to avoid hacking but as a short-term solution, this commit
+ replaces getopt with getopt_long under sim/.
+
+2022-10-29 Alan Modra <amodra@gmail.com>
+
+ pef: sanity check before malloc
+ And do the sanity check in a way that can't overflow.
+
+ * pef.c (bfd_pef_parse_function_stubs): Sanity check header
+ imported_library_count and total_imported_symbol_count before
+ allocating memory.
+
+2022-10-29 Alan Modra <amodra@gmail.com>
+
+ Fix small objcopy memory leak
+ * objcopy.c (copy_archive): Free l->name.
+
+2022-10-29 Alan Modra <amodra@gmail.com>
+
+ NULL dereference read in som_write_object_contents
+ objcopy copy_object may omit the call to bfd_copy_private_bfd_data for
+ various conditions deemed non-fatal, in which case obj_som_exec_data
+ will be NULL for the output file.
+
+ * som.c (som_finish_writing): Don't dereference NULL
+ obj_som_exec_data.
+
+2022-10-29 Nelson Chu <nelson@rivosinc.com>
+
+ RISC-V: Always generate mapping symbols at the start of the sections.
+ Before figuring out the suppress rule of mapping symbol with architecture
+ (changed back to $x), always generate them at the start of the sections.
+
+ gas/
+ * config/tc-riscv.c (need_arch_map_symbol): Removed.
+ (riscv_mapping_state): Updated.
+ (riscv_check_mapping_symbols): Updated.
+ * testsuite/gas/riscv/mapping-non-arch.d: Removed.
+ * testsuite/gas/riscv/mapping-non-arch.s: Likewise.
+
+2022-10-29 GDB Administrator <gdbadmin@sourceware.org>
+
+ Automatic date update in version.in
+
+2022-10-28 Palmer Dabbelt <palmer@rivosinc.com>
+
+ gas: NEWS: Note support for RISC-V Zawrs
+ This has been supported since eb668e50036 ("RISC-V: Add Zawrs ISA
+ extension support").
+
+ gas: NEWS: Add a missing newline
+
+2022-10-28 Tom Tromey <tom@tromey.com>
+
+ Convert compunit_language to a method
+ This changes compunit_language to be a method on compunit_symtab.
+
+ Approved-By: Simon Marchi <simon.marchi@efficios.com>
+
+2022-10-28 Tsukasa OI <research_trasio@irq.a4lg.com>
+
+ RISC-V: Improve "bits undefined" diagnostics
+ This commit improves internal error message
+ "internal: bad RISC-V opcode (bits 0x%lx undefined): %s %s"
+ to display actual unused bits (excluding non-instruction bits).
+
+ gas/ChangeLog:
+
+ * config/tc-riscv.c (validate_riscv_insn): Exclude non-
+ instruction bits from displaying internal diagnostics.
+ Change error message slightly.
+
+2022-10-28 Tsukasa OI <research_trasio@irq.a4lg.com>
+
+ RISC-V: Fallback for instructions longer than 64b
+ We don't support instructions longer than 64-bits yet. Still, we can
+ modify validate_riscv_insn function to prevent unexpected behavior by
+ limiting the "length" of an instruction to 64-bit (or less).
+
+ gas/ChangeLog:
+
+ * config/tc-riscv.c (validate_riscv_insn): Fix function
+ description comment based on current spec. Limit instruction
+ length up to 64-bit for now. Make sure that required_bits does
+ not corrupt even if unsigned long long is longer than 64-bit.
+
+2022-10-28 Jan Beulich <jbeulich@suse.com>
+
+ RISC-V/gas: fix build with certain gcc versions
+ Some versions of gcc warn by default about shadowed outer-scope
+ declarations. This affects frag_align_code, which is declared in
+ frags.h. Rename the offending function parameter. While there also
+ switch to using true/false at the function call sites.
+
+2022-10-28 Tsukasa OI <research_trasio@irq.a4lg.com>
+
+ RISC-V: Fix build failure for -Werror=maybe-uninitialized
+ Commit 40f1a1a4564b ("RISC-V: Output mapping symbols with ISA string.")
+ caused a build failure on GCC 12 as follows:
+
+ make[3]: Entering directory '$(builddir)/gas'
+ CC config/tc-riscv.o
+ In file included from $(srcdir)/gas/config/tc-riscv.c:23:
+ $(srcdir)/gas/as.h: In function ‘make_mapping_symbol’:
+ $(srcdir)/gas/as.h:123:15: error: ‘buff’ may be used uninitialized [-Werror=maybe-uninitialized]
+ 123 | #define xfree free
+ | ^~~~
+ $(srcdir)/gas/config/tc-riscv.c:487:9: note: ‘buff’ was declared here
+ 487 | char *buff;
+ | ^~~~
+ cc1: all warnings being treated as errors
+ make[3]: *** [Makefile:1425: config/tc-riscv.o] Error 1
+
+ This is caused by a false positive of "maybe uninitialized" variable
+ detection (-Wmaybe-uninitialized). To avoid this error, this commit
+ initializes the local variable buff to NULL first in all cases.
+
+ gas/ChangeLog:
+
+ * config/tc-riscv.c (make_mapping_symbol): Initialize variable
+ buff with NULL to avoid build failure caused by a GCC's false
+ positive of maybe uninitialized variable detection.
+
+2022-10-28 Markus Metzger <markus.t.metzger@intel.com>
+
+ gdb, btrace: fix family and model computation
+ In gdb/nat/linux-btrace.c:btrace_this_cpu() we initialize the cpu
+ structure given to the libipt btrace decoder.
+
+ We only consider the extended model field for family 0x6 and forget about
+ family 0xf and we don't consider the extended family field. Fix it.
+
+2022-10-28 Tsukasa OI <research_trasio@irq.a4lg.com>
+
+ include: Define macro to ignore -Wdeprecated-declarations on GCC
+ "-Wdeprecated-declarations" warning option can be helpful to track
+ deprecated function delarations but sometimes we need to disable this
+ warning for a good reason.
+
+ DIAGNOSTIC_IGNORE_DEPRECATED_DECLARATIONS is an existing macro but only
+ defined on Clang. Since "-Wdeprecated-declarations" is also available on
+ GCC (>= 3.4.0), this commit adds equivalent definition as Clang.
+
+ __GNUC__ and __GNUC_MINOR__ are not checked because this header file seems
+ to assume GCC >= 4.6 (with "GCC diagnostic push/pop").
+
+ include/ChangeLog:
+
+ * diagnostics.h (DIAGNOSTIC_IGNORE_DEPRECATED_DECLARATIONS):
+ Define also on GCC.
+
+2022-10-28 Nelson Chu <nelson@rivosinc.com>
+
+ RISC-V: Output mapping symbols with ISA string.
+ RISC-V Psabi pr196,
+ https://github.com/riscv-non-isa/riscv-elf-psabi-doc/pull/196
+
+ bfd/
+ * elfxx-riscv.c (riscv_release_subset_list): Free arch_str if needed.
+ (riscv_copy_subset_list): Copy arch_str as well.
+ * elfxx-riscv.h (riscv_subset_list_t): Store arch_str for each subset list.
+ gas/
+ * config/tc-riscv.c (riscv_reset_subsets_list_arch_str): Update the
+ architecture string in the subset_list.
+ (riscv_set_arch): Call riscv_reset_subsets_list_arch_str after parsing new
+ architecture string.
+ (s_riscv_option): Likewise.
+ (need_arch_map_symbol): New boolean, used to indicate if .option
+ directives do affect instructions.
+ (make_mapping_symbol): New boolean parameter reset_seg_arch_str. Need to
+ generate $x+arch for MAP_INSN, and then store it into tc_segment_info_data
+ if reset_seg_arch_str is true.
+ (riscv_mapping_state): Decide if we need to add $x+arch for MAP_INSN. For
+ now, only add $x+arch if the architecture strings in subset list and segment
+ are different. Besides, always add $x+arch at the start of section, and do
+ not add $x+arch for code alignment, since rvc for alignment can be judged
+ from addend of R_RISCV_ALIGN.
+ (riscv_remove_mapping_symbol): If current and previous mapping symbol have
+ same value, then remove the current $x only if the previous is $x+arch;
+ Otherwise, always remove previous.
+ (riscv_add_odd_padding_symbol): Updated.
+ (riscv_check_mapping_symbols): Don't need to add any $x+arch if
+ need_arch_map_symbol is false, so changed them to $x.
+ (riscv_frag_align_code): Updated since riscv_mapping_state is changed.
+ (riscv_init_frag): Likewise.
+ (s_riscv_insn): Likewise.
+ (riscv_elf_final_processing): Call riscv_release_subset_list to release
+ subset_list of riscv_rps_as, rather than only release arch_str in the
+ riscv_write_out_attrs.
+ (riscv_write_out_attrs): No need to call riscv_arch_str, just get arch_str
+ from subset_list of riscv_rps_as.
+ * config/tc-riscv.h (riscv_segment_info_type): Record current $x+arch mapping
+ symbol of each segment.
+ * testsuite/gas/riscv/mapping-0*: Merged and replaced by mapping.s.
+ * testsuite/gas/riscv/mapping.s: New testcase, to test most of the cases in
+ one file.
+ * testsuite/gas/riscv/mapping-symbols.d: Likewise.
+ * testsuite/gas/riscv/mapping-dis.d: Likewise.
+ * testsuite/gas/riscv/mapping-non-arch.s: New testcase for the case that
+ does need any $x+arch.
+ * testsuite/gas/riscv/mapping-non-arch.d: Likewise.
+ * testsuite/gas/riscv/option-arch-01a.d: Updated.
+ opcodes/
+ * riscv-dis.c (riscv_disassemble_insn): Set riscv_fpr_names back to
+ riscv_fpr_names_abi or riscv_fpr_names_numeric when zfinx is disabled
+ for some specfic code region.
+ (riscv_get_map_state): Recognized mapping symbols $x+arch, and then reset
+ the architecture string once the ISA is different.
+
+2022-10-28 Lifang Xia <lifang_xia@linux.alibaba.com>
+
+ binutils: Update my e-mail and Yunhai's e-mail
+ binutils/
+ * MAINTAINERS(C-SKY): update e-mails of Lifang & Yunhai.
+
+2022-10-28 Peter Bergner <bergner@linux.ibm.com>
+
+ PowerPC: Add support for RFC02658 - MMA+ Outer-Product Instructions
+ gas/
+ * config/tc-ppc.c (md_assemble): Only check for prefix opcodes.
+ * testsuite/gas/ppc/rfc02658.s: New test.
+ * testsuite/gas/ppc/rfc02658.d: Likewise.
+ * testsuite/gas/ppc/ppc.exp: Run it.
+
+ opcodes/
+ * ppc-opc.c (XMSK8, P_GERX4_MASK, P_GERX2_MASK, XX3GERX_MASK): New.
+ (powerpc_opcodes): Add dmxvi8gerx4pp, dmxvi8gerx4, dmxvf16gerx2pp,
+ dmxvf16gerx2, dmxvbf16gerx2pp, dmxvf16gerx2np, dmxvbf16gerx2,
+ dmxvi8gerx4spp, dmxvbf16gerx2np, dmxvf16gerx2pn, dmxvbf16gerx2pn,
+ dmxvf16gerx2nn, dmxvbf16gerx2nn, pmdmxvi8gerx4pp, pmdmxvi8gerx4,
+ pmdmxvf16gerx2pp, pmdmxvf16gerx2, pmdmxvbf16gerx2pp, pmdmxvf16gerx2np,
+ pmdmxvbf16gerx2, pmdmxvi8gerx4spp, pmdmxvbf16gerx2np, pmdmxvf16gerx2pn,
+ pmdmxvbf16gerx2pn, pmdmxvf16gerx2nn, pmdmxvbf16gerx2nn.
+
+2022-10-28 Peter Bergner <bergner@linux.ibm.com>
+
+ PowerPC: Add support for RFC02653 - Dense Math Facility
+ gas/
+ * config/tc-ppc.c (pre_defined_registers): Add dense math registers.
+ (md_assemble): Check dmr specified in correct operand.
+ * testsuite/gas/ppc/outerprod.s <dmsetaccz, dmxvbf16ger2,
+ dmxvbf16ger2nn, dmxvbf16ger2np, dmxvbf16ger2pn, dmxvbf16ger2pp,
+ dmxvf16ger2, dmxvf16ger2nn, dmxvf16ger2np, dmxvf16ger2pn, dmxvf16ger2pp,
+ dmxvf32ger, dmxvf32gernn, dmxvf32gernp, dmxvf32gerpn, dmxvf32gerpp,
+ dmxvf64ger, dmxvf64gernn, dmxvf64gernp, dmxvf64gerpn, dmxvf64gerpp,
+ dmxvi16ger2, dmxvi16ger2pp, dmxvi16ger2s, dmxvi16ger2spp, dmxvi4ger8,
+ dmxvi4ger8pp, dmxvi8ger4, dmxvi8ger4pp, dmxvi8ger4spp, dmxxmfacc,
+ dmxxmtacc, pmdmxvbf16ger2, pmdmxvbf16ger2nn, pmdmxvbf16ger2np,
+ pmdmxvbf16ger2pn, pmdmxvbf16ger2pp, pmdmxvf16ger2, pmdmxvf16ger2nn,
+ pmdmxvf16ger2np, pmdmxvf16ger2pn, pmdmxvf16ger2pp, pmdmxvf32ger,
+ pmdmxvf32gernn, pmdmxvf32gernp, pmdmxvf32gerpn, pmdmxvf32gerpp,
+ pmdmxvf64ger, pmdmxvf64gernn, pmdmxvf64gernp, pmdmxvf64gerpn,
+ pmdmxvf64gerpp, pmdmxvi16ger2, pmdmxvi16ger2pp, pmdmxvi16ger2s,
+ pmdmxvi16ger2spp, pmdmxvi4ger8, pmdmxvi4ger8pp, pmdmxvi8ger4,
+ pmdmxvi8ger4pp, pmdmxvi8ger4spp>: Add new tests.
+ * testsuite/gas/ppc/outerprod.d: Likewise.
+ * testsuite/gas/ppc/rfc02653.s: New test.
+ * testsuite/gas/ppc/rfc02653.d: Likewise.
+ * testsuite/gas/ppc/ppc.exp: Run it.
+
+ include/
+ * opcode/ppc.h (PPC_OPERAND_DMR): Define. Renumber following
+ PPC_OPERAND defines.
+
+ opcodes/
+ * ppc-dis.c (print_insn_powerpc): Prepend 'dm' when printing DMR regs.
+ * ppc-opc.c (insert_p2, (extract_p2, (insert_xa5, (extract_xa5,
+ insert_xb5, (extract_xb5): New functions.
+ (insert_xa6a, extract_xa6a, insert_xb6a, extract_xb6a): Disallow
+ operand overlap only on Power10.
+ (DMR, DMRAB, P1, P2, XA5p, XB5p, XDMR_MASK, XDMRDMR_MASK, XX2ACC_MASK,
+ XX2DMR_MASK, XX3DMR_MASK): New defines.
+ (powerpc_opcodes): Add dmmr, dmsetaccz, dmsetdmrz, dmxor, dmxvbf16ger2,
+ dmxvbf16ger2nn, dmxvbf16ger2np, dmxvbf16ger2pn, dmxvbf16ger2pp,
+ dmxvf16ger2, dmxvf16ger2nn, dmxvf16ger2np, dmxvf16ger2pn, dmxvf16ger2pp,
+ dmxvf32ger, dmxvf32gernn, dmxvf32gernp, dmxvf32gerpn, dmxvf32gerpp,
+ dmxvf64ger, dmxvf64gernn, dmxvf64gernp, dmxvf64gerpn, dmxvf64gerpp,
+ dmxvi16ger2, dmxvi16ger2pp, dmxvi16ger2s, dmxvi16ger2spp, dmxvi4ger8,
+ dmxvi4ger8pp, dmxvi8ger4, dmxvi8ger4pp, dmxvi8ger4spp, dmxxextfdmr256,
+ dmxxextfdmr512, dmxxinstdmr256, dmxxinstdmr512, dmxxmfacc, dmxxmtacc,
+ pmdmxvbf16ger2, pmdmxvbf16ger2nn, pmdmxvbf16ger2np, pmdmxvbf16ger2pn,
+ pmdmxvbf16ger2pp, pmdmxvf16ger2, pmdmxvf16ger2nn, pmdmxvf16ger2np,
+ pmdmxvf16ger2pn, pmdmxvf16ger2pp, pmdmxvf32ger, pmdmxvf32gernn,
+ pmdmxvf32gernp, pmdmxvf32gerpn, pmdmxvf32gerpp, pmdmxvf64ger,
+ pmdmxvf64gernn, pmdmxvf64gernp, pmdmxvf64gerpn, pmdmxvf64gerpp,
+ pmdmxvi16ger2, pmdmxvi16ger2pp, pmdmxvi16ger2s, pmdmxvi16ger2spp,
+ pmdmxvi4ger8, pmdmxvi4ger8pp, pmdmxvi8ger4, pmdmxvi8ger4pp,
+ pmdmxvi8ger4spp.
+
+2022-10-28 GDB Administrator <gdbadmin@sourceware.org>
+
+ Automatic date update in version.in
+
+2022-10-27 Andrew Burgess <aburgess@redhat.com>
+
+ sim/cgen: initialize variable at creation in engine_run_n
+ Zero initialize engine_fns entirely at creation, then override those
+ fields we intend to use, rather than zero just initializing the unused
+ fields later on.
+
+ There should be no user visible changes after this commit.
+
+2022-10-27 Tom de Vries <tdevries@suse.de>
+
+ [gdb/testsuite] Remove address from test names
+ I noticed an address in a test name:
+ ...
+ PASS: gdb.base/eh_return.exp: gdb_breakpoint: \
+ set breakpoint at *0x000000000040071b
+ ...
+
+ Stabilize the test name by using "set breakpoint on address" instead.
+
+ Likewise in two other test-cases.
+
+ Tested on x86_64-linux.
+
+2022-10-27 Tom de Vries <tdevries@suse.de>
+
+ [gdb/testsuite] Disable styling in host board local-remote-host-native.exp
+ Propagate fix from commit 17c68d98f74 ("[gdb/testsuite] Disable styling in host
+ board local-remote-host.exp") to local-remote-host-native.exp.
+
+ Tested on x86_64-linux.
+
+2022-10-27 Tom de Vries <tdevries@suse.de>
+
+ [gdb/testsuite] Fix silent timeouts in gdb.mi/mi-exec-run.exp with remote host
+ I noticed that running test-case gdb.mi/mi-exec-run.exp with host board
+ local-remote-host.exp takes about 44 seconds.
+
+ I found two silent timeouts responsible for this.
+
+ The first is in mi_gdb_exit, where we have:
+ ...
+ if { [is_remote host] && [board_info host exists fileid] } {
+ send_gdb "999-gdb-exit\n"
+ gdb_expect 10 {
+ -re "y or n" {
+ send_gdb "y\n"
+ exp_continue
+ }
+ -re "Undefined command.*$gdb_prompt $" {
+ send_gdb "quit\n"
+ exp_continue
+ }
+ -re "DOSEXIT code" { }
+ }
+ }
+ ...
+ so in gdb.log we see:
+ ...
+ 999-gdb-exit^M
+ 999^exit^M
+ =thread-exited,id="1",group-id="i1"^M
+ =thread-group-exited,id="i1"^M
+ ...
+ after which expect just waits for the timeout.
+
+ Fix this by adding a gdb_expect clause to parse the exit:
+ ...
+ -re "\r\n999\\^exit\r\n" { }
+ ...
+
+ Note that we're not parsing the thread-exited/thread-group-exited messages, because
+ they may not be present:
+ ...
+ $ gdb -i=mi
+ =thread-group-added,id="i1"
+ (gdb)
+ 999-gdb-exit
+ 999^exit
+ $
+ ...
+
+ After fixing that, we have:
+ ...
+ (gdb) ^M
+ saw mi error
+ PASS: gdb.mi/mi-exec-run.exp: inferior-tty=separate: mi=separate: \
+ force-fail=1: run failure detected
+ quit^M
+ &"quit\n"^M
+ ...
+
+ What seems to be happening is that default_gdb_exit sends a cli interpreter
+ quit command to an mi interpreter, after which again expect just waits for the
+ timeout.
+
+ Fix this by adding mi_gdb_exit to the end of the test-case, as in many other
+ gdb.mi/*.exp test-cases.
+
+ After these two fixes, the test-case takes about 4 seconds.
+
+ Tested on x86_64-linux.
+
+2022-10-27 Tom de Vries <tdevries@suse.de>
+
+ [gdb/testsuite] Use remote_exec chmod instead of remote_spawn
+ I build gdb using -O2, and ran the testsuite using taskset -c 0, and ran into:
+ ...
+ (gdb) PASS: gdb.server/connect-with-no-symbol-file.exp: sysroot=: \
+ action=delete: setup: adjust sysroot
+ builtin_spawn gdbserver --once localhost:2385 /connect-with-no-symbol-file^M
+ /bin/bash: connect-with-no-symbol-file: Permission denied^M
+ /bin/bash: line 0: exec: connect-with-no-symbol-file: cannot execute: \
+ Permission denied^M
+ During startup program exited with code 126.^M
+ Exiting^M
+ target remote localhost:2385^M
+ `connect-with-no-symbol-file' has disappeared; keeping its symbols.^M
+ localhost:2385: Connection timed out.^M
+ (gdb) FAIL: gdb.server/connect-with-no-symbol-file.exp: sysroot=: \
+ action=delete: connection to GDBserver succeeded
+ ...
+
+ The expected series of events is (skipping disconnect and detach as I don't
+ think they're relevant to the problem):
+ - enter scenario "permission"
+ - cp $exec.bak $exec
+ - gdbserver start with $exec
+ - chmod 000 $exec
+ - connect to gdbserver
+ - enter scenario "delete"
+ - cp $exec.bak $exec
+ - gdbserver start with $exec
+ - delete $exec
+ - connect to gdbserver
+
+ The problem is that the chmod is executed using remote_spawn:
+ ...
+ } elseif { $action == "permission" } {
+ remote_spawn target "chmod 000 $target_exec"
+ }
+ ...
+ without waiting on the resulting spawn id, so we're not sure when the
+ chmod will have effect.
+
+ The FAIL we're seeing above is explained by the chmod having effect during the
+ delete scenario, after the "cp $exec.bak $exec" and before the "gdbserver
+ start with $exec".
+
+ Fix this by using remote_exec instead.
+
+ Likewise, fix a similar case in gdb.mi/mi-exec-run.exp.
+
+ Tested on x86_64-linux.
+
+ Bug: https://sourceware.org/bugzilla/show_bug.cgi?id=29726
+
+2022-10-27 Nelson Chu <nelson@rivosinc.com>
+
+ RISC-V: Fix build failures for -Werror=sign-compare.
+ elfnn-riscv.c: In function ‘riscv_relax_resolve_delete_relocs’:
+ elfnn-riscv.c:4256:30: error: operand of ‘?:’ changes signedness from ‘int’ to ‘unsigned int’ due to unsignedness of other operand [-Werror=sign-compare]
+
+ So make the operands unsigned could resolve problem.
+
+ bfd/
+ * elfnn-riscv.c (riscv_relax_resolve_delete_relocs): Fixed build
+ failures for -Werror=sign-compare.
+
+2022-10-27 Alan Modra <amodra@gmail.com>
+
+ Fuzzed files in archives
+ Given a fuzzed object file in an archive with section size exceeding
+ file size, objcopy will report an error like "section size (0xfeffffff
+ bytes) is larger than file size (0x17a bytes)" but will create a copy
+ of the object laid out for the large section. That means a large
+ temporary file on disk that is read back and written to the output
+ archive, which can take a while. The output archive is then deleted
+ due to the error. Avoid some of this silliness.
+
+ * objcopy.c (copy_section): If section contents cannot be read
+ set output section size to zero.
+
+2022-10-27 Martin Liska <mliska@suse.cz>
+
+ tests: use canonical option name
+ ld/ChangeLog:
+
+ * testsuite/ld-size/size.exp: Use canonical option name.
+
+2022-10-27 Alan Modra <amodra@gmail.com>
+
+ re: Support Intel AMX-FP16
+ Fix these fails due to the target padding out sections with nops.
+ x86_64-w64-mingw32 +FAIL: x86_64 AMX-FP16 insns
+ x86_64-w64-mingw32 +FAIL: x86_64 AMX-FP16 insns (Intel disassembly)
+
+ * testsuite/gas/i386/x86-64-amx-fp16-intel.d: Accept trailing nops.
+ * testsuite/gas/i386/x86-64-amx-fp16.d: Likewise.
+
+2022-10-27 Alan Modra <amodra@gmail.com>
+
+ Re: ld/testsuite: adjust ld-arm to run shared tests only when supported
+ commit 67527cffcd enabled previously disabled tests unresolved-1-dyn,
+ thumb-plt and thumb-plt-got for nacl. The first fails due to trying
+ to link against mixed-lib.so which isn't compiled for nacl. The last
+ two fail with
+ objdump: tmpdir/dump(.rel.plt): relocation 0 has invalid symbol index 14885104
+ and
+ readelf: Error: bad symbol index: 00e320f0 in reloc
+
+ Relocation section '.rel.plt' at offset 0x128 contains 1 entry:
+ Offset Info Type Sym. Value Symbol's Name
+ e320f000 e320f000 R_ARM_NONE
+
+ * testsuite/ld-arm/arm-elf.exp: Disable unresolved-1-dyn,
+ thumb-plt and thumb-plt-got for nacl.
+
+2022-10-27 GDB Administrator <gdbadmin@sourceware.org>
+
+ Automatic date update in version.in
+
+2022-10-26 Simon Marchi <simon.marchi@efficios.com>
+
+ gdb/testsuite: fix gdb.guile/scm-parameter.exp "wrong type argument" test pattern for Guile >= 2.2
+ Since commit 90319cefe3 ("GDB/Guile: Don't assert that an integer value
+ is boolean"), I see:
+
+ FAIL: gdb.guile/scm-parameter.exp: kind=PARAM_ZINTEGER: test-PARAM_ZINTEGER-param: guile (set-parameter-value! test-PARAM_ZINTEGER-param #:unlimited)
+ FAIL: gdb.guile/scm-parameter.exp: kind=PARAM_ZUINTEGER: test-PARAM_ZUINTEGER-param: guile (set-parameter-value! test-PARAM_ZUINTEGER-param #:unlimited)
+
+ This comes from the fact that GDB outputs this:
+
+ ERROR: In procedure set-parameter-value!:
+ In procedure gdbscm_set_parameter_value_x: Wrong type argument in position 2 (expecting integer): #:unlimited
+ Error while executing Scheme code.
+
+ while the test expects an additional "ERROR:" on the second line,
+ something like this:
+
+ ERROR: In procedure set-parameter-value!:
+ ERROR: In procedure gdbscm_set_parameter_value_x: Wrong type argument in position 2 (expecting integer): #:unlimited
+ Error while executing Scheme code.
+
+ Guile 2.0 outputs the `ERROR:` on the second line, while later versions
+ do not. Change the pattern to accept both outputs. This is similar to
+ commit 6bbe1a929c6 ("[gdb/testsuite] Fix gdb.guile/scm-breakpoint.exp
+ with guile 3.0").
+
+ Change-Id: I9dc45e7492a4f08340cad974610242ed689de959
+
+2022-10-26 Luis Machado <luis.machado@arm.com>
+
+ gdb/arm: Fix M-profile EXC_RETURN
+ Arm v8-M Architecture Reference Manual,
+ D1.2.95 EXC_RETURN, Exception Return Payload
+ describes ES bit:
+
+ "ES, bit [0]
+ Exception Secure. The security domain the exception was taken to.
+ The possible values of this bit are:
+ 0 Non-secure.
+ 1 Secure"
+
+ arm-tdep.c:3443, arm_m_exception_cache () function tests this bit:
+
+ exception_domain_is_secure = (bit (lr, 0) == 0);
+
+ The test is negated!
+
+ Later on line 3553, the condition evaluates if an additional state
+ context is stacked:
+
+ /* With the Security extension, the hardware saves R4..R11 too. */
+ if (tdep->have_sec_ext && secure_stack_used
+ && (!default_callee_register_stacking || exception_domain_is_secure))
+
+ RM, B3.19 Exception entry, context stacking
+ reads:
+ RPLHM "In a PE with the Security Extension, on taking an exception,
+ the PE hardware:
+ ...
+ 2. If exception entry requires a transition from Secure state to
+ Non-secure state, the PE hardware extends the stack frame and also
+ saves additional state context."
+
+ So we should test for !exception_domain_is_secure instead of non-negated
+ value!
+ These two bugs compensate each other so unstacking works correctly.
+
+ But another test of exception_domain_is_secure (negated due to the
+ first bug) prevents arm_unwind_secure_frames to work as expected:
+
+ /* Unwinding from non-secure to secure can trip security
+ measures. In order to avoid the debugger being
+ intrusive, rely on the user to configure the requested
+ mode. */
+ if (secure_stack_used && !exception_domain_is_secure
+ && !arm_unwind_secure_frames)
+
+ Test with GNU gdb (GDB) 13.0.50.20221016-git.
+ Stopped in a non-secure handler:
+
+ (gdb) set arm unwind-secure-frames 0
+ (gdb) bt
+ #0 HAL_SYSTICK_Callback () at C:/dvl/stm32l5trustzone/GPIO_IOToggle_TrustZone/NonSecure/Src/nsmain.c:490
+ #1 0x0804081c in SysTick_Handler ()
+ at C:/dvl/stm32l5trustzone/GPIO_IOToggle_TrustZone/NonSecure/Src/nsstm32l5xx_it.c:134
+ #2 <signal handler called>
+ #3 HAL_GPIO_ReadPin (GPIOx=0x52020800, GPIO_Pin=8192)
+ at C:/dvl/stm32l5trustzone/GPIO_IOToggle_TrustZone/Drivers/STM32L5xx_HAL_Driver/Src/stm32l5xx_hal_gpio.c:386
+ #4 0x0c000338 in SECURE_Mode () at C:/dvl/stm32l5trustzone/GPIO_IOToggle_TrustZone/Secure/Src/main.c:86
+ #5 0x080403f2 in main () at C:/dvl/stm32l5trustzone/GPIO_IOToggle_TrustZone/NonSecure/Src/nsmain.c:278
+ Backtrace stopped: previous frame inner to this frame (corrupt stack?)
+
+ The frames #3 and #4 are secure. backtrace should stop before #3.
+
+ Stopped in a secure handler:
+
+ (gdb) bt
+ #0 HAL_SYSTICK_Callback () at C:/dvl/stm32l5trustzone/GPIO_IOToggle_TrustZone/Secure/Src/main.c:425
+ #1 0x0c000b6a in SysTick_Handler ()
+ at C:/dvl/stm32l5trustzone/GPIO_IOToggle_TrustZone/Secure/Src/stm32l5xx_it.c:234
+ warning: Non-secure to secure stack unwinding disabled.
+ #2 <signal handler called>
+
+ The exception from secure to secure erroneously stops unwinding. It should
+ continue as far as the security unlimited backtrace:
+
+ (gdb) set arm unwind-secure-frames 1
+ (gdb) si <-- used to rebuild frame cache after change of unwind-secure-frames
+ 0x0c0008e6 425 if (SecureTimingDelay != 0U)
+ (gdb) bt
+ #0 0x0c0008e6 in HAL_SYSTICK_Callback () at C:/dvl/stm32l5trustzone/GPIO_IOToggle_TrustZone/Secure/Src/main.c:425
+ #1 0x0c000b6a in SysTick_Handler ()
+ at C:/dvl/stm32l5trustzone/GPIO_IOToggle_TrustZone/Secure/Src/stm32l5xx_it.c:234
+ #2 <signal handler called>
+ #3 0x0c000328 in SECURE_Mode () at C:/dvl/stm32l5trustzone/GPIO_IOToggle_TrustZone/Secure/Src/main.c:88
+ #4 0x080403f2 in main () at C:/dvl/stm32l5trustzone/GPIO_IOToggle_TrustZone/NonSecure/Src/nsmain.c:278
+
+ Backtrace stopped: previous frame inner to this frame (corrupt stack?)
+
+ Set exception_domain_is_secure to the value expected by its name.
+ Fix exception_domain_is_secure usage in the additional state context
+ stacking condition.
+
+2022-10-26 Luis Machado <luis.machado@arm.com>
+
+ gdb/arm: fix IPSR field test in arm_m_exception_cache ()
+ Arm v8-M Architecture Reference Manual,
+ D1.2.141 IPSR, Interrupt Program Status Register reads
+ "Exception, bits [8:0]"
+
+ 9 bits, not 8! It is uncommon but true!
+
+2022-10-26 Luis Machado <luis.machado@arm.com>
+
+ gdb/arm: Terminate frame unwinding in M-profile lockup
+ In the lockup state the PC value of the the outer frame is irreversibly
+ lost. The other registers are intact so LR likely contains
+ PC of some frame next to the outer one, but we cannot analyze
+ the nearest outer frame without knowing its PC
+ therefore we do not know SP fixup for this frame.
+
+ The frame unwinder possibly gets mad due to the wrong SP value.
+ To prevent problems terminate unwinding if PC contains the magic
+ value of the lockup state.
+
+ Example session wihtout this change,
+ Cortex-M33 CPU in lockup, gdb 13.0.50.20221016-git:
+ ----------------
+ (gdb) c
+ Continuing.
+
+ Program received signal SIGINT, Interrupt.
+ 0xeffffffe in ?? ()
+ (gdb) bt
+ #0 0xeffffffe in ?? ()
+ #1 0x0c000a9c in HardFault_Handler ()
+ at C:/dvl/stm32l5trustzone/GPIO_IOToggle_TrustZone/Secure/Src/stm32l5xx_it.c:99
+ #2 0x2002ffd8 in ?? ()
+ Backtrace stopped: previous frame identical to this frame (corrupt stack?)
+ (gdb)
+ ----------------
+ The frame #1 is at correct PC taken from LR, #2 is a total nonsense.
+
+ With the change:
+ ----------------
+ (gdb) c
+ Continuing.
+
+ Program received signal SIGINT, Interrupt.
+ warning: ARM M in lockup state, stack unwinding terminated.
+ <signal handler called>
+ (gdb) bt
+ #0 <signal handler called>
+ (gdb)
+ ----------------
+
+ There is a visible drawback of emitting a warning in a cache buildnig routine
+ as introduced in Torbjörn SVENSSON's
+ [PATCH v4] gdb/arm: Stop unwinding on error, but do not assert
+ The warning is printed just once and not repeated on each backtrace command.
+
+2022-10-26 Mike Frysinger <vapier@gentoo.org>
+
+ gdb: copyright: make file header scan a bit more pythonic
+ Should be functionally the same, but uses more pythonic idioms to get
+ fewer lines of code, and to make sure to not leak open file handles.
+
+ Approved-By: Simon Marchi <simon.marchi@efficios.com>
+
+2022-10-26 Mike Frysinger <vapier@gentoo.org>
+
+ gdb: make copyright.py interface a bit nicer
+ This way people can run `./copyright.py --help` and get some info as
+ to what this does without it going and modifying the tree.
+
+ sim: testsuite: improve parallel test processing
+ The current logic limits itself to a maxdepth of 4 when looking for
+ results. This wouldn't be a problem if cris didn't have a testsuite
+ at a depth of 5 which we end up ignoring when summarizing. Rather
+ than bump the number from 4 to 5, rework the code so that we gather
+ the exact set of tests that we tried to run.
+
+2022-10-26 Alan Modra <amodra@gmail.com>
+
+ buffer overflow in _bfd_XX_print_ce_compressed_pdata
+ More fuzzed fun.
+
+ * peXXigen.c (_bfd_XX_print_ce_compressed_pdata): Use smaller of
+ virt_size and bfd section size as limit of function table.
+
+2022-10-26 Alan Modra <amodra@gmail.com>
+
+ Correct ELF reloc size sanity check
+ The external reloc size check was wrong. Here asect is the code/data
+ section, not the reloc section. So using this_hdr gave the size of
+ the code/data section.
+
+ * elf.c (_bfd_elf_get_reloc_upper_bound): Properly get
+ external size from reloc headers.
+
+2022-10-26 Alan Modra <amodra@gmail.com>
+
+ segfault in objdump.c reloc_at
+ bfd_canonicalize_reloc returns -1L on errors.
+
+ * objdump.c (load_specific_debug_section): Properly handle
+ error return from bfd_canonicalize_reloc.
+
+2022-10-26 Alan Modra <amodra@gmail.com>
+
+ som.c reloc sanity checking
+ This patch checks that relocations emitted in som_write_fixups have
+ offsets that are monotonic and within a section. To do that properly
+ using bfd_reloc_offset_in_range it is necessary to set the reloc howto
+ size field, which isn't used otherwise by the som backend. Note that
+ the sizes used are not exactly those in the old sizing switch
+ statement deleted from som_write_fixups, but all relocs handled by the
+ main switch statement there get the same size. Most unhandled relocs
+ get a zero size (exceptions being R_RELOCATION, R_SPACE_REF,
+ R_MILLI_REL, R_BREAKPOINT which all involve writing one word according
+ to my SOM reference). I figure it doesn't matter since any unhandled
+ reloc is converted to 0xff R_RESERVED, and a default of zero is better
+ for a "don't know" reloc.
+
+ Besides tidying the code, stringizing name from type in SOM_HOWTO
+ fixes R_REPEATED_INIT name.
+
+ * som.c (SOM_HOWTO): Add SIZE arg, delete NAME. Stringize type
+ to name.
+ (som_hppa_howto_table): Update with sizes.
+ (som_write_fixups): Delete sizing switch statement. Sanity check
+ bfd_reloc address against subsection size.
+
+2022-10-26 Alan Modra <amodra@gmail.com>
+
+ som.c buffer overflow
+ Fuzzed object files can put random values in bfd_reloc->address,
+ leading to large som_reloc_skip output.
+
+ * som.c (som_write_fixups): Allow for maximal som_reloc_skip.
+
+2022-10-26 Alan Modra <amodra@gmail.com>
+
+ PR29720, objdump -S crashes if build-id is missing
+ PR 29720
+ * objdump.c (slurp_file): Don't call debuginfod_find_source
+ when build_id is NULL.
+
+2022-10-26 GDB Administrator <gdbadmin@sourceware.org>
+
+ Automatic date update in version.in
+
+2022-10-25 Simon Marchi <simon.marchi@efficios.com>
+
+ gdb: remove spurious spaces after frame_info_ptr
+ Fix some whitespace issues introduced with the frame_info_ptr patch.
+
+ Change-Id: I158d30d8108c97564276c647fc98283ff7b12163
+
+2022-10-25 Michael Matz <matz@suse.de>
+
+ x86-64: Use only one default max-page-size
+ On x86-64 the default ELF_MAXPAGESIZE depends on a configure
+ option (--disable-separate-code). Since 9833b775
+ ("PR28824, relro security issues") we use max-page-size for relro
+ alignment (with a short interval, from 31b4d3a ("PR28824, relro
+ security issues, x86 keep COMMONPAGESIZE relro") to its revert
+ a1faa5ea, where x86-64 only used COMMONPAGESIZE as relro alignment
+ target).
+
+ But that means that a linker configured with --disable-separate-code
+ behaves different from one configured with --enable-separate-code
+ (the default), _even if using "-z {no,}separate-code" option to use
+ the non-configured behaviour_ . In particular it means that when
+ configuring with --disable-separate-code the linker will produce
+ binaries aligned to 2MB pages on disk, and hence generate 2MB
+ executables for a hello world (and even 6MB when linked with
+ "-z separate-code").
+
+ Generally we can't have constants that ultimately land in static
+ variables be depending on configure options if those only influence
+ behaviour that is overridable by command line options.
+
+ So, do away with that, make the default MAXPAGESIZE be 4k (as is default
+ for most x86-64 configs anyway, as most people won't configure with
+ --disable-separate-code). If people need more they can use the
+ "-z max-page-size" (with would have been required right now for a
+ default configure binutils).
+
+ bfd/
+ * elf64-x86-64.c (ELF_MAXPAGESIZE): Don't depend on
+ DEFAULT_LD_Z_SEPARATE_CODE.
+
+2022-10-25 Simon Marchi <simon.marchi@efficios.com>
+
+ gdb/testsuite: make sure to consume the prompt in gdb.base/unwind-on-each-insn.exp
+ This test fails quite reliably for me when ran as:
+
+ $ taskset -c 1 make check TESTS="gdb.base/unwind-on-each-insn.exp" RUNTESTFLAGS="--target_board=native-gdbserver"
+
+ or more simply:
+
+ $ make check-read1 TESTS="gdb.base/unwind-on-each-insn.exp"
+
+ The problem is that the gdb_test_multiple call that grabs the frame id
+ from "maint print frame-id" does not consume the prompt. Well, it does
+ sometimes due to the trailing .*, but not always. If the prompt is not
+ consumed, the tests that follow get confused:
+
+ FAIL: gdb.base/unwind-on-each-insn.exp: gdb_breakpoint: set breakpoint at *foo
+ FAIL: gdb.base/unwind-on-each-insn.exp: disassemble foo
+ FAIL: gdb.base/unwind-on-each-insn.exp: get $sp and frame base in foo: get hexadecimal valueof "$sp"
+ ... many more ...
+
+ Use -wrap to make gdb_test_multiple consume the prompt.
+
+ While at it, remove the bit that consumes the command name and do
+ exp_continue, it's not really necessary. And for consistency, do the
+ same changes to the gdb_test_multiple that consumes the stack address,
+ although that one was fine, it did consume the prompt explicitly.
+
+ Change-Id: I2b7328c8844c7e98921ea494c4c05107162619fc
+ Reviewed-By: Bruno Larsen <blarsen@redhat.com>
+
+2022-10-25 Tom de Vries <tdevries@suse.de>
+
+ [gdb/testsuite] Handle missing .note.GNU-stack
+ On openSUSE Tumbleweed I run into this for the dwarf assembly test-cases, and
+ some hardcoded assembly test-cases:
+ ...
+ Running gdb.dwarf2/fission-absolute-dwo.exp ...
+ gdb compile failed, ld: warning: fission-absolute-dwo.o: \
+ missing .note.GNU-stack section implies executable stack
+ ld: NOTE: This behaviour is deprecated and will be removed in a future \
+ version of the linker
+
+ === gdb Summary ===
+
+ # of untested testcases 1
+ ...
+
+ Fix the dwarf assembly test-cases by adding the missing .note.GNU-stack in
+ proc Dwarf::assemble.
+
+ Fix the hard-coded test-cases using this command:
+ ...
+ $ for f in $(find gdb/testsuite/gdb.* -name *.S); do
+ if ! grep -q note.GNU-stack $f; then
+ echo -e "\t.section\t.note.GNU-stack,\"\",@progbits" >> $f;
+ fi;
+ done
+ ...
+
+ Likewise for .s files, and gdb/testsuite/lib/my-syscalls.S.
+
+ The idiom for arm seems to be to use %progbits instead, see commit 9a5911c08be
+ ("gdb/testsuite/gdb.dwarf2: Replace @ with % for ARM compatability"), so
+ hand-edit gdb/testsuite/gdb.arch/arm-disp-step.S to use %progbits instead.
+
+ Note that dwarf assembly testcases use %progbits as decided by proc _section.
+
+ Tested on x86_64-linux.
+
+ Bug: https://sourceware.org/bugzilla/show_bug.cgi?id=29674
+
+2022-10-25 Tom de Vries <tdevries@suse.de>
+
+ [gdb/testsuite] Add missing skip_gdbserver_tests in gdb.multi/attach-no-multi-process.exp
+ I build gdb without gdbserver, and ran into:
+ ...
+ (gdb) PASS: gdb.multi/attach-no-multi-process.exp: target_non_stop=off: \
+ switch to inferior 2
+ spawn of --once --multi localhost:2346 failed
+ ERROR: tcl error sourcing attach-no-multi-process.exp.
+ ERROR: tcl error code NONE
+ ERROR: Timeout waiting for gdbserver response.
+ ...
+
+ Add the missing skip_gdbserver_tests.
+
+ Tested on x86_64-linux.
+
+2022-10-25 Tom de Vries <tdevries@suse.de>
+
+ [gdb] Rewrite RETHROW_ON_TARGET_CLOSE_ERROR into function
+ Recent commit b2829fcf9b5 ("[gdb] Fix rethrow exception slicing in
+ insert_bp_location") introduced macro RETHROW_ON_TARGET_CLOSE_ERROR.
+
+ I wrote this as a macro in order to have the rethrowing throw be part of the
+ same function as the catch, but as it turns out that's not necessary.
+
+ Rewrite into a function.
+
+ Tested on x86_64-linux.
+
+2022-10-25 Simon Marchi <simon.marchi@polymtl.ca>
+
+ gdb: internal_error -> internal_error_loc in gdb-gdb.gdb.in
+ Commit f34652de0b ("internal_error: remove need to pass
+ __FILE__/__LINE__") renamed the internal_error function to
+ internal_error_loc. Change gdb-gdb.gdb.in accordingly.
+
+ Change-Id: I876e1623607b6becf74ade53d102ead53a74ed86
+
+2022-10-25 Nelson Chu <nelson@rivosinc.com>
+
+ RISC-V: Should reset `again' flag for _bfd_riscv_relax_pc.
+ The R_RISCV_DELETE relocations are no longer deleted at another relax pass,
+ so we should reset 'again' flag to true for _bfd_riscv_relax_pc, while the
+ deleted bytes are marked as R_RISCV_DELETE.
+
+ bfd/
+ * elfnn-riscv.c (_bfd_riscv_relax_pc): Set `again' to true while the
+ deleted bytes are marked as R_RISCV_DELETE.
+
+2022-10-25 Patrick O'Neill <patrick@rivosinc.com>
+
+ RISC-V: Improve link time complexity.
+ The riscv port does deletion and symbol table update for each relocation
+ while relaxing, so we are moving section bytes and scanning symbol table once
+ for each relocation. Compared to microblaze port, they record the relaxation
+ changes into a table, then do the deletion and symbol table update once per
+ section, rather than per relocation. Therefore, they should have better link
+ time complexity than us.
+
+ To improve the link time complexity, this patch try to make the deletion in
+ linear time. Compared to record the relaxation changes into a table, we
+ replace the unused relocation with R_RISCV_DELETE for the deleted bytes, and
+ then resolve them at the end of the section. Assuming the number of
+ R_RISCV_DELETE is m, and the number of symbols is n, the total link complexity
+ should be O(m) for moving section bytes, and O(m*n^2) for symbol table update.
+ If we record the relaxation changes into the table, and then sort the symbol
+ table by values, then probably can reduce the time complexity to O(m*n*log(n))
+ for updating symbol table, but it doesn't seem worth it for now.
+
+ bfd/
+ * elfnn-riscv.c (_riscv_relax_delete_bytes): Renamed from
+ riscv_relax_delete_bytes, updated to reduce the tiem complexity to O(m)
+ for memmove.
+ (typedef relax_delete_t): Function pointer declaration of delete functions.
+ (riscv_relax_delete_bytes): Can choose to use _riscv_relax_delete_piecewise
+ or _riscv_relax_delete_immediate for deletion.
+ (_riscv_relax_delete_piecewise): Just mark the deleted bytes as R_RISCV_DELETE.
+ (_riscv_relax_delete_immediate): Delete some bytes from a section while
+ relaxing.
+ (riscv_relax_resolve_delete_relocs): Delete the bytes for R_RISCV_DELETE
+ relocations from a section, at the end of _bfd_riscv_relax_section.
+ (_bfd_riscv_relax_call): Mark deleted bytes as R_RISCV_DELETE by reusing
+ R_RISCV_RELAX.
+ (_bfd_riscv_relax_lui): Likewise, but reuse R_RISCV_HI20 for lui, and reuse
+ R_RISCV_RELAX for c.lui.
+ (_bfd_riscv_relax_tls_le): Likewise, but resue R_RISCV_TPREL_HI20 and
+ R_RISCV_TPREL_ADD.
+ (_bfd_riscv_relax_pc): Likewise, but resue R_RISCV_PCREL_HI20 for auipc.
+ (_bfd_riscv_relax_align): Updated, don't need to resue relocation since
+ calling _riscv_relax_delete_immediate.
+ (_bfd_riscv_relax_delete): Removed.
+ (_bfd_riscv_relax_section): Set riscv_relax_delete_bytes for each relax_func,
+ to delete bytes immediately or later. Call riscv_relax_resolve_delete_relocs
+ to delete bytes for DELETE relocations from a section.
+
+2022-10-25 GDB Administrator <gdbadmin@sourceware.org>
+
+ Automatic date update in version.in
+
+2022-10-24 Andrew Burgess <aburgess@redhat.com>
+
+ gdb/doc: reword description of DisassembleInfo.read_memory
+ While reading the documentation of DisassembleInfo.read_memory I
+ spotted the word 'available' in one sentence where it didn't make
+ sense.
+
+2022-10-24 Andrew Burgess <aburgess@redhat.com>
+
+ sim/lm32: fix some missing function declaration warnings
+ In the lm32 simulator, I was seeing some warnings about missing
+ function declarations.
+
+ The lm32 simulator has a weird header structure, in order to pull in
+ the full cpu.h header we need to define WANT_CPU_LM32BF. This is done
+ in some files, but not in others. Critically, it's not done in some
+ files that then use functions declared in cpu.h
+
+ In this commit I added the missing #define so that the full cpu.h can
+ be included.
+
+ After doing this there are still a few functions that are used
+ undeclared, these functions appear to be missing any declarations at
+ all, so I've added some to cpu.h.
+
+ With this done all the warnings when compiling lm32 are resolved for
+ both gcc and clang, so I've removed the SIM_WERROR_CFLAGS line from
+ Makefile.in, this allows lm32 to build with -Werror.
+
+2022-10-24 Andrew Burgess <aburgess@redhat.com>
+
+ sim/h8300: avoid self assignment
+ There are two places in the h8300 simulator where we assign a variable
+ to itself. Clang gives a warning for this, which is converted into an
+ error by -Werror.
+
+ Silence the warning by removing the self assignments. As these
+ assignments were in a complex if/then/else tree, rather than try to
+ adjust all the conditions, I've just replaced the self assignments
+ with a comment and an empty statement.
+
+2022-10-24 Andrew Burgess <aburgess@redhat.com>
+
+ sim/aarch64: remove two unused functions
+ These functions are not used. Clang warns about the unused functions,
+ which is then converted into an error by -Werror.
+
+ Delete the unused functions.
+
+2022-10-24 Andrew Burgess <aburgess@redhat.com>
+
+ sim/ppc: fix for operator precedence warning from clang
+ In the ppc simulator, clang was warning about some code like this:
+
+ busy_ptr->nr_writebacks = 1 + (PPC_ONE_BIT_SET_P(out_vmask)) ? 1 : 2;
+
+ The warning was:
+
+ operator '?:' has lower precedence than '+'; '+' will be evaluated first
+
+ I suspect that this is not the original authors intention.
+ PPC_ONE_BIT_SET_P is going to be 0 or 1, so if we evaluate the '+'
+ first, the condition will always be non-zero, so true. The whole
+ expression could then be simplified to just '1', which doesn't make
+ much sense.
+
+ I suspect the answer the author was expecting was either 2 or 3. Why
+ they didn't just write:
+
+ busy_ptr->nr_writebacks = (PPC_ONE_BIT_SET_P(out_vmask)) ? 2 : 3;
+
+ I have no clue, however, to keep the structure of the code unchanged,
+ I've updated things to:
+
+ busy_ptr->nr_writebacks = 1 + (PPC_ONE_BIT_SET_P (out_vmask) ? 1 : 2);
+
+ which silences the warning from clang, and is, I am guessing, what the
+ original author intended.
+
+2022-10-24 Andrew Burgess <aburgess@redhat.com>
+
+ sim/ppc: initialize a memory buffer in all cases
+ In the ppc simulator's do_fstat function, which provides the fstat
+ call for the simulator, if the fstat is going to fail then we
+ currently write an uninitialized buffer into the simulated target.
+
+ In theory, I think this is fine, we also write the error status into
+ the simulated target, so, given that the fstat has failed, the target
+ shouldn't be relying on the buffer contents.
+
+ However, writing an uninitialized buffer means we might leak simulator
+ private data into the simulated target, which is probably a bad thing.
+ Plus it probably makes life easier if something consistent, like all
+ zeros, is written rather than random junk, which might look like a
+ successful call (except for the error code).
+
+ So, in this commit, I initialize the stat buffer to zero before
+ it is potentially used. If the stat call is not made then the buffer
+ will be left initialized as all zeros.
+
+2022-10-24 Andrew Burgess <aburgess@redhat.com>
+
+ sim/ppc: don't try to print an uninitialized variable
+ The ppc simulator, in sim_create_inferior, tries to print the function
+ local entry_point variable before the variable is initialized.
+
+ In this commit, I defer the debug print line until the variable has
+ been initialized.
+
+2022-10-24 Andrew Burgess <aburgess@redhat.com>
+
+ sim/sh: use fabs instead of abs
+ The sh simulator incorrectly uses integer abs instead of the floating
+ point fabs on some floating point values, fixed in this commit.
+
+2022-10-24 Tom de Vries <tdevries@suse.de>
+
+ [gdb] Fix rethrow exception slicing in insert_bp_location
+ The preferred way of rethrowing an exception is by using throw without
+ expression, because it avoids object slicing of the exception [1].
+
+ Fix this in insert_bp_location.
+
+ Tested on x86_64-linux.
+
+ [1] https://en.cppreference.com/w/cpp/language/throw
+
+ Approved-By: Andrew Burgess <aburgess@redhat.com>
+
+2022-10-24 Tom de Vries <tdevries@suse.de>
+
+ [gdb] Fix rethrow exception slicing in pretty_print_insn
+ The preferred way of rethrowing an exception is by using throw without
+ expression, because it avoids object slicing of the exception [1].
+
+ Fix this in gdb_pretty_print_disassembler::pretty_print_insn.
+
+ Tested on x86_64-linux.
+
+ [1] https://en.cppreference.com/w/cpp/language/throw
+
+ Approved-By: Andrew Burgess <aburgess@redhat.com>
+
+2022-10-24 Clément Chigot <chigot@adacore.com>
+
+ ld/testsuite: adjust ld-arm to run shared tests only when supported
+ If a custom arm-elf target is disabling the shared support, a lot of
+ failures are reported by the testsuite.
+ Moreover, some tests try to access libraries which have been explicitly
+ skipped earlier (eg mixed-lib.so).
+
+ ld/ChangeLog:
+
+ * testsuite/ld-arm/arm-elf.exp: Separate tests needing shared
+ lib support.
+
+2022-10-24 Clément Chigot <chigot@adacore.com>
+
+ ld/testsuite: skip ld-elf/exclude when -shared is not supported
+ ld/ChangeLog:
+
+ * testsuite/ld-elf/exclude.exp: Call check_shared_lib_support.
+ to skip for all targets without shared lib support.
+
+2022-10-24 Jan Beulich <jbeulich@suse.com>
+
+ x86: consolidate VPCLMUL tests
+ There's little point in having Intel syntax disassembler tests when the
+ purpose of a test is assembler functionality: Drop all
+ *avx512*_vpclmulqdq-wig1-intel.
+
+ For *avx512*_vpclmulqdq-wig1 share source with *avx512*_vpclmulqdq.
+
+ Finally put in place similar tests for -mvexwig=1.
+
+2022-10-24 Jan Beulich <jbeulich@suse.com>
+
+ x86: consolidate VAES tests
+ There's little point in having Intel syntax disassembler tests when the
+ purpose of a test is assembler functionality: Drop all
+ *avx512*_vaes-wig1-intel.
+
+ For *avx512*_vaes-wig1 share source with *avx512*_vaes. This in
+ particular makes sure that the 32-bit VL test actually tests any EVEX
+ encodings in the first place.
+
+ Finally put in place similar tests for -mvexwig=1.
+
+2022-10-24 Jan Beulich <jbeulich@suse.com>
+
+ x86: emit {evex} prefix when disassembling ambiguous AVX512VL insns
+ When no AVX512-specific functionality is in use, the disassembly of
+ AVX512VL insns is indistinguishable from their AVX counterparts (if such
+ exist). Emit the {evex} pseudo-prefix in such cases.
+
+ Where applicable drop stray uses of PREFIX_OPCODE from table entries.
+
+2022-10-24 Tom de Vries <tdevries@suse.de>
+
+ [gdb/testsuite] Add skip_python_tests in gdb.python/tui-window-names.exp
+ I did a gdb build without python support, and during testing ran into FAILs in
+ test-case gdb.python/tui-window-names.exp.
+
+ Fix this by adding the missing skip_python_test.
+
+ Tested on x86_64-linux.
+
+2022-10-24 GDB Administrator <gdbadmin@sourceware.org>
+
+ Automatic date update in version.in
+
+2022-10-23 Mike Frysinger <vapier@gentoo.org>
+
+ sim: testsuite: update ignored .exp files [PR sim/29596]
+ Now that we run `check/foo.exp` instead of `check/./foo.exp`,
+ update the config/ & lib/ exceptions to cover both paths.
+
+ Bug: https://sourceware.org/PR29596
+
+2022-10-23 Mike Frysinger <vapier@gentoo.org>
+
+ sim: testsuite: tweak parallel find invocation [PR sim/29596]
+ Make sure we invoke runtest with the same exp filenames when running in
+ parallel as it will find when run single threaded. When `runtest` finds
+ files itself, it will use paths like "aarch64/allinsn.exp". When we run
+ `find .` with the %p option, it produces "./aarch64/allinsn.exp". Switch
+ to %P to get "aarch64/allinsn.exp".
+
+ Bug: https://sourceware.org/PR29596
+
+2022-10-23 Mike Frysinger <vapier@gentoo.org>
+
+ sim: mips/ppc/riscv: re-add AC_CANONICAL_SYSTEM [PR sim/29439]
+ These configure scripts check $target and change behavior. They
+ shouldn't be doing that, but until we can rework the sim to change
+ behavior based on the input ELF, restore AC_CANONICAL_SYSTEM to
+ these so that $target is correctly populated.
+
+ This was lost in the d3562f83a7b8a1ae6e333cd5561419d3da18fcb4
+ ("sim: unify toolchain probing logic") refactor as the logic was
+ hoisted up to the common code. But the fact the vars weren't
+ passed down to the sub-configure scripts was missed.
+
+ Bug: https://sourceware.org/PR29439
+
+2022-10-23 GDB Administrator <gdbadmin@sourceware.org>
+
+ Automatic date update in version.in
+
+2022-10-22 Simon Marchi <simon.marchi@polymtl.ca>
+
+ gdb/testsuite: add max number of instructions check in gdb.base/unwind-on-each-insn.exp
+ This test sends my CI in an infinite loop of failures. We expect to
+ have a handful of iterations (5 on my development machine, where the
+ test passes fine)but the log shows that it went up to 104340 iterations:
+
+ FAIL: gdb.base/unwind-on-each-insn.exp - instruction 104340: maint print frame-id
+ DUPLICATE: gdb.base/unwind-on-each-insn.exp - instruction 104340: maint print frame-id
+ FAIL: gdb.base/unwind-on-each-insn.exp - instruction 104340: [string equal $fid $main_fid]
+ FAIL: gdb.base/unwind-on-each-insn.exp - instruction 104340: get hexadecimal valueof "$pc"
+
+ Add a max instruction check, exit the loop if we reach 100 iterations.
+ This should allow the test to fail fast if there's a problem, but 100
+ iterations should be more than enough for when things are working.
+
+ Change-Id: I77978d593aca046068f9209272d82e1675ba17c2
+
+2022-10-22 GDB Administrator <gdbadmin@sourceware.org>
+
+ Automatic date update in version.in
+
+2022-10-21 Pedro Alves <pedro@palves.net>
+
+ Improve Python Unwinders documentation
+ - avoid "GDB proper" to refer to global locus, as object files and
+ program spaces are also GDB proper.
+
+ - gdb.register_unwinder does not accept locus=gdb.
+
+ - "a unwinder" -> "an unwinder"
+
+ Approved-by: Eli Zaretskii <eliz@gnu.org>
+ Change-Id: I98c1b1000e1063815238e945ca71ec6f37b5702e
+
+2022-10-21 Simon Marchi <simon.marchi@polymtl.ca>
+
+ gdb: make inherit_abstract_dies use vector iterators
+ Small cleanup to use std::vector iterators rather than raw pointers.
+
+ Approved-By: Tom Tromey <tom@tromey.com>
+ Change-Id: I8d50dbb3f2d8dad7ff94066a578d523f1f31b590
+
+2022-10-21 Simon Marchi <simon.marchi@polymtl.ca>
+
+ gdb: check for empty offsets vector in inherit_abstract_dies
+ When building GDB with clang and --enable-ubsan, I get:
+
+ UNRESOLVED: gdb.dwarf2/frame-inlined-in-outer-frame.exp: starti prompt
+
+ The cause being:
+
+ $ ./gdb --data-directory=data-directory -nx -q -readnow testsuite/outputs/gdb.dwarf2/frame-inlined-in-outer-frame/frame-inlined-in-outer-frame
+ Reading symbols from testsuite/outputs/gdb.dwarf2/frame-inlined-in-outer-frame/frame-inlined-in-outer-frame...
+ Expanding full symbols from testsuite/outputs/gdb.dwarf2/frame-inlined-in-outer-frame/frame-inlined-in-outer-frame...
+ /home/simark/src/binutils-gdb/gdb/dwarf2/read.c:11954:47: runtime error: applying non-zero offset 8 to null pointer
+
+ I found this to happen with ld-linux on at least Arch Linux and Ubuntu
+ 22.04:
+
+ $ ./gdb --data-directory=data-directory -nx -q -readnow -iex "set debuginfod enabled on" /lib64/ld-linux-x86-64.so.2
+ Reading symbols from /lib64/ld-linux-x86-64.so.2...
+ Reading symbols from /home/simark/.cache/debuginfod_client/22bd7a2c03d8cfc05ef7092bfae5932223189bc1/debuginfo...
+ Expanding full symbols from /home/simark/.cache/debuginfod_client/22bd7a2c03d8cfc05ef7092bfae5932223189bc1/debuginfo...
+ /home/simark/src/binutils-gdb/gdb/dwarf2/read.c:11954:47: runtime error: applying non-zero offset 8 to null pointer
+
+ The problem happens when doing this:
+
+ sect_offset *offsetp = offsets.data () + 1
+
+ When `offsets` is an empty vector, `offsets.data ()` returns nullptr.
+ Fix it by wrapping that in a `!offsets.empty ()` check.
+
+ Change-Id: I6d29ba2fe80ba4308f68effd9c57d4ee8d67c29f
+ Approved-By: Tom Tromey <tom@tromey.com>
+
+2022-10-21 Fangrui Song <maskray@google.com>
+
+ readelf: support zstd compressed debug sections [PR 29640]
+
+2022-10-21 Tom Tromey <tromey@adacore.com>
+
+ Fix incorrect .gdb_index with new DWARF scanner
+ PR symtab/29694 points out a regression caused by the new DWARF
+ scanner when the cc-with-gdb-index target board is used.
+
+ What happens here is that an older version of gdb will make an index
+ describing the "A" type as:
+
+ [737] A: 1 [global, type]
+
+ whereas the new gdb says:
+
+ [1008] A: 0 [global, type]
+
+ Here the old one is correct because the A in CU 0 is just a
+ declaration without a size:
+
+ <1><45>: Abbrev Number: 10 (DW_TAG_structure_type)
+ <46> DW_AT_name : A
+ <48> DW_AT_declaration : 1
+ <48> DW_AT_sibling : <0x6d>
+
+ This patch fixes the problem by introducing the idea of a "type
+ declaration". I think gdb still needs to recurse into these types,
+ searching for methods, but by marking the type itself as a
+ declaration, gdb can skip this type during lookups and when writing
+ the index.
+
+ Regression tested on x86-64 using the cc-with-gdb-index board.
+
+ Bug: https://sourceware.org/bugzilla/show_bug.cgi?id=29694
+
+2022-10-21 Tom Tromey <tromey@adacore.com>
+
+ Fix crash in value_print_array_elements
+ A user noticed that gdb would crash when printing a packed array after
+ doing "set lang c". Packed arrays don't exist in C, but it's
+ occasionally useful to print things in C mode when working in a non-C
+ language -- this lets you see under the hood a little bit.
+
+ The bug here is that generic value printing does not handle packed
+ arrays at all. This patch fixes the bug by introducing a new function
+ to extract a value from a bit offset and width.
+
+ The new function includes a hack to avoid problems with some existing
+ test cases when using -fgnat-encodings=all. Cleaning up this code
+ looked difficult, and since "all" is effectively deprecated, I thought
+ it made sense to simply work around the problems.
+
+2022-10-21 Tom Tromey <tromey@adacore.com>
+
+ Fix bug in Ada packed array handling
+ A user found a bug where an array of packed arrays was printed
+ incorrectly. The bug here is that the packed array has a bit stride,
+ but the outer array does not -- and should not. However,
+ update_static_array_size does not distinguish between an array of
+ packed arrays and a multi-dimensional packed array, and for the
+ latter, only the innermost array will end up with a stride.
+
+ This patch fixes the problem by adding a flag to indicate whether a
+ given array type is a constituent of a multi-dimensional array.
+
+2022-10-21 Simon Marchi <simon.marchi@polymtl.ca>
+
+ gdb: declare variables on first use in inherit_abstract_dies
+ Move variable declarations to where they are first use, plus some random
+ style fixes.
+
+ Change-Id: Idf40d60f9034996fa6a234165cd989a721eb4148
+
+2022-10-21 Nick Clifton <nickc@redhat.com>
+
+ Add a -w option to the linker to suppress warning and error messages.
+ PR 29654
+ * ld.h (struct ld_config_type): Add no_warnings field.
+ * ldlex.h (enum option_values): Add OPTION_NO_WARNINGS.
+ * lexsup.c (ld_options): Add --no-warnings.
+ (parse_args): Add support for -w and --no-warnings.
+ * ldmisc.c (vfinfo): Return early if the message is a warning and
+ -w has been enabled.
+ * ld.texi (options): Document new command line option.
+ * NEWS: Mention the new feature.
+
+ Add a note to the binutils/NEWS file about DCO signed contributions.
+
+2022-10-21 Bruno Larsen <blarsen@redhat.com>
+
+ gdb/reverse: Fix stepping over recursive functions
+ Currently, when using GDB to do reverse debugging, if we try to use the
+ command "reverse next" to skip a recursive function, instead of skipping
+ all of the recursive calls and stopping in the previous line, we stop at
+ the second to last recursive call, and need to manually step backwards
+ until we leave the first call. This is well documented in PR gdb/16678.
+
+ This bug happens because when GDB notices that a reverse step has
+ entered into a function, GDB will add a step_resume_breakpoint at the
+ start of the function, then single step out of the prologue once that
+ breakpoint is hit. The problem was happening because GDB wouldn't give
+ that step_resume_breakpoint a frame-id, so the first time the breakpoint
+ was hit, the inferior would be stopped. This is fixed by giving the
+ current frame-id to the breakpoint.
+
+ This commit also changes gdb.reverse/step-reverse.c to contain a
+ recursive function and attempt to both, skip it altogether, and to skip
+ the second call from inside the first call, as this setup broke a
+ previous version of the patch.
+
+2022-10-21 Bruno Larsen <blarsen@redhat.com>
+
+ Change calculation of frame_id by amd64 epilogue unwinder
+ When GDB is stopped at a ret instruction and no debug information is
+ available for unwinding, GDB defaults to the amd64 epilogue unwinder, to
+ be able to generate a decent backtrace. However, when calculating the
+ frame id, the epilogue unwinder generates information as if the return
+ instruction was the whole frame.
+
+ This was an issue especially when attempting to reverse debug, as GDB
+ would place a step_resume_breakpoint from the epilogue of a function if
+ we were to attempt to skip that function, and this breakpoint should
+ ideally have the current function's frame_id to avoid other problems
+ such as PR record/16678.
+
+ This commit changes the frame_id calculation for the amd64 epilogue,
+ so that it is always the same as the dwarf2 unwinder's frame_id.
+
+ It also adds a test to confirm that the frame_id will be the same,
+ regardless of using the epilogue unwinder or not, thanks to Andrew
+ Burgess.
+
+ Co-Authored-By: Andrew Burgess <aburgess@redhat.com>
+
+2022-10-21 Nick Clifton <nickc@redhat.com>
+
+ Updated Hungarian translation for the gprof sub-directory.
+ * po/hu.po: Updated Hungarian translation.
+
+2022-10-21 Maciej W. Rozycki <macro@embecosm.com>
+
+ GDB/Python: Make `None' stand for `unlimited' in setting integer parameters
+ Similarly to booleans and following the fix for PR python/29217 make
+ `gdb.parameter' accept `None' for `unlimited' with parameters of the
+ PARAM_UINTEGER, PARAM_INTEGER, and PARAM_ZUINTEGER_UNLIMITED types, as
+ `None' is already returned by parameters of the two former types, so
+ one might expect to be able to feed it back. It also makes it possible
+ to avoid the need to know what the internal integer representation is
+ for the special setting of `unlimited'.
+
+ Expand the testsuite accordingly.
+
+ Approved-By: Simon Marchi <simon.marchi@polymtl.ca>
+
+2022-10-21 Maciej W. Rozycki <macro@embecosm.com>
+
+ GDB/testsuite: Expand Python integer parameter coverage across all types
+ Also verify PARAM_UINTEGER, PARAM_INTEGER, and PARAM_ZINTEGER parameter
+ types, in addition to PARAM_ZUINTEGER and PARAM_ZUINTEGER_UNLIMITED
+ already covered, and verify a choice of existing GDB parameters. Add
+ verification for reading parameters via `<parameter>.value' in addition
+ to `gdb.parameter('<parameter>')' as this covers different code paths.
+
+ Approved-By: Simon Marchi <simon.marchi@polymtl.ca>
+
+2022-10-21 Maciej W. Rozycki <macro@embecosm.com>
+
+ GDB/Guile: Don't assert that an integer value is boolean
+ Do not assert that a value intended for an integer parameter, of either
+ the PARAM_UINTEGER or the PARAM_ZUINTEGER_UNLIMITED type, is boolean,
+ causing error messages such as:
+
+ ERROR: In procedure make-parameter:
+ ERROR: In procedure gdbscm_make_parameter: Wrong type argument in position 15 (expecting integer or #:unlimited): 3
+ Error while executing Scheme code.
+
+ when initialization with a number is attempted. Instead assert that it
+ is integer. Keep matching `#:unlimited' keyword as an alternative. Add
+ suitable test cases.
+
+ Approved-By: Simon Marchi <simon.marchi@polymtl.ca>
+
+2022-10-21 Tom de Vries <tdevries@suse.de>
+
+ [gdb/testsuite] Silence compilation fail in gdb.base/rtld-step.exp
+ With gcc 7.5.0 and test-case gdb.base/rtld-step.exp, I run into:
+ ...
+ gdb compile failed, gcc: error: unrecognized command line option \
+ '-static-pie'; did you mean '-static'?
+ ...
+
+ Silence this by checking in the test-case that -static-pie is supported, and
+ emitting instead:
+ ...
+ UNTESTED: gdb.base/rtld-step.exp: \
+ failed to compile (-static-pie not supported or static libc missing)
+ ...
+
+ Tested on x86_64-linux, with:
+ - gcc 7.5.0: UNTESTED
+ - gcc 12.2.1 with static glibc not installed: UNTESTED
+ - gcc 12.2.1 with static glibc installed: PASS
+
+2022-10-21 Cui,Lili <lili.cui@intel.com>
+
+ Support Intel AMX-FP16
+ gas/
+
+ * NEWS: Add support for Intel AMX-FP16 instruction.
+ * config/tc-i386.c: Add amx_fp16.
+ * doc/c-i386.texi: Document .amx_fp16.
+ * testsuite/gas/i386/i386.exp: Add AMX-FP16 tests.
+ * testsuite/gas/i386/x86-64-amx-fp16-intel.d: New test.
+ * testsuite/gas/i386/x86-64-amx-fp16.d: Likewise.
+ * testsuite/gas/i386/x86-64-amx-fp16.s: Likewise.
+ * testsuite/gas/i386/x86-64-amx-fp16-bad.d: Likewise.
+ * testsuite/gas/i386/x86-64-amx-fp16-bad.s: Likewise.
+
+ opcodes/
+
+ * i386-dis.c (MOD_VEX_0F385C_X86_64_P_3_W_0): New.
+ (VEX_LEN_0F385C_X86_64_P_3_W_0_M_0): Likewise.
+ (VEX_W_0F385C_X86_64_P_3): Likewise.
+ (prefix_table): Add VEX_W_0F385C_X86_64_P_3.
+ (vex_len_table): Add VEX_LEN_0F385C_X86_64_P_3_W_0_M_0.
+ (vex_w_table): Add VEX_W_0F385C_X86_64_P_3.
+ (mod_table): Add MOD_VEX_0F385C_X86_64_P_3_W_0.
+ * i386-gen.c (cpu_flag_init): Add AMX-FP16_FLAGS.
+ (CPU_ANY_AMX_TILE_FLAGS): Add CpuAMX_FP16.
+ (cpu_flags): Add CpuAMX-FP16.
+ * i386-opc.h (enum): Add CpuAMX-FP16.
+ (i386_cpu_flags): Add cpuamx_fp16.
+ * i386-opc.tbl: Add Intel AMX-FP16 instruction.
+ * i386-init.h: Regenerate.
+ * i386-tbl.h: Likewise.
+
+2022-10-21 Tsukasa OI <research_trasio@irq.a4lg.com>
+
+ sim: Remove unused CXXFLAGS substitution
+ Not only that sim/configure.ac does not AC_SUBST CXXFLAGS,
+ unless we need C++ compiler like CXX, substitution @CXXFLAGS@ is useless.
+ Because of this, this commit removes this substitution.
+
+2022-10-21 GDB Administrator <gdbadmin@sourceware.org>
+
+ Automatic date update in version.in
+
+2022-10-20 H.J. Lu <hjl.tools@gmail.com>
+
+ x86: Check VEX/EVEX encoding before checking vector operands
+ Since
+
+ commit 837e225ba1992f9745e5bbbd5e8443243a7f475f
+ Author: Jan Beulich <jbeulich@suse.com>
+ Date: Thu Oct 20 10:01:12 2022 +0200
+
+ x86: re-work AVX-VNNI support
+
+ moved AVX-VNNI after AVX512-VNNI, vector Disp8 is applied even when VEX
+ encoding is selected. Check VEX/EVEX encoding before checking vector
+ operands to avoid vector Disp8 with VEX encoding.
+
+ PR gas/29708
+ * config/tc-i386.c (match_template): Check VEX/EVEX encoding
+ before checking vector operands.
+ * testsuite/gas/i386/avx-vnni.d: Updated.
+ * testsuite/gas/i386/x86-64-avx-vnni.d: Likewise.
+ * testsuite/gas/i386/avx-vnni.s: Add a Disp32 test.
+ * testsuite/gas/i386/x86-64-avx-vnni.s: Likewise.
+
+2022-10-20 Andrew Burgess <aburgess@redhat.com>
+
+ gdb/python: break more dependencies between gdbpy_initialize_* functions
+ In a later commit in this series I will propose removing all of the
+ explicit gdbpy_initialize_* calls from python.c and replace these
+ calls with a more generic mechanism.
+
+ One of the side effects of this generic mechanism is that the order in
+ which the various Python sub-systems within GDB are initialized is no
+ longer guaranteed.
+
+ On the whole I don't think this matters, most of the sub-systems are
+ independent of each other, though testing did reveal a few places
+ where we did have dependencies, though I don't think those
+ dependencies were explicitly documented in comment anywhere.
+
+ This commit is similar to the previous one, and fixes the second
+ dependency issue that I found.
+
+ In this case the finish_breakpoint_object_type uses the
+ breakpoint_object_type as its tp_base, this means that
+ breakpoint_object_type must have been initialized with a call to
+ PyType_Ready before finish_breakpoint_object_type can be initialized.
+
+ Previously we depended on the ordering of calls to
+ gdbpy_initialize_breakpoints and gdbpy_initialize_finishbreakpoints in
+ python.c.
+
+ After this commit a new function gdbpy_breakpoint_init_breakpoint_type
+ exists, this function ensures that breakpoint_object_type has been
+ initialized, and can be called from any gdbpy_initialize_* function.
+
+ I feel that this change makes the dependency explicit, which I think
+ is a good thing.
+
+ There should be no user visible changes after this commit.
+
+2022-10-20 Andrew Burgess <aburgess@redhat.com>
+
+ gdb/python: break dependencies between gdbpy_initialize_* functions
+ In a later commit in this series I will propose removing all of the
+ explicit gdbpy_initialize_* calls from python.c and replace these
+ calls with a more generic mechanism.
+
+ One of the side effects of this generic mechanism is that the order in
+ which the various Python sub-systems within GDB are initialized is no
+ longer guaranteed.
+
+ On the whole I don't think this matters, most of the sub-systems are
+ independent of each other, though testing did reveal a few places
+ where we did have dependencies, though I don't think those
+ dependencies were explicitly documented in a comment anywhere.
+
+ This commit removes the first dependency issue, with this and the next
+ commit, all of the implicit inter-sub-system dependencies will be
+ replaced by explicit dependencies, which will allow me to, I think,
+ clean up how the sub-systems are initialized.
+
+ The dependency is around the py_insn_type. This type is setup in
+ gdbpy_initialize_instruction and used in gdbpy_initialize_record.
+ Rather than depend on the calls to these two functions being in a
+ particular order, in this commit I propose adding a new function
+ py_insn_get_insn_type. This function will take care of setting up the
+ py_insn_type type and calling PyType_Ready. This helper function can
+ be called from gdbpy_initialize_record and
+ gdbpy_initialize_instruction, and the py_insn_type will be initialized
+ just once.
+
+ To me this is better, the dependency is now really obvious, but also,
+ we no longer care in which order gdbpy_initialize_record and
+ gdbpy_initialize_instruction are called.
+
+ There should be no user visible changes after this commit.
+
+2022-10-20 Andrew Burgess <aburgess@redhat.com>
+
+ gdb: some int to bool conversion in breakpoint.c
+ Some int to bool conversion in breakpoint.c. I've only updated the
+ function signatures of static functions, but I've updated some
+ function local variables throughout the file.
+
+ There should be no user visible changes after this commit.
+
+ Approved-By: Simon Marchi <simon.marchi@efficios.com>
+
+2022-10-20 Andrew Burgess <aburgess@redhat.com>
+
+ gdb: make use of scoped_restore in unduplicated_should_be_inserted
+ I noticed that we could make use of a scoped_restore in the function
+ unduplicated_should_be_inserted. I've also converted the function
+ return type from int to bool.
+
+ This change shouldn't make any difference, as I don't think anything
+ within should_be_inserted could throw an exception, but the change
+ doesn't hurt, and will help keep us safe if anything ever changes in
+ the future.
+
+ Approved-By: Simon Marchi <simon.marchi@efficios.com>
+
+2022-10-20 Andrew Burgess <aburgess@redhat.com>
+
+ gdb: used scoped_restore_frame in update_watchpoint
+ I was doing some int to bool cleanup in update_watchpoint, and I
+ noticed a manual version of scoped_restore_selected_frame. As always
+ when these things are done manually, there is the chance that, in an
+ error case, we might leave the wrong frame selected.
+
+ This commit updates things to use scoped_restore_selected_frame, and
+ also converts a local variable from int to bool.
+
+ The only user visible change after this commit is in the case where
+ update_watchpoint throws an error - we should now correctly restore
+ the previously selected frame. Otherwise, this commit should be
+ invisible to the user.
+
+ Approved-By: Simon Marchi <simon.marchi@efficios.com>
+
+2022-10-20 Andrew Burgess <aburgess@redhat.com>
+
+ gdb: make some bp_location arguments const in breakpoint.c
+ I spotted a few places where I could make some 'bp_location *'
+ arguments constant in breakpoint.c.
+
+ There should be no user visible changes after this commit.
+
+ Approved-By: Simon Marchi <simon.marchi@efficios.com>
+
+2022-10-20 Дилян Палаузов <dilyan.palauzov@aegee.org>
+
+ Reapply "Don't build readline/libreadline.a, when --with-system-readline is supplied"
+ Commit 228cf97dd3c8 ("Merge configure.ac from gcc project") undid the
+ change originally done in commit 69961a84c9b ("Don't build
+ readline/libreadline.a, when --with-system-readline is supplied").
+ Re-apply it.
+
+ Bug: https://sourceware.org/bugzilla/show_bug.cgi?id=18632
+
+2022-10-20 Jan Beulich <jbeulich@suse.com>
+
+ x86: re-work AVX-VNNI support
+ By putting the templates after their AVX512 counterparts, the AVX512
+ flavors will be picked by default. That way the need to always use {vex}
+ ceases to exist once respective CPU features (AVX512-VNNI or AVX512VL as
+ a whole) have been disabled. This way the need for the PseudoVexPrefix
+ attribute also disappears.
+
+2022-10-20 Tom de Vries <tdevries@suse.de>
+
+ [gdb/testsuite] Fix gdb.debuginfod/fetch_src_and_symbols.exp with check-read1
+ With test-case gdb.debuginfod/fetch_src_and_symbols.exp and check-read1, I run
+ into:
+ ...
+ (gdb) FAIL: gdb.debuginfod/fetch_src_and_symbols.exp: local_url: \
+ file fetch_src_and_symbols (got interactive prompt)
+ ...
+
+ The problem is that this output:
+ ...
+ Enable debuginfod for this session? (y or [n]) y^M
+ ...
+ is matched using regexp "Enable debuginfod?.*" with matches only the first two
+ words of the output, after which an implicit clause in gdb_test_multiple triggers
+ on the second part containing the interactive prompt.
+
+ Fix this by included the interactive prompt in the regexp.
+
+ Tested on x86_64-linux.
+
+2022-10-20 Tom de Vries <tdevries@suse.de>
+
+ [gdb/testsuite] Fix gdb.mi/mi-disassemble.exp with check-read1
+ With test-case gdb.mi/mi-disassemble.exp and check-read1 I run into:
+ ...
+ FAIL: gdb.mi/mi-disassemble.exp: disassemble /b main
+ FAIL: gdb.mi/mi-disassemble.exp: get valueof "*((unsigned char *) 0x400549)"
+ ...
+
+ The problem for both FAILs is that the output is parsed using
+ gdb_test_multiple, which has implicit clauses using $gdb_prompt, which can
+ match before the explicit clauses using $mi_gdb_prompt.
+
+ Fix this by passing -prompt "$mi_gdb_prompt$" to gdb_test_multiple.
+
+ Tested on x86-64-linux.
+
+2022-10-20 Alan Modra <amodra@gmail.com>
+
+ Re: aarch64-pe support for LD, GAS and BFD
+ Fix dependencies for eaarch64pe.c. Generated files aren't handled
+ fully automatically.
+
+2022-10-20 Mark Harmstone <mark@harmstone.com>
+
+ ld: Add minimal pdb generation
+
+ ld: Add --pdb option
+ Second patch incorporates fixes for endian and UB issues in calc_hash, as per
+ https://sourceware.org/pipermail/binutils/2022-October/123514.html.
+
+2022-10-20 Kevin Buettner <kevinb@redhat.com>
+
+ Test stepping within a runtime loader / dynamic linker
+ See the remarks in rtld-step.exp for a description of what this
+ test is about.
+
+ This test case has been tested using gcc on the following x86-64 Linux
+ distributions/releases:
+
+ Fedora 28
+ Fedora 32
+ Fedora 33
+ Fedora 34
+ Fedora 35
+ Fedora 36
+ Fedora 37
+ rawhide (f38)
+ RHEL 9.1
+ Ubuntu 22.04.1 LTS
+
+ It's also been tested (and found to be working) with
+ RUNTESTFLAGS="CC_FOR_TARGET=clang" on all of the above expect for
+ Fedora 28. The (old) version of clang available on F28 did not
+ accept the -static-pie option.
+
+ I also tried to make this test work on FreeBSD 13.1. While I think I
+ made significant progress, I was ultimately stymied by this message
+ which occurs when attempting to run the main program which has been
+ set to use the fake/pretend RTLD as the ELF interpreter:
+
+ ELF interpreter /path/to/rtld-step-rtld not found, error 22
+
+ I have left one of the flags (-static) in place which I believe
+ to be needed for FreeBSD (though since I never got it to work, I
+ don't know for sure.) I've also left some declarations needed
+ for FreeBSD in rtld-step-rtld.c. They're currently disabled via
+ a #if 0; you'll need to enable them if you want to try to make
+ it work on FreeBSD.
+
+2022-10-20 Kevin Buettner <kevinb@redhat.com>
+
+ Allow debugging of runtime loader / dynamic linker
+ At present, GDB does not allow for the debugging of the runtime loader
+ and/or dynamic linker. Much of the time, this makes sense. An
+ application programmer doesn't normally want to see symbol resolution
+ code when stepping into a function that hasn't been resolved yet.
+
+ But someone who wishes to debug the runtime loader / dynamic linker
+ might place a breakpoint in that code and then wish to debug it
+ as normal. At the moment, this is not possible. Attempting to step
+ will cause GDB to internally step (and not stop) until code
+ unrelated to the dynamic linker is reached.
+
+ This commit makes a minor change to infrun.c which allows the dynamic
+ loader / linker to be debugged in the case where a step, next, etc.
+ is initiated from within that code.
+
+ While developing this fix, I tried some approaches which weren't quite
+ right. The GDB testusite definitely contains tests which FAIL when
+ it's done incorrectly. (At one point, I saw 17 regressions!) This
+ commit has been tested on x86-64 linux with no regressions.
+
+2022-10-20 Tsukasa OI <research_trasio@irq.a4lg.com>
+
+ binutils: Remove unused substitution PROGRAM
+ Unlike other substitution, this substitution of @PROGRAM@ was done in
+ binutils/Makefile and it was intended for binutils/cxxfilt.man. @PROGRAM@
+ in binutils/cxxfilt.man is removed in the commit 0285c67df190 ("Automate
+ generate on man pages") in 2001 and @PROGRAM@ is ineffective since then.
+
+ Because PROGRAM substitution does nothing, removing this manual
+ substitution should be completely safe.
+
+ binutils/ChangeLog:
+
+ * doc/local.mk: Remove unused substitution PROGRAM.
+ * Makefile.in: Regenerate.
+
+2022-10-20 GDB Administrator <gdbadmin@sourceware.org>
+
+ Automatic date update in version.in
+
+2022-10-20 Alan Modra <amodra@gmail.com>
+
+ Obsolete beos
+ * config.bfd: Obsolete *-*-beos*. Simplify x86 beos match.
+
+ Regen ld/po/BLD-POTFILES.in
+
+2022-10-19 Tom de Vries <tdevries@suse.de>
+
+ [gdb] Fix assert in handle_jit_event
+ With the cc-with-tweaks.sh patch submitted here (
+ https://sourceware.org/pipermail/gdb-patches/2022-October/192586.html ) we run
+ with:
+ ...
+ $ export STRIP_ARGS_STRIP_DEBUG=--strip-all
+ $ make check RUNTESTFLAGS="gdb.base/jit-reader.exp \
+ --target_board cc-with-gnu-debuglink"
+ ...
+ into the following assert:
+ ...
+ (gdb) run ^M
+ Starting program: jit-reader ^M
+ gdb/jit.c:1247: internal-error: jit_event_handler: \
+ Assertion `jiter->jiter_data != nullptr' failed.^M
+ ...
+
+ Fix this by handling the
+ jit_bp_sym.objfile->separate_debug_objfile_backlink != nullptr case in
+ handle_jit_event.
+
+ Tested on x86_64-linux.
+
+ Bug: https://sourceware.org/bugzilla/show_bug.cgi?id=29277
+
+2022-10-19 Pedro Alves <pedro@palves.net>
+
+ internal_error: remove need to pass __FILE__/__LINE__
+ Currently, every internal_error call must be passed __FILE__/__LINE__
+ explicitly, like:
+
+ internal_error (__FILE__, __LINE__, "foo %d", var);
+
+ The need to pass in explicit __FILE__/__LINE__ is there probably
+ because the function predates widespread and portable variadic macros
+ availability. We can use variadic macros nowadays, and in fact, we
+ already use them in several places, including the related
+ gdb_assert_not_reached.
+
+ So this patch renames the internal_error function to something else,
+ and then reimplements internal_error as a variadic macro that expands
+ __FILE__/__LINE__ itself.
+
+ The result is that we now should call internal_error like so:
+
+ internal_error ("foo %d", var);
+
+ Likewise for internal_warning.
+
+ The patch adjusts all calls sites. 99% of the adjustments were done
+ with a perl/sed script.
+
+ The non-mechanical changes are in gdbsupport/errors.h,
+ gdbsupport/gdb_assert.h, and gdb/gdbarch.py.
+
+ Approved-By: Simon Marchi <simon.marchi@efficios.com>
+ Change-Id: Ia6f372c11550ca876829e8fd85048f4502bdcf06
+
+2022-10-19 Nick Clifton <nickc@redhat.com>
+
+ Fix an illegal memory access when parsing an ELF file containing corrupt symbol version information.
+ PR 29699
+ * elf.c (_bfd_elf_slurp_version_tables): Fail if the sh_info field
+ of the section header is zero.
+
+2022-10-19 Andrew Burgess <aburgess@redhat.com>
+
+ sim/iq2000: silence pointer-sign warnings
+ When building the iq2000 simulator I see a few warnings like this:
+
+ /tmp/build/sim/../../src/sim/iq2000/iq2000.c: In function ‘fetch_str’:
+ /tmp/build/sim/../../src/sim/iq2000/iq2000.c:50:54: error: pointer targets in passing argument 3 of ‘sim_read’ differ in signedness [-Werror=pointer-sign]
+ 50 | sim_read (CPU_STATE (current_cpu), CPU2DATA(addr), buf, nr);
+ | ^~~
+ | |
+ | char *
+
+ I've silenced these warnings by casting buf to 'unsigned char *'.
+ With this change I now see no warnings when compiling iq2000.c, so
+ I've removed the line from Makefile.in that disables -Werror.
+
+ Makefile.in was also disabling -Werror when compiling mloop.c,
+ however, I'm not seeing any warnings when compiling that file, so I've
+ removed the -Werror disable in that case too.
+
+2022-10-19 Andrew Burgess <aburgess@redhat.com>
+
+ sim/erc32: avoid dereferencing type-punned pointer warnings
+ When building the erc32 simulator I get a few warnings like this:
+
+ /tmp/build/sim/../../src/sim/erc32/exec.c:1377:21: warning: dereferencing type-punned pointer will break strict-aliasing rules [-Wstrict-aliasing]
+ 1377 | sregs->fs[rd] = *((float32 *) & ddata[0]);
+ | ~^~~~~~~~~~~~~~~~~~~~~~~
+
+ The type of '& ddata[0]' will be 'uint32_t *', which is what triggers
+ the warning.
+
+ This commit makes use of memcpy when performing the type-punning,
+ which resolves the above warnings.
+
+ With this change, I now see no warnings when compiling exec.c, which
+ means that the line in Makefile.in that disables -Werror can be
+ removed.
+
+ There should be no change in behaviour after this commit.
+
+2022-10-19 Andrew Burgess <aburgess@redhat.com>
+
+ sim/ppc: mark device_error function as ATTRIBUTE_NORETURN
+ The device_error function always ends up calling the error function,
+ which is itself marked as ATTRIBUTE_NORETURN, so it makes sense that
+ device_error should also be marked ATTRIBUTE_NORETURN.
+
+ Doing this resolves a few warnings from hw_ide.c about possibly
+ uninitialized variables - the variables are only uninitialized after
+ passing through a call to device_error, which obviously means the
+ variables are never really used uninitialized, the simulation will
+ terminate with the device_error call.
+
+2022-10-19 Andrew Burgess <aburgess@redhat.com>
+
+ sim/ppc: fix warnings related to printf format strings
+ This commit is a follow on to:
+
+ commit 182421c9d2eea8c4877d983a2124e591f0aca710
+ Date: Tue Oct 11 15:02:08 2022 +0100
+
+ sim/ppc: fixes for arguments to printf style functions
+
+ where commit 182421c9d2ee addressed issues with printf format
+ arguments that were causing the compiler to give an error, this commit
+ addresses issues that caused the compiler to emit a warning.
+
+ This commit is mostly either changing the format string to match the
+ argument, or in some cases, excess, unused arguments are removed.
+
+2022-10-19 Andrew Burgess <aburgess@redhat.com>
+
+ sim/cgen: mask uninitialized variable warning in cgen-run.c
+ I see an uninitialized variable warning (with gcc 9.3.1) from
+ cgen-run.c, like this:
+
+ /tmp/build/sim/../../src/sim/cris/../common/cgen-run.c: In function ‘sim_resume’:
+ /tmp/build/sim/../../src/sim/cris/../common/cgen-run.c:259:5: warning: ‘engine_fns$’ may be used uninitialized in this function [-Wmaybe-uninitialized]
+ 259 | (* engine_fns[next_cpu_nr]) (cpu);
+ | ~^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+ /tmp/build/sim/../../src/sim/cris/../common/cgen-run.c:232:14: note: ‘engine_fns$’ was declared here
+ 232 | ENGINE_FN *engine_fns[MAX_NR_PROCESSORS];
+ | ^~~~~~~~~~
+
+ This is a false positive - we over allocate engine_fn, and then only
+ initialize the nr_cpus entries which we will later go on to use.
+
+ However, we can easily silence this warning by initializing the unused
+ entries in engine_fns to NULL, this might also help if anyone ever
+ looks at engine_fns in a debugger, it should now be obvious which
+ entries are in use, and which are not.
+
+ With this change the warning is gone.
+
+ There should be no change in behaviour with this commit.
+
+2022-10-19 Alan Modra <amodra@gmail.com>
+
+ Fix addr2line test for ppc64 elfv1 and mingw
+ * testsuite/binutils-all/addr2line.exp: Tidy. For powerpc64
+ arrange to pass --synthetic to nm, and extract .main and .fn
+ symbol address for addr2line test. Handle default executable
+ extension on cygwin/mingw compilers.
+
+2022-10-19 Nick Clifton <nickc@redhat.com>
+
+ Update MAINTAINERS file with details about accepting DCO signed contributions.
+ * MAINTAINERS: Add section on patches, copyright and DCO.
+
+2022-10-19 Andrew Burgess <aburgess@redhat.com>
+
+ gdb/testsuite: avoid temporary file in gdb/testsuite (unittest.exp)
+ I spotted that the gdb.gdb/unittest.exp script causes a temporary file
+ inserters_extractors-2.txt to be created in build/gdb/testsuite/
+ instead of in build/gdb/testsuite/output/gdb.gdb/unittest/.
+
+ This is because some of the 'maint selftest' tests create temporary
+ files in GDB's current directory, specifically, the two source files:
+
+ gdb/unittests/basic_string_view/inserters/wchar_t/2.cc
+ gdb/unittests/basic_string_view/inserters/char/2.cc
+
+ both create a temporary file called inserters_extractors-2.txt, though
+ we only run the second of these as part of GDB's selftests.
+
+ I initially proposed just using GDB's 'cd' command in unittest.exp to
+ switch to the test output directory before running the selftests,
+ however, Pedro pointed out that there was a risk here that, if GDB
+ crashed during shutdown, the generated core file would be left in the
+ test output directory rather than in the testsuite directory. As a
+ result, our clever core file spotting logic would fail to spot the
+ core file and alert the user.
+
+ Instead, I propose this slightly more involved solution. I've added a
+ new with_gdb_cwd directory proc, used like this:
+
+ with_gdb_cwd $directory {
+ # Tests here...
+ }
+
+ The new proc temporarily switches to $directory and then runs the
+ tests within the block. After running the tests the previous current
+ working directory is restored.
+
+ Additionally, after switching back to the previous cwd, we check that
+ GDB is still responsive. This means that if GDB crashed immediately
+ prior to restoring the previous directory, and left the core file in
+ the wrong place, then the responsiveness check will fail, and a FAIL
+ will be emitted, this should be enough to alert the user that
+ something has gone wrong.
+
+ With this commit in place the unittest.exp script now leaves its
+ temporary file in the test output directory.
+
+2022-10-19 Andrew Burgess <aburgess@redhat.com>
+
+ gdb/testsuite: avoid creating files in gdb/testsuite directory
+ I spotted that the test gdb.dwarf2/dw2-using-debug-str.exp was
+ creating an output file called debug_str_section in the root
+ build/gdb/testsuite directory instead of using the
+ build/gdb/testsuite/output/gdb.dwarf2/dw2-using-debug-str/ directory.
+
+ This appears to be caused by a missing '$' character. We setup a
+ variable debug_str_section which contains a path within the output
+ directory, but then when we build the objcopy command we use
+ 'debug_str_section' without a '$' prefix, as a result, we create the
+ debug_str_section file.
+
+ This commit adds the missing '$', the file is now created in the
+ output directory.
+
+2022-10-19 Andrew Burgess <aburgess@redhat.com>
+
+ bfd: fix undefined references to aarch64_pe_le_vec
+ After commit:
+
+ commit c60b3806799abf1d7f6cf5108a1b0e733a950b13
+ Date: Wed Oct 19 10:57:12 2022 +0200
+
+ aarch64-pe support for LD, GAS and BFD
+
+ It appears that bfd/Makefile.in and bfd/configure were not regenerated
+ correctly. The differences in the configure file are only whitespace,
+ but in Makefile.in a critical reference to pe-aarch64.lo was missing.
+
+2022-10-19 Jedidiah Thompson <wej22007@outlook.com>
+ Jedidiah Thompson <wej22007@outlook.com>
+ Zac Walker <zac.walker@linaro.org>
+
+ aarch64-pe support for LD, GAS and BFD
+ Allows aarch64-pe to be targeted natively, not having to use objcopy to convert it from ELF to PE.
+ Based on initial work by Jedidiah Thompson
+
+2022-10-19 rupesh potharla <rupesh.potharla@amd.com>
+
+ Binutils: Adding new testcase for addr2line.
+ * binutils/testsuite/config/default.exp: Set ADDR2LINE and ADDR2LINEFLAGS.
+ * binutils/testsuite/binutils-all/addr2line.exp: New file.
+
+2022-10-19 Tom de Vries <tdevries@suse.de>
+
+ [gdb/testsuite] Fix ERROR in gdb.python/py-breakpoint.exp
+ With test-case gdb.python/py-breakpoint.exp I run into:
+ ...
+ (gdb) ERROR: tcl error sourcing gdb.python/py-breakpoint.exp.
+ ERROR: can't read "skip_hw_watchpoint_tests_p": no such variable
+ while executing
+ "if {$skip_hw_watchpoint_tests_p} {
+ gdb_test_no_output "set can-use-hw-watchpoints 0" ""
+ }"
+ ...
+
+ Fix this by adding the missing "global skip_hw_watchpoint_tests_p" in two
+ procs.
+
+ Tested on x86_64-linux.
+
+2022-10-19 Andreas Krebbel <krebbel@linux.ibm.com>
+
+ IBM zSystems: Issue error for *DBL relocs on misaligned symbols
+ Relocs like PC32DBL require a right shift of the symbol value. There
+ is no situation where dropping symbol value bits with the right shift
+ is a good thing. Hence we now issue an error to detect such problems.
+
+2022-10-19 Simon Marchi <simon.marchi@efficios.com>
+
+ gdb: check for groups with duplicate names in reggroups:add
+ In the downstream ROCm GDB port, we would create multiple register
+ groups with duplicate names. While it did not really hurt, it certainly
+ wasn't the intent. And I don't think it ever makes sense to do so.
+
+ To catch these, change the assert in reggroups::add to check for
+ duplicate names. It's no longer necessary to check for duplicate
+ reggroup pointers, because adding the same group twice would be caught
+ by the duplicate name check.
+
+ Change-Id: Id216a58acf91f1b314d3cba2d02de73656f8851d
+ Approved-By: Tom Tromey <tom@tromey.com>
+
+2022-10-19 GDB Administrator <gdbadmin@sourceware.org>
+
+ Automatic date update in version.in
+
+2022-10-18 H.J. Lu <hjl.tools@gmail.com>
+
+ x86: Disable AVX-VNNI when disabling AVX2
+ Since AVX-VNNI requires AVX2, disable AVX-VNNI when disabling AVX2.
+
+ * i386-gen.c (cpu_flag_init): Add CpuAVX_VNNI to
+ CPU_ANY_AVX2_FLAGS.
+ * i386-init.h: Regenerate.
+
+2022-10-18 Tom Tromey <tom@tromey.com>
+
+ Remove dead code from py-finishbreakpoint.c
+ PR python/16324 points out that comparing a frame id to null_frame_id
+ can never succeed, and proposes simply removing the dead code. That
+ is what this patch does.
+
+ Bug: https://sourceware.org/bugzilla/show_bug.cgi?id=16324
+
+2022-10-18 Carl Love <cel@us.ibm.com>
+
+ Update tests to use skip_hw_watchpoint_tests to test for HW watchpoint support.
+ The hardware watchpoint check has been updated in a couple of recent
+ patches. This patch updates the hardware watchpoint test in the remaining
+ gdb tests.
+
+ The issue is the PowerPC processors support hardware watchpoints with the
+ exception of Power 9. The hardware watchpoint support is disabled on
+ Power 9. The test skip_hw_watchpoint_tests must be used to correctly
+ determine if the PowerPC processor supports hardware watchpoints.
+
+ This patch fixes 6 test failures in test gdb.threads/watchpoint-fork.exp.
+
+ Test gdb.base/watch-vfork.exp runs with can-use-hw-watchpoints set to
+ true and false. When the test is run with can-use-hw-watchpoints set to
+ true, gdb just falls back to using software watchpoints. The
+ patch reduces the number of expected passes by 2 since because it now
+ only runs once with can-use-hw-watchpoints set to false.
+
+ Test gdb.mi/mi-watch.exp runs the test with argument hw and sw. If the
+ argument is hw and hardware watchpoints are not supported the test exits.
+ The number of expected passes is cut in half with the patch as it now only
+ runs the test using software breakpoints. Previously the pass to use
+ hardware watchpoints was not skipped and the test actually ran using
+ software watchpoints.
+
+ The following tests run the same with and without the patch. The tests
+ are supposed to execute the gdb command "set can-use-hw-watchpoints 0" if
+ the processor does not support hardware bwatchpoints. However the command
+ was not being executed and gdb was falling back to using software
+ watchpoints since the Power 9 watchpoint resource check fails. With the
+ patch, the tests now execute the command and the test runs using software
+ watchpoints as it did previously. The tests are:
+
+ gdb.base/commands.exp
+ gdb.base/cond-eval-mode.exp
+ gdb.base/display.exp
+ gdb.base/gdb11531.exp
+ gdb.base/recurse.exp
+ gdb.base/value-double-free.exp
+ gdb.base/watch-bitfields.exp
+ gdb.base/watch-cond-infcall.exp
+ gdb.base/watch-cond.exp
+ gdb.base/watchpoint-solib.exp
+ gdb.base/watchpoints.exp
+
+ The following two tests are not supported on the Power 9 system used to
+ test the changes. The patch does not change the tests results for these
+ tests:
+
+ gdb.python/py-breakpoint.exp
+ gdb.mi/mi-watch-nonstop.exp
+
+2022-10-18 Tom de Vries <tdevries@suse.de>
+
+ [gdb/testsuite] Handle header files with local-remote-host.exp
+ With test-case gdb.base/included.exp and host board local-remote-host.exp with
+ tentative fix for PR29697 I run into:
+ ...
+ included.c:18:10: fatal error: included.h: No such file or directory
+ #include "included.h"
+ ^~~~~~~~~~~~
+ compilation terminated.
+ ...
+
+ Fix this by adding the missing gdb_remote_download calls.
+
+ Likewise in a few other test-cases.
+
+ Tested on x86_64-linux.
+
+2022-10-18 Tom de Vries <tdevries@suse.de>
+
+ [gdb/testsuite] Fix gdb.server/no-thread-db.exp with local-remote-host.exp
+ With test-case gdb.server/no-thread-db.exp and host board local-remote-host.exp
+ with a tentative fix for PR29697 I run into:
+ ...
+ (gdb) print foo^M
+ Cannot find thread-local storage for Thread 29613.29613, executable file \
+ $HOME/no-thread-db:^M
+ Remote target failed to process qGetTLSAddr request^M
+ (gdb) FAIL: gdb.server/no-thread-db.exp: print foo
+ ...
+
+ The regexp in the test-case expects the full $binfile pathname, but we have
+ instead $HOME/no-thread-db.
+
+ Fix this by making the regexp less strict.
+
+ Tested on x86_64-linux.
+
+2022-10-18 Tom de Vries <tdevries@suse.de>
+
+ [gdb/testsuite] Fix gdb.base/return-nodebug.exp with local-remote-host.exp
+ With host board local-remote-host.exp and test-case
+ gdb.base/return-nodebug.exp, I run into:
+ ...
+ Executing on host: gcc -fno-stack-protector -fdiagnostics-color=never \
+ -DTYPE=signed\ char -c -g -o return-nodebug-signed-char0.o \
+ /home/vries/gdb_versions/devel/src/gdb/testsuite/gdb.base/return-nodebug.c \
+ (timeout = 300)
+ builtin_spawn [open ...]^M
+ gcc: error: char: No such file or directory
+ ...
+
+ Avoid the quoting problem by not using spaces in the define.
+
+ Tested on x86_64-linux.
+
+2022-10-18 Tom de Vries <tdevries@suse.de>
+
+ [gdb/testsuite] Fix gdb.server/file-transfer.exp with local-remote-host.exp
+ When running test-case gdb.server/file-transfer.exp with host
+ board local-remote-host.exp, I get:
+ ...
+ Executing on host: cmp -s $outputs/gdb.server/file-transfer/file-transfer \
+ down-server (timeout = 300)
+ builtin_spawn [open ...]^M
+ XYZ2ZYX
+ FAIL: gdb.server/file-transfer.exp: compare intermediate binary file
+ ...
+
+ The remote host and remote target cases are handled here together here in proc
+ test_file_transfer:
+ ...
+ if {![is_remote host] && ![is_remote target]} {
+ set up_server [standard_output_file $up_server]
+ set down_server [standard_output_file $down_server]
+ }
+ ...
+
+ Fix this by handling them separately.
+
+ Tested on x86_64-linux.
+
+2022-10-18 Tom de Vries <tdevries@suse.de>
+
+ [gdb/testsuite] Update boards/README
+ Update gdb/testsuite/boards/README to reflect recent commit c4c8c27263d
+ ("[gdb/testsuite] Fix host board local-remote-host-notty.exp timeouts"), which
+ means the board now uses a pseudo-tty, but with editing disabled.
+
+2022-10-18 Markus Metzger <markus.t.metzger@intel.com>
+
+ gdb, solib-svr4: support namespaces in DSO iteration
+ When looking up names, GDB needs to stay within one linker namespace to
+ find the correct instance in case the same name is provided in more than
+ one namespace.
+
+ Modify svr4_iterate_over_objfiles_in_search_order() to stay within the
+ namespace of the current_objfile argument. If no current_objfile is
+ provided (i.e. it is nullptr), iterate over objfiles in the initial
+ namespace.
+
+ For objfiles that do not have a corresponding so_list to provide the
+ namespace, assume that the objfile was loaded into the initial namespace.
+ This would cover the main executable objfile (which is indeed loaded into
+ the initial namespace) as well as manually added symbol files.
+
+ Expected fails:
+
+ - gdb.base/non-lazy-array-index.exp: the expression parser may lookup
+ global symbols, which may result in xfers to read auxv for determining
+ the debug base as part of svr4_iterate_over_objfiles_in_search_order().
+
+ - gdb.server/non-lazy-array-index.exp: symbol lookup may access the
+ target to read AUXV in order to determine the debug base for SVR4
+ linker namespaces.
+
+ Known issues:
+
+ - get_symbol_address() and get_msymbol_address() search objfiles for a
+ 'better' match. This was introduced by
+
+ 4b610737f02 Handle copy relocations
+
+ to handle copy relocations but it now causes a wrong address to be
+ read after symbol lookup actually cound the correct symbol. This can
+ be seen, for example, with gdb.base/dlmopen.exp when compiled with
+ clang.
+
+ - gnu ifuncs are only looked up in the initial namespace.
+
+ - lookup_minimal_symbol() and lookup_minimal_symbol_text() directly
+ iterate over objfiles and are not aware of linker namespaces.
+
+2022-10-18 Markus Metzger <markus.t.metzger@intel.com>
+
+ gdb: update gnu ifunc resolve
+ Update elf_gnu_ifunc_resolve_by_cache() and elf_gnu_ifunc_resolve_by_got()
+ to use gdbarch_iterate_over_objfiles_in_search_order() in order to
+ restrict the objfile traversal to the initial namespace.
+
+ In order to extend this to other namespaces, we'd need to provide context,
+ e.g. via an objfile inside that namespace.
+
+2022-10-18 Markus Metzger <markus.t.metzger@intel.com>
+
+ gdb, symtab: inline find_quick_global_symbol_language
+ There is only one use of find_quick_global_symbol_language that calls it
+ for the special symbol "main".
+
+ Inline the function as it is probably not correct in the general case
+ where we may have multiple instances of global symbols with the same name
+ but different languages in different libraries in different linker
+ namespaces.
+
+ Further, change the objfiles iteration into a call to
+ gdbarch_iterate_over_objfiles_in_search_order, which would only search the
+ initial linker namespace, where we expect "main" to be located.
+
+2022-10-18 Markus Metzger <markus.t.metzger@intel.com>
+
+ gdb, hppa: remove unused hppa_lookup_stub_minimal_symbol
+ I stumbled over this while reviewing all objfiles traversals with regards
+ to impact of linker namespaces.
+
+ Recursive grep only finds two occurrences of hppa_lookup_stub_minimal_symbol:
+ - the declaration in hppa-tdep.h.
+ - the definition in hppa-tdep.c.
+
+ There appear to be no calls to this function. Remove it.
+
+2022-10-18 Markus Metzger <markus.t.metzger@intel.com>
+
+ gdb, cp: update add_symbol_overload_list_qualified
+ Iterate over objfiles in search order using the objfile of the selected
+ block as current_objfile so the iteration can stay inside the block's
+ linker namespace.
+
+ fixup! gdb, ada: update ada_lookup_simple_minsym
+ remove get_selected_block()
+
+ gdb, ada: update ada_lookup_simple_minsym
+ Iterate over objfile in search order using the objfile of the context
+ block as current_objfile so the iteration can stay inside the block's
+ linker namespace.
+
+ gdb, ada: collect standard exceptions in all objfiles
+ When searching for standard exceptions for Ada, we lookup the minimal
+ symbol of each exception. With linker namespaces there can be multiple
+ instances in different namespaces. Collect them all.
+
+2022-10-18 Markus Metzger <markus.t.metzger@intel.com>
+
+ gdb, python: use gdbarch_iterate_over_objfiles_in_search_order
+ The implementation of gdb.lookup_objfile() iterates over all objfiles and
+ compares their name or build id to the user-provided search string.
+
+ This will cause problems when supporting linker namespaces as the first
+ objfile in any namespace will be found. Instead, use
+ gdbarch_iterate_over_objfiles_in_search_order to only consider the
+ namespace of gdb.current_objfile() for the search, which defaults to the
+ initial namespace when gdb.current_objfile() is None.
+
+2022-10-18 Markus Metzger <markus.t.metzger@intel.com>
+
+ gdb, compile: unlink objfile stored in module
+ When cleaning up after a compile command, we iterate over all objfiles and
+ unlink the first objfile with the same name as the one we compiled.
+
+ Since we already store a pointer to that objfile in the module and use it
+ to get the name we're comparing against, there's no reason to iterate, at
+ all. We can simply use that objfile.
+
+ This further avoids potential issues when an objfile with the same name is
+ loaded into a different linker namespace.
+
+2022-10-18 Markus Metzger <markus.t.metzger@intel.com>
+
+ gdb, gdbserver: extend RSP to support namespaces
+ Introduce a new qXfer:libraries-svr4:read annex key/value pair
+
+ lmid=<namespace identifier>
+
+ to be used together with start and prev to provide the namespace of start
+ and prev to gdbserver.
+
+ Unknown key/value pairs are ignored by gdbserver so no new supports check
+ is needed.
+
+ Introduce a new library-list-svr4 library attribute
+
+ lmid
+
+ to provide the namespace of a library entry to GDB.
+
+ This implementation uses the address of a namespace's r_debug object as
+ namespace identifier.
+
+ This should have incremented the minor version but since unknown XML
+ attributes are ignored, anyway, and since changing the version results in
+ a warning from GDB, the version is left at 1.0.
+
+2022-10-18 Markus Metzger <markus.t.metzger@intel.com>
+
+ gdbserver: move main_lm handling into caller
+ When listing SVR4 shared libraries, special care has to be taken about the
+ first library in the default namespace as that refers to the main
+ executable. The load map address of this main executable is provided in
+ an attribute of the library-list-svr4 element.
+
+ Move that code from where we enumerate libraries inside a single namespace
+ to where we generate the rest of the library-list-svr4 element. This
+ allows us to complete the library-list-svr4 element inside one function.
+
+ There should be no functional change.
+
+2022-10-18 Markus Metzger <markus.t.metzger@intel.com>
+ Lu, Hongjiu <hongjiu.lu@intel.com>
+
+ gdb, gdbserver: support dlmopen()
+ In glibc, the r_debug structure contains (amongst others) the following
+ fields:
+
+ int r_version:
+ Version number for this protocol. It should be greater than 0.
+
+ If r_version is 2, struct r_debug is extended to struct r_debug_extended
+ with one additional field:
+
+ struct r_debug_extended *r_next;
+ Link to the next r_debug_extended structure. Each r_debug_extended
+ structure represents a different namespace. The first r_debug_extended
+ structure is for the default namespace.
+
+ 1. Change solib_svr4_r_map argument to take the debug base.
+ 2. Add solib_svr4_r_next to find the link map in the next namespace from
+ the r_next field.
+ 3. Update svr4_current_sos_direct to get the link map in the next namespace
+ from the r_next field.
+ 4. Don't check shared libraries in other namespaces when updating shared
+ libraries in a new namespace.
+ 5. Update svr4_same to check the load offset in addition to the name
+ 6. Update svr4_default_sos to also set l_addr_inferior
+ 7. Change the flat solib_list into a per-namespace list using the
+ namespace's r_debug address to identify the namespace.
+
+ Add gdb.base/dlmopen.exp to test this.
+
+ To remain backwards compatible with older gdbserver, we reserve the
+ namespace zero for a flat list of solibs from all namespaces. Subsequent
+ patches will extend RSP to allow listing libraries grouped by namespace.
+
+ This fixes PR 11839.
+
+2022-10-18 Markus Metzger <markus.t.metzger@intel.com>
+
+ gdb, solib-svr4: remove locate_base()
+ Whenever we call locate_base(), we clear info->debug_base directly before
+ the call. Thus, we never cache the base location as locate_base() had
+ intended.
+
+ Move the svr4_have_link_map_offsets() check into elf_locate_base(), inline
+ locate_base() at all call sites, and remove it.
+
+2022-10-18 Markus Metzger <markus.t.metzger@intel.com>
+
+ gdb, testsuite: extend gdb_test_multiple checks
+ Check for
+
+ warning: Corrupted shared library list
+
+ and for
+
+ Invalid cast.
+ warning: Probes-based dynamic linker interface failed.
+ Reverting to original interface.
+
+ in gdb_test_multiple.
+
+2022-10-18 Jan Beulich <jbeulich@suse.com>
+
+ x86: generalize gas documentation for disabling of ISA extensions
+ As of commit ae89daecb132 ("x86: generalize disabling of sub-
+ architectures") there's no arbitrary subset of ISAs which can also be
+ disabled. This should have been reflected in documentation right away.
+ Since I failed to do so, correct this now.
+
+ x86: correct CPU_AMX_{BF16,INT8}_FLAGS
+ AMX-TILE is a prereq to these, as already correctly expressed by
+ CPU_ANY_AMX_TILE_FLAGS. Express the dependency also in the reverse
+ ("positive") direction.
+
+2022-10-18 GDB Administrator <gdbadmin@sourceware.org>
+
+ Automatic date update in version.in
+
+2022-10-17 Tom Tromey <tromey@adacore.com>
+
+ kfail an Ada test for GCC < 12
+ I noticed one particular Ada test was failing on Fedora 34, but works
+ when I switch to GCC 12. This patch arranges to kfail the test when
+ an older compiler is used.
+
+ I tested this with GCC 11, 12, and 13. I'm going to check it in.
+
+2022-10-17 Tom Tromey <tromey@adacore.com>
+
+ Remove a nullptr check in DWARF scanner
+ In scan_attributes, The DWARF scanner checks whether maybe_defer is
+ nullptr, but this can never happen. This patch removes the check.
+
+2022-10-17 Pedro Alves <pedro@palves.net>
+
+ gdbarch-components.py: Remove spurious space from "frame_info_ptr " params
+ If you run gdbarch.py today, you'll get local modifications compared
+ to what's in the tree, like:
+
+ --- c/gdb/gdbarch-gen.h
+ +++ w/gdb/gdbarch-gen.h
+ @@ -315,8 +315,8 @@ extern void set_gdbarch_register_type (struct gdbarch *gdbarch, gdbarch_register
+ should match the address at which the breakpoint was set in the dummy
+ frame. */
+
+ -typedef struct frame_id (gdbarch_dummy_id_ftype) (struct gdbarch *gdbarch, frame_info_ptr this_frame);
+ -extern struct frame_id gdbarch_dummy_id (struct gdbarch *gdbarch, frame_info_ptr this_frame);
+ +typedef struct frame_id (gdbarch_dummy_id_ftype) (struct gdbarch *gdbarch, frame_info_ptr this_frame);
+ +extern struct frame_id gdbarch_dummy_id (struct gdbarch *gdbarch, frame_info_ptr this_frame);
+ extern void set_gdbarch_dummy_id (struct gdbarch *gdbarch, gdbarch_dummy_id_ftype *dummy_id);
+
+ etc.
+
+ The extra space comes from the "frame_info_ptr " param that appears in
+ a number of gdbarch methods in gdbarch-components.py. With the extra
+ space removed, running ./gdbarch.py generates the exact code that's in
+ the tree already.
+
+ Change-Id: If7d20b8c6b2fd9ff466142a01bd2611c9ef9f53e
+
+2022-10-17 Tom Tromey <tromey@adacore.com>
+
+ Change .gdb_index de-duplication implementation
+ While investigating PR symtab/29179, I found that one Ada test failed
+ because, although a certain symbol was present in the index, with the
+ new DWARF reader it pointed to a different CU than was chosen by
+ earlier versions of gdb.
+
+ This patch changes how symbol de-duplication is done, deferring the
+ process until the entire symbol table has been constructed. This way,
+ it's possible to always choose the lower-numbered CU among duplicates,
+ which is how gdb (implicitly) previously worked.
+
+ Bug: https://sourceware.org/bugzilla/show_bug.cgi?id=29179
+
+2022-10-17 Tom Tromey <tromey@adacore.com>
+
+ Improve Ada support in .gdb_index
+ The cooked index work changed how .gdb_index is constructed, and in
+ the process broke .gdb_index support. This is PR symtab/29179.
+
+ This patch partially fixes the problem. It arranges for Ada names to
+ be encoded in the form expected by the index code. In particular,
+ linkage names for Ada are emitted, including the "main" name; names
+ are Ada-encoded; and names are no longer case-folded, something that
+ prevented operator names from round-tripping correctly.
+
+ Bug: https://sourceware.org/bugzilla/show_bug.cgi?id=29179
+
+2022-10-17 Tom Tromey <tromey@adacore.com>
+
+ Don't add type linkage names to cooked index
+ The compiler will sometimes emit a linkage name for a type, like:
+
+ <1d3> DW_AT_linkage_name: (indirect string, offset: 0x106f): 11__mbstate_t
+
+ These names aren't very useful, and this patch changes the DWARF
+ reader so that they are ignored by the cooked index.
+
+2022-10-17 Tom Tromey <tromey@adacore.com>
+
+ Fix regression in c-linkage-name.exp with gdb index
+ c-linkage-name.exp started failing with the gdb-index target board due
+ to an earlier patch. The problem here is that some linkage names must
+ be in the index -- but, based on inspection, not C++ linkage names.
+ This patch updates the code to exclude only these.
+
+2022-10-17 TaiseiIto <taisei1212@outlook.jp>
+
+ Fix null pointer representations
+ Since "NULL" and "0" are used to represent invalid address in function
+ "gdbarch_find_by_info" in "binutils-gdb/gdb/arch-utils.c", I modified
+ them to "nullptr".
+
+2022-10-17 Simon Marchi <simon.marchi@efficios.com>
+
+ gdb: silence unused-but-set-variable warning about yynerrs in cp-name-parser.y
+ When building with clang 15 on Ubuntu 20.04, I get:
+
+ CXX cp-name-parser.o
+ cp-name-parser.c.tmp:1777:9: error: variable 'cpnameyynerrs' set but not used [-Werror,-Wunused-but-set-variable]
+ int yynerrs;
+ ^
+ /home/smarchi/src/binutils-gdb/gdb/yy-remap.h:58:18: note: expanded from macro 'yynerrs'
+ #define yynerrs GDB_YY_REMAP (yynerrs)
+ ^
+ /home/smarchi/src/binutils-gdb/gdb/yy-remap.h:40:29: note: expanded from macro 'GDB_YY_REMAP'
+ #define GDB_YY_REMAP(YYSYM) GDB_YY_REMAP_1 (GDB_YY_REMAP_PREFIX, YYSYM)
+ ^
+ /home/smarchi/src/binutils-gdb/gdb/yy-remap.h:39:39: note: expanded from macro 'GDB_YY_REMAP_1'
+ #define GDB_YY_REMAP_1(PREFIX, YYSYM) GDB_YY_REMAP_2 (PREFIX, YYSYM)
+ ^
+ /home/smarchi/src/binutils-gdb/gdb/yy-remap.h:38:39: note: expanded from macro 'GDB_YY_REMAP_2'
+ #define GDB_YY_REMAP_2(PREFIX, YYSYM) PREFIX ## YYSYM
+ ^
+ <scratch space>:45:1: note: expanded from here
+ cpnameyynerrs
+ ^
+
+ This is because clang 15 warns for something like this:
+
+ int n;
+ n = 0;
+ ++n;
+
+ whereas previous versions do not.
+
+ yynerrs is defined in yyparse and is there for actions to use. Since
+ the actions in cp-name-parser.y don't use it, we get a warning. We see
+ this problem on this particular .y file because it uses `%pure-parser`
+ [1], which makes yynerrs a local rather than a global.
+
+ I initially fixed this by using
+ DIAGNOSTIC_IGNORE_UNUSED_BUT_SET_VARIABLE (like in commit f7aa1a5acc5
+ ("gold: Suppress "unused" variable warning on Clang")), but then I
+ realized we could suppress the warning in a more fine-grained way using
+ this in a rule:
+
+ (void) yynerrs;
+
+ [1] https://www.gnu.org/software/bison/manual/html_node/Error-Reporting-Function.html
+
+ Change-Id: I6cae7a4207c19fe1b719e2ac19be69122ebe3af1
+
+2022-10-17 Clément Chigot <chigot@adacore.com>
+
+ ld/testsuite: consistently add board_ldflags when linking with GCC
+ Currently, the functions checking if the compiler is available or if a
+ feature is available add both board_cflags and board_ldflags.
+ However, functions running the tests only retrieve board_cflags. This
+ can lead to unexpected errors when mandaratory flags are defined in
+ board_ldflags and not board_cflags.
+
+ ld/ChangeLog:
+
+ * testsuite/ld-unique/unique.exp: Add board_ldflags when
+ linking with GCC.
+ * testsuite/lib/ld-lib.exp: Likewise.
+
+2022-10-17 CaiJingtao <caijingtao@huawei.com>
+
+ Allow explicit size specifier for predicate operand of {sq, uq, }{incp, decp}
+ Omitting predicate size specifier in vector form of {sq, uq, }{decp, incp} is deprecated and will be prohibited in a future release of the aarch64,
+ see https://developer.arm.com/documentation/ddi0602/2021-09/SVE-Instructions/DECP--vector---Decrement-vector-by-count-of-true-predicate-elements-.
+
+ This allows explicit size specifier, e.g. `decp z0.h, p0.h`, for predicate operand of these SVE instructions.
+ The existing behaviour of not requiring the specifier is preserved.
+ And the disasembly is with the specifier with this patch.
+
+ The GAS tests passed under our local tests.
+
+ opcodes/
+ * aarch64-asm.c: Modify `sve_size_hsd` encoding.
+ * aarch64-tbl.h (aarch64_opcode_table): Add QUALS's type OP_SVE_Vv_HSD
+ for decp, incp, sqdecp, sqincp, uqdecp and uqincp.
+
+ gas/
+ * testsuite/gas/aarch64/sve-movprfx_23.s: Update movprfx_23 testcase's
+ test_sametwo macro, where take the predicate size specifier.
+ * testsuite/gas/aarch64/sve-movprfx_23.d: Update movprfx_23 testcase's
+ expected disassembly.
+ * testsuite/gas/aarch64/sve-movprfx_23.l: Update movprfx_23 testcase's
+ expected assembler messages.
+ * testsuite/gas/aarch64/sve.s: Add sve testcase's instructions for
+ decp, incp, sqdecp, sqincp, uqdecp and uqincp, which take the
+ predicate size specifier.
+ * testsuite/gas/aarch64/sve.d: Update sve testcase's expected
+ disassembly.
+
+2022-10-17 Richard Sandiford <richard.sandiford@arm.com>
+
+ aarch64: Tweak handling of F_STRICT
+ Current F_STRICT qualifier checking is enforced after the fact
+ rather than as part of the match. This makes it impossible to
+ have, e.g.:
+
+ QLF2(S_D, S_D)
+ QLF2(S_D, NIL)
+
+ in the same list.
+
+ opcodes/
+ * aarch64-opc.c (aarch64_find_best_match): Handle F_STRICT here
+ rather than...
+ (match_operands_qualifier): ...here.
+
+2022-10-17 Jan Beulich <jbeulich@suse.com>
+
+ x86: properly decode EVEX.W for AVX512_4{FMAPS,VNNIW} insns
+ These require EVEX.W=0. Use %XS to facilitate the checking, even if for
+ the AVX512_4VNNIW ones this is kind of an abuse (as 's' there stands for
+ "signed", not "single").
+
+ While there also correct the 3rd operand for the AVX512_4VNNIW entries:
+ Only the memory form is allowed (just like for AVX512_4FMAPS, where the
+ correct type is already in use).
+
+2022-10-17 Jan Beulich <jbeulich@suse.com>
+
+ x86: fold AVX512-VNNI disassembler entries with AVX-VNNI ones
+ Make %XV also print the separating blank in the VEX case, while making
+ it do nothing for EVEX-encoded insns. This way the AVX-VNNI entries
+ can be re-used for AVX512-VNNI, at the same time fixing the lack of
+ EVEX.W decoding.
+
+ For the AVX-VNNI ones further make sure only VEX.66 forms are actually
+ decoded.
+
+2022-10-17 GDB Administrator <gdbadmin@sourceware.org>
+
+ Automatic date update in version.in
+
+2022-10-16 Tom Tromey <tom@tromey.com>
+
+ More uses of checked_static_cast
+ This patch changes a few more uses of static_cast to use
+ checked_static_cast. In this patch, cast-to-references are converted
+ by moving the dereference outside of the cast, as checked_static_cast
+ only handles pointers.
+
+2022-10-16 Tom Tromey <tom@tromey.com>
+
+ Use checked_static_cast in more places
+ I looked through all the uses of static_cast<... *> in gdb and
+ converted many of them to checked_static_cast.
+
+ I couldn't test a few of these changes.
+
+2022-10-16 Alan Modra <amodra@gmail.com>
+
+ PowerPC se_rfmci and VLE, SPE2 and LSP insns with -many
+ I noticed recently that se_rfmci, a VLE mode instruction, was being
+ accepted by non-VLE cpus, and also that se_rfmci by itself in a
+ section did not cause SHF_PPC_VLE to be set. ie. both testcases added
+ by this patch fail without the changes to tc-ppc.c here.
+
+ Also, VLE, SPE2 and LSP insns were not accepted by the assembler with
+ -many nor were SPE2 and LSP being disassembled with -Many.
+
+ gas/
+ * config/tc-ppc.c (ppc_setup_opcodes): Wrap long lines. Add
+ vle_opcodes when PPC_OPCODE_VLE or PPC_OPCODE_ANY. Simplify
+ disassembler index segment checks. Add LSP and SPE2 opcodes
+ when PPC_OPCODE_ANY too.
+ (md_assemble): Correct logic adding PPC_APUINFO_VLE and
+ SHF_PPC_VLE.
+ * testsuite/gas/ppc/se_rfmci.s
+ * testsuite/gas/ppc/se_rfmci.d,
+ * testsuite/gas/ppc/se_rfmci_bad.d: New tests.
+ * testsuite/gas/ppc/ppc.exp: Run them.
+ opcodes/
+ * ppc-dis.c (print_insn_powerpc): Disassemble SPE2 and LSP insn
+ when -Many.
+ * ppc-opc.c (vle_opcodes <se_rfmci>): Comment.
+
+2022-10-16 Alan Modra <amodra@gmail.com>
+
+ zlib-gabi to zstd woes
+ So we had a zlib-gabi .debug_info section that increased in size with
+ zstd, so much so that it was better to leave the section
+ uncompressed. Things went horribly wrong when the section was read
+ again later. The section was read again off disk using the
+ uncompressed size. So you get the zlib section again with some
+ garbage at the end. Fix that particular problem by setting the
+ section flag SEC_IN_MEMORY. Any future read will get sec->contents.
+
+ Also, if the section is to be left uncompressed, the input
+ SHF_COMPRESSED flag needs to be reset otherwise objcopy will copy it
+ to output.
+
+ Finally, bfd_convert_section_contents needed a small update to handle
+ zstd compressed sections, and I've deleted bfd_cache_section_contents.
+
+ * bfd.c (bfd_convert_section_contents): Handle zstd.
+ * compress.c (bfd_compress_section_contents): When section
+ contents are uncompressed set SEC_IN_MEMORY flag,
+ compress_status to COMRESS_SECTION_NONE, and clear
+ SHF_COMPRESSED. Set SEC_IN_MEMORY for compressed contents.
+ (bfd_get_full_section_contents): Don't check section size
+ against file size when SEC_IN_MEMORY.
+ (bfd_cache_section_contents): Delete function.
+ * elf32-arm.c (elf32_arm_get_synthetic_symtab): Expand
+ bfd_cache_section_contents here.
+ * bfd-in2.h: Regenerate.
+
+2022-10-16 GDB Administrator <gdbadmin@sourceware.org>
+
+ Automatic date update in version.in
+
+2022-10-15 Torbjörn SVENSSON <torbjorn.svensson@foss.st.com>
+
+ gdb/arm: Don't rely on loop detection to stop unwinding
+ Setting SP of the next frame to the same address as the current frame
+ is an ugly way to stop the unwinding. A cleaner way is to rely on
+ the frame_unwind_stop_reason function to return UNWIND_OUTERMOST.
+
+2022-10-15 GDB Administrator <gdbadmin@sourceware.org>
+
+ Automatic date update in version.in
+
+2022-10-14 Tom de Vries <tdevries@suse.de>
+
+ [gdb/testsuite] Add boards/README
+ Add a file gdb/testsuite/boards/README, to make it easier to get a high-level
+ overview of the various boards.
+
+2022-10-14 Tom de Vries <tdevries@suse.de>
+
+ [gdb/contrib] Handle STRIP_ARGS_{STRIP,KEEP}_DEBUG in cc-with-tweaks.sh
+ Handle new environment variable STRIP_ARGS_STRIP_DEBUG, defaulting to
+ --strip-debug in gdb/contrib/cc-with-tweaks.sh, such that we can easily
+ reproduce the PR29277 assert using:
+ ...
+ $ export STRIP_ARGS_STRIP_DEBUG=--strip-all
+ $ make check RUNTESTFLAGS="gdb.base/jit-reader.exp \
+ --target_board cc-with-gnu-debuglink"
+ ...
+
+ For completeness sake and to avoid confusion about which of the two used strip
+ invocations the passed args apply to, likewise add STRIP_ARGS_KEEP_DEBUG,
+ defaulting to --only-keep-debug.
+
+ Script checked with shellcheck, no new warnings added.
+
+ Tested on x86_64-linux.
+
+2022-10-14 Tom de Vries <tdevries@suse.de>
+
+ [gdb] Fix heap-buffer-overflow in find_program_interpreter
+ With the test-case included in this patch, we run into:
+ ...
+ (gdb) target remote localhost:2347^M
+ `target:twice-connect' has disappeared; keeping its symbols.^M
+ Remote debugging using localhost:2347^M
+ warning: Unable to find dynamic linker breakpoint function.^M
+ GDB will be unable to debug shared library initializers^M
+ and track explicitly loaded dynamic code.^M
+ Reading /usr/lib/debug/.build-id/$hex/$hex.debug from remote target...^M
+ 0x00007ffff7dd4550 in ?? ()^M
+ (gdb) PASS: gdb.server/twice-connect.exp: session=second: gdbserver started
+ FAIL: gdb.server/twice-connect.exp: found interpreter
+ ...
+
+ The problem originates in find_program_interpreter, where
+ bfd_get_section_contents is called to read .interp, but fails. The function
+ returns false but the result is ignored, so find_program_interpreter returns
+ some random string.
+
+ Fix this by checking the result of the call to bfd_get_section_contents.
+
+ Tested on x86_64-linux.
+
+ Bug: https://sourceware.org/bugzilla/show_bug.cgi?id=29652
+
+2022-10-14 Tom de Vries <tdevries@suse.de>
+
+ [gdb/testsuite] Fix gdb.server/unittest.exp with host board local-remote-host.exp
+ With test-case gdb.server/unittest.exp and host board local-remote-host.exp I
+ run into:
+ ...
+ builtin_spawn build/gdbserver/gdbserver --selftest^M
+ ERROR: : spawn id exp7 not open
+ while executing
+ "expect {
+ -i exp7 -timeout 10
+ -i $server_spawn_id
+ -re "Ran ($decimal) unit tests, 0 failed" {
+ set num_ran $expect_out(1,string)
+ gdb_assert "..."
+ ("uplevel" body line 1)
+ invoked from within
+ "uplevel $body" NONE : spawn id exp7 not open
+ UNRESOLVED: gdb.server/unittest.exp: unit tests
+ ...
+
+ The problem is (as fixed for avr in commit df5b8876083 ("gdb/testsuite: better
+ handle failures in simavr board, reap simavr process")), that gdb_expect through
+ remote_expect adds a "-i <gdb spawn id> -timeout 10", which is the one causing
+ the error.
+
+ As in aforementioned commit, fix this by using expect instead.
+
+ Tested on x86_64-linux.
+
+2022-10-14 Tom de Vries <tdevries@suse.de>
+
+ [gdb/testsuite] Fix host board local-remote-host-notty.exp timeouts
+ With test-case gdb.server/stop-reply-no-thread-multi.exp and host board
+ local-remote-host-notty.exp we occasionally run into a silent out, due to
+ getting:
+ ...
+ (gdb) kill^M
+ (gdb) The program is not being run.^M
+ ...
+ instead of the expected:
+ ...
+ (gdb) kill^M
+ The program is not being run.^M
+ (gdb)
+ ...
+
+ Likewise, we occasionally run into a nonsilent timeout:
+ ...
+ (gdb) disconnect^M
+ (gdb) You can't do that when your target is `exec'^M
+ FAIL: gdb.server/stop-reply-no-thread.exp: to_disable=Tthread: t_nonstop=on: \
+ disconnect (timeout)
+ ...
+
+ Typically, this results in the test-case taking more than two minutes to run.
+
+ The problem can be reproduced using just:
+ ...
+ $ ssh -l $USER 127.0.0.1 gdb -q -ex kill
+ ...
+
+ Note that ssh by default uses -T which disables pseudo-tty allocation (as
+ opposed to -t which forces pseudo-tty allocation):
+ ...
+ $ ssh -l $USER 127.0.0.1 -T tty
+ not a tty
+ $ ssh -l $USER 127.0.0.1 -t tty
+ /dev/pts/5
+ Connection to 127.0.0.1 closed.
+ ...
+ and according to https://stackoverflow.com/a/63241102 the behaviour we're
+ seeing is specific to using '-T'.
+
+ The related host board local-remote-host.exp does use '-t', and the only
+ difference between the two boards mentioned is whether editing is on or off.
+
+ Fix this by:
+ - moving the content of local-remote-host-notty.exp into
+ local-remote-host.exp
+ - consequently, extending the copyright years in local-remote-host.exp
+ - including local-remote-host.exp in local-remote-host-notty.exp
+ (making local-remote-host-notty.exp use '-t')
+ - adding -iex "set editing off" to GDBFLAGS in local-remote-host-notty.exp
+
+ This results in the test-case taking just 6 seconds to run.
+
+ Tested on x86_64-linux.
+
+ Bug: https://sourceware.org/bugzilla/show_bug.cgi?id=29669
+
+2022-10-14 Tom de Vries <tdevries@suse.de>
+
+ [gdb/testsuite] Disable styling in host board local-remote-host.exp
+ With test-case gdb.server/stop-reply-no-thread.exp and host board
+ local-remote-host.exp, I run into:
+ ...
+ Breakpoint 1, ^[[33mmain^[[m () at ^[[32mstop-reply-no-thread.c^[[m:21^M
+ 21 ^[[01;34mreturn^[[m ^[[35m0^[[m^[[31m;^[[m^M
+ (gdb) FAIL: gdb.server/stop-reply-no-thread.exp: to_disable=: t_nonstop=off: \
+ continue to main
+ ...
+
+ The problem is that styling is enabled, and that is causing a regexp mismatch.
+
+ With native, styling is disabled in default_gdb_init by doing
+ 'setenv TERM "dumb"', but that only has effect because the build (where we
+ execute runtest, and consequently the setenv) and the host (where we execute
+ gdb) are the same. For this host board however, gdb executes on a remote
+ host, and the setenv has no effect.
+
+ We could try to make some generic way to set TERM on the host, but for the
+ purposes of this test-case it seems sufficient to just add:
+ ...
+ set GDBFLAGS "${GDBFLAGS} -iex \"set style enabled off\""
+ ...
+ so let's go with that for now.
+
+ Tested on x86_64-linux.
+
+2022-10-14 Tom Tromey <tromey@adacore.com>
+
+ Use scoped_value_mark in more places
+ I looked at all the spots using value_mark, and converted all the
+ straightforward ones to use scoped_value_mark instead.
+
+ Regression tested on x86-64 Fedora 34.
+
+2022-10-14 Torbjörn SVENSSON <torbjorn.svensson@foss.st.com>
+
+ gdb/arm: Stop unwinding on error, but do not assert
+ When it's impossible to read the FPCCR and XPSR, the unwinding is
+ unpredictable as the it's not possible to determine the correct
+ frame size or padding.
+ The only sane thing to do in this condition is to stop the unwinding.
+
+ Example session without this patch:
+
+ (gdb) bt
+ #0 SVC_Handler () at .../GPIO/GPIO_EXTI/Src/stm32f4xx_it.c:112
+ .../gdb/arm-tdep.c:3594: internal-error: arm_m_exception_cache: Assertion `safe_read_memory_unsigned_integer (FPCCR, ARM_INT_REGISTER_SIZE, byte_order, &fpccr)' failed.
+ A problem internal to GDB has been detected,
+ further debugging may prove unreliable.
+ ----- Backtrace -----
+ 0x5583bfb2a157 gdb_internal_backtrace_1
+ ...
+ ---------------------
+
+ This is a bug, please report it. For instructions, see:
+ <https://www.gnu.org/software/gdb/bugs/>.
+
+ Aborted (core dumped)
+
+ Example session with this patch:
+
+ (gdb) bt
+ #0 SVC_Handler () at .../GPIO/GPIO_EXTI/Src/stm32f4xx_it.c:112
+ warning: Could not fetch required FPCCR content. Further unwind is impossible.
+ #1 <signal handler called>
+ (gdb)
+
+ Reviewed-by: Pedro Alves <pedro@palves.net>
+
+2022-10-14 Alan Modra <amodra@gmail.com>
+
+ PowerPC SPE disassembly and tests
+ Where sub and subf forms of an instruction exist we generally
+ disassemble to the extended insn sub form rather than the underlying
+ machine subf instruction. Do so for SPE evsubw and evsubiw too.
+
+ spe_ambiguous.d always was a bit too optimistic. There is no sensible
+ way to disassemble identical bytes back to different and original
+ source. Instead change the test to check -Mraw results.
+
+ gas/
+ * testsuite/gas/ppc/ppc.exp: Run spe_ambiguous test.
+ * testsuite/gas/ppc/spe.d: Expect evsubw and evsubiw rather than
+ evsubfw and evsubifw.
+ * testsuite/gas/ppc/spe_ambiguous.s: Test evnor form equivalent
+ to evnot.
+ * testsuite/gas/ppc/spe_ambiguous.d: Test Mraw.
+ opcodes/
+ * ppc-opc.c (powerpc_opcodes): Move evsubw before evsubfw and
+ evsubiw before evsubifw and mark EXT.
+
+2022-10-14 Alan Modra <amodra@gmail.com>
+
+ e200 LSP support
+ It has bothered me for a long time that we have disabled LSP (and SPE)
+ tests. Also the LSP test comment indicating there is something wrong
+ with get_powerpc_dialect. I don't think there is. Decoding of a VLE
+ instruction depends on whether the processor is in VLE mode (some
+ processors support both VLE and standard PPC) which we flag per
+ section with SHF_PPC_VLE for decoding when disassembling.
+
+ Background: Some versions of powerpc e200 have "Lightweight Signal
+ Processing" support, examples being e200z215 and e200z425. As far as
+ I can tell, LSP and SPE are mutually exclusive. This seems to be
+ borne out by insn encoding, for example LSP "zvaddih" and SPE "evaddw"
+ have the same encoding. So none of the processor descriptions in
+ ppc_opts ought to have both PPC_OPCODE_LSP and PPC_OPCODE_SPE/2, if we
+ want disassembly to work. I also could not find anything to suggest
+ that the LSP insns are enabled only in VLE mode, which means the LSP
+ insns should not be in vle_opcodes.
+
+ Fix all this by moving the LSP insns to their own table, and add a new
+ e200z2 cpu entry with LSP support, removing LSP from -me200z4 and from
+ -mvle. (Yes, I know, as I said above some of the e200z4 processors
+ have LSP. Others have SPE. It's hard to choose good options. Think
+ of z2 as meaning earlier, z4 as later.) Also add -mlsp to allow
+ adding the LSP insn set.
+
+ include/
+ * opcode/ppc.h (lsp_opcodes, lsp_num_opcodes): Declare.
+ (LSP_OP_TO_SEG): Define.
+ binutils/
+ * doc/binutils.texi: Update ppc docs.
+ gas/
+ * config/tc-ppc.c (ppc_setup_opcodes): Add lsp opcodes to ppc_hash.
+ * doc/c-ppc.texi: Document e200 and lsp.
+ * testsuite/gas/ppc/lsp-checks.d: Assemble with -me200z2.
+ * testsuite/gas/ppc/lsp.d: Likewise, disassembly too.
+ * testsuite/gas/ppc/ppc.exp: Don't xfail lsp test.
+ opcodes/
+ * ppc-dis.c (ppc_opts): Add e200z2 and lsp. Don't set
+ PPC_OPCODE_LSP for e200z4 or vle.
+ (ppc_parse_cpu): Mutually exclude LSP and SPE.
+ (LSP_OPCD_SEGS): Define.
+ (lsp_opcd_indices): New array.
+ (disassemble_init_powerpc): Init lsp_opcd_indices.
+ (lookup_lsp): New function.
+ (print_insn_powerpc): Call it.
+ * ppc-opc.c: Include libiberty.h for ARRAY_SIZE and use throughout.
+ (vle_opcodes): Move LSP opcodes to..
+ (lsp_opcodes): ..here, and sort.
+ (lsp_num_opcodes): New.
+
+2022-10-14 Alan Modra <amodra@gmail.com>
+
+ PR29677, Field `the_bfd` of `asymbol` is uninitialised
+ Besides not initialising the_bfd of synthetic symbols, counting
+ symbols when sizing didn't match symbols created if there were any
+ dynsyms named "". We don't want synthetic symbols without names
+ anyway, so get rid of them. Also, simplify and correct sanity checks.
+
+ PR 29677
+ * mach-o.c (bfd_mach_o_get_synthetic_symtab): Rewrite.
+
+2022-10-14 Tom de Vries <tdevries@suse.de>
+
+ [gdb/testsuite] Drop unnecessary -Wl,-soname in gdb.base/skip-solib.exp
+ I noticed in gdb.base/skip-solib.exp:
+ ...
+ if {[gdb_compile_shlib ${srcdir}/${subdir}/${srcfile_lib} ${binfile_lib} \
+ [list debug -Wl,-soname,${libname}.so]] != ""} {
+ return -1
+ }
+ ...
+ that the -Wl,-soname argument is missing an ldflags= prefix, but adding it
+ gives us a duplicate:
+ ...
+ Executing on host: gcc -fno-stack-protector \
+ outputs/gdb.base/skip-solib/skip-solib-lib.c.o -fdiagnostics-color=never \
+ -shared -g -Wl,-soname,libskip-solib.so -Wl,-soname,libskip-solib.so -lm \
+ -o outputs/gdb.base/skip-solib/libskip-solib.so (timeout = 300)
+ ...
+ so apparently it's taken care of by gdb_compile_shlib.
+
+ Drop the inactive and also unnecessary -Wl,-soname,${libname}.so from the
+ flags list for the gdb_compile_shlib call.
+
+ Tested on x86_64-linux.
+
+2022-10-14 Tom de Vries <tdevries@suse.de>
+
+ [gdb/testsuite] Fix gdb.base/infoline-reloc-main-from-zero.exp with PIE
+ With test-case gdb.base/infoline-reloc-main-from-zero.exp and target board
+ unix/-fPIE/-pie I run into:
+ ...
+ gdb compile failed, ld: infoline-reloc-main-from-zero: error: \
+ PHDR segment not covered by LOAD segment
+ collect2: error: ld returned 1 exit status
+ ...
+
+ When running with native, I find that the executable is static:
+ ...
+ $ file infoline-reloc-main-from-zero
+ infoline-reloc-main-from-zero: ELF 64-bit LSB executable, x86-64, \
+ version 1 (SYSV), statically linked, BuildID[sha1]=$hex, with debug_info, \
+ not stripped
+ ...
+ despite not having been compiled with -static.
+
+ Fix the compilation by adding -static to the compilation flags.
+
+ Tested on x86_64-linux.
+
+2022-10-14 Tom de Vries <tdevries@suse.de>
+
+ [gdb/testsuite] Fix gdb.base/infoline-reloc-main-from-zero.exp with clang
+ With test-case gdb.base/infoline-reloc-main-from-zero.exp and clang I run into:
+ ...
+ gdb compile failed, clang-13.0: warning: -e main: 'linker' input unused \
+ [-Wunused-command-line-argument]
+ clang-13.0: warning: -Wl,-Ttext=0x00: 'linker' input unused \
+ [-Wunused-command-line-argument]
+ clang-13.0: warning: -Wl,-N: 'linker' input unused \
+ [-Wunused-command-line-argument]
+ UNTESTED: gdb.base/infoline-reloc-main-from-zero.exp: \
+ infoline-reloc-main-from-zero.exp
+ UNTESTED: gdb.base/infoline-reloc-main-from-zero.exp: failed to compile
+ ...
+
+ Fix this by using ldflags instead of additional_flags.
+
+ Likewise, fix all occurrences of:
+ ...
+ $ find gdb/testsuite -name *.exp | xargs grep additional_flags.*Wl
+ ...
+
+ Tested on x86_64-linux.
+
+2022-10-14 Tom de Vries <tdevries@suse.de>
+
+ [gdb/testsuite] Fix nopie test-cases with target board unix/-fPIE/-pie
+ Compilers default to either PIE or no-PIE executables.
+
+ In order to test PIE executables with a compiler that produces non-PIE by
+ default, we can use target board unix/-fPIE/-pie, which set the multilib_flags
+ of the target board to "-fPIE -pie".
+
+ Likewise, we can use target board unix/-fno-PIE/-no-pie with a compiler that
+ produces PIE by default.
+
+ The target board unix/-fno-PIE/-no-pie has a potential problem when compiling
+ shared libs, because the multilib_flags will override the attempts of
+ gdb_compile_shlib to compile with -fPIC. This is taken care of by running the
+ body of gdb_compile_shlib wrapped in with_PIE_multilib_flags_filtered.
+
+ The target board unix/-fPIE/-pie has a problem with nopie compilations. The
+ current approach is to do the compilation hoping for the best, and if we find
+ out that the resulting executable is PIE despite specifying nopie, we error
+ out with the standard error message "nopie failed to prevent PIE executable".
+
+ That however does not work for hard-coded assembly nopie test-cases, which will
+ just noisily refuse to compile:
+ ...
+ ld: amd64-disp-step0.o: relocation R_X86_64_32S against `.text' can not be \
+ used when making a PIE object; recompile with -fPIE^M
+ ...
+
+ Fix this in gdb_compile by filtering out the PIE settings in the target board
+ multilib_flags when pie or nopie is specified.
+
+ Tested on x86_64-linux.
+
+2022-10-14 Tom de Vries <tdevries@suse.de>
+
+ [gdb/testsuite] Factor out with_PIE_multilib_flags_filtered
+ Factor out new procs with_PIE_multilib_flags_filtered and
+ with_multilib_flags_filtered from proc gdb_compile_shlib.
+
+ Tested on x86_64-linux.
+
+2022-10-14 Tom de Vries <tdevries@suse.de>
+
+ [gdb/testsuite] Add cond_wrap proc
+ Add a new proc cond_wrap, that can be used to replace the repetitive:
+ ...
+ if { $cond } {
+ wrap {
+ <body>
+ }
+ } else {
+ <body>
+ }
+ ...
+ with the shorter:
+ ...
+ cond_wrap $cond wrap {
+ <body>
+ }
+ ...
+
+ Tested on x86_64-linux.
+
+2022-10-14 Torbjörn SVENSSON <torbjorn.svensson@foss.st.com>
+
+ gdb: add Torbjörn Svensson to gdb/MAINTAINERS
+
+2022-10-14 Jan Beulich <jbeulich@suse.com>
+
+ RISC-V: Zicbo{m,p,z} adjustments to riscv_multi_subset_supports_ext()
+ The lack thereof did caused gas to issue "internal: unreachable
+ INSN_CLASS_*" errors when trying to assemble respective insns without
+ the feature(s) enabled via e.g. ".option arch, ...". Of course a proper
+ hint towards the missing extension then wasn't given either.
+
+2022-10-14 Tsukasa OI <research_trasio@irq.a4lg.com>
+
+ RISC-V: Imply 'Zicsr' from privileged extensions with CSRs
+ 'H', 'Smstateen', 'Sscofpmf' and 'Sstc' are four privileged extensions with
+ their CSR definitions and 'Smepmp' is a privileged extension with additional
+ CSR bits.
+
+ Volume II: Privileged Architecture of the RISC-V ISA Manual states that the
+ privileged architecture requires the 'Zicsr' extension. However, current
+ GNU Binutils has no direct way whether the program has dependency to the
+ privileged architecture itself.
+
+ As a workaround, we should add implications from privileged extensions that
+ either add new CSRs, extend existing CSRs or depends on using CSRs.
+
+ This commit adds such implications for existing privileged extensions that
+ satisfy this condition.
+
+ gas/ChangeLog:
+
+ * testsuite/gas/riscv/march-imply-h.d: New test, at least for 'H'.
+
+ bfd/ChangeLog:
+
+ * elfxx-riscv.c (riscv_implicit_subsets): Add 'Zicsr'
+ implicications for privileged extensions 'H', 'Smstateen',
+ 'Sscofpmf', 'Sstc' and 'Smepmp'.
+
+2022-10-14 Tsukasa OI <research_trasio@irq.a4lg.com>
+
+ opcodes/riscv-dis.c: Remove last_map_state
+ Before changing the core disassembler, we take care of minor code clarity
+ issues and improve readability.
+
+ This commit removes unused variable last_map_state (set by the
+ print_insn_riscv function but not read anywhere else).
+
+ opcodes/ChangeLog:
+
+ * riscv-dis.c (last_map_state): Remove.
+ (print_insn_riscv): Remove setting last_map_state.
+
+2022-10-14 Tsukasa OI <research_trasio@irq.a4lg.com>
+
+ opcodes/riscv-dis.c: Make XLEN variable static
+ Before changing the core disassembler, we take care of minor code clarity
+ issues and improve readability.
+
+ Since xlen variable is not (and should not) used outside riscv-dis.c,
+ this commit makes this variable static.
+
+ opcodes/ChangeLog:
+
+ * riscv-dis.c (xlen): Make this variable static.
+
+2022-10-14 Tsukasa OI <research_trasio@irq.a4lg.com>
+
+ opcodes/riscv-dis.c: Use bool type whenever possible
+ Before changing the core disassembler, we take care of minor code clarity
+ issues and improve readability.
+
+ This commit replaces uses of int with bool whenever possible.
+
+ opcodes/ChangeLog:
+
+ * riscv-dis.c (no_aliases) Change type to bool.
+ (set_default_riscv_dis_options): Use boolean.
+ (parse_riscv_dis_option_without_args): Likewise.
+ (riscv_disassemble_insn): Use boolean keywords.
+
+2022-10-14 Tsukasa OI <research_trasio@irq.a4lg.com>
+
+ opcodes/riscv-dis.c: Tidying with spacing
+ Before changing the core disassembler, we take care of minor code clarity
+ issues and improve readability.
+
+ This commit takes care of improper spacing for code clarity.
+
+ opcodes/ChangeLog:
+
+ * riscv-dis.c (riscv_disassemble_insn): Tidying with spacing.
+
+2022-10-14 Tsukasa OI <research_trasio@irq.a4lg.com>
+
+ opcodes/riscv-dis.c: Tidying with comments/clarity
+ Before changing the core disassembler, we take care of minor code clarity
+ issues and improve readability.
+
+ First, we need to clarify the roles of variables and code portions.
+
+ opcodes/ChangeLog:
+
+ * riscv-dis.c (xlen): Move before default_isa_spec. Add comment.
+ (default_isa_spec, default_priv_spec): Add comment.
+ (riscv_gpr_names, riscv_fpr_names): Likewise.
+ (parse_riscv_dis_option_without_args): Likewise.
+ (parse_riscv_dis_option, parse_riscv_dis_options): Likewise.
+ (maybe_print_address): Likewise.
+ (riscv_disassemble_insn): Fix comment about the Zfinx "extension".
+ Add comment about the riscv_multi_subset_supports call.
+
+2022-10-14 Tsukasa OI <research_trasio@irq.a4lg.com>
+
+ RISC-V: Test DWARF register number for "fp"
+ This commit adds "fp" (x8 or s0) to dw-regnums.{s,d}.
+
+ gas/ChangeLog:
+
+ * testsuite/gas/riscv/dw-regnums.s: Add "fp".
+ * testsuite/gas/riscv/dw-regnums.d: Likewise.
+
+2022-10-14 Tsukasa OI <research_trasio@irq.a4lg.com>
+
+ RISC-V: Move standard hints before all instructions
+ Because all standard hints must be placed before corresponding instruction
+ for the disassembler, they may taint basic RVI instruction section.
+
+ This commit moves all standard hints before all basic RVI instructions
+ to improve maintainability.
+
+ opcodes/ChangeLog:
+
+ * riscv-opc.c (riscv_opcodes): Move all standard hints before all
+ standard instructions.
+
+2022-10-14 Tsukasa OI <research_trasio@irq.a4lg.com>
+
+ RISC-V: Move certain arrays to riscv-opc.c
+ This is a part of small tidying (declare tables in riscv-opc.c).
+
+ include/ChangeLog:
+
+ * opcode/riscv.h (riscv_rm, riscv_pred_succ): Move declarations to
+ opcodes/riscv-opc.c. New non-static definitions.
+
+ opcodes/ChangeLog:
+
+ * riscv-opc.c (riscv_rm, riscv_pred_succ): Move from
+ include/opcode/riscv.h. Add description.
+
+2022-10-14 Fangrui Song <i@maskray.me>
+
+ ld: Add --undefined-version
+ This cancels a previous --no-undefined-version.
+ gold has had --undefined-version for a long time.
+
+2022-10-14 GDB Administrator <gdbadmin@sourceware.org>
+
+ Automatic date update in version.in
+
+2022-10-13 Carl Love <cel@us.ibm.com>
+
+ PowerPC, fix gdb.base/watchpoint.exp on Power 9
+ Test gdb.base/watchpoint.exp generates 4 test errors on Power 9. The
+ test uses the test [target_info exists gdb,no_hardware_watchpoints] to
+ determine if the processor supports hardware watchpoints. The check
+ only examines the processor type to determine if it supports hardware
+ watchpoints.
+
+ The PowerPC processors support hardware watchpoints with the
+ exception of Power 9. The hardware watchpoint support is disabled on
+ Power 9. The test skip_hw_watchpoint_tests must be used to correctly
+ determine if the PowerPC processor supports hardware watchpoints.
+
+ This patch replaces the [target_info exists gdb,no_hardware_watchpoints]
+ with the skip_hw_watchpoint_tests_p check. With the patch, the test runs
+ on Power 9 with hardware watchpoint force-disabled. The test runs on
+ all other PowerPC processors with and without hardware watchpoints
+ enabled.
+
+ The patch has been tested on Power 9 to verify the test only runs with
+ hardware breakpoints disabled. The patch has been tested on X86-64 with
+ no regression failures. The test fails on Power 10 due to an internal GDB
+ error due to resource management. The resource management issue will be
+ addressed in another patch.
+
+2022-10-13 Tom de Vries <tdevries@suse.de>
+
+ [gdb/testsuite] Fix gdb.dwarf2/macro-source-path.exp with -m32
+ With test-case gdb.dwarf2/macro-source-path.exp and target board unix/-m32, I
+ run into:
+ ...
+ as: macro-source-path-gcc11-ld238-dw5-filename-641.o: \
+ unsupported relocation type: 0x1^M
+ ...
+
+ The problem is that we have 64-bit dwarf so the debug_line offset in the
+ .debug_macro section is an 8-byte entity, emitted using ".8byte":
+ ...
+ .section .debug_macro
+ .Lcu_macros4:
+ .2byte 5 /* version */
+ .byte 3 /* flags */
+ .8byte .LLlines3 /* debug_line offset */
+ ...
+ but the linker doesn't support 8-byte relocation types on a 32-bit architecture.
+
+ This is similar to what was fixed in commit a5ac8e7fa3b
+ ("[gdb/testsuite] Fix 64-bit dwarf test-cases with -m32") for for instance
+ .debug_abbrev.
+
+ Fix this in the same way, by using _op_offset to emit the debug_line offset.
+
+ Tested on x86_64-linux with native and target board unix/-m32.
+
+2022-10-13 Tom de Vries <tdevries@suse.de>
+
+ [gdb/testsuite] Fix gdb.dwarf2/entry-value-typedef.exp with -m32
+ With test-case gdb.dwarf2/entry-value-typedef.exp and target board unix/-m32,
+ I run into:
+ ...
+ builtin_spawn -ignore SIGHUP g++ -fno-stack-protector \
+ gdb/testsuite/gdb.dwarf2/entry-value-typedef-amd64.S \
+ -fdiagnostics-color=never -Lbuild/libiberty -lm -m32 \
+ -o outputs/gdb.dwarf2/entry-value-typedef/entry-value-typedef^M
+ entry-value-typedef.cpp: Assembler messages:^M
+ entry-value-typedef.cpp:38: Error: bad register name `%rbp'^M
+ ...
+
+ The problem is that the test-cases selects an amd64 .S file based on the check:
+ ...
+ if { [istarget "x86_64-*-linux*"] } {
+ ...
+ which is also true for target board unix/-m32 on x86_64-linux.
+
+ Fix this by adding the missing is_lp64_target check.
+
+ Tested on x86_64-linux, using native and target board unix/-m32.
+
+2022-10-13 Tom de Vries <tdevries@suse.de>
+
+ [gdb/testsuite] Fix gdb.mi/mi-disassemble.exp with -m32
+ With target board unix/-m32 and test-case gdb.mi/mi-disassemble.exp we have:
+ ...
+ (gdb) ^M
+ print/x *((unsigned char *) 0x8048485)^M
+ &"print/x *((unsigned char *) 0x8048485)\n"^M
+ ~"$9 = 0x83\n"^M
+ ^done^M
+ (gdb) ^M
+ PASS: gdb.mi/mi-disassemble.exp: get valueof "*((unsigned char *) 0x8048485)"
+ FAIL: gdb.mi/mi-disassemble.exp: byte at 0x8048485 matches
+ ...
+ The test-case passes with native.
+
+ With native we see in gdb.log that variable longest_insn_bytes is:
+ ...
+ Longest instruction at 0x0000000000400549 with bytes '48 8b 05 20 01 00 00'
+ ...
+ and variable split_bytes (added debug puts) ends up as:
+ ...
+ SPLIT_BYTES: 48 8b 05 20 01 00 00
+ ...
+
+ But with unix/-m32 we have longest_insn_byte:
+ ...
+ Longest instruction at 0x08048481 with bytes '8d 4c 24 04 '
+ ...
+ and split_bytes ends up as:
+ ...
+ SPLIT_BYTES: 8d 4c 24 04 {} {} {} {} {} {} {} {}
+ ...
+ so the trailing whitespace is translated by split to empty bytes, and the
+ mismatch FAILs are generated for those.
+
+ Fix this by stripping the whitespace, which makes us end up with a different
+ and indeed longer insn:
+ ...
+ Longest instruction at 0x08048492 with bytes 'dd 05 98 85 04 08'
+ ...
+
+ Tested on x86_64-linux, with native and target board unix/-m32.
+
+2022-10-13 GDB Administrator <gdbadmin@sourceware.org>
+
+ Automatic date update in version.in
+
+2022-10-12 Carl Love <cel@us.ibm.com>
+
+ PowerPC, fix test gdb.base/watchpoint-stops-at-right-insn.exp
+ Test gdb.base/watchpoint-stops-at-right-insn.exp generates 4 test errors
+ on Power 9. The test uses the test [target_info exists gdb,
+ no_hardware_watchpoints] to determine if the processor supports hardware
+ watchpoints. The check only examines the processor type to determine if
+ it supports hardware watchpoints. Note, the test works fine on Power 10.
+
+ The PowerPC processors support hardware watchpoints with the
+ exception of Power 9. The hardware watchpoint support is disabled on
+ Power 9. The test skip_hw_watchpoint_tests must be used to correctly
+ determine if the PowerPC processor supports hardware watchpoints.
+
+ This patch replaces the [target_info exists gdb,no_hardware_watchpoints]
+ with the skip_hw_watchpoint_tests_p check. With the patch, the test is
+ disabled on Power 9 but runs on all other PowerPC processors.
+
+ The patch has been tested on Power 9, Power 10 and X86-64 with no
+ regression failures.
+
+2022-10-12 Jan Beulich <jbeulich@suse.com>
+
+ x86: drop "regmask" static variable
+ Replace its two uses by more direct checks, paralleling what's already
+ there for SIMD registers.
+
+2022-10-12 Tom de Vries <tdevries@suse.de>
+
+ [gdb/symtab] Factor out elf_symfile_read_dwarf2
+ Factor out elf_symfile_read_dwarf2 from elf_symfile_read. NFC.
+
+ Tested on x86_64-linux.
+
+2022-10-12 Tom de Vries <tdevries@suse.de>
+
+ [gdb/testsuite] Fix ctf test-cases on openSUSE Tumbleweed
+ When running test-case gdb.base/ctf-constvars.exp on openSUSE Tumbleweed (with
+ system gcc version 12, providing gcc -gctf support, enabling the ctf test-cases
+ in the gdb testsuite), I run into:
+ ...
+ (gdb) print vox^M
+ 'vox' has unknown type; cast it to its declared type^M
+ (gdb) FAIL: gdb.base/ctf-constvars.exp: print vox
+ ...
+
+ There are two causes for this:
+ - the linker flags are missing --ctf-variables, so the information for variable
+ vox is missing (reported in PR29468), and
+ - the executable contains some dwarf2 due to some linked-in glibc objects,
+ so the ctf info is ignored (reported in PR29160).
+
+ By using:
+ - -Wl,--ctf-variable,
+ - -Wl,--strip-debug, and
+ we can make the test-case and some similar test-cases pass.
+
+ Tested on x86_64-linux.
+
+ Bug: https://sourceware.org/bugzilla/show_bug.cgi?id=29160
+ Bug: https://sourceware.org/bugzilla/show_bug.cgi?id=29468
+
+2022-10-12 Tom de Vries <tdevries@suse.de>
+
+ [gdb/testsuite] Silence warnings about obsolete -gstabs
+ When running test-case gdb.base/gdbindex-stabs.exp on openSUSE Tumbleweed (with
+ gcc 12) I get:
+ ...
+ gdb compile failed, gdb/testsuite/gdb.base/gdbindex-stabs.c: warning: \
+ STABS debugging information is obsolete and not supported anymore
+ ...
+
+ Silence the warning by passing quiet to gdb_compile. Likewise in two other
+ test-cases.
+
+2022-10-12 Tom de Vries <tdevries@suse.de>
+
+ [gdb/testsuite] Replace remaining -gt with -gctf
+ With test-cases gdb.base/cvexpr.exp and gdb.base/whatis.exp I run into:
+ ...
+ gdb compile failed, gcc: error: unrecognized debug output level 't'
+ ...
+
+ This is due to using additional_flags=-gt.
+
+ Commit ffb3f587933 ("CTF: multi-CU and archive support") replaced
+ additional_flags=-gt with additional_flags=-gctf in gdb.ctf/*.exp and
+ gdb.base/ctf-*.exp.
+
+ Do the same in these two test-cases.
+
+ Tested on x86_64-linux.
+
+2022-10-12 Tom de Vries <tdevries@suse.de>
+
+ [gdb/testsuite] Fix gdb.base/infoline-reloc-main-from-zero.exp with recent ld
+ On openSUSE Tumbleweed (with ld 2.39) and test-case
+ gdb.base/infoline-reloc-main-from-zero.exp, I get:
+ ...
+ gdb compile failed, ld: warning: infoline-reloc-main-from-zero has a LOAD \
+ segment with RWX permissions
+ UNTESTED: gdb.base/infoline-reloc-main-from-zero.exp: \
+ infoline-reloc-main-from-zero.exp
+ ...
+
+ Fix this by compiling with -Wl,--no-warn-rwx-segments.
+
+ Tested on x86_64-linux.
+
+2022-10-12 Tom de Vries <tdevries@suse.de>
+
+ [gdb/testsuite] Fix gdb.base/nested-subp{2,3}.exp with recent ld
+ On openSUSE Tumbleweed (with ld 2.39) I get for test-case
+ gdb.base/nested-subp2.exp:
+ ...
+ gdb compile failed, ld: warning: tmp.o: requires executable stack \
+ (because the .note.GNU-stack section is executable)
+ ...
+
+ Fix this by compiling with -Wl,--no-warn-execstack.
+
+ Likewise in gdb.base/nested-subp3.exp
+
+ Tested on x86_64-linux.
+
+2022-10-12 Tom de Vries <tdevries@suse.de>
+
+ [gdb/testsuite] Remove unnecessary perror in some test-cases
+ On openSUSE Tumbleweed I noticed:
+ ...
+ UNTESTED: gdb.dwarf2/fission-absolute-dwo.exp: fission-absolute-dwo.exp
+ ERROR: failed to compile fission-absolute-dwo
+ ...
+
+ The ERROR is unnecessary, given that an UNTESTED is already emitted.
+
+ Furthermore, it could be argued that it is incorrect because it's not a
+ testsuite error to not be able to compile something, and UNTESTED or
+ UNSUPPORTED is more appropriate.
+
+ Remove the perror call, likewise in fission-relative-dwo.exp.
+
+ Tested on x86_64-linux.
+
+2022-10-12 Nick Clifton <nickc@redhat.com>
+
+ Fix objcopy's error message when it cannot add a .gnu_debuglink section because the section already exists.
+ PR 29665
+ * objcopy.c (copy_object): Use the input filename when
+ reporting that a .gnu_debuglink section already exists.
+
+2022-10-12 Tsukasa OI <research_trasio@irq.a4lg.com>
+
+ sim/ppc: Fix core_find_mapping diagnostics
+ Because "%p" is the pointer conversion specifier to print a pointer in an
+ implementation-defined manner, the result with format string containing
+ "0x%p" can be strange. For instance, core_map_find_mapping prints error
+ containing "0x0x...." (processor is not NULL) or "0x(null)" (processor is
+ NULL) on glibc.
+
+ This commit replaces "0x%p" with "%p" to prevent unpredictable behavior.
+
+2022-10-12 Andrew Burgess <aburgess@redhat.com>
+
+ sim/ppc: fixes for arguments to printf style functions
+ After the recent series of fixes to mark more functions in the
+ simulator with ATTRIBUTE_PRINTF, there were some build failures in the
+ ppc sim due, in some cases, to bugs with the arguments being passed,
+ and in other cases, the issues were (maybe) less serious, with
+ arguments being the wrong size, or type, for the printf format being
+ used.
+
+ This commit fixes all of the issues that I ran into.
+
+ In each case I selected the easiest solution to the problem, which is
+ usually just casting the argument to the correct type. If anyone
+ later on thinks the print format should change, please feel free to do
+ that. What we have here should keep the simulator basically working
+ as it does currently, which is my goal with this commit.
+
+2022-10-12 Tom de Vries <tdevries@suse.de>
+
+ [gdb/contrib] Use OBJCOPY everywhere in cc-with-tweaks.sh
+ I noticed that the $want_gnu_debuglink code in gdb/contrib/cc-with-tweaks.sh
+ uses objcopy instead of $OBJCOPY. Fix this.
+
+ Script checked with shellcheck, no new warnings added.
+
+ Tested on x86_64-linux.
+
+2022-10-12 Simon Marchi <simon.marchi@efficios.com>
+
+ Re-apply "Pass PKG_CONFIG_PATH down from top-level Makefile"
+ Commit 228cf97dd3c8 ("Merge configure.ac from gcc project") undid the
+ change originally done in de83289ef32e ("Pass PKG_CONFIG_PATH down from
+ top-level Makefile"). Re-apply it.
+
+ Change-Id: I91138dfca41c43b05e53e445f62e4b27882536bf
+
+2022-10-12 Simon Marchi <simon.marchi@polymtl.ca>
+
+ gdb: rename target_read_auxv(target_ops *) to target_read_auxv_raw
+ Having two overloads of target_read_auxv that don't have the same goals
+ is confusing. Rename the one that reads from an explicit target_ops to
+ target_read_auxv_raw. Also, it occured to me that the non-raw version
+ could use the raw version, that reduces duplication a bit.
+
+ Change-Id: I28e5f7cecbfcacd0174d4686efb3e4a23b4ad491
+
+2022-10-12 GDB Administrator <gdbadmin@sourceware.org>
+
+ Automatic date update in version.in
+
+2022-10-12 Alan Modra <amodra@gmail.com>
+
+ Re: Merge configure.ac from gcc project
+ Also copy over config.acx.m4, and regenerate.
+
+2022-10-11 Simon Marchi <simon.marchi@polymtl.ca>
+
+ gdb: fix auxv caching
+ There's a flaw in the interaction of the auxv caching and the fact that
+ target_auxv_search allows reading auxv from an arbitrary target_ops
+ (passed in as a parameter). This has consequences as explained in this
+ thread:
+
+ https://inbox.sourceware.org/gdb-patches/20220719144542.1478037-1-luis.machado@arm.com/
+
+ In summary, when loading an AArch64 core file with MTE support by
+ passing the executable and core file names directly to GDB, we see the
+ MTE info:
+
+ $ ./gdb -nx --data-directory=data-directory -q aarch64-mte-gcore aarch64-mte-gcore.core
+ ...
+ Program terminated with signal SIGSEGV, Segmentation fault
+ Memory tag violation while accessing address 0x0000ffff8ef5e000
+ Allocation tag 0x1
+ Logical tag 0x0.
+ #0 0x0000aaaade3d0b4c in ?? ()
+ (gdb)
+
+ But if we do it as two separate commands (file and core) we don't:
+
+ $ ./gdb -nx --data-directory=data-directory -q -ex "file aarch64-mte-gcore" -ex "core aarch64-mte-gcore.core"
+ ...
+ Program terminated with signal SIGSEGV, Segmentation fault.
+ #0 0x0000aaaade3d0b4c in ?? ()
+ (gdb)
+
+ The problem with the latter is that auxv data gets improperly cached
+ between the two commands. When executing the file command, auxv gets
+ first queried here, when loading the executable:
+
+ #0 target_auxv_search (ops=0x55555b842400 <exec_ops>, match=0x9, valp=0x7fffffffc5d0) at /home/simark/src/binutils-gdb/gdb/auxv.c:383
+ #1 0x0000555557e576f2 in svr4_exec_displacement (displacementp=0x7fffffffc8c0) at /home/simark/src/binutils-gdb/gdb/solib-svr4.c:2482
+ #2 0x0000555557e594d1 in svr4_relocate_main_executable () at /home/simark/src/binutils-gdb/gdb/solib-svr4.c:2878
+ #3 0x0000555557e5989e in svr4_solib_create_inferior_hook (from_tty=1) at /home/simark/src/binutils-gdb/gdb/solib-svr4.c:2933
+ #4 0x0000555557e6e49f in solib_create_inferior_hook (from_tty=1) at /home/simark/src/binutils-gdb/gdb/solib.c:1253
+ #5 0x0000555557f33e29 in symbol_file_command (args=0x7fffffffe01c "aarch64-mte-gcore", from_tty=1) at /home/simark/src/binutils-gdb/gdb/symfile.c:1655
+ #6 0x00005555573319c3 in file_command (arg=0x7fffffffe01c "aarch64-mte-gcore", from_tty=1) at /home/simark/src/binutils-gdb/gdb/exec.c:555
+ #7 0x0000555556e47185 in do_simple_func (args=0x7fffffffe01c "aarch64-mte-gcore", from_tty=1, c=0x612000047740) at /home/simark/src/binutils-gdb/gdb/cli/cli-decode.c:95
+ #8 0x0000555556e551c9 in cmd_func (cmd=0x612000047740, args=0x7fffffffe01c "aarch64-mte-gcore", from_tty=1) at /home/simark/src/binutils-gdb/gdb/cli/cli-decode.c:2543
+ #9 0x00005555580e63fd in execute_command (p=0x7fffffffe02c "e", from_tty=1) at /home/simark/src/binutils-gdb/gdb/top.c:692
+ #10 0x0000555557771913 in catch_command_errors (command=0x5555580e55ad <execute_command(char const*, int)>, arg=0x7fffffffe017 "file aarch64-mte-gcore", from_tty=1, do_bp_actions=true) at /home/simark/src/binutils-gdb/gdb/main.c:513
+ #11 0x0000555557771fba in execute_cmdargs (cmdarg_vec=0x7fffffffd570, file_type=CMDARG_FILE, cmd_type=CMDARG_COMMAND, ret=0x7fffffffd230) at /home/simark/src/binutils-gdb/gdb/main.c:608
+ #12 0x00005555577755ac in captured_main_1 (context=0x7fffffffda10) at /home/simark/src/binutils-gdb/gdb/main.c:1299
+ #13 0x0000555557775c2d in captured_main (data=0x7fffffffda10) at /home/simark/src/binutils-gdb/gdb/main.c:1320
+ #14 0x0000555557775cc2 in gdb_main (args=0x7fffffffda10) at /home/simark/src/binutils-gdb/gdb/main.c:1345
+ #15 0x00005555568bdcbe in main (argc=10, argv=0x7fffffffdba8) at /home/simark/src/binutils-gdb/gdb/gdb.c:32
+
+ Here, target_auxv_search is called on the inferior's target stack. The
+ target stack only contains the exec target, so the query returns empty
+ auxv data. This gets cached for that inferior in `auxv_inferior_data`.
+
+ In its constructor (before it is pushed to the inferior's target stack),
+ the core_target needs to identify the right target description from the
+ core, and for that asks the gdbarch to read a target description from
+ the core file. Because some implementations of
+ gdbarch_core_read_description (such as AArch64's) need to read auxv data
+ from the core in order to determine the right target description, the
+ core_target passes a pointer to itself, allowing implementations to call
+ target_auxv_search it. However, because we have previously cached
+ (empty) auxv data for that inferior, target_auxv_search searched that
+ cached (empty) auxv data, not auxv data read from the core. Remember
+ that this data was obtained by reading auxv on the inferior's target
+ stack, which only contained an exec target.
+
+ The problem I see is that while target_auxv_search offers the
+ flexibility of reading from an arbitrary (passed as an argument) target,
+ the caching doesn't do the distinction of which target is being queried,
+ and where the cached data came from. So, you could read auxv from a
+ target A, it gets cached, then you try to read auxv from a target B, and
+ it returns the cached data from target A. That sounds wrong. In our
+ case, we expect to read different auxv data from the core target than
+ what we have read from the target stack earlier, so it doesn't make
+ sense to hit the cache in this case.
+
+ To fix this, I propose splitting the code paths that read auxv data from
+ an inferior's target stack and those that read from a passed-in target.
+ The code path that reads from the target stack will keep caching,
+ whereas the one that reads from a passed-in target won't. And since,
+ searching in auxv data is independent from where this data came from,
+ split the "read" part from the "search" part.
+
+ From what I understand, auxv caching was introduced mostly to reduce
+ latency on remote connections, when doing many queries. With the change
+ I propose, only the queries done while constructing the core_target
+ end up not using cached auxv data. This is fine, because there are just
+ a handful of queries max, done at this point, and reading core files is
+ local.
+
+ The changes to auxv functions are:
+
+ - Introduce 2 target_read_auxv functions. One reads from an explicit
+ target_ops and doesn't do caching (to be used in
+ gdbarch_core_read_description context). The other takes no argument,
+ reads from the current inferior's target stack (it looks just like a
+ standard target function wrapper) and does caching.
+
+ The first target_read_auxv actually replaces get_auxv_inferior_data,
+ since it became a trivial wrapper around it.
+
+ - Change the existing target_auxv_search to not read auxv data from the
+ target, but to accept it as a parameter (a gdb::byte_vector). This
+ function doesn't care where the data came from, it just searches in
+ it. It still needs to take a target_ops and gdbarch to know how to
+ parse auxv entries.
+
+ - Add a convenience target_auxv_search overload that reads auxv
+ data from the inferior's target stack and searches in it. This
+ overload is useful to replace the exist target_auxv_search calls that
+ passed the `current_inferior ()->top_target ()` target and keep the
+ call sites short.
+
+ - Modify parse_auxv to accept a target_ops and gdbarch to use for
+ parsing entries. Not strictly related to the rest of this change,
+ but it seems like a good change in the context.
+
+ Changes in architecture-specific files (tdep and nat):
+
+ - In linux-tdep, linux_get_hwcap and linux_get_hwcap2 get split in two,
+ similar to target_auxv_search. One version receives auxv data,
+ target and arch as parameters. The other gets everything from the
+ current inferior. The latter is for convenience, to avoid making
+ call sites too ugly.
+
+ - Call sites of linux_get_hwcap and linux_get_hwcap2 are adjusted to
+ use either of the new versions. The call sites in
+ gdbarch_core_read_description context explicitly read auxv data from
+ the passed-in target and call the linux_get_hwcap{,2} function with
+ parameters. Other call sites use the versions without parameters.
+
+ - Same idea for arm_fbsd_read_description_auxv.
+
+ - Call sites of target_auxv_search that passed
+ `current_inferior ()->top_target ()` are changed to use the
+ target_auxv_search overload that works in the current inferior.
+
+ Reviewed-By: John Baldwin <jhb@FreeBSD.org>
+ Reviewed-By: Luis Machado <luis.machado@arm.com>
+ Change-Id: Ib775a220cf1e76443fb7da2fdff8fc631128fe66
+
+2022-10-11 Tom de Vries <tdevries@suse.de>
+
+ [gdb/testsuite] Fix gdb.debuginfod/fetch_src_and_symbols.exp with native-gdbserver
+ When running test-case gdb.debuginfod/fetch_src_and_symbols.exp with target
+ board native-gdbserver, I get:
+ ...
+ Running gdb.debuginfod/fetch_src_and_symbols.exp ...
+ ERROR: tcl error sourcing gdb.debuginfod/fetch_src_and_symbols.exp.
+ ERROR: gdbserver does not support start without extended-remote
+ while executing
+ "error "gdbserver does not support $command without extended-remote""
+ (procedure "gdb_test_multiple" line 51)
+ invoked from within
+ "gdb_test_multiple $command $message {*}$opts $user_code"
+ (procedure "gdb_test" line 56)
+ invoked from within
+ "gdb_test "start" "Temporary breakpoint.*""
+ ...
+
+ Fix this by replacing gdb_test "start" with runto_main.
+
+ Tested on x86_64-linux.
+
+2022-10-11 Nick Clifton <nickc@redhat.com>
+
+ Re: Error: attempt to get value of unresolved symbol `L0'
+ * symbols.c (S_GET_VALUE): If the unresolved symbol is the fake
+ label provide a more helpful error message to the user.
+ (S_GET_VALUE_WHERE): Like S_GET_VALUE, but includes a file/line
+ number for error reporting purposes.
+ * symbols.h (S_GET_VALUE_WHERE): Prototype.
+ * write.c (fixup_segment): Use S_GET_VALUE_WHERE.
+
+2022-10-11 Tsukasa OI <research_trasio@irq.a4lg.com>
+
+ sim: Initialize pbb_br_* by default
+ On the files generated by sim/common/genmloop.sh, variables pbb_br_type and
+ pbb_br_npc are declared uninitialized and passed to other functions in some
+ cases. Despite that those are harmless, they will generate GCC warnings
+ ("-Wmaybe-uninitialized").
+
+ This commit ensures that pbb_br_type and pbb_br_npc variables are
+ initialized to a harmless value.
+
+2022-10-11 Tsukasa OI <research_trasio@irq.a4lg.com>
+
+ sim: Check known getopt definition existence
+ Clang generates a warning if there is a function declaration/definition
+ with zero arguments. Such declarations/definitions without a prototype (an
+ argument list) are deprecated forms of indefinite arguments
+ ("-Wdeprecated-non-prototype"). On the default configuration, it causes a
+ build failure (unless "--disable-werror" is specified).
+
+ include/getopt.h defines some getopt function definitions but one of them
+ has a form "extern int getopt ();". If this form is selected in
+ include/getopt.h, Clang generates a warning and the build fails by default.
+
+ In really old environments, this getopt definition with no arguments is
+ necessary (because the definition may change between environments).
+ However, this definition is now a cause of problems on modern environments.
+
+ A good news is, this definition is not always selected (e.g. if used by
+ binutils/*.c). This is because configuration scripts of binutils, gas,
+ gprof and ld tries to find known definition of getopt function is used and
+ defines HAVE_DECL_GETOPT macro. If this macro is defined when getopt.h is
+ included, a good form of getopt is used and Clang won't generate warnings.
+
+ This commit adds a modified portion of ld/configure.ac to find the known
+ getopt definition. If we could find one (and we *will* in most modern
+ environments), we don't need to rely on the deprecated definition.
+
+2022-10-11 Tsukasa OI <research_trasio@irq.a4lg.com>
+ Andrew Burgess <aburgess@redhat.com>
+
+ sim: Suppress non-literal printf warning
+ Clang generates a warning if the format string of a printf-like function is
+ not a literal ("-Wformat-nonliteral"). On the default configuration, it
+ causes a build failure (unless "--disable-werror" is specified).
+
+ To avoid this warning, this commit now uses vsnprintf to format error
+ message and pass the message to sim_engine_abort function with another
+ printf-style formatting.
+
+ This patch is mostly authored by Andrew Burgess and slightly modified by
+ Tsukasa OI.
+
+2022-10-11 Tsukasa OI <research_trasio@irq.a4lg.com>
+
+ sim: Make WITH_{TRACE,PROFILE}-based macros bool
+ Clang generates a warning if there is an ambiguous expression (possibly a
+ bitwise operation (& or |), but a logical operator (&& or ||) is used;
+ "-Wconstant-logical-operand"). On the default configuration, it causes a
+ build failure (unless "--disable-werror" is specified).
+
+ This is caused by predicate macros that use the form (base_variable & flag).
+ Clang considers them as regular integer values (not boolean) and
+ generates that warning.
+
+ This commit makes Clang think those predicate macros to be boolean.
+
+2022-10-11 Tsukasa OI <research_trasio@irq.a4lg.com>
+
+ sim: Remove self-assignments
+ Clang generates a warning if there is a redundant self-assignment
+ ("-Wself-assign"). On the default configuration, it causes a build failure
+ (unless "--disable-werror" is specified).
+
+ This commit removes redundant self-assignments from two files.
+
+2022-10-11 Tsukasa OI <research_trasio@irq.a4lg.com>
+
+ sim/rl78: Add ATTRIBUTE_PRINTF
+ Clang generates a warning if the format string of a printf-like function is
+ not a literal ("-Wformat-nonliteral"). On the default configuration, it
+ causes a build failure (unless "--disable-werror" is specified).
+
+ To avoid warnings on the printf-like wrapper, it requires proper
+ __attribute__((format)) and we have ATTRIBUTE_PRINTF macro for this reason.
+
+ This commit adds ATTRIBUTE_PRINTF to the printf-like functions.
+
+2022-10-11 Tsukasa OI <research_trasio@irq.a4lg.com>
+
+ sim/ppc: Add ATTRIBUTE_PRINTF
+ Clang generates a warning if the format string of a printf-like function is
+ not a literal ("-Wformat-nonliteral"). On the default configuration, it
+ causes a build failure (unless "--disable-werror" is specified).
+
+ To avoid warnings on the printf-like wrapper, it requires proper
+ __attribute__((format)) and we have ATTRIBUTE_PRINTF macro for this reason.
+
+ This commit adds ATTRIBUTE_PRINTF to the printf-like functions.
+
+ For the error function defined in sim_calls.c, the ATTRIBUTE_NORETURN
+ has been moved to the function declaration.
+
+2022-10-11 Tsukasa OI <research_trasio@irq.a4lg.com>
+
+ sim/m68hc11: Add ATTRIBUTE_PRINTF
+ Clang generates a warning if the format string of a printf-like function is
+ not a literal ("-Wformat-nonliteral"). On the default configuration, it
+ causes a build failure (unless "--disable-werror" is specified).
+
+ To avoid warnings on the printf-like wrapper, it requires proper
+ __attribute__((format)) and we have ATTRIBUTE_PRINTF macro for this reason.
+
+ This commit adds ATTRIBUTE_PRINTF to a printf-like function.
+
+2022-10-11 Tsukasa OI <research_trasio@irq.a4lg.com>
+
+ sim/m32c: Add ATTRIBUTE_PRINTF
+ Clang generates a warning if the format string of a printf-like function is
+ not a literal ("-Wformat-nonliteral"). On the default configuration, it
+ causes a build failure (unless "--disable-werror" is specified).
+
+ To avoid warnings on the printf-like wrapper, it requires proper
+ __attribute__((format)) and we have ATTRIBUTE_PRINTF macro for this reason.
+
+ This commit adds ATTRIBUTE_PRINTF to the printf-like functions.
+
+2022-10-11 Tsukasa OI <research_trasio@irq.a4lg.com>
+
+ sim/erc32: Add ATTRIBUTE_PRINTF
+ Clang generates a warning if the format string of a printf-like function is
+ not a literal ("-Wformat-nonliteral"). On the default configuration, it
+ causes a build failure (unless "--disable-werror" is specified).
+
+ To avoid warnings on the printf-like wrapper, it requires proper
+ __attribute__((format)) and we have ATTRIBUTE_PRINTF macro for this reason.
+
+ This commit adds ATTRIBUTE_PRINTF to the printf-like functions.
+
+2022-10-11 Tsukasa OI <research_trasio@irq.a4lg.com>
+
+ sim/cris: Add ATTRIBUTE_PRINTF
+ Clang generates a warning if the format string of a printf-like function is
+ not a literal ("-Wformat-nonliteral"). On the default configuration, it
+ causes a build failure (unless "--disable-werror" is specified).
+
+ To avoid warnings on the printf-like wrapper, it requires proper
+ __attribute__((format)) and we have ATTRIBUTE_PRINTF macro for this reason.
+
+ This commit adds ATTRIBUTE_PRINTF to a printf-like function.
+
+2022-10-11 Tsukasa OI <research_trasio@irq.a4lg.com>
+
+ sim/common: Add ATTRIBUTE_PRINTF
+ Clang generates a warning if the format string of a printf-like function is
+ not a literal ("-Wformat-nonliteral"). On the default configuration, it
+ causes a build failure (unless "--disable-werror" is specified).
+
+ To avoid warnings on the printf-like wrapper, it requires proper
+ __attribute__((format)) and we have ATTRIBUTE_PRINTF macro for this reason.
+
+ This commit adds ATTRIBUTE_PRINTF to a printf-like function.
+
+2022-10-11 Martin Liska <mliska@suse.cz>
+
+ fix compressed_debug_section_names definition for "zlib"
+ bfd/ChangeLog:
+
+ * libbfd.c: Set COMPRESS_DEBUG_GABI_ZLIB for "zlib" value.
+
+2022-10-11 Martin Liska <mliska@suse.cz>
+
+ add --enable-default-compressed-debug-sections-algorithm configure option
+ ChangeLog:
+
+ * configure.ac: Add --enable-default-compressed-debug-sections-algorithm.
+ * configure: Regenerate.
+
+ gas/ChangeLog:
+
+ * NEWS: Document the new option.
+ * as.c (flag_compress_debug): Set default algorithm based
+ on the configure option.
+ * configure.ac: Add --enable-default-compressed-debug-sections-algorithm.
+ * configure: Regenerate.
+ * config.in: Likewise.
+
+ ld/ChangeLog:
+
+ * NEWS: Document the new option.
+ * configure.ac: Add --enable-default-compressed-debug-sections-algorithm.
+ * configure: Regenerate.
+ * config.in: Likewise.
+ * ldmain.c: Set default algorithm based
+ on the configure option.
+
+2022-10-11 Martin Liska <mliska@suse.cz>
+
+ refactor usage of compressed_debug_section_type
+ bfd/ChangeLog:
+
+ * bfd-in.h (bfd_hash_set_default_size): Add COMPRESS_UNKNOWN
+ enum value.
+ (struct compressed_type_tuple): New.
+ * bfd-in2.h (bfd_hash_set_default_size): Regenerate.
+ (struct compressed_type_tuple): Likewise.
+ * libbfd.c (ARRAY_SIZE): New macro.
+ (bfd_get_compression_algorithm): New function.
+ (bfd_get_compression_algorithm_name): Likewise.
+
+ gas/ChangeLog:
+
+ * as.c: Do not special-case, use the new functions.
+
+ ld/ChangeLog:
+
+ * emultempl/elf.em: Do not special-case, use the new functions.
+ * lexsup.c (elf_static_list_options): Likewise.
+
+2022-10-11 Tsukasa OI <research_trasio@irq.a4lg.com>
+
+ sim/riscv: fix multiply instructions on simulator
+ After this commit:
+
+ commit 0938b032daa52129b4215d8e0eedb6c9804f5280
+ Date: Wed Feb 2 10:06:15 2022 +0900
+
+ RISC-V: Add 'Zmmul' extension in assembler.
+
+ some instructions in the RISC-V simulator stopped working as a new
+ instruction class 'INSN_CLASS_ZMMUL' was added, and some existing
+ instructions were moved into this class.
+
+ The simulator doesn't currently handle this instruction class, and so
+ the instructions will now cause an illegal instruction trap.
+
+ This commit adds support for INSN_CLASS_ZMMUL, and adds a test that
+ ensures the affected instructions can be executed by the simulator.
+
+ Reviewed-by: Palmer Dabbelt <palmer@rivosinc.com>
+ Reviewed-by: Andrew Burgess <aburgess@redhat.com>
+
+2022-10-11 Nick Clifton <nickc@redhat.com>
+
+ Error: attempt to get value of unresolved symbol `L0'
+ * symbols.c (S_GET_VALUE): If the unresolved symbol is the fake
+ label provide a more helpful error message to the user.
+
+2022-10-11 Tsukasa OI <research_trasio@irq.a4lg.com>
+
+ sim/moxie: add custom directory stamp rule
+ Because sim/moxie/moxie-gdb.dtb is neither a program nor a library, automake
+ does not generate dirstamp file ($builddir/sim/moxie/.dirstamp) for it.
+
+ When maintainer mode is enabled, it tries to rebuild sim/moxie/moxie-gdb.dtb
+ but fails because there's no rules for automake-generated dirstamp file
+ which moxie-gdb.dtb depends.
+
+ This commit adds its own rule for the directory stamp (modified copy of the
+ automake output) and adds the directory stamp file to DISTCLEANFILES to
+ mimic automake-generated behavior (although "make distclean" does not work
+ when maintainer mode is enabled).
+
+2022-10-11 Bruno Larsen <blarsen@redhat.com>
+
+ gdb/testsuite: Fix formatting of python script
+ The python black formatter was complaining about formatting on the
+ script gdb.python/pretty-print-call-by-hand.py. This commit changed
+ the offending lines to make the formatter happy.
+
+2022-10-11 Tom de Vries <tdevries@suse.de>
+
+ [gdb/testsuite] Fix prompt parsing in capture_command_output
+ I noticed in capture_command_output that the output of a single command is
+ matched using two gdb_test_multiples:
+ - the first one matching the echoed command and skipping an optional prefix,
+ - the second one matching the output and the prompt.
+
+ This is error-prone, because the first gdb_test_multiple has implicit
+ clauses which may consume the prompt.
+
+ The problem is easy to spot with an example. First consider:
+ ...
+ set output [capture_command_output "print 1" "\\\$1 = "]
+ gdb_assert { [string equal $output "1"] }
+ ...
+ for which we get:
+ ...
+ PASS: [string equal $output "1"]
+ ...
+
+ If we change the prefix string to a no-match, say "1 = ", and update the
+ output string match accordingly, we get instead:
+ ...
+ FAIL: capture_command_output for print 1
+ FAIL: [string equal $output "\$1 = 1"]
+ ...
+
+ The first FAIL is produced by the first gdb_test_multiple, consuming the prompt.
+
+ The second gdb_test_multiple then silently times out waiting for another prompt,
+ after which the second FAIL is produced. Note that the timeout is silent
+ because the gdb_test_multiple is called with an empty message argument.
+
+ The second FAIL is because capture_command_output returns "", given that all
+ the command output was consumed by the first gdb_test_multiple.
+
+ Fix this by rewriting capture_command_output to use only a single
+ gdb_test_multiple.
+
+ Tested on x86_64-linux.
+
+2022-10-11 Vladimir Mezentsev <vladimir.mezentsev@oracle.com>
+
+ gprofng: no need to build version.texi
+ gprofng/ChangeLog
+ 2022-10-10 Vladimir Mezentsev <vladimir.mezentsev@oracle.com>
+
+ PR gprofng/29465
+ PR gprofng/29667
+ * doc/Makefile.am: No need to build version.texi.
+ * doc/Makefile.in: Rebuild.
+
+2022-10-11 Vladimir Mezentsev <vladimir.mezentsev@oracle.com>
+
+ gprofng: use the --libdir path to find libraries
+ gprofng/ChangeLog
+ 2022-10-10 Vladimir Mezentsev <vladimir.mezentsev@oracle.com>
+
+ PR gprofng/29663
+ * src/Makefile.am: Add -DLIBDIR to CPPFLAGS.
+ * src/Makefile.in: Rebuild.
+ * src/envsets.cc (putenv_libcollector_ld_misc): Use LIBDIR to find
+ the gprofng libraries.
+
+2022-10-11 Vladimir Mezentsev <vladimir.mezentsev@oracle.com>
+
+ gprofng: run tests without installation
+ gprofng/ChangeLog
+ 2022-10-10 Vladimir Mezentsev <vladimir.mezentsev@oracle.com>
+
+ PR gprofng/29107
+ * testsuite/config/default.exp: Set up environment to run gprofng tests
+ without installation.
+ * testsuite/lib/Makefile.skel: Likewise.
+ * testsuite/lib/display-lib.exp: Likewise.
+
+2022-10-11 Simon Marchi <simon.marchi@polymtl.ca>
+
+ gdb/testsuite: fix race in gdb.base/async-shell.exp
+ I see some random failures in this test:
+
+ FAIL: gdb.base/async-shell.exp: run & (timeout)
+
+ It can be reliably reproduced on a recent enough GNU/Linux with this
+ change:
+
+ diff --git a/gdb/testsuite/lib/gdb.exp b/gdb/testsuite/lib/gdb.exp
+ index 44cc28b30051..2a3c8253ba5a 100644
+ --- a/gdb/testsuite/lib/gdb.exp
+ +++ b/gdb/testsuite/lib/gdb.exp
+ @@ -1301,6 +1301,7 @@ proc gdb_test_multiple { command message args } {
+ }
+ set gdb_test_name "$message"
+
+ + sleep 2
+ set result 0
+ set code [catch {gdb_expect $code} string]
+
+ "recent enough" means a system where libpthread.so was merged with
+ libc.so, so at least glibc 2.34.
+
+ The problem is that the `run &` command prints some things after the
+ prompt:
+
+ (gdb) [Thread debugging using libthread_db enabled]
+ Using host libthread_db library "/usr/lib/../lib/libthread_db.so.1".
+
+ If expect is quick enough, it will consume only up to the prompt. But
+ if it is slow enough, it will consume those messages at the same time as
+ the prompt, in which case the gdb_test used for "run &" won't match. By
+ default, the prompt used by gdb_test uses a `$` to anchor the match at
+ the end of the buffer. If there's anything following the prompt, it
+ won't match.
+
+ The diff above adds a delay between sending the command and consuming
+ the output, giving GDB more time to output the messages, giving a good
+ chance that expect consumes them at the same time as the prompt.
+
+ This is normally handled by using gdb_test_multiple and specifying a
+ pattern that ends with "$gdb_prompt", but not a trailing $. I think
+ this is common enough that it deserves its own gdb_test option.
+ Therefore, add the -no-anchor-prompt option to gdb_test, and
+ gdb_test_no_output for completeness. Use it in
+ gdb.base/async-shell.exp.
+
+ Change-Id: I9051d8800d1c10a2e95db1a575991f7723492f1b
+ Approved-By: Tom de Vries <tdevries@suse.de>
+
+2022-10-11 GDB Administrator <gdbadmin@sourceware.org>
+
+ Automatic date update in version.in
+
+2022-10-10 Tom Tromey <tom@tromey.com>
+
+ Fix a latent bug in print_wchar
+ print_wchar keeps track of when escape sequences are emitted, to force
+ an escape sequence if needed by a subsequent character. For example
+ for the string concatenation "\0" "1", gdb will print "\000\061" --
+ because printing "\0001" might be confusing.
+
+ However, this code has two errors. First, this logic is not needed
+ for octal escapes, because there is a length limit of 3 for octal
+ escapes, and gdb always prints these with "%.3o". Second, though,
+ this *is* needed for hex escapes, because those do not have a length
+ limit.
+
+ This patch fixes these problems and adds the appropriate tests.
+
+2022-10-10 Tom Tromey <tom@tromey.com>
+
+ Don't use wchar_printable in print_wchar
+ print_wchar uses wchar_printable, but this isn't needed -- all the
+ relevant cases are already handled by the 'switch'. This changes the
+ code to use gdb_iswprint, and removes a somewhat confusing comment
+ related to this code.
+
+ Remove c_printstr
+ This renames c_printstr, removing a layer of indirection.
+
+ Remove c_emit_char
+ This renames c_emit_char, removing a layer of indirection.
+
+ Boolify need_escape in generic_emit_char
+ This changes 'need_escape' in generic_emit_char to be of type bool,
+ rather than int.
+
+2022-10-10 Tom Tromey <tom@tromey.com>
+ Andrew Burgess <aburgess@redhat.com>
+
+ Fix latent quote char bug in generic_printstr
+ generic_printstr prints an empty string like:
+
+ fputs_filtered ("\"\"", stream);
+
+ However, this seems wrong to me if the quote character is something
+ other than double quote. This patch fixes this latent bug. Thanks to
+ Andrew for the test case.
+
+2022-10-10 Tom Tromey <tromey@adacore.com>
+
+ Fix the guile build
+ The frame_info_ptr patches broke the build with Guile. This patch
+ fixes the problem. In mos cases I chose to preserve the use of
+ frame_info_ptr, at least where I could be sure that the object
+ lifetime did not interact with Guile's longjmp-based exception scheme.
+
+ Tested on x86-64 Fedora 34.
+
+2022-10-10 Tom de Vries <tdevries@suse.de>
+
+ [gdb/testsuite] Detect trailing ^C/^D in command
+ Detect a trailing ^C/^D in the command argument of gdb_test_multiple, and
+ error out.
+
+ Tested on x86_64-linux.
+
+2022-10-10 Tom de Vries <tdevries@suse.de>
+
+ [gdb/testsuite] Fix error message for cmd with trailing newline
+ I noticed that the error message in gdb_test_multiple about trailing newline
+ in a command does not mention the offending command, nor the word command:
+ ...
+ if [string match "*\[\r\n\]" $command] {
+ error "Invalid trailing newline in \"$message\" test"
+ }
+ ...
+
+ Fix this by using instead:
+ ...
+ error "Invalid trailing newline in \"$command\" command"
+ ...
+
+ Also add a test-case to trigger this: gdb.testsuite/gdb-test.exp.
+
+ Tested on x86_64-linux.
+
+2022-10-10 Andrew Burgess <aburgess@redhat.com>
+
+ gdb: include the base address in in-memory bfd filenames
+ The struct target_buffer (in gdb_bfd.c) is used to hold information
+ about an in-memory BFD object created by GDB. For now this mechanism
+ is used by GDB when loading information about JIT symfiles.
+
+ This commit updates target_buffer (in gdb_bfd.c) to be more C++ like,
+ and, at the same time, adds the base address of the symfile into the
+ BFD filename.
+
+ Right now, every in-memory BFD is given the filename "<in-memory>".
+ This filename is visible in things like 'maint info symtabs' and
+ 'maint info line-table'. If there are multiple in-memory BFD objects
+ then it can be hard to match keep track if which BFD is which. This
+ commit changes the name to be "<in-memory@ADDRESS>" where ADDRESS is
+ replaced with the base address for where the in-memory symbol file was
+ read from.
+
+ As an example of how this is useful, here's the output of 'maint info
+ jit' showing a single loaded JIT symfile:
+
+ (gdb) maintenance info jit
+ jit_code_entry address symfile address symfile size
+ 0x00000000004056b0 0x0000000007000000 17320
+
+ And here's part of the output from 'maint info symtabs':
+
+ (gdb) maintenance info symtabs
+ ...snip...
+ { objfile <in-memory@0x7000000> ((struct objfile *) 0x5258250)
+ { ((struct compunit_symtab *) 0x4f0afb0)
+ debugformat DWARF 4
+ producer GNU C17 9.3.1 20200408 (Red Hat 9.3.1-2) -mtune=generic -march=x86-64 -g -fno-stack-protector -fpic
+ name jit-elf-solib.c
+ dirname /tmp/binutils-gdb/build/gdb/testsuite
+ blockvector ((struct blockvector *) 0x5477850)
+ user ((struct compunit_symtab *) (null))
+ { symtab /tmp/binutils-gdb/build/gdb/testsuite/../../../src/gdb/testsuite/gdb.base/jit-elf-solib.c ((struct symtab *) 0x4f0b030)
+ fullname (null)
+ linetable ((struct linetable *) 0x5477880)
+ }
+ }
+ }
+
+ I've added a new test that checks the new in-memory file names are
+ generated correctly, and also checks that the in-memory JIT files can
+ be dumped back out using 'dump binary memory'.
+
+2022-10-10 Andrew Burgess <aburgess@redhat.com>
+
+ gdb: remove filename arg from gdb_bfd_open_from_target_memory
+ The filename argument to gdb_bfd_open_from_target_memory was never
+ used; this argument had a default value of nullptr, and the only call
+ to this function, in jit.c, relied on the default value.
+
+ In the next commit I'm going to make some changes to the
+ gdb_bfd_open_from_target_memory function, and, though I could take
+ account of a filename parameter, it seems pointless to maintain an
+ unused argument.
+
+ This commit removes the filename argument.
+
+ There should be no user visible changes after this commit.
+
+2022-10-10 Andrew Burgess <aburgess@redhat.com>
+
+ gdb: add infcall specific debugging
+ Add two new commands:
+
+ set debug infcall on|off
+ show debug infcall
+
+ These enable some new debugging related to when GDB makes inferior
+ function calls. I've added some basic debugging for what I think are
+ the major steps in the inferior function call process, but I'm sure we
+ might want to add more later.
+
+2022-10-10 Andrew Burgess <aburgess@redhat.com>
+
+ gdb: extra debug output in thread.c
+ Add some extra 'threads' debug in a couple of places in thread.c.
+ I've also added an additional gdb_assert in one case.
+
+ gdb: improve infrun_debug_show_threads output
+ This commit switches to use INFRUN_SCOPED_DEBUG_START_END in the
+ infrun_debug_show_threads function, which means the output will get an
+ extra level of indentation, this looks a little nicer I think.
+
+2022-10-10 Nick Clifton <nickc@redhat.com>
+
+ Add ability to create reproducible source tarballs.
+ * src-release.sh: Add "-r <date>" option to create reproducible
+ tarballs based upon a fixed timestamp of <date>.
+ * binutils/README-how-to-make-a-release: Add a line showing how to
+ use -r <date> when creating a binutils release.
+
+2022-10-10 Bruno Larsen <blarsen@redhat.com>
+
+ gdb/frame: Add reinflation method for frame_info_ptr
+ Currently, despite having a smart pointer for frame_infos, GDB may
+ attempt to use an invalidated frame_info_ptr, which would cause internal
+ errors to happen. One such example has been documented as PR
+ python/28856, that happened when printing frame arguments calls an
+ inferior function.
+
+ To avoid failures, the smart wrapper was changed to also cache the frame
+ id, so the pointer can be reinflated later. For this to work, the
+ frame-id stuff had to be moved to their own .h file, which is included
+ by frame-info.h.
+
+ Frame_id caching is done explicitly using the prepare_reinflate method.
+ Caching is done manually so that only the pointers that need to be saved
+ will be, and reinflating has to be done manually using the reinflate
+ method because the get method and the -> operator must not change
+ the internals of the class. Finally, attempting to reinflate when the
+ pointer is being invalidated causes the following assertion errors:
+
+ check_ptrace_stopped_lwp_gone: assertion `lp->stopped` failed.
+ get_frame_pc: Assertion `frame->next != NULL` failed.
+
+ As for performance concerns, my personal testing with `time make
+ chec-perf GDB_PERFTEST_MODE=run` showed an actual reduction of around
+ 10% of time running.
+
+ This commit also adds a testcase that exercises the python/28856 bug with
+ 7 different triggers, run, continue, step, backtrace, finish, up and down.
+ Some of them can seem to be testing the same thing twice, but since this
+ test relies on stale pointers, there is always a chance that GDB got lucky
+ when testing, so better to test extra.
+
+ Regression tested on x86_64, using both gcc and clang.
+
+ Approved-by: Tom Tomey <tom@tromey.com>
+
+2022-10-10 Tom Tromey <tom@tromey.com>
+
+ Change GDB to use frame_info_ptr
+ This changes GDB to use frame_info_ptr instead of frame_info *
+ The substitution was done with multiple sequential `sed` commands:
+
+ sed 's/^struct frame_info;/class frame_info_ptr;/'
+ sed 's/struct frame_info \*/frame_info_ptr /g' - which left some
+ issues in a few files, that were manually fixed.
+ sed 's/\<frame_info \*/frame_info_ptr /g'
+ sed 's/frame_info_ptr $/frame_info_ptr/g' - used to remove whitespace
+ problems.
+
+ The changed files were then manually checked and some 'sed' changes
+ undone, some constructors and some gets were added, according to what
+ made sense, and what Tromey originally did
+
+ Co-Authored-By: Bruno Larsen <blarsen@redhat.com>
+ Approved-by: Tom Tomey <tom@tromey.com>
+
+2022-10-10 Tom Tromey <tom@tromey.com>
+
+ Introduce frame_info_ptr smart pointer class
+ This adds frame_info_ptr, a smart pointer class. Every instance of
+ the class is kept on an intrusive list. When reinit_frame_cache is
+ called, the list is traversed and all the pointers are invalidated.
+ This should help catch the typical GDB bug of keeping a frame_info
+ pointer alive where a frame ID was needed instead.
+
+ Co-Authored-By: Bruno Larsen <blarsen@redhat.com>
+ Approved-by: Tom Tomey <tom@tromey.com>
+
+2022-10-10 Tom Tromey <tom@tromey.com>
+
+ Remove frame_id_eq
+ This replaces frame_id_eq with operator== and operator!=. I wrote
+ this for a version of this series that I later abandoned; but since it
+ simplifies the code, I left this patch in.
+
+ Approved-by: Tom Tomey <tom@tromey.com>
+
+2022-10-10 Andrew Burgess <aburgess@redhat.com>
+
+ gdb/testsuite: use 'end' at the end of python blocks
+ Within the testsuite, use the keyword 'end' to terminate blocks of
+ Python code being sent to GDB, rather than sending \004. I could only
+ find three instances of this, all in tests that I originally wrote. I
+ have no memory of there being any special reason why I used \004
+ instead of 'end' - I assume I copied this from somewhere else that has
+ since changed.
+
+ Non of the tests being changed here are specifically about whether
+ \004 can be used to terminate a Python block, so I think switching to
+ the more standard 'end' keyword is the right choice.
+
+2022-10-10 Simon Marchi <simon.marchi@polymtl.ca>
+
+ gdbsupport: re-generate configure
+ I get this diff when re-generating configure, probably leftover from
+ 67d1991b785 ("egrep in binutils").
+
+ Change-Id: I759c88c2bad648736d33ff98089db45c9b686356
+
+2022-10-10 Alan Modra <amodra@gmail.com>
+
+ Merge configure.ac from gcc project
+ To merge with gcc's copy of configure.ac we need to revert changes to
+ configure.ac in the following gcc commits:
+ dc832fb39fc0 2022-08-25
+ fc259b522c0f 2022-06-25
+ Then reapply configure.ac changes in binutils from these binutils
+ commits:
+ 50ad1254d503 2021-01-09
+ bb368aad297f 2022-03-11
+ e5f2f7d901ee 2022-07-26
+ 2cac01e3ffff 2022-09-26
+ Plus copy over gcc's config/ax_cxx_compile_stdcxx.m4, then regenerate
+ configure.
+
+2022-10-10 GDB Administrator <gdbadmin@sourceware.org>
+
+ Automatic date update in version.in
+
+2022-10-09 GDB Administrator <gdbadmin@sourceware.org>
+
+ Automatic date update in version.in
+
+2022-10-08 Tom Tromey <tom@tromey.com>
+
+ Merge both implementations of debug_names::insert
+ The class debug_names has two 'insert' overloads, but only one of them
+ is ever called externally, and it simply forwards to the other
+ implementation. It seems cleaner to me to have a single method, so
+ this patch merges the two.
+
+2022-10-08 Tom de Vries <tdevries@suse.de>
+
+ [gdb/testsuite] Fix silent fail in gdb.server/connect-with-no-symbol-file.exp
+ With native and target boards native-gdbserver, remote-gdbserver-on-localhost and
+ remote-stdio-gdbserver I have for gdb.server/connect-with-no-symbol-file.exp:
+ ...
+ # of expected passes 8
+ ...
+ but with native-extended-gdbserver I have instead:
+ ...
+ # of expected passes 8
+ # of unexpected failures 4
+ ...
+
+ The extra FAILs are of the form:
+ ...
+ (gdb) detach^M
+ Detaching from pid process 28985^M
+ [Inferior 1 (process 28985) detached]^M
+ (gdb) FAIL: gdb.server/connect-with-no-symbol-file.exp: sysroot=: \
+ action=permission: connection to GDBserver succeeded
+ ...
+ and are due to the fact that the actual gdb output doesn't match the regexp:
+ ...
+ gdb_test "detach" \
+ ".*Detaching from program: , process.*Ending remote debugging.*" \
+ "connection to GDBserver succeeded"
+ ...
+
+ With native, the actual gdb output is:
+ ...
+ (gdb) detach^M
+ Detaching from pid process 29657^M
+ Ending remote debugging.^M
+ [Inferior 1 (process 29657) detached]^M
+ (gdb) Remote debugging from host ::1, port 51028^M
+ ...
+ and because the regexp doesn't match, it triggers an implicit clause for
+ "Ending remote debugging" in gdb_test_multiple, which has the consequence
+ that the FAIL is silent.
+
+ Fix:
+ - the regexp by making it less strict
+ - the silent fail by rewriting into a gdb_test_multiple, and adding an
+ explicit fail clause.
+
+ Tested on x86_64-linux, using native and aforementioned target boards.
+
+2022-10-08 GDB Administrator <gdbadmin@sourceware.org>
+
+ Automatic date update in version.in
+
+2022-10-07 Lancelot SIX <lancelot.six@amd.com>
+
+ gdb/testsuite: fix gdb.threads/linux-dp.exp regex
+ On ubuntu 22.04 with the libc6-dbg package installed, I have the
+ following failure:
+
+ where
+ #0 print_philosopher (n=3, left=33 '!', right=33 '!') at .../gdb/testsuite/gdb.threads/linux-dp.c:105
+ #1 0x000055555555576a in philosopher (data=0x55555555937c) at .../gdb/testsuite/gdb.threads/linux-dp.c:148
+ #2 0x00007ffff7e11b43 in start_thread (arg=<optimized out>) at ./nptl/pthread_create.c:442
+ #3 0x00007ffff7ea3a00 in clone3 () at ../sysdeps/unix/sysv/linux/x86_64/clone3.S:81
+ (gdb) FAIL: gdb.threads/linux-dp.exp: first thread-specific breakpoint hit
+
+ The regex for this test accounts for different situations (with /
+ without debug symbol) but assumes that if debug info is present the
+ backtrace shows execution under pthread_create. However, for the
+ implementation under test, we are under start_thread.
+
+ Update the regex to accept start_thread.
+
+ Tested on Ubuntu-22.04 x86_64 with and without libc6-dbg debug symbols
+ available.
+
+ Change-Id: I1e1536279890bca2cd07f038e026b41e46af44e0
+
+2022-10-07 Tom de Vries <tdevries@suse.de>
+
+ [gdb/testsuite] Handle host cleanfiles
+ When running test-case gdb.server/abspath.exp with host board
+ local-remote-host-notty, I get:
+ ...
+ $ git sti
+ ...
+ deleted: gdb/testsuite/gdb.xml/trivial.xml
+ ...
+
+ This happens as follows. The test-case calls skip_gdbserver_test, which calls
+ gdb_skip_xml_test, which does:
+ ...
+ set xml_file [gdb_remote_download host "${srcdir}/gdb.xml/trivial.xml"]
+ ...
+
+ Then proc gdb_remote_download appends $xml_file (which for this particular
+ host board happens to be ${srcdir}/gdb.xml/trivial.xml) to cleanfiles, which
+ ends up being handled in gdb_finish by:
+ ...
+ eval remote_file target delete $cleanfiles
+ ...
+
+ The problem is that a host file is deleted using target delete.
+
+ Fix this by splitting cleanfiles up in cleanfiles_target and cleanfiles_host.
+
+ Tested on x86_64-linux.
+
+2022-10-07 Tom de Vries <tdevries@suse.de>
+
+ [gdb/testsuite] Remove unnecessary warning in gdb.base/default.exp
+ When running test-case gdb.base/default.exp with target board
+ native-gdbserver, we get:
+ ...
+ WARNING: Skipping backtrace and break tests because of GDB stub.
+ ...
+
+ There's no need for such a warning, so remove it.
+
+ Tested on x86_64-linux with native and target board native-gdbserver.
+
+2022-10-07 Tom de Vries <tdevries@suse.de>
+
+ [gdb/testsuite] Fix have_mpx with remote-gdbserver-on-localhost
+ With target board remote-gdbserver-on-localhost and gdb.arch/i386-mpx-call.exp
+ I run into:
+ ...
+ FAIL: gdb.arch/i386-mpx-call.exp: upper_bnd0: continue to a bnd violation
+ ...
+
+ This is due to the have_mpx test which should return 0, but instead returns 1
+ because the captured output:
+ ...
+ No MPX support
+ No MPX support
+ ...
+ does not match the used regexp:
+ ...
+ set status [expr ($status == 0) \
+ && ![regexp "^No MPX support\r\n" $output]]
+ ...
+ which does match the captured output with native:
+ ...
+ No MPX support^M
+ No MPX support^M
+ ...
+
+ Fix this by making the \r in the regexp optional.
+
+ Tested on x86_64-linux, with native and target board
+ remote-gdbserver-on-localhost.
+
+2022-10-07 Tom de Vries <tdevries@suse.de>
+
+ [gdb/testsuite] Fix DUPLICATEs with remote-gdbserver-on-localhost
+ Fix some DUPLICATEs that we run into with target board
+ remote-gdbserver-on-localhost, by using test_with_prefix.
+
+ Tested on x86_64-linux, with native and target board
+ remote-gdbserver-on-localhost.
+
+2022-10-07 Tom de Vries <tdevries@suse.de>
+
+ [gdb/testsuite] Fix path in test name in gdb_load_shlib
+ When running test-case gdb.server/solib-list.exp with target board
+ remote-gdbserver-on-localhost, I run into:
+ ...
+ (gdb) set solib-search-path $outputs/gdb.server/solib-list^M
+ (gdb) PASS: gdb.server/solib-list.exp: non-stop 0: \
+ set solib-search-path $outputs/gdb.server/solib-list
+ PATH: gdb.server/solib-list.exp: non-stop 0: \
+ set solib-search-path $outputs/gdb.server/solib-list
+ ...
+
+ This is due to this code in gdb_load_shlib:
+ ...
+ gdb_test "set solib-search-path [file dirname $file]" "" ""
+ ...
+
+ Fix this by setting an explicit test name.
+
+ Tested on x86_64-linux, with native and target boards
+ remote-gdbserver-on-localhost, native-gdbserver and native-extended-gdbserver.
+
+2022-10-07 Alan Modra <amodra@gmail.com>
+
+ PR29653, objcopy/strip: fuzzed small input file induces large output file
+ _bfd_check_format functions should not print errors or warnings if
+ they return NULL. A NULL return means the particular target under
+ test does not match, so there isn't any reason to make a complaint
+ about the target. In fact there isn't a good reason to warn even if
+ the target matches, except via the _bfd_per_xvec_warn mechanism; Some
+ other target might be a better match.
+
+ This patch tidies pe_bfd_object_p with the above in mind, and
+ restricts the PE optional header SectionAlignment and FileAlignment
+ fields somewhat. I chose to warn on nonsense values rather than
+ refusing to match. Refusing to match would be OK too.
+
+ PR 29653
+ * peXXigen.c (_bfd_XXi_swap_aouthdr_in): Don't emit error about
+ invalid NumberOfRvaAndSizes here. Limit loop copying data
+ directory to IMAGE_NUMBEROF_DIRECTORY_ENTRIES.
+ * peicode.h (pe_bfd_object_p): Don't clear and test bfd_error
+ around bfd_coff_swap_aouthdr_in. Warn on invalid SectionAlignment,
+ FileAlignment and NumberOfRvaAndSizes. Don't return NULL on
+ invalid NumberOfRvaAndSizes.
+
+2022-10-07 GDB Administrator <gdbadmin@sourceware.org>
+
+ Automatic date update in version.in
+
+2022-10-06 Tom Tromey <tromey@adacore.com>
+
+ Fix indentation in riscv-tdep.c
+ This just fixes some indentation in riscv-tdep.c.
+
+2022-10-06 Torbjörn SVENSSON <torbjorn.svensson@foss.st.com>
+
+ gdb/arm: Handle lazy FPU state preservation
+ Read LSPEN, ASPEN and LSPACT bits from FPCCR and use them together
+ with FPCAR to identify if lazy FPU state preservation is active for
+ the current frame. See "Lazy context save of FP state", in B1.5.7,
+ also ARM AN298, supported by Cortex-M4F architecture for details on
+ lazy FPU register stacking. The same conditions are valid for other
+ Cortex-M cores with FPU.
+
+ This patch has been verified on a STM32F4-Discovery board by:
+ a) writing a non-zero value (lets use 0x1122334455667788 as an
+ example) to all the D-registers in the main function
+ b) configured the SysTick to fire
+ c) in the SysTick_Handler, write some other value (lets use
+ 0x0022446688aaccee as an example) to one of the D-registers (D0 as
+ an example) and then do "SVC #0"
+ d) in the SVC_Handler, write some other value (lets use
+ 0x0099aabbccddeeff) to one of the D-registers (D0 as an example)
+
+ In GDB, suspend the execution in the SVC_Handler function and compare
+ the value of the D-registers for the SVC_handler frame and the
+ SysTick_Handler frame. With the patch, the value of the modified
+ D-register (D0) should be the new value (0x009..eff) on the
+ SVC_Handler frame, and the intermediate value (0x002..cee) for the
+ SysTick_Handler frame. Now compare the D-register value for the
+ SysTick_Handler frame and the main frame. The main frame should
+ have the initial value (0x112..788).
+
+2022-10-06 Tom de Vries <tdevries@suse.de>
+
+ [gdb/symtab] Factor out have_complaint
+ After committing 8ba677d3560 ("[gdb/symtab] Don't complain about function
+ decls") I noticed that quite a bit of code in read_func_scope is used to decide
+ whether to issue the "cannot get low and high bounds for subprogram DIE at
+ $hex" complaint, which executes unnecessarily if we have the default
+ "set complaints 0".
+
+ Fix this by (NFC):
+ - factoring out new static function have_complaint from macro complaint, and
+ - using it to wrap the relevant code in read_func_scope.
+
+ Tested on x86_64-linux.
+
+2022-10-06 Andrew Burgess <aburgess@redhat.com>
+
+ gdb: add missing nullptr checks in bpstat_check_breakpoint_conditions
+ Add a couple of missing nullptr checks in the function
+ bpstat_check_breakpoint_conditions.
+
+ No user visible change after this commit.
+
+2022-10-06 Andrew Burgess <aburgess@redhat.com>
+
+ gdb: more infrun debug from breakpoint.c
+ This commit adds additional infrun debug from the breakpoint.c file.
+ The new debug output all relates to breakpoint condition evaluation.
+
+ There is already some infrun debug emitted from the breakpoint.c file,
+ so hopefully, adding more will not be contentious. I think the
+ functions being instrumented make sense as part of the infrun process,
+ the inferior stops, evaluates the condition, and then either stops or
+ continues. This new debug gives more insight into that process.
+
+ I had to make the bp_location* argument to find_loc_num_by_location
+ const, and add a declaration for find_loc_num_by_location.
+
+ There should be no user visible changes unless they turn on debug
+ output.
+
+2022-10-06 Andrew Burgess <aburgess@redhat.com>
+
+ gdb: add some additional debug in mark_async_event_handler
+ Extend the existing debug printf call to include the previous state of
+ the async_event_handler object.
+
+2022-10-06 Tsukasa OI <research_trasio@irq.a4lg.com>
+
+ RISC-V: Print XTheadMemPair literal as "immediate"
+ The operand type "Xl(...)" denotes that (...) is a literal. Specifically,
+ they are intended to be a constant immediate value.
+
+ This commit prints "Xl(...)" operand with dis_style_immediate style,
+ not dis_style_text.
+
+ opcodes/ChangeLog:
+
+ * riscv-dis.c (print_insn_args): Use dis_style_immediate on
+ the constant literal of the "Xl..." operand.
+
+2022-10-06 Tsukasa OI <research_trasio@irq.a4lg.com>
+
+ RISC-V: Fix T-Head immediate types on printing
+ This commit fixes two minor typing-related issues for
+ T-Head immediate operands.
+
+ 1. A signed type must be specified when printing with %i.
+ 2. unsigned/signed int is not portable enough for max 32-bit immediates.
+ Instead, we should use unsigned/signed long.
+ The format string is changed accordingly.
+
+ opcodes/ChangeLog:
+
+ * riscv-dis.c (print_insn_args): Fix T-Head immediate types on
+ printing.
+
+2022-10-06 Tsukasa OI <research_trasio@irq.a4lg.com>
+
+ RISC-V: Print comma and tabs as the "text" style
+ On the RISC-V disassembler, some separators have non-text style when
+ printed with another word with another style.
+
+ This commit splits those, making sure that those comma and tabs are printed
+ with the "text" style.
+
+ opcodes/ChangeLog:
+
+ * riscv-dis.c (print_insn_args): Split and print the comma as
+ text. (riscv_disassemble_insn): Split and print tabs as text.
+ (riscv_disassemble_data): Likewise.
+
+2022-10-06 Tsukasa OI <research_trasio@irq.a4lg.com>
+
+ RISC-V: Optimize riscv_disassemble_data printf
+ This commit makes types of printf arguments on riscv_disassemble_data
+ as small as possible (as long as we can preserve the portability) to reduce
+ the cost of printf (especially on 32-bit host).
+
+ opcodes/ChangeLog:
+
+ * riscv-dis.c (riscv_disassemble_data): Use smallest possible type
+ to printing data.
+
+2022-10-06 Tsukasa OI <research_trasio@irq.a4lg.com>
+
+ RISC-V: Fix printf argument types corresponding %x
+ "%x" format specifier requires unsigned type, not int. This commit
+ fixes this issue on the RISC-V disassembler.
+
+ opcodes/ChangeLog:
+
+ * riscv-dis.c (print_insn_args): Fix printf argument types where
+ the format specifier is "%x".
+
+2022-10-06 Tsukasa OI <research_trasio@irq.a4lg.com>
+
+ RISC-V: Fix immediates to have "immediate" style
+ This commit fixes certain print calls on immediate operands to have
+ dis_style_immediate.
+
+ opcodes/ChangeLog:
+
+ * riscv-dis.c (print_insn_args): Fix immediates to have
+ "immediate" style. (riscv_disassemble_data): Likewise.
+
+2022-10-06 GDB Administrator <gdbadmin@sourceware.org>
+
+ Automatic date update in version.in
+
+2022-10-06 Alan Modra <amodra@gmail.com>
+
+ Re: bfd BLD-POTFILES.in dependencies
+ Removing $BLD_POTFILES from BFD-POTFILES.in was correct, but left a
+ hole in dependencies.
+ make[4]: Entering directory '/home/alan/build/gas/all/bfd/po'
+ make[4]: *** No rule to make target '../elf32-aarch64.c', needed by '/home/alan/src/binutils-gdb/bfd/po/bfd.pot'. Stop.
+
+ * Makefile.am (BUILT_SOURCES): Add BUILD_CFILES.
+ * Makefile.in: Regenerate.
+
+2022-10-05 Jan Beulich <jbeulich@suse.com>
+
+ x86/gas: support quoted address scale factor in AT&T syntax
+ An earlier attempt (e68c3d59acd0 ["x86: better respect quotes in
+ parse_operands()"]) needed undoing (cc0f96357e0b ["x86: permit
+ parenthesized expressions again as addressing scale factor"]) as far its
+ effect here went. As indicated back then, the issue is the backwards
+ scanning of the operand string to find the matching opening parenthesis.
+ Switch to forward scanning, finding the last outermost unquoted opening
+ parenthesis (which is the one matching the trailing closing one).
+
+ Arm64: support CLEARBHB alias
+ While the Arm v8 ARM (rev I-a) still doesn't mention this alias, it is
+ (typically via a macro) already in use in kernels and alike.
+
+2022-10-05 Alan Modra <amodra@gmail.com>
+
+ PR29647, objdump -S looping
+ Fuzzed input with this in .debug_line
+ [0x0000003b] Special opcode 115: advance Address by 8 to 0x401180 and Line by -2 to -1
+
+ PR 29647
+ * objdump.c (print_line): Don't decrement line number here..
+ (dump_lines): ..do so here instead, ensuring loop terminates.
+
+2022-10-05 Alan Modra <amodra@gmail.com>
+
+ Re: stab nearest_line bfd_malloc_and_get_section
+ It didn't take long for the fuzzers to avoid size checks in
+ bfd_malloc_and_get_section. Plug this hole.
+
+ * syms.c (_bfd_stab_section_find_nearest_line): Ignore fuzzed
+ sections with no contents.
+
+2022-10-05 Vladimir Mezentsev <vladimir.mezentsev@oracle.com>
+
+ gprofng: fix build with --enable-pgo-build=lto
+ gprofng/ChangeLog
+ 2022-10-04 Vladimir Mezentsev <vladimir.mezentsev@oracle.com>
+
+ PR gprofng/29579
+ * libcollector/dispatcher.c: Fix the symbol version in SYMVER_ATTRIBUTE.
+ * libcollector/iotrace.c: Likewise.
+ * libcollector/linetrace.c: Likewise.
+ * libcollector/mmaptrace.c: Likewise.
+ * libcollector/synctrace.c: Likewise.
+
+2022-10-05 GDB Administrator <gdbadmin@sourceware.org>
+
+ Automatic date update in version.in
+
+2022-10-04 Tom Tromey <tom@tromey.com>
+
+ Remove decode_location_spec_default
+ This removes decode_location_spec_default, inlining it into its sole
+ caller.
+
+ Regression tested on x86-64 Fedora 34.
+
+2022-10-04 Palmer Dabbelt <palmer@rivosinc.com>
+
+ gas: NEWS: Mention the T-Head extensions that were recently added
+
+2022-10-04 Tom de Vries <tdevries@suse.de>
+
+ [gdb/symtab] Don't complain about function decls
+ [ Requires "[gdb/symtab] Don't complain about inlined functions" as
+ submitted here (
+ https://sourceware.org/pipermail/gdb-patches/2022-September/191762.html ). ]
+
+ With the test-case included in this patch, we get:
+ ...
+ (gdb) ptype main^M
+ During symbol reading: cannot get low and high bounds for subprogram DIE \
+ at 0xc1^M
+ type = int (void)^M
+ (gdb) FAIL: gdb.dwarf2/anon-ns-fn.exp: ptype main without complaints
+ ...
+
+ The DIE causing the complaint is a function declaration:
+ ...
+ <2><c1>: Abbrev Number: 3 (DW_TAG_subprogram)
+ <c2> DW_AT_name : foo
+ <c8> DW_AT_declaration : 1
+ ...
+ which is referred to from the DIE representing the function definition:
+ ...
+ <1><f4>: Abbrev Number: 7 (DW_TAG_subprogram)
+ <f5> DW_AT_specification: <0xc1>
+ <f9> DW_AT_low_pc : 0x4004c7
+ <101> DW_AT_high_pc : 0x7
+ ...
+ which does contain the low and high bounds.
+
+ Fix this by not complaining about function declarations.
+
+ Tested on x86_64-linux.
+
+2022-10-04 Tom de Vries <tdevries@suse.de>
+
+ [gdb/symtab] Don't complain about inlined functions
+ With the test-case included in this patch, we get:
+ ...
+ (gdb) ptype main^M
+ During symbol reading: cannot get low and high bounds for subprogram DIE \
+ at 0x113^M
+ During symbol reading: cannot get low and high bounds for subprogram DIE \
+ at 0x11f^M
+ type = int (void)^M
+ (gdb) FAIL: gdb.dwarf2/inline.exp: ptype main
+ ...
+
+ The complaints are about foo, with DW_AT_inline == DW_INL_inlined:
+ ...
+ <1><11f>: Abbrev Number: 6 (DW_TAG_subprogram)
+ <120> DW_AT_name : foo
+ <126> DW_AT_prototyped : 1
+ <126> DW_AT_type : <0x10c>
+ <12a> DW_AT_inline : 1 (inlined)
+ ...
+ and foo2, with DW_AT_inline == DW_INL_declared_inlined:
+ ...
+ <1><113>: Abbrev Number: 5 (DW_TAG_subprogram)
+ <114> DW_AT_name : foo2
+ <11a> DW_AT_prototyped : 1
+ <11a> DW_AT_type : <0x10c>
+ <11e> DW_AT_inline : 3 (declared as inline and inlined)
+ ...
+
+ Fix this by not complaining about inlined functions.
+
+ Tested on x86_64-linux.
+
+2022-10-04 Tsukasa OI <research_trasio@irq.a4lg.com>
+
+ gdb/riscv: Partial support for instructions up to 176-bit
+ Because riscv_insn_length started to support instructions up to 176-bit,
+ we need to increase buf size to 176-bit in size.
+
+ Also, that would break an assumption in riscv_insn::decode so this commit
+ fixes it, noting that instructions longer than 64-bit are not fully
+ supported yet.
+
+2022-10-04 Tsukasa OI <research_trasio@irq.a4lg.com>
+
+ RISC-V: Fix buffer overflow on print_insn_riscv
+ Because riscv_insn_length started to support instructions up to 176-bit,
+ we need to increase packet buffer size to 176-bit in size.
+
+ include/ChangeLog:
+
+ * opcode/riscv.h (RISCV_MAX_INSN_LEN): Max instruction length for
+ use in buffer size.
+
+ opcodes/ChangeLog:
+
+ * riscv-dis.c (print_insn_riscv): Increase buffer size for max
+ 176-bit length instructions.
+
+2022-10-04 Nelson Chu <nelson@rivosinc.com>
+
+ RISC-V: Renamed INSN_CLASS for floating point in integer extensions.
+ Just added suffix _INX for those INSN_CLASS should be enough to represent
+ their fpr can be replaced by gpr.
+
+2022-10-04 Nick Clifton <nickc@redhat.com>
+
+ Note that at least dejagnu version 1.5.3 is required in order to be ale to run the testsuites.
+ * README-maintainer-mode: Add a minimum version of dejagnu
+ requirement.
+
+2022-10-04 Andrew Burgess <aburgess@redhat.com>
+
+ opcodes/riscv: style csr names as registers
+ While reviewing another patch I noticed that RISC-V CSR names are
+ given the text style, not the register style. This patch fixes this
+ mistake.
+
+2022-10-04 Luis Machado <luis.machado@arm.com>
+
+ [AArch64] Update FPSR/FPCR fields for FPU and SVE
+ I noticed some missing flags/fields from FPSR and FPCR registers in
+ both the FPU and SVE target descriptions.
+
+ This patch adds those and makes the SVE versions of FPSR and FPCR
+ use the proper flags/bitfields types.
+
+2022-10-04 Alan Modra <amodra@gmail.com>
+
+ Support objcopy changing compression to or from zstd
+ Commit 2cac01e3ffff lacked support for objcopy changing compression
+ style. Add that support, which meant a rewrite of
+ bfd_compress_section_contents. In the process I've fixed some memory
+ leaks.
+
+ * compress.c (bfd_is_section_compressed_info): Rename from
+ bfd_is_section_compressed_with_header and add ch_type param
+ to return compression header ch_type field.
+ Update all callers.
+ (decompress_section_contents): Remove buffer and size params.
+ Rewrite. Update callers.
+ (bfd_init_section_compress_status): Free contents on failure.
+ (bfd_compress_section): Likewise.
+ * elf.c (_bfd_elf_make_section_from_shdr): Support objcopy
+ changing between any of the three compression schemes. Report
+ "unable to compress/decompress" rather than "unable to
+ initialize compress/decompress status" on compress/decompress
+ failures.
+ * bfd-in2.h: Regenerate.
+
+2022-10-04 Alan Modra <amodra@gmail.com>
+
+ Re: compress .gnu.debuglto_.debug_* sections if requested
+ Enable zlib-gnu compression for .gnu.debuglto_.debug_*. This differs
+ from zlib-gnu for .debug_* where the name is changed to .zdebug_*.
+ The name change isn't really needed.
+
+ bfd/
+ * elf.c (elf_fake_sections): Replace "." with ".z" in debug
+ section names only when name was ".d*", ie. ".debug_*".
+ (_bfd_elf_assign_file_positions_for_non_load): Likewise.
+ gas/
+ * write.c (compress_debug): Compress .gnu.debuglto_.debug_*
+ for zlib-gnu too. Compress .gnu.linkonce.wi.*.
+
+2022-10-04 Martin Liska <mliska@suse.cz>
+
+ compress .gnu.debuglto_.debug_* sections if requested
+ Right now, when using LTO, the intermediate object files do contain
+ debug info in sections starting with .gnu.debuglto_ prefix and are
+ not compressed when --compress-debug-sections is used.
+
+ It's a mistake and we can save quite some disk space. The following
+ example comes from tramp3d when the corresponding LTO sections
+ are compressed with zlib:
+
+ $ bloaty tramp3d-v4-v2.o -- tramp3d-v4.o
+ FILE SIZE VM SIZE
+ -------------- --------------
+ +83% +10 [ = ] 0 [Unmapped]
+ -68.0% -441 [ = ] 0 .gnu.debuglto_.debug_line
+ -52.3% -759 [ = ] 0 .gnu.debuglto_.debug_line_str
+ -62.4% -3.24Ki [ = ] 0 .gnu.debuglto_.debug_abbrev
+ -64.8% -1.12Mi [ = ] 0 .gnu.debuglto_.debug_info
+ -88.8% -4.58Mi [ = ] 0 .gnu.debuglto_.debug_str
+ -27.7% -5.70Mi [ = ] 0 TOTAL
+
+ bfd/ChangeLog:
+
+ * elf.c (_bfd_elf_make_section_from_shdr): Compress all debug
+ info sections.
+
+ gas/ChangeLog:
+
+ * write.c (compress_debug): Compress also ".gnu.debuglto_.debug_"
+ if the compression algorithm is different from zlib-gnu.
+
+2022-10-04 Jan Beulich <jbeulich@suse.com>
+
+ RISC-V/gas: allow generating up to 176-bit instructions with .insn
+ For the time being simply utilize O_big to avoid widening other fields,
+ bypassing append_insn() etc.
+
+ RISC-V/gas: don't open-code insn_length()
+ Use the helper when it can be used.
+
+ RISC-V/gas: drop stray call to install_insn()
+ add_fixed_insn(), by calling move_insn(), already invokes install_insn().
+
+ RISC-V/gas: drop riscv_subsets static variable
+ It's fully redundant with the subset_list member of riscv_rps_as.
+
+ RISC-V: don't cast expressions' X_add_number to long in diagnostics
+ There's no need for such workarounds anymore now that we use C99
+ uniformly. This addresses several testsuite failures encountered when
+ (cross-)building on a 32-bit host.
+
+2022-10-04 Potharla, Rupesh <Rupesh.Potharla@amd.com>
+
+ ignore DWARF debug information for -gsplit-dwarf with dwarf-5
+ Skip dwo_id for split dwarf.
+
+ * dwarf2.c (parse_comp_unit): Skip DWO_id for DW_UT_skeleton.
+
+2022-10-04 GDB Administrator <gdbadmin@sourceware.org>
+
+ Automatic date update in version.in
+
+2022-10-03 Jan-Benedict Glaw <jbglaw@lug-owl.de>
+
+ Fix self-move warning check for GCC 13+
+ GCC 13 got the self-move warning (0abb78dda084a14b3d955757c6431fff71c263f3),
+ but that warning is only checked for clang, resulting in:
+
+ /usr/lib/gcc-snapshot/bin/g++ -x c++ -I. -I. -I./config -DLOCALEDIR="\"/tmp/gdb-m68k-linux/share/locale\"" -DHAVE_CONFIG_H -I./../include/opcode -I./../readline/readline/.. -I./../zlib -I../bfd -I./../bfd -I./../include -I../libdecnumber -I./../libdecnumber -I./../gnulib/import -I../gnulib/import -I./.. -I.. -I./../libbacktrace/ -I../libbacktrace/ -DTUI=1 -I./.. -pthread -Wall -Wpointer-arith -Wno-unused -Wunused-value -Wunused-variable -Wunused-function -Wno-switch -Wno-char-subscripts -Wempty-body -Wunused-but-set-parameter -Wunused-but-set-variable -Wno-sign-compare -Wno-error=maybe-uninitialized -Wno-mismatched-tags -Wsuggest-override -Wimplicit-fallthrough=3 -Wduplicated-cond -Wshadow=local -Wdeprecated-copy -Wdeprecated-copy-dtor -Wredundant-move -Wmissing-declarations -Wstrict-null-sentinel -Wformat -Wformat-nonliteral -Werror -g -O2 -c -o unittests/environ-selftests.o -MT unittests/environ-selftests.o -MMD -MP -MF unittests/.deps/environ-selftests.Tpo unittests/environ-selftests.c
+ unittests/environ-selftests.c: In function 'void selftests::gdb_environ_tests::test_self_move()':
+ unittests/environ-selftests.c:228:7: error: moving 'env' of type 'gdb_environ' to itself [-Werror=self-move]
+ 228 | env = std::move (env);
+ | ~~~~^~~~~~~~~~~~~~~~~
+ unittests/environ-selftests.c:228:7: note: remove 'std::move' call
+ cc1plus: all warnings being treated as errors
+ make[1]: *** [Makefile:1896: unittests/environ-selftests.o] Error 1
+ make[1]: Leaving directory '/var/lib/laminar/run/gdb-m68k-linux/3/binutils-gdb/gdb'
+ make: *** [Makefile:13193: all-gdb] Error 2
+
+2022-10-03 Simon Marchi <simon.marchi@polymtl.ca>
+
+ gdb: constify inferior::target_is_pushed
+ Change-Id: Ia4143b9c63cb76e2c824ba773c66f5c5cd94b2aa
+
+2022-10-03 Luis Machado <luis.machado@arm.com>
+
+ [AArch64] Handle W registers as pseudo-registers instead of aliases of X registers
+ The aarch64 port handles W registers as aliases of X registers. This is
+ incorrect because X registers are 64-bit and W registers are 32-bit.
+
+ This patch teaches GDB how to handle W registers as pseudo-registers of
+ 32-bit, the bottom half of the X registers.
+
+ Testcase included.
+
+2022-10-03 Luis Machado <luis.machado@arm.com>
+
+ [AArch64] Fix pseudo-register numbering in the presence of unexpected additional registers
+ When using AArch64 GDB with the QEMU debugging stub (in user mode), we get
+ additional system registers that GDB doesn't particularly care about, so
+ it doesn't number those explicitly.
+
+ But given the pseudo-register numbers are above the number of real registers,
+ we need to setup/account for the real registers first before going ahead and
+ numbering the pseudo-registers. This has to happen at the end of
+ aarch64_gdbarch_init, after the call to tdesc_use_registers, as that
+ updates the total number of real registers.
+
+ This is in preparation to supporting pointer authentication for bare metal
+ aarch64 (QEMU).
+
+2022-10-03 Nick Clifton <nickc@redhat.com>
+
+ readelf: DO not load section headers from file offset zero
+ * readelf.c (get_32bit_section_headers): Return false if the
+ e_shoff field is zero.
+ (get_64bit_section_headers): Likewise.
+
+2022-10-03 Tsukasa OI <research_trasio@irq.a4lg.com>
+
+ RISC-V: Move supervisor instructions after all unprivileged ones
+ This location of supervisor instructions is out of place (because many other
+ privileged instructions are located at the tail but after the supervisor
+ instructions, we have many unprivileged instructions including bit
+ manipulation / crypto / vector instructions).
+
+ Not only that, this is harmful to implement pseudoinstructions in the latest
+ 'P'-extension proposal (CLROV and RDOV). This commit moves supervisor
+ instructions after all unprivileged instructions.
+
+ opcodes/ChangeLog:
+
+ * riscv-opc.c (riscv_opcodes): Adjust indents. Move supervisor
+ instructions after all unprivileged instructions.
+
+2022-10-03 Bruno Larsen <blarsen@redhat.com>
+
+ Improve GDB's baseclass detection with typedefs
+ When a class inherits from a typedef'd baseclass, GDB may be unable to
+ find the baseclass if the user is not using the typedef'd name, as is
+ tested on gdb.cp/virtbase2.exp; the reason that test case is working
+ under gcc is that the dwarf generated by gcc links the class to the
+ original definition of the baseclass, not to the typedef. If the
+ inheritance is linked to the typedef, such as how clang does it,
+ gdb.cp/virtbase2.exp starts failing.
+
+ This can also be seen in gdb.cp/impl-this.exp, when attempting to print
+ D::Bint::i, and GDB not being able to find the baseclass Bint.
+
+ This happens because searching for baseclasses only uses the macro
+ TYPE_BASECLASS_NAME, which returns the typedef'd name. However, we can't
+ switch that macro to checking for typedefs, otherwise we wouldn't be
+ able to find the typedef'd name anymore. This is fixed by searching for
+ members or baseclasses by name, we check both the saved name and the
+ name after checking for typedefs.
+
+ This also fixes said long-standing bug in gdb.cp/impl-this.exp when the
+ compiler adds information about typedefs in the debuginfo.
+
+2022-10-03 Tsukasa OI <research_trasio@irq.a4lg.com>
+
+ RISC-V: Assign DWARF numbers to vector registers
+ This commit assigns DWARF register numbers to vector registers (v0-v31:
+ 96..127) to implement RISC-V DWARF Specification version 1.0-rc4
+ (now in the frozen state):
+
+ https://github.com/riscv-non-isa/riscv-elf-psabi-doc/releases/tag/v1.0-rc4
+
+ binutils/ChangeLog:
+
+ * dwarf.c (dwarf_regnames_riscv): Assign DWARF register numbers
+ 96..127 to vector registers v0-v31.
+
+ gas/ChangeLog:
+
+ * config/tc-riscv.c (tc_riscv_regname_to_dw2regnum): Support
+ vector registers.
+ * testsuite/gas/riscv/dw-regnums.s: Add vector registers to the
+ DWARF register number test.
+ * testsuite/gas/riscv/dw-regnums.d: Likewise.
+
+2022-10-03 Tsukasa OI <research_trasio@irq.a4lg.com>
+
+ RISC-V: Add testcase for DWARF register numbers
+ Although it had csr-dw-regnums.d (for CSRs), it didn't have DWARF register
+ number test for GPRs/FPRs.
+
+ This commit adds dw-regnums.{s,d} to test such registers.
+
+ gas/ChangeLog:
+
+ * testsuite/gas/riscv/dw-regnums.s: New DWARF register number test
+ for GPRs/FPRs.
+ * testsuite/gas/riscv/dw-regnums.d: Likewise.
+
+2022-10-03 GDB Administrator <gdbadmin@sourceware.org>
+
+ Automatic date update in version.in
+
+2022-10-02 Tom de Vries <tdevries@suse.de>
+
+ [gdb/testsuite] Fix waitpid testing in next-fork-other-thread.c
+ In next-fork-other-thread.c, there's this loop:
+ ...
+ do
+ {
+ ret = waitpid (pid, &stat, 0);
+ } while (ret == EINTR);
+ ...
+
+ The loop condition tests for "ret == EINTR" but waitpid signals EINTR by
+ returning -1 and setting errno to EINTR.
+
+ Fix this by changing the loop condition to "ret == -1 && errno == EINTR".
+
+ Tested on x86_64-linux.
+
+2022-10-02 Andrew Burgess <aburgess@redhat.com>
+
+ gdb/testsuite: handle invalid .exp names passed in TESTS
+ I ran some tests like:
+
+ $ make check-gdb TESTS="gdb.base/break.exp"
+
+ then, then I went to rerun the tests later, I managed to corrupt the
+ command line, like this:
+
+ $ make check-gdb TESTS="gdb.base/breakff.exp"
+
+ the make command did exit with an error, but DejaGnu appeared to
+ report that every test passed! The tail end of the output looks like
+ this:
+
+ Illegal Argument "no-matching-tests-found"
+ try "runtest --help" for option list
+ === gdb Summary ===
+
+ # of expected passes 115
+ /tmp/build/gdb/gdb version 13.0.50.20220831-git -nw -nx -iex "set height 0" -iex "set width 0" -data-directory /tmp/build/gdb/testsuite/../data-directory
+
+ make[3]: *** [Makefile:212: check-single] Error 1
+ make[3]: Leaving directory '/tmp/build/gdb/testsuite'
+ make[2]: *** [Makefile:161: check] Error 2
+ make[2]: Leaving directory '/tmp/build/gdb/testsuite'
+ make[1]: *** [Makefile:1916: check] Error 2
+ make[1]: Leaving directory '/tmp/build/gdb'
+ make: *** [Makefile:13565: check-gdb] Error 2
+
+ For a while, I didn't spot that DejaGnu had failed at all, I saw the
+ 115 passes, and thought everything had run correctly - though I was
+ puzzled that make was reporting an error.
+
+ What happens is that in gdb/testsuite/Makefile, in the check-single
+ rule, we first run DejaGnu, then run the dg-add-core-file-count.sh
+ script, and finally, we use sed to extract the results from the
+ gdb.sum file.
+
+ In my case, with the invalid test name, DejaGnu fails, but the
+ following steps are still run, the final result, the 115 passes, is
+ then extracted from the pre-existing gdb.sum file.
+
+ If I use 'make -jN' then the 'check-parallel' rule, rather than the
+ 'check-single' rule is used. In this case the behaviour is slightly
+ different, the tail end of the output now looks like this:
+
+ No matching tests found.
+
+ make[4]: Leaving directory '/tmp/build/gdb/testsuite'
+ find: ‘outputs’: No such file or directory
+ Usage: ../../../src/gdb/testsuite/../../contrib/dg-extract-results.py [-t tool] [-l variant-list] [-L] log-or-sum-file ...
+
+ tool The tool (e.g. g++, libffi) for which to create a
+ new test summary file. If not specified then output
+ is created for all tools.
+ variant-list One or more test variant names. If the list is
+ not specified then one is constructed from all
+ variants in the files for <tool>.
+ sum-file A test summary file with the format of those
+ created by runtest from DejaGnu.
+ If -L is used, merge *.log files instead of *.sum. In this
+ mode the exact order of lines may not be preserved, just different
+ Running *.exp chunks should be in correct order.
+ find: ‘outputs’: No such file or directory
+ Usage: ../../../src/gdb/testsuite/../../contrib/dg-extract-results.py [-t tool] [-l variant-list] [-L] log-or-sum-file ...
+
+ tool The tool (e.g. g++, libffi) for which to create a
+ new test summary file. If not specified then output
+ is created for all tools.
+ variant-list One or more test variant names. If the list is
+ not specified then one is constructed from all
+ variants in the files for <tool>.
+ sum-file A test summary file with the format of those
+ created by runtest from DejaGnu.
+ If -L is used, merge *.log files instead of *.sum. In this
+ mode the exact order of lines may not be preserved, just different
+ Running *.exp chunks should be in correct order.
+ make[3]: Leaving directory '/tmp/build/gdb/testsuite'
+ make[2]: Leaving directory '/tmp/build/gdb/testsuite'
+ make[1]: Leaving directory '/tmp/build/gdb'
+
+ Rather than DejaGnu failing, we now get a nice 'No matching tests
+ found' message, followed by some other noise. This other noise is
+ first `find` failing, followed by the dg-extract-results.py script
+ failing.
+
+ What happens here is that, in the check-parallel rule, the outputs
+ directory is deleted before DejaGnu is invoked. Then we try to run
+ all the tests, and finally we use find and dg-extract-results.py to
+ combine all the separate .sun and .log files together. However, if
+ there are no tests run then the outputs/ directory is never created,
+ so the find command and consequently the dg-extract-results.py script,
+ fail.
+
+ This commit aims to fix the following issues:
+
+ (1) For check-single and check-parallel rules, don't run any of the
+ post-processing steps if DejaGnu failed to run. This will avoid all
+ the noise after the initial failure of DejaGnu,
+
+ (2) For check-single ensure that we don't accidentally report
+ previous results, this is related to the above, but is worth calling
+ out as a separate point, and
+
+ (3) For check-single, print the 'No matching tests found' message
+ just like we do for a parallel test run. This makes the parallel and
+ non-parallel testing behaviour more similar, and I think is clearer
+ than the current 'Illegal Argument' error message.
+
+ Points (1) and (2) will be handled by moving the post processing steps
+ inside an if block within the recipe. For check-single I propose
+ deleting the gdb.sum and gdb.log files before running DejaGnu, this is
+ similar (I think) to how we delete the outputs/ directory in the
+ check-parallel rule.
+
+ For point (3) I plan to split the check-single rule in two, the
+ existing check-single will be renamed do-check-single, then a new
+ check-single rule will be added. The new check-single rule can either
+ depend on the new do-check-single, or will ensure the 'No matching
+ tests found' message is printed when appropriate.
+
+2022-10-02 Andrew Burgess <aburgess@redhat.com>
+
+ gdb/disasm: better intel flavour disassembly styling with Pygments
+ This commit was inspired by this stackoverflow post:
+
+ https://stackoverflow.com/questions/73491793/why-is-there-a-%C2%B1-in-lea-rax-rip-%C2%B1-0xeb3
+
+ One of the comments helpfully links to this Python test case:
+
+ from pygments import formatters, lexers, highlight
+
+ def colorize_disasm(content, gdbarch):
+ try:
+ lexer = lexers.get_lexer_by_name("asm")
+ formatter = formatters.TerminalFormatter()
+ return highlight(content, lexer, formatter).rstrip().encode()
+ except:
+ return None
+
+ print(colorize_disasm("lea [rip+0x211] # COMMENT", None).decode())
+
+ Run the test case and you should see that the '+' character is
+ underlined, and could be confused with a combined +/- symbol.
+
+ What's happening is that Pygments is failing to parse the input text,
+ and the '+' is actually being marked in the error style. The error
+ style is red and underlined.
+
+ It is worth noting that the assembly instruction being disassembled
+ here is an x86-64 instruction in the 'intel' disassembly style, rather
+ than the default att style. Clearly the Pygments module expects the
+ att syntax by default.
+
+ If we change the test case to this:
+
+ from pygments import formatters, lexers, highlight
+
+ def colorize_disasm(content, gdbarch):
+ try:
+ lexer = lexers.get_lexer_by_name("asm")
+ lexer.add_filter('raiseonerror')
+ formatter = formatters.TerminalFormatter()
+ return highlight(content, lexer, formatter).rstrip().encode()
+ except:
+ return None
+
+ res = colorize_disasm("lea rax,[rip+0xeb3] # COMMENT", None)
+ if res:
+ print(res.decode())
+ else:
+ print("No result!")
+
+ Here I've added the call: lexer.add_filter('raiseonerror'), and I am
+ now checking to see if the result is None or not. Running this and
+ the test now print 'No result!' - instead of styling the '+' in the
+ error style, we instead give up on the styling attempt.
+
+ There are two things we need to fix relating to this disassembly
+ text. First, Pygments is expecting att style disassembly, not the
+ intel style that this example uses. Fortunately, Pygments also
+ supports the intel style, all we need to do is use the 'nasm' lexer
+ instead of the 'asm' lexer.
+
+ However, this leads to the second problem; in our disassembler line we
+ have '# COMMENT'. The "official" Intel disassembler style uses ';'
+ for its comment character, however, gas and libopcodes use '#' as the
+ comment character, as gas uses ';' for an instruction separator.
+
+ Unfortunately, Pygments expects ';' as the comment character, and
+ treats '#' as an error, which means, with the addition of the
+ 'raiseonerror' filter, that any line containing a '#' comment, will
+ not get styled correctly.
+
+ However, as the i386 disassembler never produces a '#' character other
+ than for comments, we can easily "fix" Pygments parsing of the
+ disassembly line. This is done by creating a filter. This filter
+ looks for an Error token with the value '#', we then change this into
+ a comment token. Every token after this (until the end of the line)
+ is also converted into a comment.
+
+ In this commit I do the following:
+
+ 1. Check the 'disassembly-flavor' setting and select between the
+ 'asm' and 'nasm' lexers based on the setting. If the setting is not
+ available then the 'asm' lexer is used by default,
+
+ 2. Use "add_filter('raiseonerror')" to ensure that the formatted
+ output will not include any error text, which would be underlined,
+ and might be confusing,
+
+ 3. If the 'nasm' lexer is selected, then add an additional filter
+ that will format '#' and all other text on the line, as a comment,
+ and
+
+ 4. If Pygments throws an exception, instead of returning None,
+ return the original, unmodified content. This will mean that this
+ one instruction is printed without styling, but GDB will continue to
+ call into the Python code to style later instructions.
+
+ I haven't included a test specifically for the above error case,
+ though I have manually check that the above case now styles
+ correctly (with no underline). The existing style tests check that
+ the disassembler styling still works though, so I know I've not
+ generally broken things.
+
+ One final thought I have after looking at this issue is that I wonder
+ now if using Pygments for styling disassembly from every architecture
+ is actually a good idea?
+
+ Clearly, the 'asm' lexer is OK with att style x86-64, but not OK with
+ intel style x86-64, so who knows how well it will handle other random
+ architectures?
+
+ When I first added this feature I tested it against some random
+ RISC-V, ARM, and X86-64 (att style) code, and it seemed fine, but I
+ never tried to make an exhaustive check of all instructions, so its
+ quite possible that there are corner cases where things are styled
+ incorrectly.
+
+ With the above changes I think that things should be a bit better
+ now. If a particular instruction doesn't parse correctly then our
+ Pygments based styling code will just not style that one instruction.
+ This is combined with the fact that many architectures are now moving
+ to libopcodes based styling, which is much more reliable.
+
+ So, I think it is fine to keep using Pygments as a fallback mechanism
+ for styling all architectures, even if we know it might not be perfect
+ in all cases.
+
+2022-10-02 Andrew Burgess <aburgess@redhat.com>
+
+ gdb: improve disassembler styling when Pygments raises an exception
+ While working on another issue relating to GDB's use of the Python
+ Pygments package for disassembly styling I noticed an issue in the
+ case where the Pygments package raises an exception.
+
+ The intention of the current code is that, should the Pygments package
+ raise an exception, GDB will disable future attempts to call into the
+ Pygments code. This was intended to prevent repeated errors during
+ disassembly if, for some reason, the Pygments code isn't working.
+
+ Since the Pygments based styling was added, GDB now supports
+ disassembly styling using libopcodes, but this is only available for
+ some architectures. For architectures not covered by libopcodes
+ Pygments is still the only option.
+
+ What I observed is that, if I disable the libopcodes styling, then
+ setup GDB so that the Pygments based styling code will indicate an
+ error (by returning None), GDB does, as expected, stop using the
+ Pygments based styling. However, the libopcodes based styling will
+ instead be used, despite this feature having been disabled.
+
+ The problem is that the disassembler output is produced into a
+ string_file buffer. When we are using Pygments, this buffer is
+ created without styling support. However, when Pygments fails, we
+ recreate the buffer with styling support.
+
+ The problem is that we should only recreate the buffer with styling
+ support only if libopcodes styling is enabled. This was an oversight
+ in commit:
+
+ commit 4cbe4ca5da5cd7e1e6331ce11f024bf3c07b9744
+ Date: Mon Feb 14 14:40:52 2022 +0000
+
+ gdb: add support for disassembler styling using libopcodes
+
+ This commit:
+
+ 1. Factors out some of the condition checking logic into two new
+ helper functions use_ext_lang_for_styling and
+ use_libopcodes_for_styling,
+
+ 2. Reorders gdb_disassembler::m_buffer and gdb_disassembler::m_dest,
+ this allows these fields to be initialised m_dest first, which means
+ that the new condition checking functions can rely on m_dest being
+ set, even when called from the gdb_disassembler constructor,
+
+ 3. Make use of the new condition checking functions each time
+ m_buffer is initialised,
+
+ 4. Add a new test that forces the Python disassembler styling
+ function to return None, this will cause GDB to disable use of
+ Pygments for styling, and
+
+ 5. When we reinitialise m_buffer, and re-disassemble the
+ instruction, call reset the in-comment flag. If the instruction
+ being disassembler ends in a comment then the first disassembly pass
+ will have set the in-comment flag to true. This shouldn't be a
+ problem as we will only be using Pygments, and thus performing a
+ re-disassembly pass, if libopcodes is disabled, so the in-comment
+ flag will never be checked, even if it is set incorrectly. However,
+ I think that having the flag set correctly is a good thing, even if
+ we don't check it (you never know what future uses might come up).
+
+2022-10-02 Andrew Burgess <aburgess@redhat.com>
+
+ gdb/testsuite: extend styling test for libopcodes styling
+ This commit extends the gdb.base/style.exp test to cover disassembler
+ styling using libopcodes (where available).
+
+ The test will try to enable libopcode based styling, if this
+ works (because such styling is available) then some tests are run to
+ check that the output is styled, and that the styling can be disabled
+ using 'set style disassembler enabled off'. If libopcodes styling is
+ not available on the current architecture then these new tests will be
+ skipped.
+
+ I've moved the Python Pygments module check inside the
+ test_disable_disassembler_styling function now, so that the test will
+ be run even when Python Pygments is not available, this allows the new
+ tests discussed above.
+
+ If the Pygments module is not available then the Pygments based tests
+ will be skipped just as they were before.
+
+2022-10-02 Andrew Burgess <aburgess@redhat.com>
+
+ gdb: update now gdbarch_register_name doesn't return nullptr
+ After the previous few commit, gdbarch_register_name no longer returns
+ nullptr. This commit audits all the calls to gdbarch_register_name
+ and removes any code that checks the result against nullptr.
+
+ There should be no visible change after this commit.
+
+2022-10-02 Andrew Burgess <aburgess@redhat.com>
+
+ gdb: final cleanup of various gdbarch_register_name methods
+ Building on the previous commits, this commit goes through the various
+ gdbarch_register_name methods and removes all the remaining 'return
+ NULL' cases, I claim that these either couldn't be hit, or should be
+ returning the empty string.
+
+ In all cases the return of NULL was used if the register number being
+ passed to gdbarch_register_name was "invalid", i.e. negative, or
+ greater than the total number of declared registers. I don't believe
+ either of these cases can occur, and the previous commit asserts that
+ this is the case. As a result we can simplify the code by removing
+ these checks. In many cases, where the register names are held in an
+ array, I was able to add a static assert that the array contains the
+ correct number of strings, after that, a direct access into the array
+ is fine.
+
+ I don't have any means of testing these changes.
+
+2022-10-02 Andrew Burgess <aburgess@redhat.com>
+
+ gdb/csky: remove nullptr return from csky_pseudo_register_name
+ Building on the previous commits, in this commit I remove two
+ instances of 'return NULL' from csky_pseudo_register_name, and replace
+ them with a return of the empty string.
+
+ These two are particularly interesting, and worth pulling into their
+ own commit, because these returns of NULL appear to be depended on
+ within other parts of the csky code.
+
+ In csky-linux-tdep.c in the register collect/supply code, GDB checks
+ for the register name being nullptr in order to decide if a target
+ supports a particular feature or not. I've updated the code to check
+ for the empty string.
+
+ I have no way of testing this change.
+
+2022-10-02 Andrew Burgess <aburgess@redhat.com>
+
+ gdb: add asserts to gdbarch_register_name
+ This commit adds asserts to gdbarch_register_name that validate the
+ parameters, and the return value.
+
+ The interesting thing here is that gdbarch_register_name is generated
+ by gdbarch.py, and so, to add these asserts, I need to update the
+ generation script.
+
+ I've added two new arguments for Functions and Methods (as declared in
+ gdbarch-components.py), these arguments are 'param_checks' and
+ 'result_checks'. Each of these new arguments can be used to list some
+ expressions that are then used within gdb_assert calls in the
+ generated code.
+
+ The asserts that validate the API as described in the comment I added
+ to gdbarch_register_name a few commits back; the register number
+ passed in needs to be a valid cooked register number, and the result
+ being returned should not be nullptr.
+
+2022-10-02 Andrew Burgess <aburgess@redhat.com>
+
+ gdb: check for duplicate register names in selftest
+ Building on the previous commit, this commit extends the register_name
+ selftest to check for duplicate register names.
+
+ If two registers in the cooked register set (real + pseudo registers)
+ have the same name, then this will show up as duplicate registers in
+ the 'info all-registers' output, but the user will only be able to
+ interact with one copy of the register.
+
+ In this commit I extend the selftest that I added in the previous
+ commit to check for duplicate register names, I didn't include this
+ functionality in the previous commit because one architecture needed
+ fixing, and I wanted to keep those fixes separate from the fixes in
+ the previous commit.
+
+ The problematic architecture(s) are powerpc:750 and powerpc:604. In
+ both of these cases the 'dabr' register appears twice, there's a
+ definition of dabr in power-oea.xml which is included into both
+ powerpc-604.xml and powerpc-750.xml. Both of these later two xml
+ files also define the dabr register.
+
+ I'm hopeful that this change shouldn't break anything, but I don't
+ have the ability to actually test this change, however:
+
+ On the gdbserver side, neither powerpc-604.xml nor powerpc-750.xml are
+ mentioned in gdbserver/configure.srv, which I think means that
+ gdbserver will never use these descriptions, and,
+
+ Within GDB the problematic descriptions are held in the variables
+ tdesc_powerpc_604 and tdesc_powerpc_750, which are only mentioned in
+ the variants array in rs6000-tdep.c, this is used when looking up a
+ description based on the architecture.
+
+ For a native Linux target however, this will not be used as
+ ppc_linux_nat_target::read_description exists, which calls
+ ppc_linux_match_description, which I don't believe can return either
+ of the problematic descriptions.
+
+ This leaves the other native targets, FreeBSD, AIX, etc. These don't
+ appear to override the ::read_description method, so will potentially
+ return the problematic descriptions, but, in each case I think the
+ ::fetch_registers and ::store_registers methods will ignore the dabr
+ register, which will leave the register as <unavailable>.
+
+ So, my proposed solution is to just remove the duplicate register from
+ each of powerpc-604.xml and powerpc-750.xml, then regenerate the
+ corresponding C++ source file. With this change made, the selftest
+ now passes for all architectures.
+
+2022-10-02 Andrew Burgess <aburgess@redhat.com>
+
+ gdb: add a gdbarch_register_name self test, and fix some architectures
+ This commit adds a self-test that checks that gdbarch_register_name
+ never returns nullptr for any valid register number.
+
+ Most architectures already met this requirement, there were just 6
+ that failed the new selftest, and are updated in this commit.
+
+ Beyond the self-tests I don't have any facilities to test that the
+ architectures I've adjusted still work correctly.
+
+ If you review all the various gdbarch_register_name implementations
+ then you will see that there are far more architectures that seem like
+ they might return nullptr in some situations, e.g. alpha, avr, bpf,
+ etc. This commit doesn't attempt to address these cases as non of
+ them are hit during the selftest. Many of these cases can never be
+ hit, for example, in alpha_register_name GDB checks for a register
+ number less than zero, this case can't happen and could be changed
+ into an assert.
+
+ A later commit in this series will have a general cleanup of all the
+ various register_name methods, and remove all references to NULL from
+ their code, however, as that commit will be mostly adjusting code that
+ is never hit, I want to keep those changes separate.
+
+ The selftest has been tested on x86-64, but I don't have access to
+ suitable systems to fully test any of the *-tdep.c code I've changed
+ in this commit.
+
+2022-10-02 Andrew Burgess <aburgess@redhat.com>
+
+ gdb/gdbarch: add a comment to gdbarch_register_name
+ After the previous commit, this commit sets out to formalise the API
+ for gdbarch_register_name. Not every architecture is actually in
+ compliance with the API I set out here, but I believe that most are.
+
+ I think architectures that don't comply with the API laid out here
+ will fail the gdb.base/completion.exp test.
+
+ The claims in the comment are I feel, best demonstrated with the
+ asserts in this code:
+
+ const char *
+ gdbarch_register_name (struct gdbarch *gdbarch, int regnr)
+ {
+ gdb_assert (regnr >= 0);
+ gdb_assert (regnr < gdbarch_num_cooked_regs (gdbarch));
+
+ const char *name = gdbarch->register_name (gdbarch, regnr);
+
+ gdb_assert (name != nullptr);
+
+ return name;
+ }
+
+ Like I said, I don't believe every architecture follows these rules
+ right now, which is why I'm not actually adding any asserts. Instead,
+ this commit adds a comment to gdbarch_register_name, this comment is
+ where I'd like to get to, rather than where we are right now.
+
+ Subsequent commits will fix all targets to be in compliance with this
+ comment, and will even add the asserts shown above to
+ gdbarch_register_name.
+
+2022-10-02 Andrew Burgess <aburgess@redhat.com>
+
+ gdb/riscv: fix failure in gdb.base/completion.exp
+ I noticed a test failure in gdb.base/completion.exp for RISC-V on
+ a native Linux target, this is the failure:
+
+ (gdb) FAIL: gdb.base/completion.exp: complete 'info registers '
+
+ The problem is caused by a mismatch in the output of 'maint print
+ registers' and the completion list for 'info registers'. The 'info
+ registers' completion list contains less registers than
+ expected. Additionally, the list of registers extracted from the
+ 'maint print registers' list was wrong too, in some cases the test was
+ grabbing the register number, rather than a register name,
+
+ Both of these problems have the same root cause, riscv_register_name
+ returns nullptr for some registers when it should return an empty
+ string.
+
+ The gdbarch_register_name API is not clearly documented anywhere, and
+ at first glance it would appear that the function can return either
+ nullptr, or an empty string to indicate that a register is not
+ available on the current target. Indeed, there are plenty of places
+ in GDB where we compare the output of gdbarch_register_name to both
+ nullptr and '\0' in order to see if a register is supported or not,
+ and there are plenty of targets that return empty string in some
+ cases, and nullptr in others.
+
+ However, the 'info registers' completion code (reg_or_group_completer)
+ clearly depends on user_reg_map_regnum_to_name only returning nullptr
+ when the passed in regnum is greater than the maximum possible
+ register number (i.e. after all physical registers, pseudo-registers,
+ and user-registers), this means that gdbarch_register_name should not
+ be returning nullptr.
+
+ I did consider "fixing" user_reg_map_regnum_to_name, if
+ gdbarch_register_name returns nullptr, I could convert to an empty
+ string at this point, but that felt like a real hack, so I discarded
+ that plan.
+
+ The next possibility I considered was "fixing" reg_or_group_completer
+ to not rely on nullptr to indicate the end marker. Or rather, I could
+ have reg_or_group_completer use gdbarch_num_cooked_regs, we know that
+ we should check at least that many register numbers. Then, once we're
+ passed that limit, we keep checking until we hit a nullptr. This
+ would absolutely work, and didn't actually feel that bad, but, it
+ still felt a little weird that gdbarch_register_name could return
+ nullptr OR the empty string to mean the same thing, so I wondered if
+ the "right" solution was to have gdbarch_register_name not return
+ nullptr. With this in mind I tried an experiment:
+
+ I added a self-test that, for each architecture, calls
+ gdbarch_register_name for every register number up to the
+ gdbarch_num_cooked_regs limit, and checks that the name is not
+ nullptr.
+
+ Only a handful of architectures failed this test, RISC-V being one of
+ them.
+
+ This seems to suggest that most architectures agree that the correct
+ API for gdbarch_register_name is to return an empty string for
+ registers that are not supported on the current target, and that
+ returning nullptr is really a mistake.
+
+ In this commit I will update the RISC-V target so that GDB no longer
+ returns nullptr from riscv_register_name, instead we return the empty
+ string.
+
+ In subsequent commits I will add the selftest that I mention above,
+ and will fix the targets that fail the selftest.
+
+ With this change the gdb.base/completion.exp test now passes.
+
+2022-10-02 Andrew Burgess <aburgess@redhat.com>
+
+ gdb/testsuite: rewrite capture_command_output proc
+ I noticed a test failure in gdb.base/completion.exp for RISC-V on a
+ native Linux target. Upon investigation I discovered a couple of
+ reasons for the failure, this commit addresses one of them. A later
+ commit will address the other issue.
+
+ The completion.exp test makes use of the capture_command_output proc
+ to collect the output of the 'maint print registers' command. For
+ RISC-V this command produces a lot of output.
+
+ Currently the capture_command_output proc tries to collect the
+ complete command output in a single expect buffer, and what I see is
+ an error caused by the expect buffer becoming full.
+
+ This commit rewrites capture_command_output to make use of
+ gdb_test_multiple to collect the command output line at a time, in
+ this way we avoid overflowing the expect buffer.
+
+ The capture_command_output proc has some logic for skipping a prefix
+ pattern, which is passed in to the proc as an argument. In order to
+ handle this correctly (only matching the prefix at the start of the
+ command output), I use two gdb_test_multiple calls, the first spots
+ and discards the echoed command and the (optional) prefix pattern, the
+ second gdb_test_multiple call then collects the rest of the command
+ output line at a time until a prompt is seen.
+
+ There is one slight oddity with the current implementation, which I
+ have changed in my rewrite, this does, slightly, change the behaviour
+ of the proc.
+
+ The current implementation uses this pattern:
+
+ -re "[string_to_regexp ${command}]\[\r\n\]+${prefix}(.*)\[\r\n\]+$gdb_prompt $"
+
+ Now a typical command output will look like this:
+
+ output here\r\n
+ (gdb)
+
+ As the TCL regexp matching is greedy, TCL will try to match as much as
+ possible in one part of the pattern before moving on to the next.
+ Thus, when this matches against (.*)[\r\n]+, the (.*) will end up
+ matching against 'output here\r' and the [\r\n]+ will match '\n' only.
+
+ In short the previous implementation would leave the '\r' on the end
+ of the returned text, but not the final trailing '\n'.
+
+ Now clearly I could make a new version of capture_command_output that
+ maintained this behaviour, but I couldn't see any reason to do this.
+ So, my new implementation drops the final '\r\n' completely, in our
+ example above we now return 'output here' with no '\r'.
+
+ This change doesn't seem to affect any of the existing tests, but I
+ thought it was worth mentioning.
+
+2022-10-02 Andrew Burgess <aburgess@redhat.com>
+
+ gdb/mi: new options for -data-disassemble command
+ Now that the disassembler has two different strategies for laying out
+ the opcode bytes of an instruction (see /r vs /b for the disassemble
+ command), I wanted to add support for this to the MI disassemble
+ command.
+
+ Currently the -data-disassemble command takes a single 'mode' value,
+ which currently has 6 different values (0 -> 5), 3 of these modes
+ relate to opcode display.
+
+ So, clearly I should just add an additional 3 modes to handle the new
+ opcode format, right?
+
+ No, I didn't think that was a great idea either.
+
+ So, I wonder, could I adjust the -data-disassemble command in a
+ backward compatible way, that would allow GDB to move away from using
+ the mode value altogether?
+
+ I think we can.
+
+ In this commit, I propose adding two new options to -data-disassemble,
+ these are:
+
+ --opcodes none|bytes|display
+ --source
+
+ Additionally, I will make the mode optional, and default to mode 0 if
+ no mode value is given. Mode 0 is the simplest, no source code, no
+ opcodes disassembly mode.
+
+ The two new options are only valid for mode 0, if they are used with
+ any other mode then an error is thrown.
+
+ The --opcodes option can add opcodes to the result, with 'bytes' being
+ equivalent to 'disassemble /b' and 'display' being 'disassemble /r'.
+
+ The --source option will enable the /s style source code display, this
+ is equivalent to modes 4 and 5. There is no way, using the new
+ command options to get the now deprecated /m style source code
+ display, that is mode 1 and 3.
+
+ My hope is that new users of the MI will not use the mode at all, and
+ instead will just use the new options to achieve the output they need.
+ Existing MI users can continue to use the mode, and will not need to
+ be updated to use the new options.
+
+2022-10-02 Andrew Burgess <aburgess@redhat.com>
+
+ gdb/mi: some int to bool conversion
+ Just some simple int to bool conversion in mi_cmd_disassemble. There
+ should be no user visible changes after this commit.
+
+2022-10-02 Andrew Burgess <aburgess@redhat.com>
+
+ gdb/doc: update syntax of -data-disassemble command arguments
+ The argument documentation for -data-disassemble looks like this:
+
+ -data-disassemble
+ [ -s @var{start-addr} -e @var{end-addr} ]
+ | [ -a @var{addr} ]
+ | [ -f @var{filename} -l @var{linenum} [ -n @var{lines} ] ]
+ -- @var{mode}
+
+ However, I believe, according to the 'Notation and Terminology'
+ section, this means that the there are 3 optional location
+ specification argument groups for the command, followed by a
+ non-optional '-- mode'.
+
+ However, this is not true, one of the location specifications must be
+ given, i.e. we can't choose to give NO location specification, which
+ is what the above implies.
+
+ I propose that we change this to instead be:
+
+ -data-disassemble
+ ( -s @var{start-addr} -e @var{end-addr}
+ | -a @var{addr}
+ | -f @var{filename} -l @var{linenum} [ -n @var{lines} ] )
+ -- @var{mode}
+
+ By placing all the location specifications within '( ... )' we
+ indication that these are a group, from which one of the options,
+ separated by '|', must be selected.
+
+ However, the 'Notation and Terminology' section only describes two
+ uses for parenthesis: '( GROUP )*' and '( GROUP )+', in the first case
+ GROUP is repeated zero or more times, and in the second GROUP is
+ repeated 1 or more times.
+
+ Neither of those exactly describe what I want, which is GROUP must
+ appear exactly once. I propose to extend 'Notation and Terminology'
+ to include '( GROUP )' which means that GROUP should appear exactly
+ once.
+
+ This change is important because, in a later commit, I want to add
+ additional optional arguments to the -data-disassemble command, and
+ things start to get confusing with the original syntax.
+
+2022-10-02 Andrew Burgess <aburgess@redhat.com>
+
+ gdb: make gdb_disassembly_flag unsigned
+ In a later commit I want to use operator~ on a gdb_disassembly_flag
+ flag value. This is currently not possible as gdb_disassembly_flag
+ is, by default, signed.
+
+ This commit just makes this enum unsigned.
+
+ There should be no user visible changes after this commit.
+
+2022-10-02 Andrew Burgess <aburgess@redhat.com>
+
+ gdb: disassembler opcode display formatting
+ This commit changes the format of 'disassemble /r' to match GNU
+ objdump. Specifically, GDB will now display the instruction bytes in
+ as 'objdump --wide --disassemble' does.
+
+ Here is an example for RISC-V before this patch:
+
+ (gdb) disassemble /r 0x0001018e,0x0001019e
+ Dump of assembler code from 0x1018e to 0x1019e:
+ 0x0001018e <call_me+66>: 03 26 84 fe lw a2,-24(s0)
+ 0x00010192 <call_me+70>: 83 25 c4 fe lw a1,-20(s0)
+ 0x00010196 <call_me+74>: 61 65 lui a0,0x18
+ 0x00010198 <call_me+76>: 13 05 85 6a addi a0,a0,1704
+ 0x0001019c <call_me+80>: f1 22 jal 0x10368 <printf>
+ End of assembler dump.
+
+ And here's an example after this patch:
+
+ (gdb) disassemble /r 0x0001018e,0x0001019e
+ Dump of assembler code from 0x1018e to 0x1019e:
+ 0x0001018e <call_me+66>: fe842603 lw a2,-24(s0)
+ 0x00010192 <call_me+70>: fec42583 lw a1,-20(s0)
+ 0x00010196 <call_me+74>: 6561 lui a0,0x18
+ 0x00010198 <call_me+76>: 6a850513 addi a0,a0,1704
+ 0x0001019c <call_me+80>: 22f1 jal 0x10368 <printf>
+ End of assembler dump.
+
+ There are two differences here. First, the instruction bytes after
+ the patch are grouped based on the size of the instruction, and are
+ byte-swapped to little-endian order.
+
+ Second, after the patch, GDB now uses the bytes-per-line hint from
+ libopcodes to add whitespace padding after the opcode bytes, this
+ means that in most cases the instructions are nicely aligned.
+
+ It is still possible for a very long instruction to intrude into the
+ disassembled text space. The next example is x86-64, before the
+ patch:
+
+ (gdb) disassemble /r main
+ Dump of assembler code for function main:
+ 0x0000000000401106 <+0>: 55 push %rbp
+ 0x0000000000401107 <+1>: 48 89 e5 mov %rsp,%rbp
+ 0x000000000040110a <+4>: c7 87 d8 00 00 00 01 00 00 00 movl $0x1,0xd8(%rdi)
+ 0x0000000000401114 <+14>: b8 00 00 00 00 mov $0x0,%eax
+ 0x0000000000401119 <+19>: 5d pop %rbp
+ 0x000000000040111a <+20>: c3 ret
+ End of assembler dump.
+
+ And after the patch:
+
+ (gdb) disassemble /r main
+ Dump of assembler code for function main:
+ 0x0000000000401106 <+0>: 55 push %rbp
+ 0x0000000000401107 <+1>: 48 89 e5 mov %rsp,%rbp
+ 0x000000000040110a <+4>: c7 87 d8 00 00 00 01 00 00 00 movl $0x1,0xd8(%rdi)
+ 0x0000000000401114 <+14>: b8 00 00 00 00 mov $0x0,%eax
+ 0x0000000000401119 <+19>: 5d pop %rbp
+ 0x000000000040111a <+20>: c3 ret
+ End of assembler dump.
+
+ Most instructions are aligned, except for the very long instruction.
+ Notice too that for x86-64 libopcodes doesn't request that GDB group
+ the instruction bytes. This matches the behaviour of objdump.
+
+ In case the user really wants the old behaviour, I have added a new
+ modifier 'disassemble /b', this displays the instruction byte at a
+ time. For x86-64, which never groups instruction bytes, /b and /r are
+ equivalent, but for RISC-V, using /b gets the old layout back (except
+ that the whitespace for alignment is still present). Consider our
+ original RISC-V example, this time using /b:
+
+ (gdb) disassemble /b 0x0001018e,0x0001019e
+ Dump of assembler code from 0x1018e to 0x1019e:
+ 0x0001018e <call_me+66>: 03 26 84 fe lw a2,-24(s0)
+ 0x00010192 <call_me+70>: 83 25 c4 fe lw a1,-20(s0)
+ 0x00010196 <call_me+74>: 61 65 lui a0,0x18
+ 0x00010198 <call_me+76>: 13 05 85 6a addi a0,a0,1704
+ 0x0001019c <call_me+80>: f1 22 jal 0x10368 <printf>
+ End of assembler dump.
+
+ Obviously, this patch is a potentially significant change to the
+ behaviour or /r. I could have added /b with the new behaviour and
+ left /r alone. However, personally, I feel the new behaviour is
+ significantly better than the old, hence, I made /r be what I consider
+ the "better" behaviour.
+
+ The reason I prefer the new behaviour is that, when I use /r, I almost
+ always want to manually decode the instruction for some reason, and
+ having the bytes displayed in "instruction order" rather than memory
+ order, just makes this easier.
+
+ The 'record instruction-history' command also takes a /r modifier, and
+ has been modified in the same way as disassemble; /r gets the new
+ behaviour, and /b has been added to retain the old behaviour.
+
+ Finally, the MI command -data-disassemble, is unchanged in behaviour,
+ this command now requests the raw bytes of the instruction, which is
+ equivalent to the /b modifier. This means that the MI output will
+ remain backward compatible.
+
+2022-10-02 Andrew Burgess <aburgess@redhat.com>
+
+ gdb/disasm: read opcodes bytes with a single read_code call
+ This commit reduces the number of times we call read_code when
+ printing the instruction opcode bytes during disassembly.
+
+ I've added a new gdb::byte_vector within the
+ gdb_pretty_print_disassembler class, in line with all the other
+ buffers that gdb_pretty_print_disassembler needs. This byte_vector is
+ then resized as needed, and filled with a single read_code call for
+ each instruction.
+
+ There should be no user visible changes after this commit.
+
+2022-10-02 Andrew Burgess <aburgess@redhat.com>
+
+ gdb/testsuite: new test for -data-disassemble opcodes format
+ Add another test for the output of MI command -data-disassemble. The
+ new check validates the format of the 'opcodes' field, specifically,
+ this test checks that the field contains a series of bytes, separated
+ by a single space.
+
+ We also check that the bytes are in the correct order, that is, the
+ first byte is from the lowest address, and subsequent bytes are from
+ increasing addresses.
+
+ The motivation for this test (besides more tests being generally good)
+ is that I plan to make changes to how opcode bytes are displayed in
+ the disassembler output, and I want to ensure that I don't break any
+ existing MI behaviour.
+
+ There should be no user visible changes to GDB after this commit.
+
+2022-10-02 GDB Administrator <gdbadmin@sourceware.org>
+
+ Automatic date update in version.in
+
+2022-10-01 GDB Administrator <gdbadmin@sourceware.org>
+
+ Automatic date update in version.in
+
+2022-09-30 Tsukasa OI <research_trasio@irq.a4lg.com>
+
+ RISC-V: Relax "fmv.[sdq]" requirements
+ This commit relaxes requirements to "fmv.s" instructions from 'F' to ('F'
+ or 'Zfinx'). The same applies to "fmv.d" and "fmv.q". Note that 'Zhinx'
+ extension already contains "fmv.h" instruction (as well as 'Zfh').
+
+ gas/ChangeLog:
+
+ * testsuite/gas/riscv/zfinx.s: Add "fmv.s" instruction.
+ * testsuite/gas/riscv/zfinx.d: Likewise.
+ * testsuite/gas/riscv/zdinx.s: Add "fmv.d" instruction.
+ * testsuite/gas/riscv/zdinx.d: Likewise.
+ * testsuite/gas/riscv/zqinx.d: Add "fmv.q" instruction.
+ * testsuite/gas/riscv/zqinx.s: Likewise.
+
+ opcodes/ChangeLog:
+
+ * riscv-opc.c (riscv_opcodes): Relax requirements to "fmv.[sdq]"
+ instructions to support those in 'Zfinx'/'Zdinx'/'Zqinx'.
+
+2022-09-30 Tsukasa OI <research_trasio@irq.a4lg.com>
+
+ RISC-V: Reorganize and enhance 'Zfinx' tests
+ This commit adds certain test cases for 'Zfinx'/'Zdinx'/'Zqinx' extensions
+ and reorganizes them, fixing coding style while improving coverage.
+ This is partially based on jiawei's 'Zhinx' testcases.
+
+ gas/ChangeLog:
+
+ * testsuite/gas/riscv/zfinx.s: Use different registers for
+ better encode space testing. Make indentation consistent.
+ Add tests for instruction with rounding mode. Change march
+ to minimum required extensions. Remove source line.
+ * testsuite/gas/riscv/zfinx.d: Likewise.
+ * testsuite/gas/riscv/zdinx.s: Likewise.
+ * testsuite/gas/riscv/zdinx.d: Likewise.
+ * testsuite/gas/riscv/zqinx.s: Likewise.
+ Also use even-numbered registers to use valid register pairs.
+ * testsuite/gas/riscv/zqinx.d: Likewise.
+
+2022-09-30 Christoph Müllner <christoph.muellner@vrull.eu>
+
+ RISC-V: Eliminate long-casts of X_add_number in diagnostics
+ There is no need for casts to (signed/unsigned) long, as we can use
+ C99's PRId64/PRIu64 format specifiers.
+
+2022-09-30 Jan Beulich <jbeulich@suse.com>
+
+ RISC-V: fallout from "re-arrange opcode table for consistent alias handling"
+ Several new testcasee have appeared since the submission of said change,
+ some of which now also need adjustment.
+
+ RISC-V: fix build after "Add support for arbitrary immediate encoding formats"
+ Pre- and post-increment/decrement are side effects, the behavior of
+ which is undefined when combined with passing an address of the accessed
+ variable in the same function invocation. There's no need for the
+ increments here - simply adding 1 achieves the intended effect without
+ triggering compiler diagnostics (which are fatal with -Werror).
+
+ objcopy: avoid "shadowing" of remove() function name
+ remove() is a standard library function (declared in stdio.h), which
+ triggers a "shadows a global declaration" warning with some gcc versions.
+
+ RISC-V: drop stray INSN_ALIAS flags
+ FENCE.TSO isn't an alias. ZIP and UNZIP in the long run likely are, but
+ presently they aren't. This fixes disassembly of these insns with
+ -Mno-aliases.
+
+2022-09-30 Jan Beulich <jbeulich@suse.com>
+
+ RISC-V: re-arrange opcode table for consistent alias handling
+ For disassembly to pick up aliases in favor of underlying insns (helping
+ readability in the common case), the aliases need to come ahead of the
+ "base" insns. Slightly more code movement is needed because of insns
+ with the same name needing to stay next to each other.
+
+ Note that the "rorw" alias entry also has the missing INSN_ALIAS added
+ here.
+
+ Clone a few testcases to exercise -Mno-aliases some more, better
+ covering the differences between the default and that disassembly mode.
+
+2022-09-30 Jan Beulich <jbeulich@suse.com>
+
+ x86: correct build dependencies in opcodes/
+ With the command in the rule merely being "echo", i386-tbl.h won't be
+ rebuilt if missing, when at the same time i386-init.h is present and
+ up-to-date. Use a pattern rule instead to express the multiple targets
+ correctly (the &: rule separator is supported only by GNU make 4.3 and
+ newer). Note that now, for the opposite case to work (i386-tbl.h is
+ up-to-date but i386-init.h is missing), i386-init.h also needs
+ mentioning as a dependency somewhere: Add a fake dependency for
+ i386-opc.lo ("fake" because i386-opc.c doesn't include that header).
+
+ At the same time use $(AM_V_GEN) in the actual rule, replacing the
+ earlier (open-coded) "echo". And while there also drop a duplicate
+ dependency of i386-gen.o on i386-opc.h.
+
+2022-09-30 Jan Beulich <jbeulich@suse.com>
+
+ x86: improve match_template()'s diagnostics
+ At the example of
+
+ extractps $0, %xmm0, %xmm0
+ insertps $0, %xmm0, %eax
+
+ (both having respectively the same mistake of using the wrong kind of
+ destination register) it is easy to see that current behavior is far
+ from ideal: The former results in "unsupported instruction" for 32-bit
+ code simply because the 2nd template we have is a Cpu64 one. Instead we
+ should aim at emitting the "best" possible error, which will typically
+ be the one where we passed the largest number of checks. Generalize the
+ original "specific_error" approach by making it apply to the entire
+ matching loop, utilizing that line numbers increase as we pass further
+ checks.
+
+2022-09-30 Jan Beulich <jbeulich@suse.com>
+
+ x86/Intel: restrict suffix derivation
+ While in some cases deriving an AT&T-style suffix from an Intel syntax
+ memory operand size specifier is necessary, in many cases this is not
+ only pointless, but has led to the introduction of various workarounds:
+ Excessive use of IgnoreSize and NoRex64 as well as the ToDword and
+ ToQword attributes. Suppress suffix derivation when we can clearly tell
+ that the memory operand's size isn't going to be needed to infer the
+ possible need for the low byte/word opcode bit or an operand size prefix
+ (0x66 or REX.W).
+
+ As a result ToDword and ToQword can be dropped entirely, plus a fair
+ number of IgnoreSize and NoRex64 can also be got rid of. Note that
+ IgnoreSize needs to remain on legacy encoded SIMD insns with GPR
+ operand, to avoid emitting an operand size prefix in 16-bit mode. (Since
+ 16-bit code using SIMD insns isn't well tested, clone an existing
+ testcase just enough to cover a few insns which are potentially
+ problematic but are being touched here.)
+
+ Note that while folding the VCVT{,T}S{S,D}2SI templates, VCVT{,T}SH2SI
+ isn't included there. This is to fulfill the request of not allowing L
+ and Q suffixes there, despite the inconsistency with VCVT{,T}S{S,D}2SI.
+
+2022-09-30 liuzhensong <liuzhensong@loongson.cn>
+
+ LoongArch: Update ELF e_flags handling according to specification.
+ Update handling of e_flags according to the documentation
+ update [1] (discussions [2][3]).
+
+ Object file bitness is now represented in the EI_CLASS byte.
+ The e_flags field is now interpreted as follows:
+
+ e_flags[2:0]: Base ABI modifier
+
+ - 0x1: soft-float
+ - 0x2: single-precision hard-float
+ - 0x3: double-precision hard-float
+
+ e_flags[7:6]: ELF object ABI version
+
+ - 0x0: v0
+ - 0x1: v1
+
+ [1]: https://github.com/loongson/LoongArch-Documentation/blob/main/docs/LoongArch-ELF-ABI-EN.adoc#e_flags-identifies-abi-type-and-version
+ [2]: https://github.com/loongson/LoongArch-Documentation/pull/61
+ [3]: https://github.com/loongson/LoongArch-Documentation/pull/47
+
+2022-09-30 Vladimir Mezentsev <vladimir.mezentsev@oracle.com>
+
+ gprofng: fix cppcheck warnings
+ gprofng/ChangeLog
+ 2022-09-29 Vladimir Mezentsev <vladimir.mezentsev@oracle.com>
+
+ * common/hwcdrv.c: Fix cppcheck warning.
+ * src/ABS.h: Likewise.
+ * src/CompCom.cc: Likewise.
+
+2022-09-30 Tom de Vries <tdevries@suse.de>
+
+ [gdb/testsuite] Fix gdb.mi/mi-sym-info.exp on openSUSE Tumbleweed
+ On openSUSE Tumbleweed, I run into:
+ ...
+ FAIL: gdb.mi/mi-sym-info.exp: List all functions from debug information only
+ ...
+
+ The problem is in matching this string:
+ ...
+ {name="_start",type="void (void)",description="void _start(void);"}
+ ...
+ using regexp fun_re, which requires a line field:
+ ...
+ set fun_re \
+ "\{line=\"$decimal\",name=${qstr},type=${qstr},description=${qstr}\}"
+ ...
+
+ Fix this by making the line field optional in fun_re.
+
+ Tested on x86_64-linux.
+
+2022-09-30 Tsukasa OI <research_trasio@irq.a4lg.com>
+
+ RISC-V: Add privileged extensions without instructions/CSRs
+ Currently, GNU Binutils does not support following privileged extensions:
+
+ - 'Smepmp'
+ - 'Svnapot'
+ - 'Svpbmt'
+
+ as they do not provide new CSRs or new instructions ('Smepmp' extends the
+ privileged architecture CSRs but does not define the CSR itself). However,
+ adding them might be useful as we no longer have to "filter" ISA strings
+ just for toolchains (if full ISA string is given by a vendor, we can
+ straightly use it).
+
+ And there's a fact that supports this theory: there's already an
+ (unprivileged) extension which does not provide CSRs or instructions (but
+ only an architectural guarantee): 'Zkt' (constant timing guarantee for
+ certain subset of RISC-V instructions).
+
+ This simple commit simply adds three privileged extensions listed above.
+
+ bfd/ChangeLog:
+
+ * elfxx-riscv.c (riscv_supported_std_s_ext): Add 'Smepmp',
+ 'Svnapot' and 'Svpbmt' extensions.
+
+2022-09-30 Tsukasa OI <research_trasio@irq.a4lg.com>
+
+ gdb: Remove unused extra_lines variable
+ Clang generates a warning if there is a variable that is set but not used
+ otherwise ("-Wunused-but-set-variable"). On the default configuration, it
+ causes a build failure (unless "--disable-werror" is specified).
+
+ The only extra_lines use in arrange_linetable function is removed on the
+ commit 558802e4d1c5dcbd0df7d2c6ef62a6deac247a2f
+ ("gdb: change subfile::line_vector to an std::vector"). So, this variable
+ should be removed to prevent a build failure.
+
+2022-09-30 Tom de Vries <tdevries@suse.de>
+
+ [gdb/testsuite] Add aranges to gdb.dwarf2/dw2-dir-file-name.exp
+ Since commit 52b920c5d20 ("[gdb/testsuite] Fix gdb.dwarf2/dw2-dir-file-name.exp
+ for ppc64le"), the test-case fails with target board cc-with-debug-names, due
+ to missing .debug_aranges info.
+
+ Add the missing .debug_aranges info.
+
+ Also add a file_id option to Dwarf::assemble, to make it possible to contribute
+ to an already open file.
+
+ Tested on x86_64-linux.
+
+2022-09-30 Tom de Vries <tdevries@suse.de>
+
+ [gdb/c++] Print destructor the same for gcc and clang
+ Consider the test-case contained in this patch.
+
+ With g++ (7.5.0) we have for "ptype A":
+ ...
+ type = class A {
+ public:
+ int a;
+
+ A(void);
+ ~A();
+ }
+ ...
+ and with clang++ (13.0.1):
+ ...
+ type = class A {
+ public:
+ int a;
+
+ A(void);
+ ~A(void);
+ }
+ ...
+ and we observe that the destructor is printed differently.
+
+ There's a difference in debug info between the two cases: in the clang case,
+ there's one artificial parameter, but in the g++ case, there are two, and
+ these similar cases are handled differently in cp_type_print_method_args.
+
+ This is due to this slightly convoluted bit of code:
+ ...
+ i = staticp ? 0 : 1;
+ if (nargs > i)
+ {
+ while (i < nargs)
+ ...
+ }
+ else if (varargs)
+ gdb_printf (stream, "...");
+ else if (language == language_cplus)
+ gdb_printf (stream, "void");
+ ...
+
+ The purpose of "i = staticp ? 0 : 1" is to skip the printing of the implicit
+ this parameter.
+
+ In commit 5f4d1085085 ("c++/8218: Destructors w/arguments"), skipping of other
+ artificial parameters was added, but using a different method: rather than
+ adjusting the potential loop start, it skips the parameter in the loop.
+
+ The observed difference in printing is explained by whether we enter the loop:
+ - in the clang case, the loop is not entered and we print "void".
+ - in the gcc case, the loop is entered, and nothing is printed.
+
+ Fix this by rewriting the code to:
+ - always enter the loop
+ - handle whether arguments need printing in the loop
+ - keep track of how many arguments are printed, and
+ use that after the loop to print void etc.
+ such that we have the same for both gcc and clang:
+ ...
+ A(void);
+ ~A(void);
+ ...
+
+ Note that I consider the discussion of whether we want to print:
+ - A(void) / ~A(void), or
+ - A() / ~A()
+ out-of-scope for this patch.
+
+ Tested on x86_64-linux.
+
+2022-09-30 Alan Modra <amodra@gmail.com>
+
+ PR29626, Segfault when disassembling ARM code
+ PR 29626
+ * arm-dis.c (mapping_symbol_for_insn): Return false on zero
+ symtab_size. Delete later symtab_size test.
+
+2022-09-30 GDB Administrator <gdbadmin@sourceware.org>
+
+ Automatic date update in version.in
+
+2022-09-29 Simon Marchi <simon.marchi@polymtl.ca>
+
+ gdb: make target_auxv_parse static and rename
+ It is only used in auxv.c. Also, given it is not strictly a wrapper
+ around target_ops::auxv (since 27a48a9223d0 "Add auxv parsing to the
+ architecture vector."), I think that the name prefixed with target is a
+ bit misleading. Rename to just parse_auxv.
+
+ Change-Id: I41cca055b92c8ede37c258ba6583746a07d8f77e
+
+2022-09-29 Simon Marchi <simon.marchi@polymtl.ca>
+
+ gdb: make fprint_target_auxv static
+ It's only used in auxv.c.
+
+ Change-Id: I4992d9aae37b6631a074ab99bbab2f619725b642
+
+2022-09-29 Simon Marchi <simon.marchi@polymtl.ca>
+
+ gdb: constify auxv parse functions
+ Constify the input parameters of the various auxv parse functions, they
+ don't need to modify the raw auxv data.
+
+ Change-Id: I13eacd5ab8e925ec2b5c1f7722cbab39c41516ec
+
+2022-09-29 Simon Marchi <simon.marchi@polymtl.ca>
+
+ gdb: constify target_stack::is_pushed
+ The target_ops parameters here can be made const.
+
+ Change-Id: Ibc18b17d6b21d06145251a03e68aca90538117d6
+
+2022-09-29 Keith Seitz <keiths@redhat.com>
+
+ Constify target_desc declarations
+ This patch changes various global target_desc declarations to const, thereby
+ correcting a prominent source of ODR violations in PowerPC-related target code.
+ The majority of files/changes are mechanical const-ifications accomplished by
+ regenerating the C files in features/.
+
+ This also required manually updating mips-linux-tdep.h, s390-linux-tdep.h,
+ nios2-tdep.h, s390-tdep.h, arch/ppc-linux-tdesc.h, arch/ppc-linux-common.c,
+ and rs6000-tdep.c.
+
+ Patch tested against the sourceware trybot, and fully regression tested against
+ our (Red Hat's) internal test infrastructure on Rawhide aarch64, s390x, x86_64,
+ and powerpcle.
+
+ With this patch, I can finally enable LTO in our GDB package builds. [Tested
+ with a rawhide scratch build containing this patch.]
+
+ Bug: https://sourceware.org/bugzilla/show_bug.cgi?id=22395
+ Bug: https://sourceware.org/bugzilla/show_bug.cgi?id=24835
+
+2022-09-29 Keith Seitz <keiths@redhat.com>
+
+ cleanup: Add missing feature/ XML files to Makefile
+ This patch adds some missing .xml files to features/Makefile so that when the
+ directory's C files are regenerated, all files are appropriately remade.
+
+ This has demonstrated that there have been several "misses" in regenerating
+ files in this directory. Namely, arm-secext.c and sparc{32,64}-solaris.c. For
+ the former case, there was what essentially amounts to a typo regarding the
+ create feature function's name. In the later case, this file has missed at least
+ one important update in July, 2020, when allocate_target_description was
+ changed to return a unique pointer.
+
+ Those corrections are included.
+
+2022-09-29 Nick Clifton <nickc@redhat.com>
+
+ Add -B to the help output from gprof, and add suitable documentation.
+ PR 29627
+ * gprof.c (usage): Add -B.
+ * gprof.texi (synopsis): Add -B.
+ (Output Options): Add entry for -B.
+
+2022-09-29 GDB Administrator <gdbadmin@sourceware.org>
+
+ Automatic date update in version.in
+
+2022-09-28 Pedro Alves <pedro@palves.net>
+
+ Fix GDB build: ELF support check & -lzstd
+ GDB fails to build for me, on Ubuntu 20.04. I get:
+
+ ...
+ CXXLD gdb
+ /usr/bin/ld: linux-tdep.o: in function `linux_corefile_thread(thread_info*, linux_corefile_thread_data*)':
+ /home/pedro/gdb/binutils-gdb/src/gdb/linux-tdep.c:1831: undefined reference to `gcore_elf_build_thread_register_notes(gdbarch*, thread_info*, gdb_signal, bfd*, std::unique_ptr<char, gdb::xfree_deleter<char> >*, int*)'
+ /usr/bin/ld: linux-tdep.o: in function `linux_make_corefile_notes(gdbarch*, bfd*, int*)':
+ /home/pedro/gdb/binutils-gdb/src/gdb/linux-tdep.c:2117: undefined reference to `gcore_elf_make_tdesc_note(bfd*, std::unique_ptr<char, gdb::xfree_deleter<char> >*, int*)'
+ collect2: error: ld returned 1 exit status
+ make[2]: *** [Makefile:2149: gdb] Error 1
+ make[2]: Leaving directory '/home/pedro/gdb/binutils-gdb/build/gdb'
+ make[1]: *** [Makefile:11847: all-gdb] Error 2
+ make[1]: Leaving directory '/home/pedro/gdb/binutils-gdb/build'
+ make: *** [Makefile:1004: all] Error 2
+
+ Those undefined functions exist in gdb/gcore-elf.c, which is only
+ included in the build if GDB's configure thinks that the target you're
+ configuring for is an ELF target. GDB's configure thinks my system
+ isn't ELF, which is incorrect.
+
+ For the ELF support check, gdb/config.log shows:
+
+ configure:17387: checking for ELF support in BFD
+ configure:17407: gcc -o conftest -I/home/pedro/gdb/binutils-gdb/src/gdb/../include -I../bfd -I/home/pedro/gdb/binutils-gdb/src/gdb/../bfd -g3 -O0 -L../bfd -L../libiberty -lzstd conftest.c -lbfd -liberty -lz -lncursesw -lm -ldl >&5
+ /usr/bin/ld: ../bfd/libbfd.a(compress.o): in function `decompress_contents':
+ /home/pedro/gdb/binutils-gdb/src/bfd/compress.c:42: undefined reference to `ZSTD_decompress'
+ /usr/bin/ld: /home/pedro/gdb/binutils-gdb/src/bfd/compress.c:44: undefined reference to `ZSTD_isError'
+ /usr/bin/ld: ../bfd/libbfd.a(compress.o): in function `bfd_compress_section_contents':
+ /home/pedro/gdb/binutils-gdb/src/bfd/compress.c:195: undefined reference to `ZSTD_compress'
+ /usr/bin/ld: /home/pedro/gdb/binutils-gdb/src/bfd/compress.c:198: undefined reference to `ZSTD_isError'
+ collect2: error: ld returned 1 exit status
+ configure:17407: $? = 1
+ ...
+ configure:17417: result: no
+
+ Note how above, in the gcc command line, "-lzstd" appears before
+ "-lbfd". That explain the link failure. It should appear after, like
+ -lz does.
+
+ This commit fixes it, by moving ZSTD_LIBS from LDFLAGS to LIBS, next
+ to -lz, in GDB_AC_CHECK_BFD, and regenerating gdb/configure.
+
+ Bug: https://sourceware.org/bugzilla/show_bug.cgi?id=29630
+ Change-Id: I1f4128dde634e8ea04c9002904f1005a8b3a6863
+
+2022-09-28 Simon Marchi <simon.marchi@efficios.com>
+
+ gdb: remove trailing spaces in README
+ Change-Id: Ic7f8e415acd1bff6194cf08ed646bff45571f165
+
+2022-09-28 Tom Tromey <tromey@adacore.com>
+
+ Treat Character as a discrete type in Ada
+ A user noticed that gdb would assert when printing a certain array
+ with array-indexes enabled. This turned out to be caused by the array
+ having an index type of Character, which is completely valid in Ada.
+ This patch changes the Ada support to recognize Character as a
+ discrete type, and adds some tests.
+
+ Because this is Ada-specific and was also reviewed internally, I am
+ checking it in.
+
+2022-09-28 Nick Clifton <nickc@redhat.com>
+
+ The help document of size misses an option.
+ PR 29628
+ * size.c (usage): Add -f.
+ * doc/binutils.texi (size): Add -f.
+
+2022-09-28 Clément Chigot <chigot@adacore.com>
+
+ ld/testsuite: force warnings when dealing with execstack tests
+ Binutils can be configured to avoid printing the execstack or RWD
+ segment warnings. In this case, the first test of PR ld/29072 will fail.
+ Fix that by always manually forcing the warnings for it.
+
+ ld/ChangeLog:
+
+ * testsuite/ld-elf/elf.exp (PR ld/29072): Force execstack and
+ RWD segment warnings.
+
+2022-09-28 Alan Modra <amodra@gmail.com>
+
+ Re: egrep in binutils
+ Multi-line patterns for grep are not supported on some old versions
+ of grep.
+
+ binutils/
+ * embedspu.sh: Replace multi-line grep with sed.
+ ld/
+ * testsuite/ld-elfvers/vers.exp: Replace multi-line grep with sed.
+
+2022-09-28 Pedro Alves <pedro@palves.net>
+
+ Renenerate {gdb,gdbserver}/configure
+ Pick up config/lib-ld.m4 changes from:
+
+ commit 67d1991b785bdfef1d70cddfa0202b99b43ccce9
+ Author: Alan Modra <amodra@gmail.com>
+ AuthorDate: Wed Sep 28 13:37:31 2022 +0930
+ Commit: Alan Modra <amodra@gmail.com>
+ CommitDate: Wed Sep 28 13:37:31 2022 +0930
+
+ egrep in binutils
+
+ Change-Id: Ifc84d30f1fca015e80bafa80f9a35616b0077220
+
+2022-09-28 Nick Clifton <nickc@redhat.com>
+
+ The help document of as misses some many options
+ PR 29623
+ * as.c (show_usage): Document the --dump-config,
+ --gdwarf-cie-version, --hash-size, --multibyte-handling,
+ and --reduce-memory-overheads options.
+ * config/tc-i386.c (md_show_usage): Document the -O option.
+ * doc/as.texi: Document the --dump-config, --emulation,
+ --hash-size, and --reduce-memory-overheads options.
+
+2022-09-28 Alan Modra <amodra@gmail.com>
+
+ egrep in binutils
+ Apparently some distros have a nagging egrep that helpfully tells you
+ egrep is deprecated and to use "grep -E". The nag message causes a ld
+ testsuite failure. What's more the advice isn't that good. The "-E"
+ flag may not be available with older versions of grep.
+
+ This patch fixes bare invocation of egrep within binutils, replacing
+ it with the autoconf $EGREP or with grep.
+
+ config/
+ * lib-ld.m4 (AC_LIB_PROG_LD_GNU): Require AC_PROG_EGREP and
+ invoke $EGREP.
+ (AC_LIB_PROG_LD): Likewise.
+ binutils/
+ * configure: Regenerate.
+ * embedspu.sh: Replace egrep with grep.
+ gold/
+ * testsuite/Makefile.am (flagstest_compress_debug_sections.check):
+ Replace egrep with grep.
+ * testsuite/Makefile.in: Regenerate.
+ * testsuite/bnd_ifunc_1.sh: Replace egrep with $EGREP.
+ * testsuite/bnd_ifunc_2.sh: Likewise.
+ * testsuite/bnd_plt_1.sh: Likewise.
+ * testsuite/discard_locals_test.sh: Likewise.
+ * testsuite/gnu_property_test.sh: Likewise.
+ * testsuite/no_version_test.sh: Likewise.
+ * testsuite/pr18689.sh: Likewise.
+ * testsuite/pr26936.sh: Likewise.
+ * testsuite/retain.sh: Likewise.
+ * testsuite/split_i386.sh: Likewise.
+ * testsuite/split_s390.sh: Likewise.
+ * testsuite/split_x32.sh: Likewise.
+ * testsuite/split_x86_64.sh: Likewise.
+ * testsuite/ver_test_pr16504.sh: Likewise.
+ intl/
+ * configure: Regenerate.
+ ld/
+ * testsuite/ld-elfvers/vers.exp (test_ar): Replace egrep with grep.
+
+2022-09-28 Alan Modra <amodra@gmail.com>
+
+ regen bfd/configure
+
+2022-09-28 Alan Modra <amodra@gmail.com>
+
+ asan: _bfd_stab_section_find_nearest_line segv
+ The segv was on "info->strs[strsize - 1] = 0;" with strsize zero. OK,
+ if strsize is zero we don't have any filenames in stabs so no useful
+ info.
+
+ * syms.c (_bfd_stab_section_find_nearest_line): Exit if either
+ stabsize or strsize is zero.
+
+2022-09-28 Alan Modra <amodra@gmail.com>
+
+ asan: segv in _bfd_archive_close_and_cleanup
+ Uninitialised arelt_data->parent_cache led to this segv.
+
+ * pdb.c (pdb_get_elt_at_index): Clear arelt_data.
+
+2022-09-28 GDB Administrator <gdbadmin@sourceware.org>
+
+ Automatic date update in version.in
+
+2022-09-27 Fangrui Song <maskray@google.com>
+
+ sim: Link ZSTD_LIBS
+ This fixes linker errors in a `../../configure --enable-targets
+ --enable-sim; make all-gdb` build.
+
+2022-09-27 Tsukasa OI <research_trasio@irq.a4lg.com>
+
+ gold: Suppress "unused" variable warning on Clang
+ Clang generates a warning if there is a variable that is set but not used
+ otherwise ("-Wunused-but-set-variable"). On the default configuration, it
+ causes a build failure (unless "--disable-werror" is specified).
+
+ Because the cause of this error is in the Bison-generated code
+ ($(srcdir)/gold/yyscript.y -> $(builddir)/gold/yyscript.c),
+ this commit suppresses this warning ("-Wunused-but-set-variable") by placing
+ DIAGNOSTIC_IGNORE_UNUSED_BUT_SET_VARIABLE macro at the end of user
+ prologue on yyscript.y.
+
+ * yyscript.y: Suppress -Wunused-but-set-variable warning on
+ the Bison-generated code.
+
+2022-09-27 Fangrui Song <i@maskray.me>
+
+ libctf: Add ZSTD_LIBS to LIBS so that ac_cv_libctf_bfd_elf can be true
+
+2022-09-27 Fangrui Song <maskray@google.com>
+
+ binutils, gdb: support zstd compressed debug sections
+ PR29397 PR29563: Add new configure option --with-zstd which defaults to
+ auto. If pkgconfig/libzstd.pc is found, define HAVE_ZSTD and support
+ zstd compressed debug sections for most tools.
+
+ * bfd: for addr2line, objdump --dwarf, gdb, etc
+ * gas: support --compress-debug-sections=zstd
+ * ld: support ELFCOMPRESS_ZSTD input and --compress-debug-sections=zstd
+ * objcopy: support ELFCOMPRESS_ZSTD input for
+ --decompress-debug-sections and --compress-debug-sections=zstd
+ * gdb: support ELFCOMPRESS_ZSTD input. The bfd change references zstd
+ symbols, so gdb has to link against -lzstd in this patch.
+
+ If zstd is not supported, ELFCOMPRESS_ZSTD input triggers an error. We
+ can avoid HAVE_ZSTD if binutils-gdb imports zstd/ like zlib/, but this
+ is too heavyweight, so don't do it for now.
+
+ ```
+ % ld/ld-new a.o
+ ld/ld-new: a.o: section .debug_abbrev is compressed with zstd, but BFD is not built with zstd support
+ ...
+
+ % ld/ld-new a.o --compress-debug-sections=zstd
+ ld/ld-new: --compress-debug-sections=zstd: ld is not built with zstd support
+
+ % binutils/objcopy --compress-debug-sections=zstd a.o b.o
+ binutils/objcopy: --compress-debug-sections=zstd: binutils is not built with zstd support
+
+ % binutils/objcopy b.o --decompress-debug-sections
+ binutils/objcopy: zstd.o: section .debug_abbrev is compressed with zstd, but BFD is not built with zstd support
+ ...
+ ```
+
+2022-09-27 Alan Modra <amodra@gmail.com>
+
+ PR29617, ld segfaults when bfd_close fails
+ PR 29617
+ * ldmain.c (main): Don't access output_bfd after bfd_close.
+
+2022-09-27 GDB Administrator <gdbadmin@sourceware.org>
+
+ Automatic date update in version.in
+
+2022-09-26 Simon Marchi <simon.marchi@polymtl.ca>
+
+ gdb/testsuite: update field names in gdb-gdb.py.in
+ Patches that renamed the type::length and type::target_type fields
+ didn't update gdb-gdb.py.in accordingly, do that.
+
+ Bug: https://sourceware.org/bugzilla/show_bug.cgi?id=29599
+ Change-Id: I0f3f37a94d43497789156b0ded4d2f2dd5b89496
+
+2022-09-26 Simon Marchi <simon.marchi@polymtl.ca>
+
+ gdb/testsuite: use gdb_test in gdb.gdb/python-helper.exp
+ If some command in there gives the wrong answer, we currently have to
+ wait for a timeout for the test to continue. For instance, I currently
+ see:
+
+ print *val->type
+ $1 = Python Exception <class 'gdb.error'>: Cannot take address of method length.
+
+ (outer-gdb) FAIL: gdb.gdb/python-helper.exp: pretty print type (timeout)
+
+ We can avoid this and modernize the test at the same time by using the
+ -prompt option of gdb_test.
+
+ gdb_test_no_output currently accepts a -prompt_re option (the variable
+ name passed to parse_args defines the option name), but I think
+ it's a typo. It's supposed to be -prompt, like gdb_test. I can't find
+ anything using -prompt_re using grep. Change it to just "prompt".
+
+ Change-Id: Icc0a9a0ef482e62460c708bccdd544c11d711eca
+
+2022-09-26 Simon Marchi <simon.marchi@polymtl.ca>
+
+ gdb/testsuite: bump duration for the whole test in do_self_tests
+ When running gdb.gdb/python-helper.exp, I get some timeouts:
+
+ continue
+ Continuing.
+ print 1
+
+ FAIL: gdb.gdb/python-helper.exp: hit breakpoint in outer gdb (timeout)
+
+ At this time, GDB is actually processing the stop and reading in some
+ CUs. selftest_setup does bump the timeout, but it's not for the whole
+ test.
+
+ Since debugging GDB with GDB is (unfortunately) a bit slow, bump the
+ timeout for the whole duration of the setup and body. On my optimized
+ build, the command takes just a bit more than the current timeout of 10
+ seconds. But it's much slower if running the test on an unoptimized
+ build, so I think it's necessary to bump the timeout for that in any
+ case.
+
+ Change-Id: I4d38285870e76c94f9d0bfdb60648a2e7f2cfa5d
+
+2022-09-26 Clément Chigot <chigot@adacore.com>
+
+ binutils/testsuite: handle the different install names of c++filt
+ c++filt is always named cxxfilt in a build directory, but in a install
+ directory it would be named either cxxfilt or c++filt (depending on
+ the host). Handle this last case in testsuite.
+
+ binutils/ChangeLog:
+ * testsuite/config/default.exp (CXXFILE): if cxxfilt not found,
+ try c++filt.
+
+2022-09-26 Clément Chigot <chigot@adacore.com>
+
+ binutils/testsuite: skip gentestdlls related tests if missing
+ When launching the testsuite through runtest outside the build tree,
+ gentestdlls might not be available, this binary being created by make
+ check.
+ Simply untested the related tests instead of crashing.
+
+ binutils/ChangeLog:
+
+ * testsuite/binutils-all/objdump.exp: Skip dotnet tests if
+ gentestdlls is not available.
+
+2022-09-26 Tom de Vries <tdevries@suse.de>
+
+ [gdb/testsuite] Fix gdb.dwarf2/dw2-unspecified-type-foo.c with -m32
+ When running test-case gdb.dwarf2/dw2-unspecified-type-foo.c with target board
+ unix/-m32, I run into:
+ ...
+ (gdb) PASS: gdb.dwarf2/dw2-unspecified-type.exp: ptype foo
+ p ((int (*) ()) foo) ()^M
+ $1 = -135698472^M
+ ...
+
+ Add the missing "return 0" in foo, which fixes this.
+
+ Tested on x86_64-linux.
+
+2022-09-26 Alan Modra <amodra@gmail.com>
+
+ PR29613, use of uninitialized value in objcopy
+ PR 29613
+ * elf.c (_bfd_elf_write_secondary_reloc_section): Trim sh_size
+ back to relocs written. Use better types for vars.
+
+2022-09-26 Alan Modra <amodra@gmail.com>
+
+ PR29542, PowerPC gold internal error in get_output_view,
+ We were attempting to set a BSS style section contents.
+
+ PR 29542
+ * powerpc.cc (Output_data_plt_powerpc::do_write): Don't set .plt,
+ .iplt or .lplt section contents when position independent.
+
+2022-09-26 Alan Modra <amodra@gmail.com>
+
+ stab nearest_line bfd_malloc_and_get_section
+ bfd_malloc_and_get_section performs some sanity checks on the section
+ size before allocating memory. This patch avails the stab
+ nearest_line code of that sanity checking, and tidies up memory
+ afterward.
+
+ * coffgen.c (_bfd_coff_close_and_cleanup): Call _bfd_stab_cleanup.
+ * elf.c (_bfd_elf_close_and_cleanup): Likewise.
+ * syms.c (_bfd_stab_section_find_nearest_line): Set *pinfo earlier.
+ Use bfd_malloc_and_get_section. Free malloc'd buffers on failure.
+ Malloc indextable.
+ (_bfd_stab_cleanup): New function.
+ * libbfd-in.h (_bfd_stab_cleanup): Declare.
+ * libbfd.h: Regnerate.
+
+2022-09-26 Alan Modra <amodra@gmail.com>
+
+ PKG_CHECK_MODULES for msgpack and jansson
+ Using AS_IF rather than shell "if" is recommended for conditionals
+ that contain non-trivial autoconf macros, because autoconf will emit
+ any AC_REQUIREd autoconf macro expansions outside of the conditional.
+ This makes them available elsewhere in the configure script.
+
+ binutils/
+ * configure.ac (msgpack): Use "AS_IF" rather than "if".
+ * configure: Regenerate.
+ ld/
+ * configure.ac (jansson): Use "AS_IF" rather than "if".
+ * configure: Regenerate.
+
+2022-09-26 GDB Administrator <gdbadmin@sourceware.org>
+
+ Automatic date update in version.in
+
+2022-09-25 GDB Administrator <gdbadmin@sourceware.org>
+
+ Automatic date update in version.in
+
+2022-09-24 Magne Hov <mhov@undo.io>
+
+ gdb/source.c: Fix undefined behaviour dereferencing empty string
+ When a source file's dirname is solely made up of directory separators
+ we end up trying to dereference the last character of an empty string
+ with std::string::back, which results in undefined behaviour. A typical
+ use case where this can happen is when the root directory "/" is used as
+ a compilation directory.
+
+ With libstdc++.so.6.0.28 we get no out-of-bounds checks and the byte
+ preceding the storage of the empty string is returned. The character
+ value of this byte depends on heap implementation and usage, but when
+ this byte happens to hold the value of the directory separator character
+ we go on to call std::string::pop_back on the empty string which results
+ in an out_of_range exception which terminates GDB.
+
+ Fix this by using path_join. prepare_path_for_appending ensures that the
+ filename component is relative.
+
+ The testsuite has been run before and after the change and no
+ regressions were found.
+
+2022-09-24 Enze Li <enze.li@hotmail.com>
+
+ gdbserver: remove unused for loop
+ In this commit,
+
+ commit cf6c1e710ee162a5adb0ae47acb731f2bfecc956
+ Date: Mon Jul 11 20:53:48 2022 +0800
+
+ gdbserver: remove unused variable
+
+ I removed an unused variable in handle_v_run. Pedro then pointed out
+ that the for loop after it was also unused. After a period of smoke
+ testing, no exceptions were found.
+
+ Tested on x86_64-linux.
+
+2022-09-24 Alan Modra <amodra@gmail.com>
+
+ The problem with warning in elf_object_p
+ elfcode.h can emit three warnings in elf_object_p for various things,
+ "section extending past end of file", "corrupt string table index",
+ and "program header with invalid alignment". The problem with doing
+ this is that the warning can be emitted for multiple possible targets
+ as each one is tried. I was looking at a fuzzer testcase that had an
+ object file with 6144 program headers, 5316 of which had invalid
+ alignment. It would be bad enough to get 5316 messages all the same,
+ but this object was contained in an archive and resulted in 4975776
+ repeats.
+
+ Some trimming can be done by not warning if the bfd is already marked
+ read_only, as is done for the "section extending past end of file"
+ warning, but that still results in an unacceptable number of
+ warnings for object files in archives. Besides that, it is just wrong
+ to warn about a problem detected by a target elf_object_p other than
+ the one that actually matches. At some point we might have more
+ target specific warnings.
+
+ So what to do? One obvious solution is to remove the warnings.
+ Another is to poke any warning strings into the target xvec, emitting
+ them if that xvec is the final one chosen. This also has the benefit
+ of solving the archive problem. A warning when recursing into
+ _bfd_check_format for the first element of the archive (to find the
+ correct target for the archive) will still be on the xvec at the point
+ that target is chosen for the archive. However, target xvecs are
+ read-only. Thus the need for per_xvec_warn to logically extend
+ bfd_target with a writable field. I've made per_xvec_warn one larger
+ than bfd_target_vector to provide one place for user code that makes
+ private copies of target xvecs.
+
+ * elfcode.h (elf_swap_shdr_in, elf_object_p): Stash potential
+ warnings in _bfd_per_xvec_warn location.
+ * format.c (clear_warnmsg): New function.
+ (bfd_check_format_matches): Call clear_warnmsg before trying
+ a new xvec. Print warnings for the successful non-archive
+ match.
+ * targets.c: Include libiberty.h.
+ (_bfd_target_vector_entries): Use ARRAY_SIZE.
+ (per_xvec_warn): New.
+ (_bfd_per_xvec_warn): New function.
+ * Makefile.am (LIBBFD_H_FILES): Add targets.c.
+ * Makefile.in: Regenerate.
+ * libbfd.h: Regenerate.
+
+2022-09-24 Alan Modra <amodra@gmail.com>
+
+ Re: bfd_cleanup for object_p
+ Bits still missing from commit cb001c0d283d.
+
+ * aoutx.h (aout_@var{size}_some_aout_object_p): Correct synopsis.
+ * i386lynx.c (lynx_core_file_p): Correct return type.
+ * ptrace-core.c (ptrace_unix_core_file_p): Likewise.
+
+2022-09-24 GDB Administrator <gdbadmin@sourceware.org>
+
+ Automatic date update in version.in
+
+2022-09-23 John Baldwin <jhb@FreeBSD.org>
+
+ Support AT_USRSTACKBASE and AT_USRSTACKLIM.
+ FreeBSD's kernel has recently added two new ELF auxiliary vector
+ entries to describe the location of the user stack for the initial
+ thread in a process.
+
+ This change displays the proper name and description of these entries
+ in 'info auxv'.
+
+2022-09-23 Christoph Müllner <christoph.muellner@vrull.eu>
+
+ RISC-V: Add Zawrs ISA extension support
+ This patch adds support for the Zawrs ISA extension
+ ("wrs.nto" and "wrs.sto" instructions).
+
+ The specification can be found here:
+ https://github.com/riscv/riscv-zawrs/blob/main/zawrs.adoc
+
+2022-09-23 Simon Marchi <simon.marchi@polymtl.ca>
+
+ gdb/testsuite/tui: start GDB with "set filename-display basename"
+ The test gdb.tui/tui-missing-src.exp fails on my CI machine, and I
+ concluded that it is caused by the long source directory name:
+
+ /home/jenkins/workspace/binutils-gdb_master_linuxbuild/platform/jammy-amd64/target_board/unix/src/binutils-gdb
+
+ The long name causes some particular redrawing that doesn't happen for
+ shorter directories, and causes a Term::command call to return too
+ early.
+
+ This can be reproduced by cloning the binutils-gdb repo in a directory
+ with a name similar to the one shown above.
+
+ $ pwd
+ /home/simark/workspace/binutils-gdb_master_linuxbuild/platform/jammy-amd64/target_board/unix/src/binutils-gdb/build/gdb
+ $ make check-read1 TESTS="gdb.tui/tui-missing-src.exp"
+ FAIL: gdb.tui/tui-missing-src.exp: checking if inside f2 ()
+ FAIL: gdb.tui/tui-missing-src.exp: f2.c must be displayed in source window
+ FAIL: gdb.tui/tui-missing-src.exp: check source box is empty after return
+ FAIL: gdb.tui/tui-missing-src.exp: Back in main
+
+ Note that using "make check" instead of "make check-read1" only shows
+ the last 2 failures for me.
+
+ When running gdb.tui/tui-missing-src.exp in a directory with a shorter
+ name, the terminal looks like this by the time the "checking if inside
+ f2" test runs:
+
+ Screen Dump (size 80 columns x 24 rows, cursor at column 6, row 23):
+ 0 +-...ld/binutils-gdb-noasan/gdb/testsuite/outputs/gdb.tui/tui-missing-src/f2.c-+
+ 1 | 1 |
+ 2 | 2 int |
+ 3 | 3 f2 (int x) |
+ 4 | 4 { |
+ 5 | > 5 x <<= 1; |
+ 6 | 6 return x+5; |
+ 7 | 7 } |
+ 8 | 8 |
+ 9 | 9 |
+ 10 | 10 |
+ 11 | 11 |
+ 12 | 12 |
+ 13 | 13 |
+ 14 +------------------------------------------------------------------------------+
+ 15 multi-thre Thread 0x7ffff7cc07 In: f2 L5 PC: 0x555555555143
+ 16 at /home/simark/build/binutils-gdb-noasan/gdb/testsuite/outputs/gdb.tui/tui-
+ 17 missing-src/main.c:6
+ 18 (gdb) next
+ 19 (gdb) step
+ 20 f2 (x=4)
+ 21 at /home/simark/build/binutils-gdb-noasan/gdb/testsuite/outputs/gdb.tui/tui-
+ 22 missing-src/f2.c:5
+ 23 (gdb)
+ PASS: gdb.tui/tui-missing-src.exp: checking if inside f2 ()
+
+ When running the `Term::command "step"` just before, GDB writes the
+ "step", which makes the `wait_for` proc go in the "looking for the
+ prompt" mode, to know when the command's execution is complete. As some
+ new output appears, lines that must disappear are deleted using the
+ "Delete Line" operation [1] and some new ones are drawn. The source
+ window gets redrawn with the contents of the f2.c file. Then, GDB
+ writes the prompt (at line 23 above), which satisfies `wait_for`, which
+ then returns. The state of the terminal is therefore correct for the
+ "check if inside f2" and "f2.c must be displayed in the source window"
+ tests.
+
+ In the non-working case, the terminal looks like this by the time the
+ "check if inside f2" test runs:
+
+ Screen Dump (size 80 columns x 24 rows, cursor at column 6, row 17):
+ 0 +------------------------------------------------------------------------------+
+ 1 | |
+ 2 | |
+ 3 | |
+ 4 | |
+ 5 | |
+ 6 | |
+ 7 | [ No Source Available ] |
+ 8 | |
+ 9 | |
+ 10 | |
+ 11 | |
+ 12 | |
+ 13 | |
+ 14 +------------------------------------------------------------------------------+
+ 15 multi-thre Thread 0x7ffff7cc1b In: main L7 PC: 0x555555555128
+ 16 sing-src/main.c:6
+ 17 (gdb) ary breakpoint 1, main ()
+ 18 at /home/simark/workspace/binutils-gdb_master_linuxbuild/platform/jammy-amd6
+ 19 4/target_board/unix/src/binutils-gdb/build/gdb/testsuite/outputs/gdb.tui/tui-mis
+ 20 sing-src/main.c:6
+ 21 (gdb) next
+ 22 (gdb) step
+ 23
+ FAIL: gdb.tui/tui-missing-src.exp: checking if inside f2 ()
+
+ What happened is: GDB wrote the "step" command, which make the
+ `wait_for` proc go in its "looking for the prompt" mode. However,
+ curses decided to redraw whatever scrolled up to line 17 using some
+ standard character insertion operations:
+
+ +++ Cursor Down (1), cursor: (16, 0) -> (17, 0)
+ +++ Inserting string '('
+ +++ Inserted char '(', cursor: (17, 0) -> (17, 1)
+ +++ Inserted string '(', cursor: (17, 0) -> (17, 1)
+ +++ Inserting string 'g'
+ +++ Inserted char 'g', cursor: (17, 1) -> (17, 2)
+ +++ Inserted string 'g', cursor: (17, 1) -> (17, 2)
+ +++ Inserting string 'd'
+ +++ Inserted char 'd', cursor: (17, 2) -> (17, 3)
+ +++ Inserted string 'd', cursor: (17, 2) -> (17, 3)
+ +++ Inserting string 'b'
+ +++ Inserted char 'b', cursor: (17, 3) -> (17, 4)
+ +++ Inserted string 'b', cursor: (17, 3) -> (17, 4)
+ +++ Inserting string ')'
+ +++ Inserted char ')', cursor: (17, 4) -> (17, 5)
+ +++ Inserted string ')', cursor: (17, 4) -> (17, 5)
+ +++ Inserting string ' '
+ +++ Inserted char ' ', cursor: (17, 5) -> (17, 6)
+ +++ Inserted string ' ', cursor: (17, 5) -> (17, 6)
+
+ And that causes `wait_for` to think the "step" command is complete.
+ This is wrong, as the prompt at line 17 isn't the prompt drawn after the
+ completion of the "step" command. The subsequent tests now run with a
+ partially updated screen (what is shown above) and obviously fail.
+
+ The ideal way to fix this would be for `wait_for` to be smarter, to
+ avoid it confusing the different prompts drawn.
+
+ However, I would also like to reduce the variations in TUI test results
+ due to the directories (source and build) in which tests are ran. TUI
+ tests are more prone to differences in test results due to variations in
+ directory names than other tests, as it makes curses take different
+ redrawing decisions. So in this patch, I propose to make TUI tests use
+ "set filename-display basename", which makes GDB omit directory names
+ when it prints file names. This way, regardless of where you run the
+ tests, you should get the same results (all other things being equal).
+
+ Doing this happens to fix my failures and makes my CI happy (which in
+ turns makes me happy). To be clear, I understand that this does not fix
+ the root issue of `proc wait_for` being confused. However, it makes TUI
+ test runs be more similar for everyone, such that there's less chance of
+ TUI tests randomly failing for somebody. If some other change triggers
+ the `wait_for` problem again in the future, hopefully everybody will see
+ the problem and we can work on getting it fixed more easily than if just
+ one unlucky person sees the problem.
+
+ Note that there are other reasons why TUI tests could vary, like
+ different curses library versions taking different re-drawing decisions.
+ However, I think my change is a good step towards more stable test
+ results.
+
+ [1] https://vt100.net/docs/vt510-rm/DL.html
+
+ Change-Id: Ib18da83317e7b78a46f77892af0d2e39bd261bf5
+
+2022-09-23 Jiangshuai Li <jiangshuai_li@linux.alibaba.com>
+
+ gdb/csky add cskyv2-linux.xml for cskyv2-linux.c
+ Add cskyv2-linux.xml for re-generating cskyv2-linux.c if needed.
+ Also update cskyv2-linux.c.
+
+2022-09-23 Alan Modra <amodra@gmail.com>
+
+ pdb: _bfd_generic_close_and_cleanup
+ Every format that might appear inside a generic archive needs to call
+ _bfd_generic_close_and_cleanup, so that the archive element lookup
+ htab can be tidied on closing an element. Otherwise you get stale
+ entries in the htab pointing at freed and perhaps reused memory,
+ resulting in segfaults when the archive is closed.
+
+ Calling _bfd_generic_close_and_cleanup on close means tdata needs to
+ be set up too, since pdb claims to be of format bfd_archive.
+
+ * pdb.c (pdb_close_and_cleanup): Define as
+ _bfd_generic_close_and_cleanup.
+ (pdb_archive_p): Set up tdata for bfd_archive format.
+
+2022-09-23 Alan Modra <amodra@gmail.com>
+
+ Don't attempt to compress bss sections
+ It doesn't make sense to try to compress a section without contents
+ since those sections take no space on disk. Compression can only
+ increase the disk image size.
+
+ * coffgen.c (make_a_section_from_file): Exclude !SEC_HAS_CONTENTS
+ sections from compression and decompression.
+ * elf.c (_bfd_elf_make_section_from_shdr): Likewise.
+
+2022-09-23 GDB Administrator <gdbadmin@sourceware.org>
+
+ Automatic date update in version.in
+
+2022-09-22 Lancelot SIX <lancelot.six@amd.com>
+
+ gdb/testsuite/lib/future.exp: follow dejagnu default_target_compile
+ GDB's testsuite can override dejagnu's default_target_compile if the
+ system provided dejagnu installation does not provide support to compile
+ languages GDB needs.
+
+ Recent version of dejagnu (1.6.3, installed on RHEL-9) includes ba60272
+ "Establish a default C compiler by evaluating [find_gcc] if no other
+ compiler is given."[1]. This commit removed calls such as
+ `set_board_info compiler "[find_gcc]"` from the various baseboards
+ and has default_target_compile call `find_gcc` itself to find a compiler
+ if none was specified by the board description.
+
+ On systems with dejagnu-1.6.3, if GDB's overrides is needed to support
+ languages still unknown to dejagnu, we end up in the following
+ situation:
+ - The system board files do not set the C compiler anymore,
+ - GDB's replacement for default_target_compile assumes that the
+ compiler should have been set up by the board file.
+
+ In this situation, no one sets the C compiler for the board and as a
+ result many test are not compiled and not executed:
+
+ [...]
+ Running .../gdb/testsuite/gdb.base/bt-on-error-and-warning.exp ...
+ gdb compile failed, default_target_compile: No compiler to compile with
+ Running .../gdb/testsuite/gdb.base/dprintf-non-stop.exp ...
+ gdb compile failed, default_target_compile: No compiler to compile with
+ Running .../gdb/testsuite/gdb.base/structs3.exp ...
+ gdb compile failed, default_target_compile: No compiler to compile with
+ [...]
+
+ We are observing this error with ROCgdb[2], a downstream port of GDB
+ supporting AMD GPUs. This port needs to use GDB's override of
+ default_target_compile to compile HIP programs since dejagnu does not
+ provide support for this language yet.
+
+ This patch changes gdb_default_target_compile_1 in a similar way
+ default_target_compile has been updated so both implementations remain
+ compatible. Even if this is not strictly required by GDB just yet,
+ I believe keeping both implementations in sync desirable.
+
+ Using board files provided with dejagnu <=1.6.2 is still supported: if
+ the compiler is set by the board file, gdb_default_target_compile_1 uses
+ it and does not need `find_gcc`.
+
+ Patch tested on x86_64 RHEL-9 and ubuntu-20.04 on top of GDB and ROCgdb.
+
+ [1] http://git.savannah.gnu.org/gitweb/?p=dejagnu.git;a=commit;h=ba60272a5ac6f6a7012acca03f596a6ed003f044
+ [2] https://github.com/ROCm-Developer-Tools/ROCgdb
+
+ Change-Id: Ibff52684d9cab8243a7c6748ecbd29f50c37e669
+
+2022-09-22 Christoph Müllner <christoph.muellner@vrull.eu>
+
+ RISC-V: Add T-Head MemPair vendor extension
+ T-Head has a range of vendor-specific instructions.
+ Therefore it makes sense to group them into smaller chunks
+ in form of vendor extensions.
+
+ This patch adds the XTheadMemPair extension, a collection of T-Head specific
+ two-GP-register memory operations.
+ The 'th' prefix and the "XTheadMemPair" extension are documented in a PR
+ for the RISC-V toolchain conventions ([1]).
+
+ [1] https://github.com/riscv-non-isa/riscv-toolchain-conventions/pull/19
+
+ Co-developed-by: Lifang Xia <lifang_xia@linux.alibaba.com>
+
+2022-09-22 Christoph Müllner <christoph.muellner@vrull.eu>
+
+ RISC-V: Add support for literal instruction arguments
+ This patch introduces support for arbitrary literal instruction
+ arguments, that are not encoded in the opcode.
+
+ A typical use case for this feature would be an instruction that
+ applies an implicit shift by a constant value on an immediate
+ (that is a real operand). With this patch it is possible to make
+ this shift visible in the dissasembly and support such artificial
+ parameter as part of the asssembly code.
+
+ Co-developed-by: Lifang Xia <lifang_xia@linux.alibaba.com>
+
+2022-09-22 Christoph Müllner <christoph.muellner@vrull.eu>
+
+ RISC-V: Add T-Head MemIdx vendor extension
+ T-Head has a range of vendor-specific instructions.
+ Therefore it makes sense to group them into smaller chunks
+ in form of vendor extensions.
+
+ This patch adds the XTheadMemIdx extension, a collection of T-Head specific
+ GPR memory access instructions.
+ The 'th' prefix and the "XTheadMemIdx" extension are documented in a PR
+ for the RISC-V toolchain conventions ([1]).
+
+ In total XTheadCmo introduces the following 44 instructions
+ (BU,HU,WU only for loads (zero-extend instead of sign-extend)):
+
+ * {L,S}{D,W,WU,H,HU,B,BU}{IA,IB} rd, rs1, imm5, imm2
+ * {L,S}R{D,W,WU,H,HU,B,BU} rd, rs1, rs2, imm2
+ * {L,S}UR{D,W,WU,H,HU,B,BU} rd, rs1, rs2, imm2
+
+ [1] https://github.com/riscv-non-isa/riscv-toolchain-conventions/pull/19
+
+ Co-developed-by: Lifang Xia <lifang_xia@linux.alibaba.com>
+
+2022-09-22 Christoph Müllner <christoph.muellner@vrull.eu>
+
+ RISC-V: Add T-Head FMemIdx vendor extension
+ T-Head has a range of vendor-specific instructions.
+ Therefore it makes sense to group them into smaller chunks
+ in form of vendor extensions.
+
+ This patch adds the XTheadFMemIdx extension, a collection of
+ T-Head-specific floating-point memory access instructions.
+ The 'th' prefix and the "XTheadFMemIdx" extension are documented
+ in a PR for the RISC-V toolchain conventions ([1]).
+
+ [1] https://github.com/riscv-non-isa/riscv-toolchain-conventions/pull/19
+
+ Co-developed-by: Lifang Xia <lifang_xia@linux.alibaba.com>
+
+2022-09-22 Christoph Müllner <christoph.muellner@vrull.eu>
+
+ RISC-V: Add T-Head MAC vendor extension
+ T-Head has a range of vendor-specific instructions.
+ Therefore it makes sense to group them into smaller chunks
+ in form of vendor extensions.
+
+ This patch adds the XTheadMac extension, a collection of
+ T-Head-specific multiply-accumulate instructions.
+ The 'th' prefix and the "XTheadMac" extension are documented
+ in a PR for the RISC-V toolchain conventions ([1]).
+
+ [1] https://github.com/riscv-non-isa/riscv-toolchain-conventions/pull/19
+
+ Co-developed-by: Lifang Xia <lifang_xia@linux.alibaba.com>
+
+2022-09-22 Christoph Müllner <christoph.muellner@vrull.eu>
+
+ RISC-V: Add T-Head CondMov vendor extension
+ T-Head has a range of vendor-specific instructions.
+ Therefore it makes sense to group them into smaller chunks
+ in form of vendor extensions.
+
+ This patch adds the XTheadCondMov extension, a collection of
+ T-Head-specific conditional move instructions.
+ The 'th' prefix and the "XTheadCondMov" extension are documented
+ in a PR for the RISC-V toolchain conventions ([1]).
+
+ [1] https://github.com/riscv-non-isa/riscv-toolchain-conventions/pull/19
+
+ Co-developed-by: Lifang Xia <lifang_xia@linux.alibaba.com>
+
+2022-09-22 Christoph Müllner <christoph.muellner@vrull.eu>
+
+ RISC-V: Add T-Head Bitmanip vendor extension
+ T-Head has a range of vendor-specific instructions.
+ Therefore it makes sense to group them into smaller chunks
+ in form of vendor extensions.
+
+ This patch adds the XThead{Ba,Bb,Bs} extensions, a collection of
+ T-Head-specific bitmanipulation instructions.
+ The 'th' prefix and the "XThead{Ba,Bb,Bs}" extension are documented
+ in a PR for the RISC-V toolchain conventions ([1]).
+
+ [1] https://github.com/riscv-non-isa/riscv-toolchain-conventions/pull/19
+
+ Co-developed-by: Lifang Xia <lifang_xia@linux.alibaba.com>
+
+2022-09-22 Christoph Müllner <christoph.muellner@vrull.eu>
+
+ RISC-V: Add support for arbitrary immediate encoding formats
+ This patch introduces support for arbitrary signed or unsigned immediate
+ encoding formats. The formats have the form "XsN@S" and "XuN@S" with N
+ being the number of bits and S the LSB position.
+
+ For example an immediate field of 5 bytes that encodes a signed value
+ and is stored in the bits 24-20 of the instruction word can use the
+ format specifier "Xs5@20".
+
+ Co-developed-by: Lifang Xia <lifang_xia@linux.alibaba.com>
+
+2022-09-22 Christoph Müllner <christoph.muellner@vrull.eu>
+
+ RISC-V: Add T-Head SYNC vendor extension
+ T-Head has a range of vendor-specific instructions.
+ Therefore it makes sense to group them into smaller chunks
+ in form of vendor extensions.
+
+ This patch adds the XTheadSync extension, a collection of
+ T-Head-specific multi-processor synchronization instructions.
+ The 'th' prefix and the "XTheadSync" extension are documented in a PR
+ for the RISC-V toolchain conventions ([1]).
+
+ [1] https://github.com/riscv-non-isa/riscv-toolchain-conventions/pull/19
+
+ Co-developed-by: Lifang Xia <lifang_xia@linux.alibaba.com>
+
+2022-09-22 Christoph Müllner <christoph.muellner@vrull.eu>
+
+ RISC-V: Add T-Head CMO vendor extension
+ T-Head has a range of vendor-specific instructions.
+ Therefore it makes sense to group them into smaller chunks
+ in form of vendor extensions.
+
+ This patch adds the XTheadCmo extension, a collection of T-Head specific
+ cache management operations.
+ The 'th' prefix and the "XTheadCmo" extension are documented in a PR
+ for the RISC-V toolchain conventions ([1]).
+
+ In total XTheadCmo introduces the following 21 instructions:
+
+ * DCACHE.{C,CI,I}ALL
+ * DCACHE.{C,CI,I}{PA,VA,SW} rs1
+ * DCACHE.C{PAL1,VAL1} rs1
+ * ICACHE.I{ALL,ALLS}
+ * ICACHE.I{PA,VA} rs1
+ * L2CACHE.{C,CI,I}ALL
+
+ Contrary to Zicbom, the XTheadCmo instructions don't have a constant
+ displacement, therefore we have a different syntax for the arguments.
+ To clarify this is intended behaviour, there is a set of negative test
+ for Zicbom-style arguments in x-thead-cmo-fail.s.
+
+ [1] https://github.com/riscv-non-isa/riscv-toolchain-conventions/pull/19
+
+ v2:
+ - Add missing DECLARE_INSN() list
+ - Fix ordering
+
+ Co-developed-by: Lifang Xia <lifang_xia@linux.alibaba.com>
+
+2022-09-22 Christoph Müllner <christoph.muellner@vrull.eu>
+
+ RISC-V: Add generic support for vendor extensions
+ This patch introduces changes that allow the integration of vendor ISA
+ extensions:
+ * Define a list of vendor extensions (riscv_supported_vendor_x_ext)
+ where vendor extensions can be added
+ * Introduce a section with a table in the documentation where vendor
+ extensions can be added
+
+ To add a vendor extension that consists of instructions only,
+ the following things need to be done:
+ * Add the extension to the riscv_supported_vendor_x_ext list
+ * Add lookup entry in riscv_multi_subset_supports
+ * Documenting the extension in c-riscv.texti
+ * Add test cases for all instructions
+ * Add MATCH*/MASK* constants and DECLARE_INSN() for all instructions
+ * Add new instruction class to enum riscv_insn_class
+ * Define the instructions in riscv_opcodes
+ * Additional changes if necessary (depending on the instructions)
+
+ Co-developed-by: Lifang Xia <lifang_xia@linux.alibaba.com>
+
+2022-09-22 Tom de Vries <tdevries@suse.de>
+
+ [gdb/symtab] Add all_comp_units/all_type_units views on all_units
+ Add all_comp_units/all_type_units views on all_units.
+
+ Having the views allows us to:
+ - easily get the number of CUs or TUs in all_units, and
+ - easily access the nth CU or TU.
+
+ This minimizes the use of tu_stats.nr_tus.
+
+ Tested on x86_64-linux.
+
+2022-09-22 Tom de Vries <tdevries@suse.de>
+
+ [gdb/symtab] Rename all_comp_units to all_units
+ Mechanically rename all_comp_units to all_units:
+ ...
+ $ sed -i 's/all_comp_units/all_units/' gdb/dwarf2/*
+ ...
+
+ Tested on x86_64-linux.
+
+2022-09-22 Yoshinori Sato <ysato@users.sourceforge.jp>
+
+ opcodes: SH fix bank register disassemble.
+ * sh-dis.c (print_insn_sh): Enforce bit7 of LDC Rm,Rn_BANK and STC
+ Rm_BANK,Rn is always 1.
+
+2022-09-22 Tsukasa OI <research_trasio@irq.a4lg.com>
+
+ include: Add macro to ignore -Wunused-but-set-variable
+ "-Wunused-but-set-variable" warning option can be helpful to track variables
+ that are written but not read thereafter. But it can be harmful if some of
+ the code is auto-generated and we have no ways to deal with it.
+
+ The particular example is Bison-generated code.
+
+ The new DIAGNOSTIC_IGNORE_UNUSED_BUT_SET_VARIABLE macro can be helpful on
+ such cases. A typical use of this macro is to place this macro before the
+ end of user prologues on Bison (.y) files.
+
+ include/ChangeLog:
+
+ * diagnostics.h (DIAGNOSTIC_IGNORE_UNUSED_BUT_SET_VARIABLE): New.
+
+2022-09-22 Tsukasa OI <research_trasio@irq.a4lg.com>
+
+ include: Add macro to ignore -Wuser-defined-warnings
+ User-defined warnings (on Clang, "-Wuser-defined-warnings") can be harmful
+ if we have specified "-Werror" and we have no control to disable the warning
+ ourself. The particular example is Gnulib.
+
+ Gnulib generates a warning if the system version of certain functions
+ are used (to redirect the developer to use Gnulib version). However,
+ it can be harmful if we cannot easily replace them (e.g. the target is in
+ the standard C++ library).
+
+ The new DIAGNOSTIC_IGNORE_USER_DEFINED_WARNINGS macro can be helpful on such
+ cases. A typical use of this macro is to place this macro before including
+ certain system headers.
+
+ include/ChangeLog:
+
+ * diagnostics.h (DIAGNOSTIC_IGNORE_USER_DEFINED_WARNINGS): New.
+
+2022-09-22 Andrew Burgess <aburgess@redhat.com>
+
+ gdb/python: restrict the names accepted by gdb.register_window_type
+ I noticed that, from Python, I could register a new TUI window that
+ had whitespace in its name, like this:
+
+ gdb.register_window_type('my window', MyWindowType)
+
+ however, it is not possible to then use this window in a new TUI
+ layout, e.g.:
+
+ (gdb) tui new-layout foo my window 1 cmd 1
+ Unknown window "my"
+ (gdb) tui new-layout foo "my window" 1 cmd 1
+ Unknown window ""my"
+ (gdb) tui new-layout foo my\ window 1 cmd 1
+ Unknown window "my\"
+
+ GDB clearly uses the whitespace to split the incoming command line.
+
+ I could fix this by trying to add a mechanism by which we can use
+ whitespace within a window name, but it seems like an easier solution
+ if we just forbid whitespace within a window name. Not only is this
+ easier, but I think this is probably the better solution, identifier
+ names with spaces in would mean we'd need to audit all the places a
+ window name could be printed and ensure that the use of a space didn't
+ make the output ambiguous.
+
+ So, having decided to disallow whitespace, I then thought about other
+ special characters. We currently accept anything as a window name,
+ and I wondered if this was a good idea.
+
+ My concerns were about how special characters used in a window name
+ might cause confusion, for example, we allow '$' in window names,
+ which is maybe fine now, but what if one day we wanted to allow
+ variable expansion when creating new layouts? Or what about starting
+ a window name with '-'? We already support a '-horizontal' option,
+ what if we want to add more in the future? Or use of the special
+ character '{' which has special meaning within a new layout?
+
+ In the end I figured it might make sense to place some restrictive
+ rules in place, and then relax the rules later if/when users complain,
+ we can consider each relaxation as its requested.
+
+ So, I propose that window names should match this regular expression:
+
+ [a-zA-Z][-_.a-zA-Z0-9]*
+
+ There is a chance that there is user code in the wild which will break
+ with the addition of this change, but hopefully adapting to the new
+ restrictions shouldn't be too difficult.
+
+2022-09-22 Bruno Larsen <blarsen@redhat.com>
+
+ gdb/testsuite: Add test to step through function epilogue
+ The testsuite implicitly tests GDB's ability to step through epilogues
+ in multiple tests, without doing it explicitly anywhere. This is
+ unfortunate, as clang does not emit epilogue information, so using clang
+ on our testsuite makes many tests fail. This patch adds a central,
+ explicit test for walking through the epilogue so we can safely remove
+ this from other tests and have them working with clang.
+
+ The test created attempts to step through a simple epilogue, an
+ epilogue that ends on another epilogue, and epilogues leading to other
+ function calls.
+
+2022-09-22 Bruno Larsen <blarsen@redhat.com>
+
+ gdb.base/skip.exp: Use finish to exit functions
+ gdb.base/skip.exp was making use of a fixed number of step commands to
+ exit some functions. This caused some problems when using clang to test
+ GDB, as GDB would need fewer steps to reach the desired spots. For
+ instance, when testing in the section "step after disabling 3", the log
+ looks like this:
+
+ Breakpoint 4, main () at binutils-gdb/gdb/testsuite/gdb.base/skip.c:32
+ 32 x = baz ((bar (), foo ()));
+ (gdb) step
+ bar () at binutils-gdb/gdb/testsuite/gdb.base/skip1.c:21
+ 21 return 1;
+ (gdb) PASS: gdb.base/skip.exp: step after disabling 3: step 1
+ step
+ foo () at binutils-gdb/gdb/testsuite/gdb.base/skip.c:42
+ 42 return 0;
+ (gdb) PASS: gdb.base/skip.exp: step after disabling 3: step 2
+ step
+ main () at binutils-gdb/gdb/testsuite/gdb.base/skip.c:34
+ 34 test_skip_file_and_function ();
+ (gdb) step
+ test_skip_file_and_function () at binutils-gdb/gdb/testsuite/gdb.base/skip.c:59
+ 59 test_skip ();
+ (gdb) FAIL: gdb.base/skip.exp: step after disabling 3: step 3
+ step
+ test_skip () at binutils-gdb/gdb/testsuite/gdb.base/skip.c:48
+ 48 }
+ (gdb) PASS: gdb.base/skip.exp: step after disabling 3: step 4
+ step
+ test_skip_file_and_function () at binutils-gdb/gdb/testsuite/gdb.base/skip.c:60
+ 60 skip1_test_skip_file_and_function ();
+ (gdb) FAIL: gdb.base/skip.exp: step after disabling 3: step 5
+
+ This shows that the feature is working but because the inferior lands in
+ a different location, it registers as a failure. Seeing as along with
+ this difference, there are also some differences that depend on gcc
+ versions (where gdb might stop back at line 32 before entering foo), it
+ would not be easy to test for this behavior using steps and analzing
+ where the inferior stops at each point. On the other hand, using
+ gdb_step_until is not feasible because we'd possibly gloss over stepping
+ into baz and rendering the whole test useless. Instead, skip.exp now
+ uses finish to leave functions, synchronizing through compilers and
+ compiler versions. Some test names were also changed to be a bit more
+ descriptive. The new log looks like this, independently of compiler used:
+
+ Breakpoint 4, main () at binutils-gdb/gdb/testsuite/gdb.base/skip.c:32
+ 32 x = baz ((bar (), foo ()));
+ (gdb) step
+ bar () at binutils-gdb/gdb/testsuite/gdb.base/skip1.c:21
+ 21 return 1;
+ (gdb) PASS: gdb.base/skip.exp: step after disabling 3: step into bar
+ finish
+ Run till exit from #0 bar () at binutils-gdb/gdb/testsuite/gdb.base/skip1.c:21
+ main () at binutils-gdb/gdb/testsuite/gdb.base/skip.c:32
+ 32 x = baz ((bar (), foo ()));
+ Value returned is $2 = 1
+ (gdb) PASS: gdb.base/skip.exp: step after disabling 3: return from bar
+ step
+ foo () at binutils-gdb/gdb/testsuite/gdb.base/skip.c:42
+ 42 return 0;
+ (gdb) PASS: gdb.base/skip.exp: step after disabling 3: step into foo
+ finish
+ Run till exit from #0 foo () at binutils-gdb/gdb/testsuite/gdb.base/skip.c:42
+ main () at binutils-gdb/gdb/testsuite/gdb.base/skip.c:32
+ 32 x = baz ((bar (), foo ()));
+ Value returned is $3 = 0
+ (gdb) PASS: gdb.base/skip.exp: step after disabling 3: Return from foo
+ step
+ 34 test_skip_file_and_function ();
+ (gdb) PASS: gdb.base/skip.exp: step after disabling 3: step and skip baz
+
+2022-09-22 Bruno Larsen <blarsen@redhat.com>
+
+ fix gdb.base/jit-elf.exp when testing with clang
+ When using clang as the compiler for the target, gdb.base/jit-elf.exp
+ was failing because the filename displayed when GDB attached to the
+ inferior was only showing up as with a relative path, like so:
+
+ (gdb) attach 3674146
+ Attaching to program: /home/blarsen/Documents/gdb-build/gdb/testsuite/outputs/gdb.base/jit-elf/jit-elf-main, process 3674146
+ Reading symbols from /lib64/libm.so.6...
+ Reading symbols from .gnu_debugdata for /lib64/libm.so.6...
+ (No debugging symbols found in .gnu_debugdata for /lib64/libm.so.6)
+ Reading symbols from /lib64/libc.so.6...
+ (No debugging symbols found in /lib64/libc.so.6)
+ Reading symbols from /lib64/ld-linux-x86-64.so.2...
+ [Thread debugging using libthread_db enabled]
+ Using host libthread_db library "/lib64/libthread_db.so.1".
+ 0x00000000004013ff in main (argc=3, argv=0x7fffffffd820) at ../../../common/git-repos/binutils-gdb/gdb/testsuite/gdb.base/jit-elf-main.c:118
+ 118| WAIT_FOR_GDB; i = 0; /* gdb break here 1 */
+ (gdb) FAIL: gdb.base/jit-elf.exp: attach: one_jit_test-2: break here 1: attach
+
+ While gcc's output is as follows:
+
+ (gdb) attach 3592961
+ Attaching to program: /home/blarsen/Documents/gdb-build/gdb/testsuite/outputs/gdb.base/jit-elf/jit-elf-main, process 3592961
+ Reading symbols from /lib64/libm.so.6...
+ Reading symbols from .gnu_debugdata for /lib64/libm.so.6...
+ (No debugging symbols found in .gnu_debugdata for /lib64/libm.so.6)
+ Reading symbols from /lib64/libc.so.6...
+ (No debugging symbols found in /lib64/libc.so.6)
+ Reading symbols from /lib64/ld-linux-x86-64.so.2...
+ [Thread debugging using libthread_db enabled]
+ Using host libthread_db library "/lib64/libthread_db.so.1".
+ main (argc=3, argv=0x7fffffffd860) at /home/blarsen/Documents/gdb-build/gdb/testsuite/../../../common/git-repos/binutils-gdb/gdb/testsuite/gdb.base/jit-elf-main.c:118
+ 118| WAIT_FOR_GDB; i = 0; /* gdb break here 1 */
+ (gdb) PASS: gdb.base/jit-elf.exp: attach: one_jit_test-2: break here 1: attach
+
+ This difference only happens when GDB's configure is ran using a
+ relative path, but seeing as testing the full path is not important for
+ this specific test, it feels worth fixing anyway. To fix the false
+ positive, the regexp for checking where gdb has stopped was relaxed a
+ little to allow the relative path.
+
+2022-09-22 Bruno Larsen <blarsen@redhat.com>
+
+ gdb/testsuite: fix gdb.base/msym-bp-shl when running with Clang
+ When trying to test gdb.base/msym-bp-shl.exp using clang, it would have
+ many failures because one of the version of the foo function was being
+ optimized away. Adding __attribute__ ((used)) to it fixed this.
+
+2022-09-22 Bruno Larsen <blarsen@redhat.com>
+
+ gdb/testsuite: fix testing gdb.base/skip-inline.exp with clang
+ When testing gdb.base/skip-inline.exp using clang, we get failures
+ when trying to step out of functions, since clang requires one fewer
+ step when compared to gcc. The inferior gets increasingly out of sync
+ as the test continues because of this difference, which generates those
+ failures.
+
+ This commit fixes this by switching those hardcoded steps to
+ gdb_step_until, to guarantee that the inferior is always synced to what
+ the test expects. This approach does not work for the parts that use
+ step 2 or step 3, so when we identify that clang is being used, those
+ tests are skipped.
+
+2022-09-22 Bruno Larsen <blarsen@redhat.com>
+
+ Change gdb.base/skip-solib.exp deal with lack of epilogue information
+ When running gdb.base/skip-solib.exp, the backtrace tests could fail with
+ compilers that associated epilogue instructions with the last statement
+ line of the function, instead of associating it with the closing brace,
+ despite the feature being fully functional. As an example, when testing
+ skipping the function square, the testsuite would show
+
+ Breakpoint 1, main () at (...)/binutils-gdb/gdb/testsuite/gdb.base/skip-solib-main.c:5
+ 5 return square(0);
+ (gdb) step
+ 0x00007ffff7cef560 in __libc_start_call_main () from /lib64/libc.so.6
+ (gdb) PASS: gdb.base/skip-solib.exp: ignoring solib file: step
+ bt
+ #0 0x00007ffff7cef560 in __libc_start_call_main () from /lib64/libc.so.6
+ #1 0x00007ffff7cef60c in __libc_start_main_impl () from /lib64/libc.so.6
+ #2 0x0000000000401065 in _start ()
+ (gdb) FAIL: gdb.base/skip-solib.exp: ignoring solib file: bt
+
+ Which means that the feature is working, the testsuite is just
+ mis-identifying it. To avoid this problem, the skipped function calls
+ have been sent to a line before `return`, so epilogues won't factor in.
+
+2022-09-22 Bruno Larsen <blarsen@redhat.com>
+
+ gdb/testsuite: Add a proc to test where compiler links the epilogue
+ Different compilers link the epilogue of functions to different lines.
+ As an example, gcc links it to the closing brace of the function,
+ whereas clang links it to the last statement of the function. This
+ difference is important for the testsuite, since the where GDB will land
+ after a step can be wildly different. Where possible, this dependency
+ should be side-stepped in the testsuite, but it isn't always possible,
+ so this commit adds a gdb_caching_proc that is able to detect where the
+ epilogue is linked, so tests can react accordingly.
+
+2022-09-22 Clément Chigot <chigot@adacore.com>
+
+ ld/testsuite: allow to force another directory for gcc linker
+ Add a new variable "ld_testsuite_tmpdir" to enable manual configuration
+ of the -B flag added to gcc calls. This flag ensure that gcc is invoking
+ the linker and the assembler we want to test.
+
+ When launching the testsuite outside of the build tree, the links made
+ by the testsuite in tmpdir/ld will point to nothing. Thus, even with the
+ PATH correctly setup towards the linker directory, gcc might end up
+ falling back to its default linker. Hence this variable to ensure that
+ gcc, whatever happens, is using the linker we want.
+
+ ld/ChangeLog:
+
+ * testsuite/config/default.exp: Allow to change -B flag with
+ ld_testsuite_bindir variable.
+
+2022-09-22 Clément Chigot <chigot@adacore.com>
+
+ ld/testsuite: skip bootstrap.exp when OFILES are missing
+ OFILES are normally provided through an environment variable set by
+ Makefiles. However, when launching the testsuite directly through
+ runtest outside the build tree, it can be hard to retrieve them.
+ Thus, they can be missing.
+ Instead of letting tcl raise an error when trying to access this
+ OFILES variable, skip bootstrap.exp if it doesn't exist.
+
+ ld/ChangeLog:
+
+ * testsuite/ld-bootstrap/bootstrap.exp: Skip if OFILES is
+ missing
+
+2022-09-22 Tsukasa OI <research_trasio@irq.a4lg.com>
+
+ RISC-V: Remove "b" operand type from disassembler
+ There are a few operand types not used by any RISC-V instructions.
+
+ - Cx
+ - Vf
+ - Ve
+ - [
+ - ]
+ - b
+
+ But most of them has a reasoning to keep them:
+
+ - Cx : Same as "Ct" except it has a constraint to have rd == rs2
+ (similar to "Cw"). Although it hasn't used, its role is clear
+ enough to implement a new instruction with this operand type.
+ - Vf, Ve : Used by vector AMO instructions (not ratified and real
+ instructions are not upstreamed yet).
+ - [, ] : Unused tokenization symbols. Reserving them is not harmful
+ and a vendor may use this symbol for special purposes.
+
+ ... except "b". I could not have found any reference to this operand type
+ except it works like the "s" operand type. Historically, it seems... it's
+ just unused from the beginning. Its role is not clear either.
+
+ On such cases, we should vacate this room for the new operand type with
+ much clearer roles.
+
+ opcodes/ChangeLog:
+
+ * riscv-dis.c (print_insn_args): Remove 'b' operand type.
+
+2022-09-22 Tsukasa OI <research_trasio@irq.a4lg.com>
+
+ RISC-V: Add macro-only operands to validate_riscv_insn
+ Although they are not (and should not be) reachable, following macro-only
+ operands are parsed in the `validate_riscv_insn' function and ignored.
+ That function also notes that they are macro-only.
+
+ - "A"
+ - "B"
+ - "I"
+
+ Following this convention, this commit adds three remaining macro-only
+ operands to this function. By doing this, we could instead choose to reject
+ those operands from appearing in regular instructions later.
+
+ - "c" (used by call, tail and jump macros)
+ - "VM" (used by vmsge.vx and vmsgeu.vx macros)
+ - "VT" (likewise)
+
+ gas/ChangeLog:
+
+ * config/tc-riscv.c (validate_riscv_insn): Add "c", "VM" and "VT"
+ macro-only operand types.
+
+2022-09-22 Vladimir Mezentsev <vladimir.mezentsev@oracle.com>
+
+ gprofng: fix -Wduplicated-cond warning
+ gprofng/ChangeLog
+ 2022-09-21 Vladimir Mezentsev <vladimir.mezentsev@oracle.com>
+
+ * src/collctrl.cc: Fix -Wduplicated-cond warning.
+
+2022-09-22 GDB Administrator <gdbadmin@sourceware.org>
+
+ Automatic date update in version.in
+
+2022-09-21 Alan Modra <amodra@gmail.com>
+
+ bfd BLD-POTFILES.in dependencies
+ A file that consists of a list of files doesn't depend on those files
+ being built. This patch came from trying to avoid a maintainer-mode
+ make -j bug, where the recipe for targmatch.h was being run twice in
+ parallel. Typical output shown below.
+
+ make[2]: Entering directory '/build/gas/all/bfd'
+ GEN bfdver.h
+ GEN elf32-target.h
+ GEN elf64-target.h
+ GEN targmatch.h
+ Making info in po
+ make[3]: Entering directory '/build/gas/all/bfd/po'
+ cd .. && make po/SRC-POTFILES.in
+ cd .. && make po/BLD-POTFILES.in
+ make[4]: Entering directory '/build/gas/all/bfd'
+ GEN elf32-aarch64.c
+ GEN elf64-aarch64.c
+ GEN elf32-ia64.c
+ GEN elf64-ia64.c
+ GEN elf32-loongarch.c
+ GEN elf64-loongarch.c
+ GEN elf32-riscv.c
+ GEN elf64-riscv.c
+ GEN peigen.c
+ GEN pepigen.c
+ GEN pex64igen.c
+ GEN pe-aarch64igen.c
+ GEN targmatch.h
+ make[4]: Entering directory '/build/gas/all/bfd'
+ CCLD doc/chew.stamp
+ mv: cannot stat 'targmatch.new': No such file or directory
+ make[4]: *** [Makefile:2325: targmatch.h] Error 1
+
+ * Makefile.am (po/BLD-POTFILES.in): Don't depend on $(BLD_POTFILES).
+ (po/SRC-POTFILES.in): Don't depend on $(SRC_POTFILES).
+
+2022-09-21 Simon Marchi <simon.marchi@polymtl.ca>
+
+ gdbsupport: move fileio_errno_to_host to fileio.{h,cc} and rename
+ gdb_bfd.c and remote.c contain identical implementations of a
+ fileio_error -> errno function. Factor that out to
+ gdbsupport/fileio.{h,cc}.
+
+ Rename it fileio_error_to_host, for symmetry with host_to_fileio_error.
+
+ Change-Id: Ib9b8807683de2f809c94a5303e708acc2251a0df
+
+2022-09-21 Simon Marchi <simon.marchi@efficios.com>
+
+ gdbsupport: convert FILEIO_* macros to an enum
+ Converting from free-form macros to an enum gives a bit of type-safety.
+ This caught places where we would assign host error numbers to what
+ should contain a target fileio error number, for instance in
+ target_fileio_pread.
+
+ I added the FILEIO_SUCCESS enumerator, because
+ remote.c:remote_hostio_parse_result initializes the remote_errno output
+ variable to 0. It seems better to have an explicit enumerator than to
+ assign a value for which there is no enumerator. I considered
+ initializing this variable to FILEIO_EUNKNOWN instead, such that if the
+ remote side replies with an error and omits the errno value, we'll get
+ an errno that represents an error instead of 0 (which reprensents no
+ error). But it's not clear what the consequences of that change would
+ be, so I prefer to err on the side of caution and just keep the existing
+ behavior (there is no intended change in behavior with this patch).
+
+ Note that remote_hostio_parse_resul still reads blindly what the remote
+ side sends as a target errno into this variable, so we can still end up
+ with a nonsensical value here. It's not good, but out of the scope of
+ this patch.
+
+ Convert host_to_fileio_error and fileio_errno_to_host to return / accept
+ a fileio_error instead of an int, and cascade the change in the whole
+ chain that uses that.
+
+ Change-Id: I454b0e3fcf0732447bc872252fa8e57d138b0e03
+
+2022-09-21 Simon Marchi <simon.marchi@efficios.com>
+
+ gdbsupport: move include/gdb/fileio.h contents to fileio.h
+ I don't see why include/gdb/fileio.h is placed there. It's not
+ installed by "make install", and it's not included by anything outside
+ of gdb/gdbserver/gdbsupport.
+
+ Move its content back to gdbsupport/fileio.h. I have omitted the bits
+ inside an `#if 0`, since it's obviously not used, as well as the
+ "limits" constants, which are also unused.
+
+ Change-Id: I6fbc2ea10fbe4cfcf15f9f76006b31b99c20e5a9
+
+2022-09-21 Simon Marchi <simon.marchi@efficios.com>
+
+ gdbsupport: change path_join parameter to array_view<const char *>
+ When a GDB built with -D_GLIBCXX_DEBUG=1 reads a binary with a single
+ character name, we hit this assertion failure:
+
+ $ ./gdb -q --data-directory=data-directory -nx ./x
+ /usr/include/c++/12.1.0/string_view:239: constexpr const std::basic_string_view<_CharT, _Traits>::value_type& std::basic_string_view<_CharT, _Traits>::operator[](size_type) const [with _CharT = char; _Traits = std::char_traits<char>; const_reference = const char&; size_type = long unsigned int]: Assertion '__pos < this->_M_len' failed.
+
+ The backtrace:
+
+ #3 0x00007ffff6c0f002 in std::__glibcxx_assert_fail (file=<optimized out>, line=<optimized out>, function=<optimized out>, condition=<optimized out>) at /usr/src/debug/gcc/libstdc++-v3/src/c++11/debug.cc:60
+ #4 0x000055555da8a864 in std::basic_string_view<char, std::char_traits<char> >::operator[] (this=0x7fffffffcc30, __pos=1) at /usr/include/c++/12.1.0/string_view:239
+ #5 0x00005555609dcb88 in path_join[abi:cxx11](gdb::array_view<std::basic_string_view<char, std::char_traits<char> > const>) (paths=...) at /home/simark/src/binutils-gdb/gdbsupport/pathstuff.cc:203
+ #6 0x000055555e0443f4 in path_join<char const*, char const*> () at /home/simark/src/binutils-gdb/gdb/../gdbsupport/pathstuff.h:84
+ #7 0x00005555609dc336 in gdb_realpath_keepfile[abi:cxx11](char const*) (filename=0x6060000a8d40 "/home/simark/build/binutils-gdb-one-target/gdb/./x") at /home/simark/src/binutils-gdb/gdbsupport/pathstuff.cc:122
+ #8 0x000055555ebd2794 in exec_file_attach (filename=0x7fffffffe0f9 "./x", from_tty=1) at /home/simark/src/binutils-gdb/gdb/exec.c:471
+ #9 0x000055555f2b3fb0 in catch_command_errors (command=0x55555ebd1ab6 <exec_file_attach(char const*, int)>, arg=0x7fffffffe0f9 "./x", from_tty=1, do_bp_actions=false) at /home/simark/src/binutils-gdb/gdb/main.c:513
+ #10 0x000055555f2b7e11 in captured_main_1 (context=0x7fffffffdb60) at /home/simark/src/binutils-gdb/gdb/main.c:1209
+ #11 0x000055555f2b9144 in captured_main (data=0x7fffffffdb60) at /home/simark/src/binutils-gdb/gdb/main.c:1319
+ #12 0x000055555f2b9226 in gdb_main (args=0x7fffffffdb60) at /home/simark/src/binutils-gdb/gdb/main.c:1344
+ #13 0x000055555d938c5e in main (argc=5, argv=0x7fffffffdcf8) at /home/simark/src/binutils-gdb/gdb/gdb.c:32
+
+ The problem is this line in path_join:
+
+ gdb_assert (strlen (path) == 0 || !IS_ABSOLUTE_PATH (path));
+
+ ... where `path` is "x". IS_ABSOLUTE_PATH eventually calls
+ HAS_DRIVE_SPEC_1:
+
+ #define HAS_DRIVE_SPEC_1(dos_based, f) \
+ ((f)[0] && ((f)[1] == ':') && (dos_based))
+
+ This macro accesses indices 0 and 1 of the input string. However, `f`
+ is a string_view of length 1, so it's incorrect to try to access index
+ 1. We know that the string_view's underlying object is a null-terminated
+ string, so in practice there's no harm. But as far as the string_view
+ is concerned, index 1 is considered out of bounds.
+
+ This patch makes the easy fix, that is to change the path_join parameter
+ from a vector of to a vector of `const char *`. Another solution would
+ be to introduce a non-standard gdb::cstring_view class, which would be a
+ view over a null-terminated string. With that class, it would be
+ correct to access index 1, it would yield the NUL character. If there
+ is interest in having this class (it has been mentioned a few times in
+ the past) I can do it and use it here.
+
+ This was found by running tests such as gdb.ada/arrayidx.exp, which
+ produce 1-char long filenames, so adding a new test is not necessary.
+
+ Change-Id: Ia41a16c7243614636b18754fd98a41860756f7af
+
+2022-09-21 Simon Marchi <simon.marchi@polymtl.ca>
+
+ gdb: remove TYPE_LENGTH
+ Remove the macro, replace all uses with calls to type::length.
+
+ Change-Id: Ib9bdc954576860b21190886534c99103d6a47afb
+
+2022-09-21 Simon Marchi <simon.marchi@polymtl.ca>
+
+ gdb: add type::length / type::set_length
+ Add the `length` and `set_length` methods on `struct type`, in order to remove
+ the `TYPE_LENGTH` macro. In this patch, the macro is changed to use the
+ getter, so all the call sites of the macro that are used as a setter are
+ changed to use the setter method directly. The next patch will remove the
+ macro completely.
+
+ Change-Id: Id1090244f15c9856969b9be5006aefe8d8897ca4
+
+2022-09-21 Simon Marchi <simon.marchi@polymtl.ca>
+
+ gdb: remove TYPE_TARGET_TYPE
+ Remove the macro, replace all uses by calls to type::target_type.
+
+ Change-Id: Ie51d3e1e22f94130176d6abd723255282bb6d1ed
+
+2022-09-21 Simon Marchi <simon.marchi@polymtl.ca>
+
+ gdb: add type::target_type / type::set_target_type
+ Add the `target_type` and `set_target_type` methods on `struct type`, in order
+ to remove the `TYPE_TARGET_TYPE` macro. In this patch, the macro is changed to
+ use the getter, so all the call sites of the macro that are used as a setter
+ are changed to use the setter method directly. The next patch will remove the
+ macro completely.
+
+ Change-Id: I85ce24d847763badd34fdee3e14b8c8c14cb3161
+
+2022-09-21 Tsukasa OI <research_trasio@irq.a4lg.com>
+
+ RISC-V: Fix riscv_set_tso declaration
+ To avoid -Werror=strict-prototypes, this commit changes () to (void).
+ This is because "()" possibly means a function prototype with indeterminate
+ arguments on old C standards.
+
+ gas/ChangeLog:
+
+ * config/tc-riscv.c (riscv_set_tso): Fix declaration.
+
+2022-09-21 Alan Modra <amodra@gmail.com>
+
+ PR29566, objdump -p considers an empty .gnu.version_r invalid
+ Allow and ignore an empty section.
+
+ PR 29566
+ * elf.c (bfd_section_from_shdr): Don't set elf_dynverdef or
+ elf_dynverref for empty sections.
+ (_bfd_elf_slurp_version_tables): Remove now redundant tests.
+
+2022-09-21 Tsukasa OI <research_trasio@irq.a4lg.com>
+
+ RISC-V: Set EF_RISCV_TSO also on .option arch
+ This is a minor fix to commit 96462b012988d35ebb1137a2ad9fd0a96547d79a
+ ("RISC-V: Implement Ztso extension"). Currently, it sets EF_RISCV_TSO ELF
+ flag when initial ISA string contains the 'Ztso' extension. However, GAS
+ has a way to update the ISA string: ".option arch".
+
+ When the architecture is updated by ".option arch", EF_RISCV_RVC ELF flag
+ is set when the 'C' extension is detected. Analogously, this commit sets
+ the EF_RISCV_TSO when the 'Ztso' extension is detected.
+
+ gas/ChangeLog:
+
+ * config/tc-riscv.c (s_riscv_option): Set TSO ELF flag if the
+ 'Ztso' extension is specified via ".option arch" directive.
+
+2022-09-21 Alan Modra <amodra@gmail.com>
+
+ PR29573, addr2line doesn't display file/line for local symbols
+ The DWARF standard is clear that DW_AT_linkage_name is optional.
+ Compilers may not provide the attribute on functions and variables,
+ even though the language mangles names. g++ does not for local
+ variables and functions. Without DW_AT_linkage_name, mangled object
+ file symbols can't be directly matched against the source-level
+ DW_AT_name in DWARF info. One possibility is demangling the object
+ file symbols, but that comes with its own set of problems:
+ 1) A demangler might not be available for the compiler/language.
+ 2) Demangling doesn't give the source function name as stored in
+ DW_AT_name. Class and template parameters must be stripped at
+ least.
+
+ So this patch takes a simpler approach. A symbol matches DWARF info
+ if the DWARF address matches the symbol address, and if the symbol
+ name contains the DWARF name as a sub-string. Very likely the name
+ matching is entirely superfluous.
+
+ PR 29573
+ * dwarf.c (lookup_symbol_in_function_table): Match a symbol
+ containing the DWARF source name as a substring.
+ (lookup_symbol_in_variable_table): Likewise.
+ (_bfd_dwarf2_find_nearest_line_with_alt): If stash_find_line_fast
+ returns false, fall back to comp_unit_find_line.
+
+2022-09-21 Alan Modra <amodra@gmail.com>
+
+ dwarf2.c: simplify best_fit_len tests
+ * dwarf2.c (lookup_address_in_function_table): Simplify
+ best_fit_len test.
+ (info_hash_lookup_funcinfo): Likewise.
+ (lookup_symbol_in_function_table): Likewise, also reorder tests
+ and check "file" is set.
+ (lookup_symbol_in_variable_table): Reorder tests.
+
+2022-09-21 Alan Modra <amodra@gmail.com>
+
+ dwarf2.c: mangle_style
+ non_mangled incorrectly returned "true" for Ada. Correct that, and
+ add a few more non-mangled entries. Return a value suitable for
+ passing to cplus_demangle to control demangling.
+
+ * dwarf2.c: Include demangle.h.
+ (mangle_style): Rename from non_mangled. Return DMGL_* value
+ to suit lang. Adjust all callers.
+
+2022-09-21 Alan Modra <amodra@gmail.com>
+
+ dwarf2.c remove varinfo and funcinfo sec field
+ The "sec" field in these structures is only set and used in lookup
+ functions. It always starts off as NULL. So the only possible effect
+ of the field is to modify the return of the lookup, which was its
+ purpose back in 2005 when HJ fixed PR990. Since then we solved the
+ problem of relocatable object files with the fix for PR2338, so this
+ field is now redundant.
+
+ * dwarf.c (struct funcinfo, struct varinfo): Remove "sec" field.
+ (lookup_symbol_in_function_table): Don't set or test "sec".
+ (lookup_symbol_in_variable_table): Likewise.
+ (info_hash_lookup_funcinfo, info_hash_lookup_varinfo): Likewise.
+
+2022-09-21 Tsukasa OI <research_trasio@irq.a4lg.com>
+
+ configure: Pass CPPFLAGS_FOR_BUILD to subdirs
+ Because CPPFLAGS_FOR_BUILD is used in some subdirectories (through
+ bfd/warning.m4), not AC_SUBSTing the variable causes minor issues.
+
+ Fortunately, it didn't cause severe errors but error messages related to
+ @CPPFLAGS_FOR_BUILD@ (not AC_SUBSTed CPPFLAGS_FOR_BUILD variable passed
+ to subdirectories through Makefile) remain in config.log.
+
+ To avoid invalid invocation of preprocessor for build environment, we
+ need to set proper CPPFLAGS_FOR_BUILD (may be empty) and pass it to
+ subdirectories that need it. This is what this commit does.
+
+ ChangeLog:
+
+ * configure.ac: Pass CPPFLAGS_FOR_BUILD to subdirectories.
+ * configure: Regenerate.
+
+2022-09-21 Shihua <shihua@iscas.ac.cn>
+
+ RISC-V: Implement Ztso extension
+ This patch support ZTSO extension. It will turn on the tso flag for elf_flags
+ once we have enabled Ztso extension. This is intended to implement v0.1 of
+ the proposed specification which can be found in Chapter 25 of,
+ https://github.com/riscv/riscv-isa-manual/releases/download/draft-20220723-10eea63/riscv-spec.pdf.
+
+ bfd\ChangeLog:
+
+ * elfnn-riscv.c (_bfd_riscv_elf_merge_private_bfd_data): Set TSO flag.
+ * elfxx-riscv.c: Add Ztso's arch.
+
+ binutils\ChangeLog:
+
+ * readelf.c (get_machine_flags): Set TSO flag.
+
+ gas\ChangeLog:
+
+ * config/tc-riscv.c (riscv_set_tso): Ditto.
+ (riscv_set_arch): Ditto.
+ * testsuite/gas/riscv/ztso.d: New test.
+
+ include\ChangeLog:
+
+ * elf/riscv.h (EF_RISCV_TSO): Ditto.
+
+2022-09-21 Nelson Chu <nelson@rivosinc.com>
+
+ RISC-V: Always generate R_RISCV_CALL_PLT reloc for call in assembler.
+ Since we have the same behaviors of CALL and CALL_PLT relocs in linker for now,
+ https://github.com/bminor/binutils-gdb/commit/3b1450b38c644f99aa2e211747b428b9f8d15cca
+
+ And the psabi already deprecate the CALL reloc,
+ https://github.com/riscv-non-isa/riscv-elf-psabi-doc/commit/a0dced85018d7a0ec17023c9389cbd70b1dbc1b0
+
+ Therefore, we should always generate R_RISCV_CALL_PLT reloc for call, even if
+ it has @plt postfix. I believe LLVM (https://reviews.llvm.org/D132530) already
+ support this, so GNU as should do the same thing.
+
+ gas/
+ * config/tc-riscv.c (riscv_ip): Always generate CALL_PLT reloc for
+ call, even if it has @plt postfix.
+ * testsuite/gas/riscv/no-relax-reloc.d: Updated CALL to CALL_PLT.
+ * testsuite/gas/riscv/relax-reloc.d: Likewise.
+ ld/
+ * testsuite/ld-riscv-elf/variant_cc-r.d: Updated CALL to CALL_PLT.
+
+2022-09-21 GDB Administrator <gdbadmin@sourceware.org>
+
+ Automatic date update in version.in
+
+2022-09-21 Alan Modra <amodra@gmail.com>
+
+ Re: PowerPC64 pcrel got relocs against local symbols
+ The last patch wasn't all that shiny. There are rather a lot more
+ relocations that can hit the assertion in md_apply_fix if the symbol
+ is local or absolute. Fix them all.
+
+ * config/tc-ppc.c (ppc_force_relocation): Add all relocs that
+ expect a symbol in md_apply_fix. Remove tls pcrel relocs
+ already covered in general tls match range.
+
+2022-09-21 Alan Modra <amodra@gmail.com>
+
+ looping in alpha_vms_slurp_relocs
+ The direct cause for the looping was failing to test for error return
+ from _bfd_vms_get_object_record inside a while(1) loop. Fix that.
+ Also record status of first alpha_vms_slurp_relocs call and return
+ that for all subsequent calls. (The object format has one set of
+ relocation records for all sections.) If the first call fails, all
+ others should too.
+
+ * vms-alpha.c (struct vms_private_data_struct): Make reloc_done
+ a tri-state int.
+ (alpha_vms_slurp_relocs): Set reloc_done to 1 on success, -1 on
+ failure. Return that status on subsequent calls. Check
+ _bfd_vms_get_object_record return status.
+ (alpha_vms_get_reloc_upper_bound): Return status from
+ alpha_vms_slurp_relocs.
+ (alpha_vms_write_exec): Exclude sections with contents NULL due
+ to previous errors from layout, and don't try to write them.
+
+2022-09-20 Dmitry Selyutin <ghostmansd@gmail.com>
+
+ ppc/svp64: test setvl ms operand
+
+2022-09-20 Tom Tromey <tom@tromey.com>
+
+ Make stdin_event_handler static
+ I noticed that stdin_event_handler is only used in event-top.c, so
+ this patch changes it to be 'static'.
+
+2022-09-20 Tom Tromey <tromey@adacore.com>
+
+ Constify some target_so_ops instances
+ This changes some target_so_ops instances to be const. This makes
+ their use a little more obvious (they can't be mutated) and also
+ allows for the removal of some initialization code.
+
+ Move solib_ops into gdbarch
+ This changs solib_ops to be an ordinary gdbarch value and updates all
+ the uses. This removes a longstanding FIXME and makes the code
+ somewhat cleaner as well.
+
+ Remove current_target_so_ops
+ current_target_so_ops is only set in a single place. It seems better
+ to simply remove it.
+
+2022-09-20 Andrew Burgess <aburgess@redhat.com>
+
+ gdb/testsuite: add a debuginfod-support.exp helper library
+ We currently have a single test for GDB's debuginfod support, this is
+ gdb.debuginfod/fetch_src_and_symbols.exp, this script does all the
+ setup, starts debuginfod, and then does the testing.
+
+ This commit tries to split the existing script in two, there is a new
+ library lib/debuginfod-support.exp, which contains a helper functions
+ related to running debuginfod tests. All the code in the new library
+ is basically copied from the existing test case (which is why I
+ retained the copyright date range on the new library), with some minor
+ adjustments to try and make the code a little more generic.
+
+ One change I made, for example, is the library offers functions to
+ shut down debuginfod, previously we just relied on expect shutting
+ down debuginfod when dejagnu completed.
+
+ The existing test script is updated to make use of the new library
+ code, and this test is still passing for me. The only change in the
+ test results is a single test where I changed the name to remove the
+ port number from the test name - the port number can change from run
+ to run, so could make it hard to compare test results.
+
+ I have also done a little light house keeping on the original test
+ script, updating and adding new comments, and making use of
+ proc_with_prefix in a couple of places.
+
+2022-09-20 liuzhensong <liuzhensong@loongson.cn>
+
+ LoongArch: Set macro SUB_SEGMENT_ALIGN to 0.
+
+2022-09-20 Nick Clifton <nickc@redhat.com>
+
+ Stop strip from complaining about empty note sections when stripping a binary for a second time.
+ * objcopy.c (copy_object): Do not issue a warning message when
+ encountering empty .gnu.build.attribute sections.
+
+ New Serbian translations for various binutils sub-directories.
+
+2022-09-20 Zeke Lu <lvzecai@gmail.com>
+
+ Bug 29580 - typo in warning message: .note.gnu.build-id data size is too bug
+
+2022-09-20 Xi Ruoyao <xry111@xry111.site>
+
+ LoongArch: Fix R_LARCH_IRELATIVE insertion after elf_link_sort_relocs
+ loongarch_elf_finish_dynamic_symbol is called after elf_link_sort_relocs
+ if -z combreloc. elf_link_sort_relocs redistributes the contents of
+ .rela.* sections those would be merged into .rela.dyn, so the slot for
+ R_LARCH_IRELATIVE may be out of relplt->contents now.
+
+ To make things worse, the boundary check
+
+ dyn < dyn + relplt->size / sizeof (*dyn)
+
+ is obviously wrong ("x + 10 < x"? :), causing the issue undetected
+ during the linking process and the resulted executable suddenly crashes
+ at runtime.
+
+ The issue was found during an attempt to add static-pie support to the
+ toolchain.
+
+ Fix it by iterating through the inputs of .rela.dyn to find the slot.
+
+2022-09-20 Xi Ruoyao <xry111@xry111.site>
+
+ LoongArch: Don't write into GOT for local ifunc
+ Local ifuncs are always resolved at runtime via R_LARCH_IRELATIVE, so
+ there is no need to write anything into GOT. And when we write the GOT
+ we actually trigger a heap-buffer-overflow: If a and b are different
+ sections, we cannot access something in b with "a->contents + (offset
+ from a)" because "a->contents" and "b->contents" are heap buffers
+ allocated separately, not slices of a large buffer.
+
+ So stop writing into GOT for local ifunc now.
+
+2022-09-20 GDB Administrator <gdbadmin@sourceware.org>
+
+ Automatic date update in version.in
+
+2022-09-19 Vladimir Mezentsev <vladimir.mezentsev@oracle.com>
+
+ gprofng: build documentation only if BUILD_MAN is true
+ gprofng/ChangeLog
+ 2022-09-16 Vladimir Mezentsev <vladimir.mezentsev@oracle.com>
+
+ PR gprofng/29476
+ * gprofng/Makefile.am: Build documentation only if BUILD_MAN is true
+ * gprofng/Makefile.in: Rebuild.
+ * gprofng/configure: Rebuild.
+
+2022-09-19 Enze Li <enze.li@hotmail.com>
+
+ gdb: add ATTRIBUTE_PRINTF to gdb_bfd_error_handler
+ I see this error when building with clang,
+
+ CXX gdb_bfd.o
+ gdb_bfd.c:1180:43: error: format string is not a string literal [-Werror,-Wformat-nonliteral]
+ const std::string str = string_vprintf (fmt, ap_copy);
+ ^~~
+ 1 error generated.
+
+ This patch adds missing ATTRIBUTE_PRINTF to fix the error.
+
+ Tested on x86_64-linux with gcc 12 and clang 14.
+
+2022-09-19 GDB Administrator <gdbadmin@sourceware.org>
+
+ Automatic date update in version.in
+
+2022-09-18 GDB Administrator <gdbadmin@sourceware.org>
+
+ Automatic date update in version.in
+
+2022-09-17 Tom de Vries <tdevries@suse.de>
+
+ [gdb/symtab] Fix "file index out of range" complaint
+ With the test-case included in this commit, we run into this FAIL:
+ ...
+ (gdb) p var^M
+ During symbol reading: file index out of range^M
+ $1 = 0^M
+ (gdb) FAIL: gdb.dwarf2/dw2-no-code-cu.exp: p var with no complaints
+ ...
+
+ This is a regression since commit 6d263fe46e0 ("Avoid bad breakpoints with
+ --gc-sections"), which contains this change in read_file_scope:
+ ...
+ - handle_DW_AT_stmt_list (die, cu, fnd, lowpc);
+ + if (lowpc != highpc)
+ + handle_DW_AT_stmt_list (die, cu, fnd, lowpc);
+ ...
+
+ The change intends to avoid a problem with a check in
+ lnp_state_machine::check_line_address, but also prevents the file and dir
+ tables from being read, which causes the complaint.
+
+ Fix the FAIL by reducing the scope of the "lowpc != highpc" condition to the
+ call to dwarf_decode_lines in handle_DW_AT_stmt_list.
+
+ Tested on x86_64-linux.
+
+ Bug: https://sourceware.org/bugzilla/show_bug.cgi?id=29561
+
+2022-09-17 GDB Administrator <gdbadmin@sourceware.org>
+
+ Automatic date update in version.in
+
+2022-09-17 Kevin Buettner <kevinb@redhat.com>
+
+ BFD error message suppression test case
+ This commit adds a GDB test case which tests GDB's BFD error handler
+ hook for suppressing output of all but the first identical messages.
+
+ See the comment at the beginning of bfd-errors.exp for details about
+ this new test.
+
+ I've tested this test for both 32- and 64-bit ELF files and also
+ on both little endian and big endian machines. It also works for
+ both native and remote targets. The only major restriction is that
+ it only works for ELF targets.
+
+2022-09-17 Kevin Buettner <kevinb@redhat.com>
+
+ Suppress printing of superfluous BFD error messages
+ This commit adds a hook to the BFD error handler for suppressing
+ identical messages which have been output once already.
+
+ It's motivated by this Fedora bug...
+
+ https://bugzilla.redhat.com/show_bug.cgi?id=2083315
+
+ ...in which over 900,000 BFD error messages are output when attaching
+ to firefox. From the bug report, the messages all say:
+
+ BFD: /usr/lib/debug/usr/lib64/firefox/libxul.so-100.0-2.fc35.x86_64.debug: attempt to load strings from a non-string section (number 38)
+
+ Since there's no (additional) context which might assist the user in
+ determining what's wrong, there's really no point in outputting more
+ than one message. Of course, if BFD should output some
+ other/different message, it should be output too, but all future
+ messages identical to those already output should be suppressed.
+
+ For the firefox problem, it turned out that there were only 37
+ sections, but something was referring to section #38. I haven't
+ investigated further to find out how this came to be.
+
+ Despite this problem, useful debugging might still be done, especially
+ if the user doesn't care about debugging the problematic library.
+
+ If it turns out that knowing the quantity of messages might be useful,
+ I've implemented the suppression mechanism by keeping a count of each
+ identical message. A new GDB command, perhaps a 'maintenance'
+ command, could be added to print out each message along with the
+ count. I haven't implemented this though because I'm not convinced of
+ its utility. Also, the BFD message printer has support for BFD-
+ specific format specifiers. The BFD message strings that GDB stores
+ in its map are sufficient for distinguishing messages from each
+ other, but are not identical to those output by BFD's default error
+ handler. So, that problem would need to be solved too.
+
+2022-09-16 Tom de Vries <tdevries@suse.de>
+
+ [gdb/symtab] Handle named DW_TAG_unspecified_type DIE
+ With the test-case included in the patch, we run into:
+ ...
+ (gdb) info types -q std::nullptr_t^M
+ During symbol reading: unsupported tag: 'DW_TAG_unspecified_type'^M
+ ^M
+ File /usr/include/c++/7/x86_64-suse-linux/bits/c++config.h:^M
+ 2198: typedef decltype(nullptr) std::nullptr_t;^M
+ (gdb) FAIL: gdb.dwarf2/nullptr_t.exp: info types -q std::nullptr_t \
+ without complaint
+ ...
+
+ Fix the complaint by handling DW_TAG_unspecified_type in new_symbol, and verify
+ in the test-case using "maint print symbols" that the symbol exists.
+
+ Tested on x86_64-linux, with gcc 7.5.0 and clang 13.0.
+
+ Bug: https://sourceware.org/bugzilla/show_bug.cgi?id=17271
+
+2022-09-16 Tom de Vries <tdevries@suse.de>
+
+ [gdb/tdep] Fix PowerPC IEEE 128-bit format arg passing
+ On a powerpc system with gcc 12 built to default to 128-bit IEEE long double,
+ I run into:
+ ...
+ (gdb) print find_max_long_double_real(4, ldc1, ldc2, ldc3, ldc4)^M
+ $8 = 0 + 0i^M
+ (gdb) FAIL: gdb.base/varargs.exp: print \
+ find_max_long_double_real(4, ldc1, ldc2, ldc3, ldc4)
+ ...
+
+ This is due to incorrect handling of the argument in ppc64_sysv_abi_push_param.
+
+ Fix this and similar cases, and expand the test-case to test handling of
+ homogeneous aggregates.
+
+ Tested on ppc64le-linux, power 10.
+
+ Co-Authored-By: Ulrich Weigand <uweigand@de.ibm.com>
+ Tested-by: Carl Love <cel@us.ibm.com>
+ Bug: https://sourceware.org/bugzilla/show_bug.cgi?id=29543
+
+2022-09-16 Tom de Vries <tdevries@suse.de>
+
+ [gdb/testsuite] Fix gdb.dwarf2/dw2-dir-file-name.exp for aarch64
+ [ Another attempt at fixing the problem described in commit cd919f5533c
+ ("[gdb/testsuite] Fix gdb.dwarf2/dw2-dir-file-name.exp"). ]
+
+ When running the test-case gdb.dwarf2/dw2-dir-file-name.exp with
+ aarch64-linux, we run into:
+ ...
+ (gdb) continue^M
+ Continuing.^M
+ ^M
+ Breakpoint 2, compdir_missing__ldir_missing__file_basename () at \
+ tmp-dw2-dir-file-name.c:999^M
+ (gdb) FAIL: gdb.dwarf2/dw2-dir-file-name.exp: \
+ compdir_missing__ldir_missing__file_basename: continue to breakpoint: \
+ compdir_missing__ldir_missing__file_basename
+ ...
+
+ The breakpoint set at compdir_missing__ldir_missing__file_basename_label,
+ address 0x400608 starts at a line entry:
+ ...
+ CU: tmp-dw2-dir-file-name.c:
+ File name Line number Starting address View Stmt
+ tmp-dw2-dir-file-name.c 999 0x400608 x
+ tmp-dw2-dir-file-name.c 1000 0x40062c x
+ tmp-dw2-dir-file-name.c - 0x40062c
+ ...
+ and therefore the breakpoint is printed without instruction address.
+
+ In contrast, for x86_64-linux, we have the breakpoint printed with instruction
+ address:
+ ...
+ (gdb) continue^M
+ Continuing.^M
+ ^M
+ Breakpoint 2, 0x004004c1 in compdir_missing__ldir_missing__file_basename () \
+ at tmp-dw2-dir-file-name.c:999^M
+ (gdb) PASS: gdb.dwarf2/dw2-dir-file-name.exp: \
+ compdir_missing__ldir_missing__file_basename: continue to breakpoint: \
+ compdir_missing__ldir_missing__file_basename
+ ...
+
+ The breakpoint set at compdir_missing__ldir_missing__file_basename_label,
+ address 0x004004c1 doesn't start at a line entry:
+ ...
+ CU: tmp-dw2-dir-file-name.c:
+ File name Line number Starting address View Stmt
+ tmp-dw2-dir-file-name.c 999 0x4004bd x
+ tmp-dw2-dir-file-name.c 1000 0x4004d3 x
+ tmp-dw2-dir-file-name.c - 0x4004d3
+ ...
+
+ Fix this by:
+ - unifying behaviour between the archs by adding an explicit line number entry
+ for the address compdir_missing__ldir_missing__file_basename_label, making
+ the FAIL reproducible on x86_64-linux.
+ - expecting the breakpoint to be printed without instruction address.
+
+ Tested on x86_64-linux and aarch64-linux.
+
+2022-09-16 Tom de Vries <tdevries@suse.de>
+
+ [gdb] Handle pending ^C after rl_callback_read_char
+ In completion tests in various test-cases, we've been running into these
+ "clearing input line" timeouts:
+ ...
+ (gdb) $cmd^GPASS: gdb.gdb/unittest.exp: tab complete "$cmd"
+ FAIL: gdb.gdb/unittest.exp: tab complete "$cmd" (clearing input line) (timeout)
+ ...
+ where $cmd == "maintenance selftest name_that_does_not_exist".
+
+ AFAIU, the following scenario happens:
+ - expect sends "$cmd\t"
+ - gdb detects the stdin event, and calls rl_callback_read_char until it
+ comes to handle \t
+ - readline interprets the \t as completion, tries to complete, fails to do so,
+ outputs a bell (^G)
+ - expect sees the bell, and proceeds to send ^C
+ - readline is still in the call to rl_callback_read_char, and stores the
+ signal in _rl_caught_signal
+ - readline returns from the call to rl_callback_read_char, without having
+ handled _rl_caught_signal
+ - gdb goes to wait for the next event
+ - expect times out waiting for "Quit", the expected reaction for ^C
+
+ Fix this by handling pending signals after each call to rl_callback_read_char.
+
+ The fix is only available for readline 8.x, if --with-system-readline provides
+ an older version, then the fix is disabled due to missing function
+ rl_check_signals.
+
+ Tested on x86_64-linux.
+
+ Bug: https://sourceware.org/bugzilla/show_bug.cgi?id=27813
+
+2022-09-16 Alan Modra <amodra@gmail.com>
+
+ PowerPC64 pcrel got relocs against local symbols
+ Not that anyone would want to indirect via the GOT when an address can
+ be loaded directly with pla, the following:
+
+ pld 3,x@got@pcrel
+ x:
+
+ leads to "Internal error in md_apply_fix", because the generic parts
+ of assembler fixup handling convert the fx_pcrel fixup to one without
+ a symbol. Stop that happening.
+
+ * config/tc-ppc.c (ppc_force_relocation): Add PLT_PCREL34 and
+ assorted GOT_PCREL34 relocs.
+
+2022-09-16 Alan Modra <amodra@gmail.com>
+
+ pdb sanity check block_size
+ * pdb.c (pdb_get_elt_at_index): Only allow block_size to be
+ 512, 1024, 2048, or 4096.
+
+2022-09-16 Nelson Chu <nelson@rivosinc.com>
+
+ RISC-V: Make g imply zmmul extension.
+ bfd/
+ * elfxx-riscv.c (riscv_implicit_subset): Moved entry of m after g,
+ so that g can imply zmmul.
+ gas/
+ * testsuite/gas/riscv/attribute-01.d: Updated.
+ * testsuite/gas/riscv/attribute-02.d: Likewise.
+ * testsuite/gas/riscv/attribute-03.d: Likewise.
+ * testsuite/gas/riscv/attribute-04.d: Likewise.
+ * testsuite/gas/riscv/attribute-05.d: Likewise.
+ * testsuite/gas/riscv/attribute-10.d: Likewise.
+ * testsuite/gas/riscv/march-imply-g.d: Likewise.
+ * testsuite/gas/riscv/march-imply-unsupported.d: Likewise.
+
+2022-09-16 GDB Administrator <gdbadmin@sourceware.org>
+
+ Automatic date update in version.in
+
+2022-09-15 Tsukasa OI <research_trasio@irq.a4lg.com>
+
+ bfd, binutils, gas: Remove/mark unused variables
+ Clang generates a warning on unused (technically, written but not read
+ thereafter) variables. By the default configuration (with "-Werror"), it
+ causes a build failure (unless "--disable-werror" is specified).
+
+ This commit adds ATTRIBUTE_UNUSED attribute to some of them, which means
+ they are *possibly* unused (can be used but no warnings occur when
+ unused) and removes others.
+
+ bfd/ChangeLog:
+
+ * elf32-lm32.c (lm32_elf_size_dynamic_sections): Mark unused
+ rgot_count variable.
+ * elf32-nds32.c (elf32_nds32_unify_relax_group): Remove unused
+ count variable.
+ * mmo.c (mmo_scan): Mark unused lineno variable.
+
+ binutils/ChangeLog:
+
+ * windmc.c (write_rc): Remove unused i variable.
+
+ gas/ChangeLog:
+
+ * config/tc-riscv.c (riscv_ip): Remove unused argnum variable.
+
+ ld/ChangeLog:
+
+ * pe-dll.c (generate_reloc): Remove unused bi and page_count
+ variables.
+
+2022-09-15 Vladimir Mezentsev <vladimir.mezentsev@oracle.com>
+
+ gprofng: fix build issues on musl
+ gprofng/ChangeLog
+ 2022-09-14 Vladimir Mezentsev <vladimir.mezentsev@oracle.com>
+
+ PR gprofng/29477
+ * configure.ac: Set __MUSL_LIBC.
+ * configure: Rebuild.
+ * common/config.h.in: Rebuild.
+ * src/collector_module.h: Fix compiler errors because mmap64, open64,
+ pwrite64 are macros and getcontext() is absent on musl.
+ * libcollector/collector.c: Likewise.
+ * libcollector/hwprofile.c: Likewise.
+ * libcollector/iolib.c: Likewise.
+ * libcollector/libcol_util.c: Likewise.
+ * libcollector/linetrace.c: Likewise.
+ * libcollector/memmgr.c: Likewise.
+ * libcollector/profile.c: Likewise.
+ * libcollector/unwind.c: Likewise.
+ * libcollector/dispatcher.c: Likewise.
+ * src/Experiment.cc: Likewise.
+ * libcollector/collector.h: Use dlsym() because dlvsym() is not defined
+ on musl.
+ * libcollector/iotrace.c: Remove interposition of versioned functions.
+ * libcollector/mmaptrace.c: Likewise.
+ * libcollector/libcol_util.h: Fix -Wint-to-pointer-cast warnings.
+ * libcollector/jprofile.c: Likewise.
+ * libcollector/synctrace.c: Include "collector.h".
+ * src/Print.cc: Use get_basename() because basename() is not defined
+ on musl.
+ * common/hwcdrv.c: Fix -Wformat= warnings.
+
+2022-09-15 GDB Administrator <gdbadmin@sourceware.org>
+
+ Automatic date update in version.in
+
+2022-09-14 Rupesh Potharla <Rupesh.Potharla@amd.com>
+
+ Binutils: Readelf testcase failing with clang
+ * testsuite/binutils-all/readelf.exp (readelf_wi_test): Extend
+ regexps to allow for output genreated by the Clang compiler.
+
+2022-09-14 Alan Modra <amodra@gmail.com>
+
+ looping in bfd_mach_o_fat_openr_next_archived_file
+ mach-o.c doesn't sanity check mach-o-fat archives, making it easy for
+ fuzzers to create an archive with mach_o_fat_archentry headers that
+ point to the same offset. bfd_mach_o_fat_openr_next_archived_file
+ uses the previous element offset to find its header, and thus the next
+ element. If two offsets are the same, any tool reading the archive
+ will get stuck. This patch rejects such archives, and any with
+ overlapping elements.
+
+ * mach-o.c (overlap_previous): New function.
+ (bfd_mach_o_fat_archive_p): Sanity check that elements do not
+ overlap each other or the file and archive headers.
+
+2022-09-14 Alan Modra <amodra@gmail.com>
+
+ regen pofiles
+
+2022-09-14 Tsukasa OI <research_trasio@irq.a4lg.com>
+
+ bfd: Stop using -Wstack-usage=262144 when built with Clang
+ Some components of GNU Binutils will pass "-Wstack-usage=262144" when
+ "GCC >= 5.0" is detected. However, Clang does not support "-Wstack-usage",
+ despite that related configuration part in bfd/warning.m4 handles the latest
+ Clang (15.0.0 as of this writing) as "GCC >= 5.0".
+
+ The option "-Wstack-usage" was ignored when the first version of Clang is
+ released but even this "ignoring" behavior is removed before Clang 4.0.0.
+ So, if we give Clang "-Wstack-usage=262144", it generates a warning, making
+ the build failure.
+
+ This commit checks "__clang__" macro to prevent adding the option if the
+ compiler is identified as Clang.
+
+ bfd/ChangeLog:
+
+ * warning.m4: Stop appending "-Wstack-usage=262144" option when
+ compiled with Clang.
+ * configure: Regenerate.
+
+ binutils/ChangeLog:
+
+ * configure: Regenerate.
+
+ gas/ChangeLog:
+
+ * configure: Regenerate.
+
+ gold/ChangeLog:
+
+ * configure: Regenerate.
+
+ gprof/ChangeLog:
+
+ * configure: Regenerate.
+
+ ld/ChangeLog:
+
+ * configure: Regenerate.
+
+ opcodes/ChangeLog:
+
+ * configure: Regenerate.
+
+2022-09-14 Alan Modra <amodra@gmail.com>
+
+ Modify ld-ctf test files to suit ARM
+ The "@" char starts a comment on ARM.
+
+ * testsuite/ld-ctf/diag-ctf-version-0.s: Replace @progbits with
+ %progbits.
+ * testsuite/ld-ctf/diag-ctf-version-2-unsupported-feature.s: Likewise.
+ * testsuite/ld-ctf/diag-ctf-version-f.s: Likewise.
+ * testsuite/ld-ctf/diag-cttname-invalid.s: Likewise.
+ * testsuite/ld-ctf/diag-cttname-null.s: Likewise.
+ * testsuite/ld-ctf/diag-cuname.s: Likewise.
+ * testsuite/ld-ctf/diag-decompression-failure.s: Likewise.
+ * testsuite/ld-ctf/diag-parlabel.s: Likewise.
+ * testsuite/ld-ctf/diag-parname.s: Likewise.
+ * testsuite/ld-ctf/diag-strlen-invalid.s: Likewise.
+ * testsuite/ld-ctf/diag-unsupported-flag.s: Likewise.
+ * testsuite/ld-ctf/diag-wrong-magic-number.s: Likewise.
+
+2022-09-14 Alan Modra <amodra@gmail.com>
+
+ asan: som_set_reloc_info heap buffer overflow
+ Also a bugfix. The first time the section was read, the contents
+ didn't supply an addend.
+
+ * som.c (som_set_reloc_info): Sanity check offset. Do process
+ contents after reading. Tidy section->contents after freeing.
+
+2022-09-14 Alan Modra <amodra@gmail.com>
+
+ ubsan: som_is_space null dereference
+ On objcopy of fuzzed file.
+
+ * som.c (som_write_fixups): Exit loop if space sections all
+ processed.
+
+2022-09-14 Alan Modra <amodra@gmail.com>
+
+ msan: vms-alpha use-of-uninitialized-value in dst_retrieve_location
+ * vms-alpha.c (dst_define_location): Init any unused entries.
+
+2022-09-14 Alan Modra <amodra@gmail.com>
+
+ ubsan: arm-dis.c index out of bounds
+ We are way off in the weeds with this one, and will be printing
+ <UNPREDICTABLE> for S > 10.
+
+ * arm-dis.c (print_insn_cde): Wrap 'T' value.
+
+2022-09-14 Alan Modra <amodra@gmail.com>
+
+ PR29540, R_PPC64_NONE in .rela.dyn when linking Linux vdso
+ PR 29540
+ * elf64-ppc.c (allocate_dynrelocs): Don't alloc space for relocs
+ against discarded sections.
+ (ppc64_elf_size_dynamic_sections): Use standard test for discarded
+ sections.
+ * elf32-ppc.c (allocate_dynrelocs): Don't alloc space for relocs
+ against discarded sections.
+ (ppc_elf_size_dynamic_sections): Use standard test for discarded
+ sections.
+
+2022-09-14 GDB Administrator <gdbadmin@sourceware.org>
+
+ Automatic date update in version.in
+
+2022-09-13 Aaron Merey <amerey@redhat.com>
+
+ objdump: '-S' should trigger search for separate debuginfo.
+ Add with_source_code to the command line options that trigger
+ might_need_separate_debug_info and dump_any_debugging. This helps
+ 'objdump -S' download missing files via debuginfod without the need for
+ specifying extra command line options like '-L'.
+
+2022-09-13 Bruno Larsen <blarsen@redhat.com>
+
+ gdb/testsuite: Update gdb.base/so-impl-ld.exp
+ gdb.base/so-impl-ld.exp was setup assuming that the compiler would add
+ epilogue information and that GDB would stop in the } line. This would
+ make clang tests fail like so:
+
+ step^M
+ solib_main (arg=10000) at ../../../common/git-repos/binutils-gdb/gdb/testsuite/gdb.base/solib1.c:7^M
+ 7|__ return arg*arg;|__|___/* HERE */^M
+ (gdb) PASS: gdb.base/so-impl-ld.exp: step into solib call
+ next^M
+ main () at ../../../common/git-repos/binutils-gdb/gdb/testsuite/gdb.base/so-impl-ld.c:22^M
+ 22|_ return 0;^M
+ (gdb) FAIL: gdb.base/so-impl-ld.exp: step in solib call
+ next^M
+ 0x00007ffff7cef560 in __libc_start_call_main () from /lib64/libc.so.6^M
+ (gdb) FAIL: gdb.base/so-impl-ld.exp: step out of solib call
+
+ This patch changes it so solib_main has 2 lines where GDB can stop
+ regardless of compiler choices, and updates the exp file to
+ generically deal with unknown number of steps until leaving that
+ function.
+
+2022-09-13 Bruno Larsen <blarsen@redhat.com>
+
+ gdb/testsuite: introduce gdb_step_until
+ Currently, GDB's testsuite uses a set amount of step commands to exit
+ functions. This is a problem if a compiler emits different epilogue
+ information from gcc, or emits no epilogue information at all. It was
+ most noticeable if Clang was used to test GDB.
+
+ To fix this unreliability, this commit introduces a new proc that will
+ step the inferior until it is stopped at a line that matches the given
+ regexp, or until it steps too many times - defined as an optional
+ argument. If the line is found, it shows up as a single PASS in the
+ test, and if the line is not found, a single FAIL is emitted.
+
+ This patch only introduces this proc, but does not add it to any
+ existing tests, these will be introduced in the following commit.
+
+2022-09-13 Bruno Larsen <blarsen@redhat.com>
+
+ explicitly test for stderr in gdb.base/dprintf.exp
+ Not all compilers add stderr debug information when compiling a
+ program. Clang, for instance, prefers to add nothing from standard
+ libraries and let an external debug package have this information.
+ Because of this, gdb.base/dprintf.exp was failing when GDB attempted to
+ use dprintf as a call to fprintf(stderrr, ...), like this:
+
+ (gdb) PASS: gdb.base/dprintf.exp: call: fprintf: set dprintf style to call
+ continue
+ Continuing.
+ kickoff 1234
+ also to stderr 1234
+ 'stderr' has unknown type; cast it to its declared type
+ (gdb) FAIL: gdb.base/dprintf.exp: call: fprintf: 1st dprintf (timeout)
+
+ To avoid this false positive, we explicitly test to see if
+ the compiler has added information about stderr at all, and abort
+ testing dprintf as an fprintf call if it is unavailable.
+
+2022-09-13 Mark Harmstone <mark@harmstone.com>
+
+ Add pdb archive format
+ Resubmitted with changes in
+ https://sourceware.org/pipermail/binutils/2022-September/122791.html
+ made.
+
+2022-09-13 Jiangshuai Li <jiangshuai_li@linux.alibaba.com>
+
+ gdb/csky rm csky_print_registers_info
+ The reason for implementing this interface is that we want to print
+ GPR, PC, EPC, PSR and EPSR when the "info register" command
+ is executed.
+
+ A prev patch has added PC, EPC, PSR and EPSR to reggroup
+ general_group, the purpose has been achieved, so this function is
+ no longer required.
+
+2022-09-13 Jiangshuai Li <jiangshuai_li@linux.alibaba.com>
+
+ gdb/csky rm csky_memory_insert/remove_breakpoint
+ Software breakpoints are inserted or removed by the gdb stub via
+ remote protocol, these two functions are no longer needed.
+
+2022-09-13 Jiangshuai Li <jiangshuai_li@linux.alibaba.com>
+
+ gdb/csky add unwinder for long branch cases
+ There are two sequences of instructions for long branch:
+ 1. jmpi [pc+4] //insn code: 0xeac00001
+ .long addr
+
+ 2. lrw t1, [pc+8] //insn code: 0xea8d0002
+ jmp t1 //insn code: 0x7834
+ nop //insn code: 0x6c03
+ .long addr
+
+2022-09-13 Jiangshuai Li <jiangshuai_li@linux.alibaba.com>
+
+ gdbserver/csky add csky gdbserver support
+ Add new files:
+ gdb/arch/csky.c
+ gdb/arch/csky.h
+ gdb/features/cskyv2-linux.c
+ gdbserver/linux-csky-low.cc
+
+ 1. In gdb/arch/csky.c file, add function "csky_create_target_description()"
+ for csky_target::low_arch_setup(). later, it can be used for csky native gdb.
+
+ 2. In gdb/features/cskyv2-linux.c file, create target_tdesc for csky, include
+ gprs, pc, hi, lo, float, vector and float control registers.
+
+ 3. In gdbserver/linux-csky-low.cc file, using PTRACE_GET/SET_RGESET to
+ get/set registers. The main data structures in asm/ptrace.h are:
+ struct pt_regs {
+ unsigned long tls;
+ unsigned long lr;
+ unsigned long pc;
+ unsigned long sr;
+ unsigned long usp;
+
+ /*
+ * a0, a1, a2, a3:
+ * r0, r1, r2, r3
+ */
+ unsigned long orig_a0;
+ unsigned long a0;
+ unsigned long a1;
+ unsigned long a2;
+ unsigned long a3;
+
+ /*
+ * r4 ~ r13
+ */
+ unsigned long regs[10];
+
+ /* r16 ~ r30 */
+ unsigned long exregs[15];
+
+ unsigned long rhi;
+ unsigned long rlo;
+ unsigned long dcsr;
+ };
+
+ struct user_fp {
+ unsigned long vr[96];
+ unsigned long fcr;
+ unsigned long fesr;
+ unsigned long fid;
+ unsigned long reserved;
+ };
+
+2022-09-13 GDB Administrator <gdbadmin@sourceware.org>
+
+ Automatic date update in version.in
+
+2022-09-12 Tom Tromey <tromey@adacore.com>
+
+ Use checked_static_cast in more places
+ I went through all the uses of dynamic_cast<> in gdb, looking for ones
+ that could be replaced with checked_static_cast. This patch is the
+ result. Regression tested on x86-64 Fedora 34.
+
+2022-09-12 Peter Bergner <bergner@linux.ibm.com>
+
+ ppc: Document the -mfuture and -Mfuture options and make them usable
+ The -mfuture and -Mfuture options which are used for adding potential
+ new ISA instructions were not documented. They also lacked a bitmask
+ so new instructions could not be enabled by those options. Fixed.
+
+ binutils/
+ * doc/binutils.texi: Document -Mfuture.
+
+ gas/
+ * config/tc-ppc.c: Document -mfuture
+ * doc/c-ppc.texi: Likewise.
+
+ include/
+ * opcode/ppc.h (PPC_OPCODE_FUTURE): Define.
+
+ opcodes/
+ * ppc-dis.c (ppc_opts) <future>: Use it.
+ * ppc-opc.c (FUTURE): Define.
+
+2022-09-12 Bruno Larsen <blarsen@redhat.com>
+
+ add xfails to gdb.base/complex-parts.exp when testing with clang
+ clang doesn't add encoding to the name of complex variables, only says
+ that the type name is complex, making the relevant tests fail.
+ This patch adds the xfails to the tests that expect the variable name to
+ include it.
+
+2022-09-12 Bruno Larsen <blarsen@redhat.com>
+
+ Fix gdb.base/call-ar-st to work with Clang
+ When running gdb.base/call-ar-st.exp against Clang, we see one FAIL,
+ like so:
+
+ print_all_arrays (array_i=<main.integer_array>, array_c=<main.char_array> "ZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZa
+ ZaZaZaZaZaZaZaZaZaZaZaZa", array_f=<main.float_array>, array_d=<main.double_array>) at ../../../src/gdb/testsuite/gdb.base/call-ar-st.c:274
+ 274 print_int_array(array_i); /* -step1- */
+ (gdb) FAIL: gdb.base/call-ar-st.exp: step inside print_all_arrays
+
+ With GCC we instead see:
+
+ print_all_arrays (array_i=<integer_array>, array_c=<char_array> "ZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZa", array_f=<float_array>, array_d=<double_array>) at /home/pedro/gdb/build/gdb/testsuite/../../../src/gdb/testsuite/gdb.base/call-ar-st.c:274
+ 274 print_int_array(array_i); /* -step1- */
+ (gdb) PASS: gdb.base/call-ar-st.exp: step inside print_all_arrays
+
+ The difference is that with Clang we get:
+
+ array_i=<main.integer_array>, ...
+
+ instead of
+
+ array_i = <integer_array>, ...
+
+ These symbols are local static variables, and "main" is the name of
+ the function they are defined in. GCC instead appends a sequence
+ number to the linkage name:
+
+ $ nm -A call-ar-st.gcc | grep integer_
+ call-ar-st/call-ar-st:00000000000061a0 b integer_array.3968
+
+ $ nm -A call-ar-st.clang | grep integer_
+ call-ar-st:00000000004061a0 b main.integer_array
+
+ This commit changes the testcase to accept both outputs, as they are
+ functionally identical.
+
+ Co-Authored-By: Pedro Alves <pedro@palves.net>
+ Change-Id: Iaf2ccdb9d5996e0268ed12f595a6e04b368bfcb4
+
+2022-09-12 Bruno Larsen <blarsen@redhat.com>
+
+ fix gdb.base/access-mem-running.exp for clang testing
+ Clang was optimizing global_var away because it was not being used
+ anywhere. this commit fixes that by adding the attribute used it.
+
+ update gdb.base/info-program.exp to not fail with clang
+ The test specifically mentions that it doesn't care where the program
+ stops, however it was still testing for a specific location. The clang
+ compiler emits different line information for epilogue, so GDB reports a
+ different stopping location, depending on the used compiler. With this
+ patch the test works even with clang.
+
+2022-09-12 Bruno Larsen <blarsen@redhat.com>
+
+ gdb/testsuite: change gdb.base/nodebug.exp to not fail with clang
+ Clang organizes the variables differently to gcc in the original version
+ of this code, leading to the following differences when testing
+ p (int*) &dataglobal + 1
+
+ gcc:
+ $16 = (int *) 0x404034 <datalocal>
+
+ clang:
+ $16 = (int *) 0x404034 <dataglobal8>
+
+ However, since the important part of this test doesn't seem to be which
+ symbol is linked, but rather if GDB is correctly increasing the
+ address. This test was changed to actually measure address changes,
+ instead of assuming the ordering and naming of symbols.
+
+ Co-Authored-By: Andrew Burgess <aburgess@redhat.com>
+
+2022-09-12 Martin Storsjö <martin@martin.st>
+
+ ld: pe: Apply review suggestions on the existing exports/imports arrays
+ Use a separate explicit max_exports/imports field, instead of
+ deducing it from the number of allocated elements. Use a named
+ constant for the incremental growth of the array.
+
+ Use bool instead of int for boolean values.
+
+ Remove an unnecessary if statement/scope in the def_file_free
+ function.
+
+ Add more verbose comments about parameters, and about insertion
+ into an array of structs.
+
+ Generally use unsigned integers for all array indices and sizes.
+ The num_exports/imports fields are kept as is as signed integers,
+ since changing them to unsigned would require a disproportionate
+ amount of changes ti pe-dll.c to avoid comparisons between signed
+ and unsigned.
+
+ Simply use xrealloc instead of a check and xmalloc/xrealloc;
+ xrealloc can take NULL as the first parameter (and does a similar
+ check internally). (This wasn't requested in review though,
+ but noticed while working on the code.)
+
+2022-09-12 Martin Storsjö <martin@martin.st>
+
+ ld: pe: Improve performance of object file exclude symbol directives
+ Store the list of excluded symbols in a sorted list, speeding up
+ checking for duplicates when inserting new entries.
+
+ This is done in the same way as is done for exports and imports
+ (while the previous implementation was done with a linked list,
+ based on the implementation for aligncomm).
+
+ When linking object files with excluded symbols, there can potentially
+ be very large numbers of excluded symbols (just like builds with
+ exports can have a large number of exported symbols).
+
+ This improves the link performance somewhat, when linking with large
+ numbers of excluded symbols.
+
+ The later actual use of the excluded symbols within pe-dll.c
+ handles them via an unordered linked list still, though.
+
+2022-09-12 Tom de Vries <tdevries@suse.de>
+
+ [gdb] Fix abort in selftest run_on_main_thread with ^C
+ When running selftest run_on_main_thread and pressing ^C, we can run into:
+ ...
+ Running selftest run_on_main_thread.
+ terminate called without an active exception
+
+ Fatal signal: Aborted
+ ...
+
+ The selftest function looks like this:
+ ...
+ static void
+ run_tests ()
+ {
+ std::thread thread;
+
+ done = false;
+
+ {
+ gdb::block_signals blocker;
+
+ thread = std::thread (set_done);
+ }
+
+ while (!done && gdb_do_one_event () >= 0)
+ ;
+
+ /* Actually the test will just hang, but we want to test
+ something. */
+ SELF_CHECK (done);
+
+ thread.join ();
+ }
+ ...
+
+ The error message we see is due to the destructor of thread being called while
+ thread is joinable.
+
+ This is supposed to be taken care of by thread.join (), but the ^C prevents
+ that one from being called, while the destructor is still called.
+
+ Fix this by ensuring thread.join () is called (if indeed required) before the
+ destructor using SCOPE_EXIT.
+
+ Tested on x86_64-linux.
+
+ Bug: https://sourceware.org/bugzilla/show_bug.cgi?id=29549
+
+2022-09-12 Tom de Vries <tdevries@suse.de>
+
+ [gdb/symtab] Support .gdb_index section with TUs in .debug_info
+ The .gdb_index variant of commit d878bb39e41 ("[gdb/symtab] Support
+ .debug_names section with TUs in .debug_info").
+
+ Tested on x86_64-linux.
+
+2022-09-12 Tom de Vries <tdevries@suse.de>
+
+ [gdb/testsuite] Fix gdb.dwarf2/dw2-dir-file-name.exp for ppc64le
+ In commit cd919f5533c ("[gdb/testsuite] Fix
+ gdb.dwarf2/dw2-dir-file-name.exp"), I made gdb.dwarf2/dw2-dir-file-name.exp
+ independent of prologue analyzers, using this change:
+ ...
+ - gdb_breakpoint $func
+ + gdb_breakpoint *$func
+ ...
+
+ That however caused a regression on ppc64le. For PowerPC, as described in the
+ ELFv2 ABI, a function can have a global and local entry point.
+
+ Setting a breakpoint on *$func effectively creates a breakpoint for the global
+ entry point, so if the function is entered through the local entry point, the
+ breakpoint doesn't trigger.
+
+ Fix this by reverting commit cd919f5533c, and setting the breakpoint on
+ ${func}_label instead.
+
+ Tested on x86_64-linux and ppc64le-linux.
+
+2022-09-12 Tom de Vries <tdevries@suse.de>
+
+ [gdb/testsuite] Fix gdb.dwarf2/dw2-dir-file-name.exp with clang
+ When running test-case gdb.dwarf2/dw2-dir-file-name.exp with clang, we run
+ into:
+ ...
+ (gdb) break *compdir_missing__ldir_missing__file_basename^M
+ Breakpoint 2 at 0x400580^M
+ (gdb) continue^M
+ Continuing.^M
+ ^M
+ Breakpoint 2, 0x0000000000400580 in \
+ compdir_missing.ldir_missing.file_basename ()^M
+ (gdb) FAIL: gdb.dwarf2/dw2-dir-file-name.exp: \
+ compdir_missing__ldir_missing__file_basename: continue to breakpoint: \
+ compdir_missing__ldir_missing__file_basename
+ ...
+
+ The problem is that the test-case uses labels outside functions, which is know
+ to cause problem with clang, as documented in the comment for proc
+ function_range.
+
+ Fix this by using get_func_info instead.
+
+ Tested on x86_64-linux, with both gcc 7.5.0 and clang 13.0.0.
+
+2022-09-12 Jan Beulich <jbeulich@suse.com>
+
+ x86: avoid i386_dis_printf()'s staging area for a fair part of output
+ While PR binutils/29483 has now been addressed differently, this
+ originally proposed change still has its merits: Avoiding vsnprintf()
+ for typically far more than half of the overall output results in a 2-3%
+ performance gain in my testing (with debug builds of objdump, libbfd,
+ and libopcodes).
+
+ With that part of output no longer using staging_area[], the array also
+ doesn't need to be quite as large anymore (the largest presently used
+ size is 27, from "64-bit address is disabled").
+
+ While limiting the scope of "res" it became apparent that
+ - no caller cares about the function's return value,
+ - the comment about the return value was wrong,
+ - a particular positive return value would have been meaningless to the
+ caller.
+ Therefore convert the function to return "void" at the same time.
+
+2022-09-12 Nelson Chu <nelson@rivosinc.com>
+
+ RISC-V: PR28509, the default visibility symbol cannot be referenced by R_RISCV_JAL.
+ When generating the shared object, the default visibility symbols may bind
+ externally, which means they will be exported to the dynamic symbol table,
+ and are preemptible by default. These symbols cannot be referenced by the
+ non-pic R_RISCV_JAL and R_RISCV_RVC_JUMP. However, consider that linker
+ may relax the R_RISCV_CALL relocations to R_RISCV_JAL or R_RISCV_RVC_JUMP,
+ if these relocations are relocated to the plt entries, then we won't report
+ error for them. Perhaps we also need the similar checks for the
+ R_RISCV_BRANCH and R_RISCV_RVC_BRANCH relocations.
+
+ After applying this patch, and revert the following glibc patch,
+ riscv: Fix incorrect jal with HIDDEN_JUMPTARGET
+ https://sourceware.org/git/?p=glibc.git;a=commit;h=68389203832ab39dd0dbaabbc4059e7fff51c29b
+
+ I get the expected errors as follows,
+ ld: relocation R_RISCV_RVC_JUMP against `__sigsetjmp' which may bind externally can not be used when making a shared object; recompile with -fPIC
+ ld: relocation R_RISCV_JAL against `exit' which may bind externally can not be used when making a shared object; recompile with -fPIC
+
+ Besides, we also have similar changes for libgcc,
+ RISC-V: jal cannot refer to a default visibility symbol for shared object
+ https://github.com/gcc-mirror/gcc/commit/45116f342057b7facecd3d05c2091ce3a77eda59
+
+ bfd/
+ pr 28509
+ * elfnn-riscv.c (riscv_elf_relocate_section): Report errors when
+ makeing a shard object, and the referenced symbols of R_RISCV_JAL
+ relocations are default visibility. Besides, we should handle most
+ of the cases here, so don't need the unresolvable check later for
+ R_RISCV_JAL and R_RISCV_RVC_JUMP.
+ ld/
+ pr 28509
+ * testsuite/ld-riscv-elf/ld-riscv-elf.exp: Updated.
+ * testsuite/ld-riscv-elf/lib-nopic-01a.s: Removed.
+ * testsuite/ld-riscv-elf/lib-nopic-01b.d: Likewise.
+ * testsuite/ld-riscv-elf/lib-nopic-01b.s: Likewise.
+ * testsuite/ld-riscv-elf/shared-lib-nopic-01.d: New testcase.
+ * testsuite/ld-riscv-elf/shared-lib-nopic-01.s: Likewise.
+ * testsuite/ld-riscv-elf/shared-lib-nopic-02.d: Likewise.
+ * testsuite/ld-riscv-elf/shared-lib-nopic-02.s: Likewise.
+ * testsuite/ld-riscv-elf/shared-lib-nopic-03.d: Likewise.
+ * testsuite/ld-riscv-elf/shared-lib-nopic-03.s: Likewise.
+ * testsuite/ld-riscv-elf/shared-lib-nopic-04.d: Likewise.
+ * testsuite/ld-riscv-elf/shared-lib-nopic-04.s: Likewise.
+
+2022-09-12 GDB Administrator <gdbadmin@sourceware.org>
+
+ Automatic date update in version.in
+
+2022-09-11 Tom de Vries <tdevries@suse.de>
+
+ [gdb/symtab] Fix handling of DW_TAG_unspecified_type
+ Currently, the test-case contained in this patch fails:
+ ...
+ (gdb) p (int) foo ()^M
+ Invalid cast.^M
+ (gdb) FAIL: gdb.dwarf2/dw2-unspecified-type.exp: p (int) foo ()
+ ...
+ because DW_TAG_unspecified_type is translated as void.
+
+ There's some code in read_unspecified_type that marks the type as stub, but
+ that's only active for ada:
+ ...
+ if (cu->lang () == language_ada)
+ type->set_is_stub (true);
+ ...
+
+ Fix this by:
+ - marking the type as a stub for all languages, and
+ - handling the stub return type case in call_function_by_hand_dummy.
+
+ Tested on x86_64-linux.
+
+ Bug: https://sourceware.org/bugzilla/show_bug.cgi?id=29558
+
+2022-09-11 GDB Administrator <gdbadmin@sourceware.org>
+
+ Automatic date update in version.in
+
+2022-09-10 Alan Modra <amodra@gmail.com>
+
+ Re: PR29466, APP/NO_APP with linefile
+ It looks like I copied the SIZE init across from
+ binutils/testsuite/config/default.exp without some necessary editing.
+
+ * testsuite/config/default.exp (SIZE): Adjust relative path.
+
+2022-09-10 GDB Administrator <gdbadmin@sourceware.org>
+
+ Automatic date update in version.in
+
+2022-09-09 Nick Clifton <nickc@redhat.com>
+
+ Support debuginfo files with empty group sections.
+ PR 29532
+ bfd * elf.c (setup_group): Do not return false if there is no group
+ information available.
+
+ bionutils* objcopy.c (setup_section): Leave group sections intact when
+ creating separate debuginfo files.
+
+2022-09-09 Tsukasa OI <research_trasio@irq.a4lg.com>
+
+ RISC-V: Fix vector CSR requirements
+ Vector CSRs are also required on smaller vector subsets.
+
+ Not only that the most of vector CSRs are general purpose (and must be
+ accessible for every vector subsets), current minimum vector subset 'Zve32x'
+ requires fixed point arithmetic, making remaining non-general purpose
+ (fixed point arithmetic only) CSRs mandatory for such subsets.
+
+ So, those CSRs must be accessible from 'Zve32x', not just from 'V'.
+ This commit fixes this issue which caused CSR accessibility warnings.
+
+ gas/ChangeLog:
+
+ * config/tc-riscv.c (riscv_csr_address): Change vector CSR
+ requirement from 'V' to 'Zve32x'.
+ * testsuite/gas/riscv/csr-version-1p9p1.l: Change vector CSR
+ requirement from 'V' to 'Zve32x'.
+ * testsuite/gas/riscv/csr-version-1p10.l: Likewise.
+ * testsuite/gas/riscv/csr-version-1p11.l: Likewise.
+ * testsuite/gas/riscv/csr-version-1p12.l: Likewise.
+
+2022-09-09 GDB Administrator <gdbadmin@sourceware.org>
+
+ Automatic date update in version.in
+
+2022-09-08 Carl Love <cel@us.ibm.com>
+
+ Fix hardware watchpoint check in test gdb.base/watchpoint-reuse-slot.exp
+ This test generates 48 failures on Power 9 when testing with HW watchpoints
+ enabled. Note HW watchpoint support is disabled on Power 9 due to a HW bug.
+ The skip_hw_watchpoint_tests proc must be used to correctly determine
+ if the processor supports HW watchpoints.
+
+ This patch replaces the [target_info exists gdb,no_hardware_watchpoints]
+ with the skip_hw_watchpoint_tests check.
+
+ This patch was tested on Power 9, Power 10 and X86-64 with no regressions.
+
+2022-09-08 Nick Clifton <nickc@redhat.com>
+
+ Gas generated incorrect debug info (top-level DW_TAG_unspecified_type DIE)
+ PR 29559
+ * dwarf2dbg.c (out_debug_info): Place DW_TAG_unspecified_type at
+ the end of the list of children, not at the start of the CU
+ information.
+ * testsuite/gas/elf/dwarf-3-func.d: Update expected output.
+ * testsuite/gas/elf/dwarf-5-func-global.d: Likewise.
+ * testsuite/gas/elf/dwarf-5-func-local.d: Likewise.
+ * testsuite/gas/elf/dwarf-5-func.d: Likewise.
+
+2022-09-08 Tsukasa OI <research_trasio@irq.a4lg.com>
+
+ gdbsupport: Fix config.status dependency
+ Commit 171fba11ab27 ("Make GDBserver abort on internal error in development mode")
+ created a new substitution CONFIG_STATUS_DEPENDENCIES but this is used by
+ Makefile.in (which is not regenerated by that commit). After regenerating
+ it, it is found that CONFIG_STATUS_DEPENDENCIES value is not valid, making
+ gdbsupport fail to build.
+
+ Since the CONFIG_STATUS_DEPENDENCIES value is used in the Makefile, macro
+ substitution must have a Makefile format but commit 171fba11ab27 used shell
+ format "$srcdir/../bfd/development.sh".
+
+ This commit fixes this issue by substituting "$srcdir" (shell format) to
+ "$(srcdir)" (Makefile format). It preserves the dependency as Pedro
+ intended and fixes the build problem.
+
+ It also regenerates corresponding files with the maintainer mode.
+
+ gdbsupport/ChangeLog:
+
+ * configure.ac: Fix config.status dependency.
+ * Makefile.in: Regenerate.
+ * configure: Regenerate.
+
+2022-09-08 Nick Clifton <nickc@redhat.com>
+
+ Maintainer mode: wrong gettext version?
+ * README-maintainer-mode: Update minimum version of gettext
+ required.
+
+ i686-w64-mingw32-objdump -WL returns incorrect file paths
+ PR 29523
+ * dwarf.c (display_debug_lines_decoded): Correctly handle DWARF-5
+ directory and filename tables.
+
+2022-09-08 GDB Administrator <gdbadmin@sourceware.org>
+
+ Automatic date update in version.in
+
+2022-09-07 Tom de Vries <tdevries@suse.de>
+
+ [gdb/testsuite] xfail gdb.ada/O2_float_param.exp for aarch64 and gcc 7.5.0
+ On aarch64-linux, with gcc 7.5.0, we run into:
+ ...
+ (gdb) frame^M
+ #0 callee.increment (val=99.0, val@entry=9.18340949e-41, msg=...) at \
+ callee.adb:21^M
+ 21 if Val > 200.0 then^M
+ (gdb) FAIL: gdb.ada/O2_float_param.exp: scenario=all: frame
+ ...
+
+ The problem is a GCC bug, filed as "PR98148 - [AArch64] Wrong location
+ expression for function entry values" (
+ https://gcc.gnu.org/bugzilla/show_bug.cgi?id=98148 ).
+
+ Xfail the test for aarch64 and gcc 7.
+
+ Tested on x86_64-linux and aarch64-linux.
+
+ Bug: https://sourceware.org/bugzilla/show_bug.cgi?id=29418
+
+2022-09-07 Tom de Vries <tdevries@suse.de>
+
+ [gdb/testsuite] Fix gdb.ada/access_tagged_param.exp for aarch64
+ On aarch64-linux, I run into:
+ ...
+ Breakpoint 2, pck.inspect (obj=0x430eb0 \
+ <system.pool_global.global_pool_object>, <objL>=0) at pck.adb:17^M
+ 17 procedure Inspect (Obj: access Top_T'Class) is^M
+ (gdb) FAIL: gdb.ada/access_tagged_param.exp: continue
+ ...
+ while on x86_64-linux, I see:
+ ...
+ Breakpoint 2, pck.inspect (obj=0x62b2a0, <objL>=2) at pck.adb:19^M
+ 19 null;^M
+ (gdb) PASS: gdb.ada/access_tagged_param.exp: continue
+ ...
+ Note the different line numbers, 17 vs 19.
+
+ The difference comes from the gdbarch_skip_prologue implementation.
+
+ The amd64_skip_prologue implementation doesn't use gcc line numbers, and falls
+ back to the architecture-specific prologue analyzer, which correctly skips
+ past the prologue, to address 0x4022f7:
+ ...
+ 00000000004022ec <pck__inspect>:
+ 4022ec: 55 push %rbp
+ 4022ed: 48 89 e5 mov %rsp,%rbp
+ 4022f0: 48 89 7d f8 mov %rdi,-0x8(%rbp)
+ 4022f4: 89 75 f4 mov %esi,-0xc(%rbp)
+ 4022f7: 90 nop
+ 4022f8: 90 nop
+ 4022f9: 5d pop %rbp
+ 4022fa: c3 ret
+ ...
+
+ The aarch64_skip_prologue implementation does use gcc line numbers, which are:
+ ...
+ File name Line number Starting address View Stmt
+ pck.adb 17 0x402580 x
+ pck.adb 17 0x402580 1 x
+ pck.adb 19 0x40258c x
+ pck.adb 20 0x402590 x
+ ...
+ and which are represented like this internally in gdb:
+ ...
+ INDEX LINE ADDRESS IS-STMT PROLOGUE-END
+ 0 17 0x0000000000402580 Y
+ 1 17 0x0000000000402580 Y
+ 2 19 0x000000000040258c Y
+ 3 20 0x0000000000402590 Y
+ 4 END 0x00000000004025a0 Y
+ ...
+
+ The second entry is interpreted as end-of-prologue, so 0x402580 is used, while
+ the actual end of the prologue is at 0x40258c:
+ ...
+ 0000000000402580 <pck__inspect>:
+ 402580: d10043ff sub sp, sp, #0x10
+ 402584: f90007e0 str x0, [sp, #8]
+ 402588: b90007e1 str w1, [sp, #4]
+ 40258c: d503201f nop
+ 402590: d503201f nop
+ 402594: 910043ff add sp, sp, #0x10
+ 402598: d65f03c0 ret
+ 40259c: d503201f nop
+ ...
+
+ Note that the architecture-specific prologue analyzer would have gotten this
+ right:
+ ...
+ (gdb) p /x aarch64_analyze_prologue (gdbarch, pc, pc + 128, 0)
+ $2 = 0x40258c
+ ...
+
+ Fix the FAIL by making the test-case more robust against problems in prologue
+ skipping, by setting the breakpoint on line 19 instead.
+
+ Likewise in a few similar test-cases.
+
+ Tested on x86_64-linux and aarch64-linux.
+
+2022-09-07 Luis Machado <luis.machado@arm.com>
+ Tom de Vries <tdevries@suse.de>
+
+ Fix endianness handling for arm record self tests
+ v2:
+
+ - Add 32-bit Arm instruction selftest
+ - Refactored abstract memory reader into abstract instruction reader
+ - Adjusted code to use templated type and to use host endianness as
+ opposed to target endianness.
+
+ The arm record tests handle 16-bit and 32-bit thumb instructions, but the
+ code is laid out in a way that handles the 32-bit thumb instructions as
+ two 16-bit parts.
+
+ This is fine, but it is prone to host-endianness issues given how the two
+ 16-bit parts are stored and how they are accessed later on. Arm is
+ little-endian by default, so running this test with a GDB built with
+ --enable-targets=all and on a big endian host will run into the following:
+
+ Running selftest arm-record.
+ Process record and replay target doesn't support syscall number -2036195
+ Process record does not support instruction 0x7f70ee1d at address 0x0.
+ Self test failed: self-test failed at ../../binutils-gdb/gdb/arm-tdep.c:14482
+
+ It turns out the abstract memory reader class is more generic than it needs to
+ be, and we can simplify the code a bit by assuming we have a simple instruction
+ reader that only reads up to 4 bytes, which is the length of a 32-bit
+ instruction.
+
+ Instead of returning a bool, we return instead the instruction that has been
+ read. This way we avoid having to deal with the endianness conversion, and use
+ the host endianness instead. The Arm selftests can be executed on non-Arm
+ hosts.
+
+ While at it, Tom suggested adding a 32-bit Arm instruction selftest to increase
+ the coverage of the selftests.
+
+ Bug: https://sourceware.org/bugzilla/show_bug.cgi?id=29432
+
+2022-09-07 Tom de Vries <tdevries@suse.de>
+
+ [gdb/testsuite] Use prototype to call libc functions
+ On openSUSE Tumbleweed (using glibc 2.36), I run into:
+ ...
+ (gdb) print /d (int) munmap (4198400, 4096)^M
+ Invalid cast.^M
+ (gdb) FAIL: gdb.base/break-main-file-remove-fail.exp: cmdline: \
+ get integer valueof "(int) munmap (4198400, 4096)"
+ ...
+
+ The problem is that after starting the executable, the symbol has type
+ "void (*) (void)":
+ ...
+ (gdb) p munmap
+ $1 = {<text variable, no debug info>} 0x401030 <munmap@plt>
+ (gdb) start
+ ...
+ (gdb) p munmap
+ $2 = {void (void)} 0x7ffff7feb9a0 <__GI_munmap>
+ ...
+ which causes the "Invalid cast" error.
+
+ Looking at the debug info for glibc for symbol __GI_munmap:
+ ...
+ <0><189683>: Abbrev Number: 1 (DW_TAG_compile_unit)
+ <189691> DW_AT_name : ../sysdeps/unix/syscall-template.S
+ <189699> DW_AT_producer : GNU AS 2.39.0
+ <1><1896ae>: Abbrev Number: 2 (DW_TAG_subprogram)
+ <1896af> DW_AT_name : __GI___munmap
+ <1896b3> DW_AT_external : 1
+ <1896b4> DW_AT_low_pc : 0x10cad0
+ <1896bc> DW_AT_high_pc : 37
+ ...
+ that's probably caused by this bit (or similar bits for other munmap aliases).
+
+ This is fixed in gas on trunk by commit 5578fbf672e ("GAS: Add a return type
+ tag to DWARF DIEs generated for function symbols").
+
+ Work around this (for say gas 2.39) by explicitly specifying the prototype for
+ munmap.
+
+ Likewise for getpid in a couple of other test-cases.
+
+ Tested on x86_64-linux.
+
+2022-09-07 mengqinggang <mengqinggang@loongson.cn>
+
+ LoongArch: fix gas BFD_RELOC_8/16/24 bug
+ If fixP->fx_subsy is NULL, BFD_RELOC_8/16/24 can't convert to
+ BFD_RELOC_LARCH_xxx.
+
+ gas/config/tc-loongarch.c
+
+2022-09-07 GDB Administrator <gdbadmin@sourceware.org>
+
+ Automatic date update in version.in
+
+2022-09-06 Aaron Merey <amerey@redhat.com>
+ Nick Clifton <nickc@redhat.com>
+
+ Add debuginfod support for objdump -S
+ Currently objdump -S is not able to make use files downloaded from debuginfod.
+ This is due to bfd_find_nearest_line_discriminator being unable to locate any
+ separate debuginfo files in the debuginfod cache. Additionally objdump lacked
+ a call to debuginfod_find_source in order to download missing source files.
+
+ Fix this by using bfd_find_nearest_line_with_alt instead of
+ bfd_find_nearest_line_discriminator. Also add a call to
+ debuginfod_find_source in order to download missing source files.
+
+2022-09-06 Aaron Merey <amerey@redhat.com>
+
+ bfd: Add bfd_find_nearest_line_with_alt
+ bfd_find_nearest_line_with_alt functions like bfd_find_nearest_line with
+ the addition of a parameter for specifying the filename of a supplementary
+ debug file such as one referenced by .gnu_debugaltlink or .debug_sup.
+
+ This patch focuses on implementing bfd_find_nearest_line_with_alt
+ support for ELF/DWARF2 .gnu_debugaltlink. For other targets this
+ function simply sets the invalid_operation bfd_error.
+
+2022-09-06 Tsukasa OI <research_trasio@irq.a4lg.com>
+
+ gdb: add Tsukasa Oi to gdb/MAINTAINERS
+
+2022-09-06 Andrew Burgess <aburgess@redhat.com>
+
+ gdb: move a write after approval entry into the correct place
+ Noticed in passing that an entry in the MAINTAINERS write after
+ approval list was in the wrong place.
+
+2022-09-06 Tsukasa OI <research_trasio@irq.a4lg.com>
+
+ gdb: Add non-enum disassembler options
+ This is paired with "opcodes: Add non-enum disassembler options".
+
+ There is a portable mechanism for disassembler options and used on some
+ architectures:
+
+ - ARC
+ - Arm
+ - MIPS
+ - PowerPC
+ - RISC-V
+ - S/390
+
+ However, it only supports following forms:
+
+ - [NAME]
+ - [NAME]=[ENUM_VALUE]
+
+ Valid values for [ENUM_VALUE] must be predefined in
+ disasm_option_arg_t.values. For instance, for -M cpu=[CPU] in ARC
+ architecture, opcodes/arc-dis.c builds valid CPU model list from
+ include/elf/arc-cpu.def.
+
+ In this commit, it adds following format:
+
+ - [NAME]=[ARBITRARY_VALUE] (cannot contain "," though)
+
+ This is identified by NULL value of disasm_option_arg_t.values
+ (normally, this is a non-NULL pointer to a NULL-terminated list).
+
+ gdb/ChangeLog:
+
+ * gdb/disasm.c (set_disassembler_options): Add support for
+ non-enum disassembler options.
+ (show_disassembler_options_sfunc): Likewise.
+
+2022-09-06 Tom de Vries <tdevries@suse.de>
+
+ [gdb/symtab] Support .debug_names section with TUs in .debug_info
+ When running test-case gdb.cp/cpexprs-debug-types.exp on target board
+ cc-with-debug-names/gdb:debug_flags=-gdwarf-5, we get an executable with
+ a .debug_names section, but no .debug_types section. For dwarf-5, the TUs
+ are no longer put in a separate unit, but instead they're put in the
+ .debug_info section.
+
+ When loading the executable, the .debug_names section is silently ignored
+ because of this check in dwarf2_read_debug_names:
+ ...
+ if (map->tu_count != 0)
+ {
+ /* We can only handle a single .debug_types when we have an
+ index. */
+ if (per_bfd->types.size () != 1)
+ return false;
+ ...
+ which triggers because per_bfd->types.size () == 0.
+
+ The intention of the check is to make sure we don't have more that one
+ .debug_types section, as can happen in a object file (see PR12984):
+ ...
+ $ grep "\.debug_types" 11.s
+ .section .debug_types,"G",@progbits,wt.75c042c23a9a07ee,comdat
+ .section .debug_types,"G",@progbits,wt.c59c413bf50a4607,comdat
+ ...
+
+ Fix this by:
+ - changing the check condition to "per_bfd->types.size () > 1", and
+ - handling per_bfd->types.size () == 0.
+
+ Tested on x86_64-linux.
+
+ Bug: https://sourceware.org/bugzilla/show_bug.cgi?id=29385
+
+2022-09-06 Tom de Vries <tdevries@suse.de>
+
+ [gdb/testsuite] Add gdb.dwarf2/debug-names-bad-cu-index.exp
+ Add test-case gdb.dwarf2/debug-names-bad-cu-index.exp, a regression test for
+ commit 2fe9a3c41fa ("[gdb/symtab] Fix bad compile unit index complaint").
+
+ Tested on x86_64-linux.
+
+2022-09-06 Tom de Vries <tdevries@suse.de>
+
+ [gdb/testsuite] Add gdb.dwarf2/debug-names-tu.exp
+ Add a test-case gdb.dwarf2/debug-names-tu.exp, that uses the dwarf assembler
+ to specify a .debug_names index with the TU list referring to a TU from the
+ .debug_types section.
+
+ This is intended to produce something similar to:
+ ...
+ $ gcc -g -fdebug-types-section ~/hello.c -gdwarf-4
+ $ gdb-add-index -dwarf-5 a.out
+ ...
+
+ Tested on x86_64-linux.
+
+2022-09-06 Tsukasa OI <research_trasio@irq.a4lg.com>
+
+ opcodes: Add non-enum disassembler options
+ This is paired with "gdb: Add non-enum disassembler options".
+
+ There is a portable mechanism for disassembler options and used on some
+ architectures:
+
+ - ARC
+ - Arm
+ - MIPS
+ - PowerPC
+ - RISC-V
+ - S/390
+
+ However, it only supports following forms:
+
+ - [NAME]
+ - [NAME]=[ENUM_VALUE]
+
+ Valid values for [ENUM_VALUE] must be predefined in
+ disasm_option_arg_t.values. For instance, for -M cpu=[CPU] in ARC
+ architecture, opcodes/arc-dis.c builds valid CPU model list from
+ include/elf/arc-cpu.def.
+
+ In this commit, it adds following format:
+
+ - [NAME]=[ARBITRARY_VALUE] (cannot contain "," though)
+
+ This is identified by NULL value of disasm_option_arg_t.values
+ (normally, this is a non-NULL pointer to a NULL-terminated list).
+
+ include/ChangeLog:
+
+ * dis-asm.h (disasm_option_arg_t): Update comment of values
+ to allow non-enum disassembler options.
+
+ opcodes/ChangeLog:
+
+ * riscv-dis.c (print_riscv_disassembler_options): Support
+ non-enum disassembler options on printing disassembler help.
+ * arc-dis.c (print_arc_disassembler_options): Likewise.
+ * mips-dis.c (print_mips_disassembler_options): Likewise.
+
+2022-09-06 GDB Administrator <gdbadmin@sourceware.org>
+
+ Automatic date update in version.in
+
+2022-09-05 Tsukasa OI <research_trasio@irq.a4lg.com>
+
+ sim/riscv: Complete tidying up with SBREAK
+ This commit removes SBREAK-related references on the simulator as it's
+ renamed to EBREAK in 2016 (the RISC-V ISA, version 2.1).
+
+ sim/ChangeLog:
+
+ * riscv/sim-main.c (execute_i): Use "ebreak" instead of "sbreak".
+
+2022-09-05 GDB Administrator <gdbadmin@sourceware.org>
+
+ Automatic date update in version.in
+
+2022-09-04 Andrew Burgess <aburgess@redhat.com>
+
+ sim/erc32: fix gdb with simulator build
+ In commit:
+
+ commit 7b01c1cc1d111ba0afa51e60fa9842d3b971e2d1
+ Date: Mon Apr 4 22:38:04 2022 +0100
+
+ sim: fixes for libopcodes styled disassembler
+
+ changes were made to the simulator source to handle the new libopcodes
+ disassembler styling API.
+
+ Unfortunately, these changes broke building GDB with the erc32 (sparc)
+ simulator, like this:
+
+ ../src/configure --target=sparc-linux
+ make all-gdb
+ ....
+ /usr/bin/ld: ../sim/erc32/libsim.a(interf.o): in function `sim_open':
+ /tmp/build/sim/../../src/sim/erc32/interf.c:247: undefined reference to `fprintf_styled'
+ collect2: error: ld returned 1 exit status
+
+ The problem is that in commit 7b01c1cc1d11 the fprintf_styled function
+ was added into sis.c. This file is only used when building the 'run'
+ binary, that is, the standalone simulator, and is not included in the
+ libsim.a library.
+
+ Now, the obvious fix would be to move fprintf_styled into libsim.a,
+ however, that turns out to be tricky.
+
+ The erc32 simulator currently has two copies of the function run_sim,
+ one in sis.c, and one in interf.c, both of these copies are global.
+
+ Currently, the 'run' binary links fine, though I suspect this might be
+ pure luck. When I tried moving fprintf_styled into interf.c, I ran
+ into multiple-definition (of run_sim) errors. I suspect that by
+ requiring the linker to pull in fprintf_styled from libsim.a I was
+ changing the order in which symbols were loaded, and the linker was
+ now seeing both copies of run_sim, while currently we only see one
+ copy.
+
+ The ideal solution of course, would be to merge the two similar, but
+ slightly different copies of run_sim, and just use the one copy. Then
+ we could safely move fprintf_styled into interf.c too, and all would
+ be good.
+
+ But I don't have time right now to start debugging the erc32
+ simulator, so I wanted a solution that fixes the build without
+ introducing multiple definition errors.
+
+ The easiest solution I think is to just have two copies of
+ fprintf_styled, one in sis.c, and one in interf.c. Unlike run_sim,
+ these two copies are both static, so we will not run into multiple
+ definition issues with this function. The functions themselves are
+ not very big, so it's not a huge amount of duplicate code.
+
+ I am very aware that this is not an ideal solution, and I would
+ welcome anyone who wants to take on fixing the run_sim problem
+ properly, and then cleanup the fprintf_styled duplication.
+
+2022-09-04 GDB Administrator <gdbadmin@sourceware.org>
+
+ Automatic date update in version.in
+
+2022-09-03 GDB Administrator <gdbadmin@sourceware.org>
+
+ Automatic date update in version.in
+
+2022-09-02 Max Filippov <jcmvbkbc@gmail.com>
+
+ xtensa: bfd: fix TLS relocations generated for PIE
+ When generating TLS dynamic relocations the existing xtensa BFD code
+ treats linking to a PIE exactly as linking to a shared object, resulting
+ in generation of wrong relocations for TLS entries. Fix that and add
+ tests.
+
+ bfd/
+ * elf32-xtensa.c (elf_xtensa_check_relocs): Use bfd_link_dll
+ instead of bfd_link_pic. Add elf_xtensa_dynamic_symbol_p test
+ when generating GOT entries.
+ (elf_xtensa_relocate_section): Use bfd_link_dll instead of
+ bfd_link_pic.
+ ld/
+ * testsuite/ld-xtensa/tlspie.dd: New file.
+ * testsuite/ld-xtensa/tlspie.rd: New file.
+ * testsuite/ld-xtensa/tlspie.sd: New file.
+ * testsuite/ld-xtensa/tlspie.td: New file.
+ * testsuite/ld-xtensa/xtensa-linux.exp (TLS PIE transitions):
+ New test.
+
+2022-09-02 Max Filippov <jcmvbkbc@gmail.com>
+
+ xtensa: adjust expected output in ld TLS tests
+ objdump output for l32r opcode was changed in commit b3ea76397a07
+ ("opcodes: xtensa: display loaded literal value"), but xtensa linker TLS
+ relaxation tests weren't adjusted accordingly.
+ readelf output was changed in commit 23356397449a ("Adjust readelf's
+ output so that section symbols without a name as shown with their
+ section name."), but xtensa linker TLS relaxation tests weren't adjusted
+ accordingly.
+ Fix expected output changes in xtensa ld TLS relaxation tests.
+
+ ld/
+ * testsuite/ld-xtensa/tlsbin.dd: Adjust expected output for l32r
+ opcodes.
+ * testsuite/ld-xtensa/tlsbin.rd: Adjust expected output to allow
+ for named section symbols.
+ * testsuite/ld-xtensa/tlspic.dd: Adjust expected output for l32r
+ opcodes.
+ * testsuite/ld-xtensa/tlspic.rd: Adjust expected output to allow
+ for named section symbols.
+
+2022-09-02 Frederic Cambus <fred@statdns.com>
+
+ Add OpenBSD ARM Little Endian BFD support.
+ * config.bfd (arm-*-openbsd*): Restore target.
+
+2022-09-02 Tsukasa OI <research_trasio@irq.a4lg.com>
+
+ RISC-V: Print highest address (-1) on the disassembler
+ This patch makes possible to print the highest address (-1) and the addresses
+ related to gp which value is -1. This is particularly useful if the highest
+ address space is used for I/O registers and corresponding symbols are defined.
+ Besides, despite that it is very rare to have GP the highest address, it would
+ be nice because we enabled highest address printing on regular cases.
+
+ gas/ChangeLog:
+
+ * testsuite/gas/riscv/dis-addr-topaddr.s: New test for the top
+ address (-1) printing.
+ * testsuite/gas/riscv/dis-addr-topaddr-32.d: Likewise.
+ * testsuite/gas/riscv/dis-addr-topaddr-64.d: Likewise.
+ * testsuite/gas/riscv/dis-addr-topaddr-gp.s: New test for
+ GP-relative addressing when GP is the highest address (-1).
+ * testsuite/gas/riscv/dis-addr-topaddr-gp-32.d: Likewise.
+ * testsuite/gas/riscv/dis-addr-topaddr-gp-64.d: Likewise.
+
+ opcodes/ChangeLog:
+
+ * riscv-dis.c (struct riscv_private_data): Add `to_print_addr' to
+ enable printing the highest address.
+ (maybe_print_address): Utilize `to_print_addr'.
+ (riscv_disassemble_insn): Likewise.
+
+2022-09-02 Tsukasa OI <research_trasio@irq.a4lg.com>
+
+ RISC-V: PR29342, Fix RV32 disassembler address computation
+ If either the base register is `zero', `tp' or `gp' and XLEN is 32, an
+ incorrectly sign-extended address is produced when printing. This commit
+ fixes this by fitting an address into a 32-bit value on RV32.
+
+ Besides, H. Peter Anvin discovered that we have wrong address computation
+ for JALR instruction (the initial bug is back in 2018). This commit also
+ fixes that based on the idea of Palmer Dabbelt.
+
+ gas/
+ pr29342
+ * testsuite/gas/riscv/lla32.d: Reflect RV32 address computation fix.
+ * testsuite/gas/riscv/dis-addr-overflow.s: New testcase.
+ * testsuite/gas/riscv/dis-addr-overflow-32.d: Likewise.
+ * testsuite/gas/riscv/dis-addr-overflow-64.d: Likewise.
+ opcodes/
+ pr29342
+ * riscv-dis.c (maybe_print_address): Fit address into 32-bit on RV32.
+ (print_insn_args): Fix JALR address by adding EXTRACT_ITYPE_IMM.
+
+2022-09-02 Tsukasa OI <research_trasio@irq.a4lg.com>
+
+ RISC-V: Add address printer tests with ADDIW
+ Address sequences involving ADDIW/C.ADDIW instructions require special
+ handling to sign-extend lower 32-bits of the original result.
+
+ This commit tests whether this sign-extension works.
+
+ gas/ChangeLog:
+
+ * testsuite/gas/riscv/dis-addr-addiw.s: New to test the address
+ computation with sign extension as used in ADDIW/C.ADDIW.
+ * testsuite/gas/riscv/dis-addr-addiw-a.d: Test PC sign bit 0.
+ * testsuite/gas/riscv/dis-addr-addiw-b.d: Test PC sign bit 1.
+
+ gas/ChangeLog:
+
+ * testsuite/gas/riscv/dis-addr-addiw-a.d: New test.
+ * testsuite/gas/riscv/dis-addr-addiw-b.d: New test.
+ * testsuite/gas/riscv/dis-addr-addiw.s: New test.
+
+2022-09-02 GDB Administrator <gdbadmin@sourceware.org>
+
+ Automatic date update in version.in
+
+2022-09-01 Tsukasa OI <research_trasio@irq.a4lg.com>
+
+ sim: Update mailing list address
+ The commit bf1102165389 "* MAINTAINERS: Perform some obvious fixups."
+ back in 2009 changed the mailing list address gdb-patches@sources.redhat.com
+ to gdb-patches@sourceware.org.
+
+ This commit does the same to sim/MAINTAINERS.
+
+ sim/ChangeLog:
+
+ * MAINTAINERS: Update mailing list address.
+
+ Change-Id: I56c6bf21a4bddfb35ffc3336ffcba7ff9b39926e
+
+2022-09-01 Nick Clifton <nickc@redhat.com>
+
+ dllwrap, windres and dlltools use mktemp, which should be avoided
+ PR 29534
+ * dllwrap.c: Replace uses of choose_temp_base() with
+ make_temp_file().
+ * dlltool.c: Likewise.
+ * resrc.c: Likewise.
+
+2022-09-01 Maciej W. Rozycki <macro@embecosm.com>
+
+ GDB/doc: Document the Guile `#:unlimited' keyword
+ Document the Guile `#:unlimited' keyword and deprecate the internal
+ integer representation it corresponds to for integer parameters.
+
+2022-09-01 Lancelot SIX <lancelot.six@amd.com>
+
+ gdb/python-config: replace deprecated distutils.sysconfig
+ When running the gdb/configure script on ubuntu 22.04 with
+ python-3.10.4, I see:
+
+ checking for python... no
+ checking for python3... /usr/bin/python3
+ [...]/gdb/python/python-config.py:7: DeprecationWarning: The distutils package is deprecated and slated for removal in Python 3.12. Use setuptools or check PEP 632 for potential alternatives
+ from distutils import sysconfig
+ [...]/gdb/python/python-config.py:7: DeprecationWarning: The distutils.sysconfig module is deprecated, use sysconfig instead
+ from distutils import sysconfig
+ [...]/gdb/python/python-config.py:7: DeprecationWarning: The distutils package is deprecated and slated for removal in Python 3.12. Use setuptools or check PEP 632 for potential alternatives
+ from distutils import sysconfig
+ [...]/gdb/python/python-config.py:7: DeprecationWarning: The distutils.sysconfig module is deprecated, use sysconfig instead
+ from distutils import sysconfig
+ [...]/gdb/python/python-config.py:7: DeprecationWarning: The distutils package is deprecated and slated for removal in Python 3.12. Use setuptools or check PEP 632 for potential alternatives
+ from distutils import sysconfig
+ [...]/gdb/python/python-config.py:7: DeprecationWarning: The distutils.sysconfig module is deprecated, use sysconfig instead
+ from distutils import sysconfig
+ checking for python... yes
+
+ The distutils module is deprecated as per the PEP 632[1] and will be
+ removed in python-3.12.
+
+ This patch migrates gdb/python/python-config.py from distutils.sysconfig
+ to the sysconfig module[2].
+
+ The sysconfig module has has been introduced in the standard library in
+ python 3.2. Given that support for python < 3.2 has been removed by
+ edae3fd6600f: "gdb/python: remove Python 2 support", this patch does not
+ need to support both implementations for backward compatibility.
+
+ Tested on ubuntu-22.04 and ubuntu 20.04.
+
+ [1] https://peps.python.org/pep-0632/
+ [2] https://docs.python.org/3/library/sysconfig.html
+
+ Change-Id: Id0df2baf3ee6ce68bd01c236b829ab4c0a4526f6
+
+2022-09-01 GDB Administrator <gdbadmin@sourceware.org>
+
+ Automatic date update in version.in
+
+2022-08-31 Tom Tromey <tromey@adacore.com>
+
+ Fix interpreter-exec crash
+ PR mi/10347 points out that using interpreter-exec inside of a
+ "define" command will crash gdb. The bug here is that
+ gdb_setup_readline doesn't check for the case where instream==nullptr.
+
+ Bug: https://sourceware.org/bugzilla/show_bug.cgi?id=10347
+
+2022-08-31 Tom Tromey <tromey@adacore.com>
+
+ Fix "source" with interpreter-exec
+ PR mi/15811 points out that "source"ing a file that uses
+ interpreter-exec will put gdb in a weird state, where the CLI stops
+ working. The bug is that tui_interp::suspend does not unregister the
+ event file descriptor.
+
+ The test case is from Andrew Burgess.
+
+ Bug: https://sourceware.org/bugzilla/show_bug.cgi?id=15811
+
+2022-08-31 Tom Tromey <tromey@adacore.com>
+
+ Remove a call to clear_interpreter_hooks
+ mi_interp::resume does not need to call clear_interpreter_hooks,
+ because this is already done by interp_set.
+
+ TUI stdout buffering cleanup
+ The TUI checks against gdb_stdout to decide when to buffer. It seems
+ much cleaner to me to simply record this as an attribute of the stream
+ itself.
+
+ Remove a ui-related memory leak
+ gdb_setup_readline makes new streams and assigns to the various stream
+ members of struct ui. However, these assignments cause the previous
+ values to leak. As far as I can, this code is simply unnecessary and
+ can be removed -- with the exception of the assignment to gdb_stdtarg,
+ which is not initialized anywhere else.
+
+ Remove tui_out_new
+ tui_out_new is just a simple wrapper for 'new' and can be removed,
+ simplifying gdb a tiny bit.
+
+ Use scoped_restore in safe_parse_type
+ This changes safe_parse_type to use scoped_restore rather than
+ explicit assignments.
+
+ Use member initialization in 'struct ui'
+ This changes 'struct ui' to use member initialization. This is
+ simpler to understand.
+
+ Remove two unused members from mi_interp
+ These members of mi_interp aren't used and can be removed.
+
+ Remove obsolete filtering comment
+ top.h has an obsolete comment about the use of _unfiltered.
+
+ Remove the "for moment" comments
+ A few spots setting some gdb output stream variables have a "for
+ moment" comment. These comments aren't useful and I think the moment
+ has passed -- these are permanent now.
+
+ Use ui_out_redirect_pop in more places
+ This changes ui_out_redirect_pop to also perform the redirection, and
+ then updates several sites to use this, rather than explicit
+ redirects.
+
+ Free ui::line_buffer
+ A ui initializes its line_buffer, but never calls buffer_free on it.
+ This patch fixes the oversight. I found this by inspection.
+
+ Remove some dead code
+ This patch removes some dead code and an old FIXME. These no longer
+ seem useful, even for documentation purposes.
+
+ Let ui::input_fd be -1
+ This changes gdb so that, if ui::input_fd is set to -1, then it will
+ not be registered with the event loop. This is useful for the DAP
+ support code I wrote, but as it turns out to also be useful to
+ Insight, it seems best to check it in separately.
+
+2022-08-31 Andrew Burgess <aburgess@redhat.com>
+
+ gdb/riscv: better support for fflags and frm registers
+ First, some background on the RISC-V registers fflags, frm, and fcsr.
+
+ These three registers all relate to the floating-point status and
+ control mechanism on RISC-V. The fcsr is the floatint-point control
+ status register, and consists of two parts, the flags (bits 0 to 4)
+ and the rounding-mode (bits 5 to 7).
+
+ The fcsr register is just one of many control/status registers (or
+ CSRs) available on RISC-V. The fflags and frm registers are also
+ CSRs. These CSRs are aliases for the relevant parts of the fcsr
+ register. So fflags is an alias for bits 0 to 4 of fcsr, and frm is
+ an alias for bits 5 to 7 of fcsr.
+
+ This means that a user can change the floating-point rounding mode
+ either, by writing a complete new value into fcsr, or by writing just
+ the rounding mode into frm.
+
+ How this impacts on GDB is like this: a target description could,
+ legitimately include all three registers, fcsr, fflags, and frm. The
+ QEMU target currently does this, and this makes sense. The target is
+ emulating the complete system, and has all three CSRs available, so
+ why not tell GDB about this.
+
+ In contrast, the RISC-V native Linux target only has access to the
+ fcsr. This is because the ptrace data structure that the kernel uses
+ for reading and writing floating point state only contains a copy of
+ the fcsr, after all, this one field really contains both the fflags
+ and frm fields, so why carry around duplicate data.
+
+ So, we might expect that the target description for the RISC-V native
+ Linux GDB would only contain the fcsr register. Unfortunately, this
+ is not the case. The RISC-V native Linux target uses GDB's builtin
+ target descriptions by calling riscv_lookup_target_description, this
+ will then add an fpu feature from gdb/features/riscv, either
+ 32bit-fpu.xml or 64bit-fpu.xml. The problem, is that these features
+ include an entry for fcsr, fflags, and frm. This means that GDB
+ expects the target to handle reading and writing these registers. And
+ the RISC-V native Linux target currently doesn't.
+
+ In riscv_linux_nat_target::store_registers and
+ riscv_linux_nat_target::fetch_registers only the fcsr register is
+ handled, this means that, for RISC-V native Linux, the fflags and frm
+ registers always show up as <unavailable> - they are present in the
+ target description, but the target doesn't know how to access the
+ registers.
+
+ A final complication relating to these floating pointer CSRs is which
+ target description feature the registers appear in.
+
+ These registers are CSRs, so it would seem sensible that these
+ registers should appear in the CSR target description feature.
+
+ However, when I first added RISC-V target description support, I was
+ using a RISC-V simulator that didn't support any CSRs other than the
+ floating point related ones. This simulator bundled all the float
+ related CSRs into the fpu target feature. This didn't feel completely
+ unreasonable to me, and so I had GDB check for these registers in
+ either target feature.
+
+ In this commit I make some changes relating to how GDB handles the
+ three floating point CSR:
+
+ 1. Remove fflags and frm from 32bit-fpu.xml and 64bit-fpu.xml. This
+ means that the default RISC-V target description (which RISC-V native
+ FreeBSD), and the target descriptions created for RISC-V native Linux,
+ will not include these registers. There's nothing stopping some other
+ target (e.g. QEMU) from continuing to include all three of these CSRs,
+ the code in riscv-tdep.c continues to check for all three of these
+ registers, and will handle them correctly if they are present.
+
+ 2. If a target supplied fcsr, but does not supply fflags and/or frm,
+ then RISC-V GDB will now create two pseudo registers in order to
+ emulate the two missing CSRs. These new pseudo-registers do the
+ obvious thing of just reading and writing the fcsr register.
+
+ 3. With the new pseudo-registers we can no longer make use of the GDB
+ register numbers RISCV_CSR_FFLAGS_REGNUM and RISCV_CSR_FRM_REGNUM.
+ These will be the numbers used if the target supplies the registers in
+ its target description, but, if GDB falls back to using
+ pseudo-registers, then new, unique numbers will be used. To handle
+ this I've added riscv_gdbarch_tdep::fflags_regnum and
+ riscv_gdbarch_tdep::frm_regnum, I've then updated the RISC-V code to
+ compare against these fields.
+
+ When adding the pseudo-register support, it is important that the
+ pseudo-register numbers are calculated after the call to
+ tdesc_use_registers. This is because we don't know the total number
+ of physical registers until after this call, and the psuedo-register
+ numbers must follow on from the real (target supplied) registers.
+
+ I've updated some tests to include more testing of the fflags and frm
+ registers, as well as adding a new test.
+
+2022-08-31 Andrew Burgess <aburgess@redhat.com>
+
+ gdb: Add tdesc_found_register function to tdesc API
+ This commit adds a new function to the target description API within
+ GDB. This new function is not used in this commit, but will be used
+ in the next commit, I'm splitting it out into a separate patch for
+ easier review.
+
+ What I want to do in the next commit is check to see if a target
+ description supplied a particular register, however, the register in
+ question could appear in one of two possible features.
+
+ The new function allows me to ask the tdesc_arch_data whether a
+ register was found and assigned a particular GDB register number once
+ all of the features have been checked. I think this is a much simpler
+ solution than adding code such that, while checking each feature, I
+ spot if the register I'm processing is the one I care about.
+
+ No tests here as the new code is not used, but this code will be
+ exercised in the next commit.
+
+2022-08-31 Andrew Burgess <aburgess@redhat.com>
+
+ gdb/riscv: improve (and fix) display of frm field in 'info registers'
+ On RISC-V the FCSR (float control/status register) is split into two
+ parts, FFLAGS (the flags) and FRM (the rounding mode). Both of these
+ two fields are part of the FCSR register, but can also be accessed as
+ separate registers in their own right. And so, we have three separate
+ registers, $fflags, $frm, and $fcsr, with the last of these being the
+ combination of the first two.
+
+ Here's how the bits of FCSR are split between FRM and FFLAGS:
+
+ ,--------- FFLAGS
+ |---|
+ 76543210 <----- FCSR
+ |-|
+ '--------------FRM
+
+ Here's how GDB currently displays these registers:
+
+ (gdb) info registers $fflags $frm $fcsr
+ fflags 0x0 RD:0 NV:0 DZ:0 OF:0 UF:0 NX:0
+ frm 0x0 FRM:0 [RNE (round to nearest; ties to even)]
+ fcsr 0x0 RD:0 NV:0 DZ:0 OF:0 UF:0 NX:0 FRM:0 [RNE (round to nearest; ties to even)]
+
+ Notice the 'RD' field which is present in both $fflags and $fcsr.
+ This field contains the value of the FRM field, which makes sense when
+ displaying the $fcsr, but makes no sense when displaying $fflags, as
+ the $fflags doesn't include the FRM field.
+
+ Additionally, the $fcsr already includes an FRM field, so the
+ information in 'RD' is duplicated. Consider this:
+
+ (gdb) set $frm = 0x3
+ (gdb) info registers $fflags $frm $fcsr │
+ fflags 0x0 RD:0 NV:0 DZ:0 OF:0 UF:0 NX:0
+ frm 0x3 FRM:3 [RUP (Round up towards +INF)]
+ fcsr 0x60 RD:3 NV:0 DZ:0 OF:0 UF:0 NX:0 FRM:3 [RUP (Round up towards +INF)]
+
+ See how the 'RD' field in $fflags still displays 0, while the 'RD' and
+ 'FRM' fields in $fcsr show the same information.
+
+ The first change I propose in this commit is to remove the 'RD'
+ field. After this change the output now looks like this:
+
+ (gdb) info registers $fflags $frm $fcsr
+ fflags 0x0 NV:0 DZ:0 OF:0 UF:0 NX:0
+ frm 0x0 FRM:0 [RNE (round to nearest; ties to even)]
+ fcsr 0x0 NV:0 DZ:0 OF:0 UF:0 NX:0 FRM:0 [RNE (round to nearest; ties to even)]
+
+ Next, I spotted that the text that goes along with the 'FRM' field was
+ not wrapped in the i18n markers for internationalisation, so I added
+ those.
+
+ Next, I spotted that:
+
+ (gdb) set $frm=0x7
+ (gdb) info registers $fflags $frm $fcsr
+ fflags 0x0 RD:0 NV:0 DZ:0 OF:0 UF:0 NX:0
+ frm 0x7 FRM:3 [RUP (Round up towards +INF)]
+ fcsr 0xe0 RD:7 NV:0 DZ:0 OF:0 UF:0 NX:0 FRM:3 [RUP (Round up towards +INF)]
+
+ Notice that despite being a 3-bit field, FRM masks to 2-bits.
+ Checking the manual I can see that the FRM field is 3-bits, and is
+ defined for all 8 values. That GDB masks to 2-bits is just a bug I
+ think, so I've fixed this.
+
+ Finally, the 'FRM' text for value 0x7 is wrong. Currently we use the
+ text 'dynamic rounding mode' for value 0x7. However, this is not
+ really correct.
+
+ A RISC-V instruction can either encode the rounding mode within the
+ instruction, or a RISC-V instruction can choose to use a global,
+ dynamic rounding mode.
+
+ So, for the rounding-mode field of an _instruction_ the value 0x7
+ indicates "dynamic round mode", the instruction should defer to the
+ rounding mode held in the FRM field of the $fcsr.
+
+ But it makes no sense for the FRM of $fcsr to itself be set to
+ 0x7 (dynamic rounding mode), and indeed, section 11.2, "Floating-Point
+ Control and Status Register" of the RISC-V manual, says that a value
+ of 0x7 in the $fcsr FRM field is invalid, and if an instruction has
+ _its_ round-mode set to dynamic, and the FRM field is also set to 0x7,
+ then an illegal instruction exception is raised.
+
+ And so, I propose changing the text for value 0x7 of the FRM field to
+ be "INVALID[7] (Dynamic rounding mode)". We already use the text
+ "INVALID[5]" and "INVALID[6]" for the two other invalid fields,
+ however, I think adding the extra "Dynamic round mode" hint might be
+ helpful.
+
+ I've added a new test that uses 'info registers' to check what GDB
+ prints for the three registers related to this patch. There is one
+ slight oddity with this test - for the fflags and frm registers, the
+ test accepts both the "normal" output (as described above), but also
+ allows these registers to be reported as '<unavailable>'.
+
+ The reason why I accept <unavailable> is that currently, the RISC-V,
+ native Linux target advertises these registers in its target
+ description, but then doesn't support reading or writing of these
+ registers, this results in the registers being reported as
+ unavailable.
+
+ A later patch in this series will address this issue, and will remove
+ this check for <unavailable>.
+
+2022-08-31 Frederic Cambus <fred@statdns.com>
+
+ Add OpenBSD AArch64 GAS support.
+ * configure.tgt (aarch64*-*-openbsd*): Add target.
+
+2022-08-31 Nils-Christian Kempke <nils-christian.kempke@intel.com>
+
+ gdb, dwarf: create symbols for template tags without names
+ The following GDB behavior was also reported as a GDB bug in
+
+ https://sourceware.org/bugzilla/show_bug.cgi?id=28396
+
+ I will reiterate the problem a bit and give some more information here.
+ This patch closes the above mentioned bug.
+
+ The DWARF 5 standard 2.23 'Template Parameters' reads:
+
+ A template type parameter is represented by a debugging information
+ entry with the tag DW_TAG_template_type_parameter. A template value
+ parameter is represented by a debugging information entry with the tag
+ DW_TAG_template_value_parameter. The actual template parameter entries
+ appear in the same order as the corresponding template formal
+ parameter declarations in the source progam.
+
+ A type or value parameter entry may have a DW_AT_name attribute, whose
+ value is a null-terminated string containing the name of the
+ corresponding formal parameter.
+
+ So the DW_AT_name attribute for DW_TAG_template_type_parameter and
+ DW_TAG_template_value_parameter is optional.
+
+ Within GDB, creating a new symbol from some read DIE usually requires the
+ presence of a DW_AT_name for the DIE (an exception here is the case of
+ unnamed namespaces or the existence of a linkage name).
+
+ This patch makes the presence of the DW_AT_name for template value/type
+ tags optional, similar to the unnamed namespaces.
+
+ For unnamed namespaces dwarf2_name simply returns the constant string
+ CP_ANONYMOUS_NAMESPACE_STR '(anonymous namespace)'. For template tags a
+ case was added to the switch statement calling the
+ unnamed_template_tag_name helper. Within the scope of parent which
+ the template parameter is a child of, the helper counts the position
+ of the template tag within the unnamed template tags and returns
+ '<unnamedNUMBER>' where NUMBER is its position. This way we end up with
+ unique names within the respective scope of the function/class/struct
+ (these are the only currenltly supported template kinds within GDB and
+ usually the compilers) where we discovered the template tags in.
+
+ While I do not know of a way to bring GCC to emit template tags without
+ names there is one for clang/icpx. Consider the following example
+
+ template<typename A, typename B, typename C>
+ class Foo {};
+
+ template<typename, typename B, typename>
+ class Foo;
+
+ int main () {
+ Foo<double, int, float> f;
+ return 0;
+ }
+
+ The forward declaration for 'Foo' with the missing template type names
+ 'A' and 'C' makes clang emit a bunch of template tags without names:
+
+ ...
+ <2><43>: Abbrev Number: 3 (DW_TAG_variable)
+ <44> DW_AT_location : 2 byte block: 91 78 (DW_OP_fbreg: -8)
+ <47> DW_AT_name : (indirect string, offset: 0x63): f
+ <4b> DW_AT_decl_file : 1
+ <4c> DW_AT_decl_line : 8
+ <4d> DW_AT_type : <0x59>
+ ...
+ <1><59>: Abbrev Number: 5 (DW_TAG_class_type)
+ <5a> DW_AT_calling_convention: 5 (pass by value)
+ <5b> DW_AT_name : (indirect string, offset: 0x74): Foo<double, int, float>
+ <5f> DW_AT_byte_size : 1
+ <60> DW_AT_decl_file : 1
+ <61> DW_AT_decl_line : 2
+ <2><62>: Abbrev Number: 6 (DW_TAG_template_type_param)
+ <63> DW_AT_type : <0x76>
+ <2><67>: Abbrev Number: 7 (DW_TAG_template_type_param)
+ <68> DW_AT_type : <0x52>
+ <6c> DW_AT_name : (indirect string, offset: 0x6c): B
+ <2><70>: Abbrev Number: 6 (DW_TAG_template_type_param)
+ <71> DW_AT_type : <0x7d>
+ ...
+
+ Befor this patch, GDB would not create any symbols for the read template
+ tag DIEs and thus lose knowledge about them. Breaking at the return
+ statement and printing f's type would read
+
+ (gdb) ptype f
+ type = class Foo<double, int, float> [with B = int] {
+ <no data fields>
+ }
+
+ After this patch GDB does generate symbols from the DWARF (with their
+ artificial names:
+
+ (gdb) ptype f
+ type = class Foo<double, int, float> [with <unnamed0> = double, B = int,
+ <unnamed1> = float] {
+ <no data fields>
+ }
+
+ The same principle theoretically applies to template functions. Also
+ here, GDB would not record unnamed template TAGs but I know of no visual
+ way to trigger and test this changed behavior. Template functions do
+ not emit a '[with...]' list and their name generation also does not
+ suffer from template tags without names. GDB does not check whether or
+ not a template tag has a name in 'dwarf2_compute_name' and thus, the
+ names of the template functions are created independently of whether or
+ not the template TAGs have a DW_TAT_name attribute. A testcase has
+ been added in the gdb.dwarf2 for template classes and structs.
+
+ Bug: https://sourceware.org/bugzilla/show_bug.cgi?id=28396
+
+2022-08-31 Nils-Christian Kempke <nils-christian.kempke@intel.com>
+
+ gdb, testsuite: adapt function_range expected name
+ When writing a dwarf testcase for some C++ code I wanted to use the
+ MACRO_AT_range which in turn uses the function_range proc in dwarf.exp
+ to extract the bounds of 'main'.
+
+ However, the macro failed as GDB prints the C++ 'main' with its
+ arguments as 'main(int, char**)' or 'main()'.
+
+ The reason for this is that in read.c::dwarf2_compute_name we call
+ c_type_print_args on C++ functions and append their arguments to the
+ function name. This happens to all C++ functions, but is only visible
+ when the function doesn't have a linkage name.
+
+ An example might make this more clear. Given the following code
+
+ >> cat c.cpp
+ int foo (int a, float b)
+ {
+ return 0;
+ }
+
+ int main (int argc, char **argv)
+ {
+ return 0;
+ }
+
+ which is legal in both languages, C and C++, and compiling it with
+ e.g. clang or gcc will make the disassemble command look like:
+
+ >> clang --version
+ clang version 10.0.0-4ubuntu1
+ ...
+ >> clang -O0 -g ./c.cpp
+ >> gdb -q ./a.out -ex "start"
+ ...
+ (gdb) disassemble main
+ Dump of assembler code for function main(int, char**):
+ 0x0000000000401120 <+0>: push %rbp
+ 0x0000000000401121 <+1>: mov %rsp,%rbp
+ ...
+ 0x0000000000401135 <+21>: ret
+ End of assembler dump.
+ (gdb) disassemble foo
+ Dump of assembler code for function _Z3fooif:
+ 0x0000000000401110 <+0>: push %rbp
+ 0x0000000000401111 <+1>: mov %rsp,%rbp
+ ...
+ 0x000000000040111f <+15>: ret
+ End of assembler dump.
+
+ Note, that main is emitted with its arguments while for foo the linkage
+ name is being printed, as also visible in its DWARF:
+
+ >> objdump ./a.out --dwarf=info | grep "foo" -A3 -B3
+ <2b> DW_AT_low_pc : 0x401110
+ <33> DW_AT_high_pc : 0x10
+ <37> DW_AT_frame_base : 1 byte block: 56 (DW_OP_reg6 (rbp))
+ <39> DW_AT_linkage_name: (indirect string, offset: 0x39): _Z3fooif
+ <3d> DW_AT_name : (indirect string, offset: 0x42): foo
+ <41> DW_AT_decl_file : 1
+ <42> DW_AT_decl_line : 1
+ <43> DW_AT_type : <0x9a>
+
+ Now, let's rename the C++ file and compile it as C:
+
+ >> mv c.cpp c.c
+ >> clang -O0 -g ./c.c
+ >> gdb -q ./a.out -ex "start'
+ ...
+ (gdb) disassemble main
+ Dump of assembler code for function main:
+ 0x0000000000401120 <+0>: push %rbp
+ 0x0000000000401121 <+1>: mov %rsp,%rbp
+ ...
+ 0x0000000000401135 <+21>: ret
+ End of assembler dump.
+ (gdb) disassemble foo
+ Dump of assembler code for function foo:
+ 0x0000000000401110 <+0>: push %rbp
+ 0x0000000000401111 <+1>: mov %rsp,%rbp
+ ...
+ 0x000000000040111f <+15>: ret
+ End of assembler dump.
+
+ Note, for foo we did not get a linkage name emitted in DWARF, so
+ it is printed by its name:
+
+ >> objdump --dwarf=info ./a.out | grep foo -A3 -B3
+ <2b> DW_AT_low_pc : 0x401110
+ <33> DW_AT_high_pc : 0x10
+ <37> DW_AT_frame_base : 1 byte block: 56 (DW_OP_reg6 (rbp))
+ <39> DW_AT_name : (indirect string, offset: 0x37): foo
+ <3d> DW_AT_decl_file : 1
+ <3e> DW_AT_decl_line : 1
+ <3f> DW_AT_prototyped : 1
+
+ To make the macro and proc work with C++ as well, an optional argument
+ list was added to the regex matching the function name in the
+ disassemble command in function_range. This does not change any used
+ behavior as currently, there exists no C++ test using the proc
+ function_range.
+
+2022-08-31 Aaron Merey <amerey@redhat.com>
+
+ gdb/elfread.c: Use bfd filename instead of objfile->original_name
+ The call to debuginfod_debuginfo_query in elf_symfile_read is given
+ objfile->original_name as the filename to print when downloading the
+ objfile's debuginfo.
+
+ In some cases original_name is prefixed with gdb's working directory
+ even though the objfile is not located in the working directory. This
+ causes debuginfod to display the wrong path of the objfile during a download.
+
+ Fix this by using the objfile's bfd filename instead.
+
+2022-08-31 GDB Administrator <gdbadmin@sourceware.org>
+
+ Automatic date update in version.in
+
+2022-08-30 Martin Storsjö <martin@martin.st>
+
+ ld: pe: Fix linking against Microsoft import libraries with multiple DLLs
+ Initially, since c6c37250e98f113755e0d787f7070e2ac80ce77e (in 1999),
+ in order to fix linking against Microsoft import libraries, ld did
+ internally rename members of such libraries. At that point, the
+ criteria for being considered a Microsoft import library was that
+ every archive member had the same name (no regard for exactly what
+ that name was).
+
+ This was later amended in 44dbf3639f127af46d569ad96b6242dfbc4c0a89
+ (in 2003) to allow for Microsoft import libraries with intermixed
+ static object files. At this point, the criteria were extended, so
+ that all members following the first member named *.dll either had
+ the exact same member name, or be named *.obj. (Curiously, this would
+ allow members with any name if it precedes the first one named *.dll.)
+
+ In practice, Microsoft style import libraries can contain
+ members for linking against more than one DLL (built by merging
+ multiple regular import libraries into one).
+
+ Instead of trying to do validation of the whole archive before
+ considering it a Microsoft style import library, relax the criteria
+ for doing the member renaming: If an archive member is named *.dll
+ and it contains .idata sections, assume that that member is a
+ Microsoft import file, and apply the renaming scheme.
+
+ This works for imports for any number of DLLs in the same library,
+ intermixed with other static object files (regardless of their
+ names), and vastly simplifies the code.
+
+ LLVM generates Microsoft style import libraries, and Rust builds
+ seem to bundle up multiple import libraries together with some
+ Rust specific static objects. This fixes linking directly against
+ them with ld.bfd.
+
+2022-08-30 Simon Marchi <simon.marchi@polymtl.ca>
+
+ gdbsupport: add wrapper around result_of and invoke_result
+ When building with Clang 14 (using gcc 12 libstdc++ headers), I get:
+
+ CXX dwarf2/read.o
+ In file included from /home/simark/src/binutils-gdb/gdb/dwarf2/read.c:94:
+ /home/simark/src/binutils-gdb/gdb/../gdbsupport/parallel-for.h:142:21: error: 'result_of<(lambda at /home/simark/src/binutils-gdb/gdb/dwarf2/read.c:7124:5) (__gnu_debug::_Safe_iterator<__gnu_cxx::__normal_iterator<std::unique_ptr<dwarf2_per_cu_data, dwarf2_per_cu_data_deleter> *, std::__cxx1998::vector<std::unique_ptr<dwarf2_per_cu_data, dwarf2_per_cu_data_deleter>>>, std::vector<std::unique_ptr<dwarf2_per_cu_data, dwarf2_per_cu_data_deleter>>, std::random_access_iterator_tag>, __gnu_debug::_Safe_iterator<__gnu_cxx::__normal_iterator<std::unique_ptr<dwarf2_per_cu_data, dwarf2_per_cu_data_deleter> *, std::__cxx1998::vector<std::unique_ptr<dwarf2_per_cu_data, dwarf2_per_cu_data_deleter>>>, std::vector<std::unique_ptr<dwarf2_per_cu_data, dwarf2_per_cu_data_deleter>>, std::random_access_iterator_tag>)>' is deprecated: use 'std::invoke_result' instead [-Werror,-Wdeprecated-declarations]
+ = typename std::result_of<RangeFunction (RandomIt, RandomIt)>::type;
+ ^
+ /home/simark/src/binutils-gdb/gdb/dwarf2/read.c:7122:14: note: in instantiation of function template specialization 'gdb::parallel_for_each<__gnu_debug::_Safe_iterator<__gnu_cxx::__normal_iterator<std::unique_ptr<dwarf2_per_cu_data, dwarf2_per_cu_data_deleter> *, std::__cxx1998::vector<std::unique_ptr<dwarf2_per_cu_data, dwarf2_per_cu_data_deleter>>>, std::vector<std::unique_ptr<dwarf2_per_cu_data, dwarf2_per_cu_data_deleter>>, std::random_access_iterator_tag>, (lambda at /home/simark/src/binutils-gdb/gdb/dwarf2/read.c:7124:5)>' requested here
+ = gdb::parallel_for_each (1, per_bfd->all_comp_units.begin (),
+ ^
+ /usr/bin/../lib64/gcc/x86_64-pc-linux-gnu/12.1.1/../../../../include/c++/12.1.1/type_traits:2597:9: note: 'result_of<(lambda at /home/simark/src/binutils-gdb/gdb/dwarf2/read.c:7124:5) (__gnu_debug::_Safe_iterator<__gnu_cxx::__normal_iterator<std::unique_ptr<dwarf2_per_cu_data, dwarf2_per_cu_data_deleter> *, std::__cxx1998::vector<std::unique_ptr<dwarf2_per_cu_data, dwarf2_per_cu_data_deleter>>>, std::vector<std::unique_ptr<dwarf2_per_cu_data, dwarf2_per_cu_data_deleter>>, std::random_access_iterator_tag>, __gnu_debug::_Safe_iterator<__gnu_cxx::__normal_iterator<std::unique_ptr<dwarf2_per_cu_data, dwarf2_per_cu_data_deleter> *, std::__cxx1998::vector<std::unique_ptr<dwarf2_per_cu_data, dwarf2_per_cu_data_deleter>>>, std::vector<std::unique_ptr<dwarf2_per_cu_data, dwarf2_per_cu_data_deleter>>, std::random_access_iterator_tag>)>' has been explicitly marked deprecated here
+ { } _GLIBCXX17_DEPRECATED_SUGGEST("std::invoke_result");
+ ^
+ /usr/bin/../lib64/gcc/x86_64-pc-linux-gnu/12.1.1/../../../../include/c++/12.1.1/x86_64-pc-linux-gnu/bits/c++config.h:120:45: note: expanded from macro '_GLIBCXX17_DEPRECATED_SUGGEST'
+ # define _GLIBCXX17_DEPRECATED_SUGGEST(ALT) _GLIBCXX_DEPRECATED_SUGGEST(ALT)
+ ^
+ /usr/bin/../lib64/gcc/x86_64-pc-linux-gnu/12.1.1/../../../../include/c++/12.1.1/x86_64-pc-linux-gnu/bits/c++config.h:96:19: note: expanded from macro '_GLIBCXX_DEPRECATED_SUGGEST'
+ __attribute__ ((__deprecated__ ("use '" ALT "' instead")))
+ ^
+
+ It complains about the use of std::result_of, which is deprecated in
+ C++17 and removed in C++20:
+
+ https://en.cppreference.com/w/cpp/types/result_of
+
+ Given we'll have to transition to std::invoke_result eventually, make a
+ GDB wrapper to mimimc std::invoke_result, which uses std::invoke_result
+ for C++ >= 17 and std::result_of otherwise. This way, it will be easy
+ to remove the wrapper in the future, just replace gdb:: with std::.
+
+ Tested by building with gcc 12 in -std=c++11 and -std=c++17 mode, and
+ clang in -std=c++17 mode (I did not test fully with clang in -std=c++11
+ mode because there are other unrelated issues).
+
+ Change-Id: I50debde0a3307a7bc67fcf8fceefda51860efc1d
+
+2022-08-30 Tom Tromey <tromey@adacore.com>
+
+ Fix flush for sys.stderr
+ GDB overwrites Python's sys.stdout and sys.stderr, but does not
+ properly implement the 'flush' method -- it only ever will flush
+ stdout. This patch fixes the bug. I couldn't find a straightforward
+ way to write a test for this.
+
+ Fix gdb.flush documentation
+ The gdb.flush documentation does not mention the 'stream' argument in
+ the function signature, only in the description. This patch fixes the
+ oversight.
+
+2022-08-30 Nick Clifton <nickc@redhat.com>
+
+ BFD library: Use entry 0 in directory and filename tables of DWARF-5 debug info.
+ PR 29529
+ * dwarf2.c (struct line_info_table): Add new field:
+ use_dir_and_file_0.
+ (concat_filename): Use new field to help select the correct table
+ slot.
+ (read_formatted_entries): Do not skip entry 0.
+ (decode_line_info): Set new field depending upon the version of
+ DWARF being parsed. Initialise filename based upon the setting of
+ the new field.
+
+2022-08-30 Enze Li <enze.li@hotmail.com>
+
+ gdb: update ranged_breakpoint::print_one_detail in comments
+ The print_one_detail_ranged_breakpoint has been renamed to
+ ranged_breakpoint::print_one_detail in this commit:
+
+ commit ec45bb676c9c69c30783bcf35ffdac8280f3b8bc
+ Date: Sat Jan 15 16:34:51 2022 -0700
+
+ Convert ranged breakpoints to vtable ops
+
+ So their comments should be updated as well.
+
+2022-08-30 Nick Clifton <nickc@redhat.com>
+
+ Add a testcase for PR 29494.
+ PR 29494
+ * testsuite/gas/arm/pr29494.s: New test source file.
+ * testsuite/gas/arm/pr29494.d: New test driver.
+
+2022-08-30 liuzhensong <liuzhensong@loongson.cn>
+
+ LoongArch: Fix redefinition of "PACKAGE".
+ Running configure and make in binutils-gdb.
+
+ $ ./configure
+ $ make
+ In file included from ./as.h:37,
+ from ./config/loongarch-lex.l:21,
+ from config/loongarch-lex-wrapper.c:20:
+ ./config.h:206: error: “PACKAGE” redefined [-Werror]
+ #define PACKAGE "gas"
+ ...
+
+ gas/config
+ * loongarch-lex-wrapper.c
+
+2022-08-30 Tsukasa OI <research_trasio@irq.a4lg.com>
+
+ RISC-V: Add 'Zmmul' extension in assembler.
+ Three-part patch set from Tsukasa OI to support zmmul in assembler.
+
+ The 'Zmmul' is a RISC-V extension consisting of only multiply instructions
+ (a subset of 'M' which has multiply and divide instructions).
+
+ bfd/
+ * elfxx-riscv.c (riscv_implicit_subsets): Add 'Zmmul' implied by 'M'.
+ (riscv_supported_std_z_ext): Add 'Zmmul' extension.
+ (riscv_multi_subset_supports): Add handling for new instruction class.
+ gas/
+ * testsuite/gas/riscv/attribute-09.d: Updated implicit 'Zmmul' by 'M'.
+ * testsuite/gas/riscv/option-arch-02.d: Likewise.
+ * testsuite/gas/riscv/m-ext.s: New test.
+ * testsuite/gas/riscv/m-ext-32.d: New test (RV32).
+ * testsuite/gas/riscv/m-ext-64.d: New test (RV64).
+ * testsuite/gas/riscv/zmmul-32.d: New expected output.
+ * testsuite/gas/riscv/zmmul-64.d: Likewise.
+ * testsuite/gas/riscv/m-ext-fail-xlen-32.d: New test (failure
+ by using RV64-only instructions in RV32).
+ * testsuite/gas/riscv/m-ext-fail-xlen-32.l: Likewise.
+ * testsuite/gas/riscv/m-ext-fail-zmmul-32.d: New failure test
+ (RV32 + Zmmul but with no M).
+ * testsuite/gas/riscv/m-ext-fail-zmmul-32.l: Likewise.
+ * testsuite/gas/riscv/m-ext-fail-zmmul-64.d: New failure test
+ (RV64 + Zmmul but with no M).
+ * testsuite/gas/riscv/m-ext-fail-zmmul-64.l: Likewise.
+ * testsuite/gas/riscv/m-ext-fail-noarch-64.d: New failure test
+ (no Zmmul or M).
+ * testsuite/gas/riscv/m-ext-fail-noarch-64.l: Likewise.
+ include/
+ * opcode/riscv.h (enum riscv_insn_class): Added INSN_CLASS_ZMMUL.
+ ld/
+ * testsuite/ld-riscv-elf/attr-merge-arch-01.d: We don't care zmmul in
+ these testcases, so just replaced m by a.
+ * testsuite/ld-riscv-elf/attr-merge-arch-01a.s: Likewise.
+ * testsuite/ld-riscv-elf/attr-merge-arch-01b.s: Likewise.
+ * testsuite/ld-riscv-elf/attr-merge-arch-02.d: Likewise.
+ * testsuite/ld-riscv-elf/attr-merge-arch-02a.s: Likewise.
+ * testsuite/ld-riscv-elf/attr-merge-arch-03.d: Likewise.
+ * testsuite/ld-riscv-elf/attr-merge-arch-03a.s: Likewise.
+ * testsuite/ld-riscv-elf/attr-merge-user-ext-01.d: Likewise.
+ * testsuite/ld-riscv-elf/attr-merge-user-ext-rv32i2p1_a2p0.s: Renamed.
+ * testsuite/ld-riscv-elf/attr-merge-user-ext-rv32i2p1_a2p1.s: Renamed.
+ opcodes/
+ * riscv-opc.c (riscv_opcodes): Updated multiply instructions to zmmul.
+
+2022-08-30 Tom de Vries <tdevries@suse.de>
+
+ [gdb/symtab] Fix assert in set_length
+ When running the included test-case, we run into:
+ ...
+ (gdb) break _start^M
+ read.h:309: internal-error: set_length: \
+ Assertion `m_length == length' failed.^M
+ ...
+
+ The problem is that while there are two CUs:
+ ...
+ $ readelf -wi debug-names-missing-cu | grep @
+ Compilation Unit @ offset 0x0:
+ Compilation Unit @ offset 0x2d:
+ ...
+ the CU table in the .debug_names section only contains the first one:
+ ...
+ CU table:
+ [ 0] 0x0
+ ...
+
+ The incomplete CU table makes create_cus_from_debug_names_list set the size of
+ the CU at 0x0 to the actual size of both CUs combined.
+
+ This eventually leads to the assert, when we read the actual size from the CU
+ header.
+
+ While having an incomplete CU table in a .debug_names section is incorrect,
+ we need a better failure mode than asserting.
+
+ The easiest way to fix this is to set the length to 0 (meaning: unkown) in
+ create_cus_from_debug_names_list.
+
+ This makes the failure mode to accept the incomplete CU table, but to ignore
+ the missing CU.
+
+ It would be nice to instead reject the .debug_names index, and build a
+ complete CU list, but the point where we find this out is well after
+ dwarf2_initialize_objfile, so it looks rather intrusive to restart at that
+ point.
+
+ Tested on x86_64-linux.
+
+ Bug: https://sourceware.org/bugzilla/show_bug.cgi?id=29453
+
+2022-08-30 Tom de Vries <tdevries@suse.de>
+
+ [gdb/tdep] Declare score-*-* target obsolete
+ I tried out the script gdb/gdb_mbuild.sh, and ran into:
+ ...
+ score-elf ...
+ ... configure --target=score-elf
+ ... make score-elf
+ ... run score-elf
+ score-elf: gdb dumped core
+ Terminated
+ ...
+
+ Gdb runs into this internal error in initialize_current_architecture:
+ ...
+ if (! gdbarch_update_p (info))
+ internal_error (__FILE__, __LINE__,
+ _("initialize_current_architecture: Selection of "
+ "initial architecture failed"));
+ ...
+
+ The call to gdbarch_update_p fails because commit 575b4c298a6 ("gdb: Remove
+ support for S+core") removed support for the architecture.
+
+ Fix this by adding score-*-* to the list of obsolete targets in
+ gdb/configure.tgt, such that we're no longer able to build the configuration:
+ ...
+ *** Configuration score-unknown-elf is obsolete.
+ *** Support has been REMOVED.
+ make: *** [Makefile:12806: configure-gdb] Error 1
+ ...
+
+ Also remove the related line from the "Target Instruction Set Architectures"
+ list in gdb/MAINTAINERS, such that gdb/gdb_mbuild.sh no longer tries to build
+ it.
+
+2022-08-30 GDB Administrator <gdbadmin@sourceware.org>
+
+ Automatic date update in version.in
+
+2022-08-29 GDB Administrator <gdbadmin@sourceware.org>
+
+ Automatic date update in version.in
+
+2022-08-28 Alan Modra <amodra@gmail.com>
+
+ PR29494 Trailing jump table on ARM
+ out_inc_line_addr and relax_inc_line_addr are passed INT_MAX as
+ line_delta to flag end of section. This filters its way down to
+ size_inc_line_addr and emit_inc_line_addr. Pass line_delta on to
+ scale_addr_delta where it can be used to omit an unaligned opcode
+ error.
+
+ PR 29494
+ * dwarf2dbg.c (scale_addr_delta): Delete unnecessary forward decl.
+ Add line_delta param. Don't print error at end of section, just
+ round the address down.
+ (size_inc_line_addr, emit_inc_line_addr): Adjust calls.
+
+2022-08-28 GDB Administrator <gdbadmin@sourceware.org>
+
+ Automatic date update in version.in
+
+2022-08-27 rupothar <rupesh.potharla@amd.com>
+
+ bfd: Fix minor bug in read_indexed_address function.
+ read_indexed_address function is using offset_size instead of
+ addr_size while reading addrx forms.
+
+2022-08-27 GDB Administrator <gdbadmin@sourceware.org>
+
+ Automatic date update in version.in
+
+2022-08-26 Simon Marchi <simon.marchi@polymtl.ca>
+
+ gdbsupport: fix gdb::optional compilation with C++11 && _GLIBCXX_DEBUG
+ Similar to 911438f9f4 ("gdbsupport: fix array-view compilation with
+ c++11 && _GLIBCXX_DEBUG"), but for gdb::optional.
+
+ I get this error when building with Clang 14 and -std=c++11:
+
+ CXX agent.o
+ In file included from /home/simark/src/binutils-gdb/gdbsupport/agent.cc:20:
+ In file included from /home/simark/src/binutils-gdb/gdbsupport/common-defs.h:210:
+ In file included from /home/simark/src/binutils-gdb/gdbsupport/common-debug.h:23:
+ /home/simark/src/binutils-gdb/gdbsupport/../gdbsupport/gdb_optional.h:213:5: error: use of this statement in a constexpr function is a C++14 extension [-Werror,-Wc++14-extensions]
+ gdb_assert (this->has_value ());
+ ^
+ /home/simark/src/binutils-gdb/gdbsupport/gdb_assert.h:35:3: note: expanded from macro 'gdb_assert'
+ ((void) ((expr) ? 0 : \
+ ^
+
+ Change-Id: If0cf55607fc9dbd1925ccb97cd9abbf8993ff264
+
+2022-08-26 Simon Marchi <simon.marchi@polymtl.ca>
+
+ gdb: change bpstat_print's kind parameter to target_waitkind
+ Change from int to target_waitkind, which is really what is is. While
+ at it, remove some outdated doc. The return value is described by a
+ relatively self-describing enum, not a numerical value like the doc
+ says.
+
+ Change-Id: Id899c853a857c7891c45e5b1639024067d5b59cd
+
+2022-08-26 Simon Marchi <simon.marchi@efficios.com>
+
+ gdb, gdbsupport: configure: factor out yes/no/auto value checking
+ Factor out the code that checks that a value is yes/no or yes/no/auto.
+ Add two macros to gdbsupport/common.m4 and use them in gdb/configure.ac
+
+ I inspected the changes to configure. Other than whitespace changes, we
+ have some benign changes to the error messages (one of them had an error
+ actually). There are changes to the --enable-source-highlight and
+ --enable-libbacktrace handling, but setting enable_source_highlight /
+ enable_libbacktrace was not really useful anyway, they already had the
+ right value.
+
+ Change-Id: I92587aec36874309e1605e2d60244649f09a757a
+
+2022-08-26 Alan Modra <amodra@gmail.com>
+
+ PR12265, Compiling ld/ fails on Solaris 8
+ The fail was due to -Werror and headers included by dlfcn.h and
+ elf-bfd.h disagreeing about AT_DCACHEBSIZE and other AT_*. Not a
+ serious problem obviously, since release versions of binutils don't
+ enable -Werror and the defines are not used. Anyway, reduce the
+ number of files that might hit this problem by only including dlfcn.h
+ where it is needed.
+
+ PR 12265
+ * sysdep.h: Don't include dlfcn.h here.
+ * plugin.c: Include it here.
+
+2022-08-26 GDB Administrator <gdbadmin@sourceware.org>
+
+ Automatic date update in version.in
+
+2022-08-25 Philippe Waroquiers <philippe.waroquiers@skynet.be>
+
+ Allow to document user-defined aliases.
+ Compared to the previous version, this version fixes the comments reported by
+ Tom Tromey and ensures that the 'help some-user-documented-alias'
+ shows the alias definition to ensure the user understands this is an
+ alias even if specifically documented.
+
+ When using 'help ALIASNAME', GDB shows the help of the aliased command.
+ This is a good default behaviour.
+
+ However, GDB alias command allows to define aliases with arguments
+ possibly changing or tuning significantly the behaviour of
+ the aliased command. In such a case, showing the help of the aliased
+ command might not be ideal.
+
+ This is particularly true when defining an alias as a set of
+ nested 'with' followed by a last command to launch, such as:
+ (gdb) alias pp10 = with print pretty -- with print elements 10 -- print
+ Asking 'help pp10' shows the help of the 'with' command, which is
+ not particularly useful:
+ (gdb) help pp10
+ with, pp10, w
+ alias pp10 = with print pretty -- with print elements 10 -- print
+ Temporarily set SETTING to VALUE, run COMMAND, and restore SETTING.
+ Usage: with SETTING [VALUE] [-- COMMAND]
+ ....
+
+ Such an alias can now be documented by the user:
+ (gdb) document pp10
+ >Pretty printing an expressiong, printing 10 elements.
+ >Usage: pp10 [PRINT-COMMAND-OPTIONS] EXP
+ >See 'help print' for more information.
+ >end
+ (gdb) help pp10
+ alias pp10 = with print pretty -- with print elements 10 -- print
+ Pretty printing an expressiong, printing 10 elements.
+ Usage: pp10 [PRINT-COMMAND-OPTIONS] EXP
+ See 'help print' for more information.
+ (gdb)
+
+ When a user-defined alias is documented specifically, help and apropos
+ use the provided alias documentation instead of the documentation of
+ the aliased command.
+
+ Such a documented alias is also not shown anymore in the help of the
+ aliased command, and the alias is not listed anymore in the help
+ of the aliased command. In particular for cases such as pp10 example above,
+ indicating that pp10 is an alias of the 'with' command is confusing.
+
+2022-08-25 Jan-Benedict Glaw <jbglaw@lug-owl.de>
+
+ sim/aarch64: Fix aarch64_get_CPSR_bits() declaration
+ Noticed while doing mass builds with a very recent GCC:
+
+ /usr/lib/gcc-snapshot/bin/gcc -DHAVE_CONFIG_H -DWITH_HW=1 -DHAVE_DV_SOCKSER -DDEFAULT_INLINE=0 -Wall -Wdeclaration-after-statement -Wpointer-arith -Wno-unused -Wunused-value -Wunused-function -Wno-switch -Wno-char-subscripts -Wempty-body -Wunused-but-set-parameter -Wno-error=maybe-uninitialized -Wmissing-declarations -Wmissing-prototypes -Wdeclaration-after-statement -Wmissing-parameter-type -Wpointer-sign -Wold-style-declaration -Werror -I. -I/var/lib/laminar/run/gdb-aarch64-elf/1/binutils-gdb/sim/aarch64 -I../common -I/var/lib/laminar/run/gdb-aarch64-elf/1/binutils-gdb/sim/aarch64/../common -I../../include -I/var/lib/laminar/run/gdb-aarch64-elf/1/binutils-gdb/sim/aarch64/../../include -I../../bfd -I/var/lib/laminar/run/gdb-aarch64-elf/1/binutils-gdb/sim/aarch64/../../bfd -I../../opcodes -I/var/lib/laminar/run/gdb-aarch64-elf/1/binutils-gdb/sim/aarch64/../../opcodes -I../.. -I/var/lib/laminar/run/gdb-aarch64-elf/1/binutils-gdb/sim/aarch64/../../gnulib/import -I../../gnulib/import -g -O2 -c -o cpustate.o -MT cpustate.o -MMD -MP -MF .deps/cpustate.Tpo cpustate.c
+ cpustate.c:270:1: error: conflicting types for 'aarch64_get_CPSR_bits' due to enum/integer mismatch; have 'uint32_t(sim_cpu *, FlagMask)' {aka 'unsigned int(struct _sim_cpu *, FlagMask)'} [-Werror=enum-int-mismatch]
+ 270 | aarch64_get_CPSR_bits (sim_cpu *cpu, FlagMask mask)
+ | ^~~~~~~~~~~~~~~~~~~~~
+ In file included from sim-main.h:30,
+ from cpustate.c:28:
+ cpustate.h:310:20: note: previous declaration of 'aarch64_get_CPSR_bits' with type 'uint32_t(sim_cpu *, uint32_t)' {aka 'unsigned int(struct _sim_cpu *, unsigned int)'}
+ 310 | extern uint32_t aarch64_get_CPSR_bits (sim_cpu *, uint32_t);
+ | ^~~~~~~~~~~~~~~~~~~~~
+ cc1: all warnings being treated as errors
+
+2022-08-25 H.J. Lu <hjl.tools@gmail.com>
+
+ x86: Ignore protected visibility in shared libraries on Solaris
+ On x86, the PLT entry in executable may be used as function address for
+ functions in shared libraries. If functions are protected, the function
+ address used in executable can be different from the function address
+ used in shared library. This will lead to incorrect run-time behavior
+ if function pointer equality is needed. By default, x86 linker issues
+ an error in this case.
+
+ On Solaris, linker issued an error for
+
+ struct tm *tb = (kind == CPP_time_kind::FIXED ? gmtime : localtime) (&tt);
+
+ where gmtime is a protected function in libc.so. Use gmtime's PLT entry
+ in executable as function address is safe since function pointer equality
+ isn't needed. Ignore protected visibility in shared libraries on Solaris
+ to disable linker error. If function pointer equality is needed, linker
+ will silently generate executable with incorrect run-time behavior on
+ Solaris.
+
+ PR ld/29512
+ * elf32-i386.c (elf_i386_scan_relocs): Ignore protected
+ visibility in shared libraries on Solaris.
+ * elf64-x86-64.c (elf_x86_64_scan_relocs): Likewise.
+
+2022-08-25 Nick Clifton <nickc@redhat.com>
+
+ GAS: Add a return type tag to DWARF DIEs generated for function symbols.
+ PR 29517
+ * dwarf2dbg.c (GAS_ABBREV_COMP_UNIT): New defined constant.
+ (GAS_ABBREV_SUBPROG): New defined constant.
+ (GAS_ABBREV_NO_TYPE): New defined constant.
+ (out_debug_abbrev): Use the new defined constants when emitting
+ abbreviation numbers. Generate an abbreviation for an unspecified
+ type.
+ (out_debug_info): Use the new defined constants when referring to
+ abbreviations. Generate a use of the no_type abbreviation.
+ Reference the use when generating DIEs for functions.
+ * testsuite/gas/elf/dwarf-3-func.d: Update to allow for newly
+ extended output from the assembler.
+ * testsuite/gas/elf/dwarf-5-func-global.d: Likewise.
+ * testsuite/gas/elf/dwarf-5-func-local.d: Likewise.
+ * testsuite/gas/elf/dwarf-5-func.d: Likewise.
+
+ GAS: Allow AArch64 pseudo-ops to accept the command line separator character.
+ PR 29519
+ * config/tc-aarch64.c (s_unreq): Use find_end_of_line().
+ (s_aarch64_cpu): Likewise.
+ (s_aarch64_arch): Likewise.
+ (s_aarch64_arch_extension): Likewise.
+ * testsuite/gas/aarch64/pr29519.d: New test driver file.
+ * testsuite/gas/aarch64/pr29519.s: New test source file.
+
+2022-08-25 Palmer Dabbelt <palmer@rivosinc.com>
+
+ gas: NEWS: Add the RISC-V features for 2.39
+
+ gas: NEWS: Add the RISC-V features for 2.38
+
+ gas: NEWS: Add the RISC-V features for 2.37
+
+ gas: NEWS: Add the RISC-V features for 2.36
+
+ gas: NEWS: Add the RISC-V features for 2.35
+
+ gas: NEWS: Add the RISC-V features for 2.31
+
+2022-08-25 Alan Modra <amodra@gmail.com>
+
+ PR11290, avr-ld "out of range error" is confusing
+ Don't overload bfd_reloc_outofrange with what is really a domain error
+ (target at odd address), or an overflow.
+
+ PR 11290
+ * reloc.c (bfd_reloc_other): Correct comment.
+ * elf32-avr.c (avr_final_link_relocate): Return bfd_reloc_other
+ for unaligned reloc target values. Return bfd_reloc_overflow
+ when stubs are too far away and when R_AVR_LDS_STS_16,
+ R_AVR_PORT6, or R_AVR_PORT5 overflow.
+ (elf32_avr_relocate_section): Report more descriptive relocation
+ errors.
+ * bfd-in2.h: Regenerate.
+
+2022-08-25 Martin Storsjö <martin@martin.st>
+
+ ld: pe: Move the return type to a separate line from the function name
+ This fixes the coding style of an old, preexisting function.
+
+2022-08-25 Alan Modra <amodra@gmail.com>
+
+ PR10372, SH: ld test with sim/sh/run fails always
+ PR 10372
+ * testsuite/ld-sh/start.s: Add _start sym. Use trapa 34. Create
+ an alloc .stack section.
+
+2022-08-25 Alan Modra <amodra@gmail.com>
+
+ Re: LoongArch: ld: Fix bug not generate plt when link a dso
+ Fixes loongarch32-elf +FAIL: medium jirl plt
+
+ * testsuite/ld-loongarch-elf/cmodel.exp: Don't run test when
+ no shared library support.
+
+2022-08-25 GDB Administrator <gdbadmin@sourceware.org>
+
+ Automatic date update in version.in
+
+2022-08-24 Martin Storsjö <martin@martin.st>
+
+ ld: pe: Make archive member file extension comparisons case insensitive when cross compiling too
+ On Windows, filename_cmp is case insensitive, but when cross compiling
+ with libraries that may contain members with uppercase file names, we
+ should keep those comparisons case insensitive when running the build
+ tools on other OSes too.
+
+ Also make the check for .def consistent with the other ones, fixing
+ out of bounds reads if file names are shorter than 4 characters.
+
+2022-08-24 Richard Earnshaw <rearnsha@arm.com>
+
+ gas: arm: handle multiple .directives on a single line (PR29519)
+ There's been a long-standing bug in the arm backend where
+ target-specific directives did not correctly handle lines with
+ multiple statements. This patch fixes the issue for all the cases
+ I've been able to find.
+
+ It does result in a slight change in behaviour when errors are
+ encountered: where, previously,
+
+ .cpu arm6 bar
+
+ would result in the error "junk at end of line, first unrecognized
+ character is `b'", we now get "unknown cpu `arm6 bar'", which I think
+ is slightly more helpful anyway. Similar errors are generated for
+ other directives.
+
+2022-08-24 Andrew Burgess <aburgess@redhat.com>
+
+ gdb: new 'maint print frame-id' command
+ When debugging a certain class of GDB bug, I often end up wanting to
+ know what GDB thinks the frame-id is in a particular frame. It's
+ not too hard to pull this from some debug output, but I thought it
+ might be nice if there was a maintenance command that could tell us.
+
+ This commit adds 'maint print frame-id' which prints the frame-id of
+ the currently selected frame. You can also pass a frame level number
+ to find the frame-id for a specific frame.
+
+ There's a new test too.
+
+2022-08-24 liuzhensong <liuzhensong@loongson.cn>
+
+ LoongArch: ld: Fix bug not generate plt when link a dso
+ Fix the bug that can not generate func@plt
+ when linking a undefined function with cmodel=medium.
+ Add testcase.
+
+ bfd/
+ * elfnn-loongarch.c
+ ld/testsuite/ld-loongarch-elf/
+ * cmodel-libjirl.dd
+ * cmodel.exp
+ * libjirl.s
+
+2022-08-24 GDB Administrator <gdbadmin@sourceware.org>
+
+ Automatic date update in version.in
+
+2022-08-23 Alan Modra <amodra@gmail.com>
+
+ SHT_RELR sh_link and sh_info
+ I don't think it makes any sense for a SHT_RELR section to specify a
+ symbol table with sh_link. SHT_RELR relocations don't use symbols.
+ There is no real need to specify sh_info either, SHT_RELR is not for
+ relocatable object files. Anyway, fuzzers of course don't restrict
+ themselves to even half-sensible objects. So they found a hole in
+ objcopy using a non-alloc SHT_RELR in an ET_EXEC. In that case BFD
+ set up the SHT_RELR section as if it were a SHT_REL against the
+ sh_info target section. When it came to reading in the target section
+ relocs, the count was horribly wrong which caused a buffer overflow.
+
+ * elf.c (bfd_section_from_shdr <SHT_RELR>): Always just make a
+ normal section, don't treat it as a reloc section.
+
+2022-08-23 Alan Modra <amodra@gmail.com>
+
+ Re: bfd_elf_set_group_contents assertion
+ Further to commit 7744e3278b9f.
+
+ * elf.c (bfd_elf_set_group_contents): Restrict loc in loop writing
+ contents, and add another assertion.
+
+2022-08-23 Nick Clifton <nickc@redhat.com>
+
+ Add an option to dlltool to allow the creation of deterministic libraries.
+ PR 29489
+ * dlltool.c (deterministic): New variable.
+ (gen_lib_file): If deterministic is true set the
+ BFD_DETERMINISTIC_OUTPUT flag.
+ (usage): Mention --deterministic-libraries and
+ --non-deterministic-libraries.
+ (long_options): Add new options.
+ (main): Parse new options.
+ * doc/binutils.texi: Document the new options.
+ * NEWS: Mention the new feature.
+
+2022-08-23 Nelson Chu <nelson@rivosinc.com>
+
+ binutils: Updated my email address.
+ binutils/
+ * MAINTAINERS (RISC-V): Updated my email address.
+
+2022-08-23 GDB Administrator <gdbadmin@sourceware.org>
+
+ Automatic date update in version.in
+
+2022-08-22 Tom Tromey <tromey@adacore.com>
+
+ Implement target async for Windows
+ This implements target async for Windows. The basic idea is to have
+ the worker thread block in WaitForDebugEvent, then notify the event
+ loop when an event is seen. In a few situations, this blocking
+ behavior is undesirable, so the functions passed to do_synchronously
+ are changed to return a boolean indicating which behavior is needed.
+
+2022-08-22 Tom Tromey <tromey@adacore.com>
+
+ Move some Windows operations to worker thread
+ On Windows, certain debugging APIs can only be called from the thread
+ that started (or attached) to the inferior. Also, there is no way on
+ Windows to wait for a debug event in addition to other events.
+ Therefore, in order to implement target async for Windows, gdb will
+ have to call some functions in a worker thread.
+
+ This patch implements the worker thread and moves the necessary
+ operations there. Target async isn't yet implemented, so this patch
+ does not cause any visible changes.
+
+2022-08-22 Tom Tromey <tromey@adacore.com>
+
+ Avoid crash with Ravenscar tasks
+ When using Ravenscar, gdb can crash if the user sets a breakpoint very
+ early in task startup. This happens because gdb thinks the runtime is
+ initialized, but in practice the particular task isn't sufficiently
+ initialized. This patch avoids the issue by turning an assertion into
+ an early return.
+
+ I tested this using the AdaCore internal test suite. I don't know how
+ to test Ravenscar using the FSF test suite.
+
+2022-08-22 Nick Clifton <nickc@redhat.com>
+
+ Fix compile time warning from Clang about error messages not being printed safely.
+
+ Have readelf warn users if it is asked to decode a LLVM bitcode file or a golang object file.
+ * readelf.c (check_magic_number): New function. Checks the magic
+ bytes at the start of a file. If they are not the ELF format
+ magic values, then attempts to generate a helpful error message.
+ (process_file_header): Call check_magic_number.
+
+2022-08-22 Frederic Cambus <fred@statdns.com>
+
+ Add OpenBSD AArch64 Little Endian BFD support.
+ * config.bfd (aarch64-*-openbsd*): Add target.
+
+2022-08-22 tangxiaolin <tangxiaolin@loongson.cn>
+
+ LoongArch: gas: add support using constant variable in instructions.
+ Instructions that can load immediate support using constant
+ variable like ".equ var, 123 li.w/d resgister, var".
+
+ gas/
+ * config/loongarch-parse.y
+ * config/tc-loongarch.c
+
+ Add four testcases.One is a program using constant variable,
+ one test using label is unsupported, and another two test
+ almost instructions that can load immediate.
+
+ gas/
+ * testsuite/gas/loongarch/li.d
+ * testsuite/gas/loongarch/li.s
+ * testsuite/gas/loongarch/imm_ins_label-fail.d
+ * testsuite/gas/loongarch/imm_ins_label-fail.l
+ * testsuite/gas/loongarch/imm_ins_label-fail.s
+ * testsuite/gas/loongarch/imm_ins.d
+ * testsuite/gas/loongarch/imm_ins.s
+ * testsuite/gas/loongarch/imm_ins_32.d
+ * testsuite/gas/loongarch/imm_ins_32.s
+
+2022-08-22 GDB Administrator <gdbadmin@sourceware.org>
+
+ Automatic date update in version.in
+
+2022-08-21 Tom Tromey <tom@tromey.com>
+
+ Fix crash in gdbpy_parse_register_id
+ I noticed that gdbpy_parse_register_id would assert if passed a Python
+ object of a type it was not expecting. The included test case shows
+ this crash. This patch fixes the problem and also changes
+ gdbpy_parse_register_id to be more "Python-like" -- it always ensures
+ the Python error is set when it fails, and the callers now simply
+ propagate the existing exception.
+
+2022-08-21 GDB Administrator <gdbadmin@sourceware.org>
+
+ Automatic date update in version.in
+
+2022-08-20 Alan Modra <amodra@gmail.com>
+
+ symbols for bfd_simple_get_relocated_section_contents
+ If symbols are provided by the caller of this function they are
+ passed on to bfd_get_relocated_section_contents. No surprises there.
+ It gets a little weird if they are not provided. In that case they
+ are read from the bfd by _bfd_generic_link_add_symbols, and global
+ symbols are added to the generic linker hash table. Global symbols
+ are not added to the linker hash table if symbols *are* provided. Now
+ the linker hash table symbols are not used by the generic
+ bfd_get_relocated_section_conents, and also not by most target
+ versions when called from bfd_simple_get_relocated_section_contents
+ except for symbols like "_gp". So it mostly doesn't matter whether
+ symbols are in the linker hash table, but it's odd that there is a
+ difference. We could always add them, but I'm inclined to think that
+ is unnecessary work so this patch always leaves them out.
+
+ Also, symbols are canonicalized and written into a malloc'd buffer.
+ The buffer isn't freed, see commit 8e16317ca5eb. I don't know whether
+ that matters any more, but in any case I can't see why we need another
+ copy of the symbols when _bfd_generic_link_read_symbols has already
+ cached symbols.
+
+ * simple.c (bfd_simple_get_relocated_section_contents): If not
+ provided, read symbols via bfd_generic_link_read_symbols. Do
+ not create another copy of symbols. Tidy failure exits.
+ Minor tidy of bfd_get_relocated_section_contents and
+ bfd_get_full_section_contents arguments.
+
+2022-08-20 Alan Modra <amodra@gmail.com>
+
+ Re: Missing linking test case for pe dll using a def file
+ Fixes this when cross-compiling from x86_64-linux
+ x86_64-w64-mingw32 +FAIL: compiling shared lib fastcall/stdcall
+
+ * testsuite/ld-pe/pe-run2-def.exp (test_direct2_link_dll_def):
+ Use CC_FOR_TARGET and CFLAGS_FOR_TARGET rather than CC and CFLAGS.
+
+2022-08-20 GDB Administrator <gdbadmin@sourceware.org>
+
+ Automatic date update in version.in
+
+2022-08-19 Patrick Monnerat <patrick@monnerat.net>
+
+ gdb_do_one_event: use integer test syntax
+ Timeout is an int, not a bool.
+
+2022-08-19 Tom Tromey <tom@tromey.com>
+
+ Remove two initialization functions
+ I noticed a couple of initialization functions that aren't really
+ needed, and that currently require explicit calls in gdb_init. This
+ patch removes these functions, simplifying gdb a little.
+
+ Regression tested on x86-64 Fedora 34.
+
+2022-08-19 Simon Marchi <simon.marchi@efficios.com>
+
+ gdb/testsuite: re-compile entry-value-typedef .S files with -fPIE
+ As Luis pointed out here [1], the AArch64 variant of the test doesn't
+ work on systems that use PIE by default. For example, on this Debian
+ 11:
+
+ $ make check TESTS="gdb.dwarf2/entry-value-typedef.exp"
+ gdb compile failed, /usr/bin/ld: /tmp/ccJE8ZSr.o: relocation R_AARCH64_ADR_PREL_PG_HI21 against symbol `_ZNSsD1Ev@@GLIBCXX_3.4' which may bind externally can not be used when making a shared object; recompile with -fPIC
+ /usr/bin/ld: /tmp/ccJE8ZSr.o(.text+0x38): unresolvable R_AARCH64_ADR_PREL_PG_HI21 relocation against symbol `_ZNSsD1Ev@@GLIBCXX_3.4'
+
+ This is because entry-value-typedef-aarch64.S was generated on an old
+ system that does not generate position-independent code by default, but
+ the system the test runs on tries to link the test executable as
+ position-independent. Fix this by regenerating the same binary on the
+ same system as the original one, but with -fPIE this time. Do the same
+ for the amd64 binary, although this one was already position-independent
+ so the generated code doesn't change.
+
+ With this patch applied, the test passes on the Debian 11 AArch64
+ system.
+
+ [1] https://sourceware.org/pipermail/gdb-patches/2022-August/191462.html
+
+ Change-Id: I68d55adaa56a7a3eddb0c13980b1a98b791f8144
+
+2022-08-19 Felix Willgerodt <felix.willgerodt@intel.com>
+
+ gdb, testsuite: Adapt gdb.base/callfuncs.exp for new clang warning.
+ Clang 15.0.0 enabled the warning for deprecated non-prototype functions
+ by default: https://reviews.llvm.org/D122895
+ Callfuncs.exp is impacted and won't run due to new warnings:
+
+ callfuncs.c:339:5: warning: a function declaration without a prototype is
+ deprecated in all versions of C and is not supported in C2x
+ [-Wdeprecated-non-prototype]
+ int t_float_values (float_arg1, float_arg2)
+
+ This patch disables those warnings with -Wno-deprecated-non-prototype.
+ Removing the test for deprecated syntax would also be an option. But I will
+ leave that up for others to decide/implement.
+
+2022-08-19 Felix Willgerodt <felix.willgerodt@intel.com>
+
+ gdb, testsuite: Enable testcases that suppress specific warnings, for icc/icx.
+ To cite gdb.exp:
+ Some C/C++ testcases unconditionally pass -Wno-foo as additional
+ options to disable some warning. That is OK with GCC, because
+ by design, GCC accepts any -Wno-foo option, even if it doesn't
+ support -Wfoo. Clang however warns about unknown -Wno-foo by
+ default, unless you pass -Wno-unknown-warning-option as well.
+ We do that here, so that individual testcases don't have to
+ worry about it.
+
+ This patch adds the same option that already exists for clang for icx and
+ adds the equivalent icc option.
+
+2022-08-19 Tiezhu Yang <yangtiezhu@loongson.cn>
+
+ gdb: LoongArch: Handle variadic arguments
+ According to LoongArch ELF ABI specification [1], variadic arguments
+ are passed in GARs in the same manner as named arguments. And after
+ a variadic argument has been passed on the stack, all future arguments
+ will also be passed on the stack, i.e., the last argument register may
+ be left unused due to the aligned register pair rule. long double data
+ tpye is passed in an aligned GAR pair, the first register in the pair
+ is even-numbered.
+
+ [1] https://loongson.github.io/LoongArch-Documentation/LoongArch-ELF-ABI-EN.html
+
+2022-08-19 Alan Modra <amodra@gmail.com>
+
+ loongarch64_pei_vec garbage in objcopy'd relocs
+ Like commit a9c09a3667cc, but for loongarch64.
+
+ * coff-loongarch64.c (SWAP_IN_RELOC_OFFSET): Define.
+ (SWAP_OUT_RELOC_OFFSET): Define.
+
+2022-08-19 GDB Administrator <gdbadmin@sourceware.org>
+
+ Automatic date update in version.in
+
+2022-08-18 Vladimir Mezentsev <vladimir.mezentsev@oracle.com>
+
+ gprofng: fix bug 29479 Collection fails when built without java support
+ gprofng/ChangeLog
+ 2022-08-17 Vladimir Mezentsev <vladimir.mezentsev@oracle.com>
+
+ PR gprofng/29479
+ * libcollector/collector.c: Add #if defined(GPROFNG_JAVA_PROFILING) for
+ java specific code.
+ * libcollector/unwind.c: Likewise.
+
+2022-08-18 Simon Marchi <simon.marchi@polymtl.ca>
+
+ gdb: call check_typedef at beginning of dwarf_expr_context::fetch_result
+ Bug 29374 shows this crash:
+
+ $ ./gdb -nx --data-directory=data-directory -q -batch -ex "catch throw" -ex r -ex bt a.out
+ ...
+ /home/simark/src/binutils-gdb/gdb/../gdbsupport/array-view.h:217: internal-error: copy: Assertion `dest.size () == src.size ()' failed.
+
+ The backtrace is:
+
+ #0 internal_error (file=0x5555606504c0 "/home/simark/src/binutils-gdb/gdb/../gdbsupport/array-view.h", line=217, fmt=0x55556064b700 "%s: Assertion `%s' failed.") at /home/simark/src/binutils-gdb/gdbsupport/errors.cc:51
+ #1 0x000055555d41c0bb in gdb::copy<unsigned char const, unsigned char> (src=..., dest=...) at /home/simark/src/binutils-gdb/gdb/../gdbsupport/array-view.h:217
+ #2 0x000055555deef28c in dwarf_expr_context::fetch_result (this=0x7fffffffb830, type=0x621007a86830, subobj_type=0x621007a86830, subobj_offset=0, as_lval=false) at /home/simark/src/binutils-gdb/gdb/dwarf2/expr.c:1040
+ #3 0x000055555def0015 in dwarf_expr_context::evaluate (this=0x7fffffffb830, addr=0x62f00004313e "0", len=1, as_lval=false, per_cu=0x60b000069550, frame=0x621007c9e910, addr_info=0x0, type=0x621007a86830, subobj_type=0x621007a86830, subobj_offset=0) at /home/simark/src/binutils-gdb/gdb/dwarf2/expr.c:1091
+ #4 0x000055555e084327 in dwarf2_evaluate_loc_desc_full (type=0x621007a86830, frame=0x621007c9e910, data=0x62f00004313e "0", size=1, per_cu=0x60b000069550, per_objfile=0x613000006080, subobj_type=0x621007a86830, subobj_byte_offset=0, as_lval=false) at /home/simark/src/binutils-gdb/gdb/dwarf2/loc.c:1485
+ #5 0x000055555e0849e2 in dwarf2_evaluate_loc_desc (type=0x621007a86830, frame=0x621007c9e910, data=0x62f00004313e "0", size=1, per_cu=0x60b000069550, per_objfile=0x613000006080, as_lval=false) at /home/simark/src/binutils-gdb/gdb/dwarf2/loc.c:1529
+ #6 0x000055555e0828c6 in dwarf_entry_parameter_to_value (parameter=0x621007a96e58, deref_size=0x0, type=0x621007a86830, caller_frame=0x621007c9e910, per_cu=0x60b000069550, per_objfile=0x613000006080) at /home/simark/src/binutils-gdb/gdb/dwarf2/loc.c:1235
+ #7 0x000055555e082f55 in value_of_dwarf_reg_entry (type=0x621007a86890, frame=0x621007acc510, kind=CALL_SITE_PARAMETER_DWARF_REG, kind_u=...) at /home/simark/src/binutils-gdb/gdb/dwarf2/loc.c:1332
+ #8 0x000055555e083449 in value_of_dwarf_block_entry (type=0x621007a86890, frame=0x621007acc510, block=0x61e000033568 "T\004\205\001\240\004\004\243\001T\237\004\240\004\261\004\001T\004\261\004\304\005\004\243\001T\237\004\304\005\310\005\001T\004\310\005\311\005\004\243\001T\237", block_len=1) at /home/simark/src/binutils-gdb/gdb/dwarf2/loc.c:1365
+ #9 0x000055555e094d40 in loclist_read_variable_at_entry (symbol=0x621007a99bd0, frame=0x621007acc510) at /home/simark/src/binutils-gdb/gdb/dwarf2/loc.c:3889
+ #10 0x000055555f5192e0 in read_frame_arg (fp_opts=..., sym=0x621007a99bd0, frame=0x621007acc510, argp=0x7fffffffbf20, entryargp=0x7fffffffbf60) at /home/simark/src/binutils-gdb/gdb/stack.c:559
+ #11 0x000055555f51c352 in print_frame_args (fp_opts=..., func=0x621007a99ad0, frame=0x621007acc510, num=-1, stream=0x6030000bad90) at /home/simark/src/binutils-gdb/gdb/stack.c:887
+ #12 0x000055555f521919 in print_frame (fp_opts=..., frame=0x621007acc510, print_level=1, print_what=LOCATION, print_args=1, sal=...) at /home/simark/src/binutils-gdb/gdb/stack.c:1390
+ #13 0x000055555f51f22e in print_frame_info (fp_opts=..., frame=0x621007acc510, print_level=1, print_what=LOCATION, print_args=1, set_current_sal=0) at /home/simark/src/binutils-gdb/gdb/stack.c:1116
+ #14 0x000055555f526c6d in backtrace_command_1 (fp_opts=..., bt_opts=..., count_exp=0x0, from_tty=0) at /home/simark/src/binutils-gdb/gdb/stack.c:2079
+ #15 0x000055555f527ae5 in backtrace_command (arg=0x0, from_tty=0) at /home/simark/src/binutils-gdb/gdb/stack.c:2198
+
+ The problem is that the type that gets passed down to
+ dwarf_expr_context::fetch_result (the type of a variable of which we're
+ trying to read the entry value) is a typedef whose size has never been
+ computed yet (check_typedef has never been called on it). As we get in
+ the DWARF_VALUE_STACK case (line 1028 of dwarf2/expr.c), the `len`
+ variable is therefore set to 0, instead of the actual type length. We
+ then call allocate_value on subobj_type, which does call check_typedef,
+ so the length of the typedef gets filled in at that point. We end up
+ passing to the copy function a source array view of length 0 and a
+ target array view of length 4, and the assertion fails.
+
+ Fix this by calling check_typedef on both type and subobj_type at the
+ beginning of fetch_result.
+
+ I tried writing a test for this using the DWARF assembler, but I haven't
+ succeeded. It's possible that we need to get into this specific code
+ path (value_of_dwarf_reg_entry and all) to manage to get to
+ dwarf_expr_context::fetch_result with a typedef type that has never been
+ resolved. In all my attempts, the typedef would always be resolved
+ already, so the bug wouldn't show up.
+
+ As a fallback, I made a gdb.dwarf2 test with compiler-generated .S
+ files. I don't particularly like those, but I think it's better than no
+ test. The .cpp source code is the smallest reproducer I am able to make
+ from the reproducer given in the bug (thanks to Pedro for suggestions on
+ how to minimize it further than I had). Since I tested on both amd64
+ and aarch64, I added versions of the test for these two architectures.
+
+ Change-Id: I182733ad08e34df40d8bcc47af72c482fabf4900
+ Bug: https://sourceware.org/bugzilla/show_bug.cgi?id=29374
+
+2022-08-18 Luis Machado <luis.machado@arm.com>
+
+ [aarch64] Remove handling of ADR/ADRP from prologue analyzer
+ As reported by Tom in https://sourceware.org/pipermail/gdb-patches/2022-August/191357.html,
+ the aarch64 prologue analyzer considers the adrp instruction in the
+ gdb.dwarf2/dw2-dir-file-name.exp testcase to be part of a prologue.
+
+ The function has no prologue though, and it only loads the volatile variable
+ from memory. GDB should not skip any instructions in this case.
+
+ Doing some archaeology, it seems handling for adr/adrp in prologues was
+ included with the original aarch64 port. It might've been an oversight.
+
+ In the particular case of gdb.dwarf2/dw2-dir-file-name.exp, the analyzer skips
+ a couple instructions and leaves us in a nice spot where the address to the
+ variable "v" is already in w0. But no prologues exists.
+
+ Bug: https://sourceware.org/bugzilla/show_bug.cgi?id=29481
+
+2022-08-18 Tom Tromey <tom@tromey.com>
+
+ Change bookmark allocation
+ This changes how bookmarks are allocated and stored, replacing a
+ linked list with a vector and removing some ALL_* iterator macros.
+ Regression tested on x86-64 Fedora 34.
+
+2022-08-18 Thiago Jung Bauermann <thiago.bauermann@linaro.org>
+
+ Add test for AArch64 Scalable Vector Extension
+ It exercises a bug that GDB previously had where it would lose track of
+ some registers when the inferior changed its vector length.
+
+ It also checks that the vg register and the size of the z0-z31 registers
+ correctly reflect the new vector length.
+
+2022-08-18 Thiago Jung Bauermann <thiago.bauermann@linaro.org>
+
+ Fix thread's gdbarch when SVE vector length changes
+ When the inferior program changes the SVE length, GDB can stop tracking
+ some registers as it obtains the new gdbarch that corresponds to the
+ updated length:
+
+ Breakpoint 1, do_sve_ioctl_test () at sve-ioctls.c:44
+ 44 res = prctl(PR_SVE_SET_VL, i, 0, 0, 0, 0);
+ (gdb) print i
+ $2 = 32
+ (gdb) info registers
+ ⋮
+ [ snip registers x0 to x30 ]
+ ⋮
+ sp 0xffffffffeff0 0xffffffffeff0
+ pc 0xaaaaaaaaa8ac 0xaaaaaaaaa8ac <do_sve_ioctl_test+112>
+ cpsr 0x60000000 [ EL=0 BTYPE=0 C Z ]
+ fpsr 0x0 0
+ fpcr 0x0 0
+ vg 0x8 8
+ tpidr 0xfffff7fcb320 0xfffff7fcb320
+ (gdb) next
+ 45 if (res < 0) {
+ (gdb) info registers
+ ⋮
+ [ snip registers x0 to x30 ]
+ ⋮
+ sp 0xffffffffeff0 0xffffffffeff0
+ pc 0xaaaaaaaaa8cc 0xaaaaaaaaa8cc <do_sve_ioctl_test+144>
+ cpsr 0x200000 [ EL=0 BTYPE=0 SS ]
+ fpsr 0x0 0
+ fpcr 0x0 0
+ vg 0x4 4
+ (gdb)
+
+ Notice that register tpidr disappeared when vg (which holds the vector
+ length) changed from 8 to 4. The tpidr register is provided by the
+ org.gnu.gdb.aarch64.tls feature.
+
+ This happens because the code that searches for a new gdbarch to match the
+ new vector length in aarch64_linux_nat_target::thread_architecture doesn't
+ take into account the features present in the target description associated
+ with the previous gdbarch. This patch makes it do that.
+
+ Since the id member of struct gdbarch_info is now unused, it's removed.
+
+2022-08-18 Ralf Habacker <ralf.habacker@freenet.de>
+
+ Missing linking test case for pe dll using a def file.
+ PR 28362
+ * testsuite/ld-pe/pe-run2-def.exp: New file.
+
+2022-08-18 Patrick Monnerat <patrick@monnerat.net>
+
+ gdbsupport/event-loop: add a timeout parameter to gdb_do_one_event
+ Since commit b2d8657, having a per-interpreter event/command loop is not
+ possible anymore.
+
+ As Insight uses a GUI that has its own event loop, gdb and GUI event
+ loops have then to be "merged" (i.e.: work together). But this is
+ problematic as gdb_do_one_event is not aware of this alternate event
+ loop and thus may wait forever.
+
+ A solution is to delegate GUI events handling to the gdb events handler.
+ Insight uses Tck/Tk as GUI and the latter offers a "notifier" feature to
+ implement such a delegation. The Tcl notifier spec requires the event wait
+ function to support a timeout parameter. Unfortunately gdb_do_one_event
+ does not feature such a parameter.
+ This timeout cannot be implemented externally with a gdb timer, because
+ it would become an event by itself and thus can cause a legitimate event to
+ be missed if the timeout is 0.
+ Tcl implements "idle events" that are (internally) triggered only when no
+ other event is pending. For this reason, it can call the event wait function
+ with a 0 timeout quite often.
+
+ This patch implements a wait timeout to gdb_do_one_event. The initial
+ pending events monitoring is performed as before without the possibility
+ to enter a wait state. If no pending event has been found during this
+ phase, a timer is then created for the given timeout in order to re-use
+ the implemented timeout logic and the event wait is then performed.
+ This "internal" timer only limits the wait time and should never be triggered.
+ It is deleted upon gdb_do_one_event exit.
+
+ The new parameter defaults to "no timeout" (-1): as it is used by Insight
+ only, there is no need to update calls from the gdb source tree.
+
+2022-08-18 Patrick Monnerat <patrick@monnerat.net>
+
+ gdb: add Patrick Monnerat to gdb/MAINTAINERS
+
+2022-08-18 Jan Beulich <jbeulich@suse.com>
+
+ x86: move / quiesce pre-386 non-16-bit warning
+ Emitting this warning for every insn, including ones having actual
+ errors, is annoying. Introduce a boolean variable to emit the warning
+ just once on the first insn after .arch may have changed the things, and
+ move the warning to output_insn(). (I didn't want to go as far as
+ checking whether the .arch actually turned off the i386 bit, but doing
+ so would be an option.)
+
+ x86: insert "no error" enumerator in i386_error enumeration
+ The value of zero would better not indicate any error, but rather hit
+ the abort() at the top of the consuming switch().
+
+2022-08-18 GDB Administrator <gdbadmin@sourceware.org>
+
+ Automatic date update in version.in
+
+2022-08-17 Maciej W. Rozycki <macro@embecosm.com>
+
+ GDB/testsuite: Fix PARAM_ZUINTEGER reported for PARAM_ZUINTEGER_UNLIMITED
+ Correctly report PARAM_ZUINTEGER_UNLIMITED rather than PARAM_ZUINTEGER
+ in testing a Python parameter of the PARAM_ZUINTEGER_UNLIMITED type.
+
+2022-08-17 Alan Modra <amodra@gmail.com>
+
+ bfd_elf_set_group_contents assertion
+ objcopy of broken SHT_GROUP sections shouldn't write garbage.
+
+ * elf.c (bfd_elf_set_group_contents): If number of entries is
+ unexpected, fill out section with zeros.
+
+2022-08-17 Alan Modra <amodra@gmail.com>
+
+ timeout in mmo_get_symbols
+ Fix mmo_get_byte to return a fail-safe value, not just on the first
+ call with a read error but on subsequent calls too.
+
+ * mmo.c (mmo_get_byte): Return the fail-safe value on every
+ call after a read error.
+
+2022-08-17 Alan Modra <amodra@gmail.com>
+
+ mmo.c leak in mmo_make_section
+ * mmo.c (mmo_make_section): Alloc name using bfd_alloc. Use
+ bfd_error_no_memory.
+ (mmo_decide_section): Check for NULL return from mmo_make_section.
+
+2022-08-17 Alan Modra <amodra@gmail.com>
+
+ asan: heap buffer overflow in mmo_scan
+ mmo_get_loc needs to handle arbitrary vma and size chunks. Fuzzers
+ found that it wasn't working so well when the end of chunks were
+ getting close to address wrap-around.
+
+ * mmo.c (mmo_get_loc): Make "size" unsigned. Avoid arithmetic
+ overflow when calculating whether range hits an existing chunk.
+
+2022-08-17 Alan Modra <amodra@gmail.com>
+
+ elf.c tidy
+ Swap params of is_note, so they are section, segment like others used
+ in rewrite_elf_program_header. Whitespace fixes, plus wrapping of
+ overlong lines.
+
+2022-08-17 GDB Administrator <gdbadmin@sourceware.org>
+
+ Automatic date update in version.in
+
+2022-08-16 Torbjörn SVENSSON <torbjorn.svensson@foss.st.com>
+
+ bfd: Define ___lc_codepage_func prototype for older MinGW-w64
+ In commit 68e80d96a84282d547f3b3c1234c99009521630c, the usage of
+ ___lc_codepage_func was introduced to determine the current encoding.
+
+ Prior to version 9.0 of MinGW-w64, the function prototype for
+ ___lc_codepage_func was missing and trying to build BFD caused the
+ following error:
+
+ error: implicit declaration of function ‘___lc_codepage_func’
+
+ This changeset adds a conditonal definition of
+ ___lc_codepage_func to allow a sucessful build with MinGW-w64.
+
+2022-08-16 H.J. Lu <hjl.tools@gmail.com>
+
+ i386: Add MAX_OPERAND_BUFFER_SIZE
+ When displaying operands, invalid opcodes may overflow operand buffer
+ due to additional styling characters. Each style is encoded with 3
+ bytes. Define MAX_OPERAND_BUFFER_SIZE for operand buffer size and
+ increase it from 100 bytes to 128 bytes to accommodate 9 sets of styles
+ in an operand.
+
+ gas/
+
+ PR binutils/29483
+ * testsuite/gas/i386/i386.exp: Run pr29483.
+ * testsuite/gas/i386/pr29483.d: New file.
+ * testsuite/gas/i386/pr29483.s: Likewise.
+
+ opcodes/
+
+ PR binutils/29483
+ * i386-dis.c (MAX_OPERAND_BUFFER_SIZE): New.
+ (obuf): Replace 100 with MAX_OPERAND_BUFFER_SIZE.
+ (staging_area): Likewise.
+ (op_out): Likewise.
+
+2022-08-16 Andrew Burgess <aburgess@redhat.com>
+
+ gdb/riscv: fix gdb.arch/riscv-unwind-long-insn.exp on RV64
+ I noticed that the gdb.arch/riscv-unwind-long-insn.exp test was
+ failing when run on a 64-bit RISC-V target.
+
+ The problem was that GDB was failing to stop after a finish command,
+ and was then running to an unexpected location.
+
+ The reason GDB failed to stop at the finish breakpoint was that the
+ frame-id of the inferior, when we reached the finish breakpoint,
+ didn't match the expected frame-id that was stored on the breakpoint.
+
+ The reason for this mismatch was that the assembler code that is
+ included in this test, was written only taking 32-bit RISC-V into
+ account, as a result, the $fp register was being corrupted, and this
+ was causing the frame-id mismatch.
+
+ Specifically, the $fp register would end up being sign-extended from
+ 32 to 64 bits. If the expected $fp value has some significant bits
+ above bit 31 then the computed and expected frame-ids would not match.
+
+ To fix this I propose merging the two .s files into a single .S file,
+ and making use of preprocessor macros to specialise the file for the
+ correct size of $fp. There are plenty of existing tests that already
+ make use of preprocessor macros in assembler files, so I assume this
+ approach is fine.
+
+ Once I'd decided to make use of preprocessor macros to solve the 32/64
+ bit issue, then I figured I might as well merge the two test assembler
+ files, they only differed by a single instruction.
+
+ With this change in place I now see this test fully passing on 32 and
+ 64 bit RISC-V targets.
+
+2022-08-16 Simon Marchi <simon.marchi@polymtl.ca>
+
+ gdb/testsuite: fix breakpoint script output in gdb.mi/mi-break.exp
+ Commit 9db0d8536dbc ("gdb/mi: fix breakpoint script field output") fixed
+ the output of the script key in the MI breakpoint output, from
+
+ script={"print 10","continue"}
+
+ to
+
+ script=["print 10","continue"]
+
+ However, it missed updating this test case, which still tests for the
+ old (broken) form, causing:
+
+ FAIL: gdb.mi/mi-break.exp: mi-mode=main: test_breakpoint_commands: breakpoint commands: check that commands are set (unexpected output)
+ FAIL: gdb.mi/mi-break.exp: mi-mode=separate: test_breakpoint_commands: breakpoint commands: check that commands are set (unexpected output)
+
+ Update the test to expect the new form.
+
+ Change-Id: I174919d4eea53e96d914ca9bd1cf6f01c8de30b8
+
+2022-08-16 Tom Tromey <tromey@adacore.com>
+
+ Use strwinerror in gdb/windows-nat.c
+ When working on windows-nat.c, it's useful to see an error message in
+ addition to the error number given by GetLastError. This patch moves
+ strwinerror from gdbserver to gdbsupport, and then updates
+ windows-nat.c to use it. A couple of minor changes to strwinerror
+ (constify the return type and use the ARRAY_SIZE macro) are also
+ included.
+
+2022-08-16 Tom Tromey <tom@tromey.com>
+
+ Remove register_gdbarch_init
+ This removes the deprecated register_gdbarch_init in favor a default
+ argument to gdbarch_register. Regression tested on x86-64 Fedora 34.
+
+2022-08-16 Alan Modra <amodra@gmail.com>
+
+ PR29495, rewrite_elf_program_header looping
+ This patch, in order of significance:
+ 1) Replaces some macros with inline functions.
+ 2) Those inline functions catch and avoid arithmetic overflows when
+ comparing addresses.
+ 3) When assigning sections to segments (IS_SECTION_IN_INPUT_SEGMENT)
+ use bed->want_p_paddr_set_to_zero to decide whether lma vs p_paddr
+ or vma vs p_vaddr should be tested. When remapping, use the same
+ test, and use is_note rather than the more restrictive
+ IS_COREFILE_NOTE.
+
+ It's important that the later tests not be more restrictive. If they
+ are it can lead to the situation triggered by the testcases, where a
+ section seemingly didn't fit and thus needed a new mapping. It didn't
+ fit the new mapping either, and this repeated until memory exhausted.
+
+ PR 29495
+ * elf.c (SEGMENT_END, SECTION_SIZE, IS_CONTAINED_BY_VMA): Delete.
+ (IS_CONTAINED_BY_LMA, IS_NOTE, IS_COREFILE_NOTE): Delete.
+ (segment_size, segment_end, section_size): New inline function.
+ (is_contained_by, is_note): Likewise.
+ (rewrite_elf_program_header): Use new functions.
+
+2022-08-16 Jan Beulich <jbeulich@suse.com>
+
+ x86: shorten certain template names
+ Now that we can purge templates, let's use this to improve readability a
+ little by shortening a few of their names, making functionally similar
+ ones also have identical names in their multiple incarnations.
+
+2022-08-16 Jan Beulich <jbeulich@suse.com>
+
+ x86: template-ize certain vector conversion insns
+ Many of the vector conversion insns come with X/Y/Z suffixed forms, for
+ disambiguation purposes in AT&T syntax. All of these gorups follow
+ certain patterns. Introduce "xy" and "xyz" templates to reduce
+ redundancy.
+
+ To facilitate using a uniform name for both AVX and AVX512, further
+ introduce a means to purge a previously defined template: A standalone
+ <name> will be recognized to have this effect.
+
+ Note that in the course of the conversion VFPCLASSPH is properly split
+ to separate AT&T and Intel syntax forms, matching VFPCLASSP{S,D} and
+ yielding the intended "ambiguous operand size" diagnostic in Intel mode.
+
+2022-08-16 Jan Beulich <jbeulich@suse.com>
+
+ x86: template-ize vector packed byte/word integer insns
+ Many of the vector integer insns come in byte/word element pairs. Most
+ of these pairs follow certain encoding patterns. Introduce a "bw"
+ template to reduce redundancy.
+
+ Note that in the course of the conversion
+ - the AVX VPEXTRW template which is not being touched needs to remain
+ ahead of the new "combined" ones, as (a) this should be tried first
+ when matching insns against templates and (b) its Load attributes
+ requires it to be first,
+ - this add a benign/meaningless IgnoreSize attribute to the memory form
+ of PEXTRB; it didn't seem worth avoiding this.
+
+2022-08-16 Jan Beulich <jbeulich@suse.com>
+
+ x86: re-order AVX512 S/G templates
+ The AVX2 gather ones are nicely grouped - do the same for the various
+ AVX512 scatter/gather ones. On the moved lines also convert EVex=<n> to
+ EVex<N>.
+
+2022-08-16 Jan Beulich <jbeulich@suse.com>
+
+ x86: template-ize vector packed dword/qword integer insns
+ Many of the vector integer insns come in dword/qword element pairs. Most
+ of these pairs follow certain encoding patterns. Introduce a "dq"
+ template to reduce redundancy.
+
+ Note that in the course of the conversion
+ - a few otherwise untouched templates are moved, so they end up next to
+ their siblings),
+ - drop an unhelpful Cpu64 from the GPR form of VPBROADCASTQ, matching
+ what we already have for KMOVQ - the diagnostic is better this way for
+ insns with multiple forms (i.e. the same Cpu64 attributes on {,V}MOVQ,
+ {,V}PEXTRQ, and {,V}PINSRQ are useful to keep),
+ - this adds benign/meaningless IgnoreSize attributes to the GPR forms of
+ KMOVD and VPBROADCASTD; it didn't seem worth avoiding this.
+
+2022-08-16 Jan Beulich <jbeulich@suse.com>
+
+ x86: template-ize packed/scalar vector floating point insns
+ The vast majority of vector FP insns comes in single/double pairs. Many
+ pairs follow certain encoding patterns. Introduce an "sd" template to
+ reduce redundancy. Similarly, to further cover similarities between
+ AVX512F and AVX512-FP16, introduce an "sdh" template.
+
+ For element-size Disp8 shift generalize i386-gen's broadcast size
+ determination, allowing Disp8MemShift to be specified without an operand
+ in the affected templated templates. While doing the adjustment also
+ eliminate an unhelpful (lost information) diagnostic combined with a use
+ after free in what is now get_element_size().
+
+ Note that in the course of the conversion
+ - the AVX512F form of VMOVUPD has a stray (leftover) Load attribute
+ dropped,
+ - VMOVSH has a benign IgnoreSize added (the attribute is still strictly
+ necessary for VMOVSD, and necessary for VMOVSS as long as we permit
+ strange combinations like "-march=i286+avx"),
+ - VFPCLASSPH is properly split to separate AT&T and Intel syntax forms,
+ matching VFPCLASSP{S,D}.
+
+2022-08-16 Jan Beulich <jbeulich@suse.com>
+
+ revert "x86: Also pass -P to $(CPP) when processing i386-opc.tbl"
+ This reverts commit 384f368958f2a5bb083660e58e5f8a010e6ad429, which
+ broke i386-gen's emitting of diagnostics. As a replacement to address
+ the original issue of newer gcc no longer splicing lines when dropping
+ the line continuation backslashes, switch to using + as the line
+ continuation character, doing the line splicing in i386-gen.
+
+2022-08-16 GDB Administrator <gdbadmin@sourceware.org>
+
+ Automatic date update in version.in
+
+2022-08-15 Alan Modra <amodra@gmail.com>
+
+ PR29362, some binutils memory leaks
+ 2022-08-16 Alan Modra <amodra@gmail.com>
+ Cunlong Li <shenxiaogll@163.com>
+
+ PR 29362
+ * dwarf.c (free_debug_information): New function, extracted..
+ (free_debug_memory): ..from here.
+ (process_debug_info): Use it when before clearing out unit
+ debug_information. Clear all fields.
+ * objcopy.c (delete_symbol_htabs): New function.
+ (main): Call it via xatexit.
+ (copy_archive): Free "dir".
+ * objdump.c (free_debug_section): Free reloc_info.
+
+2022-08-15 Jiangshuai Li <jiangshuai_li@linux.alibaba.com>
+
+ gdb/csky add unwinder for sigtramp frame when kernel 4.x and later
+ When kernel veriosn >= V4.x, the characteristic values used to
+ determine whether it is a signal function call are:
+ movi r7, 139
+ trap 0
+
+ Registers are saved at (sp + CSKY_SIGINFO_OFFSET + CSKY_SIGINFO_SIZE
+ + CSKY_UCONTEXT_SIGCONTEXT + CSKY_SIGCONTEXT_PT_REGS_TLS). The order
+ is described in csky_linux_rt_sigreturn_init_pt_regs.
+
+2022-08-15 Alan Modra <amodra@gmail.com>
+
+ aarch64_pei_vec
+ I know this target is just a skeleton, but let's not write out relocs
+ with uninitialised garbage.
+
+ * coff-aarch64.c (SWAP_IN_RELOC_OFFSET): Define.
+ (SWAP_OUT_RELOC_OFFSET): Define.
+
+2022-08-15 GDB Administrator <gdbadmin@sourceware.org>
+
+ Automatic date update in version.in
+
+2022-08-14 Andrew Burgess <aburgess@redhat.com>
+
+ gdb/riscv: improve a comment about fcsr, fflags, and frm registers
+ There's a comment in riscv-tdep.c that explains some of the background
+ about how we check for the fcsr, fflags, and frm registers within a
+ riscv target description.
+
+ This comment (and the functionality it describes) relates to how QEMU
+ advertises these registers within its target description.
+
+ Unfortunately, QEMU includes these three registers in both the fpu and
+ crs target description features. To work around this GDB uses one of
+ the register declarations, and ignores the other, this means the GDB
+ user sees a single copy of each register, and things just work.
+
+ When I originally wrote the comment I thought it didn't matter which
+ copy of the register GDB selected, the fpu copy or the csr copy, so
+ long as we just used one of them. The comment reflected this belief.
+
+ Upon further investigation, it turns out I was wrong. GDB has to use
+ the csr copy of the register. If GDB tries to use the register from
+ the fpu feature then QEMU will return an error when GDB tries to read
+ or write the register.
+
+ Luckily, the code within GDB (currently) will always select the csr
+ copy of the register, so nothing is broken, but the comment is wrong.
+ This commit updates the comment to better describe what is actually
+ going on.
+
+ Of course, I should probably also send a patch to QEMU to fix up the
+ target description that is sent to GDB.
+
+2022-08-14 Andrew Burgess <aburgess@redhat.com>
+
+ gdb/nds32: update features/nds32.c
+ After this commit:
+
+ commit 7b7c365c5c663ffdfb2b3f696db35c23cdccd921
+ Date: Wed Sep 15 10:10:46 2021 +0200
+
+ [bfd] Ensure unique printable names for bfd archs
+
+ The printable name field of the default nds32 bfd_arch_info changed
+ from 'n1h' to 'n1'. As a consequence the generated feature file
+ within GDB should have been recreated. Recreate it now.
+
+2022-08-14 Tom Tromey <tom@tromey.com>
+
+ Move decode_location_spec to code_breakpoint
+ breakpoint::decode_location_spec just asserts if called. It turned
+ out to be relatively easy to remove this method from breakpoint and
+ instead move the base implementation to code_breakpoint.
+
+ Change location_spec_to_sals to a method
+ location_spec_to_sals is only ever called for code breakpoints, so
+ make it a protected method there.
+
+ Change breakpoint_re_set_default to a method
+ breakpoint_re_set_default is only ever called from breakpoint re_set
+ methods, so make it a protected method on code_breakpoint.
+
+2022-08-14 GDB Administrator <gdbadmin@sourceware.org>
+
+ Automatic date update in version.in
+
+2022-08-13 Alan Modra <amodra@gmail.com>
+
+ PR29482 - strip: heap-buffer-overflow
+ PR 29482
+ * coffcode.h (coff_set_section_contents): Sanity check _LIB.
+
+ asan: NULL dereference in spu_elf_object_p
+ * elf32-spu.c (spu_elf_object_p): Don't dereference NULL
+ shdr->bfd_section.
+
+ ubsan: undefined shift in sign_extend
+ * libhppa.h (sign_extend): Avoid undefined behaviour.
+
+ asan: NULL dereference in som_set_reloc_info
+ * som.c (som_set_reloc_info): Ignore non-existent previous
+ fixup references.
+
+ readelf: print 0x0 as 0, and remove trailing spaces
+ This changes readelf output a little, removing the 0x prefix on hex
+ output when the value is 0, except in cases where a fixed field
+ width is shown. %#010x is not a good replacement for 0x%08x.
+
+ Make dwarf_vma uint64_t
+ This replaces dwarf_vma, dwarf_size_type and dwarf_signed_vma with
+ uint64_t and int64_t everywhere. The patch also gets rid of
+ DWARF_VMA_FMT since we can't use that with uint64_t, and all of the
+ configure support for deciding the flavour of HOST_WIDEST_INT.
+ dwarf_vmatoa also disappears, replacing most uses with one of
+ PRIx64, PRId64 or PRIu64. Printing of size_t and ptrdiff_t values
+ now use %z and %t rather than by casting to unsigned long. Also,
+ most warning messages that used 0x%lx or similar now use %#lx and a
+ few that didn't print the 0x hex prefix now also use %#. The patch
+ doesn't change normal readelf output, except in odd cases where values
+ previously might have been truncated.
+
+ Don't use bfd_vma in readelf.c
+ This replaces bfd_vma with uint64_t in readelf, defines BFD64
+ unconditionally, removes tests of BFD64 and sizeof (bfd_vma), and
+ removes quite a few now unnecessary casts.
+
+ Don't use bfd_size_type in readelf.c and dwarf.c
+ Replacing bfd_size_type with dwarf_size_type or uint64_t is mostly
+ cosmetic. The point of the change is to avoid use of a BFD type
+ in readelf, where we'd like to keep as independent of BFD as
+ possible. Also, the patch is a step towards using standard types.
+
+ Replace elf_vma with uint64_t
+ This patch replaces all uses of elf_vma with uint64_t, removes
+ tests of sizeof (elf_vma), and does a little tidying of
+ byte_get_little_endian and byte_get_big_endian.
+
+2022-08-13 GDB Administrator <gdbadmin@sourceware.org>
+
+ Automatic date update in version.in
+
+2022-08-12 Tom de Vries <tdevries@suse.de>
+
+ [gdb/testsuite] Fix gdb.dwarf2/dw2-dir-file-name.exp
+ When running test-case gdb.dwarf2/dw2-dir-file-name.exp on x86_64-linux, we
+ have:
+ ...
+ (gdb) break compdir_missing__ldir_missing__file_basename^M
+ Breakpoint 2 at 0x4004c4: file tmp-dw2-dir-file-name.c, line 999.^M
+ (gdb) continue^M
+ Continuing.^M
+ ^M
+ Breakpoint 2, 0x00000000004004c4 in \
+ compdir_missing__ldir_missing__file_basename () \
+ at tmp-dw2-dir-file-name.c:999^M
+ (gdb) PASS: gdb.dwarf2/dw2-dir-file-name.exp: \
+ compdir_missing__ldir_missing__file_basename: continue to breakpoint: \
+ compdir_missing__ldir_missing__file_basename
+ ...
+
+ When trying to set a breakpoint on
+ compdir_missing__ldir_missing__file_basename, the architecture-specific
+ prologue skipper starts at 0x4004c0 and skips past two insns, to 0x4004c4:
+ ...
+ 00000000004004c0 <compdir_missing__ldir_missing__file_basename>:
+ 4004c0: 55 push %rbp
+ 4004c1: 48 89 e5 mov %rsp,%rbp
+ 4004c4: 8b 05 72 1b 20 00 mov 0x201b72(%rip),%eax # 60203c <v>
+ 4004ca: 83 c0 01 add $0x1,%eax
+ 4004cd: 89 05 69 1b 20 00 mov %eax,0x201b69(%rip) # 60203c <v>
+ 4004d3: 90 nop
+ 4004d4: 5d pop %rbp
+ 4004d5: c3 ret
+ ...
+
+ And because the line table info is rudamentary:
+ ...
+ CU: tmp-dw2-dir-file-name.c:
+ File name Line number Starting address View Stmt
+ tmp-dw2-dir-file-name.c 999 0x4004c0 x
+ tmp-dw2-dir-file-name.c 1000 0x4004d6 x
+ tmp-dw2-dir-file-name.c - 0x4004d6
+ ...
+ the address does not fall at an actual line, so the breakpoint is shown with
+ address, both when setting it and hitting it.
+
+ when running the test-case with aarch64-linux, we have similarly:
+ ...
+ (gdb) break compdir_missing__ldir_missing__file_basename^M
+ Breakpoint 2 at 0x400618: file tmp-dw2-dir-file-name.c, line 999.^M
+ ...
+ due to the architecture-specific prologue skipper starting at 0x400610 and
+ skipping past two insns, to 0x400618:
+ ...
+ 0000000000400610 <compdir_missing__ldir_missing__file_basename>:
+ 400610: 90000100 adrp x0, 420000 <__libc_start_main@GLIBC_2.17>
+ 400614: 9100b000 add x0, x0, #0x2c
+ 400618: b9400000 ldr w0, [x0]
+ 40061c: 11000401 add w1, w0, #0x1
+ 400620: 90000100 adrp x0, 420000 <__libc_start_main@GLIBC_2.17>
+ 400624: 9100b000 add x0, x0, #0x2c
+ 400628: b9000001 str w1, [x0]
+ 40062c: d503201f nop
+ 400630: d65f03c0 ret
+ ...
+
+ But interestingly, the aarch64 architecture-specific prologue skipper is
+ wrong. There is no prologue, and the breakpoint should be set at 0x400610.
+
+ By using "break *compdir_missing__ldir_missing__file_basename"
+ we can get the breakpoint set at 0x400610:
+ ...
+ (gdb) break *compdir_missing__ldir_missing__file_basename^M
+ Breakpoint 2 at 0x400610: file tmp-dw2-dir-file-name.c, line 999.^M
+ ...
+ and make the test-case independent of prologue analysis.
+
+ This requires us to update the expected patterns.
+
+ The fix ensures that once the aarch64 architecture-specific prologue skipper
+ will be fixed, this test-case won't start failing.
+
+ Tested on x86_64-linux.
+
+2022-08-12 GDB Administrator <gdbadmin@sourceware.org>
+
+ Automatic date update in version.in
+
+2022-08-11 Lancelot SIX <lancelot.six@amd.com>
+
+ gdb/varobj: Only re-evaluate invalid globals during re_set
+ When doing varobj_re_set, we currently try to recreate floating varobj.
+ This was introduced by 4e969b4f0128 "Re-evaluate floating varobj as part
+ of varobj_invalidate" to deal with use a after free issue. However
+ since bc20e562ec0 "Fix use after free in varobj" we now ensure that we
+ never have dangling pointers so this all recreation is not strictly
+ needed anymore for floating varobjs.
+
+ This commit proposes to remove this recreation process for floating
+ varobjs.
+
+ Tested on x86_64-linux.
+
+2022-08-11 Tom de Vries <tdevries@suse.de>
+ Lancelot SIX <lancelot.six@amd.com>
+
+ gdb/varobj: Reset varobj after relocations have been computed
+ [This patch is a followup to the discussion in
+ https://sourceware.org/pipermail/gdb-patches/2022-August/191188.html]
+
+ PR/29426 shows failures when running the gdb.mi/mi-var-invalidate-shlib
+ test when using a compiler which does not produce a PIE executable by
+ default.
+
+ In the testcase, a varobj is created to track a global variable, and
+ then the main binary is reloaded in GDB (using the file command).
+
+ During the load of the new binary, GDB tries to recreate the varobj to
+ track the global in the new binary (varobj_invalidate_iter). At this
+ point, the old process is still in flight. So when we try to access to
+ the value of the global, in a PIE executable we only have access to the
+ unrelocated address (the objfile's text_section_offset () is 0). As a
+ consequence down the line read_value_memory fails to read the unrelated
+ address, so cannot evaluate the value of the global. Note that the
+ expression used to access to the global’s value is valid, so the varobj
+ can be created. When using a non PIE executable, the address of the
+ global GDB knows about at this point does not need relocation, so
+ read_value_memory can access the (old binary’s) value.
+
+ So at this point, in the case of a non-PIE executable the value field is
+ set, while it is cleared in the case of PIE executable. Later when the
+ test issues a "-var-update global_var", the command sees no change in
+ the case of the non-PIE executable, while in the case of the PIE
+ executable install_new_value sees that value changes, leading to a
+ different output.
+
+ This patch makes sure that, as we do for breakpoints, we wait until
+ relocation has happened before we try to recreate varobjs. This way we
+ have a consistent behavior between PIE and non-PIE binaries.
+
+ Tested on x86_64-linux.
+
+ Bug: https://sourceware.org/bugzilla/show_bug.cgi?id=29426
+
+2022-08-11 Lancelot SIX <lancelot.six@amd.com>
+
+ gdb/varobj: Do not invalidate locals in varobj_invalidate_iter
+ The varobj_invalidate_iter function has logic to invalidate any local
+ varobj it can find. However since bc20e562ec0 "gdb/varobj: Fix use
+ after free in varobj" all varobj containing references to an objfile are
+ cleared when the objfile goes out of scope. This means that at this
+ point any local varobj seen by varobj_invalidate_iter either has
+ already been invalidated by varobj_invalidate_if_uses_objfile or only
+ contains valid references and there is no reason to invalidate it.
+
+ This patch proposes to remove this unnecessary invalidation and adds a
+ testcase which exercises a scenario where a local varobj can legitimately
+ survive a call to varobj_invalidate_iter.
+
+ At this point the varobj_invalidate and varobj_invalidate_iter seem
+ misnamed since they deal with re-creating invalid objects and do not do
+ invalidation, but this will be fixed in a following patch.
+
+ Tested on x86_64-linux.
+
+2022-08-11 Dmitry Selyutin <ghostmansd@gmail.com>
+
+ ppc/svp64: support svindex instruction
+ https://libre-soc.org/openpower/sv/
+ https://libre-soc.org/openpower/sv/remap/#svindex
+ https://libre-soc.org/openpower/isa/simplev/
+
+ ppc/svp64: support svremap instruction
+ https://libre-soc.org/openpower/sv/
+ https://libre-soc.org/openpower/sv/remap/#svremap
+ https://libre-soc.org/openpower/isa/simplev/
+
+ ppc/svp64: support svshape instruction
+ https://libre-soc.org/openpower/sv/
+ https://libre-soc.org/openpower/sv/remap/#svshape
+ https://libre-soc.org/openpower/isa/simplev/
+
+ ppc/svp64: support svstep instructions
+ https://libre-soc.org/openpower/sv/
+ https://libre-soc.org/openpower/sv/svstep/
+ https://libre-soc.org/openpower/isa/simplev/
+
+ ppc/svp64: support setvl instructions
+ https://libre-soc.org/openpower/sv/
+ https://libre-soc.org/openpower/sv/setvl/
+ https://libre-soc.org/openpower/isa/simplev/
+
+ ppc/svp64: introduce non-zero operand flag
+ svstep and svshape instructions subtract 1 before encoding some of the
+ operands. Obviously zero is not supported for these operands. Whilst
+ PPC_OPERAND_PLUS1 fits perfectly to mark that maximal value should be
+ incremented, there is no flag which marks the fact that zero values are
+ not allowed. This patch adds a new flag, PPC_OPERAND_NONZERO, for this
+ purpose.
+
+2022-08-11 Dmitry Selyutin <ghostmansd@gmail.com>
+
+ ppc/svp64: support LibreSOC architecture
+ This patch adds support for LibreSOC machine and SVP64 extension flag
+ for PowerPC architecture. SV (Simple-V) is a strict RISC-paradigm
+ Scalable Vector Extension for the Power ISA. SVP64 is the 64-bit
+ Prefixed instruction format implementing SV. Funded by NLnet through EU
+ Grants No: 825310 and 825322, SV is in DRAFT form and is to be publicly
+ submitted via the OpenPOWER Foundation ISA Working Group via the
+ newly-created External RFC Process.
+
+ For more details, visit https://libre-soc.org.
+
+2022-08-11 Torbjörn SVENSSON <torbjorn.svensson@foss.st.com>
+
+ [Arm] Cleanup arm_m_exception_cache
+ With this change, only valid contents of LR are accepted when unwinding
+ exception frames for m-profile targets.
+
+ If the contents of LR are anything but EXC_RETURN or FNC_RETURN, it
+ will cause GDB to print an error and/or abort unwinding of the frame as
+ it's an invalid state for the unwinder.
+
+ The FNC_RETURN pattern requires Security Extensions to be enabled.
+
+2022-08-11 Fangrui Song <maskray@google.com>
+
+ RISC-V: Remove R_RISCV_GNU_VTINHERIT/R_RISCV_GNU_VTENTRY
+ They were legacy relocation types copied from other ports. The related
+ -fvtable-gc was removed from GCC in 2003.
+
+ The associated assembler directives (.vtable_inherit and .vtable_entry)
+ have never been supported by the RISC-V port. Remove related ld code.
+
+ Link: https://github.com/riscv-non-isa/riscv-elf-psabi-doc/pull/323
+
+2022-08-11 Alan Modra <amodra@gmail.com>
+
+ PR29466, APP/NO_APP with .linefile
+ Commit 53f2b36a54b9 exposed a bug in sb_scrub_and_add_sb that could
+ result in losing input. If scrubbing results in expansion past the
+ holding capacity of do_scrub_chars output buffer, then do_scrub_chars
+ stashes the extra input for the next call. That call never came
+ because sb_scrub_and_add_sb wrongly decided it was done. Fix that by
+ allowing sb_scrub_and_add_sb to see whether there is pending input.
+ Also allow a little extra space so that in most cases we won't need
+ to resize the output buffer.
+
+ sb_scrub_and_add_sb also limited output to the size of the input,
+ rather than the actual output buffer size. Fixing that resulted in a
+ fail of gas/testsuite/macros/dot with an extra warning: "end of file
+ not at end of a line; newline inserted". OK, so the macro in dot.s
+ really does finish without end-of-line. Apparently the macro
+ expansion code relied on do_scrub_chars returning early. So fix that
+ too by adding a newline if needed in macro_expand_body.
+
+ PR 29466
+ * app.c (do_scrub_pending): New function.
+ * as.h: Declare it.
+ * input-scrub.c (input_scrub_include_sb): Add extra space for
+ two .linefile directives.
+ * sb.c (sb_scrub_and_add_sb): Take into account pending input.
+ Allow output to max.
+ * macro.c (macro_expand_body): Add terminating newline.
+ * testsuite/config/default.exp (SIZE, SIZEFLAGS): Define.
+ * testsuite/gas/macros/app5.d,
+ * testsuite/gas/macros/app5.s: New test.
+ * testsuite/gas/macros/macros.exp: Run it.
+
+2022-08-11 Alan Modra <amodra@gmail.com>
+
+ regen potfiles
+
+2022-08-11 GDB Administrator <gdbadmin@sourceware.org>
+
+ Automatic date update in version.in
+
+2022-08-10 Simon Marchi <simon.marchi@polymtl.ca>
+
+ gdb/mi: fix breakpoint script field output
+ The "script" field, output whenever information about a breakpoint with
+ commands is output, uses wrong MI syntax.
+
+ $ ./gdb -nx -q --data-directory=data-directory -x script -i mi
+ =thread-group-added,id="i1"
+ =breakpoint-created,bkpt={number="1",type="breakpoint",disp="keep",enabled="y",addr="0x000000000000111d",func="main",file="test.c",fullname="/home/simark/build/binutils-gdb-one-target/gdb/test.c",line="3",thread-groups=["i1"],times="0",original-location="main"}
+ =breakpoint-modified,bkpt={number="1",type="breakpoint",disp="keep",enabled="y",addr="0x000000000000111d",func="main",file="test.c",fullname="/home/simark/build/binutils-gdb-one-target/gdb/test.c",line="3",thread-groups=["i1"],times="0",script={"aaa","bbb","ccc"},original-location="main"}
+ (gdb)
+ -break-info
+ ^done,BreakpointTable={nr_rows="1",nr_cols="6",hdr=[{width="7",alignment="-1",col_name="number",colhdr="Num"},{width="14",alignment="-1",col_name="type",colhdr="Type"},{width="4",alignment="-1",col_name="disp",colhdr="Disp"},{width="3",alignment="-1",col_name="enabled",colhdr="Enb"},{width="18",alignment="-1",col_name="addr",colhdr="Address"},{width="40",alignment="2",col_name="what",colhdr="What"}],body=[bkpt={number="1",type="breakpoint",disp="keep",enabled="y",addr="0x000000000000111d",func="main",file="test.c",fullname="/home/simark/build/binutils-gdb-one-target/gdb/test.c",line="3",thread-groups=["i1"],times="0",script={"aaa","bbb","ccc"},original-location="main"}]}
+ (gdb)
+
+ In both the =breakpoint-modified and -break-info output, we have:
+
+ script={"aaa","bbb","ccc"}
+
+ According to the output syntax [1], curly braces means tuple, and a
+ tuple contains key=value pairs. This looks like it should be a list,
+ but uses curly braces by mistake. This would make more sense:
+
+ script=["aaa","bbb","ccc"]
+
+ Fix it, keeping the backwards compatibility by introducing a new MI
+ version (MI4), in exactly the same way as was done when fixing
+ multi-locations breakpoint output in [2].
+
+ - Add a fix_breakpoint_script_output uiout flag. MI uiouts will use
+ this flag if the version is >= 4.
+ - Add a fix_breakpoint_script_output_globally variable and the
+ -fix-breakpoint-script-output MI command to set it, if frontends want
+ to use the fixed output for this without using the newer MI version.
+ - When emitting the script field, use list instead of tuple, if we want
+ the fixed output (depending on the two criteria above)
+ -
+
+ [1] https://sourceware.org/gdb/onlinedocs/gdb/GDB_002fMI-Output-Syntax.html#GDB_002fMI-Output-Syntax
+ [2] https://gitlab.com/gnutools/binutils-gdb/-/commit/b4be1b0648608a2578bbed39841c8ee411773edd
+
+ Change-Id: I7113c6892832c8d6805badb06ce42496677e2242
+ Bug: https://sourceware.org/bugzilla/show_bug.cgi?id=24285
+
+2022-08-10 Andrew Burgess <aburgess@redhat.com>
+
+ objdump: fix extended (256) disassembler colors
+ After commit:
+
+ commit a88c79b77036e4778e70d62081c3cfd1044bb8e3
+ Date: Tue Aug 9 14:57:48 2022 +0100
+
+ Default to enabling colored disassembly if output is to a terminal.
+
+ The 256 extended-color support for --disassembler-color was broken.
+ This is fixed in this commit.
+
+ PR 29457
+ * objdump (objdump_styled_sprintf): Check disassembler_color
+ against an enum value, don't treat it as a bool.
+
+2022-08-10 mga-sc <mark.goncharov@syntacore.com>
+
+ gdb/riscv: implement cannot_store_register gdbarch method
+ The x0 (zero) register is read-only on RISC-V. Implement the
+ cannot_store_register gdbarch method to tell GDB this.
+
+ Without this method GDB will try to write to x0, and relies on the
+ target to ignore such writes. If you are using a target that
+ complains (or throws an error) when writing to x0, this change will
+ prevent this from happening.
+
+ The gdb.arch/riscv-reg-aliases.exp test exercises writing to x0, and
+ will show the errors when using a suitable target.
+
+2022-08-10 Luis Machado <luis.machado@arm.com>
+
+ Disable year 2038 support on 32-bit hosts by default
+ With a recent import of gnulib, code has been pulled that tests and enables
+ 64-bit time_t by default on 32-bit hosts that support it.
+
+ Although gdb can use the gnulib support, bfd doesn't use gnulib and currently
+ doesn't do these checks.
+
+ As a consequence, if we have a 32-bit host that supports 64-bit time_t, we'll
+ have a mismatch between gdb's notion of time_t and bfd's notion of time_t.
+
+ This will lead to mismatches in the struct stat size, leading to memory
+ corruption and crashes.
+
+ This patch disables the year 2038 check for now, which makes things work
+ reliably again.
+
+ I'd consider this a temporary fix until we have proper bfd checks for the year
+ 2038, if it makes sense. 64-bit hosts seems to be more common these days, so
+ I'm not sure how important it is to have this support enabled and how soon
+ we want to enable it.
+
+ Thoughts?
+
+2022-08-10 Jan Beulich <jbeulich@suse.com>
+
+ gas/Dwarf: properly skip zero-size functions
+ PR gas/29451
+
+ While out_debug_abbrev() properly skips such functions, out_debug_info()
+ mistakenly didn't. It needs to calculate the high_pc expression ahead of
+ time, in order to skip emitting any data for the function if the value
+ is zero.
+
+ The one case which would still leave a zero-size entry is when
+ symbol_get_obj(symp)->size ends up evaluating to zero. I hope we can
+ expect that to not be the case, otherwise we'd need to have a way to
+ post-process .debug_info contents between resolving expressions and
+ actually writing the data out to the file. Even then it wouldn't be
+ entirely obvious in which way to alter the data.
+
+2022-08-10 Alan Modra <amodra@gmail.com>
+
+ PR29462, internal error in relocate, at powerpc.cc:10796
+ Prior to the inline plt call support (commit 08be322439), the only
+ local syms with plt entries were local ifunc symbols. There shouldn't
+ be stubs for other local symbols so don't look for them. The patch
+ also fixes minor bugs in get_reference_flags; Many relocs are valid
+ only for ppc64 and a couple only for ppc32.
+
+ PR 29462
+ * powerpc.cc (Target_powerpc::Relocate::relocate): Rename
+ use_plt_offset to pltcal_to_direct, invert logic. For relocs
+ not used with inline plt sequences against local symbols, only
+ look for stubs when the symbol is an ifunc.
+ (Target_powerpc::Scan::get_reference_flags): Correct reloc
+ handling for relocs not valid for both 32-bit and 64-bit.
+
+2022-08-10 Youling Tang <tangyouling@loongson.cn>
+
+ bfd: Add support for LoongArch64 EFI (efi-*-loongarch64).
+ This adds support for efi-loongarch64 by virtue of adding a new PEI target
+ pei-loongarch64. This is not a full target and only exists to support EFI at
+ this time.
+
+ This means that this target does not support relocation processing and is mostly
+ a container format. This format has been added to elf based loongarch64 targets
+ such that efi images can be made natively on Linux.
+
+ However this target is not valid for use with gas but only with objcopy.
+
+ We should't limit addresses to 32-bits for 64-bit vma, otherwise there will be
+ "RVA truncated" error when using objcopy on loongarch64.
+
+ With these changes the resulting file is recognized as an efi image.
+
+ Any magic number is based on the Microsoft PE specification [1].
+
+ The test results are as follows:
+ $ make check-binutils RUNTESTFLAGS='loongarch64.exp'
+ PASS: Check if efi app format is recognized
+
+ $ objdump -h -f tmpdir/loongarch64copy.o
+ tmpdir/loongarch64copy.o: file format pei-loongarch64
+ architecture: Loongarch64, flags 0x00000132:
+ EXEC_P, HAS_SYMS, HAS_LOCALS, D_PAGED
+ start address 0x0000000000000000
+
+ Sections:
+ Idx Name Size VMA LMA File off Algn
+ 0 .text 0000003c 00000000200000b0 00000000200000b0 00000200 2**2
+ CONTENTS, ALLOC, LOAD, READONLY, CODE
+
+ [1] https://docs.microsoft.com/en-us/windows/win32/debug/pe-format
+
+ bfd:
+ * .gitignore (pe-loongarch64igen.c): New.
+ * Makefile.am (pei-loongarch64.lo, pe-loongarch64igen.lo, pei-loongarch64.c,
+ pe-loongarch64igen.c): Add support.
+ * Makefile.in: Likewise.
+ * bfd.c (bfd_get_sign_extend_vma): Add pei-loongarch64.
+ * coff-loongarch64.c: New file.
+ * coffcode.h (coff_set_arch_mach_hook, coff_set_flags,
+ coff_write_object_contents) Add loongarch64 (loongarch64_pei_vec) support.
+ * config.bfd: Likewise.
+ * configure: Likewise.
+ * configure.ac: Likewise.
+ * libpei.h (GET_OPTHDR_IMAGE_BASE, PUT_OPTHDR_IMAGE_BASE,
+ GET_OPTHDR_SIZE_OF_STACK_RESERVE, PUT_OPTHDR_SIZE_OF_STACK_RESERVE,
+ GET_OPTHDR_SIZE_OF_STACK_COMMIT, PUT_OPTHDR_SIZE_OF_STACK_COMMIT,
+ GET_OPTHDR_SIZE_OF_HEAP_RESERVE, PUT_OPTHDR_SIZE_OF_HEAP_RESERVE,
+ GET_OPTHDR_SIZE_OF_HEAP_COMMIT, PUT_OPTHDR_SIZE_OF_HEAP_COMMIT,
+ GET_PDATA_ENTRY, _bfd_peLoongArch64_bfd_copy_private_bfd_data_common,
+ _bfd_peLoongArch64_bfd_copy_private_section_data,
+ _bfd_peLoongArch64_get_symbol_info, _bfd_peLoongArch64_only_swap_filehdr_out,
+ _bfd_peLoongArch64_print_private_bfd_data_common,
+ _bfd_peLoongArch64i_final_link_postscript,
+ _bfd_peLoongArch64i_only_swap_filehdr_out, _bfd_peLoongArch64i_swap_aouthdr_in,
+ _bfd_peLoongArch64i_swap_aouthdr_out, _bfd_peLoongArch64i_swap_aux_in,
+ _bfd_peLoongArch64i_swap_aux_out, _bfd_peLoongArch64i_swap_lineno_in,
+ _bfd_peLoongArch64i_swap_lineno_out, _bfd_peLoongArch64i_swap_scnhdr_out,
+ _bfd_peLoongArch64i_swap_sym_in, _bfd_peLoongArch64i_swap_sym_out,
+ _bfd_peLoongArch64i_swap_debugdir_in, _bfd_peLoongArch64i_swap_debugdir_out,
+ _bfd_peLoongArch64i_write_codeview_record,
+ _bfd_peLoongArch64i_slurp_codeview_record,
+ _bfd_peLoongArch64_print_ce_compressed_pdata): New.
+ * peXXigen.c (_bfd_XXi_swap_aouthdr_in, _bfd_XXi_swap_aouthdr_out,
+ _bfd_XXi_swap_scnhdr_out, pe_print_pdata, _bfd_XX_print_private_bfd_data_common,
+ _bfd_XX_bfd_copy_private_section_data, _bfd_XXi_final_link_postscript):
+ Support COFF_WITH_peLoongArch64,
+ * pei-loongarch64.c: New file.
+ * peicode.h (coff_swap_scnhdr_in, pe_ILF_build_a_bfd, pe_ILF_object_p):
+ Support COFF_WITH_peLoongArch64.
+ (jtab): Add dummy entry that traps.
+ * targets.c (loongarch64_pei_vec): New.
+
+ binutils
+ * testsuite/binutils-all/loongarch64/loongarch64.exp: New file.
+ * testsuite/binutils-all/loongarch64/pei-loongarch64.d: New test.
+ * testsuite/binutils-all/loongarch64/pei-loongarch64.s: New test.
+
+ include
+ * coff/loongarch64.h: New file.
+ * coff/pe.h (IMAGE_FILE_MACHINE_LOONGARCH64): New.
+
+2022-08-10 GDB Administrator <gdbadmin@sourceware.org>
+
+ Automatic date update in version.in
+
+2022-08-09 Andrew Burgess <aburgess@redhat.com>
+
+ gdb/riscv/testsuite: fix failures in gdb.arch/riscv-reg-aliases.exp
+ When running on a native RISC-V Linux target I currently see failures
+ in the gdb.arch/riscv-reg-aliases.exp test like this:
+
+ set $ft0.float = 501
+ (gdb) PASS: gdb.arch/riscv-reg-aliases.exp: write non-zero value to ft0
+ p/d $ft0.float
+ $263 = 1140490240
+ (gdb) FAIL: gdb.arch/riscv-reg-aliases.exp: read ft0 after non-zero write to ft0
+
+ This test started failing after this commit:
+
+ commit 56262a931b7ca8ee3ec9104bc7e9e0b40cf3d64e
+ Date: Thu Feb 17 13:43:59 2022 -0700
+
+ Change how "print/x" displays floating-point value
+
+ The problem is that when 501 is written to $ft0.float the value is
+ converted to floating point format and stored in the register. Prior
+ to the above commit printing with /x and /d would first extract the
+ value as a float, and then convert the value to an integer for
+ display. After the above commit GDB now uses the raw register value
+ when displaying /x and /d, and so we see this behaviour:
+
+ (gdb) info registers $ft0
+ ft0 {float = 501, double = 5.6347704700123827e-315} (raw 0x0000000043fa8000)
+ (gdb) p/f $ft0.float
+ $1 = 501
+ (gdb) p/d $ft0.float
+ $2 = 1140490240
+ (gdb) p/x $ft0.float
+ $3 = 0x43fa8000
+
+ To fix this test I now print the float registers using the /f format
+ rather than /d. With this change the test now passes.
+
+2022-08-09 Stepan Nemec <stepnem@gmail.com>
+
+ Another gas manual typo correction.
+
+ Fix typos in assembler documentation.
+
+2022-08-09 Feiyang Chen <chenfeiyang@loongson.cn>
+
+ gdb/gdbserver: LoongArch: Improve implementation of fcc registers
+ The current implementation of the fcc register is referenced to the
+ user_fp_state structure of the kernel uapi [1].
+
+ struct user_fp_state {
+ uint64_t fpr[32];
+ uint64_t fcc;
+ uint32_t fcsr;
+ };
+
+ But it is mistakenly defined as a 64-bit fputype register, resulting
+ in a confusing output of "info register".
+
+ (gdb) info register
+ ...
+ fcc {f = 0x0, d = 0x0} {f = 0, d = 0}
+ ...
+
+ According to "Condition Flag Register" in "LoongArch Reference Manual"
+ [2], there are 8 condition flag registers of size 1. Use 8 registers of
+ uint8 to make it easier for users to view the fcc register groups.
+
+ (gdb) info register
+ ...
+ fcc0 0x1 1
+ fcc1 0x0 0
+ fcc2 0x0 0
+ fcc3 0x0 0
+ fcc4 0x0 0
+ fcc5 0x0 0
+ fcc6 0x0 0
+ fcc7 0x0 0
+ ...
+
+ [1] https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/tree/arch/loongarch/include/uapi/asm/ptrace.h
+ [2] https://loongson.github.io/LoongArch-Documentation/LoongArch-Vol1-EN.html#_condition_flag_register
+
+2022-08-09 Nick Clifton <nickc@redhat.com>
+
+ Default to enabling colored disassembly if output is to a terminal.
+ PR 29457
+ * objdump.c (disassembler_color): Change type to an enum.
+ (disassembler_extended_color): Remove.
+ (usage): Update.
+ (objdump_color_for_assembler_style): Update.
+ (main): Update initialisation of disassembler_color. If not
+ initialised via a command line option, set based upon terminal
+ output.
+ * doc/binutils.texi: Update description of disassmbler-color
+ option.
+ * testsuite/binutils-all/arc/objdump.exp: Add
+ --disassembler-color=off option when disassembling.
+ * testsuite/binutils-all/arm/objdump.exp: Likewise.
+
+2022-08-09 Aditya Vidyadhar Kamath <Aditya.Kamath1@ibm.com>
+
+ Fix-for-multiple-thread-detection-in-AIX.
+ In AIX multiple threads were not added. This patch is a fix for the same
+
+ When we create a pthread debug session we have callbacks to read
+ symbols and memory. One of those call backs is pdc_read_data.
+
+ Before we come into aix-thread wait() we switch to no thread and
+ therefore the current thread is null.
+
+ When we get into pdc_read_data we have a dependency that we need to
+ be in the correct current thread that has caused an event of new
+ thread, inorder to read memory.
+
+ Hence we switch to the correct thread.
+
+ This is done by passing the pid in the pthdb_user_t user_current_pid
+ parameter in every call back.
+
+2022-08-09 Tom de Vries <tdevries@suse.de>
+
+ [gdb/testsuite] Fix gdb.dwarf2/debug-names.exp
+ When running test-case gdb.dwarf2/debug-names.exp on openSUSE Tumbleweed, I
+ run into:
+ ...
+ (gdb) maint info symtabs^M
+ ...
+ ERROR: internal buffer is full.
+ UNRESOLVED: gdb.dwarf2/debug-names.exp: break _start expanded symtab
+ ...
+
+ Fix this by simplifying the test-case to print _start rather running to it.
+
+ Tested on x86_64-linux.
+
+2022-08-09 Andrew Burgess <aburgess@redhat.com>
+
+ gdb/riscv: use register name enum values in riscv-linux-nat.c
+ There were a few places where we were using integer values rather than
+ the RISCV_*_REGNUM constants defined in riscv-tdep.h. This commit
+ replaces 0 with RISCV_ZERO_REGNUM and 32 with RISCV_PC_REGNUM in a few
+ places.
+
+ There should be no user visible changes after this commit.
+
+2022-08-09 Jan Beulich <jbeulich@suse.com>
+
+ x86-64: adjust MOVQ to/from SReg attributes
+ It is unclear to me why the corresponding MOV (no Q suffix) can be
+ issued without REX.W, but MOVQ has to have that prefix (bit). Add
+ NoRex64 and in exchange drop Size64.
+
+ x86: adjust MOVSD attributes
+ The non-SSE2AVX form of the SIMD variant of the instruction needlessly
+ has the (still multi-purpose) IgnoreSize attribute. All other similar
+ SSE2 insns use NoRex64 instead. Make this consistent, noting that the
+ SSE2AVX form can't have the same change made - there the memory operand
+ doesn't at the same time permit RegXMM (which logic uses when deciding
+ whether a Q suffix is okay outside of 64-bit mode).
+
+ x86: fold AVX VGATHERDPD / VPGATHERDQ
+ While the other three variants each differ in attributes and hence can't
+ be folded, these two pairs actually can be (and were previously
+ overlooked). This effectively matches their AVX512VL counterparts, which
+ are also expressed as a single template.
+
+ x86: allow use of broadcast with X/Y/Z-suffixed AVX512-FP16 insns
+ While the x/y/z suffix isn't necessary to use in this case, it is still
+ odd that these forms don't support broadcast (unlike their AVX512F /
+ AVX512DQ counterparts). The lack thereof can e.g. make macro-ized
+ programming more difficult.
+
+ x86/Intel: split certain AVX512-FP16 VCVT*2PH templates
+ One more place where pre-existing templates should have been taken as a
+ basis: In Intel syntax we want to consistently issue an "ambiguous
+ operand size" error when a size-less memory operand is specified for an
+ insn where register use alone isn't sufficient for disambiguation.
+
+2022-08-09 Jiangshuai Li <jiangshuai_li@linux.alibaba.com>
+
+ gdb/csky fix build error in ubuntu20_04
+ build error in: https://builder.sourceware.org/buildbot/#/builders/170/builds/246
+ ...
+ ../../binutils-gdb/gdb/csky-linux-tdep.c: In function ‘void
+ csky_supply_fregset(const regset*, regcache*, int, const void*, size_t)’:
+ ../../binutils-gdb/gdb/csky-linux-tdep.c:194:18: error: format ‘%ld’
+ expects argument of type ‘long int’, but argument 2 has type ‘size_t’
+ {aka ‘unsigned int’} [-Werror=format=]
+ 194 | warning (_("Unknow size %ld of section .reg2, can not get
+ value"
+ |
+ ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+ 195 | " of float registers."), len);
+ ...
+
+ Fix it via using %s vs pulongest suggested by Tom.
+
+2022-08-09 GDB Administrator <gdbadmin@sourceware.org>
+
+ Automatic date update in version.in
+
+2022-08-08 Tom Tromey <tromey@adacore.com>
+
+ Fix regression from gdbarch registry change
+ The gdbarch registry patch introduced a regression that could cause a
+ crash when opening files in gdb. The bug is that, previously, the
+ solib ops would default to current_target_so_ops; but the patch
+ changed this code to default to nullptr. This patch fixes the bug by
+ reintroducing the earlier behavior. This is PR gdb/29449.
+
+ I managed to reproduce the bug with a riscv-elf build and then
+ verified that this fixes the problem.
+
+ Bug: https://sourceware.org/bugzilla/show_bug.cgi?id=29449
+
+2022-08-08 Martin Liska <mliska@suse.cz>
+
+ add splay tree for info_ptr -> CU mapping
+ While using perf top for MozillaThunderbird I noticed quite some slow
+ dissably call with source code involved. E.g.
+
+ time ./objdump --start-address=0x0000000004e0dcd0 --stop-address=0x0000000004e0df8b -l -d --no-show-raw-insn -S -C /usr/lib64/thunderbird/libxul.so
+
+ took 2.071s and I noticed quite some time is spent in
+ find_abstract_instance:
+
+ 33.46% objdump objdump [.] find_abstract_instance
+ 18.22% objdump objdump [.] arange_add
+ 13.77% objdump objdump [.] read_attribute_value
+ 4.82% objdump objdump [.] comp_unit_maybe_decode_line_info
+ 3.10% objdump libc.so.6 [.] __memset_avx2_unaligned_erms
+
+ where linked list of CU is iterated when searing for where info_ptr
+ belongs to:
+
+ : 3452 for (u = unit->prev_unit; u != NULL; u = u->prev_unit)
+ 0.00 : 4c61f7: mov 0x10(%rbx),%rax
+ 0.00 : 4c61fb: test %rax,%rax
+ 0.00 : 4c61fe: je 4c6215 <find_abstract_instance+0x365>
+ : 3453 if (info_ptr >= u->info_ptr_unit && info_ptr < u->end_ptr)
+ 0.00 : 4c6200: cmp 0x60(%rax),%rdx
+ 83.20 : 4c6204: jb 4c620c <find_abstract_instance+0x35c>
+ 0.00 : 4c6206: cmp 0x78(%rax),%rdx
+ 6.89 : 4c620a: jb 4c6270 <find_abstract_instance+0x3c0>
+ : 3452 for (u = unit->prev_unit; u != NULL; u = u->prev_unit)
+ 0.00 : 4c620c: mov 0x10(%rax),%rax
+ 7.90 : 4c6210: test %rax,%rax
+ 0.00 : 4c6213: jne 4c6200 <find_abstract_instance+0x350>
+
+ The following scan can be replaced with search in a splay tree and with
+ that I can get to 1.5s and there are other symbols where the difference
+ is even bigger.
+
+ bfd/ChangeLog:
+
+ PR 29081
+ * dwarf2.c (struct addr_range): New.
+ (addr_range_intersects): Likewise.
+ (splay_tree_compare_addr_range): Likewise.
+ (splay_tree_free_addr_range): Likewise.
+ (struct dwarf2_debug_file): Add comp_unit_tree.
+ (find_abstract_instance): Use the splay tree when searching
+ for a info_ptr.
+ (stash_comp_unit): Insert to the splay tree.
+ (_bfd_dwarf2_cleanup_debug_info): Clean up the splay tree.
+
+2022-08-08 Martin Liska <mliska@suse.cz>
+
+ dwarf: use find_abstract_instance for vars and DW_AT_specification
+ The following simple test case fails when dwz is used:
+
+ $ cat demo.C
+ namespace std {
+ enum { _S_fixed, _S_floatfield = _S_fixed };
+ struct {
+ struct {};
+ }
+ __ioinit;
+ }
+
+ int main() {
+ return 0;
+ }
+
+ $ g++ demo.C -g && cp a.out b.out && dwz -m xxx.so a.out b.out && objdump -S a.out >/dev/null
+ objdump: DWARF error: could not find variable specification at offset 0x3d3
+
+ As seen the reference is defined in xxx.so shared part:
+
+ $ eu-readelf -w -N a.out | grep -A3 -B3 3d3
+ decl_column (data1) 11
+ sibling (ref_udata) [ 387]
+ [ 387] variable abbrev: 30
+ specification (GNU_ref_alt) [ 3d3]
+ location (exprloc)
+ [ 0] addr 0x404019
+ [ 396] subprogram abbrev: 32
+
+ $ eu-readelf -w -N a.out | less
+
+ ...
+
+ Compilation unit at offset 920:
+ Version: 5, Abbreviation section offset: 0, Address size: 8, Offset size: 4
+ Unit type: partial (3)
+ ...
+ [ 3d3] variable abbrev: 31
+ name (strp) "__ioinit"
+ decl_file (data1) demo.C (10)
+ decl_line (data1) 6
+ decl_column (data1) 3
+ type (ref_udata) [ 3c4]
+ declaration (flag_present) yes
+
+ With the patch the same output is emitted as before usage of dwz.
+
+ bfd/ChangeLog:
+
+ PR 29442
+ * dwarf2.c (struct varinfo): Use const char * type.
+ (scan_unit_for_symbols): Call find_abstract_instance for
+ DW_AT_specification for variables that can be in a different CU
+ (e.g. done by dwz)
+
+2022-08-08 Tsukasa OI <research_trasio@irq.a4lg.com>
+
+ Mach-O: i18n enablement on some error messages.
+ * config/obj-macho.c (obj_mach_o_get_section_names): Wrap two
+ string literals within with gettext macro.
+
+2022-08-08 Martin Liska <mliska@suse.cz>
+
+ ld: fix NEWS typos
+ ld/ChangeLog:
+
+ * NEWS: Fix 2 typos.
+
+2022-08-08 Nick Clifton <nickc@redhat.com>
+
+ Add a link to the NEWS files in the release announcement email.
+
+2022-08-08 Jiangshuai Li <jiangshuai_li@linux.alibaba.com>
+
+ gdb/csky support .reg2 for kernel 4.x and later
+ When kernel's version >= 4.x, the size of .reg2 section will be 400.
+ Contents of .reg2 are {
+ unsigned long vr[96];
+ unsigned long fcr;
+ unsigned long fesr;
+ unsigned long fid;
+ unsigned long reserved;
+ };
+
+ VR[96] means: (vr0~vr15) + (fr16~fr31), each Vector register is
+ 128-bits, each Float register is 64 bits, the total size is
+ (4*96).
+
+ In addition, for fr0~fr15, each FRx is the lower 64 bits of the
+ corresponding VRx. So fr0~fr15 and vr0~vr15 regisetrs use the same
+ offset.
+
+2022-08-08 GDB Administrator <gdbadmin@sourceware.org>
+
+ Automatic date update in version.in
+
+2022-08-07 Tom de Vries <tdevries@suse.de>
+
+ [gdb/build] Fix build with gcc 4.8.5
+ When building with gcc 4.8.5, I run into:
+ ...
+ user-regs.c:85:1: error: could not convert \
+ ‘{0l, (& builtin_user_regs.gdb_user_regs::first)}’ from \
+ ‘<brace-enclosed initializer list>’ to ‘gdb_user_regs’
+ };
+ ^
+ ...
+
+ Fix this by removing the initialization and handling regs.last == nullptr in
+ append_user_reg.
+
+ Tested on x86_64-linux.
+
+2022-08-07 Tom de Vries <tdevries@suse.de>
+
+ [gdb/symtab] Fix assert in read_addrmap_from_aranges
+ When loading the debug-names-duplicate-cu executable included in this
+ test-case, we run into:
+ ...
+ (gdb) file debug-names-duplicate-cu^M
+ Reading symbols from debug-names-duplicate-cu...^M
+ src/gdb/dwarf2/read.c:2353: internal-error: read_addrmap_from_aranges: \
+ Assertion `insertpair.second' failed.^M
+ ...
+
+ This assert was added in recent commit 75337cbc147 ("[gdb/symtab] Fix
+ .debug_aranges duplicate offset warning").
+
+ The assert triggers because the CU table in the .debug_names section contains
+ a duplicate:
+ ...
+ Version 5
+ Augmentation string: 47 44 42 00 ("GDB")
+ CU table:
+ [ 0] 0x0
+ [ 1] 0x0
+ ...
+
+ Fix this by rejecting the .debug_names index:
+ ...
+ (gdb) file debug-names-duplicate-cu^M
+ Reading symbols from debug-names-duplicate-cu...^M
+ warning: Section .debug_names has duplicate entry in CU table, \
+ ignoring .debug_names.^M
+ ...
+
+ Likewise for the case where the CU table is not sorted by increasing offset.
+
+ Bug: https://sourceware.org/bugzilla/show_bug.cgi?id=29436
+
+2022-08-07 Tom de Vries <tdevries@suse.de>
+
+ [gdb/testsuite] Add support for .debug_names in dwarf assembler
+ Add:
+ - support for a per-module .debug_names section in the dwarf assembler, and
+ - a test-case excercising this new functionality.
+
+ A per-module .debug_names section needs to have an entry in the CU list for
+ each CU in the module, which is made more difficult by two things:
+ - linking in other objects, which may contain additional CUs
+ (typically the case on openSUSE), and
+ - adding dummy CUs in the dwarf assembler.
+ We handle this by:
+ - compiling with -nostartfiles (so the test-case contains _start rather than
+ main), and
+ - disabling the dummy CU generation for the test-case.
+
+ I've kept things simple by having the test-case specify the hash value, rather
+ than adding that functionality in the dwarf assembler.
+
+ Also I've kept the bucket count to 1, which makes it trivial to satisfy the
+ requirement that "the symbol is entered into a bucket whose index is the hash
+ value modulo bucket_count".
+
+ The readelf dump of the .debug_names section from the test-case looks like:
+ ...
+ Version 5
+ Augmentation string: 47 44 42 00 ("GDB")
+ CU table:
+ [ 0] 0x0
+
+ TU table:
+
+ Foreign TU table:
+
+ Used 1 of 1 bucket.
+ Out of 2 items there are 1 bucket clashes (longest of 1 entries).
+
+ Symbol table:
+ [ 0] #eddb6232 _start: <1> DW_TAG_subprogram DW_IDX_compile_unit=0
+ [ 1] #0b888030 int: <2> DW_TAG_base_type DW_IDX_compile_unit=0
+ ...
+
+ Tested on x86_64-linux.
+
+2022-08-07 GDB Administrator <gdbadmin@sourceware.org>
+
+ Automatic date update in version.in
+
+2022-08-06 Alan Modra <amodra@gmail.com>
+
+ asan: heap buffer overflow in _bfd_error_handler
+ On coff_slurp_symbol_table printing "unrecognized storage class"
+ for a symbol error. If the symbol name is the last string in its
+ section and not terminated, we run off the end of the buffer.
+
+ * coffgen.c (build_debug_section): Terminate the section with
+ an extra 0.
+
+2022-08-06 Alan Modra <amodra@gmail.com>
+
+ asan: segfault in coff_write_auxent_fname
+ More fuzzed input file nonsense.
+
+ * coffgen.c (coff_write_symbol): Don't call coff_write_auxent_fname
+ when extrap is NULL.
+
+2022-08-06 Alan Modra <amodra@gmail.com>
+
+ msan: bfd_mach_o_layout_commands use of uninitialised value
+ Catches fuzzed input with unterminated strings that later run off the
+ end of their buffers when calling strlen.
+
+ * mach-o.c: Use size_t vars where approprite.
+ (bfd_mach_o_alloc_and_read): Add "extra" param. Allocate that
+ much extra and clear. Update all callers, those that set up
+ strings with one extra byte.
+
+2022-08-06 Alan Modra <amodra@gmail.com>
+
+ objcopy section alignment
+ bfd_set_section_alignment currently always returns true. This patch
+ changes it to return false on silly alignment values, avoiding yet
+ another way to trigger ubsan errors like coffcode.h:3192:12: runtime
+ error: shift exponent 299 is too large for 32-bit type 'int'. We'll
+ catch that one in objcopy.c:setup_sections. However, setup_sections
+ gives up on other setup operations that are necessary even after an
+ error of some sort. Change that to keep going, which might change the
+ error message but that shouldn't matter in the least.
+
+ bfd/
+ * section.c (bfd_set_section_alignment): Return false and
+ don't set alignment_power for stupidly large alignments.
+ * bfd-in2.h: Regenerate.
+ * coffcode.h (coff_compute_section_file_positions): Don't use
+ an int constant when calculating alignment.
+ binutils/
+ * objcopy.c (setup_section): Keep on going after hitting
+ non-fatal errors.
+
+2022-08-06 Alan Modra <amodra@gmail.com>
+
+ ubsan: som.c undefined shift in som_set_reloc_info
+ Do the shift using unsigned variables to avoid UB on << 8.
+
+ * som.c (som_set_reloc_info): Make v unsigned. Localise some
+ variables to their blocks.
+
+2022-08-06 GDB Administrator <gdbadmin@sourceware.org>
+
+ Automatic date update in version.in
+
+2022-08-05 Alan Modra <amodra@gmail.com>
+
+ Get rid of BFD_VMA_FMT
+ Remove the BFD_VMA_FMT defines in bfd.h and configure support.
+
+ * bfd-in.h (BFD_VMA_FMT): Don't define.
+ * configure.ac (BFD_INT64_FMT): Remove configure test.
+ * configure.com: Likewise.
+ * Makefile.in: Regenerate.
+ * bfd-in2.h: Regenerate.
+ * configure: Regenerate.
+
+2022-08-05 Alan Modra <amodra@gmail.com>
+
+ Don't use BFD_VMA_FMT in gdb and sim
+ Like commit b82817674f, this replaces BFD_VMA_FMT "x" in sim/ with
+ PRIx64 and casts to promote bfd_vma to uint64_t. The one file using
+ BFD_VMA_FMT in gdb/ instead now uses hex_string, and a typo in the
+ warning message is fixed.
+
+2022-08-05 Tom de Vries <tdevries@suse.de>
+
+ [gdb/build] Fix build breaker in language.c with gcc 7.5.0
+ When building gdb on openSUSE Leap 15.3, using gcc 7.5.0, I run into:
+ ...
+ gdb/language.c: In constructor ‘constexpr language_gdbarch::language_gdbarch()’:
+ gdb/language.c:921:8: error: use of deleted function \
+ ‘language_arch_info::language_arch_info(const language_arch_info&)’
+ struct language_gdbarch
+ ^~~~~~~~~~~~~~~~
+ In file included from gdbsupport/common-defs.h:104:0,
+ from gdb/defs.h:28,
+ from gdb/language.c:31:
+ gdb/language.h:95:28: note: declared here
+ DISABLE_COPY_AND_ASSIGN (language_arch_info);
+ ^
+ include/ansidecl.h:342:3: note: in definition of macro \
+ ‘DISABLE_COPY_AND_ASSIGN’
+ TYPE (const TYPE&) = delete; \
+ ^~~~
+ gdb/language.c: In function ‘language_gdbarch* get_language_gdbarch(gdbarch*)’:
+ gdb/language.c:936:22: note: synthesized method ‘constexpr \
+ language_gdbarch::language_gdbarch()’ first required here
+ l = new struct language_gdbarch;
+ ^~~~~~~~~~~~~~~~
+ ...
+
+ This seems to be fixed by this change in the struct language_gdbarch
+ definition:
+ ...
+ - struct language_arch_info arch_info[nr_languages] {};
+ + struct language_arch_info arch_info[nr_languages];
+ ...
+
+ Tested on x86_64-linux.
+
+2022-08-05 Tom de Vries <tdevries@suse.de>
+
+ [gdb] Add unit test for gdb::sequential_for_each
+ With commit 18a5766d09c ("[gdbsupport] Add sequential_for_each") I added a
+ drop-in replacement for gdb::parallel_for_each, but there's nothing making
+ sure that the two remain in sync.
+
+ Extend the unit test for gdb::parallel_for_each to test both.
+
+ Do this using a slightly unusual file-self-inclusion. Doing so keep things
+ readable and maintainable, and avoids macrofying functions.
+
+ Tested on x86_64-linux.
+
+2022-08-05 Tom de Vries <tdevries@suse.de>
+
+ [gdb/symtab] Use task size in parallel_for_each in dwarf2_build_psymtabs_hard
+ In dwarf2_build_psymtabs_hard, we use a parallel_for_each to distribute CUs
+ over threads.
+
+ Ensuring a fair distribution over the worker threads and main thread in terms
+ of number of CUs might not be the most efficient way, given that CUs can vary
+ in size.
+
+ Fix this by using per_cu->get_length () as the task size.
+
+ I've used this experiment to verify the performance impact:
+ ...
+ $ for n in $(seq 1 10); do \
+ time gdb -q -batch ~/firefox/libxul.so-93.0-1.1.x86_64.debug \
+ 2>&1 \
+ | grep "real:"; \
+ done
+ ...
+ and without the patch got:
+ ...
+ real: 4.71
+ real: 4.88
+ real: 4.29
+ real: 4.30
+ real: 4.65
+ real: 4.27
+ real: 4.27
+ real: 4.27
+ real: 4.75
+ real: 4.41
+ ...
+ and with the patch:
+ ...
+ real: 3.68
+ real: 3.81
+ real: 3.80
+ real: 3.68
+ real: 3.75
+ real: 3.69
+ real: 3.69
+ real: 3.74
+ real: 3.67
+ real: 3.74
+ ...
+ so that seems a reasonable improvement.
+
+ With parallel_for_each_debug set to true, we get some more detail about
+ the difference in behaviour. Without the patch we have:
+ ...
+ Parallel for: n_elements: 2818
+ Parallel for: minimum elements per thread: 1
+ Parallel for: elts_per_thread: 704
+ Parallel for: elements on worker thread 0 : 705
+ Parallel for: elements on worker thread 1 : 705
+ Parallel for: elements on worker thread 2 : 704
+ Parallel for: elements on worker thread 3 : 0
+ Parallel for: elements on main thread : 704
+ ...
+ and with the patch:
+ ...
+ Parallel for: n_elements: 2818
+ Parallel for: total_size: 1483674865
+ Parallel for: size_per_thread: 370918716
+ Parallel for: elements on worker thread 0 : 752 (size: 371811790)
+ Parallel for: elements on worker thread 1 : 360 (size: 371509370)
+ Parallel for: elements on worker thread 2 : 1130 (size: 372681710)
+ Parallel for: elements on worker thread 3 : 0 (size: 0)
+ Parallel for: elements on main thread : 576 (size: 367671995)
+ ...
+
+ Tested on x86_64-linux.
+
+2022-08-05 Tom de Vries <tdevries@suse.de>
+
+ [gdbsupport] Add task size parameter in parallel_for_each
+ Add a task_size parameter to parallel_for_each, defaulting to nullptr, and use
+ the task size to distribute similarly-sized chunks to the threads.
+
+ Tested on x86_64-linux.
+
+2022-08-05 Pedro Alves <pedro@palves.net>
+
+ Introduce gdb::make_function_view
+ This adds gdb::make_function_view, which lets you create a function
+ view from a callable without specifying the function_view's template
+ parameter. For example, this:
+
+ auto lambda = [&] (int) { ... };
+ auto fv = gdb::make_function_view (lambda);
+
+ instead of:
+
+ auto lambda = [&] (int) { ... };
+ gdb::function_view<void (int)> fv = lambda;
+
+ It is particularly useful if you have a template function with an
+ optional function_view parameter, whose type depends on the function's
+ template parameters. Like:
+
+ template<typename T>
+ void my_function (T v, gdb::function_view<void(T)> callback = nullptr);
+
+ For such a function, the type of the callback argument you pass must
+ already be a function_view. I.e., this wouldn't compile:
+
+ auto lambda = [&] (int) { ... };
+ my_function (1, lambda);
+
+ With gdb::make_function_view, you can write the call like so:
+
+ auto lambda = [&] (int) { ... };
+ my_function (1, gdb::make_function_view (lambda));
+
+ Unit tests included.
+
+ Tested by building with GCC 9.4, Clang 10, and GCC 4.8.5, on x86_64
+ GNU/Linux, and running the unit tests.
+
+ Change-Id: I5c4b3b4455ed6f0d8878cf1be189bea3ee63f626
+
+2022-08-05 Nick Clifton <nickc@redhat.com>
+
+ Update following 2.39 release
+
+2022-08-05 Alan Modra <amodra@gmail.com>
+
+ asan: ppc64_elf_get_synthetic_symtab heap buffer overflow
+ Fuzzed input files with sizes of .dynamic not a multiple of dynamic
+ tag size can result in reading past the end of the buffer with the
+ current simple checks. Fix that, and use the same check in other
+ files that process input object .dynamic section. (There is no need
+ for buffer overflow checks in the linker's generated .dynamic
+ section.)
+
+ * elf32-ppc.c (ppc_elf_get_synthetic_symtab): Sanity check
+ .dynamic content buffer reads.
+ * elf64-ppc.c (ppc64_elf_get_synthetic_symtab): Likewise.
+ * elf64-ia64-vms.c (elf64_vms_link_add_object_symbols): Likewise.
+ * elf.c (_bfd_elf_print_private_bfd_data): Simplify .dynamic
+ buffer sanity checks.
+ * elflink.c (elf_link_add_object_symbols): Avoid possible UB
+ subtracting sizeof_dyn from pointer.
+
+2022-08-05 Alan Modra <amodra@gmail.com>
+
+ Sanity check loc_offsets index
+ Fixes a segfault found by the fuzzers.
+
+ * dwarf.c (fetch_indexed_value): Return -1 on error.
+ (read_and_display_attr_value): Don't display string when
+ fetch_indexed_value returns an error. Sanity check loc_offsets
+ index.
+
+2022-08-05 Jan Beulich <jbeulich@suse.com>
+
+ binutils/Dwarf: avoid "shadowing" of glibc function name
+ As before: Old enough glibc has an (unguarded) declaration of index()
+ in string.h, which triggers a "shadows a global declaration" warning.
+
+2022-08-05 Tsukasa OI <research_trasio@irq.a4lg.com>
+
+ gas: fix a testcase broken by new ZSTD support
+ The commit 1369522f36eece1b37139a81f7f2139ba3915172 ("Recognize the new ELF
+ compression type for ZSTD.") added the new ELF compression type but it
+ accidentally broke a GAS testcase. Since testing for the section type
+ "2048" (SHF_COMPRESSED) is not going to be portable in the long term, it
+ now tests SHF_LINK_ORDER ("128") instead.
+
+ Using SHF_LINK_ORDER (with possibly sh_link == 0) is an idea by Jan Beulich.
+
+ gas/ChangeLog:
+
+ * testsuite/gas/elf/section10.s: Use SHF_LINK_ORDER to test
+ mixed numeric and alpha values.
+ * testsuite/gas/elf/section10.d: Reflect the change above.
+
+2022-08-05 Nick Clifton <nickc@redhat.com>
+
+ When gas/read.c calls mbstowcs with a NULL destination, it should set size to 0
+ PR 29447
+ * read.c (read_symbol_name): Pass 0 as the length parameter when
+ invoking mbstowc in order to check the validity of a wide string.
+
+2022-08-05 Tom de Vries <tdevries@suse.de>
+
+ [gdb] Add debug_{exp,val}
+ When debugging cc1 I heavily rely on simple one-parameter debug functions
+ that allow me to inspect a variable of a common type, like:
+ - debug_generic_expr
+ - debug_gimple_stmt
+ - debug_rtx
+ and I miss similar functions in gdb.
+
+ Add functions to dump variables of types 'value' and 'expression':
+ - debug_exp, and
+ - debug_val.
+
+ Tested on x86_64-linux, by breaking on varobj_create, and doing:
+ ...
+ (gdb) call debug_exp (var->root->exp.get ())
+ &"Operation: OP_VAR_VALUE\n"
+ &" Block symbol:\n"
+ &" Symbol: aaa\n"
+ &" Block: 0x2d064f0\n"
+ (gdb)
+ ...
+ and:
+ ...
+ (gdb) call debug_val (value)
+ &"5"
+ (gdb)
+ ...
+
+2022-08-05 Luca Boccassi <bluca@debian.org>
+
+ Add gold support for --package-metadata option.
+ Following the same format as the implementation in ld:
+ 9e2bb0cb5e74aed4158f08495534922d7108f928
+
+ Generate a .note.package FDO package metadata ELF note, following
+ the spec: https://systemd.io/ELF_PACKAGE_METADATA/
+
+ If the jansson library is available at build time (and it is explicitly
+ enabled), link ld to it, and use it to validate that the input is
+ correct JSON, to avoid writing garbage to the file. The
+ configure option --enable-jansson has to be used to explicitly enable
+ it (error out when not found). This allows bootstrappers (or others who
+ are not interested) to seamlessly skip it without issues.
+
+ elfcpp/
+ * elfcpp.h: Add FDO_PACKAGING_METADATA note type.
+
+ gold/
+ * Makefile.am: Add jansson flags and libraries.
+ * configure.ac: Check for jansson library.
+ * layout.cc (Layout::create_notes): Call create_package_metadata().
+ (Layout::create_package_metadata): New function.
+ * layout.h (Layout::create_package_metadata): New function.
+ (Layout::package_metadata_note_): New data member.
+ * options.h (class General_options): Add --package-metadata option.
+ * testsuite/Makefile.am (object_unittest): Add jansson libraries.
+ (binary_unittest): Likewise.
+ (leb128_unittest): Likewise.
+ (overflow_unittest): Likewise.
+ (package_metadata_test): New test.
+ * testsuite/package_metadata_main.c: New test source.
+
+2022-08-05 Cary Coutant <ccoutant@gmail.com>
+
+ Recognize the new ELF compression type for ZSTD.
+ There is more work to be done to actually support compression and
+ decompression using the zstd library, but I will leave that to the
+ champions of the new compression option.
+
+ binutils/
+ * binutils/readelf.c (process_section_headers): Add support for
+ ELFCOMPRESS_ZSTD.
+
+2022-08-05 GDB Administrator <gdbadmin@sourceware.org>
+
+ Automatic date update in version.in
+
+2022-08-04 Tom Tromey <tom@tromey.com>
+
+ Use registry in gdbarch
+ gdbarch implements its own registry-like approach. This patch changes
+ it to instead use registry.h. It's a rather large patch but largely
+ uninteresting -- it's mostly a straightforward conversion from the old
+ approach to the new one.
+
+ The main benefit of this change is that it introduces type safety to
+ the gdbarch registry. It also removes a bunch of code.
+
+ One possible drawback is that, previously, the gdbarch registry
+ differentiated between pre- and post-initialization setup. This
+ doesn't seem very important to me, though.
+
+2022-08-04 Tom Tromey <tom@tromey.com>
+
+ Allow registry to refer to const types
+ So far, the registry hasn't been used to refer to a 'const' type, but
+ this changes with the gdbarch change. This patch arranges to let the
+ registry store a pointer-to-const, by removing const in the 'set'
+ method.
+
+ Use new and delete for gdbarch
+ This changes gdbarch to use new and delete.
+
+ Use bool in gdbarch
+ This changes gdbarch to use bool for initialized_p.
+
+2022-08-04 Tom de Vries <tdevries@suse.de>
+
+ [gdb/testsuite] Fix .debug_aranges in gdb.dwarf2/fission-loclists.S
+ When running test-case gdb.dwarf2/fission-loclists.exp, I noticed:
+ ...
+ warning: Section .debug_aranges in fission-loclists has duplicate \
+ debug_info_offset 0x8f, ignoring .debug_aranges.^M
+ ...
+
+ Fix this by removing the duplicate .debug_aranges entry.
+
+ Tested on x86_64-linux.
+
+2022-08-04 Tom de Vries <tdevries@suse.de>
+
+ [gdb/testsuite] Fix ERROR in gdb.base/watchpoint-unaligned.exp
+ In PR23888 an error is reported:
+ ...
+ ERROR: tcl error sourcing watchpoint-unaligned.exp.
+ ERROR: expected boolean value but got ""
+ while executing
+ "if {$wpnum} {
+ ...
+
+ This presumably happens when:
+ - skip_hw_watchpoint_tests returns 0 meaning hw watchpoints are supported
+ - gdb fails to set a hw watchpoint and instead sets a sw watchpoint
+
+ That particular situation is handled for arm:
+ ...
+ -re "Watchpoint (\[0-9\]+): .*\r\n$gdb_prompt $" {
+ if {[istarget "arm*-*-*"]} {
+ untested $test
+ set wpnum 0
+ }
+ }
+ ...
+ but not for any other targets so wpnum remains "", triggering the ERROR.
+
+ Possibly this has been fixed for powerpc by commit 8d4e4d13afb ("gdb Power 9
+ add test for HW watchpoint support."), but it's still possible for other
+ targets.
+
+ Fix this by:
+ - initializing wpnum to 0 instead of ""
+ - signalling the failure to set a hw watchpoint by a fail
+
+ Tested on x86_64-linux, also by adding:
+ ...
+ gdb_test_no_output "set can-use-hw-watchpoints 0"
+ ...
+ and verifying that it triggers the fail.
+
+ Bug: https://sourceware.org/bugzilla/show_bug.cgi?id=23888
+
+2022-08-04 Tom de Vries <tdevries@suse.de>
+
+ [gdb/tdep] Fix gdb.base/large-frame.exp for aarch64
+ On aarch64, I run into:
+ ...
+ FAIL: gdb.base/large-frame.exp: optimize=-O0: backtrace
+ ...
+
+ The problem is that the architecture-specific prologue analyzer fails to
+ handle the first two insns in the prologue properly:
+ ...
+ 0000000000400610 <func>:
+ 400610: d2880210 mov x16, #0x4010
+ 400614: cb3063ff sub sp, sp, x16
+ 400618: a9007bfd stp x29, x30, [sp]
+ 40061c: 910003fd mov x29, sp
+ 400620: 910043a0 add x0, x29, #0x10
+ 400624: 97fffff0 bl 4005e4 <blah>
+ ...
+ so we get:
+ ...
+ $ gdb -q -batch ./outputs/gdb.base/large-frame/large-frame-O0 -ex "b func"
+ Breakpoint 1 at 0x400614
+ ...
+
+ Fix this by:
+ - fixing the support for the first insn to extract the immediate operand, and
+ - adding support for the second insn,
+ such that we have:
+ ...
+ Breakpoint 1 at 0x400624
+ ...
+ Note that we're overshooting by one insn (0x400620 is the first insn after the
+ prologue), but that's a pre-existing problem.
+
+ Tested on aarch64-linux.
+
+ Bug: https://sourceware.org/bugzilla/show_bug.cgi?id=29408
+
+2022-08-04 Alan Modra <amodra@gmail.com>
+
+ Don't use BFD_VMA_FMT in binutils
+ BFD_VMA_FMT can't be used in format strings that need to be
+ translated, because the translation won't work when the type of
+ bfd_vma differs from the machine used to compile .pot files. We've
+ known about this for a long time, but patches slip through review.
+
+ So just get rid of BFD_VMA_FMT, instead using the appropriate PRId64,
+ PRIu64, PRIx64 or PRIo64 and SCN variants for scanf. The patch is
+ mostly mechanical, the only thing requiring any thought is casts
+ needed to preserve PRId64 output from bfd_vma values, or to preserve
+ one of the unsigned output formats from bfd_signed_vma values.
+
+2022-08-04 Alan Modra <amodra@gmail.com>
+
+ Re: Get rid of fprintf_vma and sprintf_vma
+ Commit f493c2174e messed the formatting in linker map files,
+ particularly for 32-bit builds where a number of tests using map files
+ regressed. I should have noticed the BFD64 conditional printing of
+ spaces to line up output due to the original %V printing hex vmas with
+ 16 digits when BFD64 and 8 digits when not. Besides that, it is nicer
+ to print 32-bit vmas for 32-bit targets. So change %V back to be
+ target dependent, now using bfd_sprintf_vma. Since minfo doesn't
+ return the number of chars printed, that means some places that
+ currently use %V must instead sprintf to a buffer in order to find the
+ length printed.
+
+ * ldmisc.h (print_spaces): Declare.
+ (print_space): Change to a macro.
+ * ldmisc.c (vfinfo): Use bfd_sprintf_vma for %V. Tidy %W case.
+ (print_space): Delete.
+ (print_spaces): New function.
+ * emultempl/aix.em (print_symbol): Use print_spaces.
+ * ldctor.c (ldctor_build_sets): Likewise.
+ * ldmain.c (add_archive_element): Likewise.
+ * ldlang.c (print_one_symbol, lang_print_asneeded): Likewise.
+ (print_output_section_statement, print_data_statement): Likewise.
+ (print_reloc_statement, print_padding_statement): Likewise.
+ (print_assignment): Likewise. Also replace %V printing of vmas
+ with printing to a buffer in order to properly format output.
+ (print_input_section, lang_one_common): Likewise.
+
+2022-08-04 Alan Modra <amodra@gmail.com>
+
+ MIPS: Use R_MIPS_REL16 for BFD_RELOC_16
+ R_MIPS_REL16 isn't a pc-relative reloc as the name might indicate.
+
+ * elf64-mips.c (mips_reloc_map): Map BFD_RELOC_16 to R_MIPS_REL16.
+ * elfn32-mips.c (mips_reloc_map): Likewise.
+
+2022-08-04 GDB Administrator <gdbadmin@sourceware.org>
+
+ Automatic date update in version.in
+
+2022-08-03 H.J. Lu <hjl.tools@gmail.com>
+
+ elf: Reset alignment for each PT_LOAD segment
+ Reset alignment for each PT_LOAD segment to avoid using alignment from
+ the previous PT_LOAD segment.
+
+ bfd/
+
+ PR ld/29435
+ * elf.c (assign_file_positions_for_load_sections): Reset
+ alignment for each PT_LOAD segment.
+
+ ld/
+
+ PR ld/29435
+ * testsuite/ld-elf/pr29435.d: New file.
+ * testsuite/ld-elf/pr29435.s: Likewise.
+
+2022-08-03 Tom Tromey <tom@tromey.com>
+
+ Use unique_ptr to destroy per-bfd object
+ In some cases, the objfile owns the per-bfd object. This is yet
+ another object that can sometimes be destroyed before the registry is
+ destroyed, possibly reslting in a use-after-free. Also, I noticed
+ that the condition for deleting the object is not the same as the
+ condition used to create it -- so it could possibly result in a memory
+ leak in some situations. This patch fixes the problem by introducing
+ a new unique_ptr that holds this object when necessary.
+
+ Use auto_obstack in objfile
+ This changes objfile to use an auto_obstack. This helps prevent
+ use-after-free bugs, because it ensures that anything allocated on the
+ objfile obstack will live past the point at which the registry object
+ is destroyed.
+
+ Use gdb_bfd_ref_ptr in objfile
+ This changes struct objfile to use a gdb_bfd_ref_ptr. In addition to
+ removing some manual memory management, this fixes a use-after-free
+ that was introduced by the registry rewrite series. The issue there
+ was that, in some cases, registry shutdown could refer to memory that
+ had already been freed. This help fix the bug by delaying the
+ destruction of the BFD reference (and thus the per-bfd object) until
+ after the registry has been shut down.
+
+2022-08-03 Ruud van der Pas <ruud.vanderpas@oracle.com>
+
+ gprofng: fix bug 29410 - Argument " 0." isn't numeric in numeric gt (>)
+ gprofng/Changelog:
+ 2022-08-02 Ruud van der Pas <ruud.vanderpas@oracle.com>
+
+ PR gprofng/29410
+ * gp-display-html/gp-display-html.in: Remove non-breaking spaces.
+
+2022-08-03 Alan Modra <amodra@gmail.com>
+
+ Fix a conflict between the linker's need to rename some PE format input libraries and the BFD library's file caching mechanism.
+ PR 29389
+ bfd * bfd.c (BFD_CLOSED_BY_CACHE): New bfd flag.
+ * cache.c (bfd_cache_delete): Set BFD_CLOSED_BY_DELETE on the
+ closed bfd.
+ (bfd_cache_lookup_worker): Clear BFD_CLOSED_BY_DELETE on the newly
+ reopened bfd.
+ * opncls.c (bfd_set_filename): Refuse to change the name of a bfd
+ that has been closed by bfd_cache_delete. Mark changed bfds as
+ uncacheable.
+ * bfd-in2.h: Regenerate.
+
+ ld * ldlang.h (lang_input_statement_struct): Add sort_key field.
+ * emultempl/pe.em (after_open): If multiple import libraries refer
+ to the same bfd, store their names in the sort_key field.
+ * emultempl/pep.em (after_open): Likewise.
+ * ldlang.c (sort_filename): New function. Returns the filename to
+ be used when sorting input files.
+ (wild_sort): Use the sort_filename function.
+
+2022-08-03 Enze Li <enze.li@hotmail.com>
+
+ gdb/amd64: clean up unused variable
+ When building with clang 15, I got this,
+
+ CXX amd64-tdep.o
+ amd64-tdep.c:1410:13: error: variable 'insn' set but not used[-Werror,-Wunused-but-set-variable]
+ gdb_byte *insn = insn_details->raw_insn + modrm_offset;
+ ^
+ 1 error generated.
+
+ The function that uses this variable has been removed in this commit,
+
+ commit 870f88f7551b0f2d6aaaa36fb684b5ff8f468107
+ Date: Mon Apr 18 13:16:27 2016 -0400
+
+ remove trivialy unused variables
+
+ Fix this by removing unused variable.
+
+ Tested by rebuilding on x86_64-linux with clang 15 and gcc 12.
+
+2022-08-03 Lancelot SIX <lancelot.six@amd.com>
+
+ gdb: Fix regression in varobj recreation
+ Commit bc20e562ec0 "Fix use after free in varobj" introduced a
+ regression. This commit makes sure that the varobj object does not
+ keeps stale references to object being freed when we unload an objfile.
+ This includes the "valid_block" field which is reset to nullptr if the
+ pointed to block is tied to an objfile being freed.
+
+ However, at some point varobj_invalidate_iter might try to recreate
+ varobjs tracking either floating or globals. Varobj tracking globals
+ are identified as having the "valid_block" field set nullptr, but as
+ bc20e562ec0 might clear this field, we have lost the ability to
+ distinguish between varobj referring to globals and non globals.
+
+ Fix this by introducing a "global" flag which tracks if a given varobj
+ was initially created as tracking a global.
+
+ Bug: https://sourceware.org/bugzilla/show_bug.cgi?id=29426
+
+2022-08-03 Alan Modra <amodra@gmail.com>
+
+ Re: PE objdump -x
+ All of these buffer overrun tests are better written as a comparison
+ against size remaining, due to ISO C 9899 standard 6.5.2 para 8
+ regarding adding a constant to a pointer:
+
+ "If both the pointer operand and the result point to elements of the
+ same array object, or one past the last element of the array object,
+ the evaluation shall not produce an overflow; otherwise, the behavior
+ is undefined."
+
+ So "ex_dta + 4" might be undefined behaviour, if you interpret "the
+ array object" in this case to be the malloc'd section contents!
+
+ * pei-x86_64.c (pex64_get_unwind_info): Tidy sanity checks.
+ (pex64_xdata_print_uwd_codes): Likewise.
+
+2022-08-03 Jan Beulich <jbeulich@suse.com>
+
+ x86: improve/shorten vector zeroing-idiom optimization conditional
+ - Drop the rounding type check: We're past template matching, and none
+ of the involved insns support embedded rounding.
+ - Drop the extension opcode check: None of the involved opcodes have
+ variants with it being other than None.
+ - Instead check opcode space, even if just to be on the safe side going
+ forward.
+ - Reduce the number of comparisons by folding two groups.
+
+ x86: properly mark i386-only insns
+ Just like all Size64 insns are marked Cpu64, all Size32 insns ought to
+ be marked Cpu386.
+
+ x86: also use D for MOVBE
+ First of all rename the meanwhile misleading Opcode_SIMD_FloatD, as it
+ has also been used for KMOV* and BNDMOV. Then simplify the condition
+ selecting which form if "reversing" to use - except for the MOV to/from
+ control/debug/test registers all extended opcode space insns use bit 0
+ (rather than bit 1) to indicate the direction (from/to memory) of an
+ operation. With that, D can simply be set on the first of the two
+ templates, while the other can be dropped.
+
+2022-08-03 GDB Administrator <gdbadmin@sourceware.org>
+
+ Automatic date update in version.in
+
+2022-08-03 Cary Coutant <ccoutant@gmail.com>
+
+ Add ELFCOMPRESS_ZSTD.
+ include/elf/
+ * common.h: Add ELFCOMPRESS_ZSTD.
+
+2022-08-02 John Baldwin <jhb@FreeBSD.org>
+
+ fbsd-nat: Correct the return type of the have_regset method.
+ During the development of 40c23d880386d6e8202567eaa2a6b041feb1a652,
+ the return value of fbsd_nat_target::have_regset was changed from a
+ simple boolean to returning the size of the register set. The
+ comments and callers were all updated for this change, but the actual
+ return type was accidentally left as a bool. This change fixes the
+ return type to be a size_t.
+
+ Current callers of this only checked the value against 0 and thus
+ still worked correctly.
+
+2022-08-02 Jan Beulich <jbeulich@suse.com>
+
+ ELF: emit symbol table when there are relocations
+ Even when there are no symbols (e.g. all relocations being against
+ absolute values), a symbol table (with just the first placeholder entry)
+ needs to be emitted. Otherwise tools like objdump won't properly process
+ the relocations. The respective checks in assign_section_numbers() and
+ _bfd_elf_compute_section_file_positions() support also this view. Oddly
+ enough so far HAS_RELOC was only set when reading in an object file, but
+ not when generating one anew; the flag would only have been cleared when
+ no relocations were found (anymore).
+
+ While there also amend the affected function's leading comment to also
+ mention gas.
+
+2022-08-02 Matthew Malcomson <hardenedapple@gmail.com>
+
+ ld: aarch64: Adjust TLS relaxation condition
+ In aarch64_tls_transition_without_check and elfNN_aarch64_tls_relax we
+ choose whether to perform a relaxation to an IE access model or an LE
+ access model based on whether the symbol itself is marked as local (i.e.
+ `h == NULL`).
+
+ This is problematic in two ways. The first is that sometimes a global
+ dynamic access can be relaxed to an initial exec access when creating a
+ shared library, and if that happens on a local symbol then we currently
+ relax it to a local exec access instead. This usually does not happen
+ since we only relax an access if aarch64_can_relax_tls returns true and
+ aarch64_can_relax_tls does not have the same problem. However, it can
+ happen when we have seen both an IE and GD access on the same symbol.
+ This case is exercised in the newly added testcase tls-relax-gd-ie-2.
+
+ The second problem is that deciding based on whether the symbol is local
+ misses the case when the symbol is global but is still non-interposable
+ and known to be located in the executable. This happens on all global
+ symbols in executables.
+ This case is exercised in the newly added testcase tls-relax-ie-le-4.
+
+ Here we adjust the condition we base our relaxation on so that we relax
+ to local-exec if we are creating an executable and the relevant symbol
+ we're accessing is stored inside that executable.
+
+ -- Updating tests for new relaxation criteria
+
+ Many of the tests added to check our relaxation to IE were implemented
+ by taking advantage of the fact that we did not relax a global symbol
+ defined in an executable.
+
+ Since a global symbol defined in an executable is still not
+ interposable, we know that a TLS version of such a symbol will be in the
+ main TLS block. This means that we can perform a stronger relaxation on
+ such symbols and relax their accesses to a local-exec access.
+
+ Hence we have to update all tests that relied on the older suboptimal
+ decision making.
+
+ The two cases when we still would want to relax a general dynamic access
+ to an initial exec one are:
+ 1) When in a shared library and accessing a symbol which we have already
+ seen accessed with an initial exec access sequence.
+ 2) When in an executable and accessing a symbol defined in a shared
+ library.
+
+ Both of these require shared library support, which means that these
+ tests are now only available on targets with that.
+
+ I have chosen to switch the existing testcases from a plain executable
+ to one dynamically linked to a shared object as that doesn't require
+ changing the testcases quite so much (just requires accessing a
+ different variable rather than requiring adding another code sequence).
+
+ The tls-relax-all testcase was an outlier to the above approach, since
+ it included a general dynamic access to both a local and global symbol
+ and inspected for the difference accordingly.
+
+2022-08-02 Matthew Malcomson <hardenedapple@gmail.com>
+
+ ld: aarch64: Update test linker scripts relocs.ld and relocs-ilp32.ld
+ The updates are to ensure that the .data section exists. This means
+ that we always have a data section. That means that we don't create a
+ RWX segment and avoid the corresponding warning.
+
+ We get this warning when testing aarch64-none-elf with -mcmodel=tiny.
+ N.b. this changes quite a few testcases from fail to pass.
+
+2022-08-02 Victor Do Nascimento <Victor.DoNascimento@arm.com>
+
+ arm: Add cfi expression support for ra_auth_code
+ This patch extends assembler support for the use of register names to
+ allow for pseudo-registers, e.g. ra_auth_code register.
+ This is done particularly with CFI directives in mind, allowing for
+ expressions of the type:
+
+ .cfi_register ra_auth_code, 12
+
+ gas/Changelog:
+
+ * config/tc-arm.c (tc_arm_regname_to_dw2regnum): Add
+ REG_TYPE_PSEUDO handling.
+ * testsuite/gas/arm/cfi-pacbti-m-readelf.d: New.
+ * testsuite/gas/arm/cfi-pacbti-m.s: New.
+
+2022-08-02 Victor Do Nascimento <Victor.DoNascimento@arm.com>
+
+ arm: Use DWARF numbering convention for pseudo-register representation
+ This patch modifies the internal `struct reg_entry' numbering of DWARF
+ pseudo-registers to match values assigned in DWARF standards (see "4.1
+ DWARF register names" in [1])so ra_auth_code goes from 12 to 143 and
+ amends the unwinder .save directive-processing code to correctly handle
+ mixed register-type save directives.
+
+ The mechanism for splitting the register list is also re-written to
+ comply with register ordering on push statements, being that registers
+ are stored on the stack in numerical order, with the lowest numbered
+ register at the lowest address [2].
+
+ Consequently, the parsing of the hypothetical directive
+
+ .save{r4-r7, r10, ra_auth_core, lr}
+
+ has been changed such as rather than producing
+
+ .save{r4-r7, r10}
+ .save{ra_auth_code}
+ .save{lr}
+
+ as was the case with previous implementation, now produces:
+
+ .save{lr}
+ .save{ra_auth_code}
+ .save{r4-r7, r10}
+
+ [1] <https://github.com/ARM-software/abi-aa/blob/main/aadwarf32/aadwarf32.rst>
+ [2] <https://developer.arm.com/documentation/dui0473/j/arm-and-thumb-instructions/push>
+
+ gas/Changelog:
+
+ * config/tc-arm.c (REG_RA_AUTH_CODE): New.
+ (parse_dot_save): Likewise.
+ (parse_reg_list): Remove obsolete code.
+ (reg_names): Set ra_auth_code to 143.
+ (s_arm_unwind_save): Handle core and pseudo-register lists via
+ parse_dot_save.
+ (s_arm_unwind_save_mixed): Deleted.
+ (s_arm_unwind_save_pseudo): Handle one register at a time.
+ * testsuite/gas/arm/unwind-pacbti-m-readelf.d: Fix test.
+ * testsuite/gas/arm/unwind-pacbti-m.d: Likewise.
+
+2022-08-02 Alan Modra <amodra@gmail.com>
+
+ PE objdump -x
+ objdump -x on PE executables produces lots of "xdata section corrupt"
+ and "corrupt unwind data" warnings, and refuses to dump that info. It
+ turns out that the sanity checks were bad, not the data. Fix them.
+
+ * pei-x86_64.c (pex64_get_unwind_info): Correct buffer overrun
+ sanity checks.
+ (pex64_xdata_print_uwd_codes): Similarly.
+
+2022-08-02 Jan Beulich <jbeulich@suse.com>
+
+ x86: XOP shift insns don't really allow B suffix
+ By mistake it was permitted to be used from the very introduction of XOP
+ support.
+
+2022-08-02 GDB Administrator <gdbadmin@sourceware.org>
+
+ Automatic date update in version.in
+
+2022-08-01 Martin Storsjö <martin@martin.st>
+
+ ld: Support the -exclude-symbols option via COFF def files, with the EXCLUDE_SYMBOLS keyword
+ This was requested in review.
+
+ ld: Add support for a new option, -exclude-symbols, in COFF object file directives
+ This maps to the same as ld's --exclude-symbols command line option,
+ but allowing specifying the option via directives embedded in the
+ object files instead of passed manually on the command line.
+
+2022-08-01 Tom de Vries <tdevries@suse.de>
+
+ [gdb/symtab] Fix .debug_aranges duplicate offset warning
+ The function read_addrmap_from_aranges contains code to issue a warning:
+ ...
+ if (!insertpair.second)
+ {
+ warning (_("Section .debug_aranges in %s has duplicate "
+ "debug_info_offset %s, ignoring .debug_aranges."),
+ objfile_name (objfile), sect_offset_str (per_cu->sect_off));
+ return false;
+ }
+ ...
+ but the warning is in fact activated when all_comp_units has duplicate
+ entries, which is very misleading.
+
+ Fix this by:
+ - adding a test-case that should trigger the warning,
+ - replacing the current implementation of the warning with an
+ assert that all_comp_units should not contain duplicates, and
+ - properly re-implementing the warning, such that it is triggered
+ by the test-case.
+
+ Tested on x86_64-linux.
+
+ Bug: https://sourceware.org/bugzilla/show_bug.cgi?id=29381
+
+2022-08-01 Jan Beulich <jbeulich@suse.com>
+
+ x86: SKINIT with operand needs IgnoreSize
+ Without it in 16-bit mode a pointless operand size prefix would be
+ emitted.
+
+2022-08-01 WANG Xuerui <git@xen0n.name>
+
+ opcodes: LoongArch: add "ret" instruction to reduce typing
+ This syntactic sugar is present in both classical and emerging
+ architectures, like Alpha, SPARC and RISC-V, and assembler macros
+ doing the same thing can already be found in the wild e.g. [1], proving
+ the feature's popularity. It's better to provide support directly in the
+ assembler so downstream users wouldn't have to re-invent this over and
+ over again.
+
+ [1]: https://sourceware.org/git/?p=glibc.git;a=blob;f=sysdeps/unix/sysv/linux/loongarch/sysdep.h;h=c586df819cd90;hb=HEAD#l28
+
+2022-08-01 WANG Xuerui <git@xen0n.name>
+
+ opcodes: LoongArch: make all non-native jumps desugar to canonical b{lt/ge}[u] forms
+ Also re-order the jump/branch opcodes while at it, so that insns are
+ sorted in ascending order according to opcodes, and the label form
+ preceding the real definition.
+
+2022-08-01 Alan Modra <amodra@gmail.com>
+
+ Get rid of fprintf_vma and sprintf_vma
+ These two macros print either a 16 digit hex number or an 8 digit
+ hex number. Unfortunately they depend on both target and host, which
+ means that the output for 32-bit targets may be either 8 or 16 hex
+ digits.
+
+ Replace them in most cases with code that prints a bfd_vma using
+ PRIx64. In some cases, deliberately lose the leading zeros.
+ This change some output, notably in base/offset fields of m68k
+ disassembly which I think looks better that way, and in error
+ messages. I've kept leading zeros in symbol dumps (objdump -t)
+ and in PE header dumps.
+
+ bfd/
+ * bfd-in.h (fprintf_vma, sprintf_vma, printf_vma): Delete.
+ * bfd-in2.h: Regenerate.
+ * bfd.c (bfd_sprintf_vma): Don't use sprintf_vma.
+ (bfd_fprintf_vma): Don't use fprintf_vma.
+ * coff-rs6000.c (xcoff_reloc_type_tls): Don't use sprintf_vma.
+ Instead use PRIx64 to print bfd_vma values.
+ (xcoff_ppc_relocate_section): Likewise.
+ * cofflink.c (_bfd_coff_write_global_sym): Likewise.
+ * mmo.c (mmo_write_symbols_and_terminator): Likewise.
+ * srec.c (srec_write_symbols): Likewise.
+ * elf32-xtensa.c (print_r_reloc): Similarly for fprintf_vma.
+ * pei-x86_64.c (pex64_dump_xdata): Likewise.
+ (pex64_bfd_print_pdata_section): Likewise.
+ * som.c (som_print_symbol): Likewise.
+ * ecoff.c (_bfd_ecoff_print_symbol): Use bfd_fprintf_vma.
+ opcodes/
+ * dis-buf.c (perror_memory, generic_print_address): Don't use
+ sprintf_vma. Instead use PRIx64 to print bfd_vma values.
+ * i386-dis.c (print_operand_value, print_displacement): Likewise.
+ * m68k-dis.c (print_base, print_indexed): Likewise.
+ * ns32k-dis.c (print_insn_arg): Likewise.
+ * ia64-gen.c (_opcode_int64_low, _opcode_int64_high): Delete.
+ (opcode_fprintf_vma): Delete.
+ (print_main_table): Use PRIx64 to print opcode.
+ binutils/
+ * od-macho.c: Replace all uses of printf_vma with bfd_printf_vma.
+ * objcopy.c (copy_object): Don't use sprintf_vma. Instead use
+ PRIx64 to print bfd_vma values.
+ (copy_main): Likewise.
+ * readelf.c (CHECK_ENTSIZE_VALUES): Likewise.
+ (dynamic_section_mips_val): Likewise.
+ (print_vma): Don't use printf_vma. Instead use PRIx64 to print
+ bfd_vma values.
+ (dump_ia64_vms_dynamic_fixups): Likewise.
+ (process_version_sections): Likewise.
+ * rddbg.c (stab_context): Likewise.
+ gas/
+ * config/tc-i386.c (offset_in_range): Don't use sprintf_vma.
+ Instead use PRIx64 to print bfd_vma values.
+ (md_assemble): Likewise.
+ * config/tc-mips.c (load_register, macro): Likewise.
+ * messages.c (as_internal_value_out_of_range): Likewise.
+ * read.c (emit_expr_with_reloc): Likewise.
+ * config/tc-ia64.c (note_register_values): Don't use fprintf_vma.
+ Instead use PRIx64 to print bfd_vma values.
+ (print_dependency): Likewise.
+ * listing.c (list_symbol_table): Use bfd_sprintf_vma.
+ * symbols.c (print_symbol_value_1): Use %p to print pointers.
+ (print_binary): Likewise.
+ (print_expr_1): Use PRIx64 to print bfd_vma values.
+ * write.c (print_fixup): Use %p to print pointers. Don't use
+ fprintf_vma.
+ * testsuite/gas/all/overflow.l: Update expected output.
+ * testsuite/gas/m68k/mcf-mov3q.d: Likewise.
+ * testsuite/gas/m68k/operands.d: Likewise.
+ * testsuite/gas/s12z/truncated.d: Likewise.
+ ld/
+ * deffilep.y (def_file_print): Don't use fprintf_vma. Instead
+ use PRIx64 to print bfd_vma values.
+ * emultempl/armelf.em (gld${EMULATION_NAME}_finish): Don't use
+ sprintf_vma. Instead use PRIx64 to print bfd_vma values.
+ * emultempl/pe.em (gld${EMULATION_NAME}_finish): Likewise.
+ * ldlang.c (lang_map): Use %V to print region origin.
+ (lang_one_common): Don't use sprintf_vma.
+ * ldmisc.c (vfinfo): Don't use fprintf_vma or sprintf_vma.
+ * pe-dll.c (pe_dll_generate_def_file): Likewise.
+ gdb/
+ * remote.c (remote_target::trace_set_readonly_regions): Replace
+ uses of sprintf_vma with bfd_sprintf_vma.
+
+2022-08-01 liuzhensong <liuzhensong@loongson.cn>
+
+ LoongArch: Set defaults to exec stack 0.
+
+2022-08-01 Alan Modra <amodra@gmail.com>
+
+ libctf: Avoid use of uninitialised variables
+ * ctf-link.c (ctf_link_add_ctf_internal): Don't free uninitialised
+ pointers.
+
+2022-08-01 Alan Modra <amodra@gmail.com>
+
+ PR29348, BFD_VMA_FMT wrong
+ There is a problem with my commit 0e3c1eebb2, which replaced
+ bfd_uint64_t with uint64_t: Some hosts typedef int64_t to long long
+ even when long is the same size as long long. That confuses the code
+ choosing one of "l", "ll", or "I64" for BFD_VMA_FMT, and results in
+ warnings.
+
+ Write a direct configure test for the printf int64_t style instead.
+ This removes the last use of BFD_HOST_64BIT_LONG, so delete that.
+ Note that the changes to configure.com are pure guesswork.
+
+ PR 29348
+ * bfd-in.h (BFD_HOST_64BIT_LONG): Don't define.
+ (BFD_VMA_FMT): Define using BFD_INT64_FMT when 64-bit.
+ (bfd_vma, bfd_signed_vma): Move comments to 64-bit typedefs.
+ * configure.ac (BFD_HOST_64BIT_LONG): Delete.
+ (BFD_INT64_FMT): New config test.
+ * configure.com: Update similarly.
+ * Makefile.in: Regenerate.
+ * bfd-in2.h: Regenerate.
+ * configure: Regenerate.
+
+2022-08-01 GDB Administrator <gdbadmin@sourceware.org>
+
+ Automatic date update in version.in
+
+2022-07-31 GDB Administrator <gdbadmin@sourceware.org>
+
+ Automatic date update in version.in
+
+2022-07-30 Tom de Vries <tdevries@suse.de>
+
+ [gdb/testsuite] Fix gdb.ada/literals.exp with aarch64
+ On aarch64-linux, I run into:
+ ...
+ (gdb) print 16#ffffffffffffffff#^M
+ $7 = 18446744073709551615^M
+ (gdb) FAIL: gdb.ada/literals.exp: print 16#ffffffffffffffff#
+ ...
+ while on x86_64-linux instead, I get:
+ ...
+ (gdb) print 16#ffffffffffffffff#^M
+ $7 = -1^M
+ (gdb) PASS: gdb.ada/literals.exp: print 16#ffffffffffffffff#
+ ...
+
+ We can easily reproduce this on x86_64-linux using:
+ ...
+ $ gdb -q -batch -ex "set lang ada" -ex "set arch i386" \
+ -ex "print 16#ffffffffffffffff#"
+ $1 = -1
+ $ gdb -q -batch -ex "set lang ada" -ex "set arch aarch64" \
+ -ex "print 16#ffffffffffffffff#"
+ $1 = 18446744073709551615
+ ...
+
+ With i386, we have:
+ ...
+ (gdb) p int_bits
+ $3 = 32
+ (gdb) p long_bits
+ $4 = 32
+ (gdb) p long_long_bits
+ $5 = 64
+ ...
+ and so in processInt we hit the fits-in-unsigned-long-long case where we use
+ as type long long:
+ ...
+ /* Note: Interprets ULLONG_MAX as -1. */
+ yylval.typed_val.type = type_long_long (par_state);
+ ...
+
+ With aarch64, we have instead:
+ ...
+ (gdb) p int_bits
+ $1 = 32
+ (gdb) p long_bits
+ $2 = 64
+ (gdb) p long_long_bits
+ $3 = 64
+ ...
+ and so in processInt we hit the fits-in-unsigned-long case where we use
+ as type unsigned long:
+ ...
+ yylval.typed_val.type
+ = builtin_type (par_state->gdbarch ())->builtin_unsigned_long;
+ ...
+
+ It's not clear why for ada we're using long long for the
+ fits-in-unsigned-long-long case.
+
+ Fix this by using unsigned long long for the fits-in-unsigned-long-long case,
+ meaning the new reference output is 18446744073709551615 instead of -1.
+
+ Tested on x86_64-linux.
+
+ Bug: https://sourceware.org/bugzilla/show_bug.cgi?id=29416
+
+2022-07-30 Simon Marchi <simon.marchi@efficios.com>
+
+ gdb/testsuite: add macros test for source files compiled in various ways
+ Using different ways of passing source file paths to compilers results n
+ different file and directory paths in the line header. For example:
+
+ - gcc foo.c
+ - gcc ./foo.c
+ - gcc ../cwd/foo.c
+ - gcc $PWD/foo.c
+
+ Because of this, GDB sometimes failed to look up macros. The previous
+ patch fixed that as much as possible. This patch adds the corresponding
+ tests.
+
+ Add both a DWARF assembler-based test and a regular test. The DWARF
+ assembled-based one tests some hard-coded debug info based on what I
+ have observed some specific versions of gcc and clang generate. We want
+ to make sure that GDB keeps handling all these cases correctly, even if
+ it's not always clear whether they are really valid DWARF. Also, they
+ will be tested no matter what the current target compiler is for a given
+ test run.
+
+ The regular test is compiled using the target compiler, so it may help
+ find bugs when testing against some other toolchains than what was used
+ to generate the DWARF assembler-based test.
+
+ For the DWARF assembler-based test, add to testsuite/lib/dwarf.exp the
+ necessary code to generate a DWARF5 .debug_macro section. The design of
+ the new procs is based on what was done for rnglists and loclists.
+
+ To test against a specific compiler one can use this command, for
+ example:
+
+ $ make check TESTS="gdb.base/macro-source-path.exp" RUNTESTFLAGS="CC_FOR_TARGET=clang --target_board unix/gdb:debug_flags=-gdwarf-5"
+
+ Change-Id: Iab8da498e57d10cc2a3d09ea136685d9278cfcf6
+
+2022-07-30 Simon Marchi <simon.marchi@polymtl.ca>
+
+ gdb: remove code to prepend comp dir in buildsym_compunit::start_subfile
+ The bit of code removed by this patch was introduced to fix the same
+ kind of problem that the previous patch fixes. That is, to try to match
+ existing subfiles when different name forms are used to refer to a same
+ file.
+
+ The thread for the patch that introduced this code is:
+
+ https://pi.simark.ca/gdb-patches/45F8CBDF.9090501@hq.tensilica.com/
+
+ The important bits are that the compiler produced a compilation unit
+ with:
+
+ DW_AT_name : test.c
+ DW_AT_comp_dir : /home/maxim/W/BadgerPass/PR_14999
+
+ and DWARF v2 line table with:
+
+ The Directory Table:
+ /home/maxim/W/BadgerPass/PR_14999
+
+ The File Name Table:
+ Entry Dir Time Size Name
+ 1 1 1173897037 152 test.c
+
+ Because the main symtab was created with only DW_AT_name, it was named
+ "test.c". And because the path built from the line header contained the
+ "directory" part, it was "/home/maxim/W/BadgerPass/PR_14999/test.c".
+ Because of this mismatch, thing didn't work, so they added this code to
+ prepend the compilation directory to the existing subfile names, so that
+ this specific case would work.
+
+ With the changes done earlier in this series, where subfiles are
+ identified using the "most complete path possible", this case would be
+ handled. The main subfile's would be
+ "/home/maxim/W/BadgerPass/PR_14999/test.c" from the start
+ (DW_AT_comp_dir + DW_AT_name). It's not so different from some DWARF 5
+ cases actually, which make the compilation directory explicit in the
+ line table header.
+
+ I therefore think that this code is no longer needed. It does feel like
+ a quick hack to make one specific case work, and we have a more general
+ solution now. Also, this code was introduced to work around a problem
+ in the DWARF debug info or the DWARF debug info reader. In general, I
+ think it's preferable for these hacks to be located in the specific
+ debug info reader code, rather than in the common code.
+
+ Even though this code was added to work around a DWARF reader problem,
+ it's possible that some other debug info reader has started taking
+ advantage of this code in the mean time. It's very difficult to
+ know or verify, but I think the likelyhood is quite small, so I'm
+ proposing to get rid of it to simplify things a little bit.
+
+ Change-Id: I710b8ec0d449d1b110d67ddf9fcbdb2b37108306
+
+2022-07-30 Simon Marchi <simon.marchi@efficios.com>
+
+ gdb: add "id" fields to identify symtabs and subfiles
+ Printing macros defined in the main source file doesn't work reliably
+ using various toolchains, especially when DWARF 5 is used. For example,
+ using the binaries produced by either of these commands:
+
+ $ gcc --version
+ gcc (GCC) 11.2.0
+ $ ld --version
+ GNU ld (GNU Binutils) 2.38
+ $ gcc test.c -g3 -gdwarf-5
+
+ $ clang --version
+ clang version 13.0.1
+ $ clang test.c -gdwarf-5 -fdebug-macro
+
+ I get:
+
+ $ ./gdb -nx -q --data-directory=data-directory a.out
+ (gdb) start
+ Temporary breakpoint 1 at 0x111d: file test.c, line 6.
+ Starting program: /home/simark/build/binutils-gdb-one-target/gdb/a.out
+
+ Temporary breakpoint 1, main () at test.c:6
+ 6 return ZERO;
+ (gdb) p ZERO
+ No symbol "ZERO" in current context.
+
+ When starting to investigate this (taking the gcc-compiled binary as an
+ example), we see that GDB fails to look up the appropriate macro scope
+ when evaluating the expression. While stopped in
+ macro_lookup_inclusion:
+
+ (top-gdb) p name
+ $1 = 0x62100011a980 "test.c"
+ (top-gdb) p source.filename
+ $2 = 0x62100011a9a0 "/home/simark/build/binutils-gdb-one-target/gdb/test.c"
+
+ `source` is the macro_source_file that we would expect GDB to find.
+ `name` comes from the symtab::filename field of the symtab we are
+ stopped in. GDB doesn't find the appropriate macro_source_file because
+ the name of the macro_source_file doesn't match exactly the name of the
+ symtab.
+
+ The name of the main symtab comes from the compilation unit's
+ DW_AT_name, passed to the buildsym_compunit's constructor:
+
+ https://gitlab.com/gnutools/binutils-gdb/-/blob/4815d6125ec580cc02a1094d61b8c9d1cc83c0a1/gdb/dwarf2/read.c#L10627-10630
+
+ The contents of DW_AT_name, in this case, is "test.c". It is typically
+ (what I witnessed all compilers do) the same string that was passed to
+ the compiler on the command-line.
+
+ The name of the macro_source_file comes from the line number program
+ header's file table, from the call to the line_header::file_file_name
+ method:
+
+ https://gitlab.com/gnutools/binutils-gdb/-/blob/4815d6125ec580cc02a1094d61b8c9d1cc83c0a1/gdb/dwarf2/macro.c#L54-65
+
+ line_header::file_file_name prepends the directory path that the file
+ entry refers to, in the file table (if the file name is not already
+ absolute). In this case, the file name is "test.c", appended to the
+ directory "/home/simark/build/binutils-gdb-one-target/gdb".
+
+ Because the symtab's name is not created the same way as the
+ macro_source_file's name is created, we get this mismatch. GDB fails to
+ find the appropriate macro scope for the symtab, and we can't print
+ macros when stopped in that symtab.
+
+ To make this work, we must ensure that paths produced in these two ways
+ end up identical. This can be tricky because of the different ways a
+ path can be passed to the compiler by the user.
+
+ Another thing to consider is that while the main symtab's name (or
+ subfile, before it becomes a symtab) is created using DW_AT_name, the
+ main symtab is also referred to using its entry in the line table
+ header's file table, when processing the line table. We must therefore
+ ensure that the same name is produced in both cases, so that a call to
+ "start_subfile" for the main subfile will correctly find the
+ already-created subfile, created by buildsym_compunit's constructor. If
+ we fail to do that, things still often work, because of a fallback: the
+ watch_main_source_file_lossage method. This method determines that if
+ the main subfile has no symbols but there exists another subfile with
+ the same basename (e.g. "test.c") that does have symbols, it's probably
+ because there was some filename mismatch. So it replaces the main
+ subfile with that other subfile. I think that heuristic is useful as a
+ last effort to work around any bug or bad debug info, but I don't think
+ we should design things such as to rely on it. It's a heuristic, it can
+ get things wrong. So in my search for a fix, it is important that given
+ some good debug info, we don't end up relying on that for things to
+ work.
+
+ A first attempt at fixing this was to try to prepend the compilation
+ directory here or not prepend it there. In practice, because of all the
+ possible combinations of debug info the compilers produce, it was not
+ possible to get something that would produce reliable, consistent paths.
+
+ Another attempt at fixing this was to make both macro_source_file
+ objects and symtab objects use the most complete form of path possible.
+ That means to prepend directories at least until we get an absolute
+ path. In theory, we should end up with the same path in all cases.
+ This generally worked, but because it changed the symtab names, it
+ resulted in user-visible changes (for example, paths to source files in
+ Breakpoint hit messages becoming always absolute). I didn't find this
+ very good, first because there is a "set filename-display" setting that
+ lets the user control how they want the paths to be displayed, and that
+ would suddenly make this setting completely ineffective (although even
+ today, it is a bit dependent on the debug info). Second, it would
+ require a good amount of testsuite tweaks to make tests accept these
+ suddenly absolute paths.
+
+ This new patch is a slight variation of that: it adds a new field called
+ "filename_for_id" in struct symtab and struct subfile, next to the
+ existing filename field. The goal is to separate the internal ids used
+ for finding objects from the names used for presentation. This field is
+ used for identifying subfiles, symtabs and macro_source_files
+ internally. For DWARF symtabs, this new field is meant to contain the
+ "most complete possible" path, as discussed above. So for a given file,
+ it must always be in the same form, everywhere. The existing
+ symtab::filename field remains the one used for printing to the user, so
+ there shouldn't be any change in how paths are printed.
+
+ Changes in the core symtab files are:
+
+ - Add "name_for_id" and "filename_for_id" fields to "struct subfile"
+ and "struct symtab", next to existing "name" and "filename" fields.
+ - Make buildsym_compunit::buildsym_compunit and
+ buildsym_compunit::start_subfile accept a "name_for_id" parameter
+ next to the existing "name" ones.
+ - Make buildsym_compunit::start_subfile use "name_for_id" for looking
+ up existing subfiles. This is the key thing for making calls
+ to start_subfile for the main source file look up the existing
+ subfile successfully, and avoid relying on
+ watch_main_source_file_lossage.
+ - Make sal_macro_scope pass "filename_for_id", rather than "filename",
+ to macro_lookup_inclusion. This is the key thing to making the
+ lookup work and macro printing work.
+
+ Changes in the DWARF files are:
+
+ - Make line_header::file_file_name return the "most complete possible"
+ name. The only pre-existing user of this method is the macro code,
+ to give the macro_source_file objects their name. And we now want
+ them to have this "most complete possible" name, which will match the
+ corresponding symtab's "filename_for_id".
+ - Make dwarf2_cu::start_compunit_symtab pass the "most complete
+ possible" name for the main symtab's "filename_for_id". In this
+ context, where the info comes from the compilation unit's DW_AT_name
+ / DW_AT_comp_dir, it means prepending DW_AT_comp_dir to DW_AT_name if
+ DW_AT_name is not already absolute.
+ - Change dwarf2_start_subfile to build a name_for_id for the subfile
+ being started. The simplest way is to re-use
+ line_header::file_file_name, since the callers always have a
+ file_entry handy. This ensures that it will get the exact same path
+ representation as the macro code does, for the same file (since it
+ also uses line_header::file_file_name).
+ - Update calls to allocate_symtab to pass the "name_for_id" from the
+ subfile.
+
+ Tests exercising all this are added by the following patch.
+
+ Of all the cases I tried, the only one I found that ends up relying on
+ watch_main_source_file_lossage is the following one:
+
+ $ clang --version
+ clang version 13.0.1
+ Target: x86_64-pc-linux-gnu
+ Thread model: posix
+ InstalledDir: /usr/bin
+ $ clang ./test.c -g3 -O0 -gdwarf-4
+ $ ./gdb -nx --data-directory=data-directory -q -readnow -iex "set debug symtab-create 1" a.out
+ ...
+ [symtab-create] start_subfile: name = test.c, name_for_id = /home/simark/build/binutils-gdb-one-target/gdb/test.c
+ [symtab-create] start_subfile: name = ./test.c, name_for_id = /home/simark/build/binutils-gdb-one-target/gdb/./test.c
+ [symtab-create] start_subfile: name = ./test.c, name_for_id = /home/simark/build/binutils-gdb-one-target/gdb/./test.c
+ [symtab-create] start_subfile: found existing symtab with name_for_id /home/simark/build/binutils-gdb-one-target/gdb/./test.c (/home/simark/build/binutils-gdb-one-target/gdb/./test.c)
+ [symtab-create] watch_main_source_file_lossage: using subfile ./test.c as the main subfile
+
+ As we can see, there are two forms used for "test.c", one with a "." and
+ one without. This comes from the fact that the compilation unit DIE
+ contains:
+
+ DW_AT_name ("test.c")
+ DW_AT_comp_dir ("/home/simark/build/binutils-gdb-one-target/gdb")
+
+ without a ".", and the line table for that file contains:
+
+ include_directories[ 1] = "."
+ file_names[ 1]:
+ name: "test.c"
+ dir_index: 1
+
+ When assembling the filename from that entry, we get a ".".
+
+ It is a bit unexpected that the main filename resulting from the line
+ table header does not match exactly the name in the compilation unit.
+ For instance, gcc uses "./test.c" for the DW_AT_name, which gives
+ identical paths in the compilation unit and in the line table header.
+
+ Similarly, with DWARF 5:
+
+ $ clang ./test.c -g3 -O0 -gdwarf-5
+
+ clang create two entries that refer to the same file but are of in a different
+ form.
+
+ include_directories[ 0] = "/home/simark/build/binutils-gdb-one-target/gdb"
+ include_directories[ 1] = "."
+ file_names[ 0]:
+ name: "test.c"
+ dir_index: 0
+ file_names[ 1]:
+ name: "test.c"
+ dir_index: 1
+
+ The first file name produces a path without a "." while the second does.
+ This is not caught by watch_main_source_file_lossage, because of
+ dwarf_decode_lines that creates a symtab for each file entry in the line
+ table. It therefore appears as "non-empty" to
+ watch_main_source_file_lossage. This results in two symtabs:
+
+ (gdb) maintenance info symtabs
+ { objfile /home/simark/build/binutils-gdb-one-target/gdb/a.out ((struct objfile *) 0x613000005d00)
+ { ((struct compunit_symtab *) 0x62100011aca0)
+ debugformat DWARF 5
+ producer clang version 13.0.1
+ name test.c
+ dirname /home/simark/build/binutils-gdb-one-target/gdb
+ blockvector ((struct blockvector *) 0x621000129ec0)
+ user ((struct compunit_symtab *) (null))
+ { symtab test.c ((struct symtab *) 0x62100011ad20)
+ fullname (null)
+ linetable ((struct linetable *) 0x0)
+ }
+ { symtab ./test.c ((struct symtab *) 0x62100011ad60)
+ fullname (null)
+ linetable ((struct linetable *) 0x621000129ef0)
+ }
+ }
+ }
+
+ I am not sure what is the consequence of this, but this is also what
+ happens before my patch, so I think its acceptable to leave it as-is.
+
+ To handle these two cases nicely, I think we will need a function that
+ removes the unnecessary "." from path names, something that can be done
+ later.
+
+ Finally, I made a change in find_file_and_directory is necessary to
+ avoid breaking test
+
+ gdb.dwarf2/dw2-compdir-oldgcc.exp: info source gcc42
+
+ Without that change, we would get:
+
+ (gdb) info source
+ Current source file is /dir/d/dw2-compdir-oldgcc42.S
+ Compilation directory is /dir/d
+
+ whereas the expected result is:
+
+ (gdb) info source
+ Current source file is dw2-compdir-oldgcc42.S
+ Compilation directory is /dir/d
+
+ This test was added here:
+
+ https://sourceware.org/pipermail/gdb-patches/2012-November/098144.html
+
+ Long story short, GCC <= 4.2 apparently had a bug where it would
+ generate a DW_AT_name with a full path ("/dir/d/dw2-compdir-oldgcc42.S")
+ and no DW_AT_comp_dir. The line table has one entry with filename
+ "dw2-compdir-oldgcc42.S", which refers to directory 0. Directory 0
+ normally refers to the compilation unit's comp dir, but it is
+ non-existent in this case.
+
+ This caused some symtab lookup problems, and to work around them, some
+ workaround was added, which today reads as:
+
+ if (res.get_comp_dir () == nullptr
+ && producer_is_gcc_lt_4_3 (cu)
+ && res.get_name () != nullptr
+ && IS_ABSOLUTE_PATH (res.get_name ()))
+ res.set_comp_dir (ldirname (res.get_name ()));
+
+ Source: https://gitlab.com/gnutools/binutils-gdb/-/blob/6577f365ebdee7dda71cb996efa29d3714cbccd0/gdb/dwarf2/read.c#L9428-9432
+
+ It extracts an artificial DW_AT_comp_dir from DW_AT_name, if there is no
+ DW_AT_comp_dir and DW_AT_name is absolute.
+
+ Prior to my patch, a subfile would get created with filename
+ "/dir/d/dw2-compdir-oldgcc42.S", from DW_AT_name, and another would get
+ created with filename "dw2-compdir-oldgcc42.S" from the line table's
+ file table. Then watch_main_source_file_lossage would kick in and merge
+ them, keeping only the "dw2-compdir-oldgcc42.S" one:
+
+ [symtab-create] start_subfile: name = /dir/d/dw2-compdir-oldgcc42.S
+ [symtab-create] start_subfile: name = dw2-compdir-oldgcc42.S
+ [symtab-create] start_subfile: name = dw2-compdir-oldgcc42.S
+ [symtab-create] start_subfile: found existing symtab with name dw2-compdir-oldgcc42.S (dw2-compdir-oldgcc42.S)
+ [symtab-create] watch_main_source_file_lossage: using subfile dw2-compdir-oldgcc42.S as the main subfile
+
+ And so "info source" would show "dw2-compdir-oldgcc42.S" as the
+ filename.
+
+ With my patch applied, but without the change in
+ find_file_and_directory, both DW_AT_name and the line table would try to
+ start a subfile with the same filename_for_id, and there was no need for
+ watch_main_source_file_lossage - which is what we want:
+
+ [symtab-create] start_subfile: name = /dir/d/dw2-compdir-oldgcc42.S, name_for_id = /dir/d/dw2-compdir-oldgcc42.S
+ [symtab-create] start_subfile: name = dw2-compdir-oldgcc42.S, name_for_id = /dir/d/dw2-compdir-oldgcc42.S
+ [symtab-create] start_subfile: found existing symtab with name_for_id /dir/d/dw2-compdir-oldgcc42.S (/dir/d/dw2-compdir-oldgcc42.S)
+ [symtab-create] start_subfile: name = dw2-compdir-oldgcc42.S, name_for_id = /dir/d/dw2-compdir-oldgcc42.S
+ [symtab-create] start_subfile: found existing symtab with name_for_id /dir/d/dw2-compdir-oldgcc42.S (/dir/d/dw2-compdir-oldgcc42.S)
+
+ But since the one with name == "/dir/d/dw2-compdir-oldgcc42.S", coming
+ from DW_AT_name, gets created first, it wins, and the symtab ends up
+ with "/dir/d/dw2-compdir-oldgcc42.S" as the name, "info source" shows
+ "/dir/d/dw2-compdir-oldgcc42.S" and the test breaks.
+
+ This is not wrong per-se, after all DW_AT_name is
+ "/dir/d/dw2-compdir-oldgcc42.S", so it wouldn't be wrong to report the
+ current source file as "/dir/d/dw2-compdir-oldgcc42.S". If you compile
+ a file passing "/an/absolute/path.c", DW_AT_name typically contains (at
+ least with GCC) "/an/absolute/path.c" and GDB tells you that the source
+ file is "/an/absolute/path.c". But we can also keep the existing
+ behavior fairly easily with a little change in find_file_and_directory.
+ When extracting an artificial DW_AT_comp_dir from DW_AT_name, we now
+ modify the name to just keep the file part. The result is coherent with
+ what compilers do when you compile a file by just passing its filename
+ ("gcc path.c -g"):
+
+ DW_AT_name ("path.c")
+ DW_AT_comp_dir ("/home/simark/build/binutils-gdb-one-target/gdb")
+
+ With this change, filename_for_id is still the full name,
+ "/dir/d/dw2-compdir-oldgcc42.S", but the filename of the subfile /
+ symtab (what ends up shown by "info source") is just
+ "dw2-compdir-oldgcc42.S", and that makes the test happy.
+
+ Change-Id: I8b5cc4bb3052afdb172ee815c051187290566307
+
+2022-07-30 Simon Marchi <simon.marchi@polymtl.ca>
+
+ gdb/dwarf: pass a file_entry to line_header::file_file_name
+ In the following patch, there will be some callers of file_file_name
+ that will already have access to the file_entry object for which they
+ want the file name. It would be inefficient to have them pass an index,
+ only for line_header::file_file_name to re-lookup the same file_entry
+ object. Change line_header::file_file_name to accept a file_entry
+ object reference, instead of an index to look up.
+
+ I think this change makes sense in any case. Callers that have an index
+ can first obtain a file_entry using line_header::file_name_at or
+ line_header::file_names.
+
+ When passing a file_entry object, we can assume that the file_entry's
+ index is valid, unlike when passing an index. So, push the special case
+ about an invalid index to the sole current caller of file_file_name,
+ macro_start_file. I think that error belongs there anyway, since it
+ specifically talks about "bad file number in macro information".
+
+ This requires recording the file index in the file_entry structure, so
+ add that.
+
+ Change-Id: Ic6e44c407539d92b7863d7ba82405ade17f384ad
+
+2022-07-30 Simon Marchi <simon.marchi@polymtl.ca>
+
+ gdb/dwarf: pass compilation directory to line header
+ The following patch changes line_header::file_file_name to prepend the
+ compilation directory to the file name, if needed. For that, the line
+ header needs to know about the compilation directory. Prepare for that
+ by adding a constructor that takes it as a parameter, and passing the
+ value down everywhere needed. Add a second constructor for the special
+ case of building a line_header for doing a hash table lookup, since that
+ case doesn't require a compilation directory value.
+
+ Change-Id: Iba3ba0293e4e2d13a64b257cf9a3094684d54330
+
+2022-07-30 Simon Marchi <simon.marchi@polymtl.ca>
+
+ gdb: add debug prints in buildsym.c
+ Add a few debug prints in buildsym.c that were helpful to me in writing
+ this series.
+
+ Change-Id: If10a818feaee3ce1b78a2a254013b62dd578002b
+
+2022-07-30 Simon Marchi <simon.marchi@polymtl.ca>
+
+ gdb: introduce symtab_create_debug_printf
+ Introduce symtab_create_debug_printf and symtab_create_debug_printf_v,
+ to print the debug messages enabled by "set debug symtab-create".
+
+ Change-Id: I442500903f72d4635c2dd9eaef770111f317dc04
+
+2022-07-30 GDB Administrator <gdbadmin@sourceware.org>
+
+ Automatic date update in version.in
+
+2022-07-29 Tom de Vries <tdevries@suse.de>
+
+ [gdb/testsuite] Fix gdb.ada/convvar_comp.exp with broken debug info
+ On aarch64-linux I run into this failure with gcc 7.5.0:
+ ...
+ (gdb) print $item.started^M
+ $1 = (-5312, 65535, 4202476)^M
+ (gdb) FAIL: gdb.ada/convvar_comp.exp: print $item.started
+ ...
+
+ The test-case expects (0, 0, 0), but we're getting another value due to
+ incorrect location information.
+
+ Work around this by:
+ - first printing the value, and then
+ - verifying that the convenience variable matches the printed value.
+
+ I've verified that the test-case still checks what it should by disabling
+ the fix from commit cc0e770c0d0 ("memory error printing component of record
+ from convenience variable") and observing the test-case fail.
+
+ Tested on x86_64-linux and aarch64-linux.
+
+ Bug: https://sourceware.org/bugzilla/show_bug.cgi?id=29420
+
+2022-07-29 Alan Modra <amodra@gmail.com>
+
+ Re: PR16005, avr linker crash on a particular instruction sequence with --relax
+ The last patch wasn't so clever. The contents in fact have already
+ been read, just not cached where relax_delete_bytes expects them.
+ relax_delete_bytes also modifies relocs and syms, so they should be
+ cached too.
+
+ PR 16005
+ * elf32-avr.c (elf32_avr_relax_delete_bytes): Revert last change.
+ (elf32_avr_relax_section): Cache contents, relocs and syms
+ before calling relax_delete_bytes.
+
+2022-07-29 Andrew Burgess <aburgess@redhat.com>
+
+ libopcodes/aarch64: add support for disassembler styling
+ This commit enables disassembler styling for AArch64. After this
+ commit it is possible to have objdump style AArch64 disassembler
+ output (using --disassembler-color option). Once the required GDB
+ patches are merged, GDB will also style the disassembler output.
+
+ The changes to support styling are mostly split between two files
+ opcodes/aarch64-dis.c and opcodes/aarch64-opc.c.
+
+ The entry point for the AArch64 disassembler can be found in
+ aarch64-dis.c, this file handles printing the instruction mnemonics,
+ and assembler directives (e.g. '.byte', '.word', etc). Some operands,
+ mostly relating to assembler directives are also printed from this
+ file. This commit changes all of this to pass through suitable
+ styling information.
+
+ However, for most "normal" instructions, the instruction operands are
+ printed using a two step process. From aarch64-dis.c, in the
+ print_operands function, the function aarch64_print_operand is called,
+ this function is in aarch64-opc.c, and converts an instruction operand
+ into a string. Then, back in print_operands (aarch64-dis.c), the
+ operand string is printed.
+
+ Unfortunately, the string returned by aarch64_print_operand can be
+ quite complex, it will include syntax elements, like '[' and ']', in
+ addition to register names and immediate values. In some cases, a
+ single operand will expand into what will appear (to the user) as
+ multiple operands separated with a ','.
+
+ This makes the task of styling more complex, all these different
+ components need to by styled differently, so we need to get the
+ styling information out of aarch64_print_operand in some way.
+
+ The solution that I propose here is similar to the solution that I
+ used for the i386 disassembler.
+
+ Currently, aarch64_print_operand uses snprintf to write the operand
+ text into a buffer provided by the caller.
+
+ What I propose is that we pass an extra argument to the
+ aarch64_print_operand function, this argument will be a structure, the
+ structure contains a callback function and some state.
+
+ When aarch64_print_operand needs to format part of its output this can
+ be done by using the callback function within the new structure, this
+ callback returns a string with special embedded markers that indicate
+ which mode should be used for each piece of text. Back in
+ aarch64-dis.c we can spot these special style markers and use this to
+ split the disassembler output up and apply the correct style to each
+ piece.
+
+ To make aarch64-opc.c clearer a series of new static functions have
+ been added, e.g. 'style_reg', 'style_imm', etc. Each of these
+ functions formats a piece of text in a different style, 'register' and
+ 'immediate' in this case.
+
+ Here's an example taken from aarch64-opc.c of the new functions in
+ use:
+
+ snprintf (buf, size, "[%s, %s]!",
+ style_reg (styler, base),
+ style_imm (styler, "#%d", opnd->addr.offset.imm));
+
+ The aarch64_print_operand function is also called from the assembler
+ to aid in printing diagnostic messages. Right now I have no plans to
+ add styling to the assembler output, and so, the callback function
+ used in the assembler ignores the styling information and just returns
+ an plain string.
+
+ I've used the source files in gas/testsuite/gas/aarch64/ for testing,
+ and have manually gone through and checked that the styling looks
+ reasonable, however, I'm not an AArch64 expert, so it is possible that
+ the odd piece is styled incorrectly. Please point out any mistakes
+ I've made.
+
+ With objdump disassembler color turned off, there should be no change
+ in the output after this commit.
+
+2022-07-29 Nick Clifton <nickc@redhat.com>
+
+ Stop the linker from complaining about unrecognised DW_FORM-rnglistx and DW_FORM_loclistx format attributes.
+ PR 29424
+ * dwarf2.c (read_attribute_value): Handle DW_FORM_rnglistx and
+ DW_FORM_loclistx.
+
+2022-07-29 Alan Modra <amodra@gmail.com>
+
+ PR16005, avr linker crash on a particular instruction sequence with --relax
+ It's possible for relax_delete_bytes to be called with section
+ contents NULL, as demonstrated by the testcase in this PR.
+
+ PR 16005
+ * elf32-avr.c (elf32_avr_relax_delete_bytes): Get section contents
+ if not already available.
+
+2022-07-29 Jan Beulich <jbeulich@suse.com>
+
+ x86: drop stray NoRex64 from KeyLocker insns
+ It's entirely unclear why some of the KeyLocker insns had NoRex64 on
+ them - there's nothing here which could cause emission of REX.W (except
+ of course a user-specified "rex.w", which we ought to honor anyway).
+
+2022-07-29 Jan Beulich <jbeulich@suse.com>
+
+ Arm64: re-work PR gas/27217 fix
+ The original approach has resulted in anomalies when . is involved in an
+ operand of one of the affected insns. We cannot leave . unresolved, or
+ else it'll be resolved at the end of assembly, then pointing to the
+ address of a section rather than at the insn of interest. Undo part of
+ the original change and instead check whether a relocation cannot be
+ omitted in md_apply_fix().
+
+ By resolving the expressions again, equates (see the adjustment of the
+ respective testcase) will now be evaluated, and hence relocations
+ against absolute addresses be emitted. This ought to be okay as long as
+ the equates aren't global (and hence can't be overridden). If a need
+ for such arises, quite likely the only way to address this would be to
+ invent yet another expression evaluation mode, leaving everything
+ _except_ . un-evaluated.
+
+ There's a further anomaly in how transitive equates are handled. In
+
+ .set x, 0x12345678
+ .eqv bar, x
+ foo:
+ adrp x0, x
+ add x0, x0, :lo12:x
+
+ adrp x0, bar
+ add x0, x0, :lo12:bar
+
+ the first two relocations are now against *ABS*:0x12345678 (as said
+ above), whereas the latter two relocations would be against x. (Before
+ the change here, the first two relocations are against x and the latter
+ two against bar.) But this is an issue seen elsewhere as well, and would
+ likely require adjustments in the target-independent parts of the
+ assembler instead of trying to hack around this for every target.
+
+2022-07-29 Rainer Orth <ro@CeBiTec.Uni-Bielefeld.DE>
+
+ ld: Extend ac_default_ld_warn_rwx_segments to all SPARC targets [PR29411]
+ As discussed in PR ld/29411, the ld warning
+
+ [...] has a LOAD segment with RWX permissions
+
+ needs to be disabled on all SPARC targets, not just Solaris/SPARC: the
+ .plt section is required to be RWX by the 32-bit SPARC ELF psABI and the
+ 64-bit SPARC Compliance Definition 2.4.1. Given that ld only supports
+ SPARC ELF targets, this patch implements this.
+
+ Tested on sparc64-unknown-linux-gnu and sparc-sun-solaris2.11.
+
+ 2022-07-28 Rainer Orth <ro@CeBiTec.Uni-Bielefeld.DE>
+
+ ld:
+ PR ld/29411
+ * configure.tgt (ac_default_ld_warn_rwx_segments): Extend to all
+ sparc targets. Expand comment.
+
+2022-07-29 Tom de Vries <tdevries@suse.de>
+
+ [gdb/testsuite] Fix gdb.threads/killed-outside.exp on aarch64
+ On aarch64 (and likewise on arm), I run into:
+ ...
+ (gdb) PASS: gdb.threads/killed-outside.exp: get pid of inferior
+ Executing on target: kill -9 11516 (timeout = 300)
+ builtin_spawn -ignore SIGHUP kill -9 11516^M
+ continue^M
+ Continuing.^M
+ Unable to fetch general registers: No such process.^M
+ (gdb) [Thread 0xfffff7d511e0 (LWP 11518) exited]^M
+ ^M
+ Program terminated with signal SIGKILL, Killed.^M
+ The program no longer exists.^M
+ FAIL: gdb.threads/killed-outside.exp: prompt after first continue (timeout)
+ ...
+ due to a mismatch between the actual "No such process" line and the expected
+ one:
+ ...
+ set no_such_process_msg "Couldn't get registers: No such process\."
+ ...
+
+ Fix this by updating the regexp.
+
+ Tested on aarch64-linux, and x86_64-linux.
+
+2022-07-29 Tsukasa OI <research_trasio@irq.a4lg.com>
+
+ RISC-V: Add `OP_V' to .insn named opcodes
+ This commit adds `OP_V' (OP-V: vector instruction opcode for now
+ ratified `V' extension) to .insn opcode name list. Although vector
+ instruction encoding is not implemented in `.insn' directive, it will
+ help future implementation of custom vector `.insn'.
+
+ gas/ChangeLog:
+
+ * config/tc-riscv.c (opcode_name_list): Add `OP_V'.
+ * testsuite/gas/riscv/insn.s: Add testcase.
+ * testsuite/gas/riscv/insn.d: Likewise.
+ * testsuite/gas/riscv/insn-dwarf.d: Reflect insn.s update.
+
+2022-07-29 GDB Administrator <gdbadmin@sourceware.org>
+
+ Automatic date update in version.in
+
+2022-07-28 Tom Tromey <tom@tromey.com>
+
+ Remove some unneeded checks in Guile code
+ The Guile code generally checks to see if an htab is non-null before
+ destroying it. However, the registry code already ensures this, so we
+ can change these checks to asserts and simplify the code a little.
+
+ Change registry to use less memory
+ The registry code creates "registry_data" objects that hold the free
+ function and the index; then the registry keys refer to this object.
+ However, only the index is really useful, and now that registries have
+ a private implementation, just the index can be stored and we can
+ reduce the memory use of registries a little bit. This also
+ simplifies the code somewhat.
+
+2022-07-28 Tom Tromey <tom@tromey.com>
+
+ Rewrite registry.h
+ This rewrites registry.h, removing all the macros and replacing it
+ with relatively ordinary template classes. The result is less code
+ than the previous setup. It replaces large macros with a relatively
+ straightforward C++ class, and now manages its own cleanup.
+
+ The existing type-safe "key" class is replaced with the equivalent
+ template class. This approach ended up requiring relatively few
+ changes to the users of the registry code in gdb -- code using the key
+ system just required a small change to the key's declaration.
+
+ All existing users of the old C-like API are now converted to use the
+ type-safe API. This mostly involved changing explicit deletion
+ functions to be an operator() in a deleter class.
+
+ The old "save/free" two-phase process is removed, and replaced with a
+ single "free" phase. No existing code used both phases.
+
+ The old "free" callbacks took a parameter for the enclosing container
+ object. However, this wasn't truly needed and is removed here as
+ well.
+
+2022-07-28 Tom Tromey <tom@tromey.com>
+
+ Remove some unused functions from guile code
+ The guile code has a couple of unused functions that touch on the
+ registry API. This patch removes them.
+
+2022-07-28 Tom Tromey <tom@tromey.com>
+
+ Change allocation of type-copying hash table
+ When an objfile is destroyed, types that are still in use and
+ allocated on that objfile are copied. A temporary hash map is created
+ during this process, and it is allocated on the destroyed objfile's
+ obstack -- which normally is fine, as that is going to be destroyed
+ shortly anyway.
+
+ However, this approach requires that the objfile be passed to registry
+ destruction, and this won't be possible in the rewritten registry.
+ This patch changes the copied type hash table to simply use the heap
+ instead. It also removes the 'objfile' parameter from
+ copy_type_recursive, to make this all more clear.
+
+ This patch also fixes an apparent bug in copy_type_recursive.
+ Previously it was copying the dynamic property list to the dying
+ objfile's obstack:
+
+ - = copy_dynamic_prop_list (&objfile->objfile_obstack,
+
+ However I think this is incorrect -- that obstack is about to be
+ destroyed.
+
+2022-07-28 Tom Tromey <tom@tromey.com>
+
+ Change address_space to use new and delete
+ This changes address_space to use new and delete, and makes some other
+ small C++-ification changes as well, like changing address_space_num
+ to be a method.
+
+ This patch was needed for the subsequent patch to rewrite the registry
+ system.
+
+2022-07-28 Simon Farre <simon.farre.cx@gmail.com>
+
+ gdb/python: Add BreakpointLocation type
+ PR python/18385
+
+ v7:
+ This version addresses the issues pointed out by Tom.
+
+ Added nullchecks for Python object creations.
+
+ Changed from using PyLong_FromLong to the gdb_py-versions.
+
+ Re-factored some code to make it look more cohesive.
+
+ Also added the more safe Python reference count decrement PY_XDECREF,
+ even though the BreakpointLocation type is never instantiated by the
+ user (explicitly documented in the docs) decrementing < 0 is made
+ impossible with the safe call.
+
+ Tom pointed out that using the policy class explicitly to decrement a
+ reference counted object was not the way to go, so this has instead been
+ wrapped in a ref_ptr that handles that for us in blocpy_dealloc.
+
+ Moved macro from py-internal to py-breakpoint.c.
+
+ Renamed section at the bottom of commit message "Patch Description".
+
+ v6:
+ This version addresses the points Pedro gave in review to this patch.
+
+ Added the attributes `function`, `fullname` and `thread_groups`
+ as per request by Pedro with the argument that it more resembles the
+ output of the MI-command "-break-list". Added documentation for these attributes.
+
+ Cleaned up left overs from copy+paste in test suite, removed hard coding
+ of line numbers where possible.
+
+ Refactored some code to use more c++-y style range for loops
+ wrt to breakpoint locations.
+
+ Changed terminology, naming was very inconsistent. Used a variety of "parent",
+ "owner". Now "owner" is the only term used, and the field in the
+ gdb_breakpoint_location_object now also called "owner".
+
+ v5:
+
+ Changes in response to review by Tom Tromey:
+ - Replaced manual INCREF/DECREF calls with
+ gdbpy_ref ptrs in places where possible.
+ - Fixed non-gdb style conforming formatting
+ - Get parent of bploc increases ref count of parent.
+ - moved bploc Python definition to py-breakpoint.c
+
+ The INCREF of self in bppy_get_locations is due
+ to the individual locations holding a reference to
+ it's owner. This is decremented at de-alloc time.
+
+ The reason why this needs to be here is, if the user writes
+ for instance;
+
+ py loc = gdb.breakpoints()[X].locations[Y]
+
+ The breakpoint owner object is immediately going
+ out of scope (GC'd/dealloced), and the location
+ object requires it to be alive for as long as it is alive.
+
+ Thanks for your review, Tom!
+
+ v4:
+ Fixed remaining doc issues as per request
+ by Eli.
+
+ v3:
+ Rewritten commit message, shortened + reworded,
+ added tests.
+
+ Patch Description
+
+ Currently, the Python API lacks the ability to
+ query breakpoints for their installed locations,
+ and subsequently, can't query any information about them, or
+ enable/disable individual locations.
+
+ This patch solves this by adding Python type gdb.BreakpointLocation.
+ The type is never instantiated by the user of the Python API directly,
+ but is produced by the gdb.Breakpoint.locations attribute returning
+ a list of gdb.BreakpointLocation.
+
+ gdb.Breakpoint.locations:
+ The attribute for retrieving the currently installed breakpoint
+ locations for gdb.Breakpoint. Matches behavior of
+ the "info breakpoints" command in that it only
+ returns the last known or currently inserted breakpoint locations.
+
+ BreakpointLocation contains 7 attributes
+
+ 6 read-only attributes:
+ owner: location owner's Python companion object
+ source: file path and line number tuple: (string, long) / None
+ address: installed address of the location
+ function: function name where location was set
+ fullname: fullname where location was set
+ thread_groups: thread groups (inferiors) where location was set.
+
+ 1 writeable attribute:
+ enabled: get/set enable/disable this location (bool)
+
+ Access/calls to these, can all throw Python exceptions (documented in
+ the online documentation), and that's due to the nature
+ of how breakpoint locations can be invalidated
+ "behind the scenes", either by them being removed
+ from the original breakpoint or changed,
+ like for instance when a new symbol file is loaded, at
+ which point all breakpoint locations are re-created by GDB.
+ Therefore this patch has chosen to be non-intrusive:
+ it's up to the Python user to re-request the locations if
+ they become invalid.
+
+ Also there's event handlers that handle new object files etc, if a Python
+ user is storing breakpoint locations in some larger state they've
+ built up, refreshing the locations is easy and it only comes
+ with runtime overhead when the Python user wants to use them.
+
+ gdb.BreakpointLocation Python type
+ struct "gdbpy_breakpoint_location_object" is found in python-internal.h
+
+ Its definition, layout, methods and functions
+ are found in the same file as gdb.Breakpoint (py-breakpoint.c)
+
+ 1 change was also made to breakpoint.h/c to make it possible
+ to enable and disable a bp_location* specifically,
+ without having its LOC_NUM, as this number
+ also can change arbitrarily behind the scenes.
+
+ Updated docs & news file as per request.
+
+ Testsuite: tests the .source attribute and the disabling of
+ individual locations.
+
+ Bug: https://sourceware.org/bugzilla/show_bug.cgi?id=18385
+
+
+ Change-Id: I302c1c50a557ad59d5d18c88ca19014731d736b0
+
+2022-07-28 yaowenbin <yaowenbin1@huawei.com>
+
+ gdb/gdb_mbuild.sh: use return instead of continue to avoid shellcheck error
+ Fix:
+
+ In gdb_mbuild.sh line 174:
+ continue
+ ^------^ SC2104 (error): In functions, use return instead of continue.
+
+ Change-Id: I5ce95b01359c5cfbb1612f2f48b80bfeea66c96c
+
+2022-07-28 GDB Administrator <gdbadmin@sourceware.org>
+
+ Automatic date update in version.in
+
+2022-07-27 GDB Administrator <gdbadmin@sourceware.org>
+
+ Automatic date update in version.in
+
+2022-07-27 Vladimir Mezentsev <vladimir.mezentsev@oracle.com>
+
+ gprofng: check for the makeinfo version
+ gprofng/ChangeLog
+ 2022-07-25 Vladimir Mezentsev <vladimir.mezentsev@oracle.com>
+
+ PR gprofng/29368
+ * configure.ac: Check for the makeinfo version.
+ * configure: Rebuild.
+
+2022-07-26 Keith Seitz <keiths@redhat.com>
+
+ gdb/linux_nat: Write memory using ptrace if /proc/pid/mem is not writable
+ Commit 05c06f318fd9a112529dfc313e6512b399a645e4 enabled GDB to access
+ memory while threads are running. It did this by accessing
+ /proc/PID/task/LWP/mem.
+
+ Unfortunately, this interface is not implemented for writing in older
+ kernels (such as RHEL6). This means that GDB is unable to insert
+ breakpoints on these hosts:
+
+ $ ./gdb -q gdb -ex start
+ Reading symbols from gdb...
+ Temporary breakpoint 1 at 0x40fdd5: file ../../src/gdb/gdb.c, line 28.
+ Starting program: /home/rhel6/fsf/linux/gdb/gdb
+ Warning:
+ Cannot insert breakpoint 1.
+ Cannot access memory at address 0x40fdd5
+
+ (gdb)
+
+ Before this patch, linux_proc_xfer_memory_partial (previously called
+ linux_proc_xfer_partial) would return TARGET_XFER_EOF if the write to
+ /proc/PID/mem failed. [More specifically, linux_proc_xfer_partial
+ would not "bother for one word," but the effect is the essentially
+ same.]
+
+ This status was checked by linux_nat_target::xfer_partial, which would
+ then fallback to using ptrace to perform the operation.
+
+ This is the specific hunk that removed the fallback:
+
+ - xfer = linux_proc_xfer_partial (object, annex, readbuf, writebuf,
+ - offset, len, xfered_len);
+ - if (xfer != TARGET_XFER_EOF)
+ - return xfer;
+ + return linux_proc_xfer_memory_partial (readbuf, writebuf,
+ + offset, len, xfered_len);
+ + }
+
+ return inf_ptrace_target::xfer_partial (object, annex, readbuf, writebuf,
+ offset, len, xfered_len);
+
+ This patch makes linux_nat_target::xfer_partial go straight to writing
+ memory via ptrace if writing via /proc/pid/mem is not possible in the
+ running kernel, enabling GDB to insert breakpoints on these older
+ kernels. Note that a recent patch changed the return status from
+ TARGET_XFER_EOF to TARGET_XFER_E_IO.
+
+ Tested on {unix,native-gdbserver,native-extended-gdbserver}/-m{32,64}
+ on x86_64, s390x, aarch64, and ppc64le.
+
+ Change-Id: If1d884278e8c4ea71d8836bedd56e6a6c242a415
+
+2022-07-26 Pedro Alves <pedro@palves.net>
+
+ gdb/linux-nat: Check whether /proc/pid/mem is writable
+ Probe whether /proc/pid/mem is writable, by using it to write to a GDB
+ variable. This will be used in the following patch to avoid falling
+ back to writing to inferior memory with ptrace if /proc/pid/mem _is_
+ writable.
+
+ Change-Id: If87eff0b46cbe5e32a583e2977a9e17d29d0ed3e
+
+2022-07-26 Tiezhu Yang <yangtiezhu@loongson.cn>
+
+ gdb: LoongArch: Handle the function return value
+ According to LoongArch ELF ABI specification [1], handle the function
+ return value of various types.
+
+ [1] https://loongson.github.io/LoongArch-Documentation/LoongArch-ELF-ABI-EN.html#_return_values
+
+2022-07-26 Tiezhu Yang <yangtiezhu@loongson.cn>
+
+ gdb: LoongArch: Fix code style issues
+ Fix some code style issues suggested by Tom Tromey and Andrew Burgess,
+ thank you.
+
+ (1) Put an introductory comment to explain the purpose for some functions.
+
+ (2) Modify the the attribute code to make it portable.
+
+ (3) Remove globals and pass pointers to locals.
+
+ (4) Remove "*" in the subsequent comment lines.
+
+ (5) Put two spaces before "{" and "}".
+
+2022-07-26 Nick Clifton <nickc@redhat.com>
+
+ Stop the linker from complaining about RWX segments in sparc-solaris targets.
+ PR 29411
+ * configure.tgt (ac_default_ld_warn_rwx_segments): Disable for
+ sparc-solaris configurations.
+
+2022-07-26 Tom de Vries <tdevries@suse.de>
+
+ [gdb/testsuite] Fix gdb.opt/inline-small-func.exp with clang
+ When running test-case gdb.opt/inline-small-func.exp with clang 12.0.1, I run
+ into:
+ ...
+ gdb compile failed, /usr/bin/ld: inline-small-func0.o: in function `main':
+ inline-small-func.c:21: undefined reference to `callee'
+ clang-12.0: error: linker command failed with exit code 1 \
+ (use -v to see invocation)
+ UNTESTED: gdb.opt/inline-small-func.exp: failed to prepare
+ ...
+
+ Fix this by using __attribute__((always_inline)).
+
+ Tested on x86_64-linux.
+
+2022-07-26 Alan Modra <amodra@gmail.com>
+
+ PowerPC32 ld test fails with --enable-targets=all
+ Three pppc32 ld tests fail when spe support is included in the linker
+ due to this snippet in ld/emulparams/elf32ppc.sh.
+
+ if grep -q 'ld_elf32_spu_emulation' ldemul-list.h; then
+ DATA_START_SYMBOLS="${RELOCATING+*crt1.o(.data .data.* .gnu.linkonce.d.*)
+ PROVIDE (__spe_handle = .);
+ *(.data.spehandle)
+ . += 4 * (DEFINED (__spe_handle) || . != 0);}"
+ fi
+
+ * testsuite/ld-powerpc/tlsexe32.r: Pass with .data section present.
+ * testsuite/ld-powerpc/tlsexe32no.r: Likewise.
+ * testsuite/ld-powerpc/tlsso32.r: Likewise.
+
+2022-07-26 Enze Li <enze.li@hotmail.com>
+
+ gdb/hurd: pass memory_tagged as false to find_memory_region_ftype
+ I tried building GDB on GNU/Hurd, and ran into this error:
+
+ CXX gnu-nat.o
+ gnu-nat.c: In member function ‘virtual int gnu_nat_target::find_memory_regions(find_memory_region_ftype, void*)’:
+ gnu-nat.c:2620:21: error: too few arguments to function
+ 2620 | (*func) (last_region_address,
+ | ~~~~~~~~^~~~~~~~~~~~~~~~~~~~~
+ 2621 | last_region_end - last_region_address,
+ | ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+ 2622 | last_protection & VM_PROT_READ,
+ | ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+ 2623 | last_protection & VM_PROT_WRITE,
+ | ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+ 2624 | last_protection & VM_PROT_EXECUTE,
+ | ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+ 2625 | 1, /* MODIFIED is unknown, pass it as true. */
+ | ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+ 2626 | data);
+ | ~~~~~
+ gnu-nat.c:2635:13: error: too few arguments to function
+ 2635 | (*func) (last_region_address, last_region_end - last_region_address,
+ | ~~~~~~~~^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+ 2636 | last_protection & VM_PROT_READ,
+ | ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+ 2637 | last_protection & VM_PROT_WRITE,
+ | ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+ 2638 | last_protection & VM_PROT_EXECUTE,
+ | ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+ 2639 | 1, /* MODIFIED is unknown, pass it as true. */
+ | ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+ 2640 | data);
+ | ~~~~~
+ make[2]: *** [Makefile:1926: gnu-nat.o] Error 1
+
+ This is because in this commit:
+
+ commit 68cffbbd4406b4efe1aa6e18460b1d7ca02549f1
+ Date: Thu Mar 31 11:42:35 2022 +0100
+
+ [AArch64] MTE corefile support
+
+ Added a new argument to find_memory_region_ftype, but did not pass it to
+ the function in gnu-nat.c. Fix this by passing memory_tagged as false.
+
+ As Luis pointed out, similar bugs may also appear on FreeBSD and NetBSD,
+ and I have reproduced them on both systems. This patch fixes them
+ incidentally.
+
+ Tested by rebuilding on GNU/Hurd, FreeBSD/amd64 and NetBSD/amd64.
+
+2022-07-26 Enze Li <enze.li@hotmail.com>
+
+ gdb/netbsd: add missing header file
+ I ran into this error when building GDB on NetBSD:
+
+ CXX netbsd-nat.o
+ netbsd-nat.c: In member function 'virtual bool nbsd_nat_target::info_proc(const char*, info_proc_what)':
+ netbsd-nat.c:314:3: error: 'gdb_argv' was not declared in this scope
+ gdb_argv built_argv (args);
+ ^~~~~~~~
+ netbsd-nat.c:314:3: note: suggested alternative: 'gdbarch'
+ gdb_argv built_argv (args);
+ ^~~~~~~~
+ gdbarch
+ netbsd-nat.c:315:7: error: 'built_argv' was not declared in this scope
+ if (built_argv.count () == 0)
+ ^~~~~~~~~~
+ netbsd-nat.c:315:7: note: suggested alternative: 'buildargv'
+ if (built_argv.count () == 0)
+ ^~~~~~~~~~
+ buildargv
+ gmake[2]: *** [Makefile:1893: netbsd-nat.o] Error 1
+
+ Fix this by adding the missing header file, as it is obvious.
+
+ Tested by rebuilding on NetBSD/amd64.
+
+2022-07-26 Nick Clifton <nickc@redhat.com>
+
+ Updated translations for various sub-directories
+
+2022-07-26 Andrew Burgess <aburgess@redhat.com>
+
+ gdb: rename gdbarch_tdep struct to fix g++ 4.8 build
+ After the commit:
+
+ commit 08106042d9f5fdff60c129bf33190639f1a98b2a
+ Date: Thu May 19 13:20:17 2022 +0100
+
+ gdb: move the type cast into gdbarch_tdep
+
+ GDB would no longer build using g++ 4.8. The issue appears to be some
+ confusion caused by GDB having 'struct gdbarch_tdep', but also a
+ templated function called 'gdbarch_tdep'. Prior to the above commit
+ the gdbarch_tdep function was not templated, and this compiled just
+ fine. Note that the above commit compiles just fine with later
+ versions of g++, so this issue was clearly fixed at some point, though
+ I've not tried to track down exactly when.
+
+ In this commit I propose to fix the g++ 4.8 build problem by renaming
+ 'struct gdbarch_tdep' to 'struct gdbarch_tdep_base'. This rename
+ better represents that the struct is only ever used as a base class,
+ and removes the overloading of the name, which allows GDB to build
+ with g++ 4.8.
+
+ I've also updated the comment on 'struct gdbarch_tdep_base' to fix a
+ typo, and the comment on the 'gdbarch_tdep' function, to mention that
+ in maintainer mode a run-time type check is performed.
+
+2022-07-26 Nick Clifton <nickc@redhat.com>
+
+ Fix indentation in loongarch code, preventing a compile time warning.
+
+2022-07-26 Lancelot SIX <lancelot.six@amd.com>
+
+ gdb/varobj: Fix varobj_invalidate_iter
+ The varobj_invalidate function is meant to be called when restarting a
+ process, and check at this point if some of the previously existing
+ varobj can be recreated in the context of the new process.
+
+ Two kind of varobj are subject to re-creation: global varobj (i.e.
+ varobj which reference a global variable), and floating varobj (i.e.
+ varobj which are always re-evaluated in the context of whatever is
+ the currently selected frame at the time of evaluation).
+
+ However, in the re-creation process, the varobj_invalidate_iter
+ recreates floating varobj as non-floating, due to an invalid parameter.
+ This patches fixes this and adds an assertion to check that if a varobj
+ is indeed recreated, it matches the original varobj "floating" property.
+
+ Another issue is that if at this recreation time the expression watched
+ by the floating varobj is not in scope, then the varobj is marked as
+ invalid. If later the user selects a frame where the expression becomes
+ valid, the varobj remains invalid and this is wrong. This patch also
+ make sure that floating varobj are not invalidated if they cannot be
+ evaluated.
+
+ The last important thing to note is that due to the previous patch, when
+ varobj_invalidate is executed (in the context of a new process), any
+ global var have already been invalidated (this has been done when the
+ objfile it referred to got invalidated). As a consequence,
+ varobj_invalidate tries to recreate vars which are already marked as
+ invalid. This does not entirely feels right, but I keep this behavior
+ for backward compatibility.
+
+ Tested on x86_64-linux
+
+2022-07-26 Lancelot SIX <lancelot.six@amd.com>
+
+ gdb/varobj: Fix use after free in varobj
+ Varobj object contains references to types, variables (i.e. struct
+ variable) and expression. All of those can reference data on an
+ objfile's obstack. It is possible for this objfile to be deleted (and
+ the obstack to be feed), while the varobj remains valid. Later, if the
+ user uses the varobj, this will result in a use-after-free error. With
+ address sanitizer build, this leads to a plain error. For non address
+ sanitizer build we might see undefined behaviour, which manifest
+ themself as assertion failures when accessing data backed by feed
+ memory.
+
+ This can be observed if we create a varobj that refers to ta symbol in a
+ shared library, after either the objfile gets reloaded (using the `file`
+ command) or after the shared library is unloaded (with a call to dlclose
+ for example).
+
+ This patch fixes those issues by:
+
+ - Adding cleanup procedure to the free_objfile observable. When
+ activated this observer clears expressions referencing the objfile
+ being freed, and removes references to blocks belonging to this
+ objfile.
+ - Adding varobj support in the `preserve_values` (gdb.value.c). This
+ ensures that before the objfile is unloaded, any type owned by the
+ objfile referenced by the varobj is replaced by an equivalent type
+ not owned by the objfile. This process is done here instead of in the
+ free_objfile observer in order to reuse the type hash table already
+ used for similar purpose when replacing types of values kept in the
+ value history.
+
+ This patch also makes sure to keep a reference to the expression's
+ gdbarch and language_defn members when the varobj->root->exp is
+ initialized. Those structures outlive the objfile, so this is safe.
+ This is done because those references might be used initialize a python
+ context even after exp is invalidated. Another approach could have been
+ to initialize the python context with default gdbarch and language_defn
+ (i.e. nullptr) if expr is NULL, but since we might still try to display
+ the value which was obtained by evaluating exp when it was still valid,
+ keeping track of the context which was used at this time seems
+ reasonable.
+
+ Tested on x86_64-Linux.
+
+ Co-Authored-By: Pedro Alves <pedro@palves.net>
+
+2022-07-26 Pedro Alves <pedro@palves.net>
+
+ MI: mi_runto -pending
+ With the CLI testsuite's runto proc, we can pass "allow-pending" as an
+ option, like:
+
+ runto func allow-pending
+
+ That is currently not possible with MI's mi_runto, however. This
+ patch makes it possible, by adding a new "-pending" option to
+ mi_runto.
+
+ A pending breakpoint shows different MI attributes compared to a
+ breakpoint with a location, so the regexp returned by
+ mi_make_breakpoint isn't suitable. Thus, add a new
+ mi_make_breakpoint_pending proc for pending breakpoints.
+
+ Tweak mi_runto to let it take and pass down arguments.
+
+ Change-Id: I185fef00ab545a1df2ce12b4dbc3da908783a37c
+
+2022-07-26 GDB Administrator <gdbadmin@sourceware.org>
+
+ Automatic date update in version.in
+
+2022-07-25 Ruud van der Pas <ruud.vanderpas@oracle.com>
+
+ gprofng: fix bug 29356 - Execution fails if gprofng is not included in PATH
+ gprofng/Changelog:
+ 2022-07-22 Ruud van der Pas <ruud.vanderpas@oracle.com>
+
+ PR gprofng/29356
+ * gp-display-html/gp-display-html.in: fixed a problem to execute
+ gp-display-text in case gprofng is not included in the search
+ path.
+
+2022-07-25 Ruud van der Pas <ruud.vanderpas@oracle.com>
+
+ gprofng: fix bug 29392 - Unexpected line format in summary file
+ gprofng/Changelog:
+ 2022-07-22 Ruud van der Pas <ruud.vanderpas@oracle.com>
+
+ PR gprofng/29392
+ * gp-display-html/gp-display-html.in: modified a regex, plus the
+ code to handle the results; renamed a variable to improve the
+ consistency in naming.
+
+2022-07-25 Ruud van der Pas <ruud.vanderpas@oracle.com>
+
+ gprofng: fix bug 29353 - Fix a lay-out issue in the html disassembly files
+ gprofng/Changelog:
+ 2022-07-22 Ruud van der Pas <ruud.vanderpas@oracle.com>
+
+ PR gprofng/29353
+ * gp-display-html/gp-display-html.in: fixed a problem in the
+ generation of html for the disassembly where instructions
+ without arguments were not handled correctly.
+
+2022-07-25 Ruud van der Pas <ruud.vanderpas@oracle.com>
+
+ gprofng: fix bug 29352 - Fix the message Hexadecimal number > 0xffffffff non-portable
+ gprofng/Changelog:
+ 2022-07-22 Ruud van der Pas <ruud.vanderpas@oracle.com>
+
+ PR gprofng/29352
+ * gp-display-html/gp-display-html.in: the hex subroutine from
+ the bigint module is now used.
+
+2022-07-25 Ruud van der Pas <ruud.vanderpas@oracle.com>
+
+ gprofng: fix bug 29351 - Move dynamic loading of modules to a later stage
+ gprofng/Changelog:
+ 2022-07-22 Ruud van der Pas <ruud.vanderpas@oracle.com>
+
+ PR gprofng/29351
+ * gp-display-html/gp-display-html.in: the dynamic loading of
+ modules occurred too early, resulting in the generation of the
+ man page to fail in case a module is missing; the loading part is
+ now done somewhat later in the execution to avoid this problem.
+
+2022-07-25 Kevin Buettner <kevinb@redhat.com>
+
+ set/show python dont-write-bytecode fixes
+ GDB uses the environment variable PYTHONDONTWRITEBYTECODE to
+ determine whether or not to write the result of byte-compiling
+ python modules when the "python dont-write-bytecode" setting
+ is "auto". Simon noticed that GDB's implementation doesn't
+ follow the Python documentation.
+
+ At present, GDB only checks for the existence of this environment
+ variable. That is not sufficient though. Regarding
+ PYTHONDONTWRITEBYTECODE, this document...
+
+ https://docs.python.org/3/using/cmdline.html
+
+ ...says:
+
+ If this is set to a non-empty string, Python won't try to write
+ .pyc files on the import of source modules.
+
+ This commit fixes GDB's handling of PYTHONDONTWRITEBYTECODE by adding
+ an empty string check.
+
+ This commit also corrects the set/show command documentation for
+ "python dont-write-bytecode". The current doc was just a copy
+ of that for set/show python ignore-environment.
+
+ During his review of an earlier version of this patch, Eli Zaretskii
+ asked that the help text that I proposed for "set/show python
+ dont-write-bytecode" be expanded. I've done that in addition to
+ clarifying the documentation of this option in the GDB manual.
+
+2022-07-25 Andrew Burgess <aburgess@redhat.com>
+
+ gdb/python: fix invalid use disassemble_info::stream
+ After this commit:
+
+ commit 81384924cdcc9eb2676dd9084b76845d7d0e0759
+ Date: Tue Apr 5 11:06:16 2022 +0100
+
+ gdb: have gdb_disassemble_info carry 'this' in its stream pointer
+
+ The disassemble_info::stream field will no longer be a ui_file*. That
+ commit failed to update one location in py-disasm.c though.
+
+ While running some tests using the Python disassembler API, I
+ triggered a call to gdbpy_disassembler::print_address_func, and, as I
+ had compiled GDB with the undefined behaviour sanitizer, GDB crashed
+ as the code currently (incorrectly) casts the stream field to be a
+ ui_file*.
+
+ In this commit I fix this error.
+
+ In order to test this case I had to tweak the existing test case a
+ little. I also spotted some debug printf statements in py-disasm.py,
+ which I have removed.
+
+2022-07-25 Andrew Burgess <aburgess@redhat.com>
+
+ gdb: fix use of uninitialised gdb_printing_disassembler::m_in_comment
+ Simon pointed out that gdb_printing_disassembler::m_in_comment can be
+ used uninitialised by the Python disassembler API code. This issue
+ was spotted when GDB was built with the undefined behaviour sanitizer,
+ and causes the gdb.python/py-disasm.exp test to fail like this:
+
+ (gdb) PASS: gdb.python/py-disasm.exp: global_disassembler=GlobalPreInfoDisassembler: python add_global_disassembler(GlobalPreInfoDisassembler)
+ disassemble main
+ Dump of assembler code for function main:
+ 0x0000555555555119 <+0>: push %rbp
+ 0x000055555555511a <+1>: mov %rsp,%rbp
+ 0x000055555555511d <+4>: nop
+ /home/user/src/binutils-gdb/gdb/disasm.h:144:12: runtime error: load of value 118, which is not a valid value for type 'bool'
+
+ The problem is that in disasmpy_builtin_disassemble we create a new
+ instance of gdbpy_disassembler, which is a sub-class of
+ gdb_printing_disassembler, however, the m_in_comment field is never
+ initialised.
+
+ This commit fixes the issue by providing a default initialisation
+ value for m_in_comment in disasm.h. As we only ever disassemble a
+ single instruction in disasmpy_builtin_disassemble then we don't need
+ to worry about reseting m_in_comment back to false after the single
+ instruction has been disassembled.
+
+ With this commit the above issue is resolved and
+ gdb.python/py-disasm.exp now passes.
+
+2022-07-25 H.J. Lu <hjl.tools@gmail.com>
+
+ ld: Compile 2 CTF tests with -O2
+ When GCC 12 is used to build binutils with -O0, the following 2 tests
+ failed:
+
+ FAIL: Conflicted data syms, partially indexed, stripped, with variables
+ FAIL: Conflicted data syms, partially indexed, stripped
+
+ Compile 2 tests with -O2 to avoid test failures.
+
+ PR ld/29378
+ * testsuite/ld-ctf/data-func-conflicted-vars.d: Compile with -O2.
+ * testsuite/ld-ctf/data-func-conflicted.d: Likewise.
+
+2022-07-25 Pedro Alves <pedro@palves.net>
+
+ struct packed: Add fallback byte array implementation
+ Attribute gcc_struct is not implemented in Clang targeting Windows, so
+ add a fallback standard-conforming implementation based on arrays.
+
+ I ran the testsuite on x86_64 GNU/Linux with this implementation
+ forced, and saw no regressions.
+
+ Bug: https://sourceware.org/bugzilla/show_bug.cgi?id=29373
+
+ Change-Id: I023315ee03622c59c397bf4affc0b68179c32374
+
+2022-07-25 Pedro Alves <pedro@palves.net>
+
+ struct packed: Unit tests and more operators
+ For PR gdb/29373, I wrote an alternative implementation of struct
+ packed that uses a gdb_byte array for internal representation, needed
+ for mingw+clang. While adding that, I wrote some unit tests to make
+ sure both implementations behave the same. While at it, I implemented
+ all relational operators. This commit adds said unit tests and
+ relational operators. The alternative gdb_byte array implementation
+ will come next.
+
+ Bug: https://sourceware.org/bugzilla/show_bug.cgi?id=29373
+
+ Change-Id: I023315ee03622c59c397bf4affc0b68179c32374
+
+2022-07-25 Pedro Alves <pedro@palves.net>
+
+ struct packed: Use gcc_struct on Windows
+ Building GDB on mingw/gcc hosts is currently broken, due to a static
+ assertion failure in gdbsupport/packed.h:
+
+ In file included from ../../../../../binutils-gdb/gdb/../gdbsupport/common-defs.h:201,
+ from ../../../../../binutils-gdb/gdb/defs.h:28,
+ from ../../../../../binutils-gdb/gdb/dwarf2/read.c:31:
+ ../../../../../binutils-gdb/gdb/../gdbsupport/packed.h: In instantiation of 'packed<T, Bytes>::packed(T) [with T = dwarf_unit_type; long long unsigned int Bytes = 1]':
+ ../../../../../binutils-gdb/gdb/dwarf2/read.h:181:74: required from here
+ ../../../../../binutils-gdb/gdb/../gdbsupport/packed.h:41:40: error: static assertion failed
+ 41 | gdb_static_assert (sizeof (packed) == Bytes);
+ | ~~~~~~~~~~~~~~~~^~~~~~~~
+ ../../../../../binutils-gdb/gdb/../gdbsupport/gdb_assert.h:27:48: note: in definition of macro 'gdb_static_assert'
+ 27 | #define gdb_static_assert(expr) static_assert (expr, "")
+ | ^~~~
+ ../../../../../binutils-gdb/gdb/../gdbsupport/packed.h:41:40: note: the comparison reduces to '(4 == 1)'
+ 41 | gdb_static_assert (sizeof (packed) == Bytes);
+ | ~~~~~~~~~~~~~~~~^~~~~~~~
+
+
+ The issue is that mingw gcc defaults to "-mms-bitfields", which
+ affects how bitfields are laid out. We can however tell GCC that we
+ want the regular GCC layout instead using attribute gcc_struct.
+
+ Attribute gcc_struct is not implemented in "clang -target
+ x86_64-pc-windows-gnu", so that will need a different fix.
+
+ Bug: https://sourceware.org/bugzilla/show_bug.cgi?id=29373
+
+ Change-Id: I023315ee03622c59c397bf4affc0b68179c32374
+
+2022-07-25 Andrew Burgess <aburgess@redhat.com>
+
+ binutils-gdb/git: highlight whitespace errors in source files
+ For a long time I've had this in my ~/.gitconfig:
+
+ [core]
+ whitespace = space-before-tab,indent-with-non-tab,trailing-space
+
+ which causes git to show me if I muck up and use spaces instead of
+ tabs, or leave in trailing whitespace. I find this really useful.
+
+ I recently proposed adding something like this to the .gitattributes
+ files for the GDB sub-directories (gdb, gdbsupport, and gdbserver)[1],
+ however, the question was asked - couldn't this be done at the top
+ level?
+
+ So, in this commit, I propose to update the top-level .gitattributes
+ file, after this commit, any git diff on a C, C++, Expect, or TCL
+ source file, will highlight the following whitespace errors:
+
+ (a) Use a space before a tab at the start of a line,
+
+ (b) Use of spaces where a tab could be used at the start of a line,
+ and
+
+ (c) Any trailing whitespace.
+
+ Errors are only highlighted in the diff on new or modified lines, so
+ you don't get spammed for errors on context lines that you haven't
+ modified.
+
+ The only downside I see to adding this at the top level is if there
+ are any sub-directories that don't follow the tabs/spaces indentation
+ rules very well already, in those directories you'll end up hitting
+ issues any time you edit a line. For GDB we're usually pretty good,
+ so having this highlighting isn't an issue.
+
+ [1] https://sourceware.org/pipermail/gdb-patches/2022-July/190843.html
+
+2022-07-25 Yvan Roux <yvan.roux@foss.st.com>
+
+ gdb/arm: Sync sp with other *sp registers
+ For Arm Cortex-M33 with security extensions, there are 4 different
+ stack pointers (msp_s, msp_ns, psp_s, psp_ns), without security
+ extensions and for other Cortex-M targets, there are 2 different
+ stack pointers (msp and psp).
+
+ With this patch, sp will always be in sync with one of the real stack
+ pointers on Arm targets that contain more than one stack pointer.
+
+2022-07-25 Torbjörn SVENSSON <torbjorn.svensson@foss.st.com>
+
+ gdb/arm: Use if-else if instead of switch
+ As the register numbers for the alternative Arm SP registers are not
+ constant, it's not possible to use switch statement to define the
+ rules. In order to not have a mix, replace the few existing
+ switch statements with regular if-else if statements
+
+2022-07-25 Tom Tromey <tromey@adacore.com>
+
+ Remove dead code from windows_nat_target::detach
+ windows_nat_target::detach has a variable 'detached' that is only set
+ after a call to 'error'. However, this can't happen because 'error'
+ throws an exception.
+
+ This patch removes the dead code.
+
+2022-07-25 Andrew Burgess <aburgess@redhat.com>
+
+ gdb: handle dis_style_sub_mnemonic disassembler style
+ In commit:
+
+ commit 4f46c0bc36471b725de0253bfec1a42a36e2c5c5
+ Date: Mon Jul 4 17:45:25 2022 +0100
+
+ opcodes: add new sub-mnemonic disassembler style
+
+ I added a new disassembler style dis_style_sub_mnemonic, but forgot to
+ add GDB support for this style. Fix this oversight in this commit.
+
+2022-07-25 Andrew Burgess <aburgess@redhat.com>
+
+ libopcodes/ppc: add support for disassembler styling
+ This commit adds disassembler styling to the libopcodes ppc
+ disassembler. This conversion was pretty straight forward, I just
+ converted the fprintf_func calls to fprintf_styled_func calls and
+ added an appropriate style.
+
+ For testing the new styling I just assembled then disassembled the
+ source files in gas/testsuite/gas/ppc and manually checked that the
+ styling looked reasonable.
+
+ I think the only slightly weird case was how things like '4*cr1+eq'
+ are styled. As best I can tell, this construct, used for example in
+ this instruction:
+
+ crand 4*cr1+lt,4*cr1+gt,4*cr1+eq
+
+ is used to access a field of a control register. I initially tried
+ styling this whole construct as a register[1], but during review it
+ was suggested that instead different parts of the text should have
+ different styles. In this commit I propose styling '4*cr1+lt' like
+ this:
+
+ 4 - immediate,
+ * - text,
+ cr1 - register
+ + - text
+ lt - sub-mnemonic
+
+ If the user does not request styled output from objdump, then there
+ should be no change in the disassembler output after this commit.
+
+ [1] https://sourceware.org/pipermail/binutils/2022-July/121771.html
+
+2022-07-25 Andrew Burgess <aburgess@redhat.com>
+
+ opcodes: add new sub-mnemonic disassembler style
+ When adding libopcodes disassembler styling support for AArch64, it
+ feels like the results would be improved by having a new sub-mnemonic
+ style. This will be used in cases like:
+
+ add w16, w7, w1, uxtb #2
+ ^^^^----- Here
+
+ And:
+
+ cinc w0, w1, ne
+ ^^----- Here
+
+ This commit just adds the new style, and prepares objdump to handle
+ the style. A later commit will add AArch64 styling, and will actually
+ make use of the style.
+
+ As this style is currently unused, there should be no user visible
+ changes after this commit.
+
+2022-07-25 liuzhensong <liuzhensong@loongson.cn>
+
+ LoongArch: Add testcases for new relocate types.
+ gas/testsuite/gas/all/
+ gas.exp
+ gas/testsuite/gas/loongarch/
+ jmp_op.d
+ jmp_op.s
+ macro_op.d
+ macro_op.s
+ macro_op_32.d
+ macro_op_32.s
+ macro_op_large_abs.d
+ macro_op_large_abs.s
+ macro_op_large_pc.d
+ macro_op_large_pc.s
+ reloc.d
+ reloc.s
+
+ ld/testsuite/ld-elf/
+ pr26936.d
+ shared.exp
+ ld/testsuite/ld-loongarch-elf/
+ attr-ifunc-4.c
+ attr-ifunc-4.out
+ disas-jirl.d
+ ifunc.exp
+ jmp_op.d
+ jmp_op.s
+ libnopic-global.s
+ macro_op.d
+ macro_op.s
+ macro_op_32.d
+ macro_op_32.s
+ nopic-global-so.rd
+ nopic-global-so.sd
+ nopic-global.out
+ nopic-global.s
+ nopic-global.sd
+ nopic-global.xd
+ nopic-local.out
+ nopic-local.rd
+ nopic-local.s
+ nopic-local.sd
+ nopic-local.xd
+ nopic-weak-global-so.rd
+ nopic-weak-global-so.sd
+ nopic-weak-global.out
+ nopic-weak-global.s
+ nopic-weak-global.sd
+ nopic-weak-global.xd
+ nopic-weak-local.out
+ nopic-weak-local.rd
+ nopic-weak-local.s
+ nopic-weak-local.sd
+ nopic-weak-local.xd
+ pic.exp
+ pic.ld
+
+2022-07-25 liuzhensong <liuzhensong@loongson.cn>
+
+ bfd: Delete R_LARCH_NONE from dyn info of LoongArch.
+ Some R_LARCH_64 in section .eh_frame will to generate
+ R_LARCH_NONE, we change relocation to R_LARCH_32_PCREL
+ from R_LARCH_64 in setction .eh_frame and not generate
+ dynamic relocation for R_LARCH_32_PCREL.
+
+ Add New relocate type R_LARCH_32_PCREL for .eh_frame.
+
+ include/elf/
+ loongarch.h
+
+ bfd/
+ bfd/bfd-in2.h
+ libbfd.h
+ reloc.c
+ elfxx-loongarch.c
+ elfnn-loongarch.c
+
+ gas/config/
+ tc-loongarch.c
+
+ binutils/
+ readelf.c
+
+ ld/testsuite/ld-elf/
+ eh5.d
+
+2022-07-25 liuzhensong <liuzhensong@loongson.cn>
+
+ LoongArch: Move ifunc info to rela.dyn from rela.plt.
+ Delete R_LARCH_IRELATIVE from dynamic loader (glibc ld.so) when
+ loading lazy function (rela.plt section).
+
+ In dynamic programes, move ifunc dynamic relocate info to section
+ srelgot from srelplt.
+
+ bfd/
+ elfnn-loongarch.c
+
+2022-07-25 liuzhensong <liuzhensong@loongson.cn>
+
+ LoongArch: gas: Add new reloc types.
+ Generate new relocate types while use new macro insns.
+
+ gas/config/
+ loongarch-lex.h
+ loongarch-parse.y
+ tc-loongarch.c
+ tc-loongarch.h
+
+2022-07-25 liuzhensong <liuzhensong@loongson.cn>
+
+ LoongArch:opcodes: Add new reloc types.
+ opcodes: Replace old insns with news and generate new relocate types
+ while macro insns expanding.
+
+ opcodes/
+ loongarch-opc.c
+
+2022-07-25 liuzhensong <liuzhensong@loongson.cn>
+
+ bfd: Add supported for LoongArch new relocations.
+ Define new reloc types according to linker needs.
+
+ include/elf/
+ loongarch.h
+
+ bfd/
+ bfd-in2.h
+ libbfd.h
+ reloc.c
+ elfnn-loongarch.c
+ elfxx-loongarch.c
+ elfxx-loongarch.h
+
+2022-07-25 Alan Modra <amodra@gmail.com>
+
+ Re: PowerPC64 .branch_lt address
+ On seeing PR29369 my suspicion was naturally on a recent powerpc64
+ change, commit 0ab80031430e. Without a reproducer, I spent time
+ wondering what could have gone wrong, and while I doubt this patch
+ would have fixed the PR, there are some improvements that can be made
+ to cater for user silliness.
+
+ I also noticed that when -z relro -z now sections are created out of
+ order, with .got before .plt in the section headers but .got is laid
+ out at a higher address. That's due to the address expression for
+ .branch_lt referencing SIZEOF(.got) and so calling init_os (which
+ creates a bfd section) for .got before the .plt section is created.
+ Fix that by ignoring SIZEOF in exp_init_os. Unlike ADDR and LOADADDR
+ which need to reference section vma and lma respectively, SIZEOF can
+ and does cope with a missing bfd section by returning zero for its
+ size, which of course is correct.
+
+ PR 29369
+ * ldlang.c (exp_init_os): Don't create a bfd section for SIZEOF.
+ * emulparams/elf64ppc.sh (OTHER_RELRO_SECTIONS_2): Revise
+ .branch_lt address to take into account possible user sections
+ with alignment larger than 8 bytes.
+
+2022-07-25 GDB Administrator <gdbadmin@sourceware.org>
+
+ Automatic date update in version.in
+
+2022-07-24 Enze Li <enze.li@hotmail.com>
+
+ gdb/testsuite: add a clear test to py-breakpoint.exp
+ This patch adds a test case to try to clear an internal python
+ breakpoint using the clear command.
+
+ This was suggested by Pedro during a code review of the following
+ commit.
+
+ commit a5c69b1e49bae4d0dcb20f324cebb310c63495c6
+ Date: Sun Apr 17 15:09:46 2022 +0800
+
+ gdb: fix using clear command to delete non-user breakpoints(PR cli/7161)
+
+ Tested on x86_64 openSUSE Tumbleweed.
+
+2022-07-24 Enze Li <enze.li@hotmail.com>
+
+ gdb/testsuite: rename get_maint_bp_addr and move it to gdb-utils.exp
+ The get_maint_bp_addr procedure will be shared by other test suite, so
+ move it to gdb-utils.exp.
+
+ Following Andrew's suggestion, I renamed get_maint_bp_addr to
+ gdb_get_bp_addr, since it would have handled normal breakpoints in
+ addition to the internal ones. Note that there is still room for
+ improvement in this procedure, which I indicated in comments nearby.
+
+2022-07-24 GDB Administrator <gdbadmin@sourceware.org>
+
+ Automatic date update in version.in
+
+2022-07-23 GDB Administrator <gdbadmin@sourceware.org>
+
+ Automatic date update in version.in
+
+2022-07-22 Tom de Vries <tdevries@suse.de>
+
+ [gdb/symtab] Fix duplicate CUs in all_comp_units
+ When running test-case gdb.cp/cpexprs-debug-types.exp with target board
+ cc-with-debug-names on a system with gcc 12.1.1 (defaulting to dwarf 5), I
+ run into:
+ ...
+ (gdb) file cpexprs-debug-types^M
+ Reading symbols from cpexprs-debug-types...^M
+ warning: Section .debug_aranges in cpexprs-debug-types has duplicate \
+ debug_info_offset 0x0, ignoring .debug_aranges.^M
+ gdb/dwarf2/read.h:309: internal-error: set_length: \
+ Assertion `m_length == length' failed.^M
+ ...
+
+ The exec contains a .debug_names section, which gdb rejects due to
+ .debug_names containing a list of TUs, while the exec doesn't contain a
+ .debug_types section (which is what you'd expect for dwarf 4).
+
+ Gdb then falls back onto the cooked index, which calls create_all_comp_units
+ to create all_comp_units. However, the failed index reading left some
+ elements in all_comp_units, so we end up with duplicates in all_comp_units,
+ which causes the misleading complaint and the assert.
+
+ Fix this by:
+ - asserting at the start of create_all_comp_units that all_comp_units is empty,
+ as we do in create_cus_from_index and create_cus_from_debug_names, and
+ - cleaning up all_comp_units when failing in dwarf2_read_debug_names.
+
+ Add a similar cleanup in dwarf2_read_gdb_index.
+
+ Tested on x86_64-linux.
+
+ Bug: https://sourceware.org/bugzilla/show_bug.cgi?id=29381
+
+2022-07-22 Simon Marchi <simon.marchi@polymtl.ca>
+
+ gdb/testsuite: give binaries distinct names in Ada tests
+ Some Ada tests repeat their test sequence with different gnat-encodings,
+ typically "all" and "minimal". However, they give the same name to both
+ binaries, meaning the second run overwrites the binary of the first run.
+ This makes it difficult and confusing when trying to reproduce problems
+ manually with the test artifacts. Change those tests to use unique
+ names for each pass.
+
+ Change-Id: Iaa3c9f041241249a7d67392e785c31aa189dcc88
+
+2022-07-22 Tom Tromey <tromey@adacore.com>
+
+ Change target_ops::async to accept bool
+ This changes the parameter of target_ops::async from int to bool.
+ Regression tested on x86-64 Fedora 34.
+
+ Fix typo in windows-nat.c
+ I noticed a typo in a printf in windows-nat.c. This fixes it.
+
+2022-07-22 Tom de Vries <tdevries@suse.de>
+
+ [gdb] Add empty range unit test for gdb::parallel_for_each
+ Add a unit test that verifies that we can call gdb::parallel_for_each with an
+ empty range.
+
+ Tested on x86_64-linux.
+
+2022-07-22 Alan Modra <amodra@gmail.com>
+
+ PR17122, OSX 10.9 build failure
+ sbrk hasn't been used in binutils/ or ld/ for quite some time (so the
+ PR was fixed a while ago). Tidy up configury.
+
+ PR 17122
+ binutils/
+ * configure.ac: Don't check for sbrk.
+ * sysdep.h (sbrk): Don't supply fallback declaration.
+ * config.in: Regenerate.
+ * configure: Regenerate.
+ ld/
+ * configure.ac: Don't check for sbrk.
+ * config.in: Regenerate.
+ * configure: Regenerate.
+
+2022-07-22 Jiangshuai Li <jiangshuai_li@linux.alibaba-inc.com>
+
+ gdb/csky modify registers list for general_reggroup
+ There are two modification points here:
+ 1. For the debugging of csky architecture, after executing "info register",
+ we hope to print out GPRs, PC and the registers related to exceptions.
+ 2. With tdesc-xml, users can view the register groups described in XML.
+
+2022-07-22 Alan Modra <amodra@gmail.com>
+
+ PR15951, binutils testsuite builds status wrapper unconditionally
+ PR 15951
+ * testsuite/binutils-all/objcopy.exp: Build testglue.o when
+ needs_status_wrapper.
+
+2022-07-22 GDB Administrator <gdbadmin@sourceware.org>
+
+ Automatic date update in version.in
+
+2022-07-21 Peter Bergner <bergner@linux.ibm.com>
+
+ Add ChangeLog entry from previous commit
+
+2022-07-21 Peter Bergner <bergner@linux.ibm.com>
+
+ PowerPC: Create new MMA instruction masks and use them
+ The MMA instructions use XX3_MASK|3<<21 as an instruction mask, but that
+ misses the RC bit/bit 31, so if we disassemble a .long that represents an
+ MMA instruction except that it also has bit 31 set, we will erroneously
+ disassemble it to that MMA instruction. We create new masks defines that
+ contain bit 31 so that doesn't happen anymore.
+
+ opcodes/
+ * ppc-opc.c (XACC_MASK, XX3ACC_MASK): New defines.
+ (P_GER_MASK, xxmfacc, xxmtacc, xxsetaccz, xvi8ger4pp, xvi8ger4,
+ xvf16ger2pp, xvf16ger2, xvf32gerpp, xvf32ger, xvi4ger8pp, xvi4ger8,
+ xvi16ger2spp, xvi16ger2s, xvbf16ger2pp, xvbf16ger2, xvf64gerpp,
+ xvf64ger, xvi16ger2, xvf16ger2np, xvf32gernp, xvi8ger4spp, xvi16ger2pp,
+ xvbf16ger2np, xvf64gernp, xvf16ger2pn, xvf32gerpn, xvbf16ger2pn,
+ xvf64gerpn, xvf16ger2nn, xvf32gernn, xvbf16ger2nn, xvf64gernn: Use them.
+
+2022-07-21 H.J. Lu <hjl.tools@gmail.com>
+
+ i386: Don't allow GOTOFF relocation against IFUNC symbol for PIC
+ We can't use the PLT entry as the function address for PIC since the PIC
+ register may not be set up properly for indirect call.
+
+ bfd/
+
+ PR ld/27998
+ * elf32-i386.c (elf_i386_relocate_section): Don't allow GOTOFF
+ relocation against IFUNC symbol for PIC.
+
+ ld/
+
+ PR ld/27998
+ * testsuite/ld-i386/pr27998a.d: Replace -shared with -e bar.
+ * testsuite/ld-i386/pr27998b.d: Expect a linker error.
+ * testsuite/ld-ifunc/ifunc-2-i386-now.d: Updated.
+ * testsuite/ld-ifunc/ifunc-2-local-i386-now.d: Likewise.
+ * testsuite/ld-ifunc/ifunc-2-i386.s: Replace @GOTOFF with @GOT.
+ * testsuite/ld-ifunc/ifunc-2-local-i386.s: Likewise.
+
+2022-07-21 Andrew Burgess <aburgess@redhat.com>
+
+ gdb: ensure the cast in gdbarch_tdep is valid
+ This commit makes use of gdb::checked_static_cast when casting the
+ generic gdbarch_tdep pointer to a specific sub-class type. This means
+ that, when compiled in developer mode, GDB will validate that the cast
+ is correct.
+
+ In order to use gdb::checked_static_cast the types involved must have
+ RTTI, which is why the gdbarch_tdep base class now has a virtual
+ destructor.
+
+ Assuming there are no bugs in GDB where we cast a gdbarch_tdep pointer
+ to the wrong type, then there should be no changes after this commit.
+
+ If any bugs do exist, then GDB will now assert (in a developer build).
+
+2022-07-21 Andrew Burgess <aburgess@redhat.com>
+
+ gdbsupport: add checked_static_cast
+ This commit was inspired by these mailing list posts:
+
+ https://sourceware.org/pipermail/gdb-patches/2022-June/190323.html
+ https://sourceware.org/pipermail/gdb-patches/2022-April/188098.html
+
+ The idea is to add a new function gdb::checked_static_cast, which can,
+ in some cases, be used as a drop-in replacement for static_cast. And
+ so, if I previously wrote this:
+
+ BaseClass *base = get_base_class_pointer ();
+ DerivedClass *derived = static_cast<DerivedClass *> (base);
+
+ I can now write:
+
+ BaseClass *base = get_base_class_pointer ();
+ DerivedClass *derived = gdb::checked_static_cast<DerivedClass *> (base);
+
+ The requirement is that BaseClass and DerivedClass must be
+ polymorphic.
+
+ The benefit of making this change is that, when GDB is built in
+ developer mode, a run-time check will be made to ensure that `base`
+ really is of type DerivedClass before the cast is performed. If
+ `base` is not of type DerivedClass then GDB will assert.
+
+ In a non-developer build gdb::checked_static_cast is equivalent to a
+ static_cast, and there should be no performance difference.
+
+ This commit adds the support function, but does not make use of this
+ function, a use will be added in the next commit.
+
+ Co-Authored-By: Pedro Alves <pedro@palves.net>
+ Co-Authored-By: Tom Tromey <tom@tromey.com>
+
+2022-07-21 Andrew Burgess <aburgess@redhat.com>
+
+ gdb: move the type cast into gdbarch_tdep
+ I built GDB for all targets on a x86-64/GNU-Linux system, and
+ then (accidentally) passed GDB a RISC-V binary, and asked GDB to "run"
+ the binary on the native target. I got this error:
+
+ (gdb) show architecture
+ The target architecture is set to "auto" (currently "i386").
+ (gdb) file /tmp/hello.rv32.exe
+ Reading symbols from /tmp/hello.rv32.exe...
+ (gdb) show architecture
+ The target architecture is set to "auto" (currently "riscv:rv32").
+ (gdb) run
+ Starting program: /tmp/hello.rv32.exe
+ ../../src/gdb/i387-tdep.c:596: internal-error: i387_supply_fxsave: Assertion `tdep->st0_regnum >= I386_ST0_REGNUM' failed.
+
+ What's going on here is this; initially the architecture is i386, this
+ is based on the default architecture, which is set based on the native
+ target. After loading the RISC-V executable the architecture of the
+ current inferior is updated based on the architecture of the
+ executable.
+
+ When we "run", GDB does a fork & exec, with the inferior being
+ controlled through ptrace. GDB sees an initial stop from the inferior
+ as soon as the inferior comes to life. In response to this stop GDB
+ ends up calling save_stop_reason (linux-nat.c), which ends up trying
+ to read register from the inferior, to do this we end up calling
+ target_ops::fetch_registers, which, for the x86-64 native target,
+ calls amd64_linux_nat_target::fetch_registers.
+
+ After this I eventually end up in i387_supply_fxsave, different x86
+ based targets will end in different functions to fetch registers, but
+ it doesn't really matter which function we end up in, the problem is
+ this line, which is repeated in many places:
+
+ i386_gdbarch_tdep *tdep = (i386_gdbarch_tdep *) gdbarch_tdep (arch);
+
+ The problem here is that the ARCH in this line comes from the current
+ inferior, which, as we discussed above, will be a RISC-V gdbarch, the
+ tdep field will actually be of type riscv_gdbarch_tdep, not
+ i386_gdbarch_tdep. After this cast we are relying on undefined
+ behaviour, in my case I happen to trigger an assert, but this might
+ not always be the case.
+
+ The thing I tried that exposed this problem was of course, trying to
+ start an executable of the wrong architecture on a native target. I
+ don't think that the correct solution for this problem is to detect,
+ at the point of cast, that the gdbarch_tdep object is of the wrong
+ type, but, I did wonder, is there a way that we could protect
+ ourselves from incorrectly casting the gdbarch_tdep object?
+
+ I think that there is something we can do here, and this commit is the
+ first step in that direction, though no actual check is added by this
+ commit.
+
+ This commit can be split into two parts:
+
+ (1) In gdbarch.h and arch-utils.c. In these files I have modified
+ gdbarch_tdep (the function) so that it now takes a template argument,
+ like this:
+
+ template<typename TDepType>
+ static inline TDepType *
+ gdbarch_tdep (struct gdbarch *gdbarch)
+ {
+ struct gdbarch_tdep *tdep = gdbarch_tdep_1 (gdbarch);
+ return static_cast<TDepType *> (tdep);
+ }
+
+ After this change we are no better protected, but the cast is now
+ done within the gdbarch_tdep function rather than at the call sites,
+ this leads to the second, much larger change in this commit,
+
+ (2) Everywhere gdbarch_tdep is called, we make changes like this:
+
+ - i386_gdbarch_tdep *tdep = (i386_gdbarch_tdep *) gdbarch_tdep (arch);
+ + i386_gdbarch_tdep *tdep = gdbarch_tdep<i386_gdbarch_tdep> (arch);
+
+ There should be no functional change after this commit.
+
+ In the next commit I will build on this change to add an assertion in
+ gdbarch_tdep that checks we are casting to the correct type.
+
+2022-07-21 Andrew Burgess <aburgess@redhat.com>
+
+ gdb: select suitable thread for gdbarch_adjust_breakpoint_address
+ The three targets that implement gdbarch_adjust_breakpoint_address are
+ arm, frv, and mips. In each of these targets the adjust breakpoint
+ address function does some combination of reading the symbol table, or
+ reading memory at the location the breakpoint could be placed.
+
+ The problem is that performing these actions requires that the current
+ inferior and program space be the one in which the breakpoint will be
+ placed, and this is not currently always the case.
+
+ Consider a GDB session with multiple inferiors. One inferior might be
+ a native target while another could be a remote target of a completely
+ different architecture. Alternatively, if we consider ARM and
+ AArch64, one native inferior might be AArch64, while a second native
+ inferior could be ARM.
+
+ In these cases it is possible, and valid, for a user to have one
+ inferior selected, and place a breakpoint in the other inferior by
+ placing a breakpoint on a particular symbol.
+
+ If this happens, then currently, when
+ gdbarch_adjust_breakpoint_address is called, the wrong inferior (and
+ program space) will be selected, and memory reads, and symbol look
+ ups, will not return the expected results, this could lead to
+ breakpoints being placed in the wrong location.
+
+ There are currently two places where gdbarch_adjust_breakpoint_address
+ is called:
+
+ 1. In infrun.c, in the function handle_step_into_function. In this
+ case, I believe that the correct inferior and program space will
+ already be selected as this is called as part of the stop event
+ handling, so I don't think we need to worry about this case, and
+
+ 2. In breakpoint.c, in the function adjust_breakpoint_address, which
+ is itself called from code_breakpoint::add_location and
+ watch_command_1.
+
+ The watch_command_1 case I don't think we need to worry about, this
+ is for when a local watch expression is created, which can only be
+ in the currently selected inferior, so this case should be fine.
+
+ The code_breakpoint::add_location case is the one that needs fixing,
+ this is what allows a breakpoint to be created between inferiors.
+
+ To fix the code_breakpoint::add_location case, I propose that we pass
+ the "correct" program_space (i.e. the program space in which the
+ breakpoint will be created) to the adjust_breakpoint_address function.
+ Then in adjust_breakpoint_address we can make use of
+ switch_to_program_space_and_thread to switch program_space and
+ inferior before calling gdbarch_adjust_breakpoint_address.
+
+ I discovered this issue while working on a later patch in this
+ series. This later patch will detect when we cast the result of
+ gdbarch_tdep to the wrong type.
+
+ With this later patch in place I ran gdb.multi/multi-arch.exp on an
+ AArch64 target. In this situation, two inferiors are created, an
+ AArch64 inferior, and an ARM inferior. The test selected the AArch64
+ inferior and tries to create a breakpoint in the ARM inferior.
+
+ As a result of this we end up in arm_adjust_breakpoint_address, which
+ calls arm_pc_is_thumb. Before this commit the AArch64 inferior would
+ be current. As a result, all of the checks in arm_pc_is_thumb would
+ fail (they rely on reading symbols from the current program space),
+ and so, at the end of arm_pc_is_thumb we would call
+ arm_frame_is_thumb. However, remember, at this point the current
+ inferior is the AArch64 inferior, so the current frame is an AArch64
+ frame.
+
+ In arm_frame_is_thumb we call arm_psr_thumb_bit, which calls
+ gdbarch_tdep and casts the result to arm_gdbarch_tdep. This is wrong,
+ the tdep field is of type aarch64_gdbarch_tdep. After this we have
+ undefined behaviour.
+
+ With this patch in place, we will have switched to a thread in the ARM
+ program space before calling arm_adjust_breakpoint_address. As a
+ result, we now succeed in looking up the required symbols in
+ arm_pc_is_thumb, and so we never call arm_frame_is_thumb.
+
+ However, in the worst case scenario, if we did end up calling
+ arm_frame_is_thumb, as the current inferior should now be the ARM
+ inferior, the current frame should be an ARM frame, so we still should
+ not hit undefined behaviour.
+
+ I have added an assert to arm_frame_is_thumb.
+
+2022-07-21 Andrew Burgess <aburgess@redhat.com>
+
+ gdb/mips: rewrite show_mask_address
+ This commit is similar to the previous commit, but in this case GDB is
+ actually relying on undefined behaviour.
+
+ Consider building GDB for all targets on x86-64/GNU-Linux, then doing
+ this:
+
+ (gdb) show mips mask-address
+ Zeroing of upper 32 bits of 64-bit addresses is auto.
+ The 32 bit address mask is set automatically. Currently disabled
+ (gdb)
+
+ The 'show mips mask-address' command ends up in show_mask_address in
+ mips-tdep.c, and this function does this:
+
+ mips_gdbarch_tdep *tdep
+ = (mips_gdbarch_tdep *) gdbarch_tdep (target_gdbarch ());
+
+ Later we might pass TDEP to mips_mask_address_p. However, in my
+ example above, on an x86-64 native target, the current target
+ architecture will be an x86-64 gdbarch, and the tdep field within the
+ gdbarch will be of type i386_gdbarch_tdep, not of type
+ mips_gdbarch_tdep, as a result the cast above was incorrect, and TDEP
+ is not pointing at what it thinks it is.
+
+ I also think the current output is a little confusing, we appear to
+ have two lines that show the same information, but using different
+ words.
+
+ The first line comes from calling deprecated_show_value_hack, while
+ the second line is printed directly from show_mask_address. However,
+ both of these lines are printing the same mask_address_var value. I
+ don't think the two lines actually adds any value here.
+
+ Finally, none of the text in this function is passed through the
+ internationalisation mechanism.
+
+ It would be nice to remove another use of deprecated_show_value_hack
+ if possible, so this commit does a complete rewrite of
+ show_mask_address.
+
+ After this commit the output of the above example command, still on my
+ x86-64 native target is:
+
+ (gdb) show mips mask-address
+ Zeroing of upper 32 bits of 64-bit addresses is "auto" (current architecture is not MIPS).
+
+ The 'current architecture is not MIPS' text is only displayed when the
+ current architecture is not MIPS. If the architecture is mips then we
+ get the more commonly seen 'currently "on"' or 'currently "off"', like
+ this:
+
+ (gdb) set architecture mips
+ The target architecture is set to "mips".
+ (gdb) show mips mask-address
+ Zeroing of upper 32 bits of 64-bit addresses is "auto" (currently "off").
+ (gdb)
+
+ All the text is passed through the internationalisation mechanism, and
+ we only call gdbarch_tdep when we know the gdbarch architecture is
+ bfd_arch_mips.
+
+2022-07-21 Andrew Burgess <aburgess@redhat.com>
+
+ gdb/arm: move fetch of arm_gdbarch_tdep to a more inner scope
+ This is a small refactor to resolve an issue before it becomes a
+ problem in a later commit.
+
+ Move the fetching of an arm_gdbarch_tdep into a more inner scope
+ within two functions in arm-tdep.c.
+
+ The problem with the current code is that the functions in question
+ are used as the callbacks for two set/show parameters. These set/show
+ parameters are available no matter the current architecture, but are
+ really about controlling an ARM architecture specific setting. And
+ so, if I build GDB for all targets on an x86-64/GNU-Linux system, I
+ can still do this:
+
+ (gdb) show arm fpu
+ (gdb) show arm abi
+
+ After these calls we end up in show_fp_model and arm_show_abi
+ respectively, where we unconditionally do this:
+
+ arm_gdbarch_tdep *tdep
+ = (arm_gdbarch_tdep *) gdbarch_tdep (target_gdbarch ());
+
+ However, the gdbarch_tdep() result will only be a arm_gdbarch_tdep if
+ the current architecture is ARM, otherwise the result will actually be
+ of some other type.
+
+ This isn't actually a problem, as in both cases the use of tdep is
+ guarded by a later check that the gdbarch architecture is
+ bfd_arch_arm.
+
+ This commit just moves the call to gdbarch_tdep() after the
+ architecture check.
+
+ In a later commit gdbarch_tdep() will be able to spot when we are
+ casting the result to the wrong type, and this function will trigger
+ assertion failures if things are not fixed.
+
+ There should be not user visible changes after this commit.
+
+2022-07-21 Torbjörn SVENSSON <torbjorn.svensson@foss.st.com>
+
+ [arm] Rename arm_cache_is_sp_register to arm_is_alternative_sp_register
+ All usages of this helper are really made to check if the register is
+ one of the alternative SP registers (MSP/MSP_S/MSP_NS/PSP/PSP_S/PSP_NS)
+ with the ARM_SP_REGNUM case being handled separately.
+
+2022-07-21 Tom de Vries <tdevries@suse.de>
+
+ [gdb/python] Fix typo in test_python
+ Fix typo in ref_output_0 variable in test_python.
+
+ Tested by running the selftest on x86_64-linux with python 3.11.
+
+2022-07-21 Tom de Vries <tdevries@suse.de>
+
+ [gdb/python] Fix python selftest with python 3.11
+ With python 3.11 I noticed:
+ ...
+ $ gdb -q -batch -ex "maint selftest python"
+ Running selftest python.
+ Self test failed: self-test failed at gdb/python/python.c:2246
+ Ran 1 unit tests, 1 failed
+ ...
+
+ In more detail:
+ ...
+ (gdb) p output
+ $5 = "Traceback (most recent call last):\n File \"<string>\", line 0, \
+ in <module>\nKeyboardInterrupt\n"
+ (gdb) p ref_output
+ $6 = "Traceback (most recent call last):\n File \"<string>\", line 1, \
+ in <module>\nKeyboardInterrupt\n"
+ ...
+
+ Fix this by also allowing line number 0.
+
+ Tested on x86_64-linux.
+
+ This should hopefully fix buildbot builder gdb-rawhide-x86_64.
+
+2022-07-21 Tom de Vries <tdevries@suse.de>
+
+ [gdbsupport] Fix type of parallel_for_each_debug
+ When I changed the initialization of parallel_for_each_debug from 0 to false,
+ I forgot to change the type from int to bool. Fix this.
+
+ Tested by rebuilding on x86_64-linux.
+
+2022-07-21 Tom de Vries <tdevries@suse.de>
+
+ [gdb/symtab] Fix bad compile unit index complaint
+ I noticed this code in dw2_debug_names_iterator::next:
+ ...
+ case DW_IDX_compile_unit:
+ /* Don't crash on bad data. */
+ if (ull >= per_bfd->all_comp_units.size ())
+ {
+ complaint (_(".debug_names entry has bad CU index %s"
+ " [in module %s]"),
+ pulongest (ull),
+ objfile_name (objfile));
+ continue;
+ }
+ per_cu = per_bfd->get_cu (ull);
+ break;
+ ...
+
+ This code used to DTRT, before we started keeping both CUs and TUs in
+ all_comp_units.
+
+ Fix by using "per_bfd->all_comp_units.size () - per_bfd->tu_stats.nr_tus"
+ instead.
+
+ It's hard to produce a test-case for this, but let's try at least to trigger
+ the complaint somehow. We start out by creating an exec with .debug_types and
+ .debug_names:
+ ...
+ $ gcc -g ~/hello.c -fdebug-types-section
+ $ gdb-add-index -dwarf-5 a.out
+ ...
+ and verify that we don't see any complaints:
+ ...
+ $ gdb -q -batch -iex "set complaints 100" ./a.out
+ ...
+
+ We look at the CU and TU table using readelf -w and conclude that we have
+ nr_cus == 6 and nr_tus == 1.
+
+ Now override ull in dw2_debug_names_iterator::next for the DW_IDX_compile_unit
+ case to 6, and we have:
+ ...
+ $ gdb -q -batch -iex "set complaints 100" ./a.out
+ During symbol reading: .debug_names entry has bad CU index 6 [in module a.out]
+ ...
+
+ After this, it still crashes because this code in
+ dw2_debug_names_iterator::next:
+ ...
+ /* Skip if already read in. */
+ if (m_per_objfile->symtab_set_p (per_cu))
+ goto again;
+ ...
+ is called with per_cu == nullptr.
+
+ Fix this by skipping the entry if per_cu == nullptr.
+
+ Now revert the fix and observe that the complaint disappears, so we've
+ confirmed that the fix is required.
+
+ A somewhat similar issue for .gdb_index in dw2_symtab_iter_next has been filed
+ as PR29367.
+
+ Tested on x86_64-linux, with native and target board cc-with-debug-names.
+
+ Bug: https://sourceware.org/bugzilla/show_bug.cgi?id=29336
+
+2022-07-21 Jan Beulich <jbeulich@suse.com>
+
+ x86: replace wrong attributes on VCVTDQ2PH{X,Y}
+ A standalone (without SAE) StaticRounding attribute is meaningless, and
+ indeed all other similar insns have ATTSyntax there instead. I can only
+ assume this was some strange copy-and-paste mistake.
+
+ x86/Intel: correct AVX512F scatter insn element sizes
+ I clearly screwed up in 6ff00b5e12e7 ("x86/Intel: correct permitted
+ operand sizes for AVX512 scatter/gather") giving all AVX512F scatter
+ insns Dword element size. Update testcases (also their gather parts),
+ utilizing that there previously were two identical lines each (for no
+ apparent reason).
+
+2022-07-21 Alan Modra <amodra@gmail.com>
+
+ PR29390, DW_CFA_AARCH64_negate_ra_state vs. DW_CFA_GNU_window_save
+ PR 29390
+ binutils/
+ * dwarf.c (is_aarch64, DW_CFA_GNU_window_save_name): New.
+ (display_debug_frames): Use them.
+ (init_dwarf_regnames_aarch64): Set is_aarch64.
+ (init_dwarf_regnames_by_elf_machine_code): Clear is_aarch64.
+ (init_dwarf_regnames_by_bfd_arch_and_mach): Likewise.
+ gas/
+ * testsuite/gas/aarch64/pac_ab_key.d: Adjust expected output.
+ * testsuite/gas/aarch64/pac_negate_ra_state.d: Likewise.
+
+2022-07-21 Alan Modra <amodra@gmail.com>
+
+ PR29337, readelf CU/TU mixup in .gdb_index
+ Commit 244e19c79111 changed a number of variables in display_gdb_index
+ to count entries rather than words.
+
+ PR 29337
+ * dwarf.c (display_gdb_index): Correct use of cu_list_elements.
+
+2022-07-21 Alan Modra <amodra@gmail.com>
+
+ PR29370, infinite loop in display_debug_abbrev
+ The PR29370 testcase is a fuzzed object file with multiple
+ .trace_abbrev sections. Multiple .trace_abbrev or .debug_abbrev
+ sections are not a violation of the DWARF standard. The DWARF5
+ standard even gives an example of multiple .debug_abbrev sections
+ contained in groups. Caching and lookup of processed abbrevs thus
+ needs to be done by section and offset rather than base and offset.
+ (Why base anyway?) Or, since section contents are kept, by a pointer
+ into the contents.
+
+ PR 29370
+ * dwarf.c (struct abbrev_list): Replace abbrev_base and
+ abbrev_offset with raw field.
+ (find_abbrev_list_by_abbrev_offset): Delete.
+ (find_abbrev_list_by_raw_abbrev): New function.
+ (process_abbrev_set): Set list->raw and list->next.
+ (find_and_process_abbrev_set): Replace abbrev list lookup with
+ new function. Don't set list abbrev_base, abbrev_offset or next.
+
+2022-07-21 Alan Modra <amodra@gmail.com>
+
+ binutils/dwarf.c: abbrev caching
+ I'm inclined to think that abbrev caching is counter-productive. The
+ time taken to search the list of abbrevs converted to internal form is
+ non-zero, and it's easy to decode the raw abbrevs. It's especially
+ silly to cache empty lists of decoded abbrevs (happens with zero
+ padding in .debug_abbrev), or abbrevs as they are displayed when there
+ is no further use of those abbrevs. This patch stops caching in those
+ cases.
+
+ * dwarf.c (record_abbrev_list_for_cu): Add free_list param.
+ Put abbrevs on abbrev_lists here.
+ (new_abbrev_list): Delete function.
+ (process_abbrev_set): Return newly allocated list. Move
+ abbrev base, offset and size checking to..
+ (find_and_process_abbrev_set): ..here, new function. Handle
+ lookup of cached abbrevs here, and calculate start and end
+ for process_abbrev_set. Return free_list if newly alloc'd.
+ (process_debug_info): Consolidate cached list lookup, new list
+ alloc and processing into find_and_process_abbrev_set call.
+ Free list when not cached.
+ (display_debug_abbrev): Similarly.
+
+2022-07-21 Alan Modra <amodra@gmail.com>
+
+ miscellaneous dwarf.c tidies
+ * dwarf.c: Leading and trailing whitespace fixes.
+ (free_abbrev_list): New function.
+ (free_all_abbrevs): Use the above. Free cu_abbrev_map here too.
+ (process_abbrev_set): Print actual section name on error.
+ (get_type_abbrev_from_form): Add overflow check.
+ (free_debug_memory): Don't free cu_abbrev_map here..
+ (process_debug_info): ..or here. Warn on another case of not
+ finding a neeeded abbrev.
+
+2022-07-21 Alan Modra <amodra@gmail.com>
+
+ PowerPC64: fix build error on 32-bit hosts
+ elf64-ppc.c:11673:33: error: format ‘%lx’ expects argument of type ‘long unsigned int’, but argument 3 has type ‘bfd_vma’ {aka ‘long long unsigned int’} [-Werror=format=]
+ 11673 | fprintf (stderr, "offset = %#lx:", stub_entry->stub_offset);
+ | ~~~^ ~~~~~~~~~~~~~~~~~~~~~~~
+ | | |
+ | | bfd_vma {aka long long unsigned int}
+ | long unsigned int
+ | %#llx
+
+ * elf64-ppc.c (dump_stub): Use BFD_VMA_FMT.
+
+2022-07-21 Kevin Buettner <kevinb@redhat.com>
+
+ Wrap python_write_bytecode with HAVE_PYTHON ifdef
+ This commit fixes a build error on machines lacking python headers
+ and/or libraries.
+
+2022-07-21 GDB Administrator <gdbadmin@sourceware.org>
+
+ Automatic date update in version.in
+
+2022-07-20 Kevin Buettner <kevinb@redhat.com>
+
+ Handle Python 3.11 deprecation of PySys_SetPath and Py_SetProgramName
+ Python 3.11 deprecates PySys_SetPath and Py_SetProgramName. The
+ PyConfig API replaces these and other functions. This commit uses the
+ PyConfig API to provide equivalent functionality while also preserving
+ support for older versions of Python, i.e. those before Python 3.8.
+
+ A beta version of Python 3.11 is available in Fedora Rawhide. Both
+ Fedora 35 and Fedora 36 use Python 3.10, while Fedora 34 still used
+ Python 3.9. I've tested these changes on Fedora 34, Fedora 36, and
+ rawhide, though complete testing was not possible on rawhide due to
+ a kernel bug. That being the case, I decided to enable the newer
+ PyConfig API by testing PY_VERSION_HEX against 0x030a0000. This
+ corresponds to Python 3.10.
+
+ We could try to use the PyConfig API for Python versions as early as 3.8,
+ but I'm reluctant to do this as there may have been PyConfig related
+ bugs in earlier versions which have since been fixed. Recent linux
+ distributions should have support for Python 3.10. This should be
+ more than adequate for testing the new Python initialization code in
+ GDB.
+
+ Information about the PyConfig API as well as the motivation behind
+ deprecating the old interface can be found at these links:
+
+ https://github.com/python/cpython/issues/88279
+ https://peps.python.org/pep-0587/
+ https://docs.python.org/3.11/c-api/init_config.html
+
+ The v2 commit also addresses several problems that Simon found in
+ the v1 version.
+
+ In v1, I had used Py_DontWriteBytecodeFlag in the new initialization
+ code, but Simon pointed out that this global configuration variable
+ will be deprecated in Python 3.12. This version of the patch no longer
+ uses Py_DontWriteBytecodeFlag in the new initialization code.
+ Additionally, both Py_DontWriteBytecodeFlag and Py_IgnoreEnvironmentFlag
+ will no longer be used when building GDB against Python 3.10 or higher.
+ While it's true that both of these global configuration variables are
+ deprecated in Python 3.12, it makes sense to disable their use for
+ gdb builds against 3.10 and higher since those are the versions for
+ which the PyConfig API is now being used by GDB. (The PyConfig API
+ includes different mechanisms for making the same settings afforded
+ by use of the soon-to-be deprecated global configuration variables.)
+
+ Simon also noted that PyConfig_Clear() would not have be called for
+ one of the failure paths. I've fixed that problem and also made the
+ rest of the "bail out" code more direct. In particular,
+ PyConfig_Clear() will always be called, both for success and failure.
+
+ The v3 patch addresses some rebase conflicts related to module
+ initialization . Commit 3acd9a692dd ("Make 'import gdb.events' work")
+ uses PyImport_ExtendInittab instead of PyImport_AppendInittab. That
+ commit also initializes a struct for each module to import. Both the
+ initialization and the call to were moved ahead of the ifdefs to avoid
+ having to replicate (at least some of) the code three times in various
+ portions of the ifdefs.
+
+ Bug: https://sourceware.org/bugzilla/show_bug.cgi?id=28668
+ Bug: https://sourceware.org/bugzilla/show_bug.cgi?id=29287
+
+2022-07-20 Christopher Di Bella <cjdb@google.com>
+
+ gdb/value.c: add several headers to the include list
+ Building GDB currently fails to build with libc++, because libc++ is
+ stricter about which headers "leak" entities they're not guaranteed
+ to support. The following headers have been added:
+
+ * `<iterator>`, to support `std::back_inserter`
+ * `<utility>`, to support `std::move` and `std::swap`
+ * `<vector>`, to support `std::vector`
+
+ Change-Id: Iaeb15057c5fbb43217df77ce34d4e54446dbcf3d
+
+2022-07-20 Pedro Alves <pedro@palves.net>
+
+ Don't stop all threads prematurely after first step of "step N"
+ In all-stop mode, when the target is itself in non-stop mode (like
+ GNU/Linux), if you use the "step N" (or "stepi/next/nexti N") to step
+ a thread a number of times:
+
+ (gdb) help step
+ step, s
+ Step program until it reaches a different source line.
+ Usage: step [N]
+ Argument N means step N times (or till program stops for another reason).
+
+ ... GDB prematurely stops all threads after the first step, and
+ doesn't re-resume them for the subsequent N-1 steps. It's as if for
+ the 2nd and subsequent steps, the command was running with
+ scheduler-locking enabled.
+
+ This can be observed with the testcase added by this commit, which
+ looks like this:
+
+ static pthread_barrier_t barrier;
+
+ static void *
+ thread_func (void *arg)
+ {
+ pthread_barrier_wait (&barrier);
+ return NULL;
+ }
+
+ int
+ main ()
+ {
+ pthread_t thread;
+ int ret;
+
+ pthread_barrier_init (&barrier, NULL, 2);
+
+ /* We run to this line below, and then issue "next 3". That should
+ step over the 3 lines below and land on the return statement. If
+ GDB prematurely stops the thread_func thread after the first of
+ the 3 nexts (and never resumes it again), then the join won't
+ ever return. */
+ pthread_create (&thread, NULL, thread_func, NULL); /* set break here */
+ pthread_barrier_wait (&barrier);
+ pthread_join (thread, NULL);
+
+ return 0;
+ }
+
+ The test hangs and times out without the GDB fix:
+
+ (gdb) next 3
+ [New Thread 0x7ffff7d89700 (LWP 525772)]
+ FAIL: gdb.threads/step-N-all-progress.exp: non-stop=off: target-non-stop=on: next 3 (timeout)
+
+ The problem is a core gdb bug.
+
+ When you do "step/stepi/next/nexti N", GDB internally creates a
+ thread_fsm object and associates it with the stepping thread. For the
+ stepping commands, the FSM's class is step_command_fsm. That object
+ is what keeps track of how many steps are left to make. When one step
+ finishes, handle_inferior_event calls stop_waiting and returns, and
+ then fetch_inferior_event calls the "should_stop" method of the event
+ thread's FSM. The implementation of that method decrements the
+ steps-left counter. If the counter is 0, it returns true and we
+ proceed to presenting the stop to the user. If it isn't 0 yet, then
+ the method returns false, indicating to fetch_inferior_event to "keep
+ going".
+
+ Focusing now on when the first step finishes -- we're in "all-stop"
+ mode, with the target in non-stop mode. When a step finishes,
+ handle_inferior_event calls stop_waiting, which itself calls
+ stop_all_threads to stop everything. I.e., after the first step
+ completes, all threads are stopped, before handle_inferior_event
+ returns. And after that, now in fetch_inferior_event, we consult the
+ thread's thread_fsm::should_stop, which as we've seen, for the first
+ step returns false -- i.e., we need to keep_going for another step.
+ However, since the target is in non-stop mode, keep_going resumes
+ _only_ the current thread. All the other threads remain stopped,
+ inadvertently.
+
+ If the target is in non-stop mode, we don't actually need to stop all
+ threads right after each step finishes, and then re-resume them again.
+ We can instead defer stopping all threads until all the steps are
+ completed.
+
+ So fix this by delaying the stopping of all threads until after we
+ called the FSM's "should_stop" method. I.e., move it from
+ stop_waiting, to handle_inferior_events's callers,
+ fetch_inferior_event and wait_for_inferior.
+
+ New test included. Tested on x86-64 GNU/Linux native and gdbserver.
+
+ Change-Id: Iaad50dcfea4464c84bdbac853a89df92ade6ae01
+
+2022-07-20 Alan Modra <amodra@gmail.com>
+
+ Re: opcodes/arc: Implement style support in the disassembler
+ * arc-dis.c (print_insn_arc): Fix thinko.
+
+2022-07-20 Dmitry Selyutin <ghostmansd@gmail.com>
+
+ gas/symbols: introduce md_resolve_symbol
+ Assuming GMSD is a special operand, marked as O_md1, the code:
+
+ .set VREG, GMSD
+ .set REG, VREG
+ extsw REG, 2
+
+ ...fails upon attempts to resolve the value of the symbol. This happens
+ since machine-dependent values are not handled in the giant op switch.
+ We introduce a custom md_resolve_symbol macro; the ports can use this
+ macro to customize the behavior when resolve_symbol_value hits O_md
+ operand.
+
+2022-07-20 GDB Administrator <gdbadmin@sourceware.org>
+
+ Automatic date update in version.in
+
+2022-07-19 H.J. Lu <hjl.tools@gmail.com>
+
+ x86: Disallow invalid relocations against protected symbols
+ Since glibc 2.36 will issue warnings for copy relocation against
+ protected symbols and non-canonical reference to canonical protected
+ functions, change the linker to always disallow such relocations.
+
+ bfd/
+
+ * elf32-i386.c (elf_i386_scan_relocs): Remove check for
+ elf_has_indirect_extern_access.
+ * elf64-x86-64.c (elf_x86_64_scan_relocs): Likewise.
+ (elf_x86_64_relocate_section): Remove check for
+ elf_has_no_copy_on_protected.
+ * elfxx-x86.c (elf_x86_allocate_dynrelocs): Check for building
+ executable instead of elf_has_no_copy_on_protected.
+ (_bfd_x86_elf_adjust_dynamic_symbol): Disallow copy relocation
+ against non-copyable protected symbol.
+ * elfxx-x86.h (SYMBOL_NO_COPYRELOC): Remove check for
+ elf_has_no_copy_on_protected.
+
+ ld/
+
+ * testsuite/ld-i386/i386.exp: Expect linker error for PR ld/17709
+ test.
+ * testsuite/ld-i386/pr17709.rd: Removed.
+ * testsuite/ld-i386/pr17709.err: New file.
+ * testsuite/ld-x86-64/pr17709.rd: Removed.
+ * testsuite/ld-x86-64/pr17709.err: New file.
+ * testsuite/ld-x86-64/pr28875-func.err: Updated.
+ * testsuite/ld-x86-64/x86-64.exp: Expect linker error for PR
+ ld/17709 test. Add tests for function pointer against protected
+ function.
+
+2022-07-19 Fangrui Song <i@maskray.me>
+
+ x86: Make protected symbols local for -shared
+ Call _bfd_elf_symbol_refs_local_p with local_protected==true. This has
+ 2 noticeable effects for -shared:
+
+ * GOT-generating relocations referencing a protected data symbol no
+ longer lead to a GLOB_DAT (similar to a hidden symbol).
+ * Direct access relocations (e.g. R_X86_64_PC32) no longer has the
+ confusing diagnostic below.
+
+ __attribute__((visibility("protected"))) void *foo() {
+ return (void *)foo;
+ }
+
+ // gcc -fpic -shared -fuse-ld=bfd
+ relocation R_X86_64_PC32 against protected symbol `foo' can not be used when making a shared object
+
+ The new behavior matches arm, aarch64 (commit
+ 83c325007c5599fa9b60b8d5f7b84842160e1d1b), and powerpc ports, and other
+ linkers: gold and ld.lld.
+
+ Note: if some code tries to use direct access relocations to take the
+ address of foo, the pointer equality will break, but the error should be
+ reported on the executable link, not on the innocent shared object link.
+ glibc 2.36 will give a warning at relocation resolving time.
+
+ With this change, `#define elf_backend_extern_protected_data 1` is no
+ longer effective. Just remove it.
+
+ Remove the test "Run protected-func-1 without PIE" since -fno-pic
+ address taken operation in the executable doesn't work with protected
+ symbol in a shared object by default. Similarly, remove
+ protected-data-1a and protected-data-1b. protected-data-1b can be made
+ working by removing HAVE_LD_PIE_COPYRELOC from GCC
+ (https://sourceware.org/pipermail/gcc-patches/2022-June/596678.html).
+
+2022-07-19 Luis Machado <luis.machado@arm.com>
+
+ Reformat gdbarch-components.py to fix deviations
+ Reformat to make sure we have a clean file with no deviations
+ from the expected python code format.
+
+2022-07-19 Luis Machado <luis.machado@arm.com>
+
+ [AArch64] MTE corefile support
+ Teach GDB how to dump memory tags for AArch64 when using the gcore command
+ and how to read memory tag data back from a core file generated by GDB
+ (via gcore) or by the Linux kernel.
+
+ The format is documented in the Linux Kernel documentation [1].
+
+ Each tagged memory range (listed in /proc/<pid>/smaps) gets dumped to its
+ own PT_AARCH64_MEMTAG_MTE segment. A section named ".memtag" is created for each
+ of those segments when reading the core file back.
+
+ To save a little bit of space, given MTE tags only take 4 bits, the memory tags
+ are stored packed as 2 tags per byte.
+
+ When reading the data back, the tags are unpacked.
+
+ I've added a new testcase to exercise the feature.
+
+ Build-tested with --enable-targets=all and regression tested on aarch64-linux
+ Ubuntu 20.04.
+
+ [1] Documentation/arm64/memory-tagging-extension.rst (Core Dump Support)
+
+2022-07-19 Luis Machado <luis.machado@arm.com>
+
+ [AArch64] Support AArch64 MTE memory tag dumps in core files
+ The Linux kernel can dump memory tag segments to a core file, one segment
+ per mapped range. The format and documentation can be found in the Linux
+ kernel tree [1].
+
+ The following patch adjusts bfd and binutils so they can handle this new
+ segment type and display it accordingly. It also adds code required so GDB
+ can properly read/dump core file data containing memory tags.
+
+ Upon reading, each segment that contains memory tags gets mapped to a
+ section named "memtag". These sections will be used by GDB to lookup the tag
+ data. There can be multiple such sections with the same name, and they are not
+ numbered to simplify GDB's handling and lookup.
+
+ There is another patch for GDB that enables both reading
+ and dumping of memory tag segments.
+
+ Tested on aarch64-linux Ubuntu 20.04.
+
+ [1] Documentation/arm64/memory-tagging-extension.rst (Core Dump Support)
+
+2022-07-19 Luis Machado <luis.machado@arm.com>
+
+ [AArch64] Fix testcase compilation failure
+ Newer distros carry newer headers that contains MTE definitions. Account
+ for that fact in the MTE testcases (gdb.arch/aarch64-mte.exp) and define
+ constants conditionally to prevent compilation failures.
+
+2022-07-19 H.J. Lu <hjl.tools@gmail.com>
+
+ ld: Pass -nostdlib to compiler with -r
+ Pass -nostdlib to compiler with -r to avoid unnecessary .o file and
+ libraries.
+
+ PR ld/29377
+ * testsuite/ld-elf/linux-x86.exp: Pass -nostdlib with -r.
+
+2022-07-19 H.J. Lu <hjl.tools@gmail.com>
+
+ x86: Properly check invalid relocation against protected symbol
+ Only check invalid relocation against protected symbol defined in shared
+ object.
+
+ bfd/
+
+ PR ld/29377
+ * elf32-i386.c (elf_i386_scan_relocs): Only check invalid
+ relocation against protected symbol defined in shared object.
+ * elf64-x86-64.c (elf_x86_64_scan_relocs): Likewise.
+
+ ld/
+
+ PR ld/29377
+ * testsuite/ld-elf/linux-x86.exp: Run PR ld/29377 tests.
+ * testsuite/ld-elf/pr29377a.c: New file.
+ * testsuite/ld-elf/pr29377b.c: Likewise.
+
+2022-07-19 GDB Administrator <gdbadmin@sourceware.org>
+
+ Automatic date update in version.in
+
+2022-07-18 Vladimir Mezentsev <vladimir.mezentsev@oracle.com>
+
+ gprofng: link libgprofng.so against -lpthread
+ gprofng/ChangeLog
+ 2022-07-15 Vladimir Mezentsev <vladimir.mezentsev@oracle.com>
+
+ PR gprofng/29364
+ * src/Makefile.am (libgprofng_la_LIBADD): Add -lpthread.
+ * src/Makefile.in: Rebuild.
+
+2022-07-18 Vladimir Mezentsev <vladimir.mezentsev@oracle.com>
+
+ gprofng: fix regression in build and a race condition in autoreconf
+ gprofng/ChangeLog
+ 2022-07-14 Vladimir Mezentsev <vladimir.mezentsev@oracle.com>
+
+ PR gprofng/29338
+ * libcollector/configure.ac (AC_CONFIG_HEADERS): Fix a race condition.
+ * libcollector/configure: Rebuild.
+ * libcollector/Makefile.in: Rebuild.
+ * common/config.h.in: Rebuild.
+ * common/lib-config.h.in: Created by autoreconf.
+
+2022-07-18 Tom Tromey <tromey@adacore.com>
+
+ Add gdb.free_objfile event registry
+ Currently, Python code can use event registries to detect when gdb
+ loads a new objfile, and when gdb clears the objfile list. However,
+ there's no way to detect the removal of an objfile, say when the
+ inferior calls dlclose.
+
+ This patch adds a gdb.free_objfile event registry and arranges for an
+ event to be emitted in this case.
+
+2022-07-18 Pedro Alves <pedro@palves.net>
+
+ Put gdb.base/bt-on-fatal-signal.exp GDB cores in output dir
+ I noticed that gdb.base/bt-on-fatal-signal.exp was contributing four
+ core files to the count of unexpected core files:
+
+ $ make check TESTS="gdb.base/bt-on-fatal-signal.exp"
+
+ === gdb Summary ===
+
+ # of unexpected core files 4
+ # of expected passes 21
+
+ These are GDB core dumps. They are expected, however, because the
+ whole point of the testcase is to crash GDB with a signal.
+
+ Make GDB change its current directory to the output dir just before
+ crashing, so that the core files end up there. The result is now:
+
+ === gdb Summary ===
+
+ # of expected passes 25
+
+ and:
+
+ $ find . -name "core.*"
+ ./testsuite/outputs/gdb.base/bt-on-fatal-signal/core.gdb.1676506.nelson.1657727692
+ ./testsuite/outputs/gdb.base/bt-on-fatal-signal/core.gdb.1672585.nelson.1657727671
+ ./testsuite/outputs/gdb.base/bt-on-fatal-signal/core.gdb.1674833.nelson.1657727683
+ ./testsuite/outputs/gdb.base/bt-on-fatal-signal/core.gdb.1673709.nelson.1657727676
+
+ (Note the test is skipped at the top if on a remote host.)
+
+ Change-Id: I79e4fb2e91330279c7a509930b1952194a72e85a
+
+2022-07-18 Tom Tromey <tromey@adacore.com>
+
+ Remove array typedef assumption for Ada
+ Currently the Ada code assumes that it can distinguish between a
+ multi-dimensional array and an array of arrays by looking for an
+ intervening typedef -- that is, for an array of arrays, there will be
+ a typedef wrapping the innermost array type.
+
+ A recent compiler change removes this typedef, which causes a gdb
+ failure in the internal AdaCore test suite.
+
+ This patch handles this case by checking whether the array type in
+ question has a name.
+
+2022-07-18 Tom Tromey <tromey@adacore.com>
+
+ Remove manual lifetime management from cli_interp
+ cli_interp manually manages its cli_out object. This patch changes it
+ to use a unique_ptr, and also changes cli_uiout to be a private
+ member.
+
+ Remove cli_out_new
+ cli_out_new is just a small wrapper around 'new'. This patch removes
+ it, replacing it with uses of 'new' instead.
+
+ Replace input_interactive_p with a method
+ This replaces the global input_interactive_p function with a new
+ method ui::input_interactive_p.
+
+ Remove ui_register_input_event_handler
+ This patch removes ui_register_input_event_handler and
+ ui_unregister_input_event_handler, replacing them with methods on
+ 'ui'. It also changes gdb to use these methods everywhere, rather
+ than sometimes reaching in to the ui to manage the file descriptor
+ directly.
+
+2022-07-18 Claudiu Zissulescu <claziss@gmail.com>
+
+ opcodes/arc: Implement style support in the disassembler
+ Update the ARC disassembler to supply style information to the
+ disassembler output. The output formatting remains unchanged.
+
+ opcodes/ChangeLog:
+ * disassemble.c (disassemble_init_for_target): Set
+ created_styled_output for ARC based targets.
+ * arc-dis.c (find_format_from_table): Use fprintf_styled_ftype
+ instead of fprintf_ftype throughout.
+ (find_format): Likewise.
+ (print_flags): Likewise.
+ (print_insn_arc): Likewise.
+
+2022-07-18 Claudiu Zissulescu <claziss@synopsys.com>
+
+ arc: Update missing cipher.
+ The ciphers 5,7, and 9 are missing when parsing an assembly
+ instruction leading to errors when those ciphers are
+ used.
+
+ gas/config
+ * tc-arc.c (md_assembly): Update strspn string with the
+ missing ciphers.
+
+2022-07-18 Tom de Vries <tdevries@suse.de>
+
+ [gdb/testsuite] Remove duplicate of supports_gnuc
+ In commit 9d9dd861e98 ("[gdb/testsuite] Fix regression in
+ step-indirect-call-thunk.exp with gcc 7") I accidentally committed a duplicate
+ of supports_gnuc, which caused:
+ ...
+ DUPLICATE: gdb.base/gdb-caching-proc.exp: supports_gnuc: consistency
+ ...
+
+ Fix this by removing the duplicate.
+
+ Tested on x86_64-linux.
+
+2022-07-18 Andrew Burgess <aburgess@redhat.com>
+
+ gdb/python: look for python, then python 3 at configure time
+ It is possible that a system might have a python3 executable, but no
+ python executable. For example, on my Fedora system the python2
+ package provides /usr/bin/python2, the python3 package provides
+ /usr/bin/python3, and the python-unversioned-command package provides
+ /usr/bin/python, which picks between python2 and python3.
+
+ It is quite possible to only have python3 available on a system.
+
+ Currently, when GDB configures, it looks for a 'python' executable.
+ If non is found then GDB will be built without python support. Or the
+ user needs to configure using --with-python=/usr/bin/python3.
+
+ This commit updates GDB's configure.ac script to first look for
+ 'python', and then 'python3'. Now, on a system that only has a
+ python3 executable, GDB will automatically find, and use that in order
+ to provide python support, no user supplied configure arguments are
+ needed.
+
+ I've tested this on my local machine by removing the
+ python-unversioned-command package, confirming that there is no longer
+ a 'python' executable in my $PATH, and then rebuilding GDB from
+ scratch. GDB with this patch has python support.
+
+2022-07-18 Jan Beulich <jbeulich@suse.com>
+
+ x86: correct VMOVSH attributes
+ Both forms were missing VexW0 (thus allowing Evex.W=1 to be encoded by
+ suitable means, which would cause #UD). The memory operand form further
+ was using the wrong Masking value, thus allowing zeroing-masking to be
+ encoded for the store form (which would again cause #UD).
+
+ x86: re-order insn template fields
+ This saves quite a number of shift instructions: The "operands" field
+ can now be retrieved by just masking (no shift), and extracting the
+ "extension_opcode" field now only requires a (signed) right shift, with
+ no prereq left one. (Of course there may be architectures where, in a
+ cross build, there might be no difference at all, e.g. when there are
+ suitable bitfield extraction insns.)
+
+2022-07-18 Tom de Vries <tdevries@suse.de>
+
+ [gdbsupport] Improve thread scheduling in parallel_for_each
+ When running a task using parallel_for_each, we get the following
+ distribution:
+ ...
+ Parallel for: n_elements: 7271
+ Parallel for: minimum elements per thread: 10
+ Parallel for: elts_per_thread: 1817
+ Parallel for: elements on worker thread 0 : 1817
+ Parallel for: elements on worker thread 1 : 1817
+ Parallel for: elements on worker thread 2 : 1817
+ Parallel for: elements on worker thread 3 : 0
+ Parallel for: elements on main thread : 1820
+ ...
+
+ Note that there are 4 active threads, and scheduling elts_per_thread on each
+ of those handles 4 * 1817 == 7268, leaving 3 "left over" elements.
+
+ These leftovers are currently handled in the main thread.
+
+ That doesn't seem to matter much for this example, but for say 10 threads and
+ 99 elements, you'd have 9 threads handling 9 elements and 1 thread handling 18
+ elements.
+
+ Instead, distribute the left over elements over the worker threads, such that
+ we have:
+ ...
+ Parallel for: elements on worker thread 0 : 1818
+ Parallel for: elements on worker thread 1 : 1818
+ Parallel for: elements on worker thread 2 : 1818
+ Parallel for: elements on worker thread 3 : 0
+ Parallel for: elements on main thread : 1817
+ ...
+
+ Tested on x86_64-linux.
+
+2022-07-18 Tom de Vries <tdevries@suse.de>
+
+ [gdb/testsuite] Allow override of ASAN_OPTIONS in lib/gdb.exp
+ Use set_sanitizer_default for ASAN_OPTIONS in lib/gdb.exp.
+
+ This allows us to override the default detect_leaks=0 setting, by manually
+ doing:
+ ...
+ $ export ASAN_OPTIONS=detect_leaks=1
+ $ make check
+ ...
+
+ Tested on x86_64-linux, by building with -fsanitize=address and running
+ test-case gdb.dwarf2/gdb-add-index.exp with and without
+ "export ASAN_OPTIONS=detect_leaks=1".
+
+2022-07-18 Tom de Vries <tdevries@suse.de>
+
+ [gdb/testsuite] Fix regression in step-indirect-call-thunk.exp with gcc 7
+ Since commit 43127ae5714 ("Fix gdb.base/step-indirect-call-thunk.exp") I run
+ into:
+ ...
+ gdb compile failed, gcc: error: unrecognized command line option \
+ '-fcf-protection=none'; did you mean '-flto-partition=none'?
+ UNTESTED: gdb.base/step-indirect-call-thunk.exp: failed to prepare
+ ...
+
+ The problem is that -fcf-protection is supported starting gcc 8, but I'm using
+ system gcc 7.5.0.
+
+ Fix this by only adding -fcf-protection=none for gcc 8 and later.
+
+ Tested on x86_64-linux, with gcc 7.5.0, 8.2.1 and 12.1.1.
+
+2022-07-18 Tom de Vries <tdevries@suse.de>
+
+ [gdb/testsuite] Fix gdb.arch/i386-mpx.exp
+ Since commit c4a3dbaf113 ("Expose current 'print' settings to Python") we
+ have:
+ ...
+ (gdb) print /x $bnd0 = {0x10, 0x20}^M
+ $22 = {lbound = 0x10, ubound = 0x20} : size 0x11^M
+ (gdb) FAIL: gdb.arch/i386-mpx.exp: verify size for bnd0
+ ...
+
+ The regexp in the test-case expects "size 17".
+
+ Fix this by updating the regexp.
+
+ Tested on x86_64-linux.
+
+2022-07-18 Tom de Vries <tdevries@suse.de>
+
+ [gdbsupport] Add parallel_for_each_debug
+ Add a parallel_for_each_debug variable, set to false by default.
+
+ With an a.out compiled from hello world, we get with
+ parallel_for_each_debug == true:
+ ...
+ $ gdb -q -batch a.out -ex start
+ ...
+ Parallel for: n_elements: 7271
+ Parallel for: minimum elements per thread: 10
+ Parallel for: elts_per_thread: 1817
+ Parallel for: elements on worker thread 0 : 1817
+ Parallel for: elements on worker thread 1 : 1817
+ Parallel for: elements on worker thread 2 : 1817
+ Parallel for: elements on worker thread 3 : 0
+ Parallel for: elements on main thread : 1820
+
+ Temporary breakpoint 1, main () at /home/vries/hello.c:6
+ 6 printf ("hello\n");
+ ...
+
+ Tested on x86_64-linux.
+
+2022-07-18 GDB Administrator <gdbadmin@sourceware.org>
+
+ Automatic date update in version.in
+
+2022-07-17 GDB Administrator <gdbadmin@sourceware.org>
+
+ Automatic date update in version.in
+
+2022-07-16 GDB Administrator <gdbadmin@sourceware.org>
+
+ Automatic date update in version.in
+
+2022-07-15 Aaron Merey <amerey@redhat.com>
+
+ gdb-add-index always generates an error when libdebuginfod wasn't compiled in
+ gdb-add-index runs gdb with -iex 'set debuginfod enabled off'. If gdb
+ is not compiled against libdebuginfod this causes an unnecessary error
+ message to be printed to stderr indicating that gdb was not built with
+ debuginfod support.
+
+ Fix this by changing the 'set debuginfod enabled off' command to a
+ no-op when gdb isn't built with libdebuginfod.
+
+2022-07-15 Bruno Larsen <blarsen@redhat.com>
+
+ gdb/testsuite: modernize gdb.base/maint.exp
+ gdb.base/maint.exp was using several gdb_expect statements, probably
+ because this test case predates the existance of gdb_test_multiple. This
+ commit updates the test case to use gdb_test_multiple, making it more
+ resilient to internal errors and such.
+
+ The only gdb_expect left in the testcase is one that specifically looks
+ for an internal error being triggered as a PASS.
+
+2022-07-15 Tom Tromey <tromey@adacore.com>
+
+ Add 'nibbles' to gdb.print_options
+ When I rebased and updated the print_options patch, I forgot to update
+ print_options to add the new 'nibbles' feature to the result. This
+ patch fixes the oversight. I'm checking this in.
+
+2022-07-15 Carl Love <cel@us.ibm.com>
+
+ PowerPC: Add support for IEEE 128-bit format.
+ The test gdb.base/infcall-nested-structs-c.exp fails on a gdb assert
+ in function ppc64_sysv_abi_return_value in file gdb/ppc-sysv-tdep.c. The
+ assert is due to the missing IEEE 128-bit support in file
+ gdb/ppc-sysv-tdep.c.
+
+ The IBM long double was the initial float 128-bit support added by IBM
+ The IEEE 128-bit support, which is similar IBM long double support, was
+ made the default starting with GCC 12. The floating point format
+ differences include the number of bits used to encode the exponent
+ and significand. Also, IBM long double values are passed in a pair of
+ floating point registers. The IEEE 128-bit value is passed in a single
+ vector register.
+
+ This patch fixes the gdb_assert (ok); in function
+ ppc64_sysv_abi_return_value in gdb/ppc-sysv-tdep.c by adding IEEE FLOAT
+ 128-bit type support for PowerPC.
+
+ The patch has been tested on Power 10, ELFv2. It fixes the following list
+ of regression failures on Power 10:
+
+ gdb.base/infcall-nested-structs-c.exp 192
+ gdb.base/infcall-nested-structs-c++.exp 76
+ gdb.base/structs.exp 9
+
+ The patch has been tested on Power 8 BE which is ELFv1.
+
+2022-07-15 Tom Tromey <tromey@adacore.com>
+
+ Add 'summary' mode to Value.format_string
+ This adds a 'summary' mode to Value.format_string and to
+ gdb.print_options. For the former, it lets Python code format values
+ using this mode. For the latter, it lets a printer potentially detect
+ if it is being called in a backtrace with 'set print frame-arguments'
+ set to 'scalars'.
+
+ I considered adding a new mode here to let a pretty-printer see
+ whether it was being called in a 'backtrace' context at all, but I'm
+ not sure if this is really desirable.
+
+2022-07-15 Tom Tromey <tromey@adacore.com>
+
+ Expose current 'print' settings to Python
+ PR python/17291 asks for access to the current print options. While I
+ think this need is largely satisfied by the existence of
+ Value.format_string, it seemed to me that a bit more could be done.
+
+ First, while Value.format_string uses the user's settings, it does not
+ react to temporary settings such as "print/x". This patch changes
+ this.
+
+ Second, there is no good way to examine the current settings (in
+ particular the temporary ones in effect for just a single "print").
+ This patch adds this as well.
+
+ Bug: https://sourceware.org/bugzilla/show_bug.cgi?id=17291
+
+2022-07-15 Carl Love <cel@us.ibm.com>
+
+ PowerPC: fix for gdb.base/eh_return.exp
+ Disable the Traceback Table generation on PowerPC for this test. The
+ Traceback Table consists of a series of bit fields to indicate things like
+ the Traceback Table version, language, and specific information about the
+ function. The Traceback Table is generated following the end of the code
+ for every function by default. The Traceback Table is defined in the
+ PowerPC ELF ABI and is intended to support debuggers and exception
+ handlers. The Traceback Table is displayed in the disassembly of functions
+ by default and is part of the function length. The table is typically
+ interpreted by the disassembler as data represented by .long xxx entries.
+
+ Generation of the Traceback Table is disabled in this test using the
+ PowerPC specific gcc compiler option -mtraceback=no, the xlc option
+ additional_flags-qtable=none and the clang optons
+ -mllvm -xcoff-traceback-table=false. Disabling the Traceback Table
+ generation in this test results in the gdb_test_multiple statement
+ correctly locating the address of the bclr instruction before the statement
+ "End of assembler dump." in the disassembly output.
+
+2022-07-15 Tom Tromey <tromey@adacore.com>
+
+ Run 'black' on gdb
+ Running 'black' on gdb fixed a couple of small issues. This patch is
+ the result.
+
+2022-07-15 GDB Administrator <gdbadmin@sourceware.org>
+
+ Automatic date update in version.in
+
+2022-07-14 Tom de Vries <tdevries@suse.de>
+
+ [gdb/symtab] Fix data race in cooked_index_functions::expand_symtabs_matching
+ When building gdb with -fsanitize-threads and running test-case
+ gdb.ada/char_enum_unicode.exp, I run into:
+ ...
+ WARNING: ThreadSanitizer: data race (pid=21301)^M
+ Write of size 8 at 0x7b2000008080 by main thread:^M
+ #0 free <null> (libtsan.so.2+0x4c5e2)^M
+ #1 _dl_close_worker <null> (ld-linux-x86-64.so.2+0x4b7b)^M
+ #2 convert_between_encodings() charset.c:584^M
+ ...
+ #21 cooked_index_functions::expand_symtabs_matching() read.c:18606
+ ...
+
+ This is fixed by making cooked_index_functions::expand_symtabs_matching wait
+ for the cooked index finalization to be done.
+
+ Tested on x86_64-linux.
+
+ https://sourceware.org/bugzilla/show_bug.cgi?id=29311
+ https://sourceware.org/bugzilla/show_bug.cgi?id=29286
+
+2022-07-14 Tom de Vries <tdevries@suse.de>
+
+ [gdbsupport] Add sequential_for_each
+ Add a sequential_for_each alongside the parallel_for_each, which can be used
+ as a drop-in replacement.
+
+ This can be useful when debugging multi-threading behaviour, and you want to
+ limit multi-threading in a fine-grained way.
+
+ Tested on x86_64-linux, by using it instead of the parallel_for_each in
+ dwarf2_build_psymtabs_hard.
+
+2022-07-14 Tiezhu Yang <yangtiezhu@loongson.cn>
+
+ gdb: Document floating-point support for LoongArch
+ Update NEWS and gdb.texinfo to document floating-point support
+ for LoongArch.
+
+2022-07-14 Tom de Vries <tdevries@suse.de>
+
+ [gdb/build] Fix gdb build with gcc 4.8.5
+ When building gdb with gcc 4.8.5, we run into:
+ ...
+ In file included from /usr/include/c++/4.8/future:43:0,
+ from gdbsupport/thread-pool.h:30,
+ from gdb/dwarf2/cooked-index.h:33,
+ from gdb/dwarf2/read.h:26,
+ from gdb/dwarf2/abbrev-cache.c:21:
+ /usr/include/c++/4.8/atomic: In instantiation of \
+ ‘_Tp std::atomic<_Tp>::load(std::memory_order) const [with _Tp = \
+ packed<dwarf_unit_type, 1ul>; std::memory_order = std::memory_order]’:
+ gdb/dwarf2/read.h:332:44: required from here
+ /usr/include/c++/4.8/atomic:208:13: error: no matching function for call to \
+ ‘packed<dwarf_unit_type, 1ul>::packed()’
+ _Tp tmp;
+ ^
+ ...
+
+ Fix this by adding the default constructor for packed.
+
+ Tested on x86_64-linux, with gdb build with gcc 4.8.5.
+
+2022-07-14 Tom de Vries <tdevries@suse.de>
+
+ [gdb/symtab] Make per_cu->m_lang atomic
+ When building gdb with -fsanitize=thread and running test-case
+ gdb.dwarf2/inlined_subroutine-inheritance.exp, we run into a data race
+ between:
+ ...
+ Read of size 1 at 0x7b2000003010 by thread T4:
+ #0 packed<language, 1ul>::operator language() const packed.h:54
+ #1 dwarf2_per_cu_data::set_lang(language) read.h:363
+ ...
+ and:
+ ...
+ Previous write of size 1 at 0x7b2000003010 by main thread:
+ #0 dwarf2_per_cu_data::set_lang(language) read.h:365
+ ...
+
+ Fix this by making per_cu->m_lang atomic.
+
+ Tested on x86_64-linux.
+
+ Bug: https://sourceware.org/bugzilla/show_bug.cgi?id=29286
+
+2022-07-14 Tom de Vries <tdevries@suse.de>
+
+ [gdb/symtab] Make per_cu->unit_type atomic
+ With gdb with -fsanitize=thread and test-case gdb.ada/array_bounds.exp, I run
+ into a data race between:
+ ...
+ Read of size 1 at 0x7b2000025f0f by main thread:
+ #0 packed<dwarf_unit_type, 1ul>::operator dwarf_unit_type() const packed.h:54
+ #1 dwarf2_per_cu_data::set_unit_type(dwarf_unit_type) read.h:339
+ ...
+ and:
+ ...
+ Previous write of size 1 at 0x7b2000025f0f by thread T3:
+ #0 dwarf2_per_cu_data::set_unit_type(dwarf_unit_type) read.h:341
+ ...
+
+ Fix this by making per_cu->unit_type atomic.
+
+ Tested on x86_64-linux.
+
+ Bug: https://sourceware.org/bugzilla/show_bug.cgi?id=29286
+
+2022-07-14 Tom de Vries <tdevries@suse.de>
+
+ [gdb/symtab] Fix data race in ~charset_vector
+ When doing:
+ ...
+ $ gdb ./outputs/gdb.ada/char_enum_unicode/foo -batch -ex "break foo.adb:26"
+ ...
+ with a gdb build with -fsanitize=thread I run into a data race:
+ ...
+ WARNING: ThreadSanitizer: data race (pid=30917)
+ Write of size 8 at 0x7b0400004070 by main thread:
+ #0 free <null> (libtsan.so.2+0x4c5e2)
+ #1 xfree<char> gdbsupport/gdb-xfree.h:37 (gdb+0x650f17)
+ #2 charset_vector::clear() gdb/charset.c:703 (gdb+0x651354)
+ #3 charset_vector::~charset_vector() gdb/charset.c:697 (gdb+0x6512d3)
+ #4 <null> <null> (libtsan.so.2+0x32643)
+ #5 captured_main_1 gdb/main.c:1310 (gdb+0xa3975a)
+ ...
+
+ The problem is that we're freeing the charset_vector elements in the destructor,
+ which may still be used by a worker thread.
+
+ Fix this by not freeing the charset_vector elements in the destructor.
+
+ Tested on x86_64-linux.
+
+ Bug: https://sourceware.org/bugzilla/show_bug.cgi?id=29311
+
+2022-07-14 Alan Modra <amodra@gmail.com>
+
+ Re: PowerPC: implement md_operand to parse register names
+ I meant to make this change before committing, to let compilers know
+ the code on the false branch of md_parse_name is dead.
+
+ * config/tc-ppc.c (ppc_parse_name): Return void.
+ * config/tc-ppc.h (md_parse_name): Always true.
+ (ppc_parse_name): Update prototype.
+
+2022-07-14 Alan Modra <amodra@gmail.com>
+
+ PowerPC: implement md_operand to parse register names
+ Allows register names to appear in symbol assignments, so for example
+ tocp = %r2
+ mr %r3,tocp
+ now assembles.
+
+ * gas/config/tc-ppc.c (REG_NAME_CNT): Delete, replace uses with
+ ARRAY_SIZE.
+ (register_name): Rename to..
+ (md_operand): ..this. Only handle %reg.
+ (cr_names): Rename to..
+ (cr_cond): ..this. Just keep conditions.
+ (ppc_parse_name): Add mode param. Search both cr_cond and
+ pre_defined_registers. Handle absolute and register symbol
+ values here rather than in expr.c:operand().
+ (md_assemble): Don't special case register name matching in
+ operands, except to set cr_operand as appropriate.
+ * gas/config/tc-ppc.h (md_operand): Don't define.
+ (md_parse_name, ppc_parse_name): Update.
+ * read.c (pseudo_set): Copy over entire O_register value.
+ * testsuite/gas/ppc/regsyms.d.
+ * testsuite/gas/ppc/regsyms.s: New test.
+ * testsuite/gas/ppc/ppc.exp: Run it.
+
+2022-07-14 GDB Administrator <gdbadmin@sourceware.org>
+
+ Automatic date update in version.in
+
+2022-07-13 Pedro Alves <pedro@palves.net>
+
+ Tighten gdb.threads/no-unwaited-for-left.exp regexps
+ A WIP version of a patch
+ (https://sourceware.org/pipermail/gdb-patches/2022-June/190202.html)
+ resulted in a bug that went unnoticed by the testuite, like so:
+
+ (gdb) PASS: gdb.threads/no-unwaited-for-left.exp: enable scheduler-locking, for main thread
+ continue
+ Continuing.
+ [New Thread 1251861.1251861]
+ No unwaited-for children left.
+ (gdb) PASS: gdb.threads/no-unwaited-for-left.exp: continue stops when the main thread exits
+ info threads
+ Id Target Id Frame
+ 3 Thread 1251861.1251863 "no-unwaited-for" __pthread_clockjoin_ex (threadid=140737351558976, thread_return=0x0, clockid=<optimized out>, abstime=<optimized out>, block=<optimized out>) at pthread_join_common.c:145
+ 4 Thread 1251861.1251861 "no-unwaited-for" <unavailable> in ?? ()
+
+ The current thread <Thread ID 1> has terminated. See `help thread'.
+ (gdb) PASS: gdb.threads/no-unwaited-for-left.exp: only thread 3 left, main thread terminated
+
+ Somehow, above, GDB re-added the zombie leader back before printing
+ "No unwaited-for children left.". The "only thread 3 left, main
+ thread terminated" test should have caught this, but didn't. That is
+ because the test's regexp has a ".*" after the part that matches
+ thread 3. This commit tightens that regexp to catch such a bug. It
+ also tightens the "only main thread left, thread 2 terminated" test's
+ regexp in the same way.
+
+ Change-Id: I8744f327a0aa0e2669d1ddda88247e99b91cefff
+
+2022-07-13 Carl Love <cel@us.ibm.com>
+
+ Fix for gdb.base/stap-probe.c
+ On PowePC, the test fails on a compile error:
+
+ /../binutils-gdb-current/gdb/testsuite/gdb.base/stap-probe.c:107:1: error: expected '=', ',', ';', 'asm' or 'attribute' before 'use_xmm_reg'
+ 107 | use_xmm_reg (int val)
+ | ^~~~~~~~~~~
+
+ Where the source code for stap-probe.c is:
+
+ static const char * __attribute__((noinline)) ATTRIBUTE_NOCLONE
+ use_xmm_reg (int val) <-- line 107
+ {
+ ...
+
+ The issue is the ATTRIBUTE_NOCLONE is not defined as an attribute as
+ expected. The #define for ATTRIBUTE_NOCLONE can be found in
+ ../lib/attributes.h.
+
+ This patch adds the missing include statement for the definition of
+ ATTRIBUTE_NOCLONE.
+
+ The patch has been tested and verified on a Power10 system.
+
+2022-07-13 Carl Love <cel@us.ibm.com>
+
+ Add PowerPC support to gdb.cp/call-method-register.cc
+ This patch adds the needed define ASM_REG for PowerPC.
+
+ The patch was run on a Power 10 system. The gdb Summary for the run lists
+ 2 expected passes, no unexpected failures or untested testcases.
+
+ Please let me know if this patch is acceptable for mainline.
+
+ Carl Love
+
+2022-07-13 Carl Love <cel@us.ibm.com>
+
+ Fix gdb.base/step-indirect-call-thunk.exp
+ Due to recent changes in the default value of -fcf-protection for gcc, the
+ test gdb.base/step-indirect-call-thunk.exp fails on Intel X86-64 with the
+ error:
+
+ Executing on host: gcc -fno-stack-protector -fdiagnostics-color=never
+ -mindirect-branch=thunk -mfunction-return=thunk -c -g
+ -o /.../gdb/testsuite/outputs/gdb.base/step-indirect-call-thunk/step-indirect-call-thunk0.o
+ /.../gdb/testsuite/gdb.base/step-indirect-call-thunk.c
+ (timeout = 300) builtin_spawn -ignore SIGHUP gcc -fno-stack-protector
+ -fdiagnostics-color=never -mindirect-branch=thunk -mfunction-return=thunk -c
+ -g -o /.../gdb/testsuite/outputs/gdb.base/step-indirect-call-thunk/step-indirect-call-thunk0.o
+ /.../binutils-gdb-current/gdb/testsuite/gdb.base/step-indirect-call-thunk.c
+ /.../gdb/testsuite/gdb.base/step-indirect-call-thunk.c:
+ In function 'inc': /.../gdb/testsuite/gdb.base/step-indirect-call-thunk.c:
+ 22:1: error: '-mindirect-branch' and '-fcf-protection' are not compatible
+ 22 | { /* inc.1 */
+
+ As stated in the error message the default "-fcf-protection" and
+ "-mindirect-branch' are in compatible. The fcf-protection argument needs
+ to be "-fcf-protection=none" for the test to compile on Intel.
+
+ The gcc command line "-mindirect-branch' is an Intel specific and will give
+ an error on other platforms. A check for X86 is added so the test will
+ only run on X86 platforms.
+
+ The patch has been tested and verified on Power 10 and Intel X86-64 systems
+ with no regressions.
+
+2022-07-13 Pedro Alves <pedro@palves.net>
+
+ Fix "until LINE" in main, when "until" runs into longjmp
+ With a test like this:
+
+ 1 #include <dlfcn.h>
+ 2 int
+ 3 main ()
+ 4 {
+ 5 dlsym (RTLD_DEFAULT, "FOO");
+ 6 return 0;
+ 7 }
+
+ and then "start" followed by "until 6", GDB currently incorrectly
+ stops inside the runtime loader, instead of line 6. Vis:
+
+ ...
+ Temporary breakpoint 1, main () at until.c:5
+ 4 {
+ (gdb) until 6
+ 0x00007ffff7f0a90d in __GI__dl_catch_exception (exception=exception@entry=0x7fffffffdb00, operate=<optimized out>, args=0x7ffff7f0a90d <__GI__dl_catch_exception+109>) at dl-error-skeleton.c:206
+ 206 dl-error-skeleton.c: No such file or directory.
+ (gdb)
+
+ The problem is related to longjmp handling -- dlsym internally
+ longjmps on error. The testcase can be reduced to this:
+
+ 1 #include <setjmp.h>
+ 2 void func () {
+ 3 jmp_buf buf;
+ 4 if (setjmp (buf) == 0)
+ 5 longjmp (buf, 1);
+ 6 }
+ 7
+ 8 int main () {
+ 9 func ();
+ 10 return 0; /* until to here */
+ 11 }
+
+ and then with "start" followed by "until 10", GDB currently
+ incorrectly stops at line 4 (returning from setjmp), instead of line
+ 10.
+
+ The problem is that the BPSTAT_WHAT_CLEAR_LONGJMP_RESUME code in
+ infrun.c fails to find the initiating frame, and so infrun thinks that
+ the longjmp jumped somewhere outer to "until"'s originating frame.
+
+ Here:
+
+ case BPSTAT_WHAT_CLEAR_LONGJMP_RESUME:
+ {
+ struct frame_info *init_frame;
+
+ /* There are several cases to consider.
+
+ 1. The initiating frame no longer exists. In this case we
+ must stop, because the exception or longjmp has gone too
+ far.
+
+ ...
+
+ init_frame = frame_find_by_id (ecs->event_thread->initiating_frame);
+
+ if (init_frame) // this is NULL!
+ {
+ ...
+ }
+
+ /* For Cases 1 and 2, remove the step-resume breakpoint, if it
+ exists. */
+ delete_step_resume_breakpoint (ecs->event_thread);
+
+ end_stepping_range (ecs); // case 1., so we stop.
+ }
+
+ The initiating frame is set by until_break_command ->
+ set_longjmp_breakpoint. The initiating frame is supposed to be the
+ frame that is selected when the command was issued, but
+ until_break_command instead passes the frame id of the _caller_ frame
+ by mistake. When the "until LINE" command is issued from main, the
+ caller frame is the caller of main. When later infrun tries to find
+ that frame by id, it fails to find it, because frame_find_by_id
+ doesn't unwind past main.
+
+ The bug is that we passed the caller frame's id to
+ set_longjmp_breakpoint. We should have passed the selected frame's id
+ instead.
+
+ Change-Id: Iaae1af7cdddf296b7c5af82c3b5b7d9b66755b1c
+
+2022-07-13 Enze Li <enze.li@hotmail.com>
+
+ gdbserver: remove unused variable
+ When building with clang 15, I got this error:
+
+ CXX server.o
+ server.cc:2985:10: error: variable 'new_argc' set but not used [-Werror,-Wunused-but-set-variable]
+ int i, new_argc;
+ ^
+ Remove the unused variable to eliminate the error.
+
+ Tested by rebuilding on x86_64-linux with clang 15.
+
+2022-07-13 Tom de Vries <tdevries@suse.de>
+
+ [gdb/symtab] Make per_cu->set_lang more strict
+ We have in per_cu->set_lang this comment:
+ ...
+ void set_lang (enum language lang)
+ {
+ /* We'd like to be more strict here, similar to what is done in
+ set_unit_type, but currently a partial unit can go from unknown to
+ minimal to ada to c. */
+ ...
+
+ Fix this by not setting m_lang for partial units.
+
+ This requires us to move the m_unit_type initialization to ensure that
+ m_unit_type is initialized before per_cu->m_lang.
+
+ Tested on x86_64-linux, with native and target board cc-with-dwz-m.
+
+2022-07-13 GDB Administrator <gdbadmin@sourceware.org>
+
+ Automatic date update in version.in
+
+2022-07-12 Pedro Alves <pedro@palves.net>
+
+ Improve "set scheduler-locking" documentation
+ This improves the "set scheduler-locking" documentation in the GDB
+ manual:
+
+ - Use a table to describe the four available modes.
+
+ - Describe "step" in terms of "on" and "off".
+
+ - Tweak the "replay" mode's description to describe replay first
+ instead of recording, and also mention how the mode behaves during
+ normal execution.
+
+ - Say what is the default mode.
+
+ Change-Id: Ie12140138b37534b7fc1d904da34f0f174aa11ce
+
+2022-07-12 Tom de Vries <tdevries@suse.de>
+
+ [gdb/symtab] Add dwarf2_cu::lang ()
+ The cu->per_cu->lang field was added to carry information from the initial
+ partial symtabs phase to the symtab expansion phase, for the benefit of a
+ particular optimization in process_imported_unit_die.
+
+ Other uses have been added, but since the first phase now has been
+ parallelized, those have become problematic and sources of race conditions.
+
+ Fix this by adding dwarf2_cu::lang () and using it where we can to replace
+ cu->per_cu->lang () with cu->lang ().
+
+ Also assert in dwarf2_cu::lang () that we're not returning language_unknown.
+
+ Tested on x86_64-linux.
+
+2022-07-12 Martin Liska <mliska@suse.cz>
+
+ LTO plugin: sync header file with GCC
+ include/ChangeLog:
+
+ * plugin-api.h (enum ld_plugin_tag): Sync with GCC.
+
+2022-07-12 Tom de Vries <tdevries@suse.de>
+
+ [gdb/record] Support recording of getrandom
+ Add missing support for recording of linux syscall getrandom.
+
+ Tested on x86_64-linux with native and target board unix/-m32.
+
+ Bug: https://sourceware.org/bugzilla/show_bug.cgi?id=22081
+
+2022-07-12 Tiezhu Yang <yangtiezhu@loongson.cn>
+
+ gdbserver: LoongArch: Add floating-point support
+ This commit adds floating-point support for LoongArch gdbserver.
+
+ gdb: LoongArch: Add floating-point support
+ This commit adds floating-point support for LoongArch gdb.
+
+2022-07-12 Tom de Vries <tdevries@suse.de>
+
+ [gdb/testsuite] Run two test-cases with ASAN_OPTIONS=verify_asan_link_order=0
+ When building gdb with -fsanitize=address we run into:
+ ...
+ builtin_spawn gdb -nw -nx -iex set height 0 -iex set width 0 -data-directory \
+ build/gdb/data-directory^M
+ ==10637==ASan runtime does not come first in initial library list; you \
+ should either link runtime to your application or manually preload it with \
+ LD_PRELOAD.^M
+ ERROR: GDB process no longer exists
+ ...
+
+ Prevent the ASan runtime error by using
+ ASAN_OPTIONS=verify_asan_link_order=0. This makes both test-cases pass.
+
+ Tested on x86_64-linux.
+
+ Bug: https://sourceware.org/bugzilla/show_bug.cgi?id=29358
+
+2022-07-12 Tom de Vries <tdevries@suse.de>
+
+ [gdb/testsuite] Add tsan-suppressions.txt
+ Add a new file tsan-suppressions.txt, to suppress the "unlock unlocked mutex"
+ problem in ncurses, filed in PR29328.
+
+ The file is added to the TSAN_OPTIONS in lib/gdb.exp.
+
+ Bug: https://sourceware.org/bugzilla/show_bug.cgi?id=29328
+
+2022-07-12 Tom de Vries <tdevries@suse.de>
+
+ [gdb/build] Fix build with gcc 4.8.5
+ When building gdb with gcc 4.8.5, we run into problems due to unconditionally
+ using:
+ ...
+ gdb_static_assert (std::is_trivially_copyable<packed>::value);
+ ...
+ in gdbsupport/packed.h.
+
+ Fix this by guarding the usage with HAVE_IS_TRIVIALLY_COPYABLE.
+
+ Tested by doing a full gdb build with gcc 4.8.5.
+
+2022-07-12 Tom de Vries <tdevries@suse.de>
+
+ Fix -fsanitize=thread for per_cu fields
+ When building gdb with -fsanitize=thread and gcc 12, and running test-case
+ gdb.dwarf2/dwz.exp, we run into a data race between:
+ ...
+ Read of size 1 at 0x7b200000300d by thread T2:^M
+ #0 cutu_reader::cutu_reader(dwarf2_per_cu_data*, dwarf2_per_objfile*, \
+ abbrev_table*, dwarf2_cu*, bool, abbrev_cache*) gdb/dwarf2/read.c:6164 \
+ (gdb+0x82ec95)^M
+ ...
+ and:
+ ...
+ Previous write of size 1 at 0x7b200000300d by main thread:^M
+ #0 prepare_one_comp_unit gdb/dwarf2/read.c:23588 (gdb+0x86f973)^M
+ ...
+
+ In other words, between:
+ ...
+ if (this_cu->reading_dwo_directly)
+ ...
+ and:
+ ...
+ cu->per_cu->lang = pretend_language;
+ ...
+
+ Likewise, we run into a data race between:
+ ...
+ Write of size 1 at 0x7b200000300e by thread T4:
+ #0 process_psymtab_comp_unit gdb/dwarf2/read.c:6789 (gdb+0x830720)
+ ...
+ and:
+ ...
+ Previous read of size 1 at 0x7b200000300e by main thread:
+ #0 cutu_reader::cutu_reader(dwarf2_per_cu_data*, dwarf2_per_objfile*, \
+ abbrev_table*, dwarf2_cu*, bool, abbrev_cache*) gdb/dwarf2/read.c:6164 \
+ (gdb+0x82edab)
+ ...
+
+ In other words, between:
+ ...
+ this_cu->unit_type = DW_UT_partial;
+ ...
+ and:
+ ...
+ if (this_cu->reading_dwo_directly)
+ ...
+
+ Likewise for the write to addresses_seen in cooked_indexer::check_bounds and a
+ read from is_dwz in dwarf2_find_containing_comp_unit for test-case
+ gdb.dwarf2/dw2-dir-file-name.exp and target board cc-with-dwz-m.
+
+ The problem is that the written fields are part of the same memory location as
+ the read fields, so executing a read and write in different threads is
+ undefined behavour.
+
+ Making the written fields separate memory locations, using the new
+ struct packed template fixes this.
+
+ The set of fields has been established experimentally to be the
+ minimal set to get rid of this type of -fsanitize=thread errors, but
+ more fields might require the same treatment.
+
+ Looking at the properties of the lang field, unlike dwarf_version it's
+ not available in the unit header, so it will be set the first time
+ during the parallel cooked index reading. The same holds for
+ unit_type, and likewise for addresses_seen.
+
+ dwarf2_per_cu_data::addresses_seen is moved so that the bitfields that
+ currently follow it can be merged in the same memory location as the
+ bitfields that currently precede it, for better packing.
+
+ Tested on x86_64-linux.
+
+ Co-Authored-By: Pedro Alves <pedro@palves.net>
+
+ Change-Id: Ifa94f0a2cebfae5e8f6ddc73265f05e7fd9e1532
+
+2022-07-12 Pedro Alves <pedro@palves.net>
+
+ Introduce struct packed template
+ When building gdb with -fsanitize=thread and gcc 12, and running test-case
+ gdb.dwarf2/dwz.exp, we run into a few data races. For example, between:
+
+ ...
+ Write of size 1 at 0x7b200000300e by thread T4:
+ #0 process_psymtab_comp_unit gdb/dwarf2/read.c:6789 (gdb+0x830720)
+ ...
+
+ and:
+
+ ...
+ Previous read of size 1 at 0x7b200000300e by main thread:
+ #0 cutu_reader::cutu_reader(dwarf2_per_cu_data*, dwarf2_per_objfile*, \
+ abbrev_table*, dwarf2_cu*, bool, abbrev_cache*) gdb/dwarf2/read.c:6164 \
+ (gdb+0x82edab)
+ ...
+
+ In other words, between:
+
+ ...
+ this_cu->unit_type = DW_UT_partial;
+ ...
+
+ and:
+
+ ...
+ if (this_cu->reading_dwo_directly)
+ ...
+
+ The problem is that the written fields are part of the same memory
+ location as the read fields, so executing a read and write in
+ different threads is undefined behavour.
+
+ Making the written fields separate memory locations, like this:
+
+ ...
+ struct {
+ ENUM_BITFIELD (dwarf_unit_type) unit_type : 8;
+ };
+ ...
+
+ fixes it, however that also increases the size of struct
+ dwarf2_per_cu_data, because it introduces padding due to alignment of
+ these new structs, which align on the natural alignment of the
+ specified type of their fields. We can fix that with
+ __attribute__((packed)), like so:
+
+ struct {
+ ENUM_BITFIELD (dwarf_unit_type) unit_type : 8 __attribute__((packed));
+ };
+
+ but to avoid having to write that in several places and add suitable
+ comments explaining how that concoction works, introduce a new struct
+ packed template that wraps/hides this. Instead of the above, we'll be
+ able to write:
+
+ packed<dwarf_unit_type, 1> unit_type;
+
+ Note that we can't change the type of dwarf_unit_type, as that is
+ defined in include/, and shared with other projects, some of those
+ written in C.
+
+ This patch just adds the struct packed type. Following patches will
+ make use of it. One of those patches will want to wrap a struct
+ packed in an std::atomic, like:
+
+ std::atomic<std::packed<language, 1>> m_lang;
+
+ so the new gdbsupport/packed.h header adds some operators to make
+ comparisions between that std::atomic and the type that the wrapped
+ struct packed wraps work, like in:
+
+ if (m_lang == language_c)
+
+ It would be possible to implement struct packed without using
+ __attribute__((packed)), by having it store an array of bytes of the
+ appropriate size instead, however that would make it less convenient
+ to debug GDB. The way it's implemented, printing a struct packed
+ variable just prints its field using its natural type, which is
+ particularly useful if the type is an enum. I believe that
+ __attribute__((packed)) is supported by all compilers that are able to
+ build GDB. Even a few BFD headers use on ATTRIBUTE_PACKED on external
+ types:
+
+ include/coff/external.h: } ATTRIBUTE_PACKED
+ include/coff/external.h:} ATTRIBUTE_PACKED ;
+ include/coff/external.h:} ATTRIBUTE_PACKED ;
+ include/coff/pe.h:} ATTRIBUTE_PACKED ;
+ include/coff/pe.h:} ATTRIBUTE_PACKED;
+ include/elf/external.h:} ATTRIBUTE_PACKED Elf_External_Versym;
+
+ It is not possible to build GDB with MSVC today, but if it could, that
+ would be one compiler that doesn't support this attribute. However,
+ it supports packing via pragmas, so there's a way to cross that bridge
+ if we ever get to it. I believe any compiler worth its salt supports
+ some way of packing.
+
+ In any case, the worse that happens without the attribute is that some
+ types become larger than ideal. Regardless, I've added a couple
+ static assertions to catch such compilers in action:
+
+ /* Ensure size and aligment are what we expect. */
+ gdb_static_assert (sizeof (packed) == Bytes);
+ gdb_static_assert (alignof (packed) == 1);
+
+ Change-Id: Ifa94f0a2cebfae5e8f6ddc73265f05e7fd9e1532
+
+2022-07-12 Alan Modra <amodra@gmail.com>
+
+ PowerPC md_end: Don't htab_delete(NULL)
+ It might be possible to hit md_end before md_begin is called, don't
+ segfault if so. Also, remove a useless check.
+
+ * gas/config/tc-ppc.c (insn_calloc): Remove needless overflow
+ check.
+ (ppc_md_end): Check ppc_hash before deleting. Clear ppc_hash.
+
+2022-07-12 Alan Modra <amodra@gmail.com>
+
+ PR29355, ld segfaults with -r/-q and custom-named section .rela*
+ The bug testcase uses an output section named .rel or .rela which has
+ input .data sections mapped to it. The input .data section has
+ relocations. When counting output relocations SHT_REL and SHT_RELA
+ section reloc_count is ignored, with the justification that reloc
+ sections themselves can't have relocations and some backends use
+ reloc_count in reloc sections. However, the test wrongly used the
+ output section type (which normally would match input section type).
+ Fix that. Note that it is arguably wrong for ld to leave the output
+ .rel/.rela section type as SHT_REL/SHT_RELA when non-empty non-reloc
+ sections are written to it, but I'm not going to change that since it
+ might be useful to hand-craft relocs in a data section that is then
+ written to a SHT_REL/SHT_RELA output section.
+
+ PR 29355
+ * elflink.c (bfd_elf_final_link): Use input section type rather
+ than output section type to determine whether to exclude using
+ reloc_count from that section.
+
+2022-07-12 Jiangshuai Li <jiangshuai_li@c-sky.com>
+
+ gdb/csky complete csky_dwarf_reg_to_regnum
+ For csky arch, the correspondence between Dwarf registers and GDB
+ registers are as follows:
+ dwarf regnos 0~31 ==> gdb regs r0~r31
+ dwarf regno CSKY_HI_REGNUM(36) ==> gdb reg hi
+ dwarf regno CSKY_LO_REGNUM(37) ==> gdb reg hi
+ dwarf regno CSKY_PC_REGNUM(72) ==> gdb reg pc
+ dwarf regnos FV_PSEUDO_REGNO_FIRST(74)~FV_PSEUDO_REGNO_LAST(201)
+ ==>
+ gdb regs s0~s127 (pseudo regs for float and vector regs)
+
+ other dwarf regnos have no corresponding gdb regs to them.
+
+2022-07-12 GDB Administrator <gdbadmin@sourceware.org>
+
+ Automatic date update in version.in
+
+2022-07-11 Pedro Alves <pedro@palves.net>
+
+ Always emit =thread-exited notifications, even if silent
+ [Note: the testcased added by this commit depends on
+ https://sourceware.org/pipermail/gdb-patches/2022-June/190259.html,
+ otherwise GDB just crashes when detaching the core]
+
+ Currently, in MI, =thread-created are always emitted, like:
+
+ =thread-group-started,id="i1",pid="195680"
+ =thread-created,id="1",group-id="i1"
+ ...
+
+ but on teardown, if the target uses exit_inferior_silent, then you'll
+ only see the inferior exit notification (thread-group-exited), no
+ notification for threads.
+
+ The core target is one of the few targets that use
+ exit_inferior_silent. Here's an example session:
+
+ -target-select core $corefile
+ =thread-group-started,id="i1",pid="195680"
+ =thread-created,id="1",group-id="i1"
+ ...
+ ^connected,frame=....
+ (gdb)
+ -target-detach
+ =thread-group-exited,id="i1"
+ ^done
+ (gdb)
+
+ This imbalance of emitting =thread-created but then not =thread-exited
+ seems off to me. (And, it complicates changes I want to do to
+ centralize emitting thread exit notifications for the CLI, which is
+ why I'm looking at this.)
+
+ And then, since most other targets use exit_inferior instead of
+ exit_inferior_silent, MI is already emitting =thread-exited
+ notifications when tearing down an inferior, for most targets.
+
+ This commit makes MI always emit the =thread-exited notifications,
+ even for exit_inferior_silent.
+
+ Afterwards, when debugging a core, MI outputs:
+
+ (gdb)
+ -target-detach
+ =thread-exited,id="1",group-id="i1" << new line
+ =thread-group-exited,id="i1"
+ ^done
+ (gdb)
+
+ Surprisingly, there's no MI testcase debugging a core file. This
+ commit adds the first.
+
+ Change-Id: I5100501a46f07b6bbad3e04d120c2562a51c93a4
+
+2022-07-11 Pedro Alves <pedro@palves.net>
+
+ Fix core-file -> detach -> crash (corefiles/29275)
+ After loading a core file, you're supposed to be able to use "detach"
+ to unload the core file. That unfortunately regressed starting with
+ GDB 11, with these commits:
+
+ 1192f124a308 - gdb: generalize commit_resume, avoid commit-resuming when threads have pending statuses
+ 408f66864a1a - detach in all-stop with threads running
+
+ resulting in a GDB crash:
+
+ ...
+ Thread 1 "gdb" received signal SIGSEGV, Segmentation fault.
+ 0x0000555555e842bf in maybe_set_commit_resumed_all_targets () at ../../src/gdb/infrun.c:2899
+ 2899 if (proc_target->commit_resumed_state)
+ (top-gdb) bt
+ #0 0x0000555555e842bf in maybe_set_commit_resumed_all_targets () at ../../src/gdb/infrun.c:2899
+ #1 0x0000555555e848bf in scoped_disable_commit_resumed::reset (this=0x7fffffffd440) at ../../src/gdb/infrun.c:3023
+ #2 0x0000555555e84a0c in scoped_disable_commit_resumed::reset_and_commit (this=0x7fffffffd440) at ../../src/gdb/infrun.c:3049
+ #3 0x0000555555e739cd in detach_command (args=0x0, from_tty=1) at ../../src/gdb/infcmd.c:2791
+ #4 0x0000555555c0ba46 in do_simple_func (args=0x0, from_tty=1, c=0x55555662a600) at ../../src/gdb/cli/cli-decode.c:95
+ #5 0x0000555555c112b0 in cmd_func (cmd=0x55555662a600, args=0x0, from_tty=1) at ../../src/gdb/cli/cli-decode.c:2514
+ #6 0x0000555556173b1f in execute_command (p=0x5555565c5916 "", from_tty=1) at ../../src/gdb/top.c:699
+
+ The code that crashes looks like:
+
+ static void
+ maybe_set_commit_resumed_all_targets ()
+ {
+ scoped_restore_current_thread restore_thread;
+
+ for (inferior *inf : all_non_exited_inferiors ())
+ {
+ process_stratum_target *proc_target = inf->process_target ();
+
+ if (proc_target->commit_resumed_state)
+ ^^^^^^^^^^^
+
+ With 'proc_target' above being null. all_non_exited_inferiors filters
+ out inferiors that have pid==0. We get here at the end of
+ detach_command, after core_target::detach has already run, at which
+ point the inferior _should_ have pid==0 and no process target. It is
+ clear it no longer has a process target, but, it still has a pid!=0
+ somehow.
+
+ The reason the inferior still has pid!=0, is that core_target::detach
+ just unpushes, and relies on core_target::close to actually do the
+ getting rid of the core and exiting the inferior. The problem with
+ that is that detach_command grabs an extra strong reference to the
+ process stratum target, so the unpush_target inside
+ core_target::detach doesn't actually result in a call to
+ core_target::close.
+
+ Fix this my moving the cleaning up the core inferior to a shared
+ routine called by both core_target::close and core_target::detach. We
+ still need to cleanup the inferior from within core_file::close
+ because there are paths to it that want to get rid of the core without
+ going through detach. E.g., "core-file" -> "run".
+
+ This commit includes a new test added to gdb.base/corefile.exp to
+ cover the "core-file core" -> "detach" scenario.
+
+ Bug: https://sourceware.org/bugzilla/show_bug.cgi?id=29275
+
+ Change-Id: Ic42bdd03182166b19f598428b0dbc2ce6f67c893
+
+2022-07-11 Pedro Alves <pedro@palves.net>
+
+ Fix non-existent "@var{thread-id}" in stop reply descriptions
+ In the description of stop replies, where the "thread" register is
+ explained, and where the fork and vfork stop reasons are detailed,
+ there are references to "@var{thread-id}", but such variable does not
+ actually exist. This commit fixes it.
+
+ Change-Id: If679944aaf15f6f64aabe506339a9e7667864cab
+
+2022-07-11 Luis Machado <luis.machado@arm.com>
+
+ Try a couple PAuth compilation flags for gdb.arch/aarch64-pauth.exp
+ The -msign-return-address switch has been dropped from GCC, but some
+ older compiler may still support it. Make sure we try both
+ -msign-return-address and -mbranch-protection before bailing out when
+ running gdb.arch/aarch64-pauth.exp.
+
+2022-07-11 Andrew Burgess <aburgess@redhat.com>
+
+ gdb: add support for disassembler styling using libopcodes
+ This commit extends GDB to make use of libopcodes styling support
+ where available, currently this is just i386 based architectures, and
+ RISC-V.
+
+ For architectures that don't support styling using libopcodes GDB will
+ fall back to using the Python Pygments package, when the package is
+ available.
+
+ The new libopcodes based styling has the disassembler identify parts
+ of the disassembled instruction, e.g. registers, immediates,
+ mnemonics, etc, and can style these components differently.
+ Additionally, as the styling is now done in GDB we can add settings to
+ allow the user to configure which colours are used right from the GDB
+ CLI.
+
+ There's some new maintenance commands:
+
+ maintenance set libopcodes-styling enabled on|off
+ maintenance show libopcodes-styling
+
+ These can be used to manually disable use of libopcodes styling. This
+ is a maintenance command as it's not anticipated that a user should
+ need to do this. But, this could be useful for testing, or, in some
+ rare cases, a user might want to override the Python hook used for
+ disassembler styling, and then disable libopcode styling so that GDB
+ falls back to using Python. Right now I would consider this second
+ use case a rare situation, which is why I think a maintenance command
+ is appropriate.
+
+ When libopcodes is being used for styling then the user can make use
+ of the following new styles:
+
+ set/show style disassembler comment
+ set/show style disassembler immediate
+ set/show style disassembler mnemonic
+ set/show style disassembler register
+
+ The disassembler also makes use of the 'address' and 'function'
+ styles to style some parts of the disassembler output. I have also
+ added the following aliases though:
+
+ set/show style disassembler address
+ set/show style disassembler symbol
+
+ these are aliases for:
+
+ set/show style address
+ set/show style function
+
+ respectively, and exist to make it easier for users to discover
+ disassembler related style settings. The 'address' style is used to
+ style numeric addresses in the disassembler output, while the 'symbol'
+ or 'function' style is used to style the names of symbols in
+ disassembler output.
+
+ As not every architecture supports libopcodes styling, the maintenance
+ setting 'libopcodes-styling enabled' has an "auto-off" type behaviour.
+ Consider this GDB session:
+
+ (gdb) show architecture
+ The target architecture is set to "auto" (currently "i386:x86-64").
+ (gdb) maintenance show libopcodes-styling enabled
+ Use of libopcodes styling support is "on".
+
+ the setting defaults to "on" for architectures that support libopcodes
+ based styling.
+
+ (gdb) set architecture sparc
+ The target architecture is set to "sparc".
+ (gdb) maintenance show libopcodes-styling enabled
+ Use of libopcodes styling support is "off" (not supported on architecture "sparc")
+
+ the setting will show as "off" if the user switches to an architecture
+ that doesn't support libopcodes styling. The underlying setting is
+ still "on" at this point though, if the user switches back to
+ i386:x86-64 then the setting would go back to being "on".
+
+ (gdb) maintenance set libopcodes-styling enabled off
+ (gdb) maintenance show libopcodes-styling enabled
+ Use of libopcodes styling support is "off".
+
+ now the setting is "off" for everyone, even if the user switches back
+ to i386:x86-64 the setting will still show as "off".
+
+ (gdb) maintenance set libopcodes-styling enabled on
+ Use of libopcodes styling not supported on architecture "sparc".
+ (gdb) maintenance show libopcodes-styling enabled
+ Use of libopcodes styling support is "off".
+
+ attempting to switch the setting "on" for an unsupported architecture
+ will give an error, and the setting will remain "off".
+
+ (gdb) set architecture auto
+ The target architecture is set to "auto" (currently "i386:x86-64").
+ (gdb) maintenance show libopcodes-styling enabled
+ Use of libopcodes styling support is "off".
+ (gdb) maintenance set libopcodes-styling enabled on
+ (gdb) maintenance show libopcodes-styling enabled
+ Use of libopcodes styling support is "on".
+
+ the user will need to switch back to a supported architecture before
+ they can one again turn this setting "on".
+
+2022-07-11 Andrew Burgess <aburgess@redhat.com>
+
+ gdb: have gdb_disassemble_info carry 'this' in its stream pointer
+ The gdb_disassemble_info class is a wrapper around the libopcodes
+ disassemble_info struct. The 'stream' field of disassemble_info is
+ passed as an argument to the fprintf_func and fprintf_styled_func
+ callbacks when the disassembler wants to print anything.
+
+ Previously, GDB would store a pointer to a ui_file object in the
+ 'stream' field, then, when the disassembler wanted to print anything,
+ the content would be written to the ui_file object. An example of an
+ fprintf_func callback, from gdb/disasm.c is:
+
+ int
+ gdb_disassembler::dis_asm_fprintf (void *stream, const char *format, ...)
+ {
+ /* Write output to STREAM here. */
+ }
+
+ This is fine, but has one limitation, within the print callbacks we
+ only have access to STREAM, we can't access any additional state
+ stored within the gdb_disassemble_info object.
+
+ Right now this isn't a problem, but in a future commit this will
+ become an issue, how we style the output being written to STREAM will
+ depend on the state of the gdb_disassemble_info object, and this state
+ might need to be updated, depending on what is being printed.
+
+ In this commit I propose changing the 'stream' field of the
+ disassemble_info to carry a pointer to the gdb_disassemble_info
+ sub-class, rather than the stream itself.
+
+ We then have the two sub-classes of gdb_disassemble_info to consider,
+ the gdb_non_printing_disassembler class never cared about the stream,
+ previously, for this class, the stream was nullptr. With the change
+ to make stream be a gdb_disassemble_info pointer, no further updates
+ are needed for gdb_non_printing_disassembler.
+
+ The other sub-class is gdb_printing_disassembler. In this case the
+ sub-class now carries around a pointer to the stream object. The
+ print callbacks are updated to cast the incoming stream object back to
+ a gdb_printing_disassembler, and then extract the stream.
+
+ This is purely a refactoring commit. A later commit will add
+ additional state to the gdb_printing_disassembler, and update the
+ print callbacks to access this state.
+
+ There should be no user visible changes after this commit.
+
+2022-07-11 Tom de Vries <tdevries@suse.de>
+
+ [gdb/symtab] Fix data race in per_cu->length
+ With gdb build with -fsanitize=thread and test-case
+ gdb.dwarf2/dw4-sig-types.exp and target board cc-with-dwz-m we run into a data
+ race between:
+ ...
+ Write of size 4 at 0x7b2800002268 by thread T4:^M
+ #0 cutu_reader::cutu_reader(dwarf2_per_cu_data*, dwarf2_per_objfile*, \
+ abbrev_table*, dwarf2_cu*, bool, abbrev_cache*) gdb/dwarf2/read.c:6236 \
+ (gdb+0x82f525)^M
+ ...
+ and this read:
+ ...
+ Previous read of size 4 at 0x7b2800002268 by thread T1:^M
+ #0 dwarf2_find_containing_comp_unit gdb/dwarf2/read.c:23444 \
+ (gdb+0x86e22e)^M
+ ...
+
+ In other words, between this write:
+ ...
+ this_cu->length = cu->header.get_length ();
+ ...
+ and this read:
+ ...
+ && mid_cu->sect_off + mid_cu->length > sect_off))
+ ...
+ of per_cu->length.
+
+ Fix this similar to the per_cu->dwarf_version case, by only setting it if
+ needed, and otherwise verifying that the same value is used. [ Note that the
+ same code is already present in the other cutu_reader constructor. ]
+
+ Move this logic into into a member function set_length to make sure it's used
+ consistenly, and make the field private in order to enforce access through the
+ member functions, and rename it to m_length.
+
+ This exposes (running test-case gdb.dwarf2/fission-reread.exp) that in
+ fill_in_sig_entry_from_dwo_entry, the m_length field is overwritten.
+ For now, allow for that exception.
+
+ While we're at it, make sure that the length is set before read.
+
+ Tested on x86_64-linux.
+
+ Bug: https://sourceware.org/bugzilla/show_bug.cgi?id=29344
+
+2022-07-11 Tom de Vries <tdevries@suse.de>
+
+ [gdb/symtab] Use comp_unit_head::get_length
+ There's a spot in read_comp_units_from_section where we explictly use
+ initial_length_size to get the total length:
+ ...
+ this_cu->length = cu_header.length + cu_header.initial_length_size;
+ ...
+
+ Instead, just use cu_header.get_length ().
+
+ Tested on x86_64-linux.
+
+2022-07-11 GDB Administrator <gdbadmin@sourceware.org>
+
+ Automatic date update in version.in
+
+2022-07-10 Luis Machado <luis.machado@arm.com>
+
+ Fix include guard naming for arch/aarch64-mte-linux.h
+ It should be ARCH_AARCH64_MTE_LINUX_H as opposed to ARCH_AARCH64_LINUX_H.
+
+2022-07-10 Youling Tang <tangyouling@loongson.cn>
+
+ gdbserver: LoongArch: Add orig_a0 processing
+ Commit 736918239b16 ("gdb: LoongArch: add orig_a0 into register set")
+ introduced orig_a0, similar processing needs to be done in gdbserver.
+
+ At the same time, add orig_a0 related comments.
+
+2022-07-10 Youling Tang <tangyouling@loongson.cn>
+
+ gdbserver: LoongArch: Simplify code with register number macros
+ Move "enum loongarch_regnum" to gdb/arch/loongarch.h so that the
+ macro definitions can be used in gdbserver/linux-loongarch-low.cc
+ to simplify the code.
+
+2022-07-10 GDB Administrator <gdbadmin@sourceware.org>
+
+ Automatic date update in version.in
+
+2022-07-09 Alan Modra <amodra@gmail.com>
+
+ gas: tc-tic54x.c hash tables
+ Cleaning up the subsym_hash memory is a real pain. Keys and values
+ entered into the table are quite diverse. In some cases the key is
+ allocated and thus needs to be freed, in others the key is a const
+ string. Values are similar, and in some cases not even a string.
+ Tidy this by inserting a new subsym_ent_t that describes key/value
+ type. This meant the math_hash table was no longer needed. The patch
+ also tidies how math functions are called, those that are supposed to
+ return int now no longer return their value in a float.
+
+ * config/tc-tic54x.c (math_hash): Delete.
+ (subsym_proc_entry): Move earlier, make proc a union, merge with..
+ (math_proc_entry): ..this. Delete type.
+ (math_procs): Merge into subsym_procs.
+ (subsym_ent_t): New. Use this type in subsym_hash..
+ (stag_add_field_symbols, tic54x_var, tic54x_macro_info): ..here..
+ (md_begin, subsym_create_or_replace, subsym_lookup): ..and here..
+ (subsym_substitute): ..and here. Adjust subsym_proc_entry
+ function calls. Free replacement when not returned.
+ (subsym_get_arg): Adjust subsym_lookup.
+ (free_subsym_ent, subsym_htab_create ): New functions, use when
+ creating subsym_hash.
+ (free_local_label_ent, local_label_htab_create): Similarly.
+ (tic54x_remove_local_label): Delete.
+ (tic54x_clear_local_labels): Simplify.
+ (tic54x_asg): Use notes obstack to dup strings.
+ (tic54x_eval): Likewise.
+ (subsym_ismember): Likewise.
+ (math_cvi, math_int, math_sgn): Return int.
+ (tic54x_macro_start): Decrement macro_level before calling as_fatal.
+ (tic54x_md_end): New function.
+ * config/tc-tic54h.c (tic54x_md_end): Declare.
+ (md_end): Define.
+
+2022-07-09 Alan Modra <amodra@gmail.com>
+
+ gas: use notes_calloc in string hash
+ Using notes_calloc means all of the string hash table memory should
+ now be freed before gas exits, even though htab_delete isn't called.
+ This also means that the hash table free_f and del_f must be NULL,
+ because freeing notes obstack memory results in all more recently
+ allocated notes memory being freed too. So hash table resizing won't
+ free any memory, and will be a little faster. Also, htab_delete won't
+ do anything (and be quick about it).
+
+ Since htab_traverse can also resize hash tables (to make another
+ traversal faster if the table is largely empty), stop that happening
+ when only one traversal is done.
+
+ * as.h: Reorder hash.h after symbols.h for notes_calloc decl.
+ * hash.h (str_htab_create): Use notes_calloc. Do not free.
+ * symbols.c (resolve_local_symbol_values): Don't resize
+ during hash table traversal.
+ * config/obj-elf.c (elf_frob_file_after_relocs): Likewise.
+ * config/tc-ia64.c (ia64_adjust_symtab, ia64_frob_file): Likewise.
+ * config/tc-nds32.c (nds32_elf_analysis_relax_hint): Likewise.
+
+2022-07-09 Alan Modra <amodra@gmail.com>
+
+ gas: target string hash tables
+ This allocates entries added to the string hash tables on the notes
+ obstack, so that at least those do not leak. A followup patch will
+ switch over the str_hash allocation to notes_calloc, which is why I
+ haven't implemented deleting all the target string hash tables.
+
+ * config/obj-coff-seh.c (get_pxdata_name, alloc_pxdata_item): Use
+ notes obstack for string hash table entries.
+ * config/tc-alpha.c (get_alpha_reloc_tag, md_begin): Likewise.
+ * config/tc-h8300.c (md_begin): Likewise.
+ * config/tc-ia64.c (dot_rot, dot_pred_rel, dot_alias): Likewise.
+ * config/tc-nds32.c (nds32_relax_hint): Likewise.
+ * config/tc-riscv.c (riscv_init_csr_hash): Likewise.
+ * config/tc-score.c (s3_insert_reg): Likewise.
+ (s3_build_score_ops_hsh, s3_build_dependency_insn_hsh): Likewise.
+ * config/tc-score7.c (s7_build_score_ops_hsh): Likewise.
+ (s7_build_dependency_insn_hsh): Likewise.
+ * config/tc-tic4x.c (tic4x_asg): Likewise.
+
+2022-07-09 Alan Modra <amodra@gmail.com>
+
+ arc gas: don't leak arc_opcode_hash memory
+ The arc opcode hash table has entries that have a realloc'd field.
+ This doesn't lend itself to obstack allocation, so freeing must be
+ done with a purpose built hashtab del_f.
+
+ * config/tc-arc.c (arc_opcode_free): New function.
+ (md_begin): Pass the above as del_f to htab_create_alloc.
+ (arc_md_end): New function.
+ * config/tc-arc.h (arc_md_end): Declare.
+ (md_end): Define.
+
+2022-07-09 Alan Modra <amodra@gmail.com>
+
+ i386 gas: don't leak op_hash or reg_hash memory
+ This tidies memory used by the two x86 gas string hash tables before
+ exiting. I'm using a two-pronged approach, firstly the obvious call
+ to htab_delete plus telling the libiberty/hashtab.c infrastructure to
+ free tuples generated by str_hash_insert, and secondly putting the x86
+ core_optab memory on the notes obstack. It would be possible to free
+ core_optab memory by using a custom hash table del_f on x86, as I do
+ for arc, but a later patch will move all the string hash memory to the
+ notes obstack.
+
+ * config/tc-i386.c (md_begin): Use notes_alloc for core_optab.
+ (386_md_end): New function.
+ * config/tc-i386.h (386_md_end): Declare.
+ (md_end): Define.
+ * hash.h (str_htab_create): Pass free as del_f.
+
+2022-07-09 Alan Modra <amodra@gmail.com>
+
+ ppc gas: don't leak ppc_hash memory
+ * config/tc-ppc.c (insn_obstack): New.
+ (insn_calloc): New function.
+ (ppc_setup_opcodes): Use insn_obstack for ppc_hash.
+ (ppc_md_end): New function.
+ * config/tc-ppc.h (ppc_md_end): Declare
+ (md_end): Define.
+
+2022-07-09 Alan Modra <amodra@gmail.com>
+
+ gas hash.h tidy
+ Only inline functions should be defined in hash.h, there's no benefit
+ in having multiple copies of hash_string_tuple and eq_string_tuple.
+ Also, use the table alloc_f when allocating tuples to be stored, so
+ that these functions are usable with different memory allocation
+ strategies.
+
+ * hash.h (struct string_tuple, string_tuple_t): Move earlier.
+ (string_tuple_alloc): Add table param, allocate using table alloc_f.
+ (str_hash_insert): Adjust to suit. Call table->free_f when
+ entry is not used.
+ (hash_string_tuple, eq_string_tuple): Move to..
+ * hash.c: ..here.
+
+2022-07-09 Alan Modra <amodra@gmail.com>
+
+ gas: rename md_end to md_finish
+ Currently md_end is typically used for some final actions rather than
+ freeing memory like other *_end functions. Rename it to md_finish,
+ and rename target implementation. The renaming of target functions
+ makes it possible to find them all with "grep md_finish",
+ eg. md_mips_end is renamed to mips_md_finish, not md_mips_finish.
+ This patch leaves a number of md_end functions unchanged, those that
+ either do nothing or deallocate memory, and calls them late.
+
+ The idea here is that target maintainers implement md_end functions to
+ tidy memory, if anyone cares. Freeing persistent memory in gas is
+ not at all important, except that it can hide more important memory
+ leaks, those that happen once per some frequent gas operation, amongst
+ these unimportant memory leaks.
+
+ * as.c (main): Rename md_end to md_finish.
+ * config/tc-alpha.c, * config/tc-alpha.h,
+ * config/tc-arc.c, * config/tc-arc.h,
+ * config/tc-arm.c, * config/tc-arm.h,
+ * config/tc-csky.c, * config/tc-csky.h,
+ * config/tc-ia64.c, * config/tc-ia64.h,
+ * config/tc-mcore.c, * config/tc-mcore.h,
+ * config/tc-mips.c, * config/tc-mips.h,
+ * config/tc-mmix.c, * config/tc-mmix.h,
+ * config/tc-msp430.c, * config/tc-msp430.h,
+ * config/tc-nds32.c, * config/tc-nds32.h,
+ * config/tc-ppc.c, * config/tc-ppc.h,
+ * config/tc-pru.c, * config/tc-pru.h,
+ * config/tc-riscv.c, * config/tc-riscv.h,
+ * config/tc-s390.c, * config/tc-s390.h,
+ * config/tc-sparc.c, * config/tc-sparc.h,
+ * config/tc-tic4x.c, * config/tc-tic4x.h,
+ * config/tc-tic6x.c, * config/tc-tic6x.h,
+ * config/tc-v850.c, * config/tc-v850.h,
+ * config/tc-xtensa.c, * config/tc-xtensa.h,
+ * config/tc-z80.c, * config/tc-z80.h: Similarly.
+ * output-file.c (output_file_close): Call md_end.
+
+2022-07-09 Alan Modra <amodra@gmail.com>
+
+ gas: set up notes obstack earlier
+ So that the notes obstack can be used for persistent storage in
+ parse_args.
+
+ * as.c (parse_args): Use notes_alloc and notes_strdup.
+ (free_notes): New function.
+ (main): Init notes obstack, and arrange to be freed on exit.
+ * read.c (read_begin): Don't init notes obstack.
+ (read_end): Free cond_obstack.
+ * subsegs.c (subsegs_end): Don't free cond_obstack or notes.
+
+2022-07-09 Alan Modra <amodra@gmail.com>
+
+ gas: itbl_files
+ itbl_files seems to be debug code. Get rid of it.
+
+ * as.c (struct itbl_file_list): Delete.
+ (itbl_files): Delete.
+ (parse_args): Don't keep itbl_files list.
+
+2022-07-09 Alan Modra <amodra@gmail.com>
+
+ gas: free sy_hash, macro_hash and po_hash
+ * macro.c (macro_end): New function.
+ * macro.h (macro_end): Declare.
+ * read.c (read_end, poend): New functions.
+ * read.h (read_end): Declare.
+ * symbols.c (symbol_end): New function.
+ * symbols.h (symbol_end): Declare.
+ * output-file.c (output_file_close): Call new *_end functions.
+
+2022-07-09 Alan Modra <amodra@gmail.com>
+
+ dw2gencfi.c: use notes obstack
+ Use notes obstack for dwcfi_hash entries, and free table. Freeing the
+ table makes memory checkers complain more about "definitely lost"
+ memory as we've moved some from the "still reachable" category.
+ That will be fixed with a later patch.
+
+ * dw2gencfi.c (get_debugseg_name): Allocate on notes obstack.
+ (alloc_debugseg_item): Likewise.
+ (dwcfi_hash_find_or_make): Adjust failure path free.
+ (cfi_finish): Delete dwfci_hash.
+
+2022-07-09 Alan Modra <amodra@gmail.com>
+
+ expr.c make_expr_symbol: use notes obstack
+ * expr.c (make_expr_symbol): Use notes_alloc.
+
+ read.c assign_symbol: use notes obstack for dummy listing frag
+ * read.c (assign_symbol): Use notes_calloc for dummy_frag.
+
+ read.c s_include: use notes obstack for path
+ * read.c (s_include): Use notes obstack for path mem.
+
+2022-07-09 Alan Modra <amodra@gmail.com>
+
+ macro.c: use string hash from hash.h for macro_hash
+ Another case of duplicated hash.h code, the only minor difference
+ being that macro->format_hash was created with 7 entries vs. str_hash
+ with 16 entries.
+
+ * macro.c (macro_init, define_macro): Use str_htab_create.
+ (do_formals, define_macro, macro_expand_body): Use str_hash_insert
+ (macro_expand_body): Use str_hash_find and str_hash_delete.
+ (delete_macro): Likewise.
+ (sub_actual, macro_expand, check_macro): Use str_hash_find.
+ (expand_irp): Use str_htab_create and str_hash_insert.
+ * macro.h (struct macro_struct): Tidy.
+ (struct macro_hash_entry, macro_hash_entry_t, hash_macro_entry),
+ (eq_macro_entry, macro_entry_alloc, macro_entry_find),
+ (struct formal_hash_entry, formal_hash_entry_t),
+ (hash_formal_entry, eq_formal_entry, formal_entry_alloc),
+ (formal_entry_find): Delete.
+ * config/tc-iq2000.c (iq2000_add_macro): Use str_htab_create
+ and str_hash_insert.
+
+2022-07-09 Alan Modra <amodra@gmail.com>
+
+ read.c: use string hash from hash.h for po_hash
+ po_hash code duplicates the str_hash code in hash.h for no good reason.
+
+ * read.c (struct po_entry, po_entry_t): Delete.
+ (hash_po_entry, eq_po_entry, po_entry_alloc, po_entry_find): Delete.
+ (pop_insert): Use str_hash_insert.
+ (pobegin): Use str_htab_create.
+ (read_a_source_file, s_macro): Use str_hash_find.
+
+2022-07-09 Alan Modra <amodra@gmail.com>
+
+ free read_symbol_name string
+ read_symbol_name mallocs the string it returns. Free it when done.
+
+ * read.c (read_symbol_name): Free name on error path.
+ * config/tc-ppc.c (ppc_GNU_visibility): Free name returned from
+ read_symbol_name.
+ (ppc_extern, ppc_globl, ppc_weak): Likewise.
+
+2022-07-09 Alan Modra <amodra@gmail.com>
+
+ gas: output_file_close
+ This is mostly a tidy with the aim of being able to free
+ out_file_name, but it does fix a possible attempt to unlink the output
+ file twice (not that that matters).
+
+ * as.h (keep_it): New global.
+ * as.c (keep_it): Delete.
+ (close_output_file): Delete, merged into..
+ * output-file.c (output_file_close): ..here. Delete parameter.
+ * output-file.h (output_file_close): Update prototype.
+
+2022-07-09 Alan Modra <amodra@gmail.com>
+
+ gas: utility notes memory alloc functions
+ Makes it a little easier to use the notes obstack for persistent
+ storage.
+
+ * as.h (gas_mul_overflow): Define.
+ * symbols.h (notes_alloc, notes_calloc, notes_memdup),
+ (notes_strdup, notes_concat, notes_free): Declare.
+ * symbols.c (notes_alloc, notes_calloc, notes_memdup),
+ (notes_strdup, notes_concat, notes_free): New functions.
+ (save_symbol_name): Use notes_strdup.
+ (symbol_create, local_symbol_make, local_symbol_convert),
+ (symbol_clone, decode_local_label_name): Use notes_alloc.
+
+2022-07-09 Alan Modra <amodra@gmail.com>
+
+ gas: arm -mwarn-syms duplicates
+ arm gas is only supposed to warn once per symbol for -mwarn-syms, but
+ doesn't because the str_hash_find added with commit 629310abec88
+ always returns NULL. That's so because the str_hash_insert inserts a
+ NULL value for the key,value pair. Let str_hash_insert do the job
+ instead.
+
+ * config/tc-arm.c (arm_tc_equal_in_insn): Correct already_warned
+ logic.
+ * testsuite/gas/arm/pr18347.s: Modify to generate duplicate
+ warning without this patch.
+
+2022-07-09 Alan Modra <amodra@gmail.com>
+
+ Regenerate with automake-1.15.1
+ Until we update the recommended versions of autoconf/automake, files
+ should be regenerated with automake-1.15.1 and autoconf-2.69. That's
+ not because we think those versions are golden, and newer versions are
+ bad. It's simply because maintainers want to be able to update
+ configury files without trouble, and if someone regenerates files with
+ automake-1.16.5 then --enable-maintainer-mode builds will hit errors:
+
+ checking that generated files are newer than configure... configure.ac:26: error: version mismatch. This is Automake 1.15.1,
+ configure.ac:26: but the definition used by this AM_INIT_AUTOMAKE
+ configure.ac:26: comes from Automake 1.16.5. You should recreate
+ configure.ac:26: aclocal.m4 with aclocal and run automake again.
+ WARNING: 'automake-1.15' is probably too old.
+
+ Correcting this requires regenerating the files by hand.
+
+2022-07-09 GDB Administrator <gdbadmin@sourceware.org>
+
+ Automatic date update in version.in
+
+2022-07-08 Tom Tromey <tom@tromey.com>
+
+ Accept gdb.Value in more Python APIs
+ PR python/27000 points out that gdb.block_for_pc will accept a Python
+ integer, but not a gdb.Value. This patch corrects this oversight.
+
+ I looked at all uses of GDB_PY_LLU_ARG and fixed these up to use
+ get_addr_from_python instead. I also looked at uses of GDB_PY_LL_ARG,
+ but those seemed relatively unlikely to be useful with a gdb.Value, so
+ I didn't change them. My thinking here is that a Value will typically
+ come from inferior memory, and something like a line number is not too
+ likely to be found this way.
+
+ Bug: https://sourceware.org/bugzilla/show_bug.cgi?id=27000
+
+2022-07-08 Tom Tromey <tom@tromey.com>
+
+ Handle bool specially in gdb.set_parameter
+ PR python/29217 points out that gdb.parameter will return bool values,
+ but gdb.set_parameter will not properly accept them. This patch fixes
+ the problem by adding a special case to set_parameter.
+
+ I looked at a fix involving rewriting set_parameter in C++. However,
+ this one is simpler.
+
+ Bug: https://sourceware.org/bugzilla/show_bug.cgi?id=29217
+
+2022-07-08 Ludovic Courtès <ludo@gnu.org>
+
+ [gdb/build] Handle deprecation of scm_install_gmp_memory_functions
+ When building gdb with guile 3.0.8, we run into:
+ ...
+ gdb/guile/guile.c: In function \
+ 'void gdbscm_initialize(const extension_language_defn*)':
+ gdb/guile/guile.c:680:5: error: 'scm_install_gmp_memory_functions' is \
+ deprecated [-Werror=deprecated-declarations]
+ 680 | scm_install_gmp_memory_functions = 0;
+ | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+ In file included from /usr/include/guile/3.0/libguile.h:128,
+ from gdb/guile/guile-internal.h:30,
+ from gdb/guile/guile.c:36:
+ /usr/include/guile/3.0/libguile/deprecated.h:164:20: note: declared here
+ 164 | SCM_DEPRECATED int scm_install_gmp_memory_functions;
+ | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+ cc1plus: all warnings being treated as errors
+ make[1]: *** [Makefile:1896: guile/guile.o] Error 1
+ ...
+
+ The variable has been deprecated because it no longer has any effect.
+
+ Fix this by disabling the specific deprecation warning.
+
+ Also handle upcoming guile versions > 3.0, in which the variable will be
+ removed, by limiting the usage of the variable to guile versions <= 3.0.
+
+ This does not break anything. The variable was merely used to address a
+ problem present in guile versions <= v3.0.5.
+
+ Note that we don't limit the usage of the variable to guile versions <= 3.0.5,
+ because we want to support f.i. building against 3.0.6 and then using a shared
+ lib with 3.0.5.
+
+ Tested on x86_64-linux.
+
+ Co-Authored-By: Tom de Vries <tdevries@suse.de>
+
+ Bug: https://sourceware.org/bugzilla/show_bug.cgi?id=28994
+
+2022-07-08 Tom de Vries <tdevries@suse.de>
+
+ [gdb/symtab] Fix assert in process_imported_unit_die
+ When running test-case gdb.dwarf2/dw2-symtab-includes.exp with target board
+ cc-with-debug-names, I run into:
+ ...
+ (gdb) maint expand-symtab dw2-symtab-includes.h^M
+ src/gdb/dwarf2/read.h:311: internal-error: unit_type: \
+ Assertion `m_unit_type != 0' failed.^M
+ A problem internal to GDB has been detected,^M
+ further debugging may prove unreliable.^M
+ ----- Backtrace -----^M
+ FAIL: gdb.dwarf2/dw2-symtab-includes.exp: maint expand-symtab \
+ dw2-symtab-includes.h (GDB internal error)
+ ...
+
+ The assert was recently added in commit 2c474c46943 ("[gdb/symtab] Add get/set
+ functions for per_cu->lang/unit_type").
+
+ The assert is triggered here:
+ ...
+ /* We're importing a C++ compilation unit with tag DW_TAG_compile_unit
+ into another compilation unit, at root level. Regard this as a hint,
+ and ignore it. */
+ if (die->parent && die->parent->parent == NULL
+ && per_cu->unit_type () == DW_UT_compile
+ && per_cu->lang () == language_cplus)
+ return;
+ ...
+
+ We're trying to access unit_type / lang which hasn't been set yet.
+
+ Normally, these are set during cooked index creation, but that's not the case
+ when using an index (or using -readnow).
+
+ In other words, this lto binary reading speed optimization only works in the
+ normal use case.
+
+ IWBN to have this working in all use cases, but for now, allow lang () and
+ unit_type () to return language_unknown and 0 here.
+
+ Tested on x86_64-linux.
+
+ Bug: https://sourceware.org/bugzilla/show_bug.cgi?id=29321
+
+2022-07-08 Tom de Vries <tdevries@suse.de>
+
+ [gdb/symtab] Fix segfault in dwarf2_per_objfile::symtab_set_p
+ When running test-case gdb.cp/cpexprs-debug-types.exp with target board
+ cc-with-debug-names, I run into:
+ ...
+ (gdb) print base::operator new^M
+ ^M
+ ^M
+ Fatal signal: Segmentation fault^M
+ ----- Backtrace -----^M
+ 0x57ea46 gdb_internal_backtrace_1^M
+ /home/vries/gdb_versions/devel/src/gdb/bt-utils.c:122^M
+ 0x57eae9 _Z22gdb_internal_backtracev^M
+ /home/vries/gdb_versions/devel/src/gdb/bt-utils.c:168^M
+ 0x75b8ad handle_fatal_signal^M
+ /home/vries/gdb_versions/devel/src/gdb/event-top.c:946^M
+ 0x75ba19 handle_sigsegv^M
+ /home/vries/gdb_versions/devel/src/gdb/event-top.c:1019^M
+ 0x7f795f46a8bf ???^M
+ 0x6d3cb1 _ZNK18dwarf2_per_objfile12symtab_set_pEPK18dwarf2_per_cu_data^M
+ /home/vries/gdb_versions/devel/src/gdb/dwarf2/read.c:1515^M
+ ...
+
+ The problem is in this piece of code in dw2_debug_names_iterator::next:
+ ...
+ case DW_IDX_type_unit:
+ /* Don't crash on bad data. */
+ if (ull >= per_bfd->tu_stats.nr_tus)
+ {
+ complaint (_(".debug_names entry has bad TU index %s"
+ " [in module %s]"),
+ pulongest (ull),
+ objfile_name (objfile));
+ continue;
+ }
+ per_cu = per_bfd->get_cu (ull + per_bfd->tu_stats.nr_tus);
+ break;
+ ...
+
+ The all_comp_units vector (which get_cu accesses) contains both CUs and TUs,
+ with CUs first.
+
+ So to get the nth TU we need the element at "nr_cus + n", but
+ the code uses "nr_tus + n" instead.
+
+ Fix this by using "nr_cus + n".
+
+ Tested on x86_64-linux.
+
+ Bug: https://sourceware.org/bugzilla/show_bug.cgi?id=29334
+
+2022-07-08 Enze Li <enze.li@hotmail.com>
+
+ gdb: initialize the data_head variable to eliminate compilation warnings
+ On a machine with gcc 12, I get this warning:
+
+ CXX nat/linux-btrace.o
+ In function ‘btrace_error linux_read_bts(btrace_data_bts*, btrace_target_info*, btrace_read_type)’,
+ inlined from ‘btrace_error linux_read_btrace(btrace_data*, btrace_target_info*, btrace_read_type)’ at ../gdb/nat/linux-btrace.c:935:29:
+ ../gdb/nat/linux-btrace.c:865:21: warning: ‘data_head’ may be used uninitialized [-Wmaybe-uninitialized]
+ 865 | pevent->last_head = data_head;
+ | ~~~~~~~~~~~~~~~~~~^~~~~~~~~~~
+ ../gdb/nat/linux-btrace.c: In function ‘btrace_error linux_read_btrace(btrace_data*, btrace_target_info*, btrace_read_type)’:
+ ../gdb/nat/linux-btrace.c:792:9: note: ‘data_head’ was declared here
+ 792 | __u64 data_head, data_tail;
+ | ^~~~~~~~~
+
+ Fix this by initializing the 'data_head' variable.
+
+ Tested by rebuilding on x86_64 openSUSE Tumbleweed with gcc 12.
+
+2022-07-08 Andrew Burgess <aburgess@redhat.com>
+
+ libopcodes/s390: add support for disassembler styling
+ This commit adds disassembler style to the libopcodes s390
+ disassembler. This conversion was pretty straight forward, I just
+ converted the fprintf_func calls to fprintf_styled_func calls and
+ added an appropriate style.
+
+ For testing the new styling I just assembled then disassembled the
+ source files in gas/testsuite/gas/s390 and manually checked that the
+ styling looked reasonable.
+
+ If the user does not request styled output from objdump, then there
+ should be no change in the disassembler output after this commit.
+
+2022-07-08 Nick Clifton <nickc@redhat.com>
+
+ Fix regeneration of ld configure and makefiles
+
+ Update release README with new version numbers
+
+ Update version to 2.39.50 and regenerate files
+
+ Add markers for 2.39 branch
+
+2022-07-08 GDB Administrator <gdbadmin@sourceware.org>
+
+ Automatic date update in version.in
+
+2022-07-07 Vladimir Mezentsev <vladimir.mezentsev@oracle.com>
+
+ gprofng: fix regression in testing for not yet installed version
+ gprofng/ChangeLog
+ 2022-07-07 Vladimir Mezentsev <vladimir.mezentsev@oracle.com>
+
+ * src/Settings.cc (Settings::read_rc): Read environment variable
+ GPROFNG_SYSCONFDIR.
+ * testsuite/lib/Makefile.skel: Export GPROFNG_SYSCONFDIR.
+ * testsuite/gprofng.display/display.exp: Shorten the list of tests.
+
+2022-07-07 Simon Marchi <simon.marchi@efficios.com>
+
+ gdb: fix {rs6000_nat_target,aix_thread_target}::wait to not use inferior_ptid
+ Trying to run a simple program (empty main) on AIX, I get:
+
+ (gdb) run
+ Starting program: /scratch/simark/build/gdb/a.out
+ Child process unexpectedly missing: There are no child processes..
+ ../../src/binutils-gdb/gdb/inferior.c:304: internal-error: find_inferior_pid: Assertion `pid != 0' failed.
+ A problem internal to GDB has been detected,
+ further debugging may prove unreliable.
+ ----- Backtrace -----
+ 0x10ef12a8 gdb_internal_backtrace_1()
+ ../../src/binutils-gdb/gdb/bt-utils.c:122
+ 0x10ef1470 gdb_internal_backtrace()
+ ../../src/binutils-gdb/gdb/bt-utils.c:168
+ 0x1004d368 internal_vproblem(internal_problem*, char const*, int, char const*, char*)
+ ../../src/binutils-gdb/gdb/utils.c:396
+ 0x1004d8a8 internal_verror(char const*, int, char const*, char*)
+ ../../src/binutils-gdb/gdb/utils.c:476
+ 0x1004c424 internal_error(char const*, int, char const*, ...)
+ ../../src/binutils-gdb/gdbsupport/errors.cc:55
+ 0x102ab344 find_inferior_pid(process_stratum_target*, int)
+ ../../src/binutils-gdb/gdb/inferior.c:304
+ 0x102ab4a4 find_inferior_ptid(process_stratum_target*, ptid_t)
+ ../../src/binutils-gdb/gdb/inferior.c:318
+ 0x1061bae8 find_thread_ptid(process_stratum_target*, ptid_t)
+ ../../src/binutils-gdb/gdb/thread.c:519
+ 0x10319e98 handle_inferior_event(execution_control_state*)
+ ../../src/binutils-gdb/gdb/infrun.c:5532
+ 0x10315544 fetch_inferior_event()
+ ../../src/binutils-gdb/gdb/infrun.c:4221
+ 0x10952e34 inferior_event_handler(inferior_event_type)
+ ../../src/binutils-gdb/gdb/inf-loop.c:41
+ 0x1032640c infrun_async_inferior_event_handler(void*)
+ ../../src/binutils-gdb/gdb/infrun.c:9548
+ 0x10673188 check_async_event_handlers()
+ ../../src/binutils-gdb/gdb/async-event.c:335
+ 0x1066fce4 gdb_do_one_event()
+ ../../src/binutils-gdb/gdbsupport/event-loop.cc:214
+ 0x10001a94 start_event_loop()
+ ../../src/binutils-gdb/gdb/main.c:411
+ 0x10001ca0 captured_command_loop()
+ ../../src/binutils-gdb/gdb/main.c:471
+ 0x10003d74 captured_main(void*)
+ ../../src/binutils-gdb/gdb/main.c:1329
+ 0x10003e48 gdb_main(captured_main_args*)
+ ../../src/binutils-gdb/gdb/main.c:1344
+ 0x10000744 main
+ ../../src/binutils-gdb/gdb/gdb.c:32
+ ---------------------
+ ../../src/binutils-gdb/gdb/inferior.c:304: internal-error: find_inferior_pid: Assertion `pid != 0' failed.
+ A problem internal to GDB has been detected,
+ further debugging may prove unreliable.
+ Quit this debugging session? (y or n)
+
+ This is due to some bit-rot in the AIX port, still relying on the entry
+ value of inferior_ptid in the wait methods.
+
+ Problem #1 is in rs6000_nat_target::wait, here:
+
+ /* Ignore terminated detached child processes. */
+ if (!WIFSTOPPED (status) && pid != inferior_ptid.pid ())
+ pid = -1;
+
+ At this point, waitpid has returned an "exited" status for some pid, so
+ pid is non-zero. Since inferior_ptid is set to null_ptid on entry, the
+ pid returned by wait is not equal to `inferior_ptid.pid ()`, so we reset
+ pid to -1 and go to waiting again. Since there are not more children to
+ wait for, waitpid then returns -1 so we get here:
+
+ if (pid == -1)
+ {
+ gdb_printf (gdb_stderr,
+ _("Child process unexpectedly missing: %s.\n"),
+ safe_strerror (save_errno));
+
+ /* Claim it exited with unknown signal. */
+ ourstatus->set_signalled (GDB_SIGNAL_UNKNOWN);
+ return inferior_ptid;
+ }
+
+ We therefore return a "signalled" status with a null_ptid (again,
+ inferior_ptid is null_ptid). This confuses infrun, because if the
+ target returns a "signalled" status, it should be coupled with a ptid
+ for an inferior that exists.
+
+ So, the first step is to fix the snippets above to not use
+ inferior_ptid. In the first snippet, use find_inferior_pid to see if
+ we know the event process. If there is no inferior with that pid, we
+ assume it's a detached child process to we ignore the event. That
+ should be enough to fix the problem, because it should make it so we
+ won't go into the second snippet. But still, fix the second snippet to
+ return an "ignore" status. This is copied from inf_ptrace_target::wait,
+ which is where rs6000_nat_target::wait appears to be copied from in the
+ first place.
+
+ These changes, are not sufficient, as the aix_thread_target, which sits
+ on top of rs6000_nat_target, also relies on inferior_ptid.
+ aix_thread_target::wait, by calling pd_update, assumes that
+ rs6000_nat_target has set inferior_ptid to the appropriate value (the
+ ptid of the event thread), but that's not the case. pd_update
+ returns inferior_ptid - null_ptid - and therefore
+ aix_thread_target::wait returns null_ptid too, and we still hit the
+ assert shown above.
+
+ Fix this by changing pd_activate, pd_update, sync_threadlists and
+ get_signaled_thread to all avoid using inferior_ptid. Instead, they
+ accept as a parameter the pid of the process we are working on.
+
+ With this patch, I am able to run the program to completion:
+
+ (gdb) r
+ Starting program: /scratch/simark/build/gdb/a.out
+ [Inferior 1 (process 11010794) exited normally]
+
+ As well as break on main:
+
+ (gdb) b main
+ Breakpoint 1 at 0x1000036c
+ (gdb) r
+ Starting program: /scratch/simark/build/gdb/a.out
+
+ Breakpoint 1, 0x1000036c in main ()
+ (gdb) c
+ Continuing.
+ [Inferior 1 (process 26083688) exited normally]
+
+ Change-Id: I7c2613bbefe487d75fa1a0c0994423471d961ee9
+
+2022-07-07 Pedro Alves <pedro@palves.net>
+
+ Fix pedantically invalid DWARF in gdb.trace/unavailable-dwarf-piece.exp
+ The DWARF spec says:
+
+ Any debugging information entry representing the declaration of an object,
+ module, subprogram or type may have DW_AT_decl_file, DW_AT_decl_line and
+ DW_AT_decl_column attributes, each of whose value is an unsigned integer
+ ^^^^^^^^
+ constant.
+
+ Grepping around the DWARF-assembler-based testcases, I noticed that
+ gdb.trace/unavailable-dwarf-piece.exp emits decl_line with
+ DW_FORM_sdata, a signed integer form. This commit tweaks it to use
+ DW_FORM_udata instead.
+
+ Unsurprisingly, this:
+
+ $ make check \
+ TESTS="gdb.trace/unavailable-dwarf-piece.exp" \
+ RUNTESTFLAGS="--target_board=native-gdbserver"
+
+ ... still passes cleanly for me after this change.
+
+ I've noticed this because current llvm-dwarfdump crashed on an
+ ROCm-internal DWARF-assembler-based testcase that incorrectly used
+ signed forms for DW_AT_decl_file/DW_AT_decl_line.
+
+ The older llvm-dwarfdump found on Ubuntu 20.04 (LLVM 10) reads the
+ line numbers with signed forms as "0" instead of crashing. Here's the
+ before/after fix for gdb.trace/unavailable-dwarf-piece.exp with that
+ llvm-dwarfdump version:
+
+ $ diff -up before.txt after.txt
+ --- before.txt 2022-07-07 13:21:28.387690334 +0100
+ +++ after.txt 2022-07-07 13:21:39.379801092 +0100
+ @@ -18,7 +18,7 @@
+ DW_AT_name ("s")
+ DW_AT_byte_size (3)
+ DW_AT_decl_file (0)
+ - DW_AT_decl_line (0)
+ + DW_AT_decl_line (1)
+
+ 0x0000002f: DW_TAG_member
+ DW_AT_name ("a")
+ @@ -41,7 +41,7 @@
+ DW_AT_name ("t")
+ DW_AT_byte_size (3)
+ DW_AT_decl_file (0)
+ - DW_AT_decl_line (0)
+ + DW_AT_decl_line (1)
+
+ 0x00000054: DW_TAG_member
+ DW_AT_name ("a")
+
+ Change-Id: I5c866946356da421ff944019d0eca2607b2b738f
+
+2022-07-07 Tiezhu Yang <yangtiezhu@loongson.cn>
+
+ gdb: LoongArch: Fix typos in code comments
+ "it’s" should be "it's".
+
+2022-07-07 Maciej W. Rozycki <macro@embecosm.com>
+
+ GDB/testsuite: Add coverage for `print -elements' command
+ We currently have no coverage for the `print -elements ...' command (or
+ `p -elements ...' in the shortened form), so add a couple of test cases
+ mimicking ones using corresponding `set print elements ...' values.
+
+2022-07-07 Tiezhu Yang <yangtiezhu@loongson.cn>
+
+ gdb: LoongArch: Implement the push_dummy_call gdbarch method
+ According to "Procedure Calling Convention" in "LoongArch ELF ABI
+ specification" [1], implement the push_dummy_call gdbarch method
+ as clear as possible.
+
+ [1] https://loongson.github.io/LoongArch-Documentation/LoongArch-ELF-ABI-EN.html#_procedure_calling_convention
+
+2022-07-07 Tsukasa OI <research_trasio@irq.a4lg.com>
+
+ RISC-V: Added Zfhmin and Zhinxmin.
+ This commit adds Zfhmin and Zhinxmin extensions (subsets of Zfh and
+ Zhinx extensions, respectively). In the process supporting Zfhmin and
+ Zhinxmin extension, this commit also changes how instructions are
+ categorized considering Zfhmin, Zhinx and Zhinxmin extensions.
+
+ Detailed changes,
+
+ * From INSN_CLASS_ZFH to INSN_CLASS_ZFHMIN:
+
+ flh, fsh, fmv.x.h and fmv.h.x.
+
+ * From INSN_CLASS_ZFH to INSN_CLASS_ZFH_OR_ZHINX:
+
+ fmv.h.
+
+ * From INSN_CLASS_ZFH_OR_ZHINX to INSN_CLASS_ZFH_OR_ZHINX:
+
+ fneg.h, fabs.h, fsgnj.h, fsgnjn.h, fsgnjx.h,
+ fadd.h, fsub.h, fmul.h, fdiv.h, fsqrt.h, fmin.h, fmax.h,
+ fmadd.h, fnmadd.h, fmsub.h, fnmsub.h,
+ fcvt.w.h, fcvt.wu.h, fcvt.h.w, fcvt.h.wu,
+ fcvt.l.h, fcvt.lu.h, fcvt.h.l, fcvt.h.lu,
+ feq.h, flt.h, fle.h, fgt.h, fge.h,
+ fclass.h.
+
+ * From INSN_CLASS_ZFH_OR_ZHINX to INSN_CLASS_ZFHMIN_OR_ZHINXMIN:
+
+ fcvt.s.h and fcvt.h.s.
+
+ * From INSN_CLASS_D_AND_ZFH_INX to INSN_CLASS_ZFHMIN_AND_D:
+
+ fcvt.d.h and fcvt.h.d.
+
+ * From INSN_CLASS_Q_AND_ZFH_INX to INSN_CLASS_ZFHMIN_AND_Q:
+
+ fcvt.q.h and fcvt.h.q.
+
+ bfd/ChangeLog:
+
+ * elfxx-riscv.c (riscv_implicit_subsets): Change implicit
+ subsets. Zfh->Zicsr is not needed and Zfh->F is replaced with
+ Zfh->Zfhmin and Zfhmin->F. Zhinx->Zicsr is not needed and
+ Zhinx->Zfinx is replaced with Zhinx->Zhinxmin and
+ Zhinxmin->Zfinx.
+ (riscv_supported_std_z_ext): Added zfhmin and zhinxmin.
+ (riscv_multi_subset_supports): Rewrite handling for new
+ instruction classes.
+ (riscv_multi_subset_supports_ext): Updated.
+ (riscv_parse_check_conflicts): Change error message to include
+ zfh and zfhmin extensions.
+
+ gas/ChangeLog:
+
+ * testsuite/gas/riscv/zfhmin-d-insn-class-fail.s: New complex
+ error handling test.
+ * testsuite/gas/riscv/zfhmin-d-insn-class-fail-1.d: Likewise.
+ * testsuite/gas/riscv/zfhmin-d-insn-class-fail-1.l: Likewise.
+ * testsuite/gas/riscv/zfhmin-d-insn-class-fail-2.d: Likewise.
+ * testsuite/gas/riscv/zfhmin-d-insn-class-fail-2.l: Likewise.
+ * testsuite/gas/riscv/zfhmin-d-insn-class-fail-3.d: Likewise.
+ * testsuite/gas/riscv/zfhmin-d-insn-class-fail-3.l: Likewise.
+ * testsuite/gas/riscv/zfhmin-d-insn-class-fail-4.d: Likewise.
+ * testsuite/gas/riscv/zfhmin-d-insn-class-fail-4.l: Likewise.
+ * testsuite/gas/riscv/zfhmin-d-insn-class-fail-5.d: Likewise.
+ * testsuite/gas/riscv/zfhmin-d-insn-class-fail-5.l: Likewise.
+ * testsuite/gas/riscv/zhinx.d: Renamed from fp-zhinx-insns.d
+ and refactored.
+ * testsuite/gas/riscv/zhinx.s: Likewise.
+
+ include/ChangeLog:
+
+ * opcode/riscv.h (enum riscv_insn_class): Removed INSN_CLASS_ZFH,
+ INSN_CLASS_D_AND_ZFH_INX and INSN_CLASS_Q_AND_ZFH_INX. Added
+ INSN_CLASS_ZFHMIN, INSN_CLASS_ZFHMIN_OR_ZHINXMIN,
+ INSN_CLASS_ZFHMIN_AND_D and INSN_CLASS_ZFHMIN_AND_Q.
+
+ opcodes/ChangeLog:
+
+ * riscv-opc.c (riscv_opcodes): Change instruction classes for
+ Zfh and Zfhmin instructions. Fix `fcvt.h.lu' instruction
+ (two operand variant) mask.
+
+2022-07-07 Vladimir Mezentsev <vladimir.mezentsev@oracle.com>
+
+ gprofng: adjust GPROFNG_VARIANT
+ GPROFNG_VARIANT depends on compiler options, not on $(host).
+
+ gprofng/ChangeLog
+ 2022-07-06 Vladimir Mezentsev <vladimir.mezentsev@oracle.com>
+
+ PR gprofng/29116
+ * libcollector/configure.ac: Adjust GPROFNG_VARIANT.
+ * libcollector/configure: Rebuild.
+
+2022-07-07 Tsukasa OI <research_trasio@irq.a4lg.com>
+
+ RISC-V: Fix disassembling Zfinx with -M numeric
+ This commit fixes floating point operand register names from ABI ones
+ to dynamically set ones.
+
+ gas/ChangeLog:
+
+ * testsuite/gas/riscv/zfinx-dis-numeric.s: Test new behavior of
+ Zfinx extension and -M numeric disassembler option.
+ * testsuite/gas/riscv/zfinx-dis-numeric.d: Likewise.
+
+ opcodes/ChangeLog:
+
+ * riscv-dis.c (riscv_disassemble_insn): Use dynamically set GPR
+ names to disassemble Zfinx instructions.
+
+2022-07-07 Tsukasa OI <research_trasio@irq.a4lg.com>
+
+ RISC-V: Fix requirement handling on Zhinx+{D,Q}
+ This commit fixes how instructions are masked on Zhinx+Z{d,q}inx.
+ fcvt.h.d and fcvt.d.h require ((D&&Zfh)||(Zdinx&&Zhinx)) and
+ fcvt.h.q and fcvt.q.h require ((Q&&Zfh)||(Zqinx&&Zhinx)).
+
+ bfd/ChangeLog:
+
+ * elfxx-riscv.c (riscv_multi_subset_supports): Fix feature gate
+ on INSN_CLASS_{D,Q}_AND_ZFH_INX.
+ (riscv_multi_subset_supports_ext): Fix feature gate diagnostics
+ on INSN_CLASS_{D,Q}_AND_ZFH_INX.
+
+ gas/ChangeLog:
+
+ * testsuite/gas/riscv/fp-zhinx-insns.d: Add Zqinx to -march
+ for proper testing.
+
+2022-07-07 Alan Modra <amodra@gmail.com>
+
+ PR29320, 'struct obstack' declared inside parameter list
+ PR 29320
+ * frags.h: Move declaration of struct obstack..
+ * as.h: ..to here.
+
+2022-07-07 GDB Administrator <gdbadmin@sourceware.org>
+
+ Automatic date update in version.in
+
+2022-07-06 Ruud van der Pas <ruud.vanderpas@oracle.com>
+
+ gprofng: implement a functional gp-display-html
+ This patch enables the first support for the "gprofng display html" command.
+ This command works for C/C++ applications on x86_64. Using one or more gprofng
+ experiment directories as input, a new directory with html files is created.
+ Through the index.html file in this directory, the performance results may be
+ viewed in a browser.
+
+ gprofng/Changelog:
+ 2022-06-28 Ruud van der Pas <ruud.vanderpas@oracle.com>
+
+ * gp-display-html/gp-display-html.in: implement first support for x86_64 and C/C++
+
+2022-07-06 H.J. Lu <hjl.tools@gmail.com>
+
+ elf: Copy p_align of PT_GNU_STACK for stack alignment
+ commit 74e315dbfe5200c473b226e937935fb8ce391489
+ Author: H.J. Lu <hjl.tools@gmail.com>
+ Date: Mon Dec 13 19:46:04 2021 -0800
+
+ elf: Set p_align to the minimum page size if possible
+
+ may ignore p_align of PT_GNU_STACK when copying ELF program header if
+ the maximum page size is larger than p_align of PT_LOAD segments. Copy
+ p_align of PT_GNU_STACK since p_align of PT_GNU_STACK describes stack
+ alignment, not page size,
+
+ PR binutils/29319
+ * elf.c (copy_elf_program_header): Copy p_align of PT_GNU_STACK
+ for stack alignment.
+
+2022-07-06 Jan Beulich <jbeulich@suse.com>
+
+ x86: make D attribute usable for XOP and FMA4 insns
+ This once again allows to reduce redundancy in (and size of) the opcode
+ table.
+
+ Don't go as far as also making D work on the two 5-operand XOP insns:
+ This would significantly complicate the code, as there the first
+ (immediate) operand would need special treatment in several places.
+
+ Note that the .s suffix isn't being enabled to have any effect, for
+ being deprecated. Whereas neither {load} nor {store} pseudo prefixes
+ make sense here, as the respective operands are inputs (loads) only
+ anyway, regardless of order. Hence there is (as before) no way for the
+ programmer to request the alternative encoding to be used for register-
+ only insns.
+
+ Note further that it is always the first original template which is
+ retained (and altered), to make sure the same encoding as before is
+ used for register-only insns. This has the slightly odd (but pre-
+ existing) effect of XOP register-only insns having XOP.W clear, but FMA4
+ ones having VEX.W set.
+
+2022-07-06 Jan Beulich <jbeulich@suse.com>
+
+ x86: fold two switch() statements in match_template()
+ I don't see why two of them were introduced (very long ago) using
+ similar fall-through logic.
+
+2022-07-06 Jan Beulich <jbeulich@suse.com>
+
+ x86: fix 3-operand insn reverse-matching
+ The middle operand would have gone entirely unchecked, allowing e.g.
+
+ vmovss %xmm0, %esp, %xmm2
+
+ to assemble successfully, or e.g.
+
+ vmovss %xmm0, $4, %xmm2
+
+ causing an internal error. Alongside dealing with this also drop a
+ related comment, which hasn't been applicable anymore since the
+ introduction of 3-operand patterns with D set (and which perhaps never
+ had been logical to be there, as reverse-matched insns don't make it
+ there in the first place).
+
+2022-07-06 Bhuvanendra Kumar N <Bhuvanendra.KumarN@amd.com>
+
+ Descriptive DWARF operations dump support for DW_AT_rank
+ DW_AT_rank is a dwarf-5 feature.
+
+2022-07-06 Jan Beulich <jbeulich@suse.com>
+
+ x86: introduce a state stack for .arch
+ When using just slightly non-trivial combinations of .arch, it can be
+ quite useful to be able to go back to prior state without needing to
+ re-invoke perhaps many earlier directives and without needing to invoke
+ perhaps many "negative" ones. Like some other architectures allow
+ saving (pushing) and restoring (popping) present/prior state.
+
+ For now require the same .code<N> to be in effect for ".arch pop" that
+ was in effect for the corresponding ".arch push".
+
+ Also change the global "no_cond_jump_promotion" to be bool, to match the
+ new struct field.
+
+2022-07-06 Jan Beulich <jbeulich@suse.com>
+
+ x86: generalize disabling of sub-architectures
+ I never really understood upon what basis ".arch .no*" options were made
+ available. Let's not have any "criteria" at all, and simply allow
+ disabling of all of them. Then we also have all data for a sub-arch in
+ a single place, as we now only need a single table.
+
+2022-07-06 Jan Beulich <jbeulich@suse.com>
+
+ x86: permit "default" with .arch
+ So far there was no way to reset the architecture to that assembly would
+ start with in the absence of any overrides (command line or directives).
+ Note that for Intel MCU "default" is merely an alias of "iamcu".
+
+ While there also zap a stray @item from the doc section, as noticed
+ when inspecting the generated output (which still has some quirks, but
+ those aren't easy to address without re-flowing almost the entire
+ section).
+
+2022-07-06 Jan Beulich <jbeulich@suse.com>
+
+ x86: don't leak sub-architecture accumulated strings
+ While it may not be necessary in i386_target_format() (but then setting
+ the variable to NULL also wouldn't be necessary), at least in the other
+ cases strings may already have accumulated.
+
+2022-07-06 GDB Administrator <gdbadmin@sourceware.org>
+
+ Automatic date update in version.in
+
+2022-07-05 Tom de Vries <tdevries@suse.de>
+
+ [gdb/exp] Fix internal error when printing C++ pointer-to-member
+ When running the test-case included with this patch, we run into:
+ ...
+ (gdb) print ptm^M
+ $1 = gdb/gdbtypes.h:695: internal-error: loc_bitpos: \
+ Assertion `m_loc_kind == FIELD_LOC_KIND_BITPOS' failed.^M
+ ...
+ while printing a c++ pointer-to-member.
+
+ Fix this by skipping static fields in cp_find_class_member, such that we have:
+ ...
+ (gdb) print ptm^M
+ $1 = &A::i^M
+ ...
+
+ Tested on x86_64-linux.
+
+ Bug: https://sourceware.org/bugzilla/show_bug.cgi?id=29294
+
+2022-07-05 Tom Tromey <tromey@adacore.com>
+
+ Add gdb.Objfile.is_file attribute
+ Sometimes an objfile comes from memory and not from a file. It can be
+ useful to be able to check this from Python, so this patch adds a new
+ "is_file" attribute.
+
+2022-07-05 Tom Tromey <tromey@adacore.com>
+
+ Make 'import gdb.events' work
+ Pierre-Marie noticed that, while gdb.events is a Python module, it
+ can't be imported. This patch changes how this module is created, so
+ that it can be imported, while also ensuring that the module is always
+ visible, just as it was in the past.
+
+ This new approach required one non-obvious change -- when running
+ gdb.base/warning.exp, where --data-directory is intentionally not
+ found, the event registries can now be nullptr. Consequently, this
+ patch probably also requires
+
+ https://sourceware.org/pipermail/gdb-patches/2022-June/189796.html
+
+ Note that this patch obsoletes
+
+ https://sourceware.org/pipermail/gdb-patches/2022-June/189797.html
+
+2022-07-05 Xi Ruoyao <xry111@xry111.site>
+
+ gdb: LoongArch: add orig_a0 into register set
+ The basic support for LoongArch has been merged into the upstream Linux
+ kernel since 5.19-rc1 on June 5, 2022. This commit adds orig_a0 which
+ is added into struct user_pt_regs [1] to match the upstream kernel, and
+ then the upstream GDB will work with the upstream kernel.
+
+ Note that orig_a0 was added into struct user_pt_regs in the development
+ cycle for merging LoongArch port into the upstream Linux kernel, so
+ earlier kernels (notably, the product kernel with version 4.19 used in
+ distros like UOS and Loongnix) don't have it. Inspect
+ arch/loongarch/include/uapi/asm/ptrace.h in the kernel tree to make sure.
+ To build upstream GDB for a kernel lacking orig_a0, it's necessary to
+ revert this commit locally.
+
+ [1]: https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/tree/arch/loongarch/include/uapi/asm/ptrace.h#n24
+
+2022-07-05 Bhuvanendra Kumar N <Bhuvanendra.KumarN@amd.com>
+
+ Support for location and range lists for split-dwarf and dwarf-5.
+ Adding support for location and range lists for split-dwarf and dwarf-5.
+ Following issues are taken care.
+ 1. Display of the index values for DW_FORM_loclistx and DW_FORM_rnglistx.
+ 2. Display of .debug_loclists.dwo and .debug_rnglists.dwo sections.
+
+ * dwarf.c(read_and_display_attr_value): Handle DW_FORM_loclistx
+ and DW_FORM_rnglistx for .dwo files.
+ (process_debug_info): Load .debug_loclists.dwo and
+ .debug_rnglists.dwo if exists.
+ (load_separate_debug_files): Load .debug_loclists and
+ .debug_rnglists if exists.
+ Include 2 entries in debug_displays table.
+ * dwarf.h (enum dwarf_section_display_enum): Include 2 entries.
+
+2022-07-05 Jan Beulich <jbeulich@suse.com>
+
+ x86: introduce fake processor type to mark sub-arch entries in cpu_arch[]
+ This is in preparation of dropping the leading . from the strings.
+
+ While there also move PROCESSOR_GENERIC{32,64} from the middle of AMD
+ entries to near the top.
+
+2022-07-05 Jan Beulich <jbeulich@suse.com>
+
+ x86: macro-ize cpu_arch[] entries
+ Putting individual elements behind macros, besides (imo) improving
+ readability, will make subsequent (and likely also future) changes less
+ intrusive.
+
+ Utilize this right away to pack the table a little more tightly, by
+ converting "skip" to bool and putting it earlier in a group of bitfields
+ together with "len".
+
+2022-07-05 Jan Beulich <jbeulich@suse.com>
+
+ x86: de-duplicate sub-architecture strings accumulation
+ Introduce a helper function to replace 4 instances of similar code. Use
+ reconcat() to cover the previously explicit free().
+
+2022-07-05 GDB Administrator <gdbadmin@sourceware.org>
+
+ Automatic date update in version.in
+
+2022-07-04 Nick Clifton <nickc@redhat.com>
+
+ Fix snafu in rust demangler recursion limit code
+
+2022-07-04 Alan Modra <amodra@gmail.com>
+
+ alloc gas seginfo on notes obstack
+ Lots of memory used in gas should go on this obstack. The patch also
+ frees all the gas obstacks on exit, which isn't a completely trivial
+ task.
+
+ * subsegs.c (alloc_seginfo): New function.
+ (subseg_change, subseg_get): Use it.
+ (subsegs_end): New function.
+ * as.h (subsegs_end): Declare.
+ * output-file.c: Include subsegs.h
+ (stash_frchain_obs): New function.
+ (output_file_close): Save obstacks attached to output bfd before
+ closing. Call subsegs_end with the array of obstacks.
+
+2022-07-04 Alan Modra <amodra@gmail.com>
+
+ objcopy: bfd_alloc orelocation
+ This fixes an inconsequential objcopy memory leak. I'd normally
+ ignore reports of leaks like this one, that are merely one block or
+ fewer per section processed, since objcopy soon exits and frees all
+ memory. However I thought it worth providing support for allocating
+ memory on a bfd objalloc in objcopy and other utils.
+
+ PR 29233
+ * bucomm.c (bfd_xalloc): New function.
+ * bucomm.h (bfd_xalloc): Declare.
+ * objcopy.c (copy_relocations_in_section): Use it to allocate
+ array of reloc pointers. Rewrite code stripping relocs to do
+ without extra memory allocation.
+
+2022-07-04 Nick Clifton <nickc@redhat.com>
+
+ Synchronize libbierty sources with gcc.
+
+2022-07-04 Bhuvanendra Kumar N <Bhuvanendra.KumarN@amd.com>
+
+ Modified changes for split-dwarf and dwarf-5.
+ * dwarf.c(process_debug_info): Include DW_TAG_skeleton_unit.
+ (display_debug_str_offsets): While dumping .debug_str_offsets.dwo,
+ pass proper str_offsets_base to fetch_indexed_string().
+ (load_separate_debug_files): Skip DWO ID dump for dwarf-5.
+
+2022-07-04 Marcus Nilsson <brainbomb@gmail.com>
+
+ opcodes/avr: Implement style support in the disassembler
+ * disassemble.c: (disassemble_init_for_target): Set
+ created_styled_output for AVR based targets.
+ * avr-dis.c: (print_insn_avr): Use fprintf_styled_ftype
+ instead of fprintf_ftype throughout.
+ (avr_operand): Pass in and fill disassembler_style when
+ parsing operands.
+
+2022-07-04 Tom de Vries <tdevries@suse.de>
+
+ [gdb/symtab] Add get/set functions for per_cu->lang/unit_type
+ The dwarf2_per_cu_data fields lang and unit_type both have a dont-know
+ initial value (respectively language_unknown and (dwarf_unit_type)0), which
+ allows us to add certain checks, f.i. checking that that a field is not read
+ before written.
+
+ Add get/set member functions for the two fields as a convenient location to
+ add such checks, make the fields private to enforce using the member
+ functions, and add the m_ prefix.
+
+ Tested on x86_64-linux.
+
+2022-07-04 Jan Beulich <jbeulich@suse.com>
+
+ gas/testsuite: properly exclude aout in all/weakref1u
+ Use the (wider) predicate rather than a triplet. This eliminates the sole
+ i386-msdos failure in the testsuite.
+
+2022-07-04 Jan Beulich <jbeulich@suse.com>
+
+ x86: fold Disp32S and Disp32
+ The only case where 64-bit code uses non-sign-extended (can also be
+ considered zero-extended) displacements is when an address size override
+ is in place for a memory operand (i.e. particularly excluding
+ displacements of direct branches, which - if at all - are controlled by
+ operand size, and then are still sign-extended, just from 16 bits).
+ Hence the distinction in templates is unnecessary, allowing code to be
+ simplified in a number of places. The only place where logic becomes
+ more complicated is when signed-ness of relocations is determined in
+ output_disp().
+
+ The other caveat is that Disp64 cannot be specified anymore in an insn
+ template at the same time as Disp32. Unlike for non-64-bit mode,
+ templates don't specify displacements for both possible addressing
+ modes; the necessary adjustment to the expected ones has already been
+ done in match_template() anyway (but of course the logic there needs
+ tweaking now). Hence the single template so far doing so is split.
+
+2022-07-04 Jan Beulich <jbeulich@suse.com>
+
+ x86: restore masking of displacement kinds
+ Commit 7d5e4556a375 rendered the check near the end of what is now
+ i386_finalize_displacement() entirely dead for AT&T mode, since for
+ operands involving a displacement .unspecified will always be set. But
+ the logic there is bogus anyway - Intel syntax operand size specifiers
+ are of no interest there either. The only thing which matters in the
+ "displacement only" determination is .baseindex.
+
+ Of course when masking displacement kinds we should not at the same time
+ also mask off other attributes.
+
+ Furthermore the type mask returned by lex_got() also needs to be
+ adjusted: The only case where we want Disp32 (rather than Disp32S) is
+ when dealing with 32-bit addressing mode in 64-bit code.
+
+2022-07-04 Jan Beulich <jbeulich@suse.com>
+
+ x86-64: improve handling of branches to absolute addresses
+ There are two related problems here: The use of "addr32" on a direct
+ branch would, besides causing a warning, result in operands to be
+ permitted which mistakenly are refused without "addr32". Plus at some
+ point not too long ago I'm afraid it may have been me who regressed the
+ relocation addends emitted for such branches. Correct both problems,
+ adding a testcase to guard against regressing this again.
+
+2022-07-04 Tsukasa OI <research_trasio@irq.a4lg.com>
+
+ RISC-V: Update Zihintpause extension version
+ Because ratified Zihintpause extension has a version number of 2.0
+ (not 1.0), we should update the number.
+
+ bfd/ChangeLog:
+
+ * elfxx-riscv.c (riscv_supported_std_z_ext): Update version
+ number of Zihintpause extension.
+
+2022-07-04 GDB Administrator <gdbadmin@sourceware.org>
+
+ Automatic date update in version.in
+
+2022-07-03 GDB Administrator <gdbadmin@sourceware.org>
+
+ Automatic date update in version.in
+
+2022-07-02 Tom de Vries <tdevries@suse.de>
+
+ [gdb/symtab] Fix data race on per_cu->dwarf_version
+ When building gdb with -fsanitize=thread and gcc 12, and running test-case
+ gdb.dwarf2/dwz.exp, we run into a data race between thread T2 and the main
+ thread in the same write:
+ ...
+ Write of size 1 at 0x7b200000300c:^M
+ #0 cutu_reader::cutu_reader(dwarf2_per_cu_data*, dwarf2_per_objfile*, \
+ abbrev_table*, dwarf2_cu*, bool, abbrev_cache*) gdb/dwarf2/read.c:6252 \
+ (gdb+0x82f3b3)^M
+ ...
+ which is here:
+ ...
+ this_cu->dwarf_version = cu->header.version;
+ ...
+
+ Both writes are called from the parallel for in dwarf2_build_psymtabs_hard,
+ this one directly:
+ ...
+ #1 process_psymtab_comp_unit gdb/dwarf2/read.c:6774 (gdb+0x8304d7)^M
+ #2 operator() gdb/dwarf2/read.c:7098 (gdb+0x8317be)^M
+ #3 operator() gdbsupport/parallel-for.h:163 (gdb+0x872380)^M
+ ...
+ and this via the PU import:
+ ...
+ #1 cooked_indexer::ensure_cu_exists(cutu_reader*, dwarf2_per_objfile*, \
+ sect_offset, bool, bool) gdb/dwarf2/read.c:17964 (gdb+0x85c43b)^M
+ #2 cooked_indexer::index_imported_unit(cutu_reader*, unsigned char const*, \
+ abbrev_info const*) gdb/dwarf2/read.c:18248 (gdb+0x85d8ff)^M
+ #3 cooked_indexer::index_dies(cutu_reader*, unsigned char const*, \
+ cooked_index_entry const*, bool) gdb/dwarf2/read.c:18302 (gdb+0x85dcdb)^M
+ #4 cooked_indexer::make_index(cutu_reader*) gdb/dwarf2/read.c:18443 \
+ (gdb+0x85e68a)^M
+ #5 process_psymtab_comp_unit gdb/dwarf2/read.c:6812 (gdb+0x830879)^M
+ #6 operator() gdb/dwarf2/read.c:7098 (gdb+0x8317be)^M
+ #7 operator() gdbsupport/parallel-for.h:171 (gdb+0x8723e2)^M
+ ...
+
+ Fix this by setting the field earlier, in read_comp_units_from_section.
+
+ The write in cutu_reader::cutu_reader() is still needed, in case
+ read_comp_units_from_section is not used (run the test-case with say, target
+ board cc-with-gdb-index).
+
+ Make the write conditional, such that it doesn't trigger if the field is
+ already set by read_comp_units_from_section. Instead, verify that the
+ field already has the value that we're trying to set it to.
+
+ Move this logic into into a member function set_version (in analogy to the
+ already present member function version) to make sure it's used consistenly,
+ and make the field private in order to enforce access through the member
+ functions, and rename it to m_dwarf_version.
+
+ While we're at it, make sure that the version is set before read, to avoid
+ say returning true for "per_cu.version () < 5" if "per_cu.version () == 0".
+
+ Tested on x86_64-linux.
+
+2022-07-02 Tom de Vries <tdevries@suse.de>
+
+ [gdb/testsuite] Fix gdb.base/early-init-file.exp with -fsanitize=thread
+ When building gdb with -fsanitize=thread, I run into:
+ ...
+ FAIL: gdb.base/early-init-file.exp: check startup version string has style \
+ version
+ ...
+ due to this:
+ ...
+ warning: Found custom handler for signal 7 (Bus error) preinstalled.^M
+ warning: Found custom handler for signal 8 (Floating point exception) \
+ preinstalled.^M
+ warning: Found custom handler for signal 11 (Segmentation fault) \
+ preinstalled.^M
+ Some signal dispositions inherited from the environment (SIG_DFL/SIG_IGN)^M
+ won't be propagated to spawned programs.^M
+ ...
+ appearing before the "GNU gdb (GDB) $version" line.
+
+ This is similar to the problem fixed by commit f0bbba7886f
+ ("gdb.debuginfod/fetch_src_and_symbols.exp: fix when GDB is built with
+ AddressSanitizer").
+
+ In that commit, the problem was fixed by starting gdb with -quiet, but using
+ that would mean the "GNU gdb (GDB) $version" line that we're trying to check
+ would disappear.
+
+ Fix this instead by updating the regexp to allow the message.
+
+ Tested on x86_64-linux.
+
+2022-07-02 GDB Administrator <gdbadmin@sourceware.org>
+
+ Automatic date update in version.in
+
+2022-07-01 Maciej W. Rozycki <macro@embecosm.com>
+
+ GDB/doc: Remove indentation from `print -elements' completion example
+ Remove indentation from the text of the manual after the example here:
+
+ " Completion will in some cases guide you with a suggestion of what
+ kind of argument an option expects. For example:
+
+ (gdb) print -elements <TAB><TAB>
+ NUMBER unlimited
+
+ Here, the option expects a number (e.g., '100'), not literal
+ 'NUMBER'. Such metasyntactical arguments are always presented in
+ uppercase."
+
+ as this is a continuation of the same paragraph.
+
+2022-07-01 Maciej W. Rozycki <macro@embecosm.com>
+
+ GDB/doc: Remove extraneous spaces from completion examples
+ Completion results are usually different when the operation is applied
+ to a word that is or is not followed by a space. In some cases they are
+ equivalent, however a space would not be produced if completion was used
+ earlier on in the word processed.
+
+ However in the manual we have completion examples given using a space
+ that actually prevents the example from working. E.g.:
+
+ (gdb) info bre <TAB>
+
+ (nothing) and:
+
+ (gdb) info bre <TAB><TAB>
+ Display all 200 possibilities? (y or n)
+
+ as it now goes on to propose the entire symbol table, while:
+
+ (gdb) info bre<TAB>
+ (gdb) info breakpoints
+
+ does the right thing, but is not what is shown in the manual.
+
+ In other cases an extraneous space is used that does not correspond to
+ the actual completion pattern shown, which gives an impression of
+ sloppiness.
+
+ Remove extraneous spaces then from completion examples as appropriate.
+
+2022-07-01 Nick Clifton <nickc@redhat.com>
+
+ Add newline to the end of the rnglists displsy.
+
+2022-07-01 GDB Administrator <gdbadmin@sourceware.org>
+
+ Automatic date update in version.in
+
+2022-06-30 Maciej W. Rozycki <macro@embecosm.com>
+
+ GDB: Add `NUMBER' completion to `set' integer commands
+ Fix a completion consistency issue with `set' commands accepting integer
+ values and the special `unlimited' keyword:
+
+ (gdb) complete print -elements
+ print -elements NUMBER
+ print -elements unlimited
+ (gdb)
+
+ vs:
+
+ (gdb) complete set print elements
+ set print elements unlimited
+ (gdb)
+
+ (there is a space entered at the end of both commands, not shown here)
+ which also means if you strike <Tab> with `set print elements ' input,
+ it will, annoyingly, complete to `set print elements unlimited' right
+ away rather than showing a choice between `NUMBER' and `unlimited'.
+
+ Add `NUMBER' then as an available completion for such `set' commands:
+
+ (gdb) complete set print elements
+ set print elements NUMBER
+ set print elements unlimited
+ (gdb)
+
+ Adjust the testsuite accordingly. Also document the feature in the
+ Completion section of the manual in addition to the Command Options
+ section already there.
+
+2022-06-30 Bruno Larsen <blarsen@redhat.com>
+
+ gdb/testsuite: Expand gdb.cp/mb-ctor.exp to test dynamic allocation
+ When testing GDB's ability to stop in constructors, gdb.cp/mb-ctor.exp
+ only tested objects allocated on the stack. This commit adds a couple of
+ dynamic allocations and tests if GDB can stop in it as well.
+
+2022-06-30 Nick Clifton <nickc@redhat.com>
+
+ Fix implementation of readelf's -wE and -wN options,
+ * dwarf.c (dwarf_select_sections_by_name): If the entry's value is
+ zero then clear the corresponding variable.
+ (dwarf_select_sections_by_letters): Likewise.
+ * testsuite/binutils-all/debuginfo.exp: Expect -WE and -wE
+ debuginfod tests to fail.
+
+2022-06-30 Tom de Vries <tdevries@suse.de>
+
+ [gdb] Block SIGTERM in worker threads
+ With gdb build with gcc-12 and -fsanitize=thread, and test-case
+ gdb.base/gdb-sigterm.exp, I run into:
+ ...
+ WARNING: ThreadSanitizer: data race (pid=9722)^M
+ Write of size 4 at 0x00000325bc68 by thread T1:^M
+ #0 handle_sigterm(int) src/gdb/event-top.c:1211 (gdb+0x8ec01f)^M
+ ...
+ Previous read of size 4 at 0x00000325bc68 by main thread:^M
+ [failed to restore the stack]^M
+ ^M
+ Location is global 'sync_quit_force_run' of size 4 at \
+ 0x00000325bc68 (gdb+0x325bc68)^M
+ ...
+ SUMMARY: ThreadSanitizer: data race gdb/event-top.c:1211 in \
+ handle_sigterm(int)^M
+ ...
+ and 3 more data races involving handle_sigterm and locations:
+ - active_ext_lang
+ - quit_flag
+ - heap block of size 40
+ (XNEW (async_signal_handler) in create_async_signal_handler)
+
+ This was reported in PR29297.
+
+ The testcase executes a "kill -TERM $gdb_pid", which generates a
+ process-directed signal.
+
+ A process-directed signal can be delivered to any thread, and what we see
+ here is the fallout of the signal being delivered to a worker thread rather
+ than the main thread.
+
+ Fix this by blocking SIGTERM in the worker threads.
+
+ [ I have not been able to reproduce this after it occurred for the first time,
+ so unfortunately I cannot confirm that the patch fixes the problem. ]
+
+ Tested on x86_64-linux, with and without -fsanitize=thread.
+
+ Bug: https://sourceware.org/bugzilla/show_bug.cgi?id=29297
+
+2022-06-30 Andrew Burgess <aburgess@redhat.com>
+
+ gdb/doc: fix column widths in MI compatibility table
+ In passing I noticed that the column headings for the table of MI
+ compatibility and breaking changes, were overlapping, at least when
+ the PDF is generated on my machine.
+
+ I propose giving slightly more space to the two version number
+ columns, this prevents the headers overlapping for me.
+
+2022-06-30 GDB Administrator <gdbadmin@sourceware.org>
+
+ Automatic date update in version.in
+
+2022-06-29 Pedro Alves <pedro@palves.net>
+
+ Fix GDBserver regression due to change to avoid reading shell registers
+ Simon reported that the recent change to make GDB and GDBserver avoid
+ reading shell registers caused a GDBserver regression, caught with
+ ASan while running gdb.server/non-existing-program.exp:
+
+ $ /home/smarchi/build/binutils-gdb/gdb/testsuite/../../gdb/../gdbserver/gdbserver stdio non-existing-program
+ =================================================================
+ ==127719==ERROR: AddressSanitizer: heap-use-after-free on address 0x60f0000000e9 at pc 0x55bcbfa301f4 bp 0x7ffd238a7320 sp 0x7ffd238a7310
+ WRITE of size 1 at 0x60f0000000e9 thread T0
+ #0 0x55bcbfa301f3 in scoped_restore_tmpl<bool>::~scoped_restore_tmpl() /home/smarchi/src/binutils-gdb/gdbserver/../gdbsupport/scoped_restore.h:86
+ #1 0x55bcbfa2ffe9 in post_fork_inferior(int, char const*) /home/smarchi/src/binutils-gdb/gdbserver/fork-child.cc:120
+ #2 0x55bcbf9c9199 in linux_process_target::create_inferior(char const*, std::__debug::vector<char*, std::allocator<char*> > const&) /home/smarchi/src/binutils-gdb/gdbserver/linux-low.cc:991
+ #3 0x55bcbf954549 in captured_main /home/smarchi/src/binutils-gdb/gdbserver/server.cc:3941
+ #4 0x55bcbf9552f0 in main /home/smarchi/src/binutils-gdb/gdbserver/server.cc:4084
+ #5 0x7ff9d663b0b2 in __libc_start_main (/lib/x86_64-linux-gnu/libc.so.6+0x240b2)
+ #6 0x55bcbf8ef2bd in _start (/home/smarchi/build/binutils-gdb/gdbserver/gdbserver+0x1352bd)
+
+ 0x60f0000000e9 is located 169 bytes inside of 176-byte region [0x60f000000040,0x60f0000000f0)
+ freed by thread T0 here:
+ #0 0x7ff9d6c6f0c7 in operator delete(void*) ../../../../src/libsanitizer/asan/asan_new_delete.cpp:160
+ #1 0x55bcbf910d00 in remove_process(process_info*) /home/smarchi/src/binutils-gdb/gdbserver/inferiors.cc:164
+ #2 0x55bcbf9c4ac7 in linux_process_target::remove_linux_process(process_info*) /home/smarchi/src/binutils-gdb/gdbserver/linux-low.cc:454
+ #3 0x55bcbf9cdaa6 in linux_process_target::mourn(process_info*) /home/smarchi/src/binutils-gdb/gdbserver/linux-low.cc:1599
+ #4 0x55bcbf988dc4 in target_mourn_inferior(ptid_t) /home/smarchi/src/binutils-gdb/gdbserver/target.cc:205
+ #5 0x55bcbfa32020 in startup_inferior(process_stratum_target*, int, int, target_waitstatus*, ptid_t*) /home/smarchi/src/binutils-gdb/gdbserver/../gdb/nat/fork-inferior.c:515
+ #6 0x55bcbfa2fdeb in post_fork_inferior(int, char const*) /home/smarchi/src/binutils-gdb/gdbserver/fork-child.cc:111
+ #7 0x55bcbf9c9199 in linux_process_target::create_inferior(char const*, std::__debug::vector<char*, std::allocator<char*> > const&) /home/smarchi/src/binutils-gdb/gdbserver/linux-low.cc:991
+ #8 0x55bcbf954549 in captured_main /home/smarchi/src/binutils-gdb/gdbserver/server.cc:3941
+ #9 0x55bcbf9552f0 in main /home/smarchi/src/binutils-gdb/gdbserver/server.cc:4084
+ #10 0x7ff9d663b0b2 in __libc_start_main (/lib/x86_64-linux-gnu/libc.so.6+0x240b2)
+
+ previously allocated by thread T0 here:
+ #0 0x7ff9d6c6e5a7 in operator new(unsigned long) ../../../../src/libsanitizer/asan/asan_new_delete.cpp:99
+ #1 0x55bcbf910ad0 in add_process(int, int) /home/smarchi/src/binutils-gdb/gdbserver/inferiors.cc:144
+ #2 0x55bcbf9c477d in linux_process_target::add_linux_process_no_mem_file(int, int) /home/smarchi/src/binutils-gdb/gdbserver/linux-low.cc:425
+ #3 0x55bcbf9c8f4c in linux_process_target::create_inferior(char const*, std::__debug::vector<char*, std::allocator<char*> > const&) /home/smarchi/src/binutils-gdb/gdbserver/linux-low.cc:985
+ #4 0x55bcbf954549 in captured_main /home/smarchi/src/binutils-gdb/gdbserver/server.cc:3941
+ #5 0x55bcbf9552f0 in main /home/smarchi/src/binutils-gdb/gdbserver/server.cc:4084
+ #6 0x7ff9d663b0b2 in __libc_start_main (/lib/x86_64-linux-gnu/libc.so.6+0x240b2)
+
+ Above we see that in the non-existing-program case, the process gets
+ deleted before the starting_up flag gets restored to false.
+
+ This happens because startup_inferior calls target_mourn_inferior
+ before throwing an error, and in GDBserver, unlike in GDB, mourning
+ deletes the process.
+
+ Fix this by not using a scoped_restore to manage the starting_up flag,
+ since we should only clear it when startup_inferior doesn't throw.
+
+ Change-Id: I67325d6f81c64de4e89e20e4ec4556f57eac7f6c
+
+2022-06-29 Maciej W. Rozycki <macro@embecosm.com>
+
+ GDB/testsuite: Tighten `set print elements' error check
+ Match the whole error message expected to be given rather than omitting
+ the part about the "unlimited" keyword. There's no point in omitting
+ the missing part first, and second with an upcoming change the part in
+ parentheses will no longer be a fixed string, so doing a full match will
+ ensure the algorithm correctly builds the message expected here. Also
+ avoid any wildcard matches.
+
+2022-06-29 Maciej W. Rozycki <macro@embecosm.com>
+
+ GDB: Remove extraneous full stops from `set' command error messages
+ With errors given for bad commands such as `set annotate' or `set width'
+ we produce an extraneous full stop within parentheses:
+
+ (gdb) set annotate
+ Argument required (integer to set it to.).
+ (gdb) set width
+ Argument required (integer to set it to, or "unlimited".).
+ (gdb)
+
+ This is grammatically incorrect, so remove the full stop and adjust the
+ testsuite accordingly.
+
+2022-06-29 Andrew Burgess <aburgess@redhat.com>
+
+ gdb/doc: improve description of --data-disassemble opcodes output
+ Extend the description of the MI command --data-disassemble.
+ Specifically, expand the description of the 'opcodes' field to explain
+ how the bytes are formatted.
+
+2022-06-29 Yvan Roux <yvan.roux@foss.st.com>
+
+ gdb/arm: Only stack S16..S31 when FPU registers are secure
+ The FPCCR.TS bit is used to identify if FPU registers are considered
+ non-secure or secure. If they are secure, then callee saved registers
+ (S16 to S31) are stacked on exception entry or otherwise skipped.
+
+2022-06-29 Andrew Burgess <aburgess@redhat.com>
+
+ opcodes/aarch64: split off creation of comment text in disassembler
+ The function aarch64_print_operand (aarch64-opc.c) is responsible for
+ converting an instruction operand into the textual representation of
+ that operand.
+
+ In some cases, a comment is included in the operand representation,
+ though this (currently) only happens for the last operand of the
+ instruction.
+
+ In a future commit I would like to enable the new libopcodes styling
+ for AArch64, this will allow objdump and GDB[1] to syntax highlight
+ the disassembler output, however, having operands and comments
+ combined in a single string like this makes such styling harder.
+
+ In this commit, I propose to extend aarch64_print_operand to take a
+ second buffer. Any comments for the instruction are written into this
+ extra buffer. The two callers of aarch64_print_operand are then
+ updated to pass an extra buffer, and print any resulting comment.
+
+ In this commit no styling is added, that will come later. However, I
+ have adjusted the output slightly. Before this commit some comments
+ would be separated from the instruction operands with a tab character,
+ while in other cases the comment was separated with two single spaces.
+
+ After this commit I use a single tab character in all cases. This
+ means a few test cases needed updated. If people would prefer me to
+ move everyone to use the two spaces, then just let me know. Or maybe
+ there was a good reason why we used a mix of styles, I could probably
+ figure out a way to maintain the old output exactly if that is
+ critical.
+
+ Other than that, there should be no user visible changes after this
+ commit.
+
+ [1] GDB patches have not been merged yet, but have been posted to the
+ GDB mailing list:
+ https://sourceware.org/pipermail/gdb-patches/2022-June/190142.html
+
+2022-06-29 Carl Love <cel@us.ibm.com>
+ Andrew Burgess <aburgess@redhat.com>
+
+ gdb/testsuite: fix gdb.base/break-idempotent.exp on ppc
+ When running the gdb.base/break-idempotent.exp test on ppc, I was
+ seeing some test failures (or rather errors), that looked like this:
+
+ (gdb) watch local
+ Hardware watchpoint 2: local
+
+ has_hw_wp_support: Hardware watchpoint detected
+ ERROR: no fileid for gcc2-power8
+ ERROR: Couldn't send delete breakpoints to GDB.
+ ERROR OCCURED: can't read "gdb_spawn_id": no such variable
+ while executing
+ "expect {
+ -i 1000 -timeout 100
+ -re ".*A problem internal to GDB has been detected" {
+ fail "$message (GDB internal error)"
+ gdb_internal_erro..."
+ ("uplevel" body line 1)
+ invoked from within
+
+ What happens is that in break-idempotent.exp we basically do this:
+
+ if {[prepare_for_testing "failed to prepare" $binfile $srcfile $opts]} {
+ continue
+ }
+
+ # ....
+
+ if {![skip_hw_watchpoint_tests]} {
+ test_break $always_inserted "watch"
+ }
+
+ The problem with this is that skip_hw_watchpoint_tests, includes this:
+
+ if { [istarget "i?86-*-*"]
+ || [istarget "x86_64-*-*"]
+ || [istarget "ia64-*-*"]
+ || [istarget "arm*-*-*"]
+ || [istarget "aarch64*-*-*"]
+ || ([istarget "powerpc*-*-linux*"] && [has_hw_wp_support])
+ || [istarget "s390*-*-*"] } {
+ return 0
+ }
+
+ For powerpc only we call has_hw_wp_support. This is a caching proc
+ that runs a test within GDB to detect if we have hardware watchpoint
+ support or not.
+
+ Unfortunately, to run this test we restart GDB, and when the test has
+ completed, we exit GDB. This means that in break-idempotent.exp, when
+ we call skip_hw_watchpoint_tests for the first time on powerpc, GDB
+ will unexpectedly be exited. When we later call delete_breakpoints we
+ see the errors I reported above.
+
+ The fix is to call skip_hw_watchpoint_tests early, before we start GDB
+ as part of the break-idempotent.exp script, and store the result in a
+ variable, we can then check this variable in the script as needed.
+
+ After this change break-idempotent.exp runs fine on powerpc.
+
+2022-06-29 Jan Beulich <jbeulich@suse.com>
+
+ x86: drop stray NoRex64 from XBEGIN
+ Presumably this being there was a result of taking CALL as a reference
+ when adding the RTM insns. But with No_qSuf the attribute has no effect.
+
+2022-06-29 Vladimir Mezentsev <vladimir.mezentsev@oracle.com>
+
+ gprofng: fix build when BUILD_MAN is false
+ gprofng/ChangeLog
+ 2022-06-28 Vladimir Mezentsev <vladimir.mezentsev@oracle.com>
+
+ PR gprofng/29131
+ * gp-display-html/Makefile.am: Set man_MANS only when BUILD_MAN is true.
+ * src/Makefile.am: Likewise.
+ * gp-display-html/Makefile.in: Rebuild.
+ * src/Makefile.in: Rebuild.
+
+2022-06-29 Vladimir Mezentsev <vladimir.mezentsev@oracle.com>
+
+ gprofng: use $(sysconfdir) instead $(prefix)/etc
+ gprofng/ChangeLog
+ 2022-06-28 Vladimir Mezentsev <vladimir.mezentsev@oracle.com>
+
+ PR gprofng/29191
+ * src/Makefile.am: Use $(sysconfdir) instead $(prefix)/etc.
+ * src/Settings.cc: Likewise.
+ * src/Makefile.in: Rebuild.
+
+2022-06-29 Alan Modra <amodra@gmail.com>
+
+ Re: ld/x86: skip p_align-1 tests with unsuitable compiler
+ commit d0e0f9c87a3e results "ERROR: i586-linux-cc does not exist" if
+ cross-building an i586-linux target without a target compiler
+ installed.
+
+ * testsuite/ld-elf/linux-x86.exp (compiler_honours_aligned): New.
+ Use it after first testing check_compiler_available.
+
+2022-06-29 GDB Administrator <gdbadmin@sourceware.org>
+
+ Automatic date update in version.in
+
+2022-06-28 Pedro Alves <pedro@palves.net>
+
+ gdb+gdbserver/Linux: avoid reading registers while going through shell
+ For every stop, Linux GDB and GDBserver save the stopped thread's PC,
+ in lwp->stop_pc. This is done in save_stop_reason, in both
+ gdb/linux-nat.c and gdbserver/linux-low.cc. However, while we're
+ going through the shell after "run", in startup_inferior, we shouldn't
+ be reading registers, as we haven't yet determined the target's
+ architecture -- the shell's architecture may not even be the same as
+ the final inferior's.
+
+ In gdb/linux-nat.c, lwp->stop_pc is only needed when the thread has
+ stopped for a breakpoint, and since when going through the shell, no
+ breakpoint is going to hit, we could simply teach save_stop_reason to
+ only record the stop pc when the thread stopped for a breakpoint.
+
+ However, in gdbserver/linux-low.cc, lwp->stop_pc is used in more cases
+ than breakpoint hits (e.g., it's used in tracepoints & the
+ "while-stepping" feature).
+
+ So to avoid GDB vs GDBserver divergence, we apply the same approach to
+ both implementations.
+
+ We set a flag in the inferior (process in GDBserver) whenever it is
+ being nursed through the shell, and when that flag is set,
+ save_stop_reason bails out early. While going through the shell,
+ we'll only ever get process exits (normal or signalled), random
+ signals, and exec events, so nothing is lost.
+
+ Change-Id: If0f01831514d3a74d17efd102875de7d2c6401ad
+
+2022-06-28 Tom de Vries <tdevries@suse.de>
+
+ [gdb/build] Fix gdb build with -fsanitize=thread and gcc 7
+ When building gdb with system gcc 7.5.0, I run into:
+ ...
+ gdb/ia64-tdep.c: In function ‘int is_float_or_hfa_type_recurse(type*, type**)’:
+ gdb/ia64-tdep.c:3362:1: error: control reaches end of non-void function \
+ [-Werror=return-type]
+ ...
+
+ This is due to PR gcc/81275 - "-fsanitize=thread produce incorrect
+ -Wreturn-type warning", which has been fixed in gcc-8.
+
+ Work around this by moving the default return outside the switch.
+
+ Tested on x86_64-linux.
+
+2022-06-28 Clément Chigot <chigot@adacore.com>
+
+ bfd: handle codepage when opening files on MinGW
+ Even if MS docs say that CP_UTF8 should always be used on newer
+ applications, forcing it might produce undefined filename if the
+ encoding isn't UTF-8.
+ MinGW seems to call ___lc_codepage_func() in order to retrieve the
+ current thread codepage.
+
+ bfd/ChangeLog:
+
+ * bfdio.c (_bfd_real_fopen): Retrieve codepage with
+ ___lc_codepage_func() on MinGW.
+
+2022-06-28 Clément Chigot <chigot@adacore.com>
+
+ windres: add quotes around preprocessor cmd if needed
+ This patch ensures that the gcc binary called by windres is quoted if
+ needed. Otherwise, errors can occur if the gcc is under a folder having
+ a name containing a space (eg "Program Files").
+
+ binutils/
+ * resrc.c (DEFAULT_PREPROCESSOR): Split into...
+ (DEFAULT_PREPROCESSOR_CMD): that...
+ (DEFAULT_PREPROCESSOR_ARGS): and that.
+ (look_for_default): Add quotes around the command if needed.
+ (read_rc_file): Adapt to new defines.
+
+2022-06-28 Nick Clifton <nickc@redhat.com>
+
+ Fix the display of the idnex values for DW_FORM_loclistx and DW_FORM_rnglistx. Correct the display of .debug.loclists sections.
+ PR 29267
+ * dwarf.c (display_debug_rnglists): New function, broken out of..
+ (display_debug_ranges): ... here.
+ (read_and_display_attr_value): Correct calculation of index
+ displayed for DW_FORM_loclistx and DW_FORM_rnglistx.
+ * testsuite/binutils-all/x86-64/pr26808.dump: Update expected
+ output.
+
+2022-06-28 Jan Beulich <jbeulich@suse.com>
+
+ ld/x86: skip p_align-1 tests with unsuitable compiler
+ When the compiler doesn't properly arrange for foo's alignment, there's
+ no point even trying these tests. Report the situation as a single
+ "unsupported" test.
+
+2022-06-28 Alan Modra <amodra@gmail.com>
+
+ PowerPC64: align plt_branch stubs
+ plt_branch stubs are similar to plt_call stubs in that they branch
+ via bctr. Align them too.
+
+ bfd/
+ * elf64-ppc.c (ppc_size_one_stub): Align plt_branch stubs as for
+ plt_call stubs.
+ ld/
+ * testsuite/ld-powerpc/elfv2exe.d: Adjust for plt_branch changes.
+ * testsuite/ld-powerpc/notoc.d: Likewise.
+ * testsuite/ld-powerpc/notoc.wf: Likewise.
+ * testsuite/ld-powerpc/notoc3.d: Likewise.
+ * testsuite/ld-powerpc/pr23937.d: Likewise.
+
+2022-06-28 Alan Modra <amodra@gmail.com>
+
+ PowerPC64: plt_stub_pad
+ * elf64-ppc.c (plt_stub_pad): Simplify parameters and untangle
+ from plt_stub_size.
+ (ppc_size_one_stub): Call plt_stub_size before plt_stub_pad to
+ provide size. Recalculate size if it might change.
+
+2022-06-28 Alan Modra <amodra@gmail.com>
+
+ PowerPC64: Tidy stub type changes
+ It made sense before I started using separate fields for main type and
+ sub type to add a difference in main type to the type (thus keeping
+ sub type unchanged). Not so much now.
+
+ * elf64-ppc.c (ppc_merge_stub): Simplify stub type change.
+ (ppc_size_one_stub): Likewise.
+
+2022-06-28 Jiangshuai Li <jiangshuai_li@c-sky.com>
+
+ gdb:csky add pseudo regs for float and vector regs
+ In the existing CSKY architecture, there are at most 32 floating
+ and 16 vector registers. Float registers's count can be configured
+ as 16 or 32. In the future, the vector registers's count may be
+ extended to 32.
+
+ The bit width of floating-point register is 64bits, and the bit
+ width of vector register is 128bit.
+
+ Special points: in fr0~fr15 and vr0~vr15, each FRx is the lower
+ 64 bits of the corresponding VRx.
+
+ Here, we will split each floating-point and vector register to
+ 32bits wide, add the corresponding pseudo registers, and finally
+ use them for the dwarf registers.
+
+ There are 128 pseudo registers in total, s0~s127, including:
+ 1. s0 and s1 correspond to fr0, s4 and s5 correspond to fr1, and so on.
+ Every two separated pseudo registers correspond to a float register.
+ 2. s0, s1, s2 and s3 correspond to vr0; s4, s5, s6 and s7 correspond to vr1,
+ and so on. Every four pseudo registers corresponds to a vector register.
+
+ Therefore, in s64~s127, there are general registers that are not actually
+ used. This part is to prepare for the expansion of vector registers to 32
+
+ Therefore, in s64~s127, half of the registers are actually unused. This
+ part is to prepare for the expansion of the vector register to 32.
+
+2022-06-28 Pekka Seppänen <pexu@sourceware.mail.kapsi.fi>
+
+ PR29293, elfnn-aarch64.c: def_protected member unintialized
+ PR 29293
+ * elfnn-aarch64.c (elfNN_aarch64_link_hash_newfunc): Init def_protected.
+
+2022-06-28 Tsukasa OI <research_trasio@irq.a4lg.com>
+
+ RISC-V: Add 'Sstc' extension and its CSRs
+ This commit adds "stimecmp / vstimecmp" Extension (Sstc) and its CSRs.
+
+ bfd/ChangeLog:
+
+ * elfxx-riscv.c (riscv_supported_std_s_ext): Add 'Sstc'
+ extension to valid 'S' extension list.
+
+ gas/ChangeLog:
+
+ * config/tc-riscv.c (enum riscv_csr_class): Add CSR classes for
+ 'Sstc' extension. (riscv_csr_address): Add handling for new CSR
+ classes.
+ * testsuite/gas/riscv/csr-dw-regnums.s: Add new CSRs.
+ * testsuite/gas/riscv/csr-dw-regnums.d: Likewise.
+ * testsuite/gas/riscv/csr.s: Add new CSRs.
+ * testsuite/gas/riscv/csr-version-1p9p1.d: Likewise.
+ * testsuite/gas/riscv/csr-version-1p9p1.l: Likewise.
+ * testsuite/gas/riscv/csr-version-1p10.d: Likewise.
+ * testsuite/gas/riscv/csr-version-1p10.l: Likewise.
+ * testsuite/gas/riscv/csr-version-1p11.d: Likewise.
+ * testsuite/gas/riscv/csr-version-1p11.l: Likewise.
+ * testsuite/gas/riscv/csr-version-1p12.d: Likewise.
+ * testsuite/gas/riscv/csr-version-1p12.l: Likewise.
+
+ include/ChangeLog:
+
+ * opcode/riscv-opc.h (CSR_STIMECMP, CSR_STIMECMPH,
+ CSR_VSTIMECMP, CSR_VSTIMECMPH): New CSR macros.
+
+2022-06-28 Tsukasa OI <research_trasio@irq.a4lg.com>
+
+ RISC-V: Add 'Sscofpmf' extension with its CSRs
+ This commit adds Count Overflow and Mode-Based Filtering Extension
+ (Sscofpmf) and its CSRs.
+
+ bfd/ChangeLog:
+
+ * elfxx-riscv.c (riscv_supported_std_s_ext): Add 'Sscofpmf'
+ extension to valid 'S' extension list.
+
+ gas/ChangeLog:
+
+ * config/tc-riscv.c (enum riscv_csr_class): Add CSR classes for
+ 'Sscofpmf' extension. (riscv_csr_address): Add handling for new
+ CSR classes.
+ * testsuite/gas/riscv/csr-dw-regnums.s: Add new CSRs.
+ * testsuite/gas/riscv/csr-dw-regnums.d: Likewise.
+ * testsuite/gas/riscv/csr.s: Add new CSRs.
+ * testsuite/gas/riscv/csr-version-1p9p1.d: Likewise.
+ * testsuite/gas/riscv/csr-version-1p9p1.l: Likewise.
+ * testsuite/gas/riscv/csr-version-1p10.d: Likewise.
+ * testsuite/gas/riscv/csr-version-1p10.l: Likewise.
+ * testsuite/gas/riscv/csr-version-1p11.d: Likewise.
+ * testsuite/gas/riscv/csr-version-1p11.l: Likewise.
+ * testsuite/gas/riscv/csr-version-1p12.d: Likewise.
+ * testsuite/gas/riscv/csr-version-1p12.l: Likewise.
+
+ include/ChangeLog:
+
+ * opcode/riscv-opc.h (CSR_SCOUNTOVF, CSR_MHPMEVENT3H,
+ CSR_MHPMEVENT4H, CSR_MHPMEVENT5H, CSR_MHPMEVENT6H,
+ CSR_MHPMEVENT7H, CSR_MHPMEVENT8H, CSR_MHPMEVENT9H,
+ CSR_MHPMEVENT10H, CSR_MHPMEVENT11H, CSR_MHPMEVENT12H,
+ CSR_MHPMEVENT13H, CSR_MHPMEVENT14H, CSR_MHPMEVENT15H,
+ CSR_MHPMEVENT16H, CSR_MHPMEVENT17H, CSR_MHPMEVENT18H,
+ CSR_MHPMEVENT19H, CSR_MHPMEVENT20H, CSR_MHPMEVENT21H,
+ CSR_MHPMEVENT22H, CSR_MHPMEVENT23H, CSR_MHPMEVENT24H,
+ CSR_MHPMEVENT25H, CSR_MHPMEVENT26H, CSR_MHPMEVENT27H,
+ CSR_MHPMEVENT28H, CSR_MHPMEVENT29H, CSR_MHPMEVENT30H,
+ CSR_MHPMEVENT31H): New CSR macros.
+
+2022-06-28 Tsukasa OI <research_trasio@irq.a4lg.com>
+
+ RISC-V: Add 'Smstateen' extension and its CSRs
+ This commit adds State Enable Extension (Smstateen) and its CSRs.
+
+ bfd/ChangeLog:
+
+ * elfxx-riscv.c (riscv_supported_std_s_ext): Add 'Smstateen'
+ extension to valid 'S' extension list.
+
+ gas/ChangeLog:
+
+ * config/tc-riscv.c (enum riscv_csr_class): Add CSR classes for
+ 'Smstateen' extension. (riscv_csr_address): Add handling for
+ new CSR classes.
+ * testsuite/gas/riscv/csr-dw-regnums.s: Add new CSRs.
+ * testsuite/gas/riscv/csr-dw-regnums.d: Likewise.
+ * testsuite/gas/riscv/csr.s: Add new CSRs.
+ * testsuite/gas/riscv/csr-version-1p9p1.d: Likewise.
+ * testsuite/gas/riscv/csr-version-1p9p1.l: Likewise.
+ * testsuite/gas/riscv/csr-version-1p10.d: Likewise.
+ * testsuite/gas/riscv/csr-version-1p10.l: Likewise.
+ * testsuite/gas/riscv/csr-version-1p11.d: Likewise.
+ * testsuite/gas/riscv/csr-version-1p11.l: Likewise.
+ * testsuite/gas/riscv/csr-version-1p12.d: Likewise.
+ * testsuite/gas/riscv/csr-version-1p12.l: Likewise.
+
+ include/ChangeLog:
+
+ * opcode/riscv-opc.h (CSR_MSTATEEN0, CSR_MSTATEEN1,
+ CSR_MSTATEEN2, CSR_MSTATEEN3, CSR_SSTATEEN0, CSR_SSTATEEN1,
+ CSR_SSTATEEN2, CSR_SSTATEEN3, CSR_HSTATEEN0, CSR_HSTATEEN1,
+ CSR_HSTATEEN2, CSR_HSTATEEN3, CSR_MSTATEEN0H, CSR_MSTATEEN1H,
+ CSR_MSTATEEN2H, CSR_MSTATEEN3H, CSR_HSTATEEN0H, CSR_HSTATEEN1H,
+ CSR_HSTATEEN2H, CSR_HSTATEEN3H): New CSR macros.
+
+2022-06-28 Tsukasa OI <research_trasio@irq.a4lg.com>
+
+ RISC-V: Add new CSR feature gate handling (RV32,H)
+ To support feature gate like Smstateen && H, this commit adds certain
+ CSR feature gate handling. It also changes how RV32-only CSRs are
+ handled for cleanliness.
+
+ gas/ChangeLog:
+
+ * config/tc-riscv.c (riscv_csr_address): Add CSR feature gate
+ handling for H. Change handling on RV32.
+
+2022-06-28 Alan Modra <amodra@gmail.com>
+
+ Re: Disable execstack and rwx segments warnings for MIPS targets.
+ PR 29263
+ * configure.ac: Fix typo.
+ * testsuite/ld-elf/elf.exp: Add mips to targets that need
+ --warn-execstack to pass first pr29072 test.
+
+2022-06-28 GDB Administrator <gdbadmin@sourceware.org>
+
+ Automatic date update in version.in
+
+2022-06-27 Bruno Larsen <blarsen@redhat.com>
+
+ gdb/testsuite: update bug numbers from Gnats to bugzilla
+ Some tests link to outdated bug numbers when an XFAIL or a KFAIL happen.
+
+ gdb.base/macscp.exp was referencing bug number 555, and the bug 7660
+ mentions that it used to be 555 on the Gnats system and seems to relate
+ to the issue at hand.
+
+ gdb.base/annota1.exp was referencing bug number 1270, and bug 8375
+ mentions being number 1270 on Gnats, and mentions annota1 specifically,
+ so it seemed pretty obvious.
+
+2022-06-27 Tom de Vries <tdevries@suse.de>
+
+ [gdb/build] Fix build breaker with --enable-shared
+ When building gdb with --enable-shared, I run into:
+ ...
+ ld: build/zlib/libz.a(libz_a-inffast.o): relocation R_X86_64_32S against \
+ `.rodata' can not be used when making a shared object; recompile with -fPIC
+ ld: build/zlib/libz.a(libz_a-inflate.o): warning: relocation against \
+ `inflateResetKeep' in read-only section `.text'
+ collect2: error: ld returned 1 exit status
+ make[3]: *** [libbfd.la] Error 1
+ ...
+
+ This is a regression since commit a08bdb159bb ("[gdb/build] Fix gdbserver
+ build with -fsanitize=thread").
+
+ The problem is that a single case statement in configure is shared to handle
+ special requirements for both the host libiberty and host zlib, which has the
+ effect that only one is handled.
+
+ Fix this by handling libiberty and zlib each in its own case statement.
+
+ Build on x86_64-linux, with and without --enable-shared.
+
+ ChangeLog:
+
+ 2022-06-27 Tom de Vries <tdevries@suse.de>
+
+ * configure.ac: Set extra_host_libiberty_configure_flags and
+ extra_host_zlib_configure_flags in separate case statements.
+ * configure: Regenerate.
+
+2022-06-27 Pedro Alves <pedro@palves.net>
+
+ Make GDBserver abort on internal error in development mode
+ Currently, if GDBserver hits some internal assertion, it exits with
+ error status, instead of aborting. This makes it harder to debug
+ GDBserver, as you can't just debug a core file if GDBserver fails an
+ assertion. I've had to hack the code to make GDBserver abort to debug
+ something several times before.
+
+ I believe the reason it exits instead of aborting, is to prevent
+ potentially littering the filesystem of smaller embedded targets with
+ core files. I think I recall Daniel Jacobowitz once saying that many
+ years ago, but I can't be sure. Anyhow, that seems reasonable to me.
+
+ Since we nowadays have a distinction between development and release
+ modes, I propose to make GDBserver abort on internal error if in
+ development mode, while keeping the status quo when in release mode.
+
+ Thus, after this patch, in development mode, you get:
+
+ $ ../gdbserver/gdbserver
+ ../../src/gdbserver/server.cc:3711: A problem internal to GDBserver has been detected.
+ captured_main: Assertion `0' failed.
+ Aborted (core dumped)
+ $
+
+ while in release mode, you'll continue to get:
+
+ $ ../gdbserver/gdbserver
+ ../../src/gdbserver/server.cc:3711: A problem internal to GDBserver has been detected.
+ captured_main: Assertion `0' failed.
+ $ echo $?
+ 1
+
+ I do not think that this requires a separate configure switch.
+
+ A "--target_board=native-extended-gdbserver" run on Ubuntu 20.04 ends
+ up with:
+
+ === gdb Summary ===
+
+ # of unexpected core files 29
+ ...
+
+ for me, of which 8 are GDBserver core dumps, 7 more than without this
+ patch.
+
+ Change-Id: I6861e08ad71f65a0332c91ec95ca001d130b0e9d
+
+2022-06-27 Nick Clifton <nickc@redhat.com>
+
+ Replace a run-time assertion failure with a warning message when parsing corrupt DWARF data.
+ PR 29289
+ * dwarf.c (display_debug_names): Replace assert with a warning
+ message.
+
+ Fix NULL pointer indirection when parsing corrupt DWARF data.
+ PR 29290
+ * dwarf.c (read_and_display_attr_value): Check that debug_info_p
+ is set before dereferencing it.
+
+ Have gold's File_read::do_read() function check the start parameter
+ PR 23765
+ * fileread.cc (File_read::do_read): Check start parameter before
+ computing number of bytes to read.
+
+2022-06-27 Yvan Roux <yvan.roux@foss.st.com>
+
+ gdb/arm: Unwind Non-Secure callbacks from Secure
+ Without this changeset, the unwinding doesn't take into account
+ Non-Secure to Secure stack unwinding enablement status and
+ doesn't choose the proper SP to do the unwinding.
+
+ This patch only unwinds the stack when Non-Secure to Secure
+ unwinding is enabled, previous SP is set w/r to the current mode
+ (Handler -> msp_s, Thread -> psp_s) and then the Secure stack is
+ unwound. Ensure thumb bit is set in PSR when needed. Also, drop
+ thumb bit from PC if set.
+
+2022-06-27 Nick Clifton <nickc@redhat.com>
+
+ Stop bogus warnings about DWARF indexed string offsets being too big.
+ * dwarf.c (fetch_indexed_string): Do not use length of first table
+ in string section as the length of every table in the section.
+ * testsuite/binutils-all/pr26112.r: Update expected output.
+
+2022-06-27 Tom de Vries <tdevries@suse.de>
+
+ [gdb/testsuite] Handle older python in gdb.python/py-send-packet.py
+ With python 3.4, I run into:
+ ...
+ Traceback (most recent call last):^M
+ File "<string>", line 1, in <module>^M
+ File
+ "outputs/gdb.python/py-send-packet/py-send-packet.py", line 128, in \
+ run_set_global_var_test^M
+ res = conn.send_packet(b"X%x,4:\x02\x02\x02\x02" % addr)^M
+ TypeError: Could not convert Python object: b'X%x,4:\x02\x02\x02\x02'.^M
+ Error while executing Python code.^M
+ ...
+ while with python 3.6 this works fine.
+
+ The type of addr is <class 'gdb.Value'>, so the first thing to try is whether
+ changing it into a string works:
+ ...
+ addr_str = "%x" % addr
+ res = conn.send_packet(b"X%s,4:\x02\x02\x02\x02" % addr_str)
+ ...
+ which gets us the more detailed:
+ ...
+ TypeError: unsupported operand type(s) for %: 'bytes' and 'str'
+ ...
+
+ Fix this by avoiding the '%' operator in the byte literal, and use instead:
+ ...
+ def xpacket_header (addr):
+ return ("X%x,4:" % addr).encode('ascii')
+ ...
+ res = conn.send_packet(xpacket_header(addr) + b"\x02\x02\x02\x02")
+ ...
+
+ Tested on x86_64-linux, with python 3.4 and 3.6, and a backported version was
+ tested on the gdb-12-branch in combination with python 2.7.
+
+2022-06-27 Tom de Vries <tdevries@suse.de>
+
+ [gdb/testsuite] Fix gdb.reverse/i387-env-reverse.exp for -pie
+ When running test-case gdb.reverse/i387-env-reverse.exp for x86_64-linux with
+ target board unix/-m32/-fPIE/-pie, we run into:
+ ...
+ (gdb) PASS: gdb.reverse/i387-env-reverse.exp: push st0
+ info register eax^M
+ eax 0x56550000 1448411136^M
+ (gdb) FAIL: gdb.reverse/i387-env-reverse.exp: verify eax == 0x8040000
+ ...
+
+ The problem is that the tested instruction (fstsw) only sets $ax, not $eax.
+
+ Fix this by verifying $ax instead of $eax.
+
+ Tested on x86_64-linux with target boards unix/-m32 and unix/-m32/-fPIE/-pie.
+
+2022-06-27 Tom de Vries <tdevries@suse.de>
+
+ [gdb/testsuite] Enable some test-cases for x86_64 -m32
+ When trying to run test-case gdb.reverse/i387-env-reverse.exp for x86_64-linux
+ with target board unix/-m32, it's skipped.
+
+ Fix this by using is_x86_like_target instead of istarget "i?86-*linux*".
+
+ This exposes a number of duplicates, fix those by making the test names unique.
+
+ Likewise in a couple of other test-cases.
+
+ Tested on x86_64-linux with target boards unix/-m32.
+
+2022-06-27 Tom de Vries <tdevries@suse.de>
+
+ [gdb/testsuite] Workaround unnecessary .s file with gfortran 4.8
+ After running test-case gdb.fortran/namelist.exp with gfortran 4.8.5, I'm left
+ with:
+ ...
+ $ git sti
+ On branch master
+ Your branch is up to date with 'origin/master'.
+
+ Untracked files:
+ (use "git add <file>..." to include in what will be committed)
+ gdb/testsuite/lib/compiler.s
+
+ nothing added to commit but untracked files present (use "git add" to track)
+ ...
+
+ We're running into PR gcc/60447, which was fixed in gcc 4.9.0.
+
+ Workaround this by first copying the source file to the temp dir, such that
+ the .s file is left there instead:
+ ...
+ $ ls build/gdb/testsuite/temp/<runtest pid>/
+ compiler.c compiler.F90 compiler.s
+ ...
+
+ Tested on x86_64-linux.
+
+2022-06-27 Tom de Vries <tdevries@suse.de>
+
+ [gdb/testsuite] Skip gdb.fortran/namelist.exp for gfortran 4.8
+ The test-case gdb.fortran/namelist.exp uses a gfortran feature (emitting
+ DW_TAG_namelist in the debug info) that has been supported since gfortran 4.9,
+ see PR gcc/37132.
+
+ Skip the test for gfortran 4.8 and earlier. Do this using gcc_major_version,
+ and update it to be able to handle "gcc_major_version {gfortran-*} f90".
+
+ Tested on x86_64-linux, with gfortran 4.8.5, 7.5.0, and 12.1.1.
+
+2022-06-27 Tom de Vries <tdevries@suse.de>
+
+ [gdb/symtab] Fix parsing of .debug_str_offsets header
+ When running test-case gdb.dwarf2/fission-mix.exp with target board dwarf64
+ and gcc-12 (defaulting to DWARF5), I run into:
+ ...
+ (gdb) break func2^M
+ Offset from DW_FORM_GNU_str_index or DW_FORM_strx pointing outside of \
+ .debug_str.dwo section in CU at offset 0x0 [in module fission-mix]^M
+ (gdb) FAIL: gdb.dwarf2/fission-mix.exp: break func2
+ ...
+
+ The .debug_str_offsets section has version 5, so as per the standard it has
+ it's own header, with initial length and version:
+ ...
+ Contents of the .debug_str_offsets.dwo section (loaded from fission-mix2.dwo):
+
+ Length: 0x1c
+ Version: 0x5
+ Index Offset [String]
+ 0 0 build/gdb/testsuite
+ 1 33 GNU C17
+ 2 8f src/gdb/testsuite/gdb.dwarf2/fission-mix-2.c
+ ...
+
+ But when trying to read the string offset at index 0 in the table (which
+ is 0), we start reading at offset 8, which points in the header, at the last
+ 4 bytes of the initial length (it's 12 bytes because of 64-bit dwarf), as well
+ at the 2-byte version field and 2 bytes of padding, so we get:
+ ...
+ (gdb) p /x str_offset
+ $1 = 0x500000000
+ ...
+ which indeed is an offset that doesn't fit in the .debug_str section.
+
+ The offset 8 is based on reader->cu->header.addr_size:
+ ...
+ static const char *
+ read_dwo_str_index (const struct die_reader_specs *reader, ULONGEST str_index)
+ {
+ ULONGEST str_offsets_base = reader->cu->header.version >= 5
+ ? reader->cu->header.addr_size : 0;
+ ...
+ which doesn't in look in agreement with the standard.
+
+ Note that this happens to give the right answer for 32-bit dwarf and
+ addr_size == 8, because then we have header size ==
+ (initial length (4) + version (2) + padding (2)) == 8.
+
+ Conversely, for 32-bit dwarf and addr_size == 4 (target board unix/-m32)
+ we run into a similar problem. It just happens to not trigger the warning,
+ instead we get the wrong strings, like "func2" for DW_AT_producer and
+ "build/gdb/testsuite" for DW_AT_name of the DW_TAG_compile_unit DIE.
+
+ Fix this by parsing the .debug_str_offsets header in read_dwo_str_index.
+
+ Add a FIXME that we should not parse this for every call.
+
+ Tested on x86_64-linux.
+
+2022-06-27 Tom de Vries <tdevries@suse.de>
+
+ [gdb/build] Fix gdbserver build with -fsanitize=thread
+ [ Copied from gcc commit 153689603fd ("[gdb/build] Fix gdbserver build with
+ -fsanitize=thread"). ]
+
+ When building gdbserver with -fsanitize=thread (added to CFLAGS/CXXFLAGS) we
+ run into:
+ ...
+ ld: ../libiberty/libiberty.a(safe-ctype.o): warning: relocation against \
+ `__tsan_init' in read-only section `.text'
+ ld: ../libiberty/libiberty.a(safe-ctype.o): relocation R_X86_64_PC32 \
+ against symbol `__tsan_init' can not be used when making a shared object; \
+ recompile with -fPIC
+ ld: final link failed: bad value
+ collect2: error: ld returned 1 exit status
+ make[1]: *** [libinproctrace.so] Error 1
+ ...
+ which looks similar to what is described in commit 78e49486944 ("[gdb/build]
+ Fix gdbserver build with -fsanitize=address").
+
+ The gdbserver component builds a shared library libinproctrace.so, which uses
+ libiberty and therefore requires the pic variant. The gdbserver Makefile is
+ setup to use this variant, if available, but it's not there.
+
+ Fix this by listing gdbserver in the toplevel configure alongside libcc1, as a
+ component that needs the libiberty pic variant, setting:
+ ...
+ extra_host_libiberty_configure_flags=--enable-shared
+ ...
+
+ Tested on x86_64-linux.
+
+ ChangeLog:
+
+ 2022-06-27 Tom de Vries <tdevries@suse.de>
+
+ * configure.ac: Build libiberty pic variant for gdbserver.
+ * configure: Regenerate.
+
+2022-06-27 Nick Clifton <nickc@redhat.com>
+
+ Disable execstack and rwx segments warnings for MIPS targets.
+ PR 29263
+ * configure.ac: Move HPPA specific code from here...
+ * configure.tgt: ... to here. Add similar code for MIPS.
+ Move code for CRIS, MIPS and HPPA to block at start of file.
+ * configure: Regenerate.
+
+2022-06-27 Jan Beulich <jbeulich@suse.com>
+
+ bfd: prune config.bfd's setting of targ_archs
+ The final "match all" case can take care of a few explicit entries:
+ Purge those. Also move s12z* into proper position (the table is
+ otherwise sorted, after all).
+
+2022-06-27 Jan Beulich <jbeulich@suse.com>
+
+ drop XC16x bits
+ Commit 04f096fb9e25 ("Move the xc16x target to the obsolete list") moved
+ the architecture from the "obsolete but still available" to the
+ "obsolete / support removed" list in config.bfd, making the architecture
+ impossible to enable (except maybe via "enable everything" options").
+
+ Note that I didn't touch */po/*.po{,t} on the assumption that these
+ would be updated by some (half)automatic means.
+
+2022-06-27 Bhuvanendra Kumar N <Bhuvanendra.KumarN@amd.com>
+
+ Fix location list offset address dump under DW_AT_location (dwarf-5)
+ For clang compiled objects with dwarf-5, location list offset address dump
+ under DW_AT_location is corrected, where DW_FORM_loclistx is used. While
+ dumping the location list offset, the address dumped is wrong where it was
+ refering to .debug_addr instead of .debug_loclists
+
+ * dwarf.c (fetch_indexed_value): Add base_address as parameter and
+ use it to access the section offset.
+ (read_and_display_attr_value): Handle DW_FORM_loclistx form separately.
+ Pass loclists_base to fetch_indexed_value().
+
+2022-06-27 Alan Modra <amodra@gmail.com>
+
+ PowerPC64 .branch_lt address
+ .branch_lt is really an extension of .plt, as is .iplt. We'd like all
+ of the PLT sections to be fixed relative to .TOC. after stub sizing,
+ because changes in offset to PLT entries might mean a change in stub
+ sizes. When -z relro, the relro layout does this by laying out
+ sections from the end of the relro segment. So for example, a change
+ in .eh_frame (which happens after stub sizing) will keep the same GOT
+ to PLT offset when -z relro. Not so when -z norelro, because then the
+ usual forward layout of section is done and .got is more aligned than
+ .branch_lt.
+
+ * emulparams/elf64ppc.sh: Set .branch_lt address fixed relative
+ to .got.
+ * testsuite/ld-powerpc/elfv2exe.d: Adjust to suit.
+
+2022-06-27 Alan Modra <amodra@gmail.com>
+
+ -z relro relaxation and ld script SIZEOF
+ A number of targets use assignments like:
+ . = DATA_SEGMENT_RELRO_END (SIZEOF (.got.plt) >= 12 ? 12 : 0, .);
+ (from i386) in linker scripts to put the end of the relro segment past
+ the header in .got.plt. Examination of testcases like those edited by
+ this patch instead sees the end of the relro segment being placed at
+ the start of .got.plt. For the i386 pie1 test:
+
+ [ 9] .got.plt PROGBITS 00002000 001000 00000c 04 WA 0 0 4
+
+ GNU_RELRO 0x000f90 0x00001f90 0x00001f90 0x00070 0x00070 R 0x1
+
+ A map file shows:
+
+ .dynamic 0x0000000000001f90 0x70
+ *(.dynamic)
+ .dynamic 0x0000000000001f90 0x70 tmpdir/pie1.o
+ 0x0000000000001f90 _DYNAMIC
+
+ .got 0x0000000000002000 0x0
+ *(.got)
+ .got 0x0000000000002000 0x0 tmpdir/pie1.o
+ *(.igot)
+ 0x0000000000002ff4 . = DATA_SEGMENT_RELRO_END (., (SIZEOF (.got.plt) >= 0xc)?0xc:0x0)
+
+ .got.plt 0x0000000000002000 0xc
+ *(.got.plt)
+ .got.plt 0x0000000000002000 0xc tmpdir/pie1.o
+ 0x0000000000002000 _GLOBAL_OFFSET_TABLE_
+
+ The DATA_SEGMENT_RELRO_END value in the map file is weird too. All of
+ this is triggered by SIZEOF (.got.plt) being evaluated wrongly as
+ zero. Fix it by taking into account the action of
+ lang_reset_memory_regions during relaxation.
+
+ * ldexp.c (fold_name <SIZEOF>): Use rawsize if size has been reset.
+ * ldlang.c (lang_size_sections_1): Don't reset processed_vma here.
+ * testsuite/ld-i386/pie1.d: Adjust to suit.
+ * testsuite/ld-x86-64/pr20830a.d: Likewise.
+ * testsuite/ld-x86-64/pr20830b.d: Likewise.
+ * testsuite/ld-x86-64/pr21038a.d: Likewise.
+ * testsuite/ld-x86-64/pr21038b.d: Likewise.
+ * testsuite/ld-x86-64/pr21038c.d: Likewise.
+
+2022-06-27 GDB Administrator <gdbadmin@sourceware.org>
+
+ Automatic date update in version.in
+
+2022-06-26 GDB Administrator <gdbadmin@sourceware.org>
+
+ Automatic date update in version.in
+
+2022-06-25 Fangrui Song <i@maskray.me>
+
+ arm: Define elf_backend_extern_protected_data to 0 [PR 18705]
+ Similar to commit 4fb55bf6a9606eb7b626c30a9f4e71d6c2d4fbb2 for aarch64.
+
+ Commit b68a20d6675f1360ea4db50a9835c073675b9889 changed ld to produce
+ R_ARM_GLOB_DAT but that defeated the purpose of protected visibility
+ as an optimization. Restore the previous behavior (which matches
+ ld.lld) by defining elf_backend_extern_protected_data to 0.
+
+2022-06-25 Tom Tromey <tom@tromey.com>
+
+ Fix corrupt DWARF in dw2-double-set-die-type
+ The dw2-double-set-die-type.exp test case caused an AddressSanitizer
+ failure in the new DWARF scanner.
+
+ The immediate cause was bad DWARF in the test -- in particular, the
+ the sibling attribute here:
+
+ <2><181>: Abbrev Number: 33 (DW_TAG_subprogram)
+ <182> DW_AT_external : 1
+ <183> DW_AT_name : address
+ <18b> DW_AT_type : <0x171>
+ <18f> DW_AT_declaration : 1
+ <190> DW_AT_sibling : <0x1a1>
+ ...
+ <1><1a1>: Abbrev Number: 23 (DW_TAG_pointer_type)
+ <1a2> DW_AT_byte_size : 4
+ <1a3> DW_AT_type : <0x1a7>
+
+ ...points to a "sibling" DIE that is at a different child depth.
+
+ Because this test case doesn't really require sibling attributes, this
+ patch fixes the problem by removing them from the test.
+
+ Note that gdb is not generally robust against malformed DWARF.
+ Detecting and compensating for this problem would probably be
+ expensive and, IMO, is better left to some (still hypothetical) DWARF
+ linter.
+
+2022-06-25 Tom Tromey <tom@tromey.com>
+
+ Fix end of CU calculation in cooked_indexer::index_dies
+ cooked_indexer::index_dies incorrect computes the end of the current
+ CU in the .debug_info. This isn't readily testable without writing
+ intentionally corrupt DWARF, but it's apparent through observation: it
+ is currently based on 'info_ptr', which does not always point to the
+ start of the CU. This patch fixes the expression. Tested on x86-64
+ Fedora 34.
+
+2022-06-25 Tiezhu Yang <yangtiezhu@loongson.cn>
+
+ gdb: LoongArch: Implement loongarch_linux_syscall_next_pc()
+ When FRAME is at a syscall instruction, return the PC of the next
+ instruction to be executed.
+
+ gdb: LoongArch: Define register numbers and clean up code
+ This commit defines register numbers of various important registers,
+ we can use them directly in the related code, and also clean up some
+ code to make them more clear and readable.
+
+2022-06-25 GDB Administrator <gdbadmin@sourceware.org>
+
+ Automatic date update in version.in
+
+2022-06-24 Pedro Alves <pedro@palves.net>
+
+ Eliminate TUI/CLI observers duplication
+ For historical reasons, the CLI and the TUI observers are basically
+ exact duplicates, except for the downcast:
+
+ cli:
+ struct cli_interp *cli = as_cli_interp (interp);
+ tui:
+ struct interp *tui = as_tui_interp (interp);
+
+ and how they get at the interpreter's ui_out:
+
+ cli:
+ cli->cli_uiout
+ tui:
+ tui->interp_ui_out ()
+
+ Since interp_ui_out() is a virtual method that also works for the CLI
+ interpreter, and, both the CLI and the TUI interpreters inherit from
+ the same base class (cli_interp_base), we can convert the CLI
+ observers to cast to cli_interp_base instead and use interp_ui_out()
+ too. With that, the CLI observers will work for the TUI interpreter
+ as well. This lets us completely eliminate the TUI observers. That's
+ what this commit does.
+
+ Change-Id: Iaf6cf12dfa200ed3ab203a895a72b69dfedbd6e0
+
+2022-06-24 Pedro Alves <pedro@palves.net>
+
+ Revert "Delete delete_thread_silent"
+ Turns out we'll be gaining a new use of this function very soon, the
+ incoming AMDGPU port needs it. Let's add it back, as it isn't really
+ hurting anything.
+
+ This reverts commit 39b8a8090ed7e8967ceca3655aa5f3a2ae91219d.
+
+2022-06-24 Yvan Roux <yvan.roux@foss.st.com>
+
+ gdb/arm: Update the value of active sp when base sp changes
+ For Arm Cortex-M33 with security extensions, there are 4 different
+ stacks pointers (msp_s, msp_ns, psp_s, psp_ns).
+ When plain "sp" is updated during unwinding of the stack, the active
+ stack pointer of the 4 stack pointers needs to be kept in sync.
+
+2022-06-24 Andrew Burgess <aburgess@redhat.com>
+
+ gdb/testsuite: remove unneeded calls to get_compiler_info
+ It is not necessary to call get_compiler_info before calling
+ test_compiler_info, and, after recent commits that removed setting up
+ the gcc_compiled, true, and false globals from get_compiler_info,
+ there is now no longer any need for any test script to call
+ get_compiler_info directly.
+
+ As a result every call to get_compiler_info outside of lib/gdb.exp is
+ redundant, and this commit removes them all.
+
+ There should be no change in what is tested after this commit.
+
+2022-06-24 Andrew Burgess <aburgess@redhat.com>
+
+ gdb/testsuite: remove global gcc_compiled from gdb.exp
+ After this commit the gcc_compiled global is no longer exported from
+ lib/gdb.exp. In theory we could switch over all uses of gcc_compiled
+ to instead call test_compiler_info directly, however, I have instead
+ added a new proc to gdb.exp: 'is_c_compiler_gcc'. I've then updated
+ the testsuite to call this proc instead of using the global.
+
+ Having a new proc specifically for this task means that we have a
+ single consistent pattern for detecting gcc. By wrapping this logic
+ within a proc that calls test_compiler_info, rather than using the
+ global, means that test scripts don't need to call get_compiler_info
+ before they read the global, simply calling the new proc does
+ everything in one go.
+
+ As a result I've been able to remove the get_compiler_info calls from
+ all the test scripts that I've touched in this commit.
+
+ In some of the tests e.g. gdb.dwarf2/*.exp, the $gcc_compiled flag was
+ being checked at the top of the script to decide if the whole script
+ should be skipped or not. In these cases I've called the new proc
+ directly and removed all uses of gcc_compiled.
+
+ In other cases, e.g. most of the gdb.base scripts, there were many
+ uses of gcc_compiled. In these cases I set a new global gcc_compiled
+ near the top of the script, and leave the rest of the script
+ unchanged.
+
+ There should be no changes in what is tested after this commit.
+
+2022-06-24 Pedro Alves <pedro@palves.net>
+
+ Include count of unexpected core files in gdb.sum summary
+ If GDB, GDBserver, a testcase program, Valgrind, etc. unexpectedly
+ crash while running the GDB testsuite, and you've setup your machine
+ such that core files are dumped in the current directory instead of
+ being shoved somewhere by abrt, apport, or similar (as you should for
+ proper GDB testing), you'll end up with an unexpected core file in the
+ $build/gdb/testsuite/ directory.
+
+ It can happen that GDB, GDBserver, etc. even crashes _after_ gdb_exit,
+ during teardown, and thus such a crash won't be noticed by looking at
+ the gdb.sum file at all. This commit aims at improving that, by
+ including a new "unexpected core files" line in the testrun summary.
+
+ For example, here's what I get on x86-64 Ubuntu 20.04, with this
+ patch:
+
+ === gdb Summary ===
+
+ # of unexpected core files 12 << new info
+ # of expected passes 107557
+ # of unexpected failures 35
+ # of expected failures 77
+ # of unknown successes 2
+ # of known failures 114
+ # of untested testcases 31
+ # of unsupported tests 139
+
+ I have my core pattern setup like this:
+
+ $ cat /proc/sys/kernel/core_pattern
+ core.%e.%p.%h.%t
+
+ That's:
+
+ %e: executable filename
+ %p: pid
+ %h: hostname
+ %t: UNIX time of dump
+
+ and so I get these core files:
+
+ $ ls -1 testsuite/core.*
+ testsuite/core.connect-with-no.216191.nelson.1656002431
+ testsuite/core.connect-with-no.217729.nelson.1656002431
+ testsuite/core.gdb.194247.nelson.1656002423
+ testsuite/core.gdb.226014.nelson.1656002435
+ testsuite/core.gdb.232078.nelson.1656002438
+ testsuite/core.gdb.352268.nelson.1656002441
+ testsuite/core.gdb.4152093.nelson.1656002337
+ testsuite/core.gdb.4154515.nelson.1656002338
+ testsuite/core.gdb.4156668.nelson.1656002339
+ testsuite/core.gdb.4158871.nelson.1656002341
+ testsuite/core.gdb.468495.nelson.1656002444
+ testsuite/core.vgdb.4192247.nelson.1656002366
+
+ where we can see that GDB crashed a number of times, but also
+ Valgrind's vgdb, and a couple testcase programs. Neither of which is
+ good.
+
+ If your core_pattern is just "core" (but why??), then I guess that you
+ may end up with just a single core file in testsuite/. Still, that is
+ one core file too many.
+
+ Above, we see a couple cores for "connect-with-no", which are the
+ result of gdb.server/connect-with-no-symbol-file.exp. This is a case
+ mentioned above -- while the program crashed, that happens during
+ testcase teardown, and it goes unnoticed (without this commit) by
+ gdb.sum results. Vis:
+
+ $ make check TESTS="gdb.server/connect-with-no-symbol-file.exp"
+ ...
+ === gdb Summary ===
+
+ # of unexpected core files 2
+ # of expected passes 8
+
+ ...
+ $
+
+ The tests fully passed, but still the testcase program crashed
+ somehow:
+
+ $ ls -1 testsuite/core.*
+ testsuite/core.connect-with-no.941561.nelson.1656003317
+ testsuite/core.connect-with-no.941682.nelson.1656003317
+
+ Against --target_board=native-extended-gdbserver it's even worse. I
+ get:
+
+ # of unexpected core files 26
+
+ and note that when GDBserver hits an assertion failure, it exits with
+ error, instead of crashing with SIGABRT. I think that should be
+ changed, at least on development builds, but that would be for another
+ patch. After such patch, I suspect the number of unexpected cores
+ will be higher, as there are likely teardown GDBserver assertions that
+ we're not noticing.
+
+ I decided to put this new info in the "gdb Summary" section, as that's
+ a place people already are used to looking at, either when looking at
+ the tail of gdb.sum, or when diffing gdb.sum files, and we've already
+ extended this section before, to include the count of DUPLICATE and
+ PATH problems, so there's precedent.
+
+ Implementation-wise, the new line is appended after DejaGnu is
+ finished, with a shell script that is invoked by the Makefile. It is
+ done this way so that serial and parallel testing work the same way.
+ My initial cut at an implementation was in TCL, straight in
+ testsuite/lib/check-test-names.exp, where DUPLICATES and PATH are
+ handled, like so:
+
+ @@ -148,6 +159,10 @@ namespace eval ::CheckTestNames {
+ $counts(paths,$which)
+ maybe_show_count "# of duplicate test names\t" \
+ $counts(duplicates,$which)
+ +
+ + set cores [glob -nocomplain -directory $::objdir core*]
+ + maybe_show_count "# of unexpected core files\t" \
+ + [llength $cores]
+ }
+
+ But that would only work for serial testing, as in parallel testing,
+ the final gdb.sum is generated by aggregating the results of all the
+ individual gdb.sum files, and dg-extract-results.sh doesn't know about
+ our new summary line. And I don't think that dg-extract-results.sh
+ should be taught about it, since the count of core files is not
+ something that we want to count many times, once per testcase, and
+ then add up the subcounts at the end. Every time we count the core
+ files, we're already counting the final count.
+
+ I considered using the Tcl implementation in serial mode, and the
+ script approach for parallel testing, but that has the obvious
+ downside of implementing and maintaining the same thing twice. In the
+ end, I settled on the script approach for serial mode too, which
+ requires making the "check-single" rule print the tail end of the
+ gdb.sum file, with a side effect being that if you look at the
+ terminal after a run (instead of at the gdb.sum file), you'll see the
+ "gdb Summary" section twice, once without the unexpected core lines
+ printed, and then another with. IMO, this isn't an issue; when
+ testing in parallel mode, if you look at the terminal after "make -jN
+ check", you'll also see multiple "gdb Summary" sections printed.
+
+ Change-Id: I190b8d41856d49ad143854b6e3e6ccd7caa04491
+
+2022-06-24 Pedro Alves <pedro@palves.net>
+
+ Improve core file path detection & put cores in output dir
+ After a testrun, I noticed that I have some kernel-produced cores for
+ testcase programs, under build/gdb/testsuite/, which shouldn't be
+ there:
+
+ $ ls -1 testsuite/core.*
+ testsuite/core.annota1.1274351.nelson.1656004407
+ testsuite/core.annota3.1288474.nelson.1656004414
+ testsuite/core.exitsignal.1240674.nelson.1656004391
+
+ I have my core pattern setup like this:
+
+ $ cat /proc/sys/kernel/core_pattern
+ core.%e.%p.%h.%t
+
+ That's:
+
+ %e: executable filename
+ %p: pid
+ %h: hostname
+ %t: UNIX time of dump
+
+ so it's easy to tell which program produced the core from the core
+ file name.
+
+ From above, we can tell that the corresponding testcases are
+ gdb.base/annota1.exp, gdb.base/annota3.exp and
+ gdb.base/exitsignal.exp.
+
+ At least gdb.base/annota1.exp and gdb.base/annota3.exp have code in
+ them to delete the core file. However, that isn't working for me,
+ because said code only looks for cores named exactly either "core" or
+ "core.PID", and my core_pattern doesn't match that.
+
+ Another issue I noticed, is that I have not been running
+ gdb.base/bigcore.exp, for a similar reason. I get:
+
+ Program terminated with signal SIGABRT, Aborted.
+ The program no longer exists.
+ (gdb) PASS: gdb.base/bigcore.exp: signal SIGABRT
+ UNTESTED: gdb.base/bigcore.exp: can't generate a core file
+
+ But I actually have a core file under the testcase's output dir:
+
+ $ find . -name "core.*"
+ ./testsuite/outputs/gdb.base/bigcore/core.bigcore.2306705.nelson.1656005213
+ $
+
+ This commit fixes these things, by adding a find_core_file routine
+ that searches core files in a way that works with my core pattern as
+ well. This then also adds a convenience remove_core routine as a
+ wrapper around find_core_file that removes the found core file.
+
+ In addition, it changes some testcases that expect to have their
+ program dump core, to switch the inferior's cwd to the testcase's
+ output dir, so that the core is dumped there instead of in
+ build/gdb/testsuite/. Some testcases were already doing that, but not
+ all. The idea is that any core file dumped in build/gdb/testsuite/ is
+ an unexpected core file. The next patch will add a count of such
+ unexpected core files to gdb.sum.
+
+ Another change is that the directory changing is now done with "set
+ cwd" instead of with "cd". "set cwd" only affects the inferior cwd,
+ while "cd" affects GDB's cwd too. By using "set cwd" instead of "cd",
+ if GDB dumps core in these testcases, the GDB core dump will still end
+ up in build/gdb/testsuite/, and can thus be detected as an unexpected
+ core.
+
+ Change-Id: I45068f21ffd4814350aaa8a3cc65cad5e3107607
+
+2022-06-24 Andrew Burgess <aburgess@redhat.com>
+
+ gdb: make use of RAII in run_inferior_call
+ In passing I noticed that there are three local variables in
+ run_inferior_call that are used to save, and then restore some state,
+ I think these could all be replaced with a RAII style scoped_restore
+ instead.
+
+ Of the three locals that I've changed, the only one that I believe is
+ now restored in a different location is ui::async, before this commit
+ the async field was restored after a call to either delete_file_handle
+ or ui_register_input_event_handler, and after this commit, the field
+ is restored before these calls. However, I don't believe that either
+ of these functions depend on the value of the async field, so I
+ believe the commit is fine.
+
+ Tested on x86-64/Linux passes with no regressions.
+
+2022-06-24 Pedro Alves <pedro@palves.net>
+
+ Delete delete_thread_silent
+ delete_thread_silent is no longer used anywhere. Delete it.
+
+ Change-Id: Iafcec12339861d5ab2e29c14d7b1f884c9e11c0f
+
+2022-06-24 GDB Administrator <gdbadmin@sourceware.org>
+
+ Automatic date update in version.in
+
+2022-06-23 Tom Tromey <tromey@adacore.com>
+
+ Don't declare cli_set_logging
+ cli_set_logging is declared but not defined. It's probably a leftover
+ from whenever interpreters were changed to use inheritance. This
+ patch removes the declaration. Tested by grep and rebuilding.
+
+ Use PyBool_FromLong
+ I noticed a few spots that were explicitly creating new references to
+ Py_True or Py_False. It's simpler here to use PyBool_FromLong, so
+ this patch changes all the places I found.
+
+2022-06-23 Alan Modra <amodra@gmail.com>
+
+ PowerPC64: fix assertion in ppc_build_one_stub with -Os code
+ save_res stubs aren't written in ppc_build_one_stub, their offsets
+ (which are zero) should not be checked.
+
+ * elf64-ppc.c (ppc_build_one_stub): Don't check save_res offsets.
+
+2022-06-23 Alan Modra <amodra@gmail.com>
+
+ Re: PowerPC64: stub debug dump
+ Let's show the current stub as well as the previous one. Of interest
+ is the current offset and a new field, id. Check that the build
+ hash table traversal is in the same order as sizing traversal too.
+
+ * elf64-ppc.c (struct ppc_stub_hash_entry): Add id.
+ (struct ppc_link_hash_table): Add stub_id.
+ (stub_hash_newfunc): Init id and symtype.
+ (dump_stub): New function, extracted from..
+ (dump_previous_stub): ..here. Deleted.
+ (ppc_build_one_stub): Sanity check stub id as well as offset.
+ Show current stub as well as previous.
+ (ppc_size_one_stub): Set stub id.
+ (ppc64_elf_size_stubs): Init stub_id before traversal.
+ (ppc64_elf_build_stubs): Likewise.
+
+2022-06-23 Fangrui Song <maskray@google.com>
+
+ aarch64: Allow PC-relative relocations against protected STT_FUNC for -shared
+ __attribute__((visibility("protected"))) void *foo() {
+ return (void *)foo;
+ }
+
+ gcc -fpic -shared -fuse-ld=bfd fails with the confusing diagnostic:
+
+ relocation R_AARCH64_ADR_PREL_PG_HI21 against symbol `foo' which may bind externally can not be used when making a shared object; recompile with -fPIC
+
+ Call _bfd_elf_symbol_refs_local_p with local_protected==true to suppress
+ the error. The new behavior matches gold and ld.lld.
+
+ Note: if some code tries to use direct access relocations to take the
+ address of foo (likely due to -fno-pic), the pointer equality will
+ break, but the error should be reported on the executable link, not on
+ the innocent shared object link. glibc 2.36 will give a warning at
+ relocation resolving time.
+
+2022-06-23 Fangrui Song <maskray@google.com>
+
+ aarch64: Define elf_backend_extern_protected_data to 0 [PR 18705]
+ Follow-up to commit 90b7a5df152a64d2bea20beb438e8b81049a5c30
+ ("aarch64: Disallow copy relocations on protected data").
+
+ Commit 32f573bcb3aaa1c9defcad79dbb5851fcc02ae2d changed ld to produce
+ R_AARCH64_GLOB_DAT but that defeated the purpose of protected visibility
+ as an optimization. Restore the previous behavior (which matches
+ ld.lld) by defining elf_backend_extern_protected_data to 0.
+
+2022-06-23 GDB Administrator <gdbadmin@sourceware.org>
+
+ Automatic date update in version.in
+
+2022-06-22 Tom Tromey <tromey@adacore.com>
+
+ Use std::string for interpreter_p
+ The global interpreter_p is a manually-managed 'char *'. This patch
+ changes it to be a std::string instead, and removes some erroneous
+ comments.
+
+ Move mi_interpreter to mi-interp.h
+ I noticed that touching interps.h caused a lot of recompilation. I
+ tracked this down to mi-common.h including this file. This patch
+ moves the MI interpreter to mi-interp.h, which cuts down on
+ recompilation when modifying interps.h.
+
+ Use unique_xmalloc_ptr in interp
+ This changes interp::m_name to be a unique_xmalloc_ptr, removing some
+ manual memory management. It also cleans up the initialization of the
+ 'inited' member, and moves the 'private:' and 'public:' keywords to
+ their proper spots.
+
+2022-06-22 Fangrui Song <i@maskray.me>
+
+ aarch64: Disallow copy relocations on protected data
+ If an executable has copy relocations for extern protected data, that
+ can only work if the shared object containing the definition is built
+ with assumptions (a) the compiler emits GOT-generating relocations (b)
+ the linker produces R_*_GLOB_DAT instead of R_*_RELATIVE. Otherwise the
+ shared object uses its own definition directly and the executable
+ accesses a stale copy. Note: the GOT relocations defeat the purpose of
+ protected visibility as an optimization, and it turns out this never
+ worked perfectly.
+
+ glibc 2.36 will warn on copy relocations on protected data. Let's
+ produce a warning at link time, matching ld.lld which has been used on
+ many aarch64 OSes.
+
+ Note: x86 requires GNU_PROPERTY_NO_COPY_ON_PROTECTED to have the error.
+ This is to largely due to GCC 5's "x86-64: Optimize access to globals in
+ PIE with copy reloc" which started to use direct access relocations for
+ external data symbols in -fpie mode.
+
+ GCC's aarch64 port does not have the change. Nowadays with most builds
+ switching to -fpie/-fpic, aarch64 mostly doesn't need to worry about
+ copy relocations. So for aarch64 we simply don't check
+ GNU_PROPERTY_NO_COPY_ON_PROTECTED.
+
+2022-06-22 Kumar N, Bhuvanendra <Kavitha.Natarajan@amd.com>
+
+ Binutils support for split-dwarf and dwarf-5
+ * dwarf.c (fetch_indexed_string): Added new parameter
+ str_offsets_base to calculate the string offset.
+ (read_and_display_attr_value): Read DW_AT_str_offsets_base
+ attribute.
+ (process_debug_info): While allocating memory and initializing
+ debug_information, do it for do_debug_info also, if its true.
+ (load_separate_debug_files): Load .debug_str_offsets if exists.
+ * dwarf.h (struct debug_info): Add str_offsets_base field.
+
+2022-06-22 Nelson Chu <nelson.chu@sifive.com>
+
+ RISC-V: Reorder the prefixed extensions which are out of order.
+ This patch has been pending for almost a year... However, I noticed that
+ llvm can already re-order the extensions, even if they are out of orders.
+ Not really sure if they can also re-order the single letter extensions,
+ but at least we can do this for the multi-letter extensions in binutils.
+
+ bfd/
+ * elfxx-riscv.c (riscv_parse_prefixed_ext): Removed the code which are
+ used to check the prefixed extension orders.
+ gas/
+ * testsuite/gas/riscv/march-fail-order-x-z.d: Removed since we will help
+ tp reorder the prefixed extensions for now.
+ * testsuite/gas/riscv/march-fail-order-x-z.l: Likewise.
+ * testsuite/gas/riscv/march-fail-order-x.d: Likewise.
+ * testsuite/gas/riscv/march-fail-order-x.l: Likewise.
+ * testsuite/gas/riscv/march-fail-order-z.d: Likewise.
+ * testsuite/gas/riscv/march-fail-order-z.l: Likewise.
+
+2022-06-22 Nelson Chu <nelson.chu@sifive.com>
+
+ RISC-V: Use single h extension to control hypervisor CSRs and instructions.
+ According to the picture 28.1 in the current ISA spec, h is no larger the
+ multi-letter extension, it is a single extension after v. Therefore, this
+ patch fix the implementation, and use the single h to control hypervisor
+ CSRs and instructions, which we promised to do before.
+
+ bfd/
+ * elfxx-riscv.c (riscv_supported_std_ext): Added h with version 1.0 after v.
+ (riscv_supported_std_h_ext): Removed.
+ (riscv_all_supported_ext): Updated since riscv_supported_std_h_ext is removed.
+ (riscv_prefix_ext_class): Removed RV_ISA_CLASS_H.
+ (parse_config): Updated since riscv_prefix_ext_class is removed.
+ (riscv_recognized_prefixed_ext): Likewise.
+ (riscv_get_default_ext_version): Likewise.
+ (riscv_multi_subset_supports): Handle INSN_CLASS_H for hypervisor instructions.
+ (riscv_multi_subset_supports_ext): Likewise.
+ gas/
+ * config/tc-riscv.c (riscv_csr_class): Added CSR_CLASS_H and CSR_CLASS_H_32 for
+ hypervisor CSRs.
+ (riscv_csr_address): Likewise.
+ * testsuite/gas/riscv/csr-version-1p10.d: Updated since hypervisor CSRs are
+ controlled by single h extension for now.
+ * testsuite/gas/riscv/csr-version-1p10.l: Likewise.
+ * testsuite/gas/riscv/csr-version-1p11.d: Likewise.
+ * testsuite/gas/riscv/csr-version-1p11.l: Likewise.
+ * testsuite/gas/riscv/csr-version-1p12.d: Likewise.
+ * testsuite/gas/riscv/csr-version-1p12.l: Likewise.
+ * testsuite/gas/riscv/csr-version-1p9p1.d: Likewise.
+ * testsuite/gas/riscv/csr-version-1p9p1.l: Likewise.
+ * testsuite/gas/riscv/h-ext-32.d: Added h to architecture string.
+ * testsuite/gas/riscv/h-ext-64.d: Likewise.
+ * testsuite/gas/riscv/march-fail-single-prefix-h: Removed since h is no
+ longer multi-letter extension.
+ * testsuite/gas/riscv/march-fail-unknown-h.d: Likewise.
+ include/
+ * opcode/riscv-opc.h: Control hypervisor CSRs by h extension, rather than
+ the privileged spec verisons.
+ * opcode/riscv.h (riscv_insn_class): Added INSN_CLASS_H.
+ opcodes/
+ * riscv-opc.c (riscv_opcodes): Control hypervisor instructions by h extension.
+
+2022-06-22 Tsukasa OI <research_trasio@irq.a4lg.com>
+
+ RISC-V: Add 'H' to canonical extension ordering
+ This commit adds 'H' to canonical extension ordering based on current
+ consensus (not officially ratified as a new ISA specification manual
+ but discussion for software compatibility is made).
+
+ bfd/ChangeLog
+
+ * elfxx-riscv.c (riscv_ext_canonical_order): Add 'H' for
+ canonical extension ordering based on current consensus.
+
+2022-06-22 Tsukasa OI <research_trasio@irq.a4lg.com>
+
+ RISC-V: Prepare i18n for required ISA extensions
+ Some strings returned by the riscv_multi_subset_supports_ext function
+ contain not just extension names but words like "and" and "or".
+ This commit wraps such strings with the gettext macro (_) for
+ internationalization in the future.
+
+ bfd/ChangeLog:
+
+ * elfxx-riscv.c (riscv_multi_subset_supports_ext): Wrap some
+ strings with the gettext macro to prepare future i18n.
+
+2022-06-22 Tsukasa OI <research_trasio@irq.a4lg.com>
+
+ RISC-V: Fix inconsistent error message (range)
+ This commit fixes inconsistent error message format involving compressed
+ funct<n> fields. In specific, funct6 had an error message with range
+ 0..2^<n> ("0..64") unlike other funct<n> fields with 0..2^<n>-1
+ (e.g. funct4 with "0..15").
+
+ gas/ChangeLog:
+
+ * config/tc-riscv.c (riscv_ip): Fix inconsistent error message.
+
+2022-06-22 Marcus Nilsson <brainbomb@gmail.com>
+
+ readelf: replace xmalloc with malloc in slurp_relr_relocs
+ Using xmalloc makes the null check redundant since failing allocation
+ will exit the program. Instead use malloc and let the error be
+ conveyed up the call chain.
+
+2022-06-22 Alan Modra <amodra@gmail.com>
+
+ PowerPC64: stub debug dump
+ powerpc64le-linux-ld is failing the assertion in ppc_build_one_stub,
+ again apparently, which means a stub will overwrite the tail of a
+ previous stub. The difficulty with debugging these issues is that
+ it's not a problem with the stub that triggers the assertion, but the
+ previous stub in that section. This patch keeps track of the last
+ stub and adds a debug dump. Hopefully that will help.
+
+ * elf64-ppc.c (enum _ppc64_sec_type): Add sec_stub.
+ (struct _ppc64_elf_section_data): Add u.last_ent.
+ (dump_previous_stub): New function.
+ (ppc_build_one_stub): Keep track of previous stub, and dump it
+ when finding an overlapping stub.
+
+2022-06-22 Alan Modra <amodra@gmail.com>
+
+ PR29270, DW_FORM_udata signed output
+ PR 29270
+ * dwarf.c (read_and_display_attr_value): Output DW_FORM_udata
+ as unsigned.
+
+2022-06-22 GDB Administrator <gdbadmin@sourceware.org>
+
+ Automatic date update in version.in
+
+2022-06-21 Nick Alcock <nick.alcock@oracle.com>
+
+ ld: regenerate configure after recent misgeneration
+ Things work again after this.
+
+ ld/ChangeLog:
+
+ * configure: Regenerate.
+
+2022-06-21 Nick Alcock <nick.alcock@oracle.com>
+
+ libctf: tests: prune warnings from compiler output
+ We were failing to call prune_warnings appropriately, leading to
+ false-positive test failures on some platforms (observed on
+ sparclinux).
+
+ libctf/ChangeLog:
+
+ * testsuite/lib/ctf-lib.exp: Prune warnings from compiler and
+ linker output.
+ * testsuite/libctf-regression/libctf-repeat-cu.exp: Likewise,
+ and ar output too.
+
+2022-06-21 Nick Alcock <nick.alcock@oracle.com>
+
+ libctf: avoid mingw warning
+ A missing paren led to an intended cast to avoid dependence on the size
+ of size_t in one argument of ctf_err_warn applying to the wrong type by
+ mistake.
+
+ libctf/ChangeLog:
+
+ * ctf-serialize.c (ctf_write_mem): Fix cast.
+
+2022-06-21 Nick Alcock <nick.alcock@oracle.com>
+
+ libctf: fix linking together multiple objects derived from the same source
+ Right now, if you compile the same .c input repeatedly with CTF enabled
+ and different compilation flags, then arrange to link all of these
+ together, then things misbehave in various ways. libctf may conflate
+ either inputs (if the .o files have the same name, say if they are
+ stored in different .a archives), or per-CU outputs when conflicting
+ types are found: the latter can lead to entirely spurious errors when
+ it tries to produce multiple per-CU outputs with the same name
+ (discarding all but the last, but then looking for types in the earlier
+ ones which have just been thrown away).
+
+ Fixing this is multi-pronged. Both inputs and outputs need to be
+ differentiated in the hashtables libctf keeps them in: inputs with the
+ same cuname and filename need to be considered distinct as long as they
+ have different associated CTF dicts, and per-CU outputs need to be
+ considered distinct as long as they have different associated input
+ dicts. Right now there is nothing tying the two together other than the
+ CU name: fix this by introducing a new field in the ctf_dict_t named
+ ctf_link_in_out, which (for input dicts) points to the associated per-CU
+ output dict (if any), and for output dicts points to the associated
+ input dict. At creation time the name used is completely arbitrary:
+ it's only important that it be distinct if CTF dicts are distinct. So,
+ when a clash is found, adjust the CU name by sticking the number of
+ elements in the input on the end. At output time, the CU name will
+ appear in the linked object, so it matters a little more that it look
+ slightly less ugly: in conflicting cases, append an incrementing
+ integer, starting at 0.
+
+ This naming scheme is not very helpful, but it's hard to see what else
+ we can do. The input .o name may be the same. The input .a name is not
+ even visible to ctf_link, and even *that* might be the same, because
+ .a's can contain many members with the same name, all of which
+ participate in the link. All we really know is that the two have
+ distinct dictionaries with distinct types in them, and at least this way
+ they are all represented, any any symbols, variables etc referring to
+ those types are accurately stored.
+
+ (As a side-effect this also fixes a use-after-free and double-free when
+ errors are found during variable or symbol emission.)
+
+ Use the opportunity to prevent a couple of sources of problems, to wit
+ changing the active CU mappings when a link has already been done
+ (no effect on ld, which doesn't use CU mappings at all), and causing
+ multiple consecutive ctf_link's to have the same net effect as just
+ doing the last one (no effect on ld, which only ever does one
+ ctf_link) rather than having the links be a sort of half-incremental
+ not-really-intended mess.
+
+ libctf/ChangeLog:
+
+ PR libctf/29242
+ * ctf-impl.h (struct ctf_dict) [ctf_link_in_out]: New.
+ * ctf-dedup.c (ctf_dedup_emit_type): Set it.
+ * ctf-link.c (ctf_link_add_ctf_internal): Set the input
+ CU name uniquely when clashes are found.
+ (ctf_link_add): Document what repeated additions do.
+ (ctf_new_per_cu_name): New, come up with a consistent
+ name for a new per-CU dict.
+ (ctf_link_deduplicating): Use it.
+ (ctf_create_per_cu): Use it, and ctf_link_in_out, and set
+ ctf_link_in_out properly. Don't overwrite per-CU dicts with
+ per-CU dicts relating to different inputs.
+ (ctf_link_add_cu_mapping): Prevent per-CU mappings being set up
+ if we already have per-CU outputs.
+ (ctf_link_one_variable): Adjust ctf_link_per_cu call.
+ (ctf_link_deduplicating_one_symtypetab): Likewise.
+ (ctf_link_empty_outputs): New, delete all the ctf_link_outputs
+ and blank out ctf_link_in_out on the corresponding inputs.
+ (ctf_link): Clarify the effect of multiple ctf_link calls.
+ Empty ctf_link_outputs if it already exists rather than
+ having the old output leak into the new link. Fix a variable
+ name.
+ * testsuite/config/default.exp (AR): Add.
+ (OBJDUMP): Likewise.
+ * testsuite/libctf-regression/libctf-repeat-cu.exp: New test.
+ * testsuite/libctf-regression/libctf-repeat-cu*: Main program,
+ library, and expected results for the test.
+
+2022-06-21 Kevin Buettner <kevinb@redhat.com>
+
+ Document how GDB searches for files when using -s, -e, and -se options
+ GDB's documentation of the 'file' command says:
+
+ If you do not specify a directory and the file is not found in the
+ GDB working directory, GDB uses the environment variable PATH as a
+ list of directories to search, just as the shell does when looking
+ for a program to run.
+
+ The same is true for files specified via commandline options -s, -e,
+ and -se.
+
+ This commit adds a cross reference to the file command for these options.
+
+2022-06-21 Nick Clifton <nickc@redhat.com>
+
+ Binutils support for dwarf-5 (location and range lists related)
+ * dwarf.h (struct debug_info): Add rnglists_base field.
+ * dwarf.c (read_and_display_attr_value): Read attribute DW_AT_rnglists_base.
+ (display_debug_rnglists_list): While handling DW_RLE_base_addressx,
+ DW_RLE_startx_endx, DW_RLE_startx_length items, pass the proper parameter
+ value to fetch_indexed_addr(), i.e. fetch the proper entry in .debug_addr section.
+ (display_debug_ranges): Add rnglists_base to the .debug_rnglists base address.
+ (load_separate_debug_files): Load .debug_addr section, if exists.
+
+ Default to disabling the linker warnings about execstack and RWX segments if the target is the HPPA architecture.
+ PR 29263
+ * configure.ac (ac_default_ld_warn_execstack): Default to 'no' for
+ HPPA targets.
+ (ac_default_ld_warn_rwx_segments): Likewise.
+ * configure: Regenerate.
+ * testsuite/ld-elf/elf.exp: Add the --warn-execstack command line
+ option to the command line when running execstack tests for the
+ HPPA target.
+
+2022-06-21 GDB Administrator <gdbadmin@sourceware.org>
+
+ Automatic date update in version.in
+
+2022-06-20 Tom Tromey <tromey@adacore.com>
+
+ Move finish_print out of value_print_options
+ 'finish_print' does not really belong in value_print_options -- this
+ is consulted only when deciding whether or not to print a value, and
+ never during the course of printing. This patch removes it from the
+ structure and makes it a static global in infcmd.c instead.
+
+ Tested on x86-64 Fedora 34.
+
+2022-06-20 Alan Modra <amodra@gmail.com>
+
+ PR29262, memory leak in pr_function_type
+ PR 29262
+ * prdbg.c (pr_function_type): Free "s" on failure path.
+
+ PR29261, memory leak in parse_stab_struct_fields
+ PR 29261
+ * stabs.c (parse_stab_struct_fields): Free "fields" on failure path.
+
+2022-06-20 GDB Administrator <gdbadmin@sourceware.org>
+
+ Automatic date update in version.in
+
+2022-06-19 GDB Administrator <gdbadmin@sourceware.org>
+
+ Automatic date update in version.in
+
+2022-06-18 Tom Tromey <tom@tromey.com>
+
+ Fix assertion failure in copy_type
+ PR exp/20630 points out a simple way to cause an assertion failure in
+ copy_type -- but this was found in the wild a few times as well.
+
+ copy_type only works for objfile-owned types, but there isn't a deep
+ reason for this. This patch fixes the bug by updating copy_type to
+ work for any sort of type.
+
+ Better would perhaps be to finally implement type GC, but I still
+ haven't attempted this.
+
+ Bug: https://sourceware.org/bugzilla/show_bug.cgi?id=20630
+
+2022-06-18 Tomoaki Kawada <kawada@kmckk.co.jp>
+
+ Fix the sorting algorithm for reloc entries
+ The optimized insertion sort algorithm in `elf_link_adjust_relocs`
+ incorrectly assembled "runs" from unsorted entries and inserted them to an
+ already-sorted prefix, breaking the loop invariants of insertion sort.
+ This commit updates the run assembly loop to break upon encountering a
+ non-monotonic change in the sort key.
+
+ PR 29259
+ bfd/
+ * elflink.c (elf_link_adjust_relocs): Ensure run being inserted
+ is sorted.
+ ld/
+ * testsuite/ld-elf/pr29259.d,
+ * testsuite/ld-elf/pr29259.s,
+ * testsuite/ld-elf/pr29259.t: New test.
+
+2022-06-18 Enze Li <enze.li@hotmail.com>
+
+ gdb/python: Export nibbles to python layer
+ This patch makes it possible to allow Value.format_string() to return
+ nibbles output.
+
+ When we set the parameter of nibbles to True, we can achieve the
+ displaying binary values in groups of every four bits.
+
+ Here's an example:
+ (gdb) py print (gdb.Value (1230).format_string (format='t', nibbles=True))
+ 0100 1100 1110
+ (gdb)
+
+ Note that the parameter nibbles is only useful if format='t' is also used.
+
+ This patch also includes update to the relevant testcase and
+ documentation.
+
+ Tested on x86_64 openSUSE Tumbleweed.
+
+2022-06-18 Enze Li <enze.li@hotmail.com>
+
+ gdb/doc: Documentation for the new print command
+ Document the new command "print nibbles" and add a NEWS entry.
+
+2022-06-18 Enze Li <enze.li@hotmail.com>
+
+ gdb: Add new 'print nibbles' feature
+ Make an introduction of a new print setting that can be set by 'set
+ print nibbles [on|off]'. The default value if OFF, which can be changed
+ by user manually. Of course, 'show print nibbles' is also included in
+ the patch.
+
+ The new feature displays binary values by group, with four bits per
+ group. The motivation for this work is to enhance the readability of
+ binary values.
+
+ Here's a GDB session before this patch is applied.
+ (gdb) print var_a
+ $1 = 1230
+ (gdb) print/t var_a
+ $2 = 10011001110
+
+ With this patch applied, we can use the new print setting to display the
+ new form of the binary values.
+ (gdb) print var_a
+ $1 = 1230
+ (gdb) print/t var_a
+ $2 = 10011001110
+ (gdb) set print nibbles on
+ (gdb) print/t var_a
+ $3 = 0100 1100 1110
+
+ Tested on x86_64 openSUSE Tumbleweed.
+
+2022-06-18 GDB Administrator <gdbadmin@sourceware.org>
+
+ Automatic date update in version.in
+
+2022-06-17 Tiezhu Yang <yangtiezhu@loongson.cn>
+
+ gdb: NEWS: Move LoongArch gdbserver to the correct section
+ commit e5ab6af52d38 ("gdbserver: Add LoongArch/Linux support")
+ was merged into the master since GDB 12, so we should put the
+ news in the "Changes since GDB 12" section.
+
+ Thanks Tom Tromey for your correction [1], sorry for that.
+
+ [1] https://sourceware.org/pipermail/gdb-patches/2022-June/190122.html
+
+2022-06-17 Alan Modra <amodra@gmail.com>
+
+ PR29256, memory leak in obj_elf_section_name
+ When handling section names in quotes obj_elf_section_name calls
+ demand_copy_C_string, which puts the name on the gas notes obstack.
+ Such strings aren't usually freed, since obstack_free frees all more
+ recently allocated objects as well as its arg. When handling
+ non-quoted names, obj_elf_section_name mallocs the name. Due to the
+ mix of allocation strategies it isn't possible for callers to free
+ names, if that was desirable. Partially fix this by always creating
+ names on the obstack, which is more efficient anyway. (You still
+ can't obstack_free on error paths due to the xtensa
+ tc_canonicalize_section_name.) Also remove a couple of cases where
+ the name is dup'd for no good reason as far as I know.
+
+ PR 29256
+ * config/obj-elf.c (obj_elf_section_name): Create name on notes
+ obstack.
+ (obj_elf_attach_to_group): Don't strdup group name.
+ (obj_elf_section): Likewise.
+ (obj_elf_vendor_attribute): Use xmemdup0 rather than xstrndup.
+
+2022-06-17 Alan Modra <amodra@gmail.com>
+
+ PR29255, memory leak in make_tempdir
+ PR 29255
+ * bucomm.c (make_tempdir, make_tempname): Free template on all
+ failure paths.
+
+ PR29254, memory leak in stab_demangle_v3_arg
+ PR 29254
+ * stabs.c (stab_demangle_v3_arg): Free dt on failure path.
+
+2022-06-17 Pedro Alves <pedro@palves.net>
+
+ Fix GDB build with GCC 4.8 & 4.9
+ With gcc 4.8/4.9, we run into this build failure (and other similar
+ ones):
+
+ /home/palves/gdb/binutils-gdb/src/gdb/location.h:224:59: error: could not convert ‘{0, LINE_OFFSET_UNKNOWN}’ from ‘<brace-enclosed initializer list>’ to ‘line_offset’
+ struct line_offset line_offset = {0, LINE_OFFSET_UNKNOWN};
+ ^
+
+ The issue is that at around the GCC 4.8/4.9 era, a default member
+ initializer prevented the struct from being an aggregate, so you
+ cannot use aggregate initialization on them. That rule changed after
+ GCC 4.9 and GCC 5 & later uses new rules.
+
+ Fix this by not using aggregate initialization for struct line_offset.
+ The default member initization already leaves line_offset as {0,
+ LINE_OFFSET_UNKNOWN}, so initialization to those values can just go
+ away. The remaining cases are of the form {0, LINE_OFFSET_NONE}, and
+ those cases can be better rewritten to delay setting the sign field
+ until we know we have a valid offset.
+
+ Change-Id: I0506ea4a83c5fa2f15e159569db68b3b0a7509b4
+
+2022-06-17 Pedro Alves <pedro@palves.net>
+
+ Convert set_location_spec_string to a method
+ This converts set_location_spec_string to a method of location_spec,
+ and makes the location_spec::as_string field protected, renaming it to
+ m_as_string along the way.
+
+ Change-Id: Iccfb1654e9fa7808d0512df89e775f9eacaeb9e0
+
+2022-06-17 Pedro Alves <pedro@palves.net>
+
+ Convert location_spec_to_string to a method
+ This converts location_spec_to_string to a method of location_spec,
+ simplifying the code using it, as it no longer has to use
+ std::unique_ptr::get().
+
+ Change-Id: I621bdad8ea084470a2724163f614578caf8f2dd5
+
+2022-06-17 Pedro Alves <pedro@palves.net>
+
+ Convert location_spec_type to a method
+ This converts location_spec_type to location_spec::type().
+
+ Change-Id: Iff4cbfafb1cf3d22adfa142ff939b4a148e52273
+
+2022-06-17 Pedro Alves <pedro@palves.net>
+
+ Convert location_spec_empty_p to a method
+ This converts location_spec_empty_p to a method of location_spec,
+ simplifying users, as they no longer have to use
+ std::unique_ptr::get().
+
+ Change-Id: I83381a729896f12e1c5a1b4d6d4c2eb1eb6582ff
+
+2022-06-17 Pedro Alves <pedro@palves.net>
+
+ Eliminate copy_location_spec
+ copy_location_spec is just a wrapper around location_spec::clone(), so
+ remove it and call clone() directly. This simplifies users, as they
+ no longer have to use std::unique_ptr::get().
+
+ Change-Id: I8ce8658589460b98888283b306b315a5b8f73976
+
+2022-06-17 Pedro Alves <pedro@palves.net>
+
+ Eliminate the two-level data structures behind location_specs
+ Currently, there's the location_spec hierarchy, and then some
+ location_spec subclasses have their own struct type holding all their
+ data fields.
+
+ I.e., there is this:
+
+ location_spec
+ explicit_location_spec
+ linespec_location_spec
+ address_location_spec
+ probe_location_spec
+
+ and then these separate types:
+
+ explicit_location
+ linespec_location
+
+ where:
+
+ explicit_location_spec
+ has-a explicit_location
+ linespec_location_spec
+ has-a linespec_location
+
+ This patch eliminates explicit_location and linespec_location,
+ inlining their members in the corresponding location_spec type.
+
+ The location_spec subclasses were the ones currently defined in
+ location.c, so they are moved to the header. Since the definitions of
+ the classes are now visible, we no longer need location_spec_deleter.
+
+ Some constructors that are used for cloning location_specs, like:
+
+ explicit explicit_location_spec (const struct explicit_location *loc)
+
+ ... were converted to proper copy ctors.
+
+ In the process, initialize_explicit_location is eliminated, and some
+ functions that returned the "data type behind a locspec", like
+ get_linespec_location are converted to downcast functions, like
+ as_linespec_location_spec.
+
+ Change-Id: Ia31ccef9382b25a52b00fa878c8df9b8cf2a6c5a
+
+2022-06-17 Pedro Alves <pedro@palves.net>
+
+ event_location -> location_spec
+ Currently, GDB internally uses the term "location" for both the
+ location specification the user input (linespec, explicit location, or
+ an address location), and for actual resolved locations, like the
+ breakpoint locations, or the result of decoding a location spec to
+ SaLs. This is expecially confusing in the breakpoints module, as
+ struct breakpoint has these two fields:
+
+ breakpoint::location;
+ breakpoint::loc;
+
+ "location" is the location spec, and "loc" is the resolved locations.
+
+ And then, we have a method called "locations()", which returns the
+ resolved locations as range...
+
+ The location spec type is presently called event_location:
+
+ /* Location we used to set the breakpoint. */
+ event_location_up location;
+
+ and it is described like this:
+
+ /* The base class for all an event locations used to set a stop event
+ in the inferior. */
+
+ struct event_location
+ {
+
+ and even that is incorrect... Location specs are used for finding
+ actual locations in the program in scenarios that have nothing to do
+ with stop events. E.g., "list" works with location specs.
+
+ To clean all this confusion up, this patch renames "event_location" to
+ "location_spec" throughout, and then all the variables that hold a
+ location spec, they are renamed to include "spec" in their name, like
+ e.g., "location" -> "locspec". Similarly, functions that work with
+ location specs, and currently have just "location" in their name are
+ renamed to include "spec" in their name too.
+
+ Change-Id: I5814124798aa2b2003e79496e78f95c74e5eddca
+
+2022-06-17 Vladimir Mezentsev <vladimir.mezentsev@oracle.com>
+
+ gprofng: fix build with -Werror=format-truncation
+ gprofng/ChangeLog
+ 2022-06-16 Vladimir Mezentsev <vladimir.mezentsev@oracle.com>
+
+ * configure.ac: Remove -Wno-format-truncation.
+ * src/Makefile.am: Likewise.
+ * configure: Rebuild.
+ * src/Makefile.in: Rebuild.
+ * common/hwctable.c: Fix -Werror=format-truncation errors.
+ * src/ipc.cc: Likewise.
+ * src/parse.cc: Likewise.
+
+2022-06-17 GDB Administrator <gdbadmin@sourceware.org>
+
+ Automatic date update in version.in
+
+2022-06-16 Tom de Vries <tdevries@suse.de>
+
+ [gdb/testsuite] Fix have_mpx test
+ When testing on openSUSE Leap 15.4 I ran into this FAIL:
+ ...
+ FAIL: gdb.arch/i386-mpx-map.exp: NULL address of the pointer
+ ...
+ and likewise for all the other mpx tests.
+
+ The problem is that have_mpx is supposed to return 0, but it doesn't because
+ it tries to match this output:
+ ...
+ builtin_spawn -ignore SIGHUP temp/20294/have_mpx-2-20294.x^M
+ No MPX support^M
+ No MPX support^M
+ ...
+ using:
+ ...
+ && ![string equal $output "No MPX support\r\n"]]
+ ...
+
+ Fix this by matching using a regexp instead.
+
+ Tested on x86_64-linux.
+
+2022-06-16 Alan Modra <amodra@gmail.com>
+
+ use of uninitialised value in input_file_open
+ Triggered by a file containing just "#N" or "#A". fgets when hitting
+ EOF before reading anything returns NULL and does not write to buf.
+ strchr (buf, '\n') then is reading from uninitialised memory.
+
+ * input-file.c (input_file_open): Don't assume buf contains
+ zero string terminator when fgets returns NULL.
+
+2022-06-16 Alan Modra <amodra@gmail.com>
+
+ Always free matching vector from bfd_check_format_matches
+ At least one place calling list_matching_formats failed to free the
+ "matching" vector from bfd_check_format_matches afterwards. Fix that
+ by calling free inside list_matching_formats.
+
+ binutils/
+ * bucomm.c (list_matching_formats): Free arg.
+ * addr2line.c (process_file): Adjust to suit.
+ * ar.c (open_inarch, ranlib_touch): Likewise.
+ * coffdump.c (main): Likewise.
+ * nm.c (display_archive, display_file): Likewise.
+ * objcopy.c (copy_file): Likewise.
+ * objdump.c (display_object_bfd): Likewise.
+ * size.c (display_bfd): Likewise.
+ * srconv.c (main): Likewise.
+ ld/
+ * ldlang.c (load_symbols): Free "matching".
+
+2022-06-16 Alan Modra <amodra@gmail.com>
+
+ Revert "Revert "Fix fbsd core matching""
+ This reverts commit 476288fa2bddecf0f0e13dee826a076309bf01fe.
+
+2022-06-16 Alan Modra <amodra@gmail.com>
+
+ Restore readelf -wF
+ Commit 94585d6d4495 resulted in readelf -wF failing with
+ Unrecognized debug letter option 'F'
+
+ binutils/
+ * dwarf.c (debug_dump_long_opts): Add letter.
+ (debug_option_table): New, replacing..
+ (opts_table, letter_table): ..these.
+ (dwarf_select_sections_by_names): Adjust to suit. Set
+ do_debug_frames outside of loop.
+ (dwarf_select_sections_by_letters): Similarly.
+ gas/
+ * testsuite/gas/i386/ehinterp.d: Use readelf -wF.
+
+2022-06-16 Alan Modra <amodra@gmail.com>
+
+ PR29250, readelf erases CIE initial register state
+ PR 29250
+ binutils/
+ * dwarf.c (display_debug_frames): Set col_type[reg] on sizing
+ pass over FDE to cie->col_type[reg] if CIE specifies reg.
+ Handle DW_CFA_restore and DW_CFA_restore_extended on second
+ pass using the same logic. Remove unnecessary casts. Don't
+ call frame_need_space on second pass over FDE.
+ gas/
+ * testsuite/gas/i386/ehinterp.d,
+ * testsuite/gas/i386/ehinterp.s: New test.
+ * testsuite/gas/i386/i386.exp: Run it.
+
+2022-06-16 GDB Administrator <gdbadmin@sourceware.org>
+
+ Automatic date update in version.in
+
+2022-06-15 Sergei Trofimovich <siarheit@google.com>
+
+ sim: fix BFD_VMA format arguments on 32-bit hosts [PR gdb/29184]
+ Noticed format mismatch when attempted to build gdb on i686-linux-gnu
+ in --enable-64-bit-bfd mode:
+
+ sim/../../sim/cris/sim-if.c:576:28:
+ error: format '%lx' expects argument of type 'long unsigned int',
+ but argument 4 has type 'bfd_size_type' {aka 'long long unsigned int'} [-Werror=format=]
+ 576 | sim_do_commandf (sd, "memory region 0x%" BFD_VMA_FMT "x,0x%lx",
+ | ^~~~~~~~~~~~~~~~~~~
+ 577 | interp_load_addr, interpsiz);
+ | ~~~~~~~~~
+ | |
+ | bfd_size_type {aka long long unsigned int}
+
+ While at it fixed format string for time-related types.
+
+2022-06-15 Tom Tromey <tromey@adacore.com>
+
+ Check for listeners in emit_exiting_event
+ I noticed that emit_exiting_event does not check whether there are any
+ listeners before creating the event object. All other event emitters
+ do this, so this patch updates this one as well.
+
+2022-06-15 Tom Tromey <tom@tromey.com>
+
+ Add to documentation of Python 'dont_repeat' method
+ PR python/28533 points out that the Python 'dont_repeat' documentation
+ is a bit ambiguous about when the method ought to be called. This
+ patch spells it out.
+
+2022-06-15 Yvan Roux <yvan.roux@foss.st.com>
+
+ gdb/arm: Make sp alias for one of the other stack pointers
+ For Cortex-M targets, SP register is never detached from msp or
+ psp, it always has the same value as one of them. Let GDB treat
+ ARM_SP_REGNUM as an alias similar to what is done in hardware.
+
+2022-06-15 Yvan Roux <yvan.roux@foss.st.com>
+
+ gdb/arm: Track msp and psp
+ For Arm Cortex-M33 with security extensions, there are 4 different
+ stack pointers (msp_s, msp_ns, psp_s, psp_ns). To be compatible
+ with earlier Cortex-M derivates, the msp and psp registers are
+ aliases for one of the 4 real stack pointer registers.
+
+ These are the combinations that exist:
+ sp -> msp -> msp_s
+ sp -> msp -> msp_ns
+ sp -> psp -> psp_s
+ sp -> psp -> psp_ns
+
+ This means that when the GDB client is to show the value of "msp",
+ the value should always be equal to either "msp_s" or "msp_ns".
+ Same goes for "psp".
+
+ To add a bit more context; GDB does not really use the register msp
+ (or psp) internally, but they are part of the set of registers which
+ are provided by the target.xml file. As a result, they will be part
+ of the set of registers printed by the "info r" command.
+
+ Without this particular patch, GDB will hit the assert in the bottom
+ of arm_cache_get_sp_register function.
+
+ Bug: https://sourceware.org/bugzilla/show_bug.cgi?id=29121
+
+2022-06-15 Yvan Roux <yvan.roux@foss.st.com>
+
+ gdb/arm: Fetch initial sp value prior to compare
+ For Arm Cortex-M33 with security extensions, there are 4 different
+ stack pointers (msp_s, msp_ns, psp_s, psp_ns). In order to
+ identify the active one, compare the values of the different
+ stacks. The value of the initial sp register needs to be fetched to
+ perform this comparison.
+
+2022-06-15 Andrew Burgess <aburgess@redhat.com>
+
+ gdb: unify two dis_asm_read_memory functions in disasm.c
+ After the recent restructuring of the disassembler code, GDB has ended
+ up with two identical class static functions, both called
+ dis_asm_read_memory, with identical implementations.
+
+ My first thought was to move these out of their respective classes,
+ and just make them global functions, then I'd only need a single
+ copy.
+
+ And maybe that's the right way to go. But I disliked that by doing
+ that I loose the encapsulation of the method with the corresponding
+ disassembler class.
+
+ So, instead, I placed the static method into its own class, and had
+ both the gdb_non_printing_memory_disassembler and gdb_disassembler
+ classes inherit from this new class as an additional base-class.
+
+ In terms of code generated, I don't think there's any significant
+ difference with this approach, but I think this better reflects how
+ the function is closely tied to the disassembler.
+
+ There should be no user visible changes after this commit.
+
+2022-06-15 Andrew Burgess <aburgess@redhat.com>
+
+ gdb: refactor the non-printing disassemblers
+ This commit started from an observation I made while working on some
+ other disassembler patches, that is, that the function
+ gdb_buffered_insn_length, is broken ... sort of.
+
+ I noticed that the gdb_buffered_insn_length function doesn't set up
+ the application data field if the disassemble_info structure.
+
+ Further, I noticed that some architectures, for example, ARM, require
+ that the application_data field be set, see gdb_print_insn_arm in
+ arm-tdep.c.
+
+ And so, if we ever use gdb_buffered_insn_length for ARM, then GDB will
+ likely crash. Which is why I said only "sort of" broken. Right now
+ we don't use gdb_buffered_insn_length with ARM, so maybe it isn't
+ broken yet?
+
+ Anyway to prove to myself that there was a problem here I extended the
+ disassembler self tests in disasm-selftests.c to include a test of
+ gdb_buffered_insn_length. As I run the test for all architectures, I
+ do indeed see GDB crash for ARM.
+
+ To fix this we need gdb_buffered_insn_length to create a disassembler
+ that inherits from gdb_disassemble_info, but we also need this new
+ disassembler to not print anything.
+
+ And so, I introduce a new gdb_non_printing_disassembler class, this is
+ a disassembler that doesn't print anything to the output stream.
+
+ I then observed that both ARC and S12Z also create non-printing
+ disassemblers, but these are slightly different. While the
+ disassembler in gdb_non_printing_disassembler reads the instruction
+ from a buffer, the ARC and S12Z disassemblers read from target memory
+ using target_read_code.
+
+ And so, I further split gdb_non_printing_disassembler into two
+ sub-classes, gdb_non_printing_memory_disassembler and
+ gdb_non_printing_buffer_disassembler.
+
+ The new selftests now pass, but otherwise, there should be no user
+ visible changes after this commit.
+
+2022-06-15 Andrew Burgess <andrew.burgess@embecosm.com>
+
+ gdb/python: implement the print_insn extension language hook
+ This commit extends the Python API to include disassembler support.
+
+ The motivation for this commit was to provide an API by which the user
+ could write Python scripts that would augment the output of the
+ disassembler.
+
+ To achieve this I have followed the model of the existing libopcodes
+ disassembler, that is, instructions are disassembled one by one. This
+ does restrict the type of things that it is possible to do from a
+ Python script, i.e. all additional output has to fit on a single line,
+ but this was all I needed, and creating something more complex would,
+ I think, require greater changes to how GDB's internal disassembler
+ operates.
+
+ The disassembler API is contained in the new gdb.disassembler module,
+ which defines the following classes:
+
+ DisassembleInfo
+
+ Similar to libopcodes disassemble_info structure, has read-only
+ properties: address, architecture, and progspace. And has methods:
+ __init__, read_memory, and is_valid.
+
+ Each time GDB wants an instruction disassembled, an instance of
+ this class is passed to a user written disassembler function, by
+ reading the properties, and calling the methods (and other support
+ methods in the gdb.disassembler module) the user can perform and
+ return the disassembly.
+
+ Disassembler
+
+ This is a base-class which user written disassemblers should
+ inherit from. This base class provides base implementations of
+ __init__ and __call__ which the user written disassembler should
+ override.
+
+ DisassemblerResult
+
+ This class can be used to hold the result of a call to the
+ disassembler, it's really just a wrapper around a string (the text
+ of the disassembled instruction) and a length (in bytes). The user
+ can return an instance of this class from Disassembler.__call__ to
+ represent the newly disassembled instruction.
+
+ The gdb.disassembler module also provides the following functions:
+
+ register_disassembler
+
+ This function registers an instance of a Disassembler sub-class
+ as a disassembler, either for one specific architecture, or, as a
+ global disassembler for all architectures.
+
+ builtin_disassemble
+
+ This provides access to GDB's builtin disassembler. A common
+ use case that I see is augmenting the existing disassembler output.
+ The user code can call this function to have GDB disassemble the
+ instruction in the normal way. The user gets back a
+ DisassemblerResult object, which they can then read in order to
+ augment the disassembler output in any way they wish.
+
+ This function also provides a mechanism to intercept the
+ disassemblers reads of memory, thus the user can adjust what GDB
+ sees when it is disassembling.
+
+ The included documentation provides a more detailed description of the
+ API.
+
+ There is also a new CLI command added:
+
+ maint info python-disassemblers
+
+ This command is defined in the Python gdb.disassemblers module, and
+ can be used to list the currently registered Python disassemblers.
+
+2022-06-15 Andrew Burgess <andrew.burgess@embecosm.com>
+
+ gdb: add extension language print_insn hook
+ This commit is setup for the next commit.
+
+ In the next commit I will add a Python API to intercept the print_insn
+ calls within GDB, each print_insn call is responsible for
+ disassembling, and printing one instruction. After the next commit it
+ will be possible for a user to write Python code that either wraps
+ around the existing disassembler, or even, in extreme situations,
+ entirely replaces the existing disassembler.
+
+ This commit does not add any new Python API.
+
+ What this commit does is put the extension language framework in place
+ for a print_insn hook. There's a new callback added to 'struct
+ extension_language_ops', which is then filled in with nullptr for Python
+ and Guile.
+
+ Finally, in the disassembler, the code is restructured so that the new
+ extension language function ext_lang_print_insn is called before we
+ delegate to gdbarch_print_insn.
+
+ After this, the next commit can focus entirely on providing a Python
+ implementation of the new print_insn callback.
+
+ There should be no user visible change after this commit.
+
+2022-06-15 Andrew Burgess <andrew.burgess@embecosm.com>
+
+ gdb: add new base class to gdb_disassembler
+ The motivation for this change is an upcoming Python disassembler API
+ that I would like to add. As part of that change I need to create a
+ new disassembler like class that contains a disassemble_info and a
+ gdbarch. The management of these two objects is identical to how we
+ manage these objects within gdb_disassembler, so it might be tempting
+ for my new class to inherit from gdb_disassembler.
+
+ The problem however, is that gdb_disassembler has a tight connection
+ between its constructor, and its print_insn method. In the
+ constructor the ui_file* that is passed in is replaced with a member
+ variable string_file*, and then in print_insn, the contents of the
+ member variable string_file are printed to the original ui_file*.
+
+ What this means is that the gdb_disassembler class has a tight
+ coupling between its constructor and print_insn; the class just isn't
+ intended to be used in a situation where print_insn is not going to be
+ called, which is how my (upcoming) sub-class would need to operate.
+
+ My solution then, is to separate out the management of the
+ disassemble_info and gdbarch into a new gdb_disassemble_info class,
+ and make this class a parent of gdb_disassembler.
+
+ In arm-tdep.c and mips-tdep.c, where we used to cast the
+ disassemble_info->application_data to a gdb_disassembler, we can now
+ cast to a gdb_disassemble_info as we only need to access the gdbarch
+ information.
+
+ Now, my new Python disassembler sub-class will still want to print
+ things to an output stream, and so we will want access to the
+ dis_asm_fprintf functionality for printing.
+
+ However, rather than move this printing code into the
+ gdb_disassemble_info base class, I have added yet another level of
+ hierarchy, a gdb_printing_disassembler, thus the class structure is
+ now:
+
+ struct gdb_disassemble_info {};
+ struct gdb_printing_disassembler : public gdb_disassemble_info {};
+ struct gdb_disassembler : public gdb_printing_disassembler {};
+
+ In a later commit my new Python disassembler will inherit from
+ gdb_printing_disassembler.
+
+ The reason for adding the additional layer to the class hierarchy is
+ that in yet another commit I intend to rewrite the function
+ gdb_buffered_insn_length, and to do this I will be creating yet more
+ disassembler like classes, however, these will not print anything,
+ thus I will add a gdb_non_printing_disassembler class that also
+ inherits from gdb_disassemble_info. Knowing that that change is
+ coming, I've gone with the above class hierarchy now.
+
+ There should be no user visible changes after this commit.
+
+2022-06-15 Andrew Burgess <aburgess@redhat.com>
+
+ gdb/python: convert gdbpy_err_fetch to use gdbpy_ref
+ Convert the gdbpy_err_fetch class to make use of gdbpy_ref, this
+ removes the need for manual reference count management, and allows the
+ destructor to be removed.
+
+ There should be no functional change after this commit.
+
+ I think this cleanup is worth doing on its own, however, in a later
+ commit I will want to copy instances of gdbpy_err_fetch, and switching
+ to using gdbpy_ref means that I can rely on the default copy
+ constructor, without having to add one that handles the reference
+ counts, so this is good preparation for that upcoming change.
+
+2022-06-15 Jan Beulich <jbeulich@suse.com>
+
+ x86: drop print_operand_value()'s "hex" parameter
+ For quite some time all callers have been passing 1 / true. While there
+ fold the final oappend_with_style() calls.
+
+2022-06-15 Tom de Vries <tdevries@suse.de>
+
+ [gdb/build] Fix build for gcc < 11
+ When building trunk on openSUSE Leap 15.3 with system gcc 7.5.0, I run into:
+ ...
+ In file included from ../bfd/bfd.h:46:0,
+ from gdb/defs.h:37,
+ from gdb/debuginfod-support.c:19:
+ gdb/debuginfod-support.c: In function ‘bool debuginfod_is_enabled()’:
+ gdb/../include/diagnostics.h:42:3: error: unknown option after \
+ ‘#pragma GCC diagnostic’ kind [-Werror=pragmas]
+ _Pragma (DIAGNOSTIC_STRINGIFY (GCC diagnostic ignored option))
+ ^
+ gdb/../include/diagnostics.h:80:3: note: in expansion of macro \
+ ‘DIAGNOSTIC_IGNORE’
+ DIAGNOSTIC_IGNORE ("-Wstringop-overread")
+ ^~~~~~~~~~~~~~~~~
+ gdb/debuginfod-support.c:201:4: note: in expansion of macro \
+ ‘DIAGNOSTIC_IGNORE_STRINGOP_OVERREAD’
+ DIAGNOSTIC_IGNORE_STRINGOP_OVERREAD
+ ^
+ ...
+
+ The problem is that the warning -Wstringop-overread has been introduced for
+ gcc 11, and we can only tell gcc to ignore if it knows about it.
+
+ Fix this by guarding the DIAGNOSTIC_IGNORE_STRINGOP_OVERREAD definition in
+ diagnostics.c with '#if __GNUC__ >= 11'.
+
+ Tested on x86_64-linux, by completing a build.
+
+2022-06-15 Alan Modra <amodra@gmail.com>
+
+ PR29230, segv in lookup_symbol_in_variable_table
+ The PR23230 testcase uses indexed strings without specifying
+ SW_AT_str_offsets_base. In this case we left u.str with garbage (from
+ u.val) which then led to a segfault when attempting to access the
+ string. Fix that by clearing u.str. The patch also adds missing
+ sanity checks in the recently committed read_indexed_address and
+ read_indexed_string functions.
+
+ PR 29230
+ * dwarf2.c (read_indexed_address): Return uint64_t. Sanity check idx.
+ (read_indexed_string): Use uint64_t for str_offset. Sanity check idx.
+ (read_attribute_value): Clear u.str for indexed string forms when
+ DW_AT_str_offsets_base is not yet read or missing.
+
+2022-06-15 Mark Wielaard <mark@klomp.org>
+
+ gdb: Always suppress stringop-overread warning in debuginfod-support.c
+ Just like on s390x with g++ 11.2.1 and ppc64le with g++ 11.3.1 g++ 11
+ on hppa produces a spurious warning for stringop-overread in
+ debuginfod_is_enabled for url_view. Just always suppress it on all
+ arches.
+
+ https://sourceware.org/bugzilla/show_bug.cgi?id=29198
+
+ gdb/ChangeLog:
+
+ * debuginfod-support.c (debuginfod_is_enabled): Always use
+ DIAGNOSTIC_IGNORE_STRINGOP_OVERREAD.
+
+2022-06-15 GDB Administrator <gdbadmin@sourceware.org>
+
+ Automatic date update in version.in
+
+2022-06-14 Vladimir Mezentsev <vladimir.mezentsev@oracle.com>
+
+ gprofng docs: provide help for <rate> == <interval>
+ The help message from 'gprofng collect app -h', in
+ the section on <rate> == <interval>, had a dangling
+ reference to a non-existent manpage. Provide basic
+ info, including reasons for caution.
+
+ gprofng docs: mention HTML / PDF in the gprofng README
+ The HTML and PDF formats are described in the gprofng tutorial (info
+ topic "Other Document Formats"). In addition, describe them in the
+ README because: they are important; they are easily searchable; and the
+ README is primarily oriented to the person who is installing gprofng,
+ who may differ from the person who follows a user tutorial.
+
+2022-06-14 Vladimir Mezentsev <vladimir.mezentsev@oracle.com>
+
+ gprofng: fix build with -Werror=format-security
+ gprofng/ChangeLog
+ 2022-06-13 Vladimir Mezentsev <vladimir.mezentsev@oracle.com>
+
+ PR gprofng/28968
+ * src/src/Hist_data.cc (print_row): Make param const.
+ * src/src/Hist_data.h (print_row): Likewise.
+ * src/src/Print.h: Remove unused functions and variables.
+ * src/Print.cc: Fix -Werror=format-security errors.
+ * src/parse.cc: Likewise.
+
+2022-06-14 Tom de Vries <tdevries@suse.de>
+
+ [gdb/testsuite] Handle unordered dict in gdb.python/py-mi-cmd.exp
+ When running test-case gdb.python/py-mi-cmd.exp on openSUSE Leap 42.3 with
+ python 3.4, I occasionally run into:
+ ...
+ Expecting: ^(-pycmd dct[^M
+ ]+)?(\^done,result={hello="world",times="42"}[^M
+ ]+[(]gdb[)] ^M
+ [ ]*)
+ -pycmd dct^M
+ ^done,result={times="42",hello="world"}^M
+ (gdb) ^M
+ FAIL: gdb.python/py-mi-cmd.exp: -pycmd dct (unexpected output)
+ ...
+
+ The problem is that the data type used here in py-mi-cmd.py:
+ ...
+ elif argv[0] == "dct":
+ return {"result": {"hello": "world", "times": 42}}
+ ...
+ is a dictionary, and only starting version 3.6 are dictionaries insertion
+ ordered, so using PyDict_Next in serialize_mi_result doesn't guarantee a
+ fixed order.
+
+ Fix this by allowing the alternative order.
+
+ Tested on x86_64-linux.
+
+2022-06-14 Tom Tromey <tromey@adacore.com>
+
+ Implement lazy FPU initialization for ravenscar
+ Some ravenscar runtimes implement lazy FPU handling. On these
+ runtimes, the FPU is only initialized when a task tries to use it.
+ Furthermore, the FP registers aren't automatically saved on a task
+ switch -- instead, the save is deferred until the new task tries to
+ use the FPU. Furthermore, each task's context area has a flag
+ indicating whether the FPU has been initialized for this task.
+
+ This patch teaches GDB to understand this implementation. When
+ fetching or storing registers, GDB now checks to see whether the live
+ FP registers should be used. If not, the task's saved FP registers
+ will be used if the task has caused FPU initialization.
+
+ Currently only AArch64 uses this code. bb-runtimes implements this
+ for ARM as well, but GDB doesn't yet have an arm-ravenscar-thread.c.
+
+2022-06-14 Tom Tromey <tromey@adacore.com>
+
+ Reimplement ravenscar registers using tables
+ Currently, the ravenscar-thread implementation for each architecture
+ is written by hand. However, these are actually written by
+ copy-paste. It seems better to switch to a table-driven approach.
+
+ The previous code also fetched all registers whenever any register was
+ requested. This is corrected in the new implementation.
+
+2022-06-14 Tom Tromey <tromey@adacore.com>
+
+ Fix bugs in aarch64-ravenscar-thread.c
+ We found a few bugs in aarch64-ravenscar-thread.c.
+
+ First, some of the register offsets were incorrect. The "bb-runtimes"
+ file for this runtime had the wrong offsets in comments, which GDB
+ took to be correct. However, those comments didn't account for
+ alignment. This patch adjusts the offsets.
+
+ Next, the "FPU Saved field" is not a register -- it is an
+ implementation detail of the runtime. This is removed.
+
+ Finally, I think the FP registers are actually named V0-V31, and the
+ "Q" names are pseudo-registers. This patch fixes the comment.
+
+2022-06-14 Tom Tromey <tromey@adacore.com>
+
+ Allow 'interrupt -a' in all-stop mode
+ PR gdb/17160 points out that "interrupt -a" errors in all-stop mode,
+ but there's no good reason for this. This patch removes the error.
+
+ Bug: https://sourceware.org/bugzilla/show_bug.cgi?id=17160
+
+2022-06-14 Youling Tang <tangyouling@loongson.cn>
+
+ gdbserver: Add LoongArch/Linux support
+ Implement LoongArch/Linux support, including XML target description
+ handling based on features determined, GPR regset support, and software
+ breakpoint handling.
+
+ In the Linux kernel code of LoongArch, ptrace implements PTRACE_POKEUSR
+ and PTRACE_PEEKUSR in the arch_ptrace function, so srv_linux_usrregs is
+ set to yes.
+
+ With this patch on LoongArch:
+
+ $ make check-gdb TESTS="gdb.server/server-connect.exp"
+ [...]
+ # of expected passes 18
+ [...]
+
+2022-06-14 Tom de Vries <tdevries@suse.de>
+
+ Revert "Fix fbsd core matching"
+ This reverts commit a7e29f797cecd5a2f73c27838b09eae1f1b6c657.
+
+ I accidentally pushed this, so revert.
+
+2022-06-14 Tom de Vries <tdevries@suse.de>
+
+ [gdb/testsuite] Fix regexp in gdb.ada/mi_var_access.exp
+ With gcc-12 and target board unix/-m32, we run into:
+ ...
+ (gdb) ^M
+ Expecting: ^(-var-create A_String_Access \* A_String_Access[^M
+ ]+)?(\^done,name="A_String_Access",numchild="1",.*[^M
+ ]+[(]gdb[)] ^M
+ [ ]*)
+ -var-create A_String_Access * A_String_Access^M
+ ^error,msg="Value out of range."^M
+ (gdb) ^M
+ FAIL: gdb.ada/mi_var_access.exp: Create varobj (unexpected output)
+ ...
+
+ What happens is easier to understand if we take things out of the mi context:
+ ...
+ $ gdb -q -batch \
+ outputs/gdb.ada/mi_var_access/mi_access \
+ -ex "b mi_access.adb:19" \
+ -ex run \
+ -ex "p A_String_Access"
+ ...
+ Breakpoint 1, mi_access () at mi_access.adb:19
+ 19 A_String : String (3 .. 5) := "345"; -- STOP
+ $1 = (pck.string_access) <error reading variable: Value out of range.>
+ ...
+ while with target board unix we have instead:
+ ...
+ $1 = (pck.string_access) 0x431b40 <ada_main.sec_default_sized_stacks>
+ ...
+
+ The var-create command samples the value of the variable at a location where
+ the variable is not yet initialized, and with target board unix we
+ accidentally hit a valid address, but with target board unix/-m32 that's not
+ the case.
+
+ Fix the FAIL by accepting the error message.
+
+ Bug: https://sourceware.org/bugzilla/show_bug.cgi?id=28464
+
+2022-06-14 Alan Modra <amodra@gmail.com>
+
+ Fix fbsd core matching
+ On Thu, Jun 09, 2022 at 08:59:37AM -0700, John Baldwin wrote:
+ > On 6/9/22 1:58 AM, Tom de Vries via Gdb-patches wrote:
+ > > Hi,
+ > >
+ > > With an --enable-targets=all build and target board unix/-m32 I run into a
+ > > FAIL in test-case gdb.base/corefile.exp:
+ > > ...
+ > > (gdb) file outputs/gdb.base/corefile/corefile^M
+ > > Reading symbols from outputs/gdb.base/corefile/corefile...^M
+ > > (gdb) core-file outputs/gdb.base/corefile/corefile.core^M
+ > > warning: core file may not match specified executable file.^M
+ > > [New LWP 12011]^M
+ > > Core was generated by `outputs/gdb.base/corefile/co'.^M
+ > > Program terminated with signal SIGABRT, Aborted.^M
+ > > (gdb) FAIL: gdb.base/corefile.exp: core-file warning-free
+ > > ...
+ > >
+ > > The warning is there because of this mismatch between core and exec:
+ > > ...
+ > > (gdb) p core_bfd->xvec
+ > > $3 = (const struct bfd_target *) 0x20112a0 <i386_elf32_fbsd_vec>
+ > > (gdb) p exec_bfd->xvec
+ > > $4 = (const struct bfd_target *) 0x2010b00 <i386_elf32_vec>
+ > > ...
+ > >
+ > > In the exec case, the detected architecture is i386_elf32_vec because this bit
+ > > of code in elfcode.h:elf_object_p():
+ > > ...
+ > > if (ebd->elf_machine_code != EM_NONE
+ > > && i_ehdrp->e_ident[EI_OSABI] != ebd->elf_osabi
+ > > && ebd->elf_osabi != ELFOSABI_NONE)
+ > > goto got_wrong_format_error;
+ > > ...
+ > > prevents i386_elf32_fbsd from matching.
+ > >
+ > > Fix the core matching by copying that code to elfcore.h:elf_core_file_p().
+ > >
+ > > Tested on x86_64-linux.
+ > >
+ > > Bug: https://sourceware.org/bugzilla/show_bug.cgi?id=29227
+ > >
+ > > Any comments?
+
+ Looks good.
+
+ > Looking at elfcore.h, it seems to have not gotten changes made to elfcode.h over
+ > time and is a bit rotted. I suspect that all of changes made in commit 0aabe54e6222
+ > that added these lines in elfcode.h (along with several other changes) need to
+ > be applied to this function in elfcore.h, not just adding these lines.
+
+ Yes, the commit 0aabe54e6222 changes likely should go in too. I'm a
+ little wary of adding all the sanity checks to elf_core_file_p since
+ that might result in some core files not being recognised at all. For
+ example, despite the FIXME I'd guess leaving out the EI_VERSION check
+ was deliberate. The following seems reasonable to me. Please test.
+
+2022-06-14 Kavitha Natarajan <kavitha.natarajan@amd.com>
+
+ Debug support for global alias variable
+ Starting with (future) Clang 15 (since
+ https://reviews.llvm.org/D120989), Clang emits the DWARF information
+ of global alias variables as DW_TAG_imported_declaration. However,
+ GDB does not handle it. It incorrectly always reads this tag as
+ C++/Fortran imported declaration (type alias, namespace alias and
+ Fortran module). This commit adds support to handle this tag as an
+ alias variable.
+
+ This change fixes the failures in the gdb.base/symbol-alias.exp
+ testcase with current git Clang. This testcase is also updated to
+ test nested (recursive) aliases.
+
+2022-06-14 Alan Modra <amodra@gmail.com>
+
+ BFD_RELOC_MIPS_16
+ MIPS should not be using BFD_RELOC_16 for its R_MIPS_16 relocation,
+ since R_MIPS_16 specifies a 16-bit field in a 32-bit word.
+ BFD_RELOC_16, emitted by generic code to handle fixups on 16-bit data
+ directives, expects fixups to operate on the whole of a 16-bit word.
+
+ This patch corrects the problem by using BFD_RELOC_MIPS_16, a new bfd
+ reloc that is used to generate R_MIPS_16. BFD_RELOC_16 is handled in
+ md_apply_fix for cases where the fixup can be applied at assembly
+ time. Like BFD_RELOC_8, BFD_RELOC_16 now has no corresponding object
+ file relocation, and thus .half, .hword, .short and .dc.w must be
+ resolved at assembly time. BFD_RELOC_MIPS_REL16 is removed by this
+ patch since it isn't used.
+
+ PR 3243
+ PR 26542
+ * reloc.c (BFD_RELOC_MIPS_16): Rename from BFD_RELOC_MIPS_REL16.
+ * elf32-mips.c (mips_reloc_map): Map BFD_RELOC_MIPS_16 to R_MIPS_16.
+ * elf64-mips.c (mips_reloc_map): Likewise, delete BFD_RELOC_MIPS_REL16.
+ * elfn32-mips.c (mips_reloc_map): Likewise.
+ * libbfd.h: Regenerate.
+ * bfd-in2.h: Regenerate.
+ gas/
+ * config/tc-mips.c (append_insn): Handle BFD_RELOC_MIPS_16.
+ (macro_build): Likewise.
+ (mips_percent_op <%half>): Generate BFD_RELOC_MIPS_16.
+ (md_apply_fix): Handle BFD_RELOC_16 and BFD_RELOC_MIPS_16 when fx_done.
+ ld/
+ * testsuite/ld-mips-elf/reloc-local-overflow.d,
+ * testsuite/ld-mips-elf/reloc-local-overflow.s: Rewrite.
+
+2022-06-14 Alan Modra <amodra@gmail.com>
+
+ Correct R_MIPS_16 n32 howto
+ If the howto is actually used, an all-zero dst_mask will result in
+ unchanged section contents on attempting to apply R_MIPS_16.
+
+ * elfn32-mips.c (elf_mips_howto_table_rela <R_MIPS_16>): Correct
+ dst_mask.
+
+2022-06-14 Alan Modra <amodra@gmail.com>
+
+ asan: applying zero offset to NULL pointer
+ * dwarf.c (fetch_indexed_string): Move initialisation of "curr"
+ and "end" after checking for missing section.
+
+2022-06-14 Alan Modra <amodra@gmail.com>
+
+ gas dwarf2dbg.c tidy
+ Make it a little more obvious that remap_debug_filename returns an
+ allocated string (that should be freed) by returning a char * rather
+ than const char *. Free a few missed cases in dwarf2dbg.c, and free
+ other memory allocated in dwarf2dbg.c. Also remove static
+ initialisation of variables and initialise in dwarf2_init instead,
+ in order to ensure gas state is saner for oss-fuzz.
+
+ * remap.c (remap_debug_filename): Remove const from return.
+ * as.h (remap_debug_filename): Update prototype.
+ * config/obj-elf.c (obj_elf_ident): Simplify free of
+ remap_debug_filename output.
+ * stabs.c (stabs_generate_asm_file): Likewise.
+ * dwarf2dbg.c (dirs, dirs_in_use, dirs_allocated, current): Don't
+ initialise statically..
+ (dwarf2_init): ..do so here, along with most other static vars.
+ (assign_file_to_slot): Don't set files_allocated until we
+ succeed in allocating memory.
+ (purge_generated_debug): Add bool param, free more stuff if true.
+ (dwarf2_directive_filename): Adjust purge_generated_debug call.
+ (process_entries): Don't free line_entry here..
+ (dwarf2_cleanup): ..do so here instead, new function.
+ (dwarf2_finish): Call dwarf2_cleanup. When chaining together
+ subseg line entries, unhook entries from old subseg list.
+ (dwarf2_directive_loc): Free remap_debug_filename string.
+ (out_dir_and_file_list): Likewise.
+ (out_debug_str): Likewise.
+
+2022-06-14 GDB Administrator <gdbadmin@sourceware.org>
+
+ Automatic date update in version.in
+
+2022-06-13 Tom de Vries <tdevries@suse.de>
+
+ [gdb/testsuite] Fix gdb.reverse/test_ioctl_TCSETSW.exp with libc debuginfo
+ When running test-case gdb.reverse/test_ioctl_TCSETSW.exp with glibc debuginfo
+ installed, I run into:
+ ...
+ (gdb) PASS: gdb.reverse/test_ioctl_TCSETSW.exp: at TCSETSW call
+ step^M
+ __tcsetattr (fd=0, optional_actions=1, termios_p=0x7fffffffcf50) at \
+ ../sysdeps/unix/sysv/linux/tcsetattr.c:45^M
+ 45 {^M
+ (gdb) FAIL: gdb.reverse/test_ioctl_TCSETSW.exp: handle TCSETSW
+ ...
+
+ The problem is that the step is expected to step over the call to tcsetattr,
+ but due to glibc debuginfo being installed, we step into the call.
+
+ Fix this by using next instead of step.
+
+ Tested on x86_64-linux.
+
+2022-06-13 Tom de Vries <tdevries@suse.de>
+
+ [gdb] Avoid warnings in cooked_{read,write}_test for m68hc11
+ With --enable-targets=all we have:
+ ...
+ $ gdb -q -batch -ex "maint selftest"
+ ...
+ Running selftest regcache::cooked_read_test::m68hc11.
+ warning: No frame soft register found in the symbol table.
+ Stack backtrace will not work.
+ Running selftest regcache::cooked_read_test::m68hc12.
+ warning: No frame soft register found in the symbol table.
+ Stack backtrace will not work.
+ Running selftest regcache::cooked_read_test::m68hc12:HCS12.
+ warning: No frame soft register found in the symbol table.
+ Stack backtrace will not work.
+ ...
+
+ Likewise for regcache::cooked_write_test.
+
+ The warning has no use in the selftest context.
+
+ Fix this by skipping the specific selftests.
+
+ Tested on x86_64-linux.
+
+ Bug: https://sourceware.org/bugzilla/show_bug.cgi?id=29224
+
+2022-06-13 Tiezhu Yang <yangtiezhu@loongson.cn>
+
+ gdb: LoongArch: Deal with atomic sequence
+ We can't put a breakpoint in the middle of a ll/sc atomic sequence,
+ so look for the end of the sequence and put the breakpoint there.
+
+2022-06-13 Sam James <sam@gentoo.org>
+
+ gdb: don't use bashism in configure test
+ Results in configure output like:
+ ```
+ checking for X... no
+ /var/tmp/portage/sys-devel/gdb-12.1/work/gdb-12.1/gdb/configure: 18837: test: yes: unexpected operator
+ checking whether to use babeltrace... auto
+ ```
+
+ ... when /bin/sh is provided by a POSIX-compliant shell, like dash,
+ instead of bash.
+
+2022-06-13 Jiangshuai Li <jiangshuai_li@c-sky.com>
+
+ gdb:csky add support target-descriptions for CSKY arch
+ Registers in CSKY architecture included:
+ 1. 32 gprs
+ 2. 16 ars (alternative gprs used for quick interrupt)
+ 3. hi, lo, pc
+ 4. fr0~fr31, fcsr, fid, fesr
+ 5. vr0~vr15
+ 6. ((32 banks) * 32) cr regs (max 32 banks, 32 control regs a bank)
+
+ For register names:
+ Except over control registers, other registers, like gprs, hi, lo ...
+ are fixed names. Among the 32*32 control registers, some used registers
+ will have fixed names, others will have a default name "cpxcry". 'x'
+ refers to bank, y refers index in the bank(a control register in bank
+ 4 with index 14 will has a default name cp4cr14).
+
+ For register numbers in GDB:
+ We assign a fixed number to each register in GDB, like:
+ r0~r31 with 0~31
+ hi, lo with 36, 37
+ fpu/vpu with 40~71
+ ...
+ described in function csky_get_supported_register_by_index().
+
+ Function csky_get_supported_tdesc_registers_count():
+ To calculate the total number of registers that GDB can analyze,
+ including those with fixed names and those with default register names.
+
+ Function csky_get_supported_register_by_index():
+ To find a supported struct csky_supported_tdesc_register, return a
+ struct include name with regnum via index.
+
+ Arrays csky_supported_tdesc_feature_names[]:
+ Include all supported feature names in tdesc-xmls.
+
+ We use the information described above to load the register description
+ file of the target from the stub. When loading, do a little check that
+ whether the register description file contains SP, LR and PC.
+
+2022-06-13 Tom de Vries <tdevries@suse.de>
+
+ [gdb/testsuite] Handle quotes in gdb_py_module_available
+ On openSUSE Leap 42.3 with python 3.4, I run into:
+ ...
+ (gdb) python import pygments^M
+ Traceback (most recent call last):^M
+ File "<string>", line 1, in <module>^M
+ ImportError: No module named 'pygments'^M
+ Error while executing Python code.^M
+ (gdb) FAIL: gdb.base/style.exp: python import pygments
+ ERROR: unexpected output from python import
+ ...
+ because gdb_py_module_available doesn't handle the single quotes around the
+ module name in the ImportError.
+
+ Fix this by allowing the single quotes.
+
+ Tested on x86_64-linux.
+
+2022-06-13 Jan Beulich <jbeulich@suse.com>
+
+ x86: fix incorrect indirection
+ Commit 384e201e5aec ("x86: properly initialize struct instr_info
+ instance(s)") was based on an improperly refreshed patch. Correct the
+ oversight.
+
+2022-06-13 Jan Beulich <jbeulich@suse.com>
+
+ x86: replace global scratch buffer
+ With its movement to the stack, and with the subsequent desire to
+ initialize the entire instr_info instances, this has become doubly
+ inefficient. Individual users have better knowledge of how big a buffer
+ they need, and in a number of cases going through an intermediate buffer
+ can be avoided altogether.
+
+ Having got confirmation that it wasn't intentional to print memory
+ operand displacements with inconsistent style, print_displacement() is
+ now using dis_style_address_offset consistently (eliminating the need
+ for callers to pass in a style).
+
+ While touching print_operand_value() also convert its "hex" parameter to
+ bool. And while altering (and moving) oappend_immediate(), fold
+ oappend_maybe_intel_with_style() into its only remaining caller. Finally
+ where doing adjustments, use snprintf() in favor of sprintf().
+
+2022-06-13 Jan Beulich <jbeulich@suse.com>
+
+ x86: avoid string copy when swapping Vex.W controlled operands
+ Now that op_out[] is an array of pointers, there's no need anymore to
+ copy strings. Simply swap the pointers.
+
+2022-06-13 Jan Beulich <jbeulich@suse.com>
+
+ x86: shrink prefix related disassembler state fields
+ By changing the values used for "artificial" prefix values,
+ all_prefixes[] can be shrunk to array of unsigned char. All that
+ additionally needs adjusting is the printing of possible apparently
+ standalone prefixes when recovering from longjmp(): Simply check
+ whether any prefixes were successfully decoded, to avoid converting
+ opcode bytes matching the "artificial" values to prefix mnemonics.
+
+ Similarly by re-arranging the bits assigned to PREFIX_* mask values
+ we can fit all segment register masks in a byte and hence shrink
+ active_seg_prefix to unsigned char.
+
+ Somewhat similarly with last_*_prefix representing offsets into the
+ opcode being disassembled, signed char is sufficient to hold all possible
+ values.
+
+2022-06-13 Jan Beulich <jbeulich@suse.com>
+
+ x86: properly initialize struct instr_info instance(s)
+ Commit 39fb369834a3 ("opcodes: Make i386-dis.c thread-safe") introduced
+ a lot of uninitialized data. Alan has in particular observed ubsan
+ taking issue with the loop inverting the order of operands, where
+ op_riprel[] - an array of bool - can hold values other than 0 or 1.
+
+ Move instantiation of struct instr_info into print_insn() (thus having
+ just a single central point), and make use of C99 dedicated initializers
+ to fill fields right in the initializer where possible. This way all
+ fields not explicitly initialized will be zero-filled, which in turn
+ allows dropping of some other explicit initialization later in the
+ function or in ckprefix(). Additionally this removes a lot of
+ indirection, as all "ins->info" uses can simply become "info".
+
+ Make one further arrangement though, to limit the amount of data needing
+ (zero)initializing on every invocation: Convert the op_out structure
+ member to just an array of pointers, with the actual arrays living
+ inside print_insn() (and, as befoe, having just their 1st char filled
+ with nul).
+
+ While there, instead of adjusting print_insn()'s forward declaration,
+ arrange for no such declaration to be needed in the first place.
+
+2022-06-13 GDB Administrator <gdbadmin@sourceware.org>
+
+ Automatic date update in version.in
+
+2022-06-12 Tom Tromey <tom@tromey.com>
+
+ Fix self-test failure in addrmap
+ Mark pointed out that my recent addrmap C++-ficiation changes caused a
+ regression in the self-tests. This patch fixes the problem by
+ updating this test not to allocate the mutable addrmap on an obstack.
+
+ Remove psymtab_addrmap
+ While working on addrmaps, I noticed that psymtab_addrmap is no longer
+ needed now. It was introduced in ancient times as an optimization for
+ DWARF, but no other symbol reader was ever updated to use it. Now
+ that DWARF does not use psymtabs, it can be deleted.
+
+ Use malloc for mutable addrmaps
+ Mutable addrmaps currently require an obstack. This was probably done
+ to avoid having to call splay_tree_delete, but examination of the code
+ shows that all mutable obstacks have a limited lifetime -- now it's
+ simple to treat them as ordinary C++ objects, in some cases
+ stack-allocating them, and have a destructor to make the needed call.
+ This patch implements this change.
+
+ Remove addrmap::create_fixed
+ addrmap::create_fixed is just a simple wrapper for 'new', so remove it
+ in favor of uses of 'new'.
+
+ Remove addrmap_create_mutable
+ This removes addrmap_create_mutable in favor of using 'new' at the
+ spots where the addrmap is created.
+
+ Remove addrmap wrapper functions
+ This removes the various addrmap wrapper functions in favor of simple
+ method calls on the objects themselves.
+
+ Move addrmap classes to addrmap.h
+ This moves the addrmap class definitions to addrmap.h. This is safe
+ to do now that the contents are private.
+
+ Privacy for addrmap_mutable
+ This changes addrmap_mutable so that its data members are private.
+
+ Privacy for addrmap_fixed
+ This changes addrmap_fixed so that its data members are private.
+ It also makes struct addrmap_transition private as well.
+
+ Use inheritance for addrmap
+ This is a simply C++-ification of the basics of addrmap: it uses
+ virtual methods rather than a table of function pointers, and it
+ changes the concrete implementations to be subclasses.
+
+2022-06-12 Jon Turney <jon.turney@dronecode.org.uk>
+
+ Trivial fixes to Cygwin build after 8fea1a81
+ * Remove a stray semicolon
+ * Restore dropped nullptr program argument in use of create_process() under CYGWIN
+
+ Simplify __USEWIDE
+ Prior to c6ca3dab dropping support for Cygwin 1.5, __USEWIDE was not
+ defined for Cygwin 1.5. After that, it's always defined if __CYGWIN__
+ is, so remove __USEWIDE conditionals inside __CYGWIN__ conditionals.
+
+ Simplify cygwin_buf_t
+ Prior to c6ca3dab dropping support for Cygwin 1.5, cygwin_buf_t was
+ defined as char for Cygwin 1.5. After that, it's always wchar_t, so
+ just use that.
+
+2022-06-12 GDB Administrator <gdbadmin@sourceware.org>
+
+ Automatic date update in version.in
+
+2022-06-11 GDB Administrator <gdbadmin@sourceware.org>
+
+ Automatic date update in version.in
+
+2022-06-10 Tom Tromey <tom@tromey.com>
+
+ Fix warning-avoidance initialization in xcoffread.c
+ With the registry rewrite series, on Fedora 34, I started seeing this
+ error in xcoffread.c:
+
+ ../../binutils-gdb/gdb/xcoffread.c: In function ‘void read_xcoff_symtab(objfile*, legacy_psymtab*)’:
+ ../../binutils-gdb/gdb/xcoffread.c:948:25: error: ‘main_aux’ is used uninitialized [-Werror=uninitialized]
+ 948 | union internal_auxent fcn_aux_saved = main_aux;
+ | ^~~~~~~~~~~~~
+ ../../binutils-gdb/gdb/xcoffread.c:933:25: note: ‘main_aux’ declared here
+ 933 | union internal_auxent main_aux;
+ | ^~~~~~~~
+
+ I don't know why this error started suddenly... that seems weird,
+ because it's not obviously related to the changes I made.
+
+ Looking into it, it seems this line was intended to avoid a similar
+ warning -- but since 'main_aux' is uninitialized at the point where it
+ is used, this fix was incomplete.
+
+ This patch avoids the warning by initializing using "{}". I'm
+ checking this in.
+
+2022-06-10 Carl Love <cel@us.ibm.com>
+
+ Fix comparison of unsigned long int to int in record_linux_system_call.
+ The if statement in case gdb_sys_ioctl in function
+ record_linux_system_call in file gdb/linux-record.c is as follows:
+
+ if (tmpulongest == tdep->ioctl_FIOCLEX
+ || tmpulongest == tdep->ioctl_FIONCLEX
+ ....
+ || tmpulongest == tdep->ioctl_TCSETSW
+ ...
+ }
+
+ The PowerPC ioctl value for ioctl_TCSETW is 0x802c7415. The variable
+ ioctl_TCSETW is defined in gdb/linux-record.h as an int. The TCSETW value
+ has the MSB set to one so it is a negative integer. The comparison of the
+ unsigned long value tmpulongest to a negative integer value for
+ ioctl_TCSETSW fails.
+
+ This patch changes the declarations for the ioctl_* values in struct
+ linux_record_tdep to unsigned long to fix the comparisons between
+ tmpulongest and the tdep->ioctl_* values.
+
+ An additional test gdb.reverse/test_ioctl_TCSETSW.exp is added to verify
+ the gdb record_linux_system_call() if statement for the ioctl TCSETSW
+ succeeds.
+
+ This patch has been tested on Power 10 and Intel with no test failures.
+
+2022-06-10 Carl Love <cel@us.ibm.com>
+
+ PowerPC, correct the gdb ioctl values for TCGETS, TCSETS, TCSETSW and TCSETSF.
+ Some of the ioctl numbers are based on the size of kernel termios structure.
+ Currently the PowerPC GDB definitions are "hard coded" into the ioctl
+ number.
+
+ The current PowerPC values for TCGETS, TCSETS, TCSETSW and TCSETSF are
+ defined in gdb/ppc-linux-tdep.c as:
+
+ record_tdep->ioctl_TCGETS = 0x403c7413;
+ record_tdep->ioctl_TCSETS = 0x803c7414;
+ record_tdep->ioctl_TCSETSW = 0x803c7415;
+ record_tdep->ioctl_TCSETSF = 0x803c7416;
+
+ Where the termios structure size is in hex digits [5:4] as 0x3c.
+
+ The definition for the PowerPC termios structure is given in:
+ arch/powerpc/include/uapi/asm/termbits.h
+
+ The size of the termios data structure in this file is 0x2c not 0x3c.
+
+ This patch changes the hex digits for the size of the PowerPC termios size
+ in the ioctl values for TCGETS, TCSETS, TCSETSW and TCSETSF to 0x2c.
+ This patch also changes the hard coding to generate the number based on a
+ it easier to update the ioctl numbers.
+
+2022-06-10 Andrew Burgess <aburgess@redhat.com>
+
+ gdb/testsuite: remove definition of true/false from gdb_compiler_info
+ Since pretty much forever the get_compiler_info function has included
+ these lines:
+
+ # Most compilers will evaluate comparisons and other boolean
+ # operations to 0 or 1.
+ uplevel \#0 { set true 1 }
+ uplevel \#0 { set false 0 }
+
+ These define global variables true (to 1) and false (to 0).
+
+ It seems odd to me that these globals are defined in
+ get_compiler_info, I guess maybe the original thinking was that if a
+ compiler had different true/false values then we would detect it there
+ and define true/false differently.
+
+ I don't think we should be bundling this logic into get_compiler_info,
+ it seems weird to me that in order to use $true/$false a user needs to
+ first call get_compiler_info.
+
+ It would be better I think if each test script that wants these
+ variables just defined them itself, if in the future we did need
+ different true/false values based on compiler version then we'd just
+ do:
+
+ if { [test_compiler_info "some_pattern"] } {
+ # Defined true/false one way...
+ } else {
+ # Defined true/false another way...
+ }
+
+ But given the current true/false definitions have been in place since
+ at least 1999, I suspect this will not be needed any time soon.
+
+ Given that the definitions of true/false are so simple, right now my
+ suggestion is just to define them in each test script that wants
+ them (there's not that many). If we ever did need more complex logic
+ then we can always add a function in gdb.exp that sets up these
+ globals, but that seems overkill for now.
+
+ There should be no change in what is tested after this commit.
+
+2022-06-10 Luis Machado <luis.machado@arm.com>
+
+ Document the ARM_CC_FOR_TARGET testsuite variable
+ This variable is useful when exercising AArch64 multi-arch support (debugging
+ 32-bit AArch32 executables).
+
+ Unfortunately it isn't well documented. This patch adds information about it
+ and explains how to use it.
+
+2022-06-10 Tom de Vries <tdevries@suse.de>
+
+ [gdb/testsuite] Fix XPASS with gcc-12 in gdb.base/vla-struct-fields.exp
+ With gcc-12, I get for test-case gdb.base/vla-struct-fields.exp:
+ ...
+ (gdb) print inner_vla_struct_object_size == sizeof(inner_vla_struct_object)^M
+ $7 = 1^M
+ (gdb) XPASS: gdb.base/vla-struct-fields.exp: size of inner_vla_struct_object
+ ...
+
+ Fix this by limiting the xfailing to gcc-11 and earlier. Also, limit the
+ xfailing to the equality test.
+
+ Tested on x86_64-linux.
+
+2022-06-10 Tom de Vries <tdevries@suse.de>
+
+ [gdb/testsuite] Fix timeout in gdb.ada/ghost.exp
+ On openSUSE Tumbleweed with gcc-12, I run into a timeout:
+ ...
+ (gdb) print value^M
+ Multiple matches for value^M
+ [0] cancel^M
+ [1] ada.strings.maps.value (<ref> ada.strings.maps.character_mapping; \
+ character) return character at a-strmap.adb:599^M
+ [2] pck.value at src/gdb/testsuite/gdb.ada/ghost/pck.ads:17^M
+ [3] system.object_reader.value (<ref> system.object_reader.object_symbol) \
+ return system.object_reader.uint64 at s-objrea.adb:2279^M
+ [4] system.traceback.symbolic.value (system.address) return string at \
+ s-trasym.adb:200^M
+ > FAIL: gdb.ada/ghost.exp: print value (timeout)
+ print ghost_value^M
+ Argument must be choice number^M
+ (gdb) FAIL: gdb.ada/ghost.exp: print ghost_value
+ ...
+
+ Fix this by prefixing value (as well as the other printed values) with the
+ package name:
+ ...
+ (gdb) print pck.value^M
+ ...
+
+ Tested on x86_64-linux.
+
+ Bug: https://sourceware.org/bugzilla/show_bug.cgi?id=29055
+
+2022-06-10 GDB Administrator <gdbadmin@sourceware.org>
+
+ Automatic date update in version.in
+
+2022-06-09 Tom Tromey <tromey@adacore.com>
+
+ Minor fix to Python breakpoint event documentation
+ I noticed that the Python event documentation referred to the event's
+ "breakpoint" field as a function, whereas it is actually an attribute.
+ This patch fixes the error.
+
+2022-06-09 Andrew Burgess <aburgess@redhat.com>
+
+ gdb/aarch64: fix 32-bit arm compatibility
+ GDB's ability to run 32-bit ARM processes on an AArch64 native target
+ is currently broken. The test gdb.multi/multi-arch.exp currently
+ fails with a timeout.
+
+ The cause of these problems is the following three functions:
+
+ aarch64_linux_nat_target::thread_architecture
+ aarch64_linux_nat_target::fetch_registers
+ aarch64_linux_nat_target::store_registers
+
+ What has happened, over time, is that these functions have been
+ modified, forgetting that any particular thread (running on the native
+ target) might be an ARM thread, or might be an AArch64 thread.
+
+ The problems always start with a line similar to this:
+
+ aarch64_gdbarch_tdep *tdep
+ = (aarch64_gdbarch_tdep *) gdbarch_tdep (inf->gdbarch);
+
+ The problem with this line is that if 'inf->gdbarch' is an ARM
+ architecture, then gdbarch_tdep will return a pointer to an
+ arm_gdbarch_tdep object, not an aarch64_gdbarch_tdep object. The
+ result of the above cast will, as a consequence, be undefined.
+
+ In aarch64_linux_nat_target::thread_architecture, after the undefined
+ cast we then proceed to make use of TDEP, like this:
+
+ if (vq == tdep->vq)
+ return inf->gdbarch;
+
+ Obviously at this point the result is undefined, but, if this check
+ returns false we then proceed with this code:
+
+ struct gdbarch_info info;
+ info.bfd_arch_info = bfd_lookup_arch (bfd_arch_aarch64, bfd_mach_aarch64);
+ info.id = (int *) (vq == 0 ? -1 : vq);
+ return gdbarch_find_by_info (info);
+
+ As a consequence we will return an AArch64 gdbarch object for our ARM
+ thread! Things go downhill from there on.
+
+ There are similar problems, with similar undefined behaviour, in the
+ fetch_registers and store_registers functions.
+
+ The solution is to make use of a check like this:
+
+ if (gdbarch_bfd_arch_info (inf->gdbarch)->bits_per_word == 32)
+
+ If the word size is 32 then we know we have an ARM architecture. We
+ just need to make sure that we perform this check before trying to
+ read the tdep field.
+
+ In aarch64_linux_nat_target::thread_architecture a little reordering,
+ and the addition of the above check allows us to easily avoid the
+ undefined behaviour.
+
+ For fetch_registers and store_registers I made the decision to split
+ each of the functions into two new helper functions, and so
+ aarch64_linux_nat_target::fetch_registers now calls to either
+ aarch64_fetch_registers or aarch32_fetch_registers, and there's a
+ similar change for store_registers.
+
+ One thing I had to decide was whether to place the new aarch32_*
+ functions into the aarch32-linux-nat.c file. In the end I decided to
+ NOT place the functions there, but instead leave them in
+ aarch64-linux-nat.c, my reasoning was this:
+
+ The existing functions in that file are shared from arm-linux-nat.c
+ and aarch64-linux-nat.c, this generic code to support 32-bit ARM
+ debugging from either native target.
+
+ In contrast, the two new aarch32 functions I have added _only_ make
+ sense when debugging on an AArch64 native target. These function
+ shouldn't be called from arm-linux-nat.c at all, and so, if we places
+ the functions into aarch32-linux-nat.c, the functions would be built
+ into a 32-bit ARM GDB, but never used.
+
+ With that said, there's no technical reason why they couldn't go in
+ aarch32-linux-nat.c, so if that is preferred I'm happy to move them.
+
+ After this commit the gdb.multi/multi-arch.exp passes.
+
+2022-06-09 Yvan Roux <yvan.roux@foss.st.com>
+
+ gdb/arm: Document and fix exception stack offsets
+ Add a description of exception entry context stacking and fix next
+ frame offset (at 0xA8 relative to R0 location) as well as FPU
+ registers ones (starting at 0x68 relative to R0).
+
+ gdb/arm: Simplify logic for updating addresses
+ Small performance improvement by fetching previous SP value only
+ once before the loop and reuse it to avoid fetching at every
+ iteration.
+
+2022-06-09 Pedro Alves <pedro@palves.net>
+
+ Fix ARM_CC_FOR_TARGET handling
+ The previous patch that introduced the arm_cc_for_target procedure
+ moved the ARM_CC_FOR_TARGET global check to that procedure, but forgot
+ to tell tcl that ARM_CC_FOR_TARGET is a global. As a result,
+ specifying ARM_CC_FOR_TARGET on the command line actually does
+ nothing. This fixes it.
+
+ Change-Id: I4e33b7633fa665e2f7b8f8c9592a949d74a19153
+
+2022-06-09 Yvan Roux <yvan.roux@foss.st.com>
+
+ gdb/arm: Terminate unwinding when LR is 0xffffffff
+ ARMv7-M Architecture Reference "A2.3.1 Arm core registers" states
+ that LR is set to 0xffffffff on reset.
+
+ ARMv8-M Architecture Reference "B3.3 Registers" states that LR is set
+ to 0xffffffff on warm reset if Main Extension is implemented,
+ otherwise the value is unknown.
+
+2022-06-09 Andrew Burgess <aburgess@redhat.com>
+
+ gdb/testsuite: solve problems with compiler_info caching
+ After this commit:
+
+ commit 44d469c5f85a4243462b8966722dafa62b602bf5
+ Date: Tue May 31 16:43:44 2022 +0200
+
+ gdb/testsuite: add Fortran compiler identification to GDB
+
+ Some regressions were noticed:
+
+ https://sourceware.org/pipermail/gdb-patches/2022-May/189673.html
+
+ The problem is associated with how compiler_info variable is cached
+ between calls to get_compiler_info.
+
+ Even before the above commit, get_compiler_info supported two
+ language, C and C++. Calling get_compiler_info would set the global
+ compiler_info based on the language passed as an argument to
+ get_compiler_info, and, in theory, compiler_info would not be updated
+ for the rest of the dejagnu run.
+
+ This obviously is slightly broken behaviour. If the first call to
+ get_compiler_info was for the C++ language then compiler_info would be
+ set based on the C++ compiler in use, while if the first call to
+ get_compiler_info was for the C language then compiler_info would be
+ set based on the C compiler.
+
+ This probably wasn't very noticable, assuming a GCC based test
+ environment then in most cases the C and C++ compiler would be the
+ same version.
+
+ However, if the user starting playing with CC_FOR_TARGET or
+ CXX_FOR_TARGET, then they might not get the behaviour they expect.
+
+ Except, to make matters worse, most of the time, the user probably
+ would get the behaviour they expected .... except when they didn't!
+ I'll explain:
+
+ In gdb.exp we try to avoid global variables leaking between test
+ scripts, this is done with the help of the two procs
+ gdb_setup_known_globals and gdb_cleanup_globals. All known globals
+ are recorded before a test script starts, and then, when the test
+ script ends, any new globals are deleted.
+
+ Normally, compiler_info is only set as a result of a test script
+ calling get_compiler_info or test_compiler_info. This means that the
+ compiler_info global will not exist when the test script starts, but
+ will exist when the test script end, and so, the compiler_info
+ variable is deleted at the end of each test.
+
+ This means that, in reality, the compiler_info is recalculated once
+ for each test script, hence, if a test script just checks on the C
+ compiler, or just checks on the C++ compiler, then compiler_info will
+ be correct and the user will get the behaviour they expect.
+
+ However, if a single test script tries to check both the C and C++
+ compiler versions then this will not work (even before the above
+ commit).
+
+ The situation is made worse be the behaviour or the load_lib proc.
+ This proc (provided by dejagnu) will only load each library once.
+ This means that if a library defines a global, then this global would
+ normally be deleted at the end of the first test script that includes
+ the library.
+
+ As future attempts to load the library will not actually reload it,
+ then the global will not be redefined and would be missing for later
+ test scripts that also tried to load that library.
+
+ To work around this issue we override load_lib in gdb.exp, this new
+ version adds all globals from the newly loaded library to the list of
+ globals that should be preserved (not deleted).
+
+ And this is where things get interesting for us. The library
+ trace-support.exp includes calls, at the file scope, to things like
+ is_amd64_regs_target, which cause get_compiler_info to be called.
+ This means that after loading the library the compiler_info global is
+ defined.
+
+ Our override of load_lib then decides that this new global has to be
+ preserved, and adds it to the gdb_persistent_globals array.
+
+ From that point on compiler_info will never be recomputed!
+
+ This commit addresses all the caching problems by doing the following:
+
+ Change the compiler_info global into compiler_info_cache global. This
+ new global is an array, the keys of this array will be each of the
+ supported languages, and the values will be the compiler version for
+ that language.
+
+ Now, when we call get_compiler_info, if the compiler information for
+ the specific language has not been computed, then we do that, and add
+ it to the cache.
+
+ Next, compiler_info_cache is defined by calling
+ gdb_persistent_global. This automatically adds the global to the list
+ of persistent globals. Now the cache will not be deleted at the end
+ of each test script.
+
+ This means that, for a single test run, we will compute the compiler
+ version just once for each language, this result will then be cached
+ between test scripts.
+
+ Finally, the legacy 'gcc_compiled' flag is now only set when we call
+ get_compiler_info with the language 'c'. Without making this change
+ the value of 'gcc_compiled' would change each time a new language is
+ passed to get_compiler_info. If the last language was e.g. Fortran,
+ then gcc_compiled might be left false.
+
+2022-06-09 Andrew Burgess <aburgess@redhat.com>
+
+ gdb/testsuite: handle errors better in test_compiler_info
+ Now that get_compiler_info might actually fail (if the language is not
+ handled), then we should try to handle this failure better in
+ test_compiler_info.
+
+ After this commit, if get_compiler_info fails then we will return a
+ suitable result depending on how the user called test_compiler_info.
+
+ If the user does something like:
+
+ set version [test_compiler_info "" "unknown-language"]
+
+ Then test_compiler_info will return an empty string. My assumption is
+ that the user will be trying to match 'version' against something, and
+ the empty string hopefully will not match.
+
+ If the user does something like:
+
+ if { [test_compiler_info "some_pattern" "unknown-language"] } {
+ ....
+ }
+
+ Then test_compiler_info will return false which seems the obvious
+ choice.
+
+ There should be no change in the test results after this commit.
+
+2022-06-09 Andrew Burgess <aburgess@redhat.com>
+
+ gdb/testsuite: make 'c' default language for get/test compiler info
+ This commit is a minor cleanup for the two functions (in gdb.exp)
+ get_compiler_info and test_compiler_info.
+
+ Instead of using the empty string as the default language, and just
+ "knowing" that this means the C language. Make this explicit. The
+ language argument now defaults to "c" if not specified, and the if
+ chain in get_compiler_info that checks the language not explicitly
+ handles "c" and gives an error for unknown languages.
+
+ This is a good thing, now that the API appears to take a language, if
+ somebody does:
+
+ test_compiler_info "xxxx" "rust"
+
+ to check the version of the rust compiler then we will now give an
+ error rather than just using the C compiler and leaving the user
+ having to figure out why they are not getting the results they
+ expect.
+
+ After a little grepping, I think the only place we were explicitly
+ passing the empty string to either get_compiler_info or
+ test_compiler_info was in gdb_compile_shlib_1, this is now changed to
+ pass "c" as the default language.
+
+ There should be no changes to the test results after this commit.
+
+2022-06-09 Andrew Burgess <aburgess@redhat.com>
+
+ gdb/testsuite: remove get_compiler_info calls from gdb.exp and dwarf.exp
+ We don't need to call get_compiler_info before calling
+ test_compiler_info; test_compiler_info includes a call to
+ get_compiler_info.
+
+ This commit cleans up lib/gdb.exp and lib/dwarf.exp a little by
+ removing some unneeded calls to get_compiler_info. We could do the
+ same cleanup throughout the testsuite, but I'm leaving that for
+ another day.
+
+ There should be no change in the test results after this commit.
+
+2022-06-09 Nils-Christian Kempke <nils-christian.kempke@intel.com>
+
+ gdb/testsuite: use test_compiler_info in gcc_major_version
+ The procedure gcc_major_version was earlier using the global variable
+ compiler_info to retrieve gcc's major version. This is discouraged and
+ (as can be read in a comment in compiler.c) compiler_info should be
+ local to get_compiler_info and test_compiler_info.
+
+ The preferred way of getting the compiler string is via calling
+ test_compiler_info without arguments. Gcc_major_version was changed to
+ do that.
+
+2022-06-09 Yvan Roux <yvan.roux@foss.st.com>
+
+ gdb: add Yvan Roux to gdb/MAINTAINERS
+
+2022-06-09 Andrew Burgess <aburgess@redhat.com>
+
+ gdb/testsuite: resolve duplicate test names in gdb.threads/tls.exp
+ While running the gdb.threads/tls.exp test with a GDB configured
+ without Python, I noticed some duplicate test names.
+
+ This is caused by a call to skip_python_tests that is within a proc
+ that is called multiple times by the test script. Each call to
+ skip_python_tests results in a call to 'unsupported', and this causes
+ the duplicate test names.
+
+ After this commit we now call skip_python_tests just once and place
+ the result into a variable. Now, instead of calling skip_python_tests
+ multiple times, we just check the variable.
+
+ There should be no change in what is tested after this commit.
+
+2022-06-09 Andrew Burgess <aburgess@redhat.com>
+
+ gdb/testsuite: resolve duplicate test name in gnu_vector.exp
+ While testing on AArch64 I spotted a duplicate test name in the
+ gdb.base/gnu_vector.exp test.
+
+ This commit adds a 'with_test_prefix' to resolve the duplicate.
+
+ While I was in the area I updated a 'gdb_test_multiple' call to make
+ use of $gdb_test_name.
+
+ There should be no change in what is tested after this commit.
+
+2022-06-09 GDB Administrator <gdbadmin@sourceware.org>
+
+ Automatic date update in version.in
+
+2022-06-08 Andrew Burgess <aburgess@redhat.com>
+
+ gdb: make throw_perror_with_name static
+ The throw_perror_with_name function is not used outside of utils.c
+ right now. And as perror_with_name is just a wrapper around
+ throw_perror_with_name, then any future calls would be to
+ perror_with_name.
+
+ Lets make throw_perror_with_name static.
+
+ There should be no user visible changes after this commit.
+
+2022-06-08 Andrew Burgess <aburgess@redhat.com>
+
+ gdb: remove trailing '.' from perror_with_name calls
+ I ran into this error while working on AArch64 GDB:
+
+ Unable to fetch VFP registers.: Invalid argument.
+
+ Notice the '.:' in the middle of this error message.
+
+ This is because of this call in aarch64-linux-nat.c:
+
+ perror_with_name (_("Unable to fetch VFP registers."));
+
+ The perror_with_name function take a string, and adds ': <message>' to
+ the end the string, so I don't think the string that we pass to
+ perror_with_name should end in '.'.
+
+ This commit removes all of the trailing '.' characters from
+ perror_with_name calls, which give more readable error messages.
+
+ I don't believe that any of these errors are tested in the
+ testsuite (after a little grepping).
+
+2022-06-08 Tom Tromey <tom@tromey.com>
+
+ Move CU queue to dwarf2_per_objfile
+ The CU queue is a member of dwarf2_per_bfd, but it is only used when
+ expanding CUs. Also, the dwarf2_per_objfile destructor checks the
+ queue -- however, if the per-BFD object is destroyed first, this will
+ not work. This was pointed out Lancelot as fallout from the patch to
+ rewrite the registry system.
+
+ This patch avoids this problem by moving the queue to the per-objfile
+ object.
+
+2022-06-08 Tom Tromey <tom@tromey.com>
+
+ Change allocation of m_dwarf2_cus
+ m_dwarf2_cus manually manages the 'dwarf2_cu' pointers it owns. This
+ patch simplifies the code by changing it to use unique_ptr.
+
+2022-06-08 Andrew Burgess <aburgess@redhat.com>
+
+ libopcodes: extend the styling within the i386 disassembler
+ The i386 disassembler is pretty complex. Most disassembly is done
+ indirectly; operands are built into buffers within a struct instr_info
+ instance, before finally being printed later in the disassembly
+ process.
+
+ Sometimes the operand buffers are built in a different order to the
+ order in which they will eventually be printed.
+
+ Each operand can contain multiple components, e.g. multiple registers,
+ immediates, other textual elements (commas, brackets, etc).
+
+ When looking for how to apply styling I guess the ideal solution would
+ be to move away from the operands being a single string that is built
+ up, and instead have each operand be a list of "parts", where each
+ part is some text and a style. Then, when we eventually print the
+ operand we would loop over the parts and print each part with the
+ correct style.
+
+ But it feels like a huge amount of work to move from where we are
+ now to that potentially ideal solution. Plus, the above solution
+ would be pretty complex.
+
+ So, instead I propose a .... different solution here, one that works
+ with the existing infrastructure.
+
+ As each operand is built up, piece be piece, we pass through style
+ information. This style information is then encoded into the operand
+ buffer (see below for details). After this the code can continue to
+ operate as it does right now in order to manage the set of operand
+ buffers.
+
+ Then, as each operand is printed we can split the operand buffer into
+ chunks at the style marker boundaries, with each chunk being printed
+ with the correct style.
+
+ For encoding the style information I use a single character, currently
+ \002, followed by the style encoded as a single hex digit, followed
+ again by the \002 character.
+
+ This of course relies on there not being more than 16 styles, but that
+ is currently true, and hopefully will remain true for the foreseeable
+ future.
+
+ The other major concern that has arisen around this work is whether
+ the escape character could ever be encountered in output naturally
+ generated by the disassembler. If this did happen then the escape
+ characters would be stripped from the output, and the wrong styling
+ would be applied.
+
+ However, I don't believe that this is currently a problem.
+ Disassembler content comes from a number of sources. First there's
+ content that copied directly from the i386-dis.c file, this is things
+ like register names, and other syntax elements (brackets, commas,
+ etc). We can easily check that the i386-dis.c file doesn't contain
+ our special character.
+
+ The next source of content are immediate operands. The text for these
+ operands is generated by calls into libc. By selecting a
+ non-printable character we can be confident that this is not something
+ that libc will generate as part of an immediate representation.
+
+ The other output that appears to be from the disassembler is operands
+ that contain addresses and (possibly) symbol names. It is quite
+ possible that a symbol name might contain any special character we
+ could imagine, so is this a problem?
+
+ I don't think it is, we don't actually print address and symbol
+ operands through the disassembler, instead, the disassembler calls
+ back to the user (objdump, gdb, etc) to print the address and symbol
+ on its behalf. This content is printed directly to the output stream,
+ it does not pass through the i386 disassembler output buffers. As a
+ result, we never check this particular output for styling escape
+ characters.
+
+ In some (not very scientific) benchmarking on my machine,
+ disassembling a reasonably large (142M) shared library, I'm not seeing
+ any significant slow down in disassembler speed with this change.
+
+ Most instructions are now being fully syntax highlighted when I
+ disassemble using the --disassembler-color=extended-color option. I'm
+ sure that there are probably still a few corner cases that need fixing
+ up, but we can come back to them later I think.
+
+ When disassembler syntax highlighting is not being used, then there
+ should be no user visible changes after this commit.
+
+2022-06-08 Carl Love <cel@us.ibm.com>
+
+ Fix gdb.arch/powerpc-power7.exp isel disassembly output.
+ The following commit changes the output format for the isel instruction on
+ PowerPC.
+
+ commit dd4832bf3efc1bd1797a6b9188260692b8b0db52 Introduces error in test
+ Author: Dmitry Selyutin <ghostmansd@gmail.com>
+ Date: Tue May 24 13:46:35 2022 +0000
+
+ opcodes: introduce BC field; fix isel
+
+ Per Power ISA Version 3.1B 3.3.12, isel uses BC field rather than CRB
+ field present in binutils sources. Also, per 1.6.2, BC has the same
+ semantics as BA and BB fields, so this should keep the same flags and
+ mask, only with the different offset.
+
+ opcodes/
+ * ppc-opc.c
+ (BC): Define new field, with the same definition as CRB field,
+ but with the PPC_OPERAND_CR_BIT flag present.
+ gas/
+ * testsuite/gas/ppc/476.d: Update.
+ * testsuite/gas/ppc/a2.d: Update.
+ * testsuite/gas/ppc/e500.d: Update.
+ * testsuite/gas/ppc/power7.d: Update.
+ <snip>
+ --- a/gas/testsuite/gas/ppc/476.d
+ +++ b/gas/testsuite/gas/ppc/476.d
+ @@ -209,7 +209,7 @@ Disassembly of section \.text:
+ .*: (7c 20 07 8c|8c 07 20 7c) ici 1
+ .*: (7c 03 27 cc|cc 27 03 7c) icread r3,r4
+ .*: (50 83 65 36|36 65 83 50) rlwimi r3,r4,12,20,27
+ -.*: (7c 43 27 1e|1e 27 43 7c) isel r2,r3,r4,28
+ +.*: (7c 43 27 1e|1e 27 43 7c) isel r2,r3,r4,4\*cr7\+lt
+
+ The above change breaks the gdb regression test gdb.arch/powerpc-power7.exp
+ on Power 7, Power 8, Power 9 and Power 10.
+
+ This patch updates the regression test gdb.arch/powerpc-power7.exp with
+ the new expected output for the isel instruction.
+
+ The patch has been tested on Power 7 and Power 10 to verify the patch fixes
+ the test.
+
+2022-06-08 Pedro Alves <pedro@palves.net>
+
+ aarch64: Add fallback if ARM_CC_FOR_TARGET not set
+ On Aarch64, you can set ARM_CC_FOR_TARGET to point to the 32-bit
+ compiler to use when testing gdb.multi/multi-arch.exp and
+ gdb.multi/multi-arch-exec.exp. If you don't set it, then those
+ testcases don't run.
+
+ I guess that approximately nobody remembers to set ARM_CC_FOR_TARGET.
+
+ This commit adds a fallback. If ARM_CC_FOR_TARGET is not set, and
+ testing for Linux, try arm-linux-gnueabi-gcc,
+ arm-none-linux-gnueabi-gcc, arm-linux-gnueabihf-gcc as 32-bit
+ compilers, making sure that the produced executable runs on the target
+ machine before claiming that the compiler produces useful executables.
+
+ Change-Id: Iefe5865d5fc84b4032eaff7f4c5c61582bf75c39
+
+2022-06-08 Alan Modra <amodra@gmail.com>
+
+ Don't encode reloc.size
+ I expect the encoded reloc.size field originally came from aout
+ r_length ecoding, but somehow went wrong for 64-bit relocs (which
+ should have been encoded as 3). Toss all that out, just use a byte
+ size instead. The changes outside of reloc.c in this patch should
+ make the code independent of how reloc.size is encoded.
+
+ * reloc.c (struct reloc_howto_struct): Increase size field by
+ one bit. Comment.
+ (HOWTO_RSIZE): Don't encode size.
+ (bfd_get_reloc_size): Adjust, and make it an inline function.
+ (read_reloc, write_reloc): Adjust.
+ * bfd-in2.h: Regenerate.
+ * aout-ns32k.c: Include libbfd.h.
+ (put_reloc): Don't use howto->size directly. Calculate r_length
+ using bfd_log2 and bfd_get_reloc_size.
+ * aoutx.h (swap_std_reloc_out): Likewise.
+ (aout_link_reloc_link_order): Likewise.
+ * i386lynx.c (swap_std_reloc_out
+ * mach-o-i386.c (bfd_mach_o_i386_swap_reloc_out
+ * pdp11.c (aout_link_reloc_link_order
+ * coff-arm.c (coff_arm_reloc): Don't use howto->size directly,
+ use bfd_get_reloc_size instead and adjust switch cases.
+ * coff-i386.c (coff_i386_reloc): Similarly.
+ * coff-x86_64.c (coff_amd64_reloc): Likewise.
+ * cpu-ns32k.c (do_ns32k_reloc): Likewise.
+ * elf32-arc.c (arc_do_relocation): Likewise.
+ * elf32-arm.c (elf32_arm_final_link_relocate): Likewise.
+ * elf32-bfin.c (bfin_bfd_reloc): Likewise.
+ * elf32-cr16.c (cr16_elf_final_link_relocate): Likewise.
+ * elf32-cris.c (cris_elf_pcrel_reloc): Likewise.
+ * elf32-crx.c (crx_elf_final_link_relocate): Likewise.
+ * elf32-csky.c (csky_elf_relocate_section): Likewise.
+ * elf32-d10v.c (extract_rel_addend, insert_rel_addend): Likewise.
+ * elf32-i386.c (elf_i386_relocate_section): Likewise.
+ * elf32-m32r.c (m32r_elf_generic_reloc): Likewise.
+ * elf32-nds32.c (nds32_elf_generic_reloc): Likewise.
+ * syms.c (_bfd_stab_section_find_nearest_line): Likewise.
+ * coff-rs6000.c (xcoff_ppc_relocate_section): Adjust howto.size.
+ * coff64-rs6000.c (xcoff64_ppc_relocate_section): Likewise.
+
+2022-06-08 Alan Modra <amodra@gmail.com>
+
+ bfin reloc offset checks
+ These all ought to use bfd_reloc_offset_in_range. In particular, replace
+ the check using howto->size + 1u.
+
+ * elf32-bfin.c (bfin_pcrel24_reloc): Use bfd_reloc_offset_in_range.
+ (bfin_imm16_reloc, bfin_byte4_reloc, bfin_bfd_reloc),
+ (bfin_final_link_relocate): Likewise.
+
+2022-06-08 Alan Modra <amodra@gmail.com>
+
+ Revert reloc howto nits
+ The "HOWTO size encoding" patch put 1 as the HOWTO size arg for
+ numerous howtos that are unused, describe dynamic relocs, are markers,
+ or otherwise are special purpose reloc howtos that don't care about
+ the size. The idea was to ensure no howto changed by inspecting
+ object files. Revert those changes, making them zero size.
+
+ * coff-alpha.c: Give special purpose reloc howtos a size of zero.
+ * coff-mcore.c, * elf-hppa.h, * elf-m10300.c, * elf32-arm.c,
+ * elf32-csky.c, * elf32-m32c.c, * elf32-m68k.c, * elf32-mep.c,
+ * elf32-mips.c, * elf32-ppc.c, * elf32-rx.c, * elf32-s390.c,
+ * elf32-spu.c, * elf32-tic6x.c, * elf32-tilepro.c, *elf32-vax.c,
+ * elf32-xtensa.c, * elf64-alpha.c, * elf64-mips.c,
+ * elf64-mmix.c, * elf64-ppc.c, * elf64-s390.c, * elfn32-mips.c,
+ * elfxx-loongarch.c, * elfxx-riscv.c, * elfxx-sparc.c,
+ * elfxx-tilegx.c, * som.c, * vms-alpha.c: Likewise.
+
+2022-06-08 Alan Modra <amodra@gmail.com>
+
+ HOWTO size encoding
+ This changes the HOWTO macro to encode the howto.size field from a
+ value given in bytes. This of course requires editing all target
+ uses of HOWTO, a major pain, but makes it a little nicer to specify
+ new target HOWTOs. Object files before/after this patch are
+ unchanged in .data and .rodata.
+
+ bfd/
+ * reloc.c (HOWTO_RSIZE): Encode size in bytes.
+ (EMPTY_HOWTO): Adjust to keep it all zero.
+ * aout-ns32k.c, * aoutx.h, * coff-alpha.c, * coff-arm.c,
+ * coff-i386.c, * coff-mcore.c, * coff-mips.c, * coff-rs6000.c,
+ * coff-sh.c, * coff-tic30.c, * coff-tic4x.c, * coff-tic54x.c,
+ * coff-x86_64.c, * coff-z80.c, * coff-z8k.c, * coff64-rs6000.c,
+ * elf-hppa.h, * elf-m10200.c, * elf-m10300.c, * elf32-arc.c,
+ * elf32-arm.c, * elf32-avr.c, * elf32-bfin.c, * elf32-cr16.c,
+ * elf32-cris.c, * elf32-crx.c, * elf32-csky.c, * elf32-d10v.c,
+ * elf32-d30v.c, * elf32-dlx.c, * elf32-epiphany.c,
+ * elf32-fr30.c, * elf32-frv.c, * elf32-ft32.c, * elf32-gen.c,
+ * elf32-h8300.c, * elf32-i386.c, * elf32-ip2k.c, * elf32-iq2000.c,
+ * elf32-lm32.c, * elf32-m32c.c, * elf32-m32r.c, * elf32-m68hc11.c,
+ * elf32-m68hc12.c, * elf32-m68k.c, * elf32-mcore.c, * elf32-mep.c,
+ * elf32-metag.c, * elf32-microblaze.c, * elf32-mips.c,
+ * elf32-moxie.c, * elf32-msp430.c, * elf32-mt.c, * elf32-nds32.c,
+ * elf32-nios2.c, * elf32-or1k.c, * elf32-pj.c, * elf32-ppc.c,
+ * elf32-pru.c, * elf32-rl78.c, * elf32-rx.c, * elf32-s12z.c,
+ * elf32-s390.c, * elf32-score.c, * elf32-score7.c,
+ * elf32-sh-relocs.h, * elf32-spu.c, * elf32-tic6x.c,
+ * elf32-tilepro.c, * elf32-v850.c, * elf32-vax.c,
+ * elf32-visium.c, * elf32-wasm32.c, * elf32-xc16x.c,
+ * elf32-xgate.c, * elf32-xstormy16.c, * elf32-xtensa.c,
+ * elf32-z80.c, * elf64-alpha.c, * elf64-bpf.c, * elf64-gen.c,
+ * elf64-mips.c, * elf64-mmix.c, * elf64-nfp.c, * elf64-ppc.c,
+ * elf64-s390.c, * elf64-x86-64.c, * elfn32-mips.c,
+ * elfnn-aarch64.c, * elfxx-ia64.c, * elfxx-loongarch.c,
+ * elfxx-mips.c, * elfxx-riscv.c, * elfxx-sparc.c,
+ * elfxx-tilegx.c, * mach-o-aarch64.c, * mach-o-arm.c,
+ * mach-o-i386.c, * mach-o-x86-64.c, * pdp11.c, * reloc.c,
+ * som.c, * vms-alpha.c: Adjust all uses of HOWTO.
+ * bfd-in2.h: Regenerate.
+ include/
+ * elf/arc-reloc.def: Adjust all uses of HOWTO.
+
+2022-06-08 Alan Modra <amodra@gmail.com>
+
+ HOWTO_RSIZE
+ Define a helper macro for HOWTO.
+
+ * reloc.c (HOWTO_RSIZE): Define.
+ (HOWTO): Use it.
+ * bfd-in2.h: Regenerate.
+
+2022-06-08 Alan Modra <amodra@gmail.com>
+
+ elf64-nfp reloc fix
+ These are all dummy howtos, there is no reason one of them should
+ have partial_inplace true.
+
+ * elf64-nfp.c (elf_nfp_howto_table <R_NFP_IMMED_LO16_I_B>): Don't
+ set partial_inplace.
+
+2022-06-08 Alan Modra <amodra@gmail.com>
+
+ coff-z80 reloc howto fixes
+ Mostly cosmetic unless attempting to link coff-z80 into another output
+ format.
+
+ * coff-z80.c (howto_table <R_IMM24, R_WORD0, R_WORD1>): Correct size.
+ (extra_case): Use bfd_{get,put}_24 when applying R_IMM24.
+
+2022-06-08 Alan Modra <amodra@gmail.com>
+
+ NONE reloc fixes
+ Make them all zero size standard do-nothing howtos.
+
+ * elf32-csky.c (csky_elf_howto_table <R_CKCORE_NONE>): Correct howto.
+ * elf32-ft32.c (ft32_elf_howto_table <R_FT32_NONE>): Likewise.
+ * elf32-gen.c (dummy): Likewise.
+ * elf32-nds32.c (none_howto): Likewise.
+ * elf32-nios2.c (elf_nios2_r2_howto_table_rel <R_NIOS2_NONE>):
+ Likewise.
+ * elf32-pru.c (elf_pru_howto_table_rel <R_PRU_NONE>): Likewise.
+ * elf32-v850.c (v800_elf_howto_table <R_V810_NONE>): Likewise.
+ * elf64-gen.c (dummy): Likewise.
+ * elfn32-mips.c (elf_mips_howto_table_rela <R_MIPS_NONE): Likewise.
+ * elfxx-mips.c (none_howto): Likewise.
+ * reloc.c (none_howto): Likewise.
+
+2022-06-08 Alan Modra <amodra@gmail.com>
+
+ asan: double free sb_kill
+ oss-fuzz hits a flaky crash with a double-free. I think this is due
+ to gas static state not being reinitialised between testcases, a bug
+ with oss-fuzz not gas. Anyway, this patch should avoid the problem.
+
+ * input-scrub.c (input_scrub_push): Move init of sb_index..
+ (input_scrub_reinit): ..to here.
+
+2022-06-08 GDB Administrator <gdbadmin@sourceware.org>
+
+ Automatic date update in version.in
+
+2022-06-07 Tom Tromey <tromey@adacore.com>
+
+ Use subclasses of windows_process_info
+ This changes windows_process_info to use virtual methods for its
+ callbacks, and then changes the two clients of this code to subclass
+ this class to implement the methods.
+
+ I considered using CRTP here, but that would require making the new
+ structures visible to the compilation of of nat/windows-nat.c. This
+ seemed like a bit of a pain, so I didn't do it.
+
+ This change then lets us change all the per-inferior globals to be
+ members of the new subclass. Note that there can still only be a
+ single inferior -- currently there's a single global of the new type.
+ This is just another step toward possibly implementing multi-inferior
+ for Windows.
+
+ It's possible this could be cleaned up further... ideally I'd like to
+ move more of the data into the base class. However, because gdb
+ supports Cygwin and gdbserver does not, and because I don't have a way
+ to build or test Cygwin, larger refactorings are difficult.
+
+2022-06-07 Tom Tromey <tromey@adacore.com>
+
+ Turn some windows-nat.c static functions into methods
+ This patch turns some windows-nat.c static functions into methods on
+ windows_nat_target. This avoids having to reference the
+ windows_nat_target singleton in some more spots -- a minor code
+ cleanup.
+
+ Allow ASLR to be disabled on Windows
+ On Windows, it is possible to disable ASLR when creating a process.
+ This patch adds code to do this, and hooks it up to gdb's existing
+ disable-randomization feature. Because the Windows documentation
+ cautions that this isn't available on all versions of Windows, the
+ CreateProcess wrapper function is updated to make the attempt, and
+ then fall back to the current approach if it fails.
+
+ Introduce wrapper for CreateProcess
+ This is a small refactoring that introduces a wrapper for the Windows
+ CreateProcess function. This is done to make the next patch a bit
+ simpler.
+
+2022-06-07 Enze Li <enze.li@hotmail.com>
+
+ Update my email address in gdb/MAINTAINERS
+
+2022-06-07 Tom Tromey <tromey@adacore.com>
+
+ Constify solib_name_from_address
+ I noticed that solib_name_from_address returned a non-const string,
+ but it's more appropriate to return const. This patch implements
+ this. Tested by rebuilding.
+
+2022-06-07 Tom de Vries <tdevries@suse.de>
+
+ [gdb/rust] Add missing _() for error call
+ In commit 1390b65a1b9 ("[gdb/rust] Fix literal truncation") I forgot to add
+ _() around a string using in an error call.
+
+ Fix this by adding the missing _().
+
+ Tested on x86_64-linux.
+
+2022-06-07 Tom de Vries <tdevries@suse.de>
+
+ [gdb] Allow frv::fr300 in selftests
+ In skip_arch in gdb/selftest-arch.c we skip architecture fr300 because of
+ PR20946, but the PR has been fixed by commit 0ae60c3ef45 ("Prevent an abort in
+ the FRV disassembler if the target bfd name is unknown.") in Januari 2017.
+
+ Remove the skipping of frv::fr300.
+
+ Tested on x86_64-linux.
+
+2022-06-07 GDB Administrator <gdbadmin@sourceware.org>
+
+ Automatic date update in version.in
+
+2022-06-06 Tom Tromey <tromey@adacore.com>
+
+ Consolidate "Python API" sections in NEWS
+ I noticed that the gdb NEWS file had two "Python API" sections in
+ "Changes since GDB 12". This patch consolidates the two. I chose to
+ preserve the second one, first because it is longer, and second
+ because I felt that user command changes should come before API
+ changes.
+
+ Simplify varobj "change" logic
+ varobj used to store 'print_value' as a C string, where NULL was a
+ valid value, and so it had logic to handle this situation. However,
+ at some point this was changed to be a std::string, and so the code
+ can be simplified in this spot.
+
+2022-06-06 Tom Tromey <tromey@adacore.com>
+
+ Remove "-break-insert -r" tests
+ PR mi/14270 points out that mi-break.exp has some tests for an
+ unimplemented "-r" switch for "-break-insert". This switch was never
+ implemented, and is not documented -- though it is mentioned in a
+ comment in the documentation. This patch removes the test and the doc
+ comment.
+
+ Bug: https://sourceware.org/bugzilla/show_bug.cgi?id=14270
+
+2022-06-06 Tom de Vries <tdevries@suse.de>
+
+ [gdb] Name arch selftests more clearly
+ When running some all archs selftest I get:
+ ...
+ $ gdb -q -batch -ex "maint selftest unpack_field_as_long"
+ Running selftest unpack_field_as_long::A6.
+ ...
+
+ By now I know that A6 is an arc architecture, but for others that's less
+ clear.
+
+ Fix this by using unpack_field_as_long::arc::A6 instead.
+
+ This then introduces redundant names like arm::arm, so try to avoid those,
+ though I'm not entirely convinced that that's worth the trouble.
+
+ This introduces the following new names:
+ ...
+ +Running selftest unpack_field_as_long::am33_2::am33-2.
+ +Running selftest unpack_field_as_long::arc::A6.
+ +Running selftest unpack_field_as_long::arc::A7.
+ +Running selftest unpack_field_as_long::arc::EM.
+ +Running selftest unpack_field_as_long::arc::HS.
+ +Running selftest unpack_field_as_long::arm::ep9312.
+ +Running selftest unpack_field_as_long::arm::iwmmxt.
+ +Running selftest unpack_field_as_long::arm::iwmmxt2.
+ +Running selftest unpack_field_as_long::arm::xscale.
+ +Running selftest unpack_field_as_long::bpf::xbpf.
+ +Running selftest unpack_field_as_long::frv::fr400.
+ +Running selftest unpack_field_as_long::frv::fr450.
+ +Running selftest unpack_field_as_long::frv::fr500.
+ +Running selftest unpack_field_as_long::frv::fr550.
+ +Running selftest unpack_field_as_long::frv::simple.
+ +Running selftest unpack_field_as_long::frv::tomcat.
+ +Running selftest unpack_field_as_long::iq2000::iq10.
+ +Running selftest unpack_field_as_long::m32c::m16c.
+ +Running selftest unpack_field_as_long::mep::c5.
+ +Running selftest unpack_field_as_long::mep::h1.
+ +Running selftest unpack_field_as_long::nds32::n1.
+ +Running selftest unpack_field_as_long::nds32::n1h.
+ +Running selftest unpack_field_as_long::nds32::n1h_v2.
+ +Running selftest unpack_field_as_long::nds32::n1h_v3.
+ +Running selftest unpack_field_as_long::nds32::n1h_v3m.
+ +Running selftest unpack_field_as_long::z80::ez80-adl.
+ +Running selftest unpack_field_as_long::z80::ez80-z80.
+ +Running selftest unpack_field_as_long::z80::gbz80.
+ +Running selftest unpack_field_as_long::z80::r800.
+ +Running selftest unpack_field_as_long::z80::z180.
+ ...
+
+ Tested on x86_64-linux.
+
+2022-06-06 Tom de Vries <tdevries@suse.de>
+
+ [gdb] Enable some more print_one_insn selftests
+ In print_one_insn_test we have this cluster of skipped tests:
+ ...
+ case bfd_arch_ia64:
+ case bfd_arch_mep:
+ case bfd_arch_mips:
+ case bfd_arch_tic6x:
+ case bfd_arch_xtensa:
+ return;
+ ...
+
+ Enable some of these, and document in more detail why they're enabled or
+ skipped.
+
+ Likewise, document bfd_arch_or1k because it's an odd case.
+
+ Tested on x86_64-linux.
+
+2022-06-06 Tom de Vries <tdevries@suse.de>
+
+ [gdb] Fix maint selftest -v print_one_insn
+ When running the print_one_insn selftests with -v, I get:
+ ...
+ $ gdb -q -batch -ex "maint selftest -v print_one_insn"
+ Running selftest print_one_insn::A6.
+ .shor 0x783eRunning selftest print_one_insn::A7.
+ trap_s 0x1Running selftest print_one_insn::ARC600.
+ .shor 0x783eRunning selftest print_one_insn::ARC601.
+ Running selftest print_one_insn::ARC700.
+ trap_s 0x1Running selftest print_one_insn::ARCv2.
+ trap_s 0x1Running selftest print_one_insn::EM.
+ trap_s 0x1Running selftest print_one_insn::HS.
+ trap_s 0x1Running selftest print_one_insn::Loongarch32.
+ ...
+
+ The insn is written to gdb_stdout, and there is code in the selftest to add a
+ newline after the insn, which writes to stream().
+
+ The stream() ui_file points into a string buffer, which the disassembler uses
+ before writing to gdb_stdout, so writing into it after the disassembler has
+ finished has no effect.
+
+ Fix this by using gdb_stdlog and debug_printf (which is what the unit test
+ infrastructure itself uses) instead, such that we have:
+ ...
+ Running selftest print_one_insn::A6.
+ .shor 0x783e
+ Running selftest print_one_insn::A7.
+ trap_s 0x1
+ Running selftest print_one_insn::ARC600.
+ .shor 0x783e
+ Running selftest print_one_insn::ARC601.
+ Running selftest print_one_insn::ARC700.
+ trap_s 0x1
+ Running selftest print_one_insn::ARCv2.
+ trap_s 0x1
+ Running selftest print_one_insn::Loongarch32.
+ ...
+
+ Note: I've also removed the printing of arch_name, which would give
+ us otherwise the redundant:
+ ...
+ Running selftest print_one_insn::A6.
+ arc .shor 0x783e
+ Running selftest print_one_insn::A7.
+ arc trap_s 0x1
+ ...
+
+ Tested on x86_64-linux.
+
+2022-06-06 Andrew Burgess <aburgess@redhat.com>
+
+ gdb/testsuite: add missing skip_python_tests call in py-doc-reformat.exp
+ In commit:
+
+ commit 51e8dbe1fbe7d8955589703140ca5eba7b4f1bd7
+ Date: Mon May 16 19:26:54 2022 +0100
+
+ gdb/python: improve formatting of help text for user defined commands
+
+ the test that was added (gdb.python/py-doc-reformat.exp) was missing a
+ call to skip_python_tests. As a result, this test would fail for any
+ GDB built within Python support.
+
+ This commit adds a call to skip_python_tests.
+
+2022-06-06 GDB Administrator <gdbadmin@sourceware.org>
+
+ Automatic date update in version.in
+
+2022-06-05 Tom Tromey <tom@tromey.com>
+
+ Remove obsolete Python 2 comment
+ I found a comment that referred to Python 2, but that is now obsolete
+ -- the code it refers to is gone. I'm checking in this patch to
+ remove the comment.
+
+ There's a similar comment elsewhere, but I plan to remove that one in
+ another patch I'm going to submit shortly.
+
+2022-06-05 GDB Administrator <gdbadmin@sourceware.org>
+
+ Automatic date update in version.in
+
+2022-06-04 Alan Modra <amodra@gmail.com>
+
+ asan: null dereference in coff_count_linenumbers
+ * coffgen.c (coff_count_linenumbers): Don't segfault when asymbol
+ the_bfd is NULL.
+
+ asan: uninitialised write in bfd_mach_o_write_contents
+ * mach-o.c (bfd_mach_o_write_contents): Always set
+ bfd_mach_o_dyld_info_command *_off fields.
+
+2022-06-04 Tom de Vries <tdevries@suse.de>
+
+ [gdb/ada] Fix literal truncation
+ Make sure we error out on overflow instead of truncating in all cases.
+
+ Tested on x86_64-linux, with a build with --enable-targets=all.
+
+2022-06-04 Tom de Vries <tdevries@suse.de>
+
+ [gdb/m2] Fix UB and literal truncation
+ Rewrite parse_number to use ULONGEST instead of LONGEST, to fix UB errors as
+ mentioned in PR29163.
+
+ Furthermore, make sure we error out on overflow instead of truncating in all
+ cases.
+
+ Tested on x86_64-linux, with a build with --enable-targets=all.
+
+ Bug: https://sourceware.org/bugzilla/show_bug.cgi?id=29163
+
+2022-06-04 Tom de Vries <tdevries@suse.de>
+
+ [gdb/rust] Fix literal truncation
+ Make sure we error out on overflow instead of truncating in all cases.
+
+ I've used as overflow string: "Integer literal is too large", based
+ on what I found at
+ <rust-lang/rust>/src/test/ui/parser/int-literal-too-large-span.rs
+ but perhaps someone has a better idea.
+
+ Tested on x86_64-linux, with a build with --enable-targets=all.
+
+2022-06-04 Tom de Vries <tdevries@suse.de>
+
+ [gdb/pascal] Fix literal truncation
+ Make sure we error out on overflow instead of truncating in all cases.
+
+ The current implementation of parse_number contains a comment about PR16377,
+ but that's related to C-like languages. In absence of information of whether
+ the same fix is needed for pascal, take the conservative approach and keep
+ behaviour for decimals unchanged.
+
+ Tested on x86_64-linux, with a build with --enable-targets=all.
+
+2022-06-04 Tom de Vries <tdevries@suse.de>
+
+ [gdb/go] Fix literal truncation
+ Make sure we error out on overflow instead of truncating in all cases.
+
+ The current implementation of parse_number contains a comment about PR16377,
+ but that's related to C-like languages. In absence of information of whether
+ the same fix is needed for go, take the conservative approach and keep
+ behaviour for decimals unchanged.
+
+ Tested on x86_64-linux, with a build with --enable-targets=all.
+
+2022-06-04 Tom de Vries <tdevries@suse.de>
+
+ [gdb/fortran] Fix literal truncation
+ As mentioned in commit 5b758627a18 ("Make gdb.base/parse_number.exp test all
+ architectures"):
+ ...
+ There might be a bug that 32-bit fortran truncates 64-bit values to
+ 32-bit, given "p/x 0xffffffffffffffff" returns "0xffffffff".
+ ...
+
+ More concretely, we have:
+ ...
+ $ for arch in i386:x86-64 i386; do \
+ gdb -q -batch -ex "set arch $arch" -ex "set lang fortran" \
+ -ex "p /x 0xffffffffffffffff"; \
+ done
+ The target architecture is set to "i386:x86-64".
+ $1 = 0xffffffffffffffff
+ The target architecture is set to "i386".
+ $1 = 0xffffffff
+ ...
+
+ Fix this by adding a range check in parse_number in gdb/f-exp.y.
+
+ Furthermore, make sure we error out on overflow instead of truncating in all
+ other cases.
+
+ Tested on x86_64-linux.
+
+2022-06-04 Tom de Vries <tdevries@suse.de>
+
+ [gdb/c] Fix type of 2147483648 and literal truncation
+ [ Assuming arch i386:x86-64, sizeof (int) == 4,
+ sizeof (long) == sizeof (long long) == 8. ]
+
+ Currently we have (decimal for 0x80000000):
+ ...
+ (gdb) ptype 2147483648
+ type = unsigned int
+ ...
+
+ According to C language rules, unsigned types cannot be used for decimal
+ constants, so the type should be long instead (reported in PR16377).
+
+ Fix this by making sure the type of 2147483648 is long.
+
+ The next interesting case is (decimal for 0x8000000000000000):
+ ...
+ (gdb) ptype 9223372036854775808
+ type = unsigned long
+ ...
+
+ According to the same rules, unsigned long is incorrect.
+
+ Current gcc uses __int128 as type, which is allowed, but we don't have that
+ available in gdb, so the strict response here would be erroring out with
+ overflow.
+
+ Older gcc without __int128 support, as well as clang use an unsigned type, but with
+ a warning. Interestingly, clang uses "unsigned long long" while gcc uses
+ "unsigned long", which seems the better choice.
+
+ Given that the compilers allow this as a convience, do the same in gdb
+ and keep type "unsigned long", and make this explicit in parser and test-case.
+
+ Furthermore, make sure we error out on overflow instead of truncating in all
+ cases.
+
+ Tested on x86_64-linux with --enable-targets=all.
+
+ Bug: https://sourceware.org/bugzilla/show_bug.cgi?id=16377
+
+2022-06-04 Tom de Vries <tdevries@suse.de>
+
+ [gdb/testsuite] Test more values in gdb.base/parse_numbers.exp
+ Currently we only test value 0xffffffffffffffff in test-case
+ gdb.base/parse_numbers.exp.
+
+ Test more interesting values, both in decimal and hex format, as well as
+ negative decimals for language modula-2.
+
+ This results in an increase in total tests from 15572 to 847448 (55 times
+ more tests).
+
+ Balance out the increase in runtime by reducing the number of architectures
+ tested: only test one architecture per sizeof longlong/long/int/short
+ combination, while keeping the possibility intact to run with all
+ architectures (through setting a variable in the test-case)
+
+ Results in slight reduction of total tests: 15572 -> 13853.
+
+ Document interesting cases in the expected results:
+ - wrapping from unsigned to signed
+ - truncation
+ - PR16377: using unsigned types to represent decimal constants in C
+
+ Running the test-case with a gdb build with -fsanitize=undefined, we trigger
+ two UB errors in the modula-2 parser, filed as PR29163.
+
+ Tested on x86_64-linux with --enable-targets=all.
+
+2022-06-04 Tom de Vries <tdevries@suse.de>
+
+ [gdb/testsuite] Fix ERROR in gdb.ctf/funcreturn.exp
+ On openSUSE Tumbleweed (with gcc-12, enabling ctf tests) I run into:
+ ...
+ ERROR: tcl error sourcing src/gdb/testsuite/gdb.ctf/funcreturn.exp.
+ ERROR: tcl error code NONE
+ ERROR: Unexpected arguments: \
+ {print v_double_func} \
+ {[0-9]+ = {double \(\)} 0x[0-9a-z]+.*} \
+ {print double function} \
+ }
+ ...
+
+ The problem is a curly brace as fourth argument to gdb_test, which errors out
+ due to recently introduced more strict argument checking in gdb_test.
+
+ Fix the error by removing the brace.
+
+ Though this fixes the error for me, due to PR29160 I get only FAILs, so I can't
+ claim proper testing on x86_64-linux.
+
+2022-06-04 Tom de Vries <tdevries@suse.de>
+
+ [gdb/testsuite] Fix gdb.threads/manythreads.exp with check-read1
+ When running test-case gdb.threads/manythreads.exp with check-read1, I ran
+ into this hard-to-reproduce FAIL:
+ ...
+ [New Thread 0x7ffff7318700 (LWP 31125)]^M
+ [Thread 0x7ffff7321700 (LWP 31124) exited]^M
+ [New T^C^M
+ ^M
+ Thread 769 "manythreads" received signal SIGINT, Interrupt.^M
+ [Switching to Thread 0x7ffff6d66700 (LWP 31287)]^M
+ 0x00007ffff7586a81 in clone () from /lib64/libc.so.6^M
+ (gdb) FAIL: gdb.threads/manythreads.exp: stop threads 1
+ ...
+
+ The matching in the failing gdb_test_multiple is done in an intricate way,
+ trying to pass on some order and fail on another order.
+
+ Fix this by rewriting the regexps to match one line at most, and detecting
+ invalid order by setting and checking state variables.
+
+ Tested on x86_64-linux.
+
+ Bug: https://sourceware.org/bugzilla/show_bug.cgi?id=29177
+
+2022-06-04 Tom de Vries <tdevries@suse.de>
+
+ [gdb] Fix warning in print_one_insn::ez80-adl
+ When running selftest print_one_insn::ez80-adl we run into this warning:
+ ...
+ Running selftest print_one_insn::ez80-adl.
+ warning: Unable to determine inferior's software breakpoint type: couldn't
+ find `_break_handler' function in inferior. Will be used default software \
+ breakpoint instruction RST 0x08.
+ ...
+
+ Fix this by explicitly handling bfd_arch_z80 in print_one_insn_test.
+
+ Tested on x86_64-linux.
+
+2022-06-04 GDB Administrator <gdbadmin@sourceware.org>
+
+ Automatic date update in version.in
+
+2022-06-03 Tom Tromey <tromey@adacore.com>
+
+ Use bool for evregpy_no_listeners_p
+ I noticed that evregpy_no_listeners_p should return a bool. This
+ patch makes this change. I'm checking it in.
+
+2022-06-03 Alan Modra <amodra@gmail.com>
+
+ asan: heap buffer overflow in _bfd_mips_elf_section_from_shdr
+ * elfxx-mips.c (_bfd_mips_elf_section_from_shdr): Sanity check
+ intopt.size and remaining bytes in section for reginfo.
+
+2022-06-03 Alan Modra <amodra@gmail.com>
+
+ Re: ubsan: undefined shift in frag_align_code
+ This one needs the same fix too.
+
+ * config/tc-i386.h (MAX_MEM_FOR_RS_ALIGN_CODE): Avoid signed
+ integer overflow.
+
+2022-06-03 Tom de Vries <tdevries@suse.de>
+
+ [gdb] Fix warning in foreach_arch selftests
+ When running the selftests, I run into:
+ ...
+ $ gdb -q -batch -ex "maint selftest"
+ ...
+ Running selftest execute_cfa_program::aarch64:ilp32.
+ warning: A handler for the OS ABI "GNU/Linux" is not built into this
+ configuration of GDB. Attempting to continue with the default aarch64:ilp32
+ settings.
+ ...
+ and likewise for execute_cfa_program::i8086 and
+ execute_cfa_program::ia64-elf32.
+
+ The warning can easily be reproduced outside the selftests by doing:
+ ...
+ $ gdb -q -batch -ex "set arch aarch64:ilp32"
+ ...
+ and can be prevented by first doing "set osabi none".
+
+ Fix the warning by setting osabi to none while doing selftests that iterate
+ over all architectures.
+
+ This causes a regression in the print_one_insn selftests for the ARC
+ architecture.
+
+ The problem is pre-existing, and can be demonstrated (already without this
+ patch) using:
+ ...
+ $ gdb -q -batch -ex "set osabi none" -ex "maint selftest print_one_insn::A6"
+ Running selftest print_one_insn::A6.
+ Self test failed: Cannot access memory at address 0x0
+ Ran 1 unit tests, 1 failed
+ $
+ ...
+
+ For ARC, we use the generic case in print_one_insn_test, containing this code:
+ ...
+ int kind = gdbarch_breakpoint_kind_from_pc (gdbarch, &pc);
+ ...
+ insn = gdbarch_sw_breakpoint_from_kind (gdbarch, kind, &bplen);
+ ...
+
+ The problem is that with osabi linux we trigger:
+ ...
+ static int
+ arc_linux_breakpoint_kind_from_pc (struct gdbarch *gdbarch, CORE_ADDR *pcptr)
+ {
+ return trap_size;
+ }
+ ...
+ but with osabi none:
+ ...
+ arc_breakpoint_kind_from_pc (struct gdbarch *gdbarch, CORE_ADDR *pcptr)
+ {
+ size_t length_with_limm = gdb_insn_length (gdbarch, *pcptr);
+ ...
+ which needs access to memory, and will consequently fail.
+
+ Fix this in print_one_insn_test, in the default case, by iterating over
+ supported osabi's to makes sure we trigger arc_linux_breakpoint_kind_from_pc
+ which will give us a usable instruction to disassemble.
+
+ Tested on x86_64-linux.
+
+2022-06-03 Tom de Vries <tdevries@suse.de>
+
+ Revert "[gdb] Fix warning in foreach_arch selftests"
+ This reverts commit fc18b1c5afd ("[gdb] Fix warning in foreach_arch
+ selftests").
+
+ The commit introduced regressions for an --enable-targets=all build:
+ ...
+ Running selftest print_one_insn::A6.^M
+ Self test failed: Cannot access memory at address 0x0^M
+ ...
+ and while investigating those I realized that the commit fc18b1c5afd
+ complicates things by trying to set the current osabi.
+
+ So, revert the patch in preparation for a simpler solution.
+
+ Tested on x86_64-linux.
+
+2022-06-03 Jan Beulich <jbeulich@suse.com>
+
+ x86: exclude certain ISA extensions from v3/v4 ISA
+ Like TBM and LWP, XOP and FMA4 also shouldn't be included in v3.
+
+ Like AVX512-4VNNIW, AVX512-4FMAPS also shouldn't be included in v4.
+
+2022-06-03 Roland McGrath <mcgrathr@google.com>
+
+ gdb: LoongArch: Remove nonportable #include
+ Don't use gregset.h in *-tdep.c since it's not usable on
+ hosts that don't have <sys/procfs.h>. It's not needed by
+ this file, and should only be needed by *-nat.c files.
+
+2022-06-03 Alan Modra <amodra@gmail.com>
+
+ Re: asan: mips_gprel_reloc segfault
+ Similarly for the elf mips support.
+
+ * elf32-mips.c (mips_elf_final_gp): Don't segfault on symbols
+ in any of the bfd_is_const_section sections.
+ * elf64-mips.c (mips_elf64_final_gp): Likewise.
+ * elfn32-mips.c (mips_elf_final_gp): Likewise.
+
+2022-06-03 Alan Modra <amodra@gmail.com>
+
+ asan: mips_gprel_reloc segfault
+ Not just the undefined section has a NULL owner, the absolute section
+ has too. Which means we can't find output_bfd for __gp. Also, may as
+ well test directly for output_bfd == NULL.
+
+ * coff-mips.c (mips_gprel_reloc): Don't segfault on any of
+ bfd_is_const_section sections.
+
+2022-06-03 GDB Administrator <gdbadmin@sourceware.org>
+
+ Automatic date update in version.in
+
+2022-06-02 Tom de Vries <tdevries@suse.de>
+
+ [gdb/testsuite] Detect change instead of init in gdb.mi/mi-var-block.exp
+ On openSUSE Tumbleweed with target board unix/-m32, I run into:
+ ...
+ PASS: gdb.mi/mi-var-block.exp: step at do_block_test 2
+ Expecting: ^(-var-update \*[^M
+ ]+)?(\^done,changelist=\[{name="foo",in_scope="true",type_changed="false",has_more="0"},
+ {name="cb",in_scope="true",type_changed="false",has_more="0"}\][^M
+ ]+[(]gdb[)] ^M
+ [ ]*)
+ -var-update *^M
+ ^done,changelist=[{name="foo",in_scope="true",type_changed="false",has_more="0"}]^M
+ (gdb) ^M
+ FAIL: gdb.mi/mi-var-block.exp: update all vars: cb foo changed (unexpected output)
+ ...
+
+ The problem is that the test-case attempts to detect a change in the cb
+ variable caused by this initialization:
+ ...
+ void
+ do_block_tests ()
+ {
+ int cb = 12;
+ ...
+ but that only works if the stack location happens to be unequal to 12 before
+ the initialization.
+
+ Fix this by first initializing to 0, and then changing the value to 12:
+ ...
+ - int cb = 12;
+ + int cb = 0;
+ + cb = 12;
+ ...
+ and detecting that change.
+
+ Tested on x86_64-linux.
+
+ Bug: https://sourceware.org/bugzilla/show_bug.cgi?id=29195
+
+2022-06-02 Eli Zaretskii <eliz@gnu.org>
+
+ Rearrange and slightly reword the "Location Specification" section
+ This rearranges and changes the wording of the "Location
+ Specification" section of the GDB manual in minor ways.
+
+2022-06-02 Tom Tromey <tromey@adacore.com>
+
+ ODR warning for "main"
+ "main" is redeclared with a different type in maint.c. I think this
+ might have come from my first gdb patch, many many years ago. While I
+ wonder if this profiling code is actually useful at all any more, in
+ the meantime it's simple to fix the declaration.
+
+ Bug: https://sourceware.org/bugzilla/show_bug.cgi?id=22395
+
+2022-06-02 Tom Tromey <tromey@adacore.com>
+
+ ODR warnings for "struct coff_symbol"
+ "struct coff_symbol" is defined in multiple .c files, causing ODR
+ warnings. This patch renames just the xcoffread.c type.
+
+ Bug: https://sourceware.org/bugzilla/show_bug.cgi?id=22395
+
+2022-06-02 Tom Tromey <tromey@adacore.com>
+
+ ODR warnings for "struct insn_decode_record_t"
+ "struct insn_decode_record_t" is defined in multiple .c files, causing
+ ODR warnings. This patch renames the types, and removes the use of
+ "typedef" here -- this is a C-ism that's no longer needed.
+
+ Bug: https://sourceware.org/bugzilla/show_bug.cgi?id=22395
+
+2022-06-02 Tom Tromey <tromey@adacore.com>
+
+ ODR warnings for "struct insn_info"
+ "struct insn_info" is defined in multiple .c files, causing ODR
+ warnings. This patch renames the type in z80-tdep.c, leaving the
+ other one alone.
+
+ Bug: https://sourceware.org/bugzilla/show_bug.cgi?id=22395
+
+2022-06-02 Tom Tromey <tromey@adacore.com>
+
+ ODR warnings from overlay constants
+ Some overlay-related constants are duplicated in z80-tdep.c, causing
+ ODR warnings. This patch renames just the z80-specific ones.
+
+ Bug: https://sourceware.org/bugzilla/show_bug.cgi?id=22395
+
+2022-06-02 Tom Tromey <tromey@adacore.com>
+
+ ODR warning for "enum string_repr_result"
+ "enum string_repr_result" is defined in multiple .c files, causing ODR
+ warnings. This patch renames the types.
+
+ Bug: https://sourceware.org/bugzilla/show_bug.cgi?id=22395
+
+2022-06-02 Tom Tromey <tromey@adacore.com>
+
+ ODR warning for "struct find_targ_sec_arg"
+ "struct find_targ_sec_arg" is defined in multiple .c files, causing
+ ODR warnings. This patch renames the types.
+
+ Bug: https://sourceware.org/bugzilla/show_bug.cgi?id=22395
+
+2022-06-02 Tom Tromey <tromey@adacore.com>
+
+ ODR warning for "struct stack_item"
+ "struct stack_item" is defined in multiple .c files, causing ODR
+ warnings. This patch renames these types.
+
+ Bug: https://sourceware.org/bugzilla/show_bug.cgi?id=22395
+
+2022-06-02 Tom Tromey <tromey@adacore.com>
+
+ ODR warning for "struct instruction_type"
+ "struct instruction_type" is defined in multiple .c files, causing an
+ ODR warning. This patch renames the types.
+
+ Bug: https://sourceware.org/bugzilla/show_bug.cgi?id=22395
+
+2022-06-02 Tom Tromey <tromey@adacore.com>
+
+ ODR warning for struct ext_link_map
+ This renames the solib-dsbt.c copy of "struct ext_link_map" to avoid
+ an ODR warning.
+
+ Bug: https://sourceware.org/bugzilla/show_bug.cgi?id=22395
+
+2022-06-02 Tom Tromey <tromey@adacore.com>
+
+ ODR warning for struct field_info
+ This renames one of the instance of "struct field_info" to avoid an
+ ODR warning.
+
+ Bug: https://sourceware.org/bugzilla/show_bug.cgi?id=22395
+
+2022-06-02 Tom Tromey <tromey@adacore.com>
+
+ ODR warnings for struct nextfield
+ "struct nextfield" is defined in multiple places in GDB. This patch
+ renames just the stabs one, leaving the DWARF one untouched.
+
+ Bug: https://sourceware.org/bugzilla/show_bug.cgi?id=22395
+
+2022-06-02 Tom Tromey <tromey@adacore.com>
+
+ ODR warnings for struct symloc
+ "struct symloc" is defined in multiple spots in gdb, causing ODR
+ warnings. This patch renames these.
+
+ Bug: https://sourceware.org/bugzilla/show_bug.cgi?id=22395
+
+2022-06-02 Tom Tromey <tromey@adacore.com>
+
+ Fix ODR warning in observable.h
+ observable.h triggers an ODR warning because this line:
+
+ extern observable<struct target_ops */* target */> target_changed;
+
+ ... may be the only declaration of "struct target_ops" in scope
+ (depending on the particular .c file) -- and this declares it in a
+ namespace, resulting in confusion.
+
+ This patch fixes the problem by adding a forward declaration.
+
+ Bug: https://sourceware.org/bugzilla/show_bug.cgi?id=22395
+
+2022-06-02 Tiezhu Yang <yangtiezhu@loongson.cn>
+
+ gdb: LoongArch: Implement the software_single_step gdbarch method
+ When execute the following command on LoongArch:
+
+ make check-gdb TESTS="gdb.base/branch-to-self.exp"
+
+ there exist the following failed testcases:
+
+ FAIL: gdb.base/branch-to-self.exp: single-step: si (timeout)
+ FAIL: gdb.base/branch-to-self.exp: break-cond: side=host: continue to breakpoint: continue to break (timeout)
+ FAIL: gdb.base/branch-to-self.exp: break-cond: side=host: p counter (timeout)
+
+ Implement the software_single_step gdbarch method to decode the current
+ branch instruction and determine the address of the next instruction on
+ LoongArch to fix the above failed testcases.
+
+2022-06-02 Ilya Leoshkevich <iii@linux.ibm.com>
+
+ gdb: Do not add empty sections to the section map
+ From: Ulrich Weigand <ulrich.weigand@de.ibm.com>
+
+ build_objfile_section_table () creates four synthetic sections per
+ objfile, which are collected by update_section_map () and passed to
+ std::sort (). When there are a lot of objfiles, for example, when
+ debugging JITs, the presence of these sections slows down the sorting
+ significantly.
+
+ The output of update_section_map () is used by find_pc_section (),
+ which can never return any of these sections: their size is 0, so they
+ cannot be accepted by bsearch_cmp ().
+
+ Filter them (and all the other empty sections) out in
+ insert_section_p (), which is used only by update_section_map ().
+
+2022-06-02 Jon Turney <jon.turney@dronecode.org.uk>
+
+ Fix a new warning on Cygwin
+ > ../../gdb/windows-nat.c: In function ‘windows_solib* windows_make_so(const char*, LPVOID)’:
+ > ../../gdb/windows-nat.c:714:12: error: declaration of ‘char name [512]’ shadows a parameter [-Werror=shadow=compatible-local]
+ > 714 | char name[SO_NAME_MAX_PATH_SIZE];
+ > | ^~~~
+ > ../../gdb/windows-nat.c:655:30: note: shadowed declaration is here
+ > 655 | windows_make_so (const char *name, LPVOID load_addr)
+ > | ~~~~~~~~~~~~^~~~
+
+ Fix Cygwin build after 85b25bd9
+ Fix Cygwin build after 85b25bd9 ("Simplify windows-nat.c solib handling").
+
+ Fix Cygwin build after 0578e87f
+ Fix Cygwin build after 0578e87f ("Remove some globals from
+ nat/windows-nat.c"). Update code under ifdef __CYGWIN__ for globals
+ moved to members of struct windows_process_info.
+
+ Fix Cygwin build after fcab5839
+ Fix Cygwin build after fcab5839 ("Implement pid_to_exec_file for Windows
+ in gdbserver"). That change moves code from gdb/windows-nat.c to
+ gdb/nat/windows-nat.c, but doesn't add the required typedefs and
+ includes for parts of that code under ifdef __CYGWIN__.
+
+2022-06-02 Alan Modra <amodra@gmail.com>
+
+ Re: ubsan: signed integer overflow in atof_generic
+ Oops.
+
+ * atof-generic.c: Include limits.h.
+
+2022-06-02 Alan Modra <amodra@gmail.com>
+
+ ubsan: signed integer overflow in atof_generic
+ Fix the signed overflows by using unsigned variables and detect
+ overflow at BUG! comment.
+
+ * atof-generic.c (atof_generic): Avoid signed integer overflow.
+ Return ERROR_EXPONENT_OVERFLOW if exponent overflows a long.
+
+2022-06-02 Alan Modra <amodra@gmail.com>
+
+ asan: uninit write _bfd_ecoff_write_object_contents
+ * ecoff.c (_bfd_ecoff_write_object_contents): zalloc reloc_buff.
+
+ asan: null deref in coff_write_relocs
+ * coffcode.h (coff_write_relocs): Don't deref NULL howto.
+
+ ubsan: undefined shift in frag_align_code
+ * frags.c (MAX_MEM_FOR_RS_ALIGN_CODE): Avoid signed integer
+ overflow.
+
+2022-06-02 Alan Modra <amodra@gmail.com>
+
+ gas read_a_source_file #APP processing
+ This fixes some horrible code using do_scrub_chars. What we had ran
+ text through do_scrub_chars twice, directly in read_a_source_file and
+ again via the input_scrub_include_sb call. That's silly, and since
+ do_scrub_chars is a state machine, possibly wrong. More silliness is
+ evident in the temporary malloc'd buffer for do_scrub_chars output,
+ which should have been written directly to sbuf.
+
+ So, get rid of the do_scrub_chars call and support functions, leaving
+ scrubbing to input_scrub_include_sb. I did wonder about #NO_APP
+ overlapping input_scrub_next_buffer buffers, but that should only
+ happen if the string starts in one file and finishes in another.
+
+ * read.c (scrub_string, scrub_string_end): Delete.
+ (scrub_from_string): Delete.
+ (read_a_source_file): Rewrite #APP processing.
+
+2022-06-02 Alan Modra <amodra@gmail.com>
+
+ sb_scrub_and_add_sb not draining input string buffer
+ It is possible for sb_scrub_and_add_sb to not consume all of the input
+ string buffer. If this happens for reasons explained in the comment,
+ do_scrub_chars can leave pointers to the string buffer for the next
+ call. This patch fixes that by ensuring the input is drained. Note
+ that the behaviour for an empty string buffer is also changed,
+ avoiding another do_scrub_chars bug where empty input and single char
+ sized output buffers could result in a write past the end of the
+ output.
+
+ sb.c (sb_scrub_and_add_sb): Loop until all of input sb is
+ consumed.
+
+2022-06-02 Alan Modra <amodra@gmail.com>
+
+ asan: heap buffer overflow in dwarf2_directive_filename
+ Seen with .file 4294967289 "xxx.c"
+
+ * dwarf2dbg.c (assign_file_to_slot): Catch more cases of integer
+ overflow. Make param i an unsigned int.
+
+2022-06-02 Alan Modra <amodra@gmail.com>
+
+ asan: NULL deref in scan_unit_for_symbols
+ Since commit b43771b045 it has been possible to look up addresses
+ that match a unit with errors, since ranges are added to a trie while
+ the unit is being parsed. On error, parse_comp_unit leaves
+ first_child_die_ptr NULL which results in a NULL info_ptr being passed
+ to scan_unit_for_symbols. Fix this by setting unit->error.
+
+ Also wrap some overlong lines, and fix some formatting errors.
+
+ * dwarf2.c: Formatting.
+ (parse_comp_unit): Set unit->error on err_exit path.
+
+2022-06-02 GDB Administrator <gdbadmin@sourceware.org>
+
+ Automatic date update in version.in
+
+2022-06-01 Tom de Vries <tdevries@suse.de>
+
+ [gdb] Fix warning in foreach_arch selftests
+ When running the selftests, I run into:
+ ...
+ $ gdb -q -batch -ex "maint selftest"
+ ...
+ Running selftest execute_cfa_program::aarch64:ilp32.
+ warning: A handler for the OS ABI "GNU/Linux" is not built into this
+ configuration of GDB. Attempting to continue with the default aarch64:ilp32
+ settings.
+ ...
+ and likewise for execute_cfa_program::i8086 and
+ execute_cfa_program::ia64-elf32.
+
+ The warning can easily be reproduced outside the selftests by doing:
+ ...
+ $ gdb -q -batch -ex "set arch aarch64:ilp32"
+ ...
+ and can be prevented by first doing "set osabi none".
+
+ Fix the warning by setting osabi to none while doing selftests that iterate
+ over all architectures.
+
+ Tested on x86_64-linux.
+
+2022-06-01 Tom Tromey <tromey@adacore.com>
+
+ Add gdb.current_language and gdb.Frame.language
+ This adds the gdb.current_language function, which can be used to find
+ the current language without (1) ever having the value "auto" or (2)
+ having to parse the output of "show language".
+
+ It also adds the gdb.Frame.language, which can be used to find the
+ language of a given frame. This is normally preferable if one has a
+ Frame object handy.
+
+2022-06-01 Yvan Roux <yvan.roux@foss.st.com>
+
+ [arm] Don't use special treatment for PC
+ In an exception frame the PC register is extracted from the stack
+ just like other base registers, so there is no need for a special
+ treatment.
+
+ [arm] Add support for FPU registers in prologue unwinder
+ The prologue unwinder had support for FPU registers, but only to
+ calculate the correct offset on the stack, the values were not saved.
+
+2022-06-01 Yvan Roux <yvan.roux@foss.st.com>
+
+ [arm] d0..d15 are 64-bit each, not 32-bit
+ When unwinding the stack, the floating point registers d0 to d15
+ need to be handled as double words, not words.
+
+ Only the first 8 registers have been confirmed fixed with this patch
+ on a STM32F407-DISC0 board, but the upper 8 registers on Cortex-M33
+ should be handled in the same way.
+
+ The test consisted of running a program compiled with float-abi=hard.
+ In the main function, a function taking a double as an argument was
+ called. After the function call, a hardware timer was used to
+ trigger an interrupt.
+
+ In the debug session, a breakpoint was set in the function called
+ from main to verify the content of the registers using "info float"
+ and another breakpoint in the interrupt handler was used to check
+ the same registers using "info float" on frame 2 (the frame just
+ before the dummy frame created for the signal handler in gdb).
+
+2022-06-01 Yvan Roux <yvan.roux@foss.st.com>
+
+ [arm] Cleanup: use hex for offsets
+ Changed offset from decimal to hex to match architecture reference
+ manual terminology and keep coherency with the rest of the code.
+
+2022-06-01 Jiangshuai Li <jiangshuai_li@c-sky.com>
+
+ gdb:csky save fpu and vdsp info to struct csky_gdbarch_tdep
+ First, add three variables fpu_abi, fpu_hardfp and vdsp_version
+ to csky_gdbarch_tdep. They will be initialized from info.abfd in
+ cskg_gdbarch_init.
+
+ Now, they are just used to find a candidate among the list of pre-declared
+ architectures
+
+ Later, they will be used in gdbarch_return_value and gdbarch_push_dummy_call
+ for funtions described below:
+ fpu_abi: to check if the bfd is using VAL_CSKY_FPU_ABI_HARD or
+ VAL_CSKY_FPU_ABI_SOFT
+ fpu_hardfp: to check if the bfd is using VAL_CSKY_FPU_HARDFP_SINGLE
+ or VAL_CSKY_FPU_HARDFP_DOUBLE
+ vdsp_version: to check if a function is returned with CSKY_VRET_REGNUM
+
+2022-06-01 Alan Modra <amodra@gmail.com>
+
+ Re: use libiberty xmalloc in bfd/doc/chew.c
+ We can't use libiberty.a in chew. libiberty is a host library, chew
+ a build program. Partly revert commit 7273d78f3f7a, instead define
+ local versions of the libiberty functions. ansidecl.h also isn't
+ needed.
+
+ * doc/chew.c: Don't include libiberty.h or ansidecl.h.
+ (xmalloc, xrealloc, xstrdup): New functions.
+ * doc/local.mk (LIBIBERTY): Don't define or use.
+ * Makefile.in: Regenerate.
+
+2022-06-01 GDB Administrator <gdbadmin@sourceware.org>
+
+ Automatic date update in version.in
+
+2022-06-01 H.J. Lu <hjl.tools@gmail.com>
+
+ x86: Properly handle IFUNC function pointer reference
+ Update
+
+ commit 68c4956b1401de70173848a6bdf620cb42fa9358
+ Author: H.J. Lu <hjl.tools@gmail.com>
+ Date: Tue Apr 26 09:08:54 2022 -0700
+
+ x86: Properly handle function pointer reference
+
+ to properly handle IFUNC function pointer reference. Since IFUNC symbol
+ value is only known at run-time, set pointer_equality_needed for IFUNC
+ function pointer reference in PDE so that it will be resolved to its PLT
+ entry directly.
+
+ bfd/
+
+ PR ld/29216
+ * elf32-i386.c (elf_i386_scan_relocs): Set pointer_equality_needed
+ for IFUNC function pointer reference in PDE.
+ * elf64-x86-64.c (elf_x86_64_scan_relocs): Likewise.
+
+ ld/
+
+ PR ld/29216
+ * testsuite/ld-ifunc/ifunc.exp: Run PR ld/29216 test.
+ * testsuite/ld-ifunc/pr29216.c: New file.
+
+2022-05-31 H.J. Lu <hjl.tools@gmail.com>
+
+ i386: Ajdust more tests for opcodes/i386: remove trailing whitespace
+ This fixes:
+
+ FAIL: Build ifunc-1a with -z ibtplt
+ FAIL: Build ifunc-1a with PIE -z ibtplt
+ FAIL: Build libno-plt-1b.so
+ FAIL: No PLT (dynamic 1a)
+ FAIL: No PLT (dynamic 1b)
+ FAIL: No PLT (dynamic 1c)
+ FAIL: No PLT (static 1d)
+ FAIL: No PLT (PIE 1e)
+ FAIL: No PLT (PIE 1f)
+ FAIL: No PLT (PIE 1g)
+ FAIL: No PLT (dynamic 1h)
+ FAIL: No PLT (dynamic 1i)
+ FAIL: No PLT (static 1j)
+
+ * ld-i386/libno-plt-1b.dd: Remove trailing whitespaces.
+ * ld-i386/no-plt-1a.dd: Likewise.
+ * ld-i386/no-plt-1b.dd: Likewise.
+ * ld-i386/no-plt-1c.dd: Likewise.
+ * ld-i386/no-plt-1d.dd: Likewise.
+ * ld-i386/no-plt-1e.dd: Likewise.
+ * ld-i386/no-plt-1f.dd: Likewise.
+ * ld-i386/no-plt-1g.dd: Likewise.
+ * ld-i386/no-plt-1h.dd: Likewise.
+ * ld-i386/no-plt-1i.dd: Likewise.
+ * ld-i386/no-plt-1j.dd: Likewise.
+ * ld-i386/plt-main-ibt.dd: Likewise.
+ * ld-i386/plt-pie-ibt.dd: Likewise.
+
+2022-05-31 Tom Tromey <tom@tromey.com>
+
+ Use unique_ptr for objfiles
+ A while back, I changed objfiles to be held via a shared_ptr. The
+ idea at the time was that this was a step toward writing to the index
+ cache in the background, and this would let gdb keep a reference alive
+ to do so. However, since then we've rewritten the DWARF reader, and
+ the new index can do this without requiring a shared pointer -- in
+ fact there are patches pending to implement this.
+
+ This patch switches objfile management to unique_ptr, which makes more
+ sense now.
+
+ Regression tested on x86-64 Fedora 34.
+
+2022-05-31 Nils-Christian Kempke <nils-christian.kempke@intel.com>
+
+ gdb/testsuite: fixup common-block.exp for intel compilers
+ The order in which the variables in info common and info locals are
+ displayed is compiler (and dwarf) dependent. While all symbols should
+ be displayed the order is not fixed.
+
+ I added a gdb_test_multiple that lets ifx and ifort pass in cases where
+ only the order differs.
+
+2022-05-31 Nils-Christian Kempke <nils-christian.kempke@intel.com>
+
+ gdb, testsuite, fortran: fixup mixed-lang-stack for Intel/LLVM compilers
+ When value-printing a pointer within GDB by default GDB will look for
+ defined symbols residing at the address of the pointer. For the given
+ test the Intel/LLVM compiler stacks both display a symbol associated
+ with a printed pointer while the gnu stack does not. This leads to
+ failures in the test when running the test with CC_FOR_TARGET='clang'
+ CXX_FOR_TARGET='clang' F90_FOR_TARGET='flang'"
+
+ (gdb) b 37
+ (gdb) r
+ (gdb) f 6
+ (gdb) info args
+ a = 1
+ b = 2
+ c = 3
+ d = 4 + 5i
+ f = 0x419ed0 "abcdef"
+ g = 0x4041a0 <.BSS4>
+
+ or CC_FOR_TARGET='icx' CXX_FOR_TARGET='icpx' F90_FOR_TARGET='ifx'"
+
+ (gdb) b 37
+ (gdb) r
+ (gdb) f 6
+ (gdb) info args
+ a = 1
+ b = 2
+ c = 3
+ d = 4 + 5i
+ f = 0x52eee0 "abcdef"
+ g = 0x4ca210 <mixed_func_1a_$OBJ>
+
+ For the compiled binary the Intel/LLVM compilers both decide to move the
+ local variable g into the .bss section of their executable. The gnu
+ stack will keep the variable locally on the stack and not define a
+ symbol for it.
+
+ Since the behavior for Intel/LLVM is actually expected I adapted the
+ testcase at this point to be a bit more allowing for other outputs.
+ I added the optional "<SYMBOLNAME>" to the regex testing for g.
+
+ The given changes reduce the test fails for Intel/LLVM stack by 4 each.
+
+2022-05-31 Nils-Christian Kempke <nils-christian.kempke@intel.com>
+
+ gdb, testsuite, fortran: fix double free in mixed-lang-stack.exp
+ While testing mixed-lang-stack I realized that valgrind actually
+ complained about a double free in the test.
+
+ All done
+ ==2503051==
+ ==2503051== HEAP SUMMARY:
+ ==2503051== in use at exit: 0 bytes in 0 blocks
+ ==2503051== total heap usage: 26 allocs, 27 frees, 87,343 bytes allocated
+ ==2503051==
+ ==2503051== All heap blocks were freed -- no leaks are possible
+ ==2503051==
+ ==2503051== For lists of detected and suppressed errors, rerun with: -s
+ ==2503051== ERROR SUMMARY: 1 errors from 1 contexts (suppressed: 0 from 0)
+
+ Reason for this is that in mixed-lang-stack.cpp in mixed_func_1f an
+ object "derived_type obj" goes on the stack which is then passed-by-value
+ (so copied) to mixed_func_1g. The default copy-ctor will be called but,
+ since derived_type contains a heap allocated string and the copy
+ constructor is not implemented it will only be able to shallow copy the
+ object. Right after each of the functions the object gets freed - on the
+ other hand the d'tor of derived_type actually is implemented and calls
+ free on the heap allocated string which leads to a double free. Instead
+ of obeying the rule of 3/5 I just got rid of all that since it does not
+ serve the test. The string is now just a const char* = ".." object
+ member.
+
+2022-05-31 Nils-Christian Kempke <nils-christian.kempke@intel.com>
+
+ testsuite, fortran: allow additional completions in module.exp
+ For ifort, ifx, and flang the tests "complete modm" and "complete
+ modmany" fail. This is because all three emit additional completion
+ suggestions. These additional suggestions have their origin in symbols
+ emitted by the compilers which can also be completed from the respective
+ incomplete word (modm or modmany). For this specific example gfortran
+ does not emit any additional symbols.
+
+ For example, in this test the linkage name for var_a in ifx is
+ "modmany_mp_var_a_" while gfortran uses "__modmany_MOD_var_a" instead.
+ Since modmany_mp_var_a can be completed from modm and also modmany they
+ will get displayed, while gfortran's symbol starts with "__" and thus will
+ be ignored (it cannot be a completion of a word starting with "m").
+
+ Similar things happen in flang and ifort. Some example output is shown
+ below:
+
+ FLANG
+ (gdb) complete p modm
+ p modmany
+ p modmany::var_a
+ p modmany::var_b
+ p modmany::var_c
+ p modmany::var_i
+ p modmany_
+
+ IFX/IFORT
+ (gdb) complete p modm
+ p modmany
+ p modmany._
+ p modmany::var_a
+ p modmany::var_b
+ p modmany::var_c
+ p modmany::var_i
+ p modmany_mp_var_a_
+ p modmany_mp_var_b_
+ p modmany_mp_var_c_
+ p modmany_mp_var_i_
+
+ GFORTRAN
+ (gdb) complete p modm
+ p modmany
+ p modmany::var_a
+ p modmany::var_b
+ p modmany::var_c
+ p modmany::var_i
+
+ I want to emphasize: for Fortran (and also C/C++) the complete command
+ does not actually check whether its suggestions make sense - all it does
+ is look for any symbol (in the minimal symbols, partial symbols etc.)
+ that a given substring can be completed to (meaning that the given substring
+ is the beginning of the symbol). One can easily produce a similar
+ output for the gfortran compiled executable. For this look at the
+ slightly modified "complete p mod" in gfortran:
+
+ (gdb) complete p mod
+ p mod1
+ p mod1::var_const
+ ...
+ p mod_1.c
+ p modcounter
+ p mode_t
+ p modf
+ ...
+ p modify_ldt
+ p modmany
+ p modmany::var_a
+ p modmany::var_b
+ p modmany::var_c
+ p modmany::var_i
+ p module
+ p module.f90
+ p module_entry
+ p moduse
+ p moduse::var_x
+ p moduse::var_y
+
+ Many of the displayed symbols do not actually work with print:
+
+ (gdb) p mode_t
+ Attempt to use a type name as an expression
+ (gdb) p mod_1.c
+ No symbol "mod_1" in current context.
+ (gdb)
+
+ I think that in the given test the output for gfortran only looks nice
+ "by chance" rather than is actually expected. Expected is any output
+ that also contains the completions
+
+ p modmany
+
+ p modmany::var_a
+ p modmany::var_b
+ p modmany::var_c
+ p modmany::var_i
+
+ while anythings else can be displayed as well (depending on the
+ compiler and its emitted symbols).
+
+ This, I'd consider all three outputs as valid and expected - one is just
+ somewhat lucky that gfortran does not produce any additional symbols that
+ got matched.
+
+ The given patch improves test performance for all three compilers
+ by allowing additional suggested completions inbetween and after
+ the two given blocks in the test. I did not allow additional print
+ within the modmany_list block since the output is ordered alphabetically
+ and there should normally not appear any additional symbols there.
+
+ For flang/ifx/ifort I each see 2 failures less (which are exactly the two
+ complete tests).
+
+ As a side note and since I mentioned C++ in the beginning: I also tried
+ the gdb.cp/completion.exp. The output seems a bit more reasonable,
+ mainly since C++ actually has a demangler in place and linkage symbols
+ do not appear in the output of complete. Still, with a poor enough
+ to-be-completed string one can easily produce similar results:
+
+ (gdb) complete p t
+ ...
+ p typeinfo name for void
+ p typeinfo name for void const*
+ p typeinfo name for void*
+ p typeinfo name for wchar_t
+ p typeinfo name for wchar_t const*
+ p typeinfo name for wchar_t*
+ p t *** List may be truncated, max-completions reached. ***
+ (gdb) p typeinfo name for void*
+ No symbol "typeinfo" in current context.
+ (gdb) complete p B
+ p BACK_SLASH
+ p BUF_FIRST
+ p BUF_LAST
+ ...
+ p Base
+ p Base::Base()
+ p Base::get_foo()
+ p bad_key_err
+ p buf
+ p buffer
+ p buffer_size
+ p buflen
+ p bufsize
+ p build_charclass.isra
+ (gdb) p bad_key_err
+ No symbol "bad_key_err" in current context.
+
+ (compiled with gcc/g++ and breaking at main).
+
+ This patch is only about making the referenced test more 'fair' for the
+ other compilers. Generally, I find the behavior of complete a bit
+ confusing and maybe one wants to change this at some point but this
+ would be a bigger task.
+
+2022-05-31 Nils-Christian Kempke <nils-christian.kempke@intel.com>
+
+ testsuite, fortran: fix info-types for intel compilers
+ This info-types.exp test case had a few issues that this patch fixes.
+
+ First, the emitted symbol character(kind=1)/character*1 (different
+ compilers use different naming converntions here) which is checkedin the
+ test is not actually expected given the test program. There is no
+ variable of that type in the test. Still, gfortran emits it for every
+ Fortran program there is. The reason is the way gfortran handles Fortran's
+ named main program. It generates a wrapper around the Fortran program
+ that is quite similar to a C main function. This C-like wrapper has
+ argc and argv arguments for command line argument passing and the argv
+ pointer type has a base type character(kind=1) DIE emitted at CU scope.
+
+ Given the program
+
+ program prog
+ end program prog
+
+ the degbug info gfortran emits looks somewhat like
+
+ <0><c>: Abbrev Number: 3 (DW_TAG_compile_unit)
+ ...
+ <1><2f>: Abbrev Number: 4 (DW_TAG_subprogram)
+ <30> DW_AT_external : 1
+ <30> DW_AT_name : (indirect string, ...): main
+ ...
+ <2><51>: Abbrev Number: 1 (DW_TAG_formal_parameter)
+ <52> DW_AT_name : (indirect string, ...): argc
+ ...
+ <2><5d>: Abbrev Number: 1 (DW_TAG_formal_parameter)
+ <5e> DW_AT_name : (indirect string, ...): argv
+ ...
+ <62> DW_AT_type : <0x77>
+ ...
+ <2><6a>: Abbrev Number: 0
+ ...
+ <1><77>: Abbrev Number: 6 (DW_TAG_pointer_type)
+ <78> DW_AT_byte_size : 8
+ <79> DW_AT_type : <0x7d>
+ <1><7d>: Abbrev Number: 2 (DW_TAG_base_type)
+ <7e> DW_AT_byte_size : 1
+ <7f> DW_AT_encoding : 8 (unsigned char)
+ <80> DW_AT_name : (indirect string, ...): character(kind=1)
+ <1><84>: Abbrev Number: 7 (DW_TAG_subprogram)
+ <85> DW_AT_name : (indirect string, ...): prog
+ ...
+
+ Ifx and flang do not emit any debug info for a wrapper main method so
+ the type is missing here. There was the possibility of actually adding
+ a character*1 type variable to the Fortran executable, but both, ifx and
+ gfortran chose to emit this variable's type as a DW_TAG_string_type of
+ length one (instead of a character(kind=1), or whatever the respective
+ compiler naming convention is). While string types are printed as
+ character*LENGHT in the fortran language part (e.g. when issuing a
+ 'ptype') they do not generate any symbols inside GDB. In read.c it says
+
+ /* These dies have a type, but processing them does not create
+ a symbol or recurse to process the children. Therefore we can
+ read them on-demand through read_type_die. */
+
+ So they did not add any output to 'info types'. Only flang did emit a
+ character type here.
+ As adding a type would have a) not solved the problem for ifx and would
+ have b) somehow hidden the curious behavior of gfortran, instead, the
+ check for this character type was chagened to optional with the
+ check_optional_entry to allow for the symbols's absence and to allow
+ flang and ifx to pass this test as well.
+
+ Second, the line checked for s1 was hardcoded as 37 in the test. Given
+ that the type is actually defined on line 41 (which is what is emitted by
+ ifx) it even seems wrong. The line check for s1 was changed to actually
+ check for 41 and a gfortran bug has been filed here
+
+ https://gcc.gnu.org/bugzilla/show_bug.cgi?id=105454
+
+ The test is now marked as xfail for gfortran.
+
+ Third, the whole test of checking for the 'Type s1' in info types seemed
+ questionable. The type s1 is declared iside the scope of the Fortran
+ program info_types_test. Its DIE however is emitted as a child of the
+ whole compilation unit making it visible outside of the program's scope.
+ The 'info types' command checks for types stored in the GLOBAL_BLOCK,
+ or STATIC_BLOCKm wgucm according to block.h
+
+ The GLOBAL_BLOCK contains all the symbols defined in this compilation
+ whose scope is the entire program linked together.
+ The STATIC_BLOCK contains all the symbols whose scope is the
+ entire compilation excluding other separate compilations.
+
+ so for gfortran, the type shows up in the output of 'info types'. For
+ flang and ifx on the other hand this is not the case. The two compilers
+ emit the type (correctly) as a child of the Fortran program, thus not
+ adding it to either, the GLOBAL_BLOCK nor the LOCAL_BLOCK. A bug has
+ been opened for the gfortran scoping issue:
+
+ https://gcc.gnu.org/bugzilla/show_bug.cgi?id=105454
+
+ While the most correct change might have been removing the check for s1,
+ the change made here was to only check for this type in case of gfortran
+ being used as the compiler, as this check also covers the declaration
+ line issue mentioned above. A comment was added to maybe remove this
+ check once the scoping issue is resolved (and it starts to fail with
+ newer gfortran versions). The one used to test these changes was 13.0.
+
+2022-05-31 Nils-Christian Kempke <nils-christian.kempke@intel.com>
+
+ testsuite/lib: add check_optional_entry for GDBInfoSymbols
+ There was already a similar functionality for the GDBInfoModuleSymbols.
+ This just extends the GDBInfoSymbols. We will use this feature in a
+ later commit to make a testcase less GNU specific and more flexible for
+ other compilers.
+
+ Namely, in gdb.fortran/info-types.exp currenlty
+ GDBInfoSymbols::check_entry is used to verify and test the output of the
+ info symbols command. The test, however was written with gfortran as a
+ basis and some of the tests are not fair with e.g. ifx and ifort as
+ they test for symbols that are not actually required to be emitted. The
+ lines
+ GDBInfoSymbols::check_entry "${srcfile}" "" "${character1}"
+ and
+ GDBInfoSymbols::check_entry "${srcfile}" "37" "Type s1;"
+
+ check for types that are either not used in the source file (character1)
+ or should not be emitted by the compiler at global scope (s1) thus no
+ appearing in the info symbols command. In order to fix this we will
+ later use the newly introduced check_optional_entry over check_entry.
+
+2022-05-31 Nils-Christian Kempke <nils-christian.kempke@intel.com>
+
+ testsuite, fortran: Add '-debug-parameters all' when using ifx/ifort
+ In order for ifx and ifort to emit all debug entries, even for unused
+ parameters in modules we have to define the '-debug-parameters all' flag.
+
+ This commit adds it to the ifx-*/ifort-* specific flags in gdb.exp.
+
+2022-05-31 Nils-Christian Kempke <nils-christian.kempke@intel.com>
+
+ testsuite, fortran: add compiler dependent types to dynamic-ptype-whatis
+ The test was earlier not using the compiler dependent type print system
+ in fortran.exp. I changed this. It should generally improve the test
+ performance for different compilers. For ifx and gfortran I do not see
+ any failures.
+
+2022-05-31 Nils-Christian Kempke <nils-christian.kempke@intel.com>
+
+ testsuite, fortran: add required external keyword
+ Currenlty, ifx/ifort cannot compile the given executable as it is not
+ valid Fortran. It is missing the external keyword on the
+ no_arg_subroutine. Gfortran compiles the example but this is actually
+ a bug and there is an open gcc ticket for this here:
+
+ https://gcc.gnu.org/bugzilla/show_bug.cgi?id=50377
+
+ Adding the keyword does not change the gfortran compiling of the example.
+ It will, however, prevent a future fail once 50377 has been addressed.
+
+2022-05-31 Nils-Christian Kempke <nils-christian.kempke@intel.com>
+
+ gdb/testsuite: disable charset.exp for intel compilers
+ The test specifically tests for the Fortran CHARACTER(KIND=4) which is
+ not available in ifx/ifort.
+
+ Since the other characters are also printed elsewhere, we disable this
+ test for the unsupported compilers.
+
+2022-05-31 Nils-Christian Kempke <nils-christian.kempke@intel.com>
+
+ gdb/testsuite: rename intel next gen c/cpp compilers
+ The name for icx and icpx in the testsuite was earlier set to 'intel-*'
+ by the compiler identification. This commit changes this to 'icx-*'.
+
+ Note, that currently these names are not used within the testsuite so no
+ tests have to be adapted here.
+
+2022-05-31 Cristian Sandu <cristian.sandu@intel.com>
+ Nils-Christian Kempke <nils-christian.kempke@intel.com>
+
+ gdb/testsuite: add Fortran compiler identification to GDB
+ This commit adds a separate Fortran compiler identification mechanism to
+ the testsuite, similar to the existing one for C/C++. Before this
+ change, the options and version for the Fortran compiler specified when
+ running the testsuite with F90_FOR_TARGET set, was detected via its
+ respective C compiler. So running the testsuite as
+
+ make check TEST=gdb.fortran/*.exp CC_FOR_TARGET=gcc F90_FOR_TARGET=ifx
+
+ or even
+
+ make check TEST=gdb.fortran/*.exp F90_FOR_TARGET=ifx
+
+ would use the gcc compiler inside the procedures get_compiler_info and
+ test_compiler_info to identify compiler flags and the compiler version.
+ This could sometimes lead to unpredictable outputs. It also limited
+ testsuite execution to combinations where C and Fortran compiler would
+ come from the same family of compiers (gcc/gfortran, icc/ifort, icx/ifx,
+ clang/flang ..). This commit enables GDB to detect C and Fortran
+ compilers independently of each other.
+
+ As most/nearly all Fortran compilers have a mechanism for preprocessing
+ files in a C like fashion we added the exact same meachnism that already
+ existed for C/CXX. We let GDB preprocess a file with the compilers
+ Fortran preprocessor and evaluate the preprocessor defined macros in that
+ file.
+
+ This enables GDB to properly run heterogeneous combinations of C and
+ Fortran compilers such as
+
+ CC_FOR_TARGET='gcc' and F90_FOR_TARGET='ifort'
+
+ or enables one to run the testsuite without specifying a C compiler as in
+
+ make check TESTS=gdb.fortran/*.exp F90_FOR_TARGET='ifx'
+ make check TESTS=gdb.fortran/*.exp F90_FOR_TARGET='flang'
+
+ On the other hand this also requires one to always specify a
+ identification mechanism for Fortran compilers in the compiler.F90 file.
+
+ We added identification for GFORTRAN, FLANG (CLASSIC and LLVM) IFX,
+ IFORT, and ARMFLANG for now.
+
+ Classic and LLVM flang were each tested with their latest releases on
+ their respective release pages. Both get recognized by the new compiler
+ identification and we introduced the two names flang-classic and
+ flang-llvm to distinguish the two. While LLVM flang is not quite mature
+ enough yet for running the testsuite we still thought it would be a good
+ idea to include it already. For this we added a case for the fortran_main
+ procedure. LLVM flang uses 'MAIN__' as opposed to classic flang which
+ uses 'MAIN_' here.
+
+ We did not have the possibility to test ARMFLANG - the versioning scheme
+ here was extracted from its latest online documentation.
+
+ We changed the test_compiler_info procedure to take another optional
+ argument, the language string, which will be passed though to the
+ get_compiler_info procedure. Passing 'f90' or 'c++' here will then
+ trigger the C++/Fortran compiler identification within
+ get_compiler_info. The latter procedure was extended to also handle
+ the 'f90' argument (similarly to the already existing 'c++' one).
+
+2022-05-31 Nils-Christian Kempke <nils-christian.kempke@intel.com>
+
+ gdb/testsuite: move getting_compiler_info to front of gdb_compile
+ The procedure gdb_compile queries its options via
+
+ [lsearch -exact $options getting_compiler_info]
+
+ to check whether or not it was called in with the option
+ getting_compiler_info. If it was called with this option it would
+ preprocess some test input to try and figure out the actual compiler
+ version of the compiler used. While doing this we cannot again try to
+ figure out the current compiler version via the 'getting_compiler_info'
+ option as this would cause infinite recursion. As some parts of the
+ procedure do recursively test for the compiler version to e.g. set
+ certain flags, at several places gdb_compile there are checks for the
+ getting_compiler_info option needed.
+
+ In the procedure, there was already a variable 'getting_compiler_info'
+ which was set to the result of the 'lsearch' query and used instead of
+ again and again looking for getting_compiler_info in the procedure
+ options. But, this variable was actually set too late within the code.
+ This lead to a mixture of querying 'getting_compiler_info' or
+ doing an lserach on the options passed to the procedure.
+
+ I found this inconsistent and instead moved the variable
+ getting_compiler_info to the front of the procedure. It is set to true
+ or false depending on whether or not the argument is found in the
+ procedure's options (just as before) and queried instead of doing an
+ lsearch on the procedure options in the rest of the procedure.
+
+2022-05-31 Felix Willgerodt <felix.willgerodt@intel.com>
+ Abdul Basit Ijaz <abdul.b.ijaz@intel.com>
+ Nils-Christian Kempke <nils-christian.kempke@intel.com>
+
+ gdb/testsuite: Fix fortran types for Intel compilers.
+ Newer Intel compilers emit their dwarf type name in a slightly different
+ format. Therefore, this needs adjustment to make more tests pass in the
+ Fortran testsuite.
+
+2022-05-31 Abdul Basit Ijaz <abdul.b.ijaz@intel.com>
+
+ gdb/testsuite: Use -module option for Intel Fortran compilers
+ The '-J' option is not supported in Intel compilers (ifx and ifort).
+ The Intel version of the flag is '-module' which serves the same purpose.
+
+2022-05-31 Nils-Christian Kempke <nils-christian.kempke@intel.com>
+
+ gdb/testsuite: remove F77_FOR_TARGET support
+ The last uses of the F77_FOR_TARGET via passing f77 to GDB's compile
+ procedure were removed in this commit
+
+ commit 0ecee54cfd04a60e7ca61ae07c72b20e21390257
+ Author: Tom Tromey <tromey@redhat.com>
+ Date: Wed Jun 29 17:50:47 2011 +0000
+
+ over 10 years ago. The last .f files in the testsuite by now are all
+ being compiled by passing 'f90' to the GDB compile, thus only actually
+ using F90_FOR_TARGET (array-element.f, block-data.f, subarray.f).
+ Gfortran in this case is backwards compatible with most f77 code as
+ claimed on gcc.gnu.org/fortran.
+
+ The reason we'd like to get rid of this now is, that we'll be
+ implementing a Fortran compiler identification mechanism, similar to the
+ C/Cpp existing ones. It would be using the Fortran preprocessor macro
+ defines to identify the Fortran compiler version at hand. We found it
+ inconsequent to only implement this for f90 but, on the other hand, f77
+ seems deprecated. So, with this commit we remove the remaining lines for
+ its support.
+
+2022-05-31 Pedro Alves <pedro@palves.net>
+
+ Improve clear command's documentation
+ Co-Authored-By: Eli Zaretskii <eliz@gnu.org>
+
+ Change-Id: I9440052fd28f795d6f7c93a4576beadd21f28885
+
+2022-05-31 Pedro Alves <pedro@palves.net>
+
+ Clarify why we unit test matching symbol names with 0xff characters
+ In the name matching unit tests in gdb/dwarf2/read.c, explain better
+ why we test symbols with \377 / 0xff characters (Latin1 'ÿ').
+
+ Change-Id: I517f13adfff2e4d3cd783fec1d744e2b26e18b8e
+
+2022-05-31 Pedro Alves <pedro@palves.net>
+
+ Improve break-range's documentation
+ Change-Id: Iac26e1d2e7d8dc8a7d9516e6bdcc5c3fc4af45c8
+
+ Explicitly mention yet-unloaded shared libraries in location spec examples
+ Change-Id: I05639ddb3bf620c7297b57ed286adc3aa926b7b6
+
+2022-05-31 Alan Modra <amodra@gmail.com>
+
+ sparc64 segfault in finish_dynamic_symbol
+ SYMBOL_REFERENCES_LOCAL can return true for undefined symbols. This
+ can result in a segfault when running sparc64 ld/testsuite/ld-vsb
+ tests that expect a failure.
+
+ * elfxx-sparc.c (_bfd_sparc_elf_finish_dynamic_symbol): Don't
+ access u.def.section on non-default visibility undefined symbol.
+
+2022-05-31 Alan Modra <amodra@gmail.com>
+
+ ia64 gas: Remove unnecessary init
+ The whole struct is cleared by alloc_record.
+
+ * config/tc-ia64.c (output_prologue, output_prologue_gr): Don't
+ zero r.record.r.mask.
+
+2022-05-31 Alan Modra <amodra@gmail.com>
+
+ v850_elf_set_note prototype
+ v850_elf_set_note is declared using an unsigned int note param in
+ elf32-v850.h but defined with enum c850_notes note in elf32-v850.c.
+ Current mainline gcc is warning about this. Huh.
+
+ * elf32-v850.c (v850_elf_set_note): Make "note" param an
+ unsigned int.
+
+2022-05-31 Alan Modra <amodra@gmail.com>
+
+ Import libiberty from gcc
+ PR 29200
+ include/
+ * ansidecl.h,
+ * demangle.h: Import from gcc.
+ libiberty/
+ * cp-demangle.c,
+ * testsuite/demangle-expected: Import from gcc.
+
+2022-05-31 Andrew Burgess <aburgess@redhat.com>
+
+ gdb/testsuite: resolve duplicate test name in gdb.trace/signal.exp
+ Spotted a duplicate test name in gdb.trace/signal.exp, resolved in
+ this commit by making use of 'with_test_prefix'.
+
+2022-05-31 Alan Modra <amodra@gmail.com>
+
+ Ajdust more tests for opcodes/i386: remove trailing whitespace
+ git commit 202be274a4 also missed adjusting a few testsuite files.
+ This fixes
+ i686-vxworks +FAIL: VxWorks shared library test 1
+ i686-vxworks +FAIL: VxWorks executable test 1 (dynamic)
+
+2022-05-31 Alan Modra <amodra@gmail.com>
+
+ Trailing spaces in objdump -r header
+ git commit 202be274a4 went a little wild in removing trailing spaces
+ in gas/testsuite/gas/i386/{secidx.d,secrel.d}, causing
+ x86_64-w64-mingw32 +FAIL: i386 secrel reloc
+ x86_64-w64-mingw32 +FAIL: i386 secidx reloc
+
+ I could have just replaced the trailing space, but let's fix the
+ objdump output instead. Touches lots of testsuite files.
+
+2022-05-31 GDB Administrator <gdbadmin@sourceware.org>
+
+ Automatic date update in version.in
+
+2022-05-30 Simon Marchi <simon.marchi@efficios.com>
+
+ gdb/testsuite: fix gdb.trace/signal.exp on x86
+ Patch
+
+ 202be274a41a ("opcodes/i386: remove trailing whitespace from insns with zero operands")
+
+ causes this regression:
+
+ FAIL: gdb.trace/signal.exp: find syscall insn in kill
+
+ It's because the test still expects to match a whitespace after the
+ instruction, which the patch mentioned above removed. Remove the
+ whitespaces for the regexp.
+
+ Change-Id: Ie194273cc942bfd91332d4035f6eec55b7d3a428
+
+2022-05-30 Pedro Alves <pedro@palves.net>
+
+ gdb/manual: Introduce location specs
+ The current "Specify Location" section of the GDB manual starts with:
+
+ "Several @value{GDBN} commands accept arguments that specify a location
+ of your program's code."
+
+ And then, such commands are documented as taking a "location"
+ argument. For example, here's a representative subset:
+
+ @item break @var{location}
+ @item clear @var{location}
+ @item until @var{location}
+ @item list @var{location}
+ @item edit @var{location}
+ @itemx info line @var{location}
+ @item info macros @var{location}
+ @item trace @var{location}
+ @item info scope @var{location}
+ @item maint agent @r{[}-at @var{location}@r{,}@r{]} @var{expression}
+
+ The issue here is that "location" isn't really correct for most of
+ these commands. Instead, the "location" argument is really a
+ placeholder that represent an umbrella term for all of the
+ "linespecs", "explicit location", and "address location" input
+ formats. GDB parses these and then finds the actual code locations
+ (plural) in the program that match. For example, a "location"
+ specified like "-function func" will actually match all the code
+ locations in the program that correspond to the address/file/lineno of
+ all the functions named "func" in all the loaded programs and shared
+ libraries of all the inferiors. A location specified like "-function
+ func -label lab" matches all the addresses of C labels named "lab" in
+ all functions named "func". Etc.
+
+ This means that several of the commands that claim they accept a
+ "location", actually end up working with multiple locations, and the
+ manual doesn't explain that all that well. In some cases, the command
+ will work with all the resolved locations. In other cases, the
+ command aborts with an error if the location specification resolves to
+ multiple locations in the program. In other cases, GDB just
+ arbitrarily and silently picks whatever is the first resolved code
+ location (which sounds like should be improved).
+
+ To clarify this, I propose we use the term "Location Specification",
+ with shorthand "locaction spec", when we're talking about the user
+ input, the argument or arguments that is/are passed to commands to
+ instruct GDB how to find locations of interest. This is distinct from
+ the actual code locations in the program, which are what GDB finds
+ based on the user-specified location spec. Then use "location
+ specification or the shorter "location spec" thoughout instead of
+ "location" when we're talking about the user input.
+
+ Thus, this commit does the following:
+
+ - renames the "Specify Location" section of the manual to "Location
+ Specifications".
+
+ - It then introduces the term "Location Specification", with
+ corresponding shorthand "location spec", as something distinct from
+ an actual code location in the program. It explains what a concrete
+ code location is. It explains that a location specification may be
+ incomplete, and that may match multiple code locations in the
+ program, or no code location at all. It gives examples. Some
+ pre-existing examples were moved from the "Set Breaks" section, and
+ a few new ones that didn't exist yet were added. I think it is
+ better to have these centralized in this "Location Specification"
+ section, since all the other commands that accept a location spec
+ have an xref that points there.
+
+ - Goes through the manual, and where "@var{location}" was used for a
+ command argument, updated it to say "@var{locspec}" instead. At the
+ same time, tweaks the description of the affected commands to
+ describe what happens when the location spec resolves to more than
+ one location. Most commands just did not say anything about that.
+
+ One command -- "maint agent -at @var{location}" -- currently says it
+ accepts a "location", suggesting it can accept address and explicit
+ locations too, but that's incorrect. In reality, it only accepts
+ linespecs, so fix it accordingly.
+
+ One MI command -- "-trace-find line" -- currently says it accepts a
+ "line specification", but it can accept address and explicit
+ locations too, so fix it accordingly.
+
+ Special thanks goes to Eli Zaretskii for reviews and rewording
+ suggestions.
+
+ Change-Id: Ic42ad8565e79ca67bfebb22cbb4794ea816fd08b
+
+2022-05-30 Luis Machado <luis.machado@arm.com>
+
+ Move 64-bit BFD files from ALL_TARGET_OBS to ALL_64_TARGET_OBS
+ Doing a 32-bit build with "--enable-targets=all --disable-sim" fails to link
+ properly.
+
+ --
+
+ loongarch-tdep.o: In function `loongarch_gdbarch_init':
+ binutils-gdb/gdb/loongarch-tdep.c:443: undefined reference to `loongarch_r_normal_name'
+ loongarch-tdep.o: In function `loongarch_fetch_instruction':
+ binutils-gdb/gdb/loongarch-tdep.c:37: undefined reference to `loongarch_insn_length'
+ loongarch-tdep.o: In function `loongarch_scan_prologue(gdbarch*, unsigned long long, unsigned long long, frame_info*, trad_frame_cache*) [clone .isra.4]':
+ binutils-gdb/gdb/loongarch-tdep.c:87: undefined reference to `loongarch_insn_length'
+ binutils-gdb/gdb/loongarch-tdep.c:88: undefined reference to `loongarch_decode_imm'
+ binutils-gdb/gdb/loongarch-tdep.c:89: undefined reference to `loongarch_decode_imm'
+ binutils-gdb/gdb/loongarch-tdep.c:90: undefined reference to `loongarch_decode_imm'
+ binutils-gdb/gdb/loongarch-tdep.c:91: undefined reference to `loongarch_decode_imm'
+ binutils-gdb/gdb/loongarch-tdep.c:92: undefined reference to `loongarch_decode_imm'
+
+ --
+
+ Given the list of 64-bit BFD files in
+ opcodes/Makefile.am:TARGET64_LIBOPCODES_CFILES, it looks like GDB's
+ ALL_TARGET_OBS list is including files that should be included in
+ ALL_64_TARGET_OBS instead.
+
+ This patch accomplishes this and enables a 32-bit build with
+ "--enable-targets=all --disable-sim" to complete.
+
+ Moving the bpf, tilegx and loongarch files to the correct list means GDB can
+ find the correct disassembler function instead of finding a null pointer.
+
+ We still need the "--disable-sim" switch (or "--enable-64-bit-bfd") to
+ make a 32-bit build with "--enable-targets=all" complete correctly
+
+2022-05-30 Luis Machado <luis.machado@arm.com>
+
+ Fix failing test for armeb-gnu-eabi
+ The following test fails on the armeb-gnu-eabi target:
+
+ FAIL: Unwind information for Armv8.1-M.Mainline PACBTI extension
+
+ This patch adjusts the expected output for big endian.
+
+2022-05-30 Alan Modra <amodra@gmail.com>
+
+ Use a union to avoid casts in bfd/doc/chew.c
+ This fixes -Wpedantic warnings in chew.c. Conversion between function
+ and object pointers is not guaranteed. They can even be different
+ sizes, not that we're likely to encounter build machines like that
+ nowadays.
+
+ PR 29194
+ * doc/chew.c (pcu): New union typedef.
+ (dict_type, pc): Use it here. Adjust uses of pc.
+ (add_to_definition): Make "word" param a pcu. Adjust all uses
+ of function.
+ (stinst_type): Delete.
+
+2022-05-30 Alan Modra <amodra@gmail.com>
+
+ use libiberty xmalloc in bfd/doc/chew.c
+ Catch out of memory.
+
+ * doc/chew.c: Include libibery.h.
+ (init_string_with_size, nextword): Replace malloc with xmalloc.
+ (newentry, add_to_definition): Likewise.
+ (catchar, catbuf): Replace realloc with xrealloc.
+ (add_intrinsic): Replace strdup with xstrdup.
+ * doc/local.mk (LIBIBERTY): Define.
+ (chew): Link against libiberty.
+ * Makefile.in: Regenerate.
+
+2022-05-30 Alan Modra <amodra@gmail.com>
+
+ Update K&R functions in bfd/doc/chew.c
+ * doc/chew.c: Update function definitions to ISO C, remove
+ now unnecessary prototypes.
+
+2022-05-30 Alan Modra <amodra@gmail.com>
+
+ Reorganise bfd/doc/chew.c a little
+ This also removes some unused variables, and deletes support for the
+ "var" keyword which isn't used and was broken. (No means to set
+ variables, and add_var used push_number inconsistent with its use
+ elsewhere.)
+
+ * doc/chew.c: Move typedefs before variables, variables before
+ functions.
+ (die): Move earlier.
+ (word_type, sstack, ssp): Delete.
+ (dict_type): Delete var field.
+ (add_var): Delete.
+ (compile): Remove "var" support.
+
+2022-05-30 jiawei <jiawei@iscas.ac.cn>
+
+ RISC-V: Add zhinx extension supports.
+ The zhinx extension is a sub-extension in zfinx, corresponding to
+ zfh extension but use GPRs instead of FPRs.
+
+ This patch expanded the zfh insn class define, since zfh and zhinx
+ use the same opcodes, thanks for Nelson's works.
+
+ changelog in V2: Add missing classes of 'zfh' and 'zhinx' in
+ "riscv_multi_subset_supports_ext".
+
+ bfd/ChangeLog:
+
+ * elfxx-riscv.c (riscv_multi_subset_supports): New extensions.
+ (riscv_multi_subset_supports_ext): New extensions.
+
+ gas/ChangeLog:
+
+ * testsuite/gas/riscv/fp-zhinx-insns.d: New test.
+ * testsuite/gas/riscv/fp-zhinx-insns.s: New test.
+
+ include/ChangeLog:
+
+ * opcode/riscv.h (enum riscv_insn_class): New INSN classes.
+
+ opcodes/ChangeLog:
+
+ * riscv-opc.c: Modify INSN_CLASS.
+
+2022-05-30 GDB Administrator <gdbadmin@sourceware.org>
+
+ Automatic date update in version.in
+
+2022-05-29 GDB Administrator <gdbadmin@sourceware.org>
+
+ Automatic date update in version.in
+
+2022-05-28 Andrew Burgess <aburgess@redhat.com>
+
+ gdb/python: improve formatting of help text for user defined commands
+ Consider this command defined in Python (in the file test-cmd.py):
+
+ class test_cmd (gdb.Command):
+ """
+ This is the first line.
+ Indented second line.
+ This is the third line.
+ """
+
+ def __init__ (self):
+ super ().__init__ ("test-cmd", gdb.COMMAND_OBSCURE)
+
+ def invoke (self, arg, from_tty):
+ print ("In test-cmd")
+
+ test_cmd()
+
+ Now, within a GDB session:
+
+ (gdb) source test-cmd.py
+ (gdb) help test-cmd
+
+ This is the first line.
+ Indented second line.
+ This is the third line.
+
+ (gdb)
+
+ I think there's three things wrong here:
+
+ 1. The leading blank line,
+ 2. The trailing blank line, and
+ 3. Every line is indented from the left edge slightly.
+
+ The problem of course, is that GDB is using the Python doc string
+ verbatim as its help text. While the user has formatted the help text
+ so that it appears clear within the .py file, this means that the text
+ appear less well formatted when displayed in the "help" output.
+
+ The same problem can be observed for gdb.Parameter objects in their
+ set/show output.
+
+ In this commit I aim to improve the "help" output for commands and
+ parameters.
+
+ To do this I have added gdbpy_fix_doc_string_indentation, a new
+ function that rewrites the doc string text following the following
+ rules:
+
+ 1. Leading blank lines are removed,
+ 2. Trailing blank lines are removed, and
+ 3. Leading whitespace is removed in a "smart" way such that the
+ relative indentation of lines is retained.
+
+ With this commit in place the above example now looks like this:
+
+ (gdb) source ~/tmp/test-cmd.py
+ (gdb) help test-cmd
+ This is the first line.
+ Indented second line.
+ This is the third line.
+ (gdb)
+
+ Which I think is much neater. Notice that the indentation of the
+ second line is retained. Any blank lines within the help text (not
+ leading or trailing) will be retained.
+
+ I've added a NEWS entry to note that there has been a change in
+ behaviour, but I didn't update the manual. The existing manual is
+ suitably vague about how the doc string is used, so I think the new
+ behaviour is covered just as well by the existing text.
+
+2022-05-28 Andrew Burgess <aburgess@redhat.com>
+
+ gdb: use gdb::unique_xmalloc_ptr<char> for docs in cmdpy_init
+ Make use of gdb::unique_xmalloc_ptr<char> to hold the documentation
+ string in cmdpy_init (when creating a custom GDB command in Python).
+ I think this is all pretty straight forward, the only slight weirdness
+ is the removal of the call to free toward the end of this function.
+
+ Prior to this commit, if an exception was thrown after the GDB command
+ was created then we would (I think) end up freeing the documentation
+ string even though the command would remain registered with GDB, which
+ would surely lead to undefined behaviour.
+
+ After this commit we release the doc string at the point that we hand
+ it over to the command creation routines. If we throw _after_ the
+ command has been created within GDB then the doc string will be left
+ live. If we throw during the command creation itself (either from
+ add_prefix_cmd or add_cmd) then it is up to those functions to free
+ the doc string (I suspect we don't, but I think in general the
+ commands are pretty bad at cleaning up after themselves, so I don't
+ think this is a huge problem).
+
+2022-05-28 Vladimir Mezentsev <vladimir.mezentsev@oracle.com>
+
+ gprofng: fix build with -mx32
+ gprofng/ChangeLog
+ 2022-05-27 Vladimir Mezentsev <vladimir.mezentsev@oracle.com>
+
+ PR gprofng/28983
+ PR gprofng/29143
+ * src/Experiment.cc (write_header): Fix argument for ctime.
+ Fix -Wformat= warnings.
+ * src/Dbe.cc: Likewise.
+ * src/DwarfLib.h: Fix [-Wsign-compare] warnings.
+ * src/Experiment.h: Likewise.
+ * src/ipc.cc: Fix -Wformat= warnings.
+
+2022-05-28 GDB Administrator <gdbadmin@sourceware.org>
+
+ Automatic date update in version.in
+
+2022-05-27 Tom Tromey <tom@tromey.com>
+
+ Fix crash with "maint print arc"
+ Luis noticed that "maint print arc" would crash, because the command
+ handler did not find "show" in the command name, violating an
+ invariant. This patch fixes the bug by changing the registration to
+ use add_basic_prefix_cmd instead.
+
+2022-05-27 Andrew Burgess <aburgess@redhat.com>
+
+ opcodes/i386: remove trailing whitespace from insns with zero operands
+ While working on another patch[1] I had need to touch this code in
+ i386-dis.c:
+
+ ins->obufp = ins->mnemonicendp;
+ for (i = strlen (ins->obuf) + prefix_length; i < 6; i++)
+ oappend (ins, " ");
+ oappend (ins, " ");
+ (*ins->info->fprintf_styled_func)
+ (ins->info->stream, dis_style_mnemonic, "%s", ins->obuf);
+
+ What this code does is add whitespace after the instruction mnemonic
+ and before the instruction operands.
+
+ The problem I ran into when working on this code can be seen by
+ assembling this input file:
+
+ .text
+ nop
+ retq
+
+ Now, when I disassemble, here's the output. I've replaced trailing
+ whitespace with '_' so that the issue is clearer:
+
+ Disassembly of section .text:
+
+ 0000000000000000 <.text>:
+ 0: 90 nop
+ 1: c3 retq___
+
+ Notice that there's no trailing whitespace after 'nop', but there are
+ three spaces after 'retq'!
+
+ What happens is that instruction mnemonics are emitted into a buffer
+ instr_info::obuf, then instr_info::mnemonicendp is setup to point to
+ the '\0' character at the end of the mnemonic.
+
+ When we emit the whitespace, this is then added starting at the
+ mnemonicendp position. Lets consider 'retq', first the buffer is
+ setup like this:
+
+ 'r' 'e' 't' 'q' '\0'
+
+ Then we add whitespace characters at the '\0', converting the buffer
+ to this:
+
+ 'r' 'e' 't' 'q' ' ' ' ' ' ' '\0'
+
+ However, 'nop' is actually an alias for 'xchg %rax,%rax', so,
+ initially, the buffer is setup like this:
+
+ 'x' 'c' 'h' 'g' '\0'
+
+ Then in NOP_Fixup we spot that we have an instruction that is an alias
+ for 'nop', and adjust the buffer to this:
+
+ 'n' 'o' 'p' '\0' '\0'
+
+ The second '\0' is left over from the original buffer contents.
+ However, when we rewrite the buffer, we don't afjust mnemonicendp,
+ which still points at the second '\0' character.
+
+ Now, when we insert whitespace we get:
+
+ 'n' 'o' 'p' '\0' ' ' ' ' ' ' ' ' '\0'
+
+ Notice the whitespace is inserted after the first '\0', so, when we
+ print the buffer, the whitespace is not printed.
+
+ The fix for this is pretty easy, I can change NOP_Fixup to adjust
+ mnemonicendp, but now a bunch of tests start failing, we now produce
+ whitespace after the 'nop', which the tests don't expect.
+
+ So, I could update the tests to expect the whitespace....
+
+ ...except I'm not a fan of trailing whitespace, so I'd really rather
+ not.
+
+ Turns out, I can pretty easily update the whitespace emitting code to
+ spot instructions that have zero operands and just not emit any
+ whitespace in this case. So this is what I've done.
+
+ I've left in the fix for NOP_Fixup, I think updating mnemonicendp is
+ probably a good thing, though this is not really required any more.
+
+ I've then updated all the tests that I saw failing to adjust the
+ expected patterns to account for the change in whitespace.
+
+ [1] https://sourceware.org/pipermail/binutils/2022-April/120610.html
+
+2022-05-27 Alan Modra <amodra@gmail.com>
+
+ Replace bfd_hostptr_t with uintptr_t
+ bfd_hostptr_t is defined as a type large enough to hold either a long
+ or a pointer. It mostly appears in the coff backend code in casts.
+ include/coff/internal.h struct internal_syment and union
+ internal_auxent have the only uses in data structures, where
+ comparison with include/coff/external.h and other code reveals that
+ the type only needs to be large enough for a 32-bit integer or a
+ pointer. That should mean replacing with uintptr_t is OK.
+
+ Remove much of BFD_HOST configury
+ This patch removes the definition of bfd_uint64_t and bfd_int64_t as
+ well as most BFD_HOST_* which are now unused.
+
+ Remove use of bfd_uint64_t and similar
+ Requiring C99 means that uses of bfd_uint64_t can be replaced with
+ uint64_t, and similarly for bfd_int64_t, BFD_HOST_U_64_BIT, and
+ BFD_HOST_64_BIT. This patch does that, removes #ifdef BFD_HOST_*
+ and tidies a few places that print 64-bit values.
+
+2022-05-27 Vladimir Mezentsev <vladimir.mezentsev@oracle.com>
+
+ gprofng: fix build with --disable-shared
+ gprofng/ChangeLog
+ 2022-05-26 Vladimir Mezentsev <vladimir.mezentsev@oracle.com>
+
+ * libcollector/configure.ac: Use AC_MSG_WARN instead of AC_MSG_ERROR
+ * libcollector/configure: Rebuild.
+
+2022-05-27 Jan Beulich <jbeulich@suse.com>
+
+ x86/Intel: allow MASM representation of embedded rounding / SAE
+ MASM doesn't support the separate operand form; the modifier belongs
+ after the instruction instead. Accept this form alongside the original
+ (now legacy) one. Short of having access to a MASM version to actually
+ check in how far "after the instruction" is a precise statement in their
+ documentation, allow both that and the SDM mandated form where the
+ modifier is on the last register operand (with a possible immediate
+ operand following).
+
+ Sadly the split out function, at least for the time being, needs to cast
+ away constness at some point, as the two callers disagree in this
+ regard.
+
+ Adjust some, but not all of the testcases.
+
+2022-05-27 Jan Beulich <jbeulich@suse.com>
+
+ x86: re-work AVX512 embedded rounding / SAE
+ As a preparatory step to allowing proper non-operand forms of specifying
+ embedded rounding / SAE, convert the internal representation to non-
+ operand form. While retaining properties (and in a few cases perhaps
+ providing more meaningful diagnostics), this means doing away with a few
+ hundred standalone templates, thus - as a nice side effect - reducing
+ memory consumption / cache occupancy.
+
+ x86/Intel: adjust representation of embedded rounding / SAE
+ MASM doesn't consider {sae} and alike a separate operand; it is attached
+ to the last register operand instead, just like spelled out by the SDM.
+ Make the disassembler follow this first, before also adjusting the
+ assembler (such that it'll be easy to see that the assembler change
+ doesn't alter generated code).
+
+2022-05-27 Jan Beulich <jbeulich@suse.com>
+
+ x86/Intel: allow MASM representation of embedded broadcast
+ MASM doesn't support the {1to<n>} form; DWORD BCST (paralleling
+ DWORD PTR) and alike are to be used there instead. Accept these forms
+ alongside the original (now legacy) ones.
+
+ Acceptance of the original {1to<n>} operand suffix is retained both for
+ backwards compatibility and to disambiguate VFPCLASSP{S,D,H} and vector
+ conversions with shrinking element sizes. I have no insight (yet) into
+ how MASM expects those to be disambiguated.
+
+ Adjust some, but not all of the testcases.
+
+2022-05-27 Jan Beulich <jbeulich@suse.com>
+
+ x86/Intel: adjust representation of embedded broadcast
+ MASM doesn't support the {1to<n>} form; DWORD BCST (paralleling
+ DWORD PTR) and alike are to be used there instead. Make the disassembler
+ follow this first, before also adjusting the assembler (such that it'll
+ be easy to see that the assembler change doesn't alter generated code).
+
+ For VFPCLASSP{S,D,H} and vector conversions with shrinking element sizes
+ the original {1to<n>} operand suffix is retained, to disambiguate
+ output. I have no insight (yet) into how MASM expects those to be
+ disambiguated.
+
+2022-05-27 Vladimir Mezentsev <vladimir.mezentsev@oracle.com>
+
+ gprofng: fix build with -mx32
+ gprofng/ChangeLog
+ 2022-05-26 Vladimir Mezentsev <vladimir.mezentsev@oracle.com>
+
+ PR gprofng/28983
+ * libcollector/libcol_util.h (__collector_getsp, __collector_getfp,
+ __collector_getpc): Adapt for build with -mx32
+ * libcollector/heaptrace.c: Fix -Wpointer-to-int-cast warnings.
+ * libcollector/hwprofile.h: Likewise.
+ * libcollector/mmaptrace.c: Likewise.
+ * libcollector/synctrace.c: Likewise.
+ * libcollector/unwind.c: Likewise.
+
+2022-05-27 GDB Administrator <gdbadmin@sourceware.org>
+
+ Automatic date update in version.in
+
+2022-05-27 Hans-Peter Nilsson <hp@axis.com>
+
+ ld: cris*-elf: Default to --no-warn-rwx-segment
+ ld:
+ configure.tgt (cris-*-*, crisv32-*-* sans *-aout and *-linux): Unless
+ specified through the --enable-* -option, default to
+ --no-warn-rwx-segment.
+
+ Change-Id: I846bcd3e6762da807b17215a9fe337461ea0d710
+
+2022-05-27 Hans-Peter Nilsson <hp@axis.com>
+
+ cris: bfd: Correct default to no execstack
+ In the now-historical CRIS glibc port, the default stack permission
+ was no-exec as in "#define DEFAULT_STACK_PERMS (PF_R|PF_W)", and the
+ gcc port only emits the executable-stack marker when needed; when
+ emitting code needing it. In other words, the binutils setting
+ mismatches. It doesn't matter much, except being confusing and
+ defaulting to "off" is more sane.
+
+ ld:
+
+ * testsuite/ld-elf/elf.exp (target_defaults_to_execstack): Switch to 0
+ for cris*-*-*.
+
+ bfd:
+ * elf32-cris.c (elf_backend_default_execstack): Define to 0.
+
+ Change-Id: I52f37598f119b19111c7a6546c00a627fca0f396
+
+2022-05-26 John Baldwin <jhb@FreeBSD.org>
+
+ aarch64-fbsd-nat: Move definition of debug_regs_probed under HAVE_DBREG.
+ This fixes the build on older FreeBSD systems without support for
+ hardware breakpoints/watchpoints.
+
+2022-05-26 Lancelot SIX <lancelot.six@amd.com>
+
+ gdb: Change psymbol_functions::require_partial_symbols to partial_symbols
+ The previous patch ensured that partial symbols are read before calling
+ most of the quick_function's methods.
+
+ The psymbol_functions class has the require_partial_symbols method which
+ serves this exact purpose, and does not need to do it anymore.
+
+ This patch renames this method to partial_symbols and makes it an accessor
+ which asserts that partial symbols have been read at this point.
+
+ Regression tested on x86_64-linux.
+
+2022-05-26 Lancelot SIX <lancelot.six@amd.com>
+
+ gdb: Require psymtab before calling quick_functions in objfile
+ The recent DWARF indexer rewrite introduced a regression when debugging
+ a forking program.
+
+ Here is a way to reproduce the issue (there might be other ways, but one
+ is enough and this one mimics the situation we encountered). Consider a
+ program which forks, and the child loads a shared library and calls a
+ function in this shared library:
+
+ if (fork () == 0)
+ {
+ void *solib = dlopen (some_solib, RTLD_NOW);
+ void (*foo) () = dlsym (some_solib, "foo");
+ foo ();
+ }
+
+ Suppose that this program is compiled without debug info, but the shared
+ library it loads has debug info enabled.
+
+ When debugging such program with the following options:
+
+ - set detach-on-fork off
+ - set follow-fork-mode child
+
+ we see something like:
+
+ (gdb) b foo
+ Function "foo" not defined.
+ Make breakpoint pending on future shared library load? (y or [n]) y
+ Breakpoint 1 (foo) pending.
+ (gdb) run
+ Starting program: a.out
+ [Attaching after process 19720 fork to child process 19723]
+ [New inferior 2 (process 19723)]
+ [Switching to process 19723]
+
+ Thread 2.1 "a.out" hit Breakpoint 1, 0x00007ffff7fc3101 in foo () from .../libfoo.so
+ (gdb) list
+
+ Fatal signal: Segmentation fault
+ ----- Backtrace -----
+ 0x55a278f77d76 gdb_internal_backtrace_1
+ ../../gdb/bt-utils.c:122
+ 0x55a278f77f83 _Z22gdb_internal_backtracev
+ ../../gdb/bt-utils.c:168
+ 0x55a27940b83b handle_fatal_signal
+ ../../gdb/event-top.c:914
+ 0x55a27940bbb1 handle_sigsegv
+ ../../gdb/event-top.c:987
+ 0x7effec0343bf ???
+ /build/glibc-sMfBJT/glibc-2.31/nptl/../sysdeps/unix/sysv/linux/x86_64/sigaction.c:0
+ 0x55a27924c9d3 _ZNKSt15__uniq_ptr_implI18dwarf2_per_cu_data26dwarf2_per_cu_data_deleterE6_M_ptrEv
+ /usr/include/c++/9/bits/unique_ptr.h:154
+ 0x55a279248bc9 _ZNKSt10unique_ptrI18dwarf2_per_cu_data26dwarf2_per_cu_data_deleterE3getEv
+ /usr/include/c++/9/bits/unique_ptr.h:361
+ 0x55a2792ae718 _ZN27dwarf2_base_index_functions23find_last_source_symtabEP7objfile
+ ../../gdb/dwarf2/read.c:3164
+ 0x55a279afb93e _ZN7objfile23find_last_source_symtabEv
+ ../../gdb/symfile-debug.c:139
+ 0x55a279aa3040 _Z20select_source_symtabP6symtab
+ ../../gdb/source.c:365
+ 0x55a279aa22a1 _Z34set_default_source_symtab_and_linev
+ ../../gdb/source.c:268
+ 0x55a27903c44c list_command
+ ../../gdb/cli/cli-cmds.c:1185
+ 0x55a279051233 do_simple_func
+ ../../gdb/cli/cli-decode.c:95
+ 0x55a27905f221 _Z8cmd_funcP16cmd_list_elementPKci
+ ../../gdb/cli/cli-decode.c:2514
+ 0x55a279c3b0ba _Z15execute_commandPKci
+ ../../gdb/top.c:660
+ 0x55a27940a6c3 _Z15command_handlerPKc
+ ../../gdb/event-top.c:598
+ 0x55a27940b032 _Z20command_line_handlerOSt10unique_ptrIcN3gdb13xfree_deleterIcEEE
+ ../../gdb/event-top.c:797
+ 0x55a279caf401 tui_command_line_handler
+ ../../gdb/tui/tui-interp.c:278
+ 0x55a279409098 gdb_rl_callback_handler
+ ../../gdb/event-top.c:230
+ 0x55a279ed5df2 rl_callback_read_char
+ ../../../readline/readline/callback.c:281
+ 0x55a279408bd8 gdb_rl_callback_read_char_wrapper_noexcept
+ ../../gdb/event-top.c:188
+ 0x55a279408de7 gdb_rl_callback_read_char_wrapper
+ ../../gdb/event-top.c:205
+ 0x55a27940a061 _Z19stdin_event_handleriPv
+ ../../gdb/event-top.c:525
+ 0x55a27a23771e handle_file_event
+ ../../gdbsupport/event-loop.cc:574
+ 0x55a27a237f5f gdb_wait_for_event
+ ../../gdbsupport/event-loop.cc:700
+ 0x55a27a235d81 _Z16gdb_do_one_eventv
+ ../../gdbsupport/event-loop.cc:237
+ 0x55a2796c2ef0 start_event_loop
+ ../../gdb/main.c:418
+ 0x55a2796c3217 captured_command_loop
+ ../../gdb/main.c:478
+ 0x55a2796c717b captured_main
+ ../../gdb/main.c:1340
+ 0x55a2796c7217 _Z8gdb_mainP18captured_main_args
+ ../../gdb/main.c:1355
+ 0x55a278d0b381 main
+ ../../gdb/gdb.c:32
+ ---------------------
+ A fatal error internal to GDB has been detected, further
+ debugging is not possible. GDB will now terminate.
+
+ This is a bug, please report it. For instructions, see:
+ <https://www.gnu.org/software/gdb/bugs/>.
+
+ The first issue observed is in the message printed when hitting the
+ breakpoint. It says that there was a break in the .so file as if there
+ was no debug info associated with it, but there is. Later, if we try to
+ display the source where the execution stopped, we have a segfault.
+
+ Note that not having the debug info on the main binary is not strictly
+ required to encounter some issues, it only is to encounter the segfault.
+ If the main binary has debug information, GDB shows some source form the
+ main binary, unrelated to where we stopped.
+
+ The core of the issue is that GDB never loads the psymtab for the
+ library. It is not loaded when we first see the .so because in case of
+ detach-on-fork off, follow-fork-mode child, infrun.c sets
+ child_inf->symfile_flags = SYMFILE_NO_READ to delay the psymtab loading
+ as much as possible. If we compare to what was done to handle this
+ before the new indexer was activated, the psymatb construction for the
+ shared library was done under
+ psymbol_functions::expand_symtabs_matching:
+
+ bool
+ psymbol_functions::expand_symtabs_matching (...)
+ {
+ for (partial_symtab *ps : require_partial_symbols (objfile))
+ ...
+ }
+
+ The new indexer's expand_symtabs_matching callback does not have a call
+ to the objfile's require_partial_symbols, so if the partial symbol table
+ is not loaded at this point, there is no mechanism to fix this.
+
+ Instead of requiring each implementation of the quick_functions to check
+ that partial symbols have been read, I think it is safer to enforce this
+ when calling the quick functions. The general pattern for calling the
+ quick functions is:
+
+ for (auto *iter : qf)
+ iter->the_actual_method_call (...)
+
+ This patch proposes to wrap the access of the `qf` field with an accessor
+ which ensures that partial symbols have been read before iterating:
+ qf_require_partial_symbols. All calls to quick functions are updated
+ except:
+
+ - quick_functions::dump
+ - quick_functions::read_partial_symbols (from
+ objfile::require_partial_symbols)
+ - quick_functions::can_lazily_read_symbols and quick_functions::has_symbols
+ (from objfile::has_partial_symbols)
+
+ Regression tested on x86_64-gnu-linux.
+
+ Change-Id: I39a13a937fdbaae613a5cf68864b021000554546
+
+2022-05-26 Tom Tromey <tom@tromey.com>
+
+ Fix crash in new DWARF indexer
+ PR gdb/29128 points out a crash in the new DWARF index code. This
+ happens if the aranges for a CU claims a PC, but the symtab that is
+ created during CU expansion does not actually contain the PC. This
+ can only occur due to bad debuginfo, but at the same time, gdb should
+ not crash.
+
+ This patch fixes the bug and further merges some code into
+ dwarf2_base_index_functions. This merger helps prevent the same issue
+ from arising from the other index implementations.
+
+ Bug: https://sourceware.org/bugzilla/show_bug.cgi?id=29128
+
+2022-05-26 Tom Tromey <tromey@adacore.com>
+
+ Finalize each cooked index separately
+ After DWARF has been scanned, the cooked index code does a
+ "finalization" step in a worker thread. This step combines all the
+ index entries into a single master list, canonicalizes C++ names, and
+ splits Ada names to synthesize package names.
+
+ While this step is run in the background, gdb will wait for the
+ results in some situations, and it turns out that this step can be
+ slow. This is PR symtab/29105.
+
+ This can be sped up by parallelizing, at a small memory cost. Now
+ each index is finalized on its own, in a worker thread. The cost
+ comes from name canonicalization: if a given non-canonical name is
+ referred to by multiple indices, there will be N canonical copies (one
+ per index) rather than just one.
+
+ This requires changing the users of the index to iterate over multiple
+ results. However, this is easily done by introducing a new "chained
+ range" class.
+
+ When run on gdb itself, the memory cost seems rather low -- on my
+ current machine, "maint space 1" reports no change due to the patch.
+
+ For performance testing, using "maint time 1" and "file" will not show
+ correct results. That approach measures "time to next prompt", but
+ because the patch only affects background work, this shouldn't (and
+ doesn't) change. Instead, a simple way to make gdb wait for the
+ results is to set a breakpoint.
+
+ Before:
+
+ $ /bin/time -f%e ~/gdb/install/bin/gdb -nx -q -batch \
+ -ex 'break main' /tmp/gdb
+ Breakpoint 1 at 0x43ec30: file ../../binutils-gdb/gdb/gdb.c, line 28.
+ 2.00
+
+ After:
+
+ $ /bin/time -f%e ./gdb/gdb -nx -q -batch \
+ -ex 'break main' /tmp/gdb
+ Breakpoint 1 at 0x43ec30: file ../../binutils-gdb/gdb/gdb.c, line 28.
+ 0.65
+
+ Regression tested on x86-64 Fedora 34.
+
+ Bug: https://sourceware.org/bugzilla/show_bug.cgi?id=29105
+
+2022-05-26 Alan Modra <amodra@gmail.com>
+
+ bit-rot in target before_parse function
+ Copy initialisation over from the elf.em before_parse. Commit
+ ba951afb999 2022-05-03 changed behaviour on arm and score regarding
+ exec stack. This patch restores the previous behaviour.
+
+ * emultempl/aarch64elf.em (before_parse): Init separate_code,
+ warn_execstack, no_warn_rwx_segments and default_execstack.
+ * emultempl/armelf.em (before_parse): Likewise.
+ * emultempl/scoreelf.em (before_parse): Likewise.
+ * testsuite/ld-elf/elf.exp (target_defaults_to_execstack): Return
+ true for arm and nacl.
+
+2022-05-26 Richard Earnshaw <rearnsha@arm.com>
+
+ arm: avoid use of GNU builtin function in s_arm_unwind_save_mixed
+ Whilst reviewing Luis' proposed change to s_arm_unwind_save_mixed
+ yesterday I noticed that we were making use of __builting_clzl
+ directly within the main function, which is not guaranteed to be
+ portable. Whilst studying the code further, I also realized that it
+ could be rewritten without using it and also reworked to remove a lot
+ of unnecessary iterations steps. So this patch does that (and also
+ removes the source of the warning that Luis was trying to fix).
+ Finally, with the rewrite we can also simplify the caller of this
+ routine as the new version can handle all the cases directly.
+
+ * config/tc-arm.c (s_arm_unwind_save_mixed): Rewrite without
+ using __builtin_clzl.
+ (s_arm_unwind_save): Simplify logic for simple/mixed register saves.
+
+2022-05-26 Lancelot SIX <lancelot.six@amd.com>
+
+ gdb/linux-nat: xfer_memory_partial return E_IO on error
+ When accessing /proc/PID/mem, if pread64/pwrite64/read/write encounters
+ an error and return -1, linux_proc_xfer_memory_partial return
+ TARGET_XFER_EOF.
+
+ I think it should return TARGET_XFER_E_IO in this case. TARGET_XFER_EOF
+ is returned when pread64/pwrite64/read/frite returns 0, which indicates
+ that the address space is gone and the whole process has exited or
+ execed.
+
+ This patch makes this change.
+
+ Regression tested on x86_64-linux-gnu.
+
+ Change-Id: I6030412459663b8d7933483fdda22a6c2c5d7221
+
+2022-05-26 Lancelot SIX <lancelot.six@amd.com>
+
+ gdb/testsuite: prefer gdb_test in gdb.dwarf2/calling-convention
+ Since ed01945057c "Make gdb_test's question non-optional if specified",
+ if the question and response parameters are given to gdb_test, the
+ framework enforces that GDB asks the question. Before this patch, tests
+ needed to use gdb_test_multiple to enforce this.
+
+ This patch updates the gdb.dwarf2/calling-convention.exp testcase to use
+ gdb_test to check that GDB asks a question. This replaces the more
+ complicated gdb_test_multiple based implementation.
+
+ Tested on x86_64-gnu-linux.
+
+ Change-Id: I7216e822ca68f2727e0450970097d74c27c432fe
+
+2022-05-26 Potharla, Rupesh <Rupesh.Potharla@amd.com>
+
+ bfd: Add Support for DW_FORM_strx* and DW_FORM_addrx*
+
+2022-05-26 Luca Boccassi <bluca@debian.org>
+
+ ld: add --package-metadata
+ Generate a .note.package FDO package metadata ELF note, following
+ the spec: https://systemd.io/ELF_PACKAGE_METADATA/
+
+ If the jansson library is available at build time (and it is explicitly
+ enabled), link ld to it, and use it to validate that the input is
+ correct JSON, to avoid writing garbage to the file. The
+ configure option --enable-jansson has to be used to explicitly enable
+ it (error out when not found). This allows bootstrappers (or others who
+ are not interested) to seamlessly skip it without issues.
+
+2022-05-26 GDB Administrator <gdbadmin@sourceware.org>
+
+ Automatic date update in version.in
+
+2022-05-26 Natarajan, Kavitha <Kavitha.Natarajan@amd.com>
+
+ Re: Add bionutils support for DWARF v5's DW_OP_addrx
+ Testsuite files belonging to commit 3ac9da49378c.
+
+2022-05-25 Pedro Alves <pedro@palves.net>
+
+ Show enabled locations with disabled breakpoint parent as "y-"
+ Currently, breakpoint locations that are enabled while their parent
+ breakpoint is disabled are displayed with "y" in the Enb colum of
+ "info breakpoints":
+
+ (gdb) info breakpoints
+ Num Type Disp Enb Address What
+ 1 breakpoint keep n <MULTIPLE>
+ 1.1 y 0x00000000000011b6 in ...
+ 1.2 y 0x00000000000011c2 in ...
+ 1.3 n 0x00000000000011ce in ...
+
+ Such locations won't trigger a break, so to avoid confusion, show "y-"
+ instead. For example:
+
+ (gdb) info breakpoints
+ Num Type Disp Enb Address What
+ 1 breakpoint keep n <MULTIPLE>
+ 1.1 y- 0x00000000000011b6 in ...
+ 1.2 y- 0x00000000000011c2 in ...
+ 1.3 n 0x00000000000011ce in ...
+
+ The "-" sign is inspired on how the TUI represents breakpoints on the
+ left side of the source window, with "b-" for a disabled breakpoint.
+
+ Change-Id: I9952313743c51bf21b4b380c72360ef7d4396a09
+
+2022-05-25 Natarajan, Kavitha <Kavitha.Natarajan@amd.com>
+
+ Add bionutils support for DWARF v5's DW_OP_addrx.
+
+2022-05-25 Pedro Alves <pedro@palves.net>
+
+ gdb: Fix DUPLICATE and PATH regressions throughout
+ The previous patch to add -prompt/-lbl to gdb_test introduced a
+ regression: Before, you could specify an explicit empty message to
+ indicate you didn't want to PASS, like so:
+
+ gdb_test COMMAND PATTERN ""
+
+ After said patch, gdb_test no longer distinguishes
+ no-message-specified vs empty-message, so tests that previously would
+ be silent on PASS, now started emitting PASS messages based on
+ COMMAND. This in turn introduced a number of PATH/DUPLICATE
+ violations in the testsuite.
+
+ This commit fixes all the regressions I could see.
+
+ This patch uses the new -nopass feature introduced in the previous
+ commit, but tries to avoid it if possible. Most of the patch fixes
+ DUPLICATE issues the usual way, of using with_test_prefix or explicit
+ unique messages.
+
+ See previous commit's log for more info.
+
+ In addition to looking for DUPLICATEs, I also looked for cases where
+ we would now end up with an empty message in gdb.sum, due to a
+ gdb_test being passed both no message and empty command. E.g., this
+ in gdb.ada/bp_reset.exp:
+
+ gdb_run_cmd
+ gdb_test "" "Breakpoint $decimal, foo\\.nested_sub \\(\\).*"
+
+ was resulting in this in gdb.sum:
+
+ PASS: gdb.ada/bp_reset.exp:
+
+ I fixed such cases by passing an explicit message. We may want to
+ make such cases error out.
+
+ Tested on x86_64 GNU/Linux, native and native-extended-gdbserver. I
+ see zero PATH cases now. I get zero DUPLICATEs with native testing
+ now. I still see some DUPLICATEs with native-extended-gdbserver, but
+ those were preexisting, unrelated to the gdb_test change.
+
+ Change-Id: I5375f23f073493e0672190a0ec2e847938a580b2
+
+2022-05-25 Pedro Alves <pedro@palves.net>
+
+ Add -nopass option to gdb_test/gdb_test_multiple
+ The previous patch to add -prompt/-lbl to gdb_test introduced a
+ regression: Before, you could specify an explicit empty message to
+ indicate you didn't want to PASS, like so:
+
+ gdb_test COMMAND PATTERN ""
+
+ After said patch, gdb_test no longer distinguishes
+ no-message-specified vs empty-message, so tests that previously would
+ be silent on PASS, now started emitting PASS messages based on
+ COMMAND. This in turn introduced a number of PATH/DUPLICATE
+ violations in the testsuite.
+
+ I think that not issuing a PASS should be restricted to only a few
+ cases -- namely in shared routines exported by gdb.exp, which happen
+ to use gdb_test internally. In tests that iterate an unknown number
+ of tests exercising some racy scenario. In the latter case, if we
+ emit PASSes for each iteration, we run into the situation where
+ different testsuite runs emit a different number of PASSes.
+
+ Thus, this patch preserves the current behavior, and, instead, adds a
+ new "-nopass" option to gdb_test and gdb_test_no_output. Compared to
+ the old way of supressing PASS with an empty message, this has the
+ advantage that you can specify a FAIL message that is distinct from
+ the command string, and, it's also more explicit.
+
+ Change-Id: I5375f23f073493e0672190a0ec2e847938a580b2
+
+2022-05-25 Tsukasa OI <research_trasio@irq.a4lg.com>
+
+ RISC-V: Fix RV32Q conflict
+ This commit makes RV32 + 'Q' extension (version 2.2 or later) not
+ conflicting since this combination is no longer prohibited by the
+ specification.
+
+ bfd/ChangeLog:
+
+ * elfxx-riscv.c (riscv_parse_check_conflicts): Remove conflict
+ detection that prohibits RV32Q on 'Q' version 2.2 or later.
+
+ gas/ChangeLog:
+
+ * testsuite/gas/riscv/march-fail-rv32iq.d: Removed.
+ * testsuite/gas/riscv/march-fail-rv32iq.l: Likewise.
+ * testsuite/gas/riscv/march-fail-rv32iq2p0.d: New test
+ showing RV32IQ fails on 'Q' extension version 2.0.
+ * testsuite/gas/riscv/march-fail-rv32iq2p0.l: Likewise.
+ * testsuite/gas/riscv/march-fail-rv32iq2.d: Likewise.
+ * testsuite/gas/riscv/march-fail-rv32iq-isa-2p2.d: New test
+ showing RV32IQ fails on ISA specification version 2.2.
+ * testsuite/gas/riscv/march-ok-rv32iq2p2.d: New test
+ showing RV32IQ succesds on 'Q' extension version 2.2.
+ * testsuite/gas/riscv/march-ok-rv32iq-isa-20190608.d: New test
+ showing RV32IQ succesds on ISA specification 20190608.
+
+2022-05-25 Dmitry Selyutin <ghostmansd@gmail.com>
+
+ opcodes: introduce BC field; fix isel
+ Per Power ISA Version 3.1B 3.3.12, isel uses BC field rather than CRB
+ field present in binutils sources. Also, per 1.6.2, BC has the same
+ semantics as BA and BB fields, so this should keep the same flags and
+ mask, only with the different offset.
+
+ opcodes/
+ * ppc-opc.c
+ (BC): Define new field, with the same definition as CRB field,
+ but with the PPC_OPERAND_CR_BIT flag present.
+ gas/
+ * testsuite/gas/ppc/476.d: Update.
+ * testsuite/gas/ppc/a2.d: Update.
+ * testsuite/gas/ppc/e500.d: Update.
+ * testsuite/gas/ppc/power7.d: Update.
+
+2022-05-25 Dmitry Selyutin <ghostmansd@gmail.com>
+
+ ppc: extend opindex to 16 bits
+ With the upcoming SVP64 extension[0] to PowerPC architecture, it became
+ evident that PowerPC operand indices no longer fit 8 bits. This patch
+ switches the underlying type to uint16_t, also introducing a special
+ typedef so that any future extension goes even smoother.
+
+ [0] https://libre-soc.org
+
+ include/
+ * opcode/ppc.h (ppc_opindex_t): New typedef.
+ (struct powerpc_opcode): Use it.
+ (PPC_OPINDEX_MAX): Define.
+ gas/
+ * write.h (struct fix): Increase size of fx_pcrel_adjust.
+ Reorganise.
+ * config/tc-ppc.c (insn_validate): Use ppc_opindex_t for operands.
+ (md_assemble): Likewise.
+ (md_apply_fix): Likewise. Mask fx_pcrel_adjust with PPC_OPINDEX_MAX.
+ (ppc_setup_opcodes): Adjust opcode index assertion.
+ opcodes/
+ * ppc-dis.c (skip_optional_operands): Use ppc_opindex_t for
+ operand pointer.
+ (lookup_powerpc, lookup_prefix, lookup_vle, lookup_spe2): Likewise.
+ (print_insn_powerpc): Likewise.
+
+2022-05-25 GDB Administrator <gdbadmin@sourceware.org>
+
+ Automatic date update in version.in
+
+2022-05-24 Tom de Vries <tdevries@suse.de>
+
+ [gdb/testsuite] Fix gdb.opt/clobbered-registers-O2.exp with clang
+ When running test-case gdb.opt/clobbered-registers-O2.exp with clang 12.0.1, I
+ get:
+ ...
+ (gdb) run ^M
+ Starting program: clobbered-registers-O2 ^M
+ ^M
+ Program received signal SIGSEGV, Segmentation fault.^M
+ gen_movsd (operand0=<optimized out>, operand1=<optimized out>) at \
+ clobbered-registers-O2.c:31^M
+ 31 return *start_sequence(operand0, operand1);^M
+ (gdb) FAIL: gdb.opt/clobbered-registers-O2.exp: runto: run to start_sequence
+ ...
+
+ The problem is that the breakpoint in start_sequence doesn't trigger, because:
+ - the call to start_sequence in gen_movsd is optimized away, despite the
+ __attribute__((noinline)), so the actual function start_sequence doesn't get
+ called, and
+ - the debug info doesn't contain inlined function info, so there's only one
+ breakpoint location.
+
+ Adding noclone and noipa alongside the noinline attribute doesn't fix this.
+
+ Adding the clang-specific attribute optnone in start_sequence does, but since
+ it inhibits all optimization, that's not a preferred solution in a gdb.opt
+ test-case, and it would work only for clang and not other compilers that
+ possibly have the same issue.
+
+ Fix this by moving functions start_sequence and gen_movsd into their own
+ files, as a way of trying harder to enforce noinline/noipa/noclone.
+
+ Tested on x86_64-linux.
+
+2022-05-24 Tom de Vries <tdevries@suse.de>
+
+ [gdb/testsuite] Fix gdb.opt/clobbered-registers-O2.exp with gcc-12
+ When running test-case gdb.opt/clobbered-registers-O2.exp with gcc-12, I run
+ into:
+ ...
+ (gdb) PASS: gdb.opt/clobbered-registers-O2.exp: backtracing
+ print operand0^M
+ $1 = (unsigned int *) 0x7fffffffd070^M
+ (gdb) print *operand0^M
+ $2 = 4195541^M
+ (gdb) FAIL: gdb.opt/clobbered-registers-O2.exp: print operand0
+ ...
+
+ The problem is that starting gcc-12, the assignments to x and y in main are
+ optimized away:
+ ...
+ int main(void)
+ {
+ unsigned x, y;
+
+ x = 13;
+ y = 14;
+ return (int)gen_movsd (&x, &y);
+ ...
+
+ Fix this by making x and y volatile.
+
+ Note that the test-case intends to check the handling of debug info for
+ optimized code in function gen_movsd, so inhibiting optimization in main
+ doesn't interfere with that.
+
+ Tested on x86_64-linux.
+
+ Bug: https://sourceware.org/bugzilla/show_bug.cgi?id=29161
+
+2022-05-24 Tiezhu Yang <yangtiezhu@loongson.cn>
+
+ gdb: LoongArch: Define LOONGARCH_LINUX_NUM_GREGSET as 45
+ LOONGARCH_LINUX_NUM_GREGSET should be defined as 45 (32 + 1 + 1 + 11)
+ due to reserved 11 for extension in glibc, otherwise when execute:
+
+ make check-gdb TESTS="gdb.base/corefile.exp"
+
+ there exists the following failed testcase:
+
+ (gdb) core-file /home/loongson/build.git/gdb/testsuite/outputs/gdb.base/corefile/corefile.core
+ [New LWP 7742]
+ warning: Unexpected size of section `.reg/7742' in core file.
+ Core was generated by `/home/loongson/build.git/gdb/testsuite/outputs/gdb.base/corefile/corefile'.
+ Program terminated with signal SIGABRT, Aborted.
+ warning: Unexpected size of section `.reg/7742' in core file.
+ #0 0x000000fff76f4e24 in raise () from /lib/loongarch64-linux-gnu/libc.so.6
+ (gdb) FAIL: gdb.base/corefile.exp: core-file warning-free
+
+2022-05-24 Christophe Lyon <christophe.lyon@arm.com>
+
+ AArch64: add support for DFP (Decimal Floating point)
+ This small patch adds support for TYPE_CODE_DECFLOAT in
+ aapcs_is_vfp_call_or_return_candidate_1 and pass_in_v_vfp_candidate,
+ so that GDB for AArch64 knows how to pass DFP parameters and how to
+ read DFP results when calling a function.
+
+ Tested on aarch64-linux-gnu, with a GCC with DFP support in the PATH,
+ all of GDB's DFP tests pass.
+
+2022-05-24 Christophe Lyon <christophe.lyon@arm.com>
+
+ Merge config/ changes from GCC, to enable DFP on AArch64
+ 2022-04-28 Christophe Lyon <christophe.lyon@arm.com>
+
+ config/
+ * dfp.m4 (enable_decimal_float): Enable BID for AArch64.
+
+ libdecnumber/
+ * configure: Regenerate.
+
+2022-05-24 Alan Modra <amodra@gmail.com>
+
+ PR29171, invalid read causing SIGSEGV
+ The fix here is to pass "section" down to read_and_display_attr_value.
+ The test in read_and_display_attr_value is a little bit of hardening.
+
+ PR 29171
+ * dwarf.c (display_debug_macro, display_debug_names): Pass section
+ to read_and_display_attr_value2.
+ (read_and_display_attr_value): Don't attempt to check for .dwo
+ section name when section is NULL.
+
+2022-05-24 Alan Modra <amodra@gmail.com>
+
+ PR29170, divide by zero displaying fuzzed .debug_names
+ PR 29170
+ * dwarf.c (display_debug_names): Don't attempt to display bucket
+ clashes when bucket count is zero.
+
+ PR29169, invalid read displaying fuzzed .gdb_index
+ PR 29169
+ * dwarf.c (display_gdb_index): Combine sanity checks. Calculate
+ element counts, not word counts.
+
+2022-05-24 GDB Administrator <gdbadmin@sourceware.org>
+
+ Automatic date update in version.in
+
+2022-05-23 John Baldwin <jhb@FreeBSD.org>
+
+ Tweak the std::hash<> specialization for aarch64_features.
+ Move the specialization into an explicit std namespace to workaround a
+ bug in older compilers. GCC 6.4.1 at least fails to compile the previous
+ version with the following error:
+
+ gdb/arch/aarch64.h:48:13: error: specialization of 'template<class _Tp> struct std::hash' in different namespace [-fpermissive]
+
+ struct std::hash<aarch64_features>
+
+2022-05-23 John Baldwin <jhb@FreeBSD.org>
+
+ Fix loongarch_iterate_over_regset_sections for non-native targets.
+ Define a constant for the number of registers stored in a register set
+ and use this with register_size to compute the size of the
+ general-purpose register set in core dumps.
+
+ This also fixes the build on hosts such as FreeBSD that do not define
+ an elf_gregset_t type.
+
+2022-05-23 Tiezhu Yang <yangtiezhu@loongson.cn>
+
+ gdb: LoongArch: Implement the iterate_over_regset_sections gdbarch method
+ When execute the following command on LoongArch:
+
+ make check-gdb TESTS="gdb.base/auxv.exp"
+
+ there exist the following unsupported and failed testcases:
+
+ UNSUPPORTED: gdb.base/auxv.exp: gcore
+ FAIL: gdb.base/auxv.exp: load core file for info auxv on native core dump
+ FAIL: gdb.base/auxv.exp: info auxv on native core dump
+ FAIL: gdb.base/auxv.exp: matching auxv data from live and core
+ UNSUPPORTED: gdb.base/auxv.exp: info auxv on gcore-created dump
+ UNSUPPORTED: gdb.base/auxv.exp: matching auxv data from live and gcore
+
+ we can see the following messages in gdb/testsuite/gdb.log:
+
+ gcore /home/loongson/build.git/gdb/testsuite/outputs/gdb.base/auxv/auxv.gcore
+ Target does not support core file generation.
+ (gdb) UNSUPPORTED: gdb.base/auxv.exp: gcore
+
+ In order to fix the above issues, implement the iterate_over_regset_sections
+ gdbarch method to iterate over core file register note sections on LoongArch.
+
+ By the way, with this patch, the failed testcases in gdb.base/corefile.exp
+ and gdb.base/gcore.exp can also be fixed.
+
+2022-05-23 Tom de Vries <tdevries@suse.de>
+
+ [gdb/testsuite] Fix -prompt handling in gdb_test
+ With check-read1 I run into:
+ ...
+ [infrun] maybe_set_commit_resumed_all_targets: not requesting
+ commit-resumed for target native, no resumed threads^M
+ (gdb) FAIL: gdb.base/ui-redirect.exp: debugging: continue
+ [infrun] fetch_inferior_event: exit^M
+ ...
+
+ The problem is that proc gdb_test doesn't pass down the -prompt option to proc
+ gdb_test_multiple, due to a typo making this lappend without effect:
+ ...
+ set opts {}
+ lappend "-prompt $prompt"
+ ...
+
+ Fix this by actually appending to opts.
+
+ Tested on x86_64-linux.
+
+2022-05-23 Tom de Vries <tdevries@suse.de>
+
+ [gdbsupport] Fix UB in print-utils.cc:int_string
+ When building gdb with -fsanitize=undefined, I run into:
+ ...
+ (gdb) PASS: gdb.ada/access_to_packed_array.exp: set logging enabled on
+ maint print symbols^M
+ print-utils.cc:281:29:runtime error: negation of -9223372036854775808 cannot \
+ be represented in type 'long int'; cast to an unsigned type to negate this \
+ value to itself
+ (gdb) FAIL: gdb.ada/access_to_packed_array.exp: maint print symbols
+ ...
+
+ By running in a debug session, we find that this happens during printing of:
+ ...
+ typedef system.storage_elements.storage_offset: \
+ range -9223372036854775808 .. 9223372036854775807;
+ ...
+ Possibly, an ada test-case could be created that exercises this in isolation.
+
+ The problem is here in int_string, where we negate a val with type LONGEST:
+ ...
+ return decimal2str ("-", -val, width);
+ ...
+
+ Fix this by, as recommend, using "-(ULONGEST)val" instead.
+
+ Tested on x86_64-linux.
+
+2022-05-23 Tom de Vries <tdevries@suse.de>
+
+ [gdb/exp] Fix UB in scalar_binop
+ When building gdb with -fsanitize=undefined, I run into:
+ ...
+ $ gdb -q -batch -ex "p -(-0x7fffffffffffffff - 1)"
+ src/gdb/valarith.c:1385:10: runtime error: signed integer overflow: \
+ 0 - -9223372036854775808 cannot be represented in type 'long int'
+ $1 = -9223372036854775808
+ ...
+
+ Fix this by performing the substraction in scalar_binop using unsigned types.
+
+ Tested on x86_64-linux.
+
+2022-05-23 Tom de Vries <tdevries@suse.de>
+
+ [gdb/ada] Fix gdb.ada/dynamic-iface.exp with gcc 7
+ This test in test-case gdb.ada/dynamic-iface.exp passes with gcc 8:
+ ...
+ (gdb) print obj^M
+ $1 = (n => 3, a => "ABC", value => 93)^M
+ (gdb) PASS: gdb.ada/dynamic-iface.exp: print local as interface
+ ...
+ but fails with gcc 7:
+ ...
+ (gdb) print obj^M
+ $1 = ()^M
+ (gdb) FAIL: gdb.ada/dynamic-iface.exp: print local as interface
+ ...
+
+ More concretely, we have trouble finding the type of obj. With gcc 8:
+ ...
+ $ gdb -q -batch main -ex "b concrete.adb:20" -ex run -ex "ptype obj"
+ ...
+ type = <ref> new concrete.intermediate with record
+ value: integer;
+ end record
+ ...
+ and with gcc 7:
+ ...
+ type = <ref> tagged record null; end record
+ ...
+
+ The translation from tagged type to "full view" type happens in
+ ada_tag_value_at_base_address, where we hit this code:
+ ...
+ /* Storage_Offset'Last is used to indicate that a dynamic offset to
+ top is used. In this situation the offset is stored just after
+ the tag, in the object itself. */
+ if (offset_to_top == last)
+ {
+ struct value *tem = value_addr (tag);
+ tem = value_ptradd (tem, 1);
+ tem = value_cast (ptr_type, tem);
+ offset_to_top = value_as_long (value_ind (tem));
+ }
+ ...
+ resulting in an offset_to_top for gcc 8:
+ ...
+ (gdb) p offset_to_top
+ $1 = -16
+ ...
+ and for gcc 7:
+ ...
+ (gdb) p offset_to_top
+ $1 = 16
+ ...
+
+ The difference is expected, it bisects to gcc commit d0567dc0dbf ("[multiple
+ changes]") which mentions this change.
+
+ There's some code right after the code quoted above that deals with this
+ change:
+ ...
+ else if (offset_to_top > 0)
+ {
+ /* OFFSET_TO_TOP used to be a positive value to be subtracted
+ from the base address. This was however incompatible with
+ C++ dispatch table: C++ uses a *negative* value to *add*
+ to the base address. Ada's convention has therefore been
+ changed in GNAT 19.0w 20171023: since then, C++ and Ada
+ use the same convention. Here, we support both cases by
+ checking the sign of OFFSET_TO_TOP. */
+ offset_to_top = -offset_to_top;
+ }
+ ...
+ but it's not activated because of the 'else'.
+
+ Fix this by removing the 'else'.
+
+ Tested on x86_64-linux, with gcc 7.5.0.
+
+ Bug: https://sourceware.org/bugzilla/show_bug.cgi?id=29057
+
+2022-05-23 Mark Harmstone <mark@harmstone.com>
+
+ ld: use definitions in generate_reloc rather than raw literals
+
+2022-05-23 Tom de Vries <tdevries@suse.de>
+
+ [gdb/testsuite] Skip language auto in gdb.base/parse_number.exp
+ In test-case gdb.base/parse_number.exp, we skip architecture auto in the
+ $supported_archs loop, to prevent duplicate testing.
+
+ Likewise, skip language auto and its alias local in the $::all_languages
+ loop. This reduces the number of tests from 17744 to 15572.
+
+ Tested on x86_64-linux, with a build with --enable-targets=all.
+
+2022-05-23 GDB Administrator <gdbadmin@sourceware.org>
+
+ Automatic date update in version.in
+
+2022-05-22 Alok Kumar Sharma <AlokKumar.Sharma@amd.com>
+
+ Accept functions with DW_AT_linkage_name present
+ Currently GDB is not able to debug (Binary generated with Clang) variables
+ present in shared/private clause of OpenMP Task construct. Please note that
+ LLVM debugger LLDB is able to debug.
+
+ In case of OpenMP, compilers generate artificial functions which are not
+ present in actual program. This is done to apply parallelism to block of
+ code.
+
+ For non-artifical functions, DW_AT_name attribute should contains the name
+ exactly as present in actual program.
+ (Ref# http://wiki.dwarfstd.org/index.php?title=Best_Practices)
+ Since artificial functions are not present in actual program they not having
+ DW_AT_name and having DW_AT_linkage_name instead should be fine.
+
+ Currently GDB is invalidating any function not havnig DW_AT_name which is why
+ it is not able to debug OpenMP (Clang).
+
+ It should be fair to fallback to check DW_AT_linkage_name in case DW_AT_name
+ is absent.
+
+2022-05-22 GDB Administrator <gdbadmin@sourceware.org>
+
+ Automatic date update in version.in
+
+2022-05-21 GDB Administrator <gdbadmin@sourceware.org>
+
+ Automatic date update in version.in
+
+2022-05-20 Pedro Alves <pedro@palves.net>
+
+ Rename base_breakpoint -> code_breakpoint
+ Even after the previous patches reworking the inheritance of several
+ breakpoint types, the present breakpoint hierarchy looks a bit
+ surprising, as we have "breakpoint" as the superclass, and then
+ "base_breakpoint" inherits from "breakpoint". Like so, simplified:
+
+ breakpoint
+ base_breakpoint
+ ordinary_breakpoint
+ internal_breakpoint
+ momentary_breakpoint
+ ada_catchpoint
+ exception_catchpoint
+ tracepoint
+ watchpoint
+ catchpoint
+ exec_catchpoint
+ ...
+
+ The surprising part to me is having "base_breakpoint" being a subclass
+ of "breakpoint". I'm just refering to naming here -- I mean, you'd
+ expect that it would be the top level baseclass that would be called
+ "base".
+
+ Just flipping the names of breakpoint and base_breakpoint around
+ wouldn't be super great for us, IMO, given we think of every type of
+ *point as a breakpoint at the user visible level. E.g., "info
+ breakpoints" shows watchpoints, tracepoints, etc. So it makes to call
+ the top level class breakpoint.
+
+ Instead, I propose renaming base_breakpoint to code_breakpoint. The
+ previous patches made sure that all code breakpoints inherit from
+ base_breakpoint, so it's fitting. Also, "code breakpoint" contrasts
+ nicely with a watchpoint also being typically known as a "data
+ breakpoint".
+
+ After this commit, the resulting hierarchy looks like:
+
+ breakpoint
+ code_breakpoint
+ ordinary_breakpoint
+ internal_breakpoint
+ momentary_breakpoint
+ ada_catchpoint
+ exception_catchpoint
+ tracepoint
+ watchpoint
+ catchpoint
+ exec_catchpoint
+ ...
+
+ ... which makes a lot more sense to me.
+
+ I've left this patch as last in the series in case people want to
+ bikeshed on the naming.
+
+ "code" has a nice property that it's exactly as many letters as
+ "base", so this patch didn't require any reindentation. :-)
+
+ Change-Id: Id8dc06683a69fad80d88e674f65e826d6a4e3f66
+
+2022-05-20 Pedro Alves <pedro@palves.net>
+
+ Test "set multiple-symbols on" creating multiple breakpoints
+ To look for code paths that lead to create_breakpoints_sal creating
+ multiple breakpoints, I ran the whole testsuite with this hack:
+
+ --- a/gdb/breakpoint.c
+ +++ b/gdb/breakpoint.c
+ @@ -8377,8 +8377,7 @@ create_breakpoints_sal (struct gdbarch *gdbarch,
+ int from_tty,
+ int enabled, int internal, unsigned flags)
+ {
+ - if (canonical->pre_expanded)
+ - gdb_assert (canonical->lsals.size () == 1);
+ + gdb_assert (canonical->lsals.size () == 1);
+
+ surprisingly, the assert never failed...
+
+ The way to get to create_breakpoints_sal with multiple lsals is to use
+ "set multiple-symbols ask" and then select multiple options from the
+ menu, like so:
+
+ (gdb) set multiple-symbols ask
+ (gdb) b overload1arg
+ [0] cancel
+ [1] all
+ [2] /home/pedro/gdb/binutils-gdb/src/gdb/testsuite/gdb.cp/ovldbreak.cc:foo::overload1arg()
+ [3] /home/pedro/gdb/binutils-gdb/src/gdb/testsuite/gdb.cp/ovldbreak.cc:foo::overload1arg(char)
+ [4] /home/pedro/gdb/binutils-gdb/src/gdb/testsuite/gdb.cp/ovldbreak.cc:foo::overload1arg(double)
+ [5] /home/pedro/gdb/binutils-gdb/src/gdb/testsuite/gdb.cp/ovldbreak.cc:foo::overload1arg(float)
+ [6] /home/pedro/gdb/binutils-gdb/src/gdb/testsuite/gdb.cp/ovldbreak.cc:foo::overload1arg(int)
+ [7] /home/pedro/gdb/binutils-gdb/src/gdb/testsuite/gdb.cp/ovldbreak.cc:foo::overload1arg(long)
+ [8] /home/pedro/gdb/binutils-gdb/src/gdb/testsuite/gdb.cp/ovldbreak.cc:foo::overload1arg(short)
+ [9] /home/pedro/gdb/binutils-gdb/src/gdb/testsuite/gdb.cp/ovldbreak.cc:foo::overload1arg(signed char)
+ [10] /home/pedro/gdb/binutils-gdb/src/gdb/testsuite/gdb.cp/ovldbreak.cc:foo::overload1arg(unsigned char)
+ [11] /home/pedro/gdb/binutils-gdb/src/gdb/testsuite/gdb.cp/ovldbreak.cc:foo::overload1arg(unsigned int)
+ [12] /home/pedro/gdb/binutils-gdb/src/gdb/testsuite/gdb.cp/ovldbreak.cc:foo::overload1arg(unsigned long)
+ [13] /home/pedro/gdb/binutils-gdb/src/gdb/testsuite/gdb.cp/ovldbreak.cc:foo::overload1arg(unsigned short)
+ > 2-3
+ Breakpoint 2 at 0x1532: file /home/pedro/gdb/binutils-gdb/src/gdb/testsuite/gdb.cp/ovldbreak.cc, line 107.
+ Breakpoint 3 at 0x154b: file /home/pedro/gdb/binutils-gdb/src/gdb/testsuite/gdb.cp/ovldbreak.cc, line 110.
+ warning: Multiple breakpoints were set.
+ Use the "delete" command to delete unwanted breakpoints.
+
+ ... which would trigger the assert.
+
+ This commit makes gdb.cp/ovldbreak.exp test this scenario. It does
+ that by making set_bp_overloaded take a list of expected created
+ breakpoints rather than just one breakpoint. It converts the
+ procedure to use gdb_test_multiple instead of send_gdb/gdb_expect
+ along the way.
+
+ Change-Id: Id87d1e08feb6670440d926f5344e5081f5e37c8e
+
+2022-05-20 Pedro Alves <pedro@palves.net>
+
+ Make sure momentary breakpoints are always thread-specific
+ This adds a new ctor to momentary_breakpoints with a few parameters
+ that are always necessary for momentary breakpoints.
+
+ In particular, I noticed that set_std_terminate_breakpoint doesn't
+ make the breakpoint be thread specific, which looks like a bug to me.
+
+ The point of that breakpoint is to intercept std::terminate calls that
+ happen as result of the called thread throwing an exception that won't
+ be caught by the dummy frame. If some other thread calls
+ std::terminate, IMO, it's no different from some other thread calling
+ exit/_exit, for example.
+
+ Change-Id: Ifc5ff4a6d6e58b8c4854d00b86725382d38a1a02
+
+2022-05-20 Pedro Alves <pedro@palves.net>
+
+ Momentary breakpoints should have no breakpoint number
+ Momentary breakpoints have no breakpoint number, their breakpoint
+ number should be always 0, to avoid constantly incrementing (or
+ decrementing) the internal breakpoint count.
+
+ Indeed, set_momentary_breakpoint installs the created breakpoint
+ without a number.
+
+ However, momentary_breakpoint_from_master incorrectly gives an
+ internal breakpoint number to the new breakpoint. This commit fixes
+ that.
+
+ Change-Id: Iedcae5432cdf232db9e9a6e1a646d358abd34f95
+
+2022-05-20 Pedro Alves <pedro@palves.net>
+
+ Add/tweak intro comments of struct breakpoint and several subclasses
+ This tweaks the intro comments of the following classes:
+
+ internal_breakpoint
+ momentary_breakpoint
+ breakpoint
+ base_breakpoint
+ watchpoint
+ catchpoint
+
+ Change-Id: If6b31f51ebbb81705fbe5b8435f60ab2c88a98c8
+
+2022-05-20 Pedro Alves <pedro@palves.net>
+
+ Move add_location(sal) to base_breakpoint
+ After the previous patches, only base_breakpoint subclasses use
+ add_location(sal), so we can move it to base_breakpoint (a.k.a. base
+ class for code breakpoints).
+
+ This requires a few casts here and there, but always at spots where
+ you can see from context what the breakpoint's type actually is.
+
+ I inlined new_single_step_breakpoint into its only caller exactly for
+ this reason.
+
+ I did try to propagate more use of base_breakpoint to avoid casts, but
+ that turned out unwieldy for this patch.
+
+ Change-Id: I49d959322b0fdce5a88a216bb44730fc5dd7c6f8
+
+2022-05-20 Pedro Alves <pedro@palves.net>
+
+ Move common bits of catchpoint/exception_catchpoint to breakpoint's ctor
+ Move common bits of catchpoint and exception_catchpoint to
+ breakpoint's ctor, to avoid duplicating code.
+
+ Change-Id: I3a115180f4d496426522f1d89a3875026aea3cf2
+
+2022-05-20 Pedro Alves <pedro@palves.net>
+
+ Make catchpoint inherit breakpoint, eliminate init_raw_breakpoint
+ struct catchpoint's ctor currently calls init_raw_breakpoint, which is
+ a bit weird, as that ctor-like function takes a sal argument, but
+ catchpoints don't have code locations.
+
+ Instead, make struct catchpoint's ctor add the catchpoint's dummy
+ location using add_dummy_location.
+
+ init_raw_breakpoint uses add_location under the hood, and with a dummy
+ sal it would ultimately use the breakpoint's gdbarch for the
+ location's gdbarch, so replace the references to loc->gdbarch (which
+ is now NULL) in syscall_catchpoint to references to the catchpoint's
+ gdbarch.
+
+ struct catchpoint's ctor was the last user of init_raw_breakpoint, so
+ this commit eliminates the latter.
+
+ Since catchpoint locations aren't code locations, make struct
+ catchpoint inherit struct breakpoint instead of base_breakpoint. This
+ let's us delete the tracepoint::re_set override too.
+
+ Change-Id: Ib428bf71efb09fdaf399c56e4372b0f41d9c5869
+
+2022-05-20 Pedro Alves <pedro@palves.net>
+
+ Make breakpoint_address_bits look at the location kind
+ Software watchpoints allocate a special dummy location using
+ software_watchpoint_add_no_memory_location, and then
+ breakpoint_address_bits checks whether the location is that special
+ location to decide whether the location has a meaninful address to
+ print.
+
+ Introduce a new bp_loc_software_watchpoint location kind, and make
+ breakpoint_address_bits use bl_address_is_meaningful instead, which
+ returns false for bp_loc_other, which is in accordance with we
+ document for bp_location::address:
+
+ /* (... snip ...) Valid for all types except
+ bp_loc_other. */
+ CORE_ADDR address = 0;
+
+ Rename software_watchpoint_add_no_memory_location to
+ add_dummy_location, and simplify it. This will be used by catchpoints
+ too in a following patch.
+
+ Note that neither "info breakpoints" nor "maint info breakpoints"
+ actually prints the addresses of watchpoints, but I think it would be
+ useful to do so in "maint info breakpoints". This approach let's us
+ implement that in the future.
+
+ Change-Id: I50e398f66ef618c31ffa662da755eaba6295aed7
+
+2022-05-20 Pedro Alves <pedro@palves.net>
+
+ Make exception_catchpoint inherit base_breakpoint instead of catchpoint
+ exception_catchpoint is really a code breakpoint, with locations set
+ by sals, re-set like other code breakpoints, etc., so make it inherit
+ base_breakpoint.
+
+ This adds a bit of duplicated code to exception_catchpoint's ctor
+ (copied from struct catchpoint's ctor), but it will be eliminated in a
+ following patch.
+
+ Change-Id: I9fbb2927491120e9744a4f5e5cb5e6870ca07009
+
+2022-05-20 Pedro Alves <pedro@palves.net>
+
+ Refactor momentary breakpoints, eliminate set_raw_breakpoint{,_without_location}
+ This commit makes set_momentary_breakpoint allocate the breakpoint
+ type without relying on set_raw_breakpoint, and similarly,
+ momentary_breakpoint_from_master not rely on
+ set_raw_breakpoint_without_location. This will let us convert
+ init_raw_breakpoint to a ctor in a following patch.
+
+ The comment about set_raw_breakpoint being used in gdbtk sources is
+ stale. gdbtk no longer uses it.
+
+ Change-Id: Ibbf77731e4b22e18ccebc1b5799bbec0aff28c8a
+
+2022-05-20 Pedro Alves <pedro@palves.net>
+
+ Refactor set_internal_breakpoint / internal_breakpoint ctor
+ This moves initialization of internal_breakpoint's breakpoint fields
+ to internal_breakpoint's ctor, and stops using
+ new_breakpoint_from_type for internal_breakpoint breakpoints.
+
+ Change-Id: I898ed0565f47cb00e4429f1c6446e6f9a385a78d
+
+2022-05-20 Pedro Alves <pedro@palves.net>
+
+ Convert init_ada_exception_catchpoint to a ctor
+ Currently, init_ada_exception_catchpoint is defined in breakpoint.c, I
+ presume so it can call the static describe_other_breakpoints function.
+ I think this is a dependency inversion.
+ init_ada_exception_catchpoint, being code specific to Ada catchpoints,
+ should be in ada-lang.c, and describe_other_breakpoints, a core
+ function, should be exported.
+
+ And then, we can convert init_ada_exception_catchpoint to an
+ ada_catchpoint ctor.
+
+ Change-Id: I07695572dabc5a75d3d3740fd9b95db1529406a1
+
+2022-05-20 Pedro Alves <pedro@palves.net>
+
+ Make ada_catchpoint_location's owner ctor parameter be ada_catchpoint
+ This commit changes ada_catchpoint_location's ctor from:
+
+ ada_catchpoint_location (breakpoint *owner)
+
+ to:
+
+ ada_catchpoint_location (ada_catchpoint *owner)
+
+ just to make the code better document intention.
+
+ To do this, we need to move the ada_catchpoint_location type's
+ definition to after ada_catchpoint is defined, otherwise the compiler
+ doesn't know that ada_catchpoint is convertible to struct breakpoint.
+
+ Change-Id: Id908b2e38bde30b262381e00c5637adb9bf0129d
+
+2022-05-20 Pedro Alves <pedro@palves.net>
+
+ init_breakpoint_sal -> base_breakpoint::base_breakpoint
+ This converts init_breakpoint_sal to a base_breakpoint constructor.
+
+ It removes a use of init_raw_breakpoint.
+
+ To avoid manually adding a bunch of parameters to
+ new_breakpoint_from_type, and manually passing them down to the
+ constructors of a number of different base_breakpoint subclasses, make
+ new_breakpoint_from_type a variable template function.
+
+ Change-Id: I4cc24133ac4c292f547289ec782fc78e5bbe2510
+
+2022-05-20 Pedro Alves <pedro@palves.net>
+
+ Remove "internal" parameter from a couple functions
+ None of init_breakpoint_sal, create_breakpoint_sal, and
+ strace_marker_create_breakpoints_sal make use of their "internal"
+ parameter, so remove it.
+
+ Change-Id: I943f3bb44717ade7a7b7547edf8f3ff3c37da435
+
+2022-05-20 Pedro Alves <pedro@palves.net>
+
+ More breakpoint_ops parameter elimination
+ Remove breakpoint_ops parameters from a few functions that don't need
+ it.
+
+ Change-Id: Ifcf5e1cc688184acbf5e19b8ea60138ebe63cf28
+
+2022-05-20 Pedro Alves <pedro@palves.net>
+
+ Make a few functions work with base_breakpoint instead of breakpoint
+ This makes tracepoints inherit from base_breakpoint, since their
+ locations are code locations. If we do that, then we can eliminate
+ tracepoint::re_set and tracepoint::decode_location, as they are doing
+ the same as the base_breakpoint implementations.
+
+ With this, all breakpoint types created by new_breakpoint_from_type
+ are code breakpoints, i.e., base_breakpoint subclasses, and thus we
+ can make it return a base_breakpoint pointer.
+
+ Finally, init_breakpoint_sal can take a base_breakpoint pointer as
+ "self" pointer too. This will let us convert this function to a
+ base_breakpoint ctor in a following patch.
+
+ Change-Id: I3a4073ff1a4c865f525588095c18dc42b744cb54
+
+2022-05-20 Pedro Alves <pedro@palves.net>
+
+ ranged_breakpoint: move initialization to ctor
+ Move initialization of ranged_breakpoint's fields to its ctor.
+
+ Change-Id: If7b842861f3cc6a429ea329d45598b5852283ba3
+
+2022-05-20 Pedro Alves <pedro@palves.net>
+
+ ranged_breakpoint: use install_breakpoint
+ This commit replaces a chunk of code in break_range_command by an
+ equivalent call to install_breakpoint.
+
+ Change-Id: I31c06cabd36f5be91740aab029265f678aa78e35
+
+2022-05-20 Pedro Alves <pedro@palves.net>
+
+ ranged_breakpoint: don't use init_raw_breakpoint
+ ranged_breakpoint's ctor already sets the breakpoint's type to
+ bp_hardware_breakpoint.
+
+ Since this is a "regular" breakpoint, b->pspace should remain NULL.
+
+ Thus, the only thing init_raw_breakpoint is needed for, is to add the
+ breakpoint's location. Do that directly.
+
+ Change-Id: I1505de94c3919881c2b300437e2c0da9b05f76bd
+
+2022-05-20 Pedro Alves <pedro@palves.net>
+
+ Make structs breakpoint/base_breakpoint/catchpoint be abstract
+ You should never instanciate these types directly.
+
+ Change-Id: I8086c74c415eadbd44924bb0ef20f34b5b97ee6f
+
+2022-05-20 Pedro Alves <pedro@palves.net>
+
+ add_location_to_breakpoint -> breakpoint::add_location
+ Make add_location_to_breakpoint be a method of struct breakpoint.
+
+ A patch later in the series will move this to base_breakpoint, but for
+ now, it needs to be here.
+
+ Change-Id: I5bdc2ec1a7c2d66f26f51bf6f6adc8384a90b129
+
+2022-05-20 Carl Love <cel@us.ibm.com>
+
+ PowerPC: Make test gdb.arch/powerpc-power10.exp Endian independent.
+ The .quad statement stores the 64-bit hex value in Endian order. When used
+ to store a 64-bit prefix instructions on Big Endian (BE) systems, the .quad
+ statement stores the 32-bit suffix followed by the 32-bit prefix rather
+ than the expected order of prefix word followed by the suffix word. GDB
+ fetches 32-bits at a time when disassembling instructions. The disassembly
+ on BE gets messed up since GDB fetches the suffix first and interprets it
+ as a word instruction not a prefixed instruction. When gdb fetches the
+ prefix part of the instruction, following the initial suffix word, gdb
+ associates the prefix word incorrectly with the following 32-bits as the
+ suffix for the instruction when in fact it is the following instruction.
+
+ For example on BE we have two prefixed instructions stored using the
+ .quad statement as follows:
+
+ addr word GDB action
+ ---------------------------------------------
+ 1 suffix inst A <- GDB interprets as a word instruction
+ 2 prefix inst A <- GDB uses this prefix with
+
+ 3 suffix inst B <- this suffix rather than the suffix at addr 1.
+ 4 prefix inst B
+
+ This patch changes the .quad statement into two .longs to explicitly store
+ the prefix followed by the suffix of the instruction.
+
+ The patch rearranges the instructions to put all of the word instructions
+ together followed by the prefix instructions for clarity.
+
+ The patch has been tested on Power 10 and Power 7 BE and LE to verify
+ the change works as expected.
+
+2022-05-20 Tom Tromey <tromey@adacore.com>
+
+ Remove obsolete text from documentation
+ The documentation says that -enable-pretty-printing is experimental in
+ 7.0 and may change -- that's long enough ago that I think we can say
+ that this text is no longer correct or useful.
+
+2022-05-20 Nick Clifton <nickc@redhat.com>
+
+ Stop readekf and objdump from aggressively following links.
+ * dwarf.c (dwarf_select_sections_by_names): Return zero if no
+ sections were selected.
+ (dwarf_select_sections_by_letters): Likewise.
+ * dwarf.h: (dwarf_select_sections_by_names): Update prototype.
+ (dwarf_select_sections_by_letters): Update prototype.
+ * objdump.c (might_need_separate_debug_info): New function.
+ (dump_bfd): Call new function before attempting to load separate
+ debug info files.
+ (main): Do not enable dwarf section dumping for -WK or -WN.
+ * readelf.c (parse_args): Do not enable dwarf section dumping for
+ -wK or -wN.
+ (might_need_separate_debug_info): New function.
+ (process_object): Call new function before attempting to load
+ separate debug info files.
+ * testsuite/binutils-all/debuginfo.exp: Expect -WE and -wE
+ debuginfod tests to pass.
+ * testsuite/binutils-all/objdump.Wk: Add extra regexps.
+ * testsuite/binutils-all/readelf.k: Add extra regexps.
+
+2022-05-20 Jia-Wei Chen <jiawei@iscas.ac.cn>
+
+ RISC-V: Update zfinx implement with zicsr.
+ Update zfinx implement with zicsr, fix missing fcsr use by zfinx.
+ add zicsr imply by zfinx.
+
+ bfd/ChangeLog:
+
+ * elfxx-riscv.c: New imply.
+
+ gas/ChangeLog:
+
+ * testsuite/gas/riscv/csr-insns-pseudo-zfinx.d: New test.
+
+ opcodes/ChangeLog:
+
+ * riscv-opc.c: Update insn class.
+
+2022-05-20 Tsukasa OI <research_trasio@irq.a4lg.com>
+
+ RISC-V: Remove RV128-only fmv instructions
+ As fmv.x.q and fmv.q.x instructions are RV128-only (not RV64-only),
+ it should be removed until RV128 support for GNU Binutils is required
+ again.
+
+ gas/ChangeLog:
+
+ * testsuite/gas/riscv/fmv.x.q-rv64-fail.d: New failure test.
+ * testsuite/gas/riscv/fmv.x.q-rv64-fail.l: Likewise.
+ * testsuite/gas/riscv/fmv.x.q-rv64-fail.s: Likewise.
+
+ include/ChangeLog:
+
+ * opcode/riscv-opc.h (MATCH_FMV_X_Q, MASK_FMV_X_Q,
+ MATCH_FMV_Q_X, MASK_FMV_Q_X): Remove RV128-only instructions.
+
+ opcodes/ChangeLog:
+
+ * riscv-opc.c (riscv_opcodes): Remove RV128-only instructions.
+
+2022-05-20 Aditya Vidyadhar Kamath <ADITYA.VIDYADHAR.KAMATH@ibm.com>
+
+ Fix non-pointer type compilation error in aix-thread.c
+ In aix-thread.c we use ms->value_address () to get the symbol address.
+ This triggers the following compiler error...
+
+ base operand of '->' has non-pointer type 'bound_minimal_symbol'
+
+ ... because ms is not a pointer.
+
+ This commit fixes this error by using ms.value_address () instead.
+
+2022-05-20 Steinar H. Gunderson <sesse@google.com>
+
+ add a trie to map quickly from address range to compilation unit
+ When using perf to profile large binaries, _bfd_dwarf2_find_nearest_line()
+ becomes a hotspot, as perf wants to get line number information
+ (for inline-detection purposes) for each and every sample. In Chromium
+ in particular (the content_shell binary), this entails going through
+ 475k address ranges, which takes a long time when done repeatedly.
+
+ Add a radix-256 trie over the address space to quickly map address to
+ compilation unit spaces; for content_shell, which is 1.6 GB when some
+ (but not full) debug information turned is on, we go from 6 ms to
+ 0.006 ms (6 µs) for each lookup from address to compilation unit, a 1000x
+ speedup.
+
+ There is a modest RAM increase of 180 MB in this binary (the existing
+ linked list over ranges uses about 10 MB, and the entire perf job uses
+ between 2–3 GB for a medium-size profile); for smaller binaries with few
+ ranges, there should be hardly any extra RAM usage at all.
+
+2022-05-20 Alan Modra <amodra@gmail.com>
+
+ Tidy warn-execstack handling
+ Make ld and bfd values consistent by swapping values 0 and 2 in
+ link_info.warn_execstack. This has the benefit of making the value an
+ "extended" boolean, with 0 meaning no warning, 1 meaning warn, other
+ values a conditional warning.
+
+ Yes, this patch introduces fails on arm/aarch64. Not a problem with
+ this patch but an arm/aarch64 before_parse problem.
+
+ bfd/
+ * elflink.c (bfd_elf_size_dynamic_sections): Adjust
+ warn_execstack test.
+ include/
+ * bfdlink.h (warn_execstack): Swap 0 and 2 meaning.
+ ld/
+ * configure.ac (DEFAULT_LD_WARN_EXECSTACK): Use values of 0,
+ 1, 2 consistent with link_info.warn_execstack.
+ * ld.texi: Typo fixes.
+ * lexsup.c (parse_args): Adjust setting of link_info.warn_execstack.
+ (elf_static_list_options): Adjust help message conditions.
+ * configure: Regenerate.
+
+2022-05-20 GDB Administrator <gdbadmin@sourceware.org>
+
+ Automatic date update in version.in
+
+2022-05-19 Srinath Parvathaneni <srinath.parvathaneni@arm.com>
+
+ arm: Fix system register fpcxt_ns and fpcxt_s naming convention.
+ The current assembler accepts system registers FPCXTNS and FPCXTS for Armv8.1-M
+ Mainline Instructions VSTR, VLDR, VMRS and VMSR.
+ Assembler should be also allowing FPCXT_NS, fpcxt_ns, fpcxtns, FPCXT_S, fpcxt_s
+ and fpcxts. This patch fixes the issue.
+
+2022-05-19 Andrew Burgess <aburgess@redhat.com>
+
+ gdb/doc: use @value{GDBP} in 'info pretty-printer' example
+ Update the 'info pretty-printer' example in the manual to make use of
+ @value{GDBP} instead of hard-coding '(gdb)'.
+
+2022-05-19 Andrew Burgess <aburgess@redhat.com>
+
+ gdb/doc: make use of group/end group in 'info pretty-printers' example
+ The 'info pretty-printers' example is pretty long and consists of many
+ commands and their output.
+
+ Currently, when the pdf manual is generated this example spans a
+ page-break, with the page-break falling part way through some example
+ output from GDB.
+
+ This commit breaks up the example using @group .... @end group, within
+ each group is a single GDB command and all its output.
+
+ Now, when the pdf manual is created, the page-break is placed after
+ the output of one GDB command, and before the subsequent command, this
+ looks much nicer.
+
+2022-05-19 Nikolaos Chatzikonstantinou <nchatz314@gmail.com>
+
+ gdb/doc: fix inconsistent info pretty-printer example
+ The example for 'info pretty-printer' in the manual passes an
+ object-regexp in some cases, but presents output as though no
+ object-regexp was passed.
+
+ This commit fixes the two mistakes, in one case, fixing the output to
+ filter based on object-regexp, and in the other, to remove the
+ object-regexp from the command and leave all the output.
+
+2022-05-19 Nick Clifton <nickc@redhat.com>
+
+ Fix potentially uninitialised variables in the Windows tools
+
+2022-05-19 Tiezhu Yang <yangtiezhu@loongson.cn>
+
+ gdb: testsuite: Support displaced stepping on LoongArch
+ When execute the following command on LoongArch:
+
+ make check-gdb TESTS="gdb.base/async-shell.exp"
+
+ we can see the following message in gdb/testsuite/gdb.sum:
+
+ UNSUPPORTED: gdb.base/async-shell.exp: displaced stepping
+
+ modify support_displaced_stepping to support displaced stepping
+ on LoongArch.
+
+ With this patch:
+
+ PASS: gdb.base/async-shell.exp: run &
+ PASS: gdb.base/async-shell.exp: shell echo foo
+ PASS: gdb.base/async-shell.exp: interrupt
+ PASS: gdb.base/async-shell.exp: process stopped
+
+ I did the following tests that use support_displaced_stepping
+ with this patch on LoongArch, there is no failed testcases.
+
+ loongson@linux:~/gdb.git$ grep -r support_displaced_stepping gdb/testsuite/gdb.*
+ gdb/testsuite/gdb.arch/disp-step-insn-reloc.exp:if { ![support_displaced_stepping] } {
+ gdb/testsuite/gdb.base/step-over-no-symbols.exp: if { $displaced != "off" && ![support_displaced_stepping] } {
+ gdb/testsuite/gdb.base/moribund-step.exp:if { ![support_displaced_stepping] } {
+ gdb/testsuite/gdb.base/async-shell.exp:if { ![support_displaced_stepping] } {
+ gdb/testsuite/gdb.base/inferior-died.exp:if { ![support_displaced_stepping] } {
+ gdb/testsuite/gdb.base/step-over-syscall.exp: if {$displaced == "on" && ![support_displaced_stepping]} {
+ gdb/testsuite/gdb.mi/mi-watch-nonstop.exp:if { ![support_displaced_stepping] } {
+ gdb/testsuite/gdb.mi/mi-ns-stale-regcache.exp:if { ![support_displaced_stepping] } {
+ gdb/testsuite/gdb.mi/mi-nonstop.exp:if { ![support_displaced_stepping] } {
+ gdb/testsuite/gdb.mi/mi-nsmoribund.exp:if { ![support_displaced_stepping] } {
+ gdb/testsuite/gdb.mi/mi-nsintrall.exp:if { ![support_displaced_stepping] } {
+ gdb/testsuite/gdb.mi/mi-nsthrexec.exp:if { ![support_displaced_stepping] } {
+ gdb/testsuite/gdb.mi/mi-nonstop-exit.exp:if { ![support_displaced_stepping] } {
+ gdb/testsuite/gdb.multi/watchpoint-multi.exp:if [support_displaced_stepping] {
+ gdb/testsuite/gdb.python/py-evthreads.exp:if { ![support_displaced_stepping] } {
+ gdb/testsuite/gdb.threads/step-over-lands-on-breakpoint.exp: if { $displaced != "off" && ![support_displaced_stepping] } {
+ gdb/testsuite/gdb.threads/interrupt-while-step-over.exp: if { ${displaced-stepping} != "off" && ![support_displaced_stepping] } {
+ gdb/testsuite/gdb.threads/step-over-trips-on-watchpoint.exp: if { $displaced != "off" && ![support_displaced_stepping] } {
+
+2022-05-19 Simon Marchi <simon.marchi@polymtl.ca>
+
+ gdbsupport: fix path_join crash with -std=c++17 and -D_GLIBCXX_DEBUG
+ When building GDB with -std=c++17 and -D_GLIBCXX_DEBUG=1, I get:
+
+ $ ./gdb -nx --data-directory=data-directory -q -ex "maint selftest path_join"
+ /usr/include/c++/11.2.0/string_view:233: constexpr const value_type& std::basic_string_view<_CharT, _Traits>::operator[](std::basic_string_view<_CharT, _Traits>::size_type) const [with _CharT = char; _Traits = std::char_traits<char>; std::basic_string_view<_CharT, _Traits>::const_reference = const char&; std::basic_string_view<_CharT, _Traits>::size_type = long unsigned int]: Assertion '__pos < this->_M_len' failed.
+
+ The problem is that we're passing an empty string_view to
+ IS_ABSOLUTE_PATH. IS_ABSOLUTE_PATH accesses [0] on that string_view,
+ which is out-of-bounds.
+
+ The reason this is not seen with -std less than c++17 is that our local
+ copy of string_view (used with C++ < 17) does not have the assert in
+ operator[], as that wouldn't work in a constexpr method:
+
+ https://gitlab.com/gnutools/binutils-gdb/-/blob/5890af36e5112bcbb8d7555e63570f68466e6944/gdbsupport/gdb_string_view.h#L180
+
+ IS_ABSOLUTE_PATH is normally used with null-terminated string. It's
+ fine to pass an empty null-terminated string to IS_ABSOLUTE_PATH,
+ because index 0 in such a string is valid. But not with an empty
+ string_view.
+
+ Fix that by avoiding the "call" to IS_ABSOLUTE_PATH if the string_view
+ is empty.
+
+ Change-Id: Idf4df961b63f513b3389235e93814c02b89ea32e
+
+2022-05-19 Jan Beulich <jbeulich@suse.com>
+
+ Arm64: force emission of ILP32-dependent relocs
+ Like the placeholder types added in 04dfe7aa5217 ("Arm64: follow-on to
+ PR gas/27217 fix"), these are also placeholders which are subsequently
+ resolved (albeit later, hence this being a separate issue). As for the
+ resolved types 1 is returned, these pseudo-relocs should also have 1
+ returned to force retaining of the [eventual] relocations. This is also
+ spelled out individually for each of them in md_apply_fix().
+
+2022-05-19 Jan Beulich <jbeulich@suse.com>
+
+ COFF: use hash for string table also when copying / stripping
+ Otherwise the string table may grow and hence e.g. change a final binary
+ (observed with PE/COFF ones) even if really there's no change. Doing so
+ in fact reduces the overall amount of code, and in particular the number
+ of places which need to remain in sync.
+
+ Afaics there's no real equivalent to the "traditional_format" field used
+ when linking, so hashing is always enabled when copying / stripping.
+
+2022-05-19 Jan Beulich <jbeulich@suse.com>
+
+ COFF/PE: keep linker version during objcopy / strip
+ Neither of the tools is really a linker, so whatever was originally
+ recorded should be retained rather than being overwritten by these
+ tools' versions.
+
+ COFF/PE: don't leave zero timestamp after objcopy / strip
+ Fill the timestamp field suitably for _bfd_XXi_only_swap_filehdr_out().
+ Instead of re-arranging the present if(), fold this logic with that of
+ copying the optional header.
+
+2022-05-19 Jan Beulich <jbeulich@suse.com>
+
+ COFF: make objcopy / strip honor --keep-file-symbols
+ So far this option had no effect when used together with e.g.
+ --strip-debug. Set BSF_FILE on these symbols to change that.
+
+ While altering this also join two adjacent blocks of case labeled
+ statements with identical code.
+
+2022-05-19 Jan Beulich <jbeulich@suse.com>
+
+ don't over-align file positions of PE executable sections
+ When a sufficiently small alignment was specified via --file-alignment,
+ individual section alignment shouldn't affect placement within the file.
+ This involves first of all clearing D_PAGED for images when section and
+ file alignment together don't permit paging of the image. The involved
+ comparison against COFF_PAGE_SIZE in turn helped point out (through a
+ compiler warning) that 'page_size' should be of unsigned type (as in
+ particular FileAlignment is). This yet in turn pointed out a dubious
+ error condition (which is being deleted).
+
+ For the D_PAGED case I think the enforced file alignment may still be
+ too high, but I'm wary of changing that logic without knowing of
+ possible corner cases.
+
+ Furthermore file positions in PE should be independent of the alignment
+ recorded in section headers anyway. Otherwise there are e.g. anomalies
+ following commit 6f8f6017a0c4 ("PR27567, Linking PE files adds alignment
+ section flags to executables") in that linking would use information a
+ subsequent processing step (e.g. stripping) wouldn't have available
+ anymore, and hence a binary could change in that 2nd step for no actual
+ reason. (Similarly stripping a binary linked with a linker pre-dating
+ that commit would change the binary again when stripping it a 2nd time.)
+
+2022-05-19 Yvan Roux <yvan.roux@foss.st.com>
+
+ _bfd_real_fopen should not use ccs parameter on Windows
+ PR 25713
+ * bfdio.c (_bfd_real_fopen): Delete ccs string.
+
+2022-05-19 Tsukasa OI <research_trasio@irq.a4lg.com>
+
+ RISC-V: Fix canonical extension order (K and J)
+ This commit fixes canonical extension order to follow the RISC-V ISA
+ Manual draft-20210402-1271737 or later.
+
+ bfd/ChangeLog:
+
+ * elfxx-riscv.c (riscv_recognized_prefixed_ext): Fix "K" extension
+ prefix to be placed before "J".
+
+2022-05-19 GDB Administrator <gdbadmin@sourceware.org>
+
+ Automatic date update in version.in
+
+2022-05-18 John Baldwin <jhb@FreeBSD.org>
+
+ Use aarch64_features to describe register features in target descriptions.
+ Replace the sve bool member of aarch64_features with a vq member that
+ holds the vector quotient. It is zero if SVE is not present.
+
+ Add std::hash<> specialization and operator== so that aarch64_features
+ can be used as a key with std::unordered_map<>.
+
+ Change the various functions that create or lookup aarch64 target
+ descriptions to accept a const aarch64_features object rather than a
+ growing number of arguments.
+
+ Replace the multi-dimension tdesc_aarch64_list arrays used to cache
+ target descriptions with unordered_maps indexed by aarch64_feature.
+
+2022-05-18 Jan Beulich <jbeulich@suse.com>
+
+ Arm64: follow-on to PR gas/27217 fix
+ PR gas/27217
+
+ Prior to trying to address PR gas/28888 I noticed anomalies in how
+ certain insns would / wouldn't be affected in similar ways.
+
+ Commit eac4eb8ecb26 ("Fix a problem assembling AArch64 sources when a
+ relocation is generated against a symbol that has a defined value") had
+ two copy-and-paste mistakes, passing the wrong type to
+ aarch64_force_reloc().
+
+ It further failed to add placeholder relocation types to that function's
+ block of case labels leading to a return of 1. While not of interest for
+ aarch64_force_relocation() (these placeholders are resolved right in
+ parse_operands()), calls to aarch64_force_reloc() happen before that
+ resolution would take place.
+
+2022-05-18 Nick Clifton <nickc@redhat.com>
+
+ Fix compile time warning building gold with Clang-14.
+ * int_encoding.cc (get_length_as_unsigned_LEB_128): Remove
+ current_length variable.
+
+2022-05-18 Victor Do Nascimento <victor.donascimento@arm.com>
+
+ oops - forgot changelog entry for the previous delta.
+
+ arm: Add unwind support for mixed register lists
+ * config/tc-arm.c (parse_reg_list): Add handling of mixed register
+ types.
+ (reg_names): Enumerate pseudoregister according to mapped physical
+ register number.
+ (s_arm_unwind_save_pseudo): Modify function signature.
+ (s_arm_unwind_save_core): Likewise.
+ (s_arm_unwind_save_mixed): New function.
+ (s_arm_unwind_save): Generate register list mask to pass to nested
+ functions.
+ * testsuite/gas/arm/unwind-pacbti-m.s: Expand test for mixed
+ register type lists.
+ * testsuite/gas/arm/unwind-pacbti-m.d: Likewise.
+ * testsuite/gas/arm/unwind-pacbti-m-readelf.d: Likewise.
+
+2022-05-18 Carl Love <cel@us.ibm.com>
+
+ PowerPC: bp-permanent.exp, kill-after-signal fix
+ Fix changes that didn't make it into commit:
+ dd9cd55e990bcc9f8448cac38d242d53974b3604.
+
+ Fix missing -wrap on gdb_test_multiple in gdb.base/kill-after-signal.exp
+ that is causing regression test on x86_64-linux with taskset -c 0.
+
+2022-05-18 Yichao Yu <yyc1992@gmail.com>
+
+ [AArch64] Return the regnum for PC (32) on aarch64
+ This will allow the unwind info to explicitly specify a different value
+ for the return address from the link register.
+ Such usage, although uncommon, is valid and useful for signal frames.
+ It is also supported by aadwarf64 from ARM (Note 9 in [1]).
+
+ Ref https://sourceware.org/pipermail/gdb/2022-May/050091.html
+
+ [1] https://github.com/ARM-software/abi-aa/blob/2022Q1/aadwarf64/aadwarf64.rst#dwarf-register-names
+
+2022-05-18 Jan Beulich <jbeulich@suse.com>
+
+ x86: shrink op_riprel
+ It is only ever initialized from a boolean, so it as well as related
+ variables' types can simply be bool and there's no masking to 32 bits
+ needed in set_op().
+
+2022-05-18 Nick Clifton <nickc@redhat.com>
+
+ Add a --no-weak option to nm.
+ PR 29135
+ * nm.c (non_weak): New variable.
+ (filter_symbols): When non-weak is true, ignore weak symbols.
+ (long_options): Add --no-weak.
+ (usage): Mention --no-weak.
+ (main): Handle -W/--no-weak.
+ * doc/binutils.texi: Document new feature.
+ * NEWS: Mention the new feature.
+ * testsuite/binutils-all/nm.exp: Add test of new feature.
+ * testsuite/binutils-all/no-weak.s: New test source file.
+
+2022-05-18 Pedro Alves <pedro@palves.net>
+
+ Support -prompt and -lbl in gdb_test
+ This teaches gdb_test to forward the -prompt and -lbl options to
+ gdb_test_multiple.
+
+ The option parsing is done with parse_args.
+
+ As a cleanup, instead of using llength and lindex to get at the
+ positional arguments, use lassign, and check whether the corresponding
+ variable is empty.
+
+ Convert gdb.base/ui-redirect.exp and gdb.xml/tdesc-reload.exp to use
+ gdb_test -prompt/-lbl instead of gdb_test_multiple as examples.
+
+ Change-Id: I243e1296d32c05a421ccef30b63d43a89eaeb4a0
+
+2022-05-18 Luis Machado <luis.machado@arm.com>
+
+ Remove unused DWARF PAUTH registers
+ The AARCH64_DWARF_PAUTH_DMASK and AARCH64_DWARF_PAUTH_CMASK DWARF registers
+ never made their way into the aadwarf64. The following patch removes these
+ constants and their use.
+
+ Bug: https://sourceware.org/bugzilla/show_bug.cgi?id=26295
+
+2022-05-18 Luis Machado <luis.machado@arm.com>
+
+ Rename PAUTH_RA_STATE to RA_SIGN_STATE
+ The aadwarf64 [1] names this register RA_SIGN_STATE, so update the code to use
+ the same name.
+
+ [1] https://github.com/ARM-software/abi-aa/blob/main/aadwarf64/aadwarf64.rst
+
+2022-05-18 Tom de Vries <tdevries@suse.de>
+
+ [gdb/testsuite] Simplify unknown lang testing in gdb.base/parse_number.exp
+ Move testing of language unknown out of the $supported_archs loop in
+ gdb.base/parse_number.exp. This reduces total amount of tests from 18466 to
+ 17744.
+
+ Tested on x86_64-linux.
+
+2022-05-18 Tom de Vries <tdevries@suse.de>
+
+ [gdb/testsuite] Use hex_for_lang in gdb.base/parse_number.exp
+ In gdb.base/parse_number.exp, add a new proc hex_for_lang that formats a hex
+ number appropriately for a given language.
+
+ Tested on x86_64-linux.
+
+2022-05-18 Tom de Vries <tdevries@suse.de>
+
+ [gdb/tdep] Add gdb/syscalls/update-linux-from-src.sh
+ Add a new script gdb/syscalls/update-linux-from-src.sh, that can be used to
+ generate *-linux.xml.in files from linux kernel sources, like so:
+ ...
+ $ ./update-linux-from-src.sh ~/upstream/linux-stable.git
+ Skipping aarch64-linux.xml.in, no syscall.tbl
+ Generating amd64-linux.xml.in
+ Skipping arm-linux.xml.in, use arm-linux.py instead
+ Skipping bfin-linux.xml.in, no longer supported
+ Generating i386-linux.xml.in
+ Generating mips-n32-linux.xml.in
+ Generating mips-n64-linux.xml.in
+ Generating mips-o32-linux.xml.in
+ Generating ppc64-linux.xml.in
+ Generating ppc-linux.xml.in
+ Generating s390-linux.xml.in
+ Generating s390x-linux.xml.in
+ Generating sparc64-linux.xml.in
+ Generating sparc-linux.xml.in
+ ...
+
+ Update *-linux.xml.in and *-linux.xml using linux kernel tag v5.18-rc6.
+
+2022-05-18 Tamar Christina <tamar.christina@arm.com>
+
+ AArch64: Enable FP16 by default for Armv9-A.
+ In Armv9-A SVE is mandatory, and for SVE FP16 is mandatory. This fixes a disconnect
+ between GCC and binutils where GCC has FP16 on by default and gas doesn't.
+
+ include/ChangeLog:
+
+ 2022-05-16 Tamar Christina <tamar.christina@arm.com>
+
+ * opcode/aarch64.h (AARCH64_ARCH_V9_FEATURES): Add AARCH64_FEATURE_F16.
+
+2022-05-18 Jan Beulich <jbeulich@suse.com>
+
+ gas: avoid octal numbers being accepted when processing .linefile
+ Compilers would put decimal numbers there, so I think we should treat
+ finding octal numbers the same as finding bignums - ignore them as
+ actually being comments of some very specific form.
+
+2022-05-18 Jan Beulich <jbeulich@suse.com>
+
+ gas: avoid bignum related errors when processing .linefile
+ Any construct which to the scrubber looks like a C preprocessor
+ line/file "directive" is converted to .linefile, but the amount of
+ checking the scrubber does is minimal (albeit it does let through only
+ decimal digits for the line part of the contruct). Since the scrubber
+ conversion is further tied to # being a line comment character, anything
+ which upon closer inspection turns out not to be a line/file "directive"
+ is supposed to be treated as a comment, i.e. ignored. Therefore we
+ cannot use get_absolute_expression(), as this may raise errors. Open-
+ code the function instead, treating everything not resulting in
+ O_constant as a comment as well.
+
+ Furthermore also bounds-check the parsed value. This bounds check tries
+ to avoid implementation defined behavior (which may be the raising of an
+ implementation defined signal), but for now makes the assumption that
+ int has less than 64 bits. The way bfd_signed_vma (which is what offsetT
+ aliases) is defined in bfd.h for the BFD64 case I cannot really see a
+ clean way of avoiding this assumption. Omitting the #ifdef, otoh, would
+ risk "condition is always false" warnings by compilers.
+
+ Convert get_linefile_number() to return bool at this occasion as well.
+
+2022-05-18 Jan Beulich <jbeulich@suse.com>
+
+ gas: fold do_repeat{,_with_expander}()
+ do_repeat_with_expander() already deals with the "no expander" case
+ quite fine, so there's really little point having two functions. What it
+ lacks compared with do_repeat() is a call to sb_build(), which can
+ simply be moved (and the then redundant sb_new() be avoided). Along with
+ this moving also flip if the main if()'s condition such that the "no
+ expander" case is handled first.
+
+ gas: don't ignore .linefile inside false conditionals
+ When assembling code previously pre-processed by a C compiler, long
+ enough comments may have been collapsed into "# <line> <file>"
+ constructs. If we skip these, line numbers (and possibly even file
+ names) will be off / wrong in both diagnostics and debug info.
+
+ gas: simplify ignore_input()
+ First of all convert to switch(), in preparation of adding another
+ directive here which may not be ignored. While doing so drop dead code:
+ A string the first two characters of which do not match "if" also wont
+ match "ifdef" or "ifndef".
+
+ gas: tweak .irp and alike file/line handling for M68K/MRI
+ In commit 2ee1792bec22 ("gas: further adjust file/line handling for .irp
+ and alike") I neglected the need to omit the leading . in M68K/MRI mode.
+
+2022-05-18 Xi Ruoyao <xry111@mengyan1223.wang>
+
+ gold: don't invoke IA32 syscall in x86_64 assembly testcase
+ pr17704a_test.s is a x86_64 assembly file, but it invokes IA32 exit
+ syscall with "int 0x80". This causes a segfault on kernels with
+ CONFIG_IA32_EMULATION disabled.
+
+ gold/
+
+ * testsuite/pr17704a_test.s (_start): Invoke x86_64 exit syscall
+ instead of its IA32 counterpart.
+
+2022-05-18 GDB Administrator <gdbadmin@sourceware.org>
+
+ Automatic date update in version.in
+
+2022-05-17 Nikolaos Chatzikonstantinou <nchatz314@gmail.com>
+
+ Fix typo in info page
+
+2022-05-17 Pedro Alves <pedro@palves.net>
+
+ Fix gdb.python/py-connection.exp with remote targets
+ After the patch to make gdb_test's question non-optional when
+ specified, gdb.python/py-connection.exp started failing like so:
+
+ $ make check TESTS="gdb.python/py-connection.exp" RUNTESTFLAGS="--target_board=native-gdbserver"
+ (gdb) PASS: gdb.python/py-connection.exp: info connections while the connection is still around
+ disconnect^M
+ Ending remote debugging.^M
+ (gdb) FAIL: gdb.python/py-connection.exp: kill the inferior
+
+ The problem is that "disconnect" when debugging with the native target
+ asks the user whether to kill the program, while with remote targets,
+ it doesn't.
+
+ Fix it by explicitly killing before disconnecting.
+
+ Tested with --target_board unix, native-gdbserver, and native-extended-gdbserver.
+
+ Change-Id: Icd85015c76deb84b71894715d43853c1087eba0b
+
+2022-05-17 Felix Willgerodt <felix.willgerodt@intel.com>
+
+ gdb, btrace: Throw an error for empty recordings when replaying starts.
+ This makes record_btrace_start_replaying() more consistent, as it already
+ errors out e.g. on a recording with only gaps.
+
+2022-05-17 Pedro Alves <pedro@palves.net>
+
+ Make gdb_test's question non-optional if specified
+ gdb_test supports handling scenarios where GDB asks a question before
+ finishing handling some command. The full prototype of gdb_test is:
+
+ # gdb_test COMMAND PATTERN MESSAGE QUESTION RESPONSE
+
+ However, QUESTION is a question that GDB _may_ ask, not one that GDB
+ _must_ ask:
+
+ # QUESTION is a question GDB may ask in response to COMMAND, like
+ # "are you sure?"
+ # RESPONSE is the response to send if QUESTION appears.
+
+ If GDB doesn't raise the question, the test still passes.
+
+ I think that this is a misfeature. If GDB regresses and stops asking
+ a question, the testsuite won't notice. So I think that if a QUESTION
+ is specified, gdb_test should ensure it comes out of GDB.
+
+ Running the testsuite exposed a number of tests that pass
+ QUESTION/RESPONSE to GDB, but no question comes out. The previous
+ commits fixed them all, so this commit changes gdb_test's behavior.
+
+ A related issue is that gdb_test doesn't enforce that if you specify
+ QUESTION, that you also specify RESPONSE. I.e., you should pass 1, 2,
+ 3, or 5 arguments to gdb_test, but never 4, or more than 5. Making
+ gdb_test detect bogus arguments actually regressed some testcases,
+ also all fixed in previous commits.
+
+ Change-Id: I47c39c9034e6a6841129312037a5ca4c5811f0db
+
+2022-05-17 Pedro Alves <pedro@palves.net>
+
+ gdb.base/skip.exp: Don't abuse gdb_test's question support
+ gdb.base/skip.exp abuses gdb_test's support for answering a GDB
+ question to do this:
+
+ # With gcc 9.2.0 we jump once back to main before entering foo here.
+ # If that happens try to step a second time.
+ gdb_test "step" "foo \\(\\) at.*" "step 3" \
+ "main \\(\\) at .*\r\n$gdb_prompt " "step"
+
+ After a patch later in this series, gdb_test will FAIL if GDB does NOT
+ issue the question, so this test would start failing on older GCCs.
+
+ Switch to using gdb_test_multiple instead. There are three spots in
+ the file that have the same pattern, and they're actually in a
+ sequence of commands that is repeated those 3 times. Factor all that
+ out to a procedure.
+
+ I don't have gcc 9.2 handy, but I do have gcc 6.5, and that one is
+ affected as well, so update the comment.
+
+ Change-Id: If0a7e3cdf5191b4eec95ce0c8845c3a4d801c39e
+
+2022-05-17 Pedro Alves <pedro@palves.net>
+
+ Avoid having to unload file in gdb.server/connect-with-no-symbol-file.exp
+ gdb.server/connect-with-no-symbol-file.exp's connect_no_symbol_file
+ does:
+
+ gdb_test "file" ".*" "discard symbol table" \
+ {Discard symbol table from `.*'\? \(y or n\) } "y"
+
+ A following patch will make gdb_test expect the question out of GDB if
+ one is passed down as argument to gdb_test. With that, this test
+ starts failing. This is because connect_no_symbol_file is called in a
+ loop, and the first time around, there's a loaded file, so "file" asks
+ the "Discard symbol table ... ?" question, while in the following
+ iterations there's no file, so there's no question.
+
+ Fix this by not loading a file into GDB in the first place.
+
+ Change-Id: I810c036b57842c4c5b47faf340466b0d446d1abc
+
+2022-05-17 Pedro Alves <pedro@palves.net>
+
+ Fix bogus gdb_test invocations
+ A following patch will make gdb_test error out if bogus arguments are
+ passed, which exposed bugs in a few testcases:
+
+ - gdb.python/py-parameter.exp, passing a spurious "1" as extra
+ parameter, resulting in:
+
+ ERROR: Unexpected arguments: {set test-file-param bar.txt} {The name of the file has been changed to bar.txt} {set new file parameter} 1
+
+ - gdb.python/py-xmethods.exp, a missing test message, resulting in
+ the next gdb_test being interpreted as message, question and
+ response! With the enforcing patch, this was caught with:
+
+ ERROR: Unexpected arguments: {p g.mul<char>('a')} {From Python G<>::mul.*} gdb_test {p g_ptr->mul<char>('a')} {From Python G<>::mul.*} {after: g_ptr->mul<char>('a')}
+
+ - gdb.base/pointers.exp, missing a quote.
+
+ Change-Id: I66f2db4412025a64121db7347dfb0b48240d46d4
+
+2022-05-17 Pedro Alves <pedro@palves.net>
+
+ gdb.base/scope.exp: Remove bogus gdb_test questions
+ This test is abusing the QUESTION/RESPONSE feature to send an
+ alternative command to GDB if the first command fails. Like so:
+
+ gdb_test "print 'scope0.c'::filelocal" \
+ "\\\$$decimal = 1" "print 'scope0.c'::filelocal at main" \
+ "No symbol \"scope0.c\" in current context.*" \
+ "print '$srcdir/$subdir/scope0.c'::filelocal"
+
+ So if 'scope0.c' doesn't work, we try again with
+ '$srcdir/$subdir/scope0.c'. I strongly suspect this is really an
+ obsolete test. I think that if '$srcdir/$subdir/scope0.c' works, then
+ 'scope0.c' should have worked too, thus I'd think that if we pass due
+ to the question path, then it's a bug. So just remove the question
+ part passed to gdb_test.
+
+ Change-Id: I2acc99285f1d519284051b49693b5441fbdfe3cd
+
+2022-05-17 Pedro Alves <pedro@palves.net>
+
+ Remove gdb_test questions that GDB doesn't ask
+ Change-Id: Ib2616dc883e9dc9ee100f6c86d83a921a0113c16
+
+2022-05-17 Nelson Chu <nelson.chu@sifive.com>
+
+ RISC-V: Added half-precision floating-point v1.0 instructions.
+ bfd/
+ * elfxx-riscv.c (riscv_implicit_subsets): Added implicit f
+ and zicsr for zfh.
+ (riscv_supported_std_z_ext): Added default v1.0 version for zfh.
+ (riscv_multi_subset_supports): Handle INSN_CLASS_ZFH,
+ INSN_CLASS_D_AND_ZFH and INSN_CLASS_Q_AND_ZFH.
+ gas/
+ * config/tc-riscv.c (FLT_CHARS): Added "hH".
+ (macro): Expand Pseudo M_FLH and M_FSH.
+ (riscv_pseudo_table): Added .float16 directive.
+ * testsuite/gas/riscv/float16-be.d: New testcase for .float16.
+ * testsuite/gas/riscv/float16-le.d: Likewise.
+ * testsuite/gas/riscv/float16.s: Likewise.
+ * testsuite/gas/riscv/fp-zfh-insns.d: New testcase for zfh.
+ * testsuite/gas/riscv/fp-zfh-insns.s: Likewise.
+ include/
+ * opcode/riscv-opc.h: Added MASK and MATCH encodings for zfh.
+ * opcode/riscv.h: Added INSN_CLASS and pseudo macros for zfh.
+ opcodes/
+ * riscv-opc.c (riscv_opcodes): Added zfh instructions.
+
+2022-05-17 GDB Administrator <gdbadmin@sourceware.org>
+
+ Automatic date update in version.in
+
+2022-05-16 Ilya Leoshkevich <iii@linux.ibm.com>
+
+ IBM zSystems: Fix left-shifting negative PCRel32 values (PR gas/29152)
+ s390_insert_operand ()'s val, min and max are encoded PCRel32 values
+ and need to be left-shifted by 1 before being shown to the user.
+ Left-shifting negative values is undefined behavior in C, but the
+ current code does not try to prevent it, causing UBSan to complain.
+
+ Fix by casting the values to their unsigned equivalents before
+ shifting.
+
+2022-05-16 Pedro Alves <pedro@palves.net>
+
+ Reindent gdbsupport/event-loop.cc:handle_file_event
+ The handle_file_event function has a few unnecessary {} lexical
+ blocks, presumably because they were originally if blocks, and the
+ conditions were removed, or something along those lines.
+
+ Remove the unnecessary blocks, and reindent.
+
+ Change-Id: Iaecbe5c9f4940a80b81dbbc42e51ce506f6aafb2
+
+2022-05-16 Pedro Alves <pedro@palves.net>
+
+ gdbsupport/event-loop.cc: simplify !HAVE_POLL paths
+ gdbsupport/event-loop.cc throughout handles the case of use_poll being
+ true on a system where HAVE_POLL is not defined, by calling
+ internal_error if that situation ever happens.
+
+ Simplify this by moving the "use_poll" global itself under HAVE_POLL,
+ so that it's way more unlikely to ever end up in such a situation.
+ Then, move the code that checks the value of use_poll under HAVE_POLL
+ too, and remove the internal_error calls. Like, from:
+
+ if (use_poll)
+ {
+ #ifdef HAVE_POLL
+ // poll code
+ #else
+ internal_error (....);
+ #endif /* HAVE_POLL */
+ }
+ else
+ {
+ // select code
+ }
+
+ to
+
+ #ifdef HAVE_POLL
+ if (use_poll)
+ {
+ // poll code
+ }
+ else
+ #endif /* HAVE_POLL */
+ {
+ // select code
+ }
+
+ While at it, make use_poll be a bool. The current code is using
+ unsigned char most probably to save space, but I don't think it really
+ matters here.
+
+ Co-Authored-By: Youling Tang <tangyouling@loongson.cn>
+ Change-Id: I0dd74fdd4d393ccd057906df4cd75e8e83c1cdb4
+
+2022-05-16 Eli Zaretskii <eliz@gnu.org>
+
+ gdb: Fix typo in last change in gdb.texinfo
+
+ gdb: Document the 'metadata' styling in GDB displays.
+ The 'metadata' styling was never documented in the GDB manual.
+ This fills that gap.
+
+2022-05-16 Tom Tromey <tromey@adacore.com>
+
+ Fix Ada exception regression on Windows
+ The breakpoint c++-ification series introduced another bug in Ada --
+ it caused "catch exception" and related commands to fail on Windows.
+ The problem is that the re_set method calls the wrong superclass
+ method, so the breakpoint doesn't get correctly re-set when the
+ runtime offsets change. This patch fixes the problem.
+
+2022-05-16 Bruno Larsen <blarsen@redhat.com>
+
+ gdb/testsuite: fix "continue outside of loop" TCL errors
+ Many test cases had a few lines in the beginning that look like:
+
+ if { condition } {
+ continue
+ }
+
+ Where conditions varied, but were mostly in the form of ![runto_main] or
+ [skip_*_tests], making it quite clear that this code block was supposed
+ to finish the test if it entered the code block. This generates TCL
+ errors, as most of these tests are not inside loops. All cases on which
+ this was an obvious mistake are changed in this patch.
+
+2022-05-16 GDB Administrator <gdbadmin@sourceware.org>
+
+ Automatic date update in version.in
+
+2022-05-15 GDB Administrator <gdbadmin@sourceware.org>
+
+ Automatic date update in version.in
+
+2022-05-14 GDB Administrator <gdbadmin@sourceware.org>
+
+ Automatic date update in version.in
+
+2022-05-13 Tom Tromey <tromey@adacore.com>
+
+ Remove unused field cooked_index::m_start
+ cooked_index::m_start is unused and can be removed. I think this was
+ a leftover from a previous approach in the index finalization code,
+ and then when rewriting it I forgot to remove it.
+
+ Tested by rebuilding.
+
+2022-05-13 Tom Tromey <tromey@adacore.com>
+
+ Implement pid_to_exec_file for Windows in gdbserver
+ I noticed that gdbserver did not implement pid_to_exec_file for
+ Windows, while gdb did implement it. This patch moves the code to
+ nat/windows-nat.c, so that it can be shared. This makes the gdbserver
+ implementation trivial.
+
+ Remove windows_process_info::id
+ I noticed that windows_process_info::id is only used by gdbserver, and
+ not really necessary. This patch removes it.
+
+ Constify target_pid_to_exec_file
+ This changes target_pid_to_exec_file and target_ops::pid_to_exec_file
+ to return a "const char *". I couldn't build many of these targets,
+ but did examine the code by hand -- also, as this only affects the
+ return type, it's normally pretty safe. This brings gdb and gdbserver
+ a bit closer, and allows for the removal of a const_cast as well.
+
+ Put corefile-run.core into test subdirectory
+ I noticed that corefile-run.core ends up in the 'runtest' directory.
+ It's better, when at all possible, for test files to end up in the
+ test's designated subdirectory. This patch makes this change.
+
+2022-05-13 Tom Tromey <tromey@adacore.com>
+
+ Do not double-read minimal symbols for PE COFF
+ This changes coffread.c to avoid re-reading minimal symbols when
+ possible. This only works when there are no COFF symbols to be read,
+ but at least for my mingw builds of gdb, this seems to be the case.
+
+ Tested using the AdaCore internal test suite on Windows. I also did
+ some local builds to ensure that no warnings crept in.
+
+2022-05-13 Pedro Alves <pedro@palves.net>
+
+ Fix "gdb --write" with core files
+ If you load a core file into GDB with the --write option, or "set
+ write on" (equivalent), and then poke memory expecting it to patch the
+ core binary, you'll notice something odd -- the write seems to
+ succeed, but in reality, it doesn't. The value you wrote doesn't
+ persist. Like so:
+
+ $ gdb -q --write -c testsuite/outputs/gdb.base/patch/gcore.test
+ [New LWP 615986]
+ Core was generated by `/home/pedro/gdb/build/gdb/testsuite/outputs/gdb.base/patch/patch'.
+ Program terminated with signal SIGTRAP, Trace/breakpoint trap.
+ #0 0x0000555555555131 in ?? ()
+ (gdb) p *(unsigned char *)0x0000555555555131 = 1
+ $1 = 1 '\001'
+ (gdb) p *(unsigned char *)0x0000555555555131
+ $2 = 185 '\271'
+ (gdb)
+
+ Diffing hexdumps of before/after patching, reveals that a "0x1" was
+ actually written somewhere in the file. The problem is that the "0x1"
+ was written at the wrong offset in the file...
+
+ That happens because _bfd_elf_set_section_contents does this to seek
+ to the section's offset:
+
+ pos = hdr->sh_offset + offset;
+ if (bfd_seek (abfd, pos, SEEK_SET) != 0
+ || bfd_bwrite (location, count, abfd) != count)
+ return false;
+
+ ... and 'hdr->sh_offset' is zero, so we seek to just OFFSET, which is
+ incorrect. The reason 'hdr->sh_offset' is zero is that
+ kernel-generated core files normally don't even have a section header
+ table (gdb-generated ones do, but that's more an accident than a
+ feature), and indeed elf_core_file_p doesn't even try to read sections
+ at all:
+
+ /* Core files are simply standard ELF formatted files that partition
+ the file using the execution view of the file (program header table)
+ rather than the linking view. In fact, there is no section header
+ table in a core file.
+
+ The process status information (including the contents of the general
+ register set) and the floating point register set are stored in a
+ segment of type PT_NOTE. We handcraft a couple of extra bfd sections
+ that allow standard bfd access to the general registers (.reg) and the
+ floating point registers (.reg2). */
+
+ bfd_cleanup
+ elf_core_file_p (bfd *abfd)
+
+ Changing _bfd_elf_set_section_contents from:
+
+ pos = hdr->sh_offset + offset;
+
+ to:
+
+ pos = section->filepos + offset;
+
+ fixes it. If we do that however, the tail end of
+ _bfd_elf_set_section_contents ends up as a copy of
+ _bfd_generic_set_section_contents, so just call the latter, thus
+ eliminating some duplicate code.
+
+ New GDB testcase included, which exercises both patching an executable
+ and patching a core file. Patching an executable already works
+ without this fix, because in that case BFD reads in the sections
+ table. Still, we had no testcase for that yet. In fact, we have no
+ "set write on" testcases at all, this is the first one.
+
+ Tested on x86-64 GNU/Linux, gdb, ld, binutils, and gas.
+
+ Bug: https://sourceware.org/bugzilla/show_bug.cgi?id=18227
+ Change-Id: I0f49f58b48aabab2e269f2959b8fd8a7fe36fdce
+
+2022-05-13 Alan Modra <amodra@gmail.com>
+
+ Import libiberty from gcc
+
+ sim: remove use of PTR
+ PTR will soon disappear from ansidecl.h. Remove uses in sim. Where
+ a PTR cast is used in assignment or function args to a void* I've
+ simply removed the unnecessary (in C) cast rather than replacing with
+ (void *).
+
+2022-05-13 GDB Administrator <gdbadmin@sourceware.org>
+
+ Automatic date update in version.in
+
+2022-05-13 Alan Modra <amodra@gmail.com>
+
+ gdb: remove use of PTR
+ PTR will disappear from ansidecl.h and libiberty on the next import
+ from gcc. Remove current uses in gdb.
+
+2022-05-12 Tom de Vries <tdevries@suse.de>
+
+ [gdb/testsuite] Fix gdb.cp/break-f-std-string.cc with older gcc
+ When running test-case gdb.cp/break-f-std-string.exp on openSUSE Leap 15.3
+ with system gcc 7.5.0, I run into:
+ ...
+ (gdb) whatis /r std::string^M
+ No symbol "string" in namespace "std".^M
+ (gdb) FAIL: gdb.cp/break-f-std-string.exp: _GLIBCXX_USE_CXX11_ABI=1: \
+ whatis /r std::string
+ ...
+ The same for gcc 8.2.1, but it passes with gcc 9.3.1.
+
+ At source level (as we can observe in the .ii file with -save-temps) we have
+ indeed:
+ ...
+ namespace std {
+ namespace __cxx11 {
+ typedef basic_string<char> string;
+ }
+ }
+ ...
+ while with gcc 9.3.1, we have instead:
+ ...
+ namespace std {
+ namespace __cxx11 {
+ ...
+ }
+ typedef basic_string<char> string;
+ }
+ ...
+ due to gcc commit 33b43b0d8cd ("Define std::string and related typedefs
+ outside __cxx11 namespace").
+
+ Fix this by adding the missing typedef for gcc version 5 (the first version to
+ have the dual abi) to 8 (the last version missing aforementioned gcc commit).
+
+ Tested on x86_64-linux, with:
+ - system gcc 7.5.0
+ - gcc 4.8.5, 8.2.1, 9.3.1, 10.3.0, 11.2.1
+ - clang 8.0.1, 12.0.1
+
+2022-05-12 Alan Modra <amodra@gmail.com>
+
+ Fix an illegal memory access when creating DLLs.
+ PR 29006
+ * pe-dll.c (dll_name): Delete, replacing with..
+ (dll_filename): ..this, moved earlier in file.
+ (generate_edata): Delete parameters. Don't set up dll_name here..
+ (pe_process_import_defs): ..instead set up dll_filename and
+ dll_symname here before returning.
+ (dll_symname_len): Delete write-only variable.
+ (pe_dll_generate_implib): Don't set up dll_symname here.
+
+2022-05-12 Mark Wielaard <mark@klomp.org>
+
+ gdb: Workaround stringop-overread warning in debuginfod-support.c on powerpc64
+ Just like on s390x with g++ 11.2.1, ppc64le with g++ 11.3.1 produces a
+ spurious warning for stringop-overread in debuginfod_is_enabled
+ for url_view. Also suppress it on powerpc64.
+
+ gdb/ChangeLog:
+
+ * debuginfod-support.c (debuginfod_is_enabled): Use
+ DIAGNOSTIC_IGNORE_STRINGOP_OVERREAD on powerpc64.
+
+2022-05-12 Luis Machado <luis.machado@arm.com>
+
+ Make gdb.ada/float-bits.exp more generic
+ There are assumptions in the test about the long double format
+ being used. While the results are OK for i387 128-bit long doubles, it
+ is not correct for IEEE quad 128-bit long doubles.
+
+ Also, depending on the target (64-bit/32-bit), long doubles may not
+ be available at all. And it may be the case that the compiler for a 64-bit
+ target doesn't support 128-bit long doubles, but GDB might still support it
+ internally.
+
+ Lastly, not every long double format has invalid values. Some formats
+ consider all values as valid floating point numbers.
+
+ These divergences cause the following FAIL's on aarch64/arm:
+
+ FAIL: gdb.ada/float-bits.exp: print val_long_double
+ FAIL: gdb.ada/float-bits.exp: print val_long_double after assignment
+
+ With the above in mind, extend the test a little so it behaves well on
+ different architectures and so it works with different long double
+ formats.
+
+ Main changes:
+
+ - Use long double values appropriate for the long double format.
+ - Test long double assignment to compiler-generated long
+ double variables.
+ - Test long double assignment to GDB internal variables.
+
+ Tested on x86_64 (16 PASS), i686 (16 PASS), aarch64 (12 PASS) and arm (9 PASS).
+
+2022-05-12 Tom de Vries <tdevries@suse.de>
+
+ [gdb/tdep] Improve gdb/syscalls/update-linux.sh
+ Fix two things in update-linux.sh:
+ - remove use of unnecessary tmp file
+ - inline gen-header.py into update-linux.sh
+
+ Tested on x86_64-linux.
+
+2022-05-12 Tom de Vries <tdevries@suse.de>
+
+ [gdb/testsuite] Fix gdb.dwarf2/dw2-out-of-range-end-of-seq.exp on aarch64
+ On aarch64-linux, with test-case gdb.dwarf2/dw2-out-of-range-end-of-seq.exp I
+ run into:
+ ...
+ (gdb) run ^M
+ Starting program: dw2-out-of-range-end-of-seq ^M
+ ^M
+ Program received signal SIGILL, Illegal instruction.^M
+ main () at src/gdb/testsuite/gdb.dwarf2/main.c:1^M
+ 1 /* This testcase is part of GDB, the GNU debugger.^M
+ (gdb) FAIL: gdb.dwarf2/dw2-out-of-range-end-of-seq.exp: runto: run to main
+ ...
+
+ There are two problems here:
+ - the test-case contains a hardcoded "DW_LNS_advance_pc 1" which causes the
+ breakpoint pointing in the middle of an insn
+ - the FAIL triggers on aarch64-linux, but not on x86_64-linux, because the
+ test-case uses 'main_label' as the address of the first and only valid entry
+ in the line table, and:
+ - on aarch64-linux, there's no prologue, so main_label and main coincide,
+ while
+ - on x86_64-linux, there's a prologue, so main_label is different from main.
+
+ Fix these problems by:
+ - eliminating the use of "DW_LNS_advance_pc 1", and using
+ "DW_LNE_set_address $main_end" instead, and
+ - eliminating the use of main_label, using "DW_LNE_set_address $main_start"
+ instead.
+
+ Tested on both x86_64-linux and aarch64-linux.
+
+2022-05-12 Alan Modra <amodra@gmail.com>
+
+ cgen: increase buffer for hash_insn_list
+ As was done for hash_insn_array in commit d3d1cc7b13b4.
+
+ * cgen-dis.c (hash_insn_list): Increase size of buf. Assert
+ size is large enough.
+
+2022-05-12 Alan Modra <amodra@gmail.com>
+
+ PR29142, segv in ar with empty archive and libdeps specified
+ PR 29142
+ * ar.c (main): Properly handle libdeps for zero file_count.
+
+2022-05-12 Alan Modra <amodra@gmail.com>
+
+ Re: IBM zSystems: Accept (. - 0x100000000) PCRel32 operands
+ The new test failed on s390-linux due to bfd_sprintf_vma trimming
+ output to 32 bits for 32-bit targets. The test was faulty anyway,
+ expecting zero as the min end of the range is plainly wrong, but
+ that's what you get if you cast min to int.
+
+ * config/tc-s390.c (s390_insert_operand): Print range error using
+ PRId64.
+ * testsuite/gas/s390/zarch-z900-err.l: Correct expected output.
+
+2022-05-12 GDB Administrator <gdbadmin@sourceware.org>
+
+ Automatic date update in version.in
+
+2022-05-11 Tom de Vries <tdevries@suse.de>
+
+ [gdb/testsuite] Fix gdb.base/catch-syscall.exp with --with-expat=no
+ When doing a gdb build with --with-expat=no, I run into:
+ ...
+ (gdb) PASS: gdb.base/catch-syscall.exp: determine pipe syscall: \
+ continue to breakpoint: before pipe call
+ catch syscall pipe^M
+ Unknown syscall name 'pipe'.^M
+ (gdb) PASS: gdb.base/catch-syscall.exp: determine pipe syscall: \
+ catch syscall pipe
+ catch syscall pipe2^M
+ Unknown syscall name 'pipe2'.^M
+ (gdb) PASS: gdb.base/catch-syscall.exp: determine pipe syscall: \
+ catch syscall pipe2
+ continue^M
+ Continuing.^M
+ [Detaching after vfork from child process 18538]^M
+ [Inferior 1 (process 18537) exited normally]^M
+ (gdb) FAIL: gdb.base/catch-syscall.exp: determine pipe syscall: continue
+ ...
+
+ This is a regression since recent commit 5463a15c18b ("[gdb/testsuite] Handle
+ pipe2 syscall in gdb.base/catch-syscall.exp").
+
+ Fix this by using pipe/pipe2 syscall numbers instead.
+
+ Tested on x86_64-linux.
+
+2022-05-11 Nick Clifton <nickc@redhat.com>
+
+ nm: use -U as an alias for --defines-only, in line with llvm-nm
+
+2022-05-11 Tom de Vries <tdevries@suse.de>
+
+ [gdb/testsuite] Fix gdb.base/catch-syscall.exp without --enable-targets
+ When doing a gdb build without --enable-targets, I run into:
+ ...
+ (gdb) UNSUPPORTED: gdb.base/catch-syscall.exp: multiple targets: \
+ s390:31-bit vs s390:64-bit: set architecture s390:64-bit
+ delete breakpoints^M
+ (gdb) info breakpoints^M
+ No breakpoints or watchpoints.^M
+ (gdb) break -qualified main^M
+ No symbol table is loaded. Use the "file" command.^M
+ Make breakpoint pending on future shared library load? (y or [n]) n^M
+ (gdb) FAIL: gdb.base/catch-syscall.exp: gdb_breakpoint: set breakpoint at main
+ ...
+
+ The problem is that due to recent commit e21d8399303 ("[gdb/testsuite] Remove
+ target limits in gdb.base/catch-syscall.exp") "clean_restart $binfile" no
+ longer is called at the end of test_catch_syscall_multi_arch.
+
+ Fix this by moving "clean_restart $binfile" back to
+ test_catch_syscall_multi_arch.
+
+ Tested on x86_64-linux.
+
+2022-05-11 Tom de Vries <tdevries@suse.de>
+
+ [gdb/testsuite] Fix gdb.base/maint.exp on powerpc64le
+ On powerpc64le-linux, I ran into:
+ ...
+ FAIL: gdb.base/maint.exp: maint print objfiles: symtabs
+ ...
+
+ The problem is that:
+ - the "Cooked index in use" line occurs twice in the gdb output:
+ - once for exec maint, and
+ - once for "Object file system-supplied DSO".
+ - the matching of the second "Cooked index in use" also consumes
+ the "Symtabs:" string, and consequently the corresponding
+ clause does not trigger and $symtabs remains 0.
+
+ Fix this by limiting the output of the command to the exec.
+
+ Tested on x86_64-linux and powerpcle-linux.
+
+2022-05-11 Tom de Vries <tdevries@suse.de>
+
+ [gdb/tdep] Update syscalls/{ppc64,ppc}-linux.xml
+ Regenerate syscalls/{ppc64,ppc}-linux.xml on a system with 5.14 kernel.
+
+2022-05-11 Tom de Vries <tdevries@suse.de>
+
+ [gdb/testsuite] Remove target limits in gdb.base/catch-syscall.exp
+ In test-case gdb.base/catch-syscall.exp, proc test_catch_syscall_multi_arch we
+ test for supported targets using istarget, like so:
+ ...
+ if { [istarget "i*86-*-*"] || [istarget "x86_64-*-*"] } {
+ ...
+ } elseif { [istarget "powerpc-*-linux*"] \
+ || [istarget "powerpc64*-linux*"] } {
+ ...
+ ...
+ but the tests excercised there can all be executed if gdb is configured with
+ --enable-targets=all.
+
+ Rewrite the proc to iterate over all cases, and check if the test is supported
+ by trying "set arch $arch1" and "set arch $arch2".
+
+ Tested on x86_64-linux, with:
+ - a gdb build with --enable-targets=all, and
+ - a gdb build build with my usual --enable-targets setting (too long to
+ include here) which means the sparc vs sparc:v9 case is unsupported.
+
+2022-05-11 Tom de Vries <tdevries@suse.de>
+
+ [gdb/record] Handle statx system call
+ When running test-case gdb.reverse/fstatat-reverse.exp with target board
+ unix/-m32 on openSUSE Tumbleweed, I run into:
+ ...
+ (gdb) PASS: gdb.reverse/fstatat-reverse.exp: set breakpoint at marker2
+ continue^M
+ Continuing.^M
+ Process record and replay target doesn't support syscall number 383^M
+ Process record: failed to record execution log.^M
+ ^M
+ Program stopped.^M
+ 0xf7fc5555 in __kernel_vsyscall ()^M
+ (gdb) FAIL: gdb.reverse/fstatat-reverse.exp: continue to breakpoint: marker2
+ ...
+
+ The problems is that while with native we're trying to record these syscalls
+ (showing strace output):
+ ...
+ openat(AT_FDCWD, "/", O_RDONLY|O_PATH) = 3
+ newfstatat(3, ".", {st_mode=S_IFDIR|0755, st_size=146, ...}, 0) = 0
+ ...
+ with unix/-m32 we have instead:
+ ...
+ openat(AT_FDCWD, "/", O_RDONLY|O_PATH) = 3
+ statx(3, ".", AT_STATX_SYNC_AS_STAT|AT_NO_AUTOMOUNT, STATX_BASIC_STATS, \
+ {stx_mask=STATX_ALL|STATX_MNT_ID, stx_attributes=STATX_ATTR_MOUNT_ROOT, \
+ stx_mode=S_IFDIR|0755, stx_size=146, ...}) = 0
+ ...
+ and statx is not supported.
+
+ Fix this by adding support for recording syscall statx.
+
+ Tested on x86_64-linux.
+
+ Bug: https://sourceware.org/bugzilla/show_bug.cgi?id=28461
+
+2022-05-11 Alan Modra <amodra@gmail.com>
+
+ opcodes cgen: remove use of PTR
+ Note that opcodes is regenerated with cgen commit d1dd5fcc38e reverted,
+ due to failure of bpf to compile with that patch applied.
+
+ .../opcodes/bpf-opc.c:57:11: error: conversion from ‘long unsigned int’ to ‘unsigned int’ changes value from ‘18446744073709486335’ to ‘4294902015’ [-Werror=overflow]
+ 57 | 64, 64, 0xffffffffffff00ff, { { F (F_IMM32) }, { F (F_OFFSET16) }, { F (F_SRCLE) }, { F (F_OP_CODE) }, { F (F_DSTLE) }, { F (F_OP_SRC) }, { F (F_OP_CLASS) }, { 0 } }
+ plus other similar errors.
+
+ cpu/
+ * mep.opc (print_tpreg, print_spreg): Delete unnecessary
+ forward declarations. Replace PTR with void *.
+ * mt.opc (print_dollarhex, print_pcrel): Delete forward decls.
+ opcodes/
+ * bpf-desc.c, * bpf-dis.c, * cris-desc.c,
+ * epiphany-desc.c, * epiphany-dis.c,
+ * fr30-desc.c, * fr30-dis.c, * frv-desc.c, * frv-dis.c,
+ * ip2k-desc.c, * ip2k-dis.c, * iq2000-desc.c, * iq2000-dis.c,
+ * lm32-desc.c, * lm32-dis.c, * m32c-desc.c, * m32c-dis.c,
+ * m32r-desc.c, * m32r-dis.c, * mep-desc.c, * mep-dis.c,
+ * mt-desc.c, * mt-dis.c, * or1k-desc.c, * or1k-dis.c,
+ * xc16x-desc.c, * xc16x-dis.c,
+ * xstormy16-desc.c, * xstormy16-dis.c: Regenerate.
+
+2022-05-11 GDB Administrator <gdbadmin@sourceware.org>
+
+ Automatic date update in version.in
+
+2022-05-10 Youling Tang <tangyouling@loongson.cn>
+
+ gdb: mips: Fix large-frame.exp test case failure
+ $ objdump -d outputs/gdb.base/large-frame/large-frame-O2
+ 0000000120000b20 <func>:
+ 120000b20: 67bdbff0 daddiu sp,sp,-16400
+ 120000b24: ffbc4000 sd gp,16384(sp)
+ 120000b28: 3c1c0002 lui gp,0x2
+ 120000b2c: 679c8210 daddiu gp,gp,-32240
+ 120000b30: 0399e02d daddu gp,gp,t9
+ 120000b34: df998058 ld t9,-32680(gp)
+ 120000b38: ffbf4008 sd ra,16392(sp)
+ 120000b3c: 0411ffd8 bal 120000aa0 <blah>
+ ...
+
+ The disassembly of the above func function shows that we may use
+ instructions such as daddiu/daddu, so add "daddiu $gp,$gp,n",
+ "daddu $gp,$gp,$t9" and "daddu $gp,$t9,$gp" to the mips32_scan_prologue
+ function to fix the large-frame.exp test case.
+
+ Before applying the patch:
+
+ backtrace
+ #0 blah (a=0xfffffee220) at .../gdb/testsuite/gdb.base/large-frame-1.c:24
+ #1 0x0000000120000b44 in func ()
+ Backtrace stopped: frame did not save the PC
+ (gdb) FAIL: gdb.base/large-frame.exp: optimize=-O2: backtrace
+
+ # of expected passes 5
+ # of unexpected failures 1
+
+ After applying the patch:
+
+ # of expected passes 6
+
+2022-05-10 Tiezhu Yang <yangtiezhu@loongson.cn>
+
+ gdb: LoongArch: Use GDB style to check readbuf and writebuf
+ The GDB style is to write 'if (readbuf != nullptr)', and the same for
+ writebuf.
+
+2022-05-10 Tom Tromey <tromey@adacore.com>
+
+ Fix --disable-threading build
+ PR build/29110 points out that GDB fails to build on mingw when the
+ "win32" thread model is in use. It turns out that the Fedora cross
+ tools using the "posix" thread model, which somehow manages to support
+ std::future, whereas the win32 model does not.
+
+ While looking into this, I found that the configuring with
+ --disable-threading will also cause a build failure.
+
+ This patch fixes this build by introducing a compatibility wrapper for
+ std::future.
+
+ I am not able to test the win32 thread model build, but I'm going to
+ ask the reporter to try this patch.
+
+ Bug: https://sourceware.org/bugzilla/show_bug.cgi?id=29110
+
+2022-05-10 Pedro Alves <pedro@palves.net>
+
+ Fix "b f(std::string)" when current language is C
+ If you try to set a breakpoint at a function such as "b
+ f(std::string)", and the current language is C, the breakpoint fails
+ to be set, like so:
+
+ (gdb) set language c
+ break f(std::string)
+ Function "f(std::string)" not defined.
+ Make breakpoint pending on future shared library load? (y or [n]) n
+ (gdb)
+
+ The problem is that the code in GDB that expands the std::string
+ typedef hits this in c-typeprint.c:
+
+ /* If we have "typedef struct foo {. . .} bar;" do we want to
+ print it as "struct foo" or as "bar"? Pick the latter for
+ C++, because C++ folk tend to expect things like "class5
+ *foo" rather than "struct class5 *foo". We rather
+ arbitrarily choose to make language_minimal work in a C-like
+ way. */
+ if (language == language_c || language == language_minimal)
+ {
+ if (type->code () == TYPE_CODE_UNION)
+ gdb_printf (stream, "union ");
+ else if (type->code () == TYPE_CODE_STRUCT)
+ {
+ if (type->is_declared_class ())
+ gdb_printf (stream, "class ");
+ else
+ gdb_printf (stream, "struct ");
+ }
+ else if (type->code () == TYPE_CODE_ENUM)
+ gdb_printf (stream, "enum ");
+ }
+
+ I.e., std::string is expanded to "class std::..." instead of just
+ "std::...", and then the "f(class std::..." symbol doesn't exist.
+
+ Fix this by making cp-support.c:inspect_type print the expanded
+ typedef type using the language of the symbol whose type we're
+ expanding the typedefs for -- in the example in question, the
+ "std::string" typedef symbol, which is a C++ symbol.
+
+ Use type_print_raw_options as it seems to me that in this scenario we
+ always want raw types, to match the real symbol names.
+
+ Adjust the gdb.cp/break-f-std-string.exp testcase to try setting a
+ breakpoint at "f(std::string)" in both C and C++.
+
+ Change-Id: Ib54fab4cf0fd307bfd55bf1dd5056830096a653b
+
+2022-05-10 Pedro Alves <pedro@palves.net>
+
+ Always pass an explicit language down to c_type_print
+ The next patch will want to do language->print_type(type, ...), to
+ print a type in a given language, avoiding a dependency on the current
+ language. That doesn't work correctly currently, however, because
+ most language implementations of language_defn::print_type call
+ c_print_type without passing down the language. There are two
+ overloads of c_print_type, one that takes a language, and one that
+ does not. The one that does not uses the current language, defeating
+ the point of calling language->print_type()...
+
+ This commit removes the c_print_type overload that does not take a
+ language, and adjusts the codebase throughout to always pass down a
+ language. In most places, there's already an enum language handy.
+ language_defn::print_type implementations naturally pass down
+ this->la_language. In a couple spots, like in ada-typeprint.c and
+ rust-lang.c there's no enum language handy, but the code is written
+ for a specific language, so we just hardcode the language.
+
+ In gnuv3_print_method_ptr, I wasn't sure whether we could hardcode C++
+ here, and we don't have an enum language handy, so I made it use the
+ current language, just like today. Can always be improved later.
+
+ Change-Id: Ib54fab4cf0fd307bfd55bf1dd5056830096a653b
+
+2022-05-10 Pedro Alves <pedro@palves.net>
+
+ Fix "b f(std::string)", always use DMGL_VERBOSE
+ Currently, on any remotely modern GNU/Linux system,
+ gdb.cp/no-dmgl-verbose.exp fails like so:
+
+ break 'f(std::string)'
+ Function "f(std::string)" not defined.
+ (gdb) FAIL: gdb.cp/no-dmgl-verbose.exp: gdb_breakpoint: set breakpoint at 'f(std::string)'
+ break 'f(std::basic_string<char, std::char_traits<char>, std::allocator<char> >)'
+ Function "f(std::basic_string<char, std::char_traits<char>, std::allocator<char> >)" not defined.
+ (gdb) PASS: gdb.cp/no-dmgl-verbose.exp: DMGL_VERBOSE-demangled f(std::string) is not defined
+
+ This testcase was added back in 2011, here:
+
+ [patch] Remove DMGL_VERBOSE
+ https://sourceware.org/pipermail/gdb-patches/2011-June/083081.html
+
+ Back then, the testcase would pass cleanly. It turns out that the
+ reason it fails today is that the testcase is exercising something in
+ GDB that only makes sense if the program is built for the pre-C++11
+ libstc++ ABI. Back then the C++11 ABI didn't exist yet, but nowadays,
+ you need to compile with -D_GLIBCXX_USE_CXX11_ABI=0 to use the old
+ ABI. See "Dual ABI" in the libstdc++ manual, at
+ <https://gcc.gnu.org/onlinedocs/libstdc++/manual/using_dual_abi.html>.
+
+ If we tweak the gdb.cp/no-dmgl-verbose.exp testcase to force the old
+ ABI with -D_GLIBCXX_USE_CXX11_ABI=0, then it passes cleanly.
+
+ So why is it that setting a breakpoint at "f(std::string)" fails with
+ modern ABI, but passes with old ABI?
+
+ This is where libiberty demangler's DMGL_VERBOSE option comes in. The
+ Itanium ABI mangling scheme has a shorthand form for std::string (and
+ some other types). See
+ <https://itanium-cxx-abi.github.io/cxx-abi/abi.html>:
+
+ "In addition, the following catalog of abbreviations of the form "Sx" are used:
+
+ <substitution> ::= St # ::std::
+ <substitution> ::= Sa # ::std::allocator
+ <substitution> ::= Sb # ::std::basic_string
+ <substitution> ::= Ss # ::std::basic_string < char,
+ ::std::char_traits<char>,
+ ::std::allocator<char> >
+ <substitution> ::= Si # ::std::basic_istream<char, std::char_traits<char> >
+ <substitution> ::= So # ::std::basic_ostream<char, std::char_traits<char> >
+ <substitution> ::= Sd # ::std::basic_iostream<char, std::char_traits<char> >
+ "
+
+ When the libiberty demangler encounters such a abbreviation, by
+ default, it expands it to the user-friendly typedef "std::string",
+ "std::iostream", etc.. If OTOH DMGL_VERBOSE is specified, the
+ abbreviation is expanded to the underlying, non-typedefed fullname
+ "std::basic_string<char, std::char_traits<char>, std::allocator<char> >"
+ etc. as documented in the Itanium ABI, and pasted above. You can see
+ the standard abbreviations/substitutions in
+ libiberty/cp-demangle.c:standard_subs.
+
+ Back before Jan's patch in 2011, there were parts of GDB that used
+ DMGL_VERBOSE, and others that did not, leading to mismatches. The
+ solution back then was to stop using DMGL_VERBOSE throughout.
+
+ GDB has code in place to let users set a breakpoint at a function with
+ typedefs in its parameters, like "b f(uint32_t)". Demangled function
+ names as they appear in the symbol tables almost (more on this is in a
+ bit) never have typedefs in them, so when processing "b f(uint32_t)"
+ GDB first replaces "uint32_t" for its underlying type, and then sets a
+ breakpoint on the resulting prototype, in this case "f(unsigned int)".
+
+ Now, if DMGL_VERBOSE is _not_ used, then the demangler demangles the
+ mangled name of a function such as "void f(std::string)" that was
+ mangled using the standard abbreviations mentioned above really as:
+
+ "void f(std::string)".
+
+ For example, the mangled name of "void f(std::string)" if you compile
+ with old pre-C++11 ABI is "_Z1fSs". That uses the abbreviation "Ss",
+ so if you demangle that without DMGL_VERBOSE, you get:
+
+ $ echo "_Z1fSs" | c++filt --no-verbose
+ f(std::string)
+
+ while with DMGL_VERBOSE you'd get:
+
+ $ echo "_Z1fSs" | c++filt
+ f(std::basic_string<char, std::char_traits<char>, std::allocator<char> >)
+
+ If, when the user sets a breakpoint at "f(std::string)", GDB would
+ replace the std::string typedef for its underlying type using the same
+ mechanism I mentioned for the "f(uint32_t)" example above, then GDB
+ would really try to set a breakpoint at "f(std::basic_string<char,
+ std::char_traits<char>, std::allocator<char> >)", and that would fail,
+ as the function symbol GDB knows about for that function, given no
+ DMGL_VERBOSE, is "f(std::string)".
+
+ For this reason, the code that expands typedefs in function parameter
+ names has an exception for std::string (and other standard
+ abbreviation types), such that "std::string" is never
+ typedef-expanded.
+
+ And here lies the problem when you try to do "b f(std::string)" with a
+ program compiled with the C++11 ABI. In that case, std::string
+ expands to a different underlying type, like so:
+
+ f(std::__cxx11::basic_string<char, std::char_traits<char>, std::allocator<char> >)
+
+ and this symbol naturally mangles differently, as:
+
+ _Z1fNSt7__cxx1112basic_stringIcSt11char_traitsIcESaIcEEE
+
+ and then because this doesn't use the shorthand mangling abbreviation
+ for "std::string" anymore, it always demangles as:
+
+ f(std::__cxx11::basic_string<char, std::char_traits<char>, std::allocator<char> >)
+
+ Now, when using the C++11 ABI, and you set a breakpoint at
+ "f(std::string)", GDB's typedefs-in-parameters expansion code hits the
+ exception for "std::string" and doesn't expand it, so the breakpoint
+ fails to be inserted, because the symbol that exists is really the
+
+ f(std::__cxx11::basic_string<char, std::char_traits<char>, std::allocator<char> >)
+
+ one, not "f(std::string)".
+
+ So to fix things for C++11 ABI, clearly we need to remove the
+ "std::string" exception from the typedef-in-parameters expansion
+ logic. If we do just that, then "b f(std::string)" starts working
+ with the C++11 ABI.
+
+ However, if we do _just_ that, and nothing else, then we break
+ pre-C++11 ABI...
+
+ The solution is then to in addition switch GDB to always use
+ DMGL_VERBOSE. If we do this, then pre-C++11 ABI symbols works the
+ same as C++11 ABI symbols overall -- the demangler expands the
+ standard abbreviation for "std::string" as "std::basic_string<char,
+ std::char_traits<char>, std::allocator<char> >" and letting GDB expand
+ the "std::string" typedef (etc.) too is no longer a problem.
+
+ To avoid getting in the situation where some parts of GDB use
+ DMGL_VERBOSE and others not, this patch adds wrappers around the
+ demangler's entry points that GDB uses, and makes those force
+ DMGL_VERBOSE.
+
+ The point of the gdb.cp/no-dmgl-verbose.exp testcase was to try to
+ ensure that DMGL_VERBOSE doesn't creep back in:
+
+ gdb_test {break 'f(std::basic_string<char, std::char_traits<char>, std::allocator<char> >)'} \
+ {Function ".*" not defined\.} \
+ "DMGL_VERBOSE-demangled f(std::string) is not defined"
+
+ This obviously no longer makes sense to have, since we now depend on
+ DMGL_VERBOSE. So the patch replaces gdb.cp/no-dmgl-verbose.exp with a
+ new gdb.cp/break-f-std-string.exp testcase whose purpose is to make
+ sure that setting a breakpoint at "f(std::string)" works. It
+ exercises both pre-C++11 ABI and C++11 ABI.
+
+ Change-Id: Ib54fab4cf0fd307bfd55bf1dd5056830096a653b
+
+2022-05-10 Nils-Christian Kempke <nils-christian.kempke@intel.com>
+
+ gdb/testsuite: fix testsuite regressions for unix/-m32 board
+ This commit fixes two regressions introduced by
+ 891e4190ba705373eec7b374209478215fff5401.
+
+ Reason for the failures was, that on a 32 bit machine the maximum
+ array length as well as the maximum allocatable memory for arrays
+ (in bytes) both seem to be limited by the maximum value of a 4
+ byte (signed) Fortran integer. This lead to compiler errors/unexpected
+ behavior when compiling/running the test with the -m32 board. This
+ behavior is compiler dependent and can differ for different compiler
+ implementations, but generally, it seemed like a good idea to simply
+ avoid such situations.
+
+ The affected tests check for GDB's overflow behavior when using KIND
+ parameters with GDB implemented Fortran intrinsic functions. If these
+ KIND parameters are too small to fit the actual intrinsic function's
+ result, an overflow is expected. This was done for 1, 2, and 4
+ byte overflows. The last one caused problems, as it tried to allocate
+ arrays of length/byte-size bigger than the 4 byte signed integers which
+ would then be used with the LBOUND/UBOUND/SIZE intrinsics.
+
+ The tests were adapted to only execute the 4 byte overflow tests when
+ running on targets with 64 bit. For this, the compiled tests evaluate the
+ byte size of a C_NULL_PTR via C_SIZEOF, both defined in the ISO_C_BINDING
+ module. The ISO_C_BINDING constant C_NULL_PTR is a Fortran 2003, the
+ C_SIZEOF a Fortran 2008 extension. Both have been implemented in their
+ respective compilers for while (e.g. C_SIZEOF is available since
+ gfortran 4.6). If this byte size evaluates to less than 8 we skip the
+ 4 byte overflow tests in the compiled tests of size.f90 and
+ lbound-ubound.f90. Similarly, in the lbound-ubound.exp testsfile we skip
+ the 4 byte overflow tests if the procedure is_64_target evaluates to false.
+
+ In size.f90, additionally, the to-be-allocated amount of bytes did not
+ fit into 4 byte signed integers for some of the arrays, as it was
+ approximately 4 times the maximum size of a 4 byte signed integer. We
+ adapted the dimensions of the arrays in question as the meaningfulness
+ of the test does not suffer from this.
+
+ With this patch both test run fine with the unix/-m32 board and
+ gcc/gfortran (9.4) as well as the standard board file.
+
+ We also thought about completely removing the affected test from the
+ testsuite. We decided against this as the 32 bit identification comes
+ with Fortran 2008 and removing tests would have decreased coverage.
+
+ A last change that happened with this patch was due to gfortran's and
+ ifx's type resolution when assigning big constants to Fortran Integer*8
+ variables. Before the above changes this happened in a parameter
+ statement. Here, both compilers happily accepted a line like
+
+ integer*8, parameter :: var = 2147483647 + 5.
+
+ After this change the assignment is not done as a parameter
+ anymore, as this triggered compile time overflow errors. Instead,
+ the assignment is done dynamically, depending on the kind of machine one
+ is on. Sadly, just changing this line to
+
+ integer*8 :: var
+ var = 2147483647 + 5
+
+ does not work with ifx (or flang for that matter, they behave similarly
+ here). It will create an integer overflow in the addition as ifx deduces
+ the type the additon is done in as Integer*4. So var will actually
+ contain the value -2147483644 after this. The lines
+
+ integer*8 :: var
+ var = 2147483652
+
+ on the other hand fail to compile with gfortran (9.4.0) as the compiler
+ identifies an Integer overflow here. Finally, to make this work with
+ all three compilers an additional parameter has been introduced
+
+ integer*8, parameter :: helper = 2147483647
+ integer*8 :: var
+ var = helper + 5.
+
+ This works on all 3 compilers as expected.
+
+ Bug: https://sourceware.org/bugzilla/show_bug.cgi?id=29053
+ Bug: https://sourceware.org/bugzilla/show_bug.cgi?id=29054
+
+2022-05-10 Pedro Alves <pedro@palves.net>
+
+ Move non-dependent gdb::observers::observable::visit_state outside template
+ The other day, while looking at the symbols that end up in a GDB
+ index, I noticed that the gdb::observers::observable::visit_state enum
+ class appears a number of times:
+
+ $ grep VISIT gdb-index-symbol-names.txt
+ gdb::observers::observable<bpstat*, int>::visit_state::NOT_VISITED
+ gdb::observers::observable<bpstat*, int>::visit_state::VISITED
+ gdb::observers::observable<bpstat*, int>::visit_state::VISITING
+ gdb::observers::observable<breakpoint*>::visit_state::NOT_VISITED
+ gdb::observers::observable<breakpoint*>::visit_state::VISITED
+ gdb::observers::observable<breakpoint*>::visit_state::VISITING
+ gdb::observers::observable<char const*, char const*>::visit_state::NOT_VISITED
+ gdb::observers::observable<char const*, char const*>::visit_state::VISITED
+ gdb::observers::observable<char const*, char const*>::visit_state::VISITING
+ gdb::observers::observable<char const*>::visit_state::NOT_VISITED
+ gdb::observers::observable<char const*>::visit_state::VISITED
+ gdb::observers::observable<char const*>::visit_state::VISITING
+ gdb::observers::observable<enum_flags<user_selected_what_flag> >::visit_state::NOT_VISITED
+ gdb::observers::observable<enum_flags<user_selected_what_flag> >::visit_state::VISITED
+ gdb::observers::observable<enum_flags<user_selected_what_flag> >::visit_state::VISITING
+ gdb::observers::observable<frame_info*, int>::visit_state::NOT_VISITED
+ gdb::observers::observable<frame_info*, int>::visit_state::VISITED
+ gdb::observers::observable<frame_info*, int>::visit_state::VISITING
+ gdb::observers::observable<gdbarch*>::visit_state::NOT_VISITED
+ gdb::observers::observable<gdbarch*>::visit_state::VISITED
+ gdb::observers::observable<gdbarch*>::visit_state::VISITING
+ gdb::observers::observable<gdb_signal>::visit_state::NOT_VISITED
+ gdb::observers::observable<gdb_signal>::visit_state::VISITED
+ gdb::observers::observable<gdb_signal>::visit_state::VISITING
+ [... snip ...]
+
+ $ grep VISIT gdb-index-symbol-names.txt | wc -l
+ 72
+
+ enum class visit_state is defined inside the class template
+ observable, but it doesn't have to be, as it does not depend on the
+ template parameters. This commit moves it out, so that only one such
+ type exists. This reduces the size of a -O0 -g3 build for me by
+ around 0.6%, like so:
+
+ $ du -b gdb.before gdb.after
+ 164685280 gdb.before
+ 163707424 gdb.fixed
+
+ and codesize by some 0.5%.
+
+ Change-Id: I405f4ef27b8358fdd22158245b145d849b45658e
+
+2022-05-10 Nick Clifton <nickc@redhat.com>
+
+ Fix compiling binutils/resbin.c with Clang version 14
+
+2022-05-10 Vladimir Mezentsev <vladimir.mezentsev@oracle.com>
+
+ gprofng: include percentages in default metrics list
+ gprofng/ChangeLog
+ 2022-05-09 Vladimir Mezentsev <vladimir.mezentsev@oracle.com>
+
+ * src/gprofng.rc: Include percentages in default metrics list.
+
+2022-05-10 Alan Modra <amodra@gmail.com>
+
+ gprof: remove use of PTR
+ * basic_blocks.c: Replace uses of PTR with void * throughout.
+ * cg_arcs.c: Likewise.
+ * cg_print.c: Likewise.
+ * hist.c: Likewise.
+ * source.h: Likewise.
+ * symtab.c: Likewise.
+
+ gas: remove use of PTR
+ * config/obj-evax.c (evax_symbol_new_hook): Don't cast to PTR.
+
+2022-05-10 Alan Modra <amodra@gmail.com>
+
+ opcodes: remove use of PTR
+ The non-cgen parts of opcodes.
+
+ * cr16-dis.c (print_arg): Replace PTR with void *.
+ * crx-dis.c (print_arg): Likewise.
+ * rl78-dis.c (print_insn_rl78_common): Don't use PTR cast.
+ * rx-dis.c (print_insn_rx): Likewise.
+ * visium-dis.c (print_insn_visium): Likewise.
+ * z8k-dis.c (print_insn_z8k): Likewise.
+
+2022-05-10 Alan Modra <amodra@gmail.com>
+
+ bfd: remove use of PTR
+ * coffcode.h (coff_write_object_contents): Don't cast to PTR.
+ * elf32-csky.c (csky_elf_link_hash_traverse): Remove use of PTR
+ and PARAMS.
+ (csky_allocate_dynrelocs): Don't use PTR cast.
+ * elf32-nios2.c (adjust_dynrelocs, allocate_dynrelocs): Replace
+ PTR with void *.
+ * elf32-visium.c (visium_elf_howto_parity_reloc): Likewise.
+ * elfxx-ia64.c (ia64_elf_reloc): Likewise.
+ * plugin.c (bfd_plugin_bfd_print_private_bfd_data): Likewise.
+
+ include: remove use of PTR
+ * hashtab.h (HTAB_EMPTY_ENTRY): Replace PTR with void *.
+ (HTAB_DELETED_ENTRY): Likewise.
+
+2022-05-10 GDB Administrator <gdbadmin@sourceware.org>
+
+ Automatic date update in version.in
+
+2022-05-09 Ilya Leoshkevich <iii@linux.ibm.com>
+
+ IBM zSystems: Accept (. - 0x100000000) PCRel32 operands
+ as does not accept instructions like brasl %r0,.-0x100000000, because
+ of two problems with the generic overflow check:
+
+ 1. PCRel32 operands are signed, but are treated as unsigned.
+
+ 2. The allowed range for these operands is [-(1 << 32), (1 << 32) - 1],
+ and not [-(1 << 31), (1 << 31) - 1].
+
+ Fix both by disabling the generic overflow check - it's not needed,
+ because s390_insert_operand () performs its own.
+
+ gas/
+
+ * config/tc-s390.c (md_gather_operands): Set fx_no_overflow.
+ * testsuite/gas/s390/s390.exp: Add zarch-z900-err.
+ * testsuite/gas/s390/esa-z900.d: New test.
+ * testsuite/gas/s390/esa-z900.s: New test.
+ * testsuite/gas/s390/zarch-z900-err.l: New test.
+ * testsuite/gas/s390/zarch-z900-err.s: New test.
+
+2022-05-09 Andrew Burgess <aburgess@redhat.com>
+
+ gdb/testsuite: fix occasional failure in gdb.mi/mi-multi-commands.exp
+ In bug PR gdb/29036, another failure was reported for the test
+ gdb.mi/mi-multi-commands.exp. This test sends two commands to GDB as
+ a single write, and then checks that both commands are executed.
+
+ The problem that was encountered here is that the output of the first
+ command, which looks like this:
+
+ ^done,value="\"FIRST COMMAND\""
+
+ Is actually produced in parts, first the '^done' is printed, then the
+ ',value="\"FIRST COMMAND\"" is printed.
+
+ What was happening is that some characters from the second command
+ were being echoed after the '^done' had been printed, but before the
+ value part had been printed. To avoid this issue I've relaxed the
+ pattern that checks for the first command a little. With this fix in
+ place the occasional failure in this test is no longer showing up.
+
+ Bug: https://sourceware.org/bugzilla/show_bug.cgi?id=29036
+
+2022-05-09 Tom de Vries <tdevries@suse.de>
+
+ [gdb] Update syscalls/{amd64,i386}-linux.xml
+ - Add a script syscalls/gen-header.py, based on syscalls/arm-linux.py.
+ - Add a script syscalls/update-linux.sh (alongside update-freebsd.sh and
+ update-netbsd.sh).
+ - Use syscalls/update-linux.sh to update syscalls/{amd64,i386}-linux.xml.in.
+ - Regenerate syscalls/{amd64,i386}-linux.xml using syscalls/Makefile.
+
+ In gdb/syscalls/i386-linux.xml.in, updating has the following notable effect:
+ ...
+ - <syscall name="madvise1" number="220"/>
+ - <syscall name="getdents64" number="221"/>
+ - <syscall name="fcntl64" number="222"/>
+ + <syscall name="getdents64" number="220"/>
+ + <syscall name="fcntl64" number="221"/>
+ ...
+
+ I've verified in ./arch/x86/entry/syscalls/syscall_32.tbl that the numbers are
+ correct.
+
+ Tested on x86_64-linux.
+
+2022-05-09 Tom de Vries <tdevries@suse.de>
+
+ [gdb] Add gdb/syscalls/Makefile
+ Add a Makefile in gdb/syscalls that can be used to translate
+ gdb/syscalls/*.xml.in into gdb/syscalls/*.xml.
+
+ Calling make reveals that bfin-linux.xml is missing, so add it.
+
+ Tested on x86_64-linux.
+
+2022-05-09 Tiezhu Yang <yangtiezhu@loongson.cn>
+
+ gdb: LoongArch: Implement the return_value gdbarch method
+ When execute the following command on LoongArch:
+
+ make check-gdb TESTS="gdb.base/async.exp"
+
+ there exist the following failed testcases:
+
+ FAIL: gdb.base/async.exp: finish& (timeout)
+ FAIL: gdb.base/async.exp: jump& (timeout)
+ FAIL: gdb.base/async.exp: until& (timeout)
+ FAIL: gdb.base/async.exp: set exec-done-display off (GDB internal error)
+
+ we can see the following messages in gdb/testsuite/gdb.log:
+
+ finish&
+ Run till exit from #0 foo () at /home/loongson/gdb.git/gdb/testsuite/gdb.base/async.c:9
+ (gdb) /home/loongson/gdb.git/gdb/gdbarch.c:2646: internal-error: gdbarch_return_value: Assertion `gdbarch->return_value != NULL' failed.
+ A problem internal to GDB has been detected,
+ further debugging may prove unreliable.
+
+ In order to fix the above failed testcases, implement the return_value
+ gdbarch method on LoongArch.
+
+2022-05-09 Andrew Burgess <aburgess@redhat.com>
+
+ gdb: fix for gdb.base/eof-exit.exp test failures
+ This fix relates to PR gdb/29032, this makes the test more stable by
+ ensuring that the Ctrl-D is only sent once the prompt has been
+ displayed. This issue was also discussed on the mailing list here:
+
+ https://sourceware.org/pipermail/gdb-patches/2022-April/187670.html
+
+ The problem identified in the bug report is that sometimes the Ctrl-D
+ (that the test sends to GDB) arrives while GDB is processing a
+ command. When this happens the Ctrl-D is handled differently than if
+ the Ctrl-D is sent while GDB is waiting for input at a prompt.
+
+ The original intent of the test was that the Ctrl-D be sent while GDB
+ was waiting at a prompt, and that is the case the occurs most often,
+ but, when the Ctrl-D arrives during command processing, then GDB will
+ ignore the Ctrl-D, and the test will fail.
+
+ This commit ensures the Ctrl-D is always sent while GDB is waiting at
+ a prompt, which makes this test stable.
+
+ But, that still leaves an open question, what should happen when the
+ Ctrl-D arrives while GDB is processing a command? This commit doesn't
+ attempt to answer that question, which is while bug PR gdb/29032 will
+ not be closed once this commit is merged.
+
+ Bug: https://sourceware.org/bugzilla/show_bug.cgi?id=29032
+
+2022-05-09 Tom de Vries <tdevries@suse.de>
+
+ [gdb] Make btrace maintainer entry more clear
+ Do:
+ ...
+ -record btrace <name> <email>
+ +record
+ + btrace <name> <email>
+ ...
+ to clarify that the listed maintainer is only maintainer of the btrace part of
+ record.
+
+2022-05-09 Martin Liska <mliska@suse.cz>
+
+ ansidecl.h: sync from GCC
+ include/ChangeLog:
+
+ * ansidecl.h: Sync from GCC.
+
+2022-05-09 Tom de Vries <tdevries@suse.de>
+
+ [gdb/tdep] Support catch syscall pipe2 for i386
+ With test-case gdb.base/catch-syscall.exp and target board unix/-m32, we run
+ into:
+ ...
+ (gdb) catch syscall pipe2^M
+ Unknown syscall name 'pipe2'.^M
+ (gdb) FAIL: gdb.base/catch-syscall.exp: determine pipe syscall: catch syscall pipe2
+ ...
+
+ Fix this by:
+ - adding a pipe2 entry in gdb/syscalls/i386-linux.xml.in, and
+ - regenerating gdb/syscalls/i386-linux.xml using
+ "xsltproc --output i386-linux.xml apply-defaults.xsl i386-linux.xml.in".
+
+ Tested on x86_64-linux with native and unix/-m32.
+
+ Bug: https://sourceware.org/bugzilla/show_bug.cgi?id=29056
+
+2022-05-09 Tom de Vries <tdevries@suse.de>
+
+ [gdb/testsuite] Handle pipe2 syscall in gdb.base/catch-syscall.exp
+ When running test-case gdb.reverse/pipe-reverse.exp on openSUSE Tumbleweed,
+ I run into:
+ ...
+ (gdb) continue^M
+ Continuing.^M
+ ^M
+ Catchpoint 2 (returned from syscall pipe2), in pipe () from /lib64/libc.so.6^M
+ (gdb) FAIL: gdb.base/catch-syscall.exp: without arguments: \
+ syscall pipe has returned
+ ...
+
+ The current glibc on Tumbleweed is 2.35, which contains commit
+ "linux: Implement pipe in terms of __NR_pipe2", and consequently syscall pipe2
+ is used instead of syscall pipe.
+
+ Fix this by detecting whether syscall pipe or pipe2 is used before running the
+ tests.
+
+ Tested on x86_64-linux, specifically on:
+ - openSUSE Tumbleweed (with glibc 2.35), and
+ - openSUSE Leap 15.3 (with glibc 2.31).
+
+ On openSUSE Tumbleweed + target board unix/-m32, this exposes:
+ ...
+ (gdb) catch syscall pipe2^M
+ Unknown syscall name 'pipe2'.^M
+ ...
+ which will be fixed in a folllow-up patch.
+
+ Bug: https://sourceware.org/bugzilla/show_bug.cgi?id=29056
+
+2022-05-09 Tom de Vries <tdevries@suse.de>
+
+ [gdb/tdep] Handle pipe2 syscall for amd64
+ When running test-case gdb.reverse/pipe-reverse.exp on openSUSE Tumbleweed,
+ I run into:
+ ...
+ (gdb) continue^M
+ Continuing.^M
+ Process record and replay target doesn't support syscall number 293^M
+ Process record: failed to record execution log.^M
+ ^M
+ Program stopped.^M
+ 0x00007ffff7daabdb in pipe () from /lib64/libc.so.6^M
+ (gdb) FAIL: gdb.reverse/pipe-reverse.exp: continue to breakpoint: marker2
+ ...
+
+ The current glibc on Tumbleweed is 2.35, which contains commit
+ "linux: Implement pipe in terms of __NR_pipe2", and consequently syscall pipe2
+ is used in stead of syscall pipe.
+
+ There is already support added for syscall pipe2 for aarch64 (which only has
+ syscall pipe2, not syscall pipe), so enable the same for amd64, by:
+ - adding amd64_sys_pipe2 in enum amd64_syscall
+ - translating amd64_sys_pipe2 to gdb_sys_pipe2 in amd64_canonicalize_syscall
+
+ Tested on x86_64-linux, specifically on:
+ - openSUSE Tumbleweed (with glibc 2.35), and
+ - openSUSE Leap 15.3 (with glibc 2.31).
+
+ Bug: https://sourceware.org/bugzilla/show_bug.cgi?id=29056
+
+2022-05-09 GDB Administrator <gdbadmin@sourceware.org>
+
+ Automatic date update in version.in
+
+2022-05-08 Tom de Vries <tdevries@suse.de>
+
+ [gdb/testsuite] Fix gdb.tui/scroll.exp with read1
+ When running test-case gdb.tui/scroll.exp, I get:
+ ...
+ Box Dump (80 x 8) @ (0, 0):
+ 0 $17 = 16
+ 1 (gdb) p 17
+ 2 $18 = 17
+ 3 (gdb) p 18
+ 4 $19 = 18
+ 5 (gdb) p 19
+ 6 $20 = 19
+ 7 (gdb)
+ PASS: gdb.tui/scroll.exp: check cmd window in flip layout
+ ...
+ but with check-read1 I get instead:
+ ...
+ Box Dump (80 x 8) @ (0, 0):
+ 0 (gdb) 15
+ 1 (gdb) p 16
+ 2 $17 = 16
+ 3 (gdb) p 17
+ 4 $18 = 17
+ 5 (gdb) p 18
+ 6 $19 = 18
+ 7 (gdb) p 19
+ FAIL: gdb.tui/scroll.exp: check cmd window in flip layout
+ ...
+
+ The "p 19" command is handled by Term::command, which sends the command and then
+ does Term::wait_for "^$gdb_prompt [string_to_regexp $cmd]", which:
+ - matches the line with "(gdb) p 19", and
+ - tries to match the following prompt "(gdb) "
+
+ The problem is that scrolling results in reissuing output before the "(gdb) p
+ 19", and the second matching triggers on that. Consequently, wait_for no
+ longer translates gdb output into screen actions, and the screen does not
+ reflect the result of "p 19".
+
+ Fix this by using a new proc wait_for_region_contents, which in contrast to
+ wait_for can handle a multi-line regexp.
+
+ Tested on x86_64-linux with make targets check and check-read1.
+
+2022-05-08 Tom de Vries <tdevries@suse.de>
+
+ [gdb/testsuite] Fix gdb.cp/casts.exp with -m32
+ When running test-case gdb.cp/casts.exp with target board unix/-m32, I run
+ into:
+ ...
+ (gdb) print (unsigned long long) &gd == gd_value^M
+ $31 = false^M
+ (gdb) FAIL: gdb.cp/casts.exp: print (unsigned long long) &gd == gd_value
+ ...
+
+ With some additional printing, we can see in more detail why the comparison
+ fails:
+ ...
+ (gdb) print /x &gd^M
+ $31 = 0xffffc5c8^M
+ (gdb) PASS: gdb.cp/casts.exp: print /x &gd
+ print /x (unsigned long long)&gd^M
+ $32 = 0xffffc5c8^M
+ (gdb) PASS: gdb.cp/casts.exp: print /x (unsigned long long)&gd
+ print /x gd_value^M
+ $33 = 0xffffffffffffc5c8^M
+ (gdb) PASS: gdb.cp/casts.exp: print /x gd_value
+ print (unsigned long long) &gd == gd_value^M
+ $34 = false^M
+ (gdb) FAIL: gdb.cp/casts.exp: print (unsigned long long) &gd == gd_value
+ ...
+
+ The gd_value is set by this assignment:
+ ...
+ unsigned long long gd_value = (unsigned long long) &gd;
+ ...
+
+ The problem here is directly casting from a pointer to a non-pointer-sized
+ integer.
+
+ Fix this by adding an intermediate cast to std::uintptr_t.
+
+ Tested on x86_64-linux with native and target board unix/-m32.
+
+2022-05-08 Tom de Vries <tdevries@suse.de>
+
+ [gdb/testsuite] Handle init errors in gdb.mi/user-selected-context-sync.exp
+ In OBS, on aarch64-linux, with a gdb 11.1 based package, I run into:
+ ...
+ (gdb) builtin_spawn -pty^M
+ new-ui mi /dev/pts/5^M
+ New UI allocated^M
+ (gdb) =thread-group-added,id="i1"^M
+ (gdb) ERROR: MI channel failed
+ warning: Error detected on fd 11^M
+ thread 1.1^M
+ Unknown thread 1.1.^M
+ (gdb) UNRESOLVED: gdb.mi/user-selected-context-sync.exp: mode=non-stop: \
+ test_cli_inferior: reset selection to thread 1.1
+ ...
+ with many more UNRESOLVED following.
+
+ The ERROR is a common problem, filed as
+ https://sourceware.org/bugzilla/show_bug.cgi?id=28561 .
+
+ But the many UNRESOLVEDs are due to not checking whether the setup as done in
+ the test_setup function succeeds or not.
+
+ Fix this by:
+ - making test_setup return an error upon failure
+ - handling test_setup error at the call site
+ - adding a "setup done" pass/fail to be turned into an unresolved
+ in case of error during setup.
+
+ Tested on x86_64-linux, by manually triggering the error in
+ mi_gdb_start_separate_mi_tty.
+
+2022-05-08 Tom de Vries <tdevries@suse.de>
+
+ [gdb/testsuite] Fix gdb.ada/catch_ex_std.exp with remote-gdbserver-on-localhost
+ When running test-case gdb.ada/catch_ex_std.exp on target board
+ remote-gdbserver-on-localhost, I run into:
+ ...
+ (gdb) continue^M
+ Continuing.^M
+ [Inferior 1 (process 15656) exited with code 0177]^M
+ (gdb) FAIL: gdb.ada/catch_ex_std.exp: runto: run to main
+ Remote debugging from host ::1, port 49780^M
+ /home/vries/foo: error while loading shared libraries: libsome_package.so: \
+ cannot open shared object file: No such file or directory^M
+ ...
+
+ Fix this by adding the usual shared-library + remote-target helper
+ "gdb_load_shlib $sofile".
+
+ Tested on x86_64-linux with native and target board
+ remote-gdbserver-on-localhost.
+
+2022-05-08 Tom de Vries <tdevries@suse.de>
+
+ [gdb/testsuite] Fix gdb.threads/fork-plus-threads.exp with check-readmore
+ When running test-case gdb.threads/fork-plus-threads.exp with check-readmore,
+ I run into:
+ ...
+ [Inferior 11 (process 7029) exited normally]^M
+ [Inferior 1 (process 6956) exited normally]^M
+ FAIL: gdb.threads/fork-plus-threads.exp: detach-on-fork=off: \
+ inferior 1 exited (timeout)
+ ...
+
+ The problem is that the regexp consuming the "Inferior exited normally"
+ messages:
+ - consumes more than one of those messages at a time, but
+ - counts only one of those messages.
+
+ Fix this by adopting a line-by-line approach, which deals with those messages
+ one at a time.
+
+ Tested on x86_64-linux with native, check-read1 and check-readmore.
+
+2022-05-08 GDB Administrator <gdbadmin@sourceware.org>
+
+ Automatic date update in version.in
+
+2022-05-07 Tom Tromey <tom@tromey.com>
+
+ Fix "catch syscall"
+ Simon pointed out that some recent patches of mine broke "catch
+ syscall". Apparently I forgot to finish the conversion of this code
+ when removing init_catchpoint. This patch completes the conversion
+ and fixes the bug.
+
+2022-05-07 Andrew Burgess <aburgess@redhat.com>
+
+ gdb/readline: fix extra 'quit' message problem
+ After these two commits:
+
+ commit 4fb7bc4b147fd30b781ea2dad533956d0362295a
+ Date: Mon Mar 7 13:49:21 2022 +0000
+
+ readline: back-port changes needed to properly detect EOF
+
+ commit 91395d97d905c31ac38513e4aaedecb3b25e818f
+ Date: Tue Feb 15 17:28:03 2022 +0000
+
+ gdb: handle bracketed-paste-mode and EOF correctly
+
+ It was observed that, if a previous command is selected at the
+ readline prompt using the up arrow key, then when the command is
+ accepted (by pressing return) an unexpected 'quit' message will be
+ printed by GDB. Here's an example session:
+
+ (gdb) p 123
+ $1 = 123
+ (gdb) p 123
+ quit
+ $2 = 123
+ (gdb)
+
+ In this session the second 'p 123' was entered not by typing 'p 123',
+ but by pressing the up arrow key to select the previous command. It
+ is important that the up arrow key is used, typing Ctrl-p will not
+ trigger the bug.
+
+ The problem here appears to be readline's EOF detection when handling
+ multi-character input sequences. I have raised this issue on the
+ readline mailing list here:
+
+ https://lists.gnu.org/archive/html/bug-readline/2022-04/msg00012.html
+
+ a solution has been proposed here:
+
+ https://lists.gnu.org/archive/html/bug-readline/2022-04/msg00016.html
+
+ This patch includes a test for this issue as well as a back-port of
+ (the important bits of) readline commit:
+
+ commit 2ef9cec8c48ab1ae3a16b1874a49bd1f58eaaca1
+ Date: Wed May 4 11:18:04 2022 -0400
+
+ fix for setting RL_STATE_EOF in callback mode
+
+ That commit also includes some updates to the readline documentation
+ and tests that I have not included in this commit.
+
+ With this commit in place the unexpected 'quit' messages are resolved.
+
+2022-05-07 Alan Modra <amodra@gmail.com>
+
+ Fix multiple ubsan warnings in i386-dis.c
+ Commit 39fb369834a3 "opcodes: Make i386-dis.c thread-safe" introduced
+ a number of casts to bfd_signed_vma that cause undefined behaviour
+ with a 32-bit libbfd. Revert those changes.
+
+ * i386-dis.c (OP_E_memory): Do not cast disp to bfd_signed_vma
+ for negation.
+ (get32, get32s): Don't use bfd_signed_vma here.
+
+2022-05-07 Alan Modra <amodra@gmail.com>
+
+ Re: Fix new linker testsuite failures due to rwx segment test problems
+ Fix it some more.
+
+ bfd/
+ * elfnn-loongarch.c: Remove commented out elf_backend_* defines.
+ ld/
+ * testsuite/ld-elf/elf.exp (target_defaults_to_execstack): Match
+ arm*. Delete loongarch.
+
+2022-05-07 GDB Administrator <gdbadmin@sourceware.org>
+
+ Automatic date update in version.in
+
+2022-05-07 Carl Love <cel@us.ibm.com>
+
+ PowerPC fix for gdb.server/sysroot.exp
+ On PowerPC, the stop in the printf function is of the form:
+
+ Breakpoint 2, 0x00007ffff7c6ab08 in printf@@GLIBC_2.17 () from /lib64/libc.so.6
+
+ On other architectures the output looks like:
+
+ Breakpoint 2, 0x0000007fb7ea29ac in printf () from /lib/aarch64-linux-gnu/libc.so.6
+
+ The following patch modifies the printf test by matchine any character
+ starting immediately after the printf. The test now works for PowerPC
+ output as well as the output from other architectures.
+
+ The test has been run on a Power 10 system and and Intel x86_64 system.
+
+2022-05-06 Nick Clifton <nickc@redhat.com>
+
+ Fix new linker testsuite failures due to rwx segment test problems
+
+2022-05-06 Tom Tromey <tom@tromey.com>
+
+ Introduce catchpoint class
+ This introduces a catchpoint class that is used as the base class for
+ all catchpoints. init_catchpoint is rewritten to be a constructor
+ instead.
+
+ This changes the hierarchy a little -- some catchpoints now inherit
+ from base_breakpoint whereas previously they did not. This isn't a
+ problem, as long as re_set is redefined in catchpoint.
+
+2022-05-06 Tom Tromey <tom@tromey.com>
+
+ Add initializers to tracepoint
+ This adds some initializers to tracepoint. I think right now these
+ may not be needed, due to obscure rules about zero initialization.
+ However, this will change in the next patch, and anyway it is clearer
+ to be explicit.
+
+ Remove init_raw_breakpoint_without_location
+ This removes init_raw_breakpoint_without_location, replacing it with a
+ constructor on 'breakpoint' itself. The subclasses and callers are
+ all updated.
+
+ Disable copying for breakpoint
+ It seems to me that breakpoint should use DISABLE_COPY_AND_ASSIGN.
+ This patch does this.
+
+ Add constructor to exception_catchpoint
+ This adds a constructor to exception_catchpoint and simplifies the
+ caller.
+
+ Add constructor to syscall_catchpoint
+ This adds a constructor to syscall_catchpoint and simplifies the
+ caller.
+
+ Add constructor to signal_catchpoint
+ This adds a constructor to signal_catchpoint and simplifies the
+ caller.
+
+ Add constructor to solib_catchpoint
+ This adds a constructor to solib_catchpoint and simplifies the caller.
+
+ Add constructor to fork_catchpoint
+ This adds a constructor to fork_catchpoint and simplifies the caller.
+
+ Remove unnecessary line from catch_exec_command_1
+ catch_exec_command_1 clears the new catchpoint's "exec_pathname"
+ field, but this is already done by virtue of calling "new".
+
+ Constify breakpoint::print_recreate
+ This constifies breakpoint::print_recreate.
+
+ Constify breakpoint::print_mention
+ This constifies breakpoint::print_mention.
+
+ Constify breakpoint::print_one
+ This constifies breakpoint::print_one.
+
+ Constify breakpoint::print_it
+ This constifies breakpoint::print_it. Doing this pointed out some
+ code in ada-lang.c that can be simplified a little as well.
+
+ Move works_in_software_mode to watchpoint
+ works_in_software_mode is only useful for watchpoints. This patch
+ moves it from breakpoint to watchpoint, and changes it to return bool.
+
+ Boolify breakpoint::explains_signal
+ This changes breakpoint::explains_signal to return bool.
+
+ Remove breakpoint::ops
+ The breakpoint::ops field is set but never used. This removes it.
+
+ Change print_recreate_thread to a method
+ This changes print_recreate_thread to be a method on breakpoint. This
+ function is only used as a helper by print_recreate methods, so I
+ thought this transformation made sense.
+
+2022-05-06 Carl Love <cel@us.ibm.com>
+
+ PowerPC: bp-permanent.exp, kill-after-signal fix
+ The break point after the stepi on Intel is the entry point of the user
+ signal handler function test_signal_handler. The code at the break point
+ looks like:
+
+ 0x<hex address> <test_signal_handler>: endbr64
+
+ On PowerPC with a Linux 5.9 kernel or latter, the address where gdb stops
+ after the stepi is in the vdso code inserted by the kernel. The code at the
+ breakpoint looks like:
+
+ 0x<hex address> <__kernel_start_sigtramp_rt64>: bctrl
+
+ This is different from other architectures. As discussed below, recent
+ kernel changes involving the vdso for PowerPC have been made changes to the
+ signal handler code flow. PowerPC is now stopping in function
+ __kernel_start_sigtramp_rt64. PowerPC now requires an additional stepi to
+ reach the user signal handler unlike other architectures.
+
+ The bp-permanent.exp and kill-after-signal tests run fine on PowerPC with an
+ kernel that is older than Linux 5.9.
+
+ The PowerPC 64 signal handler was updated by the Linux kernel 5.9-rc1:
+
+ commit id: 0138ba5783ae0dcc799ad401a1e8ac8333790df9
+ powerpc/64/signal: Balance return predictor stack in signal trampoline
+
+ An additional change to the PowerPC 64 signal handler was made in Linux
+ kernel version 5.11-rc7 :
+
+ commit id: 24321ac668e452a4942598533d267805f291fdc9
+ powerpc/64/signal: Fix regression in __kernel_sigtramp_rt64() semantics
+
+ The first kernel change, puts code into the user space signal handler (in
+ the vdso) as a performance optimization to prevent the call/return stack
+ from getting out of balance. The patch ensures that the entire
+ user/kernel/vdso cycle is balanced with the addition of the "brctl"
+ instruction.
+
+ The second patch, fixes the semantics of __kernel_sigtramp_rt64(). A new
+ symbol is introduced to serve as the jump target from the kernel to the
+ trampoline which now consists of two parts.
+
+ The above changes for PowerPC signal handler, causes gdb to stop in the
+ kernel code not the user signal handler as expected. The kernel dispatches
+ to the vdso code which in turn calls into the signal handler. PowerPC is
+ special in that the kernel is using a vdso instruction (bctrl) to enter the
+ signal handler.
+
+ I do not have access to a system with the first patch but not the second. I did
+ test on Power 9 with the Linux 5.15.0-27-generic kernel. Both tests fail on
+ this Power 9 system. The two tests also fail on Power 10 with the Linux
+ 5.14.0-70.9.1.el9_0.ppc64le kernel.
+
+ The following patch fixes the issue by checking if gdb stopped at "signal
+ handler called". If gdb stopped there, the tests verifies gdb is in the kernel
+ function __kernel_start_sigtramp_rt64 then does an additional stepi to reach the
+ user signal handler. With the patch below, the tests run without errors on both
+ the Power 9 and Power 10 systems with out any failures.
+
+2022-05-06 Alan Modra <amodra@gmail.com>
+
+ bfd targmatch.h makefile rule
+ I hit this just now with a make -j build after touching config.bfd.
+ mv: cannot stat 'targmatch.new': No such file or directory
+ make[2]: *** [Makefile:2336: targmatch.h] Error 1
+ make[2]: *** Waiting for unfinished jobs....
+
+ Fix that by not removing the target of the rule, a practice that seems
+ likely to cause parallel running of the rule recipe. The bug goes
+ back to 1997, the initial c0734708814c commit.
+
+ * Makefile.am (targmatch.h): rm the temp file, not targmatch.h.
+ * Makefile.in: Regenerate.
+
+2022-05-06 Tom de Vries <tdevries@suse.de>
+
+ [gdb/testsuite] Fix gdb.dwarf2/locexpr-data-member-location.exp with nopie
+ When running test-case gdb.dwarf2/locexpr-data-member-location.exp with
+ target board unix/-fno-PIE/-no-pie/-m32 I run into:
+ ...
+ (gdb) step^M
+ 26 return 0;^M
+ (gdb) FAIL: gdb.dwarf2/locexpr-data-member-location.exp: step into foo
+ ...
+
+ The problem is that the test-case tries to mimic some gdb_compile_shlib
+ behaviour using:
+ ...
+ set flags {additional_flags=-fpic debug}
+ get_func_info foo $flags
+ ...
+ but this doesn't work with the target board setting, because we end up doing:
+ ...
+ gcc locexpr-data-member-location-lib.c -fpic -g -lm -fno-PIE -no-pie -m32 \
+ -o func_addr23029.x
+ ...
+ while gdb_compile_shlib properly filters out the -fno-PIE -no-pie.
+
+ Consequently, the address for foo determined by get_func_info doesn't match
+ the actual address of foo.
+
+ Fix this by printing the address of foo using the result of gdb_compile_shlib.
+
+2022-05-06 GDB Administrator <gdbadmin@sourceware.org>
+
+ Automatic date update in version.in
+
+2022-05-05 Simon Marchi <simon.marchi@polymtl.ca>
+
+ gdb: use gdb::function_view for gdbarch_iterate_over_objfiles_in_search_order callback
+ A rather straightforward patch to change an instance of callback +
+ void pointer to gdb::function_view, allowing pasing lambdas that
+ capture, and eliminating the need for the untyped pointer.
+
+ Change-Id: I73ed644e7849945265a2c763f79f5456695b0037
+
+2022-05-05 Vladimir Mezentsev <vladimir.mezentsev@oracle.com>
+
+ gprofng: use $host instead $target
+ By mistake, $target was used instead of $host to configure the gprogng build.
+
+ gprofng/ChangeLog
+ 2022-04-28 Vladimir Mezentsev <vladimir.mezentsev@oracle.com>
+
+ PR gprofng/29113
+ PR gprofng/29116
+ * configure.ac: Use $host instead $target.
+ * libcollector/configure.ac: Likewise.
+ * configure: Rebuild.
+ * libcollector/configure: Rebuild.
+
+2022-05-05 Simon Marchi <simon.marchi@efficios.com>
+
+ gdb: make regcache's cooked_write_test selftest work with native-extended-gdbserver board
+ Running
+
+ $ make check TESTS="gdb.gdb/unittest.exp" RUNTESTFLAGS="--target_board=native-extended-gdbserver"
+
+ I get some failures:
+
+ Running selftest regcache::cooked_write_test::i386.^M
+ Self test failed: target already pushed^M
+ Running selftest regcache::cooked_write_test::i386:intel.^M
+ Self test failed: target already pushed^M
+ Running selftest regcache::cooked_write_test::i386:x64-32.^M
+ Self test failed: target already pushed^M
+ Running selftest regcache::cooked_write_test::i386:x64-32:intel.^M
+ Self test failed: target already pushed^M
+ Running selftest regcache::cooked_write_test::i386:x86-64.^M
+ Self test failed: target already pushed^M
+ Running selftest regcache::cooked_write_test::i386:x86-64:intel.^M
+ Self test failed: target already pushed^M
+ Running selftest regcache::cooked_write_test::i8086.^M
+ Self test failed: target already pushed^M
+
+ This is because the native-extended-gdbserver automatically connects GDB
+ to a GDBserver on startup, and therefore pushes a remote target on the
+ initial inferior. cooked_write_test is currently written in a way that
+ errors out if the current inferior has a process_stratum_target pushed.
+
+ Rewrite it to use scoped_mock_context, so it doesn't depend on the
+ current inferior (the current one upon entering the function).
+
+ Change-Id: I0357f989eacbdecc4bf88b043754451b476052ad
+
+2022-05-05 Luis Machado <luis.machado@arm.com>
+
+ Move TILE-Gx files to TARGET64_LIBOPCODES_CFILES
+ TILE-Gx is a 64-bit core, so we should include those files in the
+ TARGET64_LIBOPCODES_CFILES as opposed to TARGET32_LIBOPCODES_CFILES.
+
+ Don't define ARCH_cris for BFD64
+ I believe it is a mistake to define ARCH_cris when BFD64 is defined. It is
+ a 32-bit architecture, so should be placed outside of the BFD64 block.
+
+2022-05-05 Xi Ruoyao <xry111@mengyan1223.wang>
+
+ loongarch: Don't check ABI flags if no code section
+ Various packages (glib and gtk4 for example) produces data-only objects
+ using `ld -r -b binary` or `objcopy`, with no elf header flags set. But
+ these files also have no code sections, so they should be compatible
+ with all ABIs.
+
+ bfd/
+ * elfnn-loongarch.c (elfNN_loongarch_merge_private_bfd_data):
+ Skip ABI checks if the input has no code sections.
+
+ Reported-by: Wu Xiaotian <yetist@gmail.com>
+ Suggested-by: Wang Xuerui <i@xen0n.name>
+
+2022-05-05 Andreas Krebbel <krebbel@linux.ibm.com>
+
+ IBM zSystems: mgrk, mg first operand requires register pair
+ opcodes/
+
+ * s390-opc.c (INSTR_RRF_R0RER): New instruction type.
+ (MASK_RRF_R0RER): Define mask for new instruction type.
+ * s390-opc.txt: Use RRF_R0RER for mgrk and RXY_RERRD for mg.
+
+2022-05-05 H.J. Lu <hjl.tools@gmail.com>
+
+ bfd: Check NULL pointer before setting ref_real
+ PR ld/29086
+ * linker.c (bfd_wrapped_link_hash_lookup): Check NULL pointer
+ before setting ref_real.
+
+2022-05-05 GDB Administrator <gdbadmin@sourceware.org>
+
+ Automatic date update in version.in
+
+2022-05-05 H.J. Lu <hjl.tools@gmail.com>
+
+ LTO: Handle __real_SYM reference in IR
+ When an IR symbol SYM is referenced in IR via __real_SYM, its resolution
+ should be LDPR_PREVAILING_DEF, not PREVAILING_DEF_IRONLY, since LTO
+ doesn't know that __real_SYM should be resolved by SYM.
+
+ bfd/
+
+ PR ld/29086
+ * linker.c (bfd_wrapped_link_hash_lookup): Mark SYM is referenced
+ via __real_SYM.
+
+ include/
+
+ PR ld/29086
+ * bfdlink.h (bfd_link_hash_entry): Add ref_real.
+
+ ld/
+
+ PR ld/29086
+ * plugin.c (get_symbols): Resolve SYM definition to
+ LDPR_PREVAILING_DEF for __real_SYM reference.
+ * testsuite/ld-plugin/lto.exp: Run PR ld/29086 test.
+ * testsuite/ld-plugin/pr29086.c: New file.
+
+2022-05-04 Alan Modra <amodra@gmail.com>
+
+ cris bfd config
+ cris support will be built into a 32-bit bfd if using --enable-targets=all
+ on a 32-bit host, so we may as well make targmatch.h include cris.
+
+ * config.bfd (cris): Remove #idef BFD64.
+
+2022-05-04 Alan Modra <amodra@gmail.com>
+
+ PowerPC64 check_relocs
+ Tidy the dynamic reloc handling code in check_relocs, removing
+ leftover comments and code from when check_relocs was called as each
+ object file was read in.
+
+ * elf64-ppc.c (ppc64_elf_check_relocs): Tidy dynamic reloc
+ handling code.
+ (dec_dynrel_count): Do the same here.
+
+2022-05-04 Tom Tromey <tromey@adacore.com>
+
+ Fix crash when creating index from index
+ My patches yesterday to unify the DWARF index base classes had a bug
+ -- namely, I did the wholesale dynamic_cast-to-static_cast too hastily
+ and introduced a crash. This can be seen by trying to add an index to
+ a file that has an index, or by running a test like gdb-index-cxx.exp
+ using the cc-with-debug-names.exp target board.
+
+ This patch fixes the crash by introducing a new virtual method and
+ removing some of the static casts.
+
+2022-05-04 Luis Machado <luis.machado@arm.com>
+
+ Fix build failure for aarch64 gdbserver
+ We're missing an argument.
+
+2022-05-04 Mark Wielaard <mark@klomp.org>
+
+ gdb: Workaround stringop-overread warning in debuginfod-support.c on s390x
+ For some reason g++ 11.2.1 on s390x produces a spurious warning for
+ stringop-overread in debuginfod_is_enabled for url_view. Add a new
+ DIAGNOSTIC_IGNORE_STRINGOP_OVERREAD macro to suppress this warning.
+
+ include/ChangeLog:
+
+ * diagnostics.h (DIAGNOSTIC_IGNORE_STRINGOP_OVERREAD): New
+ macro.
+
+ gdb/ChangeLog:
+
+ * debuginfod-support.c (debuginfod_is_enabled): Use
+ DIAGNOSTIC_IGNORE_STRINGOP_OVERREAD on s390x.
+
+2022-05-04 Pedro Alves <pedro@palves.net>
+
+ Fix GDBserver Aarch64 Linux regression
+ Luis noticed that the recent changes to gdbserver to make it track
+ process and threads independently regressed a few gdb.multi/*.exp
+ tests for aarch64-linux.
+
+ We started seeing the following internal error for
+ gdb.multi/multi-target-continue.exp for example:
+
+ Starting program: binutils-gdb/gdb/testsuite/outputs/gdb.multi/multi-target-continue/multi-target-continue ^M
+ Error in re-setting breakpoint 2: Remote connection closed^M
+ ../../../repos/binutils-gdb/gdb/thread.c:85: internal-error: inferior_thread: Assertion `current_thread_ != nullptr' failed.^M
+ A problem internal to GDB has been detected,^M
+ further debugging may prove unreliable.
+
+ A backtrace looks like:
+
+ #0 thread_regcache_data (thread=thread@entry=0x0) at ../../../repos/binutils-gdb/gdbserver/inferiors.cc:120
+ #1 0x0000aaaaaaabf0e8 in get_thread_regcache (thread=0x0, fetch=fetch@entry=0) at ../../../repos/binutils-gdb/gdbserver/regcache.cc:31
+ #2 0x0000aaaaaaad785c in is_64bit_tdesc () at ../../../repos/binutils-gdb/gdbserver/linux-aarch64-low.cc:194
+ #3 0x0000aaaaaaad8a48 in aarch64_target::sw_breakpoint_from_kind (this=<optimized out>, kind=4, size=0xffffffffef04) at ../../../repos/binutils-gdb/gdbserver/linux-aarch64-low.cc:3226
+ #4 0x0000aaaaaaabe220 in bp_size (bp=0xaaaaaab6f3d0) at ../../../repos/binutils-gdb/gdbserver/mem-break.cc:226
+ #5 check_mem_read (mem_addr=187649984471104, buf=buf@entry=0xaaaaaab625d0 "\006", mem_len=mem_len@entry=56) at ../../../repos/binutils-gdb/gdbserver/mem-break.cc:1862
+ #6 0x0000aaaaaaacc660 in read_inferior_memory (memaddr=<optimized out>, myaddr=0xaaaaaab625d0 "\006", len=56) at ../../../repos/binutils-gdb/gdbserver/target.cc:93
+ #7 0x0000aaaaaaac3d9c in gdb_read_memory (len=56, myaddr=0xaaaaaab625d0 "\006", memaddr=187649984471104) at ../../../repos/binutils-gdb/gdbserver/server.cc:1071
+ #8 gdb_read_memory (memaddr=187649984471104, myaddr=0xaaaaaab625d0 "\006", len=56) at ../../../repos/binutils-gdb/gdbserver/server.cc:1048
+ #9 0x0000aaaaaaac82a4 in process_serial_event () at ../../../repos/binutils-gdb/gdbserver/server.cc:4307
+ #10 handle_serial_event (err=<optimized out>, client_data=<optimized out>) at ../../../repos/binutils-gdb/gdbserver/server.cc:4520
+ #11 0x0000aaaaaaafbcd0 in gdb_wait_for_event (block=block@entry=1) at ../../../repos/binutils-gdb/gdbsupport/event-loop.cc:700
+ #12 0x0000aaaaaaafc0b0 in gdb_wait_for_event (block=1) at ../../../repos/binutils-gdb/gdbsupport/event-loop.cc:596
+ #13 gdb_do_one_event () at ../../../repos/binutils-gdb/gdbsupport/event-loop.cc:237
+ #14 0x0000aaaaaaacacb0 in start_event_loop () at ../../../repos/binutils-gdb/gdbserver/server.cc:3518
+ #15 captured_main (argc=4, argv=<optimized out>) at ../../../repos/binutils-gdb/gdbserver/server.cc:3998
+ #16 0x0000aaaaaaab66dc in main (argc=<optimized out>, argv=<optimized out>) at ../../../repos/binutils-gdb/gdbserver/server.cc:4084
+
+ This sequence of functions is invoked due to a series of conditions:
+
+ 1 - The probe-based breakpoint mechanism failed (for some reason) so ...
+
+ 2 - ... gdbserver has to know what type of architecture it is dealing
+ with so it can pick the right breakpoint kind, so it wants to
+ check if we have a 64-bit target.
+
+ 3 - To determine the size of a register, we currently fetch the
+ current thread's register cache, and the current thread pointer
+ is now nullptr.
+
+ In #3, the current thread is nullptr because gdb_read_memory clears it
+ on purpose, via set_desired_process, exactly to expose code relying on
+ the current thread when it shouldn't. It was always possible to end
+ up in this situation (when the current thread exits), but it was
+ harder to reproduce before.
+
+ This commit fixes it by tweaking is_64bit_tdesc to look at the current
+ process's tdesc instead of the current thread's tdesc.
+
+ Note that the thread's tdesc is itself filled from the process's
+ tdesc, so this should be equivalent:
+
+ struct regcache *
+ get_thread_regcache (struct thread_info *thread, int fetch)
+ {
+ struct regcache *regcache;
+
+ regcache = thread_regcache_data (thread);
+
+ ...
+ if (regcache == NULL)
+ {
+ struct process_info *proc = get_thread_process (thread);
+
+ gdb_assert (proc->tdesc != NULL);
+
+ regcache = new_register_cache (proc->tdesc);
+ set_thread_regcache_data (thread, regcache);
+ }
+ ...
+
+ Change-Id: Ibc809d7345e70a2f058b522bdc5cdbdca97e2cdc
+
+2022-05-04 Simon Marchi <simon.marchi@efficios.com>
+
+ gdb/remote: send qSymbol to all inferiors on startup
+ start_remote_1 calls remote_check_symbols after things are set up to
+ give the remote side a chance to look up symbols. One call to
+ remote_check_symbols sets the "general thread", if needed, and sends one
+ qSymbol packet. However, a remote target could have more than one
+ process on initial connection, and this would send a qSymbol for only
+ one of these processes.
+
+ Change it to iterate on all the target's inferiors and send a qSymbol
+ packet for each one.
+
+ I tested this by changing gdbserver to spawn two processes on startup:
+
+ diff --git a/gdbserver/server.cc b/gdbserver/server.cc
+ index 33c42714e72..9b682e9f85f 100644
+ --- a/gdbserver/server.cc
+ +++ b/gdbserver/server.cc
+ @@ -3939,6 +3939,7 @@ captured_main (int argc, char *argv[])
+
+ /* Wait till we are at first instruction in program. */
+ target_create_inferior (program_path.get (), program_args);
+ + target_create_inferior (program_path.get (), program_args);
+
+ /* We are now (hopefully) stopped at the first instruction of
+ the target process. This assumes that the target process was
+
+ Instead of hacking GDBserver, it should also be possible to test this by
+ starting manually two inferiors on an "extended-remote" connection,
+ disconnecting from GDBserver (with the disconnect command), and
+ re-connecting.
+
+ I was able to see qSymbol being sent for each inferior:
+
+ [remote] Sending packet: $Hgp828dc.828dc#1f
+ [remote] Packet received: OK
+ [remote] Sending packet: $qSymbol::#5b
+ [remote] Packet received: qSymbol:6764625f6167656e745f6764625f74705f686561705f627566666572
+ [remote] Sending packet: $qSymbol::6764625f6167656e745f6764625f74705f686561705f627566666572#1e
+ [remote] Packet received: qSymbol:6e70746c5f76657273696f6e
+ [remote] Sending packet: $qSymbol::6e70746c5f76657273696f6e#4d
+ [remote] Packet received: OK
+ [remote] Sending packet: $Hgp828dd.828dd#21
+ [remote] Packet received: OK
+ [remote] Sending packet: $qSymbol::#5b
+ [remote] Packet received: qSymbol:6764625f6167656e745f6764625f74705f686561705f627566666572
+ [remote] Sending packet: $qSymbol::6764625f6167656e745f6764625f74705f686561705f627566666572#1e
+ [remote] Packet received: qSymbol:6e70746c5f76657273696f6e
+ [remote] Sending packet: $qSymbol::6e70746c5f76657273696f6e#4d
+ [remote] Packet received: OK
+
+ Note that there would probably be more work to be done to fully support
+ this scenario, more things that need to be done for each discovered
+ inferior instead of just for one.
+
+ Change-Id: I21c4ecf6367391e2e389b560f0b4bd906cf6472f
+
+2022-05-04 Simon Marchi <simon.marchi@polymtl.ca>
+
+ gdb/remote: iterate on pspace inferiors in remote_new_objfile
+ Commit 152a17495663 ("gdb: prune inferiors at end of
+ fetch_inferior_event, fix intermittent failure of
+ gdb.threads/fork-plus-threads.exp") broke some tests with the
+ native-gdbserver board, such as:
+
+ (gdb) PASS: gdb.base/step-over-syscall.exp: detach-on-fork=off: follow-fork=child: break cond on target : vfork: break marker
+ continue^M
+ Continuing.^M
+ terminate called after throwing an instance of 'gdb_exception_error'^M
+
+ I can manually reproduce the issue by running (just the commands that
+ the test does as a one liner):
+
+ $ ./gdb -q --data-directory=data-directory \
+ testsuite/outputs/gdb.base/step-over-syscall/step-over-vfork \
+ -ex "tar rem | ../gdbserver/gdbserver - testsuite/outputs/gdb.base/step-over-syscall/step-over-vfork" \
+ -ex "b main" \
+ -ex c \
+ -ex "d 1" \
+ -ex "set displaced-stepping off" \
+ -ex "b *0x7ffff7d7ac5a if main == 0" \
+ -ex "set detach-on-fork off" \
+ -ex "set follow-fork-mode child" \
+ -ex c \
+ -ex "inferior 1" \
+ -ex "b marker" \
+ -ex c
+
+ ... where 0x7ffff7d7ac5a is the exact address of the vfork syscall
+ (which can be found by looking at gdb.log).
+
+ The important part of the above is that a vfork syscall creates inferior
+ 2, then inferior 2 executes until exit, then we switch back to inferior
+ 1 and try to resume it.
+
+ The uncaught exception happens here:
+
+ #4 0x00005596969d81a9 in error (fmt=0x559692da9e40 "Cannot execute this command while the target is running.\nUse the \"interrupt\" command to stop the target\nand then try again.")
+ at /home/simark/src/binutils-gdb/gdbsupport/errors.cc:43
+ #5 0x0000559695af6f66 in remote_target::putpkt_binary (this=0x617000038080, buf=0x559692da4380 "qSymbol::", cnt=9) at /home/simark/src/binutils-gdb/gdb/remote.c:9560
+ #6 0x0000559695af6aaf in remote_target::putpkt (this=0x617000038080, buf=0x559692da4380 "qSymbol::") at /home/simark/src/binutils-gdb/gdb/remote.c:9518
+ #7 0x0000559695ab50dc in remote_target::remote_check_symbols (this=0x617000038080) at /home/simark/src/binutils-gdb/gdb/remote.c:5141
+ #8 0x0000559695b3cccf in remote_new_objfile (objfile=0x0) at /home/simark/src/binutils-gdb/gdb/remote.c:14600
+ #9 0x0000559693bc52a9 in std::__invoke_impl<void, void (*&)(objfile*), objfile*> (__f=@0x61b0000167f8: 0x559695b3cb1d <remote_new_objfile(objfile*)>) at /usr/include/c++/11.2.0/bits/invoke.h:61
+ #10 0x0000559693bb2848 in std::__invoke_r<void, void (*&)(objfile*), objfile*> (__fn=@0x61b0000167f8: 0x559695b3cb1d <remote_new_objfile(objfile*)>) at /usr/include/c++/11.2.0/bits/invoke.h:111
+ #11 0x0000559693b8dddf in std::_Function_handler<void (objfile*), void (*)(objfile*)>::_M_invoke(std::_Any_data const&, objfile*&&) (__functor=..., __args#0=@0x7ffe0bae0590: 0x0) at /usr/include/c++/11.2.0/bits/std_function.h:291
+ #12 0x00005596956374b2 in std::function<void (objfile*)>::operator()(objfile*) const (this=0x61b0000167f8, __args#0=0x0) at /usr/include/c++/11.2.0/bits/std_function.h:560
+ #13 0x0000559695633c64 in gdb::observers::observable<objfile*>::notify (this=0x55969ef5c480 <gdb::observers::new_objfile>, args#0=0x0) at /home/simark/src/binutils-gdb/gdb/../gdbsupport/observable.h:150
+ #14 0x0000559695df6cc2 in clear_symtab_users (add_flags=...) at /home/simark/src/binutils-gdb/gdb/symfile.c:2873
+ #15 0x000055969574c263 in program_space::~program_space (this=0x6120000c8a40, __in_chrg=<optimized out>) at /home/simark/src/binutils-gdb/gdb/progspace.c:154
+ #16 0x0000559694fc086b in delete_inferior (inf=0x61700003bf80) at /home/simark/src/binutils-gdb/gdb/inferior.c:205
+ #17 0x0000559694fc341f in prune_inferiors () at /home/simark/src/binutils-gdb/gdb/inferior.c:390
+ #18 0x0000559695017ada in fetch_inferior_event () at /home/simark/src/binutils-gdb/gdb/infrun.c:4293
+ #19 0x0000559694f629e6 in inferior_event_handler (event_type=INF_REG_EVENT) at /home/simark/src/binutils-gdb/gdb/inf-loop.c:41
+ #20 0x0000559695b3b0e3 in remote_async_serial_handler (scb=0x6250001ef100, context=0x6170000380a8) at /home/simark/src/binutils-gdb/gdb/remote.c:14466
+ #21 0x0000559695c59eb7 in run_async_handler_and_reschedule (scb=0x6250001ef100) at /home/simark/src/binutils-gdb/gdb/ser-base.c:138
+ #22 0x0000559695c5a42a in fd_event (error=0, context=0x6250001ef100) at /home/simark/src/binutils-gdb/gdb/ser-base.c:189
+ #23 0x00005596969d9ebf in handle_file_event (file_ptr=0x60700005af40, ready_mask=1) at /home/simark/src/binutils-gdb/gdbsupport/event-loop.cc:574
+ #24 0x00005596969da7fa in gdb_wait_for_event (block=0) at /home/simark/src/binutils-gdb/gdbsupport/event-loop.cc:700
+ #25 0x00005596969d8539 in gdb_do_one_event () at /home/simark/src/binutils-gdb/gdbsupport/event-loop.cc:212
+
+ If I enable "set debug infrun" just before the last continue, we see:
+
+ (gdb) continue
+ Continuing.
+ [infrun] clear_proceed_status_thread: 965604.965604.0
+ [infrun] proceed: enter
+ [infrun] proceed: addr=0xffffffffffffffff, signal=GDB_SIGNAL_DEFAULT
+ [infrun] scoped_disable_commit_resumed: reason=proceeding
+ [infrun] start_step_over: enter
+ [infrun] start_step_over: stealing global queue of threads to step, length = 0
+ [infrun] operator(): step-over queue now empty
+ [infrun] start_step_over: exit
+ [infrun] resume_1: step=0, signal=GDB_SIGNAL_0, trap_expected=0, current thread [965604.965604.0] at 0x7ffff7d7ac5c
+ [infrun] do_target_resume: resume_ptid=965604.0.0, step=0, sig=GDB_SIGNAL_0
+ [infrun] prepare_to_wait: prepare_to_wait
+ [infrun] reset: reason=proceeding
+ [infrun] maybe_set_commit_resumed_all_targets: enabling commit-resumed for target remote
+ [infrun] maybe_call_commit_resumed_all_targets: calling commit_resumed for target remote
+ [infrun] proceed: exit
+ [infrun] fetch_inferior_event: enter
+ [infrun] scoped_disable_commit_resumed: reason=handling event
+ [infrun] do_target_wait: Found 2 inferiors, starting at #1
+ [infrun] random_pending_event_thread: None found.
+ [infrun] print_target_wait_results: target_wait (-1.0.0 [process -1], status) =
+ [infrun] print_target_wait_results: 965604.965604.0 [Thread 965604.965604],
+ [infrun] print_target_wait_results: status->kind = VFORK_DONE
+ [infrun] handle_inferior_event: status->kind = VFORK_DONE
+ [infrun] context_switch: Switching context from 0.0.0 to 965604.965604.0
+ [infrun] handle_vfork_done: not waiting for a vfork-done event
+ [infrun] start_step_over: enter
+ [infrun] start_step_over: stealing global queue of threads to step, length = 0
+ [infrun] operator(): step-over queue now empty
+ [infrun] start_step_over: exit
+ [infrun] resume_1: step=0, signal=GDB_SIGNAL_0, trap_expected=0, current thread [965604.965604.0] at 0x7ffff7d7ac5c
+ [infrun] do_target_resume: resume_ptid=965604.0.0, step=0, sig=GDB_SIGNAL_0
+ [infrun] prepare_to_wait: prepare_to_wait
+ [infrun] reset: reason=handling event
+ [infrun] maybe_set_commit_resumed_all_targets: enabling commit-resumed for target remote
+ [infrun] maybe_call_commit_resumed_all_targets: calling commit_resumed for target remote
+ terminate called after throwing an instance of 'gdb_exception_error'
+
+ What happens is:
+
+ - After doing the "continue" on inferior 1, the remote target gives us
+ a VFORK_DONE event. The core ignores it and resumes inferior 1.
+ - Since prune_inferiors is now called after each handled event, in
+ fetch_inferior_event, it is called after we handled that VFORK_DONE
+ event and resumed inferior 1.
+ - Inferior 2 is pruned, which (see backtrace above) causes its program
+ space to be deleted, which clears the symtabs for that program space,
+ which calls the new_objfile observable and remote_new_objfile
+ observer (with a nullptr objfile, to indicate that the previously
+ loaded symbols have been discarded), which calls
+ remote_check_symbols.
+
+ remote_check_symbols is the function that sends the qSymbol packet, to
+ let the remote side ask for symbol addresses. The problem is that the
+ remote target is working in all-stop / sync mode and is currently
+ resumed. It has sent a vCont packet to resume the target and is waiting
+ for a stop reply. It can't send any packets in the mean time. That
+ causes the exception to be thrown.
+
+ This wasn't a problem before, when prune_inferiors was called in
+ normal_stop, because it was always called at a time the target was not
+ resumed.
+
+ An important observation here is that the new_objfile observable is
+ invoked for a change in inferior 2's program space (inferior 2's program
+ space is the current program space). Inferior 2 isn't bound to any
+ process on the remote side (it has exited, that's why it's being
+ pruned). It doesn't make sense to try to send a qSymbol packet for a
+ process that doesn't exist on the remote side. remote_check_symbols
+ actually attempts to avoid that:
+
+ /* The remote side has no concept of inferiors that aren't running
+ yet, it only knows about running processes. If we're connected
+ but our current inferior is not running, we should not invite the
+ remote target to request symbol lookups related to its
+ (unrelated) current process. */
+ if (!target_has_execution ())
+ return;
+
+ The problem here is that while inferior 2's program space is the current
+ program space, inferior 1 is the current inferior. So the check above
+ passes, since inferior has execution. We therefore try to send a
+ qSymbol packet for inferior 1 in reaction to a change in inferior 2's
+ program space, that's wrong.
+
+ This exposes a conceptual flaw in remote_new_objfile. The "new_objfile"
+ event concerns a specific program space, which can concern multiple
+ inferiors, as inferiors can share a program space. We shouldn't
+ consider the current inferior at all, but instead all inferiors bound to
+ the affected program space. Especially since the current inferior can
+ be unrelated to the current program space at that point.
+
+ To be clear, we are in this state because ~program_space sets itself as
+ the current program space, but there is no more inferior having that
+ program space to switch to, inferior 2 has already been unlinked.
+
+ To fix this, make remote_new_objfile iterate on all inferiors bound to
+ the affected program space. Remove the target_has_execution check from
+ remote_check_symbols, replace it with an assert. All callers must
+ ensure that the current inferior has execution before calling it.
+
+ Change-Id: Ica643145bcc03115248290fd310cadab8ec8371c
+
+2022-05-04 Jan Beulich <jbeulich@suse.com>
+
+ Dwarf: rename yet another instance of "index"
+ As before, on sufficiently old glibc this conflicts with a global
+ identifier in the library headers. While there also zap the unusual
+ padding by blanks.
+
+2022-05-04 Martin Liska <mliska@suse.cz>
+
+ LTO plugin: sync header file with GCC
+ include/ChangeLog:
+
+ * plugin-api.h (enum ld_plugin_tag): Sync with GCC.
+
+2022-05-04 Alan Modra <amodra@gmail.com>
+
+ PowerPC32 treatment of absolute symbols
+ As already done for PowerPC64, fix dynamic relocs for absolute symbols.
+ The patch also tidies the dynamic reloc handling code in check_relocs,
+ removing leftover comments and code from when check_relocs was called
+ as each object file was read in.
+
+ bfd/
+ * elf32-ppc.c (ppc_elf_check_relocs): Set isym and ifunc earlier.
+ Rearrange tests for dynamic relocs, handling absolute symbols.
+ (allocate_dynrelocs): Don't allocate dynamic relocs for locally
+ defined absolute symbols.
+ (ppc_elf_size_dynamic_sections): Similarly.
+ (ppc_elf_relocate_section): Similarly.
+ ld/
+ * testsuite/ld-powerpc/abs32-pie.d,
+ * testsuite/ld-powerpc/abs32-pie.r,
+ * testsuite/ld-powerpc/abs32-reloc.s,
+ * testsuite/ld-powerpc/abs32-shared.d,
+ * testsuite/ld-powerpc/abs32-shared.r,
+ * testsuite/ld-powerpc/abs32-static.d,
+ * testsuite/ld-powerpc/abs32-static.r: New tests.
+ * testsuite/ld-powerpc/powerpc.exp: Run them.
+
+2022-05-04 John Baldwin <jhb@FreeBSD.org>
+
+ gdbserver: Fix build after adding tls feature to arm tdesc.
+
+2022-05-04 GDB Administrator <gdbadmin@sourceware.org>
+
+ Automatic date update in version.in
+
+2022-05-04 John Baldwin <jhb@FreeBSD.org>
+
+ NEWS: Add a note for TLS support on FreeBSD/arm and FreeBSD/Aarch64.
+
+ Read the tpidr register from NT_ARM_TLS on Linux.
+
+ gdbserver: Read the tpidr register from NT_ARM_TLS on Linux.
+
+ Read the tpidr register from NT_ARM_TLS core dump notes on Linux Aarch64.
+
+ Fetch the NT_ARM_TLS register set for native FreeBSD/Aarch64 processes.
+ This permits resolving TLS variables.
+
+ Support TLS variables on FreeBSD/Aarch64.
+ Derive the pointer to the DTV array from the tpidr register.
+
+ Read the tpidr register from NT_ARM_TLS core dump notes on FreeBSD/Aarch64.
+
+ Add an aarch64-tls feature which includes the tpidr register.
+
+ Fetch the NT_ARM_TLS register set for native FreeBSD/arm processes.
+ This permits resolving TLS variables.
+
+ Support TLS variables on FreeBSD/arm.
+ Derive the pointer to the DTV array from the tpidruro register.
+
+ Read the tpidruro register from NT_ARM_TLS core dump notes on FreeBSD/arm.
+
+ Add an arm-tls feature which includes the tpidruro register from CP15.
+
+ fbsd-nat: Add helper routines for register sets using PT_[G]SETREGSET.
+ FreeBSD's kernel has recently added PT_GETREGSET and PT_SETREGSET
+ operations to fetch a register set named by an ELF note type. These
+ helper routines provide helpers to check for a register set's
+ existence, fetch registers for a register set, and store registers to
+ a register set.
+
+2022-05-03 H.J. Lu <hjl.tools@gmail.com>
+
+ ld: Regenerate aclocal.m4 with automake 1.15.1
+ * aclocal.m4: Regenerate with automake 1.15.1.
+
+2022-05-03 Pedro Alves <pedro@palves.net>
+
+ gdbserver: track current process as well as current thread
+ The recent commit 421490af33bf ("gdbserver/linux: Access memory even
+ if threads are running") caused a regression in
+ gdb.threads/access-mem-running-thread-exit.exp with gdbserver, which I
+ somehow missed. Like so:
+
+ (gdb) print global_var
+ Cannot access memory at address 0x555555558010
+ (gdb) FAIL: gdb.threads/access-mem-running-thread-exit.exp: non-stop: access mem (print global_var after writing, inf=2, iter=1)
+
+ The problem starts with GDB telling GDBserver to select a thread, via
+ the Hg packet, which GDBserver complies with, then that thread exits,
+ and GDB, without knowing the thread is gone, tries to write to memory,
+ through the context of the previously selected Hg thread.
+
+ GDBserver's GDB-facing memory access routines, gdb_read_memory and
+ gdb_write_memory, call set_desired_thread to make GDBserver re-select
+ the thread that GDB has selected with the Hg packet. Since the thread
+ is gone, set_desired_thread returns false, and the memory access
+ fails.
+
+ Now, to access memory, it doesn't really matter which thread is
+ selected. All we should need is the target process. Even if the
+ thread that GDB previously selected is gone, and GDB does not yet know
+ about that exit, it shouldn't matter, GDBserver should still know
+ which process that thread belonged to.
+
+ Fix this by making GDBserver track the current process separately,
+ like GDB also does. Add a new set_desired_process routine that is
+ similar to set_desired_thread, but just sets the current process,
+ leaving the current thread as NULL. Use it in the GDB-facing memory
+ read and write routines, to avoid failing if the selected thread is
+ gone, but the process is still around.
+
+ Change-Id: I4ff97cb6f42558efbed224b30d5c71f6112d44cd
+
+2022-05-03 Pedro Alves <pedro@palves.net>
+
+ Fix gdb.threads/access-mem-running-thread-exit.exp w/ native-extended-gdbserver
+ When testing gdb.threads/access-mem-running-thread-exit.exp with
+ --target_board=native-extended-gdbserver, we get:
+
+ Running gdb.threads/access-mem-running-thread-exit.exp ...
+ FAIL: gdb.threads/access-mem-running-thread-exit.exp: non-stop: second inferior: runto: run to main
+ WARNING: Timed out waiting for EOF in server after monitor exit
+
+ === gdb Summary ===
+
+ # of expected passes 3
+ # of unexpected failures 1
+ # of unsupported tests 1
+
+ The problem is that the testcase spawns a second inferior with
+ -no-connection, and then runto_main does "run", which fails like so:
+
+ (gdb) run
+ Don't know how to run. Try "help target".
+ (gdb) FAIL: gdb.threads/access-mem-running-thread-exit.exp: non-stop: second inferior: runto: run to main
+
+ That "run" above failed because native-extended-gdbserver forces "set
+ auto-connect-native-target off", to prevent testcases from mistakenly
+ running programs with the native target, which would exactly be the
+ case here.
+
+ Fix this by letting the second inferior share the first inferior's
+ connection everywhere except on targets that do reload on run (e.g.,
+ --target_board=native-gdbserver).
+
+ Change-Id: Ib57105a238cbc69c57220e71261219fa55d329ed
+
+2022-05-03 Andrew Burgess <aburgess@redhat.com>
+
+ gdb: add some additional thread status debug output
+ While working on this patch:
+
+ https://sourceware.org/pipermail/gdb-patches/2022-January/185109.html
+
+ I found it really useful to print the executing/resumed status of all
+ threads (or all threads in a particular inferior) at various
+ places (e.g. when a new inferior is started, when GDB attaches, etc).
+
+ This debug was originally part of the above patch, but I wanted to
+ rewrite this as a separate patch and move the code into a new function
+ in infrun.h, which is what this patch does.
+
+ Unless 'set debug infrun on' is in effect, then there should be no
+ user visible changes after this commit.
+
+2022-05-03 Nick Clifton <nickc@redhat.com>
+
+ Add a linker warning when creating potentially dangerous executable segments. Add tests, options to disabke and configure switches to choose defaults.
+
+ Fix potential arithmetic overflow in the linker's plugin handling code.
+ PR 29101
+ * libdep_plugin.c (get_libdeps): Check for overflow when computing
+ amount of memory to allocate.
+
+2022-05-03 Andrew Burgess <aburgess@redhat.com>
+
+ objdump: fix styled printing of addresses
+ Previous work to add styled disassembler output missed a case in
+ objdump_print_addr, which is fixed in this commit.
+
+2022-05-03 Andrew Burgess <aburgess@redhat.com>
+
+ gdb/testsuite: small cleanup in mi-break-qualified.exp
+ It is not necessary to pass an empty string to mi_gdb_start, passing
+ the empty string is equivalent to passing no arguments, which is what
+ we do everywhere else (that we don't need to specify an actual
+ argument).
+
+ The only place we use 'mi_gdb_start ""' is in
+ gdb.mi/mi-break-qualified.exp, so in this commit I just replace that
+ with a call to 'mi_gdb_start' - just for consistency.
+
+ There should be no change in what is tested after this commit.
+
+2022-05-03 Andrew Burgess <aburgess@redhat.com>
+
+ gdb/testsuite: change mi_gdb_start to take a list of flags
+ After this previous commit I was thinking about the API of
+ mi_gdb_start. I felt that the idea of passing flags as separate
+ arguments and using 'args' to gather these into a list, though clever,
+ was not an intuitive API.
+
+ In this commit I modify mi_gdb_start so that it expects a single
+ argument, which should be a list of flags. Thus, where we previously
+ would have said:
+
+ mi_gdb_start separate-mi-tty separate-inferior-tty
+
+ We would now say:
+
+ mi_gdb_start { separate-mi-tty separate-inferior-tty }
+
+ However, it turns out we never actually call mi_gdb_start passing two
+ arguments in this way at all. We do in some places do this:
+
+ mi_gdb_start separate-inferior-tty
+
+ But that's fine, a single string like this works equally well as a
+ single item list, so this will not need updating.
+
+ There is also one place where we do this:
+
+ eval mi_gdb_start $start_ops
+
+ where $start_ops is a list that might contains 0, 1, or 2 items. The
+ eval here is used to expand the $start_ops list so mi_gdb_start sees
+ the list contents as separate arguments. In this case we just need to
+ drop the use of eval.
+
+ I think that the new API is more intuitive, but others might
+ disagree, in which case I can drop this change.
+
+ There should be no change in what is tested after this commit.
+
+2022-05-03 Andrew Burgess <aburgess@redhat.com>
+
+ gdb/testsuite: fix mi-exec-run.exp with native-extended-gdbserver board
+ When running with the native-extended-gdbserver board, I currently see
+ one failure in gdb.mi/mi-exec-run.exp:
+
+ FAIL: gdb.mi/mi-exec-run.exp: inferior-tty=separate: mi=separate: force-fail=0: breakpoint hit reported on console (timeout)
+
+ In this test the MI interface should be started in a separate tty,
+ which means we should have a CLI tty and an MI tty, however, this is
+ not happening. Instead GDB is just started in MI mode and there is no
+ CLI tty.
+
+ The test script tries to switch between the CLI an MI terminals and
+ look for some expected output on each, however, as there is no CLI
+ terminal the expected output never arrives, and the test times out.
+
+ It turns out that this is not a GDB problem, rather, this is an issue
+ with argument passing within the test script.
+
+ The proc default_mi_gdb_start expects to take a set of flags (strings)
+ as arguments, each of flag is expected to be a separate argument. The
+ default_mi_gdb_start proc collects all its arguments into a list using
+ the special 'args' parameter name, and then iterates over this list to
+ see which flags were passed.
+
+ In mi_gdb_start, which forwards to default_mi_gdb_start, the arguments
+ are also gathered into the 'args' parameter list, but are then
+ expanded back to be separate arguments using the eval trick, i.e.:
+
+ proc mi_gdb_start { args } {
+ return [eval default_mi_gdb_start $args]
+ }
+
+ This ensures that when we arrive in default_mi_gdb_start each flag is
+ a separate argument, rather than appearing as a single list containing
+ all arguments.
+
+ When using the native-extended-gdbserver board however, the file
+ boards/native-extended-gdbserver.exp is loaded, and this file replaces
+ the default mi_gdb_start with its own version.
+
+ This new mi_gdb_start also gathers the arguments into an 'args' list,
+ but forgets to expand the arguments out using the eval trick.
+
+ As a result, when using the native-extended-gdbserver board, by the
+ time we get to default_mi_gdb_start, we end up with the args list
+ containing a single item, which is a list containing all the arguments
+ the user passed.
+
+ What this means is that if the user passes two arguments, then, in
+ default_mi_gdb_start, instead of seeing two separate arguments, we see
+ a single argument made by concatenating the two arguments together.
+
+ The only place this is a problem is in the test mi-exec-run.exp,
+ which (as far as I can see) is the only test where we might try to
+ pass both arguments at the same time. Currently we think we passed
+ both arguments to mi_gdb_start, but mi_gdb_start behaves as if no
+ arguments were passed.
+
+ This commit fixes the problem by making use of the eval trick within
+ the native-extended-gdbserver version of mi_gdb_start. After this,
+ the FAIL listed at the top of this message is resolved.
+
+2022-05-03 Andrew Burgess <aburgess@redhat.com>
+
+ gdb: fix failures in gdb.mi/mi-exec-run.exp with native-extended-gdbserver
+ When running the gdb.mi/mi-exec-run.exp test using the
+ native-extended-gdbserver I see failures like this:
+
+ FAIL: gdb.mi/mi-exec-run.exp: inferior-tty=main: mi=main: force-fail=1: run failure detected
+ FAIL: gdb.mi/mi-exec-run.exp: inferior-tty=main: mi=separate: force-fail=1: run failure detected
+ FAIL: gdb.mi/mi-exec-run.exp: inferior-tty=separate: mi=separate: force-fail=1: run failure detected
+
+ There's a race condition here, so you might see a slightly different
+ set of failures, but I always see some from the 'run failure detected'
+ test.
+
+ NOTE: I also see an additional test failure:
+
+ FAIL: gdb.mi/mi-exec-run.exp: inferior-tty=separate: mi=separate: force-fail=0: breakpoint hit reported on console (timeout)
+
+ but that is a completely different issue, and is not being addressed
+ in this commit.
+
+ The problem for the 'run failure detected' test is that we end up
+ in gdb_expect looking for output from two spawn-ids, one from
+ gdbserver, and one from gdb. We're looking for one output pattern
+ from each spawn-id, and for the test to pass we need to see both
+ patterns.
+
+ Now, if gdb exits then this is a test failure (this would indicate gdb
+ crashing, which is bad), so we have an eof pattern associated with
+ the gdb spawn-id.
+
+ However, in this particular test we expect gdbserver to fail to
+ execute the binary (the test binary is set non-executable), and so we
+ get an error message from gdbserver (which matches the pattern), and
+ then gdbserver exits, this is expected.
+
+ The problem is that after spotting the pattern from gdbserver, we
+ often see the eof from gdbserver before we see the pattern from gdb.
+ If this happens then we drop out of the gdb_expect without ever seeing
+ the pattern from gdb, and fail the test.
+
+ In this commit, I place the spawn-id of gdbserver into a global
+ variable, and then use this global variable as the -i option within
+ the gdb_expect.
+
+ Now, once we have seen the expected pattern on the gdbserver spawn-id,
+ the global variable is cleared. After this the gdb_expect no longer
+ checks the gdbserver spawn-id for additional output, and so never sees
+ the eof event. This leaves the gdb_expect running, which allows the
+ pattern from gdb to be seen, and for the test to pass.
+
+ I now see no failures relating to 'run failure detected'.
+
+2022-05-03 GDB Administrator <gdbadmin@sourceware.org>
+
+ Automatic date update in version.in
+
+2022-05-02 Tom de Vries <tdevries@suse.de>
+
+ [gdb/testsuite] Fix gdb.cp/align.exp with gcc 12.1 / 11.3
+ Starting with gcc 12.1 / gcc 11.3, for test-case gdb.cp/align.exp we run into:
+ ...
+ align.cc:29:23: error: invalid application of 'alignof' to a void type^M
+ 29 | unsigned a_void = alignof (void);^M
+ | ^~~~~~~~~~~~~~^M
+ ...
+
+ Fix this by using __alignof__ instead.
+
+ Tested on x86_64-linux, with gcc 7.5.0, gcc 12.1 and clang 12.0.1.
+
+2022-05-02 Aaron Merey <amerey@redhat.com>
+
+ gdb/debuginfod: Whitespace-only URL should disable debuginfod
+ Currently debuginfod is disabled when the string of server URLs
+ is unset or set to be the empty string (via the $DEBUGINFOD_URLS
+ environment variable or the 'set debuginfod urls' gdb command).
+
+ Extend this functionality so that a whitespace-only URL also disables
+ debuginfod.
+
+ Modify a testcase to verify that a whitespace-only URL disables
+ debuginfod.
+
+2022-05-02 Simon Marchi <simon.marchi@efficios.com>
+
+ gdb: remove type_wanted parameter from a few functions
+ The type_wanted value, passed down to the create_sals_from_location
+ callback, is never used. Remove it.
+
+ Change-Id: Ic363ee13f6af593a3e875ff7fe46de130cdc190c
+
+2022-05-02 Simon Marchi <simon.marchi@efficios.com>
+
+ gnulib: update to bd11400942d6
+ Update the gnulib import to fixes these issues:
+
+ - GDB build with clang + glibc < 2.33.
+
+ https://git.savannah.gnu.org/cgit/gnulib.git/commit/?id=d6a07b4dc21b3118727743142c678858df442853
+ https://lists.gnu.org/archive/html/bug-gnulib/2022-04/msg00072.html
+
+ With glibc < 2.33, gnulib (since relatively recently) enables a
+ replacement for free (see gnulib/import/m4/free.m4). In that path,
+ clang shows this error:
+
+ make[2]: Entering directory '/home/smarchi/build/binutils-gdb-clang/gdbsupport'
+ CXX agent.o
+ In file included from /home/smarchi/src/binutils-gdb/gdbsupport/agent.cc:20:
+ In file included from /home/smarchi/src/binutils-gdb/gdbsupport/common-defs.h:95:
+ ../gnulib/import/string.h:636:19: error: exception specification in declaration does not match previous declaration
+ _GL_EXTERN_C void free (void *) throw ();
+ ^
+ ../gnulib/import/stdlib.h:737:17: note: expanded from macro 'free'
+ # define free rpl_free
+ ^
+ ../gnulib/import/stdlib.h:739:1: note: previous declaration is here
+ _GL_FUNCDECL_RPL (free, void, (void *ptr));
+ ^
+ ../gnulib/import/sys/select.h:251:23: note: expanded from macro '_GL_FUNCDECL_RPL'
+ _GL_FUNCDECL_RPL_1 (rpl_##func, rettype, parameters_and_attributes)
+ ^
+ <scratch space>:139:1: note: expanded from here
+ rpl_free
+ ^
+
+ The gnulib commit mentioned fixes the exception specification of `free`.
+
+ - GDB build on RHEL 7:
+
+ CC libgnu_a-openat-proc.o
+ In file included from /usr/include/string.h:633,
+ from ./string.h:41,
+ from ../../../binutils-gdb/gnulib/import/openat-proc.c:30:
+ ./string.h:1105:1: error: expected identifier or '(' before '__extension__'
+ 1105 | _GL_FUNCDECL_SYS (strndup, char *,
+ | ^~~~~~~~~~~~~~~~
+
+ https://git.savannah.gnu.org/cgit/gnulib.git/commit/?id=84863a1c4dc8cca8fb0f6f670f67779cdd2d543b
+ https://lists.gnu.org/archive/html/bug-gnulib/2022-04/msg00075.html
+
+ Change-Id: Ibd51302feece6f385d0c53e0d08921b5d95e2776
+
+2022-05-02 Tom Tromey <tromey@adacore.com>
+
+ Fix Ada catchpoint regression
+ The breakpoint C++-ification series introduced a regression for Ada
+ catchpoints. Specifically, commit 2b5ab5b8 ("Convert base breakpoints
+ to vtable ops") caused these to start failing. I didn't notice this
+ because testing Ada using a Linux distro compiler requires installing
+ the GNAT debuginfo, which I hadn't done.
+
+ This patch fixes the problem. I'm checking it in.
+
+2022-05-02 GDB Administrator <gdbadmin@sourceware.org>
+
+ Automatic date update in version.in
+
+2022-05-01 Tom de Vries <tdevries@suse.de>
+
+ [gdb/testsuite] Fix gdb.multi/attach-no-multi-process.exp with check-readmore
+ When running test-case gdb.multi/attach-no-multi-process.exp with
+ check-readmore, I get:
+ ...
+ (gdb) attach 13411^M
+ Attaching to Remote target^M
+ No unwaited-for children left.^M
+ (gdb) Reading symbols from attach-no-multi-process...^M
+ Reading symbols from /lib64/libm.so.6...^M
+ (No debugging symbols found in /lib64/libm.so.6)^M
+ Reading symbols from /lib64/libc.so.6...^M
+ (No debugging symbols found in /lib64/libc.so.6)^M
+ Reading symbols from /lib64/ld-linux-x86-64.so.2...^M
+ (No debugging symbols found in /lib64/ld-linux-x86-64.so.2)^M
+ 0x00007f5df1fffc8a in clock_nanosleep@GLIBC_2.2.5 () from /lib64/libc.so.6^M
+ FAIL: gdb.multi/attach-no-multi-process.exp: target_non_stop=off: \
+ attach to the program via remote (timeout)
+ ...
+
+ The problem is that the attach output is matched using gdb_test, which uses
+ the '$gdb_prompt $' regexp, and this does not handle the case that '(gdb) ' is
+ not the last available output.
+
+ Fix this by using a gdb_test_multiple instead with a '$gdb_prompt ' regexp, so
+ without the '$' anchor.
+
+ Tested on x86_64-linux with native, check-read1 and check-readmore.
+
+2022-05-01 GDB Administrator <gdbadmin@sourceware.org>
+
+ Automatic date update in version.in
+
+2022-04-30 Thomas Hebb <tommyhebb@gmail.com>
+
+ opcodes: don't assume ELF in riscv, csky, rl78, mep disassemblers
+ Currently, the get_disassembler() implementations for riscv, csky, and
+ rl78--and mep_print_insn() for mep--access ELF variants of union fields
+ without first checking that the bfd actually represents an ELF. This
+ causes undefined behavior and crashes when disassembling non-ELF files
+ (the "binary" BFD, for example). Fix that.
+
+2022-04-30 GDB Administrator <gdbadmin@sourceware.org>
+
+ Automatic date update in version.in
+
+2022-04-29 Tom Tromey <tom@tromey.com>
+
+ Remove create_breakpoints_sal_default
+ create_breakpoints_sal_default is just a simple wrapper, so remove it.
+
+ Remove allocate_bp_location
+ allocate_bp_location is just a small wrapper for a method call, so
+ inline it everywhere.
+
+ Constify breakpoint_ops
+ Now that all breakpoint_ops are statically initialized, they can all
+ be made const.
+
+ Remove breakpoint ops initialization
+ initialize_breakpoint_ops does not do much any more, so remove it in
+ favor of statically-initialize objects.
+
+ Remove vtable_breakpoint_ops
+ There's no need to have vtable_breakpoint_ops any more, so remove it
+ in favor of base_breakpoint_ops.
+
+ Remove most fields from breakpoint_ops
+ At this point, all implementations of breakpoints use the vtable. So,
+ we can now remove most function pointers from breakpoint_ops and
+ switch to using methods directly in the callers. Only the two "static
+ virtual" methods remain in breakpoint_ops.
+
+ Remove breakpoint_ops from init_catchpoint
+ init_catchpoint is only ever passed a single breakpoint_ops pointer,
+ so remove the parameter.
+
+ Remove breakpoint_ops from init_ada_exception_breakpoint
+ init_ada_exception_breakpoint is only ever passed a single
+ breakpoint_ops structure, so remove the parameter.
+
+2022-04-29 Tom Tromey <tom@tromey.com>
+
+ Merge probe and ordinary tracepoints
+ Right now, probe tracepoints are handled by a separate ops object.
+ However, they differ only in a small way from ordinary tracepoints,
+ and furthermore can be distinguished by their event location.
+
+ This patch merges the two cases, just as was done for breakpoints.
+
+2022-04-29 Tom Tromey <tom@tromey.com>
+
+ Merge probe and ordinary breakpoints
+ Right now, probe breakpoints are handled by a separate ops object.
+ However, they differ only in a small way from ordinary breakpoints,
+ and furthermore can be distinguished by their "probe" object.
+
+ This patch merges the two cases. This avoids having to introduce a
+ new bp_ constant (which can be quite subtle to do correctly) and a new
+ subclass.
+
+2022-04-29 Tom Tromey <tom@tromey.com>
+
+ Remove bkpt_base_breakpoint_ops
+ An earlier patch removed the last use of bkpt_base_breakpoint_ops, so
+ remove the object entirely.
+
+ Convert static marker tracepoints to vtable ops
+ This converts static marker tracepoints to use vtable_breakpoint_ops.
+
+ Add bp_static_marker_tracepoint
+ Because the actual construction of a breakpoint is buried deep in
+ create_breakpoint, at present it's necessary to have a new bp_
+ enumerator constant any time a new subclass is needed. Static marker
+ tracepoints are one such case, so this patch introduces
+ bp_static_marker_tracepoint and updates various spots to recognize it.
+
+ Convert ranged breakpoints to vtable ops
+ This converts ranged breakpoints to use vtable_breakpoint_ops. This
+ requires introducing a new ranged_breakpoint type, but this is
+ relatively simple because ranged breakpoints can only be created by
+ break_range_command.
+
+ Convert dprintf to vtable ops
+ This converts dprintf to use vtable_breakpoint_ops.
+
+ Convert Ada catchpoints to vtable ops
+ This converts Ada catchpoints to use vtable_breakpoint_ops.
+
+ Convert ordinary breakpoints to vtable ops
+ This converts "ordinary" breakpoint to use vtable_breakpoint_ops.
+ Recall that an ordinary breakpoint is both the kind normally created
+ by users, and also a base class used by other classes.
+
+ Change inheritance of dprintf
+ The dprintf breakpoint ops is mostly a copy of bpkt_breakpoint_ops,
+ except it's written out explicitly -- and, importantly, there's
+ nothing that bpkt_breakpoint_ops overrides that dprintf does not.
+ This changes dprintf to simply inherit directly, and updates struct
+ dprintf_breakpoint to reflect the change as well.
+
+ Convert momentary breakpoints to vtable ops
+ This converts momentary breakpoints to use vtable_breakpoint_ops.
+
+ Convert internal breakpoints to vtable ops
+ This converts internal breakpoints to use vtable_breakpoint_ops.
+
+ Convert break-catch-throw to vtable ops
+ This converts break-catch-throw.c to use vtable_breakpoint_ops.
+
+ Convert base breakpoints to vtable ops
+ This converts base breakpoints to use vtable_breakpoint_ops.
+
+2022-04-29 Tom Tromey <tom@tromey.com>
+
+ Add some new subclasses of breakpoint
+ This adds a few new subclasses of breakpoint. The inheritance
+ hierarchy is chosen to reflect what's already present in
+ initialize_breakpoint_ops -- it mirrors the way that the _ops
+ structures are filled in.
+
+ This patch also changes new_breakpoint_from_type to create the correct
+ sublcass based on bptype. This is important due to the somewhat
+ inverted way in which create_breakpoint works; and in particular later
+ patches will change some of these entries.
+
+2022-04-29 Tom Tromey <tom@tromey.com>
+
+ Convert tracepoints to vtable ops
+ This converts tracepoints to use vtable_breakpoint_ops.
+
+ Convert watchpoints to vtable ops
+ This converts watchpoints and masked watchpoints. to use
+ vtable_breakpoint_ops. For masked watchpoints, a new subclass must be
+ introduced, and watch_command_1 is changed to create one.
+
+ Convert break-catch-load to vtable ops
+ This converts break-catch-load.c to use vtable_breakpoint_ops.
+
+ Convert break-catch-fork to vtable ops
+ This converts break-catch-fork.c to use vtable_breakpoint_ops.
+
+ Convert break-catch-exec to vtable ops
+ This converts break-catch-exec.c to use vtable_breakpoint_ops.
+
+ Convert break-catch-syscall to vtable ops
+ This converts break-catch-syscall.c to use vtable_breakpoint_ops.
+
+ Convert break-catch-sig to use vtable ops
+ This converts break-catch-sig.c to use vtable_breakpoint_ops.
+
+2022-04-29 Tom Tromey <tom@tromey.com>
+
+ Add a vtable-based breakpoint ops
+ This adds methods to struct breakpoint. Each method has a similar
+ signature to a corresponding function in breakpoint_ops, with the
+ exceptions of create_sals_from_location and create_breakpoints_sal,
+ which can't be virtual methods on breakpoint -- they are only used
+ during the construction of breakpoints.
+
+ Then, this adds a new vtable_breakpoint_ops structure and populates it
+ with functions that simply forward a call from breakpoint_ops to the
+ corresponding virtual method. These are all done with lambdas,
+ because they are just a stepping stone -- by the end of the series,
+ this structure will be deleted.
+
+2022-04-29 Tom Tromey <tom@tromey.com>
+
+ Return bool from breakpoint_ops::print_one
+ This changes breakpoint_ops::print_one to return bool, and updates all
+ the implementations and the caller. The caller is changed so that a
+ NULL check is no longer needed -- something that will be impossible
+ with a real method.
+
+ Delete some unnecessary wrapper functions
+ This patch deletes a few unnecessary wrapper functions from
+ breakpoint.c.
+
+ Add an assertion to clone_momentary_breakpoint
+ This adds an assertion to clone_momentary_breakpoint. This will
+ eventually be removed, but in the meantime is is useful for helping
+ convince oneself that momentary breakpoints will always use
+ momentary_breakpoint_ops. This understanding will help when cleaning
+ up the code later.
+
+ Boolify print_solib_event
+ Change print_solib_event to accept a bool parameter and update the
+ callers.
+
+ Move "catch load" to a new file
+ The "catch load" code is reasonably self-contained, and so this patch
+ moves it out of breakpoint.c and into a new file, break-catch-load.c.
+ One function from breakpoint.c, print_solib_event, now has to be
+ exposed, but this seems pretty reasonable.
+
+2022-04-29 Vladimir Mezentsev <vladimir.mezentsev@oracle.com>
+
+ gprofng: assertion in gprofng/src/Expression.cc:139
+ gprofng/ChangeLog
+ 2022-04-28 Vladimir Mezentsev <vladimir.mezentsev@oracle.com>
+
+ PR gprofng/29102
+ * src/Expression.h: Remove fixupValues.
+ * src/Expression.cc (Expression::copy): Fix a bug.
+
+2022-04-29 Tom Tromey <tromey@adacore.com>
+
+ De-duplicate .gdb_index
+ This de-duplicates variables and types in .gdb_index, making the new
+ index closer to what gdb generated before the new DWARF scanner
+ series. Spot-checking the resulting index for gdb itself, it seems
+ that the new scanner picks up some extra symbols not detected by the
+ old one. I tested both the new and old versions of gdb on both new
+ and old versions of the index, and startup time in all cases is
+ roughly the same (it's worth noting that, for gdb itself, the index no
+ longer provides any benefit over the DWARF scanner). So, I think this
+ fixes the size issue with the new index writer.
+
+ Regression tested on x86-64 Fedora 34.
+
+2022-04-29 Tom Tromey <tromey@adacore.com>
+
+ Fix .debug_names regression with new indexer
+ At AdaCore, we run the internal gdb test suite in several modes,
+ including one using the .debug_names index. This caught a regression
+ caused by the new DWARF indexer.
+
+ First, the psymtabs-based .debug_names generator was completely wrong.
+ However, to avoid making the rewrite series even bigger (fixing the
+ writer will also require rewriting the .debug_names reader), it
+ attempted to preserve the weirdness.
+
+ However, this was not done properly. For example the old writer did
+ this:
+
+ - case STRUCT_DOMAIN:
+ - return DW_TAG_structure_type;
+
+ The new code, instead, simply preserves the actual DWARF tag -- but
+ this makes future lookups fail, because the .debug_names reader only
+ looks for DW_TAG_structure_type.
+
+ This patch attempts to revert to the old behavior in the writer.
+
+2022-04-29 Simon Marchi <simon.marchi@polymtl.ca>
+
+ gdb/infrun: make fetch_inferior_event restore thread if exited or signalled
+ Commit 152a1749566 ("gdb: prune inferiors at end of
+ fetch_inferior_event, fix intermittent failure of
+ gdb.threads/fork-plus-threads.exp") introduced some follow-fork-related
+ test failures, such as:
+
+ info inferiors^M
+ Num Description Connection Executable ^M
+ * 1 process 634972 1 (native) /home/simark/build/binutils-gdb-one-target/gdb/testsuite/outputs/gdb.base/foll-fork/foll-fork ^M
+ 2 process 634975 1 (native) /home/simark/build/binutils-gdb-one-target/gdb/testsuite/outputs/gdb.base/foll-fork/foll-fork ^M
+ (gdb) PASS: gdb.base/foll-fork.exp: follow-fork-mode=parent: detach-on-fork=off: cmd=next 2: test_follow_fork: info inferiors
+ inferior 2^M
+ [Switching to inferior 2 [process 634975] (/home/simark/build/binutils-gdb-one-target/gdb/testsuite/outputs/gdb.base/foll-fork/foll-fork)]^M
+ [Switching to thread 2.1 (Thread 0x7ffff7c9a740 (LWP 634975))]^M
+ #0 0x00007ffff7d7abf7 in _Fork () from /usr/lib/libc.so.6^M
+ (gdb) PASS: gdb.base/foll-fork.exp: follow-fork-mode=parent: detach-on-fork=off: cmd=next 2: test_follow_fork: inferior 2
+ continue^M
+ Continuing.^M
+ [Inferior 2 (process 634975) exited normally]^M
+ [Switching to Thread 0x7ffff7c9a740 (LWP 634972)]^M
+ (gdb) PASS: gdb.base/foll-fork.exp: follow-fork-mode=parent: detach-on-fork=off: cmd=next 2: test_follow_fork: continue until exit at continue unfollowed inferior to end
+ break callee^M
+ Breakpoint 2 at 0x555555555160: file /home/simark/src/binutils-gdb/gdb/testsuite/gdb.base/foll-fork.c, line 9.^M
+ (gdb) FAIL: gdb.base/foll-fork.exp: follow-fork-mode=parent: detach-on-fork=off: cmd=next 2: test_follow_fork: break callee
+
+ What happens here is:
+
+ - inferior 2 is selected
+ - we continue, leading to inferior 2's exit
+ - we set breakpoint, expect 2 locations, but only one location is
+ resolved
+
+ Reading between the lines, we understand that inferior 2 got pruned,
+ when it shouldn't have been.
+
+ The issue can be reproduced by hand with:
+
+ $ ./gdb -q --data-directory=data-directory testsuite/outputs/gdb.base/foll-fork/foll-fork -ex "set detach-on-fork off" -ex start -ex "next 2" -ex "inferior 2" -ex "set debug infrun"
+ ...
+ Temporary breakpoint 1, main () at /home/simark/src/binutils-gdb/gdb/testsuite/gdb.base/foll-fork.c:14
+ 14 int v = 5;
+ [New inferior 2 (process 637627)]
+ [Thread debugging using libthread_db enabled]
+ Using host libthread_db library "/usr/lib/../lib/libthread_db.so.1".
+ 17 if (pid == 0) /* set breakpoint here */
+ [Switching to inferior 2 [process 637627] (/home/simark/build/binutils-gdb-one-target/gdb/testsuite/outputs/gdb.base/foll-fork/foll-fork)]
+ [Switching to thread 2.1 (Thread 0x7ffff7c9a740 (LWP 637627))]
+ #0 0x00007ffff7d7abf7 in _Fork () from /usr/lib/libc.so.6
+ (gdb) continue
+ Continuing.
+ [infrun] clear_proceed_status_thread: 637627.637627.0
+ [infrun] proceed: enter
+ [infrun] proceed: addr=0xffffffffffffffff, signal=GDB_SIGNAL_DEFAULT
+ [infrun] scoped_disable_commit_resumed: reason=proceeding
+ [infrun] start_step_over: enter
+ [infrun] start_step_over: stealing global queue of threads to step, length = 0
+ [infrun] operator(): step-over queue now empty
+ [infrun] start_step_over: exit
+ [infrun] proceed: start: resuming threads, all-stop-on-top-of-non-stop
+ [infrun] proceed: resuming 637627.637627.0
+ [infrun] resume_1: step=0, signal=GDB_SIGNAL_0, trap_expected=0, current thread [637627.637627.0] at 0x7ffff7d7abf7
+ [infrun] do_target_resume: resume_ptid=637627.637627.0, step=0, sig=GDB_SIGNAL_0
+ [infrun] infrun_async: enable=1
+ [infrun] prepare_to_wait: prepare_to_wait
+ [infrun] proceed: end: resuming threads, all-stop-on-top-of-non-stop
+ [infrun] reset: reason=proceeding
+ [infrun] maybe_set_commit_resumed_all_targets: enabling commit-resumed for target native
+ [infrun] maybe_call_commit_resumed_all_targets: calling commit_resumed for target native
+ [infrun] maybe_call_commit_resumed_all_targets: calling commit_resumed for target native
+ [infrun] proceed: exit
+ [infrun] fetch_inferior_event: enter
+ [infrun] scoped_disable_commit_resumed: reason=handling event
+ [infrun] do_target_wait: Found 2 inferiors, starting at #1
+ [infrun] random_pending_event_thread: None found.
+ [infrun] print_target_wait_results: target_wait (-1.0.0 [process -1], status) =
+ [infrun] print_target_wait_results: 637627.637627.0 [process 637627],
+ [infrun] print_target_wait_results: status->kind = EXITED, exit_status = 0
+ [infrun] handle_inferior_event: status->kind = EXITED, exit_status = 0
+ [Inferior 2 (process 637627) exited normally]
+ [infrun] stop_waiting: stop_waiting
+ [infrun] stop_all_threads: start: reason=presenting stop to user in all-stop, inf=-1
+ [infrun] stop_all_threads: pass=0, iterations=0
+ [infrun] stop_all_threads: 637624.637624.0 not executing
+ [infrun] stop_all_threads: pass=1, iterations=1
+ [infrun] stop_all_threads: 637624.637624.0 not executing
+ [infrun] stop_all_threads: done
+ [infrun] stop_all_threads: end: reason=presenting stop to user in all-stop, inf=-1
+ [Switching to Thread 0x7ffff7c9a740 (LWP 637624)]
+ [infrun] infrun_async: enable=0
+ [infrun] reset: reason=handling event
+ [infrun] maybe_set_commit_resumed_all_targets: not requesting commit-resumed for target native, no resumed threads
+ (gdb) [infrun] fetch_inferior_event: exit
+ (gdb) info inferiors
+ Num Description Connection Executable
+ * 1 process 637624 1 (native) /home/simark/build/binutils-gdb-one-target/gdb/testsuite/outputs/gdb.base/foll-fork/foll-fork
+ (gdb) i th
+ Id Target Id Frame
+ * 1 Thread 0x7ffff7c9a740 (LWP 637624) "foll-fork" main () at /home/simark/src/binutils-gdb/gdb/testsuite/gdb.base/foll-fork.c:17
+
+ After handling the EXITED event for inferior 2, inferior 2 should have
+ stayed the current inferior, which should have prevented it from getting
+ pruned. When debugging, we find that when getting at the
+ prune_inferiors call, the current inferior is inferior 1. Further
+ debugging shows that prior to the call to
+ clean_up_just_stopped_threads_fsms, the current inferior is inferior 2,
+ and after, it's inferior 1. Then, back in fetch_inferior_event, the
+ restore_thread object is disabled, due to:
+
+ /* If we got a TARGET_WAITKIND_NO_RESUMED event, then the
+ previously selected thread is gone. We have two
+ choices - switch to no thread selected, or restore the
+ previously selected thread (now exited). We chose the
+ later, just because that's what GDB used to do. After
+ this, "info threads" says "The current thread <Thread
+ ID 2> has terminated." instead of "No thread
+ selected.". */
+ if (!non_stop
+ && cmd_done
+ && ecs->ws.kind () != TARGET_WAITKIND_NO_RESUMED)
+ restore_thread.dont_restore ();
+
+ So in the end, inferior 1 stays current, and inferior 2 gets wrongfully
+ pruned.
+
+ I'd say clean_up_just_stopped_threads_fsms is the culprit here. It
+ actually attempts to restore the event_thread to be current at the end,
+ after the loop (I presume the current thread on entry is always supposed
+ to be the event thread). But in this case, the event is of kind EXITED,
+ and ecs->event_thread is not set, so the current inferior isn't
+ restored.
+
+ Fix that by using scoped_restore_current_thread. If there is no current
+ thread, scoped_restore_current_thread will still restore the current
+ inferior, and that's what we want.
+
+ Random note: the thread_info object for inferior 2's thread is never
+ freed. It is held (by refcount) by the restore_thread object in
+ fetch_inferior_event, while the inferior's thread list gets cleared, in
+ the exit event processing. When the refcount reaches 0 (when the
+ restore_thread object is destroyed), there's nothing that actually
+ deletes the thread_info object. And I think that nothing in GDB points
+ to it anymore, so it leaks. I don't want to fix that in this patch, but
+ thought it would be good to mention it, in case somebody has an idea for
+ how to fix that.
+
+ Change-Id: Ibc7df543e2c46aad5f3b9250b28c3fb5912be4e8
+
+2022-04-29 Pedro Alves <pedro@palves.net>
+
+ Slightly tweak and clarify target_resume's interface
+ The current target_resume interface is a bit odd & non-intuitive.
+ I've found myself explaining it a couple times the recent past, while
+ reviewing patches that assumed STEP/SIGNAL always applied to the
+ passed in PTID. It goes like this today:
+
+ - if the passed in PTID is a thread, then the step/signal request is
+ for that thread.
+
+ - otherwise, if PTID is a wildcard (all threads or all threads of
+ process), the step/signal request is for inferior_ptid, and PTID
+ indicates which set of threads run free.
+
+ Because GDB always switches the current thread to "leader" thread
+ being resumed/stepped/signalled, we can simplify this a bit to:
+
+ - step/signal are always for inferior_ptid.
+
+ - PTID indicates the set of threads that run free.
+
+ Still not ideal, but it's a minimal change and at least there are no
+ special cases this way.
+
+ That's what this patch does. It renames the PTID parameter to
+ SCOPE_PTID, adds some assertions to target_resume, and tweaks
+ target_resume's description. In addition, it also renames PTID to
+ SCOPE_PTID in the remote and linux-nat targets, and simplifies their
+ implementation a little bit. Other targets could do the same, but
+ they don't have to.
+
+ Change-Id: I02a2ec2ab3a3e9b191de1e9a84f55c17cab7daaf
+
+2022-04-29 GDB Administrator <gdbadmin@sourceware.org>
+
+ Automatic date update in version.in
+
+2022-04-28 Tom Tromey <tromey@adacore.com>
+
+ Fix libinproctrace.so build on PPC
+ The recent gnulib import caused a build failure of libinproctrace.so
+ on PPC:
+
+ alloc.c:(.text+0x20): undefined reference to `rpl_malloc'
+ alloc.c:(.text+0x70): undefined reference to `rpl_realloc'
+
+ This patch fixes the problem using the same workaround that was
+ previously used for free.
+
+2022-04-28 H.J. Lu <hjl.tools@gmail.com>
+
+ x86: Properly handle function pointer reference
+ Update
+
+ commit ebb191adac4ab45498dec0bfaac62f0a33537ba4
+ Author: H.J. Lu <hjl.tools@gmail.com>
+ Date: Wed Feb 9 15:51:22 2022 -0800
+
+ x86: Disallow invalid relocation against protected symbol
+
+ to allow function pointer reference and make sure that PLT entry isn't
+ used for function reference due to function pointer reference.
+
+ bfd/
+
+ PR ld/29087
+ * elf32-i386.c (elf_i386_scan_relocs): Don't set
+ pointer_equality_needed nor check non-canonical reference for
+ function pointer reference.
+ * elf64-x86-64.c (elf_x86_64_scan_relocs): Likewise.
+
+ ld/
+
+ PR ld/29087
+ * testsuite/ld-x86-64/x86-64.exp: Run PR ld/29087 tests.
+ * testsuite/ld-x86-64/protected-func-3.c: New file.
+
+2022-04-28 Tom Tromey <tom@tromey.com>
+
+ Check OBJF_NOT_FILENAME in DWARF index code
+ The DWARF index code currently uses 'stat' to see if an objfile
+ represents a real file. However, I think it's more correct to check
+ OBJF_NOT_FILENAME instead.
+
+ Regression tested on x86-64 Fedora 34.
+
+2022-04-28 Tom Tromey <tromey@adacore.com>
+
+ Remove "typedef enum ..."
+ I noticed a few spots in GDB that use "typedef enum". However, in C++
+ this isn't as useful, as the tag is automatically entered as a
+ typedef. This patch removes most uses of "typedef enum" -- the
+ exceptions being in some nat-* code I can't compile, and
+ glibc_thread_db.h, which I think is more or less a copy of some C code
+ from elsewhere.
+
+ Tested by rebuilding.
+
+2022-04-28 Andrew Burgess <aburgess@redhat.com>
+
+ gdb: fix nullptr dereference in block::ranges()
+ This commit:
+
+ commit f5cb8afdd297dd68273d98a10fbfd350dff918d8
+ Date: Sun Feb 6 22:27:53 2022 -0500
+
+ gdb: remove BLOCK_RANGES macro
+
+ introduces a potential nullptr dereference in block::ranges, this is
+ breaking most tests, e.g. gdb.base/break.exp is failing for me.
+
+ In the above patch BLOCK_CONTIGUOUS_P is changed from this:
+
+ #define BLOCK_CONTIGUOUS_P(bl) (BLOCK_RANGES (bl) == nullptr \
+ || BLOCK_NRANGES (bl) <= 1)
+
+ to this:
+
+ #define BLOCK_CONTIGUOUS_P(bl) ((bl)->ranges ().size () == 0 \
+ || (bl)->ranges ().size () == 1)
+
+ So, before the commit we checked for the block ranges being nullptr,
+ but afterwards we just call block::ranges() in all cases.
+
+ The problem is that block::ranges() looks like this:
+
+ /* Return a view on this block's ranges. */
+ gdb::array_view<blockrange> ranges ()
+ { return gdb::make_array_view (m_ranges->range, m_ranges->nranges); }
+
+ where m_ranges is:
+
+ struct blockranges *m_ranges;
+
+ And so, we see that the nullptr check has been lost, and we might end
+ up dereferencing a nullptr.
+
+ My proposed fix is to move the nullptr check into block::ranges, and
+ return an explicit empty array_view if m_ranges is nullptr.
+
+ After this, everything seems fine again.
+
+2022-04-28 Stefan Liebler <stli@linux.ibm.com>
+
+ s390: Add DT_JMPREL pointing to .rela.[i]plt with static-pie
+ In static-pie case, there are IRELATIVE-relocs in
+ .rela.iplt (htab->irelplt), which will later be grouped
+ to .rela.plt. On s390, the IRELATIVE relocations are
+ always located in .rela.iplt - even for non-static case.
+ Ensure that DT_JMPREL, DT_PLTRELA, DT_PLTRELASZ is added
+ to the dynamic section even if htab->srelplt->size == 0.
+ See _bfd_elf_add_dynamic_tags in bfd/elflink.c.
+
+ bfd/
+ elf64-s390.c (elf_s390_size_dynamic_sections):
+ Enforce DT_JMPREL via htab->elf.dt_jmprel_required.
+
+2022-04-28 Stefan Liebler <stli@linux.ibm.com>
+
+ s390: Avoid dynamic TLS relocs in PIE
+ No dynamic relocs are needed for TLS defined in an executable, the
+ TP relative offset is known at link time.
+
+ Fixes
+ FAIL: Build pr22263-1
+
+ bfd/
+ PR ld/22263
+ * elf64-s390.c (elf_s390_tls_transition): Use bfd_link_dll
+ instead of bfd_link_pic for TLS.
+ (elf_s390_check_relocs): Likewise.
+ (allocate_dynrelocs): Likewise.
+ (elf_s390_relocate_section): Likewise.
+
+2022-04-28 Nick Alcock <nick.alcock@oracle.com>
+
+ libctf: impose an ordering on conflicting types
+ When two types conflict and they are not types which can have forwards
+ (say, two arrays of different sizes with the same name in two different
+ TUs) the CTF deduplicator uses a popularity contest to decide what to
+ do: the type cited by the most other types ends up put into the shared
+ dict, while the others are relegated to per-CU child dicts.
+
+ This works well as long as one type *is* most popular -- but what if
+ there is a tie? If several types have the same popularity count,
+ we end up picking the first we run across and promoting it, and
+ unfortunately since we are working over a dynhash in essentially
+ arbitrary order, this means we promote a random one. So multiple
+ runs of ld with the same inputs can produce different outputs!
+ All the outputs are valid, but this is still undesirable.
+
+ Adjust things to use the same strategy used to sort types on the output:
+ when there is a tie, always put the type that appears in a CU that
+ appeared earlier on the link line (and if there is somehow still a tie,
+ which should be impossible, pick the type with the lowest type ID).
+
+ Add a testcase -- and since this emerged when trying out extern arrays,
+ check that those work as well (this requires a newer GCC, but since all
+ GCCs that can emit CTF at all are unreleased this is probably OK as
+ well).
+
+ Fix up one testcase that has slight type ordering changes as a result
+ of this change.
+
+ libctf/ChangeLog:
+
+ * ctf-dedup.c (ctf_dedup_detect_name_ambiguity): Use
+ cd_output_first_gid to break ties.
+
+ ld/ChangeLog:
+
+ * testsuite/ld-ctf/array-conflicted-ordering.d: New test, using...
+ * testsuite/ld-ctf/array-char-conflicting-1.c: ... this...
+ * testsuite/ld-ctf/array-char-conflicting-2.c: ... and this.
+ * testsuite/ld-ctf/array-extern.d: New test, using...
+ * testsuite/ld-ctf/array-extern.c: ... this.
+ * testsuite/ld-ctf/conflicting-typedefs.d: Adjust for ordering
+ changes.
+
+2022-04-28 Nick Alcock <nick.alcock@oracle.com>
+
+ libctf: add a comment explaining how to use ctf_*open
+ Specifically, tell users what to pass to those functions that accept raw
+ section content, since it's fairly involved and easy to get wrong.
+ (.dynsym / .dynstr when CTF_F_DYNSTR is set, otherwise .symtab / .strtab).
+
+ include/ChangeLog:
+
+ * ctf-api.h (ctf_*open): Improve comment.
+
+2022-04-28 Vladimir Mezentsev <vladimir.mezentsev@oracle.com>
+
+ gprofng: test suite problems
+ gprofng/ChangeLog
+ 2022-04-27 Vladimir Mezentsev <vladimir.mezentsev@oracle.com>
+
+ PR gprofng/29065
+ * testsuite/lib/Makefile.skel: Search parent dir for libs too.
+
+2022-04-28 Simon Marchi <simon.marchi@polymtl.ca>
+
+ gdb: remove BLOCKVECTOR_MAP macro
+ Replace with equivalent methods.
+
+ Change-Id: I4e56c76dfc363c1447686fb29c4212ea18b4dba0
+
+2022-04-28 Simon Marchi <simon.marchi@polymtl.ca>
+
+ gdb: constify addrmap_find
+ addrmap_find shouldn't need to modify the addrmap, so constify the
+ addrmap parameter. This helps for the following patch, where getting
+ the map of a const blockvector will return a const addrmap.
+
+ Change-Id: If670e425ed013724a3a77aab7961db50366dccb2
+
+2022-04-28 Simon Marchi <simon.marchi@efficios.com>
+
+ gdb: remove BLOCKVECTOR_BLOCK and BLOCKVECTOR_NBLOCKS macros
+ Replace with calls to blockvector::blocks, and the appropriate method
+ call on the returned array_view.
+
+ Change-Id: I04d1f39603e4d4c21c96822421431d9a029d8ddd
+
+2022-04-28 Simon Marchi <simon.marchi@efficios.com>
+
+ gdb: remove BLOCK_ENTRY_PC macro
+ Replace with equivalent method.
+
+ Change-Id: I0e033095e7358799930775e61028b48246971a7d
+
+2022-04-28 Simon Marchi <simon.marchi@efficios.com>
+
+ gdb: remove BLOCK_CONTIGUOUS_P macro
+ Replace with an equivalent method.
+
+ Change-Id: I60fd3be7b4c2601c2a74328f635fa48ed80eb7f5
+
+2022-04-28 Simon Marchi <simon.marchi@efficios.com>
+
+ gdb: remove BLOCK_RANGE macro
+ Replace with access through the block::ranges method.
+
+ Change-Id: I50f3ed433b997c9f354e49bc6583f540ae4b6121
+
+2022-04-28 Simon Marchi <simon.marchi@efficios.com>
+
+ gdb: remove BLOCK_NRANGES macro
+ Replace with range for loops.
+
+ Change-Id: Icbe04f9b6f9e6ddae2e15b2409c61f7a336bc3e3
+
+2022-04-28 Simon Marchi <simon.marchi@efficios.com>
+
+ gdb: remove BLOCK_RANGES macro
+ Replace with an equivalent method on struct block.
+
+ Change-Id: I6dcf13e9464ba8a08ade85c89e7329c300fd6c2a
+
+2022-04-28 Simon Marchi <simon.marchi@efficios.com>
+
+ gdb: remove BLOCK_RANGE_{START,END} macros
+ Replace with equivalent methods on blockrange.
+
+ Change-Id: I20fd8f624e0129782c36768291891e7582d77c74
+
+2022-04-28 Simon Marchi <simon.marchi@efficios.com>
+
+ gdb: remove BLOCK_NAMESPACE macro
+ Replace with equivalent methods.
+
+ Change-Id: If86b8cbdfb0f52e22c929614cd53e73358bab76a
+
+2022-04-28 Simon Marchi <simon.marchi@efficios.com>
+
+ gdb: remove BLOCK_MULTIDICT macro
+ Replace with equivalent methods.
+
+ Change-Id: If9a239c511a664f2a59fecb6d1cd579881b23dc2
+
+2022-04-28 Simon Marchi <simon.marchi@efficios.com>
+
+ gdb: remove BLOCK_SUPERBLOCK macro
+ Replace with equivalent methods.
+
+ Change-Id: I334a319909a50b5cc5570a45c38c70e10dc00630
+
+2022-04-28 Simon Marchi <simon.marchi@efficios.com>
+
+ gdb: remove BLOCK_FUNCTION macro
+ Replace with equivalent methods.
+
+ Change-Id: I31ec00f5bf85335c8b23d306ca0fe0b84d489101
+
+2022-04-28 Simon Marchi <simon.marchi@efficios.com>
+
+ gdb: remove BLOCK_{START,END} macros
+ Replace with equivalent methods.
+
+ Change-Id: I10a6c8a2a86462d9d4a6a6409a3f07a6bea66310
+
+2022-04-28 GDB Administrator <gdbadmin@sourceware.org>
+
+ Automatic date update in version.in
+
+2022-04-27 H.J. Lu <hjl.tools@gmail.com>
+
+ x86: Disable 2 tests with large memory requirement
+ gas/
+
+ * testsuite/gas/i386/i386.exp: Disable rept.
+
+ ld/
+
+ * testsuite/ld-x86-64/x86-64.exp: Disable pr17618.
+
+2022-04-27 Pedro Alves <pedro@palves.net>
+
+ Make gdb.base/parse_number.exp test all architectures
+ There are some subtle differences between architectures, like the size
+ of a "long" type, and this isn't currently accounted for in
+ gdb.base/parse_number.exp.
+
+ For example, on aarch64 a long type is 8 bytes, whereas a long type is
+ 4 bytes for x86_64. This causes the following FAIL's:
+
+ FAIL: gdb.base/parse_number.exp: lang=asm: ptype 0xffffffffffffffff
+ FAIL: gdb.base/parse_number.exp: lang=auto: ptype 0xffffffffffffffff
+ FAIL: gdb.base/parse_number.exp: lang=c: ptype 0xffffffffffffffff
+ FAIL: gdb.base/parse_number.exp: lang=c++: ptype 0xffffffffffffffff
+ FAIL: gdb.base/parse_number.exp: lang=fortran: p/x 0xffffffffffffffff
+ FAIL: gdb.base/parse_number.exp: lang=fortran: ptype 0xffffffffffffffff
+ FAIL: gdb.base/parse_number.exp: lang=go: ptype 0xffffffffffffffff
+ FAIL: gdb.base/parse_number.exp: lang=local: ptype 0xffffffffffffffff
+ FAIL: gdb.base/parse_number.exp: lang=minimal: ptype 0xffffffffffffffff
+ FAIL: gdb.base/parse_number.exp: lang=objective-c: ptype 0xffffffffffffffff
+ FAIL: gdb.base/parse_number.exp: lang=opencl: ptype 0xffffffffffffffff
+ FAIL: gdb.base/parse_number.exp: lang=pascal: ptype 0xffffffffffffffff
+
+ There are some fortran-specific divergences as well, where 32-bit
+ architectures show "unsigned int" for both 32-bit and 64-bit integers
+ and 64-bit architectures show "unsigned int" and "unsigned long" for
+ 32-bit and 64-bit integers.
+
+ There might be a bug that 32-bit fortran truncates 64-bit values to
+ 32-bit, given "p/x 0xffffffffffffffff" returns "0xffffffff".
+
+ Here's what we get for aarch64:
+
+ (gdb) ptype 0xffffffff
+ type = unsigned int
+ (gdb) ptype 0xffffffffffffffff
+ type = unsigned long
+ (gdb) p sizeof (0xffffffff)
+ $1 = 4
+ (gdb) p sizeof (0xffffffffffffffff)
+ quit
+ $2 = 8
+ (gdb) ptype 0xffffffff
+ type = unsigned int
+ (gdb) ptype 0xffffffffffffffff
+ type = unsigned long
+
+ And for arm:
+
+ (gdb) ptype 0xffffffff
+ type = unsigned int
+ (gdb) ptype 0xffffffffffffffff
+ quit
+ type = unsigned long long
+ (gdb) p sizeof (0xffffffff)
+ quit
+ $1 = 4
+ (gdb) p sizeof (0xffffffffffffffff)
+ quit
+ $2 = 8
+ (gdb) ptype 0xffffffff
+ type = unsigned int
+ (gdb) ptype 0xffffffffffffffff
+ type = unsigned long
+
+ This patch...
+
+ * Makes the testcase iterate over all architectures, thus covering all
+ the different combinations of types/sizes every time.
+
+ * Adjusts the expected values and types based on the sizes of long
+ long, long and int.
+
+ A particularly curious architecture is s12z, which has 32-bit long
+ long, and thus no way to represent 64-bit integers in C-like
+ languages.
+
+ Co-Authored-By: Luis Machado <luis.machado@arm.com>
+ Change-Id: Ifc0ccd33e7fd3c7585112ff6bebe7d266136768b
+
+2022-04-27 Tom Tromey <tromey@adacore.com>
+
+ Fix gdbserver build for x86-64 Windows
+ I broke the gdbserver build on x86-64 Windows a little while back.
+ Previously, I could not build this configuration, but today I found
+ out that if I configure with:
+
+ --host=x86_64-w64-mingw32 --target=x86_64-w64-mingw32
+
+ using the Fedora 34 tools, it will in fact build. I'm not certain,
+ but maybe the gnulib update helped with this.
+
+ This patch fixes the build. I'm checking it in.
+
+2022-04-27 John Baldwin <jhb@FreeBSD.org>
+
+ Create pseudo sections for NT_ARM_TLS notes on FreeBSD.
+ bfd/ChangeLog:
+
+ * elf.c (elfcore_grok_freebsd_note): Handle NT_ARM_TLS notes.
+
+2022-04-27 Christophe Lyon <christophe.lyon@arm.com>
+
+ gdb/arm: Extend arm_m_addr_is_magic to support FNC_RETURN, add unwind-secure-frames command
+ This patch makes use of the support for several stack pointers
+ introduced by the previous patch to switch between them as needed
+ during unwinding.
+
+ It introduces a new 'unwind-secure-frames' arm command to enable/disable
+ mode switching during unwinding. It is enabled by default.
+
+ It has been tested using an STM32L5 board (with cortex-m33) and the
+ sample applications shipped with the STM32Cube development
+ environment: GTZC_TZSC_MPCBB_TrustZone in
+ STM32CubeL5/Projects/NUCLEO-L552ZE-Q/Examples/GTZC.
+
+ The test consisted in setting breakpoints in various places and check
+ that the backtrace is correct: SecureFault_Callback (Non-secure mode),
+ __gnu_cmse_nonsecure_call (before and after the vpush instruction),
+ SecureFault_Handler (Secure mode).
+
+ This implies that we tested only some parts of this patch (only MSP*
+ were used), but remaining parts seem reasonable.
+
+2022-04-27 Christophe Lyon <christophe.lyon@arm.com>
+
+ gdb/arm: Add support for multiple stack pointers on Cortex-M
+ Armv8-M architecture with Security extension features four stack pointers
+ to handle Secure and Non-secure modes.
+
+ This patch adds support to switch between them as needed during
+ unwinding, and replaces all updates of cache->prev_sp with calls to
+ arm_cache_set_prev_sp.
+
+2022-04-27 Christophe Lyon <christophe.lyon@arm.com>
+
+ gdb/arm: Introduce arm_cache_init
+ This patch is a preparation for the rest of the series and adds two
+ arm_cache_init helper functions. It updates every place that updates
+ cache->saved_regs to call the helper instead.
+
+ gdb/arm: Define MSP and PSP registers for M-Profile
+ This patch removes the hardcoded access to PSP in
+ arm_m_exception_cache() and relies on the definition with the XML
+ descriptions.
+
+2022-04-27 Christophe Lyon <christophe.lyon@arm.com>
+
+ gdb/arm: Fix prologue analysis to support vpush
+ While working on adding support for Non-secure/Secure modes unwinding,
+ I noticed that the prologue analysis lacked support for vpush, which
+ is used for instance in the CMSE stub routine.
+
+ This patch updates thumb_analyze_prologue accordingly, adding support
+ for vpush of D-registers.
+
+2022-04-27 Enze Li <lienze2010@hotmail.com>
+
+ gdb/testsuite: fix FAIL in gdb.base/clear_non_user_bp.exp
+ Tom and Simon feedback that there is a test failing in this commit:
+
+ commit a5c69b1e49bae4d0dcb20f324cebb310c63495c6
+ Date: Sun Apr 17 15:09:46 2022 +0800
+
+ gdb: fix using clear command to delete non-user breakpoints(PR cli/7161)
+
+ Then, I reproduced the same fail with Ubuntu 20.04 as Simon said, and I
+ fixed the nit in this patch. The root of the problem is not correctly
+ matching the presentation of internal breakpoints.
+
+ In addition, as Pedro pointed out, the original testcase is not portable
+ in some methods, so this patch fixes this issue and some other
+ improvements.
+
+ Tested on x86_64 ubuntu 20.04.4 and openSUSE Tumbleweed(VERSION_ID="20220425").
+
+2022-04-27 Jan Beulich <jbeulich@suse.com>
+
+ x86: VFPCLASSSH is Evex.LLIG
+ This also was mistakenly flagged as Evex.128.
+
+2022-04-27 Nick Clifton <nickc@redhat.com>
+
+ Fix potential buffer overruns when creating DLLs.
+ PR 29006
+ * pe-dll.c (make_head): Use asprintf to allocate and populate a
+ buffer containing the temporary name.
+ (make_tail, make_one, make_singleton_name_thunk): Likewise.
+ (make_import_fixup_mark, make_import_fixup_entry): Likewise.
+ (make_runtime_pseudo_reloc): Likewise.
+ (pe_create_runtime_relocator_reference): Likewise.
+
+2022-04-27 Alan Modra <amodra@gmail.com>
+
+ Revert pr29072 lto test changes
+ Revert commit 65daf5bed6 testsuite changes in ld-plugin/. -z isn't
+ supported for non-ELF targets, and isn't needed since we now prune the
+ exec stack warning (commit 333cd559ba).
+
+ PR 29072
+
+2022-04-27 Simon Marchi <simon.marchi@polymtl.ca>
+
+ gdb/testsuite: use with_cwd where possible
+ I learned about with_cwd today. I spotted a few spots that could use
+ it, to make the code more robust.
+
+ Change-Id: Ia23664cb827f25e79d31948e0c006a8dc61c33e1
+
+2022-04-27 GDB Administrator <gdbadmin@sourceware.org>
+
+ Automatic date update in version.in
+
+2022-04-26 Carl Love <cel@us.ibm.com>
+
+ GDB PowerPC record test cases for ISA 2.06 and ISA 3.1
+ This patch adds PowerPC specific tests to verify recording of various
+ instructions. The first test case checks the ISA 2.06 lxvd2x instruction.
+ The second test case tests several of the ISA 3.01 instructions. Specifically,
+ it checks the word and prefixed instructions and some of the Matrix
+ Multiply Assist (MMA) instructions.
+
+ The patch has been run on both Power 10 and Power 9 to verify the ISA
+ 2.06 test case runs on both platforms without errors. The ISA 3.1 test
+ runs without errors on Power 10 and is skipped as expected on Power 9.
+
+2022-04-26 Carl Love <cel@us.ibm.com>
+
+ Add recording support for the ISA 3.1 PowerPC instructions.
+ This patch adds support for the PowerPC ISA 3.1 instructions to the PowerPC
+ gdb instruction recording routines. Case statement entries are added to a
+ number of the existing routines for recording the 32-bit word instructions.
+ A few new functions were added to handle the new word instructions. The 64-bit
+ prefix instructions are all handled by a set of new routines. The function
+ ppc_process_prefix_instruction() is the primary function to handle the
+ prefixed instructions. It calls additional functions to handle specific
+ sets of prefixed instructions. These new functions are:
+ ppc_process_record_prefix_vsx_d_form(),
+ ppc_process_record_prefix_store_vsx_ds_form(),
+ ppc_process_record_prefix_op34(),
+ ppc_process_record_prefix_op33(),
+ ppc_process_record_prefix_op32(),
+ ppc_process_record_prefix_store(),
+ ppc_process_record_prefix_op59_XX3(),
+ ppc_process_record_prefix_op42().
+
+2022-04-26 Tom Tromey <tromey@adacore.com>
+
+ Handle encoding failures in Windows thread names
+ Internally at AdaCore, we noticed that the new Windows thread name
+ code could fail. First, it might return a zero-length string, but in
+ gdb conventions it should return nullptr instead. Second, an encoding
+ failure could wind up showing replacement characters to the user; this
+ is confusing and not useful; it's better to recognize such errors and
+ simply discard the name. This patch makes both of these changes.
+
+2022-04-26 H.J. Lu <hjl.tools@gmail.com>
+
+ i386: Pass -z noexecstack to linker tests
+ PR ld/29072
+ * testsuite/ld-i386/i386.exp: Pass -z noexecstack to gotpc1
+ and property-6.
+
+2022-04-26 John Baldwin <jhb@FreeBSD.org>
+
+ bsd-kvm: Fix build after recent changes to path handling functions.
+ Convert bsd_kvm_corefile and the local filename in bsd_kvm_open to
+ std::string rather than simple char * pointers freed by xfree.
+
+2022-04-26 Simon Marchi <simon.marchi@polymtl.ca>
+
+ gdb: make some random Python files Python 3-compatible
+ I noticed that these files failed to format with Black, because they use
+ print without parenthesis (which isn't Python 3 compatible).
+
+ I don't know if these files are still relevant, but the change is
+ trivial, so here it is.
+
+ Change-Id: I116445c2b463486016f824d32effffc915b60766
+
+2022-04-26 Carl Love <cel@us.ibm.com>
+
+ PowerPC: Update expected floating point output for gdb.arch/altivec-regs.exp and gdb.arch/vsx-regs.exp
+ The format for printing the floating point values was changed by commit:
+
+ commit 56262a931b7ca8ee3ec9104bc7e9e0b40cf3d64e
+ Author: Tom Tromey <tromey@adacore.com>
+ Date: Thu Feb 17 13:43:59 2022 -0700
+
+ Change how "print/x" displays floating-point value
+
+ Currently, "print/x" will display a floating-point value by first
+ casting it to an integer type. This yields weird results like:
+
+ (gdb) print/x 1.5
+ $1 = 0x1
+ ...
+ Bug: https://sourceware.org/bugzilla/show_bug.cgi?id=16242
+
+ The above change results in 417 regression test failures since the expected
+ Power vector register output no longer match.
+
+ This patch updates the expected Altivec floating point register prints to
+ the hexadecimal format for both big endian and little endian systems. The
+ patch also fixes a formatting isue with the decimal_vector expected value
+ assign statements.
+
+ The expected VSX vector_register1, vector_register1_vr, vector_register2,
+ vector_register2_vr variables are updated to include the new float128 entry.
+ Additionally, the comment in the vsx expect file about the initialization
+ of the vs registers is updated.
+
+ The patch has been tested on Power 10, Power 8 LE and Power 8 BE.
+
+2022-04-26 John Baldwin <jhb@FreeBSD.org>
+
+ gdbsupport/pathstuff.h: #include <array> explicitly for std::array<>
+ This fixes build breakage using clang with libc++ on FreeBSD where
+ std::array<> is not yet declared when used by the path_join variadic
+ function template.
+
+2022-04-26 GDB Administrator <gdbadmin@sourceware.org>
+
+ Automatic date update in version.in
+
+2022-04-25 Tom Tromey <tromey@adacore.com>
+
+ Do not put linkage names into .gdb_index
+ This changes the .gdb_index writer to skip linkage names. This was
+ always done historically (though somewhat implicitly).
+
+2022-04-25 Nick Clifton <nickc@redhat.com>
+
+ Emit a note warning the user that creating an executable stack because of a missing .note.GNU-stack section is deprecated.
+ PR 29072
+ bfd * elflink.c (bfd_elf_size_dynamic_sections): Display a note to the
+ user that the current ehaviour of creating an executable stack
+ because of a missing .note.GNU-stack section is deprecated and
+ will be changed in a future release.
+
+ binutils* testsuite/lib/binutils-common.exp (prune_warnings_extra): Filter
+ out notes about the executable stacjk behaviour beign deprecated.
+
+ ld * testsuite/ld-elf/pr29072.b.warn: Update to include the note
+ about the linker's behaviour being depreccated.
+
+2022-04-25 rupothar <rupesh.potharla@amd.com>
+
+ gdb/fortran: Support for assumed rank zero
+ If a variable is passed to function in FORTRAN as an argument the
+ variable is treated as an array with rank zero. GDB currently does
+ not support the case for assumed rank 0. This patch provides support
+ for assumed rank 0 and updates the testcase as well.
+
+ Without patch:
+ Breakpoint 1, arank::sub1 (a=<error reading variable:
+ failed to resolve dynamic array rank>) at assumedrank.f90:11
+ 11 PRINT *, RANK(a)
+ (gdb) p a
+ failed to resolve dynamic array rank
+ (gdb) p rank(a)
+ failed to resolve dynamic array rank
+
+ With patch:
+ Breakpoint 1, arank::sub1 (a=0) at assumedrank.f90:11
+ 11 PRINT *, RANK(a)
+ (gdb) p a
+ $1 = 0
+ (gdb) p rank(a)
+ $2 = 0
+
+2022-04-25 Lancelot SIX <lancelot.six@amd.com>
+
+ gdb/infrun: assert !step_over_info_valid_p in restart_threads
+ While working in gdb/infrun.c:restart_threads, I was wondering what are
+ the preconditions to call the function. It seems to me that
+ !step_over_info_valid_p should be a precondition (i.e. if we are doing
+ an inline step over breakpoint, we do not want to resume non stepping
+ threads as one of them might miss the breakpoint which is temporally
+ disabled).
+
+ To convince myself that this is true, I have added an assertion to
+ enforce this, and got one regression in the testsuite:
+
+ FAIL: gdb.base/step-over-syscall.exp: vfork: displaced=off: single step over vfork (GDB internal error)
+
+ This call to restart_threads originates from handle_vfork_done which
+ does not check if a step over is active when restarting other threads:
+
+ if (target_is_non_stop_p ())
+ {
+ scoped_restore_current_thread restore_thread;
+
+ insert_breakpoints ();
+ restart_threads (event_thread, event_thread->inf);
+ start_step_over ();
+ }
+
+ In this patch, I propose to:
+ - Call start_step_over before restart_threads. If a step over is already
+ in progress (as it is the case in the failing testcase),
+ start_step_over return immediately, and there is no point in restarting
+ all threads just to stop them right away for a step over breakpoint.
+ - Only call restart_threads if no step over is in progress at this
+ point.
+
+ In this patch, I also propose to keep the assertion in restart_threads
+ to help enforce this precondition, and state it explicitly.
+
+ I have also checked all other places which call restart_threads, and
+ they all seem to check that there is no step over currently active
+ before doing the call.
+
+ As for infrun-related things, I am never completely sure I did not miss
+ something. So as usual, all feedback and thoughts are very welcome.
+
+ Tested on x86_64-linux-gnu.
+
+ Change-Id: If5f5f98ec4cf9aaeaabb5e3aa88ae6ffd70d4f37
+
+2022-04-25 GDB Administrator <gdbadmin@sourceware.org>
+
+ Automatic date update in version.in
+
+2022-04-24 Andrew Burgess <aburgess@redhat.com>
+
+ gdb: move setbuf calls out of gdb_readline_no_editing_callback
+ After this commit:
+
+ commit d08cbc5d3203118da5583296e49273cf82378042
+ Date: Wed Dec 22 12:57:44 2021 +0000
+
+ gdb: unbuffer all input streams when not using readline
+
+ Issues were reported with some MS-Windows hosts, see the thread
+ starting here:
+
+ https://sourceware.org/pipermail/gdb-patches/2022-March/187004.html
+
+ Filed in bugzilla as: PR mi/29002
+
+ The problem seems to be that calling setbuf on terminal file handles
+ is not always acceptable, see this mail for more details:
+
+ https://sourceware.org/pipermail/gdb-patches/2022-April/187310.html
+
+ This commit does two things, first moving the setbuf calls out of
+ gdb_readline_no_editing_callback so that we don't end up calling
+ setbuf so often.
+
+ Then, for MS-Windows hosts, we don't call setbuf for terminals, this
+ appears to resolve the issues that have been reported.
+
+ Bug: https://sourceware.org/bugzilla/show_bug.cgi?id=29002
+
+2022-04-24 GDB Administrator <gdbadmin@sourceware.org>
+
+ Automatic date update in version.in
+
+2022-04-23 GDB Administrator <gdbadmin@sourceware.org>
+
+ Automatic date update in version.in
+
+2022-04-22 Simon Marchi <simon.marchi@efficios.com>
+
+ gdb: handle_no_resumed: only update thread list of event target
+ When running:
+
+ $ make check TESTS="gdb.multi/multi-re-run.exp" RUNTESTFLAGS="--target_board=native-gdbserver"
+
+ I get:
+
+ target remote localhost:2347^M
+ Remote debugging using localhost:2347^M
+ Reading symbols from /lib64/ld-linux-x86-64.so.2...^M
+ Reading symbols from /usr/lib/debug//lib/x86_64-linux-gnu/ld-2.31.so...^M
+ 0x00007ffff7fd0100 in _start () from /lib64/ld-linux-x86-64.so.2^M
+ (gdb) continue^M
+ Continuing.^M
+ Cannot execute this command while the target is running.^M
+ Use the "interrupt" command to stop the target^M
+ and then try again.^M
+ (gdb) FAIL: gdb.multi/multi-re-run.exp: re_run_inf=1: iter=1: runto: run to all_started
+
+ The test does:
+
+ - Connect to a remote target with inferior 2, continue and stop on the
+ all_started function
+ - Connect to a separate remote target / GDBserver instance with inferior 1,
+ continue and (expect to) stop on the all_started function
+
+ The failure seen above happens when trying to continue inferior 1.
+
+ What happens is:
+
+ - GDB tells inferior 1's remote target to continue
+ - We go into fetch_inferior_event, try to get an event at random from
+ the targets
+ - do_target_wait happens to pick inferior 2's target
+ - That target return TARGET_WAITKIND_NO_RESUMED, which makes sense:
+ inferior 2 is stopped, that target has no resumed thread
+ - handle_no_resumed tries to update the thread list of all targets:
+
+ for (auto *target : all_non_exited_process_targets ())
+ {
+ switch_to_target_no_thread (target);
+ update_thread_list ();
+ }
+
+ - When trying to update the thread list of inferior 1's target, it hits
+ the "Cannot execute this command while the target is running" error.
+ This target is working in "remote all-stop" mode, and it is currently
+ waiting for a stop reply, so it can't send packets to update the
+ thread list at this time.
+
+ To handle the problem described in the comment in handle_no_resumed, I
+ don't think it is necessary to update the thread list of all targets,
+ but only the event target. That comment describes a kind of race
+ condition where some target reports a breakpoint hit for a thread and
+ then its last remaining resumed thread exits, so sends a "no resumed"
+ event. If we ended up resuming the thread that hit a breakpoint, we
+ want to ignore the "no resumed" and carry on.
+
+ But I don't really see why we need to update the thread list on the
+ other targets. I can't really articulate this, it's more a gut feeling,
+ maybe I just fail to imagine the situation where this is needed. But
+ here is the patch anyway, so we can discuss it. The patch changes
+ handle_no_resumed to only update the thread list of the event target.
+ This fixes the test run shown above.
+
+ The way I originally tried to fix this was to make
+ remote_target::update_thread_list return early if the target is
+ currently awaiting a stop reply, since there's no way it can update the
+ thread list at that time. But that felt more like papering over the
+ problem. I then thought that we probably shouldn't be asking the target
+ to update the thread list unnecessarily.
+
+ Change-Id: Ide3df22b4f556478e155ad1c67ad4b4fe7c26a58
+
+2022-04-22 Simon Marchi <simon.marchi@polymtl.ca>
+
+ gdbserver/linux: free process_info_private and arch_process_info when failing to attach
+ Running
+
+ $ ../gdbserver/gdbserver --once --attach :1234 539436
+
+ with ASan while /proc/sys/kernel/yama/ptrace_scope is set to 1 (prevents
+ attaching) shows that we fail to free some platform-specific objects
+ tied to the process_info (process_info_private and arch_process_info):
+
+ Direct leak of 32 byte(s) in 1 object(s) allocated from:
+ #0 0x7f6b558b3fb9 in __interceptor_calloc /usr/src/debug/gcc/libsanitizer/asan/asan_malloc_linux.cpp:154
+ #1 0x562eaf15d04a in xcalloc /home/simark/src/binutils-gdb/gdbserver/../gdb/alloc.c:100
+ #2 0x562eaf251548 in xcnew<process_info_private> /home/simark/src/binutils-gdb/gdbserver/../gdbsupport/poison.h:122
+ #3 0x562eaf22810c in linux_process_target::add_linux_process_no_mem_file(int, int) /home/simark/src/binutils-gdb/gdbserver/linux-low.cc:426
+ #4 0x562eaf22d33f in linux_process_target::attach(unsigned long) /home/simark/src/binutils-gdb/gdbserver/linux-low.cc:1132
+ #5 0x562eaf1a7222 in attach_inferior /home/simark/src/binutils-gdb/gdbserver/server.cc:308
+ #6 0x562eaf1c1016 in captured_main /home/simark/src/binutils-gdb/gdbserver/server.cc:3949
+ #7 0x562eaf1c1d60 in main /home/simark/src/binutils-gdb/gdbserver/server.cc:4084
+ #8 0x7f6b552f630f in __libc_start_call_main (/usr/lib/libc.so.6+0x2d30f)
+
+ Indirect leak of 56 byte(s) in 1 object(s) allocated from:
+ #0 0x7f6b558b3fb9 in __interceptor_calloc /usr/src/debug/gcc/libsanitizer/asan/asan_malloc_linux.cpp:154
+ #1 0x562eaf15d04a in xcalloc /home/simark/src/binutils-gdb/gdbserver/../gdb/alloc.c:100
+ #2 0x562eaf2a0d79 in xcnew<arch_process_info> /home/simark/src/binutils-gdb/gdbserver/../gdbsupport/poison.h:122
+ #3 0x562eaf295e2c in x86_target::low_new_process() /home/simark/src/binutils-gdb/gdbserver/linux-x86-low.cc:723
+ #4 0x562eaf22819b in linux_process_target::add_linux_process_no_mem_file(int, int) /home/simark/src/binutils-gdb/gdbserver/linux-low.cc:428
+ #5 0x562eaf22d33f in linux_process_target::attach(unsigned long) /home/simark/src/binutils-gdb/gdbserver/linux-low.cc:1132
+ #6 0x562eaf1a7222 in attach_inferior /home/simark/src/binutils-gdb/gdbserver/server.cc:308
+ #7 0x562eaf1c1016 in captured_main /home/simark/src/binutils-gdb/gdbserver/server.cc:3949
+ #8 0x562eaf1c1d60 in main /home/simark/src/binutils-gdb/gdbserver/server.cc:4084
+ #9 0x7f6b552f630f in __libc_start_call_main (/usr/lib/libc.so.6+0x2d30f)
+
+ Those objects are deleted by linux_process_target::mourn, but that is
+ not called if we fail to attach, we only call remove_process. I
+ initially fixed this by making linux_process_target::attach call
+ linux_process_target::mourn on failure (before calling error). But this
+ isn't done anywhere else (including in GDB) so it would just be
+ confusing to do things differently here.
+
+ Instead, add a linux_process_target::remove_linux_process helper method
+ (which calls remove_process), and call that instead of remove_process in
+ the Linux target. Move the free-ing of the extra data from the mourn
+ method to that new method.
+
+ Change-Id: I277059a69d5f08087a7f3ef0b8f1792a1fcf7a85
+
+2022-04-22 Andrew Burgess <aburgess@redhat.com>
+
+ gdb: handle bracketed-paste-mode and EOF correctly
+ This commit replaces an earlier commit that worked around the issues
+ reported in bug PR gdb/28833.
+
+ The previous commit just implemented a work around in order to avoid
+ the worst results of the bug, but was not a complete solution. The
+ full solution was considered too risky to merge close to branching GDB
+ 12. This improved fix has been applied after GDB 12 branched. See
+ this thread for more details:
+
+ https://sourceware.org/pipermail/gdb-patches/2022-March/186391.html
+
+ This commit replaces this earlier commit:
+
+ commit 74a159a420d4b466cc81061c16d444568e36740c
+ Date: Fri Mar 11 14:44:03 2022 +0000
+
+ gdb: work around prompt corruption caused by bracketed-paste-mode
+
+ Please read that commit for a full description of the bug, and why is
+ occurs.
+
+ In this commit I extend GDB to use readline's rl_deprep_term_function
+ hook to call a new function gdb_rl_deprep_term_function. From this
+ new function we can now print the 'quit' message, this replaces the
+ old printing of 'quit' in command_line_handler. Of course, we only
+ print 'quit' in gdb_rl_deprep_term_function when we are handling EOF,
+ but thanks to the previous commit (to readline) we now know when this
+ is.
+
+ There are two aspects of this commit that are worth further
+ discussion, the first is in the new gdb_rl_deprep_term_function
+ function. In here I have used a scoped_restore_tmpl to disable the
+ readline global variable rl_eof_found.
+
+ The reason for this is that, in rl_deprep_terminal, readline will
+ print an extra '\n' character before printing the escape sequence to
+ leave bracketed paste mode. You might then think that in the
+ gdb_rl_deprep_term_function function, we could simply print "quit" and
+ rely on rl_deprep_terminal to print the trailing '\n'. However,
+ rl_deprep_terminal only prints the '\n' when bracketed paste mode is
+ on. If the user has turned this feature off, no '\n' is printed.
+ This means that in gdb_rl_deprep_term_function we need to print
+ "quit" when bracketed paste mode is on, and "quit\n" when bracketed
+ paste mode is off.
+
+ We could absolutely do that, no problem, but given we know how
+ rl_deprep_terminal is implemented, it's easier (I think) to just
+ temporarily clear rl_eof_found, this prevents the '\n' being printed
+ from rl_deprep_terminal, and so in gdb_rl_deprep_term_function, we can
+ now always print "quit\n" and this works for all cases.
+
+ The second issue that should be discussed is backwards compatibility
+ with older versions of readline. GDB can be built against the system
+ readline, which might be older than the version contained within GDB's
+ tree. If this is the case then the system readline might not contain
+ the fixes needed to support correctly printing the 'quit' string.
+
+ To handle this situation I have retained the existing code in
+ command_line_handler for printing 'quit', however, this code is only
+ used now if the version of readline we are using doesn't not include
+ the required fixes. And so, if a user is using an older version of
+ readline, and they have bracketed paste mode on, then they will see
+ the 'quit' sting printed on the line below the prompt, like this:
+
+ (gdb)
+ quit
+
+ I think this is the best we can do when someone builds GDB against an
+ older version of readline.
+
+ Using a newer version of readline, or the patched version of readline
+ that is in-tree, will now give a result like this in all cases:
+
+ (gdb) quit
+
+ Which is what we want.
+
+ Bug: https://sourceware.org/bugzilla/show_bug.cgi?id=28833
+
+2022-04-22 Andrew Burgess <aburgess@redhat.com>
+
+ readline: back-port changes needed to properly detect EOF
+ This commit is a partial back-port of this upstream readline commit:
+
+ commit 002d31aa5f5929eb32d0e0e2e8b8d35d99e59961
+ Author: Chet Ramey <chet.ramey@case.edu>
+ Date: Thu Mar 3 11:11:47 2022 -0500
+
+ add rl_eof_found to public API; fix pointer aliasing problems \
+ with history-search-backward; fix a display problem with \
+ runs of invisible characters at the end of a physical \
+ screen line
+
+ I have only pulled in the parts of this commit that relate to the new
+ rl_eof_found global, and the RL_STATE_EOF state flag. These changes
+ are needed in order to fix PR cli/28833, and are discussed in this
+ thread to the bug-readline mailing list:
+
+ https://lists.gnu.org/archive/html/bug-readline/2022-02/msg00021.html
+
+ The above commit is not yet in any official readline release, but my
+ hope is that now it has been merged into the readline tree it should
+ be safe enough to back port this fix to GDB's tree.
+
+ At some point in the future we will inevitably want to roll forward
+ the version of readline that we maintain in the binutils-gdb
+ repository. When that day comes the changes in this commit can be
+ replaced with the latest upstream readline code, as I have not changed
+ the meaning of this code at all from what is in upstream readline.
+
+ This commit alone does not fix the PR cli/28833 issue, for that see
+ the next commit, which changes GDB itself.
+
+ Bug: https://sourceware.org/bugzilla/show_bug.cgi?id=28833
+
+2022-04-22 Andrew Burgess <aburgess@redhat.com>
+
+ gdb: improved EOF handling when using readline 7
+ In this commit:
+
+ commit a6b413d24ccc5d76179bab866834e11fd6fec294
+ Date: Fri Mar 11 14:44:03 2022 +0000
+
+ gdb: work around prompt corruption caused by bracketed-paste-mode
+
+ a change was made to GDB to work around bug PR gdb/28833. The
+ consequence of this work around is that, when bracketed paste mode is
+ enabled in readline, and GDB is quit by sending EOF, then the output
+ will look like this:
+
+ (gdb)
+ quit
+
+ The ideal output, which is what we get when bracketed paste mode is
+ off, is this:
+
+ (gdb) quit
+
+ The reason we need to make this change is explained in the original
+ commit referenced above. What isn't mentioned in the above commit, is
+ that the change that motivated this work around was only added in
+ readline 8, older versions of readline don't require the change.
+
+ In later commits in this series I will add a fix to GDB's in-tree copy
+ of readline (this fix is back-ported from upstream readline), and then
+ I will change GDB so that, when using the (patched) in-tree readline,
+ we can have the ideal output in all cases.
+
+ However, GDB can be built against the system readline. When this is
+ done, and the system readline is version 8, then we will still have to
+ use the work around (two line) style output.
+
+ But, if GDB is built against the system readline, and the system
+ readline is an older version 7 readline, then there's no reason why we
+ can't have the ideal output, after all, readline 7 doesn't include the
+ change that we need to work around.
+
+ This commit changes GDB so that, when using readline 7 we get the
+ ideal output in all cases. This change is trivial (a simple check
+ against the readline version number) so I think this should be fine to
+ include.
+
+ For testing this commit, you need to configure GDB including the
+ '--with-system-readline' flag, and build GDB on a system that uses
+ readline 7, for example 'Ubuntu 18.04'. Then run the test
+ 'gdb.base/eof-exit.exp', you should expect everything to PASS.
+
+ Bug: https://sourceware.org/bugzilla/show_bug.cgi?id=28833
+
+2022-04-22 Simon Marchi <simon.marchi@efficios.com>
+
+ gdb: prune inferiors at end of fetch_inferior_event, fix intermittent failure of gdb.threads/fork-plus-threads.exp
+ This test sometimes fail like this:
+
+ info threads^M
+ Id Target Id Frame ^M
+ 11.12 process 2270719 Couldn't get registers: No such process.^M
+ (gdb) FAIL: gdb.threads/fork-plus-threads.exp: detach-on-fork=off: no threads left
+ [Inferior 11 (process 2270719) exited normally]^M
+ info inferiors^M
+ Num Description Connection Executable ^M
+ * 1 <null> /home/smarchi/build/binutils-gdb/gdb/testsuite/outputs/gdb.threads/fork-plus-threads/fork-plus-threads ^M
+ 11 <null> /home/smarchi/build/binutils-gdb/gdb/testsuite/outputs/gdb.threads/fork-plus-threads/fork-plus-threads ^M
+ (gdb) FAIL: gdb.threads/fork-plus-threads.exp: detach-on-fork=off: only inferior 1 left (the program exited)
+
+ I can get it to fail quite reliably by pinning it to a core:
+
+ $ taskset -c 5 make check TESTS="gdb.threads/fork-plus-threads.exp"
+
+ The previous attempt at fixing this was:
+
+ https://sourceware.org/pipermail/gdb-patches/2021-October/182846.html
+
+ What we see is part due to a possible unfortunate ordering of events
+ given by the kernel, and what could be considered a bug in GDB.
+
+ The test program makes a number of forks, waits them all, then exits.
+ Most of the time, GDB will get and process the exit event for inferior 1
+ after the exit events of all the children. But this is not guaranteed.
+ After the last child exits and is waited by the parent, the parent can
+ exit quickly, such that GDB collects from the kernel the exit events for
+ the parent and that child at the same time. It then chooses one event
+ at random, which can be the event for the parent. This will result in
+ the parent appearing to exit before its child. There's not much we can
+ do about it, so I think we have to adjust the test to cope.
+
+ After expect has seen the "exited normally" notification for inferior 1,
+ it immediately does an "info thread" that it expects to come back empty.
+ But at this point, GDB might not have processed inferior 11's (the last
+ child) exit event, so it will look like there is still a thread. Of
+ course that thread is dead, we just don't know it yet. But that makes
+ the "no thread" test fail. If the test waited just a bit more for the
+ "exited normally" notification for inferior 11, then the list of threads
+ would be empty.
+
+ So, first change, make the test collect all the "exited normally"
+ notifications for all inferiors before proceeding, that should ensure we
+ see an empty thread list. That would fix the first FAIL above.
+
+ However, we would still have the second FAIL, as we expect inferior 11
+ to not be there, it should have been deleted automatically. Inferior 11
+ is normally deleted when prune_inferiors is called. That is called by
+ normal_stop, which is only called by fetch_inferior_event only if the
+ event thread completed an execution command FSM (thread_fsm). But the
+ FSM for the continue command completed when inferior 1 exited. At that
+ point inferior 11 was not prunable, as it still had a thread. When
+ inferior 11 exits, prune_inferiors is not called.
+
+ I think that can be considered a GDB bug. From the user point of view,
+ there's no reason why in one case inferior 11 would be deleted and not
+ in the other case.
+
+ This patch makes the somewhat naive change to call prune_inferiors in
+ fetch_inferior_event, so that it is called in this case. It is placed
+ at this particular point in the function so that it is called after the
+ user inferior / thread selection is restored. If it was called before
+ that, inferior 11 wouldn't be pruned, because it would still be the
+ current inferior.
+
+ Change-Id: I48a15d118f30b1c72c528a9f805ed4974170484a
+ Bug: https://sourceware.org/bugzilla/show_bug.cgi?id=26272
+
+2022-04-22 Tom Tromey <tromey@adacore.com>
+
+ Un-break the coff-pe-read.c build
+ This fixes a build breakage in my recent coff-pe-read.c change.
+
+ I'm sorry about this. I don't understand how it happened, because I
+ definitely built and tested the series on Windows, and I didn't change
+ it before pushing. Something must have gone wrong on the Windows
+ build, but I don't know what. I'll investigate and and re-test to be
+ sure.
+
+2022-04-22 Tom Tromey <tromey@adacore.com>
+
+ More const use and alloca avoidance in coff-pe-read.c
+ This changes another function in coff-pe-read.c to use 'const' more,
+ and to avoid the use of alloca by instead using std::string.
+
+ Use std::string in coff-pe-read.c
+ coff-pe-read.c uses xsnprintf and alloca, but using std::string is
+ better, and just as easy. In general I think alloca is something to
+ be avoided, and unbounded uses especially so.
+
+ Remove a const-removing cast from coff-pe-read.c
+ coff-pe-read.c casts away const at one spot, but this is easily
+ replaced by calling bfd_get_filename directly in a couple of debugging
+ prints.
+
+ Simplify BFD section iteration in coff-pe-read.c
+ coff-pe-read.c iterates over BFD sections using bfd_map_over_sections,
+ but it's much simpler to use a for-each loop. This allows for the
+ removal of helper functions and types.
+
+2022-04-22 Tom Tromey <tromey@adacore.com>
+
+ Fix method naming bug in new DWARF indexer
+ Pedro pointed out that gdb-add-index is much slower with the new DWARF
+ indexer. He also noticed that, in some cases, the generated
+ .gdb_index would have the wrong fully-qualified name for a method.
+
+ I tracked this down to a bug in the indexer. If a type could have
+ methods but was marked as a declaration, the indexer was ignoring it.
+ However, this meant that the internal map to find the qualified name
+ was not updated for this container.
+
+2022-04-22 Christoph Muellner <cmuellner@gcc.gnu.org>
+
+ RISC-V: Add missing DECLARE_INSNs for Zicbo{m,p,z}
+ The recently added support for the Zicbo{m,p,z} extensions did not
+ include DECLARE_INSN() declarations for the instructions.
+ These declarations are needed by GDB's instruction detection code.
+ This patch adds them.
+
+2022-04-22 GDB Administrator <gdbadmin@sourceware.org>
+
+ Automatic date update in version.in
+
+2022-04-21 Carl Love <cel@us.ibm.com>
+
+ Fix for gdb.base/solib-search.exp test.
+ The variable right_lib_flags is not being set correctly to define RIGHT.
+ The value RIGHT is needed to force the address of the library functions
+ lib1_func3 and lib2_func4 to occur at different address in the wrong and
+ right libraries.
+
+ With RIGHT defined correctly, functions lib1_func3 and lib2_func4 occur
+ at different addresses the test runs correctly on Powerpc.
+
+ The test needs the lib2 addresses to be different in the right and
+ wrong cases. That is the point of introducing function lib2_spacer
+ with the ifdef RIGHT compiler directive.
+
+ On Intel, the ARRAY_SIZE of 1 versus 8192 is sufficient to get the
+ dynamic linker to move the addresses of the library. You can also get
+ the same effect on PowerPC but you must use a value much larger than
+ 8192.
+
+ The key thing is that the test was not properly setting RIGHT to
+ defined to get the lib2_spacer function on Intel and Powerpc.
+
+ Without the patch, we have the Intel backtrace for the bad libraries:
+
+ backtrace
+ #0 break_here () at /home/ ... /gdb/testsuite/gdb.base/solib-search.c:30
+ #1 0x00007ffff7fae156 in ?? ()
+ #2 0x00007fffffffc150 in ?? ()
+ #3 0x00007ffff7fbb156 in ?? ()
+ #4 0x00007fffffffc160 in ?? ()
+ #5 0x00007ffff7fae146 in ?? ()
+ #6 0x00007fffffffc170 in ?? ()
+ #7 0x00007ffff7fbb146 in ?? ()
+ #8 0x00007fffffffc180 in ?? ()
+ #9 0x0000555555555156 in main () at /home/ ... /binutils-gdb/gdb/testsuite/gdb.base/solib-search.c:23
+ Backtrace stopped: previous frame inner to this frame (corrupt stack?)
+ (gdb) PASS: gdb.base/solib-search.exp: backtrace (with wrong libs) (data collection)
+
+ The backtrace on Intel with the good libraries is:
+
+ backtrace
+ #0 break_here () at /.../binutils-gdb/gdb/testsuite/gdb.base/solib-search.c:30
+ #1 0x00007ffff7fae156 in lib2_func4 () at /.../binutils-gdb/gdb/testsuite/gdb.base/solib-search-lib2.c:49
+ #2 0x00007ffff7fbb156 in lib1_func3 () at /.../gdb.base/solib-search-lib1.c:49
+ #3 0x00007ffff7fae146 in lib2_func2 () at /.../testsuite/gdb.base/solib-search-lib2.c:30
+ #4 0x00007ffff7fbb146 in lib1_func1 () at /.../gdb.base/solib-search-lib1.c:30
+ #5 0x0000555555555156 in main () at /...solib-search.c:23
+ (gdb) PASS: gdb.base/solib-search.exp: backtrace (with right libs) (data collection)
+ PASS: gdb.base/solib-search.exp: backtrace (with right libs)
+
+ In one case the backtrace is correct and the other it
+ is wrong on Intel. This is due to the fact that the ARRAY_SIZE caused
+ the dynamic linker to move the library function addresses around. I
+ believe it has to do with the default size of the data and code
+ sections used by the dynamic linker.
+
+ So without the patch the backtrace on PowerPC looks like:
+
+ backtrace
+ #0 break_here () at /.../solib-search.c:30
+ #1 0x00007ffff7f007f4 in lib2_func4 () at /.../solib-search-lib2.c:49
+ #2 0x00007ffff7f307f4 in lib1_func3 () at /.../solib-search-lib1.c:49
+ #3 0x00007ffff7f007ac in lib2_func2 () at /.../solib-search-lib2.c:30
+ #4 0x00007ffff7f307ac in lib1_func1 () at /.../solib-search-lib1.c:30
+ #5 0x000000001000074c in main () at /.../solib-search.c:23
+
+ for both the good and bad libraries.
+
+ The patch fixes defining RIGHT in solib-search-lib1.c and solib-search-
+ lib2.c. Note, without the patch the lib1_spacer and lib2_spacer
+ functions do not show up in the object dump of the Intel or Powerpc
+ libraries as it should. The patch fixes that by making sure RIGHT gets
+ defined.
+
+ Now with the patch the backtrace for the bad library on PowerPC looks
+ like:
+
+ backtrace
+ #0 break_here () at /.../solib-search.c:30
+ #1 0x00007ffff7f0083c in __glink_PLTresolve () from /.../solib-search-lib2.so
+ Backtrace stopped: frame did not save the PC
+
+ And the backtrace for the good libraries on PowerPC looks like:
+
+ backtrace
+ #0 break_here () at /.../solib-search.c:30
+ #1 0x00007ffff7f0083c in lib2_func4 () at /.../solib-search-lib2.c:49
+ #2 0x00007ffff7f3083c in lib1_func3 () at /.../solib-search-lib1.c:49
+ #3 0x00007ffff7f007cc in lib2_func2 () at /.../solib-search-lib2.c:30
+ #4 0x00007ffff7f307cc in lib1_func1 () at /.../solib-search-lib1.c:30
+ #5 0x000000001000074c in main () at /.../solib-search.c:23
+ (gdb) PASS: gdb.base/solib-search.exp: backtrace (with right libs) (data collection)
+ PASS: gdb.base/solib-search.exp: backtrace (with right libs)
+
+ The issue then is on Power where the ARRAY_SIZE of 1 versus 8192 is not
+ sufficient to cause the dymanic linker to allocate the libraries at
+ different addresses. I don't claim to understand the specifics of how
+ the dynamic linker works and what the default size is for the data and
+ code sections are. My guess is by default PowerPC allocates a larger
+ data size by default, which is large enough to hold array[8192]. The
+ default size of the data section allocated by the dynamic linker on
+ Intel is not large enough to hold array[8192] thus causing the code
+ section on Intel to have to move when the large array is defined.
+
+ Note on PowerPC, if you make ARRAY_SIZE big enough, then you will cause
+ the library addresses to occur at different addresses as the larger
+ data section forces the code section to a different address. That was
+ actually my original fix for the program until I spoke with Doug Evans
+ who originally wrote the test. Doug noticed that RIGHT was not getting
+ defined as he originally intended in the test.
+
+ With the patch to fix the definition of RIGHT, PowerPC has a bad and a
+ good backtrace because the address of lib1_func3 and lib2_func4 both
+ move because lib1_spacer and lib2_spacer are now defined
+ before lib1_func3 and lib2_func4.
+
+ Without the patch, the lib1_spacer and lib2_spacer function doesn't show
+ up in the binary for the correct or incorrect library on Intel or PowerPC.
+ With the patch, RIGHT gets defined as originally intended for the test on
+ both architectures and lib1_spacer and lib2_spacer function show up in the
+ binaries on both architectures changing the other function addresses as
+ intended thus causing the test work as intended on PowerPC.
+
+2022-04-21 Simon Marchi <simon.marchi@efficios.com>
+
+ gdb/dwarf: remove line_header::header_length field
+ This can be a local in dwarf_decode_line_header.
+
+ Change-Id: I2ecf4616d1a3197bd1e81ded9f999a2da9a685af
+
+2022-04-21 Simon Marchi <simon.marchi@efficios.com>
+
+ gdb/dwarf: remove line_header::total_length field
+ This doesn' have to be a field, it can simply be a local variable in
+ dwarf_decode_line_header. Name the local variable "unit_length", since
+ that's what the field in called in DWARF 4 and 5. It's always easier to
+ follow the code with the standard on the side when we use the same
+ terminology.
+
+ Change-Id: I3ad1022afd9410b193ea11b9b5437686c1e4e633
+
+2022-04-21 Simon Marchi <simon.marchi@efficios.com>
+
+ gdb/testsuite: fix "set temporary breakpoint" DUPLICATEs
+ Commit c67f4e538 ("gdb/testsuite: make gdb.ada/mi_prot.exp stop at
+ expected location") introduced some DUPLICATEs in MI tests using
+ mi_continue_to_line, for example:
+
+ DUPLICATE: gdb.ada/mi_ref_changeable.exp: mi_continue_to_line: set temporary breakpoint
+
+ These test names were previously differentiated by the location passed
+ to mi_continue_to_line. Since the location can contain a path, that
+ commit removed the location from the test name, in favor of a hardcoded
+ string "set temporary breakpoint", hence removing the differentiator.
+
+ mi_continue_to_line receives a "test" parameter, containing a test
+ name. Add a "with_test_prefix" with that name, so that all tests
+ recorded during mi_continue_to_line have this in their name.
+
+ mi_continue_to_line passes that "test" string to mi_get_stop_line, that
+ is a bit superfluous. mi_get_stop_line only uses that string in case of
+ failures (it doesn't record a pass if everything goes fine). Since it's
+ not crucial, just remove it, and adjust all callers.
+
+ Adjust three gdb.mi/mi-var-*.exp tests to use prefixes to differentiate
+ the multiple calls to mi_run_inline_test (which calls
+ mi_continue_to_line).
+
+ Change-Id: I511c6caa70499f8657b1cde37d71068d74d56a74
+
+2022-04-21 Tom Tromey <tromey@adacore.com>
+
+ Always use dwarf2_initialize_objfile
+ Internally we noticed that some tests would fail like so on Windows:
+
+ warning: Section .debug_aranges in [...] has duplicate debug_info_offset 0x0, ignoring .debug_aranges.
+
+ Debugging showed that, in fact, a second CU was being created at this
+ offset. We tracked this down to the fact that, while the ELF reader
+ is careful to re-use the per-BFD data, other readers are not, and
+ could re-read the DWARF data multiple times.
+
+ However, since the change to allow an objfile to have multiple "quick
+ symbol" implementations, there's no reason for this approach -- it's
+ safe and easy for all symbol readers to reuse the per-BFD data when
+ reading DWARF.
+
+ This patch implements this idea, simplifying dwarf2_build_psymtabs and
+ making it private, and then switching to dwarf2_initialize_objfile as
+ the sole way to start the DWARF reader.
+
+ Note that, while I think the call to dwarf2_build_frame_info in
+ machoread.c is also obsolete, I haven't attempted to remove it here.
+
+2022-04-21 Andrew Burgess <aburgess@redhat.com>
+
+ gdb: fix 'remote show FOO-packet' aliases
+ The following behaviour was observed in GDB:
+
+ (gdb) show remote X-packet
+ Support for the `p' packet is auto-detected, currently unknown.
+
+ Note the message mentions the 'p' packet. This is a regression since
+ this commit:
+
+ commit 8579fd136a614985bd27f20539c7bb7c5a51287d
+ Date: Mon Nov 8 14:58:46 2021 +0000
+
+ gdb/gdbsupport: make xstrprintf and xstrvprintf return a unique_ptr
+
+ Before this commit the behaviour was:
+
+ (gdb) show remote X-packet
+ Support for the `X' packet is auto-detected, currently unknown.
+
+ The problem was caused by a failed attempt to ensure that some
+ allocated strings were deleted when GDB exits. The code in the above
+ commit attempted to make use of 'static' to solve this problem,
+ however, the solution was just wrong.
+
+ In this new commit I instead allocate a static vector into which all
+ the allocated strings are stored, this ensures the strings are
+ released when GDB exits (which makes output from tools like valgrind
+ cleaner), but each string within the vector can be unique, which fixes
+ the regression.
+
+2022-04-21 Simon Marchi <simon.marchi@efficios.com>
+
+ gdbsupport: add path_join function
+ In this review [1], Eli pointed out that we should be careful when
+ concatenating file names to avoid duplicated slashes. On Windows, a
+ double slash at the beginning of a file path has a special meaning. So
+ naively concatenating "/" and "foo/bar" would give "//foo/bar", which
+ would not give the desired results. We already have a few spots doing:
+
+ if (first_path ends with a slash)
+ path = first_path + second_path
+ else
+ path = first_path + slash + second_path
+
+ In general, I think it's nice to avoid superfluous slashes in file
+ paths, since they might end up visible to the user and look a bit
+ unprofessional.
+
+ Introduce the path_join function that can be used to join multiple path
+ components together (along with unit tests).
+
+ I initially wanted to make it possible to join two absolute paths, to
+ support the use case of prepending a sysroot path to a target file path,
+ or the prepending the debug-file-directory to a target file path. But
+ the code in solib_find_1 shows that it is more complex than this anyway
+ (for example, when the right hand side is a Windows path with a drive
+ letter). So I don't think we need to support that case in path_join.
+ That also keeps the implementation simpler.
+
+ Change a few spots to use path_join to show how it can be used. I
+ believe that all the spots I changed are guarded by some checks that
+ ensure the right hand side operand is not an absolute path.
+
+ Regression-tested on Ubuntu 18.04. Built-tested on Windows, and I also
+ ran the new unit-test there.
+
+ [1] https://sourceware.org/pipermail/gdb-patches/2022-April/187559.html
+
+ Change-Id: I0df889f7e3f644e045f42ff429277b732eb6c752
+
+2022-04-21 Lancelot SIX <lancelot.six@amd.com>
+
+ gdb_spawn_attach_cmdline: use unsupported instead of untested
+ In a previous commit (b750766ac96: gdb/testsuite: Introduce and use
+ gdb_spawn_attach_cmdline), if gdb_spawn_attach_cmdline cannot have GDB
+ attach to the process because of ptrace restrictions (operation not
+ permitted), the proc issues UNTESTED. This should really be
+ UNSUPPORTED, as it is done in gdb_attach.
+
+ This patch fixes this oversight.
+
+ Change-Id: Ib87e33b9230f3fa7a85e06220ef4c63814b71f7d
+
+2022-04-21 Enze Li <lienze2010@hotmail.com>
+
+ gdb/testsuite: add binary testcases to py-format-string.exp
+ We currently only test decimal and hexadecimal for the
+ gdb.Value.format_string() interface, this patch adds testcases for
+ binary format.
+
+ Tested on x86_64 openSUSE Tumbleweed(VERSION_ID="20220413").
+
+2022-04-21 Pedro Alves <pedro@palves.net>
+
+ gdb.debuginfod/fetch_src_and_symbols.exp: Fix "notice empty URL" test
+ The gdb_test_multiple pattern for the "notice empty URL" test in
+ gdb.debuginfod/fetch_src_and_symbols.exp misses expecting the prompt.
+ Fix it by using -re -wrap.
+
+ Also, by using "confirm off", the message GDB prints if Debuginfod
+ downloading is available doesn't contain "Enable debuginfod" any
+ longer. E.g.:
+
+ ~~~
+ (gdb) file testsuite/outputs/gdb.debuginfod/fetch_src_and_symbols/fetch_src_and_symbols
+ Reading symbols from testsuite/outputs/gdb.debuginfod/fetch_src_and_symbols/fetch_src_and_symbols...
+
+ This GDB supports auto-downloading debuginfo from the following URLs:
+ <http://localhost:123>
+ Enable debuginfod for this session? (y or [n])
+ ~~~
+
+ ~~~
+ (gdb) with confirm off -- file testsuite/outputs/gdb.debuginfod/fetch_src_and_symbols/fetch_src_and_symbols
+ Reading symbols from testsuite/outputs/gdb.debuginfod/fetch_src_and_symbols/fetch_src_and_symbols...
+
+ This GDB supports auto-downloading debuginfo from the following URLs:
+ <http://127.0.0.1:8000>
+ <127.0.0.1:8000>
+ Debuginfod has been disabled.
+ To make this setting permanent, add 'set debuginfod enabled off' to .gdbinit.
+ (No debugging symbols found in testsuite/outputs/gdb.debuginfod/fetch_src_and_symbols/fetch_src_and_symbols)
+ (gdb)
+ ~~~
+
+ I handled that correctly in the other tests that use test_urls, but
+ had forgotten to update the "notice empty URL" one.
+
+ Change-Id: I00040c83466e1494b3875574eb009c571a1504bf
+
+2022-04-21 Alan Modra <amodra@gmail.com>
+
+ prune .note.GNU-stack warning from testsuite
+ binutils/
+ * testsuite/lib/binutils-common.exp (prune_warnings_extra): Remove
+ .note.GNU-stack warning.
+ (run_dump_test): Call prune_warnings for ld and objcopy output.
+ ld/
+ * testsuite/ld-elf/elf.exp: Disable prune_warnings_extra temporarily
+ around test for absent .note.GNU-stack
+ * testsuite/ld-cris/globsymw2.s,
+ * testsuite/ld-cris/warn3.d: Modify "is not implemented" message
+ to avoid dejagnu prune_warnings.
+
+ ld testsuite xcoff XPASS
+ * testsuite/ld-scripts/defined5.d: Don't xfail xcoff targets.
+
+ Delete unused COFF gas macro
+ * config/obj-coff.h (sy_obj): Don't define.
+ (OBJ_SYMFIELD_TYPE): Revise comments.
+
+2022-04-21 GDB Administrator <gdbadmin@sourceware.org>
+
+ Automatic date update in version.in
+
+2022-04-20 Aaron Merey <amerey@redhat.com>
+
+ gdb/debuginfod: Prevent out_of_range exception
+ Trailing whitespace in the string of debuginfod URLs causes an
+ out_of_range exception during the printing of URLs for the first
+ use notice.
+
+ To fix this, stop printing URLs when the substring to be printed
+ consists only of whitespace.
+
+ Also add first use notice testcases.
+
+ Co-Authored-By: Pedro Alves <pedro@palves.net>
+
+2022-04-20 Lancelot SIX <lancelot.six@amd.com>
+
+ gdb/testsuite: Introduce and use gdb_spawn_attach_cmdline
+ Following a7e6a19e87f3d719ea23c65b580a6d9bca4ccab3 "gdb: testsuite: add
+ new gdb_attach to check "attach" command", this commit proposes to
+ introduce the gdb_spawn_attach_cmdline helper and use it in
+ gdb.base/attach.exp.
+
+ This helper starts GDB and adds the "--pid=$PID" argument.
+
+ Also note that both the original and new implementation use
+ gdb_spawn_with_cmdline_opts, which in the end uses default_gdb_spawn.
+ This makes sure that we use $INTERNAL_GDBFLAGS, which by default already
+ contain "-iex \"set height 0\" -iex \"set width 0\"". To avoid
+ repetition of those arguments, gdb_spawn_attach_cmdline does not repeat
+ those arguments.
+
+ To maintain a behavior similat to what gdb.base/attach.exp used to do,
+ gdb_spawn_attach_cmdline keeps the -quiet flag.
+
+ Tested on x86_64-gnu-linux
+
+ Change-Id: I1fdcdb71c86d9c5d34bb28fc86fac68bcec37358
+
+2022-04-20 Tom Tromey <tom@tromey.com>
+
+ Replace symbol_symtab with symbol::symtab
+ This turns symbol_symtab into a method on symbol. It also replaces
+ symbol_set_symtab with a method.
+
+ Replace symbol_arch with symbol::arch
+ This turns symbol_arch into a method on symbol.
+
+ Replace symbol_objfile with symbol::objfile
+ This turns symbol_objfile into a method on symbol.
+
+ Remove symbol::aclass_index
+ Symbols have an aclass_index method, but this isn't needed, because
+ the aclass index isn't useful outside of the symbol implementation.
+
+ Use array_view for symbol_impls
+ It seemed to me that using array_view for symbol_impls would give a
+ bit more error checking, at least when gdb is built in libstdc++ debug
+ mode.
+
+ Add accessors for symbol's artificial field
+ For a series I'm experimenting with, it was handy to hide a symbol's
+ "artificial" field behind accessors. This patch is the result.
+
+ Unify the DWARF index holders
+ The dwarf2_per_bfd object has a separate field for each possible kind
+ of index. Until an earlier patch in this series, two of these were
+ even derived from a common base class, but still had separate slots.
+ This patch unifies all the index fields using the common base class
+ that was introduced earlier in this series. This makes it more
+ obvious that only a single index can be active at a time, and also
+ removes some code from dwarf2_initialize_objfile.
+
+ Add an ad hoc version check to dwarf_scanner_base
+ Some generic code in the DWARF reader has a special case for older
+ versions of .gdb_index. This patch adds an ad hoc version check
+ method so that these spots can work without specific knowledge of
+ which index is in use.
+
+ Simplify version check in dw2_symtab_iter_next
+ This simplifies the index versio check in dw2_symtab_iter_next, by
+ passing a reference to the index object to this function. This avoids
+ an indirection via the per_bfd object.
+
+ Introduce and use dwarf_scanner_base
+ This introduces dwarf_scanner_base, a base class for all the index
+ readers in the DWARF code. Then, it changes both mapped_index_base
+ and cooked_index_vector to derive from this new base class.
+
+ Introduce readnow_functions
+ This introduces readnow_functions, a new subclass of
+ dwarf2_base_index_functions, and changes the DWARF reader to use it.
+ This lets us drop the "index is NULL" hack from the gdb index code.
+
+ Remove some "OBJF_READNOW" code from dwarf2_debug_names_index
+ The dwarf2_debug_names_index code treats a NULL debug_names_table as
+ if it were from OBJF_READNOW. However, this trick is only done for
+ gdb_index, never for debug_names -- see dwarf2_initialize_objfile.
+
+ Let mapped index classes create the quick_symbol_functions object
+ This changes the mapped index classes to create the
+ quick_symbol_functions objects. This is a step toward having a more
+ abstract interface to mapped indices.
+
+ Give mapped_index_base a virtual destructor
+ This changes mapped_index_base to have a virtual destructor, so it can
+ be destroyed via its base class.
+
+ Move mapped_index_base to new header file
+ This moves mapped_index_base and the helper struct name_component to a
+ new header file in gdb/dwarf2/.
+
+2022-04-20 Jan Beulich <jbeulich@suse.com>
+
+ x86: reject all invalid SAE variants
+ So far an SAE-only specifier was accepted for static-rounding insns,
+ while SAE-only insns didn't accept static rounding specifiers. If
+ anything it would make sense the other way around, allowing SAE-only
+ insns to have the (ignored) rounding mode specified individually rather
+ than globally via -mevexrcig=. But for now make things match the SDM.
+
+2022-04-20 Alan Modra <amodra@gmail.com>
+
+ Re: xcoff: implement linker relaxation
+ * xcofflink.c (xcoff_stub_csect_name): Increase buffer size.
+ (xcoff_stub_get_csect_in_range, xcoff_build_one_stub): Whitespace.
+ (bfd_xcoff_size_stubs): Cast PRIx64 arg to required type.
+ Don't use freed stub_name.
+
+ Revert "as: Reject unknown -gXXX option" testsuite
+ This reverts the test committed as part of 6ea673e2d6.
+
+2022-04-20 Cl?ment Chigot <clement.chigot@atos.net>
+
+ xcoff: implement linker relaxation
+ bfd/ChangeLog:
+
+ * coff-rs6000.c (xcoff_reloc_type_noop): Add info argument.
+ (xcoff_reloc_type_fail): Likewise.
+ (xcoff_reloc_type_pos): Likewise.
+ (xcoff_reloc_type_neg): Likewise.
+ (xcoff_reloc_type_rel): Likewise.
+ (xcoff_reloc_type_toc): Likewise.
+ (xcoff_reloc_type_ba): Likewise.
+ (xcoff_reloc_type_crel): Likewise.
+ (xcoff_reloc_type_tls): Likewise.
+ (xcoff_reloc_type_br): Add stub handler.
+ (xcoff_ppc_relocate_section): Add info to
+ xcoff_calculate_relocation.
+ (xcoff_stub_indirect_call_code): New constant.
+ (xcoff_stub_shared_call_code): Likewise.
+ (bfd_xcoff_backend_data): Add stub code fields.
+ (bfd_pmac_xcoff_backend_data): Likewise.
+ * coff64-rs6000.c (xcoff64_reloc_type_br): Add stub handler.
+ (xcoff64_ppc_relocate_section): Add info to
+ xcoff64_calculate_relocation.
+ (xcoff64_stub_indirect_call_code): New constant.
+ (xcoff64_stub_shared_call_code): Likewise.
+ (bfd_xcoff_backend_data): Add stub code fields.
+ (bfd_xcoff_aix5_backend_data): Likewise.
+ * libxcoff.h (struct xcoff_backend_data_rec): Add stub fields.
+ (bfd_xcoff_stub_indirect_call_code): New define.
+ (bfd_xcoff_stub_indirect_call_size): New define.
+ (bfd_xcoff_stub_shared_call_code): New define.
+ (bfd_xcoff_stub_shared_call_size): New define.
+ (xcoff_reloc_function): Add info argument.
+ (enum xcoff_stub_type): New enum.
+ (struct xcoff_stub_hash_entry): New structure.
+ * xcofflink.c (struct xcoff_link_hash_table): Add stub hash
+ table and params fields.
+ (xcoff_stub_hash_entry): New define.
+ (xcoff_stub_hash_lookup): New define.
+ (stub_hash_newfunc): New function.
+ (_bfd_xcoff_bfd_link_hash_table_free): Free the new stub hash
+ table.
+ (_bfd_xcoff_bfd_link_hash_table_create): Create the new stub
+ hash table.
+ (xcoff_link_add_symbols): Save rawsize for XTY_SD.
+ (bfd_xcoff_link_init): New function.
+ (xcoff_stub_csect_name): New function.
+ (xcoff_stub_get_csect_in_range): New function.
+ (xcoff_stub_name): New function.
+ (bfd_xcoff_get_stub_entry): New function.
+ (bfd_xcoff_type_of_stub): New function.
+ (xcoff_add_stub): New function.
+ (xcoff_build_one_stub): New function.
+ (bfd_xcoff_size_stubs): New function.
+ (bfd_xcoff_build_stubs): New function.
+ (xcoff_stub_create_relocations): New function.
+ (xcoff_link_input_bfd): Adapt relocations to stub.
+ (xcoff_write_global_symbol): Adapt to new TOC entries generated
+ for stubs.
+ (_bfd_xcoff_bfd_final_link): Handle stub file.
+ * xcofflink.h (struct bfd_xcoff_link_params): New structure.
+
+ ld/ChangeLog:
+
+ * emultempl/aix.em (params): New variable.
+ (stub_file): New variable.
+ (xcoff_add_stub_section): New function.
+ (xcoff_layout_sections_again): New function
+ (hook_in_stub): New function.
+ (_after_allocation): Add stub creation.
+ (_create_output_section_statements): Allocate stub file and
+ pass params to backend.
+
+2022-04-20 Cl?ment Chigot <clement.chigot@atos.net>
+
+ Stubs (added in a later patch) will generate new .loader symbols, once the allocations have been done. Thus, the .loader section cannot be layout before that.
+ bfd/ChangeLog:
+
+ * coff-rs6000.c (_bfd_xcoff_put_ldsymbol_name): Write len in
+ ldinfo->strings instead of directly in the output_bfd.
+ * coff64-rs6000.c (_bfd_xcoff64_put_ldsymbol_name): Likewise.
+ * xcofflink.c (struct xcoff_link_hash_table): Remove ldrel_count
+ field. Add ldinfo field.
+ (xcoff_mark_symbol): Adjust to new ldinfo field.
+ (xcoff_mark): Likewise.
+ (bfd_xcoff_link_count_reloc): Likewise.
+ (xcoff_build_loader_section): Split into two functions: one that
+ build the loader section (this function) and one that only size
+ it...
+ (xcoff_size_loader_section): ... (this function).
+ (bfd_xcoff_size_dynamic_sections): Adapt to new ldinfo field.
+ Move the part where the dynamic sections are build to ...
+ (bfd_xcoff_build_dynamic_sections): ... this function.
+ * xcofflink.h: Add bfd_xcoff_build_dynamic_sections prototype.
+
+ include/ChangeLog:
+
+ * coff/xcoff.h (struct xcoff_loader_info): Add ldrel_count and
+ libpath fields.
+
+ ld/ChangeLog:
+
+ * emultempl/aix.em (_after_allocation): New function.
+
+2022-04-20 Tom Tromey <tom@tromey.com>
+
+ Use symbol_symtab accessor in compile-object-load.c
+ I noticed that compile-object-load.c directly references owner.symtab
+ of a symbol. However, I think it's better for all users to call
+ symbol_symtab. This patch makes this change.
+
+2022-04-20 Nick Clifton <nickc@redhat.com>
+
+ Add linker warning for when it creates an executable stack.
+ PR 29072
+
+2022-04-20 Tom Tromey <tom@tromey.com>
+
+ Micro-optimize cooked_index_entry::full_name
+ I noticed that cooked_index_entry::full_name can return the canonical
+ string when there is no parent entry.
+
+ Regression tested on x86-64 Fedora 34.
+
+2022-04-20 Tiezhu Yang <yangtiezhu@loongson.cn>
+
+ gdb: LoongArch: Implement loongarch_scan_prologue()
+ If can't determine prologue from the symbol table, need to examine
+ instructions. Implement loongarch_scan_prologue() to analyze the
+ function prologue from START_PC to LIMIT_PC, return the address of
+ the first instruction past the prologue.
+
+2022-04-20 GDB Administrator <gdbadmin@sourceware.org>
+
+ Automatic date update in version.in
+
+2022-04-19 H.J. Lu <hjl.tools@gmail.com>
+
+ as: Reject unknown -gXXX option
+ * as.c (parse_args): Reject unknown -gXXX option.
+ * testsuite/gas/all/empty.s: New file.
+ * testsuite/gas/all/pr29067.d: Likewise.
+ * testsuite/gas/all/pr29067.err: Likewise.
+ * testsuite/gas/all/gas.exp: Run pr29067.
+
+2022-04-19 Lancelot SIX <lancelot.six@amd.com>
+
+ gdb/selftest-arch: Make register_test_foreach_arch generate arch tests lazily
+ The register_test_foreach_arch is used to instantiate a given selftest
+ for all architectures supported by GDB. It is used in many _initialize_*
+ functions (under initialize_all_files, called by gdb_init).
+
+ Because the call is done during GDB's initialization, and because there
+ is no guaranty about the order in which all the _initialize_* functions
+ are executed, when register_test_foreach_arch is called, GDB is not
+ fully initialized. Specifically, when a particular initialize function
+ is executed, only the architectures registered at that point are listed
+ by gdbarch_printable_names.
+
+ As a consequence, the list of selftest effectively executed depends on
+ the order the _initialize_* functions are called. This can be observed
+ with the following:
+
+ $ ./gdb/gdb \
+ -data-directory ./gdb/data-directory \
+ -quiet -batch -ex "maint selftest" 2>&1 \
+ | grep -E "Ran [0-9]+ unit tests"
+ Ran 145 unit tests, 0 failed
+ $ GDB_REVERSE_INIT_FUNCTIONS=1 ./gdb/gdb \
+ -data-directory ./gdb/data-directory \
+ -quiet -batch -ex "maint selftest" 2>&1 \
+ | grep -E "Ran [0-9]+ unit tests"
+ Ran 82 unit tests, 0 failed
+
+ To fix this, make register_test_foreach_arch register a lazy selftest
+ generator. This way when the test generator is eventually executed, all
+ architectures are registered and we do not have a dependency on the
+ order the initialize functions are executed in.
+
+ Tested on x86_64-linux
+
+ Change-Id: I88eefebf7d372ad672f42d3a103e89354bc8a925
+
+2022-04-19 Lancelot SIX <lancelot.six@amd.com>
+
+ gdbsupport/selftest: Allow lazy registration
+ This patch adds a way to delay the registration of tests until the
+ latest possible moment. This is intended for situations where GDB needs
+ to be fully initialized in order to decide if a particular selftest can
+ be executed or not.
+
+ This mechanism will be used in the next patch.
+
+ Change-Id: I7f6b061f4c0a6832226c7080ab4e3a2523e1b0b0
+
+2022-04-19 Lancelot SIX <lancelot.six@amd.com>
+
+ gdbsupport/selftest: Replace for_each_selftest with an iterator_range
+ Remove the callback-based selftests::for_each_selftest function and use
+ an iterator_range instead.
+
+ Also use this iterator range in run_tests so all iterations over the
+ selftests are done in a consistent way. This will become useful in a
+ later commit.
+
+ Change-Id: I0b3a5349a7987fbcb0071f11c394e353df986583
+
+2022-04-19 Jan Beulich <jbeulich@suse.com>
+
+ x86: don't mistake ordinary immediates for SAE / rounding control
+ The way SAE templates are constructed was always puzzling me (including
+ the need for separate templates in the first place), and expressing the
+ extzra attribute via Imm8 actually has a bad effect: Ordinary immediates
+ would also be accepted, leading to an extra byte being added after the
+ instruction (i.e. generating bad code). Before re-working this (in
+ particular to accept proper Intel syntax there), fix the immediate issue
+ by adding the so far missing check.
+
+ x86: VCMPSH is Evex.LLIG
+ These were mistakenly flagged as Evex.128. Getting the LLIG status right
+ for insns allowing for SAE is a prereq for planned further work.
+
+ x86: drop stray CheckRegSize from VFPCLASSPH
+ Like VFPCLASSP{S,D} it has only a single operand allowing multiple
+ sizes, hence there are no pairs of operands to check for consistent
+ size.
+
+ x86/Intel: test non-legacy VCVT{,U}SI2SH insn forms
+ For an unclear reason corresponding AVX512F tests were apparently not
+ cloned or used as reference here, and instead the bogus legacy forms of
+ the insns (with the embedded rounding specifier not last) were used.
+
+2022-04-19 Jan Beulich <jbeulich@suse.com>
+
+ x86: correct and simplify NOP disassembly
+ It's not just REX.W which is ignored with opcode 0x90. The same goes for
+ REX.R and REX.X as well as empty REX. None of these are forms of
+ "xchg %eax,%eax" (which would mean zero-extending %eax to %rax), so they
+ also shouldn't be disassembled this way.
+
+ While there simplify things: A single hook function suffices, thus
+ making it unnecessary to keep two expressions in sync. And checking
+ ins->address_mode for mode_64bit also is unnecessary, as "rex" can be
+ non-zero only in that case anyway.
+
+2022-04-19 GDB Administrator <gdbadmin@sourceware.org>
+
+ Automatic date update in version.in
+
+2022-04-18 Simon Marchi <simon.marchi@efficios.com>
+
+ gdb/testsuite/dwarf: don't automatically add directory and file entry for DWARF 5
+ To support DWARF 5 in the DWARF assembler line tables, we currently copy
+ the first user-provided directory and the first user-provided files and
+ make them elements at indices 0 in the directory and file name tables.
+ That was a sufficient behavior at the time (see commit 44fda089397a
+ ("[gdb/testsuite] Support .debug_line v5 in dwarf assembler")), but in
+ the following patches, I would need to have finer grained control on
+ what is generated exactly. For example, I'd like to generate a DWARF 5 line
+ table with just a single file and a single directory.
+
+ Get rid of this behavior, and implement what is suggested in
+ 44fda089397a: make include_dir return the directory index that can be
+ used to refer to that directory entry (based on the DWARF version), and
+ use it afterwards.
+
+ Adjust dw2-lines.exp and dw2-prologue-end.exp accordingly. Their produced
+ DWARF5 binaries will change a bit, in that they will now have a single
+ directory and file, where they had two before. But it doesn't change
+ the expected GDB behavior.
+
+ Change-Id: I5459b16ac9b7f28c34c9693c35c9afd2ebb3aa3b
+
+2022-04-18 Simon Marchi <simon.marchi@efficios.com>
+
+ gdb: use gdb_tilde_expand instead of gdb_tilde_expand_up in source_script_with_search
+ Since this is the latest use of gdb_tilde_expand_up, remove it.
+
+ Change-Id: I964c812ce55fe087876abf91e7a3577ad79c0425
+
+2022-04-18 Simon Marchi <simon.marchi@efficios.com>
+
+ gdbsupport: make gdb_realpath_keepfile return an std::string
+ I'm trying to switch these functions to use std::string instead of char
+ arrays, as much as possible. Some callers benefit from it (can avoid
+ doing a copy of the result), while others suffer (have to make one more
+ copy).
+
+ Change-Id: I793aab17baaef8345488f4c40b9094e2695425bc
+
+2022-04-18 Simon Marchi <simon.marchi@efficios.com>
+
+ gdbsupport: make gdb_abspath return an std::string
+ I'm trying to switch these functions to use std::string instead of char
+ arrays, as much as possible. Some callers benefit from it (can avoid
+ doing a copy of the result), while others suffer (have to make one more
+ copy).
+
+ Change-Id: Iced49b8ee2f189744c5072a3b217aab5af17a993
+
+2022-04-18 Simon Marchi <simon.marchi@polymtl.ca>
+
+ gdb: call gdb_tilde_expand instead of gdb_tilde_expand_up in source_script_with_search
+ This removes a use of gdb_tilde_expand_up, which is removed later in
+ this series.
+
+ Change-Id: I5887d526cea987103e4ca24514a982b0a28e992a
+
+2022-04-18 Tom Tromey <tromey@adacore.com>
+
+ Update gnulib
+ This updates gnulib to a relatively recent commit. Most of this was
+ done by the gnulib import script; the only change I made was to
+ update-gnulib.sh.
+
+ Tested on x86-64 Fedora 34. I also did a mingw cross build.
+
+2022-04-18 Tom Tromey <tom@tromey.com>
+
+ Fix C++ cast of derived class to base class
+ PR c++/28907 points out that casting from a derived class to a base
+ class fails in some situations. The problem turned out to be a
+ missing use of value_embedded_offset. One peculiarity here is that,
+ if you managed to construct a pointer-to-derived with an embedded
+ offset of 0, the cast would work -- for example, one of the two new
+ tests here passes without the patch.
+
+ This embedded offset stuff is an endless source of bugs. I wonder if
+ it's possible to get rid of it somehow.
+
+ Regression tested on x86-64 Fedora 34.
+
+ Bug: https://sourceware.org/bugzilla/show_bug.cgi?id=28907
+
+2022-04-18 Simon Marchi <simon.marchi@polymtl.ca>
+
+ gdb/testsuite: make gdb.ada/mi_prot.exp stop at expected location
+ This test attempts to run until the line marked "STOP", which is at
+ prot.adb:34. It first runs until the "main" symbol, then tries to place
+ a breakpoint by line at line 34, without specifying the source file. When looking at the logs:
+
+ -break-insert -t 34^M
+ ^done,bkpt={number="2",type="breakpoint",disp="del",enabled="y",addr="0x0000555555558a6c",func="adafinal",file="/home/simark/build/binutils-gdb-one-target/gdb/testsuite/outputs/gdb.ada/mi_pro t/b~prot.adb",fullname="/home/simark/build/binutils-gdb-one-target/gdb/testsuite/outputs/gdb.ada/mi_prot/b~prot.adb",line="44",thread-groups=["i1"],times="0",original-location="/home/simark/b uild/binutils-gdb-one-target/gdb/testsuite/outputs/gdb.ada/mi_prot/b~prot.adb:34"}^M
+ ... continues ...
+ *stopped,reason="breakpoint-hit",disp="del",bkptno="2",frame={addr="0x0000555555558a6c",func="adafinal",args=[],file="/home/simark/build/binutils-gdb-one-target/gdb/testsuite/outputs/gdb.ada/ mi_prot/b~prot.adb",fullname="/home/simark/build/binutils-gdb-one-target/gdb/testsuite/outputs/gdb.ada/mi_prot/b~prot.adb",line="44",arch="i386:x86-64"},thread-id="1",stopped-threads="all",co re="8"^M
+
+ ... we see that the breakpoint is placed in some generated file, not in
+ the test source file as we expect. The problem is that "b main" in Ada
+ does not place a breakpoint on the "Ada main", but on some symbol in a
+ generated source file. So when stopped at the "main" symbol, we are not
+ stopped in the file that contains the STOP marker at line 34.
+
+ The test passes anyway today, so it doesn't seem to matter that we are
+ stopped at an unexpected location. But it starts failing with this
+ patch [1], because b~prot.adb:34 happens to be between two functions, so
+ the breakpoint doesn't resolve.
+
+ Fix this by placing the breakpoint at "$srcfile:$line", which works
+ regardless of what is the current source file.
+
+ However, this ends up introducing a path in the test name. Modify
+ mi_tbreak and mi_continue_to_line to avoid that.
+
+ [1] https://sourceware.org/pipermail/gdb-patches/2022-April/187686.html
+
+ Change-Id: I742e2a9993046dcb5e30c64fe2ad920a363baf75
+
+2022-04-18 Vignesh Balasubramanian <Vignesh.Balasubrmanian@amd.com>
+
+ gdb/testsuite: add text_segment option to gdb_compile
+ LLVM's lld linker doesn't have the "-Ttext-segment" option, but
+ "--image-base" can be used instead.
+
+ To centralize the logic of checking which option is supported, add the
+ text_segment option to gdb_compile. Change tests that are currently
+ using -Ttext-segment to use that new option instead.
+
+ This patch fixes only compilation error, for example:
+
+ Before:
+
+ $ make check TESTS="gdb.base/jit-elf.exp" RUNTESTFLAGS="CC_FOR_TARGET=clang LDFLAGS_FOR_TARGET=-fuse-ld=ld"
+ Running /home/simark/src/binutils-gdb/gdb/testsuite/gdb.base/jit-elf.exp ...
+ gdb compile failed, clang-13: warning: -Xlinker -Ttext-segment=0x7000000: 'linker' input unused [-Wunused-command-line-argument]
+
+ After:
+
+ $ make check TESTS="gdb.base/jit-elf.exp" RUNTESTFLAGS="CC_FOR_TARGET=clang LDFLAGS_FOR_TARGET=-fuse-ld=ld"
+ Running /home/simark/src/binutils-gdb/gdb/testsuite/gdb.base/jit-elf.exp ...
+ FAIL: gdb.base/jit-elf.exp: one_jit_test-1: continue to breakpoint: break here 1
+ FAIL: gdb.base/jit-elf.exp: one_jit_test-1: continue to breakpoint: break here 2
+ FAIL: gdb.base/jit-elf.exp: one_jit_test-2: continue to breakpoint: break here 1
+ FAIL: gdb.base/jit-elf.exp: one_jit_test-2: info function ^jit_function
+ FAIL: gdb.base/jit-elf.exp: one_jit_test-2: continue to breakpoint: break here 2
+ FAIL: gdb.base/jit-elf.exp: attach: one_jit_test-2: continue to breakpoint: break here 1
+ FAIL: gdb.base/jit-elf.exp: attach: one_jit_test-2: break here 1: attach
+ FAIL: gdb.base/jit-elf.exp: PIE: one_jit_test-1: continue to breakpoint: break here 1
+ FAIL: gdb.base/jit-elf.exp: PIE: one_jit_test-1: continue to breakpoint: break here 2
+
+ === gdb Summary ===
+
+ # of expected passes 26
+ # of unexpected failures 9
+
+ Change-Id: I3678c5c9bbfc2f80671698e28a038e6b3d14e635
+
+2022-04-18 Enze Li <lienze2010@hotmail.com>
+
+ gdb: fix using clear command to delete non-user breakpoints(PR cli/7161)
+ The clear command shouldn't delete momentary and internal breakpoints,
+ nor internal breakpoints created via Python's gdb.Breakpoint.
+
+ This patch fixes this issue and adds a testcase.
+
+ Regression tested on x86_64 openSUSE Tumbleweed(VERSION_ID="20220413").
+
+ Bug: https://sourceware.org/bugzilla/show_bug.cgi?id=7161
+
+2022-04-18 GDB Administrator <gdbadmin@sourceware.org>
+
+ Automatic date update in version.in
+
+2022-04-17 GDB Administrator <gdbadmin@sourceware.org>
+
+ Automatic date update in version.in
+
+2022-04-16 Tom Tromey <tom@tromey.com>
+
+ Add comments to dwarf2/abbrev-cache.h
+ This patch started when I noticed that the unordered_set include
+ wasn't needed in abbrev-cache.h. (That was probably leftover from
+ some earlier implementation of the class.) Then, I noticed that the
+ class itself was under-commented. This patch fixes both issues.
+
+2022-04-16 GDB Administrator <gdbadmin@sourceware.org>
+
+ Automatic date update in version.in
+
+2022-04-15 Tom Tromey <tom@tromey.com>
+
+ Return void from gdb_putc
+ I don't think it's very useful to return the character from gdb_putc,
+ so this patch changes it to return void.
+
+2022-04-15 Tom Tromey <tom@tromey.com>
+
+ Handle "set height 1"
+ PR cli/17151 points out that "set height 1" has pathological behavior
+ in gdb. What I see is that gdb will endlessly print the pagination
+ prompt. This patch takes a simple and expedient approach to a fix:
+ pretend that the height is really 2.
+
+ Bug: https://sourceware.org/bugzilla/show_bug.cgi?id=17151
+
+2022-04-15 Tom Tromey <tom@tromey.com>
+
+ Allow word wrapping even when paging is disabled
+ PR cli/20741 points out that when pagination is disabled, this also
+ disabled word wrapping. However, the manual documents that these
+ settings are separate -- if you intend to disable the wrapping, you
+ must use "set width unlimited".
+
+ This patch fixes the bug by letting the pagination-disabled case fall
+ through to the code that also handles word-wrapping.
+
+ Bug: https://sourceware.org/bugzilla/show_bug.cgi?id=20741
+
+2022-04-15 Tom Tromey <tom@tromey.com>
+
+ Implement value_print for Rust
+ This adds an implementation of the value_print method to Rust. As
+ described in PR rust/22254, this removes a bit of weird-looking output
+ from some "print"s -- because c_value_print is bypassed. I don't have
+ a test for the bug that inspired this patch, because I only know how
+ to reproduce it when using a relatively old Rust compiler. However,
+ the new "cast-printing" code in value_print is required, because
+ omitting this causes some existing tests to fail.
+
+ Bug: https://sourceware.org/bugzilla/show_bug.cgi?id=22254
+
+2022-04-15 Tom Tromey <tom@tromey.com>
+
+ Reimplement Rust slice printing
+ The current nightly Rust compiler (aka 1.61) added better DWARF
+ representation for unsized types. Fixing this is PR rust/21466; but
+ the code is actually the same as what is required to make slice
+ printing more useful, which is PR rust/23871. This patch implements
+ this. I tested this against various Rust compilers: 1.48, current
+ stable, current beta, and current nightly.
+
+ Bug: https://sourceware.org/bugzilla/show_bug.cgi?id=21466
+ Bug: https://sourceware.org/bugzilla/show_bug.cgi?id=23871
+
+2022-04-15 Tom Tromey <tom@tromey.com>
+
+ Remove some dead code from the Rust value printer
+ This removes a bit of dead code from the Rust value printer. This
+ code wasn't always dead -- it fixed a real bug, and a test case was
+ added for it. However, once val_print was removed, it became
+ unnecessary.
+
+2022-04-15 Tom Tromey <tom@tromey.com>
+
+ Match rustc beta versions
+ The rust_compiler_version proc extracts the Rust compiler version from
+ the "rustc --version" output. For a beta compiler, the output looks
+ like:
+
+ rustc 1.60.0-beta.6 (7bccde197 2022-03-22)
+
+ This patch slightly relaxes the regexp -- removing a space -- so that
+ this can be understood by this proc.
+
+2022-04-15 Tom de Vries <tdevries@suse.de>
+
+ [gdb/testsuite] Fix gdb.ada/float-bits.exp with -m32
+ With test-case gdb.ada/float-bits.exp and native we get:
+ ...
+ (gdb) print 16llf#7FFFF7FF4054A56FA5B99019A5C8#^M
+ $9 = 5.0e+25^M
+ (gdb) PASS: gdb.ada/float-bits.exp: print 16llf#7FFFF7FF4054A56FA5B99019A5C8#
+ ...
+ but with target board unix/-m32 we have instead:
+ ...
+ (gdb) print 16llf#7FFFF7FF4054A56FA5B99019A5C8#^M
+ Cannot export value 2596145952482202326224873165792712 as 96-bits \
+ unsigned integer (must be between 0 and 79228162514264337593543950335)^M
+ (gdb) FAIL: gdb.ada/float-bits.exp: print 16llf#7FFFF7FF4054A56FA5B99019A5C8#
+ ...
+
+ Fix this by testing whether 16llf is supported by doing ptype long_long_float
+ which gets us either:
+ ...
+ type = <16-byte float>^M
+ ...
+ or:
+ ...
+ type = <12-byte float>^M
+ ...
+
+ Tested on x86_64-linux with native and unix/-m32.
+
+ Bug: https://sourceware.org/bugzilla/show_bug.cgi?id=29041
+
+2022-04-15 Tom Tromey <tom@tromey.com>
+
+ Remove WITH_SIM define
+ Since score-tdep.c was removed, the WITH_SIM define is not used in
+ gdb. This patch removes it.
+
+ Note that re-running autoheader shows a separate change that was
+ missed. I've kept it in this patch to avoid extra work.
+
+2022-04-15 Tom de Vries <tdevries@suse.de>
+
+ [gdb/testsuite] Fix gdb.go/methods.exp with check-readmore
+ When running test-case gdb.go/methods.exp with make check we have:
+ ...
+ (gdb) break main.T.Foo^M
+ Function "main.T.Foo" not defined.^M
+ Make breakpoint pending on future shared library load? (y or [n]) n^M
+ (gdb) XFAIL: gdb.go/methods.exp: gdb_breakpoint: set breakpoint at main.T.Foo
+ ...
+ but with make check-readmore the XFAIL fails to trigger:
+ ...
+ (gdb) break main.T.Foo^M
+ Function "main.T.Foo" not defined.^M
+ Make breakpoint pending on future shared library load? (y or [n]) n^M
+ (gdb) FAIL: gdb.go/methods.exp: gdb_breakpoint: set breakpoint at main.T.Foo
+ ...
+
+ This happens because this gdb_test_multiple "maintenance print symbols"
+ regexp:
+ ...
+ -re "\r\n$gdb_prompt $" {
+ ...
+ matches the entire command output.
+
+ Fix this by adding the missing ^ at the regexp start.
+
+ Tested on x86_64-linux.
+
+ Bug: https://sourceware.org/bugzilla/show_bug.cgi?id=29064
+
+2022-04-15 GDB Administrator <gdbadmin@sourceware.org>
+
+ Automatic date update in version.in
+
+2022-04-14 Pedro Alves <pedro@palves.net>
+
+ gdbserver: Eliminate prepare_to_access_memory
+ Given:
+
+ - The prepare_to_access_memory machinery was added for non-stop mode.
+
+ - Only Linux supports non-stop.
+
+ - Linux no longer needs the prepare_to_access_memory machinery. In
+ fact, after the previous patch,
+ linux_process_target::prepare_to_access_memory became a nop.
+
+ Thus, prepare_to_access_memory can go away, simplifying core GDBserver
+ code.
+
+ Change-Id: I93ac8bfe66bd61c3d1c4a0e7d419335163120ecf
+
+2022-04-14 Pedro Alves <pedro@palves.net>
+
+ gdbserver/linux: Access memory even if threads are running
+ Similarly to how the native Linux target was changed
+ and subsequently reworked in these commits:
+
+ 05c06f318fd9 Linux: Access memory even if threads are running
+ 8a89ddbda2ec Avoid /proc/pid/mem races (PR 28065)
+
+ ... teach GDBserver to access memory even when the current thread is
+ running, by always accessing memory via /proc/PID/mem.
+
+ The existing comment:
+
+ /* Neither ptrace nor /proc/PID/mem allow accessing memory through a
+ running LWP. */
+
+ ... is incorrect for /proc/PID/mem does allow that.
+
+ Actually, from GDB's perspective, GDBserver could already access
+ memory while threads were running, but at the expense of pausing all
+ threads for the duration of the memory access, via
+ prepare_to_access_memory. This new implementation does not require
+ pausing any thread, thus
+ linux_process_target::prepare_to_access_memory /
+ linux_process_target::done_accessing_memory become nops. A subsequent
+ patch will remove the whole prepare_to_access_memory infrastructure
+ completely.
+
+ The GDBserver linux-low.cc implementation is simpler than GDB's
+ linux-nat.c's, because GDBserver always adds the unfollowed vfork/fork
+ children to the process list immediately when the fork/vfork event is
+ seen out of ptrace. I.e., there's no need to keep the file descriptor
+ stored on a side map, we can store it directly in the process
+ structure.
+
+ Change-Id: I0abfd782ceaa4ddce8d3e5f3e2dfc5928862ef61
+
+2022-04-14 Pedro Alves <pedro@palves.net>
+
+ gdbserver: special case target_write_memory len==0
+ The next patch in this series adds a common helper routine for both
+ memory reads and writes, like this:
+
+ static int
+ proc_xfer_memory (CORE_ADDR memaddr, unsigned char *readbuf,
+ const gdb_byte *writebuf, int len)
+ {
+ gdb_assert ((readbuf == nullptr) != (writebuf == nullptr));
+ ...
+ }
+
+ int
+ linux_process_target::read_memory (CORE_ADDR memaddr,
+ unsigned char *myaddr, int len)
+ {
+ return proc_xfer_memory (memaddr, myaddr, nullptr, len);
+ }
+
+ linux_process_target::write_memory (CORE_ADDR memaddr,
+ const unsigned char *myaddr, int len)
+ {
+ return proc_xfer_memory (memaddr, nullptr, myaddr, len);
+ }
+
+ Surprisingly, the assertion fails. That happens because it can happen
+ that target_write_memory is called with LEN==0, due to this in
+ gdb/remote.c:
+
+ /* Determine whether the remote target supports binary downloading.
+ This is accomplished by sending a no-op memory write of zero length
+ to the target at the specified address. (...) */
+
+ void
+ remote_target::check_binary_download (CORE_ADDR addr)
+ {
+ ...
+ p = rs->buf.data ();
+ *p++ = 'X';
+ p += hexnumstr (p, (ULONGEST) addr);
+ *p++ = ',';
+ p += hexnumstr (p, (ULONGEST) 0);
+ *p++ = ':';
+ *p = '\0';
+
+ In this scenario, in gdbserver's target_write_memory, the "myaddr"
+ argument of the_target->write_memory is passed the data() of a local
+ gdb::byte_vector (which is a specialized std::vector). It's valid for
+ std::vector::data() to return NULL when the vector is empty.
+
+ This commit adds an early return to target_write_memory to avoid
+ target backends having to care about this. For good measure, do the
+ same on the read side, in read_inferior_memory.
+
+ Change-Id: Iac8f04fcf99014c624ef4036bd318ca1771ad491
+
+2022-04-14 Pedro Alves <pedro@palves.net>
+
+ gdbserver/qXfer::threads, prepare_to_access_memory=>target_pause_all
+ handle_qxfer_threads_proper needs to pause all threads even if the
+ target can read memory when threads are running, so use
+ target_pause_all instead, which is what the Linux implementation of
+ prepare_to_access_memory uses. (Only Linux implements this hook.)
+
+ A following patch will make the Linux backend be able to access memory
+ when threads are running, and thus will also make
+ prepare_to_access_memory do nothing, which would cause testsuite
+ regressions without this change.
+
+ Change-Id: I127fec7246b7c45b60dfa7341e781606bf54b5da
+
+2022-04-14 Tom Tromey <tromey@adacore.com>
+
+ Ignore 0,0 entries in .debug_aranges
+ When running the internal AdaCore test suite against the new DWARF
+ indexer, I found one regression on RISC-V. The test in question uses
+ --gc-sections, and winds up with an entry in the middle of a
+ .debug_aranges that has both address and length of 0. In this
+ scenario, gdb assumes the entries are terminated and then proceeds to
+ reject the section because it reads a subsequent entry as if it were a
+ header.
+
+ It seems to me that, because each header describes the size of each
+ .debug_aranges CU, it's better to simply ignore 0,0 entries and simply
+ read to the end. That is what this patch does.
+
+ I've patched an existing test to provide a regression test for this.
+
+2022-04-14 Tom Tromey <tromey@adacore.com>
+
+ Use GetThreadDescription on Windows
+ Windows 10 introduced SetThreadDescription and GetThreadDescription, a
+ simpler way to set a thread's name. This changes gdb and gdbserver to
+ use this convention when it is available.
+
+ This is part of PR win32/29050.
+
+ Bug: https://sourceware.org/bugzilla/show_bug.cgi?id=29050
+
+2022-04-14 Tom Tromey <tromey@adacore.com>
+
+ Set the worker thread name on Windows
+ This patch is a bit different from the rest of the series, in that it
+ is a change to gdb's behavior on the host. It changes gdb's thread
+ pool to try to set the thread name on Windows, if SetThreadDescription
+ is available.
+
+ This is part of PR win32/29050.
+
+ This patch isn't likely to be useful to many people in the short term,
+ because the Windows port of the libstdc++ thread code is not upstream.
+ (AdaCore uses it, and sent it upstream, but it did not land, I don't
+ know why.) However, if that patch does ever go in, or presumably if
+ you build using some other C++ runtime library, then this will be
+ useful.
+
+ Bug: https://sourceware.org/bugzilla/show_bug.cgi?id=29050
+
+2022-04-14 Tom Tromey <tromey@adacore.com>
+
+ Implement thread_name for gdbserver
+ This changes gdbserver to implement thread_name method.
+
+ Share handle_ms_vc_exception with gdbserver
+ Currently, gdb's native Windows target implements the exception-based
+ approach for setting thread names, but gdbserver does not. This patch
+ moves handle_ms_vc_exception to the shared nat/windows-nat.c code, as
+ preparation for adding this support to gdbserver.
+
+ Move target_read_string to target/target.c
+ This moves the two overloads of target_read_string to a new file,
+ target/target.c, and updates both gdb and gdbserver to build this.
+
+ Remove the byte order parameter to target_read_string
+ target_read_string takes a byte order parameter, but only uses this to
+ check whether a given character is zero. This is readily done without
+ requiring the parameter, so remove it.
+
+ Rename read_string
+ This renames read_string to be an overload of target_read_string.
+ This makes it more consistent for the eventual merger with gdbserver.
+
+ Don't call QUIT in read_string
+ read_string does not need to call QUIT, because target_read_memory
+ already does. This change is needed to make string-reading usable by
+ gdbserver.
+
+ Fix possible Cygwin build problem
+ I noticed that nat/windows-nat.c checks __USEWIDE, but nothing sets it
+ there -- I forgot to copy over the definition when making this file.
+ This patch tries to fix the problem. I don't have a Cygwin setup, so
+ I don't know whether this is sufficient, but it's probably necessary.
+
+2022-04-14 Lancelot SIX <lancelot.six@amd.com>
+ Pedro Alves <pedro@palves.net>
+
+ gdb/testsuite: Fix race in gdb.dwarf2/calling-convention.exp
+ Pedro Alves warned me that there is a race in
+ gdb.dwarf2/calling-convention.exp making the test sometimes fail on his
+ setup. This can be reliably reproduced using :
+
+ make check-read1 TESTS="gdb.dwarf2/calling-convention.exp"
+
+ The relevant part of the gdb.log file is:
+
+ return 35
+ Function 'foo' does not follow the target calling convention.
+ If you continue, setting the return value will probably lead to unpredictable behaviors.
+ Make foo return now? (y or n) PASS: gdb.dwarf2/calling-convention.exp: return 35
+ n
+ Not confirmed
+ (gdb) FAIL: gdb.dwarf2/calling-convention.exp: finish
+
+ The issue is that when doing the test for "return 35", the DejaGnu test
+ sends "n" (to tell GDB not to perform the return action) but never
+ consumes the "Not confirmed" acknowledgment sent by GDB. Later, when
+ trying to do the next test, DejaGnu tries to match the leftover output
+ from the "return" test. As this output is not expected, the test fails.
+
+ Fix by using gdb_test to send the "n" answer and match the confirmation
+ and consume all output to the prompt.
+
+ Also do minor adjustments to the main regex:
+ - Remove the leading ".*" which is not required.
+ - Ensure that the "?" from the question is properly escaped.
+
+ Tested on x86_64-gnu-linux, using
+
+ - make check TESTS="gdb.dwarf2/calling-convention.exp"
+ - make check-read1 TESTS="gdb.dwarf2/calling-convention.exp"
+ - make check-readmore TESTS="gdb.dwarf2/calling-convention.exp"
+
+ Change-Id: I42858b13db2cbd623c5c1739de65ad423e0c0938
+
+2022-04-14 Tom Tromey <tromey@adacore.com>
+
+ Silence -Wmaybe-uninitialized warning from target_waitstatus
+ Currently, one use of target_waitstatus yields a warning:
+
+ target/waitstatus.h: In function 'void stop_all_threads()':
+ target/waitstatus.h:175:13: warning: 'ws.target_waitstatus::m_value' may be used uninitialized in this function [-Wmaybe-uninitialized]
+ 175 | m_value = other.m_value;
+ | ~~~~~~~~^~~~~~~~~~~~~~~
+
+ This patch silences the warning. I tried the "volatile member"
+ approach that was used for gdb::optional, but that didn't work, so
+ this patch simply initializes the member.
+
+2022-04-14 Tom Tromey <tromey@adacore.com>
+
+ Fix regression on Windows with WOW64
+ Internally at AdaCore, we recently started testing a 64-bit gdb
+ debugging 32-bit processes. This failed with gdb head, but not with
+ gdb 11.
+
+ The tests fail like this:
+
+ Starting program: [...].exe
+ warning: Could not load shared library symbols for WOW64_IMAGE_SECTION.
+ Do you need "set solib-search-path" or "set sysroot"?
+ warning: Could not load shared library symbols for WOW64_IMAGE_SECTION.
+ Do you need "set solib-search-path" or "set sysroot"?
+ warning: Could not load shared library symbols for NOT_AN_IMAGE.
+ Do you need "set solib-search-path" or "set sysroot"?
+ warning: Could not load shared library symbols for NOT_AN_IMAGE.
+ Do you need "set solib-search-path" or "set sysroot"?
+
+ After some debugging and bisecting, to my surprise the bug was
+ introduced by commit 183be222 ("gdb, gdbserver: make target_waitstatus
+ safe").
+
+ The problem occurs in handle_exception. Previously the code did:
+
+ - ourstatus->kind = TARGET_WAITKIND_STOPPED;
+ [...]
+ case EXCEPTION_BREAKPOINT:
+ [...]
+ - ourstatus->kind = TARGET_WAITKIND_SPURIOUS;
+ [...]
+ /* FALLTHROUGH */
+ case STATUS_WX86_BREAKPOINT:
+ DEBUG_EXCEPTION_SIMPLE ("EXCEPTION_BREAKPOINT");
+ - ourstatus->value.sig = GDB_SIGNAL_TRAP;
+ [...]
+ - last_sig = ourstatus->value.sig;
+
+ However, in the new code, the fallthrough case does:
+
+ + ourstatus->set_stopped (GDB_SIGNAL_TRAP);
+
+ ... which changes the 'kind' in 'ourstatus' after falling through.
+
+ This patch rearranges the 'last_sig' setting to more closely match
+ what was done before (this is probably not strictly needed but also
+ seemed harmless), and removes the fall-through in the
+ 'ignore_first_breakpoint' case when __x86_64__ is defined.
+
+2022-04-14 Tom Tromey <tromey@adacore.com>
+
+ Reorganize Python events documentation
+ This slightly reorganizes the Python events documentation. It hoists
+ the "ThreadEvent" text out of the list of events, where it seemed to
+ be misplaced. It tidies the formatting a little bit (adding some
+ vertical space for easier reading in info), fixes a typo, adds some
+ missing commas, and fixes an incorrect reference to NewInferiorEvent.
+
+2022-04-14 Simon Marchi <simon.marchi@polymtl.ca>
+
+ gdb: remove move constructor and move assignment operator from cooked_index
+ Building with clang++-14, I see:
+
+ CXX dwarf2/cooked-index.o
+ In file included from /home/smarchi/src/binutils-gdb/gdb/dwarf2/cooked-index.c:21:
+ /home/smarchi/src/binutils-gdb/gdb/dwarf2/cooked-index.h:172:12: error: explicitly defaulted move constructor is implicitly deleted [-Werror,-Wdefaulted-function-deleted]
+ explicit cooked_index (cooked_index &&other) = default;
+ ^
+ /home/smarchi/src/binutils-gdb/gdb/dwarf2/cooked-index.h:225:16: note: move constructor of 'cooked_index' is implicitly deleted because field 'm_storage' has a deleted move constructor
+ auto_obstack m_storage;
+ ^
+ /home/smarchi/src/binutils-gdb/gdb/../gdbsupport/gdb_obstack.h:128:28: note: 'auto_obstack' has been explicitly marked deleted here
+ DISABLE_COPY_AND_ASSIGN (auto_obstack);
+ ^
+ In file included from /home/smarchi/src/binutils-gdb/gdb/dwarf2/cooked-index.c:21:
+ /home/smarchi/src/binutils-gdb/gdb/dwarf2/cooked-index.h:174:17: error: explicitly defaulted move assignment operator is implicitly deleted [-Werror,-Wdefaulted-function-deleted]
+ cooked_index &operator= (cooked_index &&other) = default;
+ ^
+ /home/smarchi/src/binutils-gdb/gdb/dwarf2/cooked-index.h:225:16: note: move assignment operator of 'cooked_index' is implicitly deleted because field 'm_storage' has a deleted move assignment operator
+ auto_obstack m_storage;
+ ^
+ /home/smarchi/src/binutils-gdb/gdb/../gdbsupport/gdb_obstack.h:128:3: note: 'operator=' has been explicitly marked deleted here
+ DISABLE_COPY_AND_ASSIGN (auto_obstack);
+ ^
+ /home/smarchi/src/binutils-gdb/gdb/../include/ansidecl.h:425:8: note: expanded from macro 'DISABLE_COPY_AND_ASSIGN'
+ void operator= (const TYPE &) = delete
+ ^
+
+ We explicitly make cooked_index have a default move constructor and
+ move assignment operator. But it doesn't actually happen because
+ cooked_index has a field of type auto_obstack, which isn't movable.
+ We don't actually need cooked_index to be movable at the moment, so
+ remove those lines.
+
+ Change-Id: Ifc1fe3d7d67e3ae1a14363d6c1869936fe80b0a2
+
+2022-04-14 Tom Tromey <tromey@adacore.com>
+
+ Let std::thread check pass even without pthreads
+ Currently, the configure check for std::thread relies on pthreads
+ existing. However, this means that if std::thread is implemented for
+ a non-pthreads host, then the check will yield the wrong answer. This
+ happened in AdaCore internal builds. Here, we have this GCC patch:
+
+ https://gcc.gnu.org/legacy-ml/gcc-patches/2019-06/msg01840.html
+
+ ... which adds mingw support to GCC's gthreads implementation, and
+ also to std::thread.
+
+ This configure change fixes this problem and enables threading for
+ gdb.
+
+2022-04-14 Tiezhu Yang <yangtiezhu@loongson.cn>
+
+ gdb: fix build errors in gdbsupport/thread-pool.h used with old gcc
+ When I build gdb with gcc 8.3, there exist the following build errors,
+ rename the typedef to task_t to fix them.
+
+ CXX thread-pool.o
+ In file included from /home/loongson/gdb.git/gdbsupport/thread-pool.cc:21:
+ /home/loongson/gdb.git/gdbsupport/../gdbsupport/thread-pool.h: In member function ‘std::future<void> gdb::thread_pool::post_task(std::function<void()>&&)’:
+ /home/loongson/gdb.git/gdbsupport/../gdbsupport/thread-pool.h:69:44: error: declaration of ‘task’ shadows a previous local [-Werror=shadow=local]
+ std::packaged_task<void ()> task (std::move (func));
+ ^~~~
+ /home/loongson/gdb.git/gdbsupport/../gdbsupport/thread-pool.h:102:39: note: shadowed declaration is here
+ typedef std::packaged_task<void ()> task;
+ ^~~~
+ /home/loongson/gdb.git/gdbsupport/../gdbsupport/thread-pool.h: In member function ‘std::future<_Res> gdb::thread_pool::post_task(std::function<T()>&&)’:
+ /home/loongson/gdb.git/gdbsupport/../gdbsupport/thread-pool.h:80:41: error: declaration of ‘task’ shadows a previous local [-Werror=shadow=local]
+ std::packaged_task<T ()> task (std::move (func));
+ ^~~~
+ /home/loongson/gdb.git/gdbsupport/../gdbsupport/thread-pool.h:102:39: note: shadowed declaration is here
+ typedef std::packaged_task<void ()> task;
+ ^~~~
+
+2022-04-14 Tom de Vries <tdevries@suse.de>
+
+ [gdb/testsuite] Detect 'No MPX support'
+ On openSUSE Leap 15.3, mpx support has been disabled for m32, so I run into:
+ ...
+ (gdb) run ^M
+ Starting program: outputs/gdb.arch/i386-mpx/i386-mpx ^M
+ [Thread debugging using libthread_db enabled]^M
+ Using host libthread_db library "/lib64/libthread_db.so.1".^M
+ No MPX support^M
+ ...
+ and eventually into all sort of fails in this and other mpx test-cases.
+
+ Fix this by detecting the "No MPX support" message in have_mpx.
+
+ Tested on x86_64-linux with target boards unix and unix/-m32.
+
+2022-04-14 Sergei Trofimovich <siarheit@google.com>
+
+ M68K: avoid quadratic slowdlow in label alignment check
+ Before the change tc-m68k maintained a list of seen labels.
+ Alignment check traversed label list to resolve symbol to label.
+ This caused quadratic slowdown as each symbol was checked against
+ each label. Worst affected files are the ones built with debugging
+ enabled as DWARF generates many labels.
+
+ The change embeds auxiliary label information right into symbol using
+ TC_SYMFIELD_TYPE.
+
+ Before the change test from PR 29058 did not finish in 10 minutes. After
+ the change it finishes in 2 seconds.
+
+ gas/ChangeLog:
+
+ PR 29058
+ * config/tc-m68k.h (TC_SYMFIELD_TYPE): define as m68k_tc_sy.
+ * config/tc-m68k.c (m68k_frob_label): Use TC_SYMFIELD_TYPE to
+ store label information.
+
+2022-04-14 caiyinyu <caiyinyu@loongson.cn>
+
+ ld:LoongArch: Fix glibc fail: tst-audit25a/b.
+ bfd/
+
+ * elfnn-loongarch.c: Add new func elf_loongarch64_hash_symbol.
+
+2022-04-14 GDB Administrator <gdbadmin@sourceware.org>
+
+ Automatic date update in version.in
+
+2022-04-13 Simon Marchi <simon.marchi@efficios.com>
+
+ gdb: add ATTRIBUTE_PRINTF to complaint_interceptor::issue_complaint
+ Fix this error when building with clang++-14:
+
+ CXX complaints.o
+ /home/smarchi/src/binutils-gdb/gdb/complaints.c:130:65: error: format string is not a string literal [-Werror,-Wformat-nonliteral]
+ g_complaint_interceptor->m_complaints.insert (string_vprintf (fmt, args));
+ ^~~
+
+ Change-Id: I0ef11f970510eb8638d1651fa0d5eeecd6a9d31a
+
+2022-04-13 Simon Marchi <simon.marchi@efficios.com>
+
+ gdb: fix clang build failure in msymbol_is_mips
+ Building with clang++-14, I see:
+
+ CXX mips-tdep.o
+ /home/smarchi/src/binutils-gdb/gdb/mips-tdep.c:453:12: error: use of bitwise '|' with boolean operands [-Werror,-Wbitwise-instead-of-logical]
+ return !(MSYMBOL_TARGET_FLAG_MIPS16 (msym)
+ ~^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+ /home/smarchi/src/binutils-gdb/gdb/mips-tdep.h:54:2: note: expanded from macro 'MSYMBOL_TARGET_FLAG_MIPS16'
+ (sym)->target_flag_1 ()
+ ^
+ /home/smarchi/src/binutils-gdb/gdb/mips-tdep.c:453:12: note: cast one or both operands to int to silence this warning
+ /home/smarchi/src/binutils-gdb/gdb/mips-tdep.h:54:2: note: expanded from macro 'MSYMBOL_TARGET_FLAG_MIPS16'
+ (sym)->target_flag_1 ()
+ ^
+
+ That's since commit e165fcef1e7 ("gdb: remove MSYMBOL_TARGET_FLAG_{1,2}
+ macros"). Fix this by using the boolean || rather than the bitwise |,
+ since the new methods return bool values. No change in behavior
+ expected.
+
+ Change-Id: Ia82664135aa25db64c29c92f5c1141859d345bf7
+
+2022-04-13 Alexander von Gluck IV <kallisti5@unixzen.com>
+
+ binutils: enable PE on 32bit haiku build
+ * config.bfd (x86-haiku): Add i386_pei_vec as a selectable format.
+
+2022-04-13 Pedro Alves <pedro@palves.net>
+
+ Make intrusive_list_node's next/prev private
+ Tromey noticed that intrusive_list_node leaves its data members
+ public, which seems sub-optimal.
+
+ This commit makes intrusive_list_node's data fields private.
+ intrusive_list_iterator, intrusive_list_reverse_iterator, and
+ intrusive_list do need to access the fields, so they are made friends.
+
+ Change-Id: Ia8b306b40344cc218d423c8dfb8355207a612ac5
+
+2022-04-13 Pedro Alves <pedro@palves.net>
+
+ Tidy gdb.base/parse_number.exp
+ Now that Ada is able to parse & print 0xffffffffffffffff (2^64-1) in
+ hex, move it to the else branch like most other languages.
+
+ Change-Id: Ib305f6bb2b6b230a1190ea783b245b865821094c
+
+2022-04-13 Alan Modra <amodra@gmail.com>
+
+ ubsan: member access within null pointer of union
+ Add some nonsense to cover "undefined behaviour".
+
+ * ldlang.c (section_for_dot): Avoid UB.
+
+2022-04-13 GDB Administrator <gdbadmin@sourceware.org>
+
+ Automatic date update in version.in
+
+2022-04-12 Tom Tromey <tromey@adacore.com>
+
+ Fix bug in Ada number lexing
+ On irc, Pedro pointed out that Ada couldn't properly handle
+ 0xffffffffffffffff. This used to work, but is a regression due to
+ some patches I wrote in the Ada lexer. This patch fixes the bug.
+
+2022-04-12 Simon Marchi <simon.marchi@efficios.com>
+
+ gdb: fix "passing NULL to memcpy" UBsan error in dwarf2/cooked-index.c
+ Reading a simple file compiled with :
+
+ $ gcc -DONE=1 -gdwarf-4 -g3 test.c
+ $ gcc --version
+ gcc (Ubuntu 9.4.0-1ubuntu1~20.04) 9.4.0
+
+ I get:
+
+ Reading symbols from /tmp/cwd/a.out...
+ /home/smarchi/src/binutils-gdb/gdb/dwarf2/cooked-index.c:332:11: runtime error: null pointer passed as argument 2, which is declared to never be null
+
+ It looks like even if the size is 0 (the size of the `entries` vector is
+ 0), we shouldn't be passing a NULL pointer to memcpy. And
+ `entries.data ()` returns NULL.
+
+ Fix that by using std::vector::insert to insert the items of entries
+ into m_entries. I haven't checked, but it should essentially compile
+ down to a memcpy, since the vector elements are trivially copyiable.
+
+ Change-Id: I75f1c901e9b522e42e89eb5936e2c70d68eb21e5
+
+2022-04-12 Simon Marchi <simon.marchi@polymtl.ca>
+
+ gdb: change subfile::line_vector to an std::vector
+ Change this field to an std::vector to facilitate memory management.
+ Since the linetable_entry array is copied into the symtab resulting from
+ the subfile, it is possible to change it without changing how symtab
+ stores the linetable entries (which would be a much larger change).
+
+ There is a small change in buildsym_compunit::record_line to avoid
+ accessing a now invalid linetable_entry. Before this patch, we keep a
+ pointer to the last linetable entry, pop it from the vector, and then
+ read last->line. It works with the manually-maintained array, but since
+ we now use std::vector::pop_back, I am afraid that it could be flagged
+ as an invalid access by the various static / dynamic analysis tools to
+ access the linetable_entry object after popping it from the vector.
+ Instead, record just the line number in an optional and use it.
+
+ There are substantial changes in xcoffread.c that simplify the code, but
+ I can't test them. I was hesitant to do this change because of that,
+ but I decided to send it anyway. I don't think that an almost dead
+ platform should hold back improving the code in the common parts of GDB.
+
+ The changes in xcoffread.c are:
+
+ - Make arrange_linetable "arrange" the linetable passed as a parameter,
+ instead of returning possibly a new one, possibly the same one.
+ - In the "Process main file's line numbers.", I'm not too sure what
+ happens. We get the lintable from "main_subfile", "arrange" it, but
+ then assign the result to the current subfile, obtained with
+ get_current_subfile. I assume that the current subfile is also the
+ main one, so now I just call arrange_linetable on the main subfile's
+ line table.
+ - Remove that weird "Useless if!!!" FIXME comment. It's been there
+ forever, but the "if" is still there, so I guess the "if" can stay
+ there.
+
+ Change-Id: I11799006fd85189e8cf5bd3a168f8f38c2c27a80
+
+2022-04-12 Simon Marchi <simon.marchi@efficios.com>
+
+ gdb: use std::vector for temporary linetable_entry array in arrange_linetable
+ Reduce manual memory management and make the code a bit easier to read.
+ This helps me a bit in the following patch.
+
+ I don't have a way to test this, it's best-effort.
+
+ Change-Id: I64af9cd756311deabc6cd95e701dfb21234a40a5
+
+2022-04-12 Simon Marchi <simon.marchi@efficios.com>
+
+ gdb: change subfile::name and buildsym_compunit::m_comp_dir to strings
+ Change subfile::name to be a string, for easier memory management.
+ Change buildsym_compunit::m_comp_dir as well, since we move one in to
+ the other at some point in patch_subfile_names, so it's easier to do
+ both at the same time. There are various NULL checks for both fields
+ currently, replace them with empty checks, I think it ends up
+ equivalent.
+
+ I can't test the change in xcoffread.c, it's best-effort.
+
+ Change-Id: I62b5fb08b2089e096768a090627ac7617e90a016
+
+2022-04-12 Simon Marchi <simon.marchi@polymtl.ca>
+
+ gdb: allocate subfile with new
+ Allocate struct subfile with new, initialize its fields instead of
+ memset-ing it to 0. Use a unique_ptr for the window after a subfile has
+ been allocated but before it is linked in the buildsym_compunit's list
+ of subfile (and therefore owned by the buildsym_compunit.
+
+ I can't test the change in xcoffread.c, it's best-effort. I couldn't
+ find where subfiles are freed in that file, I assume they were
+ intentionally (or not) leaked.
+
+ Change-Id: Ib3b6877de31b7e65bc466682f08dbf5840225f24
+
+2022-04-12 Simon Marchi <simon.marchi@efficios.com>
+
+ gdb: use decltype instead of typeof in dwarf2/read.c
+ When building with -std=c++11, I get:
+
+ CXX dwarf2/read.o
+ /home/smarchi/src/binutils-gdb/gdb/dwarf2/read.c: In function ‘void dwarf2_build_psymtabs_hard(dwarf2_per_objfile*)’:
+ /home/smarchi/src/binutils-gdb/gdb/dwarf2/read.c:7130:23: error: expected type-specifier before ‘typeof’
+ 7130 | using iter_type = typeof (per_bfd->all_comp_units.begin ());
+ | ^~~~~~
+
+ This is because typeof is a GNU extension. Use C++'s decltype keyword
+ instead.
+
+ Change-Id: Ieca2e8d25e50f71dc6c615a405a972a54de3ef14
+
+2022-04-12 Simon Marchi <simon.marchi@efficios.com>
+
+ gdbsupport: use result_of_t instead of result_of in parallel-for.h
+ When building with -std=c++11, I get:
+
+ In file included from /home/smarchi/src/binutils-gdb/gdb/unittests/parallel-for-selftests.c:22: /home/smarchi/src/binutils-gdb/gdb/../gdbsupport/parallel-for.h:134:10: error: ‘result_of_t’ is not a member of ‘std’; did you mean ‘result_of’?
+ 134 | std::result_of_t<RangeFunction (RandomIt, RandomIt)>
+ | ^~~~~~~~~~~
+ | result_of
+
+ This is because result_of_t has been introduced in C++14. Use the
+ equivalent result_of<...>::type instead.
+
+ result_of and result_of_t have been removed in C++20 though, so I think
+ we'll need some patches eventually to make the code use invoke_result
+ instead, depending on the C++ version.
+
+ Change-Id: I4817f361c0ebcdd4b32976898fc368bb302b61b9
+
+2022-04-12 Tom Tromey <tom@tromey.com>
+
+ Remove dwarf2_per_cu_data::v
+ Now that the psymtab reader has been removed, the
+ dwarf2_per_cu_data::v union is no longer needed. Instead, we can
+ simply move the members from dwarf2_per_cu_quick_data into
+ dwarf2_per_cu_data and remove the "quick" object entirely.
+
+ Delete DWARF psymtab code
+ This removes the DWARF psymtab reader.
+
+2022-04-12 Tom Tromey <tom@tromey.com>
+
+ Enable the new DWARF indexer
+ This patch finally enables the new indexer. It is left until this
+ point in the series to avoid any regressions; in particular, it has to
+ come after the changes to the DWARF index writer to avoid this
+ problem.
+
+ However, if you experiment with the series, this patch can be moved
+ anywhere from the patch to wire in the new reader to this point.
+ Moving this patch around is how I got separate numbers for the
+ parallelization and background finalization patches.
+
+ In the ongoing performance example, this reduces the time from the
+ baseline of 1.598869 to 0.903534.
+
+2022-04-12 Tom Tromey <tom@tromey.com>
+
+ Adapt .debug_names writer to new DWARF scanner
+ This updates the .debug_names writer to work with the new DWARF
+ scanner.
+
+2022-04-12 Tom Tromey <tom@tromey.com>
+
+ Adapt .gdb_index writer to new DWARF scanner
+ This updates the .gdb_index writer to work with the new DWARF scanner.
+ The .debug_names writer is deferred to another patch, to make review
+ simpler.
+
+ This introduces a small hack to psyms_seen_size, but is
+ inconsequential because this function will be deleted in a subsequent
+ patch.
+
+2022-04-12 Tom Tromey <tom@tromey.com>
+
+ Genericize addrmap handling in the DWARF index writer
+ This updates the DWARF index writing code to make the addrmap-writing
+ a bit more generic. Now, it can handle multiple maps, and it can work
+ using the maps generated by the new indexer.
+
+ Note that the new addrmap_index_data::using_index field will be
+ deleted in a future patch, when the rest of the DWARF psymtab code is
+ removed.
+
+2022-04-12 Tom Tromey <tom@tromey.com>
+
+ Change parameters to write_address_map
+ To support the removal of partial symtabs from the DWARF index writer,
+ this makes a small change to have write_address_map accept the address
+ map as a parameter, rather than assuming it always comes from the
+ per-BFD object.
+
+ Change the key type in psym_index_map
+ In order to change the DWARF index writer to avoid partial symtabs,
+ this patch changes the key type in psym_index_map (and renames that
+ type as well). Using the dwarf2_per_cu_data as the key makes it
+ simpler to reuse this code with the new indexer.
+
+ Rename write_psymtabs_to_index
+ We'll be removing all the psymtab code from the DWARF reader. As a
+ preparatory step, this renames write_psymtabs_to_index to avoid the
+ "psymtab" name.
+
+2022-04-12 Tom Tromey <tom@tromey.com>
+
+ "Finalize" the DWARF index in the background
+ After scanning the CUs, the DWARF indexer merges all the data into a
+ single vector, canonicalizing C++ names as it proceeds. While not
+ necessarily single-threaded, this process is currently done in just
+ one thread, to keep memory costs lower.
+
+ However, this work is all done without reference to any data outside
+ of the indexes. This patch improves the apparent performance of GDB
+ by moving it to the background. All uses of the index are then made
+ to wait for this process to complete.
+
+ In our ongoing example, this reduces the scanning time on gdb itself
+ to 0.173937 (wall). Recall that before this patch, the time was
+ 0.668923; and psymbol reader does this in 1.598869. That is, at the
+ end of this series, we see about a 10x speedup.
+
+2022-04-12 Tom Tromey <tom@tromey.com>
+
+ Parallelize DWARF indexing
+ This parallelizes the new DWARF indexer. The indexer's storage was
+ designed so that each storage object and each indexer is fully
+ independent. This setup makes it simple to scan different CUs
+ independently.
+
+ This patch creates a new cooked index storage object per thread, and
+ then scans a subset of all the CUs in each such thread, using gdb's
+ existing thread pool.
+
+ In the ongoing "gdb gdb" example, this patch reduces the wall time
+ down to 0.668923, from 0.903534. (Note that the 0.903534 is the time
+ for the new index -- that is, when the "enable the new index" patch is
+ rebased to before this one. However, in the final series, that patch
+ appears toward the end. Hopefully this isn't too confusing.)
+
+2022-04-12 Tom Tromey <tom@tromey.com>
+
+ Pre-read DWARF section data
+ Because BFD is not thread-safe, we need to be sure that any section
+ data that is needed is read before trying to do any DWARF indexing in
+ the background.
+
+ This patch takes a simple approach to this -- it pre-reads the
+ "info"-related sections. This is done for the main file, but also any
+ auxiliary files as well, such as the DWO file.
+
+ This patch could be perhaps enhanced by removing some now-redundant
+ calls to dwarf2_section_info::read.
+
+2022-04-12 Tom Tromey <tom@tromey.com>
+
+ Introduce thread-safe handling for complaints
+ This introduces a new class that can be used to make the "complaint"
+ code thread-safe. Instantiating the class installs a new handler that
+ collects complaints, and then prints them all when the object is
+ destroyed.
+
+ This approach requires some locks. I couldn't think of a better way
+ to handle this, though, because the I/O system is not thread-safe.
+
+ It seemed to me that only GDB developers are likely to enable
+ complaints, and because the complaint macro handle this case already
+ (before any locks are required), I reasoned that any performance
+ degradation that would result here would be fine.
+
+ As an aside about complaints -- are they useful at all? I just ignore
+ them, myself, since mostly they seem to indicate compiler problems
+ that can't be solved in the GDB world anyway. I'd personally prefer
+ them to be in a separate tool, like a hypothetical 'dwarflint'.
+
+2022-04-12 Tom Tromey <tom@tromey.com>
+
+ Wire in the new DWARF indexer
+ This wires the new DWARF indexer into the existing reader code. That
+ is, this patch makes the modification necessary to enable the new
+ indexer. It is not actually enabled by this patch -- that will be
+ done later.
+
+ I did a bit of performance testing for this patch and a few others. I
+ copied my built gdb to /tmp, so that each test would be done on the
+ same executable. Then, each time, I did:
+
+ $ ./gdb -nx
+ (gdb) maint time 1
+ (gdb) file /tmp/gdb
+
+ This patch is the baseline and on one machine came in at 1.598869 wall
+ time.
+
+2022-04-12 Tom Tromey <tom@tromey.com>
+
+ Implement quick_symbol_functions for cooked DWARF index
+ This implements quick_symbol_functions for the cooked DWARF index.
+ This is the code that interfaces between the new index and the rest of
+ gdb. Cooked indexes still aren't created by anything.
+
+ For the most part this is straightforward. It shares some concepts
+ with the existing DWARF indices. However, because names are stored
+ pre-split in the cooked index, name lookup here is necessarily
+ different; see expand_symtabs_matching for the gory details.
+
+2022-04-12 Tom Tromey <tom@tromey.com>
+
+ The new DWARF indexer
+ This patch adds the code to index DWARF. This is just the scanner; it
+ reads the DWARF and constructs the index, but nothing calls it yet.
+
+ The indexer is split into two parts: a storage object and an indexer
+ object. This is done to support the parallelization of this code -- a
+ future patch will create a single storage object per thread.
+
+2022-04-12 Tom Tromey <tom@tromey.com>
+
+ Introduce the new DWARF index class
+ This patch introduces the new DWARF index class. It is called
+ "cooked" to contrast against a "raw" index, which is mapped from disk
+ without extra effort.
+
+ Nothing constructs a cooked index yet. The essential idea here is
+ that index entries are created via the "add" method; then when all the
+ entries have been read, they are "finalize"d -- name canonicalization
+ is performed and the entries are added to a sorted vector.
+
+ Entries use the DWARF name (DW_AT_name) or linkage name, not the full
+ name as is done for partial symbols.
+
+ These two facets -- the short name and the deferred canonicalization
+ -- help improve the performance of this approach. This will become
+ clear in later patches, when parallelization is added.
+
+ Some special code is needed for Ada, because GNAT only emits mangled
+ ("encoded", in the Ada lingo) names, and so we reconstruct the
+ hierarchical structure after the fact. This is also done in the
+ finalization phase.
+
+ One other aspect worth noting is that the way the "main" function is
+ found is different in the new code. Currently gdb will notice
+ DW_AT_main_subprogram, but won't recognize "main" during reading --
+ this is done later, via explicit symbol lookup. This is done
+ differently in the new code so that finalization can be done in the
+ background without then requiring a synchronization to look up the
+ symbol.
+
+2022-04-12 Tom Tromey <tom@tromey.com>
+
+ Update skip_one_die for new abbrev properties
+ This updates skip_one_die to speed it up in the cases where either
+ sibling_offset or size_if_constant are set.
+
+2022-04-12 Tom Tromey <tom@tromey.com>
+
+ Statically examine abbrev properties
+ The new DIE scanner works more or less along the lines indicated by
+ the text for the .debug_names section, disregarding the bugs in the
+ specification.
+
+ While working on this, I noticed that whether a DIE is interesting is
+ a static property of the DIE's abbrev. It also turns out that many
+ abbrevs imply a static size for the DIE data, and additionally that
+ for many abbrevs, the sibling offset is stored at a constant offset
+ from the start of the DIE.
+
+ This patch changes the abbrev reader to analyze each abbrev and stash
+ the results on the abbrev. These combine to speed up the new indexer.
+ If the "interesting" flag is false, GDB knows to skip the DIE
+ immediately. If the sibling offset is statically known, skipping can
+ be done without reading any attributes; and in some other cases, the
+ DIE can be skipped using simple arithmetic.
+
+2022-04-12 Tom Tromey <tom@tromey.com>
+
+ Introduce DWARF abbrev cache
+ The replacement for the DWARF psymbol reader works in a somewhat
+ different way. The current reader reads and stores all the DIEs that
+ might be interesting. Then, if it is missing a DIE, it re-scans the
+ CU and reads them all. This approach is used for both intra- and
+ inter-CU references.
+
+ I instrumented the partial DIE hash to see how frequently it was used:
+
+ [ 0] -> 1538165
+ [ 1] -> 4912
+ [ 2] -> 96102
+ [ 3] -> 175
+ [ 4] -> 244
+
+ That is, most DIEs are never used, and some are looked up twice -- but
+ this is just an artifact of the implementation of
+ partial_die_info::fixup, which may do two lookups.
+
+ Based on this, the new implementation doesn't try to store any DIEs,
+ but instead just re-scans them on demand. In order to do this,
+ though, it is convenient to have a cache of DWARF abbrevs. This way,
+ if a second CU is needed to resolve an inter-CU reference, the abbrevs
+ for that CU need only be computed a single time.
+
+2022-04-12 Tom Tromey <tom@tromey.com>
+
+ Add "fullname" handling to file_and_directory
+ This changes the file_and_directory object to be able to compute and
+ cache the "fullname" in the same way that is done by other code, like
+ the psymtab reader.
+
+ Specialize std::hash for gdb_exception
+ This adds a std::hash specialization for gdb_exception. This lets us
+ store these objects in a hash table, which is used later in this
+ series to de-duplicate the exception output from multiple threads.
+
+ Return vector of results from parallel_for_each
+ This changes gdb::parallel_for_each to return a vector of the results.
+ However, if the passed-in function returns void, the return type
+ remains 'void'. This functionality is used later, to parallelize the
+ new indexer.
+
+ Add batching parameter to parallel_for_each
+ parallel_for_each currently requires each thread to process at least
+ 10 elements. However, when indexing, it's fine for a thread to handle
+ just a single CU. This patch parameterizes this, and updates the one
+ user.
+
+ Refactor build_type_psymtabs_reader
+ The new DWARF scanner needs to save the entire cutu_reader object, not
+ just parts of it. In order to make this possible, this patch
+ refactors build_type_psymtabs_reader. This change is done separately
+ because it is easy to review in isolation and it helps make the later
+ patches smaller.
+
+ Add new overload of dwarf5_djb_hash
+ This adds a new overload of dwarf5_djb_hash. This is used in
+ subsequent patches.
+
+2022-04-12 Tom Tromey <tom@tromey.com>
+
+ Add name splitting
+ The new DWARF index code works by keeping names pre-split. That is,
+ rather than storing a symbol name like "a::b::c", the names "a", "b",
+ and "c" will be stored separately.
+
+ This patch introduces some helper code to split a full name into its
+ components.
+
+2022-04-12 Tom Tromey <tom@tromey.com>
+
+ Let skip_one_die not skip children
+ This patch adds an option to skip_one_die that causes it not to skip
+ child DIEs. This is needed in the new scanner.
+
+ Allow ada_decode not to decode operators
+ The new DWARF scanner records names as they appear in DWARF. However,
+ because Ada is unusual, it also decodes the Ada names to synthesize
+ package components for them. In order for this to work out properly,
+ gdb also needs a mode where ada_decode can be instructed not to decode
+ Ada operator names. That is what this patch implements.
+
+ Refactor dwarf2_get_pc_bounds
+ This changes dwarf2_get_pc_bounds so that it does not directly access
+ a psymtab or psymtabs_addrmap. Instead, both the addrmap and the
+ desired payload are passed as parameters. This makes it suitable to
+ be used by the new indexer.
+
+ Add dwarf2_per_cu_data::addresses_seen
+ This adds a new member to dwarf2_per_cu_data that indicates whether
+ addresses have been seen for this CU. This is then set by the
+ .debug_aranges reader. The idea here is to detect when a CU does not
+ have address information, so that the new indexer will know to do
+ extra scanning in that case.
+
+ Fix latent bug in read_addrmap_from_aranges
+ Tom de Vries found a failure that we tracked down to a latent bug in
+ read_addrmap_from_aranges (previously create_addrmap_from_aranges).
+ The bug is that this code can erroneously reject .debug_aranges when
+ dwz is in use, due to CUs at duplicate offsets. Because aranges can't
+ refer to a CU coming from the dwz file, the fix is to simply skip such
+ CUs in the loop.
+
+ Split create_addrmap_from_aranges
+ This patch splits create_addrmap_from_aranges into a wrapper function
+ and a worker function. The worker function is then used in a later
+ patch.
+
+2022-04-12 Tom Tromey <tom@tromey.com>
+
+ Allow thread-pool.h to work without threads
+ thread-pool.h requires CXX_STD_THREAD in order to even be included.
+ However, there's no deep reason for this, and during review we found
+ that one patch in the new DWARF indexer series unconditionally
+ requires the thread pool.
+
+ Because the thread pool already allows a task to be run in the calling
+ thread (for example if it is configured to have no threads in the
+ pool), it seemed straightforward to make this code ok to use when host
+ threads aren't available at all.
+
+ This patch implements this idea. I built it on a thread-less host
+ (mingw, before my recent configure patch) and verified that the result
+ builds.
+
+ After the thread-pool change, parallel-for.h no longer needs any
+ CXX_STD_THREAD checks at all, so this patch removes these as well.
+
+2022-04-12 Nick Clifton <nickc@redhat.com>
+
+ Rebase the zlib sources to the 1.2.12 release
+
+2022-04-12 Tom de Vries <tdevries@suse.de>
+
+ [gdb/testsuite] Fix gdb.base/stap-probe.exp with read1
+ When running test-case gdb.base/stap-probe.exp with make target check-read1, I
+ run into this and similar:
+ ...
+ FAIL: gdb.base/stap-probe.exp: without semaphore, not optimized: \
+ info probes stap (timeout)
+ ...
+
+ Fix this by using gdb_test_lines instead of gdb_test.
+
+ Tested on x86_64-linux.
+
+2022-04-12 Tom Tromey <tom@tromey.com>
+
+ Add C++ "save gdb-index" test
+ I found a bug in the new DWARF reader series, related to the handling
+ of enumerator names. This bug caused a crash, so this patch adds a
+ regression test for this particular case. I'm checking this in.
+
+2022-04-12 Tom Tromey <tromey@adacore.com>
+
+ Remove "Ada Settings" node from the manual
+ A while back, I sent a patch to unify the Ada varsize-limit setting
+ with the more generic max-value-size:
+
+ https://sourceware.org/pipermail/gdb-patches/2021-September/182004.html
+
+ However, it turns out I somehow neglected to send part of the patch.
+ Internally, I also removed the "Ada Settings" node from the manual, as
+ it only documents the obsolete setting.
+
+ This patch removes this text.
+
+2022-04-12 Tom Tromey <tromey@adacore.com>
+
+ Require GNAT debug info for some Ada tests
+ A few Ada tests require some debug info in the GNAT runtime. When run
+ without this info, these tests can't pass. This patch changes these
+ tests to detect this situation and stop with "untested".
+
+2022-04-12 Nick Clifton <nickc@redhat.com>
+
+ Stop strip from removing debuglink sections.
+ PR 28992
+ * objcopy.c (is_strip_section_1): Do not delete debuglink sections
+ when stripping debug information.
+
+2022-04-12 Jan Beulich <jbeulich@suse.com>
+
+ gas: new_logical_line{,_flags}() can return "void"
+ With the sole user of the return value gone, convert the return type to
+ void. This in turn allows simplifying another construct, by moving it
+ slightly later in the function.
+
+ gas: drop .appfile and .appline
+ These were used originally to represent "# <line> <file>" constructs
+ inserted by (typically) compilers when pre-processing. Quite some time
+ ago they were replaced by .linefile though. Since the original
+ directives were never documented, we ought to be able to remove support
+ for them. As a result in a number of case function parameter aren't used
+ anymore and can hence be dropped.
+
+2022-04-12 Jan Beulich <jbeulich@suse.com>
+
+ gas: further adjust file/line handling for .macro
+ Commit 7992631e8c0b ("gas/Dwarf: improve debug info generation from .irp
+ and alike blocks"), while dealing okay with actual assembly source files
+ not using .file/.line and alike outside but not inside of .macro, has
+ undue effects when the logical file/line pair was already overridden:
+ Line numbers would continuously increment while processing the expanded
+ macro, while the goal of the PR gas/16908 workaround is to keep the
+ expansion associated with the line invoking the macro. However, as soon
+ as enough state was overridden _inside_ the macro to cause as_where() to
+ no longer fall back top as_where_physical(), honor this by resuming the
+ bumping of the logical line number.
+
+ Note that from_sb_is_expansion's initializer was 1 for an unknown
+ reason. While renaming the variable and changing its type, also change
+ the initializer to "expanding_none", which would have been "0" in the
+ original code. Originally the initializer value itself wasn't ever used
+ anyway (requiring sb_index != -1), as it necessarily had changed in
+ input_scrub_include_sb() alongside setting sb_index to other than -1.
+
+ Strictly speaking input_scrub_insert_line() perhaps shouldn't use
+ expanding_none, yet none of the other enumerators fit there either. And
+ then strictly speaking that function probably shouldn't exist in the
+ first place. It's used only by tic54x.
+
+2022-04-12 Jan Beulich <jbeulich@suse.com>
+
+ gas: further adjust file/line handling for .irp and alike
+ Commit 7992631e8c0b ("gas/Dwarf: improve debug info generation from .irp
+ and alike blocks"), while dealing okay with actual assembly source files
+ not using .file/.line and alike outside but not inside of .irp et al,
+ has undue effects when the logical file/line pair was already
+ overridden: Line numbers would continuously increment upon every
+ iteration, thus potentially getting far off. Furthermore it left it to
+ the user to actually insert .file/.line inside such constructs. Note
+ though that before aforementioned change things weren't pretty either:
+ Diagnostics (and debug info) would be associated with the directive
+ terminating the iteration construct, rather than with the actual lines.
+
+ Handle this automatically by simply latching the present line and then
+ re-instating coordinates first thing on every iteration; note that the
+ file can't change from what was previously pushed on the scrubber's
+ state stack, and hence can be taken from there by using a new flavor of
+ .linefile (which is far better memory-footprint-wise than recording the
+ full path in the inserted directive). (This then leaves undisturbed any
+ file/line control occurring in the body of the construct, as these will
+ only be seen and processed afterwards.)
+
+2022-04-12 Jan Beulich <jbeulich@suse.com>
+
+ x86: make {disp16} work similarly to {disp32}
+ In a few places {disp32} was handled specially when really {disp16}
+ wants handling just the same.
+
+2022-04-12 Vladimir Mezentsev <vladimir.mezentsev@oracle.com>
+
+ gprofng doesn't build with gcc 5.5
+ gprofng/ChangeLog
+ 2022-04-07 Vladimir Mezentsev <vladimir.mezentsev@oracle.com>
+
+ PR gprofng/29026
+ * configure.ac: Check version of bison.
+ * src/Makefile.am (QLParser.yy): Run bison
+ * src/QLParser.yy: Adapted for bison 3.04 or later.
+ * src/DbeSession.cc: make some params const.
+ * src/DbeSession.h: Likewise.
+ * configure: Regenerate.
+ * Makefile.in: Regenerate.
+ * src/Makefile.in: Regenerate.
+ * src/QLParser.tab.cc: Deleted.
+ * src/QLParser.tab.hh: Deleted.
+ * doc/Makefile.in: Regenerate.
+ * gp-display-html/Makefile.in: Regenerate.
+ * libcollector/configure: Regenerate.
+
+2022-04-12 GDB Administrator <gdbadmin@sourceware.org>
+
+ Automatic date update in version.in
+
+2022-04-11 John Baldwin <jhb@FreeBSD.org>
+
+ i386-fbsd-nat: Remove two unused variables.
+ Earlier versions of the change in
+ 1285ce8629b37f800bf21731ee7c7a8b1b8d0233 used this variable, but not
+ the final version that landed.
+
+2022-04-11 Simon Marchi <simon.marchi@efficios.com>
+
+ gdb: remove MSYMBOL_TARGET_FLAG_{1,2} macros
+ Replace with equivalent getter/setter macros.
+
+ Change-Id: I1042564dd47347337374762bd64ec31b5c573ee2
+
+2022-04-11 Simon Marchi <simon.marchi@efficios.com>
+
+ gdb: remove minimal symbol size macros
+ Remove MSYMBOL_HAS_SIZE, MSYMBOL_SIZE and SET_MSYMBOL_SIZE, replace them
+ with equivalent methods.
+
+ Change-Id: I6ee1cf82df37e58dff52ea6568ceb4649c7d7538
+
+2022-04-11 Simon Marchi <simon.marchi@efficios.com>
+
+ gdb: remove MSYMBOL_TYPE macro
+ Add a getter and a setter for a minimal symbol's type. Remove the
+ corresponding macro and adjust all callers.
+
+ Change-Id: I89900df5ffa5687133fe1a16b2e0d4684e67a77d
+
+2022-04-11 Simon Marchi <simon.marchi@efficios.com>
+
+ gdb: remove symbol value macros
+ Remove all macros related to getting and setting some symbol value:
+
+ #define SYMBOL_VALUE(symbol) (symbol)->value.ivalue
+ #define SYMBOL_VALUE_ADDRESS(symbol) \
+ #define SET_SYMBOL_VALUE_ADDRESS(symbol, new_value) \
+ #define SYMBOL_VALUE_BYTES(symbol) (symbol)->value.bytes
+ #define SYMBOL_VALUE_COMMON_BLOCK(symbol) (symbol)->value.common_block
+ #define SYMBOL_BLOCK_VALUE(symbol) (symbol)->value.block
+ #define SYMBOL_VALUE_CHAIN(symbol) (symbol)->value.chain
+ #define MSYMBOL_VALUE(symbol) (symbol)->value.ivalue
+ #define MSYMBOL_VALUE_RAW_ADDRESS(symbol) ((symbol)->value.address + 0)
+ #define MSYMBOL_VALUE_ADDRESS(objfile, symbol) \
+ #define BMSYMBOL_VALUE_ADDRESS(symbol) \
+ #define SET_MSYMBOL_VALUE_ADDRESS(symbol, new_value) \
+ #define MSYMBOL_VALUE_BYTES(symbol) (symbol)->value.bytes
+ #define MSYMBOL_BLOCK_VALUE(symbol) (symbol)->value.block
+
+ Replace them with equivalent methods on the appropriate objects.
+
+ Change-Id: Iafdab3b8eefc6dc2fd895aa955bf64fafc59ed50
+
+2022-04-11 Nils-Christian Kempke <nils-christian.kempke@intel.com>
+
+ gdb/doc: add section about Fortran intrinsic functions and types
+ The earlier version of this document had no sections about the
+ available Fortran intrinsic functions or the Fortran builtin types.
+
+ I added two sections 'Fortran intrinsics' and 'Fortran types' to
+ document the available Fortran language features. The subsection
+ 'Fortran Defaults' has been integrated into the Fortran subsection.
+
+2022-04-11 Nils-Christian Kempke <nils-christian.kempke@intel.com>
+
+ gdb/fortran/testsuite: add complex from integers test
+ When working on the files I noted that there was no actual test for a
+ COMPLEX built from two INTEGERS. I added that now for completion.
+
+2022-04-11 Nils-Christian Kempke <nils-christian.kempke@intel.com>
+
+ gdb/fortran: rewrite intrinsic handling and add some missing overloads
+ The operators FLOOR, CEILING, CMPLX, LBOUND, UBOUND, and SIZE accept
+ (some only with Fortran 2003) the optional parameter KIND. This
+ parameter determines the kind of the associated return value. So far,
+ implementation of this kind parameter has been missing in GDB.
+ Additionally, the one argument overload for the CMPLX intrinsic function
+ was not yet available.
+
+ This patch adds overloads for all above mentioned functions to the
+ Fortran intrinsics handling in GDB.
+
+ It re-writes the intrinsic function handling section to use the helper
+ methods wrap_unop_intrinsic/wrap_binop_intrinsic/wrap_triop_intrinsic.
+ These methods define the action taken when a Fortran intrinsic function
+ is called with a certain amount of arguments (1/2/3). The helper methods
+ fortran_wrap2_kind and fortran_wrap3_kind have been added as equivalents
+ to the existing wrap and wrap2 methods.
+
+ After adding more overloads to the intrinsics handling, some of the
+ operation names were no longer accurate. E.g. UNOP_FORTRAN_CEILING
+ has been renamed to FORTRAN_CEILING as it is no longer a purely unary
+ intrinsic function. This patch also introduces intrinsic functions with
+ one, two, or three arguments to the Fortran parser and the
+ UNOP_OR_BINOP_OR_TERNOP_INTRINSIC token has been added.
+
+2022-04-11 Nils-Christian Kempke <nils-christian.kempke@intel.com>
+
+ gdb/fortran: rename f77_keywords to f_keywords
+ Rename f77_keywords to f_keywords since some of the introduced keywords
+ in the array are f90 only.
+
+2022-04-11 Nils-Christian Kempke <nils-christian.kempke@intel.com>
+
+ gdb/fortran: Change GDB print for fortran default types
+ Currently, when asking GDB to print the type of a Fortran default type
+ such as INTEGER or REAL, GDB will return the default name of that type,
+ e.g. "integer"/"real":
+
+ (gdb) ptype integer
+ type = integer
+ (gdb) ptype real
+ type = real
+
+ For LOGICAL and COMPLEX it would return the actual underlying types
+
+ (gdb) ptype logical
+ type = logical*4
+ (gdb) ptype complex
+ type = complex*4
+
+ Similarly, GDB would print the default integer type for the underlying
+ default type:
+
+ (gdb) ptype integer*4
+ type = integer
+ (gdb) ptype real*4
+ type = real
+ (gdb) ptype logical
+ type = logical*4
+ (gdb) ptype complex*4
+ type = complex*4
+
+ This is inconsistent and a bit confusing. Both options somehow indicate
+ what the internal underlying type for the default type is - but I think
+ the logical/complex version is a bit clearer.
+
+ Consider again:
+
+ (gdb) ptype integer
+ type = integer
+
+ This indicates to a user that the type of "integer" is Fortran's default
+ integer type. Without examining "ptype integer*4" I would expect, that
+ any variable declared integer in the actual code would also fit into a
+ GDB integer. But, since we cannot adapt out internal types to the
+ compiler flags used at compile time of a debugged binary, this might be
+ wrong. Consider debugging Fortran code compiled with GNU and e.g. the
+ "-fdefault-integer-8" flag. In this case the gfortran default integer
+ would be integer*8 while GDB internally still would use a builtin_integer,
+ so an integer of the size of an integer*4 type. On the other hand having
+ GDB print
+
+ (gdb) ptype integer
+ type = integer*4
+
+ makes this clearer. I would still be tempted to fit a variable declared
+ integer in the code into a GDB integer - but at least ptype would
+ directly tell me what is going on. Note, that when debugging a binary
+ compiled with "-fdefault-integer-8" a user will always see the actual
+ underlying type of any variable declared "integer" in the Fortran code.
+ So having the code
+
+ program test
+ integer :: a = 5
+ print *, a ! breakpt
+ end program test
+
+ will, when breaking at breakpt print
+
+ (gdb) ptype var
+ type = integer(kind=4)
+
+ or
+
+ (gdb) ptype var
+ type = integer(kind=8)
+
+ depending on the compiler flag.
+
+ This patch changes the outputs for the REAL and INTEGER default types to
+ actually print the internally used type over the default type name.
+
+ The new behavior for the above examples is:
+
+ (gdb) ptype integer
+ type = integer*4
+ (gdb) ptype integer*4
+ type = integer*4
+
+ Existing testcases have been adapted to reflect the new behavior.
+
+2022-04-11 Nils-Christian Kempke <nils-christian.kempke@intel.com>
+
+ gdb/fortran: clean-up Fortran intrinsic types
+ The currently implemented intrinsic type handling for Fortran missed some
+ tokens and their parsing. While still not all Fortran type kinds are
+ implemented this patch at least makes the currently handled types
+ consistent. As an example for what this patch does, consider the
+ intrinsic type INTEGER. GDB implemented the handling of the
+ keywords "integer" and "integer_2" but missed "integer_4" and "integer_8"
+ even though their corresponding internal types were already available as
+ the Fortran builtin types builtin_integer and builtin_integer_s8.
+ Similar problems applied to LOGICAL, REAL, and COMPLEX. This patch adds
+ all missing tokens and their parsing. Whenever a section containing the
+ type handling was touched, it also was reordered to be in a more easy to
+ grasp order. All INTEGER/REAL/LOGICAL/COMPLEX types were grouped
+ together and ordered ascending in their size making a missing one more
+ easy to spot.
+
+ Before this change GDB would print the following when tyring to use the
+ INTEGER keywords:
+
+ (gdb) set language fortran
+ (gdb) ptype integer*1
+ unsupported kind 1 for type integer
+ (gdb) ptype integer_1
+ No symbol table is loaded. Use the "file" command.
+ (gdb) ptype integer*2
+ type = integer*2
+ (gdb) ptype integer_2
+ type = integer*2
+ (gdb) ptype integer*4
+ type = integer
+ (gdb) ptype integer_4
+ No symbol table is loaded. Use the "file" command.
+ (gdb) ptype integer*8
+ type = integer*8
+ (gdb) ptype integer_8
+ No symbol table is loaded. Use the "file" command.
+ (gdb) ptype integer
+ type = integer
+
+ With this patch all keywords are available and the GDB prints:
+
+ (gdb) set language fortran
+ (gdb) ptype integer*1
+ type = integer*1
+ (gdb) ptype integer_1
+ type = integer*1
+ (gdb) ptype integer*2
+ type = integer*2
+ (gdb) ptype integer_2
+ type = integer*2
+ (gdb) ptype integer*4
+ type = integer*4
+ (gdb) ptype integer_4
+ type = integer*4
+ (gdb) ptype integer*8
+ type = integer*8
+ (gdb) ptype integer_8
+ type = integer*8
+ (gdb) ptype integer
+ type = integer
+
+ The described changes have been applied to INTEGER, REAL, COMPLEX,
+ and LOGICAL. Existing testcases have been adapted to reflect the
+ new behavior. Tests for formerly missing types have been added.
+
+2022-04-11 Nils-Christian Kempke <nils-christian.kempke@intel.com>
+
+ gdb/fortran: change default logical type to builtin_logical
+ According to the Fortran standard, logical is of the size of a
+ 'single numeric storage unit' (just like real and integer). For
+ gfortran, flang and ifx/ifort this storage unit (or the default
+ logical type) is of size kind 4, actually occupying 4 bytes of
+ storage, and so the default type for logical expressions in
+ Fortran should probably also be Logical*4 and not Logical*2. I
+ adapted GDB's behavior to be in line with
+ gfortran/ifort/ifx/flang.
+
+ gdb/fortran: reformat build_fortran_types in f-lang.c
+ Add a few newlines after the type definitions and remove some
+ unnecessary linebreaks.
+
+2022-04-11 Nils-Christian Kempke <nils-christian.kempke@intel.com>
+
+ gdb/fortran: fix complex type in Fortran builtin types
+ Before this patch things like
+
+ (gdb) ptype complex*8
+ complex*16
+ (gdb) ptype complex*4
+ complex*8
+
+ were possible in GDB, which seems confusing for a user. The reason
+ is a mixup in the implementation of the Fortran COMPLEX type. In
+ Fortran the "*X" after a type would normally (I don't think this
+ is language required) specify the type's size in memory. For the
+ COMPLEX type the kind parameters usually (at least for GNU, Intel, Flang)
+ specify not the size of the whole type but the size of the individual
+ two REALs used to form the COMPLEX. Thus, a COMPLEX*4 will usually
+ consist of two REAL*4s. Internally this type was represented by a
+ builtin_complex_s8 - but here I think the s8 actually meant the raw
+ size of the type. This is confusing and I renamed the types (e.g.
+ builting_complex_s8 became builtin_complex_s4 according to its most
+ common useage) and their printed names to their language equivalent.
+ Additionally, I added the default COMPLEX type "COMPLEX" being the same
+ as a COMPLEX*4 (as is normally the case) and removed the latter. I added
+ a few tests for this new behavior as well.
+
+ The new behavior is
+
+ (gdb) ptype complex*8
+ complex*8
+ (gdb) ptype complex*4
+ complex*4
+
+2022-04-11 Nils-Christian Kempke <nils-christian.kempke@intel.com>
+
+ gdb/f-lang: remove hidden ^L characters
+
+ gdb/f-lang: add Integer*1 to Fortran builtin types
+ Add builtin_integer_s1 of size TARGET_CHAR_BIT to Fortran builtin types.
+
+2022-04-11 Tom de Vries <tdevries@suse.de>
+
+ [gdb/testsuite] Fix gdb.base/annota1.exp with pie
+ Since commit 359efc2d894 ("[gdb/testsuite] Make gdb.base/annota1.exp more
+ robust") we see this fail with target board unix/-fPIE/-pie:
+ ...
+ FAIL: gdb.base/annota1.exp: run until main breakpoint (timeout)
+ ...
+
+ The problem is that the commit makes the number and order of matched
+ annotations fixed, while between target boards unix and unix/-fPIE/-pie there
+ is a difference:
+ ...
+ \032\032post-prompt
+ Starting program: outputs/gdb.base/annota1/annota1
+
+ +\032\032breakpoints-invalid
+ +
+ \032\032starting
+
+ \032\032frames-invalid
+ ...
+
+ Fix this by optionally matching the additional annotation.
+
+ Tested on x86_64-linux.
+
+2022-04-11 Tom de Vries <tdevries@suse.de>
+
+ [gdb/testsuite] Fix gdb.dwarf2/dw2-lines.exp for m32 pie
+ As reported in PR29043, when running test-case gdb.dwarf2/dw2-lines.exp with
+ target board unix/-m32/-fPIE/-pie, we run into:
+ ...
+ Breakpoint 2, 0x56555540 in bar ()^M
+ (gdb) PASS: gdb.dwarf2/dw2-lines.exp: cv=2: cdw=32: lv=2: ldw=32: \
+ continue to breakpoint: foo \(1\)
+ next^M
+ Single stepping until exit from function bar,^M
+ which has no line number information.^M
+ 0x56555587 in main ()^M
+ (gdb) FAIL: gdb.dwarf2/dw2-lines.exp: cv=2: cdw=32: lv=2: ldw=32: \
+ next to foo (2)
+ ...
+
+ The problem is that the bar breakpoint ends up at an unexpected location
+ because:
+ - the synthetic debug info is incomplete and doesn't provide line info
+ for the prologue part of the function, so consequently gdb uses the i386
+ port prologue skipper to get past the prologue
+ - the i386 port prologue skipper doesn't get past a get_pc_thunk call.
+
+ Work around this in the test-case by breaking on bar_label instead.
+
+ Tested on x86_64-linux with target boards unix, unix/-m32, unix/-fPIE/-pie and
+ unix/-m32/-fPIE/-pie.
+
+2022-04-11 GDB Administrator <gdbadmin@sourceware.org>
+
+ Automatic date update in version.in
+
+2022-04-10 GDB Administrator <gdbadmin@sourceware.org>
+
+ Automatic date update in version.in
+
+2022-04-09 Tom Tromey <tom@tromey.com>
+
+ Remove MSYMBOL_VALUE_CHAIN
+ I noticed that MSYMBOL_VALUE_CHAIN is unused, so this patch removes it.
+
+2022-04-09 Alan Modra <amodra@gmail.com>
+
+ Rearrange struct bfd_section a little
+ For better packing on 64-bit hosts.
+
+ * section.c (struct bfd_section): Move next and prev field earlier.
+ Move alignment_power later.
+ (BFD_FAKE_SECTION): Adjust to suit.
+ * bfd-in2.h: Regenerate.
+
+2022-04-09 Alan Modra <amodra@gmail.com>
+
+ Don't run pr27228 test for hppa
+ As the comment says, hppa doesn't support use of BFD_RELOC_* in
+ .reloc directives. Using xfail can result in a spurious XPASS result
+ as BFD_RELOC values change.
+
+ * testsuite/gas/elf/pr27228.d: Change xfail to notarget for hppa.
+
+2022-04-09 Alan Modra <amodra@gmail.com>
+
+ Correct nds32 readelf reloc numbers
+ * readelf.c (is_32bit_abs_reloc, is_16bit_abs_reloc): Comment fixes.
+ (is_none_reloc): Correct nds32 reloc numbers.
+
+2022-04-09 GDB Administrator <gdbadmin@sourceware.org>
+
+ Automatic date update in version.in
+
+2022-04-08 Fangrui Song <i@maskray.me>
+
+ gas: Port "copy st_size only if unset" to aarch64 and riscv
+ And disable the new test gas/elf/size.s for alpha which uses its own
+ .set, for hppa*-*-hpux* which does not allow .size before declaration.
+
+2022-04-08 Vladimir Mezentsev <vladimir.mezentsev@oracle.com>
+
+ gprofng: fprintf_styled_func not inizialized for disassembler
+ gprofng/ChangeLog
+ 2022-04-07 Vladimir Mezentsev <vladimir.mezentsev@oracle.com>
+
+ * libcollector/unwind.c: inizialize fprintf_styled_func.
+ * src/Disasm.cc: Likewise.
+
+2022-04-08 Vladimir Mezentsev <vladimir.mezentsev@oracle.com>
+
+ gprofng: zlib handling
+ gprofng/ChangeLog
+ 2022-04-06 Vladimir Mezentsev <vladimir.mezentsev@oracle.com>
+
+ * configure.ac: Add AM_ZLIB.
+ * src/Makefile.am: Add $(ZLIBINC) and $(ZLIB).
+ * gprofng/src/DbeSession.h: Likewise.
+ * configure: Regenerate.
+ * Makefile.in: Regenerate.
+ * doc/Makefile.in: Regenerate.
+ * gp-display-html/Makefile.in: Regenerate.
+ * src/Makefile.in: Regenerate.
+
+2022-04-08 Pedro Alves <pedro@palves.net>
+
+ gdb: Avoid undefined shifts, fix Go shifts
+ I noticed that a build of GDB with GCC + --enable-ubsan, testing
+ against GDBserver showed this GDB crash:
+
+ (gdb) PASS: gdb.trace/trace-condition.exp: trace: 0x00abababcdcdcdcd << 46 == 0x7373400000000000: advance to trace begin
+ tstart
+ ../../src/gdb/valarith.c:1365:15: runtime error: left shift of 48320975398096333 by 46 places cannot be represented in type 'long int'
+ ERROR: GDB process no longer exists
+ GDB process exited with wait status 269549 exp9 0 1
+ UNRESOLVED: gdb.trace/trace-condition.exp: trace: 0x00abababcdcdcdcd << 46 == 0x7373400000000000: start trace experiment
+
+ The problem is that, "0x00abababcdcdcdcd << 46" is an undefined signed
+ left shift, because the result is not representable in the type of the
+ lhs, which is signed. This actually became defined in C++20, and if
+ you compile with "g++ -std=c++20 -Wall", you'll see that GCC no longer
+ warns about it, while it warns if you specify prior language versions.
+
+ While at it, there are a couple other situations that are undefined
+ (and are still undefined in C++20) and result in GDB dying: shifting
+ by a negative ammount, or by >= than the bit size of the promoted lhs.
+ For the latter, GDB shifts using (U)LONGEST internally, so you have to
+ shift by >= 64 bits to see it:
+
+ $ gdb --batch -q -ex "p 1 << -1"
+ ../../src/gdb/valarith.c:1365:15: runtime error: shift exponent -1 is negative
+ $ # gdb exited
+
+ $ gdb --batch -q -ex "p 1 << 64"
+ ../../src/gdb/valarith.c:1365:15: runtime error: shift exponent 64 is too large for 64-bit type 'long int'
+ $ # gdb exited
+
+ Also, right shifting a negative value is implementation-defined
+ (before C++20, after which it is defined). For this, I chose to
+ change nothing in GDB other than adding tests, as I don't really know
+ whether we need to do anything. AFAIK, most implementations do an
+ arithmetic right shift, and it may be we don't support any host or
+ target that behaves differently. Plus, this becomes defined in C++20
+ exactly as arithmetic right shift.
+
+ Compilers don't error out on such shifts, at best they warn, so I
+ think GDB should just continue doing the shifts anyhow too.
+
+ Thus:
+
+ - Adjust scalar_binop to avoid the undefined paths, either by adding
+ explicit result paths, or by casting the lhs of the left shift to
+ unsigned, as appropriate.
+
+ For the shifts by a too-large count, I made the result be what you'd
+ get if you split the large count in a series of smaller shifts.
+ Thus:
+
+ Left shift, positive or negative lhs:
+
+ V << 64
+ => V << 16 << 16 << 16 << 16
+ => 0
+
+ Right shift, positive lhs:
+
+ Vpos >> 64
+ => Vpos >> 16 >> 16 >> 16 >> 16
+ => 0
+
+ Right shift, negative lhs:
+
+ Vneg >> 64
+ => Vneg >> 16 >> 16 >> 16 >> 16
+ => -1
+
+ This is actually Go's semantics (the compiler really emits
+ instructions to make it so that you get 0 or -1 if you have a
+ too-large shift). So for that language GDB does the shift and
+ nothing else. For other C-like languages where such a shift is
+ undefined, GDB warns in addition to performing the shift.
+
+ For shift by a negative count, for Go, this is a hard error. For
+ other languages, since their compilers only warn, I made GDB warn
+ too. The semantics I chose (we're free to pick them since this is
+ undefined behavior) is as-if you had shifted by the count cast to
+ unsigned, thus as if you had shifted by a too-large count, thus the
+ same as the previous scenario illustrated above.
+
+ Examples:
+
+ (gdb) set language go
+ (gdb) p 1 << 100
+ $1 = 0
+ (gdb) p -1 << 100
+ $2 = 0
+ (gdb) p 1 >> 100
+ $3 = 0
+ (gdb) p -1 >> 100
+ $4 = -1
+ (gdb) p -2 >> 100
+ $5 = -1
+ (gdb) p 1 << -1
+ left shift count is negative
+
+ (gdb) set language c
+ (gdb) p -2 >> 100
+ warning: right shift count >= width of type
+ $6 = -1
+ (gdb) p -2 << 100
+ warning: left shift count >= width of type
+ $7 = 0
+ (gdb) p 1 << -1
+ warning: left shift count is negative
+ $8 = 0
+ (gdb) p -1 >> -1
+ warning: right shift count is negative
+ $9 = -1
+
+ - The warnings' texts are the same as what GCC prints.
+
+ - Add comprehensive tests in a new gdb.base/bitshift.exp testcase, so
+ that we exercise all these scenarios.
+
+ Change-Id: I8bcd5fa02de3114b7ababc03e65702d86ec8d45d
+
+2022-04-08 Pedro Alves <pedro@palves.net>
+
+ Fix undefined behavior in the Fortran, Go and Pascal number parsers
+ This commit ports these two fixes to the C parser:
+
+ commit ebf13736b42af47c9907b5157c8e80c78dbe00e1
+ CommitDate: Thu Sep 4 21:46:28 2014 +0100
+
+ parse_number("0") reads uninitialized memory
+
+ commit 20562150d8a894bc91657c843ee88c508188e32e
+ CommitDate: Wed Oct 3 15:19:06 2018 -0600
+
+ Avoid undefined behavior in parse_number
+
+ ... to the Fortran, Go, and Fortran number parsers, fixing the same
+ problems there.
+
+ Also add a new testcase that exercises printing 0xffffffffffffffff
+ (max 64-bit) in all languages, which crashes a GDB built with UBsan
+ without the fix.
+
+ I moved get_set_option_choices out of all-architectures.exp.tcl to
+ common code to be able to extract all the supported languages. I did
+ a tweak to it to generalize it a bit -- you now have to pass down the
+ "set" part of the command as well. This is so that the proc can be
+ used with "maintenance set" commands as well in future.
+
+ Change-Id: I8e8f2fdc1e8407f63d923c26fd55d98148b9e16a
+
+2022-04-08 Nick Clifton <nickc@redhat.com>
+
+ Debug info for function in Windows PE binary on wrong instruction
+ PR 29038
+ * coffgen.c (coff_find_nearest_line_with_names): Fix typo
+ retrieving saved bias.
+
+2022-04-08 Simon Marchi <simon.marchi@efficios.com>
+
+ Pass PKG_CONFIG_PATH down from top-level Makefile
+ [Sending to binutils, gdb-patches and gcc-patches, since it touches the
+ top-level Makefile/configure]
+
+ I have my debuginfod library installed in a non-standard location
+ (/opt/debuginfod), which requires me to set
+ PKG_CONFIG_PATH=/opt/debuginfod/lib/pkg-config. If I just set it during
+ configure:
+
+ $ PKG_CONFIG_PATH=/opt/debuginfod/lib/pkg-config ./configure --with-debuginfod
+ $ make
+
+ or
+
+ $ ./configure --with-debuginfod PKG_CONFIG_PATH=/opt/debuginfod/lib/pkg-config
+ $ make
+
+ Then PKG_CONFIG_PATH is only present (and ignored) during the top-level
+ configure. When running make (which runs gdb's and binutils'
+ configure), PKG_CONFIG_PATH is not set, which results in their configure
+ script not finding the library:
+
+ checking for libdebuginfod >= 0.179... no
+ configure: error: "--with-debuginfod was given, but libdebuginfod is missing or unusable."
+
+ Change the top-level configure/Makefile system to capture the value
+ passed when configuring the top-level and pass it down to
+ subdirectories (similar to CFLAGS, LDFLAGS, etc).
+
+ I don't know much about the top-level build system, so I really don't
+ know if I did this correctly. The changes are:
+
+ - Use AC_SUBST(PKG_CONFIG_PATH) in configure.ac, so that
+ @PKG_CONFIG_PATH@ gets replaced with the actual PKG_CONFIG_PATH value
+ in config files (i.e. Makefile)
+ - Add a PKG_CONFIG_PATH Makefile variable in Makefile.tpl, initialized
+ to @PKG_CONFIG_PATH@
+ - Add PKG_CONFIG_PATH to HOST_EXPORTS in Makefile.tpl, which are the
+ variables set when running the sub-configures
+
+ I initially added PKG_CONFIG_PATH to flags_to_pass, in Makefile.def, but
+ I don't think it's needed. AFAIU, this defines the flags to pass down
+ when calling "make" in subdirectories. We only need PKG_CONFIG_PATH to
+ be passed down during configure. After that, it's captured in
+ gdb/config.status, so even if a "make" causes a re-configure later
+ (because gdb/configure has changed, for example), the PKG_CONFIG_PATH
+ value will be remembered.
+
+ ChangeLog:
+
+ * configure.ac: Add AC_SUBST(PKG_CONFIG_PATH).
+ * configure: Re-generate.
+ * Makefile.tpl (HOST_EXPORTS): Pass PKG_CONFIG_PATH.
+ (PKG_CONFIG_PATH): New.
+ * Makefile.in: Re-generate.
+
+ Change-Id: I91138dfca41c43b05e53e445f62e4b27882536bf
+
+2022-04-08 Simon Marchi <simon.marchi@efficios.com>
+
+ gdb/testsuite: use nopie in gdb.dwarf2/dw2-inline-param.exp
+ I see this failure:
+
+ (gdb) run ^M
+ Starting program: /home/smarchi/build/binutils-gdb/gdb/testsuite/outputs/gdb.dwarf2/dw2-inline-param/dw2-inline-param ^M
+ Warning:^M
+ Cannot insert breakpoint 1.^M
+ Cannot access memory at address 0x113b^M
+ ^M
+ (gdb) FAIL: gdb.dwarf2/dw2-inline-param.exp: runto: run to *0x113b
+
+ The test loads the binary in GDB, grabs the address of a symbol, strips
+ the binary, reloads it in GDB, runs the program, and then tries to place
+ a breakpoint at that address. The problem is that the binary is built
+ as position independent, so the address GDB grabs in the first place
+ isn't where the code ends up after running.
+
+ Fix this by linking the binary as non-position-independent. The
+ alternative would be to compute the relocated address where to place the
+ breakpoint, but that's not very straightforward, unfortunately.
+
+ I was confused for a while, I was trying to load the binary in GDB
+ manually to get the symbol address, but GDB was telling me the symbol
+ could not be found. Meanwhile, it clearly worked in gdb.log. The thing
+ is that GDB strips the binary in-place, so we don't have access to the
+ intermediary binary with symbols. Change the test to output the
+ stripped binary to a separate file instead.
+
+ Change-Id: I66c56293df71b1ff49cf748d6784bd0e935211ba
+
+2022-04-08 Alan Modra <amodra@gmail.com>
+
+ gdb maintainer commit rights
+ Formalise what ought to be obvious. The top level of the binutils-gdb
+ repository isn't owned by binutils.
+
+ * MAINTAINERS: Spelling fix. GDB global maintainer rights.
+
+2022-04-08 Bernhard Heckel <bernhard.heckel@intel.com>
+ Nils-Christian Kempke <nils-christian.kempke@intel.com>
+
+ gdb/fortran: print fortran extended types with ptype
+ Add the print of the base-class of an extended type to the output of
+ ptype. This requires the Fortran compiler to emit DW_AT_inheritance
+ for the extended type.
+
+2022-04-08 Bernhard Heckel <bernhard.heckel@intel.com>
+ Nils-Christian Kempke <nils-christian.kempke@intel.com>
+
+ gdb/fortran: add support for accessing fields of extended types
+ Fortran 2003 supports type extension. This patch allows access
+ to inherited members by using their fully qualified name as described
+ in the Fortran standard.
+
+ In doing so the patch also fixes a bug in GDB when trying to access the
+ members of a base class in a derived class via the derived class' base
+ class member.
+
+ This patch fixes PR22497 and PR26373 on GDB side.
+
+ Using the example Fortran program from PR22497
+
+ program mvce
+ implicit none
+
+ type :: my_type
+ integer :: my_int
+ end type my_type
+
+ type, extends(my_type) :: extended_type
+ end type extended_type
+
+ type(my_type) :: foo
+ type(extended_type) :: bar
+
+ foo%my_int = 0
+ bar%my_int = 1
+
+ print*, foo, bar
+
+ end program mvce
+
+ and running this with GDB and setting a BP at 17:
+
+ Before:
+ (gdb) p bar%my_type
+ A syntax error in expression, near `my_type'.
+ (gdb) p bar%my_int
+ There is no member named my_int.
+ (gdb) p bar%my_type%my_int
+ A syntax error in expression, near `my_type%my_int'.
+ (gdb) p bar
+ $1 = ( my_type = ( my_int = 1 ) )
+
+ After:
+ (gdb) p bar%my_type
+ $1 = ( my_int = 1 )
+ (gdb) p bar%my_int
+ $2 = 1 # this line requires DW_TAG_inheritance to work
+ (gdb) p bar%my_type%my_int
+ $3 = 1
+ (gdb) p bar
+ $4 = ( my_type = ( my_int = 1 ) )
+
+ In the above example "p bar%my_int" requires the compiler to emit
+ information about the inheritance relationship between extended_type
+ and my_type which gfortran and flang currently do not de. The
+ respective issue gcc/49475 has been put as kfail.
+
+ Bug: https://sourceware.org/bugzilla/show_bug.cgi?id=26373
+ https://sourceware.org/bugzilla/show_bug.cgi?id=22497
+
+2022-04-08 Nils-Christian Kempke <nils-christian.kempke@intel.com>
+
+ gdb: add Nils-Christian Kempke to gdb/MAINTAINERS
+
+2022-04-08 Simon Marchi <simon.marchi@polymtl.ca>
+
+ gdb: change file_file_name to return an std::string
+ Straightforward change, return an std::string instead of a
+ gdb::unique_xmalloc_ptr<char>. No behavior change expected.
+
+ Change-Id: Ia5e94c94221c35f978bb1b7bdffbff7209e0520e
+
+2022-04-08 GDB Administrator <gdbadmin@sourceware.org>
+
+ Automatic date update in version.in
+
+2022-04-07 Andrew Burgess <aburgess@redhat.com>
+
+ gdb/fortran: fix fetching assumed rank array content
+ Commit:
+
+ commit df7a7bdd9766adebc6b117c31bc617d81c1efd43
+ Date: Thu Mar 17 18:56:23 2022 +0000
+
+ gdb: add support for Fortran's ASSUMED RANK arrays
+
+ Added support for Fortran assumed rank arrays. Unfortunately, this
+ commit contained a bug that means though GDB can correctly calculate
+ the rank of an assumed rank array, GDB can't fetch the contents of an
+ assumed rank array.
+
+ The history of this patch can be seen on the mailing list here:
+
+ https://sourceware.org/pipermail/gdb-patches/2022-January/185306.html
+
+ The patches that were finally committed can be found here:
+
+ https://sourceware.org/pipermail/gdb-patches/2022-March/186906.html
+
+ The original patches did support fetching the array contents, it was
+ only the later series that introduced the regression.
+
+ The problem is that when calculating the array rank the result is a
+ count of the number of ranks, i.e. this is a 1 based result, 1, 2, 3,
+ etc.
+
+ In contrast, when computing the details of any particular rank the
+ value passed to the DWARF expression evaluator should be a 0 based
+ rank offset, i.e. a 0 based number, 0, 1, 2, etc.
+
+ In the patches that were originally merged, this was not the case, and
+ we were passing the 1 based rank number to the expression evaluator,
+ e.g. passing 1 when we should pass 0, 2 when we should pass 1, etc.
+ As a result the DWARF expression evaluator was reading the
+ wrong (undefined) memory, and returning garbage results.
+
+ In this commit I have extended the test case to cover checking the
+ array contents, I've then ensured we make use of the correct rank
+ value, and extended some comments, and added or adjusted some asserts
+ as appropriate.
+
+2022-04-07 Simon Marchi <simon.marchi@efficios.com>
+
+ gdb/testsuite: add "macros" option to gdb_compile
+ Make gdb_compile handle a new "macros" option, which makes it pass the
+ appropriate flag to make the compiler include macro information in the
+ debug info. This will help simplify tests using macros, reduce
+ redundant code, and make it easier to add support for a new compiler.
+
+ Right now it only handles clang specially (using -fdebug-macro) and
+ falls back to -g3 otherwise (which works for gcc). Other compilers can
+ be added as needed.
+
+ There are some tests that are currently skipped if the compiler is nor
+ gcc nor clang. After this patch, the tests will attempt to run (the -g3
+ fall back will be used). That gives a chance to people using other
+ compilers to notice something is wrong and maybe add support for their
+ compiler. If it is needed to support a compiler that doesn't have a way
+ to include macro information, then we can always introduce a
+ "skip_macro_tests" that can be used to skip over them.
+
+ Change-Id: I50cd6ab1bfbb478c1005486408e214b551364c9b
+
+2022-04-07 Simon Marchi <simon.marchi@polymtl.ca>
+
+ gdb: remove subfile::buildsym_compunit field
+ It is only set, never used.
+
+ Change-Id: Ia46ed2f9da243b0ccfc4588c1b57be2a0f3939de
+
+2022-04-07 Tom de Vries <tdevries@suse.de>
+
+ [gdb/testsuite] Make gdb.base/annota1.exp more robust
+ On openSUSE Tumbleweed I run into:
+ ...
+ FAIL: gdb.base/annota1.exp: run until main breakpoint (timeout)
+ ...
+
+ The problem is that the libthread_db message occurs at a location where it's
+ not expected:
+ ...
+ Starting program: outputs/gdb.base/annota1/annota1 ^M
+ ^M
+ ^Z^Zstarting^M
+ ^M
+ ^Z^Zframes-invalid^M
+ [Thread debugging using libthread_db enabled]^M
+ Using host libthread_db library "/lib64/libthread_db.so.1".^M
+ ^M
+ ^Z^Zbreakpoints-invalid^M
+ ^M
+ ...
+
+ Fix this by making the matching more robust:
+ - rewrite the regexp such that each annotation is on a single line,
+ starting with \r\n\032\032 and ending with \r\n
+ - add a regexp variable optional_re, that matches all possible optional
+ output, and use it as a separator in the first part of the regexp
+
+ Tested on x86_64-linux.
+
+2022-04-07 Simon Marchi <simon.marchi@polymtl.ca>
+
+ gdb/testsuite/dwarf: simplify line number program syntax
+ By calling `uplevel $body` in the program proc (a pattern we use at many
+ places), we can get rid of curly braces around each line number program
+ directive. That seems like a nice small improvement to me.
+
+ Change-Id: Ib327edcbffbd4c23a08614adee56c12ea25ebc0b
+
+2022-04-07 Simon Marchi <simon.marchi@polymtl.ca>
+
+ gdb/testsuite/dwarf: remove two unused variables
+ These variables seem to be unused, remove them.
+
+ Change-Id: I7d613d9d35735930ee78b2c348943c73a702afbb
+
+2022-04-07 Simon Marchi <simon.marchi@polymtl.ca>
+
+ gdb: remove symtab::pspace
+ Same idea as previous patch, but for symtab::pspace.
+
+ Change-Id: I1023abe622bea75ef648c6a97a01b53775d4104d
+
+2022-04-07 Simon Marchi <simon.marchi@polymtl.ca>
+
+ gdb: remove symtab::objfile
+ Same idea as previous patch, but for symtab::objfile. I find
+ it clearer without this wrapper, as it shows that the objfile is
+ common to all symtabs of a given compunit. Otherwise, you could think
+ that each symtab (of a given compunit) can have a specific objfile.
+
+ Change-Id: Ifc0dbc7ec31a06eefa2787c921196949d5a6fcc6
+
+2022-04-07 Simon Marchi <simon.marchi@polymtl.ca>
+
+ gdb: remove symtab::blockvector
+ symtab::blockvector is a wrapper around compunit_symtab::blockvector.
+ It is a bit misleadnig, as it gives the impression that a symtab has a
+ blockvector. Remove it, change all users to fetch the blockvector
+ through the compunit instead.
+
+ Change-Id: Ibd062cd7926112a60d52899dff9224591cbdeebf
+
+2022-04-07 Simon Marchi <simon.marchi@efficios.com>
+
+ gdb: remove symtab::dirname
+ I think the symtab::dirname method is bogus, or at least very
+ misleading. It makes you think that it returns the directory that was
+ used to find that symtab's file during compilation (i.e. the directory
+ the file refers to in the DWARF line header file table), or the
+ directory part of the symtab's filename maybe. In fact, it returns the
+ compilation unit's directory, which is the CWD of the compiler, at
+ compilation time. At least for DWARF, if the symtab's filename is
+ relative, it will be relative to that directory. But if the symtab's
+ filename is absolute, then the directory returned by symtab::dirname has
+ nothing to do with the symtab's filename.
+
+ Remove symtab::dirname to avoid this confusion, change all users to
+ fetch the same information through the compunit. At least, it will be
+ clear that this is a compunit property, not a symtab property.
+
+ Change-Id: I2894c3bf3789d7359a676db3c58be2c10763f5f0
+
+2022-04-07 Simon Marchi <simon.marchi@polymtl.ca>
+
+ gdb/testsuite: make gdb_breakpoint and runto take a linespec
+ Change gdb_breakpoint to accept a linespec, not just a function. In
+ fact, no behavior changes are necessary, this only changes the parameter
+ name and documentation. Change runto as well, since the two are so
+ close (runto forwards all its arguments to gdb_breakpoint).
+
+ I wrote this for a downstrean GDB port, but thought it could be
+ useful upstream, eventually, even though not callers take advantage of
+ it yet.
+
+ Change-Id: I08175fd444d5a60df90fd9985e1b5dfd87c027cc
+
+2022-04-07 Andrew Burgess <aburgess@redhat.com>
+
+ gdb: update comments throughout reggroups.{c,h} files
+ This commit updates the comments in the gdb/reggroups.{c,h} files.
+ Fill in some missing comments, correct a few comments that were not
+ clear, and where we had comments duplicated between .c and .h files,
+ update the .c to reference the .h.
+
+ No user visible changes after this commit.
+
+2022-04-07 Andrew Burgess <aburgess@redhat.com>
+
+ gdb: move struct reggroup into reggroups.h header
+ Move 'struct reggroup' into the reggroups.h header. Remove the
+ reggroup_name and reggroup_type accessor functions, and just use the
+ name/type member functions within 'struct reggroup', update all uses
+ of these removed functions.
+
+ There should be no user visible changes after this commit.
+
+2022-04-07 Andrew Burgess <aburgess@redhat.com>
+
+ gdb: convert reggroup to a C++ class with constructor, etc
+ Convert the 'struct reggroup' into a real class, with a constructor
+ and getter methods.
+
+ There should be no user visible changes after this commit.
+
+2022-04-07 Andrew Burgess <aburgess@redhat.com>
+
+ gdb: make the pre-defined register groups const
+ Convert the 7 global, pre-defined, register groups const, and fix the
+ fall out (a minor tweak required in riscv-tdep.c).
+
+ There should be no user visible changes after this commit.
+
+2022-04-07 Andrew Burgess <aburgess@redhat.com>
+
+ gdb: more 'const' in gdb/reggroups.{c,h}
+ Convert the reggroup_new and reggroup_gdbarch_new functions to return
+ a 'const regggroup *', and fix up all the fallout.
+
+ There should be no user visible changes after this commit.
+
+2022-04-07 Andrew Burgess <aburgess@redhat.com>
+
+ gdb: remove reggroup_next and reggroup_prev
+ Add a new function gdbarch_reggroups that returns a reference to a
+ vector containing all the reggroups for an architecture.
+
+ Make use of this function throughout GDB instead of the existing
+ reggroup_next and reggroup_prev functions.
+
+ Finally, delete the reggroup_next and reggroup_prev functions.
+
+ Most of these changes are pretty straight forward, using range based
+ for loops instead of the old style look using reggroup_next. There
+ are two places where the changes are less straight forward.
+
+ In gdb/python/py-registers.c, the register group iterator needed to
+ change slightly. As the iterator is tightly coupled to the gdbarch, I
+ just fetch the register group vector from the gdbarch when needed, and
+ use an index counter to find the next item from the vector when
+ needed.
+
+ In gdb/tui/tui-regs.c the tui_reg_next and tui_reg_prev functions are
+ just wrappers around reggroup_next and reggroup_prev respectively.
+ I've just inlined the logic of the old functions into the tui
+ functions. As the tui function had its own special twist (wrap around
+ behaviour) I think this is OK.
+
+ There should be no user visible changes after this commit.
+
+2022-04-07 Andrew Burgess <aburgess@redhat.com>
+
+ gdb: convert reggroups to use a std::vector
+ Replace manual linked list with a std::vector. This commit doesn't
+ change the reggroup_next and reggroup_prev API, but that will change
+ in a later commit.
+
+ This commit is focused on the minimal changes needed to manage the
+ reggroups using a std::vector, without changing the API exposed by the
+ reggroup.c file.
+
+ There should be no user visible changes after this commit.
+
+2022-04-07 Andrew Burgess <aburgess@redhat.com>
+
+ gdb: always add the default register groups
+ There's a set of 7 default register groups. If we don't add any
+ gdbarch specific register groups during gdbarch initialisation, then
+ when we iterate over the register groups using reggroup_next and
+ reggroup_prev we will make use of these 7 default groups. See the use
+ of default_groups in gdb/reggroups.c for details on this.
+
+ However, if the gdbarch adds its own groups during gdbarch
+ initialisation, then these groups will be used in preference to the
+ default groups.
+
+ A problem arises though if the particular architecture makes use of
+ the target description mechanism. If the default target
+ description(s) (i.e. those internal to GDB that are used when the user
+ doesn't provide their own) don't mention any additional register
+ groups then the default register groups will be used.
+
+ But if the target description does mention additional groups then the
+ default groups are not used, and instead, the groups from the target
+ description are used.
+
+ The problem with this is that what usually happens is that the target
+ description will mention additional groups, e.g. groups for special
+ registers. Most architectures that use target descriptions work
+ around this by adding all (or most) of the default register groups in
+ all cases. See i386_add_reggroups, aarch64_add_reggroups,
+ riscv_add_reggroups, xtensa_add_reggroups, and others.
+
+ In this patch, my suggestion is that we should just add the default
+ register groups for every architecture, always. This change is in
+ gdb/reggroups.c.
+
+ All the remaining changes are me updating the various architectures to
+ not add the default groups themselves.
+
+ So, where will this change be visible to the user? I think the
+ following commands will possibly change:
+
+ * info registers / info all-registers:
+
+ The user can provide a register group to these commands. For example,
+ on csky, we previously never added the 'vector' group. Now, as a
+ default group, this will be available, but (presumably) will not
+ contain any registers. I don't think this is necessarily a bad
+ thing, there's something to be said for having some consistent
+ defaults available. There are other architectures that didn't add
+ all 7 of the defaults, which will now have gained additional groups.
+
+ * maint print reggroups
+
+ This prints the set of all available groups. As a maintenance
+ command I'm less concerned with the output changing here.
+ Obviously, for the architectures that didn't previously add all the
+ defaults, this list just got bigger.
+
+ * maint print register-groups
+
+ This prints all the registers, and the groups they are in. If the
+ defaults were not previously being added then a register (obviously)
+ can't appear in one of the default groups. Now the groups are
+ available then registers might be in more groups than previously.
+ However, this is again a maintenance command, so I'm less concerned
+ about this changing.
+
+2022-04-07 Andrew Burgess <aburgess@redhat.com>
+
+ gdb/tui: fix 'tui reg next/prev' command when data window is hidden
+ Start GDB like:
+
+ $ gdb -q executable
+ (gdb) start
+ (gdb) layout src
+ ... tui windows are now displayed ...
+ (gdb) tui reg next
+
+ At this point the data (register) window should be displayed, but will
+ contain the message 'Register Values Unavailable', and at the console
+ you'll see the message "unknown register group 'next'".
+
+ The same happens with 'tui reg prev' (but the error message is
+ slightly different).
+
+ At this point you can continue to use 'tui reg next' and/or 'tui reg
+ prev' and you'll keep getting the error message.
+
+ The problem is that when the data (register) window is first
+ displayed, it's current register group is nullptr. As a consequence
+ tui_reg_next and tui_reg_prev (tui/tui-regs.c) will always just return
+ nullptr, which triggers an error in tui_reg_command.
+
+ In this commit I change tui_reg_next and tui_reg_prev so that they
+ instead return the first and last register group respectively if the
+ current register group is nullptr.
+
+ So, after this, using 'tui reg next' will (in the above case) show the
+ first register group, while 'tui reg prev' will display the last
+ register group.
+
+2022-04-07 Andrew Burgess <aburgess@redhat.com>
+
+ gdb/tui: avoid theoretical bug with 'tui reg' command
+ While looking at the 'tui reg' command as part of another patch, I
+ spotted a theoretical bug.
+
+ The 'tui reg' command takes the name of a register group, but also
+ handles partial register group matches, though the partial match has to
+ be unique. The current command logic goes:
+
+ With the code as currently written, if a target description named a
+ register group either 'prev' or 'next' then GDB would see this as an
+ ambiguous register name, and refuse to switch groups.
+
+ Naming a register group 'prev' or 'next' seems pretty unlikely, but,
+ by adding a single else block we can prevent this problem.
+
+ Now, if there's a 'prev' or 'next' register group, the user will not
+ be able to select the group directly, the 'prev' and 'next' names will
+ always iterate through the available groups instead. But at least the
+ user could select their groups by iteration, rather than direct
+ selection.
+
+2022-04-07 Andrew Burgess <aburgess@redhat.com>
+
+ gdb: have reggroup_find return a const
+ Update reggroup_find to return a const reggroup *.
+
+ There are other function in gdb/reggroup.{c,h} files that could
+ benefit from returning const, these will be updated in later commits.
+
+ There should be no user visible changes after this commit.
+
+2022-04-07 Andrew Burgess <aburgess@redhat.com>
+
+ gdb: use 'const reggroup *' in python/py-registers.c file
+ Convert uses of 'struct reggroup *' in python/py-registers.c to be
+ 'const'.
+
+ There should be no user visible changes after this commit.
+
+2022-04-07 Andrew Burgess <aburgess@redhat.com>
+
+ gdb: switch to using 'const reggroup *' in tui-regs.{c,h}
+ Make uses of 'reggroup *' const throughout tui-regs.{c,h}.
+
+ There should be no user visible changes after this commit.
+
+2022-04-07 Andrew Burgess <aburgess@redhat.com>
+
+ gdb: make gdbarch_register_reggroup_p take a const reggroup *
+ Change gdbarch_register_reggroup_p to take a 'const struct reggroup *'
+ argument. This requires a change to the gdb/gdbarch-components.py
+ script, regeneration of gdbarch.{c,h}, and then updates to all the
+ architectures that implement this method.
+
+ There should be no user visible changes after this commit.
+
+2022-04-07 Andrew Burgess <aburgess@redhat.com>
+
+ gdb: add some const in gdb/reggroups.c
+ This commit makes the 'struct reggroup *' argument const for the
+ following functions:
+
+ reggroup_next
+ reggroup_prev
+ reggroup_name
+ reggroup_type
+
+ There are other places that could benefit from const in the
+ reggroup.{c,h} files, but these will be changing in further commits.
+
+ There should be no user visible changes after this commit.
+
+2022-04-07 Andrew Burgess <aburgess@redhat.com>
+
+ gdb: don't try to use readline before it's initialized
+ While working on a different patch, I triggered an assertion from the
+ initialize_current_architecture code, specifically from one of
+ the *_gdbarch_init functions in a *-tdep.c file. This exposes a
+ couple of issues with GDB.
+
+ This is easy enough to reproduce by adding 'gdb_assert (false)' into a
+ suitable function. For example, I added a line into i386_gdbarch_init
+ and can see the following issue.
+
+ I start GDB and immediately hit the assert, the output is as you'd
+ expect, except for the very last line:
+
+ $ ./gdb/gdb --data-directory ./gdb/data-directory/
+ ../../src.dev-1/gdb/i386-tdep.c:8455: internal-error: i386_gdbarch_init: Assertion `false' failed.
+ A problem internal to GDB has been detected,
+ further debugging may prove unreliable.
+ ----- Backtrace -----
+ ... snip ...
+ ---------------------
+ ../../src.dev-1/gdb/i386-tdep.c:8455: internal-error: i386_gdbarch_init: Assertion `false' failed.
+ A problem internal to GDB has been detected,
+ further debugging may prove unreliable.
+ Quit this debugging session? (y or n) ../../src.dev-1/gdb/ser-event.c:212:16: runtime error: member access within null pointer of type 'struct serial'
+
+ Something goes wrong when we try to query the user. Note, I
+ configured GDB with --enable-ubsan, I suspect that without this the
+ above "error" would actually just be a crash.
+
+ The backtrace from ser-event.c:212 looks like this:
+
+ (gdb) bt 10
+ #0 serial_event_clear (event=0x675c020) at ../../src/gdb/ser-event.c:212
+ #1 0x0000000000769456 in invoke_async_signal_handlers () at ../../src/gdb/async-event.c:211
+ #2 0x000000000295049b in gdb_do_one_event () at ../../src/gdbsupport/event-loop.cc:194
+ #3 0x0000000001f015f8 in gdb_readline_wrapper (
+ prompt=0x67135c0 "../../src/gdb/i386-tdep.c:8455: internal-error: i386_gdbarch_init: Assertion `false' failed.\nA problem internal to GDB has been detected,\nfurther debugging may prove unreliable.\nQuit this debugg"...)
+ at ../../src/gdb/top.c:1141
+ #4 0x0000000002118b64 in defaulted_query(const char *, char, typedef __va_list_tag __va_list_tag *) (
+ ctlstr=0x2e4eb68 "%s\nQuit this debugging session? ", defchar=0 '\000', args=0x7fffffffa6e0)
+ at ../../src/gdb/utils.c:934
+ #5 0x0000000002118f72 in query (ctlstr=0x2e4eb68 "%s\nQuit this debugging session? ")
+ at ../../src/gdb/utils.c:1026
+ #6 0x00000000021170f6 in internal_vproblem(internal_problem *, const char *, int, const char *, typedef __va_list_tag __va_list_tag *) (problem=0x6107bc0 <internal_error_problem>, file=0x2b976c8 "../../src/gdb/i386-tdep.c",
+ line=8455, fmt=0x2b96d7f "%s: Assertion `%s' failed.", ap=0x7fffffffa8e8) at ../../src/gdb/utils.c:417
+ #7 0x00000000021175a0 in internal_verror (file=0x2b976c8 "../../src/gdb/i386-tdep.c", line=8455,
+ fmt=0x2b96d7f "%s: Assertion `%s' failed.", ap=0x7fffffffa8e8) at ../../src/gdb/utils.c:485
+ #8 0x00000000029503b3 in internal_error (file=0x2b976c8 "../../src/gdb/i386-tdep.c", line=8455,
+ fmt=0x2b96d7f "%s: Assertion `%s' failed.") at ../../src/gdbsupport/errors.cc:55
+ #9 0x000000000122d5b6 in i386_gdbarch_init (info=..., arches=0x0) at ../../src/gdb/i386-tdep.c:8455
+ (More stack frames follow...)
+
+ It turns out that the problem is that the async event handler
+ mechanism has been invoked, but this has not yet been initialized.
+
+ If we look at gdb_init (in gdb/top.c) we can indeed see the call to
+ gdb_init_signals is after the call to initialize_current_architecture.
+
+ If I reorder the calls, moving gdb_init_signals earlier, then the
+ initial error is resolved, however, things are still broken. I now
+ see the same "Quit this debugging session? (y or n)" prompt, but when
+ I provide an answer and press return GDB immediately crashes.
+
+ So what's going on now? The next problem is that the call_readline
+ field within the current_ui structure is not initialized, and this
+ callback is invoked to process the reply I entered.
+
+ The problem is that call_readline is setup as a result of calling
+ set_top_level_interpreter, which is called from captured_main_1.
+ Unfortunately, set_top_level_interpreter is called after gdb_init is
+ called.
+
+ I wondered how to solve this problem for a while, however, I don't
+ know if there's an easy "just reorder some lines" solution here.
+ Looking through captured_main_1 there seems to be a bunch of
+ dependencies between printing various things, parsing config files,
+ and setting up the interpreter. I'm sure there is a solution hiding
+ in there somewhere.... I'm just not sure I want to spend any longer
+ looking for it.
+
+ So.
+
+ I propose a simpler solution, more of a hack/work-around. In utils.c
+ we already have a function filtered_printing_initialized, this is
+ checked in a few places within internal_vproblem. In some of these
+ cases the call gates whether or not GDB will query the user.
+
+ My proposal is to add a new readline_initialized function, which
+ checks if the current_ui has had readline initialized yet. If this is
+ not the case then we should not attempt to query the user.
+
+ After this change GDB prints the error message, the backtrace, and
+ then aborts (including dumping core). This actually seems pretty sane
+ as, if GDB has not yet made it through the initialization then it
+ doesn't make much sense to allow the user to say "no, I don't want to
+ quit the debug session" (I think).
+
+2022-04-07 Luis Machado <luis.machado@arm.com>
+
+ Recognize the NT_ARM_SYSTEM_CALL register set
+ Update binutils to recognize the NT_ARM_SYSTEM_CALL set that is dumped by
+ Linux to core files.
+
+2022-04-07 Mark Harmstone <mark@harmstone.com>
+
+ Add support for COFF secidx relocations
+ bfd * coff-i386.c (in_reloc_p): Add R_SECTION.
+ (howto_table): Add R_SECTION.
+ (coff_pe_i386_relocation_section): Add support for R_SECTION.
+ (coff_i386_reloc_type_lookup): Add support for
+ BFD_RELOC_16_SECCIDX.
+ * coff-x86_64.c (in_reloc_p): Add R_SECTION.
+ (howto_table): Add R_SECTION.
+ (coff_pe_amd64_relocation_section): Add support for R_SECTION.
+ (coff_amd64_reloc_type_lookup): Add support for
+ BFD_RELOC_16_SECCIDX.
+ * reloc.c: Add BFD_RELOC_16_SECIDX.
+ * bfd-in2.h: Regenerate.
+ * libbfd.h: Regenerate.
+
+ gas * config/tc-i386.c (pe_directive_secidx): New function.
+ (md_pseudo_table): Add support for secidx.
+ (x86_cons_fix_new): Likewise.
+ (tc_gen_reloc): Likewise.
+ * expr.c (op_rank): Add O_secidx.
+ * expr.h (operatorT): Likewise.
+ * symbols.c (resolve_symbol_value): Add support for O_secidx.
+ * testsuite/gas/i386/secidx.s: New test source file.
+ * testsuite/gas/i386/secidx.d: New test driver file.
+ * testsuite/gas/i386/i386.exp: Run new test.
+
+ include * coff/i386.h: Define R_SECTION.
+ * coff/x86_64.h: Likewise.
+
+ ld * testsuite/ld-pe/secidx1.s: New test source file.
+ * testsuite/ld-pe/secidx2.s: New test source file.
+ * testsuite/ld-pe/secidx.d: New test driver file.
+ * testsuite/ld-pe/secidx_64.d: New test driver file.
+ * testsuite/ld-pe/pe.exp: Add new tests.
+
+2022-04-07 Jan Beulich <jbeulich@suse.com>
+
+ gas/Dwarf: record functions
+ To help tools like addr2line looking up function names, in particular
+ when dealing with e.g. PE/COFF binaries (linked from ELF objects), where
+ there's no ELF symbol table to fall back to, emit minimalistic
+ information for functions marked as such and having their size
+ specified.
+
+ Notes regarding the restriction to (pure) ELF:
+ - I realize this is a layering violation; I don't see how to deal with
+ that in a better way.
+ - S_GET_SIZE(), when OBJ_MAYBE_ELF is defined, looks wrong: Unlike
+ S_SET_SIZE() it does not check whether the hook is NULL.
+ - symbol_get_obj(), when OBJ_MAYBE_ELF is defined, looks unusable, as
+ its return type can only ever be one object format's type (and this
+ may then not be ELF's).
+
+ The new testcases are limited to x86 because I wanted to include the
+ case where function size can't be determined yet at the time Dwarf2 info
+ is generated. As .nops gains support by further targets, they could also
+ be added here then (with, as necessary, expecations suitably relaxed to
+ cover for insn size differences).
+
+2022-04-07 Jan Beulich <jbeulich@suse.com>
+
+ Arm64: arrange for line number emission for .inst
+ Just like insns encoded the more conventional way these should have line
+ number info associated with them.
+
+ Arm32: arrange for line number emission for .inst
+ Just like insns encoded the more conventional way these should have line
+ number info associated with them.
+
+ RISC-V: add testcase to check line number emission for .insn
+ Since no such test looks to exist, derive one from insn.s.
+
+2022-04-07 Andreas Krebbel <krebbel@linux.ibm.com>
+
+ IBM zSystems: Add support for z16 as CPU name.
+ So far z16 was identified as arch14. After the machine has been
+ announced we can now add the real name.
+
+ gas/ChangeLog:
+
+ * config/tc-s390.c (s390_parse_cpu): Add z16 as alternate CPU
+ name.
+ * doc/as.texi: Add z16 and arch14 to CPU string list.
+ * doc/c-s390.texi: Add z16 to CPU string list.
+
+ opcodes/ChangeLog:
+
+ * s390-mkopc.c (main): Enable z16 as CPU string in the opcode
+ table.
+
+2022-04-07 GDB Administrator <gdbadmin@sourceware.org>
+
+ Automatic date update in version.in
+
+2022-04-06 Youling Tang <tangyouling@loongson.cn>
+
+ gdb: mips: Fix the handling of complex type of function return value
+ $ objdump -d outputs/gdb.base/varargs/varargs
+ 00000001200012e8 <find_max_float_real>:
+ ...
+ 1200013b8: c7c10000 lwc1 $f1,0(s8)
+ 1200013bc: c7c00004 lwc1 $f0,4(s8)
+ 1200013c0: 46000886 mov.s $f2,$f1
+ 1200013c4: 46000046 mov.s $f1,$f0
+ 1200013c8: 46001006 mov.s $f0,$f2
+ 1200013cc: 46000886 mov.s $f2,$f1
+ 1200013d0: 03c0e825 move sp,s8
+ 1200013d4: dfbe0038 ld s8,56(sp)
+ 1200013d8: 67bd0080 daddiu sp,sp,128
+ 1200013dc: 03e00008 jr ra
+ 1200013e0: 00000000 nop
+
+ From the above disassembly, we can see that when the return value of the
+ function is a complex type and len <= 2 * MIPS64_REGSIZE, the return value
+ will be passed through $f0 and $f2, so fix the corresponding processing
+ in mips_n32n64_return_value().
+
+ $ make check RUNTESTFLAGS='GDB=../gdb gdb.base/varargs.exp --outdir=test'
+
+ Before applying the patch:
+ FAIL: gdb.base/varargs.exp: print find_max_float_real(4, fc1, fc2, fc3, fc4)
+ FAIL: gdb.base/varargs.exp: print find_max_double_real(4, dc1, dc2, dc3, dc4)
+
+ # of expected passes 9
+ # of unexpected failures 2
+
+ After applying the patch:
+ # of expected passes 11
+
+ This also fixes:
+ FAIL: gdb.base/callfuncs.exp: call inferior func with struct - returns float _Complex
+
+ Co-Authored-By: Maciej W. Rozycki <macro@orcam.me.uk>
+
+2022-04-06 Tom Tromey <tom@tromey.com>
+
+ Use new and delete in jit.c
+ This changes jit.c to use new and delete, rather than XCNEW. This
+ simplifies the code a little. This was useful for another patch I'm
+ working on, and I thought it would make sense to send it separately.
+
+ Regression tested on x86-64 Fedora 34.
+
+2022-04-06 Simon Marchi <simon.marchi@efficios.com>
+
+ gdb: don't copy entirely optimized out values in value_copy
+ Bug 28980 shows that trying to value_copy an entirely optimized out
+ value causes an internal error. The original bug report involves MI and
+ some Python pretty printer, and is quite difficult to reproduce, but
+ another easy way to reproduce (that is believed to be equivalent) was
+ proposed:
+
+ $ ./gdb -q -nx --data-directory=data-directory -ex "py print(gdb.Value(gdb.Value(5).type.optimized_out()))"
+ /home/smarchi/src/binutils-gdb/gdb/value.c:1731: internal-error: value_copy: Assertion `arg->contents != nullptr' failed.
+
+ This is caused by 5f8ab46bc691 ("gdb: constify parameter of
+ value_copy"). It added an assertion that the contents buffer is
+ allocated if the value is not lazy:
+
+ if (!value_lazy (val))
+ {
+ gdb_assert (arg->contents != nullptr);
+
+ This was based on the comment on value::contents, which suggest that
+ this is the case:
+
+ /* Actual contents of the value. Target byte-order. NULL or not
+ valid if lazy is nonzero. */
+ gdb::unique_xmalloc_ptr<gdb_byte> contents;
+
+ However, it turns out that it can also be nullptr also if the value is
+ entirely optimized out, for example on exit of
+ allocate_optimized_out_value. That function creates a lazy value, marks
+ the entire value as optimized out, and then clears the lazy flag. But
+ contents remains nullptr.
+
+ This wasn't a problem for value_copy before, because it was calling
+ value_contents_all_raw on the input value, which caused contents to be
+ allocated before doing the copy. This means that the input value to
+ value_copy did not have its contents allocated on entry, but had it
+ allocated on exit. The result value had it allocated on exit. And that
+ we copied bytes for an entirely optimized out value (i.e. meaningless
+ bytes).
+
+ From here I see two choices:
+
+ 1. respect the documented invariant that contents is nullptr only and
+ only if the value is lazy, which means making
+ allocate_optimized_out_value allocate contents
+ 2. extend the cases where contents can be nullptr to also include
+ values that are entirely optimized out (note that you could still
+ have some entirely optimized out values that do have contents
+ allocated, it depends on how they were created) and adjust
+ value_copy accordingly
+
+ Choice #1 is safe, but less efficient: it's not very useful to allocate
+ a buffer for an entirely optimized out value. It's even a bit less
+ efficient than what we had initially, because values coming out of
+ allocate_optimized_out_value would now always get their contents
+ allocated.
+
+ Choice #2 would be more efficient than what we had before: giving an
+ optimized out value without allocated contents to value_copy would
+ result in an optimized out value without allocated contents (and the
+ input value would still be without allocated contents on exit). But
+ it's more risky, since it's difficult to ensure that all users of the
+ contents (through the various_contents* accessors) are all fine with
+ that new invariant.
+
+ In this patch, I opt for choice #2, since I think it is a better
+ direction than choice #1. #1 would be a pessimization, and if we go
+ this way, I doubt that it will ever be revisited, it will just stay that
+ way forever.
+
+ Add a selftest to test this. I initially started to write it as a
+ Python test (since the reproducer is in Python), but a selftest is more
+ straightforward.
+
+ Bug: https://sourceware.org/bugzilla/show_bug.cgi?id=28980
+ Change-Id: I6e2f5c0ea804fafa041fcc4345d47064b5900ed7
+
+2022-04-06 Jeff Law <jeffreyalaw@gmail.com>
+
+ Fix for v850e divq instruction
+ This is the last of the correctness fixes I've been carrying around for the
+ v850.
+
+ Like the other recent fixes, this is another case where we haven't been as
+ careful as we should WRT host vs target types. For the divq instruction
+ both operands are 32 bit types. Yet in the simulator code we convert them
+ from unsigned int to signed long by assignment. So 0xfffffffb (aka -5)
+ turns into 4294967291 and naturally that changes the result of our division.
+
+ The fix is simple, insert a cast to int32_t to force interpretation as a
+ signed value.
+
+ Testcase for the simulator is included. It has a trivial dependency on the
+ bins patch.
+
+2022-04-06 Jeff Law <jeffreyalaw@gmail.com>
+
+ Fix "bins" simulation for v850e3v5
+ I've been carrying this for a few years. One test in the GCC testsuite is
+ failing due to a bug in the handling of the v850e3v5 instruction "bins".
+
+ When the "bins" instruction specifies a 32bit bitfield size, the simulator
+ exhibits undefined behavior by trying to shift a 32 bit quantity by 32 bits.
+ In the case of a 32 bit shift, we know what the resultant mask should be. So
+ we can just set it.
+
+ That seemed better than using 1UL for the constant (on a 32bit host unsigned
+ long might still just be 32 bits) or needlessly forcing everything to
+ long long types.
+
+ Thankfully the case where this shows up is only bins <src>, 0, 32, <dest>
+ which would normally be encoded as a simple move.
+
+ * testsuite/v850/allinsns.exp: Add v850e3v5.
+ * testsuite/v850/bins.cgs: New test.
+ * v850/simops.c (v850_bins): Avoid undefined behavior on left shift.
+
+2022-04-06 Tiezhu Yang <yangtiezhu@loongson.cn>
+
+ gdb: LoongArch: prepend tramp frame unwinder for signal
+ Implement the "init" method of struct tramp_frame to prepend tramp
+ frame unwinder for signal on LoongArch.
+
+ With this patch, the following failed testcases can be fixed:
+
+ FAIL: gdb.base/annota1.exp: backtrace @ signal handler (timeout)
+ FAIL: gdb.base/annota3.exp: backtrace @ signal handler (pattern 2)
+
+2022-04-06 Andrew Burgess <aburgess@redhat.com>
+
+ gdb: make interp_add static
+ Since this commit:
+
+ commit 8322445e0584be846f5873b9aab257dc9fbda05d
+ Date: Tue Jun 21 01:11:45 2016 +0100
+
+ Introduce interpreter factories
+
+ Interpreters should be registered with GDB, not by calling interp_add,
+ but with a call to interp_factory_register. I've checked the insight
+ source, and it too has moved over to using interp_factory_register.
+
+ In this commit I make interp_add static within interps.c.
+
+ There should be no user visible change after this commit.
+
+2022-04-06 Nick Clifton <nickc@redhat.com>
+
+ Add code to display the contents of .debug_loclists sections which contain offset entry tables.
+ PR 28981
+ * dwarf.c (fetch_indexed_value): Rename to fecth_indexed_addr and
+ return the address, rather than a string.
+ (fetch_indexed_value): New function - returns a value indexed by a
+ DW_FORM_loclistx or DW_FORM_rnglistx form.
+ (read_and_display_attr_value): Add support for DW_FORM_loclistx
+ and DW_FORM_rnglistx.
+ (process_debug_info): Load the loclists and rnglists sections.
+ (display_loclists_list): Add support for DW_LLE_base_addressx,
+ DW_LLE_startx_endx, DW_LLE_startx_length and
+ DW_LLE_default_location.
+ (display_offset_entry_loclists): New function. Displays a
+ .debug_loclists section that contains offset entry tables.
+ (display_debug_loc): Call the new function.
+ (display_debug_rnglists_list): Add support for
+ DW_RLE_base_addressx, DW_RLE_startx_endx and DW_RLE_startx_length.
+ (display_debug_ranges): Display the contents of the section's
+ header.
+ * dwarf.h (struct debug_info): Add loclists_base field.
+ * testsuite/binutils-all/dw5.W: Update expected output.
+ * testsuite/binutils-all/x86-64/pr26808.dump: Likewise.
+
+2022-04-06 Luis Machado <luis.machado@linaro.org>
+
+ Enable ARMv8.1-m PACBTI support
+ This set of changes enable support for the ARMv8.1-m PACBTI extensions [1].
+
+ The goal of the PACBTI extensions is similar in scope to that of a-profile
+ PAC/BTI (aarch64 only), but the underlying implementation is different.
+
+ One important difference is that the pointer authentication code is stored
+ in a separate register, thus we don't need to mask/unmask the return address
+ from a function in order to produce a correct backtrace.
+
+ The patch introduces the following modifications:
+
+ - Extend the prologue analyser for 32-bit ARM to handle some instructions
+ from ARMv8.1-m PACBTI: pac, aut, pacg, autg and bti. Also keep track of
+ return address signing/authentication instructions.
+
+ - Adds code to identify object file attributes that indicate the presence of
+ ARMv8.1-m PACBTI (Tag_PAC_extension, Tag_BTI_extension, Tag_PACRET_use and
+ Tag_BTI_use).
+
+ - Adds support for DWARF pseudo-register RA_AUTH_CODE, as described in the
+ aadwarf32 [2].
+
+ - Extends the dwarf unwinder to track the value of RA_AUTH_CODE.
+
+ - Decorates backtraces with the "[PAC]" identifier when a frame has signed
+ the return address.
+
+ - Makes GDB aware of a new XML feature "org.gnu.gdb.arm.m-profile-pacbti". This
+ feature is not included as an XML file on GDB's side because it is only
+ supported for bare metal targets.
+
+ - Additional documentation.
+
+ [1] https://community.arm.com/arm-community-blogs/b/architectures-and-processors-blog/posts/armv8-1-m-pointer-authentication-and-branch-target-identification-extension
+ [2] https://github.com/ARM-software/abi-aa/blob/main/aadwarf32/aadwarf32.rst
+
+2022-04-06 Andrew Burgess <aburgess@redhat.com>
+
+ gdb: move gdb_disassembly_flag into a new disasm-flags.h file
+ While working on the disassembler I was getting frustrated. Every
+ time I touched disasm.h it seemed like every file in GDB would need to
+ be rebuilt. Surely the disassembler can't be required by that many
+ parts of GDB, right?
+
+ Turns out that disasm.h is included in target.h, so pretty much every
+ file was being rebuilt!
+
+ The only thing from disasm.h that target.h needed is the
+ gdb_disassembly_flag enum, as this is part of the target_ops api.
+
+ In this commit I move gdb_disassembly_flag into its own file. This is
+ then included in target.h and disasm.h, after which, the number of
+ files that depend on disasm.h is much reduced.
+
+ I also audited all the other includes of disasm.h and found that the
+ includes in mep-tdep.c and python/py-registers.c are no longer needed,
+ so I've removed these.
+
+ Now, after changing disasm.h, GDB rebuilds much quicker.
+
+ There should be no user visible changes after this commit.
+
+2022-04-06 GDB Administrator <gdbadmin@sourceware.org>
+
+ Automatic date update in version.in
+
+2022-04-05 Tom Tromey <tom@tromey.com>
+
+ Introduce wrapped_file
+ Simon pointed out that timestamped_file probably needed to implement a
+ few more methods. This patch introduces a new file-wrapping file that
+ forwards most of its calls, making it simpler to implement new such
+ files. It also converts timestamped_file and pager_file to use it.
+
+ Regression tested on x86-64 Fedora 34.
+
+2022-04-05 Tom Tromey <tromey@adacore.com>
+
+ Don't call init_thread_list in windows-nat.c
+ I don't think there's any need to call init_thread_list in
+ windows-nat.c. This patch removes it. I tested this using the
+ internal AdaCore test suite on Windows, which FWIW does include some
+ multi-threaded inferiors.
+
+2022-04-05 Simon Marchi <simon.marchi@efficios.com>
+
+ gdb/testsuite: fix intermittent failure in gdb.base/vfork-follow-parent.exp
+ Tom de Vries reported some failures in this test:
+
+ continue
+ Continuing.
+ [New inferior 2 (process 14967)]
+
+ Thread 1.1 "vfork-follow-pa" hit Breakpoint 2, break_parent () at /home/vries/gdb_versions/devel/src/gdb/testsuite/gdb.base/vfork-follow-parent.c:23
+ 23 }
+ (gdb) FAIL: gdb.base/vfork-follow-parent.exp: resolution_method=schedule-multiple: continue to end of inferior 2
+ inferior 1
+ [Switching to inferior 1 [process 14961] (/home/vries/gdb_versions/devel/build/gdb/testsuite/outputs/gdb.base/vfork-follow-parent/vfork-follow-parent)]
+ [Switching to thread 1.1 (process 14961)]
+ #0 break_parent () at /home/vries/gdb_versions/devel/src/gdb/testsuite/gdb.base/vfork-follow-parent.c:23
+ 23 }
+ (gdb) PASS: gdb.base/vfork-follow-parent.exp: resolution_method=schedule-multiple: inferior 1
+ continue
+ Continuing.
+ [Inferior 2 (process 14967) exited normally]
+ (gdb) FAIL: gdb.base/vfork-follow-parent.exp: resolution_method=schedule-multiple: continue to break_parent (the program exited)
+
+ Here, we continue both the vfork parent and child, since
+ schedule-multiple is on. The child exits, which un-freezes the parent
+ and makes an exit event available to GDB. We expect GDB to consume this
+ exit event and present it to the user. Here, we see that GDB shows the
+ parent hitting a breakpoint before showing the child exit.
+
+ Because of the vfork, we know that chronologically, the child exiting
+ must have happend before the parent hitting a breakpoint. However,
+ scheduling being what it is, it is possible for the parent to un-freeze
+ and exit quickly, such that when GDB pulls events out of the kernel,
+ exit events for both processes are available. And then, GDB may chose
+ at random to return the one for the parent first. This is what I
+ imagine what causes the failure shown above.
+
+ We could change the test to expect both possible outcomes, but I wanted
+ to avoid complicating the .exp file that way. Instead, add a variable
+ that the parent loops on that we set only after we confirmed the exit of
+ the child. That should ensure that the order is always the same.
+
+ Note that I wasn't able to reproduce the failure, so I can't tell if
+ this fix really fixes the problem.
+
+ Bug: https://sourceware.org/bugzilla/show_bug.cgi?id=29021
+ Change-Id: Ibc8e527e0e00dac54b22021fe4d9d8ab0f3b28ad
+
+2022-04-05 Simon Marchi <simon.marchi@efficios.com>
+
+ gdb/testsuite: fix intermittent failures in gdb.mi/mi-cmd-user-context.exp
+ I got failures like this once on a CI:
+
+ frame^M
+ &"frame\n"^M
+ ~"#0 child_sub_function () at /home/jenkins/workspace/binutils-gdb_master_build/arch/amd64/target_board/unix/src/binutils-gdb/gdb/testsuite/gdb.mi/user-selected-context-sync.c:33\n"^M
+ ~"33\t dummy = !dummy; /* thread loop line */\n"^M
+ ^done^M
+ (gdb) ^M
+ FAIL: gdb.mi/mi-cmd-user-context.exp: frame 1 (unexpected output)
+
+ The problem is that the test expects the following regexp:
+
+ ".*#0 0x.*"
+
+ And that typically works, when the output of the frame command looks
+ like:
+
+ #0 0x00005555555551bb in child_sub_function () at ...
+
+ Note the lack of hexadecimal address in the failing case. Whether or
+ not the hexadecimal address is printed (roughly) depends on whether the
+ current PC is at the beginning of a line. So depending on where thread
+ 2 was when GDB stopped it (after thread 1 hit its breakpoint), we can
+ get either output. Adjust the regexps to not expect an hexadecimal
+ prefix (0x) but a function name instead (either child_sub_function or
+ child_function). That one is always printed, and is also a good check
+ that we are in the frame we expect.
+
+ Note that for test "frame 5", we are showing a pthread frame (on my
+ system), so the function name is internal to pthread, not something we
+ can rely on. In that case, it's almost certain that we are not at the
+ beginning of a line, or that we don't have debug info, so I think it's
+ fine to expect the hex prefix.
+
+ And for test "frame 6", it's ok to _not_ expect a hex prefix (what the
+ test currently does), since we are showing thread 1, which has hit a
+ breakpoint placed at the beginning of a line.
+
+ When testing this, Tom de Vries pointed out that the current test code
+ doesn't ensure that the child threads are in child_sub_function when
+ they are stopped. If the scheduler chooses so, it is possible for the
+ child threads to be still in the pthread_barrier_wait or child_function
+ functions when they get stopped. So that would be another racy failure
+ waiting to happen.
+
+ The only way I can think of to ensure the child threads are in the
+ child_sub_function function when they get stopped is to synchronize the
+ threads using some variables instead of pthread_barrier_wait. So,
+ replace the barrier with an array of flags (one per child thread). Each
+ child thread flips its flag in child_sub_function to allow the main
+ thread to make progress and eventually hit the breakpoint.
+
+ I copied user-selected-context-sync.c to a new mi-cmd-user-context.c and
+ made modifications to that, to avoid interfering with
+ user-selected-context-sync.exp.
+
+ Bug: https://sourceware.org/bugzilla/show_bug.cgi?id=29025
+ Change-Id: I919673bbf9927158beb0e8b7e9e980b8d65eca90
+
+2022-04-05 Luis Machado <luis.machado@arm.com>
+
+ Fix qRcmd error code parsing
+ Someone at IRC spotted a bug in qRcmd handling. This looks like an oversight
+ or it is that way for historical reasons.
+
+ The code in gdb/remote.c:remote_target::rcmd uses isdigit instead of
+ isxdigit. One could argue that we are expecting decimal numbers, but further
+ below we use fromhex ().
+
+ Update the function to use isxdigit instead and also update the documentation.
+
+ I see there are lots of other cases of undocumented number format for error
+ messages, mostly described as NN instead of nn. For now I'll just update
+ this particular function.
+
+2022-04-05 Simon Marchi <simon.marchi@efficios.com>
+
+ gdb: resume ongoing step after handling fork or vfork
+ The test introduced by this patch would fail in this configuration, with
+ the native-gdbserver or native-extended-gdbserver boards:
+
+ FAIL: gdb.threads/next-fork-other-thread.exp: fork_func=fork: target-non-stop=auto: non-stop=off: displaced-stepping=auto: i=2: next to for loop
+
+ The problem is that the step operation is forgotten when handling the
+ fork/vfork. With "debug infrun" and "debug remote", it looks like this
+ (some lines omitted for brevity). We do the next:
+
+ [infrun] proceed: enter
+ [infrun] proceed: addr=0xffffffffffffffff, signal=GDB_SIGNAL_DEFAULT
+ [infrun] resume_1: step=1, signal=GDB_SIGNAL_0, trap_expected=0, current thread [4154304.4154304.0] at 0x5555555553bf
+ [infrun] do_target_resume: resume_ptid=4154304.0.0, step=1, sig=GDB_SIGNAL_0
+ [remote] Sending packet: $vCont;r5555555553bf,5555555553c4:p3f63c0.3f63c0;c:p3f63c0.-1#cd
+ [infrun] proceed: exit
+
+ We then handle a fork event:
+
+ [infrun] fetch_inferior_event: enter
+ [remote] wait: enter
+ [remote] Packet received: T05fork:p3f63ee.3f63ee;06:0100000000000000;07:b08e59f6ff7f0000;10:bf60e8f7ff7f0000;thread:p3f63c0.3f63c6;core:17;
+ [remote] wait: exit
+ [infrun] print_target_wait_results: target_wait (-1.0.0 [process -1], status) =
+ [infrun] print_target_wait_results: 4154304.4154310.0 [Thread 4154304.4154310],
+ [infrun] print_target_wait_results: status->kind = FORKED, child_ptid = 4154350.4154350.0
+ [infrun] handle_inferior_event: status->kind = FORKED, child_ptid = 4154350.4154350.0
+ [remote] Sending packet: $D;3f63ee#4b
+ [infrun] resume_1: step=0, signal=GDB_SIGNAL_0, trap_expected=0, current thread [4154304.4154310.0] at 0x7ffff7e860bf
+ [infrun] do_target_resume: resume_ptid=4154304.0.0, step=0, sig=GDB_SIGNAL_0
+ [remote] Sending packet: $vCont;c:p3f63c0.-1#73
+ [infrun] fetch_inferior_event: exit
+
+ In the first snippet, we resume the stepping thread with the range-stepping (r)
+ vCont command. But after handling the fork (detaching the fork child), we
+ resumed the whole process freely. The stepping thread, which was paused by
+ GDBserver while reporting the fork event, was therefore resumed freely, instead
+ of confined to the addresses of the stepped line. Note that since this
+ is a "next", it could be that we have entered a function, installed a
+ step-resume breakpoint, and it's ok to continue freely the stepping
+ thread, but that's not the case here. The two snippets shown above were
+ next to each other in the logs.
+
+ For the fork case, we can resume stepping right after handling the
+ event.
+
+ However, for the vfork case, where we are waiting for the
+ external child process to exec or exit, we only resume the thread that
+ called vfork, and keep the others stopped (see patch "gdb: fix handling of
+ vfork by multi-threaded program" prior in this series). So we can't
+ resume the stepping thread right now. Instead, do it after handling the
+ vfork-done event.
+
+ Change-Id: I92539c970397ce880110e039fe92b87480f816bd
+
+2022-04-05 Simon Marchi <simon.marchi@polymtl.ca>
+
+ gdb/remote: remove_new_fork_children don't access target_waitstatus::child_ptid if kind == TARGET_WAITKIND_THREAD_EXITED
+ Following the previous patch, running
+ gdb.threads/forking-threads-plus-breakpoints.exp continuously eventually
+ gives me an internal error.
+
+ gdb/target/waitstatus.h:372: internal-error: child_ptid: Assertion `m_kind == TARGET_WAITKIND_FORKED || m_kind == TARGET_WAITKIND_VFORKED' failed.^M
+ FAIL: gdb.threads/forking-threads-plus-breakpoint.exp: cond_bp_target=0: detach_on_fork=on: displaced=off: inferior 1 exited (GDB internal error)
+
+ The backtrace is:
+
+ 0x55925b679c85 internal_error(char const*, int, char const*, ...)
+ /home/simark/src/binutils-gdb/gdbsupport/errors.cc:55
+ 0x559258deadd2 target_waitstatus::child_ptid() const
+ /home/simark/src/binutils-gdb/gdb/target/waitstatus.h:372
+ 0x55925a7cbac9 remote_target::remove_new_fork_children(threads_listing_context*)
+ /home/simark/src/binutils-gdb/gdb/remote.c:7311
+ 0x55925a79dfdb remote_target::update_thread_list()
+ /home/simark/src/binutils-gdb/gdb/remote.c:3981
+ 0x55925ad79b83 target_update_thread_list()
+ /home/simark/src/binutils-gdb/gdb/target.c:3793
+ 0x55925addbb15 update_thread_list()
+ /home/simark/src/binutils-gdb/gdb/thread.c:2031
+ 0x559259d64838 stop_all_threads(char const*, inferior*)
+ /home/simark/src/binutils-gdb/gdb/infrun.c:5104
+ 0x559259d88b45 keep_going_pass_signal
+ /home/simark/src/binutils-gdb/gdb/infrun.c:8215
+ 0x559259d8951b keep_going
+ /home/simark/src/binutils-gdb/gdb/infrun.c:8251
+ 0x559259d78835 process_event_stop_test
+ /home/simark/src/binutils-gdb/gdb/infrun.c:6858
+ 0x559259d750e9 handle_signal_stop
+ /home/simark/src/binutils-gdb/gdb/infrun.c:6580
+ 0x559259d6c07b handle_inferior_event
+ /home/simark/src/binutils-gdb/gdb/infrun.c:5832
+ 0x559259d57db8 fetch_inferior_event()
+ /home/simark/src/binutils-gdb/gdb/infrun.c:4222
+
+ Indeed, the code accesses target_waitstatus::child_ptid when the kind
+ is TARGET_WAITKIND_THREAD_EXITED, which is not right. A
+ TARGET_WAITKIND_THREAD_EXITED event does not have a child_ptid value
+ associated, it has an exit status, which we are not interested in. The
+ intent is to remove from the thread list the thread that has exited.
+ Its ptid is found in the stop reply event, get it from there.
+
+ Change-Id: Icb298cbb80b8779fdf0c660dde9a5314d5591535
+
+2022-04-05 Simon Marchi <simon.marchi@efficios.com>
+
+ gdbserver: report correct status in thread stop race condition
+ The test introduced by the following patch would sometimes fail in this
+ configuration:
+
+ FAIL: gdb.threads/next-fork-other-thread.exp: fork_func=vfork: target-non-stop=on: non-stop=off: displaced-stepping=auto: i=14: next to for loop
+
+ The test has multiple threads constantly forking or vforking while the
+ main thread keep doing "next"s.
+
+ (After writing the commit message, I realized this also fixes a similar
+ failure in gdb.threads/forking-threads-plus-breakpoint.exp with the
+ native-gdbserver and native-extended-gdbserver boards.)
+
+ As stop_all_threads is called, because the main thread finished its
+ "next", it inevitably happens at some point that we ask the remote
+ target to stop a thread and wait() reports that this thread stopped with
+ a fork or vfork event, instead of the SIGSTOP we sent to try to stop it.
+
+ While running this test, I attached to GDBserver and stopped at
+ linux-low.cc:3626. We can see that the status pulled from the kernel
+ for 2742805 is indeed a vfork event:
+
+ (gdb) p/x w
+ $3 = 0x2057f
+ (gdb) p WIFSTOPPED(w)
+ $4 = true
+ (gdb) p WSTOPSIG(w)
+ $5 = 5
+ (gdb) p/x (w >> 8) & (PTRACE_EVENT_VFORK << 8)
+ $6 = 0x200
+
+ However, the statement at line 3626 overrides that:
+
+ ourstatus->set_stopped (gdb_signal_from_host (WSTOPSIG (w)));
+
+ OURSTATUS becomes "stopped by a SIGTRAP". The information about the
+ fork or vfork is lost.
+
+ It's then all downhill from there, stop_all_threads eventually asks for
+ a thread list update. That thread list includes the child of that
+ forgotten fork or vfork, the remote target goes "oh cool, a new process,
+ let's attach to it!", when in fact that vfork child's destiny was to be
+ detached.
+
+ My reverse-engineered understanding of the code around there is that the
+ if/else between lines 3562 and 3583 (in the original code) makes sure
+ OURSTATUS is always initialized (not "ignore"). Either the details are
+ already in event_child->waitstatus (in the case of fork/vfork, for
+ example), in which case we just copy event_child->waitstatus to
+ ourstatus. Or, if the event is a plain "stopped by a signal" or a
+ syscall event, OURSTATUS is set to "stopped", but without a signal
+ number. Lines 3601 to 3629 (in the original code) serve to fill in that
+ last bit of information.
+
+ The problem is that when `w` holds the vfork status, the code wrongfully
+ takes this branch, because WSTOPSIG(w) returns SIGTRAP:
+
+ else if (current_thread->last_resume_kind == resume_stop
+ && WSTOPSIG (w) != SIGSTOP)
+
+ The intent of this branch is, for example, when we sent SIGSTOP to try
+ to stop a thread, but wait() reports that it stopped with another signal
+ (that it must have received from somewhere else simultaneously), say
+ SIGWINCH. In that case, we want to report the SIGWINCH. But in our
+ fork/vfork case, we don't want to take this branch, as the thread didn't
+ really stop because it received a signal. For the non "stopped by a
+ signal" and non "syscall signal" cases, we would ideally skip over all
+ that snippet that fills in the signal or syscall number.
+
+ The fix I propose is to move this snipppet of the else branch of the
+ if/else above. In addition to moving the code, the last two "else if"
+ branches:
+
+ else if (current_thread->last_resume_kind == resume_stop
+ && WSTOPSIG (w) != SIGSTOP)
+ {
+ /* A thread that has been requested to stop by GDB with vCont;t,
+ but, it stopped for other reasons. */
+ ourstatus->set_stopped (gdb_signal_from_host (WSTOPSIG (w)));
+ }
+ else if (ourstatus->kind () == TARGET_WAITKIND_STOPPED)
+ ourstatus->set_stopped (gdb_signal_from_host (WSTOPSIG (w)));
+
+ are changed into a single else:
+
+ else
+ ourstatus->set_stopped (gdb_signal_from_host (WSTOPSIG (w)));
+
+ This is the default path we take if:
+
+ - W is not a syscall status
+ - W does not represent a SIGSTOP that have sent to stop the thread and
+ therefore want to suppress it
+
+ Change-Id: If2dc1f0537a549c293f7fa3c53efd00e3e194e79
+
+2022-04-05 Simon Marchi <simon.marchi@efficios.com>
+
+ gdb: fix handling of vfork by multi-threaded program (follow-fork-mode=parent, detach-on-fork=on)
+ There is a problem with how GDB handles a vfork happening in a
+ multi-threaded program. This problem was reported to me by somebody not
+ using vfork directly, but using system(3) in a multi-threaded program,
+ which may be implemented using vfork.
+
+ This patch only deals about the follow-fork-mode=parent,
+ detach-on-fork=on case, because it would be too much to chew at once to
+ fix the bugs in the other cases as well (I tried).
+
+ The problem
+ -----------
+
+ When a program vforks, the parent thread is suspended by the kernel
+ until the child process exits or execs. Specifically, in a
+ multi-threaded program, only the thread that called vfork is suspended,
+ other threads keep running freely. This is documented in the vfork(2)
+ man page ("Caveats" section).
+
+ Let's suppose GDB is handling a vfork and the user's desire is to detach
+ from the child. Before detaching the child, GDB must remove the software
+ breakpoints inserted in the shared parent/child address space, in case
+ there's a breakpoint in the path the child is going to take before
+ exec'ing or exit'ing (unlikely, but possible). Otherwise the child could
+ hit a breakpoint instruction while running outside the control of GDB,
+ which would make it crash. GDB must also avoid re-inserting breakpoints
+ in the parent as long as it didn't receive the "vfork done" event (that
+ is, when the child has exited or execed): since the address space is
+ shared with the child, that would re-insert breakpoints in the child
+ process also. So what GDB does is:
+
+ 1. Receive "vfork" event for the parent
+ 2. Remove breakpoints from the (shared) address space and set
+ program_space::breakpoints_not_allowed to avoid re-inserting them
+ 3. Detach from the child thread
+ 4. Resume the parent
+ 5. Wait for and receive "vfork done" event for the parent
+ 6. Clean program_space::breakpoints_not_allowed and re-insert
+ breakpoints
+ 7. Resume the parent
+
+ Resuming the parent at step 4 is necessary in order for the kernel to
+ report the "vfork done" event. The kernel won't report a ptrace event
+ for a thread that is ptrace-stopped. But the theory behind this is that
+ between steps 4 and 5, the parent won't actually do any progress even
+ though it is ptrace-resumed, because the kernel keeps it suspended,
+ waiting for the child to exec or exit. So it doesn't matter for that
+ thread if breakpoints are not inserted.
+
+ The problem is when the program is multi-threaded. In step 4, GDB
+ resumes all threads of the parent. The thread that did the vfork stays
+ suspended by the kernel, so that's fine. But other threads are running
+ freely while breakpoints are removed, which is a problem because they
+ could miss a breakpoint that they should have hit.
+
+ The problem is present with all-stop and non-stop targets. The only
+ difference is that with an all-stop targets, the other threads are
+ stopped by the target when it reports the vfork event and are resumed by
+ the target when GDB resumes the parent. With a non-stop target, the
+ other threads are simply never stopped.
+
+ The fix
+ -------
+
+ There many combinations of settings to consider (all-stop/non-stop,
+ target-non-stop on/off, follow-fork-mode parent/child, detach-on-fork
+ on/off, schedule-multiple on/off), but for this patch I restrict the
+ scope to follow-fork-mode=parent, detach-on-fork=on. That's the
+ "default" case, where we detach the child and keep debugging the
+ parent. I tried to fix them all, but it's just too much to do at once.
+ The code paths and behaviors for when we don't detach the child are
+ completely different.
+
+ The guiding principle for this patch is that all threads of the vforking
+ inferior should be stopped as long as breakpoints are removed. This is
+ similar to handling in-line step-overs, in a way.
+
+ For non-stop targets (the default on Linux native), this is what
+ happens:
+
+ - In follow_fork, we call stop_all_threads to stop all threads of the
+ inferior
+ - In follow_fork_inferior, we record the vfork parent thread in
+ inferior::thread_waiting_for_vfork_done
+ - Back in handle_inferior_event, we call keep_going, which resumes only
+ the event thread (this is already the case, with a non-stop target).
+ This is the thread that will be waiting for vfork-done.
+ - When we get the vfork-done event, we go in the (new) handle_vfork_done
+ function to restart the previously stopped threads.
+
+ In the same scenario, but with an all-stop target:
+
+ - In follow_fork, no need to stop all threads of the inferior, the
+ target has stopped all threads of all its inferiors before returning
+ the event.
+ - In follow_fork_inferior, we record the vfork parent thread in
+ inferior::thread_waiting_for_vfork_done.
+ - Back in handle_inferior_event, we also call keep_going. However, we
+ only want to resume the event thread here, not all inferior threads.
+ In internal_resume_ptid (called by resume_1), we therefore now check
+ whether one of the inferiors we are about to resume has
+ thread_waiting_for_vfork_done set. If so, we only resume that
+ thread.
+
+ Note that when resuming multiple inferiors, one vforking and one not
+ non-vforking, we could resume the vforking thread from the vforking
+ inferior plus all threads from the non-vforking inferior. However,
+ this is not implemented, it would require more work.
+ - When we get the vfork-done event, the existing call to keep_going
+ naturally resumes all threads.
+
+ Testing-wise, add a test that tries to make the main thread hit a
+ breakpoint while a secondary thread calls vfork. Without the fix, the
+ main thread keeps going while breakpoints are removed, resulting in a
+ missed breakpoint and the program exiting.
+
+ Change-Id: I20eb78e17ca91f93c19c2b89a7e12c382ee814a1
+
+2022-04-05 Simon Marchi <simon.marchi@polymtl.ca>
+
+ gdb/infrun: add logging statement to do_target_resume
+ This helped me, it shows which ptid we actually call target_resume with.
+
+ Change-Id: I2dfd771e83df8c25f39371a13e3e91dc7882b73d
+
+2022-04-05 Simon Marchi <simon.marchi@polymtl.ca>
+
+ gdb/infrun: add inferior parameters to stop_all_threads and restart_threads
+ A following patch will want to stop all threads of a given inferior (as
+ opposed to all threads of all inferiors) while handling a vfork, and
+ restart them after. To help with this, add inferior parameters to
+ stop_all_threads and restart_threads. This is done as a separate patch
+ to make sure this doesn't cause regressions on its own, and to keep the
+ following patches more concise.
+
+ No visible changes are expected here, since all calls sites pass
+ nullptr, which should keep the existing behavior.
+
+ Change-Id: I4d9ba886ce842042075b4e346cfa64bbe2580dbf
+
+2022-04-05 Simon Marchi <simon.marchi@polymtl.ca>
+
+ gdb: replace inferior::waiting_for_vfork_done with inferior::thread_waiting_for_vfork_done
+ The inferior::waiting_for_vfork_done flag indicates that some thread in
+ that inferior is waiting for a vfork-done event. Subsequent patches
+ will need to know which thread precisely is waiting for that event.
+
+ Replace the boolean flag (waiting_for_vfork_done) with a thread_info
+ pointer (thread_waiting_for_vfork_done).
+
+ I think there is a latent buglet in that waiting_for_vfork_done is
+ currently not reset on inferior exec or exit. I could imagine that if a
+ thread in the parent process calls exec or exit while another thread of
+ the parent process is waiting for its vfork child to exec or exit, we
+ could end up with inferior::waiting_for_vfork_done without a thread
+ actually waiting for a vfork-done event anymore. And since that flag is
+ checked in resume_1, things could misbehave there.
+
+ Since the new field points to a thread_info object, and those are
+ destroyed on exec or exit, it could be worse now since we could try to
+ access freed memory, if thread_waiting_for_vfork_done were to point to a
+ stale thread_info. To avoid this, clear the field in
+ infrun_inferior_exit and infrun_inferior_execd.
+
+ Change-Id: I31b847278613a49ba03fc4915f74d9ceb228fdce
+
+2022-04-05 Simon Marchi <simon.marchi@efficios.com>
+
+ gdb: make timestamped_file implement write_async_safe
+ Trying to use "set debug linux-nat 1", I get an internal error:
+
+ /home/smarchi/src/binutils-gdb/gdb/ui-file.h:70: internal-error: write_async_safe: write_async_safe
+
+ The problem is that timestamped_file doesn't implement write_async_safe,
+ which linux-nat's sigchld_handler uses. Implement it.
+
+ Change-Id: I830981010c6119f13ae673605ed015cced0f5ee8
+
+2022-04-05 GDB Administrator <gdbadmin@sourceware.org>
+
+ Automatic date update in version.in
+
+2022-04-04 Andrew Burgess <aburgess@redhat.com>
+
+ gdb/testsuite: fix timeout in server-pipe.exp test
+ I noticed that the gdb.server/server-pipe.exp test would sometimes
+ timeout when my machine was more heavily loaded. Turns out the test
+ is reading all the shared libraries over GDB's remote protocol, which
+ can be slow.
+
+ We avoid this in other tests by setting the sysroot in GDBFLAGS,
+ something which is missing from the gdb.server/server-pipe.exp test.
+
+ Fix the timeouts by setting sysroot in GDBFLAGS, after this the shared
+ libraries are no longer copied over the remote protocol, and I no
+ longer see the test timeout.
+
+2022-04-04 John Baldwin <jhb@FreeBSD.org>
+
+ Handle TLS variable lookups when using separate debug files.
+ Commit df22c1e5d53c38f38bce6072bb46de240f9e0e2b handled the case that
+ a separate debug file was passed as the objfile for a shared library
+ to svr4_fetch_objfile_link_map. However, a separate debug file can
+ also be passed for TLS variables in the main executable. In addition,
+ frv_fetch_objfile_link_map also expects to be passed the original
+ objfile rather than a separate debug file, so pull the code to resolve
+ a separate debug file to the main objfile up into
+ target_translate_tls_address.
+
+2022-04-04 Lancelot SIX <lancelot.six@amd.com>
+
+ gdb: Add maint set ignore-prologue-end-flag
+ The previous patch added support for the DWARF prologue-end flag in line
+ table. This flag can be used by DWARF producers to indicate where to
+ place breakpoints past a function prologue. However, this takes
+ precedence over prologue analyzers. So if we have to debug a program
+ with erroneous debug information, the overall debugging experience will
+ be degraded.
+
+ This commit proposes to add a maintenance command to instruct GDB to
+ ignore the prologue_end flag.
+
+ Tested on x86_64-gnu-linux.
+
+ Change-Id: Idda6d1b96ba887f4af555b43d9923261b9cc6f82
+
+2022-04-04 Lancelot SIX <lancelot.six@amd.com>
+
+ gdb: Add support for DW_LNS_set_prologue_end in line-table
+ Add support for DW_LNS_set_prologue_end when building line-tables. This
+ attribute can be set by the compiler to indicate that an instruction is
+ an adequate place to set a breakpoint just after the prologue of a
+ function.
+
+ The compiler might set multiple prologue_end, but considering how
+ current skip_prologue_using_sal works, this commit modifies it to accept
+ the first instruction with this marker (if any) to be the place where a
+ breakpoint should be placed to be at the end of the prologue.
+
+ The need for this support came from a problematic usecase generated by
+ hipcc (i.e. clang). The problem is as follows: There's a function
+ (lets call it foo) which covers PC from 0xa800 to 0xa950. The body of
+ foo begins with a call to an inlined function, covering from 0xa800 to
+ 0xa94c. The issue is that when placing a breakpoint at 'foo', GDB
+ inserts the breakpoint at 0xa818. The 0x18 offset is what GDB thinks is
+ foo's first address past the prologue.
+
+ Later, when hitting the breakpoint, GDB reports the stop within the
+ inlined function because the PC falls in its range while the user
+ expects to stop in FOO.
+
+ Looking at the line-table for this location, we have:
+
+ INDEX LINE ADDRESS IS-STMT
+ [...]
+ 14 293 0x000000000000a66c Y
+ 15 END 0x000000000000a6e0 Y
+ 16 287 0x000000000000a800 Y
+ 17 END 0x000000000000a818 Y
+ 18 287 0x000000000000a824 Y
+ [...]
+
+ For comparison, let's look at llvm-dwarfdump's output for this CU:
+
+ Address Line Column File ISA Discriminator Flags
+ ------------------ ------ ------ ------ --- ------------- -------------
+ [...]
+ 0x000000000000a66c 293 12 2 0 0 is_stmt
+ 0x000000000000a6e0 96 43 82 0 0 is_stmt
+ 0x000000000000a6f8 102 18 82 0 0 is_stmt
+ 0x000000000000a70c 102 24 82 0 0
+ 0x000000000000a710 102 18 82 0 0
+ 0x000000000000a72c 101 16 82 0 0 is_stmt
+ 0x000000000000a73c 2915 50 83 0 0 is_stmt
+ 0x000000000000a74c 110 1 1 0 0 is_stmt
+ 0x000000000000a750 110 1 1 0 0 is_stmt end_sequence
+ 0x000000000000a800 107 0 1 0 0 is_stmt
+ 0x000000000000a800 287 12 2 0 0 is_stmt prologue_end
+ 0x000000000000a818 114 59 81 0 0 is_stmt
+ 0x000000000000a824 287 12 2 0 0 is_stmt
+ 0x000000000000a828 100 58 82 0 0 is_stmt
+ [...]
+
+ The main difference we are interested in here is that llvm-dwarfdump's
+ output tells us that 0xa800 is an adequate place to place a breakpoint
+ past a function prologue. Since we know that foo covers from 0xa800 to
+ 0xa94c, 0xa800 is the address at which the breakpoint should be placed
+ if the user wants to break in foo.
+
+ This commit proposes to add support for the prologue_end flag in the
+ line-program processing.
+
+ The processing of this prologue_end flag is made in skip_prologue_sal,
+ before it calls gdbarch_skip_prologue_noexcept. The intent is that if
+ the compiler gave information on where the prologue ends, we should use
+ this information and not try to rely on architecture dependent logic to
+ guess it.
+
+ The testsuite have been executed using this patch on GNU/Linux x86_64.
+ Testcases have been compiled with both gcc/g++ (verison 9.4.0) and
+ clang/clang++ (version 10.0.0) since at the time of writing GCC does not
+ set the prologue_end marker. Tests done with GCC 11.2.0 (not over the
+ entire testsuite) show that it does not emit this flag either.
+
+ No regression have been observed with GCC or Clang. Note that when
+ using Clang, this patch fixes a failure in
+ gdb.opt/inline-small-func.exp.
+
+ Change-Id: I720449a8a9b2e1fb45b54c6095d3b1e9da9152f8
+
+2022-04-04 Lancelot SIX <lancelot.six@amd.com>
+
+ gdb/buildsym: Line record use a record flag
+ Currently when recording a line entry (with
+ buildsym_compunit::record_line), a boolean argument argument is used to
+ indicate that the is_stmt flag should be set for this particular record.
+ As a later commit will add support for new flags, instead of adding a
+ parameter to record_line for each possible flag, transform the current
+ is_stmt parameter into a enum flag. This flags parameter will allow
+ greater flexibility in future commits.
+
+ This enum flags type is not propagated into the linetable_entry type as
+ this would require a lot of changes across the codebase for no practical
+ gain (it currently uses a bitfield where each interesting flag only
+ occupy 1 bit in the structure).
+
+ Tested on x86_64-linux, no regression observed.
+
+ Change-Id: I5d061fa67bdb34918742505ff983d37453839d6a
+
+2022-04-04 Simon Marchi <simon.marchi@polymtl.ca>
+
+ gdb: make timestamped_file implement can_emit_style_escape
+ In our AMDGPU downstream port, we use styling in some logging output.
+ We noticed it stopped working after the gdb_printf changes. Making
+ timestamped_file implement can_emit_style_escape (returning the value of
+ the stream it wraps) fixes it. To show that it works, modify some
+ logging statements in auto-load.c to output style filenames. You can
+ see it in action by setting "set debug auto-load 1" and running a
+ program. We can incrementally add styling to other debug statements
+ throughout GDB, as needed.
+
+ Change-Id: I78a2fd1e078f80f2263251cf6bc53b3a9de9c17a
+
+2022-04-04 Simon Marchi <simon.marchi@polymtl.ca>
+
+ gdb: remove assertion in psymbol_functions::expand_symtabs_matching
+ psymtab_to_symtab is documented as possibly returning nullptr, if the
+ primary symtab of the partial symtab has no symbols. However,
+ psymbol_functions::expand_symtabs_matching asserts that the result of
+ psymtab_to_symtab as non-nullptr.
+
+ I caught this assert by trying the CTF symbol reader on a library I
+ built with -gctf:
+
+ $ ./gdb --data-directory=data-directory /tmp/babeltrace-ctf/src/lib/.libs/libbabeltrace2.so.0.0.0
+ ...
+ Reading symbols from /tmp/babeltrace-ctf/src/lib/.libs/libbabeltrace2.so.0.0.0...
+ (gdb) maintenance expand-symtabs
+ /home/simark/src/binutils-gdb/gdb/psymtab.c:1142: internal-error: expand_symtabs_matching: Assertion `symtab != nullptr' failed.
+
+ The "symtab" in question is:
+
+ $ readelf --ctf=.ctf /tmp/babeltrace-ctf/src/lib/.libs/libbabeltrace2.so.0.0.0
+ ...
+ CTF archive member: /home/simark/src/babeltrace/src/lib/graph/component-descriptor-set.c:
+
+ Header:
+ Magic number: 0xdff2
+ Version: 4 (CTF_VERSION_3)
+ Flags: 0xe (CTF_F_NEWFUNCINFO, CTF_F_IDXSORTED, CTF_F_DYNSTR)
+ Parent name: .ctf
+ Compilation unit name: /home/simark/src/babeltrace/src/lib/graph/component-descriptor-set.c
+ Type section: 0x0 -- 0x13 (0x14 bytes)
+ String section: 0x14 -- 0x5f (0x4c bytes)
+
+ Labels:
+
+ Data objects:
+
+ Function objects:
+
+ Variables:
+
+ Types:
+ 0x80000001: (kind 5) bt_bool (*) (const bt_value *) (aligned at 0x8)
+
+ Strings:
+ 0x0:
+ 0x1: .ctf
+ 0x6: /home/simark/src/babeltrace/src/lib/graph/component-descriptor-set.c
+
+ It contains a single type, and it is skipped by ctf_add_type_cb, because
+ an identical type was already seen earlier in this objfile. As a
+ result, no compunit_symtab is created.
+
+ Change psymbol_functions::expand_symtabs_matching to expect that
+ psymtab_to_symtab can return nullptr.
+
+ Another possibility would be to make the CTF symbol reader always create
+ a compunit_symtab, even if there are no symbols in it (like the DWARF
+ parser does), but so far I don't see any advantage in doing so.
+
+ Change-Id: Ic43c38202c838a5eb87630ed1fd61d33528164f4
+
+2022-04-04 Andrew Burgess <aburgess@redhat.com>
+
+ sim: fixes for libopcodes styled disassembler
+ In commit:
+
+ commit 60a3da00bd5407f07d64dff82a4dae98230dfaac
+ Date: Sat Jan 22 11:38:18 2022 +0000
+
+ objdump/opcodes: add syntax highlighting to disassembler output
+
+ I broke several sim/ targets by forgetting to update their uses of the
+ libopcodes disassembler to take account of the new styled printing.
+
+ These should all be fixed by this commit.
+
+ I've not tried to add actual styled output to the simulator traces,
+ instead, the styled print routines just ignore the style and print the
+ output unstyled.
+
+2022-04-04 Tom Tromey <tromey@adacore.com>
+
+ Remove some globals from nat/windows-nat.c
+ nat/windows-nat.c has a number of globals that it uses to communicate
+ with its clients (gdb and gdbserver). However, if we ever want the
+ Windows ports to be multi-inferior, globals won't work.
+
+ This patch takes a step toward that by moving most nat/windows-nat.c
+ globals into a new struct windows_process_info. Many functions are
+ converted to be methods on this object.
+
+ A couple of globals remain, as they are needed to truly be global due
+ to the way that the Windows debugging APIs work.
+
+ The clients still have a global for the current process. That is,
+ this patch is a step toward the end goal, but doesn't implement the
+ goal itself.
+
+2022-04-04 Tom Tromey <tromey@adacore.com>
+
+ Remove windows_thread_info destructor
+ windows_thread_info declares and defines a destructor, but this
+ doesn't need to be explicit.
+
+ Use unique_ptr in the Windows thread list
+ windows-nat.c uses some manual memory management when manipulating the
+ thread_list global. Changing this to use unique_ptr simplifies the
+ code, in particular windows_init_thread_list. (Note that, while I
+ think the the call to init_thread_list in there is wrong, I haven't
+ removed it in this patch.)
+
+ Use auto_obstack in windows-nat.c
+ One spot in windows-nat.c can use auto_obstack, removing some manual
+ memory management.
+
+2022-04-04 Tom Tromey <tromey@adacore.com>
+
+ Simplify windows-nat.c solib handling
+ Currently windows-nat.c uses struct so_list to record its local idea
+ of which shared libraries have been loaded. However, many fields in
+ this are not needed, and furthermore I found this quite confusing at
+ first -- Windows actually uses solib-target and so the use of so_list
+ here is weird.
+
+ This patch simplifies this code by changing it to use a std::vector
+ and a new type that holds exactly what's needed for the Windows code.
+
+2022-04-04 Pedro Alves <pedro@palves.net>
+
+ Avoid undefined behavior in gdbscm_make_breakpoint
+ Running gdb.guile/scm-breakpoint.exp against an --enable-ubsan build,
+ we see:
+
+ UNRESOLVED: gdb.guile/scm-breakpoint.exp: test_watchpoints: create a breakpoint with an invalid type number
+ ...
+ guile (define wp2 (make-breakpoint "result" #:wp-class WP_WRITE #:type 999))
+ ../../src/gdb/guile/scm-breakpoint.c:377:11: runtime error: load of value 999, which is not a valid value for type 'bptype'
+ ERROR: GDB process no longer exists
+
+ Fix this by parsing the user/guile input as plain int, and cast to
+ internal type only after we know we have a number that would be valid.
+
+ Change-Id: I03578d07db00be01b610a8f5ce72e5521aea6a4b
+
+2022-04-04 Tom Tromey <tromey@adacore.com>
+
+ Add context-sensitive field name completion to Ada parser
+ This updates the Ada expression parser to implement context-sensitive
+ field name completion. This is PR ada/28727.
+
+ This is somewhat complicated due to some choices in the Ada lexer --
+ it chooses to represent a sequence of "."-separated identifiers as a
+ single token, so the parser must partially recreate the completer's
+ logic to find the completion word boundaries.
+
+ Despite the minor warts in this patch, though, it is a decent
+ improvement. It's possible that the DWARF reader rewrite will help
+ fix the package completion problem pointed out in this patch as well.
+
+ Bug: https://sourceware.org/bugzilla/show_bug.cgi?id=28727
+
+2022-04-04 Tom Tromey <tromey@adacore.com>
+
+ Consolidate single-char tokens in ada-lex.l
+ There are two rules in ada-lex.l that match single-character tokens.
+ This merges them.
+
+ Also, this removes '.' from the list of such tokens. '.' is not used
+ in any production in ada-exp.y, and removing it here helps the
+ subsequent completion patches.
+
+2022-04-04 Tom Tromey <tromey@adacore.com>
+
+ Remove the Ada DOT_ALL token
+ The Ada parser has a DOT_ALL token to represent ".all", and another
+ token to represent other ".<identifier>" forms. However, for
+ completion it is a bit more convenient to unify these cases, so this
+ patch removes DOT_ALL.
+
+ Refactor ada-lex.l:processId
+ processId in ada-lex.l is a bit funny -- it uses an "if" and a
+ "switch", and a nested loop. This patch cleans it up a bit, changing
+ it to use a boolean flag and a simpler "if".
+
+ Implement completion for Ada attributes
+ This adds a completer for Ada attributes. Some work in the lexer is
+ required in order to match end-of-input correctly, as flex does not
+ have a general-purpose way of doing this. (The approach taken here is
+ recommended in the flex manual.)
+
+2022-04-04 Tom Tromey <tromey@adacore.com>
+
+ Refactor expression completion
+ This refactors the gdb expression completion code to make it easier to
+ add more types of completers.
+
+ In the old approach, just two kinds of completers were supported:
+ field names for some sub-expression, or tag names (like "enum
+ something"). The data for each kind was combined in single structure,
+ "expr_completion_state", and handled explicitly by
+ complete_expression.
+
+ In the new approach, the parser state just holds an object that is
+ responsible for implementing completion. This way, new completion
+ types can be added by subclassing this base object.
+
+ The structop completer is moved into structop_base_operation, and new
+ objects are defined for use by the completion code. This moves much
+ of the logic of expression completion out of completer.c as well.
+
+2022-04-04 Tom Tromey <tromey@adacore.com>
+
+ Enable "set debug parser" for Ada
+ I noticed that "set debug parser 1" did not affect Ada parsing. This
+ patch fixes the problem.
+
+ Because this is rarely useful, and pretty much only for maintainers, I
+ didn't write a test case.
+
+2022-04-04 Tom Tromey <tromey@adacore.com>
+
+ Fix bug in Ada attributes lexing
+ The Ada lexer allows whitespace between the apostrophe and the
+ attribute text, but processAttribute does not handle this. This patch
+ fixes the problem and introduces a regression test.
+
+ Remove null sentinel from 'attributes'
+ In a subsequent patch, it's handy if the 'attributes' array in
+ ada-lex.l does not have a NULL sentinel at the end. In C++, this is
+ easy to avoid.
+
+ Handle ghost entities in symbol lookup
+ Normally, SPARK ghost entities are removed from the executable.
+ However, with -gnata, they will be preserved. In this situation, it's
+ handy to be able to inspect them. This patch allows this by removing
+ the "___ghost_" prefix in the appropriate places.
+
+2022-04-04 Simon Marchi <simon.marchi@efficios.com>
+
+ gdb: rename start_symtab/end_symtab to start_compunit_symtab/end_compunit_symtab
+ It's a bit confusing because we have both "compunit_symtab" and "symtab"
+ types, and many methods and functions containing "start_symtab" or
+ "end_symtab", which actually deal with compunit_symtabs. I believe this
+ comes from the time before compunit_symtab was introduced, where
+ symtab did the job of both.
+
+ Rename everything I found containing start_symtab or end_symtab to use
+ start_compunit_symtab or end_compunit_symtab.
+
+ Change-Id: If3849b156f6433640173085ad479b6a0b085ade2
+
+2022-04-04 Simon Marchi <simon.marchi@efficios.com>
+
+ gdb: remove some unused buildsym-legacy functions
+ Pretty much self-explanatory.
+
+ Change-Id: I5b658d017cd891ecdd1df61075eacb0f44316935
+
+2022-04-04 Fangrui Song <i@maskray.me>
+
+ gas: copy st_size only if unset
+ For
+ ```
+ .size foo1, 1
+ foo1:
+
+ .set bar1, foo1
+ .size bar1, 2
+ .size bar2, 2
+ .set bar2, foo1
+
+ .set bar3, foo2
+ .size bar3, 2
+ .size bar4, 2
+ .set bar4, foo2
+
+ .size foo2, 1
+ foo2:
+ ```
+
+ bar1's size is 2 while bar2, bar3, bar4's is 1. The behavior of bar1 makes sense
+ (generally directives on the new symbol should win) and is relied upon by glibc
+ stdio-common/errlist.c:
+
+ ```
+ .hidden _sys_errlist_internal
+ .globl _sys_errlist_internal
+ .type _sys_errlist_internal, @object
+ .size _sys_errlist_internal, 1072
+ _sys_errlist_internal:
+
+ .globl __GLIBC_2_1_sys_errlist
+ .set __GLIBC_2_1_sys_errlist, _sys_errlist_internal
+ .type __GLIBC_2_1_sys_errlist, %object
+ .size __GLIBC_2_1_sys_errlist, 125 * (64 / 8)
+
+ // glibc expects that .size __GLIBC_2_1_sys_errlist, 125 * (64 / 8) wins.
+ ```
+
+ The behavior of bar2/bar3/bar4 seems brittle. To avoid the reordering of the two
+ code blocks which will result in the bar3 situation, glibc compiles errlist.c
+ with gcc -fno-toplevel-reorder (previously -fno-unit-at-a-time).
+
+ To fix the inconsistency and improve robustness, make bar2/bar3/bar4 match bar1,
+ removing the directive order sensitivity.
+
+ There is a pity that `.size dest, 0` is indistinguishable from the case where
+ dest is unset, but the compromise seems fine.
+
+ PR gas/29012
+ * config/obj-elf.c (elf_copy_symbol_attributes): don't copy if src's size
+ has been set.
+ * testsuite/gas/elf/elf.exp: New test.
+ * testsuite/gas/elf/size.d: New file.
+ * testsuite/gas/elf/size.s: Likewise.
+
+2022-04-04 Andrew Burgess <aburgess@redhat.com>
+
+ gdb: remove use of vfprintf_filtered
+ Commit:
+
+ commit 60a3da00bd5407f07d64dff82a4dae98230dfaac
+ Date: Sat Jan 22 11:38:18 2022 +0000
+
+ objdump/opcodes: add syntax highlighting to disassembler output
+
+ Introduced a new use of vfprintf_filtered, which has been deprecated.
+ This commit replaces this with gdb_vprintf instead.
+
+2022-04-04 Andrew Burgess <aburgess@redhat.com>
+
+ opcodes/i386: partially implement disassembler style support
+ This commit adds partial support for disassembler styling in the i386
+ disassembler.
+
+ The i386 disassembler collects the instruction arguments into an array
+ of strings, and then loops over the array printing the arguments out
+ later on. The problem is that by the time we print the arguments out
+ it's not obvious what the type of each argument is.
+
+ Obviously this can be fixed, but I'd like to not do that as part of
+ this commit, rather, I'd prefer to keep this commit as small as
+ possible to get the basic infrastructure in place, then we can improve
+ on this, to add additional styling, in later commits.
+
+ For now then, I think this commit should correctly style mnemonics,
+ some immediates, and comments. Everything else will be printed as
+ plain text, which will include most instruction arguments, unless the
+ argument is printed as a symbol, by calling the print_address_func
+ callback.
+
+ Ignoring colours, there should be no other user visible changes in the
+ output of the disassembler in either objdump or gdb.
+
+ opcodes/ChangeLog:
+
+ * disassembler.c (disassemble_init_for_target): Set
+ created_styled_output for i386 based targets.
+ * i386-dis.c: Changed throughout to use fprintf_styled_func
+ instead of fprintf_func.
+
+2022-04-04 Andrew Burgess <aburgess@redhat.com>
+
+ opcodes/riscv: implement style support in the disassembler
+ Update the RISC-V disassembler to supply style information. This
+ allows objdump to apply syntax highlighting to the disassembler
+ output (when the appropriate command line flag is used).
+
+ Ignoring colours, there should be no other user visible changes in the
+ output of the disassembler in either objdump or gdb.
+
+ opcodes/ChangeLog:
+
+ * disassembler.c (disassemble_init_for_target): Set
+ created_styled_output for riscv.
+ * riscv-dis.c: Changed throughout to use fprintf_styled_func
+ instead of fprintf_func.
+
+2022-04-04 Andrew Burgess <aburgess@redhat.com>
+
+ objdump/opcodes: add syntax highlighting to disassembler output
+ This commit adds the _option_ of having disassembler output syntax
+ highlighted in objdump. This option is _off_ by default. The new
+ command line options are:
+
+ --disassembler-color=off # The default.
+ --disassembler-color=color
+ --disassembler-color=extended-color
+
+ I have implemented two colour modes, using the same option names as we
+ use of --visualize-jumps, a basic 8-color mode ("color"), and an
+ extended 8bit color mode ("extended-color").
+
+ The syntax highlighting requires that each targets disassembler be
+ updated; each time the disassembler produces some output we now pass
+ through an additional parameter indicating what style should be
+ applied to the text.
+
+ As updating all target disassemblers is a large task, the old API is
+ maintained. And so, a user of the disassembler (i.e. objdump, gdb)
+ must provide two functions, the current non-styled print function, and
+ a new, styled print function.
+
+ I don't currently have a plan for converting every single target
+ disassembler, my hope is that interested folk will update the
+ disassemblers they are interested in. But it is possible some might
+ never get updated.
+
+ In this initial series I intend to convert the RISC-V disassembler
+ completely, and also do a partial conversion of the x86 disassembler.
+ Hopefully having the x86 disassembler at least partial converted will
+ allow more people to try this out easily and provide feedback.
+
+ In this commit I have focused on objdump. The changes to GDB at this
+ point are the bare minimum required to get things compiling, GDB makes
+ no use of the styling information to provide any colors, that will
+ come later, if this commit is accepted.
+
+ This first commit in the series doesn't convert any target
+ disassemblers at all (the next two commits will update some targets),
+ so after this commit, the only color you will see in the disassembler
+ output, is that produced from objdump itself, e.g. from
+ objdump_print_addr_with_sym, where we print an address and a symbol
+ name, these are now printed with styling information, and so will have
+ colors applied (if the option is on).
+
+ Finally, my ability to pick "good" colors is ... well, terrible. I'm
+ in no way committed to the colors I've picked here, so I encourage
+ people to suggest new colors, or wait for this commit to land, and
+ then patch the choice of colors.
+
+ I do have an idea about using possibly an environment variable to
+ allow the objdump colors to be customised, but I haven't done anything
+ like that in this commit, the color choices are just fixed in the code
+ for now.
+
+ binutils/ChangeLog:
+
+ * NEWS: Mention new feature.
+ * doc/binutils.texi (objdump): Describe --disassembler-color
+ option.
+ * objdump.c (disassembler_color): New global.
+ (disassembler_extended_color): Likewise.
+ (disassembler_in_comment): Likewise.
+ (usage): Mention --disassembler-color option.
+ (long_options): Add --disassembler-color option.
+ (objdump_print_value): Use fprintf_styled_func instead of
+ fprintf_func.
+ (objdump_print_symname): Likewise.
+ (objdump_print_addr_with_sym): Likewise.
+ (objdump_color_for_disassembler_style): New function.
+ (objdump_styled_sprintf): New function.
+ (fprintf_styled): New function.
+ (disassemble_jumps): Use disassemble_set_printf, and reset
+ disassembler_in_comment.
+ (null_styled_print): New function.
+ (disassemble_bytes): Use disassemble_set_printf, and reset
+ disassembler_in_comment.
+ (disassemble_data): Update init_disassemble_info call.
+ (main): Handle --disassembler-color option.
+
+ include/ChangeLog:
+
+ * dis-asm.h (enum disassembler_style): New enum.
+ (struct disassemble_info): Add fprintf_styled_func field, and
+ created_styled_output field.
+ (disassemble_set_printf): Declare.
+ (init_disassemble_info): Add additional parameter.
+ (INIT_DISASSEMBLE_INFO): Add additional parameter.
+
+ opcodes/ChangeLog:
+
+ * dis-init.c (init_disassemble_info): Take extra parameter,
+ initialize the new fprintf_styled_func and created_styled_output
+ fields.
+ * disassembler.c (disassemble_set_printf): New function definition.
+
+2022-04-04 Tom Tromey <tom@tromey.com>
+
+ Remove more Python 2 code
+ I found another more place that still had a workaround for Python 2.
+ This patch removes it.
+
+2022-04-04 Tom de Vries <tdevries@suse.de>
+
+ [gdb/testsuite] Fix KPASS in gdb.ada/arrayptr.exp
+ On openSUSE Leap 15.3 I run into:
+ ...
+ KPASS: gdb.ada/arrayptr.exp: scenario=minimal: print pa_ptr.all \
+ (PRMS minimal encodings)
+ KPASS: gdb.ada/arrayptr.exp: scenario=minimal: print pa_ptr(3) \
+ (PRMS minimal encodings)
+ KPASS: gdb.ada/arrayptr.exp: scenario=minimal: print pa_ptr.all(3) \
+ (PRMS minimal encodings)
+ ...
+
+ The test-case KFAILs some tests. However, the analysis in the corresponding
+ PR talks of a compiler problem, so it should use XFAILs instead.
+
+ The KFAILs are setup for pre-gcc-12, but apparantly the fix has been
+ backported to system compiler 7.5.0, hence the KPASS.
+
+ Fix this by:
+ - using an XFAIL instead of a KFAIL
+ - matching the specific gdb output that corresponds to the XFAILs
+ (reproduced on Fedora 34).
+
+ Tested on x86_64-linux, specifically openSUSE Leap 15.3 and Fedora 34.
+
+2022-04-04 GDB Administrator <gdbadmin@sourceware.org>
+
+ Automatic date update in version.in
+
+2022-04-03 rupothar <rupesh.potharla@amd.com>
+
+ gdb: add support for Fortran's ASSUMED RANK arrays
+ This patch adds a new dynamic property DYN_PROP_RANK, this property is
+ read from the DW_AT_rank attribute and stored within the type just
+ like other dynamic properties.
+
+ As arrays with dynamic ranks make use of a single
+ DW_TAG_generic_subrange to represent all ranks of the array, support
+ for this tag has been added to dwarf2/read.c.
+
+ The final piece of this puzzle is to add support in gdbtypes.c so that
+ we can resolve an array type with dynamic rank. To do this the
+ existing resolve_dynamic_array_or_string function is split into two,
+ there's a new resolve_dynamic_array_or_string_1 core that is
+ responsible for resolving each rank of the array, while the now outer
+ resolve_dynamic_array_or_string is responsible for figuring out the
+ array rank (which might require resolving a dynamic property) and then
+ calling the inner core.
+
+ The resolve_dynamic_range function now takes a rank, which is passed
+ on to the dwarf expression evaluator. This rank will only be used in
+ the case where the array itself has dynamic rank, but we now pass the
+ rank in all cases, this should be harmless if the rank is not needed.
+
+ The only small nit is that resolve_dynamic_type_internal actually
+ handles resolving dynamic ranges itself, which now obviously requires
+ us to pass a rank value. But what rank value to use? In the end I
+ just passed '1' through here as a sane default, my thinking is that if
+ we are in resolve_dynamic_type_internal to resolve a range, then the
+ range isn't part of an array with dynamic rank, and so the range
+ should actually be using the rank value at all.
+
+ An alternative approach would be to make the rank value a
+ gdb::optional, however, this ends up adding a bunch of complexity to
+ the code (e.g. having to conditionally build the array to pass to
+ dwarf2_evaluate_property, and handling the 'rank - 1' in
+ resolve_dynamic_array_or_string_1) so I haven't done that, but could,
+ if people think that would be a better approach.
+
+ Finally, support for assumed rank arrays was only fixed very recently
+ in gcc, so you'll need the latest gcc in order to run the tests for
+ this.
+
+ Here's an example test program:
+
+ PROGRAM arank
+ REAL :: a1(10)
+ CALL sub1(a1)
+
+ CONTAINS
+
+ SUBROUTINE sub1(a)
+ REAL :: a(..)
+ PRINT *, RANK(a)
+ END SUBROUTINE sub1
+ END PROGRAM arank
+
+ Compiler Version:
+ gcc (GCC) 12.0.0 20211122 (experimental)
+
+ Compilation command:
+ gfortran assumedrank.f90 -gdwarf-5 -o assumedrank
+
+ Without Patch:
+
+ gdb -q assumedrank
+ Reading symbols from assumedrank...
+ (gdb) break sub1
+ Breakpoint 1 at 0x4006ff: file assumedrank.f90, line 10.
+ (gdb) run
+ Starting program: /home/rupesh/STAGING-BUILD-2787/bin/assumedrank
+
+ Breakpoint 1, arank::sub1 (a=<unknown type in /home/rupesh/STAGING-BUILD-2787
+ /bin/assumedrank, CU 0x0, DIE 0xd5>) at assumedrank.f90:10
+ 10 PRINT *, RANK(a)
+ (gdb) print RANK(a)
+ 'a' has unknown type; cast it to its declared type
+
+ With patch:
+
+ gdb -q assumedrank
+ Reading symbols from assumedrank...
+ (gdb) break sub1
+ Breakpoint 1 at 0x4006ff: file assumedrank.f90, line 10.
+ (gdb) run
+ Starting program: /home/rupesh/STAGING-BUILD-2787/bin/assumedrank
+
+ Breakpoint 1, arank::sub1 (a=...) at assumedrank.f90:10
+ 10 PRINT *, RANK(a)
+ (gdb) print RANK(a)
+ $1 = 1
+ (gdb) ptype a
+ type = real(kind=4) (10)
+ (gdb)
+
+ Co-Authored-By: Andrew Burgess <aburgess@redhat.com>
+
+2022-04-03 Andrew Burgess <aburgess@redhat.com>
+
+ gdb/dwarf: pass an array of values to the dwarf evaluator
+ When we need to evaluate a DWARF expression in order to resolve some
+ dynamic property of a type we call the dwarf2_evaluate_property
+ function, which is declared in gdb/dwarf/loc.h and defined in
+ gdb/dwarf/loc.c.
+
+ Currently, this function takes (amongst other things) an argument of
+ type property_addr_info called addr_stack and a boolean called
+ push_initial_value. When push_initial_value then the top value of
+ addr_stack is pushed onto the dwarf expression evaluation stack before
+ the expression is evaluated.
+
+ So far this has worked fine, as the only two cases we needed to handle
+ are the case the DWARF expression doesn't require the object
+ address (what the top of addr_stack represents), and the case where
+ the DWARF expression does require the address.
+
+ In the next commit this is going to change. As we add support for
+ Fortran assumed rank arrays, we need to start resolving the dynamic
+ properties of arrays. To do this, we need to push the array rank onto
+ the dwarf expression evaluation stack before the expression is
+ evaluated.
+
+ This commit is a refactoring commit aimed at making it easier to
+ support Fortran assumed rank arrays. Instead of passing a boolean,
+ and using this to decide if we should push the object address or not,
+ we instead pass an array (view) of values that should be pushed to the
+ dwarf expression evaluation stack.
+
+ In the couple of places where we previously passed push_initial_value
+ as true (mostly this was defaulting to false), we now have to pass the
+ address from the addr_stack as an item in the array view.
+
+ In the next commit, when we want to handle passing the array rank,
+ this will easily be supported too.
+
+ There should be no user visible changes after this commit.
+
+2022-04-03 Andrew Burgess <aburgess@redhat.com>
+
+ gdb: small simplification in dwarf2_locexpr_baton_eval
+ While examining the dwarf expression evaluator, I noticed that in
+ dwarf2_locexpr_baton_eval, whenever push_initial_value is true, the
+ addr_stack will never be nullptr.
+
+ This allows for a small cleanup, replacing an if/then/else with an
+ assertion.
+
+ There should be no user visible changes after this commit.
+
+2022-04-03 Andrew Burgess <aburgess@redhat.com>
+
+ gdb/testsuite: resolve some duplicate test names in gdb.base
+ This commit resolves all the duplicate test names that I see in the
+ script:
+
+ gdb.base/attach-pie-misread.exp
+
+ The duplicate names all come from a second call to
+ build_executable_own_libs, so in this commit I've places the second
+ call inside a with_test_prefix block.
+
+ While I was making this change I've also modified the value being
+ passed as the testname for the second build_executable_own_libs call.
+ Previously we used ${test}, however, I think this was likely a
+ mistake, the 'test' variable is setup for the previous test. I
+ suspect that ${testfile} is a better choice - especially now we have a
+ testname prefix.
+
+ As the testname is only used (after various calls) from within
+ build_executable_from_specs should the build fail, I don't think this
+ change really makes much difference though.
+
+ There should be no change in what is tested after this commit.
+
+2022-04-03 Andrew Burgess <aburgess@redhat.com>
+
+ gdb/testsuite: resolve a duplicate test name in a gdb.mi test
+ Solve two duplicate test names in the test script:
+
+ gdb.mi/mi-catch-cpp-exceptions.exp
+
+ by moving the call to restart_for_test inside the with_test_prefix
+ block. There should be no difference in what is tested after this
+ commit.
+
+2022-04-03 Andrew Burgess <aburgess@redhat.com>
+
+ gdb/Makefile.in: move ALLDEPFILES earlier in Makefile.in
+ If I do 'make tags' in the gdb build directory, the tags target does
+ complete, but I see these warnings:
+
+ ../../src/gdb/arm.c: No such file or directory
+ ../../src/gdb/arm-get-next-pcs.c: No such file or directory
+ ../../src/gdb/arm-linux.c: No such file or directory
+
+ The reason for this is the ordering of build rules and make variables
+ in gdb/Makefile.in, specifically, the placement of the tags related
+ rules, and the ALLDEPFILES variable. The ordering is like this:
+
+ TAGFILES_NO_SRCDIR = .... $(ALLDEPFILES) ....
+
+ TAGS: $(TAGFILES_NO_SRCDIR) ....
+ # Recipe uses $(TAGFILES_NO_SRCDIR)
+
+ tags: TAGS
+
+ ALLDEPFILES = .....
+
+ When the TAGS rule is parsed TAGFILES_NO_SRCDIR is expanded, which
+ then expands ALLDEPFILES, which, at that point in the Makefile is
+ undefined, and so expands to the empty string. As a result TAGS does
+ not depend on any file listed in ALLDEPFILES.
+
+ However, when the TAGS recipe is invoked ALLDEPFILES is now defined.
+ As a result, all the files in ALLDEPFILES are passed to the etags
+ program.
+
+ The ALLDEPFILES references three files, arm.c, arm-get-next-pcs.c, and
+ arm-linux.c, which are actually in the gdb/arch/ directory, but, in
+ ALLDEPFILES these files don't include the arch/ prefix. As a result,
+ the etags program ends up looking for these files in the wrong
+ location.
+
+ As ALLDEPFILES is only used by the TAGS rule, this mistake was not
+ previously noticed (the TAGS rule itself was broken until a recent
+ commit).
+
+ In this commit I make two changes, first, I move ALLDEPFILES to be
+ defined before TAGFILES_NO_SRCDIR, this means that the TAGS rule will
+ depend on all the files in ALLDEPFILES. With this change the TAGS
+ rule now breaks complaining that there's no rule to build the 3 files
+ mentioned above.
+
+ Next, I have added all *.c files in gdb/arch/ to ALLDEPFILES,
+ including their arch/ prefix, and removed the incorrect (missing arch/
+ prefix) references.
+
+ With these two changes the TAGS (or tags if you prefer) target now
+ builds without any errors or warnings.
+
+2022-04-03 Reuben Thomas <rrt@sc3d.org>
+
+ gdb/Makefile.in: fix 'make tags' build target
+ The gdb_select.h file was moved to the gdbsupport directory long ago,
+ but a reference was accident left in gdb/Makefile.in (in the
+ HFILES_NO_SRCDIR variable), this commit removes that reference.
+
+ Before this commit, if I use 'make tags' here's what I see:
+
+ $ make tags
+ make: *** No rule to make target 'gdb_select.h', needed by 'TAGS'. Stop.
+
+ After this commit 'make tags' completes, but I still see these
+ warnings:
+
+ ../../src/gdb/arm.c: No such file or directory
+ ../../src/gdb/arm-get-next-pcs.c: No such file or directory
+ ../../src/gdb/arm-linux.c: No such file or directory
+
+ These are caused by a separate issue, and will be addressed in the
+ next commit.
+
+2022-04-03 Andrew Burgess <aburgess@redhat.com>
+
+ gdb/Makefile.in: remove SOURCES variable
+ The SOURCES variable was added to gdb/Makefile.in as part of commit:
+
+ commit fb40c20903110ed8af9701ce7c2635abd3770d52
+ Date: Wed Feb 23 00:25:43 2000 +0000
+
+ Add mi/ and testsuite/gdb.mi/ subdirectories.
+
+ But as far as I can tell was not used at the time it was added, and is
+ not used today.
+
+ Lets remove it.
+
+2022-04-03 Andrew Burgess <aburgess@redhat.com>
+
+ gdb/tui: fair split of delta after a resize
+ Currently, in master gdb, when a tui window is changed in size, the
+ screen delta is mostly just added to the next available window. We
+ do take care to respect the min/max size, but in most cases, these
+ limits are just "the terminal size", and so, we end up placing the
+ whole delta on the next window.
+
+ Consider these steps in an 80 column, 24 line terminal:
+
+ (gdb) tui enable
+ (gdb) layout src
+ (gdb) layout split
+ (gdb) info win
+ Name Lines Columns Focus
+ src 8 80 (has focus)
+ asm 8 80
+ status 1 80
+ cmd 8 80
+ (gdb) winheight cmd +2
+ (gdb) info win
+ Name Lines Columns Focus
+ src 6 80 (has focus)
+ asm 8 80
+ status 1 80
+ cmd 10 80
+
+ Notice that initially, the windows were balanced, 8 lines each for the
+ major windows. Then, when the cmd window was adjusted, the extra two
+ lines were given to the asm window.
+
+ I think it would be nicer if the delta was spread more evenly over the
+ available windows. In the example above, after the adjustment the
+ layout now looks like:
+
+ (gdb) info win
+ Name Lines Columns Focus
+ src 7 80 (has focus)
+ asm 7 80
+ status 1 80
+ cmd 10 80
+
+ This is achieved within tui_layout_split::set_size, by just handing
+ out the delta in increments of 1 to each window (except for the window
+ the user adjusted), until there's no more delta left. Of course, we
+ continue to respect the min/max window sizes.
+
+2022-04-03 Andrew Burgess <aburgess@redhat.com>
+
+ gdb/tui: relax restrictions on window max height and width
+ This commit removes some arbitrary adjustments made in
+ tui_cmd_window::max_height, tui_win_info::max_height, and
+ tui_win_info::max_width.
+
+ These member functions all subtract some constant from the theoretical
+ maximum height or width. I've looked back through the history a
+ little and can see no real reason why these adjustments should be
+ needed, with these adjustments removed all the existing tui tests
+ still pass.
+
+ However, retaining these restrictions causes some bugs, consider:
+
+ (gdb) tui new-layout hsrc {-horizontal src 1 cmd 1} 1
+
+ When this layout is selected with current master, gdb will leave a 4
+ line gap at the bottom of the terminal.
+
+ The problem is that the maximum height is restricted, for the cmd
+ window, to 4 less than the terminal height.
+
+ By removing this restriction gdb is able to size the windows to the
+ complete terminal height, and the layout is done correctly.
+
+ This 4 line restriction is also what prevents this layout from working
+ correctly:
+
+ (gdb) tui new-layout conly cmd 1
+
+ Previously, this layout would present a cmd window only, but there
+ would be a 4 line gap at the bottom of the terminal. This issue was
+ mentioned in an earlier commit in this series (when a different bug
+ was fixed), but with this commit, the above layout now correctly fills
+ the terminal. The associated test is updated.
+
+ After removing the adjustment in tui_cmd_window::max_height, the
+ implementation is now the same as the implementation in the parent
+ class tui_win_info, so I've completely removed the max_height call
+ from tui_cmd_window.
+
+2022-04-03 Andrew Burgess <aburgess@redhat.com>
+
+ gdb/testsuite: some additional tests in gdb.tui/scroll.exp
+ This commit just adds an extra check of the src window size prior to
+ sending all the commands to gdb. We also set the cmd window height to
+ its existing height, this (obviously) shouldn't change the window
+ layout, which we check.
+
+ My main motivation was adding the initial window layout check, the
+ winheight and recheck are just extras. All of these test pass both
+ before and after this commit.
+
+2022-04-03 Andrew Burgess <aburgess@redhat.com>
+
+ gdb/tui: support placing the cmd window into a horizontal layout
+ This commit allows the user to place the cmd window within horizontal
+ tui layouts. Consider this set of steps, carried out in an 80 columns
+ by 24 lines terminal, using current master gdb:
+
+ (gdb) tui new-layout hsrc { -horizontal src 1 cmd 1 } 1 status 1
+ (gdb) tui layout hsrc
+
+ What you end up with is a full width cmd window with the status bar
+ beneath. Where's the src window gone? We then try:
+
+ (gdb) info win
+ Name Lines Columns Focus
+ src 23 3 (has focus)
+ cmd 23 80
+ status 1 80
+ (gdb)
+
+ Something weird has gone on, gdb has overlapped the cmd window with
+ the src window. If we trigger the src window to redraw is content,
+ for example, 'list main', then we see corruption in the cmd window as
+ the src window overwrites it.
+
+ So, what's going on?
+
+ The problem is some code in tui_layout_split::apply, in tui-layout.c.
+ Within 'Step 1', there is a loop that calculates the min/max window
+ sizes for all windows within a tui_layout_split. However, there's a
+ special case for the cmd window.
+
+ This special case is trying to have the cmd window retain its current
+ size when a layout is re-applied, or a new layout is applied. This
+ makes sense, consider moving from the 'src' layout to the 'asm'
+ layout, this looks something like this (status window removed):
+
+ .-------. .-------.
+ | src | | asm |
+ |-------| ====> |-------|
+ | cmd | | cmd |
+ '-------' '-------'
+
+ If the user has gone to the effort of adjusting the cmd window size,
+ then, the thinking goes, we shouldn't reset the cmd window size when
+ switching layouts like this.
+
+ The problem though, is that when we do a switch more like this:
+
+ .-----------. .-----------.
+ | src | | | |
+ |-----------| ====> | asm | cmd |
+ | cmd | | | |
+ '-----------' '-----------'
+
+ Now retaining the cmd window width makes no sense; the new layout has
+ a completely different placement for the cmd window, instead of sizing
+ by height, we're now sizing by width. The existing code doesn't
+ understand this though, and tried to retain the full width for the cmd
+ window.
+
+ To solve this problem, I propose we introduce the idea of a layout
+ "fingerprint". The fingerprint tries to capture, in an abstract way,
+ where the cmd window lives within the layout.
+
+ Only when two layouts have the same fingerprint will we attempt to
+ retain the cmd window size.
+
+ The fingerprint for a layout is represented as a string, the string is
+ a series of 'V' or 'H' characters, ending with a single 'C'
+ character. The series of 'V' and 'H' characters represent the
+ vertical or horizontal layouts that must be passed through to find the
+ cmd window.
+
+ Here are a few examples:
+
+ # This layout is equivalent to the builtin 'src' layout.
+ # Fingerprint: VC
+ tui new-layout example1 src 2 status 0 cmd 1
+
+ # This layout is equivalent to the builtin 'split' layout.
+ # Fingerprint: VC
+ tui new-layout example2 src 1 asm 1 status 0 cmd 1
+
+ # This is the same layout that was given at the top.
+ # Fingerprint: VHC
+ tui new-layout hsrc { -horizontal src 1 cmd 1 } 1 status 1
+
+ And so, when switching between example1 and example2, gdb knows that
+ the cmd window is, basically, in the same sort of position within the
+ layout, and will retain the cmd window size.
+
+ In contrast, when switching to the hsrc layout, gdb understands that
+ the position of the cmd window is different, and does not try to
+ retain the cmd window size.
+
+2022-04-03 Andrew Burgess <aburgess@redhat.com>
+
+ gdb/tui: allow cmd window to change size in tui_layout_split::apply
+ When we switch layouts we call the tui_layout_split::apply member
+ function to reapply the layout, and recalculate all the window sizes.
+
+ One special case is the cmd window, which we try to keep at its
+ existing size.
+
+ However, in some cases it is not appropriate to keep the cmd window at
+ its existing size. I will describe two such cases here, in one, we
+ want the cmd window to reduce in size, and in the other, we want the
+ cmd window to grow in size.
+
+ Try these steps in a 80 columns, by 24 lines terminal:
+
+ (gdb) tui enable
+ (gdb) layout src
+ (gdb) winheight cmd 20
+ (gdb) layout split
+
+ You should see that the status window is missing from the new layout,
+ and that the cmd window has been placed over the border of the asm
+ window. The 'info win' output is:
+
+ (gdb) info win
+ Name Lines Columns Focus
+ src 3 80 (has focus)
+ asm 3 80
+ status 1 80
+ cmd 20 80
+
+ Notice that gdb has assigned 27 lines of screen space, even with the
+ border overlap between the src and asm windows, this is still 2 lines
+ too many.
+
+ The problem here is that after switching layouts, gdb has forced the
+ cmd window to retain its 20 line height. Really, we want the cmd
+ window to reduce in height so that the src and asm windows can occupy
+ their minimum required space.
+
+ This commit allows this (details on how are below). After this
+ commit, in the above situation, we now see the status window displayed
+ correctly, and the 'info win' output is:
+
+ (gdb) info win
+ Name Lines Columns Focus
+ src 3 80 (has focus)
+ asm 3 80
+ status 1 80
+ cmd 18 80
+
+ The cmd window has been reduced in size by 2 lines so that everything
+ can fit on the screen.
+
+ The second example is one which was discussed in a recent commit,
+ consider this case (still in the 80 column, 24 line terminal):
+
+ (gdb) tui enable
+ (gdb) tui new-layout conly cmd 1
+ (gdb) layout conly
+ (gdb) info win
+ Name Lines Columns Focus
+ cmd 8 80 (has focus)
+ (gdb)
+
+ This layout only contains a cmd window, which we would expect to
+ occupy the entire terminal. But instead, the cmd window only occupies
+ the first 8 lines, and the rest of the terminal is unused!
+
+ The reason is, again, that the cmd window is keeping its previous
+ size (8 lines).
+
+ After this commit things are slightly different, the 'info win' output
+ is now:
+
+ (gdb) info win
+ Name Lines Columns Focus
+ cmd 20 80 (has focus)
+
+ Which is a little better, but why only 20 lines? Turns out there's
+ yet another bug hitting this case. That bug will be addressed in a
+ later commit, so, for now, we're accepting the 20 lines.
+
+ What this commit does is modify the phase of tui_layout_split::apply
+ that handles any left over space. Usually, in "Step 2", each
+ sub-layout has a size calculated. As the size is an integer, then,
+ when all sizes are calculated we may have some space left over.
+
+ This extra space is then distributed between all the windows fairly
+ until all the space is used up.
+
+ When we consider windows minimum size, or fixed size windows, then it
+ is possible that we might try to use more space than is available,
+ this was our first example above. The same code that added extra
+ space to the windows, can also be used to reclaim space (in the over
+ allocation case) to allow all windows to fit.
+
+ The problem then is the cmd window, which we often force to a fixed
+ size. Inside the loop that handles the allocation of excess space, if
+ we find that we have tried every window, and still have space either
+ left to give, or we need to claim back more space, then, if the cmd
+ window was changed to a fixed size, we can change the cmd window back
+ to a non-fixed-size window, and proceed to either give, or take space
+ from the cmd window as needed.
+
+2022-04-03 Andrew Burgess <aburgess@redhat.com>
+
+ gdb/tui: fairer distribution of excess space during apply
+ When applying layouts gdb computes the size of each window (or rather,
+ each sub-layout within a layout) using integer arithmetic. As this
+ rounds down the results, then, when all sub-layouts are sized, there
+ is the possibility that we have some space left over.
+
+ Currently, this space is just assigned to an arbitrary sub-layout.
+
+ This can result in some unbalanced results. Consider this set of
+ steps with current master:
+
+ (gdb) tui enable
+ (gdb) layout regs
+ (gdb) info win
+ Name Lines Columns Focus
+ regs 7 80
+ src 9 80 (has focus)
+ status 1 80
+ cmd 8 80
+
+ Notice the weird split between the src and regs windows, the original
+ layout specification has these windows given equal weight. The
+ problem is that, with rounding, both the regs and src windows are
+ initially sized to 7, the extra 2 lines are then arbitrarily added to
+ the src window.
+
+ In this commit, rather than add all the extra space to one single
+ window, I instead hand out the extra space 1 line at a time, looping
+ over all the sub-layouts. We take care to respect the min/max sizes,
+ and so, we now get this result:
+
+ (gdb) tui enable
+ (gdb) layout regs
+ (gdb) info win
+ Name Lines Columns Focus
+ regs 8 80
+ src 8 80 (has focus)
+ status 1 80
+ cmd 8 80
+
+ This looks more natural to me.
+
+ This is obviously a change in behaviour, and so, lots of the existing
+ tests need to be updated to take this into account. None of the
+ changes are huge, it's just a line or two (or column for width) moved
+ between windows.
+
+2022-04-03 Andrew Burgess <aburgess@redhat.com>
+
+ gdb/tui: avoid fp exception when applying layouts
+ Consider:
+
+ (gdb) tui enable
+ (gdb) layout src
+ (gdb) tui new-layout conly cmd 1
+ (gdb) layout conly
+
+ After this, with current master, gdb crashes with a floating-point
+ exception.
+
+ The problem is that in tui_layout_split::apply, when we switch from
+ 'src' to 'conly', we will try to retain the cmd window height. As
+ such, the cmd window will become a fixed size window, which decreases
+ the available_size, but doesn't count towards the total_weight.
+
+ As the cmd window is the only window, the total_weight stays at zero,
+ and, when we move into step 2, where we attempt to size the windows,
+ we perform a divide by zero, and crash.
+
+ After this commit we avoid the divide by zero, and just directly set
+ the window size based on the fixed size.
+
+ There is still a problem after this commit, when the conly layout is
+ selected the cmd window retains its original height, which will only
+ be part of the terminal. The rest of the terminal is left unused.
+ This issue will be addressed in a later commit, this commit is just
+ about the floating-point exception.
+
+2022-04-03 Andrew Burgess <aburgess@redhat.com>
+
+ gdb/tui/testsuite: refactor new-layout.exp test
+ This commit changes the gdb.tui/new-layout.exp test to make use of a
+ list of test descriptions, and a loop to check each description in
+ turn. There's no change to what is actually tested after this commit.
+
+ In future commits I plan to add additional tests to this file, and
+ this will be easier now that all I have to do is add a new test
+ description to the list.
+
+2022-04-03 Andrew Burgess <aburgess@redhat.com>
+
+ gdb/tui: add left_boxed_p and right_boxed_p member functions
+ When I initially saw this code in tui_layout_split::apply, I assumed
+ that this must be a bug:
+
+ /* Two adjacent boxed windows will share a border, making a bit
+ more size available. */
+ if (i > 0
+ && m_splits[i - 1].layout->bottom_boxed_p ()
+ && m_splits[i].layout->top_boxed_p ())
+ ...
+
+ After all, the apply might be laying out a horizontal layout, right?
+ So checking bottom_boxed_p and top_boxed_p is clearly wrong.
+
+ Well, it turns on, that due to the implementations of these things,
+ bottom_boxed_p is equivalent to an imagined right_boxed_p, and
+ top_boxed_p is equivalent to an imagined left_boxed_p.
+
+ In this commit I've renamed both top_boxed_p and bottom_boxed_p to
+ first_edge_has_border_p and last_edge_has_border_p respectively, and
+ extended the comments in tui_layout_base to mention that these methods
+ handle both horizontal and vertical layouts.
+
+ Now, hopefully, the code shouldn't look like it only applies for
+ vertical layouts.
+
+ There should be no user visible changes after this commit.
+
+2022-04-03 Andrew Burgess <aburgess@redhat.com>
+
+ gdb/tui: add a tui debugging flag
+ This commit adds 'set debug tui on|off' and 'show debug tui'. This
+ commit adds the control variable, and the printing macros in
+ tui/tui.h. I've then added some uses of these in tui.c and
+ tui-layout.c.
+
+ To help produce more useful debug output in tui-layout.c, I've added
+ some helper member functions in the class tui_layout_split, and also
+ moved the size_info struct out of tui_layout_split::apply into the
+ tui_layout_split class.
+
+ If tui debug is not turned on, then there should be no user visible
+ changes after this commit.
+
+ One thing to note is that, due to the way that the tui terminal is
+ often cleared, the only way I've found this useful is when I do:
+
+ (gdb) tui enable
+ (gdb) set logging file /path/to/file
+ (gdb) set logging debugredirect on
+ (gdb) set logging enable on
+
+ Additionally, gdb has some quirks when it comes to setting up logging
+ redirect and switching interpreters. Thus, the above only really
+ works if the logging is enabled after the tui is enabled, and disabled
+ again before the tui is disabled.
+
+ Enabling logging and switching interpreters can cause undefined
+ results, including crashes. This is an existing bug in gdb[1], and
+ has nothing directly to do with tui debug, but it is worth mentioning
+ here I think.
+
+ [1] https://sourceware.org/bugzilla/show_bug.cgi?id=28948
+
+2022-04-03 Andrew Burgess <aburgess@redhat.com>
+
+ gdb/tui: add new 'tui window width' command and 'winwidth' alias
+ This commit adds a new command 'tui window width', and an alias
+ 'winwidth'. This command is equivalent to the old 'winheight'
+ command (which was recently renamed 'tui window height').
+
+ Even though I recently moved the old tui commands under the tui
+ namespace, and I would strongly encourage all new tui commands to be
+ added as 'tui ....' only (users can create their own top-level aliases
+ if they want), I'm breaking that suggestion here, and adding a
+ 'winwidth' alias.
+
+ Given that we already have 'winheight' and have done for years, it
+ just didn't seem right to no have the matching 'winwidth'.
+
+ You might notice in the test that the window resizing doesn't quite
+ work right. I setup a horizontal layout, then grow and shrink the
+ windows. At the end of the test the windows should be back to their
+ original size...
+
+ ... they are not. This isn't my fault, honest! GDB's window resizing
+ is a little ... temperamental, and is prone to getting things slightly
+ wrong during resizes, off by 1 type things. This is true for height
+ resizing, as well as the new width resizing.
+
+ Later patches in this series will rework the resizing algorithm, which
+ should improve things in this area. For now, I'm happy that the width
+ resizing is as good as the height resizing, given the existing quirks.
+
+ For the docs side I include a paragraph that explains how multiple
+ windows are required before the width can be adjusted. For
+ completeness, I've added the same paragraph to the winheight
+ description. With the predefined layouts this extra paragraph is not
+ really needed for winheight, as there are always multiple windows on
+ the screen. However, with custom layouts, this might not be true, so
+ adding the paragraph seems like a good idea.
+
+ As for the changes in gdb itself, I've mostly just taken the existing
+ height adjustment code, changed the name to make it generic 'size'
+ adjustment, and added a boolean flag to indicate if we are adjusting
+ the width or the height.
+
+2022-04-03 Andrew Burgess <aburgess@redhat.com>
+
+ gdb/tui: rename tui_layout_split:set_weights_from_heights
+ In a following commit I'm going to add the ability to change the width
+ of a tui window (when in a horizontal layout). As a result, some of
+ the places where we currently hard-code references to height need to
+ be changed to handle either height, or width, based on whether we are
+ in a vertical, or horizontal layout.
+
+ This commit renames set_weights_from_heights to
+ set_weights_from_sizes, and makes the function use either the height,
+ or width as appropriate.
+
+ Currently, the only place that we call this function is from the
+ tui_layout_split::set_height function, in a part of the code we will
+ only reach for vertical layouts, so the new code is not actually being
+ used, but, this small change will help make later patches smaller, so
+ I'm proposing this as a stand alone change.
+
+ There should be no user visible changes after this commit.
+
+2022-04-03 Andrew Burgess <aburgess@redhat.com>
+
+ gdb/tui: rename tui_layout_base::adjust_size to ::set_height
+ Rename tui_layout_base::adjust_size to tui_layout_base::set_height,
+ the new name more accurately reflects what this member function does,
+ and makes it easier for a later commit to add a new
+ tui_layout_base::set_width member function.
+
+ There should be no user visible changes after this commit.
+
+2022-04-03 Andrew Burgess <aburgess@redhat.com>
+
+ gdb: move some commands into the tui namespace
+ There are a lot of tui related commands that live in the top-level
+ command name space, e.g. layout, focus, refresh, winheight.
+
+ Having them at the top level means less typing for the user, which is
+ good, but, I think, makes command discovery harder.
+
+ In this commit, I propose moving all of the above mentioned commands
+ into the tui namespace, so 'layout' becomes 'tui layout', etc. But I
+ will then add aliases so that the old commands will still work,
+ e.g. I'll make 'layout' an alias for 'tui layout'.
+
+ The benefit I see in this work is that tui related commands can be
+ more easily discovered by typing 'tui ' and then tab-completing. Also
+ the "official" command is now a tui-sub-command, this is visible in,
+ for example, the help output, e.g.:
+
+ (gdb) help layout
+ tui layout, layout
+ Change the layout of windows.
+ Usage: tui layout prev | next | LAYOUT-NAME
+
+ List of tui layout subcommands:
+
+ tui layout asm -- Apply the "asm" layout.
+ tui layout next -- Apply the next TUI layout.
+ tui layout prev -- Apply the previous TUI layout.
+ tui layout regs -- Apply the TUI register layout.
+ tui layout split -- Apply the "split" layout.
+ tui layout src -- Apply the "src" layout.
+
+ Which I think is a good thing, it makes it clearer that this is a tui
+ command.
+
+ I've added a NEWS entry and updated the docs to mention the new and
+ old command names, with the new name being mentioned first.
+
+2022-04-03 Simon Marchi <simon.marchi@polymtl.ca>
+
+ gdb: fix gdb_print -> gdb_printf typo
+ This caused a build failure with !CXX_STD_THREAD.
+
+ Change-Id: I30f0c89c43a76f85c0db34809192644fa64a9d18
+
+2022-04-03 Alan Modra <amodra@gmail.com>
+
+ Move microblaze relax info to target specific data
+ Target specific data shouldn't be put in struct bfd_section.
+
+ * section.c (struct bfd_section): Delete relax and relax_count.
+ (BFD_FAKE_SECTION): Adjust to suit.
+ (struct relax_table): Move to..
+ * elf32-microblaze.c (struct relax_table): ..here.
+ (struct _microblaze_elf_section_data): New.
+ (microblaze_elf_section_data): Define.
+ (microblaze_elf_new_section_hook): New function.
+ (bfd_elf32_new_section_hook): Define.
+ (calc_fixup): Return a size_t. Adjust to suit new location of
+ relax and relax_count.
+ (microblaze_elf_relax_section): Adjust to suit new location of
+ relax and relax_count. Make some variables size_t.
+ * bfd-in2.h: Regenerate.
+
+2022-04-03 Alan Modra <amodra@gmail.com>
+
+ Revert commit 240d6706c6a2
+ PR 28592
+ PR 15994
+ PR 15935
+ * dwarf2.c (lookup_address_in_line_info_table): Return bool rather
+ than a range.
+ (comp_unit_find_nearest_line): Likewise. Return true if function
+ info found without line info.
+ (_bfd_dwarf2_find_nearest_line): Revert range handling code.
+
+ Regen bfd po/SRC-POTFILES.in
+
+2022-04-03 GDB Administrator <gdbadmin@sourceware.org>
+
+ Automatic date update in version.in
+
+2022-04-02 Tiezhu Yang <yangtiezhu@loongson.cn>
+
+ gdb: rename floatformats_ia64_quad to floatformats_ieee_quad
+ It is better to rename floatformats_ia64_quad to floatformats_ieee_quad
+ to reflect the reality, and then we can clean up the related code.
+
+ As Tom Tromey said [1]:
+
+ These files are maintained in gcc and then imported into the
+ binutils-gdb repository, so any changes to them will have to
+ be proposed there first.
+
+ the related changes have been merged into gcc master now [2], it is time
+ to do it for gdb.
+
+ [1] https://sourceware.org/pipermail/gdb-patches/2022-March/186569.html
+ [2] https://gcc.gnu.org/git/?p=gcc.git;a=commit;h=b2dff6b2d9d6
+
+2022-04-02 GDB Administrator <gdbadmin@sourceware.org>
+
+ Automatic date update in version.in
+
+2022-04-01 John Baldwin <jhb@FreeBSD.org>
+
+ Remove unused variable.
+
+2022-04-01 Aaron Merey <amerey@redhat.com>
+
+ gdb/debuginfod-support.c: Always display debuginfod errors
+ Errors encountered when downloading files from debuginfod servers
+ are not displayed if debuginfod verbosity is set to 0 (via
+ 'set debuginfod verbose 0').
+
+ Tom recommended that these errors always be displayed, regardless
+ of the verbosity setting [1]. Fix this.
+
+ [1] https://sourceware.org/pipermail/gdb-patches/2022-March/186350.html
+
+2022-04-01 John Baldwin <jhb@FreeBSD.org>
+
+ Use I386_GSBASE_REGNUM in i386fbsd_get_thread_local_address.
+ 32-bit x86 arches always the I386_*BASE_REGNUM values. Only code that
+ needs to support both 64-bit and 32-bit arches needs to use
+ tdep->fsbase_regnum to compute a segment base register number.
+
+ FreeBSD/x86: Read segment base registers from NT_X86_SEGBASES.
+ FreeBSD kernels recently grew a new register core dump note containing
+ the base addresses of the %fs and %gs segments (corresponding to the
+ %fsbase and %gsbase registers). Parse this note to permit inspecting
+ TLS variables in core dumps. Native processes already supported TLS
+ via older ptrace() operations.
+
+2022-04-01 John Baldwin <jhb@FreeBSD.org>
+
+ Use pseudosections for NT_FREEBSD_X86_SEGBASES core dump notes.
+ This includes adding pseudosections when reading a core dump as well
+ as support for writing out a core dump note from a pseudosection.
+
+ bfd/ChangeLog:
+
+ * elf-bfd.h (elfcore_write_x86_segbases): New.
+ * elf.c (elfcore_grok_freebsd_note): Add pseudosections for
+ NT_FREEBSD_X86_SEGBASES register notes.
+ (elfcore_write_x86_segbases): New.
+ (elfcore_write_register_note): Write NT_FREEBSD_X86_SEGBASES
+ register notes.
+
+2022-04-01 John Baldwin <jhb@FreeBSD.org>
+
+ Recognize FreeBSD core dump note for x86 segment base registers.
+ This core dump note contains the value of the base address of the %fs
+ and %gs segments for both i386 and amd64 core dumps. It is primarily
+ useful in resolving the address of TLS variables in core dumps.
+
+ binutils/ChangeLog:
+
+ * readelf.c (get_freebsd_elfcore_note_type): Handle
+ NT_FREEBSD_X86_SEGBASES.
+
+ include/ChangeLog:
+
+ * elf/common.h (NT_FREEBSD_X86_SEGBASES): Define.
+
+2022-04-01 John Baldwin <jhb@FreeBSD.org>
+
+ elfcore_grok_freebsd_note: Remove checks of note->namesz.
+ This function is only called if the note name is "FreeBSD", so
+ checking the name size is unnecessary.
+
+ bfd/ChangeLog:
+
+ * elf.c (elfcore_grok_freebsd_note): Remove checks for namesz.
+
+2022-04-01 Andrew Burgess <aburgess@redhat.com>
+
+ gdb/testing/tui: add new _csi_{L,S,T}
+ This patch was original part of this series:
+
+ https://sourceware.org/pipermail/gdb-patches/2022-March/186429.html
+ https://sourceware.org/pipermail/gdb-patches/2022-March/186433.html
+
+ I've pulled this out as it might be useful ahead of the bigger series
+ being merged.
+
+ This commit adds:
+
+ _csi_L - insert line
+ _csi_S - pan down
+ _csi_T - pan up
+
+2022-04-01 H.J. Lu <hjl.tools@gmail.com>
+
+ x86: Remove bfd_arch_l1om and bfd_arch_k1om
+ Remove bfd_arch_l1om and bfd_arch_k1om since L1OM/K1OM support has been
+ removed from gas, ld and opcodes.
+
+ bfd/
+
+ * Makefile.am (ALL_MACHINES): Remove cpu-l1om.lo and cpu-k1om.lo.
+ (ALL_MACHINES_CFILES): Remove cpu-l1om.c and cpu-k1om.c.
+ * archures.c (bfd_mach_l1om): Removed.
+ (bfd_mach_l1om_intel_syntax): Likewise.
+ (bfd_mach_k1om): Likewise.
+ (bfd_mach_k1om_intel_syntax): Likewise.
+ (bfd_k1om_arch): Likewise.
+ (bfd_l1om_arch): Likewise.
+ (bfd_archures_list): Remove bfd_k1om_arch and bfd_l1om_arch
+ references.
+ * config.bfd (targ_selvecs): Remove l1om_elf64_vec.
+ l1om_elf64_fbsd_vec, k1om_elf64_vec and k1om_elf64_fbsd_vec.
+ (targ_archs): Remove bfd_l1om_arch and bfd_k1om_arch.
+ * configure.ac (k1om_elf64_vec): Removed.
+ (k1om_elf64_fbsd_vec): Likewise.
+ (l1om_elf64_vec): Likewise.
+ (l1om_elf64_fbsd_vec): Likewise.
+ * cpu-k1om.c: Removed.
+ * cpu-l1om.c: Likewise.
+ * elf64-x86-64.c (elf64_l1om_elf_object_p): Removed.
+ (elf64_k1om_elf_object_p): Likewise.
+ (l1om_elf64_vec): Removed.
+ (l1om_elf64_fbsd_vec): Likewise.
+ (k1om_elf64_vec): Likewise.
+ (k1om_elf64_fbsd_vec): Likewise.
+ (ELF_TARGET_OS): Undefine.
+ * targets.c (_bfd_target_vector): Remove k1om_elf64_vec,
+ k1om_elf64_fbsd_vec, l1om_elf64_vec and l1om_elf64_fbsd_vec.
+ * Makefile.in: Regenerate.
+ * bfd-in2.h: Likewise.
+ * configure: Likewise.
+
+ opcodes/
+
+ * configure.ac: Remove bfd_arch_l1om/bfd_arch_k1om references.
+ * disassemble.c (disassembler): Likewise.
+ * configure: Regenerate.
+
+2022-04-01 Simon Marchi <simon.marchi@polymtl.ca>
+
+ gdb/ctf: pass partial symtab's filename to buildsym_compunit
+ I noticed that the CTF symbol reader passes the objfile's name to all
+ buildsym_compunit instances it creates. The result is that all
+ compunit_symtabs created have the same name, that of the objfile:
+
+ { objfile /tmp/babeltrace-ctf/src/lib/.libs/libbabeltrace2.so.0.0.0 ((struct objfile *) 0x613000005d00)
+ { ((struct compunit_symtab *) 0x621000286760)
+ debugformat ctf
+ producer (null)
+ name libbabeltrace2.so.0.0.0
+ dirname (null)
+ blockvector ((struct blockvector *) 0x6210003911d0)
+ user ((struct compunit_symtab *) (null))
+ { symtab /tmp/babeltrace-ctf/src/lib/.libs/libbabeltrace2.so.0.0.0 ((struct symtab *) 0x6210003911f0)
+ fullname (null)
+ linetable ((struct linetable *) 0x0)
+ }
+ }
+ { ((struct compunit_symtab *) 0x621000275c10)
+ debugformat ctf
+ producer (null)
+ name libbabeltrace2.so.0.0.0
+ dirname (null)
+ blockvector ((struct blockvector *) 0x621000286710)
+ user ((struct compunit_symtab *) (null))
+ { symtab /tmp/babeltrace-ctf/src/lib/.libs/libbabeltrace2.so.0.0.0 ((struct symtab *) 0x621000286730)
+ fullname (null)
+ linetable ((struct linetable *) 0x0)
+ }
+ }
+
+ Notice the two "name libbabeltrace2.so.0.0.0".
+
+ Change it to pass the partial_symtab's filename instead. The output
+ becomes:
+
+ { objfile /tmp/babeltrace-ctf/src/lib/.libs/libbabeltrace2.so.0.0.0 ((struct objfile *) 0x613000005d00)
+ { ((struct compunit_symtab *) 0x621000295610)
+ debugformat ctf
+ producer (null)
+ name libbabeltrace2.so.0.0.0
+ dirname (null)
+ blockvector ((struct blockvector *) 0x6210003a15d0)
+ user ((struct compunit_symtab *) (null))
+ { symtab /tmp/babeltrace-ctf/src/lib/.libs/libbabeltrace2.so.0.0.0 ((struct symtab *) 0x6210003a15f0)
+ fullname (null)
+ linetable ((struct linetable *) 0x0)
+ }
+ }
+ { ((struct compunit_symtab *) 0x621000288700)
+ debugformat ctf
+ producer (null)
+ name current-thread.c
+ dirname (null)
+ blockvector ((struct blockvector *) 0x6210002955c0)
+ user ((struct compunit_symtab *) (null))
+ { symtab /home/simark/src/babeltrace/src/lib/current-thread.c ((struct symtab *) 0x6210002955e0)
+ fullname (null)
+ linetable ((struct linetable *) 0x0)
+ }
+ }
+
+ Note that the first compunit_symtab still has libbabeltrace2.so.0.0.0 as
+ its name. This is because the CTF symbol reader really creates a
+ partial symtab named like this. It appears to be because the debug info
+ contains information that has been factored out of all CUs and is at the
+ "top-level" of the objfile, outside any real CU. So it creates a
+ partial symtab and an artificial CU that's named after the objfile.
+
+ Change-Id: I576316bab2a3668adf87b4e6cebda900a8159b1b
+
+2022-04-01 Simon Marchi <simon.marchi@polymtl.ca>
+
+ gdb: print compunit_symtab name in "maint info symtabs"
+ I think it would make sense to print a compunit_symtab's name in "maint
+ info symtabs". If you are looking for a given CU in the list, that's
+ probably the field you will be looking at. As the doc of
+ compunit_symtab::name says, it is not meant to be a reliable file name,
+ it is for debugging purposes (and "maint info symtabs" exists for
+ debugging purposes).
+
+ Sample output with the new field:
+
+ (gdb) maintenance info symtabs
+ { objfile /home/simark/build/binutils-gdb-one-target/gdb/a.out ((struct objfile *) 0x613000005d00)
+ { ((struct compunit_symtab *) 0x621000131630)
+ debugformat DWARF 5
+ producer GNU C17 11.2.0 -mtune=generic -march=x86-64 -g3 -O0
+ name test.c
+ dirname /home/simark/build/binutils-gdb-one-target/gdb
+ blockvector ((struct blockvector *) 0x621000131d10)
+ user ((struct compunit_symtab *) (null))
+ { symtab test.c ((struct symtab *) 0x6210001316b0)
+ fullname (null)
+ linetable ((struct linetable *) 0x621000131d40)
+ }
+ { symtab /home/simark/build/binutils-gdb-one-target/gdb/test.h ((struct symtab *) 0x6210001316e0)
+ fullname (null)
+ linetable ((struct linetable *) 0x0)
+ }
+ { symtab /usr/include/stdc-predef.h ((struct symtab *) 0x621000131710)
+ fullname (null)
+ linetable ((struct linetable *) 0x0)
+ }
+ }
+ { ((struct compunit_symtab *) 0x6210001170a0)
+ debugformat DWARF 5
+ producer GNU C17 11.2.0 -mtune=generic -march=x86-64 -g3 -O0
+ name foo.c
+ dirname /home/simark/build/binutils-gdb-one-target/gdb
+ blockvector ((struct blockvector *) 0x621000131580)
+ user ((struct compunit_symtab *) (null))
+ { symtab foo.c ((struct symtab *) 0x621000117120)
+ fullname (null)
+ linetable ((struct linetable *) 0x6210001315b0)
+ }
+ { symtab /usr/include/stdc-predef.h ((struct symtab *) 0x621000117150)
+ fullname (null)
+ linetable ((struct linetable *) 0x0)
+ }
+ }
+ }
+
+ Change-Id: I17b87adfac2f6551cb5bda30d59f6c6882789211
+
+2022-04-01 Simon Marchi <simon.marchi@polymtl.ca>
+
+ gdb/ctf: don't create a buildsym_compunit when building partial symbols
+ I am trying to do some changes to buildsym_compunit, so I am auditing
+ the current uses. Something seems odd with this use of
+ buildsym_compunit (that this patch removes).
+
+ A buildsym_compunit is normally used when building a compunit_symtab.
+ That is, when expanding a partial symtab into a full compunit symtab.
+ In ctfread.c, a buildsym_compunit is created in ctf_start_archive, which
+ is only used when creating partial symtabs. At this moment, I don't
+ see how that's useful. ctf_start_archive creates a new
+ buildsym_compunit and starts a subfile. But that buildsym_compunit is
+ never used again. It's just overriden in ctf_start_symtab, which means
+ we leak the old buildsym_compunit, I suppose.
+
+ Remove ctf_start_archive completely. Add an assert in
+ ctf_start_symtab to verify that we are not overwriting an existing
+ buildsym_compunit (meaning we'd leak the existing one). This assert
+ triggers without the other part of the fix. When doing:
+
+ $ ./gdb --data-directory=data-directory /tmp/babeltrace-ctf/src/lib/.libs/libbabeltrace2.so.0.0.0
+ ...
+ (gdb) maintenance expand-symtabs
+ /home/simark/src/binutils-gdb/gdb/ctfread.c:1255: internal-error: ctf_start_symtab: Assertion `!ccp->builder' failed.
+
+ Change-Id: I666d146454a019f08e7305f3a1c4a974d27b4592
+
+2022-04-01 Tom Tromey <tom@tromey.com>
+
+ Style URLs in GDB output
+ I noticed that GDB will display URLs in a few spots. This changes
+ them to be styled. Originally I thought I'd introduce a new "url"
+ style, but there aren't many places to use this, so I just reused
+ filename styling instead. This patch also changes the debuginfod URL
+ list to be printed one URL per line. I think this is probably a bit
+ easier to read.
+
+2022-04-01 GDB Administrator <gdbadmin@sourceware.org>
+
+ Automatic date update in version.in
+
+2022-03-31 Simon Marchi <simon.marchi@polymtl.ca>
+
+ gdb: initialize ctf_context::builder in create_partial_symtab
+ I built a random project with -gctf, in order to test the CTF support in
+ GDB. With my ASan/UBSan/etc-enabled build of GDB, I get:
+
+ $ ./gdb --data-directory=data-directory /tmp/babeltrace-ctf/src/lib/.libs/libbabeltrace2.so.0.0.0
+ ...
+ Reading symbols from /tmp/babeltrace-ctf/src/lib/.libs/libbabeltrace2.so.0.0.0...
+ /home/simark/src/binutils-gdb/gdb/ctfread.c:1545:31: runtime error: member call on misaligned address 0xbebebebebebebebe for type 'struct buildsym_compunit', which requires 8 byte alignment
+ 0xbebebebebebebebe: note: pointer points here
+
+ The 0xbebebebebebebebe value is a sign that the ctf_context::builder
+ field is uninitialized. The problem probably goes under the radar if
+ the field happens to be zero-initialized, because ctf_start_archive
+ contains this code:
+
+ if (ccx->builder == nullptr)
+ {
+ ccx->builder = new buildsym_compunit (of,
+ of->original_name, nullptr, language_c, 0);
+
+ If the field was zero-initialized (by chance), this will create a new
+ buildsym_compunit. But if the field was purposely filled with random
+ bytes by one of the sanitizers, we won't create a buildsym_compunit here
+ and we'll continue with ccx->builder equal to 0xbebebebebebebebe.
+
+ Fix this the easy way by initializing ccx->builder where the other
+ ctf_context fields are initialized (yeah, this code could be made nicer
+ C++, but I am going for the obvious fix here).
+
+ With this patch, this passes cleanly on my system:
+
+ $ make check TESTS="gdb.ctf/*.exp" RUNTESTFLAGS="CC_FOR_TARGET=/opt/gcc/git/bin/gcc"
+ # of expected passes 40
+
+ ... where /opt/gcc/git/bin/gcc is a gcc with CTF support, given my
+ system gcc does not have it.
+
+ Change-Id: Idea1b0cf3e3708b72ecb16b1b60222439160f9b9
+
+2022-03-31 Tom Tromey <tromey@adacore.com>
+
+ Remove dbx mode
+ This patch removes gdb's dbx mode. Regression tested on x86-64 Fedora
+ 34.
+
+2022-03-31 H.J. Lu <hjl.tools@gmail.com>
+
+ gdb: Consolidate 32bit-pkeys.xml and 64bit-pkeys.xml
+ 1. Since 32bit-pkeys.xml and 64bit-pkeys.xml are identical, consolidate
+ them into a single keys.xml.
+ 2. Enable PKU for x32 to fix:
+
+ $ gdbserver :123456 x32-program
+ ...
+ .../gdbserver/regcache.cc:255: A problem internal to GDBserver has been detected
+ .
+ Unknown register pkru requested
+
+ on Tiger Lake.
+
+2022-03-31 Simon Marchi <simon.marchi@polymtl.ca>
+
+ gdb/linux-nat: remove check based on current_inferior in linux_handle_extended_wait
+ The check removed by this patch, using current_inferior, looks wrong.
+ When debugging multiple inferiors with the Linux native target and
+ linux_handle_extended_wait is called, there's no guarantee about which
+ is the current inferior. The vfork-done event we receive could be for
+ any inferior. If the vfork-done event is for a non-current inferior, we
+ end up wrongfully ignoring it. As a result, the core never processes a
+ TARGET_WAITKIND_VFORK_DONE event, program_space::breakpoints_not_allowed
+ is never cleared, and breakpoints are never reinserted. However,
+ because the Linux native target decided to ignore the event, it resumed
+ the thread - while breakpoints out. And that's bad.
+
+ The proposed fix is to remove this check. Always report vfork-done
+ events and let infrun's logic decide if it should be ignored. We don't
+ save much cycles by filtering the event here.
+
+ Add a test that replicates the situation described above. See comments
+ in the test for more details.
+
+ Change-Id: Ibe33c1716c3602e847be6c2093120696f2286fbf
+
+2022-03-31 Simon Marchi <simon.marchi@polymtl.ca>
+
+ gdbserver/linux: set lwp !stopped when failing to resume
+ I see some failures, at least in gdb.multi/multi-re-run.exp and
+ gdb.threads/interrupted-hand-call.exp. Running `stress -C $(nproc)` at
+ the same time as the test makes those tests relatively frequent.
+
+ Let's take gdb.multi/multi-re-run.exp as an example. The failure looks
+ like this, an unexpected "no resumed":
+
+ continue
+ Continuing.
+ No unwaited-for children left.
+ (gdb) FAIL: gdb.multi/multi-re-run.exp: re_run_inf=2: iter=1: continue until exit
+
+ The situation is:
+
+ - Inferior 1 is stopped somewhere, it won't really play a role here.
+ - Inferior 2 has 2 threads, both stopped.
+ - We resume inferior 2, the leader thread is expected to exit, making
+ the process exit.
+
+ From GDB's perspective, a failing run looks like this:
+
+ [infrun] fetch_inferior_event: enter
+ [infrun] scoped_disable_commit_resumed: reason=handling event
+ [infrun] do_target_wait: Found 2 inferiors, starting at #1
+ [infrun] random_pending_event_thread: None found.
+ [remote] wait: enter
+ [remote] Packet received: T0506:20dcffffff7f0000;07:20dcffffff7f0000;10:9551555555550000;thread:pae4cd.ae4cd;core:e;
+ [remote] wait: exit
+ [infrun] print_target_wait_results: target_wait (-1.0.0 [process -1], status) =
+ [infrun] print_target_wait_results: 713933.713933.0 [Thread 713933.713933],
+ [infrun] print_target_wait_results: status->kind = STOPPED, sig = GDB_SIGNAL_TRAP
+ [infrun] handle_inferior_event: status->kind = STOPPED, sig = GDB_SIGNAL_TRAP
+ [infrun] clear_step_over_info: clearing step over info
+ [infrun] context_switch: Switching context from 0.0.0 to 713933.713933.0
+ [infrun] handle_signal_stop: stop_pc=0x555555555195
+ [infrun] start_step_over: enter
+ [infrun] start_step_over: stealing global queue of threads to step, length = 0
+ [infrun] operator(): step-over queue now empty
+ [infrun] start_step_over: exit
+ [infrun] process_event_stop_test: no stepping, continue
+ [remote] Sending packet: $Z0,555555555194,1#8e
+ [remote] Packet received: OK
+ [infrun] resume_1: step=0, signal=GDB_SIGNAL_0, trap_expected=0, current thread [713933.713933.0] at 0x555555555195
+ [remote] Sending packet: $QPassSignals:e;10;14;17;1a;1b;1c;21;24;25;2c;4c;97;#0a
+ [remote] Packet received: OK
+ [remote] Sending packet: $vCont;c:pae4cd.-1#9f
+ [infrun] prepare_to_wait: prepare_to_wait
+ [infrun] reset: reason=handling event
+ [infrun] maybe_set_commit_resumed_all_targets: enabling commit-resumed for target extended-remote
+ [infrun] maybe_call_commit_resumed_all_targets: calling commit_resumed for target extended-remote
+ [infrun] maybe_call_commit_resumed_all_targets: calling commit_resumed for target extended-remote
+ [infrun] fetch_inferior_event: exit
+ [infrun] fetch_inferior_event: enter
+ [infrun] scoped_disable_commit_resumed: reason=handling event
+ [infrun] do_target_wait: Found 2 inferiors, starting at #0
+ [infrun] random_pending_event_thread: None found.
+ [remote] wait: enter
+ [remote] Packet received: N
+ [remote] wait: exit
+ [infrun] print_target_wait_results: target_wait (-1.0.0 [process -1], status) =
+ [infrun] print_target_wait_results: -1.0.0 [process -1],
+ [infrun] print_target_wait_results: status->kind = NO_RESUMED
+ [infrun] handle_inferior_event: status->kind = NO_RESUMED
+ [remote] Sending packet: $Hgp0.0#ad
+ [remote] Packet received: OK
+ [remote] Sending packet: $qXfer:threads:read::0,1000#92
+ [remote] Packet received: l<threads>\n<thread id="pae4cb.ae4cb" core="3" name="multi-re-run-1" handle="40c7c6f7ff7f0000"/>\n<thread id="pae4cb.ae4cc" core="2" name="multi-re-run-1" handle="40b6c6f7ff7f0000"/>\n<thread id="pae4cd.ae4ce" core="1" name="multi-re-run-2" handle="40b6c6f7ff7f0000"/>\n</threads>\n
+ [infrun] stop_waiting: stop_waiting
+ [remote] Sending packet: $qXfer:threads:read::0,1000#92
+ [remote] Packet received: l<threads>\n<thread id="pae4cb.ae4cb" core="3" name="multi-re-run-1" handle="40c7c6f7ff7f0000"/>\n<thread id="pae4cb.ae4cc" core="2" name="multi-re-run-1" handle="40b6c6f7ff7f0000"/>\n<thread id="pae4cd.ae4ce" core="1" name="multi-re-run-2" handle="40b6c6f7ff7f0000"/>\n</threads>\n
+ [infrun] infrun_async: enable=0
+ [infrun] reset: reason=handling event
+ [infrun] maybe_set_commit_resumed_all_targets: enabling commit-resumed for target extended-remote
+ [infrun] maybe_call_commit_resumed_all_targets: calling commit_resumed for target extended-remote
+ [infrun] maybe_call_commit_resumed_all_targets: calling commit_resumed for target extended-remote
+ [infrun] fetch_inferior_event: exit
+
+ We can see that we resume the inferior with vCont;c, but got NO_RESUMED.
+ When the test passes, we get an EXITED status to indicate the process
+ has exited.
+
+ From GDBserver's point of view, it looks like this. The logs contain
+ some logging I added and that are part of this patch.
+
+ [remote] getpkt: getpkt ("vCont;c:pae4cf.-1"); [no ack sent]
+ [threads] resume: enter
+ [threads] thread_needs_step_over: Need step over [LWP 713931]? Ignoring, should remain stopped
+ [threads] thread_needs_step_over: Need step over [LWP 713932]? Ignoring, should remain stopped
+ [threads] get_pc: pc is 0x555555555195
+ [threads] thread_needs_step_over: Need step over [LWP 713935]? No, no breakpoint found at 0x555555555195
+ [threads] get_pc: pc is 0x7ffff7d35a95
+ [threads] thread_needs_step_over: Need step over [LWP 713936]? No, no breakpoint found at 0x7ffff7d35a95
+ [threads] resume: Resuming, no pending status or step over needed
+ [threads] resume_one_thread: resuming LWP 713935
+ [threads] proceed_one_lwp: lwp 713935
+ [threads] resume_one_lwp_throw: continue from pc 0x555555555195
+ [threads] resume_one_lwp_throw: Resuming lwp 713935 (continue, signal 0, stop not expected)
+ [threads] resume_one_lwp_throw: NOW ptid=713935.713935.0 stopped=0 resumed=0
+ [threads] resume_one_thread: resuming LWP 713936
+ [threads] proceed_one_lwp: lwp 713936
+ [threads] resume_one_lwp_throw: continue from pc 0x7ffff7d35a95
+ [threads] resume_one_lwp_throw: Resuming lwp 713936 (continue, signal 0, stop not expected)
+ [threads] resume_one_lwp_throw: ptrace errno = 3 (No such process)
+ [threads] resume: exit
+ [threads] wait_1: enter
+ [threads] wait_1: [<all threads>]
+ [threads] wait_for_event_filtered: waitpid(-1, ...) returned 0, ERRNO-OK
+ [threads] resume_stopped_resumed_lwps: resuming stopped-resumed LWP LWP 713935.713936 at 7ffff7d35a95: step=0
+ [threads] resume_one_lwp_throw: continue from pc 0x7ffff7d35a95
+ [threads] resume_one_lwp_throw: Resuming lwp 713936 (continue, signal 0, stop not expected)
+ [threads] resume_one_lwp_throw: ptrace errno = 3 (No such process)
+ [threads] operator(): check_zombie_leaders: leader_pid=713931, leader_lp!=NULL=1, num_lwps=2, zombie=0
+ [threads] operator(): check_zombie_leaders: leader_pid=713935, leader_lp!=NULL=1, num_lwps=2, zombie=1
+ [threads] operator(): Thread group leader 713935 zombie (it exited, or another thread execd).
+ [threads] delete_lwp: deleting 713935
+ [threads] wait_for_event_filtered: exit (no unwaited-for LWP)
+ sigchld_handler
+ [threads] wait_1: ret = null_ptid, TARGET_WAITKIND_NO_RESUMED
+ [threads] wait_1: exit
+
+ What happens is:
+
+ - We resume the leader (713935) successfully.
+ - The leader exits.
+ - We resume the secondary thread (713936), we get ESRCH. This is
+ expected this the leader has exited.
+ - resume_one_lwp_throw throws, it's caught by resume_one_lwp.
+ - resume_one_lwp checks with check_ptrace_stopped_lwp_gone that the
+ failure can be explained by the LWP becoming zombie, and swallows the
+ error.
+ - Note that this means that the secondary lwp still has stopped==1.
+ - wait_1 is called, probably because linux_process_target::resume marks
+ the async pipe at the end.
+ - The exit event isn't ready yet, probably because the machine is under
+ load, so waitpid returns nothing.
+ - check_zombie_leaders detects that the leader is zombie and deletes
+ - We try to find a resumed (non-stopped) LWP to get an event from,
+ there's none since the leader (that was resumed) is now deleted, and
+ the secondary thread is still marked stopped.
+ wait_for_event_filtered returns -1, causing wait_1 to return
+ NO_RESUMED.
+
+ What I notice here is that there is some kind of race between the
+ availability of the process' exit notification and the call to wait_1
+ that results from marking the async pipe at the end of resume.
+
+ I think what we want from this wait_1 invocation is to keep waiting, as
+ we will eventually get thread exit notifications for both of our
+ threads.
+
+ The fix I came up with is to mark the secondary thread as !stopped (or
+ resumed) when we fail to resume it. This makes wait_1 see that there is
+ at least one resume lwp, so it won't return NO_RESUMED. I think this
+ makes sense to consider it resumed, because we are going to receive an
+ exit event for it. Here's the GDBserver logs with the fix applied:
+
+ [threads] resume: enter
+ [threads] thread_needs_step_over: Need step over [LWP 724595]? Ignoring, should remain stopped
+ [threads] thread_needs_step_over: Need step over [LWP 724596]? Ignoring, should remain stopped
+ [threads] get_pc: pc is 0x555555555195
+ [threads] thread_needs_step_over: Need step over [LWP 724597]? No, no breakpoint found at 0x555555555195
+ [threads] get_pc: pc is 0x7ffff7d35a95
+ [threads] thread_needs_step_over: Need step over [LWP 724598]? No, no breakpoint found at 0x7ffff7d35a95
+ [threads] resume: Resuming, no pending status or step over needed
+ [threads] resume_one_thread: resuming LWP 724597
+ [threads] proceed_one_lwp: lwp 724597
+ [threads] resume_one_lwp_throw: continue from pc 0x555555555195
+ [threads] resume_one_lwp_throw: Resuming lwp 724597 (continue, signal 0, stop not expected)
+ [threads] resume_one_lwp_throw: NOW ptid=724597.724597.0 stopped=0 resumed=0
+ [threads] resume_one_thread: resuming LWP 724598
+ [threads] proceed_one_lwp: lwp 724598
+ [threads] resume_one_lwp_throw: continue from pc 0x7ffff7d35a95
+ [threads] resume_one_lwp_throw: Resuming lwp 724598 (continue, signal 0, stop not expected)
+ [threads] resume_one_lwp_throw: ptrace errno = 3 (No such process)
+ [threads] resume: exit
+ [threads] wait_1: enter
+ [threads] wait_1: [<all threads>]
+ sigchld_handler
+ [threads] wait_for_event_filtered: waitpid(-1, ...) returned 0, ERRNO-OK
+ [threads] operator(): check_zombie_leaders: leader_pid=724595, leader_lp!=NULL=1, num_lwps=2, zombie=0
+ [threads] operator(): check_zombie_leaders: leader_pid=724597, leader_lp!=NULL=1, num_lwps=2, zombie=1
+ [threads] operator(): Thread group leader 724597 zombie (it exited, or another thread execd).
+ [threads] delete_lwp: deleting 724597
+ [threads] wait_for_event_filtered: sigsuspend'ing
+ sigchld_handler
+ [threads] wait_for_event_filtered: waitpid(-1, ...) returned 724598, ERRNO-OK
+ [threads] wait_for_event_filtered: waitpid 724598 received 0 (exited)
+ [threads] filter_event: 724598 exited
+ [threads] wait_for_event_filtered: waitpid(-1, ...) returned 724597, ERRNO-OK
+ [threads] wait_for_event_filtered: waitpid 724597 received 0 (exited)
+ [threads] wait_for_event_filtered: waitpid(-1, ...) returned 0, ERRNO-OK
+ sigchld_handler
+ [threads] wait_1: ret = LWP 724597.724598, exited with retcode 0
+ [threads] wait_1: exit
+
+ Change-Id: Idf0bdb4cb0313f1b49e4864071650cc83fb3c100
+
+2022-03-31 Simon Marchi <simon.marchi@efficios.com>
+
+ gdb/testsuite/tui: implement _csi_P proc
+ Since commit 3cd522938792 ("Change the pager to a ui_file"), I see these
+ errors when running gdb.tui/scroll.exp:
+
+ ERROR: invalid command name "_csi_P"
+ while executing
+ "::gdb_tcl_unknown _csi_P 2"
+ ("uplevel" body line 1)
+ invoked from within
+ "uplevel 1 ::gdb_tcl_unknown $args"
+ (procedure "::unknown" line 5)
+ invoked from within
+ "_csi_P 2"
+ ("eval" body line 1)
+ invoked from within
+ "eval _csi_$cmd $params"
+
+ It looks like GDB is emitting a CSI that it did not emit before, the
+ "Delete character" one:
+
+ https://vt100.net/docs/vt510-rm/DCH.html
+
+ Implement it.
+
+ Co-Authored-By: Andrew Burgess <aburgess@redhat.com>
+ Change-Id: I5bf86b6104d51b0623a26a69df83d1ca9a4851b7
+
+2022-03-31 Simon Marchi <simon.marchi@polymtl.ca>
+
+ gdb: fix use of fprintf_filtered in top.c
+ A race condition in how patches were pushed causes this build failure:
+
+ CXX top.o
+ /home/simark/src/binutils-gdb/gdb/top.c: In function ‘void print_gdb_configuration(ui_file*)’:
+ /home/simark/src/binutils-gdb/gdb/top.c:1622:3: error: ‘fprintf_filtered’ was not declared in this scope; did you mean ‘printf_unfiltered’?
+ 1622 | fprintf_filtered (stream, _("\
+ | ^~~~~~~~~~~~~~~~
+
+ fprintf_filtered has been removed, gdb_printf must be used now. Fix
+ this.
+
+ Change-Id: I6a172ba0d53dab2e7cc43ed0ed2696c82925245b
+
+2022-03-31 Richard Sandiford <richard.sandiford@arm.com>
+
+ aarch64: Relax check for RNG system registers
+ FEAT_RNG is an optional Armv8.5-A extension, but it can be backported
+ to earlier architectures as well. GAS previously made the RNG registers
+ conditional on having both armv8.5-a and +rng, but only +rng should be
+ required.
+
+ This seems to be the only feature that was handled like this.
+
+ opcodes/
+ * aarch64-opc.c (SR_RNG): Don't require V8_5.
+
+ gas/
+ * testsuite/gas/aarch64/rng-1.s, testsuite/gas/aarch64/rng-1.d: New
+ test.
+
+2022-03-31 Eli Zaretskii <eliz@gnu.org>
+
+ * gdb/top.c (print_gdb_configuration): Announce --enable-threading.
+ This includes the reporting of --enable/disable-threading as part of
+ the GDB configuration description.
+
+2022-03-31 Simon Marchi <simon.marchi@efficios.com>
+
+ gdb/infrun: add reason parameter to stop_all_threads
+ Add a "reason" parameter, only used to show in debug messages what is
+ the reason for stopping all threads. This helped me understand the
+ debug logs while adding some new uses of stop_all_threads, so I am
+ proposing to merge it.
+
+ Change-Id: I66c8c335ebf41836a7bc3d5fe1db92c195f65e55
+
+2022-03-31 Simon Marchi <simon.marchi@efficios.com>
+
+ gdb/testsuite: update copyright years in gdb.base/vfork-follow-parent.*
+ I forgot to do this before pushing the previous commit.
+
+ Change-Id: Ia343f702e8357d0fd109e9ddd778973e91862805
+
+2022-03-31 Simon Marchi <simon.marchi@efficios.com>
+
+ gdb: test vfork + follow-fork-mode=parent + detach-on-fork=off
+ The particular behavior we have when using that combination of settings
+ doesn't seem tested at all (at least, I don't find it if I grep for "Can
+ not resume the parent process"). Add a simple test for that.
+
+ Change-Id: Ib9454a615abba661b42f1b15056df73ed1bcd4c5
+
+2022-03-31 Nick Clifton <nickc@redhat.com>
+
+ Accept the + character as part of filenames for MRI scripts.
+
+2022-03-31 Rainer Orth <ro@CeBiTec.Uni-Bielefeld.DE>
+
+ Fix procfs.c compilation
+ procfs.c doesn't compile on Solaris:
+
+ /vol/src/gnu/gdb/hg/master/local/gdb/procfs.c: In member function ‘virtual bool procfs_target::info_proc(const char*, info_proc_what)’:
+ /vol/src/gnu/gdb/hg/master/local/gdb/procfs.c:3302:3: error: ‘gdb_argv’ was not declared in this scope
+ 3302 | gdb_argv built_argv (args);
+ | ^~~~~~~~
+ /vol/src/gnu/gdb/hg/master/local/gdb/procfs.c:3303:20: error: ‘built_argv’ was not declared in this scope; did you mean ‘buildargv’?
+ 3303 | for (char *arg : built_argv)
+ | ^~~~~~~~~~
+ | buildargv
+
+ Fixed by including "gdbsupport/buildargv.h".
+
+ Tested on amd64-pc-solaris2.11, sparcv9-sun-solaris2.11.
+
+2022-03-31 GDB Administrator <gdbadmin@sourceware.org>
+
+ Automatic date update in version.in
+
+2022-03-30 Simon Marchi <simon.marchi@polymtl.ca>
+
+ gdb/testsuite: add tests for Term
+ While trying to review Andrew's patch here [1], I thought I spotted a
+ bug in the handling of a CSI, but I had no way to know for sure. So I
+ thought it would be useful to have unit tests for the handling of
+ control characters and control sequences of our toy terminal
+ implementation. It might help avoid chasing bugs in the GDB TUI when in
+ reality it's a problem with the testsuite's terminal implementation.
+
+ Add the gdb.tui/tuiterm.exp file to do that. All currently supported
+ control sequences and characters are tested, except _csi_m (the one that
+ handles colors and stuff). _csi_m should probably be tested too, but it
+ will require more work.
+
+ Fix a few issues that the tests spotted:
+
+ - backspace: according to [3] (table 4-1), a backspace when the cursor
+ is at the beginning of a line should have no effect. Our
+ implementation did wrap to the end of the previous line. Change our
+ implementation to match the doc (and the test).
+ - insert character: this control sequence is supposed to insert blank
+ characters, shifting all the rest of the line right. The current
+ implementation moves N characters right, but it overwrites the
+ characters on the right instead of shifting them. It also doesn't
+ insert blank characters at the cursor.
+ - Cursor down, forward, next line: off-by-one error when reaching the
+ end of the display.
+ - erase in display, line: off-by-one errors.
+ - vertical line position absolute: allowed setting the cursor outside
+ the display, when it should clamp it to the display size.
+
+ I found that this web page [2] gave some good clues on the expected
+ behavior of some control characters or sequences that some other pages
+ didn't.
+
+ [1] https://sourceware.org/pipermail/gdb-patches/2022-March/186433.html
+ [2] https://docs.microsoft.com/en-us/windows/console/console-virtual-terminal-sequences
+ [3] https://vt100.net/docs/vt510-rm/chapter4.html#S4.3.3
+
+ Change-Id: Iab4141fdcfb7459d1b7c45cc63bd1fcb50a78d5d
+
+2022-03-30 Tom Tromey <tom@tromey.com>
+
+ Only allow QUIT on the main thread
+ Pedro pointed out that gdb worker threads should not react to quits.
+ While I don't think that the new DWARF reader can call QUIT from a
+ worker thread (and I don't think the existing minsym threading code
+ can either), it seems safest to address this before checking in the
+ new code. This patch arranges for the QUIT macro to only work on the
+ main thread.
+
+2022-03-30 Tom Tromey <tromey@adacore.com>
+
+ Use gdb_printf and gdb_vprintf in more places
+ Luis pointed out that I missed a spot in the gdb_printf conversion --
+ namely aarch64-nat.c. While looking at this, I found another spot in
+ darwin-nat.c that I also missed. I can't build either of these, but I
+ think this patch should fix the problems.
+
+ Consolidate definition of current_directory
+ I noticed that both gdbserver and gdb define current_directory.
+ However, as it is referenced by gdbsupport, it seemed better to define
+ it there as well. This patch also moves the declaration to
+ pathstuff.h. Tested by rebuilding.
+
+2022-03-30 Tom Tromey <tromey@adacore.com>
+
+ Decode "dynamic" interface types in Ada
+ In Ada, if a class implements an interface and has a dynamic
+ superclass, then the "offset to top" -- the offset that says how to
+ turn a pointer to the interface into a pointer to the whole object --
+ is stored in the object itself. This patch changes GDB to understand
+ this.
+
+ Because this only touches Ada code, and because Joel already reviewed
+ it internally, I am checking it in.
+
+2022-03-30 Jeff Law <jeffreyalaw@gmail.com>
+
+ Fix for MUL instruction on the v850
+ * sim/v850/simops.c (Multiply64): Properly test if we need to
+ negate either of the operands.
+
+ * sim/testsuite/v850/mul.cgs: New test.
+
+2022-03-30 GDB Administrator <gdbadmin@sourceware.org>
+
+ Automatic date update in version.in
+
+2022-03-29 Tom Tromey <tom@tromey.com>
+
+ Remove two unused hooks
+ I noticed that a couple of deprecated hooks aren't ever called, so
+ they can't really be used by Insight. This patch removes them
+ entirely. I checked the Insight sources, and these aren't mentioned
+ there, either.
+
+2022-03-29 Tom Tromey <tom@tromey.com>
+
+ Remove unnecessary calls to wrap_here and gdb_flush
+ Various spots in gdb currently know about the wrap buffer, and so are
+ careful to call wrap_here to be certain that all output has been
+ flushed.
+
+ Now that the pager is just an ordinary stream, this isn't needed, and
+ a simple call to gdb_flush is enough.
+
+ Similarly, there are places where gdb prints to gdb_stderr, but first
+ flushes gdb_stdout. stderr_file already flushes gdb_stdout, so these
+ aren't needed.
+
+2022-03-29 Tom Tromey <tom@tromey.com>
+
+ Minor comment updates in utils.h
+ This patch updates some comments in utils.h to more closely reflect
+ the new reality.
+
+ Remove vfprintf_styled
+ Nothing calls vfprintf_styled any more, so remove it.
+
+ Remove ui_out_flag::unfiltered_output
+ There is no longer any need for ui_out_flag::unfiltered_output --
+ nothing ever sets this flag. This used to be needed to make the
+ _unfiltered output work, but now only printf_unfiltered can be used,
+ and it uses the puts_unfiltered method. This patch removes the flag
+ and the dead code.
+
+ Rename fprintf_symbol_filtered
+ fprintf_symbol_filtered is misnamed, because whether filtering happens
+ is now up to the stream. This renames it to fprintf_symbol, which
+ isn't a great name (the first "f" doesn't mean much and the second one
+ is truly meaningless here), but "print_symbol" was already taken.
+
+ Rename puts_filtered_tabular
+ puts_filtered_tabular is now misnamed, because whether filtering
+ happens is now up to the stream. So, rename it. (This function is
+ pretty weird, and should probably be rewritten to avoid using the
+ chars_printed global, and moved into objc-lang.c. However, I haven't
+ done so.)
+
+ Rename print_spaces_filtered
+ print_spaces_filtered is now misnamed, because whether filtering
+ happens is up to the stream. So, rename it.
+
+ Unify gdb printf functions
+ Now that filtered and unfiltered output can be treated identically, we
+ can unify the printf family of functions. This is done under the name
+ "gdb_printf". Most of this patch was written by script.
+
+ Unify gdb putc functions
+ Now that filtered and unfiltered output can be treated identically, we
+ can unify the putc family of functions. This is done under the name
+ "gdb_putc". Most of this patch was written by script.
+
+ Unify gdb puts functions
+ Now that filtered and unfiltered output can be treated identically, we
+ can unify the puts family of functions. This is done under the name
+ "gdb_puts". Most of this patch was written by script.
+
+ Unify vprintf functions
+ Now that filtered and unfiltered output can be treated identically, we
+ can unify the vprintf family of functions: vprintf_filtered,
+ vprintf_unfiltered, vfprintf_filtered and vfprintf_unfiltered. (For
+ the gdb_stdout variants, recall that only printf_unfiltered gets truly
+ unfiltered output at this point.) This removes one such function and
+ renames the remaining two to "gdb_vprintf". All callers are updated.
+ Much of this patch was written by script.
+
+ Remove fputs_styled_unfiltered
+ fputs_styled_unfiltered is only called from cli_ui_out, so remove it.
+ This area will be further simplified in future patches.
+
+2022-03-29 Tom Tromey <tom@tromey.com>
+
+ Change the pager to a ui_file
+ This rewrites the output pager as a ui_file implementation.
+
+ A new header is introduced to declare the pager class. The
+ implementation remains in utils.c for the time being, because there
+ are some static globals there that must be used by this code. (This
+ could be cleaned up at some future date.)
+
+ I went through all the text output in gdb to ensure that this change
+ should be ok. There are a few cases:
+
+ * Any existing call to printf_unfiltered is required to be avoid the
+ pager. This is ensured directly in the implementation.
+
+ * All remaining calls to the f*_unfiltered functions -- the ones that
+ take an explicit ui_file -- either send to an unfiltered stream
+ (e.g., gdb_stderr), which is obviously ok; or conditionally send to
+ gdb_stdout
+
+ I investigated all such calls by searching for:
+
+ grep -e '\bf[a-z0-9_]*_unfiltered' *.[chyl] */*.[ch] | grep -v gdb_stdlog | grep -v gdb_stderr
+
+ This yields a number of candidates to check.
+
+ * The breakpoint _print_recreate family, and
+ save_trace_state_variables. These are used for "save" commands
+ and so are fine.
+
+ * Things printing to a temporary stream. Obviously ok.
+
+ * Disassembly selftests.
+
+ * print_gdb_help - this is non-obvious, but ok because paging isn't
+ yet enabled at this point during startup.
+
+ * serial.c - doens't use gdb_stdout
+
+ * The code in compile/. This is all printing to a file.
+
+ * DWARF DIE dumping - doesn't reference gdb_stdout.
+
+ * Calls to the _filtered form -- these are all clearly ok, because if
+ they are using gdb_stdout, then filtering will still apply; and if
+ not, then filtering never applied and still will not.
+
+ Therefore, at this point, there is no longer any distinction between
+ all the other _filtered and _unfiltered calls, and they can be
+ unified.
+
+ In this patch, take special note of the vfprintf_maybe_filtered and
+ ui_file::vprintf change. This is one instance of the above idea,
+ erasing the distinction between filtered and unfiltered -- in this
+ part of the change, the "unfiltered_output" flag is never passe to
+ cli_ui_out. Subsequent patches will go much further in this
+ direction.
+
+ Also note the can_emit_style_escape changes in ui-file.c. Checking
+ against gdb_stdout or gdb_stderr was always a bit of a hack; and now
+ it is no longer needed, because this is decision can be more fully
+ delegated to the particular ui_file implementation.
+
+ ui_file::can_page is removed, because this patch removed the only call
+ to it.
+
+ I think this is the main part of fixing PR cli/7234.
+
+ Bug: https://sourceware.org/bugzilla/show_bug.cgi?id=7234
+
+2022-03-29 Tom Tromey <tom@tromey.com>
+
+ Remove vfprintf_styled_no_gdbfmt
+ This removes vfprintf_styled_no_gdbfmt, inlining it at the sole point
+ of call.
+
+ Add style-escape methods to ui_file
+ This adds emit_style_escape and reset_style methods to ui_file. These
+ aren't used yet, but they will be once the pager is converted to be a
+ ui_file subclass.
+
+ Add puts_unfiltered method to ui_file
+ When the pager is rewritten as a ui_file, gdb will still need a way to
+ bypass the filtering. After examining a few approaches, I chose this
+ patch, which adds a puts_unfiltered method to ui_file. For most
+ implementations of ui_file, this will just delegate to puts. This
+ patch also switches printf_unfiltered to use the new method.
+
+ Only have one API for unfiltered output
+ At the end of this series, the use of unfiltered output will be very
+ restricted -- only places that definitely need it will use it. To
+ this end, I thought it would be good to reduce the number of
+ _unfiltered APIs that are exposed. This patch changes gdb so that
+ only printf_unfiltered exists. (After this patch, the f* variants
+ still exist as well, but those will be removed later.)
+
+2022-03-29 Tom Tromey <tom@tromey.com>
+
+ Remove some uses of printf_unfiltered
+ A number of spots call printf_unfiltered only because they are in code
+ that should not be interrupted by the pager. However, I believe these
+ cases are all handled by infrun's blanket ban on paging, and so can be
+ converted to the default (_filtered) API.
+
+ After this patch, I think all the remaining _unfiltered calls are ones
+ that really ought to be. A few -- namely in complete_command -- could
+ be replaced by a scoped assignment to pagination_enabled, but for the
+ remainder, the code seems simple enough like this.
+
+2022-03-29 Tom Tromey <tom@tromey.com>
+
+ Use unfiltered output in annotate.c
+ It seems to me that annotations should not be filtered. While it
+ might be weird for an annotation-based UI to use the pager, it's not,
+ I think, out of the question. This patch makes this change.
+
+2022-03-29 Tankut Baris Aktemur <tankut.baris.aktemur@intel.com>
+ Aleksandar Paunovic <aleksandar.paunovic@intel.com>
+
+ gdb/remote: use current_inferior in read_ptid if multi-process not supported
+ When parsing the ptid out of a reply package, if the multi-process
+ extensions are not supported, use current_inferior's pid as the pid of
+ the reported thread, instead of inferior_ptid. This is needed because
+ the inferior_ptid may be null_ptid although a legit context exists,
+ due to a prior context switch via switch_to_inferior_no_thread.
+
+ Below is a scenario that illustrates what could go wrong. First,
+ setup a multi-target scenario. This is needed, because in a
+ multi-target setting, the inferior_ptid is cleared out before waiting
+ on targets. The second inferior below sits on top of a remote target.
+ Multi-process packets are disabled.
+
+ $ # First, spawn a process with PID 26253 to attach to later.
+ $ gdb-up a.out
+ Reading symbols from a.out...
+ (gdb) maint set target-non-stop on
+ (gdb) set remote multiprocess-feature-packet off
+ (gdb) start
+ ...
+ (gdb) add-inferior -no-connection
+ [New inferior 2]
+ Added inferior 2
+ (gdb) inferior 2
+ [Switching to inferior 2 [<null>] (<noexec>)]
+ (gdb) target extended-remote | gdbserver --multi -
+ Remote debugging using | gdbserver --multi -
+ Remote debugging using stdio
+ (gdb) attach 26253
+ Attaching to Remote target
+ Attached; pid = 26253
+ [New Thread 26253]
+ [New inferior 3]
+ Reading /tmp/a.out from remote target...
+ ...
+ [New Thread 26253]
+ ...
+ Reading /usr/local/lib/debug/....debug from remote target...
+ >>> GDB seems to hang here.
+
+ After attaching to a process and reading some library files, GDB
+ seems to hang. One interesting thing to note is that
+
+ [New Thread 26253]
+
+ appears twice. We also see
+
+ [New inferior 3]
+
+ Running the same scenario with "debug infrun on" reveals more details.
+
+ ...
+ (gdb) attach 26253
+ [infrun] scoped_disable_commit_resumed: reason=attaching
+ Attaching to Remote target
+ Attached; pid = 26253
+ [New Thread 26253]
+ [infrun] infrun_async: enable=1
+ [infrun] attach_command: immediately after attach:
+ [infrun] attach_command: thread 26253.26253.0, executing = 1, resumed = 0, state = RUNNING
+ [infrun] clear_proceed_status_thread: 26253.26253.0
+ [infrun] reset: reason=attaching
+ [infrun] maybe_set_commit_resumed_all_targets: not requesting commit-resumed for target native, no resumed threads
+ [infrun] maybe_set_commit_resumed_all_targets: enabling commit-resumed for target extended-remote
+ [infrun] fetch_inferior_event: enter
+ [infrun] scoped_disable_commit_resumed: reason=handling event
+ [infrun] do_target_wait: Found 2 inferiors, starting at #1
+ [infrun] random_pending_event_thread: None found.
+ [infrun] print_target_wait_results: target_wait (-1.0.0 [Thread 0], status) =
+ [infrun] print_target_wait_results: 26253.26253.0 [Thread 26253],
+ [infrun] print_target_wait_results: status->kind = STOPPED, sig = GDB_SIGNAL_0
+ [infrun] handle_inferior_event: status->kind = STOPPED, sig = GDB_SIGNAL_0
+ [infrun] start_step_over: enter
+ [infrun] start_step_over: stealing global queue of threads to step, length = 0
+ [infrun] operator(): step-over queue now empty
+ [infrun] start_step_over: exit
+ [infrun] context_switch: Switching context from 0.0.0 to 26253.26253.0
+ [infrun] handle_signal_stop: stop_pc=0x7f849d8cf151
+ [infrun] stop_waiting: stop_waiting
+ [infrun] stop_all_threads: starting
+ [infrun] stop_all_threads: pass=0, iterations=0
+ [New inferior 3]
+ Reading /tmp/a.out from remote target...
+ warning: File transfers from remote targets can be slow. Use "set sysroot" to access files locally instead.
+ Reading /tmp/a.out from remote target...
+ Reading symbols from target:/tmp/a.out...
+ [New Thread 26253]
+ [infrun] stop_all_threads: 4723.4723.0 not executing
+ [infrun] stop_all_threads: 26253.26253.0 not executing
+ [infrun] stop_all_threads: 42000.26253.0 executing, need stop
+ [infrun] print_target_wait_results: target_wait (-1.0.0 [Thread 0], status) =
+ [infrun] print_target_wait_results: -1.0.0 [Thread 0],
+ [infrun] print_target_wait_results: status->kind = IGNORE
+ [infrun] print_target_wait_results: target_wait (-1.0.0 [Thread 0], status) =
+ [infrun] print_target_wait_results: -1.0.0 [Thread 0],
+ [infrun] print_target_wait_results: status->kind = IGNORE
+
+ GDB tried to stop Thread 42000.26253.0, which does not exist, and we
+ are waiting for a stop event that will never happen. The PID in
+ '42000.26253.0', namely 42000, is the PID of magic_null_ptid.
+ It comes from gdb/remote.c:read_ptid:
+
+ /* Since the stub is not sending a process id, then default to
+ what's in inferior_ptid, unless it's null at this point. If so,
+ then since there's no way to know the pid of the reported
+ threads, use the magic number. */
+ if (inferior_ptid == null_ptid)
+ pid = magic_null_ptid.pid ();
+ else
+ pid = inferior_ptid.pid ();
+
+ if (obuf)
+ *obuf = pp;
+ return ptid_t (pid, tid);
+
+ Because multi-process was turned off, GDB did not parse an explicitly
+ specified PID. Furthermore, inferior_ptid == null_ptid, and
+ eventually GDB picked the PID from magic_null_ptid.
+
+ If target-non-stop is not turned on at the beginning, the same bug
+ reveals itself as a duplicated thread as shown below.
+
+ # Same setup as above, without 'maint set target-non-stop on'.
+ ...
+ (gdb) attach 26253
+ Attaching to Remote target
+ Attached; pid = 26253
+ [New inferior 3]
+ ...
+ [New Thread 26253]
+ ...
+ (gdb) info threads
+ Id Target Id Frame
+ 1.1 process 13517 "a.out" main () at test.c:3
+ * 2.1 Thread 26253 "a.out" 0x00007f12750c5151 in read () from target:/lib/x86_64-linux-gnu/libc.so.6
+ 3.1 Thread 26253 "a.out" Remote 'g' packet reply is too long (expected 560 bytes, got 2496 bytes): 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
+ (gdb)
+
+ Fix the problem by preferring current_inferior()'s pid instead of
+ magic_null_ptid.
+
+ Regression-tested on X86-64 Linux.
+
+2022-03-29 Andrew Burgess <aburgess@redhat.com>
+
+ gdb/testsuite: fix test failure when building against readline v7
+ The test added in the commit:
+
+ commit a6b413d24ccc5d76179bab866834e11fd6fec294
+ Date: Fri Mar 11 14:44:03 2022 +0000
+
+ gdb: work around prompt corruption caused by bracketed-paste-mode
+
+ Was not written with readline 7 in mind, only readline 8+. Between
+ readline 7 and 8 the escape sequence used to disable bracketed paste
+ mode changed, an additional '\r' character was added to the end. In
+ fact, it was the addition of this '\r' character that triggered the
+ issue for which the above commit is part of the solution.
+
+ Anyway, the test tries to spot the case where the output from GDB is
+ not perfect, but does have the above work around applied. However,
+ the pattern in the test assumes that the problematic '\r' will be
+ present, and this is only true for readline 8+. With readline 7 the
+ test was failing.
+
+ In this commit I generalise the pattern a little so that the test will
+ still KFAIL with readline 7.
+
+ It's a little unfortunate that the test is KFAILing with readline 7,
+ as without the problematic '\r' there's actually no reason that GDB
+ couldn't "do the right thing" in this case, in which case, the test
+ would PASS, but that would require changes within GDB itself.
+
+ My preference then is that initially we patch the test to get it
+ KFAILing, then in a separate commit I can modify GDB so that it can
+ PASS with readline 7.
+
+2022-03-29 Andrew Burgess <aburgess@redhat.com>
+
+ gdb/testsuite: fix copy & paste error in gdb.python/py-format-address.exp
+ The test gdb.python/py-format-address.exp, added in commit:
+
+ commit 25209e2c6979c3838e14e099f0333609810db280
+ Date: Sat Oct 23 09:59:25 2021 +0100
+
+ gdb/python: add gdb.format_address function
+
+ included 3 copy & paste errors where the wrong address was used in the
+ expected output patterns.
+
+ The test compiles two almost identical test binaries (one function
+ changes its name, that's the only difference), two inferiors are
+ created, each inferior using one of the test binaries.
+
+ We then take the address of the name changing function in both
+ inferiors ('foo' in inferior 1 and 'bar' in inferior 2) and the tests
+ are carried out using these addresses.
+
+ What we're checking for is that symbols 'foo' and 'bar' show up in the
+ correct inferior, and that (as this test is for a Python API feature),
+ the user can have one inferior selected, but ask about the other
+ inferior, and see the correct symbol in the result.
+
+ The hope is that the two binaries will be laid out identically by the
+ compiler, and that 'foo' and 'bar' will be at the same address. This
+ is fine, unless the executable is compiled as PIE (position
+ independent executable), in which case there is a problem.
+
+ The problem is that though inferior 1 is set running, the inferior 2
+ never is. If the executables are compiled as PIE, then the address in
+ the inferior 2 will not have been resolved, while the address in the
+ inferior 1 will have been, and so the two addresses we use in the
+ tests will be different.
+
+ This issue was reported here:
+
+ https://sourceware.org/pipermail/gdb-patches/2022-March/186911.html
+
+ The first part of the fix is to use the correct address variable in
+ the expected output patterns, with this change the tests pass even
+ when the executables are compiled as PIE.
+
+ A second part of this fix is to pass the 'nopie' option when we
+ compile the tests, this should ensure that the address obtained in
+ inferior 2 is the same as the address from inferior 1, which makes the
+ test more useful.
+
+2022-03-29 Andrew Burgess <aburgess@redhat.com>
+
+ gdb/mi: fix use after free of frame_info causing spurious notifications
+ In commit:
+
+ commit a2757c4ed693cef4ecc4dcdcb2518353eb6b3c3f
+ Date: Wed Mar 16 15:08:22 2022 +0000
+
+ gdb/mi: consistently notify user when GDB/MI client uses -thread-select
+
+ Changes were made to GDB to address some inconsistencies in when
+ notifications are sent from a MI terminal to a CLI terminal (when
+ multiple terminals are in use, see new-ui command).
+
+ Unfortunately, in order to track when the currently selected frame has
+ changed, that commit grabs a frame_info pointer before and after an MI
+ command has executed, and compares the pointers to see if the frame
+ has changed.
+
+ This is not safe.
+
+ If the frame cache is deleted for any reason then the frame_info
+ pointer captured before the command started, is no longer valid, and
+ any comparisons based on that pointer are undefined.
+
+ This was leading to random test failures for some folk, see:
+
+ https://sourceware.org/pipermail/gdb-patches/2022-March/186867.html
+
+ This commit changes GDB so we no longer hold frame_info pointers, but
+ instead store the frame_id and frame_level, this is safe even when the
+ frame cache is flushed.
+
+2022-03-29 Jan Beulich <jbeulich@suse.com>
+
+ bfd/Dwarf2: gas doesn't mangle names
+ Include the language identifier emitted by gas in the set of ones where
+ no mangled names are expected. Even if there could be "hand-mangled"
+ names, gas doesn't emit DW_AT_linkage_name in the first place.
+
+ bfd/Dwarf2: make find-nearest-line returned function name consistent
+ Prior to entering the enclosing "else if()" the earlier associated if()
+ checks function->is_linkage and, if set, uses function->name. The
+ comment in patch context precedes (and explains) the setting
+ function->is_linkage. Yet with the flag set, we should then also return
+ the function name, just like said earlier if() would do when we came
+ here a 2nd time for the same "addr". And indeed passing the same address
+ twice on addr2line's command line would resolve the function for the 2nd
+ instance, but not for the 1st (if this code path is taken). (This,
+ obviously, is particularly relevant when there's no ELF symbol table in
+ the first place, like would be the case - naturally - in PE/COFF
+ binaries, for example.)
+
+ gas/Dwarf: special-case .linefile only for macros
+ Restrict the PR gas/16908 workaround to just macros, matching the
+ original intention as well as the comment there. For constructs like
+ .irp or .rept the reasoning doesn't apply, as there's no separate
+ "invocation" point which may be of interest to record (for, as said
+ there, short macros).
+
+2022-03-29 Jan Beulich <jbeulich@suse.com>
+
+ RISC-V: correct FCVT.Q.L[U]
+ While the spec isn't explicit about this, it pointing out the similarity
+ with the D extension ought to extend to the ignoring of a meaningless
+ rounding mode: "Note FCVT.D.W[U] always produces an exact result and is
+ unaffected by rounding mode." Hence the chosen encodings also ought to
+ match.
+
+ Note that to avoid breaking existing code the forms with a 3rd operand
+ are not removed, which means there continues to be a difference to
+ FCVT.D.W[U].
+
+2022-03-29 Mike Frysinger <vapier@gentoo.org>
+
+ sim: add arch/.gdbinit stub scripts
+ Make it easy to load the common gdbinit script even when running in
+ the arch/ subdir instead of the top-level sim dir.
+
+2022-03-29 Alan Modra <amodra@gmail.com>
+
+ asan: heap buffer overflow in pa_chk_field_selector
+ The buffer overflow showed up running the gas "all macro" test.
+
+ PR 29005
+ * config/tc-hppa.c (pa_chk_field_selector): Don't read past end
+ of line.
+
+2022-03-29 GDB Administrator <gdbadmin@sourceware.org>
+
+ Automatic date update in version.in
+
+2022-03-28 Tom Tromey <tom@tromey.com>
+
+ Add Rust parser check for end of expression
+ I noticed that "print 5," passed in Rust -- the parser wasn't checking
+ that the entire input was used. This patch fixes the problem. This
+ in turn pointed out another bug in the parser, namely that it didn't
+ lex the next token after handling a string token. This is also fixed
+ here.
+
+2022-03-28 Tom Tromey <tom@tromey.com>
+
+ Switch gdb_stdlog to use timestamped_file
+ Currently, timestamps for logging are done by looking for the use of
+ gdb_stdlog in vfprintf_unfiltered. This seems potentially buggy, in
+ that during logging or other redirects (like execute_fn_to_ui_file) we
+ might have gdb_stdout==gdb_stdlog and so, conceivably, wind up with
+ timestamps in a log when they were not desired.
+
+ It seems better, instead, for timestamps to be a property of the
+ ui_file itself.
+
+ This patch changes gdb to use the new timestamped_file for gdb_stdlog
+ where appropriate, and removes the special case from
+ vfprintf_unfiltered.
+
+ Note that this may somewhat change the output in some cases -- in
+ particular, when going through execute_fn_to_ui_file (or the _string
+ variant), timestamps won't be emitted. This could be fixed in those
+ functions, but it wasn't clear to me whether this is really desirable.
+
+ Note also that this changes the TUI to send gdb_stdlog to gdb_stderr.
+ I imagine that the previous use of gdb_stdout here was inadvertent.
+ (And in any case it probably doesn't matter.)
+
+2022-03-28 Tom Tromey <tom@tromey.com>
+
+ Add new timestamped_file class
+ This adds a "timestamped_file" subclass of ui_file. This class adds a
+ timestamp to its output when appropriate. That is, it follows the
+ rule already used in vfprintf_unfiltered of adding a timestamp at most
+ once per write.
+
+ The new class is not yet used.
+
+2022-03-28 Tom Tromey <tom@tromey.com>
+
+ Use unique_ptr in CLI logging code
+ This changes the CLI logging code to avoid manual memory management
+ (to the extent possible) by using unique_ptr in a couple of spots.
+ This will come in handy in a later patch.
+
+2022-03-28 Tom Tromey <tom@tromey.com>
+
+ Simplify the CLI set_logging logic
+ The CLI's set_logging logic seemed unnecessarily complicated to me.
+ This patch simplifies it, with an eye toward changing it to use RAII
+ objects in a subsequent patch.
+
+ I did not touch the corresponding MI code. That code seems incorrect
+ (nothing ever uses raw_stdlog, and nothing ever sets
+ saved_raw_stdlog). I didn't attempt to fix this, because I question
+ whether this is even useful for MI.
+
+2022-03-28 Tom Tromey <tromey@adacore.com>
+
+ Handle multiple addresses in call_site_target
+ A large customer program has a function that is partitioned into hot
+ and cold parts. A variable in a callee of this function is described
+ using DW_OP_GNU_entry_value, but gdb gets confused when trying to find
+ the caller. I tracked this down to dwarf2_get_pc_bounds interpreting
+ the function's changes so that the returned low PC is the "wrong"
+ function.
+
+ Intead, when processing DW_TAG_call_site, the low PC of each range in
+ DW_AT_ranges should be preserved in the call_site_target. This fixes
+ the variable lookup in the test case I have.
+
+ I didn't write a standalone test for this as it seemed excessively
+ complicated.
+
+2022-03-28 Tom Tromey <tromey@adacore.com>
+
+ Change call_site_target to iterate over addresses
+ In order to handle the case where a call site target might refer to
+ multiple addresses, we change the code to use a callback style. Any
+ spot using call_site_target::address now passes in a callback function
+ that may be called multiple times.
+
+2022-03-28 Tom Tromey <tromey@adacore.com>
+
+ Change call_site_find_chain_1 to work recursively
+ call_site_find_chain_1 has a comment claiming that recursive calls
+ would be too expensive. However, I doubt this is so expensive; and
+ furthermore the explicit state management approach here is difficult
+ both to understand and to modify. This patch changes this code to use
+ explicit recursion, so that a subsequent patch can generalize this
+ code without undue trauma.
+
+ Additionally, I think this patch detects a latent bug in the recursion
+ code. (It's hard for me to be completely certain.) The bug is that
+ when a new target_call_site is entered, the code does:
+
+ if (target_call_site)
+ {
+ if (addr_hash.insert (target_call_site->pc ()).second)
+ {
+ /* Successfully entered TARGET_CALL_SITE. */
+
+ chain.push_back (target_call_site);
+ break;
+ }
+ }
+
+ Here, if entering the target_call_site fails, then any tail_call_next
+ elements in this call site are not visited. However, if this code
+ does happen to enter a call site, then the tail_call_next elements
+ will be visited during backtracking. This applies when doing the
+ backtracking as well -- it will only continue through a given chain as
+ long as each element in the chain can successfully be visited.
+
+ I'd appreciate some review of this. If this behavior is intentional,
+ it can be added to the new implementation.
+
+2022-03-28 Tom Tromey <tromey@adacore.com>
+
+ Constify chain_candidate
+ While investigating this bug, I wasn't sure if chain_candidate might
+ update 'chain'. I changed it to accept a const reference, making it
+ clear that it cannot. This simplifies the code a tiny bit as well.
+
+ Make call_site_target members private
+ This makes the data members of call_site_target 'private'. This lets
+ us remove most of its public API. call_site_to_target_addr is changed
+ to be a method of this type. This is a preparatory refactoring for
+ the fix at the end of this series.
+
+ Change call_site_target to use custom type and enum
+ call_site_target reuses field_loc_kind and field_location. However,
+ it has never used the full range of the field_loc_kind enum. In a
+ subsequent patch, I plan to add a new 'kind' here, so it seemed best
+ to avoid this reuse and instead introduce new types here.
+
+2022-03-28 GDB Administrator <gdbadmin@sourceware.org>
+
+ Automatic date update in version.in
+
+2022-03-27 GDB Administrator <gdbadmin@sourceware.org>
+
+ Automatic date update in version.in
+
+2022-03-26 Tom Tromey <tom@tromey.com>
+
+ Remove an unused declaration from value.h
+ value.h has a declaration of value_print_array_elements that is
+ incorrect. In C, this would have been an error, but in C++ this is a
+ declaration of an overload that is neither defined nor used. This
+ patch removes the declaration.
+
+2022-03-26 GDB Administrator <gdbadmin@sourceware.org>
+
+ Automatic date update in version.in
+
+2022-03-25 Nick Alcock <nick.alcock@oracle.com>
+
+ libtool.m4: fix the NM="/nm/over/here -B/option/with/path" case
+ My previous nm patch handled all cases but one -- if the user set NM in
+ the environment to a path which contained an option, libtool's nm
+ detection tries to run nm against a copy of nm with the options in it:
+ e.g. if NM was set to "nm --blargle", and nm was found in /usr/bin, the
+ test would try to run "/usr/bin/nm --blargle /usr/bin/nm --blargle".
+ This is unlikely to be desirable: in this case we should run
+ "/usr/bin/nm --blargle /usr/bin/nm".
+
+ Furthermore, as part of this nm has to detect when the passed-in $NM
+ contains a path, and in that case avoid doing a path search itself.
+ This too was thrown off if an option contained something that looked
+ like a path, e.g. NM="nm -B../prev-gcc"; libtool then tries to run
+ "nm -B../prev-gcc nm" which rarely works well (and indeed it looks
+ to see whether that nm exists, finds it doesn't, and wrongly concludes
+ that nm -p or whatever does not work).
+
+ Fix all of these by clipping all options (defined as everything
+ including and after the first " -") before deciding whether nm
+ contains a path (but not using the clipped value for anything else),
+ and then removing all options from the path-modified nm before
+ looking to see whether that nm existed.
+
+ NM=my-nm now does a path search and runs e.g.
+ /usr/bin/my-nm -B /usr/bin/my-nm
+
+ NM=/usr/bin/my-nm now avoids a path search and runs e.g.
+ /usr/bin/my-nm -B /usr/bin/my-nm
+
+ NM="my-nm -p../wombat" now does a path search and runs e.g.
+ /usr/bin/my-nm -p../wombat -B /usr/bin/my-nm
+
+ NM="../prev-binutils/new-nm -B../prev-gcc" now avoids a path search:
+ ../prev-binutils/my-nm -B../prev-gcc -B ../prev-binutils/my-nm
+
+ This seems to be all combinations, including those used by GCC bootstrap
+ (which, before this commit, fails to bootstrap when configured
+ --with-build-config=bootstrap-lto, because the lto plugin is now using
+ --export-symbols-regex, which requires libtool to find a working nm,
+ while also using -B../prev-gcc to point at the lto plugin associated
+ with the GCC just built.)
+
+ Regenerate all affected configure scripts.
+
+ * libtool.m4 (LT_PATH_NM): Handle user-specified NM with
+ options, including options containing paths.
+
+2022-03-25 Alan Modra <amodra@gmail.com>
+
+ Re: gas/Dwarf: improve debug info generation from .irp and alike blocks
+ am33_2.0-linux is a mn10300 target.
+
+ * testsuite/gas/elf/dwarf-5-irp.d: xfail am33.
+
+2022-03-25 GDB Administrator <gdbadmin@sourceware.org>
+
+ Automatic date update in version.in
+
+2022-03-24 Aaron Merey <amerey@redhat.com>
+
+ Remove download size from debuginfod progress messages if unavailable
+ Currently debuginfod progress update messages include the size of
+ each download:
+
+ Downloading 7.5 MB separate debug info for /lib/libxyz.so.0
+
+ This value originates from the Content-Length HTTP header of the
+ transfer. However this header is not guaranteed to be present for
+ each download. This can happen when debuginfod servers compress files
+ on-the-fly at the time of transfer. In this case gdb wrongly prints
+ "-0.00 MB" as the size.
+
+ This patch removes download sizes from progress messages when they are
+ not available. It also removes usage of the progress bar until
+ a more thorough reworking of progress updating is implemented. [1]
+
+ [1] https://sourceware.org/pipermail/gdb-patches/2022-February/185798.html
+
+2022-03-24 Reuben Thomas <rrt@sc3d.org>
+
+ sim: fix a comment typo in sim-load.c
+ Fix a typo where the documentation refers to a function parameter by the
+ wrong name.
+
+ Change-Id: I99494efe62cd4aa76fb78a0bd5da438d35740ebe
+
+2022-03-24 Reuben Thomas <rrt@sc3d.org>
+
+ sim: fix “alligned” typos
+ Change-Id: Ifd574e38524dd4f1cf0fc003e0c5c7499abc84a0
+
+2022-03-24 Jan Beulich <jbeulich@suse.com>
+
+ x86: mention dropped L1OM/K1OM support in ld/ as well
+ This amends e961c696dcb2 ("x86: drop L1OM/K1OM support from ld"). Also
+ remove the marker that I mistakenly added in c085ab00c7b2 ("x86: drop
+ L1OM/K1OM support from gas").
+
+2022-03-24 Simon Marchi <simon.marchi@efficios.com>
+
+ gdb/testsuite: remove gdb.python/pretty-print-call-by-hand.exp
+ This test was added without a corresponding fix, with some setup_kfails.
+ However, it results in UNRESOLVED results when GDB is built with ASan.
+
+ ERROR: GDB process no longer exists
+ GDB process exited with wait status 1946871 exp7 0 1
+ UNRESOLVED: gdb.python/pretty-print-call-by-hand.exp: frame print: backtrace test (PRMS gdb/28856)
+
+ Remove the test from the tree, I'll attach it to the Bugzilla bug
+ instead [1].
+
+ [1] https://sourceware.org/bugzilla/show_bug.cgi?id=28856
+
+ Change-Id: Id95d8949fb8742874bd12aeac758aa4d7564d678
+
+2022-03-24 Jan Beulich <jbeulich@suse.com>
+
+ x86: drop L1OM/K1OM support from ld
+ This was only rudimentary support anyway; none of the sub-architecture
+ specific insns were ever supported.
+
+ x86: drop L1OM special case from disassembler
+ There wasn't any real support anyway: None of the sub-architecture
+ specific insns were ever supported.
+
+2022-03-24 Jan Beulich <jbeulich@suse.com>
+
+ MAINTAINERS: add myself
+ I much appreciate Nick offering this role to me. Nevertheless there's
+ still a lot for me to learn here.
+
+ At this occasion also update my email address in the pre-existing, much
+ more narrow entry.
+
+2022-03-24 GDB Administrator <gdbadmin@sourceware.org>
+
+ Automatic date update in version.in
+
+2022-03-23 Andrew Burgess <aburgess@redhat.com>
+
+ gdb/testsuite: address test failures in gdb.mi/mi-multi-commands.exp
+ The gdb.mi/mi-multi-commands.exp test was added in commit:
+
+ commit d08cbc5d3203118da5583296e49273cf82378042
+ Date: Wed Dec 22 12:57:44 2021 +0000
+
+ gdb: unbuffer all input streams when not using readline
+
+ And then tweaked in commit:
+
+ commit 144459531dd68a1287905079aaa131b777a8cc82
+ Date: Mon Feb 7 20:35:58 2022 +0000
+
+ gdb/testsuite: relax pattern in new gdb.mi/mi-multi-commands.exp test
+
+ The second of these commits was intended to address periodic test
+ failures that I was seeing, and this change did fix some problems,
+ but, unfortunately, introduced other issues.
+
+ The problem is that the test relies on sending two commands to GDB in
+ a single write. As the characters that make these two commands arrive
+ they are echoed to GDB's console. However, there is a race between
+ how quickly the characters are echoed and how quickly GDB decides to
+ act on the incoming commands.
+
+ Usually, both commands are echoed in full before GDB acts on the first
+ command, but sometimes this is not the case, and GDB can execute the
+ first command before both commands are fully echoed to the console.
+ In this case, the output of the first command will be mixed in with
+ the echoing of the second command.
+
+ This mixing of the command echoing and the first command output is
+ what was causing failures in the original version of the test.
+
+ The second commit relaxed the expected output pattern a little, but
+ was still susceptible to failures, so this commit further relaxes the
+ pattern.
+
+ Now, we look for the first command output with no regard to what is
+ before, or after the command. Then we look for the first mi prompt to
+ indicate that the first command has completed.
+
+ I believe that this change should make the test more stable than it
+ was before.
+
+2022-03-23 Nick Alcock <nick.alcock@oracle.com>
+
+ libctf: add LIBCTF_WRITE_FOREIGN_ENDIAN debugging option
+ libctf has always handled endianness differences by detecting
+ foreign-endian CTF dicts on the input and endian-flipping them: dicts
+ are always written in native endianness. This makes endian-awareness
+ very low overhead, but it means that the foreign-endian code paths
+ almost never get routinely tested, since "make check" usually reads in
+ dicts ld has just written out: only a few corrupted-CTF tests are
+ actually in fixed endianness, and even they only test the foreign-
+ endian code paths when you run make check on a big-endian machine.
+ (And the fix is surely not to add more .s-based tests like that, because
+ they are a nightmare to maintain compared to the C-code-based ones.)
+
+ To improve on this, add a new environment variable,
+ LIBCTF_WRITE_FOREIGN_ENDIAN, which causes libctf to unconditionally
+ endian-flip at ctf_write time, so the output is always in the wrong
+ endianness. This then tests the foreign-endian read paths properly
+ at open time.
+
+ Make this easier by restructuring the writeout code in ctf-serialize.c,
+ which duplicates the maybe-gzip-and-write-out code three times (once
+ for ctf_write_mem, with thresholding, and once each for
+ ctf_compress_write and ctf_write just so those can avoid thresholding
+ and/or compression). Instead, have the latter two call the former
+ with thresholds of 0 or (size_t) -1, respectively.
+
+ The endian-flipping code itself gains a bit of complexity, because
+ one single endian-flipper (flip_types) was assuming the input to be
+ in foreign-endian form and assuming it could pull things out of the
+ input once they had been flipped and make sense of them. At the
+ cost of a few lines of duplicated initializations, teach it to
+ read before flipping if we're flipping to foreign-endianness instead
+ of away from it.
+
+ libctf/
+ * ctf-impl.h (ctf_flip_header): No longer static.
+ (ctf_flip): Likewise.
+ * ctf-open.c (flip_header): Rename to...
+ (ctf_flip_header): ... this, now it is not private to one file.
+ (flip_ctf): Rename...
+ (ctf_flip): ... this too. Add FOREIGN_ENDIAN arg.
+ (flip_types): Likewise. Use it.
+ (ctf_bufopen_internal): Adjust calls.
+ * ctf-serialize.c (ctf_write_mem): Add flip_endian path via
+ a newly-allocated bounce buffer.
+ (ctf_compress_write): Move below ctf_write_mem and reimplement
+ in terms of it.
+ (ctf_write): Likewise.
+ (ctf_gzwrite): Note that this obscure writeout function does not
+ support endian-flipping.
+
+2022-03-23 Nick Alcock <nick.alcock@oracle.com>
+
+ libctf, ld: diagnose corrupted CTF header cth_strlen
+ The last section in a CTF dict is the string table, at an offset
+ represented by the cth_stroff header field. Its length is recorded in
+ the next field, cth_strlen, and the two added together are taken as the
+ size of the CTF dict. Upon opening a dict, we check that none of the
+ header offsets exceed this size, and we check when uncompressing a
+ compressed dict that the result of the uncompression is the same length:
+ but CTF dicts need not be compressed, and short ones are not.
+ Uncompressed dicts just use the ctf_size without checking it. This
+ field is thankfully almost unused: it is mostly used when reserializing
+ a dict, which can't be done to dicts read off disk since they're
+ read-only.
+
+ However, when opening an uncompressed foreign-endian dict we have to
+ copy it out of the mmaped region it is stored in so we can endian-
+ swap it, and we use ctf_size when doing that. When the cth_strlen is
+ corrupt, this can overrun.
+
+ Fix this by checking the ctf_size in all uncompressed cases, just as we
+ already do in the compressed case. Add a new test.
+
+ This came to light because various corrupted-CTF raw-asm tests had an
+ incorrect cth_strlen: fix all of them so they produce the expected
+ error again.
+
+ libctf/
+ PR libctf/28933
+ * ctf-open.c (ctf_bufopen_internal): Always check uncompressed
+ CTF dict sizes against the section size in case the cth_strlen is
+ corrupt.
+
+ ld/
+ PR libctf/28933
+ * testsuite/ld-ctf/diag-strlen-invalid.*: New test,
+ derived from diag-cttname-invalid.s.
+ * testsuite/ld-ctf/diag-cttname-invalid.s: Fix incorrect cth_strlen.
+ * testsuite/ld-ctf/diag-cttname-null.s: Likewise.
+ * testsuite/ld-ctf/diag-cuname.s: Likewise.
+ * testsuite/ld-ctf/diag-parlabel.s: Likewise.
+ * testsuite/ld-ctf/diag-parname.s: Likewise.
+
+2022-03-23 Nick Alcock <nick.alcock@oracle.com>
+
+ include, libctf, ld: extend variable section to contain functions too
+ The CTF variable section is an optional (usually-not-present) section in
+ the CTF dict which contains name -> type mappings corresponding to data
+ symbols that are present in the linker input but not in the output
+ symbol table: the idea is that programs that use their own symbol-
+ resolution mechanisms can use this section to look up the types of
+ symbols they have found using their own mechanism.
+
+ Because these removed symbols (mostly static variables, functions, etc)
+ all have names that are unlikely to appear in the ELF symtab and because
+ very few programs have their own symbol-resolution mechanisms, a special
+ linker flag (--ctf-variables) is needed to emit this section.
+
+ Historically, we emitted only removed data symbols into the variable
+ section. This seemed to make sense at the time, but in hindsight it
+ really doesn't: functions are symbols too, and a C program can look them
+ up just like any other type. So extend the variable section so that it
+ contains all static function symbols too (if it is emitted at all), with
+ types of kind CTF_K_FUNCTION.
+
+ This is a little fiddly. We relied on compiler assistance for data
+ symbols: the compiler simply emits all data symbols twice, once into the
+ symtypetab as an indexed symbol and once into the variable section.
+
+ Rather than wait for a suitably adjusted compiler that does the same for
+ function symbols, we can pluck unreported function symbols out of the
+ symtab and add them to the variable section ourselves. While we're at
+ it, we do the same with data symbols: this is redundant right now
+ because the compiler does it, but it costs very little time and lets the
+ compiler drop this kludge and save a little space in .o files.
+
+ include/
+ * ctf.h: Mention the new things we can see in the variable
+ section.
+
+ ld/
+ * testsuite/ld-ctf/data-func-conflicted-vars.d: New test.
+
+ libctf/
+ * ctf-link.c (ctf_link_deduplicating_variables): Duplicate
+ symbols into the variable section too.
+ * ctf-serialize.c (symtypetab_delete_nonstatic_vars): Rename
+ to...
+ (symtypetab_delete_nonstatics): ... this. Check the funchash
+ when pruning redundant variables.
+ (ctf_symtypetab_sect_sizes): Adjust accordingly.
+ * NEWS: Describe this change.
+
+2022-03-23 Nick Alcock <nick.alcock@oracle.com>
+
+ ld, testsuite: improve CTF-availability test
+ The test for -gctf support in the compiler is used to determine when to
+ run the ld-ctf tests and most of those in libctf. Unfortunately,
+ because it uses check_compiler_available and compile_one_cc, it will
+ fail whenever the compiler emits anything on stderr, even if it
+ actually does support CTF perfectly well.
+
+ So, instead, ask the compiler to emit assembler output and grep it for
+ references to ".ctf": this is highly unlikely to be present if the
+ compiler does not support CTF. (This will need adjusting when CTF grows
+ support for non-ELF platforms that don't dot-prepend their section
+ names, but right now the linker doesn't link CTF on any such platforms
+ in any case.)
+
+ With this in place we can do things like run all the libctf tests under
+ leak sanitizers etc even if those spray warnings on simple CTF
+ compilations, rather than being blocked from doing so just when we would
+ most like to.
+
+ ld/
+ * testsuite/lib/ld-lib.exp (check_ctf_available): detect CTF
+ even if a CTF-capable compiler emits warnings.
+
+2022-03-23 Simon Marchi <simon.marchi@efficios.com>
+
+ gdb/python: remove Python 2/3 compatibility macros
+ New in this version:
+
+ - Rebase on master, fix a few more issues that appeared.
+
+ python-internal.h contains a number of macros that helped make the code
+ work with both Python 2 and 3. Remove them and adjust the code to use
+ the Python 3 functions.
+
+ Change-Id: I99a3d80067fb2d65de4f69f6473ba6ffd16efb2d
+
+2022-03-23 Simon Marchi <simon.marchi@polymtl.ca>
+
+ gdb/python: remove Python 2 support
+ New in this version:
+
+ - Add a PY_MAJOR_VERSION check in configure.ac / AC_TRY_LIBPYTHON. If
+ the user passes --with-python=python2, this will cause a configure
+ failure saying that GDB only supports Python 3.
+
+ Support for Python 2 is a maintenance burden for any patches touching
+ Python support. Among others, the differences between Python 2 and 3
+ string and integer types are subtle. It requires a lot of effort and
+ thinking to get something that behaves correctly on both. And that's if
+ the author and reviewer of the patch even remember to test with Python
+ 2.
+
+ See this thread for an example:
+
+ https://sourceware.org/pipermail/gdb-patches/2021-December/184260.html
+
+ So, remove Python 2 support. Update the documentation to state that GDB
+ can be built against Python 3 (as opposed to Python 2 or 3).
+
+ Update all the spots that use:
+
+ - sys.version_info
+ - IS_PY3K
+ - PY_MAJOR_VERSION
+ - gdb_py_is_py3k
+
+ ... to only keep the Python 3 portions and drop the use of some
+ now-removed compatibility macros.
+
+ I did not update the configure script more than just removing the
+ explicit references to Python 2. We could maybe do more there, like
+ check the Python version and reject it if that version is not
+ supported. Otherwise (with this patch), things will only fail at
+ compile time, so it won't really be clear to the user that they are
+ trying to use an unsupported Python version. But I'm a bit lost in the
+ configure code that checks for Python, so I kept that for later.
+
+ Change-Id: I75b0f79c148afbe3c07ac664cfa9cade052c0c62
+
+2022-03-23 Jan Beulich <jbeulich@suse.com>
+
+ x86: reject relocations involving registers
+ To prevent fatal or even internal errors, add a simple check to
+ i386_validate_fix(), rejecting relocations when their target symbol is
+ an equate of a register (or resolved to reg_section for any other
+ reason).
+
+ x86: improve resolution of register equates
+ Allow transitive (or recursive) equates to work in addition to direct
+ ones. The only requirements are that
+ - the equate being straight of a register, i.e. no expressions involved
+ (albeit I'm afraid something like "%eax + 0" will be viewed as %eax),
+ - at the point of use there's no forward ref left which cannot be
+ resolved, yet.
+
+ Revert "PR28977 tc-i386.c internal error in parse_register"
+ This reverts commit 5fac3f02edacfca458f7eeaaaa33a87e26e0e332,
+ which was superceeded / replaced by 4faaa10f3fab.
+
+2022-03-23 Jan Beulich <jbeulich@suse.com>
+
+ x86: don't attempt to resolve equates and alike from i386_parse_name()
+ PR gas/28977
+
+ Perhaps right from its introduction in 4d1bb7955a8b it was wrong for
+ i386_parse_name() to call parse_register(). This being a hook from the
+ expression parser, it shouldn't be resolving e.g. equated symbols.
+ That's relevant only for all other callers of parse_register().
+
+ To compensate, in Intel syntax mode check_register() needs calling;
+ perhaps not doing so was an oversight right when the function was
+ introduced. This is necessary in particular to force EVEX encoding when
+ VRex registers are used (but of course also to reject bad uses of
+ registers, i.e. fully matching what parse_register() needs it for).
+
+2022-03-23 Luis Machado <luis.machado@arm.com>
+
+ Update the list of recognized m-profile TAG_CPU_ARCH_*
+ Check 3 additional variants previously not recognized:
+
+ - TAG_CPU_ARCH_V7E_M
+ - TAG_CPU_ARCH_V8M_BASE
+ - TAG_CPU_ARCH_V8M_MAIN
+
+2022-03-23 Jan Beulich <jbeulich@suse.com>
+
+ gas/Dwarf5: re-use file 0 line string table entry when faking file 0
+ No need to emit the same string a 2nd time for file 1 in this case.
+
+ gas/Dwarf5: adjust .debug_line file 0 checking
+ First of all when a table entry has a NULL filename, the two inner if()s
+ are better done the other way around: The 2nd doesn't depend on what the
+ first does. This then renders redundant half of the conditions of the
+ other if() and clarifies that subsequently only entry 0 is dealt with
+ (indicating that part of the comment was wrong). Finally for there to be
+ a usable name in slot 1, files_in_use needs to be larger than 1 and slot
+ 1's (rather than slot 0's) name needs to be non-NULL.
+
+2022-03-23 Jan Beulich <jbeulich@suse.com>
+
+ gas/Dwarf5: drop dead code
+ Commit 3417bfca676f ("GAS: DWARF-5: Ensure that the 0'th entry in the
+ directory table contains the current... ") added a "dwarf_level < 5"
+ check to out_dir_and_file_list(). This rendered dead that branch of the
+ construct, due to the enclosing if()'s "DWARF2_LINE_VERSION >= 5".
+ Delete that code as well as the corresponding part of the comment.
+
+ While there also drop a redundant "dirs != NULL": "dirs" will always be
+ non-NULL when dirs_in_use is not zero.
+
+2022-03-23 Jan Beulich <jbeulich@suse.com>
+
+ gas/Dwarf: improve debug info generation from .irp and alike blocks
+ Tying the bumping of the logical line number to reading from the
+ original source file looks wrong: Upon finishing of the processing of an
+ sb the original values will be restored anyway. Yet without bumping the
+ line counter uses of .line inside e.g. an .irp construct won't have the
+ intended effect: Such uses may be necessary to ensure proper debug info
+ is emitted in particular when switching sections inside the .irp body,
+ as dwarf2_gen_line_info() would bail without doing anything when it
+ finds the line number unchanged from what it saw last.
+
+2022-03-23 Jan Beulich <jbeulich@suse.com>
+
+ ELF32: don't silently truncate relocation addends
+ At least x86-64's x32 sub-mode and RISC-V's 32-bit mode calculate
+ addends as 64-bit values, but store them in signed 32-bit fields when
+ generating the file without encountering any earlier error. When the
+ relocated field is a 64-bit one, the value resulting after processing
+ the relocation record when linking (or the latest when loading) may
+ thus be wrong due to the truncation.
+
+ With the code change in place, one x32 testcase actually triggers the
+ new diagnostic. That one case of too large a (negative) addend is being
+ adjusted alongside the addition of a new testcase to actually trigger
+ the new error. (Note that due to internal BFD behavior the relocation in
+ .data doesn't get processed anymore after the errors in .text.)
+
+ Note that in principle it is possible to express 64-bit relocations in
+ ELF32, but this would require .rel relocations, i.e. with the addend
+ stored in the 64-bit field being relocated. But I guess it would be a
+ lot of effort for little gain to actually support this.
+
+2022-03-23 Jan Beulich <jbeulich@suse.com>
+
+ gas: retain whitespace between strings
+ Macro arguments may be separated by commas or just whitespace. Macro
+ arguments may also be quoted (where one level of quotes is removed in
+ the course of determining the values for the respective formal
+ parameters). Furthermore this quote removal knows _two_ somewhat odd
+ escaping mechanisms: One, apparently in existence forever, is that a
+ pair of quotes counts as the escaping of a quote, with the pair being
+ transformed to a single quote in the course of quote removal. The other
+ (introduced by c06ae4f232e6) looks more usual on the surface in that it
+ deals with \" sequences, but it _retains_ the escaping \. Hence only the
+ former mechanism is suitable when the value to be used by the macro body
+ is to contain a quote. Yet this results in ambiguity of what "a""b" is
+ intended to mean; elsewhere (e.g. for .ascii) it represents two
+ successive string literals. However, in any event is the above different
+ from "a" "b": I don't think this can be viewed the same as "a""b" when
+ processing macro arguments.
+
+ Change the scrubber to retain such whitespace, by making the processing
+ of strings more similar to that of symbols. And indeed this appears to
+ make sense when taking into account that for quite a while gas has been
+ supporting quoted symbol names.
+
+ Taking a more general view, however, the change doesn't go quite far
+ enough. There are further cases where significant whitespace is removed
+ by the scrubber. The new testcase enumerates a few in its ".if 0"
+ section. I'm afraid the only way that I see to deal with this would be
+ to significantly simplify the scrubber, such that it wouldn't do much
+ more than collapse sequences of unquoted whitespace into a single blank.
+ To be honest problems in this area aren't really surprising when seeing
+ that there's hardly any checking of .macro use throughout the testsuite
+ (and in particular in the [relatively] generic tests under all/).
+
+2022-03-23 Vladimir Mezentsev <vladimir.mezentsev@oracle.com>
+
+ Only .so files are used in libcollector. Remove the other files.
+ * libcollector/Makefile.am (install-data-local): Remove the *.la
+ and *.a libraries.
+ * libcollector/Makefile.in: Regenerate.
+
+2022-03-23 Tiezhu Yang <yangtiezhu@loongson.cn>
+
+ gdb: testsuite: use gdb_attach to fix jit-elf.exp
+ If /proc/sys/kernel/yama/ptrace_scope is 1, when execute the following
+ command without superuser:
+
+ make check-gdb TESTS="gdb.base/jit-elf.exp"
+
+ we can see the following messages in gdb/testsuite/gdb.log:
+
+ (gdb) attach 1650108
+ Attaching to program: /home/yangtiezhu/build/gdb/testsuite/outputs/gdb.base/jit-elf/jit-elf-main, process 1650108
+ ptrace: Operation not permitted.
+ (gdb) FAIL: gdb.base/jit-elf.exp: attach: one_jit_test-2: break here 1: attach
+
+ use gdb_attach to fix the above issue, at the same time, the clean_reattach
+ proc should return a value to indicate whether it worked, and the callers
+ should return early as well on failure.
+
+2022-03-23 Tiezhu Yang <yangtiezhu@loongson.cn>
+
+ gdb: testsuite: use gdb_attach to fix attach-pie-noexec.exp
+ If /proc/sys/kernel/yama/ptrace_scope is 1, when execute the following
+ command without superuser:
+
+ make check-gdb TESTS="gdb.base/attach-pie-noexec.exp"
+
+ we can see the following messages in gdb/testsuite/gdb.log:
+
+ (gdb) attach 6500
+ Attaching to process 6500
+ ptrace: Operation not permitted.
+ (gdb) PASS: gdb.base/attach-pie-noexec.exp: attach
+
+ It is obviously wrong, the expected result should be UNSUPPORTED in such
+ a case.
+
+ With this patch, we can see "Operation not permitted" in the log info,
+ and then we can do the following processes to test:
+ (1) set ptrace_scope as 0
+ $ echo 0 | sudo tee /proc/sys/kernel/yama/ptrace_scope
+ $ make check-gdb TESTS="gdb.base/attach-pie-noexec.exp"
+ (2) use sudo
+ $ sudo make check-gdb TESTS="gdb.base/attach-pie-noexec.exp"
+
+2022-03-23 Tiezhu Yang <yangtiezhu@loongson.cn>
+
+ gdb: testsuite: add new gdb_attach to check "attach" command
+ This commit adds new gdb_attach to centralize the failure checking of
+ "attach" command. Return 0 if attach failed, otherwise return 1.
+
+2022-03-23 Tiezhu Yang <yangtiezhu@loongson.cn>
+
+ gdb: testsuite: remove attach test from can_spawn_for_attach
+ As Pedro Alves said, caching procs should not issue pass/fail [1],
+ this commit removes attach test from can_spawn_for_attach, at the
+ same time, use "verbose -log" instead of "unsupported" to get a
+ trace about why a test run doesn't support spawning for attach.
+
+ [1] https://sourceware.org/pipermail/gdb-patches/2022-March/186311.html
+
+2022-03-23 GDB Administrator <gdbadmin@sourceware.org>
+
+ Automatic date update in version.in
+
+2022-03-22 John Baldwin <jhb@FreeBSD.org>
+
+ Add support for hardware breakpoints/watchpoints on FreeBSD/Aarch64.
+ This shares aarch64-nat.c and nat/aarch64-hw-point.c with the Linux
+ native target. Since FreeBSD writes all of the debug registers in one
+ ptrace op, use an unordered_set<> to track the "dirty" state for
+ threads rather than bitmasks of modified registers.
+
+ fbsd-nat: Add a low_prepare_to_resume virtual method.
+ This method can be overridden by architecture-specific targets to
+ perform additional work before a thread is resumed.
+
+2022-03-22 John Baldwin <jhb@FreeBSD.org>
+
+ fbsd-nat: Add a low_delete_thread virtual method.
+ This method can be overridden by architecture-specific targets to
+ perform additional work when a thread is deleted.
+
+ Note that this method is only invoked on systems supporting LWP
+ events, but the pending use case (aarch64 debug registers) is not
+ supported on older kernels that do not support LWP events.
+
+2022-03-22 John Baldwin <jhb@FreeBSD.org>
+
+ fbsd-nat: Add helper routine to fetch siginfo_t for a ptid.
+
+2022-03-22 John Baldwin <jhb@FreeBSD.org>
+
+ aarch64: Add an aarch64_nat_target mixin class.
+ This class includes platform-independent target methods for hardware
+ breakpoints and watchpoints using routines from
+ nat/aarch64-hw-point.c.
+
+ stopped_data_address is not platform-independent since the FAR
+ register holding the address for a breakpoint hit must be fetched in a
+ platform-specific manner. However, aarch64_stopped_data_address is
+ provided as a helper routine which performs platform-independent
+ validation given the value of the FAR register.
+
+ For tracking the per-process debug register mirror state, use an
+ unordered_map indexed by pid as recently adopted in x86-nat.c rather
+ than a manual linked-list.
+
+2022-03-22 John Baldwin <jhb@FreeBSD.org>
+
+ nat: Split out platform-independent aarch64 debug register support.
+ Move non-Linux-specific support for hardware break/watchpoints from
+ nat/aarch64-linux-hw-point.c to nat/aarch64-hw-point.c. Changes
+ beyond a simple split of the code are:
+
+ - aarch64_linux_region_ok_for_watchpoint and
+ aarch64_linux_any_set_debug_regs_state renamed to drop linux_ as
+ they are not platform specific.
+
+ - Platforms must implement the aarch64_notify_debug_reg_change
+ function which is invoked from the platform-independent code when a
+ debug register changes for a given debug register state. This does
+ not use the indirection of a 'low' structure as is done for x86.
+
+ - The handling for kernel_supports_any_contiguous_range is not
+ pristine. For non-Linux it is simply defined to true. Some uses of
+ this could perhaps be implemented as new 'low' routines for the
+ various places that check it instead?
+
+ - Pass down ptid into aarch64_handle_breakpoint and
+ aarch64_handle_watchpoint rather than using current_lwp_ptid which
+ is only defined on Linux. In addition, pass the ptid on to
+ aarch64_notify_debug_reg_change instead of the unused state
+ argument.
+
+2022-03-22 John Baldwin <jhb@FreeBSD.org>
+
+ x86-fbsd-nat: Copy debug register state on fork.
+ Use the FreeBSD native target low_new_fork hook to copy the
+ per-process debug state from the parent to the child on fork.
+
+ fbsd-nat: Add a low_new_fork virtual method.
+ This method can be overridden by architecture-specific targets to
+ perform additional work when a new child process is forked.
+
+2022-03-22 John Baldwin <jhb@FreeBSD.org>
+
+ Add an x86_fbsd_nat_target mixin class for FreeBSD x86 native targets.
+ This class implements debug register support common between the i386
+ and amd64 native targets.
+
+ While here, remove #ifdef's for HAVE_PT_GETDBREGS in FreeBSD-specific
+ code. The ptrace request has been present on FreeBSD x86
+ architectures since 4.0 (released in March 2000). The last FreeBSD
+ release without this support is 3.5 released in June 2000.
+
+2022-03-22 John Baldwin <jhb@FreeBSD.org>
+
+ x86-nat: Add x86_lookup_debug_reg_state.
+ This function returns nullptr if debug register state does not yet
+ exist for a given process rather than creating new state.
+
+ x86-nat: Use an unordered_map to store per-pid debug reg state.
+ This replaces a manual linked list which used O(n) lookup and removal.
+
+ Remove USE_SIGTRAP_SIGINFO condition for FreeBSD/x86 debug regs support.
+ For BSD x86 targets, stopped_by_hw_breakpoint doesn't check siginfo_t
+ but inspects the DR6 register directly via PT_GETDBREGS.
+
+2022-03-22 Tom Tromey <tom@tromey.com>
+
+ Remove two unused variables
+ I found a couple of spots that declare a symtab_and_line but don't
+ actually use it. I think this probably isn't detected as unused
+ because it has a constructor.
+
+2022-03-22 Steiner H Gunderson <steinar+sourceware@gunderson.no>
+
+ Fix return code in _bfd_dwarf2_find_nearest_line().
+ * dwarf2.c (_bfd_dwarf2_find_nearest_line): if a function name is
+ found, but no line number info, then return a result of 2.
+
+2022-03-22 Andrew Burgess <andrew.burgess@embecosm.com>
+
+ gdb/python: add gdb.format_address function
+ Add a new function, gdb.format_address, which is a wrapper around
+ GDB's print_address function.
+
+ This method takes an address, and returns a string with the format:
+
+ ADDRESS <SYMBOL+OFFSET>
+
+ Where, ADDRESS is the original address, formatted as hexadecimal,
+ SYMBOL is a symbol with an address lower than ADDRESS, and OFFSET is
+ the offset from SYMBOL to ADDRESS in decimal.
+
+ If there's no SYMBOL suitably close to ADDRESS then the
+ <SYMBOL+OFFSET> part is not included.
+
+ This is useful if a user wants to write a Python script that
+ pretty-prints addresses, the user no longer needs to do manual symbol
+ lookup, or worry about correctly formatting addresses.
+
+ Additionally, there are some settings that effect how GDB picks
+ SYMBOL, and whether the file name and line number should be included
+ with the SYMBOL name, the gdb.format_address function ensures that the
+ users Python script also benefits from these settings.
+
+ The gdb.format_address by default selects SYMBOL from the current
+ inferiors program space, and address is formatted using the
+ architecture for the current inferior. However, a user can also
+ explicitly pass a program space and architecture like this:
+
+ gdb.format_address(ADDRESS, PROGRAM_SPACE, ARCHITECTURE)
+
+ In order to format an address for a different inferior.
+
+ Notes on the implementation:
+
+ In py-arch.c I extended arch_object_to_gdbarch to add an assertion for
+ the type of the PyObject being worked on. Prior to this commit all
+ uses of arch_object_to_gdbarch were guaranteed to pass this function a
+ gdb.Architecture object, but, with this commit, this might not be the
+ case.
+
+ So, with this commit I've made it a requirement that the PyObject be a
+ gdb.Architecture, and this is checked with the assert. And in order
+ that callers from other files can check if they have a
+ gdb.Architecture object, I've added the new function
+ gdbpy_is_architecture.
+
+ In py-progspace.c I've added two new function, the first
+ progspace_object_to_program_space, converts a PyObject of type
+ gdb.Progspace to the associated program_space pointer, and
+ gdbpy_is_progspace checks if a PyObject is a gdb.Progspace or not.
+
+2022-03-22 Luis Machado <luis.machado@arm.com>
+
+ Fix some stale header names from dwarf files
+ Some of these references were not updated when they were moved to a separate
+ directory.
+
+2022-03-22 Vladimir Mezentsev <vladimir.mezentsev@oracle.com>
+
+ Install gprofng libraries under $(pkglibdir)
+ gprofng/ChangeLog
+ 2022-03-21 Vladimir Mezentsev <vladimir.mezentsev@oracle.com>
+
+ PR gprofng/28972
+ * gprofng/libcollector/Makefile.am: Rename lib_LTLIBRARIES to
+ pkglib_LTLIBRARIES. Add install-data-local.
+ * gprofng/src/Makefile.am: Likewise.
+ * gprofng/src/envsets.cc (putenv_libcollector_ld_misc): New location of
+ the gprofng libraries.
+ * gprofng/configure.ac: Removed an unused GPROFNG_LIBDIR.
+ * gprofng/Makefile.am: Removed an unused GPROFNG_LIBDIR. Add
+ install-data-local.
+ * gprofng/configure: Regenerate.
+ * gprofng/Makefile.in: Likewise.
+ * gprofng/doc/Makefile.in: Likewise.
+ * gprofng/gp-display-htmllibcollector/Makefile.in: Likewise.
+ * gprofng/libcollector/Makefile.in: Likewise.
+ * gprofng/src/Makefile.in: Likewise.
+
+2022-03-22 GDB Administrator <gdbadmin@sourceware.org>
+
+ Automatic date update in version.in
+
+2022-03-21 Roland McGrath <mcgrathr@google.com>
+
+ gdb: Add missing #include in solib.h
+ The gdb_bfd_ref_ptr type is used in solib.h declarations.
+
+2022-03-21 Aaron Merey <amerey@redhat.com>
+
+ PR gdb/27570: missing support for debuginfod in core_target::build_file_mappings
+ Add debuginfod support to core_target::build_file_mappings and
+ locate_exec_from_corefile_build_id to enable the downloading of
+ missing executables and shared libraries referenced in core files.
+
+ Also add debuginfod support to solib_map_sections so that previously
+ downloaded shared libraries can be retrieved from the local debuginfod
+ cache.
+
+ When core file shared libraries are found locally, verify that their
+ build-ids match the corresponding build-ids found in the core file.
+ If there is a mismatch, attempt to query debuginfod for the correct
+ build and print a warning if unsuccessful:
+
+ warning: Build-id of /lib64/libc.so.6 does not match core file.
+
+ Also disable debuginfod when gcore invokes gdb. Debuginfo is not
+ needed for core file generation so debuginfod queries will slow down
+ gcore unnecessarily.
+
+2022-03-21 Aaron Merey <amerey@redhat.com>
+
+ gdb: Add soname to build-id mapping for core files
+ Since commit aa2d5a422 gdb has been able to read executable and shared
+ library build-ids within core files.
+
+ Expand this functionality so that each core file bfd maintains a map of
+ soname to build-id for each shared library referenced in the core file.
+
+ This feature may be used to verify that gdb has found the correct shared
+ libraries for core files and to facilitate downloading shared libaries via
+ debuginfod.
+
+2022-03-21 Pedro Alves <pedro@palves.net>
+
+ Watchpoint followed by catchpoint misreports watchpoint (PR gdb/28621)
+ If GDB reports a watchpoint hit, and then the next event is not
+ TARGET_WAITKIND_STOPPED, but instead some event for which there's a
+ catchpoint, such that GDB calls bpstat_stop_status, GDB mistakenly
+ thinks the watchpoint triggered. Vis, using foll-fork.c:
+
+ (gdb) awatch v
+ Hardware access (read/write) watchpoint 2: v
+ (gdb) catch fork
+ Catchpoint 3 (fork)
+ (gdb) c
+ Continuing.
+
+ Hardware access (read/write) watchpoint 2: v
+
+ Old value = 0
+ New value = 5
+ main () at gdb.base/foll-fork.c:16
+ 16 pid = fork ();
+ (gdb)
+ Continuing.
+
+ Hardware access (read/write) watchpoint 2: v <<<<
+ <<<< these lines are spurious
+ Value = 5 <<<<
+
+ Catchpoint 3 (forked process 1712369), arch_fork (ctid=0x7ffff7fa4810) at arch-fork.h:49
+ 49 arch-fork.h: No such file or directory.
+ (gdb)
+
+ The problem is that when we handle the fork event, nothing called
+ watchpoints_triggered before calling bpstat_stop_status. Thus, each
+ watchpoint's watchpoint_triggered field was still set to
+ watch_triggered_yes from the previous (real) watchpoint stop.
+ watchpoint_triggered is only current called in the handle_signal_stop
+ path, when handling TARGET_WAITKIND_STOPPED.
+
+ This fixes it by adding watchpoint_triggered calls in the other events
+ paths that call bpstat_stop_status. But instead of adding them
+ explicitly, it adds a new function bpstat_stop_status_nowatch that
+ wraps bpstat_stop_status and calls watchpoint_triggered, and then
+ replaces most calls to bpstat_stop_status with calls to
+ bpstat_stop_status_nowatch.
+
+ This required constifying watchpoints_triggered.
+
+ New test included, which fails without the fix.
+
+ Bug: https://sourceware.org/bugzilla/show_bug.cgi?id=28621
+
+ Change-Id: I282b38c2eee428d25319af3bc842f9feafed461c
+
+2022-03-21 Pedro Alves <pedro@palves.net>
+
+ gdbserver: Fixup previous patch
+ The previous prepare_resume_reply change missed updating the 'buf'
+ reference that overwrites the 'T', so if 'buf' was advanced, we'd
+ still overwrite the wrong character. This fixes it.
+
+ Change-Id: Ia8ce433366b85af4e268c1c49e7b447da3130a4d
+
+2022-03-21 Pedro Alves <pedro@palves.net>
+
+ gdbserver: Fix incorrect assertion
+ While playing with adding a new event kind, I noticed that
+ prepare_resume_reply TARGET_WAITKIND_FORKED, etc. advance 'buf', so if
+ we force-disable the T packet, we'd fail the *buf == 'T' assertion.
+
+ Fix it by tweaking the assertion to always look at the beginning of
+ the buffer.
+
+ Change-Id: I8c38e32353db115edcde418b3b1e8ba12343c22b
+
+2022-03-21 Simon Marchi <simon.marchi@efficios.com>
+
+ gdb: re-generate config.in
+ I'm getting this diff when running `autoreconf -vf`.
+
+ Change-Id: Id5f009d0f0481935c1ee9df5332cb4bf45fbd32d
+
+2022-03-21 Andrew Burgess <aburgess@redhat.com>
+
+ gdb/x86: handle stap probe arguments in xmm registers
+ On x86 machines with xmm register, and with recent versions of
+ systemtap (and gcc?), it can occur that stap probe arguments will be
+ placed into xmm registers.
+
+ I notice this happening on a current Fedora Rawhide install with the
+ following package versions installed:
+
+ $ rpm -q glibc systemtap gcc
+ glibc-2.35.9000-10.fc37.x86_64
+ systemtap-4.7~pre16468670g9f253544-1.fc37.x86_64
+ gcc-12.0.1-0.12.fc37.x86_64
+
+ If I check the probe data in libc, I see this:
+
+ $ readelf -n /lib64/libc.so.6
+ ...
+ stapsdt 0x0000004d NT_STAPSDT (SystemTap probe descriptors)
+ Provider: libc
+ Name: pthread_start
+ Location: 0x0000000000090ac3, Base: 0x00000000001c65c4, Semaphore: 0x0000000000000000
+ Arguments: 8@%xmm1 8@1600(%rbx) 8@1608(%rbx)
+ stapsdt 0x00000050 NT_STAPSDT (SystemTap probe descriptors)
+ Provider: libc
+ Name: pthread_create
+ Location: 0x00000000000912f1, Base: 0x00000000001c65c4, Semaphore: 0x0000000000000000
+ Arguments: 8@%xmm1 8@%r13 8@8(%rsp) 8@16(%rsp)
+ ...
+
+ Notice that for both of these probes, the first argument is a uint64_t
+ stored in the xmm1 register.
+
+ Unfortunately, if I try to use this probe within GDB, then I can't
+ view the first argument. Here's an example session:
+
+ $ gdb $(which gdb)
+ (gdb) start
+ ...
+ (gdb) info probes stap libc pthread_create
+ ...
+ (gdb) break *0x00007ffff729e2f1 # Use address of probe.
+ (gdb) continue
+ ...
+ (gdb) p $_probe_arg0
+ Invalid cast.
+
+ What's going wrong? If I re-run my session, but this time use 'set
+ debug stap-expression 1', this is what I see:
+
+ (gdb) set debug stap-expression 1
+ (gdb) p $_probe_arg0
+ Operation: UNOP_CAST
+ Operation: OP_REGISTER
+ String: xmm1
+ Type: uint64_t
+ Operation: UNOP_CAST
+ Operation: OP_REGISTER
+ String: r13
+ Type: uint64_t
+ Operation: UNOP_CAST
+ Operation: UNOP_IND
+ Operation: UNOP_CAST
+ Operation: BINOP_ADD
+ Operation: OP_LONG
+ Type: long
+ Constant: 0x0000000000000008
+ Operation: OP_REGISTER
+ String: rsp
+ Type: uint64_t *
+ Type: uint64_t
+ Operation: UNOP_CAST
+ Operation: UNOP_IND
+ Operation: UNOP_CAST
+ Operation: BINOP_ADD
+ Operation: OP_LONG
+ Type: long
+ Constant: 0x0000000000000010
+ Operation: OP_REGISTER
+ String: rsp
+ Type: uint64_t *
+ Type: uint64_t
+ Invalid cast.
+ (gdb)
+
+ The important bit is this:
+
+ Operation: UNOP_CAST
+ Operation: OP_REGISTER
+ String: xmm1
+ Type: uint64_t
+
+ Which is where we cast the xmm1 register to uint64_t. And the final
+ piece of the puzzle is:
+
+ (gdb) ptype $xmm1
+ type = union vec128 {
+ v8bf16 v8_bfloat16;
+ v4f v4_float;
+ v2d v2_double;
+ v16i8 v16_int8;
+ v8i16 v8_int16;
+ v4i32 v4_int32;
+ v2i64 v2_int64;
+ uint128_t uint128;
+ }
+
+ So, we are attempting to cast a union type to a scalar type, which is
+ not supporting in C/C++, and as a consequence GDB's expression
+ evaluator throws an error when we attempt to do this.
+
+ The first approach I considered for solving this problem was to try
+ and make use of gdbarch_stap_adjust_register. We already have a
+ gdbarch method (gdbarch_stap_adjust_register) that allows us to tweak
+ the name of the register that we access. Currently only x86
+ architectures use this to transform things like ax to eax in some
+ cases.
+
+ I wondered, what if we change gdbarch_stap_adjust_register to do more
+ than just change the register names? What if this method instead
+ became gdbarch_stap_read_register. This new method would return a
+ operation_up, and would take the register name, and the type we are
+ trying to read from the register, and return the operation that
+ actually reads the register.
+
+ The default implementation of this method would just use
+ user_reg_map_name_to_regnum, and then create a register_operation,
+ like we already do in stap_parse_register_operand. But, for x86
+ architectures this method would fist possibly adjust the register
+ name, then do the default action to read the register. Finally, for
+ x86 this method would spot when we were accessing an xmm register,
+ and, based on the type being pulled from the register, would extract
+ the correct field from the union.
+
+ The benefit of this approach is that it would work with the expression
+ types that GDB currently supports. The draw back would be that this
+ approach would not be very generic. We'd need code to handle each
+ sub-field size with an xmm register. If other architectures started
+ using vector registers for probe arguments, those architectures would
+ have to create their own gdbarch_stap_read_register method. And
+ finally, the type of the xmm registers comes from the type defined in
+ the target description, there's a risk that GDB might end up
+ hard-coding the names of type sub-fields, then if a target uses a
+ different target description, with different field names for xmm
+ registers, the stap probes would stop working.
+
+ And so, based on all the above draw backs, I rejected this first
+ approach.
+
+ My second plan involves adding a new expression type to GDB called
+ unop_extract_operation. This new expression takes a value and a type,
+ during evaluation the value contents are fetched, and then a new value
+ is extracted from the value contents (based on type). This is similar
+ to the following C expression:
+
+ result_value = *((output_type *) &input_value);
+
+ Obviously we can't actually build this expression in this case, as the
+ input_value is in a register, but hopefully the above makes it clearer
+ what I'm trying to do.
+
+ The benefit of the new expression approach is that this code can be
+ shared across all architectures, and it doesn't care about sub-field
+ names within the union type.
+
+ The draw-backs that I see are potential future problems if arguments
+ are not stored within the least significant bytes of the register.
+ However if/when that becomes an issue we can adapt the
+ gdbarch_stap_read_register approach to allow architectures to control
+ how a value is extracted.
+
+ For testing, I've extended the existing gdb.base/stap-probe.exp test
+ to include a function that tries to force an argument into an xmm
+ register. Obviously, that will only work on a x86 target, so I've
+ guarded the new function with an appropriate GCC define. In the exp
+ script we use readelf to check if the probe exists, and is using the
+ xmm register.
+
+ If the probe doesn't exist then the associated tests are skipped.
+
+ If the probe exists, put isn't using the xmm register (which will
+ depend on systemtap/gcc versions), then again, the tests are skipped.
+
+ Otherwise, we can run the test. I think the cost of running readelf
+ is pretty low, so I don't feel too bad making all the non-xmm targets
+ running this step.
+
+ I found that on a Fedora 35 install, with these packages installed, I
+ was able to run this test and have the probe argument be placed in an
+ xmm register:
+
+ $ rpm -q systemtap gcc glibc
+ systemtap-4.6-4.fc35.x86_64
+ gcc-11.2.1-9.fc35.x86_64
+ glibc-2.34-7.fc35.x86_64
+
+ Finally, as this patch adds a new operation type, then I need to
+ consider how to generate an agent expression for the new operation
+ type.
+
+ I have kicked the can down the road a bit on this. In the function
+ stap_parse_register_operand, I only create a unop_extract_operation in
+ the case where the register type is non-scalar, this means that in
+ most cases I don't need to worry about generating an agent expression
+ at all.
+
+ In the xmm register case, when an unop_extract_operation will be
+ created, I have sketched out how the agent expression could be
+ handled, however, this code is currently not reached. When we try to
+ generate the agent expression to place the xmm register on the stack,
+ GDB hits this error:
+
+ (gdb) trace -probe-stap test:xmmreg
+ Tracepoint 1 at 0x401166
+ (gdb) actions
+ Enter actions for tracepoint 1, one per line.
+ End with a line saying just "end".
+ >collect $_probe_arg0
+ Value not scalar: cannot be an rvalue.
+
+ This is because GDB doesn't currently support placing non-scalar types
+ on the agent expression evaluation stack. Solving this is clearly
+ related to the original problem, but feels a bit like a second
+ problem. I'd like to get feedback on whether my approach to solving
+ the original problem is acceptable or not before I start looking at
+ how to handle xmm registers within agent expressions.
+
+2022-03-21 Steiner H Gunderson <steinar+sourceware@gunderson.no>
+
+ Reduce O(n2) performance overhead when parsing DWARF unit information.
+ PR 28978
+ * dwarf2.c (scan_unit_for_symbols): When performing second pass,
+ check to see if the function or variable being processed is the
+ same as the previous one.
+
+2022-03-21 Jan Beulich <jbeulich@suse.com>
+
+ x86: don't suppress overflow diagnostics in x32 mode
+ Unlike in 64-bit mode, where values wrap at the 64-bit boundary anyway,
+ there's no wrapping at the 32-bit boundary here, and hence overflow
+ detection shouldn't be suppressed just because rela relocations are
+ going to be used.
+
+ The extra check against NO_RELOC is actually a result of an ilp32 test
+ otherwise failing. But thinking about it, reporting overflows for
+ not-really-relocations (typically because of earlier errors) makes
+ little sense in general. Perhaps this should even be extended to non-
+ 64-bit modes.
+
+2022-03-21 Simon Marchi <simon.marchi@efficios.com>
+
+ gdb/testsuite: reformat gdb.python/pretty-print-call-by-hand.py
+ Run black on the file.
+
+ Change-Id: Ifb576137fb7158a0227173f61c1202f0695b3685
+
+2022-03-21 Bruno Larsen <blarsen@redhat.com>
+
+ [gdb/testsuite] test a function call by hand from pretty printer
+ The test case added here is testing the bug gdb/28856, where calling a
+ function by hand from a pretty printer makes GDB crash. There are 6
+ mechanisms to trigger this crash in the current test, using the commands
+ backtrace, up, down, finish, step and continue. Since the failure happens
+ because of use-after-free (more details below) the tests will always
+ have a chance of passing through sheer luck, but anecdotally they seem
+ to fail all of the time.
+
+ The reason GDB is crashing is a use-after-free problem. The above
+ mentioned functions save a pointer to the current frame's information,
+ then calls the pretty printer, and uses the saved pointer for different
+ reasons, depending on the function. The issue happens because
+ call_function_by_hand needs to reset the obstack to get the current
+ frame, invalidating the saved pointer.
+
+2022-03-21 Pedro Alves <pedro@palves.net>
+
+ gdb/testsuite: Installed-GDB testing & data-directory
+ In testsuite/README, we suggest that you can run the testsuite against
+ some other GDB binary by using:
+
+ make check RUNTESTFLAGS=GDB=/usr/bin/gdb
+
+ However, that example isn't fully correct, because with that command
+ line, the testsuite will still pass
+
+ -data-directory=[pwd]/../data-directory
+
+ to /usr/bin/gdb, like e.g.:
+
+ ...
+ builtin_spawn /usr/bin/gdb -nw -nx -data-directory /home/pedro/gdb/build/gdb/testsuite/../data-directory -iex set height 0 -iex set width 0
+ ...
+
+ while if you're testing an installed GDB (the system GDB being the
+ most usual scenario), then you should normally let it use its own
+ configured directory, not the just-built GDB's data directory.
+
+ This commit improves the status quo with the following two changes:
+
+ - if the user specifies GDB on the command line, then by default,
+ don't start GDB with the -data-directory command line option.
+ I.e., let the tested GDB use its own configured data directory.
+
+ - let the user override the data directory, via a new
+ GDB_DATA_DIRECTORY global. This replaces the existing
+ BUILD_DATA_DIRECTORY variable in testsuite/lib/gdb.exp, which
+ wasn't overridable, and was a bit misnamed for the new purpose.
+
+ So after this, the following commands I believe behave intuitively:
+
+ # Test the non-installed GDB in some build dir:
+
+ make check \
+ RUNTESTFLAGS="GDB=/path/to/other/build/gdb \
+ GDB_DATA_DIRECTORY=/path/to/other/build/gdb/data-directory"
+
+ # Test the GDB installed in some prefix:
+
+ make check \
+ RUNTESTFLAGS="GDB=/opt/gdb/bin/gdb"
+
+ # Test the built GDB with some alternative data directory, e.g., the
+ system GDB's data directory:
+
+ make check \
+ RUNTESTFLAGS="GDB_DATA_DIRECTORY=/usr/share/gdb"
+
+ Change-Id: Icdc21c85219155d9564a9900961997e6624b78fb
+
+2022-03-21 Nick Clifton <nickc@redhat.com>
+
+ z80 assembler: Fix new unexpected overflow warning in v2.37
+ PR 28791
+ * config/tc-z80.c (emit_data_val): Do not warn about overlarge
+ constants generated by bit manipulation operators.
+ * testsuite/gas/z80/pr28791.s: New test source file.
+ * testsuite/gas/z80/pr28791.d: New test driver file.
+
+2022-03-21 Andreas Schwab <schwab@linux-m68k.org>
+
+ Add support for readline 8.2
+ In readline 8.2 the type of rl_completer_word_break_characters changed to
+ include const.
+
+2022-03-21 GDB Administrator <gdbadmin@sourceware.org>
+
+ Automatic date update in version.in
+
+2022-03-20 Andreas Schwab <schwab@linux-m68k.org>
+
+ RISC-V: Fix misplaced @end table
+ Move the csr-check and arch items inside the table for the .option directive.
+
+2022-03-20 Alan Modra <amodra@gmail.com>
+
+ PR28979, internal error in demand_empty_rest_of_line
+ The change in read_a_source_file prevents the particular testcase in
+ the PR from triggering the assertion in demand_empty_rest_of_line.
+ I've also removed the assertion. Nothing much goes wrong with gas if
+ something else triggers it, so it's not worthy of an abort.
+
+ I've also changed my previous patch to ignore_rest_of_line to allow
+ that function to increment input_line_pointer past buffer_limit, like
+ demand_empty_rest_of_line: The two functions ought to behave the
+ same in that respect. Finally, demand_empty_rest_of_line gets a
+ little hardening to prevent accesses past buffer_limit plus one.
+
+ PR 28979
+ * read.c (read_a_source_file): Calculate known size for sbuf
+ rather than calling strlen.
+ (demand_empty_rest_of_line): Remove "know" check. Expand comment.
+ Don't dereference input_line_pointer when past buffer_limit.
+ (ignore_rest_of_line): Allow input_line_pointer to increment to
+ buffer_limit plus one. Expand comment.
+
+2022-03-20 Joel Brobecker <brobecker@adacore.com>
+
+ Update gdb/NEWS after GDB 12 branch creation.
+ This commit a new section for the next release branch, and renames
+ the section of the current branch, now that it has been cut.
+
+2022-03-20 Joel Brobecker <brobecker@adacore.com>
+
+ Bump version to 13.0.50.DATE-git.
+ Now that the GDB 12 branch has been created,
+ this commit bumps the version number in gdb/version.in to
+ 13.0.50.DATE-git
+
+ For the record, the GDB 12 branch was created
+ from commit 2be64de603f8b3ae359d2d3fbf5db0e79869f32b.
+
+ Also, as a result of the version bump, the following changes
+ have been made in gdb/testsuite:
+
+ * gdb.base/default.exp: Change $_gdb_major to 13.
+
+2022-03-20 liuzhensong <liuzhensong@loongson.cn>
+
+ ld:LoongArch: Add test cases to adapt to LoongArch32 and LoongArch64
+ ld/testsuite/ld-loongarch-elf
+
+ * ld-loongarch-elf.exp: Test LoongArch32 and LoongArch64 testcases respectively.
+ * jmp_op.d: Fix bug in test LoongArch32.
+ * disas-jirl-32.d: New test case for LoongArch32.
+ * disas-jirl-32.s: New test case for LoongArch32.
+ * disas-jirl.d: Skip test case LoongArch32.
+ * macro_op_32.d: New test case for LoongArch32.
+ * macro_op_32.s: New test case for LoongArch32.
+ * macro_op.d: Skip test case LoongArch32.
+
+2022-03-20 liuzhensong <liuzhensong@loongson.cn>
+
+ gas:LoongArch: Fix "make check" pr21884 fail in LoongArch32.
+ gas/config/
+ * tc-loongarch.c: Add function to select target mach.
+ * tc-loongarch.h: Define macro TARGET_MACH.
+
+ ld: loongarch: Skip unsupport test cases.
+ ld/testsuite/ld-elf/
+ * eh5.d Skip loongarch64 target.
+ * pr21884.d Skip loongarch* targets.
+ * pr26936.d Skip loongarch* targets.
+
+2022-03-20 liuzhensong <liuzhensong@loongson.cn>
+
+ LoongArch: Fix LD check fails.
+ Some test cases about ifunc.
+
+ bfd/
+ * elfnn-loongarch.c
+ * elfxx-loongarch.h
+
+ === ld Summary ===
+ of expected passes 1430
+ of expected failures 11
+ of untested testcases 1
+ of unsupported tests 154
+
+2022-03-20 liuzhensong <liuzhensong@loongson.cn>
+
+ LoongArch: Update ABI eflag in elf header.
+ Update LoongArch ABI eflag in elf header.
+ ilp32s 0x5
+ ilp32f 0x6
+ ilp32d 0x7
+ lp64s 0x1
+ lp64f 0x2
+ lp64d 0x3
+
+ bfd/
+ * elfnn-loongarch.c Check object flags while ld.
+
+ gas/
+ * tc-loongarch.c Write eflag to elf header.
+
+ include/elf
+ * loongarch.h Define ABI number.
+
+2022-03-20 liuzhensong <liuzhensong@loongson.cn>
+
+ gas:LoongArch: Fix wrong line number in .debug_line
+ The dwarf2_emit_insn() can create debuginfo of line. But it is called
+ too late in append_fixp_and_insn. It causes extra offs when debuginfo
+ of line sets address.
+
+ gas/config/
+ * tc-loongarch.c
+
+2022-03-20 liuzhensong <liuzhensong@loongson.cn>
+
+ gas:LoongArch: Fix segment error in compilation due to too long symbol name.
+ Change "char buffer[8192];" into "char *buffer =
+ (char *) malloc(1000 + 6 * len_str);" in function
+ loongarch_expand_macro_with_format_map.
+
+ gas/
+ * config/tc-loongarch.c
+
+ include/
+ * opcode/loongarch.h
+
+ opcodes/
+ * loongarch-coder.c
+
+2022-03-20 liuzhensong <liuzhensong@loongson.cn>
+
+ LoongArch: Use functions instead of magic numbers.
+ Replace the magic numbers in gas(tc-loongarch.c) and
+ bfd(elfnn-loongarch.c) with the functions defined in
+ the howto table(elfxx-loongarch.c).
+
+ gas/
+ * config/tc-loongarch.c: use functions.
+
+ bfd/
+ * elfnn-loongarch.c: use functions.
+ * elfxx-loongarch.c: define functions.
+ * elfxx-loongarch.h
+
+2022-03-20 liuzhensong <liuzhensong@loongson.cn>
+
+ ubsan: loongarch : signed integer shift overflow.
+ opcodes/
+ * loongarch-coder.c :
+ int32_t ret = 0;
+ ret <<= sizeof (ret) * 8 - len;
+ ret >>= sizeof (ret) * 8 - len;
+ ...
+ Avoid ubsan warning.
+
+2022-03-20 GDB Administrator <gdbadmin@sourceware.org>
+
+ Automatic date update in version.in
+
+2022-03-19 Simon Marchi <simon.marchi@efficios.com>
+
+ gdb/python: remove gdb._mi_commands dict
+ The motivation for this patch is the fact that py-micmd.c doesn't build
+ with Python 2, due to PyDict_GetItemWithError being a Python 3-only
+ function:
+
+ CXX python/py-micmd.o
+ /home/smarchi/src/binutils-gdb/gdb/python/py-micmd.c: In function ‘int micmdpy_uninstall_command(micmdpy_object*)’:
+ /home/smarchi/src/binutils-gdb/gdb/python/py-micmd.c:430:20: error: ‘PyDict_GetItemWithError’ was not declared in this scope; did you mean ‘PyDict_GetItemString’?
+ 430 | PyObject *curr = PyDict_GetItemWithError (mi_cmd_dict.get (),
+ | ^~~~~~~~~~~~~~~~~~~~~~~
+ | PyDict_GetItemString
+
+ A first solution to fix this would be to try to replace
+ PyDict_GetItemWithError equivalent Python 2 code. But I looked at why
+ we are doing this in the first place: it is to maintain the
+ `gdb._mi_commands` Python dictionary that we use as a `name ->
+ gdb.MICommand object` map. Since the `gdb._mi_commands` dictionary is
+ never actually used in Python, it seems like a lot of trouble to use a
+ Python object for this.
+
+ My first idea was to replace it with a C++ map
+ (std::unordered_map<std::string, gdbpy_ref<micmdpy_object>>). While
+ implementing this, I realized we don't really need this map at all. The
+ mi_command_py objects registered in the main MI command table can own
+ their backing micmdpy_object (that's a gdb.MICommand, but seen from the
+ C++ code). To know whether an mi_command is an mi_command_py, we can
+ use a dynamic cast. Since there's one less data structure to maintain,
+ there are less chances of messing things up.
+
+ - Change mi_command_py::m_pyobj to a gdbpy_ref, the mi_command_py is
+ now what keeps the MICommand alive.
+ - Set micmdpy_object::mi_command in the constructor of mi_command_py.
+ If mi_command_py manages setting/clearing that field in
+ swap_python_object, I think it makes sense that it also takes care of
+ setting it initially.
+ - Move a bunch of checks from micmdpy_install_command to
+ swap_python_object, and make them gdb_asserts.
+ - In micmdpy_install_command, start by doing an mi_cmd_lookup. This is
+ needed to know whether there's a Python MI command already registered
+ with that name. But we can already tell if there's a non-Python
+ command registered with that name. Return an error if that happens,
+ rather than waiting for insert_mi_cmd_entry to fail. Change the
+ error message to "name is already in use" rather than "may already be
+ in use", since it's more precise.
+
+ I asked Andrew about the original intent of using a Python dictionary
+ object to hold the command objects. The reason was to make sure the
+ objects get destroyed when the Python runtime gets finalized, not later.
+ Holding the objects in global C++ data structures and not doing anything
+ more means that the held Python objects will be decref'd after the
+ Python interpreter has been finalized. That's not desirable. I tried
+ it and it indeed segfaults.
+
+ Handle this by adding a gdbpy_finalize_micommands function called in
+ finalize_python. This is the mirror of gdbpy_initialize_micommands
+ called in do_start_initialization. In there, delete all Python MI
+ commands. I think it makes sense to do it this way: if it was somehow
+ possible to unload Python support from GDB in the middle of a session
+ we'd want to unregister any Python MI command. Otherwise, these MI
+ commands would be backed with a stale PyObject or simply nothing.
+
+ Delete tests that were related to `gdb._mi_commands`.
+
+ Co-Authored-By: Andrew Burgess <aburgess@redhat.com>
+ Change-Id: I060d5ebc7a096c67487998a8a4ca1e8e56f12cd3
+
+2022-03-19 GDB Administrator <gdbadmin@sourceware.org>
+
+ Automatic date update in version.in
+
+2022-03-18 Pedro Alves <pedro@palves.net>
+
+ Fix crash with stepi, no debug info, and "set debug infrun 1"
+ A stepi in a function without debug info with "set debug infrun 1"
+ crashes GDB since commit c8353d682f69 (gdb/infrun: some extra infrun
+ debug print statements), due to a reference to
+ "tp->current_symtab->filename" when tp->current_symtab is null.
+
+ This commit adds the missing null check. The output in this case
+ becomes:
+
+ [infrun] set_step_info: symtab = <null>, line = 0, step_frame_id = {stack=0x7fffffffd980,code=0x0000000000456c30,!special}, step_stack_frame_id = {stack=0x7fffffffd980,code=0x0000000000456c30,!special}
+
+ Change-Id: I5171a9d222bc7e15b9dba2feaba7d55c7acd99f8
+
+2022-03-18 Tom Tromey <tromey@adacore.com>
+
+ Implement gdbarch_stack_frame_destroyed_p for aarch64
+ The internal AdaCore testsuite has a test that checks that an
+ out-of-scope watchpoint is deleted. This fails on some aarch64
+ configurations, reporting an extra stop:
+
+ (gdb) continue
+ Continuing.
+
+ Thread 3 hit Watchpoint 2: result
+
+ Old value = 64
+ New value = 0
+ 0x0000000040021648 in pck.get_val (seed=0, off_by_one=false) at [...]/pck.adb:13
+ 13 end Get_Val;
+
+ I believe what is happening here is that the variable is stored at:
+
+ <efa> DW_AT_location : 2 byte block: 91 7c (DW_OP_fbreg: -4)
+
+ and the extra stop is reported just before a return, when the ldp
+ instruction is executed:
+
+ 0x0000000040021644 <+204>: ldp x29, x30, [sp], #48
+ 0x0000000040021648 <+208>: ret
+
+ This instruction modifies the frame base calculation, and so the test
+ picks up whatever memory is pointed to in the callee frame.
+
+ Implementing the gdbarch hook gdbarch_stack_frame_destroyed_p fixes
+ this problem.
+
+ As usual with this sort of patch, it has passed internal testing, but
+ I don't have a good way to try it with dejagnu. So, I don't know
+ whether some existing test covers this. I suspect there must be one,
+ but it's also worth noting that this test passes for aarch64 in some
+ configurations -- I don't know what causes one to fail and another to
+ succeed.
+
+2022-03-18 Nick Clifton <nickc@redhat.com>
+
+ Fix Build issues due to patch "gprofng: a new GNU profiler"
+ Find and fix more places where clock_gettime() and CLOCK_MONOTONIC_RAW are used.
+
+2022-03-18 Simon Marchi <simon.marchi@efficios.com>
+
+ gdb: run black to format some Python files
+ Seems like some leftovers from previous commits.
+
+ Change-Id: I7155ccdf7a4fef83bcb3d60320252c3628efdb83
+
+2022-03-18 Viorel Preoteasa <viorel.preoteasa@gmail.com>
+
+ Fix ld-arm bug in encoding of blx calls jumping from thumb to arm instructions
+ PR 28924
+ * elf32-arm.c (THM_MAX_FWD_BRANCH_OFFSET): Fix definition.
+ (THM2_MAX_FWD_BRANCH_OFFSET): Likewise.
+
+2022-03-18 Jan Beulich <jbeulich@suse.com>
+
+ x86: also fold remaining multi-vector-size shift insns
+ By slightly relaxing the checking in operand_type_register_match() we
+ can fold the vector shift insns with an XMM source as well. While
+ strictly speaking an overlap in just one size (see the code comment) is
+ not enough (both operands could have multiple sizes with just a single
+ common one), this is good enough for all templates we have, or which
+ could sensibly / usefully appear (within the scope of the present
+ operand matching model).
+
+ Tightening this a little would be possible, but would require broadcast
+ related information to be passed into the function.
+
+2022-03-18 Jan Beulich <jbeulich@suse.com>
+
+ x86: drop stray CheckRegSize from VEXTRACT{F,I}32X4
+ They have only a single operand allowing multiple sizes, hence there are
+ no pairs of operands to check for consistent size.
+
+ x86: fold certain AVX2 templates into their AVX counterparts
+ Like for AVX512VL we can make the handling of operand sizes a little
+ more flexible to allow reducing the number of templates we have.
+
+2022-03-18 Tsukasa OI <research_trasio@irq.a4lg.com>
+
+ RISC-V: Cache management instructions
+ This commit adds 'Zicbom' / 'Zicboz' instructions.
+
+ bfd/ChangeLog:
+
+ * elfxx-riscv.c (riscv_multi_subset_supports): Add handling for
+ new instruction classes.
+
+ include/ChangeLog:
+
+ * opcode/riscv-opc.h (MATCH_CBO_CLEAN, MASK_CBO_CLEAN,
+ MATCH_CBO_FLUSH, MASK_CBO_FLUSH, MATCH_CBO_INVAL,
+ MASK_CBO_INVAL, MATCH_CBO_ZERO, MASK_CBO_ZERO): New macros.
+ * opcode/riscv.h (enum riscv_insn_class): Add new instruction
+ classes INSN_CLASS_ZICBOM and INSN_CLASS_ZICBOZ.
+
+ opcodes/ChangeLog:
+
+ * riscv-opc.c (riscv_opcodes): Add cache-block management
+ instructions.
+
+2022-03-18 Tsukasa OI <research_trasio@irq.a4lg.com>
+
+ RISC-V: Prefetch hint instructions and operand set
+ This commit adds 'Zicbop' hint instructions.
+
+ bfd/ChangeLog:
+
+ * elfxx-riscv.c (riscv_multi_subset_supports): Add handling for
+ new instruction class.
+
+ gas/ChangeLog:
+
+ * config/tc-riscv.c (riscv_ip): Add handling for new operand
+ type 'f' (32-byte aligned pseudo S-type immediate for prefetch
+ hints).
+ (validate_riscv_insn): Likewise.
+
+ include/ChangeLog:
+
+ * opcode/riscv-opc.h (MATCH_PREFETCH_I, MASK_PREFETCH_I,
+ MATCH_PREFETCH_R, MASK_PREFETCH_R, MATCH_PREFETCH_W,
+ MASK_PREFETCH_W): New macros.
+ * opcode/riscv.h (enum riscv_insn_class): Add new instruction
+ class INSN_CLASS_ZICBOP.
+
+ opcodes/ChangeLog:
+
+ * riscv-dis.c (print_insn_args): Add handling for new operand
+ type.
+ * riscv-opc.c (riscv_opcodes): Add prefetch hint instructions.
+
+2022-03-18 Alan Modra <amodra@gmail.com>
+
+ PR28977 tc-i386.c internal error in parse_register
+ PR 28977
+ * config/tc-i386.c (parse_register): Handle X_op not O_register
+ as for a non-reg_section symbol. Simplify array bounds check.
+
+2022-03-18 Alan Modra <amodra@gmail.com>
+
+ Tidy gas current_frame before exit
+ Releases some obstack memory on an error path.
+
+ * cond.c (cond_finish_check): Call cond_exit_macro.
+
+2022-03-18 Alan Modra <amodra@gmail.com>
+
+ ubsan: logical_input_line signed integer overflow
+ To avoid a completely useless fuzzing ubsan "bug" report, I decided to
+ make logical_input_line unsigned.
+
+ * input-scrub.c (logical_input_line): Make unsigned.
+ (struct input_save): Here too.
+ (input_scrub_reinit, input_scrub_close, bump_line_counters),
+ (as_where): Adjust to suit.
+
+2022-03-18 GDB Administrator <gdbadmin@sourceware.org>
+
+ Automatic date update in version.in
+
+2022-03-17 H.J. Lu <hjl.tools@gmail.com>
+
+ gprofng: Skip jsynprog with a broken javac
+ On CET enabled Linux/x86-64 machines, one can get
+
+ $ javac simple.java
+ Error: dl failure on line 894
+ Error: failed /usr/lib/jvm/java-1.8.0-openjdk-1.8.0.322.b06-6.fc35.x86_64/jre/lib/amd64/server/libjvm.so, because /usr/lib/jvm/java-1.8.0-openjdk-1.8.0.322.b06-6.fc35.x86_64/jre/lib/amd64/server/libjvm.so: rebuild shared object with SHSTK support enabled
+
+ Set GPROFNG_BROKEN_JAVAC to "yes" only with a broken javac and skip the
+ jsynprog test with a broken javac.
+
+ PR gprofng/28965
+ * Makefile.am (GPROFNG_BROKEN_JAVAC): New.
+ (check-DEJAGNU): Pass GPROFNG_BROKEN_JAVAC to runtest.
+ * configure.ac (GPROFNG_BROKEN_JAVAC): New AC_SUBST. Set to yes
+ with a broken javac.
+ * Makefile.in: Regenerate.
+ * configure: Likewise.
+ * testsuite/gprofng.display/display.exp: Skip jsynprog with a
+ broken javac.
+
+2022-03-17 John Baldwin <jhb@FreeBSD.org>
+
+ Remove fall throughs in core_target::xfer_partial.
+ The cases for TARGET_OBJECT_LIBRARIES and TARGET_OBJECT_LIBRARIES_AIX
+ can try to fetch different data objects (such as
+ TARGET_OBJECT_SIGNAL_INFO) if gdbarch methods for the requested data
+ aren't present. Return with TARGET_XFER_E_IO if the gdbarch method
+ isn't present instead.
+
+2022-03-17 Pedro Alves <pedro@palves.net>
+
+ gdb: Remove support for S+core
+ GCC removed support for score back in 2014 already. Back then, we
+ basically agreed about removing it from GDB too, but it ended up being
+ forgotten. See:
+
+ https://sourceware.org/pipermail/gdb/2014-October/044643.html
+
+ Following through this time around.
+
+ Change-Id: I5b25a1ff7bce7b150d6f90f4c34047fae4b1f8b4
+
+2022-03-17 Tom Tromey <tromey@adacore.com>
+
+ Add another test for Ada Wide_Wide_String
+ In an earlier patch, I had written that I wanted to add this test:
+
+ ptype Wide_Wide_String'("literal")
+
+ ... but that it failed with the distro GNAT. Further investigation
+ showed that it could be made to work by adding a function using
+ Wide_Wide_String to the program -- this caused the type to end up in
+ the debug info.
+
+ This patch adds the test. I'm checking this in.
+
+2022-03-17 Alan Modra <amodra@gmail.com>
+
+ ubsan: Null dereference in parse_module
+ * vms-alpha.c (parse_module): Sanity check that DST__K_RTNBEG
+ has set module->func_table for DST__K_RTNEND. Check return
+ of bfd_zalloc.
+
+2022-03-17 Alan Modra <amodra@gmail.com>
+
+ asan: Buffer overflow in evax_bfd_print_dst
+ With "name" a char*, the length at name[0] might be negative, escaping
+ buffer limit checks.
+
+ * vms-alpha.c (evax_bfd_print_dst): Make name an unsigned char*.
+ (evax_bfd_print_emh): Likewise.
+
+2022-03-17 Alan Modra <amodra@gmail.com>
+
+ asan: Buffer overflow in som_set_reloc_info
+ * som.c (som_set_reloc_info): Add symcount parameter. Don't
+ access symbols past symcount. Don't access fixup past end_fixups.
+ (som_slurp_reloc_table): Adjust som_set_reloc_info calls.
+
+2022-03-17 Alan Modra <amodra@gmail.com>
+
+ asan: use of uninitialized value in buffer_and_nest
+ More occurences of the same as commit d12b8d620c6a.
+
+ * macro.c (buffer_and_nest): Sanity check length in buffer
+ before calling strncasecmp.
+
+2022-03-17 Alan Modra <amodra@gmail.com>
+
+ gprofng configure target tests
+ ${target} in configure.ac should be the canonical target, so that for
+ example, someone configuring with --target=x86_64-linux will match
+ x86_64-*-linux*.
+
+ * configure.ac: Invoke AC_CANONICAL_TARGET.
+ * libcollector/configure.ac: Likewise.
+ * Makefile.in: Regenerate.
+ * configure: Regenerate.
+ * doc/Makefile.in: Regenerate.
+ * gp-display-html/Makefile.in: Regenerate.
+ * libcollector/Makefile.in: Regenerate.
+ * libcollector/configure: Regenerate.
+ * src/Makefile.in: Regenerate.
+
+2022-03-17 Alan Modra <amodra@gmail.com>
+
+ Re: asan: buffer overflow in peXXigen.c
+ In the process of fixing a buffer overflow in commit fe69d4fcf0194a,
+ I managed to introduce a fairly obvious NULL pointer dereference..
+
+ * peXXigen.c (_bfd_XX_bfd_copy_private_bfd_data_common): Don't
+ segfault on not finding section. Wrap overlong lines.
+
+2022-03-17 Alan Modra <amodra@gmail.com>
+
+ asan: buffer overflows after calling ignore_rest_of_line
+ operand() is not a place that should be calling ignore_rest_of_line.
+ ignore_rest_of_line shouldn't increment input_line_pointer if already
+ at buffer limit.
+
+ * expr.c (operand): Don't call ignore_rest_of_line.
+ * read.c (s_mri_common): Likewise.
+ (ignore_rest_of_line): Don't increment input_line_pointer if
+ already at buffer_limit.
+
+2022-03-17 Alan Modra <amodra@gmail.com>
+
+ Re: bfd: add AMDGCN architecture
+ * po/SRC-POTFILES.in: Regenerate.
+
+2022-03-17 Jan Beulich <jbeulich@suse.com>
+
+ x86: don't accept base architectures as extensions
+ The -march= intentions are quite clear: A base architecture may be
+ followed by any number of extensions. Accepting a base architecture in
+ place of an extension will at best result in confusion, as the first of
+ the two (or more) items specified simply would not take effect, due to
+ being overridden by the later one(s).
+
+2022-03-17 Jan Beulich <jbeulich@suse.com>
+
+ x86: never set i386_cpu_flags' "unused" field
+ Setting this field risks cpu_flags_all_zero() mistakenly returning
+ "false" when the object passed in was e.g. the result of ANDing together
+ two objects which had the bit set, or ANDNing together an object with
+ the field set and one with the field clear.
+
+ While there also avoid setting CpuNo64: Like Cpu64 this is driven
+ differently anyway and hence shouldn't be set anywhere by default.
+
+ Note that the moving of the two items in i386-gen.c's cpu_flags[] is
+ only for documentation purposes (and slight reducing of overhead), as
+ the fields are sorted anyway upon program start.
+
+2022-03-17 Jan Beulich <jbeulich@suse.com>
+
+ x86: unify CPU flag on/off processing
+ There's no need for the arbitrary special "unknown" token: Simply
+ recognize the leading ~ and process everything else the same, merely
+ recording whether to set individual fields to 1 or 0.
+
+ While there exclude CpuIAMCU from CPU_UNKNOWN_FLAGS - CPU_IAMCU_FLAGS
+ override cpu_arch_flags anyway when -march=iamcu is passed, and there's
+ no reason to have the stray flag set even if no insn actually is keyed
+ to it.
+
+2022-03-17 Jan Beulich <jbeulich@suse.com>
+
+ x86: add another IAMCU testcase
+ Now that {L,K}1OM support is gone, and with it the brokenness in
+ check_cpu_arch_compatible(), put in place a test making sure that only
+ extensions can be enabled via .arch for IAMCU, and that the base
+ architecture cannot be changed.
+
+ x86: drop L1OM/K1OM support from gas
+ This was only rudimentary support anyway; none of the sub-architecture
+ specific insns were ever supported.
+
+ x86: assorted IAMCU CPU checking fixes
+ The checks done by check_cpu_arch_compatible() were halfway sensible
+ only at the time where only L1OM support was there. The purpose,
+ however, has always been to prevent bad uses of .arch (turning off the
+ base CPU "feature" flag) while at the same time permitting extensions to
+ be enabled / disabled. In order to achieve this (and to prevent
+ regressions when L1OM and K1OM support are removed)
+ - set CpuIAMCU in CPU_IAMCU_FLAGS,
+ - adjust the IAMCU check in the function itself (the other two similarly
+ broken checks aren't adjusted as they're slated to be removed anyway),
+ - avoid calling the function for extentions (which would never have the
+ base "feature" flag set),
+ - add a new testcase actually exercising ".arch iamcu" (which would also
+ regress with the planned removal).
+
+2022-03-17 GDB Administrator <gdbadmin@sourceware.org>
+
+ Automatic date update in version.in
+
+2022-03-16 Andrew Burgess <aburgess@redhat.com>
+
+ gdb: work around prompt corruption caused by bracketed-paste-mode
+ In this commit:
+
+ commit b4f26d541aa7224b70d363932e816e6e1a857633
+ Date: Tue Mar 2 13:42:37 2021 -0700
+
+ Import GNU Readline 8.1
+
+ We imported readline 8.1 into GDB. As a consequence bug PR cli/28833
+ was reported. This bug spotted that, when the user terminated GDB by
+ sending EOF (usually bound to Ctrl+d), the last prompt would become
+ corrupted. Here's what happens, the user is sat at a prompt like
+ this:
+
+ (gdb)
+
+ And then the user sends EOF (Ctrl+d), we now see this:
+
+ quit)
+ ... gdb terminates, and we return to the shell ...
+
+ Notice the 'quit' was printed over the prompt.
+
+ This problem is a result of readline 8.1 enabling bracketed paste mode
+ by default. This problem is present in readline 8.0 too, but in that
+ version of readline bracketed paste mode is off by default, so a user
+ will not see the bug unless they specifically enable the feature.
+
+ Bracketed paste mode is available in readline 7.0 too, but the bug
+ is not present in this version of readline, see below for why.
+
+ What causes this problem is how readline disables bracketed paste
+ mode. Bracketed paste mode is a terminal feature that is enabled and
+ disabled by readline emitting a specific escape sequence. The problem
+ for GDB is that the escape sequence to disable bracketed paste mode
+ includes a '\r' character at the end, see this thread for more
+ details:
+
+ https://lists.gnu.org/archive/html/bug-bash/2018-01/msg00097.html
+
+ The change to add the '\r' character to the escape sequence used to
+ disable bracketed paste mode was introduced between readline 7.0 and
+ readline 8.0, this is why the bug would not occur when using older
+ versions of readline (note: I don't know if its even possible to build
+ GDB using readline 7.0. That really isn't important, I'm just
+ documenting the history of this issue).
+
+ So, the escape sequence to disable bracketed paste mode is emitted
+ from the readline function rl_deprep_terminal, this is called after
+ the user has entered a complete command and pressed return, or, if the
+ user sends EOF.
+
+ However, these two cases are slightly different. In the first case,
+ when the user has entered a command and pressed return, the cursor
+ will have moved to the next, empty, line, before readline emits the
+ escape sequence to leave bracketed paste mode. The final '\r'
+ character moves the cursor back to the beginning of this empty line,
+ which is harmless.
+
+ For the EOF case though, this is not what happens. Instead, the
+ escape sequence to leave bracketed paste mode is emitted on the same
+ line as the prompt. The final '\r' moves the cursor back to the start
+ of the prompt line. This leaves us ready to override the prompt.
+
+ It is worth noting, that this is not the intended behaviour of
+ readline, in rl_deprep_terminal, readline should emit a '\n' character
+ when EOF is seen. However, due to a bug in readline this does not
+ happen (the _rl_eof_found flag is never set). This is the first
+ readline bug that effects GDB.
+
+ GDB prints the 'quit' message from command_line_handler (in
+ event-top.c), this function is called (indirectly) from readline to
+ process the complete command line, but also in the EOF case (in which
+ case the command line is set to nullptr). As this is part of the
+ callback to process a complete command, this is called after readline
+ has disabled bracketed paste mode (by calling rl_deprep_terminal).
+
+ And so, when bracketed paste mode is in use, rl_deprep_terminal leaves
+ the cursor at the start of the prompt line (in the EOF case), and
+ command_line_handler then prints 'quit', which overwrites the prompt.
+
+ The solution to this problem is to print the 'quit' message earlier,
+ before rl_deprep_terminal is called. This is easy to do by using the
+ rl_deprep_term_function hook. It is this hook that usually calls
+ rl_deprep_terminal, however, if we replace this with a new function,
+ we can print the 'quit' string, and then call rl_deprep_terminal
+ ourselves. This allows the 'quit' to be printed before
+ rl_deprep_terminal is called.
+
+ The problem here is that there is no way in rl_deprep_terminal to know
+ if readline is processing EOF or not, and as a result, we don't know
+ when we should print 'quit'. This is the second readline bug that
+ effects GDB.
+
+ Both of these readline issues are discussed in this thread:
+
+ https://lists.gnu.org/archive/html/bug-readline/2022-02/msg00021.html
+
+ The result of that thread was that readline was patched to address
+ both of these issues.
+
+ Now it should be easy to backport the readline fix to GDB's in tree
+ copy of readline, and then change GDB to make use of these fixes to
+ correctly print the 'quit' string.
+
+ However, we are just about to branch GDB 12, and there is concern from
+ some that changing readline this close to a new release is a risky
+ idea, see this thread:
+
+ https://sourceware.org/pipermail/gdb-patches/2022-March/186391.html
+
+ So, this commit doesn't change readline at all. Instead, this commit
+ is the smallest possible GDB change in order to avoid the prompt
+ corruption.
+
+ In this commit I change GDB to print the 'quit' string on the line
+ after the prompt, but only when bracketed paste mode is on. This
+ avoids the overwriting issue, the user sees this:
+
+ (gdb)
+ quit
+ ... gdb terminates, and returns to the shell ...
+
+ This isn't ideal, but is better than the existing behaviour. After
+ GDB 12 has branched, we can backport the readline fix, and apply a
+ real fix to GDB.
+
+ Bug: https://sourceware.org/bugzilla/show_bug.cgi?id=28833
+
+2022-03-16 Fangrui Song <i@maskray.me>
+
+ objcopy --weaken-symbol: apply to STB_GNU_UNIQUE symbols
+ PR binutils/28926
+ * objcopy.c (filter_symbols): Apply weaken to STB_GNU_UNIQUE symbols
+ * NEWS: Mention feature.
+ * testsuite/binutils-all/objcopy.exp (objcopy_test_symbol_manipulation): New test.
+ * testsuite/binutils-all/weaken-gnu-unique.s: New.
+
+2022-03-16 Tom Tromey <tromey@adacore.com>
+
+ Reimplement array concatenation for Ada and D
+ This started as a patch to implement string concatenation for Ada.
+ However, while working on this, I looked at how this code could
+ possibly be called. It turns out there are only two users of
+ concat_operation: Ada and D. So, in addition to implementing this for
+ Ada, this patch rewrites value_concat, removing the odd "concatenate
+ or repeat" semantics, which were completely unused. As Ada and D both
+ seem to represent strings using TYPE_CODE_ARRAY, this removes the
+ TYPE_CODE_STRING code from there as well.
+
+ Remove eval_op_concat
+ eval_op_concat has code to search for an operator overload of
+ BINOP_CONCAT. However, the operator overloading code is specific to
+ C++, which does not have this operator. And,
+ binop_types_user_defined_p rejects this case right at the start, and
+ value_x_binop does not handle this case. I think this code has been
+ dead for a very long time. This patch removes it and hoists the
+ remaining call into concatenation::evaluate, removing eval_op_concat
+ entirely.
+
+2022-03-16 Tom Tromey <tromey@adacore.com>
+
+ Ada support for wide strings
+ This adds some basic support for Wide_String and Wide_Wide_String to
+ the Ada expression evaluator. In particular, a string literal may be
+ converted to a wide or wide-wide string depending on context.
+
+ The patch updates an existing test case. Note that another test,
+ namely something like:
+
+ ptype Wide_Wide_String'("literal")
+
+ ... would be nice to add, but when tested against a distro GNAT, this
+ did not work (probably due to lack of debuginfo); so, I haven't
+ included it here.
+
+2022-03-16 Tom Tromey <tromey@adacore.com>
+
+ Remove eval_op_string
+ eval_op_string is only used in a single place -- the implementation of
+ string_operation. This patch turns it into the
+ string_operation::evaluate method, removing a bit of extraneous code.
+
+2022-03-16 Carl Love <cel@us.ibm.com>
+
+ Powerpc fix for gdb.base/ending-run.exp
+ The last two tests in gdb.base/ending-run.exp case fail on Powerpc when the
+ system does not have the needed glibc debug-info files loaded. In this
+ case, gdb is not able to determine where execution stopped. This behavior
+ looks as follows for the test case:
+
+ The next to the last test does a next command when the program is stopped
+ at the closing bracket for main. The message printed is:
+
+ 0x00007ffff7d01524 in ?? () from /lib/powerpc64le-linux-gnu/libc.so.6
+
+ which fails to match any of the test_multiple options.
+
+ The test then does another next command. On Powerpc, the
+ message printed it:
+
+ Cannot find bounds of current function
+
+ The test fails as the output does not match any of the options for the
+ gdb_test_multiple.
+
+ I checked the behavior on Powerpc to see if this is typical.
+ I ran gdb on the following simple program as shown below.
+
+ #include <stdio.h>
+ int
+ main(void)
+ {
+ printf("Hello, world!\n");
+ return 0;
+ }
+
+ gdb ./hello_world
+ <snip the gdb start info>
+
+ Type "apropos word" to search for commands related to "word"...
+ Reading symbols from ./hello_world...
+ (No debugging symbols found in ./hello_world)
+ (gdb) break main
+ Breakpoint 1 at 0x818
+ (gdb) r
+
+ Starting program: /home/carll/hello_world
+ [Thread debugging using libthread_db enabled]
+ Using host libthread_db library "/lib/powerpc64le-linux-gnu/libthread_db.so.1".
+
+ Breakpoint 1, 0x0000000100000818 in main ()
+ (gdb) n
+ Single stepping until exit from function main,
+ which has no line number information.
+ Hello, world!
+ 0x00007ffff7d01524 in ?? () from /lib/powerpc64le-linux-gnu/libc.so.6
+ (gdb) n
+ Cannot find bounds of current function
+
+ So it would seem that the messages seen from the test case are
+ "normal" output for Powerpc when the debug-info is not available.
+
+ The following patch adds the output from Powerpc as an option
+ to the gdb_test_multiple statement, identifying the output as the expected
+ output on Powerpc without the needed debug-info files installed.
+
+ The patch has been tested on a Power 10 system and an Intel
+ 64-bit system. No additional regression failures were seen on
+ either platform.
+
+2022-03-16 Martin Storsj? <martin@martin.st>
+
+ dlltool: Use the output name as basis for deterministic temp prefixes
+ PR 28885
+ * dlltool.c (main): use imp_name rather than dll_name when
+ generating a temporary file name.
+
+2022-03-16 Jan Vrany <jan.vrany@labware.com>
+ Andrew Burgess <aburgess@redhat.com>
+
+ gdb/mi: consistently notify user when GDB/MI client uses -thread-select
+ GDB notifies users about user selected thread changes somewhat
+ inconsistently as mentioned on gdb-patches mailing list here:
+
+ https://sourceware.org/pipermail/gdb-patches/2022-February/185989.html
+
+ Consider GDB debugging a multi-threaded inferior with both CLI and GDB/MI
+ interfaces connected to separate terminals.
+
+ Assuming inferior is stopped and thread 1 is selected, when a thread
+ 2 is selected using '-thread-select 2' command on GDB/MI terminal:
+
+ -thread-select 2
+ ^done,new-thread-id="2",frame={level="0",addr="0x00005555555551cd",func="child_sub_function",args=[],file="/home/jv/Projects/gdb/users_jv_patches/gdb/testsuite/gdb.mi/user-selected-context-sync.c",fullname="/home/uuu/gdb/gdb/testsuite/gdb.mi/user-selected-context-sync.c",line="30",arch="i386:x86-64"}
+ (gdb)
+
+ and on CLI terminal we get the notification (as expected):
+
+ [Switching to thread 2 (Thread 0x7ffff7daa640 (LWP 389659))]
+ #0 child_sub_function () at /home/uuu/gdb/gdb/testsuite/gdb.mi/user-selected-context-sync.c:30
+ 30 volatile int dummy = 0;
+
+ However, now that thread 2 is selected, if thread 1 is selected
+ using 'thread-select --thread 1 1' command on GDB/MI terminal
+ terminal:
+
+ -thread-select --thread 1 1
+ ^done,new-thread-id="1",frame={level="0",addr="0x0000555555555294",func="main",args=[],file="/home/jv/Projects/gdb/users_jv_patches/gdb/testsuite/gdb.mi/user-selected-context-sync.c",fullname="/home/jv/Projects/gdb/users_jv_patches/gdb/testsuite/gdb.mi/user-selected-context-sync.c",line="66",arch="i386:x86-64"}
+ (gdb)
+
+ but no notification is printed on CLI terminal, despite the fact
+ that user selected thread has changed.
+
+ The problem is that when `-thread-select --thread 1 1` is executed
+ then thread is switched to thread 1 before mi_cmd_thread_select () is
+ called, therefore the condition "inferior_ptid != previous_ptid"
+ there does not hold.
+
+ To address this problem, we have to move notification logic up to
+ mi_cmd_execute () where --thread option is processed and notify
+ user selected contents observers there if context changes.
+
+ However, this in itself breaks GDB/MI because it would cause context
+ notification to be sent on MI channel. This is because by the time
+ we notify, MI notification suppression is already restored (done in
+ mi_command::invoke(). Therefore we had to lift notification suppression
+ logic also up to mi_cmd_execute (). This change in made distinction
+ between mi_command::invoke() and mi_command::do_invoke() unnecessary
+ as all mi_command::invoke() did (after the change) was to call
+ do_invoke(). So this patches removes do_invoke() and moves the command
+ execution logic directly to invoke().
+
+ With this change, all gdb.mi tests pass, tested on x86_64-linux.
+
+ Bug: https://sourceware.org/bugzilla/show_bug.cgi?id=20631
+
+2022-03-16 H.J. Lu <hjl.tools@gmail.com>
+
+ gprofng: Use symver attribute if available
+ Use symver attribute if available, instead of asm statement, to support
+ LTO build.
+
+ PR gprof/28962
+ * libcollector/dispatcher.c (timer_create@@GLIBC_2.3.3): Use
+ SYMVER_ATTRIBUTE.
+ (timer_create@GLIBC_2.2): Likewise.
+ (timer_create@GLIBC_2.2.5): Likewise.
+ (pthread_create@@GLIBC_2.1): Likewise.
+ (pthread_create@GLIBC_2.0): Likewise.
+ * libcollector/iotrace.c (open64@@GLIBC_2.2): Likewise.
+ (open64@GLIBC_2.1): Likewise.
+ (fopen@@GLIBC_2.1): Likewise.
+ (fopen@GLIBC_2.0): Likewise.
+ (fclose@@GLIBC_2.1): Likewise.
+ (fclose@GLIBC_2.0): Likewise.
+ (fdopen@@GLIBC_2.1): Likewise.
+ (fdopen@GLIBC_2.0): Likewise.
+ (pread@@GLIBC_2.2): Likewise.
+ (pread@GLIBC_2.1): Likewise.
+ (pwrite@@GLIBC_2.2): Likewise.
+ (pwrite@GLIBC_2.1): Likewise.
+ (pwrite64@@GLIBC_2.2): Likewise.
+ (pwrite64@GLIBC_2.1): Likewise.
+ (fgetpos@@GLIBC_2.2): Likewise.
+ (fgetpos@GLIBC_2.0): Likewise.
+ (fgetpos64@@GLIBC_2.2): Likewise.
+ (fgetpos64@GLIBC_2.1): Likewise.
+ (fsetpos@@GLIBC_2.2): Likewise.
+ (fsetpos@GLIBC_2.0): Likewise.
+ (fsetpos64@@GLIBC_2.2): Likewise.
+ (fsetpos64@GLIBC_2.1): Likewise.
+ * libcollector/linetrace.c (posix_spawn@@GLIBC_2.15): Likewise.
+ (posix_spawn@GLIBC_2.2): Likewise.
+ (posix_spawn@GLIBC_2.2.5): Likewise.
+ (posix_spawnp@@GLIBC_2.15): Likewise.
+ (posix_spawnp@GLIBC_2.2): Likewise.
+ (posix_spawnp@GLIBC_2.2.5): Likewise.
+ (popen@@GLIBC_2.1): Likewise.
+ (popen@GLIBC_2.0): Likewise.
+ (_popen@@GLIBC_2.1): Likewise.
+ (_popen@GLIBC_2.0): Likewise.
+ * libcollector/mmaptrace.c (dlopen@@GLIBC_2.1): Likewise.
+ (dlopen@GLIBC_2.0): Likewise.
+ * libcollector/synctrace.c (pthread_cond_wait@@GLIBC_2.3.2):
+ Likewise.
+ (pthread_cond_wait@GLIBC_2.0): Likewise.
+ (pthread_cond_wait@GLIBC_2.2.5): Likewise.
+ (pthread_cond_wait@GLIBC_2.2): Likewise.
+ (pthread_cond_timedwait@@GLIBC_2.3.2): Likewise.
+ (pthread_cond_timedwait@GLIBC_2.0): Likewise.
+ (pthread_cond_timedwait@GLIBC_2.2.5): Likewise.
+ (pthread_cond_timedwait@GLIBC_2.2): Likewise.
+ (sem_wait@@GLIBC_2.1): Likewise.
+ (sem_wait@GLIBC_2.0): Likewise.
+ * src/collector_module.h (SYMVER_ATTRIBUTE): New.
+
+2022-03-16 H.J. Lu <hjl.tools@gmail.com>
+
+ gprofng: Don't hardcode -Wno-format-truncation/-Wno-switch
+ Use -Wno-format-truncation and -Wno-switch only if they are supported.
+
+ PR gprof/28969
+ * configure.ac (GPROFNG_NO_FORMAT_TRUNCATION_CFLAGS): New
+ AC_SUBST for -Wno-format-truncation.
+ (GPROFNG_NO_SWITCH_CFLAGS): New AC_SUBST for -Wno-switch.
+ * Makefile.in: Regenerate.
+ * configure: Likewise.
+ * src/Makefile.am (AM_CFLAGS): Replace -Wno-format-truncation
+ and -Wno-switch with GPROFNG_NO_FORMAT_TRUNCATION_CFLAGS and
+ GPROFNG_NO_SWITCH_CFLAGS.
+ * src/Makefile.in: Regenerate.
+
+2022-03-16 H.J. Lu <hjl.tools@gmail.com>
+
+ gprofng: Don't hardcode -Wno-nonnull-compare
+ Use -Wno-nonnull-compare only if it is supported.
+
+ PR gprof/28969
+ * libcollector/Makefile.am (AM_CFLAGS): Replace
+ -Wno-nonnull-compare with GPROFNG_NO_NONNULL_COMPARE_CFLAGS.
+ * libcollector/configure.ac (GPROFNG_NO_NONNULL_COMPARE_CFLAGS):
+ New AC_SUBST for -Wno-nonnull-compare.
+ * libcollector/Makefile.in: Regenerate.
+ * libcollector/aclocal.m4: Likewise.
+ * libcollector/configure: Likewise.
+
+2022-03-16 H.J. Lu <hjl.tools@gmail.com>
+
+ gprofng: Define ATTRIBUTE_FALLTHROUGH
+ Define ATTRIBUTE_FALLTHROUGH to __attribute__ ((fallthrough)) only for
+ GCC 7 or above.
+
+ PR gprof/28969
+ * common/gp-defs.h (ATTRIBUTE_FALLTHROUGH): New.
+ * src/gp-collect-app.cc (collect::check_args): Replace
+ /* FALLTHROUGH */ with ATTRIBUTE_FALLTHROUGH.
+
+2022-03-16 Simon Marchi <simon.marchi@efficios.com>
+
+ binutils/readelf: handle AMDGPU relocation types
+ Make readelf recognize AMDGPU relocation types, as documented here:
+
+ https://llvm.org/docs/AMDGPUUsage.html#amdgpu-relocation-records
+
+ The user-visible change looks like:
+
+ -000000000004 000400000001 unrecognized: 1 0000000000000000 SCRATCH_RSRC_DWORD0
+ -00000000000c 000500000001 unrecognized: 1 0000000000000000 SCRATCH_RSRC_DWORD1
+ -000000000014 000600000007 unrecognized: 7 0000000000000000 global_var0
+ -00000000001c 000700000008 unrecognized: 8 0000000000000000 global_var1
+ -000000000024 000800000009 unrecognized: 9 0000000000000000 global_var2
+ -00000000002c 00090000000a unrecognized: a 0000000000000000 global_var3
+ -000000000034 000a0000000b unrecognized: b 0000000000000000 global_var4
+ +000000000004 000400000001 R_AMDGPU_ABS32_LO 0000000000000000 SCRATCH_RSRC_DWORD0
+ +00000000000c 000500000001 R_AMDGPU_ABS32_LO 0000000000000000 SCRATCH_RSRC_DWORD1
+ +000000000014 000600000007 R_AMDGPU_GOTPCREL 0000000000000000 global_var0
+ +00000000001c 000700000008 R_AMDGPU_GOTPCREL 0000000000000000 global_var1
+ +000000000024 000800000009 R_AMDGPU_GOTPCREL 0000000000000000 global_var2
+ +00000000002c 00090000000a R_AMDGPU_REL32_LO 0000000000000000 global_var3
+ +000000000034 000a0000000b R_AMDGPU_REL32_HI 0000000000000000 global_var4
+
+ binutils/ChangeLog:
+
+ * readelf.c (dump_relocations): Handle EM_AMDGPU.
+
+ include/ChangeLog:
+
+ * elf/amdgpu.h: Add relocation values.
+
+ Change-Id: I2ed4589f4cd37ea11ad2e0cb38d4b682271e1334
+
+2022-03-16 Simon Marchi <simon.marchi@efficios.com>
+
+ binutils/readelf: build against msgpack, dump NT_AMDGPU_METADATA note contents
+ The AMDGPU HSA OS ABI (code object v3 and above) defines the
+ NT_AMDGPU_METADATA ELF note [1]. The content is a msgpack object
+ describing, among other things, the kernels present in the code object
+ and how to call them.
+
+ I think it would be useful for readelf to be able to display the content
+ of those notes. msgpack is a structured format, a bit like JSON, except
+ not text-based. It is therefore possible to dump the contents in
+ human-readable form without knowledge of the specific layout of the
+ note.
+
+ Add configury to binutils to optionally check for the msgpack C library
+ [2]. Add There is a new --with{,out}-msgpack configure flag, and the actual
+ library lookup is done using pkg-config.
+
+ If msgpack support is enabled, dumping a NT_AMDGPU_METADATA note looks
+ like:
+
+ $ readelf --notes amdgpu-code-object
+ Displaying notes found in: .note
+ Owner Data size Description
+ AMDGPU 0x0000040d NT_AMDGPU_METADATA (code object metadata)
+ {
+ "amdhsa.kernels": [
+ {
+ ".args": [
+ {
+ ".address_space": "global",
+ ".name": "out.coerce",
+ ".offset": 0,
+ ".size": 8,
+ ".value_kind": "global_buffer",
+ },
+ <snip>
+
+ If msgpack support is disabled, dump the contents as hex, as is done
+ with notes that are not handled in a special way. This allows one to
+ decode the contents manually (maybe using a command-line msgpack
+ decoder) if really needed.
+
+ [1] https://llvm.org/docs/AMDGPUUsage.html#code-object-metadata
+ [2] https://github.com/msgpack/msgpack-c/tree/c_master
+
+ binutils/ChangeLog:
+
+ * Makefile.am (readelf_CFLAGS): New.
+ (readelf_LDADD): Add MSGPACK_LIBS.
+ * Makefile.in: Re-generate.
+ * config.in: Re-generate.
+ * configure: Re-generate.
+ * configure.ac: Add --with-msgpack flag and check for msgpack
+ using pkg-config.
+ * readelf.c: Include msgpack.h if HAVE_MSGPACK.
+ (print_note_contents_hex): New.
+ (print_indents): New.
+ (dump_msgpack_obj): New.
+ (dump_msgpack): New.
+ (print_amdgpu_note): New.
+ (process_note): Handle NT_AMDGPU_METADATA note contents.
+ Use print_note_contents_hex.
+
+ Change-Id: Ia60a654e620bc32dfdb1bccd845594e2af328b84
+
+2022-03-16 Simon Marchi <simon.marchi@efficios.com>
+
+ binutils/readelf: handle NT_AMDGPU_METADATA note name
+ Handle the NT_AMDGPU_METADATA note, which is described here:
+
+ https://llvm.org/docs/AMDGPUUsage.html#code-object-v3-note-records
+
+ As of this patch, just print out the name, not the contents, which is in
+ the msgpack format.
+
+ binutils/ChangeLog:
+
+ * readelf.c (get_amdgpu_elf_note_type): New.
+ (process_note): Handle "AMDGPU" notes.
+
+ include/ChangeLog:
+
+ * elf/amdgcn.h (NT_AMDGPU_METADATA): New.
+
+ Change-Id: Id2dba2e2aeaa55ef7464fb35aee9c7d5f96ddb23
+
+2022-03-16 Simon Marchi <simon.marchi@efficios.com>
+
+ binutils/readelf: decode AMDGPU-specific e_flags
+ Decode and print the AMDGPU-specific fields of e_flags, as documented
+ here:
+
+ https://llvm.org/docs/AMDGPUUsage.html#header
+
+ That is:
+
+ - The specific GPU model
+ - Whether the xnack and sramecc features are enabled
+
+ The result looks like:
+
+ - Flags: 0x52f
+ + Flags: 0x52f, gfx906, xnack any, sramecc any
+
+ The flags for the "HSA" OS ABI are properly versioned and documented on
+ that page. But the NONE, PAL and MESA3D OS ABIs are not well documented
+ nor versioned. Taking a peek at the LLVM source code, we see that they
+ encode their flags the same way as HSA v3. For example, for PAL:
+
+ https://github.com/llvm/llvm-project/blob/c8b614cd74a92d85936aed5ac7c642af75ffdc29/llvm/lib/Target/AMDGPU/MCTargetDesc/AMDGPUTargetStreamer.cpp#L601
+
+ So for those other OS ABIs, we read them the same as HSA v3.
+
+ binutils/ChangeLog:
+
+ * readelf.c: Include elf/amdgcn.h.
+ (decode_AMDGPU_machine_flags): New.
+ (get_machine_flags): Handle flags for EM_AMDGPU machine type.
+
+ include/ChangeLog:
+
+ * elf/amdgcn.h: Add EF_AMDGPU_MACH_AMDGCN_* and
+ EF_AMDGPU_FEATURE_* defines.
+
+ Change-Id: Ib5b94df7cae0719a22cf4e4fd0629330e9485c12
+
+2022-03-16 Simon Marchi <simon.marchi@efficios.com>
+
+ binutils/readelf: handle AMDGPU OS ABIs
+ When the machine is EM_AMDGPU, handle the various OS ABIs described
+ here:
+
+ https://llvm.org/docs/AMDGPUUsage.html#header
+
+ For a binary with the HSA OS ABI, the change looks like:
+
+ - OS/ABI: <unknown: 40>
+ + OS/ABI: AMD HSA
+
+ binutils/ChangeLog:
+
+ * readelf.c (get_osabi_name): Handle EM_AMDGPU OS ABIs.
+
+ include/ChangeLog:
+
+ * elf/common.h (ELFOSABI_AMDGPU_PAL, ELFOSABI_AMDGPU_MESA3D):
+ New.
+
+ Change-Id: I383590c390f7dc2fe0f902f50038735626d71863
+
+2022-03-16 Simon Marchi <simon.marchi@efficios.com>
+
+ opcodes: handle bfd_amdgcn_arch in configure script
+ There isn't an actual opcodes implementation for the AMDGCN arch (yet),
+ this is just the bare minimum to get
+
+ $ ./configure --target=amdgcn-hsa-amdhsa --disable-gas
+ $ make all-binutils
+
+ working later in this series.
+
+ opcodes/ChangeLog:
+
+ * configure.ac: Handle bfd_amdgcn_arch.
+ * configure: Re-generate.
+
+ Change-Id: Ib7d7c5533a803ed8b2a293e9275f667ed781ce79
+
+2022-03-16 Simon Marchi <simon.marchi@efficios.com>
+
+ bfd: add AMDGCN architecture
+ Add support for the AMDGCN architecture to BFD.
+
+ This is the bare minimum to get
+
+ $ ./configure --target=amdgcn-hsa-amdhsa --disable-gas
+ $ make all-binutils
+
+ working later in this series.
+
+ The specific AMDGCN models added here are a bit arbitrary, based on
+ what we intend to initially support in GDB. This list will need to be
+ updated in the future anyway. The complete up-to-date list of existing
+ AMDGPU models can be found here:
+
+ https://llvm.org/docs/AMDGPUUsage.html#processors
+
+ The ELF format for this architecture is documented here:
+
+ https://llvm.org/docs/AMDGPUUsage.html#elf-code-object
+
+ The flags for the "HSA" OS ABI are properly versioned and documented on
+ that page. But the NONE, PAL and MESA3D OS ABIs are not well documented
+ nor versioned. Taking a peek at the LLVM source code, we see that they
+ encode their flags the same way as HSA v3. For example, for PAL:
+
+ https://github.com/llvm/llvm-project/blob/c8b614cd74a92d85936aed5ac7c642af75ffdc29/llvm/lib/Target/AMDGPU/MCTargetDesc/AMDGPUTargetStreamer.cpp#L601
+
+ So at least, we know that all AMDGPU objects (of which AMDGCN objects
+ are a subset of) at the time of writing encode the specific GPU model in
+ the EF_AMDGPU_MACH field of e_flags.
+
+ bfd/ChangeLog:
+
+ * Makefile.am (ALL_MACHINES, ALL_MACHINES_CFILES):
+ Add cpu-amdgcn.c.
+ (BFD64_BACKENDS): Add elf64-amdgcn.lo.
+ (BFD64_BACKENDS_CFILES): Add elf64-amdgcn.c.
+ * Makefile.in: Re-generate.
+ * cpu-amdgcn.c: New.
+ * elf64-amdgcn.c: New.
+ * archures.c (bfd_architecture): Add bfd_arch_amdgcn and related
+ mach defines.
+ (bfd_amdgcn_arch): New.
+ (bfd_archures_list): Add bfd_amdgcn_arch.
+ * bfd-in2.h: Re-generate.
+ * config.bfd: Handle amdgcn* target.
+ * configure.ac: Handle amdgcn_elf64_le_vec.
+ * configure: Re-generate.
+ * elf-bfd.h (elf_target_id): Add AMDGCN_ELF_DATA.
+ * targets.c (amdgcn_elf64_le_vec): New.
+ (_bfd_target_vector): Add amdgcn_elf64_le_vec.
+
+ include/ChangeLog:
+
+ * elf/amdgpu.h: New.
+ * elf/common.h (ELFOSABI_AMDGPU_HSA): Add.
+
+ Change-Id: I969f7b14960797e88891c308749a6e341eece5b2
+
+2022-03-16 Nick Clifton <nickc@redhat.com>
+
+ Updated Serbian (for binutils/) and Russian (for gprof/) translations
+
+2022-03-16 Pedro Alves <pedro@palves.net>
+
+ Make gdb.fortran/{array-slices,lbound-ubound} work against gdbserver
+ gdb.fortran/array-slices.exp and gdb.fortran/lbound-ubound.exp were
+ recently disabled unless testing with the native target, because they
+ rely on inferior I/O. However, when testing against gdbserver using
+ the native-gdbserver/native-extended-gdbserver boards, we do have
+ access to inferior I/O.
+
+ The right way to check whether the board can do I/O, is via checking
+ the gdb,noinferiorio board variable. Switch to using that.
+
+ And then, tweak the testcases to expect output to appear in
+ inferior_spawn_id, instead of gdb_spawn_id. When testing against the
+ native target, inferior_spawn_id is the same as gdb_spawn_id. When
+ testing against gdbserver, it maps to gdbserver_spawn_id.
+
+ This exposed a buglet in gdb.fortran/array-slices.f90's show_1d
+ subroutine -- it was missing printing newline at the end of the
+ "Expected GDB Output" text, leading to a test timeout. All other
+ subroutines end with advance=yes, except this one. Fix it by using
+ advance=yes here too.
+
+ Change-Id: I4640729f334431cfc24b0917e7d3977b677c6ca5
+
+2022-03-16 GDB Administrator <gdbadmin@sourceware.org>
+
+ Automatic date update in version.in
+
+2022-03-15 Alan Modra <amodra@gmail.com>
+
+ Delete PowerPC macro insn support
+ Let's hope this stays dead, but it's here as a patch separate from
+ those that removed use of powerpc_macros just in case it needs to be
+ resurrected.
+
+ include/
+ * opcode/ppc.h (struct powerpc_macro): Delete declaration.
+ (powerpc_macros, powerpc_num_macros): Likewise..
+ opcodes/
+ * ppc-opc.c (powerpc_macros, powerpc_num_macros): Delete.
+ gas/
+ * config/tc-ppc.c (ppc_macro): Delete function.
+ (ppc_macro_hash): Delete.
+ (ppc_setup_opcodes, md_assemble): Delete macro support.
+
+2022-03-15 Alan Modra <amodra@gmail.com>
+
+ PowerPC SPE/SPE2 aliases in powerpc_macros
+ * ppc-opc.c (powerpc_macros): Move "evsadd", "evssub", "evsabs",
+ "evsnabs", "evsneg", "evsmul", "evsdiv", "evscmpgt", "evsgmplt",
+ "evsgmpeq", "evscfui", "evscfsi", "evscfuf", "evscfsf", "evsctui",
+ "evsctsi", "evsctuf", "evsctsf", "evsctuiz", "evsctsiz",
+ "evststgt", "evststlt", "evststeq"..
+ (powerpc_opcodes): ..to here.
+ (powerpc_macros): Move "evdotphsssi", "evdotphsssia", "evdotpwsssi",
+ and "evdotpwsssia"..
+ (spe2_opcodes): ..to here.
+
+2022-03-15 Alan Modra <amodra@gmail.com>
+
+ PowerPC VLE extended instructions in powerpc_macros
+ This moves VLE insn out of the macro table. "e_slwi" and "e_srwi"
+ already exist in vle_opcodes as distinct instructions rather than
+ encodings of e_rlwinm.
+
+ opcodes/
+ * ppc-opc.c (vle_opcodes): Typo fix e_rlwinm operand.
+ Add "e_inslwi", "e_insrwi", "e_rotlwi", "e_rotrwi", "e_clrlwi",
+ "e_clrrwi", "e_extlwi", "e_extrwi", and "e_clrlslwi".
+ (powerpc_macros): Delete same. Delete "e_slwi" and "e_srwi" too.
+ gas/
+ * testsuite/gas/ppc/vle-simple-5.d: Update.
+
+2022-03-15 Alan Modra <amodra@gmail.com>
+
+ PowerPC32 extended instructions in powerpc_macros
+ As for PowerPC64, move instructions to the main opcode table.
+
+ opcodes/
+ * ppc-opc.c (insert_crwn, extract_crwn, insert_elwn, extract_elwn),
+ (insert_erwn, extract_erwn, insert_erwb, extract_erwb),
+ (insert_cslwn, extract_cslwb, insert_ilwb, extract_ilwn),
+ (insert_irwb, extract_irwn, insert_rrwn, extract_rrwn),
+ (insert_slwn, extract_slwn, insert_srwn, extract_srwn): New functions.
+ (CRWn, ELWn, ERWn, ERWb, CSLWb, CSLWn, ILWn, ILWb, IRWn, IRWb),
+ (RRWn, SLWn, SRWn): Define and add powerpc_operands entries.
+ (MMB_MASK, MME_MASK, MSHMB_MASK): Define.
+ (powerpc_opcodes): Add "inslwi", "insrwi", "rotrwi", "clrrwi",
+ "slwi", "srwi", "extlwi", "extrwi", "sli", "sri" and corresponding
+ record (ie. dot suffix) forms.
+ (powerpc_macros): Delete same.
+ gas/
+ * testsuite/gas/ppc/476.d: Update.
+ * testsuite/gas/ppc/simpshft.d: Update.
+
+2022-03-15 Alan Modra <amodra@gmail.com>
+
+ PowerPC64 extended instructions in powerpc_macros
+ The extended instructions implemented in powerpc_macros aren't used by
+ the disassembler. That means instructions like "sldi r3,r3,2" appear
+ in disassembly as "rldicr r3,r3,2,61", which is annoying since many
+ other extended instructions are shown.
+
+ Note that some of the instructions moved out of the macro table to the
+ opcode table won't appear in disassembly, because they are aliases
+ rather than a subset of the underlying raw instruction. If enabled,
+ rotrdi, extrdi, extldi, clrlsldi, and insrdi would replace all
+ occurrences of rotldi, rldicl, rldicr, rldic and rldimi. (Or many
+ occurrences in the case of clrlsldi if n <= b was added to the extract
+ functions.)
+
+ The patch also fixes a small bug in opcode sanity checking.
+
+ include/
+ * opcode/ppc.h (PPC_OPSHIFT_SH6): Define.
+ opcodes/
+ * ppc-opc.c (insert_erdn, extract_erdn, insert_eldn, extract_eldn),
+ (insert_crdn, extract_crdn, insert_rrdn, extract_rrdn),
+ (insert_sldn, extract_sldn, insert_srdn, extract_srdn),
+ (insert_erdb, extract_erdb, insert_csldn, extract_csldb),
+ (insert_irdb, extract_irdn): New functions.
+ (ELDn, ERDn, ERDn, RRDn, SRDn, ERDb, CSLDn, CSLDb, IRDn, IRDb):
+ Define and add associated powerpc_operands entries.
+ (powerpc_opcodes): Add "rotrdi", "srdi", "extrdi", "clrrdi",
+ "sldi", "extldi", "clrlsldi", "insrdi" and corresponding record
+ (ie. dot suffix) forms.
+ (powerpc_macros): Delete same from here.
+ gas/
+ * config/tc-ppc.c (insn_validate): Don't modify value passed
+ to operand->insert for PPC_OPERAND_PLUS1 when calculating mask.
+ Handle PPC_OPSHIFT_SH6.
+ * testsuite/gas/ppc/prefix-reloc.d: Update.
+ * testsuite/gas/ppc/simpshft.d: Update.
+ ld/
+ * testsuite/ld-powerpc/elfv2so.d: Update.
+ * testsuite/ld-powerpc/notoc.d: Update.
+ * testsuite/ld-powerpc/notoc3.d: Update.
+ * testsuite/ld-powerpc/tlsdesc2.d: Update.
+ * testsuite/ld-powerpc/tlsget.d: Update.
+ * testsuite/ld-powerpc/tlsget2.d: Update.
+ * testsuite/ld-powerpc/tlsopt5.d: Update.
+ * testsuite/ld-powerpc/tlsopt6.d: Update.
+
+2022-03-15 Tom Tromey <tom@tromey.com>
+
+ Do not capture updated 'pc' in add_local_symbols
+ Simon pointed out that commit 13835d88 ("Use function view when
+ iterating over block symbols") caused a regression. The bug is that
+ the new closure captures 'pc' by reference, but later code updates
+ this variable -- but the earlier code did not update the callback
+ structure with the new value.
+
+ This patch restores the old behavior by using a new varible name in an
+ inner scope.
+
+2022-03-15 Jose E. Marchesi <jose.marchesi@oracle.com>
+
+ gprofng: avoid using `fallthrough' attributes
+ gprofng didn't build with gcc 6.3 due to the usage of __attribute__
+ ((fallthrough)). This patch uses /* FALLTHROUGH */ instead.
+
+ 2022-03-15 Jose E. Marchesi <jose.marchesi@oracle.com>
+
+ * gprofng/src/gp-collect-app.cc (collect::check_args): Use
+ fallthrough comment instead of attribute.
+
+2022-03-15 Tom Tromey <tromey@adacore.com>
+
+ Fix bug in dwarf-mode.el
+ I noticed that, occasionally, dwarf-mode would think that the objdump
+ subprocess was still running after it had clearly exited. I managed
+ to reliably reproduce this today and learned that a process sentinel
+ is not guaranteed to be run with the current buffer set to the process
+ buffer. This patch fixes the problem.
+
+ I've bumped the version number of dwarf-mode.el to make it easier to
+ install for users who already have an earlier one installed.
+
+ I'm checking this in.
+
+ 2022-03-15 Tom Tromey <tromey@adacore.com>
+
+ * dwarf-mode.el: Now 1.7.
+ (dwarf--sentinel): Switch to the process buffer.
+
+2022-03-15 Andrew Burgess <aburgess@redhat.com>
+
+ gdb/testsuite: rename a proc and fix a typo
+ Rename a proc in gdb.mi/user-selected-context-sync.exp, I think the
+ old name was most likely a typo. The old name
+ match_re_or_ensure_not_output seems (to me) to imply we're in some way
+ checking that the regexp was not output. But that's not what we are
+ doing, we're checking either for the regexp, or for no output, hence
+ the new name match_re_or_ensure_no_output.
+
+ Additionally, I found a definite typo in one of the comments that I've
+ also fixed.
+
+ I also updated some test names. These tests (probably due to copy &
+ paste errors) has 'on MI' on their name, when they were actually
+ checking CLI output. For these test I changed the name to use 'on
+ CLI'.
+
+ There should be no change in what is tested after this commit.
+
+2022-03-15 Nick Clifton <nickc@redhat.com>
+
+ gprofng: Add a configure test for clock_gettime and a use of the test in getthrtime.c
+
+2022-03-15 H.J. Lu <hjl.tools@gmail.com>
+
+ gprofng: Don't generate gprofng.info in source
+ Add info-in-builddir to AUTOMAKE_OPTIONS.
+
+ PR gprof/28967
+ * doc/Makefile.am (AUTOMAKE_OPTIONS): Add info-in-builddir.
+ * doc/Makefile.in: Regenerate.
+
+2022-03-15 Tiezhu Yang <yangtiezhu@loongson.cn>
+
+ gdb: LoongArch: fix failed testcases in gdb.base/align-c.exp
+ When execute the following command on LoongArch:
+
+ make check-gdb TESTS="gdb.base/align-c.exp"
+
+ there exist some failed testcases:
+
+ ...
+ FAIL: gdb.base/align-c.exp: print _Alignof(struct align_pair_long_double_x_float)
+ FAIL: gdb.base/align-c.exp: print _Alignof(struct align_pair_long_double_x_double)
+ FAIL: gdb.base/align-c.exp: print _Alignof(struct align_pair_long_double_x_long_double)
+ ...
+
+ According to LoongArch ELF ABI specification [1], set the target data types
+ of floating-point to fix the above failed testcases.
+
+ [1] https://loongson.github.io/LoongArch-Documentation/LoongArch-ELF-ABI-EN.html
+
+2022-03-15 GDB Administrator <gdbadmin@sourceware.org>
+
+ Automatic date update in version.in
+
+2022-03-14 Andrew Burgess <aburgess@redhat.com>
+
+ gdb/python/mi: create MI commands using python
+ This commit allows a user to create custom MI commands using Python
+ similarly to what is possible for Python CLI commands.
+
+ A new subclass of mi_command is defined for Python MI commands,
+ mi_command_py. A new file, gdb/python/py-micmd.c contains the logic
+ for Python MI commands.
+
+ This commit is based on work linked too from this mailing list thread:
+
+ https://sourceware.org/pipermail/gdb/2021-November/049774.html
+
+ Which has also been previously posted to the mailing list here:
+
+ https://sourceware.org/pipermail/gdb-patches/2019-May/158010.html
+
+ And was recently reposted here:
+
+ https://sourceware.org/pipermail/gdb-patches/2022-January/185190.html
+
+ The version in this patch takes some core code from the previously
+ posted patches, but also has some significant differences, especially
+ after the feedback given here:
+
+ https://sourceware.org/pipermail/gdb-patches/2022-February/185767.html
+
+ A new MI command can be implemented in Python like this:
+
+ class echo_args(gdb.MICommand):
+ def invoke(self, args):
+ return { 'args': args }
+
+ echo_args("-echo-args")
+
+ The 'args' parameter (to the invoke method) is a list
+ containing (almost) all command line arguments passed to the MI
+ command (--thread and --frame are handled before the Python code is
+ called, and removed from the args list). This list can be empty if
+ the MI command was passed no arguments.
+
+ When used within gdb the above command produced output like this:
+
+ (gdb)
+ -echo-args a b c
+ ^done,args=["a","b","c"]
+ (gdb)
+
+ The 'invoke' method of the new command must return a dictionary. The
+ keys of this dictionary are then used as the field names in the mi
+ command output (e.g. 'args' in the above).
+
+ The values of the result returned by invoke can be dictionaries,
+ lists, iterators, or an object that can be converted to a string.
+ These are processed recursively to create the mi output. And so, this
+ is valid:
+
+ class new_command(gdb.MICommand):
+ def invoke(self,args):
+ return { 'result_one': { 'abc': 123, 'def': 'Hello' },
+ 'result_two': [ { 'a': 1, 'b': 2 },
+ { 'c': 3, 'd': 4 } ] }
+
+ Which produces output like:
+
+ (gdb)
+ -new-command
+ ^done,result_one={abc="123",def="Hello"},result_two=[{a="1",b="2"},{c="3",d="4"}]
+ (gdb)
+
+ I have required that the fields names used in mi result output must
+ match the regexp: "^[a-zA-Z][-_a-zA-Z0-9]*$" (without the quotes).
+ This restriction was never written down anywhere before, but seems
+ sensible to me, and we can always loosen this rule later if it proves
+ to be a problem. Much harder to try and add a restriction later, once
+ people are already using the API.
+
+ What follows are some details about how this implementation differs
+ from the original patch that was posted to the mailing list.
+
+ In this patch, I have changed how the lifetime of the Python
+ gdb.MICommand objects is managed. In the original patch, these object
+ were kept alive by an owned reference within the mi_command_py object.
+ As such, the Python object would not be deleted until the
+ mi_command_py object itself was deleted.
+
+ This caused a problem, the mi_command_py were held in the global mi
+ command table (in mi/mi-cmds.c), which, as a global, was not cleared
+ until program shutdown. By this point the Python interpreter has
+ already been shutdown. Attempting to delete the mi_command_py object
+ at this point was causing GDB to try and invoke Python code after
+ finalising the Python interpreter, and we would crash.
+
+ To work around this problem, the original patch added code in
+ python/python.c that would search the mi command table, and delete the
+ mi_command_py objects before the Python environment was finalised.
+
+ In contrast, in this patch, I have added a new global dictionary to
+ the gdb module, gdb._mi_commands. We already have several such global
+ data stores related to pretty printers, and frame unwinders.
+
+ The MICommand objects are placed into the new gdb.mi_commands
+ dictionary, and it is this reference that keeps the objects alive.
+ When GDB's Python interpreter is shut down gdb._mi_commands is deleted,
+ and any MICommand objects within it are deleted at this point.
+
+ This change avoids having to make the mi_cmd_table global, and walk
+ over it from within GDB's python related code.
+
+ This patch handles command redefinition entirely within GDB's python
+ code, though this does impose one small restriction which is not
+ present in the original code (detailed below), I don't think this is a
+ big issue. However, the original patch relied on being able to
+ finish executing the mi_command::do_invoke member function after the
+ mi_command object had been deleted. Though continuing to execute a
+ member function after an object is deleted is well defined, it is
+ also (IMHO) risky, its too easy for someone to later add a use of the
+ object without realising that the object might sometimes, have been
+ deleted. The new patch avoids this issue.
+
+ The one restriction that is added to avoid this, is that an MICommand
+ object can't be reinitialised with a different command name, so:
+
+ (gdb) python cmd = MyMICommand("-abc")
+ (gdb) python cmd.__init__("-def")
+ can't reinitialize object with a different command name
+
+ This feels like a pretty weird edge case, and I'm happy to live with
+ this restriction.
+
+ I have also changed how the memory is managed for the command name.
+ In the most recently posted patch series, the command name is moved
+ into a subclass of mi_command, the python mi_command_py, which
+ inherits from mi_command is then free to use a smart pointer to manage
+ the memory for the name.
+
+ In this patch, I leave the mi_command class unchanged, and instead
+ hold the memory for the name within the Python object, as the lifetime
+ of the Python object always exceeds the c++ object stored in the
+ mi_cmd_table. This adds a little more complexity in py-micmd.c, but
+ leaves the mi_command class nice and simple.
+
+ Next, this patch adds some extra functionality, there's a
+ MICommand.name read-only attribute containing the name of the command,
+ and a read-write MICommand.installed attribute that can be used to
+ install (make the command available for use) and uninstall (remove the
+ command from the mi_cmd_table so it can't be used) the command. This
+ attribute will be automatically updated if a second command replaces
+ an earlier command.
+
+ This patch adds additional error handling, and makes more use the
+ gdbpy_handle_exception function.
+
+ Co-Authored-By: Jan Vrany <jan.vrany@labware.com>
+
+2022-03-14 Andrew Burgess <aburgess@redhat.com>
+
+ gdb/gdbarch: compare some fields against 0 verify_gdbarch
+ After the previous commit, which removes the predicate function
+ gdbarch_register_type_p, I noticed that the gdbarch->register_type
+ field was not checked at in the verify_gdbarch function.
+
+ More than not being checked, the field wasn't mentioned at all.
+
+ I find this strange, I would expect that every field would at least be
+ mentioned - we already generate comments for some fields saying that
+ this field is _not_ being checked, so the fact that this field isn't
+ being checked looks (to me), like this field is somehow slipping
+ through the cracks.
+
+ The comment at the top of gdbarch-components.py tries to explain how
+ the validation is done. I didn't understand this comment completely,
+ but, I think this final sentence:
+
+ "Otherwise, the check is done against 0 (really NULL for function
+ pointers, but same idea)."
+
+ Means that, if non of the other cases apply, then the field should be
+ checked against 0, with 0 indicating that the field is invalid (was
+ not set by the tdep code). However, this is clearly not being done.
+
+ Looking in gdbarch.py at the code to generate verify_gdbarch we do
+ find that there is a case that is not handled, the case where the
+ 'invalid' field is set true True, but non of the other cases apply.
+
+ In this commit I propose two changes:
+
+ 1. Handle the case where the 'invalid' field of a property is set to
+ True, this should perform a check for the field of gdbarch still
+ being set to 0, and
+
+ 2. If the if/else series that generates verify_gdbarch doesn't handle
+ a property then we should raise an exception. This means that if a
+ property is added which isn't handled, we should no longer silently
+ ignore it.
+
+ After doing this, I re-generated the gdbarch files and saw that the
+ following gdbarch fields now had new validation checks:
+
+ register_type
+ believe_pcc_promotion
+ register_to_value
+ value_to_register
+ frame_red_zone_size
+ displaced_step_restore_all_in_ptid
+ solib_symbols_extension
+
+ Looking at how these are currently set in the various -tdep.c files, I
+ believe the only one of these that is required to be set for all
+ architectures is the register_type field.
+
+ And so, for all of the other fields, I've changed the property
+ definition on gdbarch-components.py, setting the 'invalid' field to
+ False.
+
+ Now, after re-generation, the register_type field is checked against
+ 0, thus an architecture that doesn't set_gdbarch_register_type will
+ now fail during validation. For all the other fields we skip the
+ validation, in which case, it is find for an architecture to not set
+ this field.
+
+ My expectation is that there should be no user visible changes after
+ this commit. Certainly for all fields except register_type, all I've
+ really done is cause some extra comments to be generated, so I think
+ that's clearly fine.
+
+ For the register_type field, my claim is that any architecture that
+ didn't provide this would fail when creating its register cache, and I
+ couldn't spot an architecture that doesn't provide this hook. As
+ such, I think this change should be fine too.
+
+2022-03-14 Andrew Burgess <aburgess@redhat.com>
+
+ gdb/gdbarch: remove the predicate function for gdbarch_register_type
+ I don't believe that the gdbarch_register_type_p predicate is called
+ anywhere in GDB, and the gdbarch_register_type function is called
+ without checking the gdbarch_register_type_p predicate function
+ everywhere it is used, for example in
+ init_regcache_descr (regcache.c).
+
+ My claim is that the gdbarch_register_type function is required for
+ every architecture, and GDB will not work if this function is not
+ supplied.
+
+ And so, in this commit, I remove the 'predicate=True' from
+ gdbarch-components.py for the 'register_type' field, and regenerate
+ the gdbarch files.
+
+ There should be no user visible changes after this commit.
+
+2022-03-14 Patrick Monnerat <patrick@monnerat.net>
+
+ Replace deprecated_target_wait_hook by observers
+ Commit b60cea7 (Make target_wait options use enum flags) broke
+ deprecated_target_wait_hook usage: there's a commit comment telling
+ this hook has not been converted.
+
+ Rather than trying to mend it, this patch replaces the hook by two
+ target_wait observers:
+
+ target_pre_wait (ptid_t ptid)
+ target_post_wait (ptid_t event_ptid)
+
+ Upon target_wait entry, target_pre_wait is notified with the ptid
+ passed to target_wait. Upon exit, target_post_wait is notified with
+ the event ptid returned by target_wait. Should an exception occur,
+ event_ptid is null_ptid.
+
+ This change benefits to Insight (out-of-tree): there's no real use of the
+ late hook in gdb itself.
+
+2022-03-14 Tom Tromey <tromey@adacore.com>
+
+ Correctly print subrange types in generic_value_print
+ I noticed that generic_value_print assumes that a subrange type is
+ always a subrange of an integer type. However, this isn't necessarily
+ the case. In Ada, for example, one has subranges of character and
+ enumeration types.
+
+ This code isn't often exercised, I think, because languages with real
+ subrange types tend to implement their own printers. However, it
+ still seemed worth fixing.
+
+2022-03-14 Luis Machado <luis.machado@arm.com>
+
+ [aarch64/arm] Properly extract the return value returned in memory
+ When running gdb.cp/non-trivial-retval.exp, the following shows up for
+ both aarch64-linux and armhf-linux:
+
+ Breakpoint 3, f1 (i1=23, i2=100) at src/gdb/testsuite/gdb.cp/non-trivial-retval.cc:35
+ 35 A a;
+ (gdb) finish
+ Run till exit from #0 f1 (i1=23, i2=100) at src/gdb/testsuite/gdb.cp/non-trivial-retval.cc:35
+ main () at /src/gdb/testsuite/gdb.cp/non-trivial-retval.cc:163
+ 163 B b = f2 (i1, i2);
+ Value returned is $6 = {a = -11952}
+ (gdb)
+
+ The return value should be {a = 123} instead. This happens because the
+ backends don't extract the return value from the correct location. GDB should
+ fetch a pointer to the memory location from X8 for aarch64 and r0 for armhf.
+
+ With the patch, gdb.cp/non-trivial-retval.exp has full passes on
+ aarch64-linux and armhf-linux on Ubuntu 20.04/18.04.
+
+ The problem only shows up with the "finish" command. The "call" command
+ works correctly and displays the correct return value.
+
+ This is also related to PR gdb/28681
+ (https://sourceware.org/bugzilla/show_bug.cgi?id=28681) and fixes FAIL's in
+ gdb.ada/mi_var_array.exp.
+
+ A new testcase is provided, and it exercises GDB's ability to "finish" a
+ function that returns a large struct (> 16 bytes) and display the
+ contents of this struct correctly. This has always been incorrect for
+ these backends, but no testcase exercised this particular scenario.
+
+2022-03-14 GDB Administrator <gdbadmin@sourceware.org>
+
+ Automatic date update in version.in
+
+2022-03-13 Alan Modra <amodra@gmail.com>
+
+ PR28959, obdump doesn't disassemble mftb instruction
+ Without a -M cpu option given, powerpc objdump defaults currently to
+ -Mpower10 but -Many is also given. Commit 1ff6a3b8e562 regressed
+ -Many disassembly of instructions that are encoded differently
+ depending on cpu, such as mftb which has pre- and post-power4
+ encodings.
+
+ PR 28959
+ * ppc-dis.c (lookup_powerpc): Revert 2021-05-28 change. Instead
+ only look at deprecated PPC_OPCODE_RAW bit when -Many.
+
+2022-03-13 GDB Administrator <gdbadmin@sourceware.org>
+
+ Automatic date update in version.in
+
+2022-03-12 Tom Tromey <tom@tromey.com>
+
+ Relax regexp in gdb.rust/unsized.exp
+ With nightly rustc, gdb.rust/unsized.exp fails:
+
+ (gdb) ptype *us
+ Structure has no component named operator*.
+
+ rustc changed to emit a bit more debug info for unsized types.
+ Because the original test is just to make sure that ptype of an
+ unsized array looks right, this patch relaxes the regexp and changes
+ the expression. I think this keeps the original test meaning, but
+ also works with nightly. I also tested stable and 1.48.
+
+2022-03-12 GDB Administrator <gdbadmin@sourceware.org>
+
+ Automatic date update in version.in
+
+2022-03-11 Tom Tromey <tromey@adacore.com>
+
+ Avoid crash with cross-linux core file
+ An internal test case creates a core file using gcore, then restarts
+ gdb with that core. When run with a cross-linux gdb (in this case,
+ x86-64 host with ppc64-linux target), the test fails:
+
+ | (gdb) core core
+ | [New LWP 18437]
+ | warning: `/lib64/libc.so.6': Shared library architecture unknown is not compatible with target architecture powerpc:common64.
+ | warning: Could not load shared library symbols for /lib64/ld64.so.1.
+ | Do you need "set solib-search-path" or "set sysroot"?
+ | ../../src/gdb/gdbarch.c:3388: internal-error: int gdbarch_elf_make_msymbol_special_p(gdbarch*): Assertion `gdbarch != NULL' failed.
+ | A problem internal to GDB has been detected,
+ | further debugging may prove unreliable.
+ | Quit this debugging session? (y or n) y
+
+ What's happening here is that the core file lists some shared
+ libraries. These aren't available via the solib search path, and so
+ gdb finds the local (x86-64) libraries. This is not ideal, but on the
+ other hand, it is what was asked for -- while the test does set
+ solib-search-path, it does not set the sysroot.
+
+ But, because gdb isn't configured to handle these libraries, it
+ crashes.
+
+ It seems to me that it's better to avoid the crash by having
+ solib_bfd_open fail in the case where a library is incompatible. That
+ is what this patch does. Now it looks like:
+
+ | [New LWP 15488]
+ | Error while mapping shared library sections:
+ | `/lib64/libc.so.6': Shared library architecture unknown is not compatible with target architecture powerpc:common64.
+
+ ... and does not crash gdb.
+
+ I don't have a good setup for testing this using dejagnu, so I don't
+ know whether an existing gdb test covers this scenario.
+
+2022-03-11 Andrew Burgess <aburgess@redhat.com>
+
+ gdb/testsuite: remove duplicates from gdb.base/stap-probe.exp
+ Remove the duplicate test names from gdb.base/stap-probe.exp, this is
+ done by actually passing a unique test name in a couple of
+ places (rather than using the command as the test name), and in
+ another couple of places, a test has a duplicate name due to a cut &
+ paste error, which I've fixed.
+
+ There's no change in what is actually being tested after this commit.
+
+2022-03-11 Vladimir Mezentsev <vladimir.mezentsev@oracle.com>
+
+ gprofng: a new GNU profiler
+ top-level
+ * Makefile.def: Add gprofng module.
+ * configure.ac: Add --enable-gprofng option.
+ * src-release.sh: Add gprofng.
+ * Makefile.in: Regenerate.
+ * configure: Regenerate.
+ * gprofng: New directory.
+
+ binutils
+ * MAINTAINERS: Add gprofng maintainer.
+ * README-how-to-make-a-release: Add gprofng.
+
+ include.
+ * collectorAPI.h: New file.
+ * libcollector.h: New file.
+ * libfcollector.h: New file.
+
+2022-03-11 GDB Administrator <gdbadmin@sourceware.org>
+
+ Automatic date update in version.in
+
+2022-03-10 Aaron Merey <amerey@redhat.com>
+
+ gdb/auto-load: Remove repeating "auto-load" from debug message
+ Remove "auto-load:" from a format string passed to auto_load_debug_printf.
+ It is unnecessary since this function will prefix the string with "[auto-load]"
+ when printing it.
+
+2022-03-10 Tom Tromey <tromey@adacore.com>
+
+ Change how "print/x" displays floating-point value
+ Currently, "print/x" will display a floating-point value by first
+ casting it to an integer type. This yields weird results like:
+
+ (gdb) print/x 1.5
+ $1 = 0x1
+
+ This has confused users multiple times -- see PR gdb/16242, where
+ there are several dups. I've also seen some confusion from this
+ internally at AdaCore.
+
+ The manual says:
+
+ 'x'
+ Regard the bits of the value as an integer, and print the integer
+ in hexadecimal.
+
+ ... which seems more useful. So, perhaps what happened is that this
+ was incorrectly implemented (or maybe correctly implemented and then
+ regressed, as there don't seem to be any tests).
+
+ This patch fixes the bug.
+
+ There was a previous discussion where we agreed to preserve the old
+ behavior:
+
+ https://sourceware.org/legacy-ml/gdb-patches/2017-06/msg00314.html
+
+ However, I think it makes more sense to follow the manual.
+
+ Bug: https://sourceware.org/bugzilla/show_bug.cgi?id=16242
+
+2022-03-10 Tom Tromey <tromey@adacore.com>
+
+ Simplify the ui-out progress API
+ I noticed that 'progress' is a method on ui-out, but it seems to me
+ that it would be better if the only API were via the progress_meter
+ class. This patch makes this change, changing progress to be a method
+ on the meter itself.
+
+2022-03-10 Andrew Burgess <aburgess@redhat.com>
+
+ gdb/gdbarch: fix typo in gdbarch-components.py
+ Fixes a minor typo, in a comment, in the gdbarch-components.py script.
+
+ There should be no user visible changes after this commit.
+
+2022-03-10 Lancelot SIX <lancelot.six@amd.com>
+
+ Process exit status is leader exit status testcase
+ This adds a multi-threaded testcase that has all threads in the
+ process exit with a different exit code, and ensures that GDB reports
+ the thread group leader's exit status as the whole-process exit
+ status. Before this set of patches, this would randomly report the
+ exit code of some other thread, and thus fail.
+
+ Tested on Linux-x86_64, native and gdbserver.
+
+ Co-Authored-By: Pedro Alves <pedro@palves.net>
+ Change-Id: I30cba2ff4576fb01b5169cc72667f3268d919557
+
+2022-03-10 Pedro Alves <pedro@palves.net>
+
+ Re-add zombie leader on exit, gdbserver/linux
+ Same as the previous patch, but for GDBserver.
+
+ In summary, the current zombie leader detection code in linux-low.cc
+ has a race -- if a multi-threaded inferior exits just before
+ check_zombie_leaders finds that the leader is now zombie via checking
+ /proc/PID/status, check_zombie_leaders deletes the leader, assuming we
+ won't get an event for that exit (which we won't in some scenarios,
+ but not in this one), which is a false-positive scenario, where the
+ whole process is simply exiting. Later when we see the last LWP in
+ our list exit, we report that LWP's exit status as exit code, even
+ though for the (real) parent process, the exit code that counts is the
+ child's leader thread's exit code.
+
+ Like for GDB, the solution here is to:
+
+ - only report whole-process exit events for the leader.
+ - re-add the leader back to the LWP list when we finally see it
+ exit.
+
+ Change-Id: Id2d7bbb51a415534e1294fff1d555b7ecaa87f1d
+
+2022-03-10 Pedro Alves <pedro@palves.net>
+
+ Re-add zombie leader on exit, gdb/linux
+ The current zombie leader detection code in linux-nat.c has a race --
+ if a multi-threaded inferior exits just before check_zombie_leaders
+ finds that the leader is now zombie via checking /proc/PID/status,
+ check_zombie_leaders deletes the leader, assuming we won't get an
+ event for that exit (which we won't in some scenarios, but not in this
+ one). That might seem mostly harmless, but it has some downsides:
+
+ - later when we continue pulling events out of the kernel, we will
+ collect the exit event of the non-leader threads, and once we see
+ the last lwp in our list exit, we return _that_ lwp's exit code as
+ whole-process exit code to infrun, instead of the leader's exit
+ code.
+
+ - this can cause a hang in stop_all_threads in infrun.c. Say there
+ are 2 threads in the process. stop_all_threads stops each of those
+ threads, and then waits for two stop or exit events, one for each
+ thread. If the whole process exits, and check_zombie_leaders hits
+ the false-positive case, linux-nat.c will only return one event to
+ GDB (the whole-process exit returned when we see the last thread,
+ the non-leader thread, exit), making stop_all_threads hang forever
+ waiting for a second event that will never come.
+
+ However, in this false-positive scenario, where the whole process is
+ exiting, as opposed to just the leader (with pthread_exit(), for
+ example), we _will_ get an exit event shortly for the leader, after we
+ collect the exit event of all the other non-leader threads. Or put
+ another way, we _always_ get an event for the leader after we see it
+ become zombie.
+
+ I tried a number of approaches to fix this:
+
+ #1 - My first thought to address the race was to make GDB always
+ report the whole-process exit status for the leader thread, not for
+ whatever is the last lwp in the list. We _always_ get a final exit
+ (or exec) event for the leader, and when the race triggers, we're not
+ collecting it.
+
+ #2 - My second thought was to try to plug the race in the first place.
+
+ I thought of making GDB call waitpid/WNOHANG for all non-leader
+ threads immediately when the zombie leader is detected, assuming there
+ would be an exit event pending for each of them waiting to be
+ collected. Turns out that that doesn't work -- you can see the leader
+ become zombie _before_ the kernel kills all other threads. Waitpid in
+ that small time window returns 0, indicating no-event. Thankfully we
+ hit that race window all the time, which avoided trading one race for
+ another. Looking at the non-leader thread's status in /proc doesn't
+ help either, the threads are still in running state for a bit, for the
+ same reason.
+
+ #3 - My next attempt, which seemed promising, was to synchronously
+ stop and wait for the stop for each of the non-leader threads. For
+ the scenario in question, this will collect all the exit statuses of
+ the non-leader threads. Then, if we are left with only the zombie
+ leader in the lwp list, it means we either have a normal while-process
+ exit or an exec, in which case we should not delete the leader. If
+ _only_ the leader exited, like in gdb.threads/leader-exit.exp, then
+ after pausing threads, we will still have at least one live non-leader
+ thread in the list, and so we delete the leader lwp. I got this
+ working and polished, and it was only after staring at the kernel code
+ to convince myself that this would really work (and it would, for the
+ scenario I considered), that I realized I had failed to account for
+ one scenario -- if any non-leader thread is _already_ stopped when
+ some thread triggers a group exit, like e.g., if you have some threads
+ stopped and then resume just one thread with scheduler-locking or
+ non-stop, and that thread exits the process. I also played with
+ PTRACE_EVENT_EXIT, see if it would help in any way to plug the race,
+ and I couldn't find a way that it would result in any practical
+ difference compared to looking at /proc/PID/status, with respect to
+ having a race.
+
+ So I concluded that there's no way to plug the race, we just have to
+ deal with it. Which means, going back to approach #1. That is the
+ approach taken by this patch.
+
+ Change-Id: I6309fd4727da8c67951f9cea557724b77e8ee979
+
+2022-03-10 Pedro Alves <pedro@palves.net>
+
+ gdbserver: Reindent check_zombie_leaders
+ This fixes the indentation of
+ linux_process_target::check_zombie_leaders, which will help with
+ keeping its comments in sync with the gdb/linux-nat.c counterpart.
+
+ Change-Id: I37332343bd80423d934249e3de2d04feefad1891
+
+2022-03-10 Pedro Alves <pedro@palves.net>
+
+ gdbserver: Reorganize linux_process_target::filter_event
+ Reorganize linux-low.cc:linux_process_target::filter_event such that
+ all the handling for events for LWPs not in the LWP list is together.
+ This helps make a following patch clearer. The comments and debug
+ messages have also been tweaked to have them synchronized with the GDB
+ counterpart.
+
+ Change-Id: If9019635f63a846607cfda44b454b4254a404019
+
+2022-03-10 Pedro Alves <pedro@palves.net>
+
+ gdb: Reorganize linux_nat_filter_event
+ Reorganize linux-nat.c:linux_nat_filter_event such that all the
+ handling for events for LWPs not in the LWP list is together. This
+ helps make a following patch clearer. The comments and debug messages
+ have also been tweaked - the end goal is to have them synchronized
+ with the gdbserver counterpart.
+
+ Change-Id: I8586d8dcd76d8bd3795145e3056fc660e3b2cd22
+
+2022-03-10 Pedro Alves <pedro@palves.net>
+
+ Fix gdb.threads/current-lwp-dead.exp race
+ If we make GDB report the process EXIT event for the leader thread, as
+ will be done in a latter patch of this series, then
+ gdb.threads/current-lwp-dead.exp starts failing:
+
+ (gdb) break fn_return
+ Breakpoint 2 at 0x5555555551b5: file /home/pedro/rocm/gdb/build/gdb/testsuite/../../../src/gdb/testsuite/gdb.threads/current-lwp-dead.c, line 45.
+ (gdb) continue
+ Continuing.
+ [New LWP 2138466]
+ [Inferior 1 (process 2138459) exited normally]
+ (gdb) FAIL: gdb.threads/current-lwp-dead.exp: continue to breakpoint: fn_return (the program exited)
+
+ The inferior exit reported is actually correct. The main thread has
+ indeed exited, and that's the thread that has the right exit code to
+ report to the user, as that's the exit code that is reported to the
+ program's parent. In this case, GDB managed to collect the exit code
+ for the leader thread before reaping the other thread, because in
+ reality, the testcase isn't creating standard threads, it is using raw
+ clone, and the new clones are put in their own thread group.
+
+ Fix it by making the main "thread" not exit until the scenario we're
+ exercising plays out. Also, run the program to completion for
+ completeness.
+
+ The original program really wanted the leader thread to exit before
+ the fn_return function was reached -- it was important that the
+ current thread as pointed by inferior_ptid was gone when infrun got
+ the breakpoint event. I've tweaked the testcase to ensure that that
+ condition is still held, though it is no longer the main thread that
+ exits. This required a bit of synchronization between the threads,
+ which required using CLONE_VM unconditionally. The #ifdef guards were
+ added as a fix for
+ https://sourceware.org/bugzilla/show_bug.cgi?id=11214, though I don't
+ think they were necessary because the program is not using TLS. If it
+ turns out they were necessary, we can link the testcase with "-z now"
+ instead, which was mentioned as an alternative workaround in that
+ Bugzilla.
+
+ Change-Id: I7be2f0da4c2fe8f80a60bdde5e6c623d8bd5a0aa
+
+2022-03-10 Pedro Alves <pedro@palves.net>
+
+ Fix gdb.threads/clone-new-thread-event.exp race
+ If we make GDB report the process EXIT event for the leader thread,
+ instead of whatever is the last thread in the LWP list, as will be
+ done in a latter patch of this series, then
+ gdb.threads/current-lwp-dead.exp starts failing:
+
+ (gdb) FAIL: gdb.threads/clone-new-thread-event.exp: catch SIGUSR1 (the program exited)
+
+ This is a testcase race -- the main thread does not wait for the
+ spawned clone "thread" to finish before exiting, so the main program
+ may exit before the second thread is scheduled and reports its
+ SIGUSR1. With the change to make GDB report the EXIT for the leader,
+ the race is 100% reproducible by adding a sleep(), like so:
+
+ --- c/gdb/testsuite/gdb.threads/clone-new-thread-event.c
+ +++ w/gdb/testsuite/gdb.threads/clone-new-thread-event.c
+ @@ -51,6 +51,7 @@ local_gettid (void)
+ static int
+ fn (void *unused)
+ {
+ + sleep (1);
+ tkill (local_gettid (), SIGUSR1);
+ return 0;
+ }
+
+ Resulting in:
+
+ Breakpoint 1, main (argc=1, argv=0x7fffffffd418) at gdb.threads/clone-new-thread-event.c:65
+ 65 stack = malloc (STACK_SIZE);
+ (gdb) continue
+ Continuing.
+ [New LWP 3715562]
+ [Inferior 1 (process 3715555) exited normally]
+ (gdb) FAIL: gdb.threads/clone-new-thread-event.exp: catch SIGUSR1 (the program exited)
+
+ That inferior exit reported is actually correct. The main thread has
+ indeed exited, and that's the thread that has the right exit code to
+ report to the user, as that's the exit code that is reported to the
+ program's parent. In this case, GDB managed to collect the exit code
+ for the leader thread before reaping the other thread, because in
+ reality, the testcase isn't creating standard threads, it is using raw
+ clone, and the new clones are put in their own thread group.
+
+ Fix it by making the main thread wait for the child to exit. Also,
+ run the program to completion for completeness.
+
+ Change-Id: I315cd3dc2b9e860395dcab9658341ea868d7a6bf
+
+2022-03-10 Pedro Alves <pedro@palves.net>
+
+ Fix gdbserver/linux target_waitstatus logging assert
+ Turning on debug output in gdbserver leads to an assertion failure if
+ gdbserver reports a non-signal event:
+
+ [threads] wait_1: LWP 3273770: extended event with waitstatus status->kind = EXECD, execd_pathname = gdb.threads/non-ldr-exc-1/non-ldr-exc-1
+ [threads] wait_1: Hit a non-gdbserver trap event.
+ ../../src/gdbserver/../gdb/target/waitstatus.h:365: A problem internal to GDBserver has been detected.
+ sig: Assertion `m_kind == TARGET_WAITKIND_STOPPED || m_kind == TARGET_WAITKIND_SIGNALLED' failed.
+
+ Fix it in the obvious way, using target_waitstatus::to_string(),
+ resulting in, for example:
+
+ [threads] wait_1: ret = LWP 1542412.1542412, status->kind = STOPPED, sig = GDB_SIGNAL_TRAP
+
+ Change-Id: Ia4832f9b4fa39f4af67fcaf21fd4d909a285a645
+
+2022-03-10 Nick Clifton <nickc@redhat.com>
+
+ Add option to objdump/readelf to disable access to debuginfod servers.
+ * dwarf.c (use_debuginfod): New variable. Set to 1.
+ (load_separate_debug_info): Only call
+ debuginfod_fetch_separate_debug_info is use_debuginfod is true.
+ (dwarf_select_sections_by_names): Add do-not-use-debuginfod and
+ use-debuginfod options.
+ (dwarf_select_sections_by_letters): Add D and E options.
+ * dwarf.h (use_debuginfod): New extern.
+ * objdump.c (usage): Mention the new options.
+ * readelf.c (usage): Likewise.
+ * doc/binutils.texi: Document the new options.
+ * doc/debug-options.texi: Describe the new options.
+ * NEWS: Mention the new feature.
+ * testsuite/binutils-all/debuginfod.exp: Add tests of the new
+ options.
+
+2022-03-10 Alan Modra <amodra@gmail.com>
+
+ Re: ld: Add a before_plugin_all_symbols_read hook
+ * testsuite/ld-plugin/pr28849.d: Adjust for powerpc64 function
+ descriptors.
+
+2022-03-10 H.J. Lu <hjl.tools@gmail.com>
+
+ ld: Add a before_plugin_all_symbols_read hook
+ Add a before_plugin_all_symbols_read hook to load symbol references from
+ DT_NEEDED entries, included from --copy-dt-needed-entries, before reading
+ plugin symbols to properly resolve plugin symbol references.
+
+ bfd/
+
+ PR ld/28849
+ * elf-bfd.h (elf_link_hash_table): Add handling_dt_needed.
+ * elflink.c (_bfd_elf_merge_symbol): Don't set non_ir_ref_dynamic
+ before plugin 'all symbols read' hook is called.
+
+ ld/
+
+ PR ld/28849
+ * ldelf.c (ldelf_handle_dt_needed): New function.
+ (ldelf_before_plugin_all_symbols_read): Likewise.
+ (ldelf_after_open): Call ldelf_handle_dt_needed.
+ * ldelf.h (ldelf_before_plugin_all_symbols_read): New.
+ * ldemul.c (ldemul_before_plugin_all_symbols_read): Likewise.
+ * ldemul.h (ldemul_before_plugin_all_symbols_read): Likewise.
+ (ld_emulation_xfer_struct): Add before_plugin_all_symbols_read.
+ * ldlang.c (lang_process): Call
+ ldemul_before_plugin_all_symbols_read before calling
+ plugin_call_all_symbols_read.
+ * emultempl/elf.em
+ (gld${EMULATION_NAME}_before_plugin_all_symbols_read): New.
+ (LDEMUL_BEFORE_PLUGIN_ALL_SYMBOLS_READ): New.
+ * emultempl/emulation.em (ld_${EMULATION_NAME}_emulation):
+ Initialize the before_plugin_all_symbols_read field.
+ * testsuite/ld-plugin/lto.exp: Run PR ld/28849 tests.
+ * testsuite/ld-plugin/pr28849.d: New file.
+ * testsuite/ld-plugin/pr28849a.c: Likewise.
+ * testsuite/ld-plugin/pr28849b.c: Likewise.
+
+2022-03-10 GDB Administrator <gdbadmin@sourceware.org>
+
+ Automatic date update in version.in
+
+2022-03-09 Hans-Peter Nilsson <hp@axis.com>
+
+ toplevel: Makefile.def: Make configure-sim depend on all-readline
+ Without this, a "make all-sim" without the equivalent of
+ libreadline-dev installed on the build system, won't
+ properly pick up the in-tree readline build, and you'll see:
+
+ mkdir -p -- ./sim
+ Configuring in ./sim
+ configure: creating cache ./config.cache
+ checking build system type... x86_64-pc-linux-gnu
+ checking host system type... x86_64-pc-linux-gnu
+ checking target system type... cris-axis-elf
+ checking for x86_64-pc-linux-gnu-gcc... gcc
+ checking whether the C compiler works... yes
+ ...
+ checking for library containing tgetent... -ltermcap
+ checking for readline in -lreadline... no
+ configure: error: the required "readline" library is missing
+ make[1]: *** [Makefile:11188: configure-sim] Error 1
+ make[1]: Leaving directory '/home/hp/sim/b'
+
+ The sim dependency on readline is apparently (nominally)
+ valid as there's a readline call in sim/erc32/sis.c.
+
+ 2022-02-21 Hans-Peter Nilsson <hp@axis.com>
+
+ * Makefile.def (dependencies): Make configure-sim depend on
+ all-readline.
+
+2022-03-09 Maciej W. Rozycki <macro@embecosm.com>
+
+ GDB/testsuite: Fix a "displayed" typo in gdb.base/default.exp
+ Fix a typo, s/dislayed/displayed/ in default.exp at the top level.
+
+ GDB/testsuite: Remove a stray backslash from gdb.base/settings.exp
+ Remove a stray trailing backslash from `test-integer' in settings.exp.
+ It is harmless as only white space follows in the next line before the
+ closing brace, so it merely swallows the newline character, but it may
+ look confusing to the reader.
+
+2022-03-09 Christina Schimpe <christina.schimpe@intel.com> (tiny change)
+
+ * gdb/doc/gdb.texinfo (Requirements): Fix a typo.
+
+2022-03-09 Alan Modra <amodra@gmail.com>
+
+ Constant fold view increment expressions
+ The idea here is to replace expressions like v + 1 + 1 + 1 with v + 3.
+
+ * dwarf2dbg.c (set_or_check_view): Remove useless assertion.
+ Resolve multiple view increments.
+ * testsuite/gas/elf/dwarf2-18.d: Don't xfail mep.
+
+2022-03-09 Alan Modra <amodra@gmail.com>
+
+ Reduce duplicated symbol_clone_if_forward_ref work
+ * symbol.c (struct symbol_flags): Add forward_resolved.
+ (symbol_entry_find): Update needle initialisation.
+ (symbol_clone_if_forward_ref): Do no work when forward_resolved
+ is already set. Set forward_resolved.
+
+2022-03-09 Aaron Merey <amerey@redhat.com>
+
+ gdb: Try searching for auto-load script using .gnu_debuglink
+ If an auto-load script cannot be found and objfile is a separate
+ debuginfo whose filename does not match the name found in the parent
+ file's .gnu_debuglink section, then repeat the search using the
+ parent's filename where the last component is replaced with the
+ .gnu_debuglink name.
+
+ For example if the parent's filename is "/usr/lib/libxyz.so" and the
+ name in its .gnu_debuglink section is "libxyz.so.debug", then
+ if no auto-load script is otherwise found the search will be
+ repeated with the filename "/usr/lib/libxyz.so.debug".
+
+ This helps gdb locate auto-load scripts when debuginfo files do not have
+ the expected filename, such as when they are aquired from debuginfod.
+
+2022-03-09 GDB Administrator <gdbadmin@sourceware.org>
+
+ Automatic date update in version.in
+
+2022-03-08 Aaron Merey <amerey@redhat.com>
+
+ PR gdb/27876 - debuginfod-downloaded source files don't pass proper fullname across mi / (gdb)info source
+ Source files downloaded from debuginfod currently use their original DWARF
+ filename as their "fullname". This causes a mismatch between the fullname
+ and the actual location of the source file in the debuginfod client cache.
+
+ MI consumers such as VSCode will fail to open debuginfod-downloaded
+ source files due to this. Also 'info source' will fail to include the
+ true paths of these files.
+
+ To fix this, use the debuginfod cache path as the fullname for debuginfod-
+ downloaded source files.
+
+2022-03-08 Jan Vrany <jan.vrany@labware.com>
+
+ gdb/mi: preserve user selected thread and frame when invoking MI commands
+ Fix for PR gdb/20684. When invoking MI commands with --thread and/or
+ --frame, the user selected thread and frame was not preserved:
+
+ (gdb)
+ info thread
+ &"info thread\n"
+ ~" Id Target Id Frame \n"
+ ~"* 1 Thread 0x7ffff7c30740 (LWP 19302) \"user-selected-c\" main () at /home/uuu/gdb/gdb/testsuite/gdb.mi/user-selected-context-sync.c:60\n"
+ ~" 2 Thread 0x7ffff7c2f700 (LWP 19306) \"user-selected-c\" child_sub_function () at /home/uuu/gdb/gdb/testsuite/gdb.mi/user-selected-context-sync.c:30\n"
+ ~" 3 Thread 0x7ffff742e700 (LWP 19307) \"user-selected-c\" child_sub_function () at /home/uuu/gdb/gdb/testsuite/gdb.mi/user-selected-context-sync.c:30\n"
+ ^done
+ (gdb)
+ info frame
+ &"info frame\n"
+ ~"Stack level 0, frame at 0x7fffffffdf90:\n"
+ ~" rip = 0x555555555207 in main (/home/uuu/gdb/gdb/testsuite/gdb.mi/user-selected-context-sync.c:60); saved rip = 0x7ffff7c5709b\n"
+ ~" source language c.\n"
+ ~" Arglist at 0x7fffffffdf80, args: \n"
+ ~" Locals at 0x7fffffffdf80, Previous frame's sp is 0x7fffffffdf90\n"
+ ~" Saved registers:\n "
+ ~" rbp at 0x7fffffffdf80, rip at 0x7fffffffdf88\n"
+ ^done
+ (gdb)
+ -stack-info-depth --thread 3
+ ^done,depth="4"
+ (gdb)
+ info thread
+ &"info thread\n"
+ ~" Id Target Id Frame \n"
+ ~" 1 Thread 0x7ffff7c30740 (LWP 19302) \"user-selected-c\" main () at /home/uuu/gdb/gdb/testsuite/gdb.mi/user-selected-context-sync.c:60\n"
+ ~" 2 Thread 0x7ffff7c2f700 (LWP 19306) \"user-selected-c\" child_sub_function () at /home/uuu/gdb/gdb/testsuite/gdb.mi/user-selected-context-sync.c:30\n"
+ ~"* 3 Thread 0x7ffff742e700 (LWP 19307) \"user-selected-c\" child_sub_function () at /home/uuu/gdb/gdb/testsuite/gdb.mi/user-selected-context-sync.c:30\n"
+ ^done
+ (gdb)
+ info frame
+ &"info frame\n"
+ ~"Stack level 0, frame at 0x7ffff742dee0:\n"
+ ~" rip = 0x555555555169 in child_sub_function (/home/uuu/gdb/gdb/testsuite/gdb.mi/user-selected-context-sync.c:30); saved rip = 0x555555555188\n"
+ ~" called by frame at 0x7ffff742df00\n"
+ ~" source language c.\n"
+ ~" Arglist at 0x7ffff742ded0, args: \n"
+ ~" Locals at 0x7ffff742ded0, Previous frame's sp is 0x7ffff742dee0\n"
+ ~" Saved registers:\n "
+ ~" rbp at 0x7ffff742ded0, rip at 0x7ffff742ded8\n"
+ ^done
+ (gdb)
+
+ This caused problems for frontends that provide access to CLI because UI
+ may silently change the context for CLI commands (as demonstrated above).
+
+ This commit fixes the problem by restoring thread and frame in
+ mi_cmd_execute (). With this change, there are only two GDB/MI commands
+ that can change user selected context: -thread-select and -stack-select-frame.
+ This allows us to remove all and rather complicated logic of notifying
+ about user selected context change from mi_execute_command (), leaving it
+ to these two commands themselves to notify.
+
+ Bug: https://sourceware.org/bugzilla/show_bug.cgi?id=20684
+
+2022-03-08 Andrew Burgess <aburgess@redhat.com>
+
+ gdb: announce upcoming removal of Python 2 support from gdb
+ As has been discussed here:
+
+ https://sourceware.org/pipermail/gdb-patches/2022-January/184910.html
+
+ Python 2 support will be removed from GDB after GDB 12 has branched.
+ This commit places an entry in the NEWS file to inform users of this
+ decision.
+
+2022-03-08 GDB Administrator <gdbadmin@sourceware.org>
+
+ Automatic date update in version.in
+
+2022-03-07 Andrew Burgess <aburgess@redhat.com>
+
+ gdb/testsuite: add new test for comparing char types in Python
+ There's an interesting property of the 'char' type in C and C++, the
+ three types 'char', 'unsigned char', and 'signed char', are all
+ considered distinct.
+
+ In contrast, and 'int' is signed by default, and so 'int' and 'signed
+ int' are considered the same type.
+
+ This commit adds a test to ensure that this edge case is visible to a
+ user from Python.
+
+ It is worth noting that for any particular compiler implementation (or
+ the flags a compiler was invoked with), a 'char' will be either signed
+ or unsigned; it has to be one or the other, and a user can access this
+ information by using the Type.is_signed property. However, for
+ something like function overload resolution, the 'char' type is
+ considered distinct from the signed and unsigned variants.
+
+ There's no change to GDB with this commit, this is just adding a new
+ test to guard some existing functionality.
+
+2022-03-07 Andrew Burgess <aburgess@redhat.com>
+
+ gdb/python: add Type.is_signed property
+ Add a new read-only property, Type.is_signed, which is True for signed
+ types, and False otherwise.
+
+ This property should only be read on types for which Type.is_scalar is
+ true, attempting to read this property for non-scalar types will raise
+ a ValueError.
+
+ I chose 'is_signed' rather than 'is_unsigned' in order to match the
+ existing Architecture.integer_type method, which takes a 'signed'
+ parameter. As far as I could find, that was the only existing
+ signed/unsigned selector in the Python API, so it seemed reasonable to
+ stay consistent.
+
+2022-03-07 Andrew Burgess <aburgess@redhat.com>
+
+ gdb/python: add Type.is_scalar property
+ Add a new read-only property which is True for scalar types,
+ otherwise, it's False.
+
+2022-03-07 Andrew Burgess <aburgess@redhat.com>
+
+ gdb/mi: add --no-connection to MI -add-inferior command
+ Following on from the previous commit, where the -add-inferior command
+ now uses the same connection as the current inferior, this commit adds
+ a --no-connection option to -add-inferior.
+
+ This new option matches the existing option of the same name for the
+ CLI version of add-inferior; the new inferior is created with no
+ connection.
+
+ I've added a new 'connection' field to the MI output of -add-inferior,
+ which includes the connection number and short name. I haven't
+ included the longer description field, this is the MI after all. My
+ expectation would be that if the frontend wanted to display all the
+ connection details then this would be looked up from 'info
+ connection' (or the MI equivalent if/when such a command is added).
+
+ The existing -add-inferior tests are updated, as are the docs.
+
+2022-03-07 Umair Sair <umair_sair@hotmail.com>
+
+ gdb/mi: fix regression in mi -add-inferior command
+ Prior to the multi-target support commit:
+
+ commit 5b6d1e4fa4fc6827c7b3f0e99ff120dfa14d65d2
+ Date: Fri Jan 10 20:06:08 2020 +0000
+
+ Multi-target support
+
+ When a new inferior was added using the MI -add-inferior command, the
+ new inferior would be using the same target as all the other
+ inferiors. This makes sense, GDB only supported a single target stack
+ at a time.
+
+ After the above commit, each inferior has its own target stack.
+
+ To maintain backward compatibility, for the CLI add-inferior command,
+ when a new inferior is added the above commit has the new inferior
+ inherit a copy of the target stack from the current inferior.
+
+ Unfortunately, this same backward compatibility is missing for the MI.
+
+ This commit fixes this oversight.
+
+ Now, when the -add-inferior MI command is used, the new inferior will
+ inherit a copy of the target stack from the current inferior.
+
+2022-03-07 Tom Tromey <tromey@adacore.com>
+
+ Deprecate dbx mode
+ GDB has a dbx emulation mode that adds a few aliases and helper
+ commands. This mode is barely documented and is very superficial
+ besides. I suspect it is rarely used, and I would like to propose
+ deprecating it for GDB 12, and then removing it in GDB 13.
+
+2022-03-07 Pedro Alves <pedro@palves.net>
+
+ Remove unnecessary inferior lookup in infrun:handle_one
+ infrun.c:handle_one calls find_inferior_ptid unnecessarily, since we
+ already have a thread pointer handy, and the thread has a pointer to
+ the inferior. This commit removes the unnecessary lookup.
+
+ Change-Id: I2ae18601dd75346c6c91068e9a4f9a6484fb3339
+
+2022-03-07 Tom Tromey <tromey@adacore.com>
+
+ Fix bug in ada_print_floating
+ ada_print_floating rewrites a floating-point string representation to
+ conform to Ada syntax. However, if you managed to get a floating
+ point error, you might see:
+
+ (gdb) print whatever
+ $2 = <invalid float valu.0e>
+
+ What's happening here is that ada_print_floating doesn't recognize
+ this error case, and proceeds to modify the error text.
+
+ This patch fixes this problem.
+
+2022-03-07 Tom Tromey <tromey@adacore.com>
+
+ Implement real literal extension for Ada
+ Sometimes it is convenient to be able to specify the exact bits of a
+ floating-point literal. For example, you may want to set a
+ floating-point register to a denormalized value, or to a particular
+ NaN.
+
+ In C, you can do this by combining the "{}" cast with an array
+ literal, like:
+
+ (gdb) p {double}{0x576488BDD2AE9FFE}
+ $1 = 9.8765449999999996e+112
+
+ This patch adds a somewhat similar idea to Ada. It extends the lexer
+ to allow "l" and "f" suffixes in a based literal. The "f" indicates a
+ floating-point literal, and the "l"s control the size of the
+ floating-point type.
+
+ Note that this differs from Ada's based real literals. I believe
+ those can also be used to control the bits of a floating-point value,
+ but they are a bit more cumbersome to use (simplest is binary but
+ that's also very lengthy). Also, these aren't implemented in GDB.
+
+ I chose not to allow this extension to work with based integer
+ literals with exponents. That didn't seem very useful.
+
+2022-03-07 Tom Tromey <tromey@adacore.com>
+
+ Fix Ada integer literals with exponents
+ While working on another patch, I noticed that Ada integer literals
+ with exponents did not work. For example, with one form you get an
+ error:
+
+ (gdb) print 8e2
+ Invalid digit `e' in based literal
+
+ And with another form you get an incorrect value:
+
+ (gdb) print 16#8#e2
+ $2 = 8
+
+ This patch fixes the bugs and adds tests.
+
+2022-03-07 Tom Tromey <tromey@adacore.com>
+
+ Fix gdb.ada/arrayptr.exp results
+ PR ada/28115 points out that gdb.ada/arrayptr.exp works with GNAT 12,
+ but fails with minimal encodings in earlier versions.
+
+ This patch updates the test to try to report the results correctly. I
+ tried this with the Fedora 34 system gcc (GCC 11) and with a GCC 12
+ built from git trunk sometime relatively recently.
+
+ Bug: https://sourceware.org/bugzilla/show_bug.cgi?id=28115
+
+2022-03-07 Tom Tromey <tromey@adacore.com>
+
+ Handle non-ASCII identifiers in Ada
+ Ada allows non-ASCII identifiers, and GNAT supports several such
+ encodings. This patch adds the corresponding support to gdb.
+
+ GNAT encodes non-ASCII characters using special symbol names.
+
+ For character sets like Latin-1, where all characters are a single
+ byte, it uses a "U" followed by the hex for the character. So, for
+ example, thorn would be encoded as "Ufe" (0xFE being lower case
+ thorn).
+
+ For wider characters, despite what the manual says (it claims
+ Shift-JIS and EUC can be used), in practice recent versions only
+ support Unicode. Here, characters in the base plane are represented
+ using "Wxxxx" and characters outside the base plane using
+ "WWxxxxxxxx".
+
+ GNAT has some further quirks here. Ada is case-insensitive, and GNAT
+ emits symbols that have been case-folded. For characters in ASCII,
+ and for all characters in non-Unicode character sets, lower case is
+ used. For Unicode, however, characters that fit in a single byte are
+ converted to lower case, but all others are converted to upper case.
+
+ Furthermore, there is a bug in GNAT where two symbols that differ only
+ in the case of "Y WITH DIAERESIS" (and potentially others, I did not
+ check exhaustively) can be used in one program. I chose to omit
+ handling this case from gdb, on the theory that it is hard to figure
+ out the logic, and anyway if the bug is ever fixed, we'll regret
+ having a heuristic.
+
+ This patch introduces a new "ada source-charset" setting. It defaults
+ to Latin-1, as that is GNAT's default. This setting controls how "U"
+ characters are decoded -- W/WW are always handled as UTF-32.
+
+ The ada_tag_name_from_tsd change is needed because this function will
+ read memory from the inferior and interpret it -- and this caused an
+ encoding failure on PPC when running a test that tries to read
+ uninitialized memory.
+
+ This patch implements its own UTF-32-based case folder. This avoids
+ host platform quirks, and is relatively simple. A short Python
+ program to generate the case-folding table is included. It simply
+ relies on whatever version of Unicode is used by the host Python,
+ which seems basically acceptable.
+
+ Test cases for UTF-8, Latin-1, and Latin-3 are included. This
+ exercises most of the new code paths, aside from Y WITH DIAERESIS as
+ noted above.
+
+2022-03-07 Tom Tromey <tromey@adacore.com>
+
+ Define HOST_UTF32 in charset.h
+ rust-parse.c has a #define for the host-specific UTF-32 charset name.
+ A later patch needs the same thing, so this patch moves the definition
+ to charset.h for easier reuse.
+
+2022-03-07 Tom Tromey <tromey@adacore.com>
+
+ Let phex and phex_nz handle sizeof_l==1
+ Currently, neither phex nor phex_nz handle sizeof_l==1 -- they let
+ this case fall through to the default case. However, a subsequent
+ patch in this series needs this case to work correctly.
+
+ I looked at all calls to these functions that pass a 1 for the
+ sizeof_l parameter. The only such case seems to be correct with this
+ change.
+
+2022-03-07 Tom Tromey <tromey@adacore.com>
+
+ Don't pre-size result string in ada_decode
+ Currently, ada_decode pre-sizes the output string, filling it with 'X'
+ characters. However, it's a bit simpler and more flexible to let
+ std::string do the work here, and simply append characters to the
+ string as we go. This turns out to be useful for a subsequent patch.
+
+ Simplify a regular expression in ada-lex.l
+ ada-lex.l uses "%option case-insensitive", so there is no need for
+ regular expressions to match upper case.
+
+2022-03-07 GDB Administrator <gdbadmin@sourceware.org>
+
+ Automatic date update in version.in
+
+2022-03-06 Maciej W. Rozycki <macro@orcam.me.uk>
+
+ MIPS/opcodes: Fix alias annotation for branch instructions
+ Correct issues with INSN2_ALIAS annotation for branch instructions:
+
+ - regular MIPS BEQZ/L and BNEZ/L assembly instructions are idioms for
+ BEQ/L and BNE/L respectively with the `rs' operand equal to $0,
+
+ - microMIPS 32-bit BEQZ and BNEZ assembly instructions are idioms for
+ BEQ and BNE respectively with the `rt' operand equal to $0,
+
+ - regular MIPS BAL assembly instruction is an idiom for architecture
+ levels of up to the MIPSr5 ISA and a machine instruction on its own
+ from the MIPSr6 ISA up.
+
+ Add missing annotation to BEQZ/L and BNEZ/L accordingly then and add a
+ new entry for BAL for the MIPSr6 ISA, correcting a disassembly bug:
+
+ $ mips-linux-gnu-objdump -m mips:isa64r6 -M no-aliases -d bal.o
+
+ bal.o: file format elf32-tradlittlemips
+
+ Disassembly of section .text:
+
+ 00000000 <foo>:
+ 0: 04110000 0x4110000
+ ...
+ $
+
+ Add test cases accordingly.
+
+ Parts for regular MIPS BEQZ/L and BNEZ/L instructions from Sagar Patel.
+
+ 2022-03-06 Maciej W. Rozycki <macro@orcam.me.uk>
+
+ binutils/
+ * testsuite/binutils-all/mips/mips1-branch-alias.d: New test.
+ * testsuite/binutils-all/mips/mips1-branch-noalias.d: New test.
+ * testsuite/binutils-all/mips/mips2-branch-alias.d: New test.
+ * testsuite/binutils-all/mips/mips2-branch-noalias.d: New test.
+ * testsuite/binutils-all/mips/mips32r6-branch-alias.d: New test.
+ * testsuite/binutils-all/mips/mips32r6-branch-noalias.d: New
+ test.
+ * testsuite/binutils-all/mips/micromips-branch-alias.d: New
+ test.
+ * testsuite/binutils-all/mips/micromips-branch-noalias.d: New
+ test.
+ * testsuite/binutils-all/mips/mips-branch-alias.s: New test
+ source.
+ * testsuite/binutils-all/mips/micromips-branch-alias.s: New test
+ source.
+ * testsuite/binutils-all/mips/mips.exp: Run the new tests.
+
+ 2022-03-06 Sagar Patel <sagarmp@cs.unc.edu>
+ Maciej W. Rozycki <macro@orcam.me.uk>
+
+ opcodes/
+ * mips-opc.c (mips_builtin_opcodes): Fix INSN2_ALIAS annotation
+ for "bal", "beqz", "beqzl", "bnez" and "bnezl" instructions.
+ * micromips-opc.c (micromips_opcodes): Likewise for "beqz" and
+ "bnez" instructions.
+
+2022-03-06 Tom Tromey <tom@tromey.com>
+
+ Use function view when iterating over block symbols
+ This changes iterate_over_block_local_vars and
+ iterate_over_block_arg_vars to take a gdb::function_view rather than a
+ function pointer and a user-data. In one spot, this allows us to
+ remove a helper structure and helper function. In another spot, this
+ looked more complicated, so I changed the helper function to be an
+ "operator()" -- also a simplification, just not as big.
+
+2022-03-06 Tom Tromey <tom@tromey.com>
+
+ Simplify hppa-tdep.c use of objfile_key
+ I happened to notice a couple of unnecessary casts in hppa-tdep.c, and
+ then I saw that the use of objfile_key could be simplified -- removing
+ some code and using the default deleter rather than noop_deleter.
+
+ Tested by rebuilding. Let me know what you think.
+
+2022-03-06 Simon Marchi <simon.marchi@polymtl.ca>
+
+ gdb: constify parameter of value_copy
+ In a following patch, I have a const value I want to copy using a
+ value_copy. However, value_copy takes a non-const source value, at the
+ moment. Change the paramter to be const,
+
+ If the source value is not lazy, we currently call
+ value_contents_all_raw, which calls allocate_value_contents, to get a
+ view on the contents. They both take a non-const value, that's a
+ problem. My first attempt at solving it was to add a const version of
+ value_contents_all_raw, make allocate_value_contents take a const value,
+ and either:
+
+ - make value::contents mutable
+ - make allocate_value_contents cast away the const
+
+ The idea being that allocating the value contents buffer does modify the
+ value at the bit level, but logically that doesn't change its state.
+
+ That was getting a bit complicated, so what I ended up doing is make
+ value_copy not call value_contents_all_raw. We know at this point that
+ the value is not lazy, so value::contents must have been allocate
+ already.
+
+ Change-Id: I3741ab362bce14315f712ec24064ccc17e3578d4
+
+2022-03-06 Simon Marchi <simon.marchi@polymtl.ca>
+
+ gdb: remove internalvar_funcs::destroy
+ No kind of internal var uses it remove it. This makes the transition to
+ using a variant easier, since we don't need to think about where this
+ should be called (in a destructor or not), if it can throw, etc.
+
+ Change-Id: Iebbc867d1ce6716480450d9790410d6684cbe4dd
+
+2022-03-06 GDB Administrator <gdbadmin@sourceware.org>
+
+ Automatic date update in version.in
+
+2022-03-05 GDB Administrator <gdbadmin@sourceware.org>
+
+ Automatic date update in version.in
+
+2022-03-04 Tom Tromey <tromey@adacore.com>
+
+ Mark vDSO as not a file
+ The vDSO objfile is not a real file, so mark it as such. I noticed
+ this because, when playing with debuginfod, I saw:
+
+ Downloading 0.01 MB separate debug info for /tmp/system-supplied DSO at 0x7ffff7fc9000
+
+ That "/tmp" is wrong -- it's just gdb's cwd. This patch corrects the
+ problem, resulting in:
+
+ Downloading 0.01 MB separate debug info for system-supplied DSO at 0x7ffff7fc9000
+
+ Regression tested on x86-64 Fedora 34.
+
+2022-03-04 Simon Marchi <simon.marchi@polymtl.ca>
+
+ binutils/readelf: fix indentation in process_dynamic_section
+ Clangd shows a warning about misleading indentation in this file, fix
+ it.
+
+ binutils/ChangeLog:
+
+ * readelf.c (process_dynamic_section): Fix indentation.
+
+ Change-Id: I43a7f4f4c75dd080af614222b980526f5debf297
+
+2022-03-04 Christina Schimpe <christina.schimpe@intel.com>
+
+ gdb: Use a typedef's scoped type name to identify local typedefs
+ GDB prints the wrong type for typedefs in case there is another typedef
+ available for the same raw type (gdb/16040). The reason is that the
+ current hashmap based substitution mechanism always compares the target
+ type of a typedef and not its scoped name.
+
+ The original output of GDB for a program like
+
+ ~~~~
+ namespace ns
+ {
+ typedef double scoped_double;
+ }
+
+ typedef double global_double;
+
+ class TypedefHolder
+ {
+ public:
+ double a;
+ ns::scoped_double b;
+ global_double c;
+
+ private:
+ typedef double class_double;
+ class_double d;
+
+ double method1(ns::scoped_double) { return 24.0; }
+ double method2(global_double) { return 24.0; }
+ };
+
+ int main()
+ {
+ TypedefHolder th;
+ return 0;
+ }
+ ~~~~
+
+ is
+ ~~~~
+
+ (gdb) b 27
+ Breakpoint 1 at 0x1131: file TypedefHolder.cc, line 27.
+ (gdb) r
+ Starting program: /tmp/typedefholder
+
+ Breakpoint 1, main () at TypedefHolder.cc:27
+ 27 return 0;
+ (gdb) ptype th
+ type = class TypedefHolder {
+ public:
+ class_double a;
+ class_double b;
+ class_double c;
+ private:
+ class_double d;
+
+ class_double method1(class_double);
+ class_double method2(class_double);
+
+ typedef double class_double;
+ }
+ ~~~~
+
+ Basically all attributes of a class which have the raw type "double" are
+ substituted by "class_double".
+
+ With the patch the output is the following
+
+ ~~~~
+ type = class TypedefHolder {
+ public:
+ double a;
+ ns::scoped_double b;
+ global_double c;
+ private:
+ class_double d;
+
+ double method1(ns::scoped_double);
+ double method2(global_double);
+
+ typedef double class_double;
+ }
+ ~~~~
+
+2022-03-04 Jan Beulich <jbeulich@suse.com>
+
+ RISC-V: make .insn actually work for 64-bit insns
+ Presently in this case, due to an undefined behavior shift, at least
+ with x86 cross builds I'm observing:
+
+ Error: value conflicts with instruction length `8,0x0000003f'
+
+ Eliminate the UB and extend the respective testcase.
+
+2022-03-04 Jan Beulich <jbeulich@suse.com>
+
+ x86: drop redundant x86-64-code16-2 test
+ The code16-2 test is already meaningless enough as a gas test, identical
+ to this one, and is run uniformly for all ELF targets anyway.
+
+2022-03-04 GDB Administrator <gdbadmin@sourceware.org>
+
+ Automatic date update in version.in
+
+2022-03-03 Roland McGrath <mcgrathr@google.com>
+
+ Fix typo in last change.
+
+2022-03-03 Roland McGrath <mcgrathr@google.com>
+
+ Avoid conflict with gnulib open/close macros.
+ On some systems, the gnulib configuration will decide to define open
+ and/or close as macros to replace the POSIX C functions. This
+ interferes with using those names in C++ class or namespace scopes.
+
+ gdbsupport/
+ * event-pipe.cc (event_pipe::open): Renamed to ...
+ (event_pipe::open_pipe): ... this.
+ (event_pipe::close): Renamed to ...
+ (event_pipe::close_pipe): ... this.
+ * event-pipe.h (class event_pipe): Updated.
+ gdb/
+ * inf-ptrace.h (async_file_open, async_file_close): Updated.
+ gdbserver/
+ * gdbserver/linux-low.cc (linux_process_target::async): Likewise.
+
+2022-03-03 Alan Modra <amodra@gmail.com>
+
+ Adjust ld ctf test for 32-bit targets
+ powerpc-linux, and I suspect other 32-bit targets, report "aligned at
+ 0x4" for this test.
+
+ * testsuite/ld-ctf/nonrepresentable.d: Accept any alignment.
+
+2022-03-03 Luis Machado <luis.machado@arm.com>
+
+ Update my e-mail address in the MAINTAINERS file
+ Update the information accordingly.
+
+2022-03-03 Tiezhu Yang <yangtiezhu@loongson.cn>
+
+ gdb: testsuite: fix failed testcases in gdb.base/gdb-caching-proc.exp
+ When execute the following command:
+
+ make check-gdb TESTS="gdb.base/gdb-caching-proc.exp"
+
+ we can see there exist some failed testcases:
+
+ FAIL: gdb.base/gdb-caching-proc.exp: can_spawn_for_attach: 0: can spawn for attach (got interactive prompt)
+ FAIL: gdb.base/gdb-caching-proc.exp: can_spawn_for_attach: 1: can spawn for attach (got interactive prompt)
+ FAIL: gdb.base/gdb-caching-proc.exp: can_spawn_for_attach: 2: can spawn for attach (got interactive prompt)
+ FAIL: gdb.base/gdb-caching-proc.exp: can_spawn_for_attach: 3: can spawn for attach (got interactive prompt)
+ FAIL: gdb.base/gdb-caching-proc.exp: can_spawn_for_attach: 4: can spawn for attach (got interactive prompt)
+ FAIL: gdb.base/gdb-caching-proc.exp: can_spawn_for_attach: 5: can spawn for attach (got interactive prompt)
+ FAIL: gdb.base/gdb-caching-proc.exp: can_spawn_for_attach: 6: can spawn for attach (got interactive prompt)
+ FAIL: gdb.base/gdb-caching-proc.exp: can_spawn_for_attach: 7: can spawn for attach (got interactive prompt)
+ FAIL: gdb.base/gdb-caching-proc.exp: can_spawn_for_attach: 8: can spawn for attach (got interactive prompt)
+ FAIL: gdb.base/gdb-caching-proc.exp: can_spawn_for_attach: 9: can spawn for attach (got interactive prompt)
+
+ here are the detailed messages in gdb/testsuite/gdb.log:
+
+ attach 873776
+ A program is being debugged already. Kill it? (y or n) n
+ Not killed.
+ (gdb) FAIL: gdb.base/gdb-caching-proc.exp: can_spawn_for_attach: 0: can spawn for attach (got interactive prompt)
+
+ so handle the case "A program is being debugged already. Kill it" in
+ can_spawn_for_attach to fix the failed testcases.
+
+2022-03-03 Alan Modra <amodra@gmail.com>
+
+ comment typo fix
+
+2022-03-03 Alan Modra <amodra@gmail.com>
+
+ PowerPC64 DT_RELR relative reloc addresses
+ Section addresses can change between ppc64_elf_size_stubs and
+ ppc64_elf_build_stubs due to .eh_frame editing. The idea of stashing
+ r_offset final addresses calculated in ppc64_elf_size_stubs for use by
+ ppc64_elf_build_stubs was never a good idea. Instead, we need to keep
+ section/offset pairs.
+
+ * elf64-ppc.c (struct ppc_link_hash_table): Delete relr_addr.
+ Add relr section/offset array.
+ (append_relr_off): Rewrite. Update all callers.
+ (sort_relr): New function.
+ (ppc64_elf_size_stubs): Adjust to suit new relative reloc stash.
+ (ppc64_elf_build_stubs): Likewise.
+
+2022-03-03 GDB Administrator <gdbadmin@sourceware.org>
+
+ Automatic date update in version.in
+
+2022-03-02 John Baldwin <jhb@FreeBSD.org>
+
+ configure: Stop checking for PT_GETXMMREGS.
+ This request is present on all modern *BSD/i386 systems (those
+ released since mid-2006), and the *BSD/i386 targets now assume it is
+ present unconditionally.
+
+ i386-bsd-nat: Assume PT_GETXMMREGS is present.
+ NetBSD has included PT_GETXMMREGS since 1.6 released in September
+ 2002. OpenBSD has included PT_GETXMMREGS since 3.8 released in
+ November 2005.
+
+ i386-fbsd-nat: Assume PT_GETXMMREGS is present.
+ PT_GETXMMREGS was first added in FreeBSD 6.0 released in November 2005.
+ The last FreeBSD release without support was 5.5 released in May 2006.
+
+2022-03-02 John Baldwin <jhb@FreeBSD.org>
+
+ fbsd-tdep: Implement the vsyscall_range gdbarch hook.
+ FreeBSD recently added a real vDSO in its shared page for the amd64
+ architecture. The vDSO is mapped at the address given by the
+ AT_KPRELOAD ELF auxiliary vector entry. To find the end of the
+ mapping range, parse the list of virtual map entries used by 'info
+ proc mappings' either from the NT_PROCSTAT_VMMAP core dump note, or
+ via the kinfo_getvmmap function for native targets (fetched from the
+ native target as the TARGET_OBJECT_FREEBSD_VMMAP object).
+
+ This silences warnings on recent FreeBSD/amd64 kernels due to not
+ finding symbols for the vdso:
+
+ warning: Could not load shared library symbols for [vdso].
+ Do you need "set solib-search-path" or "set sysroot"?
+
+2022-03-02 Tom Tromey <tromey@adacore.com>
+
+ Rewrite make-target-delegates in Python
+ I think gdb is probably better off having fewer languages involved
+ when generating code. 'sh' is unavoidable for build-time generation,
+ but for other things, let's use Python.
+
+ This rewrites make-target-delegates in Python. I've stuck pretty
+ closely to the original code in this rewrite, so it may look slightly
+ weird from a Python perspective.
+
+ The only output difference is that a copyright header is now
+ generated, using the code introduced in the previous patch.
+
+ make-target-delegates.py is simpler to invoke, as it knows the correct
+ input file to scan and it creates the output file itself.
+
+2022-03-02 Tom Tromey <tromey@adacore.com>
+
+ Move copyright code from gdbarch.py to new file
+ This moves the copyright code from gdbarch.py to a new Python source
+ file, gdbcopyright.py. The function in this file will find the
+ copyright dates by scanning the calling script. This will be reused
+ in a future patch.
+
+ This involved minor changes to the output of gdbarch.py. Also, I've
+ updated copyright.py to remove the reference to gdbarch.sh. We don't
+ need to mention gdbarch.py there, either.
+
+2022-03-02 GDB Administrator <gdbadmin@sourceware.org>
+
+ Automatic date update in version.in
+
+2022-03-01 Tom Tromey <tom@tromey.com>
+
+ Some "distclean" fixes in gdb
+ PR build/12440 points out that "make distclean" is broken in gdb.
+ Most of the breakage comes from other projects in the tree, but we can
+ fix some of the issues, which is what this patch does.
+
+ Note that the yacc output files, like c-exp.c, are left alone. In a
+ source distribution, these are included in the tarball, and if the
+ user builds in-tree, we would not want to remove them.
+
+ While that seems a bit obscure, it seems to me that "distclean" is
+ only really useful for in-tree builds anyway -- out-of-tree I simply
+ delete the entire build directory and start over.
+
+ Bug: https://sourceware.org/bugzilla/show_bug.cgi?id=12440
+
+2022-03-01 Tom Tromey <tom@tromey.com>
+
+ Fix typo in the "alias" example
+ PR cli/17332, filed around 8 years ago, points out a typo in the docs
+ -- in one example, the command and its output are obviously out of
+ sync. This patch fixes it. I'm checking this in as obvious.
+
+ Bug: https://sourceware.org/bugzilla/show_bug.cgi?id=17332
+
+2022-03-01 Nick Clifton <nickc@redhat.com>
+
+ Fix a typo in the previous delta to bfdio.c.
+ PR 25713
+ * bfdio.c (_bfd_real_fopen): Fix typo.
+
+2022-03-01 Alan Modra <amodra@gmail.com>
+
+ Revert "Check thin archive element file size against archive header"
+ This reverts commit 48e3e6aec8a4f37d00ea6c0da3ab45e76490e3db.
+
+ PR 28929
+ * archive.c (_bfd_get_elt_at_filepos): Don't check thin archive
+ element file size.
+
+2022-03-01 Nick Clifton <nickc@redhat.com>
+
+ Fix linker tests to compile with gcc-12.
+ PR 21964
+ * testsuite/ld-elf/pr21964-1a.c: Fix array comparisons.
+ * testsuite/ld-elf/pr21964-1b.c: Likewise.
+ * testsuite/ld-elf/pr21964-1c.c: Likewise.
+ * testsuite/ld-elf/pr21964-2a.c: Likewise.
+ * testsuite/ld-elf/pr21964-2b.c: Likewise.
+ * testsuite/ld-elf/pr21964-3a.c: Likewise.
+
+ Prevent an assertion from being triggered when linking an ARM object file with incorrectly set build attributes.
+ PR 28848
+ PR 28859
+ * elf32-arm.c (elf32_arm_merge_eabi_attributes): If the first
+ input bfd has a Tag_ABI_HardFP_use set to 3 but does not also have
+ TAG_FP_arch set then reset the TAG_ABI_HardFP_use.
+
+2022-03-01 Tiezhu Yang <yangtiezhu@loongson.cn>
+
+ gdb: testsuite: fix wrong expected result in attach-pie-noexec.exp
+ If /proc/sys/kernel/yama/ptrace_scope is 1, when execute the test case
+ gdb.base/attach-pie-noexec.exp without superuser, the gdb.log shows the
+ following info:
+
+ (gdb) attach 6500
+ Attaching to process 6500
+ ptrace: Operation not permitted.
+ (gdb) PASS: gdb.base/attach-pie-noexec.exp: attach
+
+ It is obviously wrong, the expected result should be UNSUPPORTED in such
+ a case.
+
+ It is better to make can_spawn_for_attach to return false for this case.
+ It would have to setup a small test program, compile it to exec, spawn it
+ and try to attach to it.
+
+ With this patch, we can see "Operation not permitted" in the log info,
+ and then we can do the following processes to test:
+ (1) set ptrace_scope as 0
+ $ echo 0 | sudo tee /proc/sys/kernel/yama/ptrace_scope
+ $ make check-gdb TESTS="gdb.base/attach-pie-noexec.exp"
+ (2) use sudo
+ $ sudo make check-gdb TESTS="gdb.base/attach-pie-noexec.exp"
+
+ Additionally, handle the other cases when test with RUNTESTFLAGS=
+ "--target_board=native-extended-gdbserver".
+
+2022-03-01 Tiezhu Yang <yangtiezhu@loongson.cn>
+
+ gdb: testsuite: print explicit test result in can_spawn_for_attach
+ In the current code, there is no test result when execute the following
+ commands:
+
+ $ make check-gdb TESTS="gdb.base/attach-pie-noexec.exp" RUNTESTFLAGS="--target_board=remote-gdbserver-on-localhost"
+ $ make check-gdb TESTS="gdb.base/attach-pie-noexec.exp" RUNTESTFLAGS="--target_board=native-gdbserver"
+
+ It is better to print explicit test result in can_spawn_for_attach.
+
+2022-03-01 Tiezhu Yang <yangtiezhu@loongson.cn>
+
+ gdb: add Tiezhu Yang as LoongArch maintainer
+ The patch series "gdb: Add basic support for LoongArch" has been
+ merged into master, list Tiezhu Yang as LoongArch maintainer.
+
+2022-03-01 GDB Administrator <gdbadmin@sourceware.org>
+
+ Automatic date update in version.in
+
+2022-02-28 Keith Seitz <keiths@redhat.com>
+
+ Fix "spawn id XYZ not open" errors in gdb.mi/mi-exec-run.exp
+ Running mi-exec-run.exp on native-extended-gdbserver/-m{32,64}
+ causes several Tcl errors to appear. For example,
+
+ (gdb)
+ ERROR: : spawn id exp20 not open
+ while executing
+ "expect {
+ -i exp11 -timeout 10
+ -i "$inferior_spawn_id"
+ -re ".*Cannot exec.*Permission denied" {
+ set saw_perm_error 1
+ verbose -log "saw..."
+ ("uplevel" body line 1)
+ invoked from within
+ "uplevel $body" NONE : spawn id exp20 not open
+ UNRESOLVED: gdb.mi/mi-exec-run.exp: inferior-tty=separate: mi=separate: force-fail=1: run failure detected (eof)
+
+ This is happening because of the way this test is implemented:
+
+ while {1} {
+ gdb_expect {
+ -i "$inferior_spawn_id"
+ -re ".*Cannot exec.*Permission denied" {
+ set saw_perm_error 1
+ verbose -log "saw mi error"
+ }
+ -i "$gdb_spawn_id"
+ -re "\\^error,msg=\"During startup program exited with code 127" {
+ set saw_mi_error 1
+ verbose -log "saw mi error"
+ }
+ # and so on
+ }
+ }
+
+ The first time this loop is executed, `inferior_spawn_id' is valid. When the
+ first branch of the expect statement is reached, gdbserver has exited, closing
+ the spawn_id. Since we haven't seen the gdb-side error yet, the loop is executed
+ again. The first branch now refers to a non-existent spawn_id, leading to the error.
+
+ This can be fixed by using exp_continue to loop in expect instead of looping around
+ expect, which is the approach I have used[1]. Note I've had to update the expected
+ message for the "During startup..." error message when running with gdbserver.
+
+ One other small change I've made is to add a log entry which spills the values of
+ the two variables, saw_mi_error and saw_perm_error (and updated the log output
+ for the later). This should make the log output clearer about why the test failed.
+
+ With this patch installed, all the ERRORs disappear, leaving previously masked
+ FAILs (which I have not attempted to fix).
+
+ [1] Anyone know why this test doesn't simply use gdb_test_multiple? I can only
+ assume that it was intentionally written this way, and I've modified the code with
+ that assumption. I have tested a version using gdb_test_multiple, and that appears
+ to work fine, too, if that is preferred. [It still employs exp_continue to fix the
+ spawn_id errors.]
+
+2022-02-28 Tom Tromey <tromey@adacore.com>
+
+ Add more filename styling
+ I found a few spots where filename styling ought to be applied, but is
+ not.
+
+2022-02-28 Tom Tromey <tromey@adacore.com>
+
+ Fix maybe-uninitialized warning in py-infthread.c
+ I got this warning from py-infthread.c using the Fedora 34 system GCC:
+
+ ../../binutils-gdb/gdb/python/py-infthread.c:102:30: warning: ‘extra_info’ may be used uninitialized in this function [-Wmaybe-uninitialized]
+
+ I think this happens because GDB_PY_HANDLE_EXCEPTION expands to an
+ 'if' whose condition is always true -- but GCC can't know this. This
+ patch avoids the warning by adding a harmless initialization.
+
+2022-02-28 Tom Tromey <tromey@adacore.com>
+
+ Handle multi-byte bracket sequences in Ada lexer
+ As noted in an earlier patch, the Ada lexer does not handle multi-byte
+ bracket sequences. This patch adds support for these for character
+ literals. gdb does not generally seem to handle the Ada wide string
+ types, so for the time being these continue to be excluded -- but an
+ explicit error is added to make this more clear.
+
+2022-02-28 Tom Tromey <tromey@adacore.com>
+
+ Handle 'QWW' encoding case in Ada enums
+ In Ada, an enum can contain character literals. GNAT encodes these
+ values in a special way. For example, the Unicode character U+0178
+ would be represented as 'QW0178' in the DWARF:
+
+ <3><112f>: Abbrev Number: 2 (DW_TAG_enumerator)
+ <1130> DW_AT_name : (indirect string, offset: 0x19ff): QW0178
+ <1134> DW_AT_const_value : 2
+
+ gdb handles this reasonably well, but failed to handle the 'QWW'
+ encoding, which is used for characters outside the base plane.
+
+ Also, while working on this, I noticed that gdb will print the decimal
+ value for an enum character constant:
+
+ (gdb) print Char_X
+ $2 = 1 'x'
+
+ This is a nice feature, IMO, because in this situation the 'x' enum
+ constant does not have its usual decimal value -- it has the value
+ that's assigned based on the enumeration type.
+
+ However, gdb did not do this when it decided to print the constant
+ using the bracket notation:
+
+ (gdb) print Char_Thorn
+ $3 = ["de"]
+
+ This patch changes gdb to print the decimal value here as well, and to
+ put the bracket notation in single quotes -- otherwise gdb will be
+ printing something that it can't then read. Now it looks like:
+
+ (gdb) print Char_Thorn
+ $3 = 4 '["de"]'
+
+ Note that gdb can't read longer bracket notations, like the other ones
+ printed in this test case:
+
+ (gdb) print Char_King
+ $4 = 3 '["01fa00"]'
+
+ While I think this is a bug, I plan to fix it separately.
+
+ Finally, in the new test case, the copyright dates are chosen this way
+ because this all started as a copy of an existing test.
+
+2022-02-28 Andrew Burgess <aburgess@redhat.com>
+
+ gdb/python: Add gdb.InferiorThread.details attribute
+ This adds a new read-only attribute gdb.InferiorThread.details, this
+ attribute contains a string, the results of target_extra_thread_info
+ for the thread, or None, if target_extra_thread_info returns nullptr.
+
+ As the string returned by target_extra_thread_info is unstructured,
+ this attribute is only really useful for echoing straight through to
+ the user, but, if a user wants to write a command that displays the
+ same, or a similar 'Thread Id' to the one seen in 'info threads', then
+ they need access to this string.
+
+ Given that the string produced by target_extra_thread_info varies by
+ target, there's only minimal testing of this attribute, I check that
+ the attribute can be accessed, and that the return value is either
+ None, or a string.
+
+2022-02-28 Keith Seitz <keiths@redhat.com>
+
+ Error when gdb_is_target_1 is called without running gdb instance
+ This is a snafu that I encountered while implementing the previous
+ patch, which attempted to use gdb_is_target_native. This proc and
+ gdb_is_target_remote both rely on gdb_is_target_1, which actually
+ cannot be called without gdb already running.
+
+ This patch adds appropriate warning comments to these procs and
+ causes gdb_is_target_1 to issue a Tcl error if it is called without a
+ gdb instance already running. This should prevent unwitting callers
+ from using this at the wrong time.
+
+2022-02-28 Keith Seitz <keiths@redhat.com>
+
+ Fix gdb.fortran "failed to extract expected results" errors
+ When running the gdb.fortran tests array-slices.exp and lbound-ubound.exp,
+ the test suite throws several ERRORs on native-gdbserver/-m{32,64},
+ and native-extended-gdbsever/-m{32,64}:
+
+ [on native-extended-gdbserver/-m64]
+ Running /home/keiths/work/gdb/branches/testsuite-errors/linux/gdb/testsuite/../../../src/gdb/testsuite/gdb.fortran/array-slices.exp ...
+ ERROR: failed to extract expected results
+ ERROR: failed to extract expected results
+ Running /home/keiths/work/gdb/branches/testsuite-errors/linux/gdb/testsuite/../../../src/gdb/testsuite/gdb.fortran/lbound-ubound.exp ...
+ ERROR: failed to extract expected results for lbound
+
+ This occurs because the tests require inferior I/O which we do not have
+ access to while using these targets.
+
+ This patch skips these tests when running on non-native targets.
+
+2022-02-28 Torbj?rn Svensson <torbjorn.svensson@st.com>
+
+ Further correct the handling of long pathnames on Windows hosts.
+ PR 25713
+ * bfdio.c (_bfd_real_fopen): Fix handling of parhs longer than 260
+ characters on Windows hosts.
+
+2022-02-28 Nick Clifton <nickc@redhat.com>
+
+ Clarify the wording of the error message when an obsolete configuration is encountered.
+ PR 28886
+ * config.bfd: Update error message for obsolete configurations.
+
+2022-02-28 GDB Administrator <gdbadmin@sourceware.org>
+
+ Automatic date update in version.in
+
+2022-02-27 GDB Administrator <gdbadmin@sourceware.org>
+
+ Automatic date update in version.in
+
+2022-02-26 Kevin Buettner <kevinb@redhat.com>
+
+ Handle recursive internal problem in gdb_internal_error_resync
+ I came across this problem when testing gdb.base/gdb-sigterm.exp
+ on a machine with a pre-release version of glib-2.34 installed:
+
+ A problem internal to GDB has been detected,
+ further debugging may prove unreliable.
+ Quit this debugging session? (y or n) Recursive internal problem.
+ FAIL: gdb.base/gdb-sigterm.exp: expect eof #0 (GDB internal error)
+ Resyncing due to internal error.
+ ERROR: : spawn id exp11 not open
+ while executing
+ "expect {
+ -i exp11 -timeout 10
+ -re "Quit this debugging session\\? \\(y or n\\) $" {
+ send_gdb "n\n" answer
+ incr count
+ }
+ -re "Create..."
+ ("uplevel" body line 1)
+ invoked from within
+ "uplevel $body" NONE : spawn id exp11 not open
+ ERROR: Could not resync from internal error (timeout)
+ gdb.base/gdb-sigterm.exp: expect eof #0: stepped 9 times
+ UNRESOLVED: gdb.base/gdb-sigterm.exp: 50 SIGTERM passes
+
+ I don't have a problem with the latter ERROR nor the UNRESOLVED
+ messages. However the first ERROR regarding the exp11 spawn id
+ not being open is not especially useful.
+
+ This commit handles the "Recursive internal problem" case, avoiding
+ the problematic ERROR shown above.
+
+ With this commit in place, the log messages look like this instead:
+
+ A problem internal to GDB has been detected,
+ further debugging may prove unreliable.
+ Quit this debugging session? (y or n) Recursive internal problem.
+ FAIL: gdb.base/gdb-sigterm.exp: expect eof #15 (GDB internal error)
+ Resyncing due to internal error.
+ ERROR: Could not resync from internal error (recursive internal problem)
+ gdb.base/gdb-sigterm.exp: expect eof #15: stepped 12 times
+ UNRESOLVED: gdb.base/gdb-sigterm.exp: 50 SIGTERM passes
+
+ gdb/testsuite/ChangeLog:
+
+ * lib/gdb.exp (gdb_internal_error_resync): Handle "Recursive
+ internal problem".
+
+2022-02-26 GDB Administrator <gdbadmin@sourceware.org>
+
+ Automatic date update in version.in
+
+2022-02-25 Aaron Merey <amerey@redhat.com>
+
+ gdb-add-index: disable debuginfod
+ gdb-add-index may trigger debuginfod's first-use notice. The notice
+ is misleading in this case. It instructs the user to modify .gdbinit
+ in order to permanently enable/disable debuginfod but gdb-add-index
+ invokes gdb with -nx which ignores .gdbinit.
+
+ Additionally debuginfod is not needed for gdb-add-index since the
+ symbol file is given as an argument and should already be present
+ locally.
+
+ Fix this by disabling debuginfod when gdb-add-index invokes gdb.
+
+2022-02-25 Andrew Burgess <aburgess@redhat.com>
+
+ gdb: add operator+= and operator+ overload for std::string
+ This commit adds operator+= and operator+ overloads for adding
+ gdb::unique_xmalloc_ptr<char> to a std::string. I could only find 3
+ places in GDB where this was useful right now, and these all make use
+ of operator+=.
+
+ I've also added a self test for gdb::unique_xmalloc_ptr<char>, which
+ makes use of both operator+= and operator+, so they are both getting
+ used/tested.
+
+ There should be no user visible changes after this commit, except when
+ running 'maint selftest', where the new self test is visible.
+
+2022-02-25 Tom Tromey <tromey@adacore.com>
+
+ Print MI prompt on interrupted command
+ Joel noticed that if the remote dies unexpectedly during a command --
+ you can simulate this by using "continue" and then killing gdbserver
+ -- then the CLI will print a new prompt, but MI will not. Later, we
+ found out that this was also filed in bugzilla as PR mi/23820.
+
+ The output looks something like this:
+
+ | (gdb)
+ | cont
+ | &"cont\n"
+ | ~"Continuing.\n"
+ | ^running
+ | *running,thread-id="all"
+ | (gdb)
+ | [... some output from GDB during program startup...]
+ | =thread-exited,id="1",group-id="i1"
+ | =thread-group-exited,id="i1"
+ | &"Remote connection closed\n"
+
+ Now, what about that "(gdb)" in the middle?
+
+ That prompt comes from this questionable code in
+ mi-interp.c:mi_on_resume_1:
+
+ /* This is what gdb used to do historically -- printing prompt
+ even if it cannot actually accept any input. This will be
+ surely removed for MI3, and may be removed even earlier. */
+ if (current_ui->prompt_state == PROMPT_BLOCKED)
+ fputs_unfiltered ("(gdb) \n", mi->raw_stdout);
+
+ ... which seems like something to remove. But maybe the intent here
+ is that this prompt is sufficient, and MI clients must be ready to
+ handle output coming after a prompt. On the other hand, if this code
+ *is* removed, then nothing would print a prompt in this scenario.
+
+ Anyway, the CLI and the TUI handle emitting the prompt here by hooking
+ into gdb::observers::command_error, but MI doesn't install an observer
+ here.
+
+ This patch adds the missing observer and arranges to show the MI
+ prompt. Regression tested on x86-64 Fedora 34.
+
+ It seems like this area could be improved a bit, by having
+ start_event_loop call the prompt-displaying code directly, rather than
+ indirecting through an observer. However, I haven't done this.
+
+ Bug: https://sourceware.org/bugzilla/show_bug.cgi?id=23820
+
+2022-02-25 Andrew Burgess <aburgess@redhat.com>
+ Tom Tromey <tromey@adacore.com>
+
+ gdb/testsuite: fix list.exp test cases
+ PR testsuite/7142 -- old enough to have been converted from Gnats --
+ points out that test_list_filename_and_function in gdb.base/list.exp
+ has "fails" that are unmatched with passes. This patch cleans this up
+ a little.
+
+ Bug: https://sourceware.org/bugzilla/show_bug.cgi?id=7142
+
+2022-02-25 Tsukasa OI <research_trasio@irq.a4lg.com>
+
+ RISC-V: Remove a loop in the ISA parser
+ Since commit e601909a3287bf541c6a7d82214bb387d2c76d82 ("RISC-V: Support
+ to parse the multi-letter prefix in the architecture string.") changed
+ so that all prefixed extensions are parsed in single
+ riscv_parse_prefixed_ext call, a "while" loop on riscv_parse_subset
+ is no longer required.
+
+ bfd/ChangeLog:
+
+ * elfxx-riscv.c (riscv_parse_subset): Remove unnecessary loop.
+
+2022-02-25 Tsukasa OI <research_trasio@irq.a4lg.com>
+
+ RISC-V: Fix mask for some fcvt instructions
+ This commit fixes incorrect uses of mask values in 'fcvt' instruction
+ family.
+
+ opcodes/ChangeLog:
+
+ * riscv-opc.c (riscv_opcodes): Fix incorrect uses of mask values
+ in 'fcvt' instruction family.
+
+2022-02-25 Keith Seitz <keiths@redhat.com>
+
+ Support template lookups in strncmp_iw_with_mode
+ This patch adds support for wild template parameter list matches, similar
+ to how ABI tags or function overloads are now handled.
+
+ With this patch, users will be able to "gloss over" the details of matching
+ template parameter lists. This is accomplished by adding (yet more) logic
+ to strncmp_iw_with_mode to skip parameter lists if none is explicitly given
+ by the user.
+
+ Here's a simple example using gdb.linespec/cpls-ops.exp:
+
+ Before
+ ------
+ (gdb) ptype test_op_call
+ type = struct test_op_call {
+ public:
+ void operator()(void);
+ void operator()(int);
+ void operator()(long);
+ void operator()<int>(int *);
+ }
+ (gdb) b test_op_call::operator()
+ Breakpoint 1 at 0x400583: test_op_call::operator(). (3 locations)
+ (gdb) i b
+ Num Type Disp Enb Address What
+ 1 breakpoint keep y <MULTIPLE>
+ 1.1 y 0x400583 in test_op_call::operator()(int)
+ at cpls-ops.cc:43
+ 1.2 y 0x40058e in test_op_call::operator()()
+ at cpls-ops.cc:47
+ 1.3 y 0x40059e in test_op_call::operator()(long)
+ at cpls-ops.cc:51
+
+ The breakpoint at test_op_call::operator()<int> was never set.
+
+ After
+ -----
+ (gdb) b test_op_call::operator()
+ Breakpoint 1 at 0x400583: test_op_call::operator(). (4 locations)
+ (gdb) i b
+ Num Type Disp Enb Address What
+ 1 breakpoint keep y <MULTIPLE>
+ 1.1 y 0x400583 in test_op_call::operator()(int)
+ at cpls-ops.cc:43
+ 1.2 y 0x40058e in test_op_call::operator()()
+ at cpls-ops.cc:47
+ 1.3 y 0x40059e in test_op_call::operator()(long)
+ at cpls-ops.cc:51
+ 1.4 y 0x4008d0 in test_op_call::operator()<int>(int*)
+ at cpls-ops.cc:57
+
+ Similar to how scope lookups work, passing "-qualified" to the break command
+ will cause a literal lookup of the symbol. In the example immediately above,
+ this will cause GDB to only find the three non-template functions.
+
+2022-02-25 Keith Seitz <keiths@redhat.com>
+
+ Unit tests for strncmp_iw_with_mode
+ This patch attempts to make a start at adding unit tests for
+ strncmp_iw_with_mode. While there is quite a bit of testing
+ of this function in other tests, these are currently end-to-end
+ tests.
+
+ This patch attempts to cover the basics of string matching, white
+ space, C++ ABI tags, and several other topics. However, one area
+ that is ostensibly missing is testing the `match_for_lcd' feature.
+ This is otherwise tested as part of our end-to-end DejaGNU-based
+ testing.
+
+2022-02-25 Keith Seitz <keiths@redhat.com>
+
+ Move find_toplevel_char to cp-support.[ch]
+ find_toplevel_char is being used more and more outside of linespec.c, so
+ this patch moves it into cp-support.[ch].
+
+2022-02-25 GDB Administrator <gdbadmin@sourceware.org>
+
+ Automatic date update in version.in
+
+2022-02-24 Tom Tromey <tom@tromey.com>
+ Andrew Burgess <aburgess@redhat.com>
+
+ Fix crash in Fortran code
+ PR fortran/28801 points out a gdb crash that can be provoked by
+ certain Fortran code. The bug is that f77_get_upperbound assumes the
+ property is either a constant or undefined, but in this case it is
+ PROP_LOCEXPR.
+
+ This patch fixes the crash by making this function (and the
+ lower-bound one as well) do the correct check before calling
+ 'const_val'.
+
+ Thanks to Andrew for writing the test case.
+
+ Bug: https://sourceware.org/bugzilla/show_bug.cgi?id=28801
+
+2022-02-24 John Baldwin <jhb@FreeBSD.org>
+
+ Revert "do_target_wait_1: Clear TARGET_WNOHANG if the target isn't async."
+ Commit 14b3360508b1 ("do_target_wait_1: Clear
+ TARGET_WNOHANG if the target isn't async.") broke some multi-target
+ tests, such as gdb.multi/multi-target-info-inferiors.exp. The symptom
+ is that execution just hangs at some point. What happens is:
+
+ 1. One remote inferior is started, and now sits stopped at a breakpoint.
+ It is not "async" at this point (but it "can async").
+
+ 2. We run a native inferior, the event loop gets woken up by the native
+ target's fd.
+
+ 3. In do_target_wait, we randomly choose an inferior to call target_wait
+ on first, it happens to be the remote inferior.
+
+ 4. Because the target is currently not "async", we clear
+ TARGET_WNOHANG, resulting in synchronous wait. We therefore block
+ here:
+
+ #0 0x00007fe9540dbb4d in select () from /usr/lib/libc.so.6
+ #1 0x000055fc7e821da7 in gdb_select (n=15, readfds=0x7ffdb77c1fb0, writefds=0x0, exceptfds=0x7ffdb77c2050, timeout=0x7ffdb77c1f90) at /home/simark/src/binutils-gdb/gdb/posix-hdep.c:31
+ #2 0x000055fc7ddef905 in interruptible_select (n=15, readfds=0x7ffdb77c1fb0, writefds=0x0, exceptfds=0x7ffdb77c2050, timeout=0x7ffdb77c1f90) at /home/simark/src/binutils-gdb/gdb/event-top.c:1134
+ #3 0x000055fc7eda58e4 in ser_base_wait_for (scb=0x6250002e4100, timeout=1) at /home/simark/src/binutils-gdb/gdb/ser-base.c:240
+ #4 0x000055fc7eda66ba in do_ser_base_readchar (scb=0x6250002e4100, timeout=-1) at /home/simark/src/binutils-gdb/gdb/ser-base.c:365
+ #5 0x000055fc7eda6ff6 in generic_readchar (scb=0x6250002e4100, timeout=-1, do_readchar=0x55fc7eda663c <do_ser_base_readchar(serial*, int)>) at /home/simark/src/binutils-gdb/gdb/ser-base.c:444
+ #6 0x000055fc7eda718a in ser_base_readchar (scb=0x6250002e4100, timeout=-1) at /home/simark/src/binutils-gdb/gdb/ser-base.c:471
+ #7 0x000055fc7edb1ecd in serial_readchar (scb=0x6250002e4100, timeout=-1) at /home/simark/src/binutils-gdb/gdb/serial.c:393
+ #8 0x000055fc7ec48b8f in remote_target::readchar (this=0x617000038780, timeout=-1) at /home/simark/src/binutils-gdb/gdb/remote.c:9446
+ #9 0x000055fc7ec4da82 in remote_target::getpkt_or_notif_sane_1 (this=0x617000038780, buf=0x6170000387a8, forever=1, expecting_notif=1, is_notif=0x7ffdb77c24f0) at /home/simark/src/binutils-gdb/gdb/remote.c:9928
+ #10 0x000055fc7ec4f045 in remote_target::getpkt_or_notif_sane (this=0x617000038780, buf=0x6170000387a8, forever=1, is_notif=0x7ffdb77c24f0) at /home/simark/src/binutils-gdb/gdb/remote.c:10037
+ #11 0x000055fc7ec354d4 in remote_target::wait_ns (this=0x617000038780, ptid=..., status=0x7ffdb77c33c8, options=...) at /home/simark/src/binutils-gdb/gdb/remote.c:8147
+ #12 0x000055fc7ec38aa1 in remote_target::wait (this=0x617000038780, ptid=..., status=0x7ffdb77c33c8, options=...) at /home/simark/src/binutils-gdb/gdb/remote.c:8337
+ #13 0x000055fc7f1409ce in target_wait (ptid=..., status=0x7ffdb77c33c8, options=...) at /home/simark/src/binutils-gdb/gdb/target.c:2612
+ #14 0x000055fc7e19da98 in do_target_wait_1 (inf=0x617000038080, ptid=..., status=0x7ffdb77c33c8, options=...) at /home/simark/src/binutils-gdb/gdb/infrun.c:3636
+ #15 0x000055fc7e19e26b in operator() (__closure=0x7ffdb77c2f90, inf=0x617000038080) at /home/simark/src/binutils-gdb/gdb/infrun.c:3697
+ #16 0x000055fc7e19f0c4 in do_target_wait (ecs=0x7ffdb77c33a0, options=...) at /home/simark/src/binutils-gdb/gdb/infrun.c:3716
+ #17 0x000055fc7e1a31f7 in fetch_inferior_event () at /home/simark/src/binutils-gdb/gdb/infrun.c:4061
+
+ Before the aforementioned commit, we would not have cleared
+ TARGET_WNOHANG, the remote target's wait would have returned nothing,
+ and we would have consumed the native target's event.
+
+ After applying this revert, the testsuite state looks as good as before
+ for me on Ubuntu 20.04 amd64.
+
+ Change-Id: Ic17a1642935cabcc16c25cb6899d52e12c2f5c3f
+
+2022-02-24 Andrew Burgess <aburgess@redhat.com>
+
+ gdb: use a range based for loop when iterating over an array
+ Make use of a range based for loop to iterate over a static global
+ array, removing the need to have a null entry at the end of the
+ array.
+
+ There should be no user visible changes after this commit.
+
+2022-02-24 Dominique Quatravaux <dominique.quatravaux@epfl.ch>
+ Louis-He <1726110778@qq.com>
+ Philippe Blain <levraiphilippeblain@gmail.com>
+
+ gdb/darwin: skip over WIFSTOPPED wait4 status
+ On modern Darwin's, there appears to be a new circumstance in which a
+ MACH_NOTIFY_DEAD_NAME message can be received, and which was not
+ previously accounted for: to signal the WIFSTOPPED condition in the
+ debuggee. In that case the debuggee is not dead yet (and in fact,
+ counting it as dead would cause a zombie leak - A process in such a
+ state reparents to PID 1, but cannot be killed).
+
+ - Read and ignore such messages (counting on the next exception message
+ to let us know of the inferior's new state again)
+ - Refactor logging so as to clearly distinguish between the
+ MACH_NOTIFY_DEAD_NAME cases (WIFEXITED, WIFSTOPPED, signal, or
+ something else), and warn in the last case
+
+ Change-Id: Ie86904a894e9bd154e6b674b1bfbfbaee7fde3e1
+
+2022-02-24 Simon Marchi <simon.marchi@polymtl.ca>
+
+ gdb/linux-tdep: move "Perms" column right
+ Commit 29ef4c0699e1 ("gdb/linux-tdep.c: Add Perms to the 'info proc
+ mappings' output") has broken test gdb.base/info-proc.exp on Linux,
+ because it changes the output of "info proc mappings" in a way that the
+ test does not expect (my bad for not testing before pushing).
+
+ I looked at how FreeBSD handles this, since I remembered it did show
+ permission flags. It looks like this:
+
+ Start Addr End Addr Size Offset Flags File
+ 0x200000 0x243000 0x43000 0x0 r-- CN-- /usr/local/bin/tmux
+
+ (I think that `Flags` and the flags not being aligned is not
+ intentional)
+
+ The test passes on FreeBSD, because the test looks for four hex numbers
+ in a row and ignores the rest:
+
+ ".*Mapped address spaces:.*${hex}${ws}${hex}${ws}${hex}${ws}${hex}.*"
+
+ I suggest fixing it on Linux by moving the flags column to the same
+ place as in the FreeBSD output. It makes things a bit more consistent
+ between OSes, and we don't have to touch the test.
+
+ At the same time, make use of the actual length of the permission's
+ string to specify the number of characters to print.
+
+ Before this patch, the output looks like:
+
+ Start Addr End Addr Perms Size Offset objfile
+ 0x55dd4b544000 0x55dd4b546000 r--p 0x2000 0x0 /usr/bin/sleep
+
+ and after, it looks like:
+
+ Start Addr End Addr Size Offset Perms objfile
+ 0x5622ae662000 0x5622ae664000 0x2000 0x0 r--p /usr/bin/sleep
+
+ Change-Id: If0fc167b010b25f97a3c54e2f491df4973ccde8f
+
+2022-02-24 Simon Marchi <simon.marchi@polymtl.ca>
+
+ gdb/linux-tdep: make read_mapping return a structure
+ Change read_mapping to return a structure instead of taking many output
+ parameters. Change the string + length output parameters (permissions
+ and device) to be gdb::string_view, since that's what string_view is
+ for (a non-NULL terminated view on a string). No changes in behavior
+ expected.
+
+ Change-Id: I86e627d84d3dda8c9b835592b0f4de8d90d12112
+
+2022-02-24 GDB Administrator <gdbadmin@sourceware.org>
+
+ Automatic date update in version.in
+
+2022-02-23 Tom Tromey <tromey@adacore.com>
+
+ Fix bug in C++ overload resolution
+ PR c++/28901 points out a bug in C++ overload resolution. When
+ comparing two overloads, one might be better than the other for
+ certain parameters -- but, if that one also has some invalid
+ conversion, then it should never be considered the better choice.
+ Instead, a valid-but-not-apparently-quite-as-good overload should be
+ preferred.
+
+ This patch fixes this problem by changing how overload comparisons are
+ done. I don't believe it should affect any currently valid overload
+ resolution; nor should it affect resolutions where all the choices are
+ equally invalid.
+
+2022-02-23 Dominik 'Disconnect3d' Czarnota <dominik.b.czarnota@gmail.com>
+
+ gdb/linux-tdep.c: Add Perms to the 'info proc mappings' output
+ Fixes #28914 and so it adds a 'Perms' (permissions) column to the
+ 'info proc mappings' command output. This will allow users to know
+ the memory pages permissions right away from GDB instead of having
+ to fetch them from the /proc/$pid/maps file (which is also what GDB
+ does internally, but it just did not print that column).
+
+ Below I am also showing how an example output looks like before and
+ after this commit in case someone wonders.
+
+ On i386 targets - before this commit:
+ ```
+ (gdb) info proc mappings
+ process 3461464
+ Mapped address spaces:
+
+ Start Addr End Addr Size Offset objfile
+ 0x56555000 0x56556000 0x1000 0x0 /home/dc/src/binutils-gdb/build/a.out
+ 0x56556000 0x56557000 0x1000 0x1000 /home/dc/src/binutils-gdb/build/a.out
+ 0x56557000 0x56558000 0x1000 0x2000 /home/dc/src/binutils-gdb/build/a.out
+ 0x56558000 0x5655a000 0x2000 0x2000 /home/dc/src/binutils-gdb/build/a.out
+ 0xf7fc4000 0xf7fc8000 0x4000 0x0 [vvar]
+ 0xf7fc8000 0xf7fca000 0x2000 0x0 [vdso]
+ 0xf7fca000 0xf7fcb000 0x1000 0x0 /usr/lib/i386-linux-gnu/ld-2.33.so
+ 0xf7fcb000 0xf7fee000 0x23000 0x1000 /usr/lib/i386-linux-gnu/ld-2.33.so
+ 0xf7fee000 0xf7ffb000 0xd000 0x24000 /usr/lib/i386-linux-gnu/ld-2.33.so
+ 0xf7ffb000 0xf7ffe000 0x3000 0x30000 /usr/lib/i386-linux-gnu/ld-2.33.so
+ 0xfffdc000 0xffffe000 0x22000 0x0 [stack]
+ (gdb)
+ ```
+
+ On i386 targets - after this commit:
+ ```
+ (gdb) info proc mappings
+ process 3461464
+ Mapped address spaces:
+
+ Start Addr End Addr Perms Size Offset objfile
+ 0x56555000 0x56556000 r--p 0x1000 0x0 /home/dc/src/binutils-gdb/build/a.out
+ 0x56556000 0x56557000 r-xp 0x1000 0x1000 /home/dc/src/binutils-gdb/build/a.out
+ 0x56557000 0x56558000 r--p 0x1000 0x2000 /home/dc/src/binutils-gdb/build/a.out
+ 0x56558000 0x5655a000 rw-p 0x2000 0x2000 /home/dc/src/binutils-gdb/build/a.out
+ 0xf7fc4000 0xf7fc8000 r--p 0x4000 0x0 [vvar]
+ 0xf7fc8000 0xf7fca000 r-xp 0x2000 0x0 [vdso]
+ 0xf7fca000 0xf7fcb000 r--p 0x1000 0x0 /usr/lib/i386-linux-gnu/ld-2.33.so
+ 0xf7fcb000 0xf7fee000 r-xp 0x23000 0x1000 /usr/lib/i386-linux-gnu/ld-2.33.so
+ 0xf7fee000 0xf7ffb000 r--p 0xd000 0x24000 /usr/lib/i386-linux-gnu/ld-2.33.so
+ 0xf7ffb000 0xf7ffe000 rw-p 0x3000 0x30000 /usr/lib/i386-linux-gnu/ld-2.33.so
+ 0xfffdc000 0xffffe000 rw-p 0x22000 0x0 [stack]
+ (gdb)
+ ```
+
+ On amd64 targets - after this commit:
+ ```
+ (gdb) info proc mappings
+ process 3461869
+ Mapped address spaces:
+
+ Start Addr End Addr Perms Size Offset objfile
+ 0x555555554000 0x555555555000 r--p 0x1000 0x0 /home/dc/src/binutils-gdb/build/a.out
+ 0x555555555000 0x555555556000 r-xp 0x1000 0x1000 /home/dc/src/binutils-gdb/build/a.out
+ 0x555555556000 0x555555557000 r--p 0x1000 0x2000 /home/dc/src/binutils-gdb/build/a.out
+ 0x555555557000 0x555555559000 rw-p 0x2000 0x2000 /home/dc/src/binutils-gdb/build/a.out
+ 0x7ffff7fc3000 0x7ffff7fc7000 r--p 0x4000 0x0 [vvar]
+ 0x7ffff7fc7000 0x7ffff7fc9000 r-xp 0x2000 0x0 [vdso]
+ 0x7ffff7fc9000 0x7ffff7fca000 r--p 0x1000 0x0 /usr/lib/x86_64-linux-gnu/ld-2.33.so
+ 0x7ffff7fca000 0x7ffff7ff1000 r-xp 0x27000 0x1000 /usr/lib/x86_64-linux-gnu/ld-2.33.so
+ 0x7ffff7ff1000 0x7ffff7ffb000 r--p 0xa000 0x28000 /usr/lib/x86_64-linux-gnu/ld-2.33.so
+ 0x7ffff7ffb000 0x7ffff7fff000 rw-p 0x4000 0x31000 /usr/lib/x86_64-linux-gnu/ld-2.33.so
+ 0x7ffffffdd000 0x7ffffffff000 rw-p 0x22000 0x0 [stack]
+ 0xffffffffff600000 0xffffffffff601000 --xp 0x1000 0x0 [vsyscall]
+ (gdb)
+ ```
+
+ Change-Id: I4991f6cc758cd532eae3ae98c29d22e7bd9d9c36
+
+2022-02-23 Patrick O'Neill <patrick@rivosinc.com>
+
+ RISC-V: PR28733, add missing extension info to 'unrecognized opcode' error
+ Currently we report errors as "unrecognized opcode `fence.i'" when the
+ opcode isn't part of the selected extensions.
+ This patch expands that error message to include the missing extension
+ information. For example, now the error message would be "unrecognized
+ opcode `fence.i', extension `zifencei' required".
+ If the opcode is not a part of any extension, the error message reverts
+ to "unrecognized opcode `<op statement>'".
+
+
+ bfd/
+ pr 28733
+ * elfxx-riscv.c (riscv_multi_subset_supports_ext): New function,
+ used to return the extension string for each INSN_CLASS_*.
+ * elfxx-riscv.h: Added extern riscv_multi_subset_supports_ext.
+ gas/
+ pr 28733
+ * config/tc-riscv.c (struct riscv_ip_error): New structure,
+ contains information about errors that occur within the riscv_ip.
+ (riscv_ip): Use struct riscv_ip_error to report more detailed errors.
+ * testsuite/gas/riscv/c-fld-fsd-fail.l: Updated.
+ * testsuite/gas/riscv/march-imply-i2p1-01.: Likewise.
+
+2022-02-23 Patrick O'Neill <patrick@rivosinc.com>
+
+ RISC-V: PR28733, add missing extension info to 'invalid CSR' error
+ Currently we report errors as "invalid CSR 'fscr' for the current ISA"
+ when the instruction isn't valid.
+
+ This patch expands that error message to include the missing extension
+ information. For example, now the error message would be "invalid CSR
+ 'fscr' for the current ISA, CSR 'fscr' needs 'f' extension".
+
+
+ gas/
+ pr 28733
+ * config/tc-riscv.c (riscv_csr_address): Report more details
+ when the CSR is invalid.
+ * testsuite/gas/riscv/csr-version-1p10.l: Updated detailed errors.
+ * testsuite/gas/riscv/csr-version-1p11.l: Likewise.
+ * testsuite/gas/riscv/csr-version-1p12.l: Likewise.
+ * testsuite/gas/riscv/csr-version-1p9p1.l: Likewise.
+
+2022-02-23 Alan Modra <amodra@gmail.com>
+
+ binutils 2.38 vs. ppc32 linux kernel
+ Commit b25f942e18d6 made .machine more strict. Weaken it again.
+
+ * config/tc-ppc.c (ppc_machine): Treat an early .machine specially,
+ keeping sticky options to work around gcc bugs.
+
+2022-02-23 Nelson Chu <nelson.chu@sifive.com>
+
+ RISC-V: Updated CSRs to privileged spec v1.12 and debug spec v1.0.
+ * Removed N extension CSRs,
+ ustatus, uie, utvec, uscratch, uepc, ucause, utval and uip.
+
+ * Removed two supervisor CSRs,
+ sedeleg and sideleg.
+
+ * Changed debug CSR address of scontext from 0x7aa to 0x5a8. We cannot support
+ different versions of debug specs for now, so only supporting the latest one is
+ the only way to move forward.
+
+ * Added debug CSRs,
+ mscontext (0x7aa), mcontrol6 (0x7a1, tdata1) and tmexttrigger ((0x7a1, tdata1).
+
+ * Regarded hcontext as a debug CSR.
+
+ include/
+ * opcode/riscv-opc.h: Updated CSRs to privileged spec v1.12 and
+ debug spec v1.0.
+ gas/
+ * testsuite/gas/riscv/csr.s: Updated CSRs to privileged spec v1.12
+ and debug spec v1.0.
+ * testsuite/gas/riscv/csr-dw-regnums.d: Likewise.
+ * testsuite/gas/riscv/csr-version-1p10.d: Likewise.
+ * testsuite/gas/riscv/csr-version-1p10.l: Likewise.
+ * testsuite/gas/riscv/csr-version-1p11.d: Likewise.
+ * testsuite/gas/riscv/csr-version-1p11.l: Likewise.
+ * testsuite/gas/riscv/csr-version-1p12.d: Likewise.
+ * testsuite/gas/riscv/csr-version-1p12.l: Likewise.
+ * testsuite/gas/riscv/csr-version-1p9p1.d: Likewise.
+ * testsuite/gas/riscv/csr-version-1p9p1.l: Likewise.
+ * testsuite/gas/riscv/csr-dw-regnums.d: Likewise.
+ * testsuite/gas/riscv/csr-dw-regnums.s: Likewise.
+
+2022-02-23 Tsukasa OI <research_trasio@irq.a4lg.com>
+
+ RISC-V: Add Privileged Architecture 1.12 CSRs
+ This commit adds,
+
+ * Most of CSRs as listed in the Privileged Architecture,
+ version 1.12 (except scontext and mscontext).
+
+ * Testcases for most CSRs added on the Privileged
+ Architecture, version 1.12 (except moved "scontext" and
+ new "mscontext").
+
+ include/ChangeLog:
+
+ * opcode/riscv-opc.h (CSR_SENVCFG, CSR_MCONFIGPTR, CSR_MENVCFG,
+ CSR_MSTATUSH, CSR_MENVCFGH, CSR_MTINST, CSR_MTVAL2, CSR_MSECCFG,
+ CSR_MSECCFGH, CSR_PMPCFG4, CSR_PMPCFG5, CSR_PMPCFG6,
+ CSR_PMPCFG7, CSR_PMPCFG8, CSR_PMPCFG9, CSR_PMPCFG10,
+ CSR_PMPCFG11, CSR_PMPCFG12, CSR_PMPCFG13, CSR_PMPCFG14,
+ CSR_PMPCFG15, CSR_PMPADDR16, CSR_PMPADDR17, CSR_PMPADDR18,
+ CSR_PMPADDR19, CSR_PMPADDR20, CSR_PMPADDR21, CSR_PMPADDR22,
+ CSR_PMPADDR23, CSR_PMPADDR24, CSR_PMPADDR25, CSR_PMPADDR26,
+ CSR_PMPADDR27, CSR_PMPADDR28, CSR_PMPADDR29, CSR_PMPADDR30,
+ CSR_PMPADDR31, CSR_PMPADDR32, CSR_PMPADDR33, CSR_PMPADDR34,
+ CSR_PMPADDR35, CSR_PMPADDR36, CSR_PMPADDR37, CSR_PMPADDR38,
+ CSR_PMPADDR39, CSR_PMPADDR40, CSR_PMPADDR41, CSR_PMPADDR42,
+ CSR_PMPADDR43, CSR_PMPADDR44, CSR_PMPADDR45, CSR_PMPADDR46,
+ CSR_PMPADDR47, CSR_PMPADDR48, CSR_PMPADDR49, CSR_PMPADDR50,
+ CSR_PMPADDR51, CSR_PMPADDR52, CSR_PMPADDR53, CSR_PMPADDR54,
+ CSR_PMPADDR55, CSR_PMPADDR56, CSR_PMPADDR57, CSR_PMPADDR58,
+ CSR_PMPADDR59, CSR_PMPADDR60, CSR_PMPADDR61, CSR_PMPADDR62,
+ CSR_PMPADDR63): New CSR macros.
+
+ gas/ChangeLog:
+
+ * testsuite/gas/riscv/csr-dw-regnums.s: Add new CSRs.
+ * testsuite/gas/riscv/csr-dw-regnums.d: Likewise.
+ * testsuite/gas/riscv/csr.s: Add new CSRs.
+ * testsuite/gas/riscv/csr-version-1p9p1.d: Likewise.
+ * testsuite/gas/riscv/csr-version-1p9p1.l: Likewise.
+ * testsuite/gas/riscv/csr-version-1p10.d: Likewise.
+ * testsuite/gas/riscv/csr-version-1p10.l: Likewise.
+ * testsuite/gas/riscv/csr-version-1p11.d: Likewise.
+ * testsuite/gas/riscv/csr-version-1p11.l: Likewise.
+ * testsuite/gas/riscv/csr-version-1p12.d: Likewise.
+ * testsuite/gas/riscv/csr-version-1p12.l: Likewise.
+
+2022-02-23 Tsukasa OI <research_trasio@irq.a4lg.com>
+
+ RISC-V: Reorganize testcases for CFI directives
+ This commit reorganizes and adds some CSRs to csr-dw-regnums.[sd] to
+ make it test the same CSRs as csr.s.
+
+ gas/ChangeLog:
+
+ * testsuite/gas/riscv/csr-dw-regnums.s: Reorganize and add
+ defined CSRs tested in csr.s.
+ * testsuite/gas/riscv/csr-dw-regnums.d: Likewise.
+
+2022-02-23 GDB Administrator <gdbadmin@sourceware.org>
+
+ Automatic date update in version.in
+
+2022-02-22 John Baldwin <jhb@FreeBSD.org>
+
+ NEWS: Note that the FreeBSD async target supports async mode.
+
+2022-02-22 John Baldwin <jhb@FreeBSD.org>
+
+ inf-ptrace: Add an event_pipe to be used for async mode in subclasses.
+ Subclasses of inf_ptrace_target have to opt-in to using the event_pipe
+ by implementing the can_async_p and async methods. For subclasses
+ which do this, inf_ptrace_target provides is_async_p, async_wait_fd
+ and closes the pipe in the close target method.
+
+ inf_ptrace_target also provides wrapper routines around the event pipe
+ (async_file_open, async_file_close, async_file_flush, and
+ async_file_mark) for use in target methods such as async.
+ inf_ptrace_target also exports a static async_file_mark_if_open
+ function which can be used in SIGCHLD signal handlers.
+
+2022-02-22 John Baldwin <jhb@FreeBSD.org>
+
+ Enable async mode in the target in attach_cmd.
+ If the attach target supports async mode, enable it after the
+ attach target's ::attach method returns.
+
+ fbsd-nat: Return nullptr rather than failing ::thread_name.
+ ptrace on FreeBSD cannot be used against running processes and instead
+ fails with EBUSY. This meant that 'info threads' would fail if any of
+ the threads were running (for example when using schedule-multiple=on
+ in gdb.base/fork-running-state.exp). Instead of throwing errors, just
+ return nullptr as no thread name is better than causing info threads to
+ fail completely.
+
+2022-02-22 John Baldwin <jhb@FreeBSD.org>
+
+ fbsd-nat: Various cleanups to the ::resume entry debug message.
+ Move the message from 'show debug fbsd-lwp' to 'show debug fbsd-nat'
+ since it is helpful for debugging async target support and not just
+ LWP support.
+
+ Use target_pid_to_str to format the ptid and log the step and signo
+ arguments.
+
+2022-02-22 John Baldwin <jhb@FreeBSD.org>
+
+ fbsd-nat: Include ptrace operation in error messages.
+
+2022-02-22 John Baldwin <jhb@FreeBSD.org>
+
+ fbsd-nat: Implement async target support.
+ This is a fairly simple version of async target support.
+
+ Synchronous mode still uses blocking waitpid() calls in
+ inf_ptrace::wait() unlike the Linux native target which always uses
+ WNOHANG and uses sigsuspend() for synchronous operation.
+
+ Asynchronous mode registers an event pipe with the core as a file
+ handle and writes to the pipe when SIGCHLD is raised. TARGET_WNOHANG
+ is handled by inf_ptrace::wait().
+
+2022-02-22 John Baldwin <jhb@FreeBSD.org>
+
+ inf-ptrace: Support async targets in inf_ptrace_target::wait.
+ - Handle TARGET_WNOHANG by passing WNOHANG to waitpid and returning
+ TARGET_WAITKIND_IGNORE if there are no events to report.
+
+ - Handle a race in async mode where SIGCHLD might signal the event
+ pipe for an event that has already been reported. If the event was
+ the exit of the last child process, waitpid() will fail with ECHILD
+ rather than returning a pid of 0. For this case, return
+ TARGET_WAITKIND_NO_RESUMED.
+
+2022-02-22 John Baldwin <jhb@FreeBSD.org>
+
+ inf-ptrace: Return an IGNORE event if waitpid() fails.
+ Previously this returned a TARGET_WAITKIND_SIGNALLED event for
+ inferior_ptid. However, inferior_ptid is invalid during ::wait()
+ methods after the multi-target changes, so this was triggering an
+ assertion further up the stack.
+
+ do_target_wait_1: Clear TARGET_WNOHANG if the target isn't async.
+ Previously, TARGET_WNOHANG was cleared if a target supported async
+ mode even if async mode wasn't currently enabled. This change only
+ permits TARGET_WNOHANG if async mode is enabled.
+
+2022-02-22 John Baldwin <jhb@FreeBSD.org>
+
+ Don't enable async mode at the end of target ::resume methods.
+ Now that target_resume always enables async mode after target::resume
+ returns, these calls are redundant.
+
+ The other place that target resume methods are invoked outside of
+ target_resume are as the beneath target in record_full_wait_1. In
+ this case, async mode should already be enabled when supported by the
+ target before the resume method is invoked due to the following:
+
+ In general, targets which support async mode run as async until
+ ::wait returns TARGET_WAITKIND_NO_RESUMED to indicate that there are
+ no unwaited for children (either they have exited or are stopped).
+ When that occurs, the loop in wait_one disables async mode. Later
+ if a stopped child is resumed, async mode is re-enabled in
+ do_target_resume before waiting for the next event.
+
+ In the case of record_full_wait_1, this function is invoked from the
+ ::wait target method when fetching an event. If the underlying
+ target supports async mode, then an earlier call to do_target_resume
+ to resume the child reporting an event in the loop in
+ record_full_wait_1 would have already enabled async mode before
+ ::wait was invoked. In addition, nothing in the code executed in
+ the loop in record_full_wait_1 disables async mode. Async mode is
+ only disabled higher in the call stack in wait_one after ::wait
+ returns.
+
+ It is also true that async mode can be disabled by an
+ INF_EXEC_COMPLETE event passed to inferior_event_handle, but all of
+ the places that invoke that are in the gdb core which is "above" a
+ target ::wait method.
+
+ Note that there is an earlier call to enable async mode in
+ linux_nat_target::resume. That call also marks the async event pipe
+ to report an existing event after enabling async mode, so it needs to
+ stay.
+
+2022-02-22 John Baldwin <jhb@FreeBSD.org>
+
+ Enable async mode on supported targets in target_resume.
+ Enabling async mode above the target layer removes duplicate code in
+ ::resume methods of async-capable targets. Commit 5b6d1e4fa4f
+ ("Multi-target support") enabled async mode in do_target_resume after
+ target_resume returns which is a step in this direction. However,
+ other callers of target_resume such as target_continue do not enable
+ async mode. Rather than enabling async mode in each of the callers
+ after target_resume returns, enable async mode at the end of
+ target_resume.
+
+ gdbserver linux-low: Convert linux_event_pipe to the event_pipe class.
+ Use event_pipe from gdbsupport in place of the existing file
+ descriptor array.
+
+ gdb linux-nat: Convert linux_nat_event_pipe to the event_pipe class.
+ Use event_pipe from gdbsupport in place of the existing file
+ descriptor array.
+
+2022-02-22 John Baldwin <jhb@FreeBSD.org>
+
+ gdbsupport: Add an event-pipe class.
+ This pulls out the implementation of an event pipe used to implement
+ target async support in both linux-low.cc (gdbserver) and linux-nat.c
+ (gdb).
+
+ This will be used to replace the existing event pipe in linux-low.cc
+ and linux-nat.c in future commits.
+
+ Co-Authored-By: Lancelot SIX <lsix@lancelotsix.com>
+
+2022-02-22 Ruslan Kabatsayev <b7.10110111@gmail.com>
+
+ gdb: fix detection of compilation and linking flags for source-highlight
+ Currently there are two problems with the detection of
+ source-highlight via pkg-config in GDB's configure script:
+
+ 1. The LDFLAGS variable is used to pass the 'pkg-config --libs' output
+ to AC_LINK_IFELSE, which results in the "-L/some/path
+ -lsource-highlight" preceding the conftest.cpp, which can result in a
+ failure to find symbols referenced in conftest.cpp, if the linker is
+ using --as-needed by default.
+
+ 2. The CFLAGS variable is used to pass the 'pkg-config --cflags'
+ output to AC_LINK_IFELSE. However, as the current language is C++,
+ AC_LINK_IFELSE will actuall use CXXFLAGS, not CFLAGS, so any flags
+ returned from pkg-config will not be seen.
+
+ This patch fixes both of these mistakes, allowing GDB to correctly
+ configure and build using source-highlight installed into a custom
+ prefix, e.g. ~/opt/gdb-git (because the system version of
+ source-highlight is too old).
+
+2022-02-22 Philippe Blain <levraiphilippeblain@gmail.com>
+
+ gdb/testsuite/README: point to default value of INTERNAL_GDBFLAGS
+ The INTERNAL_GDBFLAGS runtest variable was updated in 55c3ad88013
+ ([gdb/testsuite] Prevent pagination in GDB_INTERNALFLAGS, 2020-10-26) to
+ disable pagination, and in aae1c79a03a (PR python/12227..., 2010-12-07)
+ to point to the data directory, but its default value mentioned in the
+ testsuite's README was not kept up to date.
+
+ To avoid it getting out of sync even more, point the reader to the
+ definition of the variable in lib/gdb.exp, and move the explanation of
+ the different flags there. Also adjust the example in the README
+ so it follows the flags added in 55c3ad88013.
+
+ Change-Id: I3533608a7d6ae5198af09c7dc7743bde24c19ed7
+
+2022-02-22 Kito Cheng <kito.cheng@sifive.com>
+
+ RISC-V: Maintain a string to hold the canonical order
+ Using dummy entry in riscv_supported_std_ext cause confusing and wrongly
+ support `b` and `k` extensions.
+
+ bfd/
+ * elfxx-riscv.c (riscv_supported_std_ext): Drop unsupported
+ extensions.
+ (riscv_ext_canonical_order): New.
+ (riscv_init_ext_order): Use riscv_ext_canonical_order rather
+ than riscv_supported_std_ext to compute canonical order.
+
+ V2 Changes:
+
+ - Use `*ext` rather than `*ext != NULL` for checking is reach end of
+ string.
+
+2022-02-22 GDB Administrator <gdbadmin@sourceware.org>
+
+ Automatic date update in version.in
+
+2022-02-21 Alan Modra <amodra@gmail.com>
+
+ Re: ld: Support customized output section type
+ "DO NOT EDIT!" says the comment at the top of bfd-in2.h. Move the new
+ type field where it belongs.
+
+ PR ld/28841
+ * section.c (struct bfd_section): Add type. Formatting.
+ (BFD_FAKE_SECTION): Formatting.
+ * bfd-in2.h: Regenerate.
+
+2022-02-21 Mike Frysinger <vapier@gentoo.org>
+
+ sim: gdbinit: hoist setup to common code
+ This was left in subdirs because of the dynamic cgen usage. However,
+ we can move this breakpoint call to runtime and let gdb detect whether
+ the symbol exists.
+
+2022-02-21 Andrew Burgess <aburgess@redhat.com>
+
+ gdb/testsuite: relax pattern in new gdb.mi/mi-multi-commands.exp test
+ I saw some failures in the test gdb.mi/mi-multi-commands.exp that I
+ added recently. This test was added in commit:
+
+ commit d08cbc5d3203118da5583296e49273cf82378042
+ Date: Wed Dec 22 12:57:44 2021 +0000
+
+ gdb: unbuffer all input streams when not using readline
+
+ The failures I see only occurred when my machine was very heavily
+ loaded.
+
+ In this test I send multiple commands from dejagnu to gdb with a
+ single send_gdb call. In a well behaving world what I want to happen
+ is that the gdb console sees both commands arrive and echos the text
+ of those commands. Then gdb starts processing the first command,
+ prints the result, and then processes the second command, and prints
+ the result.
+
+ However, what I saw in my loaded environment was that only after
+ sending the two commands, only the first command was echoed to gdb's
+ terminal. Then gdb started processing the first command, and started
+ to write the output. Now, mixed in with the first command output, the
+ second command was echoed to gdb's terminal. Finally, gdb would
+ finish printing the first command output, and would read and handle
+ the second command.
+
+ This mixing of command echoing with the first command output was
+ causing the test matching patterns to fail.
+
+ In this commit I change the command I use in the test from a CLI
+ command to an MI command, this reduces the number of lines of output
+ that come from the test, CLI commands sent through the MI interpreter
+ are echoed back like this:
+
+ (gdb)
+ set $a = "FIRST COMMAND"
+ &"set $a = \"FIRST COMMAND\"\n"
+ ^done
+ (gdb)
+
+ While this is not the case for true MI command:
+
+ (gdb)
+ -data-evaluate-expression $a
+ ^done,value="\"FIRST COMMAND\""
+ (gdb)
+
+ Less output makes for simpler patterns to match against.
+
+ Next, when sending two command to gdb I was previously trying to spot
+ the output of the first command followed by the prompt with nothing
+ between. This is not really needed, for the first command I can look
+ for just the ^done,value="\"FIRST COMMAND\"" string, then I can start
+ looking for the output of the second command.
+
+ So long as the second pattern matches up to the gdb prompt, then I can
+ be sure than nothing is left over in the expect buffer to muck up
+ later matches.
+
+ As to see the second command output gdb must have read in the second
+ command, the second command output never suffers from the corruption
+ that the first command output does.
+
+ Since making this change, I've not seen a failure in this test.
+
+2022-02-21 Andrew Burgess <aburgess@redhat.com>
+
+ gdb: avoid nullptr access in dbxread.c from read_dbx_symtab
+ This fixes a GDB crash reported in bug pr/28900, related to reading in
+ some stabs debug information.
+
+ In this commit my goal is to stop GDB crashing. I am not trying to
+ ensure that GDB makes the best possible use of the available stabs
+ debug information. At this point I consider stabs a legacy debug
+ format, with only limited support in GDB.
+
+ So, the problem appears to be that, when reading in the stabs data, we
+ need to find a N_SO entry, this is the entry that defines the start of
+ a compilation unit (or at least the location of a corresponding source
+ file).
+
+ It is while handling an N_SO that GDB creates a psymtab to hold the
+ incoming debug information (symbols, etc).
+
+ The problem we hit in the bug is that we encounter some symbol
+ information (an N_PC entry) outside of an N_SO entry - that is we find
+ some symbol information that is not associated with any source file.
+
+ We already have some protection for this case, look (in
+ read_dbx_symtab) at the handling of N_PC entries of type 'F' and 'f',
+ if we have no psymtab (the pst variable is nullptr) then we issue a
+ complaint. However, for whatever reason, in both 'f' and 'F'
+ handling, there is one place where we assume that the pst
+ variable (the psymtab) is not nullptr. This is a mistake.
+
+ In this commit, I guard these two locations (in 'f' and 'F' handling)
+ so we no longer assume pst is not nullptr.
+
+ While I was at it, I audited all the other uses of pst in
+ read_dbx_symtab, and in every potentially dangerous case I added a
+ nullptr check, and issue a suitable complaint if pst is found to be
+ nullptr.
+
+ It might well be true that we could/should do something smarter if we
+ see a debug symbol outside of an N_SO entry, and if anyone wanted to
+ do that work, they're welcome too. But this commit is just about
+ preventing the nullptr access, and the subsequent GDB crash.
+
+ I don't have any tests for this change, I have no idea how to generate
+ weird stabs data for testing. The original binary from the bug report
+ now loads just fine without GDB crashing.
+
+ Bug: https://sourceware.org/bugzilla/show_bug.cgi?id=28900
+
+2022-02-21 Andrew Burgess <aburgess@redhat.com>
+
+ gdb: make use of std::string in dbxread.c and xcoffread.c
+ While taking a look through dbxread.c I spotted a couple of places
+ where making use of std::string would remove the need for manual
+ memory allocation and memcpy.
+
+ During review Simon pointed out that the same code exists in
+ xcoffread.c, so I've applied the same fix there too.
+
+ There should be no user visible changes after this commit.
+
+2022-02-21 GDB Administrator <gdbadmin@sourceware.org>
+
+ Automatic date update in version.in
+
+2022-02-20 Lancelot SIX <lancelot.six@amd.com>
+
+ gdb: Only paginate for filtered output in fputs_maybe_filtered
+ A have had situation where a unfiltered output (done using
+ fputs_unfiltered) ended up triggering pagination. The backtrace for this was:
+
+ ...
+ #24 0x000055839377ee4e in check_async_event_handlers () at ../../gdb/async-event.c:335
+ #25 0x0000558394b67b57 in gdb_do_one_event () at ../../gdbsupport/event-loop.cc:216
+ #26 0x0000558394587454 in gdb_readline_wrapper (prompt=0x7ffd907712d0 "--Type <RET> for more, q to quit, c to continue without paging--") at ../../gdb/top.c:1148
+ #27 0x0000558394707270 in prompt_for_continue () at ../../gdb/utils.c:1438
+ #28 0x00005583947088b3 in fputs_maybe_filtered (linebuffer=0x60c0000f4000 " [...quite big message...]", stream=0x60300028e9d0, filter=0) at ../../gdb/utils.c:1752
+ #29 0x0000558394708e57 in fputs_unfiltered (linebuffer=0x60c0000f4000 " [...quite big message...]", stream=0x60300028e9d0) at ../../gdb/utils.c:1811
+ ...
+
+ This comes from what appears to be a oversight in fputs_maybe_filtered. This
+ function has a FILTER parameter which if true makes the function pause after
+ every screenful (i.e. triggers pagination).
+
+ The filter parameter is correctly used to guard the first place where
+ prompt_for_continue. There is a second place in the function which can call
+ prompt_for_continue, but is currently unguarded. I believe that this is an
+ oversight, this patch fixes that.
+
+ Tested on Linux-x86_64, no regression observed.
+
+ Change-Id: Iad8ffd50a87cf20077500878e2564b5a7dc81ece
+
+2022-02-20 GDB Administrator <gdbadmin@sourceware.org>
+
+ Automatic date update in version.in
+
+2022-02-19 Dominique Quatravaux <dominique.quatravaux@epfl.ch>
+
+ gdb/darwin: remove not-so-harmless spurious call to `wait4`
+ As seen in https://sourceware.org/bugzilla/show_bug.cgi?id=24069 this
+ code will typically wait4() a second time on the same process that was
+ already wait4()'d a few lines above. While this used to be
+ harmless/idempotent (when we assumed that the process already exited),
+ this now causes a deadlock in the WIFSTOPPED case.
+
+ The early (~2019) history of bug #24069 cautiously suggests to use
+ WNOHANG instead of outright deleting the call. However, tests on the
+ current version of Darwin (Big Sur) demonstrate that gdb runs just fine
+ without a redundant call to wait4(), as would be expected.
+ Notwithstanding the debatable value of conserving bug compatibility with
+ an OS release that is more than a decade old, there is scant evidence of
+ what that double-wait4() was supposed to achieve in the first place - A
+ cursory investigation with `git blame` pinpoints commits bb00b29d7802
+ and a80b95ba67e2 from the 2008-2009 era, but fails to answer the
+ "why" question conclusively.
+
+ Co-Authored-By: Philippe Blain <levraiphilippeblain@gmail.com>
+ Change-Id: Id4e4415d66d6ff6b3552b60d761693f17015e4a0
+
+2022-02-19 GDB Administrator <gdbadmin@sourceware.org>
+
+ Automatic date update in version.in
+
+2022-02-18 Tom Tromey <tromey@adacore.com>
+
+ Add constructor to bound_minimal_symbol
+ This adds a constructor to bound_minimal_symbol, to avoid a build
+ failure with clang that Simon pointed out.
+
+ I also took the opportunity to remove some redundant initializations,
+ and to change one use of push_back to emplace_back, as suggested by
+ Simon.
+
+2022-02-18 Roland McGrath <mcgrathr@google.com>
+
+ Fix typo in ld.texi
+ ld/
+ * ld.texi (Output Section Type): Fix typo in @code syntax.
+
+2022-02-18 Simon Marchi <simon.marchi@polymtl.ca>
+
+ gdb: remove newlines from some linux_nat_debug_printf calls
+ Change-Id: I80328fab7096221356864b5a4fb30858b48d2c10
+
+2022-02-18 GDB Administrator <gdbadmin@sourceware.org>
+
+ Automatic date update in version.in
+
+2022-02-17 Nick Clifton <nickc@redhat.com>
+
+ Updated Serbian translations for the bfd, gold, ld and opcodes directories
+
+2022-02-17 GDB Administrator <gdbadmin@sourceware.org>
+
+ Automatic date update in version.in
+
+2022-02-16 Fangrui Song <maskray@google.com>
+
+ ld: Support customized output section type
+ bfd/
+ PR ld/28841
+ * bfd-in2.h (struct bfd_section): Add type.
+ (discarded_section): Add field.
+ * elf.c (elf_fake_sections): Handle bfd_section::type.
+ * section.c (BFD_FAKE_SECTION): Add field.
+ * mri.c (mri_draw_tree): Update function call.
+
+ ld/
+ PR ld/28841
+ * ld.texi: Document new output section type.
+ * ldlex.l: Add new token TYPE.
+ * ldgram.y: Handle TYPE=exp.
+ * ldlang.h: Add type_section to list of section types.
+ * ldlang.c (lang_add_section): Handle type_section.
+ (map_input_to_output_sections): Handle type_section.
+ * testsuite/ld-scripts/output-section-types.t: Add tests.
+ * testsuite/ld-scripts/output-section-types.d: Update.
+
+2022-02-16 Andrew Burgess <aburgess@redhat.com>
+
+ gdb/tui: add a missing white space character
+ Just adds a missing space. There should be no user visible changes
+ after this commit.
+
+ gdb: convert callback_handler_installed from int to bool
+ Simple int to bool conversion on callback_handler_installed in
+ event-top.c. There should be no user visible changes after this
+ commit.
+
+2022-02-16 Alan Modra <amodra@gmail.com>
+
+ gas local label and dollar label handling
+ Much of the gas source and older BFD source use "long" for function
+ parameters and variables, when other types would be more appropriate.
+ This patch fixes one of those cases. Dollar labels and numeric local
+ labels do not need large numbers. Small positive itegers are usually
+ all that is required. Due to allowing longs, it was possible for
+ fb_label_name and dollar_label_name to overflow their buffers.
+
+ * symbols.c: Delete unnecessary forward declarations.
+ (dollar_labels, dollar_label_instances): Use unsigned int.
+ (dollar_label_defined, dollar_label_instance): Likewise.
+ (define_dollar_label): Likewise.
+ (fb_low_counter, fb_labels, fb_label_instances): Likewise.
+ (fb_label_instance_inc, fb_label_instance): Likewise.
+ (fb_label_count, fb_label_max): Make them size_t.
+ (dollar_label_name, fb_label_name): Rewrite using sprintf.
+ * symbols.h (dollar_label_defined): Update prototype.
+ (define_dollar_label, dollar_label_name): Likewise.
+ (fb_label_instance_inc, fb_label_name): Likewise.
+ * config/bfin-lex.l (yylex): Remove unnecessary casts.
+ * expr.c (integer_constant): Likewise.
+ * read.c (read_a_source_file): Limit numeric label range to int.
+
+2022-02-16 Alan Modra <amodra@gmail.com>
+
+ ubsan: s_app_line integer overflow
+ There are quite a few ubsan warnings in gas. This one disappears with
+ a code tidy.
+
+ * read.c (s_app_line): Rename 'l' to 'linenum'. Avoid ubsan
+ warning.
+
+2022-02-16 Alan Modra <amodra@gmail.com>
+
+ pe_ILF_make_a_symbol_reloc segfault
+ pei-aarch64-little apparently lacks support for BFD_RELOC_RVA.
+
+ * peicode.h (pe_ILF_make_a_symbol_reloc): Don't segfault on
+ NULL howto.
+
+2022-02-16 Alan Modra <amodra@gmail.com>
+
+ What to do when sh_addralign isn't a power of two
+ BFD generally doesn't handle anything but a power of two section
+ alignment, and ELF sh_addralign is required to be an integral power of
+ two (or zero) by the ELF spec. Of course this is ignored by fuzzers,
+ and because bfd_log2 rounds up, we can end up with alignment_power
+ being 32 on a 32-bit object or 64 on a 64-bit object. That then
+ triggers ubsan warnings in places like bfd_update_compression_header
+ where we want to convert from alignment_power back to an alignment.
+ I suppose we could reject object files that have non-compliant
+ sh_addralign, but I think it's also reasonable to use the greatest
+ power of two divisor of sh_addralign, ie. the rightmost 1 bit.
+
+ * elf.c (_bfd_elf_make_section_from_shdr): Use greatest power
+ of two divisor of sh_addralign.
+ (_bfd_elf_assign_file_position_for_section): Likewise.
+ (assign_file_positions_for_non_load_sections): Likewise.
+
+2022-02-16 Alan Modra <amodra@gmail.com>
+
+ asan: buffer overflow in vms-alpha.c
+ * vms-alpha.c (evax_bfd_print_dst): Sanity check another place
+ printing strings.
+
+ asan : use of uninitialized value in buffer_and_nest
+ * macro.c (buffer_and_nest): Don't read past end of string buffer.
+
+ asan: buffer overflow in peXXigen.c
+ * peXXigen.c (_bfd_XX_bfd_copy_private_bfd_data_common): Properly
+ sanity check DataDirectory[PE_DEBUG_DATA].Size.
+
+2022-02-16 Hans-Peter Nilsson <hp@axis.com>
+
+ sim/common: Improve sim_dump_memory head comment
+ As requested by Mike.
+
+ * sim-memopt.c: Improve head comment.
+
+2022-02-16 Hans-Peter Nilsson <hp@axis.com>
+
+ sim/testsuite/cris/c/stat3.c: Fix formatting nit
+ * c/stat3.c (main): Fix formatting nit.
+
+2022-02-16 Mike Frysinger <vapier@gentoo.org>
+
+ sim: testsuite: cleanup the istarget * logic
+ Now that the multitarget testing has settled, clean up the cases where
+ istarget * is used. This ends up being mostly style unindenting.
+
+2022-02-16 GDB Administrator <gdbadmin@sourceware.org>
+
+ Automatic date update in version.in
+
+2022-02-15 H.J. Lu <hjl.tools@gmail.com>
+
+ i386: Update I386_NEED_DYNAMIC_RELOC_TYPE_P for DT_TEXTREL
+ Update I386_NEED_DYNAMIC_RELOC_TYPE_P to allow R_386_TLS_IE for relocation
+ in read-only section.
+
+ bfd/
+
+ PR ld/28894
+ * elfxx-x86.h (I386_NEED_DYNAMIC_RELOC_TYPE_P): Allow
+ R_386_TLS_IE.
+
+ ld/
+ PR ld/28894
+ * testsuite/ld-i386/i386.exp: Run pr28894.
+ * testsuite/ld-i386/pr28894.d: New file.
+ * testsuite/ld-i386/pr28894.s: Likewise.
+
+2022-02-15 Hans-Peter Nilsson <hp@axis.com>
+
+ sim/testsuite: Default global_cc_os and global_cc_works properly
+ There was an omission on 3e6dc39ed7a8 "sim/testsuite: Set
+ global_cc_os also when no compiler is found"; global_cc_os
+ wasn't set for other than the primary target, which means
+ that the "unguarded" use of global_cc_os in
+ testsuite/cris/c/c.exp caused the dreaded "ERROR: can't read
+ "global_cc_os": no such variable" when e.g. configuring for
+ pru-elf and doing "make check-sim". Better initializing
+ both variables at the top to default values, rather than
+ adding another single 'set global_cc_os ""', to reduce the
+ risk of not setting them properly if or when that
+ if-statement-chain is made longer.
+
+ sim/testsuite:
+ * lib/sim-defs.exp (sim_init_toolchain): Default
+ global_cc_os and global_cc_works properly, before if-chain.
+
+2022-02-15 H.J. Lu <hjl.tools@gmail.com>
+
+ x86: Add has_sib to struct instr_info
+ Add has_sib to struct instr_info and use SIB info only if ins->has_sib
+ is true.
+
+ PR binutils/28892
+ * i386-dis.c (instr_info): Add has_sib.
+ (get_sib): Set has_sib.
+ (OP_E_memory): Replace havesib with ins->has_sib.
+ (OP_VEX): Use ins->sib.index only if ins->has_sib is true.
+
+2022-02-15 Lancelot SIX <lancelot.six@amd.com>
+
+ gdb: Respect the DW_CC_nocall attribute
+ It is possible for a compiler to optimize a function in a such ways that
+ the function does not follow the calling convention of the target. In
+ such situation, the compiler can use the DW_AT_calling_convention
+ attribute with the value DW_CC_nocall to tell the debugger that it is
+ unsafe to call the function. The DWARF5 standard states, in 3.3.1.1:
+
+ > If the value of the calling convention attribute is the constant
+ > DW_CC_nocall, the subroutine does not obey standard calling
+ > conventions, and it may not be safe for the debugger to call this
+ > subroutine.
+
+ Non standard calling convention can affect GDB's assumptions in multiple
+ ways, including how arguments are passed to the function, how values are
+ returned, and so on. For this reason, it is unsafe for GDB to try to do
+ the following operations on a function with marked with DW_CC_nocall:
+
+ - call / print an expression requiring the function to be evaluated,
+ - inspect the value a function returns using the 'finish' command,
+ - force the value returned by a function using the 'return' command.
+
+ This patch ensures that if a command which relies on GDB's knowledge of
+ the target's calling convention is used on a function marked nocall, GDB
+ prints an appropriate message to the user and does not proceed with the
+ operation which is unreliable.
+
+ Note that it is still possible for someone to use a vendor specific
+ value for the DW_AT_calling_convention attribute for example to indicate
+ the use of an alternative calling convention. This commit does not
+ prevent this, and target dependent code can be adjusted if one wanted to
+ support multiple calling conventions.
+
+ Tested on x86_64-Linux, with no regression observed.
+
+ Change-Id: I72970dae68234cb83edbc0cf71aa3d6002a4a540
+
+2022-02-15 Lancelot SIX <lancelot.six@amd.com>
+ Simon Marchi <simon.marchi@polymtl.ca>
+
+ gdb: add a symbol* argument to get_return_value
+ Add an argument to the get_return_value function to indicate the symbol
+ of the function the debuggee is returning from. This will be used by
+ the following patch.
+
+ Since the function return type can be deduced from the symbol remove the
+ value_type argument which becomes redundant.
+
+ No user visible change after this patch.
+
+ Tested on x86_64-linux.
+
+ Change-Id: Idf1279f1f7199f5022738a6679e0fa63fbd22edc
+
+2022-02-15 H.J. Lu <hjl.tools@gmail.com>
+
+ x86-64: Use MAXPAGESIZE for the relro segment alignment
+ Adjust x86-64 linker tests after reverting
+
+ commit 31b4d3a16f200bf04db8439a63b72bba7af4e1be
+ Author: Alan Modra <amodra@gmail.com>
+ Date: Thu Feb 3 08:57:47 2022 +1030
+
+ PR28824, relro security issues, x86 keep COMMONPAGESIZE relro
+
+ to use MAXPAGESIZE for the end of the relro segment alignment, like other
+ ELF targets.
+
+ * testsuite/ld-x86-64/plt-main-bnd.dd: Updated.
+ * testsuite/ld-x86-64/plt-main-ibt-x32.dd: Likewise.
+ * testsuite/ld-x86-64/plt-main-ibt.dd: Likewise.
+ * testsuite/ld-x86-64/pr14207.d: Likewise.
+ * testsuite/ld-x86-64/pr18176.d: Likewise.
+ * testsuite/ld-x86-64/pr20830a-now.d: Likewise.
+ * testsuite/ld-x86-64/pr20830a.d: Likewise.
+ * testsuite/ld-x86-64/pr20830b-now.d: Likewise.
+ * testsuite/ld-x86-64/pr20830b.d: Likewise.
+ * testsuite/ld-x86-64/pr21038a-now.d: Likewise.
+ * testsuite/ld-x86-64/pr21038a.d: Likewise.
+ * testsuite/ld-x86-64/pr21038b-now.d: Likewise.
+ * testsuite/ld-x86-64/pr21038b.d: Likewise.
+ * testsuite/ld-x86-64/pr21038c-now.d: Likewise.
+ * testsuite/ld-x86-64/pr21038c.d: Likewise.
+
+2022-02-15 H.J. Lu <hjl.tools@gmail.com>
+
+ Revert "PR28824, relro security issues, x86 keep COMMONPAGESIZE relro"
+ This reverts commit 31b4d3a16f200bf04db8439a63b72bba7af4e1be.
+
+2022-02-15 GDB Administrator <gdbadmin@sourceware.org>
+
+ Automatic date update in version.in
+
+2022-02-14 Hans-Peter Nilsson <hp@axis.com>
+
+ sim/testsuite/cris: If failing compilation, mark C tests as errors
+ ...when we know we have a working compiler. This will reduce
+ the risk of faulty edits by exposing them rather than hiding
+ them as "unresolved". It also harmonizes behavior with that of
+ run_sim_test.
+
+ * c/c.exp: Mark C tests failing compilation test errors.
+
+2022-02-14 Hans-Peter Nilsson <hp@axis.com>
+
+ sim/testsuite/cris: Remove faulty use of basename in C tests
+ Calls to basename were added here as part of commit
+ e1e1ae6e9b5e "sim: testsuite: fix objdir handling", but that
+ commit missed adding "#include <libgen.h>" or the equivalent
+ GNU extension, see basename(3). Fixing that shows a logical
+ error in the change to openpf1.c; the non-/-prefixed
+ code-path was changed instead of the "/"-prefixed code-path,
+ which is the one executed after that commit.
+
+ For "newlib" these tests failed linking after that commit.
+ Recent newlib has the (asm-renamed) GNU-extension-variant of
+ basename, but we're better off not using it at all.
+
+ Unfortunately, compilation failures for C tests run by the
+ machinery in c.exp are currently just marked "unresolved",
+ in contrast to C and assembler tests run by calling
+ run_sim_test.
+
+ The interaction of calling with the full program-path vs.
+ use of --sysroot exposes a consistency problem: when
+ --sysroot is used, argv[0] isn't the path by which the
+ program can find itself. It's undecided whether argv[0] for
+ the program running in the simulator should be edited
+ (related to the naked argument to the simulator before
+ passing on to the simulated program) to remove a leading
+ --sysroot. Either way, such a change would be out of scope
+ for this commit.
+
+ * c/stat3.c (mybasename): New macro. Use it instead of basename.
+ * c/openpf1.c: Correct basename-related change and update related
+ comment.
+
+2022-02-14 Hans-Peter Nilsson <hp@axis.com>
+
+ sim: Add sim_dump_memory for debugging
+ Intended to be called from the debugger tool.
+
+ sim/common:
+ * sim-memopt.c (sim_dump_memory): New function.
+
+2022-02-14 Hans-Peter Nilsson <hp@axis.com>
+
+ sim: Fix use of out-of-tree assembler and linker when testing
+ With commit 7a259895bb2d "sim: testsuite: expand arch specific
+ toolchain settings", trying to use out-of-tree ld and as at test-time
+ broke for the "primary target", like when testing a release-tarball.
+
+ Subsequent to that commit, all assembler tests without in-tree-built
+ tools FAIL, getting errors when trying to call
+ $(abs_builddir)/../gas/as-new. But, that isn't the actual culprint;
+ it's actually it's its immediate predecessor, commit 8996c21067373
+ "sim: testsuite: setup per-port toolchain settings for multitarget
+ build", which hardcodes in-tree-paths to those tools instead of
+ considering e.g. $(<X>_FOR_TARGET), the preferred overridable variable
+ for single-target builds, as set up by the toplevel Makefile.
+
+ This commit calls GCC_TARGET_TOOL (a deceptive name; gcc-specific
+ features aren't used) from toplev/config/acx.m4, somewhat like calls
+ in toplev/configure.ac but without the NCN_STRICT_CHECK_TARGET_TOOLS
+ step, for each X to find a value for $(<X>_FOR_TARGET). N.B.: in-tree
+ tools still override any ${target}-${tool} found in $PATH, i.e. only
+ previously broken builds are affected.
+
+ The variables $(<X>_FOR_TARGET) are usually overridden by the toplevel
+ Makefile to the same value or better, but has to be set here too, as
+ automake "wants" Makefiles to be self-contained (you get an error
+ pointing out that the variable may be empty). If it hadn't been for
+ that, SIM_AC_CHECK_TOOLCHAIN_FOR_PRIMARY_TARGET would not be needed.
+ This detail should only (positively) affect users invoking "make
+ check" in sim/ instead of "make check-sim" (or "make check") at the
+ toplevel. Now the output from "configure" matches the target tools
+ actually used by sim at test-time, for the "primary target".
+
+ Using $(CC) for "example-" targets CC_FOR_TARGET is not changed, as
+ that appears to be a deliberate special-case.
+
+ Note that all tools still have to be installed and present in
+ $PATH at configure-time to be properly used at test-time.
+
+ sim:
+ * m4/sim_ac_toolchain.m4 (SIM_AC_CHECK_TOOLCHAIN_FOR_PRIMARY_TARGET):
+ New defun.
+ (SIM_TOOLCHAIN_VARS): Call it using AC_REQUIRE, and use variables
+ AS_FOR_TARGET, LD_FOR_TARGET and CC_FOR_TARGET instead of hard-coded
+ values.
+ * Makefile.in, configure: Regenerate.
+
+2022-02-14 Hans-Peter Nilsson <hp@axis.com>
+
+ sim cris: Unbreak --disable-sim-hardware builds
+ With --disable-sim-hardware (--enable-sim-hardware=no),
+ whose default was changed to --enable-sim-hardware(=yes) in
+ commit 34cf51120683, building for cris-elf fails as
+ sim_hw_parse then doesn't exist.
+
+ A cris-elf simulator configured for --enable-sim-hardware
+ (or the default after to the mentioned commit) runs about
+ 2.5x slower than one configured --disable-sim-hardware.
+ A further 2-5% performance regression was not investigated.
+
+ When sim_hw_parse doesn't exist, --cris-900000xx can't be
+ supported. The best action here is to remove it completely,
+ so its absence can be identified through --help, but
+ avoiding littering the code with "#if WITH_HW".
+
+ sim/cris:
+ * sim-if.c (cris_options) [WITH_HW]: Conditionalize
+ support of option --cris-900000xx.
+ (sim_open) [WITH_HW]: Conditionalize sim_hw_parse
+ call.
+
+2022-02-14 Hans-Peter Nilsson <hp@axis.com>
+
+ sim/testsuite/cris: As applicable, require simoption --cris-900000xx
+ Apply the new run_sim_test option "require" as in "#require
+ simoption --cris-900000xx" for all tests using that option.
+ This allows a clean test-suite-run for a build with
+ --disable-sim-hardware, where that option is not supported,
+ by skipping those tests as "untested".
+
+ sim/testsuite/cris:
+ * asm/io1.ms, asm/io2.ms, asm/io3.ms, asm/io6.ms,
+ asm/io7.ms: Call "#require: simoption --cris-900000xx".
+
+2022-02-14 Hans-Peter Nilsson <hp@axis.com>
+
+ sim/testsuite: Support "requires: simoption <--name-of-option>"
+ Simulator features can be present or not, typically
+ depending on different-valued configure options, like
+ --enable-sim-hardware[=off|=on]. To avoid failures in
+ test-suite-runs when testing such configurations, a new
+ predicate is needed, as neither "target", "progos" nor
+ "mach" fits cleanly.
+
+ The immediate need was to check for presence of a simulator
+ option, but rather than a specialized "requires-simoption:"
+ predicate I thought I'd handle the general (parametrized)
+ need, so here's a generic predicate machinery and a (first)
+ predicate to use together with it; checking whether a
+ particular option is supported, by looking at "run --help"
+ output. This was inspired by the check_effective_target_
+ machinery in the gcc test-suite.
+
+ Multiple "requires: <requirement> <parameter>" form a list of
+ predicates (with parameters), to be used as a conjunction.
+
+ sim/testsuite:
+ * lib/sim-defs.exp (sim_check_requires_simoption): New function.
+ (run_sim_test): Support "requires: <requirement> <parameter>".
+
+2022-02-14 Hans-Peter Nilsson <hp@axis.com>
+
+ sim/testsuite/cris/hw/rv-n-cris/irq1.ms: Disable due to randomness
+ For reasons that remain largely to be investigated (besides
+ the apparent lack of synchronization between two processes),
+ this test fails randomly, with two different sets of common
+ outputs. Curiously, that doesn't happen for the other
+ similar tests. There's a comment that mentions this, though
+ that doesn't make it a sustainable part of a test-suite.
+ (Known-blinking tests should be disabled until fixed.)
+
+ sim/testsuite/cris:
+ * hw/rv-n-cris/irq1.ms: Disable by use of a never-matched
+ "progos" value.
+
+2022-02-14 Hans-Peter Nilsson <hp@axis.com>
+
+ sim/testsuite/cris/c: Use -sim3 but only for newlib targets
+ Commit a39487c6685f "sim: cris: use -sim with C tests for cris-elf
+ targets" caused " -sim" to be appended to CFLAGS_FOR_TARGET for
+ cris*-*-elf, where testing had until then relied on
+ "RUNTESTFLAGS=--target_board=cris-sim" being passed when running "make
+ check-sim", adding the right options. While "-sim" happens to work,
+ the baseboard-file cris-sim.exp uses "-sim3" so for consistency use
+ that instead.
+
+ Then commit b42f20d2ac72 "sim: testsuite: drop most specific istarget
+ checks" caused " -sim" to be appended for *all* targets, which just
+ doesn't work. For example, for crisv32-linux-gnu, that's not a
+ recognized option and will cause a dejagnu error and further testing
+ in c.exp will be aborted.
+
+ While cris-sim.exp appends "-static" for *-linux-gnu, further changes
+ in the test-suite have caused "linux"-specific tests to break, so that
+ part will be tended to separately.
+
+ But, save and restore CFLAGS_FOR_TARGET around the modification and
+ use where needed, to not have the CRIS-specific modification affect a
+ continuing test-run (possibly for other targets).
+
+ sim/testsuite/cris:
+ * c/c.exp (CFLAGS_FOR_TARGET): Replace appended option " -sim"
+ with " -sim3", but do it conditionally for newlib targets. Save
+ and restore CFLAGS_FOR_TARGET in saved_CFLAGS_FOR_TARGET such
+ that it doesn't affect the value of CFLAGS_FOR_TARGET outside
+ c.exp.
+
+2022-02-14 Hans-Peter Nilsson <hp@axis.com>
+
+ sim/testsuite: Set global_cc_os also when no compiler is found
+ If we don't set this variable, it doesn't exist, and using "#progos:"
+ in an assembler-file will cause an error rather than just skipping the
+ test, viz:
+
+ Running /src/sim/testsuite/cris/hw/rv-n-cris/rvc.exp ...
+ ERROR: tcl error sourcing /src/sim/testsuite/cris/hw/rv-n-cris/rvc.exp.
+ ERROR: can't read "global_cc_os": no such variable
+ while executing
+ "if { $opts(progos) != "" && $opts(progos) != $global_cc_os } {
+ untested $subdir/$name
+ return
+ }"
+ (procedure "run_sim_test" line 102)
+
+ Neither the commit introducing progos, nor the top comment
+ in run_sim_test, mentions progos as intended only for C
+ tests, or that its use must be gated on $global_cc_works !=
+ 0, so (not) setting it in the no-working-compiler path seems
+ just overlooked.
+
+ Allowing it to be used for assembler tests makes it usable
+ for e.g. an always-false predicate and in expressions in
+ .exp files without gating on $global_cc_works != 0.
+
+ With this patch, global_cc_os is set to "", just as for "unknown OS".
+
+ sim/testsuite:
+ * lib/sim-defs.exp (sim_init_toolchain): Set global_cc_os also when
+ no working target C compiler is found.
+
+2022-02-14 Hans-Peter Nilsson <hp@axis.com>
+
+ sim/testsuite/cris: Assembler testcase for PRIx32 usage bug
+ Several C test-cases exposed the bug, but let's have one for
+ people who test using just the assembler and linker.
+
+ * asm/endmem1.ms: New test.
+
+2022-02-14 Hans-Peter Nilsson <hp@axis.com>
+
+ sim cris: Correct PRIu32 to PRIx32
+ In 5ee0bc23a68f "sim: clean up bfd_vma printing" there was
+ an additional introduction of PRIx32 and PRIu32 but just in
+ sim/cris/sim-if.c. One type of bug was fixed in commit
+ d16ce6e4d581 "sim: cris: fix memory setup typos" but one
+ remained; the PRIu32 usage is wrong, as hex output is
+ desired; note the 0x prefix.
+
+ Without this fix, you'll see output like:
+ memory map 0:0x4000..0x5fff (8192 bytes) overlaps 0:0x0..0x16383 (91012 bytes)
+ program stopped with signal 6 (Aborted).
+ for some C programs, like some of the ones in the sim/cris/c
+ testsuite from where the example is taken (freopen2.c).
+
+ The bug behavior was with memory allocation. With an
+ attempt to allocate memory using the brk syscall such that
+ the room up to the next 8192-byte "page boundary" wasn't
+ sufficient, the simulator memory allocation machinery horked
+ on a consistency error when trying to allocate a memory
+ block to raise the "end of the data segment": there was
+ already memory allocated at that address.
+
+ Unfortunately, none of the programs in sim/cris/asm exposed
+ this bug at the time, but an assembler test-case is
+ committed after this fix.
+
+ sim/cris:
+ * sim-if.c (sim_open): Correct PRIu32 to PRIx32.
+
+2022-02-14 Sergei Trofimovich <siarheit@google.com>
+
+ microblaze: fix fsqrt collicion to build on glibc-2.35
+ * microblaze-opcm.h: Renamed 'fsqrt' to 'microblaze_fsqrt'.
+ * microblaze-opc.h: Follow 'fsqrt' rename.
+
+2022-02-14 Tom Tromey <tom@tromey.com>
+
+ Remove LA_PRINT_STRING
+ This removes the LA_PRINT_STRING macro, in favor of using ordinary
+ method calls.
+
+ Remove LA_PRINT_CHAR
+ This removes the LA_PRINT_CHAR macro, in favor of using ordinary
+ method calls.
+
+ Remove LA_PRINT_TYPE
+ This removes the LA_PRINT_TYPE macro, in favor of using ordinary
+ method calls.
+
+2022-02-14 Andrew Burgess <andrew.burgess@embecosm.com>
+
+ gdb/python: move styling support to gdb.styling
+ This commit moves the two Python functions that are used for styling
+ into a new module, gdb.styling, there's then a small update in
+ python.c so GDB can find the functions in their new location.
+
+ The motivation for this change is purely to try and reduce the clutter
+ in the top-level gdb module, and encapsulate related functions into
+ modules. I did ponder documenting these functions as part of the
+ Python API, however, doing so would effectively "fix" the API, and I'm
+ still wondering if there's improvements that could be made, also, the
+ colorize function is only called in some cases now that GDB prefers
+ libsource-highlight, so it's not entirely sure how this would work as
+ part of a user facing API.
+
+ Still, despite these functions never having been part of a documented
+ API, it is possible that a user out there has overridden these to, in
+ some way, customize how GDB performs styling. Moving the function as
+ I propose in this patch could break things for that user, however,
+ fixing this breakage is trivial, and, as these functions were never
+ documented, I don't think we should be obliged to not break user code
+ that relies on them.
+
+2022-02-14 Andrew Burgess <andrew.burgess@embecosm.com>
+
+ gdb: use python to colorize disassembler output
+ This commit adds styling support to the disassembler output, as such
+ two new commands are added to GDB:
+
+ set style disassembler enabled on|off
+ show style disassembler enabled
+
+ In this commit I make use of the Python Pygments package to provide
+ the styling. I did investigate making use of libsource-highlight,
+ however, I found the highlighting results to be inferior to those of
+ Pygments; only some mnemonics were highlighted, and highlighting of
+ register names such as r9d and r8d (on x86-64) was incorrect.
+
+ To enable disassembler highlighting via Pygments, I've added a new
+ extension language hook, which is then implemented for Python. This
+ hook is very similar to the existing hook for source code
+ colorization.
+
+ One possibly odd choice I made with the new hook is to pass a
+ gdb.Architecture through, even though this is currently unused. The
+ reason this argument is not used is that, currently, styling is
+ performed identically for all architectures.
+
+ However, even though the Python function used to perform styling of
+ disassembly output is not part of any documented API, I don't want
+ to close the door on a user overriding this function to provide
+ architecture specific styling. To do this, the user would inevitably
+ require access to the gdb.Architecture, and so I decided to add this
+ field now.
+
+ The styling is applied within gdb_disassembler::print_insn, to achieve
+ this, gdb_disassembler now writes its output into a temporary buffer,
+ styling is then applied to the contents of this buffer. Finally the
+ gdb_disassembler buffer is copied out to its final destination stream.
+
+ There's a new test to check that the disassembler output includes some
+ escape sequences, though I don't check for specific colours; the
+ precise colors will depend on which instructions are in the
+ disassembler output, and, I guess, how pygments is configured.
+
+ The only negative change with this commit is how we currently style
+ addresses in GDB.
+
+ Currently, when the disassembler wants to print an address, we call
+ back into GDB, and GDB prints the address value using the `address`
+ styling, and the symbol name using `function` styling. After this
+ commit, if pygments is used, then all disassembler styling is done
+ through pygments, and this include the address and symbol name parts
+ of the disassembler output.
+
+ I don't know how much of an issue this will be for people. There's
+ already some precedent for this in GDB when we look at source styling.
+ For example, function names in styled source listings are not styled
+ using the `function` style, but instead, either GNU Source Highlight,
+ or pygments gets to decide how the function name should be styled.
+
+ If the Python pygments library is not present then GDB will continue
+ to behave as it always has, the disassembler output is mostly
+ unstyled, but the address and symbols are styled using the `address`
+ and `function` styles, as they are today.
+
+ However, if the user does `set style disassembler enabled off`, then
+ all disassembler styling is switched off. This obviously covers the
+ use of pygments, but also includes the minimal styling done by GDB
+ when pygments is not available.
+
+2022-02-14 H.J. Lu <hjl.tools@gmail.com>
+
+ ld: Keep indirect symbol from IR if referenced from shared object
+ Don't change indirect symbol defined in IR to undefined if it is
+ referenced from shared object.
+
+ bfd/
+
+ PR ld/28879
+ * elflink.c (_bfd_elf_merge_symbol): Don't change indirect
+ symbol defined in IR to undefined if it is referenced from
+ shared object.
+
+ ld/
+
+ PR ld/28879
+ * testsuite/ld-plugin/lto.exp: Run PR ld/28879 tests.
+ * testsuite/ld-plugin/pr28879a.cc: New file.
+ * testsuite/ld-plugin/pr28879b.cc: Likewise.
+
+2022-02-14 GDB Administrator <gdbadmin@sourceware.org>
+
+ Automatic date update in version.in
+
+2022-02-13 Alan Modra <amodra@gmail.com>
+
+ PR28882, build failure with gcc-4.2 due to use of 0b literals
+ PR 28882
+ * elf/loongarch.h: Replace binary literals with hex.
+
+2022-02-13 Alan Modra <amodra@gmail.com>
+
+ Don't pass around expld.dataseg pointer
+ The better to see any code that accesses expld.dataseg.
+
+ * ldexp.c (fold_segment_end): Remove seg parameter. Adjust calls.
+ (fold_segment_align, fold_segment_relro_end): Likewise.
+ * ldlang.c (lang_size_segment): Likewise.
+ (lang_size_relro_segment_1, lang_find_relro_sections_1): Likewise.
+
+2022-02-13 Alan Modra <amodra@gmail.com>
+
+ Remove bfd ELF_RELROPAGESIZE
+ Now that ld properly aligns the end of the relro segment, the hack to
+ make relro work on powerpc can disappear.
+
+ bfd/
+ * bfd.c (bfd_emul_get_commonpagesize): Remove relro param.
+ Don't return bed->relropagesize.
+ * elf-bfd.h (struct elf_backend_data): Remove relropagesize.
+ * elfxx-target.h (ELF_RELROPAGESIZE): Remove.
+ * elf32-ppc.c (ELF_RELROPAGESIZE): Don't define.
+ * elf64-ppc.c: Likewise.
+ * bfd-in2.h: Regenerate.
+ ld/
+ * ldemul.c (after_parse_default): Adjust
+ bfd_emul_get_commonpagesize call.
+
+2022-02-13 Alan Modra <amodra@gmail.com>
+
+ PR28824, relro security issues, x86 keep COMMONPAGESIZE relro
+ x86 treats MAXPAGESIZE as a memory optimisation parameter, actual
+ hardware paging is always COMMPAGESIZE of 4k. Use COMMONPAGESIZE for
+ the end of the relro segment alignment.
+
+ The previous patch regresses pr18176, increasing the testcase file
+ size from 322208 to 2099872 bytes. Fixing this on x86 will require
+ introducing a gap after the end of the relro segment (of up to
+ relropagesize-1 bytes).
+
+ PR 28824
+ PR 18176
+ * ld.h (ld_config_type): Add relro_use_commonpagesize field.
+ * ldexp.c (fold_segment_align): Set relropagesize depending on
+ relro_use_commonpagesize.
+ * emultempl/elf-x86.em (elf_x86_create_output_section_statements):
+ Set relro_use_commonpagesize.
+ * testsuite/ld-x86-64/pr18176.d: xfail.
+
+2022-02-13 Alan Modra <amodra@gmail.com>
+
+ PR28824, relro security issues
+ Background
+ ==========
+ There are constraints on layout of binaries to meet demand paging and
+ memory protection requirements. Demand paged binaries must have file
+ offset mod pagesize equal to vma mod pagesize. Memory protection
+ (executable, read, write status) can only change at page boundaries.
+ The linker's MAXPAGESIZE variable gives the page size for these layout
+ constraints.
+
+ In a typical basic executable with two memory segments, text (RE) and
+ data (RW), the data segment must start on a different page to the
+ last text segment page. For example, with 64k pages and a small
+ executable of 48k text and 1k data, the text segment might start at
+ address 0x10000 and data at 0x20000 for a total of two 64k memory
+ pages. Demand paging would require the image on disk to be 64k+1k
+ in size. We can do better than that. If the data segment instead
+ starts at 0x2c000 (the end of the text segment plus one 64k page) then
+ there are still only two memory pages, but the disk image is now
+ smaller, 48k+1k in size. This is why the linker normally starts the
+ data segment at the end of the text segment plus one page. That
+ simple heuristic isn't ideal in all cases. Changing our simple
+ example to one with 64k-1 text size, following that heuristic would
+ result in data starting at 0x2ffff. Now we have two 64k memory data
+ pages for a data segment of 1k! If the data segment instead started
+ at 0x30000 we'd get a single data segment page at the cost of 1 byte
+ extra in the disk image, which is likely a good trade-off. So the
+ linker does adjust the simple heuristic. Just how much disk image
+ size increase is allowed is controlled by the linker's COMMONPAGESIZE
+ variable.
+
+ A PT_GNU_RELRO segment overlays the initial part of the data segment,
+ saying that those pages should be made read-only after relocation by
+ the dynamic loader. Page granularity for memory protection means that
+ the end of the relro segment must be at a page boundary.
+
+ The problem
+ ===========
+ Unfortunately most targets currently only align the end of the relro
+ segment to COMMONPAGESIZE. That results in only partial relro
+ protection if an executable is running with MAXPAGESIZE pages, since
+ any part of the relro segment past the last MAXPAGESIZE boundary can't
+ be made read-only without also affecting sections past the end of the
+ relro segment. I believe this problem arose because x86 always runs
+ with 4k (COMMPAGESIZE) memory pages, and therefore using a larger
+ MAXPAGESIZE on x86 is for reasons other than the demand paging and
+ memory page protection boundary requirements.
+
+ The solution
+ ============
+ Always end the relro segment on a MAXPAGESIZE boundary, except for
+ x86. Note that the relro segment, comprising of sections at the start
+ of the data segment, is sized according to how those sections are laid
+ out. That means the start of the relro segment is fixed relative to
+ its end. Which also means the start of the data segment must be at a
+ fixed address mod MAXPAGESIZE. So for relro the linker can't play
+ games with the start of the data segment to save disk space. At
+ least, not without introducing gaps between the relro sections. In
+ fact, because the linker was starting layout using its simple
+ heuristic of starting the data segment at the end of the text segment
+ plus one page, it was sometimes introducing page gaps for no reason.
+ See pr28743.
+
+ PR 28824
+ PR 28734
+ * ldexp.c (fold_segment_align): When relro, don't adjust up by
+ offset within page. Set relropagesize.
+ (fold_segment_relro_end): Align to relropagesize.
+ * ldexp.h (seg_align_type): Rename pagesize to commonpagesize.
+ Add relropagesize. Comment.
+ * ldlang.c (lang_size_segment): Adjust to suit field renaming.
+ (lang_size_relro_segment_1): Align relro_end using relropagesize.
+
+2022-02-13 GDB Administrator <gdbadmin@sourceware.org>
+
+ Automatic date update in version.in
+
+2022-02-12 GDB Administrator <gdbadmin@sourceware.org>
+
+ Automatic date update in version.in
+
+2022-02-11 H.J. Lu <hjl.tools@gmail.com>
+
+ x86: Disallow invalid relocation against protected symbol
+ I am checking this into master and will backport it to 2.38 branch.
+
+ H.J
+ ----
+ On x86, GCC 12 supports -mno-direct-extern-access to enable canonical
+ reference to protected function and disable copy relocation. With
+ -mno-direct-extern-access, the canonical protected function symbols must
+ be accessed via canonical reference and the protected data symbols in
+ shared libraries are non-copyable. Under glibc 2.35, non-canonical
+ reference to the canonical protected function will get the run-time error:
+
+ ./y: internal_f: ./libfoo.so: non-canonical reference to canonical protected function
+
+ and copy relocations against the non-copyable protected symbols will get
+ the run-time error:
+
+ ./x: internal_i: ./libfoo.so: copy relocation against non-copyable protected symbol
+
+ Update x86 linker to disallow non-canonical reference to the canonical
+ protected function:
+
+ ld: plt.o: non-canonical reference to canonical protected function `internal_f' in libfoo.so
+ ld: failed to set dynamic section sizes: bad value
+
+ and copy relocation against the non-copyable protected symbol:
+
+ ld: main.o: copy relocation against non-copyable protected symbol `internal_i' in libfoo.so
+
+ at link-time.
+
+ bfd/
+
+ PR ld/28875
+ * elf-properties.c (_bfd_elf_parse_gnu_properties): Don't skip
+ shared libraries for GNU_PROPERTY_1_NEEDED_INDIRECT_EXTERN_ACCESS.
+ * elf32-i386.c (elf_i386_scan_relocs): Disallow non-canonical
+ reference to canonical protected function.
+ * elf64-x86-64.c (elf_x86_64_scan_relocs): Likewise.
+ * elfxx-x86.c (elf_x86_allocate_dynrelocs): Don't allow copy
+ relocation against non-copyable protected symbol.
+
+ ld/
+
+ PR ld/28875
+ * testsuite/ld-i386/i386.exp: Check non-canonical reference to
+ canonical protected function and check copy relocation against
+ non-copyable protected symbol.
+ * testsuite/ld-i386/pr21997-1.err: New file.
+ * testsuite/ld-i386/pr28875.err: Likewise.
+ * testsuite/ld-i386/pr28875a.c: Likewise.
+ * testsuite/ld-i386/pr28875b.c: Likewise.
+ * testsuite/ld-x86-64/pr21997-1a.err: Updated.
+ * testsuite/ld-x86-64/pr21997-1b.err: Likewise.
+ * testsuite/ld-x86-64/pr28875-data.err: New file.
+ * testsuite/ld-x86-64/pr28875-func.err: Likewise.
+ * testsuite/ld-x86-64/x86-64.exp: Check non-canonical reference
+ to canonical protected function and check copy relocation against
+ non-copyable protected symbol.
+
+2022-02-11 Tom Tromey <tromey@adacore.com>
+
+ Add initializers to bound_minimal_symbol
+ This adds initializers to bound_minimal_symbol, allowing for the
+ removal of some calls to memset.
+
+2022-02-11 Bhuvanendra Kumar N <Bhuvanendra.KumarN@amd.com>
+
+ gdb/fortran: support ptype and print commands for namelist variables
+ Gfortran supports namelists (a Fortran feature); it emits
+ DW_TAG_namelist and DW_TAG_namelist_item dies. But gdb does not
+ process these dies and does not support 'print' or 'ptype' commands on
+ namelist variables.
+
+ An attempt to print namelist variables results in gdb bailing out with
+ the error message as shown below.
+
+ (gdb) print nml
+ No symbol "nml" in current context.
+
+ This commit is to make the print and ptype commands work for namelist
+ variables and its items. Sample output of these commands is shared
+ below, with fixed gdb.
+
+ (gdb) ptype nml
+ type = Type nml
+ integer(kind=4) :: a
+ integer(kind=4) :: b
+ End Type nml
+ (gdb) print nml
+ $1 = ( a = 10, b = 20 )
+
+2022-02-11 Bruno Larsen <blarsen@redhat.com>
+
+ gdb: fix until behavior with trailing !is_stmt lines
+ When using the command "until", it is expected that GDB will exit a
+ loop if the current instruction is the last one related to that loop.
+ However, if there were trailing non-statement instructions, "until"
+ would just behave as "next". This was noticeable in clang-compiled
+ code, but might happen with gcc-compiled as well. PR gdb/17315 relates
+ to this problem, as running gdb.base/watchpoint.exp with clang
+ would fail for this reason.
+
+ To better understand this issue, consider the following source code,
+ with line numbers marked on the left:
+
+ 10: for (i = 0; i < 10; ++i)
+ 11: loop_body ();
+ 12: other_stuff ();
+
+ If we transform this to pseudo-assembler, and generate a line table,
+ we could end up with something like this:
+
+ Address | Pseudo-Assembler | Line | Is-Statement?
+
+ 0x100 | i = 0 | 10 | Yes
+ 0x104 | loop_body () | 11 | Yes
+ 0x108 | i = i + 1 | 10 | Yes
+ 0x10c | if (i < 10): | 10 | No
+ 0x110 | goto 0x104 | 10 | No
+ 0x114 | other_stuff () | 12 | Yes
+
+ Notice the two non-statement instructions at the end of the loop.
+
+ The problem is that when we reach address 0x108 and use 'until',
+ hoping to leave the loop, GDB sets up a stepping range that runs from
+ the start of the function (0x100 in our example) to the end of the
+ current line table entry, that is 0x10c in our example. GDB then
+ starts stepping forward.
+
+ When 0x10c is reached GDB spots that we have left the stepping range,
+ that the new location is not a statement, and that the new location is
+ associated with the same source line number as the previous stepping
+ range. GDB then sets up a new stepping range that runs from 0x10c to
+ 0x114, and continues stepping forward.
+
+ Within that stepping range the inferior hits the goto (at 0x110) and
+ loops back to address 0x104.
+
+ At 0x104 GDB spots that we have left the previous stepping range, that
+ the new address is marked as a statement, and that the new address is
+ for a different source line. As a result, GDB stops and returns
+ control to the user. This is not what the user was expecting, they
+ expected GDB to exit the loop.
+
+ The fix proposed in this patch, is that, when the user issues the
+ 'until' command, and GDB sets up the initial stepping range, GDB will
+ check subsequent SALs (symtab_and_lines) to see if they are
+ non-statements associated with the same line number. If they are then
+ the end of the initial stepping range is extended to the end of the
+ non-statement SALs.
+
+ In our example above, the user is at 0x108 and uses 'until', GDB now
+ sets up a stepping range from the start of the function 0x100 to
+ 0x114, the first address associated with a different line.
+
+ Now as GDB steps around the loop it never leaves the initial stepping
+ range. It is only when GDB exits the loop that we leave the stepping
+ range, and the stepping finishes at address 0x114.
+
+ This patch also adds a test case that can be run with gcc to test that
+ this functionality is not broken in the future.
+
+ Bug: https://sourceware.org/bugzilla/show_bug.cgi?id=17315
+
+2022-02-11 Richard Sandiford <richard.sandiford@arm.com>
+
+ gas/doc: Fix "a true results" typo
+
+2022-02-11 Jan Vrany <jan.vrany@labware.com>
+
+ gdb: extend the information printed by 'maint info jit'
+ This commit updates the output of 'maint info jit' to print not just
+ the jit_code_entry address, but also the symfile address, and the
+ symfile size.
+
+ The new information could be obtained by looking into target memory at
+ the contents of the jit_code_entry, but, by storing this information
+ within gdb at the time the jit object is loaded, it is now possible to
+ check if the jit_code_entry has been modified in target memory behind
+ gdb's back.
+
+ Additionally, the symfile address is the same address that is now used
+ in the objfile names after commit 4a620b7e.
+
+ One test that relies on the output of 'maint info jit' was updated to
+ allow for the new output format.
+
+2022-02-11 Michael Forney <mforney@mforney.org>
+
+ bfd: Remove return with expression in void function
+ * bfd.c (bfd_set_gp_value): Remove return with expression
+ in void function.
+
+2022-02-11 Tiezhu Yang <yangtiezhu@loongson.cn>
+
+ gdb: LoongArch: Add Makefile, configure and NEWS
+ This commit adds Makefile, configure and NEWS for LoongArch.
+
+ gdb: LoongArch: Add initial native Linux support
+ This commit adds initial native Linux support for LoongArch.
+
+ gdb: LoongArch: Add initial Linux target support
+ This commit adds initial Linux target support for LoongArch.
+
+ gdb: LoongArch: Add initial baremetal support
+ This commit adds initial baremetal support for LoongArch.
+
+ gdb: LoongArch: Add initial target description support
+ This commit adds initial target description support for LoongArch.
+
+2022-02-11 Mike Frysinger <vapier@gentoo.org>
+
+ libctf: delete unused libctf_TEXINFOS
+ It's not clear what this was meant for, but it's not used by anything,
+ and the info pages still generate fine without it.
+
+2022-02-11 Simon Marchi <simon.marchi@polymtl.ca>
+
+ gdb/linux: remove ptrace support check for exec, fork, vfork, vforkdone, clone, sysgood
+ I think it's safe to remove checking support for these ptrace features,
+ they have all been added in what is now ancient times (around the
+ beginning of Linux 2.6). This allows removing a bit of complexity in
+ linux-nat.c and nat/linux-ptrace.c.
+
+ It also allows saving one extra fork every time we start debugging on
+ Linux: linux_check_ptrace_features forks a child process to test if some
+ ptrace features are supported. That child process forks a grand-child,
+ to test whether ptrace reports an event for the fork by the child. This
+ is no longer needed, if we assume the kernel supports reporting forks.
+
+ PTRACE_O_TRACEVFORKDONE was introduced in Linux in this change, in 2003:
+
+ https://git.kernel.org/pub/scm/linux/kernel/git/tglx/history.git/commit/?id=45c1a159b85b3b30afd26a77b4be312226bba416
+
+ PTRACE_O_TRACESYSGOOD was supported at least as of this change, in 2002:
+
+ https://git.kernel.org/pub/scm/linux/kernel/git/tglx/history.git/commit/?id=acc7088569c8eef04eeed0eff51d23bb5bcff964
+
+ PTRACE_O_TRACEFORK, PTRACE_O_TRACEVFORK, PTRACE_O_TRACEEXEC and
+ PTRACE_O_TRACECLONE were introduced in this change, in 2002:
+
+ https://git.kernel.org/pub/scm/linux/kernel/git/tglx/history.git/commit/?id=a0691b116f6a4473f0fa264210ab9b95771a2b46
+
+ Change-Id: Iffb906549a89cc6b619427f976ec044706ab1e8d
+
+2022-02-11 GDB Administrator <gdbadmin@sourceware.org>
+
+ Automatic date update in version.in
+
+2022-02-10 Andrew Burgess <aburgess@redhat.com>
+
+ gdb/infrun: some extra infrun debug print statements
+ While reviewing a different patch I wanted to know more about what was
+ going on during GDB's stepping. I added some extra infrun debug print
+ calls, and I thought these might be useful to others.
+
+2022-02-10 GDB Administrator <gdbadmin@sourceware.org>
+
+ Automatic date update in version.in
+
+2022-02-09 Nick Clifton <nickc@redhat.com>
+
+ Update the obsolete list and how-to-make-a-release documentation now that the 2.38 release is out.
+
+2022-02-09 Alan Modra <amodra@gmail.com>
+
+ PR28763, SIGSEGV during processing of program headers via readelf
+ PR 28763
+ * readelf.c (process_file_header): Discard any cached program
+ headers if there is an extension field for e_phnum in first
+ section header.
+
+2022-02-09 Alan Modra <amodra@gmail.com>
+
+ Work around gcc-4 warnings in elf64-ppc.c
+ elf64-ppc.c: In function 'ppc64_elf_size_dynamic_sections':
+ elf64-ppc.c:10309:45: error: value computed is not used [-Werror=unused-value]
+ ++lgot_ents, ++lgot_masks, isym != NULL && isym++)
+
+ It is of course a silly warning, fixed in later versions of gcc. I
+ wrote "isym != NULL && isym++" rather than the simpler "isym++" to
+ stop sanitisers complaining about incrementing a NULL pointer. isym
+ is of course unused in any code path where it might start off as
+ NULL. Sometimes you can't win. So don't try to be clever in reading
+ local symbols only when needed. 99 times out of 100 they will be
+ cached anyway.
+
+ * elf64-ppc.c (ppc64_elf_size_dynamic_sections): Avoid annoying
+ warnings by always reading local syms.
+ (ppc64_elf_layout_multitoc): Likewise.
+
+2022-02-09 Peilin Ye <peilin.ye@bytedance.com>
+
+ Test --only-keep-debug on ELF relocatables
+ Add a test for commit 7c4643efe7be, which fixed --only-keep-debug for ELF
+ relocatables.
+
+ * testsuite/binutils-all/objcopy.exp
+ (keep_debug_symbols_for_elf_relocatable): New test.
+
+2022-02-09 GDB Administrator <gdbadmin@sourceware.org>
+
+ Automatic date update in version.in
+
+2022-02-08 Palmer Dabbelt <palmer@rivosinc.com>
+
+ RISC-V: Stop reporting warnings for mismatched extension versions
+ The extension version checking logic is really just too complicated to
+ encode into the linker, trying to do so causes more harm than good.
+ This removes the checks and the associated tests, leaving the logic to
+ keep the largest version of each extension linked into the target.
+
+ bfd/
+
+ * elfnn-riscv.c (riscv_version_mismatch): Rename to
+ riscv_update_subset_version, and stop reporting warnings on
+ version mismatches.
+ (riscv_merge_std_ext): Adjust calls to riscv_version_mismatch.
+ (riscv_merge_multi_letter_ext): Likewise.
+
+ ld/
+ * testsuite/ld-riscv-elf/attr-merge-arch-failed-01.d: Remove
+ * testsuite/ld-riscv-elf/attr-merge-arch-failed-01a.s: Likewise
+ * testsuite/ld-riscv-elf/attr-merge-arch-failed-01b.s: Likewise
+ * testsuite/ld-riscv-elf/attr-merge-arch-failed-02.d: Likewise
+ * testsuite/ld-riscv-elf/attr-merge-arch-failed-02a.s: Likewise
+ * testsuite/ld-riscv-elf/attr-merge-arch-failed-02b.s: Likewise
+ * testsuite/ld-riscv-elf/attr-merge-arch-failed-02c.s: Likewise
+ * testsuite/ld-riscv-elf/attr-merge-arch-failed-02d.s: Likewise
+ * testsuite/ld-riscv-elf/attr-merge-user-ext-01.d: New test.
+ * testsuite/ld-riscv-elf/attr-merge-user-ext-rv32i21_m2p0.s:
+ Likewise.
+ * testsuite/ld-riscv-elf/attr-merge-user-ext-rv32i21_m2p1.s:
+ Likewise.
+ * testsuite/ld-riscv-elf/ld-riscv-elf.exp: Remove obselete
+ attr-merge-arch-failed-{01,02}, replace with
+ attr-merge-user-ext-01.
+
+2022-02-08 Alan Modra <amodra@gmail.com>
+
+ PR28862, heap-buffer-overflow in parse_stab_string
+ I have no info on the format of a "SUNPRO C++ Namespace" stab, so am
+ relying on the previous code being correct in parsing these stabs.
+ Just don't allow NULs anywhere in the stab.
+
+ PR 28862
+ * stabs.c (parse_stab_string): Don't overrun buffer when parsing
+ 'Y' stab.
+
+2022-02-08 Alan Modra <amodra@gmail.com>
+
+ Re: elf: Check symbol version without any symbols
+ * testsuite/ld-elf/pr24718-1.d: Don't xfail for hppa64.
+
+2022-02-08 Andrew Burgess <aburgess@redhat.com>
+
+ gdb: remove tailing newlines from index_cache_debug calls
+ I noticed that most of the calls to index_cache_debug include a
+ trailing newline. As the new debug mechanism already adds a newline,
+ that means all of these debug calls result in a blank line being
+ printed, which I think is a mistake.
+
+ Remove all the trailing newlines.
+
+ I also reformatted one of the index_cache_debug where a string will
+ now fit onto a single line.
+
+ Unless 'set debug index-cache on' is used, there should be no visible
+ change in output after this commit.
+
+2022-02-08 H.J. Lu <hjl.tools@gmail.com>
+
+ i386: Allow GOT32 relocations against ABS symbols
+ GOT32 relocations are allowed since absolute value + addend is stored in
+ the GOT slot.
+
+ Tested on glibc 2.35 build with GCC 11.2 and -Os.
+
+ bfd/
+
+ PR ld/28870
+ * elfxx-x86.c (_bfd_elf_x86_valid_reloc_p): Also allow GOT32
+ relocations.
+
+ ld/
+
+ PR ld/28870
+ * testsuite/ld-i386/i386.exp: Run pr28870.
+ * testsuite/ld-i386/pr28870.d: New file.
+ * testsuite/ld-i386/pr28870.s: Likewise.
+
+2022-02-08 GDB Administrator <gdbadmin@sourceware.org>
+
+ Automatic date update in version.in
+
+2022-02-07 Andrew Burgess <aburgess@redhat.com>
+
+ gdb/python: allow Value.format_string to return styled output
+ Add a new argument to the gdb.Value.format_string method, 'styling'.
+ This argument is False by default.
+
+ When this argument is True, then the returned string can contain output
+ styling escape sequences.
+
+ When this argument is False, then the returned string will not contain
+ any styling escape sequences.
+
+ If the returned string is going to be printed to the user, then it is
+ often nice to retain the GDB styling.
+
+ For the testing, we need to adjust the TERM environment variable, as
+ we do for all the styling tests. I'm now running all of the C tests
+ in gdb.python/py-format-string.exp in an environment where styling
+ could be generated, but only my new test should actually produce
+ styled output, hopefully this will catch the case where a bug might
+ cause format_string to always produce styled output.
+
+2022-02-07 Lancelot SIX <lancelot.six@amd.com>
+
+ gdb: make thread_info::m_thread_fsm a std::unique_ptr
+ While working on function calls, I realized that the thread_fsm member
+ of struct thread_info is a raw pointer to a resource it owns. This
+ commit changes the type of the thread_fsm member to a std::unique_ptr in
+ order to signify this ownership relationship and slightly ease resource
+ management (no need to manually call delete).
+
+ To ensure consistent use, the field is made a private member
+ (m_thread_fsm). The setter method (set_thread_fsm) can then check
+ that it is incorrect to associate a FSM to a thread_info object if
+ another one is already in place. This is ensured by an assertion.
+
+ The function run_inferior_call takes an argument as a pointer to a
+ call_thread_fsm and installs it in it in a thread_info instance. Also
+ change this function's signature to accept a unique_ptr in order to
+ signify that the ownership of the call_thread_fsm is transferred during
+ the call.
+
+ No user visible change expected after this commit.
+
+ Tested on x86_64-linux with no regression observed.
+
+ Change-Id: Ia1224f72a4afa247801ce6650ce82f90224a9ae8
+
+2022-02-07 Andrew Burgess <aburgess@redhat.com>
+
+ gdb: unbuffer all input streams when not using readline
+ This commit should fix PR gdb/28711. What's actually going on is
+ pretty involved, and there's still a bit of the story that I don't
+ understand completely, however, from my observed results, I think that
+ the change I propose making here (or something very similar) is going
+ to be needed.
+
+ The original bug report involves using eclipse to drive gdb using mi
+ commands. A separate tty is spun off in which to send gdb the mi
+ commands, this tty is created using the new-ui command.
+
+ The behaviour observed is that, given a particular set of mi commands
+ being sent to gdb, we sometimes see an ESPIPE error from a lseek
+ call, which ultimately results in gdb terminating.
+
+ The problems all originate from gdb_readline_no_editing_callback in
+ gdb/event-top.c, where we can (sometimes) perform calls to fgetc, and
+ allow glibc to perform buffering on the FILE object being used.
+
+ I say sometime, because, gdb_readline_no_editing_callback already
+ includes a call to disable the glibc buffering, but this is only done
+ if the input stream is not a tty. In our case the input stream is a
+ tty, so the buffering is left in place.
+
+ The first step to understanding why this problem occurs is to
+ understand that eclipse sends multiple commands to gdb very quickly
+ without waiting for and answer to each command, eclipse plans to
+ collect all of the command results after sending all the commands to
+ gdb. In fact, eclipse sends the commands to gdb that they appear to
+ arrive in the gdb process as a single block of data. When reproducing
+ this issue within the testsuite I find it necessary to send multiple
+ commands using a single write call.
+
+ The next bit of the story gets a little involved, and this is where my
+ understanding is not complete. I can describe the behaviour that I
+ observe, and (for me at least) I'm happy that what I'm seeing, if a
+ little strange, is consistent. In order to fully understand what's
+ going on I think I would likely need to dive into kernel code, which
+ currently seems unnecessary given that I'm happy with the solution I'm
+ proposing.
+
+ The following description all relates to input from a tty in which I'm
+ not using readline. I see the same problems either when using a
+ new-ui tty, or with gdb's standard, non-readline, mi tty.
+
+ Here's what I observe happening when I send multiple commands to gdb
+ using a single write, if I send gdb this:
+
+ command_1\ncommand_2\ncommand_3
+
+ then gdb's event loop will wake up (from its select) as it sees there
+ is input available. We call into gdb_readline_no_editing_callback,
+ where we call fgetc, glibc will do a single big read, and get back
+ just:
+
+ command_1\n
+
+ that is, despite there being multiple lines of input available, I
+ consistently get just a single line. From glibc a single character is
+ returned from the fgetc call, and within gdb we accumulate characters,
+ one at a time, into our own buffer. Eventually gdb sees the '\n'
+ character, and dispatches the whole 'command_1' into gdb's command
+ handler, which processes the command and prints the result. We then
+ return to gdb_readline_no_editing_callback, which in turn returns to
+ gdb's event loop where we re-enter the select.
+
+ Inside the select we immediately see that there is more input waiting
+ on the input stream, drop out of the select, and call back into
+ gdb_readline_no_editing_callback. In this function we again call
+ fgetc where glibc performs another big read. This time glibc gets:
+
+ command_2\n
+
+ that is, we once again get just a single line, despite there being a
+ third line available. Just like the first command we copy the whole
+ string, character by character into gdb's buffer, then handle the
+ command. After handling the command we go to the event loop, enter,
+ and then exit the select, and call back to the function
+ gdb_readline_no_editing_callback.
+
+ In gdb_readline_no_editing_callback we again call fgetc, this time
+ glibc gets the string:
+
+ command_3\n
+
+ like before, we copy this to gdb's buffer and handle the command, then
+ we return to the event loop. At this point the select blocks while we
+ wait for more input to arrive.
+
+ The important bit of this is that someone, somewhere is, it appears,
+ taking care to split the incoming write into lines.
+
+ My next experiment is to try something like:
+
+ this_is_a_very_long_command\nshort_command\n
+
+ However, I actually make 'this_is_a_very_long_command' very long, as
+ in many hundreds of characters long. One way to do this is:
+
+ echo xxxxxx.....xxxxx
+
+ and just adding more and more 'x' characters as needed. What I'm
+ aiming for is to have the first command be longer than glibc's
+ internal read buffer, which, on my machine, is 1024 characters.
+
+ However, for this discussion, lets imagine that glibc's buffer is just
+ 8 characters (we can create just this situation by adding a suitable
+ setbuf call into gdb_readline_no_editing_callback).
+
+ Now, if I send gdb this data:
+
+ abcdefghij\nkl\n
+
+ The first read from glibc will get 'abcdefgh', that is a full 8
+ character buffer. Once gdb has copied these to its buffer we call
+ fgetc again, and now glibc will get 'ij\n', that is, just like before,
+ multiple lines are split at the '\n' character. The full command,
+ which is now in gdb's buffer can be handled 'abcdefghij', after which
+ we go (via the event loop) back to gdb_readline_no_editing_callback.
+ Now we call fgetc, and glibc will get 'kl\n', which is then handled in
+ the normal way.
+
+ So far, so good. However, there is, apparently, one edge case where
+ the above rules don't apply.
+
+ If the '\n' character is the first character read from the kernel,
+ then the incoming lines are not split up. So, given glibc's 8
+ character buffer, if I send gdb this:
+
+ abcdefgh\nkl\n
+
+ that is the first command is 8 characters plus a newline, then, on the
+ first read (from within glibc) we get 'abcdefgh' in a single buffer.
+ As there's no newline gdb calls fgetc again, and glibc does another
+ large read, now we get:
+
+ \nkl\n
+
+ which doesn't follow the above pattern - the lines are not split into
+ separate buffers!
+
+ So, gdb reads the first character from glibc using fgetc, this is the
+ newline. Now gdb has a complete command, and so the command is
+ handled. We then return to the event loop and enter the select.
+
+ The problem is that, as far as the kernel is concerned, there is no
+ more input pending, it's all been read into glibc's buffer, and so the
+ select doesn't return. The second command is basically stuck in
+ glibc's buffer.
+
+ If I send another command to gdb, or even just send an empty
+ command (a lone newline) then the select returns, we call into
+ gdb_readline_no_editing_callback, and now gdb sees the second
+ command.
+
+ OK, so the above is interesting, but it doesn't explain the ESPIPE
+ error.
+
+ Well, that's a slightly different, but related issue. The ESPIPE
+ case will _only_ show up when using new-ui to create the separate tty
+ for mi commands, and is a consequence of this commit:
+
+ commit afe09f0b6311a4dd1a7e2dc6491550bb228734f8
+ Date: Thu Jul 18 17:20:04 2019 +0100
+
+ Fix for using named pipes on Windows
+
+ Prior to this commit, the new-ui command would open the tty three
+ times, once each for stdin, stderr, and stdout. After this commit we
+ open the tty just once and reuse the FILE object for all three roles.
+
+ Consider the problem case, where glibc has (unexpectedly) read the
+ second command into its internal buffer. When we handle the first
+ command we usually end up having to write something to the mi output
+ stream.
+
+ After the above commit the same FILE object represents both the input
+ and output streams, so, when gdb tries to write to the FILE object,
+ glibc spots that there is input pending within the input buffer, and
+ so assumes that we have read ahead of where we should be in the input
+ file. To correct for this glibc tries to do an lseek call to
+ reposition the file offset of the output stream prior to writing to
+ it. However, as the output stream is a tty, and seeking is not
+ supported on a tty, this lseek call fails, this results in the ESPIPE,
+ which ultimately causes gdb to terminate.
+
+ So, now we understand why the ESPIPE triggers (which was what caused
+ the gdb crash in the original bug report), and we also understand that
+ sometime gdb will not handle the second command in a timely
+ fashion (if the first command is just the wrong length). So, what to
+ do about all this?
+
+ We could revert the commit mentioned above (and implement its
+ functionality another way). This would certainly resolve the ESPIPE
+ issue, the buffered input would now only be on the input stream, the
+ output stream would have no buffered input, and so glibc would never
+ try to lseek, and so we'd never get the ESPIPE error.
+
+ However, this only solves one of the two problems. We would still
+ suffer from the problem where, if the first command is just the wrong
+ length, the second command will not (immediately) get handled.
+
+ The only solution I can see to this problem is to unbuffer the input
+ stream. If glibc is not buffering the input, but instead, we read
+ incoming data character by character from the kernel, then everything
+ will be fine. As soon as we see the newline at the end of the first
+ command we will handle the first command. As glibc will have no
+ buffered input it will not be tempted to lseek, so no ESPIPE error.
+ When we go have to the event loop there will be more data pending in
+ the kernel, so the select will immediately return, and the second
+ command will be processed.
+
+ I'm tempted to suggest that we should move the unbuffering of the
+ input stream out of gdb_readline_no_editing_callback and do it
+ somewhere earlier, more like when we create the input streams.
+ However, I've not done that in this commit for a couple of reasons:
+
+ 1. By keeping the unbuffering in gdb_readline_no_editing_callback
+ I'm making the smallest possible change that fixes the bug. Moving
+ the unbuffering somewhere better can be done as a refactor later, if
+ that 's felt to be important,
+
+ 2. I don't think making repeated calls to unbuffer the input will
+ have that much performance impact. We only make the unbuffer call
+ once per call to gdb_readline_no_editing_callback, and, if the input
+ stream is already unbuffered we'll return pretty quickly, so I don't
+ see this as being massively costly,
+
+ 3. Tom is currently doing lots of gdb stream management changes and
+ I want to minimise the chances we'll conflict.
+
+ So, this commit just changes gdb_readline_no_editing_callback to
+ always unbuffer the input stream.
+
+ The test for this issue sends two commands in a loop, with the first
+ command growing bigger each time around the loop. I actually make the
+ first command bigger by just adding whitespace to the front, as gdb
+ still has to read the complete command (including whitespace) via
+ glibc, so this is enough to trigger the bug.
+
+ The original bug was reported when using a virtual machine, and in
+ this situation we see this in the strace output:
+
+ read(9, "70-var-info-path-expression var1.aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa", 1024) = 64
+ read(9, "\n71-var-info-path-expression var1.aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa\n", 1024) = 67
+
+ I'm not completely sure what's going on here, but it appears that the
+ kernel on the virtual machine is delivering the input to glibc slower
+ than I see on my real hardware; glibc asks for 1024 bytes, but only
+ gets 64 bytes the first time. In the second read we see the problem
+ case, the first character is the newline, but then the entire second
+ command is included.
+
+ If I run this exact example on my real hardware then the first command
+ would not be truncated at 64 bytes, instead, I'd expect to see the
+ newline included in the first read, with the second command split into
+ a second read.
+
+ So, for testing, I check cases where the first command is just a few
+ characters (starting at 8 character), all the way up to 2048
+ characters. Hopefully, this should mean we hit the problem case for
+ most machine setups.
+
+ The only last question relates to commit afe09f0b6311a4d that I
+ mentioned earlier. That commit was intended to provide support for
+ Microsoft named pipes:
+
+ https://docs.microsoft.com/en-us/windows/win32/ipc/named-pipes
+
+ I know next to nothing about this topic beyond a brief scan of the
+ above link, but I think these windows named pipe are closer in
+ behaviour to unix sockets than to unix named fifos.
+
+ I am a little nervous that, after the above commit, we now use the
+ same FILE for in, err, and out streams. In contrast, in a vanilla C
+ program, I would expect different FILE objects for each stream.
+
+ Still, I'm reluctant to revert the above commit (and provide the same
+ functionality a different way) without a specific bug to point at,
+ and, now that the streams are unbuffered, I expect a lot of the read
+ and write calls are going straight to the kernel with minimal glibc
+ involvement, so maybe it doesn't really matter. Anyway, I haven't
+ touched the above patch, but it is something to keep in mind when
+ working in this area.
+
+ Bug: https://sourceware.org/bugzilla/show_bug.cgi?id=28711
+
+2022-02-07 Andrew Burgess <aburgess@redhat.com>
+
+ gdb/disasm: combine the no printing disassembler setup code
+ We have three places in gdb where we initialise a disassembler that
+ will not print anything (used for figuring out the length of
+ instructions, or collecting other information from the disassembler).
+
+ Each of these places has its own stub function to act as a print like
+ callback, the stub function is identical in each case, and just does
+ nothing.
+
+ In this commit I create a new function to initialise a disassembler
+ that doesn't print anything, and have all three locations use this new
+ function. There's now only one non-printing stub function.
+
+ There should be no user visible changes after this commit.
+
+2022-02-07 Tankut Baris Aktemur <tankut.baris.aktemur@intel.com>
+
+ gdb: add the 'set/show suppress-cli-notifications' command
+ GDB already has a flag to suppress printing notification events, such
+ as thread and inferior context switches, on the CLI. This is used
+ internally when executing commands. Make the flag available to the
+ user via a new command. This is expected to be useful in scripts.
+
+ For instance, suppose that when Inferior 1 gets to a certain state,
+ you want to add and set up a new inferior using the commands below,
+ but you also want to have a reduced/clean output.
+
+ define do-setup
+ printf "Setting up Inferior 2...\n"
+ add-inferior -exec a.out
+ inferior 2
+ break file.c:3
+ run
+ inferior 1
+ printf "Done\n"
+ end
+
+ Currently, GDB prints
+
+ (gdb) do-setup
+ Setting up Inferior 2...
+ [New inferior 2]
+ Added inferior 2 on connection 1 (native)
+ [Switching to inferior 2 [<null>] (/tmp/a.out)]
+ Breakpoint 2 at 0x1155: file file.c, line 3.
+
+ Thread 2.1 "a.out" hit Breakpoint 2, main () at file.c:3
+ 3 return 0;
+ [Switching to inferior 1 [process 7670] (/tmp/test)]
+ [Switching to thread 1.1 (process 7670)]
+ #0 main () at test.c:2
+ 2 int a = 1;
+ Done
+
+ GDB's Python API make it possible to capture and return GDB's output,
+ but this does not work for all the streams. In particular, CLI
+ notification events are not captured:
+
+ (gdb) python gdb.execute("do-setup", False, True)
+ [Switching to inferior 2 [<null>] (/tmp/a.out)]
+
+ Thread 2.1 "a.out" hit Breakpoint 2, main () at file.c:3
+ 3 return 0;
+ [Switching to inferior 1 [process 8263] (/tmp/test)]
+ [Switching to thread 1.1 (process 8263)]
+ #0 main () at test.c:2
+ 2 int a = 1;
+
+ You can use the new "set suppress-cli-notifications" command to
+ suppress the output:
+
+ (gdb) set suppress-cli-notifications on
+ (gdb) do-setup
+ Setting up Inferior 2...
+ [New inferior 2]
+ Added inferior 2 on connection 1 (native)
+ Breakpoint 2 at 0x1155: file file.c, line 3.
+ Done
+
+2022-02-07 Tankut Baris Aktemur <tankut.baris.aktemur@intel.com>
+
+ gdb/cli: add a 'normal_stop' option to 'cli_suppress_notification'
+ Extend the 'cli_suppress_notification' struct with a new field,
+ 'normal_stop', that can be used for checking if printing normal stop
+ events on the CLI should be suppressed.
+
+ This patch only introduces the flag. The subsequent patch adds a user
+ command to turn the flag off/on.
+
+2022-02-07 Tankut Baris Aktemur <tankut.baris.aktemur@intel.com>
+
+ gdb/cli: convert cli_suppress_notification from int to bool
+ Convert the suppress_notification flag for the CLI from int to bool.
+
+2022-02-07 Alan Modra <amodra@gmail.com>
+
+ Revert "elf: Remove the 1-page gap before the RELRO segment"
+ This reverts commit 2f83249c13d86065b4c7cdb198ea871017b4bba1.
+
+ PR ld/28743
+ * ldlang.c (lang_size_relro_segment_1): Revert 2022-01-10 changes.
+ * testsuite/ld-i386/pr20830.d: Likewise.
+ * testsuite/ld-s390/gotreloc_64-relro-1.dd: Likewise.
+ * testsuite/ld-x86-64/pr14207.d: Likewise.
+ * testsuite/ld-x86-64/pr18176.d: Likewise.
+ * testsuite/ld-x86-64/pr20830a-now.d: Likewise.
+ * testsuite/ld-x86-64/pr20830a.d: Likewise.
+ * testsuite/ld-x86-64/pr20830b-now.d: Likewise.
+ * testsuite/ld-x86-64/pr20830b.d: Likewise.
+ * testsuite/ld-x86-64/pr21038a-now.d: Likewise.
+ * testsuite/ld-x86-64/pr21038a.d: Likewise.
+ * testsuite/ld-x86-64/pr21038b-now.d: Likewise.
+ * testsuite/ld-x86-64/pr21038c-now.d: Likewise.
+ * testsuite/ld-x86-64/pr21038c.d: Likewise.
+
+2022-02-07 Alan Modra <amodra@gmail.com>
+
+ Revert "ld: Rewrite lang_size_relro_segment_1"
+ This reverts commit c804c6f98d342c3d46f73d7a7ec6229d5ab1c9f3.
+
+ PR ld/28743
+ PR ld/28819
+ * ldlang.c (lang_size_relro_segment_1): Revert 2022-01-14 change.
+ * testsuite/ld-x86-64/pr28743-1.d: Likewise.
+ * testsuite/ld-x86-64/pr28743-1.s: Likewise.
+ * testsuite/ld-x86-64/x86-64.exp: Likewise.
+
+2022-02-07 GDB Administrator <gdbadmin@sourceware.org>
+
+ Automatic date update in version.in
+
+2022-02-06 Alan Modra <amodra@gmail.com>
+
+ A more elegant pr28827-1 testcase
+ Use .irpc macros in pr28827-1.s
+
+ * testsuite/ld-powerpc/pr28827-1.s: Make the testcase more
+ elegant. Comment.
+
+2022-02-06 Tom Tromey <tom@tromey.com>
+
+ Merge do_val_print and common_val_print
+ The only caller of do_val_print just does a small bit of work before
+ the call. This patch merges the two functions, and removes an
+ unnecessary local variable, making gdb a bit simpler.
+
+2022-02-06 Simon Marchi <simon.marchi@efficios.com>
+
+ gdb: remove SYMBOL_LINE macro
+ Add a getter and a setter for a symbol's line. Remove the corresponding macro
+ and adjust all callers.
+
+ Change-Id: I229f2b8fcf938c07975f641361313a8761fad9a5
+
+2022-02-06 Simon Marchi <simon.marchi@efficios.com>
+
+ gdb: remove SYMBOL_TYPE macro
+ Add a getter and a setter for a symbol's type. Remove the corresponding
+ macro and adjust all callers.
+
+ Change-Id: Ie1a137744c5bfe1df4d4f9ae5541c5299577c8de
+
+2022-02-06 Simon Marchi <simon.marchi@efficios.com>
+
+ gdb: remote SYMBOL_IS_CPLUS_TEMPLATE_FUNCTION macro
+ Add a getter for a whether a symbol is a C++ template function. Remove
+ the corresponding macro and adjust all callers.
+
+ Change-Id: I89abc2802a952b77b0e0eb73a25c2306cb8e8bcc
+
+2022-02-06 Simon Marchi <simon.marchi@efficios.com>
+
+ gdb: remove SYMBOL_INLINED macro
+ Add a getter and a setter for whether a symbol is inlined. Remove the
+ corresponding macro and adjust all callers.
+
+ Change-Id: I934468da3b5a32dd6b161a6f252a6b1b94737279
+
+2022-02-06 Simon Marchi <simon.marchi@efficios.com>
+
+ gdb: remove SYMBOL_IS_ARGUMENT macro
+ Add a getter and a setter for whether a symbol is an argument. Remove
+ the corresponding macro and adjust all callers.
+
+ Change-Id: I71b4f0465f3dfd2ed8b9e140bd3f7d5eb8d9ee81
+
+2022-02-06 Simon Marchi <simon.marchi@efficios.com>
+
+ gdb: remove SYMBOL_OBJFILE_OWNED macro
+ Add a getter and a setter for whether a symbol is objfile owned. Remove
+ the corresponding macro and adjust all callers.
+
+ Change-Id: Ib7ef3718d65553ae924ca04c3fd478b0f4f3147c
+
+2022-02-06 Simon Marchi <simon.marchi@efficios.com>
+
+ gdb: remove SYMBOL_DOMAIN macro
+ Add a getter and a setter for a symbol's domain. Remove the
+ corresponding macro and adjust all callers.
+
+ Change-Id: I54465b50ac89739c663859a726aef8cdc6e4b8f3
+
+2022-02-06 Simon Marchi <simon.marchi@efficios.com>
+
+ gdb: remove SYMBOL_CLASS macro, add getter
+ Change-Id: I83211d5a47efc0564386e5b5ea4a29c00b1fd46a
+
+2022-02-06 Simon Marchi <simon.marchi@efficios.com>
+
+ gdb: remove SYMBOL_IMPL macro, add method
+ Add a getter for a symbol's "impl". Remove the corresponding macro and
+ adjust all callers.
+
+ Change-Id: Ibe26ed442f0f99a0f5cddafca30bd96ec7fb9fa8
+
+2022-02-06 Simon Marchi <simon.marchi@efficios.com>
+
+ gdb: remove SYMBOL_ACLASS_INDEX macro, add getter/setter
+ Add a getter and a setter for a symbol's aclass index. Remove the
+ corresponding macro and adjust all callers.
+
+ Change-Id: Ie8c8d732624cfadb714aba5ddafa3d29409b3d39
+
+2022-02-06 Simon Marchi <simon.marchi@efficios.com>
+
+ gdb: remove SYMBOL_MATCHES_SEARCH_NAME
+ It seems like this macro is not needed at all anymore, it just wraps the
+ function of the same name with the same arguments.
+
+ Change-Id: I3c342ac8d89c27af5aee1a819dc32cc6396fd41b
+
+2022-02-06 Simon Marchi <simon.marchi@efficios.com>
+
+ gdb: remove SYMTAB_DIRNAME macro
+ Remove the macro, replace with an equivalent method.
+
+ Change-Id: I46ec36b91bb734331138eb9cd086b2db01635aed
+
+2022-02-06 Simon Marchi <simon.marchi@efficios.com>
+
+ gdb: remove SYMTAB_PSPACE macro
+ Remove the macro, replace with an equivalent method.
+
+ Change-Id: Icccc20e7e8ae03ac4dac1c7514c25a12a9a0ac69
+
+2022-02-06 Simon Marchi <simon.marchi@efficios.com>
+
+ gdb: remove SYMTAB_OBJFILE macro
+ Remove the macro, replace with an equivalent method.
+
+ Change-Id: I8f9ecd290ad28502e53c1ceca5006ba78bf042eb
+
+2022-02-06 Simon Marchi <simon.marchi@efficios.com>
+
+ gdb: remove SYMTAB_BLOCKVECTOR macro
+ Remove the macro, replace with an equivalent method.
+
+ Change-Id: Id6fe2a79c04bcd6c69ccaefb7a69bc06a476288c
+
+2022-02-06 Simon Marchi <simon.marchi@efficios.com>
+
+ gdb: remove SYMTAB_LANGUAGE macro, add getter/setter
+ Add a getter and a setter for a symtab's language. Remove the
+ corresponding macro and adjust all callers.
+
+ Change-Id: I9f4d840b11c19f80f39bac1bce020fdd1739e11f
+
+2022-02-06 Simon Marchi <simon.marchi@efficios.com>
+
+ gdb: remove SYMTAB_LINETABLE macro, add getter/setter
+ Add a getter and a setter for a symtab's linetable. Remove the
+ corresponding macro and adjust all callers.
+
+ Change-Id: I159183fc0ccd8e18ab937b3c2f09ef2244ec6e9c
+
+2022-02-06 Simon Marchi <simon.marchi@efficios.com>
+
+ gdb: remove SYMTAB_COMPUNIT macro, add getter/setter
+ Add a getter and a setter for a symtab's compunit_symtab. Remove the
+ corresponding macro and adjust all callers.
+
+ For brevity, I chose the name "compunit" instead of "compunit_symtab"
+ the the field, getter and setter names. Since we are already in symtab
+ context, the _symtab suffix seems redundant.
+
+ Change-Id: I4b9b731c96e3594f7733e75af1e3d01bc0e4fe92
+
+2022-02-06 Simon Marchi <simon.marchi@efficios.com>
+
+ gdb: remove COMPUNIT_MACRO_TABLE macro, add getter/setter
+ Add a getter and a setter for a compunit_symtab's macro table. Remove the
+ corresponding macro and adjust all callers.
+
+ Change-Id: I00615ea72d5ac43d9a865e941cb2de0a979c173a
+
+2022-02-06 Simon Marchi <simon.marchi@efficios.com>
+
+ gdb: remove COMPUNIT_EPILOGUE_UNWIND_VALID macro, add getter/setter
+ Add a getter and a setter for a compunit_symtab's epilogue unwind valid flag.
+ Remove the corresponding macro and adjust all callers.
+
+ Change-Id: If3b68629d987767da9be7041a95d96dc34367a9a
+
+2022-02-06 Simon Marchi <simon.marchi@efficios.com>
+
+ gdb: remove COMPUNIT_LOCATIONS_VALID macro, add getter/setter
+ Add a getter and a setter for a compunit_symtab's locations valid flag.
+ Remove the corresponding macro and adjust all callers.
+
+ Change-Id: I3e3cfba926ce62993d5b61814331bb3244afad01
+
+2022-02-06 Simon Marchi <simon.marchi@efficios.com>
+
+ gdb: remove COMPUNIT_BLOCK_LINE_SECTION macro, add getter/setter
+ Add a getter and a setter for a compunit_symtab's block line section. Remove
+ the corresponding macro and adjust all callers.
+
+ Change-Id: I3eb1a323388ad55eae8bfa45f5bc4a08dc3df455
+
+2022-02-06 Simon Marchi <simon.marchi@efficios.com>
+
+ gdb: remove COMPUNIT_BLOCKVECTOR macro, add getter/setter
+ Add a getter and a setter for a compunit_symtab's blockvector. Remove
+ the corresponding macro and adjust all callers.
+
+ Change-Id: I99484c6619dcbbea7c5d89c72aa660316ca62f64
+
+2022-02-06 Simon Marchi <simon.marchi@efficios.com>
+
+ gdb: remove COMPUNIT_DIRNAME macro, add getter/setter
+ Add a getter and a setter for a compunit_symtab's dirname. Remove the
+ corresponding macro and adjust all callers.
+
+ Change-Id: If2f39b295fd26822586485e04a8b8b5aa5cc9b2e
+
+2022-02-06 Simon Marchi <simon.marchi@efficios.com>
+
+ gdb: remove COMPUNIT_PRODUCER macro, add getter/setter
+ Add a getter and a setter for a compunit_symtab's producer. Remove the
+ corresponding macro and adjust all callers.
+
+ Change-Id: Ia1d6d8a0e247a08a21af23819d71e49b37d8931b
+
+2022-02-06 Simon Marchi <simon.marchi@efficios.com>
+
+ gdb: remove COMPUNIT_DEBUGFORMAT macro, add getter/setter
+ Add a getter and a setter for a compunit_symtab's debugformat. Remove
+ the corresponding macro and adjust all callers.
+
+ Change-Id: I1667b02d5322346f8e23abd9f8a584afbcd75975
+
+2022-02-06 Simon Marchi <simon.marchi@efficios.com>
+
+ gdb: remove COMPUNIT_FILETABS macro
+ I think that most remaining uses of COMPUNIT_FILETABS intend to get the
+ primary filetab of the compunit_symtab specifically (and not to iterate
+ over all filetabs, for example, those cases would use compunit_filetabs,
+ which has been converted to compunit_symtab::filetabs), so replace mosts
+ uses with compunit_symtab::primary_filetab.
+
+ In jit.c, function finalize_symtab, we can save the symtab object
+ returned by allocate_symtab and use it, it makes things simpler.
+
+ Change-Id: I4e51d6d4b40759de8768b61292e5e13c8eae2e38
+
+2022-02-06 Simon Marchi <simon.marchi@efficios.com>
+
+ gdb: move compunit_filetabs to compunit_symtab::filetabs
+ Make compunit_filetabs, used to iterate a compunit_symtab's filetabs, a
+ method of compunit_symtab. The name filetabs conflicts with the current
+ name of the field. Rename the field to m_filetabs, since at this point
+ nothing outside of compunit_symtab uses it, so we should treat it as
+ private (even though it's not actually private). Rename the
+ last_filetab field to m_last_filetab as well (it's only used on
+ compunit_symtab::add_filetab).
+
+ Adjust the COMPUNIT_FILETABS macro to keep its current behavior of
+ returning the first filetab.
+
+ Change-Id: I537b553a44451c52d24b18ee1bfa47e23747cfc3
+
+2022-02-06 Simon Marchi <simon.marchi@efficios.com>
+
+ gdb: add compunit_symtab::set_primary_filetab method
+ Add a method to set the primary filetab of the CU. This is currently
+ done in buildsym_compunit::end_symtab_with_blockvector.
+
+ Change-Id: I16c51a6b90a4cb4c0c5f183b0f2e12bc64b6fd74
+
+2022-02-06 Simon Marchi <simon.marchi@efficios.com>
+
+ gdb: add compunit_symtab::add_filetab method
+ Add a method to append a filetab/symtab to a compunit_symtab. There is
+ a single place where this is done currently, in allocate_symtab.
+
+ Change-Id: Ie86c6e34d175728173d1cffdce44acd6cff6c31d
+
+2022-02-06 Simon Marchi <simon.marchi@efficios.com>
+
+ gdb: rename compunit_primary_filetab to compunit_symtab::primary_filetab
+ Make compunit_primary_filetab a method of compunit_symtab.
+
+ Change-Id: Iee3c4f7e36d579bf763c5bba146e5e10d6766768
+
+2022-02-06 Simon Marchi <simon.marchi@efficios.com>
+
+ gdb: remove COMPUNIT_OBJFILE macro
+ Remove the macro, update all users to use the getter directly.
+
+ Change-Id: I3f0fd6f4455d1c4ebd5da73b561eb18a979ef1f6
+
+2022-02-06 Simon Marchi <simon.marchi@efficios.com>
+
+ gdb: add getter/setter for compunit_symtab::objfile
+ Rename the field to m_objfile, and add a getter and a setter. Update
+ all users.
+
+ Change-Id: If7e2f763ee3e70570140d9af9261b1b056253317
+
+2022-02-06 Tom Tromey <tom@tromey.com>
+
+ Allow non-ASCII characters in Rust identifiers
+ Rust 1.53 (quite a while ago now) ungated the support for non-ASCII
+ identifiers. This didn't work in gdb. This is PR rust/20166.
+
+ This patch fixes the problem by allowing non-ASCII characters to be
+ considered as identifier components. It seemed simplest to just pass
+ them through -- doing any extra checking didn't seem worthwhile.
+
+ The new test also verifies that such characters are allowed in strings
+ and character literals as well. The latter also required a bit of
+ work in the lexer.
+
+ Bug: https://sourceware.org/bugzilla/show_bug.cgi?id=20166
+
+2022-02-06 Tom Tromey <tom@tromey.com>
+
+ Fix Rust parser bug with function fields
+ In Rust, 'obj.f()' is a method call -- but '(obj.f)()' is a call of a
+ function-valued field 'f' in 'obj'. The Rust parser in gdb currently
+ gets this wrong. This is PR rust/24082.
+
+ The expression and Rust parser rewrites made this simple to fix --
+ simply wrapping a parenthesized expression in a new operation handles
+ it. This patch has a slight hack because I didn't want to introduce a
+ new exp_opcode enumeration constant just for this. IMO this doesn't
+ matter, since we should work toward removing dependencies on these
+ opcodes anyway; but let me know what you think of this.
+
+ Bug: https://sourceware.org/bugzilla/show_bug.cgi?id=24082
+
+2022-02-06 H.J. Lu <hjl.tools@gmail.com>
+
+ ld: Add emultempl/emulation.em
+ Add emultempl/emulation.em to define ld_${EMULATION_NAME}_emulation so
+ that new emulation hooks can be added easily.
+
+ * emultempl/aix.em (LDEMUL_AFTER_OPEN): New.
+ (LDEMUL_SET_OUTPUT_ARCH): Likewise.
+ (LDEMUL_CHOOSE_TARGET): Likewise.
+ (LDEMUL_BEFORE_ALLOCATION): Likewise.
+ (LDEMUL_CREATE_OUTPUT_SECTION_STATEMENTS): Likewise.
+ (LDEMUL_OPEN_DYNAMIC_ARCHIVE): Likewise.
+ (LDEMUL_PARSE_ARGS): Likewise.
+ (LDEMUL_ADD_OPTIONS): Likewise.
+ (LDEMUL_HANDLE_OPTION): Likewise.
+ (LDEMUL_UNRECOGNIZED_FILE): Likewise.
+ (LDEMUL_PRINT_SYMBOL): Likewise.
+ (ld_${EMULATION_NAME}_emulation): Removed.
+ Source ${srcdir}/emultempl/emulation.em.
+ * emultempl/beos.em (gld_${EMULATION_NAME}_before_parse):
+ Renamed to ...
+ (gld${EMULATION_NAME}_before_parse): This.
+ (gld_${EMULATION_NAME}_set_symbols): Renamed to ...
+ (gld${EMULATION_NAME}_set_symbols): This.
+ (gld_${EMULATION_NAME}_after_open): Renamed to ...
+ (gld${EMULATION_NAME}_after_open): This.
+ (gld_${EMULATION_NAME}_before_allocation): Renamed to ...
+ (gld${EMULATION_NAME}_before_allocation): This.
+ (gld_${EMULATION_NAME}_get_script): Renamed to ...
+ (gld${EMULATION_NAME}_get_script): This.
+ (LDEMUL_AFTER_OPEN): New.
+ (LDEMUL_BEFORE_ALLOCATION): Likewise.
+ (LDEMUL_PLACE_ORPHAN): Likewise.
+ (LDEMUL_SET_SYMBOLS): Likewise.
+ (LDEMUL_ADD_OPTIONS): Likewise.
+ (LDEMUL_HANDLE_OPTION): Likewise.
+ (ld_${EMULATION_NAME}_emulation): Removed.
+ Source ${srcdir}/emultempl/emulation.em.
+ * emultempl/elf.em (LDEMUL_AFTER_PARSE): New.
+ (LDEMUL_AFTER_OPEN): Likewise.
+ (LDEMUL_BEFORE_PLACE_ORPHANS): Likewise.
+ (LDEMUL_AFTER_ALLOCATION): Likewise.
+ (LDEMUL_SET_OUTPUT_ARCH): Likewise.
+ (LDEMUL_BEFORE_ALLOCATION): Likewise.
+ (LDEMUL_OPEN_DYNAMIC_ARCHIVE): Likewise.
+ (LDEMUL_PLACE_ORPHAN): Likewise.
+ (LDEMUL_ADD_OPTIONS): Likewise.
+ (LDEMUL_HANDLE_OPTION): Likewise.
+ (LDEMUL_LIST_OPTIONS): Likewise.
+ (LDEMUL_UNRECOGNIZED_FILE): Likewise.
+ (ld_${EMULATION_NAME}_emulation): Removed.
+ Source ${srcdir}/emultempl/emulation.em.
+ * emultempl/emulation.em: New file.
+ * emultempl/generic.em (ld_${EMULATION_NAME}_emulation): Removed.
+ Source ${srcdir}/emultempl/emulation.em.
+ * emultempl/msp430.em (LDEMUL_AFTER_OPEN): New.
+ (LDEMUL_AFTER_ALLOCATION): Likewise.
+ (LDEMUL_PLACE_ORPHAN): Likewise.
+ (LDEMUL_FINISH): Likewise.
+ (LDEMUL_ADD_OPTIONS): Likewise.
+ (LDEMUL_HANDLE_OPTION): Likewise.
+ (LDEMUL_LIST_OPTIONS): Likewise.
+ (ld_${EMULATION_NAME}_emulation): Removed.
+ Source ${srcdir}/emultempl/emulation.em.
+ * emultempl/pe.em (gld_${EMULATION_NAME}_before_parse): Renamed
+ to ...
+ (gld${EMULATION_NAME}_before_parse): This.
+ (gld_${EMULATION_NAME}_list_options): Renamed to ...
+ (gld${EMULATION_NAME}_list_options): This.
+ (gld_${EMULATION_NAME}_set_symbols): Renamed to ...
+ (gld${EMULATION_NAME}_set_symbols): This.
+ (gld_${EMULATION_NAME}_after_parse): Renamed to ...
+ (gld${EMULATION_NAME}_after_parse): This.
+ (gld_${EMULATION_NAME}_after_open): Renamed to ...
+ (gld${EMULATION_NAME}_after_open): This.
+ (gld_${EMULATION_NAME}_before_allocation): Renamed to ...
+ (gld${EMULATION_NAME}_before_allocation): This.
+ (gld_${EMULATION_NAME}_unrecognized_file): Renamed to ...
+ (gld${EMULATION_NAME}_unrecognized_file): This.
+ (gld_${EMULATION_NAME}_recognized_file): Renamed to ...
+ (gld${EMULATION_NAME}_recognized_file): This.
+ (gld_${EMULATION_NAME}_finish): Renamed to ...
+ (gld${EMULATION_NAME}_finish): This.
+ (gld_${EMULATION_NAME}_place_orphan): Renamed to ...
+ (gld${EMULATION_NAME}_place_orphan): This.
+ (gld_${EMULATION_NAME}_open_dynamic_archive): Renamed to ...
+ (gld${EMULATION_NAME}_open_dynamic_archive): This.
+ (gld_${EMULATION_NAME}_find_potential_libraries): Renamed to ...
+ (gld${EMULATION_NAME}_find_potential_libraries): This.
+ (gld_${EMULATION_NAME}_get_script): Renamed to ...
+ (gld${EMULATION_NAME}_get_script): This.
+ (LDEMUL_AFTER_PARSE): New.
+ (LDEMUL_AFTER_OPEN): Likewise.
+ (LDEMUL_BEFORE_ALLOCATION): Likewise.
+ (LDEMUL_FINISH=): Likewise.
+ (LDEMUL_OPEN_DYNAMIC_ARCHIVE): Likewise.
+ (LDEMUL_PLACE_ORPHAN): Likewise.
+ (LDEMUL_SET_SYMBOLS): Likewise.
+ (LDEMUL_ADD_OPTIONS): Likewise.
+ (LDEMUL_HANDLE_OPTION): Likewise.
+ (LDEMUL_UNRECOGNIZED_FILE): Likewise.
+ (LDEMUL_LIST_OPTIONS): Likewise.
+ (LDEMUL_RECOGNIZED_FILE): Likewise.
+ (LDEMUL_FIND_POTENTIAL_LIBRARIES): Likewise.
+ (ld_${EMULATION_NAME}_emulation): Removed.
+ Source ${srcdir}/emultempl/emulation.em.
+ * emultempl/pep.em (gld_${EMULATION_NAME}_before_parse): Renamed
+ to ...
+ (gld${EMULATION_NAME}_before_parse): This.
+ (gld_${EMULATION_NAME}_list_options): Renamed to ...
+ (gld${EMULATION_NAME}_list_options): This.
+ (gld_${EMULATION_NAME}_set_symbols): Renamed to ...
+ (gld${EMULATION_NAME}_set_symbols): This.
+ (gld_${EMULATION_NAME}_after_parse): Renamed to ...
+ (gld${EMULATION_NAME}_after_parse): This.
+ (gld_${EMULATION_NAME}_after_open): Renamed to ...
+ (gld${EMULATION_NAME}_after_open): This.
+ (gld_${EMULATION_NAME}_before_allocation): Renamed to ...
+ (gld${EMULATION_NAME}_before_allocation): This.
+ (gld_${EMULATION_NAME}_unrecognized_file): Renamed to ...
+ (gld${EMULATION_NAME}_unrecognized_file): This.
+ (gld_${EMULATION_NAME}_recognized_file): Renamed to ...
+ (gld${EMULATION_NAME}_recognized_file): This.
+ (gld_${EMULATION_NAME}_finish): Renamed to ...
+ (gld${EMULATION_NAME}_finish): This.
+ (gld_${EMULATION_NAME}_place_orphan): Renamed to ...
+ (gld${EMULATION_NAME}_place_orphan): This.
+ (gld_${EMULATION_NAME}_open_dynamic_archive): Renamed to ...
+ (gld${EMULATION_NAME}_open_dynamic_archive): This.
+ (gld_${EMULATION_NAME}_find_potential_libraries): Renamed to ...
+ (gld${EMULATION_NAME}_find_potential_libraries): This.
+ (gld_${EMULATION_NAME}_get_script): Renamed to ...
+ (gld${EMULATION_NAME}_get_script): This.
+ (LDEMUL_AFTER_PARSE): New.
+ (LDEMUL_AFTER_OPEN): Likewise.
+ (LDEMUL_BEFORE_ALLOCATION): Likewise.
+ (LDEMUL_FINISH=): Likewise.
+ (LDEMUL_OPEN_DYNAMIC_ARCHIVE): Likewise.
+ (LDEMUL_PLACE_ORPHAN): Likewise.
+ (LDEMUL_SET_SYMBOLS): Likewise.
+ (LDEMUL_ADD_OPTIONS): Likewise.
+ (LDEMUL_HANDLE_OPTION): Likewise.
+ (LDEMUL_UNRECOGNIZED_FILE): Likewise.
+ (LDEMUL_LIST_OPTIONS): Likewise.
+ (LDEMUL_RECOGNIZED_FILE): Likewise.
+ (LDEMUL_FIND_POTENTIAL_LIBRARIES): Likewise.
+ (ld_${EMULATION_NAME}_emulation): Removed.
+ Source ${srcdir}/emultempl/emulation.em.
+ * emultempl/ticoff.em (gld_${EMULATION_NAME}_list_options):
+ Renamed to ...
+ (gld${EMULATION_NAME}_list_options): This.
+ (gld_${EMULATION_NAME}_before_parse): Renamed to ...
+ (gld_${EMULATION_NAME}_get_script): Renamed to ...
+ (gld${EMULATION_NAME}_get_script): This.
+ (LDEMUL_ADD_OPTIONS): New.
+ (LDEMUL_HANDLE_OPTION): Likewise.
+ (LDEMUL_LIST_OPTIONS): Likewise.
+ (ld_${EMULATION_NAME}_emulation): Removed.
+ Source ${srcdir}/emultempl/emulation.em.
+ * emultempl/vanilla.em (LDEMUL_BEFORE_PARSE): New.
+ (LDEMUL_SET_OUTPUT_ARCH): Likewise.
+ (LDEMUL_GET_SCRIPT): Likewise.
+ (EMULATION_NAME): Likewise.
+ (OUTPUT_FORMAT): Likewise.
+ (ld_vanilla_emulation): Removed.
+ Source ${srcdir}/emultempl/emulation.em.
+
+2022-02-06 Andrew Burgess <aburgess@redhat.com>
+
+ gdb/doc: update docs for 'info win' and 'winheight' commands
+ This started by noticing that the docs for 'winheight' are out of
+ date, the docs currently give a specific list of possible window
+ names. However, now that windows can be implemented in Python, it is
+ not possible to list all possible names.
+
+ I now link the user to a mechanism by which they can discover the
+ valid names for themselves at run time (by using 'info win'). That,
+ and the fact that gdb provides tab-completion of the name at the
+ command line, feels good enough.
+
+ Finally, I noticed that the docs for 'win info' don't explicitly say
+ that the name of the window is given in the output. This could
+ probably have been inferred, but given I'm now linking to this as a
+ mechanism to find the window name, I'd prefer to mention that the name
+ can be found in the output.
+
+2022-02-06 Andrew Burgess <aburgess@redhat.com>
+
+ gdb/tui: add window width information to 'info win' output
+ Now that we support horizontal window placement in the tui, it makes
+ sense to have 'info win' include the width, as well as the height, of
+ the currently visible windows.
+
+ That's what this commit does. Example output is now:
+
+ (gdb) info win
+ Name Lines Columns Focus
+ src 12 40 (has focus)
+ asm 12 41
+ status 1 80
+ cmd 11 80
+
+ I've added a NEWS entry, but the documentation was already suitably
+ vague, it just says that 'info win' displays the size of the visible
+ windows, so I don't think anything needs to be added there.
+
+ I've also added some tests, as far as I could find, the 'info win'
+ command was previously untested.
+
+2022-02-06 GDB Administrator <gdbadmin@sourceware.org>
+
+ Automatic date update in version.in
+
+2022-02-05 H.J. Lu <hjl.tools@gmail.com>
+
+ x86: Skip undefined symbol when finishing DT_RELR
+ Don't abort for undefined symbol when finishing DT_RELR. Instead, skip
+ undefined symbol. Undefined symbol will be reported by relocate_section.
+
+ * elfxx-x86.c (elf_x86_size_or_finish_relative_reloc): Skip
+ undefined symbol in finishing phase.
+
+2022-02-05 Alan Modra <amodra@gmail.com>
+
+ Tweak assembler invocation for pr28827-1 test
+ PR 28827
+ * testsuite/ld-powerpc/pr28827-1.d: Pass -a64 to gas.
+
+2022-02-05 Alan Modra <amodra@gmail.com>
+
+ PR28827 testcase
+ This testcase triggers a stub sizing error with the patches applied
+ for PR28743 (commit 2f83249c13d8 and c804c6f98d34).
+
+ PR 28827
+ * testsuite/ld-powerpc/pr28827-1.s,
+ * testsuite/ld-powerpc/pr28827-1.d: New test.
+ * testsuite/ld-powerpc/powerpc.exp: Run it.
+
+2022-02-05 Alan Modra <amodra@gmail.com>
+
+ Enable "size" as a dumpprog in ld
+ binutils/
+ * testsuite/lib/binutils-common.exp (run_dump_test): Reference
+ global SIZE and SIZEFLAGS.
+ ld/
+ * testsuite/config/default.exp: Define SIZE and SIZEFLAGS.
+
+2022-02-05 Alan Modra <amodra@gmail.com>
+
+ Detect .eh_frame_hdr earlier for SIZEOF_HEADERS
+ Current code detects the need for PT_GNU_EH_FRAME using a field set by
+ _bfd_elf_discard_section_eh_frame_hdr, which is called fairly late in
+ the linking process. Use the elf hash table eh_info instead, which is
+ set up earlier by size_dynamic_sections.
+
+ * elf-bfd.h (struct output_elf_obj_tdata): Delete eh_frame_hdr.
+ (elf_eh_frame_hdr): Don't define.
+ (_bfd_elf_discard_section_eh_frame_hdr): Update prototype.
+ * elf-eh-frame.c (_bfd_elf_discard_section_eh_frame_hdr): Delete
+ abfd parameter. Don't set elf_eh_frame_hdr.
+ * elf.c (elf_eh_frame_hdr): New function.
+ (get_program_header_size): Adjust elf_eh_frame_hdr call.
+ (_bfd_elf_map_sections_to_segments): Likewise.
+
+2022-02-05 Faraz Shahbazker <fshahbazker@wavecomp.com>
+
+ sim: mips: Add simulator support for mips32r6/mips64r6
+ 2022-02-01 Ali Lown <ali.lown@imgtec.com>
+ Andrew Bennett <andrew.bennett@imgtec.com>
+ Dragan Mladjenovic <dragan.mladjenovic@rt-rk.com>
+ Faraz Shahbazker <fshahbazker@wavecomp.com>
+
+ sim/common/ChangeLog:
+ * sim-bits.h (EXTEND9, EXTEND18 ,EXTEND19, EXTEND21,
+ EXTEND26): New macros.
+
+ sim/mips/ChangeLog:
+ * Makefile.in (IGEN_INCLUDE): Add mips3264r6.igen.
+ * configure: Regenerate.
+ * configure.ac: Support mipsisa32r6 and mipsisa64r6.
+ (sim_engine_run): Pick simulator model from processor specified
+ in e_flags.
+ * cp1.c (value_fpr): Handle fmt_dc32.
+ (fp_unary, fp_binary): Zero initialize locals.
+ (update_fcsr, fp_classify, fp_rint, fp_r6_cmp, inner_fmac,
+ fp_fmac, fp_min, fp_max, fp_mina, fp_maxa, fp_fmadd, fp_fmsub):
+ New functions.
+ (sim_fpu_class_mips_mapping): New.
+ * cp1.h (fcsr_ABS2008_mask, fcsr_ABS2008_shift): New define.
+ * interp.c (MIPSR6_P): New.
+ (load_word): Allow unaligned memory access for MIPSR6.
+ * micromips.igen (sc, scd): Adapt to new do_sc* helper signature.
+ * mips.igen: Add *r6 models.
+ (signal_if_cti, forbiddenslot32): New helpers.
+ (delayslot32): Use signal_if_cti.
+ (do_sc, do_scd); Add store_ll_bit parameter.
+ (sc, scd): Adapt to previous change.
+ (nal, beq, bal): New definitions for *r6.
+ (sll): Split nop and ssnop cases into ...
+ (nop, ssnop): New definitions.
+ (loadstore_ea): Use the 32-bit compatibility adressing.
+ (cache): Split logic into ...
+ (do_cache): New helper.
+ (check_fpu): Select IEEE 754-2008 mode for R6.
+ (not_word_value, unpredictable, check_mt_hilo, check_mf_hilo,
+ check_multi_hilo, check_div_hilo, check_u64, do_dmfc1b, add,
+ li, addu, and, andi, bgez, bgtz, blez, bltz, bne, break, dadd,
+ daddiu, daddu, dror, dror32, drorv, dsll, dsll32, dsllv, dsra,
+ dsra32, dsrav, dsrl, dsrl32, dsub, dsubu, j, jal, jalr,
+ jalr.hb, lb, lbu, ld, lh, lhu, lui, lw, lwu, nor, or, ori, ror,
+ rorv, sb, sd, sh, sll, sllv, slt, slti, sltiu, sltu, sra, srav,
+ srl, srlv, sub, subu, sw, sync, syscall, teq, tge, tgeu, tlt,
+ tltu, tne, xor, xori, check_fmt_p, do_load_double,
+ do_store_double, abs.FMT, add.FMT, ceil.l.FMT, ceil.w.FMT,
+ cfc1, ctc1, cvt.d.FMT, cvt.l.FMT, cvt.w.FMT, div.FMT, dfmc1,
+ dmtc1, floor.l.FMT, floor.w.FMT, ldc1, lwc1, mfc1, mov.FMT,
+ mtc1, mul.FMT, recip.FMT, round.l.FMT, round.w.FMT, rsqrt.FMT,
+ sdc1, sqrt.FMT, sub.FMT, swc1, trunc.l.FMT, trunc.w.FMT, bc0f,
+ bc0fl, bc0t, bc0tl, dmfc0, dmtc0, eret, mfc0, mtc0, cop, tlbp,
+ tlbr, tlbwi, tlbwr): Enable on *r6 models.
+ * mips3264r2.igen (dext, dextm, dextu, di, dins, dinsm, dinsu,
+ dsbh, dshd, ei, ext, mfhc1, mthc1, ins, seb, seh, synci, rdhwr,
+ wsbh): Likewise.
+ * mips3264r6.igen: New file.
+ * sim-main.h (FP_formats): Add fmt_dc32.
+ (FORBIDDEN_SLOT): New macros.
+ (simFORBIDDENSLOT, FP_R6CMP_*, FP_R6CLASS_*): New defines.
+ (fp_r6_cmp, fp_classify, fp_rint, fp_min, fp_max, fp_mina,
+ fp_maxa, fp_fmadd, fp_fmsub): New declarations.
+ (R6Compare, Classify, RoundToIntegralExact, Min, Max, MinA,
+ MaxA, FusedMultiplyAdd, FusedMultiplySub): New macros. Wrapping
+ previous declarations.
+
+ sim/testsuite/mips/ChangeLog:
+ * basic.exp: Add r6-*.s tests.
+ (run_r6_removed_test): New function.
+ (run_endian_tests): New function.
+ * hilo-hazard-3.s: Skip for mips*r6.
+ * r2-fpu.s: New test.
+ * r6-64.s: New test.
+ * r6-branch.s: New test.
+ * r6-forbidden.s: New test.
+ * r6-fpu.s: New test.
+ * r6-llsc-dp.s: New test.
+ * r6-llsc-wp.s: New test.
+ * r6-removed.csv: New test.
+ * r6-removed.s: New test.
+ * r6.s: New test.
+ * utils-r6.inc: New inc.
+
+2022-02-05 Faraz Shahbazker <fshahbazker@wavecomp.com>
+
+ sim: Add partial support for IEEE 754-2008
+ 2022-02-01 Faraz Shahbazker <fshahbazker@wavecomp.com>
+
+ sim/common/ChangeLog:
+ * sim-fpu.c (sim_fpu_minmax_nan): New.
+ (sim_fpu_max): Add variant behaviour for IEEE 754-2008.
+ (sim_fpu_min): Likewise.
+ (sim_fpu_is_un, sim_fpu_is_or): New.
+ (sim_fpu_un, sim_fpu_or): New.
+ (sim_fpu_is_ieee754_2008, sim_fpu_is_ieee754_1985): New.
+ (sim_fpu_set_mode): New.
+ (sim_fpu_classify): New.
+ * sim-fpu.h (sim_fpu_minmax_nan): New declaration.
+ (sim_fpu_un, sim_fpu_or): New declarations.
+ (sim_fpu_is_un, sim_fpu_is_or): New declarations.
+ (sim_fpu_mode): New enum.
+ [sim_fpu_state](current_mode): New field.
+ (sim_fpu_current_mode): New define.
+ (sim_fpu_is_ieee754_2008): New declaration.
+ (sim_fpu_is_ieee754_1985): New declaration.
+ (sim_fpu_set_mode): New declaration.
+ (sim_fpu_classify): New declaration.
+
+2022-02-05 Faraz Shahbazker <fshahbazker@wavecomp.com>
+
+ sim: Factor out NaN handling in floating point operations
+ 2022-02-01 Faraz Shahbazker <fshahbazker@wavecomp.com>
+
+ sim/common/ChangeLog:
+ * sim-fpu.c (sim_fpu_op_nan): New.
+ (sim_fpu_add): Factor out NaN operand handling with
+ a call to sim_fpu_op_nan.
+ (sim_fpu_sub, sim_fpu_mul, sim_fpu_div): Likewise.
+ (sim_fpu_rem, sim_fpu_max, sim_fpu_min): Likewise.
+ * sim-fpu.h (sim_fpu_op_nan): New declaration.
+
+2022-02-05 Faraz Shahbazker <fshahbazker@wavecomp.com>
+
+ sim: Allow toggling of quiet NaN-bit semantics
+ IEEE754-1985 specifies the top bit of the mantissa as an indicator
+ of signalling vs. quiet NaN, but does not define the precise semantics.
+ Most architectures treat this bit as indicating quiet NaN, but legacy
+ (pre-R6) MIPS goes the other way and treats it as signalling NaN.
+
+ This used to be controlled by a macro that was only defined for MIPS.
+ This patch replaces the macro with a variable to track the current
+ semantics of the NaN bit and allows differentiation between older
+ (pre-R6) and and newer MIPS cores.
+
+ 2022-02-01 Faraz Shahbazker <fshahbazker@wavecomp.com>
+
+ sim/common/ChangeLog:
+ * sim-fpu.c (_sim_fpu): New.
+ (pack_fpu, unpack_fpu): Allow reversal of quiet NaN semantics.
+ * sim-fpu.h (sim_fpu_state): New struct.
+ (_sim_fpu): New extern.
+ (sim_fpu_quiet_nan_inverted): New define.
+
+ sim/mips/ChangeLog:
+ * cp1.h (fcsr_NAN2008_mask, fcsr_NAN2008_shift): New.
+ * mips.igen (check_fpu): Select default quiet NaN mode
+ for legacy MIPS.
+ * sim-main.h (SIM_QUIET_NAN_NEGATED): Remove.
+
+2022-02-05 GDB Administrator <gdbadmin@sourceware.org>
+
+ Automatic date update in version.in
+
+2022-02-04 H.J. Lu <hjl.tools@gmail.com>
+
+ ld: Remove emultempl/armcoff.em
+ Remove emultempl/armcoff.em which has been unused after
+
+ commit 2ac93be706418f3b2aebeb22159a328023faed52
+ Author: Alan Modra <amodra@gmail.com>
+ Date: Mon Apr 16 20:33:36 2018 +0930
+
+ Remove arm-aout and arm-coff support
+
+ This also removes arm-netbsd (not arm-netbsdelf!), arm-openbsd, and
+ arm-riscix. Those targets weren't on the obsolete list but they are
+ all aout, and it doesn't make all that much sense to remove arm-aout
+ without removing them too.
+
+ * emultempl/armcoff.em: Removed.
+
+2022-02-04 Simon Marchi <simon.marchi@efficios.com>
+
+ gdb: include jit_code_entry::symfile_addr value in names of objfiles created by jit reader API
+ This commit includes the JIT object's symfile address in the names of
+ objfiles created by JIT reader API (e.g., << JIT compiled code at
+ 0x7ffd8a0c77a0 >>). This allows one to at least differentiate one from
+ another.
+
+ The address is the one that the debugged program has put in
+ jit_code_entry::symfile_addr, and that the JIT reader's read function
+ receives. As we can see in gdb.base/jit-reader-host.c and
+ gdb.base/jit-reader.c, that may not be the actual value of where the
+ JIT-ed code is. But it is a value chosen by the author of the JIT
+ engine and the JIT reader, so including this value in the objfile name
+ may help them correlate the JIT objfiles created by with their logs /
+ data structures.
+
+ To access this field, we need to pass down a reference to the
+ jit_code_entry. So make jit_dbg_reader_data a structure (instead of an
+ alias for a CORE_ADDR) that includes the address of the code entry in
+ the inferior's address space (the previous meaning of
+ jit_dbg_reader_data) plus a reference to the jit_code_entry as read into
+ GDB's address space. And while at it, pass down the gdbarch, so that we
+ don't have to call target_gdbarch.
+
+ Co-Authored-By: Jan Vrany <jan.vrany@labware.com>
+ Change-Id: Ib26c4d1bd8de503d651aff89ad2e500cb312afa5
+
+2022-02-04 Tom Tromey <tromey@adacore.com>
+
+ Improve Ada unchecked union type printing
+ Currently, "ptype" of an Ada unchecked union may show a
+ compiler-generated wrapper structure in its output. It's more
+ Ada-like to elide this structure, which is what this patch implements.
+ It turned out to be simplest to reuse a part of print_variant_clauses
+ for this.
+
+ As this is Ada-specific, and Joel already reviewed it internally, I am
+ going to check it in.
+
+2022-02-04 Tom Tromey <tromey@adacore.com>
+
+ Remove host_hex_value
+ I noticed that host_hex_value is redundant, because gdbsupport already
+ has fromhex. This patch removes the former in favor of the latter.
+
+ Regression tested on x86-64 Fedora 34.
+
+2022-02-04 Andi Kleen <andi@firstfloor.org>
+
+ Support symbol+offset lookup in addr2line
+ The Linux kernel usually ouputs symbol+offset instead of plain code
+ addresses these days, to avoid leaking ASLR secrets and to handle
+ dynamically loaded modules.
+
+ Converting those with addr2line is somewhat involved: it requires
+ looking up the symbol first using nm and then manually compute the
+ offset, and then pass it to addr2line.
+
+ This patch implements the necessary steps directly in addr2line,
+ by looking up the symbol (with demangling if needed) and computing
+ the offset.
+
+ It's possible that a symbol is ambigious with a hex number. In this
+ case it uses the symbol lookup if the string contains a +. When it isn't
+ ambigious the + is optional.
+
+2022-02-04 GDB Administrator <gdbadmin@sourceware.org>
+
+ Automatic date update in version.in
+
+2022-02-03 Cary Coutant <ccoutant@gmail.com>
+
+ Rename EM_56800V4 to EM_56800EF.
+ include/elf:
+ * common.h: Rename EM_56800V4 to EM_56800EF.
+
+2022-02-03 H.J. Lu <hjl.tools@gmail.com>
+
+ x86: Update X86_64_GOT_TYPE_P to cover more GOT relocations
+ Add R_X86_64_GOT32, R_X86_64_GOT64, R_X86_64_GOTPCREL64 and
+ R_X86_64_GOTPLT64 to X86_64_GOT_TYPE_P to cover more GOT relocations.
+
+ PR ld/28858
+ * elfxx-x86.h (X86_64_GOT_TYPE_P): Add R_X86_64_GOT32,
+ R_X86_64_GOT64, R_X86_64_GOTPCREL64 and R_X86_64_GOTPLT64.
+
+2022-02-03 Cary Coutant <ccoutant@gmail.com>
+
+ Add new e_machine values.
+ include/elf:
+ * common.h: Add EM_U16_U8CORE, EM_TACHYUM, EM_56800V4.
+
+2022-02-03 Tankut Baris Aktemur <tankut.baris.aktemur@intel.com>
+
+ testsuite: fix failure in gdb.threads/killed-outside.exp
+ Starting with commit
+
+ commit 1da5d0e664e362857153af8682321a89ebafb7f6
+ Date: Tue Jan 4 08:02:24 2022 -0700
+
+ Change how Python architecture and language are handled
+
+ we see a failure in gdb.threads/killed-outside.exp:
+
+ ...
+ Executing on target: kill -9 16622 (timeout = 300)
+ builtin_spawn -ignore SIGHUP kill -9 16622
+ continue
+ Continuing.
+ Couldn't get registers: No such process.
+ (gdb) [Thread 0x7ffff77c2700 (LWP 16626) exited]
+
+ Program terminated with signal SIGKILL, Killed.
+ The program no longer exists.
+ FAIL: gdb.threads/killed-outside.exp: prompt after first continue (timeout)
+
+ This is not a regression but a failure due to a change in GDB's
+ output. Prior to the aforementioned commit, GDB has been printing the
+ "Couldn't get registers: No such process." message twice. The second
+ one came from
+
+ (top-gdb) bt
+ #0 amd64_linux_nat_target::fetch_registers (this=0x555557f31440 <the_amd64_linux_nat_target>, regcache=0x555558805ce0, regnum=16) at /gdb-up/gdb/amd64-linux-nat.c:225
+ #1 0x000055555640ac5f in target_ops::fetch_registers (this=0x555557d636d0 <the_thread_db_target>, arg0=0x555558805ce0, arg1=16) at /gdb-up/gdb/target-delegates.c:502
+ #2 0x000055555641a647 in target_fetch_registers (regcache=0x555558805ce0, regno=16) at /gdb-up/gdb/target.c:3945
+ #3 0x0000555556278e68 in regcache::raw_update (this=0x555558805ce0, regnum=16) at /gdb-up/gdb/regcache.c:587
+ #4 0x0000555556278f14 in readable_regcache::raw_read (this=0x555558805ce0, regnum=16, buf=0x555558881950 "") at /gdb-up/gdb/regcache.c:601
+ #5 0x00005555562792aa in readable_regcache::cooked_read (this=0x555558805ce0, regnum=16, buf=0x555558881950 "") at /gdb-up/gdb/regcache.c:690
+ #6 0x000055555627965e in readable_regcache::cooked_read_value (this=0x555558805ce0, regnum=16) at /gdb-up/gdb/regcache.c:748
+ #7 0x0000555556352a37 in sentinel_frame_prev_register (this_frame=0x555558181090, this_prologue_cache=0x5555581810a8, regnum=16) at /gdb-up/gdb/sentinel-frame.c:53
+ #8 0x0000555555fa4773 in frame_unwind_register_value (next_frame=0x555558181090, regnum=16) at /gdb-up/gdb/frame.c:1235
+ #9 0x0000555555fa420d in frame_register_unwind (next_frame=0x555558181090, regnum=16, optimizedp=0x7fffffffd570, unavailablep=0x7fffffffd574, lvalp=0x7fffffffd57c, addrp=0x7fffffffd580,
+ realnump=0x7fffffffd578, bufferp=0x7fffffffd5b0 "") at /gdb-up/gdb/frame.c:1143
+ #10 0x0000555555fa455f in frame_unwind_register (next_frame=0x555558181090, regnum=16, buf=0x7fffffffd5b0 "") at /gdb-up/gdb/frame.c:1199
+ #11 0x00005555560178e2 in i386_unwind_pc (gdbarch=0x5555587c4a70, next_frame=0x555558181090) at /gdb-up/gdb/i386-tdep.c:1972
+ #12 0x0000555555cd2b9d in gdbarch_unwind_pc (gdbarch=0x5555587c4a70, next_frame=0x555558181090) at /gdb-up/gdb/gdbarch.c:3007
+ #13 0x0000555555fa3a5b in frame_unwind_pc (this_frame=0x555558181090) at /gdb-up/gdb/frame.c:948
+ #14 0x0000555555fa7621 in get_frame_pc (frame=0x555558181160) at /gdb-up/gdb/frame.c:2572
+ #15 0x0000555555fa7706 in get_frame_address_in_block (this_frame=0x555558181160) at /gdb-up/gdb/frame.c:2602
+ #16 0x0000555555fa77d0 in get_frame_address_in_block_if_available (this_frame=0x555558181160, pc=0x7fffffffd708) at /gdb-up/gdb/frame.c:2665
+ #17 0x0000555555fa5f8d in select_frame (fi=0x555558181160) at /gdb-up/gdb/frame.c:1890
+ #18 0x0000555555fa5bab in lookup_selected_frame (a_frame_id=..., frame_level=-1) at /gdb-up/gdb/frame.c:1720
+ #19 0x0000555555fa5e47 in get_selected_frame (message=0x0) at /gdb-up/gdb/frame.c:1810
+ #20 0x0000555555cc9c6e in get_current_arch () at /gdb-up/gdb/arch-utils.c:848
+ #21 0x000055555625b239 in gdbpy_before_prompt_hook (extlang=0x555557451f20 <extension_language_python>, current_gdb_prompt=0x555557f4d890 <top_prompt+16> "(gdb) ")
+ at /gdb-up/gdb/python/python.c:1063
+ #22 0x0000555555f7cfbb in ext_lang_before_prompt (current_gdb_prompt=0x555557f4d890 <top_prompt+16> "(gdb) ") at /gdb-up/gdb/extension.c:922
+ #23 0x0000555555f7d442 in std::_Function_handler<void (char const*), void (*)(char const*)>::_M_invoke(std::_Any_data const&, char const*&&) (__functor=...,
+ __args#0=@0x7fffffffd900: 0x555557f4d890 <top_prompt+16> "(gdb) ") at /usr/include/c++/7/bits/std_function.h:316
+ #24 0x0000555555f752dd in std::function<void (char const*)>::operator()(char const*) const (this=0x55555817d838, __args#0=0x555557f4d890 <top_prompt+16> "(gdb) ")
+ at /usr/include/c++/7/bits/std_function.h:706
+ #25 0x0000555555f75100 in gdb::observers::observable<char const*>::notify (this=0x555557f49060 <gdb::observers::before_prompt>, args#0=0x555557f4d890 <top_prompt+16> "(gdb) ")
+ at /gdb-up/gdb/../gdbsupport/observable.h:150
+ #26 0x0000555555f736dc in top_level_prompt () at /gdb-up/gdb/event-top.c:444
+ #27 0x0000555555f735ba in display_gdb_prompt (new_prompt=0x0) at /gdb-up/gdb/event-top.c:411
+ #28 0x00005555564611a7 in tui_on_command_error () at /gdb-up/gdb/tui/tui-interp.c:205
+ #29 0x0000555555c2173f in std::_Function_handler<void (), void (*)()>::_M_invoke(std::_Any_data const&) (__functor=...) at /usr/include/c++/7/bits/std_function.h:316
+ #30 0x0000555555e10c20 in std::function<void ()>::operator()() const (this=0x5555580f9028) at /usr/include/c++/7/bits/std_function.h:706
+ #31 0x0000555555e10973 in gdb::observers::observable<>::notify() const (this=0x555557f48d20 <gdb::observers::command_error>) at /gdb-up/gdb/../gdbsupport/observable.h:150
+ #32 0x00005555560e9b3f in start_event_loop () at /gdb-up/gdb/main.c:438
+ #33 0x00005555560e9bcc in captured_command_loop () at /gdb-up/gdb/main.c:481
+ #34 0x00005555560eb616 in captured_main (data=0x7fffffffddd0) at /gdb-up/gdb/main.c:1348
+ #35 0x00005555560eb67c in gdb_main (args=0x7fffffffddd0) at /gdb-up/gdb/main.c:1363
+ #36 0x0000555555c1b6b3 in main (argc=12, argv=0x7fffffffded8) at /gdb-up/gdb/gdb.c:32
+
+ Commit 1da5d0e664 eliminated the call to 'get_current_arch'
+ in 'gdbpy_before_prompt_hook'. Hence, the second instance of
+ "Couldn't get registers: No such process." does not appear anymore.
+
+ Fix the failure by updating the regular expression in the test.
+
+2022-02-03 Alan Modra <amodra@gmail.com>
+
+ PowerPC64 treatment of absolute symbols
+ Supporting -static-pie on PowerPC64 requires the linker to properly
+ treat SHN_ABS symbols for cases like glibc's _nl_current_LC_CTYPE_used
+ absolute symbol. I've been slow to fix the linker on powerpc because
+ there is some chance that this will break some shared libraries or
+ PIEs.
+
+ bfd/
+ * elf64-ppc.c (ppc64_elf_check_relocs): Consolidate local sym
+ handling code. Don't count dyn relocs against non-dynamic
+ absolute symbols.
+ (dec_dynrel_count): Adjust to suit.
+ (ppc64_elf_edit_toc): Don't remove entries for absolute symbols
+ when pic.
+ (allocate_got): Don't allocate space for got relocs against
+ non-dynamic absolute syms.
+ (ppc64_elf_layout_multitoc): Likewise.
+ (got_and_plt_relr): Likewise.
+ (ppc64_elf_size_dynamic_sections): Likewise for local got.
+ (got_and_plt_relr_for_local_syms): Likewise.
+ (ppc64_elf_size_stubs): Don't allocate space for relr either.
+ (ppc64_elf_relocate_section): Don't write relocs against non-dynamic
+ absolute symbols. Don't optimise got and toc code sequences
+ loading absolute symbol entries.
+ ld/
+ * testsuite/ld-powerpc/abs-reloc.s,
+ * testsuite/ld-powerpc/abs-static.d,
+ * testsuite/ld-powerpc/abs-static.r,
+ * testsuite/ld-powerpc/abs-pie.d,
+ * testsuite/ld-powerpc/abs-pie.r,
+ * testsuite/ld-powerpc/abs-shared.d,
+ * testsuite/ld-powerpc/abs-shared.r,
+ * testsuite/ld-powerpc/abs-pie-relr.d,
+ * testsuite/ld-powerpc/abs-pie-relr.r,
+ * testsuite/ld-powerpc/abs-shared-relr.d,
+ * testsuite/ld-powerpc/abs-shared-relr.r: New tests.
+ * testsuite/ld-powerpc/powerpc.exp: Run them.
+
+2022-02-03 GDB Administrator <gdbadmin@sourceware.org>
+
+ Automatic date update in version.in
+
+2022-02-02 Nick Clifton <nickc@redhat.com>
+
+ Stop the BFD library complaining about compressed dwarf debug string sections being too big.
+ PR 28834
+ * dwarf2.c (read_section): Change the heuristic that checks for
+ overlarge dwarf debug info sections.
+
+2022-02-02 Andrew Burgess <aburgess@redhat.com>
+
+ gdb: fix formatting for help set/show extended-prompt
+ The formatting of the help text for 'help set extended-prompt' and
+ 'help show extended-prompt' is a little off.
+
+ Here's the offending snippet:
+
+ Substitutions are applied to VALUE to compute the real prompt.
+
+ The currently defined substitutions are:
+ \[ Begins a sequence of non-printing characters.
+ \\ A backslash.
+ \] Ends a sequence of non-printing characters.
+ \e The ESC character.
+
+ Notice that the line for '\[' is indented more that the others.
+
+ Turns out this is due to how we build this help text, something which
+ is done in Python. We extended a classes __doc__ string with some
+ dynamically generated text.
+
+ The classes doc string looks like this:
+
+ """Set the extended prompt.
+
+ Usage: set extended-prompt VALUE
+
+ Substitutions are applied to VALUE to compute the real prompt.
+
+ The currently defined substitutions are:
+ """
+
+ Notice the closing """ are in a line of their own, and include some
+ white space just before. It's this extra white space that's causing
+ the problem.
+
+ Fix the formatting issue by moving the """ to the end of the previous
+ line. I then add the extra newline in at the point where the doc
+ string is merged with the dynamically generated text.
+
+ Now everything lines up correctly.
+
+2022-02-02 Andrew Burgess <aburgess@redhat.com>
+
+ gdb: test to check one aspect of the linespec parsing code
+ While working on the fix for PR cli/28665 (see previous couple of
+ commits), I was playing with making a change in the linespec parsing
+ code. Specifically, I was thinking about whether the spec_string for
+ LINESPEC_LOCATION locations should ever be nullptr.
+
+ I made a change to prevent the spec_string from ever being nullptr,
+ tested gdb, and saw no regressions.
+
+ However, as part of this work I was reviewing how the breakpoint code
+ handles this case (spec_string being nullptr), and spotted that in
+ parse_breakpoint_sals the nullptr case is specifically handled, so
+ changing this should have caused a regression. But I didn't see one.
+
+ So, this commit adds a comment in location.c mentioning that the
+ nullptr case is (a) not an oversight, and (b) is required. Then I add
+ a new test to gdb.base/break.exp that ensures a change in this area
+ will cause a regression.
+
+ This test passes on current gdb, but with my modified (and broken)
+ gdb, the test would fail.
+
+2022-02-02 Andrew Burgess <aburgess@redhat.com>
+
+ gdb: handle calls to edit command passing only a linespec condition
+ While working on the previous commit to fix PR cli/28665, I noticed
+ that the 'edit' command would suffer from the same problem. That is,
+ something like:
+
+ (gdb) edit task 123
+
+ would cause GDB to break. For a full explanation of what's going on
+ here, see the commit message for the previous commit.
+
+ As with the previous commit, this issue can be prevented by detecting,
+ and throwing, a junk at the end of the line error earlier, before
+ calling decode_line_1.
+
+ So, that's what this commit does. I've also added some tests for this
+ issue.
+
+ Bug: https://sourceware.org/bugzilla/show_bug.cgi?id=28665
+
+2022-02-02 Andrew Burgess <aburgess@redhat.com>
+
+ gdb: handle calls to list command passing only a linespec condition
+ In PR cli/28665, it was reported that GDB would crash when given a
+ command like:
+
+ (gdb) list task 123
+
+ The problem here is that in cli/cli-cmd.c:list_command, the string
+ 'task 123' is passed to string_to_event_location in find a location
+ specification. However, this location parsing understands about
+ breakpoint conditions, and so, will stop parsing when it sees
+ something that looks like a condition, in this case, the 'task 123'
+ looks like a breakpoint condition.
+
+ As a result, the location we get back from string_to_event_location
+ has no actual location specification attached to it. The actual call
+ path is:
+
+ list_command
+ string_to_event_location
+ string_to_event_location_basic
+ new_linespec_location
+
+ In new_linespec_location we call linespec_lex_to_end, which looks at
+ 'task 123' and decides that there's nothing there that describes a
+ location. As such, in new_linespec_location, the spec_string field of
+ the location is left as nullptr.
+
+ Back in list_command we then call decode_line_1, which calls
+ event_location_to_sals, which calls parse_linespec, which takes the
+ spec_string we found earlier, and tries to converts this into a list
+ of sals.
+
+ However, parse_linespec is not intended to be passed a nullptr, for
+ example, calling is_ada_operator will try to access through the
+ nullptr, causing undefined behaviour. But there are other cases
+ within parse_linespec which don't expect to see a nullptr.
+
+ When looking at how to fix this issue, I first considered having
+ linespec_lex_to_end detect the problem. That function understands
+ when the first thing in the linespec is a condition keyword, and so,
+ could throw an error saying something like: "no linespec before
+ condition keyword", however, this is not going to work, at least, not
+ without additional changes to GDB, it is valid to place a breakpoint
+ like:
+
+ (gdb) break task 123
+
+ This will place a breakpoint at the current location with the
+ condition 'task 123', and changing linespec_lex_to_end breaks this
+ behaviour.
+
+ So, next, I considered what would happen if I added a condition to an
+ otherwise valid list command, this is what I see:
+
+ (gdb) list file.c:1 task 123
+ Junk at end of line specification.
+ (gdb)
+
+ So, then I wondered, could we just pull the "Junk" detection forward,
+ so that we throw the error earlier, before we call decode_line_1?
+
+ It turns out that yes we can. Well, sort of.
+
+ It is simpler, I think, to add a separate check into the list_command
+ function, after calling string_to_event_location, but before calling
+ decode_line_1. We know when we call string_to_event_location that the
+ string in question is not empty, so, after calling
+ string_to_event_location, if non of the string has been consumed, then
+ the content of the string must be junk - it clearly doesn't look like
+ a location specification.
+
+ I've reused the same "Junk at end of line specification." error for
+ consistency, and added a few tests to cover this issue.
+
+ While the first version of this patch was on the mailing list, a
+ second bug PR gdb/28797 was raised. This was for a very similar
+ issue, but this time the problem command was:
+
+ (gdb) list ,,
+
+ Here the list command understands about the first comma, list can have
+ two arguments separated by a comma, and the first argument can be
+ missing. So we end up trying to parse the second command "," as a
+ linespec.
+
+ However, in linespec_lex_to_end, we will stop parsing a linespec at a
+ comma, so, in the above case we end up with an empty linespec (between
+ the two commas), and, like above, this results in the spec_string
+ being nullptr.
+
+ As with the previous case, I've resolved this issue by adding an extra
+ check for junk at the end of the line - after parsing (or failing to
+ parse) the nothing between the two commas, we still have the "," left
+ at the end of the list command line - when we see this we can throw
+ the same "junk at the end of the line" error, and all is good.
+
+ I've added tests for this case too.
+
+ Bug: https://sourceware.org/bugzilla/show_bug.cgi?id=28665
+ Bug: https://sourceware.org/bugzilla/show_bug.cgi?id=28797
+
+2022-02-02 Andrew Burgess <aburgess@redhat.com>
+
+ gdb/testsuite: move linespec test into gdb.linespec/ directory
+ The gdb.base/linespecs.exp test should really live in the gdb.linespec
+ directory, so lets move it there.
+
+ As we already have gdb.linespec/linespec.exp, I've renamed the test to
+ gdb.linespec/errors.exp, as this better reflects what the test is
+ actually checking.
+
+ Finally, the test script doesn't have its own source file, it was
+ reusing a random other source file, gdb.base/memattr.c. Now the tests
+ script is in gdb.linespec/, I've updated the test to use a different
+ source file from that directory.
+
+2022-02-02 Andrew Burgess <aburgess@redhat.com>
+
+ gdb: add empty string check in parse_linespec
+ If parse_linespec (linespec.c) is passed ARG as an empty string then
+ we end up calling `strchr (linespec_quote_characters, '\0')`, which
+ will return a pointer to the '\0' at the end of
+ linespec_quote_characters. This then results in GDB calling
+ skip_quote_char with `ARG + 1`, which is undefined behaviour (as ARG
+ only contained a single character, the '\0').
+
+ Fix this by checking for the first character of ARG being '\0' before
+ the call to strchr.
+
+ I have additionally added an assertion that ARG can't itself be
+ nullptr, as calling is_ada_operator with nullptr can end up calling
+ 'startswith' on the nullptr, which is undefined behaviour.
+
+ Finally, I moved the declaration of TOKEN into the body of
+ parse_linespec, to where TOKEN is defined.
+
+ This patch came about while I was working on fixes for PR cli/28665
+ and PR gdb/28797. The actual fixes for these two issues will be in a
+ later commit in this series, but, with this patch in place, both of
+ the above bugs would hit the new assertion rather than accessing
+ invalid memory and crashing. The '\0' check is not currently ever
+ hit, but just makes the code a little safer.
+
+ Because this patch only changes the nature of the failure for the
+ above two bugs, there's no tests here. A later commit will fix the
+ above two issues, at which point I'll add some tests.
+
+ Bug: https://sourceware.org/bugzilla/show_bug.cgi?id=28665
+ Bug: https://sourceware.org/bugzilla/show_bug.cgi?id=28797
+
+2022-02-02 Andrew Burgess <aburgess@redhat.com>
+
+ gdb: update the comment on string_to_event_location
+ The comment on string_to_event_location is (I believe) out of date.
+ This commit fixes the two issues I see:
+
+ 1. This function can't return NULL any more. The implementation
+ calls string_to_explicit_location which can return NULL, but if this
+ is the case we then call string_to_event_location_basic, which I
+ don't believe can ever return NULL.
+
+ 2. I've removed the mention that the returned string is malloc'd,
+ though this is true, now that we return a managed pointer, I believe
+ the source of the memory allocation is irrelevant, and so, shouldn't
+ be discussed in the header comment.
+
+ There should be no user visible changes after this commit.
+
+2022-02-02 Nick Clifton <nickc@redhat.com>
+
+ Updated French translation for the ld/ and gold/ sub-directories
+
+2022-02-02 Stafford Horne <shorne@gmail.com>
+
+ or1k: Avoid R_OR1K_GOT16 signed overflow by using special howto
+ Previously when fixing PR 21464 we masked out upper bits of the
+ relocation value in order to avoid overflow complaints when acceptable.
+ It turns out this does not work when the relocation value ends up being
+ signed.
+
+ To fix this this patch introduces a special howto with
+ complain_on_overflow set to complain_overflow_dont. This is used in
+ place of the normal R_OR1K_GOT16 howto when we detect R_OR1K_GOT_AHI16
+ relocations.
+
+ bfd/ChangeLog:
+
+ PR 28735
+ * elf32-or1k.c (or1k_elf_got16_no_overflow_howto): Define.
+ (or1k_elf_relocate_section): Use new howto instead of trying to
+ mask out relocation bits.
+
+2022-02-02 GDB Administrator <gdbadmin@sourceware.org>
+
+ Automatic date update in version.in
+
+2022-02-01 Tom Tromey <tromey@adacore.com>
+
+ Fix flex rule in gdb
+ Currently, if flex fails, it will leave the resulting .c file in the
+ tree. This will cause a cascade of errors, and requires the manual
+ deletion of the .c file in order to recreate the problem.
+
+ It's better for the rule to fail such that the .c file is not updated.
+ This way, 'make' will fail the same way every time -- which is much
+ handier for debugging syntax errors.
+
+ This fix just updates the Makefile rule to follow the way that the
+ "yacc" rule already works.
+
+2022-02-01 Markus Metzger <markus.t.metzger@intel.com>
+
+ gdb, btrace: improve error messages
+ When trying to use 'record btrace' on a system that does not support it,
+ the error message isn't as clear as it could be. See
+ https://sourceware.org/pipermail/gdb/2022-January/049870.html.
+
+ Improve the error message in a few cases.
+
+ Reported-by: Simon Sobisch <simonsobisch@gnu.org>
+
+2022-02-01 Jan Vrany <jan.vrany@labware.com>
+
+ gdb/python: fix gdb.Objfile.__repr__ () for dynamically compiled code
+ While experimenting with JIT reader API I realized that calling repr ()
+ on objfile created by JIT reader crashes GDB.
+
+ The problem was that objfpy_repr () called objfile_filename () which
+ returned NULL, causing PyString_FromFormat () to crash.
+
+ This commit fixes this problem by using objfile_name () instead of
+ objfile_filename (). This also makes consistent with the value of gdb.Objfile.filename variable.
+
+2022-02-01 Samuel Thibault <samuel.thibault@gnu.org>
+
+ hurd: Fix RPC prototypes
+ The last updates of MIG introduced qualifying strings and arrays with
+ const as appropriate. We thus have to update the protypes in gdb too.
+
+ Change-Id: I3f72aac1dfa6e58d1394d5776b822d7c8f2409df
+
+2022-02-01 Samuel Thibault <samuel.thibault@gnu.org>
+
+ hurd: Fix RPC link names
+ The RPC stub code expects to be calling a C function, not a C++
+ function.
+
+ Change-Id: Idd7549fc118f2addc7fb4975667a011cacacc03f
+
+2022-02-01 GDB Administrator <gdbadmin@sourceware.org>
+
+ Automatic date update in version.in
+
+2022-01-31 H.J. Lu <hjl.tools@gmail.com>
+
+ elf: Check symbol version without any symbols
+ VER_FLG_WEAK doesn't indicate that all symbol references of the symbol
+ version have STB_WEAK. VER_FLG_WEAK indicates a weak symbol version
+ definition with no symbols associated with it. It is used to verify
+ the existence of a particular implementation without any symbol references
+ to the weak symbol version.
+
+ PR ld/24718
+ * testsuite/ld-elf/pr24718-1.d: New file.
+ * testsuite/ld-elf/pr24718-1.s: Likewise.
+ * testsuite/ld-elf/pr24718-1.t: Likewise.
+
+2022-01-31 H.J. Lu <hjl.tools@gmail.com>
+
+ Load debug section only when dumping debug sections
+ Don't load debug sections if we aren't dumping any debug sections.
+
+ PR binutils/28843
+ * objdump.c (dump_any_debugging): New.
+ (load_debug_section): Return false if dump_any_debugging isn't
+ set.
+ (main): Set dump_any_debugging when dumping any debug sections.
+ * readelf (dump_any_debugging): New.
+ (parse_args): Set dump_any_debugging when dumping any debug
+ sections.
+ (load_debug_section): Return false if dump_any_debugging isn't
+ set.
+
+2022-01-31 Simon Marchi <simon.marchi@efficios.com>
+
+ gdb: fix some clang-tidy readability-misleading-indentation warnings
+ I have warnings like these showing in my editor all the time, so I
+ thought I'd run clang-tidy with this diagnostic on all the files (that I
+ can compile) and fix them.
+
+ There is still one warning, in utils.c, but that's because some code
+ is mixed up with preprocessor macros (#ifdef TUI), so I think there no
+ good solution there.
+
+ Change-Id: I345175fc7dd865318f0fbe61ac026c88c3b6a96b
+
+2022-01-31 Nils-Christian Kempke <nils-christian.kempke@intel.com>
+
+ gdb, testsuite, fortran: adapt info symbol expected output for intel compilers
+ Info symbol is expected to print the symbol table name of a symbol, since
+ symbol lookup happens via the minimal symbol table. This name
+ corresponds to the linkage name in the full symbol table.
+
+ For gfortran (and maybe others) these names currently have the form
+ XXXX.NUMBER where XXXX is the symbol name and NUMBER a compiler
+ generated appendix for mangling.
+ An example taken from the modified nested-funcs-2.exp would be
+
+ ~~~~
+ $ objdump -t ./outputs/gdb.fortran/nested-funcs-2/nested-funcs-2 | grep \
+ increment
+ 00000000000014ab l F .text 0000000000000095 increment.3883
+ 000000000000141c l F .text 000000000000008f increment_program_global.3881
+ ~~~~
+
+ This mangled name gets recognized by the Ada demangler/decoder and decoded as
+ Ada to XXXX (setting the symbol language to Ada). This leads to output
+ of XXXX over XXXX.NUMBER for info symbol on gfortran symbols.
+
+ For ifort and ifx the generated linkage names have the form
+ SCOPEA_SCOPEB_XXXX_ which are not recognized by the Ada decoder (or any
+ other demangler for that matter) and thus printed as is.
+ The respective objdump in the above case looks like
+
+ ~~~~
+ $ objdump -t ./outputs/gdb.fortran/nested-funcs-2/nested-funcs-2 | grep \
+ increment
+ 0000000000403a44 l F .text 0000000000000074 contains_keyword_IP_increment_
+ 0000000000403ab8 l F .text 0000000000000070
+ contains_keyword_IP_increment_program_global_
+ ~~~~
+
+ In the unmodified testcase this results in 'fails' when ran with the intel
+ compilers:
+
+ ~~~~
+ >> make check RUNTESTFLAGS="gdb.fortran/nested-funcs-2.exp \
+ GDBFLAGS='$GDBFLAGS' CC_FOR_TARGET='icpc' F90_FOR_TARGET='ifort'"
+
+ ...
+
+ === gdb Summary ===
+
+ \# of expected passes 80
+ \# of unexpected failures 14
+ ~~~~
+
+ Note that there is no Fortran mangling standard. We keep the gfortran
+ behavior as is and modify the test to reflect ifx and ifort mangled
+ names which fixes above fails.
+
+2022-01-31 Nick Clifton <nickc@redhat.com>
+
+ Import patch from mainline GCC to fix an infinite recusion in the Rust demangler.
+ PR 98886
+ PR 99935
+ * rust-demangle.c (struct rust_demangler): Add a recursion
+ counter.
+ (demangle_path): Increment/decrement the recursion counter upon
+ entry and exit. Fail if the counter exceeds a fixed limit.
+ (demangle_type): Likewise.
+ (rust_demangle_callback): Initialise the recursion counter,
+ disabling if requested by the option flags.
+
+2022-01-31 Alan Modra <amodra@gmail.com>
+
+ Re: PR28827, assertion building LLVM 9 on powerpc64le-linux-gnu
+ In trying to find a testcase for PR28827, I managed to hit a linker
+ error in bfd_set_section_contents with a .branch_lt input section
+ being too large for the output .branch_lt.
+
+ bfd/
+ PR 28827
+ * elf64-ppc.c (ppc64_elf_size_stubs): Set section size to
+ maxsize past STUB_SHRINK_ITER before laying out. Remove now
+ unnecessary conditional setting of maxsize at start of loop.
+ ld/
+ * testsuite/ld-powerpc/pr28827-2.d,
+ * testsuite/ld-powerpc/pr28827-2.lnk,
+ * testsuite/ld-powerpc/pr28827-2.s: New test.
+ * testsuite/ld-powerpc/powerpc.exp: Run it.
+
+2022-01-31 Tom Tromey <tom@tromey.com>
+
+ Remove unused variables in fbsd-tdep.c files
+ i386-fbsd-tdep.c and amd64-fbsd-tdep.c failed to build on my x86-64
+ Fedora 34 machine, using the system gcc, after a recent patch. These
+ two files now have unused variables, which provokes a warning in this
+ configuration.
+
+ I'm checking in this patch to remove the unused variables.
+
+2022-01-31 GDB Administrator <gdbadmin@sourceware.org>
+
+ Automatic date update in version.in
+
+2022-01-30 GDB Administrator <gdbadmin@sourceware.org>
+
+ Automatic date update in version.in
+
+2022-01-29 Alan Modra <amodra@gmail.com>
+
+ Re: PR28827, assertion building LLVM 9 on powerpc64le-linux-gnu
+ The previous patch wasn't quite correct. The size and padding depends
+ on offset used in the current iteration, and if we're fudging the
+ offset past STUB_SHRINK_ITER then we'd better use that offset. We
+ can't have plt_stub_pad using stub_sec->size as the offset.
+
+ PR 28827
+ * elf64-ppc.c (plt_stub_pad): Add stub_off param.
+ (ppc_size_one_stub): Set up stub_offset to value used in this
+ iteration before sizing the stub. Adjust plt_stub_pad calls.
+
+2022-01-29 Alan Modra <amodra@gmail.com>
+
+ objcopy --only-keep-debug
+ From: Peilin Ye <peilin.ye@bytedance.com>
+ objcopy's --only-keep-debug option has been broken for ELF files since
+ commit 8c803a2dd7d3.
+
+ 1. binutils/objcopy.c:setup_section() marks non-debug sections as
+ SHT_NOBITS, then calls bfd_copy_private_section_data();
+ 2. If ISEC and OSEC share the same section flags,
+ bfd/elf.c:_bfd_elf_init_private_section_data() restores OSEC's
+ section type back to ISEC's section type, effectively undoing
+ "make_nobits".
+
+ * objcopy.c (setup_section): Act on make_nobits after calling
+ bfd_copy_private_section_data.
+
+2022-01-29 GDB Administrator <gdbadmin@sourceware.org>
+
+ Automatic date update in version.in
+
+2022-01-28 John Baldwin <jhb@FreeBSD.org>
+
+ gdb: fix ppc-sysv-tdep.c build on 32-bit platforms
+ The previous code triggered the following error on an i386 host:
+
+ /git/gdb/gdb/ppc-sysv-tdep.c:1764:34: error: non-constant-expression cannot be narrowed from type 'ULONGEST' (aka 'unsigned long long') to 'size_t' (aka 'unsigned int') in initializer list [-Wc++11-narrowing]
+ unscaled.read ({writebuf, TYPE_LENGTH (valtype)},
+ ^~~~~~~~~~~~~~~~~~~~~
+ /git/gdb/gdb/gdbtypes.h:2043:31: note: expanded from macro 'TYPE_LENGTH'
+ ^~~~~~~~~~~~~~~~~~
+ /git/gdb/gdb/ppc-sysv-tdep.c:1764:34: note: insert an explicit cast to silence this issue
+ unscaled.read ({writebuf, TYPE_LENGTH (valtype)},
+ ^~~~~~~~~~~~~~~~~~~~~
+ static_cast<size_t>( )
+ /git/gdb/gdb/gdbtypes.h:2043:31: note: expanded from macro 'TYPE_LENGTH'
+ ^~~~~~~~~~~~~~~~~~
+ 1 error generated.
+
+ Fix this by using gdb::make_array_view.
+
+2022-01-28 John Baldwin <jhb@FreeBSD.org>
+
+ FreeBSD x86 nat: Use register maps for GP register sets.
+ Rather than using the x86-specific register offset tables, use
+ register maps to describe the layout of the general purpose registers
+ fetched via PT_GETREGS. The sole user-visible difference is that
+ FreeBSD/amd64 will now report additional segment registers ($ds, $es,
+ $fs, and $gs) for both 32-bit and 64-bit processes.
+
+ As part of these changes, the FreeBSD x86 native targets no longer use
+ amd64-bsd-nat.c or i386-bsd-nat.c. Remove FreeBSD-specific register
+ handling (for $fs_base, $gs_base, and XSAVE state) from these files.
+ Similarly, remove the global x86bsd_xsave_len from x86-bsd-nat.c. The
+ FreeBSD x86 native targets use a static xsave_len instead.
+
+ While here, rework the probing of PT_GETXMMREGS on FreeBSD/i386.
+ Probe the ptrace op once in the target read_description method and
+ cache the result for the future similar to the way the status of XSAVE
+ support is probed in the read_description method. In addition, return
+ the proper xcr0 mask (X87-only) for old kernels or systems without
+ either XSAVE or XMM support.
+
+2022-01-28 John Baldwin <jhb@FreeBSD.org>
+
+ fbsd-nat: Return a bool from fetch_register_set and store_register_set.
+ Change these helper functions to return true if they did any work.
+
+2022-01-28 John Baldwin <jhb@FreeBSD.org>
+
+ FreeBSD x86: Use tramp-frame for signal frames.
+ Use a register map to describe the registers in mcontext_t as part of
+ the signal frame as is done on several other FreeBSD arches. This
+ permits fetching the fsbase and gsbase register values from the signal
+ frame for both amd64 and i386 and permits fetching additional segment
+ registers stored as 16-bit values on amd64.
+
+ While signal frames on FreeBSD do contain floating point/XSAVE state,
+ these unwinders do not attempt to supply those registers. The
+ existing x86 signal frame uwinders do not support these registers, and
+ the only existing functions which handle FSAVE/FXSAVE/XSAVE state all
+ work with regcaches. In the future these unwinders could create a
+ tempory regcache, collect floating point registers, and then supply
+ values out of the regcache into the trad-frame.
+
+2022-01-28 John Baldwin <jhb@FreeBSD.org>
+
+ Use register maps for gp regsets on FreeBSD/x86 core dumps.
+ In particular, this permits reporting the value of the $ds, $es, $fs,
+ and $gs segment registers from amd64 core dumps since they are stored
+ as 16-bit values rather than the 32-bit size assumed by i386_gregset.
+
+2022-01-28 John Baldwin <jhb@FreeBSD.org>
+
+ regcache: Zero-extend small registers described by a register map.
+ When registers are supplied via regcache_supply_register from a
+ register block described by a register map, registers may be stored in
+ slots smaller than GDB's native register size (e.g. x86 segment
+ registers are 16 bits, but the GDB registers for those are 32-bits).
+ regcache_collect_regset is careful to zero-extend slots larger than a
+ register size, but regcache_supply_regset just used
+ regcache::raw_supply_part and did not initialize the upper bytes of a
+ register value.
+
+ trad_frame_set_reg_regmap assumes these semantics (zero-extending
+ short registers). Upcoming patches also require these semantics for
+ handling x86 segment register values stored in 16-bit slots on
+ FreeBSD. Note that architecturally x86 segment registers are 16 bits,
+ but the x86 gdb architectures treat these registers as 32 bits.
+
+2022-01-28 John Baldwin <jhb@FreeBSD.org>
+
+ FreeBSD x86: Remove fallback for detecting signal trampolines by address.
+ A few FreeBSD releases did not include the page holding the signal
+ code in core dumps. As a workaround, a sysctl was used to fetch the
+ default location of the signal code instead. The youngest affected
+ FreeBSD release is 10.1 released in November 2014 and EOLed in
+ December 2016. The fallback only works for native processes and would
+ require a separate unwinder once the FreeBSD arches are converted to
+ use tramp_frame for signal frames.
+
+ Remove support for pre-5.0 FreeBSD/i386 signal trampolines.
+ The last relevant release (FreeBSD 4.11) was released in January of
+ 2005.
+
+ Remove vestigal FreeBSD/i386 3.x support.
+ This was orphaned when a.out support was removed as the FreeBSD/i386
+ ELF support always used the register layouts from 4.0+.
+
+2022-01-28 Bruno Larsen <blarsen@redhat.com>
+
+ Add Bruno Larsen to gdb/MAINTAINERS
+
+2022-01-28 Enze Li <lienze2010@hotmail.com>
+
+ gdb/build: Fix Wpessimizing-move in clang build
+ When building with clang, I run into an error:
+
+ ...
+ tui/tui-disasm.c:138:25: error: moving a temporary object prevents copy
+ elision [-Werror,-Wpessimizing-move]
+ tal.addr_string = std::move (gdb_dis_out.release ());
+ ^
+ tui/tui-disasm.c:138:25: note: remove std::move call here
+ tal.addr_string = std::move (gdb_dis_out.release ());
+ ^~~~~~~~~~~ ~
+ ...
+
+ The error above is caused by the recent commit 5d10a2041eb8 ("gdb: add
+ string_file::release method").
+
+ Fix this by removing std::move.
+
+ Build on x86_64-linux with clang 13.0.0.
+
+2022-01-28 Simon Marchi <simon.marchi@polymtl.ca>
+
+ Add top-level .editorconfig file
+ Add a .editorconfig [1] file. This helps configure editors
+ automatically with the right whitespace settings. It will help me,
+ since I need to juggle with different whitespace settings for different
+ projects. But I think it can also help newcomers get things right from
+ the start.
+
+ Some editors have native support for reading these files, while others
+ require a plug-in [2]. And if you don't want to use it, then this file
+ doesn't change anything to your life.
+
+ I added rules for the kinds of files I edit most often, but more can be
+ added later. I assumed that the rules were the same for GDB and the
+ other projects, but if that's not the case, we can always put
+ .editorconfig files in project subdirectories to override settings.
+
+ [1] https://editorconfig.org/
+ [2] https://editorconfig.org/#download
+
+ Change-Id: Ifda136d13877fafcf0d137fec8501f6a34e1367b
+
+2022-01-28 Nick Clifton <nickc@redhat.com>
+
+ Updated French translation for the gas sub-directory.
+
+2022-01-28 Alan Modra <amodra@gmail.com>
+
+ Set __ehdr_start rel_from_abs earlier
+ This is just a tidy, making the __ehdr_start symbol flag tweaks all in
+ one place.
+
+ * ldelf.c (ldelf_before_allocation): Don't set rel_from_abs
+ for __ehdr_start.
+ * ldlang.c (lang_symbol_tweaks): Set it here instead.
+
+2022-01-28 Alan Modra <amodra@gmail.com>
+
+ PowerPC64 handling of @tocbase
+ * elf64-ppc.c (ppc64_elf_relocate_section): Warn if the symbol
+ on R_PPC64_TOC isn't local.
+
+2022-01-28 Alan Modra <amodra@gmail.com>
+
+ Update PowerPC64 symtocbase test
+ Using a symbol other than .TOC. with @tocbase is an extension to the
+ ABI. It is never valid to use a symbol without a definition in the
+ binary, and symbols on these expressions cannot be overridden. Make
+ this explicit by using ".hidden" in the testcase.
+
+ * testsuite/ld-powerpc/symtocbase-1.s: Align data. Make function
+ entry symbol hidden.
+ * testsuite/ld-powerpc/symtocbase-2.s: Likewise.
+ * testsuite/ld-powerpc/symtocbase.d: Adjust expected output.
+
+2022-01-28 Alan Modra <amodra@gmail.com>
+
+ PR28827, assertion building LLVM 9 on powerpc64le-linux-gnu
+ The assertion is this one in ppc_build_one_stub
+ BFD_ASSERT (stub_entry->stub_offset >= stub_entry->group->stub_sec->size);
+ It is checking that a stub doesn't overwrite the tail of a previous
+ stub, so not something trivial.
+
+ Normally, stub sizing iterates until no stubs are added, detected by
+ no change in stub section size. Iteration also continues if no stubs
+ are added but one or more stubs increases in size, which also can be
+ detected by a change in stub section size. But there is a
+ pathological case where stub section sizing decreases one iteration
+ then increases the next. To handle that situation, stub sizing also
+ stops at more than STUB_SHRINK_ITER (20) iterations when calculated
+ stub section size is smaller. The previous larger size is kept for
+ the actual layout (so that building the stubs, which behaves like
+ another iteration of stub sizing, will see the stub section sizes
+ shrink). The problem with that stopping condition is that it assumes
+ that stub sizing is only affected by addresses external to the stub
+ sections, which isn't always true.
+
+ This patch fixes that by also keeping larger individual stub_offset
+ addresses past STUB_SHRINK_ITER. It also catches a further
+ pathological case where one stub shrinks and another expands in such a
+ way that no stub section size change is seen.
+
+ PR 28827
+ * elf64-ppc.c (struct ppc_link_hash_table): Add stub_changed.
+ (STUB_SHRINK_ITER): Move earlier in file.
+ (ppc_size_one_stub): Detect any change in stub_offset. Keep
+ larger one if past STUB_SHRINK_ITER.
+ (ppc64_elf_size_stubs): Iterate on stub_changed too.
+
+2022-01-28 Alan Modra <amodra@gmail.com>
+
+ PR28826 x86_64 ld segfaults building xen
+ Fallout from commit e86fc4a5bc37
+
+ PR 28826
+ * coffgen.c (coff_write_alien_symbol): Init dummy to zeros.
+
+2022-01-28 Alan Modra <amodra@gmail.com>
+
+ PR28753, buffer overflow in read_section_stabs_debugging_info
+ PR 28753
+ * rddbg.c (read_section_stabs_debugging_info): Don't read past
+ end of section when concatentating stab strings.
+
+2022-01-28 GDB Administrator <gdbadmin@sourceware.org>
+
+ Automatic date update in version.in
+
+2022-01-27 Simon Marchi <simon.marchi@polymtl.ca>
+
+ gdb: work around negative DW_AT_data_member_location GCC 11 bug
+ g++ 11.1.0 has a bug where it will emit a negative
+ DW_AT_data_member_location in some cases:
+
+ $ cat test.cpp
+ #include <memory>
+
+ int
+ main()
+ {
+ std::unique_ptr<int> ptr;
+ }
+ $ g++ -g test.cpp
+ $ llvm-dwarfdump -F a.out
+ ...
+ 0x00000964: DW_TAG_member
+ DW_AT_name [DW_FORM_strp] ("_M_head_impl")
+ DW_AT_decl_file [DW_FORM_data1] ("/usr/include/c++/11.1.0/tuple")
+ DW_AT_decl_line [DW_FORM_data1] (125)
+ DW_AT_decl_column [DW_FORM_data1] (0x27)
+ DW_AT_type [DW_FORM_ref4] (0x0000067a "default_delete<int>")
+ DW_AT_data_member_location [DW_FORM_sdata] (-1)
+ ...
+
+ This leads to a GDB crash (when built with ASan, otherwise probably
+ garbage results), since it tries to read just before (to the left, in
+ ASan speak) of the value's buffer:
+
+ ==888645==ERROR: AddressSanitizer: heap-buffer-overflow on address 0x6020000c52af at pc 0x7f711b239f4b bp 0x7fff356bd470 sp 0x7fff356bcc18
+ READ of size 1 at 0x6020000c52af thread T0
+ #0 0x7f711b239f4a in __interceptor_memcpy /build/gcc/src/gcc/libsanitizer/sanitizer_common/sanitizer_common_interceptors.inc:827
+ #1 0x555c4977efa1 in value_contents_copy_raw /home/simark/src/binutils-gdb/gdb/value.c:1347
+ #2 0x555c497909cd in value_primitive_field(value*, long, int, type*) /home/simark/src/binutils-gdb/gdb/value.c:3126
+ #3 0x555c478f2eaa in cp_print_value_fields(value*, ui_file*, int, value_print_options const*, type**, int) /home/simark/src/binutils-gdb/gdb/cp-valprint.c:333
+ #4 0x555c478f63b2 in cp_print_value /home/simark/src/binutils-gdb/gdb/cp-valprint.c:513
+ #5 0x555c478f02ca in cp_print_value_fields(value*, ui_file*, int, value_print_options const*, type**, int) /home/simark/src/binutils-gdb/gdb/cp-valprint.c:161
+ #6 0x555c478f63b2 in cp_print_value /home/simark/src/binutils-gdb/gdb/cp-valprint.c:513
+ #7 0x555c478f02ca in cp_print_value_fields(value*, ui_file*, int, value_print_options const*, type**, int) /home/simark/src/binutils-gdb/gdb/cp-valprint.c:161
+ #8 0x555c478f63b2 in cp_print_value /home/simark/src/binutils-gdb/gdb/cp-valprint.c:513
+ #9 0x555c478f02ca in cp_print_value_fields(value*, ui_file*, int, value_print_options const*, type**, int) /home/simark/src/binutils-gdb/gdb/cp-valprint.c:161
+ #10 0x555c4760d45f in c_value_print_struct /home/simark/src/binutils-gdb/gdb/c-valprint.c:383
+ #11 0x555c4760df4c in c_value_print_inner(value*, ui_file*, int, value_print_options const*) /home/simark/src/binutils-gdb/gdb/c-valprint.c:438
+ #12 0x555c483ff9a7 in language_defn::value_print_inner(value*, ui_file*, int, value_print_options const*) const /home/simark/src/binutils-gdb/gdb/language.c:632
+ #13 0x555c49758b68 in do_val_print /home/simark/src/binutils-gdb/gdb/valprint.c:1048
+ #14 0x555c49759b17 in common_val_print(value*, ui_file*, int, value_print_options const*, language_defn const*) /home/simark/src/binutils-gdb/gdb/valprint.c:1151
+ #15 0x555c478f2fcb in cp_print_value_fields(value*, ui_file*, int, value_print_options const*, type**, int) /home/simark/src/binutils-gdb/gdb/cp-valprint.c:335
+ #16 0x555c478f63b2 in cp_print_value /home/simark/src/binutils-gdb/gdb/cp-valprint.c:513
+ #17 0x555c478f02ca in cp_print_value_fields(value*, ui_file*, int, value_print_options const*, type**, int) /home/simark/src/binutils-gdb/gdb/cp-valprint.c:161
+ #18 0x555c4760d45f in c_value_print_struct /home/simark/src/binutils-gdb/gdb/c-valprint.c:383
+ #19 0x555c4760df4c in c_value_print_inner(value*, ui_file*, int, value_print_options const*) /home/simark/src/binutils-gdb/gdb/c-valprint.c:438
+ #20 0x555c483ff9a7 in language_defn::value_print_inner(value*, ui_file*, int, value_print_options const*) const /home/simark/src/binutils-gdb/gdb/language.c:632
+ #21 0x555c49758b68 in do_val_print /home/simark/src/binutils-gdb/gdb/valprint.c:1048
+ #22 0x555c49759b17 in common_val_print(value*, ui_file*, int, value_print_options const*, language_defn const*) /home/simark/src/binutils-gdb/gdb/valprint.c:1151
+ #23 0x555c478f2fcb in cp_print_value_fields(value*, ui_file*, int, value_print_options const*, type**, int) /home/simark/src/binutils-gdb/gdb/cp-valprint.c:335
+ #24 0x555c4760d45f in c_value_print_struct /home/simark/src/binutils-gdb/gdb/c-valprint.c:383
+ #25 0x555c4760df4c in c_value_print_inner(value*, ui_file*, int, value_print_options const*) /home/simark/src/binutils-gdb/gdb/c-valprint.c:438
+ #26 0x555c483ff9a7 in language_defn::value_print_inner(value*, ui_file*, int, value_print_options const*) const /home/simark/src/binutils-gdb/gdb/language.c:632
+ #27 0x555c49758b68 in do_val_print /home/simark/src/binutils-gdb/gdb/valprint.c:1048
+ #28 0x555c49759b17 in common_val_print(value*, ui_file*, int, value_print_options const*, language_defn const*) /home/simark/src/binutils-gdb/gdb/valprint.c:1151
+ #29 0x555c4760f04c in c_value_print(value*, ui_file*, value_print_options const*) /home/simark/src/binutils-gdb/gdb/c-valprint.c:587
+ #30 0x555c483ff954 in language_defn::value_print(value*, ui_file*, value_print_options const*) const /home/simark/src/binutils-gdb/gdb/language.c:614
+ #31 0x555c49759f61 in value_print(value*, ui_file*, value_print_options const*) /home/simark/src/binutils-gdb/gdb/valprint.c:1189
+ #32 0x555c48950f70 in print_formatted /home/simark/src/binutils-gdb/gdb/printcmd.c:337
+ #33 0x555c48958eda in print_value(value*, value_print_options const&) /home/simark/src/binutils-gdb/gdb/printcmd.c:1258
+ #34 0x555c48959891 in print_command_1 /home/simark/src/binutils-gdb/gdb/printcmd.c:1367
+ #35 0x555c4895a3df in print_command /home/simark/src/binutils-gdb/gdb/printcmd.c:1458
+ #36 0x555c4767f974 in do_simple_func /home/simark/src/binutils-gdb/gdb/cli/cli-decode.c:97
+ #37 0x555c47692e25 in cmd_func(cmd_list_element*, char const*, int) /home/simark/src/binutils-gdb/gdb/cli/cli-decode.c:2475
+ #38 0x555c4936107e in execute_command(char const*, int) /home/simark/src/binutils-gdb/gdb/top.c:670
+ #39 0x555c485f1bff in catch_command_errors /home/simark/src/binutils-gdb/gdb/main.c:523
+ #40 0x555c485f249c in execute_cmdargs /home/simark/src/binutils-gdb/gdb/main.c:618
+ #41 0x555c485f6677 in captured_main_1 /home/simark/src/binutils-gdb/gdb/main.c:1317
+ #42 0x555c485f6c83 in captured_main /home/simark/src/binutils-gdb/gdb/main.c:1338
+ #43 0x555c485f6d65 in gdb_main(captured_main_args*) /home/simark/src/binutils-gdb/gdb/main.c:1363
+ #44 0x555c46e41ba8 in main /home/simark/src/binutils-gdb/gdb/gdb.c:32
+ #45 0x7f71198bcb24 in __libc_start_main (/usr/lib/libc.so.6+0x27b24)
+ #46 0x555c46e4197d in _start (/home/simark/build/binutils-gdb-one-target/gdb/gdb+0x77f197d)
+
+ 0x6020000c52af is located 1 bytes to the left of 8-byte region [0x6020000c52b0,0x6020000c52b8)
+ allocated by thread T0 here:
+ #0 0x7f711b2b7459 in __interceptor_calloc /build/gcc/src/gcc/libsanitizer/asan/asan_malloc_linux.cpp:154
+ #1 0x555c470acdc9 in xcalloc /home/simark/src/binutils-gdb/gdb/alloc.c:100
+ #2 0x555c49b775cd in xzalloc(unsigned long) /home/simark/src/binutils-gdb/gdbsupport/common-utils.cc:29
+ #3 0x555c4977bdeb in allocate_value_contents /home/simark/src/binutils-gdb/gdb/value.c:1029
+ #4 0x555c4977be25 in allocate_value(type*) /home/simark/src/binutils-gdb/gdb/value.c:1040
+ #5 0x555c4979030d in value_primitive_field(value*, long, int, type*) /home/simark/src/binutils-gdb/gdb/value.c:3092
+ #6 0x555c478f6280 in cp_print_value /home/simark/src/binutils-gdb/gdb/cp-valprint.c:501
+ #7 0x555c478f02ca in cp_print_value_fields(value*, ui_file*, int, value_print_options const*, type**, int) /home/simark/src/binutils-gdb/gdb/cp-valprint.c:161
+ #8 0x555c478f63b2 in cp_print_value /home/simark/src/binutils-gdb/gdb/cp-valprint.c:513
+ #9 0x555c478f02ca in cp_print_value_fields(value*, ui_file*, int, value_print_options const*, type**, int) /home/simark/src/binutils-gdb/gdb/cp-valprint.c:161
+ #10 0x555c478f63b2 in cp_print_value /home/simark/src/binutils-gdb/gdb/cp-valprint.c:513
+ #11 0x555c478f02ca in cp_print_value_fields(value*, ui_file*, int, value_print_options const*, type**, int) /home/simark/src/binutils-gdb/gdb/cp-valprint.c:161
+ #12 0x555c4760d45f in c_value_print_struct /home/simark/src/binutils-gdb/gdb/c-valprint.c:383
+ #13 0x555c4760df4c in c_value_print_inner(value*, ui_file*, int, value_print_options const*) /home/simark/src/binutils-gdb/gdb/c-valprint.c:438
+ #14 0x555c483ff9a7 in language_defn::value_print_inner(value*, ui_file*, int, value_print_options const*) const /home/simark/src/binutils-gdb/gdb/language.c:632
+ #15 0x555c49758b68 in do_val_print /home/simark/src/binutils-gdb/gdb/valprint.c:1048
+ #16 0x555c49759b17 in common_val_print(value*, ui_file*, int, value_print_options const*, language_defn const*) /home/simark/src/binutils-gdb/gdb/valprint.c:1151
+ #17 0x555c478f2fcb in cp_print_value_fields(value*, ui_file*, int, value_print_options const*, type**, int) /home/simark/src/binutils-gdb/gdb/cp-valprint.c:335
+ #18 0x555c478f63b2 in cp_print_value /home/simark/src/binutils-gdb/gdb/cp-valprint.c:513
+ #19 0x555c478f02ca in cp_print_value_fields(value*, ui_file*, int, value_print_options const*, type**, int) /home/simark/src/binutils-gdb/gdb/cp-valprint.c:161
+ #20 0x555c4760d45f in c_value_print_struct /home/simark/src/binutils-gdb/gdb/c-valprint.c:383
+ #21 0x555c4760df4c in c_value_print_inner(value*, ui_file*, int, value_print_options const*) /home/simark/src/binutils-gdb/gdb/c-valprint.c:438
+ #22 0x555c483ff9a7 in language_defn::value_print_inner(value*, ui_file*, int, value_print_options const*) const /home/simark/src/binutils-gdb/gdb/language.c:632
+ #23 0x555c49758b68 in do_val_print /home/simark/src/binutils-gdb/gdb/valprint.c:1048
+ #24 0x555c49759b17 in common_val_print(value*, ui_file*, int, value_print_options const*, language_defn const*) /home/simark/src/binutils-gdb/gdb/valprint.c:1151
+ #25 0x555c478f2fcb in cp_print_value_fields(value*, ui_file*, int, value_print_options const*, type**, int) /home/simark/src/binutils-gdb/gdb/cp-valprint.c:335
+ #26 0x555c4760d45f in c_value_print_struct /home/simark/src/binutils-gdb/gdb/c-valprint.c:383
+ #27 0x555c4760df4c in c_value_print_inner(value*, ui_file*, int, value_print_options const*) /home/simark/src/binutils-gdb/gdb/c-valprint.c:438
+ #28 0x555c483ff9a7 in language_defn::value_print_inner(value*, ui_file*, int, value_print_options const*) const /home/simark/src/binutils-gdb/gdb/language.c:632
+ #29 0x555c49758b68 in do_val_print /home/simark/src/binutils-gdb/gdb/valprint.c:1048
+
+ Since there are some binaries with this in the wild, I think it would be
+ useful for GDB to work around this. I did the obvious simple thing, if
+ the DW_AT_data_member_location's value is -1, replace it with 0. I
+ added a producer check to only apply this fixup for GCC 11. The idea is
+ that if some other compiler ever uses a DW_AT_data_member_location value
+ of -1 by mistake, we don't know (before analyzing the bug at least) if
+ they did mean 0 or some other value. So I wouldn't want to apply the
+ fixup in that case.
+
+ Bug: https://sourceware.org/bugzilla/show_bug.cgi?id=28063
+ Change-Id: Ieef3459b0b9bbce8bdad838ba83b4b64e7269d42
+
+2022-01-27 Kevin Buettner <kevinb@redhat.com>
+
+ Fix GDB internal error by using text (instead of data) section offset
+ Fedora Rawhide is now using gcc-12.0. As part of updating to the
+ gcc-12.0 package set, Rawhide is also now using a version of libgcc_s
+ which lacks a .data section. This causes gdb to fail in the following
+ fashion while debugging a program (such as gdb) which uses libgcc_s:
+
+ (top-gdb) run
+ Starting program: rawhide-master/bld/gdb/gdb
+ ...
+ objfiles.h:467: internal-error: sect_index_data not initialized
+ A problem internal to GDB has been detected,
+ further debugging may prove unreliable.
+ ...
+
+ I snipped the backtrace from the above output. Instead, here's a
+ portion of a backtrace obtained using GDB's backtrace command.
+ (Obviously, in order to obtain it, I used a GDB which has been patched
+ with this commit.)
+
+ #0 internal_error (
+ file=0xc6a508 "gdb/objfiles.h", line=467,
+ fmt=0xc6a4e8 "sect_index_data not initialized")
+ at gdbsupport/errors.cc:51
+ #1 0x00000000005f9651 in objfile::data_section_offset (this=0x4fa48f0)
+ at gdb/objfiles.h:467
+ #2 0x000000000097c5f8 in relocate_address (address=0x17244, objfile=0x4fa48f0)
+ at gdb/stap-probe.c:1333
+ #3 0x000000000097c630 in stap_probe::get_relocated_address (this=0xa1a17a0,
+ objfile=0x4fa48f0)
+ at gdb/stap-probe.c:1341
+ #4 0x00000000004d7025 in create_exception_master_breakpoint_probe (
+ objfile=0x4fa48f0)
+ at gdb/breakpoint.c:3505
+ #5 0x00000000004d7426 in create_exception_master_breakpoint ()
+ at gdb/breakpoint.c:3575
+ #6 0x00000000004efcc1 in breakpoint_re_set ()
+ at gdb/breakpoint.c:13407
+ #7 0x0000000000956998 in solib_add (pattern=0x0, from_tty=0, readsyms=1)
+ at gdb/solib.c:1001
+ #8 0x00000000009576a8 in handle_solib_event ()
+ at gdb/solib.c:1269
+ ...
+
+ The function 'relocate_address' in gdb/stap-probe.c attempts to do
+ its "relocation" by using objfile->data_section_offset(). That
+ method, data_section_offset() is defined as follows in objfiles.h:
+
+ CORE_ADDR data_section_offset () const
+ {
+ return section_offsets[SECT_OFF_DATA (this)];
+ }
+
+ The internal error occurs when the SECT_OFF_DATA macro finds that the
+ 'sect_index_data' field is -1:
+
+ #define SECT_OFF_DATA(objfile) \
+ ((objfile->sect_index_data == -1) \
+ ? (internal_error (__FILE__, __LINE__, \
+ _("sect_index_data not initialized")), -1) \
+ : objfile->sect_index_data)
+
+ relocate_address() is obtaining the section offset in order to compute
+ a relocated address. For some ABIs, such as the System V ABI, the
+ section offsets will all be the same. So for those ABIs, it doesn't
+ matter which offset is used. However, other ABIs, such as the FDPIC
+ ABI, will have different offsets for the various sections. Thus, for
+ those ABIs, it is vital that this and other relocation code use the
+ correct offset.
+
+ In stap_probe::get_relocated_address, the address to which to add the
+ offset (thus forming the relocated address) is obtained via
+ this->get_address (); get_address is a getter for m_address in
+ probe.h. It's documented/defined as follows (also in probe.h):
+
+ /* The address where the probe is inserted, relative to
+ SECT_OFF_TEXT. */
+ CORE_ADDR m_address;
+
+ (Thanks to Tom Tromey for this observation.)
+
+ So, based on this, the current use of data_section_offset /
+ SECT_OFF_DATA is wrong. This relocation code should have been using
+ text_section_offset / SECT_OFF_TEXT all along. That being the
+ case, I've adjusted the stap-probe.c relocation code accordingly.
+
+ Searching the sources turned up one other use of data_section_offset,
+ in gdb/dtrace-probe.c, so I've updated that code as well. The same
+ reasoning presented above applies to this case too.
+
+ Summary:
+
+ * gdb/dtrace-probe.c (dtrace_probe::get_relocated_address):
+ Use method text_section_offset instead of data_section_offset.
+ * gdb/stap-probe.c (relocate_address): Likewise.
+
+2022-01-27 Markus Metzger <markus.t.metzger@intel.com>
+
+ gdb, remote, btrace: move switch_to_thread call right before xfer call
+ In remote_target::remote_btrace_maybe_reopen, we switch to the currently
+ iterated thread in order to set inferior_ptid for a subsequent xfer.
+
+ Move the switch_to_thread call directly before the target_read_stralloc
+ call to clarify why we need to switch threads.
+
+2022-01-27 Markus Metzger <markus.t.metzger@intel.com>
+
+ gdb, gdbserver: update thread identifier in enable_btrace target method
+ The enable_btrace target method takes a ptid_t to identify the thread on
+ which tracing shall be enabled.
+
+ Change this to thread_info * to avoid translating back and forth between
+ the two. This will be used in a subsequent patch.
+
+2022-01-27 Markus Metzger <markus.t.metzger@intel.com>
+
+ gdb, btrace: switch threads in remote_btrace_maybe_reopen()
+ In remote_btrace_maybe_reopen() we iterate over threads and use
+ set_general_thread() to set the thread from which to transfer the btrace
+ configuration.
+
+ This sets the remote general thread but does not affect inferior_ptid. On
+ the xfer request later on, remote_target::xfer_partial() again sets the
+ remote general thread to inferior_ptid, overwriting what
+ remote_btrace_maybe_reopen() had done.
+
+ In one case, this led to inferior_ptid being null_ptid when we tried to
+ enable tracing on a newly created thread inside a newly created process
+ during attach.
+
+ This, in turn, led to find_inferior_pid() asserting when we iterated over
+ threads in record_btrace_is_replaying(), which was called from
+ record_btrace_target::xfer_partial() when reading the btrace configuration
+ of the new thread to check whether it was already being recorded.
+
+ The bug was exposed by
+
+ 0618ae41497 gdb: optimize all_matching_threads_iterator
+
+ and found by
+
+ FAIL: gdb.btrace/enable-new-thread.exp: ... (GDB internal error)
+
+ Use switch_to_thread() in remote_btrace_maybe_reopen().
+
+2022-01-27 Markus Metzger <markus.t.metzger@intel.com>
+
+ gdb, btrace: rename record_btrace_enable_warn()
+ We use record_btrace_enable_warn() as the new-thread observer callback.
+ It is not used in other contexts.
+
+ Rename it to record_btrace_on_new_thread() to make its role more clear.
+
+2022-01-27 Nick Clifton <nickc@redhat.com>
+
+ Updated Swedish translation for the binutils subdirectory
+
+2022-01-27 GDB Administrator <gdbadmin@sourceware.org>
+
+ Automatic date update in version.in
+
+2022-01-26 Andrew Burgess <aburgess@redhat.com>
+
+ gdb/python: handle non utf-8 characters when source highlighting
+ This commit adds support for source files that contain non utf-8
+ characters when performing source styling using the Python pygments
+ package. This does not change the behaviour of GDB when the GNU
+ Source Highlight library is used.
+
+ For the following problem description, assume that either GDB is built
+ without GNU Source Highlight support, of that this has been disabled
+ using 'maintenance set gnu-source-highlight enabled off'.
+
+ The initial problem reported was that a source file containing non
+ utf-8 characters would cause GDB to print a Python exception, and then
+ display the source without styling, e.g.:
+
+ Python Exception <class 'UnicodeDecodeError'>: 'utf-8' codec can't decode byte 0xc0 in position 142: invalid start byte
+ /* Source code here, without styling... */
+
+ Further, as the user steps through different source files, each time
+ the problematic source file was evicted from the source cache, and
+ then later reloaded, the exception would be printed again.
+
+ Finally, this problem is only present when using Python 3, this issue
+ is not present for Python 2.
+
+ What makes this especially frustrating is that GDB can clearly print
+ the source file contents, they're right there... If we disable
+ styling completely, or make use of the GNU Source Highlight library,
+ then everything is fine. So why is there an error when we try to
+ apply styling using Python?
+
+ The problem is the use of PyString_FromString (which is an alias for
+ PyUnicode_FromString in Python 3), this function converts a C string
+ into a either a Unicode object (Py3) or a str object (Py2). For
+ Python 2 there is no unicode encoding performed during this function
+ call, but for Python 3 the input is assumed to be a uft-8 encoding
+ string for the purpose of the conversion. And here of course, is the
+ problem, if the source file contains non utf-8 characters, then it
+ should not be treated as utf-8, but that's what we do, and that's why
+ we get an error.
+
+ My first thought when looking at this was to spot when the
+ PyString_FromString call failed with a UnicodeDecodeError and silently
+ ignore the error. This would mean that GDB would print the source
+ without styling, but would also avoid the annoying exception message.
+
+ However, I also make use of `pygmentize`, a command line wrapper
+ around the Python pygments module, which I use to apply syntax
+ highlighting in the output of `less`. And this command line wrapper
+ is quite happy to syntax highlight my source file that contains non
+ utf-8 characters, so it feels like the problem should be solvable.
+
+ It turns out that inside the pygments module there is already support
+ for guessing the encoding of the incoming file content, if the
+ incoming content is not already a Unicode string. This is what
+ happens for Python 2 where the incoming content is of `str` type.
+
+ We could try and make GDB smarter when it comes to converting C
+ strings into Python Unicode objects; this would probably require us to
+ just try a couple of different encoding schemes rather than just
+ giving up after utf-8.
+
+ However, I figure, why bother? The pygments module already does this
+ for us, and the colorize API is not part of the documented external
+ API of GDB. So, why not just change the colorize API, instead of the
+ content being a Unicode string (for Python 3), lets just make the
+ content be a bytes object. The pygments module can then take
+ responsibility for guessing the encoding.
+
+ So, currently, the colorize API receives a unicode object, and returns
+ a unicode object. I propose that the colorize API receive a bytes
+ object, and return a bytes object.
+
+2022-01-26 Tom Tromey <tom@tromey.com>
+
+ Remove global wrap_here function
+ This removes the global wrap_here function, so that future calls
+ cannot be introduced. Instead, all callers must use the method on the
+ appropriate ui_file.
+
+ This temporarily moves the implementation of this method to utils.c.
+ This will change once the remaining patches to untangle the pager have
+ been written.
+
+2022-01-26 Tom Tromey <tom@tromey.com>
+
+ Always call the wrap_here method
+ This changes all existing calls to wrap_here to call the method on the
+ appropriate ui_file instead. The choice of ui_file is determined by
+ context.
+
+2022-01-26 Tom Tromey <tom@tromey.com>
+
+ Add ui_file::wrap_here
+ Right now, wrap_here is a global function. In the long run, we'd like
+ output streams to be relatively self-contained objects, and having a
+ global function like this is counter to that goal. Also, existing
+ code freely mixes writes to some parameterized stream with calls to
+ wrap_here -- but wrap_here only really affects gdb_stdout, so this is
+ also incoherent.
+
+ This step is a patch toward making wrap_here more sane. It adds a
+ wrap_here method to ui_file and changes ui_out implementations to use
+ it.
+
+2022-01-26 Tom Tromey <tom@tromey.com>
+
+ Convert wrap_here to use integer parameter
+ I think it only really makes sense to call wrap_here with an argument
+ consisting solely of spaces. Given this, it seemed better to me that
+ the argument be an int, rather than a string. This patch is the
+ result. Much of it was written by a script.
+
+2022-01-26 Andrew Burgess <aburgess@redhat.com>
+
+ gdb/python: improve the auto help text for gdb.Parameter
+ This commit attempts to improve the help text that is generated for
+ gdb.Parameter objects when the user fails to provide their own
+ documentation.
+
+ Documentation for a gdb.Parameter is currently pulled from two
+ sources: the class documentation string, and the set_doc/show_doc
+ class attributes. Thus, a fully documented parameter might look like
+ this:
+
+ class Param_All (gdb.Parameter):
+ """This is the class documentation string."""
+
+ show_doc = "Show the state of this parameter"
+ set_doc = "Set the state of this parameter"
+
+ def get_set_string (self):
+ val = "on"
+ if (self.value == False):
+ val = "off"
+ return "Test Parameter has been set to " + val
+
+ def __init__ (self, name):
+ super (Param_All, self).__init__ (name, gdb.COMMAND_DATA, gdb.PARAM_BOOLEAN)
+ self._value = True
+
+ Param_All ('param-all')
+
+ Then in GDB we see this:
+
+ (gdb) help set param-all
+ Set the state of this parameter
+ This is the class documentation string.
+
+ Which is fine. But, if the user skips both of the documentation parts
+ like this:
+
+ class Param_None (gdb.Parameter):
+
+ def get_set_string (self):
+ val = "on"
+ if (self.value == False):
+ val = "off"
+ return "Test Parameter has been set to " + val
+
+ def __init__ (self, name):
+ super (Param_None, self).__init__ (name, gdb.COMMAND_DATA, gdb.PARAM_BOOLEAN)
+ self._value = True
+
+ Param_None ('param-none')
+
+ Now in GDB we see this:
+
+ (gdb) help set param-none
+ This command is not documented.
+ This command is not documented.
+
+ That's not great, the duplicated text looks a bit weird. If we drop
+ different parts we get different results. Here's what we get if the
+ user drops the set_doc and show_doc attributes:
+
+ (gdb) help set param-doc
+ This command is not documented.
+ This is the class documentation string.
+
+ That kind of sucks, we say it's undocumented, then proceed to print
+ the documentation. Finally, if we drop the class documentation but
+ keep the set_doc and show_doc:
+
+ (gdb) help set param-set-show
+ Set the state of this parameter
+ This command is not documented.
+
+ That seems OK.
+
+ So, I think there's room for improvement.
+
+ With this patch, for the four cases above we now see this:
+
+ # All values provided by the user, no change in this case:
+ (gdb) help set param-all
+ Set the state of this parameter
+ This is the class documentation string.
+
+ # Nothing provided by the user, the first string is now different:
+ (gdb) help set param-none
+ Set the current value of 'param-none'.
+ This command is not documented.
+
+ # Only the class documentation is provided, the first string is
+ # changed as in the previous case:
+ (gdb) help set param-doc
+ Set the current value of 'param-doc'.
+ This is the class documentation string.
+
+ # Only the set_doc and show_doc are provided, this case is unchanged
+ # from before the patch:
+ (gdb) help set param-set-show
+ Set the state of this parameter
+ This command is not documented.
+
+ The one place where this change might be considered a negative is when
+ dealing with prefix commands. If we create a prefix command but don't
+ supply the set_doc / show_doc strings, then this is what we saw before
+ my patch:
+
+ (gdb) python Param_None ('print param-none')
+ (gdb) help set print
+ set print, set pr, set p
+ Generic command for setting how things print.
+
+ List of set print subcommands:
+
+ ... snip ...
+ set print param-none -- This command is not documented.
+ ... snip ...
+
+ And after my patch:
+
+ (gdb) python Param_None ('print param-none')
+ (gdb) help set print
+ set print, set pr, set p
+ Generic command for setting how things print.
+
+ List of set print subcommands:
+
+ ... snip ...
+ set print param-none -- Set the current value of 'print param-none'.
+ ... snip ...
+
+ This seems slightly less helpful than before, but I don't think its
+ terrible.
+
+ Additionally, I've changed what we print when the get_show_string
+ method is not provided in Python.
+
+ Back when gdb.Parameter was first added to GDB, we didn't provide a
+ show function when registering the internal command object within
+ GDB. As a result, GDB would make use of its "magic" mangling of the
+ show_doc string to create a sentence that would display the current
+ value (see deprecated_show_value_hack in cli/cli-setshow.c).
+
+ However, when we added support for the get_show_string method to
+ gdb.Parameter, there was an attempt to maintain backward compatibility
+ by displaying the show_doc string with the current value appended, see
+ get_show_value in py-param.c. Unfortunately, this isn't anywhere
+ close to what deprecated_show_value_hack does, and the results are
+ pretty poor, for example, this is GDB before my patch:
+
+ (gdb) show param-none
+ This command is not documented. off
+
+ I think we can all agree that this is pretty bad.
+
+ After my patch, we how show this:
+
+ (gdb) show param-none
+ The current value of 'param-none' is "off".
+
+ Which at least is a real sentence, even if it's not very informative.
+
+ This patch does change the way that the Python API behaves slightly,
+ but only in the cases when the user has missed providing GDB with some
+ information. In most cases I think the new behaviour is a lot better,
+ there's the one case (noted above) which is a bit iffy, but I think is
+ still OK.
+
+ I've updated the existing gdb.python/py-parameter.exp test to cover
+ the modified behaviour.
+
+ Finally, I've updated the documentation to (I hope) make it clearer
+ how the various bits of help text come together.
+
+2022-01-26 Andrew Burgess <aburgess@redhat.com>
+
+ gdb/python: add gdb.history_count function
+ Add a new function gdb.history_count to the Python api, this function
+ returns an integer, the number of items in GDB's value history.
+
+ This is useful if you want to pull items from the history by their
+ absolute number, for example, if you wanted to show a complete history
+ list. Previously we could figure out how many items are in the
+ history list by trying to fetch the items, and then catching the
+ exception when the item is not available, but having this function
+ seems nicer.
+
+2022-01-26 Tom Tromey <tromey@adacore.com>
+
+ Remove unused declaration
+ This removes an unused declaration from top.h. This type is not
+ defined anywhere.
+
+2022-01-26 Simon Marchi <simon.marchi@efficios.com>
+
+ gdb: convert maintenance target-async and target-non-stop settings to callbacks
+ This simplifies things a bit, as we don't need two variables and think
+ about reverting target_async_permitted_1 and target_non_stop_enabled_1
+ values if we can't change the setting.
+
+ Change-Id: I36acab045dacf02ae1988486cfdb27c1dff309f6
+
+2022-01-26 Keith Seitz <keiths@redhat.com>
+
+ Reference array of structs instead of first member during memcpy
+ aarch64-tdep.c defines the following macro:
+
+ #define MEM_ALLOC(MEMS, LENGTH, RECORD_BUF) \
+ do \
+ { \
+ unsigned int mem_len = LENGTH; \
+ if (mem_len) \
+ { \
+ MEMS = XNEWVEC (struct aarch64_mem_r, mem_len); \
+ memcpy(&MEMS->len, &RECORD_BUF[0], \
+ sizeof(struct aarch64_mem_r) * LENGTH); \
+ } \
+ } \
+ while (0)
+
+ This is simlpy allocating a new array and copying it. However, for
+ the destination address, it is actually copying into the first member
+ of the first element of the array (`&MEMS->len"). This elicits a
+ warning with GCC 12:
+
+ ../../binutils-gdb/gdb/aarch64-tdep.c: In function ‘int aarch64_process_record(gdbarch*, regcache*, CORE_ADDR)’:
+ ../../binutils-gdb/gdb/aarch64-tdep.c:3711:23: error: writing 16 bytes into a region of size 8 [-Werror=stringop-overflow=]
+ 3711 | memcpy(&MEMS->len, &RECORD_BUF[0], \
+ | ^
+ ../../binutils-gdb/gdb/aarch64-tdep.c:4394:3: note: in expansion of macro ‘MEM_ALLOC’
+ 4394 | MEM_ALLOC (aarch64_insn_r->aarch64_mems, aarch64_insn_r->mem_rec_count,
+ | ^~~~~~~~~
+ ../../binutils-gdb/gdb/aarch64-tdep.c:3721:12: note: destination object ‘aarch64_mem_r::len’ of size 8
+ 3721 | uint64_t len; /* Record length. */
+ | ^~~
+
+ The simple fix is to reference the array, `MEMS' as the destination of the copy.
+
+ Tested by rebuilding.
+
+
+ # Please enter the commit message for your changes. Lines starting
+ # with '#' will be kept; you may remove them yourself if you want to.
+ # An empty message aborts the commit.
+ #
+ # Date: Tue Jan 25 08:28:32 2022 -0800
+ #
+ # On branch master
+ # Your branch is ahead of 'origin/master' by 1 commit.
+ # (use "git push" to publish your local commits)
+ #
+ # Changes to be committed:
+ # modified: aarch64-tdep.c
+ #
+
+2022-01-26 Simon Marchi <simon.marchi@polymtl.ca>
+
+ gdb: add string_file::release method
+ A common pattern for string_file is to want to move out the internal
+ string buffer, because it is the result of the computation that we want
+ to return. It is the reason why string_file::string returns a non-const
+ reference, as explained in the comment. I think it would make sense to
+ have a dedicated method for that instead and make string_file::string
+ return a const reference.
+
+ This allows removing the explicit std::move in the typical case. Note
+ that compile_program::compute was missing a move, meaning that the
+ resulting string was copied. With the new version, it's not possible to
+ forget to move.
+
+ Change-Id: Ieaefa35b73daa7930b2f3a26988b6e3b4121bb79
+
+2022-01-26 Tom Tromey <tromey@adacore.com>
+
+ Add a way to temporarily set a gdb parameter from Python
+ It's sometimes useful to temporarily set some gdb parameter from
+ Python. Now that the 'endian' crash is fixed, and now that the
+ current language is no longer captured by the Python layer, it seems
+ reasonable to add a helper function for this situation.
+
+ This adds a new gdb.with_parameter function. This creates a context
+ manager which temporarily sets some parameter to a specified value.
+ The old value is restored when the context is exited. This is most
+ useful with the Python "with" statement:
+
+ with gdb.with_parameter('language', 'ada'):
+ ... do Ada stuff
+
+ This also adds a simple function to set a parameter,
+ gdb.set_parameter, as suggested by Andrew.
+
+ This is PR python/10790.
+
+ Bug: https://sourceware.org/bugzilla/show_bug.cgi?id=10790
+
+2022-01-26 Tom Tromey <tromey@adacore.com>
+
+ Fix another crash with gdb parameters in Python
+ While looking into the language-capturing issue, I found another way
+ to crash gdb using parameters from Python:
+
+ (gdb) python print(gdb.parameter('endian'))
+
+ (This is related to PR python/12188, though this patch isn't going to
+ fix what that bug is really about.)
+
+ The problem here is that the global variable that underlies the
+ "endian" parameter is initialized to NULL. However, that's not a
+ valid value for an "enum" set/show parameter.
+
+ My understanding is that, in gdb, an "enum" parameter's underlying
+ variable must have a value that is "==" (not just strcmp-equal) to one
+ of the values coming from the enum array. This invariant is relied on
+ in various places.
+
+ I started this patch by fixing the problem with "endian". Then I
+ added some assertions to add_setshow_enum_cmd to try to catch other
+ problems of the same type.
+
+ This patch fixes all the problems that I found. I also looked at all
+ the calls to add_setshow_enum_cmd to ensure that they were all
+ included in the gdb I tested. I think they are: there are no calls in
+ nat-* files, or in remote-sim.c; and I was trying a build with all
+ targets, Python, and Guile enabled.
+
+ Bug: https://sourceware.org/bugzilla/show_bug.cgi?id=12188
+
+2022-01-26 Tom Tromey <tromey@adacore.com>
+
+ Change how Python architecture and language are handled
+ Currently, gdb's Python layer captures the current architecture and
+ language when "entering" Python code. This has some undesirable
+ effects, and so this series changes how this is handled.
+
+ First, there is code like this:
+
+ gdbpy_enter enter_py (python_gdbarch, python_language);
+
+ This is incorrect, because both of these are NULL when not otherwise
+ assigned. This can cause crashes in some cases -- I've added one to
+ the test suite. (Note that this crasher is just an example, other
+ ones along the same lines are possible.)
+
+ Second, when the language is captured in this way, it means that
+ Python code cannot affect the current language for its own purposes.
+ It's reasonable to want to write code like this:
+
+ gdb.execute('set language mumble')
+ ... stuff using the current language
+ gdb.execute('set language previous-value')
+
+ However, this won't actually work, because the language is captured on
+ entry. I've added a test to show this as well.
+
+ This patch changes gdb to try to avoid capturing the current values.
+ The Python concept of the current gdbarch is only set in those few
+ cases where a non-default value is computed or needed; and the
+ language is not captured at all -- instead, in the cases where it's
+ required, the current language is temporarily changed.
+
+2022-01-26 H.J. Lu <hjl.tools@gmail.com>
+
+ bfd: Make bfd.stamp depend on source bfd.texi
+ Make bfd.stamp depend on source bfd.texi to avoid regenerating
+ doc/bfd.info for each make run.
+
+ PR binutils/28807
+ * Makefile.in: Regenerate.
+ * doc/local.mk (%D%/bfd.stamp): Depend on $(srcdir)/%D%/bfd.texi.
+
+2022-01-26 H.J. Lu <hjl.tools@gmail.com>
+
+ ld: Rewrite lang_size_relro_segment_1
+ 1. Compute the desired PT_GNU_RELRO segment base and find the maximum
+ section alignment of sections starting from the PT_GNU_RELRO segment.
+ 2. Find the first preceding load section.
+ 3. Don't add the 1-page gap between the first preceding load section and
+ the relro segment if the maximum page size >= the maximum section
+ alignment. Align the PT_GNU_RELRO segment first. Subtract the maximum
+ page size if therer is still a 1-page gap.
+
+ PR ld/28743
+ PR ld/28819
+ * ldlang.c (lang_size_relro_segment_1): Rewrite.
+ * testsuite/ld-x86-64/pr28743-1.d: New file.
+ * testsuite/ld-x86-64/pr28743-1.s: Likewise.
+ * testsuite/ld-x86-64/x86-64.exp: Run pr28743-1.
+
+2022-01-26 Lancelot SIX <lancelot.six@amd.com>
+
+ gdb/testsuite: Ensure constant test name in gdb.base/break-interp.exp
+ When running the testsuite, I have lines similar to the following in the
+ gdb.sum file:
+
+ ~~~
+ PASS: gdb.base/break-interp.exp: ldprelink=NO: ldsepdebug=NO: first backtrace: p /x 0x7f283d2f0fd1
+ ...
+ PASS: gdb.base/break-interp.exp: ldprelink=NO: ldsepdebug=NO: binprelink=NO: binsepdebug=NO: binpie=NO: INNER: first backtrace: p /x 0x7f00de0317a5
+ ...
+ ~~~
+
+ The address part of the command might change between execution of the
+ test, which adds noise to a diff between two .sum files.
+
+ This patch changes to test name to "p /x $pc" in order to have constant
+ test name.
+
+ Tested on x86_64-Linux.
+
+ Change-Id: I973c1237a084dd6d424276443cbf0920533c9a21
+
+2022-01-26 GDB Administrator <gdbadmin@sourceware.org>
+
+ Automatic date update in version.in
+
+2022-01-25 Tom Tromey <tom@tromey.com>
+
+ Always print the "host libthread-db" message to stdout
+ linux-thread-db.c has a bit of unusual code that unconditionally
+ prints a message, but decides whether to print to gdb_stdout or
+ gdb_stdlog based on a debug flag. It seems better to me to simply
+ always print this; and this is the only spot in gdb where we
+ conditionally pass gdb_stdout to one of the f*_unfiltered functions.
+
+2022-01-25 Tom Tromey <tom@tromey.com>
+
+ Reduce explicit use of gdb_stdout
+ In an earlier version of the pager rewrite series, it was important to
+ audit unfiltered output calls to see which were truly necessary.
+
+ This is no longer necessary, but it still seems like a decent cleanup
+ to change calls to avoid explicitly passing gdb_stdout. That is,
+ rather than using something like fprintf_unfiltered with gdb_stdout,
+ the code ought to use plain printf_unfiltered instead.
+
+ This patch makes this change. I went ahead and converted all the
+ _filtered calls I could find, as well, for the same clarity.
+
+2022-01-25 Tom Tromey <tom@tromey.com>
+
+ Sent timing stats to gdb_stdlog
+ This changes the time / space / symtab per-command statistics code to
+ send its output to gdb_stdlog rather than gdb_stdout. This seems
+ slightly more correct to me.
+
+ Send some error output to gdb_stderr
+ This changes some code to send some error messages to gdb_stderr
+ rather than gdb_stdout.
+
+2022-01-25 Klaus Ziegler <klausz@haus-gisela.de>
+
+ Fix a probem building the binutils on SPARC/amd64
+ PR 28816
+ * elf/common.h (AT_SUN_HWCAP): Make definition conditional.
+
+2022-01-25 H.J. Lu <hjl.tools@gmail.com>
+
+ bfd: Regenerate Makefile.in
+ * Makefile.in: Regenerate.
+
+2022-01-25 Mike Frysinger <vapier@gentoo.org>
+
+ gold: drop old cygnus install hack
+ The gold subdir doesn't actually have a manual, so this hack doesn't
+ do anything. Plus the automake cygnus option was removed years ago
+ by Simon in d0ac1c44885daf68f631befa37e ("Bump to autoconf 2.69 and
+ automake 1.15.1"). So delete it here.
+
+ gas: drop old cygnus install hack
+ This was needed when gas was using the automake cygnus option, but
+ this was removed years ago by Simon in d0ac1c44885daf68f631befa37e
+ ("Bump to autoconf 2.69 and automake 1.15.1"). So delete it here.
+ The info pages are already & still installed by default w/out it.
+
+2022-01-25 GDB Administrator <gdbadmin@sourceware.org>
+
+ Automatic date update in version.in
+
+2022-01-24 H.J. Lu <hjl.tools@gmail.com>
+
+ bfd: Update doc/local.mk
+ PR binutils/28807
+ * Makefile.in: Regenerate.
+ * doc/local.mk (AM_MAKEINFOFLAGS): Add -I "$(srcdir)/%D%" -I %D%.
+ (TEXI2DVI): New.
+ (%D%/bfd.texi): Removed.
+ (doc/bfd/index.html): Remove -I$(srcdir). Replace bfd.texi with
+ %D%/bfd.texi.
+
+2022-01-24 Roland McGrath <mcgrathr@google.com>
+
+ bfd/doc: Fix racy build failure from missing mkdir
+ bfd/
+ * doc/local.mk (%D%/bfdver.texi): Add mkdir command.
+
+2022-01-24 Martin Sebor <msebor@redhat.com>
+
+ Fix a proble building the libiberty library with gcc-12.
+ PR 28779
+ * regex.c: Suppress -Wuse-after-free.
+
+2022-01-24 Andrew Burgess <aburgess@redhat.com>
+
+ gdb/doc: improve description for Window.click on Python TUI windows
+ The description of the Window.click method doesn't mention where the
+ coordinates are anchored (it's the top left corner).
+
+ This minor tweak just mentions this point.
+
+2022-01-24 Nick Clifton <nickc@redhat.com>
+
+ Update Bulgarian, French, Romaniam and Ukranian translation for some of the sub-directories
+
+2022-01-24 GDB Administrator <gdbadmin@sourceware.org>
+
+ Automatic date update in version.in
+
+2022-01-23 Tom Tromey <tom@tromey.com>
+
+ Simplify some Rust expression-evaluation code
+ A few Rust operations do a bit of work in their 'evaluate' functions
+ and then call another function -- but are also the only caller. This
+ patch simplifies this code by removing the extra layer.
+
+ Tested on x86-64 Fedora 34. I'm checking this in.
+
+2022-01-23 H.J. Lu <hjl.tools@gmail.com>
+
+ bfd: Partially revert commit 0e3839bde6f
+ Partially revert
+
+ commit 0e3839bde6f93e1e3eefce815be3636e3d81054d
+ Author: H.J. Lu <hjl.tools@gmail.com>
+ Date: Sun Jan 23 07:29:27 2022 -0800
+
+ bfd: Properly install library and header files
+
+ PR binutils/28807
+ * Makefile.am: Revert bfdlib_LTLIBRARIES and bfdinclude_HEADERS
+ changes.
+ * Makefile.in: Regenerate.
+
+2022-01-23 H.J. Lu <hjl.tools@gmail.com>
+
+ bfd: Properly install library and header files
+ Rename bfdlib_LTLIBRARIES and bfdinclude_HEADERS to lib_LTLIBRARIES and
+ include_HEADERS to fix the missing installed library and header files in
+ bfd caused by
+
+ commit bd32be01c997f686ab0b53f0640eaa0aeb61fbd3
+ Author: Mike Frysinger <vapier@gentoo.org>
+ Date: Fri Dec 3 00:23:20 2021 -0500
+
+ bfd: merge doc subdir up a level
+
+ PR binutils/28807
+ * Makefile.am (bfdlib_LTLIBRARIES): Renamed to ...
+ (lib_LTLIBRARIES): This.
+ (bfdinclude_HEADERS): Renamed to ...
+ (include_HEADERS): This.
+ * Makefile.in: Regenerate.
+ * doc/local.mk (install): Removed.
+
+2022-01-23 H.J. Lu <hjl.tools@gmail.com>
+
+ Regenerate Makefile.in files with automake 1.15.1
+ Regenerate Makefile.in files with the unmodified automake 1.15.1 to
+ remove
+
+ runstatedir = @runstatedir@
+
+ bfd/
+
+ * Makefile.in: Regenerate.
+
+ binutils/
+
+ * Makefile.in: Regenerate.
+
+ gas/
+
+ * Makefile.in: Regenerate.
+
+ gold/
+
+ * Makefile.in: Regenerate.
+ * testsuite/Makefile.in: Likewise.
+
+ gprof/
+
+ * Makefile.in: Regenerate.
+
+ ld/
+
+ * Makefile.in: Regenerate.
+
+ opcodes/
+
+ * Makefile.in: Regenerate.
+
+2022-01-23 H.J. Lu <hjl.tools@gmail.com>
+
+ Regenerate configure files with autoconf 2.69
+ Regenerate configure files with the unmodified autoconf 2.69 to remove
+
+ --runstatedir=DIR modifiable per-process data [LOCALSTATEDIR/run]
+
+ bfd/
+
+ * configure: Regenerate.
+
+ binutils/
+
+ * configure: Regenerate.
+
+ gas/
+
+ * configure: Regenerate.
+
+ gold/
+
+ * configure: Regenerate.
+
+ gprof/
+
+ * configure: Regenerate.
+
+ ld/
+
+ * configure: Regenerate.
+
+ opcodes/
+
+ * configure: Regenerate.
+
+2022-01-23 GDB Administrator <gdbadmin@sourceware.org>
+
+ Automatic date update in version.in
+
+2022-01-22 Mike Frysinger <vapier@gentoo.org>
+
+ bfd: merge doc subdir up a level
+ This avoids a recursive make into the doc subdir and speeds up the
+ build slightly. It also allows for more parallelism.
+
+ bfd: rename core.texi to corefile.texi
+ This is a generated file name from a correspondingly named C file.
+ Rename it to avoid unique build rules since there's no difference
+ to the generated manual.
+
+ bfd: replace doc header generation with pattern rules
+ This unifies boilerplate rules for most files with pattern rules.
+
+2022-01-22 Martin Storsj? <martin@martin.st>
+
+ Allow inferring tmp_prefix from the dll name from a def file.
+
+2022-01-22 Alexander von Gluck IV <kallisti5@unixzen.com>
+
+ Adjust default page sizes for haiku arm.
+ * configure.tgt (arm-haiku): Fix typo.
+ * emulparams/armelf_haiku.su (MAXPAGESIZE): Use the default value.
+ (COMMONPAGESIZE): Likewise.
+
+2022-01-22 Nick Clifton <nickc@redhat.com>
+
+ Update release makeing script with new release numbers
+
+ Change version number to 2.38.50 and regenerate files
+
+ Add markers for 2.38 branch
+
+2022-01-22 Lifang Xia <lifang_xia@linux.alibaba.com>
+
+ RISC-V: create new frag after alignment.
+ PR 28793:
+
+ The alignment may be removed in linker. We need to create new frag after
+ alignment to prevent the assembler from computing static offsets.
+
+ gas/
+ * config/tc-riscv.c (riscv_frag_align_code): Create new frag.
+
+2022-01-22 GDB Administrator <gdbadmin@sourceware.org>
+
+ Automatic date update in version.in
+
+2022-01-21 Simon Marchi <simon.marchi@polymtl.ca>
+
+ gdb: include gdbsupport/buildargv.h in ser-mingw.c
+ Fixes:
+
+ CXX ser-mingw.o
+ /home/simark/src/binutils-gdb/gdb/ser-mingw.c: In function ‘int pipe_windows_open(serial*, const char*)’:
+ /home/simark/src/binutils-gdb/gdb/ser-mingw.c:870:3: error: ‘gdb_argv’ was not declared in this scope
+ 870 | gdb_argv argv (name);
+ | ^~~~~~~~
+
+ Bug: https://sourceware.org/bugzilla/show_bug.cgi?id=28802
+ Change-Id: I7f3e8ec5f9ca8582d587545fdf6b69901259f199
+
+2022-01-21 Nick Clifton <nickc@redhat.com>
+
+ Updated Serbian translation for the ld sub-directory
+
+2022-01-21 Andrew Burgess <aburgess@redhat.com>
+
+ gdb/doc: fill in two missing @r
+ I noticed two places in the docs where we appear to be missing @r.
+ makeinfo seems to do the correct things despite these being
+ missing (at least, I couldn't see any difference in the pdf or info
+ output), but it doesn't hurt to have the @r in place.
+
+2022-01-21 Mike Frysinger <vapier@gentoo.org>
+
+ drop old unused stamp-h.in file
+ This was needed by ancient versions of automake, but that hasn't been
+ the case since at least automake-1.5, so punt this from the tree.
+
+2022-01-21 Simon Marchi <simon.marchi@polymtl.ca>
+
+ gdbsupport/gdb_regex.cc: replace defs.h include with common-defs.h
+ This was forgotten when gdb_regex was moved from gdb to gdbsupport.
+
+ Change-Id: I73b446f71861cabbf7afdb7408ef9d59fa64b804
+
+2022-01-21 GDB Administrator <gdbadmin@sourceware.org>
+
+ Automatic date update in version.in
+
+2022-01-20 Tom Tromey <tromey@adacore.com>
+
+ Avoid bad breakpoints with --gc-sections
+ We found a case where --gc-sections can cause gdb to set an invalid
+ breakpoint. In the included test case, gdb will set a breakpoint with
+ two locations, one of which is 0x0.
+
+ The code in lnp_state_machine::check_line_address is intended to
+ filter out this sort of problem, but in this case, the entire CU is
+ empty, causing unrelocated_lowpc==0x0 -- which circumvents the check.
+
+ It seems to me that if a CU is empty like this, then it is ok to
+ simply ignore the line table, as there won't be any locations anyway.
+
+2022-01-20 GDB Administrator <gdbadmin@sourceware.org>
+
+ Automatic date update in version.in
+
+2022-01-19 Maciej W. Rozycki <macro@embecosm.com>
+
+ Add `set print array-indexes' tests for C/C++ arrays
+ Add `set print array-indexes' tests for C/C++ arrays, complementing one
+ for Fortran arrays.
+
+2022-01-19 Maciej W. Rozycki <macro@embecosm.com>
+
+ Respect `set print array-indexes' with Fortran arrays
+ Add `set print array-indexes' handling for Fortran arrays. Currently
+ the setting is ignored and indices are never shown.
+
+ Keep track of the most recent index handled so that any outstanding
+ repeated elements printed when the limit set by `set print elements' is
+ hit have the correct index shown.
+
+ Output now looks like:
+
+ (gdb) set print array-indexes on
+ (gdb) print array_1d
+ $1 = ((-2) = 1, (-1) = 1, (0) = 1, (1) = 1, (2) = 1)
+ (gdb) set print repeats 4
+ (gdb) set print elements 12
+ (gdb) print array_2d
+ $2 = ((-2) = ((-2) = 2, <repeats 5 times>) (-1) = ((-2) = 2, <repeats 5 times>) (0) = ((-2) = 2, (-1) = 2, ...) ...)
+ (gdb)
+
+ for a 5-element vector and a 5 by 5 array filled with the value of 2.
+
+2022-01-19 Maciej W. Rozycki <macro@embecosm.com>
+
+ Add `set print repeats' tests for C/C++ arrays
+ Add `set print repeats' tests for C/C++ arrays, complementing one for
+ Fortran arrays and covering the different interpretation of the `set
+ print elements' setting in particular where the per-dimension count of
+ the elements handled is matched against the trigger rather than the
+ total element count as with Fortran arrays.
+
+2022-01-19 Maciej W. Rozycki <macro@embecosm.com>
+
+ Respect `set print repeats' with Fortran arrays
+ Implement `set print repeats' handling for Fortran arrays. Currently
+ the setting is ignored and always treated as if no limit was set.
+
+ Unlike the generic array walker implemented decades ago the Fortran one
+ is a proper C++ class. Rather than trying to mimic the old walker then,
+ which turned out a bit of a challenge where interacting with the `set
+ print elements' setting, write it entirely from scratch, by adding an
+ extra specialization handler method for processing dimensions other than
+ the innermost one and letting the specialization class call the `walk_1'
+ method from the handler as it sees fit. This way repeats can be tracked
+ and the next inner dimension recursed into as a need arises only, or
+ unconditionally in the base class.
+
+ Keep track of the dimension number being handled in the class rather as
+ a parameter to the walker so that it does not have to be passed across
+ by the specialization class.
+
+ Use per-dimension element count tracking, needed to terminate processing
+ early when the limit set by `set print elements' is hit. This requires
+ extra care too where the limit triggers exactly where another element
+ that is a subarray begins. In that case rather than recursing we need
+ to terminate processing or lone `(...)' would be printed. Additionally
+ if the skipped element is the last one in the current dimension we need
+ to print `...' by hand, because `continue_walking' won't print it at the
+ upper level, because it can see the last element has already been taken
+ care of.
+
+ Preserve the existing semantics of `set print elements' where the total
+ count of the elements handled is matched against the trigger level which
+ is unlike with the C/C++ array printer where the per-dimension element
+ count is used instead.
+
+ Output now looks like:
+
+ (gdb) set print repeats 4
+ (gdb) print array_2d
+ $1 = ((2, <repeats 5 times>) <repeats 5 times>)
+ (gdb) set print elements 12
+ (gdb) print array_2d
+ $2 = ((2, <repeats 5 times>) (2, <repeats 5 times>) (2, 2, ...) ...)
+ (gdb)
+
+ for a 5 by 5 array filled with the value of 2.
+
+ Amend existing test cases accordingly that rely on the current incorrect
+ behavior and explicitly request that there be no limit for printing
+ repeated elements there.
+
+ Add suitable test cases as well covering sliced arrays in particular.
+
+ Co-Authored-By: Andrew Burgess <andrew.burgess@embecosm.com>
+
+2022-01-19 John Baldwin <jhb@FreeBSD.org>
+
+ fbsd-nat: Add include for gdb_argv.
+
+2022-01-19 Alan Modra <amodra@gmail.com>
+
+ PowerPC64 DT_RELR ELFv1
+ More fun with R_PPC64_NONE found in .opd. Fixed by the
+ allocate_dynrelocs and ppc64_elf_size_dynamic_sections changes, and
+ since we are doing ifunc, opd and SYMBOL_REFERENCES_LOCAL tests later,
+ don't duplicate that work in check_relocs.
+
+ * elf64-ppc.c (ppc64_elf_check_relocs): Remove opd and ifunc
+ conditions for rel_count.
+ (dec_dynrel_count): Likewise.
+ (allocate_dynrelocs): Test for opd and ifunc when allocating
+ relative relocs.
+ (ppc64_elf_size_dynamic_sections): Likewise.
+
+2022-01-19 Alan Modra <amodra@gmail.com>
+
+ PowerPC64 DT_RELR local PLT
+ Similarly to the local GOT case.
+
+ * elf64-ppc.c (ppc64_elf_size_dynamic_sections): Don't allocate
+ space for PLT relocs against local syms when enable_dt_relr.
+
+2022-01-19 Alan Modra <amodra@gmail.com>
+
+ PowerPC64 DT_RELR local GOT
+ Fixes another case where we end up with superfluous R_PPC64_NONE.
+
+ * elf64-ppc.c (ppc64_elf_size_dynamic_sections): Don't allocate
+ space for GOT relocs against non-TLS local syms when enable_dt_relr.
+ (ppc64_elf_layout_multitoc): Likewise.
+
+2022-01-19 GDB Administrator <gdbadmin@sourceware.org>
+
+ Automatic date update in version.in
+
+2022-01-18 Alan Modra <amodra@gmail.com>
+
+ Re: PowerPC64 DT_RELR
+ HJ: "There are 238 R_PPC64_NONEs in libc.so.6 alone."
+ Indeed, let's make them go away. I had the SYMBOL_REFERENCES_LOCAL
+ test in the wrong place. check_relocs is too early to know whether a
+ symbol is dynamic in a shared library. Lots of glibc symbols are made
+ local by version script, but that doesn't happen until
+ size_dynamic_sections.
+
+ * elf64-ppc.c (ppc64_elf_check_relocs): Don't count relative relocs
+ here depending on SYMBOL_REFERENCES_LOCAL.
+ (dec_dynrel_count): Likewise.
+ (allocate_dynrelocs): Do so here instead.
+
+2022-01-18 Tom Tromey <tom@tromey.com>
+
+ Fix the remote-sim.c build
+ My earlier patch to move gdb_argv broke the remote-sim.c build. This
+ patch fixes the bug. I'm checking it in.
+
+2022-01-18 Simon Marchi <simon.marchi@polymtl.ca>
+
+ gdbserver: introduce remote_debug_printf
+ Add remote_debug_printf, and use it for all debug messages controlled by
+ remote_debug.
+
+ Change remote_debug to be a bool, which is trivial in this case.
+
+ Change-Id: I90de13cb892faec3830047b571661822b126d6e8
+
+2022-01-18 Simon Marchi <simon.marchi@polymtl.ca>
+
+ gdbserver: introduce threads_debug_printf, THREADS_SCOPED_DEBUG_ENTER_EXIT
+ Add the threads_debug_printf and THREADS_SCOPED_DEBUG_ENTER_EXIT, which
+ use the logging infrastructure from gdbsupport/common-debug.h. Replace
+ all debug_print uses that are predicated by debug_threads with
+ threads_dethreads_debug_printf. Replace uses of the debug_enter and
+ debug_exit macros with THREADS_SCOPED_DEBUG_ENTER_EXIT, which serves
+ essentially the same purpose, but allows showing what comes between the
+ enter and the exit in an indented form.
+
+ Note that "threads" debug is currently used for a bit of everything in
+ GDBserver, not only threads related stuff. It should ideally be cleaned
+ up and separated logically as is done in GDB, but that's out of the
+ scope of this patch.
+
+ Change-Id: I2d4546464462cb4c16f7f1168c5cec5a89f2289a
+
+2022-01-18 Simon Marchi <simon.marchi@polymtl.ca>
+
+ gdbserver: turn debug_threads into a boolean
+ debug_threads is always used as a boolean. Except in ax.cc and
+ tracepoint.cc. These files have their own macros that use
+ debug_threads, and have a concept of verbosity level. But they both
+ have a single level, so it's just a boolean in the end.
+
+ Remove this concept of level. If we ever want to re-introduce it, I
+ think it will be better implemented in a more common location.
+
+ Change debug_threads to bool and adjust some users that were treating it
+ as an int.
+
+ Change-Id: I137f596eaf763a08c977dd74417969cedfee9ecf
+
+2022-01-18 Tom Tromey <tom@tromey.com>
+
+ Simplify Ada catchpoints
+ All the Ada catchpoints use the same breakpoint_ops contents, because
+ the catchpoint itself records its kind. This patch simplifies the
+ code by removing the redundant ops structures.
+
+ Move "catch exec" to a new file
+ The "catch exec" code is reasonably self-contained, and so this patch
+ moves it out of breakpoint.c (the second largest source file in gdb)
+ and into a new file, break-catch-exec.c.
+
+ Move "catch fork" to a new file
+ The "catch fork" code is reasonably self-contained, and so this patch
+ moves it out of breakpoint.c (the second largest source file in gdb)
+ and into a new file, break-catch-fork.c.
+
+ Unify "catch fork" and "catch vfork"
+ I noticed that "catch fork" and "catch vfork" are nearly identical.
+ This patch simplifies the code by unifying these two cases.
+
+ Move gdb_regex to gdbsupport
+ This moves the gdb_regex convenience class to gdbsupport.
+
+ Introduce gdb-hashtab module in gdbsupport
+ gdb has some extensions and helpers for working with the libiberty
+ hash table. This patch consolidates these and moves them to
+ gdbsupport.
+
+ Move gdb obstack code to gdbsupport
+ This moves the gdb-specific obstack code -- both extensions like
+ obconcat and obstack_strdup, and things like auto_obstack -- to
+ gdbsupport.
+
+ Move gdb_argv to gdbsupport
+ This moves the gdb_argv class to a new header in gdbsupport.
+
+ Simplify event_location_probe
+ event_location_probe currently stores two strings, but really only
+ needs one. This patch simplifies it and removes some unnecessary
+ copies as well.
+
+ Use std::string in event_location
+ This changes event_location to use std::string, removing some manual
+ memory management, and an unnecessary string copy.
+
+ Split event_location into subclasses
+ event_location uses the old C-style discriminated union approach.
+ However, it's better to use subclassing, as this makes the code
+ clearer and removes some chances for error. This also enables future
+ cleanups to avoid manual memory management and copies.
+
+ Remove EL_* macros from location.c
+ This patch removes the old-style EL_* macros from location.c. This
+ cleans up the code by itself, IMO, but also enables further cleanups
+ in subsequent patches.
+
+ Boolify explicit_to_string_internal
+ This changes explicit_to_string_internal to use 'bool' rather than
+ 'int'.
+
+ Remove a use of xfree in location.c
+ This small cleanup removes a use of xfree from location.c, by
+ switching to unique_xmalloc_ptr. One function is only used in
+ location.c, so it is made static. And, another function is changed to
+ avoid a copy.
+
+2022-01-18 Simon Marchi <simon.marchi@polymtl.ca>
+
+ gdb: use ptid_t::to_string instead of target_pid_to_str in debug statements
+ Same idea as 0fab79556484 ("gdb: use ptid_t::to_string in infrun debug
+ messages"), but throughout GDB.
+
+ Change-Id: I62ba36eaef29935316d7187b9b13d7b88491acc1
+
+2022-01-18 Andrew Burgess <aburgess@redhat.com>
+
+ gdb: preserve `|` in connection details string
+ Consider this GDB session:
+
+ $ gdb -q
+ (gdb) target remote | gdbserver - ~/tmp/hello.x
+ Remote debugging using | gdbserver - ~/tmp/hello.x
+ ... snip ...
+ (gdb) info connections
+ Num What Description
+ * 1 remote gdbserver - ~/tmp/hello.x Remote target using gdb-specific protocol
+ (gdb) python conn = gdb.selected_inferior().connection
+ (gdb) python print(conn.details)
+ gdbserver - ~/tmp/hello.x
+ (gdb)
+
+ I think there are two things wrong here, first in the "What" column of
+ the 'info connections' output, I think the text should be:
+
+ remote | gdbserver - ~/tmp/hello.x
+
+ to correctly show the user how the connection was established. And in
+ a similar fashion, I think that the `details` string of the
+ gdb.TargetConnection object should be:
+
+ | gdbserver - ~/tmp/hello.x
+
+ This commit makes this change. Currently the '|' is detected and
+ removed in gdb/serial.c. The string passed to the pipe_ops
+ structure (from gdb/ser-pipe.c), doesn't then, contain the `|`, this
+ is instead implied by the fact that it is a pipes based implementation
+ of the serial_ops interface.
+
+ After this commit we still detect the `|` in gdb/serial.c, but we now
+ store the full string (including the `|`) in the serial::name member
+ variable.
+
+ For pipe based serial connections, this name is only used for
+ displaying the two fields I mention above, and in pipe_open (from
+ gdb/ser-pipe.c), and in pipe_open, we now know to skip over the `|`.
+
+ The benefit I see from this change is that GDB's output now more
+ accurately reflects the commands used to start a target, thus making
+ it easier for a user to understand what is going on.
+
+2022-01-18 Tiezhu Yang <yangtiezhu@loongson.cn>
+
+ gdb: testsuite: print explicit test result for gdb.base/dfp-test.exp
+ In the current code, if decimal floating point is not supported for
+ this target, there is no binary file dfp-test, and also there is no
+ test result after execute the following commands:
+
+ $ make check-gdb TESTS="gdb.base/dfp-test.exp"
+ $ grep error gdb/testsuite/gdb.log
+ /home/loongson/gdb.git/gdb/testsuite/gdb.base/dfp-test.c:39:1: error: decimal floating point not supported for this target
+ [...]
+ $ cat gdb/testsuite/gdb.sum
+ [...]
+ Running target unix
+ Running /home/loongson/gdb.git/gdb/testsuite/gdb.base/dfp-test.exp ...
+
+ === gdb Summary ===
+ [...]
+
+ With this patch:
+
+ $ make check-gdb TESTS="gdb.base/dfp-test.exp"
+ $ cat gdb/testsuite/gdb.sum
+ [...]
+ Running target unix
+ Running /home/loongson/gdb.git/gdb/testsuite/gdb.base/dfp-test.exp ...
+ UNSUPPORTED: gdb.base/dfp-test.exp: decimal floating point not supported for this target.
+
+ === gdb Summary ===
+
+ # of unsupported tests 1
+ [...]
+
+2022-01-18 Simon Marchi <simon.marchi@efficios.com>
+
+ bfd/elf64-ppc.c: fix clang -Wbitwise-instead-of-logical warning in ppc64_elf_check_init_fini
+ I see this error with clang-14:
+
+ CC elf64-ppc.lo
+ /home/smarchi/src/binutils-gdb/bfd/elf64-ppc.c:13131:11: error: use of bitwise '&' with boolean operands [-Werror,-Wbitwise-instead-of-logical]
+ return (check_pasted_section (info, ".init")
+ ~^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+
+ Fix by replacing & with &&. But given that the check_pasted_section
+ function has side-effects and we want to make sure both calls are made,
+ assign to temporary variables before evaluating the `&&`.
+
+ Change-Id: I849e1b2401bea5f4d8ef3ab9af99ba9e3ef42490
+
+2022-01-18 Alan Modra <amodra@gmail.com>
+
+ PR28029, debuginfod tests
+ binutils/NEWS says of the change in --process-links semantics:
+ If other debug section display options are also enabled (eg
+ --debug-dump=info) then the contents of matching sections in both the main
+ file and the separate debuginfo file *will* be displayed. This is because in
+ most cases the debug section will only be present in one of the files.
+
+ Implying that debug info is dumped without --process-links. Indeed
+ that appears to be the case for readelf. This does the same for
+ objdump.
+
+ PR 28029
+ * objdump.c (dump_bfd): Do not exit early when !is_mainfile
+ && !processlinks, instead just exclude non-debug output.
+ (dump_dwarf): Add is_mainfile parameter and pass to
+ dump_dwarf_section.
+ (dump_dwarf_section): Only display debug sections when
+ !is_mainfile and !process_links.
+
+2022-01-18 Alan Modra <amodra@gmail.com>
+
+ Check thin archive element file size against archive header
+ Makes it a little less likely for someone to break their thin archives.
+
+ * archive.c (_bfd_get_elt_at_filepos): Check thin archive
+ element file size.
+
+2022-01-18 Alan Modra <amodra@gmail.com>
+
+ lang_size_relro_segment tidy
+ This function has seen too many minimal change style edits.
+ No functional changes in this patch.
+
+ * ldlang.c (lang_size_relro_segment): Tidy.
+
+2022-01-18 Alan Modra <amodra@gmail.com>
+
+ PowerPC64 DT_RELR
+ PowerPC64 takes a more traditional approach to DT_RELR than x86. Count
+ relative relocs in check_relocs, allocate space for them and output in
+ the usual places but not doing so when enable_dt_relr. DT_RELR is
+ sized in the existing ppc stub relaxation machinery, run via the
+ linker's ldemul_after_allocation hook. DT_RELR is output in the same
+ function that writes ppc stubs, run via ldemul_finish.
+
+ This support should be considered experimental.
+
+ bfd/
+ * elf64-ppc.c (struct ppc_local_dyn_relocs): Renamed from
+ ppc_dyn_relocs. Add rel_count field. Update uses.
+ (struct ppc_dyn_relocs): New. Replace all uses of elf_dyn_relocs.
+ (struct ppc_link_hash_table): Add relr_alloc, relr_count and
+ relr_addr.
+ (ppc64_elf_copy_indirect_symbol): Merge rel_count.
+ (ppc64_elf_check_relocs): Init rel_count for global and local syms.
+ (dec_dynrel_count): Change r_info param to reloc pointer. Update
+ all callers. Handle decrementing rel_count.
+ (allocate_got): Don't allocate space for relative relocs when
+ enable_dt_relr.
+ (allocate_dynrelocs): Likewise.
+ (ppc64_elf_size_dynamic_sections): Likewise. Handle srelrdyn.
+ (ppc_build_one_stub): Don't emit relative relocs on .branch_lt.
+ (compare_relr_address, append_relr_off): New functions.
+ (got_and_plt_relr_for_local_syms, got_and_plt_relr): Likewise.
+ (ppc64_elf_size_stubs): Size .relr.syn.
+ (ppc64_elf_build_stubs): Emit .relr.dyn.
+ (build_global_entry_stubs_and_plt): Don't output relative relocs
+ when enable_dt_relr.
+ (write_plt_relocs_for_local_syms): Likewise.
+ (ppc64_elf_relocate_section): Likewise.
+ binutils/
+ * testsuite/lib/binutils-common.exp (supports_dt_relr): Add
+ powerpc64.
+ ld/
+ * emulparams/elf64ppc.sh: Source dt-relr.sh.
+ * testsuite/ld-elf/dt-relr-2b.d: Adjust for powerpc.
+ * testsuite/ld-elf/dt-relr-2c.d: Likewise.
+ * testsuite/ld-elf/dt-relr-2d.d: Likewise.
+ * testsuite/ld-elf/dt-relr-2e.d: Likewise.
+
+2022-01-18 Alan Modra <amodra@gmail.com>
+
+ tweak __ehdr_start visibility and flags for check_relocs
+ bfd/
+ * elf-bfd.h (UNDEFWEAK_NO_DYNAMIC_RELOC): Test linker_def.
+ ld/
+ * ldelf.c (ldelf_before_allocation): Don't force __ehdr_start
+ local and hidden here..
+ * ldlang.c (lang_symbol_tweaks): ..do so here instead and set
+ def_regular and linker_def for check_relocs. New function
+ extracted from lang_process.
+
+2022-01-18 GDB Administrator <gdbadmin@sourceware.org>
+
+ Automatic date update in version.in
+
+2022-01-17 Nick Clifton <nickc@redhat.com>
+
+ Update the config.guess and config.sub files from the master repository and regenerate files.
+
+2022-01-17 Sergey Belyashov <sergey.belyashov@gmail.com>
+
+ Fix Z80 assembly failure.
+ PR 28762
+ * app.c (do_scrub_chars): Correct handling when the symbol is not 'af'.
+
+2022-01-17 Simon Marchi <simon.marchi@polymtl.ca>
+
+ gdb/infrun: rename variable and move to more specific scope
+ Move the "started" variable to the scope it's needed, and rename it to
+ "step_over_started".
+
+ Change-Id: I56f3384dbd328f55198063bb855edda10f1492a3
+
+2022-01-17 Jan Beulich <jbeulich@suse.com>
+
+ x86: adjust struct instr_info field types
+ Now that this lives on the stack, let's have it be a little less
+ wasteful in terms of space. Switch boolean fields to "bool" (also when
+ this doesn't change their size) and also limit the widths of "rex",
+ "rex_used", "op_ad", and "op_index". Do a little bit of re-ordering as
+ well to limit the number of padding holes.
+
+ x86: drop index16 field
+ There's a single use on a generally infrequently taken code path. Put
+ the necessary conditional there instead.
+
+ x86: drop most Intel syntax register name arrays
+ By making use of, in particular, oappend_maybe_intel() there's no need
+ for this redundant set of static data.
+
+ x86: fold variables in memory operand index handling
+ There's no real need for the pseudo-boolean "haveindex" or for separate
+ 32-bit / 64-bit index pointers. Fold them into a single "indexes" and
+ set that uniformly to AT&T names, compensating by emitting the register
+ name via oappend_maybe_intel().
+
+ x86: constify disassembler static data
+ Now that the code is intended to be largely thread-safe, we'd better not
+ have any writable static objects.
+
+2022-01-17 GDB Administrator <gdbadmin@sourceware.org>
+
+ Automatic date update in version.in
+
+2022-01-16 Joel Brobecker <brobecker@adacore.com>
+
+ gdb/copyright.py: Do not update gdbsupport/Makefile.in
+ This file is generated, so we should not modify it (any modification
+ we make is going to be undone at the next re-generation anyway).
+
+2022-01-16 GDB Administrator <gdbadmin@sourceware.org>
+
+ Automatic date update in version.in
+
+2022-01-15 GDB Administrator <gdbadmin@sourceware.org>
+
+ Automatic date update in version.in
+
+2022-01-14 Simon Marchi <simon.marchi@efficios.com>
+
+ gdb.dlang/demangle.exp: update expected output for _D8demangle4testFnZv
+ Since commit ce2d3708bc8b ("Synchronize binutils libiberty sources with
+ gcc version."), I see this failure:
+
+ demangle _D8demangle4testFnZv^M
+ demangle.test(typeof(null))^M
+ (gdb) FAIL: gdb.dlang/demangle.exp: _D8demangle4testFnZv
+
+ The commit imported the commit 0e32a5aa8bc9 ("libiberty: Add support for
+ D `typeof(*null)' types") from the gcc repository. That commit includes
+ an update to libiberty/testsuite/d-demangle-expected, which updates a
+ test for the exact same mangled name:
+
+ _D8demangle4testFnZv
+ -demangle.test(none)
+ +demangle.test(typeof(null))
+
+ I don't know anything about D, but give that the change was made by Iain
+ Buclaw, the D language maintainer, I trust him on that.
+
+ Fix our test by updating the expected output in the same way.
+
+ Note: it's not really useful to have all these D demangling tests in the
+ GDB testsuite, since there are demangling tests in libiberty. We should
+ consider removing them, but we first need to make sure that everything
+ that is covered in gdb/testsuite/gdb.dlang/demangle.exp is also covered
+ in libiberty/testsuite/d-demangle-expected.
+
+ Change-Id: If2b290ea8367b8e1e0b90b20d4a6e0bee517952d
+
+2022-01-14 Nils-Christian Kempke <nils-christian.kempke@intel.com>
+
+ gdb/testsuite: enable __INTEL_LLVM_COMPILER preprocessor in get_compiler_info
+ Intel Next Gen compiler defines preprocessor __INTEL_LLVM_COMPILER and provides
+ version info in __clang_version__ e.g. value: 12.0.0 (icx 2020.10.0.1113).
+
+ gdb/testsuite/ChangeLog:
+ 2020-12-07 Abdul Basit Ijaz <abdul.b.ijaz@intel.com>
+
+ * lib/compiler.c: Add Intel next gen compiler pre-processor check.
+ * lib/compiler.cc: Ditto.
+ * lib/fortran.exp (fortran_main): Check Intel next gen compiler in
+ test_compiler_info.
+
+2022-01-14 Alan Modra <amodra@gmail.com>
+
+ PR28751 mbind2a / mbind2b regressions on powerpc*-linux
+ include/
+ * bfdlink.h (struct bfd_link_info): Add commonpagesize_is_set.
+ ld/
+ PR 28751
+ * emultempl/elf.em (handle_option): Set commonpagesize_is_set.
+ * ldelf.c (ldelf_after_parse): Don't error when only one of
+ -z max-page-size or -z common-page-size is given, correct the
+ other value to make it sane.
+ * testsuite/ld-elf/elf.exp (mbind2a, mbind2b): Do not pass
+ -z max-page-size.
+
+2022-01-14 Jan Beulich <jbeulich@suse.com>
+
+ x86: drop ymmxmm_mode
+ This enumerator is not used by any table entry.
+
+ x86: share yet more VEX table entries with EVEX decoding
+ On top of prior similar work more opportunities have appeared in the
+ meantime. Note that this also happens to address the prior lack of
+ decoding of EVEX.L'L for VMOV{L,H}P{S,D} and VMOV{LH,HL}PS.
+
+ x86: consistently use scalar_mode for AVX512-FP16 scalar insns
+ For some reason the original AVFX512F insns were not taken as a basis
+ here, causing unnecessary divergence. While not an active issue, it is
+ still relevant to note that OP_XMM() has special treatment of e.g.
+ scalar_mode (marking broadcast as invalid). Such would better be
+ consistent for all sufficiently similar insns.
+
+ x86: record further wrong uses of EVEX.b
+ For one EVEX.W set does not imply EVEX.b is uniformly valid. Reject it
+ for modes which occur for insns allowing for EVEX.W to be set (noticed
+ with VMOV{H,L}PD and VMOVDDUP, and only in AT&T mode, but not checked
+ whether further insns would also have been impacted; I expect e.g.
+ VCMPSD would have had the same issue). And then the present concept of
+ broadcast makes no sense at all when the memory operand of an insn is
+ the destination.
+
+2022-01-14 Jan Beulich <jbeulich@suse.com>
+
+ x86: reduce AVX512 FP set of insns decoded through vex_w_table[]
+ Like for AVX512-FP16, there's not that many FP insns where going through
+ this table is easier / cheaper than using suitable macros. Utilize %XS
+ and %XD more to eliminate a fair number of table entries.
+
+ While doing this I noticed a few anomalies. Where lines get touched /
+ moved anyway, these are being addressed right here:
+ - vmovshdup used EXx for its 2nd operand, thus displaying seemingly
+ valid broadcast when EVEX.b is set with a memory operand; use
+ EXEvexXNoBcst instead just like vmovsldup already does
+ - vmovlhps used EXx for its 3rd operand, when all sibling entries use
+ EXq; switch to EXq there for consistency (the two differ only for
+ memory operands)
+
+2022-01-14 Jan Beulich <jbeulich@suse.com>
+
+ x86: reduce AVX512-FP16 set of insns decoded through vex_w_table[]
+ Like already indicated during review of the original submission, there's
+ really only very few insns where going through this table is easier /
+ cheaper than using suitable macros. Utilize %XH more and introduce
+ similar %XS and %XD (which subsequently can be used for further table
+ size reduction).
+
+ While there also switch to using oappend() in 'XH' macro processing.
+
+2022-01-14 GDB Administrator <gdbadmin@sourceware.org>
+
+ Automatic date update in version.in
+
+2022-01-13 H.J. Lu <hjl.tools@gmail.com>
+
+ ld: Disable DT_RELR in some -z relro tests
+ Disable DT_RELR in the following -z relro tests which don't expect
+ DT_RELR in linker outputs.
+
+ * testsuite/ld-i386/pr20830.d: Pass $NO_DT_RELR_LDFLAGS to ld.
+ * testsuite/ld-x86-64/pr20830a-now.d: Likewise.
+ * testsuite/ld-x86-64/pr20830a.d: Likewise.
+ * testsuite/ld-x86-64/pr20830b-now.d: Likewise.
+ * testsuite/ld-x86-64/pr20830b.d: Likewise.
+ * testsuite/ld-x86-64/pr21038a-now.d: Likewise.
+ * testsuite/ld-x86-64/pr21038a.d: Likewise.
+ * testsuite/ld-x86-64/pr21038b-now.d: Likewise.
+ * testsuite/ld-x86-64/pr21038c-now.d: Likewise.
+ * testsuite/ld-x86-64/pr21038c.d: Likewise.
+
+2022-01-13 H.J. Lu <hjl.tools@gmail.com>
+
+ Reapply libiberty: Pass --plugin to AR and RANLIB
+ Reapply the patch to detect GCC LTO plugin used for libiberty build to
+ support LTO build in libiberty.
+
+ * Makefile.in (AR): Add @AR_PLUGIN_OPTION@
+ (RANLIB): Add @RANLIB_PLUGIN_OPTION@.
+ (configure_deps): Depend on ../config/gcc-plugin.m4.
+ * aclocal.m4: Include ../config/gcc-plugin.m4.
+ * configure.ac: AC_SUBST AR_PLUGIN_OPTION and
+ RANLIB_PLUGIN_OPTION.
+ * configure: Regenerate.
+
+2022-01-13 H.J. Lu <hjl.tools@gmail.com>
+
+ elf: Remove the 1-page gap before the RELRO segment
+ The existing RELRO scheme may leave a 1-page gap before the RELRO segment
+ and align the end of the RELRO segment to the page size:
+
+ [18] .eh_frame PROGBITS 408fa0 008fa0 005e80 00 A 0 0 8
+ [19] .init_array INIT_ARRAY 410de0 00fde0 000008 08 WA 0 0 8
+ [20] .fini_array FINI_ARRAY 410de8 00fde8 000008 08 WA 0 0 8
+ [21] .dynamic DYNAMIC 410df0 00fdf0 000200 10 WA 7 0 8
+ [22] .got PROGBITS 410ff0 00fff0 000010 08 WA 0 0 8
+ [23] .got.plt PROGBITS 411000 010000 000048 08 WA 0 0 8
+
+ Instead, we can remove the 1-page gap if the maximum page size >= the
+ maximum section alignment:
+
+ [18] .eh_frame PROGBITS 408fa0 008fa0 005e80 00 A 0 0 8
+ [19] .init_array INIT_ARRAY 40fde0 00fde0 000008 08 WA 0 0 8
+ [20] .fini_array FINI_ARRAY 40fde8 00fde8 000008 08 WA 0 0 8
+ [21] .dynamic DYNAMIC 40fdf0 00fdf0 000200 10 WA 7 0 8
+ [22] .got PROGBITS 40fff0 00fff0 000010 08 WA 0 0 8
+ [23] .got.plt PROGBITS 410000 010000 000048 08 WA 0 0 8
+
+ Because the end of the RELRO segment is always aligned to the page size
+ and may not be moved, the RELRO segment size may be increased:
+
+ [ 3] .dynstr STRTAB 000148 000148 000001 00 A 0 0 1
+ [ 4] .eh_frame PROGBITS 000150 000150 000000 00 A 0 0 8
+ [ 5] .init_array INIT_ARRAY 200150 000150 000010 08 WA 0 0 1
+ [ 6] .fini_array FINI_ARRAY 200160 000160 000010 08 WA 0 0 1
+ [ 7] .jcr PROGBITS 200170 000170 000008 00 WA 0 0 1
+ [ 8] .data.rel.ro PROGBITS 200180 000180 000020 00 WA 0 0 16
+ [ 9] .dynamic DYNAMIC 2001a0 0001a0 0001c0 10 WA 3 0 8
+ [10] .got PROGBITS 200360 000360 0002a8 00 WA 0 0 8
+ [11] .bss NOBITS 201000 000608 000840 00 WA 0 0 1
+
+ vs the old section layout:
+
+ [ 3] .dynstr STRTAB 000148 000148 000001 00 A 0 0 1
+ [ 4] .eh_frame PROGBITS 000150 000150 000000 00 A 0 0 8
+ [ 5] .init_array INIT_ARRAY 200b48 000b48 000010 08 WA 0 0 1
+ [ 6] .fini_array FINI_ARRAY 200b58 000b58 000010 08 WA 0 0 1
+ [ 7] .jcr PROGBITS 200b68 000b68 000008 00 WA 0 0 1
+ [ 8] .data.rel.ro PROGBITS 200b70 000b70 000020 00 WA 0 0 16
+ [ 9] .dynamic DYNAMIC 200b90 000b90 0001c0 10 WA 3 0 8
+ [10] .got PROGBITS 200d50 000d50 0002a8 00 WA 0 0 8
+ [11] .bss NOBITS 201000 000ff8 000840 00 WA 0 0 1
+
+ But there is no 1-page gap.
+
+ PR ld/28743
+ * ldlang.c (lang_size_relro_segment_1): Remove the 1-page gap
+ before the RELRO segment if the maximum page size >= the maximum
+ section alignment.
+ * testsuite/ld-i386/pr20830.d: Adjusted.
+ * testsuite/ld-s390/gotreloc_64-relro-1.dd: Likewise.
+ * testsuite/ld-x86-64/pr14207.d: Likewise.
+ * testsuite/ld-x86-64/pr18176.d: Likewise.
+ * testsuite/ld-x86-64/pr20830a-now.d: Likewise.
+ * testsuite/ld-x86-64/pr20830a.d: Likewise.
+ * testsuite/ld-x86-64/pr20830b-now.d: Likewise.
+ * testsuite/ld-x86-64/pr20830b.d: Likewise.
+ * testsuite/ld-x86-64/pr21038a-now.d: Likewise.
+ * testsuite/ld-x86-64/pr21038a.d: Likewise.
+ * testsuite/ld-x86-64/pr21038b-now.d: Likewise.
+ * testsuite/ld-x86-64/pr21038c-now.d: Likewise.
+ * testsuite/ld-x86-64/pr21038c.d: Likewise.
+
+2022-01-13 Nick Clifton <nickc@redhat.com>
+
+ Synchronize binutils libiberty sources with gcc version.
+ +2021-12-30 Lancelot SIX <lsix@lancelotsix.com>
+ +
+ + * cp-demangle.c (d_clone_suffix): Support digits in clone tag
+ + names.
+ + * testsuite/demangle-expected: Check demangling of clone symbols
+ + with digits in name.
+ +
+ +2021-12-16 H.J. Lu <hjl.tools@gmail.com>
+ +
+ + Revert:
+ + 2021-12-16 H.J. Lu <hjl.tools@gmail.com>
+ +
+ + * Makefile.in (AR): Add @AR_PLUGIN_OPTION@
+ + (RANLIB): Add @RANLIB_PLUGIN_OPTION@.
+ + (configure_deps): Depend on ../config/gcc-plugin.m4.
+ + * configure.ac: AC_SUBST AR_PLUGIN_OPTION and
+ + RANLIB_PLUGIN_OPTION.
+ + * aclocal.m4: Regenerated.
+ + * configure: Likewise.
+ +
+ +2021-12-15 H.J. Lu <hjl.tools@gmail.com>
+ +
+ + * Makefile.in (AR): Add @AR_PLUGIN_OPTION@
+ + (RANLIB): Add @RANLIB_PLUGIN_OPTION@.
+ + (configure_deps): Depend on ../config/gcc-plugin.m4.
+ + * configure.ac: AC_SUBST AR_PLUGIN_OPTION and
+ + RANLIB_PLUGIN_OPTION.
+ + * aclocal.m4: Regenerated.
+ + * configure: Likewise.
+ +
+ +2021-11-29 Eric Gallager <egallager@gcc.gnu.org>
+ +
+ + PR other/103021
+ + * Makefile.in: Use ETAGS variable in TAGS target.
+ + * configure: Regenerate.
+ + * configure.ac: Allow ETAGS variable to be overridden.
+ +
+ +2021-11-29 Andrew Pinski <apinski@marvell.com>
+ +
+ + * make-temp-file.c (try_dir): Check to see if the dir
+ + is actually a directory.
+ +
+ +2021-10-22 Eric Gallager <egallager@gcc.gnu.org>
+ +
+ + PR other/102663
+ + * Makefile.in: Allow dvi-formatted documentation
+ + to be installed.
+ +
+ +2021-10-17 Lu?s Ferreira <contact@lsferreira.net>
+ +
+ + PR d/102618
+ + * d-demangle.c (dlang_parse_qualified): Handle anonymous
+ + symbols correctly.
+ + * testsuite/d-demangle-expected: New tests to cover anonymous
+ + symbols.
+ +
+ +2021-10-14 Lu?s Ferreira <contact@lsferreira.net>
+ +
+ + * testsuite/d-demangle-expected: Add test case for function literals.
+ +
+ +2021-10-14 Lu?s Ferreira <contact@lsferreira.net>
+ +
+ + * testsuite/d-demangle-expected: Add test cases for simple special
+ + mangles.
+ +
+ +2021-10-12 Lu?s Ferreira <contact@lsferreira.net>
+ +
+ + * d-demangle.c (dlang_parse_qualified): Remove redudant parenthesis
+ + around lhs and rhs of assignments.
+ +
+ +2021-10-01 Lu?s Ferreira <contact@lsferreira.net>
+ +
+ + * testsuite/d-demangle-expected: Add missing format for new test
+ +
+ +2021-09-23 Lu?s Ferreira <contact@lsferreira.net>
+ +
+ + * d-demangle.c (dlang_Type): Validate MANGLED is nonnull.
+ + * testsuite/d-demangle-expected: New test.
+ +
+ +2021-09-23 Lu?s Ferreira <contact@lsferreira.net>
+ +
+ + * d-demangle.c (dlang_symbol_backref): Ensure strlen of
+ + string is less than length computed by dlang_number.
+ +
+ +2021-09-01 Iain Sandoe <iain@sandoe.co.uk>
+
+ * configure: Regenerate.
+ + * configure.ac: Do not search for sbrk on Darwin.
+ + * xmalloc.c: Do not declare sbrk unless it has been found
+ + by configure.
+ +
+ +2021-08-29 Iain Buclaw <ibuclaw@gdcproject.org>
+ +
+ + * d-demangle.c (dlang_identifier): Skip over fake parent manglings.
+ + * testsuite/d-demangle-expected: Add tests.
+ +
+ +2021-08-29 Iain Buclaw <ibuclaw@gdcproject.org>
+ +
+ + * d-demangle.c (dlang_parse_arrayliteral): Add 'info' parameter.
+ + (dlang_parse_assocarray): Likewise.
+ + (dlang_parse_structlit): Likewise.
+ + (dlang_value): Likewise. Handle function literal symbols.
+ + (dlang_template_args): Pass 'info' to dlang_value.
+ + * testsuite/d-demangle-expected: Add new test.
+ +
+ +2021-08-29 Iain Buclaw <ibuclaw@gdcproject.org>
+ +
+ + * d-demangle.c (dlang_attributes): Handle typeof(*null).
+ + (dlang_type): Likewise. Demangle 'n' as typeof(null).
+ + * testsuite/d-demangle-expected: Update tests.
+ +
+ +2021-08-23 Iain Sandoe <iain@sandoe.co.uk>
+ +
+ + * simple-object-mach-o.c (simple_object_mach_o_write_segment):
+ + Cast the first argument to set_32 as needed.
+
+ -2021-07-03 Nick Clifton <nickc@redhat.com>
+ +2021-08-18 Iain Sandoe <iain@sandoe.co.uk>
+
+ + * simple-object-mach-o.c (simple_object_mach_o_write_segment):
+ + Arrange to swap the LTO index tables where needed.
+ # Please enter the commit message for your changes. Lines starting
+
+2022-01-13 Andrew Burgess <aburgess@redhat.com>
+
+ gdb: don't use -Wmissing-prototypes with g++
+ This commit aims to not make use of -Wmissing-prototypes when
+ compiling with g++.
+
+ Use of -Wmissing-prototypes was added with this commit:
+
+ commit a0761e34f054767de6d6389929d27e9015fb299b
+ Date: Wed Mar 11 15:15:12 2020 -0400
+
+ gdb: enable -Wmissing-prototypes warning
+
+ Because clang can provide helpful warnings with this flag.
+ Unfortunately, g++ doesn't accept this flag, and will give this
+ warning:
+
+ cc1plus: warning: command line option ‘-Wmissing-prototypes’ is valid for C/ObjC but not for C++
+
+ In theory the fact that this flag is not supported should be detected
+ by the configure check in gdbsupport/warning.m4, but for users of
+ ccache, this check doesn't work due to a long standing ccache issue:
+
+ https://github.com/ccache/ccache/issues/738
+
+ The ccache problem is that -W... options are reordered on the command
+ line, and so -Wmissing-prototypes is seen before -Werror. Usually
+ this doesn't matter, but the above warning (about the flag not being
+ valid) is issued before the -Werror flag is processed, and so is not
+ fatal.
+
+ There have been two previous attempts to fix this that I'm aware of.
+ The first is:
+
+ https://sourceware.org/pipermail/gdb-patches/2021-September/182148.html
+
+ In this attempt, instead of just relying on a compile to check if a
+ flag is valid, the proposal was to both compile and link. As linking
+ doesn't go through ccache, we don't suffer from the argument
+ reordering problem, and the link phase will correctly fail when using
+ -Wmissing-prototypes with g++. The configure script will then disable
+ the use of this flag.
+
+ This approach was rejected, and the suggestion was to only add the
+ -Wmissing-prototypes flag if we are compiling with gcc.
+
+ The second attempt, attempts this approach, and can be found here:
+
+ https://sourceware.org/pipermail/gdb-patches/2021-November/183076.html
+
+ This attempt only adds the -Wmissing-prototypes flag is the value of
+ GCC is not 'yes'. This feels like it is doing the right thing,
+ unfortunately, the GCC flag is really a 'is gcc like' flag, not a
+ strict, is gcc check. As such, GCC is set to 'yes' for clang, which
+ would mean the flag was not included for clang or gcc. The entire
+ point of the original commit was to add this flag for clang, so
+ clearly the second attempt is not sufficient either.
+
+ In this new attempt I have added gdbsupport/compiler-type.m4, this
+ file defines AM_GDB_COMPILER_TYPE. This macro sets the variable
+ GDB_COMPILER_TYPE to either 'gcc', 'clang', or 'unknown'. In future
+ the list of values might be extended to cover other compilers, if this
+ is ever useful.
+
+ I've then modified gdbsupport/warning.m4 to only add the problematic
+ -Wmissing-prototypes flag if GDB_COMPILER_TYPE is not 'gcc'.
+
+ I've tested this with both gcc and clang and see the expected results,
+ gcc no longer attempts to use the -Wmissing-prototypes flag, while
+ clang continues to use it.
+
+ When compiling using ccache, I am no longer seeing the warning.
+
+2022-01-13 Andrew Burgess <aburgess@redhat.com>
+
+ gdb: add some extra debug information to attach_command
+ While working on another patch I wanted to add some extra debug
+ information to the attach_command function. This required me to add a
+ new function to convert the thread_info::state variable to a string.
+
+ The new debug might be useful to others, and the state to string
+ function might be useful in other locations, so I thought I'd merge
+ it.
+
+2022-01-13 Alan Modra <amodra@gmail.com>
+
+ Re: gas: add visibility support using GNU syntax on XCOFF
+ tc-ppc.c: In function 'ppc_comm':
+ tc-ppc.c:4560:40: error: 'visibility' may be used uninitialized in this function [-Werror=maybe-uninitialized]
+
+ With that fixed we hit lots of segfaults in the ld testsuite.
+
+ PR 22085
+ bfd/
+ * xcofflink.c (xcoff_link_input_bfd): Don't segfault on NULL
+ sym_hash.
+ gas/
+ * config/tc-ppc.c (ppc_comm): Init visibility.
+
+2022-01-13 Alan Modra <amodra@gmail.com>
+
+ dt-relr.exp --no-as-needed
+ Otherwise the very simple test may not be linked with libc.so at all,
+ and thus correctly have no version reference added. Causing failure
+ of the dt-relr-glibc-1b.so test.
+
+ * testsuite/ld-elf/dt-relr.exp: Link with --no-as-needed.
+
+2022-01-13 Alan Modra <amodra@gmail.com>
+
+ Correct .relr.dyn nocombreloc script
+ * scripttempl/elf.sc (.relr.dyn): Don't depend on $COMBRELOC.
+
+2022-01-13 Alan Modra <amodra@gmail.com>
+
+ testsuite supports_dt_relr
+ Tidy, and fix "FAIL: Build dt-relr-glibc-1b.so" on all non-x86
+ linux targets.
+
+ binutils/
+ * binutils-common.exp (supports_dt_relr): New proc.
+ ld/
+ * testsuite/config/default.exp (DT_RELR_LDFLAGS, NO_DT_RELR_LDFLAGS),
+ (DT_RELR_CC_LDFLAGS, NO_DT_RELR_CC_LDFLAGS): Use supports_dt_relr.
+ * testsuite/ld-elf/dt-relr.exp: Don't run unless supports_dt_relr.
+ * testsuite/ld-elf/dt-relr-1a.d: Likewise.
+ * testsuite/ld-elf/dt-relr-1b.d: Likewise.
+ * testsuite/ld-elf/dt-relr-1c.d: Likewise.
+ * testsuite/ld-elf/dt-relr-2a.d: Likewise.
+ * testsuite/ld-elf/dt-relr-2b.d: Likewise.
+ * testsuite/ld-elf/dt-relr-2c.d: Likewise.
+ * testsuite/ld-elf/dt-relr-2d.d: Likewise.
+ * testsuite/ld-elf/dt-relr-2e.d: Likewise.
+ * testsuite/ld-elf/dt-relr-2f.d: Likewise.
+ * testsuite/ld-elf/dt-relr-2g.d: Likewise.
+ * testsuite/ld-elf/dt-relr-2h.d: Likewise.
+ * testsuite/ld-elf/dt-relr-3a.d: Likewise.
+ * testsuite/ld-elf/dt-relr-3b.d: Likewise.
+
+2022-01-13 Alan Modra <amodra@gmail.com>
+
+ Don't use C++ comments in assembly
+ It might seem to work, but only if '/' is a start of comment char.
+
+ * testsuite/ld-elf/dt-relr-1.s: Use # for comment.
+ * testsuite/ld-elf/dt-relr-2.s: Likewise.
+ * testsuite/ld-elf/dt-relr-3.s: Likewise.
+
+2022-01-13 Alan Modra <amodra@gmail.com>
+
+ Move DT_RELR tag setting to elflink.c
+ This makes the code setting DT_RELR tags generally available. Many
+ targets will be able to use the defaults. Those that can't should set
+ up sh_entsize for .relr.dyn output section before reaching the dynamic
+ tag code in bfd_elf_final_link.
+
+ * elflink.c (bfd_elf_final_link): Set up DT_RELR tags and sh_entsize.
+ * elfxx-x86.c (_bfd_x86_elf_finish_dynamic_sections): Don't do any
+ of that here.
+
+2022-01-13 Alan Modra <amodra@gmail.com>
+
+ Re: Set SEC_ELF_REVERSE_COPY earlier
+ Let's not rely on .init/.fini having relocs for the size sanity check.
+ This is mainly to squash reports of "my fuzzed object made ld hang".
+
+2022-01-13 Tiezhu Yang <yangtiezhu@loongson.cn>
+
+ gdb: testsuite: make string[] type as char in gdb.base/charset.c
+ This reverts the commit ff656e2e1cb1 ("gdb: testsuite: fix failed
+ testcases in gdb.base/charset.exp").
+
+ The original test code has no problem. On an architecture where
+ char is signed, then both 'A' and ebcdic_us_string[7] will yield
+ -63, which makes the equality true. On an architecture where char
+ is unsigned, then both 'A' and ebcdic_us_string[7] will yield 193,
+ which also makes the equality true.
+
+ The test cases only failed on LoongArch. The default type of char
+ is signed char on LoongArch, like x86-64. But when use gdb print
+ command on LoongArch, the default type of char is unsigned char,
+ this is wrong, I will look into it later, sorry for that.
+
+ On LoongArch:
+
+ $ cat test_char.c
+ #include <stdio.h>
+
+ int main()
+ {
+ char c1 = 193;
+ unsigned char c2 = 193;
+
+ printf("%d\n", c1);
+ printf("%d\n", c1 == c2);
+
+ return 0;
+ }
+ $ gcc test_char.c -o test_char
+ $ ./test_char
+ -63
+ 0
+
+ (gdb) set target-charset EBCDIC-US
+ (gdb) print 'A'
+ $1 = 193 'A'
+ (gdb) print /c 'A'
+ $2 = 193 'A'
+ (gdb) print /u 'A'
+ $3 = 193
+ (gdb) print /d 'A'
+ $4 = -63
+ (gdb) print /x 'A'
+ $5 = 0xc1
+
+2022-01-13 GDB Administrator <gdbadmin@sourceware.org>
+
+ Automatic date update in version.in
+
+2022-01-12 Carl Love <cel@us.ibm.com>
+
+ gdb Power 9 add test for HW watchpoint support.
+ The Power 9 processor revision 2.2 has HW watchpoint support disabled due
+ to a HW bug. The support is fixed in Power 9 processor revision 2.3. This
+ patch add a test to lib/gdb.exp for Power to determine if the processor
+ supports HW watchpoints or not. If the Power processor doesn't support HW
+ watchpoints the proceedure skip_hw_watchpoint_tests will return 1 to
+ disable the various HW watchpoint tests.
+
+ The patch has been tested on Power 9, processor revesions 2.2 and 2.3. The
+ patch has also been tested on Power 10. No regression test failures were
+ found.
+
+2022-01-12 Andrew Burgess <aburgess@redhat.com>
+
+ gdb/python: add gdb.host_charset function
+ We already have gdb.target_charset and gdb.target_wide_charset. This
+ commit adds gdb.host_charset along the same lines.
+
+2022-01-12 Tankut Baris Aktemur <tankut.baris.aktemur@intel.com>
+
+ gdb/testsuite: fix gdb.python/py-events.exp for finding process id
+ When executed with --target_board=native-extended-gdbserver, the
+ gdb.python/py-events.exp test errors out with
+
+ ERROR: tcl error sourcing /path/to/gdb/testsuite/gdb.python/py-events.exp.
+ ERROR: can't read "process_id": no such variable
+ while executing
+ "lappend expected "ptid: \\($process_id, $process_id, 0\\)" "address: $addr""
+ (file "/path/to/gdb/testsuite/gdb.python/py-events.exp" line 103)
+ invoked from within
+ "source /path/to/gdb/testsuite/gdb.python/py-events.exp"
+ ("uplevel" body line 1)
+ invoked from within
+ "uplevel #0 source /path/to/gdb/testsuite/gdb.python/py-events.exp"
+ invoked from within
+ "catch "uplevel #0 source $test_file_name""
+
+ There are multiple problems around this:
+
+ 1. The process_id variable is not initialized to a default value.
+
+ 2. The test attempts to find the PID of the current thread, but the
+ regexp that it uses is not tailored for the output printed by the
+ remote target.
+
+ 3. The test uses "info threads" to find the current thread PID.
+ Using the "thread" command instead is simpler.
+
+ Fix these problems.
+
+2022-01-12 Tom Tromey <tromey@adacore.com>
+
+ Don't mention "serial" in target remote description
+ PR remote/9177 points out that "info files" mentions "serial" a couple
+ of times:
+
+ Remote serial target in gdb-specific protocol:
+ Debugging a target over a serial line.
+
+ However, often the remote target isn't really a serial connection.
+
+ It seems to me that this text could be a bit clearer; and furthermore
+ since "info files" prints the target's long description,
+ remote_target::files_info doesn't really add much and can simply be
+ removed.
+
+ Regression tested on x86-64 Fedora 34.
+
+ Bug: https://sourceware.org/bugzilla/show_bug.cgi?id=9177
+
+2022-01-12 H.J. Lu <hjl.tools@gmail.com>
+
+ ld: Add glibc dependency for DT_RELR
+ When DT_RELR is enabled, to avoid random run-time crash with older glibc
+ binaries without DT_RELR support, add a GLIBC_ABI_DT_RELR symbol version,
+ which is provided by glibc with DT_RELR support, dependency on the shared
+ C library if it provides a GLIBC_2.XX symbol version.
+
+ bfd/
+
+ * elflink.c (elf_link_add_dt_relr_dependency): New function.
+ (bfd_elf_size_dynamic_sections): Call
+ elf_link_add_dt_relr_dependency if DT_RELR is enabled.
+
+ ld/
+
+ * ld.texi: Mention GLIBC_ABI_DT_RELR in -z pack-relative-relocs
+ entry.
+ * testsuite/ld-elf/dt-relr-glibc-1.c: New file.
+ * testsuite/ld-elf/dt-relr-glibc-1a.rd: Likewise.
+ * testsuite/ld-elf/dt-relr-glibc-1b.rd: Likewise.
+ * testsuite/ld-elf/dt-relr.exp: Likewise.
+
+2022-01-12 H.J. Lu <hjl.tools@gmail.com>
+
+ ld: Add simple DT_RELR tests
+ * testsuite/ld-elf/dt-relr-1.s: New file.
+ * testsuite/ld-elf/dt-relr-1a.d: Likewise.
+ * testsuite/ld-elf/dt-relr-1b.d: Likewise.
+ * testsuite/ld-elf/dt-relr-1c.d: Likewise.
+ * testsuite/ld-elf/dt-relr-2.s: Likewise.
+ * testsuite/ld-elf/dt-relr-2a.d: Likewise.
+ * testsuite/ld-elf/dt-relr-2b.d: Likewise.
+ * testsuite/ld-elf/dt-relr-2c.d: Likewise.
+ * testsuite/ld-elf/dt-relr-2d.d: Likewise.
+ * testsuite/ld-elf/dt-relr-2e.d: Likewise.
+ * testsuite/ld-elf/dt-relr-2f.d: Likewise.
+ * testsuite/ld-elf/dt-relr-2g.d: Likewise.
+ * testsuite/ld-elf/dt-relr-2h.d: Likewise.
+ * testsuite/ld-elf/dt-relr-3.s: Likewise.
+ * testsuite/ld-elf/dt-relr-3a.d: Likewise.
+ * testsuite/ld-elf/dt-relr-3b.d: Likewise.
+ * testsuite/ld-i386/dt-relr-1.s: Likewise.
+ * testsuite/ld-i386/dt-relr-1a.d: Likewise.
+ * testsuite/ld-i386/dt-relr-1b.d: Likewise.
+ * testsuite/ld-x86-64/dt-relr-1a-x32.d: Likewise.
+ * testsuite/ld-x86-64/dt-relr-1a.d: Likewise.
+ * testsuite/ld-x86-64/dt-relr-1b-x32.d: Likewise.
+ * testsuite/ld-x86-64/dt-relr-1b.d: Likewise.
+ * testsuite/ld-x86-64/dt-relr-1.s: Likewise.
+ * testsuite/ld-i386/i386.exp: Run dt-relr-1a and dt-relr-1b.
+ * testsuite/ld-x86-64/x86-64.exp: Run dt-relr-1a, dt-relr-1a-x32
+ dt-relr-1b and dt-relr-1b-x32.
+
+2022-01-12 H.J. Lu <hjl.tools@gmail.com>
+
+ x86: Add DT_RELR support
+ DT_RELR is implemented with linker relaxation:
+
+ 1. During linker relaxation, we scan input relocations with the same
+ logic in relocate_section to determine if a relative relocation should
+ be generated and save the relative relocation candidate information for
+ sizing the DT_RELR section later after all symbols addresses can be
+ determined. For these relative relocations which can't be placed in
+ the DT_RELR section, they will be placed in the rela.dyn/rel.dyn
+ section.
+ 2. When DT_RELR is enabled, _bfd_elf_map_sections_to_segments calls a
+ backend function to size the DT_RELR section which will compute the
+ DT_RELR section size and tell ldelf_map_segments to layout sections
+ again when the DT_RELR section size has been increased.
+ 3. After regular symbol processing is finished, bfd_elf_final_link calls
+ a backend function to finish the DT_RELR section.
+
+ * elf32-i386.c (elf_i386_relocate_section): Don't generate
+ relative relocation when DT_RELR is enabled.
+ (elf_i386_finish_dynamic_symbol): Likewise.
+ * elf64-x86-64.c (elf_x86_64_relocate_section): Don't generate
+ relative relocation when DT_RELR is enabled.
+ (elf_x86_64_finish_dynamic_symbol): Likewise.
+ * elfxx-x86.c (_bfd_x86_elf_link_hash_table_create): Initialize
+ relative_r_type, relative_r_name, elf_append_reloc,
+ elf_write_addend and elf_write_addend_in_got.
+ (elf_x86_relative_reloc_record_add): New function.
+ (_bfd_x86_elf_link_relax_section): Likewise.
+ (elf64_dt_relr_bitmap_add): Likewise.
+ (elf32_dt_relr_bitmap_add): Likewise.
+ (_bfd_elf32_write_addend): Likewise.
+ (_bfd_elf64_write_addend): Likewise.
+ (elf_x86_size_or_finish_relative_reloc): Likewise.
+ (elf_x86_compute_dl_relr_bitmap): Likewise.
+ (elf_x86_write_dl_relr_bitmap): Likewise.
+ (elf_x86_relative_reloc_compare ): Likewise.
+ (_bfd_elf_x86_size_relative_relocs): Likewise.
+ (_bfd_elf_x86_finish_relative_relocs): Likewise.
+ (_bfd_x86_elf_size_dynamic_sections): Skip the .relr.dyn section.
+ (_bfd_x86_elf_finish_dynamic_sections): Convert 3 spare dynamic
+ tags to DT_RELR, DT_RELRSZ and for compact relative relocation.
+ * elfxx-x86.h (X86_64_GOT_TYPE_P): New.
+ (I386_GOT_TYPE_P): Likewise.
+ (X86_GOT_TYPE_P): Likewise.
+ (X86_64_RELATIVE_RELOC_TYPE_P): Likewise.
+ (I386_RELATIVE_RELOC_TYPE_P): Likewise.
+ (X86_RELATIVE_RELOC_TYPE_P): Likewise.
+ (X86_LOCAL_GOT_RELATIVE_RELOC_P): Likewise.
+ (I386_PCREL_TYPE_P): Likewise.
+ (X86_64_PCREL_TYPE_P): Likewise.
+ (X86_64_NEED_DYNAMIC_RELOC_TYPE_P): Rewrite.
+ (I386_NEED_DYNAMIC_RELOC_TYPE_P): Likewise.
+ (GENERATE_DYNAMIC_RELOCATION_P): Also check rel_from_abs.
+ (elf_x86_link_hash_entry): Add got_relative_reloc_done.
+ (elf_x86_relative_reloc_record): New.
+ (elf_x86_relative_reloc_data): Likewise.
+ (elf_dt_relr_bitmap): Likewise.
+ (elf_x86_link_hash_table): Add dt_relr_bitmap, relative_reloc,
+ unaligned_relative_reloc, relative_r_type, relative_r_name,
+ elf_append_reloc, elf_write_addend, elf_write_addend_in_got and
+ relative_reloc_done.
+ (elf_x86_relative_reloc_done): New.
+ (relative_reloc_packed): Likewise.
+ (_bfd_x86_elf_link_relax_section): Likewise.
+ (_bfd_elf_x86_size_relative_relocs): Likewise.
+ (_bfd_elf_x86_finish_relative_relocs): Likewise.
+ (_bfd_elf32_write_addend): Likewise.
+ (_bfd_elf64_write_addend): Likewise.
+ (bfd_elf32_bfd_relax_section): Likewise.
+ (bfd_elf64_bfd_relax_section): Likewise.
+ (elf_backend_size_relative_relocs): Likewise.
+ (elf_backend_finish_relative_relocs): Likewise.
+ (elf_x86_allocate_local_got_info): Also allocate
+ relative_reloc_done.
+
+2022-01-12 H.J. Lu <hjl.tools@gmail.com>
+
+ elf: Support DT_RELR in linker tests
+ Allow eabling and disabling DT_RELR in linker tests. Disable DT_RELR in
+ linker tests which don't expect DT_RELR in linker outputs.
+
+ binutils/
+
+ * testsuite/lib/binutils-common.exp (run_dump_test): Make
+ DT_RELR_LDFLAGS and NO_DT_RELR_LDFLAGS global.
+
+ ld/
+
+ * testsuite/config/default.exp (DT_RELR_LDFLAGS): New.
+ (DT_RELR_CC_LDFLAGS): Likewise.
+ (NO_DT_RELR_LDFLAGS): Likewise.
+ (NO_DT_RELR_CC_LDFLAGS): Likewise.
+ * testsuite/ld-elf/shared.exp: Pass $NO_DT_RELR_LDFLAGS to
+ linker for some tests.
+ * testsuite/ld-i386/export-class.exp: Likewise.
+ * testsuite/ld-i386/i386.exp: Likewise.
+ * testsuite/ld-i386/ibt-plt-2a.d: Pass $NO_DT_RELR_LDFLAGS to
+ linker.
+ * testsuite/ld-i386/ibt-plt-3a.d: Likewise.
+ * testsuite/ld-i386/ibt-plt-3c.d: Likewise.
+ * testsuite/ld-i386/pr26869.d: Likewise.
+ * testsuite/ld-i386/report-reloc-1.d: Likewise.
+ * testsuite/ld-ifunc/ifunc-2-i386-now.d: Likewise.
+ * testsuite/ld-ifunc/ifunc-2-local-i386-now.d: Likewise.
+ * testsuite/ld-ifunc/ifunc-2-local-x86-64-now.d: Likewise.
+ * testsuite/ld-ifunc/ifunc-2-x86-64-now.d: Likewise.
+ * testsuite/ld-ifunc/pr17154-x86-64.d: Likewise.
+ * testsuite/ld-x86-64/bnd-branch-1-now.d: Likewise.
+ * testsuite/ld-x86-64/bnd-ifunc-1-now.d: Likewise.
+ * testsuite/ld-x86-64/bnd-ifunc-2-now.d: Likewise.
+ * testsuite/ld-x86-64/bnd-ifunc-2.d: Likewise.
+ * testsuite/ld-x86-64/bnd-plt-1-now.d: Likewise.
+ * testsuite/ld-x86-64/bnd-plt-1.d: Likewise.
+ * testsuite/ld-x86-64/ibt-plt-2a-x32.d: Likewise.
+ * testsuite/ld-x86-64/ibt-plt-2a.d: Likewise.
+ * testsuite/ld-x86-64/ibt-plt-3a-x32.d: Likewise.
+ * testsuite/ld-x86-64/ibt-plt-3a.d: Likewise.
+ * testsuite/ld-x86-64/ilp32-4.d: Likewise.
+ * testsuite/ld-x86-64/load1c.d: Likewise.
+ * testsuite/ld-x86-64/load1d.d: Likewise.
+ * testsuite/ld-x86-64/pr13082-2b.d: Likewise.
+ * testsuite/ld-x86-64/pr14207.d: Likewise.
+ * testsuite/ld-x86-64/pr18176.d: Likewise.
+ * testsuite/ld-x86-64/pr19162.d: Likewise.
+ * testsuite/ld-x86-64/pr19636-2d.d: Likewise.
+ * testsuite/ld-x86-64/pr19636-2l.d: Likewise.
+ * testsuite/ld-x86-64/pr20253-1d.d: Likewise.
+ * testsuite/ld-x86-64/pr20253-1f.d: Likewise.
+ * testsuite/ld-x86-64/pr20253-1j.d: Likewise.
+ * testsuite/ld-x86-64/pr20253-1l.d: Likewise.
+ * testsuite/ld-x86-64/report-reloc-1-x32.d: Likewise.
+ * testsuite/ld-x86-64/report-reloc-1.d: Likewise.
+ * testsuite/ld-x86-64/export-class.exp (x86_64_export_class_test):
+ Pass $NO_DT_RELR_LDFLAGS to linker.
+ * testsuite/ld-x86-64/x86-64.exp: Pass $NO_DT_RELR_LDFLAGS to
+ linker for some tests.
+
+2022-01-12 H.J. Lu <hjl.tools@gmail.com>
+
+ elf: Add size_relative_relocs and finish_relative_relocs
+ On some targets, the DT_RELR section size can be computed only after all
+ symbols addresses can be determined. Set the preliminary DT_RELR section
+ size before mapping sections to segments and set the final DT_RELR section
+ size after regular symbol processing is done.
+
+ * elf-bfd.h (elf_backend_data): Add size_relative_relocs and
+ finish_relative_relocs.
+ * elf.c (_bfd_elf_map_sections_to_segments): Call
+ size_relative_relocs if DT_RELR is enabled.
+ * elflink.c (bfd_elf_final_link): Call finish_relative_relocs
+ after regular symbol processing is finished if DT_RELR is enabled.
+ * elfxx-target.h (elf_backend_size_relative_relocs): New.
+ (elf_backend_finish_relative_relocs): Likewise.
+ (elfNN_bed): Add elf_backend_size_relative_relocs and
+ elf_backend_finish_relative_relocs.
+
+2022-01-12 H.J. Lu <hjl.tools@gmail.com>
+
+ ld: Initial DT_RELR support
+ Add a -z pack-relative-relocs option to enable DT_RELR and create a
+ relr.dyn section for DT_RELR. DT_RELR is implemented with the linker
+ relaxation infrastructure, but it doesn't require the --relax option
+ enabled. -z pack-relative-relocs implies -z combreloc. -z nocombreloc
+ implies -z nopack-relative-relocs.
+
+ -z pack-relative-relocs is chosen over the similar option in lld,
+ --pack-dyn-relocs=relr, to implement a glibc binary lockout mechanism
+ with a special glibc version symbol, to avoid random crashes of DT_RELR
+ binaries with the existing glibc binaries.
+
+ bfd/
+
+ * elf-bfd.h (elf_link_hash_table): Add srelrdyn.
+ * elflink.c (_bfd_elf_link_create_dynamic_sections): Create a
+ .relr.dyn section for DT_RELR.
+
+ include/
+
+ * bfdlink.h (bfd_link_info): Add enable_dt_relr.
+
+ ld/
+
+ * News: Mention -z pack-relative-relocs and
+ -z nopack-relative-relocs.
+ * ld.texi: Document -z pack-relative-relocs and
+ -z nopack-relative-relocs.
+ * ldelf.c (ldelf_after_parse): Disable DT_RELR if not building
+ PIE nor shared library. Add 3 spare dynamic tags for DT_RELR,
+ DT_RELRSZ and DT_RELRENT.
+ * ldlang.c (lang_relax_sections): Also enable relaxation if
+ DT_RELR is enabled.
+ * emulparams/elf32_x86_64.sh: Source dt-relr.sh.
+ * emulparams/elf_i386.sh: Likewise.
+ * emulparams/elf_x86_64.sh: Likewise.
+ * emulparams/dt-relr.sh: New file.
+ * scripttempl/elf.sc: Support .relr.dyn.
+
+2022-01-12 H.J. Lu <hjl.tools@gmail.com>
+
+ elf: Pass need_layout to _bfd_elf_map_sections_to_segments
+ On some targets, the DT_RELR section size can be computed only after all
+ symbols addresses can be determined. Update ldelf_map_segments to pass
+ need_layout to _bfd_elf_map_sections_to_segments which will size DT_RELR
+ section and set need_layout to true if the DT_RELR section size is changed.
+
+ bfd/
+
+ * elf-bfd.h (_bfd_elf_map_sections_to_segments): Add a bool
+ pointer argument.
+ * elf.c (_bfd_elf_map_sections_to_segments): Add a bool pointer
+ argument to indicate if section layout needs update.
+ (assign_file_positions_for_load_sections): Pass NULL to
+ _bfd_elf_map_sections_to_segments.
+ * elflink.c (_bfd_elf_strip_zero_sized_dynamic_sections): Pass
+ NULL to _bfd_elf_map_sections_to_segments.
+
+ ld/
+
+ * ldelfgen.c (ldelf_map_segments): Pass &need_layout to
+ _bfd_elf_map_sections_to_segments.
+
+2022-01-12 H.J. Lu <hjl.tools@gmail.com>
+
+ elf: Add .relr.dyn to special_sections_r
+ * elf.c (special_sections_r): Add .relr.dyn.
+
+2022-01-12 Andrew Burgess <aburgess@redhat.com>
+
+ gdb: add 'maint set/show gnu-source-highlight enabled' command
+ In a later commit I want to address an issue with the Python pygments
+ based code styling solution. As this approach is only used when the
+ GNU Source Highlight library is not available, testing bugs in this
+ area can be annoying, as it requires GDB to be rebuilt with use of GNU
+ Source Highlight disabled.
+
+ This commit adds a pair of new maintenance commands:
+
+ maintenance set gnu-source-highlight enabled on|off
+ maintenance show gnu-source-highlight enabled
+
+ these commands can be used to disable use of the GNU Source Highlight
+ library, allowing me, in a later commit, to easily test bugs that
+ would otherwise be masked by GNU Source Highlight being used.
+
+ I made this a maintenance command, rather than a general purpose
+ command, as it didn't seem like this was something a general user
+ would need to adjust. We can always convert the maintenance command
+ to a general command later if needed.
+
+ There's no test for this here, but this feature will be used in a
+ later commit.
+
+2022-01-12 Andrew Burgess <aburgess@redhat.com>
+
+ gdb: erase items from the source_cache::m_offset_cache
+ The source_cache class has two member variables m_source_map, which
+ stores the file contents, and m_offset_cache, which stores offsets
+ into the file contents.
+
+ As source files are read the contents of the file, as well as the
+ offset data, are stored in the cache using these two member variables.
+
+ Whenever GDB needs either the files contents, or the offset data,
+ source_cache::ensure is called. This function looks for the file in
+ m_source_map, and if it's found then this implies the file is also in
+ m_offset_cache, and we're done.
+
+ If the file is not in m_source_map then GDB calls
+ source_cache::get_plain_source_lines to open the file and read its
+ contents. ::get_plain_source_lines also calculates the offset data,
+ which is then inserted into m_offset_cache.
+
+ Back in ::ensure, the file contents are added into m_source_map. And
+ finally, if m_source_map contains more than MAX_ENTRIES, an entry is
+ removed from m_source_map.
+
+ The problem is entries are not removed from m_offset_cache at the same
+ time.
+
+ This means that if a program contains enough source files, GDB will
+ hold at most MAX_ENTRIES cached source file contents, but can contain
+ offsets data for every source file.
+
+ Now, the offsets data is going to be smaller than the cached file
+ contents, so maybe there's no harm here. But, when we reload the file
+ contents we always recalculate the offsets data. And, when we
+ ::get_line_charpos asking for offset data we still call ::ensure which
+ will ends up loading and caching the file contents.
+
+ So, given the current code does the work of reloading the offset data
+ anyway, we may as well save memory by capping m_offset_cache to
+ MAX_ENTRIES just like we do m_source_map.
+
+ That's what this commit does.
+
+ There should be no user visible changes after this commit, except for
+ ever so slightly lower memory usage in some cases.
+
+2022-01-12 Andrew Burgess <aburgess@redhat.com>
+
+ gdb: new 'maint flush source-cache' command
+ This commit adds a new 'maint flush source-cache' command, this
+ flushes the cache of source file contents.
+
+ After flushing GDB is forced to reread source files the next time any
+ source lines are to be displayed.
+
+ I've added a test for this new feature. The test is a little weird,
+ in that it modifies a source file after compilation, and makes use of
+ the cache flush so that the changes show up when listing the source
+ file. I'm not sure when such a situation would ever crop up in real
+ life, but maybe we can imagine such cases.
+
+ In reality, this command is useful for testing the syntax highlighting
+ within GDB, we can adjust the syntax highlighting settings, flush the
+ cache, and then get the file contents re-highlighted using the new
+ settings.
+
+2022-01-12 Andrew Burgess <aburgess@redhat.com>
+
+ gdb: rename lin-lwp to linux-nat in set/show debug
+ Rename 'set debug lin-lwp' to 'set debug linux-nat' and 'show debug
+ lin-lwp' to 'show debug linux-nat'.
+
+ I've updated the documentation and help text to match, as well as
+ making it clear that the debug that is coming out relates to all
+ aspects of Linux native inferior support, not just the LWP aspect of
+ it.
+
+ The boundary between general "native" target debug, and the lwp
+ specific part of that debug was always a little blurry, but the actual
+ debug variable inside GDB is debug_linux_nat, and the print routine
+ linux_nat_debug_printf, is used throughout the linux-nat.c file, not
+ just for lwp related debug, so the new name seems to make more sense.
+
+2022-01-12 Clément Chigot <clement.chigot@atos.net>
+
+ ld: add hidden and internal visibility support for XCOFF
+ This patch adds a primary support for hidden and internal visibility in
+ GNU linker for XCOFF format.
+ The protected visibility isn't yet supported.
+
+ PR 22085
+
+ bfd/ChangeLog:
+
+ * xcofflink.c (xcoff_dynamic_definition_p): Add hidden
+ and internal visibility support.
+ (xcoff_link_add_symbols): Likewise.
+ (xcoff_auto_export_p): Likewise.
+ (bfd_xcoff_export_symbol): Likewise.
+ (xcoff_link_input_bfd): Likewise.
+
+ ld/ChangeLog:
+
+ * testsuite/ld-vsb/main.c: Adapt for XCOFF.
+ * testsuite/ld-vsb/sh1.c: Likewse.
+ * testsuite/ld-vsb/vsb.exp: Likewise.
+ * testsuite/ld-vsb/visibility-1-xcoff-32.d: New test.
+ * testsuite/ld-vsb/visibility-1-xcoff-64.d: New test.
+ * testsuite/ld-vsb/visibility-2-xcoff-32.d: New test.
+ * testsuite/ld-vsb/visibility-2-xcoff-64.d: New test.
+ * testsuite/ld-vsb/xcoffvsb.dat: New test.
+
+2022-01-12 Clément Chigot <clement.chigot@atos.net>
+
+ ld/testsuite: prepare ld-elfvsb to support XCOFF
+ A following patch will add visibility support in ld for XCOFF. Thus,
+ ld-elfvsb is renamed ld-vsb and a suffix is added to files targeting only
+ ELF format.
+
+ ld/ChangeLog:
+
+ * testsuite/ld-elfvsb: rename as ld-vsb.
+ * testsuite/ld-elfvsb/hidden0.d: move to ld-vsb and rename with
+ suffix -elf.d.
+ * testsuite/ld-elfvsb/hidden1.d: Likewise.
+ * testsuite/ld-elfvsb/hidden2.d: Likewise.
+ * testsuite/ld-elfvsb/internal0.d: Likewise.
+ * testsuite/ld-elfvsb/internal1.d: Likewise.
+ * testsuite/ld-elfvsb/protected0.d: Likewise.
+ * testsuite/ld-elfvsb/protected1.d: Likewise.
+
+2022-01-12 Clément Chigot <clement.chigot@atos.net>
+
+ gas: add visibility support using GNU syntax on XCOFF
+ In order to ease port of GNU assembly code and especially ld testsuite,
+ this patch allows XCOFF to accept the usual GNU syntax for visibility.
+
+ PR 22085
+
+ gas/ChangeLog:
+
+ * config/tc-ppc.c (ppc_GNU_visibility): New function.
+ * testsuite/gas/ppc/aix.exp: Add new tests.
+ * testsuite/gas/ppc/xcoff-visibility-2-32.d: New test.
+ * testsuite/gas/ppc/xcoff-visibility-2-64.d: New test.
+ * testsuite/gas/ppc/xcoff-visibility-2.s: New test.
+
+2022-01-12 Clément Chigot <clement.chigot@atos.net>
+
+ gas: add visibility support for XCOFF
+ XCOFF assembly defines the visibility using an additional argument
+ on several pseudo-ops: .globl, .weak, .extern and .comm.
+ This implies that .globl and .weak syntax is different than the
+ usual GNU syntax. But we want to provide compatibility with AIX
+ assembler, especially because GCC is generating the visibility
+ using this XCOFF syntax.
+
+ PR 22085
+
+ bfd/ChangeLog:
+
+ * coffcode.h (coff_write_object_contents): Change XCOFF header
+ vstamp field to 2.
+ * coffgen.c (coff_print_symbol): Increase the size for n_type.
+
+ gas/ChangeLog:
+
+ * config/tc-ppc.c (ppc_xcoff_get_visibility): New function.
+ (ppc_globl): New function.
+ (ppc_weak): New function.
+ (ppc_comm): Add visibility field support.
+ (ppc_extern): Likewise.
+ * testsuite/gas/all/cofftag.d: Adjust to new n_type size
+ providing by objdump.
+ * testsuite/gas/ppc/test1xcoff32.d: Likewise.
+ * testsuite/gas/ppc/aix.exp: Add new tests.
+ * testsuite/gas/ppc/xcoff-visibility-1-32.d: New test.
+ * testsuite/gas/ppc/xcoff-visibility-1-64.d: New test.
+ * testsuite/gas/ppc/xcoff-visibility-1.s: New test.
+
+ include/ChangeLog:
+
+ * coff/internal.h (SYM_V_INTERNAL, SYM_V_HIDDEN,
+ SYM_V_PROTECTED, SYM_V_EXPORTED, SYM_V_MASK): New defines.
+ * coff/xcoff.h (struct xcoff_link_hash_entry): Add visibility
+ field.
+
+ ld/ChangeLog:
+
+ * testsuite/ld-pe/pr19803.d: Adjust to new n_type size
+ providing by objdump.
+
+2022-01-12 Hans-Peter Nilsson <hp@axis.com>
+
+ objdump, readelf: Emit "CU:" format only when wide output is requested
+ As pre-approved by Alan in
+ https://sourceware.org/pipermail/binutils/2021-September/118019.html
+ and I believe people have run into getting testsuite failures for
+ test-environments with "long" directory names, at least once more
+ since that time. Enough. I grepped the gas, binutils and ld
+ testsuites for "CU:" to catch target-specific occurrences, but I
+ noticed none. I chose to remove "CU:" on the objdump tests instead of
+ changing options to get the wide format, so as to keep the name of the
+ test consistent with actual options; but added it to the readelf
+ options for the gas test as I believe the "CU:" format is preferable.
+
+ Tested for cris-elf and native x86_64-pc-linux-gnu.
+
+ binutils:
+ * dwarf.c (display_debug_lines_decoded): Don't check the
+ string length of the directory, instead emit the "CU: dir/name"
+ format only if wide output is requested.
+ * testsuite/binutils-all/dw5.W, testsuite/binutils-all/objdump.WL:
+ Adjust accordingly.
+
+ gas:
+ * testsuite/gas/elf/dwarf-5-loc0.d: Add -W to readelf options.
+
+2022-01-12 Alan Modra <amodra@gmail.com>
+
+ Set SEC_ELF_REVERSE_COPY earlier
+ For the sake of DT_RELR.
+
+ bfd/
+ * elflink.c (elf_link_input_bfd): Don't set SEC_ELF_REVERSE_COPY
+ here. Move sanity checks to reverse copying code.
+ ld/
+ * ldlang.c (lang_add_section): Set SEC_ELF_REVERSE_COPY for
+ .ctors/.dtors in .init_array/.fini_array.
+
+2022-01-12 Tiezhu Yang <yangtiezhu@loongson.cn>
+
+ gdb: testsuite: fix wrong comment in gdb.base/charset.c
+ In gdb/testsuite/gdb.base/charset.c, use "IBM1047" instead of "EBCDIC"
+ to fix the wrong comment.
+
+2022-01-12 Tiezhu Yang <yangtiezhu@loongson.cn>
+
+ gdb: testsuite: fix failed testcases in gdb.base/charset.exp
+ In gdb/testsuite/gdb.base/charset.c, the last argument is greater than 127
+ when call fill_run() in EBCDIC-US and IBM1047, but the type of string[] is
+ char, this will change the value due to sign extension.
+
+ For example, ebcdic_us_string[7] will be -63 instead of the original 193 in
+ EBCDIC-US.
+
+ Make the type of string[] as unsigned char to fix the following six failed
+ testcases:
+
+ $ grep FAIL gdb/testsuite/gdb.sum
+ FAIL: gdb.base/charset.exp: check value of parsed character literal in EBCDIC-US
+ FAIL: gdb.base/charset.exp: check value of parsed string literal in EBCDIC-US
+ FAIL: gdb.base/charset.exp: check value of escape that doesn't exist in EBCDIC-US
+ FAIL: gdb.base/charset.exp: check value of parsed character literal in IBM1047
+ FAIL: gdb.base/charset.exp: check value of parsed string literal in IBM1047
+ FAIL: gdb.base/charset.exp: check value of escape that doesn't exist in IBM1047
+
+2022-01-12 GDB Administrator <gdbadmin@sourceware.org>
+
+ Automatic date update in version.in
+
+2022-01-11 Fangrui Song <maskray@google.com>
+
+ ar: Add --thin for creating thin archives
+ In many ar implementations (FreeBSD, elfutils, etc), -T has the X/Open
+ System Interface specified semantics. Therefore -T for thin archives is
+ not recommended for portability. -T is deprecated without diagnostics.
+
+ PR binutils/28759
+ * ar.c (long_options): Add --thin.
+ (usage) Add --thin. Deprecate -T without diagnostics.
+ * doc/binutils.texi: Add doc.
+ * NEWS: Mention --thin.
+ * binutils/testsuite/binutils-all/ar.exp: Add tests.
+
+2022-01-11 Martin Storsj <martin@martin.st>
+
+ Fix multiple problems with DLL generation.
+ ld * pe-dll.c (make_head): Prefix the symbol name with the dll name.
+ (make_tail, make_one, make_singleton_name_thunk): Likewise.
+ (make_import_fixup_entry, make_runtime_pseudo_reloc): Likewise.
+ (pe_create_runtime_relocator_reference): Likewise.
+ (pe_dll_generate_implib): Set dll_symname_len.
+ (pe_process_import_defs): Likewise.
+
+ binutils
+ * dlltool.c (main): If a prefix has not been provided, attempt to
+ use a deterministic one based upon the dll name.
+
+2022-01-11 Jan Beulich <jbeulich@suse.com>
+
+ gas/doc: mention quoted symbol names
+
+2022-01-11 Andrew Burgess <aburgess@redhat.com>
+
+ gdbsupport: regenerate Makefile.in
+ I had cause to regenerate gdbsupport/Makefile.in, and noticed some
+ unexpected changes in the copyright header dates.
+
+ I suspect that this was caused by the end of year date range update
+ process.
+
+ The Makefile.in contains two date ranges. The first range appears to
+ be the date range for the version of automake being used, that is the
+ range runs up to 2017 only, when automake 1.15.1 was released.
+
+ The second date range in Makefile.in represents the date range for the
+ generated file, and so, now runs up to 2022.
+
+ Anyway, this is the result of running autoreconf (using automake
+ 1.15.1) in the gdbsupport directory.
+
+2022-01-11 GDB Administrator <gdbadmin@sourceware.org>
+
+ Automatic date update in version.in
+
+2022-01-10 Clément Chigot <clement.chigot@atos.net>
+
+ XCOFF: add support for TLS relocations on hidden symbols
+ This patch adds support for TLS relocation targeting C_HIDEXT symbols.
+ In gas, TLS relocations, except R_TLSM and R_TLMSL, must keep the value
+ of their target symbol.
+ In ld, it simply ensures that internal TLS symbols are added to the
+ linker hash table for xcoff_reloc_type_tls.
+
+ It also improves the tests made by both.
+
+ bfd/ChangeLog:
+
+ * coff-rs6000.c (xcoff_howto_table): Fix name of R_TLSML.
+ (xcoff_reloc_type_tls): Replace the error when h is NULL by
+ an assert.
+ (xcoff_complain_overflow_unsigned_func): Adjust comments.
+ * coff64-rs6000.c (xcoff64_howto_table): Fix name of R_TLSML.
+ * xcofflink.c (xcoff_link_add_symbols_to_hash_table): New
+ function.
+ (xcoff_link_add_symbols): Add C_HIDEXT TLS symbols to the linker
+ hash table.
+
+ gas/ChangeLog:
+
+ * config/tc-ppc.c (md_apply_fix): Enable support for TLS
+ relocation over internal symbols.
+ * testsuite/gas/ppc/aix.exp: Replace xcoff-tlms by xcoff-tls.
+ * testsuite/gas/ppc/xcoff-tlsm-32.d: Removed.
+ * testsuite/gas/ppc/xcoff-tlsm-64.d: Removed.
+ * testsuite/gas/ppc/xcoff-tlsm.s: Removed.
+ * testsuite/gas/ppc/xcoff-tls-32.d: New test.
+ * testsuite/gas/ppc/xcoff-tls-64.d: New test.
+ * testsuite/gas/ppc/xcoff-tls.s: New test.
+
+ ld/ChangeLog:
+
+ * testsuite/ld-powerpc/aix52.exp: Improve aix-tls-reloc test.
+ * testsuite/ld-powerpc/aix-tls-reloc.s: Likewise.
+ * testsuite/ld-powerpc/aix-tls-reloc-32.d: Removed.
+ * testsuite/ld-powerpc/aix-tls-reloc-64.d: Removed.
+ * testsuite/ld-powerpc/aix-tls-reloc-32.dd: New test.
+ * testsuite/ld-powerpc/aix-tls-reloc-32.dt: New test.
+ * testsuite/ld-powerpc/aix-tls-reloc-64.dd: New test.
+ * testsuite/ld-powerpc/aix-tls-reloc-64.dt: New test.
+
+2022-01-10 Tiezhu Yang <yangtiezhu@loongson.cn>
+
+ gdb: add Tiezhu Yang to MAINTAINERS
+
+2022-01-10 Tom Tromey <tom@tromey.com>
+
+ Reduce use of unfiltered output in Darwin code
+ The Darwin code uses unfiltered output liberally. This patch changes
+ this code to send some output to gdb_stdlog (in some cases via the use
+ of debug_prefixed_printf_cond_nofunc), or to gdb_stderr, or to simply
+ switch to filtered output.
+
+ Note that I didn't switch inferior_debug to use
+ debug_prefixed_printf_cond_nofunc, because that would affect the
+ output by removing the information about the inferior. I wasn't sure
+ if this was important or not, so I left it in.
+
+ v2 of this patch uses warning rather than prints to gdb_stderr, and
+ removes some trailing whitespace.
+
+ I can't compile this patch, so it's "best effort".
+
+2022-01-10 GDB Administrator <gdbadmin@sourceware.org>
+
+ Automatic date update in version.in
+
+2022-01-09 GDB Administrator <gdbadmin@sourceware.org>
+
+ Automatic date update in version.in
+
+2022-01-08 Andrew Burgess <aburgess@redhat.com>
+
+ gdb/hurd: handle inferiors exiting
+ While testing on GNU/Hurd (i386) I noticed that GDB crashes when an
+ inferior exits, with this error:
+
+ inferior.c:293: internal-error: inferior* find_inferior_pid(process_stratum_target*, int): Assertion `pid != 0' failed.
+
+ The problem appears to be in gnu_nat_target::wait.
+
+ We always set inferior_ptid to null_ptid before calling target_wait,
+ this has been the case since the multi-target changes were made to GDB
+ in commit:
+
+ commit 5b6d1e4fa4fc6827c7b3f0e99ff120dfa14d65d2
+ Date: Fri Jan 10 20:06:08 2020 +0000
+
+ Multi-target support
+
+ With follow up changes in commit:
+
+ commit 24ed6739b699f329c2c45aedee5f8c7d2f54e493
+ Date: Thu Jan 30 14:35:40 2020 +0000
+
+ gdb/remote: Restore support for 'S' stop reply packet
+
+ Unfortunately, the GNU/Hurd target is still relying on the value of
+ inferior_ptid in the case where an inferior exits - we return the
+ value of inferior_ptid as the pid of the process that exited. This
+ was fine in the single target world, where inferior_ptid identified
+ the one running inferior, but this is no longer good enough.
+
+ Instead, we should return a ptid containing the pid of the process
+ that exited, as obtained from the wait event, and this is what this
+ commit does.
+
+ I've not run the full testsuite on GNU/Hurd as there appear to be lots
+ of other issues with this target that makes running the full testsuite
+ very painful, but I think this looks like a small easy improvement.
+
+2022-01-08 Tom Tromey <tom@tromey.com>
+
+ Add explicit check for nullptr to target_announce_attach
+ Lancelot pointed out that target_announce_attach was missing an
+ explicit check against nullptr. This patch adds it.
+
+2022-01-08 Hannes Domani <ssbssa@yahoo.de>
+
+ Add _sigsys info to siginfo struct
+ This patch adds information about _sigsys structure from newer
+ kernels, so that $_siginfo decoding can show information about
+ _sigsys, making it easier for developers to debug seccomp failures.
+ Requested in PR gdb/24283.
+
+ Bug: https://sourceware.org/bugzilla/show_bug.cgi?id=24283
+
+2022-01-08 Tiezhu Yang <yangtiezhu@loongson.cn>
+
+ gdb: testsuite: show print array-indexes after set in arrayidx.exp
+ Add "show print array-indexes" testcases after set print array-indexes
+ to off or on.
+
+ Without this patch:
+
+ PASS: gdb.base/arrayidx.exp: set print array-indexes to off
+ PASS: gdb.base/arrayidx.exp: print array with array-indexes off
+ PASS: gdb.base/arrayidx.exp: set print array-indexes to on
+ PASS: gdb.base/arrayidx.exp: print array with array-indexes on
+
+ With this patch:
+
+ PASS: gdb.base/arrayidx.exp: set print array-indexes to off
+ PASS: gdb.base/arrayidx.exp: show print array-indexes is off
+ PASS: gdb.base/arrayidx.exp: print array with array-indexes off
+ PASS: gdb.base/arrayidx.exp: set print array-indexes to on
+ PASS: gdb.base/arrayidx.exp: show print array-indexes is on
+ PASS: gdb.base/arrayidx.exp: print array with array-indexes on
+
+2022-01-08 H.J. Lu <hjl.tools@gmail.com>
+
+ ld: Extract _bfd_elf_link_iterate_on_relocs
+ DT_RELR encodes consecutive R_*_RELATIVE relocations in GOT (the global
+ offset table) and data sections in a compact format:
+
+ https://groups.google.com/g/generic-abi/c/bX460iggiKg
+
+ On some targets, R_*_RELATIVE relocations are counted and the GOT offsets
+ are allocated when setting the dynamic section sizes after seeing all
+ relocations. R_*_RELATIVE relocations are generated while relocating
+ sections after section layout has been finalized.
+
+ To prepare for DT_RELR implementation on these targets, extract
+ _bfd_elf_link_iterate_on_relocs from _bfd_elf_link_check_relocs so
+ that a backend can scan relocations in elf_backend_always_size_sections
+
+ For x86 targets, the old check_relocs is renamed to scan_relocs and a
+ new check_relocs is added to chek input sections and create dynamic
+ relocation sections so that they will be mapped to output sections.
+ scan_relocs is now called from elf_backend_always_size_sections.
+
+ Since relocations are scanned after __start, __stop, .startof. and
+ .sizeof. symbols have been finalized on x86, __[start|stop]_SECNAME for
+ --gc-sections -z start-stop-gc are now zero when all SECNAME sections
+ been garbage collected. This is no need for elf_x86_start_stop_gc_p.
+
+ bfd/
+
+ * elf-bfd.h (_bfd_elf_link_iterate_on_relocs): New.
+ * elf32-i386.c (elf_i386_convert_load_reloc): Don't call
+ elf_x86_start_stop_gc_p.
+ (elf_i386_check_relocs): Renamed to ...
+ (elf_i386_scan_relocs): This. Don't call
+ _bfd_elf_make_dynamic_reloc_section.
+ (elf_i386_always_size_sections): New.
+ (elf_backend_check_relocs): Removed.
+ (elf_backend_always_size_sections): New.
+ * elf64-x86-64.c (elf_x86_64_convert_load_reloc): Don't call
+ elf_x86_start_stop_gc_p.
+ (elf_x86_64_check_relocs): Renamed to ...
+ (elf_x86_64_scan_relocs): This. Don't call
+ _bfd_elf_make_dynamic_reloc_section.
+ (elf_x86_64_always_size_sections): New.
+ (elf_backend_check_relocs): Removed.
+ (elf_backend_always_size_sections): New.
+ * elflink.c (elf_link_check_or_scan_relocs):
+ New. Extracted from _bfd_elf_link_check_relocs.
+ (_bfd_elf_link_check_relocs): Call elf_link_check_or_scan_relocs.
+ * elfxx-x86.c (_bfd_x86_elf_check_relocs): New.
+ * elfxx-x86.h (X86_64_NEED_DYNAMIC_RELOC_TYPE_P): New.
+ (I386_NEED_DYNAMIC_RELOC_TYPE_P): Likewise.
+ (X86_NEED_DYNAMIC_RELOC_TYPE_P): Likewise.
+ (_bfd_x86_elf_check_relocs): Likewise.
+ (elf_backend_check_relocs): Likewise.
+ (elf_backend_always_size_sections): Removed.
+ (elf_x86_start_stop_gc_p): Likewise.
+
+ ld/
+
+ * testsuite/ld-i386/pr27491-1a.d: Updated.
+ * testsuite/ld-x86-64/pr27491-1a.d: Likewise.
+
+2022-01-08 GDB Administrator <gdbadmin@sourceware.org>
+
+ Automatic date update in version.in
+
+2022-01-07 Lancelot SIX <lsix@lancelotsix.com>
+
+ gdb/testsuite: Remove duplicates from gdb.mi/mi-catch-load.exp
+ When I run the testsuite, I have:
+
+ Running .../gdb/testsuite/gdb.mi/mi-catch-load.exp ...
+ DUPLICATE: gdb.mi/mi-catch-load.exp: breakpoint at main
+ DUPLICATE: gdb.mi/mi-catch-load.exp: mi runto main
+
+ Fix by grouping the various phases in with_test_prefix blocks. Since
+ the tests now have a prefix, remove the manually written prefixes in
+ testnames.
+
+ Also change some messages with the pattern "(timeout) $testname" into
+ "$estname (timeout)" since tools will handle this as $testname[1] (which
+ is what we want in this particular scenario).
+
+ Tested on x86_64-linux.
+
+ [1] https://sourceware.org/gdb/wiki/GDBTestcaseCookbook#Do_not_use_.22tail_parentheses.22_on_test_messages
+
+2022-01-07 Lancelot SIX <lsix@lancelotsix.com>
+
+ gdb/testsuite: Remove duplicates from gdb.threads/staticthreads.ex
+ When running the testsuite, I have:
+
+ Running .../gdb/testsuite/gdb.threads/staticthreads.exp ...
+ DUPLICATE: gdb.threads/staticthreads.exp: couldn't compile staticthreads.c: unrecognized error
+
+ Fix by using foreach_with_prefix instead of foreach when preparing the
+ test case.
+
+ Testeed on x86_64-linux both in a setup where the test fails to prepare
+ and in a setup where the test fails to setup.
+
+2022-01-07 Lancelot SIX <lsix@lancelotsix.com>
+
+ gdb/testsuite: Remove duplicates from gdb.mi/mi-language.exp
+ When running the testsuite, I have:
+
+ Running .../gdb/testsuite/gdb.mi/mi-language.exp ...
+ DUPLICATE: gdb.mi/mi-language.exp: set lang ada
+
+ This is due to an erroneous explicit test name. This explicit test name
+ also happens to be useless (at least it would have been if it was
+ correct) since it only repeats the command, so just remove the explicit
+ test name and let the command be used as default test name. Also remove
+ explicit test name at another location in the file since it also just
+ repeat the command.
+
+ Tested on x86_64-linux.
+
+2022-01-07 Lancelot SIX <lsix@lancelotsix.com>
+
+ gdb/testsuite: Remove duplicates from gdb.mi/mi-nonstop-exit.exp
+ When running the testsuite, I have:
+
+ Running .../gdb/testsuite/gdb.mi/mi-nonstop-exit.exp ...
+ DUPLICATE: gdb.mi/mi-nonstop-exit.exp: breakpoint at main
+ DUPLICATE: gdb.mi/mi-nonstop-exit.exp: mi runto main
+
+ This test runs the same sequence of operations twice. Refactor the code
+ by running both of those sequences within a foreach_with_prefix block to
+ ensure that the commands have unique test names.
+
+ Tested on x86_64-linux.
+
+2022-01-07 Lancelot SIX <lsix@lancelotsix.com>
+
+ gdb/testsuite: Remove duplicates from gdb.mi/mi-nonstop.exp
+ When running the testsuite, I have:
+
+ Running .../gdb/testsuite/gdb.mi/mi-nonstop.exp ...
+ DUPLICATE: gdb.mi/mi-nonstop.exp: check varobj, w1, 1
+ DUPLICATE: gdb.mi/mi-nonstop.exp: stacktrace of stopped thread
+
+ Fix by adjusting the problematic test names.
+
+ Tested on x86_64-linux.
+
+2022-01-07 Lancelot SIX <lsix@lancelotsix.com>
+
+ gdb/testsuite: Remove duplicates from gdb.mi/mi-nsthrexec.exp
+ When running the testsuite, I have:
+
+ Running .../gdb/testsuite/gdb.mi/mi-nsthrexec.exp ...
+ DUPLICATE: gdb.mi/mi-nsthrexec.exp: breakpoint at main
+
+ Fix by adjusting the duplicated test name.
+
+ Tested on x86_64-linux.
+
+2022-01-07 Lancelot SIX <lsix@lancelotsix.com>
+
+ gdb/testsuite: Remove duplicates from gdb.base/watchpoints.exp
+ When running the testsuite, I have:
+
+ Running ../gdb/testsuite/gdb.base/watchpoints.exp ...
+ DUPLICATE: gdb.base/watchpoints.exp: watchpoint hit, first time
+
+ Fix by adjusting the test names where appropriate.
+
+ Tested on x86_64-linux.
+
+2022-01-07 Lancelot SIX <lsix@lancelotsix.com>
+
+ gdb/testsuite: Remove duplicates from gdb.base/nested-subp2.exp
+ When running the testsuite, I have:
+
+ Running .../gdb/testsuite/gdb.base/nested-subp2.exp ...
+ DUPLICATE: gdb.base/nested-subp2.exp: continue to the STOP marker
+ DUPLICATE: gdb.base/nested-subp2.exp: print c
+ DUPLICATE: gdb.base/nested-subp2.exp: print count
+
+ Fix by using with_test_prefix to differentiate the test that are
+ performed at different points during the execution of the debuggee.
+
+ Tested on x86_64-linux.
+
+2022-01-07 Lancelot SIX <lsix@lancelotsix.com>
+
+ gdb/testsuite: Remove duplicates from gdb.base/call-signal-resume.exp
+ When running the testsuite, I have:
+
+ Running .../gdb/testsuite/gdb.base/call-signal-resume.exp ...
+ DUPLICATE: gdb.base/call-signal-resume.exp: dummy stack frame number
+ DUPLICATE: gdb.base/call-signal-resume.exp: set confirm off
+ DUPLICATE: gdb.base/call-signal-resume.exp: return
+
+ This is due to the fact that a pattern was probably copy/pasted to
+ re-use the logic while not adjusting the test names to avoid the
+ duplication.
+
+ Fix by removing the redundant tests ('set confirm off' only needs to be
+ used once) and adjusting the test names where appropriate.
+
+ Tested on x86_64-linux.
+
+2022-01-07 Lancelot SIX <lsix@lancelotsix.com>
+
+ gdb/testsuite: Remove duplicates from gdb.base/pointers.exp
+ When I run the testsuite, I have :
+
+ Running .../gdb/testsuite/gdb.base/pointers.exp ...
+ DUPLICATE: gdb.base/pointers.exp: pointer assignment
+
+ Fix by placing the sections with duplication in with_test_prefix blocks.
+ This removes the duplication and gives a better organization the file.
+
+ Tested on x86_64-linux.
+ Co-Authored-By: Pedro Alves <pedro@palves.net>
+
+2022-01-07 Lancelot SIX <lsix@lancelotsix.com>
+
+ gdb/testsuite: Remove duplicates from gdb.base/unload.exp
+ When running the testsuite, I have:
+
+ Running .../gdb/testsuite/gdb.base/unload.exp ...
+ DUPLICATE: gdb.base/unload.exp: continuing to unloaded libfile
+
+ Fix by adjusting the test name.
+
+ Tested on x86_64-linux.
+
+2022-01-07 Lancelot SIX <lsix@lancelotsix.com>
+
+ gdb/testsuite: Remove duplicates from gdb.base/define-prefix.exp
+ When running the testsuite, I have:
+
+ Running .../gdb/testsuite/gdb.base/define-prefix.exp ...
+ DUPLICATE: gdb.base/define-prefix.exp: define user command: ghi-prefix-cmd
+
+ Fix by adjusting test names.
+
+ Tested on x86_64-linux.
+
+2022-01-07 Lancelot SIX <lsix@lancelotsix.com>
+
+ gdb/testsuite: Remove duplicates from gdb.base/funcargs.exp
+ When running the testsuite, I have:
+
+ Running .../gdb/testsuite/gdb.base/funcargs.exp ...
+ DUPLICATE: gdb.base/funcargs.exp: run to call2a
+
+ Fix by using proc_with_prefix instead on plain proc to create logical
+ function blocks.
+
+ Tested on x86_64-linux.
+
+2022-01-07 Lancelot SIX <lsix@lancelotsix.com>
+
+ gdb/testsuite: Remove duplicates from gdb.base/shlib-call.exp
+ When I run the testsuite, I have:
+
+ Running .../gdb/testsuite/gdb.base/shlib-call.exp ...
+ DUPLICATE: gdb.base/shlib-call.exp: print g
+ DUPLICATE: gdb.base/shlib-call.exp: set print sevenbit-strings
+ DUPLICATE: gdb.base/shlib-call.exp: set print address off
+ DUPLICATE: gdb.base/shlib-call.exp: set width 0
+ DUPLICATE: gdb.base/shlib-call.exp: continue until exit
+
+ Fix by adjusting the test names when required, and by removing
+ un-necessary commands.
+
+ While at it, do some cleanup:
+ - Replace an explicit GDB restart sequence with a call to clean_restart.
+ - Remove trailing whitespaces.
+ - Use $gdb_test_name in gdb_test_multiple.
+
+ Tested on x86_64-linux.
+
+2022-01-07 Lancelot SIX <lsix@lancelotsix.com>
+
+ gdb/testsuite: Remove duplicates from gdb.base/set-cfd.exp
+ When running the testsuite, I have:
+
+ Running .../gdb/testsuite/gdb.base/set-cwd.exp ...
+ DUPLICATE: gdb.base/set-cwd.exp: test_cwd_reset: continue to breakpoint: break-here
+
+ Fix by moving the tests after the 'runto_main' within the same
+ with_test_prefix scope.
+
+ While at it, I fix some indentation issues.
+
+ Tested on x86_64-linux.
+
+2022-01-07 Lancelot SIX <lsix@lancelotsix.com>
+
+ gdb/testsuite: Remove duplicates from gdb.base/exprs.exp
+ When running the testsuite, I have:
+
+ Running .../gdb/testsuite/gdb.base/exprs.exp ...
+ DUPLICATE: gdb.base/exprs.exp: \$[0-9]* = red (setup)
+
+ Fix by using with_test_prefix where appropriate.
+
+ Tested on x86_64-linux.
+
+2022-01-07 Lancelot SIX <lsix@lancelotsix.com>
+
+ gdb/testsuite: Remove duplicates from gdb.base/readline.exp
+ When running the testsuite, I have:
+
+ Running .../gdb/testsuite/gdb.base/readline.exp ...
+ DUPLICATE: gdb.base/readline.exp: Simple operate-and-get-next - final prompt
+
+ Fix by adjusting the prefix given to the second 'simple' call to
+ operate_and_get_next.
+
+ Tested on x86_64-linux.
+
+2022-01-07 Lancelot SIX <lsix@lancelotsix.com>
+
+ gdb/testsuite: Remove duplicates from gdb.base/pretty-array.exp
+ When I run the testsuite, I have:
+
+ Running .../gdb/testsuite/gdb.base/pretty-array.exp ...
+ DUPLICATE: gdb.base/pretty-array.exp: print nums
+ DUPLICATE: gdb.base/pretty-array.exp: print nums
+
+ Fix by giving a name to the test cases.
+
+ Tested on x86_64-linux.
+
+2022-01-07 Lancelot SIX <lsix@lancelotsix.com>
+
+ gdb/testsuite: Remove duplicates from gdb.base/ui-redirect.exp
+ When running the testsuite, I have:
+
+ Running .../gdb/testsuite/gdb.base/ui-redirect.exp ...
+ DUPLICATE: gdb.base/ui-redirect.exp: redirect while already logging: set logging redirect off
+
+ Fix by moving the first 'set logging redirect off' to the end of the
+ previous [with_test_prefix] test block. The statement's purpose is to
+ clean the on flag set in this previous block, so moving it there makes
+ sense and does not change the sequence of commands in the test file.
+
+ Tested on x86_64-linux.
+
+2022-01-07 Lancelot SIX <lsix@lancelotsix.com>
+
+ gdb: completion-support.exp: improve leading whitespace support
+ There is a expect support library in the source tree designed to help
+ developers test the auto-completion capabilities of GDB.
+
+ One of the functions is test_gdb_complete_unique_re. It is used
+ (usually indirectly via test_gdb_complete_unique) to test that a given
+ input line is completed as a given output line. The test checks for two
+ ways to do the completion: using tab-completion, or using the
+ 'complete' command. To do this, calls to two dedicated functions are
+ performed. If we omit few details, we can consider that a call to
+
+ test_gdb_complete_unique $input $expected
+
+ is equivalent to the two following calls:
+
+ test_gdb_complete_tab_unique $input $expected
+ test_gdb_complete_cmd_unique $input $expected
+
+ When using the tab-completion, everything works as expected, but some
+ care must be taken when using the 'complete' command if the given input
+ has leading whitespaces. In such situation, the output of the
+ 'complete' command will drop the leading whitespaces.
+
+ The current approach is that in such situation, the input and expected
+ outputs are right trimmed (i.e. all leading whitespaces are removed)
+ when performing the command completion check.
+
+ This means that the following call:
+
+ test_gdb_complete_unique " $input" " $expected"
+
+ is almost equivalent to (again, omitting few details and arguments):
+
+ test_gdb_complete_tab_unique " $input" " $expected"
+ test_gdb_complete_cmd_unique "$input" "$expected"
+
+ This approach comes with a problem that we encounter when running the
+ tests in complete-empty.exp. When doing so, we have:
+
+ Running .../gdb/testsuite/gdb.base/complete-empty.exp ...
+ DUPLICATE: gdb.base/complete-empty.exp: empty-input-line: cmd complete ""
+
+ This is because the test file does something like:
+
+ test_gdb_complete_unique "" "!" " " 1
+ test_gdb_complete_unique " " " !" " " 1¬
+
+ which, if we do the substitution introduced above is equivalent to:
+
+ test_gdb_complete_tab_unique "" "!"
+ test_gdb_complete_cmd_unique "" "!"
+ test_gdb_complete_tab_unique " " " !"
+ test_gdb_complete_cmd_unique "" "!"
+
+ We see that the lines 2 and 4 are now the same, and for this reason the
+ testing framework complains about DUPLICATE test names.
+
+ To fix that, this commit proposes that instead of left trimming both
+ input and expected outputs, only the expected output is trimmed.
+
+ Care must be taken in the case the completion gives more possibilities
+ than allowed by the max-completions setting. In this case, the input
+ will be repeated in the output in its left trimmed version. This commit
+ also ensures that this is taken care of.
+
+ With this commit, the gdb.base/complete-empty.exp still passes all its
+ tests but does not report the DUPLICATE anymore.
+
+ Tested on x86_64-linux.
+
+2022-01-07 Lancelot SIX <lsix@lancelotsix.com>
+
+ gdb/testsuite: Remove duplicates from gdb.base/subst.exp
+ When I run the testsuite, I have:
+
+ Running .../gdb/testsuite/gdb.base/subst.ex ...
+ DUPLICATE: gdb.base/subst.exp: unset substitute-path from, no rule entered yet
+
+ Fix by adjusting the problematic test name.
+
+ Tested on x86_64-linux.
+
+2022-01-07 Pedro Alves <pedro@palves.net>
+
+ gdb/testsuite: Remove duplicates from gdb.base/dfp-exprs.exp
+ When I run the testsuite, I have:
+
+ Running ../gdb/testsuite/gdb.base/dfp-exprs.exp ...
+ DUPLICATE: gdb.base/dfp-exprs.exp: p 1.2dl < 1.3df
+
+ Replace hand-written tests checking various comparison operators between
+ various decimal floating point types with a loop to programmatically
+ generate all the combinations. This removes the need to eyeball for all
+ suffixes, which lead to the original duplication.
+
+ Also add a lot more combinations, testing all comparison operators
+ comprehensively. The result is 262 unique tests vs 104 before this
+ patch.
+
+ Tested on x86_86-linux.
+
+ Change-Id: Id215a3d610aa8e032bf06ee160b5e3aed4a92d1e
+
+2022-01-07 Lancelot SIX <lsix@lancelotsix.com>
+
+ gdb/testsuite: Remove duplicates from gdb.base/ptype.exp
+ When running the testsuite, I have:
+
+ Running .../gdb/testsuite/gdb.base/ptype.exp ...
+ DUPLICATE: gdb.base/ptype.exp: ptype the_highest
+ DUPLICATE: gdb.base/ptype.exp: list intfoo
+ DUPLICATE: gdb.base/ptype.exp: list charfoo
+
+ Fix by adjusting the offending test names.
+
+ Tested on x86_64-linux.
+
+2022-01-07 Lancelot SIX <lsix@lancelotsix.com>
+
+ gdb/testsuite: Remove duplicates from gdb.base/dfp-test.exp
+ When running the testsuite, I have:
+
+ Running .../gdb/testsuite/gdb.base/dfp-test.exp ...
+ DUPLICATE: gdb.base/dfp-test.exp: 1.23E is an invalid number
+ DUPLICATE: gdb.base/dfp-test.exp: 1.23E45A is an invalid number
+ DUPLICATE: gdb.base/dfp-test.exp: 1.23E is an invalid number
+ DUPLICATE: gdb.base/dfp-test.exp: 1.23E45A is an invalid number
+
+ Fix by using proc_with_prefix where appropriate.
+
+ Tested on x86_64-linux.
+ Co-Authored-By: Andrew Burgess <aburgess@redhat.com>
+
+2022-01-07 Lancelot SIX <lsix@lancelotsix.com>
+
+ gdb/testsuite: Remove duplicates from gdb.base/del.exp
+ When running the testsuite, I have:
+
+ Running .../gdb/testsuite/gdb.base/del.exp ...
+ DUPLICATE: gdb.base/del.exp: info break after removing break on main
+
+ Refactor slightly this test to run the various configurations under
+ foreach_with_prefix so each variant is automatically prefixed, ensuring
+ that the forgotten custom test name cannot happen.
+
+ Tested on x86_64-linux.
+
+2022-01-07 Lancelot SIX <lsix@lancelotsix.com>
+
+ gdb/testsuite: Remove duplicates from gdb.base/solib-display.exp
+ When running the testsuite, I have:
+
+ Running .../gdb/testsuite/gdb.base/solib-display.exp ...
+ DUPLICATE: gdb.base/solib-display.exp: NO: break 25
+ DUPLICATE: gdb.base/solib-display.exp: NO: continue
+ DUPLICATE: gdb.base/solib-display.exp: IN: break 25
+ DUPLICATE: gdb.base/solib-display.exp: IN: continue
+ DUPLICATE: gdb.base/solib-display.exp: SEP: break 25
+ DUPLICATE: gdb.base/solib-display.exp: SEP: continue
+
+ The 'break 25' appears because the test inserts two breakpoints at the
+ same location. Fix this by only inserting the breakpoint once.
+
+ Fix the 'continue' DUPLICATE by giving a phony name to the second
+ continue: 'continue two'.
+
+ While at it, this commit also removes a trailing space.
+
+ Tested on x86_64-linux.
+
+2022-01-07 Lancelot SIX <lsix@lancelotsix.com>
+
+ gdb/testsuite: Remove duplicates from gdb.base/decl-before-def.exp
+ When running the testsuite, I have:
+
+ Running .../gdb/testsuite/gdb.base/decl-before-def.exp ...
+ DUPLICATE: gdb.base/decl-before-def.exp: p a
+
+ Fix by giving explicit names to the two tests that use the same command.
+
+ Tested on x86_64-linux.
+
+2022-01-07 Lancelot SIX <lsix@lancelotsix.com>
+
+ gdb/testsuite: Remove duplicates from gdb.base/pending.exp
+ When running the testsuite, I have:
+
+ Running .../gdb/testsuite/gdb.base/pending.exp ...
+ DUPLICATE: gdb.base/pending.exp: disable other breakpoints
+
+ Fix by adjusting the test names.
+
+ Tested on x86_64-linux.
+
+2022-01-07 Lancelot SIX <lsix@lancelotsix.com>
+
+ gdb/testsuite: Remove duplicates from gdb.base/checkpoint.exp
+ When running the testsuite, I have:
+
+ Running .../gdb/testsuite/gdb.base/checkpoint.exp ...
+ DUPLICATE: gdb.base/checkpoint.exp: verify lines 5 two
+ DUPLICATE: gdb.base/checkpoint.exp: restart 0 one
+
+ This patch fixes the various erroneous incorrect test names.
+
+ While at it, this patch also remove some trailing white spaces across
+ the file.
+
+ Tested on x86_64-linux.
+
+2022-01-07 Lancelot SIX <lsix@lancelotsix.com>
+
+ gdb/testsuite: Remove duplicates from gdb.base/pie-fork.exp
+ When running the testsuite, I have:
+
+ Running .../gdb/testsuite/gdb.base/pie-fork.exp ...
+ DUPLICATE: gdb.base/pie-fork.exp: test_no_detach_on_fork: continue
+
+ Fix by giving explicit names to the 'continue' commands that cause the
+ duplicate message.
+
+ Tested on x86_64-linux.
+
+2022-01-07 Lancelot SIX <lsix@lancelotsix.com>
+
+ gdb/testsuite: Remove duplicates from gdb.base/realname-expand.exp
+ When running the testsuite, I have:
+
+ Running .../gdb/testsuite/gdb.base/realname-expand.exp ...
+ DUPLICATE: gdb.base/realname-expand.exp: set basenames-may-differ on
+
+ This is due to the fact that the test restarts GDB twice and each time
+ sets the basenames-may-differ setting. This patch proposes to fix this
+ by not restarting GDB so the setting is maintained. It just clears the
+ breakpoints between the two tests and updates the breakpoints number as
+ required.
+
+ This patch also perform some minor refactorings to improve visibility.
+
+ Tested on x86_64-linux.
+
+2022-01-07 Lancelot SIX <lsix@lancelotsix.com>
+
+ gdb/testsuite: Remove duplicates from gdb.base/interp.exp
+ When running the testsuite I have:
+
+ Running .../gdb/testsuite/gdb.base/interp.exp ...
+ DUPLICATE: gdb.base/interp.exp: interpreter-exec mi "-var-update *"
+
+ This is due to the fact that multiple successive instances of
+ gdb_test_multiple use 'pass $cmd', but one of them forgets to reset $cmd
+ to a new test name.
+
+ Fix by using 'pass $gdb_test_name', given that the gdb_test_name is set
+ by gdb_test_multiple.
+
+ While fixing this, this patch refactors all occurrences of the following
+ pattern:
+
+ set cmd foo
+ gdb_test_multiple $cmd $cmd {
+ -re ... {
+ pass $cmd
+ }
+ }
+
+ into
+
+ gdb_test_multiple foo "" {
+ -re ... {
+ pass $gdb_test_name
+ }
+ }
+
+ This makes this test file coherent in its use of $gdb_test_name.
+
+ Tested on x86_64-linux.
+
+2022-01-07 Lancelot SIX <lsix@lancelotsix.com>
+
+ gdb/testsuite: Remove duplicates from gdb.base/miscexprs.exp
+ When running the testsuite I see:
+
+ Running .../gdb/testsuite/gdb.base/miscexprs.exp ...
+ DUPLICATE: gdb.base/miscexprs.exp: print value of !ibig.i[100]
+ DUPLICATE: gdb.base/miscexprs.exp: print value of !ibig.i[100]
+
+ This is due to an explicit test name repeated across multiple tests.
+ The actual test explicit names do not add much over the command from
+ wich default test names are derived.
+
+ Fix by removing the explicit test names across the file where they do
+ not add value. While at doing some cleaning, also use $gdb_test_name in
+ the various uses of gdb_test_multiple.
+
+ Tested on x86_64-linux.
+
+2022-01-07 Lancelot SIX <lsix@lancelotsix.com>
+
+ gdb/testsuite: Remove duplicates from gdb.base/stack-checking.exp
+ When running the testsuite I have:
+
+ Running .../gdb/testsuite/gdb.base/stack-checking.exp ...
+ DUPLICATE: gdb.base/stack-checking.exp: bt
+ DUPLICATE: gdb.base/stack-checking.exp: bt
+
+ Fix by using with_test_prefix.
+
+ Tested on x86_64-linux.
+
+2022-01-07 Philipp Tomsich <philipp.tomsich@vrull.eu>
+
+ RISC-V: update docs to reflect privileged spec v1.9 has been dropped
+ After commit d8af286fffa ("RISC-V: Drop the privileged spec v1.9
+ support.") has removed support for privileged spec v1.9, this removes
+ it from the documentation.
+
+ References: d8af286fffa ("RISC-V: Drop the privileged spec v1.9 support.")
+
+ gas/ChangeLog:
+
+ * configure: Regenerate.
+ * configure.ac: Remove reference to priv spec 1.9.
+ * po/fr.po: Same.
+ * po/ru.po: Same.
+ * po/uk.po: Same.
+
+2022-01-07 Philipp Tomsich <philipp.tomsich@vrull.eu>
+
+ RISC-V: update docs for -mpriv-spec/--with-priv-spec for 1.12
+ While support for the privileged spec was added in a63375ac337
+ ("RISC-V: Hypervisor ext: support Privileged Spec 1.12"), the
+ documentation has not been updated. Add 1.12 to the relevant
+ documentation.
+
+ References: a63375ac337 ("RISC-V: Hypervisor ext: support Privileged Spec 1.12")
+
+ gas/ChangeLog:
+
+ * config/tc-riscv.c: Add 1.12 to the usage message.
+ * configure: Regenerate.
+ * configure.ac: Add 1.12 to the help/usage message.
+ * po/fr.po: Same.
+ * po/ru.po: Same.
+ * po/uk.po: Same.
+
+2022-01-07 Tom Tromey <tromey@adacore.com>
+
+ Do not use CC_HAS_LONG_LONG
+ ax.cc checks CC_HAS_LONG_LONG, but nothing defines this. However,
+ PRINTF_HAS_LONG_LONG is checked in configure. This patch removes the
+ former and keeps the latter. This is PR remote/14976 (filed by me in
+ 2012, lol).
+
+ I'm checking this in.
+
+ Bug: https://sourceware.org/bugzilla/show_bug.cgi?id=14976
+
+2022-01-07 Andrew Burgess <aburgess@redhat.com>
+
+ gdb/doc: shorten some source lines, and prevent some line breaks
+ Building on the previous commit, this makes use of a trailing @ to
+ split long @deffn lines in the guile.texi source file. This splitting
+ doesn't change how the document is laid out by texinfo.
+
+ I have also wrapped keyword and argument name pairs in @w{...} to
+ prevent line breaks appearing between the two. I've currently only
+ done this for the longer @deffn lines, where a line break is
+ possible. This makes the @deffn lines much nicer to read in the
+ generated pdf.
+
+2022-01-07 Andrew Burgess <aburgess@redhat.com>
+
+ gdb/doc: Remove (...) around guile procedure names in @deffn lines
+ Most guile procedures in the guile.texi file are defined like:
+
+ @deffn {Scheme Procedure} name arg1 arg2 arg3
+
+ But there are two places where we do this:
+
+ @deffn {Scheme Procedure} (name arg1 arg2 arg3)
+
+ Notice the added (...). Though this does represent how a procedure
+ call is written in scheme, it's not the normal style throughout the
+ manual. I also checked the 'info guile' info page to see how they
+ wrote there declarations, and they use the first style too.
+
+ The second style also has the drawback that index entries are added as
+ '(name', and so they are grouped in the '(' section of the index,
+ which is not very user friendly.
+
+ In this commit I've changed the definitions of make-command and
+ make-parameter to use the first style.
+
+ The procedure declaration lines can get pretty long with all of the
+ arguments, and this was true for both of the procedures I am changing
+ in this commit. I have made use of a trailing '@' to split the deffn
+ lines, and keep them under 80 characters in the texi source. This
+ makes no difference to how the final document looks.
+
+ Finally, our current style for keyword arguments, appears to be:
+
+ [#:keyword-name argument-name]
+
+ I don't really understand the reason for this, 'info guile' just seems
+ to use:
+
+ [#:keyword-name]
+
+ which seems just as good to me. But I don't propose to change
+ that just now. What I do notice though, is that sometimes, texinfo
+ will place a line break between the keyword-name and the
+ argument-name, for example, the pdf of make-command is:
+
+ make-command name [#:invoke invoke] [#:command-class
+ command-class] [#:completer-class completer] [#:prefix? prefix] [#:doc
+ doc-string]
+
+ Notice the line break after '#:command-class' and after '#:doc',
+ neither of which are ideal. And so, for the two commands I am
+ changing in this commit, I have made use of @w{...} to prevent line
+ breaks between the keyword-name and the argument-name. Now the pdf
+ looks like this:
+
+ make-command name [#:invoke invoke]
+ [#:command-class command-class] [#:completer-class completer]
+ [#:prefix? prefix] [#:doc doc-string]
+
+ Which seems much better. I'll probably update the other deffn lines
+ at some point.
+
+2022-01-07 Pavel Mayorov <pmayorov@cloudlinux.com>
+
+ Revert previous delta to debug.c. Replace with patch to reject indirect types that point to indirect types.
+ PR 28718
+ * dwarf.c: Revert previous delta.
+ (debug_get_real_type): Reject indirect types that point to
+ indirect types.
+ (debug_get_type_name, debug_get_type_size, debug_write_type):
+ Likewise.
+
+2022-01-07 Nelson Chu <nelson.chu@sifive.com>
+
+ RISC-V: Updated the default ISA spec to 20191213.
+ Update the default ISA spec from 2.2 to 20191213 will change the default
+ version of i from 2.0 to 2.1. Since zicsr and zifencei are separated
+ from i 2.1, users need to add them in the architecture string if they need
+ fence.i and csr instructions. Besides, we also allow old ISA spec can
+ recognize zicsr and zifencei, but we won't output them since they are
+ already included in the i extension when i's version is less than 2.1.
+
+ bfd/
+ * elfxx-riscv.c (riscv_parse_add_subset): Allow old ISA spec can
+ recognize zicsr and zifencei.
+ gas/
+ * config/tc-riscv.c (DEFAULT_RISCV_ISA_SPEC): Updated to 20191213.
+ * testsuite/gas/riscv/csr-version-1p10.d: Added zicsr to -march since
+ the default version of i is 2.1.
+ * testsuite/gas/riscv/csr-version-1p11.d: Likewise.
+ * testsuite/gas/riscv/csr-version-1p12.d: Likewise.
+ * testsuite/gas/riscv/csr-version-1p9p1.d: Likewise.
+ * testsuite/gas/riscv/option-arch-03.d: Updated i's version to 2.1.
+ * testsuite/gas/riscv/option-arch-03.s: Likewise.
+ ld/
+ * testsuite/ld-riscv-elf/call-relax.d: Added zicsr to -march since
+ the default version of i is 2.1.
+ * testsuite/ld-riscv-elf/attr-merge-arch-01.d: Updated i's version to 2.1.
+ * testsuite/ld-riscv-elf/attr-merge-arch-01a.s: Likewise.
+ * testsuite/ld-riscv-elf/attr-merge-arch-01b.: Likewise.
+ * testsuite/ld-riscv-elf/attr-merge-arch-02.d: Likewise.
+ * testsuite/ld-riscv-elf/attr-merge-arch-02a.s: Likewise.
+ * testsuite/ld-riscv-elf/attr-merge-arch-02b.s: Likewise.
+ * testsuite/ld-riscv-elf/attr-merge-arch-03.d: Likewise.
+ * testsuite/ld-riscv-elf/attr-merge-arch-03a.s: Likewise.
+ * testsuite/ld-riscv-elf/attr-merge-arch-03b.s: Likewise.
+ * testsuite/ld-riscv-elf/attr-merge-arch-failed-02.d: Added zifencei
+ into Tag_RISCV_arch since it is added implied when i's version is
+ larger than 2.1.
+
+2022-01-07 Alan Modra <amodra@gmail.com>
+
+ Move elf_backend_always_size_sections earlier
+ * elflink.c (bfd_elf_size_dynamic_sections): Move plt/got init
+ earlier and call elf_backend_always_size_sections at the start
+ of this function.
+
+2022-01-07 GDB Administrator <gdbadmin@sourceware.org>
+
+ Automatic date update in version.in
+
+2022-01-06 H.J. Lu <hjl.tools@gmail.com>
+
+ ldelfgen.c: Add missing newlines when calling einfo
+ * ldelfgen.c (ldelf_map_segments): Add the missing newline to
+ einfo.
+
+2022-01-06 Nick Clifton <nickc@redhat.com>
+
+ Fix a stack exhaustion bug parsing malicious STABS format debug information.
+ PR 28718
+ * debug.c (debug_write_type): Allow for malicious recursion via
+ indirect debug types.
+
+2022-01-06 Richard Sandiford <richard.sandiford@arm.com>
+
+ aarch64: Add support for new SME instructions
+ This patch adds support for three new SME instructions: ADDSPL,
+ ADDSVL and RDSVL. They behave like ADDPL, ADDVL and RDVL, but read
+ the streaming vector length instead of the current vector length.
+
+ opcodes/
+ * aarch64-tbl.h (aarch64_opcode_table): Add ADDSPL, ADDSVL and RDSVL.
+ * aarch64-dis-2.c: Regenerate.
+
+ gas/
+ * testsuite/gas/aarch64/sme.s, testsuite/gas/aarch64/sme.d: Add tests
+ for ADDSPL, ADDSVL and RDSVL.
+
+2022-01-06 Tom Tromey <tom@tromey.com>
+
+ Use target_announce_detach in more targets
+ target_announce_detach was added in commit 0f48b757 ("Factor out
+ "Detaching from program" message printing"). There, Pedro wrote:
+
+ (For now, I left the couple targets that print this a bit differently
+ alone. Maybe this could be further pulled out into infcmd.c. If we
+ did that, and those targets want to continue printing differently,
+ this new function could be converted to a target method.)
+
+ It seems to me that the differences aren't very big, and in some cases
+ other targets handled the output a bit more nicely. In particular,
+ some targets will print a different message when exec_file==NULL,
+ rather than printing the same output with an empty string as
+ exec_file.
+
+ This patch incorporates the nicer output into target_announce_detach,
+ then changes the remaining ports to use this function.
+
+2022-01-06 Tom Tromey <tom@tromey.com>
+
+ Introduce target_announce_attach
+ This introduces target_announce_attach, by analog with
+ target_announce_detach. Then it converts existing targets to use
+ this, rather than emitting their own output by hand.
+
+2022-01-06 Andrew Burgess <aburgess@redhat.com>
+
+ gdb: make use add_setshow_prefix_cmd in gnu-nat.c
+ In gnu-nat.c we currently implement some set/show prefix commands
+ "manually", that is, we call add_prefix_cmd, and assign a set and show
+ function to each prefix command.
+
+ These set/show functions print an error indicating that the user
+ didn't type a complete command.
+
+ If we instead switch to using add_setshow_prefix_cmd then we can
+ delete the set/show functions, GDB provides some default functions,
+ which give a nice help style summary that lists all of the available
+ sub-commands, along with a one line summary of what each does.
+
+ Though this clearly changes the existing behaviour, I think this
+ change is acceptable as the new behaviour is more inline with other
+ set/show prefix commands, and the new behaviour is more informative.
+
+ This change will conflict with Tom's change here:
+
+ https://sourceware.org/pipermail/gdb-patches/2022-January/184724.html
+
+ Where Tom changes the set/show functions that I delete. My suggestion
+ is that the set/show functions still be deleted even after Tom's
+ patch (or instead of Tom's patch).
+
+ For testing I've build GDB on GNU/Hurd, and manually tested these
+ functions. I did a grep over the testsuite, and don't believe the
+ existing error messages are being checked for in any tests.
+
+2022-01-06 Tom Tromey <tom@tromey.com>
+
+ Use warning in windows-nat error messages
+ A warning in windows-nat.c can be converted to use the warning
+ function. As a side effect, this arranges for the output to be sent
+ to gdb_stderr.
+
+2022-01-06 Tom Tromey <tom@tromey.com>
+
+ Clean up some dead code in windows-tdep.c
+ windows-tdep.c checks the result of xmalloc, which isn't necessary. I
+ initially removed this dead check, but then went a bit further and
+ modified the code so that some "goto"s and explicit memory management
+ could be removed. Then, I added a couple of missing bounds checks.
+
+ I believe this also fixes a possible bug with a missing 0-termination
+ of a string. I am not certain, but that is why I think the existing
+ code allocates a buffer that is 1 byte too long -- but then it fails
+ to set this byte to 0.
+
+2022-01-06 Tom Tromey <tromey@adacore.com>
+
+ Avoid crash in language_info
+ language_info calls:
+
+ show_language_command (NULL, 1, NULL, NULL);
+
+ ... "knowing" that show_language_command does not use its ui_file
+ parameter. However, this was changed in commit 7514a661
+ ("Consistently Use ui_file parameter to show callbacks").
+
+ This patch changes language_info to pass a ui_file.
+
+ It took a while to write the test -- this function is only called when
+ 'verbose' is on and when switching the "expected" language in auto
+ mode.
+
+2022-01-06 Tom Tromey <tromey@adacore.com>
+
+ Fix some failures in langs.exp
+ langs.exp currently has some fails for me because the stack trace
+ includes full paths to the source files.
+
+ FAIL: gdb.base/langs.exp: up to foo in langs.exp
+ FAIL: gdb.base/langs.exp: up to cppsub_ in langs.exp
+ FAIL: gdb.base/langs.exp: up to fsub in langs.exp
+
+ This fixes the failures by making the filename regexps a bit more lax.
+
+2022-01-06 Jan Beulich <jbeulich@suse.com>
+
+ x86: drop NoAVX insn attribute
+ To avoid issues like that addressed by 6e3e5c9e4181 ("x86: extend SSE
+ check to PCLMULQDQ, AES, and GFNI insns"), base the check on opcode
+ attributes and operand types.
+
+ x86: drop NoAVX from POPCNT
+ With the introduction of CpuPOPCNT the NoAVX attribute has become
+ meaningless for POPCNT.
+
+ x86: drop some "comm" template parameters
+ As already indicated in a remark when introducing these templates, the
+ "commutative" attribute is ignored for legacy encoding templates. Hence
+ it is possible to shorten a number of templates by specifying C directly
+ rather than through a template parameter. I think this helps readability
+ a bit.
+
+ x86: templatize FMA insn templates
+ The operand ordering portion of the mnemonics repeats, causing a flurry
+ of almost identical templates. Abstract this out.
+
+ x86-64: restrict PC32 -> PLT32 conversion
+ Neither non-64-bit code nor uses with a non-zero offset from a symbol
+ should be converted to PLT32, as an eventual PLT entry would not express
+ what was requested.
+
+2022-01-06 Lancelot SIX <lancelot.six@amd.com>
+
+ gdb: Fix copyright year in gdb/testsuite/gdb.base/inferior-clone.exp
+ I just realized that I forgot to update the year before pushing the
+ patch that created this file. Since it landed after the global
+ copyright year update have been done, this file’s copyright year is
+ updated.
+
+ This patch fixes that.
+
+ Change-Id: I280f7d86e02d38425f7afdcf19a1c3500d51c23f
+
+2022-01-06 Mike Frysinger <vapier@gentoo.org>
+
+ sim: ppc: migrate to standard uintXX_t types
+ Drop the sim-specific unsignedXX types and move to the standard uintXX_t
+ types that C11 provides.
+
+ sim: common: migrate to standard uintXX_t types
+ Drop the sim-specific unsignedXX types and move to the standard uintXX_t
+ types that C11 provides.
+
+ sim: igen: migrate to standard uintXX_t types
+ Move off the custom local 64-bit types and to the standard uintXX_t
+ types that C11 provides.
+
+ sim: mips: migrate to standard uintXX_t types
+ Move off the sim-specific unsignedXX types and to the standard uintXX_t
+ types that C11 provides.
+
+ sim: cris: migrate to standard uintXX_t types
+ Move off the sim-specific unsignedXX types and to the standard uintXX_t
+ types that C11 provides.
+
+ sim: iq2000: migrate to standard uintXX_t types
+ Move off the sim-specific unsignedXX types and to the standard uintXX_t
+ types that C11 provides.
+
+ sim: synacor: migrate to standard uintXX_t types
+ Move off the sim-specific unsignedXX types and to the standard uintXX_t
+ types that C11 provides.
+
+ sim: msp430: migrate to standard uintXX_t types
+ Move off the sim-specific unsignedXX types and to the standard uintXX_t
+ types that C11 provides.
+
+ sim: riscv: migrate to standard uintXX_t types
+ Move off the sim-specific unsignedXX types and to the standard uintXX_t
+ types that C11 provides.
+
+ sim: bfin: migrate to standard uintXX_t types
+ Move off the sim-specific unsignedXX types and to the standard uintXX_t
+ types that C11 provides.
+
+ sim: testsuite: migrate to standard uintXX_t types
+ This old code setup its own uintXX types, but since we require C11
+ now, we can assume the standard uintXX_t types exist and use them.
+
+ sim: erc32: migrate to standard uintXX_t types
+ This old port setup its own uintXX types, but since we require C11
+ now, we can assume the standard uintXX_t types exist and use them.
+
+ sim: mn10300: migrate to standard uintXX_t types
+ This old port setup its own uintXX types, but since we require C11
+ now, we can assume the standard uintXX_t types exist and use them.
+
+ sim: v850: migrate to standard uintXX_t types
+ This old port setup its own uintXX types, but since we require C11
+ now, we can assume the standard uintXX_t types exist and use them.
+
+2022-01-06 Mike Frysinger <vapier@gentoo.org>
+
+ sim: m68hc11: migrate to standard uintXX_t types
+ This old port setup its own uintXX types, but since we require C11
+ now, we can assume the standard uintXX_t types exist and use them.
+
+ Also migrate off the sim-specific unsignedXX types.
+
+2022-01-06 Mike Frysinger <vapier@gentoo.org>
+
+ sim: d10v: migrate to standard uintXX_t types
+ This old port setup its own uintXX types, but since we require C11
+ now, we can assume the standard uintXX_t types exist and use them.
+
+ Also migrate off the sim-specific unsignedXX types.
+
+2022-01-06 Mike Frysinger <vapier@gentoo.org>
+
+ sim: cr16: migrate to standard uintXX_t types
+ This old port setup its own uintXX types, but since we require C11
+ now, we can assume the standard uintXX_t types exist and use them.
+
+ Also migrate off the sim-specific unsignedXX types.
+
+2022-01-06 GDB Administrator <gdbadmin@sourceware.org>
+
+ Automatic date update in version.in
+
+2022-01-05 H.J. Lu <hjl.tools@gmail.com>
+
+ x86: Add elf_x86_allocate_local_got_info
+ Add elf_x86_allocate_local_got_info to allocate x86 GOT info for local
+ symbols.
+
+ * elf32-i386.c (elf_i386_check_relocs): Call
+ elf_x86_allocate_local_got_info.
+ * elf64-x86-64.c (elf_x86_64_check_relocs): Likewise.
+ * elfxx-x86.h (elf_x86_allocate_local_got_info): New.
+
+2022-01-05 Vladimir Mezentsev <vladimir.mezentsev@oracle.com>
+
+ opcodes: Make i386-dis.c thread-safe
+ Improve thread safety in print_insn_i386_att, print_insn_i386_intel and
+ print_insn_i386 by removing the use of static variables.
+
+ Tested on x86_64-pc-linux-gnu.
+
+ 2022-01-04 Vladimir Mezentsev <vladimir.mezentsev@oracle.com>
+
+ * i386-dis.c: Make print_insn_i386_att, print_insn_i386_intel
+ and print_insn_i386 thread-safe
+
+2022-01-05 H.J. Lu <hjl.tools@gmail.com>
+
+ doc: Replace =frame-interp with =frames-interp
+ The actual objdump and readelf option name is =frames-interp, not
+ =frames-interp.
+
+ PR binutils/28747
+ * doc/debug.options.texi: Replace =frame-interp with
+ =frames-interp.
+
+2022-01-05 Tom Tromey <tromey@adacore.com>
+
+ Change riscv_return_value to use RETURN_VALUE_ABI_PRESERVES_ADDRESS
+ Internally, AdaCore has a test that is equivalent to (really a direct
+ translation of) gdb.base/gnu_vector.exp. On 32-bit RISC-V, the
+ "return" part of this test fails.
+
+ Joel tracked this down to riscv_return_value returning
+ RETURN_VALUE_ABI_RETURNS_ADDRESS. Using
+ RETURN_VALUE_ABI_PRESERVES_ADDRESS is more correct here, and fixes the
+ bug.
+
+ I tested this for both 32- and 64-bit RISC-V using the AdaCore
+ internal test suite, and Andrew Burgess tested it using
+ gnu_vector.exp.
+
+2022-01-05 Tom Tromey <tom@tromey.com>
+
+ Filtered output cleanup in expression dumping
+ Most of the expression-dumping code uses filtered output, but a few
+ functions did not. This patch cleans up these instance.
+
+ Note that this won't cause any behavior change, because the only calls
+ to dump_prefix_expression pass in gdb_stdlog. However, in the long
+ run it's easier to audit the code if the number of uses of _unfiltered
+ is reduced.
+
+2022-01-05 Tom Tromey <tom@tromey.com>
+
+ Use filtered output in terminal_info implementations
+ This changes one terminal_info implementation, and
+ default_terminal_info, to use filtered output. Other implementations
+ of this method already use filtered output.
+
+ I can't compile go32-nat.c, so this is a 'best effort' patch.
+
+2022-01-05 Tom Tromey <tom@tromey.com>
+
+ Use filtered output in gnu-nat.c commands
+ gnu-nat.c has a number of ordinary commands that should use filtered
+ output. In a few cases, I changed the output to use gdb_stderr as
+ well. I can't compile this file, so this patch is split out as a
+ "best effort".
+
+ Use filtered output in *-tdep commands
+ Various targets introduce their own commands, which then use
+ unfiltered output. It's better to use filtered output by default, so
+ this patch fixes the instances I found.
+
+ Use filtered output in btrace-related commands
+ This changes btrace.c and record-btrace.c to use filtered output in
+ the commands implemented there.
+
+ Use filtered output in some dumping commands
+ There are several commands that may optionally send their output to a
+ file -- they take an optional filename argument and open a file. This
+ patch changes these commands to use filtered output. The rationale
+ here is that, when printing to gdb_stdout, filtering is appropriate --
+ it is, and should be, the default for all commands. And, when writing
+ to a file, paging will not happen anyway (it only happens when the
+ stream==gdb_stdout), so using the _filtered form will not change
+ anything.
+
+ Use filtered output in kill command
+ This changes the kill command to use filtered output. I split this
+ one into its own patch because, out of an abundance of caution, I
+ changed the function to call bfd_cache_close_all a bit earlier, in
+ case pagination caused an exception.
+
+2022-01-05 Tom Tromey <tom@tromey.com>
+
+ Use filtered output in ordinary commands
+ Many otherwise ordinary commands choose to use unfiltered output
+ rather than filtered. I don't think there's any reason for this, so
+ this changes many such commands to use filtered output instead.
+
+ Note that complete_command is not touched due to a comment there
+ explaining why unfiltered output is believed to be used.
+
+2022-01-05 Tom Tromey <tom@tromey.com>
+
+ Use filtered output in language_info
+ Change language_info to use filtered output. This is ok because the
+ sole caller uses filtered output elsewhere, and because this function
+ calls show_language_command, which also uses filtered output.
+
+ Use filtered output in files_info implementations
+ This changes the implementations of the target files_info method to
+ use filtered output. This makes sense because the sole caller of this
+ method is an ordinary command (info_program_command). This patch
+ changes this command to use filtered output as well.
+
+ Use filtered output in target-descriptions.c
+ target-descriptions.c uses unfiltered output. However, if you happen
+ to invoke this command interactively, it's probably better for it to
+ use filtering. For non-interactive use, this doesn't matter.
+
+ Use filtered output for gdbarch dump
+ This changes gdbarch dumping to use filtered output. This seems a bit
+ better to me, both on the principle that this is an ordinary command,
+ and because the output can be voluminous, so it may be nice to stop in
+ the middle.
+
+2022-01-05 Tom Tromey <tom@tromey.com>
+
+ Implement putstr and putstrn in ui_file
+ In my tour of the ui_file subsystem, I found that fputstr and fputstrn
+ can be simplified. The _filtered forms are never used (and IMO
+ unlikely to ever be used) and so can be removed. And, the interface
+ can be simplified by removing a callback function and moving the
+ implementation directly to ui_file.
+
+ A new self-test is included. Previously, I think nothing was testing
+ this code.
+
+ Regression tested on x86-64 Fedora 34.
+
+2022-01-05 Tom Tromey <tromey@adacore.com>
+
+ Change how versioned symbols are recorded
+ A change to BFD caused a gdb regression when using the Ada "catch
+ exception" feature. The bug is visible when a shared library throws
+ an exception that is caught in the main executable.
+
+ This was discussed here:
+
+ https://sourceware.org/pipermail/binutils/2021-July/117538.html
+
+ This patch implements Alan's proposed fix, namely to use VERSYM_HIDDEN
+ rather than the name when deciding to install a version-less symbol.
+
+ The internal test case is identical to the catch_ex_std.exp that is
+ in-tree, so I haven't added a new test. I could not make that one
+ fail on x86-64 Linux, though. It's possible that maybe I'd have to
+ update the system linker first, but I didn't want to try that.
+
+ Regression tested on x86-64 Fedora 32.
+
+2022-01-05 Hannes Domani <ssbssa@yahoo.de>
+
+ Fix inferior_thread attribute in new_thread event
+ Commit 72ee03ff58 fixed a use-after-move bug in add_thread_object, but
+ it changed the inferior_thread attribute to contain the inferior instead
+ of the actual thread.
+ This now uses the thread_obj in its new location instead.
+
+ Bug: https://sourceware.org/bugzilla/show_bug.cgi?id=28429
+
+2022-01-05 Tom Tromey <tom@tromey.com>
+
+ Simplify execute_control_commands_to_string
+ execute_control_commands_to_string can be rewritten in terms of
+ execute_fn_to_string, which consolidates some knowledge about which
+ streams to redirect.
+
+ Regression tested on x86-64 Fedora 34.
+
+2022-01-05 Tom Tromey <tromey@adacore.com>
+
+ Do not print anything when self-backtrace unavailable
+ Right now, gdb's self-backtrace feature will still print something
+ when a backtrace is unavailable:
+
+ sig_write (_("----- Backtrace -----\n"));
+ [...]
+ sig_write (_("Backtrace unavailable\n"));
+ sig_write ("---------------------\n");
+
+ However, if GDB_PRINT_INTERNAL_BACKTRACE is undefined, it seems better
+ to me to print nothing at all.
+
+ This patch implements this change. It also makes a couple of other
+ small changes in this same module: it adds a header guard to
+ bt-utils.h, and it protects the definitions of
+ gdb_internal_backtrace_1 with a check of GDB_PRINT_INTERNAL_BACKTRACE.
+
+2022-01-05 Tom Tromey <tromey@adacore.com>
+
+ Fix pager regression
+ The patch to fix paging with redirection caused a regression in the
+ internal AdaCore test suite. The problem occurs when running an MI
+ command from the CLI using interpreter-exec, when paging is enabled.
+ This scenario isn't covered by the current test suite, so this patch
+ includes a new test.
+
+ The problem is that, in this situation, MI does:
+
+ fputs_unfiltered (strcmp (context->command, "target-select") == 0
+ ? "^connected" : "^done", mi->raw_stdout);
+
+ Here raw_stdout is a stdio_file wrapping stdout, so the pager thinks
+ that it is ok to buffer the output. However, in this setup, it isn't
+ ok, and flushing the wrap buffer doesn't really work properly. Also,
+ MI next does:
+
+ mi_out_put (uiout, mi->raw_stdout);
+
+ ... but this uses ui_file::write, which also doesn't flush the wrap
+ buffer.
+
+ I think all this will be fixed by the pager rewrite series I'm working
+ on. However, in the meantime, adding the old gdb_stdout check back to
+ the pager fixes this problem.
+
+ Regression tested on x86-64 Fedora 34.
+
+2022-01-05 H.J. Lu <hjl.tools@gmail.com>
+
+ elf: Set p_align to the minimum page size if possible
+ Currently, on 32-bit and 64-bit ARM, it seems that ld generates p_align
+ values of 0x10000 even if no section alignment is greater than 0x1000.
+ The issue is more general and probably affects other targets with multiple
+ page sizes.
+
+ While file layout absolutely must take 64K page size into account, that
+ does not have to be reflected in the p_align value. If running on a 64K
+ kernel, the file will be loaded at a 64K page boundary by necessity. On
+ a 4K kernel, 64K alignment is not needed.
+
+ The glibc loader has been fixed to honor p_align:
+
+ https://sourceware.org/bugzilla/show_bug.cgi?id=28676
+
+ similar to kernel:
+
+ commit ce81bb256a224259ab686742a6284930cbe4f1fa
+ Author: Chris Kennelly <ckennelly@google.com>
+ Date: Thu Oct 15 20:12:32 2020 -0700
+
+ fs/binfmt_elf: use PT_LOAD p_align values for suitable start address
+
+ This means that on 4K kernels, we will start to do extra work for 64K
+ p_align, but this pointless for pretty much all binaries (whose section
+ alignment rarely exceeds 16).
+
+ The minimum page size is used, instead of the maximum section alignment
+ due to this glibc bug:
+
+ https://sourceware.org/bugzilla/show_bug.cgi?id=28688
+
+ It has been fixed in glibc 2.35. But linker output must work on existing
+ glibc binaries.
+
+ 1. Set p_align to the minimum page size while laying out segments aligning
+ to the maximum page size or section alignment. The run-time loader can
+ align segments to the minimum page size or above, depending on system page
+ size.
+ 2. If -z max-page-size=NNN is used, p_align will be set to the maximum
+ page size or the largest section alignment.
+ 3. If a section requires alignment higher than the minimum page size,
+ don't set p_align to the minimum page size.
+ 4. If a section requires alignment higher than the maximum page size,
+ set p_align to the section alignment.
+ 5. For objcopy, when the minimum page size != the maximum page size,
+ p_align may be set to the minimum page size while segments are aligned
+ to the maximum page size. In this case, the input p_align will be
+ ignored and the maximum page size will be used to align the ouput
+ segments.
+ 6. Update linker to disallow the common page size > the maximum page size.
+ 7. Update linker to avoid the common page size > the maximum page size.
+ 8. Adjust pru_irq_map-1.d to expect p_align == sh_addralign:
+
+ Section Headers:
+ [Nr] Name Type Addr Off Size ES Flg Lk Inf Al
+ [ 0] NULL 00000000 000000 000000 00 0 0 0
+ [ 1] .text PROGBITS 20000000 00007c 000004 00 AX 0 0 4
+ ...
+ Program Headers:
+ Type Offset VirtAddr PhysAddr FileSiz MemSiz Flg Align
+ LOAD 0x000074 0x00000000 0x00000000 0x00008 0x00008 RW 0x1
+ LOAD 0x00007c 0x20000000 0x20000000 0x00004 0x00004 R E 0x4
+
+ vs.
+
+ Section Headers:
+ [Nr] Name Type Addr Off Size ES Flg Lk Inf Al
+ [ 0] NULL 00000000 000000 000000 00 0 0 0
+ [ 1] .text PROGBITS 20000000 00007c 000004 00 AX 0 0 4
+ ...
+ Program Headers:
+ Type Offset VirtAddr PhysAddr FileSiz MemSiz Flg Align
+ LOAD 0x000074 0x00000000 0x00000000 0x00008 0x00008 RW 0x1
+ LOAD 0x00007c 0x20000000 0x20000000 0x00004 0x00004 R E 0x1
+
+ To enable this linker optimization, the backend should define ELF_P_ALIGN
+ to ELF_MINPAGESIZE.
+
+ bfd/
+
+ PR ld/28689
+ PR ld/28695
+ * elf-bfd.h (elf_backend_data): Add p_align.
+ * elf.c (assign_file_positions_for_load_sections): Set p_align
+ to the default p_align value while laying out segments aligning
+ to maximum page size or section alignment.
+ (elf_is_p_align_valid): New function.
+ (copy_elf_program_header): Call elf_is_p_align_valid to determine
+ if p_align is valid.
+ * elfxx-target.h (ELF_P_ALIGN): New. Default to 0.
+ (elfNN_bed): Add ELF_P_ALIGN.
+ * elfxx-x86.h (ELF_P_ALIGN): New. Set to ELF_MINPAGESIZE.
+
+ include/
+
+ PR ld/28689
+ PR ld/28695
+ * bfdlink.h (bfd_link_info): Add maxpagesize_is_set.
+
+ ld/
+
+ PR ld/28689
+ PR ld/28695
+ * emultempl/elf.em (gld${EMULATION_NAME}_handle_option): Set
+ link_info.maxpagesize_is_set for -z max-page-size=NNN.
+ * ldelf.c (ldelf_after_parse): Disallow link_info.commonpagesize
+ > link_info.maxpagesize.
+ * testsuite/ld-elf/elf.exp: Pass -z max-page-size=0x4000 to
+ linker to build mbind2a and mbind2b.
+ * testsuite/ld-elf/header.d: Add -z common-page-size=0x100.
+ * testsuite/ld-elf/linux-x86.exp: Add PR ld/28689 tests.
+ * testsuite/ld-elf/p_align-1.c: New file.
+ * testsuite/ld-elf/page-size-1.d: New test.
+ * testsuite/ld-elf/pr26936.d: Add -z common-page-size=0x1000.
+ * testsuite/ld-elf/seg.d: Likewise.
+ * testsuite/ld-scripts/rgn-at5.d: Likewise.
+ * testsuite/ld-pru/pru_irq_map-1.d: Append 1 to name. Adjust
+ expected PT_LOAD segment alignment.
+ * testsuite/ld-pru/pru_irq_map-2.d: Append 2 to name.
+ * testsuite/ld-scripts/pr23571.d: Add -z max-page-size=0x1000.
+
+2022-01-05 Alan Modra <amodra@gmail.com>
+
+ Adjust quoted-sym-names test
+ Some targets restrict symbol addresses in .text to instruction
+ boundaries.
+
+ * testsuite/gas/all/quoted-sym-names.s: Define syms in .data.
+ * testsuite/gas/all/quoted-sym-names.d: Adjust to suit.
+
+2022-01-05 Alan Modra <amodra@gmail.com>
+
+ infinite recursion detected in gold testcase
+ gold/testsuite/icf_test.cc:32:5: error: infinite recursion detected [-Werror=infinite-recursion]
+ 32 | int kept_func()
+ | ^~~~~~~~~
+
+ * testsuite/icf_test.cc: Avoid infinite recursion error.
+
+2022-01-05 GDB Administrator <gdbadmin@sourceware.org>
+
+ Automatic date update in version.in
+
+2022-01-04 H.J. Lu <hjl.tools@gmail.com>
+
+ ld/x86: Update -z report-relative-reloc
+ Use 0x%v, instead of bfd_sprintf_vma, to report relative relocations.
+ Change linker relative relocations report from
+
+ tmpdir/dump: R_X86_64_IRELATIVE (offset: 0x0000000000002000, info: 0x0000000000000025, addend: 0x0000000000001007) against 'ifunc' for section '.data.rel.ro.local' in tmpdir/report-reloc-1.o
+
+ to
+
+ tmpdir/dump: R_X86_64_IRELATIVE (offset: 0x2000, info: 0x25, addend: 0x1007) against 'ifunc' for section '.data.rel.ro.local' in tmpdir/report-reloc-1.o
+
+ bfd/
+
+ * elfxx-x86.c (_bfd_x86_elf_link_report_relative_reloc): Use
+ 0x%v instead of bfd_sprintf_vma.
+
+ ld/
+
+ * testsuite/ld-i386/report-reloc-1.l: Updated.
+ * testsuite/ld-x86-64/report-reloc-1.l: Likewise.
+
+2022-01-04 H.J. Lu <hjl.tools@gmail.com>
+
+ ld: Improve thin archive member error message
+ Improve thin archive member error message with:
+
+ ld: libbar.a(bar.o): error opening thin archive member: No such file or directory
+
+ instead of
+
+ ld: libbar.a: error adding symbols: No such file or directory
+
+ PR ld/28722
+ * archive.c (_bfd_get_elt_at_filepos): Add a pointer argument
+ for struct bfd_link_info. Call linker callback when failing to
+ open thin archive member.
+ (_bfd_generic_get_elt_at_index): Pass NULL to
+ _bfd_get_elt_at_filepos.
+ (bfd_generic_openr_next_archived_file): Likewise.
+ * coff-alpha.c (alpha_ecoff_get_elt_at_filepos): Add a pointer
+ argument for struct bfd_link_info and pass it to
+ _bfd_get_elt_at_filepos.
+ (alpha_ecoff_openr_next_archived_file): Pass NULL to
+ _bfd_get_elt_at_filepos.
+ (alpha_ecoff_get_elt_at_index): Likewise.
+ * coff-rs6000.c (_bfd_xcoff_openr_next_archived_file): Likewise.
+ * ecoff.c (ecoff_link_add_archive_symbols): Pass info to
+ backend->get_elt_at_filepos.
+ * elflink.c (elf_link_is_defined_archive_symbol): info to
+ _bfd_get_elt_at_filepos.
+ * libbfd-in.h (_bfd_get_elt_at_filepos): Add a pointer argument
+ for struct bfd_link_info.
+ * libbfd.h: Regenerate.
+ * libecoff.h (ecoff_backend_data): Add a pointer argument for
+ struct bfd_link_info to get_elt_at_filepos.
+ * linker.c (_bfd_generic_link_add_archive_symbols): Pass info to
+ _bfd_get_elt_at_filepos.
+
+2022-01-04 Lancelot SIX <lancelot.six@amd.com>
+
+ gdb/testsuite: fix inferior-clone.exp for native-extended-gdbserver
+ 003aae076207dbf32f98ba846158fc32669ef85f (gdb: Copy inferior properties
+ in clone-inferior) introduced a testcase that fails when testing with
+ the native-extended-gdbserver board:
+
+ Running ../gdb/testsuite/gdb.base/inferior-clone.exp ...
+ FAIL: gdb.base/inferior-clone.exp: inferior 2: clone-inferior
+ FAIL: gdb.base/inferior-clone.exp: inferior 3: clone-inferior
+
+ The error is as follows:
+
+ clone-inferior
+ [New inferior 2]
+ Added inferior 2 on connection 1 (extended-remote localhost:2346)
+ (gdb) FAIL: gdb.base/inferior-clone.exp: inferior 2: clone-inferior
+
+ This fails because the testcase only expect the 'Added inferior 2' part
+ of the message. The 'on connection 1 [...]' part is unexpected.
+
+ Fix by adjusting the testcase to a account for the possible trailing
+ part of the message.
+
+ Tested on x86_64-linux with native-extende-gdbserver and unix boards.
+
+ Change-Id: Ie3d6f04c9ffe9cab1fbda8ddf4935ee09b858c7a
+
+2022-01-04 Nick Clifton <nickc@redhat.com>
+
+ Add ATTRIBUTE_UNUSED to load_build_id_debug_file()'s main_filename parameter.
+
+2022-01-04 Andrew Burgess <aburgess@redhat.com>
+
+ gdb: don't pass nullptr to sigwait
+ I tried building GDB on GNU/Hurd, and ran into this warning:
+
+ gdbsupport/scoped_ignore_signal.h:78:16: error: null argument where non-null required (argument 2) [-Werror=nonnull]
+
+ This is because in this commit:
+
+ commit 99624310dd82542c389c89c2e55d8cae36bb74e1
+ Date: Sun Jun 27 15:13:14 2021 -0400
+
+ gdb: fall back on sigpending + sigwait if sigtimedwait is not available
+
+ A call to sigwait was introduced that passes nullptr as the second
+ argument, this call is only reached if sigtimedwait is not supported.
+
+ The original patch was written for macOS, I assume on that target
+ passing nullptr as the second argument is fine.
+
+ On my GNU/Linux box, the man-page for sigwait doesn't mention that
+ nullptr is allowed for the second argument, so my assumption would be
+ that nullptr is not OK, and, if I change the '#ifdef
+ HAVE_SIGTIMEDWAIT' introduced by the above patch to '#if 0', and
+ rebuild on GNU/Linux, I see the same warning that I see on GNU/Hurd.
+
+ I propose that we stop passing nullptr as the second argument to
+ sigwait, and instead pass a valid int pointer. The value returned in
+ the int can then be used in an assert.
+
+ For testing, I (locally) made the change to the #ifdef I mentioned
+ above, compiled GDB, and ran the usual tests, this meant I was using
+ sigwait instead on sigtimedwait on GNU/Linux, I saw no regressions.
+
+2022-01-04 Nick Clifton <nickc@redhat.com>
+
+ Remove a spurious debugging message.
+ PR 28716
+ * dwarf.c (load_build_id_debug_file): Remove spurious printf.
+
+2022-01-04 Tom de Vries <tdevries@suse.de>
+
+ [gdb/build] Fix build breaker in gdb/cli/cli-logging.c
+ Fix build breaker in gdb/cli/cli-logging.c:
+ ...
+ gdb/cli/cli-logging.c: In function \
+ ‘void show_logging_enabled(ui_file*, int, cmd_list_element*, const char*)’:
+ gdb/gdbsupport/gdb_locale.h:28:28: error: cannot convert ‘char*’ to ‘ui_file*’
+ 28 | # define _(String) gettext (String)
+ | ~~~~~~~~^~~~~~~~
+ | |
+ | char*
+ gdb/cli/cli-logging.c:202:25: note: in expansion of macro ‘_’
+ 202 | fprintf_unfiltered (_("on: Logging is enabled.\n"));
+ | ^
+ ...
+
+ Build and tested on x86_64-linux.
+
+ Fixes: 45aec4e5ed8 ("[gdb/cli] Improve show logging output")
+
+2022-01-04 Jan Beulich <jbeulich@suse.com>
+
+ x86/Intel: correct VFPCLASSP{S,D} handling when displacement is present
+ fits_in_disp8() can be called before ambiguous operands get resolved
+ or rejected (in process_suffix()), which requires that i.memshift be
+ non-negative to avoid an internal error. This case wasn't covered by
+ 6c0946d0d28d ("x86: correct VFPCLASSP{S,D} operand size handling").
+
+2022-01-04 Jan Beulich <jbeulich@suse.com>
+
+ gas: rework handling of backslashes in quoted symbol names
+ Strange effects can result from the present handling, e.g.:
+
+ .if 1
+ "backslash\\":
+ .endif
+
+ yields first (correctly) "missing closing `"'" but then also "invalid
+ character '\' in mnemonic" and further "end of file inside conditional".
+ Symbols names ending in \ are in principle not expressable with that
+ scheme.
+
+ Instead of recording whether a backslash was seen, inspect the
+ subsequent character right away. Only accept \\ (meaning a single
+ backslash in the resulting symbol name) and \" (meaning an embedded
+ double quote in the resulting symbol name) for now, warning about any
+ other combination.
+
+ While perhaps not necessary immediately, also permit concatenated
+ strings to form a symbol name. This may become useful if going forward
+ we would want to support \<octal> or \x<hex> sequences, where closing
+ and re-opening quotes can be useful to delimit such sequences.
+
+ The ELF "Multibyte symbol names" test gets switched away from using
+ .set, as that would now also mean excluding nios2 and pru. By using
+ .equiv instead, even the existing #notarget can be dropped. (For h8300
+ the .section directive additionally needs attributes specified, to avoid
+ a target specific warning.)
+
+2022-01-04 GDB Administrator <gdbadmin@sourceware.org>
+
+ Automatic date update in version.in
+
+2022-01-03 Tom de Vries <tdevries@suse.de>
+
+ [gdb/cli] Improve show logging output
+ Before commit 3b6acaee895 "Update more calls to add_prefix_cmd" we had the
+ following output for "show logging":
+ ...
+ $ gdb -q -batch -ex "set trace-commands on" \
+ -ex "set logging off" \
+ -ex "show logging" \
+ -ex "set logging on" \
+ -ex "show logging"
+ +set logging off
+ +show logging
+ Future logs will be written to gdb.txt.
+ Logs will be appended to the log file.
+ Output will be logged and displayed.
+ Debug output will be logged and displayed.
+ +set logging on
+ +show logging
+ Currently logging to "gdb.txt".
+ Logs will be appended to the log file.
+ Output will be logged and displayed.
+ Debug output will be logged and displayed.
+ ...
+
+ After that commit we have instead:
+ ...
+ +set logging off
+ +show logging
+ debugredirect: The logging output mode is off.
+ file: The current logfile is "gdb.txt".
+ overwrite: Whether logging overwrites or appends to the log file is off.
+ redirect: The logging output mode is off.
+ +set logging on
+ +show logging
+ debugredirect: The logging output mode is off.
+ file: The current logfile is "gdb.txt".
+ overwrite: Whether logging overwrites or appends to the log file is off.
+ redirect: The logging output mode is off.
+ ...
+ which gives less clear output for some subcommands.
+
+ OTOH, it's explicit about whether boolean values are on or off.
+
+ The new text seems to have been chosen to match the set/show help texts:
+ ...
+ (gdb) help show logging
+ Show logging options.
+
+ List of show logging subcommands:
+
+ show logging debugredirect -- Show the logging debug output mode.
+ show logging file -- Show the current logfile.
+ show logging overwrite -- \
+ Show whether logging overwrites or appends to the log file.
+ show logging redirect -- Show the logging output mode.
+ ...
+
+ Make the show logging messages more clear, while still keep the boolean
+ values explicit, such that we have:
+ ...
+ $ ./gdb.sh -q -batch -ex "show logging"
+ logging debugredirect: off: \
+ Debug output will go to both the screen and the log file.
+ logging enabled: off: Logging is disabled.
+ logging file: The current logfile is "gdb.txt".
+ logging overwrite: off: Logging appends to the log file.
+ logging redirect: off: Output will go to both the screen and the log file.
+ ...
+
+ Tested on x86_64-linux.
+
+2022-01-03 Tom Tromey <tromey@adacore.com>
+
+ Fix use of 'printf' in gdbtypes.c
+ An earlier patch of mine, commit 64b7cc50 ("Remove
+ gdb_print_host_address") inadvertently changed a function in
+ gdbtypes.c to use printf rather than printf_filtered. This patch
+ fixes the problem.
+
+ Fix regression in page-logging.exp
+ Simon and Tom pointed out that page-logging.exp failed on their
+ machines. Tom tracked this down to the "width" setting. Since
+ there's no need in the test to change the width, it seems simplest to
+ remove the setting. I confirmed that the test still fails if the fix
+ is backed out, ensuring that the test is still testing what it
+ purports to.
+
+ Small indentation fix in eval.c
+ I noticed that the AdaCore tree had a small divergence in eval.c -- it
+ had a fix for an indentation problem in binop_promote. I'm checking
+ in this small fix as obvious.
+
+2022-01-03 Tom de Vries <tdevries@suse.de>
+
+ [gdb/testsuite] Handle for loop initial decl with gcc 4.8.5
+ When running test-case gdb.threads/schedlock-thread-exit.exp on a system with
+ system compiler gcc 4.8.5, I run into:
+ ...
+ src/gdb/testsuite/gdb.threads/schedlock-thread-exit.c:33:3: error: \
+ 'for' loop initial declarations are only allowed in C99 mode
+ ...
+
+ Fix this by:
+ - using -std=c99, or
+ - using -std=gnu99, in case that's required, or
+ - in the case of the jit test-cases, rewriting the for loops.
+
+ Tested on x86_64-linux, both with gcc 4.8.5 and gcc 7.5.0.
+
+2022-01-03 GDB Administrator <gdbadmin@sourceware.org>
+
+ Automatic date update in version.in
+
+2022-01-02 Tom Tromey <tom@tromey.com>
+
+ Update copying.awk for _initialize declaration patch
+ Commit 6c265988 ("gdb: add back declarations for _initialize
+ functions") modified copying.c, but not copying.awk. This patch
+ updates copying.awk to backport the appropriate fix. This way, if
+ copying.awk is run again, it will create the correct output.
+
+ I'm checking this in as obvious.
+
+2022-01-02 Tom Tromey <tom@tromey.com>
+
+ Use filtered output in print_i387_ext
+ print_i387_ext mostly uses filtered output, but one call in the middle
+ of the function uses the _unfiltered form. This patch fixes this
+ call. I'm checking this in as obvious.
+
+2022-01-02 Alan Modra <amodra@gmail.com>
+
+ Update year range in copyright notice of binutils files
+ The result of running etc/update-copyright.py --this-year, fixing all
+ the files whose mode is changed by the script, plus a build with
+ --enable-maintainer-mode --enable-cgen-maint=yes, then checking
+ out */po/*.pot which we don't update frequently.
+
+ The copy of cgen was with commit d1dd5fcc38ead reverted as that commit
+ breaks building of bfp opcodes files.
+
+2022-01-02 GDB Administrator <gdbadmin@sourceware.org>
+
+ Automatic date update in version.in
+
+2022-01-01 Mike Frysinger <vapier@gentoo.org>
+
+ gdb: copyright: fix a few comment typos
+
+ sim: ppc: drop natural types
+ These are almost entirely unused. For the very few places using them,
+ replace with explicit signed types. This matches what was done in the
+ common sim code.
+
+ sim: mips: clean up bad style/whitespace
+ This doesn't fix all the problems, but grabs a bunch of the more
+ obvious ones.
+
+ sim: tweak copyright lines for gnulib update-copyright
+ The regex it uses does not like so many leading spaces which causes
+ it to think the files lack copyright. Trim them down so the script
+ can find & update them accordingly.
+
+ gdb: update sim mips testsuite copyright exemption
+ The sim testsuite was reorganized last year, so update the path.
+
+2022-01-01 Mike Frysinger <vapier@gentoo.org>
+
+ unify 64-bit bfd checks
+ Move the 64-bit bfd logic out of bfd/configure.ac and into bfd64.m4
+ under config so it can be shared between all the other subdirs.
+
+ This replaces want64 with enable_64_bit_bfd which was already being
+ declared, but not used directly.
+
+2022-01-01 Joel Brobecker <brobecker@adacore.com>
+
+ Update Copyright year in gdb/testsuite/gdb.arch/powerpc-power10.exp
+ This commit updates the copyright year range in the script
+ gdb/testsuite/gdb.arch/powerpc-power10.exp. The update was
+ performed by running gdb/copyright.py again, to make sure
+ that the copyright year range will be automatically updated
+ in years forward.
+
+2022-01-01 Joel Brobecker <brobecker@adacore.com>
+
+ Fix copyright header in gdb/testsuite/gdb.arch/powerpc-power10.exp
+ The copyright year and holder line is slight malformed, missing
+ a space after a comma, and this is sufficient for gdb's
+ copyright.py script to miss this file during its automated
+ copyright year update.
+
+ This commit fixes this.
+
+2022-01-01 Joel Brobecker <brobecker@adacore.com>
+
+ gdb/copyright.py: Add update-netbsd.sh to MULTIPLE_COPYRIGHT_HEADERS
+ Add gdb/syscalls/update-netbsd.sh to the reminder printed
+ at the end of the execution listing all the files where
+ a manual update of the copyright header is needed. This
+ scripts contains some inline code which includes a copyright
+ header.
+
+ Manual copyright year update of various GDB files
+ This commit updates the copyright year in some files where
+ we have a copyright year outside of the copyright year,
+ and thus are not included in gdb's copyright.py script.
+
+2022-01-01 Joel Brobecker <brobecker@adacore.com>
+
+ Automatic Copyright Year update after running gdb/copyright.py
+ This commit brings all the changes made by running gdb/copyright.py
+ as per GDB's Start of New Year Procedure.
+
+ For the avoidance of doubt, all changes in this commits were
+ performed by the script.
+
+2022-01-01 Joel Brobecker <brobecker@adacore.com>
+
+ Update Copyright Year in gdb, gdbserver and gdbreplay version output
+ This commit changes the copyright year printed by gdb, gdbserver
+ and gdbreplay when printing the tool's version.
+
+2022-01-01 Alan Modra <amodra@gmail.com>
+
+ ubsan: next_char_of_string signed integer overflow
+ Squash another totally useless fuzz report that I should have ignored.
+
+ * read.c (next_char_of_string): Avoid integer overflow.
+
+2022-01-01 Alan Modra <amodra@gmail.com>
+
+ ubsan: bfd_mach_o_build_commands shift exponent 64 is too large
+ * mach-o.c (bfd_mach_o_read_section_32): Limit alignment further.
+ (bfd_mach_o_read_section_64): Likewise.
+
+2022-01-01 Alan Modra <amodra@gmail.com>
+
+ ubsan: signed integer multiply overflow
+ 9223371018427387904 * 2 cannot be represented in type 'long', yes, but
+ we don't care.
+
+ * expr.c (expr): Avoid signed overflow.
+
+2022-01-01 Alan Modra <amodra@gmail.com>
+
+ asan: Null-dereference in _bfd_xcoff_copy_private_bfd_data
+ sec->output_section will be NULL when objcopy removes sections.
+
+ * coff-rs6000.c (_bfd_xcoff_copy_private_bfd_data): Protect against
+ objcopy removing sections.
+
+2022-01-01 Alan Modra <amodra@gmail.com>
+
+ ubsan: integer overflow in section filepos subtraction
+ * elf.c (assign_file_positions_for_non_load_sections): Avoid
+ signed integer overflow.
+
+2022-01-01 Alan Modra <amodra@gmail.com>
+
+ Remove unnecessary ELF_MINPAGESIZE defines
+ The idea of this patch is to make it easy to see which targets (just
+ sparc) have ELF_MINPAGESIZE != ELF_COMMONPAGESIZE.
+
+ * elf32-arm.c (ELF_MINPAGESIZE): Don't define.
+ * elf32-metag.c: Likewise.
+ * elfnn-aarch64.c: Likewise.
+ * elf64-x86-64.c: Likewise. Also don't redefine a bunch of other
+ macros for l1om elf64-target.h use that are unchanged from default.
+
+2022-01-01 H.J. Lu <hjl.tools@gmail.com>
+
+ ld-x86-64: Pass options to linker with "-Wl,"
+ * testsuite/ld-x86-64/x86-64.exp: Pass options to linker with
+ "-Wl,".
+
+2022-01-01 GDB Administrator <gdbadmin@sourceware.org>
+
+ Automatic date update in version.in
+
+2021-12-31 Tom Tromey <tom@tromey.com>
+
+ Do not call reinitialize_more_filter from avr_io_reg_read_command
+ avr_io_reg_read_command is an ordinary gdb command, and so should not
+ be calling reinitialize_more_filter. This patch removes it. I'm
+ checking this in as obvious. Tested by rebuilding.
+
+2021-12-31 H.J. Lu <hjl.tools@gmail.com>
+
+ x86: Define check_relocs_failed in elfxx-x86.h
+ * elf32-i386.c (check_relocs_failed): Moved to ...
+ * elfxx-x86.h (check_relocs_failed): Here. New.
+ * elf64-x86-64.c (check_relocs_failed): Removed.
+
+ Define X86_PCREL_TYPE_P/X86_SIZE_TYPE_P in elfxx-x86.h
+ * elf32-i386.c: Don't include "elf/i386.h".
+ (X86_PCREL_TYPE_P): Removed.
+ (X86_SIZE_TYPE_P): Likewise.
+ (elf_i386_check_relocs): Pass false to NEED_DYNAMIC_RELOCATION_P.
+ (elf_i386_relocate_section): Pass false to
+ GENERATE_DYNAMIC_RELOCATION_P and COPY_INPUT_RELOC_P.
+ * elf64-x86-64.c: Don't include "elf/x86-64.h".
+ (X86_PCREL_TYPE_P): Removed.
+ (X86_SIZE_TYPE_P): Likewise.
+ (elf_x86_64_check_relocs): Pass true to NEED_DYNAMIC_RELOCATION_P
+ and X86_PCREL_TYPE_P.
+ (elf_x86_64_relocate_section): Pass true to X86_PCREL_TYPE_P,
+ X86_SIZE_TYPE_P, GENERATE_DYNAMIC_RELOCATION_P and
+ COPY_INPUT_RELOC_P.
+ * elfxx-x86.c: Don't include "elf/i386.h" nor "elf/x86-64.h".
+ * elfxx-x86.h (X86_64_PCREL_TYPE_P): New.
+ (I386_PCREL_TYPE_P): Likewise.
+ (X86_PCREL_TYPE_P): Likewise.
+ (X86_64_SIZE_TYPE_P): Likewise.
+ (I386_SIZE_TYPE_P): Likewise.
+ (X86_SIZE_TYPE_P): Likewise.
+ (NEED_DYNAMIC_RELOCATION_P): Add IS_X86_64 and pass it to
+ X86_PCREL_TYPE_P.
+ (COPY_INPUT_RELOC_P): Likewise.
+ (GENERATE_DYNAMIC_RELOCATION_P): Add IS_X86_64, pass it to
+ X86_PCREL_TYPE_P and X86_SIZE_TYPE_P.
+
+2021-12-31 Tamar Christina <tamar.christina@arm.com>
+
+ ld: fix coff PE SEH
+ COFF_WITH_pex64 and COFF_WITH_peAArch64 can't be true at the same time.
+ That means that two conditionals that control the sorting of the .pdata section
+ became a falsum.
+
+ The testsuite doesn't catch this because the linker does the sorting and to link
+ you require library support from the unwinder so we can't test from binutils in
+ isolation.
+
+ bfd/ChangeLog:
+
+ 2021-12-31 Tamar Christina <tamar.christina@arm.com>
+
+ PR ld/28682
+ * peXXigen.c: Fix conditional.
+
+2021-12-31 GDB Administrator <gdbadmin@sourceware.org>
+
+ Automatic date update in version.in
+
+2021-12-30 GDB Administrator <gdbadmin@sourceware.org>
+
+ Automatic date update in version.in
+
+2021-12-29 Tom Tromey <tom@tromey.com>
+
+ Use filtered output in show callbacks
+ "show" command callbacks, like most ordinary gdb commands, should use
+ filtered output. I found a few that did not, so this patch changes
+ them to use the filtered form.
+
+2021-12-29 Tom Tromey <tom@tromey.com>
+
+ Consistently Use ui_file parameter to show callbacks
+ I happened to notice that one "show" callback was printing to
+ gdb_stdout rather than to the passed-in ui_file parameter. I went
+ through all such callbacks and fixed them to consistently use the
+ ui_file.
+
+ Regression tested on x86-64 Fedora 34.
+
+2021-12-29 Tom Tromey <tom@tromey.com>
+
+ Use gdb_stdlog for MI debugging
+ When MI debugging is enabled, the logging output should be sent to
+ gdb_stdlog. This is part of PR gdb/7233.
+
+ Bug: https://sourceware.org/bugzilla/show_bug.cgi?id=7233
+
+2021-12-29 Tom Tromey <tom@tromey.com>
+
+ Use debug_prefixed_printf_cond_nofunc in index-cache
+ This changes index-cache.c to use debug_prefixed_printf_cond_nofunc.
+ As a side effect, logs are now written to gdb_stdlog. This is part of
+ PR gdb/7233.
+
+ Bug: https://sourceware.org/bugzilla/show_bug.cgi?id=7233
+
+2021-12-29 Tom Tromey <tom@tromey.com>
+
+ Send minsym logging to gdb_stdlog
+ This changes minsyms.c to send logging output to gdb_stdlog. This is
+ part of PR gdb/7233.
+
+ Bug: https://sourceware.org/bugzilla/show_bug.cgi?id=7233
+
+2021-12-29 Tom Tromey <tom@tromey.com>
+
+ Use gdb_stdlog for separate debug file logging
+ This changes the separate debug file logging code (spread across two
+ files) to use gdb_stdlog for its output. This is part of PR gdb/7233.
+
+ Bug: https://sourceware.org/bugzilla/show_bug.cgi?id=7233
+
+2021-12-29 Tom Tromey <tom@tromey.com>
+
+ Use debug_prefixed_printf_cond_nofunc in machoread
+ This changes machoread.c to use debug_prefixed_printf_cond_nofunc. As
+ a side effect, the logs are now written to gdb_stdlog. This is part
+ of PR gdb/7233.
+
+ Bug: https://sourceware.org/bugzilla/show_bug.cgi?id=7233
+
+2021-12-29 Tom Tromey <tom@tromey.com>
+
+ Use debug_prefixed_printf_cond_nofunc in microblaze.c
+ This changes microblaze.c to use the standard logging macro. As a
+ side effect, logs will now go to gdb_stdlog. This is part of PR gdb/7233.
+
+ Bug: https://sourceware.org/bugzilla/show_bug.cgi?id=7233
+
+2021-12-29 Tom Tromey <tom@tromey.com>
+
+ Send debugging data to gdb_stdlog in mips-linux-nat.c
+ This changes mips-linux-nat.c to send some logging output to
+ gdb_stdlog, rather than stdout. This is part of PR gdb/7233.
+
+ Bug: https://sourceware.org/bugzilla/show_bug.cgi?id=7233
+
+2021-12-29 Tom Tromey <tom@tromey.com>
+
+ Send arch-utils error messages to gdb_stderr
+ This changes arch-utils.c to send some error messages to gdb_stderr.
+ This is part of PR gdb/7233.
+
+ Bug: https://sourceware.org/bugzilla/show_bug.cgi?id=7233
+
+2021-12-29 Tom Tromey <tom@tromey.com>
+
+ Use correct stream for process record output
+ The process record code often emits unfiltered output. In some cases,
+ this output ought to go to gdb_stderr (but see below). In other
+ cases, the output is guarded by a logging variable and so ought to go
+ to gdb_stdlog. This patch makes these changes.
+
+ Note that in many cases, the output to stderr is followed by a
+ "return -1", which is how process record indicates an error. It seems
+ to me that calling error here would be preferable, because, in many
+ cases, that's all the caller does when it sees a -1. However, I
+ haven't made this change.
+
+ This is part of PR gdb/7233.
+
+ Bug: https://sourceware.org/bugzilla/show_bug.cgi?id=7233
+
+2021-12-29 Tom Tromey <tom@tromey.com>
+
+ Send jit.c errors to gdb_stderr
+ jit.c writes some error messages to gdb_stdout, but using gdb_stderr
+ is better. This is part of PR gdb/7233.
+
+ Bug: https://sourceware.org/bugzilla/show_bug.cgi?id=7233
+
+2021-12-29 Tom Tromey <tom@tromey.com>
+
+ Fix logging redirection bug with pager
+ I noticed yesterday that if gdb output is redirected to a file, the
+ pager will still be active. This is irritating, because the output
+ isn't actually visible -- just the pager prompt. Looking in bugzilla,
+ I found that this had been filed 17 years ago, as PR cli/8798.
+
+ This patch fixes the bug. It changes the pagination code to query the
+ particular ui-file to see if paging is allowable. The ui-file
+ implementations are changed so that only the stdout implementation and
+ a tee (where one sub-file is stdout) can page.
+
+ Regression tested on x86-64 Fedora 34.
+
+ Bug: https://sourceware.org/bugzilla/show_bug.cgi?id=8798
+
+2021-12-29 Tom Tromey <tom@tromey.com>
+
+ Remove unusual use of core_addr_eq and core_addr_hash
+ gdbtypes.h uses core_addr_eq and core_addr_hash in a weird way: taking
+ the address of a member and then passing this (as a void*) to these
+ functions.
+
+ It seems better to simply inline the ordinary code here. CORE_ADDR is
+ a scalar so it can be directly compared, and the identity hash
+ function seems safe to assume as well.
+
+ After this, core_addr_eq and core_addr_hash are unused, so this patch
+ removes them.
+
+2021-12-29 Lancelot SIX <lancelot.six@amd.com>
+
+ gdb: Copy inferior properties in clone-inferior
+ This commit ensures that the following settings are cloned from one
+ inferior to the new one when processing the clone-inferior command:
+ - inferior-tty
+ - environment variables
+ - cwd
+ - args
+
+ Some of those parameters can be passed as command line arguments to GDB
+ (-args and -tty), so one could expect the clone-inferior to respect
+ those flags. The following debugging session illustrates that:
+
+ gdb -nx -quiet -batch \
+ -ex "show args" \
+ -ex "show inferior-tty" \
+ -ex "clone-inferior" \
+ -ex "inferior 2" \
+ -ex "show args" \
+ -ex "show inferior-tty" \
+ -tty=/some/tty \
+ -args echo foo bar
+ Argument list to give program being debugged when it is started is "foo bar".
+ Terminal for future runs of program being debugged is "/some/tty".
+ [New inferior 2]
+ Added inferior 2.
+ [Switching to inferior 2 [<null>] (/bin/echo)]
+ Argument list to give program being debugged when it is started is "".
+ Terminal for future runs of program being debugged is "".
+
+ The other properties this commit copies on clone (i.e. CWD and the
+ environment variables) are included since they are related (in the sense
+ that they influence the runtime behavior of the program) even if they
+ cannot be directly set using command line switches.
+
+ There is a chance that this patch changes existing user workflow. I
+ think that this change is mostly harmless. If users want to start a new
+ inferior based on an existing one, they probably already propagate those
+ settings to the new inferior in some way.
+
+ Tested on x86_64-linux.
+
+ Change-Id: I3b1f28b662f246228b37bb24c2ea1481567b363d
+
+2021-12-29 GDB Administrator <gdbadmin@sourceware.org>
+
+ Automatic date update in version.in
+
+2021-12-28 H.J. Lu <hjl.tools@gmail.com>
+
+ elf32-i386: Fix a typo in GOT comments
+ Entry offsets in the global offset table are multiples of 4, not 8.
+
+ * elf32-i386.c (elf_i386_relocate_section): Fix a typo in GOT
+ comments.
+
+2021-12-28 H.J. Lu <hjl.tools@gmail.com>
+
+ bfd: Don't check non-thin archive member file size
+ There is no need to check member file size for thin archive member.
+
+ * bfdio.c (bfd_bread): Don't check non-thin archive member file
+ size.
+
+2021-12-28 Alan Modra <amodra@gmail.com>
+
+ gas reloc sorting
+ In some cases, eg. riscv_pre_output_hook, gas generates out-of-order
+ relocations. Various places in the linker assume relocs are sorted
+ by increasing r_offset, which is normally the case. Provide
+ GAS_SORT_RELOCS to handle unsorted relocs.
+
+ bfd/
+ PR 28709
+ * elf32-nds32.c (nds32_insertion_sort): Make static.
+ * elf32-nds32.h (nds32_insertion_sort): Delete declaration.
+ gas/
+ PR 28709
+ * write.c (write_relocs): Implement reloc sorting by r_offset
+ when GAS_SORT_RELOCS.
+ * config/tc-nds32.c (compar_relent, nds32_set_section_relocs): Delete.
+ * config/tc-nds32.h (nds32_set_section_relocs): Don't declare.
+ (SET_SECTION_RELOCS): Don't define.
+ (GAS_SORT_RELOCS): Define.
+ * config/tc-riscv.h (GAS_SORT_RELOCS): Define.
+
+2021-12-28 jiawei <jiawei@iscas.ac.cn>
+
+ ld: Fix testcase errors due to -shared not support.
+ Reviewed-by: Jim Wilson <jim.wilson.gcc@gmail.com>
+
+ ld/ChangeLog:
+
+ * testsuite/ld-ctf/ctf.exp: Add shared lib check.
+ * testsuite/ld-plugin/lto.exp: Add lto shared check.
+
+2021-12-28 GDB Administrator <gdbadmin@sourceware.org>
+
+ Automatic date update in version.in
+
+2021-12-27 H.J. Lu <hjl.tools@gmail.com>
+
+ elf: Update comments for check_relocs in elf_backend_data
+ Since
+
+ commit 5c3261b0e834647cf9eb555320e20871b7854f98
+ Author: H.J. Lu <hjl.tools@gmail.com>
+ Date: Mon Oct 16 03:49:54 2017 -0700
+
+ ELF: Call check_relocs after opening all inputs
+
+ check_relocs is called after opening all inputs.
+
+ * elf-bfd.h (elf_backend_data::check_relocs): Update comments.
+
+2021-12-27 H.J. Lu <hjl.tools@gmail.com>
+
+ ld: Remove emultempl/linux.em
+ Remove emultempl/linux.em whose last usage was removed by
+
+ commit c65c21e1ffd1e02d9970a4bca0b7e384788a50f0
+ Author: Alan Modra <amodra@gmail.com>
+ Date: Mon Apr 16 22:14:01 2018 +0930
+
+ various i386-aout and i386-coff target removal
+
+ Also tidies some other aout leftovers in binutils-common.exp.
+
+2021-12-27 GDB Administrator <gdbadmin@sourceware.org>
+
+ Automatic date update in version.in
+
+2021-12-26 GDB Administrator <gdbadmin@sourceware.org>
+
+ Automatic date update in version.in
+
+2021-12-25 GDB Administrator <gdbadmin@sourceware.org>
+
+ Automatic date update in version.in
+
+2021-12-24 Tom Tromey <tom@tromey.com>
+
+ Remove gdb_print_host_address
+ gdb_print_host_address is just a simple wrapper around
+ fprintf_filtered. However, it is readily replaced in all callers by a
+ combination of %s and call to host_address_to_string. This also
+ simplifies the code, so I think it's worthwhile to remove this
+ function.
+
+ Regression tested on x86-64 Fedora 64.
+
+2021-12-24 Tom Tromey <tom@tromey.com>
+
+ Move gdb_bfd_errmsg to gdb_bfd.c
+ gdb_bfd.c contains most of gdb's BFD-related utility functions.
+ However, gdb_bfd_errmsg is in utils.c. It seemed better to me to move
+ this out of util.[ch] and into the BFD-related file instead.
+
+ Tested by rebuilding.
+
+2021-12-24 Nelson Chu <nelson.chu@sifive.com>
+
+ RISC-V: Rewrite the csr testcases.
+ Maskray (Fangrui Song) had suggested me before that we should combine
+ multiple testcases into one file as possible as we can. So that we can
+ more easily understand what these test cases are testing, and easier to
+ maintain. Therefore, this patch rewrites all csr testcases, to make them
+ more clean.
+
+ gas/
+ * testsuite/gas/riscv/csr-fail-nonexistent.d: Renamed from
+ priv-reg-fail-nonexistent testcase.
+ * testsuite/gas/riscv/csr-fail-nonexistent.: Likewise.
+ * testsuite/gas/riscv/csr-fail-nonexistent.s: Likewise.
+ * testsuite/gas/riscv/csr-insns-pseudo-noalias.d: Renamed from
+ priv-reg-pseudo testcase.
+ * testsuite/gas/riscv/csr-insns-pseudo.d: Likewise.
+ * testsuite/gas/riscv/csr-insns-pseudo.s: Likewise.
+ * testsuite/gas/riscv/csr-insns-read-only.d: Renamed from
+ priv-reg-fail-read-only-02 testcase.
+ * testsuite/gas/riscv/csr-insns-read-only.l: Likewise.
+ * testsuite/gas/riscv/csr-insns-read-only.s: Likewise.
+ * testsuite/gas/riscv/h-ext-32.d: Moved hypervisor csrs to csr.s.
+ * testsuite/gas/riscv/h-ext-32.s: Likewise.
+ * testsuite/gas/riscv/h-ext-64.d: Likewise.
+ * testsuite/gas/riscv/h-ext-64.s: Likewise.
+ * testsuite/gas/riscv/csr.s: Renamed from priv-reg.s, and then
+ added the hypervisor csrs.
+ * testsuite/gas/riscv/csr-version-1p9p1.d: The csr testcase when
+ the privileged spec is 1.9.1. Also tested all invalid csr warnings
+ when -mcsr-check is enabled.
+ * testsuite/gas/riscv/csr-version-1p9p1.l: Likewise.
+ * testsuite/gas/riscv/csr-version-1p10.d: Likewise, but the
+ privileged spec is 1.10..
+ * testsuite/gas/riscv/csr-version-1p10.l: Likewise.
+ * testsuite/gas/riscv/csr-version-1p11.d: Likewise, but the
+ privileged spec is 1.11.
+ * testsuite/gas/riscv/csr-version-1p11.l: Likewise.
+ * testsuite/gas/riscv/csr-version-1p12.d: Likewise, but the
+ privileged spec is 1.12.
+ * testsuite/gas/riscv/csr-version-1p12.l: Likewise.
+ * testsuite/gas/riscv/priv-reg*: Removed or Renamed.
+
+2021-12-24 Vineet Gupta <vineetg@rivosinc.com>
+
+ RISC-V: Hypervisor ext: support Privileged Spec 1.12
+ This is the Hypervisor Extension 1.0
+
+ - Hypervisor Memory-Management Instructions
+ HFENCE.VVMA, HFENCE.GVMA,
+
+ - Hypervisor Virtual Machine Load and Store Instructions
+ HLV.B, HLV.BU, HSV.B,
+ HLV.H, HLV.HU, HLVX.HU, HSB.H,
+ HLV.W, HLV.WU, HLVX.WU, HSV.W,
+ HLV.D, HSV.D
+
+ - Hypervisor CSRs (some new, some address changed)
+ hstatus, hedeleg, hideleg, hie, hcounteren, hgeie, htval, hip, hvip,
+ htinst, hgeip, henvcfg, henvcfgh, hgatp, hcontext, htimedelta, htimedeltah,
+ vsstatus, vsie, vstvec, vsscratch, vsepc, vscause, vstval, vsip, vsatp,
+
+ Note that following were added already as part of svinval extension
+ support:
+ HINVAL.GVMA, HINVAL.VVMA
+
+ Reviewed-by: Palmer Dabbelt <palmer@rivosinc.com>
+ Reviewed-by: Nelson Chu <nelson.chu@sifive.com>
+
+ bfd/
+ * cpu-riscv.c (riscv_priv_specs): Added entry for 1.12.
+ * cpu-riscv.h (enum riscv_spec_class): Added PRIV_SPEC_CLASS_1P12.
+ gas/
+ * config/tc-riscv.c (abort_version): Updated comment.
+ (validate_riscv_insn): Annotate switch-break.
+ * testsuite/gas/riscv/h-ext-32.d: New testcase for hypervisor.
+ * testsuite/gas/riscv/h-ext-32.s: Likewise.
+ * testsuite/gas/riscv/h-ext-64.d: Likewise.
+ * testsuite/gas/riscv/h-ext-64.s: Likewise.
+ include/
+ * opcode/riscv-opc.h: Added encodings for hypervisor csrs and
+ instrcutions.
+ opcodes/
+ * riscv-opc.c (riscv_opcodes): Added hypervisor instrcutions.
+
+2021-12-24 Vineet Gupta <vineetg@rivosinc.com>
+
+ RISC-V: Hypervisor ext: drop Privileged Spec 1.9.1 implementation/tests
+ This makes way for a clean 1.12 based Hypervisor Ext support.
+
+ There are no known implementors of 1.9.1 H-ext. (Per Jim, kendryte k210
+ is based on priv spec 1.9.1, but it seems unlikely that they implemented
+ H-ext).
+
+ Reviewed-by: Palmer Dabbelt <palmer@rivosinc.com>
+ Reviewed-by: Nelson Chu <nelson.chu@sifive.com>
+
+ gas/
+ * testsuite/gas/riscv/csr-dw-regnums.d: Drop the hypervisor csrs
+ defined in the privileged spec 1.9.1.
+ * testsuite/gas/riscv/csr-dw-regnums.s: Likewise.
+ * testsuite/gas/riscv/priv-reg-fail-read-only-01.s: Likewise.
+ * testsuite/gas/riscv/priv-reg-fail-version-1p10.l: Likewise.
+ * testsuite/gas/riscv/priv-reg-fail-version-1p11.l: Likewise.
+ * testsuite/gas/riscv/priv-reg-version-1p10.d: Likewise.
+ * testsuite/gas/riscv/priv-reg-version-1p11.d: Likewise.
+ * testsuite/gas/riscv/priv-reg-version-1p9p1.d: Likewise.
+ * testsuite/gas/riscv/priv-reg.s: Likewise.
+ include/
+ * opcode/riscv-opc.h: Drop the hypervisor csrs defined in the
+ privileged spec 1.9.1.
+
+2021-12-24 GDB Administrator <gdbadmin@sourceware.org>
+
+ Automatic date update in version.in
+
+2021-12-23 Andrew Burgess <aburgess@redhat.com>
+
+ gdb/testsuite: resolve some duplicate testnames in gdb.mi
+ Set of fixes to resolve some duplicate test names in the gdb.mi/
+ directory. There should be no real test changes after this set of
+ fixes, they are all either:
+
+ - Adding with_test_prefix type constructs to make test names unique,
+ or
+
+ - Changing the test name to be more descriptive, or better reflect
+ the test being run.
+
+2021-12-23 Andrew Burgess <andrew.burgess@embecosm.com>
+
+ gdb/remote: handle attach when stop packet lacks thread-id
+ Bug PR gdb/28405 reports a regression when using attach with an
+ extended-remote target. In this case the target is not including a
+ thread-id in the stop packet it sends back after the attach.
+
+ The regression was introduced with this commit:
+
+ commit 8f66807b98f7634c43149ea62e454ea8f877691d
+ Date: Wed Jan 13 20:26:58 2021 -0500
+
+ gdb: better handling of 'S' packets
+
+ The problem is that when GDB processes the stop packet, it sees that
+ there is no thread-id and so has to "guess" which thread the stop
+ should apply to.
+
+ In this case the target only has one thread, so really, there's no
+ guessing needed, but GDB still runs through the same process, this
+ shouldn't cause us any problems.
+
+ However, after the above commit, GDB now expects itself to be more
+ internally consistent, specifically, only a thread that GDB thinks is
+ resumed, can be a candidate for having stopped.
+
+ It turns out that, when GDB attaches to a process through an
+ extended-remote target, the threads of the process being attached too,
+ are not, initially, marked as resumed.
+
+ And so, when GDB tries to figure out which thread the stop might apply
+ too, it finds no threads in the processes marked resumed, and so an
+ assert triggers.
+
+ In extended_remote_target::attach we create a new thread with a call
+ to add_thread_silent, rather than remote_target::remote_add_thread,
+ the reason is that calling the latter will result in a call to
+ 'add_thread' rather than 'add_thread_silent'. However,
+ remote_target::remote_add_thread includes additional
+ actions (i.e. calling remote_thread_info::set_resumed and set_running)
+ which are missing from extended_remote_target::attach. These missing
+ calls are what would serve to mark the new thread as resumed.
+
+ In this commit I propose that we add an extra parameter to
+ remote_target::remote_add_thread. This new parameter will force the
+ new thread to be added with a call to add_thread_silent. We can now
+ call remote_add_thread from the ::attach method, the extra
+ actions (listed above) will now be performed, and the thread will be
+ left in the correct state.
+
+ Additionally, in PR gdb/28405, a segfault is reported. This segfault
+ triggers when 'set debug remote 1' is used before trying to reproduce
+ the original assertion failure. The cause of this is in
+ remote_target::select_thread_for_ambiguous_stop_reply, where we do
+ this:
+
+ remote_debug_printf ("first resumed thread is %s",
+ pid_to_str (first_resumed_thread->ptid).c_str ());
+ remote_debug_printf ("is this guess ambiguous? = %d", ambiguous);
+
+ gdb_assert (first_resumed_thread != nullptr);
+
+ Notice that when debug printing is on we dereference
+ first_resumed_thread before we assert that the pointer is not
+ nullptr. This is the cause of the segfault, and is resolved by moving
+ the assert before the debug printing code.
+
+ I've extended an existing test, ext-attach.exp, so that the original
+ test is run multiple times; we run in the original mode, as normal,
+ but also, we now run with different packets disabled in gdbserver. In
+ particular, disabling Tthread would trigger the assertion as it was
+ reported in the original bug. I also run the test in all-stop and
+ non-stop modes now for extra coverage, we also run the tests with
+ target-async enabled, and disabled.
+
+ Bug: https://sourceware.org/bugzilla/show_bug.cgi?id=28405
+
+2021-12-23 Andrew Burgess <aburgess@redhat.com>
+
+ gdb: on x86-64 non-trivial C++ objects are returned in memory
+ Fixes PR gdb/28681. It was observed that after using the `finish`
+ command an incorrect value was displayed in some cases. Specifically,
+ this behaviour was observed on an x86-64 target.
+
+ Consider this test program:
+
+ struct A
+ {
+ int i;
+
+ A ()
+ { this->i = 0; }
+ A (const A& a)
+ { this->i = a.i; }
+ };
+
+ A
+ func (int i)
+ {
+ A a;
+ a.i = i;
+ return a;
+ }
+
+ int
+ main ()
+ {
+ A a = func (3);
+ return a.i;
+ }
+
+ And this GDB session:
+
+ $ gdb -q ex.x
+ Reading symbols from ex.x...
+ (gdb) b func
+ Breakpoint 1 at 0x401115: file ex.cc, line 14.
+ (gdb) r
+ Starting program: /home/andrew/tmp/ex.x
+
+ Breakpoint 1, func (i=3) at ex.cc:14
+ 14 A a;
+ (gdb) finish
+ Run till exit from #0 func (i=3) at ex.cc:14
+ main () at ex.cc:23
+ 23 return a.i;
+ Value returned is $1 = {
+ i = -19044
+ }
+ (gdb) p a
+ $2 = {
+ i = 3
+ }
+ (gdb)
+
+ Notice how after the `finish` the contents of $1 are junk, but, when I
+ immediately ask for the value of `a`, I get back the correct value.
+
+ The problem here is that after the finish command GDB calls the
+ function amd64_return_value to figure out where the return value can
+ be found (on x86-64 targets anyway).
+
+ This function makes the wrong choice for the struct A in our case, as
+ sizeof(A) <= 8, then amd64_return_value decides that A will be
+ returned in a register. GDB then reads the return value register an
+ interprets the contents as an instance of A.
+
+ Unfortunately, A is not trivially copyable (due to its copy
+ constructor), and the sys-v specification for argument and return
+ value passing, says that any non-trivial C++ object should have space
+ allocated for it by the caller, and the address of this space is
+ passed to the callee as a hidden first argument. The callee should
+ then return the address of this space as the return value.
+
+ And so, the register that GDB is treating as containing an instance of
+ A, actually contains the address of an instance of A (in this case on
+ the stack), this is why GDB shows the incorrect result.
+
+ The call stack within GDB for where we actually go wrong is this:
+
+ amd64_return_value
+ amd64_classify
+ amd64_classify_aggregate
+
+ And it is in amd64_classify_aggregate that we should be classifying
+ the type as AMD64_MEMORY, instead of as AMD64_INTEGER as we currently
+ do (via a call to amd64_classify_aggregate_field).
+
+ At the top of amd64_classify_aggregate we already have this logic:
+
+ if (TYPE_LENGTH (type) > 16 || amd64_has_unaligned_fields (type))
+ {
+ theclass[0] = theclass[1] = AMD64_MEMORY;
+ return;
+ }
+
+ Which handles some easy cases where we know a struct will be placed
+ into memory, that is (a) the struct is more than 16-bytes in size,
+ or (b) the struct has any unaligned fields.
+
+ All we need then, is to add a check here to see if the struct is
+ trivially copyable. If it is not then we know the struct will be
+ passed in memory.
+
+ I originally structured the code like this:
+
+ if (TYPE_LENGTH (type) > 16
+ || amd64_has_unaligned_fields (type)
+ || !language_pass_by_reference (type).trivially_copyable)
+ {
+ theclass[0] = theclass[1] = AMD64_MEMORY;
+ return;
+ }
+
+ This solved the example from the bug, and my small example above. So
+ then I started adding some more extensive tests to the GDB testsuite,
+ and I ran into a problem. I hit this error:
+
+ gdbtypes.h:676: internal-error: loc_bitpos: Assertion `m_loc_kind == FIELD_LOC_KIND_BITPOS' failed.
+
+ This problem is triggered from:
+
+ amd64_classify_aggregate
+ amd64_has_unaligned_fields
+ field::loc_bitpos
+
+ Inside the unaligned field check we try to get the bit position of
+ each field. Unfortunately, in some cases the field location is not
+ FIELD_LOC_KIND_BITPOS, but is FIELD_LOC_KIND_DWARF_BLOCK.
+
+ An example that shows this bug is:
+
+ struct B
+ {
+ short j;
+ };
+
+ struct A : virtual public B
+ {
+ short i;
+
+ A ()
+ { this->i = 0; }
+ A (const A& a)
+ { this->i = a.i; }
+ };
+
+ A
+ func (int i)
+ {
+ A a;
+ a.i = i;
+ return a;
+ }
+
+ int
+ main ()
+ {
+ A a = func (3);
+ return a.i;
+ }
+
+ It is the virtual base class, B, that causes the problem. The base
+ class is represented, within GDB, as a field within A. However, the
+ location type for this field is a DWARF_BLOCK.
+
+ I spent a little time trying to figure out how to convert the
+ DWARF_BLOCK to a BITPOS, however, I realised that, in this case at
+ least, conversion is not needed.
+
+ The C++ standard says that a class is not trivially copyable if it has
+ any virtual base classes. And so, in this case, even if I could
+ figure out the BITPOS for the virtual base class fields, I know for
+ sure that I would immediately fail the trivially_copyable check. So,
+ lets just reorder the checks in amd64_classify_aggregate to:
+
+ if (TYPE_LENGTH (type) > 16
+ || !language_pass_by_reference (type).trivially_copyable
+ || amd64_has_unaligned_fields (type))
+ {
+ theclass[0] = theclass[1] = AMD64_MEMORY;
+ return;
+ }
+
+ Now, if we have a class with virtual bases we will fail quicker, and
+ avoid the unaligned fields check completely.
+
+ Bug: https://sourceware.org/bugzilla/show_bug.cgi?id=28681
+
+2021-12-23 Andrew Burgess <aburgess@redhat.com>
+
+ gdb: make use of SCOPE_EXIT to manage thread executing state
+ While working on another patch relating to how GDB manages threads
+ executing and resumed state, I spotted the following code in
+ record-btrace.c:
+
+ executing = tp->executing ();
+ set_executing (proc_target, inferior_ptid, false);
+
+ id = null_frame_id;
+ try
+ {
+ id = get_frame_id (get_current_frame ());
+ }
+ catch (const gdb_exception &except)
+ {
+ /* Restore the previous execution state. */
+ set_executing (proc_target, inferior_ptid, executing);
+
+ throw;
+ }
+
+ /* Restore the previous execution state. */
+ set_executing (proc_target, inferior_ptid, executing);
+
+ return id;
+
+ I notice that we only catch the exception so we can call
+ set_executing, and this is the same call to set_executing that we need
+ to perform in the non-exception return path.
+
+ This would be much cleaner if we could use SCOPE_EXIT to avoid the
+ try/catch, so lets do that.
+
+ While cleaning this up, I also applied a similar patch to
+ record-full.c, though there's no try/catch in that case, but using
+ SCOPE_EXIT makes the code safe if, in the future, we do start throwing
+ exceptions.
+
+ There should be no user visible changes after this commit.
+
+2021-12-23 GDB Administrator <gdbadmin@sourceware.org>
+
+ Automatic date update in version.in
+
+2021-12-22 Andrew Burgess <aburgess@redhat.com>
+
+ gdb/doc: add some index entries relating to mi-async setting
+ I noticed that the mi-async setting was not referenced from the index
+ in any way, this commit tries to rectify that a bit.
+
+ The @cindex lines I think are not controversial, these same index
+ entries are used elsewhere in the manual for async related topics (see
+ @node Background Execution).
+
+ The only bit that might be controversial is that I've added a @kindex
+ entry for 'set mi-async' when the command is documented as '-gdb-set
+ mi-async' (with a similar difference for the show/-gdb-show).
+
+ My reasoning here is that nothing else is indexed under -gdb-set or
+ -gdb-show, and as -gdb-set/-gdb-show are just the MI equivalent for
+ set/show anything that is documented under set/show can be adjusted
+ using -gdb-set/-gdbshow, and so, I've tried to keep the index
+ consistent for mi-async.
+
+2021-12-22 Andrew Burgess <aburgess@redhat.com>
+
+ gdb: convert 'set debug lin-lwp' to a boolean command
+ Convert the 'set debug lin-lwp' command to a boolean. Adds a new
+ LINUX_NAT_SCOPED_DEBUG_ENTER_EXIT macro, and makes use of it in one
+ place (linux_nat_target::stop).
+
+ The manual entry for 'set debug lin-lwp' is already vague about
+ exactly what arguments this command takes, and the description talks
+ about turning debug on and off, so I don't think there's any updates
+ required there.
+
+ I have updated the doc strings shown when the users enters 'help show
+ debug lin-lwp' or 'help show debug lin-lwp'. The old title lines used
+ to talk about the 'GNU/Linux lwp module', but this debug flag is now
+ used for any native linux target debug, so we now talk about
+ 'GNU/Linux native target'. The body string for this setting has been
+ changed from 'Enables printf debugging output.' to 'When on, print
+ debug messages relating to the GNU/Linux native target.', the old
+ value looks like a cut&paste error to me.
+
+2021-12-22 Andrew Burgess <aburgess@redhat.com>
+
+ gdb: add threads debugging switch
+ Add new commands:
+
+ set debug threads on|off
+ show debug threads
+
+ Prints additional debug information relating to thread creation and
+ deletion.
+
+ GDB already announces when threads are created of course.... most of
+ the time, but sometimes threads are added silently, in which case this
+ debug message is the only mechanism to see the thread being added.
+ Also, though GDB does announce when a thread exits, it doesn't
+ announce when the thread object is deleted, I've added a debug message
+ for that.
+
+ Additionally, having message printed through the debug system will
+ cause the messages to be nested to an appropriate depth when other
+ debug sub-systems are turned on (especially things like `infrun` and
+ `lin-lwp`).
+
+2021-12-22 jiawei <jiawei@iscas.ac.cn>
+
+ RISC-V: Update Scalar Crypto testcases.
+ Add opcodes in testcases to make sure every instruction generate
+ right opcode after disassemble.
+
+ gas/ChangeLog:
+
+ * testsuite/gas/riscv/k-ext-64.d: Add opcode detect.
+ * testsuite/gas/riscv/k-ext.d: Ditto.
+ * testsuite/gas/riscv/zbkb-32.d: Ditto.
+ * testsuite/gas/riscv/zbkb-64.d: Ditto.
+ * testsuite/gas/riscv/zbkc-32.d: Ditto.
+ * testsuite/gas/riscv/zbkc-64.d: Ditto.
+ * testsuite/gas/riscv/zbkx-32.d: Ditto.
+ * testsuite/gas/riscv/zbkx-64.d: Ditto.
+ * testsuite/gas/riscv/zknd-32.d: Ditto.
+ * testsuite/gas/riscv/zknd-64.d: Ditto.
+ * testsuite/gas/riscv/zkne-32.d: Ditto.
+ * testsuite/gas/riscv/zkne-64.d: Ditto.
+ * testsuite/gas/riscv/zknh-32.d: Ditto.
+ * testsuite/gas/riscv/zknh-64.d: Ditto.
+ * testsuite/gas/riscv/zksed-32.d: Ditto.
+ * testsuite/gas/riscv/zksed-64.d: Ditto.
+ * testsuite/gas/riscv/zksh-32.d: Ditto.
+ * testsuite/gas/riscv/zksh-64.d: Ditto.
+
+2021-12-22 Simon Marchi <simon.marchi@polymtl.ca>
+
+ gdbarch-components.py: change empty "params" tuples to empty lists
+ During review, it was suggested to change the "params" parameter from a
+ tuple to a list, for esthetic reasons. The empty ones are still tuples
+ though, they should probably be changed to be empty lists, for
+ consistency. It does not change anything in the script result.
+
+ Change-Id: If13c6c527aa167a5ee5b45740e5f1bda1e9517e4
+
+2021-12-22 GDB Administrator <gdbadmin@sourceware.org>
+
+ Automatic date update in version.in
+
+2021-12-21 Luis Machado <luis.machado@linaro.org>
+
+ [AArch64] Fix typo in error messages
+ Fix mispelling of PROT_ME to PROT_MTE in the error messages.
+
+2021-12-21 Joel Sherrill <joel@rtems.org>
+
+ Obsolete m32c-rtems and m32r-rtems
+ 2020-12-20 Joel Sherrill <joel@rtems.org>
+
+ bfd/
+ * config.bfd (m32c-*-rtems*): Remove target.
+
+ ld/
+ * configure.tgt (m32c-*-rtems*): Remove target.
+ * configure.tgt (m32r-*-rtems*): Remove target.
+
+2021-12-21 Jan Beulich <jbeulich@suse.com>
+
+ x86: -mfence-as-lock-add=yes doesn't work for 16-bit mode
+ Rather than trying to fix this (which would require making an assumption
+ on the upper half of %esp being zero), simply issue an error. While at
+ it, since the generated code is in conflict with -momit-lock-prefix=yes,
+ issue an error in that case as well.
+
+ gas/ELF: avoid below-base ref in obj_elf_parse_section_letters()
+ We would better be prepared for 'm' being the first character of the
+ incoming string.
+
+2021-12-21 Alan Modra <amodra@gmail.com>
+
+ Typo fixes in binutils doc
+ * doc/binutils.texi: Fix typos.
+
+2021-12-21 GDB Administrator <gdbadmin@sourceware.org>
+
+ Automatic date update in version.in
+
+2021-12-20 Tom Tromey <tom@tromey.com>
+
+ Remove print_spaces
+ This removes the print_spaces helper function, in favor of using the
+ "*%s" idiom that's already used in many places in gdb. One spot (in
+ symmisc.c) is changed to use print_spaces_filtered, because the rest
+ of that function is using filtered output. (This highlights one way
+ that the printf idiom is better -- this error is harder to make when
+ using that.)
+
+ Regression tested on x86-64 Fedora 34.
+
+2021-12-20 Tom Tromey <tom@tromey.com>
+
+ Remove puts_debug
+ I noticed that puts_debug isn't used in the tree. git log tells me
+ that the last use was removed in 2015:
+
+ commit 40e0b27177e747600d3ec186458fe0e482a1cf77
+ Author: Pedro Alves <palves@redhat.com>
+ Date: Mon Aug 24 15:40:26 2015 +0100
+
+ Delete the remaining ROM monitor targets
+
+ ... and this commit mentions that the code being removed here probably
+ hadn't worked for 6 years prior to that.
+
+ Based on this, I'm removing puts_debug. I don't think it's useful.
+ Tested by rebuilding.
+
+2021-12-20 Tom Tromey <tom@tromey.com>
+
+ Make n_spaces return a const char *
+ n_spaces keeps the spaces in a static buffer. If a caller overwrites
+ these, it may give an incorrect result to a subsequent caller. So,
+ make the return type const to help avoid this outcome.
+
+2021-12-20 Enze Li <lienze2010@hotmail.com>
+
+ Add Enze Li to gdb/MAINTAINERS
+
+2021-12-20 Joel Brobecker <brobecker@adacore.com>
+
+ gdb/ada-exp.y: Reformat comment to follow GDB's coding standards
+ This commit reformats a comment in gdb/ada-exp.y to avoid
+ the leading '*' at the beginning of each line of the comment.
+
+ gdb/ada-lang.h: Reformat comment to follow coding standards
+ This commit reformats a comment in gdb/ada-lang.h to avoid
+ the leading '*' at the beginning of each line of the comment.
+
+2021-12-20 GDB Administrator <gdbadmin@sourceware.org>
+
+ Automatic date update in version.in
+
+2021-12-19 Alan Modra <amodra@gmail.com>
+
+ Obsolete m32c-rtems
+
+ readelf: avoid a possible divide by zero
+ * readelf.c (process_section_headers): Check SHT_RELR entsize.
+
+2021-12-19 GDB Administrator <gdbadmin@sourceware.org>
+
+ Automatic date update in version.in
+
+2021-12-18 Enze Li <lienze2010@hotmail.com>
+
+ gdb: add "exit" command as an alias for "quit"
+ This command adds the "exit" command as an alias for the "quit"
+ command, as requested in PR gdb/28406.
+
+ The documentation is also updated to mention this new command.
+
+ Tested on x86_64-linux.
+
+ Bug: https://sourceware.org/bugzilla/show_bug.cgi?id=28406
+
+2021-12-18 Andrew Burgess <aburgess@redhat.com>
+
+ gdb: add assert in remote_target::wait relating to async being off
+ While working on another patch I ended up in a situation where I had
+ async mode disabled (with 'maint set target-async off'), but the async
+ event token got marked anyway.
+
+ In this situation GDB was continually calling into
+ remote_target::wait, however, the async token would never become
+ unmarked as the unmarking is guarded by target_is_async_p.
+
+ We could just unconditionally unmark the token, but that would feel
+ like just ignoring a bug, so, instead, lets assert that if
+ !target_is_async_p, then the async token should not be marked.
+
+ This assertion would have caught my earlier mistake.
+
+ There should be no user visible changes with this commit.
+
+2021-12-18 Andrew Burgess <aburgess@redhat.com>
+
+ gdb/remote: some fixes for 'maint set target-async off'
+ While working on another patch relating to remote targets, I wanted to
+ test with 'maint set target-async off' in place. Unfortunately I ran
+ into some problems. This commit is an attempt to fix one of the
+ issues I hit.
+
+ In my particular case I was actually running with:
+
+ maint set target-async off
+ maint set target-non-stop off
+
+ that is, we're telling GDB to force the targets to operate in
+ non-async mode, and in all-stop mode. Here's my GDB session showing
+ the problem:
+
+ (gdb) maintenance set target-async off
+ (gdb) maintenance set target-non-stop off
+ (gdb) target extended-remote :54321
+ Remote debugging using :54321
+ (gdb) attach 2365960
+ Attaching to process 2365960
+ No unwaited-for children left.
+ (gdb)
+
+ Notice the 'No unwaited-for children left.' error, this is the
+ problem. There's no reason why GDB should not be able to attach to
+ the process.
+
+ The problem is this:
+
+ 1. The user runs 'attach PID' and this sends GDB into attach_command
+ in infcmd.c. From here we call the ::attach method on the attach
+ target, which will be the extended_remote_target.
+
+ 2. In extended_remote_target::attach, we attach to the remote target
+ and get the first reply (which is a stop packet). We put off
+ processing the stop packet until the end of ::attach. We setup the
+ inferior and thread to represent the process we attached to, and
+ download the target description. Finally, we process the initial
+ stop packet.
+
+ If '!target_is_non_stop_p ()' and '!target_can_async_p ()', which is
+ the case for us given the maintenance commands we used, we cache the
+ stop packet within the remote_state::buf for later processing.
+
+ 3. Back in attach_command, if 'target_is_non_stop_p ()' then we
+ request that the target stops. This will either process any cached
+ stop replies, or request that the target stops, and process the stop
+ replies. However, this code is not what we use due to non-stop mode
+ being disabled. So, we skip to the next step which is to call
+ validate_exec_file.
+
+ 4. Calling validate_exec_file can cause packets to be sent to the
+ remote target, and replies received, the first path I hit is the
+ call to target_pid_to_exec_file, which calls
+ remote_target::pid_to_exec_file, which can then try to read the
+ executable from the remote. Sending an receiving packets will make
+ use of the remote_state::buf object.
+
+ 5. The attempt to attach continues, but the damage is already done...
+
+ So, the problem is that, in step #2 we cache a stop reply in the
+ remote_state::buf, and then in step #4 we reuse the remote_state::buf
+ object, discarding any cached stop reply. As a result, the initial
+ stop, which is sent when GDB first attaches to the target, is lost.
+
+ This problem can clearly be seen, I feel, by looking at the
+ remote_state::cached_wait_status flag. This flag tells GDB if there
+ is a wait status cached in remote_state::buf. However, in
+ remote_target::putpkt_binary and remote_target::getpkt_or_notif_sane_1
+ this flag is just set back to 0, doing this immediately discards any
+ cached data.
+
+ I don't know if this scheme ever made sense, looking at commit
+ 2d717e4f8a54, where the cached_wait_status flag was added, it appears
+ that there was nothing between where the stop was cached, and where
+ the stop was consumed, so, I suspect, there never was a situation
+ where we ended up in putpkt_binary or getpkt_or_notif_sane_1 and
+ needed to clear to the flag, maybe the clearing was added "just in
+ case". Whatever the history, I claim that this clearing this flag is
+ no longer a good idea.
+
+ So, my first step toward fixing this issue was to replace the two
+ instances of 'rs->cached_wait_status = 0;' in ::putpkt_binary and
+ ::getpkt_or_notif_sane_1 with 'gdb_assert (rs->cached_wait_status ==
+ 0);', this, at least would show me when GDB was doing something
+ dangerous, and indeed, this assert is now hit in my test case above.
+
+ I did play with using some kind of scoped restore to backup, and
+ restore the remote_state::buf object in all the places within remote.c
+ that I was hitting where the ::buf was being corrupted. The first
+ problem with this is that, where the ::cached_wait_status flag is
+ reset is _not_ where ::buf is corrupted. For the ::putpkt_binary
+ case, by the time we get to the method the buffer has already been
+ corrupted in many cases, so we end up needing to add the scoped
+ save/restore within the callers, which means we need the save/restore
+ in _lots_ of places.
+
+ Plus, using this save/restore model feels like the wrong solution. I
+ don't think that it's obvious that the buffer might be holding cached
+ data, and I think it would be too easy for new corruptions of the
+ buffer to be introduced, which could easily go unnoticed for a long
+ time.
+
+ So, I really wanted a solution that didn't require us to cache data in
+ the ::buf object.
+
+ Luckily, I think we already have such a solution in place, the
+ remote_state::stop_reply_queue, it seems like this does exactly the
+ same task, just in a slightly different way. With the
+ ::stop_reply_queue, the stop packets are processed upon receipt and
+ the stop_reply object is added to the queue. With the ::buf cache
+ solution, the unprocessed stop reply is cached in the ::buf, and
+ processed later.
+
+ So, finally, in this commit, I propose to remove the
+ remote_state::cached_wait_status flag and to stop using the ::buf to
+ cache stop replies. Instead, stop replies will now always be stored
+ in the ::stop_reply_queue.
+
+ There are two places where we use the ::buf to hold a cached stop
+ reply, the first is in the ::attach method, and the second is in
+ remote_target::start_remote, however, the second of these cases is far
+ less problematic, as after caching the stop reply in ::buf we call the
+ global start_remote function, which does very little work before
+ calling normal_stop, which processes the cached stop reply. However,
+ my plan is to switch both users over to using ::stop_reply_queue so
+ that the old (unsafe) ::cached_wait_status mechanism can be completely
+ removed.
+
+ The next problem is that the ::stop_reply_queue is currently only used
+ for async-mode, and so, in remote_target::push_stop_reply, where we
+ push stop_reply objects into the ::stop_reply_queue, we currently also
+ mark the async event token. I've modified this so we only mark the
+ async event token if 'target_is_async_p ()' - note, _is_, not _can_
+ here. The ::push_stop_reply method is called in places where async
+ mode has been temporarily disabled, but, when async mode is switched
+ back on (see remote_target::async) we will mark the event token if
+ there are events in the queue.
+
+ Another change of interest is in remote_target::remote_interrupt_as.
+ Previously this code checked ::cached_wait_status, but didn't check
+ for events in the ::stop_reply_queue. Now that ::cached_wait_status
+ has been removed we now check the queue length instead, which should
+ have the same result.
+
+ Finally, in remote_target::wait_as, I've tried to merge the processing
+ of the ::stop_reply_queue with how we used to handle the
+ ::cached_wait_status flag.
+
+ Currently, when processing the ::stop_reply_queue we call
+ process_stop_reply and immediately return. However, when handling
+ ::cached_wait_status we run through the whole of ::wait_as, and return
+ at the end of the function.
+
+ If we consider a standard stop packet, the two differences I see are:
+
+ 1. Resetting of the remote_state::waiting_for_stop_reply, flag; this
+ is not currently done when processing a stop from the
+ ::stop_reply_queue.
+
+ 2. The final return value has the possibility of being adjusted at
+ the end of ::wait_as, as well as there being calls to
+ record_currthread, non of which are done if we process a stop from
+ the ::stop_reply_queue.
+
+ After discussion on the mailing list:
+
+ https://sourceware.org/pipermail/gdb-patches/2021-December/184535.html
+
+ it was suggested that, when an event is pushed into the
+ ::stop_reply_queue, the ::waiting_for_stop_reply flag is never going
+ to be set. As a result, we don't need to worry about the first
+ difference. I have however, added a gdb_assert to validate the
+ assumption that the flag is never going to be set. If in future the
+ situation ever changes, then we should find out pretty quickly.
+
+ As for the second difference, I have resolved this by having all stop
+ packets taken from the ::stop_reply_queue, pass through the return
+ value adjustment code at the end of ::wait_as.
+
+ An example of a test that reveals the benefits of this commit is:
+
+ make check-gdb \
+ RUNTESTFLAGS="--target_board=native-extended-gdbserver \
+ GDBFLAGS='-ex maint\ set\ target-async\ off \
+ -ex maint\ set\ target-non-stop\ off' \
+ gdb.base/attach.exp"
+
+ For testing I've been running test on x86-64/GNU Linux, and run with
+ target boards unix, native-gdbserver, and native-extended-gdbserver.
+ For each board I've run with the default GDBFLAGS, as well as with:
+
+ GDBFLAGS='-ex maint\ set\ target-async\ off \
+ -ex maint\ set\ target-non-stop\ off' \
+
+ Though running with the above GDBFLAGS is clearly a lot more unstable
+ both before and after my patch, I'm not seeing any consistent new
+ failures with my patch, except, with the native-extended-gdbserver
+ board, where I am seeing new failures, but only because more tests are
+ now running. For that configuration alone I see the number of
+ unresolved go down by 49, the number of passes goes up by 446, and the
+ number of failures also increases by 144. All of the failures are new
+ tests as far as I can tell.
+
+2021-12-18 Vladimir Mezentsev <vladimir.mezentsev@oracle.com>
+
+ x86: Terminate mnemonicendp in swap_operand()
+ Tested on x86_64-pc-linux-gnu.
+
+ opcodes/ChangeLog:
+ 2021-12-17 Vladimir Mezentsev <vladimir.mezentsev@oracle.com>
+
+ * i386-dis.c (swap_operand): Terminate mnemonicendp.
+
+ gas/ChangeLog:
+ 2021-12-17 Vladimir Mezentsev <vladimir.mezentsev@oracle.com>
+
+ * testsuite/gas/i386/opts-intel.d: Updated expected disassembly.
+ * testsuite/gas/i386/opts.d: Likewise.
+ * testsuite/gas/i386/sse2avx-opts-intel.d: Likewise.
+ * testsuite/gas/i386/sse2avx-opts.d: Likewise.
+ * testsuite/gas/i386/x86-64-opts-intel.d: Likewise.
+ * testsuite/gas/i386/x86-64-opts.d: Likewise.
+ * testsuite/gas/i386/x86-64-sse2avx-opts-intel.d: Likewise.
+ * testsuite/gas/i386/x86-64-sse2avx-opts.d: Likewise.
+
+2021-12-18 GDB Administrator <gdbadmin@sourceware.org>
+
+ Automatic date update in version.in
+
+2021-12-17 Tom Tromey <tom@tromey.com>
+
+ Document gdbarch-components.py
+ This adds a comment to document how to update gdbarch.
+
+ Remove gdbarch.sh
+ This patch runs gdbarch.py and removes gdbarch.sh.
+
+2021-12-17 Simon Marchi <simon.marchi@efficios.com>
+
+ Add new gdbarch generator
+ The new gdbarch generator is a Python program. It reads the
+ "components.py" that was created in the previous patch, and generates
+ gdbarch.c and gdbarch-gen.h.
+
+ This is a relatively straightforward translation of the existing .sh
+ code. It doesn't try very hard to be idiomatic Python or to be
+ especially smart.
+
+ It is, however, incredibly faster:
+
+ $ time ./gdbarch.sh
+
+ real 0m8.197s
+ user 0m5.779s
+ sys 0m3.384s
+
+ $ time ./gdbarch.py
+
+ real 0m0.065s
+ user 0m0.053s
+ sys 0m0.011s
+
+ Co-Authored-By: Tom Tromey <tom@tromey.com>
+
+2021-12-17 Tom Tromey <tom@tromey.com>
+
+ Generate new gdbarch-components.py from gdbarch.sh
+ The new gdbarch.sh approach will be to edit a Python file, rather than
+ adding a line to a certain part of gdbarch.sh. We use the existing sh
+ code, though, to generate the first draft of this .py file.
+
+ Documentation on the format will come in a subsequent patch.
+
+ Note that some info (like "staticdefault") in the current code is
+ actually unused, and so is ignored by this new generator.
+
+2021-12-17 Tom Tromey <tom@tromey.com>
+
+ Do not sort the fields in gdbarch_dump
+ This changes gdbarch.sh so that it no longer sorts the fields in
+ gdbarch_dump. This sorting isn't done anywhere else by gdbarch.sh,
+ and this simplifies the new generator a little bit.
+
+ Do not generate gdbarch.h
+ Now that gdbarch.h has been split, we no longer need the generator
+ code in gdbarch.sh, so remove it.
+
+2021-12-17 Tom Tromey <tom@tromey.com>
+
+ Split gdbarch.h into two files
+ This patch splits gdbarch.h into two files -- gdbarch.h now is
+ editable and hand-maintained, and the new gdbarch-gen.h file is the
+ only thing generated by gdbarch.sh. This lets us avoid maintaining
+ boilerplate in the gdbarch.sh file.
+
+ Note that gdbarch.sh still generates gdbarch.h after this patch. This
+ makes it easier to re-run when rebasing. This code is removed in a
+ subsequent patch.
+
+2021-12-17 Tom Tromey <tom@tromey.com>
+
+ Move ordinary gdbarch code to arch-utils
+ While I think it makes sense to generate gdbarch.c, at the same time I
+ think it is better for ordinary code to be editable in a C file -- not
+ as a hunk of C code embedded in the generator.
+
+ This patch moves this sort of code out of gdbarch.sh and gdbarch.c and
+ into arch-utils.c, then has arch-utils.c include gdbarch.c.
+
+2021-12-17 Maciej W. Rozycki <macro@embecosm.com>
+
+ Avoid redundant operations in `fortran_array_walker'
+ Move inner dimension's element type determination outside the respective
+ loops in `fortran_array_walker'. The operation is exactly the same with
+ each iteration, so there is no point in redoing it for each element and
+ while a smart compiler might be able to move it outside the loop it is
+ regardless a bad coding style. No functional change.
+
+ Initialize `m_ndimensions' in the member initializer list
+ Following our coding convention initialize the `m_ndimensions' member in
+ the member initializer list rather than in the body of the constructor
+ of the `fortran_array_walker' class. No functional change.
+
+2021-12-17 Lancelot SIX <lancelot.six@amd.com>
+ Pedro Alves <pedro@palves.net>
+
+ gdb/tui: install SIGWINCH only when connected to a TTY
+ PR26056 reports that when GDB is connected to non-TTY stdin/stdout, it
+ crashes when it receives a SIGWINCH signal.
+
+ This can be reproduced as follows:
+
+ $ gdb/gdb -nx -batch -ex 'run' --args sleep 60 </dev/null 2>&1 | cat
+
+ # from another terminal:
+ $ kill -WINCH %(pidof gdb)
+
+ When doing so, the process crashes in a call to rl_resize_terminal:
+
+ void
+ rl_resize_terminal (void)
+ {
+ _rl_get_screen_size (fileno (rl_instream), 1);
+ ...
+ }
+
+ The problem is that at this point rl_instream has the value NULL.
+
+ The rl_instream variable is supposed to be initialized during a call to
+ readline_initialize_everything, which in a normal startup sequence is
+ called under this call chain:
+
+ tui_interp::init
+ tui_ensure_readline_initialized
+ rl_initialize
+ readline_initialize_everything
+
+ In tui_interp::init, we have the following sequence:
+
+ tui_initialize_io ();
+ tui_initialize_win (); // <- Installs SIGWINCH
+ if (gdb_stdout->isatty ())
+ tui_ensure_readline_initialized (); // <- Initializes rl_instream
+
+ This function unconditionally installs the SIGWINCH signal handler (this
+ is done by tui_initialize_win), and then if gdb_stdout is a TTY it
+ initializes readline. Therefore, if stdout is not a TTY, SIGWINCH is
+ installed but readline is not initialized. In such situation
+ rl_instream stays NULL, and when GDB receives a SIGWINCH it calls its
+ handler and in fine tries to access rl_instream leading to the crash.
+
+ This patch proposes to fix this issue by installing the SIGWINCH signal
+ handler only if GDB is connected to a TTY. Given that this
+ initialization it the only task of tui_initialize_win, this patch moves
+ tui_initialize_win just after the call to
+ tui_ensure_readline_initialized.
+
+ Tested on x86_64-linux.
+
+ Bug: https://sourceware.org/bugzilla/show_bug.cgi?id=26056
+ Change-Id: I6458acef7b0d9beda2a10715d0345f02361076d9
+
+2021-12-17 Alan Modra <amodra@gmail.com>
+
+ asan: NULL dereference in bfd_elf_set_group_contents
+ * elf-bfd.h (struct output_elf_obj_tdata): Make num_section_syms
+ unsigned.
+ * elf.c (bfd_elf_set_group_contents): Bounds check sec->index
+ and check that entry in elf_section_syms for sec is non-NULL.
+ (_bfd_elf_symbol_from_bfd_symbol): Adjust.
+
+2021-12-17 Alan Modra <amodra@gmail.com>
+
+ asan: use after free in _bfd_elf_mips_get_relocated_section_contents
+ Leaving entries on mips_hi16_list from a previous pass over relocs
+ leads to confusing bugs.
+
+ * elfxx-mips.c (_bfd_elf_mips_get_relocated_section_contents):
+ Free mips_hi16_list entries on error exit.
+
+2021-12-17 Alan Modra <amodra@gmail.com>
+
+ asan: abort in wasm_scan_name_function_section
+ Macros like READ_LEB128 in wasm-module.c that alter control flow are
+ evil. Maintainers will break your code if you have hidden ways to
+ reach labels.
+
+ * wasm-module.c (wasm_scan_name_function_section): Don't
+ attempt to bfd_release NULL.
+
+2021-12-17 Alan Modra <amodra@gmail.com>
+
+ asan: heap-buffer-overflow in bpf_elf_generic_reloc
+ The bpf reloc howtos are a bit weird, using bitpos to specify an
+ offset from r_offset that is outside the size of the reloc as given by
+ howto.size. That means bfd_get_reloc_size gives the wrong answer for
+ range checking, and thus bfd_reloc_offset_in_range can't be used.
+
+ * elf64-bpf.c (bpf_elf_generic_reloc): Handle bitpos offset reloc
+ range checking.
+
+2021-12-17 Alan Modra <amodra@gmail.com>
+
+ ubsan: bfd.c:2519:8: shift exponent 34 is too large
+ * bfd.c (bfd_update_compression_header): Avoid integer overflow.
+
+ asan: buffer overflow in mmo_get_symbols
+ * mmo.c (mmo_get_symbols): Error on symbol name exceeding max length.
+
+2021-12-17 Alan Modra <amodra@gmail.com>
+
+ asan: buffer overflow in elfnn-aarch64.c get_plt_type
+ We can't assume .dynamic is a multiple of ElfNN_External_Dyn, at least
+ not when presented with fuzzed object files.
+
+ * elfnn-aarch64.c (get_plt_type): Don't access past end of
+ improperly sized .dynamic.
+
+2021-12-17 Alan Modra <amodra@gmail.com>
+
+ try_build_id_prefix gcc-10 -Wformat-security errors
+ dwarf.c:11300:3: error: format not a string literal and no format arguments [-Werror=format-security]
+ 11300 | f += sprintf (f, prefix);
+
+ PR 28697
+ * dwarf.c (try_build_id_prefix): Avoid -Wformat-security error.
+
+2021-12-17 GDB Administrator <gdbadmin@sourceware.org>
+
+ Automatic date update in version.in
+
+2021-12-16 Nick Clifton <nickc@redhat.com>
+
+ Fix AVR assembler so that it creates relocs that will work with linker relaxation.
+ PR 28686
+ gas * config/tc-avr.h (tc_fix_adjustable): Define.
+ * config/tc-avr.c (avr_fix_adjustable): New function.
+ * testsuite/gas/all/gas.exp: Skip tests that need adjustable fixups.
+ * testsuite/gas/elf/elf.exp: Likewise.
+ * testsuite/gas/avr/diffreloc_withrelax.d: Adjust expected output.
+ * testsuite/gas/avr/pc-relative-reloc.d: Adjust expected output.
+
+ ld * testsuite/ld-avr/avr-prop-7.d: Adjust expected output.
+ * testsuite/ld-avr/avr-prop-8.d: Likewise.
+ * testsuite/ld-avr/pr13402.d: Likewise.
+
+2021-12-16 Nick Clifton <nickc@redhat.com>
+
+ When loading separate debug info files, also attempt to locate a file based upon the build-id.
+ PR 28697
+ * dwarf.c (load_build_id_debug_file): New function.
+ (try_build_id_prefix): New function.
+ (check_for_and_load_links): Call load_build_id_debug_file.
+ (debug_displays): Add entry for .note.gnu.build-id.
+ * dwarf.h (enum dwarf_section_display_enum): Add
+ note_gnu_build_id.
+ * testsuite/binutils-all/debuginfod.exp (test_fetch_debuglink):
+ Fix regexp for loads via debuglink section.
+
+2021-12-16 Richard Sandiford <richard.sandiford@arm.com>
+
+ arm: Add support for Armv9.1-A to Armv9.3-A
+ This patch adds AArch32 support for -march=armv9.[123]-a.
+ The behaviour of the new options can be expressed using a
+ combination of existing feature flags and tables.
+
+ The cpu_arch_ver entries for ARM_ARCH_V9_2A and ARM_ARCH_V9_3A
+ are technically redundant but it seemed less surprising to include
+ them anyway.
+
+ include/
+ * opcode/arm.h (ARM_ARCH_V9_1A, ARM_ARCH_V9_2A): New macros.
+ (ARM_ARCH_V9_3A): Likewise.
+
+ gas/
+ * doc/c-arm.texi: Add armv9.1-a, armv9.2-a and armv9.3-a.
+ * config/tc-arm.c (armv91a_ext_table, armv92a_ext_table): New macros.
+ (armv93a_ext_table): Likewise.
+ (arm_archs): Add armv9.1-a, armv9.2-a and armv9.3-a.
+ (cpu_arch_ver): Add ARM_ARCH_V9_1A, ARM_ARCH_V9_2A and ARM_ARCH_V9_3A.
+ * NEWS: Mention the above.
+ * testsuite/gas/arm/attr-march-armv9_1-a.d: New test.
+ * testsuite/gas/arm/attr-march-armv9_2-a.d: Likewise.
+ * testsuite/gas/arm/attr-march-armv9_3-a.d: Likewise.
+ * testsuite/gas/arm/bfloat16-armv9.1-a.d: Likewise.
+ * testsuite/gas/arm/bfloat16-armv9.2-a.d: Likewise.
+ * testsuite/gas/arm/bfloat16-armv9.3-a.d: Likewise.
+ * testsuite/gas/arm/i8mm-armv9.1-a.d: Likewise.
+ * testsuite/gas/arm/i8mm-armv9.2-a.d: Likewise.
+ * testsuite/gas/arm/i8mm-armv9.3-a.d: Likewise.
+
+2021-12-16 Richard Sandiford <richard.sandiford@arm.com>
+
+ arm: Add support for Armv8.7-A and Armv8.8-A
+ This patch adds AArch32 support for -march=armv8.[78]-a.
+ The behaviour of the new options can be expressed using a
+ combination of existing feature flags and tables.
+
+ The cpu_arch_ver entries are technically redundant but
+ it seemed less surprising to include them anyway.
+
+ include/
+ * opcode/arm.h (ARM_ARCH_V8_7A, ARM_ARCH_V8_8A): New macros.
+
+ gas/
+ * doc/c-arm.texi: Add armv8.7-a and armv8.8-a.
+ * config/tc-arm.c (armv87a_ext_table, armv88a_ext_table): New macros.
+ (arm_archs): Add armv8.7-a and armv8.8-a.
+ (cpu_arch_ver): Add ARM_ARCH_V8_7A and ARM_ARCH_V8_8A.
+ * NEWS: Mention the above.
+ * testsuite/gas/arm/attr-march-armv8_7-a.d: New test.
+ * testsuite/gas/arm/attr-march-armv8_8-a.d: Likewise.
+ * testsuite/gas/arm/bfloat16-armv8.7-a.d: Likewise.
+ * testsuite/gas/arm/bfloat16-armv8.8-a.d: Likewise.
+ * testsuite/gas/arm/i8mm-armv8.7-a.d: Likewise.
+ * testsuite/gas/arm/i8mm-armv8.8-a.d: Likewise.
+
+2021-12-16 Richard Sandiford <richard.sandiford@arm.com>
+
+ aarch64: Add support for Armv9.1-A to Armv9.3-A
+ This patch adds AArch64 support for -march=armv9.[123]-a.
+ The behaviour of the new options can be expressed using a
+ combination of existing feature flags, so we don't need to
+ eat into the vanishing number of spare AARCH64_FEATURE_* bits.
+ Hoewver, it was more convenient to separate out the |s of
+ feature flags so that Armv9.1-A could reuse the set for
+ Armv8.6-A, and so on.
+
+ include/
+ * opcode/aarch64.h (AARCH64_ARCH_V8_FEATURES): New macro,
+ split out from...
+ (AARCH64_ARCH_V8): ...here.
+ (AARCH64_ARCH_V8_1_FEATURES): New macro, split out from...
+ (AARCH64_ARCH_V8_1): ...here.
+ (AARCH64_ARCH_V8_2_FEATURES): New macro, split out from...
+ (AARCH64_ARCH_V8_2): ...here.
+ (AARCH64_ARCH_V8_3_FEATURES): New macro, split out from...
+ (AARCH64_ARCH_V8_3): ...here.
+ (AARCH64_ARCH_V8_4_FEATURES): New macro, split out from...
+ (AARCH64_ARCH_V8_4): ...here.
+ (AARCH64_ARCH_V8_5_FEATURES): New macro, split out from...
+ (AARCH64_ARCH_V8_5): ...here.
+ (AARCH64_ARCH_V8_6_FEATURES): New macro, split out from...
+ (AARCH64_ARCH_V8_6): ...here.
+ (AARCH64_ARCH_V8_7_FEATURES): New macro, split out from...
+ (AARCH64_ARCH_V8_7): ...here.
+ (AARCH64_ARCH_V8_8_FEATURES): New macro, split out from...
+ (AARCH64_ARCH_V8_8): ...here.
+ (AARCH64_ARCH_V9_FEATURES): New macro, split out from...
+ (AARCH64_ARCH_V9): ...here.
+ (AARCH64_ARCH_V9_1_FEATURES, AARCH64_ARCH_V9_1): New macros.
+ (AARCH64_ARCH_V9_2_FEATURES, AARCH64_ARCH_V9_2): New macros.
+ (AARCH64_ARCH_V9_3_FEATURES, AARCH64_ARCH_V9_3): New macros.
+
+ gas/
+ * doc/c-aarch64.texi: Add armv9.1-a, armv9-2-a and armv9.3-a.
+ * config/tc-aarch64.c (aarch64_archs): Likewise.
+ * NEWS: Mention the above.
+ * testsuite/gas/aarch64/armv9_invalid.d,
+ testsuite/gas/aarch64/armv9_invalid.s,
+ testsuite/gas/aarch64/armv9_invalid.l: New test.
+ * testsuite/gas/aarch64/armv9_1.d,
+ testsuite/gas/aarch64/armv9_1.s: Likewise.
+ * testsuite/gas/aarch64/armv9_1_invalid.d,
+ testsuite/gas/aarch64/armv9_1_invalid.s,
+ testsuite/gas/aarch64/armv9_1_invalid.l: Likewise.
+ * testsuite/gas/aarch64/armv9_2.d,
+ testsuite/gas/aarch64/armv9_2.s: Likewise.
+ * testsuite/gas/aarch64/armv9_2_invalid.d,
+ testsuite/gas/aarch64/armv9_2_invalid.s,
+ testsuite/gas/aarch64/armv9_2_invalid.l: Likewise.
+ * testsuite/gas/aarch64/armv9_3.d,
+ testsuite/gas/aarch64/armv9_3.s: Likewise.
+
+2021-12-16 Nelson Chu <nelson.chu@sifive.com>
+
+ RISC-V: Support svinval extension with frozen version 1.0.
+ According to the privileged spec, there are five new instructions for
+ svinval extension. Two of them (HINVAL.VVMA and HINVAL.GVMA) need to
+ enable the hypervisor extension. But there is no implementation of
+ hypervisor extension in mainline for now, so let's consider the related
+ issues later.
+
+ 31..25 24..20 19..15 14..12 11...7 6..2 1..0
+ sinval.vma 0001011 rs2 rs1 000 00000 11100 11
+ sfence.w.inval 0001100 00000 00000 000 00000 11100 11
+ sfence.inval.ir 0001100 00001 00000 000 00000 11100 11
+ hinval.vvma 0010011 rs2 rs1 000 00000 11100 11
+ hinval.gvma 0110011 rs2 rs1 000 00000 11100 11
+
+ This patch is cherry-picked from the riscv integration branch since the
+ svinval extension is frozen for now. Besides, we fix the funct7 encodings
+ of hinval.vvma and hinval.gvma, from 0x0011011 and 0x0111011 to 0x0010011
+ and 0x0110011.
+
+ bfd/
+ * elfxx-riscv.c (riscv_supported_std_s_ext): Added svinval.
+ (riscv_multi_subset_supports): Handle INSN_CLASS_SVINVAL.
+ gas/
+ * testsuite/gas/riscv/svinval.d: New testcase.
+ * testsuite/gas/riscv/svinval.s: Likewise.
+ include/
+ * opcode/riscv-opc.h: Added encodings for svinval.
+ * opcode/riscv.h (enum riscv_insn_class): Added INSN_CLASS_SVINVAL.
+ opcodes/
+ * riscv-opc.c (riscv_opcodes): Added svinval instructions.
+
+2021-12-16 Mike Frysinger <vapier@gentoo.org>
+
+ sim: mips/or1k: drop redundant arg to bitsize macro
+ These are just using the default behavior for the 3rd arg, so drop
+ it to make it more clear. This also makes them match all other
+ ports that only use the first 2 arguments.
+
+2021-12-16 Mike Frysinger <vapier@gentoo.org>
+
+ bfd: unify texi generation rules
+ The logic between these rules are extremely similar, so unify them
+ into a single variable by leveraging make $@ and $< variables.
+
+ Also add automake silent rule support while we're here.
+
+2021-12-16 Mike Frysinger <vapier@gentoo.org>
+
+ sim: fix mingw builds with replacement gnulib open
+ The header shuffling in here broke the workaround for gnulib defining
+ "open". Move it back before the sim-specific includes to fix. This
+ is because the callback struct in the headers has an "open" member and
+ this file tries to call that.
+
+2021-12-16 Sandra Loosemore <sandra@codesourcery.com>
+
+ Adjust compare_link_order for unstable qsort
+ In a cross toolchain for nios2-elf target and x86_64-w64-mingw32 host
+ using binutils 2.37, we observed a failure that didn't show up on
+ x86_64-linux-gnu host: testcase pr25490-5.s was failing with
+
+ C:\path\to\nios2-elf-ld.exe: looping in map_segments
+ FAIL: __patchable_function_entries section 5
+
+ * ldelfgen.c (compare_link_order): Don't use section id in
+ sorting. Keep original ordering instead. Update comments.
+
+2021-12-16 Alan Modra <amodra@gmail.com>
+
+ Re: Fix an undefined behaviour in the BFD library's DWARF parser
+ Using an unsigned int cast (to 32 bits) on a pointer difference (of
+ possibly 64 bits) is wrong. Even though it will work on all real
+ object files, the fuzzers will eventually find this hole.
+
+ PR 28687
+ * dwarf1.c (parse_die): Cast pointer difference to size_t.
+ Catch another possible pointer overflow.
+
+2021-12-16 Simon Marchi <simon.marchi@polymtl.ca>
+
+ gdb: re-format with black 21.12b0
+ Run black 21.12b0 on gdb/, there is a single whitespace change. I will
+ update the wiki [1] in parallel to bump the version of black to 21.12b0.
+
+ [1] https://sourceware.org/gdb/wiki/Internals%20GDB-Python-Coding-Standards
+
+ Change-Id: Ib3b859e3506c74a4f15d16f1e44ef402de3b98e2
+
+2021-12-16 Simon Marchi <simon.marchi@polymtl.ca>
+
+ gdb: re-format with black 21.9b0
+ Run black 21.9b0 on gdb/ (this is the version currently mentioned on the
+ wiki [1], the subsequent commit will bump that version).
+
+ [1] https://sourceware.org/gdb/wiki/Internals%20GDB-Python-Coding-Standards
+
+ Change-Id: I5ceaab42c42428e053e2572df172aa42a88f0f86
+
+2021-12-16 GDB Administrator <gdbadmin@sourceware.org>
+
+ Automatic date update in version.in
+
+2021-12-15 Alan Modra <amodra@gmail.com>
+
+ PR28691, validate dwarf attribute form
+ PR28691 is a fuzzing PR that triggers a non-problem of "output changes
+ per run" with PIEs and/or different compilers. I've closed similar
+ PRs before as wontfix, but I guess there will be no end of this type
+ of PR. The trigger is an attribute that usually takes one of the
+ offset/constant reference DW_FORMs being given an indexed string
+ DW_FORM. The bfd reader doesn't support indexed strings and returns
+ an error string instead. The address of the string varies with PIE
+ runs and/or compiler, and we allow that address to appear in output.
+ Fix this by validating integer attribute forms, as we do for string
+ form attributes.
+
+ PR 28691
+ * dwarf2.c (is_str_attr): Rename to..
+ (is_str_form): ..this. Change param type. Update calls.
+ (is_int_form): New function.
+ (read_attribute_value): Handle DW_FORM_addrx2.
+ (find_abstract_instance): Validate form when using attr.u.val.
+ (scan_unit_for_symbols, parse_comp_unit): Likewise.
+
+2021-12-15 Luis Machado <luis.machado@linaro.org>
+
+ New --enable-threading configure option to control use of threads in GDB/GDBserver
+ Add the --enable-threading configure option so multithreading can be disabled
+ at configure time. This is useful for statically-linked builds of
+ GDB/GDBserver, since the thread library doesn't play well with that setup.
+
+ If you try to run a statically-linked GDB built with threading, it will crash
+ when setting up the number of worker threads.
+
+ This new option is also convenient when debugging GDB in a system with lots of
+ threads, where the thread discovery code in GDB will emit too many messages,
+ like so:
+
+ [New Thread 0xfffff74d3a50 (LWP 2625599)]
+
+ If you have X threads, that message will be repeated X times.
+
+ The default for --enable-threading is "yes".
+
+2021-12-15 Nikita Popov <npv1310@gmail.com>
+
+ Fix an undefined behaviour in the BFD library's DWARF parser.
+ PR 28687
+ * dwarf1.c (parse_die): Fix undefined behaviour in range tests.
+
+2021-12-15 Alan Modra <amodra@gmail.com>
+
+ PR28694, Out-of-bounds write in stab_xcoff_builtin_type
+ PR 28694
+ * stabs.c (stab_xcoff_builtin_type): Make typenum unsigned.
+ Negate typenum earlier, simplifying bounds checking. Correct
+ off-by-one indexing. Adjust switch cases.
+
+2021-12-15 GDB Administrator <gdbadmin@sourceware.org>
+
+ Automatic date update in version.in
+
+2021-12-14 Alan Modra <amodra@gmail.com>
+
+ loongarch32 build failure on 32-bit host
+ gas/config/tc-loongarch.c: In function ‘assember_macro_helper’:
+ gas/config/tc-loongarch.c:915:28: error: right shift count >= width of type [-Werror=shift-count-overflow]
+ 915 | hi32 = insn->args[1] >> 32;
+ | ^~
+
+ One possible fix is to make offsetT a 64-bit type for loongarch32.
+ This also makes bfd/targmatch.h (generated from bfd/config.bfd)
+ consistent since the loongarch32 match is inside #ifdef BFD64.
+
+ * config.bfd (loongarch32-*): Set want64.
+
+2021-12-14 Alan Modra <amodra@gmail.com>
+
+ loongarch64 build failure on 32-bit host
+ gas/config/tc-loongarch.c: In function ‘loongarch_args_parser_can_match_arg_helper’:
+ gas/config/tc-loongarch.c:661:13: error: cast from pointer to integer of different size [-Werror=pointer
+ -to-int-cast]
+ 661 | imm = (offsetT) str_hash_find (r_htab, arg);
+ | ^
+
+ Cast it to the correct size int, relying on normal integer promotions
+ if offsetT is larger than a pointer.
+
+ * config/tc-loongarch.c (loongarch_args_parser_can_match_arg_helper):
+ Cast return from str_hash_find to intptr_t, not offsetT.
+
+2021-12-14 Alan Modra <amodra@gmail.com>
+
+ XCOFF C_STSYM test failure on 32-bit host
+ This test was failing here and on another similar symbol:
+ [ 4](sec 1)(fl 0x00)(ty 0)(scl 143) (nx 0) 0x05d1745d11745d21 .bs
+ where correct output is
+ [ 4](sec 1)(fl 0x00)(ty 0)(scl 143) (nx 0) 0x000000000000000a .bs
+
+ The problem is caused by a 32-bit host pointer being sign-extended
+ when stored into a 64-bit bfd_vma, and then that value not being
+ trimmed back to 32 bits when used. The following belt-and-braces
+ patch fixes both the store and subsequent reads.
+
+ * coffcode.h (coff_slurp_symbol_table): Do not sign extend
+ when storing a host pointer to syment.n_value.
+ * coffgen.c (coff_get_symbol_info): Cast syment.n_value to a
+ bfd_hostptr_t before using in arithmetic.
+ (coff_print_symbol): Likewise.
+
+2021-12-14 Simon Marchi <simon.marchi@efficios.com>
+
+ gdbserver/tracepoint.cc: use snprintf in gdb_agent_socket_init
+ If we modify tracepoint.cc to try to use a too long unix socket name,
+ for example by modifying SOCK_DIR to be:
+
+ #define SOCK_DIR "/tmp/salut/salut/salut/salut/salut/salut/salut/salut/salut/salut/salut/salut/salut/salut/salut/salut/salut/salut/salut/salut/salut/salut/salut/salut/salut/salut/salut/salut/salut/salut/salut/salut/salut/salut/salut/salut/salut/salut/salut/salut/salut/salut/salut/salut/salut/salut/salut/salut/salut/salut/salut/salut/salut"
+
+ ... trying to start an application with libinproctrace.so loaded
+ crashes:
+
+ $ LD_PRELOAD=/usr/lib/x86_64-linux-gnu/libasan.so.6:./libinproctrace.so /bin/ls
+ /home/smarchi/src/binutils-gdb/gdbserver/../gdbsupport/common-utils.cc:69: A problem internal to GDBserver in-process agent has been detected.
+ xsnprintf: Assertion `ret < size' failed.
+
+ Looking at the rest of the socket initialization code, the intent seems
+ to be that if something goes wrong, we warn but let the program
+ execute. So crashing on this failed assertions seems against the intent.
+
+ Commit 6cebaf6e1ae4 ("use xsnprintf instead of snprintf.") changed this
+ code to use xsnprintf instead of snprintf, introducing this assertion.
+ Before that, snprintf would return a value bigger that UNIX_PATH_MAX and
+ the "if" after would catch it and emit a warning, which is exactly what
+ we want. That change was done because LynxOS didn't have snprintf.
+ Since LynxOS isn't supported anymore, we can simply revert to use
+ snprintf there.
+
+ With this patch, we get a warning (printed by the caller of
+ gdb_agent_socket_init), but the program keeps executing:
+
+ $ LD_PRELOAD=/usr/lib/x86_64-linux-gnu/libasan.so.6:./libinproctrace.so /bin/ls
+ ipa: could not create sync socket
+ ...
+
+ Change-Id: I78bca52d5dc3145335abeae45a42052701e3f5dd
+
+2021-12-14 Simon Marchi <simon.marchi@efficios.com>
+
+ gdbserver/tracepoint.cc: work around -Wstringop-truncation error
+ When building gdb with on AArch64 with g++ 11.1.0 (and some preceding
+ versions too), -O2 and -fsanitize=address, I get this error.
+
+ CXX tracepoint-ipa.o
+ cc1plus: warning: command-line option ‘-Wmissing-prototypes’ is valid for C/ObjC but not for C++
+ In file included from /usr/include/string.h:519,
+ from ../gnulib/import/string.h:41,
+ from /home/simark/src/binutils-gdb/gdbserver/../gdbsupport/common-defs.h:95,
+ from /home/simark/src/binutils-gdb/gdbserver/server.h:22,
+ from /home/simark/src/binutils-gdb/gdbserver/tracepoint.cc:19:
+ In function ‘char* strncpy(char*, const char*, size_t)’,
+ inlined from ‘int init_named_socket(const char*)’ at /home/simark/src/binutils-gdb/gdbserver/tracepoint.cc:6902:11,
+ inlined from ‘int gdb_agent_socket_init()’ at /home/simark/src/binutils-gdb/gdbserver/tracepoint.cc:6953:26,
+ inlined from ‘void* gdb_agent_helper_thread(void*)’ at /home/simark/src/binutils-gdb/gdbserver/tracepoint.cc:7204:41:
+ /usr/include/bits/string_fortified.h:95:34: error: ‘char* __builtin_strncpy(char*, const char*, long unsigned int)’ output may be truncated copying 107 bytes from a string of length 107 [-Werror=stringop-truncation]
+ 95 | return __builtin___strncpy_chk (__dest, __src, __len,
+ | ~~~~~~~~~~~~~~~~~~~~~~~~^~~~~~~~~~~~~~~~~~~~~~
+ 96 | __glibc_objsize (__dest));
+ | ~~~~~~~~~~~~~~~~~~~~~~~~~
+
+ Note that _FORTIFY_SOURCE changes the message a bit, but I get a similar
+ error if I use -D_FORTIFY_SOURCE=0.
+
+ I am pretty sure it's spurious and might be related to this GCC bug:
+
+ https://gcc.gnu.org/bugzilla/show_bug.cgi?id=88780
+
+ From what I can see, we are copying from a static 108 bytes long buffer
+ (the global array agent_socket_name) to a 108 bytes long array,
+ sockaddr_un::sun_path. I don't see anything wrong.
+
+ Still, it would make things easier if we didn't see this error. Change
+ the code to check that the source string length is smaller than the
+ destination buffer (including space for the NULL byte) and use strcpy.
+
+ For anybody who would like to try to reproduce, the full command line
+ is:
+
+ g++ -I. -I/home/simark/src/binutils-gdb/gdbserver -I/home/simark/src/binutils-gdb/gdbserver/../gdb/regformats -I/home/simark/src/binutils-gdb/gdbserver/.. -I/home/simark/src/binutils-gdb/gdbserver/../include -I/home/simark/src/binutils-gdb/gdbserver/../gdb -I/home/simark/src/binutils-gdb/gdbserver/../gnulib/import -I../gnulib/import -I/home/simark/src/binutils-gdb/gdbserver/.. -I.. -pthread -Wall -Wpointer-arith -Wno-unused -Wunused-value -Wunused-variable -Wunused-function -Wno-switch -Wno-char-subscripts -Wempty-body -Wunused-but-set-parameter -Wunused-but-set-variable -Wno-sign-compare -Wno-error=maybe-uninitialized -Wno-mismatched-tags -Wsuggest-override -Wimplicit-fallthrough=3 -Wduplicated-cond -Wshadow=local -Wdeprecated-copy -Wdeprecated-copy-dtor -Wredundant-move -Wmissing-declarations -Wmissing-prototypes -Wstrict-null-sentinel -Wformat -Wformat-nonliteral -Werror -DGDBSERVER -DCONFIG_UST_GDB_INTEGRATION -Drpl_strerror_r=strerror_r -Drpl_free=free -fPIC -DIN_PROCESS_AGENT -fvisibility=hidden -g3 -O2 -fsanitize=address -c -o tracepoint-ipa.o -MT tracepoint-ipa.o -MMD -MP -MF ./.deps/tracepoint-ipa.Tpo /home/simark/src/binutils-gdb/gdbserver/tracepoint.cc
+
+ Change-Id: I18e86c0487feead7e7677e69398405e7057cf464
+
+2021-12-14 Simon Marchi <simon.marchi@polymtl.ca>
+
+ bfd: fix -Wunused errors with clang 13+
+ Clang 13 and 14 produce some -Wunused-but-set-{variable,parameter} for
+ situations where gcc doesn't. In particular, when a variable is set and
+ then used in a way to update its own value. For example, if `i` is only
+ used in this way:
+
+ int i = 2;
+ i++;
+ i = i + 1;
+
+ gcc won't warn, but clang will.
+
+ Fix all such errors found in an --enable-targets=all build. It would be
+ important for somebody who knows what they're doing to just make sure
+ that these variables can indeed be deleted, and that there a no cases
+ where it's a bug, and the variable should actually be used.
+
+ The first instance of this error fix by this patch is:
+
+ CC elf32-score.lo
+ /home/simark/src/binutils-gdb/bfd/elf32-score.c:450:11: error: variable 'relocation' set but not used [-Werror,-Wunused-but-set-variable]
+ bfd_vma relocation;
+ ^
+
+ Change-Id: I2f233ce20352645cf388aff3dfa08a651d21a6b6
+
+2021-12-14 Andrew Burgess <aburgess@redhat.com>
+
+ gdb/mi: rename build_table to add_builtin_mi_commands
+ Just give the function build_table a more descriptive name. There
+ should be no user visible changes after this commit.
+
+2021-12-14 Jan Vrany <jan.vrany@labware.com>
+
+ gdb/mi: rename mi_cmd to mi_command
+ Just give this class a new name, more inline with the name of the
+ sub-classes. I've also updated mi_cmd_up to mi_command_up in
+ mi-cmds.c inline with this new naming scheme.
+
+ There should be no user visible changes after this commit.
+
+2021-12-14 Jan Vrany <jan.vrany@labware.com>
+
+ gdb/mi: use separate classes for different types of MI command
+ This commit changes the infrastructure in mi-cmds.{c,h} to add new
+ sub-classes for the different types of MI command. Instances of these
+ sub-classes are then created and added into mi_cmd_table.
+
+ The existing mi_cmd class becomes the abstract base class, this has an
+ invoke method and takes care of the suppress notifications handling,
+ before calling a do_invoke virtual method which is implemented by all
+ of the sub-classes.
+
+ There's currently two different sub-classes, one of pure MI commands,
+ and a second for MI commands that delegate to CLI commands.
+
+ There should be no user visible changes after this commit.
+
+2021-12-14 Andrew Burgess <aburgess@redhat.com>
+
+ gdb/mi: int to bool conversion in mi_execute_cli_command
+ Change an argument of mi_execute_cli_command from int to bool. Update
+ the callers to take this into account. Within mi_execute_cli_command,
+ update a comparison of a pointer to 0 with a comparison to nullptr,
+ and add an assert, if we are not using the argument string then the
+ string should be nullptr. Also removed a cryptic 'gdb_????' comment,
+ which isn't really helpful.
+
+ There should be no user visible changes after this commit.
+
+2021-12-14 Jan Vrany <jan.vrany@labware.com>
+
+ gdb/mi: use std::map for MI commands in mi-cmds.c
+ This changes the hashmap used in mi-cmds.c from a custom structure to
+ std::map. Not only is replacing a custom container with a standard
+ one an improvement, but using std::map will make it easier to
+ dynamically add commands; which is something that is planned for a
+ later series, where we will allow MI commands to be implemented in
+ Python.
+
+ There should be no user visible changes after this commit.
+
+2021-12-14 Jan Vrany <jan.vrany@labware.com>
+
+ gdb/mi: rename mi_lookup to mi_cmd_lookup
+ Lets give this function a more descriptive name. I've also improved
+ the comments in the header and source files.
+
+ There should be no user visible changes after this commit.
+
+2021-12-14 Nelson Chu <nelson.chu@sifive.com>
+
+ RISC-V: Added ld testcases for the medlow and medany code models.
+ There are two linker scripts, code-model-01.ld and code-model-02.ld,
+ which are corresponding to the two different memory layouts,
+
+ * code-model-01.ld: the text section is in the 32-bit address range, but
+ the data section is far away from the text section, which means the data
+ section is over the 32-bit address range.
+
+ * code-model-02.ld: the text section is over the 32-bit address range, but
+ the data section is placed nearly zero address.
+
+ We use the two linker scripts, to test the current medlow and medany behaviors
+ of GNU ld, including the weak symbol references and the relaxations behaviors.
+ Besides, these testcases also show the limits of the current medlow and medany
+ code models, that is - we may get the truncated to fit errors when linking
+ with the above two linker scripts.
+
+ ld/
+ * testsuite/ld-riscv-elf/code-model-01.ld: New testcases to test the
+ behaviors of the current medlow and medany code models.
+ * testsuite/ld-riscv-elf/code-model-02.ld: Likewise.
+ * testsuite/ld-riscv-elf/code-model-medany-01.d: Likewise.
+ * testsuite/ld-riscv-elf/code-model-medany-02.d: Likewise.
+ * testsuite/ld-riscv-elf/code-model-medany-weakref-01.d: Likewise.
+ * testsuite/ld-riscv-elf/code-model-medany-weakref-02.d: Likewise.
+ * testsuite/ld-riscv-elf/code-model-medlow-01.d: Likewise.
+ * testsuite/ld-riscv-elf/code-model-medlow-02.d: Likewise.
+ * testsuite/ld-riscv-elf/code-model-medlow-weakref-01.d: Likewise.
+ * testsuite/ld-riscv-elf/code-model-medlow-weakref-02.d: Likewise.
+ * testsuite/ld-riscv-elf/code-model-relax-medany-01.d: Likewise.
+ * testsuite/ld-riscv-elf/code-model-relax-medany-02.d: Likewise.
+ * testsuite/ld-riscv-elf/code-model-relax-medany-weakref-01.d: Likewise.
+ * testsuite/ld-riscv-elf/code-model-relax-medany-weakref-02.d: Likewise.
+ * testsuite/ld-riscv-elf/code-model-relax-medlow-01.d: Likewise.
+ * testsuite/ld-riscv-elf/code-model-relax-medlow-02.d: Likewise.
+ * testsuite/ld-riscv-elf/code-model-relax-medlow-weakref-01.d: Likewise.
+ * testsuite/ld-riscv-elf/code-model-relax-medlow-weakref-02.d: Likewise.
+ * testsuite/ld-riscv-elf/code-model.s: Likewise.
+ * testsuite/ld-riscv-elf/ld-riscv-elf.exp: Updated.
+
+2021-12-14 GDB Administrator <gdbadmin@sourceware.org>
+
+ Automatic date update in version.in
+
+2021-12-13 H.J. Lu <hjl.tools@gmail.com>
+
+ x86: Adjust linker tests for --disable-separate-code
+ Adjust linker tests for linker configured with --disable-separate-code:
+
+ 1. Update expected outputs.
+ 2. Pass -z max-page-size=0x1000 -z separate-code" to linker.
+
+ * testsuite/ld-i386/report-reloc-1.l: Updated.
+ * testsuite/ld-x86-64/report-reloc-1.l: Likewise.
+ * testsuite/ld-x86-64/pe-x86-64.exp: Pass
+ "-z max-page-size=0x1000 -z separate-code" to linker.
+ * testsuite/ld-x86-64/pr19609-4e.d: Likewise.
+ * testsuite/ld-x86-64/pr19609-6a.d: Likewise.
+ * testsuite/ld-x86-64/pr19609-6b.d: Likewise.
+ * testsuite/ld-x86-64/pr19609-7b.d: Likewise.
+ * testsuite/ld-x86-64/pr19609-7d.d: Likewise.
+
+2021-12-13 Carl Love <cel@us.ibm.com>
+
+ gdb: Powerpc mark xfail in gdb.base/catch-syscall.exp
+ Powerpc is not reporting the
+
+ Catchpoint 1 (returned from syscall execve), ....
+
+ as expected. The issue appears to be with the kernel not returning the
+ expected result. This patch marks the test failure as an xfail.
+
+ Bug: https://sourceware.org/bugzilla/show_bug.cgi?id=28623
+
+2021-12-13 Andrew Burgess <andrew.burgess@embecosm.com>
+
+ gdb: improve reuse of value contents when fetching array elements
+ While working on a Python script, which was interacting with a remote
+ target, I noticed some weird slowness in GDB. In my program I had a
+ structure something like this:
+
+ struct foo_t
+ {
+ int array[5];
+ };
+
+ struct foo_t global_foo;
+
+ Then in the Python script I was fetching a complete copy of global
+ foo, like:
+
+ val = gdb.parse_and_eval('global_foo')
+ val.fetch_lazy()
+
+ Then I would work with items in foo_t.array, like:
+
+ print(val['array'][1])
+
+ I called the fetch_lazy method specifically because I knew I was going
+ to end up accessing almost all of the contents of val, and so I wanted
+ GDB to do a single remote protocol call to fetch all the contents in
+ one go, rather than trying to do lazy fetches for a couple of bytes at
+ a time.
+
+ What I observed was that, after the fetch_lazy call, GDB does,
+ correctly, fetch the entire contents of global_foo, including all of
+ the contents of array, however, when I access val.array[1], GDB still
+ goes and fetches the value of this element from the remote target.
+
+ What's going on is that in valarith.c, in value_subscript, for C like
+ languages, we always end up treating the array value as a pointer, and
+ then doing value_ptradd, and value_ind, the second of these calls
+ always returns a lazy value.
+
+ My guess is that this approach allows us to handle indexing off the
+ end of an array, when working with zero element arrays, or when
+ indexing a raw pointer as an array. And, I agree, that in these
+ cases, where, even when the original value is non-lazy, we still will
+ not have the content of the array loaded, we should be using the
+ value_ind approach.
+
+ However, for cases where we do have the array contents loaded, and we
+ do know the bounds of the array, I think we should be using
+ value_subscripted_rvalue, which is what we use for non C like
+ languages.
+
+ One problem I did run into, exposed by gdb.base/charset.exp, was that
+ value_subscripted_rvalue stripped typedefs from the element type of
+ the array, which means the value returned will not have the same type
+ as an element of the array, but would be the raw, non-typedefed,
+ type. In charset.exp we got back an 'int' instead of a
+ 'wchar_t' (which is a typedef of 'int'), and this impacts how we print
+ the value. Removing typedefs from the resulting value just seems
+ wrong, so I got rid of that, and I don't see any test regressions.
+
+ With this change in place, my original Python script is now doing no
+ additional memory accesses, and its performance increases about 10x!
+
+2021-12-13 Andrew Burgess <aburgess@redhat.com>
+
+ gdb: update gdb-gdb.py.in for latest changes to struct field
+ This commit updates uses of 'loc' and 'loc_kind' to 'm_loc' and
+ 'm_loc_kind' respectively, in gdb-gdb.py.in, which is required after
+ this commit:
+
+ commit cd3f655cc7a55437a05aa8e7b1fcc9051b5fe404
+ Date: Thu Sep 30 22:38:29 2021 -0400
+
+ gdb: add accessors for field (and call site) location
+
+ I have also incorporated this change:
+
+ https://sourceware.org/pipermail/gdb-patches/2021-September/182171.html
+
+ Which means we print 'm_name' instead of 'name' when displaying the
+ 'm_name' member variable.
+
+ Finally, I have also added support for the new TYPE_SPECIFIC_INT
+ fields, which were added with this commit:
+
+ commit 20a5fcbd5b28cca88511ac5a9ad5e54251e8fa6d
+ Date: Wed Sep 23 09:39:24 2020 -0600
+
+ Handle bit offset and bit size in base types
+
+ I updated the gdb.gdb/python-helper.exp test to cover all of these
+ changes.
+
+2021-12-13 Tankut Baris Aktemur <tankut.baris.aktemur@intel.com>
+
+ gdbserver/linux-low: replace direct assignment to current_thread
+ Use scoped_restore_current_thread and switch_to_thread in
+ linux_process_target::wait_for_sigstop.
+
+2021-12-13 Tankut Baris Aktemur <tankut.baris.aktemur@intel.com>
+
+ gdbserver: replace direct assignments to current_thread
+ Replace the direct assignments to current_thread with
+ switch_to_thread. Use scoped_restore_current_thread when appropriate.
+ There is one instance remaining in linux-low.cc's wait_for_sigstop.
+ This will be handled in a separate patch.
+
+ Regression-tested on X86-64 Linux using the native-gdbserver and
+ native-extended-gdbserver board files.
+
+2021-12-13 Tankut Baris Aktemur <tankut.baris.aktemur@intel.com>
+
+ gdbserver: introduce scoped_restore_current_thread and switch_to_thread
+ Introduce a class for restoring the current thread and a function to
+ switch to the given thread. This is a preparation for a refactoring
+ that aims to remove direct assignments to 'current_thread'.
+
+2021-12-13 Andrew Burgess <aburgess@redhat.com>
+
+ gdb: make post_startup_inferior a virtual method on inf_ptrace_target
+ While working on a later patch that required me to understand how GDB
+ starts up inferiors, I was confused by the
+ target_ops::post_startup_inferior method.
+
+ The post_startup_inferior target function is only called from
+ inf_ptrace_target::create_inferior.
+
+ Part of the target class hierarchy looks like this:
+
+ inf_child_target
+ |
+ '-- inf_ptrace_target
+ |
+ |-- linux_nat_target
+ |
+ |-- fbsd_nat_target
+ |
+ |-- nbsd_nat_target
+ |
+ |-- obsd_nat_target
+ |
+ '-- rs6000_nat_target
+
+ Every sub-class of inf_ptrace_target, except rs6000_nat_target,
+ implements ::post_startup_inferior. The rs6000_nat_target picks up
+ the implementation of ::post_startup_inferior not from
+ inf_ptrace_target, but from inf_child_target.
+
+ No descendent of inf_child_target, outside the inf_ptrace_target
+ sub-tree, implements ::post_startup_inferior, which isn't really
+ surprising, as they would never see the method called (remember, the
+ method is only called from inf_ptrace_target::create_inferior).
+
+ What I find confusing is the role inf_child_target plays in
+ implementing, what is really a helper function for just one of its
+ descendents.
+
+ In this commit I propose that we formally make ::post_startup_inferior
+ a helper function of inf_ptrace_target. To do this I will remove the
+ ::post_startup_inferior from the target_ops API, and instead make this
+ a protected, pure virtual function on inf_ptrace_target.
+
+ I'll remove the empty implementation of ::post_startup_inferior from
+ the inf_child_target class, and add a new empty implementation to the
+ rs6000_nat_target class.
+
+ All the other descendents of inf_ptrace_target already provide an
+ implementation of this method and so don't need to change beyond
+ making the method protected within their class declarations.
+
+ To me, this makes much more sense now. The helper function, which is
+ only called from within the inf_ptrace_target class, is now a part of
+ the inf_ptrace_target class.
+
+ The only way in which this change is visible to a user is if the user
+ turns on 'set debug target 1'. With this debug flag on, prior to this
+ patch the user would see something like:
+
+ -> native->post_startup_inferior (...)
+ <- native->post_startup_inferior (2588939)
+
+ After this patch these lines are no longer present, as the
+ post_startup_inferior is no longer a top level target method. For me,
+ this is an acceptable change.
+
+2021-12-13 Andrew Burgess <aburgess@redhat.com>
+
+ gdb: have mips_nbsd_nat_target inherit from nbsd_nat_target
+ While working on another patch I had reason to look at
+ mips-netbsd-nat.c, and noticed that the class mips_nbsd_nat_target
+ inherits directly from inf_ptrace_target.
+
+ This is a little strange as alpha_bsd_nat_target,
+ arm_netbsd_nat_target, hppa_nbsd_nat_target, m68k_bsd_nat_target,
+ ppc_nbsd_nat_target, sh_nbsd_nat_target, and vax_bsd_nat_target all
+ inherit from nbsd_nat_target.
+
+ Originally, in this commit:
+
+ commit f6ac5f3d63e03a81c4ff3749aba234961cc9090e
+ Date: Thu May 3 00:37:22 2018 +0100
+
+ Convert struct target_ops to C++
+
+ When the target tree was converted to C++, all of the above classes
+ inherited from inf_ptrace_target except for hppa_nbsd_nat_target,
+ which was the only class that originally inherited from
+ nbsd_nat_target.
+
+ Later on all the remaining targets (except mips) were converted to
+ inherit from nbsd_nat_target, these are the commits:
+
+ commit 4fed520be264b60893aa674071947890f8172915
+ Date: Sat Mar 14 16:05:24 2020 +0100
+
+ Inherit alpha_netbsd_nat_target from nbsd_nat_target
+
+ commit 6018d381a00515933016c539d2fdc18ad0d304b8
+ Date: Sat Mar 14 14:50:51 2020 +0100
+
+ Inherit arm_netbsd_nat_target from nbsd_nat_target
+
+ commit 01a801176ea15ddfc988cade2e3d84c3b0abfec3
+ Date: Sat Mar 14 16:54:42 2020 +0100
+
+ Inherit m68k_bsd_nat_target from nbsd_nat_target
+
+ commit 9faa006d11a5e08264a007463435f84b77864c9c
+ Date: Thu Mar 19 14:52:57 2020 +0100
+
+ Inherit ppc_nbsd_nat_target from nbsd_nat_target
+
+ commit 9809762324491b851332ce600ae9bde8dd34f601
+ Date: Tue Mar 17 15:07:39 2020 +0100
+
+ Inherit sh_nbsd_nat_target from nbsd_nat_target
+
+ commit d5be5fa4207da00d039a1d5a040ba316e7092cbd
+ Date: Sat Mar 14 13:21:58 2020 +0100
+
+ Inherit vax_bsd_nat_target from nbsd_nat_target
+
+ I could only find mailing list threads for ppc and sh in the archive ,
+ and unfortunately, none of the commits has any real detail that might
+ explain why mips was missed out, the only extra context I could find
+ was this message:
+
+ https://sourceware.org/pipermail/gdb-patches/2020-March/166853.html
+
+ Which says that "proper" OS support is going to be added to
+ nbsd_nat_target, hence the need to inherit from that class.
+
+ My guess is that leaving mips_nbsd_nat_target unchanged was an
+ oversight, so, in this commit, I propose changing mips_nbsd_nat_target
+ to inherit from nbsd_nat_target just like all the other nbsd targets.
+
+ My motivation for this patch relates to the post_startup_inferior
+ target method. In a future commit I want to change how this method is
+ handled. Currently the mips_nbsd_nat_target will pick up the empty
+ implementation of inf_child_target::post_startup_inferior rather than
+ the version in netbsd-nat.c. This feels like a bug to me, as surely,
+ enabling of proc events is something that would need to be done for
+ all netbsd targets, regardless of architecture.
+
+ In my future patch I have a choice then, either (a) add a new, empty
+ implementation of post_startup_inferior to mips_nbsd_nat_target,
+ or (b) this commit, have mips_nbsd_nat_target inherit from
+ nbsd_nat_target. Option (b) seems like the right way to go, hence,
+ this commit.
+
+ I've done absolutely no testing for this change, not even building it,
+ as that would require at least an environment in which I can x-build
+ mips-netbsd applications, which I have no idea how to set up.
+
+2021-12-13 Andrew Burgess <aburgess@redhat.com>
+
+ gdb: only include mips and riscv targets if building with 64-bit bfd
+ While testing another patch I was trying to build different
+ configurations of GDB, and, during one test build I ran into a
+ problem, I configured with `--enable-targets=all
+ --host=i686-w64-mingw32` and saw this error while linking GDB:
+
+ .../i686-w64-mingw32/bin/ld: mips-tdep.o: in function `mips_gdbarch_init':
+ .../src/gdb/mips-tdep.c:8730: undefined reference to `disassembler_options_mips'
+ .../i686-w64-mingw32/bin/ld: riscv-tdep.o: in function `riscv_gdbarch_init':
+ .../src/gdb/riscv-tdep.c:3851: undefined reference to `disassembler_options_riscv'
+
+ So the `disassembler_options_mips` and `disassembler_options_riscv`
+ symbols are missing.
+
+ This turns out to be because mips-dis.c and riscv-dis.c, in which
+ these symbols are defined, are in the TARGET64_LIBOPCODES_CFILES list
+ in opcodes/Makefile.am, these files are only built when we are
+ building with a 64-bit bfd.
+
+ If we look further, into bfd/Makefile.am, we can see that all the
+ files matching elf*-riscv.lo are in the BFD64_BACKENDS list, as are
+ the elf*-mips.lo files, and (I know because I tried), the two
+ disassemblers do, not surprisingly, depend on features supplied from
+ libbfd.
+
+ So, though we can build most of GDB just fine for riscv and mips with
+ a 32-bit bfd, if I understand correctly, the final GDB
+ executable (assuming we could get it to link) would not understand
+ these architectures at the bfd level, nor would there be any
+ disassembler available. This sounds like a pretty useless GDB to me.
+
+ So, in this commit, I move the riscv and mips targets into GDB's list
+ of targets that require a 64-bit bfd. After this I can build GDB just
+ fine with the configure options given above.
+
+ This was discussed on the mailing list in a couple of threads:
+
+ https://sourceware.org/pipermail/gdb-patches/2021-December/184365.html
+ https://sourceware.org/pipermail/binutils/2021-November/118498.html
+
+ and it is agreed, that it is unfortunate that the 32-bit riscv and
+ 32-bit mips targets require a 64-bit bfd. If in the future this
+ situation ever changes then it would be expected that some (or all) of
+ this patch would be reverted. Until then though, this patch allows
+ GDB to build when configured with --enable-targets=all, and when using
+ a 32-bit libbfd.
+
+2021-12-13 GDB Administrator <gdbadmin@sourceware.org>
+
+ Automatic date update in version.in
+
+2021-12-12 Tom Tromey <tom@tromey.com>
+
+ C++-ify path substitution code
+ I found some uses of xfree in the path substitution code in source.c.
+ C++-ifying struct substitute_path_rule both simplifies the code and
+ removes manual memory management.
+
+ Regression tested on x86-64 Fedora 34.
+
+2021-12-12 GDB Administrator <gdbadmin@sourceware.org>
+
+ Automatic date update in version.in
+
+2021-12-11 Alan Modra <amodra@gmail.com>
+
+ [GOLD] PowerPC64 @notoc in non-power10 code
+ Gold version of commit 7aba54da42.
+
+ elfcpp/
+ * powerpc.h (R_PPC64_REL24_P9NOTOC): Define.
+ gold/
+ * powerpc.cc (Target_powerpc::maybe_skip_tls_get_addr_call,
+ is_branch_reloc, max_branch_delta): Handle R_PPC64_REL24_P9NOTOC.
+ (Target_powerpc::Branch_info::make_stub): Likewise.
+ (struct Plt_stub_ent): Add p9notoc_, p9off_, tsize_.
+ (struct Branch_stub_ent): Add p9notoc_, p9off_.
+ (Stub_table::add_plt_call_entry): Handle R_PPC64_REL24_P9NOTOC.
+ (Stub_table::add_long_branch_entry): Likewise.
+ (Stub_table::add_eh_frame): Likewise.
+ (Stub_table::plt_call_size): Return aligned size. Adjust callers.
+ Handle p9notoc_ sizing.
+ (Stub_table::do_write): Write out p9notoc_ stubs.
+ (Target_powerpc::Scan::get_reference_flags, local, global):
+ Handle R_PPC64_REL24_P9NOTOC.
+ (Target_powerpc::Relocate::relocate): Likewise.
+
+2021-12-11 H.J. Lu <hjl.tools@gmail.com>
+
+ Don't return the main file as the separate debug info
+ On Fedora 35,
+
+ $ readelf -d /usr/bin/npc
+
+ caused readelf to run out of stack since load_separate_debug_info
+ returned the input main file as the separate debug info:
+
+ (gdb) bt
+ #0 load_separate_debug_info (
+ main_filename=main_filename@entry=0x510f50 "/export/home/hjl/.cache/debuginfod_client/dcc33c51c49e7dafc178fdb5cf8bd8946f965295/debuginfo",
+ xlink=xlink@entry=0x4e5180 <debug_displays+4480>,
+ parse_func=parse_func@entry=0x431550 <parse_gnu_debuglink>,
+ check_func=check_func@entry=0x432ae0 <check_gnu_debuglink>,
+ func_data=func_data@entry=0x7fffffffdb60, file=file@entry=0x51d430)
+ at /export/gnu/import/git/sources/binutils-gdb/binutils/dwarf.c:11057
+ #1 0x000000000043328d in check_for_and_load_links (file=0x51d430,
+ filename=0x510f50 "/export/home/hjl/.cache/debuginfod_client/dcc33c51c49e7dafc178fdb5cf8bd8946f965295/debuginfo")
+ at /export/gnu/import/git/sources/binutils-gdb/binutils/dwarf.c:11381
+ #2 0x00000000004332ae in check_for_and_load_links (file=0x51b070,
+ filename=0x518dd0 "/export/home/hjl/.cache/debuginfod_client/dcc33c51c49e7dafc178fdb5cf8bd8946f965295/debuginfo")
+
+ Return NULL if the separate debug info is the same as the input main
+ file to avoid infinite recursion.
+
+ PR binutils/28679
+ * dwarf.c (load_separate_debug_info): Don't return the input
+ main file.
+
+2021-12-11 Alan Modra <amodra@gmail.com>
+
+ Don't edit bogus sh_link on reading relocatable objects (Oracle fix)
+ This reverts a 1995 fix to handle bogus object files. Presumably such
+ object files have long gone.
+
+ * elf.c (bfd_section_from_shdr): Remove old hack for Oracle
+ libraries.
+
+2021-12-11 GDB Administrator <gdbadmin@sourceware.org>
+
+ Automatic date update in version.in
+
+2021-12-10 Jan Vrany <jan.vrany@labware.com>
+
+ gdb/testsuite: respect GDBSERVER variable in remote-stdio-gdbserver "board"
+ The comment on top of gdb/testsuite/boards/remote-stdio-gdbserver.exp says
+ that user can specify path to gdbserver on remote system by setting
+ GDBSERVER variable. However, this variable was ignored and /usr/bin/gdbserver
+ was used unconditionally.
+
+ This commit updates the code to respect GDBSERVER if set and fall back to
+ /usr/bin/gdbserver if not.
+
+2021-12-10 Simon Marchi <simon.marchi@polymtl.ca>
+
+ Revert "gdbsupport: remove unnecessary `#ifndef IN_PROCESS_AGENT`"
+ This reverts commit fe72c32765e1190c8a17d309fc3a7e1882d6a430.
+
+ It turns out it was wrong, libinproctrace.so does build its own
+ gdbsupport/tdesc.cc. This broke the build:
+
+ make[1]: Entering directory '/home/simark/build/binutils-gdb-one-target/gdbserver'
+ CXXLD libinproctrace.so
+ /usr/bin/ld: gdbsupport/tdesc-ipa.o: in function `print_xml_feature::visit_pre(target_desc const*)':
+ /home/simark/src/binutils-gdb/gdbserver/../gdbsupport/tdesc.cc:407: undefined reference to `tdesc_architecture_name(target_desc const*)'
+ /usr/bin/ld: /home/simark/src/binutils-gdb/gdbserver/../gdbsupport/tdesc.cc:408: undefined reference to `tdesc_architecture_name(target_desc const*)'
+ /usr/bin/ld: /home/simark/src/binutils-gdb/gdbserver/../gdbsupport/tdesc.cc:411: undefined reference to `tdesc_osabi_name(target_desc const*)'
+ /usr/bin/ld: /home/simark/src/binutils-gdb/gdbserver/../gdbsupport/tdesc.cc:416: undefined reference to `tdesc_compatible_info_list(target_desc const*)'
+ /usr/bin/ld: /home/simark/src/binutils-gdb/gdbserver/../gdbsupport/tdesc.cc:418: undefined reference to `tdesc_compatible_info_arch_name(std::unique_ptr<tdesc_compatible_info, std::default_delete<tdesc_compatible_info> > const&)'
+
+2021-12-10 GDB Administrator <gdbadmin@sourceware.org>
+
+ Automatic date update in version.in
+
+2021-12-09 Alan Modra <amodra@gmail.com>
+
+ PR28674, objdump crash
+ Not returning an error indication here leaves the attribute
+ uninitialised, which then leads to intemperate behaviour.
+
+ PR 28674
+ * dwarf2.c (read_attribute_value): Return NULL on trying to read
+ past end of attributes.
+
+2021-12-09 Alan Modra <amodra@gmail.com>
+
+ Set sh_link for reloc sections created as normal sections
+ binutils-all/strip-13 and binutils-all/strip-14 tests create
+ SHT_REL/SHT_RELA sections by hand. These don't have sh_link set to
+ the .symtab section as they should, leading to readelf warnings if you
+ happen to be looking at the object files.
+
+ * elf.c (assign_section_numbers): Formatting. Set sh_link for
+ reloc sections created as normal sections in relocatable
+ objects.
+
+2021-12-09 Simon Marchi <simon.marchi@efficios.com>
+
+ gdbsupport: remove unnecessary `#ifndef IN_PROCESS_AGENT`
+ I suppose this code was copied from GDBserver and this ifndef was left
+ there. As far as I know, IN_PROCESS_AGENT will never be defined when
+ building this file, so we can remove this.
+
+ Change-Id: I84fc408e330b3a29106df830a09342861cadbaf6
+
+2021-12-09 Simon Marchi <simon.marchi@polymtl.ca>
+
+ gdb/microblaze-tdep.c: fix -Wunused-but-set-variable
+ Fix this, seen when building with clang 14:
+
+ CXX microblaze-tdep.o
+ /home/simark/src/binutils-gdb/gdb/microblaze-tdep.c:207:7: error: variable 'flags' set but not used [-Werror,-Wunused-but-set-variable]
+ int flags = 0;
+ ^
+
+ Change-Id: I59f726ed33e924912748bc475b6fd9a9394fc0d0
+
+2021-12-09 Simon Marchi <simon.marchi@polymtl.ca>
+
+ gdb/csky-tdep.c: fix -Wunused-but-set-variable error
+ Fix these, seen when building with clang 14:
+
+ CXX csky-tdep.o
+ /home/simark/src/binutils-gdb/gdb/csky-tdep.c:332:7: error: variable 'need_dummy_stack' set but not used [-Werror,-Wunused-but-set-variable]
+ int need_dummy_stack = 0;
+ ^
+ /home/simark/src/binutils-gdb/gdb/csky-tdep.c:805:12: error: variable 'offset' set but not used [-Werror,-Wunused-but-set-variable]
+ int offset = 0;
+ ^
+
+ Change-Id: I6703bcb50e83c50083f716f4084ef6aa30d659c4
+
+2021-12-09 Simon Marchi <simon.marchi@polymtl.ca>
+
+ gdb/testsuite: fix default behavior of runto
+ The documented behavior of proc runto is to not emit a PASS when
+ succeeding to to run to the specified location, but emit a FAIL when
+ failing to do so. I suppose the intent is that it won't pollute the
+ results normally passing tests (although I don't see why we would care),
+ but make visible any problems.
+
+ However, it seems like the implementation makes it default to never
+ print anything. "no-message" is prependend to "args", so if "message"
+ is not passed, we will always take the path that sets print_fail to 0,
+ which will silence any failure.
+
+ This unfortunately means that tests relying on runto_main won't emit a
+ FAIL if failing to run to main. And since commit 4dfef5be6812
+ ("gdb/testsuite: make runto_main not pass no-message to runto"), tests
+ don't emit a FAIL themselves when failing to run to main. This means
+ that tests failing to run to main just fail silently, and that's bad.
+
+ This can be reproduced by hacking gdb.base/template.exp like so:
+
+ diff --git a/gdb/testsuite/gdb.base/template.c b/gdb/testsuite/gdb.base/template.c
+ index bcf39c377d92..052be5b79d73 100644
+ --- a/gdb/testsuite/gdb.base/template.c
+ +++ b/gdb/testsuite/gdb.base/template.c
+ @@ -15,6 +15,14 @@
+ You should have received a copy of the GNU General Public License
+ along with this program. If not, see <http://www.gnu.org/licenses/>. */
+
+ +#include <stdlib.h>
+ +
+ +__attribute__((constructor))
+ +static void c (void)
+ +{
+ + exit (1);
+ +}
+ +
+ int
+ main (void)
+ {
+
+ Running the modified gdb.base/template.exp shows that it exits without
+ printing any result.
+
+ Remove the line that prepends no-message to args, that should make
+ runto's behavior match its documentation.
+
+ This patch will appear to add many failures, but in reality they already
+ existed, they were just silenced.
+
+ Change-Id: I2a730d5bc72b6ef0698cd6aad962d9902aa7c3d6
+
+2021-12-09 Carl Love <cel@us.ibm.com>
+
+ gdb fix elfv1 Powerpc gdb.dwarf2/frame-inlined-in-outer-frame.exp
+ On ELFv1, the _start symbol must point to the *function descriptor* (in
+ the .opd section), not to the function code (in the .text section) like
+ with ELFv2 and other architectures.
+
+2021-12-09 Tom de Vries <tdevries@suse.de>
+
+ [gdb/testsuite] Fix gdb.base/maint.exp with -readnow
+ With test-case gdb.base/maint.exp and target board -readnow, I run into:
+ ...
+ FAIL: gdb.base/maint.exp: maint info line-table w/o a file name
+ ...
+
+ The problem is that this and other regexps anchored using '^':
+ ...
+ -re "^$gdb_prompt $" {
+ ...
+ don't trigger because other regexps don't consume the entire preceding line.
+
+ This is partly due to the addition of the IS-STMT column.
+
+ Fix this by making the regexps consume entire lines.
+
+ Tested on x86_64-linux with native and target board readnow, as well as
+ check-read1 and check-readmore.
+
+2021-12-09 Tom de Vries <tdevries@suse.de>
+
+ [gdb/testsuite] Fix gdb.base/include-main.exp with -readnow
+ With test-case gdb.base/include-main.exp and target board readnow, I run into:
+ ...
+ FAIL: gdb.base/include-main.exp: maint info symtab
+ ...
+
+ The corresponding check in gdb.base/include-main.exp:
+ ...
+ gdb_test_no_output "maint info symtab"
+ ...
+ checks that no CU was expanded, while -readnow ensures that all CUs are
+ expanded.
+
+ Fix this by skipping the check with -readnow.
+
+ Tested on x86_64-linux, with native and target board readnow.
+
+2021-12-09 Nelson Chu <nelson.chu@sifive.com>
+
+ RISC-V: Clarify the behavior of .option arch directive.
+ * To be consistent with -march option, removed the "=" operator when
+ user want to reset the whole architecture string. So the formats are,
+
+ .option arch, +<extension><version>, ...
+ .option arch, -<extension>
+ .option arch, <ISA string>
+
+ * Don't allow to add or remove the base extensions in the .option arch
+ directive. Instead, users should reset the whole architecture string
+ while they want to change the base extension.
+
+ * The operator "+" won't update the version of extension, if the
+ extension is already in the subset list.
+
+ bfd/
+ * elfxx-riscv.c (riscv_add_subset): Don't update the version
+ if the extension is already in the subset list.
+ (riscv_update_subset): To be consistent with -march option,
+ removed the "=" operator when user want to reset the whole
+ architecture string. Besides, Don't allow to add or remove
+ the base extensions in the .option arch directive.
+ gas/
+ * testsuite/gas/riscv/option-arch-01.s: Updated since we cannot
+ add or remove the base extensions in the .option arch directive.
+ * testsuite/gas/riscv/option-arch-02.s: Likewise.
+ * testsuite/gas/riscv/option-arch-fail.l: Likewise.
+ * testsuite/gas/riscv/option-arch-fail.s: Likewise.
+ * testsuite/gas/riscv/option-arch-01a.d: Set -misa-spec=2.2.
+ * testsuite/gas/riscv/option-arch-01b.d: Likewise.
+ * testsuite/gas/riscv/option-arch-02.d: Updated since the .option
+ arch, + won't change the version of extension, if the extension is
+ already in the subset list.
+ * testsuite/gas/riscv/option-arch-03.s: Removed the "=" operator
+ when resetting the whole architecture string.
+
+2021-12-09 Mike Frysinger <vapier@gentoo.org>
+
+ sim: use ## for automake comments
+ The ## marker tells automake to not include the comment in its
+ generated output, so use that in most places where the comment
+ only makes sense in the inputs.
+
+2021-12-09 Simon Marchi <simon.marchi@efficios.com>
+
+ gdb, gdbserver: detach fork child when detaching from fork parent
+ While working with pending fork events, I wondered what would happen if
+ the user detached an inferior while a thread of that inferior had a
+ pending fork event. What happens with the fork child, which is
+ ptrace-attached by the GDB process (or by GDBserver), but not known to
+ the core? Sure enough, neither the core of GDB or the target detach the
+ child process, so GDB (or GDBserver) just stays ptrace-attached to the
+ process. The result is that the fork child process is stuck, while you
+ would expect it to be detached and run.
+
+ Make GDBserver detach of fork children it knows about. That is done in
+ the generic handle_detach function. Since a process_info already exists
+ for the child, we can simply call detach_inferior on it.
+
+ GDB-side, make the linux-nat and remote targets detach of fork children
+ known because of pending fork events. These pending fork events can be
+ stored in:
+
+ - thread_info::pending_waitstatus, if the core has consumed the event
+ but then saved it for later (for example, because it got the event
+ while stopping all threads, to present an all-stop stop on top of a
+ non-stop target)
+ - thread_info::pending_follow: if we ran to a "catch fork" and we
+ detach at that moment
+
+ Additionally, pending fork events can be in target-specific fields:
+
+ - For linux-nat, they can be in lwp_info::status and
+ lwp_info::waitstatus.
+ - For the remote target, they could be stored as pending stop replies,
+ saved in `remote_state::notif_state::pending_event`, if not
+ acknowledged yet, or in `remote_state::stop_reply_queue`, if
+ acknowledged. I followed the model of remove_new_fork_children for
+ this: call remote_notif_get_pending_events to process /
+ acknowledge any unacknowledged notification, then look through
+ stop_reply_queue.
+
+ Update the gdb.threads/pending-fork-event.exp test (and rename it to
+ gdb.threads/pending-fork-event-detach.exp) to try to detach the process
+ while it is stopped with a pending fork event. In order to verify that
+ the fork child process is correctly detached and resumes execution
+ outside of GDB's control, make that process create a file in the test
+ output directory, and make the test wait $timeout seconds for that file
+ to appear (it happens instantly if everything goes well).
+
+ This test catches a bug in linux-nat.c, also reported as PR 28512
+ ("waitstatus.h:300: internal-error: gdb_signal target_waitstatus::sig()
+ const: Assertion `m_kind == TARGET_WAITKIND_STOPPED || m_kind ==
+ TARGET_WAITKIND_SIGNALLED' failed.). When detaching a thread with a
+ pending event, get_detach_signal unconditionally fetches the signal
+ stored in the waitstatus (`tp->pending_waitstatus ().sig ()`). However,
+ that is only valid if the pending event is of type
+ TARGET_WAITKIND_STOPPED, and this is now enforced using assertions (iit
+ would also be valid for TARGET_WAITKIND_SIGNALLED, but that would mean
+ the thread does not exist anymore, so we wouldn't be detaching it). Add
+ a condition in get_detach_signal to access the signal number only if the
+ wait status is of kind TARGET_WAITKIND_STOPPED, and use GDB_SIGNAL_0
+ instead (since the thread was not stopped with a signal to begin with).
+
+ Add another test, gdb.threads/pending-fork-event-ns.exp, specifically to
+ verify that we consider events in pending stop replies in the remote
+ target. This test has many threads constantly forking, and we detach
+ from the program while the program is executing. That gives us some
+ chance that we detach while a fork stop reply is stored in the remote
+ target. To verify that we correctly detach all fork children, we ask
+ the parent to exit by sending it a SIGUSR1 signal and have it write a
+ file to the filesystem before exiting. Because the parent's main thread
+ joins the forking threads, and the forking threads wait for their fork
+ children to exit, if some fork child is not detach by GDB, the parent
+ will not write the file, and the test will time out. If I remove the
+ new remote_detach_pid calls in remote.c, the test fails eventually if I
+ run it in a loop.
+
+ There is a known limitation: we don't remove breakpoints from the
+ children before detaching it. So the children, could hit a trap
+ instruction after being detached and crash. I know this is wrong, and
+ it should be fixed, but I would like to handle that later. The current
+ patch doesn't fix everything, but it's a step in the right direction.
+
+ Change-Id: I6d811a56f520e3cb92d5ea563ad38976f92e93dd
+ Bug: https://sourceware.org/bugzilla/show_bug.cgi?id=28512
+
+2021-12-09 Simon Marchi <simon.marchi@efficios.com>
+
+ gdb: move clearing of tp->pending_follow to follow_fork_inferior
+ A following patch will change targets so that when they detach an
+ inferior, they also detach any pending fork children this inferior may
+ have. While doing this, I hit a case where we couldn't differentiate
+ two cases, where in one we should detach the fork detach but not in the
+ other.
+
+ Suppose we continue past a fork with "follow-fork-mode == child" &&
+ "detach-on-fork on". follow_fork_inferior calls target_detach to detach
+ the parent. In that case the target should not detach the fork
+ child, as we'll continue debugging the child. As of now, the
+ tp->pending_follow field of the thread who called fork still contains
+ the details about the fork.
+
+ Then, suppose we run to a fork catchpoint and the user types "detach".
+ In that case, the target should detach the fork child in addition to the
+ parent. In that case as well, the tp->pending_follow field contains
+ the details about the fork.
+
+ To allow targets to differentiate the two cases, clear
+ tp->pending_follow a bit earlier, when following a fork. Targets will
+ then see that tp->pending_follow contains TARGET_WAITKIND_SPURIOUS, and
+ won't detach the fork child.
+
+ As of this patch, no behavior changes are expected.
+
+ Change-Id: I537741859ed712cb531baaefc78bb934e2a28153
+
+2021-12-09 Simon Marchi <simon.marchi@efficios.com>
+
+ gdb/remote.c: refactor pending fork status functions
+ In preparation for a following patch, refactor a few things that I did
+ find a bit awkward, and to make them a bit more reusable.
+
+ - Pass an inferior to kill_new_fork_children instead of a pid. That
+ allows iterating on only this inferior's threads and avoid further
+ filtering on the thread's pid.
+ - Change thread_pending_fork_status to return a non-nullptr value only
+ if the thread does have a pending fork status.
+ - Remove is_pending_fork_parent_thread, as one can just use
+ thread_pending_fork_status and check for nullptr.
+ - Replace is_pending_fork_parent with is_fork_status, which just
+ returns if the given target_waitkind if a fork or a vfork. Push
+ filtering on the pid to the callers, when it is necessary.
+
+ Change-Id: I0764ccc684d40f054e39df6fa5458cc4c5d1cd7b
+
+2021-12-09 Simon Marchi <simon.marchi@efficios.com>
+
+ gdb/remote.c: move some things up
+ Move the stop_reply and a few functions up. Some code above them in the
+ file will need to use them in a following patch. No behavior changes
+ expected here.
+
+ Change-Id: I3ca57d0e3ec253f56e1ba401289d9d167de14ad2
+
+2021-12-09 Simon Marchi <simon.marchi@efficios.com>
+
+ gdb/linux-nat: factor ptrace-detach code to new detach_one_pid function
+ The following patch will add some code paths that need to ptrace-detach
+ a given PID. Factor out the code that does this and put it in its own
+ function, so that it can be re-used.
+
+ Change-Id: Ie65ca0d89893b41aea0a23d9fc6ffbed042a9705
+
+2021-12-09 Simon Marchi <simon.marchi@efficios.com>
+
+ gdbserver: hide fork child threads from GDB
+ This patch aims at fixing a bug where an inferior is unexpectedly
+ created when a fork happens at the same time as another event, and that
+ other event is reported to GDB first (and the fork event stays pending
+ in GDBserver). This happens for example when we step a thread and
+ another thread forks at the same time. The bug looks like (if I
+ reproduce the included test by hand):
+
+ (gdb) show detach-on-fork
+ Whether gdb will detach the child of a fork is on.
+ (gdb) show follow-fork-mode
+ Debugger response to a program call of fork or vfork is "parent".
+ (gdb) si
+ [New inferior 2]
+ Reading /home/simark/build/binutils-gdb/gdb/testsuite/outputs/gdb.threads/step-while-fork-in-other-thread/step-while-fork-in-other-thread from remote target...
+ Reading /home/simark/build/binutils-gdb/gdb/testsuite/outputs/gdb.threads/step-while-fork-in-other-thread/step-while-fork-in-other-thread from remote target...
+ Reading symbols from target:/home/simark/build/binutils-gdb/gdb/testsuite/outputs/gdb.threads/step-while-fork-in-other-thread/step-while-fork-in-other-thread...
+ [New Thread 965190.965190]
+ [Switching to Thread 965190.965190]
+ Remote 'g' packet reply is too long (expected 560 bytes, got 816 bytes): ... <long series of bytes>
+
+ The sequence of events leading to the problem is:
+
+ - We are using the all-stop user-visible mode as well as the
+ synchronous / all-stop variant of the remote protocol
+ - We have two threads, thread A that we single-step and thread B that
+ calls fork at the same time
+ - GDBserver's linux_process_target::wait pulls the "single step
+ complete SIGTRAP" and the "fork" events from the kernel. It
+ arbitrarily choses one event to report, it happens to be the
+ single-step SIGTRAP. The fork stays pending in the thread_info.
+ - GDBserver send that SIGTRAP as a stop reply to GDB
+ - While in stop_all_threads, GDB calls update_thread_list, which ends
+ up querying the remote thread list using qXfer:threads:read.
+ - In the reply, GDBserver includes the fork child created as a result
+ of thread B's fork.
+ - GDB-side, the remote target sees the new PID, calls
+ remote_notice_new_inferior, which ends up unexpectedly creating a new
+ inferior, and things go downhill from there.
+
+ The problem here is that as long as GDB did not process the fork event,
+ it should pretend the fork child does not exist. Ultimately, this event
+ will be reported, we'll go through follow_fork, and that process will be
+ detached.
+
+ The remote target (GDB-side), has some code to remove from the reported
+ thread list the threads that are the result of forks not processed by
+ GDB yet. But that only works for fork events that have made their way
+ to the remote target (GDB-side), but haven't been consumed by the core
+ yet, so are still lingering as pending stop replies in the remote target
+ (see remove_new_fork_children in remote.c). But in our case, the fork
+ event hasn't made its way to the GDB-side remote target. We need to
+ implement the same kind of logic GDBserver-side: if there exists a
+ thread / inferior that is the result of a fork event GDBserver hasn't
+ reported yet, it should exclude that thread / inferior from the reported
+ thread list.
+
+ This was actually discussed a while ago, but not implemented AFAIK:
+
+ https://pi.simark.ca/gdb-patches/1ad9f5a8-d00e-9a26-b0c9-3f4066af5142@redhat.com/#t
+ https://sourceware.org/pipermail/gdb-patches/2016-June/133906.html
+
+ Implementation details-wise, the fix for this is all in GDBserver. The
+ Linux layer of GDBserver already tracks unreported fork parent / child
+ relationships using the lwp_info::fork_relative, in order to avoid
+ wildcard actions resuming fork childs unknown to GDB. This information
+ needs to be made available to the handle_qxfer_threads_worker function,
+ so it can filter the reported threads. Add a new thread_pending_parent
+ target function that allows the Linux target to return the parent of an
+ eventual fork child.
+
+ Testing-wise, the test replicates pretty-much the sequence of events
+ shown above. The setup of the test makes it such that the main thread
+ is about to fork. We stepi the other thread, so that the step completes
+ very quickly, in a single event. Meanwhile, the main thread is resumed,
+ so very likely has time to call fork. This means that the bug may not
+ reproduce every time (if the main thread does not have time to call
+ fork), but it will reproduce more often than not. The test fails
+ without the fix applied on the native-gdbserver and
+ native-extended-gdbserver boards.
+
+ At some point I suspected that which thread called fork and which thread
+ did the step influenced the order in which the events were reported, and
+ therefore the reproducibility of the bug. So I made the test try both
+ combinations: main thread forks while other thread steps, and vice
+ versa. I'm not sure this is still necessary, but I left it there
+ anyway. It doesn't hurt to test a few more combinations.
+
+ Bug: https://sourceware.org/bugzilla/show_bug.cgi?id=28288
+ Change-Id: I2158d5732fc7d7ca06b0eb01f88cf27bf527b990
+
+2021-12-09 GDB Administrator <gdbadmin@sourceware.org>
+
+ Automatic date update in version.in
+
+2021-12-08 Tom Tromey <tom@tromey.com>
+
+ Use for-each more in gdb
+ There are some loops in gdb that use ARRAY_SIZE (or a wordier
+ equivalent) to loop over a static array. This patch changes some of
+ these to use foreach instead.
+
+ Regression tested on x86-64 Fedora 34.
+
+2021-12-08 Tom Tromey <tromey@adacore.com>
+
+ Fix error in file_and_directory patch
+ In my earlier C++-ization patch for file_and_directory, I introduced
+ an error:
+
+ - if (strcmp (fnd.name, "<unknown>") != 0)
+ + if (fnd.is_unknown ())
+
+ This change inverted the sense of the test, which causes failures with
+ .debug_names.
+
+ This patch fixes the bug. Regression tested on x86-64 Fedora 34. I
+ also tested it using the AdaCore internal test suite, with
+ .debug_names -- this was failing before, and now it works.
+
+2021-12-08 Andrew Burgess <aburgess@redhat.com>
+
+ gdb/python: Use tp_init instead of tp_new to setup gdb.Value
+ The documentation suggests that we implement gdb.Value.__init__,
+ however, this is not currently true, we really implement
+ gdb.Value.__new__. This will cause confusion if a user tries to
+ sub-class gdb.Value. They might write:
+
+ class MyVal (gdb.Value):
+ def __init__ (self, val):
+ gdb.Value.__init__(self, val)
+
+ obj = MyVal(123)
+ print ("Got: %s" % obj)
+
+ But, when they source this code they'll see:
+
+ (gdb) source ~/tmp/value-test.py
+ Traceback (most recent call last):
+ File "/home/andrew/tmp/value-test.py", line 7, in <module>
+ obj = MyVal(123)
+ File "/home/andrew/tmp/value-test.py", line 5, in __init__
+ gdb.Value.__init__(self, val)
+ TypeError: object.__init__() takes exactly one argument (the instance to initialize)
+ (gdb)
+
+ The reason for this is that, as we don't implement __init__ for
+ gdb.Value, Python ends up calling object.__init__ instead, which
+ doesn't expect any arguments.
+
+ The Python docs suggest that the reason why we might take this
+ approach is because we want gdb.Value to be immutable:
+
+ https://docs.python.org/3/c-api/typeobj.html#c.PyTypeObject.tp_new
+
+ But I don't see any reason why we should require gdb.Value to be
+ immutable when other types defined in GDB are not. This current
+ immutability can be seen in this code:
+
+ obj = gdb.Value(1234)
+ print("Got: %s" % obj)
+ obj.__init__ (5678)
+ print("Got: %s" % obj)
+
+ Which currently runs without error, but prints:
+
+ Got: 1234
+ Got: 1234
+
+ In this commit I propose that we switch to using __init__ to
+ initialize gdb.Value objects.
+
+ This does introduce some additional complexity, during the __init__
+ call a gdb.Value might already be associated with a gdb value object,
+ in which case we need to cleanly break that association before
+ installing the new gdb value object. However, the cost of doing this
+ is not great, and the benefit - being able to easily sub-class
+ gdb.Value seems worth it.
+
+ After this commit the first example above works without error, while
+ the second example now prints:
+
+ Got: 1234
+ Got: 5678
+
+ In order to make it easier to override the gdb.Value.__init__ method,
+ I have tweaked the definition of gdb.Value.__init__. The second,
+ optional argument to __init__ is a gdb.Type, if this argument is not
+ present then GDB figures out a suitable type.
+
+ However, if we want to override the __init__ method in a sub-class,
+ and still support the default argument, it is easier to write:
+
+ class MyVal (gdb.Value):
+ def __init__ (self, val, type=None):
+ gdb.Value.__init__(self, val, type)
+
+ Currently, passing None for the Type will result in an error:
+
+ TypeError: type argument must be a gdb.Type.
+
+ After this commit I now allow the type argument to be None, in which
+ case GDB figures out a suitable type just as if the type had not been
+ passed at all.
+
+ Unless a user is trying to reinitialize a value, or create sub-classes
+ of gdb.Value, there should be no user visible changes after this
+ commit.
+
+2021-12-08 Andrew Burgess <aburgess@redhat.com>
+
+ gdb: use try/catch around a gdb_disassembler::print_insn call
+ While investigating some disassembler problems I ran into this case;
+ GDB compiled on a 32-bit arm target, with --enable-targets=all. Then
+ in GDB:
+
+ (gdb) set architecture i386
+ (gdb) disassemble 0x0,+4
+ unknown disassembler error (error = -1)
+
+ This is interesting because it shows a case where the libopcodes
+ disassembler is returning -1 without first calling the
+ memory_error_func callback. Indeed, the return from libopcodes
+ happens from this code snippet in i386-dis.c in the print_insn
+ function:
+
+ if (address_mode == mode_64bit && sizeof (bfd_vma) < 8)
+ {
+ (*info->fprintf_func) (info->stream,
+ _("64-bit address is disabled"));
+ return -1;
+ }
+
+ Notice how, prior to the return the disassembler tries to print a
+ helpful message out, but GDB doesn't print this message.
+
+ The reason this message goes missing is the call stack, it looks like
+ this:
+
+ gdb_pretty_print_disassembler::pretty_print_insn
+ gdb_disassembler::print_insn
+ gdbarch_print_insn
+ ...
+ i386-dis.c:print_insn
+
+ When i386-dis.c:print_insn returns -1 this is handled in
+ gdb_disassembler::print_insn, where an exception is thrown. However,
+ the actual printing of the disassembler output is done in
+ gdb_pretty_print_disassembler::pretty_print_insn, and is only done if
+ an exception is not thrown.
+
+ In this commit I change this. The pretty_print_insn now uses
+ try/catch around the call to gdb_disassembler::print_insn, if we catch
+ an error then we first print any pending output in the instruction
+ buffer, before rethrowing the exception. As a result, even if an
+ exception is thrown we still print any pending disassembler output to
+ the screen; in the above case the helpful message will now be shown.
+
+ Before my patch we might expect to see this output:
+
+ (gdb) disassemble 0x0,+4
+ Dump of assembler code from 0x0 to 0x4:
+ 0x0000000000000000: unknown disassembler error (error = -1)
+ (gdb)
+
+ But now we see this:
+
+ (gdb) disassemble 0x0,+4
+ Dump of assembler code from 0x0 to 0x4:
+ 0x0000000000000000: 64-bit address is disabled
+ unknown disassembler error (error = -1)
+
+ If the disassembler returns -1 without printing a helpful message then
+ we would still expect a change in output, something like:
+
+ (gdb) disassemble 0x0,+4
+ Dump of assembler code from 0x0 to 0x4:
+ 0x0000000000000000:
+ unknown disassembler error (error = -1)
+
+ Which I think is still acceptable, though at this point I think a
+ strong case can be made that this is a disassembler bug (not printing
+ anything, but still returning -1).
+
+ Notice however, that the error message is always printed on a new line
+ now. This is also true for the memory error case, where before we
+ might see this:
+
+ (gdb) disassemble 0x0,+4
+ Dump of assembler code from 0x0 to 0x4:
+ 0x00000000: Cannot access memory at address 0x0
+
+ We now get this:
+
+ (gdb) disassemble 0x0,+4
+ Dump of assembler code from 0x0 to 0x4:
+ 0x00000000:
+ Cannot access memory at address 0x0
+
+ For me, I'm happy to accept this change, having the error on a line by
+ itself, rather than just appended to the end of the previous line,
+ seems like an improvement, but I'm aware others might feel
+ differently, so I'd appreciate any feedback.
+
+2021-12-08 Jan Vrany <jan.vrany@labware.com>
+
+ ppc: recognize all program traps
+ Permanent program breakpoints (ones inserted into the code) other than
+ the one GDB uses for POWER (0x7fe00008) did not result in stop but
+ caused GDB to loop infinitely.
+
+ This was because GDB did not recognize trap instructions other than
+ "trap". For example, "tw 12, 4, 4" was not be recognized, causing GDB
+ to loop forever.
+
+ This commit fixes this by providing POWER specific hook
+ (gdbarch_program_breakpoint_here_p) recognizing all tw, twi, td and tdi
+ instructions.
+
+ Tested on Linux on PowerPC e500 and on QEMU PPC64le.
+
+2021-12-08 Jan Vrany <jan.vrany@labware.com>
+
+ ppc: use "trap" ("tw, 31, 0, 0") as breakpoint instruction
+ Power ISA 3.0 B spec [1], sections 3.3.11 "Fixed-Point Trap Instructions"
+ and section C.6 "Trap Mnemonics" specify "tw, 31, 0, 0" (encoded as
+ 0x7fe00008) as canonical unconditional trap instruction.
+
+ This commit changes the breakpoint instruction used by GDB from
+ "tw 12, r2, r2" to unconditional "trap".
+
+ [1]: https://openpowerfoundation.org/?resource_lib=power-isa-version-3-0
+
+2021-12-08 Fangrui Song <maskray@google.com>
+
+ bfd_section_from_shdr: Support SHT_RELR sections
+ If a.so contains an SHT_RELR section, objcopy a.so will fail with:
+
+ a.so: unknown type [0x13] section `.relr.dyn'
+
+ This change allows objcopy to work.
+
+ bfd/
+ * elf.c (bfd_section_from_shdr): Support SHT_RELR.
+
+2021-12-08 Alan Modra <amodra@gmail.com>
+
+ PR28673, input file 'gcov' is the same as output file
+ PR 28673
+ * ldlang.c (open_output): Use local_sym_name when checking
+ output against input files rather than filename.
+
+2021-12-08 Tom Tromey <tom@tromey.com>
+
+ Fix bug in source.c change
+ My earlier change to source.c ("Remove an xfree from add_path")
+ introduced a regression. This patch fixes the problem.
+
+2021-12-08 Simon Marchi <simon.marchi@polymtl.ca>
+
+ gdb: make struct linespect contain vectors, not pointers to vectors
+ struct linespec contains pointers to vectors, instead of containing
+ vectors directly. This is probably historical, when linespec_parser
+ (which contains a struct linespec field) was not C++-ified yet. But it
+ seems easy to change the pointers to vectors to just vectors today.
+ This simplifies the code, we don't need to manually allocate and delete
+ the vectors and there's no pointer that can be NULL.
+
+ As far as I understand, there was not meaningful distinction between a
+ NULL pointer to vector and an empty vector. So all NULL checks are
+ changed for !empty checks.
+
+ Change-Id: Ie759707da14d9d984169b93233343a86e2de9ee6
+
+2021-12-08 GDB Administrator <gdbadmin@sourceware.org>
+
+ Automatic date update in version.in
+
+2021-12-07 Tom Tromey <tom@tromey.com>
+
+ Remove an xfree from add_path
+ This removes a temporary \0 assignment and an xfree from add_path,
+ replacing it with a simpler use of std::string.
+
+2021-12-07 Simon Marchi <simon.marchi@polymtl.ca>
+
+ gdb/linespec.c: simplify condition
+ We can remove the empty check: if the vector has size 1, it is obviously
+ not empty. This code ended up like this because the empty check used to
+ be a NULL check.
+
+ Change-Id: I1571bd0228818ca93f6a6b444e9b010dc2da4c08
+
+2021-12-07 Simon Marchi <simon.marchi@polymtl.ca>
+
+ gdb: rename "maint agent" functions
+ Functions agent_eval_command and agent_command are used to implement
+ maintenance commands, rename them accordingly (with the maint_ prefix),
+ as well as the agent_command_1 helper function.
+
+ Change-Id: Iacf96d4a0a26298e8dd4648a0f38da649ea5ef61
+
+2021-12-07 Simon Marchi <simon.marchi@polymtl.ca>
+
+ gdb: make set_raw_breakpoint static
+ set_raw_breakpoint is only used in breakpoint.c, make it static.
+
+ Change-Id: I7fbeda067685309a30b88aceaf957eff7a28e310
+
+2021-12-07 John Baldwin <jhb@FreeBSD.org>
+
+ Support AT_FXRNG and AT_KPRELOAD on FreeBSD.
+ FreeBSD's kernel has recently added two new ELF auxiliary vector
+ entries. AT_FXRNG points to a root seed version for the kernel's
+ PRNG. Userland can use this to reseed a userland PRNG after the
+ kernel's PRNG has reseeded. AT_KPRELOAD is the base address of a
+ kernel-provided vDSO.
+
+ This change displays the proper name and description of these entries
+ in 'info auxv'.
+
+ include/ChangeLog:
+
+ * elf/common.h (AT_FREEBSD_FXRNG, AT_FREEBSD_KPRELOAD): Define.
+
+2021-12-07 Tom Tromey <tromey@adacore.com>
+
+ Avoid extra work in global_symbol_searcher::expand_symtabs
+ I noticed that global_symbol_searcher::expand_symtabs always passes a
+ file matcher to expand_symtabs_matching. However, if 'filenames' is
+ empty, then this always returns true. It's slightly more efficient to
+ pass a null file matcher in this case, because that lets the "quick"
+ symbol implementations skip any filename checks.
+
+ Regression tested on x86-64 Fedora 34.
+
+2021-12-07 Tom de Vries <tdevries@suse.de>
+
+ [gdb/testsuite] Fix options arg handling in compile_jit_elf_main_as_so
+ In commit 80ad340c902 ("[gdb/testsuite] use -Ttext-segment for jit-elf tests")
+ the following change was made:
+ ...
+ proc compile_jit_elf_main_as_so {main_solib_srcfile main_solib_binfile options} {
+ - set options [concat $options debug]
+ + global jit_load_address jit_load_increment
+ +
+ + set options [list \
+ + additional_flags="-DMAIN=jit_dl_main" \
+ + additional_flags=-DLOAD_ADDRESS=$jit_load_address \
+ + additional_flags=-DLOAD_INCREMENT=$jit_load_increment \
+ + debug]
+ ...
+
+ Before the change, the options argument was used, but after the change not
+ anymore.
+
+ Fix this by reverting back to using "set options [concat $options ...]".
+
+ Fixing this gets us twice the -DMAIN=jit_dl_main bit, once from a caller, and
+ once from compile_jit_elf_main_as_so. Fix this by removing the bit from
+ compile_jit_elf_main_as_so, which makes the code similar to compile_jit_main.
+
+ Tested on x86_64-linux.
+
+2021-12-07 Tom de Vries <tdevries@suse.de>
+
+ [gdb/testsuite] Fix FAIL in gdb.tui/basic.exp
+ On openSUSE Leap 15.2 aarch64 I ran into:
+ ...
+ FAIL: gdb.tui/basic.exp: check main is where we expect on the screen
+ ...
+ while this is passing on x86_64.
+
+ On x86_64-linux we have at the initial screen dump for "list -q main":
+ ...
+ 0 +-/home/vries/gdb_versions/devel/src/gdb/testsuite/gdb.tui/tui-layout.c--+
+ 1 | 15 You should have received a copy of the GNU General Public |
+ 2 | 16 along with this program. If not, see <http://www.gnu.org/|
+ 3 | 17 |
+ 4 | 18 int |
+ 5 | 19 main () |
+ 6 | 20 { |
+ 7 | 21 return 0; |
+ 8 | 22 } |
+ 9 | 23 |
+ ...
+ but on aarch64:
+ ...
+ 0 +-/home/tdevries/gdb/src/gdb/testsuite/gdb.tui/tui-layout.c--------------+
+ 1 | 16 along with this program. If not, see <http://www.gnu.org/|
+ 2 | 17 |
+ 3 | 18 int |
+ 4 | 19 main () |
+ 5 | 20 { |
+ 6 | 21 return 0; |
+ 7 | 22 } |
+ 8 | 23 |
+ 9 | 24 |
+ ...
+
+ The cause of the diffferent placement is that we have as line number for main
+ on x86_64:
+ ...
+ $ gdb -q -batch outputs/gdb.tui/basic/basic -ex "info line main"
+ Line 20 of "tui-layout.c" starts at address 0x4004a7 <main> \
+ and ends at 0x4004ab <main+4>.
+ ...
+ and on aarch64 instead:
+ ...
+ $ gdb -q -batch outputs/gdb.tui/basic/basic -ex "info line main"
+ Line 21 of "tui-layout.c" starts at address 0x4005f4 <main> \
+ and ends at 0x4005f8 <main+4>.
+ ...
+
+ Fix this by using a new source file main-one-line.c, that implements the
+ entire main function on a single line, in order to force the compiler to use
+ that line number.
+
+ Also try to do less hard-coding in the test-case.
+
+ Tested on x86_64-linux and aarch64-linux.
+
+2021-12-07 Tom de Vries <tdevries@suse.de>
+
+ [gdb/tdep] Fix inferior plt calls in PIE for i386
+ Consider test-case test.c:
+ ...
+ int main (void) {
+ void *p = malloc (10);
+ return 0;
+ }
+ ...
+
+ When compiled to a non-PIE exec:
+ ...
+ $ gcc -m32 test.c
+ ...
+ the call sequence looks like:
+ ...
+ 8048447: 83 ec 0c sub $0xc,%esp
+ 804844a: 6a 0a push $0xa
+ 804844c: e8 bf fe ff ff call 8048310 <malloc@plt>
+ ...
+ which calls to:
+ ...
+ 08048310 <malloc@plt>:
+ 8048310: ff 25 0c a0 04 08 jmp *0x804a00c
+ 8048316: 68 00 00 00 00 push $0x0
+ 804831b: e9 e0 ff ff ff jmp 8048300 <.plt>
+ ...
+ where the first insn at 0x8048310 initially jumps to the following address
+ 0x8048316, read from the .got.plt @ 0x804a00c:
+ ...
+ 804a000 0c9f0408 00000000 00000000 16830408 ................
+ 804a010 26830408 &...
+ ...
+
+ Likewise, when compiled as a PIE:
+ ...
+ $ gcc -m32 -fPIE -pie test.c
+ ...
+ we have this call sequence (with %ebx setup to point to the .got.plt):
+ ...
+ 0000055d <main>:
+ 579: 83 ec 0c sub $0xc,%esp
+ 57c: 6a 0a push $0xa
+ 57e: 89 c3 mov %eax,%ebx
+ 580: e8 6b fe ff ff call 3f0 <malloc@plt>
+ ...
+ which calls to:
+ ...
+ 000003f0 <malloc@plt>:
+ 3f0: ff a3 0c 00 00 00 jmp *0xc(%ebx)
+ 3f6: 68 00 00 00 00 push $0x0
+ 3fb: e9 e0 ff ff ff jmp 3e0 <.plt>
+ ...
+ where the insn at 0x3f0 initially jumps to following address 0x3f6, read from
+ the .got.plt at offset 0xc:
+ ...
+ 2000 f41e0000 00000000 00000000 f6030000 ................
+ 2010 06040000 ....
+ ...
+
+ When instead doing an inferior call to malloc (with nosharedlib to force
+ malloc to resolve to malloc@plt rather than the functions in ld.so or libc.so)
+ with the non-PIE exec, we have the expected:
+ ...
+ $ gdb -q -batch a.out -ex start -ex nosharedlib -ex "p /x (void *)malloc (10)"
+ Temporary breakpoint 1 at 0x8048444
+
+ Temporary breakpoint 1, 0x08048444 in main ()
+ $1 = 0x804b160
+ ...
+
+ But with the PIE exec, we run into:
+ ...
+ $ gdb -q -batch a.out -ex start -ex nosharedlib -ex "p /x (void *)malloc (10)"
+ Temporary breakpoint 1 at 0x56c
+
+ Temporary breakpoint 1, 0x5655556c in main ()
+
+ Program received signal SIGSEGV, Segmentation fault.
+ 0x565553f0 in malloc@plt ()
+ ...
+
+ The segfault happens because:
+ - the inferior call mechanism doesn't setup %ebx
+ - %ebx instead is 0
+ - the jump to "*0xc(%ebx)" reads from memory at 0xc
+
+ Fix this by setting up %ebx properly in i386_thiscall_push_dummy_call.
+
+ Fixes this failure with target board unix/-m32/-pie/-fPIE reported in
+ PR28467:
+ ...
+ FAIL: gdb.base/nodebug.exp: p/c (int) array_index("abcdef",2)
+ ...
+
+ Tested on x86_64-linux, with target board unix/-m32 and unix/-m32/-fPIE/-pie.
+
+ Bug: https://sourceware.org/bugzilla/show_bug.cgi?id=28467
+
+2021-12-07 Tom de Vries <tdevries@suse.de>
+
+ [gdb/symtab] Support -readnow during reread
+ When running test-case gdb.base/cached-source-file.exp with target board
+ readnow, we run into:
+ ...
+ FAIL: gdb.base/cached-source-file.exp: rerun program (the program exited)
+ ...
+
+ The problem is that when rereading, the readnow is ignored.
+
+ Fix this by copying the readnow handling code from symbol_file_add_with_addrs
+ to reread_symbols.
+
+ Tested on x86_64-linux.
+
+ Bug: https://sourceware.org/bugzilla/show_bug.cgi?id=26800
+
+2021-12-07 Tom de Vries <tdevries@suse.de>
+
+ [gdb/ada] Fix assert in ada_is_unconstrained_packed_array_type
+ On openSUSE Leap 42.3, with system compiler gcc 4.8.5 I run into:
+ ...
+ (gdb) print u_one_two_three^M
+ src/gdb/gdbtypes.h:1050: internal-error: field: \
+ Assertion `idx >= 0 && idx < num_fields ()' failed.^M
+ ...
+
+ We run into trouble while doing this in
+ ada_is_unconstrained_packed_array_type:
+ ...
+ 1953 return TYPE_FIELD_BITSIZE (type, 0) > 0;
+ ...
+ which tries to get field 0 from a type without fields:
+ ...
+ (gdb) p type->num_fields ()
+ $6 = 0
+ ...
+ which is the case because the type is a typedef:
+ ...
+ (gdb) p type->code ()
+ $7 = TYPE_CODE_TYPEDEF
+ ...
+
+ Fix this by using the type referenced by the typedef instead.
+
+ Tested on x86_64-linux.
+
+ Bug: https://sourceware.org/bugzilla/show_bug.cgi?id=28323
+
+2021-12-07 Alan Modra <amodra@gmail.com>
+
+ Re: Add support for AArch64 EFI (efi-*-aarch64)
+ Commit b69c9d41e8 was broken in multiple ways regarding the realloc
+ of the target string, most notably in that "-little" wasn't actually
+ appended to the input_target or output_target. This caused asan
+ errors and "FAIL: Check if efi app format is recognized". I also
+ noticed that the input_target string wasn't being copied but rather
+ the output_target when dealing with the input target. Fix that too.
+
+ PR 26206
+ * objcopy.c (convert_efi_target): Rewrite. Allocate modified
+ target strings here..
+ (copy_main): ..rather than here. Do handle input_target,
+ not output_target for input.
+
+2021-12-07 Alan Modra <amodra@gmail.com>
+
+ Error on ld output file name matching input file name
+ It's not foolproof, for example we don't catch output to a linker
+ script, to a library specified with -l, or to an element of a thin
+ archive.
+
+ * ldlang.c (open_output): Exit with error on output file matching
+ an input file.
+ * testsuite/ld-misc/just-symbols.exp: Adjust ld -r test to suit.
+
+2021-12-07 GDB Administrator <gdbadmin@sourceware.org>
+
+ Automatic date update in version.in
+
+2021-12-06 Carl Love <cel@us.ibm.com>
+
+ gdb: Add PowerPC support to gdb.dwarf2/frame-inlined-in-outer-frame
+ This patch adds an #elif defined for PowerPC to setup the exit_0 macro.
+ This patch addes the needed macro definitionald logic to handle both elfV1
+ and elfV2.
+
+ The patch has been successfully tested on both PowerPC BE, Powerpc LE and
+ X86_64 with no regressions.
+
+2021-12-06 Tom de Vries <tdevries@suse.de>
+
+ [gdb/testsuite] Use precise align in gdb.arch/i386-{avx,sse}.exp
+ Test-cases gdb.arch/i386-{avx,sse}.exp use assembly instructions that require
+ the memory operands to be aligned to a certain boundary, and the test-cases
+ use C11's _Alignas to make that happen.
+
+ The draw-back of using _Alignas is that while it does enforce a minimum
+ alignment, the actual alignment may be bigger, which makes the following
+ scenario possible:
+ - copy say, gdb.arch/i386-avx.c as basis for a new test-case
+ - run the test-case and observe a PASS
+ - commit the new test-case in the supposition that the test-case is correct
+ and well-tested
+ - run later into a failure on a different test setup (which may be a setup
+ where reproduction and investigation is more difficult and time-consuming),
+ and find out that the specified alignment was incorrect and should have been
+ updated to say, 64 bytes. The initial PASS occurred only because the actual
+ alignment happened to be greater than required.
+
+ The idea of having precise alignment as a means of having more predictable
+ execution which allows flushing out bugs earlier, has been filed as PR
+ gcc/103095.
+
+ Add a new file lib/precise-aligned-alloc.c with functions
+ precise_aligned_alloc and precise_aligned_dup, to support precise alignment.
+
+ Use precise_aligned_dup in aforementioned test-cases to:
+ - verify that the specified alignment is indeed sufficient, rather
+ than too little but accidentally over-aligned.
+ - prevent the same type of problems in any new test-cases based on these
+
+ Tested on x86_64-linux, with both gcc and clang.
+
+2021-12-06 Tom de Vries <tdevries@suse.de>
+
+ [gdb/testsuite] Fix data alignment in gdb.arch/i386-{avx,sse}.exp
+ When running test-case gdb.arch/i386-avx.exp with clang I ran into:
+ ...
+ (gdb) PASS: gdb.arch/i386-avx.exp: set first breakpoint in main
+ continue^M
+ Continuing.^M
+ ^M
+ Program received signal SIGSEGV, Segmentation fault.^M
+ 0x000000000040052b in main (argc=1, argv=0x7fffffffd3c8) at i386-avx.c:54^M
+ 54 asm ("vmovaps 0(%0), %%ymm0\n\t"^M
+ (gdb) FAIL: gdb.arch/i386-avx.exp: continue to breakpoint: \
+ continue to first breakpoint in main
+ ...
+
+ The problem is that the vmovaps insn requires an 256-bit (or 32-byte) aligned
+ address, and it's only 16-byte aligned:
+ ...
+ (gdb) p /x $rax
+ $1 = 0x601030
+ ...
+
+ Fix this by using a sufficiently aligned address, using _Alignas.
+
+ Compile using -std=gnu11 to support _Alignas.
+
+ Likewise in gdb.arch/i386-sse.exp.
+
+ Tested on x86_64-linux, with both gcc and clang.
+
+2021-12-06 Alan Modra <amodra@gmail.com>
+
+ [GOLD] PowerPC64 inline plt sequences
+ The fixes gold failures to handle inline PLT sequences properly.
+ PowerPC gold was always turning these back into direct calls due to
+ gsym->use_plt_offset() returning false. This is fixed for dynamic
+ linking by correcting get_reference_flags, and for static linking by
+ overriding use_plt_offset() in relocate(). The rest of the patch
+ revolves around needing to create PLT entries for inline PLT calls
+ when statically linking (for gcc -mlongcall). The lplt section
+ handled that for local symbols, now it does globals too.
+
+ * powerpc.cc (Target_powerpc::plt_off): Return proper section
+ for static link.
+ (Target_powerpc::symval_for_branch): Make public.
+ (Target_powerpc::make_lplt_section): Add Symbol_table* param.
+ Adjust all calls.
+ (Target_powerpc::make_local_plt_entry): Likewise.
+ (Target_powerpc::make_local_plt_entry): New variant for global syms.
+ (Powerpc_relobj::do_relocate_sections): Don't write lplt contents.
+ (Output_data_plt_powerpc::do_write): Write lplt contents here.
+ (Output_data_plt_powerpc::Output_data_plt_powerpc): Save
+ symbol table pointer. Adjust all uses.
+ (Output_data_plt_powerpc::add_entry): Add stash parameter. Don't
+ do dynamic reloc handling when no reloc section. Save symbol
+ for local plt entries.
+ (Output_data_plt_powerpc::add_local_entry): Save symbol.
+ (Output_data_plt_powerpc::Local_plt_ent): New class.
+ (Output_data_plt_powerpc::sym_ents_): New vector.
+ (Target_powerpc::Scan::get_reference_flags): Return
+ FUNCTION_CALL|RELATIVE_REF for inline plt relocs.
+ (Target_powerpc::Scan::global): Make entries in lplt for inline
+ plt call relocation symbols.
+ (Target_powerpc::Relocate::relocate): Rename has_plt_offset to
+ use_plt_offset. Set use_plt_offset for inline plt relocs.
+
+2021-12-06 Clément Chigot <clement.chigot@atos.net>
+
+ ld: improve shared tests for AIX
+ It's now possible to refer symbols in the main program from the
+ shared library. However, it still impossible to have the same
+ overriden features between shared objects and mains than ELF,
+ without using the runtime linking feature which isn't yet fully
+ available.
+
+ ld/ChangeLog:
+
+ * testsuite/ld-shared/shared.exp: Improve XCOFF support
+ * testsuite/ld-shared/main.c: Likewise.
+ * testsuite/ld-shared/sh1.c: Likewise.
+ * testsuite/ld-shared/xcoff.dat: Likewise.
+
+2021-12-06 GDB Administrator <gdbadmin@sourceware.org>
+
+ Automatic date update in version.in
+
+2021-12-05 Tom Tromey <tom@tromey.com>
+
+ Preserve artificial CU name in process_psymtab_comp_unit_reader
+ This fixes a use-after-free that Simon pointed out.
+ process_psymtab_comp_unit_reader was allocating an artificial name for
+ a CU, and then discarding it. However, this name was preserved in the
+ cached file_and_directory. This patch arranges for the allocated name
+ to be preserved there.
+
+2021-12-05 Mike Frysinger <vapier@gentoo.org>
+
+ sim: include ansidecl.h when needed
+ Avoid implicit include deps with this to help untangle sim headers
+ so we can get rid of arch-specific sim-main.h.
+
+ sim: include stdint.h when needed
+ Avoid implicit include deps with this to help untangle sim headers
+ so we can get rid of arch-specific sim-main.h.
+
+ sim: include stdarg.h when used
+ Avoid implicit include deps with this to help untangle sim headers
+ so we can get rid of arch-specific sim-main.h.
+
+2021-12-05 Mike Frysinger <vapier@gentoo.org>
+
+ sim: reorder header includes
+ We're including system headers after local headers in a bunch of
+ places, but this leads to conflicts when our local headers happen
+ to define symbols that show up in the system headers.
+
+ Use the more standard order of:
+ * config.h (via defs.h)
+ * system headers
+ * local library headers (e.g. bfd & libiberty)
+ * sim specific headers
+
+2021-12-05 Simon Marchi <simon.marchi@polymtl.ca>
+
+ gdbsupport: fix memory leak in create_file_handler when re-using file handler
+ ASan made me notice a memory leak, where the memory tied to the file
+ handle name string wasn't freed. When register a file handler with an
+ fd that is already registered, we re-use the file_handler object, so we
+ ended up creating a new std::string object and overwriting the
+ file_handler::name pointer, without free-ing the old std::string.
+
+ Fix this by allocating file_handler with new, deleting it with
+ delete, and making file_handler::name not a pointer.
+
+ Change-Id: Ie304cc78ab5ae5dfad9a1366e9890c09de651f43
+
+2021-12-05 GDB Administrator <gdbadmin@sourceware.org>
+
+ Automatic date update in version.in
+
+2021-12-04 Mike Frysinger <vapier@gentoo.org>
+
+ sim: moxie: hoist dtb rules up to common builds
+ These rules don't depend on the target compiler settings, so hoist
+ the build logic up to the common builds for better parallelization.
+
+ sim: m68hc11: delete unused profile flags
+ These were moved to the common configure script a while ago and have
+ the same default as these, so just delete it.
+
+ sim: msp430: delete redundant comments & settings
+ These were copied from the example docs, so aren't adding any value.
+
+ sim: erc32: drop old configure target
+ There is no configure script in here anymore to regenerate.
+
+ sim: m32c/rl78: drop redundant -Wall settings
+ We already turn these on in the configure script.
+
+2021-12-04 Tom Tromey <tom@tromey.com>
+
+ Cache the result of find_file_and_directory
+ This changes the DWARF reader to cache the result of
+ find_file_and_directory. This is not especially important now, but it
+ will help the new DWARF indexer.
+
+ Move file_and_directory to new file and C++-ize
+ This moves file_and_directory to a new file, and then C++-izes it --
+ replacing direct assignments with methods, and arranging for it to own
+ any string that must be computed. Finally, the CU's objfile will only
+ be used on demand; this is an important property for the new DWARF
+ indexer's parallel mode.
+
+ Remove Irix case from find_file_and_directory
+ find_file_and_directory has a special case for the Irix 6.2 compiler.
+ Since this is long obsolete, this patch removes it.
+
+2021-12-04 Mike Frysinger <vapier@gentoo.org>
+
+ sim: frv: split up testsuite a bit
+ Running frv's allinsn in serial is quite slow due to the sheer number
+ of tests it contains. By splitting it up and running in parallel, the
+ execution time on my system goes from ~100sec to ~60sec.
+
+2021-12-04 Simon Marchi <simon.marchi@polymtl.ca>
+
+ gdb: don't show deprecated aliases
+ I don't think it's very useful to show deprecated aliases to the
+ user. It encourages the user to use them, when the goal is the
+ opposite.
+
+ For example, before:
+
+ (gdb) help set index-cache enabled
+ set index-cache enabled, set index-cache off, set index-cache on
+ alias set index-cache off = set index-cache enabled off
+ alias set index-cache on = set index-cache enabled on
+ Enable the index cache.
+ When on, enable the use of the index cache.
+
+ (gdb) help set index-cache on
+ Warning: 'set index-cache on', an alias for the command 'set index-cache enabled', is deprecated.
+ Use 'set index-cache enabled on'.
+
+ set index-cache enabled, set index-cache off, set index-cache on
+ alias set index-cache off = set index-cache enabled off
+ alias set index-cache on = set index-cache enabled on
+ Enable the index cache.
+ When on, enable the use of the index cache.
+
+ After:
+
+ (gdb) help set index-cache enabled
+ Enable the index cache.
+ When on, enable the use of the index cache.
+ (gdb) help set index-cache on
+ Warning: 'set index-cache on', an alias for the command 'set index-cache enabled', is deprecated.
+ Use 'set index-cache enabled on'.
+
+ Enable the index cache.
+ When on, enable the use of the index cache.
+
+ Change-Id: I989b618a5ad96ba975367e9d16db95523cd57a4c
+
+2021-12-04 Simon Marchi <simon.marchi@polymtl.ca>
+
+ gdb/testsuite: fix two "maint info line-table"-related tests
+ Commit 92228a334ba2 ("gdb: small "maintenance info line-table"
+ readability improvements") change the output format of "maint info
+ line-table" slightly, adding some empty lines between each
+ line-table. This causes two tests to start failing, update them to
+ account for those empty lines.
+
+ Change-Id: I9d33a58fce3e860ba0554b25f5582e8066a5c519
+
+2021-12-04 Simon Marchi <simon.marchi@efficios.com>
+
+ gdb: revert one array_view copy change in ada-lang.c
+ Commit 4bce7cdaf481 ("gdbsupport: add array_view copy function") caused
+ an internal error when running gdb.ada/packed_array_assign.exp:
+
+ print pra(1) := pr^M
+ /home/smarchi/src/binutils-gdb/gdb/../gdbsupport/array-view.h:217: internal-error: copy: Assertion `dest.size () == src.size ()' failed.^M
+
+ I am not sure what's the root cause of this, whether it is a GDB bug
+ exposed by using the array_view copy function or not. Back out the
+ change that triggers the internal error for now, while we investigate
+ it.
+
+ Change-Id: I055ab14143e4cfd3ca7ce8f4855c6c3c05db52a7
+
+2021-12-04 Mike Frysinger <vapier@gentoo.org>
+
+ bfd: unify header generation rules
+ The logic between these rules are extremely similar, so unify them
+ into a single variable.
+
+2021-12-04 Mike Frysinger <vapier@gentoo.org>
+
+ bfd: move header updates up a directory
+ The rules for rebuilding the bfd headers live in the doc/ subdir
+ (most likely) because they rely on the chew & related tools. But
+ we can collapse them into the main Makefile while keeping the tools
+ in the doc subdir easily enough. This makes the code simpler and
+ allows for rebuilding them in parallel.
+
+ Also add automake silent rule support while we're here.
+
+2021-12-04 Mike Frysinger <vapier@gentoo.org>
+
+ bfd: convert bfdver.h to silent automake rules
+
+2021-12-04 GDB Administrator <gdbadmin@sourceware.org>
+
+ Automatic date update in version.in
+
+2021-12-03 Simon Marchi <simon.marchi@polymtl.ca>
+
+ gdb: small "maintenance info line-table" readability improvements
+ - separate each entry with a newline, to visually separate them
+ - style filenames with the filename style
+ - print the name of the compunit_symtab
+
+ A header now looks like this, with the compunit_symtab name added (and
+ the coloring, but you can't really see it here):
+
+ objfile: /home/simark/build/babeltrace/src/cli/.libs/babeltrace2 ((struct objfile *) 0x613000005980)
+ compunit_symtab: babeltrace2-cfg-cli-args.c ((struct compunit_symtab *) 0x62100da1ed10)
+ symtab: /usr/include/glib-2.0/glib/gdatetime.h ((struct symtab *) 0x62100d9ee530)
+ linetable: ((struct linetable *) 0x0):
+
+ Change-Id: Idc23e10aaa66e2e692adb0a6a74144f72c4fa1c7
+
+2021-12-03 Simon Marchi <simon.marchi@polymtl.ca>
+
+ gdb: change some alias functions parameters to const-reference
+ Now that we use intrusive list to link aliases, it becomes easier to
+ pass cmd_list_element arguments by const-reference rather than by
+ pointer to some functions, change a few.
+
+ Change-Id: Id0df648ed26e9447da0671fc2c858981cda31df8
+
+2021-12-03 Simon Marchi <simon.marchi@polymtl.ca>
+
+ gdb: use intrusive_list for cmd_list_element aliases list
+ Change the manually-implemented linked list to use intrusive_list. This
+ is not strictly necessary, but it makes the code much simpler.
+
+ Change-Id: Idd08090ebf2db8bdcf68e85ef72a9635f1584ccc
+
+2021-12-03 Simon Marchi <simon.marchi@polymtl.ca>
+
+ gdb: trivial changes to use array_view
+ Change a few relatively obvious spots using value contents to propagate
+ the use array_view a bit more.
+
+ Change-Id: I5338a60986f06d5969fec803d04f8423c9288a15
+
+2021-12-03 Simon Marchi <simon.marchi@polymtl.ca>
+
+ gdb: make extract_integer take an array_view
+ I think it would make sense for extract_integer, extract_signed_integer
+ and extract_unsigned_integer to take an array_view. This way, when we
+ extract an integer, we can validate that we don't overflow the buffer
+ passed by the caller (e.g. ask to extract a 4-byte integer but pass a
+ 2-byte buffer).
+
+ - Change extract_integer to take an array_view
+ - Add overloads of extract_signed_integer and extract_unsigned_integer
+ that take array_views. Keep the existing versions so we don't
+ need to change all callers, but make them call the array_view
+ versions.
+
+ This shortens some places like:
+
+ result = extract_unsigned_integer (value_contents (result_val).data (),
+ TYPE_LENGTH (value_type (result_val)),
+ byte_order);
+
+ into
+
+ result = extract_unsigned_integer (value_contents (result_val), byte_order);
+
+ value_contents returns an array view that is of length
+ `TYPE_LENGTH (value_type (result_val))` already, so the length is
+ implicitly communicated through the array view.
+
+ Change-Id: Ic1c1f98c88d5c17a8486393af316f982604d6c95
+
+2021-12-03 Simon Marchi <simon.marchi@polymtl.ca>
+
+ gdbsupport: add array_view copy function
+ An assertion was recently added to array_view::operator[] to ensure we
+ don't do out of bounds accesses. However, when the array_view is copied
+ to or from using memcpy, it bypasses that safety.
+
+ To address this, add a `copy` free function that copies data from an
+ array view to another, ensuring that the destination and source array
+ views have the same size. When copying to or from parts of an
+ array_view, we are expected to use gdb::array_view::slice, which does
+ its own bounds check. With all that, any copy operation that goes out
+ of bounds should be caught by an assertion at runtime.
+
+ copy is implemented using std::copy and std::copy_backward, which, at
+ least on libstdc++, appears to pick memmove when copying trivial data.
+ So in the end there shouldn't be much difference vs using a bare memcpy,
+ as we do right now. When copying non-trivial data, std::copy and
+ std::copy_backward assigns each element in a loop.
+
+ To properly support overlapping ranges, we must use std::copy or
+ std::copy_backward, depending on whether the destination is before the
+ source or vice-versa. std::copy and std::copy_backward don't support
+ copying exactly overlapping ranges (where the source range is equal to
+ the destination range). But in this case, no copy is needed anyway, so
+ we do nothing.
+
+ The order of parameters of the new copy function is based on std::copy
+ and std::copy_backward, where the source comes before the destination.
+
+ Change a few randomly selected spots to use the new function, to show
+ how it can be used.
+
+ Add a test for the new function, testing both with arrays of a trivial
+ type (int) and of a non-trivial type (foo). Test non-overlapping
+ ranges as well as three kinds of overlapping ranges: source before dest,
+ dest before source, and dest == source.
+
+ Change-Id: Ibeaca04e0028410fd44ce82f72e60058d6230a03
+
+2021-12-03 Simon Marchi <simon.marchi@efficios.com>
+
+ gdb: change store_waitstatus to return a target_waitstatus by value
+ store_waitstatus is basically a translation function between a status
+ integer and an equivalent target_waitstatus object. It would make sense
+ for it to take the integer as a parameter and return the
+ target_waitstatus by value. Do that, and rename to
+ host_status_to_waitstatus. Users can then do:
+
+ ws = host_status_to_waitstatus (status)
+
+ which does the right thing, given the move constructor of
+ target_waitstatus.
+
+ Change-Id: I7a07d59d3dc19d3ed66929642f82f44f3e85d61b
+
+2021-12-03 Simon Marchi <simon.marchi@efficios.com>
+
+ gdb: return *this in target_waitstatus setters
+ While playing with some code creating target_waitstatus objects, I was
+ mildly annoyed by the fact that we can't just return a new
+ target_waitstatus object. We have to do:
+
+ target_waitstatus ws;
+ ws.set_exited (123);
+ return ws;
+
+ Make the setters return the "this" object as a reference, such that it's
+ possible to do:
+
+ return target_waitstatus ().set_exited (123);
+
+ I initially thought of adding static creation functions, which you would
+ use like:
+
+ return target_waitstatus::make_exited (123);
+
+ However, making the setters return a reference to the object achieves
+ pretty much the same thing, with less new code.
+
+ Change-Id: I45159b7f9fcd9db5b20603480e323020b14ed147
+
+2021-12-03 Simon Marchi <simon.marchi@polymtl.ca>
+
+ gdb: make saved_filename an std::string
+ Make this variable an std::string, avoiding manual memory management.
+
+ Change-Id: Ie7a8d7381449ab9c4dfc4cb8b99e63b9ffa8f947
+
+2021-12-03 Richard Sandiford <richard.sandiford@arm.com>
+
+ aarch64: Fix uninitialised memory
+ AARCH64_OPDE_EXPECTED_A_AFTER_B and AARCH64_OPDE_A_SHOULD_FOLLOW_B
+ are not paired with an error string, but we had an assert that the
+ error was nonnull. Previously this assert was testing uninitialised
+ memory and so could pass or fail arbitrarily.
+
+ opcodes/
+ * aarch64-opc.c (verify_mops_pme_sequence): Initialize the error
+ field to null for AARCH64_OPDE_EXPECTED_A_AFTER_B and
+ AARCH64_OPDE_A_SHOULD_FOLLOW_B.
+ * aarch64-dis.c (print_verifier_notes): Move assert.
+
+2021-12-03 Andrew Burgess <andrew.burgess@embecosm.com>
+
+ gdb: make value_subscripted_rvalue static
+ The function value_subscripted_rvalue is only used in valarith.c, so
+ lets make it a static function.
+
+ There should be no user visible change after this commit.
+
+2021-12-03 Andrew Burgess <aburgess@redhat.com>
+
+ gdb/testsuite: give a test a real name
+ A test in gdb.python/py-send-packet.exp added in this commit:
+
+ commit 24b2de7b776f8f23788d855b1eec290c6e208821
+ Date: Tue Aug 31 14:04:36 2021 +0100
+
+ gdb/python: add gdb.RemoteTargetConnection.send_packet
+
+ included a large amount of binary data in the command sent to GDB. As
+ this test didn't have a real test name the binary data was included in
+ the gdb.sum file. The contents of the binary data could change
+ between different runs of GDB, and this makes comparing results
+ harder.
+
+ This commit gives the test a real test name.
+
+2021-12-03 Andrew Burgess <aburgess@redhat.com>
+
+ gdb/remote: fix use after free bug
+ This commit:
+
+ commit 288712bbaca36bff6578bc839ebcdc3707662f81
+ Date: Mon Nov 22 15:16:27 2021 +0000
+
+ gdb/remote: use scoped_restore to control starting_up flag
+
+ introduced a use after free bug. The scoped restore added in the
+ above commit resets a flag within a remote_target's remote_state
+ object.
+
+ However, in some situations, the remote_target can be unpushed before
+ the error is thrown. If the only reference to the target is the one
+ in the target stack, then unpushing the target will cause the
+ remote_target to be deleted, which, in turn, will delete the
+ remote_state object. The scoped restore will then try to reset the
+ flag within a deleted object.
+
+ This problem was caught in the gdb.server/server-connect.exp test,
+ which, when run with the address sanitizer enabled, highlights the
+ write after free bug described above.
+
+ This commit resolves this issue by adding a new class specifically for
+ the purpose of managing the starting_up flag. As well as setting, and
+ then clearing the starting_up flag, this new class increments, and
+ then decrements the reference count on the remote_target object. This
+ prevents the remote_target from being deleted until after the flag has
+ been reset.
+
+ The gdb.server/server-connect.exp now runs cleanly with the address
+ sanitizer enabled.
+
+2021-12-03 Mike Frysinger <vapier@gentoo.org>
+
+ libctf: workaround automake bug with conditional info pages
+ It looks like automake makes assumptions about its ability to build info
+ pages based on the GNU standard behavior of shipping info pages with the
+ distributions. So even though the info pages were conditionalized, and
+ automake disabled some of the targets, it was still creeping in by way
+ of unconditional INFO_DEPS settings.
+
+ We can workaround this by adding a stub target for the info page when
+ building info pages are disabled. This tricks automake into disabling
+ its own extended generation target. I'll follow up with the automake
+ folks to see what they think.
+
+2021-12-03 Chenghua Xu <xuchenghua@loongson.cn>
+
+ Add myself and Zhensong Liu as the LoongArch port maintainer.
+
+2021-12-03 Alan Modra <amodra@gmail.com>
+
+ Revert "Re: Don't compile some opcodes files when bfd is 32-bit only"
+ This reverts commit 7a53275579e7cec9389ccb924f5ecf69e8d89d41.
+ The bpf sim doesn't work with a 32-bit bfd after all.
+
+2021-12-03 GDB Administrator <gdbadmin@sourceware.org>
+
+ Automatic date update in version.in
+
+2021-12-02 Simon Marchi <simon.marchi@polymtl.ca>
+
+ gdb: remove unexpected xstrdup in _initialize_maint_test_settings
+ That xstrdup is not correct, since we are assigning an std::string. The
+ result of xstrdup is used to initialize the string, and then lost
+ forever. Remove it.
+
+ Change-Id: Ief7771055e4bfd643ef3b285ec9fb7b1bfd14335
+
+2021-12-02 Nick Clifton <nickc@redhat.com>
+
+ Fix illegal memory access whilst parsing corrupt DWARF debug information.
+ PR 28645
+ * dwarf.c (process_cu_tu_index): Add test for overruning section
+ whilst processing slots.
+
+2021-12-02 Tom de Vries <tdevries@suse.de>
+
+ [gdb/tdep] Fix avx512 -m32 support in gdbserver
+ PR27257 reports a problem that can be reproduced as follows:
+ - use x86_64 machine with avx512 support
+ - compile a hello world with -m32 to a.out
+ - start a gdbserver session with a.out
+ - use gdb to connect to the gdbserver session
+
+ This makes us run into:
+ ...
+ Listening on port 2346
+ Remote debugging from host ::1, port 34940
+ src/gdbserver/regcache.cc:257: \
+ A problem internal to GDBserver has been detected.
+ Unknown register zmm16h requested
+ ...
+
+ The problem is that i387_xsave_to_cache in gdbserver/i387-fp.cc can't find a
+ register zmm16h in the register cache.
+
+ To understand how this happens, first some background.
+
+ SSE has 16 128-bit wide xmm registers.
+
+ AVX extends the SSE registers set as follows:
+ - it extends the 16 existing 128-bit wide xmm registers to 256-bit wide ymm
+ registers.
+
+ AVX512 extends the AVX register set as follows:
+ - it extends the 16 existing 256-bit wide ymm registers to 512-bit wide zmm
+ registers.
+ - it adds 16 additional 512-bit wide zmm registers (with corresponding ymm and
+ xmm subregisters added as well)
+
+ However, in 32-bit mode, there are only 8 xmm/ymm/zmm registers.
+
+ The problem we're running into is that gdbserver/i387-fp.cc uses these
+ constants to describe the size of the register file:
+ ...
+ static const int num_avx512_zmmh_low_registers = 16;
+ static const int num_avx512_zmmh_high_registers = 16;
+ static const int num_avx512_ymmh_registers = 16;
+ static const int num_avx512_xmm_registers = 16;
+ ...
+ which are all incorrect for the 32-bit case.
+
+ Fix this by replacing the constants with variables that have the appropriate
+ values in 64-bit and 32-bit mode.
+
+ Tested on x86_64-linux with native and unix/-m32.
+
+2021-12-02 Simon Marchi <simon.marchi@polymtl.ca>
+
+ gdb/testsuite: update tests looking for "DWARF 2" debug format
+ Commit ab557072b8ec ("gdb: use actual DWARF version in compunit's
+ debugformat field") changes the debug format string in "info source" to
+ show the actual DWARF version, rather than always show "DWARF 2".
+
+ However, it failed to consider that some tests checked for the "DWARF 2"
+ string to see if the test program is compiled with DWARF debug
+ information. Since everything is compiled with DWARF 4 or 5 nowadays,
+ that changed the behavior of those tests. Notably, it prevent the
+ tests using skip_inline_var_tests to run.
+
+ Grep through the testsuite for "DWARF 2" and change all occurrences I
+ could find to use "DWARF [0-9]" instead (that string is passed to TCL's
+ string match).
+
+ Change-Id: Ic7fb0217fb9623880c6f155da6becba0f567a885
+
+2021-12-02 Joel Brobecker <brobecker@adacore.com>
+
+ (PPC64) fix handling of fixed-point values when using "return" command
+ In the gdb.ada/fixed_points_function.exp testcase, we have the following
+ Ada code...
+
+ type FP1_Type is delta 0.1 range -1.0 .. +1.0; -- Ordinary
+ function Call_FP1 (F : FP1_Type) return FP1_Type is
+ begin
+ FP1_Arg := F;
+ return FP1_Arg;
+ end Call_FP1;
+
+ ... used as follow:
+
+ F1 : FP1_Type := 1.0;
+ F1 := Call_FP1 (F1);
+
+ The testcase, among other things, verifies that "return" works
+ properly as follow:
+
+ | (gdb) return 1.0
+ | Make pck.call_fp1 return now? (y or n) y
+ | [...]
+ | 9 F1 := Call_FP1 (F1);
+ | (gdb) next
+ | (gdb) print f1
+ | $1 = 0.0625
+
+ The output of the last command shows that we returned the wrong
+ value. The value printed gives a clue about the problem, since
+ it is 1/16th of the value we expected, where 1/16 is FP1_Type's
+ scaling factor.
+
+ The problem, here, comes from the fact that the function
+ handling return values for base types (ppc64_sysv_abi_return_value_base)
+ writes the return value using unpack_long which, upon seeing that
+ the value being unpacked is a fixed point type, applies the scaling
+ factor, to get the integer-representation of our fixed-point value
+ (similar to what it does with floats, for instance).
+
+ So, the fix consists in teaching ppc64_sysv_abi_return_value_base
+ about fixed-point types, and to avoid the unwanted application
+ of the scaling factor.
+
+ Note that the "finish" function, on the other hand, does not
+ suffer from this issue, simply becaue the value returned by
+ the function is read from register without the use of a type,
+ thus avoiding an unwanted application of a scaling factor.
+
+ No test added, as this change is already tested by
+ gdb.ada/fixed_points_function.exp.
+
+ Co-Authored-By: Tristan Gingold <gingold@adacore.com>
+
+2021-12-02 Joel Brobecker <brobecker@adacore.com>
+
+ (RISCV) fix handling of fixed-point type return values
+ This commit adds support for TYPE_CODE_FIXED_POINT types for
+ "finish" and "return" commands.
+
+ Consider the following Ada code...
+
+ type FP1_Type is delta 0.1 range -1.0 .. +1.0; -- Ordinary
+ function Call_FP1 (F : FP1_Type) return FP1_Type is
+ begin
+ FP1_Arg := F;
+ return FP1_Arg;
+ end Call_FP1;
+
+ ... used as follow:
+
+ F1 : FP1_Type := 1.0;
+ F1 := Call_FP1 (F1);
+
+ "finish" currently behaves as follow:
+
+ | (gdb) finish
+ | [...]
+ | Value returned is $1 = 0
+
+ We expect the returned value to be "1".
+
+ Similarly, "return" makes the function return the wrong value:
+
+ | (gdb) return 1.0
+ | Make pck.call_fp1 return now? (y or n) y
+ | [...]
+ | 9 F1 := Call_FP1 (F1);
+ | (gdb) next
+ | (gdb) print f1
+ | $1 = 0.0625
+
+ (we expect it to print "1" instead).
+
+ This problem comes from the handling of integral return values
+ when the return value is actually fixed point type. Our type
+ here is actually a range of a fixed point type, but the same
+ principles should also apply to pure fixed-point types. For
+ the record, here is what the debugging info looks like:
+
+ <1><238>: Abbrev Number: 2 (DW_TAG_subrange_type)
+ <239> DW_AT_lower_bound : -16
+ <23a> DW_AT_upper_bound : 16
+ <23b> DW_AT_name : pck__fp1_type
+ <23f> DW_AT_type : <0x248>
+
+ <1><248>: Abbrev Number: 4 (DW_TAG_base_type)
+ <249> DW_AT_byte_size : 1
+ <24a> DW_AT_encoding : 13 (signed_fixed)
+ <24b> DW_AT_binary_scale: -4
+ <24c> DW_AT_name : pck__Tfp1_typeB
+ <250> DW_AT_artificial : 1
+
+ ... where the scaling factor is 1/16.
+
+ Looking at the "finish" command, what happens is that riscv_arg_location
+ determines that our return value should be returned by parameter using
+ an integral convention (via builtin type long). And then,
+ riscv_return_value uses a cast to that builtin type long to
+ store the value of into a buffer with the right register size.
+ This doesn't work in our case, because the underlying value
+ returned by the function is unscaled, which means it is 16,
+ and thus the cast is like doing:
+
+ arg_val = (FP1_Type) 16
+
+ ... In other words, it is trying to create an FP1_Type enty whose
+ value is 16. Applying the scaling factor, that's 256, and because
+ the size of FP1_Type is 1 byte, we overflow and thus it ends up
+ being zero.
+
+ The same happen with the "return" function, but the other way around.
+
+ The fix consists in handling fixed-point types separately from
+ integral types.
+
+2021-12-02 Joel Brobecker <brobecker@adacore.com>
+
+ (ARM/fixed-point) wrong value shown by "finish" command:
+ Consider the following Ada code:
+
+ type FP1_Type is delta 0.1 range -1.0 .. +1.0; -- Ordinary
+ FP1_Arg : FP1_Type := 0.0;
+
+ function Call_FP1 (F : FP1_Type) return FP1_Type is
+ begin
+ FP1_Arg := F;
+ return FP1_Arg;
+ end Call_FP1;
+
+ After having stopped inside function Call_FP1 as follow:
+
+ Breakpoint 1, pck.call_fp1 (f=1) at /[...]/pck.adb:5
+ 5 FP1_Arg := F;
+
+ Returning from that function call using "finish" should show
+ that the function return "1.0" (the same value as was passed
+ as an argument). However, this is not the case:
+
+ (gdb) finish
+ Run till exit from #0 pck.call_fp1 (f=1)
+ [...]
+ 9 F1 := Call_FP1 (F1);
+ Value returned is $1 = 0
+
+ This patch enhances the extraction of the return value to know about
+ fixed point types.
+
+2021-12-02 Xavier Roirand <roirand@adacore.com>
+
+ (Ada/AArch64) fix fixed point argument passing in inferior funcall
+ Consider the following code:
+
+ type FP1_Type is delta 0.1 range -1.0 .. +1.0; -- Ordinary
+
+ function Call_FP1 (F : FP1_Type) return FP1_Type is
+ begin
+ return F;
+ end Call_FP1;
+
+ When the default in GCC is to generate proper DWARF info for fixed point
+ types, then in gdb, printing the result of a call to call_fp1 with a
+ decimal parameter leads to:
+
+ (gdb) p call_fp1(0.5)
+ $1 = 0
+
+ The displayed value is wrong, and we actually expected:
+
+ (gdb) p call_fp1(0.5)
+ $1 = 0.5
+
+ What happened is that our fixed point type parameter got promoted to a
+ 32bit integer because we detected that the length of that object was less
+ than 4 bytes. The compiler does not perform this promotion and therefore
+ GDB should not either.
+
+ This patch fixes the behavior described above.
+
+2021-12-02 Tom Tromey <tromey@adacore.com>
+
+ Implement 'task apply'
+ This adds a 'task apply' command, which is the Ada tasking analogue of
+ 'thread apply'. Unlike 'thread apply', it doesn't offer the
+ 'ascending' flag; but otherwise it's essentially the same.
+
+ Add "task" keyword to the "watch" command
+ Breakpoints in gdb can be made specific to an Ada task using the
+ "task" qualifier. This patch applies this same idea to watchpoints.
+
+2021-12-02 Richard Sandiford <richard.sandiford@arm.com>
+
+ aarch64: Update gas/NEWS for recent changes
+ gas/
+ * NEWS: Mention support for Armv8.8-A and for new system registers.
+
+2021-12-02 Richard Sandiford <richard.sandiford@arm.com>
+
+ aarch64: Add BC instruction
+ This patch adds support for the Armv8.8-A BC instruction.
+ [https://developer.arm.com/documentation/ddi0596/2021-09/Base-Instructions/BC-cond--Branch-Consistent-conditionally-?lang=en]
+
+ include/
+ * opcode/aarch64.h (AARCH64_FEATURE_HBC): New macro.
+ (AARCH64_ARCH_V8_8): Make armv8.8-a imply AARCH64_FEATURE_HBC.
+
+ opcodes/
+ * aarch64-tbl.h (aarch64_feature_hbc): New variable.
+ (HBC, HBC_INSN): New macros.
+ (aarch64_opcode_table): Add BC.C.
+ * aarch64-dis-2.c: Regenerate.
+
+ gas/
+ * doc/c-aarch64.texi: Document +hbc.
+ * config/tc-aarch64.c (aarch64_features): Add "hbc".
+ * testsuite/gas/aarch64/hbc.s, testsuite/gas/aarch64/hbc.d: New test.
+ * testsuite/gas/aarch64/hbc-invalid.s,
+ testsuite/gas/aarch64/hbc-invalid.l,
+ testsuite/gas/aarch64/hbc-invalid.d: New test.
+
+2021-12-02 Richard Sandiford <richard.sandiford@arm.com>
+
+ aarch64: Enforce P/M/E order for MOPS instructions
+ The MOPS instructions should be used as a triple, such as:
+
+ cpyfp [x0]!, [x1]!, x2!
+ cpyfm [x0]!, [x1]!, x2!
+ cpyfe [x0]!, [x1]!, x2!
+
+ The registers should also be the same for each writeback operand.
+ This patch adds a warning for code that doesn't follow this rule,
+ along similar lines to the warning that we already emit for
+ invalid uses of MOVPRFX.
+
+ include/
+ * opcode/aarch64.h (C_SCAN_MOPS_P, C_SCAN_MOPS_M, C_SCAN_MOPS_E)
+ (C_SCAN_MOPS_PME): New macros.
+ (AARCH64_OPDE_A_SHOULD_FOLLOW_B): New aarch64_operand_error_kind.
+ (AARCH64_OPDE_EXPECTED_A_AFTER_B): Likewise.
+ (aarch64_operand_error): Make each data value a union between
+ an int and a string.
+
+ opcodes/
+ * aarch64-tbl.h (MOPS_CPY_OP1_OP2_INSN): Add scan flags.
+ (MOPS_SET_OP1_OP2_INSN): Likewise.
+ * aarch64-opc.c (set_out_of_range_error): Update after change to
+ aarch64_operand_error.
+ (set_unaligned_error, set_reg_list_error): Likewise.
+ (init_insn_sequence): Use a 3-instruction sequence for
+ MOPS P instructions.
+ (verify_mops_pme_sequence): New function.
+ (verify_constraints): Call it.
+ * aarch64-dis.c (print_verifier_notes): Handle
+ AARCH64_OPDE_A_SHOULD_FOLLOW_B and AARCH64_OPDE_EXPECTED_A_AFTER_B.
+
+ gas/
+ * config/tc-aarch64.c (operand_mismatch_kind_names): Add entries
+ for AARCH64_OPDE_A_SHOULD_FOLLOW_B and AARCH64_OPDE_EXPECTED_A_AFTER_B.
+ (operand_error_higher_severity_p): Check that
+ AARCH64_OPDE_A_SHOULD_FOLLOW_B and AARCH64_OPDE_EXPECTED_A_AFTER_B
+ come between AARCH64_OPDE_RECOVERABLE and AARCH64_OPDE_SYNTAX_ERROR;
+ their relative order is not significant.
+ (record_operand_error_with_data): Update after change to
+ aarch64_operand_error.
+ (output_operand_error_record): Likewise. Handle
+ AARCH64_OPDE_A_SHOULD_FOLLOW_B and AARCH64_OPDE_EXPECTED_A_AFTER_B.
+ * testsuite/gas/aarch64/mops_invalid_2.s,
+ testsuite/gas/aarch64/mops_invalid_2.d,
+ testsuite/gas/aarch64/mops_invalid_2.l: New test.
+
+2021-12-02 Richard Sandiford <richard.sandiford@arm.com>
+
+ aarch64: Add support for +mops
+ This patch adds support for FEAT_MOPS, an Armv8.8-A extension
+ that provides memcpy and memset acceleration instructions.
+
+ I took the perhaps controversial decision to generate the individual
+ instruction forms using macros rather than list them out individually.
+ This becomes useful with a follow-on patch to check that code follows
+ the correct P/M/E sequence.
+ [https://developer.arm.com/documentation/ddi0596/2021-09/Base-Instructions?lang=en]
+
+ include/
+ * opcode/aarch64.h (AARCH64_FEATURE_MOPS): New macro.
+ (AARCH64_ARCH_V8_8): Make armv8.8-a imply AARCH64_FEATURE_MOPS.
+ (AARCH64_OPND_MOPS_ADDR_Rd): New aarch64_opnd.
+ (AARCH64_OPND_MOPS_ADDR_Rs): Likewise.
+ (AARCH64_OPND_MOPS_WB_Rn): Likewise.
+
+ opcodes/
+ * aarch64-asm.h (ins_x0_to_x30): New inserter.
+ * aarch64-asm.c (aarch64_ins_x0_to_x30): New function.
+ * aarch64-dis.h (ext_x0_to_x30): New extractor.
+ * aarch64-dis.c (aarch64_ext_x0_to_x30): New function.
+ * aarch64-tbl.h (aarch64_feature_mops): New feature set.
+ (aarch64_feature_mops_memtag): Likewise.
+ (MOPS, MOPS_MEMTAG, MOPS_INSN, MOPS_MEMTAG_INSN)
+ (MOPS_CPY_OP1_OP2_PME_INSN, MOPS_CPY_OP1_OP2_INSN, MOPS_CPY_OP1_INSN)
+ (MOPS_CPY_INSN, MOPS_SET_OP1_OP2_PME_INSN, MOPS_SET_OP1_OP2_INSN)
+ (MOPS_SET_INSN): New macros.
+ (aarch64_opcode_table): Add MOPS instructions.
+ (aarch64_opcode_table): Add entries for AARCH64_OPND_MOPS_ADDR_Rd,
+ AARCH64_OPND_MOPS_ADDR_Rs and AARCH64_OPND_MOPS_WB_Rn.
+ * aarch64-opc.c (aarch64_print_operand): Handle
+ AARCH64_OPND_MOPS_ADDR_Rd, AARCH64_OPND_MOPS_ADDR_Rs and
+ AARCH64_OPND_MOPS_WB_Rn.
+ (verify_three_different_regs): New function.
+ * aarch64-asm-2.c: Regenerate.
+ * aarch64-dis-2.c: Likewise.
+ * aarch64-opc-2.c: Likewise.
+
+ gas/
+ * doc/c-aarch64.texi: Document +mops.
+ * config/tc-aarch64.c (parse_x0_to_x30): New function.
+ (parse_operands): Handle AARCH64_OPND_MOPS_ADDR_Rd,
+ AARCH64_OPND_MOPS_ADDR_Rs and AARCH64_OPND_MOPS_WB_Rn.
+ (aarch64_features): Add "mops".
+ * testsuite/gas/aarch64/mops.s, testsuite/gas/aarch64/mops.d: New test.
+ * testsuite/gas/aarch64/mops_invalid.s,
+ * testsuite/gas/aarch64/mops_invalid.d,
+ * testsuite/gas/aarch64/mops_invalid.l: Likewise.
+
+2021-12-02 Richard Sandiford <richard.sandiford@arm.com>
+
+ aarch64: Add Armv8.8-A system registers
+ Armv8.8-A defines two new system registers: allint and icc_nmiar1_el1.
+ Both of them were previously unmapped. allint supports a 0/1 immediate.
+ [https://developer.arm.com/documentation/ddi0595/2021-09/AArch64-Registers/ALLINT--All-Interrupt-Mask-Bit?lang=en]
+ [https://developer.arm.com/documentation/ddi0595/2021-09/AArch64-Registers/ICC-NMIAR1-EL1--Interrupt-Controller-Non-maskable-Interrupt-Acknowledge-Register-1?lang=en]
+
+ opcodes/
+ * aarch64-opc.c (SR_V8_8): New macro.
+ (aarch64_sys_regs): Add allint and icc_nmiar1_el1.
+ (aarch64_pstatefields): Add allint.
+
+ gas/
+ * testsuite/gas/aarch64/armv8_8-a-sysregs.s,
+ * testsuite/gas/aarch64/armv8_8-a-sysregs.d: New test.
+ * testsuite/gas/aarch64/armv8_8-a-sysregs-invalid.s,
+ * testsuite/gas/aarch64/armv8_8-a-sysregs-invalid.l,
+ * testsuite/gas/aarch64/armv8_8-a-sysregs-invalid.d: New test.
+
+2021-12-02 Richard Sandiford <richard.sandiford@arm.com>
+
+ aarch64: Add id_aa64isar2_el1
+ Armv8.8-A defines a read-only system register called id_aa64isar2_el1.
+ The register was previously RES0 and should therefore be accepted
+ at all architecture levels.
+ [https://developer.arm.com/documentation/ddi0595/2021-09/AArch64-Registers/ID-AA64ISAR2-EL1--AArch64-Instruction-Set-Attribute-Register-2?lang=en]
+
+ opcodes/
+ * aarch64-opc.c (aarch64_sys_regs): Add id_aa64isar2_el1.
+
+ gas/
+ * testsuite/gas/aarch64/sysreg-diagnostic.s: Test writes to
+ id_aa64isar2_el1.
+ * testsuite/gas/aarch64/sysreg-diagnostic.d: Update accordingly.
+ * testsuite/gas/aarch64/sysreg-diagnostic.l: Likewise.
+ * testsuite/gas/aarch64/sysreg.s: Test reads from
+ id_aa64isar2_el1.
+ * testsuite/gas/aarch64/sysreg.d: Update accordingly.
+
+2021-12-02 Richard Sandiford <richard.sandiford@arm.com>
+
+ aarch64: Add support for Armv8.8-A
+ This patch adds skeleton support for -march=armv8.8-a, testing only
+ that it correctly inherits from armv8.7-a.
+
+ include/
+ * opcode/aarch64.h (AARCH64_FEATURE_V8_8): New macro.
+ (AARCH64_ARCH_V8_8): Likewise.
+
+ gas/
+ * doc/c-aarch64.texi: Document armv8.8-a.
+ * config/tc-aarch64.c (aarch64_archs): Add armv8-8-a
+ * testsuite/gas/aarch64/v8-8-a.s,
+ * testsuite/gas/aarch64/v8-8-a.d: New test.
+
+2021-12-02 Richard Sandiford <richard.sandiford@arm.com>
+
+ aarch64: Provide line info for unclosed sequences
+ We warn about MOVPRFX instructions that have no following
+ instruction. This patch adds a line number to the message,
+ which is useful if the assembly code has multiple text sections.
+
+ The new code is unconditional since OBJ_ELF is always defined
+ for aarch64.
+
+ gas/
+ * config/tc-aarch64.h (aarch64_segment_info_type): Add last_file
+ and last_line.
+ * config/tc-aarch64.c (now_instr_sequence): Delete.
+ (force_automatic_sequence_close): Provide a line number when
+ reporting unclosed sequences.
+ (md_assemble): Record the location of the instruction in
+ tc_segment_info.
+ * testsuite/gas/aarch64/sve-movprfx_4.l: Add line number to error
+ message.
+ * testsuite/gas/aarch64/sve-movprfx_7.l: Likewise.
+ * testsuite/gas/aarch64/sve-movprfx_8.l: Likewise.
+
+2021-12-02 Richard Sandiford <richard.sandiford@arm.com>
+
+ aarch64: Tweak insn sequence code
+ libopcodes has some code to check constraints across sequences
+ of consecutive instructions. It was added to support MOVPRFX
+ sequences but is going to be useful for the Armv8.8-A MOPS
+ feature as well.
+
+ Currently the structure has one field to record the instruction
+ that started a sequence and another to record the remaining
+ instructions in the sequence. It's more convenient for the
+ MOPS code if we put the instructions into a single array instead.
+
+ No functional change intended.
+
+ include/
+ * opcode/aarch64.h (aarch64_instr_sequence): Replace num_insns
+ and current_insns with num_added_insns and num_allocated_insns.
+
+ opcodes/
+ * aarch64-opc.c (add_insn_to_sequence): New function.
+ (init_insn_sequence): Update for new aarch64_instr_sequence layout.
+ Add the first instruction to the inst array.
+ (verify_constraints): Update for new aarch64_instr_sequence layout.
+ Don't add the last instruction to the array.
+
+2021-12-02 Richard Sandiford <richard.sandiford@arm.com>
+
+ aarch64: Add maximum immediate value to aarch64_sys_reg
+ The immediate form of MSR has a 4-bit immediate field (in CRm).
+ However, many forms of MSR require a smaller immediate. These cases
+ are identified by value in operand_general_constraint_met_p,
+ but they're now the common case rather than the exception.
+
+ This patch therefore adds the maximum value to the sys_reg
+ description and gets the range from there. It also enforces
+ the minimum of 0, which avoids a situation in which:
+
+ msr dit, #2
+
+ would give the expected:
+
+ Error: immediate value out of range 0 to 1
+
+ whereas:
+
+ msr dit, #-1
+
+ would give:
+
+ Error: immediate value out of range 0 to 15
+
+ (from the later UIMM4 checking).
+
+ Also:
+
+ - we were reporting the first error above against the wrong operand
+ - TCO takes a single-bit immediate, but we previously allowed
+ all 16 values.
+ [https://developer.arm.com/documentation/ddi0596/2021-09/Base-Instructions/MSR--immediate---Move-immediate-value-to-Special-Register-?lang=en]
+
+ opcodes/
+ * aarch64-opc.h (F_REG_MAX_VALUE, F_GET_REG_MAX_VALUE): New macros.
+ * aarch64-opc.c (operand_general_constraint_met_p): Read the
+ maximum MSR immediate value from aarch64_pstatefields.
+ (aarch64_pstatefields): Add the maximum immediate value
+ for each register.
+
+ gas/
+ * testsuite/gas/aarch64/sysreg-4.s: Use an immediate value of 1
+ rather than 8 for the TCO test.
+ * testsuite/gas/aarch64/sysreg-4.d: Update accordingly.
+ * testsuite/gas/aarch64/armv8_2-a-illegal.l: Fix operand number
+ in MSR immediate error messages.
+ * testsuite/gas/aarch64/diagnostic.l: Likewise.
+ * testsuite/gas/aarch64/pan-illegal.l: Likewise.
+ * testsuite/gas/aarch64/ssbs-illegal1.l: Likewise.
+ * testsuite/gas/aarch64/illegal-sysreg-4b.s,
+ * testsuite/gas/aarch64/illegal-sysreg-4b.d,
+ * testsuite/gas/aarch64/illegal-sysreg-4b.l: New test.
+
+2021-12-02 Marcus Nilsson <brainbomb@gmail.com>
+
+ Allow the --visualize-jumps feature to work with the AVR disassembler.
+ * avr-dis.c (avr_operand); Pass in disassemble_info and fill
+ in insn_type on branching instructions.
+
+2021-12-02 Simon Marchi <simon.marchi@polymtl.ca>
+
+ gdb, include: replace pragmas with DIAGNOSTIC macros, fix build with g++ 4.8
+ When introducing this code, I forgot that we had some macros for this.
+ Replace some "manual" pragma diagnostic with some DIAGNOSTIC_* macros,
+ provided by include/diagnostics.h.
+
+ In diagnostics.h:
+
+ - Add DIAGNOSTIC_ERROR, to enable a diagnostic at error level.
+ - Add DIAGNOSTIC_ERROR_SWITCH, to enable -Wswitch at error level, for
+ both gcc and clang.
+
+ Additionally, using DIAGNOSTIC_PUSH, DIAGNOSTIC_ERROR_SWITCH and
+ DIAGNOSTIC_POP seems to misbehave with g++ 4.8, where we see these
+ errors:
+
+ CXX ada-tasks.o
+ /home/smarchi/src/binutils-gdb/gdb/ada-tasks.c: In function void read_known_tasks():
+ /home/smarchi/src/binutils-gdb/gdb/ada-tasks.c:998:10: error: enumeration value ADA_TASKS_UNKNOWN not handled in switch [-Werror=switch]
+ switch (data->known_tasks_kind)
+ ^
+
+ Because of the POP, the diagnostic should go back to being disabled,
+ since it was disabled in the beginning, but that's not what we see
+ here. Versions of GCC >= 5 compile correctly.
+
+ Work around this by making DIAGNOSTIC_ERROR_SWITCH a no-op for GCC < 5.
+
+ Note that this code (already as it exists in master today) enables
+ -Wswitch at the error level even if --disable-werror is passed. It
+ shouldn't be a problem, as it's not like a new enumerator will appear
+ out of nowhere and cause a build error if building with future
+ compilers. Still, for correctness, we would ideally want to ask the
+ compiler to enable -Wswitch at its default level (as if the user had
+ passed -Wswitch on the command-line). There doesn't seem to be a way to
+ do this.
+
+ Change-Id: Id33ebec3de39bd449409ea0bab59831289ffe82d
+
+2021-12-02 Simon Marchi <simon.marchi@polymtl.ca>
+
+ gas: re-generate configure
+ When configuring gas, I get:
+
+ config.status: error: cannot find input file: `doc/Makefile.in'
+
+ This is because configure is out-of-date, re-generate it.
+
+ Change-Id: Iaa5980c282900d9fd23b90f0df25bf8ba3676498
+
+2021-12-02 Simon Marchi <simon.marchi@polymtl.ca>
+
+ libctf: re-generate configure
+ When configuring libctf, I get:
+
+ config.status: error: cannot find input file: `doc/Makefile.in'
+
+ This is because configure is out-of-date, re-generate it.
+
+ Change-Id: Ie69acd33012211a4620661582c7d24ad6d2cd169
+
+2021-12-02 H.J. Lu <hjl.tools@gmail.com>
+
+ x86: Skip __[start|stop]_SECNAME for --gc-sections -z start-stop-gc
+ Don't convert memory load to immediate load on __start_SECNAME and
+ __stop_SECNAME for --gc-sections -z start-stop-gc if all SECNAME
+ sections been garbage collected.
+
+ bfd/
+
+ PR ld/27491
+ * elf32-i386.c (elf_i386_convert_load_reloc): Skip __start_SECNAME
+ and __stop_SECNAME for --gc-sections -z start-stop-gc if the input
+ section been garbage collected.
+ * elf64-x86-64.c (elf_x86_64_convert_load_reloc): Likewise.
+ * elfxx-x86.h (elf_x86_start_stop_gc_p): New function.
+
+ ld/
+ PR ld/27491
+ * testsuite/ld-i386/i386.exp: Run PR ld/27491 tests.
+ * testsuite/ld-x86-64/x86-64.exp: Likewise.
+ * testsuite/ld-i386/pr27491-1.s: New file.
+ * testsuite/ld-i386/pr27491-1a.d: Likewise.
+ * testsuite/ld-i386/pr27491-1b.d: Likewise.
+ * testsuite/ld-i386/pr27491-1c.d: Likewise.
+ * testsuite/ld-i386/pr27491-2.d: Likewise.
+ * testsuite/ld-i386/pr27491-2.s: Likewise.
+ * testsuite/ld-i386/pr27491-3.d: Likewise.
+ * testsuite/ld-i386/pr27491-3.s: Likewise.
+ * testsuite/ld-i386/pr27491-4.d: Likewise.
+ * testsuite/ld-i386/pr27491-4a.s: Likewise.
+ * testsuite/ld-i386/pr27491-4b.s: Likewise.
+ * testsuite/ld-x86-64/pr27491-1.s: Likewise.
+ * testsuite/ld-x86-64/pr27491-1a.d: Likewise.
+ * testsuite/ld-x86-64/pr27491-1b.d: Likewise.
+ * testsuite/ld-x86-64/pr27491-1c.d: Likewise.
+ * testsuite/ld-x86-64/pr27491-2.d: Likewise.
+ * testsuite/ld-x86-64/pr27491-2.s: Likewise.
+ * testsuite/ld-x86-64/pr27491-3.d: Likewise.
+ * testsuite/ld-x86-64/pr27491-3.s: Likewise.
+ * testsuite/ld-x86-64/pr27491-4.d: Likewise.
+ * testsuite/ld-x86-64/pr27491-4a.s: Likewise.
+ * testsuite/ld-x86-64/pr27491-4b.s: Likewise.
+
+2021-12-02 Mike Frysinger <vapier@gentoo.org>
+
+ bfd: delete unused proto settings
+ These have been around for decades but don't appear to be used, and
+ trying to build them (e.g. `make archive.p archive.ip`) doesn't work,
+ so just delete it all.
+
+ gas: merge doc subdir up a level
+ This avoids a recursive make into the doc subdir and speeds up the
+ build slightly. It also allows for more parallelism.
+
+ libctf: merge doc subdir up a level
+ This avoids a recursive make into the doc subdir and speeds up the
+ build slightly. It also allows for more parallelism.
+
+2021-12-02 Simon Marchi <simon.marchi@polymtl.ca>
+
+ gdb: use actual DWARF version in compunit's debugformat field
+ The "info source" command, with a DWARF-compile program, always show
+ that the debug info is "DWARF 2":
+
+ (gdb) info source
+ Current source file is test.c
+ Compilation directory is /home/smarchi/build/binutils-gdb/gdb
+ Located in /home/smarchi/build/binutils-gdb/gdb/test.c
+ Contains 2 lines.
+ Source language is c.
+ Producer is GNU C17 9.3.0 -mtune=generic -march=x86-64 -g3 -gdwarf-5 -O0 -fasynchronous-unwind-tables -fstack-protector-strong -fstack-clash-protection -fcf-protection.
+ Compiled with DWARF 2 debugging format.
+ Includes preprocessor macro info.
+
+ Change it to display the actual DWARF version:
+
+ (gdb) info source
+ Current source file is test.c
+ Compilation directory is /home/smarchi/build/binutils-gdb/gdb
+ Located in /home/smarchi/build/binutils-gdb/gdb/test.c
+ Contains 2 lines.
+ Source language is c.
+ Producer is GNU C17 9.3.0 -mtune=generic -march=x86-64 -g3 -gdwarf-5 -O0 -fasynchronous-unwind-tables -fstack-protector-strong -fstack-clash-protection -fcf-protection.
+ Compiled with DWARF 5 debugging format.
+ Includes preprocessor macro info.
+
+ The comp_unit_head::version field is guaranteed to be between 2 and 5,
+ thanks to the check in read_comp_unit_head. So we can still use static
+ strings to pass to record_debugformat, and keep it efficient.
+
+ In the future, when somebody will update GDB to support DWARF 6, they'll
+ hit this assert and have to update this code.
+
+ Change-Id: I3270b7ebf5e9a17b4215405bd2e365662a4d6172
+
+2021-12-02 H.J. Lu <hjl.tools@gmail.com>
+
+ elf: Discard input .note.gnu.build-id sections
+ 1. Discard input .note.gnu.build-id sections.
+ 2. Clear the build ID field before writing.
+ 3. Use bfd_make_section_anyway_with_flags to create the output
+ .note.gnu.build-id section.
+
+ PR ld/28639
+ * ldelf.c (ldelf_after_open): Discard input .note.gnu.build-id
+ sections, excluding the first one.
+ (write_build_id): Clear the build ID field before writing.
+ (ldelf_setup_build_id): Use bfd_make_section_anyway_with_flags
+ to create the output .note.gnu.build-id section.
+ * testsuite/ld-elf/build-id.exp: New file.
+ * testsuite/ld-elf/pr28639a.rd: Likewise.
+ * testsuite/ld-elf/pr28639b.rd: Likewise.
+ * testsuite/ld-elf/pr28639c.rd: Likewise.
+ * testsuite/ld-elf/pr28639d.rd: Likewise.
+
+2021-12-02 GDB Administrator <gdbadmin@sourceware.org>
+
+ Automatic date update in version.in
+
+2021-12-01 Mike Frysinger <vapier@gentoo.org>
+
+ binutils: add missing prefix for binutils/index.html rule
+
+2021-12-01 Luca Boccassi <luca.boccassi@gmail.com>
+
+ readelf: recognize FDO Packaging Metadata ELF note. (Correcting snafu during patch application)
+
+2021-12-01 Luca Boccassi <luca.boccassi@gmail.com>
+
+ readelf: recognize FDO Packaging Metadata ELF note
+ As defined on: https://systemd.io/COREDUMP_PACKAGE_METADATA/
+ this note will be used starting from Fedora 36. Allow
+ readelf --notes to pretty print it:
+
+ Displaying notes found in: .note.package
+ Owner Data size Description
+ FDO 0x00000039 FDO_PACKAGING_METADATA
+ Packaging Metadata: {"type":"deb","name":"fsverity-utils","version":"1.3-1"}
+
+2021-12-01 Tom de Vries <tdevries@suse.de>
+
+ [gdb/testsuite] Fix typo in gdb.multi/multi-arch-exec.exp
+ With gdb.multi/multi-arch-exec.exp I run into:
+ ...
+ Running src/gdb/testsuite/gdb.multi/multi-arch-exec.exp ...
+ ERROR: tcl error sourcing src/gdb/testsuite/gdb.multi/multi-arch-exec.exp.
+ ERROR: wrong # args: extra words after "else" clause in "if" command
+ while executing
+ "if [istarget "powerpc64*-*-*"] {
+ set march "-m64"
+ } else if [istarget "s390*-*-*"] {
+ set march "-m31"
+ } else {
+ set march "-m32"
+ }"
+ ...
+
+ Fix the else if -> elseif typo.
+
+ Tested on x86_64-linux.
+
+2021-12-01 Tom de Vries <tdevries@suse.de>
+
+ [gdb/testsuite] Fix gdb.arch/i386-pkru.exp on linux
+ When running test-case gdb.arch/i386-pkru.exp on a machine with "Memory
+ Protection Keys for Userspace" support, we run into:
+ ...
+ (gdb) PASS: gdb.arch/i386-pkru.exp: probe PKRU support
+ print $pkru^M
+ $2 = 1431655764^M
+ (gdb) FAIL: gdb.arch/i386-pkru.exp: pkru register
+ ...
+
+ The test-case expects the $pkru register to have the default value 0, matching
+ the "init state" of 0 defined by the XSAVE hardware.
+
+ Since linux kernel version v4.9 containing commit acd547b29880 ("x86/pkeys:
+ Default to a restrictive init PKRU"), the register is set to 0x55555554 by
+ default (which matches the printed decimal value above).
+
+ Fix the FAIL by accepting this value for linux.
+
+ Tested on x86_64-linux.
+
+2021-12-01 Nick Clifton <nickc@redhat.com>
+
+ Fix the fields in the x_n union inside the the x_file structure so that pointers can be stored.
+ PR 28630
+ * coff/internal.h (x_n): Use bfd_hostptr_t for the fields in this
+ structure.
+
+2021-12-01 Andrew Burgess <aburgess@redhat.com>
+
+ gdb/remote: use scoped_restore to control starting_up flag
+ This commit makes use of a scoped_restore object to control the
+ remote_state::starting_up flag within the remote_target::start_remote
+ method.
+
+ Ideally I would have liked to create the scoped_restore inside
+ start_remote and just leave the restore in place until the end of the
+ scope, however, I'm worried that doing this would change the behaviour
+ of GDB. Specifically, in start_remote, the following code is executed
+ once the starting_up flag has been restored to its previous value:
+
+ if (breakpoints_should_be_inserted_now ())
+ insert_breakpoints ();
+
+ I think (but am not 100% sure) that calling install_breakpoints could
+ end up back inside remote_target::can_download_tracepoint, which does
+ check the value of remote_state::starting_up. And so, I'm concerned
+ that leaving the scoped_restore in place until the end of start_remote
+ will cause a possible change in behaviour.
+
+ To avoid this, and to leave things as close to the current behaviour
+ as possible, I've split remote_target::start_remote into two, there's
+ the main function body which moves into remote_target::start_remote_1,
+ this function uses the scoped_restore to change the ::starting_up
+ flag, then there's the old remote_target::start_remote, which now just
+ calls ::start_remote_1, and then does the insert_breakpoints call.
+
+ There should be no user visible changes after this commit, unless
+ there's a situation where the ::starting_up flag could previously have
+ been left set, if this was the case, then this situation should no
+ longer be possible.
+
+2021-12-01 Simon Marchi <simon.marchi@polymtl.ca>
+
+ gdb.base/corefile-buildid.exp: fix DUPLICATEs when failing to generate a core file
+ When my system isn't properly configured to generate core files in the
+ local directory, I see these DUPLICATEs:
+
+ DUPLICATE: gdb.base/corefile-buildid.exp: could not generate core file
+
+ Fix that by having a single with_test_prefix around that message and
+ what follows.
+
+ Change-Id: I4ac245fcce1c666db56e3bad3582aa17f183dcba
+
+2021-12-01 Mike Frysinger <vapier@gentoo.org>
+
+ gold: enable silent build rules
+
+2021-12-01 GDB Administrator <gdbadmin@sourceware.org>
+
+ Automatic date update in version.in
+
+2021-11-30 Carl Love <cel@us.ibm.com>
+
+ gdb: Powerpc fix gdb.multi/multi-arch-exec.exp test
+ The expect file has a procedure append_arch_options which sets march based
+ the istarget. The current if / else statement does not check for
+ powerpc64. The else statement is hit which sets march to -m32. This
+ results in compilation errors on 64-bit PowerPC.
+
+ This patch adds an if statement to check for powerpc64 and if true sets mach
+ to -m64.
+
+ The patch was tested on a Power 10 system. No compile errors were generated.
+ The test completes with 1 expected pass and no failures.
+
+2021-11-30 Mike Frysinger <vapier@gentoo.org>
+
+ binutils: regenerate Makefile.in after doc/ changes
+
+2021-11-30 Roland McGrath <mcgrathr@google.com>
+
+ Fix missing build dependency for binutils man pages
+ binutils/
+ * doc/local.mk: Give each man page target its missing dependency on
+ doc/$(am__dirstamp).
+
+2021-11-30 Richard Sandiford <richard.sandiford@arm.com>
+
+ aarch64: Add missing system registers [PR27145]
+ This patch adds support for various system registers, up to Armv8.7-A.
+ This includes all the registers that were mentioned in the PR and that
+ hadn't become supported since.
+
+ opcodes/
+ PR aarch64/27145
+ * aarch64-opc.c (SR_V8_4): Remove duplicate definition.
+ (SR_V8_6, SR_V8_7, SR_GIC, SR_AMU): New macros.
+ (aarch64_sys_regs): Add missing entries (up to Armv8.7-A).
+
+ gas/
+ PR aarch64/27145
+ * testsuite/gas/aarch64/sysreg-8.s,
+ * testsuite/gas/aarch64/sysreg-8.d,
+ * testsuite/gas/aarch64/illegal-sysreg-8.s,
+ * testsuite/gas/aarch64/illegal-sysreg-8.d,
+ * testsuite/gas/aarch64/illegal-sysreg-8.l,
+ * testsuite/gas/aarch64/illegal-sysreg-8b.s,
+ * testsuite/gas/aarch64/illegal-sysreg-8b.d,
+ * testsuite/gas/aarch64/illegal-sysreg-8b.l: New tests.
+ * testsuite/gas/aarch64/sysreg.s: Change system register numbers
+ to ones that are still unallocated.
+ * testsuite/gas/aarch64/sysreg.d: Update accordingly.
+
+2021-11-30 Richard Sandiford <richard.sandiford@arm.com>
+
+ aarch64: Make LOR registers conditional on +lor
+ We have a +lor feature flag for the Limited Ordering Regions
+ extension, but the associated registers didn't use it.
+
+ opcodes/
+ * aarch64-opc.c (SR_LOR): New macro.
+ (aarch64_sys_regs): Use it for lorc_el1, lorea_el1, lorn_el1 and
+ lorsa_el1.
+
+ gas/
+ * testsuite/gas/aarch64/sysreg-7.s: Enable +lor.
+ * testsuite/gas/aarch64/illegal-sysreg-7.s: Test for LOR registers
+ without +lor.
+ * testsuite/gas/aarch64/illegal-sysreg-7.d: Update accordingly.
+ * testsuite/gas/aarch64/illegal-sysreg-7.l: Likewise.
+
+2021-11-30 Richard Sandiford <richard.sandiford@arm.com>
+
+ aarch64: Remove ZIDR_EL1
+ ZIDR_EL1 was part of an early version of SVE, but didn't make
+ it to the final release.
+
+ opcodes/
+ * aarch64-opc.c (aarch64_sys_regs): Remove zidr_el1 entry.
+
+ gas/
+ * testsuite/gas/aarch64/sve-sysreg.s: Remove zidr_el1.
+ * testsuite/gas/aarch64/sve-sysreg.d: Update accordingly.
+ * testsuite/gas/aarch64/sve-sysreg-invalid.l: Likewise.
+
+2021-11-30 Richard Sandiford <richard.sandiford@arm.com>
+
+ aarch64: Allow writes to MFAR_EL3
+ MFAR_EL3 is a read/write register, but was incorrectly marked as
+ read-only
+ [https://developer.arm.com/documentation/ddi0601/2021-09/AArch64-Registers/MFAR-EL3--PA-Fault-Address-Register?lang=en]
+
+ opcodes/
+ * aarch64-opc.c (aarch64_sys_regs): Mark mfar_el3 as read-write.
+
+ gas/
+ * testsuite/gas/aarch64/rme.s: Test writing to mfar_el3.
+ * testsuite/gas/aarch64/rme.d: Update accordingly.
+ * testsuite/gas/aarch64/rme-invalid.s: Delete.
+ * testsuite/gas/aarch64/rme-invalid.l: Likewise.
+ * testsuite/gas/aarch64/rme-invalid.d: Likewise.
+
+2021-11-30 Richard Sandiford <richard.sandiford@arm.com>
+
+ aarch64: Mark PMSIDR_EL1 as read-only
+ We were incorrectly allowing writes to PMSIDR_EL1, which is
+ a read-only register.
+ [https://developer.arm.com/documentation/ddi0595/2021-09/AArch64-Registers/PMSIDR-EL1--Sampling-Profiling-ID-Register?lang=en]
+
+ opcodes/
+ * aarch64-opc.c (aarch64_sys_regs): Make pmsidr_el1 as F_REG_READ.
+
+ gas/
+ * testsuite/gas/aarch64/msr.s: Remove write to pmsidr_el1.
+ * testsuite/gas/aarch64/msr.d: Update accordingly.
+ * testsuite/gas/aarch64/illegal-sysreg-2.s,
+ * testsuite/gas/aarch64/illegal-sysreg-2.d,
+ * testsuite/gas/aarch64/illegal-sysreg-2.l: New test.
+
+2021-11-30 Richard Sandiford <richard.sandiford@arm.com>
+
+ aarch64: Remove duplicate system register entries
+ There is a lot of overlap between the ETM and ETE system registers,
+ so some registers were listed twice.
+
+ Already tested by etm.[sd] and ete.[sd].
+
+ opcodes/
+ * aarch64-opc.c (aarch64_sys_regs): Combine ETE and ETM blocks
+ and remove redundant entries.
+
+ gas/
+ * testsuite/gas/aarch64/etm.s: Remove duplicated test.
+ * testsuite/gas/aarch64/etm.d: Update accordingly.
+
+2021-11-30 Richard Sandiford <richard.sandiford@arm.com>
+
+ aarch64: Check for register aliases before mnemonics
+ Previously we would not accept:
+
+ A .req B
+
+ if A happened to be the name of an instruction. Adding new
+ instructions could therefore invalidate existing register aliases.
+
+ I noticed this with a test that used "zero" as a register alias
+ for "xzr", where "zero" is now also the name of an SME instruction.
+ I don't have any evidence that "real" code is doing this, but it
+ seems at least plausible.
+
+ This patch switches things so that we check for register aliases
+ first. It might slow down parsing slightly, but the difference
+ is unlikely to be noticeable.
+
+ Things like:
+
+ b .req + 0
+
+ still work, since create_register_alias checks for " .req ",
+ and with the input scrubber, we'll only keep whitespace after
+ .req if it's followed by another name. If there's some valid
+ expression that I haven't thought about that is scrubbed to
+ " .req ", users could avoid the ambiguity by wrapping .req
+ in parentheses.
+
+ The new test for invalid aliases already passed. I just wanted
+ something to exercise the !dot condition.
+
+ I can't find a way of exercising the (existing) p == base condition,
+ but I'm not brave enough to say that it can never happen. If it does
+ happen, get_mnemonic_name would return an empty string.
+
+ gas/
+ * config/tc-aarch64.c (opcode_lookup): Move mnemonic extraction
+ code to...
+ (md_assemble): ...here. Check for register aliases first.
+ * testsuite/gas/aarch64/register_aliases.d,
+ testsuite/gas/aarch64/register_aliases.s: Test for a register
+ alias called "zero".
+ * testsuite/gas/aarch64/register_aliases_invalid.d,
+ testsuite/gas/aarch64/register_aliases_invalid.l,
+ testsuite/gas/aarch64/register_aliases_invalid.s: New test.
+
+2021-11-30 Andrew Burgess <aburgess@redhat.com>
+
+ gdb/python: don't use the 'p' format for parsing args
+ When running the gdb.python/py-arch.exp tests on a GDB built
+ against Python 2 I ran into some errors. The problem is that this
+ test script exercises the gdb.Architecture.integer_type method, and
+ this method uses 'p' as an argument format specifier in a call to
+ gdb_PyArg_ParseTupleAndKeywords.
+
+ Unfortunately this specified was only added in Python 3.3, so will
+ cause an error for earlier versions of Python.
+
+ This commit switches to use the 'O' specifier to collect a PyObject,
+ and then uses PyObject_IsTrue to convert the object to a boolean.
+
+ An earlier version of this patch incorrectly switched from using 'p'
+ to use 'i', however, it was pointed out during review that this would
+ cause some changes in behaviour, for example both of these will work
+ with 'p', but not with 'i':
+
+ gdb.selected_inferior().architecture().integer_type(32, None)
+ gdb.selected_inferior().architecture().integer_type(32, "foo")
+
+ The new approach of using 'O' works fine with these cases. I've added
+ some new tests to cover both of the above.
+
+ There should be no user visible changes after this commit.
+
+2021-11-30 Tom de Vries <tdevries@sdflex.arch.suse.de>
+
+ [gdb/testsuite] Fix gdb.base/style.exp with stub-termcap
+ When running test-case gdb.base/style.exp with a gdb build using
+ stub-termcap.c, we run into:
+ ...
+ (gdb) PASS: gdb.base/style.exp: all styles enabled: frame when width=20
+ ^M<et width 30^M
+ (gdb) FAIL: gdb.base/style.exp: all styles enabled: set width 30
+ ...
+
+ The problem is that we're trying to issue the command "set width 30" while
+ width is set to 20, which causes horizontal scrolling.
+
+ Fix this by resetting the width to 0 before issuing the "set width 30"
+ command.
+
+ Tested on x86_64-linux.
+
+ Bug: https://sourceware.org/bugzilla/show_bug.cgi?id=24582
+
+2021-11-30 Nick Clifton <nickc@redhat.com>
+
+ Use dwarf_vma type for offsets, ranges and section sizes in DWARF decoder.
+ * dwarf.c (find_debug_info_for_offset): Use dwarf_vma type for
+ offsets, sizes and ranges.
+ (display_loc_list): Likewise. Also use print_dwarf_vma to print
+ the offset.
+ (display_loclists_list): Likewise.
+ (display_loc_list_dwo): Likewise.
+ (display_debug_str): Likewise.
+ (display_debug_aranges): Likewise.
+ (display_debug_ranges_list): Likewise.
+ (display_debug_rnglists_list): Likewise.
+ (display_debug_ranges): Likewise.
+
+ ld: pru: Add pru_irq_map output section
+ * scripttempl/pru.sc (.pru_irq_map): Define output section.
+ * testsuite/ld-pru/pru_irq_map-1.d: New test.
+ * testsuite/ld-pru/pru_irq_map-2.d: New test.
+ * testsuite/ld-pru/pru_irq_map.s: New test.
+
+2021-11-30 Andrew Burgess <aburgess@redhat.com>
+
+ gdb/testsuite: check the python module is available before using it
+ The gdb.python/py-inferior-leak.exp test makes use of the tracemalloc
+ module. When running the Python tests with a GDB built against Python
+ 2 I ran into a test failure due to the tracemalloc module not being
+ available.
+
+ This commit adds a new helper function to lib/gdb-python.exp that
+ checks if a named module is available. Using this we can then skip
+ the py-inferior-leak.exp test when the tracemalloc module is not
+ available.
+
+2021-11-30 Andrew Burgess <aburgess@redhat.com>
+
+ gdb: fix disassembler regressions for 32-bit arm
+ After this commit:
+
+ commit 76b43c9b5c2b275cbf4f927bfc25984410cb5dd5
+ Date: Tue Oct 5 15:10:12 2021 +0100
+
+ gdb: improve error reporting from the disassembler
+
+ We started seeing FAILs in the gdb.base/all-architectures*.exp tests,
+ when running on a 32-bit ARM target, though I suspect running on any
+ target that compiles such that bfd_vma is 32-bits would also trigger
+ the failures.
+
+ The problem is that the test is expected GDB's disassembler to print
+ an error like this:
+
+ Cannot access memory at address 0x0
+
+ However, after the above commit we see an error like:
+
+ unknown disassembler error (error = -1)
+
+ The reason for this is this code in opcodes/i386-dis.c (in the
+ print_insn function):
+
+ if (address_mode == mode_64bit && sizeof (bfd_vma) < 8)
+ {
+ (*info->fprintf_func) (info->stream,
+ _("64-bit address is disabled"));
+ return -1;
+ }
+
+ This code effectively disallows us from ever disassembling 64-bit x86
+ code if we compiled GDB with a 32-bit bfd_vma. Notice we return
+ -1 (indicating a failure to disassemble), but never call the
+ memory_error_func callback.
+
+ Prior to the above commit GDB, when it received the -1 return value
+ would assume that a memory error had occurred and just print whatever
+ value happened to be in the memory error address variable, the default
+ value of 0 just happened to be fine because the test had asked GDB to
+ do this 'disassemble 0x0,+4'.
+
+ If we instead change the test to do 'disassemble 0x100,+4' then GDB
+ would (previously) have still reported:
+
+ Cannot access memory at address 0x0
+
+ which makes far less sense.
+
+ In this commit I propose to fix this issue by changing the test to
+ accept either the "Cannot access memory ..." string, or the newer
+ "unknown disassembler error ..." string. With this change done the
+ test now passes.
+
+ However, there is one weakness with this strategy; if GDB broke such
+ that we _always_ reported "unknown disassembler error ..." we would
+ never notice. This clearly would be bad. To avoid this issue I have
+ adjusted the all-architectures*.exp tests so that, when we disassemble
+ for the default architecture (the one selected by "auto") we _only_
+ expect to get the "Cannot access memory ..." error string.
+
+ [ Note: In an ideal world we should be able to disassemble any
+ architecture at all times. There's no reason why the 64-bit x86
+ disassembler requires a 64-bit bfd_vma, other than the code happens
+ to be written that way. We could rewrite the disassemble to not
+ have this requirement, but, I don't plan to do that any time soon. ]
+
+ Further, I have changed the all-architectures*.exp test so that we now
+ disassemble at address 0x100, this should avoid us being able to pass
+ by printing a default address of 0x0. I did originally change the
+ address we disassembled at to 0x4, however, some architectures,
+ e.g. ia64, have a default instruction alignment that is greater than
+ 4, so would still round down to 0x0. I could have just picked 0x8 as
+ an address, but I figured that 0x100 was likely to satisfy most
+ architectures alignment requirements.
+
+2021-11-30 Andrew Burgess <aburgess@redhat.com>
+
+ gdb/python: add gdb.RemoteTargetConnection.send_packet
+ This commits adds a new sub-class of gdb.TargetConnection,
+ gdb.RemoteTargetConnection. This sub-class is created for all
+ 'remote' and 'extended-remote' targets.
+
+ This new sub-class has one additional method over its base class,
+ 'send_packet'. This new method is equivalent to the 'maint
+ packet' CLI command, it allows a custom packet to be sent to a remote
+ target.
+
+ The outgoing packet can either be a bytes object, or a Unicode string,
+ so long as the Unicode string contains only ASCII characters.
+
+ The result of calling RemoteTargetConnection.send_packet is a bytes
+ object containing the reply that came from the remote.
+
+2021-11-30 Andrew Burgess <aburgess@redhat.com>
+
+ gdb: make packet_command function available outside remote.c
+ In a later commit I will add a Python API to access the 'maint packet'
+ functionality, that is, sending a user specified packet to the target.
+
+ To make implementing this easier, this commit refactors how this
+ command is currently implemented so that the packet_command function
+ is now global.
+
+ The new global send_remote_packet function takes an object that is an
+ implementation of an abstract interface. Two functions within this
+ interface are then called, one just before a packet is sent to the
+ remote target, and one when the reply has been received from the
+ remote target. Using an interface object in this way allows (1) for
+ the error checking to be done before the first callback is made, this
+ means we only print out what packet it being sent once we know we are
+ going to actually send it, and (2) we don't need to make a copy of the
+ reply if all we want to do is print it.
+
+ One user visible changes after this commit are the error
+ messages, which I've changed to be less 'maint packet' command
+ focused, this will make them (I hope) better for when
+ send_remote_packet can be called from Python code.
+
+ So: "command can only be used with remote target"
+ Becomes: "packets can only be sent to a remote target"
+
+ And: "remote-packet command requires packet text as argument"
+ Becomes: "a remote packet must not be empty"
+
+ Additionally, in this commit, I've added support for packet replies
+ that contain binary data. Before this commit, the code that printed
+ the reply treated the reply as a C string, it assumed that the string
+ only contained printable characters, and had a null character only at
+ the end.
+
+ One way to show the problem with this is if we try to read the auxv
+ data from a remote target, the auxv data is binary, so, before this
+ commit:
+
+ (gdb) target remote :54321
+ ...
+ (gdb) maint packet qXfer:auxv:read::0,1000
+ sending: "qXfer:auxv:read::0,1000"
+ received: "l!"
+ (gdb)
+
+ And after this commit:
+
+ (gdb) target remote :54321
+ ...
+ (gdb) maint packet qXfer:auxv:read::0,1000
+ sending: "qXfer:auxv:read::0,1000"
+ received: "l!\x00\x00\x00\x00\x00\x00\x00\x00\xf0\xfc\xf7\xff\x7f\x00\x00\x10\x00\x00\x00\x00\x00\x00\x00\xff\xf>
+ (gdb)
+
+ The binary contents of the reply are now printed as escaped hex.
+
+2021-11-30 Andrew Burgess <aburgess@redhat.com>
+
+ gdb/python: introduce gdb.TargetConnection object type
+ This commit adds a new object type gdb.TargetConnection. This new
+ type represents a connection within GDB (a connection as displayed by
+ 'info connections').
+
+ There's three ways to find a gdb.TargetConnection, there's a new
+ 'gdb.connections()' function, which returns a list of all currently
+ active connections.
+
+ Or you can read the new 'connection' property on the gdb.Inferior
+ object type, this contains the connection for that inferior (or None
+ if the inferior has no connection, for example, it is exited).
+
+ Finally, there's a new gdb.events.connection_removed event registry,
+ this emits a new gdb.ConnectionEvent whenever a connection is removed
+ from GDB (this can happen when all inferiors using a connection exit,
+ though this is not always the case, depending on the connection type).
+ The gdb.ConnectionEvent has a 'connection' property, which is the
+ gdb.TargetConnection being removed from GDB.
+
+ The gdb.TargetConnection has an 'is_valid()' method. A connection
+ object becomes invalid when the underlying connection is removed from
+ GDB (as discussed above, this might be when all inferiors using a
+ connection exit, or it might be when the user explicitly replaces a
+ connection in GDB by issuing another 'target' command).
+
+ The gdb.TargetConnection has the following read-only properties:
+
+ 'num': The number for this connection,
+
+ 'type': e.g. 'native', 'remote', 'sim', etc
+
+ 'description': The longer description as seen in the 'info
+ connections' command output.
+
+ 'details': A string or None. Extra details for the connection, for
+ example, a remote connection's details might be
+ 'hostname:port'.
+
+2021-11-30 Nelson Chu <nelson.chu@sifive.com>
+
+ RISC-V: The vtype immediate with more than the defined 8 bits are preserved.
+ According the rvv spec,
+ https://github.com/riscv/riscv-v-spec/blob/master/vtype-format.adoc
+
+ The bits of vtype immediate from 8 to (xlen - 1) should be reserved.
+ Therefore, we should also dump the vtype immediate as numbers, when
+ they are set over 8-bits. I think this is a bug that we used to support
+ vediv extension and use the bit 8 and 9 of vtype, but forgot to update
+ the behavior when removing the vediv.
+
+ Consider the testcases,
+
+ vsetvli a0, a1, 0x700 # the reserved bit 10, 9 and 8 are used.
+ vsetvli a0, a1, 0x400 # the reserved bit 10 is used.
+ vsetvli a0, a1, 0x300 # the reserved bit 9 and 8 are used.
+ vsetvli a0, a1, 0x100 # the reserved bit 8 is used.
+ vsetivli a0, 0xb, 0x300 # the reserved bit 9 and 8 are used.
+ vsetivli a0, 0xb, 0x100 # the reserved bit 8 is used.
+
+ The original objdump shows the following result,
+
+ 0000000000000000 <.text>:
+ 0: 7005f557 vsetvli a0,a1,1792
+ 4: 4005f557 vsetvli a0,a1,1024
+ 8: 3005f557 vsetvli a0,a1,e8,m1,tu,mu
+ c: 1005f557 vsetvli a0,a1,e8,m1,tu,mu
+ 10: f005f557 vsetivli a0,11,e8,m1,tu,mu
+ 14: d005f557 vsetivli a0,11,e8,m1,tu,mu
+
+ But in fact the correct result should be,
+
+ 0000000000000000 <.text>:
+ 0: 7005f557 vsetvli a0,a1,1792
+ 4: 4005f557 vsetvli a0,a1,1024
+ 8: 3005f557 vsetvli a0,a1,768
+ c: 1005f557 vsetvli a0,a1,256
+ 10: f005f557 vsetivli a0,11,768
+ 14: d005f557 vsetivli a0,11,256
+
+ gas/
+ * testsuite/gas/riscv/vector-insns.d: Added testcases to
+ test the reserved bit 8 to (xlen-1) of vtype.
+ * testsuite/gas/riscv/vector-insns.s: Likewise.
+ include/
+ * opcode/riscv.h: Removed OP_MASK_VTYPE_RES and OP_SH_VTYPE_RES,
+ since they are different for operand Vc and Vb.
+ opcodes/
+ * riscv-dis.c (print_insn_args): Updated imm_vtype_res to
+ extract the reserved immediate of vtype correctly.
+
+2021-11-30 Nelson Chu <nelson.chu@sifive.com>
+
+ RISC-V: Dump vset[i]vli immediate as numbers once vsew or vlmul is reserved.
+ Consider the following case,
+
+ vsetvli a0, a1, 0x4 # unrecognized vlmul
+ vsetvli a0, a1, 0x20 # unrecognized vsew
+ vsetivli a0, 0xb, 0x4 # unrecognized vlmul
+ vsetivli a0, 0xb, 0x20 # unrecognized vsew
+
+ For the current dis-assembler, we get the result,
+
+ 0000000000000000 <.text>:
+ 0: 0045f557 vsetvli a0,a1,e8,(null),tu,mu
+ 4: 0205f557 vsetvli a0,a1,e128,m1,tu,mu
+ 8: c045f557 vsetivli a0,11,e8,(null),tu,mu
+ c: c205f557 vsetivli a0,11,e128,m1,tu,mu
+
+ The vsew e128 and vlmul (null) are preserved according to the spec,
+ so dump these fields looks wrong. Consider that we are used to dump
+ the unrecognized csr as csr numbers directly, we should also dump
+ the whole vset[i]vli immediates as numbers, once the vsew or vlmul
+ is reserved. Therefore, following is what I expected,
+
+ 0000000000000000 <.text>:
+ 0: 0045f557 vsetvli a0,a1,4
+ 4: 0205f557 vsetvli a0,a1,32
+ 8: c045f557 vsetivli a0,11,4
+ c: c205f557 vsetivli a0,11,32
+
+ gas/
+ * testsuite/gas/riscv/vector-insns.d: Rewrite the vset[i]vli
+ testcases since we should dump the immediate as numbers once
+ the vsew or vlmul is reserved.
+ * testsuite/gas/riscv/vector-insns.s: Likewise.
+ opcodes/
+ * riscv-dis.c (print_insn_args): The reserved vsew and vlmul
+ are NULL string in the riscv_vsew and riscv_vlmul, so dump the
+ whole imm as numbers once one of them is NULL.
+ * riscv-opc.c (riscv_vsew): Set the reserved vsew to NULL.
+ (riscv_vlmul): Set the reserved vlmul to NULL.
+
+2021-11-30 Mike Frysinger <vapier@gentoo.org>
+
+ zlib: enable silent build rules
+
+ ld: enable silent build rules
+ Also add $(AM_V_xxx) to various manual rules in here.
+
+ libctf: enable silent build rules
+ Also add $(AM_V_xxx) to various manual rules in here.
+
+ gprof: enable silent build rules
+ Also add $(AM_V_xxx) to various manual rules in here.
+
+ binutils: merge doc subdir up a level
+ This avoids a recursive make into the doc subdir and speeds up the
+ build slightly. It also allows for more parallelism.
+
+ binutils: enable silent build rules
+ Also add $(AM_V_xxx) to various manual rules in here.
+
+ bfd: enable silent build rules
+ Also add $(AM_V_xxx) to various manual rules in here.
+
+ opcodes: enable silent build rules
+ Also add $(AM_V_xxx) to various manual rules in here.
+
+2021-11-30 GDB Administrator <gdbadmin@sourceware.org>
+
+ Automatic date update in version.in
+
+2021-11-29 Tom Tromey <tom@tromey.com>
+
+ Allow DW_ATE_UTF for Rust characters
+ The Rust compiler plans to change the encoding of a Rust 'char' type
+ to use DW_ATE_UTF. You can see the discussion here:
+
+ https://github.com/rust-lang/rust/pull/89887
+
+ However, this fails in gdb. I looked into this, and it turns out that
+ the handling of DW_ATE_UTF is currently fairly specific to C++. In
+ particular, the code here assumes the C++ type names, and it creates
+ an integer type.
+
+ This comes from commit 53e710acd ("GDB thinks char16_t and char32_t
+ are signed in C++"). The message says:
+
+ Both places need fixing. But since I couldn't tell why dwarf2read.c
+ needs to create a new type, I've made it use the per-arch built-in
+ types instead, so that the types are only created once per arch
+ instead of once per objfile. That seems to work fine.
+
+ ... which is fine, but it seems to me that it's also correct to make a
+ new character type; and this approach is better because it preserves
+ the type name as well. This does use more memory, but first we
+ shouldn't be too concerned about the memory use of types coming from
+ debuginfo; and second, if we are, we should implement type interning
+ anyway.
+
+ Changing this code to use a character type revealed a couple of
+ oddities in the C/C++ handling of TYPE_CODE_CHAR. This patch fixes
+ these as well.
+
+ I filed PR rust/28637 for this issue, so that this patch can be
+ backported to the gdb 11 branch.
+
+2021-11-29 Aaron Merey <amerey@redhat.com>
+ Tom de Vries <tdevries@suse.de>
+
+ [PR gdb/27026] CTRL-C is ignored when debug info is downloaded
+ During debuginfod downloads, ctrl-c should result in the download
+ being cancelled and skipped. However in some cases, ctrl-c fails to
+ get delivered to gdb during downloading. This can result in downloads
+ being unskippable.
+
+ Fix this by ensuring that target_terminal::ours is in effect for the
+ duration of each download.
+
+ https://sourceware.org/bugzilla/show_bug.cgi?id=27026#c3
+
+2021-11-29 Nick Clifton <nickc@redhat.com>
+
+ strings: Replace references to -u option with references to -U.
+ PR 28632
+
+2021-11-29 Tom de Vries <tdevries@suse.de>
+
+ [gdb/symtab] Fix segfault in search_one_symtab
+ PR28539 describes a segfault in lambda function search_one_symtab due to
+ psymbol_functions::expand_symtabs_matching calling expansion_notify with a
+ nullptr symtab:
+ ...
+ struct compunit_symtab *symtab =
+ psymtab_to_symtab (objfile, ps);
+
+ if (expansion_notify != NULL)
+ if (!expansion_notify (symtab))
+ return false;
+ ...
+
+ This happens as follows. The partial symtab ps is a dwarf2_include_psymtab
+ for some header file:
+ ...
+ (gdb) p ps.filename
+ $5 = 0x64fcf80 "/usr/include/c++/11/bits/stl_construct.h"
+ ...
+
+ The includer of ps is a shared symtab for a partial unit, with as user:
+ ...
+ (gdb) p ps.includer().user.filename
+ $11 = 0x64fc9f0 \
+ "/usr/src/debug/llvm13-13.0.0-1.2.x86_64/tools/clang/lib/AST/Decl.cpp"
+ ...
+
+ The call to psymtab_to_symtab expands the Decl.cpp symtab (and consequently
+ the shared symtab), but returns nullptr because:
+ ...
+ struct dwarf2_include_psymtab : public partial_symtab
+ {
+ ...
+ compunit_symtab *get_compunit_symtab (struct objfile *objfile) const override
+ {
+ return nullptr;
+ }
+ ...
+
+ Fix this by returning the Decl.cpp symtab instead, which fixes the segfault
+ in the PR.
+
+ Tested on x86_64-linux.
+
+ Bug: https://sourceware.org/bugzilla/show_bug.cgi?id=28539
+
+2021-11-29 Nick Clifton <nickc@redhat.com>
+
+ Update description of string's -n option.
+ PR 28632
+ * strings.c (usage): Update desciption of -n option.
+ * doc/binutils.texi: Likewise.
+
+2021-11-29 Tom de Vries <tdevries@suse.de>
+
+ [gdb/testsuite] Fix typo in proc lines
+ Proc lines contains a typo:
+ ...
+ string_form { set $_line_string_form $value }
+ ...
+
+ Remove the incorrect '$' in '$_line_string_form'.
+
+ Tested on x86_64-linux.
+
+2021-11-29 Tom de Vries <tdevries@suse.de>
+
+ [gdb/testsuite] Use unique files in gdb.dwarf2/dw2-lines.exp
+ While debugging a problem in gdb.dwarf2/dw2-lines.exp, I realized that the
+ test-case generates all executables and associated temporary files using the
+ same filenames.
+
+ Fix this by adding a new proc prefix_id in lib/gdb.exp, and using it in the
+ test-case.
+
+ Tested on x86_64-linux.
+
+2021-11-29 Tom de Vries <tdevries@suse.de>
+
+ [gdb/testsuite] Fix gdb.dwarf2/dw2-lines.exp with -m32
+ When running test-case gdb.dwarf2/dw2-lines.exp with target board -unix/-m32,
+ we run into another instance of PR28383, where the dwarf assembler generates
+ 64-bit relocations which are not supported by the 32-bit assembler:
+ ...
+ dw2-lines-dw.S: Assembler messages:^M
+ outputs/gdb.dwarf2/dw2-lines/dw2-lines-dw.S:76: Error: \
+ cannot represent relocation type BFD_RELOC_64^M
+ ...
+
+ Fix this by using _op_offset in _line_finalize_header.
+
+ Tested on x86_64-linux.
+
+2021-11-29 Mike Frysinger <vapier@gentoo.org>
+
+ sim: testsuite: drop most specific istarget checks
+ We'll rely on the toolchain probing to determine whether each arch's
+ tests can be run rather the current configure target. This allows
+ testing all of the ports in a multitarget configuration.
+
+ For now, we don't reformat the files entirely to make it easier to
+ review, and in case we need to make adjustments. Once this feels
+ like it's stable, we can flatten the code a bit by removing the if
+ statement entirely.
+
+2021-11-29 Mike Frysinger <vapier@gentoo.org>
+
+ sim: testsuite: support parallel execution
+ Break up the dejagnu logic so that we can parallelize the testsuite.
+ This takes a page from gcc & gdb where each .exp is run in isolation
+ instead of in serial.
+
+ For most targets, this doesn't make much of a difference as they only
+ have a single .exp. A few (like cris & frv) have multiple .exp though
+ and will see a bit of a speed up.
+
+ The real gain is when testing a multitarget build. This way we can
+ run all the targets in parallel and cut the execution time a bit.
+ On my system, it goes from ~155sec to ~100sec.
+
+ We can gain further speedups by splitting up some of the larger .exp
+ files into smaller groups. We'll do that in a followup though.
+
+2021-11-29 Mike Frysinger <vapier@gentoo.org>
+
+ sim: testsuite: expand arch specific toolchain settings
+ Leverage the new per-port toolchain settings to initialize the env
+ for eeach set of tests. This allows us to run all the tests in a
+ multitarget build if the user sets up the vars. If they don't, we
+ can still skip all the tests.
+
+2021-11-29 Mike Frysinger <vapier@gentoo.org>
+
+ sim: testsuite: setup per-port toolchain settings for multitarget build
+ Gas does not support multitarget builds -- it still only supports
+ a single input & output format. ld is a bit better, but requires
+ manual flags to select the right output. This makes it impossible
+ to run the complete testsuite in a multitarget build.
+
+ To address this limitation, create a suite of FOR_TARGET variables
+ so these can be set to precompiled as & ld programs. It requires
+ a bit of setup ahead of time, but it's a one-time cost, and makes
+ running the full testsuite at once much easier.
+
+2021-11-29 GDB Administrator <gdbadmin@sourceware.org>
+
+ Automatic date update in version.in
+
+2021-11-28 Alan Modra <amodra@gmail.com>
+
+ PR28629 NIOS2 fallout
+ The test exactly matched wrong output.
+
+ PR 28629
+ * testsuite/gas/nios2/relax.d: Update expected output.
+
+2021-11-28 Mike Frysinger <vapier@gentoo.org>
+
+ sim: add checks to core headers to prevent incorrect common building
+ Some of the core sim headers rely on the SIM_AC_OPTION_BITSIZE macro
+ which can change the size of core types. Since these haven't been
+ unified across ports, add checks to make sure they aren't accidentally
+ included when building for all ports. This caught the sim-load file
+ using poisoned headers that it didn't actually need.
+
+ sim: unify syscall.o building
+ Now that we've unified all the syscall tables, this file does not rely
+ on any port-specific settings, so move it up to building as part of the
+ common step so we only do it once in a multibuild.
+
+ sim: drop unused gentmap & nltvals.def logic
+ Now that all ports have switched to target-newlib-* files, there's
+ no need for these files & generating things at build time. So punt
+ the logic and make target-newlib-syscall a hard requirement.
+
+ sim: mcore: switch to new target-newlib-syscall
+ Use the new target-newlib-syscall module. This is needed to merge all
+ the architectures into a single build, and mcore has a custom syscall
+ table for its newlib/libgloss port.
+
+ sim: riscv: switch to new target-newlib-syscall
+ Use the new target-newlib-syscall module. This is needed to merge all
+ the architectures into a single build, and riscv has a custom syscall
+ table for its newlib/libgloss port.
+
+2021-11-28 Mike Frysinger <vapier@gentoo.org>
+
+ sim: cr16: switch to new target-newlib-syscall
+ Use the new target-newlib-syscall module. This is needed to merge all
+ the architectures into a single build, and cr16 has a custom syscall
+ table for its newlib/libgloss port.
+
+ This allows cleaning up the syscall ifdef logic. We know these will
+ always exist now.
+
+2021-11-28 Mike Frysinger <vapier@gentoo.org>
+
+ sim: d10v: switch to new target-newlib-syscall
+ Use the new target-newlib-syscall module. This is needed to merge all
+ the architectures into a single build, and d10v has a custom syscall
+ table for its newlib/libgloss port.
+
+ This allows cleaning up the syscall ifdef logic. We know these will
+ always exist now.
+
+2021-11-28 Mike Frysinger <vapier@gentoo.org>
+
+ sim: sh: switch to new target-newlib-syscall
+ Use the new target-newlib-syscall module. This is needed to merge all
+ the architectures into a single build, and sh has a custom syscall
+ table for its newlib/libgloss port.
+
+2021-11-28 Mike Frysinger <vapier@gentoo.org>
+
+ sim: v850: switch to new target-newlib-syscall
+ Use the new target-newlib-syscall module. This is needed to merge all
+ the architectures into a single build, and v850 has a custom syscall
+ table for its newlib/libgloss port.
+
+ This allows cleaning up the syscall ifdef logic. We know these will
+ always exist now.
+
+2021-11-28 Mike Frysinger <vapier@gentoo.org>
+
+ sim: iq2000/lm32/m32c/moxie/rx: switch to new target-newlib-syscall.h
+ Use the new target-newlib-syscall.h to provide the target syscall
+ defines. These code paths are written specifically for the newlib
+ ABI rather than being generalized, so switching them to the defines
+ rather than trying to go through the dynamic callback conversion
+ seems like the best trade-off for now. Might have to reconsider
+ this in the future.
+
+2021-11-28 Mike Frysinger <vapier@gentoo.org>
+
+ sim: nltvals: pull target syscalls out into a dedicated source file
+ Like we just did for pulling out the errno map, pull out the syscall
+ maps into a dedicated common file. Most newlib ports are using the
+ same syscall map, but not all, which means we have to do a bit more
+ work to migrate.
+
+ This commit adds the maps and switches the ports using the common
+ default syscall table over to it. Ports using unique syscall tables
+ are still using the old targ-map.c logic.
+
+ Switching common ports over is easy by checking NL_TARGET, but the
+ ppc code needs a bit more cleanup here hence its larger diff.
+
+2021-11-28 Mike Frysinger <vapier@gentoo.org>
+
+ sim: frv: resolve syscalls dynamically
+ Avoid use of TARGET_<syscall> defines and rely on the callback layers
+ to resolve these dynamically so we can support multiple syscall layers
+ instead of assuming the newlib/libgloss numbers all the time.
+
+ sim: mn10300: resolve syscalls dynamically
+ Avoid use of TARGET_<syscall> defines and rely on the callback layers
+ to resolve these dynamically so we can support multiple syscall layers
+ instead of assuming the newlib/libgloss numbers all the time.
+
+ sim: nltvals: drop i960
+ This port was dropped from gdb/bfd/sim years ago, so stop including
+ its syscall constants too.
+
+ sim: moxie: fix datadir handling
+ Expand the value at `make` time rather than configure generation time
+ so that we handle $(datarootdir) setting properly.
+
+2021-11-28 GDB Administrator <gdbadmin@sourceware.org>
+
+ Automatic date update in version.in
+
+2021-11-27 Simon Marchi <simon.marchi@polymtl.ca>
+
+ gdb: fix typos in configure
+ The variable names used to restore CFLAGS and LDFLAGS here don't quite
+ match the names used above, resulting in losing the original CFLAGS and
+ LDFLAGS. Fix that.
+
+ Change-Id: I9cc2c3b48b1dc30c31a7143563c893fd6f426a0a
+
+2021-11-27 Mike Frysinger <vapier@gentoo.org>
+
+ sim: hw: mark hw_descriptors const
+
+ sim: testsuite: add dedicated flag for init toolchain tests
+ As we setup more reliable CC_FOR_TARGET variables for each target, the
+ bfin way of overriding it to stuff custom CFLAGS doesn't scale well.
+ Add a dedicated CFLAGS_FOR_TARGET_init setting that each set of tests
+ can setup if they want to add custom options.
+
+ sim: testsuite: clean up arch specific toolchain settings
+ In a multitarget build, we process all targets in order, so make sure
+ the toolchain settings from one don't leak into the next.
+
+2021-11-27 Mike Frysinger <vapier@gentoo.org>
+
+ sim: cris: always search for local rvdummy tool
+ If the board info sets the sim to a basename that is found via $PATH
+ (which is the default dejagnu behavior), the logic here to use its
+ dirname to find rvdummy fails because it looks for `./rvdummy`. So
+ switch it to always use the local build of rvdummy which is the one
+ we want to be testing against in the first place.
+
+ If we get a request for testing against a different setup, we can
+ figure out & document the needs at that point, and then setup some
+ config knobs to control it.
+
+2021-11-27 Tom de Vries <tdevries@suse.de>
+
+ [gdb/testsuite] Fix FAIL in gdb.base/list-missing-source.exp
+ In commit f8080fb7a44 "[gdb/testsuite] Add gdb.base/include-main.exp" a
+ file gdb.base/main.c was added, which caused the following regression:
+ ...
+ (gdb) list^M
+ <gdb.base/main.c>
+ (gdb) FAIL: gdb.base/list-missing-source.exp: list
+ ...
+
+ The problem is that the test-case does not expect to find a file main.c, but
+ now it finds gdb.base/main.c.
+
+ Fix this by using the more specific file name list-missing-source.c.
+
+ Tested on x86_64-linux.
+
+2021-11-27 Mike Frysinger <vapier@gentoo.org>
+
+ sim: testsuite: fix bits-gen EXEEXT handling
+ Add missing $(EXEEXT) to dependencies on bits-gen. These are actually
+ build-only tools, but automake doesn't allow for build & host tools, so
+ the rules are re-using EXEEXT.
+
+2021-11-27 Mike Frysinger <vapier@gentoo.org>
+
+ sim: testsuite: initial support for OS-specific tests
+ We usually test against the newlib/libgloss environment, but for a
+ few ports that also support Linux apps, we want to test that logic
+ too. A lot of the C code is written such that it works with either
+ newlib/libgloss or glibc/linux toolchains, but we have some tests
+ that end up being Linux-specific. Cris has been using the target
+ tuple as a rough proxy for this (where cris*-*-elf is assumed to be
+ newlib/libgloss, and everything else is glibc/linux), but that is a
+ bit too rough, and it doesn't work in a multitarget build.
+
+ So lets create a few stub files that we can do compile tests with
+ to detect the different setups, and then let tests declare which
+ one they require (if they require any at all).
+
+2021-11-27 Mike Frysinger <vapier@gentoo.org>
+
+ sim: testsuite: unify basic C compiler checks
+ Both bfin & cris ports test the C compiler to see if it works, but in
+ their own way. Unify the checks in the common code so we can leverage
+ them in more ports in the future, and collapse the bfin & cris code.
+
+2021-11-27 Mike Frysinger <vapier@gentoo.org>
+
+ sim: testsuite: rework sim_init usage
+ The sim_init function was called by runtest for each test when --tool
+ was set to sim. When we changed to --tool '' to collapse the testsuite
+ dir, the init function was no longer called on every test. However, it
+ was still being called explicitly by config/default.exp. It's not clear
+ why that explicit call ever existed since, in the past, it meant it was
+ redundant.
+
+ Lets drop the single sim_init call in config/default.exp and move it out
+ to all our tests. This replicates the runtest behavior so we can setup
+ variables on a per-test basis which allows us to recollapse the sim_path
+ logic back. We'll also leverage this in the future for toolchain setup.
+
+ Also add a few comments clarifying the overall runtime behavior.
+
+2021-11-27 Mike Frysinger <vapier@gentoo.org>
+
+ sim: cris: fix testsuite hang when sim is missing
+ If the cris sim hasn't been built yet, trying to run its testsuite
+ will hang indefinitely. The common sim APIs already have this, so
+ copy it over to the cris forks of the test+run functions.
+
+2021-11-27 Mike Frysinger <vapier@gentoo.org>
+
+ sim: testsuite: fix objdir handling
+ The tests assume that the cwd is the objdir directory and write its
+ intermediates to there all the time. When using runtest's --objdir
+ setting though, this puts the files in the wrong place. This isn't
+ a big problem currently as we never change --objdir, but in order to
+ support parallel test execution, we're going to start setting that
+ option, so clean up the code ahead of time.
+
+ We also have to tweak some of the cris tests which were making
+ assumptions about the argv[0] value.
+
+2021-11-27 Mike Frysinger <vapier@gentoo.org>
+
+ sim: testsuite: rename global_sim_options to SIMFLAGS_FOR_TARGET
+ Now that all the other toolchain settings have been renamed to match
+ the dejagnu settings of XXX_FOR_TARGET, rename global_sim_options to
+ SIMFLAGS_FOR_TARGET too.
+
+ sim: testsuite: replace global_ld_options with LDFLAGS_FOR_TARGET
+ Only a few tests actually use global_ld_options, but we can replace the
+ sim-specific settings with the dejagnu common LDFLAGS_FOR_TARGET and get
+ the same result.
+
+2021-11-27 GDB Administrator <gdbadmin@sourceware.org>
+
+ Automatic date update in version.in
+
+2021-11-26 John David Anglin <danglin@gcc.gnu.org>
+
+ Fix ifunc test fails on hppa*-*-*
+ 2021-11-26 John David Anglin <danglin@gcc.gnu.org>
+
+ PR ld/27442
+
+ ld/ChangeLog:
+
+ * ld/testsuite/ld-ifunc/ifunc.exp (contains_irelative_reloc): Adjust
+ regexp.
+ Skip static ifunc-using executable test on hppa*-*-*.
+
+2021-11-26 H.J. Lu <hjl.tools@gmail.com>
+
+ gas: Update commit 4780e5e4933
+ Update
+
+ commit 4780e5e4933a2497a5aecc4ceabbbb8e82aaf822
+ Author: Tom de Vries <tdevries@suse.de>
+ Date: Fri Nov 26 09:59:45 2021 +0100
+
+ [gas] Fix file 0 dir with -gdwarf-5
+
+ 1. Replace i with j in
+
+ for (j = 0; i < NUM_MD5_BYTES; ++j)
+
+ 2. Pass -W to readelf to force CU: in output due to:
+
+ if (do_wide || strlen (directory) < 76)
+ printf (_("CU: %s/%s:\n"), directory, file_table[0].name);
+ else
+ printf ("%s:\n", file_table[0].name);
+
+ PR gas/28629
+ * dwarf2dbg.c (out_dir_and_file_list): Fix a typo in commit
+ 4780e5e4933.
+ * testsuite/gas/elf/dwarf-5-nop-for-line-table.d: Pass -W to
+ readelf.
+
+2021-11-26 Mike Frysinger <vapier@gentoo.org>
+
+ sim: testsuite: replace global_as_options with ASFLAGS_FOR_TARGET
+ Only a few tests actually use global_as_options, but we can replace the
+ sim-specific settings with the dejagnu common ASFLAGS_FOR_TARGET and get
+ the same result.
+
+2021-11-26 Tom de Vries <tdevries@suse.de>
+
+ [gdb/testsuite] Add gdb.base/include-main.exp
+ The test-case gdb.ada/dgopt.exp uses the -gnatD switch, in combination with
+ -gnatG.
+
+ This causes the source file $src/gdb/testsuite/gdb.ada/dgopt/x.adb to be
+ expanded into $build/gdb/testsuite/outputs/gdb.ada/dgopt/x.adb.dg, and the
+ debug information should refer to the x.adb.dg file.
+
+ That is the case for the .debug_line part:
+ ...
+ The Directory Table is empty.
+
+ The File Name Table (offset 0x1c):
+ Entry Dir Time Size Name
+ 1 0 0 0 x.adb.dg
+ ...
+ but not for the .debug_info part:
+ ...
+ <11> DW_AT_name : $src/gdb/testsuite/gdb.ada/dgopt/x.adb
+ <15> DW_AT_comp_dir : $build/gdb/testsuite/outputs/gdb.ada/dgopt
+ ...
+
+ Filed as PR gcc/103436.
+
+ In C we can generate similar debug information, using a source file that does
+ not contain any code, but includes another one that does:
+ ...
+ $ cat gdb/testsuite/gdb.base/include-main.c
+ #include "main.c"
+ ...
+ such that in the .debug_line part we have:
+ ...
+ The Directory Table (offset 0x1c):
+ 1 /home/vries/gdb_versions/devel/src/gdb/testsuite/gdb.base
+
+ The File Name Table (offset 0x57):
+ Entry Dir Time Size Name
+ 1 1 0 0 main.c
+ ...
+ and in the .debug_info part:
+ ...
+ <11> DW_AT_name : $src/gdb/testsuite/gdb.base/include-main.c
+ <15> DW_AT_comp_dir : $build/gdb/testsuite
+ ...
+
+ Add a C test-case that mimics gdb.ada/dgopt.exp, that is:
+ - generate debug info as described above,
+ - issue a list of a line in include-main.c, while the corresponding
+ CU is not expanded yet.
+
+ Tested on x86_64-linux.
+
+2021-11-26 Mike Frysinger <vapier@gentoo.org>
+
+ sim: testsuite: drop unused global_cc_options
+ Nothing in the testsuite is using this setting, so let's drop it.
+ Any code that wants to set compiler flags can use CFLAGS_FOR_TARGET
+ instead to get the same effect.
+
+ sim: testsuite: punt unused toolchain variables
+ These haven't been used in over 20 years. The sim testsuite used to
+ run these tools itself directly, but back in ~1999 it switched to the
+ dejagnu helpers (e.g. target_assemble & target_link), and the dejagnu
+ logic only utilizes XXX_FOR_TARGET variables. Punt them here to avoid
+ confusion with dead code.
+
+2021-11-26 Andrew Burgess <aburgess@redhat.com>
+ Simon Cook <simon.cook@embecosm.com>
+
+ gdb: add risc-v disassembler options support
+ This commit adds support for RISC-V disassembler options to GDB. This
+ commit is based on this patch which was never committed:
+
+ https://sourceware.org/pipermail/binutils/2021-January/114944.html
+
+ All of the binutils refactoring has been moved to a separate, earlier,
+ commit, so this commit is pretty straight forward, just registering
+ the required gdbarch hooks.
+
+2021-11-26 Andrew Burgess <aburgess@redhat.com>
+ Simon Cook <simon.cook@embecosm.com>
+
+ opcodes/riscv: add disassembler options support to libopcodes
+ In preparation for the next commit, which will add GDB support for
+ RISC-V disassembler options, this commit restructures how the
+ disassembler options are managed within libopcodes.
+
+ The implementation provided here is based on this mailing list patch
+ which was never committed:
+
+ https://sourceware.org/pipermail/binutils/2021-January/114944.html
+
+ which in turn took inspiration from the MIPS implementation of the
+ same feature.
+
+ The biggest changes from the original mailing list post are:
+
+ 1. The GDB changes have been split into a separate patch, and
+
+ 2. The `riscv_option_args_privspec` variable, which held the valid
+ priv-spec values is now gone, instead we use the `riscv_priv_specs`
+ array from bfd/cpu-riscv.c instead.
+
+
+ include/ChangeLog:
+
+ * dis-asm.h (disassembler_options_riscv): Declare.
+
+ opcodes/ChangeLog:
+
+ * riscv-dis.c (enum riscv_option_arg_t): New enum typedef.
+ (riscv_options): New static global.
+ (disassembler_options_riscv): New function.
+ (print_riscv_disassembler_options): Rewrite to use
+ disassembler_options_riscv.
+
+2021-11-26 Tom de Vries <tdevries@suse.de>
+
+ [gas] Fix file 0 dir with -gdwarf-5
+ In out_dir_and_file_list, if file 0 is copied from file 1, only the filename
+ is copied, and the dir and md5 fields are left to their default values.
+
+ Fix this by adding the copy of the dir and md5 fields.
+
+ gas/ChangeLog:
+
+ 2021-11-26 Tom de Vries <tdevries@suse.de>
+
+ PR 28629
+ * dwarf2dbg.c (out_dir_and_file_list): When copying file 1 to file 0,
+ also copy dir and md5 fields.
+ * testsuite/gas/i386/dwarf5-line-4.d: Adjust expected output.
+
+2021-11-26 Mike Frysinger <vapier@gentoo.org>
+
+ sim: mips: avoid _ namespace
+ Some C libraries export _P symbols in their headers (like older
+ newlib and its ctype.h), so use P_ instead to avoid conflicts.
+
+ ld: fix POSIX shell test usage
+ POSIX test uses = for compares, not == which is a bashism.
+
+ gas: enable silent build rules
+
+ ld: fix --disable-multiple-abs-defs alignment in help
+
+2021-11-26 GDB Administrator <gdbadmin@sourceware.org>
+
+ Automatic date update in version.in
+
+2021-11-25 Enze Li <lienze2010@hotmail.com>
+
+ gdb: ensure extension_language_python is always defined
+ In this commit:
+
+ commit c6a6aad52d9e839d6a84ac31cabe2b7e1a2a31a0
+ Date: Mon Oct 25 17:25:45 2021 +0100
+
+ gdb/python: make some global variables static
+
+ building without Python was broken. The extension_language_python
+ global was moved from being always defined, to only being defined when
+ the HAVE_PYTHON macro was defined. As a consequence, building without
+ Python support would result in errors like:
+
+ /usr/bin/ld: extension.o:(.rodata+0x120): undefined reference to `extension_language_python'
+
+ This commit fixes the problem by moving the definition of
+ extension_language_python outside of the HAVE_PYTHON macro protection.
+
+2021-11-25 Andrew Burgess <aburgess@redhat.com>
+
+ Revert "gdb: add assert in remote_target::wait relating to async being off"
+ This commit introduced a test failure in gdb.server/attach-flag.exp.
+ I didn't spot this failure originally as the problem is fixed by this,
+ as yet unpushed patch:
+
+ https://sourceware.org/pipermail/gdb-patches/2021-November/183768.html
+
+ I unfortunately didn't test each patch in the original series
+ independently. I'll repost this patch after the above patch has been
+ merged.
+
+ This reverts commit 32b1f5e8d6b8ddd3be6e471c26dd85a1dac31dda.
+
+2021-11-25 Nick Clifton <nickc@redhat.com>
+
+ Fix building the AArch64 assembler and disassembler when assertions are disabled.
+ PR 28614
+ * aarch64-asm.c: Replace assert(0) with real code.
+ * aarch64-dis.c: Likewise.
+ * aarch64-opc.c: Likewise.
+
+2021-11-25 Bruno Larsen <blarsen@redhat.com>
+
+ PR gdb/28480: Improve ambiguous member detection
+ Basic ambiguity detection assumes that when 2 fields with the same name
+ have the same byte offset, it must be an unambiguous request. This is not
+ always correct. Consider the following code:
+
+ class empty { };
+
+ class A {
+ public:
+ [[no_unique_address]] empty e;
+ };
+
+ class B {
+ public:
+ int e;
+ };
+
+ class C: public A, public B { };
+
+ if we tried to use c.e in code, the compiler would warn of an ambiguity,
+ however, since A::e does not demand an unique address, it gets the same
+ address (and thus byte offset) of the members, making A::e and B::e have the
+ same address. however, "print c.e" would fail to report the ambiguity,
+ and would instead print it as an empty class (first path found).
+
+ The new code solves this by checking for other found_fields that have
+ different m_struct_path.back() (final class that the member was found
+ in), despite having the same byte offset.
+
+ The testcase gdb.cp/ambiguous.exp was also changed to test for this
+ behavior.
+
+2021-11-25 Jan W. Jagersma <jwjagersma@gmail.com>
+
+ coff-go32: consistent 16-byte section alignment
+ Section alignment for coff-go32 is inconsistent - The '.text' and
+ '.data' sections are 16-byte aligned, but named sections '.text.*' and
+ '.data.*' are only 4-byte aligned. '.gnu.linkonce.r.*' is aligned to
+ 16 bytes, yet '.rodata' and '.rodata.*' are aligned to 4 bytes. For
+ '.bss' all input sections are only aligned to 4 bytes.
+
+ This primarily can cause trouble when using SSE instructions, which
+ require their memory operands to be aligned to 16-byte boundaries.
+
+ This patch solves the issue simply by setting the section alignment
+ to 16 bytes, for all code and data sections referenced in the default
+ linker script.
+
+ * coff-go32.c (COFF_SECTION_ALIGNMENT_ENTRIES): Use partial
+ name match for .text, .data. Add entries for .const, .rodata,
+ .bss, .gnu.linkonce.b.
+
+2021-11-25 Alan Modra <amodra@gmail.com>
+
+ Re: AArch64: Add support for AArch64 EFI (efi-*-aarch64)
+ Commit b69c9d41e8 edited bfd/Makefile.in rather than using automake,
+ which meant a typo in Makefile.am was not discovered and other
+ differences in Makefile.in are seen with a proper regeneration. One
+ difference was lack of an empty line between the pe-aarch64igen.c rule
+ and the following $(BFD32_LIBS) etc. dependency rule, in the
+ regenerated file. Not that it matters for proper "make" behaviour,
+ but it's nicer with a line between those rules. Moving the rule
+ earlier seems to cure the missing empty line.
+
+ * Makefile.am (BFD64_BACKENDS): Correct typo.
+ (BFD_H_DEPS, LOCAL_H_DEPS): Move earlier. Move rule using these
+ deps earlier too.
+ * Makefile.in: Regenerate.
+ * po/BLD-POTFILES.in: Regenerate.
+ * po/SRC-POTFILES.in: Regenerate.
+
+2021-11-25 Nick Clifton <nickc@redhat.com>
+
+ Updated French translation for the opcodes directory.
+ * po/fr.po; Updated French translation.
+
+2021-11-25 Andrew Burgess <aburgess@redhat.com>
+
+ gdb: rename source_styling_changed observer
+ In a later commit I plan to add disassembler styling. In the same way
+ that we have a source_styling_changed observer I would need to add a
+ disassembler_styling_changed observer.
+
+ However, currently, these observers would only be notified from
+ cli-style.c:set_style_enabled, and observed in tui-winsource.c,
+ tui_source_window::style_changed, as a result, having two observers
+ seems unnecessary right now, so, in this commit, I plan to rename
+ source_styling_changed to just styling_changed, then, in the later
+ commit, when disassembler styling is added, I can use the same
+ observer for both source styling, and disassembler styling.
+
+ There should be no user visible changes after this commit.
+
+2021-11-25 Andrew Burgess <andrew.burgess@embecosm.com>
+
+ gdb/python: make some global variables static
+ Make a couple of global variables static in python/python.c. To do
+ this I had to move the definition of extension_language_python to
+ later in the file.
+
+ There should be no user visible changes after this commit.
+
+2021-11-25 Andrew Burgess <aburgess@redhat.com>
+
+ gdb: add assert in remote_target::wait relating to async being off
+ While working on another patch I ended up in a situation where I had
+ async mode disabled (with 'maint set target-async off'), but the async
+ event token got marked anyway.
+
+ In this situation GDB was continually calling into
+ remote_target::wait, however, the async token would never become
+ unmarked as the unmarking is guarded by target_is_async_p.
+
+ We could just unconditionally unmark the token, but that would feel
+ like just ignoring a bug, so, instead, lets assert that if
+ !target_is_async_p, then the async token should not be marked.
+
+ This assertion would have caught my earlier mistake.
+
+ There should be no user visible changes with this commit.
+
+2021-11-25 Andrew Burgess <aburgess@redhat.com>
+
+ gdb: simplify remote_target::is_async_p
+ This commit simplifies remote_target::is_async_p by removing the
+ target_async_permitted check.
+
+ In previous commits I have added additional assertions around the
+ target_async_permitted flag into target.c, as a result we should now
+ be confident that if target_can_async_p returns false, a target will
+ never have async mode enabled. Given this, it should not be necessary
+ to check target_async_permitted in remote_target::is_async_p, if this
+ flag is false ::is_async_p should return false anyway. There is an
+ assert to this effect in target_is_async_p.
+
+ There should be no user visible change after this commit.
+
+2021-11-25 Andrew Burgess <aburgess@redhat.com>
+
+ gdb: add asserts in target.c for target_async_permitted
+ The target_async_permitted flag allows a user to override whether a
+ target can act in async mode or not. In previous commits I have moved
+ the checking of this flag out of the various ::can_async_p methods and
+ into the common target.c code.
+
+ In this commit I will add some additional assertions into
+ target_is_async_p and target_async. The rules these assertions are
+ checking are:
+
+ 1. A target that returns false for target_can_async_p should never
+ become "async enabled", and so ::is_async_p should always return
+ false. This is being checked in target_is_async_p.
+
+ 2. GDB should never try to enable async mode for a target that
+ returns false for target_can_async_p, this is checked in
+ target_async.
+
+ There are a few places where we call the ::is_async_p method directly,
+ in these cases we will obviously not pass through the assert in
+ target_is_async_p, however, there are also plenty of places where we
+ do call target_is_async_p so if GDB starts to misbehave we should
+ catch it quickly enough.
+
+ There should be no user visible changes after this commit.
+
+2021-11-25 Andrew Burgess <aburgess@redhat.com>
+
+ gdb: hoist target_async_permitted checks into target.c
+ This commit moves the target_async_permitted check out of each targets
+ ::can_async_p method and into the target_can_async_p wrapper function.
+
+ I've left some asserts in the two ::can_async_p methods that I
+ changed, which will hopefully catch any direct calls to these methods
+ that might be added in the future.
+
+ There should be no user visible changes after this commit.
+
+2021-11-25 Andrew Burgess <aburgess@redhat.com>
+
+ gdb: introduce a new overload of target_can_async_p
+ There are a few places where we call the target_ops::can_async_p
+ member function directly, instead of using the target_can_async_p
+ wrapper.
+
+ In some of these places this is because we need to ask before the
+ target has been pushed, and in another location (in target.c) it seems
+ unnecessary to go through the wrapper when we are already in target.c
+ code.
+
+ However, in the next commit I'd like to hoist some common checks out
+ of target specific code into target.c. To achieve this, in this
+ commit, I introduce a new overload of target_can_async_p which takes a
+ target_ops pointer, and calls the ::can_async_p method directly. I
+ then make use of the new overload where appropriate.
+
+ There should be no user visible changes after this commit.
+
+2021-11-25 Clément Chigot <clement.chigot@atos.net>
+
+ ld/testsuite/ld-elfvsb: correctly test "weak hidden symbol DSO last"
+ The test must be done with the shared object and not with the object
+ file which is already being tested above.
+
+ ld/
+ * testsuite/ld-elfvsb/elfvsb.exp: use .so file in "weak hidden
+ symbol DSO last"
+
+2021-11-25 Tom de Vries <tdevries@suse.de>
+
+ [gdb/cli] Add "set logging enabled", deprecate "set logging on/off"
+ Before commit 3b6acaee895 "Update more calls to add_prefix_cmd" we had the
+ following output for "show logging file":
+ ...
+ $ gdb -q -batch -ex "set trace-commands on" \
+ -ex "set logging off" \
+ -ex "show logging file" \
+ -ex "set logging on" \
+ -ex "show logging file"
+ +set logging off
+ +show logging file
+ Future logs will be written to gdb.txt.
+ +set logging on
+ +show logging file
+ Currently logging to "gdb.txt".
+ ...
+
+ After that commit we have instead:
+ ...
+ +set logging off
+ +show logging file
+ The current logfile is "gdb.txt".
+ +set logging on
+ +show logging file
+ The current logfile is "gdb.txt".
+ ...
+
+ Before the commit, whether logging is enabled or not can be deduced from the
+ output of the command. After the commit, the message is unified and it's no
+ longer clear whether logging is enabled or not.
+
+ Fix this by:
+ - adding a new command "show logging enabled"
+ - adding a corresponding new command "set logging enabled on/off"
+ - making the commands "set logging on/off" deprecated aliases of the
+ "set logging enabled on/off" command.
+
+ Update the docs and testsuite to use "set logging enabled". Mention the new
+ and deprecated commands in NEWS.
+
+ Tested on x86_64-linux.
+
+2021-11-25 Tom de Vries <tdevries@suse.de>
+
+ [gdb/cli] Fix typo in logging overwrite help text
+ Currently we have:
+ ...
+ $ gdb -q -batch -ex "help set logging overwrite"
+ Set whether logging overwrites or appends to the log file.
+ If set, logging overrides the log file.
+ ...
+
+ Fix overrides -> overwrites typo.
+
+2021-11-25 GDB Administrator <gdbadmin@sourceware.org>
+
+ Automatic date update in version.in
+
+2021-11-24 Simon Marchi <simon.marchi@efficios.com>
+
+ gdb: fix help doc for "set index-cache enabled"
+ When implementing this command, I put "help doc" as a placeholder for
+ the help string, and forgot to update it. Change it for a real help
+ string.
+
+ Change-Id: Id23c2142c5073dc570bd8a706e9ec6fa8c40eb09
+
+2021-11-24 Simon Marchi <simon.marchi@efficios.com>
+
+ Revert (part of) "gdb fix for catch-syscall.exp"
+ This reverts (par of) commit ab198279120fe7937c0970a8bb881922726678f9.
+ This commit changed what the test expects when catching the execve
+ syscall based on the behavior seen on a Linux PowerPC machine. That is,
+ we get an "entry" event, but no "return" event. This is not what we get
+ on Linux with other architectures, though, and it seems like a
+ PowerPC-specific bug.
+
+ Revert the part of the patch related to this, but not the other hunk.
+
+ Change-Id: I4248776e4299f10999487be96d4acd1b33639996
+
+2021-11-24 Nick Clifton <nickc@redhat.com>
+
+ Fix an illegal memory access parsing a corrupt sysroff file.
+ PR 28564
+ * sysdump.c (getCHARS): Check for an out of bounds read.
+
+2021-11-24 Andrew Burgess <aburgess@redhat.com>
+
+ gdb: fix crash when reading ECOFF debug information
+ In commit:
+
+ commit 633cf2548bcd3dafe297e21a1dd3574240280d48
+ Date: Wed May 9 15:42:28 2018 -0600
+
+ Remove cleanups from mdebugread.c
+
+ the following change was made in the function parse_partial_symbols in
+ mdebugread.c:
+
+ - fdr_to_pst = XCNEWVEC (struct pst_map, hdr->ifdMax + 1);
+ - old_chain = make_cleanup (xfree, fdr_to_pst);
+ + gdb::def_vector<struct pst_map> fdr_to_pst_holder (hdr->ifdMax + 1);
+ + fdr_to_pst = fdr_to_pst_holder.data ();
+
+ The problem with this change is that XCNEWVEC calls xcalloc, which in
+ turn calls calloc, and calloc zero initializes the allocated memory.
+ In contrast, the new line gdb::def_vector<struct pst_map> specifically
+ does not initialize the underlying memory.
+
+ This is a problem because, later on in this same function, we
+ increment the n_globals field within 'struct pst_map' objects stored
+ in the vector. The incrementing is now being done from an
+ uninitialized starting point.
+
+ In this commit we switch from using gdb::def_vector to using
+ std::vector, this alone should be enough to ensure that the fields are
+ initialized to zero.
+
+ However, for extra clarity, I have also added initial values in the
+ 'struct pst_map' to make it crystal clear how the struct will start
+ up.
+
+ This issue was reported on the mailing list here:
+
+ https://sourceware.org/pipermail/gdb-patches/2021-November/183693.html
+
+ Co-Authored-By: Lightning <lightningth@gmail.com>
+
+2021-11-24 GDB Administrator <gdbadmin@sourceware.org>
+
+ Automatic date update in version.in
+
+2021-11-23 Alexandra Hájková <ahajkova@redhat.com>
+
+ configure.ac: Check for the readline.h explicitly
+ When readline development package is missing make fails with
+ "configure: error: system readline is not new enough" which
+ might be confusing. This patch checks for the readline.h explicitly
+ and makes make to warn about the missing package.
+
+2021-11-23 Tamar Christina <tamar.christina@arm.com>
+
+ AArch64: Add support for AArch64 EFI (efi-*-aarch64).
+ This adds support for efi-*-aarch64 by virtue of adding a new PEI target
+ pei-aarch64-little. This is not a full target and only exists to support EFI
+ at this time.
+
+ This means that this target does not support relocation processing and is mostly
+ a container format. This format has been added to elf based aarch64 targets
+ such that efi images can be made natively on Linux.
+
+ However this target is not valid for use with gas but only with objcopy.
+
+ With these changes the resulting file is recognized as an efi image by
+ third party tools:
+
+ > pecli info hello.efi
+
+ Metadata
+ ================================================================================
+ MD5: 598c32a778b0f0deebe977fef8578c4e
+ SHA1: 4580121edd5cb4dc40f51b28f171fd15250df84c
+ SHA256: 3154bd7cf42433d1c957f6bf55a17ad8c57ed41b29df2d485703349fd6ff1d5c
+ Imphash:
+ Size: 47561 bytes
+ Type: PE32+ executable (EFI application) (stripped to external PDB), for MS Windows
+ Compile Time: 1970-01-01 00:00:00 (UTC - 0x0 )
+ Entry point: 0x2000 (section .text)
+
+ Sections
+ ================================================================================
+ Name RWX VirtSize VirtAddr RawAddr RawSize Entropy md5
+ .text R-X 0x5bb0 0x2000 0x400 0x5c00 6.39 551fbc264256a3f387de8a891500ae0d
+ .reloc R-- 0xc 0x8000 0x6000 0x200 0.02 0c45f6d812d079821c1d54c09ab89e1d
+ .data RW- 0x1d88 0x9000 0x6200 0x1e00 4.18 5d1137c09f01289dc62bf754f7290db3
+ .dynamic RW- 0xf0 0xb000 0x8000 0x200 0.34 5c94ed3206f05a277e6f04fbf131f131
+ .rela R-- 0xe58 0xc000 0x8200 0x1000 1.87 8b5c6bc30f3acb7ca7bf2e6789d68519
+ .dynsym R-- 0x138 0xd000 0x9200 0x200 0.96 bdcf5101da51aadc663ca8859f88138c
+
+ Imports
+ ================================================================================
+
+ Any magic number is based on the Microsoft PE specification [1].
+
+ [1] https://docs.microsoft.com/en-us/windows/win32/debug/pe-format
+
+ bfd/ChangeLog:
+
+ 2021-10-21 Tamar Christina <tamar.christina@arm.com>
+
+ PR binutils/26206
+ * .gitignore (pe-aarch64igen.c): New.
+ * Makefile.am (pei-aarch64.lo, pe-aarch64igen.lo, pei-aarch64.c,
+ pe-aarch64igen.c): Add support.
+ * Makefile.in: Likewise.
+ * bfd.c (bfd_get_sign_extend_vma): Add pei-aarch64-little.
+ * coff-aarch64.c: New file.
+ * coffcode.h (coff_set_arch_mach_hook, coff_set_flags,
+ coff_write_object_contents) Add aarch64 (aarch64_pei_vec) support.
+ * config.bfd: Likewise.
+ * configure: Likewise.
+ * configure.ac: Likewise.
+ * libpei.h (GET_OPTHDR_IMAGE_BASE, PUT_OPTHDR_IMAGE_BASE,
+ GET_OPTHDR_SIZE_OF_STACK_RESERVE, PUT_OPTHDR_SIZE_OF_STACK_RESERVE,
+ GET_OPTHDR_SIZE_OF_STACK_COMMIT, PUT_OPTHDR_SIZE_OF_STACK_COMMIT,
+ GET_OPTHDR_SIZE_OF_HEAP_RESERVE, PUT_OPTHDR_SIZE_OF_HEAP_RESERVE,
+ GET_OPTHDR_SIZE_OF_HEAP_COMMIT, PUT_OPTHDR_SIZE_OF_HEAP_COMMIT,
+ GET_PDATA_ENTRY, _bfd_peAArch64_bfd_copy_private_bfd_data_common,
+ _bfd_peAArch64_bfd_copy_private_section_data,
+ _bfd_peAArch64_get_symbol_info, _bfd_peAArch64_only_swap_filehdr_out,
+ _bfd_peAArch64_print_private_bfd_data_common,
+ _bfd_peAArch64i_final_link_postscript,
+ _bfd_peAArch64i_only_swap_filehdr_out, _bfd_peAArch64i_swap_aouthdr_in,
+ _bfd_peAArch64i_swap_aouthdr_out, _bfd_peAArch64i_swap_aux_in,
+ _bfd_peAArch64i_swap_aux_out, _bfd_peAArch64i_swap_lineno_in,
+ _bfd_peAArch64i_swap_lineno_out, _bfd_peAArch64i_swap_scnhdr_out,
+ _bfd_peAArch64i_swap_sym_in, _bfd_peAArch64i_swap_sym_out,
+ _bfd_peAArch64i_swap_debugdir_in, _bfd_peAArch64i_swap_debugdir_out,
+ _bfd_peAArch64i_write_codeview_record,
+ _bfd_peAArch64i_slurp_codeview_record,
+ _bfd_peAArch64_print_ce_compressed_pdata): New.
+ * peXXigen.c (_bfd_XXi_swap_aouthdr_in, _bfd_XXi_swap_aouthdr_out,
+ pe_print_pdata, _bfd_XX_print_private_bfd_data_common,
+ _bfd_XX_bfd_copy_private_section_data, _bfd_XXi_final_link_postscript):
+ Support COFF_WITH_peAArch64,
+ * pei-aarch64.c: New file.
+ * peicode.h (coff_swap_scnhdr_in, pe_ILF_build_a_bfd, pe_ILF_object_p):
+ Support COFF_WITH_peAArch64.
+ (jtab): Add dummy entry that traps.
+ * targets.c (aarch64_pei_vec): New.
+
+ binutils/ChangeLog:
+
+ 2021-10-21 Tamar Christina <tamar.christina@arm.com>
+
+ PR binutils/26206
+ * NEWS: Add new support.
+ * objcopy.c (convert_efi_target): Add efi-*-aarch64 support.
+ * testsuite/binutils-all/aarch64/pei-aarch64-little.d: New test.
+ * testsuite/binutils-all/aarch64/pei-aarch64-little.s: New test.
+
+ include/ChangeLog:
+
+ 2021-10-21 Tamar Christina <tamar.christina@arm.com>
+
+ PR binutils/26206
+ * coff/aarch64.h: New file.
+ * coff/pe.h (IMAGE_FILE_MACHINE_ARM64): New.
+
+2021-11-23 Alan Modra <amodra@gmail.com>
+
+ binutils debuginfod test
+ A missing "return" resulted in this non-ELF fail:
+ x86_64-w64-mingw32 +FAIL: debuginfod (create separate debug info file)
+
+ Also, the debuginfod I have installed does not appear to handle
+ non-native ELF objects, so only run the test when native.
+
+ * testsuite/binutils-all/debuginfod.exp: Don't run test unless
+ native ELF.
+
+2021-11-23 Alan Modra <amodra@gmail.com>
+
+ Update bug reporting address
+ https://sourceware.org/bugzilla/ everywhere
+
+ bfd/
+ * configure.ac (ACX_BUGURL): Set to https://sourceware.org/bugzilla/
+ * po/Make-in (msgid-bugs-address): Likewise.
+ * README: Report bugs to the above.
+ * configure: Regenerate.
+ binutils/
+ * po/Make-in (msgid-bugs-address): Update.
+ gas/
+ * README: Update bug address. Delete mention of gcc.
+ * po/Make-in: Update bug address.
+ gold/
+ * po/Make-in: Update bug address.
+ gprof/
+ * po/Make-in: Update bug address.
+ ld/
+ * po/Make-in: Update bug address.
+ opcodes/
+ * po/Make-in: Update bug address.
+
+2021-11-23 Jan (janneke) Nieuwenhuizen <janneke@gnu.org>
+
+ gdb: more compile fixes for gnu-nat.c
+ This fixes compile errors like
+
+ ../../gdb-11.1/gdb/gnu-nat.c: In function void add_task_commands():
+ ../../gdb-11.1/gdb/gnu-nat.c:3204:17: error: no matching function for call to add_cmd(const char [8], command_class, cmd_list_element*&, char*, cmd_list_element**)
+ 3204 | &setlist);
+ | ^
+ In file included from ../../gdb-11.1/gdb/completer.h:21,
+ from ../../gdb-11.1/gdb/symtab.h:36,
+ from ../../gdb-11.1/gdb/infrun.h:21,
+ from ../../gdb-11.1/gdb/target.h:42,
+ from ../../gdb-11.1/gdb/inf-child.h:23,
+ from ../../gdb-11.1/gdb/gnu-nat.h:38,
+ from ../../gdb-11.1/gdb/gnu-nat.c:24:
+ ../../gdb-11.1/gdb/command.h:160:33: note: candidate: cmd_list_element* add_cmd(const char*, command_class, void (*)(const char*, int), const char*, cmd_list_element**)
+ 160 | extern struct cmd_list_element *add_cmd (const char *, enum command_class,
+ | ^~~~~~~
+ ../../gdb-11.1/gdb/command.h:161:30: note: no known conversion for argument 3 from cmd_list_element* to void (*)(const char*, int)
+ 161 | cmd_const_cfunc_ftype *fun,
+ | ~~~~~~~~~~~~~~~~~~~~~~~^~~
+ ../../gdb-11.1/gdb/command.h:167:33: note: candidate: cmd_list_element* add_cmd(const char*, command_class, const char*, cmd_list_element**)
+ 167 | extern struct cmd_list_element *add_cmd (const char *, enum command_class,
+ | ^~~~~~~
+ ../../gdb-11.1/gdb/command.h:167:33: note: candidate expects 4 arguments, 5 provided
+ ../../gdb-11.1/gdb/gnu-nat.c:3210:18: error: no matching function for call to add_cmd(const char [8], command_class, cmd_list_element*&, char*, cmd_list_element**)
+ 3210 | &showlist);
+ | ^
+
+ Change-Id: Ie9029363d3fb40e34e8f5b1ab503745bc44bfe3f
+
+2021-11-23 Andrea Monaco <andrea.monaco@autistici.org>
+
+ gnu-nat.c: fix calls to add_info_alias
+ Some time ago add_info_alias was changed (commit
+ e0f25bd9717c7973197095523db7c1cdc956cea2). These calls were not updated
+ and caused errors on compilation.
+
+ Change-Id: I354ae4e8b8926d785abc94ec7142471ffd76d2de
+
+2021-11-23 GDB Administrator <gdbadmin@sourceware.org>
+
+ Automatic date update in version.in
+
+2021-11-22 Simon Marchi <simon.marchi@efficios.com>
+
+ gdb: pass more const target_waitstatus by reference
+ While working on target_waitstatus changes, I noticed a few places where
+ const target_waitstatus objects could be passed by reference instead of
+ by pointers. And in some cases, places where a target_waitstatus could
+ be passed as const, but was not. Convert them as much as possible.
+
+ Change-Id: Ied552d464be5d5b87489913b95f9720a5ad50c5a
+
+2021-11-22 Simon Marchi <simon.marchi@efficios.com>
+
+ gdb: introduce target_waitkind_str, use it in target_waitstatus::to_string
+ I would like to print target_waitkind values in debug messages, so I
+ think that a target_waitkind-to-string function would be useful. While
+ at it, use it in target_waitstatus::to_string. This changes the output
+ of target_waitstatus::to_string a bit, but I think it is for the better.
+ The debug messages will show a string matching exactly the
+ target_waitkind enumerator (minus the TARGET_WAITKIND prefix).
+
+ As a convenience, make string_appendf return the same reference to
+ string it got as a parameter. This allows doing this:
+
+ return string_appendf (str, "foo");
+
+ ... keeping the code concise.
+
+ Change-Id: I383dffc9c78614e7d0668b1516073905e798eef7
+
+2021-11-22 Simon Marchi <simon.marchi@efficios.com>
+
+ gdb: rename target_waitstatus_to_string to target_waitstatus::to_string
+ Make target_waitstatus_to_string a "to_string" method of
+ target_waitstatus, a bit like we have ptid_t::to_string already. This
+ will save a bit of typing.
+
+ Change-Id: Id261b7a09fa9fa3c738abac131c191a6f9c13905
+
+2021-11-22 Nelson Chu <nelson.chu@sifive.com>
+
+ RISC-V: Removed the redundant NULL pointer check in the riscv_update_subset.
+ If we always use the .option arch to call the riscv_update_subset, then
+ it is almost impossible that the input string will be NULL. Therefore,
+ just remove the redundant NULL pointer check in the riscv_update_subset.
+
+ bfd/
+ * elfxx-riscv.c (riscv_update_subset): Removed the redundant NULL
+ pointer check.
+
+2021-11-22 Nelson Chu <nelson.chu@sifive.com>
+
+ RISC-V: Replace .option rvc/norvc with .option arch, +c/-c.
+ Since the .option rvc/norvc directives are obsolete, replace them with
+ the new proposed diretives: .option arch, +c/-c. And also reset the
+ riscv_opts.rvc flag for the .option arch directives.
+
+ gas/
+ * config/tc-riscv.c (s_riscv_option): Reset the riscv_opts.rvc
+ for the .option arch directives.
+ * testsuite/gas/riscv/align-1.s: Replace the obsolete .option
+ rvc/norvc with .option arch, +c/-c.
+ * testsuite/gas/riscv/c-add-addi.s: Likewise.
+ * testsuite/gas/riscv/c-nonzero-imm.s: Likewise.
+ * testsuite/gas/riscv/c-nonzero-reg.s: Likewise.
+ * testsuite/gas/riscv/c-zero-imm-64.s: Likewise.
+ * testsuite/gas/riscv/c-zero-imm.s: Likewise.
+ * testsuite/gas/riscv/c-zero-reg.s: Likewise.
+ * testsuite/gas/riscv/ext.s: Likewise.
+ * testsuite/gas/riscv/mapping-01.s: Likewise.
+ * testsuite/gas/riscv/mapping-02.s: Likewise.
+ * testsuite/gas/riscv/mapping-03.s: Likewise.
+ * testsuite/gas/riscv/mapping-04.s: Likewise.
+ * testsuite/gas/riscv/no-relax-align-2.s: Likewise.
+ * testsuite/gas/riscv/shamt-32.s: Likewise.
+ * testsuite/gas/riscv/shamt-64.s: Likewise.
+
+2021-11-22 Tom de Vries <tdevries@suse.de>
+
+ [gdb/build] Fix x86_64 x32 build
+ A build error on x86_64 with x32 abi was reported here (
+ https://sourceware.org/pipermail/gdb/2021-November/049787.html ):
+ ...
+ gdb/nat/amd64-linux-siginfo.c:280:42: error: \
+ 'struct compat_x32_siginfo_t::<unnamed union>::<unnamed>' has no member \
+ named 'si_addr_bnd'
+ 280 | #define cpt_si_lower _sifields._sigfault.si_addr_bnd._lower
+ | ^~~~~~~~~~~
+ gdb/nat/amd64-linux-siginfo.c:337:38: note: in expansion of macro 'cpt_si_lower'
+ 337 | to->cpt_si_lower = from_ptrace.cpt_si_lower;
+ | ^~~~~~~~~~~~
+ ...
+
+ The problem is that code added in commit d3d7d1ba3bb "[gdb/tdep] Handle
+ si_addr_bnd in compat_siginfo_from_siginfo" doesn't compile on an x86_64 x32
+ setup, because compat_x32_siginfo_t doesn't have the si_addr_bnd fields.
+
+ Fix this conservatively by disabling the code for x32.
+
+ Tested on x86_64-linux.
+
+2021-11-22 Nelson Chu <nelson.chu@sifive.com>
+
+ RISC-V: PR28610, Fix ASAN heap-buffer-overflow error in riscv_update_subset.
+ The architecture parser in riscv_update_subset shouldn't check (or access)
+ the pointer space which doesn't exist.
+
+ bfd/
+ pr 28610
+ * elfxx-riscv.c (riscv_update_subset): The architecture parser
+ shouldn't access the pointer space which doesn't exist.
+
+2021-11-22 Tom de Vries <tdevries@suse.de>
+
+ [gdb/symtab] Support .debug_line with DW_FORM_line_strp
+ I noticed a new gcc option -gdwarf64 and tried it out (using gcc 11.2.1).
+
+ With a test-case hello.c:
+ ...
+ int
+ main (void)
+ {
+ printf ("hello\n");
+ return 0;
+ }
+ ...
+ compiled like this:
+ ...
+ $ gcc -g -gdwarf64 ~/hello.c
+ ...
+ I ran into:
+ ...
+ $ gdb -q -batch a.out
+ DW_FORM_line_strp pointing outside of .debug_line_str section \
+ [in module a.out]
+ ...
+
+ Debugging gdb revealed that the string offset is:
+ ...
+ (gdb) up
+ objfile=0x182ab70, str_offset=1378684502312,
+ form_name=0xeae9b5 "DW_FORM_line_strp")
+ at src/gdb/dwarf2/section.c:208
+ 208 error (_("%s pointing outside of %s section [in module %s]"),
+ (gdb) p /x str_offset
+ $1 = 0x14100000128
+ (gdb)
+ ...
+ which is read when parsing a .debug_line entry at 0x1e0.
+
+ Looking with readelf at the 0x1e0 entry, we have:
+ ...
+ The Directory Table (offset 0x202, lines 2, columns 1):
+ Entry Name
+ 0 (indirect line string, offset: 0x128): /data/gdb_versions/devel
+ 1 (indirect line string, offset: 0x141): /home/vries
+ ...
+ which in a hexdump looks like:
+ ...
+ 0x00000200 1f022801 00004101 00000201 1f020f02
+ ...
+
+ What happens is the following:
+ - readelf interprets the DW_FORM_line_strp reference to .debug_line_str as
+ a 4 byte value, and sees entries 0x00000128 and 0x00000141.
+ - gdb instead interprets it as an 8 byte value, and sees as first entry
+ 0x0000014100000128, which is too big so it bails out.
+
+ AFAIU, gdb is wrong. It assumes DW_FORM_line_strp is 8 bytes on the basis
+ that the corresponding CU is 64-bit DWARF. However, the .debug_line
+ contribution has it's own initial_length field, and encodes there that it's
+ 32-bit DWARF.
+
+ Fix this by using the correct offset size for DW_FORM_line_strp references
+ in .debug_line.
+
+ Note: the described test-case does trigger this complaint (both with and
+ without this patch):
+ ...
+ $ gdb -q -batch -iex "set complaints 10" a.out
+ During symbol reading: intermixed 32-bit and 64-bit DWARF sections
+ ...
+
+ The reason that the CU has 64-bit dwarf is because -gdwarf64 was passed to
+ gcc. The reason that the .debug_line entry has 32-bit dwarf is because that's
+ what gas generates. Perhaps this is complaint-worthy, but I don't think it
+ is wrong.
+
+ Tested on x86_64-linux, using native and target board dwarf64.exp.
+
+2021-11-22 Tom de Vries <tdevries@suse.de>
+
+ [gdb/testsuite] Add target board dwarf64.exp
+ Add a new target board dwarf64.exp, that runs test with -gdwarf64.
+
+ Tested on x86_64-linux.
+
+2021-11-22 Tom de Vries <tdevries@suse.de>
+
+ [gdb/testsuite] Support .debug_line v5 in dwarf assembler
+ The v5 section version for .debug_line has:
+ - two new fields address_size and segment_selector_size
+ - a different way to encode the directory and filename tables.
+
+ Add support for this in the dwarf assembler.
+
+ For now, make the v5 directory and filename tables work with the v4 type of
+ specification in the test-cases by adding duplicate entries at position 0.
+
+ This will need to be properly fixed with an intrusive fix that changes how
+ directory and filename entries are specified in the test-cases, f.i:
+ ...
+ set diridx [include_dir "${srcdir}/${subdir}"]
+ set fileidx [file_name "$srcfile" $diridx]
+ ...
+
+ Tested on x86_64-linux.
+
+2021-11-22 Tom de Vries <tdevries@suse.de>
+
+ [gdb/testsuite] Factor out _line_finalize_header
+ Rather than generate dwarf immediately in procs include_dir and file_name,
+ postpone generation and store the data in variables. Then handle the
+ generation in a new proc _line_finalize_header.
+
+ Tested on x86-64-linux.
+
+2021-11-22 Tom de Vries <tdevries@suse.de>
+
+ [gdb/testsuite] Support .debug_line v4 in dwarf assembler
+ The .debug_line header got a new field in v4:
+ maximum_operations_per_instruction.
+
+ Generate this field in the dwarf assembler, for now hardcoding the value to 1,
+ meaning non-VLIW.
+
+ Tested on x86_64-linux.
+
+2021-11-22 Tom de Vries <tdevries@suse.de>
+
+ [gdb/testsuite] Add test-case gdb.dwarf2/dw2-lines.exp
+ Add a new test-case gdb.dwarf2/dw2-lines.exp that tests various .debug_line
+ sections.
+
+ Tested on x86_64-linux.
+
+2021-11-22 Tom de Vries <tdevries@suse.de>
+
+ [gdb/testsuite] Speed up MACRO_AT_* calls
+ Currently, for each MACRO_AT_range or MACRO_AT_func in dwarf assembly the
+ following is done:
+ - $srcdir/$subdir/$srcfile is compiled to an executable using
+ flags "debug"
+ - a new gdb instance is started
+ - the new executable is loaded.
+
+ This is inefficient, because the executable is identical within the same
+ Dwarf::assemble call.
+
+ Share the gdb instance in the same Dwarf::assemble invocation, which speeds
+ up a make check with RUNTESTFLAGS like this to catch all dwarf assembly
+ test-cases:
+ ...
+ rtf=$(echo $(cd src/gdb/testsuite; find gdb.* -type f -name "*.exp" \
+ | xargs grep -l Dwarf::assemble))
+ ...
+ from:
+ ...
+ real 1m39.916s
+ user 1m25.668s
+ sys 0m21.377s
+ ...
+ to:
+ ...
+ real 1m29.512s
+ user 1m17.316s
+ sys 0m19.100s
+ ...
+
+ Tested on x86_64-linux.
+
+2021-11-22 GDB Administrator <gdbadmin@sourceware.org>
+
+ Automatic date update in version.in
+
+2021-11-21 Lancelot SIX <lsix@lancelotsix.com>
+
+ gdb/testsuite: Remove duplicates in gdb.base/catch-signal.exp
+ When running the testsuite I have the following:
+
+ Running .../gdb/testsuite/gdb.base/catch-signal.exp ...
+ DUPLICATE: gdb.base/catch-signal.exp: SIGHUP: continue
+ DUPLICATE: gdb.base/catch-signal.exp: SIGHUP: continue
+ DUPLICATE: gdb.base/catch-signal.exp: 1: continue
+ DUPLICATE: gdb.base/catch-signal.exp: 1: continue
+ DUPLICATE: gdb.base/catch-signal.exp: SIGHUP SIGUSR2: continue
+ DUPLICATE: gdb.base/catch-signal.exp: SIGHUP SIGUSR2: continue
+
+ This patch removes DUPLICATE in gdb.base/catch-signal.exp by explicitly
+ giving names to the offending 'gdb_test "continue"' statements to make
+ them distinct.
+
+ Tested on x86_64-linux.
+
+2021-11-21 Mike Frysinger <vapier@gentoo.org>
+
+ sim: v850: fix cpu_option testsuite handling
+ The v850 testsuite code has been testing the $opt variable, but this
+ was never actually set anywhere globally or v850-specific. Instead,
+ this was a random variable leaking out of the sh testsuite code. As
+ far as I can tell, it has always been this way. That means the code
+ only ever tested the v850 cpu target (which is the default).
+
+ This failure can be easily seen in practice by running the v850 code
+ in isolation and seeing it crash:
+ $ runtest v850/allinsns.exp
+ ...
+ Running target unix
+ Using /usr/share/dejagnu/baseboards/unix.exp as board description file for target.
+ Using /usr/share/dejagnu/config/unix.exp as generic interface file for target.
+ Using ../../../sim/testsuite/config/default.exp as tool-and-target-specific interface file.
+ WARNING: Assuming target board is the local machine (which is probably wrong).
+ You may need to set your DEJAGNU environment variable.
+ Running ../../../sim/testsuite/v850/allinsns.exp ...
+ ERROR: tcl error sourcing ../../../sim/testsuite/v850/allinsns.exp.
+ ERROR: tcl error code TCL LOOKUP VARNAME opt
+ ERROR: can't read "opt": no such variable
+ while executing
+ "switch -regexp -- $opt {
+
+ Backing up a bit, the reason for this logic in the first place is
+ because the common sim testsuite code makes an assumption about the
+ assembler options with cpu_option -- the option and its value are
+ always separated by an =. This is not the case with v850. So tweak
+ the core sim logic a bit to support omitting the = so that we can
+ switch v850 to the standard all_machs setting and avoid opt entirely.
+
+2021-11-21 GDB Administrator <gdbadmin@sourceware.org>
+
+ Automatic date update in version.in
+
+2021-11-20 Jeff Law <jeffreyalaw@gmail.com>
+
+ Fix intermittent failures on the H8, particularly H8/SX tests.
+ The upstream GCC tester has showed spurious execution failures on the
+ H8 target for the H8/SX multilibs. I suspected memory corruption or an
+ uninitialized variable early as the same binary would sometimes work and
+ sometimes it got the wrong result. Worse yet, the point where the test
+ determined it was getting the wrong result would change.
+
+ Because it only happened on the H8/SX variant I was able to zero in on
+ the "mova" support and the "short form" of those instructions in particular.
+
+ As the code stands it checks if code->op3.type == 0 to try and identify cases
+ where op3 wasn't filled in and thus we've got the short form of the mova
+ instruction.
+
+ But for the short-form of those instructions we never set any of the "op3"
+ data structure. We get whatever was lying around -- it's usually zero and
+ thus things usually work, but if the stale data was nonzero, then we'd
+ fail to recognize the instruction as a short-form and fail to set up the
+ various fields appropriately.
+
+ I initially initialized the op3.type field to zero, but didn't like that
+ because it was inconsistent with how other operands were initialized.
+ Bringing consistency meant using -1 as the initializer value and adjusting
+ the check for short form mova appropriately.
+
+ I've had this in the upstream GCC tester for perhaps a year at this point
+ and haven't seen any of the intermittent failures again.
+
+2021-11-20 Simon Marchi <simon.marchi@efficios.com>
+
+ gdbsupport: fix array-view compilation with c++11 && _GLIBCXX_DEBUG
+ When building with -std=c++11 and -D_GLIBCXX_DEBUG=1, we get some errors
+ like:
+
+ CXX unittests/array-view-selftests.o
+ In file included from /home/smarchi/src/binutils-gdb/gdb/utils.h:25,
+ from /home/smarchi/src/binutils-gdb/gdb/defs.h:630,
+ from /home/smarchi/src/binutils-gdb/gdb/unittests/array-view-selftests.c:20:
+ /home/smarchi/src/binutils-gdb/gdb/../gdbsupport/array-view.h: In instantiation of constexpr gdb::array_view<T> gdb::array_view<T>::slice(gdb::array_view<T>::size_type, gdb::array_view<T>::size_type) const [with T = unsigned char; gdb::array_view<T>::size_type = long unsigned int:
+ /home/smarchi/src/binutils-gdb/gdb/unittests/array-view-selftests.c:532:29: required from here
+ /home/smarchi/src/binutils-gdb/gdb/../gdbsupport/array-view.h:192:3: error: body of constexpr function constexpr gdb::array_view<T> gdb::array_view<T>::slice(gdb::array_view<T>::size_type, gdb::array_view<T>::size_type) const [with T = unsigned char; gdb::array_view<T>::size_type = long unsigned int not a return-statement
+ 192 | }
+ | ^
+
+ This is because constexpr functions in c++11 can only consist of a
+ single return statement, so we can't have the gdb_assert in there. Make
+ the gdb_assert presence conditional to the __cplusplus version, to
+ enable it only for c++14 and later.
+
+ Change-Id: I2ac33f7b4bd1765ddc3ac8d07445b16ac1f340f0
+
+2021-11-20 Tom de Vries <tdevries@suse.de>
+
+ [gdb/build] Check if libsource-highlight is usable
+ When building gdb with g++ 4.8.5, I ran into:
+ ...
+ ld: source-cache.o: in function `source_cache::ensure(symtab*)':
+ source-cache.c:207: undefined reference to \
+ srchilite::SourceHighlight::SourceHighlight(std::string const&)
+ ...
+
+ [ I configured gdb without explicit settings related to source-highlight, so
+ we're excercising the enable_source_highlight=auto scenario. ]
+
+ The problem is that:
+ - the source-highlight library is build with system compiler
+ g++ 7.5.0 which uses the new libstdc++ library abi (see
+ https://gcc.gnu.org/onlinedocs/libstdc++/manual/using_dual_abi.html )
+ - gdb is build using g++ 4.8.5 which uses the old abi.
+
+ [ There's a compatibility macro _GLIBCXX_USE_CXX11_ABI, but that doesn't work
+ for this case. Instead, it enables the opposite case where the
+ source-highlight library is build with g++ 4.8.5 and gdb is build with
+ g++ 7.5.0. ]
+
+ Fix this by checking whether the source-highlight library is usable during
+ configuration.
+
+ In the enable_source_highlight=auto scenario, this allows the build to skip
+ the unusable library and finish successfully.
+
+ In the enable_source_highlight=yes scenario, this allows the build to error
+ out earlier.
+
+ Tested on x86_64-linux.
+
+2021-11-20 Clément Chigot <clement.chigot@atos.net>
+
+ bfd: remove wrong comment in xcofflink.c
+ This comment was long time ago associated to the function
+ "xcoff_build_ldsyms" which have since been replaced by
+ "xcoff_build_ldsym".
+
+ * xcofflink.c: Remove wrong comment.
+
+2021-11-20 Mike Frysinger <vapier@gentoo.org>
+
+ sim: bfin: fix short --env usage in testsuite
+ Now that we have more than one option that matches "--env", the test
+ config here doesn't work. Use the explicit --environment.
+
+2021-11-20 GDB Administrator <gdbadmin@sourceware.org>
+
+ Automatic date update in version.in
+
+2021-11-19 H.J. Lu <hjl.tools@gmail.com>
+
+ elfedit: Align --[in|out]put-abiversion usage
+ Align
+
+ --input-abiversion [0-255] Set input ABIVERSION
+ --output-abiversion [0-255] Set output ABIVERSION
+
+ instead of
+
+ --input-abiversion [0-255]
+ Set input ABIVERSION
+ --output-abiversion [0-255]
+ Set output ABIVERSION
+
+ * elfedit.c (usage): Align --[in|out]put-abiversion usage.
+
+2021-11-19 Tom de Vries <tdevries@suse.de>
+
+ [gdb/testsuite] Handle runto fail in gdb.mi/mi-var-cp.exp
+ On OBS I ran into:
+ ...
+ PASS: gdb.mi/mi-var-cp.exp: run to mi-var-cp.cc:81 (set breakpoint)
+ UNRESOLVED: gdb.mi/mi-var-cp.exp: unable to start target
+ ...
+ followed by 81 FAILs and two more UNRESOLVEDs.
+
+ I didn't manage to reproduce this, but I did notice that the initial
+ problem causing the UNRESOLVED caused all subsequent UNRESOLVEDs and FAILs.
+
+ I emulated the problem by commenting out the send_gdb "run\n" in
+ mi_run_cmd_full.
+
+ Fix this by:
+ - handling mi_run_cmd failure in mi_get_inline_test
+ - handling mi_run_inline_test failure in gdb.mi/mi-var-cp.exp, and
+ other test-cases using mi_get_inline_test
+
+ Tested on x86_64-linux.
+
+2021-11-19 Tom de Vries <tdevries@suse.de>
+
+ [gdb/testsuite] Fix 64-bit dwarf test-cases with -m32
+ When running test-case gdb.dwarf2/loc-sec-offset.exp with target board -m32,
+ I run into:
+ ...
+ builtin_spawn -ignore SIGHUP gcc -fno-stack-protector -m32 \
+ -fdiagnostics-color=never -c -o loc-sec-offset-dw641.o \
+ loc-sec-offset-dw64.S^M
+ as: loc-sec-offset-dw641.o: unsupported relocation type: 0x1^M
+ loc-sec-offset-dw64.S: Assembler messages:^M
+ loc-sec-offset-dw64.S:29: Error: cannot represent relocation type \
+ BFD_RELOC_64^M
+ ...
+
+ Looking at line 29, we have:
+ ...
+ .8byte .Labbrev1_begin /* Abbrevs */
+ ...
+
+ It would be nice if the assembler could handle this somehow. But I guess
+ it's not unreasonable that an assembler for a 32-bit architecture will object
+ to handling 64-bit labels.
+
+ Instead, work around this in the dwarf assembler by emitting:
+ ...
+ .4byte .Labbrev1_begin /* Abbrevs (lsw) */
+ .4byte 0 /* Abbrevs (msw) */
+ ...
+
+ Tested on x86_64-linux with target board unix/-m32.
+
+ Bug: https://sourceware.org/bugzilla/show_bug.cgi?id=28383
+
+2021-11-19 Tom de Vries <tdevries@suse.de>
+
+ [gdb/testsuite] Fix gdb.threads/thread-specific-bp.exp
+ On OBS I ran into a failure in test-case gdb.threads/thread-specific-bp.exp:
+ ...
+ (gdb) PASS: gdb.threads/thread-specific-bp.exp: non-stop: continue to end
+ info breakpoint^M
+ Num Type Disp Enb Address What^M
+ 1 breakpoint keep y 0x0000555555555167 in main at $src:36^M
+ breakpoint already hit 1 time^M
+ 2 breakpoint keep y 0x0000555555555151 in start at $src:23^M
+ breakpoint already hit 1 time^M
+ 3 breakpoint keep y 0x0000555555555167 in main at $src:36 thread 2^M
+ stop only in thread 2^M
+ 4 breakpoint keep y 0x000055555555515c in end at $src:29^M
+ breakpoint already hit 1 time^M
+ (gdb) [Thread 0x7ffff7db1640 (LWP 19984) exited]^M
+ Thread-specific breakpoint 3 deleted - thread 2 no longer in the thread list.^M
+ FAIL: gdb.threads/thread-specific-bp.exp: non-stop: \
+ thread-specific breakpoint was deleted (timeout)
+ ...
+
+ Fix this by waiting for the "[Thread 0x7ffff7db1640 (LWP 19984) exited]"
+ message before issuing the "info breakpoint command".
+
+ Tested on x86_64-linux.
+
+2021-11-19 Christina Schimpe <christina.schimpe@intel.com>
+
+ gdb/testsuite: Extend tests for print of cv qualifiers
+ This commit supplements whatis and ptype command tests for print of
+ const-volatile qualifiers.
+
+ gdb/testsuite/ChangeLog:
+ 2021-11-16 Christina Schimpe <christina.schimpe@intel.com>
+
+ * gdb.cp/ptype-cv-cp.cc: New const and volatile typedef
+ variables.
+ * gdb.cp/ptype-cv-cp.exp: Add new tests.
+
+2021-11-19 Christina Schimpe <christina.schimpe@intel.com>
+
+ gdb: Print cv qualifiers if class attributes are substituted
+ Make ptype print const/volatile qualifiers when template or typedef
+ attributes are substituted.
+
+ For a programm like
+ ~~~
+ template<typename DataT>
+ class Cfoo
+ {
+ typedef float myfloat;
+ public:
+ DataT me0;
+ const DataT me1=1;
+ const myfloat me2=2.0;
+ };
+
+ int main()
+ {
+ Cfoo<int> cfoo;
+ return 0;
+ }
+ ~~~
+
+ gdb outputs the following type for cfoo's attributes:
+
+ ~~~
+ (gdb) b 14
+ Breakpoint 1 at 0x1170: file tmp.cc, line 14.
+ (gdb) run
+ Starting program: /tmp
+
+ Breakpoint 1, main () at tmp.cc:14
+ 14 return 0;
+ (gdb) ptype cfoo
+ type = class Cfoo<int> [with DataT = int] {
+ public:
+ DataT me0;
+ DataT me1;
+ myfloat me2;
+
+ private:
+ typedef float myfloat;
+ }
+
+ ~~~
+
+ The cv qualifiers (const in this case) are ignored for me1 and me2.
+
+ After:
+ ~~~
+ (gdb) ptype cfoo
+ type = class Cfoo<int> [with DataT = int] {
+ public:
+ DataT me0;
+ const DataT me1;
+ const myfloat me2;
+
+ private:
+ typedef float myfloat;
+ }
+ ~~~
+
+ gdb/ChangeLog:
+ 2021-11-16 Christina Schimpe <christina.schimpe@intel.com>
+
+ * gdb/c-typeprint.c: Print cv qualifiers in case of parameter
+ substitution.
+
+ gdb/testsuite/ChangeLog:
+ 2021-11-16 Christina Schimpe <christina.schimpe@intel.com>
+
+ * gdb.cp/templates.cc: New template class Cfoo with const,
+ template, typdef and integer attributes.
+ * gdb.cp/templates.exp: Add new test using ptype and ptype/r
+ commmands for template class CFoo.
+
+2021-11-19 Nelson Chu <nelson.chu@sifive.com>
+
+ RISC-V: Support new .option arch directive.
+ https://github.com/riscv/riscv-asm-manual/pull/67
+
+ Format:
+ .option arch, +<extension><version>, ...
+ .option arch, -<extension>
+ .option arch, =<ISA string>
+
+ The new direcitve is used to enable/disable extensions for the specific
+ code region. For example,
+
+ .attribute arch, "rv64ic" # arch = rv64i2p0_c2p0
+ .option push
+ .option arch, +d2p0, -c # arch = rv64i2p0_f2p0_d2p0, f is added implied
+ .option arch, =rv32gc # arch = rv32i2p0_m2p0_a2p0_f2p0_d2p0_c2p0
+ .option pop # arch = rv64i2p0_c2p0
+
+ Note that,
+ 1. ".option rvc/norvc" have the same behavior as ".option arch +c/-c".
+ 2. ".option arch -i" is illegal, since we cannot remove base i extension.
+ 3. If arch=rv64i2p0, then ".option arch, +i3p0" will update the i's version
+ from 2.0 to 3.0.
+ 4. If arch=rv64i3p0, then ".option arch, +i" will update the i's version
+ from 2.0 to the default one according to the chosen isa spec.
+
+ bfd/
+ * elfxx-riscv.c (riscv_add_subset): If the subset is already added,
+ and the new versions are not RISCV_UNKNOWN_VERSION, then update the
+ versions to the subset list.
+ (riscv_copy_subset): New function. Copy the subset from list.
+ (riscv_copy_subset_list): New function. Return the new copyed list.
+ (riscv_update_subset): Updated to make .option arch directives workable.
+ * elfxx-riscv.h: Updated.
+ gas/
+ * config/tc-riscv.c (riscv_subsets): Defined as a pointer.
+ (riscv_rps_as): Init the subset_list to NULL, we will set it later
+ once riscv_opts_stack is created or updated.
+ (struct riscv_option_stack, riscv_opts_stack): Moved forward.
+ (riscv_set_arch): Updated.
+ (s_riscv_option): Support new .option arch directive, to add, remove
+ or update subsets for the specific code region.
+ (riscv_write_out_attrs): Updated.
+ * doc/c-riscv.texi: Added document for new .option arch directive.
+ * testsuite/gas/riscv/option-arch-01a.d: New testcase.
+ * testsuite/gas/riscv/option-arch-01b.d: Likewise.
+ * testsuite/gas/riscv/option-arch-01.s: Likewise..
+ * testsuite/gas/riscv/option-arch-02.d: Likewise.
+ * testsuite/gas/riscv/option-arch-02.s: Likewise.
+ * testsuite/gas/riscv/option-arch-fail.d: Likewise.
+ * testsuite/gas/riscv/option-arch-fail.l: Likewise.
+ * testsuite/gas/riscv/option-arch-fail.s: Likewise.
+
+2021-11-19 Alan Modra <amodra@gmail.com>
+
+ Re: Add multibyte character warning option to the assembler.
+ On hppa*-hp-hpux* run_dump_test edits the test file, adjusting .comm
+ directives to suit those target's unusual syntax. Thus gas is passed
+ a temporary file name.
+
+ * testsuite/gas/all/multibyte1.l: Ignore file name.
+
+2021-11-19 Mike Frysinger <vapier@gentoo.org>
+
+ sim: install various doc files
+
+2021-11-19 Nelson Chu <nelson.chu@sifive.com>
+
+ RISC-V: Support STO_RISCV_VARIANT_CC and DT_RISCV_VARIANT_CC.
+ This is the original discussion,
+ https://github.com/riscv/riscv-elf-psabi-doc/pull/190
+
+ And here is the glibc part,
+ https://sourceware.org/pipermail/libc-alpha/2021-August/129931.html
+
+ For binutils part, we need to support a new direcitve: .variant_cc.
+ The function symbol marked by .variant_cc means it need to be resolved
+ directly without resolver for dynamic linker. We also add a new dynamic
+ entry, STO_RISCV_VARIANT_CC, to indicate there are symbols with the
+ special attribute in the dynamic symbol table of the object.
+
+ I heard that llvm already have supported this in their mainline, so
+ I think it's time to commit this.
+
+ bfd/
+ * elfnn-riscv.c (riscv_elf_link_hash_table): Added variant_cc
+ flag. It is used to check if relocations for variant CC symbols
+ may be present.
+ (allocate_dynrelocs): If the symbol has STO_RISCV_VARIANT_CC
+ flag, then raise the variant_cc flag of riscv_elf_link_hash_table.
+ (riscv_elf_size_dynamic_sections): Added dynamic entry for
+ variant_cc.
+ (riscv_elf_merge_symbol_attribute): New function, used to merge
+ non-visibility st_other attributes, including STO_RISCV_VARIANT_CC.
+ binutils/
+ * readelf.c (get_riscv_dynamic_type): New function.
+ (get_dynamic_type): Called get_riscv_dynamic_type for riscv targets.
+ (get_riscv_symbol_other): New function.
+ (get_symbol_other): Called get_riscv_symbol_other for riscv targets.
+ gas/
+ * config/tc-riscv.c (s_variant_cc): Marked symbol that it follows a
+ variant CC convention.
+ (riscv_elf_copy_symbol_attributes): Same as elf_copy_symbol_attributes,
+ but without copying st_other. If a function symbol has special st_other
+ value set via directives, then attaching an IFUNC resolver to that symbol
+ should not override the st_other setting.
+ (riscv_pseudo_table): Support variant_cc diretive.
+ * config/tc-riscv.h (OBJ_COPY_SYMBOL_ATTRIBUTES): Defined.
+ * testsuite/gas/riscv/variant_cc-set.d: New testcase.
+ * testsuite/gas/riscv/variant_cc-set.s: Likewise.
+ * testsuite/gas/riscv/variant_cc.d: Likewise.
+ * testsuite/gas/riscv/variant_cc.s: Likewise.
+ include/
+ * elf/riscv.h (DT_RISCV_VARIANT_CC): Defined to (DT_LOPROC + 1).
+ (STO_RISCV_VARIANT_CC): Defined to 0x80.
+ ld/
+ * testsuite/ld-riscv-elf/variant_cc-1.s: New testcase.
+ * testsuite/ld-riscv-elf/variant_cc-2.s: Likewise.
+ * testsuite/ld-riscv-elf/variant_cc-now.d: Likewise.
+ * testsuite/ld-riscv-elf/variant_cc-r.d: Likewise.
+ * testsuite/ld-riscv-elf/variant_cc-shared.d: Likewise.
+ * testsuite/ld-riscv-elf/ld-riscv-elf.exp: Updated.
+
+2021-11-19 Mike Frysinger <vapier@gentoo.org>
+
+ sim: use program_transform_name for libsim
+ Instead of always using target_alias as a prefix on the name, use
+ program_transform_name instead so that the library is scoped in the
+ same way as the run program.
+
+ sim: avoid installing headers when there is no sim
+ If we aren't building any sims, don't install the sim headers as they
+ won't be useful to anyone.
+
+2021-11-19 GDB Administrator <gdbadmin@sourceware.org>
+
+ Automatic date update in version.in
+
+2021-11-18 Kevin Buettner <kevinb@redhat.com>
+
+ dprintf-execution-x-script.exp: Adjust test for native-extended-gdbserver
+ Without this commit, doing...
+
+ make check RUNTESTFLAGS="--target_board=native-extended-gdbserver" \
+ TESTS="gdb.base/dprintf-execution-x-script.exp"
+
+ ...will show one failure.
+
+ Here's a snippet from gdb.log showing the circumstances - I've trimmed
+ the paths for readability:
+
+ builtin_spawn gdb -nw -nx -data-directory data-directory -iex set height 0 -iex set width 0 -iex set auto-connect-native-target off -iex set sysroot -ex set height unlimited -x testsuite/gdb.base/dprintf-execution-x-script.gdb --args testsuite/outputs/gdb.base/dprintf-execution-x-script/dprintf-execution-x-script
+ ...
+ Reading symbols from testsuite/outputs/gdb.base/dprintf-execution-x-script/dprintf-execution-x-script...
+ Dprintf 1 at 0x40116e: file testsuite/gdb.base/dprintf-execution-x-script.c, line 38.
+ Breakpoint 2 at 0x40113a: file testsuite/gdb.base/dprintf-execution-x-script.c, line 26.
+ testsuite/gdb.base/dprintf-execution-x-script.gdb:21: Error in sourced command file:
+ Don't know how to run. Try "help target".
+ (gdb) FAIL: gdb.base/dprintf-execution-x-script.exp: load and run script with -x
+ ...
+ GNU gdb (GDB) 12.0.50.20211118-git
+ Copyright (C) 2021 Free Software Foundation, Inc.
+ ...
+ (gdb) set height 0
+ (gdb) set width 0
+ (gdb) builtin_spawn gdbserver/gdbserver --once --multi localhost:2346
+ Listening on port 2346
+ target extended-remote localhost:2346
+ Remote debugging using localhost:2346
+ ...
+ [Tests after this point will pass.]
+
+ Note that the command which spawns gdb prevents the gdb script from
+ using the native target via "-iex set auto-connect-native-target off".
+
+ Moreover, the script in question contains a "run" command, so GDB
+ doesn't know how to run (since it's prevented from using the native
+ target and no alternate "target" command has been issued. But, once
+ GDB finishes starting up, the test will spawn a gdbserver and then
+ connect to it. The other (two) tests after this point both pass.
+
+ I've fixed this by using gdb_test_multiple instead of gdb_test.
+ When a "Don't know how to run message" is received, the test is
+ unsupported.
+
+ I've also added a comment explaining the reason for needing to check
+ for "Don't know how to run" despite bailing out at the top of the test
+ via:
+
+ if ![target_can_use_run_cmd] {
+ return 0
+ }
+
+2021-11-18 Simon Marchi <simon.marchi@polymtl.ca>
+
+ gdb: fix array-view-selftests.c build with g++ 4.8
+ When building with g++ 4.8, I get:
+
+ CXX unittests/array-view-selftests.o
+ /home/smarchi/src/binutils-gdb/gdb/unittests/array-view-selftests.c:123:42: error: expected 'class' before 'Container'
+ template<template<typename ...> typename Container>
+ ^
+
+ I am no C++ template expert, but it looks like if I change "typename" for
+ "class", as the compiler kind of suggests, the code compiles.
+
+ Change-Id: I9c3edd29fb2b190069f0ce0dbf3bc3604d175f48
+
+2021-11-18 Simon Marchi <simon.marchi@polymtl.ca>
+
+ gdb: fix ia64-tdep.c build with g++ 4.8
+ When building with g++ 4.8, I get:
+
+ CXX ia64-tdep.o
+ /home/smarchi/src/binutils-gdb/gdb/ia64-tdep.c:3862:1: error: could not convert '{ia64_allocate_new_rse_frame, ia64_store_argument_in_slot, ia64_set_function_addr}' from '<brace
+ -enclosed initializer list>' to 'const ia64_infcall_ops'
+ };
+ ^
+
+ This happens since commit 345bd07cce3 ("gdb: fix gdbarch_tdep ODR
+ violation"), which added default values for ia64_infcall_ops fields. It
+ looks like g++ 4.8 doesn't like initializing the ia64_infcall_ops object
+ using the brace-enclosed initializer list when the ia64_infcall_ops
+ fields are assigned default values.
+
+ Later compilers don't have a problem with that, so I suppose that the
+ code is correct, but still, change it to make gcc 4.8 happy. Don't
+ initialize the fields of ia64_infcall_ops directly, instead
+ default-initialize ia64_gdbarch_tdep::infcall_ops.
+
+ Change-Id: I35e3a61abd7b7bbcafe6cb207078c738c5266d76
+
+2021-11-18 Simon Marchi <simon.marchi@polymtl.ca>
+
+ gdb: move AIX_TEXT_SEGMENT_BASE to rs6000-aix-tdep.c, remove rs6000-tdep.h
+ The contents of rs6000-tdep.h (AIX_TEXT_SEGMENT_BASE) is AIX-specific,
+ so I thought that this file should be named rs6000-aix-tdep.h. But
+ there's already a rs6000-aix-tdep.h, so then I though
+ AIX_TEXT_SEGMENT_BASE should simply be moved there, and rs6000-tdep.h
+ deleted. But then I realized that AIX_TEXT_SEGMENT_BASE is only used in
+ rs6000-aix-tdep.c, so move it to the beginning of that file.
+
+ Change-Id: Ia212c6fae202f31aedb46575821cd642beeda7a3
+
+2021-11-18 Simon Marchi <simon.marchi@polymtl.ca>
+
+ gdb: rename rs6000-nat.c to rs6000-aix-nat.c
+ This file seems to be AIX-specific, according to its contents and
+ configure.nat. Rename it to rs6000-aix-nat.c, to make that clear (and
+ to follow the convention).
+
+ Change-Id: Ib418dddc6b79b2e28f64431121742b5e87f5f4f5
+
+2021-11-18 Tom de Vries <tdevries@suse.de>
+
+ [gdb/doc] Fix negative repeat count examining memory example
+ The documentation for the examining memory command x contains an example:
+ ...
+ You can also specify a negative repeat count to examine memory backward from
+ the given address. For example, 'x/-3uh 0x54320' prints three halfwords (h)
+ at 0x54314, 0x54328, and 0x5431c.
+ ...
+
+ The 0x54328 looks like a typo, which was intended to be 0x54318.
+
+ But the series uses a 4-byte distance, while the halfword size used in the
+ command means a 2-byte distance, so the series should be:
+ ...
+ 0x5431a, 0x5431c, and 0x5431e.
+ ...
+
+ Fix this by updating the addresses in the example accordingly.
+
+ Reported here ( https://sourceware.org/pipermail/gdb/2021-November/049784.html
+ ).
+
+2021-11-18 Nick Clifton <nickc@redhat.com>
+
+ Add multibyte character warning option to the assembler.
+ * as.c (parse_args): Add support for --multibyte-handling.
+ * as.h (multibyte_handling): Declare.
+ * app.c (scan_for_multibyte_characters): New function.
+ (do_scrub_chars): Call the new function if multibyte warning is
+ enabled.
+ * input-scrub,c (input_scrub_next_buffer): Call the multibyte
+ scanning function if multibyte warnings are enabled.
+ * symbols.c (struct symbol_flags): Add multibyte_warned bit.
+ (symbol_init): Call the multibyte scanning function if multibyte
+ symbol warnings are enabled.
+ (S_SET_SEGMENT): Likewise.
+ * NEWS: Mention the new feature.
+ * doc/as.texi: Document the new feature.
+ * testsuite/gas/all/multibyte.s: New test source file.
+ * testsuite/gas/all/multibyte1.d: New test driver file.
+ * testsuite/gas/all/multibyte1.l: New test expected output.
+ * testsuite/gas/all/multibyte2.d: New test driver file.
+ * testsuite/gas/all/multibyte2.l: New test expected output.
+ * testsuite/gas/all/gas.exp: Run the new tests.
+
+2021-11-18 Simon Marchi <simon.marchi@polymtl.ca>
+
+ gdb: include gdbarch.h in all files extending gdbarch_tdep
+ Commit 345bd07cce33 ("gdb: fix gdbarch_tdep ODR violation") made a bunch
+ of files define a *_gdbarch_tdep class that inherits from a gdbarch_tdep
+ base. But some of these files don't include gdbarch.h, where
+ gdbarch_tdep is defined. This may cause build errors if gdbarch.h isn't
+ already included by chance by some other header file. Avoid this by
+ making them include gdbarch.h.
+
+ Change-Id: If433d302007e274daa4f656cfc94f769cf1aa68a
+
+2021-11-18 Simon Marchi <simon.marchi@polymtl.ca>
+
+ gdbsupport: make gdb_assert_not_reached accept a format string
+ Change gdb_assert_not_reached to accept a format string plus
+ corresponding arguments. This allows giving more precise messages.
+
+ Because the format string passed by the caller is prepended with a "%s:"
+ to add the function name, the callers can no longer pass a translated
+ string (`_(...)`). Make the gdb_assert_not_reached include the _(),
+ just like the gdb_assert_fail macro just above.
+
+ Change-Id: Id0cfda5a57979df6cdaacaba0d55dd91ae9efee7
+
+2021-11-18 Carl Love <cel@us.ibm.com>
+
+ gdb fix for catch-syscall.exp
+ Remove check_continue "execve" from Proc test_catch_syscall_execve.
+
+ The check_continue proceedure checs that the command, execve, starts and
+ checks for the return from the command. The execve command starts a new
+ program and thus the return from the command causing the test to fail.
+
+ The call to proc check_continue "execve" is removed and replaced with
+ just the call to check_call_to_syscall "execve" to verify the command
+ executed. The next test in proc test_catch_syscall_execve verifies that
+ the new program started and hit the break point in main.
+
+ Update the check for the PowerPC architecture. Power Little Endian systems
+ include "le" in the name. The istarget "power64-*-linux*" check fails to
+ match LE sytems. The expected string is updated to capture both Big Endian
+ and Little Endian systems. Power 10 LE istarget prints as:
+ powerpc64le-unknown-linux-gnu.
+
+ This patch fixes three failures and the error:
+
+ ERROR: can't read "arch1": no such variable
+
+ Patch tested on Power 10 ppc64le GNU/Linux platform.
+
+2021-11-18 Carl Love <cel@us.ibm.com>
+
+ gdb: PowerPC fix gdb.base/break-interp.exp
+ This patch fixes eight test failures on PowerPC for the test
+ gdb.base/break-interp.exp. The patch adds a funtion and registers it to
+ setup the displaced stepping for ppc-linux platform. The patch moves the
+ struct ppc_inferior_data to the ppc-tdep.h include file to make it visible
+ to the ppc-linux-tdep.c and rs6000-tdep.c files. Additionally the function
+ get_ppc_per_inferior is made external in ppc-tdep.h to make it visible in
+ both files.
+
+ Tested on Power 10 ppc64le-linux with no regressions.
+
+2021-11-18 Carl Love <cel@us.ibm.com>
+
+ gdb fix PowerPC test gdb.arch/ppc-longdouble.exp
+ The test complains of duplicate tests.
+
+ DUPLICATE: gdb.arch/ppc-longdouble.exp: continue to breakpoint: return
+
+ The do_test calls gdb_continue_to_breakpoint "return". The duplicates
+ are the result of calling do_test three times with different arguments.
+
+ This patch fixes the duplicate tests by adding $name to the
+ gdb_continue_to_breakpoint argument.
+
+ Patch tested on Power 10 ppc64le GNU/Linux, no duplicate tests reported,
+ no new regression errors.
+
+2021-11-18 H.J. Lu <hjl.tools@gmail.com>
+
+ elf/x86: Issue an error on discarded output .plt section
+ Issue an error, instead of crash, on discarded output .plt section.
+
+ bfd/
+
+ PR ld/28597
+ * elf32-i386.c (elf_i386_finish_dynamic_sections): Issue an error
+ on discarded output .plt section.
+ * elf64-x86-64.c (elf_x86_64_finish_dynamic_sections): Likewise.
+
+ ld/
+
+ PR ld/28597
+ * testsuite/ld-elf/pr28597.d: New file.
+ * testsuite/ld-elf/pr28597.s: Likewise.
+ * testsuite/ld-elf/pr28597.t: Likewise.
+
+2021-11-18 Tom de Vries <tdevries@suse.de>
+
+ [gdb/testsuite] Add missing wait in gdb.base/signals-state-child.exp
+ On OBS I ran into:
+ ...
+ (gdb) shell diff -s outputs/gdb.base/signals-state-child/standalone.txt \
+ outputs/gdb.base/signals-state-child/gdb.txt^M
+ diff: outputs/gdb.base/signals-state-child/standalone.txt: \
+ No such file or directory^M
+ (gdb) FAIL: gdb.base/signals-state-child.exp: signals states are identical
+ ...
+
+ I managed to reproduce this by adding "sleep (5)" at the start of main in
+ signals-state-child.c.
+
+ Fix this by waiting on the result of the spawned command.
+
+ Tested on x86_64-linux.
+
+2021-11-18 Alan Modra <amodra@gmail.com>
+
+ Re: Don't compile some opcodes files when bfd is 32-bit only
+ Put bpf back in the 32-bit targets, even though bpf requires a 64-bit
+ bfd. bpf sim support apparently works without being 64-bit.
+
+ * Makefile.am (TARGET64_LIBOPCODES_CFILES): Move bpf files..
+ (TARGET32_LIBOPCODES_CFILES): ..to here.
+ * Makefile.in: Regenerate.
+
+2021-11-18 Alan Modra <amodra@gmail.com>
+
+ Pass DEBUGINFOD_CFLAGS when compiling dwarf.c
+ Pick up the elfutils/debuginfod.h install location -I flags from
+ a variable set by debuginfod.m4 (via pkg.m4 and pkg-config).
+
+ * Makefile.am (DEBUGINFOD_CFLAGS): Define.
+ (dwarf.@OBJECT@): New rule.
+
+2021-11-18 jiawei <jiawei@iscas.ac.cn>
+
+ RISC-V: Add testcases for z[fdq]inx
+ Use gpr when the zfinx enable, the testcases contain float
+ instructions that reuse by z[fdq]inx.
+
+ gas/ChangeLog:
+
+ * testsuite/gas/riscv/zdinx.d: New test.
+ * testsuite/gas/riscv/zdinx.s: New test.
+ * testsuite/gas/riscv/zfinx.d: New test.
+ * testsuite/gas/riscv/zfinx.s: New test.
+ * testsuite/gas/riscv/zqinx.d: New test.
+ * testsuite/gas/riscv/zqinx.s: New test.
+
+ Reviewed-by: Palmer Dabbelt <palmer@rivosinc.com>
+
+2021-11-18 jiawei <jiawei@iscas.ac.cn>
+
+ RISC-V: Add instructions and operand set for z[fdq]inx
+ Reuse float instructions in INSN_CLASS_F/D/Q, use riscv_subset_supports to
+ verify if z*inx enabled and use gpr instead of fpr when z*inx is enable.
+
+ bfd/ChangeLog:
+
+ * elfxx-riscv.c (riscv_multi_subset_supports): Added support for
+ z*inx extension.
+
+ gas/ChangeLog:
+
+ * config/tc-riscv.c (riscv_ip): Added register choice for z*inx.
+
+ include/ChangeLog:
+
+ * opcode/riscv.h (enum riscv_insn_class): Reused INSN_CLASS_* for z*inx.
+
+ opcodes/ChangeLog:
+
+ * riscv-dis.c (riscv_disassemble_insn): Added disassemble check for
+ z*inx.
+ * riscv-opc.c: Reused INSN_CLASS_* for z*inx.
+
+ Reviewed-by: Palmer Dabbelt <palmer@rivosinc.com>
+
+2021-11-18 jiawei <jiawei@iscas.ac.cn>
+
+ RISC-V: Add mininal support for z[fdq]inx
+ Minimal support for zfinx, zdinx, zqinx. Like f/d/q, the zqinx
+ imply zdinx and zdinx imply zfinx, where zfinx are not compatible
+ with f/d/q.
+
+ bfd/ChangeLog:
+
+ * elfxx-riscv.c (riscv_implicit_subsets): Added implicit rules
+ for z*inx extensions.
+ (riscv_supported_std_z_ext): Added entries for z*inx.
+ (riscv_parse_check_conflicts): Added conflict check for z*inx.
+
+ Reviewed-by: Palmer Dabbelt <palmer@rivosinc.com>
+
+2021-11-18 GDB Administrator <gdbadmin@sourceware.org>
+
+ Automatic date update in version.in
+
+2021-11-17 Przemyslaw Wirkus <przemyslaw.wirkus@arm.com>
+
+ aarch64: [SME] SVE2 instructions added to support SME
+ This patch is adding new SVE2 instructions added to support SME extension.
+ The following SVE2 instructions are added by the SME architecture:
+ * PSEL,
+ * REVD, SCLAMP and UCLAMP.
+
+ gas/ChangeLog:
+
+ * config/tc-aarch64.c (parse_sme_pred_reg_with_index):
+ New parser.
+ (parse_operands): New parser.
+ * testsuite/gas/aarch64/sme-9-illegal.d: New test.
+ * testsuite/gas/aarch64/sme-9-illegal.l: New test.
+ * testsuite/gas/aarch64/sme-9-illegal.s: New test.
+ * testsuite/gas/aarch64/sme-9.d: New test.
+ * testsuite/gas/aarch64/sme-9.s: New test.
+
+ include/ChangeLog:
+
+ * opcode/aarch64.h (enum aarch64_opnd): New operand
+ AARCH64_OPND_SME_PnT_Wm_imm.
+
+ opcodes/ChangeLog:
+
+ * aarch64-asm.c (aarch64_ins_sme_pred_reg_with_index):
+ New inserter.
+ * aarch64-dis.c (aarch64_ext_sme_pred_reg_with_index):
+ New extractor.
+ * aarch64-opc.c (aarch64_print_operand): Printout of
+ OPND_SME_PnT_Wm_imm.
+ * aarch64-opc.h (enum aarch64_field_kind): New bitfields
+ FLD_SME_Rm, FLD_SME_i1, FLD_SME_tszh, FLD_SME_tszl.
+ * aarch64-tbl.h (OP_SVE_NN_BHSD): New qualifier.
+ (OP_SVE_QMQ): New qualifier.
+ (struct aarch64_opcode): New instructions PSEL, REVD,
+ SCLAMP and UCLAMP.
+ aarch64-asm-2.c: Regenerate.
+ aarch64-dis-2.c: Regenerate.
+ aarch64-opc-2.c: Regenerate.
+
+2021-11-17 Przemyslaw Wirkus <przemyslaw.wirkus@arm.com>
+
+ aarch64: [SME] Add new SME system registers
+ This patch is adding miscellaneous SME related system registers.
+
+ gas/ChangeLog:
+
+ * testsuite/gas/aarch64/sme-sysreg.d: New test.
+ * testsuite/gas/aarch64/sme-sysreg.s: New test.
+ * testsuite/gas/aarch64/sme-sysreg-illegal.d: New test.
+ * testsuite/gas/aarch64/sme-sysreg-illegal.l: New test.
+ * testsuite/gas/aarch64/sme-sysreg-illegal.s: New test.
+
+ opcodes/ChangeLog:
+
+ * aarch64-opc.c: New system registers id_aa64smfr0_el1,
+ smcr_el1, smcr_el12, smcr_el2, smcr_el3, smpri_el1,
+ smprimap_el2, smidr_el1, tpidr2_el0 and mpamsm_el1.
+
+2021-11-17 Przemyslaw Wirkus <przemyslaw.wirkus@arm.com>
+
+ aarch64: [SME] Add SME mode selection and state access instructions
+ This patch is adding new SME mode selection and state access instructions:
+ * Add SMSTART and SMSTOP instructions.
+ * Add SVCR system register.
+
+ gas/ChangeLog:
+
+ * config/tc-aarch64.c (parse_sme_sm_za): New parser.
+ (parse_operands): New parser.
+ * testsuite/gas/aarch64/sme-8-illegal.d: New test.
+ * testsuite/gas/aarch64/sme-8-illegal.l: New test.
+ * testsuite/gas/aarch64/sme-8-illegal.s: New test.
+ * testsuite/gas/aarch64/sme-8.d: New test.
+ * testsuite/gas/aarch64/sme-8.s: New test.
+
+ include/ChangeLog:
+
+ * opcode/aarch64.h (enum aarch64_opnd): New operand
+ AARCH64_OPND_SME_SM_ZA.
+ (enum aarch64_insn_class): New instruction classes
+ sme_start and sme_stop.
+
+ opcodes/ChangeLog:
+
+ * aarch64-asm.c (aarch64_ins_pstatefield): New inserter.
+ (aarch64_ins_sme_sm_za): New inserter.
+ * aarch64-dis.c (aarch64_ext_imm): New extractor.
+ (aarch64_ext_pstatefield): New extractor.
+ (aarch64_ext_sme_sm_za): New extractor.
+ * aarch64-opc.c (operand_general_constraint_met_p):
+ New pstatefield value for SME instructions.
+ (aarch64_print_operand): Printout for OPND_SME_SM_ZA.
+ (SR_SME): New register SVCR.
+ * aarch64-opc.h (F_REG_IN_CRM): New register endcoding.
+ * aarch64-opc.h (F_IMM_IN_CRM): New immediate endcoding.
+ (PSTATE_ENCODE_CRM): Encode CRm field.
+ (PSTATE_DECODE_CRM): Decode CRm field.
+ (PSTATE_ENCODE_CRM_IMM): Encode CRm immediate field.
+ (PSTATE_DECODE_CRM_IMM): Decode CRm immediate field.
+ (PSTATE_ENCODE_CRM_AND_IMM): Encode CRm and immediate
+ field.
+ * aarch64-tbl.h (struct aarch64_opcode): New SMSTART
+ and SMSTOP instructions.
+ aarch64-asm-2.c: Regenerate.
+ aarch64-dis-2.c: Regenerate.
+ aarch64-opc-2.c: Regenerate.
+
+2021-11-17 Przemyslaw Wirkus <przemyslaw.wirkus@arm.com>
+
+ aarch64: [SME] Add LD1x, ST1x, LDR and STR instructions
+ This patch is adding new loads and stores defined by SME instructions.
+
+ gas/ChangeLog:
+
+ * config/tc-aarch64.c (parse_sme_address): New parser.
+ (parse_sme_za_hv_tiles_operand_with_braces): New parser.
+ (parse_sme_za_array): New parser.
+ (output_operand_error_record): Print error details if
+ present.
+ (parse_operands): Support new operands.
+ * testsuite/gas/aarch64/sme-5-illegal.d: New test.
+ * testsuite/gas/aarch64/sme-5-illegal.l: New test.
+ * testsuite/gas/aarch64/sme-5-illegal.s: New test.
+ * testsuite/gas/aarch64/sme-5.d: New test.
+ * testsuite/gas/aarch64/sme-5.s: New test.
+ * testsuite/gas/aarch64/sme-6-illegal.d: New test.
+ * testsuite/gas/aarch64/sme-6-illegal.l: New test.
+ * testsuite/gas/aarch64/sme-6-illegal.s: New test.
+ * testsuite/gas/aarch64/sme-6.d: New test.
+ * testsuite/gas/aarch64/sme-6.s: New test.
+ * testsuite/gas/aarch64/sme-7-illegal.d: New test.
+ * testsuite/gas/aarch64/sme-7-illegal.l: New test.
+ * testsuite/gas/aarch64/sme-7-illegal.s: New test.
+ * testsuite/gas/aarch64/sme-7.d: New test.
+ * testsuite/gas/aarch64/sme-7.s: New test.
+
+ include/ChangeLog:
+
+ * opcode/aarch64.h (enum aarch64_opnd): New operands.
+ (enum aarch64_insn_class): Added sme_ldr and sme_str.
+ (AARCH64_OPDE_UNTIED_IMMS): New operand error kind.
+
+ opcodes/ChangeLog:
+
+ * aarch64-asm.c (aarch64_ins_sme_za_hv_tiles): New inserter.
+ (aarch64_ins_sme_za_list): New inserter.
+ (aarch64_ins_sme_za_array): New inserter.
+ (aarch64_ins_sme_addr_ri_u4xvl): New inserter.
+ * aarch64-asm.h (AARCH64_DECL_OPD_INSERTER): Added
+ ins_sme_za_list, ins_sme_za_array and ins_sme_addr_ri_u4xvl.
+ * aarch64-dis.c (aarch64_ext_sme_za_hv_tiles): New extractor.
+ (aarch64_ext_sme_za_list): New extractor.
+ (aarch64_ext_sme_za_array): New extractor.
+ (aarch64_ext_sme_addr_ri_u4xvl): New extractor.
+ * aarch64-dis.h (AARCH64_DECL_OPD_EXTRACTOR): Added
+ ext_sme_za_list, ext_sme_za_array and ext_sme_addr_ri_u4xvl.
+ * aarch64-opc.c (operand_general_constraint_met_p):
+ (aarch64_match_operands_constraint): Handle sme_ldr, sme_str
+ and sme_misc.
+ (aarch64_print_operand): New operands supported.
+ * aarch64-tbl.h (OP_SVE_QUU): New qualifier.
+ (OP_SVE_QZU): New qualifier.
+ aarch64-asm-2.c: Regenerate.
+ aarch64-dis-2.c: Regenerate.
+ aarch64-opc-2.c: Regenerate.
+
+2021-11-17 Przemyslaw Wirkus <przemyslaw.wirkus@arm.com>
+
+ aarch64: [SME] Add ZERO instruction
+ This patch is adding ZERO (a list of 64-bit element ZA tiles)
+ instruction.
+
+ gas/ChangeLog:
+
+ * config/tc-aarch64.c (parse_sme_list_of_64bit_tiles):
+ New parser.
+ (parse_operands): Handle OPND_SME_list_of_64bit_tiles.
+ * testsuite/gas/aarch64/sme-4-illegal.d: New test.
+ * testsuite/gas/aarch64/sme-4-illegal.l: New test.
+ * testsuite/gas/aarch64/sme-4-illegal.s: New test.
+ * testsuite/gas/aarch64/sme-4.d: New test.
+ * testsuite/gas/aarch64/sme-4.s: New test.
+
+ include/ChangeLog:
+
+ * opcode/aarch64.h (enum aarch64_opnd): New operand
+ AARCH64_OPND_SME_list_of_64bit_tiles.
+
+ opcodes/ChangeLog:
+
+ * aarch64-opc.c (print_sme_za_list): New printing function.
+ (aarch64_print_operand): Handle OPND_SME_list_of_64bit_tiles.
+ * aarch64-opc.h (enum aarch64_field_kind): New bitfield
+ FLD_SME_zero_mask.
+ * aarch64-tbl.h (struct aarch64_opcode): New ZERO instruction.
+ aarch64-asm-2.c: Regenerate.
+ aarch64-dis-2.c: Regenerate.
+ aarch64-opc-2.c: Regenerate.
+
+2021-11-17 Przemyslaw Wirkus <przemyslaw.wirkus@arm.com>
+
+ aarch64: [SME] Add MOV and MOVA instructions
+ This patch is adding new MOV (alias) and MOVA SME instruction.
+
+ gas/ChangeLog:
+
+ * config/tc-aarch64.c (enum sme_hv_slice): new enum.
+ (struct reloc_entry): Added ZAH and ZAV registers.
+ (parse_sme_immediate): Immediate parser.
+ (parse_sme_za_hv_tiles_operand): ZA tile parser.
+ (parse_sme_za_hv_tiles_operand_index): Index parser.
+ (parse_operands): Added ZA tile parser calls.
+ (REGNUMS): New macro. Regs with suffix.
+ (REGSET16S): New macro. 16 regs with suffix.
+ * testsuite/gas/aarch64/sme-2-illegal.d: New test.
+ * testsuite/gas/aarch64/sme-2-illegal.l: New test.
+ * testsuite/gas/aarch64/sme-2-illegal.s: New test.
+ * testsuite/gas/aarch64/sme-2.d: New test.
+ * testsuite/gas/aarch64/sme-2.s: New test.
+ * testsuite/gas/aarch64/sme-2a.d: New test.
+ * testsuite/gas/aarch64/sme-2a.s: New test.
+ * testsuite/gas/aarch64/sme-3-illegal.d: New test.
+ * testsuite/gas/aarch64/sme-3-illegal.l: New test.
+ * testsuite/gas/aarch64/sme-3-illegal.s: New test.
+ * testsuite/gas/aarch64/sme-3.d: New test.
+ * testsuite/gas/aarch64/sme-3.s: New test.
+ * testsuite/gas/aarch64/sme-3a.d: New test.
+ * testsuite/gas/aarch64/sme-3a.s: New test.
+
+ include/ChangeLog:
+
+ * opcode/aarch64.h (enum aarch64_opnd): New enums
+ AARCH64_OPND_SME_ZA_HV_idx_src and
+ AARCH64_OPND_SME_ZA_HV_idx_dest.
+ (struct aarch64_opnd_info): New ZA tile vector struct.
+
+ opcodes/ChangeLog:
+
+ * aarch64-asm.c (aarch64_ins_sme_za_hv_tiles):
+ New inserter.
+ * aarch64-asm.h (AARCH64_DECL_OPD_INSERTER):
+ New inserter ins_sme_za_hv_tiles.
+ * aarch64-dis.c (aarch64_ext_sme_za_hv_tiles):
+ New extractor.
+ * aarch64-dis.h (AARCH64_DECL_OPD_EXTRACTOR):
+ New extractor ext_sme_za_hv_tiles.
+ * aarch64-opc.c (aarch64_print_operand):
+ Handle SME_ZA_HV_idx_src and SME_ZA_HV_idx_dest.
+ * aarch64-opc.h (enum aarch64_field_kind): New enums
+ FLD_SME_size_10, FLD_SME_Q, FLD_SME_V and FLD_SME_Rv.
+ (struct aarch64_operand): Increase fields size to 5.
+ * aarch64-tbl.h (OP_SME_BHSDQ_PM_BHSDQ): New qualifiers
+ aarch64-asm-2.c: Regenerate.
+ aarch64-dis-2.c: Regenerate.
+ aarch64-opc-2.c: Regenerate.
+
+2021-11-17 Przemyslaw Wirkus <przemyslaw.wirkus@arm.com>
+
+ aarch64: [SME] Add SME instructions
+ Patch is adding new SME matrix instructions. Please note additional
+ instructions will be added in following patches.
+
+ gas/ChangeLog:
+
+ * config/tc-aarch64.c (parse_sme_zada_operand):
+ New parser.
+ * config/tc-aarch64.c (parse_reg_with_qual):
+ New reg parser.
+ * config/tc-aarch64.c (R_ZA): New egister type.
+ (parse_operands): New parser.
+ * testsuite/gas/aarch64/sme-illegal.d: New test.
+ * testsuite/gas/aarch64/sme-illegal.l: New test.
+ * testsuite/gas/aarch64/sme-illegal.s: New test.
+ * testsuite/gas/aarch64/sme.d: New test.
+ * testsuite/gas/aarch64/sme.s: New test.
+ * testsuite/gas/aarch64/sme-f64.d: New test.
+ * testsuite/gas/aarch64/sme-f64.s: New test.
+ * testsuite/gas/aarch64/sme-i64.d: New test.
+ * testsuite/gas/aarch64/sme-i64.s: New test.
+
+ include/ChangeLog:
+
+ * opcode/aarch64.h (enum aarch64_opnd): New operands
+ AARCH64_OPND_SME_ZAda_2b, AARCH64_OPND_SME_ZAda_3b and
+ AARCH64_OPND_SME_Pm.
+ (enum aarch64_insn_class): New instruction class sme_misc.
+
+ opcodes/ChangeLog:
+
+ * aarch64-opc.c (aarch64_print_operand):
+ Print OPND_SME_ZAda_2b and OPND_SME_ZAda_3b operands.
+ (verify_constraints): Handle OPND_SME_Pm.
+ * aarch64-opc.h (enum aarch64_field_kind):
+ New bit fields FLD_SME_ZAda_2b, FLD_SME_ZAda_3b and FLD_SME_Pm.
+ * aarch64-tbl.h (OP_SME_ZADA_PN_PM_ZN_S): New qualifier set.
+ (OP_SME_ZADA_PN_PM_ZN_D): New qualifier.
+ (OP_SME_ZADA_PN_PM_ZN_ZM): New qualifier.
+ (OP_SME_ZADA_S_PM_PM_S_S): New qualifier.
+ (OP_SME_ZADA_D_PM_PM_D_D): New qualifier.
+ (OP_SME_ZADA_S_PM_PM_H_H): New qualifier.
+ (OP_SME_ZADA_S_PM_PM_B_B): New qualifier.
+ (OP_SME_ZADA_D_PM_PM_H_H): New qualifier.
+ (SME_INSN): New instruction macro.
+ (SME_F64_INSN): New instruction macro.
+ (SME_I64_INSN): New instruction macro.
+ (SME_INSNC): New instruction macro.
+ (struct aarch64_opcode): New SME instructions.
+ aarch64-asm-2.c: Regenerate.
+ aarch64-dis-2.c: Regenerate.
+ aarch64-opc-2.c: Regenerate.
+
+2021-11-17 Przemyslaw Wirkus <przemyslaw.wirkus@arm.com>
+
+ aarch64: [SME] Add +sme option to -march
+ This series of patches (tagged [SME]) add support for the Scalable
+ Matrix Extension. Patch introduces new command line options: +sme, +sme-f64 and
+ +sme-i64 to -march command line options.
+
+ gas/ChangeLog:
+
+ * NEWS: Updated docs.
+ * config/tc-aarch64.c: New SME command line options.
+ * doc/c-aarch64.texi: Update docs.
+
+ include/ChangeLog:
+
+ * opcode/aarch64.h (AARCH64_FEATURE_SME): New flag.
+ (AARCH64_FEATURE_SME_F64): New flag.
+ (AARCH64_FEATURE_SME_I64): New flag.
+
+ opcodes/ChangeLog:
+
+ * aarch64-tbl.h (SME): New feature object.
+
+2021-11-17 Jeremy Drake <cygwin@jdrake.com>
+
+ Set the default DLL chracteristics to 0 for Cygwin based targets.
+ * emultempl/pep.em (DEFAULT_DLL_CHARACTERISTICS): Set to 0 for
+ Cygwin targets.
+ * emultempl/pep.em (DEFAULT_DLL_CHARACTERISTICS): Likewise.
+
+2021-11-17 Nick Clifton <nickc@redhat.com>
+
+ Fix the linker script parser so that it will recognise the PT_GNU_RELRO segment type, and the linker itself so that it will gracefully handle being unable to assign any sections to such a segment.
+ PR 28452
+ bfd * elf.c (assign_file_positions_for_non_load_sections): Replace
+ assertion with a warning message.
+
+ ld * ldgram.y: Add support for PT_GNU_RELRO and PT_GNU_PROPERTY.
+ * ldgram.c: Regenerate.
+
+2021-11-17 Andreas Arnez <arnez@linux.ibm.com>
+
+ [gdb/build, s390x] Fix build after gdbarch_tdep changes
+ Commit 345bd07cce33 ("gdb: fix gdbarch_tdep ODR violation") changes a
+ declaration in s390-tdep.h from
+
+ struct gdbarch_tdep { ... };
+
+ to
+
+ struct s390_gdbarch_tdep : gdbarch_tdep { ... };
+
+ and now requires that gdbarch_tdep has been declared before. Which is
+ usually the case, except when compiling s390-linux-nat.c, where
+ s390-tdep.h is included before gdbarch.h. Thus the s390x build errors out
+ with the compiler complaining about a missing class name after the colon.
+
+ Fix this in s390-linux-nat.c, by including gdbarch.h before s390-tdep.h.
+
+2021-11-17 Luis Machado <luis.machado@linaro.org>
+
+ Expose the BTI BTYPE more explicitly in the registers
+ Augment the register description XML to expose the BTI BTYPE field contained
+ in the CPSR register. It will be displayed like so:
+
+ cpsr 0x60001000 [ EL=0 BTYPE=0 SSBS C Z ]
+
+2021-11-17 H.J. Lu <hjl.tools@gmail.com>
+
+ elfedit: Add --output-abiversion option to update ABIVERSION
+ * NEWS: Mention --output-abiversion.
+ * elfedit.c (input_elf_abiversion): New.
+ (output_elf_abiversion): Likewise.
+ (update_elf_header): Update EI_ABIVERSION.
+ (command_line_switch): Add OPTION_INPUT_ABIVERSION and
+ OPTION_OUTPUT_ABIVERSION.
+ (options): Add --input-abiversion and --output-abiversion.
+ (usage): Likewise.
+ (main): Handle --input-abiversion and --output-abiversion.
+ * doc/binutils.texi: Document --input-abiversion and
+ --output-abiversion.
+ * testsuite/binutils-all/elfedit.exp: Run elfedit-6.
+ * testsuite/binutils-all/elfedit-6.d: New file.
+
+2021-11-17 Nelson Chu <nelson.chu@sifive.com>
+
+ RISC-V: Support rvv extension with released version 1.0.
+ 2021-11-17 Jim Wilson <jimw@sifive.com>
+ Kito Cheng <kito.cheng@sifive.com>
+ Nelson Chu <nelson.chu@sifive.com>
+
+ This patch is porting from the following riscv github,
+ https://github.com/riscv/riscv-binutils-gdb/tree/rvv-1.0.x
+
+ And here is the vector spec,
+ https://github.com/riscv/riscv-v-spec
+
+ bfd/
+ * elfxx-riscv.c (riscv_implicit_subsets): Added imply rules
+ of v, zve and zvl extensions.
+ (riscv_supported_std_ext): Updated verison of v to 1.0.
+ (riscv_supported_std_z_ext): Added zve and zvl extensions.
+ (riscv_parse_check_conflicts): The zvl extensions need to
+ enable either v or zve extension.
+ (riscv_multi_subset_supports): Check the subset list to know
+ if the INSN_CLASS_V and INSN_CLASS_ZVEF instructions are supported.
+ gas/
+ * config/tc-riscv.c (enum riscv_csr_class): Added CSR_CLASS_V.
+ (enum reg_class): Added RCLASS_VECR and RCLASS_VECM.
+ (validate_riscv_insn): Check whether the rvv operands are valid.
+ (md_begin): Initialize register hash for rvv registers.
+ (macro_build): Added rvv operands when expanding rvv pseudoes.
+ (vector_macro): Expand rvv macros into one or more instructions.
+ (macro): Likewise.
+ (my_getVsetvliExpression): Similar to my_getVsetvliExpression,
+ but used for parsing vsetvli operands.
+ (riscv_ip): Parse and encode rvv operands. Besides, The rvv loads
+ and stores with EEW 64 cannot be used when zve32x is enabled.
+ * testsuite/gas/riscv/priv-reg-fail-version-1p10.d: Updated -march
+ to rv32ifv_zkr.
+ * testsuite/gas/riscv/priv-reg-fail-version-1p11.d: Likewise.
+ * testsuite/gas/riscv/priv-reg-fail-version-1p9p1.d: Likewise.
+ * testsuite/gas/riscv/priv-reg.s: Added rvv csr testcases.
+ * testsuite/gas/riscv/priv-reg-version-1p10.d: Likewise.
+ * testsuite/gas/riscv/priv-reg-version-1p11.d: Likewise.
+ * testsuite/gas/riscv/priv-reg-version-1p9p1.d: Likewise.
+ * testsuite/gas/riscv/march-imply-v.d: New testcase.
+ * testsuite/gas/riscv/vector-insns-fail-zve32xf.d: Likewise.
+ * testsuite/gas/riscv/vector-insns-fail-zve32xf.l: Likewise.
+ * testsuite/gas/riscv/vector-insns-fail-zvl.d: Likewise.
+ * testsuite/gas/riscv/vector-insns-fail-zvl.l: Likewise.
+ * testsuite/gas/riscv/vector-insns-vmsgtvx.d: Likewise.
+ * testsuite/gas/riscv/vector-insns-vmsgtvx.s: Likewise.
+ * testsuite/gas/riscv/vector-insns-zero-imm.d: Likewise.
+ * testsuite/gas/riscv/vector-insns-zero-imm.s: Likewise.
+ * testsuite/gas/riscv/vector-insns.d: Likewise.
+ * testsuite/gas/riscv/vector-insns.s: Likewise.
+ include/
+ * opcode/riscv-opc.h: Defined mask/match encodings and csrs for rvv.
+ * opcode/riscv.h: Defined rvv immediate encodings and fields.
+ (enum riscv_insn_class): Added INSN_CLASS_V and INSN_CLASS_ZVEF.
+ (INSN_V_EEW64): Defined.
+ (M_VMSGE, M_VMSGEU): Added for the rvv pseudoes.
+ opcodes/
+ * riscv-dis.c (print_insn_args): Dump the rvv operands.
+ * riscv-opc.c (riscv_vecr_names_numeric): Defined rvv registers.
+ (riscv_vecm_names_numeric): Likewise.
+ (riscv_vsew): Likewise.
+ (riscv_vlmul): Likewise.
+ (riscv_vta): Likewise.
+ (riscv_vma): Likewise.
+ (match_vs1_eq_vs2): Added for rvv Vu operand.
+ (match_vd_eq_vs1_eq_vs2): Added for rvv Vv operand.
+ (riscv_opcodes): Added rvv v1.0 instructions.
+
+2021-11-17 Sergei Trofimovich <siarheit@google.com>
+
+ gdb/nat/linux-osdata.c: fix build on gcc-12 (string overfow)
+ On gcc-12 build fails as:
+
+ ../../gdbserver/../gdb/nat/linux-osdata.c: In function 'void linux_xfer_osdata_processes(buffer*)':
+ ../../gdbserver/../gdb/nat/linux-osdata.c:330:39: error:
+ '__builtin___sprintf_chk' may write a terminating nul past the end of the destination [-Werror=format-overflow=]
+ 330 | sprintf (core_str, "%d", i);
+ | ^
+
+ It's an off-by-one case in an infeasible scenario for negative
+ huge core count. The change switches to std::string for memory
+ handling.
+
+ Tested by running 'info os processes' and checking CPU cores column.
+
+2021-11-17 Aaron Merey <amerey@redhat.com>
+
+ gdb: Add aliases for read_core_file_mappings callbacks
+ Add aliases read_core_file_mappings_loop_ftype and
+ read_core_file_mappings_pre_loop_ftype. Intended for use with
+ read_core_file_mappings.
+
+ Also add build_id parameter to read_core_file_mappings_loop_ftype.
+
+2021-11-17 Mike Frysinger <vapier@gentoo.org>
+
+ sim: testsuite: add support for $pwd replacements
+ Extend the common test framework to support $pwd replacements in
+ settings. This allows replacing the custom cris @exedir@ with it.
+
+ sim: cris: replace @srcdir@ test extension with $srcdir/$subdir
+ The common framework supports $srcdir & $subdir replacements already,
+ so replace the custom @srcdir@ logic with those. Since the replace
+ happens in slurp_options that cris already uses, we don't have any
+ logic to port over there. We have to duplicate that into the cris
+ slurp_rv helper though.
+
+2021-11-17 Mike Frysinger <vapier@gentoo.org>
+
+ sim: cris: drop custom "dynamic" test field
+ This tag is used to force tests to be built dynamically (i.e. without
+ -static linking). This is because cris-sim.exp in dejagnu turns on
+ static linking in ldflags.
+
+ The default configs and runtest flags shouldn't load these boards.
+ If these settings are still needed, we should figure out a different
+ way of suppressing the stock settings wholesale. We want these to
+ all pass out of the box with little to no configuration so that they
+ can run in a multitarget build.
+
+ With dropping "dynamic", it'll be easier to merge the custom cris
+ test logic with the common sim test logic.
+
+2021-11-17 Mike Frysinger <vapier@gentoo.org>
+
+ sim: testsuite: add more silent build rules
+ site.exp is still verbose, but that comes from automake, so have
+ to get it fixed upstream.
+
+2021-11-17 GDB Administrator <gdbadmin@sourceware.org>
+
+ Automatic date update in version.in
+
+2021-11-16 Sergei Trofimovich <siarheit@google.com>
+
+ sim: cr16: fix build on gcc-12 (NULL comparison)
+ On gcc-12 build fails as:
+
+ sim/cr16/interp.c: In function 'lookup_hash':
+ sim/cr16/interp.c:89:25: error:
+ the comparison will always evaluate as 'true'
+ for the address of 'mnimonic' will never be NULL [-Werror=address]
+ 89 | if ((h->ops->mnimonic != NULL) &&
+ | ^~
+
+ 'mnimonic' is a sharr array within ops. It can never be NULL.
+
+ While at it renamed 'mnimonic' to 'mnemonic'.
+
+2021-11-16 Simon Marchi <simon.marchi@polymtl.ca>
+
+ gdb: fix length of array view returned by some value_contents functions
+ In commit 50888e42dcd3 ("gdb: change functions returning value contents
+ to use gdb::array_view"), I believe I made a mistake with the length of
+ the array views returned by some functions. All functions return a view
+ of `TYPE_LENGTH (value_type (type))` length. This is not correct when
+ the value's enclosing type is larger than the value's type. In that
+ case, the value's contents buffer is of the size of the enclosing type,
+ and the value's actual contents is a slice of that (as returned by
+ value_contents). So, functions value_contents_all_raw,
+ value_contents_for_printing and value_contents_for_printing_const are
+ not correct. Since they are meant to return the value's contents buffer
+ as a whole, they should have the size of the enclosing type.
+
+ There is nothing that uses the returned array view size at the moment,
+ so this didn't cause a problem. But it became apparent when trying to
+ adjust some callers.
+
+ Change-Id: Ib4e8837e1069111d2b2784d3253d5f3002419e68
+
+2021-11-16 Fangrui Song <maskray@google.com>
+
+ readelf: Support SHT_RELR/DT_RELR for -r
+ The -r output for SHT_RELR looks like:
+
+ Relocation section '.relr.dyn' at offset 0x530 contains 4 entries:
+ 7 offsets
+ 00000000000028c0
+ 00000000000028c8
+ 0000000000003ad0
+ 0000000000003ad8
+ 0000000000003ae0
+ 0000000000003ae8
+ 0000000000003af0
+
+ For --use-dynamic, the header looks like
+
+ 'RELR' relocation section at offset 0x530 contains 32 bytes:
+
+ include/
+ * elf/common.h (DT_ENCODING): Bump to 38.
+ * elf/external.h (Elf32_External_Relr): New.
+ (Elf64_External_Relr): New.
+ binutils/
+ * readelf.c (enum relocation_type): New.
+ (slurp_relr_relocs): New.
+ (dump_relocations): Change is_rela to rel_type.
+ Dump RELR.
+ (dynamic_relocations): Add DT_RELR.
+ (process_relocs): Check SHT_RELR and DT_RELR.
+ (process_dynamic_section): Store into dynamic_info for
+ DT_RELR/DT_RELRENT/DT_RELRSZ.
+
+2021-11-16 Simon Marchi <simon.marchi@polymtl.ca>
+
+ gdbsupport: remove FUNCTION_NAME
+ __func__ is standard C++11:
+
+ https://en.cppreference.com/w/cpp/language/function
+
+ Also, in C++11, __func__ expands to the demangled function name, so the
+ mention in the comment above FUNCTION_NAME doesn't apply anymore.
+ Finally, in places where FUNCTION_NAME is used, I think it's enough to
+ print the function name, no need to print the whole signature.
+ Therefore, I propose to just remove FUNCTION_NAME and update users to
+ use the standard __func__.
+
+ Change-Id: I778f28155422b044402442dc18d42d0cded1017d
+
+2021-11-16 Andrew Burgess <aburgess@redhat.com>
+
+ gdb/gdbsupport: make xstrprintf and xstrvprintf return a unique_ptr
+ The motivation is to reduce the number of places where unmanaged
+ pointers are returned from allocation type routines. All of the
+ callers are updated.
+
+ There should be no user visible changes after this commit.
+
+2021-11-16 Andrew Burgess <aburgess@redhat.com>
+
+ gdbsupport: move xfree into its own file
+ In the next commit I'd like to reference gdb_unique_ptr within the
+ common-utils.h file. However, this requires that I include
+ gdb_unique_ptr.h, which requires that xfree be defined.
+
+ Interestingly, gdb_unique_ptr.h doesn't actually include anything that
+ defines xfree, but I was finding that when I added a gdb_unique_ptr.h
+ include to common-utils.h I was getting a dependency cycle; before my
+ change xfree was defined when gdb_unique_ptr.h was processed, while
+ after my change it was not, and this made g++ unhappy.
+
+ To break this cycle, I propose to move xfree into its own header file,
+ gdb-xfree.h, which I'll then include into gdb_unique_ptr.h and
+ common-utils.cc.
+
+2021-11-16 Andrew Burgess <aburgess@redhat.com>
+
+ gdb: throw OPTIMIZED_OUT_ERROR rather than GENERIC_ERROR
+ While reviewing this patch:
+
+ https://sourceware.org/pipermail/gdb-patches/2021-November/183227.html
+
+ I spotted that the patch could be improved if we threw
+ OPTIMIZED_OUT_ERROR rather than GENERIC_ERROR in a few places.
+
+ This commit updates error_value_optimized_out and
+ require_not_optimized_out to throw OPTIMIZED_OUT_ERROR.
+
+ I ran the testsuite and saw no regressions. This doesn't really
+ surprise me, we don't usually write code like:
+
+ catch (const gdb_exception_error &ex)
+ {
+ (if ex.error == GENERIC_ERROR)
+ ...
+ else
+ ...
+ }
+
+ There are a three places where we write something like:
+
+ catch (const gdb_exception_error &ex)
+ {
+ (if ex.error == OPTIMIZED_OUT_ERROR)
+ ...
+ }
+
+ In frame.c:unwind_pc, stack.c:info_frame_command_core, and
+ value.c:value_optimized_out, but if we are hitting these cases then
+ it's not significantly changing GDB's behaviour.
+
+2021-11-16 Tom Tromey <tromey@adacore.com>
+
+ Remove config.cache in gdbserver's "distclean"
+ PR gdb/28586 points out that "make distclean" fails to delete
+ config.cache from gdbserver/. This patch fixes the bug, and removes a
+ duplicate "Makefile" deletion that was also pointed out in the PR.
+
+2021-11-16 Tom de Vries <tdevries@suse.de>
+
+ [gdb/testsuite] Remove inferior output in gdb.base/foll-vfork.exp
+ Test-case gdb.base/foll-vfork.exp has inferior output that is not needed, but
+ which makes the regexp matching more difficult (see commit 1f28b70def1
+ "[gdb/testsuite] Fix regexp in gdb.base/foll-vfork.exp").
+
+ Remove the inferior output, and revert commit 1f28b70def1 to make the matching
+ more restrictive.
+
+ Tested on x86_64-linux.
+
+2021-11-16 H.J. Lu <hjl.tools@gmail.com>
+
+ x86: Don't allow KMOV in TLS code sequences
+ Don't allow KMOV in TLS code sequences which require integer MOV
+ instructions.
+
+ PR target/28595
+ * config/tc-i386.c (match_template): Don't allow KMOV in TLS
+ code sequences.
+ * testsuite/gas/i386/i386.exp: Run inval-tls and x86-64-inval-tls
+ tests.
+ * testsuite/gas/i386/inval-tls.l: New file.
+ * testsuite/gas/i386/inval-tls.s: Likewise.
+ * testsuite/gas/i386/x86-64-inval-tls.l: Likewise.
+ * testsuite/gas/i386/x86-64-inval-tls.s: Likewise.
+
+2021-11-16 Mike Frysinger <vapier@gentoo.org>
+
+ sim: run: support concise env var settings
+ Support the same syntax as other common utilities where env vars can
+ be specified before the program to be run without an explicit option.
+
+ This behavior can be suppressed by using the -- marker.
+
+2021-11-16 Mike Frysinger <vapier@gentoo.org>
+
+ sim: nrun: add --env-{set,unset,clear} command line options
+ Provide explicit control over the program's environment with the
+ basic set/unset/clear options. These are a bit clunky to use,
+ but they're functional.
+
+ The env set operation is split out into a separate function as it'll
+ be used in the next commit.
+
+ With these in place, we can adjust the custom cris testsuite to use
+ the now standard options and not its one-off hack.
+
+2021-11-16 Mike Frysinger <vapier@gentoo.org>
+
+ sim: syscall: hoist argc/argn/argnlen to common code
+ Now that the callback framework supports argv & envp, we can move
+ the Blackfin implementation of these syscalls to the common code.
+
+ sim: syscall: fix argvlen & argv implementation
+ Now that we have access to the argv & envp strings, finish implementing
+ these syscalls. Delete unused variables, fix tbuf by incrementing the
+ pointer instead of setting to the length, and make sure we don't write
+ more data than the bufsize says is available.
+
+ sim: callback: expose argv & environ
+ Pass the existing strings data to the callbacks so that common
+ libgloss syscalls can be implemented (which we'll do shortly).
+
+2021-11-16 Mike Frysinger <vapier@gentoo.org>
+
+ sim: keep track of program environment strings
+ We've been passing the environment strings to sim_create_inferior,
+ but most ports don't do anything with them. A few will use ad-hoc
+ logic to stuff the stack for user-mode programs, but that's it.
+
+ Let's formalize this across the board by storing the strings in the
+ normal sim state. This will allow (in future commits) supporting
+ more functionality in the run interface, and to unify some of the
+ libgloss syscalls.
+
+2021-11-16 Mike Frysinger <vapier@gentoo.org>
+
+ sim: iq2000: fix some missing prototypes warnings
+ Turns out some of these were hiding real bugs like not passing the
+ pc variable down.
+
+2021-11-16 jiawei <jiawei@iscas.ac.cn>
+
+ RISC-V: Scalar crypto instruction and entropy source CSR testcases.
+ Add testcases for Scalar Crypto extension, with total testcase contain all
+ instructions in k-ext/k-ext-64 and sub-extension testcase for zbk* zk*. Also
+ add testcase for new CSR name 'seed' which is the Entropy Source in zkr.
+
+ In fact these whole testcases can be combined into one file, after we have
+ supported the .option arch +-= directives.
+
+ gas/
+ * testsuite/gas/riscv/k-ext-64.d: New testcase for crypto instructions.
+ * testsuite/gas/riscv/k-ext-64.s: Likewise.
+ * testsuite/gas/riscv/k-ext.d: Likewise.
+ * testsuite/gas/riscv/k-ext.s: Likewise.
+ * testsuite/gas/riscv/zbkb-32.d: Likewise.
+ * testsuite/gas/riscv/zbkb-32.s: Likewise.
+ * testsuite/gas/riscv/zbkb-64.d: Likewise.
+ * testsuite/gas/riscv/zbkb-64.s: Likewise.
+ * testsuite/gas/riscv/zbkc-32.d: Likewise.
+ * testsuite/gas/riscv/zbkc-64.d: Likewise.
+ * testsuite/gas/riscv/zbkc.s: Likewise.
+ * testsuite/gas/riscv/zbkx-32.d: Likewise.
+ * testsuite/gas/riscv/zbkx-64.d: Likewise.
+ * testsuite/gas/riscv/zbkx.s: Likewise.
+ * testsuite/gas/riscv/zknd-32.d: Likewise.
+ * testsuite/gas/riscv/zknd-32.s: Likewise.
+ * testsuite/gas/riscv/zknd-64.d: Likewise.
+ * testsuite/gas/riscv/zknd-64.s: Likewise.
+ * testsuite/gas/riscv/zkne-32.d: Likewise.
+ * testsuite/gas/riscv/zkne-32.s: Likewise.
+ * testsuite/gas/riscv/zkne-64.d: Likewise.
+ * testsuite/gas/riscv/zkne-64.s: Likewise.
+ * testsuite/gas/riscv/zknh-32.d: Likewise.
+ * testsuite/gas/riscv/zknh-32.s: Likewise.
+ * testsuite/gas/riscv/zknh-64.d: Likewise.
+ * testsuite/gas/riscv/zknh-64.s: Likewise.
+ * testsuite/gas/riscv/zksed-32.d: Likewise.
+ * testsuite/gas/riscv/zksed-64.d: Likewise.
+ * testsuite/gas/riscv/zksed.s: Likewise.
+ * testsuite/gas/riscv/zksh-32.d: Likewise.
+ * testsuite/gas/riscv/zksh-64.d: Likewise.
+ * testsuite/gas/riscv/zksh.s: Likewise.
+ * testsuite/gas/riscv/priv-reg-fail-zkr.d: New testcase for zkr
+ csr check.
+ * testsuite/gas/riscv/priv-reg-fail-zkr.l: Likewise.
+ * testsuite/gas/riscv/priv-reg-fail-version-1p10.d: Updated march to
+ rv32if_zkr.
+ * testsuite/gas/riscv/priv-reg-fail-version-1p11.d: Likewise.
+ * testsuite/gas/riscv/priv-reg-fail-version-1p9p1.d: Likewise.
+ * testsuite/gas/riscv/priv-reg-version-1p10.d: Added Crypto seed csr.
+ * testsuite/gas/riscv/priv-reg-version-1p11.d: Likewise.
+ * testsuite/gas/riscv/priv-reg-version-1p9p1.d: Likewise.
+ * testsuite/gas/riscv/priv-reg.s: Likewise.
+
+2021-11-16 jiawei <jiawei@iscas.ac.cn>
+
+ RISC-V: Scalar crypto instructions and operand set.
+ Add instructions in k-ext, some instruction in zbkb, zbkc is reuse from
+ zbb,zbc, we just change the class attribute to make them both support.
+ The 'aes64ks1i' and 'aes64ks2' instructions are present in both the Zknd
+ and Zkne extensions on rv64. Add new operand letter 'y' to present 'bs'
+ symbol and 'Y' to present 'rnum' symbolc for zkn instructions. Also add
+ a new Entropy Source CSR define 'seed' located at address 0x015.
+
+ bfd/
+ * elfxx-riscv.c (riscv_multi_subset_supports): Added support for
+ crypto extension.
+ gas/
+ *config/tc-riscv.c (enum riscv_csr_class): Added CSR_CLASS_ZKR.
+ (riscv_csr_address): Checked for CSR_CLASS_ZKR.
+ (validate_riscv_insn): Added y and Y for bs and rnum operands.
+ (riscv_ip): Handle y and Y operands.
+ include/
+ * opcode/riscv-opc.h: Added encodings of crypto instructions.
+ Also defined new csr seed, which address is 0x15.
+ * opcode/riscv.h: Defined OP_* and INSN_CLASS_* for crypto.
+ opcodes/
+ * riscv-dis.c (print_insn_args): Recognized new y and Y operands.
+ * riscv-opc.c (riscv_opcodes): Added crypto instructions.
+
+2021-11-16 jiawei <jiawei@iscas.ac.cn>
+
+ RISC-V: Minimal support of scalar crypto extension.
+ Minimal support of scalar crypto extension, add "k" in the
+ riscv_supported_std_ext, to make the order check right with
+ "zk" behind "zb".
+
+ bfd/
+ * elfxx-riscv.c (riscv_implicit_subsets): Added implicit
+ rules for zk* extensions.
+ (riscv_supported_std_ext): Added entry for k.
+ (riscv_supported_std_z_ext): Added entries for zk*.
+
+2021-11-16 Simon Marchi <simon.marchi@efficios.com>
+
+ gdb: rework "set debuginfod" commands
+ As discussed here [1], do some re-work in the "set debuginfod commands".
+
+ First, use "set debuginfod enabled on/off/ask" instead of "set
+ debuginfod on/off/ask". This is more MI-friendly, and it gives an
+ output that makes more sense in "info set", for example.
+
+ Then, make the show commands not call "error" when debuginfod support is
+ not compiled in. This makes the commands "show" and "show debuginfod"
+ stop early, breaking gdb.base/default.exp:
+
+ Running /home/smarchi/src/binutils-gdb/gdb/testsuite/gdb.base/default.exp ...
+ FAIL: gdb.base/default.exp: info set
+ FAIL: gdb.base/default.exp: show
+
+ - Make the "debuginfod enabled" setting default to "off" when debuginfod
+ support is not compiled in, and "ask" otherwise.
+ - Make the setter of "debuginfod enabled" error out when debuginfod
+ support is not compiled in, so that "debuginfod enabled" will always
+ remain "off" in that case.
+ - Make the setter of "debuginfod verbose" work in any case. I don't
+ see the harm in letting the user change that setting, since the user will
+ hit an error if they try to enable the use of debuginfod.
+ - I would do the same for the "debuginfod urls" setter, but because
+ this one needs to see the DEBUGINFOD_URLS_ENV_VAR macro, provided by
+ libdebuginfod, I made that one error out as well if debuginfod
+ support is not compiled it (otherwise, I would have left it like
+ "debuginfod verbose". Alternatively, we could hard-code
+ "DEBUGINFOD_URLS" in the code (in fact, it was prior to this patch,
+ but I think it was an oversight, as other spots use
+ DEBUGINFOD_URLS_ENV_VAR), or use a dummy string to store the setting,
+ but I don't really see the value in that.
+
+ Rename debuginfod_enable to debuginfod_enabled, just so it matches the
+ setting name.
+
+ [1] https://sourceware.org/pipermail/gdb-patches/2021-October/182937.html
+
+ Change-Id: I45fdb2993f668226a5639228951362b7800f09d5
+ Co-Authored-By: Aaron Merey <amerey@redhat.com>
+
+2021-11-16 Simon Marchi <simon.marchi@polymtl.ca>
+
+ gdb: adjust gdbarch_tdep calls in nat files
+ Commit 345bd07cce33 ("gdb: fix gdbarch_tdep ODR violation") forgot to
+ update the gdbarch_tdep calls in the native files other than x86-64
+ Linux. This patch updates them all (to the best of my knowledge).
+ These are the files I was able to build-test:
+
+ aarch64-linux-nat.c
+ amd64-bsd-nat.c
+ arm-linux-nat.c
+ ppc-linux-nat.c
+ windows-nat.c
+ xtensa-linux-nat.c
+
+ And these are the ones I could not build-test:
+
+ aix-thread.c
+ arm-netbsd-nat.c
+ ppc-fbsd-nat.c
+ ppc-netbsd-nat.c
+ ia64-tdep.c (the part that needs libunwind)
+ ppc-obsd-nat.c
+ rs6000-nat.c
+
+ If there are still some build problems related to gdbarch_tdep in them,
+ they should be pretty obvious to fix.
+
+ Change-Id: Iaa3d791a850e4432973757598e634e3da6061428
+
+2021-11-16 Simon Marchi <simon.marchi@polymtl.ca>
+
+ gdb: remove unused variables in xtensa-linux-nat.c
+ While build-testing this file, the compiler complained about these two
+ unused variables, remove them.
+
+ Change-Id: I3c54f779f12c16ef6184af58aca75eaad042ce4e
+
+2021-11-16 Simon Marchi <simon.marchi@polymtl.ca>
+
+ gdb: add arc-newlib-tdep.c to ALL_TARGET_OBS
+ This file is currently not compiled in an --enable-targets=all build,
+ but it should be. Add it to ALL_TARGET_OBS.
+
+ Update the gdbarch_tdep call that commit 345bd07cce33 ("gdb: fix
+ gdbarch_tdep ODR violation") forgot to update.
+
+ Change-Id: I86248a01493eea5e70186e9c46a298ad3994b034
+
+2021-11-16 Jim Wilson <wilson@tuliptree.org>
+
+ Update my email address.
+ I've left SiFive and have a new gmail account because it is convenient
+ to use with git send-email. I'm planning to use this for my RISC-V
+ work. My tuliptree address still works, it just isn't as convenient.
+
+ binutils:
+ * MAINTAINERS (RISC-V): Update my address.
+
+2021-11-16 GDB Administrator <gdbadmin@sourceware.org>
+
+ Automatic date update in version.in
+
+2021-11-15 Tom de Vries <tdevries@suse.de>
+
+ [gdb] Don't use gdb_stdlog for inferior-events
+ The test-case gdb.base/foll-vfork.exp contains:
+ ...
+ if [gdb_debug_enabled] {
+ untested "debug is enabled"
+ return 0
+ }
+ ...
+
+ To understand what it does, I disabled this bit and ran with GDB_DEBUG=infrun,
+ like so:
+ ...
+ $ cd $build/gdb/testsuite
+ $ make check GDB_DEBUG=infrun RUNTESTFLAGS=gdb.base/foll-vfork.exp
+ ...
+ and ran into:
+ ...
+ (gdb) PASS: gdb.base/foll-vfork.exp: exec: \
+ vfork parent follow, through step: set follow-fork parent
+ next^M
+ 33 if (pid == 0) {^M
+ (gdb) FAIL: gdb.base/foll-vfork.exp: exec: \
+ vfork parent follow, through step: step
+ ...
+
+ The problem is that the test-case expects:
+ ...
+ (gdb) PASS: gdb.base/foll-vfork.exp: exec: \
+ vfork parent follow, through step: set follow-fork parent
+ next^M
+ [Detaching after vfork from child process 28169]^M
+ 33 if (pid == 0) {^M
+ (gdb) PASS: gdb.base/foll-vfork.exp: exec: \
+ vfork parent follow, through step: step
+ ...
+ but the "Detaching" line has been redirected to
+ $outputs/gdb.base/foll-vfork/gdb.debug.
+
+ I looked at the documentation of "set logging debugredirect [on|off]":
+ ...
+ By default, GDB debug output will go to both the terminal and the logfile.
+ Set debugredirect if you want debug output to go only to the log file.
+ ...
+ and my interpretation of it was that "debug output" did not match the
+ "messages" description of inferior-events:
+ ...
+ The set print inferior-events command allows you to enable or disable printing
+ of messages when GDB notices that new inferiors have started or that inferiors
+ have exited or have been detached.
+ ...
+
+ Fix the discrepancy by not using gdb_stdlog for inferior-events.
+
+ Update the gdb.base/foll-vfork.exp test-case to not require
+ gdb_debug_enabled == 0.
+
+ Tested on x86_64-linux.
+
+ Tested test-case gdb.base/foll-vfork.exp with and without GDB_DEBUG=infrun.
+
+2021-11-15 Roland McGrath <mcgrathr@google.com>
+
+ ld: Fix testsuite failures under --enable-textrel-check=error
+ ld/
+ * testsuite/ld-aarch64/dt_textrel.d: Pass explicit -z notext in
+ case ld was configured with --enable-textrel-check=error.
+ * testsuite/ld-aarch64/pr22764.d: Likewise.
+ * testsuite/ld-aarch64/pr20402.d: Likewise.
+
+2021-11-15 Luis Machado <luis.machado@linaro.org>
+
+ Extend the prologue analyzer to handle the bti instruction
+ Handle the BTI instruction in the prologue analyzer. The patch handles all
+ the variations of the BTI instruction.
+
+2021-11-15 Simon Marchi <simon.marchi@polymtl.ca>
+
+ gdb: fix gdbarch_tdep ODR violation
+ I would like to be able to use non-trivial types in gdbarch_tdep types.
+ This is not possible at the moment (in theory), because of the one
+ definition rule.
+
+ To allow it, rename all gdbarch_tdep types to <arch>_gdbarch_tdep, and
+ make them inherit from a gdbarch_tdep base class. The inheritance is
+ necessary to be able to pass pointers to all these <arch>_gdbarch_tdep
+ objects to gdbarch_alloc, which takes a pointer to gdbarch_tdep.
+
+ These objects are never deleted through a base class pointer, so I
+ didn't include a virtual destructor. In the future, if gdbarch objects
+ deletable, I could imagine that the gdbarch_tdep objects could become
+ owned by the gdbarch objects, and then it would become useful to have a
+ virtual destructor (so that the gdbarch object can delete the owned
+ gdbarch_tdep object). But that's not necessary right now.
+
+ It turns out that RISC-V already has a gdbarch_tdep that is
+ non-default-constructible, so that provides a good motivation for this
+ change.
+
+ Most changes are fairly straightforward, mostly needing to add some
+ casts all over the place. There is however the xtensa architecture,
+ doing its own little weird thing to define its gdbarch_tdep. I did my
+ best to adapt it, but I can't test those changes.
+
+ Change-Id: Ic001903f91ddd106bd6ca09a79dabe8df2d69f3b
+
+2021-11-15 Clément Chigot <clement.chigot@atos.net>
+
+ COFF: avoid modifications over C_FILE filename aux entries.
+ Commit e86fc4a5bc37 ("PR 28447: implement multiple parameters for .file
+ on XCOFF") introduces C_FILE entries which can store additional
+ information.
+ However, some modifications are needed by them but not by the original
+ C_FILE entries, usually representing the filename.
+ This patch ensures that filename entries are kept as is, in order to
+ protect targets not supporting the additional entries.
+
+ * coffgen.c (coff_write_symbol): Protect filename entries
+ (coff_write_symbols): Likewise.
+ (coff_print_symbol): Likewise.
+
+2021-11-15 Eric Botcazou <ebotcazou@gcc.gnu.org>
+
+ Deal with full path in .file 0 directive
+ Gas uses the directory part, if present, of the .file 0 directive to set
+ entry 0 of the directory table in DWARF 5, which represents the "current
+ directory".
+
+ Now Gas also uses the file part of the same directive to set entry 0 of the
+ file table, which represents the "current compilation file". But the latter
+ need not be located in the former so GCC will use a full path in the file
+ part when it is passed a full path:
+
+ gcc -c /full/path/test.c -save-temps
+
+ yields:
+
+ .file 0 "/current/directory" "/full/path/test.c"
+
+ in the assembly file and:
+
+ The Directory Table (offset 0x22, lines 2, columns 1):
+ Entry Name
+ 0 (indirect line string, offset: 0x25): /current/directory
+ 1 (indirect line string, offset: 0x38): /full/path
+
+ The File Name Table (offset 0x30, lines 2, columns 2):
+ Entry Dir Name
+ 0 0 (indirect line string, offset: 0x43): /full/path/test.c
+
+ in the object file. Note the full path and the questionable Dir value in
+ the 0 entry of the file table.
+
+2021-11-15 Mike Frysinger <vapier@gentoo.org>
+
+ sim: cris: make error message test a little more flexible
+ The point of this test is to just make sure the usage text is shown,
+ not the exact details of the usage text. So shorten the output test
+ to match the beginning. This fixes breakage when the output changed
+ slightly to include [--].
+
+ sim: run: fix crash in argc==0 error situation
+ The new argv processing code assumed that we were always passed a
+ command line. If we weren't, make sure we don't crash before we
+ get a chance to output an error message about incorrect usage.
+
+ sim: cris: touch up rvdummy handling
+ Add quiet build support and make sure it's removed with `make clean`.
+
+ sim: cris: replace custom "dest" test field with new --argv0
+ The #dest field used in the cris testsuite is a bit of hack to set the
+ argv[0] for the tests to read out later on. Now that the sim has an
+ option to set argv[0] explicitly, we don't need this custom field, so
+ let's drop it to harmonize the testsuites a little.
+
+ sim: run: add --argv0 option to control argv[0]
+ We default argv[0] to the program we run which is a standard *NIX
+ convention, but sometimes we want to be able to control the argv[0]
+ setting independently (especially for programs that inspect argv[0]
+ to change their behavior or output). Add an option to control it.
+
+2021-11-15 Mike Frysinger <vapier@gentoo.org>
+
+ sim: split program path out of argv vector
+ We use the program argv to both find the program to run (argv[0]) and
+ to hold the arguments to the program. Most of the time this is fine,
+ but if we want to let programs specify argv[0] independently (which is
+ possible in standard *NIX programs), this double duty doesn't work.
+
+ So let's split the path to the program to run out into a separate
+ field by itself. This simplifies the various sim_open funcs too.
+
+ By itself, this code is more of a logical cleanup than something that
+ is super useful. But it will open up customization of argv[0] in a
+ follow up commit. Split the changes to make it easier to review.
+
+2021-11-15 Mike Frysinger <vapier@gentoo.org>
+
+ sim: bfin: fix mach/xfail usage in tests
+ Set the mach to the right value all the time, and update xfail to
+ say the test fails on all targets. WIth multitarget testing, the
+ idea of target here doesn't make much sense.
+
+2021-11-15 Alan Modra <amodra@gmail.com>
+
+ -Waddress fixes for gold testsuite
+ Current mainline gcc.
+ common_test_1.c: In function 'main':
+ common_test_1.c:56:14: error: comparison between two arrays [-Werror=array-compare]
+ 56 | assert (c5 > c4);
+ | ^
+ common_test_1.c:56:14: note: use '&c5[0] > &c4[0]' to compare the addresses
+
+ * testsuite/common_test_1.c: Avoid -Waddress warnings.
+ * testsuite/common_test_1_v1.c: Likewise.
+ * testsuite/common_test_1_v2.c: Likewise.
+ * testsuite/script_test_2.cc: Likewise.
+
+2021-11-15 Alan Modra <amodra@gmail.com>
+
+ PowerPC64 @notoc in non-power10 code
+ R_PPC64_REL24_P9NOTOC is a variant of R_PPC64_REL24_NOTOC for use on
+ @notoc cals from non-power10 code in the rare case that using such a
+ construct is useful. R_PPC64_REL24_P9NOTOC will be emitted by gas
+ rather than R_PPC64_REL24_NOTOC when @notoc is used in a branch
+ instruction if power10 instructions are not enabled at that point.
+ The new relocation tells the linker to not use power10 instructions on
+ any stub emitted for that branch, unless overridden by
+ --power10-stubs=yes.
+
+ The current linker heuristic of only generating power10 instructions
+ for stubs if power10-only relocations are detected, continues to be
+ used.
+
+ include/
+ * elf/ppc64.h (R_PPC64_REL24_P9NOTOC): Define.
+ bfd/
+ * reloc.c (BFD_RELOC_PPC64_REL24_P9NOTOC): Define.
+ * elf64-ppc.c (ppc64_elf_howto_raw): Add entry for new reloc.
+ (ppc64_elf_reloc_type_lookup): Handle it.
+ (enum ppc_stub_type): Delete.
+ (enum ppc_stub_main_type, ppc_stub_sub_type): New.
+ (struct ppc_stub_type): New.
+ (struct ppc_stub_hash_entry): Use the above new type.
+ (struct ppc_link_hash_table): Update stub_count.
+ (is_branch_reloc, ppc64_elf_check_relocs),
+ (toc_adjusting_stub_needed): Handle new reloc.
+ (stub_hash_newfunc, select_alt_stub, ppc_merge_stub),
+ (ppc_type_of_stub, plt_stub_size, build_plt_stub),
+ (build_tls_get_addr_head, build_tls_get_addr_tail),
+ (ppc_build_one_stub, ppc_size_one_stub, ppc64_elf_size_stubs),
+ (ppc64_elf_build_stubs, ppc64_elf_relocate_section): Handle new
+ reloc. Modify stub handling to suit new scheme.
+ * bfd-in2.h: Regenerate.
+ * libbfd.h: Regenerate.
+ gas/
+ * config/tc-ppc.c (ppc_elf_suffix): When power10 is not enabled
+ return BFD_RELOC_PPC64_REL24_P9NOTOC for @notoc.
+ (fixup_size, ppc_force_relocation, ppc_fix_adjustable): Handle
+ BFD_RELOC_PPC64_REL24_P9NOTOC.
+ ld/
+ * testsuite/ld-powerpc/callstub-2.s: Add .machine power10.
+
+2021-11-15 Alan Modra <amodra@gmail.com>
+
+ Regenerate a couple of files
+ A couple of files changed on my latest --enable-maintainer-mode
+ build. ld/Makefile.in had a missing dependency but better sorting of
+ the loongson entries.
+
+ intl/
+ * configure: Regenerate.
+ ld/
+ * Makefile.am: Sort loongson entries.
+ * Makefile.in: Regenerate.
+
+2021-11-15 Pedro Alves <pedro@palves.net>
+
+ Fix build with current GCC: EL_EXPLICIT(location) always non-NULL
+ Compiling GDB with current GCC (1b4a63593b) runs into this:
+
+ src/gdb/location.c: In function 'int event_location_empty_p(const event_location*)':
+ src/gdb/location.c:963:38: error: the address of 'event_location::<unnamed union>::explicit_loc' will never be NULL [-Werror=address]
+ 963 | return (EL_EXPLICIT (location) == NULL
+ | ^
+ src/gdb/location.c:57:30: note: 'event_location::<unnamed union>::explicit_loc' declared here
+ 57 | struct explicit_location explicit_loc;
+ | ^~~~~~~~~~~~
+
+ GCC is right, EL_EXPLICIT is defined as returning the address of an
+ union field:
+
+ /* An explicit location. */
+ struct explicit_location explicit_loc;
+ #define EL_EXPLICIT(P) (&((P)->u.explicit_loc))
+
+ and thus must always be non-NULL.
+
+ Change-Id: Ie74fee7834495a93affcefce03c06e4d83ad8191
+
+2021-11-15 GDB Administrator <gdbadmin@sourceware.org>
+
+ Automatic date update in version.in
+
+2021-11-14 Lancelot SIX <lsix@lancelotsix.com>
+
+ [PR gdb/16238] Add completer for the show user command
+ The 'show user' command (which shows the definition of non-python/scheme
+ user defined commands) is currently missing a completer. This is
+ mentioned in PR 16238. Having one can improve the user experience.
+
+ In this commit I propose an implementation for such completer as well as
+ the associated tests.
+
+ Tested on x86_64 GNU/Linux.
+
+ All feedbacks are welcome.
+
+ Bug: https://sourceware.org/bugzilla/show_bug.cgi?id=16238
+
+2021-11-14 Alan Modra <amodra@gmail.com>
+
+ sync libbacktrace from gcc
+
+2021-11-14 GDB Administrator <gdbadmin@sourceware.org>
+
+ Automatic date update in version.in
+
+2021-11-13 H.J. Lu <hjl.tools@gmail.com>
+
+ Sync Makefile.tpl with GCC
+ * Makefile.tpl: Sync with GCC.
+ * Makefile.in: Regenerate.
+
+2021-11-13 Mike Frysinger <vapier@gentoo.org>
+
+ sim: sh: fix switch-bool warnings
+ This code triggers -Werror=switch-bool warnings with <=gcc-5 versions.
+ Rework it to use if statements instead as it also simplifies a bit.
+
+ sim: sh: rework carry checks to not rely on integer overflows
+ In <=gcc-7 versions, -fstrict-overflow is enabled by default, and that
+ triggers warnings in this code that relies on integer overflows to test
+ for carries. Change the logic to test against the limit directly.
+
+2021-11-13 GDB Administrator <gdbadmin@sourceware.org>
+
+ Automatic date update in version.in
+
+2021-11-12 Carl Love <cel@us.ibm.com>
+
+ Fix gdb.base/sigstep.exp test for ppc
+ The test stops at <signal_handler called> which is the call to the handler
+ rather than in the handler as intended. This patch replaces the
+ gdb_test "$enter_cmd to handler" with a gdb_test_multiple test. The multiple
+ test looks for the stop at <signal_handler called>. If found, the command
+ is issued again. The test passes if gdb stops in the handler as expected.
+
+ (gdb) PASS: gdb.base/sigstep.exp: stepi to handler, nothing in handler, step
+ from handler: continue to signal
+ stepi
+ <signal handler called>
+ 1: x/i $pc
+ => 0x7ffff7f80440 <__kernel_start_sigtramp_rt64>: bctrl
+ (gdb) stepi
+ handler (sig=551) at sigstep.c:32
+ 32 {
+ 1: x/i $pc
+ => 0x10000097c <handler>: addis r2,r12,2
+ (gdb) PASS: gdb.base/sigstep.exp: stepi to handler, nothing in handler,
+ step from handler: stepi to handler
+
+ Patch has been tested on x86_64-linux and ppc64le-linux with no test failures.
+
+2021-11-12 Tom de Vries <tdevries@suse.de>
+
+ [gdb/testsuite] Fix regexp in gdb.base/foll-vfork.exp
+ On OBS I ran into:
+ ...
+ (gdb) PASS: gdb.base/foll-vfork.exp: exit: \
+ vfork relations in info inferiors: continue to child exit
+ info inferiors^M
+ Num Description Connection Executable ^M
+ 1 <null> foll-vfork-exit ^M
+ * 2 <null> foll-vfork-exit ^M
+ (gdb) I'm the proud parent of child #5044!^M
+ FAIL: gdb.base/foll-vfork.exp: exit: vfork relations in info inferiors: \
+ vfork relation no longer appears in info inferiors (timeout)
+ ...
+
+ Fix this by removing the '$' anchor in the corresponding '$gdb_prompt $'
+ regexps.
+
+ Tested on x86_64-linux.
+
+2021-11-12 Alan Modra <amodra@gmail.com>
+
+ Don't compile some opcodes files when bfd is 32-bit only
+ * Makefile.am (TARGET_LIBOPCODES_CFILES): Split into..
+ (TARGET64_LIBOPCODES_CFILES): ..this and..
+ (TARGET32_LIBOPCODES_CFILES): ..this.
+ (ALL_MACHINES): Likewise split to
+ (ALL64_MACHINES, ALL32_MACHINES): ..this.
+ * disassemble.c: Define some ARCH_* when ARCH_all only if BFD64.
+ * configure.ac (BFD_MACHINES): Defined depending on BFD_ARCH_SIZE.
+ * Makefile.in: Regenerate.
+ * configure: Regenerate.
+
+ Import Makefile.def from gcc
+ * Makefile.def: Import from gcc.
+ * Makefile.in: Regenerate.
+
+2021-11-12 Alan Modra <amodra@gmail.com>
+
+ Fix demangle style usage info
+ Extract allowed styles from libiberty, so we don't have to worry about
+ our help messages getting out of date. The function probably belongs
+ in libiberty/cplus-dem.c but it can be here for a while to iron out
+ bugs.
+
+ PR 28581
+ * demanguse.c: New file.
+ * demanguse.h: New file.
+ * nm.c (usage): Break up output. Use display_demangler_styles.
+ * objdump.c (usage): Use display_demangler_styles.
+ * readelf.c (usage): Likewise.
+ * Makefile.am: Add demanguse.c and demanguse.h.
+ * Makefile.in: Regenerate.
+ * po/POTFILESin: Regenerate.
+
+2021-11-12 GDB Administrator <gdbadmin@sourceware.org>
+
+ Automatic date update in version.in
+
+2021-11-11 Simon Marchi <simon.marchi@efficios.com>
+
+ gdb: fix "set scheduler-locking" thread exit hang
+ GDB hangs when doing this:
+
+ - launch inferior with multiple threads
+ - multiple threads hit some breakpoint(s)
+ - one breakpoint hit is presented as a stop, the rest are saved as
+ pending wait statuses
+ - "set scheduler-locking on"
+ - resume the currently selected thread (because of scheduler-locking,
+ it's the only one resumed), let it execute until exit
+ - GDB hangs, not showing the prompt, impossible to interrupt with ^C
+
+ When the resumed thread exits, we expect the target to return a
+ TARGET_WAITKIND_NO_RESUMED event, and that's what we see:
+
+ [infrun] fetch_inferior_event: enter
+ [infrun] scoped_disable_commit_resumed: reason=handling event
+ [infrun] random_pending_event_thread: None found.
+ [Thread 0x7ffff7d9c700 (LWP 309357) exited]
+ [infrun] print_target_wait_results: target_wait (-1.0.0 [process -1], status) =
+ [infrun] print_target_wait_results: -1.0.0 [process -1],
+ [infrun] print_target_wait_results: status->kind = no-resumed
+ [infrun] handle_inferior_event: status->kind = no-resumed
+ [infrun] handle_no_resumed: TARGET_WAITKIND_NO_RESUMED (ignoring: found resumed)
+ [infrun] prepare_to_wait: prepare_to_wait
+ [infrun] reset: reason=handling event
+ [infrun] maybe_set_commit_resumed_all_targets: not requesting commit-resumed for target native, no resumed threads
+ [infrun] fetch_inferior_event: exit
+
+ The problem is in handle_no_resumed: we check if some other thread is
+ actually resumed, to see if we should ignore that event (see comments in
+ that function for more info). If this condition is true:
+
+ (thread->executing () || thread->has_pending_waitstatus ())
+
+ ... then we ignore the event. The problem is that there are some non-resumed
+ threads with a pending event, which makes us ignore the event. But these
+ threads are not resumed, so we end up waiting while nothing executes, hence
+ waiting for ever.
+
+ My first fix was to change the condition to:
+
+ (thread->executing ()
+ || (thread->resumed () && thread->has_pending_waitstatus ()))
+
+ ... but then it occured to me that we could simply check for:
+
+ (thread->resumed ())
+
+ Since "executing" implies "resumed", checking simply for "resumed"
+ covers threads that are resumed and executing, as well as threads that
+ are resumed with a pending status, which is what we want.
+
+ Change-Id: Ie796290f8ae7f34c026ca3a8fcef7397414f4780
+
+2021-11-11 Tom de Vries <tdevries@suse.de>
+
+ [gdb/build] Fix Wimplicit-exception-spec-mismatch in clang build
+ When building with clang 13 (and -std=gnu++17 to work around an issue in
+ string_view-selftests.c), we run into a few Wimplicit-exception-spec-mismatch
+ warnings:
+ ...
+ src/gdbsupport/new-op.cc:102:1: error: function previously declared with an \
+ explicit exception specification redeclared with an implicit exception \
+ specification [-Werror,-Wimplicit-exception-spec-mismatch]
+ operator delete (void *p)
+ ^
+ /usr/include/c++/11/new:130:6: note: previous declaration is here
+ void operator delete(void*) _GLIBCXX_USE_NOEXCEPT
+ ^
+ ...
+
+ These are due to recent commit 5fff6115fea "Fix
+ LD_PRELOAD=/usr/lib64/libasan.so.6 gdb".
+
+ Fix this by adding the missing noexcept.
+
+ Build on x86_64-linux, using gcc 7.5.0 and clang 13.0.0.
+
+2021-11-11 Tom de Vries <tdevries@suse.de>
+
+ [gdb/build] Fix build with -std=c++11
+ When building with -std=c++11, we run into two Werror=missing-declarations:
+ ...
+ new-op.cc: In function 'void operator delete(void*, std::size_t)':
+ new-op.cc:114:1: error: no previous declaration for \
+ 'void operator delete(void*, std::size_t)' [-Werror=missing-declarations]
+ operator delete (void *p, std::size_t) noexcept
+ ^~~~~~~~
+ new-op.cc: In function 'void operator delete [](void*, std::size_t)':
+ new-op.cc:132:1: error: no previous declaration for \
+ 'void operator delete [](void*, std::size_t)' [-Werror=missing-declarations]
+ operator delete[] (void *p, std::size_t) noexcept
+ ^~~~~~~~
+ ...
+
+ These are due to recent commit 5fff6115fea "Fix
+ LD_PRELOAD=/usr/lib64/libasan.so.6 gdb".
+
+ The declarations are provided by <new> (which is included) for c++14 onwards,
+ but they are missing for c++11.
+
+ Fix this by adding the missing declarations.
+
+ Tested on x86_64-linux, with gcc 7.5.0, both without (implying -std=gnu++14) and
+ with -std=c++11.
+
+2021-11-11 Tom de Vries <tdevries@suse.de>
+
+ [gdb/testsuite] Add gdb.arch/ppc64-break-on-_exit.exp
+ Add a regression test-case for commit a50bdb99afe "[gdb/tdep, rs6000] Don't
+ skip system call in skip_prologue":
+ - set a breakpoint on a local copy of glibc's _exit, and
+ - verify that it triggers.
+
+ The test-case uses an assembly file by default, but also has the possibility
+ to use a C source file instead.
+
+ Tested on ppc64le-linux. Verified that the test-case fails without
+ aforementioned commit, and passes with the commit. Both with assembly
+ and C source.
+
+2021-11-11 Nelson Chu <nelson.chu@sifive.com>
+
+ RISC-V: Dump objects according to the elf architecture attribute.
+ For now we should always generate the elf architecture attribute both for
+ elf and linux toolchains, so that we could dump the objects correctly
+ according to the generated architecture string. This patch resolves the
+ problem that we probably dump an object with c.nop instructions, but
+ in fact the c extension isn't allowed. Consider the following case,
+
+ nelson@LAPTOP-QFSGI1F2:~/test$ cat temp.s
+ .option norvc
+ .option norelax
+ .text
+ add a0, a0, a0
+ .byte 0x1
+ .balign 16
+ nelson@LAPTOP-QFSGI1F2:~/test$ ~/binutils-dev/build-elf32-upstream/build-install/bin/riscv32-unknown-elf-as temp.s -o temp.o
+ nelson@LAPTOP-QFSGI1F2:~/test$ ~/binutils-dev/build-elf32-upstream/build-install/bin/riscv32-unknown-elf-objdump -d temp.o
+
+ temp.o: file format elf32-littleriscv
+
+ Disassembly of section .text:
+
+ 00000000 <.text>:
+ 0: 00a50533 add a0,a0,a0
+ 4: 01 .byte 0x01
+ 5: 00 .byte 0x00
+ 6: 0001 nop
+ 8: 00000013 nop
+ c: 00000013 nop
+ nelson@LAPTOP-QFSGI1F2:~/test$ ~/binutils-dev/build-elf32-upstream/build-install/bin/riscv32-unknown-elf-readelf -A temp.o
+ Attribute Section: riscv
+ File Attributes
+ Tag_RISCV_arch: "rv32i2p0_m2p0_a2p0_f2p0_d2p0"
+
+ The c.nop at address 0x6 is generated for alignment, but since the rvc isn't
+ allowed for this object, dump it as a c.nop instruction looks wrong. After
+ applying this patch, I get the following result,
+
+ nelson@LAPTOP-QFSGI1F2:~/test$ ~/binutils-dev/build-elf32-upstream/build-install/bin/riscv32-unknown-elf-objdump -d temp.o
+
+ temp.o: file format elf32-littleriscv
+
+ Disassembly of section .text:
+
+ 00000000 <.text>:
+ 0: 00a50533 add a0,a0,a0
+ 4: 01 .byte 0x01
+ 5: 00 .byte 0x00
+ 6: 0001 .2byte 0x1
+ 8: 00000013 nop
+ c: 00000013 nop
+
+ For the current objdump, we dump data to .byte/.short/.word/.dword, and
+ dump the unknown or unsupported instructions to .2byte/.4byte/.8byte, which
+ respectively are 2, 4 and 8 bytes instructions. Therefore, we shouldn't
+ dump the 0x0001 as a c.nop instruction in the above case, we should dump
+ it to .2byte 0x1 as a unknown instruction, since the rvc is disabled.
+
+ However, consider that some people may use the new objdump to dump the old
+ objects, which don't have any elf attributes. We usually set the default
+ architecture string to rv64g by bfd/elfxx-riscv.c:riscv_set_default_arch.
+ But this will cause rvc instructions to be unrecognized. Therefore, we
+ set the default architecture string to rv64gc for disassembler, to keep
+ the previous behavior.
+
+ This patch pass the riscv-gnu-toolchain gcc/binutils regressions for
+ rv32emc-elf, rv32gc-linux, rv32i-elf, rv64gc-elf and rv64gc-linux
+ toolchains. Also, tested by --enable-targets=all and can build
+ riscv-gdb successfully.
+
+ bfd/
+ * elfnn-riscv.c (riscv_merge_arch_attr_info): Tidy the
+ codes for riscv_parse_subset_t setting.
+ * elfxx-riscv.c (riscv_get_default_ext_version): Updated.
+ (riscv_subset_supports): Moved from gas/config/tc-riscv.c.
+ (riscv_multi_subset_supports): Likewise.
+ * elfxx-riscv.h: Added extern for riscv_subset_supports and
+ riscv_multi_subset_supports.
+ gas/
+ * config/tc-riscv.c (riscv_subset_supports): Moved to
+ bfd/elfxx-riscv.c.
+ (riscv_multi_subset_supports): Likewise.
+ (riscv_rps_as): Defined for architectrue parser.
+ (riscv_set_arch): Updated.
+ (riscv_set_abi_by_arch): Likewise.
+ (riscv_csr_address): Likewise.
+ (reg_lookup_internal): Likewise.
+ (riscv_ip): Likewise.
+ (s_riscv_option): Updated.
+ * testsuite/gas/riscv/mapping-04b.d: Updated.
+ * testsuite/gas/riscv/mapping-norelax-03b.d: Likewise.
+ * testsuite/gas/riscv/mapping-norelax-04b.d: Likewise.
+ opcodes/
+ * riscv-dis.c: Include elfxx-riscv.h since we need the
+ architecture parser. Also removed the cpu-riscv.h, it
+ is already included in elfxx-riscv.h.
+ (default_isa_spec): Defined since the parser need this
+ to set the default architecture string.
+ (xlen): Moved out from riscv_disassemble_insn as a global
+ variable, it is more convenient to initialize riscv_rps_dis.
+ (riscv_subsets): Defined to recoed the supported
+ extensions.
+ (riscv_rps_dis): Defined for architectrue parser.
+ (riscv_disassemble_insn): Call riscv_multi_subset_supports
+ to make sure if the instructions are valid or not.
+ (print_insn_riscv): Initialize the riscv_subsets by parsing
+ the elf architectrue attribute. Otherwise, set the default
+ architectrue string to rv64gc.
+
+2021-11-11 Mike Frysinger <vapier@gentoo.org>
+
+ sim: testsuite: drop sim_compile cover function
+ Most code isn't using this, and the only call site (in one cris file)
+ can use target_compile directly. So switch it over to simplify.
+
+ sim: cris: stop testing a.out explicitly [ld/13900]
+ Since gcc dropped support for a.out starting with 4.4.0 in 2009, it's
+ been impossible to verify this code actually still works. Since it
+ crashes in ld, and it uses a config option that no other tests uses
+ and we want to remove, drop the test to avoid all the trouble.
+
+ sim: io: tweak compiler workaround with error output
+ Outputting an extra space broke a cris test. Change the workaround
+ to use %s with an empty string to avoid the compiler warning but not
+ output an extra space.
+
+ sim: testsuite: delete unused arm remote host logic
+ There's no need to sync testutils.inc with remote hosts. The one
+ we have in the source tree is all we need and only thing we test.
+ Delete it to simplify.
+
+ sim: synacor: simplify test generation
+ Objcopy was used to create a binary file of just the executable code
+ since the environment requires code to based at address 0. We can
+ accomplish the same thing with the -Ttext=0 flag, so switch to that
+ to get rid of custom logic.
+
+2021-11-11 GDB Administrator <gdbadmin@sourceware.org>
+
+ Automatic date update in version.in
+
+2021-11-10 Tom Tromey <tromey@adacore.com>
+
+ Handle PIE in .debug_loclists
+ Simon pointed out that my recent patches to .debug_loclists caused
+ some regressions. After a brief discussion we realized it was because
+ his system compiler defaults to PIE.
+
+ This patch changes this code to unconditionally apply the text offset
+ here. It also changes loclist_describe_location to work more like
+ dwarf2_find_location_expression.
+
+ I tested this by running the gdb.dwarf2 tests both with and without
+ -pie.
+
+2021-11-10 Przemyslaw Wirkus <przemyslaw.wirkus@arm.com>
+
+ arm: enable Cortex-A710 CPU
+ This patch is adding support for Cortex-A710 CPU in Arm.
+
+ bfd/
+
+ * cpu-arm.c (processors): Add cortex-a710.
+
+ gas/
+
+ * NEWS: Update docs.
+ * config/tc-arm.c (arm_cpus): Add cortex-a710 to -mcpu.
+ * doc/c-arm.texi: Update docs.
+ * testsuite/gas/arm/cpu-cortex-a710.d: New test.
+
+2021-11-10 Clément Chigot <clement.chigot@atos.net>
+
+ gdb: adjust x_file fields on COFF readers
+ Commit e86fc4a5bc37 ("PR 28447: implement multiple parameters for .file
+ on XCOFF") changes the structure associated to the internal
+ representation of files in COFF formats. However, gdb directory update
+ has been forgotten, leading to compilation errors of this kind:
+
+ CXX coffread.o
+ /home/simark/src/binutils-gdb/gdb/coffread.c: In function 'const char* coff_getfilename(internal_auxent*)':
+ /home/simark/src/binutils-gdb/gdb/coffread.c:1343:29: error: 'union internal_auxent::<unnamed struct>::<unnamed>' has no member named 'x_zeroes'
+ 1343 | if (aux_entry->x_file.x_n.x_zeroes == 0)
+ | ^~~~~~~~
+
+ Fix it by adjusting the COFF code in GDB.
+
+ Change-Id: I703fa134bc722d47515efbd72b88fa5650af6c3c
+
+2021-11-10 Tom de Vries <tdevries@suse.de>
+
+ [gdb/testsuite] Add gdb.opt/break-on-_exit.exp
+ Add a test-case to excercise the problem scenario reported in PR28527 and
+ fixed in commit a50bdb99afe "[gdb/tdep, rs6000] Don't skip system call in
+ skip_prologue":
+ - set a breakpoint on _exit, and
+ - verify that it triggers.
+
+ Note that this is not a regression test for that commit. Since the actual
+ code in _exit may vary across os instances, we cannot guarantee that the
+ problem will always trigger with this test-case.
+
+ Rather, this test-case is a version of the original test-case
+ (gdb.threads/process-dies-while-detaching.exp) that is minimal while still
+ reproducing the problem reported in PR28527, in that same setting.
+
+ The benefit of this test-case is that it exercise real-life code and may
+ expose similar problems in other settings. Also, it provides a much easier
+ test-case to investigate in case a similar problem occurs.
+
+ Tested on x86_64-linux and ppc64le-linux.
+
+2021-11-10 Mike Frysinger <vapier@gentoo.org>
+
+ sim: frv: flip trapdump default back to off
+ When I refactored this by scoping it to sim-frv-xxx in commit
+ e7954ef5e5ed90fb7d28c013518f4c2e6bcd20a1 ("sim: frv: scope the
+ unique configure flag"), I changed the default from off to on.
+ While the feature is nice for developers, it breaks a bunch of
+ tests which aren't expecting this extra output. So flip it back
+ to off by default.
+
+2021-11-10 Pekka Seppänen <pexu@sourceware.mail.kapsi.fi>
+
+ PR28575, readelf.c and strings.c use undefined type uint
+ Since --unicode support (commit b3aa80b45c4) both binutils/readelf.c
+ and binutils/strings.c use 'uint' in a few locations. It likely
+ should be 'unsigned int' since there isn't anything defining 'uint'
+ within binutils (besides zlib) and AFAIK it isn't a standard type.
+
+ * readelf.c (print_symbol): Replace uint with unsigned int.
+ * strings.c (string_min, display_utf8_char): Likewise.
+ (print_unicode_stream_body, print_unicode_stream): Likewise.
+ (print_strings): Likewise.
+ (get_unicode_byte): Wrap long line.
+
+2021-11-10 Clément Chigot <clement.chigot@atos.net>
+
+ ld: set correct flags for AIX shared tests
+ Previous flags were aimed to be run with XLC.
+ Nowadays, only GCC is being tested with GNU toolchain. Moreover,
+ recent XLC versions might also accept "-shared".
+
+ * testsuite/ld-shared/shared.exp: Adjust shared flags.
+
+2021-11-10 Clément Chigot <clement.chigot@atos.net>
+
+ PR 28447: implement multiple parameters for .file on XCOFF
+ On XCOFF, ".file" pseudo-op allows 3 extras parameters to provide
+ additional information to AIX linker, or its debugger. These are
+ stored in auxiliary entries of the C_FILE symbol.
+
+ bfd/
+ PR 28447
+ * coffcode.h (combined_entry_type): Add extrap field.
+ (coff_bigobj_swap_aux_in): Adjust names of x_file fields.
+ (coff_bigobj_swap_aux_out): Likewise.
+ * coffgen.c (coff_write_auxent_fname): New function.
+ (coff_fix_symbol_name): Write x_file using
+ coff_write_auxent_fname.
+ (coff_write_symbol): Likewise.
+ (coff_write_symbols): Add C_FILE auxiliary entries to
+ string table if needed.
+ (coff_get_normalized_symtab): Adjust names of x_file fields.
+ Normalize C_FILE auxiliary entries.
+ (coff_print_symbol): Print C_FILE auxiliary entries.
+ * coff-rs6000.c (_bfd_xcoff_swap_aux_in): Adjust names of
+ x_file fields.
+ (_bfd_xcoff_swap_aux_out): Likewise.
+ * coff64-rs6000.c (_bfd_xcoff64_swap_aux_in): Likewise.
+ (_bfd_xcoff64_swap_aux_out): Likewise.
+ * cofflink.c (_bfd_coff_final_link): Likewise.
+ (_bfd_coff_link_input_bfd): Likewise.
+ * coffswap.h (coff_swap_aux_in): Likewise.
+ * peXXigen.c (_bfd_XXi_swap_aux_in): Likewise.
+ (_bfd_XXi_swap_aux_out): Likewise.
+ * xcofflink.c (xcoff_link_input_bfd): Likewise.
+ * libcoff.h: Regenerate.
+ gas/
+ * config/tc-ppc.c (ppc_file): New function.
+ * config/tc-ppc.h (OBJ_COFF_MAX_AUXENTRIES): Change to 4.
+ * testsuite/gas/ppc/aix.exp: Add tests.
+ * testsuite/gas/ppc/xcoff-file-32.d: New test.
+ * testsuite/gas/ppc/xcoff-file-64.d: New test.
+ * testsuite/gas/ppc/xcoff-file.s: New test.
+ include/
+ * coff/internal.h (union internal_auxent): Change x_file to be a
+ struct instead of a union. Add x_ftype field.
+ * coff/rs6000.h (union external_auxent): Add x_resv field.
+ * coff/xcoff.h (XFT_FN): New define.
+ (XFT_CT): Likewise.
+ (XFT_CV): Likewise.
+ (XFT_CD): Likewise.
+
+2021-11-10 Kevin Buettner <kevinb@redhat.com>
+
+ Test case for Bug 28308
+ The purpose of this test is described in the comments in
+ dprintf-execution-x-script.exp.
+
+ Bug: https://sourceware.org/bugzilla/show_bug.cgi?id=28308
+
+ The name of this new test was based on that of an existing test,
+ bp-cmds-execution-x-script.exp. I started off by copying that test,
+ adding to it, and then rewriting almost all of it. It's different
+ enough that I decided that listing the copyright year as 2021
+ was sufficient.
+
+2021-11-10 Kevin Buettner <kevinb@redhat.com>
+
+ Fix PR 28308 - dprintf breakpoints not working when run from script
+ This commit fixes Bug 28308, titled "Strange interactions with
+ dprintf and break/commands":
+
+ Bug: https://sourceware.org/bugzilla/show_bug.cgi?id=28308
+
+ Since creating that bug report, I've found a somewhat simpler way of
+ reproducing the problem. I've encapsulated it into the GDB test case
+ which I've created along with this bug fix. The name of the new test
+ is gdb.base/dprintf-execution-x-script.exp, I'll demonstrate the
+ problem using this test case, though for brevity, I've placed all
+ relevant files in the same directory and have renamed the files to all
+ start with 'dp-bug' instead of 'dprintf-execution-x-script'.
+
+ The script file, named dp-bug.gdb, consists of the following commands:
+
+ dprintf increment, "dprintf in increment(), vi=%d\n", vi
+ break inc_vi
+ commands
+ continue
+ end
+ run
+
+ Note that the final command in this script is 'run'. When 'run' is
+ instead issued interactively, the bug does not occur. So, let's look
+ at the interactive case first in order to see the correct/expected
+ output:
+
+ $ gdb -q -x dp-bug.gdb dp-bug
+ ... eliding buggy output which I'll discuss later ...
+ (gdb) run
+ Starting program: /mesquite2/sourceware-git/f34-master/bld/gdb/tmp/dp-bug
+ vi=0
+ dprintf in increment(), vi=0
+
+ Breakpoint 2, inc_vi () at dprintf-execution-x-script.c:26
+ 26 in dprintf-execution-x-script.c
+ vi=1
+ dprintf in increment(), vi=1
+
+ Breakpoint 2, inc_vi () at dprintf-execution-x-script.c:26
+ 26 in dprintf-execution-x-script.c
+ vi=2
+ dprintf in increment(), vi=2
+
+ Breakpoint 2, inc_vi () at dprintf-execution-x-script.c:26
+ 26 in dprintf-execution-x-script.c
+ vi=3
+ [Inferior 1 (process 1539210) exited normally]
+
+ In this run, in which 'run' was issued from the gdb prompt (instead
+ of at the end of the script), there are three dprintf messages along
+ with three 'Breakpoint 2' messages. This is the correct output.
+
+ Now let's look at the output that I snipped above; this is the output
+ when 'run' is issued from the script loaded via GDB's -x switch:
+
+ $ gdb -q -x dp-bug.gdb dp-bug
+ Reading symbols from dp-bug...
+ Dprintf 1 at 0x40116e: file dprintf-execution-x-script.c, line 38.
+ Breakpoint 2 at 0x40113a: file dprintf-execution-x-script.c, line 26.
+ vi=0
+ dprintf in increment(), vi=0
+
+ Breakpoint 2, inc_vi () at dprintf-execution-x-script.c:26
+ 26 dprintf-execution-x-script.c: No such file or directory.
+ vi=1
+
+ Breakpoint 2, inc_vi () at dprintf-execution-x-script.c:26
+ 26 in dprintf-execution-x-script.c
+ vi=2
+
+ Breakpoint 2, inc_vi () at dprintf-execution-x-script.c:26
+ 26 in dprintf-execution-x-script.c
+ vi=3
+ [Inferior 1 (process 1539175) exited normally]
+
+ In the output shown above, only the first dprintf message is printed.
+ The 2nd and 3rd dprintf messages are missing! However, all three
+ 'Breakpoint 2...' messages are still printed.
+
+ Why does this happen?
+
+ bpstat_do_actions_1() in gdb/breakpoint.c contains the following
+ comment and code near the start of the function:
+
+ /* Avoid endless recursion if a `source' command is contained
+ in bs->commands. */
+ if (executing_breakpoint_commands)
+ return 0;
+
+ scoped_restore save_executing
+ = make_scoped_restore (&executing_breakpoint_commands, 1);
+
+ Also, as described by this comment prior to the 'async' field
+ in 'struct ui' in top.h, the main UI starts off in sync mode
+ when processing command line arguments:
+
+ /* True if the UI is in async mode, false if in sync mode. If in
+ sync mode, a synchronous execution command (e.g, "next") does not
+ return until the command is finished. If in async mode, then
+ running a synchronous command returns right after resuming the
+ target. Waiting for the command's completion is later done on
+ the top event loop. For the main UI, this starts out disabled,
+ until all the explicit command line arguments (e.g., `gdb -ex
+ "start" -ex "next"') are processed. */
+
+ This combination of things, the state of the static global
+ 'executing_breakpoint_commands' plus the state of the async
+ field in the main UI causes this behavior.
+
+ This is a backtrace after hitting the dprintf breakpoint for
+ the second time when doing 'run' from the script file, i.e.
+ non-interactively:
+
+ Thread 1 "gdb" hit Breakpoint 3, bpstat_do_actions_1 (bsp=0x7fffffffc2b8)
+ at /ironwood1/sourceware-git/f34-master/bld/../../worktree-master/gdb/breakpoint.c:4431
+ 4431 if (executing_breakpoint_commands)
+
+ #0 bpstat_do_actions_1 (bsp=0x7fffffffc2b8)
+ at gdb/breakpoint.c:4431
+ #1 0x00000000004d8bc6 in dprintf_after_condition_true (bs=0x1538090)
+ at gdb/breakpoint.c:13048
+ #2 0x00000000004c5caa in bpstat_stop_status (aspace=0x116dbc0, bp_addr=0x40116e, thread=0x137f450, ws=0x7fffffffc718,
+ stop_chain=0x1538090) at gdb/breakpoint.c:5498
+ #3 0x0000000000768d98 in handle_signal_stop (ecs=0x7fffffffc6f0)
+ at gdb/infrun.c:6172
+ #4 0x00000000007678d3 in handle_inferior_event (ecs=0x7fffffffc6f0)
+ at gdb/infrun.c:5662
+ #5 0x0000000000763cd5 in fetch_inferior_event ()
+ at gdb/infrun.c:4060
+ #6 0x0000000000746d7d in inferior_event_handler (event_type=INF_REG_EVENT)
+ at gdb/inf-loop.c:41
+ #7 0x00000000007a702f in handle_target_event (error=0, client_data=0x0)
+ at gdb/linux-nat.c:4207
+ #8 0x0000000000b8cd6e in gdb_wait_for_event (block=block@entry=0)
+ at gdbsupport/event-loop.cc:701
+ #9 0x0000000000b8d032 in gdb_wait_for_event (block=0)
+ at gdbsupport/event-loop.cc:597
+ #10 gdb_do_one_event () at gdbsupport/event-loop.cc:212
+ #11 0x00000000009d19b6 in wait_sync_command_done ()
+ at gdb/top.c:528
+ #12 0x00000000009d1a3f in maybe_wait_sync_command_done (was_sync=0)
+ at gdb/top.c:545
+ #13 0x00000000009d2033 in execute_command (p=0x7fffffffcb18 "", from_tty=0)
+ at gdb/top.c:676
+ #14 0x0000000000560d5b in execute_control_command_1 (cmd=0x13b9bb0, from_tty=0)
+ at gdb/cli/cli-script.c:547
+ #15 0x000000000056134a in execute_control_command (cmd=0x13b9bb0, from_tty=0)
+ at gdb/cli/cli-script.c:717
+ #16 0x00000000004c3bbe in bpstat_do_actions_1 (bsp=0x137f530)
+ at gdb/breakpoint.c:4469
+ #17 0x00000000004c3d40 in bpstat_do_actions ()
+ at gdb/breakpoint.c:4533
+ #18 0x00000000006a473a in command_handler (command=0x1399ad0 "run")
+ at gdb/event-top.c:624
+ #19 0x00000000009d182e in read_command_file (stream=0x113e540)
+ at gdb/top.c:443
+ #20 0x0000000000563697 in script_from_file (stream=0x113e540, file=0x13bb0b0 "dp-bug.gdb")
+ at gdb/cli/cli-script.c:1642
+ #21 0x00000000006abd63 in source_gdb_script (extlang=0xc44e80 <extension_language_gdb>, stream=0x113e540,
+ file=0x13bb0b0 "dp-bug.gdb") at gdb/extension.c:188
+ #22 0x0000000000544400 in source_script_from_stream (stream=0x113e540, file=0x7fffffffd91a "dp-bug.gdb",
+ file_to_open=0x13bb0b0 "dp-bug.gdb")
+ at gdb/cli/cli-cmds.c:692
+ #23 0x0000000000544557 in source_script_with_search (file=0x7fffffffd91a "dp-bug.gdb", from_tty=1, search_path=0)
+ at gdb/cli/cli-cmds.c:750
+ #24 0x00000000005445cf in source_script (file=0x7fffffffd91a "dp-bug.gdb", from_tty=1)
+ at gdb/cli/cli-cmds.c:759
+ #25 0x00000000007cf6d9 in catch_command_errors (command=0x5445aa <source_script(char const*, int)>,
+ arg=0x7fffffffd91a "dp-bug.gdb", from_tty=1, do_bp_actions=false)
+ at gdb/main.c:523
+ #26 0x00000000007cf85d in execute_cmdargs (cmdarg_vec=0x7fffffffd1b0, file_type=CMDARG_FILE, cmd_type=CMDARG_COMMAND,
+ ret=0x7fffffffd18c) at gdb/main.c:615
+ #27 0x00000000007d0c8e in captured_main_1 (context=0x7fffffffd3f0)
+ at gdb/main.c:1322
+ #28 0x00000000007d0eba in captured_main (data=0x7fffffffd3f0)
+ at gdb/main.c:1343
+ #29 0x00000000007d0f25 in gdb_main (args=0x7fffffffd3f0)
+ at gdb/main.c:1368
+ #30 0x00000000004186dd in main (argc=5, argv=0x7fffffffd508)
+ at gdb/gdb.c:32
+
+ There are two frames for bpstat_do_actions_1(), one at frame #16 and
+ the other at frame #0. The one at frame #16 is processing the actions
+ for Breakpoint 2, which is a 'continue'. The one at frame #0 is attempting
+ to process the dprintf breakpoint action. However, at this point,
+ the value of 'executing_breakpoint_commands' is 1, forcing an early
+ return, i.e. prior to executing the command(s) associated with the dprintf
+ breakpoint.
+
+ For the sake of comparison, this is what the stack looks like when hitting
+ the dprintf breakpoint for the second time when issuing the 'run'
+ command from the GDB prompt.
+
+ Thread 1 "gdb" hit Breakpoint 3, bpstat_do_actions_1 (bsp=0x7fffffffccd8)
+ at /ironwood1/sourceware-git/f34-master/bld/../../worktree-master/gdb/breakpoint.c:4431
+ 4431 if (executing_breakpoint_commands)
+
+ #0 bpstat_do_actions_1 (bsp=0x7fffffffccd8)
+ at gdb/breakpoint.c:4431
+ #1 0x00000000004d8bc6 in dprintf_after_condition_true (bs=0x16b0290)
+ at gdb/breakpoint.c:13048
+ #2 0x00000000004c5caa in bpstat_stop_status (aspace=0x116dbc0, bp_addr=0x40116e, thread=0x13f0e60, ws=0x7fffffffd138,
+ stop_chain=0x16b0290) at gdb/breakpoint.c:5498
+ #3 0x0000000000768d98 in handle_signal_stop (ecs=0x7fffffffd110)
+ at gdb/infrun.c:6172
+ #4 0x00000000007678d3 in handle_inferior_event (ecs=0x7fffffffd110)
+ at gdb/infrun.c:5662
+ #5 0x0000000000763cd5 in fetch_inferior_event ()
+ at gdb/infrun.c:4060
+ #6 0x0000000000746d7d in inferior_event_handler (event_type=INF_REG_EVENT)
+ at gdb/inf-loop.c:41
+ #7 0x00000000007a702f in handle_target_event (error=0, client_data=0x0)
+ at gdb/linux-nat.c:4207
+ #8 0x0000000000b8cd6e in gdb_wait_for_event (block=block@entry=0)
+ at gdbsupport/event-loop.cc:701
+ #9 0x0000000000b8d032 in gdb_wait_for_event (block=0)
+ at gdbsupport/event-loop.cc:597
+ #10 gdb_do_one_event () at gdbsupport/event-loop.cc:212
+ #11 0x00000000007cf512 in start_event_loop ()
+ at gdb/main.c:421
+ #12 0x00000000007cf631 in captured_command_loop ()
+ at gdb/main.c:481
+ #13 0x00000000007d0ebf in captured_main (data=0x7fffffffd3f0)
+ at gdb/main.c:1353
+ #14 0x00000000007d0f25 in gdb_main (args=0x7fffffffd3f0)
+ at gdb/main.c:1368
+ #15 0x00000000004186dd in main (argc=5, argv=0x7fffffffd508)
+ at gdb/gdb.c:32
+
+ This relatively short backtrace is due to the current UI's async field
+ being set to 1.
+
+ Yet another thing to be aware of regarding this problem is the
+ difference in the way that commands associated to dprintf breakpoints
+ versus regular breakpoints are handled. While they both use a command
+ list associated with the breakpoint, regular breakpoints will place
+ the commands to be run on the bpstat chain constructed in
+ bp_stop_status(). These commands are run later on. For dprintf
+ breakpoints, commands are run via the 'after_condition_true' function
+ pointer directly from bpstat_stop_status(). (The 'commands' field in
+ the bpstat is cleared in dprintf_after_condition_true(). This
+ prevents the dprintf commands from being run again later on when other
+ commands on the bpstat chain are processed.)
+
+ Another thing that I noticed is that dprintf breakpoints are the only
+ type of breakpoint which use 'after_condition_true'. This suggests
+ that one possible way of fixing this problem, that of making dprintf
+ breakpoints work more like regular breakpoints, probably won't work.
+ (I must admit, however, that my understanding of this code isn't
+ complete enough to say why. I'll trust that whoever implemented it
+ had a good reason for doing it this way.)
+
+ The comment referenced earlier regarding 'executing_breakpoint_commands'
+ states that the reason for checking this variable is to avoid
+ potential endless recursion when a 'source' command appears in
+ bs->commands. We know that a dprintf command is constrained to either
+ 1) execution of a GDB printf command, 2) an inferior function call of
+ a printf-like function, or 3) execution of an agent-printf command.
+ Therefore, infinite recursion due to a 'source' command cannot happen
+ when executing commands upon hitting a dprintf breakpoint.
+
+ I chose to fix this problem by having dprintf_after_condition_true()
+ directly call execute_control_commands(). This means that it no
+ longer attempts to go through bpstat_do_actions_1() avoiding the
+ infinite recursion check for potential 'source' commands on the
+ command chain. I think it simplifies this code a little bit too, a
+ definite bonus.
+
+ Summary:
+
+ * breakpoint.c (dprintf_after_condition_true): Don't call
+ bpstat_do_actions_1(). Call execute_control_commands()
+ instead.
+
+2021-11-10 Alan Modra <amodra@gmail.com>
+
+ Re: Add --unicode option
+ * objdump: Whitespace fixes.
+ (long_options): Correct "ctf" entry.
+
+2021-11-10 Alan Modra <amodra@gmail.com>
+
+ Re: Add --unicode option
+ At low optimisation levels gcc may warn.
+
+ * strings.c (print_unicode_stream_body): Avoid bogus "may be
+ used unitialised" warning.
+
+2021-11-10 GDB Administrator <gdbadmin@sourceware.org>
+
+ Automatic date update in version.in
+
+2021-11-09 Alan Modra <amodra@gmail.com>
+
+ PR28543, readelf entered an infinite loop
+ This little tweak terminates fuzzed binary readelf output a little
+ quicker.
+
+ PR 28543
+ * dwarf.c (read_and_display_attr_value): Consume a byte when
+ form is unrecognized.
+
+2021-11-09 Alan Modra <amodra@gmail.com>
+
+ PR28542, Undefined behaviours in readelf.c
+ PR 28542
+ * readelf.c (dump_relocations): Check that section headers have
+ been read before attempting to access section name.
+ (print_dynamic_symbol): Likewise.
+ (process_mips_specific): Delete dead code.
+
+2021-11-09 Pedro Alves <pedro@palves.net>
+
+ gdb::array_view slicing/container selftest - test std::array too
+ Change-Id: I2141b0b8a09f6521a59908599eb5ba1a19b18dc6
+
+2021-11-09 Simon Marchi <simon.marchi@efficios.com>
+
+ gdb.debuginfod/fetch_src_and_symbols.exp: fix when GDB is built with AddressSanitizer
+ This test fails for me, showing:
+
+ ERROR: tcl error sourcing /home/smarchi/src/binutils-gdb/gdb/testsuite/gdb.debuginfod/fetch_src_and_symbols.exp.
+ ERROR: This GDB was configured as follows:
+ configure --host=x86_64-pc-linux-gnu --target=x86_64-pc-linux-gnu
+ --with-auto-load-dir=$debugdir:$datadir/auto-load
+ --with-auto-load-safe-path=$debugdir:$datadir/auto-load
+ ... and much more ...
+
+ The problem is that TCL's exec throws an error as soon as the exec'ed
+ process outputs on stderr. When GDB is built with ASan, it prints some
+ warnings about pre-existing signal handlers:
+
+ warning: Found custom handler for signal 7 (Bus error) preinstalled.
+ warning: Found custom handler for signal 8 (Floating point exception) preinstalled.
+ warning: Found custom handler for signal 11 (Segmentation fault) preinstalled.
+
+ Pass --quiet to GDB to avoid these warnings.
+
+ Change-Id: I3751d89b9b1df646da19149d7cb86775e2d3e80f
+
+2021-11-09 Tom Tromey <tromey@adacore.com>
+
+ Correctly handle DW_LLE_start_end
+ When the code to handle DW_LLE_start_end was added (as part of some
+ DWARF 5 work), it was written to add the base address. However, this
+ seems incorrect -- the DWARF standard describes this as an address,
+ not an offset from the base address.
+
+ This patch changes a couple of spots in dwarf2/loc.c to fix this
+ problem. It then changes decode_debug_loc_addresses to return
+ DEBUG_LOC_OFFSET_PAIR instead, which preserves the previous semantics.
+
+ This only showed up on the RISC-V target internally, due to the
+ combination of DWARF 5 and a newer version of GCC. I've updated a
+ couple of existing loclists test cases to demonstrate the bug.
+
+2021-11-09 Tom Tromey <tromey@adacore.com>
+
+ Fix build on rhES5
+ The rhES5 build failed due to an upstream import a while back. The
+ bug here is that, while the 'personality' function exists,
+ ADDR_NO_RANDOMIZE is only defined in <linux/personality.h>, not
+ <sys/personality.h>.
+
+ However, <linux/personality.h> does not declare the 'personality'
+ function, and <sys/personality.h> and <linux/personality.h> cannot
+ both be included.
+
+ This patch restores one of the removed configure checks and updates
+ the code to check it.
+
+ We had this as a local patch at AdaCore, because it seemed like there
+ was no interest upstream. However, now it turns out that this fixes
+ PR build/28555, so I'm sending it now.
+
+2021-11-09 H.J. Lu <hjl.tools@gmail.com>
+
+ doc/ctf-spec.texi: Remove "@validatemenus off"
+ Remove @validatemenus from ctf-spec.texi, which has been removed from
+ texinfo by
+
+ commit a16dd1a9ece08568a1980b9a65a3a9090717997f
+ Author: Gavin Smith <gavinsmith0123@gmail.com>
+ Date: Mon Oct 12 16:32:37 2020 +0100
+
+ * doc/texinfo.texi
+ (Writing a Menu, Customization Variables for @-Commands)
+ (Command List),
+ * doc/refcard/txirefcard.tex
+ Remove @validatemenus.
+ * tp/Texinfo/XS/Makefile.am (command_ids.h): Use gawk instead
+ of awk. Avoid discouraged "$p" usage, using "$(p)" instead.
+ * tp/Texinfo/XS/configure.ac: Check for gawk.
+
+ commit 128acab3889b51809dc3bd3c6c74b61d13f7f5f4
+ Author: Gavin Smith <gavinsmith0123@gmail.com>
+ Date: Thu Jan 3 14:51:53 2019 +0000
+
+ Update refcard.
+
+ * doc/refcard/txirefcard.tex: @setfilename is no longer
+ mandatory. Do not mention @validatemenus or explicitly giving
+ @node pointers, as these are not very important features.
+
+ PR libctf/28567
+ * doc/ctf-spec.texi: Remove "@validatemenus off".
+
+2021-11-09 Nick Clifton <nickc@redhat.com>
+
+ Add --unicode option to control how unicode characters are handled by display tools.
+ * nm.c: Add --unicode option to control how unicode characters are
+ handled.
+ * objdump.c: Likewise.
+ * readelf.c: Likewise.
+ * strings.c: Likewise.
+ * binutils.texi: Document the new feature.
+ * NEWS: Document the new feature.
+ * testsuite/binutils-all/unicode.exp: New file.
+ * testsuite/binutils-all/nm.hex.unicode
+ * testsuite/binutils-all/strings.escape.unicode
+ * testsuite/binutils-all/objdump.highlight.unicode
+ * testsuite/binutils-all/readelf.invalid.unicode
+
+2021-11-09 Mike Frysinger <vapier@gentoo.org>
+
+ sim: sh: simplify testsuite a bit
+ Switch from the centralized list in the exp file to each test declaring
+ its own requirements which they're already (mostly) doing. This will
+ increase coverage slightly by running more tests in more configurations
+ since the hardcoded exp list was a little out of date.
+
+ We have to mark the psh* tests as shdsp only (to match what the exp
+ file was doing), mark the fsca & fsrra tests as failing (since they
+ weren't even being run by the exp file), and to fix the expected
+ output & status of the fail test.
+
+2021-11-09 Mike Frysinger <vapier@gentoo.org>
+
+ sim: cris: clean up missing func prototype warnings
+ Move some unused funcs under existing #if 0 protection, mark a few
+ local funcs as static, and add missing prototypes for the rest which
+ are used from other files. This fixes all the fatal warnings in the
+ mloop files so we can turn -Werror on here fully.
+
+2021-11-09 GDB Administrator <gdbadmin@sourceware.org>
+
+ Automatic date update in version.in
+
+2021-11-08 Lancelot SIX <lsix@lancelotsix.com>
+
+ Improve gdb::array_view ctor from contiguous containers
+ While reading the interface of gdb::array_view, I realized that the
+ constructor that builds an array_view on top of a contiguous container
+ (such as std::vector, std::array or even gdb::array_view) can be
+ missused.
+
+ Lets consider the following code sample:
+
+ struct Parent
+ {
+ Parent (int a): a { a } {}
+ int a;
+ };
+
+ std::ostream &operator<< (std::ostream& os, const Parent & p)
+ { os << "Parent {a=" << p.a << "}"; return os; }
+
+ struct Child : public Parent
+ {
+ Child (int a, int b): Parent { a }, b { b } {}
+ int b;
+ };
+
+ std::ostream &operator<< (std::ostream& os, const Child & p)
+ { os << "Child {a=" << p.a << ", b=" << p.b << "}"; return os; }
+
+ template <typename T>
+ void print (const gdb::array_view<const T> &p)
+ {
+ std::for_each (p.begin (), p.end (), [](const T &p) { std::cout << p << '\n'; });
+ }
+
+ Then with the current interface nothinng prevents this usage of
+ array_view to be done:
+
+ const std::array<Child, 3> elts = {
+ Child {1, 2},
+ Child {3, 4},
+ Child {5, 6}
+ };
+ print_all<Parent> (elts);
+
+ This compiles fine and produces the following output:
+
+ Parent {a=1}
+ Parent {a=2}
+ Parent {a=3}
+
+ which is obviously wrong. There is nowhere in memory a Parent-like
+ object for which the A member is 2 and this call to print_all<Parent>
+ shold not compile at all (calling print_all<Child> is however fine).
+
+ This comes down to the fact that a Child* is convertible into a Parent*,
+ and that an array view is constructed to a pointer to the first element
+ and a size. The valid type pointed to that can be used with this
+ constructor are restricted using SFINAE, which requires that a
+ pointer to a member into the underlying container can be converted into a
+ pointer the array_view's data type.
+
+ This patch proposes to change the constraints on the gdb::array_view
+ ctor which accepts a container now requires that the (decayed) type of
+ the elements in the container match the (decayed) type of the array_view
+ being constructed.
+
+ Applying this change required minimum adjustment in GDB codebase, which
+ are also included in this patch.
+
+ Tested by rebuilding.
+
+2021-11-08 Lancelot SIX <lsix@lancelotsix.com>
+
+ Add a const version of gdb_argv:as_array_view
+ This commits adds const versions for the GET and AS_ARRAX_VIEW methods
+ of gdb_argv. Those methods will be required in the following patch of
+ the series.
+
+2021-11-08 Simon Marchi <simon.marchi@polymtl.ca>
+
+ gdb: fix nulltr -> nullptr typo
+ Change-Id: I04403bd85ec3fa75ea14130d68daba675a2a8aeb
+
+2021-11-08 Simon Marchi <simon.marchi@polymtl.ca>
+
+ gdb: tweak scoped_disable_commit_resumed uses when resuming all threads in non-stop
+ When doing "continue -a" in non-stop mode, each thread is individually
+ resumed while the commit resumed state is enabled. This forces the
+ target to commit each resumption immediately, instead of being able to
+ batch things.
+
+ The reason is that there is no scoped_disable_commit_resumed around the
+ loop over threads in continue_1, when "non_stop && all_threads" is true.
+ Since the proceed function is called once for each thread, the
+ scoped_disable_commit_resumed in proceed therefore forces commit-resumed
+ between each thread resumption. Add the necessary
+ scoped_disable_commit_resumed in continue_1 to avoid that.
+
+ I looked at the MI side of things, the function exec_continue, and found
+ that it was correct. There is a similar iteration over threads, and
+ there is a scoped_disable_commit_resumed at the function scope. This is
+ not wrong, but a bit more than we need. The branches that just call
+ continue_1 do not need it, as continue_1 takes care of disabling commit
+ resumed. So, move the scoped_disable_commit_resumed to the inner scope
+ where we iterate on threads and proceed them individually.
+
+ Here's an example debugging a multi-threaded program attached by
+ gdbserver (debug output trimmed for brevity):
+
+ $ ./gdb -nx -q --data-directory=data-directory -ex "set non-stop" -ex "tar rem :1234"
+ (gdb) set debug remote
+ (gdb) set debug infrun
+ (gdb) c -a
+ Continuing.
+ [infrun] proceed: enter
+ [infrun] scoped_disable_commit_resumed: reason=proceeding
+ [remote] Sending packet: $vCont;c:p14388.14388#90
+ [infrun] reset: reason=proceeding
+ [infrun] maybe_set_commit_resumed_all_targets: enabling commit-resumed for target remote
+ [infrun] maybe_call_commit_resumed_all_targets: calling commit_resumed for target remote
+ [infrun] proceed: exit
+ [infrun] proceed: enter
+ [infrun] scoped_disable_commit_resumed: reason=proceeding
+ [remote] Sending packet: $vCont;c:p14388.1438a#b9
+ [infrun] reset: reason=proceeding
+ [infrun] maybe_set_commit_resumed_all_targets: enabling commit-resumed for target remote
+ [infrun] maybe_call_commit_resumed_all_targets: calling commit_resumed for target remote
+ [infrun] proceed: exit
+ ... and so on for each thread ...
+
+ Notice how we send one vCont;c for each thread. With the patch applied, we
+ send a single vCont;c at the end:
+
+ [infrun] scoped_disable_commit_resumed: reason=continue all threads in non-stop
+ [infrun] proceed: enter
+ [infrun] scoped_disable_commit_resumed: reason=proceeding
+ [infrun] reset: reason=proceeding
+ [infrun] proceed: exit
+ [infrun] clear_proceed_status_thread: Thread 85790.85792
+ [infrun] proceed: enter
+ [infrun] scoped_disable_commit_resumed: reason=proceeding
+ [infrun] reset: reason=proceeding
+ [infrun] proceed: exit
+ ... proceeding threads individually ...
+ [infrun] reset: reason=continue all threads in non-stop
+ [infrun] maybe_set_commit_resumed_all_targets: enabling commit-resumed for target remote
+ [infrun] maybe_call_commit_resumed_all_targets: calling commit_resumed for target remote
+ [remote] Sending packet: $vCont;c#a8
+
+ Change-Id: I331dd2473c5aa5114f89854196fed2a8fdd122bb
+
+2021-11-08 Simon Marchi <simon.marchi@polymtl.ca>
+
+ gdb: make dwarf2_find_containing_comp_unit take a dwarf2_per_bfd
+ While reading another patch, I saw that this function didn't need to
+ take a dwarf2_per_objfile, but could take a dwarf2_per_bfd instead.
+ It doesn't change the behavior, but doing this shows that this function
+ is objfile-independent (can work with only the shared per-bfd data).
+
+ Change-Id: I58f9c9cef6688902e95226480285da2d0005d77f
+
+2021-11-08 Simon Marchi <simon.marchi@polymtl.ca>
+
+ gdb: remove bpstat typedef, rename bpstats to bpstat
+ I don't find that the bpstat typedef, which hides a pointer, is
+ particularly useful. In fact, it confused me many times, and I just see
+ it as something to remember that adds cognitive load. Also, with C++,
+ we might want to be able to pass bpstats objects by const-reference, not
+ necessarily by pointer.
+
+ So, remove the bpstat typedef and rename struct bpstats to bpstat (since
+ it represents one bpstat, it makes sense that it is singular).
+
+ Change-Id: I52e763b6e54ee666a9e045785f686d37b4f5f849
+
+2021-11-08 Nick Alcock <nick.alcock@oracle.com>
+
+ libctf: add CTF format specification
+ It's been a long time since most of this was written: it's long past
+ time to put it in the binutils source tree. It's believed correct and
+ complete insofar as it goes: it documents format v3 (the current
+ version) but not the libctf API or any earlier versions. (The
+ earlier versions can be read by libctf but not generated by it, and you
+ are highly unlikely ever to see an example of any of them.)
+
+ libctf/ChangeLog
+ 2021-11-08 Nick Alcock <nick.alcock@oracle.com>
+
+ * doc/ctf-spec.texi: New file.
+ * configure.ac (MAKEINFO): Add.
+ (BUILD_INFO): Likewise.
+ (AC_CONFIG_FILES) [doc/Makefile]: Add.
+ * Makefile.am [BUILD_INFO] (SUBDIRS): Add doc/.
+ * doc/Makefile.am: New file.
+ * doc/Makefile.in: Likewise.
+ * configure: Regenerated.
+ * Makefile.in: Likewise.
+
+2021-11-08 GDB Administrator <gdbadmin@sourceware.org>
+
+ Automatic date update in version.in
+
+2021-11-07 Alan Modra <amodra@gmail.com>
+
+ Correct ld script wildcard matching description
+ Goes with commit 68bbb9f788d0
+
+ * ld.texi (Input Section Wildcards): Delete paragraph incorrectly
+ saying '*' does not match '/'.
+
+2021-11-07 Mike Frysinger <vapier@gentoo.org>
+
+ sim: sh: fix conversion of PC to an integer
+ On LLP64 targets where sizeof(long) != sizeof(void*), this code fails:
+ sim/sh/interp.c:704:24: error: cast from pointer to integer of different size -Werror=pointer-to-int-cast]
+ 704 | do { memstalls += ((((long) PC & 3) != 0) ? (n) : ((n) - 1)); } while (0)
+ | ^
+
+ Since this code simply needs to check alignment, cast it using uintptr_t
+ which is the right type for this.
+
+2021-11-07 Mike Frysinger <vapier@gentoo.org>
+
+ sim: sh: clean up time(NULL) call
+ Casting 0 to a pointer via (long *) doesn't work on LLP64 targets:
+ error: cast from pointer to integer of different size [-Werror=pointer-to-int-cast]
+
+ It's also unnecessary here. We can simply pass NULL like every other
+ bit of code does.
+
+2021-11-07 Mike Frysinger <vapier@gentoo.org>
+
+ sim: sh: break utime logic out of _WIN32 check
+ Some _WIN32 targets provide utime (like mingw), so move the header
+ include out from _WIN32 and under the specific HAVE_UTIME_H check.
+
+ sim: sh: drop errno extern
+ This isn't needed on any reasonable target nowadays, and no other
+ source does this, and breaks with some mingw targets, so punt the
+ extern entirely.
+
+ sim: sh: fix isnan redefinition with mingw targets
+ The code assumes that all _WIN32 targets are the same and can
+ define isnan to _isnan. For mingw targets, they provide an isnan
+ define already, so no need for the fallback here.
+
+ sim: arm/bfin/rx: undefine page size from system headers
+ Some targets (like cygwin) will export page size defines that clash
+ with our local usage here. Undefine the system one to fix building
+ for these targets.
+
+ sim: ppc: switch to libiberty environ.h
+ Drop our compat code and assume environ exists to simplify.
+ We did this for all other targets already, but ppc was missed.
+
+ sim: sh: enable -Werror everywhere
+ With most of the warnings fixed in interp.c, we can enable -Werror
+ here too now. There are some -Wmaybe-uninitialized warnings still
+ lurking that look legitimate, but we don't flag those are fatal,
+ and I don't have the expertise to dive into each opcode to figure
+ out the right way to clean them up.
+
+ sim: sh: fix uninitialized variable usage with pdmsb
+ This block of code relies on i to control which bits to test and how
+ many times to run through the loop, but it never actually initialized
+ it. There is another chunk of code that handles the pdmsb instruction
+ that sets i to 16, so use that here too assuming it's correct. The
+ programming manual suggests this is the right value too, but I am by
+ no means a SuperH DSP expert. The tests are still passing though ...
+
+ sim: sh: constify a few read-only lookup tables
+
+ sim: sh: fix various parentheses warnings
+ Add parentheses to a bunch of places where the compiler suggests we
+ do to avoid confusion to most readers.
+
+ sim: sh: fix unused-value warnings
+ These macro expansions are deliberate in not using the computed value
+ so that they trigger side-effects (possible invalid memory accesses)
+ but while otherwise being noops. Add a (void) cast so the compiler
+ knows these are intentional.
+
+ sim: sh: rework register layout with anonymous unions & structs
+ Now that we require C11, we can leverage anonymous unions & structs
+ to fix a long standing issue with the SH register layout. The use
+ of sregs.i for sh-dsp has generated a lot of compiler warnings about
+ the access being out of bounds -- it only has 7 elements declared,
+ but code goes beyond that to reach into the fregs that follow. But
+ now that we have anonymous unions, we can reduce the nested names
+ and have sregs cover all of these registers.
+
+2021-11-07 GDB Administrator <gdbadmin@sourceware.org>
+
+ Automatic date update in version.in
+
+2021-11-06 Tiezhu Yang <yangtiezhu@loongson.cn>
+
+ sim: mips: use sim_fpu_to{32,64}u to fix build warnings
+ Since the first argument type is unsigned32 or unsigned64, just use
+ sim_fpu_to{32,64}u instead of sim_fpu_to{32,64}i to fix the following
+ build warnings:
+
+ CC cp1.o
+ .../sim/mips/cp1.c: In function 'convert':
+ .../sim/mips/cp1.c:1425:32: warning: pointer targets in passing argument 1 of 'sim_fpu_to32i' differ in signedness [-Wpointer-sign]
+ status |= sim_fpu_to32i (&result32, &wop, round);
+ ^~~~~~~~~
+ In file included from .../sim/mips/sim-main.h:67,
+ from .../sim/mips/cp1.c:46:
+ .../sim/mips/../common/sim-fpu.h:270:22: note: expected 'signed32 *' {aka 'int *'} but argument is of type 'unsigned32 *' {aka 'unsigned int *'}
+ INLINE_SIM_FPU (int) sim_fpu_to32i (signed32 *i, const sim_fpu *f,
+ ^~~~~~~~~~~~~
+ .../sim/mips/cp1.c:1429:32: warning: pointer targets in passing argument 1 of 'sim_fpu_to64i' differ in signedness [-Wpointer-sign]
+ status |= sim_fpu_to64i (&result64, &wop, round);
+ ^~~~~~~~~
+ In file included from .../sim/mips/sim-main.h:67,
+ from .../sim/mips/cp1.c:46:
+ .../sim/mips/../common/sim-fpu.h:274:22: note: expected 'signed64 *' {aka 'long int *'} but argument is of type 'unsigned64 *' {aka 'long unsigned int *'}
+ INLINE_SIM_FPU (int) sim_fpu_to64i (signed64 *i, const sim_fpu *f,
+ ^~~~~~~~~~~~~
+ .../sim/mips/cp1.c: In function 'convert_ps':
+ .../sim/mips/cp1.c:1528:34: warning: pointer targets in passing argument 1 of 'sim_fpu_to32i' differ in signedness [-Wpointer-sign]
+ status_u |= sim_fpu_to32i (&res_u, &wop_u, round);
+ ^~~~~~
+ In file included from .../sim/mips/sim-main.h:67,
+ from .../sim/mips/cp1.c:46:
+ .../sim/mips/../common/sim-fpu.h:270:22: note: expected 'signed32 *' {aka 'int *'} but argument is of type 'unsigned32 *' {aka 'unsigned int *'}
+ INLINE_SIM_FPU (int) sim_fpu_to32i (signed32 *i, const sim_fpu *f,
+ ^~~~~~~~~~~~~
+ .../sim/mips/cp1.c:1529:34: warning: pointer targets in passing argument 1 of 'sim_fpu_to32i' differ in signedness [-Wpointer-sign]
+ status_l |= sim_fpu_to32i (&res_l, &wop_l, round);
+ ^~~~~~
+ In file included from .../sim/mips/sim-main.h:67,
+ from .../sim/mips/cp1.c:46:
+ .../sim/mips/../common/sim-fpu.h:270:22: note: expected 'signed32 *' {aka 'int *'} but argument is of type 'unsigned32 *' {aka 'unsigned int *'}
+ INLINE_SIM_FPU (int) sim_fpu_to32i (signed32 *i, const sim_fpu *f,
+ ^~~~~~~~~~~~~
+
+2021-11-06 Alan Modra <amodra@gmail.com>
+
+ Modernise yyerror
+ Newer versions of bison emit a prototype for yyerror
+ void yyerror (const char *);
+ This clashes with some of our old code that declares yyerror to return
+ an int. Fix that in most cases by modernizing yyerror. bfin-parse.y
+ uses the return value all over the place, so for there disable
+ generation of the prototype as specified by posix.
+
+ binutils/
+ * arparse.y (yyerror): Return void.
+ * dlltool.c (yyerror): Likewise.
+ * dlltool.h (yyerror): Likewise.
+ * sysinfo.y (yyerror): Likewise.
+ * windmc.h (yyerror): Likewise.
+ * mclex.c (mc_error): Extract from ..
+ (yyerror): ..here, both now returning void.
+ gas/
+ * config/bfin-parse.y (yyerror): Define.
+ (yyerror): Make static.
+ * itbl-parse.y (yyerror): Return void.
+ ld/
+ * deffilep.y (def_error): Return void.
+
+2021-11-06 Alan Modra <amodra@gmail.com>
+
+ ubsan: undefined shift in mach-o.c
+ This one was logically wrong too. If file_ptr was 64 bits, then -1U
+ is extended to 0x00000000ffffffff, probably not what was intended
+ here.
+
+ * mach-o.c (FILE_ALIGN): Correct expression.
+
+2021-11-06 Fangrui Song <maskray@google.com>
+
+ readelf: Support RELR in -S and -d and output
+ readelf -r dumping support is not added in this patch.
+
+ include/
+ * elf/common.h: Add SHT_RELR, DT_RELR{,SZ,ENT}
+ bfd/
+ * elf.c (_bfd_elf_print_private_bfd_data): Add DT_RELR{,SZ,ENT}.
+ binutils/
+ * readelf.c (get_dynamic_type): Add DT_RELR{,SZ,ENT}.
+ (get_section_type_name): Add SHT_RELR.
+
+2021-11-06 Fangrui Song <maskray@google.com>
+
+ readelf: Make DT_PREINIT_ARRAYSZ's output style match DT_INIT_ARRAYSZ
+ The output now looks like:
+
+ - 0x0000000000000021 (PREINIT_ARRAYSZ) 0x10
+ + 0x0000000000000021 (PREINIT_ARRAYSZ) 16 (bytes)
+ 0x0000000000000019 (INIT_ARRAY) 0xbefc90
+ 0x000000000000001b (INIT_ARRAYSZ) 536 (bytes)
+
+ * readelf.c (process_dynamic_section): Handle DT_PREINIT_ARRAYSZ.
+
+2021-11-06 Mike Frysinger <vapier@gentoo.org>
+
+ sim: clarify license text via COPYING file
+ The project has been using GPL v3 for a while now in the source files,
+ and the arm & ppc ports have carried a copy of the COPYING file. Lets
+ move those up to the top sim dir like other projects to make it clear.
+
+ Also drop the ppc/COPYING.LIB as it's not really referenced by any
+ source as everything is GPL v3.
+
+2021-11-06 GDB Administrator <gdbadmin@sourceware.org>
+
+ Automatic date update in version.in
+
+2021-11-05 Tom Tromey <tom@tromey.com>
+
+ Introduce make_unique_xstrndup
+ This adds a new make_unique_xstrndup function, which is the "n"
+ analogue of make_unique_xstrdup. It also updates a couple existing
+ places to use this function.
+
+2021-11-05 Pedro Alves <pedro@palves.net>
+
+ Avoid /proc/pid/mem races (PR 28065)
+ PR 28065 (gdb.threads/access-mem-running-thread-exit.exp intermittent
+ failure) shows that GDB can hit an unexpected scenario -- it can
+ happen that the kernel manages to open a /proc/PID/task/LWP/mem file,
+ but then reading from the file returns 0/EOF, even though the process
+ hasn't exited or execed.
+
+ "0" out of read/write is normally what you get when the address space
+ of the process the file was open for is gone, because the process
+ execed or exited. So when GDB gets the 0, it returns memory access
+ failure. In the bad case in question, the process hasn't execed or
+ exited, so GDB fails a memory access when the access should have
+ worked.
+
+ GDB has code in place to gracefully handle the case of opening the
+ /proc/PID/task/LWP/mem just while the LWP is exiting -- most often the
+ open fails with EACCES or ENOENT. When it happens, GDB just tries
+ opening the file for a different thread of the process. The testcase
+ is written such that it stresses GDB's logic of closing/reopening the
+ /proc/PID/task/LWP/mem file, by constantly spawning short lived
+ threads.
+
+ However, there's a window where the kernel manages to find the thread,
+ but the thread exits just after and clears its address space pointer.
+ In this case, the kernel creates a file successfully, but the file
+ ends up with no address space associated, so a subsequent read/write
+ returns 0/EOF too, just like if the whole process had execed or
+ exited. This is the case in question that GDB does not handle.
+
+ Oleg Nesterov gave this suggestion as workaround for that race:
+
+ gdb can open(/proc/pid/mem) and then read (say) /proc/pid/statm.
+ If statm reports something non-zero, then open() was "successfull".
+
+ I think that might work. However, I didn't try it, because I realized
+ we have another nasty race that that wouldn't fix.
+
+ The other race I realized is that because we close/reopen the
+ /proc/PID/task/LWP/mem file when GDB switches to a different inferior,
+ then it can happen that GDB reopens /proc/PID/task/LWP/mem just after
+ a thread execs, and before GDB has seen the corresponding exec event.
+ I.e., we can open a /proc/PID/task/LWP/mem file accessing the
+ post-exec address space thinking we're accessing the pre-exec address
+ space.
+
+ A few months back, Simon, Oleg and I discussed a similar race:
+
+ [Bug gdb/26754] Race condition when resuming threads and one does an exec
+ https://sourceware.org/bugzilla/show_bug.cgi?id=26754
+
+ The solution back then was to make the kernel fail any ptrace
+ operation until the exec event is consumed, with this kernel commit:
+
+ commit dbb5afad100a828c97e012c6106566d99f041db6
+ Author: Oleg Nesterov <oleg@redhat.com>
+ AuthorDate: Wed May 12 15:33:08 2021 +0200
+ Commit: Linus Torvalds <torvalds@linux-foundation.org>
+ CommitDate: Wed May 12 10:45:22 2021 -0700
+
+ ptrace: make ptrace() fail if the tracee changed its pid unexpectedly
+
+ This however, only applies to ptrace, not to the /proc/pid/mem file
+ opening case. Also, even if it did apply to the file open case, we
+ would want to support current kernels until such a fix is more wide
+ spread anyhow.
+
+ So all in all, this commit gives up on the idea of only ever keeping
+ one /proc/pid/mem file descriptor open. Instead, make GDB open a
+ /proc/pid/mem per inferior, and keep it open until the inferior exits,
+ is detached or execs. Make GDB open the file right after the inferior
+ is created or is attached to or forks, at which point we know the
+ inferior is stable and stopped and isn't thus going to exec, or have a
+ thread exit, and so the file open won't fail (unless the whole process
+ is SIGKILLed from outside GDB, at which point it doesn't matter
+ whether we open the file).
+
+ This way, we avoid both races described above, at the expense of using
+ more file descriptors (one per inferior).
+
+ Bug: https://sourceware.org/bugzilla/show_bug.cgi?id=28065
+ Change-Id: Iff943b95126d0f98a7973a07e989e4f020c29419
+
+2021-11-05 Andrew Burgess <aburgess@redhat.com>
+
+ gdb/testsuite: use gdb_get_line_number
+ Replaces a hard coded line number with a use of gdb_get_line_number.
+
+ I suspect that the line number has, over time, come adrift from where
+ it was supposed to be stopping. When the test was first added, line
+ 770 pointed at the final 'return 0' in function main. Over time, as
+ things have been added, line 770 now points at some random location in
+ the middle of main.
+
+ So, I've marked the 'return 0' with a comment, and now the test will
+ always stop there.
+
+ I also removed an old comment from 1997 talking about how these tests
+ will only pass with the HP compiler, followed by an additional comment
+ from 2000 saying that the tests now pass with GCC.
+
+ I get the same results before and after this change.
+
+2021-11-05 Alan Modra <amodra@gmail.com>
+
+ PR28541, unstable cie offset in the output of readelf
+ Calculating "0 - pointer" can indeed result in seeming randomness as
+ the pointer address varies.
+
+ PR 28541
+ * dwarf.c (display_debug_frames): Don't print cie offset when
+ invalid, print "invalid" instead. Remove now redundant warning.
+
+2021-11-05 Alan Modra <amodra@gmail.com>
+
+ Missing va_end in aarch64-dis.c
+ * aarch64-dis.c (extract_fields): Invoke va_end.
+
+2021-11-05 Alan Modra <amodra@gmail.com>
+
+ PR28530, Hang in objdump on machine with 196GB RAM
+ Investigating the PR28530 testcase, which has a fuzzed compression
+ header with an enormous size, I noticed that decompress_contents is
+ broken when the size doesn't fit in strm.avail_out. It wouldn't be
+ too hard to support larger sizes (patches welcome!) but for now just
+ stop decompress_contents from returning rubbish.
+
+ PR 28530
+ * compress.c (decompress_contents): Fail when uncompressed_size
+ is too big.
+ (bfd_init_section_decompress_status): Likewise.
+
+2021-11-05 Alan Modra <amodra@gmail.com>
+
+ asan: alpha-vms: objdump buffer overflows
+ * vms-alpha.c (evax_bfd_print_desc): Sanity check buffer access.
+ (evax_bfd_print_valspec, evax_bfd_print_typspec): Likewise.
+ (evax_bfd_print_dst): Likewise.
+
+2021-11-05 GDB Administrator <gdbadmin@sourceware.org>
+
+ Automatic date update in version.in
+
+2021-11-04 Simon Marchi <simon.marchi@polymtl.ca>
+
+ gdb: introduce "set index-cache enabled", deprecate "set index-cache on/off"
+ The "set index-cache" command is used at the same time as a prefix
+ command (prefix for "set index-cache directory", for example), and a
+ boolean setting for turning the index-cache on and off. Even though I
+ did introduce that, I now don't think it's a good idea to do something
+ non-standard like this.
+
+ First, there's no dedicated CLI command to show whether the index-cache
+ is enabled, so it has to be custom output in the "show index-cache
+ handler". Also, it means there's no good way a MI frontend can find out
+ if the index-cache is enabled. "-gdb-show index-cache" doesn't show it
+ in the MI output record:
+
+ (gdb) interpreter-exec mi "-gdb-show index-cache"
+ ~"\n"
+ ~"The index cache is currently disabled.\n"
+ ^done,showlist={option={name="directory",value="/home/simark/.cache/gdb"}}
+
+ Fix this by introducing "set/show index-cache enabled on/off", regular
+ boolean setting commands. Keep commands "set index-cache on" and "set
+ index-cache off" as deprecated aliases of "set index-cache enabled",
+ with respectively the default arguments "on" and "off".
+
+ Update tests using "set index-cache on/off" to use the new command.
+ Update the regexps in gdb.base/maint.exp to figure out whether the
+ index-cache is enabled or not. Update the doc to mention the new
+ commands.
+
+ Change-Id: I7d5aaaf7fd22bf47bd03e0023ef4fbb4023b37b3
+
+2021-11-04 Simon Marchi <simon.marchi@polymtl.ca>
+
+ gdb: pass/return setting setter/getter scalar values by value
+ The getter and setter in struct setting always receive and return values
+ by const reference. This is not necessary for scalar values (like bool
+ and int), but more importantly it makes it a bit annoying to write a
+ getter, you have to use a scratch static variable or something similar
+ that you can refer to:
+
+ const bool &
+ my_getter ()
+ {
+ static bool value;
+ value = function_returning_bool ();
+ return value;
+ }
+
+ Change the getter and setter function signatures to receive and return
+ value by value instead of by reference, when the underlying data type is
+ scalar. This means that string-based settings will still use
+ references, but all others will be by value. The getter above would
+ then be re-written as:
+
+ bool
+ my_getter ()
+ {
+ return function_returning_bool ();
+ }
+
+ This is useful for a patch later in this series that defines a boolean
+ setting with a getter and a setter.
+
+ Change-Id: Ieca3a2419fcdb75a6f75948b2c920b548a0af0fd
+
+2021-11-04 Simon Marchi <simon.marchi@polymtl.ca>
+
+ gdb: remove command_class enum class_deprecated
+ The class_deprecated enumerator isn't assigned anywhere, so remove it.
+ Commands that are deprecated have cmd_list_element::cmd_deprecated set
+ instead.
+
+ Change-Id: Ib35e540915c52aa65f13bfe9b8e4e22e6007903c
+
+2021-11-04 Simon Marchi <simon.marchi@polymtl.ca>
+
+ gdb: remove unnecessary cmd_list_element::aliases nullptr checks
+ Remove two unnecessary nullptr checks. If aliases is nullptr, then the
+ for loops will simply be skipped.
+
+ Change-Id: I9132063bb17798391f8d019af305383fa8e0229f
+
+2021-11-04 Simon Marchi <simon.marchi@polymtl.ca>
+
+ gdbserver: re-generate configure
+ I get some diffs when running autoconf in gdbserver, probably leftovers
+ from commit 5dfe4bfcb969 ("Fix format_pieces selftest on Windows").
+ Re-generate configure in that directory.
+
+ Change-Id: Icdc9906af95fbaf1047a579914b2983f8ec5db08
+
+2021-11-04 H.J. Lu <hjl.tools@gmail.com>
+
+ Revert "bfd: Always check sections with the corrupt size"
+ This reverts commit e0f7ea91436dd308a094c4c101fd4169e8245a91.
+
+2021-11-04 H.J. Lu <hjl.tools@gmail.com>
+
+ bfd: Always check sections with the corrupt size
+ Always check sections with the corrupt size for non-MMO files. Skip MMO
+ files for compress_status == COMPRESS_SECTION_NONE since MMO has special
+ handling for COMPRESS_SECTION_NONE.
+
+ PR binutils/28530
+ * compress.c (bfd_get_full_section_contents): Always check
+ sections with the corrupt size.
+
+2021-11-04 Nelson Chu <nelson.chu@sifive.com>
+
+ RISC-V: Clarify the behavior of .option rvc or norvc.
+ Add/Remove the rvc extension to/from the riscv_subsets once the
+ .option rvc/norvc is set. So that we don't need to always check
+ the riscv_opts.rvc in the riscv_subset_supports, just call the
+ riscv_lookup_subset to search the subset list is enough.
+
+ Besides, we will need to dump the instructions according to the
+ elf architecture attributes. That means the dis-assembler needs
+ to parse the architecture string from the elf attribute before
+ dumping any instructions, and also needs to recognized the
+ INSN_CLASS* classes from riscv_opcodes. Therefore, I suppose
+ some functions will need to be moved from gas/config/tc-riscv.c
+ to bfd/elfxx-riscv.c, including riscv_multi_subset_supports and
+ riscv_subset_supports. This is one of the reasons why we need
+ this patch.
+
+ This patch passes the gcc/binutils regressions of rv32emc-elf,
+ rv32i-elf, rv64gc-elf and rv64gc-linux toolchains.
+
+ bfd/
+ * elfxx-riscv.c (riscv_remove_subset): Remove the extension
+ from the subset list.
+ (riscv_update_subset): Add/Remove an extension to/from the
+ subset list. This is used for the .option rvc or norvc.
+ * elfxx-riscv.h: Added the extern bool riscv_update_subset.
+ gas/
+ * config/tc-riscv.c (riscv_set_options): Removed the unused
+ rve flag.
+ (riscv_opts): Likewise.
+ (riscv_set_rve): Removed.
+ (riscv_subset_supports): Removed the riscv_opts.rvc check.
+ (riscv_set_arch): Don't need to call riscv_set_rve.
+ (reg_lookup_internal): Call riscv_subset_supports to check
+ whether the rve is supported.
+ (s_riscv_option): Add/Remove the rvc extension to/from the
+ subset list once the .option rvc/norvc is set.
+
+2021-11-04 Mike Frysinger <vapier@gentoo.org>
+
+ sim: mips: fix missing prototype in multi-run generation
+ The multi-run logic for mips involves a bit of codegen and rewriting
+ of files to include per-architecture prefixes. That can result in
+ files with missing prototypes which cause compiler errors. In the
+ case of mips-sde-elf targets, we have:
+ $srcdir/m16run.c -> $builddir/m16mips64r2_run.c
+ sim_engine_run -> m16mips64r2_engine_run
+ $srcdir/micromipsrun.c -> micromipsmicromips_run.c
+ sim_engine_run -> micromips64micromips_engine_run
+
+ micromipsmicromips_run.c:80:1: error: no previous prototype for 'micromips64micromips_engine_run' [-Werror=missing-prototypes]
+ 80 | micromips64micromips_engine_run (SIM_DESC sd, int next_cpu_nr, int nr_cpus,
+
+ We generate headers for those prototypes in the configure script,
+ but only include them in the generated multi-run.c file. Update the
+ rewrite logic to turn the sim-engine.h include into the relevant
+ generated engine include so these files also have their prototypes.
+ $srcdir/m16run.c -> $builddir/m16mips64r2_run.c
+ sim-engine.h -> m16mips64r2_engine.h
+ $srcdir/micromipsrun.c -> micromipsmicromips_run.c
+ sim-engine.h -> micromips64micromips_engine.h
+
+2021-11-04 Alan Modra <amodra@gmail.com>
+
+ PR28540, segmentation fault on NULL byte_get
+ PR 28540
+ * objdump.c (dump_bfd): Don't attempt load_separate_debug_files
+ when byte_get is NULL.
+
+2021-11-04 GDB Administrator <gdbadmin@sourceware.org>
+
+ Automatic date update in version.in
+
+2021-11-03 Mike Frysinger <vapier@gentoo.org>
+
+ sim: ppc: inline common sim-fpu.c logic
+ We will never bother building w/out a ../common/ sim directory,
+ so drop ancient logic supporting that method.
+
+2021-11-03 Mike Frysinger <vapier@gentoo.org>
+
+ sim: ppc: switch to common builds for callback objects
+ We don't need to build this anymore ourselves since the common build
+ includes it and produces the same object code. We also need to pull
+ in the split constant modules after the refactoring and pulling them
+ out of nltvals.def & targ-map.o. This doesn't matter for the sim
+ directly, but does for gdb and other users of libsim.
+
+ We also delete some conditional source tree logic since we already
+ require this be the "new" combined tree with a ../common/ dir. This
+ has been the case for decades at this point.
+
+2021-11-03 Simon Marchi <simon.marchi@polymtl.ca>
+
+ gdb: fix gnu-nat build
+ When building gnu-nat.c, we get:
+
+ CXX gnu-nat.o
+ gnu-nat.c: In member function 'virtual void gnu_nat_target::create_inferior(const char*, const string&, char**, int)':
+ gnu-nat.c:2117:13: error: 'struct inf' has no member named 'target_is_pushed'
+ 2117 | if (!inf->target_is_pushed (this))
+ | ^~~~~~~~~~~~~~~~
+ gnu-nat.c:2118:10: error: 'struct inf' has no member named 'push_target'
+ 2118 | inf->push_target (this);
+ | ^~~~~~~~~~~
+
+ This is because of a confusion between the generic `struct inferior`
+ variable and the gnu-nat-specific `struct inf` variable. Fix by
+ referring to `inferior`, not `inf`.
+
+ Adjust the comment on top of `struct inf` to clarify the purpose of that
+ type.
+
+ Co-Authored-By: Andrea Monaco <andrea.monaco@autistici.org>
+ Change-Id: I2fe2f7f6ef61a38d79860fd262b08835c963fc77
+
+2021-11-03 Simon Marchi <simon.marchi@polymtl.ca>
+
+ gdb/testsuite: set ASAN_OPTIONS=detect_leaks=0 while running tests
+ We see some additional failures when running the testsuite against a GDB
+ compiled with ASan, compared to a GDB compiled without ASan. Some of
+ them are caused by the memory leak report shown by the GDB process when
+ it exits, and the fact that it makes it exit with a non-zero exit code.
+
+ I generally try to remember to set ASAN_OPTIONS=detect_leaks=0 in my
+ environment when running the tests, but I don't always do it. I think
+ it would be nice if the testsuite did it. I don't see any use to have
+ leak detection when running the tests. That is, unless we ever have a
+ test that ensures GDB doesn't leak memory, which isn't going to happen
+ any time soon.
+
+ Here are some tests I found that were affected by this:
+
+ gdb.base/batch-exit-status.exp
+ gdb.base/many-headers.exp
+ gdb.base/quit.exp
+ gdb.base/with-mf.exp
+ gdb.dwarf2/gdb-add-index.exp
+ gdb.dwarf2/gdb-add-index-symlink.exp
+ gdb.dwarf2/imported-unit-runto-main.exp
+
+ Change-Id: I784c7df8a13979eb96587f735c1d33ba2cc6e0ca
+
+2021-11-03 Tom Tromey <tromey@adacore.com>
+
+ Use section name in warnings in display_debug_loc
+ While looking at an apparently malformed executable with
+ "readelf --debug-dump=loc", I got this warning:
+
+ readelf: ./main: Warning: There is a hole [0x89 - 0x95] in .debug_loc section.
+
+ However, the executable only has a .debug_loclists section.
+
+ This patch fixes the warning messages in display_debug_loc to use the
+ name of the section that is being processed.
+
+ binutils/ChangeLog
+ 2021-11-03 Tom Tromey <tromey@adacore.com>
+
+ * dwarf.c (display_debug_loc): Use section name in warnings.
+
+2021-11-03 Luis Machado <luis.machado@linaro.org>
+
+ [AArch64] Make gdbserver register set selection dynamic
+ The current register set selection mechanism for AArch64 is static, based
+ on a pre-populated array of register sets.
+
+ This means that we might potentially probe register sets that are not
+ available. This is OK if the kernel errors out during ptrace, but probing the
+ tag_ctl register, for example, does not result in a ptrace error if the kernel
+ supports the tagged address ABI but not MTE (PR 28355).
+
+ Making the register set selection dynamic, based on feature checks, solves
+ this and simplifies the code a bit. It allows us to list all of the register
+ sets only once, and pick and choose based on HWCAP/HWCAP2 or other properties.
+
+ I plan to backport this fix to GDB 11 as well.
+
+ Bug: https://sourceware.org/bugzilla/show_bug.cgi?id=28355
+
+2021-11-03 Jan Kratochvil <jan.kratochvil@redhat.com>
+
+ Fix LD_PRELOAD=/usr/lib64/libasan.so.6 gdb
+ Currently for a binary compiled normally (without -fsanitize=address) but with
+ LD_PRELOAD of ASAN one gets:
+
+ $ ASAN_OPTIONS=detect_leaks=0:alloc_dealloc_mismatch=1:abort_on_error=1:fast_unwind_on_malloc=0 LD_PRELOAD=/usr/lib64/libasan.so.6 gdb
+ =================================================================
+ ==1909567==ERROR: AddressSanitizer: alloc-dealloc-mismatch (malloc vs operator delete []) on 0x602000001570
+ #0 0x7f1c98e5efa7 in operator delete[](void*) (/usr/lib64/libasan.so.6+0xb0fa7)
+ ...
+ 0x602000001570 is located 0 bytes inside of 2-byte region [0x602000001570,0x602000001572)
+ allocated by thread T0 here:
+ #0 0x7f1c98e5cd1f in __interceptor_malloc (/usr/lib64/libasan.so.6+0xaed1f)
+ #1 0x557ee4a42e81 in operator new(unsigned long) (/usr/libexec/gdb+0x74ce81)
+ SUMMARY: AddressSanitizer: alloc-dealloc-mismatch (/usr/lib64/libasan.so.6+0xb0fa7) in operator delete[](void*)
+ ==1909567==HINT: if you don't care about these errors you may set ASAN_OPTIONS=alloc_dealloc_mismatch=0
+ ==1909567==ABORTING
+
+ Despite the code called properly operator new[] and operator delete[].
+ But GDB's new-op.cc provides its own operator new[] which gets translated into
+ malloc() (which gets recogized as operatore new(size_t)) but as it does not
+ translate also operators delete[] Address Sanitizer gets confused.
+
+ The question is how many variants of the delete operator need to be provided.
+ There could be 14 operators new but there are only 4, GDB uses 3 of them.
+ There could be 16 operators delete but there are only 6, GDB uses 2 of them.
+ It depends on libraries and compiler which of the operators will get used.
+ Currently being used:
+ U operator new[](unsigned long)
+ U operator new(unsigned long)
+ U operator new(unsigned long, std::nothrow_t const&)
+ U operator delete[](void*)
+ U operator delete(void*, unsigned long)
+
+ Tested on x86_64-linux.
+
+2021-11-03 Alan Modra <amodra@gmail.com>
+
+ asan: dlltool buffer overflow: embedded NUL in string
+ yyleng gives the pattern length, xstrdup just copies up to the NUL.
+ So it is quite possible writing at an index of yyleng-2 overflows
+ the xstrdup allocated string buffer. xmemdup quite handily avoids
+ this problem, even writing the terminating NUL over the trailing
+ quote. Use it in ldlex.l too where we'd already had a report of this
+ problem and fixed it by hand, and to implement xmemdup0 in gas.
+
+ binutils/
+ * deflex.l (single and double quote strings): Use xmemdup.
+ gas/
+ * as.h (xmemdup0): Use xmemdup.
+ ld/
+ PR 20906
+ * ldlex.l (double quote string): Use xmemdup.
+
+2021-11-03 Mike Frysinger <vapier@gentoo.org>
+
+ sim: mloop: mark a few conditionally used funcs as unused
+ These are marked inline, so building w/gcc at higher optimization
+ levels will automatically discard them. But building with -O0 will
+ trigger unused function warnings, so fix that.
+
+ The common before/after cover functions in the common mloop generator
+ are not used by all architecture ports. Doesn't seem to be a hard
+ requirement, so marking them optional (i.e. unused) is fine.
+
+ The cris execute function is conditionally used depending on the
+ fast-build mode settings, so mark it unused too.
+
+2021-11-03 Alan Modra <amodra@gmail.com>
+
+ asan: assert (addr_ranges) <= (start)
+ That assert would be more obvious if it were reported as
+ "addr_ranges <= end_ranges". Fix that by using the obvious variable
+ in the final loop. Stop the assertion by using a signed comparison:
+ It's possible for the rounding up of the arange pointer to exceed the
+ end of the block when the block size is fuzzed.
+
+ * dwarf.c (display_debug_aranges): Use "end_ranges" in loop
+ displaying ranges rather that "start". Simplify rounding up
+ to 2*address_size boundary. Use signed comparison in loop.
+
+2021-11-03 Mike Frysinger <vapier@gentoo.org>
+
+ sim: hoist cgen mloop rules up to common builds
+ These rules don't depend on the target compiler settings, so hoist
+ the build logic up to the common builds for better parallelization.
+
+ We have to extend the genmloop.sh logic a bit to allow outputting
+ to a subdir since it always assumed cwd was the right place.
+
+ We leave the cgen maintainer rules in the subdirs for now as they
+ aren't normally run, and they rely on cgen logic that has not yet
+ been generalized.
+
+2021-11-03 Mike Frysinger <vapier@gentoo.org>
+
+ sim: hoist mn10300 & v850 igen rules up to common builds
+ These rules don't depend on the target compiler settings, so hoist
+ the build logic up to the common builds for better parallelization.
+
+ We leave the mips rules in place as they depend on complicated
+ arch-specific configure logic that needs to be untangled first.
+
+2021-11-03 Mike Frysinger <vapier@gentoo.org>
+
+ sim: hoist gencode & opc2c build rules up to common builds
+ These rules don't depend on the target compiler settings, so hoist
+ the build logic up to the common builds for better parallelization.
+
+2021-11-03 Mike Frysinger <vapier@gentoo.org>
+
+ opcodes: d10v: simplify header includes
+ This file doesn't use anything from bfd (sysdep.h), so drop that
+ include. This avoids an implicit dependency on the generated
+ config.h which can be problematic for build-time tools.
+
+ Also swap stdio.h for stddef.h. This file isn't doing or using
+ any I/O structures, but it does need NULL.
+
+2021-11-03 Alan Modra <amodra@gmail.com>
+
+ PR28523, ld.bfd created undefined symbols on ppc64
+ This patch removes any fake (linker created) function descriptor
+ symbol if its code entry symbol isn't dynamic, to ensure bogus dynamic
+ symbols are not created. The change to func_desc_adjust requires that
+ it be run only once, which means ppc64_elf_tls_setup can't call it for
+ just a few selected symbols.
+
+ PR 28523
+ * elf64-ppc.c (func_desc_adjust): If a function entry sym is
+ not dynamic and has no plt entry, hide any associated fake
+ function descriptor symbol.
+ (ppc64_elf_edit): Move func_desc_adjust iteration over syms to..
+ (ppc64_elf_tls_setup): ..here.
+
+2021-11-03 GDB Administrator <gdbadmin@sourceware.org>
+
+ Automatic date update in version.in
+
+2021-11-02 Tom de Vries <tdevries@suse.de>
+
+ [gdb/tdep, rs6000] Don't skip system call in skip_prologue
+ I ran into a case where a breakpoint on _exit never triggered, because it was
+ set past the end of the _exit prologue, past the end of the exit_group system
+ call (which does not return).
+
+ More concretely, the breakpoint was set at the last insn show here:
+ ...
+ Dump of assembler code for function _exit:
+ 0x00007ffff7e42ea0 <+0>: 12 00 4c 3c addis r2,r12,18
+ 0x00007ffff7e42ea4 <+4>: 60 43 42 38 addi r2,r2,17248
+ 0x00007ffff7e42ea8 <+8>: 00 00 00 60 nop
+ 0x00007ffff7e42eac <+12>: f8 ff e1 fb std r31,-8(r1)
+ 0x00007ffff7e42eb0 <+16>: 78 1b 7f 7c mr r31,r3
+ 0x00007ffff7e42eb4 <+20>: f0 ff c1 fb std r30,-16(r1)
+ 0x00007ffff7e42eb8 <+24>: ea 00 00 38 li r0,234
+ 0x00007ffff7e42ebc <+28>: a0 8b 22 e9 ld r9,-29792(r2)
+ 0x00007ffff7e42ec0 <+32>: 78 fb e3 7f mr r3,r31
+ 0x00007ffff7e42ec4 <+36>: 14 6a c9 7f add r30,r9,r13
+ 0x00007ffff7e42ec8 <+40>: 02 00 00 44 sc
+ 0x00007ffff7e42ecc <+44>: 26 00 00 7c mfcr r0
+ 0x00007ffff7e42ed0 <+48>: 00 10 09 74 andis. r9,r0,4096
+ ...
+
+ Fix this by treating system calls the same as branches in skip_prologue:
+ by default, don't skip, such that the breakpoint is set at 0x00007ffff7e42eb8
+ instead.
+
+ Tested on ppc64le-linux, on a power 8 machine.
+
+ Bug: https://sourceware.org/bugzilla/show_bug.cgi?id=28527
+
+2021-11-02 Tom de Vries <tdevries@zinfandel-3.arch.suse.de>
+
+ [gdb/testsuite] Handle SIGILL in two gdb.arch powerpc test-cases
+ On powerpc64le-linux, with test-case gdb.arch/powerpc-addpcis.exp I run into
+ SIGILL:
+ ...
+ (gdb) PASS: gdb.arch/powerpc-addpcis.exp: get hexadecimal valueof "$r3"
+ stepi^M
+ ^M
+ Program terminated with signal SIGILL, Illegal instruction.^M
+ The program no longer exists.^M
+ (gdb) PASS: gdb.arch/powerpc-addpcis.exp: set r4
+ ...
+ because it's a power9 insn, and I'm running on a power8 machine.
+
+ Fix this by handling the SIGILL. Likewise in gdb.arch/powerpc-lnia.exp.
+
+ Tested on powerpc64le-linux.
+
+2021-11-02 Andrew Burgess <andrew.burgess@embecosm.com>
+
+ gdb/sim: update my email address
+ gdb:
+
+ * MAINTAINERS (Global Maintainers): Update my address.
+ (Responsible Maintainers): Likewise.
+ (Write After Approval): Likewise.
+
+ sim:
+
+ * MAINTAINERS (Global Maintainers): Update my address.
+
+2021-11-02 Tom de Vries <tdevries@suse.de>
+
+ [gdb/testsuite] Fix stepi test-cases with unix/-m32/-fPIE/-pie
+ When running test-case gdb.base/step-indirect-call-thunk.exp with target board
+ unix/-m32/-fPIE/-pie, I run into:
+ ...
+ (gdb) stepi^M
+ 0x5655552e 22 { /* inc.1 */^M
+ (gdb) stepi^M
+ 0x56555530 22 { /* inc.1 */^M
+ (gdb) stepi^M
+ 0x565555f7 in __x86.get_pc_thunk.ax ()^M
+ (gdb) FAIL: gdb.base/step-indirect-call-thunk.exp: stepi into return thunk
+ ...
+
+ In contrast, with unix/-m32 we have instead:
+ ...
+ (gdb) stepi^M
+ 0x08048407 22 { /* inc.1 */^M
+ (gdb) stepi^M
+ 23 return x + 1; /* inc.2 */^M
+ (gdb) stepi^M
+ 0x0804840c 23 return x + 1; /* inc.2 */^M
+ (gdb) stepi^M
+ 24 } /* inc.3 */^M
+ (gdb) stepi^M
+ 0x08048410 24 } /* inc.3 */^M
+ (gdb) stepi^M
+ 0x0804848f in __x86_return_thunk ()^M
+ (gdb) PASS: gdb.base/step-indirect-call-thunk.exp: stepi into return thunk
+ ...
+
+ The test-case doesn't expect to run into __x86.get_pc_thunk.ax, which is a
+ PIC helper function for x86_64-linux.
+
+ Fix this by insn-stepping through it.
+
+ Likewise in a few other test-cases.
+
+ Tested on x86_64-linux.
+
+2021-11-02 GDB Administrator <gdbadmin@sourceware.org>
+
+ Automatic date update in version.in
+
+2021-11-01 Alan Modra <amodra@gmail.com>
+
+ ARM: match armeb output for unwind-pacbti-m test
+ * testsuite/gas/arm/unwind-pacbti-m.d: Match armeb output.
+
+2021-11-01 Bruno Larsen <blarsen@redhat.com>
+
+ [gdb/doc]: Updated manpages to be consistent with help
+ Updated manpages to be consistent with help information provided by the
+ binary. The main changes are:
+
+ * Making all long-form options have '--', instead of a single '-';
+ * added most of the missing options to the manpage;
+ * removed the information about using '+' instead of '-', since it
+ doesn't seem to be supported anymore.
+
+ This also fixes 2 upstream bugs:
+ * https://sourceware.org/bugzilla/show_bug.cgi?id=23965; by adding
+ --args to the manpage
+ * https://sourceware.org/bugzilla/show_bug.cgi?id=10619; by adding the
+ double dashes
+
+2021-11-01 Alan Modra <amodra@gmail.com>
+
+ macho-o archive sanity checks
+ Anti-fuzzing checks.
+
+ * mach-o.c (bfd_mach_o_fat_archive_p): Sanity check entry offset
+ and size against file size.
+
+2021-11-01 Alan Modra <amodra@gmail.com>
+
+ objcopy buffer overflow
+ "tocopy" in this code was an int, which when the size to be copied was
+ larger than MAXINT could result in tocopy being negative. A negative
+ value of course is less than BUFSIZE, but when converted to
+ bfd_size_type is extremely large.
+
+ PR 995
+ * objcopy.c (copy_unknown_object): Correct calculation of "tocopy".
+ Use better variable types.
+
+2021-11-01 Przemyslaw Wirkus <przemyslaw.wirkus@arm.com>
+
+ arm: add armv9-a architecture to -march
+ Update also include:
+ + New value of Tag_CPU_arch EABI attribute (22) is added.
+ + Updated missing Tag_CPU_arch EABI attributes.
+ + Updated how we combine archs 'v4t_plus_v6_m' as this mechanism
+ have to handle new Armv9 as well.
+
+ Regression tested on `arm-none-eabi` cross Binutils and no issues.
+
+ bfd/
+
+ * archures.c: Define bfd_mach_arm_9.
+ * bfd-in2.h (bfd_mach_arm_9): Define bfd_mach_arm_9.
+ * cpu-arm.c: Add 'armv9-a' option to -march.
+ * elf32-arm.c (using_thumb2_bl): Update assert check.
+ (arch_has_arm_nop): Add TAG_CPU_ARCH_V9.
+ (bfd_arm_get_mach_from_attributes): Add case for TAG_CPU_ARCH_V9.
+ Update assert.
+ (tag_cpu_arch_combine): Updated table.
+ (v9): New table..
+
+ binutils/
+
+ * readelf.c (arm_attr_tag_CPU_arch): Update with
+
+ elfcpp/
+
+ * arm.h: Update TAG_CPU_ARCH_ enums with correct values.
+
+ gas/
+
+ * NEWS: Update docs.
+ * config/tc-arm.c (get_aeabi_cpu_arch_from_fset): Return Armv9-a
+ for -amarch=all.
+ (aeabi_set_public_attributes): Update assert.
+ * doc/c-arm.texi: Update docs.
+ * testsuite/gas/arm/armv9-a_arch.d: New test.
+ * testsuite/gas/arm/attr-march-all.d: Update test with v9.
+
+ include/
+
+ * elf/arm.h Update TAG_CPU_ARCH_ defines with correct values.
+ * opcode/arm.h (ARM_EXT3_V9A): New macro.
+ (ARM_ARCH_NONE): Updated with arm_feature_set.core size.
+ (FPU_NONE): Updated.
+ (ARM_ANY): Updated.
+ (ARM_ARCH_UNKNOWN): New macro.
+ (ARM_FEATURE_LOW): Updated.
+ (ARM_FEATURE_CORE): Updated.
+ (ARM_FEATURE_CORE_LOW): Updated.
+ (ARM_FEATURE_CORE_HIGH): Updated.
+ (ARM_FEATURE_COPROC): Updated.
+ (ARM_FEATURE): Updated.
+ (ARM_FEATURE_ALL): New macro.
+
+ opcodes/
+
+ * arm-dis.c (select_arm_features): Support bfd_mach_arm_9.
+ Also Update bfd_mach_arm_unknown to use new macro ARM_ARCH_UNKNOWN.
+
+2021-11-01 Mike Frysinger <vapier@gentoo.org>
+
+ sim: iq2000: reduce -Wno-error scope
+ Clean up the warnings in sim-if, then reduce the -Werror disable to
+ the files that still aren't clean that now that we require GNU make
+ and can set variables on a per-object basis.
+
+ sim: lm32: reduce -Wno-error scope
+ Clean up some warnings in dv-lm32cpu, and all in sim-if, then reduce
+ the -Werror disable to the files that still aren't clean that now that
+ we require GNU make and can set variables on a per-object basis.
+
+ sim: frv: reduce -Wno-error scope
+ Only two files in here still generates warnings, so reduce the -Werror
+ disable to that now that we require GNU make and can set variables on
+ a per-object basis.
+
+ sim: m32r: reduce -Wno-error scope
+ Only two files in here still generates warnings, so reduce the -Werror
+ disable to that now that we require GNU make and can set variables on
+ a per-object basis.
+
+ sim: mips: reduce -Wno-error scope
+ Fix a few printf warnings in sim-main.c, and then we're left with only
+ one file in here still generating warnings, so reduce the -Werror
+ disable to that alone now that we require GNU make and can set variables
+ on a per-object basis.
+
+ sim: erc32: reduce -Wno-error scope
+ Only one file in here still generates warnings, so reduce the -Werror
+ disable to that alone now that we require GNU make and can set variables
+ on a per-object basis.
+
+ sim: cris: reduce -Wno-error scope
+ Only two files in here still generates warnings, so reduce the -Werror
+ disable to that now that we require GNU make and can set variables on
+ a per-object basis.
+
+ sim: sh: reduce -Wno-error scope
+ Only one file in here still generates warnings, so reduce the -Werror
+ disable to that alone now that we require GNU make and can set variables
+ on a per-object basis.
+
+ sim: or1k: build with -Werror
+ The only warnings left in this port are a few maybe-uninitialized,
+ but we don't abort the build for them, so turn on -Werror everywhere.
+
+ sim: igen: minor build output alignment fix
+ The custom echo was off by one space relative to all the others.
+
+ sim: ppc: fix the printf fix for 32-bit systems
+ The time delta is a 64-bit value too.
+
+ sim: m68hc11: clean up pointer casts
+ The void *data field is used to past arbitrary data between event
+ handlers, and these are using it to pass an integer. Fix up the
+ casts to avoid using (long) to cast to/from pointers since there
+ is no guarantee that's the right size.
+
+ sim: d10v: clean up pointer casts
+ Use %p to print pointers instead of trying to cast them to longs.
+
+ sim: bfin: cast pointers using uintptr_t
+ We can't assume that sizeof(long) == sizeof(void*), so change all
+ these casts over to uintptr_t.
+
+ sim: ppc: clean up printf format handling
+ Don't blindly cast every possible type to (long). Change to the right
+ printf format specifier whether it be a 64-bit type or a pointer.
+
+ sim: ppc: switch core types to stdint.h types
+ There's no need to define these ourselves anymore, so switch to the
+ stdint.h types. This will be important when we start using PRI*
+ defines with printf formats.
+
+ sim: mn10300: clean up pointer casts
+ The void *data field is used to past arbitrary data between event
+ handlers, and these are using it to pass an enum. Fix up the casts
+ to avoid using (long) to cast to/from pointers since there is no
+ guarantee that's the right size.
+
+ sim: events: clean up trace casts
+ Don't blindly cast every possible type to (long). Change to the right
+ printf format specifier whether it be a 64-bit type or a pointer.
+
+ sim: ppc: handle \r in igen inputs [PR sim/28476]
+ Make sure we consume & ignore \r bytes in inputs in case the file
+ encodings are from a non-LF systems (e.g. Windows).
+
+ sim: ppc: constify strings in igen tooling
+
+2021-11-01 GDB Administrator <gdbadmin@sourceware.org>
+
+ Automatic date update in version.in
+
+2021-10-31 Tom Tromey <tom@tromey.com>
+
+ Fix latent bug in DWARF test case
+ On my branch that replaces the DWARF psymtab reader,
+ dw2-stack-boundary.exp started failing. However, when I look at the
+ output in gdb.log, it is correct:
+
+ file /home/tromey/gdb/build/gdb/testsuite/outputs/gdb.dwarf2/dw2-stack-boundary/dw2-stack-boundary
+ Reading symbols from /home/tromey/gdb/build/gdb/testsuite/outputs/gdb.dwarf2/dw2-stack-boundary/dw2-stack-boundary...
+ During symbol reading: location description stack overflow
+ During symbol reading: location description stack underflow
+
+ What happens to cause the failure is that the two branches in
+ gdb_test_multiple appear in this order:
+
+ -re "\r\nDuring symbol reading: location description stack underflow" {
+ [...]
+ -re "\r\nDuring symbol reading: location description stack overflow" {
+
+ The first one will match the above, without causing the second one to
+ ever match -- leading to a spurious failure.
+
+ Anchoring the regexps seems to fix the problem, and works for the
+ current gdb as well.
+
+2021-10-31 Tom Tromey <tom@tromey.com>
+
+ Fix unittest.exp failure due to 'set debuginfod' addition
+ The 'set debuginfod' change caused a regression in unittest.exp:
+
+ Running selftest help_doc_invariants.
+ help doc broken invariant: command 'info set debuginfod' help doc first line is not terminated with a '.' character
+ help doc broken invariant: command 'set debuginfod' help doc first line is not terminated with a '.' character
+ help doc broken invariant: command 'show debuginfod' help doc first line is not terminated with a '.' character
+ Self test failed: self-test failed at ../../binutils-gdb/gdb/unittests/command-def-selftests.c:100
+
+ This patch fixes the problem. I'm checking it in.
+
+2021-10-31 Mike Frysinger <vapier@gentoo.org>
+
+ sim: ppc: use silent build rules here too
+ The ppc codebase is unique and doesn't leverage common/, so have to
+ add silent rules to it specifically.
+
+ sim: rl78: drop obsolete manual dependency rules
+ We have GNU make generate these for us automatically now, so there's
+ no need to manually specify any deps.
+
+ sim: drop unused targ-vals.h includes
+ This is used in a few places where it's not needed. Drop the include
+ to avoid the build-time generated header file as we move to drop it.
+
+ sim: unify callback.o building
+ Now that the use of TARGET_xxx defines have been removed, we can move
+ this to the common logic so we only build it once for multi-targets.
+
+ sim: nltvals: pull target open flags out into a dedicated source file
+ Like we just did for pulling out the errno & signal maps, pull out the
+ open flag map into a dedicated common file. All newlib ports are using
+ the same map which makes it easy.
+
+ sim: nltvals: localize TARGET_<open> defines
+ Code should not be using these directly, instead they should be
+ resolving these dynamically via the open_map. Rework the common
+ callback code that was using the defines to use symbolic names
+ instead, and localize some of the defines in the ARM code (since
+ it's a bit unclear how many different APIs it supports currently),
+ then remove the defines out of the header so no new code can rely on
+ them.
+
+ sim: nltvals: pull target signal out into a dedicated source file
+ Like we just did for pulling out the errno map, pull out the signal
+ map into a dedicated common file. All newlib ports are using the
+ same signal map which makes it easy.
+
+2021-10-31 Mike Frysinger <vapier@gentoo.org>
+
+ sim: nltvals: pull target errno out into a dedicated source file
+ The current system maintains a list of target errno constants in the
+ nltvals.def file, then runs a build-time tool to turn that into a C
+ file. This list of errno values is the same for all arches, so we
+ don't need the arch-specific flexibility. Further, these are only
+ for newlib/libgloss environments, which makes it confusing to support
+ other userland runtimes (like Linux). Let's simplify to make this
+ easier to understand & build. We don't namespace the variables yet,
+ but sets up the framework for it.
+
+ Create a new target-newlib-errno.c template file. The template file
+ is hand written, but the inline map is still automatically generated.
+
+ This allows us to move it to the common set of objects so it's only
+ built once in a multi-target build.
+
+ Now we can remove the output from the gentmap build-time tool since
+ it's checked into the tree.
+
+ Then we stop including the errno lists in nltvals.def since nothing
+ uses it.
+
+2021-10-31 Mike Frysinger <vapier@gentoo.org>
+
+ sim: erc32: use silent build rules with sis linkage
+
+2021-10-31 Mike Frysinger <vapier@gentoo.org>
+
+ sim: erc32: fix a few more build warnings
+ Tweak the if indentation & brace style to avoid ambiguous warnings.
+
+ Add ATTRIBUTE_UNUSED to UART functions that aren't used when FAST_UART
+ is defined (which is the default).
+
+2021-10-31 Orgad Shaneh <orgads@gmail.com>
+
+ sim: erc32: fix signedness compatibility and redefinition warnings
+
+2021-10-31 Mike Frysinger <vapier@gentoo.org>
+
+ sim: add arch-specific conditional logic
+ This will make it easy to include arch-specific logic (build files)
+ as we migrate ports to the common top level build.
+
+ sim: v850: delete old gencode logic
+ The v850 port used to have a gencode helper, but it was deleted long
+ ago. Clean up the settings that no longer make sense w/out it.
+
+ sim: common: merge multiple clean commands
+ This provides a minor speedup when cleaning in a multi-target build.
+
+ sim: m32c: tighten up opc2c build output
+ Drop the single debugging line that repeats the command line option,
+ and use the silent build helpers to tighten up output.
+
+ sim: tighten up build regen rules
+ Update the makefile & configure related rules to use the silent
+ build helpers.
+
+ sim: tighten up gencode output
+ Update the gencode rules to use the silent build helpers.
+
+ sim: igen: tighten up build output
+ Add a new stamp helper for quiet builds, and don't dump the command
+ line options when it runs. That isn't standard tool behavior, and
+ doesn't really seem necessary in any way.
+
+ sim: tighten up stamp rules
+ Add a new ECHO_STAMP helper and convert existing stamp code over
+ to it. This is mostly common rules and cgen mloop rules.
+
+ sim: silence stamp touch rules
+ We pretty much never care about these stamp touches, so silence them.
+ Also switch to using $@ when it makes sense.
+
+ sim: standardize move-if-change rules
+ Use the srcroot path and make them all silent.
+
+ sim: mips/v850: remove redundant variable setup
+ The common/Make-common.in fragment already provides these variables.
+
+2021-10-31 Orgad Shaneh <orgads@gmail.com>
+
+ sim: fix compilation on mingw64 [PR sim/28476]
+ ...by reordering includes.
+
+ 1. sim-utils.c
+
+ sim/mips/sim-main.h defines UserMode, while there is a struct in winnt.h
+ which has UserMode as a member. So if sim-main.h is included before winnt.h,
+ compilation fails.
+
+ 2. ppc
+
+ registers.h defines CR, which is used as a member in winnt.h.
+
+ winsock2.h is included by sys/time.h, so sys/time.h has to be included
+ before registers.h.
+
+ Bug: https://sourceware.org/PR28476
+
+2021-10-31 Alan Modra <amodra@gmail.com>
+
+ Don't include coff/pe.h in coff-x86_64.c
+ This (and other) code from coffcode.h is broken for x86_64_coff_vec,
+ and has been ever since support was added in 2006 commit 99ad839030c1
+ Here, bfd_coff_aoutsz must match coff_swap_aouthdr_out otherwise we
+ end up writing garbage.
+
+ /* Note that peicode.h fills in a PEAOUTHDR, not an AOUTHDR.
+ include/coff/pe.h sets AOUTSZ == sizeof (PEAOUTHDR)). */
+ char * buff;
+ bfd_size_type amount = bfd_coff_aoutsz (abfd);
+
+ buff = (char *) bfd_malloc (amount);
+ if (buff == NULL)
+ return false;
+
+ coff_swap_aouthdr_out (abfd, & internal_a, buff);
+ amount = bfd_bwrite (buff, amount, abfd);
+
+ We have removed support for --target=x86_64-coff, likely because it
+ never worked properly, but still produce coff-x86_64.o with
+ --enable-targets=all. This means objcopy can recognize x86_64 COFF
+ files but will write garbage to the output file, a fact found by
+ fuzzers. I suspect x86_64 COFF is still broken after this fix, and
+ mention of coff-x86_64.* should be removed from bfd/Makefile.am.
+
+ * coff-x86_64.c: Don't include coff/pe.h.
+ (COFF_WITH_pex64): Don't define here.
+ * pe-x86_64.c: Include coff/pe.h and other headers.
+ (PEI_HEADERS): Define.
+
+2021-10-31 Alan Modra <amodra@gmail.com>
+
+ Re: PR28420, ecoff fuzzing failures
+ sym_ptr_ptr NULL results in segfaults.
+
+ PR 28420
+ * ecoff.c (ecoff_slurp_reloc_table): Don't leave sym_ptr_ptr NULL.
+
+2021-10-31 Alan Modra <amodra@gmail.com>
+
+ ubsan: alpha-vms: undefined shift
+ * vms-alpha.c (evax_bfd_print_image): Shift left 1u.
+
+ PR28518: signed integer overflow & free on unmalloced address
+ PR 28518
+ * vms-alpha.c (build_module_list): Don't lose malloc buffer address.
+ Use unsigned variables.
+
+2021-10-31 GDB Administrator <gdbadmin@sourceware.org>
+
+ Automatic date update in version.in
+
+2021-10-30 Simon Marchi <simon.marchi@polymtl.ca>
+
+ gdb: fix gdb.gdb/unittest.exp with C++17 compiler
+ On a machine with gcc 11, I get:
+
+ FAIL: gdb.gdb/unittest.exp: test_completion: tab complete "maintenance selftest string_v" (second tab) (timeout)
+ FAIL: gdb.gdb/unittest.exp: test_completion: tab complete "maintenance selftest string_vie" (timeout)
+
+ That's because when compiling with C++ >= 17, we use the standard
+ version of string_view, and don't have a selftest for it. So the list
+ of selftests shown by the tab completion when completing "string_v"
+ differs.
+
+ Change the test to use the copy_* tests instead.
+
+ Change-Id: I85f6aa44ee5fc9652b9bd4451e0506b89773526b
+
+2021-10-30 Aaron Merey <amerey@redhat.com>
+
+ gdb.texinfo: Expand documentation for debuginfod
+ Add section describing GDB's usage of debuginfod.
+
+ Refer to this new section in the description of the '--with-debuginfod'
+ configure option.
+
+ Mention debuginfod in the 'Separate Debug Files' section.
+
+2021-10-30 Aaron Merey <amerey@redhat.com>
+
+ gdb: add set/show commands for managing debuginfod
+ Add 'set debuginfod' command. Accepts 'on', 'off' or 'ask' as an
+ argument. 'on' enables debuginfod for the current session. 'off'
+ disables debuginfod for the current session. 'ask' will prompt
+ the user to either enable or disable debuginfod when the next query
+ is about to be performed:
+
+ This GDB supports auto-downloading debuginfo from the following URLs:
+ <URL1> <URL2> ...
+ Enable debuginfod for this session? (y or [n]) y
+ Debuginfod has been enabled.
+ To make this setting permanent, add 'set debuginfod on' to .gdbinit.
+
+ For interactive sessions, 'ask' is the default. For non-interactive
+ sessions, 'off' is the default.
+
+ Add 'show debuginfod status' command. Displays whether debuginfod
+ is set to 'on', 'off' or 'ask'.
+
+ Add 'set/show debuginfod urls' commands. Accepts a string of
+ space-separated debuginfod server URLs to be queried. The default
+ value is copied from the DEBUGINFOD_URLS environment variable.
+
+ Finally add 'set/show debuginfod verbose' commands to control whether
+ debuginfod-related output is displayed. Verbose output is enabled
+ by default.
+
+ (gdb) run
+ Starting program: /bin/sleep 5
+ Download failed: No route to host. Continuing without debug info for /lib64/libc.so.6.
+
+ If GDB is not built with debuginfod then these commands will just display
+
+ Support for debuginfod is not compiled into GDB.
+
+2021-10-30 GDB Administrator <gdbadmin@sourceware.org>
+
+ Automatic date update in version.in
+
+2021-10-29 Simon Marchi <simon.marchi@polymtl.ca>
+
+ gdb: remove TYPE_FIELD_DWARF_BLOCK
+ Remove TYPE_FIELD_DWARF_BLOCK, replace with type::field +
+ field::loc_dwarf_block.
+
+ Change-Id: I10af9410bb5f46d342b8358a7956998c7e804b64
+
+2021-10-29 Simon Marchi <simon.marchi@polymtl.ca>
+
+ gdb: remove TYPE_FIELD_STATIC_PHYSADDR
+ Remove TYPE_FIELD_STATIC_PHYSADDR replace with type::field +
+ field::loc_physaddr.
+
+ Change-Id: Ica9bc4a48f34750ec82ec86c298d3ecece81bcbd
+
+2021-10-29 Simon Marchi <simon.marchi@polymtl.ca>
+
+ gdb: remove TYPE_FIELD_STATIC_PHYSNAME
+ Remove TYPE_FIELD_STATIC_PHYSNAME, replace with type::field +
+ field::loc_physname.
+
+ Change-Id: Ie35d446b67dd1d02f39998b406001bdb7e6d5abb
+
+2021-10-29 Simon Marchi <simon.marchi@polymtl.ca>
+
+ gdb: remove TYPE_FIELD_ENUMVAL
+ Remove TYPE_FIELD_ENUMVAL, replace with type::field +
+ field::loc_enumval.
+
+ Change-Id: I2ada73e4635aad3363ce2eb22c1dc52698ee2072
+
+2021-10-29 Simon Marchi <simon.marchi@polymtl.ca>
+
+ gdb: remove TYPE_FIELD_BITPOS
+ Remove TYPE_FIELD_BITPOS, replace its uses with type::field +
+ field::loc_bitpos.
+
+ Change-Id: Iccd8d5a77e5352843a837babaa6bd284162e0320
+
+2021-10-29 Simon Marchi <simon.marchi@polymtl.ca>
+
+ gdb: remove TYPE_FIELD_LOC_KIND
+ Remove TYPE_FIELD_LOC_KIND, replace its uses with type::field +
+ field::loc_kind.
+
+ Change-Id: Ib124a26365df82ac1d23df7962d954192913bd90
+
+2021-10-29 Simon Marchi <simon.marchi@polymtl.ca>
+
+ gdb: remove FIELD_DWARF_BLOCK macro
+ Remove FIELD_DWARF_BLOCK, replace its uses with field::loc_dwarf_block.
+
+ Change-Id: I66b7d6a960cb5e341e61e21bd3cc9a6ac26de6a8
+
+2021-10-29 Simon Marchi <simon.marchi@polymtl.ca>
+
+ gdb: remove FIELD_STATIC_PHYSADDR macro
+ Remove FIELD_LOC_KIND_PHYSADDR, replace its uses with
+ field::loc_physaddr.
+
+ Change-Id: Ifd8b2bdaad75f42bfb1404ef8c396ffe7e10ac55
+
+2021-10-29 Simon Marchi <simon.marchi@polymtl.ca>
+
+ gdb: remove FIELD_STATIC_PHYSNAME macro
+ Remove FIELD_STATIC_PHYSNAME, replace its uses with field::loc_physname.
+
+ Change-Id: Iaa8952410403b4eb5bbd68411feea27e2405d657
+
+2021-10-29 Simon Marchi <simon.marchi@polymtl.ca>
+
+ gdb: remove FIELD_ENUMVAL macro
+ Remove FIELD_ENUMVAL, replace its uses with field::loc_enumval.
+
+ Change-Id: Id4861cee91a8bb583a9836f1aa5da0a320fbf4d9
+
+2021-10-29 Simon Marchi <simon.marchi@polymtl.ca>
+
+ gdb: remove FIELD_BITPOS macro
+ Remove FIELD_BITPOD, replace its uses with field::loc_bitpos.
+
+ Change-Id: Idb99297e0170661254276c206383a7e9bf1a935a
+
+2021-10-29 Simon Marchi <simon.marchi@polymtl.ca>
+
+ gdb: remove FIELD_LOC_KIND macro
+ Remove FIELD_LOC_KIND, replace its uses with field::loc_kind or
+ call_site_target::loc_kind.
+
+ Change-Id: I0368d8c3ea269d491bb215aa70e32edbdf55f389
+
+2021-10-29 Tom Tromey <tromey@adacore.com>
+
+ Add gdb.Architecture.integer_type Python function
+ This adds a new Python function, gdb.Architecture.integer_type, which
+ can be used to look up an integer type of a given size and
+ signed-ness. This is useful to avoid dependency on debuginfo when a
+ particular integer type would be useful.
+
+ v2 moves this to be a method on gdb.Architecture and addresses other
+ review comments.
+
+2021-10-29 Tom Tromey <tromey@adacore.com>
+
+ Remove ada_value_print_inner
+ I noticed that the only caller of ada_value_print_inner is
+ valprint.c:do_val_print (via ada_language::value_print_inner), meaning
+ that the try/catch logic in this function is redundant. This patch
+ removes the wrapper function.
+
+ Regression tested on x86-64 Fedora 34.
+
+2021-10-29 Tom Tromey <tromey@adacore.com>
+
+ Document resolve_dynamic_type oddity
+ Today I re-learned that resolve_dynamic_type can return a type for
+ which is_dynamic_type returns true. This can happen for an array
+ whose elements have dynamic type -- the array is reported as dynamic,
+ but resolving the elements would be incorrect, because each element
+ might have a different type after resolution.
+
+ You can see the special case in resolve_dynamic_array_or_string:
+
+ if (ary_dim != NULL && ary_dim->code () == TYPE_CODE_ARRAY)
+ ...
+ else
+ ...
+
+ I looked into having the TYPE_CODE_ARRAY case in
+ is_dynamic_type_internal follow this same logic, but that breaks down
+ on the gdb.fortran/dynamic-ptype-whatis.exp test case. In particular
+ this code in fortran_undetermined::evaluate:
+
+ value *callee = std::get<0> (m_storage)->evaluate (nullptr, exp, noside);
+ if (noside == EVAL_AVOID_SIDE_EFFECTS
+ && is_dynamic_type (value_type (callee)))
+ callee = std::get<0> (m_storage)->evaluate (nullptr, exp, EVAL_NORMAL);
+
+ ... relies on is_dynamic_type returning true for such an array.
+
+ I wasn't really sure of the best way to fix this, so in the meantime I
+ wrote this patch, which documents the oddity so that I might have a
+ chance of remembering this in the future.
+
+2021-10-29 Tom Tromey <tromey@adacore.com>
+
+ Avoid self-test failures on x86-linux
+ The disassembly tests in "maint selftest" will fail on x86-linux.
+ This happens because opcodes rejects an attempt to disassemble for an
+ arch with a 64-bit address size when bfd_vma is 32-bit.
+
+ This patch avoids this problem by avoiding the test in this case. I
+ chose to do it this way because this seems to be the only situation
+ where opcodes checks the size of bfd_vma.
+
+ For v2 of this patch, I've also updated memory_error_test to do the
+ same thing. This is needed due to the "improve error reporting from
+ the disassembler" patch.
+
+2021-10-29 Tom de Vries <tdevries@suse.de>
+
+ [gdb/build] Fix build with --disable-unit-tests
+ A build with --disable-unit-tests currently run into:
+ ...
+ ld: maint.o: in function \
+ `maintenance_selftest_completer(cmd_list_element*, completion_tracker&,
+ char const*, char const*)':
+ src/gdb/maint.c:1183: undefined reference to \
+ `selftests::for_each_selftest(
+ gdb::function_view<
+ void (std::__cxx11::basic_string<char,std::char_traits<char>,
+ std::allocator<char> > const&)>)'
+ ...
+
+ Fix this by guarding the call to selftests::for_each_selftest in
+ maintenance_selftest_completer with GDB_SELF_TEST, such that the "-verbose"
+ completion still works.
+
+ Rebuild on x86_64-linux and ran gdb.gdb/unittest.exp.
+
+2021-10-29 Enze Li <lienze2010@hotmail.com>
+
+ Document "memory-tag-violations".
+ * gdb/doc/gdb.texinfo: (Data): Document '-memory-tag-violations'.
+ (Command Options): Update the example.
+
+2021-10-29 Tejas Belagod <tejas.belagod@arm.com>
+
+ Support for a new pacbti unwind opcode.
+ This patch adds readelf support for decoding the exception table
+ opcode for restoring the RA_AUTH_CODE pseudo register defined by the
+ EHABI
+ (https://github.com/ARM-software/abi-aa/releases/download/2021Q1/ehabi32.pdf
+ Section 10.3).
+
+ * readelf.c (decode_arm_unwind_bytecode): Add support to decode
+ restoring RA_AUTH_CODE pseudo register.
+
+2021-10-29 Alan Modra <amodra@gmail.com>
+
+ Re: arm: add unwinder encoding support for PACBTI
+ Move the gas testsuite files to where they belong.
+
+2021-10-29 Alan Modra <amodra@gmail.com>
+
+ ELF core file size checks
+ Catch fuzzed segments where p_offset + p_filesz wraps, and limit error
+ output.
+
+ * elfcore.h (elf_core_file_p): Rewrite segment checks using
+ bfd_get_file_size. Set read_only on file size errors.
+ * elfcode.h (elf_swap_shdr_in): Don't repeat error message.
+
+2021-10-29 Alan Modra <amodra@gmail.com>
+
+ obcopy vs. files with silly section alignment
+ We already ignore stupid segment alignment when rewriting headers,
+ ignore section alignment too.
+
+ * elf.c (rewrite_elf_program_header): Ignore section alignment
+ power greater than 62.
+
+2021-10-29 GDB Administrator <gdbadmin@sourceware.org>
+
+ Automatic date update in version.in
+
+2021-10-28 Stafford Horne <shorne@gmail.com>
+
+ gdb: Add OpenRISC gdbserver and native config news
+ The previous patches added gdbserver and native debugging support
+ for OpenRISC targets. This patch documents that in the news.
+
+ gdb: or1k: add single step for linux native debugging
+ Needed for single stepping in Linux, this adds the or1k implementation
+ of or1k_software_single_step. Most of the implementation is borrowed
+ from the bare metal single step code from or1k_single_step_through_delay
+ which has been extracted and shared in helper function
+ or1k_delay_slot_p.
+
+2021-10-28 Stafford Horne <shorne@gmail.com>
+
+ gdb: or1k: add native linux support
+ This patch adds support for running gdb natively on OpenRISC linux.
+ Debugging support is provided via the linux PTRACE interface which is
+ mostly handled by GDB genric code. This patch provides the logic of how
+ to read and write the ptrace registers between linux and GDB.
+
+ Single stepping is privided in a separate patch.
+
+2021-10-28 Stafford Horne <shorne@gmail.com>
+
+ gdb: or1k: add generated linux descriptor file
+
+ gdb: or1k: fixup linux regcache comment
+ The old comment was not properly updated from the RISC-V example used.
+ Update it to match OpenRISC.
+
+2021-10-28 Stafford Horne <shorne@gmail.com>
+
+ gdb: or1k: implement gdb server
+ This patch adds gdbserver support for OpenRISC. This has been used for
+ debugging the glibc port that in being worked on here:
+
+ https://github.com/openrisc/or1k-glibc/tree/or1k-port-2
+
+ Hence the comment about registers definitions being inline with glibc.
+
+2021-10-28 Christian Biesinger <cbiesinger@google.com>
+
+ [sim] Include defs.h in ppc/hw_memory.c
+ To fix this error (seen on cygwin):
+ /../../sim/ppc/../common ../../../sim/ppc/hw_memory.c
+ In file included from ../../gnulib/import/stdlib.h:100,
+ from ../../../sim/ppc/hw_memory.c:28:
+ ../../gnulib/import/unistd.h:663:3: error: #error "Please include config.h first."
+ 663 | #error "Please include config.h first."
+ | ^~~~~
+ ../../gnulib/import/unistd.h:665:24: error: expected ';' before 'extern'
+ 665 | _GL_INLINE_HEADER_BEGIN
+ | ^
+ | ;
+ ../../gnulib/import/unistd.h:2806:22: error: expected ';' before 'extern'
+ 2806 | _GL_INLINE_HEADER_END
+ | ^
+ | ;
+
+2021-10-28 Markus Klein <markus.klein@sma.de>
+
+ ARM assembler: Allow up to 32 single precision registers in the VPUSH and VPOP instructions.
+ PR 28436
+ * config/tc-arm.c (do_vfp_nsyn_push_pop_check): New function.
+ (do_vfp_nsyn_pop): Use the new function.
+ (do_vfp_nsyn_push): Use the new function.
+ * testsuite/gas/arm/v8_1m-mve.s: Add new instructions.
+ * testsuite/gas/arm/v8_1m-mve.d: Updated expected disassembly.
+
+2021-10-28 Simon Marchi <simon.marchi@efficios.com>
+
+ gdb: use ptid_t::to_string in infrun debug messages
+ In debug messages, I think it would be more helpful to print ptid using
+ the simple "pid.lwp.tid" notation in infrun debug messages. I am
+ currently debugging some fork issues, and find the pid_to_str output not
+ so useful, as it doesn't tell which process a thread belongs to.
+
+ It currently shows up like this:
+
+ [infrun] resume_1: step=1, signal=GDB_SIGNAL_0, trap_expected=0, current thread [Thread 0x7ffff7d95740 (LWP 892942)] at 0x55555555521f
+
+ With the patch, it shows up like this:
+
+ [infrun] resume_1: step=1, signal=GDB_SIGNAL_0, trap_expected=1, current thread [894072.894077.0] at 0x5555555551d9
+
+ Change-Id: I130796d7dfb0d8e763b8358d8a6002701d80c4ea
+
+2021-10-28 Simon Marchi <simon.marchi@polymtl.ca>
+
+ gdb: add selftest name completion
+ After the previous commit, it is easy to add completion for selftest
+ names. Again, this is not particularly high value, but I rarely touched
+ completion, so it served as a simple example to get some practice.
+
+ Change the for_each_selftest_ftype parameter to gdb::function_view, so
+ that we can pass a lambda that captures things.
+
+ Change-Id: I87cac299ddca9ca7eb0ffab78342e850a98d954c
+
+2021-10-28 Tejas Belagod <Tejas.Belagod@arm.com>
+
+ arm: add unwinder encoding support for PACBTI
+ This patch adds support for encoding the Return Address Authentication pseudo
+ register - '.save {ra_auth_code}' as defined by the DWARF ABI - in the
+ exception tables where the opcode is defined by the EHABI
+
+ gas/Changelog:
+
+ * config/tc-arm.c (arm_reg_type): Add new type REG_TYPE_PSEUDO.
+ (reg_expected_msgs): Add message for pseudo reg type.
+ (reg_list_els): Add new reg list type REGLIST_PSEUDO.
+ (parse_reg_list): Handle new REGLIST_PSEUDO type.
+ (s_arm_unwind_save_pseudo): Encode pseudo reg list save in exception
+ tables.
+ (s_arm_unwind_save): Handle new REG_TYPE_PSEUDO.
+ (reg_names): Add ra_auth_code pseudo register.
+ * testsuite/gas/arm/unwind-pacbti-m.s: New test.
+ * testsuite/gas/arm/unwind-pacbti-m.d: New test.
+ * testsuite/gas/arm/unwind-pacbti-m-readelf.d: New test.
+
+2021-10-28 Simon Marchi <simon.marchi@polymtl.ca>
+
+ gdb: add "maint set/show selftest verbose" commands and use process_options
+ I saw the new -verbose switch to "maint selftests" and thought it would
+ be nice for it to use the option framework. For example, that makes
+ having completion easy. It's not that high value, given this is a
+ maintenance command, but I had never used the framework myself, so it
+ was a good way to practice.
+
+ This patch also adds the "maint set/show selftest verbose" setting. It
+ would be possible to use option framework without adding the setting,
+ but using the framework makes adding the option almost trivial, so I
+ thought why not.
+
+ Change-Id: I6687faa0713ff3da60b398253211777100094144
+
+2021-10-28 Tom de Vries <tdevries@suse.de>
+
+ [gdb/testsuite] Update some test-cases to GPLv3
+ I noticed some files in the test-suite have GPLv2 notices.
+
+ Update these to GPLv3.
+
+2021-10-28 Simon Marchi <simon.marchi@polymtl.ca>
+
+ gdb: add add_setshow_prefix_cmd
+ There's a common pattern to call add_basic_prefix_cmd and
+ add_show_prefix_cmd to add matching set and show commands. Add the
+ add_setshow_prefix_cmd function to factor that out and use it at a few
+ places.
+
+ Change-Id: I6e9e90a30e9efb7b255bf839cac27b85d7069cfd
+
+2021-10-28 Tom de Vries <tdevries@suse.de>
+
+ [gdb/testsuite] Require python in gdb.server/server-kill-python.exp
+ I came across this when running test-case gdb.server/server-kill-python.exp
+ with a gdb configured without python:
+ ...
+ builtin_spawn gdb -nw -nx -data-directory data-directory -iex set height 0 \
+ -iex set width 0 -quiet -iex set height 0 -iex set width 0 \
+ -ex source outputs/gdb.server/server-kill-python/file1.py^M
+ FAIL: gdb.server/server-kill-python.exp: ensure inferior is running
+ Executing on target: kill -9 28535 (timeout = 300)
+ builtin_spawn -ignore SIGHUP kill -9 28535^M
+ file1.py:1: Error in sourced command file:^M
+ Undefined command: "import". Try "help".^M
+ ...
+
+ Fix this by testing for python support in the test-case.
+
+ Tested on aarch64-linux (with python support disabled) and x86_64-linux (with
+ python support enabled).
+
+2021-10-28 Tom de Vries <tdevries@suse.de>
+
+ [gdb/testsuite] Fix assembly comments in gdb.dwarf2/clang-debug-names.exp.tcl
+ On openSUSE Leap 15.2 aarch64 I ran into:
+ ...
+ clang-debug-names-debug.S:72: \
+ Error: junk at end of line, first unrecognized character is `#'
+ ...
+ due to:
+ ...
+ 71 .Ldebug_names_start:
+ 72 .short 5 # Header: version
+ ...
+
+ Fix this by using the /* ... */ comment style instead:
+ ...
+ $ sed -i 's% #\([^"]*\)%/*\1 */%' clang-debug-names.exp.tcl
+ ...
+
+ Tested on aarch64-linux and x86_64-linux.
+
+2021-10-28 Tom de Vries <tdevries@suse.de>
+
+ [gdb/symtab] Handle DW_AT_string_length with location list
+ Consider a fortran routine where a string variable s is modified:
+ ...
+ subroutine f(s)
+ character*(*) s
+ print *, s
+ s(1:3) = 'oof'
+ print *, s
+ end subroutine f
+ ...
+
+ When compiling with optimization level -O1 and printing the type of
+ variable s we get:
+ ...
+ $ gdb -q -batch outputs/gdb.opt/fortran-string/fortran-string \
+ -ex "b f" \
+ -ex run \
+ -ex "ptype s"
+ Breakpoint 1 at 0x4006f7: file fortran-string.f90, line 21.
+
+ Breakpoint 1, f (s=..., _s=_s@entry=3) at fortran-string.f90:21
+ 21 subroutine f(s)
+ type = character*1
+ ...
+ while with -O0 we have instead:
+ ...
+ type = character (3)
+ ...
+
+ The problem is that the type of s is:
+ ...
+ <1><2d6>: Abbrev Number: 21 (DW_TAG_string_type)
+ <2d7> DW_AT_string_length: 0xbf (location list)
+ <2db> DW_AT_byte_size : 4
+ ...
+ where the DW_AT_string_length is a location list, a case that is not handled
+ by attr_to_dynamic_prop.
+
+ Fix this by handling attr->form_is_section_offset () in attr_to_dynamic_prop.
+
+ Tested on x86_64-linux.
+
+ The test-case is based on gdb.opt/fortran-string.exp from
+ https://src.fedoraproject.org/rpms/gdb/raw/f32/f/gdb-archer-vla-tests.patch .
+ I've updated the copyrights to stretch to 2021.
+
+ [ I've tried to create a dwarf assembly test-case for this, but didn't
+ manage. ]
+
+ Co-Authored-By: Jan Kratochvil <jan.kratochvil@redhat.com>
+
+ Bug: https://sourceware.org/bugzilla/show_bug.cgi?id=26910
+
+2021-10-28 Kavitha Natarajan <kavitha.natarajan@amd.com>
+
+ [gdb/testsuite] Initialize anonymous union in gdb.cp/koenig.cc
+ GDB test fails while running the test case gdb.cp/koenig.exp using
+ clang compiler:
+ [...]
+ p foo (p_union)
+ No symbol "p_union" in current context.
+ (gdb) FAIL: gdb.cp/koenig.exp: p foo (p_union)
+ [...]
+
+ In the testcase, "p_union" is an unused/uninitialized variable of
+ anonymous union type. Clang does not emit symbol for unused anonymous
+ union/struct variables at any optimization level. Since the compiler
+ itself is not emitting the symbol for "p_union", debug info is also
+ not emitted when built with debug option. If the anonymous union is
+ initialized (or used), then clang emits the symbol "p_union" which
+ enables emitting debug info for "p_union".
+ [...]
+ p foo (p_union)
+ Cannot resolve function foo to any overloaded instance
+ (gdb) PASS: gdb.cp/koenig.exp: p foo (p_union)
+ [...]
+
+2021-10-28 Alan Modra <amodra@gmail.com>
+
+ asan: mmo: NULL dereferenc in mmo_xore_32
+ mmo_get_loc can return NULL. It's commented even, and that the caller
+ then must handle a split field. mmo_xore_* don't handle split fields,
+ instead just segfault. Stop that happening, and refuse to recognise
+ fuzzed mmo files that trigger this problem.
+
+ * mmo.c (mmo_get_loc): Don't declare inline.
+ (mmo_xore_64, mmo_xore_32, mmo_xore_16): Remove forward decls.
+ Return pointer, don't dereference NULL.
+ (mmo_scan): Return error on mmo_get_loc returning NULL.
+
+2021-10-28 Alan Modra <amodra@gmail.com>
+
+ bfd: remove use of INLINE
+ No need to use anything fancy, plain inline works just as well.
+
+ * bfd-in.h (INLINE): Don't define.
+ * bfd-in2.h: Regenerate.
+ * aoutx.h: Replace use of INLINE with inline.
+ * elf-eh-frame.c: Likewise.
+ * elf32-score7.c: Likewise.
+ * elfxx-mips.c: Likewise.
+ * ihex.c: Likewise.
+ * mach-o.c: Likewise.
+ * mmo.c: Likewise.
+
+2021-10-28 Alan Modra <amodra@gmail.com>
+
+ ASSERT in empty output section with address
+ * ldlang.c (lang_do_assignments_1): Correct "dot" inside ignored
+ sections.
+ * testsuite/ld-scripts/empty-address-4.d,
+ * testsuite/ld-scripts/empty-address-4.s,
+ * testsuite/ld-scripts/empty-address-4.t: New test.
+ * testsuite/ld-scripts/empty-address.exp: Run it.
+
+2021-10-28 GDB Administrator <gdbadmin@sourceware.org>
+
+ Automatic date update in version.in
+
+2021-10-27 Alan Modra <amodra@gmail.com>
+
+ asan: alpha-vms: buffer overflows
+ Yet more anti-fuzzer sanity checking
+
+ * vms-alpha.c (evax_bfd_print_egsd): Sanity check record and
+ name lengths before access.
+ (evax_bfd_print_etir_stc_ir, evax_bfd_print_etir): Likewise.
+
+2021-10-27 Alan Modra <amodra@gmail.com>
+
+ ubsan: arm: undefined shift
+ left shift of 2 by 31 places cannot be represented in type 'int'
+
+ * arm-dis.c (print_insn_thumb16): Avoid undefined behaviour.
+
+2021-10-27 Tom Tromey <tromey@adacore.com>
+
+ Fix watchpoints with multiple threads on Windows
+ A recent internal change pointed out that watchpoints were not working
+ on Windows when the inferior was multi-threaded. This happened
+ because the debug registers were only updated for certain threads --
+ in particular, those that were being resumed and that were not marked
+ as suspended. In the case of single-stepping, the need to update the
+ debug registers in other threads could also be "forgotten".
+
+ This patch changes windows-nat.c to mark all threads needing a debug
+ register update. This brings the code closer to what gdbserver does
+ (though, unfortunately, it still seems more complicated than needed).
+
+2021-10-27 Tom de Vries <tdevries@suse.de>
+
+ [gdb/testsuite] Fix port detection in gdb.debuginfod/fetch_src_and_symbols.exp
+ On OBS I ran into this failure with test-case
+ gdb.debuginfod/fetch_src_and_symbols.exp:
+ ...
+ Failed to listen for connections: Address already in use^M
+ [Thu Oct 21 11:48:49 2021] (559/559): started http server on IPv6 port=8000^M
+ ...
+ FAIL: gdb.debuginfod/fetch_src_and_symbols.exp: local_url: find port timeout
+ ...
+
+ The test-case is trying to start debuginfod on a port to see if it's
+ available, and it handles either this message:
+ "started http server on IPv4 IPv6 port=$port"
+ meaning success, or:
+ "failed to bind to port"
+ meaning failure, in which case the debuginfod instance is killed, and we try
+ the next port.
+
+ The test-case only uses the v4 address 127.0.0.1, so fix this by:
+ - accepting "started http server on IPv4 port=$port"
+ - rejecting "started http server on IPv6 port=$port"
+
+ Tested on x86_64-linux.
+
+2021-10-27 Simon Marchi <simon.marchi@efficios.com>
+
+ gdb: fix value.c build on 32-bits
+ When building on ARM (32-bits), we errors like this:
+
+ /home/smarchi/src/binutils-gdb/gdb/value.c: In function 'gdb::array_view<const unsigned char> value_contents_for_printing(value*)':
+ /home/smarchi/src/binutils-gdb/gdb/value.c:1252:35: error: narrowing conversion of 'length' from 'ULONGEST' {aka 'long long unsigned int'} to 'size_t' {aka 'unsigned int'} [-Werror=narrowing]
+ 1252 | return {value->contents.get (), length};
+ | ^~~~~~
+
+ Fix that by using gdb::make_array_view, which does the appropriate
+ conversion.
+
+ Change-Id: I7d6f2e75d7440d248b8fb18f8272ee92954b404d
+
+2021-10-27 Nelson Chu <nelson.chu@sifive.com>
+
+ RISC-V: Tidy riscv assembler and disassembler.
+ Tidy the gas/config/tc-riscv.c and opcodes/riscv-dis.c, to prepare for
+ moving the released extensions (including released vendor extensions)
+ from integration branch back to mainline.
+
+ * Added parts of missing comments.
+
+ * Updated md_show_usage.
+
+ * For validate_riscv_insn, riscv_ip and print_insn_args, unify the
+ following pointer names,
+ - oparg: pointed to the parsed operand defined in the riscv_opcodes.
+ - asarg: pointed to the parsed operand from assembly.
+ - opargStart: recorded the parsed operand name from riscv_opcodes.
+ - asargStart: recorded the parsed operand name from assembly.
+
+ gas/
+ * config/tc-riscv.c: Added parts of missind comments and updated
+ the md_show_usage.
+ (riscv_multi_subset_supports): Tidy codes.
+ (validate_riscv_insn): Unify the pointer names, oparg, asarg,
+ opargStart and asargStart, to prepare for moving the released
+ extensions from integration branch back to mainline.
+ (riscv_ip): Likewise.
+ (macro_build): Added fmtStart, also used to prepare for moving
+ released extensions.
+ (md_show_usage): Added missing descriptions for new options.
+ opcodes/
+ * riscv-dis.c (print_insn_args): Unify the pointer names,
+ oparg and opargStart, to prepare for moving the released
+ extensions from integration branch back to mainline.
+
+2021-10-27 Maciej W. Rozycki <macro@embecosm.com>
+
+ opcodes: Fix RPATH not being set for dynamic libbfd dependency
+ If built as a shared library, libopcodes has a load-time dependency on
+ libbfd, which is recorded in the dynamic section, however without a
+ corresponding RPATH entry for the directory to find libbfd in. This
+ causes loading to fail whenever libbfd is only pulled by libopcodes
+ indirectly and libbfd has been installed in a directory that is not in
+ the dynamic loader's search path.
+
+ It does not happen with the programs included with binutils or GDB,
+ because they all also pull libbfd when using libopcodes, but it can
+ happen with external software, e.g.:
+
+ $ gdbserver --help
+ gdbserver: error while loading shared libraries: libbfd-[...].so: cannot open shared object file: No such file or directory
+ $
+
+ (not our `gdbserver').
+
+ Indirect dynamic dependencies are handled by libtool automatically by
+ adding RPATH entries as required, however our setup for libopcodes
+ prevents this from happening by linking in libbfd with an explicit file
+ reference sneaked through to the linker directly behind libtool's back
+ via the `-Wl' linker command-line option rather than via `-l' combined
+ with a suitable library search path specified via `-L', as it would be
+ usually the case, or just referring to the relevant .la file in a fully
+ libtool-enabled configuration such as ours.
+
+ According to an observation in the discussion back in 2007[1][2][3] that
+ has led to the current arrangement it is to prevent libtool from picking
+ up the wrong version of libbfd. It does not appear to be needed though,
+ not at least with our current libtool incarnation, as directly referring
+ `libbfd.la' does exactly what it should, as previously suggested[4], and
+ with no link-time reference to the installation directory other than to
+ set RPATH. Uninstalled version of libopcodes has libbfd's build-time
+ location prepended to RPATH too, as also expected.
+
+ Use a direct reference to `libbfd.la' then, making the load error quoted
+ above go away. Alternatively `-L' and `-l' could be used to the same
+ effect, but it seems an unnecessary complication and just another way to
+ circumvent rather than making use of libtool.
+
+ References:
+
+ [1] "compile failure due to undefined symbol",
+ <https://sourceware.org/ml/binutils/2007-08/msg00476.html>
+
+ [2] same, <https://sourceware.org/ml/binutils/2007-09/msg00000.html>
+
+ [3] same, <https://sourceware.org/ml/binutils/2007-10/msg00019.html>
+
+ [4] same, <https://sourceware.org/ml/binutils/2007-10/msg00034.html>
+
+ opcodes/
+ * Makefile.am: Remove obsolete comment.
+ * configure.ac: Refer `libbfd.la' to link shared BFD library
+ except for Cygwin.
+ * Makefile.in: Regenerate.
+ * configure: Regenerate.
+
+2021-10-27 GDB Administrator <gdbadmin@sourceware.org>
+
+ Automatic date update in version.in
+
+2021-10-27 H.J. Lu <hjl.tools@gmail.com>
+
+ gold: Place .note.gnu.property section before other note sections
+ Place the .note.gnu.property section before all other note sections to
+ avoid being placed between other note sections with different alignments.
+
+ PR gold/28494
+ * layout.cc (Layout::create_note): Set order to ORDER_PROPERTY_NOTE
+ for the .note.gnu.property section.
+ * layout.h (Output_section_order): Add ORDER_PROPERTY_NOTE.
+
+2021-10-26 Tom de Vries <tdevries@suse.de>
+
+ [gdb/doc] Fix print inferior-events default
+ In the docs about print inferior-events we read:
+ ...
+ By default, these messages will not be printed.
+ ...
+
+ That used to be the case, but is no longer so since commit f67c0c91715 "Enable
+ 'set print inferior-events' and improve detach/fork/kill/exit messages".
+
+ Fix this by updating the docs.
+
+2021-10-26 GDB Administrator <gdbadmin@sourceware.org>
+
+ Automatic date update in version.in
+
+2021-10-25 Simon Marchi <simon.marchi@polymtl.ca>
+
+ gdb: change functions returning value contents to use gdb::array_view
+ The bug fixed by this [1] patch was caused by an out-of-bounds access to
+ a value's content. The code gets the value's content (just a pointer)
+ and then indexes it with a non-sensical index.
+
+ This made me think of changing functions that return value contents to
+ return array_views instead of a plain pointer. This has the advantage
+ that when GDB is built with _GLIBCXX_DEBUG, accesses to the array_view
+ are checked, making bugs more apparent / easier to find.
+
+ This patch changes the return types of these functions, and updates
+ callers to call .data() on the result, meaning it's not changing
+ anything in practice. Additional work will be needed (which can be done
+ little by little) to make callers propagate the use of array_view and
+ reap the benefits.
+
+ [1] https://sourceware.org/pipermail/gdb-patches/2021-September/182306.html
+
+ Change-Id: I5151f888f169e1c36abe2cbc57620110673816f3
+
+2021-10-25 Simon Marchi <simon.marchi@efficios.com>
+
+ gdbsupport: add assertions in array_view
+ Add assertions to ensure we don't access an array_view out of bounds.
+ Enable these assertions only when _GLIBCXX_DEBUG is set, as we did for
+ gdb::optional.
+
+ Change-Id: Iffaee38252405073735ed123c8e57fde6b2c6be3
+
+2021-10-25 Simon Marchi <simon.marchi@polymtl.ca>
+
+ gdbserver: make target_pid_to_str return std::string
+ I wanted to write a warning that included two target_pid_to_str calls,
+ like this:
+
+ warning (_("Blabla %s, blabla %s"),
+ target_pid_to_str (ptid1),
+ target_pid_to_str (ptid2));
+
+ This doesn't work, because target_pid_to_str stores its result in a
+ static buffer, so my message would show twice the same ptid. Change
+ target_pid_to_str to return an std::string to avoid this. I don't think
+ we save much by using a static buffer, but it is more error-prone.
+
+ Change-Id: Ie3f649627686b84930529cc5c7c691ccf5d36dc2
+
+2021-10-25 H.J. Lu <hjl.tools@gmail.com>
+
+ x86: Also handle stores for -muse-unaligned-vector-move
+ * config/tc-i386.c (encode_with_unaligned_vector_move): Also
+ handle stores.
+ * testsuite/gas/i386/unaligned-vector-move.s: Add stores.
+ * testsuite/gas/i386/unaligned-vector-move.d: Updated.
+ * testsuite/gas/i386/x86-64-unaligned-vector-move.d: Likewise.
+
+2021-10-25 Tom de Vries <tdevries@suse.de>
+
+ [gdb/testsuite] Fix duplicate in gdb.mi/mi-var-cp.exp
+ With test-case gdb.mi/mi-var-cp.exp I run into this duplicate:
+ ...
+ PASS: gdb.mi/mi-var-cp.exp: run to mi-var-cp.cc:104 (set breakpoint)
+ PASS: gdb.mi/mi-var-cp.exp: create varobj for s
+ PASS: gdb.mi/mi-var-cp.exp: create varobj for s
+ DUPLICATE: gdb.mi/mi-var-cp.exp: create varobj for s
+ ...
+
+ This is due to a duplicate test name here:
+ ...
+ $ cat -n gdb/testsuite/gdb.mi/mi-var-cp.cc
+ ...
+ 100 int reference_to_struct ()
+ 101 {
+ 102 /*: BEGIN: reference_to_struct :*/
+ 103 S s = {7, 8};
+ 104 S& r = s;
+ 105 /*:
+ 106 mi_create_varobj S s "create varobj for s"
+ 107 mi_create_varobj R r "create varobj for s"
+ ...
+
+ Fix this by using "create varobj for r" instead.
+
+ Tested on x86_64-linux.
+
+2021-10-25 Nick Alcock <nick.alcock@oracle.com>
+
+ libctf, ld: handle nonrepresentable types better
+ ctf_type_visit (used, among other things, by the type dumping code) was
+ aborting when it saw a nonrepresentable type anywhere: even a single
+ structure member with a nonrepresentable type caused an abort with
+ ECTF_NONREPRESENTABLE. This is not useful behaviour, given that the
+ abort comes from a type-resolution we are only doing in order to
+ determine whether the type is a structure or union. We know
+ nonrepresentable types can't be either, so handle that case and
+ pass the nonrepresentable type down.
+
+ (The added test verifies that the dumper now handles this case and
+ prints nonrepresentable structure members as it already does
+ nonrepresentable top-level types, rather than skipping the whole
+ structure -- or, without the previous commit, skipping the whole types
+ section.)
+
+ ld/ChangeLog
+ 2021-10-25 Nick Alcock <nick.alcock@oracle.com>
+
+ * testsuite/ld-ctf/nonrepresentable-member.*: New test.
+
+ libctf/ChangeLog
+ 2021-10-25 Nick Alcock <nick.alcock@oracle.com>
+
+ * ctf-types.c (ctf_type_rvisit): Handle nonrepresentable types.
+
+2021-10-25 Nick Alcock <nick.alcock@oracle.com>
+
+ libctf: dump: do not stop dumping types on error
+ If dumping of a single type fails, we obviously can't dump it; but just
+ as obviously this doesn't make the other types in the types section
+ invalid or undumpable. So we should not propagate errors seen when
+ type-dumping, but rather ignore them and carry on, so we dump as many
+ types as we can (leaving out the ones we can't grok).
+
+ libctf/ChangeLog
+ 2021-10-25 Nick Alcock <nick.alcock@oracle.com>
+
+ * ctf-dump.c (ctf_dump_type): Do not abort on error.
+
+2021-10-25 Nick Alcock <nick.alcock@oracle.com>
+
+ binutils, ld: make objdump --ctf's parameter optional
+ ld by default (and always, unless adjusted with a hand-rolled linker
+ script) emits deduplicated CTF into the .ctf section. But viewing
+ it needs you to explicitly tell objdump this: it doesn't default
+ its argument, even though what you always end up typing is
+ --ctf=.ctf.
+
+ This is annoying, so make the argument optional.
+
+ binutils/ChangeLog
+ 2021-10-25 Nick Alcock <nick.alcock@oracle.com>
+
+ * objdump.c (usage): --ctf now has an optional argument.
+ (main): Adjust accordingly.
+ (dump_ctf): Default it.
+ * doc/ctf.options.texi: Adjust.
+
+ ld/ChangeLog
+ 2021-10-25 Nick Alcock <nick.alcock@oracle.com>
+
+ * testsuite/ld-ctf/array.d: Change --ctf=.ctf to --ctf.
+ * testsuite/ld-ctf/conflicting-cycle-1.B-1.d: Likewise.
+ * testsuite/ld-ctf/conflicting-cycle-1.B-2.d: Likewise.
+ * testsuite/ld-ctf/conflicting-cycle-1.parent.d: Likewise.
+ * testsuite/ld-ctf/conflicting-cycle-2.A-1.d: Likewise.
+ * testsuite/ld-ctf/conflicting-cycle-2.A-2.d: Likewise.
+ * testsuite/ld-ctf/conflicting-cycle-2.parent.d: Likewise.
+ * testsuite/ld-ctf/conflicting-cycle-3.C-1.d: Likewise.
+ * testsuite/ld-ctf/conflicting-cycle-3.C-2.d: Likewise.
+ * testsuite/ld-ctf/conflicting-cycle-3.parent.d: Likewise.
+ * testsuite/ld-ctf/conflicting-enums.d: Likewise.
+ * testsuite/ld-ctf/conflicting-typedefs.d: Likewise.
+ * testsuite/ld-ctf/cross-tu-cyclic-conflicting.d: Likewise.
+ * testsuite/ld-ctf/cross-tu-cyclic-nonconflicting.d: Likewise.
+ * testsuite/ld-ctf/cross-tu-into-cycle.d: Likewise.
+ * testsuite/ld-ctf/cross-tu-noncyclic.d: Likewise.
+ * testsuite/ld-ctf/cycle-1.d: Likewise.
+ * testsuite/ld-ctf/cycle-2.A.d: Likewise.
+ * testsuite/ld-ctf/cycle-2.B.d: Likewise.
+ * testsuite/ld-ctf/cycle-2.C.d: Likewise.
+ * testsuite/ld-ctf/data-func-conflicted.d: Likewise.
+ * testsuite/ld-ctf/diag-cttname-null.d: Likewise.
+ * testsuite/ld-ctf/diag-cuname.d: Likewise.
+ * testsuite/ld-ctf/diag-parlabel.d: Likewise.
+ * testsuite/ld-ctf/enum-forward.d: Likewise.
+ * testsuite/ld-ctf/enums.d: Likewise.
+ * testsuite/ld-ctf/forward.d: Likewise.
+ * testsuite/ld-ctf/function.d: Likewise.
+ * testsuite/ld-ctf/nonrepresentable.d: Likewise.
+ * testsuite/ld-ctf/slice.d: Likewise.
+ * testsuite/ld-ctf/super-sub-cycles.d: Likewise.
+
+2021-10-25 Nick Alcock <nick.alcock@oracle.com>
+
+ binutils: make objdump/readelf --ctf-parent actually useful
+ This option has been present since the very early days of the
+ development of libctf as part of binutils, and it shows. Back in the
+ earliest days, I thought we might handle ambiguous types by introducing
+ new ELF sections on the fly named things like .ctf.foo.c for ambiguous
+ types found only in foo.c, etc. This turned out to be a terrible idea,
+ so we moved to using a CTF archive in the .ctf section which contained
+ all the CTF dictionaries -- but the --ctf-parent option in objdump and
+ readelf was never adjusted, and lingered as a mechanism to specify CTF
+ parent dictionaries in sections other than .ctf, even though the linker
+ has no way to produce parent dictionaries in different sections from
+ their children, libctf's ctf_open can't handle such split-up
+ parent/child dicts, and they are never found in the wild, emitted by GNU
+ ld or by any known third-party linking tool.
+
+ Meanwhile, the actually-useful ctf_link feature (albeit not used by ld)
+ which lets you remap the names of CTF archive members (so you can end up
+ with a parent archive member named something other than ".ctf", still
+ contained with all its children in a single .ctf section) had no support
+ in objdump or readelf: there was no way to tell them that these members
+ were parents, so all the types in the associated child dicts always
+ appeared corrupted, referencing nonexistent types from a parent objdump
+ couldn't find.
+
+ So adjust --ctf-parent so that rather than taking a section name it
+ takes a member name instead (if not specified, the name is ".ctf", which
+ is what GNU ld emits). Because the option was always useless before
+ now, this is expected to have no backward-compatibility implications.
+
+ As part of this, we have to slightly adjust the code which skips the
+ archive member name if redundant: right now it skips it if it's ".ctf",
+ on the assumption that this name will almost always be at the start
+ of the objdump output and thus we'll end up with a shared dump
+ and then smaller, headed dumps for the per-TU child dicts; but if
+ the parent name has been changed, that won't be true any more.
+
+ So change the rules to "members named .ctf which appear first in the
+ first have their member name skipped". Since we now need to count
+ members, move from ctf_archive_iter (for which passing in extra
+ parameters requires defining a new struct and is clumsy) to
+ ctf_archive_next, allowing us to just *call* dump_ctf_archive_member and
+ maintain a member count in the obvious way. In the process we fix a
+ tiny difference between readelf and objdump: if a ctf_dump ever failed,
+ readelf skipped every later member, while objdump tried to keep going as
+ much as it could. For a dumping tool the former is clearly preferable.
+
+ binutils/ChangeLog
+ 2021-10-25 Nick Alcock <nick.alcock@oracle.com>
+
+ * objdump.c (usage): --ctf-parent now takes a name, not a section.
+ (dump_ctf): Don't open a separate section; use the parent_name in
+ ctf_dict_open instead. Use ctf_archive_next, not ctf_archive_iter,
+ so we can pass down a member count.
+ (dump_ctf_archive_member): Add the member count; don't return
+ anything. Import parents into children no matter what the
+ parent's name, while still avoiding displaying the header for the
+ common parent name of ".ctf".
+ * readelf.c (usage): Adjust similarly.
+ (dump_section_as_ctf): Likewise.
+ (dump_ctf_archive_member): Likewise. Never stop iterating over
+ archive members, even if ctf_dump of one member fails.
+ * doc/ctf.options.texi: Adjust.
+
+2021-10-25 Alan Modra <amodra@gmail.com>
+
+ objdump doesn't accept -L option
+ A followup to commit ca0e11aa4b.
+
+ * objdump.c (main): Add 'L' to short options and sort them.
+
+2021-10-25 Alan Modra <amodra@gmail.com>
+
+ bfd_nonfatal_message, localise va_start
+ Nothing to see here, just a little tidier.
+
+ * bucomm.c (bfd_nonfatal_message): Localise va_list args.
+
+2021-10-25 Alan Modra <amodra@gmail.com>
+
+ ubsan: _bfd_xcoff64_swap_aux_in left shift of negative value
+ * coff64-rs6000.c (_bfd_xcoff64_swap_aux_in): Use bfd_vma for h.
+
+ asan: evax_bfd_print_image buffer overflow
+ * vms-alpha.c (evax_bfd_print_image): Sanity check printing of
+ "image activator fixup" section.
+ (evax_bfd_print_relocation_records): Sanity check buffer offsets.
+ (evax_bfd_print_address_fixups): Likewise.
+ (evax_bfd_print_reference_fixups): Likewise.
+
+2021-10-25 GDB Administrator <gdbadmin@sourceware.org>
+
+ Automatic date update in version.in
+
+2021-10-24 Alan Modra <amodra@gmail.com>
+
+ asan: c4x, c54x coff_canonicalize_reloc buffer overflow
+ Sometimes the investigation of a fuzzing bug report leads into areas
+ you'd rather not go. In this instance by the time I'd figured out the
+ real cause was a target variant that had never been properly supported
+ in binutils, the time needed to fix it was less than the time needed
+ to rip it out.
+
+ * coffcode.h (coff_set_alignment_hook): Call bfd_coff_swap_reloc_in
+ not coff_swap_reloc_in.
+ (coff_slurp_reloc_table): Likewise. Don't use RELOC type.
+ (ticoff0_swap_table): Use coff_swap_reloc_v0_out and
+ coff_swap_reloc_v0_in.
+ * coffswap.h (coff_swap_reloc_v0_in, coff_swap_reloc_v0_out): New.
+ * coff-tic54x.c (tic54x_lookup_howto): Don't abort.
+ * coffgen.c (coff_get_normalized_symtab): Use PTR_ADD.
+ * bfd-in.h (PTR_ADD, NPTR_ADD): Avoid warnings when passing an
+ expression.
+ * bfd-in2.h: Regenerate.
+
+2021-10-24 Alan Modra <amodra@gmail.com>
+
+ asan: arm-darwin: buffer overflow
+ PR 21813
+ * mach-o-arm.c (bfd_mach_o_arm_canonicalize_one_reloc): Sanity
+ check PAIR reloc in other branch of condition as was done for
+ PR21813. Formatting. Delete debug printf.
+
+ asan: aout: heap buffer overflow
+ * aoutx.h (aout_get_external_symbols): Sanity check before writing
+ zero index entry. Remove outdated comment.
+ * pdp11.c (aout_get_external_symbols): Likewise.
+
+2021-10-24 liuzhensong <liuzhensong@loongson.cn>
+
+ LoongArch ld support
+ 2021-10-22 Chenghua Xu <xuchenghua@loongson.cn>
+ Zhensong Liu <liuzhensong@loongson.cn>
+ Weinan Liu <liuweinan@loongson.cn>
+ Xiaolin Tang <tangxiaolin@loongson.cn>
+
+ ld/
+ * Makefile.am: Add LoongArch.
+ * NEWS: Mention LoongArch support.
+ * configure.tgt: Add LoongArch.
+ * emulparams/elf32loongarch-defs.sh: New.
+ * emulparams/elf32loongarch.sh: Likewise.
+ * emulparams/elf64loongarch-defs.sh: Likewise.
+ * emulparams/elf64loongarch.sh: Likewise.
+ * emultempl/loongarchelf.em: Likewise.
+ * Makefile.in: Regenerate.
+ * po/BLD-POTFILES.in: Regenerate.
+ ld/testsuite/
+ * ld-loongarch-elf/disas-jirl.d: New.
+ * ld-loongarch-elf/disas-jirl.s: Likewise.
+ * ld-loongarch-elf/jmp_op.d: Likewise.
+ * ld-loongarch-elf/jmp_op.s: Likewise.
+ * ld-loongarch-elf/ld-loongarch-elf.exp: Likewise.
+ * ld-loongarch-elf/macro_op.d: Likewise.
+ * ld-loongarch-elf/macro_op.s: Likewise.
+ * ld-loongarch-elf/syscall-0.s: Likewise.
+ * ld-loongarch-elf/syscall-1.s: Likewise.
+ * ld-loongarch-elf/syscall.d: Likewise.
+ * ld-srec/srec.exp: Add LoongArch.
+ * ld-unique/pr21529.d: Likewise.
+
+2021-10-24 liuzhensong <liuzhensong@loongson.cn>
+
+ LoongArch gas support
+ 2021-10-22 Chenghua Xu <xuchenghua@loongson.cn>
+ Zhensong Liu <liuzhensong@loongson.cn>
+ Weinan Liu <liuweinan@loongson.cn>
+ Xiaolin Tang <tangxiaolin@loongson.cn>
+
+ gas/
+ * Makefile.am: Add LoongArch.
+ * NEWS: Mention LoongArch support.
+ * config/loongarch-lex-wrapper.c: New.
+ * config/loongarch-lex.h: New.
+ * config/loongarch-lex.l: New.
+ * config/loongarch-parse.y: New.
+ * config/tc-loongarch.c: New.
+ * config/tc-loongarch.h: New.
+ * configure.ac: Add LoongArch.
+ * configure.tgt: Likewise.
+ * doc/as.texi: Likewise.
+ * doc/c-loongarch.texi: Likewise.
+ * Makefile.in: Regenerate.
+ * configure: Regenerate.
+ * po/POTFILES.in: Regenerate.
+ gas/testsuite/
+ * gas/all/gas.exp: Add LoongArch.
+ * gas/elf/elf.exp: Likewise.
+ * gas/loongarch/4opt_op.d: New.
+ * gas/loongarch/4opt_op.s: Likewise.
+ * gas/loongarch/fix_op.d: Likewise.
+ * gas/loongarch/fix_op.s: Likewise.
+ * gas/loongarch/float_op.d: Likewise.
+ * gas/loongarch/float_op.s: Likewise.
+ * gas/loongarch/imm_op.d: Likewise.
+ * gas/loongarch/imm_op.s: Likewise.
+ * gas/loongarch/jmp_op.d: Likewise.
+ * gas/loongarch/jmp_op.s: Likewise.
+ * gas/loongarch/load_store_op.d: Likewise.
+ * gas/loongarch/load_store_op.s: Likewise.
+ * gas/loongarch/loongarch.exp: Likewise.
+ * gas/loongarch/macro_op.d: Likewise.
+ * gas/loongarch/macro_op.s: Likewise.
+ * gas/loongarch/nop.d: Likewise.
+ * gas/loongarch/nop.s: Likewise.
+ * gas/loongarch/privilege_op.d: Likewise.
+ * gas/loongarch/privilege_op.s: Likewise.
+ * gas/loongarch/syscall.d: Likewise.
+ * gas/loongarch/syscall.s: Likewise.
+ * lib/gas-defs.exp: Add LoongArch.
+
+2021-10-24 liuzhensong <liuzhensong@loongson.cn>
+
+ LoongArch binutils support
+ 2021-10-22 Chenghua Xu <xuchenghua@loongson.cn>
+ Zhensong Liu <liuzhensong@loongson.cn>
+ Weinan Liu <liuweinan@loongson.cn>
+ binutils/
+ * NEWS: Mention LoongArch support.
+ * readelf.c: Add LoongArch.
+ * testsuite/binutils-all/objdump.exp: Add LoongArch.
+
+2021-10-24 liuzhensong <liuzhensong@loongson.cn>
+
+ LoongArch opcodes support
+ 2021-10-22 Chenghua Xu <xuchenghua@loongson.cn>
+ Zhensong Liu <liuzhensong@loongson.cn>
+ Weinan Liu <liuweinan@loongson.cn>
+
+ include/
+ * opcode/loongarch.h: New.
+ * dis-asm.h: Declare print_loongarch_disassembler_options.
+ opcodes/
+ * Makefile.am: Add LoongArch.
+ * configure.ac: Likewise.
+ * disassemble.c: Likewise.
+ * disassemble.h: Declare print_insn_loongarch.
+ * loongarch-coder.c: New.
+ * loongarch-dis.c: New.
+ * loongarch-opc.c: New.
+ * Makefile.in: Regenerate.
+ * configure: Regenerate.
+ * po/POTFILES.in: Regenerate.
+
+2021-10-24 liuzhensong <liuzhensong@loongson.cn>
+
+ LoongArch bfd support
+ 2021-10-22 Chenghua Xu <xuchenghua@loongson.cn>
+ Zhensong Liu <liuzhensong@loongson.cn>
+ Weinan Liu <liuweinan@loongson.cn>
+ bfd/
+ * Makefile.am: Add LoongArch.
+ * archures.c: Likewise.
+ * config.bfd: Likewise.
+ * configure.ac: Likewise.
+ * cpu-loongarch.c: New.
+ * elf-bfd.h: Add LoongArch.
+ * elf.c: Add LoongArch elfcore_grok_xxx.
+ * elfnn-loongarch.c: New.
+ * elfxx-loongarch.c: New.
+ * elfxx-loongarch.h: New.
+ * reloc.c: Add LoongArch BFD RELOC ENUM.
+ * targets.c: Add LoongArch target.
+ * Makefile.in: Regenerate.
+ * bfd-in2.h: Regenerate.
+ * configure: Regenerate.
+ * libbfd.h: Regenerate.
+ * po/BLD-POTFILES.in: Regenerate.
+ * po/SRC-POTFILES.in: Regenerate.
+
+ include/
+ * elf/common.h: Add NT_LARCH_{CPUCFG,CSR,LSX,LASX}.
+ * elf/loongarch.h: New.
+
+2021-10-24 GDB Administrator <gdbadmin@sourceware.org>
+
+ Automatic date update in version.in
+
+2021-10-23 GDB Administrator <gdbadmin@sourceware.org>
+
+ Automatic date update in version.in
+
+2021-10-22 H.J. Lu <hjl.tools@gmail.com>
+
+ x86: Add -muse-unaligned-vector-move to assembler
+ Unaligned load/store instructions on aligned memory or register are as
+ fast as aligned load/store instructions on modern Intel processors. Add
+ a command-line option, -muse-unaligned-vector-move, to x86 assembler to
+ encode encode aligned vector load/store instructions as unaligned
+ vector load/store instructions.
+
+ * NEWS: Mention -muse-unaligned-vector-move.
+ * config/tc-i386.c (use_unaligned_vector_move): New.
+ (encode_with_unaligned_vector_move): Likewise.
+ (md_assemble): Call encode_with_unaligned_vector_move for
+ -muse-unaligned-vector-move.
+ (OPTION_MUSE_UNALIGNED_VECTOR_MOVE): New.
+ (md_longopts): Add -muse-unaligned-vector-move.
+ (md_parse_option): Handle -muse-unaligned-vector-move.
+ (md_show_usage): Add -muse-unaligned-vector-move.
+ * doc/c-i386.texi: Document -muse-unaligned-vector-move.
+ * testsuite/gas/i386/i386.exp: Run unaligned-vector-move and
+ x86-64-unaligned-vector-move.
+ * testsuite/gas/i386/unaligned-vector-move.d: New file.
+ * testsuite/gas/i386/unaligned-vector-move.s: Likewise.
+ * testsuite/gas/i386/x86-64-unaligned-vector-move.d: Likewise.
+
+2021-10-22 Tom Tromey <tromey@adacore.com>
+
+ Fix 'uninstall' target
+ This adds some missing code to the 'uninstall' targets in gdb and
+ gdbserver. It also changes gdb's uninstall target so that it no
+ longer tries to remove any man page -- this is already done (and more
+ correctly) by doc/Makefile.in.
+
+ I tested this with 'make install' followed by 'make uninstall', then
+ examining the install tree for regular files. Only the 'dir' file
+ remains, but this appears to just be how 'install-info' is intended to
+ work.
+
+2021-10-22 Tom Tromey <tromey@adacore.com>
+
+ Remove unused variables from gdbserver's Makefile
+ This removes a number of unused variables from gdbserver's Makefile.
+ I found these while working on the subsequent patches, and figured it
+ would be cleaner to have a separate patch for the deletions.
+
+2021-10-22 Tom de Vries <tdevries@suse.de>
+
+ [gdb/testsuite] Fix gdb.threads/linux-dp.exp
+ On openSUSE Tumbleweed with glibc-debuginfo installed I get:
+ ...
+ (gdb) PASS: gdb.threads/linux-dp.exp: continue to breakpoint: thread 5's print
+ where^M
+ #0 print_philosopher (n=3, left=33 '!', right=33 '!') at linux-dp.c:105^M
+ #1 0x0000000000401628 in philosopher (data=0x40537c) at linux-dp.c:148^M
+ #2 0x00007ffff7d56b37 in start_thread (arg=<optimized out>) \
+ at pthread_create.c:435^M
+ #3 0x00007ffff7ddb640 in clone3 () \
+ at ../sysdeps/unix/sysv/linux/x86_64/clone3.S:81^M
+ (gdb) PASS: gdb.threads/linux-dp.exp: first thread-specific breakpoint hit
+ ...
+ while without debuginfo installed I get instead:
+ ...
+ (gdb) PASS: gdb.threads/linux-dp.exp: continue to breakpoint: thread 5's print
+ where^M
+ #0 print_philosopher (n=3, left=33 '!', right=33 '!') at linux-dp.c:105^M
+ #1 0x0000000000401628 in philosopher (data=0x40537c) at linux-dp.c:148^M
+ #2 0x00007ffff7d56b37 in start_thread () from /lib64/libc.so.6^M
+ #3 0x00007ffff7ddb640 in clone3 () from /lib64/libc.so.6^M
+ (gdb) FAIL: gdb.threads/linux-dp.exp: first thread-specific breakpoint hit
+ ...
+
+ The problem is that the regexp used:
+ ...
+ "\(from .*libpthread\|at pthread_create\|in pthread_create\)"
+ ...
+ expects the 'from' part to match libpthread, but in glibc 2.34 libpthread has
+ been merged into libc.
+
+ Fix this by updating the regexp.
+
+ Tested on x86_64-linux.
+
+2021-10-22 Tom de Vries <tdevries@suse.de>
+
+ [gdb/testsuite] Fix FAILs in gdb.mi/mi-breakpoint-changed.exp
+ Since commit e36788d1354 "[gdb/testsuite] Fix handling of nr_args < 3 in
+ mi_gdb_test" we run into:
+ ...
+ PASS: gdb.mi/mi-breakpoint-changed.exp: test_auto_disable: mi runto main
+ Expecting: ^(-break-insert -f pendfunc1[^M
+ ]+)?((&.*)*.*~"Breakpoint 2 at.*\\n".*=breakpoint-created,\
+ bkpt=\{number="2",type="breakpoint".*\}.*\n\^done[^M
+ ]+[(]gdb[)] ^M
+ [ ]*)
+ -break-insert -f pendfunc1^M
+ ^done,bkpt={number="2",type="breakpoint",disp="keep",enabled="y",\
+ addr="0x00007ffff7bd559e",func="pendfunc1",\
+ file="gdb/testsuite/gdb.mi/pendshr1.c",\
+ fullname="gdb/testsuite/gdb.mi/pendshr1.c",line="21",thread-groups=["i1"],\
+ times="0",original-location="pendfunc1"}^M
+ (gdb) ^M
+ FAIL: gdb.mi/mi-breakpoint-changed.exp: test_auto_disable: \
+ -break-insert -f pendfunc1 (unexpected output)
+ ...
+
+ The regexp expects a breakpoint-created event, but that's actually suppressed
+ by the command:
+ ...
+ DEF_MI_CMD_MI_1 ("break-insert", mi_cmd_break_insert,
+ &mi_suppress_notification.breakpoint),
+ ...
+
+ Fix this by updating the regexp.
+
+ Likewise for the following:
+ ...
+ PASS: gdb.mi/mi-breakpoint-changed.exp: test_auto_disable: \
+ -break-insert -f pendfunc1
+ Expecting: ^(-break-enable count 1 2[^M
+ ]+)?(=breakpoint-modified,\
+ bkpt=\{number="2",type="breakpoint",disp="dis",enabled="y".*\}.*\n\^done[^M
+ ]+[(]gdb[)] ^M
+ [ ]*)
+ -break-enable count 1 2^M
+ ^done^M
+ (gdb) ^M
+ FAIL: gdb.mi/mi-breakpoint-changed.exp: test_auto_disable: \
+ -break-enable count 1 2 (unexpected out\
+ put)
+ ...
+
+ Tested on x86_64-linux.
+
+2021-10-22 Andrew Burgess <andrew.burgess@embecosm.com>
+
+ gdb/python: move gdb.Membuf support into a new file
+ In a future commit I'm going to be creating gdb.Membuf objects from a
+ new file within gdb/python/py*.c. Currently all gdb.Membuf objects
+ are created directly within infpy_read_memory (as a result of calling
+ gdb.Inferior.read_memory()).
+
+ Initially I split out the Membuf creation code into a new function,
+ and left the new function in gdb/python/py-inferior.c, however, it
+ felt a little random that the Membuf creation code should live with
+ the inferior handling code.
+
+ So, then I moved all of the Membuf related code out into a new file,
+ gdb/python/py-membuf.c, the interface is gdbpy_buffer_to_membuf, which
+ wraps an array of bytes into a gdb.Membuf object.
+
+ Most of the code is moved directly from py-inferior.c with only minor
+ tweaks to layout and replacing NULL with nullptr, hence, I've left the
+ copyright date on py-membuf.c as 2009-2021 to match py-inferior.c.
+
+ Currently, the only user of this code is still py-inferior.c, but in
+ later commits this will change.
+
+ There should be no user visible changes after this commit.
+
+2021-10-22 Andrew Burgess <andrew.burgess@embecosm.com>
+
+ gdb/python: new gdb.architecture_names function
+ Add a new function to the Python API, gdb.architecture_names(). This
+ function returns a list containing all of the supported architecture
+ names within the current build of GDB.
+
+ The values returned in this list are all of the possible values that
+ can be returned from gdb.Architecture.name().
+
+2021-10-22 Andrew Burgess <andrew.burgess@embecosm.com>
+
+ gdb: make disassembler fprintf callback a static member function
+ The disassemble_info structure has four callbacks, we have three of
+ them as static member functions within gdb_disassembler, the fourth is
+ just a global static function.
+
+ However, this fourth callback, is still only used from the
+ disassemble_info struct, so there's no real reason for its special
+ handling.
+
+ This commit makes fprintf_disasm a static method within
+ gdb_disassembler.
+
+ There should be no user visible changes after this commit.
+
+2021-10-22 Lewis Revill <lewis.revill@embecosm.com>
+
+ RISC-V: Added ld testcase for pcgp relaxation.
+ Consider the the pcgp-relax-02 testcase,
+
+ .text
+ .globl _start
+ _start:
+ .L1: auipc a0, %pcrel_hi(data_a)
+ .L2: auipc a1, %pcrel_hi(data_b)
+ addi a0, a0, %pcrel_lo(.L1)
+ addi a1, a1, %pcrel_lo(.L2)
+
+ .data
+ .word 0x0
+ .globl data_a
+ data_a:
+ .word 0x1
+
+ .section .rodata
+ .globl data_b
+ data_b:
+ .word 0x2
+
+ If the first auipc is deleted, but we are still building the pcgp
+ table (connect the high and low pcrel relocations), then there is
+ an aliasing issue that we need some way to disambiguate which of
+ the two symbols we are targeting. Therefore, Palmer thought of a
+ way to use R_RISCV_DELETE to split this into two phases, so we
+ could resolve the addresses before creating the ambiguities.
+
+ This patch just add the ld testcase for the above case, in case we
+ have changed something but break this.
+
+ ld/
+ * testsuite/ld-riscv-elf/ld-riscv-elf.exp: Renamed pcgp-relax
+ to pcgp-relax-01, and added pcgp-relax-02.
+ * testsuite/ld-riscv-elf/pcgp-relax-01.d: Renmaed from pcgp-relax.
+ * testsuite/ld-riscv-elf/pcgp-relax-01.s: Likewise.
+ * testsuite/ld-riscv-elf/pcgp-relax-02.d: New testcase.
+ * testsuite/ld-riscv-elf/pcgp-relax-02.s: Likewise.
+
+2021-10-22 Lewis Revill <lewis.revill@embecosm.com>
+
+ RISC-V: Don't separate pcgp relaxation to another relax pass.
+ Commit abd20cb637008da9d32018b4b03973e119388a0a and
+ ebdcad3fddf6ec21f6d4dcc702379a12718cf0c4 introduced additional
+ complexity into the paths run by the RISC-V relaxation pass in order to
+ resolve the issue of accurately keeping track of pcrel_hi and pcrel_lo
+ pairs. The first commit split up relaxation of these relocs into a pass
+ which occurred after other relaxations in order to prevent the situation
+ where bytes were deleted in between a pcrel_lo/pcrel_hi pair, inhibiting
+ our ability to find the corresponding pcrel_hi relocation from the
+ address attached to the pcrel_lo.
+
+ Since the relaxation was split into two passes the 'again' parameter
+ could not be used to perform the entire relaxation process again and so
+ the second commit added a way to restart ldelf_map_segments, thus
+ starting the whole process again.
+
+ Unfortunately this process could not account for the fact that we were
+ not finished with the relaxation process so in some cases - such as the
+ case where code would not fit in a memory region before the
+ R_RISCV_ALIGN relocation was relaxed - sanity checks in generic code
+ would fail.
+
+ This patch fixes all three of these concerns by reverting back to a
+ system of having only one target relax pass but updating entries in the
+ table of pcrel_hi/pcrel_lo relocs every time any bytes are deleted. Thus
+ we can keep track of the pairs accurately, and we can use the 'again'
+ parameter to restart the entire target relax pass, behaving in the way
+ that generic code expects. Unfortunately we must still have an
+ additional pass to delay deleting AUIPC bytes to avoid ambiguity between
+ pcrel_hi relocs stored in the table after deletion. This pass can only
+ be run once so we may potentially miss out on relaxation opportunities
+ but this is likely to be rare.
+
+ https://sourceware.org/bugzilla/show_bug.cgi?id=28410
+
+ bfd/
+ * elfnn-riscv.c (riscv_elf_link_hash_table): Removed restart_relax.
+ (riscv_elf_link_hash_table_create): Updated.
+ (riscv_relax_delete_bytes): Moved after the riscv_update_pcgp_relocs.
+ Update the pcgp_relocs table whenever bytes are deleted.
+ (riscv_update_pcgp_relocs): Add function to update the section
+ offset of pcrel_hi and pcrel_lo, and also update the symbol value
+ of pcrel_hi.
+ (_bfd_riscv_relax_call): Need to update the pcgp_relocs table
+ when deleting codes.
+ (_bfd_riscv_relax_lui): Likewise.
+ (_bfd_riscv_relax_tls_le): Likewise.
+ (_bfd_riscv_relax_align): Once we've handled an R_RISCV_ALIGN,
+ we can't relax anything else, so set the sec->sec_flg0 to true.
+ Besides, we don't need to update the pcgp_relocs table at this
+ stage, so just pass NULL pointer as the pcgp_relocs table for
+ riscv_relax_delete_bytes.
+ (_bfd_riscv_relax_section): Use only one pass for all target
+ relaxations.
+ (_bfd_riscv_relax_delete): Likewise, we don't need to update
+ the pcgp_relocs table at this stage, and don't need to set
+ the `again' since restart_relax mechanism is abandoned.
+ (bfd_elfNN_riscv_restart_relax_sections): Removed.
+ (_bfd_riscv_relax_section): Updated.
+ * elfxx-riscv.h (bfd_elf32_riscv_restart_relax_sections): Removed.
+ (bfd_elf64_riscv_restart_relax_sections): Likewise.
+ ld/
+ * emultempl/riscvelf.em: Revert restart_relax changes and set
+ relax_pass to 3.
+ * testsuite/ld-riscv-elf/align-small-region.d: New testcase.
+ * testsuite/ld-riscv-elf/align-small-region.ld: Likewise.
+ * testsuite/ld-riscv-elf/align-small-region.s: Likewise.
+ * testsuite/ld-riscv-elf/restart-relax.d: Removed sine the
+ restart_relax mechanism is abandoned.
+ * testsuite/ld-riscv-elf/restart-relax.s: Likewise.
+ * testsuite/ld-riscv-elf/ld-riscv-elf.exp: Updated.
+
+2021-10-22 Simon Marchi <simon.marchi@polymtl.ca>
+
+ gdb: fix remote-sim.c build
+ Commit 183be222907a ("gdb, gdbserver: make target_waitstatus safe")
+ broke the remote-sim.c build. In fact, it does some wrong changes,
+ result of a bad sed invocation.
+
+ Fix it by adjusting the code to the new target_waitstatus API.
+
+ Change-Id: I3236ff7ef7681fc29215f68be210ff4263760e91
+
+2021-10-22 GDB Administrator <gdbadmin@sourceware.org>
+
+ Automatic date update in version.in
+
+2021-10-21 Simon Marchi <simon.marchi@efficios.com>
+
+ gdb, gdbserver: make target_waitstatus safe
+ I stumbled on a bug caused by the fact that a code path read
+ target_waitstatus::value::sig (expecting it to contain a gdb_signal
+ value) while target_waitstatus::kind was TARGET_WAITKIND_FORKED. This
+ meant that the active union field was in fact
+ target_waitstatus::value::related_pid, and contained a ptid. The read
+ signal value was therefore garbage, and that caused GDB to crash soon
+ after. Or, since that GDB was built with ubsan, this nice error
+ message:
+
+ /home/simark/src/binutils-gdb/gdb/linux-nat.c:1271:12: runtime error: load of value 2686365, which is not a valid value for type 'gdb_signal'
+
+ Despite being a large-ish change, I think it would be nice to make
+ target_waitstatus safe against that kind of bug. As already done
+ elsewhere (e.g. dynamic_prop), validate that the type of value read from
+ the union matches what is supposed to be the active field.
+
+ - Make the kind and value of target_waitstatus private.
+ - Make the kind initialized to TARGET_WAITKIND_IGNORE on
+ target_waitstatus construction. This is what most users appear to do
+ explicitly.
+ - Add setters, one for each kind. Each setter takes as a parameter the
+ data associated to that kind, if any. This makes it impossible to
+ forget to attach the associated data.
+ - Add getters, one for each associated data type. Each getter
+ validates that the data type fetched by the user matches the wait
+ status kind.
+ - Change "integer" to "exit_status", "related_pid" to "child_ptid",
+ just because that's more precise terminology.
+ - Fix all users.
+
+ That last point is semi-mechanical. There are a lot of obvious changes,
+ but some less obvious ones. For example, it's not possible to set the
+ kind at some point and the associated data later, as some users did.
+ But in any case, the intent of the code should not change in this patch.
+
+ This was tested on x86-64 Linux (unix, native-gdbserver and
+ native-extended-gdbserver boards). It was built-tested on x86-64
+ FreeBSD, NetBSD, MinGW and macOS. The rest of the changes to native
+ files was done as a best effort. If I forgot any place to update in
+ these files, it should be easy to fix (unless the change happens to
+ reveal an actual bug).
+
+ Change-Id: I0ae967df1ff6e28de78abbe3ac9b4b2ff4ad03b7
+
+2021-10-21 Simon Marchi <simon.marchi@polymtl.ca>
+
+ gdbserver: initialize the members of lwp_info in-class
+ Add a constructor to initialize the waitstatus members. Initialize the
+ others in the class directly.
+
+ Change-Id: I10f885eb33adfae86e3c97b1e135335b540d7442
+
+2021-10-21 Simon Marchi <simon.marchi@polymtl.ca>
+
+ gdbserver: make thread_info non-POD
+ Add a constructor and a destructor. The constructor takes care of the
+ initialization that happened in add_thread, while the destructor takes
+ care of the freeing that happened in free_one_thread. This is needed to
+ make target_waitstatus non-POD, as thread_info contains a member of that
+ type.
+
+ Change-Id: I1db321b4de9dd233ede0d5c101950f1d6f1d13b7
+
+2021-10-21 Andrew Pinski <apinski@marvell.com>
+
+ Fix ARMv8.4 for hw watchpoint and breakpoint
+ Just like my previoius patch for ARMv8.1 and v8.2 (49ecef2a7da2ee9df4),
+ this adds ARMv8.4 debug arch as being compatible for hw watchpoint
+ and breakpoints.
+
+ Refactor code slightly in nat/aarch64-linux-hw-point.c (aarch64_linux_get_debug_reg_capacity)
+ Since the two locations which check the debug arch are the same code currently, it is
+ a good idea to factor it out to a new function and just use that function from
+ aarch64_linux_get_debug_reg_capacity. This is also the first step to support
+ ARMv8.4 debug arch.
+
+2021-10-21 Carl Love <cel@us.ibm.com>
+
+ Fixes for gdb.mi/mi-break.exp
+ Update the expected pattern for two of the tests.
+
+ Matching pattern \" doesn't work. Use .* to match the \* pattern.
+
+2021-10-21 Tom de Vries <tdevries@suse.de>
+
+ [gdb/tui] Fix breakpoint display functionality
+ In commit 81e6b8eb208 "Make tui-winsource not use breakpoint_chain", a loop
+ body was transformed into a lambda function body:
+ ...
+ - for (bp = breakpoint_chain;
+ - bp != NULL;
+ - bp = bp->next)
+ + iterate_over_breakpoints ([&] (breakpoint *bp) -> bool
+ ...
+ and consequently:
+ - a continue was replaced by a return, and
+ - a final return was added.
+
+ Then in commit 240edef62f0 "gdb: remove iterate_over_breakpoints function", we
+ transformed back to a loop body:
+ ...
+ - iterate_over_breakpoints ([&] (breakpoint *bp) -> bool
+ + for (breakpoint *bp : all_breakpoints ())
+ ...
+ but without reverting the changes that introduced the two returns.
+
+ Consequently, breakpoints no longer show up in the tui source window.
+
+ Fix this by reverting the changes that introduced the two returns.
+
+ Build on x86_64-linux, tested with all .exp test-cases that contain
+ tuiterm_env.
+
+ Bug: https://sourceware.org/bugzilla/show_bug.cgi?id=28483
+
+2021-10-21 Carl Love <cel@us.ibm.com>
+
+ Fix test step-and-next-inline.cc
+ The test expect the runto_main to stop at the first line of the function.
+ Depending on the optimization level, gdb may stop in the prolog or after
+ the prolog at the first line. To ensure the test stops at the first line
+ of main, have it explicitly stop at a break point on the first line of the
+ function.
+
+ On PowerPC, the test passes when compiled with no optimization but fails
+ with all levels of optimization due to gdb stopping in the prolog.
+
+2021-10-21 Tom Tromey <tromey@adacore.com>
+
+ Fix latent Ada bug when accessing field offsets
+ The "add accessors for field (and call site) location" patch caused a
+ gdb crash when running the internal AdaCore testsuite. This turned
+ out to be a latent bug in ada-lang.c.
+
+ The immediate cause of the bug is that find_struct_field
+ unconditionally uses TYPE_FIELD_BITPOS. This causes an assert for a
+ dynamic type.
+
+ This patch fixes the problem by doing two things. First, it changes
+ find_struct_field to use a dummy value for the field offset in the
+ situation where the offset is not actually needed by the caller. This
+ works because the offset isn't used in any other way -- only as a
+ result.
+
+ Second, this patch assures that calls to find_struct_field use a
+ resolved type when the offset is needed. For
+ value_tag_from_contents_and_address, this is done by resolving the
+ type explicitly. In ada_value_struct_elt, this is done by passing
+ nullptr for the out parameters when they are not needed (the second
+ call in this function already uses a resolved type).
+
+ Note that, while we believe the parent field probably can't occur at a
+ variable offset, the patch still updates this code path, just in case.
+
+ I've updated an existing test case to reproduce the crash.
+ I'm checking this in.
+
+2021-10-21 Alan Modra <amodra@gmail.com>
+
+ -Waddress warning in ldelf.c
+ ldelf.c: In function 'ldelf_after_open':
+ ldelf.c:1049:43: warning: the comparison will always evaluate as 'true' for the address of 'elf_header' will never be NULL [-Waddress]
+ 1049 | && elf_tdata (abfd)->elf_header != NULL
+ | ^~
+ In file included from ldelf.c:37:
+ ../bfd/elf-bfd.h:1957:21: note: 'elf_header' declared here
+ 1957 | Elf_Internal_Ehdr elf_header[1]; /* Actual data, but ref like ptr */
+
+ * ldelf.c (ldelf_after_open): Remove useless elf_header test.
+
+2021-10-21 Alan Modra <amodra@gmail.com>
+
+ Avoid -Waddress warnings in readelf
+ Mainline gcc:
+ readelf.c: In function 'find_section':
+ readelf.c:349:8: error: the comparison will always evaluate as 'true' for the pointer operand in 'filedata->section_headers + (sizetype)((long unsigned int)i * 80)' must not be NULL [-Werror=address]
+ 349 | ((X) != NULL \
+ | ^~
+ readelf.c:761:9: note: in expansion of macro 'SECTION_NAME_VALID'
+ 761 | if (SECTION_NAME_VALID (filedata->section_headers + i)
+ | ^~~~~~~~~~~~~~~~~~
+
+ This will likely be fixed in gcc, but inline functions are nicer than
+ macros.
+
+ * readelf.c (SECTION_NAME, SECTION_NAME_VALID),
+ (SECTION_NAME_PRINT, VALID_SYMBOL_NAME, VALID_DYNAMIC_NAME),
+ (GET_DYNAMIC_NAME): Delete. Replace with..
+ (section_name, section_name_valid, section_name_print),
+ (valid_symbol_name, valid_dynamic_name, get_dynamic_name): ..these
+ new inline functions. Update use throughout file.
+
+2021-10-21 GDB Administrator <gdbadmin@sourceware.org>
+
+ Automatic date update in version.in
+
+2021-10-20 Alan Modra <amodra@gmail.com>
+
+ PR28417, std::string no longer allows accepting nullptr_t
+ PR 28417
+ * incremental.cc (Sized_relobj_incr::do_section_name): Avoid
+ std:string undefined behaviour.
+ * options.h (Search_directory::Search_directory): Likewise.
+
+2021-10-20 Alan Modra <amodra@gmail.com>
+
+ Re: PR27625, powerpc64 gold __tls_get_addr calls
+ My previous PR27625 patch had a problem or two. For one, the error
+ "__tls_get_addr call lacks marker reloc" on processing some calls
+ before hitting a call without markers typically isn't seen. Instead a
+ gold assertion fails. Either way it would be a hard error, which
+ triggers on a file contained in libphobos.a when running the gcc
+ testsuite. A warning isn't even appropriate since the call involved
+ is one built by hand without any of the arg setup relocations that
+ might result in linker optimisation.
+
+ So this patch reverts most of commit 0af4fcc25dd5, instead entirely
+ ignoring the problem of mis-optimising old-style __tls_get_addr calls
+ without marker relocs. We can't handle them gracefully without
+ another pass over relocations before decisions are made about GOT
+ entries in Scan::global or Scan::local. That seems too costly, just
+ to link object files from 2009. What's more, there doesn't seem to be
+ any way to allow the libphobos explicit __tls_get_addr call, but not
+ old TLS sequences without marker relocs. Examining instructions
+ before the __tls_get_addr call is out of the question: program flow
+ might reach the call via a branch. Putting an R_PPC64_TLSGD marker
+ with zero sym on the call might be a solution, but current linkers
+ will then merrily optimise away the call!
+
+ PR gold/27625
+ * powerpc.cc (Powerpc_relobj): Delete no_tls_marker_, tls_marker_,
+ and tls_opt_error_ variables and accessors. Remove all uses.
+
+2021-10-20 Tom Tromey <tom@tromey.com>
+
+ Use std::string in print_one_catch_syscall
+ This changes print_one_catch_syscall to use std::string, removing a
+ bit of manual memory management.
+
+ Use unique_xmalloc_ptr in breakpoint
+ This changes struct breakpoint to use unique_xmalloc_ptr in a couple
+ of spots, removing a bit of manual memory management.
+
+ Use unique_xmalloc_ptr in bp_location
+ This changes struct bp_location to use a unique_xmalloc_ptr, removing
+ a bit of manual memory management.
+
+ Use unique_xmalloc_ptr in watchpoint
+ This changes struct watchpoint to use unique_xmalloc_ptr in a couple
+ of places, removing a bit of manual memory management.
+
+ Use unique_xmalloc_ptr in exec_catchpoint
+ This changes struct exec_catchpoint to use a unique_xmalloc_ptr,
+ removing a bit of manual memory management.
+
+ Use unique_xmalloc_ptr in solib_catchpoint
+ This changes struct solib_catchpoint to use a unique_xmalloc_ptr,
+ removing a bit of manual memory management.
+
+2021-10-20 Christian Biesinger <cbiesinger@google.com>
+
+ Make c-exp.y work with Bison 3.8+
+ When using Bison 3.8, we get this error:
+
+ ../../gdb/c-exp.y:3455:1: error: 'void c_print_token(FILE*, int, YYSTYPE)' defined but not used [-Werror=unused-function]
+
+ That's because bison 3.8 removed YYPRINT support:
+ https://savannah.gnu.org/forum/forum.php?forum_id=10047
+
+ Accordingly, this patch only defines that function for Bison < 3.8.
+
+ Change-Id: I3cbf2f317630bb72810b00f2d9b2c4b99fa812ad
+
+2021-10-20 GDB Administrator <gdbadmin@sourceware.org>
+
+ Automatic date update in version.in
+
+2021-10-19 Tom de Vries <tdevries@suse.de>
+
+ [gdb/testsuite] Reimplement gdb.gdb/python-interrupts.exp as unittest
+ The test-case gdb.gdb/python-interrupts.exp:
+ - runs to captured_command_loop
+ - sets a breakpoint at set_active_ext_lang
+ - calls a python command
+ - verifies the command triggers the breakpoint
+ - sends a signal and verifies the result
+
+ The test-case is fragile, because (f.i. with -flto) it cannot be guaranteed
+ that captured_command_loop and set_active_ext_lang are available for setting
+ breakpoints.
+
+ Reimplement the test-case as unittest, using:
+ - execute_command_to_string to capture the output
+ - try/catch to catch the "Error while executing Python code" exception
+ - a new hook selftests::hook_set_active_ext_lang to raise the signal
+
+ Tested on x86_64-linux.
+
+2021-10-19 Tom Tromey <tromey@adacore.com>
+
+ Check index in type::field
+ This changes gdb to check the index that is passed to type::field.
+ This caught one bug in the Ada code when running the test suite
+ (actually I found the bug first, then realized that the check would
+ have helped), so this patch fixes that as well.
+
+ Regression tested on x86-64 Fedora 34.
+
+2021-10-19 Tom Tromey <tromey@adacore.com>
+
+ Fix Rust lex selftest when using libiconv
+ The Rust lex selftest fails on our Windows build. I tracked this down
+ to a use of UTF-32 as a parameter to convert_between_encodings. Here,
+ iconv_open succeeds, but the actual conversion of a tab character
+ fails with EILSEQ. I suspect that "UTF-32" is being interpreted as
+ big-endian, as changing the call to use "UTF-32LE" makes it work.
+ This patch implements this fix.
+
+2021-10-19 Tom Tromey <tromey@adacore.com>
+
+ Fix format_pieces selftest on Windows
+ The format_pieces selftest currently fails on Windows hosts.
+
+ The selftest doesn't handle the "%ll" -> "%I64" rewrite that the
+ formatter may perform, but also gdbsupport was missing a configure
+ check for PRINTF_HAS_LONG_LONG. This patch fixes both issues.
+
+2021-10-19 Tom Tromey <tromey@adacore.com>
+
+ Fix bug in dynamic type resolution
+ A customer-reported problem led us to a bug in dynamic type
+ resolution. resolve_dynamic_struct will recursively call
+ resolve_dynamic_type_internal, passing it the sub-object for the
+ particular field being resolved. While it offsets the address here,
+ it does not also offset the "valaddr" -- the array of bytes describing
+ the memory.
+
+ This patch fixes the bug, by offsetting both. A test case is included
+ that can be used to reproduce the bug.
+
+2021-10-19 Tom Tromey <tromey@adacore.com>
+
+ Always use std::function for self-tests
+ Now that there is a register_test variant that accepts std::function,
+ it seems to me that the 'selftest' struct and accompanying code is
+ obsolete -- simply always using std::function is simpler. This patch
+ implements this idea.
+
+2021-10-19 Daniel Black <daniel@mariadb.org>
+
+ Fix PR gdb/17917 Lookup build-id in remote binaries
+ GDB doesn't support loading debug files using build-id from remote
+ target filesystems.
+
+ This is the case when gdbserver attached to a process and a gdb target
+ remote occurs over tcp.
+
+ With this change we make build-id lookups possible:
+
+ (gdb) show debug-file-directory
+ The directory where separate debug symbols are searched for is "/usr/local/lib/debug".
+ (gdb) set debug-file-directory /usr/lib/debug
+ (gdb) show sysroot
+ The current system root is "target:".
+ (gdb) target extended-remote :46615
+ Remote debugging using :46615
+ warning: Can not parse XML target description; XML support was disabled at compile time
+ Reading /usr/sbin/mariadbd from remote target...
+ warning: File transfers from remote targets can be slow. Use "set sysroot" to access files locally instead.
+ Reading /usr/sbin/mariadbd from remote target...
+ Reading symbols from target:/usr/sbin/mariadbd...
+ Reading /usr/lib/debug/.build-id/6e/0a874dca5a7ff831396ddc0785d939a192efe3.debug from remote target...
+ Reading /usr/lib/debug/.build-id/6e/0a874dca5a7ff831396ddc0785d939a192efe3.debug from remote target...
+ Reading symbols from target:/usr/lib/debug/.build-id/6e/0a874dca5a7ff831396ddc0785d939a192efe3.debug...
+ Reading /lib/x86_64-linux-gnu/libpcre2-8.so.0 from remote target...
+ ...
+
+ Before this change, the lookups would have been (GNU gdb (GDB) Fedora 10.2-3.fc34):
+
+ (gdb) target extended-remote :46615
+ Remote debugging using :46615
+ Reading /usr/sbin/mariadbd from remote target...
+ warning: File transfers from remote targets can be slow. Use "set sysroot" to access files locally instead.
+ Reading /usr/sbin/mariadbd from remote target...
+ Reading symbols from target:/usr/sbin/mariadbd...
+ Reading /usr/sbin/0a874dca5a7ff831396ddc0785d939a192efe3.debug from remote target...
+ Reading /usr/sbin/.debug/0a874dca5a7ff831396ddc0785d939a192efe3.debug from remote target...
+ Reading /usr/lib/debug//usr/sbin/0a874dca5a7ff831396ddc0785d939a192efe3.debug from remote target...
+ Reading /usr/lib/debug/usr/sbin//0a874dca5a7ff831396ddc0785d939a192efe3.debug from remote target...
+ Reading target:/usr/lib/debug/usr/sbin//0a874dca5a7ff831396ddc0785d939a192efe3.debug from remote target...
+ Missing separate debuginfo for target:/usr/sbin/mariadbd
+ Try: dnf --enablerepo='*debug*' install /usr/lib/debug/.build-id/6e/0a874dca5a7ff831396ddc0785d939a192efe3.debug
+ (No debugging symbols found in target:/usr/sbin/mariadbd)
+
+ Observe it didn't look for
+ /usr/lib/debug/.build-id/6e/0a874dca5a7ff831396ddc0785d939a192efe3.debug
+ on the remote target (where it is) and expected them to be installed
+ locally.
+
+ As a minor optimization, this also changes the build-id lookup such that
+ if sysroot is empty, no second lookup of the same location is performed.
+
+ Change-Id: I5181696d271c325a25a0805a8defb8ab7f9b3f55
+ Bug: https://sourceware.org/bugzilla/show_bug.cgi?id=17917
+
+2021-10-19 Nick Clifton <nickc@redhat.com>
+
+ Fix a potential illegal memory access when testing for a special LTO symbol name.
+ bfd * linker.c (_bfd_generic_link_add_one_symbol): Test for a NULL
+ name before checking to see if the symbol is __gnu_lto_slim.
+ * archive.c (_bfd_compute_and_write_armap): Likewise.
+ binutils
+ * nm.c (filter_symbols): Test for a NULL name before checking to
+ see if the symbol is __gnu_lto_slim.
+ * objcopy.c (filter_symbols): Likewise.
+
+2021-10-19 GDB Administrator <gdbadmin@sourceware.org>
+
+ Automatic date update in version.in
+
+2021-10-18 Weimin Pan <weimin.pan@oracle.com>
+
+ CTF: incorrect underlying type setting for enumeration types
+ A bug was filed against the incorrect underlying type setting for
+ an enumeration type, which was caused by a copy and paste error.
+ This patch fixes the problem by setting it by calling objfile_int_type,
+ which was originally dwarf2_per_objfile::int_type, with ctf_type_size bits.
+ Also add error checking on ctf_func_type_info call.
+
+2021-10-18 GDB Administrator <gdbadmin@sourceware.org>
+
+ Automatic date update in version.in
+
+2021-10-17 Alan Modra <amodra@gmail.com>
+
+ PR28459, readelf issues bogus warning
+ I'd missed the fact that the .debug_rnglists dump doesn't exactly
+ display the contents of the section. Instead readelf rummages through
+ .debug_info looking for DW_AT_ranges entries, then displays the
+ entries in .debug_rnglists pointed at, sorted. A simpler dump of the
+ actual section contents might be more useful and robust, but it was
+ likely done that way to detect overlap and holes.
+
+ Anyway, the headers in .debug_rnglists besides the first are ignored,
+ and limiting to the unit length of the first header fails if there is
+ more than one unit.
+
+ PR 28459
+ * dwarf.c (display_debug_ranges): Don't constrain data to length
+ in header.
+
+2021-10-17 GDB Administrator <gdbadmin@sourceware.org>
+
+ Automatic date update in version.in
+
+2021-10-16 H.J. Lu <hjl.tools@gmail.com>
+
+ ld: Adjust pr28158.rd for glibc 2.34
+ Adjust pr28158.rd for glibc 2.34:
+
+ $ readelf -W --dyn-syms tmpdir/pr28158
+
+ Symbol table '.dynsym' contains 4 entries:
+ Num: Value Size Type Bind Vis Ndx Name
+ 0: 0000000000000000 0 NOTYPE LOCAL DEFAULT UND
+ 1: 0000000000000000 0 FUNC GLOBAL DEFAULT UND __libc_start_main@GLIBC_2.34 (2)
+ 2: 0000000000000000 0 NOTYPE WEAK DEFAULT UND __gmon_start__
+ 3: 000000000040401c 4 OBJECT GLOBAL DEFAULT 23 foo@VERS_2.0 (3)
+ $
+
+ vs older glibc:
+
+ $ readelf -W --dyn-syms tmpdir/pr28158
+
+ Symbol table '.dynsym' contains 4 entries:
+ Num: Value Size Type Bind Vis Ndx Name
+ 0: 0000000000000000 0 NOTYPE LOCAL DEFAULT UND
+ 1: 0000000000000000 0 FUNC GLOBAL DEFAULT UND __libc_start_main@GLIBC_2.2.5 (3)
+ 2: 0000000000000000 0 NOTYPE WEAK DEFAULT UND __gmon_start__
+ 3: 000000000040401c 4 OBJECT GLOBAL DEFAULT 23 foo@VERS_2.0 (2)
+
+ $
+
+ * testsuite/ld-elf/pr28158.rd: Adjusted for glibc 2.34.
+
+2021-10-16 GDB Administrator <gdbadmin@sourceware.org>
+
+ Automatic date update in version.in
+
+2021-10-15 GDB Administrator <gdbadmin@sourceware.org>
+
+ Automatic date update in version.in
+
+2021-10-14 Carl Love <cel@us.ibm.com>
+
+ Powerpc: Add support for openat and fstatat syscalls
+ [gdb] update ppc-linux-tdep.c
+
+ Add argument to ppc_canonicalize_syscall for the wordsize.
+ Add syscall entries for the openat and fstatat system calls.
+
+2021-10-14 Tom de Vries <tdevries@suse.de>
+
+ [gdb/testsuite] Add .debug_loc support in dwarf assembler
+ Add .debug_loc support in the dwarf assembler, and use it in new test-case
+ gdb.dwarf2/loc-sec-offset.exp (which is based on
+ gdb.dwarf2/loclists-sec-offset.exp).
+
+ Tested on x86_64-linux.
+
+2021-10-14 Alan Modra <amodra@gmail.com>
+
+ [GOLD] Re: PowerPC64: Don't pretend to support multi-toc
+ We can't get at section->address() until everything is laid out, so
+ trying to generalise the offset calculation rather than using a value
+ of 0x8000 (the old object->toc_base_offset()) was bound to fail.
+ got->g_o_t() is a little better than a hard-coded 0x8000.
+
+ * powerpc.cc (Target_powerpc::Scan::local, global): Don't use
+ toc_pointer() here.
+
+2021-10-14 Alan Modra <amodra@gmail.com>
+
+ [GOLD] Two GOT sections for PowerPC64
+ Split .got into two piece, one with the header and entries for small
+ model got entries, the other with entries for medium/large model got
+ entries. The idea is to better support mixed pcrel/non-pcrel code
+ where non-pcrel small-model .toc entries need to be within 32k of the
+ toc pointer.
+
+ * target.h (Target::tls_offset_for_local): Add got param.
+ (Target::tls_offset_for_global): Likewise.
+ (Target::do_tls_offset_for_local, do_tls_offset_for_global): Likewise.
+ * output.h (Output_data_got::Got_entry::write): Add got param.
+ * output.cc (Output_data_got::Got_entry::write): Likewise, pass to
+ tls_offset_for_local/global calls.
+ (Output_data_got::do_write): Adjust to suit.
+ * s390.cc (Target_s390::do_tls_offset_for_local): Likewise.
+ (Target_s390::do_tls_offset_for_global): Likewise.
+ * powerpc.cc (enum Got_type): Extend with small types, move from
+ class Target_powerpc.
+ (Target_powerpc::biggot_): New.
+ (Traget_powerpc::do_tls_offset_for_local, do_tls_offset_for_global,
+ got_size, got_section, got_base_offset): Handle biggot_.
+ (Target_powerpc::do_define_standard_symbols): Adjust.
+ (Target_powerpc::make_plt_section, do_finalize_sections): Likewise.
+ (Output_data_got_powerpc::Output_data_got_powerpc): Only make
+ 64-bit header for small got section.
+ (Output_data_got_powerpc::g_o_t): Only return a result for small
+ got section.
+ (Output_data_got_powerpc::write): Only write small got section
+ header.
+ (Target_powerpc::Scan::local, global): Select small/big Got_type
+ and section to suit reloc.
+ (Target_powerpc::Relocate::relocate): Similarly.
+ (Sort_toc_sections): Rewrite.
+
+2021-10-14 Alan Modra <amodra@gmail.com>
+
+ [GOLD] PowerPC64: Don't pretend to support multi-toc
+ Code in powerpc.cc is pretending to support a per-object toc pointer
+ value, but powerpc gold has no real support for multi-toc. This patch
+ removes the pretense, tidying quite a lot in preparation for a
+ followup patch. If multi-toc is ever to be supported, don't revert
+ this patch but start by adding object parameter to toc_pointer() and
+ an object to Branch_stub_key.
+
+ * powerpc.cc (Powerpc_relobj::toc_base_offset): Delete.
+ (Target_powerpc::toc_pointer): New function. Use throughout.
+ (Target_powerpc::got_base_offset): New function. Use throughout..
+ (Output_data_got_powerpc::got_base_offset): ..in place of
+ this. Delete.
+ (Output_data_got_powerpc::Output_data_got_powerpc): Init
+ header_index_ to -1u for 64-bit, and make header here.
+ (Output_data_got_powerpc::set_final_data_size, reserve_ent): Don't
+ make 64-bit header here.
+ (Output_data_got_powerpc::g_o_t): Return toc pointer offset in
+ section for 64-bit. Use throughout.
+ (Stub_table): Remove toc_base_off_ from Branch_stub_key, and
+ object param on add_long_branch_entry and find_long_branch_entry.
+ Adjust all uses.
+
+2021-10-14 Alan Modra <amodra@gmail.com>
+
+ Re: s12z/disassembler: call memory_error_func when appropriate
+ Adjust for commit ba7c18a48457.
+
+ * testsuite/gas/s12z/truncated.d: Update expected output.
+
+2021-10-14 GDB Administrator <gdbadmin@sourceware.org>
+
+ Automatic date update in version.in
+
+2021-10-13 Tom de Vries <tdevries@suse.de>
+
+ [gdb/exp] Improve <error reading variable> message
+ When printing a variable x in a subroutine foo:
+ ...
+ subroutine foo (x)
+ integer(4) :: x (*)
+ x(3) = 1
+ end subroutine foo
+ ...
+ where x is an array with unknown bounds, we get:
+ ...
+ $ gdb -q -batch outputs/gdb.fortran/array-no-bounds/array-no-bounds \
+ -ex "break foo" \
+ -ex run \
+ -ex "print x"
+ Breakpoint 1 at 0x4005cf: file array-no-bounds.f90, line 18.
+
+ Breakpoint 1, foo (x=...) at array-no-bounds.f90:18
+ 18 x(3) = 1
+ $1 = <error reading variable>
+ ...
+
+ Improve the error message by printing the details of the error, such that we
+ have instead:
+ ...
+ $1 = <error reading variable: failed to get range bounds>
+ ...
+
+ This is a change in gdb/valprint.c, and grepping through the sources reveals
+ that this is a common pattern.
+
+ Tested on x86_64-linux.
+
+2021-10-13 Carl Love <cel@us.ibm.com>
+
+ PPC fix for stfiwx instruction (and additional stores with primary opcode of 31)
+ [gdb] Fix address being recorded in rs6000-tdep.c, ppc_process_record_op31.
+
+ The GDB record function was recording the variable addr that was passed in
+ rather than the calculated effective address (ea) by the
+ ppc_process_record_op31 function.
+
+2021-10-13 Andrew Burgess <andrew.burgess@embecosm.com>
+
+ gdb: improve error reporting from the disassembler
+ If the libopcodes disassembler returns a negative value then this
+ indicates that the disassembly failed for some reason. In disas.c, in
+ the function gdb_disassembler::print_insn we can see how this is
+ handled; when we get a negative value back, we call the memory_error
+ function, which throws an exception.
+
+ The problem here is that the address used in the memory_error call is
+ gdb_disassembler::m_err_memaddr, which is set in
+ gdb_disassembler::dis_asm_memory_error, which is called from within
+ the libopcodes disassembler through the
+ disassembler_info::memory_error_func callback.
+
+ However, for this to work correctly, every time the libopcodes
+ disassembler returns a negative value, the libopcodes disassembler
+ must have first called the memory_error_func callback.
+
+ My first plan was to make m_err_memaddr a gdb::optional, and assert
+ that it always had a value prior to calling memory_error, however, a
+ quick look in opcodes/*-dis.c shows that there _are_ cases where a
+ negative value is returned without first calling the memory_error_func
+ callback, for example in arc-dis.c and cris-dis.c.
+
+ Now, I think that a good argument can be made that these disassemblers
+ must therefore be broken, except for the case where we can't read
+ memory, we should always be able to disassemble the memory contents to
+ _something_, even if it's just '.word 0x....'. However, I certainly
+ don't plan to go and fix all of the disassemblers.
+
+ What I do propose to do then, is make m_err_memaddr a gdb::optional,
+ but now, instead of always calling memory_error, I add a new path
+ which just calls error complaining about an unknown error. This new
+ path is only used if m_err_memaddr doesn't have a value (indicating
+ that the memory_error_func callback was not called).
+
+ To test this I just augmented one of the disassemblers to always
+ return -1, before this patch I see this:
+
+ Dump of assembler code for function main:
+ 0x000101aa <+0>: Cannot access memory at address 0x0
+
+ And after this commit I now see:
+
+ Dump of assembler code for function main:
+ 0x000101aa <+0>: unknown disassembler error (error = -1)
+
+ This doesn't really help much, but that's because there's no way to
+ report non memory errors out of the disasembler, because, it was not
+ expected that the disassembler would ever report non memory errors.
+
+2021-10-13 Tom de Vries <tdevries@suse.de>
+
+ [gdb/testsuite] Fix gdb.fortran/call-no-debug.exp with native-gdbserver
+ When running test-case gdb.fortran/call-no-debug.exp with target board
+ native-gdbserver, I run into:
+ ...
+ (gdb) PASS: gdb.fortran/call-no-debug.exp: print string_func_ (&'abcdefg', 3)
+ call (integer) string_func_ (&'abcdefg', 3)^M
+ $2 = 0^M
+ (gdb) FAIL: gdb.fortran/call-no-debug.exp: call (integer) string_func_ (&'abcdefg', 3)
+ ...
+
+ The problem is that gdb_test is used to match inferior output.
+
+ Fix this by using gdb_test_stdio.
+
+ Tested on x86_64-linux.
+
+2021-10-13 Tom de Vries <tdevries@suse.de>
+
+ [gdb/testsuite] Require use_gdb_stub == 0 where appropriate
+ When running with target board native-gdbserver, we run into a number of FAILs
+ due to use of the start command (and similar), which is not supported when
+ use_gdb_stub == 1.
+
+ Fix this by:
+ - requiring use_gdb_stub == 0 for the entire test-case, or
+ - guarding some tests in the test-case with use_gdb_stub == 0.
+
+ Tested on x86_64-linux.
+
+2021-10-13 Tom de Vries <tdevries@suse.de>
+
+ [gdb/testsuite] Fix test name in gdb.python/python.exp
+ When running test-case gdb.python/python.exp, we have:
+ ...
+ PASS: gdb.python/python.exp: starti via gdb.execute, not from tty
+ PASS: gdb.python/python.exp: starti via interactive input
+ ...
+
+ The two tests are instances of the same test, with different values for
+ starti command argument from_tty, so it's strange that the test names are so
+ different.
+
+ This is due to using a gdb_test nested in a gdb_test_multiple, with the inner
+ one using a different test name than the outer one. [ That could still make
+ sense if both produced passes, but that's not the case here. ]
+
+ Fix this by using $gdb_test_name, such that we have:
+ ...
+ PASS: gdb.python/python.exp: starti via gdb.execute, not from tty
+ PASS: gdb.python/python.exp: starti via gdb.execute, from tty
+ ...
+
+ Also make this more readable by using variables.
+
+ Tested on x86_64-linux.
+
+2021-10-13 Tom de Vries <tdevries@suse.de>
+
+ [gdb/testsuite] Fix gdb.base/batch-exit-status.exp with native-gdbserver
+ When running test-case gdb.base/batch-exit-status.exp with target board
+ native-gdbserver, I run into (added missing double quotes for clarity):
+ ...
+ builtin_spawn $build/gdb/testsuite/../../gdb/gdb -nw -nx \
+ -data-directory $build/gdb/testsuite/../data-directory \
+ -iex "set height 0" -iex "set width 0" \
+ -ex "set auto-connect-native-target off" \
+ -iex "set sysroot" -batch ""^M
+ : No such file or directory.^M
+ PASS: gdb.base/batch-exit-status.exp: 1x: \
+ No such file or directory: [lindex $result 2] == 0
+ FAIL: gdb.base/batch-exit-status.exp: 1x: \
+ No such file or directory: [lindex $result 3] == $expect_status
+ ...
+
+ As in commit a02a90c114c "[gdb/testsuite] Set sysroot earlier in
+ local-board.exp", the problem is the use of -ex for
+ "set auto-connect-native-target off", which makes that the last command to
+ be executed, and consequently determines the return status.
+
+ Fix this by using -iex instead.
+
+ Tested on x86_64-linux.
+
+2021-10-13 Tom de Vries <tdevries@suse.de>
+
+ [gdb/testsuite] Remove quit in gdb.arch/i386-mpx.exp
+ When running test-case gdb.arch/i386-mpx.exp with target board
+ native-gdbserver, I run into:
+ ...
+ (gdb) PASS: gdb.arch/i386-mpx.exp: verify size for bnd0
+ Remote debugging from host ::1, port 42328^M
+ quit^M
+ A debugging session is active.^M
+ ^M
+ Inferior 1 [process 19679] will be killed.^M
+ ^M
+ Quit anyway? (y or n) monitor exit^M
+ Please answer y or n.^M
+ A debugging session is active.^M
+ ^M
+ Inferior 1 [process 19679] will be killed.^M
+ ^M
+ Quit anyway? (y or n) WARNING: Timed out waiting for EOF in server after monitor exit
+ ...
+
+ The problem is that the test-case sends a quit at the end (without verifying
+ the result of this in any way):
+ ...
+ send_gdb "quit\n"
+ ...
+
+ Fix this by removing the quit.
+
+ Tested on x86_64-linux.
+
+2021-10-13 GDB Administrator <gdbadmin@sourceware.org>
+
+ Automatic date update in version.in
+
+2021-10-12 GDB Administrator <gdbadmin@sourceware.org>
+
+ Automatic date update in version.in
+
+2021-10-11 Srinath Parvathaneni <srinath.parvathaneni@arm.com>
+
+ [ARM] Add support for M-profile MVE extension
+ This patch adds support for the M-profile MVE extension, which includes the
+ following:
+
+ - New M-profile XML feature m-profile-mve
+ - MVE vector predication status and control register (VPR)
+ - p0 pseudo register (contained in the VPR)
+ - q0 ~ q7 pseudo vector registers
+ - New feature bits
+ - Documentation update
+
+ Pseudo register p0 is the least significant bits of vpr and can be accessed
+ as $p0 or displayed through $vpr. For more information about the register
+ layout, please refer to [1].
+
+ The q0 ~ q7 registers map back to the d0 ~ d15 registers, two d registers
+ per q register.
+
+ The register dump looks like this:
+
+ (gdb) info reg all
+ r0 0x0 0
+ r1 0x0 0
+ r2 0x0 0
+ r3 0x0 0
+ r4 0x0 0
+ r5 0x0 0
+ r6 0x0 0
+ r7 0x0 0
+ r8 0x0 0
+ r9 0x0 0
+ r10 0x0 0
+ r11 0x0 0
+ r12 0x0 0
+ sp 0x0 0x0 <__Vectors>
+ lr 0xffffffff -1
+ pc 0xd0c 0xd0c <Reset_Handler>
+ xpsr 0x1000000 16777216
+ d0 0 (raw 0x0000000000000000)
+ d1 0 (raw 0x0000000000000000)
+ d2 0 (raw 0x0000000000000000)
+ d3 0 (raw 0x0000000000000000)
+ d4 0 (raw 0x0000000000000000)
+ d5 0 (raw 0x0000000000000000)
+ d6 0 (raw 0x0000000000000000)
+ d7 0 (raw 0x0000000000000000)
+ d8 0 (raw 0x0000000000000000)
+ d9 0 (raw 0x0000000000000000)
+ d10 0 (raw 0x0000000000000000)
+ d11 0 (raw 0x0000000000000000)
+ d12 0 (raw 0x0000000000000000)
+ d13 0 (raw 0x0000000000000000)
+ d14 0 (raw 0x0000000000000000)
+ d15 0 (raw 0x0000000000000000)
+ fpscr 0x0 0
+ vpr 0x0 [ P0=0 MASK01=0 MASK23=0 ]
+ s0 0 (raw 0x00000000)
+ s1 0 (raw 0x00000000)
+ s2 0 (raw 0x00000000)
+ s3 0 (raw 0x00000000)
+ s4 0 (raw 0x00000000)
+ s5 0 (raw 0x00000000)
+ s6 0 (raw 0x00000000)
+ s7 0 (raw 0x00000000)
+ s8 0 (raw 0x00000000)
+ s9 0 (raw 0x00000000)
+ s10 0 (raw 0x00000000)
+ s11 0 (raw 0x00000000)
+ s12 0 (raw 0x00000000)
+ s13 0 (raw 0x00000000)
+ s14 0 (raw 0x00000000)
+ s15 0 (raw 0x00000000)
+ s16 0 (raw 0x00000000)
+ s17 0 (raw 0x00000000)
+ s18 0 (raw 0x00000000)
+ s19 0 (raw 0x00000000)
+ s20 0 (raw 0x00000000)
+ s21 0 (raw 0x00000000)
+ s22 0 (raw 0x00000000)
+ s23 0 (raw 0x00000000)
+ s24 0 (raw 0x00000000)
+ s25 0 (raw 0x00000000)
+ s26 0 (raw 0x00000000)
+ s27 0 (raw 0x00000000)
+ s28 0 (raw 0x00000000)
+ s29 0 (raw 0x00000000)
+ s30 0 (raw 0x00000000)
+ s31 0 (raw 0x00000000)
+ q0 {u8 = {0x0 <repeats 16 times>}, u16 = {0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0}, u32 = {0x0, 0x0, 0x0, 0x0}, u64 = {0x0, 0x0}, f32 = {0x0, 0x0, 0x0, 0x0}, f64 = {0x0, 0x0}}
+ q1 {u8 = {0x0 <repeats 16 times>}, u16 = {0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0}, u32 = {0x0, 0x0, 0x0, 0x0}, u64 = {0x0, 0x0}, f32 = {0x0, 0x0, 0x0, 0x0}, f64 = {0x0, 0x0}}
+ q2 {u8 = {0x0 <repeats 16 times>}, u16 = {0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0}, u32 = {0x0, 0x0, 0x0, 0x0}, u64 = {0x0, 0x0}, f32 = {0x0, 0x0, 0x0, 0x0}, f64 = {0x0, 0x0}}
+ q3 {u8 = {0x0 <repeats 16 times>}, u16 = {0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0}, u32 = {0x0, 0x0, 0x0, 0x0}, u64 = {0x0, 0x0}, f32 = {0x0, 0x0, 0x0, 0x0}, f64 = {0x0, 0x0}}
+ q4 {u8 = {0x0 <repeats 16 times>}, u16 = {0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0}, u32 = {0x0, 0x0, 0x0, 0x0}, u64 = {0x0, 0x0}, f32 = {0x0, 0x0, 0x0, 0x0}, f64 = {0x0, 0x0}}
+ q5 {u8 = {0x0 <repeats 16 times>}, u16 = {0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0}, u32 = {0x0, 0x0, 0x0, 0x0}, u64 = {0x0, 0x0}, f32 = {0x0, 0x0, 0x0, 0x0}, f64 = {0x0, 0x0}}
+ q6 {u8 = {0x0 <repeats 16 times>}, u16 = {0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0}, u32 = {0x0, 0x0, 0x0, 0x0}, u64 = {0x0, 0x0}, f32 = {0x0, 0x0, 0x0, 0x0}, f64 = {0x0, 0x0}}
+ q7 {u8 = {0x0 <repeats 16 times>}, u16 = {0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0}, u32 = {0x0, 0x0, 0x0, 0x0}, u64 = {0x0, 0x0}, f32 = {0x0, 0x0, 0x0, 0x0}, f64 = {0x0, 0x0}}
+ p0 0x0 0
+
+ Built and regtested with a simulator.
+
+ [1] https://developer.arm.com/documentation/ddi0553/bn
+
+ Co-Authored-By: Luis Machado <luis.machado@linaro.org>
+
+2021-10-11 Luis Machado <luis.machado@linaro.org>
+
+ [ARM] Refactor pseudo register numbering
+ The pseudo register handling for ARM uses some hardcoded constants to
+ determine types and names. In preparation to the upcoming MVE support
+ patch (that will add another pseudo register), this patch refactors and
+ reorganizes things in order to simplify handling of future pseudo registers.
+
+ We keep track of the first pseudo register number in a group and the number of
+ pseudo registers in that group.
+
+ Right now we only have the S and Q pseudo registers.
+
+2021-10-11 Luis Machado <luis.machado@linaro.org>
+
+ [ARM] Small refactoring of arm gdbarch initialization
+ This is in preparation to MVE support, where we will define another
+ pseudo register. We need to define the pseudo register numbers *after*
+ accounting for all the registers in the XML description, so move
+ the call to tdesc_use_registers up.
+
+ If we don't do it, GDB's register count won't consider registers contained
+ in the XML but ignored by GDB, throwing the register numbering off.
+
+2021-10-11 Luis Machado <luis.machado@linaro.org>
+
+ [ARM] Refactor some constants
+ In preparation for the MVE extension patch, this one refactors some of
+ the register-related constants we have for ARM.
+
+ Basically I'm separating counting constants from numbering constants.
+
+ For example, ARM_A1_REGNUM is a numbering constant, whereas ARM_NUM_ARG_REGS
+ is a counting constant.
+
+2021-10-11 Tom de Vries <tdevries@suse.de>
+
+ [gdb/testsuite] Fix FAIL in gdb.mi/mi-var-child-f.exp
+ When running test-case gdb.mi/mi-var-child-f.exp on openSUSE Tumbleweed
+ (with glibc 2.34) I run into:
+ ...
+ (gdb) ^M
+ PASS: gdb.mi/mi-var-child-f.exp: mi runto prog_array
+ Expecting: ^(-var-create array \* array[^M
+ ]+)?(\^done,name="array",numchild="[0-9]+",value=".*",type=.*,has_more="0"[^M
+ ]+[(]gdb[)] ^M
+ [ ]*)
+ -var-create array * array^M
+ &"Attempt to use a type name as an expression.\n"^M
+ ^error,msg="-var-create: unable to create variable object"^M
+ (gdb) ^M
+ FAIL: gdb.mi/mi-var-child-f.exp: create local variable array (unexpected output)
+ ...
+
+ The problem is that the name array is used both:
+ - as the name for a local variable
+ - as the name of a type in glibc, in file malloc/dynarray-skeleton.c, as included
+ by nss/nss_files/files-hosts.c.
+
+ Fix this by ignoring the shared lib symbols.
+
+ Likewise in a couple of other fortran tests.
+
+ Tested on x86_64-linux.
+
+2021-10-11 Andrew Burgess <andrew.burgess@embecosm.com>
+
+ z80/disassembler: call memory_error_func when appropriate
+ If a call to the read_memory_func fails then we should call the
+ memory_error_func to notify the user of the disassembler of the
+ address that was a problem.
+
+ Without this GDB will report all memory errors as being at address
+ 0x0.
+
+ opcodes/ChangeLog:
+
+ * z80-dis.c (fetch_data): Call memory_error_func if the
+ read_memory_func call fails.
+
+2021-10-11 Andrew Burgess <andrew.burgess@embecosm.com>
+
+ s12z/disassembler: call memory_error_func when appropriate
+ If a call to the read_memory_func fails then we should call the
+ memory_error_func to notify the user of the disassembler of the
+ address that was a problem.
+
+ Without this GDB will report all memory errors as being at address
+ 0x0.
+
+ opcodes/ChangeLog:
+
+ * s12z-disc.c (abstract_read_memory): Call memory_error_func if
+ the read_memory_func call fails.
+
+2021-10-11 Tom de Vries <tdevries@suse.de>
+
+ [gdb/testsuite] Fix double debug info in gdb.dwarf2/dw2-ref-missing-frame.exp
+ A mistake slipped in in commit a5ea23036d8 "[gdb/testsuite] Use function_range
+ in gdb.dwarf2/dw2-ref-missing-frame.exp".
+
+ Before the commit the main file was compiled with debug info, and the two
+ others not:
+ ...
+ if {[prepare_for_testing_full "failed to prepare" \
+ [list $testfile {} $srcfile {} $srcfuncfile {} \
+ $srcmainfile debug]]} {
+ ...
+
+ After the commit, all were compiled with debug info, and consequently, there
+ are two versions of debug info for $srcfuncfile. This shows up as a FAIL when
+ running the test-case with target boards readnow and cc-with-debug-names.
+
+ Fix this by using prepare_for_testing_full, as before.
+
+ Tested on x86_64-linux.
+
+ Fixes: a5ea23036d8 ("[gdb/testsuite] Use function_range in
+ gdb.dwarf2/dw2-ref-missing-frame.exp")
+
+2021-10-11 Tom de Vries <tdevries@suse.de>
+
+ [gdb/testsuite] Use require for ensure_gdb_index
+ Replace:
+ ...
+ if { [ensure_gdb_index $binfile] == -1 } {
+ return -1
+ }
+ ...
+ with:
+ ...
+ require {ensure_gdb_index $binfile} != -1
+ ...
+ and consequently, add a missing UNTESTED message.
+
+ Tested on x86_64-linux, both with native and target board readnow.
+
+2021-10-11 Tom de Vries <tdevries@suse.de>
+
+ [gdb/testsuite] Handle readnow in ensure_gdb_index
+ When running test-case gdb.base/with-mf.exp with target board readnow, I run
+ into:
+ ...
+ FAIL: gdb.base/with-mf.exp: check if index present
+ ...
+ This is since commit 6010fb0c49e "[gdb/testsuite] Fix full buffer in
+ gdb.rust/dwindex.exp".
+
+ Before that commit, the proc ensure_gdb_index would treat the line:
+ ...
+ .gdb_index: faked for "readnow"^M
+ ...
+ as proof that an index is already present (which is incorrect).
+
+ Now, instead it generates aforementioned FAIL and continues to generate an
+ index.
+
+ Fix this by explicitly handling the readnow case in proc ensure_gdb_index,
+ such that we bail out instead.
+
+ Tested on x86_64-linux.
+
+2021-10-11 Tom de Vries <tdevries@suse.de>
+
+ [gdb/testsuite] Fix gdb.dwarf2/gdb-add-index-symlink.exp
+ The test-case gdb.dwarf2/gdb-add-index-symlink.exp interpretes a failure to
+ add an index as a failure to add an index for a symlink:
+ ...
+ if { [ensure_gdb_index $symlink] == -1 } {
+ fail "Unable to call gdb-add-index with a symlink to a symfile"
+ return -1
+ }
+ ...
+
+ However, it's possible that the gdb-add-index also fails with a regular
+ file. Add a check for that situation.
+
+ Tested on x86_64-linux.
+
+2021-10-11 Tom de Vries <tdevries@suse.de>
+
+ [gdb/testsuite] Add proc require in lib/gdb.exp
+ Add a new proc require in lib/gdb.exp, and use it to shorten:
+ ...
+ if { [gdb_skip_xml_test] } {
+ # Valgrind gdbserver requires gdb with xml support.
+ untested "missing xml support"
+ return 0
+ }
+ ...
+ into:
+ ...
+ require gdb_skip_xml_test 0
+ ...
+
+ Tested on x86_64-linux, both with and without a trigger patch that forces
+ gdb_skip_xml_test to return 1.
+
+2021-10-11 Michael Forney <mforney@mforney.org>
+
+ bfd: Remove use of void pointer arithmetic
+ This is not valid in ISO C. Instead, use a pointer to bfd_byte.
+
+ * peicode.h (pe_bfd_object_p): Remove use of void pointer
+ arithmetic.
+
+2021-10-11 GDB Administrator <gdbadmin@sourceware.org>
+
+ Automatic date update in version.in
+
+2021-10-10 GDB Administrator <gdbadmin@sourceware.org>
+
+ Automatic date update in version.in
+
+2021-10-09 Tom de Vries <tdevries@suse.de>
+
+ [gdb] Make execute_command_to_string return string on throw
+ The pattern for using execute_command_to_string is:
+ ...
+ std::string output;
+ output = execute_fn_to_string (fn, term_out);
+ ...
+
+ This results in a problem when using it in a try/catch:
+ ...
+ try
+ {
+ output = execute_fn_to_string (fn, term_out)
+ }
+ catch (const gdb_exception &e)
+ {
+ /* Use output. */
+ }
+ ...
+
+ If an expection was thrown during execute_fn_to_string, then the output
+ remains unassigned, while it could be worthwhile to known what output was
+ generated by gdb before the expection was thrown.
+
+ Fix this by returning the string using a parameter instead:
+ ...
+ execute_fn_to_string (output, fn, term_out)
+ ...
+
+ Also add a variant without string parameter, to support places where the
+ function is used while ignoring the result:
+ ...
+ execute_fn_to_string (fn, term_out)
+ ...
+
+ Tested on x86_64-linux.
+
+2021-10-09 Tom de Vries <tdevries@suse.de>
+
+ [gdb/testsuite] Add check-readmore
+ Consider the gdb output:
+ ...
+ 27 return SYSCALL_CANCEL (nanosleep, requested_time, remaining);^M
+ (gdb) ^M
+ Thread 2 "run-attach-whil" stopped.^M
+ ...
+
+ When trying to match the gdb prompt using gdb_test which uses '$gdb_prompt $',
+ it may pass or fail.
+
+ This sort of thing needs to be fixed (see commit b0e2f96b56b), but there's
+ currently no way to reliably find this type of FAILs.
+
+ We have check-read1, but that one actually make the test pass reliably.
+
+ We need something like the opposite of check-read1: something that makes
+ expect read a bit slower, or more exhaustively.
+
+ Add a new test target check-readmore that implements this.
+
+ There are two methods of implementing this in read1.c:
+ - the first method waits a bit before doing a read
+ - the second method does a read and then decides whether to
+ return or to wait a bit and do another read, and so on.
+
+ The second method is potentially faster, has less risc of timeout and could
+ potentially detect more problems. The first method has a simpler
+ implementation.
+
+ The second method is enabled by default. The default waiting period is 10
+ miliseconds.
+
+ The first method can be enabled using:
+ ...
+ $ export READMORE_METHOD=1
+ ...
+ and the waiting period can be specified in miliseconds using:
+ ...
+ $ export READMORE_SLEEP=9
+ ...
+
+ Also a log file can be specified using:
+ ...
+ $ export READMORE_LOG=$(pwd -P)/LOG
+ ...
+
+ Tested on x86_64-linux.
+
+ Testing with check-readmore showed these regressions:
+ ...
+ FAIL: gdb.base/bp-cmds-continue-ctrl-c.exp: run: stop with control-c (continue)
+ FAIL: gdb.base/bp-cmds-continue-ctrl-c.exp: attach: stop with control-c (continue)
+ ...
+
+ I have not been able to find a problem in the test-case, and I think it's the
+ nature of both the test-case and readmore that makes it run longer. Make
+ these pass by increasing the alarm timeout from 60 to 120 seconds.
+
+ Bug: https://sourceware.org/bugzilla/show_bug.cgi?id=27957
+
+2021-10-09 Tom de Vries <tdevries@suse.de>
+
+ [gdb/testsuite] Fix fortran module tests with stressed cpu
+ When running these test-cases:
+ - gdb.fortran/info-modules.exp
+ - gdb.fortran/module.exp
+ - gdb.mi/mi-fortran-modules.exp
+ in conjunction with:
+ ...
+ $ stress -c $(($(cat /proc/cpuinfo | grep -c "^processor") + 1))
+ ...
+ I run into timeouts.
+
+ Fix this by using:
+ - "set auto-solib-add off" to avoid symbols of shared libs
+ (which doesn't work for libc, now that libpthread_name_p has been
+ updated to match libc)
+ - "nosharedlibrary" to avoid symbols of libc
+
+ Tested on x86_64-linux.
+
+ Bug: https://sourceware.org/bugzilla/show_bug.cgi?id=28133
+
+2021-10-09 Guillermo E. Martinez <guillermo.e.martinez@oracle.com>
+
+ PR28415, invalid read in xtensa_read_table_entries
+ PR 28415
+ PR 28416
+ * elf32-xtensa.c (xtensa_read_table_entries): Handle error
+ return from retrieve_contents.
+
+2021-10-09 GDB Administrator <gdbadmin@sourceware.org>
+
+ Automatic date update in version.in
+
+2021-10-08 Tom de Vries <tdevries@suse.de>
+
+ [gdb/testsuite] Fix gdb.base/info-types-c++.exp with stressed cpu
+ When running test-case gdb.base/info-types-c++.exp in conjunction with:
+ ...
+ $ stress -c $(($(cat /proc/cpuinfo | grep -c "^processor") + 1))
+ ...
+ we get:
+ ...
+ FAIL: gdb.base/info-types-c++.exp: info types (timeout)
+ ...
+
+ Fix this by setting auto-solib-add to off.
+
+ Tested on x86_64-linux.
+
+2021-10-08 Tom de Vries <tdevries@suse.de>
+
+ [gdb/testsuite] Fix gdb.base/info_sources_2.exp with check-read1
+ When running test-case gdb.base/info_sources_2.exp with check-read1, I run
+ into:
+ ...
+ FAIL: gdb.base/info_sources_2.exp: args: : info sources (timeout)
+ ...
+
+ Fix this by consuming a "$src1, $src2, ..., $srcn: line bit by bit rather than
+ as one whole line.
+
+ Also add the missing handling of "Objfile has no debug information".
+
+ Tested on x86_64-linux.
+
+2021-10-08 Tom de Vries <tdevries@suse.de>
+
+ [gdb/testsuite] Fix gdb.mi/gdb2549.exp with check-read1
+ When running test-case gdb.mi/gdb2549.exp with check-read1, I run into:
+ ...
+ FAIL: gdb.mi/gdb2549.exp: register values x (timeout)
+ ...
+
+ Fix this by applying the same fix as for "register values t" in commit
+ 478e490a4df "[gdb/testsuite] Fix gdb.mi/gdb2549.exp with check-read1".
+
+ Tested on x86_64-linux.
+
+2021-10-08 Tom de Vries <tdevries@suse.de>
+
+ [gdb/testsuite] Fix gdb.base/bt-on-error-and-warning.exp with check-read1
+ When running test-case gdb.base/bt-on-error-and-warning.exp with check-read1,
+ I run into:
+ ...
+ (gdb) maint internal-error foobar^M
+ src/gdb/maint.c:82: internal-error: foobar^M
+ A problem internal to GDB has been detectedFAIL: \
+ gdb.base/bt-on-error-and-warning.exp: problem=internal-error, mode=on: \
+ scan for backtrace (GDB internal error)
+ Resyncing due to internal error.
+ ,^M
+ ...
+
+ The corresponding gdb_test_multiple in the test-case contains:
+ ...
+ -early -re "^A problem internal to GDB has been detected,\r\n" {
+ incr header_lines
+ exp_continue
+ }
+ ...
+ but instead this one triggers in gdb_test_multiple:
+ ...
+ -re ".*A problem internal to GDB has been detected" {
+ fail "$message (GDB internal error)"
+ gdb_internal_error_resync
+ set result -1
+ }
+ ...
+
+ Fix this by likewise shortening the regexp to before the comma.
+
+ Tested on x86_64-linux.
+
+2021-10-08 Tom de Vries <tdevries@suse.de>
+
+ [gdb/testsuite] Add nopie in two test-cases
+ When running test-case gdb.dwarf2/dw2-restrict.exp on openSUSE Leap 15.2 with
+ gcc-PIE installed (switching compiler default to -fPIE/-pie), I get:
+ ...
+ gdb compile failed, ld: outputs/gdb.dwarf2/dw2-restrict/dw2-restrict0.o: \
+ warning: relocation in read-only section `.text'
+ ld: warning: creating DT_TEXTREL in a PIE
+ UNTESTED: gdb.dwarf2/dw2-restrict.exp: failed to prepare
+ ...
+
+ This is due to using a hardcoded .S file that was generated with -fno-PIE.
+
+ Fix this by adding the missing nopie.
+
+ Likewise in gdb.arch/amd64-tailcall-noret.exp.
+
+ Tested on x86_64-linux.
+
+2021-10-08 GDB Administrator <gdbadmin@sourceware.org>
+
+ Automatic date update in version.in
+
+2021-10-07 Tom de Vries <tdevries@suse.de>
+
+ [gdb/testsuite] Fix gdb.threads/check-libthread-db.exp with glibc 2.34
+ When running test-case gdb.threads/check-libthread-db.exp on openSUSE
+ Tumbleweed (with glibc 2.34) I get:
+ ...
+ (gdb) continue^M
+ Continuing.^M
+ [Thread debugging using libthread_db enabled]^M
+ Using host libthread_db library "/lib64/libthread_db.so.1".^M
+ Stopped due to shared library event:^M
+ Inferior loaded /lib64/libm.so.6^M
+ /lib64/libc.so.6^M
+ (gdb) FAIL: gdb.threads/check-libthread-db.exp: user-initiated check: continue
+ ...
+
+ The check expect the inferior to load libpthread, but since glibc 2.34
+ libpthread has been integrated into glibc, and consequently it's no longer
+ a dependency:
+ ...
+ $ ldd outputs/gdb.threads/check-libthread-db/check-libthread-db
+ linux-vdso.so.1 (0x00007ffe4cae4000)
+ libm.so.6 => /lib64/libm.so.6 (0x00007f167c77c000)
+ libc.so.6 => /lib64/libc.so.6 (0x00007f167c572000)
+ /lib64/ld-linux-x86-64.so.2 (0x00007f167c86e000)
+ ...
+
+ Fix this by updating the regexp to expect libpthread or libc.
+
+ Tested on x86_64-linux.
+
+2021-10-07 Tom de Vries <tdevries@suse.de>
+
+ [gdb/testsuite] Fix gdb.guile/scm-type.exp with gcc 4.8
+ With gcc 7.5.0, I get:
+ ...
+ (gdb) guile (print (type-range (field-type (type-field (value-type \
+ (value-dereference f)) "items"))))^M
+ = (0 0)^M
+ (gdb) PASS: gdb.guile/scm-type.exp: lang_cpp: test_range: \
+ on flexible array member: $cmd
+ ...
+ but with gcc 4.8.5, I get instead:
+ ...
+ (gdb) guile (print (type-range (field-type (type-field (value-type \
+ (value-dereference f)) "items"))))^M
+ = (0 -1)^M
+ (gdb) FAIL: gdb.guile/scm-type.exp: lang_cpp: test_range: \
+ on flexible array member: $cmd
+ ...
+
+ There's a difference in debug info. With gcc 4.8.5, we have:
+ ...
+ <2><224>: Abbrev Number: 15 (DW_TAG_member)
+ <225> DW_AT_name : items
+ <22b> DW_AT_type : <0x231>
+ <1><231>: Abbrev Number: 4 (DW_TAG_array_type)
+ <232> DW_AT_type : <0x105>
+ <2><23a>: Abbrev Number: 16 (DW_TAG_subrange_type)
+ <23b> DW_AT_type : <0x11a>
+ <23f> DW_AT_upper_bound : 0xffffffffffffffff
+ ...
+ and with gcc 7.5.0, we have instead:
+ ...
+ <2><89f>: Abbrev Number: 12 (DW_TAG_member)
+ <8a0> DW_AT_name : items
+ <8a6> DW_AT_type : <0x8ac>
+ <1><8ac>: Abbrev Number: 17 (DW_TAG_array_type)
+ <8ad> DW_AT_type : <0x29d>
+ <2><8b5>: Abbrev Number: 41 (DW_TAG_subrange_type)
+ <2><8b6>: Abbrev Number: 0
+ ...
+
+ As mentioned in commit 858c8f2c1b9 "gdb/testsuite: adjust
+ gdb.python/flexible-array-member.exp expected pattern":
+ ...
+ Ideally, GDB would present a consistent and documented value for an
+ array member declared with size 0, regardless of how the debug info
+ looks like.
+ ...
+
+ As in gdb.python/flexible-array-member.exp, change the test to accept the two
+ values.
+
+ Tested on x86_64-linux.
+
+2021-10-07 Simon Marchi <simon.marchi@polymtl.ca>
+
+ gdb: add accessors for field (and call site) location
+ Add accessors for the various location values in struct field. This
+ lets us assert that when we get a location value of a certain kind (say,
+ bitpos), the field's location indeed contains a value of that kind.
+
+ Remove the SET_FIELD_* macros, instead use the new setters directly.
+ Update the FIELD_* macros used to access field locations to go through
+ the getters. They will be removed in a subsequent patch.
+
+ There are places where the FIELD_* macros are used on call_site_target
+ structures, because it contains members of the same name (loc_kind and
+ loc). For now, I have replicated the getters/setters in
+ call_site_target. But we could perhaps eventually factor them in a
+ "location" structure that can be used at both places.
+
+ Note that the field structure, being zero-initialized, defaults to a
+ bitpos location with value 0. While writing this patch, I tried to make
+ it default to an "unset" location, to catch places where we would miss
+ setting a field's location. However, I found that some places relied on
+ the default being "bitpos 0", so I left it as-is. This change could
+ always be done as follow-up work, making these places explicitly set the
+ "bitpos 0" location.
+
+ I found two issues to fix:
+
+ - I got some failures in the gdb.base/infcall-nested-structs-c++.exp
+ test. They were caused by two functions in amd64-tdep.c using
+ TYPE_FIELD_BITPOS before checking if the location is of the bitpos
+ kind, which they do indirectly through `field_is_static`. Simply
+ move getting the bitpos below the field_is_static call.
+
+ - I got a failure in gdb.xml/tdesc-regs.exp. It turns out that in
+ make_gdb_type_enum, we set enum field values using SET_FIELD_BITPOS,
+ and later access them through FIELD_ENUMVAL. Fix that by using
+ set_loc_enumval to set the value.
+
+ Change-Id: I53d3734916c46457576ba11dd77df4049d2fc1e8
+
+2021-10-07 Philipp Tomsich <philipp.tomsich@vrull.eu>
+
+ RISC-V: Support aliases for Zbs instructions
+ Add aliases for the non-immediate mnemonics of b{set,clr,inv,ext} to
+ yencode the respective immediate insn b{set,clr,inv,ext}i when the
+ second source operand is an immediate.
+
+ 2021-01-11 Philipp Tomsich <philipp.tomsich@vrull.eu>
+
+ gas/
+ * testsuite/gas/riscv/b-ext.d: Add tests.
+ * testsuite/gas/riscv/b-ext.s: Likewise.
+ * testsuite/gas/riscv/b-ext-64.d: Likewise.
+ * testsuite/gas/riscv/b-ext-64.s: Likewise.
+ opcodes/
+ * riscv-opc.c (riscv_opcodes): Add aliases for Zbs.
+
+ Suggested-by: Jan Beulich <jbeulich@suse.com>
+
+2021-10-07 Philipp Tomsich <philipp.tomsich@vrull.eu>
+
+ RISC-V: Add support for Zbs instructions
+ This change adds the Zbs instructions from the Zbs 1.0.0 specification.
+ See
+ https://github.com/riscv/riscv-bitmanip/releases/tag/1.0.0
+ for the frozen specification.
+
+ 2021-01-09 Philipp Tomsich <philipp.tomsich@vrull.eu>
+
+ bfd/
+ * elfxx-riscv.c (riscv_supported_std_z_ext): Added zbs.
+ gas/
+ * config/tc-riscv.c (riscv_multi_subset_supports): Handle INSN_CLASS_ZBS.
+ * testsuite/gas/riscv/b-ext.d: Test Zbs instructions.
+ * testsuite/gas/riscv/b-ext.s: Likewise.
+ * testsuite/gas/riscv/b-ext-64.d: Likewise.
+ * testsuite/gas/riscv/b-ext-64.s: Likewise.
+ include/
+ * opcode/riscv-opc.h: Added MASK/MATCH/DECLARE_INSN for Zbs.
+ * opcode/riscv.h (riscv_insn_class): Added INSN_CLASS_ZBS.
+ opcodes/
+ * riscv-opc.c (riscv_supported_std_z_ext): Add zbs.
+
+2021-10-07 Philipp Tomsich <philipp.tomsich@vrull.eu>
+
+ RISC-V: Update extension version for Zb[abc] to 1.0.0
+ 2021-10-06 Philipp Tomsich <philipp.tomsich@vrull.eu>
+
+ bfd/
+ * elfxx-riscv.c (riscv_supported_std_z_ext): Update the version
+ number for zba, zbb and zbc to 1.0.0
+
+
+ Version-changes: 3
+ - Updated version numbers for zba, zbb and zbc to 1.0.0
+
+2021-10-07 Philipp Tomsich <philipp.tomsich@vrull.eu>
+
+ RISC-V: Split Zb[abc] into commented sections
+ The Zb[abc] opcodes are bundled just below the Privileged opcodes in
+ riscv_opcodes, possibly giving the appearance that they are part of
+ the Privileged spec for an uninitiated reader. This separates them
+ out and adds comments above each section to clearly identify them as
+ Zba, Zbb or Zbc opcodes.
+
+ 2021-10-04 Philipp Tomsich <philipp.tomsich@vrull.eu>
+
+ opcodes/
+ * riscv-opc.c: Split of Zb[abc] instructions and add comments.
+
+2021-10-07 Alan Modra <amodra@gmail.com>
+
+ PR28423, use-after-free in objdump
+ XCOFF archives use a bi-directional linked list for file members. So
+ one member points to both the previous member and the next member.
+ Members may not be sequentially ordered in the file. This of course
+ is over-engineered nonsense and an attractive target for fuzzers.
+ (There is even a free list of members!) The testcase in PR28423 is an
+ XCOFF archive with one member pointing to itself, which results in
+ lots of bad behaviour. For example, "ar t" never terminates.
+
+ The use-after-free with "objdump -r" happens like this: The first
+ archive element is opened, its symbols are read and "canonicalized"
+ for objdump, then relocations are read and printed. Those relocations
+ use the canonicalized symbols, and also happen to be cached by the
+ coff bfd backend support. objdump frees the symbols. The next
+ archive element is then opened. This must be done before the first
+ element is closed, because finding the next element uses data held in
+ the currect element. Unfortunately the next element happens to be the
+ original, so we aren't opening, we're reopening a bfd which has cached
+ data. When the relocations are printed they use the cached copy
+ containing references to the freed canonical symbols.
+
+ This patch adds a little sanity checking to the XCOFF "open next
+ archive file" support, so that it rejects archive members pointing at
+ themselves. That is sufficient to cure this problem. Anything more
+ is overkill. If someone deliberately fuzzes an XCOFF archive with an
+ element loop then reports an "ar" bug when it runs forever, they will
+ find their bug report closed WONTFIX.
+
+ PR 28423
+ * coff-rs6000.c (_bfd_xcoff_read_ar_hdr): Save size occupied
+ by member name in areltdata.extra_size.
+ (_bfd_xcoff_openr_next_archived_file): Sanity check nextoff.
+ * coff64-rs6000.c (xcoff64_openr_next_archived_file): Call
+ _bfd_xcoff_openr_next_archived_file.
+
+2021-10-07 Alan Modra <amodra@gmail.com>
+
+ PR28422, build_id use-after-free
+ This fixes a bug in commit 5d9bbb73c1df. All fields preserved from a
+ bfd in struct bfd_preserve need to be cleared in bfd_reinit.
+
+ PR 28422
+ * format.c (bfd_reinit): Clear build_id.
+
+2021-10-07 Alan Modra <amodra@gmail.com>
+
+ Change ridiculous section size error
+ Rather than reporting "memory exhausted", report "file truncated".
+ You can hit this error on small fuzzed object files, or on files that
+ are actually truncated. In either case sizes can be such that an out
+ of memory error is a little confusing.
+
+ * compress.c (bfd_get_full_section_contents): Set
+ bfd_error_file_truncated rather than bfd_error_no_memory when
+ section size exceeds file size.
+
+2021-10-07 Tom de Vries <tdevries@suse.de>
+
+ [gdb/testsuite] Fix FAIL in gdb.base/annota1.exp
+ On openSUSE tumbleweed I run into:
+ ...
+ FAIL: gdb.base/annota1.exp: run until main breakpoint (timeout)
+ ...
+ due to a message related to libthread_db:
+ ...
+ ^Z^Zstarting^M
+ [Thread debugging using libthread_db enabled]^M
+ Using host libthread_db library "/lib64/libthread_db.so.1".^M
+ ^M
+ ^Z^Zframes-invalid^M
+ ...
+ which is not matched by the regexp.
+
+ Fix this by updating the regexp.
+
+ Tested on x86_64-linux.
+
+2021-10-07 Tom de Vries <tdevries@suse.de>
+
+ [gdb/testsuite] Refactor regexp in gdb.base/annota1.exp
+ Refactor regexp in gdb.base/annota1.exp to reduce indentation and repetition.
+
+ Tested on x86_64-linux.
+
+2021-10-07 GDB Administrator <gdbadmin@sourceware.org>
+
+ Automatic date update in version.in
+
+2021-10-06 Andrew Burgess <andrew.burgess@embecosm.com>
+
+ gdb/doc: improve 'show print elements' description
+ The documentation for 'show print elements' contains the line:
+
+ If the number is 0, then the printing is unlimited.
+
+ However, this line is now out of date as can be seen by this GDB
+ session:
+
+ (gdb) set print elements 0
+ (gdb) show print elements
+ Limit on string chars or array elements to print is unlimited.
+
+ The value 0 does indeed mean unlimited, and this is described in the
+ 'set print elements' section, however, for 'show print elements' the
+ user will never see the value 0, so lets just remove that bit from the
+ docs.
+
+2021-10-06 Tom de Vries <tdevries@suse.de>
+
+ [gdb/testsuite] Fix FAIL in gdb.tui/corefile-run.exp
+ When running test-case gdb.tui/corefile-run.exp on openSUSE Tumbleweed,
+ I run into:
+ ...
+ PASS: gdb.tui/corefile-run.exp: load corefile
+ FAIL: gdb.tui/corefile-run.exp: run until the end
+ ...
+
+ What's going on is easier to see when also doing dump_screen if
+ check_contents passes, and inspecting state at the preceding PASS:
+ ...
+ +-------------------------------------------------------------------------+
+ exec No process In: L?? PC: ??
+ [New LWP 16629]
+ [Thread debugging using libthread_db enabled]
+ Using host libthread_db library "/lib64/libthread_db.so.1".
+ Core was generated by `/data/gdb_versions/devel/build/gdb/testsuite/output
+ s/gdb.tui/corefile-run/corefi'.
+ Program terminated with signal SIGTRAP, Trace/breakpoint trap.
+ #0 main ()
+ --Type <RET> for more, q to quit, c to continue without paging--
+ ...
+
+ The problem is that we're getting a pagination prompt, and the subsequent run
+ command is interpreted as an answer to that prompt.
+
+ Fix this by:
+ - detecting the gdb prompt in response to "load corefile", such that
+ we detect the failure earlier, and
+ - doing a "set pagination off" in Term::clean_restart.
+
+ Tested on x86_64-linux.
+
+2021-10-06 Alan Modra <amodra@gmail.com>
+
+ PR28420, ecoff fuzzing failures
+ PR 28420
+ * coff-mips.c (mips_adjust_reloc_in): Replace abort with error
+ message and return.
+ * ecoff.c (ecoff_slurp_reloc_table): Remove assertion and aborts,
+ instead handle errors gracefully.
+
+2021-10-06 Alan Modra <amodra@gmail.com>
+
+ PR28402, fail to allocate line number array
+ This fixes a situation where the COFF code allocated memory for
+ internal representaion arrays before reading the external file data.
+ That meant the allocation didn't have any sanity check against file
+ size.
+
+ PR 28402
+ * coffcode.h (buy_and_read): Malloc rather than alloc memory.
+ (coff_slurp_line_table): Read native line number info before
+ allocating memory for internal line number array. Adjust error
+ paths to suit. Remove now unnecessary line number count check.
+ (coff_slurp_reloc_table): Adjust to suit buy_and_read change.
+
+2021-10-06 Alan Modra <amodra@gmail.com>
+
+ PR28403, null pointer dereference in disassemble_bytes
+ Indexing of symbol and howto arrays wasn't checked in aout targets.
+
+ PR 28403
+ * aout-ns32k.c (MY (reloc_howto)): Sanity check howto_table index.
+ Make r_index unsigned.
+ (MY_swap_std_reloc_in): Make r_index unsigned.
+ * aoutx.h (MOVE_ADDRESS): Sanity check symbol r_index.
+ (aout_link_input_section_std): Make r_index unsigned.
+ (aout_link_input_section_ext): Likewise.
+ * i386lynx.c (MOVE_ADDRESS): Sanity check symbol r_index.
+ (swap_ext_reloc_in, swap_std_reloc_in): Make r_index unsigned.
+ * pdp11.c (MOVE_ADDRESS): Sanity check symbol r_index.
+
+2021-10-06 Alan Modra <amodra@gmail.com>
+
+ PR28401, invalid section name lookup
+ The PR28401 testcase has a section named "", ie. an empty string.
+ This results in some silly behaviour in load_debug_section, and
+ dump_dwarf_section. Fix that. Note that this patch doesn't correct
+ the main complaint in PR28401, "failed to allocate", since malloc
+ failures on sections having huge bogus sizes are to be expected. We
+ can't safely catch all such cases by comparing with file size, for
+ example, where sections contain compressed data.
+
+ PR 28401
+ * objdump.c (load_debug_section): Don't attempt to retrieve
+ empty name sections.
+ (dump_dwarf_section): Likewise.
+
+2021-10-06 GDB Administrator <gdbadmin@sourceware.org>
+
+ Automatic date update in version.in
+
+2021-10-06 Tom de Vries <tdevries@suse.de>
+
+ [gdb/testsuite] Make tui testing less verbose
+ Currently, tui testing is rather verbose. When using these RUNTESTFLAGS to
+ pick up all tui tests (17 in total):
+ ...
+ rtf=$(echo $(cd src/gdb/testsuite/; find gdb.* -type f -name *.exp* \
+ | xargs grep -l tuiterm_env) )
+ ...
+ we have:
+ ...
+ $ wc -l gdb.log
+ 120592 gdb.log
+ ...
+
+ Most of the output is related to controlling the tui screen, but that does
+ not give a top-level sense of how the test-case progresses.
+
+ Put differently: a lot of bandwith is used to describe how we arrive at a
+ certain tui screen state. But we don't actually always show the state we
+ arrive at, unless there's a FAIL.
+
+ And if there's say, a PASS that should actually be FAILing, it's hard to
+ detect.
+
+ Fix this by:
+ - dropping the -log on the call to verbose in _log. We still can get the
+ same info back using runtest -v.
+ - dumping the screen or box that we're checking, also when the test passes.
+
+ Brings down verbosity to something more reasonable:
+ ...
+ $ wc -l gdb.log
+ 3221 gdb.log
+ ...
+
+ Tested on x86_64-linux.
+
+2021-10-06 Tom de Vries <tdevries@suse.de>
+
+ [gdb/testsuite] Add Term::dump_box in lib/tuiterm.exp
+ Factor out new proc Term::get_region and use it to implement a
+ new proc Term::dump_box, similar to Term::dump_screen.
+
+ Tested on x86_64-linux.
+
+2021-10-05 Lancelot SIX <lsix@lancelotsix.com>
+
+ gdb: Remove deprecated assertion in setting::get
+ The commit 702991711a91bd47b209289562843a11e7009396 (gdb: Have setter
+ and getter callbacks for settings) makes it possible for a setting not
+ to be backed by a memory buffer but use callback functions instead to
+ retrieve or set the setting's value.
+
+ An assertion was not properly updated to take into account that the
+ m_var member (which points to a memory buffer, if used) might be nullptr
+ if the setting uses callback functions. If the setting is backed by a
+ memory buffer, the m_var has to be non nullptr, which is already checked
+ before the pointer is dereferenced.
+
+ This commit removes this assertion as it is not valid anymore.
+
+2021-10-05 Tom Tromey <tromey@adacore.com>
+
+ Remove 'varsize-limit'
+ This makes the Ada-specific "varsize-limit" a synonym for
+ "max-value-size", and removes the Ada-specific checks of the limit.
+
+ I am not certain of the history here, but it seems to me that this
+ code is fully obsolete now. And, removing this makes it possible to
+ index large Ada arrays without triggering an error. A new test case
+ is included to demonstrate this.
+
+2021-10-05 Tom Tromey <tromey@adacore.com>
+
+ Allow lazy 'zero' value
+ This changes value_zero to create a lazy value. In many cases,
+ value_zero is called in expression evaluation to wrap a type in a
+ non-eval context. It seems senseless to allocate a buffer in these
+ cases.
+
+ A new 'is_zero' flag is added so we can preserve the existing
+ assertions in value_fetch_lazy.
+
+ A subsequent patch will add a test where creating a zero value would
+ fail, due to the variable size check. However, the contents of this
+ value are never needed, and so creating a lazy value avoids the error
+ case.
+
+2021-10-05 Tom Tromey <tromey@adacore.com>
+
+ Add lval_funcs::is_optimized_out
+ This adds an is_optimized_out function pointer to lval_funcs, and
+ changes value_optimized_out to call it. This new function lets gdb
+ determine if a value is optimized out without necessarily fetching the
+ value. This is needed for a subsequent patch, where an attempt to
+ access a lazy value would fail due to the value size limit -- however,
+ the access was only needed to determine the optimized-out state.
+
+2021-10-05 Tom de Vries <tdevries@suse.de>
+
+ [gdb/testsuite] Fix FAIL in gdb.mi/mi-nsmoribund.exp
+ Since commit e36788d1354 "[gdb/testsuite] Fix handling of nr_args < 3 in
+ mi_gdb_test" we run into:
+ ...
+ PASS: gdb.mi/mi-nsmoribund.exp: print done = 1
+ Expecting: ^(.*[^M
+ ]+)?([^
+ ]*^M
+ \*running,thread-id="[0-9]+"^M
+ \*running,thread-id="[0-9]+"^M
+ \*running,thread-id="[0-9]+"^M
+ \*running,thread-id="[0-9]+"^M
+ \*running,thread-id="[0-9]+"^M
+ \*running,thread-id="[0-9]+"^M
+ \*running,thread-id="[0-9]+"^M
+ \*running,thread-id="[0-9]+"^M
+ \*running,thread-id="[0-9]+"^M
+ \*running,thread-id="[0-9]+"[^M
+ ]+[(]gdb[)] ^M
+ [ ]*)
+ 103-exec-continue --all^M
+ =library-loaded,id="/lib64/libgcc_s.so.1",target-name="/lib64/libgcc_s.so.1",\
+ host-name="/lib64/libgcc_s.so.1",symbols-loaded="0",thread-group="i1",\
+ ranges=[{from="0x00007ffff22a5010",to="0x00007ffff22b6365"}]^M
+ 103^running^M
+ *running,thread-id="5"^M
+ (gdb) ^M
+ FAIL: gdb.mi/mi-nsmoribund.exp: 103-exec-continue --all (unexpected output)
+ ...
+
+ The regexp expect running messages for all threads, but we only get one for
+ thread 5.
+
+ The test-case uses non-stop mode, and when the exec-continue --all command is
+ issued, thread 5 is stopped and all other threads are running. Consequently,
+ only thread 5 is resumed, and reported as running.
+
+ Fix this by updating the regexp.
+
+ Tested on x86_64-linux.
+
+2021-10-05 Andrew Burgess <andrew.burgess@embecosm.com>
+
+ gdb/python: fix memory leak in python inferior code
+ When a user creates a gdb.Inferior object for the first time a new
+ Python object is created. This object is then cached within GDB's
+ inferior object using the registry mechanism (see
+ inferior_to_inferior_object in py-inferior.c, specifically the calls
+ to inferior_data and set_inferior_data).
+
+ The Python Reference to the gdb.Inferior object held within the real
+ inferior object ensures that the reference count on the Python
+ gdb.Inferior object never reaches zero while the GDB inferior object
+ continues to exist.
+
+ At the same time, the gdb.Inferior object maintains a C++ pointer back
+ to GDB's real inferior object. We therefore end up with a system that
+ looks like this:
+
+ Python Reference
+ |
+ |
+ .----------. | .--------------.
+ | |------------------->| |
+ | inferior | | gdb.Inferior |
+ | |<-------------------| |
+ '----------' | '--------------'
+ |
+ |
+ C++ Pointer
+
+ When GDB's inferior object is deleted (say the inferior exits) then
+ py_free_inferior is called (thanks to the registry system), this
+ function looks up the Python gdb.Inferior object and sets the C++
+ pointer to nullptr and finally reduces the reference count on the
+ Python gdb.Inferior object.
+
+ If at this point the user still holds a reference to the Python
+ gdb.Inferior object then nothing happens. However, the gdb.Inferior
+ object is now in the non-valid state (see infpy_is_valid in
+ py-inferior.c), but otherwise, everything is fine.
+
+ However, if there are no further references to the Python gdb.Inferior
+ object, or, once the user has given up all their references to the
+ gdb.Inferior object, then infpy_dealloc is called.
+
+ This function currently checks to see if the inferior pointer within
+ the gdb.Inferior object is nullptr or not. If the pointer is nullptr
+ then infpy_dealloc immediately returns.
+
+ Only when the inferior point in the gdb.Inferior is not nullptr do
+ we (a) set the gdb.Inferior reference inside GDB's inferior to
+ nullptr, and (b) call the underlying Python tp_free function.
+
+ There are a number things wrong here:
+
+ 1. The Python gdb.Inferior reference within GDB's inferior object
+ holds a reference count, thus, setting this reference to nullptr
+ without first decrementing the reference count would leak a
+ reference, however...
+
+ 2. As GDB's inferior holds a reference then infpy_dealloc will never
+ be called until GDB's inferior object is deleted. Deleting a GDB
+ inferior ohject calls py_free_inferior, and so gives up the
+ reference. At this point there is no longer a need to call
+ set_inferior_data to set the field back to NULL, that field must
+ have been cleared in order to get the reference count to zero, which
+ means...
+
+ 3. If we know that py_free_inferior must be called before
+ infpy_dealloc, then we know that the inferior pointer in
+ gdb.Inferior will always be nullptr when infpy_dealloc is called,
+ this means that the call to the underlying tp_free function will
+ always be skipped. Skipping this call will cause Python to leak the
+ memory associated with the gdb.Inferior object, which is what we
+ currently always do.
+
+ Given all of the above, I assert that the C++ pointer within
+ gdb.Inferior will always be nullptr when infpy_dealloc is called.
+ That's what this patch does.
+
+ I wrote a test for this issue making use of Pythons tracemalloc
+ module, which allows us to spot this memory leak.
+
+2021-10-05 Bhuvanendra Kumar N <Bhuvanendra.KumarN@amd.com>
+
+ [gdb/testsuite] Use function_range in gdb.dwarf2/dw2-ref-missing-frame.exp
+ Following 2 test points are failing with clang compiler
+
+ (gdb) FAIL: gdb.dwarf2/dw2-ref-missing-frame.exp: func_nofb print
+ (gdb) FAIL: gdb.dwarf2/dw2-ref-missing-frame.exp: func_loopfb print
+
+ As in commit f677852bbda "[gdb/testsuite] Use function_range in
+ gdb.dwarf2/dw2-abs-hi-pc.exp", the problem is that the CU and functions
+ have an empty address range, due to using asm labels in global scope,
+ which is a known source of problems, as explained in the comment of proc
+ function_range in gdb/testsuite/lib/dwarf.exp. Hence fix this also by
+ using function_range.
+
+ Tested on x86_64-linux with gcc and clang.
+
+2021-10-05 Andrew Burgess <andrew.burgess@embecosm.com>
+
+ gdb/python: add a new gdb_exiting event
+ Add a new event, gdb.events.gdb_exiting, which is called once GDB
+ decides it is going to exit.
+
+ This event is not triggered in the case that GDB performs a hard
+ abort, for example, when handling an internal error and the user
+ decides to quit the debug session, or if GDB hits an unexpected,
+ fatal, signal.
+
+ This event is triggered if the user just types 'quit' at the command
+ prompt, or if GDB is run with '-batch' and has processed all of the
+ required commands.
+
+ The new event type is gdb.GdbExitingEvent, and it has a single
+ attribute exit_code, which is the value that GDB is about to exit
+ with.
+
+ The event is triggered before GDB starts dismantling any of its own
+ internal state, so, my expectation is that most Python calls should
+ work just fine at this point.
+
+ When considering this functionality I wondered about using the
+ 'atexit' Python module. However, this is triggered when the Python
+ environment is shut down, which is done from a final cleanup. At
+ this point we don't know for sure what other GDB state has already
+ been cleaned up.
+
+2021-10-05 Andrew Burgess <andrew.burgess@embecosm.com>
+
+ gdb/python: update events test to handle missing exit_code
+ The test gdb.python/py-events.exp sets up a handler for the gdb.exited
+ event. Unfortunately the handler is slightly broken, it assumes that
+ the exit_code attribute will always be present. This is not always
+ the case.
+
+ In a later commit I am going to add more tests to py-events.exp test
+ script, and in so doing I expose the bug in our handling of gdb.exited
+ events.
+
+ Just to be clear, GDB itself is fine, it is the test that is not
+ written correctly according to the Python Events API.
+
+ So, in this commit I fix the Python code in the test, and extend the
+ test case to exercise more paths through the Python code.
+
+ Additionally, I noticed that the gdb.exited event is used as an
+ example in the documentation for how to write an event handler.
+ Unfortunately the same bug that we had in our test was also present in
+ the example code in the manual.
+
+ So I've fixed that too.
+
+ After this commit there is no functional change to GDB.
+
+2021-10-05 GDB Administrator <gdbadmin@sourceware.org>
+
+ Automatic date update in version.in
+
+2021-10-04 Tom Tromey <tromey@adacore.com>
+
+ Use unique_xmalloc_ptr<char> when demangling
+ I noticed that some methods in language_defn could use
+ unique_xmalloc_ptr<char> rather than a plain 'char *'. This patch
+ implements this change, fixing up the fallout and changing
+ gdb_demangle to also return this type. In one spot, std::string is
+ used to simplify some related code, and in another, an auto_obstack is
+ used to avoid manual management.
+
+ Regression tested on x86-64 Fedora 34.
+
+2021-10-04 Tom Tromey <tromey@adacore.com>
+
+ Minor boolean fix in windows-nat.c
+ I noticed a spot in windows-nat.c that used '1' rather than the more
+ appropriate 'true'. This patch fixes it.
+
+2021-10-04 Tom de Vries <tdevries@suse.de>
+
+ [gdb/build] Add CXX_DIALECT to CXX
+ Say we use a gcc version that (while supporting c++11) does not support c++11
+ by default, and needs an -std setting to enable it.
+
+ If gdb would use the default AX_CXX_COMPILE_STDCXX from autoconf-archive, then
+ we'd have:
+ ...
+ CXX="g++ -std=gnu++11"
+ ...
+
+ That mechanism however has the following problem (quoting from commit
+ 0bcda685399):
+ ...
+ the top level Makefile passes CXX down to subdirs, and that overrides whatever
+ gdb/Makefile may set CXX to. The result would be that a make invocation from
+ the build/gdb/ directory would use "g++ -std=gnu++11" as expected, while a
+ make invocation at the top level would not.
+ ...
+
+ Commit 0bcda685399 fixes this by using a custom AX_CXX_COMPILE_STDCXX which
+ does:
+ ...
+ CXX=g++
+ CXX_DIALECT=-std=gnu++11
+ ...
+
+ The problem reported in PR28318 is that using the custom instead of the
+ default AX_CXX_COMPILE_STDCXX makes the configure test for std::thread
+ support fail.
+
+ We could simply add $CXX_DIALECT to the test for std::thread support, but
+ that would have to be repeated for each added c++ support test.
+
+ Instead, fix this by doing:
+ ...
+ CXX="g++ -std=gnu++11"
+ CXX_DIALECT=-std=gnu++11
+ ...
+
+ This is somewhat awkward, since it results in -std=gnu++11 occuring twice in
+ some situations:
+ ...
+ $ touch src/gdb/dwarf2/read.c
+ $ ( cd build/gdb; make V=1 dwarf2/read.o )
+ g++-4.8 -std=gnu++11 -x c++ -std=gnu++11 ...
+ ...
+
+ However, both settings are needed:
+ - the switch in CXX for the std::thread tests (and other tests)
+ - the switch in CXX_DIALECT so it can be appended in Makefiles, to
+ counteract the fact that the top-level Makefile overrides CXX
+
+ The code added in gdb/ax_cxx_compile_stdcxx.m4 is copied from the default
+ AX_CXX_COMPILE_STDCXX from autoconf-archive.
+
+ Tested on x86_64-linux.
+
+ Bug: https://sourceware.org/bugzilla/show_bug.cgi?id=28318
+
+2021-10-04 Simon Marchi <simon.marchi@polymtl.ca>
+
+ [gdb/symtab] Use unrelocated addresses in call_site
+ Consider test-case gdb.trace/entry-values.exp with target board
+ unix/-fPIE/-pie.
+
+ Using this command we have an abbreviated version, and can see the correct
+ @entry values for foo:
+ ...
+ $ gdb -q -batch outputs/gdb.trace/entry-values/entry-values \
+ -ex start \
+ -ex "break foo" \
+ -ex "set print entry-values both" \
+ -ex continue
+ Temporary breakpoint 1 at 0x679
+
+ Temporary breakpoint 1, 0x0000555555554679 in main ()
+ Breakpoint 2 at 0x55555555463e
+
+ Breakpoint 2, 0x000055555555463e in foo (i=0, i@entry=2, j=2, j@entry=3)
+ ...
+
+ Now, let's try the same again, but run directly to foo rather than stopping at
+ main:
+ ...
+ $ gdb -q -batch outputs/gdb.trace/entry-values/entry-values \
+ -ex "break foo" \
+ -ex "set print entry-values both" \
+ -ex run
+ Breakpoint 1 at 0x63e
+
+ Breakpoint 1, 0x000055555555463e in foo (i=0, i@entry=<optimized out>, \
+ j=2, j@entry=<optimized out>)
+ ...
+
+ So, what explains the difference? Noteworthy, this is a dwarf assembly
+ test-case, with debug info for foo and bar, but not for main.
+
+ In the first case:
+ - we run to main
+ - this does not trigger expanding debug info, because there's none for main
+ - we set a breakpoint at foo
+ - this triggers expanding debug info. Relocated addresses are used in
+ call_site info (because the exec is started)
+ - we continue to foo, and manage to find the call_site info
+
+ In the second case:
+ - we set a breakpoint at foo
+ - this triggers expanding debug info. Unrelocated addresses are used in
+ call_site info (because the exec is not started)
+ - we run to foo
+ - this triggers objfile_relocate1, but it doesn't update the call_site
+ info addresses
+ - we don't manage to find the call_site info
+
+ We could fix this by adding the missing call_site relocation in
+ objfile_relocate1.
+
+ This solution however is counter-trend in the sense that we're trying to
+ work towards the situation where when starting two instances of an executable,
+ we need only one instance of debug information, implying the use of
+ unrelocated addresses.
+
+ So, fix this instead by using unrelocated addresses in call_site info.
+
+ Tested on x86_64-linux.
+
+ This fixes all remaining unix/-fno-PIE/-no-pie vs unix/-fPIE/-pie
+ regressions, like f.i. PR24892.
+
+ Bug: https://sourceware.org/bugzilla/show_bug.cgi?id=24892
+
+ Co-Authored-By: Tom de Vries <tdevries@suse.de>
+
+2021-10-04 Simon Marchi <simon.marchi@polymtl.ca>
+
+ [gdb/symtab] C++-ify call_site
+ - add constructor
+ - add member function call_site::pc ()
+
+ Tested on x86_64-linux.
+
+ Co-Authored-By: Tom de Vries <tdevries@suse.de>
+
+2021-10-04 Tom de Vries <tdevries@suse.de>
+
+ [gdb/symtab] Add call_site_eq and call_site_hash
+ In commit b4c919f7525 "[gdb/symtab] Fix htab_find_slot call in
+ read_call_site_scope" , I removed the comment:
+ ...
+ It must be the first field as we overload core_addr_hash and core_addr_eq for
+ it.
+ ...
+ for field pc of struct call_site.
+
+ However, this was not tested, and when indeed moving field pc to the second
+ location, we run into a testsuite failure in gdb.trace/entry-values.exp.
+
+ This is caused by core_addr_eq (the eq_f function for the htab) being
+ called with a pointer to the pc field (as passed into htab_find_slot) and a
+ pointer to a hash table element. Now that pc is no longer the first field,
+ the pointer to hash table element no longer points to the pc field.
+
+ This could be fixed by simply reinstating the comment, but we're trying to
+ get rid of this kind of tricks that make refactoring more difficult.
+
+ Instead, fix this by:
+ - reverting commit b4c919f7525, apart from the comment removal, such that
+ we're passing a pointer to element to htab_find_slot
+ - updating the htab_find_slot call in compunit_symtab::find_call_site
+ in a similar manner
+ - adding a call_site_eq and call_site_hash, and using these in the hash table
+ instead of core_addr_eq and core_addr_hash.
+
+ Tested on x86_64-linux, both with and without a trigger patch that moves pc to
+ the second location in struct call_site.
+
+2021-10-04 Tom Tromey <tromey@adacore.com>
+
+ Fix remote-sim.c compilation
+ The change "make string-like set show commands use std::string
+ variable" caused remote-sim.c to fail to build. The issue is that the
+ code does:
+
+ const std::string &sysroot = gdb_sysroot;
+ if (is_target_filename (sysroot))
+ sysroot += strlen (TARGET_SYSROOT_PREFIX);
+
+ ... which isn't valid.
+
+ This patch changes this code to use a 'const char *' again, fixing the
+ build.
+
+2021-10-04 Bruno Larsen <blarsen@redhat.com>
+
+ [gdb/testsuite] update analyze-racy-logs.py to python3
+ Since python 2 is no longer supported on most distributions, update the
+ script to run under python while while still being runnable under
+ python2.
+
+2021-10-04 Andrew Burgess <andrew.burgess@embecosm.com>
+
+ gdbsupport: remove attempt to define TARGET_WORD_SIZE
+ In the gdbsupport configure.ac file, there is an attempt to define
+ TARGET_WORD_SIZE. This is done by running grep on the file
+ ../bfd/bfd-in3.h.
+
+ The problem with this is, the file bfd-in3.h is generated into the bfd
+ build directory when bfd is configured, and there is no dependency
+ between the gdbsupport module and the bfd module, so, for example, if
+ I do:
+
+ $ ../src/configure
+ $ make all-gdbsupport
+
+ Then bfd will neither be configured, or built. In this case
+ TARGET_WORD_SIZE ends up being defined, but with no value because the
+ grep on bfd-in3.h fails.
+
+ However, it turns out that this doesn't matter; we don't actually use
+ TARGET_WORD_SIZE anywhere.
+
+ My proposal in this commit is to just remove the definition of
+ TARGET_WORD_SIZE, the alternative would be to add a dependency between
+ configure-gdbsupport and configure-bfd into Makefile.def, but adding a
+ dependency for something we don't need seems pretty pointless.
+
+2021-10-04 Mike Frysinger <vapier@gentoo.org>
+
+ sim: add --info-target for listing supported BFD targets
+ It can be difficult to guess the exact bfd name, so add an option to
+ list all the targets that the current build supports. This aligns with
+ other simulator options like --info-architecture.
+
+2021-10-04 GDB Administrator <gdbadmin@sourceware.org>
+
+ Automatic date update in version.in
+
+2021-10-03 Lancelot SIX <lsix@lancelotsix.com>
+
+ gdb: Setting setter return a bool to tell if the value changed
+ GDB can notify observers when a parameter is changed.
+
+ To do that, do_set_command (in gdb/cli/cli-setshow.c) compares the new
+ value against the old one before updating it, and based on that notifies
+ observers. This looks like something like:
+
+ int valuechanged = 0;
+ switch (cmd->var.type ())
+ {
+ case var_integer:
+ {
+ LONGEST new_val = parse_and_eval_long (arg)
+ if (new_val != cmd->var.get<int> ())
+ {
+ cmd->var.get<int> (new_val);
+ value_changes = 1;
+ }
+ }
+ case var_uinteger:
+ case var_zuinteger:
+ {
+ unsigned int val
+ = parse_cli_var_uinteger (c->var->type (), &arg, true);
+ if (c->var->get<unsigned int> () != val)
+ {
+ c->var->set<unsigned int> (val);
+ option_changed = true;
+ }
+ }
+ case...
+ /* And so on for all possible var_types. */
+ }
+
+ This comparison is done for each possible var_type, which leads to
+ unnecessary logic duplication.
+
+ In this patch I propose to move all those checks in one place within the
+ setting setter method. This limits the code duplication and simplifies
+ the do_set_command implementation.
+
+ This patch also changes slightly the way a value change is detected.
+ Instead of comparing the user provided value against the current value
+ of the setting, we compare the value of the setting before and after the
+ set operation. This is meant to handle edge cases where trying to set
+ an unrecognized value would be equivalent to a noop (the actual value
+ remains unchanged). Doing this requires that the original value needs
+ to be copied before the update, which can be non trivial for
+ std::string.
+
+ There should be no user visible change introduced by this commit.
+
+ Tested on x86_64 GNU/Linux.
+
+ [1] https://review.lttng.org/c/binutils-gdb/+/5831/41
+
+ Change-Id: If064b9cede3eb56275aacd2b286f74eceb1aed11
+
+2021-10-03 Lancelot SIX <lsix@lancelotsix.com>
+ Simon Marchi <simon.marchi@polymtl.ca>
+
+ gdb: Have setter and getter callbacks for settings
+ The main motivation behind this improvement is to help the
+ implementation of a patch Simon Marchi is preparing to fix a bug when
+ MI or Python try to access parameters that are inferior dependent (see
+ PR/28085).
+
+ This commit extends the previous ones, which introduces the setting
+ object to represent a static variable whose value can be set or shown
+ with the appropriate commands. This patch proposes that a setting can
+ either contain a pointer to a static variable holding a setting, or
+ pointers to a pair of setter and getter callback functions.
+
+ The callbacks functions can be used to retrieve or change the value with
+ custom logic. This is useful when the source of truth for a given
+ setting is not contained in the variable pointed to by the setting
+ instance.
+
+ Given that the callback function call is hidden within the setting
+ abstraction introduced earlier, none of the sites accessing the setting
+ needs to be updated. The registered getter or setter is used whatever
+ the way to access it is (through MI, Python, Guile, the "with" command
+ and the $_gdb_setting / $_gdb_setting_str convenience functions).
+
+ All the add_setshow_*_cmd are given a new overload that will accept the
+ pair of function pointers (set / get functions) instead of the pointer
+ to a global variable.
+
+ Tested on GNU/Linux x86_64 with no regression observed.
+
+ Change-Id: Ieb81fef57550632ff66e6aa85f637372a226be8c
+
+2021-10-03 Simon Marchi <simon.marchi@efficios.com>
+ Lancelot SIX <lsix@lancelotsix.com>
+
+ gdb: make string-like set show commands use std::string variable
+ String-like settings (var_string, var_filename, var_optional_filename,
+ var_string_noescape) currently take a pointer to a `char *` storage
+ variable (typically global) that holds the setting's value. I'd like to
+ "mordernize" this by changing them to use an std::string for storage.
+
+ An obvious reason is that string operations on std::string are often
+ easier to write than with C strings. And they avoid having to do any
+ manual memory management.
+
+ Another interesting reason is that, with `char *`, nullptr and an empty
+ string often both have the same meaning of "no value". String settings
+ are initially nullptr (unless initialized otherwise). But when doing
+ "set foo" (where `foo` is a string setting), the setting now points to
+ an empty string. For example, solib_search_path is nullptr at startup,
+ but points to an empty string after doing "set solib-search-path". This
+ leads to some code that needs to check for both to check for "no value".
+ Or some code that converts back and forth between NULL and "" when
+ getting or setting the value. I find this very error-prone, because it
+ is very easy to forget one or the other. With std::string, we at least
+ know that the variable is not "NULL". There is only one way of
+ representing an empty string setting, that is with an empty string.
+
+ I was wondering whether the distinction between NULL and "" would be
+ important for some setting, but it doesn't seem so. If that ever
+ happens, it would be more C++-y and self-descriptive to use
+ optional<string> anyway.
+
+ Actually, there's one spot where this distinction mattered, it's in
+ init_history, for the test gdb.base/gdbinit-history.exp. init_history
+ sets the history filename to the default ".gdb_history" if it sees that
+ the setting was never set - if history_filename is nullptr. If
+ history_filename is an empty string, it means the setting was explicitly
+ cleared, so it leaves it as-is. With the change to std::string, this
+ distinction doesn't exist anymore. This can be fixed by moving the code
+ that chooses a good default value for history_filename to
+ _initialize_top. This is ran before -ex commands are processed, so an
+ -ex command can then clear that value if needed (what
+ gdb.base/gdbinit-history.exp tests).
+
+ Another small improvement, in my opinion is that we can now easily
+ give string parameters initial values, by simply initializing the global
+ variables, instead of xstrdup-ing it in the _initialize function.
+
+ In Python and Guile, when registering a string-like parameter, we
+ allocate (with new) an std::string that is owned by the param_smob (in
+ Guile) and the parmpy_object (in Python) objects.
+
+ This patch started by changing all relevant add_setshow_* commands to
+ take an `std::string *` instead of a `char **` and fixing everything
+ that failed to build. That includes of course all string setting
+ variable and their uses.
+
+ string_option_def now uses an std::string also, because there's a
+ connection between options and settings (see
+ add_setshow_cmds_for_options).
+
+ The add_path function in source.c is really complex and twisted, I'd
+ rather not try to change it to work on an std::string right now.
+ Instead, I added an overload that copies the std:string to a `char *`
+ and back. This means more copying, but this is not used in a hot path
+ at all, so I think it is acceptable.
+
+ Change-Id: I92c50a1bdd8307141cdbacb388248e4e4fc08c93
+
+2021-10-03 Lancelot SIX <lsix@lancelotsix.com>
+ Simon Marchi <simon.marchi@polymtl.ca>
+
+ gdb: Introduce setting construct within cmd_list_element
+ cmd_list_element can contain a pointer to data that can be set and / or
+ shown. This is achieved with the void* VAR member which points to the
+ data that can be accessed, while the VAR_TYPE member (of type enum
+ var_types) indicates how to interpret the data pointed to.
+
+ With this pattern, the user of the cmd_list_element needs to know what
+ is the storage type associated with a given VAR_TYPES in order to do
+ the proper casting. No automatic safeguard is available to prevent
+ miss-use of the pointer. Client code typically looks something like:
+
+ switch (c->var_type)
+ {
+ case var_zuinteger:
+ unsigned int v = *(unsigned int*) c->var;
+ ...
+ break;
+ case var_boolean:
+ bool v = *(bool *) c->var;
+ ...
+ break;
+ ...
+ }
+
+ This patch proposes to add an abstraction around the var_types and void*
+ pointer pair. The abstraction is meant to prevent the user from having
+ to handle the cast and verify that the data is read or written as a type
+ that is coherent with the setting's var_type. This is achieved by
+ introducing the struct setting which exposes a set of templated get /
+ set member functions. The template parameter is the type of the
+ variable that holds the referred variable.
+
+ Using those accessors allows runtime checks to be inserted in order to
+ ensure that the data pointed to has the expected type. For example,
+ instantiating the member functions with bool will yield something
+ similar to:
+
+ const bool &get<bool> () const
+ {
+ gdb_assert (m_var_type == var_boolean);
+ gdb_assert (m_var != nullptr);
+ return *static_cast<bool *> (m_var);
+ }
+ void set<bool> (const bool &var)
+ {
+ gdb_assert (m_var_type == var_boolean);
+ gdb_assert (m_var != nullptr);
+ *static_cast<bool *> (m_var) = var;
+ }
+
+ Using the new abstraction, our initial example becomes:
+
+ switch (c->var_type)
+ {
+ case var_zuinteger:
+ unsigned int v = c->var->get<unsigned int> ();
+ ...
+ break;
+ case var_boolean:
+ bool v = c->var->get<bool> ();
+ ...
+ break;
+ ...
+ }
+
+ While the call site is still similar, the introduction of runtime checks
+ help ensure correct usage of the data.
+
+ In order to avoid turning the bulk of add_setshow_cmd_full into a
+ templated function, and following a suggestion from Pedro Alves, a
+ setting can be constructed from a pre validated type erased reference to
+ a variable. This is what setting::erased_args is used for.
+
+ Introducing an opaque abstraction to describe a setting will also make
+ it possible to use callbacks to retrieve or set the value of the setting
+ on the fly instead of pointing to a static chunk of memory. This will
+ be done added in a later commit.
+
+ Given that a cmd_list_element may or may not reference a setting, the
+ VAR and VAR_TYPES members of the struct are replaced with a
+ gdb::optional<setting> named VAR.
+
+ Few internal function signatures have been modified to take into account
+ this new abstraction:
+
+ -The functions value_from_setting, str_value_from_setting and
+ get_setshow_command_value_string used to have a 'cmd_list_element *'
+ parameter but only used it for the VAR and VAR_TYPE member. They now
+ take a 'const setting &' parameter instead.
+ - Similarly, the 'void *' and a 'enum var_types' parameters of
+ pascm_param_value and gdbpy_parameter_value have been replaced with a
+ 'const setting &' parameter.
+
+ No user visible change is expected after this patch.
+
+ Tested on GNU/Linux x86_64, with no regression noticed.
+
+ Change-Id: Ie1d08c3ceb8b30b3d7bf1efe036eb8acffcd2f34
+
+2021-10-03 Mike Frysinger <vapier@gentoo.org>
+
+ sim: filter out SIGSTKSZ [PR sim/28302]
+ We map target signals to host signals so we can propagate signals
+ between the host & simulated worlds. That means we need to know
+ the symbolic names & values of all signals that might be sent.
+
+ The tools that generate that list use signal.h and include all
+ symbols that start with "SIG" so as to automatically include any
+ new symbols that the C library might add. Unfortunately, this
+ also picks up "SIGSTKSZ" which is not actually a signal itself,
+ but a signal related setting -- it's the size of the stack when
+ a signal is handled.
+
+ By itself this doesn't super matter as we will never see a signal
+ with that same value (since the range of valid signals tend to be
+ way less than 1024, and the size of the default signal stack will
+ never be that small). But with recent glibc changes that make this
+ into a dynamic value instead of a compile-time constant, some users
+ see build failures when building the sim.
+
+ As suggested by Adam Sampson, update our scripts to ignore this
+ symbol to simplify everything and avoid the build failure.
+
+ Bug: https://sourceware.org/PR28302
+
+2021-10-03 Mike Frysinger <vapier@gentoo.org>
+
+ sim: ppc: fallback when ln is not available [PR sim/18864]
+ Not all systems have easy access to hard links or symlinks, so add
+ fallback logic to the run->psim build code to handle those.
+
+ Bug: https://sourceware.org/PR18864
+
+2021-10-03 Lancelot SIX <lsix@lancelotsix.com>
+
+ gdb: Fix comment in riscv_scan_prologue
+ I found an inaccurate comment in riscv_scan_prologue. This commit fixes
+ it.
+
+2021-10-03 Lancelot SIX <lsix@lancelotsix.com>
+
+ gdb: Support the c.mv insn in the riscv prologue scanner.
+ While working on other problems, I encountered situations where GDB
+ fails to properly unwind the stack because some functions use the C.MV
+ instruction in the prologue. The prologue scanner stops when it hits
+ this instruction assuming its job is done at this point. Unfortunately
+ the prologue is not necessarily finished yet, preventing GDB to properly
+ unwind.
+
+ This commit adds support for handling such instruction in
+ riscv_scan_prologue.
+
+ Note that C.MV is part of the compressed instruction set. The MV
+ counterpart from the base ISA is a pseudo instruction that expands to
+ 'ADDI RD,RS1,0' which is already supported.
+
+ Tested on riscv64-linux-gnu.
+
+ All feedback are welcome.
+
+2021-10-03 GDB Administrator <gdbadmin@sourceware.org>
+
+ Automatic date update in version.in
+
+2021-10-02 Simon Marchi <simon.marchi@polymtl.ca>
+
+ [gdb/symtab] Remove COMPUNIT_CALL_SITE_HTAB
+ Remove macro COMPUNIT_CALL_SITE_HTAB, and provide access to the htab using
+ member functions:
+ - compunit_symtab::find_call_site
+ - compunit_symtab::set_call_site_htab
+
+ Tested on x86_64-linux.
+
+ Co-Authored-By: Tom de Vries <tdevries@suse.de>
+
+2021-10-02 Simon Marchi <simon.marchi@polymtl.ca>
+
+ gdb/python: fix a few flake8 warnings
+ Fix these rather obvious warnings reported by flake8:
+
+ ./lib/gdb/FrameIterator.py:16:1: F401 'gdb' imported but unused
+ ./lib/gdb/FrameIterator.py:17:1: F401 'itertools' imported but unused
+ ./lib/gdb/command/prompt.py:55:26: E712 comparison to False should be 'if cond is False:' or 'if not cond:'
+ ./lib/gdb/command/explore.py:526:9: F841 local variable 'has_explorable_fields' is assigned to but never used
+ ./lib/gdb/command/explore.py:697:56: E712 comparison to False should be 'if cond is False:' or 'if not cond:'
+ ./lib/gdb/command/explore.py:736:62: E712 comparison to False should be 'if cond is False:' or 'if not cond:'
+ ./lib/gdb/command/explore.py:767:61: E712 comparison to False should be 'if cond is False:' or 'if not cond:'
+ ./lib/gdb/command/frame_filters.py:21:1: F401 'copy' imported but unused
+ ./lib/gdb/command/frame_filters.py:22:1: F401 'gdb.FrameIterator.FrameIterator' imported but unused
+ ./lib/gdb/command/frame_filters.py:23:1: F401 'gdb.FrameDecorator.FrameDecorator' imported but unused
+ ./lib/gdb/command/frame_filters.py:25:1: F401 'itertools' imported but unused
+ ./lib/gdb/command/frame_filters.py:179:17: E712 comparison to True should be 'if cond is True:' or 'if cond:'
+
+ Change-Id: I4f49c0cb430359ee872222600c61d9c5283b09ab
+
+2021-10-02 GDB Administrator <gdbadmin@sourceware.org>
+
+ Automatic date update in version.in
+
+2021-10-01 Luis Machado <luis.machado@linaro.org>
+
+ Fix build failure for 32-bit targets
+ When building master GDB, I ran into the following:
+
+ binutils-gdb/gdb/bt-utils.c: In function 'int libbacktrace_print(void*, uintptr_t, const char*, int, const char*)':
+ binutils-gdb/gdb/bt-utils.c:93:44: error: format '%lx' expects argument of type 'long unsigned int', but argument 4 has type 'uintptr_t {aka unsigned int}' [-Werror=format=]
+ snprintf (buf, sizeof (buf), "0x%lx ", pc);
+
+ Fix this by using %PRIxPTR as opposed to %lx.
+
+2021-10-01 Nick Clifton <nickc@redhat.com>
+
+ Fix mistake in RX assembler documentation (special section names)
+
+2021-10-01 Simon Marchi <simon.marchi@polymtl.ca>
+
+ [gdb/symtab] Fix htab_find_slot call in read_call_site_scope
+ In read_call_site_scope we have:
+ ...
+ call_site_local.pc = pc;
+ slot = htab_find_slot (cu->call_site_htab, &call_site_local, INSERT);
+ ...
+
+ The call passes a call_site pointer as element. OTOH, the hashtab is created
+ using hash_f == core_addr_hash and eq_f == core_addr_eq, so the element
+ will be accessed through a CORE_ADDR pointer.
+
+ This is not wrong (at least in C), given that pc is the first field in
+ call_site.
+
+ Nevertheless, as in call_site_for_pc, make the htab_find_slot call match the
+ used hash_f and eq_f by using &pc instead:
+ ...
+ slot = htab_find_slot (cu->call_site_htab, &pc, INSERT);
+ ...
+
+ Tested on x86_64-linux.
+
+ Co-Authored-By: Tom de Vries <tdevries@suse.de>
+
+2021-10-01 Andrea Corallo <andrea.corallo@arm.com>
+
+ PATCH bfd: Fix linker warning for recently introduced arm attributes
+ 2021-09-27 Andrea Corallo <andrea.corallo@arm.com>
+
+ * elf-bfd.h (NUM_KNOWN_OBJ_ATTRIBUTES): Update value to cover
+ 'Tag_BTI_use' and 'Tag_PACRET_use'.
+
+2021-10-01 Simon Marchi <simon.marchi@polymtl.ca>
+
+ gdb/testsuite/dwarf: use options for rnglists/loclists procs
+ Change how rnglists and loclists procs to align them with how procs for
+ aranges (and other things in the DWARF assembler) work. Instead of
+ using "args" (variable number of parameters in TCL) and command-line
+ style option arguments, use one leading "option" parameters, used as a
+ kind of key/value dictionary of options parsed using `parse_options`.
+
+ Change-Id: I63e60d17ae16a020ce4d6de44baf3d152ea42a1a
+
+2021-10-01 Simon Marchi <simon.marchi@polymtl.ca>
+
+ gdb/testsuite/dwarf: don't define nested procs for rnglists/loclists
+ When I wrote support for rnglists and loclists in the testsuite's DWARF
+ assembler, I made it with nested procs, for example proc "table" inside
+ proc "rnglists". The intention was that this proc "table" could only be
+ used by the user while inside proc "rnglists"'s body. I had chosen very
+ simple names, thinking there was no chance of name clashes. I recently
+ learned that this is not how TCL works. This ends up defining a proc
+ "table" in the current namespace ("Dwarf" in this case).
+
+ Things still work if you generate rnglists and loclists in the same
+ file, as each redefines its own procedures when executing. But if a
+ user of the assembler happened to define a convenience "table" or
+ "start_end" procedure, for example, it would get overriden.
+
+ I'd like to change how this works to reduce the chances of a name clash.
+
+ - Move the procs out of each other, so they are not defined in a nested
+ fashion.
+ - Prefix them with "_rnglists_" or "_loclists_".
+ - While calling $body in the various procs, temporarily make the procs
+ available under their "short" name. For example, while in rngllists'
+ body, make _rnglists_table available as just "table". This allows
+ existing code to keep working and keeps it not too verbose.
+ - Modify with_override to allow the overriden proc to not exist. In
+ that case, the temporary proc is deleted on exit.
+
+ Note the non-conforming indentation when calling with_override in
+ _loclists_list. This is on purpose: as we implement more loclists (and
+ rnglists) entry types, the indentation would otherwise get larger and
+ larger without much value for readability. So I think it's reasonable
+ here to put them on the same level.
+
+ Change-Id: I7bb48d26fcb0dba1ae4dada05c0c837212424328
+
+2021-10-01 Simon Marchi <simon.marchi@polymtl.ca>
+
+ gdb: remove TYPE_FIELD_NAME and FIELD_NAME macros
+ Remove the `TYPE_FIELD_NAME` and `FIELD_NAME` macros, changing all the
+ call sites to use field::name directly.
+
+ Change-Id: I6900ae4e1ffab1396e24fb3298e94bf123826ca6
+
+2021-10-01 Simon Marchi <simon.marchi@polymtl.ca>
+
+ gdb: add field::name / field::set_name
+ Add the `name` and `set_name` methods on `struct field`, in order to
+ remove `FIELD_NAME` and `TYPE_FIELD_NAME` macros. In this patch, the
+ macros are changed to use `field::name`, so all the call sites that are
+ used to set the field's name are changed to use `field::set_name`.
+ The next patch will remove the macros completely.
+
+ Note that because of the name clash between the existing field named
+ `name` and the new method, I renamed the field `m_name`. It is not
+ private per-se, because we can't make `struct field` a non-POD yet, but
+ it should be considered private anyway (not accessed outside `struct
+ field`).
+
+ Change-Id: If16ddbca4e0c39d0ff9da420bb5cdebe5b9b0896
+
+2021-10-01 GDB Administrator <gdbadmin@sourceware.org>
+
+ Automatic date update in version.in
+
+2021-09-30 Sergio Durigan Junior <sergiodj@sergiodj.net>
+
+ [PR gdb/28369] Use get_shell on gdb/ser-pipe.c
+ PR gdb/28369 reports that gdb/ser-pipe.c has an 'execl' function call
+ with a hard-coded "/bin/sh" as its argument. We've had 'get_shell'
+ for a while now, which is conscious about the SHELL environment and a
+ better alternative to always calling "/bin/sh".
+
+ Bug: https://sourceware.org/bugzilla/show_bug.cgi?id=28369
+
+2021-09-30 Tom de Vries <tdevries@suse.de>
+
+ [gdb/testsuite] Add untested for missing xml support in gdb.base/valgrind*.exp
+ Add untested in case missing xml support is detected in test-cases
+ gdb.base/valgrind*.exp.
+
+ Tested on x86_64-linux.
+
+2021-09-30 Przemyslaw Wirkus <przemyslaw.wirkus@arm.com>
+
+ arm: enable Cortex-R52+ CPU
+ Patch is adding Cortex-R52+ as 'cortex-r52plus' command line
+ flag for -mcpu option.
+
+ bfd/
+
+ * cpu-arm.c: New Cortex-R52+ CPU.
+
+ gas/
+
+ * NEWS: Update docs.
+ * config/tc-arm.c: New Cortex-R52+ CPU.
+ * doc/c-arm.texi: Update docs.
+ * testsuite/gas/arm/cpu-cortex-r52plus.d: New test.
+
+2021-09-30 Przemyslaw Wirkus <przemyslaw.wirkus@arm.com>
+
+ aarch64: Enable Cortex-X2 CPU
+ This patch is adding support for Cortex-X2 CPU.
+
+ gas:
+
+ * NEWS: Update docs.
+ * config/tc-aarch64.c: Add Cortex-X2.
+ * doc/c-aarch64.texi: Update docs.
+
+2021-09-30 Przemyslaw Wirkus <przemyslaw.wirkus@arm.com>
+
+ aarch64: Enable Cortex-A710 CPU
+ This patch is adding support for Cortex-A710 CPU.
+
+ gas/
+
+ * NEWS: Update docs.
+ * config/tc-aarch64.c: Add Cortex-A710.
+ * doc/c-aarch64.texi: Update docs.
+
+2021-09-30 Przemyslaw Wirkus <przemyslaw.wirkus@arm.com>
+
+ aarch64: Enable Cortex-A510 CPU
+ This patch is adding support for Cortex-A510 CPU.
+
+ gas/
+
+ * NEWS: Update docs.
+ * config/tc-aarch64.c: Add Cortex-A510.
+ * doc/c-aarch64.texi: Update docs.
+
+2021-09-30 Przemyslaw Wirkus <przemyslaw.wirkus@arm.com>
+
+ aarch64: Update AArch64 features command line options docs 2/2
+ Patch is only sorting by 'Extension` column 'Architecture Extension'
+ table.
+
+ gas/
+
+ * doc/c-aarch64.texi: Update docs.
+
+2021-09-30 Przemyslaw Wirkus <przemyslaw.wirkus@arm.com>
+
+ aarch64: Update AArch64 features command line options docs 1/2
+ Patch is improving entries in "Architecture extensions" table in GAS
+ documentation.
+
+ gas/
+
+ * doc/c-aarch64.texi: Update docs.
+
+2021-09-30 Przemyslaw Wirkus <przemyslaw.wirkus@arm.com>
+
+ aarch64: add armv9-a architecture to -march
+ Patch is adding new 'armv9-a` command line flag to -march for AArch64.
+
+ gas/
+
+ * config/tc-aarch64.c: Add 'armv9-a' command line flag.
+ * docs/c-aarch64.text: Update docs.
+ * NEWS: Update docs.
+
+ include/
+
+ * opcode/aarch64.h (AARCH64_FEATURE_V9): New define.
+ (AARCH64_ARCH_V9): New define.
+
+2021-09-30 Simon Marchi <simon.marchi@polymtl.ca>
+
+ gdb/testsuite: make runto_main not pass no-message to runto
+ As follow-up to this discussion:
+
+ https://sourceware.org/pipermail/gdb-patches/2020-August/171385.html
+
+ ... make runto_main not pass no-message to runto. This means that if we
+ fail to run to main, for some reason, we'll emit a FAIL. This is the
+ behavior we want the majority of (if not all) the time.
+
+ Without this, we rely on tests logging a failure if runto_main fails,
+ otherwise. They do so in a very inconsisteny mannet, sometimes using
+ "fail", "unsupported" or "untested". The messages also vary widly.
+ This patch removes all these messages as well.
+
+ Also, remove a few "fail" where we call runto (and not runto_main). by
+ default (without an explicit no-message argument), runto prints a
+ failure already. In two places, gdb.multi/multi-re-run.exp and
+ gdb.python/py-pp-registration.exp, remove "message" passed to runto.
+ This removes a few PASSes that we don't care about (but FAILs will still
+ be printed if we fail to run to where we want to). This aligns their
+ behavior with the rest of the testsuite.
+
+ Change-Id: Ib763c98c5f4fb6898886b635210d7c34bd4b9023
+
+2021-09-30 Simon Marchi <simon.marchi@polymtl.ca>
+
+ gdbsupport: make gdb_mkostemp_cloexec return a scoped_fd
+ This encourages the callers to use automatic file descriptor management.
+
+ Change-Id: I137a81df6f3607b457e28c35aafde8ed6f3a3344
+
+2021-09-30 Simon Marchi <simon.marchi@polymtl.ca>
+
+ gdbsupport: make gdb_open_cloexec return scoped_fd
+ Make gdb_open_cloexec return a scoped_fd, to encourage using automatic
+ management of the file descriptor closing. Except in the most trivial
+ cases, I changed the callers to just release the fd, which retains their
+ existing behavior. That will allow the transition to using scoped_fd
+ more to go gradually, one caller at a time.
+
+ Change-Id: Ife022b403f96e71d5ebb4f1056ef6251b30fe554
+
+2021-09-30 Simon Marchi <simon.marchi@polymtl.ca>
+
+ gdbsupport: move gdb_file_up to its own file
+ The following patches wants to change gdb_fopen_cloexec and
+ gdb_mkostemp_cloexec to return a scoped_fd. Doing this causes a cyclic
+ include between scoped_fd.h and filestuff.h, that both want to include
+ each other. scoped_fd.h includes filestuff.h because of the
+ scoped_fd::to_file method's return value. filestuff.h would then
+ include scoped_fd.h for gdb_fopen_cloexec's and gdb_mkostemp_cloexec's
+ return values.
+
+ To fix that, move gdb_file_up to its own file, gdb_file.h.
+
+ Change-Id: Ic82a48914b2aacee8f14af535b7469245f88b93d
+
+2021-09-30 Dimitar Dimitrov <dimitar@dinux.eu>
+
+ ld: pru: Fix resource_table output section alignment
+ My commit 261980de18b added alignment for the resource table symbol.
+ But it is wrong. The Linux remoteproc driver loads and interprets the
+ contents of the .resource_table ELF section, not of a table symbol.
+
+ Without this patch, if the linker happens to output padding for symbol
+ alignment, then the resource table contents as viewed by the kernel
+ loader would "shift" and look corrupted.
+
+ ld/ChangeLog:
+
+ * scripttempl/pru.sc (.resource_table): Align the output
+ section, not the first symbol.
+
+2021-09-30 Tom Tromey <tromey@adacore.com>
+
+ Fix Windows crash from stop_pc change
+ The "make thread_suspend_state::stop_pc optional" patch caused a
+ regression on Windows when using shared libraries. I tracked this
+ down to an unguarded use of stop_pc() in the TARGET_WAITKIND_LOADED
+ case of handle_inferior_event. This patch fixes the bug by ensuring
+ that the stop PC is set at this point.
+
+2021-09-30 Tom de Vries <tdevries@suse.de>
+
+ [gdb/testsuite] Use untested in gdb.debuginfod/fetch_src_and_symbols.exp
+ With running test-case gdb.debuginfod/fetch_src_and_symbols.exp with target
+ board unix/-bad, I get:
+ ...
+ gcc: error: unrecognized command line option '-bad'^M
+ compiler exited with status 1
+ gdb compile failed, gcc: error: unrecognized command line option '-bad'
+ FAIL: gdb.debuginfod/fetch_src_and_symbols.exp: compile
+ ...
+
+ Replace the FAIL with the usual:
+ ...
+ UNTESTED: gdb.debuginfod/fetch_src_and_symbols.exp: failed to compile
+ ...
+
+ Tested on x86_64-linux.
+
+2021-09-30 Tom de Vries <tdevries@suse.de>
+
+ [gdb/testsuite] Remove redundant FAIL in gdb.base/info-os.exp
+ When running test-case gdb.base/info-os.exp with target board unix/-bad, I run
+ into:
+ ...
+ gdb compile failed, gcc: error: unrecognized command line option '-bad'
+ UNTESTED: gdb.base/info-os.exp: failed to prepare
+ FAIL: gdb.base/info-os.exp: cannot compile test program
+ ...
+
+ Remove the redundant FAIL.
+
+ Tested on x86_64-linux.
+
+2021-09-30 Tom de Vries <tdevries@suse.de>
+
+ [gdb/testsuite] Fix DUPLICATE in gdb.base/info-os.exp
+ When running test-case gdb.base/info-os.exp, I run into:
+ ...
+ PASS: gdb.base/info-os.exp: get threads
+ PASS: gdb.base/info-os.exp: get threads
+ DUPLICATE: gdb.base/info-os.exp: get threads
+ ...
+
+ Fix this not doing pass followed by exp_continue in gdb_test_multiple.
+
+ Tested on x86_64-linux.
+
+2021-09-30 Tom de Vries <tdevries@suse.de>
+
+ [gdb/testsuite] Check compilation result in gdb.dwarf2/dw2-opt-structptr.exp
+ When running test-case gdb.dwarf2/dw2-opt-structptr.exp with target board
+ unix/-bad, I get:
+ ...
+ gdb compile failed, gcc: error: unrecognized command line option '-bad'
+ UNTESTED: gdb.dwarf2/dw2-opt-structptr.exp: dw2-opt-structptr.exp
+ UNTESTED: gdb.dwarf2/dw2-opt-structptr.exp: failed to compile
+ ERROR: (dw2-opt-structptr) No such file or directory
+ UNRESOLVED: gdb.dwarf2/dw2-opt-structptr.exp: console: set print object on
+ ...
+
+ Merge the two UNTESTEDs.
+
+ Fix the UNRESOLVED by checking result of compilation.
+
+ Tested on x86_64-linux.
+
+2021-09-30 Tom de Vries <tdevries@suse.de>
+
+ [gdb/testsuite] Check compilation result in gdb.base/structs.exp
+ When running test-case gdb.base/structs.exp with target board unix/-bad, I
+ get:
+ ...
+ gdb compile failed, gcc: error: unrecognized command line option '-bad'
+ UNTESTED: gdb.base/structs.exp: failed to prepare
+ ERROR: tcl error sourcing src/gdb/testsuite/gdb.base/structs.exp.
+ ERROR: can't read "use_gdb_stub": no such variable
+ ...
+
+ Fix this by checking the compilation result.
+
+ Fix the resulting DUPLICATEs using with_test_prefix.
+
+ Tested on x86_64-linux.
+
+2021-09-30 Tom de Vries <tdevries@suse.de>
+
+ [gdb/testsuite] Prepare nodebug exec in gdb.base/cvexpr.exp
+ When running test-case gdb.base/cvexpr.exp with target board unix/-bad, I get:
+ ...
+ gdb compile failed, gcc: error: unrecognized command line option '-bad'
+ ERROR: tcl error sourcing src/gdb/testsuite/gdb.base/cvexpr.exp.
+ ERROR: can't read "use_gdb_stub": no such variable
+ ...
+
+ This is triggered in a part of the test that claims to require no debug
+ information, but uses the exec containing either dwarf or ctf.
+
+ Fix this by preparing another executable compiled with nodebug, and using
+ that one instead.
+
+ Also use with_test_prefix to mark the nodebug part, such that we have:
+ ...
+ gdb compile failed, gcc: error: unrecognized command line option '-bad'
+ UNTESTED: gdb.base/cvexpr.exp: dwarf: failed to prepare
+ gdb compile failed, gcc: error: unrecognized command line option '-bad'
+ UNTESTED: gdb.base/cvexpr.exp: nodebug: failed to prepare
+ ...
+
+ Tested on x86_64-linux.
+
+2021-09-30 Tom de Vries <tdevries@suse.de>
+
+ [gdb/testsuite] Fix DUPLICATE in gdb.base/cvexpr.exp
+ Fix:
+ ...
+ DUPLICATE: gdb.base/cvexpr.exp: ptype int * restrict
+ ...
+ using with_test_prefix.
+
+ Tested on x86_64-linux.
+
+2021-09-30 Tom de Vries <tdevries@suse.de>
+
+ [gdb/testsuite] Check compilation result in gdb.base/call-sc.exp
+ When running test-case gdb.base/call-sc.exp with target board unix/-bad, I
+ get:
+ ...
+ gdb compile failed, gcc: error: unrecognized command line option '-bad'
+ UNTESTED: gdb.base/call-sc.exp: failed to prepare
+ ERROR: tcl error sourcing src/gdb/testsuite/gdb.base/call-sc.exp.
+ ERROR: can't read "use_gdb_stub": no such variable
+ ...
+
+ Fix this by checking the compilation result.
+
+ Fix the resulting DUPLICATE:
+ ...
+ DUPLICATE: gdb.base/call-sc.exp: failed to prepare
+ ...
+ using with_test_prefix.
+
+ Tested on x86_64-linux.
+
+2021-09-30 Tom de Vries <tdevries@suse.de>
+
+ [gdb/testsuite] Fix untested messages in gdb.mi/*.exp
+ The effect of:
+ ...
+ untested "y.exp"
+ ...
+ in a gdb.x/y.exp is:
+ ...
+ UNTESTED: gdb.x/y.exp: y.exp
+ ...
+ which is a bit pointless.
+
+ Replace these untested messages in gdb.mi/*.exp with the usual "failed to
+ compile".
+
+ Likewise for an:
+ ...
+ untested $testname
+ ...
+ where the variable is undefined.
+
+ Tested on x86_64-linux.
+
+2021-09-30 Nick Clifton <nickc@redhat.com>
+
+ make objcopy fail if it is asked to redefine symbols in an object file containing LTO information.
+ * objcopy.c (filter_symbols): Fail if attempting to dredefine
+ symbols in an LTO object file.
+
+2021-09-30 Tom de Vries <tdevries@suse.de>
+
+ [gdb/testsuite] Fix full buffer in gdb.rust/dwindex.exp
+ On ubuntu 18.04.5, I run into:
+ ...
+ (gdb) mt print objfiles dwindex^M
+ ^M
+ Object file build/gdb/testsuite/outputs/gdb.rust/dwindex/dwindex: \
+ Objfile at 0x55dab0b87a50, bfd at 0x55dab0b0cfa0, 1095 minsyms^M
+ ^M
+ Psymtabs:^M
+ vendor/compiler_builtins/src/int/specialized_div_rem/mod.rs at 0x55dab0db0720^M
+ ...
+ library/std/src/sys/unix/stdio.rs at 0x55dab0d96320^M
+ ERROR: internal buffer is full.
+ UNRESOLVED: gdb.rust/dwindex.exp: check if index present
+ ...
+
+ Fix this by using -lbl in proc ensure_gdb_index.
+
+ Tested on x86_64-linux.
+
+2021-09-30 Libor Bukata <libor.bukata@oracle.com>
+
+ Add Solaris specific ELF note processing
+ Add elfcore_grok_solaris_note function that enables to
+ obtain process status, register values, and program info
+ from Solaris's core files.
+
+ bfd/
+ * elf.c (elfcore_grok_solaris_note): Solaris specific ELF
+ note parser. Better GDB's coredump analysis on Solaris...
+ (elfcore_grok_solaris_note_impl): New function.
+ (elfcore_grok_solaris_prstatus): New function.
+ (elfcore_grok_solaris_info): New function.
+ (elfcore_grok_solaris_lwpstatus): New function.
+ (elf_parse_notes): Added "CORE" groker element.
+ include/
+ * elf/common.h: Add note segment constants for core files on
+ Solaris systems.
+
+2021-09-30 Frederic Cambus <fred@statdns.com>
+
+ Add support to readelf for reading OpenBSD ELF core notes.
+ * readelf.c (get_openbsd_elfcore_note_type): New function.
+ (process_note): Add support for OpenBSD core notes.
+
+2021-09-30 GDB Administrator <gdbadmin@sourceware.org>
+
+ Automatic date update in version.in
+
+2021-09-29 Tom de Vries <tdevries@suse.de>
+
+ [gdb/testsuite] Fix gdb.base/break-interp.exp for ld.so without debug
+ When running test-case gdb.base/break-interp.exp on openSUSE Leap 42.3, I get:
+ ...
+ (gdb) info addr dl_main^M
+ Symbol "dl_main" is at 0x1750 in a file compiled without debugging.^M
+ (gdb) FAIL: gdb.base/break-interp.exp: info addr dl_main
+ ...
+ while the regexp expects "Symbol \"dl_main\" is a function at address $hex\\."
+
+ Fix this by also accepting this variant.
+
+ Tested on x86_64-linux.
+
+2021-09-29 H.J. Lu <hjl.tools@gmail.com>
+
+ Add a testcase for PR binutils/27202
+ PR binutils/27202
+ * testsuite/gas/elf/dwarf-5-loc0.d: New file.
+ * testsuite/gas/elf/dwarf-5-loc0.s: Likewise.
+ * testsuite/gas/elf/elf.exp: Run dwarf-5-loc0.
+
+2021-09-29 Pedro Alves <pedro@palves.net>
+
+ Fix gdb.multi/multi-term-settings.exp race
+ The gdb.multi/multi-term-settings.exp testcase sometimes fails like so:
+
+ Running /home/pedro/gdb/mygit/src/gdb/testsuite/gdb.multi/multi-term-settings.exp ...
+ FAIL: gdb.multi/multi-term-settings.exp: inf1_how=attach: inf2_how=attach: stop with control-c (SIGINT)
+
+ It's easier to reproduce if you stress the machine at the same time, like e.g.:
+
+ $ stress -c 24
+
+ Looking at gdb.log, we see:
+
+ (gdb) attach 60422
+ Attaching to program: build/gdb/testsuite/outputs/gdb.multi/multi-term-settings/multi-term-settings, process 60422
+ [New Thread 60422.60422]
+ Reading symbols from /lib/x86_64-linux-gnu/libc.so.6...
+ Reading symbols from /usr/lib/debug//lib/x86_64-linux-gnu/libc-2.31.so...
+ Reading symbols from /lib64/ld-linux-x86-64.so.2...
+ (No debugging symbols found in /lib64/ld-linux-x86-64.so.2)
+ 0x00007f2fc2485334 in __GI___clock_nanosleep (clock_id=<optimized out>, clock_id@entry <mailto:clock_id@entry>=0, flags=flags@entry <mailto:flags@entry>=0, req=req@entry <mailto:req@entry>=0x7ffe23126940, rem=rem@entry <mailto:rem@entry>=0x0) at ../sysdeps/unix/sysv/linux/clock_nanosleep.c:78
+ 78 ../sysdeps/unix/sysv/linux/clock_nanosleep.c: No such file or directory.
+ (gdb) PASS: gdb.multi/multi-term-settings.exp: inf1_how=attach: inf2_how=attach: inf2: attach
+ set schedule-multiple on
+ (gdb) PASS: gdb.multi/multi-term-settings.exp: inf1_how=attach: inf2_how=attach: set schedule-multiple on
+ info inferiors
+ Num Description Connection Executable
+ 1 process 60404 1 (extended-remote localhost:2349) build/gdb/testsuite/outputs/gdb.multi/multi-term-settings/multi-term-settings
+ * 2 process 60422 1 (extended-remote localhost:2349) build/gdb/testsuite/outputs/gdb.multi/multi-term-settings/multi-term-settings
+ (gdb) PASS: gdb.multi/multi-term-settings.exp: inf1_how=attach: inf2_how=attach: info inferiors
+ pid=60422, count=46
+ pid=60422, count=47
+ pid=60422, count=48
+ pid=60422, count=49
+ pid=60422, count=50
+ pid=60422, count=51
+ pid=60422, count=52
+ pid=60422, count=53
+ pid=60422, count=54
+ pid=60422, count=55
+ pid=60422, count=56
+ pid=60422, count=57
+ pid=60422, count=58
+ pid=60422, count=59
+ pid=60422, count=60
+ pid=60422, count=61
+ pid=60422, count=62
+ pid=60422, count=63
+ pid=60422, count=64
+ pid=60422, count=65
+ pid=60422, count=66
+ pid=60422, count=67
+ pid=60422, count=68
+ pid=60422, count=69
+ pid=60404, count=54
+ pid=60404, count=55
+ pid=60404, count=56
+ pid=60404, count=57
+ pid=60404, count=58
+ PASS: gdb.multi/multi-term-settings.exp: inf1_how=attach: inf2_how=attach: continue
+ Quit
+ (gdb) FAIL: gdb.multi/multi-term-settings.exp: inf1_how=attach: inf2_how=attach: stop with control-c (SIGINT)
+
+ If you look at the testcase's sources, you'll see that the intention
+ is to resumes the program with "continue", wait to see a few of those
+ "pid=..., count=..." lines, and then interrupt the program with
+ Ctrl-C. But somehow, that resulted in GDB printing "Quit", instead of
+ the Ctrl-C stopping the program with SIGINT.
+
+ Here's what is happening:
+
+ #1 - those "pid=..., count=..." lines we see above weren't actually
+ output by the inferior after it has been continued (see #1).
+ Note that "inf1_how" and "inf2_how" are "attach". What happened
+ is that those "pid=..., count=..." lines were output by the
+ inferiors _before_ they were attached to. We see them at that
+ point instead of earlier, because that's where the testcase
+ reads from the inferiors' spawn_ids.
+
+ #2 - The testcase mistakenly thinks those "pid=..., count=..." lines
+ happened after the continue was processed by GDB, meaning it has
+ waited enough, and so sends the Ctrl-C. GDB hasn't yet passed
+ the terminal to the inferior, so the Ctrl-C results in that
+ Quit.
+
+ The fix here is twofold:
+
+ #1 - flush inferior output right after attaching
+
+ #2 - consume the "Continuing" printed by "continue", indicating the
+ inferior has the terminal. This is the same as done throughout
+ the testsuite to handle this exact problem of sending Ctrl-C too
+ soon.
+
+ gdb/testsuite/ChangeLog:
+ yyyy-mm-dd Pedro Alves <pedro@palves.net <mailto:pedro@palves.net>>
+
+ * gdb.multi/multi-term-settings.exp (create_inferior): Flush
+ inferior output.
+ (coretest): Use $gdb_test_name. After issuing "continue", wait
+ for "Continuing".
+
+ Change-Id: Iba7671dfe1eee6b98d29cfdb05a1b9aa2f9defb9
+
+2021-09-29 Tom de Vries <tdevries@suse.de>
+
+ [gdb/testsuite] Disable vgdb tests if xml not supported
+ I build gdb without xml support using --without-expat, and ran into:
+ ...
+ (gdb) target remote | vgdb --wait=2 --max-invoke-ms=2500 --pid=22032^M
+ Remote debugging using | vgdb --wait=2 --max-invoke-ms=2500 --pid=22032^M
+ relaying data between gdb and process 22032^M
+ warning: Can not parse XML target description; XML support was disabled at \
+ compile time^M
+ ...
+ (gdb) PASS: gdb.base/valgrind-infcall.exp: continue #1
+ p gdb_test_infcall ()^M
+ Remote 'g' packet reply is too long (expected 560 bytes, got 800 bytes): ...^M
+ (gdb) FAIL: gdb.base/valgrind-infcall.exp: p gdb_test_infcall ()
+ ...
+
+ After googling the error message with context valgrind gdbserver, I found
+ indications that the Remote 'g' packet reply error is due to missing xml
+ support.
+
+ And here ( https://www.valgrind.org/docs/manual/manual-core-adv.html ) I
+ found:
+ ...
+ GDB version needed for ARM and PPC32/64.
+
+ You must use a GDB version which is able to read XML target description sent
+ by a gdbserver. This is the standard setup if GDB was configured and built
+ with the "expat" library. If your GDB was not configured with XML support, it
+ will report an error message when using the "target" command. Debugging will
+ not work because GDB will then not be able to fetch the registers from the
+ Valgrind gdbserver.
+ ...
+
+ So I guess I'm running into the same problem for x86_64.
+
+ Fix this by skipping all gdb.base/valgrind-*.exp tests if xml support is not
+ available. Although only the gdb.base/valgrind-infcall*.exp produce fails,
+ the Remote 'g' packet reply error occurs in all tests, so it seems prudent to
+ disable them all.
+
+ Tested on x86_64-linux.
+
+2021-09-29 Tom de Vries <tdevries@suse.de>
+
+ [gdb/testsuite] Fix gdb.python/py-breakpoint.exp with python 2
+ With a gdb build using python 2.7, I run into:
+ ...
+ (gdb) python \
+ gdb.events.breakpoint_modified.connect(lambda bp: print(bp.enabled))^M
+ File "<string>", line 1^M
+ gdb.events.breakpoint_modified.connect(lambda bp: print(bp.enabled))^M
+ ^^M
+ SyntaxError: invalid syntax^M
+ Error while executing Python code.^M
+ (gdb) FAIL: gdb.python/py-breakpoint.exp: test_bkpt_auto_disable: \
+ trap breakpoint_modified event
+ ...
+
+ This is caused by the following:
+ - a lambda function body needs to be an expression
+ - in python 2, print is a statement, while in python 3 it's a function
+ - a function call is an expression, and a statement is not.
+
+ Fix this by defining a function print_bp_enabled:
+ ...
+ def print_bp_enabled (bp):
+ print (bp.enabled)
+ end
+ ...
+ and using that instead.
+
+ Tested on x86_64-linux.
+
+2021-09-29 Tom de Vries <tdevries@suse.de>
+
+ [gdb/testsuite] Fix breakpoint detection in gdb.gdb/python-helper.exp
+ With a gdb configured to be somewhat minimal, while still supporting python:
+ ...
+ $ gdb --configuration
+ This GDB was configured as follows:
+ configure --host=x86_64-pc-linux-gnu --target=x86_64-pc-linux-gnu
+ --with-auto-load-dir=$debugdir:$datadir/auto-load
+ --with-auto-load-safe-path=$debugdir:$datadir/auto-load
+ --without-expat
+ --with-gdb-datadir=$install/share/gdb (relocatable)
+ --with-jit-reader-dir=$install/lib64/gdb (relocatable)
+ --without-libunwind-ia64
+ --without-lzma
+ --without-babeltrace
+ --without-intel-pt
+ --with-mpfr
+ --without-xxhash
+ --with-python=/usr
+ --with-python-libdir=/usr/lib
+ --with-debuginfod
+ --without-guile
+ --disable-source-highlight
+ --with-separate-debug-dir=/usr/lib/debug
+ --with-system-gdbinit=$devel/system-gdbinit
+ ...
+ and using gcc 4.8 to build gdb (causing std::thread not to be used due to
+ PR28318) I ran into:
+ ...
+ (gdb) PASS: gdb.gdb/python-helper.exp: start inner gdb
+ print 1^M
+ ^M
+ Breakpoint 2, value_print () at src/gdb/valprint.c:1174^M
+ 1174 scoped_value_mark free_values;^M
+ (xgdb) FAIL: gdb.gdb/python-helper.exp: hit breakpoint in inner gdb (timeout)
+ ...
+
+ The problem is that the regexp expects "hit Breakpoint $decimal". The "hit"
+ part is missing.
+
+ The "hit" is printed by maybe_print_thread_hit_breakpoint, when
+ show_thread_that_caused_stop returns true:
+ ...
+ int
+ show_thread_that_caused_stop (void)
+ {
+ return highest_thread_num > 1;
+ }
+ ...
+ Apparently, that's not the case.
+
+ Fix this by removing "hit" from the regexp, making the regexp more similar to
+ what is used in say, continue_to_breakpoint.
+
+ Tested on x86_64-linux.
+
+2021-09-29 Andrew Burgess <andrew.burgess@embecosm.com>
+
+ gdb: fix build when libbacktrace and execinfo backtrace are not available
+ In this commit:
+
+ commit abbbd4a3e0ca51132e7fb31a43f896d29894dae0
+ Date: Wed Aug 11 13:24:33 2021 +0100
+
+ gdb: use libbacktrace to create a better backtrace for fatal signals
+
+ The build of GDB was broken iff, the execinfo backtrace API is not
+ available, and, libbacktrace is either disabled, or not usable. In
+ this case you'll see build errors like this:
+
+ CXX bt-utils.o
+ /home/username/src/binutils-gdb/gdb/bt-utils.c: In function 'void gdb_internal_backtrace()':
+ /home/username/src/binutils-gdb/gdb/bt-utils.c:165:5: error: 'gdb_internal_backtrace_1' was not declared in this scope
+ gdb_internal_backtrace_1 ();
+ ^~~~~~~~~~~~~~~~~~~~~~~~
+
+ This commit fixes the issue by guarding the call to
+ gdb_internal_backtrace_1 with '#ifdef GDB_PRINT_INTERNAL_BACKTRACE',
+ which is only defined when one of the backtrace libraries are
+ available.
+
+2021-09-29 Andrew Burgess <andrew.burgess@embecosm.com>
+
+ gdb/doc: use 'standard error stream' instead of 'stderr' in some places
+ With this commit:
+
+ commit 91f2597bd24d171c1337a4629f8237aa47c59082
+ Date: Thu Aug 12 18:24:59 2021 +0100
+
+ gdb: print backtrace for internal error/warning
+
+ I included some references to 'stderr', which, it was pointed out,
+ would be better written as 'standard error stream'. See:
+
+ https://sourceware.org/pipermail/gdb-patches/2021-September/182225.html
+
+ This commit replaces the two instances of 'stderr' that I introduced.
+
+2021-09-29 Andrew Burgess <andrew.burgess@embecosm.com>
+
+ gdb: fix manor -> manner typo in some comments
+ In a recent commit I used 'manor' in some comments rather than
+ 'manner'. This commit fixes those two mistakes.
+
+ I also looked through the gdb/ tree and found one additional instance
+ of this mistake that this commit also fixes.
+
+2021-09-29 Alan Modra <amodra@gmail.com>
+
+ PR27202, readelf -wL doesn't work on ".loc 0"
+ For DWARF revision 4 and earlier, display_debug_lines_decoded
+ populates the file_table array with entries read from .debug_line
+ after the directory table. file_table[0] contains the first entry.
+ DWARF rev 4 line number programs index this entry as file number one.
+ DWARF revision 5 changes .debug_line format quite extensively, and in
+ particular gives file number zero a meaning.
+
+ PR 27202
+ * dwarf.c (display_debug_lines_decoded): Correct indexing used
+ for DWARF5 files.
+
+2021-09-29 Simon Marchi <simon.marchi@polymtl.ca>
+
+ gdb: enable target_async around stop_all_threads call in process_initial_stop_replies
+ The following scenario hangs:
+
+ - maint set target-non-stop on
+ - `gdbserver --attach`
+ - a multi-threaded program
+
+ For example:
+
+ Terminal 1:
+
+ $ gnome-calculator&
+ [1] 495731
+ $ ../gdbserver/gdbserver --once --attach :1234 495731
+ Attached; pid = 495731
+ Listening on port 1234
+
+ Terminal 2:
+
+ $ ./gdb -nx -q --data-directory=data-directory /usr/bin/gnome-calculator -ex "maint set target-non-stop on" -ex "tar rem :1234"
+ Reading symbols from /usr/bin/gnome-calculator...
+ (No debugging symbols found in /usr/bin/gnome-calculator)
+ Remote debugging using :1234
+ * hangs *
+
+ What happens is:
+
+ - The protocol between gdb and gdbserver is in non-stop mode, but the
+ user-visible behavior is all-stop
+ - On connect, gdbserver sends one stop reply for one thread that is
+ stops, the others stay running
+ - In process_initial_stop_replies, gdb calls stop_all_threads to stop
+ these other threads, because we are using the all-stop user-visible
+ mode
+ - stop_all_threads sends a stop request for all the running threads and
+ then waits for resulting events
+ - At this point, the remote target is in target_async(0) mode, which
+ makes stop_all_threads not consider it for events
+ - stop_all_threads loops indefinitely (it does not even block
+ indefinitely, it is in an infinite busy loop) because there are no
+ event sources. wait_one_event returns a TARGET_WAITKIND_NO_RESUMED
+ wait status.
+
+ Fix that by making the remote target async around the stop_all_threads
+ call.
+
+ I haven't implemented it because I'm not sure how to do it, but I think
+ it would be a good idea to have, in stop_all_threads / wait_one /
+ handle_one, an assert to check that if we are expecting one or more
+ event, then there are some targets that are in a state where they can
+ supply some events. Otherwise, we'll necessarily be stuck in this
+ infinite loop, and it's probably due to a bug in GDB. I'm not too sure
+ where to put this or how to express it though. Perhaps in
+ stop_all_threads, here:
+
+ for (int i = 0; i < waits_needed; i++)
+ {
+ wait_one_event event = wait_one ();
+ *here*
+ if (handle_one (event))
+ break;
+ }
+
+ If at that point, the returned event is TARGET_WAITKIND_NO_RESUMED,
+ there's a problem. We expect some event, because we've asked some
+ threads to stop, but all targets are answering that they won't have any
+ events for us. That's a contradiction, and a sign that something has
+ gone wrong. It could perhaps event be:
+
+ gdb_assert (event.ws.kind != TARGET_WAITKIND_NO_RESUMED);
+
+ in handle_one, as the idea is the same in prepare_for_detach.
+
+ A bit more sophisticated would be: we know which targets we are
+ expecting waits from, since we know which threads we have asked to
+ stop. So if any of these targets returns TARGET_WAITKIND_NO_RESUMED,
+ something is fishy.
+
+ Add a test that tests attaching with gdbserver's --attach flag to a
+ multi-threaded program, and then connecting to it. Without the fix, the
+ test reproduces the hang.
+
+ Change-Id: If6f6690a4887ca66693ef1af64791dda4c65f24f
+
+2021-09-29 GDB Administrator <gdbadmin@sourceware.org>
+
+ Automatic date update in version.in
+
+2021-09-29 Simon Marchi <simon.marchi@polymtl.ca>
+
+ gdb: fix darwin-nat build (again)
+ I made a mistake in the previous patch. Adjust the format string to
+ match the arguments.
+
+ Change-Id: I4d45e0e0adb78eb3b5a06ba1a5287155940056ba
+
+2021-09-29 Simon Marchi <simon.marchi@polymtl.ca>
+
+ gdb: fix darwin-nat build
+ There are two errors of this kind:
+
+ CXX darwin-nat.o
+ /Users/smarchi/src/binutils-gdb/gdb/darwin-nat.c:1175:19: error: format specifies type 'unsigned long' but the argument has type 'ULONGEST' (aka 'unsigned long long') [-Werror,-Wformat]
+ ptid.pid (), ptid.tid ());
+ ^~~~~~~~~~~
+
+ Fix them by using ptid_t's to_string method.
+
+ Change-Id: I52087d5f7ee0fc01ac8b3f87d4db0217cb0d7cc7
+
+2021-09-29 Simon Marchi <simon.marchi@polymtl.ca>
+
+ gdb.base/foll-fork.exp: accept "info breakpoints" output in any order
+ The test currently requires the "inf 1" breakpoint to be before the "inf
+ 2" breakpoint. This is not always the case:
+
+ info breakpoints 2
+ Num Type Disp Enb Address What
+ 2 breakpoint keep y <MULTIPLE>
+ 2.1 y 0x0000555555554730 in callee at /home/simark/src/binutils-gdb/gdb/testsuite/gdb.base/foll-fork.c:9 inf 2
+ 2.2 y 0x0000555555554730 in callee at /home/simark/src/binutils-gdb/gdb/testsuite/gdb.base/foll-fork.c:9 inf 1
+ (gdb) FAIL: gdb.base/foll-fork.exp: follow-fork-mode=parent: detach-on-fork=off: cmd=next 2: test_follow_fork: info breakpoints
+
+ Since add_location_to_breakpoint uses only the address as a criterion to
+ sort locations, the order of locations at the same address is not
+ stable: it will depend on the insertion order. Here, the insertion
+ order comes from the order of SALs when creating the breakpoint, which
+ can vary from machine to machine. While it would be more user-friendly
+ to have a more stable order for printed breakpoint locations, it doesn't
+ really matter for this test, and it would be hard to define an order
+ that will be the same everywhere, all the time.
+
+ So, loosen the regexp to accept "inf 1" and "inf 2" in any order.
+
+ Co-Authored-By: Pedro Alves <pedro@palves.net>
+ Change-Id: I5ada2e0c6ad0669e0d161bfb6b767229c0970d16
+
+2021-09-28 Cooper Qu <cooper.qu@linux.alibaba.com>
+
+ RISC-V: Fix wrong version number when arch contains 'p'.
+ When specify a default version for p extension in
+ riscv_supported_std_ext[](elfxx-riscv.c) and assembling with
+ -march=rv32imacp, the c extension's version in attribute will become
+ 0p0, the expectation is 2p0.
+
+ TODO: Remember to add testcase when we have supported standrad p in
+ the future.
+
+ bfd/
+ PR gas/28372
+ * elfxx-riscv.c (riscv_parsing_subset_version): Break if p
+ represent the 'p' extension.
+
+ Change-Id: Ia4e0cf26f3d7d07acaee8cefd86707ecac663a59
+
+2021-09-28 Nelson Chu <nelson.chu@sifive.com>
+
+ RISC-V: Allow to add numbers in the prefixed extension names.
+ We need to allow adding numbers in the prefixed extension names, since
+ the zve<32,64><d,f,x> extensions are included in the forzen rvv v1.0 spec
+ recently. But there are two restrictions as follows,
+
+ * The extension name ends with <number>p is invalid, since this may
+ be confused with extension with <number>.0 version. We report errors
+ for this case.
+
+ Invalid format: [z|h|s|zvm|x][0-9a-z]+[0-9]+p
+
+ * The extension name ends with numbers is valid, but the numbers will
+ be parsed as major version, so try to avoid naming extensions like this.
+
+ bfd/
+ * elfxx-riscv.c (riscv_recognized_prefixed_ext): Renamed from
+ riscv_valid_prefixed_ext/
+ (riscv_parsing_subset_version): The extensions end with <number>p
+ is forbidden, we already report the detailed errors in the
+ riscv_parse_prefixed_ext, so clean the code and unused parameters.
+ (riscv_parse_std_ext): Updated.
+ (riscv_parse_prefixed_ext): Rewrite the parser to allow numbers
+ in the prefixed extension names.
+ gas/
+ * testsuite/gas/riscv/march-fail-invalid-x-01.d: New testcases.
+ * testsuite/gas/riscv/march-fail-invalid-x-02.d: Likewise.
+ * testsuite/gas/riscv/march-fail-invalid-z-01.d: Likewise.
+ * testsuite/gas/riscv/march-fail-invalid-z-02.d: Likewise.
+ * testsuite/gas/riscv/march-fail-invalid.l: Likewise.
+ * testsuite/gas/riscv/march-fail-version-x.d: Removed.
+ * testsuite/gas/riscv/march-fail-version-z.d: Likewise.
+ * testsuite/gas/riscv/march-fail-version.l: Likewise.
+
+2021-09-28 Andrew Burgess <andrew.burgess@embecosm.com>
+
+ gdb: print backtrace for internal error/warning
+ This commit builds on previous work to allow GDB to print a backtrace
+ of itself when GDB encounters an internal-error or internal-warning.
+ This fixes PR gdb/26377.
+
+ There's not many places where we call internal_warning, and I guess in
+ most cases the user would probably continue their debug session. And
+ so, in order to avoid cluttering up the output, by default, printing
+ of a backtrace is off for internal-warnings.
+
+ In contrast, printing of a backtrace is on by default for
+ internal-errors, as I figure that in most cases hitting an
+ internal-error is going to be the end of the debug session.
+
+ Whether a backtrace is printed or not can be controlled with the new
+ settings:
+
+ maintenance set internal-error backtrace on|off
+ maintenance show internal-error backtrace
+
+ maintenance set internal-warning backtrace on|off
+ maintenance show internal-warning backtrace
+
+ Here is an example of what an internal-error now looks like with the
+ backtrace included:
+
+ (gdb) maintenance internal-error blah
+ ../../src.dev-3/gdb/maint.c:82: internal-error: blah
+ A problem internal to GDB has been detected,
+ further debugging may prove unreliable.
+ ----- Backtrace -----
+ 0x5c61ca gdb_internal_backtrace_1
+ ../../src.dev-3/gdb/bt-utils.c:123
+ 0x5c626d _Z22gdb_internal_backtracev
+ ../../src.dev-3/gdb/bt-utils.c:165
+ 0xe33237 internal_vproblem
+ ../../src.dev-3/gdb/utils.c:393
+ 0xe33539 _Z15internal_verrorPKciS0_P13__va_list_tag
+ ../../src.dev-3/gdb/utils.c:470
+ 0x1549652 _Z14internal_errorPKciS0_z
+ ../../src.dev-3/gdbsupport/errors.cc:55
+ 0x9c7982 maintenance_internal_error
+ ../../src.dev-3/gdb/maint.c:82
+ 0x636f57 do_simple_func
+ ../../src.dev-3/gdb/cli/cli-decode.c:97
+ .... snip, lots more backtrace lines ....
+ ---------------------
+ ../../src.dev-3/gdb/maint.c:82: internal-error: blah
+ A problem internal to GDB has been detected,
+ further debugging may prove unreliable.
+ Quit this debugging session? (y or n) y
+
+ This is a bug, please report it. For instructions, see:
+ <https://www.gnu.org/software/gdb/bugs/>.
+
+ ../../src.dev-3/gdb/maint.c:82: internal-error: blah
+ A problem internal to GDB has been detected,
+ further debugging may prove unreliable.
+ Create a core file of GDB? (y or n) n
+
+ My hope is that this backtrace might make it slightly easier to
+ diagnose GDB issues if all that is provided is the console output, I
+ find that we frequently get reports of an assert being hit that is
+ located in pretty generic code (frame.c, value.c, etc) and it is not
+ always obvious how we might have arrived at the assert.
+
+ Bug: https://sourceware.org/bugzilla/show_bug.cgi?id=26377
+
+2021-09-28 Andrew Burgess <andrew.burgess@embecosm.com>
+
+ gdb: use libbacktrace to create a better backtrace for fatal signals
+ GDB recently gained the ability to print a backtrace when a fatal
+ signal is encountered. This backtrace is produced using the backtrace
+ and backtrace_symbols_fd API available in glibc.
+
+ However, in order for this API to actually map addresses to symbol
+ names it is required that the application (GDB) be compiled with
+ -rdynamic, which GDB is not by default.
+
+ As a result, the backtrace produced often looks like this:
+
+ Fatal signal: Bus error
+ ----- Backtrace -----
+ ./gdb/gdb[0x80ec00]
+ ./gdb/gdb[0x80ed56]
+ /lib64/libc.so.6(+0x3c6b0)[0x7fc2ce1936b0]
+ /lib64/libc.so.6(__poll+0x4f)[0x7fc2ce24da5f]
+ ./gdb/gdb[0x15495ba]
+ ./gdb/gdb[0x15489b8]
+ ./gdb/gdb[0x9b794d]
+ ./gdb/gdb[0x9b7a6d]
+ ./gdb/gdb[0x9b943b]
+ ./gdb/gdb[0x9b94a1]
+ ./gdb/gdb[0x4175dd]
+ /lib64/libc.so.6(__libc_start_main+0xf3)[0x7fc2ce17e1a3]
+ ./gdb/gdb[0x4174de]
+ ---------------------
+
+ This is OK if you have access to the exact same build of GDB, you can
+ manually map the addresses back to symbols, however, it is next to
+ useless if all you have is a backtrace copied into a bug report.
+
+ GCC uses libbacktrace for printing a backtrace when it encounters an
+ error. In recent commits I added this library into the binutils-gdb
+ repository, and in this commit I allow this library to be used by
+ GDB. Now (when GDB is compiled with debug information) the backtrace
+ looks like this:
+
+ ----- Backtrace -----
+ 0x80ee08 gdb_internal_backtrace
+ ../../src/gdb/event-top.c:989
+ 0x80ef0b handle_fatal_signal
+ ../../src/gdb/event-top.c:1036
+ 0x7f24539dd6af ???
+ 0x7f2453a97a5f ???
+ 0x154976f gdb_wait_for_event
+ ../../src/gdbsupport/event-loop.cc:613
+ 0x1548b6d _Z16gdb_do_one_eventv
+ ../../src/gdbsupport/event-loop.cc:237
+ 0x9b7b02 start_event_loop
+ ../../src/gdb/main.c:421
+ 0x9b7c22 captured_command_loop
+ ../../src/gdb/main.c:481
+ 0x9b95f0 captured_main
+ ../../src/gdb/main.c:1353
+ 0x9b9656 _Z8gdb_mainP18captured_main_args
+ ../../src/gdb/main.c:1368
+ 0x4175ec main
+ ../../src/gdb/gdb.c:32
+ ---------------------
+
+ Which seems much more useful.
+
+ Use of libbacktrace is optional. If GDB is configured with
+ --disable-libbacktrace then the libbacktrace directory will not be
+ built, and GDB will not try to use this library. In this case GDB
+ would try to use the old backtrace and backtrace_symbols_fd API.
+
+ All of the functions related to writing the backtrace of GDB itself
+ have been moved into the new files gdb/by-utils.{c,h}.
+
+2021-09-28 Andrew Burgess <andrew.burgess@embecosm.com>
+
+ src-release.sh: add libbacktrace to GDB_SUPPORT_DIRS
+ After the previous commit that imported libbacktrace from gcc, this
+ commit updates src-release.sh so that the libbacktrace directory is
+ included in the gdb release tar file.
+
+ ChangeLog:
+
+ * src-release.sh (GDB_SUPPPORT_DIRS): Add libbacktrace.
+
+2021-09-28 Andrew Burgess <andrew.burgess@embecosm.com>
+
+ Copy in libbacktrace from gcc
+ This copies in libbacktrace from the gcc repository as it was in the
+ commit 62e420293a293608f383d9b9c7f2debd666e9fc9. GDB is going to
+ start using this library soon.
+
+ A dependency between GDB and libbacktrace has already been added to
+ the top level Makefile, so, after this commit, when building GDB,
+ libbacktrace will be built first. However, libbacktrace is not yet
+ linked into GDB, or used by GDB in any way.
+
+ It is possible to stop libbacktrace being built by configuring the
+ tree with --disable-libbacktrace.
+
+ This commit does NOT update src-release.sh, that will be done in the
+ next commit, this commit ONLY imports libbacktrace from gcc. This
+ means that if you try to make a release of GDB from exactly this
+ commit then the release tar file will not include libbacktrace.
+ However, as libbacktrace is an optional dependency this is fine.
+
+2021-09-28 Andrew Burgess <andrew.burgess@embecosm.com>
+
+ gdb: Add a dependency between gdb and libbacktrace
+ GDB is going to start using libbacktrace, so add a build dependency.
+
+ ChangeLog:
+
+ * Makefile.def: Add all-gdb dependency on all-libbacktrace.
+ * Makefile.in: Regenerate.
+
+2021-09-28 Andrew Burgess <andrew.burgess@embecosm.com>
+
+ top-level configure: setup target_configdirs based on repository
+ The top-level configure script is shared between the gcc repository
+ and the binutils-gdb repository.
+
+ The target_configdirs variable in the configure.ac script, defines
+ sub-directories that contain components that should be built for the
+ target using the target tools.
+
+ Some components, e.g. zlib, are built as both host and target
+ libraries.
+
+ This causes problems for binutils-gdb. If we run 'make all' in the
+ binutils-gdb repository we end up trying to build a target version of
+ the zlib library, which requires the target compiler be available.
+ Often the target compiler isn't immediately available, and so the
+ build fails.
+
+ The problem with zlib impacted a previous attempt to synchronise the
+ top-level configure scripts from gcc to binutils-gdb, see this thread:
+
+ https://sourceware.org/pipermail/binutils/2019-May/107094.html
+
+ And I'm in the process of importing libbacktrace in to binutils-gdb,
+ which is also a host and target library, and triggers the same issues.
+
+ I believe that for binutils-gdb, at least at the moment, there are no
+ target libraries that we need to build.
+
+ In the configure script we build three lists of things we want to
+ build, $configdirs, $build_configdirs, and $target_configdirs, we also
+ build two lists of things we don't want to build, $skipdirs and
+ $noconfigdirs. We then remove anything that is in the lists of things
+ not to build, from the list of things that should be built.
+
+ My proposal is to add everything in target_configdirs into skipdirs,
+ if the source tree doesn't contain a gcc/ sub-directory. The result
+ is that for binutils-gdb no target tools or libraries will be built,
+ while for the gcc repository, nothing should change.
+
+ If a user builds a unified source tree, then the target tools and
+ libraries should still be built as the gcc/ directory will be present.
+
+ I've tested a build of gcc on x86-64, and the same set of target
+ libraries still seem to get built. On binutils-gdb this change
+ resolves the issues with 'make all'.
+
+ ChangeLog:
+
+ * configure: Regenerate.
+ * configure.ac (skipdirs): Add the contents of target_configdirs if
+ we are not building gcc.
+
+2021-09-28 Gleb Fotengauer-Malinovskiy <glebfm@altlinux.org>
+
+ PR28391, strip/objcopy --preserve-dates *.a: cannot set time
+ After commit 985e0264516 copy_archive function began to pass invalid
+ values to the utimensat(2) function when it tries to preserve
+ timestamps in ar archives. This happens because the bfd_stat_arch_elt
+ implementation for ar archives fills only the st_mtim.tv_sec part of
+ the st_mtim timespec structure, but leaves the st_mtim.tv_nsec part
+ and the whole st_atim timespec untouched leaving them uninitialized
+
+ PR 28391
+ * ar.c (extract_file): Clear buf for preserve_dates.
+ * objcopy.c (copy_archive): Likewise.
+
+2021-09-28 Mike Frysinger <vapier@gentoo.org>
+
+ sim: drop weak func attrs on module inits
+ When I first wrote this, I was thinking we'd scan all source files
+ that existed and generate a complete init list. That means for any
+ particular build, we'd probably have a few functions that didn't
+ exist, so weak attributes was necessary. What I ended up scanning
+ though was only the source files that went into a particular build.
+
+ There was another concern too: a source file might be included, but
+ the build settings would cause all of its contents to be skipped
+ (via CPP defines). So scanning via naive grep would pick up names
+ not actually available. A check of the source tree shows that we
+ never do this, and it's pretty easy to institute a policy that we
+ don't start (by at the very least including a stub init func).
+
+ The use of weak symbols ends up causing a problem in practice: for
+ a few modules (like profiling), nothing else pulls it in, so the
+ linker omits it entirely, which leads to the profiling module never
+ being available. So drop the weak markings since we know all these
+ funcs will be available.
+
+2021-09-28 Cui,Lili <lili.cui@intel.com>
+
+ x86: Print {bad} on invalid broadcast in OP_E_memory
+ Don't print broadcast for scalar_mode, and print {bad} for invalid broadcast.
+
+ gas/
+
+ PR binutils/28381
+ * testsuite/gas/i386/bad-bcast.s: Add a new testcase.
+ * testsuite/gas/i386/bad-bcast.d: Likewise.
+ * testsuite/gas/i386/bad-bcast-intel.d: New.
+
+ opcodes/
+
+ PR binutils/28381
+ * i386-dis.c (static struct): Add no_broadcast.
+ (OP_E_memory): Mark invalid broadcast with no_broadcast=1 and Print "{bad}"for it.
+ (intel_operand_size): mark invalid broadcast with no_broadcast=1.
+ (OP_XMM): Mark scalar_mode with no_broadcast=1.
+
+2021-09-28 Simon Marchi <simon.marchi@polymtl.ca>
+
+ gdb: use intrusive_list for linux-nat lwp_list
+ Replace the manually maintained linked list of lwp_info objects with
+ intrusive_list. Replace the ALL_LWPS macro with all_lwps, which returns
+ a range. Add all_lwps_safe as well, for use in iterate_over_lwps, which
+ currently iterates in a safe manner.
+
+ Change-Id: I355313502510acc0103f5eaf2fbde80897d6376c
+
+2021-09-28 Simon Marchi <simon.marchi@polymtl.ca>
+
+ gdb: add destructor to lwp_info
+ Replace the lwp_free function with a destructor. Make lwp_info
+ non-copyable, since there is now a destructor (we wouldn't want an
+ lwp_info object getting copied and this->arch_private getting deleted
+ twice).
+
+ Change-Id: I09fcbe967e362566d3a06fed2abca2a9955570fa
+
+2021-09-28 Simon Marchi <simon.marchi@polymtl.ca>
+
+ gdb: make lwp_info non-POD
+ Initialize all fields in the class declaration directly. This opens the
+ door to using intrusive_list, done in the following patch.
+
+ Change-Id: I38bb27410cd9ebf511d310bb86fe2ea1872c3b05
+
+2021-09-28 GDB Administrator <gdbadmin@sourceware.org>
+
+ Automatic date update in version.in
+
+2021-09-27 Simon Marchi <simon.marchi@efficios.com>
+
+ gdb: don't share aspace/pspace on fork with "detach-on-fork on" and "follow-fork-mode child"
+ We found that when handling forks, two inferiors can unexpectedly share
+ their program space and address space. To reproduce:
+
+ 1. Using a test program that forks...
+ 2. "set follow-fork-mode child"
+ 3. "set detach-on-fork on" (the default)
+ 4. run to a breakpoint somewhere after the fork
+
+ Step 4 should have created a new inferior:
+
+ (gdb) info inferiors
+ Num Description Connection Executable
+ 1 <null> /home/smarchi/build/wt/amd/gdb/fork
+ * 2 process 251425 1 (native) /home/smarchi/build/wt/amd/gdb/fork
+
+ By inspecting the state of GDB, we can see that the two inferiors now
+ share one program space and one address space:
+
+ Inferior 1:
+
+ (top-gdb) p inferior_list.m_front.num
+ $2 = 1
+ (top-gdb) p inferior_list.m_front.aspace
+ $3 = (struct address_space *) 0x5595e2520400
+ (top-gdb) p inferior_list.m_front.pspace
+ $4 = (struct program_space *) 0x5595e2520440
+
+ Inferior 2:
+
+ (top-gdb) p inferior_list.m_front.next.num
+ $5 = 2
+ (top-gdb) p inferior_list.m_front.next.aspace
+ $6 = (struct address_space *) 0x5595e2520400
+ (top-gdb) p inferior_list.m_front.next.pspace
+ $7 = (struct program_space *) 0x5595e2520440
+
+ You can then run inferior 1 again and the two inferiors will still
+ erroneously share their spaces, but already at this point this is wrong.
+
+ The cause of the bad {a,p}space sharing is in follow_fork_inferior.
+ When following the child and detaching from the parent, we just re-use
+ the parent's spaces, rather than cloning them. When we switch back to
+ inferior 1 and run again, we find ourselves with two unrelated inferiors
+ sharing spaces.
+
+ Fix that by creating new spaces for the parent after having moved them
+ to the child. My initial implementation created new spaces for the
+ child instead. Doing this breaks doing "next" over fork(). When "next"
+ start, we record the symtab of the starting location. When the program
+ stops, we compare that symtab with the symtab the program has stopped
+ at. If the symtab or the line number has changed, we conclude the
+ "next" is done. If we create a new program space for the child and copy
+ the parent's program space to it with clone_program_space, it creates
+ new symtabs for the child as well. When the child stop, but still on
+ the fork() line, GDB thinks the "next" is done because the symtab
+ pointers no longer match. In reality they are two symtab instances that
+ represent the same file. But moving the spaces to the child and
+ creating new spaces for the parent, we avoid this problem.
+
+ Note that the problem described above happens today with "detach-on-fork
+ off" and "follow-fork-mode child", because we create new spaces for the
+ child. This will have to be addressed later.
+
+ Test-wise, improve gdb.base/foll-fork.exp to set a breakpoint that is
+ expected to have a location in each inferiors. Without the fix, when
+ the two inferiors erroneously share a program space, GDB reports a
+ single location.
+
+ Change-Id: Ifea76e14f87b9f7321fc3a766217061190e71c6e
+
+2021-09-27 Simon Marchi <simon.marchi@efficios.com>
+
+ gdb.base/foll-fork.exp: use foreach_with_prefix to handle prefixes
+ No behavior change in the test expected, other than in the test names.
+
+ Change-Id: I111137483858ab0f23138439f2930009779a2b3d
+
+2021-09-27 Simon Marchi <simon.marchi@efficios.com>
+
+ gdb.base/foll-fork.exp: rename variables
+ Rename the variables / parameters used to match the corresponding GDB
+ setting name, I find that easier to follow.
+
+ Change-Id: Idcbddbbb369279fcf1e808b11a8c478f21b2a946
+
+2021-09-27 Simon Marchi <simon.marchi@efficios.com>
+
+ gdb.base/foll-fork.exp: refactor to restart GDB between each portion of the test
+ This test is difficult to follow and modify because the state of GDB is
+ preserved some tests. Add a setup proc, which starts a new GDB and runs
+ to main, and use it in all test procs. Use proc_with_prefix to avoid
+ duplicates.
+
+ The check_fork_catchpoints proc also seems used to check for follow-fork
+ support by checking if catchpoints are supported. If they are not, it
+ uses "return -code return", which makes its caller return. I find this
+ unnecessary complex, versus just returning a boolean. Modify it to do
+ so.
+
+ Change-Id: I23e62b204286c5e9c5c86d2727f7d33fb126ed08
+
+2021-09-27 Simon Marchi <simon.marchi@efficios.com>
+
+ gdb.base/foll-fork.exp: remove gating based on target triplet
+ It looks like this test has some code to check at runtime the support of
+ fork handling of the target (see check_fork_catchpoints). So, it seems
+ to me that the check based on target triplet at the beginning of the
+ test is not needed. This kind of gating is generally not desirable,
+ because we wouldn't think of updating it when adding fork support to a
+ target. For example, FreeBSD supports fork, but it wasn't listed here.
+
+ Change-Id: I6b55f2298edae6b37c3681fb8633d8ea1b5aabee
+
+2021-09-27 Simon Marchi <simon.marchi@efficios.com>
+
+ gdb.base/foll-fork.exp: remove DUPLICATEs
+ Remove DUPLICATEs, and and at the same time replace two uses of
+ gdb_test_multiple with gdb_test. I don't think using gdb_test_multiple
+ is necessary here.
+
+ Change-Id: I8dcf097c3364e92d4f0e11f0c0f05dbb88e86742
+
+2021-09-27 Nick Alcock <nick.alcock@oracle.com>
+
+ libctf, lookup: fix bounds of pptrtab lookup
+ An off-by-one bug in the check for pptrtab lookup meant that we could
+ access the pptrtab past its bounds (*well* past its bounds),
+ particularly if we called ctf_lookup_by_name in a child dict with "*foo"
+ where "foo" is a type that exists in the parent but not the child and no
+ previous lookups by name have been carried out. (Note that "*foo" is
+ not even a valid thing to call ctf_lookup_by_name with: foo * is.
+ Nonetheless, users sometimes do call ctf_lookup_by_name with invalid
+ content, and it should return ECTF_NOTYPE, not crash.)
+
+ ctf_pptrtab_len, as its name suggests (and as other tests of it in
+ ctf-lookup.c confirm), is one higher than the maximum valid permissible
+ index, so the comparison is wrong.
+
+ (Test added, which should fail pretty reliably in the presence of this
+ bug on any machine with 4KiB pages.)
+
+ libctf/ChangeLog
+ 2021-09-27 Nick Alcock <nick.alcock@oracle.com>
+
+ * ctf-lookup.c (ctf_lookup_by_name_internal): Fix pptrtab bounds.
+ * testsuite/libctf-writable/pptrtab-writable-page-deep-lookup.*:
+ New test.
+
+2021-09-27 Nick Alcock <nick.alcock@oracle.com>
+
+ libctf, testsuite: fix various warnings in tests
+ These warnings are all off by default, but if they do fire you get
+ spurious ERRORs when running make check-libctf.
+
+ libctf/ChangeLog
+ 2021-09-27 Nick Alcock <nick.alcock@oracle.com>
+
+ * testsuite/libctf-lookup/enum-symbol.c: Remove unused label.
+ * testsuite/libctf-lookup/conflicting-type-syms.c: Remove unused
+ variables.
+ * testsuite/libctf-regression/pptrtab.c: Likewise.
+ * testsuite/libctf-regression/type-add-unnamed-struct.c: Likewise.
+ * testsuite/libctf-writable/pptrtab.c: Likewise.
+ * testsuite/libctf-writable/reserialize-strtab-corruption.c:
+ Likewise.
+ * testsuite/libctf-regression/nonstatic-var-section-ld-r.c: Fix
+ format string.
+ * testsuite/libctf-regression/nonstatic-var-section-ld.c:
+ Likewise.
+ * testsuite/libctf-regression/nonstatic-var-section-ld.lk: Adjust.
+ * testsuite/libctf-writable/symtypetab-nonlinker-writeout.c: Fix
+ initializer.
+
+2021-09-27 Nick Alcock <nick.alcock@oracle.com>
+
+ libctf: fix handling of CTF symtypetab sections emitted by older GCC
+ Older (pre-upstreaming) GCC emits a function symtypetab section of a
+ format never read by any extant libctf. We can detect such CTF dicts by
+ the lack of the CTF_F_NEWFUNCINFO flag in their header, and we do so
+ when reading in the symtypetab section -- but if the set of symbols with
+ types is sufficiently sparse, even an older GCC will emit a function
+ index section.
+
+ In NEWFUNCINFO-capable compilers, this section will always be the exact
+ same length as the corresponding function section (each is an array of
+ uint32_t, associated 1:1 with each other). But this is not true for the
+ older compiler, for which the sections are different lengths. We check
+ to see if the function symtypetab section and its index are the same
+ length, but we fail to skip this check when this is not a NEWFUNCINFO
+ dict, and emit a spurious corruption error for a CTF dict we could
+ have perfectly well opened and used.
+
+ Fix trivial: check the flag (and fix the terrible grammar of the error
+ message at the same time).
+
+ libctf/ChangeLog
+ 2021-09-27 Nick Alcock <nick.alcock@oracle.com>
+
+ * ctf-open.c (ctf_bufopen_internal): Don't complain about corrupt
+ function index symtypetab sections if this is an old-format
+ function symtypetab section (which should be ignored in any case).
+ Fix bad grammar.
+
+2021-09-27 Nick Alcock <nick.alcock@oracle.com>
+
+ configure: regenerate in all projects that use libtool.m4
+ (including sim/, which has no changelog.)
+
+ bfd/ChangeLog
+ 2021-09-27 Nick Alcock <nick.alcock@oracle.com>
+
+ * configure: Regenerate.
+
+ binutils/ChangeLog
+ 2021-09-27 Nick Alcock <nick.alcock@oracle.com>
+
+ * configure: Regenerate.
+
+ gas/ChangeLog
+ 2021-09-27 Nick Alcock <nick.alcock@oracle.com>
+
+ * configure: Regenerate.
+
+ gprof/ChangeLog
+ 2021-09-27 Nick Alcock <nick.alcock@oracle.com>
+
+ * configure: Regenerate.
+
+ ld/ChangeLog
+ 2021-09-27 Nick Alcock <nick.alcock@oracle.com>
+
+ * configure: Regenerate.
+
+ libctf/ChangeLog
+ 2021-09-27 Nick Alcock <nick.alcock@oracle.com>
+
+ * configure: Regenerate.
+ * Makefile.in: Regenerate.
+
+ opcodes/ChangeLog
+ 2021-09-27 Nick Alcock <nick.alcock@oracle.com>
+
+ * configure: Regenerate.
+
+ zlib/ChangeLog
+ 2021-09-27 Nick Alcock <nick.alcock@oracle.com>
+
+ * configure: Regenerate.
+
+2021-09-27 Nick Alcock <nick.alcock@oracle.com>
+
+ libctf: try several possibilities for linker versioning flags
+ Checking for linker versioning by just grepping ld --help output for
+ mentions of --version-script is inadequate now that Solaris 11.4
+ implements a --version-script with different semantics. Try linking a
+ test program with a small wildcard-using version script with each
+ supported set of flags in turn, to make sure that linker versioning is
+ not only advertised but actually works.
+
+ The Solaris "GNU-compatible" linker versioning is not quite
+ GNU-compatible enough, but we can work around the differences by
+ generating a new version script that removes the comments from the
+ original (Solaris ld requires #-style comments), and making another
+ version script for libctf-nonbfd in particular which doesn't mention any
+ of the symbols that appear in libctf.la, to avoid Solaris ld introducing
+ corresponding new NOTYPE symbols to match the version script.
+
+ libctf/ChangeLog
+ 2021-09-27 Nick Alcock <nick.alcock@oracle.com>
+
+ PR libctf/27967
+ * configure.ac (VERSION_FLAGS): Replace with...
+ (ac_cv_libctf_version_script): ... this multiple test.
+ (VERSION_FLAGS_NOBFD): Substitute this too.
+ * Makefile.am (libctf_nobfd_la_LDFLAGS): Use it. Split out...
+ (libctf_ldflags_nover): ... non-versioning flags here.
+ (libctf_la_LDFLAGS): Use it.
+ * libctf.ver: Give every symbol not in libctf-nobfd a comment on
+ the same line noting as much.
+
+2021-09-27 Nick Alcock <nick.alcock@oracle.com>
+
+ libtool.m4: fix nm BSD flag detection
+ Libtool needs to get BSD-format (or MS-format) output out of the system
+ nm, so that it can scan generated object files for symbol names for
+ -export-symbols-regex support. Some nms need specific flags to turn on
+ BSD-formatted output, so libtool checks for this in its AC_PATH_NM.
+ Unfortunately the code to do this has a pair of interlocking flaws:
+
+ - it runs the test by doing an nm of /dev/null. Some platforms
+ reasonably refuse to do an nm on a device file, but before now this
+ has only been worked around by assuming that the error message has a
+ specific textual form emitted by Tru64 nm, and that getting this
+ error means this is Tru64 nm and that nm -B would work to produce
+ BSD-format output, even though the test never actually got anything
+ but an error message out of nm -B. This is fixable by nm'ing *nm
+ itself* (since we necessarily have a path to it).
+
+ - the test is entirely skipped if NM is set in the environment, on the
+ grounds that the user has overridden the test: but the user cannot
+ reasonably be expected to know that libtool wants not only nm but
+ also flags forcing BSD-format output. Worse yet, one such "user" is
+ the top-level Cygnus configure script, which neither tests for
+ nor specifies any BSD-format flags. So platforms needing BSD-format
+ flags always fail to set them when run in a Cygnus tree, breaking
+ -export-symbols-regex on such platforms. Libtool also needs to
+ augment $LD on some platforms, but this is done unconditionally,
+ augmenting whatever the user specified: the nm check should do the
+ same.
+
+ One wrinkle: if the user has overridden $NM, a path might have been
+ provided: so we use the user-specified path if there was one, and
+ otherwise do the path search as usual. (If the nm specified doesn't
+ work, this might lead to a few extra pointless path searches -- but
+ the test is going to fail anyway, so that's not a problem.)
+
+ (Tested with NM unset, and set to nm, /usr/bin/nm, my-nm where my-nm is a
+ symlink to /usr/bin/nm on the PATH, and /not-on-the-path/my-nm where
+ *that* is a symlink to /usr/bin/nm.)
+
+ ChangeLog
+ 2021-09-27 Nick Alcock <nick.alcock@oracle.com>
+
+ PR libctf/27967
+ * libtool.m4 (LT_PATH_NM): Try BSDization flags with a user-provided
+ NM, if there is one. Run nm on itself, not on /dev/null, to avoid
+ errors from nms that refuse to work on non-regular files. Remove
+ other workarounds for this problem. Strip out blank lines from the
+ nm output.
+
+2021-09-27 Nick Alcock <nick.alcock@oracle.com>
+
+ libtool.m4: augment symcode for Solaris 11
+ This reports common symbols like GNU nm, via a type code of 'C'.
+
+ ChangeLog
+ 2021-09-27 Nick Alcock <nick.alcock@oracle.com>
+
+ PR libctf/27967
+ * libtool.m4 (lt_cv_sys_global_symbol_pipe): Augment symcode for
+ Solaris 11.
+
+2021-09-27 Nick Alcock <nick.alcock@oracle.com>
+
+ libctf: link against libiberty before linking in libbfd or libctf-nobfd
+ This ensures that the CTF_LIBADD, which always contains at least this
+ when doing a shared link:
+
+ -L`pwd`/../libiberty/pic -liberty
+
+ appears in the link line before any requirements pulled in by libbfd.la,
+ which include -liberty but because it is install-time do not include the
+ -L`pwd`/../libiberty/pic portion (in an indirect dep like this, the path
+ comes from the libbfd.la file, and is an install path). libiberty also
+ appears after libbfd in the link line by virtue of libctf-nobfd.la,
+ because libctf-nobfd has to follow libbfd in the link line, and that
+ needs symbols from libiberty too.
+
+ Without this, an installed liberty might well be pulled in by libbfd,
+ and if --enable-install-libiberty is not specified this libiberty might
+ be completely incompatible with what is being installed and break either
+ or boht of libbfd and libctf. (The specific problem observed here is
+ that bsearch_r was not present, but other problems might easily be
+ observed in future too.)
+
+ Because ld links against libctf, this has a tendency to break the system
+ linker at install time too, if installing with --prefix=/usr. That's
+ quite unpleasant to recover from.
+
+ libctf/ChangeLog
+ 2021-09-27 Nick Alcock <nick.alcock@oracle.com>
+
+ PR libctf/27360
+ * Makefile.am (libctf_la_LIBADD): Link against libiberty
+ before pulling in libbfd.la or pulling in libctf-nobfd.la.
+ * Makefile.in: Regenerate.
+
+2021-09-27 Tom de Vries <tdevries@suse.de>
+
+ [gdb/build] Fix build with g++-4.8
+ When building g++-4.8, we run into:
+ ...
+ src/gdb/dwarf2/read.c:919:5: error: multiple fields in union \
+ 'partial_die_info::<anonymous union>' initialized
+ ...
+
+ This is due to:
+ ...
+ union
+ {
+ struct
+ {
+ CORE_ADDR lowpc = 0;
+ CORE_ADDR highpc = 0;
+ };
+ ULONGEST ranges_offset;
+ };
+ ...
+
+ The error looks incorrect, given that only one union member is initialized,
+ and does not reproduce with newer g++.
+
+ Nevertheless, work around this by moving the initialization to a constructor.
+
+ [ I considered just removing the initialization, with the idea that access
+ should be guarded by has_pc_info, but I ran into one failure in the testsuite,
+ for gdb.base/check-psymtab.exp due to add_partial_symbol using lowpc without
+ checking has_pc_info. ]
+
+ Tested on x86_64-linux.
+
+2021-09-27 Andrew Burgess <andrew.burgess@embecosm.com>
+
+ gdb: add setting to disable reading source code files
+ In some situations it is possible that a user might not want GDB to
+ try and access source code files, for example, the source code might
+ be stored on a slow to access network file system.
+
+ It is almost certainly possible that using some combination of 'set
+ directories' and/or 'set substitute-path' a user can trick GDB into
+ being unable to find the source files, but this feels like a rather
+ crude way to solve the problem.
+
+ In this commit a new option is add that stops GDB from opening and
+ reading the source files. A user can run with source code reading
+ disabled if this is required, then re-enable later if they decide
+ that they now want to view the source code.
+
+2021-09-27 Andrew Burgess <andrew.burgess@embecosm.com>
+
+ gdb: remove duplicate cmd_list_element declarations
+ For some reason we have two locations where cmd_list_elements are
+ declared, cli/cli-cmds.h and gdbcmd.h. Worse still there is
+ duplication between these two locations.
+
+ In this commit I have moved all of the cmd_list_element declarations
+ from gdbcmd.h into cli/cli-cmds.h and removed the duplicates.
+
+ There should be no user visible changes after this commit.
+
+2021-09-27 Andrew Burgess <andrew.burgess@embecosm.com>
+
+ gdb: prevent an assertion when computing the frame_id for an inline frame
+ I ran into this assertion while GDB was trying to unwind the stack:
+
+ gdb/inline-frame.c:173: internal-error: void inline_frame_this_id(frame_info*, void**, frame_id*): Assertion `frame_id_p (*this_id)' failed.
+
+ That is, when building the frame_id for an inline frame, GDB asks for
+ the frame_id of the previous frame. Unfortunately, no valid frame_id
+ was returned for the previous frame, and so the assertion triggers.
+
+ What is happening is this, I had a stack that looked something like
+ this (the arrows '->' point from caller to callee):
+
+ normal_frame -> inline_frame
+
+ However, for whatever reason (e.g. broken debug information, or
+ corrupted stack contents in the inferior), when GDB tries to unwind
+ "normal_frame", it ends up getting back effectively the same frame,
+ thus the call stack looks like this to GDB:
+
+ .-> normal_frame -> inline_frame
+ | |
+ '-----'
+
+ Given such a situation we would expect GDB to terminate the stack with
+ an error like this:
+
+ Backtrace stopped: previous frame identical to this frame (corrupt stack?)
+
+ However, the inline_frame causes a problem, and here's why:
+
+ When unwinding we start from the sentinel frame and call
+ get_prev_frame. We eventually end up in get_prev_frame_if_no_cycle,
+ in here we create a raw frame, and as this is frame #0 we immediately
+ return.
+
+ However, eventually we will try to unwind the stack further. When we
+ do this we inevitably needing to know the frame_id for frame #0, and
+ so, eventually, we end up in compute_frame_id.
+
+ In compute_frame_id we first find the right unwinder for this frame,
+ in our case (i.e. for inline_frame) the $pc is within the function
+ normal_frame, but also within a block associated with the inlined
+ function inline_frame, as such the inline frame unwinder claims this
+ frame.
+
+ Back in compute_frame_id we next compute the frame_id, for our
+ inline_frame this means a call to inline_frame_this_id.
+
+ The ID of an inline frame is based on the id of the previous frame, so
+ from inline_frame_this_id we call get_prev_frame_always, this
+ eventually calls get_prev_frame_if_no_cycle again, which creates
+ another raw frame and calls compute_frame_id (for frames other than
+ frame 0 we immediately compute the frame_id).
+
+ In compute_frame_id we again identify the correct unwinder for this
+ frame. Our $pc is unchanged, however, the fact that the next frame is
+ of type INLINE_FRAME prevents the inline frame unwinder from claiming
+ this frame again, and so, the standard DWARF frame unwinder claims
+ normal_frame.
+
+ We return to compute_frame_id and call the standard DWARF function to
+ build the frame_id for normal_frame.
+
+ With the frame_id of normal_frame figured out we return to
+ compute_frame_id, and then to get_prev_frame_if_no_cycle, where we add
+ the ID for normal_frame into the frame_id cache, and return the frame
+ back to inline_frame_this_id.
+
+ From inline_frame_this_id we build a frame_id for inline_frame and
+ return to compute_frame_id, and then to get_prev_frame_if_no_cycle,
+ which adds the frame_id for inline_frame into the frame_id cache.
+
+ So far, so good.
+
+ However, as we are trying to unwind the complete stack, we eventually
+ ask for the previous frame of normal_frame, remember, at this point
+ GDB doesn't know the stack is corrupted (with a cycle), GDB still
+ needs to figure that out.
+
+ So, we eventually end up in get_prev_frame_if_no_cycle where we create
+ a raw frame and call compute_frame_id, remember, this is for the frame
+ before normal_frame.
+
+ The first task for compute_frame_id is to find the unwinder for this
+ frame, so all of the frame sniffers are tried in order, this includes
+ the inline frame sniffer.
+
+ The inline frame sniffer asks for the $pc, this request is sent up the
+ stack to normal_frame, which, due to its cyclic behaviour, tells GDB
+ that the $pc in the previous frame was the same as the $pc in
+ normal_frame.
+
+ GDB spots that this $pc corresponds to both the function normal_frame
+ and also the inline function inline_frame. As the next frame is not
+ an INLINE_FRAME then GDB figures that we have not yet built a frame to
+ cover inline_frame, and so the inline sniffer claims this new frame.
+ Our stack is now looking like this:
+
+ inline_frame -> normal_frame -> inline_frame
+
+ But, we have not yet computed the frame id for the outer most (on the
+ left) inline_frame. After the frame sniffer has claimed the inline
+ frame GDB returns to compute_frame_id and calls inline_frame_this_id.
+
+ In here GDB calls get_prev_frame_always, which eventually ends up
+ in get_prev_frame_if_no_cycle again, where we create a raw frame and
+ call compute_frame_id.
+
+ Just like before, compute_frame_id tries to find an unwinder for this
+ new frame, it sees that the $pc is within both normal_frame and
+ inline_frame, but the next frame is, again, an INLINE_FRAME, so, just
+ like before the standard DWARF unwinder claims this frame. Back in
+ compute_frame_id we again call the standard DWARF function to build
+ the frame_id for this new copy of normal_frame.
+
+ At this point the stack looks like this:
+
+ normal_frame -> inline_frame -> normal_frame -> inline_frame
+
+ After compute_frame_id we return to get_prev_frame_if_no_cycle, where
+ we try to add the frame_id for the new normal_frame into the frame_id
+ cache, however, unlike before, we fail to add this frame_id as it is
+ a duplicate of the previous normal_frame frame_id. Having found a
+ duplicate get_prev_frame_if_no_cycle unlinks the new frame from the
+ stack, and returns nullptr, the stack now looks like this:
+
+ inline_frame -> normal_frame -> inline_frame
+
+ The nullptr result from get_prev_frame_if_no_cycle is fed back to
+ inline_frame_this_id, which forwards this to get_frame_id, which
+ immediately returns null_frame_id. As null_frame_id is not considered
+ a valid frame_id, this is what triggers the assertion.
+
+ In summary then:
+
+ - inline_frame_this_id currently assumes that as the inline frame
+ exists, we will always get a valid frame back from
+ get_prev_frame_always,
+
+ - get_prev_frame_if_no_cycle currently assumes that it is safe to
+ return nullptr when it sees a cycle.
+
+ Notice that in frame.c:compute_frame_id, this code:
+
+ fi->this_id.value = outer_frame_id;
+ fi->unwind->this_id (fi, &fi->prologue_cache, &fi->this_id.value);
+ gdb_assert (frame_id_p (fi->this_id.value));
+
+ The assertion makes it clear that the this_id function must always
+ return a valid frame_id (e.g. null_frame_id is not a valid return
+ value), and similarly in inline_frame.c:inline_frame_this_id this
+ code:
+
+ *this_id = get_frame_id (get_prev_frame_always (this_frame));
+ /* snip comment */
+ gdb_assert (frame_id_p (*this_id));
+
+ Makes it clear that every inline frame expects to be able to get a
+ previous frame, which will have a valid frame_id.
+
+ As I have discussed above, these assumptions don't currently hold in
+ all cases.
+
+ One possibility would be to move the call to get_prev_frame_always
+ forward from inline_frame_this_id to inline_frame_sniffer, however,
+ this falls foul of (in frame.c:frame_cleanup_after_sniffer) this
+ assertion:
+
+ /* No sniffer should extend the frame chain; sniff based on what is
+ already certain. */
+ gdb_assert (!frame->prev_p);
+
+ This assert prohibits any sniffer from trying to get the previous
+ frame, as getting the previous frame is likely to depend on the next
+ frame, I can understand why this assertion is a good thing, and I'm in
+ no rush to alter this rule.
+
+ The solution proposed here takes onboard feedback from both Pedro, and
+ Simon (see the links below). The get_prev_frame_if_no_cycle function
+ is renamed to get_prev_frame_maybe_check_cycle, and will now not do
+ cycle detection for inline frames, even when we spot a duplicate frame
+ it is still returned. This is fine, as, if the normal frame has a
+ duplicate frame-id then the inline frame will also have a duplicate
+ frame-id. And so, when we reject the inline frame, the duplicate
+ normal frame, which is previous to the inline frame, will also be
+ rejected.
+
+ In inline-frame.c the call to get_prev_frame_always is no longer
+ nested inside the call to get_frame_id. There are reasons why
+ get_prev_frame_always can return nullptr, for example, if there is a
+ memory error while trying to get the previous frame, if this should
+ happen then we now give a more informative error message.
+
+ Historical Links:
+
+ Patch v2: https://sourceware.org/pipermail/gdb-patches/2021-June/180208.html
+ Feedback: https://sourceware.org/pipermail/gdb-patches/2021-July/180651.html
+ https://sourceware.org/pipermail/gdb-patches/2021-July/180663.html
+
+ Patch v3: https://sourceware.org/pipermail/gdb-patches/2021-July/181029.html
+ Feedback: https://sourceware.org/pipermail/gdb-patches/2021-July/181035.html
+
+ Additional input: https://sourceware.org/pipermail/gdb-patches/2021-September/182040.html
+
+2021-09-27 Tom de Vries <tdevries@suse.de>
+
+ [gdb/testsuite] Fix gdb.base/dcache-flush.exp
+ When running test-case gdb.base/dcache-flush.exp on ubuntu 18.04.5, I run into:
+ ...
+ (gdb) PASS: gdb.base/dcache-flush.exp: p var2
+ info dcache^M
+ Dcache 4096 lines of 64 bytes each.^M
+ Contains data for Thread 0x7ffff7fc6b80 (LWP 3551)^M
+ Line 0: address 0x7fffffffd4c0 [47 hits]^M
+ Line 1: address 0x7fffffffd500 [31 hits]^M
+ Line 2: address 0x7fffffffd5c0 [7 hits]^M
+ Cache state: 3 active lines, 85 hits^M
+ (gdb) FAIL: gdb.base/dcache-flush.exp: check dcache before flushing
+ ...
+ The regexp expects "Contains data for process $decimal".
+
+ This is another case of thread_db_target::pid_to_str being used.
+
+ Fix this by updating the regexp.
+
+ Tested on x86_64-linux.
+
+2021-09-27 Tom de Vries <tdevries@suse.de>
+
+ [gdb/testsuite] Test sw watchpoint in gdb.threads/process-dies-while-detaching.exp
+ The test-case gdb.threads/process-dies-while-detaching.exp takes about 20s
+ when using hw watchpoints, but when forcing sw watchpoints (using the patch
+ mentioned in PR28375#c0), the test-case takes instead 3m14s.
+
+ Also, it show a FAIL:
+ ...
+ (gdb) continue^M
+ Continuing.^M
+ Cannot find user-level thread for LWP 10324: generic error^M
+ (gdb) FAIL: gdb.threads/process-dies-while-detaching.exp: single-process:
+ continue: watchpoint: continue
+ ...
+ for which PR28375 was filed.
+
+ Modify the test-case to:
+ - add the hw/sw axis to the watchpoint testing, to ensure that we
+ observe the sw watchpoint behaviour also on can-use-hw-watchpoints
+ architectures.
+ - skip the hw breakpoint testing if not supported
+ - set the sw watchpoint later to avoid making the test
+ too slow. This still triggers the same PR, but now takes just 24s.
+
+ This patch adds a KFAIL for PR28375.
+
+ Tested on x86_64-linux.
+
+2021-09-27 Simon Marchi <simon.marchi@polymtl.ca>
+
+ gdb: fix indentation in gdbtypes.c
+ Change-Id: I7bfbb9d349a1f474256800c45e28fe3b1de08771
+
+2021-09-27 GDB Administrator <gdbadmin@sourceware.org>
+
+ Automatic date update in version.in
+
+2021-09-26 GDB Administrator <gdbadmin@sourceware.org>
+
+ Automatic date update in version.in
+
+2021-09-26 Peter Bergner <bergner@linux.ibm.com>
+
+ PowerPC: Enable mfppr mfppr32, mtppr and mtppr32 extended mnemonics on POWER5
+ SPR 896 and the mfppr mfppr32, mtppr and mtppr32 extended mnemonics were added
+ in ISA 2.03, so enable them on POWER5 and later.
+
+ opcodes/
+ * ppc-opc.c (powerpc_opcodes) <mfppr, mfppr32, mtppr, mtppr32>: Enable
+ on POWER5 and later.
+
+ gas/
+ * testsuite/gas/ppc/power5.s: New test.
+ * testsuite/gas/ppc/power5.d: Likewise.
+ * testsuite/gas/ppc/ppc.exp: Run it.
+ * testsuite/gas/ppc/power7.s: Remove tests for mfppr, mfppr32, mtppr
+ and mtppr32.
+ * testsuite/gas/ppc/power7.d: Likewise.
+
+2021-09-25 Tom de Vries <tdevries@suse.de>
+
+ [gdb/testsuite] Minimize gdb restarts
+ Minimize gdb restarts, applying the following rules:
+ - don't use prepare_for_testing unless necessary
+ - don't use clean_restart unless necessary
+
+ Also, if possible, replace build_for_executable + clean_restart
+ with prepare_for_testing for brevity.
+
+ Touches 68 test-cases.
+
+ Tested on x86_64-linux.
+
+2021-09-25 Alan Modra <amodra@gmail.com>
+
+ PR28346, segfault attempting to disassemble raw binary
+ Don't attempt to access elf_section_data for non-ELF sections.
+
+ PR 28346
+ * elf32-xtensa.c (xtensa_read_table_entries): Return zero entries
+ for non-ELF.
+
+2021-09-25 GDB Administrator <gdbadmin@sourceware.org>
+
+ Automatic date update in version.in
+
+2021-09-24 Hans-Peter Nilsson <hp@axis.com>
+
+ gas/testsuite/ld-elf/dwarf2-21.d: Pass -W
+ Required for the expected "CU:" to be emitted for long
+ source-paths. See binutils/dwarf.c:
+
+ if (do_wide || strlen (directory) < 76)
+ printf (_("CU: %s/%s:\n"), directory, file_table[0].name);
+ else
+ printf ("%s:\n", file_table[0].name);
+
+ See also commit 5f410aa50ce2c, "testsuite/ld-elf/pr26936.d:
+ Pass -W."
+
+ gas/ChangeLog:
+ * testsuite/ld-elf/dwarf2-21.d: Pass -W.
+
+2021-09-24 Simon Marchi <simon.marchi@polymtl.ca>
+
+ gdb: change thread_info::name to unique_xmalloc_ptr, add helper function
+ This started out as changing thread_info::name to a unique_xmalloc_ptr.
+ That showed that almost all users of that field had the same logic to
+ get a thread's name: use thread_info::name if non-nullptr, else ask the
+ target. Factor out this logic in a new thread_name free function. Make
+ the field private (rename to m_name) and add some accessors.
+
+ Change-Id: Iebdd95f4cd21fbefc505249bd1d05befc466a2fc
+
+2021-09-24 Tom Tromey <tom@tromey.com>
+
+ Move value_true to value.h
+ I noticed that value_true is declared in language.h and defined in
+ language.c. However, as part of the value API, I think it would be
+ better in one of those files. And, because it is very short, I
+ changed it to be an inline function in value.h. I've also removed a
+ comment from the implementation, on the basis that it seems obsolete
+ -- if the change it suggests was needed, it probably would have been
+ done by now; and if it is needed in the future, odds are it would be
+ done differently anyway.
+
+ Finally, this patch also changes value_true and value_logical_not to
+ return a bool, and updates some uses.
+
+2021-09-24 Pedro Alves <pedro@palves.net>
+
+ Make dcache multi-target-safe
+ By inspection, I noticed that this code in dcache.c is not
+ multi-target-aware:
+
+ /* If this is a different inferior from what we've recorded,
+ flush the cache. */
+
+ if (inferior_ptid != dcache->ptid)
+
+ This doesn't take into account that threads of different targets may
+ have the same ptid.
+
+ Fixed by also storing/comparing the process_stratum_target.
+
+ Tested on x86-64-linux-gnu, native and gdbserver.
+
+ Change-Id: I4d9d74052c696b72d28cb1c77b697b911725c8d3
+
+2021-09-24 Pedro Alves <pedro@palves.net>
+
+ Fix 'FAIL: gdb.perf/disassemble.exp: python Disassemble().run()'
+ We currently have one FAIL while running "make check-perf":
+
+ PerfTest::assemble, run ...
+ python Disassemble().run()
+ Traceback (most recent call last):
+ File "<string>", line 1, in <module>
+ File "/home/pedro/rocm/gdb/src/gdb/testsuite/gdb.perf/lib/perftest/perftest.py", line 64, in run
+ self.warm_up()
+ File "<string>", line 25, in warm_up
+ gdb.error: No symbol "ada_evaluate_subexp" in current context.
+ Error while executing Python code.
+ (gdb) FAIL: gdb.perf/disassemble.exp: python Disassemble().run()
+ ...
+
+ The gdb.perf/disassemble.exp testcase debugs GDB with itself, runs to
+ main, and then disassembles a few GDB functions. The problem is that
+ most(!) functions it is trying to disassemble are now gone...
+
+ This commit fixes the issue by simply picking some other functions to
+ disassemble.
+
+ It would perhaps be better to come up with some test program to
+ disassemble, one that would stay the same throughout the years,
+ instead of disassembling GDB itself. I don't know why that wasn't
+ done to begin with. I'll have to leave that for another rainy day,
+ though.
+
+ gdb/testsuite/
+ yyyy-mm-dd Pedro Alves <pedro@palves.net>
+
+ * gdb.perf/disassemble.py (Disassemble::warm_up): Disassemble
+ evaluate_subexp_do_call instead of ada_evaluate_subexp.
+ (Disassemble::warm_up): Disassemble "captured_main",
+ "run_inferior_call" and "update_global_location_list" instead of
+ "evaluate_subexp_standard" and "c_parse_internal".
+
+ Change-Id: I89d1cca89ce2e495dea5096e439685739cc0d3df
+
+2021-09-24 Pedro Alves <pedro@palves.net>
+
+ Fix all PATH problems in testsuite/gdb.perf/
+ Currently "make check-perf" triggers ~40 PATH messages in gdb.sum:
+
+ ...
+ PATH: gdb.perf/backtrace.exp: python sys.path.insert(0, os.path.abspath("/home/pedro/rocm/gdb/build/gdb/../../src/gdb/testsuite/gdb.perf/lib"))
+ PATH: gdb.perf/backtrace.exp: python exec (open ('/home/pedro/rocm/gdb/build/gdb/testsuite/outputs/gdb.perf/backtrace/backtrace.py').read ())
+ ...
+
+ This commit fixes them. E.g. before/after gdb.sum diff:
+
+ -PASS: gdb.perf/backtrace.exp: python import os, sys
+ -PASS: gdb.perf/backtrace.exp: python sys.path.insert(0, os.path.abspath("/home/pedro/rocm/gdb/build-master/gdb/../../src/gdb/testsuite/gdb.perf/lib"))
+ -PATH: gdb.perf/backtrace.exp: python sys.path.insert(0, os.path.abspath("/home/pedro/rocm/gdb/build-master/gdb/../../src/gdb/testsuite/gdb.perf/lib"))
+ -PASS: gdb.perf/backtrace.exp: python exec (open ('/home/pedro/rocm/gdb/build-master/gdb/testsuite/outputs/gdb.perf/backtrace/backtrace.py').read ())
+ -PATH: gdb.perf/backtrace.exp: python exec (open ('/home/pedro/rocm/gdb/build-master/gdb/testsuite/outputs/gdb.perf/backtrace/backtrace.py').read ())
+ +PASS: gdb.perf/backtrace.exp: setup perftest: python import os, sys
+ +PASS: gdb.perf/backtrace.exp: setup perftest: python sys.path.insert(0, os.path.abspath("${srcdir}/gdb.perf/lib"))
+ +PASS: gdb.perf/backtrace.exp: setup perftest: python exec (open ('${srcdir}/gdb.perf/backtrace.py').read ())
+
+ gdb/testsuite/
+ yyyy-mm-dd Pedro Alves <pedro@palves.net>
+
+ * lib/perftest.exp (PerfTest::_setup_perftest): Use
+ with_test_prefix. Add explicit test names to python invocations,
+ with "$srcdir" not expanded.
+
+ Change-Id: I50a31b04b7abdea754139509e4a34ae9263118a4
+
+2021-09-24 Pedro Alves <pedro@palves.net>
+
+ Fix all DUPLICATE problems in testsuite/gdb.perf/
+ Currently running "make check-perf" shows:
+
+ ...
+ # of duplicate test names 6008
+ ...
+
+ All those duplicate test names come from gdb.perf/skip-command.exp.
+ This commit fixes them, using with_test_prefix.
+
+ gdb/testsuite/
+ yyyy-mm-dd Pedro Alves <pedro@palves.net>
+
+ * gdb.perf/skip-command.exp (run_skip_bench): Wrap each for
+ iteration in with_test_prefix.
+
+ Change-Id: I38501cf70bc6b60306ee7228996ee7bcd858dc1b
+
+2021-09-24 Tom Tromey <tromey@adacore.com>
+
+ Fix handling of DW_AT_data_bit_offset
+ A newer version of GCC will now emit member locations using just
+ DW_AT_data_bit_offset, like:
+
+ <3><14fe>: Abbrev Number: 1 (DW_TAG_member)
+ <14ff> DW_AT_name : (indirect string, offset: 0x215e): nb_bytes
+ <1503> DW_AT_decl_file : 1
+ <1503> DW_AT_decl_line : 10
+ <1504> DW_AT_decl_column : 7
+ <1505> DW_AT_type : <0x150b>
+ <1509> DW_AT_bit_size : 31
+ <150a> DW_AT_data_bit_offset: 64
+
+ whereas earlier versions would emit something like:
+
+ <3><164f>: Abbrev Number: 7 (DW_TAG_member)
+ <1650> DW_AT_name : (indirect string, offset: 0x218d): nb_bytes
+ <1654> DW_AT_decl_file : 1
+ <1655> DW_AT_decl_line : 10
+ <1656> DW_AT_decl_column : 7
+ <1657> DW_AT_type : <0x165f>
+ <165b> DW_AT_byte_size : 4
+ <165c> DW_AT_bit_size : 31
+ <165d> DW_AT_bit_offset : 1
+ <165e> DW_AT_data_member_location: 8
+
+ That is, DW_AT_data_member_location is not emitted any more. This is
+ a change due to the switch to DWARF 5 by default.
+
+ This change pointed out an existing bug in gdb, namely that the
+ attr_to_dynamic_prop depends on the presence of
+ DW_AT_data_member_location. This patch moves the handling of
+ DW_AT_data_bit_offset into handle_data_member_location, and updates
+ attr_to_dynamic_prop to handle this new case.
+
+ A new test case is included. This test fails with GCC 11, but passes
+ with an earlier version of GCC.
+
+2021-09-24 Tom de Vries <tdevries@suse.de>
+
+ [gdb/testsuite] Don't leave gdb instance running after function_range
+ A typical dwarf assembly test-case start like this:
+ ...
+ standard_testfile .c -debug.S
+
+ set asm_file [standard_output_file $srcfile2]
+ Dwarf::assemble $asm_file {
+ ...
+ }
+
+ if { [prepare_for_testing "failed to prepare" ${testfile} \
+ [list $srcfile $asm_file] {nodebug}] } {
+ return -1
+ }
+ ...
+
+ When accidentally using build_for_executable instead of
+ prepare_for_testing (or intentionally using it but forgetting to add
+ clean_restart $binfile or some such) the mistake may not be caught, because
+ another gdb instance is still running, and we may silently end up testing
+ compiler-generated DWARF.
+
+ This can be caused by something relatively obvious, like an earlier
+ prepare_for_testing or clean_restart, but also by something more obscure like
+ function_range, which may even be triggered by dwarf assembly like this:
+ ...
+ {MACRO_AT_func {main}}
+ ...
+
+ Fix this by calling gdb_exit at the end of function_range.
+
+ Also fix the fallout of that in test-case gdb.dwarf2/dw2-bad-elf.exp, where a
+ get_sizeof call used the gdb instance left lingering by function_range.
+
+ [ A better and more complete fix would add a new proc get_exec_info, that would
+ be called at the start of the dwarf assembly body:
+ ...
+ Dwarf::assemble $asm_file {
+ get_exec_info {main foo} {int void*}
+ ...
+ that would:
+ - do a prepare_for_testing with $srcfile (roughtly equivalent to what
+ MACRO_AT_func does,
+ - call function_range for all functions main and foo, without starting a
+ new gdb instance
+ - set corresponding variables at the call-site: main_start, main_len,
+ main_end, foo_start, foo_len, foo_end.
+ - get size for types int and void*
+ - set corresponding variables at the call-site: int_size, void_ptr_size.
+ - do a gdb_exit. ]
+
+ Tested on x86_64-linux.
+
+2021-09-24 Tom de Vries <tdevries@suse.de>
+
+ [gdb/testsuite] Use pie instead of -fpie/-pie
+ I noticed two test-cases where -fpie is used. Using the canonical pie option
+ will usually get one -fPIE instead.
+
+ That choice is justified here in gdb_compile:
+ ...
+ # For safety, use fPIE rather than fpie. On AArch64, m68k, PowerPC
+ # and SPARC, fpie can cause compile errors due to the GOT exceeding
+ # a maximum size. On other architectures the two flags are
+ # identical (see the GCC manual). Note Debian9 and Ubuntu16.10
+ # onwards default GCC to using fPIE. If you do require fpie, then
+ # it can be set using the pie_flag.
+ set flag "additional_flags=-fPIE"
+ ...
+
+ There is no indication that using -fpie rather than -fPIE is on purpose, so
+ use pie instead.
+
+ Tested on x86_64-linux.
+
+2021-09-24 Tom de Vries <tdevries@suse.de>
+
+ [gdb/testsuite] Factor out dump_info in gdb.testsuite/dump-system-info.exp
+ Factor out new proc dump_info in test-case gdb.testsuite/dump-system-info.exp,
+ and in the process:
+ - fix a few typos
+ - remove unnecessary "test -r /proc/cpuinfo"
+
+ Tested on x86_64-linux.
+
+ Co-Authored-By: Pedro Alves <pedro@palves.net>
+
+2021-09-24 Pedro Alves <pedro@palves.net>
+
+ gdb/testsuite: Make it possible to use TCL variables in DWARF assembler loclists
+ It is currently not possible to use variables in locations lists. For
+ example, with:
+
+ diff --git a/gdb/testsuite/gdb.dwarf2/loclists-multiple-cus.exp b/gdb/testsuite/gdb.dwarf2/loclists-multiple-cus.exp
+ index 6b4f5c8cbb8..cdbf948619f 100644
+ --- a/gdb/testsuite/gdb.dwarf2/loclists-multiple-cus.exp
+ +++ b/gdb/testsuite/gdb.dwarf2/loclists-multiple-cus.exp
+ @@ -30,6 +30,8 @@ if {![dwarf2_support]} {
+ return 0
+ }
+
+ +set myconst 0x123456
+ +
+ # Test with 32-bit and 64-bit DWARF.
+ foreach_with_prefix is_64 {false true} {
+ if { $is_64 } {
+ @@ -49,6 +51,7 @@ foreach_with_prefix is_64 {false true} {
+ global func1_addr func1_len
+ global func2_addr func2_len
+ global is_64
+ + global myconst
+
+ # The CU uses the DW_FORM_loclistx form to refer to the .debug_loclists
+ # section.
+ @@ -107,7 +110,7 @@ foreach_with_prefix is_64 {false true} {
+ list_ {
+ # When in func1.
+ start_length $func1_addr $func1_len {
+ - DW_OP_constu 0x123456
+ + DW_OP_constu $myconst
+ DW_OP_stack_value
+ }
+
+ we get:
+
+ $ make check TESTS="*/loclists-multiple-cus.exp"
+ ...
+ gdb compile failed, build/gdb/testsuite/outputs/gdb.dwarf2/loclists-multiple-cus/loclists-multiple-cus-dw32.S: Assembler messages:
+ build/gdb/testsuite/outputs/gdb.dwarf2/loclists-multiple-cus/loclists-multiple-cus-dw32.S:78: Error: leb128 operand is an undefined symbol: $myconst
+ ...
+
+ That means $myconst was copied literally to the generated assembly
+ file.
+
+ This patch fixes it, by running subst on the location list body, in
+ the context of the caller. The fix is applied to both
+ Dwarf::loclists::table::list_::start_length and
+ Dwarf::loclists::table::list_::start_end.
+
+ Reported-by: Zoran Zaric <Zoran.Zaric@amd.com>
+
+ Change-Id: I615a64431857242d9f477d5699e3732df1b31322
+
+2021-09-24 Tom de Vries <tdevries@suse.de>
+
+ [gdb/testsuite] Fix DUPLICATEs in gdb.dwarf2/implptr-64bit.exp
+ When running test-case gdb.dwarf2/implptr-64bit.exp with target board
+ unix/-m32, I noticed:
+ ...
+ DUPLICATE: gdb.dwarf2/implptr-64bit.exp: failed to prepare
+ ...
+
+ Fix this by using with_test_prefix.
+
+ Tested on x86_64-linux.
+
+2021-09-24 Tom de Vries <tdevries@suse.de>
+
+ [gdb/testsuite] Fix DUPLICATEs gdb.dwarf2/dw2-is-stmt.exp
+ Fix these DUPLICATEs by using with_test_prefix:
+ ...
+ DUPLICATE: gdb.dwarf2/dw2-is-stmt.exp: ensure we saw a valid line pattern, 1
+ DUPLICATE: gdb.dwarf2/dw2-is-stmt.exp: ensure we saw a valid line pattern, 2
+ ...
+
+ Tested on x86_64-linux.
+
+2021-09-24 Tom de Vries <tdevries@suse.de>
+
+ [gdb/testsuite] Fix set $var val in gdb.dwarf2/dw2-is-stmt.exp
+ When doing a testrun with:
+ ...
+ $ make check RUNTESTFLAGS=$(cd $src/gdb/testsuite/; echo gdb.dwarf2/*.exp)
+ ...
+ I ran into:
+ ...
+ ERROR: tcl error sourcing gdb.dwarf2/dw2-is-stmt.exp.
+ ERROR: expected integer but got "dw2-abs-hi-pc-world.c"
+ while executing
+ "incr i"
+ ...
+
+ The variable i is set in gdb.dwarf2/dw2-abs-hi-pc.exp, and leaks to
+ gdb.dwarf2/dw2-is-stmt.exp. It's not removed by gdb_cleanup_globals because i
+ is set as global variable by runtest.exp, which does:
+ ...
+ for { set i 0 } { $i < $argc } { incr i } {
+ ...
+ at toplevel but forgets to unset the variable.
+
+ Fix this by removing '$' in front of the variable name when doing set:
+ ...
+ -set $i 0
+ +set i 0
+ ...
+
+ Tested on x86_64-linux.
+
+2021-09-24 Tom de Vries <tdevries@suse.de>
+
+ [gdb/testsuite] Fix DUPLICATE in gdb.base/load-command.exp
+ Fix this duplicate:
+ ...
+ DUPLICATE: gdb.base/load-command.exp: check initial value of the_variable
+ ...
+ by using with_test_prefix.
+
+ Tested on x86_64-linux.
+
+2021-09-24 Tom de Vries <tdevries@suse.de>
+
+ [gdb/testsuite] Use pie/nopie instead of ldflags=-pie/-no-pie
+ I noticed two test-case that use ldflags=-pie and ldflags-no-pie, instead of
+ the canonical pie and nopie options, which would typically also add
+ additional_flags=-fPIE respectively additional_flags=-fno-pie.
+
+ There is no indication that this is on purpose, so replace these with pie and
+ nopie.
+
+ Tested on x86_64-linux.
+
+2021-09-24 Tom de Vries <tdevries@suse.de>
+
+ [gdb/testsuite] Add gdb.testsuite/dump-system-info.exp
+ When interpreting the testsuite results, it's often relevant what kind of
+ machine the testsuite ran on. On a local machine one can just do
+ /proc/cpuinfo, but in case of running tests using a remote system
+ that distributes test runs to other remote systems that are not directly
+ accessible, that's not possible.
+
+ Fix this by dumping /proc/cpuinfo into the gdb.log, as well as lsb_release -a
+ and uname -a.
+
+ We could do this at the start of each test run, by putting it into unix.exp
+ or some such. However, this might be too verbose, so we choose to put it into
+ its own test-case, such that it get triggered in a full testrun, but not when
+ running one or a subset of tests.
+
+ We put the test-case into the gdb.testsuite directory, which is currently the
+ only place in the testsuite where we do not test gdb. [ Though perhaps this
+ could be put into a new gdb.info directory, since the test-case doesn't
+ actually test the testsuite. ]
+
+ Tested on x86_64-linux.
+
+2021-09-24 GDB Administrator <gdbadmin@sourceware.org>
+
+ Automatic date update in version.in
+
+2021-09-23 Tom Tromey <tom@tromey.com>
+
+ Change pointer_type to a method of struct type
+ I noticed that pointer_type is declared in language.h and defined in
+ language.c. However, it really has to do with types, so it should
+ have been in gdbtypes.h all along.
+
+ This patch changes it to be a method on struct type. And, I went
+ through uses of TYPE_IS_REFERENCE and updated many spots to use the
+ new method as well. (I didn't update ones that were in arch-specific
+ code, as I couldn't readily test that.)
+
+2021-09-23 Tom de Vries <tdevries@suse.de>
+
+ [gdb/testsuite] Support -fPIE/-fno-PIE/-pie/-no-pie in gdb_compile_rust
+ When running gdb.rust/*.exp test-cases with target board unix/-fPIE/-pie, I
+ run into:
+ ...
+ builtin_spawn -ignore SIGHUP rustc --color never gdb.rust/watch.rs \
+ -g -lm -fPIE -pie -o outputs/gdb.rust/watch/watch^M
+ error: Unrecognized option: 'f'^M
+ ^M
+ compiler exited with status 1
+ ...
+
+ The problem is that -fPIE and -fpie are gcc options, but for rust we use
+ rustc, which has different compilation options.
+
+ Fix this by translating the gcc options to rustc options in gdb_compile_rust,
+ similar to how that is done for ada in target_compile_ada_from_dir.
+
+ Likewise for unix/-fno-PIE/-no-pie.
+
+ Tested on x86_64-linux, with:
+ - native
+ - unix/-fPIE/-pie
+ - unix/-fno-PIE/-no-pie
+ specifically, on openSUSE Leap 15.2 both with package gcc-PIE:
+ - installed (making gcc default to PIE)
+ - uninstalled (making gcc default to non-PIE).
+ and rustc 1.52.1.
+
+2021-09-23 Tom de Vries <tdevries@suse.de>
+
+ [gdb/testsuite] Use pie instead of -fPIE -pie
+ Replace {additional_flags=-fPIE ldflags=-pie} with {pie}.
+
+ This makes sure that the test-cases properly error out when using target board
+ unix/-fno-PIE/-no-pie.
+
+ Tested on x86_64-linux.
+
+2021-09-23 Tom de Vries <tdevries@suse.de>
+
+ [gdb/testsuite] Fix probe test in gdb.base/break-interp.exp
+ When running test-case gdb.base/break-interp.exp on ubuntu 18.04.5, we have:
+ ...
+ (gdb) bt^M
+ #0 0x00007eff7ad5ae12 in ?? () from break-interp-LDprelinkNOdebugNO^M
+ #1 0x00007eff7ad71f50 in ?? () from break-interp-LDprelinkNOdebugNO^M
+ #2 0x00007eff7ad59128 in ?? () from break-interp-LDprelinkNOdebugNO^M
+ #3 0x00007eff7ad58098 in ?? () from break-interp-LDprelinkNOdebugNO^M
+ #4 0x0000000000000002 in ?? ()^M
+ #5 0x00007fff505d7a32 in ?? ()^M
+ #6 0x00007fff505d7a94 in ?? ()^M
+ #7 0x0000000000000000 in ?? ()^M
+ (gdb) FAIL: gdb.base/break-interp.exp: ldprelink=NO: ldsepdebug=NO: \
+ first backtrace: dl bt
+ ...
+
+ Using the backtrace, the test-case tries to establish that we're stopped in
+ dl_main.
+
+ However, the backtrace only shows an address, because:
+ - the dynamic linker contains no minimal symbols and no debug info, and
+ - gdb is build without --with-separate-debug-dir so it can't find the
+ corresponding .debug file, which does contain the mimimal symbols and
+ debug info.
+
+ As in "[gdb/testsuite] Improve probe detection in gdb.base/break-probes.exp",
+ fix this by doing info probes and grepping for the address.
+
+ Tested on x86_64-linux.
+
+2021-09-23 Tom de Vries <tdevries@suse.de>
+
+ [gdb/testsuite] Improve probe detection in gdb.base/break-probes.exp
+ When running test-case gdb.base/break-probes.exp on ubuntu 18.04.5, we have:
+ ...
+ (gdb) run^M
+ Starting program: break-probes^M
+ Stopped due to shared library event (no libraries added or removed)^M
+ (gdb) bt^M
+ #0 0x00007ffff7dd6e12 in ?? () from /lib64/ld-linux-x86-64.so.2^M
+ #1 0x00007ffff7dedf50 in ?? () from /lib64/ld-linux-x86-64.so.2^M
+ #2 0x00007ffff7dd5128 in ?? () from /lib64/ld-linux-x86-64.so.2^M
+ #3 0x00007ffff7dd4098 in ?? () from /lib64/ld-linux-x86-64.so.2^M
+ #4 0x0000000000000001 in ?? ()^M
+ #5 0x00007fffffffdaac in ?? ()^M
+ #6 0x0000000000000000 in ?? ()^M
+ (gdb) UNSUPPORTED: gdb.base/break-probes.exp: probes not present on this system
+ ...
+
+ Using the backtrace, the test-case tries to establish that we're stopped in
+ dl_main, which is used as proof that we're using probes.
+
+ However, the backtrace only shows an address, because:
+ - the dynamic linker contains no minimal symbols and no debug info, and
+ - gdb is build without --with-separate-debug-dir so it can't find the
+ corresponding .debug file, which does contain the mimimal symbols and
+ debug info.
+
+ Fix this by instead printing the pc and grepping for the value in the
+ info probes output:
+ ...
+ (gdb) p /x $pc^M
+ $1 = 0x7ffff7dd6e12^M
+ (gdb) info probes^M
+ Type Provider Name Where Object ^M
+ ...
+ stap rtld init_start 0x00007ffff7dd6e12 /lib64/ld-linux-x86-64.so.2 ^M
+ ...
+ (gdb)
+ ...
+
+ Tested on x86_64-linux.
+
+2021-09-23 Tom de Vries <tdevries@suse.de>
+
+ [gdb/testsuite] Handle failing probe detection in gdb.base/break-probes.exp
+ When running test-case gdb.base/break-probes.exp on ubuntu 18.04.5, we have:
+ ...
+ (gdb) bt^M
+ #0 0x00007ffff7dd6e12 in ?? () from /lib64/ld-linux-x86-64.so.2^M
+ #1 0x00007ffff7dedf50 in ?? () from /lib64/ld-linux-x86-64.so.2^M
+ #2 0x00007ffff7dd5128 in ?? () from /lib64/ld-linux-x86-64.so.2^M
+ #3 0x00007ffff7dd4098 in ?? () from /lib64/ld-linux-x86-64.so.2^M
+ #4 0x0000000000000001 in ?? ()^M
+ #5 0x00007fffffffdaac in ?? ()^M
+ #6 0x0000000000000000 in ?? ()^M
+ (gdb) FAIL: gdb.base/break-probes.exp: ensure using probes
+ ...
+
+ The test-case intends to emit an UNTESTED in this case, but fails to do so
+ because it tries to do it in a regexp clause in a gdb_test_multiple, which
+ doesn't trigger. Instead, a default clause triggers which produces the FAIL.
+
+ Also the use of UNTESTED is not appropriate, and we should use UNSUPPORTED
+ instead.
+
+ Fix this by silencing the FAIL, and emitting an UNSUPPORTED after the
+ gdb_test_multiple:
+ ...
+ if { ! $using_probes } {
+ + unsupported "probes not present on this system"
+ return -1
+ }
+ ...
+
+ Tested on x86_64-linux.
+
+2021-09-23 Tom de Vries <tdevries@suse.de>
+
+ [gdb/testsuite] Use early-out style in gdb.base/break-probes.exp
+ Reduce indentation and improve readability in test-case
+ gdb.base/break-probes.exp by replacing:
+ ...
+ if { <cond> } {
+ <lots-of-code>
+ }
+ ...
+ with:
+ ...
+ if { ! <cond> } {
+ return -1
+ }
+ <lots-of-code>
+ ...
+
+ Tested on x86_64-linux.
+
+2021-09-23 Pedro Alves <pedro@palves.net>
+
+ Test that frame info/IDs are stable/consistent
+ This adds a testcase that tests that the unwinder produces consistent
+ frame info and frame IDs by making sure that "info frame" shows the
+ same result when stopped at a function (level == 0), compared to when
+ we find the same frame in the stack at a level > 0.
+
+ E.g., on x86-64, right after running to main, we see:
+
+ (gdb) info frame
+ Stack level 0, frame at 0x7fffffffd340:
+ rip = 0x555555555168 in main (gdb.base/backtrace.c:41); saved rip = 0x7ffff7dd90b3
+ source language c.
+ Arglist at 0x7fffffffd330, args:
+ Locals at 0x7fffffffd330, Previous frame's sp is 0x7fffffffd340
+ Saved registers:
+ rbp at 0x7fffffffd330, rip at 0x7fffffffd338
+ (gdb)
+
+ and then after continuing to a function called by main, and selecting
+ the "main" frame again, we see:
+
+ (gdb) info frame
+ Stack level 3, frame at 0x7fffffffd340:
+ rip = 0x555555555172 in main (gdb.base/backtrace.c:41); saved rip = 0x7ffff7dd90b3
+ caller of frame at 0x7fffffffd330
+ source language c.
+ Arglist at 0x7fffffffd330, args:
+ Locals at 0x7fffffffd330, Previous frame's sp is 0x7fffffffd340
+ Saved registers:
+ rbp at 0x7fffffffd330, rip at 0x7fffffffd338
+ (gdb)
+
+ The only differences should be in the stack level, the 'rip = '
+ address, and the presence of the "caller of frame at" info. All the
+ rest should be the same. If it isn't, it probably means that the
+ frame base, the frame ID, etc. aren't stable & consistent.
+
+ The testcase exercises both the DWARF and the heuristic unwinders,
+ using "maint set dwarf unwinder on/off".
+
+ Tested on {x86-64 -m64, x86-64 -m32, Aarch64, Power8} GNU/Linux.
+
+ Change-Id: I795001c82cc70d543d197415e3f80ce5dc7f3452
+
+2021-09-23 Tom Tromey <tromey@adacore.com>
+
+ Change get_ada_task_ptid parameter type
+ get_ada_task_ptid currently takes a 'long' as its 'thread' parameter
+ type. However, on some platforms this is actually a pointer, and
+ using 'long' can sometimes end up with the value being sign-extended.
+ This sign extension can cause problems later, if the tid is then later
+ used as an address again.
+
+ This patch changes the parameter type to ULONGEST and updates all the
+ uses. This approach preserves sign extension on the targets where it
+ is apparently intended, while avoiding it on others.
+
+ Co-Authored-By: John Baldwin <jhb@FreeBSD.org>
+
+2021-09-23 Tom Tromey <tromey@adacore.com>
+
+ Change ptid_t::tid to ULONGEST
+ The ptid_t 'tid' member is normally used as an address in gdb -- both
+ bsd-uthread and ravenscar-thread use it this way. However, because
+ the type is 'long', this can cause problems with sign extension.
+
+ This patch changes the type to ULONGEST to ensure that sign extension
+ does not occur.
+
+2021-09-23 Tom Tromey <tromey@adacore.com>
+
+ Remove defaulted 'tid' parameter to ptid_t constructor
+ I wanted to find, and potentially modify, all the spots where the
+ 'tid' parameter to the ptid_t constructor was used. So, I temporarily
+ removed this parameter and then rebuilt.
+
+ In order to make it simpler to search through the "real" (nonzero)
+ uses of this parameter, something I knew I'd have to do multiple
+ times, I removed any ", 0" from constructor calls.
+
+ Co-Authored-By: John Baldwin <jhb@FreeBSD.org>
+
+2021-09-23 Tom Tromey <tom@tromey.com>
+
+ Style the "XXX" text in ptype/o
+ This patch changes gdb to use the 'highlight' style on the "XXX" text
+ in the output of ptype/o.
+
+2021-09-23 GDB Administrator <gdbadmin@sourceware.org>
+
+ Automatic date update in version.in
+
+2021-09-22 Tom de Vries <tdevries@suse.de>
+
+ [gdb/testsuite] Fix gdb.python/py-events.exp
+ With test-case gdb.python/py-events.exp on ubuntu 18.04.5 we run into:
+ ...
+ (gdb) info threads^M
+ Id Target Id Frame ^M
+ * 1 Thread 0x7ffff7fc3740 (LWP 31467) "py-events" do_nothing () at \
+ src/gdb/testsuite/gdb.python/py-events-shlib.c:19^M
+ (gdb) FAIL: gdb.python/py-events.exp: get current thread
+ ...
+
+ The info thread commands uses "Thread" instead of "process" because
+ libpthread is already loaded:
+ ...
+ new objfile name: /lib/x86_64-linux-gnu/libdl.so.2^M
+ [Thread debugging using libthread_db enabled]^M
+ Using host libthread_db library "/lib/x86_64-linux-gnu/libthread_db.so.1".^M
+ event type: new_objfile^M
+ new objfile name: /lib/x86_64-linux-gnu/libpthread.so.0^M
+ ...
+ and consequently thread_db_target::pid_to_str is used.
+
+ Fix this by parsing the "Thread" expression.
+
+ Tested on x86_64-linux.
+
+2021-09-22 Tom de Vries <tdevries@suse.de>
+
+ [gdb] Add maint selftest -verbose option
+ The print_one_insn selftest in gdb/disasm-selftests.c contains:
+ ...
+ /* If you want to see the disassembled instruction printed to gdb_stdout,
+ set verbose to true. */
+ static const bool verbose = false;
+ ...
+
+ Make this parameter available in the maint selftest command using a new option
+ -verbose, such that we can do:
+ ...
+ (gdb) maint selftest -verbose print_one_insn
+ ...
+
+ Tested on x86_64-linux.
+
+2021-09-22 Alan Modra <amodra@gmail.com>
+
+ dwarf2 sub-section test
+ This is a testcase for the bug fixed by commit 5b4846283c3d. When
+ running the testcase on ia64 targets I found timeouts along with lots
+ of memory being consumed, due to ia64 gas not tracking text
+ sub-sections. Trying to add nops for ".nop 16" in ".text 1" resulting
+ in them being added to subsegment 0, with no increase to subsegment 1
+ size. This patch also fixes that problem.
+
+ Note that the testcase fails on ft32-elf, mn10200-elf, score-elf,
+ tic5x-elf, and xtensa-elf. The first two are relocation errors, the
+ last three appear to be the .nop directive failing to emit the right
+ number of nops. I didn't XFAIL any of them.
+
+ * config/tc-ia64.c (md): Add last_text_subseg.
+ (ia64_flush_insns, dot_endp): Use last_text_subseg.
+ (ia64_frob_label, md_assemble): Set last_text_subseg.
+ * testsuite/gas/elf/dwarf2-21.d,
+ * testsuite/gas/elf/dwarf2-21.s: New test.
+ * testsuite/gas/elf/elf.exp: Run it.
+
+2021-09-22 Alan Modra <amodra@gmail.com>
+
+ Fix x86 "FAIL: TLS -fno-pic -shared"
+ Fix a typo in commit 5d0869d9872a
+
+ * testsuite/ld-i386/tlsnopic.rd: Typo fix.
+
+2021-09-22 GDB Administrator <gdbadmin@sourceware.org>
+
+ Automatic date update in version.in
+
+2021-09-21 Nick Clifton <nickc@redhat.com>
+
+ Change the linker's heuristic for computing the entry point for binaries so that shared libraries default to an entry point of 0.
+ * ldlang.c (lang_end): When computing the entry point, only
+ try the start address of the entry section when creating an
+ executable.
+ * ld.texi (Entry point): Update description of heuristic used to
+ choose the entry point.
+ testsuite/ld-alpha/tlspic.rd: Update expected entry point address.
+ testsuite/ld-arm/tls-gdesc-got.d: Likewise.
+ testsuite/ld-i386/tlsnopic.rd: Likewise.
+ testsuite/ld-ia64/tlspic.rd: Likewise.
+ testsuite/ld-sparc/gotop32.rd: Likewise.
+ testsuite/ld-sparc/gotop64.rd: Likewise.
+ testsuite/ld-sparc/tlssunnopic32.rd: Likewise.
+ testsuite/ld-sparc/tlssunnopic64.rd: Likewise.
+ testsuite/ld-sparc/tlssunpic32.rd: Likewise.
+ testsuite/ld-sparc/tlssunpic64.rd: Likewise.
+ testsuite/ld-tic6x/shlib-1.rd: Likewise.
+ testsuite/ld-tic6x/shlib-1b.rd: Likewise.
+ testsuite/ld-tic6x/shlib-1r.rd: Likewise.
+ testsuite/ld-tic6x/shlib-1rb.rd: Likewise.
+ testsuite/ld-tic6x/shlib-noindex.rd: Likewise.
+ testsuite/ld-x86-64/pr14207.d: Likewise.
+ testsuite/ld-x86-64/tlsdesc.rd: Likewise.
+ testsuite/ld-x86-64/tlspic.rd: Likewise.
+ testsuite/ld-x86-64/tlspic2.rd: Likewise.
+
+2021-09-21 Tom de Vries <tdevries@suse.de>
+
+ [gdb/testsuite] Handle supports_memtag in gdb.base/gdb-caching-proc.exp
+ In test-case gdb.base/gdb-caching-proc.exp, we run all procs declared with
+ gdb_caching_proc. Some of these require a gdb instance, some not.
+
+ We could just do a clean_restart every time, but that would amount to 44 gdb
+ restarts. We try to minimize this by doing this only for the few procs that
+ need it, and hardcoding those in the test-case.
+
+ For those procs, we do a clean_restart, execute the proc, and then do a
+ gdb_exit, to make sure the gdb instance doesn't linger such that we detect
+ procs that need a gdb instance but are not listed in the test-case.
+
+ However, that doesn't work in the case of gnat_runtime_has_debug_info. This
+ proc doesn't require a gdb instance because it starts its own. But it doesn't
+ clean up the gdb instance, and since it's not listed, the test-case
+ doesn't clean up the gdb instance eiter. Consequently, the proc
+ supports_memtag (which should be listed, but isn't) uses the gdb instance
+ started by gnat_runtime_has_debug_info rather than throwing an error. Well,
+ unless gnat_runtime_has_debug_info fails before starting a gdb instance, in
+ which case we do run into the error.
+
+ Fix this by:
+ - doing gdb_exit unconditionally
+ - fixing the resulting error by adding supports_memtag in the test-case to
+ the "needing gdb instance" list
+
+ Tested on x86_64-linux.
+
+2021-09-21 Felix Willgerodt <felix.willgerodt@intel.com>
+
+ gdb, doc: Add ieee_half and bfloat16 to list of predefined target types.
+ For some reason these two weren't added to the list when they were orginally
+ added to GDB.
+
+ gdb/doc/ChangeLog:
+ 2021-09-21 Felix Willgerodt <felix.willgerodt@intel.com>
+
+ * gdb.texinfo (Predefined Target Types): Mention ieee_half and bfloat16.
+
+2021-09-21 GDB Administrator <gdbadmin@sourceware.org>
+
+ Automatic date update in version.in
+
+2021-09-20 Tom de Vries <tdevries@suse.de>
+
+ [gdb/testsuite] Fix gdb.ada/interface.exp with gcc-9
+ When running test-case gdb.ada/interface.exp with gcc-9, we run into:
+ ...
+ (gdb) info locals^M
+ s = (x => 1, y => 2, w => 3, h => 4)^M
+ r = (x => 1, y => 2, w => 3, h => 4)^M
+ (gdb) FAIL: gdb.ada/interface.exp: info locals
+ ...
+
+ The failure is caused by the regexp expecting variable r followed by
+ variable s.
+
+ Fix this by allowing variable s followed by variable r as well.
+
+ Tested on x86_64-linux.
+
+2021-09-20 Tom de Vries <tdevries@suse.de>
+
+ [gdb/testsuite] Fix gdb.ada/mi_prot.exp
+ When running test-case gdb.ada/mi_prot.exp with gcc 8.5.0, we run into:
+ ...
+ (gdb) ^M
+ Expecting: ^(-stack-list-arguments --no-frame-filters 1[^M
+ ]+)?(\^done,stack=.*[^M
+ ]+[(]gdb[)] ^M
+ [ ]*)
+ -stack-list-arguments --no-frame-filters 1^M
+ ^done,stack-args=[frame={level="0",args=[{name="<_object>",value="(ceiling_priority =\
+ > 97, local => 0)"},{name="v",value="5"},{name="<_objectO>",value="true"}]},frame={le\
+ vel="1",args=[{name="v",value="5"},{name="<_objectO>",value="true"}]},frame={level="2\
+ ",args=[]}]^M
+ (gdb) ^M
+ FAIL: gdb.ada/mi_prot.exp: -stack-list-arguments --no-frame-filters 1 (unexpected out\
+ put)
+ ...
+
+ Fix this by updating the regexp to expect "^done,stack-args=" instead of
+ "^done,stack=".
+
+ Tested on x86_64-linux.
+
+2021-09-20 Tom de Vries <tdevries@suse.de>
+
+ [gdb/testsuite] Register test for each arch separately in register_test_foreach_arch
+ In gdb/disasm-selftests.c we have:
+ ...
+ selftests::register_test_foreach_arch ("print_one_insn",
+ selftests::print_one_insn_test);
+ ...
+ and we get:
+ ...
+ $ gdb -q -batch -ex "maint selftest print_one_insn" 2>&1 \
+ | grep ^Running
+ Running selftest print_one_insn.
+ $
+ ...
+
+ Change the semantics register_test_foreach_arch such that a version of
+ print_one_insn is registered for each architecture, such that we have:
+ ...
+ $ gdb -q -batch -ex "maint selftest print_one_insn" 2>&1 \
+ | grep ^Running
+ Running selftest print_one_insn::A6.
+ Running selftest print_one_insn::A7.
+ Running selftest print_one_insn::ARC600.
+ ...
+ $
+ ...
+
+ This makes it f.i. possible to do:
+ ...
+ $ gdb -q -batch a.out -ex "maint selftest print_one_insn::armv8.1-m.main"
+ Running selftest print_one_insn::armv8.1-m.main.
+ Self test failed: self-test failed at src/gdb/disasm-selftests.c:165
+ Ran 1 unit tests, 1 failed
+ ...
+
+ Tested on x86_64-linux with an --enable-targets=all build.
+
+2021-09-20 Tom de Vries <tdevries@suse.de>
+
+ [gdb] Change register_test to use std::function arg
+ Change register_test to use std::function arg, such that we can do:
+ ...
+ register_test (test_name, [=] () { SELF_CHECK (...); });
+ ...
+
+ Tested on x86_64-linux.
+
+2021-09-20 Tom de Vries <tdevries@suse.de>
+
+ [gdb/testsuite] Fix gdb.ada/big_packed_array.exp xfail for -m32
+ With test-case gdb.ada/big_packed_array.exp and target board unix/-m32 I run
+ into:
+ ...
+ (gdb) print bad^M
+ $2 = (0 => 0 <repeats 24 times>, 160)^M
+ (gdb) FAIL: gdb.ada/big_packed_array.exp: scenario=minimal: print bad
+ ...
+
+ The problem is that while the variable is an array of 196 bits (== 24.5 bytes),
+ the debug information describes it as 25 unsigned char. This is PR
+ gcc/101643, and the test-case contains an xfail for this, which catches only:
+ ...
+ (gdb) print bad^M
+ $2 = (0 => 0 <repeats 25 times>)^M
+ ...
+
+ Fix this by updating the xfail pattern.
+
+ Tested on x86_64-linux.
+
+2021-09-20 Simon Marchi <simon.marchi@polymtl.ca>
+
+ gdbsupport/gdb_proc_service.h: use decltype instead of typeof
+ Bug 28341 shows that GDB fails to compile when built with -std=c++11.
+ I don't know much about the use case, but according to the author of the
+ bug:
+
+ I encountered the scenario where CXX is set to "g++ -std=c++11" when
+ I try to compile binutils under GCC as part of the GCC 3-stage
+ compilation, which is common for building a cross-compiler.
+
+ The author of the bug suggests using __typeof__ instead of typeof. But
+ since we're using C++, we might as well use decltype, which is standard.
+ This is what this patch does.
+
+ The failure (and fix) can be observed by configuring GDB with CXX="g++
+ -std=c++11":
+
+ CXX linux-low.o
+ In file included from /home/simark/src/binutils-gdb/gdbserver/gdb_proc_service.h:22,
+ from /home/simark/src/binutils-gdb/gdbserver/linux-low.h:27,
+ from /home/simark/src/binutils-gdb/gdbserver/linux-low.cc:20:
+ /home/simark/src/binutils-gdb/gdbserver/../gdbsupport/gdb_proc_service.h:177:50: error: expected constructor, destructor, or type conversion before (token
+ 177 | __attribute__((visibility ("default"))) typeof (SYM) SYM
+ | ^
+ /home/simark/src/binutils-gdb/gdbserver/../gdbsupport/gdb_proc_service.h:179:1: note: in expansion of macro PS_EXPORT
+ 179 | PS_EXPORT (ps_get_thread_area);
+ | ^~~~~~~~~
+
+ Bug: https://sourceware.org/bugzilla/show_bug.cgi?id=28341
+ Change-Id: I84fbaae938209d8d935ca08dec9b7e6a0dd1bda0
+
+2021-09-20 Andrew Burgess <andrew.burgess@embecosm.com>
+
+ riscv: print .2byte or .4byte before an unknown instruction encoding
+ When the RISC-V disassembler encounters an unknown instruction, it
+ currently just prints the value of the bytes, like this:
+
+ Dump of assembler code for function custom_insn:
+ 0x00010132 <+0>: addi sp,sp,-16
+ 0x00010134 <+2>: sw s0,12(sp)
+ 0x00010136 <+4>: addi s0,sp,16
+ 0x00010138 <+6>: 0x52018b
+ 0x0001013c <+10>: 0x9c45
+
+ My proposal, in this patch, is to change the behaviour to this:
+
+ Dump of assembler code for function custom_insn:
+ 0x00010132 <+0>: addi sp,sp,-16
+ 0x00010134 <+2>: sw s0,12(sp)
+ 0x00010136 <+4>: addi s0,sp,16
+ 0x00010138 <+6>: .4byte 0x52018b
+ 0x0001013c <+10>: .2byte 0x9c45
+
+ Adding the .4byte and .2byte opcodes. The benefit that I see here is
+ that in the patched version of the tools, the disassembler output can
+ be fed back into the assembler and it should assemble to the same
+ binary format. Before the patch, the disassembler output is invalid
+ assembly.
+
+ I've started a RISC-V specific test file under binutils so that I can
+ add a test for this change.
+
+ binutils/ChangeLog:
+
+ * testsuite/binutils-all/riscv/riscv.exp: New file.
+ * testsuite/binutils-all/riscv/unknown.d: New file.
+ * testsuite/binutils-all/riscv/unknown.s: New file.
+
+ opcodes/ChangeLog:
+
+ * riscv-dis.c (riscv_disassemble_insn): Print a .%dbyte opcode
+ before an unknown instruction, '%d' is replaced with the
+ instruction length.
+
+2021-09-20 Alan Modra <amodra@gmail.com>
+
+ Fix allocate_filenum last dir/file checks
+ * dwarf2dbg.c (allocate_filenum) Correct use of last_used_dir_len.
+
+2021-09-20 Alan Modra <amodra@gmail.com>
+
+ Re: PR28149, debug info with wrong file association
+ Fixes segfaults when building aarch64-linux kernel, due to only doing
+ part of the work necessary when allocating file numbers late. I'd
+ missed looping over subsegments, which resulted in some u.filename
+ entries left around and later interpreted as u.view.
+
+ PR 28149
+ * dwarf2dbg.c (purge_generated_debug): Iterate over subsegs too.
+ (dwarf2_finish): Call do_allocate_filenum for all subsegs too,
+ in a separate loop before subsegs are chained.
+
+2021-09-20 Alan Modra <amodra@gmail.com>
+
+ Move eelf_mipsel_haiki.c to ALL_64_EMULATION_SOURCES
+ --enable-targets=all on a 32-bit host results in a link failure with
+ undefined references due to elfxx-mips.c not being compiled. This
+ patch fixes that by putting eelf_mipsel_haiki.c in the correct
+ EMULATION_SOURCES Makefile variable. I've also added a bunch of
+ missing file dependencies and sorted a few things so that it's easier
+ to verify dependencies are present.
+
+ * Makfile.am: Add missing haiku dependencies, sort.
+ (ALL_EMULATION_SOURCES): Sort. Move eelf_mipsel_haiku.c to..
+ (ALL_64_EMULATION_SOURCES): ..here. Sort.
+ * Makfile.in: Regenerate.
+
+2021-09-20 GDB Administrator <gdbadmin@sourceware.org>
+
+ Automatic date update in version.in
+
+2021-09-19 H.J. Lu <hjl.tools@gmail.com>
+
+ elf: Don't set version info on unversioned symbols
+ Don't set version info on unversioned symbols when seeing a hidden
+ versioned symbol after an unversioned definition and the default
+ versioned symbol.
+
+ bfd/
+
+ PR ld/28348
+ * elflink.c (elf_link_add_object_symbols): Don't set version info
+ on unversioned symbols.
+
+ ld/
+
+ PR ld/28348
+ * testsuite/ld-elf/pr28348.rd: New file.
+ * testsuite/ld-elf/pr28348.t: Likewise.
+ * testsuite/ld-elf/pr28348a.c: Likewise.
+ * testsuite/ld-elf/pr28348b.c: Likewise.
+ * testsuite/ld-elf/pr28348c.c: Likewise.
+ * testsuite/ld-elf/shared.exp: Run PR ld/28348 tests.
+
+2021-09-19 Mike Frysinger <vapier@gentoo.org>
+
+ gdb: manual: update @inforef to @xref
+ The @inforef command is deprecated, and @xref does the samething.
+ Also had to update the text capitalization to match current manual.
+ Verified that info & HTML links work.
+
+2021-09-19 Weimin Pan <weimin.pan@oracle.com>
+
+ CTF: multi-CU and archive support
+ Now gdb is capable of debugging executable, which consists of multiple
+ compilation units (CUs) with the CTF debug info. An executable could
+ potentially have one or more archives, which, in CTF context, contain
+ conflicting types.
+
+ all changes were made in ctfread.c in which elfctf_build_psymtabs was
+ modified to handle archives, via the ctf archive iterator and its callback
+ build_ctf_archive_member and scan_partial_symbols was modified to scan
+ archives, which are treated as subfiles, to build the psymtabs.
+
+ Also changes were made to handle CTF's data object section and function
+ info section which now share the same format of their contents - an array
+ of type IDs. New functions ctf_psymtab_add_stt_entries, which is called by
+ ctf_psymtab_add_stt_obj and ctf_psymtab_add_stt_func, and add_stt_entries,
+ which is called by add_stt_obj and add_stt_func when setting up psymtabs
+ and full symtab, respectively.
+
+2021-09-19 GDB Administrator <gdbadmin@sourceware.org>
+
+ Automatic date update in version.in
+
+2021-09-18 Tom de Vries <tdevries@suse.de>
+
+ [gdb/testsuite] Fix gdb.server/server-kill.exp with -m32
+ When running test-case gdb.server/server-kill.exp with target board unix/-m32,
+ I run into:
+ ...
+ 0xf7fd6b20 in _start () from /lib/ld-linux.so.2^M
+ (gdb) Executing on target: kill -9 13082 (timeout = 300)
+ builtin_spawn -ignore SIGHUP kill -9 13082^M
+ bt^M
+ (gdb) FAIL: gdb.server/server-kill.exp: kill_pid_of=server: test_unwind_syms: bt
+ ...
+
+ The test-case expects the backtrace command to trigger remote communication,
+ which then should result in a "Remote connection closed" or similar.
+
+ However, no remote communication is triggered, because we hit the "Check that
+ this frame is unwindable" case in get_prev_frame_always_1.
+
+ We don't hit this problem in the kill_pid_of=inferior case, because there we
+ run to main before doing the backtrace.
+
+ Fix this by doing the same in the kill_pid_of=server case.
+
+ Tested on x86_64-linux.
+
+2021-09-18 Tom de Vries <tdevries@suse.de>
+
+ [gdb/ada] Handle artificial local symbols
+ With current master and gcc 7.5.0/8.5.0, we have this timeout:
+ ...
+ (gdb) print s^M
+ Multiple matches for s^M
+ [0] cancel^M
+ [1] s at src/gdb/testsuite/gdb.ada/interface/foo.adb:20^M
+ [2] s at src/gdb/testsuite/gdb.ada/interface/foo.adb:?^M
+ > FAIL: gdb.ada/interface.exp: print s (timeout)
+ ...
+
+ [ The FAIL doesn't reproduce with gcc 9.3.1. This difference in
+ behaviour bisects to gcc commit d70ba0c10de.
+
+ The FAIL with earlier gcc bisects to gdb commit ba8694b650b. ]
+
+ The FAIL is caused by gcc generating this debug info describing a named
+ artificial variable:
+ ...
+ <2><1204>: Abbrev Number: 31 (DW_TAG_variable)
+ <1205> DW_AT_name : s.14
+ <1209> DW_AT_type : <0x1213>
+ <120d> DW_AT_artificial : 1
+ <120d> DW_AT_location : 5 byte block: 91 e0 7d 23 18 \
+ (DW_OP_fbreg: -288; DW_OP_plus_uconst: 24)
+ ...
+
+ An easy way to fix this would be to simply not put named artificial variables
+ into the symbol table. However, that causes regressions for Ada. It relies
+ on being able to get the value from such variables, using a named reference.
+
+ Fix this instead by marking the symbol as artificial, and:
+ - ignoring such symbols in ada_resolve_variable, which fixes the FAIL
+ - ignoring such ada symbols in do_print_variable_and_value, which prevents
+ them from showing up in "info locals"
+
+ Note that a fix for the latter was submitted here (
+ https://sourceware.org/pipermail/gdb-patches/2008-January/054994.html ), and
+ this patch borrows from it.
+
+ Tested on x86_64-linux.
+
+ Co-Authored-By: Joel Brobecker <brobecker@adacore.com>
+
+ Bug: https://sourceware.org/bugzilla/show_bug.cgi?id=28180
+
+2021-09-18 GDB Administrator <gdbadmin@sourceware.org>
+
+ Automatic date update in version.in
+
+2021-09-17 Alan Modra <amodra@gmail.com>
+
+ PR28149 part 2, purge generated line info
+ Mixing compiler generated line info with gas generated line info is
+ generally just confusing. Also .loc directives with non-zero view
+ fields might reference a previous .loc. It becomes a little more
+ tricky to locate that previous .loc if there might be gas generated
+ line info present too. Mind you, we turn off gas generation of line
+ info on seeing compiler generated line info, so any reference back
+ won't hit gas generated line info. At least, if the view info is
+ sane. Unfortunately, gas needs to handle mangled source.
+
+ PR 28149
+ * dwarf2dbg.c (purge_generated_debug): New function.
+ (dwarf2_directive_filename): Call the above.
+ (out_debug_line): Don't segfault after purging.
+ * testsuite/gas/i386/dwarf2-line-4.d: Update expected output.
+ * testsuite/gas/i386/dwarf4-line-1.d: Likewise.
+ * testsuite/gas/i386/dwarf5-line-1.d: Likewise.
+ * testsuite/gas/i386/dwarf5-line-2.d: Likewise.
+
+2021-09-17 Alan Modra <amodra@gmail.com>
+
+ PR28149, debug info with wrong file association
+ gcc-11 and gcc-12 pass -gdwarf-5 to gas, in order to prime gas for
+ DWARF 5 level debug info. Unfortunately it seems there are cases
+ where the compiler does not emit a .file or .loc dwarf debug directive
+ before any machine instructions. (Note that the .file directive
+ typically emitted as the first line of assembly output doesn't count as
+ a dwarf debug directive. The dwarf .file has a file number before the
+ file name string.)
+
+ This patch delays allocation of file numbers for gas generated line
+ debug info until the end of assembly, thus avoiding any clashes with
+ compiler generated file numbers. Two fixes for test case source are
+ necessary; A .loc can't use a file number that hasn't already been
+ specified with .file.
+
+ A followup patch will remove all the gas generated line info on
+ seeing a .file directive.
+
+ PR 28149
+ * dwarf2dbg.c (num_of_auto_assigned): Delete.
+ (current): Update initialisation.
+ (set_or_check_view): Replace all accesses to view with u.view.
+ (dwarf2_consume_line_info): Likewise.
+ (dwarf2_directive_loc): Likewise. Assert that we aren't generating
+ line info.
+ (dwarf2_gen_line_info_1): Don't call set_or_check_view on
+ gas generated line entries.
+ (dwarf2_gen_line_info): Set and track filenames for gas generated
+ line entries. Simplify generation of labels.
+ (get_directory_table_entry): Use filename_cmp when comparing dirs.
+ (do_allocate_filenum): New function.
+ (dwarf2_where): Set u.filename and filenum to -1 for gas generated
+ line entries.
+ (dwarf2_directive_filename): Remove num_of_auto_assigned handling.
+ (process_entries): Update view field access. Call
+ do_allocate_filenum.
+ * dwarf2dbg.h (struct dwarf2_line_info): Add filename field in
+ union aliasing view.
+ * testsuite/gas/i386/dwarf2-line-3.s: Add .file directive.
+ * testsuite/gas/i386/dwarf2-line-4.s: Likewise.
+ * testsuite/gas/i386/dwarf2-line-4.d: Update expected output.
+ * testsuite/gas/i386/dwarf4-line-1.d: Likewise.
+ * testsuite/gas/i386/dwarf5-line-1.d: Likewise.
+ * testsuite/gas/i386/dwarf5-line-2.d: Likewise.
+
+2021-09-17 Alan Modra <amodra@gmail.com>
+
+ [GOLD] PowerPC64 support for sym+addend GOT entries
+ Pass addends to all the GOT handling functions, plus remove some
+ extraneous asserts.
+
+ PR 28192
+ * powerpc.cc (Output_data_got_powerpc): Add addend parameter to
+ all methods creating got entries.
+ (Target_powerpc::Scan::local): Pass reloc addend to got handling
+ functions, and when creating dynamic got relocations.
+ (Target_powerpc::Scan::global): Likewise.
+ (Target_powerpc::Relocate::relocate): Likewise. Remove extraneous
+ assertions.
+
+2021-09-17 Alan Modra <amodra@gmail.com>
+
+ [GOLD] Got_entry::write addends
+ This takes care of writing out GOT entries with addends. The local
+ symbol case was already largely handled, except for passing the addend
+ to tls_offset_for_local which might need the addend in a
+ local_got_offset call. That's needed also in tls_offset_for_global.
+
+ I'm assuming here that GOT entries for function symbols won't ever
+ have addends, and in particular that a GOT entry referencing PLT call
+ stub code won't want an offset into the code.
+
+ PR 28192
+ * output.cc (Output_data_got::Got_entry::write): Include addend
+ in global symbol value. Pass addend to tls_offset_for_*.
+ * powerpc.cc (Target_powerpc::do_tls_offset_for_local): Handle addend.
+ (Target_powerpc::do_tls_offset_for_global): Likewise.
+ * s390.cc (Target_s390::do_tls_offset_for_local): Likewise.
+ (Target_s390::do_tls_offset_for_global): Likewise.
+ * target.h (Target::tls_offset_for_local): Add addend param.
+ (Target::tls_offset_for_global): Likewise.
+ (Target::do_tls_offset_for_local): Likewise.
+ (Target::do_tls_offset_for_global): Likewise.
+
+2021-09-17 Alan Modra <amodra@gmail.com>
+
+ [GOLD] Output_data_got create entry method addends
+ This patch makes all the Output_data_got methods that create new
+ entries accept an optional addend.
+
+ PR 28192
+ * output.h (Output_data_got::add_global): Add optional addend
+ parameter. Update comment. Delete overload without addend.
+ (Output_data_got::add_global_plt): Likewise.
+ (Output_data_got::add_global_tls): Likewise.
+ (Output_data_got::add_global_with_rel): Likewise.
+ (Output_data_got::add_global_pair_with_rel): Likewise.
+ (Output_data_got::add_local_plt): Likewise.
+ (Output_data_got::add_local_tls): Likewise.
+ (Output_data_got::add_local_tls_pair): Likewise.
+ (Output_data_got::reserve_local): Likewise.
+ (Output_data_got::reserve_global): Likewise.
+ (Output_data_got::Got_entry): Include addend in global sym
+ constructor. Delete local sym constructor without addend.
+ * output.cc (Output_data_got::add_global): Add addend param,
+ pass to got handling methods.
+ (Output_data_got::add_global_plt): Likewise.
+ (Output_data_got::add_global_with_rel): Likewise.
+ (Output_data_got::add_global_pair_with_rel): Likewise.
+ (Output_data_got::add_local_plt): Likewise.
+ (Output_data_got::add_local_tls_pair): Likewise.
+ (Output_data_got::reserve_local): Likewise.
+ (Output_data_got::reserve_global): Likewise.
+
+2021-09-17 Alan Modra <amodra@gmail.com>
+
+ [GOLD] Output_data_got tidy
+ Some Output_data_got methods already have support for addends, but
+ were implemented as separate methods. This removes unnecessary code
+ duplication.
+
+ Relobj::local_has_got_offset and others there get a similar treatment.
+ Comments are removed since it should be obvious without a comment, and
+ the existing comments are not precisely what the code does. For
+ example, a local_has_got_offset call without an addend does not return
+ whether the local symbol has *a* GOT offset of type GOT_TYPE, it
+ returns whether there is a GOT entry of type GOT_TYPE for the symbol
+ with addend of zero.
+
+ PR 28192
+ * output.h (Output_data_got::add_local): Make addend optional.
+ (Output_data_got::add_local_with_rel): Likewise.
+ (Output_data_got::add_local_pair_with_rel): Likewise.
+ * output.cc (Output_data_got::add_local): Delete overload
+ without addend.
+ (Output_data_got::add_local_with_rel): Likewise.
+ (Output_data_got::add_local_pair_with_rel): Likewise.
+ * object.h (Relobj::local_has_got_offset): Make addend optional.
+ Delete overload without addend later. Update comment.
+ (Relobj::local_got_offset): Likewise.
+ (Relobj::set_local_got_offset): Likewise.
+
+2021-09-17 Alan Modra <amodra@gmail.com>
+
+ [GOLD] Remove addend from Local_got_entry_key
+ This patch removes the addend from Local_got_entry_key, which is
+ unnecessary now that Got_offset_list has an addend. Note that it
+ might be advantageous to keep the addend in Local_got_entry_key when
+ linking objects containing a large number of section_sym+addend@got
+ relocations. I opted to save some memory by removing the field but
+ left the class there in case we might need to restore {sym,addend}
+ lookup. That's also why this change is split out from the
+ Got_offset_list change.
+
+ PR 28192
+ * object.h (Local_got_entry_key): Delete addend_ field.
+ Adjust constructor and methods to suit.
+ * object.cc (Sized_relobj::do_for_all_local_got_entries):
+ Update key.
+
+2021-09-17 Alan Modra <amodra@gmail.com>
+
+ [GOLD] Got_offset_list: addend field
+ This is the first in a series of patches aimed at supporting GOT
+ entries against symbol plus addend generally for PowerPC64 rather than
+ just section symbol plus addend as gold has currently.
+
+ This patch adds an addend field to Got_offset_list, so that both local
+ and global symbols can have GOT entries with addend.
+
+ PR 28192
+ * object.h (Got_offset_list): Add addend_ field, init in both
+ constructors. Adjust all accessors to suit.
+ (Sized_relobj::do_local_has_got_offset): Adjust to suit.
+ (Sized_relobj::do_local_got_offset): Likewise.
+ (Sized_relobj::do_set_local_got_offset): Likewise.
+ * symtab.h (Symbol::has_got_offset): Add optional addend param.
+ (Symbol::got_offset, Symbol::set_got_offset): Likewise.
+ * incremental.cc (Local_got_offset_visitor::visit): Add unused
+ uint64_t parameter with FIXME.
+ (Global_got_offset_visitor::visit): Add unused uint64_t parameter.
+
+2021-09-17 Henry Castro <hcvcastro@gmail.com>
+
+ Fix segfault when running ia16-elf-gdb
+ "A problem internal to GDB has been detected,
+ further debugging may prove unreliable."
+
+ Segmentation fault
+
+2021-09-17 Nelson Chu <nelson.chu@sifive.com>
+
+ RISC-V: Merged extension string tables and their version tables into one.
+ There are two main reasons for this patch,
+
+ * In the past we had two extension tables, one is used to record all
+ supported extensions in bfd/elfxx-riscv.c, another is used to get the
+ default extension versions in gas/config/tc-riscv.c. It is hard to
+ maintain lots of tables in different files, but in fact we can merge
+ them into just one table. Therefore, we now define many riscv_supported_std*
+ tables, which record names and versions for all supported extensions.
+ We not only use these tables to initialize the riscv_ext_order, but
+ also use them to get the default versions of extensions, and decide if
+ the extensions should be enbaled by default.
+
+ * We add a new filed `default_enable' for the riscv_supported_std* tables,
+ to decide if the extension should be enabled by default. For now if the
+ `default_enable' field of the extension is set to EXT_DEFAULT, then we
+ should enable the extension when the -march and elf architecture attributes
+ are not set. In the future, I suppose the `default_enable' can be set
+ to lots of EXT_<VENDOR>, each vendor can decide to open which extensions,
+ when the target triple of vendor is chosen.
+
+ The elf/linux regression tests of riscv-gnu-toolchain are passed.
+
+ bfd/
+ * elfnn-riscv.c (cpu-riscv.h): Removed sine it is included in
+ bfd/elfxx-riscv.h.
+ (riscv_merge_std_ext): Updated since the field of rpe is changed.
+ * elfxx-riscv.c (cpu-riscv.h): Removed.
+ (riscv_implicit_subsets): Added implicit extensions for g.
+ (struct riscv_supported_ext): Used to be riscv_ext_version. Moved
+ from gas/config/tc-riscv.c, and added new field `default_enable' to
+ decide if the extension should be enabled by default.
+ (EXT_DEFAULT): Defined for `default_enable' field.
+ (riscv_supported_std_ext): It used to return the supported standard
+ architecture string, but now we move ext_version_table from
+ gas/config/tc-riscv.c to here, and rename it to riscv_supported_std_ext.
+ Currently we not only use the table to initialize riscv_ext_order, but
+ also get the default versions of extensions, and decide if the extensions
+ should be enbaled by default.
+ (riscv_supported_std_z_ext): Likewise, but is used for z* extensions.
+ (riscv_supported_std_s_ext): Likewise, but is used for s* extensions.
+ (riscv_supported_std_h_ext): Likewise, but is used for h* extensions.
+ (riscv_supported_std_zxm_ext): Likewise, but is used for zxm* extensions.
+ (riscv_all_supported_ext): Includes all supported extension tables.
+ (riscv_known_prefixed_ext): Updated.
+ (riscv_valid_prefixed_ext): Updated.
+ (riscv_init_ext_order): Init the riscv_ext_order table according to
+ riscv_supported_std_ext.
+ (riscv_get_default_ext_version): Moved from gas/config/tc-riscv.c.
+ Get the versions of extensions from riscv_supported_std* tables.
+ (riscv_parse_add_subset): Updated.
+ (riscv_parse_std_ext): Updated.
+ (riscv_set_default_arch): Set the default subset list according to
+ the default_enable field of riscv_supported_*ext tables.
+ (riscv_parse_subset): If the input ARCH is NULL, then we call
+ riscv_set_default_arch to set the default subset list.
+ * elfxx-riscv.h (cpu-riscv.h): Included.
+ (riscv_parse_subset_t): Removed get_default_version field, and added
+ isa_spec field to replace it.
+ (extern riscv_supported_std_ext): Removed.
+ gas/
+ * (bfd/cpu-riscv.h): Removed.
+ (struct riscv_ext_version): Renamed and moved to bfd/elfxx-riscv.c.
+ (ext_version_table): Likewise.
+ (riscv_get_default_ext_version): Likewise.
+ (ext_version_hash): Removed.
+ (init_ext_version_hash): Removed.
+ (riscv_set_arch): Updated since the field of rps is changed. Besides,
+ report error when the architecture string is empty.
+ (riscv_after_parse_args): Updated.
+
+2021-09-17 GDB Administrator <gdbadmin@sourceware.org>
+
+ Automatic date update in version.in
+
+2021-09-16 Tom de Vries <tdevries@suse.de>
+
+ [gdb/testsuite] Fix interrupted sleep in multi-threaded test-cases
+ When running test-case gdb.threads/continue-pending-status.exp with native, I
+ have:
+ ...
+ (gdb) continue^M
+ Continuing.^M
+ PASS: gdb.threads/continue-pending-status.exp: attempt 0: continue for ctrl-c
+ ^C^M
+ Thread 1 "continue-pendin" received signal SIGINT, Interrupt.^M
+ [Switching to Thread 0x7ffff7fc4740 (LWP 1276)]^M
+ 0x00007ffff758e4c0 in __GI___nanosleep () at nanosleep.c:27^M
+ 27 return SYSCALL_CANCEL (nanosleep, requested_time, remaining);^M
+ (gdb) PASS: gdb.threads/continue-pending-status.exp: attempt 0: caught interrupt
+ ...
+ but with target board unix/-m32, I run into:
+ ...
+ (gdb) continue^M
+ Continuing.^M
+ PASS: gdb.threads/continue-pending-status.exp: attempt 0: continue for ctrl-c
+ [Thread 0xf74aeb40 (LWP 31957) exited]^M
+ [Thread 0xf7cafb40 (LWP 31956) exited]^M
+ [Inferior 1 (process 31952) exited normally]^M
+ (gdb) Quit^M
+ ...
+
+ The problem is that the sleep (300) call at the end of main is interrupted,
+ which causes the inferior to exit before the ctrl-c can be send.
+
+ This problem is described at "Interrupted System Calls" in the docs, and the
+ suggested solution (using a sleep loop) indeed fixes the problem.
+
+ Fix this instead using the more prevalent:
+ ...
+ alarm (300);
+ ...
+ while (1) sleep (1);
+ ...
+ which is roughly equivalent because the sleep is called at the end of main,
+ but slightly better because it guards against hangs from the start rather than
+ from the end of main.
+
+ Likewise in gdb.base/watch_thread_num.exp.
+
+ Likewise in gdb.btrace/enable-running.exp, but use the sleep loop there,
+ because the sleep is not called at the end of main.
+
+ Tested on x86_64-linux.
+
+2021-09-16 Mike Frysinger <vapier@gentoo.org>
+
+ gdb: manual: fix werrors typo
+
+2021-09-16 GDB Administrator <gdbadmin@sourceware.org>
+
+ Automatic date update in version.in
+
+2021-09-15 Tom de Vries <tdevries@suse.de>
+
+ [gdb/testsuite] Use function_range in gdb.dwarf2/dw2-abs-hi-pc.exp
+ When I run test-case gdb.dwarf2/dw2-abs-hi-pc.exp with gcc, we have:
+ ...
+ (gdb) break hello^M
+ Breakpoint 1 at 0x4004c0: file dw2-abs-hi-pc-hello.c, line 24.^M
+ (gdb) PASS: gdb.dwarf2/dw2-abs-hi-pc.exp: break hello
+ ...
+ but with clang, I run into:
+ ...
+ (gdb) break hello^M
+ Breakpoint 1 at 0x4004e4^M
+ (gdb) FAIL: gdb.dwarf2/dw2-abs-hi-pc.exp: break hello
+ ...
+
+ The problem is that the CU and function both have an empty address range:
+ ...
+ <0><d2>: Abbrev Number: 1 (DW_TAG_compile_unit)
+ <108> DW_AT_name : dw2-abs-hi-pc-hello.c
+ <123> DW_AT_low_pc : 0x4004e0
+ <127> DW_AT_high_pc : 0x4004e0
+ <1><12f>: Abbrev Number: 2 (DW_TAG_subprogram)
+ <131> DW_AT_name : hello
+ <13a> DW_AT_low_pc : 0x4004e0
+ <13e> DW_AT_high_pc : 0x4004e0
+ ...
+
+ The address ranges are set like this in dw2-abs-hi-pc-hello-dbg.S:
+ ...
+ .4byte .hello_start /* DW_AT_low_pc */
+ .4byte .hello_end /* DW_AT_high_pc */
+ ...
+ where the labels refer to dw2-abs-hi-pc-hello.c:
+ ...
+ extern int v;
+
+ asm (".hello_start: .globl .hello_start\n");
+ void
+ hello (void)
+ {
+ asm (".hello0: .globl .hello0\n");
+ v++;
+ asm (".hello1: .globl .hello1\n");
+ }
+ asm (".hello_end: .globl .hello_end\n");
+ ...
+
+ Using asm labels in global scope is a known source of problems, as explained
+ in the comment of proc function_range in gdb/testsuite/lib/dwarf.exp.
+
+ Fix this by using function_range instead.
+
+ Tested on x86_64-linux with gcc and clang-7 and clang-12.
+
+2021-09-15 Claudiu Zissulescu <claziss@synopsys.com>
+
+ arc: Fix got-weak linker test
+ Use regular expressions to fix the got-weak linker test.
+
+ ld/
+ * testsuite/got-weak.d: Update test.
+
+2021-09-15 Andrew Burgess <andrew.burgess@embecosm.com>
+
+ bfd: fix incorrect type used in sizeof
+ Noticed in passing that we used 'sizeof (char **)' when calculating
+ the size of a list of 'char *' pointers. Of course, this isn't really
+ going to make a difference anywhere, but we may as well be correct.
+
+ There should be no user visible changes after this commit.
+
+ bfd/ChangeLog:
+
+ * archures.c (bfd_arch_list): Use 'char *' instead of 'char **'
+ when calculating space for a string list.
+
+2021-09-15 Tom de Vries <tdevries@suse.de>
+
+ [gdb/doc] Fix typo in maint selftest entry
+ Fix typo "will by" -> "will be".
+
+2021-09-15 Tom de Vries <tdevries@suse.de>
+
+ [bfd] Ensure unique printable names for bfd archs
+ Remove duplicate entry in bfd_ft32_arch and bfd_rx_arch.
+
+ Fix printable name for bfd_mach_n1: "nh1" -> "n1".
+
+ PR 28336
+ * cpu-ft32.c (arch_info_struct): Remove "ft32" entry.
+ * cpu-rx.c (arch_info_struct): Remove "rx" entry.
+ * cpu-nds32.c (bfd_nds32_arch): Fix printable name for bfd_mach_n1
+ entry.
+
+2021-09-15 Alan Modra <amodra@gmail.com>
+
+ PR28328, dlltool ice
+ PR 28328
+ * archive.c (bfd_ar_hdr_from_filesystem): Don't use bfd_set_input_error
+ here, our caller will do that.
+
+2021-09-15 GDB Administrator <gdbadmin@sourceware.org>
+
+ Automatic date update in version.in
+
+2021-09-14 Tom de Vries <tdevries@suse.de>
+
+ [gdb/testsuite] Fix gdb_load_no_complaints with gnu-debuglink
+ When running test-case gdb.dwarf2/dw2-ranges-psym-warning.exp with target
+ board gnu-debuglink I run into:
+ ...
+ (gdb) file dw2-ranges-psym-warning^M
+ Reading symbols from dw2-ranges-psym-warning...^M
+ Reading symbols from .debug/dw2-ranges-psym-warning.debug...^M
+ (gdb) FAIL: gdb.dwarf2/dw2-ranges-psym-warning.exp: No complaints
+ ...
+
+ Fix this by updating the regexp in gdb_load_no_complaints.
+
+ Tested on x86_64-linux.
+
+2021-09-14 Tom de Vries <tdevries@suse.de>
+
+ [gdb/symtab] Fix function range handling in psymtabs
+ Consider the test-case from this patch.
+
+ We run into:
+ ...
+ (gdb) PASS: gdb.dwarf2/dw2-ranges-psym-warning.exp: continue
+ bt^M
+ warning: (Internal error: pc 0x4004b6 in read in psymtab, but not in symtab.)^M
+ ^M
+ warning: (Internal error: pc 0x4004b6 in read in psymtab, but not in symtab.)^M
+ ^M
+ warning: (Internal error: pc 0x4004b6 in read in psymtab, but not in symtab.)^M
+ ^M
+ warning: (Internal error: pc 0x4004b6 in read in psymtab, but not in symtab.)^M
+ ^M
+ warning: (Internal error: pc 0x4004b6 in read in psymtab, but not in symtab.)^M
+ ^M
+ warning: (Internal error: pc 0x4004b6 in read in psymtab, but not in symtab.)^M
+ ^M
+ read in psymtab, but not in symtab.)^M
+ ^M
+ )^M
+ (gdb) FAIL: gdb.dwarf2/dw2-ranges-psym-warning.exp: bt
+ ...
+
+ This happens as follows.
+
+ The function foo:
+ ...
+ <1><31>: Abbrev Number: 4 (DW_TAG_subprogram)
+ <33> DW_AT_name : foo
+ <37> DW_AT_ranges : 0x0
+ ...
+ has these ranges:
+ ...
+ 00000000 00000000004004c1 00000000004004d2
+ 00000000 00000000004004ae 00000000004004af
+ 00000000 <End of list>
+ ...
+ which have a hole at at [0x4004af,0x4004c1).
+
+ However, the address map of the partial symtabs incorrectly maps addresses
+ in the hole (such as 0x4004b6 in the backtrace) to the foo CU.
+
+ The address map of the full symbol table of the foo CU however does not
+ contain the addresses in the hole, which is what the warning / internal error
+ complains about.
+
+ Fix this by making sure that ranges of functions are read correctly.
+
+ The patch adds a bit to struct partial_die_info, in this hole (shown for
+ x86_64-linux):
+ ...
+ /* 11: 7 | 4 */ unsigned int canonical_name : 1;
+ /* XXX 4-byte hole */
+ /* 16 | 8 */ const char *raw_name;
+ ...
+ So there's no increase in size for 64-bit, but AFAIU there will be an increase
+ for 32-bit.
+
+ Tested on x86_64-linux.
+
+ gdb/ChangeLog:
+
+ 2021-08-10 Tom de Vries <tdevries@suse.de>
+
+ PR symtab/28200
+ * dwarf2/read.c (struct partial_die_info): Add has_range_info and
+ range_offset field.
+ (add_partial_subprogram): Handle pdi->has_range_info.
+ (partial_die_info::read): Set pdi->has_range_info.
+
+ gdb/testsuite/ChangeLog:
+
+ 2021-08-10 Tom de Vries <tdevries@suse.de>
+
+ PR symtab/28200
+ * gdb.dwarf2/dw2-ranges-psym-warning-main.c: New test.
+ * gdb.dwarf2/dw2-ranges-psym-warning.c: New test.
+ * gdb.dwarf2/dw2-ranges-psym-warning.exp: New file.
+
+2021-09-14 Tom de Vries <tdevries@suse.de>
+
+ [gdb/symtab] Fix CU list in .debug_names for dummy CUs
+ With current trunk and target board cc-with-debug-names we have:
+ ...
+ (gdb) file dw2-ranges-psym^M
+ Reading symbols from dw2-ranges-psym...^M
+ warning: Section .debug_names in dw2-ranges-psym has abbreviation_table of \
+ size 1 vs. written as 28, ignoring .debug_names.^M
+ (gdb) set complaints 0^M
+ (gdb) FAIL: gdb.dwarf2/dw2-ranges-psym.exp: No complaints
+ ...
+
+ The executable has 8 compilation units:
+ ...
+ $ readelf -wi dw2-ranges-psym | grep @
+ Compilation Unit @ offset 0x0:
+ Compilation Unit @ offset 0x2e:
+ Compilation Unit @ offset 0xa5:
+ Compilation Unit @ offset 0xc7:
+ Compilation Unit @ offset 0xd2:
+ Compilation Unit @ offset 0x145:
+ Compilation Unit @ offset 0x150:
+ Compilation Unit @ offset 0x308:
+ ...
+ of which the ones at 0xc7 and 0x145 are dummy CUs (that is, they do not
+ contain a single DIE), which were added by recent commit 5ef670d81fd
+ "[gdb/testsuite] Add dummy start and end CUs in dwarf assembly".
+
+ The .debug_names section contains this CU table:
+ ...
+ [ 0] 0x0
+ [ 1] 0x2e
+ [ 2] 0xa5
+ [ 3] 0xd2
+ [ 4] 0x150
+ [ 5] 0x308
+ [ 6] 0x1
+ [ 7] 0x0
+ ...
+ The last two entries are incorrect, and the entries for the dummy CUs are
+ missing.
+
+ The last two entries are incorrect because here in write_debug_names we write
+ the dimension of the CU list as 8:
+ ...
+ /* comp_unit_count - The number of CUs in the CU list. */
+ header.append_uint (4, dwarf5_byte_order,
+ per_objfile->per_bfd->all_comp_units.size ()
+ - per_objfile->per_bfd->tu_stats.nr_tus);
+ ...
+ while the actual dimension of the CU list is 6.
+
+ The discrepancy is caused by this code which skips the dummy CUs:
+ ...
+ for (int i = 0; i < per_objfile->per_bfd->all_comp_units.size (); ++i)
+ {
+ ...
+ /* CU of a shared file from 'dwz -m' may be unused by this main
+ file. It may be referenced from a local scope but in such
+ case it does not need to be present in .debug_names. */
+ if (psymtab == NULL)
+ continue;
+ ...
+ because they have a null partial symtab.
+
+ We can fix this by writing the actual dimension of the CU list, but that still
+ leaves the dummy CUs out of the CU list. The purpose of having these is to
+ delimit the end of preceding CUs.
+
+ So, fix this by:
+ - removing the code that skips the dummy CUs (note that the same change
+ was done for .gdb_index in commit efba5c2319d '[gdb/symtab] Handle PU
+ without import in "save gdb-index"'.
+ - verifying that all units are represented in the CU/TU lists
+ - using the actual CU list size when writing the dimension of the CU list
+ (and likewise for the TU list).
+
+ Tested on x86_64-linux with native and target board cc-with-debug-names.
+
+ Bug: https://sourceware.org/bugzilla/show_bug.cgi?id=28261
+
+2021-09-14 Tom de Vries <tdevries@suse.de>
+
+ [gdb/testsuite] Generate .debug_aranges in gdb.dwarf2/locexpr-data-member-location.exp
+ When running test-case gdb.dwarf2/locexpr-data-member-location.exp with target
+ board cc-with-debug-names, all tests pass but we run into PR28261:
+ ...
+ (gdb) run ^M
+ Starting program: locexpr-data-member-location ^M
+ warning: Section .debug_names in locexpr-data-member-location-lib.so has \
+ abbreviation_table of size 1 vs. written as 37, ignoring .debug_names.^M
+ ...
+
+ Using a patch that fixes PR28261, the warning is gone, but we run into:
+ ...
+ FAIL: gdb.dwarf2/locexpr-data-member-location.exp: step into foo
+ ...
+
+ This is due a missing .debug_aranges contribution for the CU declared in
+ gdb.dwarf2/locexpr-data-member-location.exp.
+
+ Fix this by adding the missing .debug_aranges contribution.
+
+ Tested on x86_64-linux.
+
+2021-09-14 Claudiu Zissulescu <claziss@synopsys.com>
+
+ arc: Fix potential invalid pointer access when fixing got symbols.
+ When statically linking, it can arrive to an undefined weak symbol of
+ which its value cannot be determined. However, we are having pieces of
+ code which doesn't take this situation into account, leading to access
+ a structure which may not be initialized. Fix this situation and add a
+ test.
+
+ bfd/
+ xxxx-xx-xx Cupertino Miranda <cmiranda@synopsys.com>
+ Claudiu Zissulescu <claziss@synopsys.com>
+
+ * arc-got.h (arc_static_sym_data): New structure.
+ (get_static_sym_data): New function.
+ (relocate_fix_got_relocs_for_got_info): Move the computation fo
+ symbol value and section to above introduced function, and use
+ this new function.
+
+ ld/testsuite/
+ xxxx-xx-xx Claudiu Zissulescu <claziss@synopsys.com>
+
+ * ld-arc/got-weak.d: New file.
+ * ld-arc/got-weak.s: Likewise.
+
+
+ fix
+
+2021-09-14 Mike Frysinger <vapier@gentoo.org>
+
+ sim: bfin: add support for SDL2
+ This probably should have been ported long ago, but better late than
+ never. We keep support for both versions for now since both projects
+ tend to have long lifetimes. Maybe consider dropping SDL1 in another
+ ten years.
+
+2021-09-14 GDB Administrator <gdbadmin@sourceware.org>
+
+ Automatic date update in version.in
+
+2021-09-14 Tom Tromey <tom@tromey.com>
+
+ Remove use of __CYGNUSCLIB__
+ I found a check of __CYGNUSCLIB__ in dbxread.c. I think this is dead
+ code. This patch removes it.
+
+2021-09-13 Tom de Vries <tdevries@suse.de>
+
+ [gdb/testsuite] Check for valid test name
+ When running gdb.base/batch-exit-status.exp I noticed that the test name
+ contains a newline:
+ ...
+ PASS: gdb.base/batch-exit-status.exp: : No such file or directory\.^M
+ : No such file or directory\.: [lindex $result 2] == 0
+ ...
+
+ Check for this in ::CheckTestNames::check, such that we have a warning:
+ ...
+ PASS: gdb.base/batch-exit-status.exp: : No such file or directory\.^M
+ : No such file or directory\.: [lindex $result 2] == 0
+ WARNING: Newline in test name
+ ...
+
+ Tested on x86_64-linux.
+
+2021-09-13 Tom de Vries <tdevries@suse.de>
+
+ [gdb/tdep] Fix exec check in gdb_print_insn_arm
+ With a gdb build with --enable-targets=all we run into a KFAIL:
+ ...
+ KFAIL: gdb.gdb/unittest.exp: executable loaded: maintenance selftest, \
+ failed none (PRMS: gdb/27891)
+ ...
+ due to:
+ ...
+ Running selftest print_one_insn.^M
+ Self test failed: arch armv8.1-m.main: self-test failed at \
+ disasm-selftests.c:165^M
+ ...
+
+ The test fails because we expect disassembling of one arm insn to consume 4
+ bytes and produce (using verbose = true in disasm-selftests.c):
+ ...
+ arm mov r0, #0
+ ...
+ but instead the disassembler uses thumb mode and only consumes 2
+ bytes and produces:
+ ...
+ arm movs r0, r0
+ ...
+
+ The failure does not show up in the "no executable loaded" variant because
+ this code in gdb_print_insn_arm isn't triggered:
+ ...
+ if (current_program_space->exec_bfd () != NULL)
+ info->flags |= USER_SPECIFIED_MACHINE_TYPE;
+ ...
+ and consequently we do this in print_insn:
+ ...
+ if ((info->flags & USER_SPECIFIED_MACHINE_TYPE) == 0)
+ info->mach = bfd_mach_arm_unknown;
+ ...
+ and don't set force_thumb to true in select_arm_features.
+
+ The code in gdb_print_insn_arm makes the assumption that the disassembly
+ architecture matches the exec architecture, which in this case is incorrect,
+ because the exec architecture is x86_64, and the disassembly architecture is
+ armv8.1-m.main. Fix that by explicitly checking it:
+ ...
+ if (current_program_space->exec_bfd () != NULL
+ && (current_program_space->exec_bfd ()->arch_info
+ == gdbarch_bfd_arch_info (gdbarch)))
+ ...
+
+ This fixes the print_one_insn failure, so remove the KFAIL.
+
+ Tested on x86_64-linux.
+
+ Bug: https://sourceware.org/bugzilla/show_bug.cgi?id=27891
+
+2021-09-13 Tom de Vries <tdevries@suse.de>
+
+ [gdb/tdep] Reset force_thumb in parse_arm_disassembler_options
+ With a gdb build with --enable-targets=all, we have 2 arch-specific failures
+ in selftest print_one_insn:
+ ...
+ $ gdb -q -batch a.out -ex "maint selftest print_one_insn" 2>&1 \
+ | grep "Self test failed: arch "
+ Self test failed: arch armv8.1-m.main: self-test failed at \
+ disasm-selftests.c:165
+ Self test failed: arch arm_any: self-test failed at disasm-selftests.c:165
+ $
+ ...
+
+ During the first failed test, force_thumb is set to true, and remains so until
+ and during the second test, which causes the second failure.
+
+ Fix this by resetting force_thumb to false in parse_arm_disassembler_options,
+ such that we get just one failure:
+ ...
+ $ gdb -q -batch a.out -ex "maint selftest print_one_insn" 2>&1 \
+ | grep "Self test failed: arch "
+ Self test failed: arch armv8.1-m.main: self-test failed at \
+ disasm-selftests.c:165
+ $
+ ...
+
+ Tested on x86_64-linux.
+
+2021-09-13 Tom Tromey <tromey@adacore.com>
+
+ Fix no-Python build
+ A build without Python will currently fail, because
+ selftests::test_python uses gdb_python_initialized, which is only
+ conditionally defined.
+
+ This patch fixes the build by making test_python also be conditionally
+ defined. I chose this approach because the selftest will fail if
+ Python is not enabled, so it didn't seem useful to leave it defined.
+
+2021-09-13 Nelson Chu <nelson.chu@sifive.com>
+
+ RISC-V: Update the assembler insn testcase.
+ Since the 0x57 is preserved for the vadd.vv instruction in the integration
+ branch, remove it to make sure the testcase can work.
+
+ gas/
+ * testsuite/gas/riscv/insn.d: Remove 0x57 since it is preserved
+ for vadd.vv instruction.
+ * testsuite/gas/riscv/insn.s: Likewise.
+
+2021-09-13 Jan Beulich <jbeulich@suse.com>
+
+ MIPS: don't use get_symbol_name() for section parsing. With s_change_section() later calling obj_elf_section(), it seems better to pre-parse the section name by the same function that will be used there. This way no differences in what is accepted will result.
+ gas * config/tc-mips.c (s_change_section): Use obj_elf_section_name to
+ parse the section name.
+
+ ia64: don't use get_symbol_name() for section parsing. With cross_section() later calling obj_elf_section(), it seems better to pre-parse the section name by the same function that will be used there. This way no differences in what is accepted will result.
+ gas * config/tc-ia64.c (cross_section): Use obj_elf_section_name to
+ parse the section name.
+
+2021-09-13 Tom de Vries <tdevries@suse.de>
+
+ [gdb/testsuite] Fix gdb.gdb/selftest.exp
+ With a gdb build with CFLAGS "-O2 -g -flto=auto", I run into:
+ ...
+ #7 gdb_main (args=0x7fffffffd220) at src/gdb/main.c:1368^M
+ #8 main (argc=<optimized out>, argv=<optimized out>) at src/gdb/gdb.c:32^M
+ (gdb) FAIL: gdb.gdb/selftest.exp: backtrace through signal handler
+ ...
+ which means that this regexp in proc test_with_self fails:
+ ...
+ -re "#0.*(read|poll).*in main \\(.*\\) at .*gdb\\.c.*$gdb_prompt $" {
+ ...
+
+ The problem is that gdb_main has been inlined into main, and consequently the
+ backtrace uses:
+ ...
+ #x <fn> ...
+ ...
+ instead of
+ ...
+ #x <address> in <fn> ...
+ ...
+
+ Fix this by updating the regexp to not require "in" before " main".
+
+ Tested on x86_64-linux.
+
+2021-09-13 Alan Modra <amodra@gmail.com>
+
+ Re: Deprecate a.out support for NetBSD targets
+ * config.bfd: Correct m68-*-*bsd* obsolete target match.
+
+2021-09-13 Tom de Vries <tdevries@suse.de>
+
+ [gdb/testsuite] Fix test name in gdb.base/batch-exit-status.exp
+ When running gdb.base/batch-exit-status.exp I noticed that the test name
+ contains a newline:
+ ...
+ PASS: gdb.base/batch-exit-status.exp: : No such file or directory\.^M
+ : No such file or directory\.: [lindex $result 2] == 0
+ ...
+
+ The mistake is that I passed an output regexp argument to a parameter
+ interpreted as testname prefix. Fix this by passing a testname prefix
+ instead.
+
+ Add support for checking output, to be able to handle the output regexp
+ argument.
+
+ Tested on x86_64-linux.
+
+2021-09-13 GDB Administrator <gdbadmin@sourceware.org>
+
+ Automatic date update in version.in
+
+2021-09-12 Tom de Vries <tdevries@suse.de>
+
+ [gdb/testsuite] Set sysroot earlier in local-board.exp
+ When running test-case gdb.base/batch-exit-status.exp for native, it passes.
+ But with target board cc-with-debug-names, we run into (added missing double
+ quotes for clarity):
+ ...
+ builtin_spawn $build/gdb/testsuite/../../gdb/gdb -nw -nx \
+ -data-directory $build/gdb/testsuite/../data-directory \
+ -iex "set height 0" -iex "set width 0" -ex "set sysroot" -batch ""^M
+ : No such file or directory.^M
+ PASS: gdb.base/batch-exit-status.exp: \
+ : No such file or directory\.: [lindex $result 2] == 0
+ FAIL: gdb.base/batch-exit-status.exp: \
+ : No such file or directory\.: [lindex $result 3] == $expect_status
+ ...
+
+ The difference between the passing and failing case is that with native we
+ have (leaving out set height/width for brevity):
+ ...
+ $ gdb -batch ""; echo $?
+ : No such file or directory.
+ 1
+ ...
+ and with target board cc-with-debug-names:
+ ...
+ $ gdb -ex "set sysroot" -batch ""; echo $?
+ : No such file or directory.
+ 0
+ ...
+
+ The difference is expected. GDB returns the exit status of the last executed
+ command. In the former case that's 'file ""', which fails. In the latter case,
+ that's 'set sysroot', which succeeds.
+
+ Fix this by setting sysroot using -iex instead of -ex in local-board.exp, such
+ that we have the expected:
+ ...
+ $ gdb -iex "set sysroot" -batch ""; echo $?
+ : No such file or directory.
+ 1
+ ...
+
+ Tested on x86_64-linux.
+
+2021-09-12 GDB Administrator <gdbadmin@sourceware.org>
+
+ Automatic date update in version.in
+
+2021-09-11 Mike Frysinger <vapier@gentoo.org>
+
+ sim: run: change help short option to -h
+ It's unclear why -H was picked over the more standard -h, but since
+ -h is still not used, just change -H to -h to match pretty much every
+ other tool in the sourceware tree.
+
+2021-09-11 GDB Administrator <gdbadmin@sourceware.org>
+
+ Automatic date update in version.in
+
+2021-09-10 Tom de Vries <tdevries@suse.de>
+
+ [gdb/testsuite] Reimplement gdb.gdb/python-selftest.exp as unittest
+ The test-case gdb.gdb/python-selftest.exp:
+ - patches the gdb_python_initialized variable in gdb to 0
+ - checks that the output of a python command is "Python not initialized"
+
+ Reimplement gdb.gdb/python-selftest.exp as unittest, using:
+ - execute_command_to_string to capture the output
+ - try/catch to catch the "Python not initialized" exception.
+
+ Tested on x86_64-linux.
+
+2021-09-10 Tom de Vries <tdevries@suse.de>
+
+ [gdb/testsuite] Fix DUPLICATE in gdb.base/global-var-nested-by-dso.exp
+ Fix DUPLICATE in gdb.base/global-var-nested-by-dso.exp by naming commands more
+ uniquely.
+
+2021-09-10 Tom de Vries <tdevries@suse.de>
+
+ [gdb/testsuite] Fix DUPLICATE in gdb.base/skip-solib.exp
+ Fix DUPLICATE in gdb.base/skip-solib.exp by using with_test_prefix.
+
+ Also fix indentation style and long lines, remove outdated question/answer
+ bits, and use multi_line.
+
+2021-09-10 Tom de Vries <tdevries@suse.de>
+
+ [gdb/testsuite] Fix handling of nr_args < 3 in mi_gdb_test
+ The documentation of mi_gdb_test states that the command, pattern and message
+ arguments are mandatory:
+ ...
+ # mi_gdb_test COMMAND PATTERN MESSAGE [IPATTERN] -- send a command to gdb;
+ # test the result.
+ ...
+
+ However, this is not checked, and when mi_gdb_test is called with less than 3
+ arguments, it passes or fails silently.
+
+ Fix this by using the following semantics:
+ - if there are 1 or 2 arguments, use the command as the message.
+ - if there is 1 argument, use ".*" as the pattern.
+ - if there are no or too much arguments, error out.
+
+ Fix a PATH issue in gdb.mi/mi-logging.exp, introduced by using the command as
+ message. Fix a few other trivial-looking FAILs.
+
+ There are 11 less trivial-looking FAILs left in gdb.mi in test-cases:
+ - mi-nsmoribund.exp
+ - mi-breakpoint-changed.exp
+ - mi-break.exp.
+
+ Tested on x86_64-linux.
+
+2021-09-10 Tom de Vries <tdevries@suse.de>
+
+ [gdb/testsuite] Add string_list_to_regexp
+ A regexp pattern with escapes like this is hard to read:
+ ...
+ set re "~\"\[$\]$decimal = 1\\\\n\"\r\n\\^done"
+ ...
+
+ We can make it more readable by spacing out parts (which allows us to also use
+ the curly braces where that's convenient):
+ ...
+ set re [list "~" {"} {[$]} $decimal " = 1" "\\\\" "n" {"} "\r\n" "\\^" "done"]
+ set re [join $re ""]
+ ...
+ or by using string_to_regexp:
+ ...
+ set re [list \
+ [string_to_regexp {~"$}] \
+ $decimal \
+ [string_to_regexp " = 1\\n\"\r\n^done"]]
+ set re [join $re ""]
+ ...
+ Note: we have to avoid applying string_to_list to decimal, which is already a
+ regexp.
+
+ Add a proc string_list_to_regexp to make it easy to do both:
+ ...
+ set re [list \
+ [string_list_to_regexp ~ {"} $] \
+ $decimal \
+ [string_list_to_regexp " = 1" \\ n {"} \r\n ^ done]]
+ ...
+
+ Also add a test-case gdb.testsuite/string_to_regexp.exp.
+
+2021-09-10 Tom de Vries <tdevries@suse.de>
+
+ [gdb/testsuite] Handle unrecognized command line option in gdb_compile_test
+ When running the gdb testsuite with gnatmake-4.8, I get many fails of the
+ following form:
+ ...
+ gcc: error: unrecognized command line option '-fgnat-encodings=all'^M
+ gnatmake: "gdb.ada/O2_float_param/foo.adb" compilation error^M
+ compiler exited with status 1
+ compilation failed: gcc ... gdb.ada/O2_float_param/foo.adb
+ gcc: error: unrecognized command line option '-fgnat-encodings=all'
+ gnatmake: "gdb.ada/O2_float_param/foo.adb" compilation error
+ FAIL: gdb.ada/O2_float_param.exp: scenario=all: compilation foo.adb
+ ...
+
+ Fix this by marking the test unsupported instead, such that we have:
+ ...
+ UNSUPPORTED: gdb.ada/O2_float_param.exp: scenario=all: compilation foo.adb \
+ (unsupported option '-fgnat-encodings=all')
+ ...
+
+ Tested on x86_64-linux.
+
+2021-09-10 Alan Modra <amodra@gmail.com>
+
+ PowerPC, sanity check r_offset in relocate_section
+ * elf32-ppc.c (offset_in_range): New function.
+ (ppc_elf_vle_split16): Sanity check r_offset before accessing
+ section contents. Return status.
+ (ppc_elf_relocate_section): Sanity check r_offset before
+ accessing section contents. Don't segfault on NULL howto.
+
+ Re: gas: Use the directory name in .file 0
+ PR gas/28266
+ * testsuite/gas/elf/dwarf-5-file0-2.s: Use %object rather than
+ @object, .4byte instead of .long, and .asciz instead of .string.
+
+2021-09-10 Mike Frysinger <vapier@gentoo.org>
+
+ etc: switch to automake
+ There's no content in here currently, so switching to automake is
+ pretty easy with a stub file.
+
+ etc: rename configure.in to configure.ac
+ The .in name has been deprecated for a long time in favor of .ac.
+
+2021-09-10 H.J. Lu <hjl.tools@gmail.com>
+
+ gas: Use the directory name in .file 0
+ DWARF5 allows .file 0 to take an optional directory name. Set the entry
+ 0 of the directory table to the directory name in .file 0.
+
+ PR gas/28266
+ * dwarf2dbg.c (get_directory_table_entry): Add an argument for
+ the directory name in .file 0 and use it, instead of PWD.
+ (allocate_filenum): Pass NULL to get_directory_table_entry.
+ (allocate_filename_to_slot): Pass the incoming dirname to
+ get_directory_table_entry.
+ * testsuite/gas/elf/dwarf-5-file0-2.d: New file.
+ * testsuite/gas/elf/dwarf-5-file0-2.s: Likewise.
+ * testsuite/gas/elf/elf.exp: Run dwarf-5-file0-2.
+
+2021-09-10 GDB Administrator <gdbadmin@sourceware.org>
+
+ Automatic date update in version.in
+
+2021-09-09 Yoshinori Sato <ysato@users.sourceforge.jp>
+
+ gdb: Enable target rx-*-*linux.
+ I added rx-*-linux in binutils few yaers ago.
+ But missing this changes,
+
+2021-09-09 Tom de Vries <tdevries@suse.de>
+
+ [gdb/testsuite] Fix gdb.base/coredump-filter-build-id.exp with older eu-unstrip
+ On openSUSE Leap 42.3 with eu-unstrip 0.158, we run into:
+ ...
+ (gdb) PASS: gdb.base/coredump-filter-build-id.exp: save corefile
+ First line of eu-unstrip: \
+ 0x400000+0x202000 f4ae8502bd6a14770182382316bc595e9dc6f08b@0x400284 - - [exe]
+ FAIL: gdb.base/coredump-filter-build-id.exp: gcore dumped mapping with build-id
+ ...
+
+ The test expects an actual file name instead of '[exe]', but that only got
+ introduced with eu-unstrip 0.161. Before it printed '[exe]' or '[pie]'.
+
+ Fix this by updating the regexp.
+
+ Tested on x86_64-linux.
+
+2021-09-09 Tom de Vries <tdevries@suse.de>
+
+ [gdb/testsuite] Fix various issues in gdb.mi/mi-sym-info.exp
+ I noticed this failure in gdb.mi/mi-sym-info.exp with gcc-4.8:
+ ...
+ FAIL: gdb.mi/mi-sym-info.exp: -symbol-info-functions --max-results 1 \
+ (unexpected output)
+ ...
+ due to function f2 instead of f3 being listed.
+
+ AFAICT, this is caused by a difference in debug info:
+ ...
+ $ readelf -wi outputs/gdb.mi/mi-sym-info/mi-sym-info1.o \
+ | egrep "DW_AT_name.*: f[1-3]"
+ <72> DW_AT_name : f1
+ <a1> DW_AT_name : f2
+ <d0> DW_AT_name : f3
+ ...
+ vs:
+ ...
+ $ readelf -wi outputs/gdb.mi/mi-sym-info/mi-sym-info1.o \
+ | egrep "DW_AT_name.*: f[1-3]"
+ <f4> DW_AT_name : f3
+ <123> DW_AT_name : f2
+ <152> DW_AT_name : f1
+ ...
+ and the command documentation does not mention an imposed order, so fix this
+ by allowing f2 as well.
+
+ Doing this fix, it made sense to do a refactoring of adding f2_re and f3_re
+ variables, in order to write (?:$f2_re|$f3_re), and I applied the same pattern
+ overall.
+
+ Furthermore, I found a silent FAIL due to calling mi_gdb_proc with 2 args, fix
+ by updating the regexp.
+
+ Then I ran with clang and found another FAIL, fix by updating the regexp.
+
+ Tested on x86_64-linux with gcc-4.8.5, gcc-7.5.0, gcc-11.2.1, clang-7.0.1 and
+ clang-12.0.1.
+
+2021-09-09 Tom de Vries <tdevries@suse.de>
+
+ [gdb/testsuite] Reimplement gdb.gdb/complaints.exp as unittest
+ When building gdb with "-Wall -O2 -g -flto=auto", I run into:
+ ...
+ (gdb) call clear_complaints()^M
+ No symbol "clear_complaints" in current context.^M
+ (gdb) FAIL: gdb.gdb/complaints.exp: clear complaints
+ ...
+
+ The problem is that lto has optimized away the clear_complaints function
+ and consequently the selftest doesn't work.
+
+ Fix this by reimplementing the selftest as a unit test.
+
+ Factor out two new functions:
+ - void
+ execute_fn_to_ui_file (struct ui_file *file, std::function<void(void)> fn);
+ - std::string
+ execute_fn_to_string (std::function<void(void)> fn, bool term_out);
+ and use the latter to capture the complaints output.
+
+ Tested on x86_64-linux.
+
+2021-09-09 Andrew Burgess <andrew.burgess@embecosm.com>
+
+ gdb/python: remove all uses of Py_TPFLAGS_HAVE_ITER
+ Python 2 has a bit flag Py_TPFLAGS_HAVE_ITER which can be passed as
+ part of the tp_flags field when defining a new object type. This flag
+ is not defined in Python 3 and so we define it to 0 in
+ python-internal.h (when IS_PY3K is defined).
+
+ The meaning of this flag is that the object has the fields tp_iter and
+ tp_iternext. Note the use of "has" here, the flag says nothing about
+ the values in those fields, just that the type object has the fields.
+
+ In early versions of Python 2 these fields were no part of the
+ PyTypeObject struct, they were added in version 2.2 (see
+ https://docs.python.org/release/2.3/api/type-structs.html). And so,
+ there could be a some code compiled out there which has a PyTypeObject
+ structure within it that doesn't even have the tp_iter and tp_iternext
+ fields, attempting to access these fields would be undefined
+ behaviour.
+
+ And so Python added the Py_TPFLAGS_HAVE_ITER flag. If the flag is
+ present then Python is free to access the tp_iter and tp_iternext
+ fields.
+
+ If we consider GDB then we always assume that the tp_iter and
+ tp_iternext fields are part of PyTypeObject. If someone was crazy
+ enough to try and compile GDB against Python 2.1 then we'd get lots of
+ build errors saying that we were passing too many fields when
+ initializing PyTypeObject structures. And so, I claim, we can be sure
+ that GDB will always be compiled with a version of Python that has the
+ tp_iter and tp_iternext fields in PyTypeObject.
+
+ Next we can look at the Py_TPFLAGS_DEFAULT flag. In Python 2, each
+ time additional fields are added to PyTypeObject a new Py_TPFLAGS_*
+ flag would be defined to indicate whether those flags are present or
+ not. And, those new flags would be added to Py_TPFLAGS_DEFAULT. And
+ so, in the latest version of Python 2 the Py_TPFLAGS_DEFAULT flag
+ includes Py_TPFLAGS_HAVE_ITER (see
+ https://docs.python.org/2.7/c-api/typeobj.html).
+
+ In GDB we pass Py_TPFLAGS_DEFAULT as part of the tp_flags for all
+ objects we define.
+
+ And so, in this commit, I propose to remove all uses of
+ Py_TPFLAGS_HAVE_ITER from GDB, it's simply not needed.
+
+ There should be no user visible changes after this commit.
+
+2021-09-09 Mike Frysinger <vapier@gentoo.org>
+
+ sim: accept -EB/-EL short options
+ Many GNU tools accept -EB/-EL as short options for selecting big &
+ little endian modes. While the sim has an -E option, it requires
+ spelling out "big" and "little". Adding support for -EB & -EL is
+ thus quite trivial, so lets round it out to be less annoying.
+
+ sim: ppc: drop support for std-config.h overrides
+ Only the ppc arch supports this kind of source file override logic.
+ All the others expose knobs via configure flags, and for some of
+ these, the ppc code does as well. For others, it doesn't make sense
+ to ever change them. Since it's unlikely anyone is using this, drop
+ it all to simplify the code (and to get us a little closer to the
+ common sim code).
+
+ sim: ppc: enable use of gnulib
+ All other sim arches are using this now, so finish up the logic in
+ the ppc arch to enable gnulib usage here too.
+
+ sim: drop old O_NDELAY & FNBLOCK support
+ We use these older names inconsistently in the sim codebase, and time
+ has moved on long ago, so drop support for these non-standard names.
+ POSIX provides O_NONBLOCK for us, so use it everywhere.
+
+2021-09-09 Mike Frysinger <vapier@gentoo.org>
+
+ sim: dv-sockser: enable for mingw targets too
+ We have enough functionality from gnulib now to build sockser on
+ all platforms.
+
+ Non-blocking I/O is supported when F_GETFL/F_SETFL are unavailable,
+ but we can address that in a follow up commit. This mirrors what
+ is done in other places in the sim already.
+
+2021-09-09 Mike Frysinger <vapier@gentoo.org>
+
+ sim: cgen: workaround Windows VOID define
+ The cgen framework provides a "VOID" type for code to use, but this
+ defines ends up conflicting with the standard Windows VOID define.
+ Since they actually define to the same thing ("void"), undef it here
+ to fix the Windows build.
+
+ We might want to reconsider the need for "VOID" in cgen, but that
+ will take larger discussion & coordination with the cgen project.
+
+2021-09-09 Mike Frysinger <vapier@gentoo.org>
+
+ sim: dv-sockser: move sim-main.h include after system includes
+ The sim-main.h header is a bit of a dumping ground. Every arch can
+ (and many do) define all sorts of weird & common names that end up
+ conflicting with system headers. So including it before the system
+ headers sets us up for pain. v850 is a good example of this -- when
+ building for mingw, we see weird failures:
+
+ $ i686-w64-mingw32-gcc ... -c -o dv-sockser.o ../../../../sim/v850/../common/dv-sockser.c
+ In file included from ../../../../sim/v850/sim-main.h:11,
+ from ../../../../sim/v850/../common/dv-sockser.c:24:
+ ../../../../sim/v850/../common/sim-base.h:97:32: error: expected ')' before '->' token
+ 97 | # define STATE_CPU(sd, n) ((sd)->cpu[0])
+ | ^~
+
+ While gcc is unhelpful at first, running it through the preprocessor
+ by hand shows more details:
+
+ $ i686-w64-mingw32-gcc ... -E -dD -o dv-sockser.i ../../../../sim/v850/../common/dv-sockser.c
+ $ i686-w64-mingw32-gcc -c dv-sockser.i
+ In file included from /usr/i686-w64-mingw32/usr/include/minwindef.h:163,
+ from /usr/i686-w64-mingw32/usr/include/windef.h:9,
+ from /usr/i686-w64-mingw32/usr/include/windows.h:69,
+ from /usr/i686-w64-mingw32/usr/include/winsock2.h:23,
+ from ../../gnulib/import/sys/socket.h:684,
+ from ../../gnulib/import/netinet/in.h:43,
+ from ../../../../sim/v850/../common/dv-sockser.c:39:
+ /usr/i686-w64-mingw32/usr/include/winnt.h:4803:25: error: expected ')' before '->' token
+ 4803 | DWORD State;
+ | ^
+ | )
+
+ This is because v850 sets up this common name:
+
+ All of this needs cleaning up someday, but since the dv-sockser code
+ definitely should be fixed in this way, lets do that now and unblock
+ the v850 code.
+
+2021-09-09 Mike Frysinger <vapier@gentoo.org>
+
+ sim: mips: delete unused PSIZE define
+ It's unclear what this define is for as it appears to be unused, and
+ has never been used in the history of the mips sim. Delete it to tidy
+ up, and to fix build errors for Windows targets that have a standard
+ "PSIZE" struct in their system headers. This doesn't show up yet as
+ most sim files don't include many system headers, but enabling sockser
+ code for mingw uncovers the conflict.
+
+ Unfortunately the error produced by gcc is inscrutable, but running
+ it through the preprocessor manually manages to provide a pointer to
+ the underlying issue.
+
+ $ i686-w64-mingw32-gcc ... -c -o dv-sockser.o ../../../../sim/mips/../common/dv-sockser.c
+ <command-line>: error: expected identifier or '(' before numeric constant
+ In file included from /usr/i686-w64-mingw32/usr/include/windows.h:71,
+ from /usr/i686-w64-mingw32/usr/include/winsock2.h:23,
+ from ../../gnulib/import/sys/socket.h:684,
+ from ../../gnulib/import/netinet/in.h:43,
+ from ../../../../sim/mips/../common/dv-sockser.c:39:
+ /usr/i686-w64-mingw32/usr/include/wingdi.h:2934:59: error: unknown type name 'LPSIZE'; did you mean 'LPSIZEL'?
+ 2934 | WINGDIAPI WINBOOL WINAPI GetAspectRatioFilterEx(HDC hdc,LPSIZE lpsize);
+ | ^~~~~~
+ | LPSIZEL
+ ...
+
+ $ i686-w64-mingw32-gcc ... -E -dD -o dv-sockser.i ../../../../sim/mips/../common/dv-sockser.c
+ $ i686-w64-mingw32-gcc -c dv-sockser.i
+ In file included from /usr/i686-w64-mingw32/usr/include/windows.h:69,
+ from /usr/i686-w64-mingw32/usr/include/winsock2.h:23,
+ from ../../gnulib/import/sys/socket.h:684,
+ from ../../gnulib/import/netinet/in.h:43,
+ from ../../../../sim/mips/../common/dv-sockser.c:39:
+ /usr/i686-w64-mingw32/usr/include/windef.h:104:9: error: expected identifier or '(' before numeric constant
+ 104 | } SIZE,*PSIZE,*LPSIZE;
+ | ^~
+
+2021-09-09 Mike Frysinger <vapier@gentoo.org>
+
+ sim: ppc: switch to common warning flags
+ Now that the ppc code has been cleaned up enough to use the same set
+ of warning flags as the common code, delete the ppc-specific configure
+ logic so we can leverage what the common code already defined for us.
+
+2021-09-09 Tom de Vries <tdevries@suse.de>
+
+ sim: ppc: enable -Wpointer-sign warnings
+ When compiling with --enable-werror and CFLAGS="-O0 -g -Wall", we run into:
+ ...
+ src/sim/ppc/hw_memory.c: In function 'hw_memory_init_address':
+ src/sim/ppc/hw_memory.c:204:7: error: pointer targets in passing argument 4 \
+ of 'device_find_integer_array_property' differ in signedness \
+ [-Werror=pointer-sign]
+ &new_chunk->size);
+ ^
+ ...
+
+ Fix these by adding an explicit pointer cast. It's a bit ugly to use APIs
+ based on signed integers to read out unsigned values, but in practice, this
+ is par for the course in the ppc code.
+
+ We already use signed APIs and assign the result to unsigned values a lot:
+ see how device_find_integer_property returns a signed integer (cell), but
+ then assign it to unsigned types. The array APIs are not used that often
+ which is why we don't see many warnings, and we disable warnings when we
+ assign signed integers to unsigned integers in general.
+
+ The dtc/libfdt project (which is the standard in other projects) processes
+ the fdt blob as a series of bytes without any type information. Typing is
+ left to the caller. They have core APIs that read/write bytes, and a few
+ helper functions to cast/convert those bytes to the right value (e.g. u32).
+ In this ppc sim code, the core APIs use signed integers, and the callers
+ convert to unsigned, usually implicitly.
+
+ We could add some core APIs to the ppc sim that deal with raw bytes and then
+ add some helpers to convert to the right type, but that seems like a lot of
+ lifting for what boils down to a cast, and is effectively equivalent to all
+ the implicit assignments we use elsewhere. Long term, a lot of the ppc code
+ should either get converted to existing sim common code, or we should stand
+ up proper APIs in the common code first, or use standard libraries to do all
+ the processing (e.g. libfdt). Either way, this device.c code would all get
+ deleted, and callers (like these hw_*.c files) would get converted. Which
+ is also why we go with a cast rather new (but largely unused) APIs.
+
+2021-09-09 Mike Frysinger <vapier@gentoo.org>
+
+ sim: ppc: enable -Wmissing-declarations & -Wmissing-prototypes
+ This aligns with common code which already uses this flag. We have
+ to add another local prototype to fix the failure, and add another
+ local decl for the SIM_DESC type. Unwinding these will require a
+ lot more work & conversions in the process, so going with the decl
+ for now unblocks the warning unification.
+
+2021-09-09 Mike Frysinger <vapier@gentoo.org>
+
+ sim: microblaze: replace custom basic types with common ones
+ The basic "byte" type conflicts with Windows headers, and we already
+ have common types that provide the right sizes. So replace these with
+ the common ones to avoid issues.
+
+ CC dv-sockser.o
+ In file included from /usr/i686-w64-mingw32/usr/include/wtypes.h:8,
+ from /usr/i686-w64-mingw32/usr/include/winscard.h:10,
+ from /usr/i686-w64-mingw32/usr/include/windows.h:97,
+ from /usr/i686-w64-mingw32/usr/include/winsock2.h:23,
+ from ../../gnulib/import/sys/socket.h:684,
+ from ../../gnulib/import/netinet/in.h:43,
+ from .../build/sim/../../../sim/microblaze/../common/dv-sockser.c:39:
+ /usr/i686-w64-mingw32/usr/include/rpcndr.h:63:25: error: conflicting types for 'byte'; have 'unsigned char'
+ 63 | typedef unsigned char byte;
+ | ^~~~
+ In file included from .../buildsim/../../../sim/microblaze/sim-main.h:21,
+ from .../buildsim/../../../sim/microblaze/../common/dv-sockser.c:24:
+ .../buildsim/../../../sim/microblaze/microblaze.h:94:25: note: previous declaration of 'byte' with type 'byte' {aka 'char'}
+ 94 | typedef char byte;
+ | ^~~~
+ make: *** [Makefile:513: dv-sockser.o] Error 1
+
+2021-09-09 Jim Wilson <jimw@sifive.com>
+
+ RISC-V: Pretty print values formed with lui and addiw.
+ The disassembler has support to pretty print values created by an lui/addi
+ pair, but there is no support for addiw. There is also no support for
+ c.addi and c.addiw. This patch extends the pretty printing support to
+ handle these 3 instructions in addition to addi. Existing testcases serve
+ as tests for the new feature.
+
+ opcodes/
+ * riscv-dis.c (maybe_print_address): New arg wide. Sign extend when
+ wide is true.
+ (print_insn_args): Fix calls to maybe_print_address. Add checks for
+ c.addi, c.addiw, and addiw, and call maybe_print_address for them.
+
+ gas/
+ * testsuite/gas/riscv/insn.d: Update for disassembler change.
+ * testsuite/gas/li32.d, testsuite/gas/li64.d: Likwise.
+ * testsuite/gas/lla64.d: Likewise.
+
+2021-09-09 Mike Frysinger <vapier@gentoo.org>
+
+ sim: ppc: align format string settings with common code
+ This copies logic used in the common sim warning configure code to fix
+ build errors for mingw targets. Turning format warnings on triggers
+ a failure in the debug.c file, so apply a minor fix at the same time.
+
+ sim: ppc: drop unnecessary config includes
+ This file is compiled for the --host & --build system which leads to
+ including the configure generated config.h in both environments.
+ This obviously doesn't work when the two targets don't look alike at
+ all and can cause build failures here (e.g. a mingw host & a linux
+ build). Since we don't actually need any config settings in this
+ very simple file, drop the includes entirely.
+
+2021-09-09 GDB Administrator <gdbadmin@sourceware.org>
+
+ Automatic date update in version.in
+
+2021-09-08 Mike Frysinger <vapier@gentoo.org>
+
+ gnulib: import various network functions
+ Some sim ports use these to provide networking functionality via the
+ dv-sockser module or via direct emulation for a few ports.
+
+ Gdb seems to build just fine still too.
+
+2021-09-08 Tom Tromey <tromey@adacore.com>
+
+ Fix unit test build on Windows
+ Like Tom de Vries' earlier patch to fix the no-CXX_STD_THREAD case in
+ maint.c, this patch fixes a similar problem in
+ parallel-for-selftests.c. This fixes a build failure on Windows.
+
+2021-09-08 Alan Modra <amodra@gmail.com>
+
+ PowerPC64, sanity check r_offset in relocate_section
+ This hardens the powerpc64 linker code transformations.
+
+ * elf64-ppc.c (is_8byte_reloc, offset_in_range): New functions.
+ (ppc64_elf_relocate_section): Sanity check r_offset before
+ accessing section contents for various code transformations.
+
+2021-09-08 Alan Modra <amodra@gmail.com>
+
+ PowerPC64: Avoid useless work on R_PPC64_TPREL34
+ _bfd_elf_ppc_at_tprel_transform doesn't handle prefix instructions,
+ and I'm not inclined to implement code editing for them.
+
+ * elf64-ppc.c (ppc64_elf_relocate_section): Don't attempt tprel
+ transform for R_PPC64_TPREL34.
+
+2021-09-08 Andrew Burgess <andrew.burgess@embecosm.com>
+
+ gdb: make thread_suspend_state::stop_pc optional
+ Currently the stop_pc field of thread_suspect_state is a CORE_ADDR and
+ when we want to indicate that there is no stop_pc available we set
+ this field back to a special value.
+
+ There are actually two special values used, in post_create_inferior
+ the stop_pc is set to 0. This is a little unfortunate, there are
+ plenty of embedded targets where 0 is a valid pc value. The more
+ common special value for stop_pc though, is set in
+ thread_info::set_executing, where the value (~(CORE_ADDR) 0) is used.
+
+ This commit changes things so that the stop_pc is instead a
+ gdb::optional. We can now explicitly reset the field to an
+ uninitialised state, we also have asserts that we don't read the
+ stop_pc when its in an uninitialised state (both in
+ gdbsupport/gdb_optional.h, when compiling with _GLIBCXX_DEBUG
+ defined, and in thread_info::stop_pc).
+
+ One situation where a thread will not have a stop_pc value is when the
+ thread is stopped as a consequence of GDB being in all stop mode, and
+ some other thread stopped at an interesting event. When GDB brings
+ all the other threads to a stop those other threads will not have a
+ stop_pc set (thus avoiding an unnecessary read of the pc register).
+
+ Previously, when GDB passed through handle_one (in infrun.c) the
+ threads executing flag was set to false and the stop_pc field was left
+ unchanged, i.e. it would (previous) have been left as ~0.
+
+ Now, handle_one leaves the stop_pc with no value.
+
+ This caused a problem when we later try to set these threads running
+ again, in proceed() we compare the current pc with the cached stop_pc.
+ If the thread was stopped via handle_one then the stop_pc would have
+ been left as ~0, and the compare (in proceed) would (likely) fail.
+ Now however, this compare tries to read the stop_pc when it has no
+ value and this would trigger an assert.
+
+ To resolve this I've added thread_info::stop_pc_p() which returns true
+ if the thread has a cached stop_pc. We should only ever call
+ thread_info::stop_pc() if we know that there is a cached stop_pc,
+ however, this doesn't mean that every call to thread_info::stop_pc()
+ needs to be guarded with a call to thread_info::stop_pc_p(), in most
+ cases we know that the thread we are looking at stopped due to some
+ interesting event in that thread, and so, we know that the stop_pc is
+ valid.
+
+ After running the testsuite I've seen no other situations where
+ stop_pc is read uninitialised.
+
+ There should be no user visible changes after this commit.
+
+2021-09-08 Tom de Vries <tdevries@suse.de>
+
+ [gdb/build] Fix build with undefined CXX_STD_THREAD
+ When building gdb on openSUSE Leap 42.3, we trigger the case that
+ CXX_STD_THREAD is undefined, and run into:
+ ...
+ gdb/maint.c: In function 'void maintenance_show_worker_threads \
+ (ui_file*, int, cmd_list_element*, const char*)':
+ gdb/maint.c:877:14: error: 'gdb::thread_pool' has not been declared
+ gdb::thread_pool::g_thread_pool->thread_count ());
+ ^
+ Makefile:1647: recipe for target 'maint.o' failed
+ make[1]: *** [maint.o] Error 1
+ ...
+
+ Fix this by handling the undefined CXX_STD_THREAD case in
+ maintenance_show_worker_threads, such that we get:
+ ...
+ $ gdb -q -batch -ex "maint show worker-thread"
+ The number of worker threads GDB can use is 0.
+ ...
+
+ Tested on x86_64-linux.
+
+ Bug: https://sourceware.org/bugzilla/show_bug.cgi?id=28312
+
+2021-09-08 Mike Frysinger <vapier@gentoo.org>
+
+ sim: update configure target list
+ Fix sorting of the list, and update the globs to match the list used
+ in gdb's configure script.
+
+ gdb: cris: enable sim integration
+ The sim side is already ready to go for cris, so wire it up.
+
+ gdb: aarch64: enable sim integration
+ The sim side is already ready to go for aarch64, so wire it up.
+
+ gdb: sim: consolidate configure settings
+ Moving all the sim settings to one section makes it easier to track,
+ and makes it easier to keep it aligned with the sim target tests.
+ The gdb logic was duplicating this when handling different OS targets
+ instead of having a single cpu check. Now it's more obvious that the
+ sim is tied to a cpu and not related to the OS.
+
+2021-09-08 GDB Administrator <gdbadmin@sourceware.org>
+
+ Automatic date update in version.in
+
+2021-09-07 Tom Tromey <tromey@adacore.com>
+
+ Remove unused declaration from gdbserver/win32-low.h
+ I noticed that gdbserver/win32-low.h has an unused declaration. This
+ code was changed a while ago, but this declaration slipped through.
+ This patch removes it. Tested by rebuilding.
+
+2021-09-07 Andrew Burgess <andrew.burgess@embecosm.com>
+
+ gdb: make use of std::string in utils.c
+ Replace some of the manual string management (malloc/free) with
+ std::string when creating commands in utils.c.
+
+ Things are a little bit messy as, creating the prefix commands (using
+ add_basic_prefix_cmd and add_show_prefix_cmd), doesn't copy the doc
+ string, while creating the actual set/show commands (using
+ add_setshow_enum_cmd) does copy the doc string.
+
+ As a result, I have retained the use of xstrprintf when creating the
+ prefix command doc strings, but switched to using std::string when
+ creating the actual set/show commands.
+
+ There should be no user visible changes after this commit.
+
+2021-09-07 Luis Machado <luis.machado@linaro.org>
+
+ Revert: [AArch64] MTE corefile support
+ bfd * elf.c (elfcore_make_memtag_note_section): New function.
+ (elfcore_grok_note): Handle NT_MEMTAG note types.
+
+ binutils* readelf.c (get_note_type): Handle NT_MEMTAG note types.
+
+ include * elf/common.h (NT_MEMTAG): New constant.
+ (NT_MEMTAG_TYPE_AARCH_MTE): New constant.
+
+2021-09-07 Andrew Burgess <andrew.burgess@embecosm.com>
+
+ gdb: use bool instead of int in struct internal_problem
+ Change struct internal_problem (gdb/utils.c) to use bool instead of
+ int, update the 3 static instances of this structure that we create to
+ use true/false instead of 1/0.
+
+ I've also updated the comments on struct internal_problem as the
+ existing comment doesn't seem to be referring to the structure, it
+ talks about returning something, which doesn't make sense in this
+ context.
+
+ There should be no user visible changes after this commit.
+
+2021-09-07 Andrew Burgess <andrew.burgess@embecosm.com>
+
+ gdb: make thread_info::executing private
+ Rename thread_info::executing to thread_info::m_executing, and make it
+ private. Add a new get/set member functions, and convert GDB to make
+ use of these.
+
+ The only real change of interest in this patch is in thread.c where I
+ have deleted the helper function set_executing_thread, and now just
+ use the new set function thread_info::set_executing. However, the old
+ helper function set_executing_thread included some code to reset the
+ thread's stop_pc, so I moved this code into the new function
+ thread_info::set_executing. However, I don't believe there is
+ anywhere that this results in a change of behaviour, previously the
+ executing flag was always set true through a call to
+ set_executing_thread anyway.
+
+2021-09-07 Nick Clifton <nickc@redhat.com>
+
+ Fix an illegal memory access triggered by an atempt to disassemble a corrupt xtensa binary.
+ PR 28305
+ * elf32-xtensa.c (elf_xtensa_do_reloc): Add check for put of range
+ reloc.
+
+2021-09-07 Andrew Burgess <andrew.burgess@embecosm.com>
+
+ gdb/python: new function to add values into GDB's history
+ The guile API has (history-append! <value>) to add values into GDB's
+ history list. There is currently no equivalent in the Python API.
+
+ This commit adds gdb.add_history(<value>) to the Python API, this
+ function takes <value> a gdb.Value (or anything that can be passed to
+ the constructor of gdb.Value), and adds the value it represents to
+ GDB's history list. The index of the newly added value is returned.
+
+2021-09-07 Nick Clifton <nickc@redhat.com>
+
+ Fix illegal memory access triggered by an attempt to disassemble a corrupt RISC-V binary.
+ PR 28303
+ * elfxx-riscv.c (riscv_elf_add_sub_reloc): Add check for out of
+ range relocs.
+
+2021-09-07 Tom de Vries <tdevries@suse.de>
+
+ [gdb/testsuite] Handle internal-error in gdb_unload
+ When reverting commit 5a20fadc841 and using gdb_unload instead of runto "bar"
+ to trigger the internal-error in test-case
+ gdb.dwarf2/locexpr-data-member-location.exp, we run into:
+ ...
+ ERROR: couldn't unload file in $gdb (timeout).
+ ...
+ and the test-case takes about 1 minute.
+
+ Fix this by handling internal-error in gdb_unload, such that we have:
+ ...
+ ERROR: Couldn't unload file in $gdb (GDB internal error).
+ ERROR: Could not resync from internal error (eof)
+ ...
+ within 2 seconds.
+
+ Tested on x86_64-linux.
+
+2021-09-07 Alan Modra <amodra@gmail.com>
+
+ PR28307, segfault in ppc64_elf_toc64_reloc
+ Adds missing bfd_reloc_offset_in_range checks to various relocation
+ special_functions.
+
+ PR 28307
+ * elf32-ppc.c (ppc_elf_addr16_ha_reloc): Range check reloc offset.
+ * elf64-ppc.c (ppc64_elf_ha_reloc, ppc64_elf_brtaken_reloc): Likewise.
+ (ppc64_elf_toc64_reloc, ppc64_elf_prefix_reloc): Likewise.
+
+2021-09-07 GDB Administrator <gdbadmin@sourceware.org>
+
+ Automatic date update in version.in
+
+2021-09-07 Tom de Vries <tdevries@suse.de>
+
+ [gdb/testsuite] Handle internal-error in gdb_run_cmd
+ When reverting commit 5a20fadc841 the test-case
+ gdb.dwarf2/locexpr-data-member-location.exp fails like this:
+ ...
+ FAIL: gdb.dwarf2/locexpr-data-member-location.exp: running to bar in runto \
+ (GDB internal error)
+ ERROR: Could not resync from internal error (eof)
+ ...
+ and takes 1 minute to run.
+
+ The long running time is caused by running into a timeout in gdb_run_cmd, at
+ this point:
+ ...
+ (gdb) run ^M
+ The program being debugged has been started already.^M
+ Start it from the beginning? (y or n) y^M
+ /home/vries/gdb_versions/devel/src/gdb/gdbtypes.c:5583: internal-error: \
+ Unexpected type field location kind: 4^M
+ A problem internal to GDB has been detected,^M
+ further debugging may prove unreliable.^M
+ Quit this debugging session? (y or n)
+ ...
+
+ Fix this by detecting the internal-error in gdb_run_cmd. We don't handle it
+ in gdb_run_cmd, but stash the gdb output back into the buffer using
+ -notransfer, and let the caller proc runto deal with it.
+
+ After the fix, the test-case just takes 2 seconds.
+
+ Tested on x86_64-linux.
+
+2021-09-06 Lancelot SIX <lsix@lancelotsix.com>
+
+ gdb: rename gdb/testsuite/gdb.arch/riscv64-unwind-prologue-with-ld-lw.c
+ A previous commit added the
+ gdb.arch/riscv64-unwind-prologue-with-ld-lw.exp testcase, but one of its
+ associated file was named after a previous version of the test.
+
+ This commit fixes this and makes sure that all the files linked to this
+ testcase share the same prefix in the name.
+
+ Tested on riscv64 GNU/Linux.
+
+2021-09-06 Tom de Vries <tdevries@suse.de>
+
+ [gdb/testsuite] Handle eof in gdb_internal_error_resync
+ Before commit 5a20fadc841 the test-case
+ gdb.dwarf2/locexpr-data-member-location.exp fails like this:
+ ...
+ FAIL: gdb.dwarf2/locexpr-data-member-location.exp: running to bar in runto \
+ (GDB internal error)
+ ERROR: : spawn id exp9 not open
+ while executing
+ "expect {
+ -i exp9 -timeout 10
+ -re "Quit this debugging session\\? \\(y or n\\) $" {
+ send_gdb "n\n" answer
+ incr count
+ }
+ -re "Create ..."
+ ("uplevel" body line 1)
+ invoked from within
+ "uplevel $body" NONE : spawn id exp9 not open
+ ERROR: Could not resync from internal error (timeout)
+ ...
+
+ Fix the:
+ ...
+ ERROR: : spawn id exp9 not open
+ ...
+ by handling eof in gdb_internal_error_resync, such that we have instead:
+ ...
+ FAIL: gdb.dwarf2/locexpr-data-member-location.exp: running to bar in runto \
+ (GDB internal error)
+ ERROR: Could not resync from internal error (eof)
+ ...
+
+ Tested on x86_64-linux.
+
+2021-09-06 Tom Tromey <tom@tromey.com>
+
+ Remove some complaints.h includes
+ There are a few includes of complaints.h that aren't necessary. This
+ patch removes them. Tested by rebuilding.
+
+2021-09-06 Nick Clifton <nickc@redhat.com>
+
+ Fix an illegal memory access triggered by disassembling corrupt s390x binaries.
+ PR 28304
+ * elfxx-score7.c (score_elf_gprel15_reloc): If there is no output bfd
+ treat the reloc as undefined.
+
+ Fix potential use on an uninitialised vairable in the MCore assembler.
+
+ Fix potential uninitialised variable in microblaze assembler code.
+
+2021-09-06 Yinjun Zhang <yinjun.zhang@corigine.com>
+
+ Add a sanity check to the init_nfp6000_mecsr_sec() function in the NFP disassembler.
+
+2021-09-06 Alexandra Hájková <ahajkova@redhat.com>
+
+ gdbtypes.c: Add the case for FIELD_LOC_KIND_DWARF_BLOCK
+ The case for FIELD_LOC_KIND_DWARF_BLOCK was missing for
+ switch TYPE_FIELD_LOC_KIND. Thas caused an internal-error
+ under some circumstances.
+
+ Fixes bug 28030.
+
+2021-09-06 GDB Administrator <gdbadmin@sourceware.org>
+
+ Automatic date update in version.in
+
+2021-09-05 GDB Administrator <gdbadmin@sourceware.org>
+
+ Automatic date update in version.in
+
+2021-09-04 Tom de Vries <tdevries@suse.de>
+
+ [gdb/testsuite] Check avx support in gdb.arch/amd64-disp-step-avx.exp
+ On a machine on Open Build Service I'm running into a SIGILL for test-case
+ gdb.arch/amd64-disp-step-avx.exp:
+ ...
+ Program received signal SIGILL, Illegal instruction.^M
+ test_rip_vex2 () at gdb.arch/amd64-disp-step-avx.S:40^M
+ 40 vmovsd ro_var(%rip),%xmm0^M
+ (gdb) FAIL: gdb.arch/amd64-disp-step-avx.exp: vex2: \
+ continue to test_rip_vex2_end
+ ...
+ The SIGILL happens when trying to execute the first avx instruction in the
+ executable.
+
+ I can't directly access the machine, but looking at the log for test-case
+ gdb.arch/i386-avx.exp, it seems that there's no avx support:
+ ...
+ Breakpoint 1, main (argc=1, argv=0x7fffffffd6b8) at gdb.arch/i386-avx.c:68^M
+ 68 if (have_avx ())^M
+ (gdb) print have_avx ()^M
+ $1 = 0^M
+ ...
+
+ Fix this by:
+ - adding a gdb_caching_proc have_avx, similar to have_mpx, using the have_avx
+ function from gdb.arch/i386-avx.c
+ - using proc have_avx in both gdb/testsuite/gdb.arch/amd64-disp-step-avx.exp
+ and gdb/testsuite/gdb.arch/i386-avx.exp.
+
+ Tested on my x86_64-linux laptop with avx support, where both test-cases pass.
+
+ gdb/testsuite/ChangeLog:
+
+ 2021-09-04 Tom de Vries <tdevries@suse.de>
+
+ PR testsuite/26950
+ * gdb/testsuite/gdb.arch/i386-avx.c (main): Remove call to have_avx.
+ (have_avx): Move ...
+ * gdb/testsuite/lib/gdb.exp (have_avx): ... here. New proc.
+ * gdb/testsuite/gdb.arch/amd64-disp-step-avx.exp: Use have_avx.
+ * gdb/testsuite/gdb.arch/i386-avx.exp: Same.
+
+2021-09-04 Mike Frysinger <vapier@gentoo.org>
+
+ gnulib: import sys_wait
+ A few sims use this to emulate process syscalls.
+ Gdb builds seem to still be fine.
+
+2021-09-04 GDB Administrator <gdbadmin@sourceware.org>
+
+ Automatic date update in version.in
+
+2021-09-03 Tom Tromey <tromey@adacore.com>
+
+ Use CORE_ADDR as return type from x86_dr_low_get_addr
+ On a Windows build locally, watchpoints started failing. I tracked
+ this down to x86_dr_low_get_addr returning an 'unsigned long'... in
+ this particular build, this is a 32-bit type, but the inferior is a
+ 64-bit program.
+
+ This patch fixes the problem by changing the return type. No other
+ change is required, because this matches the function pointer in
+ struct x86_dr_low_type.
+
+2021-09-03 Kevin Buettner <kevinb@redhat.com>
+
+ Test case reproducing PR28030 bug
+ The original reproducer for PR28030 required use of a specific
+ compiler version - gcc-c++-11.1.1-3.fc34 is mentioned in the PR,
+ though it seems probable that other gcc versions might also be able to
+ reproduce the bug as well. This commit introduces a test case which,
+ using the DWARF assembler, provides a reproducer which is independent
+ of the compiler version. (Well, it'll work with whatever compilers
+ the DWARF assembler works with.)
+
+ To the best of my knowledge, it's also the first test case which uses
+ the DWARF assembler to provide debug info for a shared object. That
+ being the case, I provided more than the usual commentary which should
+ allow this case to be used as a template when a combo shared
+ library / DWARF assembler test case is required in the future.
+
+ I provide some details regarding the bug in a comment near the
+ beginning of locexpr-dml.exp.
+
+ This problem was difficult to reproduce; I found myself constantly
+ referring to the backtrace while trying to figure out what (else) I
+ might be missing while trying to create a reproducer. Below is a
+ partial backtrace which I include for posterity.
+
+ #0 internal_error (
+ file=0xc50110 "/ironwood1/sourceware-git/f34-pr28030/bld/../../worktree-pr28030/gdb/gdbtypes.c", line=5575,
+ fmt=0xc520c0 "Unexpected type field location kind: %d")
+ at /ironwood1/sourceware-git/f34-pr28030/bld/../../worktree-pr28030/gdbsupport/errors.cc:51
+ #1 0x00000000006ef0c5 in copy_type_recursive (objfile=0x1635930,
+ type=0x274c260, copied_types=0x30bb290)
+ at /ironwood1/sourceware-git/f34-pr28030/bld/../../worktree-pr28030/gdb/gdbtypes.c:5575
+ #2 0x00000000006ef382 in copy_type_recursive (objfile=0x1635930,
+ type=0x274ca10, copied_types=0x30bb290)
+ at /ironwood1/sourceware-git/f34-pr28030/bld/../../worktree-pr28030/gdb/gdbtypes.c:5602
+ #3 0x0000000000a7409a in preserve_one_value (value=0x24269f0,
+ objfile=0x1635930, copied_types=0x30bb290)
+ at /ironwood1/sourceware-git/f34-pr28030/bld/../../worktree-pr28030/gdb/value.c:2529
+ #4 0x000000000072012a in gdbscm_preserve_values (
+ extlang=0xc55720 <extension_language_guile>, objfile=0x1635930,
+ copied_types=0x30bb290)
+ at /ironwood1/sourceware-git/f34-pr28030/bld/../../worktree-pr28030/gdb/guile/scm-value.c:94
+ #5 0x00000000006a3f82 in preserve_ext_lang_values (objfile=0x1635930,
+ copied_types=0x30bb290)
+ at /ironwood1/sourceware-git/f34-pr28030/bld/../../worktree-pr28030/gdb/extension.c:568
+ #6 0x0000000000a7428d in preserve_values (objfile=0x1635930)
+ at /ironwood1/sourceware-git/f34-pr28030/bld/../../worktree-pr28030/gdb/value.c:2579
+ #7 0x000000000082d514 in objfile::~objfile (this=0x1635930,
+ __in_chrg=<optimized out>)
+ at /ironwood1/sourceware-git/f34-pr28030/bld/../../worktree-pr28030/gdb/objfiles.c:549
+ #8 0x0000000000831cc8 in std::_Sp_counted_ptr<objfile*, (__gnu_cxx::_Lock_policy)2>::_M_dispose (this=0x1654580)
+ at /usr/include/c++/11/bits/shared_ptr_base.h:348
+ #9 0x00000000004e6617 in std::_Sp_counted_base<(__gnu_cxx::_Lock_policy)2>::_M_release (this=0x1654580) at /usr/include/c++/11/bits/shared_ptr_base.h:168
+ #10 0x00000000004e1d2f in std::__shared_count<(__gnu_cxx::_Lock_policy)2>::~__shared_count (this=0x190bb88, __in_chrg=<optimized out>)
+ at /usr/include/c++/11/bits/shared_ptr_base.h:705
+ #11 0x000000000082feee in std::__shared_ptr<objfile, (__gnu_cxx::_Lock_policy)2>::~__shared_ptr (this=0x190bb80, __in_chrg=<optimized out>)
+ at /usr/include/c++/11/bits/shared_ptr_base.h:1154
+ #12 0x000000000082ff0a in std::shared_ptr<objfile>::~shared_ptr (
+ this=0x190bb80, __in_chrg=<optimized out>)
+ at /usr/include/c++/11/bits/shared_ptr.h:122
+ #13 0x000000000085ed7e in __gnu_cxx::new_allocator<std::_List_node<std::shared_ptr<objfile> > >::destroy<std::shared_ptr<objfile> > (this=0x114bc00,
+ __p=0x190bb80) at /usr/include/c++/11/ext/new_allocator.h:168
+ #14 0x000000000085e88d in std::allocator_traits<std::allocator<std::_List_node<std::shared_ptr<objfile> > > >::destroy<std::shared_ptr<objfile> > (__a=...,
+ __p=0x190bb80) at /usr/include/c++/11/bits/alloc_traits.h:531
+ #15 0x000000000085e50c in std::__cxx11::list<std::shared_ptr<objfile>, std::allocator<std::shared_ptr<objfile> > >::_M_erase (this=0x114bc00, __position=
+ std::shared_ptr<objfile> (expired, weak count 1) = {get() = 0x1635930})
+ at /usr/include/c++/11/bits/stl_list.h:1925
+ #16 0x000000000085df0e in std::__cxx11::list<std::shared_ptr<objfile>, std::allocator<std::shared_ptr<objfile> > >::erase (this=0x114bc00, __position=
+ std::shared_ptr<objfile> (expired, weak count 1) = {get() = 0x1635930})
+ at /usr/include/c++/11/bits/list.tcc:158
+ #17 0x000000000085c748 in program_space::remove_objfile (this=0x114bbc0,
+ objfile=0x1635930)
+ at /ironwood1/sourceware-git/f34-pr28030/bld/../../worktree-pr28030/gdb/progspace.c:210
+ #18 0x000000000082d3ae in objfile::unlink (this=0x1635930)
+ at /ironwood1/sourceware-git/f34-pr28030/bld/../../worktree-pr28030/gdb/objfiles.c:487
+ #19 0x000000000082e68c in objfile_purge_solibs ()
+ at /ironwood1/sourceware-git/f34-pr28030/bld/../../worktree-pr28030/gdb/objfiles.c:875
+ #20 0x000000000092dd37 in no_shared_libraries (ignored=0x0, from_tty=1)
+ at /ironwood1/sourceware-git/f34-pr28030/bld/../../worktree-pr28030/gdb/solib.c:1236
+ #21 0x00000000009a37fe in target_pre_inferior (from_tty=1)
+ at /ironwood1/sourceware-git/f34-pr28030/bld/../../worktree-pr28030/gdb/target.c:2496
+ #22 0x00000000007454d6 in run_command_1 (args=0x0, from_tty=1,
+ run_how=RUN_NORMAL)
+ at /ironwood1/sourceware-git/f34-pr28030/bld/../../worktree-pr28030/gdb/infcmd.c:437
+
+ I'll note a few points regarding this backtrace:
+
+ Frame #1 is where the internal error occurs. It's caused by an
+ unhandled case for FIELD_LOC_KIND_DWARF_BLOCK. The fix for this bug
+ adds support for this case.
+
+ Frame #22 - it's a partial backtrace - shows that GDB is attempting to
+ (re)run the program. You can see the exact command sequence that was
+ used for reproducing this problem in the PR (at
+ https://sourceware.org/bugzilla/show_bug.cgi?id=28030), but in a
+ nutshell, after starting the program and advancing to the appropriate
+ source line, GDB was asked to step into libstdc++; a "finish" command
+ was issued, returning a value. The fact that a value was returned is
+ very important. GDB was then used to step back into libstdc++. A
+ breakpoint was set on a source line in the library after which a "run"
+ command was issued.
+
+ Frame #19 shows a call to objfile_purge_solibs. It's aptly named.
+
+ Frame #7 is a call to the destructor for one of the objfile solibs; it
+ turned out to be the one for libstdc++.
+
+ Frames #6 thru #3 show various value preservation frames. If you look
+ at preserve_values() in gdb/value.c, the value history is preserved
+ first, followed by internal variables, followed by values for the
+ extension languages (python and guile).
+
+2021-09-03 Tom de Vries <tdevries@suse.de>
+
+ [gdb/testsuite] Add untested case in gdb.gdb/complaints.exp
+ When building gdb with "-Wall -O2 -g -flto=auto", I run into:
+ ...
+ (gdb) call clear_complaints()^M
+ No symbol "clear_complaints" in current context.^M
+ (gdb) FAIL: gdb.gdb/complaints.exp: clear complaints
+ ...
+
+ The problem is that lto has optimized away clear_complaints, and consequently
+ the selftests cannot run.
+
+ Fix this by:
+ - using info function to detect presence of clear_complaints
+ - handling the absence of clear_complaints by calling untested
+ ...
+ (gdb) UNTESTED: gdb.gdb/complaints.exp: \
+ Cannot find clear_complaints, skipping test
+ ...
+
+ Tested on x86_64-linux.
+
+ gdb/testsuite/ChangeLog:
+
+ 2021-09-03 Tom de Vries <tdevries@suse.de>
+
+ * gdb.gdb/complaints.exp: Use untested if clear_complaints cannot
+ be found.
+
+2021-09-03 Felix Willgerodt <felix.willgerodt@intel.com>
+
+ gdb: Enable finish command and inferior calls for _Float16 on amd64 and i386.
+ Values of type _Float16 and _Float16 _Complex can now be used on CPUs with
+ AVX512-FP16 support. Return values of those types are located in XMM0.
+ Compiler support for gcc and clang is in progress, see e.g.:
+ https://gcc.gnu.org/pipermail/gcc-patches/2021-July/574117.html
+
+ gdb/ChangeLog:
+ 2021-07-21 Felix Willgerodt <Felix.Willgerodt@intel.com>
+
+ * amd64-tdep.c (amd64_classify): Classify _Float16 and
+ _Float16 _Complex as AMD64_SSE.
+ * i386-tdep.c (i386_extract_return_value): Read _Float16 and
+ _Float16 _Complex from xmm0.
+
+ gdb/testsuite/ChangeLog:
+ 2021-07-21 Felix Willgerodt <Felix.Willgerodt@intel.com>
+
+ * gdb.arch/x86-avx512fp16-abi.c: New file.
+ * gdb.arch/x86-avx512fp16-abi.exp: New file.
+
+2021-09-03 Felix Willgerodt <felix.willgerodt@intel.com>
+
+ Add half support for AVX512 register view.
+ This adds support for the half datatype, FP16, to the AVX512 register printing.
+
+ gdb/ChangeLog:
+ 2020-07-21 Felix Willgerodt <Felix.Willgerodt@intel.com>
+
+ * i386-tdep.c (i386_zmm_type) <v32_half>: New field.
+ (i386_ymm_type) <v16_half>: New field.
+ (i386_gdbarch_init): Add set_gdbarch_half_format.
+ * features/i386/64bit-avx512.xml: Add half type.
+ * features/i386/64bit-avx512.c: Regenerated.
+ * features/i386/64bit-sse.xml: Add half type.
+ * features/i386/64bit-sse.c: Regenerated.
+
+ gdb/testsuite/ChangeLog:
+ 2021-07-21 Felix Willgerodt <Felix.Willgerodt@intel.com>
+
+ * gdb.arch/x86-avx512fp16.c: New file.
+ * gdb.arch/x86-avx512fp16.exp: New file.
+ * lib/gdb.exp (skip_avx512fp16_tests): New function.
+
+2021-09-03 Felix Willgerodt <felix.willgerodt@intel.com>
+
+ gdb, i386: Enable AVX512-bfloat16 for i386 targets.
+ Values of type bfloat16 can also be used on 32-bit targets, which was missed
+ in the original enablement. This also adjusts the testcase to pass with
+ "unix/-m32", where only the lower 8 AVX registers are available.
+
+ gdb/ChangeLog:
+ 2021-07-21 Felix Willgerodt <Felix.Willgerodt@intel.com>
+
+ * features/i386/32bit-sse.xml: Add bfloat16 type.
+ * features/i386/32bit-sse.c: Regenerated.
+
+ gdb/testsuite/ChangeLog:
+ 2021-07-21 Felix Willgerodt <Felix.Willgerodt@intel.com>
+
+ * gdb.arch/x86-avx512bf16.exp: Only use x/z/ymm 0-7.
+
+2021-09-03 Tom de Vries <tdevries@suse.de>
+
+ [gdb/testsuite] Add untested case in selftest_setup
+ When building gdb with "-Wall -O2 -g -flto=auto", I run into:
+ ...
+ FAIL: gdb.gdb/python-helper.exp: breakpoint in captured_main \
+ (got interactive prompt)
+ FAIL: gdb.gdb/python-helper.exp: run until breakpoint at captured_main
+ WARNING: Couldn't test self
+ ...
+ and similar in gdb.gdb/selftest.exp.
+
+ The first FAIL in more detail:
+ ...
+ (gdb) break captured_main^M
+ Function "captured_main" not defined.^M
+ Make breakpoint pending on future shared library load? (y or [n]) n^M
+ (gdb) FAIL: gdb.gdb/python-helper.exp: breakpoint in captured_main \
+ (got interactive prompt)
+ ...
+
+ The problem is that lto has optimized away the captured_main function
+ and consequently the selftests dependent on that cannot run.
+
+ Fix this by:
+ - using gdb_breakpoint to detect failure to set the breakpoint
+ - handling the failure to set a breakpoint by calling untested
+ - not emitting the warning if we've already got untested
+ such that we have:
+ ...
+ (gdb) UNTESTED: gdb.gdb/python-helper.exp: Cannot set breakpoint at \
+ captured_main, skipping testcase.
+ ...
+
+ gdb/testsuite/ChangeLog:
+
+ 2021-09-02 Tom de Vries <tdevries@suse.de>
+
+ * lib/selftest-support.exp: Emit untested when not being able to set
+ breakpoint.
+
+2021-09-03 Alan Modra <amodra@gmail.com>
+
+ ld testsuite tidy
+ Fixes a few issues:
+ 1) If you use "-fsanitize=address,undefined" in CFLAGS, the Makefile
+ attempt to trim off -fsanitize options left us with ",undefined".
+ 2) ld_compile adds CFLAGS_FOR_TARGET itself, no need to pass it.
+ 3) CFLAGS might be needed linking bootstrap test.
+
+ * Makefile.am (CFLAGS_FOR_TARGET, CXXFLAGS_FOR_TARGET): Trim off
+ all -fsanitize=*.
+ * Makefile.in: Regenerate.
+ * testsuite/ld-bootstrap/bootstrap.exp: Use CFLAGS when linking.
+ * testsuite/ld-cdtest/cdtest.exp: Use CFLAGS_FOR_TARGET when
+ linking.
+ * testsuite/ld-auto-import/auto-import.exp: Don't pass
+ CFLAGS_FOR_TARGET to ld_compile.
+ * testsuite/ld-cygwin/exe-export.exp: Likewise.
+ * testsuite/ld-elfvers/vers.exp: Likewise.
+ * testsuite/ld-elfvsb/elfvsb.exp: Likewise.
+ * testsuite/ld-elfweak/elfweak.exp: Likewise.
+ * testsuite/ld-gc/gc.exp: Likewise.
+ * testsuite/ld-pe/pe-compile.exp: Likewise.
+ * testsuite/ld-pe/pe-run.exp: Likewise.
+ * testsuite/ld-pe/pe-run2.exp: Likewise.
+ * testsuite/ld-plugin/plugin.exp: Likewise.
+ * testsuite/ld-shared/shared.exp: Likewise.
+ * testsuite/ld-elfcomm/elfcomm.exp: Likewise, and don't allow
+ nios2 testing to trash CFLAGS_FOR_TARGET.
+ * testsuite/ld-scripts/crossref.exp: Don't pass options in
+ CC_FOR_TARGET, do so in CFLAGS_FOR_TARGET instead.
+ * testsuite/ld-srec/srec.exp: Likewise, and for CXX.
+
+2021-09-03 Alan Modra <amodra@gmail.com>
+
+ CC_FOR_TARGET et al
+ The top level Makefile, the ld Makefile and others, define
+ CC_FOR_TARGET to be a compiler for the binutils target machine. This
+ is the compiler that should be used for almost all tests with C
+ source. There are _FOR_TARGET versions of CFLAGS, CXX, and CXXFLAGS
+ too. This was all supposed to work with the testsuite .exp files
+ using CC for the target compiler, and CC_FOR_HOST for the host
+ compiler, with the makefiles passing CC=$CC_FOR_TARGET and
+ CC_FOR_HOST=$CC to the runtest invocation.
+
+ One exception to the rule of using CC_FOR_TARGET is the native-only ld
+ bootstrap test, which uses the newly built ld to link a copy of
+ itself. Since the files being linked were created with the host
+ compiler, the boostrap test should use CC and CFLAGS, in case some
+ host compiler option provides needed libraries automatically.
+ However, bootstrap.exp used CC where it should have used CC_FOR_HOST.
+ I set about fixing that problem, then decided that playing games in
+ the makefiles with CC was a bad idea. Not only is it confusing, but
+ other dejagnu code knows about CC_FOR_TARGET. See dejagnu/target.exp.
+
+ So this patch gets rid of the makefile variable renaming and changes
+ all the .exp files to use the correct _FOR_TARGET variables.
+ CC_FOR_HOST and CFLAGS_FOR_HOST disappear. A followup patch will
+ correct bootstrap.exp to use CFLAGS, and a number of other things I
+ noticed.
+
+ binutils/
+ * testsuite/lib/binutils-common.exp (run_dump_test): Use
+ CC_FOR_TARGET and CFLAGS_FOR_TARGET rather than CC and CFLAGS.
+ ld/
+ * Makefile.am (check-DEJAGNU): Don't set CC to CC_FOR_TARGET
+ and similar. Pass variables with unchanged names. Don't set
+ CC_FOR_HOST or CFLAGS_FOR_HOST.
+ * Makefile.in: Regenerate.
+ * testsuite/config/default.exp: Update default CC and similar.
+ (compiler_supports, plug_opt): Use CC_FOR_TARGET.
+ * testsuite/ld-cdtest/cdtest.exp: Replace all uses of CC with
+ CC_FOR_TARGET, and similarly for CFLAGS, CXX and CXXFLAGS.
+ * testsuite/ld-auto-import/auto-import.exp: Likewise.
+ * testsuite/ld-cygwin/exe-export.exp: Likewise.
+ * testsuite/ld-elf/dwarf.exp: Likewise.
+ * testsuite/ld-elf/indirect.exp: Likewise.
+ * testsuite/ld-elf/shared.exp: Likewise.
+ * testsuite/ld-elfcomm/elfcomm.exp: Likewise.
+ * testsuite/ld-elfvers/vers.exp: Likewise.
+ * testsuite/ld-elfvsb/elfvsb.exp: Likewise.
+ * testsuite/ld-elfweak/elfweak.exp: Likewise.
+ * testsuite/ld-gc/gc.exp: Likewise.
+ * testsuite/ld-ifunc/ifunc.exp: Likewise.
+ * testsuite/ld-mn10300/mn10300.exp: Likewise.
+ * testsuite/ld-pe/pe-compile.exp: Likewise.
+ * testsuite/ld-pe/pe-run.exp: Likewise.
+ * testsuite/ld-pe/pe-run2.exp: Likewise.
+ * testsuite/ld-pie/pie.exp: Likewise.
+ * testsuite/ld-plugin/lto.exp: Likewise.
+ * testsuite/ld-plugin/plugin.exp: Likewise.
+ * testsuite/ld-scripts/crossref.exp: Likewise.
+ * testsuite/ld-selective/selective.exp: Likewise.
+ * testsuite/ld-sh/sh.exp: Likewise.
+ * testsuite/ld-shared/shared.exp: Likewise.
+ * testsuite/ld-srec/srec.exp: Likewise.
+ * testsuite/ld-undefined/undefined.exp: Likewise.
+ * testsuite/ld-unique/unique.exp: Likewise.
+ * testsuite/ld-x86-64/tls.exp: Likewise.
+ * testsuite/lib/ld-lib.exp: Likewise.
+ libctf/
+ * Makefile.am (check-DEJAGNU): Don't set CC to CC_FOR_TARGET.
+ Pass CC and CC_FOR_TARGET. Don't set CC_FOR_HOST.
+ * Makefile.in: Regenerate.
+ * testsuite/config/default.exp: Update default CC and similar.
+ * testsuite/lib/ctf-lib.exp (run_native_host_cmd): Use CC rather
+ than CC_FOR_HOST.
+ (run_lookup_test): Use CC_FOR_TARGET and CFLAGS_FOR_TARGET.
+
+2021-09-03 Alan Modra <amodra@gmail.com>
+
+ pj: asan: out of bounds, ubsan: left shift of negative
+ * pj-dis.c: Include libiberty.h.
+ (print_insn_pj): Don't index op->arg past array bound. Don't
+ left shift negative int.
+
+ ubsan: alpha: member access within null pointer
+ * elf64-alpha.c (elf64_alpha_relax_with_lituse): Avoid UB.
+
+ ubsan: libctf: applying zero offset to null pointer
+ * ctf-open.c (init_symtab): Avoid ubsan error.
+
+2021-09-03 Alan Modra <amodra@gmail.com>
+
+ haiku tidy
+ --enable-maintainer-mode showed a number of files needing to be
+ regenerated, and in the case of ld/Makefile.in that the file was
+ regenerated by hand. Nothing to see here really.
+
+ ld/
+ * Makefile.am (ALL_64_EMULATION_SOURCES): Sort haiku entry.
+ * Makefile.in: Regenerate.
+ * po/BLD-POTFILES.in: Regenerate.
+ libctf/
+ * configure: Regenerate.
+ zlib/
+ * configure: Regenerate.
+
+2021-09-03 Fangrui Song <maskray@google.com>
+
+ gold: --export-dynamic-symbol: don't imply -u
+ to match GNU ld.
+
+ gold/
+ * archive.cc (Library_base::should_include_member): Don't handle
+ --export-dynamic-symbol.
+ * symtab.cc (Symbol_table::do_add_undefined_symbols_from_command_line):
+ Likewise.
+
+2021-09-03 GDB Administrator <gdbadmin@sourceware.org>
+
+ Automatic date update in version.in
+
+2021-09-02 Alexander von Gluck IV <kallisti5@unixzen.com>
+
+ Add support for the haiku operating system. These are the os support patches we have been grooming and maintaining for quite a few years over on git.haiku-os.org. All of these architectures are working and most have been stable for quite some time.
+
+2021-09-02 Nick Clifton <nickc@redhat.com>
+
+ Fix the V850 assembler's generation of relocations for the st.b instruction.
+ PR 28292
+ gas * config/tc-v850.c (handle_lo16): Also accept
+ BFD_RELOC_V850_LO16_SPLIT_OFFSET.
+ * testsuite/gas/v850/split-lo16.s: Add extra line.
+ * testsuite/gas/v850/split-lo16.d: Update expected disassembly.
+
+ opcodes * v850-opc.c (D16): Use BFD_RELOC_V850_LO16_SPLIT_OFFSET in place
+ of BFD_RELOC_16.
+
+2021-09-02 Alan Modra <amodra@gmail.com>
+
+ SHT_SYMTAB_SHNDX handling
+ .symtab_shndx section contents is an array, one entry for each symbol
+ in .symtab, present when the number of symbols exceeds a little less
+ than 64k. Since the mapping is 1-1 with symbols there is no need to
+ keep both dest_index and destshndx_index in elf_sym_strtab. Instead,
+ just make sure that the shndx pointers to the swap functions are kept
+ NULL when .symtab_shndx does not exist. Also, strtabcount in the
+ linker's elf hash table is incremented in lock-step with the output
+ symcount, so that can disappear too.
+
+2021-09-02 Alan Modra <amodra@gmail.com>
+
+ PTR_ADD and NPTR_ADD for bfd.h
+ This defines a couple of macros used to avoid ubsan complaints about
+ calculations involving NULL pointers. PTR_ADD should be used in the
+ case where it is known that the offset is always zero with a NULL
+ pointer, and you'd like to know if a non-zero offset is ever used.
+ NPTR_ADD should be rarely used, but is defined for cases where a
+ non-zero offset is expected and should be ignored if the pointer is
+ NULL.
+
+ bfd/
+ * bfd-in.h (PTR_ADD, NPTR_ADD): Define.
+ * bfd-in2.h: Regenerate.
+ * elf-eh-frame.c (adjust_eh_frame_local_symbols): Avoid NULL
+ pointer calculations.
+ * elflink.c (_bfd_elf_strip_zero_sized_dynamic_sections): Likewise.
+ (bfd_elf_add_dt_needed_tag, elf_finalize_dynstr): Likewise.
+ (elf_link_add_object_symbols, elf_link_input_bfd): Likewise.
+ (bfd_elf_final_link, bfd_elf_gc_record_vtinherit): Likewise.
+ binutils/
+ * objdump.c (disassemble_section): Use PTR_ADD for rel_ppend.
+
+2021-09-02 Alan Modra <amodra@gmail.com>
+
+ obstack.h __PTR_ALIGN vs. ubsan
+ Current ubsan complains on every use of __PTR_ALIGN (when ptrdiff_t is
+ as large as a pointer), due to making calculations relative to a NULL
+ pointer. This patch avoids the problem by extracting out and
+ simplifying __BPTR_ALIGN for the usual case. I've continued to use
+ ptrdiff_t here, where it might be better to throw away __BPTR_ALIGN
+ entirely and just assume uintptr_t exists.
+
+ * obstack.h (__PTR_ALIGN): Expand and simplify __BPTR_ALIGN
+ rather than calculating relative to a NULL pointer.
+
+2021-09-02 GDB Administrator <gdbadmin@sourceware.org>
+
+ Automatic date update in version.in
+
+2021-09-01 Tom de Vries <tdevries@suse.de>
+
+ [gdb/testsuite] Fix dwo path in fission-*.S
+ [ Using $build for /home/vries/gdb_versions/devel/build to make things a bit
+ more readable. ]
+
+ When using make check// to run test-case gdb.dwarf2/fission-base.exp:
+ ...
+ ( cd $build/gdb; make check//unix RUNTESTFLAGS="fission-base.exp" )
+ ...
+ we run into:
+ ...
+ (gdb) file \
+ $build/gdb/testsuite.unix/outputs/gdb.dwarf2/fission-base/fission-base^M
+ Reading symbols from \
+ $build/gdb/testsuite.unix/outputs/gdb.dwarf2/fission-base/fission-base...^M
+ warning: Could not find DWO CU \
+ $build/gdb/testsuite.1/outputs/gdb.dwarf2/fission-base/fission-base.dwo \
+ (0x807060504030201) referenced by CU at offset 0xc7 [in module \
+ $build/gdb/testsuite.unix/outputs/gdb.dwarf2/fission-base/fission-base]^M
+ ...
+
+ The problem is that the executable refers to the dwo file using path name
+ $build/gdb/testsuite.1/outputs/gdb.dwarf2/fission-base/fission-base.dwo,
+ while the actual dwo file is at
+ $build/gdb/testsuite.unix/outputs/gdb.dwarf2/fission-base/fission-base.dwo.
+
+ This is caused by this trick in fission-base.S:
+ ...
+ #define XSTR(s) STR(s)
+ #define STR(s) #s
+ ...
+ .asciz XSTR(DWO) # DW_AT_GNU_dwo_name
+ ...
+ and:
+ ...
+ $ echo | gcc -E -dD - | grep "define unix"
+ ...
+
+ I used this trick to avoid doing additional_flags=-DDWO=\"$dwo\", since I was
+ concerned that there could be quoting issues.
+
+ However, I've found other uses of this pattern, f.i. in
+ gdb/testsuite/gdb.base/corefile-buildid.exp:
+ ...
+ additional_flags=-DSHLIB_NAME=\"$dlopen_lib\"]
+ ...
+
+ So, fix this by:
+ - using additional_flags=-DDWO=\"$dwo\" and
+ - using plain DWO instead of XSTR(DWO)
+
+ Likewise in other gdb.dwarf2/fission*.exp test-cases.
+
+ Tested on x86_64-linux, using make check//unix.
+
+ gdb/testsuite/ChangeLog:
+
+ 2021-09-01 Tom de Vries <tdevries@suse.de>
+
+ PR testsuite/28298
+ * gdb.dwarf2/fission-base.S: Use DWO instead of XSTR(DWO).
+ * gdb.dwarf2/fission-loclists-pie.S: Same.
+ * gdb.dwarf2/fission-loclists.S: Same.
+ * gdb.dwarf2/fission-reread.S: Same.
+ * gdb.dwarf2/fission-base.exp: Use additional_flags=-DDWO=\"$dwo\".
+ * gdb.dwarf2/fission-loclists-pie.exp: Same.
+ * gdb.dwarf2/fission-loclists.exp: Same.
+ * gdb.dwarf2/fission-reread.exp: Same.
+
+2021-09-01 Tom de Vries <tdevries@suse.de>
+
+ [gdb/testsuite] Fix gdb.fortran/call-no-debug.exp symbol search
+ On openSUSE Tumbleweed I ran into:
+ ...
+ (gdb) ptype outstring_func.part^M
+ No symbol "outstring_func" in current context.^M
+ (gdb) FAIL: gdb.fortran/call-no-debug.exp: ptype outstring_func.part
+ ...
+ while on openSUSE Leap 15.2 I have instead:
+ ...
+ (gdb) ptype string_func_^M
+ type = <unknown return type> ()^M
+ (gdb) PASS: gdb.fortran/call-no-debug.exp: ptype string_func_
+ ...
+
+ The difference is caused by the result for "info function string_func", which
+ is this for the latter:
+ ...
+ (gdb) info function string_func^M
+ All functions matching regular expression "string_func":^M
+ ^M
+ Non-debugging symbols:^M
+ 0x000000000040089c string_func_^M
+ ...
+ but this for the former:
+ ...
+ (gdb) info function string_func^M
+ All functions matching regular expression "string_func":^M
+ ^M
+ Non-debugging symbols:^M
+ 0x00000000004012bb string_func_^M
+ 0x00007ffff7bac5b0 outstring_func.part^M
+ 0x00007ffff7bb1a00 outstring_func.part^M
+ ...
+
+ The extra symbols are part of glibc:
+ ...
+ $ nm /lib64/libc.so.6 | grep string_func
+ 00000000000695b0 t outstring_func.part.0
+ 000000000006ea00 t outstring_func.part.0
+ ...
+
+ If glibc debug info is installed, we get instead:
+ ...
+ (gdb) info function string_func^M
+ All functions matching regular expression "string_func":^M
+ ^M
+ File /usr/src/debug/glibc-2.33-9.1.x86_64/stdio-common/vfprintf-internal.c:^M
+ 236: static int outstring_func(int, size_t, const unsigned int *, FILE *);^M
+ ^M
+ File vfprintf-internal.c:^M
+ 236: static int outstring_func(int, size_t, const unsigned char *, FILE *);^M
+ ^M
+ Non-debugging symbols:^M
+ 0x00000000004012bb string_func_^M
+ ...
+ and the FAIL doesn't trigger.
+
+ Fix this by calling "info function string_func" before starting the exec, such
+ that only symbols of the exec are taken into account.
+
+ Tested on x86_64-linux.
+
+ gdb/testsuite/ChangeLog:
+
+ 2021-09-01 Tom de Vries <tdevries@suse.de>
+
+ * gdb.fortran/call-no-debug.exp: Avoid shared lib symbols for
+ find_mangled_name calls.
+
+2021-09-01 Yinjun Zhang <yinjun.zhang@corigine.com>
+
+ nfp: add validity check of island and me
+ AddressSanitizer detects heap-buffer-overflow when running
+ "objdump -D" for nfp .nffw files.
+
+ PR 27854
+ * nfp-dis.c (_NFP_ISLAND_MAX, _NFP_ME_MAX): Define.
+ (nfp_priv_data): ..and use here.
+ (_print_instrs): Sanity check island and menum.
+
+2021-09-01 Alan Modra <amodra@gmail.com>
+
+ PR28250, Null pointer dereference in debug_class_type_samep
+ Typo fix, obviously should be m1->variants != NULL, not
+ m1->variants == NULL.
+
+ PR 28250
+ * debug.c (debug_class_type_samep): Correct m1->variants test.
+
+2021-09-01 GDB Administrator <gdbadmin@sourceware.org>
+
+ Automatic date update in version.in
+
+2021-08-31 Simon Marchi <simon.marchi@polymtl.ca>
+
+ gdb: remove breakpoint_find_if
+ Remove breakpoint_find_if, replace its sole usage with using
+ all_breakpoints directly instead. At the same time, change return
+ types to use bool.
+
+ Change-Id: I9ec392236b4804b362d16ab563330b9c07311106
+
+2021-08-31 Nick Clifton <nickc@redhat.com>
+
+ Update the how-to-make-a-release document so that a check for empty manual pages is included. cf PR 28144
+
+2021-08-31 Nelson Chu <nelson.chu@sifive.com>
+
+ RISC-V: Extend .insn directive to support hardcode encoding.
+ The .insn directive can let users use their own instructions, or
+ some new instruction, which haven't supported in the old binutils.
+ For example, if users want to use sifive cache instruction, they
+ cannot just write "cflush.d1.l1" in the assembly code, they should
+ use ".insn i SYSTEM, 0, x0, x10, -0x40". But the .insn directive
+ may not easy to use for some cases, and not so friendly to users.
+ Therefore, I believe most of the users will use ".word 0xfc050073",
+ to encode the instructions directly, rather than use .insn. But
+ once we have supported the mapping symbols, the .word directives
+ are marked as data, so disassembler won't dump them as instructions
+ as usual. I have discussed this with Kito many times, we all think
+ extend the .insn direcitve to support the hardcode encoding, is the
+ easiest way to resolve the problem. Therefore, there are two more
+ .insn formats are proposed as follows,
+
+ (original) .insn <type>, <operand1>, <operand2>, ...
+ .insn <insn-length>, <value>
+ .insn <value>
+
+ The <type> is string, and the <insn-length> and <value> are constants.
+
+ gas/
+ * config/tc-riscv.c (riscv_ip_hardcode): Similar to riscv_ip,
+ but assembles an instruction according to the hardcode values
+ of .insn directive.
+ * doc/c-riscv.texi: Document two new .insn formats.
+ * testsuite/gas/riscv/insn-fail.d: New testcases.
+ * testsuite/gas/riscv/insn-fail.l: Likewise.
+ * testsuite/gas/riscv/insn-fail.s: Likewise.
+ * testsuite/gas/riscv/insn.d: Updated.
+ * testsuite/gas/riscv/insn.s: Likewise.
+
+2021-08-31 John Baldwin <jhb@FreeBSD.org>
+
+ Use gdbfmt for vprintf_filtered.
+ gdbfmt was already used for printf_filtered, so using it for
+ vprintf_filtered is more consistent.
+
+ As a result, all callers of vfprintf_maybe_filtered now use gdbfmt, so
+ the function can be simplified to assume the gdbfmt case and remove
+ the associated bool argument. Similary, vprintf_filtered is now a
+ simple wrapper around vfprintf_filtered.
+
+2021-08-31 GDB Administrator <gdbadmin@sourceware.org>
+
+ Automatic date update in version.in
+
+2021-08-30 John Baldwin <jhb@FreeBSD.org>
+
+ fbsd-nat: Don't use '%jd' and '%ju' with printf_filtered.
+ The handler for 'info proc status' for native processes on FreeBSD
+ uses the 'j' size modifier along with uintmax_t / intmax_t casts to
+ output integer values for types such as off_t that are not aliases of
+ a basic C type such as 'int' or 'long'. printf_filtered does not
+ support the 'j' modifer, so this resulted in runtime errors in
+ practice:
+
+ (gdb) info proc stat
+ process 8674
+ Name: ls
+ State: T (stopped)
+ Parent process: 8673
+ Process group: 8674
+ Session id: 2779
+ Unrecognized format specifier 'j' in printf
+
+ Instead, use plongest and pulongest to generate the output strings of
+ these integer values.
+
+2021-08-30 Simon Marchi <simon.marchi@polymtl.ca>
+
+ gdb: fix build error in unittests/parallel-for-selftests.c
+ We get this error when building GDB on some platforms. I get it using
+ g++-10 on Ubuntu 20.04 (installed using the distro package). It was
+ also reported by John Baldwin, using a clang that uses libc++.
+
+ CXX unittests/parallel-for-selftests.o
+ cc1plus: warning: command line option '-Wmissing-prototypes' is valid for C/ObjC but not for C++
+ /home/smarchi/src/binutils-gdb/gdb/unittests/parallel-for-selftests.c: In function 'void selftests::parallel_for::test(int)':
+ /home/smarchi/src/binutils-gdb/gdb/unittests/parallel-for-selftests.c:53:30: error: use of deleted function 'std::atomic<int>::atomic(const std::atomic<int>&)'
+ 53 | std::atomic<int> counter = 0;
+ | ^
+ In file included from /usr/include/c++/9/future:42,
+ from /home/smarchi/src/binutils-gdb/gdb/../gdbsupport/thread-pool.h:29,
+ from /home/smarchi/src/binutils-gdb/gdb/../gdbsupport/parallel-for.h:26,
+ from /home/smarchi/src/binutils-gdb/gdb/unittests/parallel-for-selftests.c:22:
+ /usr/include/c++/9/atomic:755:7: note: declared here
+ 755 | atomic(const atomic&) = delete;
+ | ^~~~~~
+ /usr/include/c++/9/atomic:759:17: note: after user-defined conversion: 'constexpr std::atomic<int>::atomic(std::atomic<int>::__integral_type)'
+ 759 | constexpr atomic(__integral_type __i) noexcept : __base_type(__i) { }
+ | ^~~~~~
+
+ I haven't dug to know why it does not happen everywhere, but this patch
+ fixes it by using the constructor to initialize the variable, rather
+ than the assignment operator.
+
+ Change-Id: I6b27958171bf6187f6a875657395fd10441db7e6
+
+2021-08-30 Nelson Chu <nelson.chu@sifive.com>
+
+ RISC-V: PR28291, Fix the gdb fails that PR27916 caused.
+ * According to PR28291, we get the following unexpected gdb behavior,
+
+ (gdb) disassemble 0x0,+4
+ Dump of assembler code from 0x0 to 0x4:
+ 0x0000000000000000:
+ 0x0000000000000001:
+ 0x0000000000000002:
+ 0x0000000000000003:
+ End of assembler dump.
+
+ * This patch should fix it to the right behavior,
+
+ (gdb) disassemble 0x0,+4
+ Dump of assembler code from 0x0 to 0x4:
+ 0x0000000000000000: Cannot access memory at address 0x0
+
+ opcodes/
+ pr 28291
+ * riscv-dis.c (print_insn_riscv): Return STATUS if it is not zero.
+
+2021-08-30 Tom Tromey <tom@tromey.com>
+
+ Add some parallel_for_each tests
+ Tom de Vries noticed that a patch in the DWARF scanner rewrite series
+ caused a regression in parallel_for_each -- it started crashing in the
+ case where the number of threads is 0 (there was an unchecked use of
+ "n-1" that was used to size an array).
+
+ He also pointed out that there were no tests of parallel_for_each.
+ This adds a few tests of parallel_for_each, primarily testing that
+ different settings for the number of threads will work. This test
+ catches the bug that he found in that series.
+
+2021-08-30 Tom Tromey <tom@tromey.com>
+
+ Add a show function for "maint show worker-threads"
+ I wanted to see how many threads gdb thought it was using, but
+ "maint show worker-threads" only reported "unlimited". This patch
+ adds a show function so that it will now report the number of threads
+ gdb has started.
+
+ Regression tested on x86-64 Fedora 34.
+
+2021-08-30 Tom de Vries <tdevries@suse.de>
+
+ [gdb/cli] Don't assert on empty string for core-file
+ With current gdb we run into:
+ ...
+ $ gdb -batch '' ''
+ : No such file or directory.
+ pathstuff.cc:132: internal-error: \
+ gdb::unique_xmalloc_ptr<char> gdb_abspath(const char*): \
+ Assertion `path != NULL && path[0] != '\0'' failed.
+ ...
+
+ Fix this by skipping the call to gdb_abspath in core_target_open in the
+ empty-string case, such that we have instead:
+ ...
+ $ gdb -batch '' ''
+ : No such file or directory.
+ : No such file or directory.
+ $
+ ...
+
+ Tested on x86_64-linux.
+
+ gdb/ChangeLog:
+
+ 2021-08-30 Tom de Vries <tdevries@suse.de>
+
+ PR cli/28290
+ * gdb/corelow.c (core_target_open): Skip call to gdb_abspath in the
+ empty-string case.
+
+ gdb/testsuite/ChangeLog:
+
+ 2021-08-30 Tom de Vries <tdevries@suse.de>
+
+ PR cli/28290
+ * gdb.base/batch-exit-status.exp: Add gdb '' and gdb '' '' tests.
+
+2021-08-30 Nelson Chu <nelson.chu@sifive.com>
+
+ RISC-V: PR27916, Support mapping symbols.
+ Similar to ARM/AARCH64, we add mapping symbols in the symbol table,
+ to mark the start addresses of data and instructions. The $d means
+ data, and the $x means instruction. Then the disassembler uses these
+ symbols to decide whether we should dump data or instruction.
+
+ Consider the mapping-04 test case,
+ $ cat tmp.s
+ .text
+ .option norelax
+ .option norvc
+ .fill 2, 4, 0x1001
+ .byte 1
+ .word 0
+ .balign 8
+ add a0, a0, a0
+ .fill 5, 2, 0x2002
+ add a1, a1, a1
+ .data
+ .word 0x1 # No need to add mapping symbols.
+ .word 0x2
+
+ $ riscv64-unknown-elf-as tmp.s -o tmp.o
+ $ riscv64-unknown-elf-objdump -d tmp.o
+
+ Disassembly of section .text:
+
+ 0000000000000000 <.text>:
+ 0: 00001001 .word 0x00001001 # Marked $d, .fill directive.
+ 4: 00001001 .word 0x00001001
+ 8: 00000001 .word 0x00000001 # .byte + part of .word.
+ c: 00 .byte 0x00 # remaining .word.
+ d: 00 .byte 0x00 # Marked $d, odd byte of alignment.
+ e: 0001 nop # Marked $x, nops for alignment.
+ 10: 00a50533 add a0,a0,a0
+ 14: 20022002 .word 0x20022002 # Marked $d, .fill directive.
+ 18: 20022002 .word 0x20022002
+ 1c: 2002 .short 0x2002
+ 1e: 00b585b3 add a1,a1,a1 # Marked $x.
+ 22: 0001 nop # Section tail alignment.
+ 24: 00000013 nop
+
+ * Use $d and $x to mark the distribution of data and instructions.
+ Alignments of code are recognized as instructions, since we usually
+ fill nops for them.
+
+ * If the alignment have odd bytes, then we cannot just fill the nops
+ into the spaces. We always fill an odd byte 0x00 at the start of
+ the spaces. Therefore, add a $d mapping symbol for the odd byte,
+ to tell disassembler that it isn't an instruction. The behavior
+ is same as Arm and Aarch64.
+
+ The elf/linux toolchain regressions all passed. Besides, I also
+ disable the mapping symbols internally, but use the new objudmp, the
+ regressions passed, too. Therefore, the new objudmp should dump
+ the objects corretly, even if they don't have any mapping symbols.
+
+ bfd/
+ pr 27916
+ * cpu-riscv.c (riscv_elf_is_mapping_symbols): Define mapping symbols.
+ * cpu-riscv.h: extern riscv_elf_is_mapping_symbols.
+ * elfnn-riscv.c (riscv_maybe_function_sym): Do not choose mapping
+ symbols as a function name.
+ (riscv_elf_is_target_special_symbol): Add mapping symbols.
+ binutils/
+ pr 27916
+ * testsuite/binutils-all/readelf.s: Updated.
+ * testsuite/binutils-all/readelf.s-64: Likewise.
+ * testsuite/binutils-all/readelf.s-64-unused: Likewise.
+ * testsuite/binutils-all/readelf.ss: Likewise.
+ * testsuite/binutils-all/readelf.ss-64: Likewise.
+ * testsuite/binutils-all/readelf.ss-64-unused: Likewise.
+ gas/
+ pr 27916
+ * config/tc-riscv.c (make_mapping_symbol): Create a new mapping symbol.
+ (riscv_mapping_state): Decide whether to create mapping symbol for
+ frag_now. Only add the mapping symbols to text sections.
+ (riscv_add_odd_padding_symbol): Add the mapping symbols for the
+ riscv_handle_align, which have odd bytes spaces.
+ (riscv_check_mapping_symbols): Remove any excess mapping symbols.
+ (md_assemble): Marked as MAP_INSN.
+ (riscv_frag_align_code): Marked as MAP_INSN.
+ (riscv_init_frag): Add mapping symbols for frag, it usually called
+ by frag_var. Marked as MAP_DATA for rs_align and rs_fill, and
+ marked as MAP_INSN for rs_align_code.
+ (s_riscv_insn): Marked as MAP_INSN.
+ (riscv_adjust_symtab): Call riscv_check_mapping_symbols.
+ * config/tc-riscv.h (md_cons_align): Defined to riscv_mapping_state
+ with MAP_DATA.
+ (TC_SEGMENT_INFO_TYPE): Record mapping state for each segment.
+ (TC_FRAG_TYPE): Record the first and last mapping symbols for the
+ fragments. The first mapping symbol must be placed at the start
+ of the fragment.
+ (TC_FRAG_INIT): Defined to riscv_init_frag.
+ * testsuite/gas/riscv/mapping-01.s: New testcase.
+ * testsuite/gas/riscv/mapping-01a.d: Likewise.
+ * testsuite/gas/riscv/mapping-01b.d: Likewise.
+ * testsuite/gas/riscv/mapping-02.s: Likewise.
+ * testsuite/gas/riscv/mapping-02a.d: Likewise.
+ * testsuite/gas/riscv/mapping-02b.d: Likewise.
+ * testsuite/gas/riscv/mapping-03.s: Likewise.
+ * testsuite/gas/riscv/mapping-03a.d: Likewise.
+ * testsuite/gas/riscv/mapping-03b.d: Likewise.
+ * testsuite/gas/riscv/mapping-04.s: Likewise.
+ * testsuite/gas/riscv/mapping-04a.d: Likewise.
+ * testsuite/gas/riscv/mapping-04b.d: Likewise.
+ * testsuite/gas/riscv/mapping-norelax-04a.d: Likewise.
+ * testsuite/gas/riscv/mapping-norelax-04b.d: Likewise.
+ * testsuite/gas/riscv/no-relax-align.d: Updated.
+ * testsuite/gas/riscv/no-relax-align-2.d: Likewise.
+ include/
+ pr 27916
+ * opcode/riscv.h (enum riscv_seg_mstate): Added.
+
+ opcodes/
+ pr 27916
+ * riscv-dis.c (last_map_symbol, last_stop_offset, last_map_state):
+ Added to dump sections with mapping symbols.
+ (riscv_get_map_state): Get the mapping state from the symbol.
+ (riscv_search_mapping_symbol): Check the sorted symbol table, and
+ then find the suitable mapping symbol.
+ (riscv_data_length): Decide which data size we should print.
+ (riscv_disassemble_data): Dump the data contents.
+ (print_insn_riscv): Handle the mapping symbols.
+ (riscv_symbol_is_valid): Marked mapping symbols as invalid.
+
+2021-08-30 Tom de Vries <tdevries@suse.de>
+
+ [gdb/testsuite] Improve argument syntax of proc arange
+ The current syntax of proc arange is:
+ ...
+ proc arange { arange_start arange_length {comment ""} {seg_sel ""} } {
+ ...
+ and a typical call looks like:
+ ...
+ arange $start $len
+ ...
+
+ This style is somewhat annoying because if you want to specify the last
+ parameter, you need to give the default values of all the other optional ones
+ before as well:
+ ...
+ arange $start $len "" $seg_sel
+ ...
+
+ Update the syntax to:
+ ...
+ proc arange { options arange_start arange_length } {
+ parse_options {
+ { comment "" }
+ { seg_sel "" }
+ }
+ ...
+ such that a typical call looks like:
+ ...
+ arange {} $start $len
+ ...
+ and a call using seg_sel looks like:
+ ...
+ arange {
+ seg_sel $seg_sel
+ } $start $len
+ ...
+
+ Also update proc aranges, which already has an options argument, to use the
+ new proc parse_options.
+
+ Tested on x86_64-linux.
+
+ Co-Authored-By: Simon Marchi <simon.marchi@polymtl.ca>
+
+2021-08-30 GDB Administrator <gdbadmin@sourceware.org>
+
+ Automatic date update in version.in
+
+2021-08-29 GDB Administrator <gdbadmin@sourceware.org>
+
+ Automatic date update in version.in
+
+2021-08-28 H.J. Lu <hjl.tools@gmail.com>
+
+ ld: Change indirect symbol from IR to undefined
+ bfd/
+
+ PR ld/28264
+ * elflink.c (_bfd_elf_merge_symbol): Change indirect symbol from
+ IR to undefined.
+
+ ld/
+
+ PR ld/28264
+ * testsuite/ld-plugin/lto.exp: Run PR ld/28264 test.
+ * testsuite/ld-plugin/pr28264-1.d: New file.
+ * testsuite/ld-plugin/pr28264-2.d: Likewise.
+ * testsuite/ld-plugin/pr28264-3.d: Likewise.
+ * testsuite/ld-plugin/pr28264-4.d: Likewise.
+ * testsuite/ld-plugin/pr28264.c: Likewise.
+ * testsuite/ld-plugin/pr28264.ver: Likewise.
+
+2021-08-28 Alan Modra <amodra@gmail.com>
+
+ PR28264, ld.bfd crash on linking efivar with LTO
+ PR 28264
+ PR 26978
+ * linker.c (_bfd_generic_link_add_one_symbol <MIND>): Check
+ that string is non-NULL.
+
+2021-08-28 GDB Administrator <gdbadmin@sourceware.org>
+
+ Automatic date update in version.in
+
+2021-08-27 Tom de Vries <tdevries@suse.de>
+
+ [gdb/symtab] Don't write .gdb_index symbol table with empty entries
+ When comparing the sizes of the index files generated for shlib
+ outputs/gdb.dwarf2/dw2-zero-range/shr1.sl, I noticed a large difference
+ between .debug_names:
+ ...
+ $ gdb -q -batch $shlib -ex "save gdb-index -dwarf-5 ."
+ $ du -b -h shr1.sl.debug_names shr1.sl.debug_str
+ 61 shr1.sl.debug_names
+ 0 shr1.sl.debug_str
+ ...
+ and .gdb_index:
+ ...
+ $ gdb -q -batch $shlib -ex "save gdb-index ."
+ $ du -b -h shr1.sl.gdb-index
+ 8.2K shr1.sl.gdb-index
+ ...
+
+ The problem is that the .gdb_index contains a non-empty symbol table with only
+ empty entries.
+
+ Fix this by making the symbol table empty, such that we have instead:
+ ...
+ $ du -b -h shr1.sl.gdb-index
+ 184 shr1.sl.gdb-index
+ ...
+
+ Tested on x86_64-linux.
+
+2021-08-27 Tom de Vries <tdevries@suse.de>
+
+ [gdb/testsuite] Generate .debug_aranges in gdb.dlang/watch-loc.exp
+ Before commit 5ef670d81fd "[gdb/testsuite] Add dummy start and end CUs in
+ dwarf assembly" we had in exec outputs/gdb.dlang/watch-loc/watch-loc a D
+ compilation unit at offset 0xc7:
+ ...
+ Compilation Unit @ offset 0xc7:
+ Length: 0x4c (32-bit)
+ Version: 4
+ Abbrev Offset: 0x64
+ Pointer Size: 8
+ <0><d2>: Abbrev Number: 2 (DW_TAG_compile_unit)
+ <d3> DW_AT_language : 19 (D)
+ ...
+ with a corresponding .debug_aranges entry:
+ ...
+ Offset into .debug_info: 0xc7
+ Pointer Size: 4
+ Segment Size: 0
+
+ Address Length
+ 004004a7 0000000b
+ 00000000 00000000
+ ...
+
+ After that commit we have a dummy CU at offset 0xc7 and the D compilation unit
+ at offset 0xd2:
+ ...
+ Compilation Unit @ offset 0xc7:
+ Length: 0x7 (32-bit)
+ Version: 4
+ Abbrev Offset: 0x64
+ Pointer Size: 8
+ Compilation Unit @ offset 0xd2:
+ Length: 0x4c (32-bit)
+ Version: 4
+ Abbrev Offset: 0x65
+ Pointer Size: 8
+ <0><dd>: Abbrev Number: 2 (DW_TAG_compile_unit)
+ <de> DW_AT_language : 19 (D)
+ ...
+ while the .debug_aranges entry still points to 0xc7.
+
+ The problem is that the test-case uses a hack (quoting from
+ commit 75f06e9dc59):
+ ...
+ [ Note: this is a non-trivial test-case. The file watch-loc-dw.S contains a
+ .debug_info section, but not an .debug_aranges section or any actual code.
+ The file watch-loc.c contains code and a .debug_aranges section, but no other
+ debug section. So, the intent for the .debug_aranges section in watch-loc.c
+ is to refer to a compilation unit in the .debug_info section in
+ watch-loc-dw.S. ]
+ ...
+ and adding the dummy CU caused that hack to stop working.
+
+ Fix this by moving the generation of .debug_aranges from watch-loc.c to
+ watch-loc.exp, such that we have:
+ ...
+ Offset into .debug_info: 0xd2
+ Pointer Size: 4
+ Segment Size: 0
+
+ Address Length
+ 004004a7 0000000b
+ 00000000 00000000
+ ...
+
+ Tested on x86_64-linux.
+
+2021-08-27 Tom de Vries <tdevries@suse.de>
+
+ [gdb/testsuite] Generate .debug_aranges entry for dummy CU
+ A best practise for DWARF [1] is to generate .debug_aranges entries for CUs
+ even if they have no address range.
+
+ Generate .debug_arange entries for the dummy CUs added by the DWARF assembler.
+
+ Tested on x86_64-linux.
+
+ [1] http://wiki.dwarfstd.org/index.php?title=Best_Practices
+
+2021-08-27 Tom de Vries <tdevries@suse.de>
+
+ [gdb/testsuite] Add .debug_aranges in more test-cases
+ A couple of test-cases fail when run with target board cc-with-debug-names due
+ to missing .debug_aranges entries for the CUs added by the dwarf assembler.
+
+ Add a .debug_aranges entry for those CUs.
+
+ Tested on x86_64-linux.
+
+2021-08-27 Tom de Vries <tdevries@suse.de>
+
+ [gdb/testsuite] Support .debug_aranges in dwarf assembly
+ Add a proc aranges such that we can generate .debug_aranges sections in dwarf
+ assembly using:
+ ...
+ cu { label cu_label } {
+ ...
+ }
+
+ aranges {} cu_label {
+ arange $addr $len [<comment>] [$segment_selector]
+ }
+ ...
+
+ Tested on x86_64-linux.
+
+2021-08-27 Tom de Vries <tdevries@suse.de>
+
+ [gdb/testsuite] Add label option to proc cu
+ We can use current dwarf assembly infrastructure to declare a label that marks
+ the start of the CU header:
+ ...
+ declare_labels header_start_cu_a
+ _section ".debug_info"
+ header_start_cu_a : cu {} {
+ }
+ _section ".debug_info"
+ header_start_cu_b : cu {} {
+ }
+ ...
+ on the condition that we switch to the .debug_info section before, which makes
+ this style of use fragile.
+
+ Another way to achieve the same is to use the label as generated by the cu
+ proc itself:
+ ...
+ variable _cu_label
+ cu {} {
+ }
+ set header_start_cu_a $_cu_label
+ cu {} {
+ }
+ set header_start_cu_b $_cu_label
+ ...
+ but again that seems fragile given that adding a new CU inbetween will
+ silently result in the wrong value for the label.
+
+ Add a label option to proc cu such that we can simply do:
+ ...
+ cu { label header_start_cu_a } {
+ }
+ cu { label header_start_cu_b } {
+ }
+ ...
+
+ Tested on x86_64-linux.
+
+2021-08-27 GDB Administrator <gdbadmin@sourceware.org>
+
+ Automatic date update in version.in
+
+2021-08-26 Andrew Burgess <andrew.burgess@embecosm.com>
+
+ gdb: remove some stray newlines in debug output
+ I spotted a couple of stray newlines that were left at the end of
+ debug message during conversion to the new debug output scheme. These
+ messages are part of the 'set debug lin-lwp 1' output.
+
+2021-08-26 GDB Administrator <gdbadmin@sourceware.org>
+
+ Automatic date update in version.in
+
+2021-08-25 GDB Administrator <gdbadmin@sourceware.org>
+
+ Automatic date update in version.in
+
+2021-08-24 Tom Tromey <tom@tromey.com>
+
+ Fix two regressions caused by CU / TU merging
+ PR symtab/28160 and PR symtab/27893 concern GDB crashes in the test
+ suite when using the "fission" target board. They are both caused by
+ the patches that merge the list of CUs with the list of TUs (and to a
+ lesser degree by the patches to share DWARF data across objfiles), and
+ the underlying issue is the same: it turns out that reading a DWO can
+ cause new type units to be created. This means that the list of
+ dwarf2_per_cu_data objects depends on precisely which CUs have been
+ expanded. However, because the type units can be created while
+ expanding a CU means that the vector of CUs can expand while it is
+ being iterated over -- a classic mistake. Also, because a TU can be
+ added later, it means the resize_symtabs approach is incorrect.
+
+ This patch fixes resize_symtabs by removing it, and having set_symtab
+ resize the vector on demand. It fixes the iteration problem by
+ introducing a safe (index-based) iterator and changing the relevant
+ spots to use it.
+
+ Bug: https://sourceware.org/bugzilla/show_bug.cgi?id=28160
+ Bug: https://sourceware.org/bugzilla/show_bug.cgi?id=27893
+
+2021-08-24 Alan Modra <amodra@gmail.com>
+
+ Real programmers don't configure gcc using --with-ld
+ * testsuite/lib/ld-lib.exp (run_host_cmd): Give a clue as to why
+ gcc -B doesn't pick up the ld under test.
+
+2021-08-24 Alan Modra <amodra@gmail.com>
+
+ objdump -S test fail on mingw
+ FAIL: objdump -S
+ FAIL: objdump --source-comment
+ is seen on mingw for the simple reason that gcc adds a .exe suffix on
+ the output file if not already present. Fix that, and tidy some objcopy
+ tests.
+
+ * testsuite/lib/binutils-common.exp (exeext): New proc.
+ * testsuite/binutils-all/objcopy.exp (exe, test_prog): Use it here.
+ (objcopy_remove_relocations_from_executable): Catch objcopy errors.
+ Only run on ELF targets.
+ * testsuite/binutils-all/objdump.exp (exe): Set variable.
+ (test_build_id_debuglink, test_objdump_S): Use exe file suffix.
+
+2021-08-24 James Bowman (FTDI-UK) <james.bowman@ftdichip.com>
+
+ FT32: Remove recursion in ft32_opcode
+ The function ft32_opcode used recursion. This could cause a stack
+ overflow. Replaced with a pair of non-recursive functions.
+
+ PR 28169
+ * ft32-dis.c: Formatting.
+ (ft32_opcode1): Split out from..
+ (ft32_opcode): ..here.
+
+2021-08-24 GDB Administrator <gdbadmin@sourceware.org>
+
+ Automatic date update in version.in
+
+2021-08-23 Tom Tromey <tom@tromey.com>
+
+ Fix a latent bug in dw2-ranges-overlap.exp
+ dw2-ranges-overlap.exp creates a program where a psymtab has two
+ address ranges, and a function without debug info whose address is
+ between these two ranges. Then it sets a breakpoint on this function
+ and runs to it, expecting that the language should remain "auto; c"
+ when stopped.
+
+ However, this test case also has a "main" function described (briefly)
+ in the DWARF, and this function is given language C++. Also, a
+ breakpoint stop sets the current language to the language that was
+ used when setting the breakpoint.
+
+ My new DWARF scanner decides that this "main" is the main program and
+ sets the current language to C++ at startup, causing this test to
+ fail.
+
+ This patch fixes the test in a simple way, by introducing a new
+ function that takes the place of "main" in the DWARF. I think this
+ still exercises the original problem, but also avoids problems with my
+ branch.
+
+ It seemed safe to me to submit this separately.
+
+2021-08-23 Tom de Vries <tdevries@suse.de>
+
+ [gdb] Fix 'not in executable format' error message
+ With trying to load a non-executable file into gdb, we run into PR26880:
+ ...
+ $ gdb -q -batch test.c
+ "0x7ffc87bfc8d0s": not in executable format: \
+ file format not recognized
+ ...
+
+ The problem is caused by using %ps in combination with the error function
+ (note that confusingly, it does work in combination with the warning
+ function).
+
+ Fix this by using plain "%s" instead.
+
+ Tested on x86_64-linux.
+
+ gdb/ChangeLog:
+
+ 2021-08-22 Tom de Vries <tdevries@suse.de>
+
+ PR gdb/26880
+ * gdb/exec.c (exec_file_attach): Use %s instead of %ps in call to
+ error function.
+
+ gdb/testsuite/ChangeLog:
+
+ 2021-08-22 Tom de Vries <tdevries@suse.de>
+
+ PR gdb/26880
+ * gdb.base/non-executable.exp: New file.
+
+2021-08-23 Tom de Vries <tdevries@suse.de>
+
+ [gdb/testsuite] Use compiler-generated instead of gas-generated stabs
+ The test-case gdb.dwarf2/dw2-ranges.exp is the only one in the gdb testsuite
+ that uses gas-generated stabs.
+
+ While the use seems natural alongside the use of gas-generated dwarf in the
+ same test-case, there are a few known issues, filed on the gdb side as:
+ - PR symtab/12497 - "stabs: PIE relocation does not work"
+ - PR symtab/28221 - "[readnow, stabs] FAIL: gdb.dwarf2/dw2-ranges.exp: \
+ info line func"
+ and on the gas side as:
+ - PR gas/28233 - "[gas, --gstabs] Generate stabs more similar to gcc"
+
+ The test-case contains a KFAIL for PR12497, but it's outdated and fails to
+ trigger.
+
+ The intention of the test-case is to test gas-generated dwarf, and using
+ gcc-generated stabs instead of gas-generated stabs works fine.
+
+ Supporting compiler-generated stabs is already a corner-case for gdb, and
+ there's no current commitment/incentive to support/workaround gas-generated
+ stabs, which can be considered a corner-case of a corner-case.
+
+ Work around these problem by using compiler-generated stabs in the test-case.
+
+ Tested on x86_64-linux.
+
+ gdb/testsuite/ChangeLog:
+
+ 2021-08-22 Tom de Vries <tdevries@suse.de>
+
+ * gdb.dwarf2/dw2-ranges.exp: Use compiler-generated stabs.
+
+2021-08-23 Tom de Vries <tdevries@suse.de>
+
+ [gdb/testsuite] Add dummy start and end CUs in dwarf assembly
+ Say one compiles a hello.c:
+ ...
+ $ gcc -g hello.c
+ ...
+
+ On openSUSE Leap 15.2 and Tumbleweed, the CU for hello.c is typically not the
+ first in .debug_info, nor the last, due to presence of debug information in
+ objects for sources like:
+ - ../sysdeps/x86_64/start.S
+ - init.c
+ - ../sysdeps/x86_64/crti.S
+ - elf-init.c
+ - ../sysdeps/x86_64/crtn.S.
+
+ On other systems, say ubuntu 18.04.5, the CU for hello.c is typically the
+ first and the last in .debug_info.
+
+ This difference has caused me to find some errors in the dwarf assembly
+ using openSUSE, that didn't show up on other platforms.
+
+ Force the same situation on other platforms by adding a dummy start
+ and end CU.
+
+ Tested on x86_64-linux.
+
+ gdb/testsuite/ChangeLog:
+
+ 2021-08-22 Tom de Vries <tdevries@suse.de>
+
+ PR testsuite/28235
+ * lib/dwarf.exp (Dwarf::dummy_cu): New proc.
+ (Dwarf::assemble): Add dummy start and end CU.
+
+2021-08-23 Tom de Vries <tdevries@suse.de>
+
+ [gdb/testsuite] Fix dw2-ranges-psym.exp with -readnow
+ When running test-case gdb.dwarf2/dw2-ranges-psym.exp with target board
+ -readnow, I run into:
+ ...
+ (gdb) file dw2-ranges-psym^M
+ Reading symbols from dw2-ranges-psym...^M
+ Expanding full symbols from dw2-ranges-psym...^M
+ (gdb) set complaints 0^M
+ (gdb) FAIL: gdb.dwarf2/dw2-ranges-psym.exp: No complaints
+ ...
+
+ The problem is that the regexp expects a gdb prompt immediately after the
+ "Reading symbols" line.
+
+ Fix this by updating the regexp.
+
+ Tested on x86_64-linux.
+
+ gdb/testsuite/ChangeLog:
+
+ 2021-08-22 Tom de Vries <tdevries@suse.de>
+
+ * lib/gdb.exp (gdb_load_no_complaints): Update regexp to allow
+ "Expanding full symbols" Line.
+
+2021-08-23 GDB Administrator <gdbadmin@sourceware.org>
+
+ Automatic date update in version.in
+
+2021-08-22 Mike Frysinger <vapier@gentoo.org>
+
+ sim: m32r: add __linux__ hack for non-Linux hosts
+ The m32r Linux syscall emulation logic assumes the host environment
+ directly matches -- it's being run on 32-bit little endian Linux.
+ This breaks building for non-Linux systems, so put all the code in
+ __linux__ ifdef checks. This code needs a lot of love to make it
+ work everywhere, but let's at least unbreak it for non-Linux hosts.
+
+2021-08-22 GDB Administrator <gdbadmin@sourceware.org>
+
+ Automatic date update in version.in
+
+2021-08-21 GDB Administrator <gdbadmin@sourceware.org>
+
+ Automatic date update in version.in
+
+2021-08-20 Mike Frysinger <vapier@gentoo.org>
+
+ sim: nltvals: switch output mode to a directory
+ In preparation for this script generating more files, change the output
+ argument to specify a directory. This drops the stdout behavior, but
+ since no one really runs this tool directly, it's not a big deal.
+
+2021-08-20 GDB Administrator <gdbadmin@sourceware.org>
+
+ Automatic date update in version.in
+
+2021-08-19 Simon Marchi <simon.marchi@polymtl.ca>
+
+ gdb: use bool in notify_command_param_changed_p and do_set_command
+ Trivial patch to use bool instead of int.
+
+ Change-Id: I9e5f8ee4305272a6671cbaaaf2f0484eff0d1ea5
+
+2021-08-19 H.J. Lu <hjl.tools@gmail.com>
+
+ x86: Put back 3 aborts in OP_E_memory
+ Put back 3 aborts where invalid lengths should have been filtered out.
+
+ gas/
+
+ PR binutils/28247
+ * testsuite/gas/i386/bad-bcast.s: Add a comment.
+
+ opcodes/
+
+ PR binutils/28247
+ * * i386-dis.c (OP_E_memory): Put back 3 aborts.
+
+2021-08-19 H.J. Lu <hjl.tools@gmail.com>
+
+ x86: Avoid abort on invalid broadcast
+ Print "{bad}" on invalid broadcast instead of abort.
+
+ gas/
+
+ PR binutils/28247
+ * testsuite/gas/i386/bad-bcast.d: New file.
+ * testsuite/gas/i386/bad-bcast.s: Likewise.
+ * testsuite/gas/i386/i386.exp: Run bad-bcast.
+
+ opcodes/
+
+ PR binutils/28247
+ * i386-dis.c (OP_E_memory): Print "{bad}" on invalid broadcast
+ instead of abort.
+
+2021-08-19 Aaron Merey <amerey@redhat.com>
+
+ gdb/solib: Refactor scan_dyntag
+ scan_dyntag is unnecessarily duplicated in solib-svr4.c and solib-dsbt.c.
+
+ Move this function to solib.c and rename it to gdb_bfd_scan_elf_dyntag.
+ Also add it to solib.h so it is included in both solib-svr4 and solib-dsbt.
+
+2021-08-19 GDB Administrator <gdbadmin@sourceware.org>
+
+ Automatic date update in version.in
+
+2021-08-18 Will Schmidt <will_schmidt@vnet.ibm.com>
+
+ [gdb] [rs6000] Add ppc64_linux_gcc_target_options method.
+ Add a method to set the gcc target options for the ppc64 targets.
+ This change sets an empty value, which allows the gcc
+ default values (-mcmodel=medium) be used, instead of -mcmodel=large
+ which is set by the default_gcc_target_options hook.
+
+ [gdb] [rs6000] Add ppc64*_gnu_triplet_regexp methods.
+ Add methods to set the target triplet so we can
+ find the proper gcc when our gcc is named of
+ the form powerpc64{le}-<foo>-gcc or ppc64{le}-<foo>-gcc.
+
+2021-08-18 Alan Modra <amodra@gmail.com>
+
+ Re: as: Replace the removed symbol with the versioned symbol
+ Some targets, typically embedded without shared libraries, replace the
+ relocation symbol with a section symbol (see tc_fix_adjustable).
+ Allow the test to pass for such targets. Fixes the following.
+
+ avr-elf +FAIL: symver symver16
+ d10v-elf +FAIL: symver symver16
+ dlx-elf +FAIL: symver symver16
+ ip2k-elf +FAIL: symver symver16
+ m68k-elf +FAIL: symver symver16
+ mcore-elf +FAIL: symver symver16
+ pj-elf +FAIL: symver symver16
+ s12z-elf +FAIL: symver symver16
+ visium-elf +FAIL: symver symver16
+ z80-elf +FAIL: symver symver16
+
+ PR gas/28157
+ * testsuite/gas/symver/symver16.d: Relax reloc match.
+
+2021-08-18 Alan Modra <amodra@gmail.com>
+
+ [GOLD] PowerPC64 relocation overflow for -Os register save/restore funcs
+ Fixes a silly mistake in calculating the address of -Os out-of-line
+ register save/restore function copies. Copies of these linker defined
+ functions are added to stub sections when the original (in
+ target->savres_section) can't be reached.
+
+ * powerpc.cc (Target_powerpc::Relocate::relocate): Correct address
+ calculation of out-of-line save/restore function copies.
+
+2021-08-18 Alan Modra <amodra@gmail.com>
+
+ Another ld script backtrack
+ * ldgram.y (length_spec): Throw away look-ahead NAME.
+
+2021-08-18 Mike Frysinger <vapier@gentoo.org>
+
+ gdb: fix spacing on CCLD silent rules
+
+ sim: nltvals: localize TARGET_<ERRNO> defines
+ Code should not be using these directly, instead they should be
+ resolving these dynamically via cb_host_to_target_errno maps.
+ Fix the Blackfin code and remove the defines out of the header
+ so no new code can rely on them.
+
+2021-08-18 Mike Frysinger <vapier@gentoo.org>
+
+ sim: rename ChangeLog files to ChangeLog-2021
+ Now that ChangeLog entries are no longer used for sim patches,
+ this commit renames all relevant sim ChangeLog to ChangeLog-2021,
+ similar to what we would do in the context of the "Start of New
+ Year" procedure.
+
+ The purpose of this change is to avoid people merging ChangeLog
+ entries by mistake when applying existing commits that they are
+ currently working on.
+
+ Also throw in a .gitignore entry to keep people from adding new
+ ChangeLog files anywhere in the sim tree.
+
+2021-08-18 GDB Administrator <gdbadmin@sourceware.org>
+
+ Automatic date update in version.in
+
+2021-08-17 Simon Marchi <simon.marchi@polymtl.ca>
+
+ gdb: fix thread_step_over_chain_length
+ If I debug a single-thread program and look at the infrun debug logs, I
+ see:
+
+ [infrun] start_step_over: stealing global queue of threads to step, length = 2
+
+ That makes no sense... turns out there's a buglet in
+ thread_step_over_chain_length, "num" should be initialized to 0. I
+ think this bug is a leftover from an earlier version of the code (not
+ merged upstream) that manually walked the list, where the first item was
+ implicitly counted (hence the 1).
+
+ Change-Id: I0af03aa93509aed36528be5076894dc156a0b5ce
+
+2021-08-17 Shahab Vahedi <shahab@synopsys.com>
+
+ opcodes: Fix the auxiliary register numbers for ARC HS
+ The numbers for the auxiliary registers "tlbindex" and
+ "tlbcommand" of ARCv2HS are incorrect. This patch makes
+ the following changes to correct that error.
+
+ ,------------.-----------------.---------------.
+ | aux. reg. | old (incorrect) | new (correct) |
+ |------------+-----------------+---------------|
+ | tlbindex | 0x463 | 0x464 |
+ | tlbcommand | 0x464 | 0x465 |
+ `------------^-----------------^---------------'
+
+ opcodes/
+ 2021-08-17 Shahab Vahedi <shahab@synopsys.com>
+
+ * arc-regs.h (DEF): Fix the register numbers.
+
+2021-08-17 H.J. Lu <hjl.tools@gmail.com>
+
+ gdb: Don't assume r_ldsomap when r_version > 1 on Linux
+ The r_ldsomap field is specific to Solaris (part of librtld_db), and
+ should never be accessed for Linux. glibc is planning to add a field
+ to support multiple namespaces. But there will be no r_ldsomap when
+ r_version is bumped to 2. Add linux_[ilp32|lp64]_fetch_link_map_offsets
+ to set r_ldsomap_offset to -1 and use them for Linux targets.
+
+ Bug: https://sourceware.org/bugzilla/show_bug.cgi?id=28236
+
+2021-08-17 H.J. Lu <hjl.tools@gmail.com>
+
+ gdbserver: Check r_version < 1 for Linux debugger interface
+ Update gdbserver to check r_version < 1 instead of r_version != 1 so
+ that r_version can be bumped for a new field in the glibc debugger
+ interface to support multiple namespaces. Since so far, the gdbserver
+ only reads fields defined for r_version == 1, it is compatible with
+ r_version >= 1.
+
+ All future glibc debugger interface changes will be backward compatible.
+ If there is ever the need for backward incompatible change to the glibc
+ debugger interface, a new DT_XXX element will be provided to access the
+ new incompatible interface.
+
+ Bug: https://sourceware.org/bugzilla/show_bug.cgi?id=11839
+
+2021-08-17 Andrea Corallo <andrea.corallo@arm.com>
+
+ PATCH [4/4] arm: Add Tag_PACRET_use build attribute
+ bfd/
+ 2021-07-06 Andrea Corallo <andrea.corallo@arm.com>
+
+ * elf32-arm.c (elf32_arm_merge_eabi_attributes): Add
+ 'Tag_PACRET_use' case.
+
+ binutils/
+ 2021-07-06 Andrea Corallo <andrea.corallo@arm.com>
+
+ * readelf.c (arm_attr_tag_PAC_extension): Declare.
+ (arm_attr_public_tags): Add 'PAC_extension' lookup.
+
+ elfcpp/
+ 2021-07-06 Andrea Corallo <andrea.corallo@arm.com>
+
+ * arm.h: Define 'Tag_PACRET_use' enum.
+
+ gas/
+ 2021-07-06 Andrea Corallo <andrea.corallo@arm.com>
+
+ * config/tc-arm.c (arm_convert_symbolic_attribute): Add
+ 'Tag_PACRET_use' to the attribute_table.
+
+ include/
+ 2021-07-06 Andrea Corallo <andrea.corallo@arm.com>
+
+ * elf/arm.h (elf_arm_reloc_type): Add 'Tag_PACRET_use'.
+
+2021-08-17 Andrea Corallo <andrea.corallo@arm.com>
+
+ PATCH [3/4] arm: Add Tag_BTI_use build attribute
+ bfd/
+ 2021-07-06 Andrea Corallo <andrea.corallo@arm.com>
+
+ * elf32-arm.c (elf32_arm_merge_eabi_attributes): Add
+ 'Tag_BTI_use' case.
+
+ binutils/
+ 2021-07-06 Andrea Corallo <andrea.corallo@arm.com>
+
+ * readelf.c (arm_attr_tag_PAC_extension): Declare.
+ (arm_attr_public_tags): Add 'PAC_extension' lookup.
+
+ elfcpp/
+ 2021-07-06 Andrea Corallo <andrea.corallo@arm.com>
+
+ * arm.h: Define 'Tag_BTI_use' enum.
+
+ gas/
+ 2021-07-06 Andrea Corallo <andrea.corallo@arm.com>
+
+ * config/tc-arm.c (arm_convert_symbolic_attribute): Add
+ 'Tag_BTI_use' to the attribute_table.
+
+ include/
+ 2021-07-06 Andrea Corallo <andrea.corallo@arm.com>
+
+ * elf/arm.h (elf_arm_reloc_type): Add 'Tag_BTI_use'.
+
+2021-08-17 Andrea Corallo <andrea.corallo@arm.com>
+
+ PATCH [2/4] arm: Add Tag_BTI_extension build attribute
+ bfd/
+ 2021-07-06 Andrea Corallo <andrea.corallo@arm.com>
+
+ * elf32-arm.c (elf32_arm_merge_eabi_attributes): Add
+ 'Tag_BTI_extension' case.
+
+ binutils/
+ 2021-07-06 Andrea Corallo <andrea.corallo@arm.com>
+
+ * readelf.c (arm_attr_tag_PAC_extension): Declare.
+ (arm_attr_public_tags): Add 'PAC_extension' lookup.
+
+ elfcpp/
+ 2021-07-06 Andrea Corallo <andrea.corallo@arm.com>
+
+ * arm.h: Define 'Tag_BTI_extension' enum.
+
+ gas/
+ 2021-07-06 Andrea Corallo <andrea.corallo@arm.com>
+
+ * config/tc-arm.c (arm_convert_symbolic_attribute): Add
+ 'Tag_BTI_extension' to the attribute_table.
+
+ include/
+ 2021-07-06 Andrea Corallo <andrea.corallo@arm.com>
+
+ * elf/arm.h (elf_arm_reloc_type): Add 'Tag_BTI_extension'.
+
+2021-08-17 Andrea Corallo <andrea.corallo@arm.com>
+
+ PATCH [1/4] arm: Add Tag_PAC_extension build attribute
+ bfd/
+ 2021-07-06 Andrea Corallo <andrea.corallo@arm.com>
+
+ * elf32-arm.c (elf32_arm_merge_eabi_attributes): Add
+ 'Tag_PAC_extension' case.
+
+ binutils/
+ 2021-07-06 Andrea Corallo <andrea.corallo@arm.com>
+
+ * readelf.c (arm_attr_tag_PAC_extension): Declare.
+ (arm_attr_public_tags): Add 'PAC_extension' lookup.
+
+ elfcpp/
+ 2021-07-06 Andrea Corallo <andrea.corallo@arm.com>
+
+ * arm.h: Define 'Tag_PAC_extension' enum.
+
+ gas/
+ 2021-07-06 Andrea Corallo <andrea.corallo@arm.com>
+
+ * config/tc-arm.c (arm_convert_symbolic_attribute): Add
+ 'Tag_PAC_extension' to the attribute_table.
+
+ include/
+ 2021-07-06 Andrea Corallo <andrea.corallo@arm.com>
+
+ * elf/arm.h (elf_arm_reloc_type): Add 'Tag_PAC_extension'.
+
+2021-08-17 H.J. Lu <hjl.tools@gmail.com>
+
+ x86: Always run fp tests
+ Always run fp tests since the size of .tfloat, .ds.x, .dc.x and .dcb.x
+ directive outputs is always 10 bytes. There is no need for fp-elf32 nor
+ fp-elf64.
+
+ PR gas/28230
+ * testsuite/gas/i386/fp-elf32.d: Removed.
+ * testsuite/gas/i386/fp-elf64.d: Likewise.
+ * testsuite/gas/i386/fp.s: Remove NO_TFLOAT_PADDING codes.
+ * testsuite/gas/i386/i386.exp: Don't run fp-elf32 nor fp-elf64.
+ Always run fp.
+
+2021-08-17 GDB Administrator <gdbadmin@sourceware.org>
+
+ Automatic date update in version.in
+
+2021-08-16 H.J. Lu <hjl.tools@gmail.com>
+
+ x86: Don't pad .tfloat directive output
+ .tfloat output should always be 10 bytes without padding, independent
+ of psABIs. In glibc, x86 assembly codes expect 10-byte .tfloat output.
+ This also reduces .ds.x output and .tfloat output with hex input from
+ 12 bytes to 10 bytes to match .tfloat output.
+
+ PR gas/28230
+ * NEWS: Mention changes of .ds.x output and .tfloat output with
+ hex input.
+ * config/tc-i386.c (x86_tfloat_pad): Removed.
+ * config/tc-i386.h (X_PRECISION_PAD): Changed to 0.
+ (x86_tfloat_pad): Removed.
+ * testsuite/gas/i386/fp.s: If NO_TFLOAT_PADDING isn't defined,
+ add explicit paddings after .tfloat, .ds.x, .dc.x and .dcb.x
+ directives.
+ * testsuite/gas/i386/i386.exp (ASFLAGS): Append
+ "--defsym NO_TFLOAT_PADDING=1" when running the fp test.
+
+2021-08-16 Tom Tromey <tromey@adacore.com>
+
+ Fix register regression in DWARF evaluator
+ On an internal test case, using an arm-elf target, commit ba5bc3e5a92
+ ("Make DWARF evaluator return a single struct value") causes a
+ regression. (It doesn't happen for any of the other cross targets
+ that I test when importing upstream gdb.)
+
+ I don't know if there's an upstream gdb test case showing the same
+ problem... I can only really run native tests with dejagnu AFAIK.
+
+ The failure manifests like this:
+
+ Breakpoint 1, file_1.export_1 (param_1=<error reading variable: Unable to access DWARF register number 64>, str=...) at [...]/file_1.adb:5
+
+ Whereas when it works it looks like:
+
+ Breakpoint 1, file_1.export_1 (param_1=99.0, str=...) at [...]/file_1.adb:5
+
+ The difference is that the new code uses the passed-in gdbarch,
+ whereas the old code used the frame's gdbarch, when handling
+ DWARF_VALUE_REGISTER.
+
+ This patch restores the use of the frame's arch.
+
+2021-08-16 Tom Tromey <tromey@adacore.com>
+
+ Fix Ada regression due to DWARF expression series
+ Commit 0579205aec4 ("Simplify dwarf_expr_context class interface")
+ caused a regression in the internal AdaCore test suite. I didn't try
+ to reproduce this with the GDB test suite, but the test is identical
+ to gdb.dwarf2/dynarr-ptr.exp.
+
+ The problem is that this change:
+
+ case DW_OP_push_object_address:
+ /* Return the address of the object we are currently observing. */
+ - if (this->data_view.data () == nullptr
+ - && this->obj_address == 0)
+ + if (this->m_addr_info == nullptr)
+
+ ... slightly changes the logic here. In particular, it's possible for
+ the caller to pass in a non-NULL m_addr_info, but one that looks like:
+
+ (top) p *this.m_addr_info
+ $15 = {
+ type = 0x29b7a70,
+ valaddr = {
+ m_array = 0x0,
+ m_size = 0
+ },
+ addr = 0,
+ next = 0x0
+ }
+
+ In this case, an additional check is needed. With the current code,
+ what happens instead is that the computation computes an incorrect
+ address -- but one that does not fail in read_memory, due to the
+ precise memory map of the embedded target in question.
+
+ This patch restores the old logic.
+
+2021-08-16 Patrick Monnerat <patrick@monnerat.net>
+
+ Notify observer of breakpoint auto-disabling
+ As breakpoint_modified observer is currently notified upon breakpoint stop
+ before handling auto-disabling when enable count is reached, the observer
+ is never notified of the disabling.
+
+ The problem affects:
+ - The MI interpreter enabled= value when reporting =breakpoint-modified
+ - A Python event handler for breakpoint_modified using the "enabled"
+ member of its parameter
+ - insight: breakpoint GUI window is not properly updated upon auto-disable
+
+ This patch moves the observer notification after the auto-disabling
+ code and implements corresponding tests for the MI and Python cases.
+
+ Fixes https://sourceware.org/bugzilla/show_bug.cgi?id=23336
+
+ Change-Id: I0c50df4789334071e5390cb46b3ca0d4a7f83c61
+
+2021-08-16 H.J. Lu <hjl.tools@gmail.com>
+
+ as: Replace the removed symbol with the versioned symbol
+ When a symbol removed by .symver is used in relocation and there is one
+ and only one versioned symbol, don't remove the symbol. Instead, mark
+ it to be removed and replace the removed symbol used in relocation with
+ the versioned symbol before generating relocation.
+
+ PR gas/28157
+ * symbols.c (symbol_flags): Add removed.
+ (symbol_entry_find): Updated.
+ (symbol_mark_removed): New function.
+ (symbol_removed_p): Likewise.
+ * symbols.h (symbol_mark_removed): New prototype.
+ (symbol_removed_p): Likewise.
+ * write.c (write_relocs): Call obj_fixup_removed_symbol on
+ removed fixp->fx_addsy and fixp->fx_subsy if defined.
+ (set_symtab): Don't add a symbol if symbol_removed_p returns true.
+ * config/obj-elf.c (elf_frob_symbol): Don't remove the symbol
+ if it is used on relocation. Instead, mark it as to be removed
+ and issue an error if the symbol has more than one versioned name.
+ (elf_fixup_removed_symbol): New function.
+ * config/obj-elf.h (elf_fixup_removed_symbol): New prototype.
+ (obj_fixup_removed_symbol): New.
+ * testsuite/gas/symver/symver11.d: Updated expected error
+ message.
+ * testsuite/gas/symver/symver16.d: New file.
+ * testsuite/gas/symver/symver16.s: Likewise.
+
+2021-08-16 GDB Administrator <gdbadmin@sourceware.org>
+
+ Automatic date update in version.in
+
+2021-08-15 GDB Administrator <gdbadmin@sourceware.org>
+
+ Automatic date update in version.in
+
+2021-08-14 Alan Modra <amodra@gmail.com>
+
+ ld script fill pattern expression
+ It turns out we do need to backtrack when parsing after all. The
+ fill_opt component in the section rule swiches to EXPRESSION and back
+ to SCRIPT, and to find the end of an expression it is necessary to
+ look ahead one token.
+
+ * ldgram.y (section): Throw away lookahead NAME token.
+ (overlay_section): Likewise.
+ * testsuite/ld-elf/overlay.t: Add fill pattern on overlays.
+ Test fill pattern before stupidly named normal sections too,
+ and before /DISCARD/.
+
+2021-08-14 GDB Administrator <gdbadmin@sourceware.org>
+
+ Automatic date update in version.in
+
+2021-08-13 Alan Modra <amodra@gmail.com>
+
+ ld lexer tidy, possibly break the world
+ This tidies the states in which ld lexer rules are enabled.
+ This change will quite likely trip over issues similar to those
+ mentioned in the new ldlex.l comments, so please test it out.
+
+ * ldgram.y (wildcard_name): Remove now unnecessary components.
+ * ldlex.l: Restrict many rules' states. Remove -l expression
+ state rule. Comment on lookahead state madness and need for
+ /DISCARD/ in expression state.
+
+2021-08-13 Alan Modra <amodra@gmail.com>
+
+ ld script lower-case absolute and sizeof_headers
+ I think these happened by accident, so let's see what breaks if they
+ are removed.
+
+ * ldlex.l: Remove lower case "absolute" and "sizeof_headers"
+ in non-mri mode.
+ * ld.texi: Remove sizeof_headers index.
+ * testsuite/ld-mmix/mmohdr1.ld: Use SIZEOF_HEADERS.
+
+2021-08-13 Alan Modra <amodra@gmail.com>
+
+ tidy mri script extern
+ MRI mode generally doesn't flip lexer states, so let's make MRI mode
+ "extern" not do so either.
+
+ * ldgram.y (extern_name_list): Don't change lex state here.
+ (ifile_p1): Change state here on EXTERN instead.
+
+2021-08-13 Alan Modra <amodra@gmail.com>
+
+ Re: PR28217, Syntax error when memory region contains a hyphen
+ I discovered some more errors when tightening up the lexer rules.
+ Just because we INCLUDE a file doesn't mean we've switched states.
+
+ PR 28217
+ * ldgram.y (statement): Don't switch lexer state on INCLUDE.
+ (mri_script_command, ifile_p1, memory_spec, section): Likewise.
+
+2021-08-13 Lifang Xia <lifang_xia@c-sky.com>
+
+ PR28168: [CSKY] Fix stack overflow in disassembler
+ PR 28168:
+ Stack overflow with a large float. %f is not a goot choice for this.
+ %f should be replaced with %.7g.
+
+ gas/
+ * testsuite/gas/csky/pr28168.d: New testcase for PR 28168.
+ * testsuite/gas/csky/pr28168.s: Likewise.
+ * testsuite/gas/csky/v2_float_part2.d: Following the new format.
+ * opcodes/csky-dis.c (csky_output_operand): %.7g replaces %f.
+
+2021-08-13 Alan Modra <amodra@gmail.com>
+
+ PR28217, Syntax error when memory region contains a hyphen
+ The saga of commit 40726f16a8d7 continues. This attacks the problem
+ of switching between SCRIPT and EXPRESSION state lexing by removing
+ the need to do so for phdrs like ":text". Instead {WILDCHAR}*
+ matching, the reason why ":text" lexed as one token, is restricted to
+ within the braces of a section or overlay statement. The new WILD
+ lexer state is switched at the non-optional brace tokens, so
+ ldlex_backup is no longer needed. I've also removed the BOTH state,
+ which doesn't seem to be needed any more. Besides rules involving
+ error reporting, there was just one place where SCRIPT appeared
+ without BOTH, the {WILDCHAR}* rule, three where BOTH appears without
+ SCRIPT for tokens that only need EXPRESSION state, and two where BOTH
+ appears alongside INPUT_LIST. (Since I'm editing the wild and
+ filename rules, removing BOTH and adding WILD can also be seen as
+ renaming the old BOTH state to SCRIPT and renaming the old SCRIPT
+ state to WILD with a reduced scope.)
+
+ As a followup, I'll look at removing EXPRESSION state from some lexer
+ rules that no longer need it due to this cleanup.
+
+ PR 28217
+ * ldgram.y (exp <ORIGIN, LENGTH>): Use paren_script_name.
+ (section): Parse within braces of section in wild mode, and
+ after brace back in script mode. Remove ldlex_backup call.
+ Similarly for OVERLAY.
+ (overlay_section): Similarly.
+ (script_file): Replace ldlex_both with ldlex_script.
+ * ldlex.h (ldlex_wild): Declare.
+ (ldlex_both): Delete.
+ * ldlex.l (BOTH): Delete. Remove state from all rules.
+ (WILD): New state. Enable many tokens in this state.
+ Enable filename match in SCRIPT mode. Enable WILDCHAR match
+ in WILD state, disable in SCRIPT mode.
+ (ldlex_wild): New function.
+ * ldfile.c (ldfile_try_open_bfd): Replace ldlex_both call with
+ ldlex_script.
+
+2021-08-13 Alan Modra <amodra@gmail.com>
+
+ ns32k configury
+ Since ns32k-netbsd is as yet not removed, just marked obsolete,
+ the target should still be accepted with --enable-obsolete.
+
+ I also enabled ns32k-openbsd in ld since there doesn't seem to be a
+ good reason why that target is not supported there but is elsewhere.
+
+ bfd/
+ * config.bfd: Allow ns32k-netbsd.
+ ld/
+ * configure.tgt: Allow ns32k-openbsd.
+
+2021-08-13 GDB Administrator <gdbadmin@sourceware.org>
+
+ Automatic date update in version.in
+
+2021-08-13 Lancelot SIX <lsix@lancelotsix.com>
+
+ gdb: riscv_scan_prologue: handle LD and LW instructions
+ While working on the testsuite, I ended up noticing that GDB fails to
+ produce a full backtrace from a thread waiting in pthread_join. When
+ selecting the waiting thread and using the 'bt' command, the following
+ result can be observed:
+
+ (gdb) bt
+ #0 0x0000003ff7fccd20 in __futex_abstimed_wait_common64 () from /lib/riscv64-linux-gnu/libpthread.so.0
+ #1 0x0000003ff7fc43da in __pthread_clockjoin_ex () from /lib/riscv64-linux-gnu/libpthread.so.0
+ Backtrace stopped: frame did not save the PC
+
+ On my platform, I do not have debug symbols for glibc, so I need to rely
+ on prologue analysis in order to unwind stack.
+
+ Here is what the function prologue looks like:
+
+ (gdb) disassemble __pthread_clockjoin_ex
+ Dump of assembler code for function __pthread_clockjoin_ex:
+ 0x0000003ff7fc42de <+0>: addi sp,sp,-144
+ 0x0000003ff7fc42e0 <+2>: sd s5,88(sp)
+ 0x0000003ff7fc42e2 <+4>: auipc s5,0xd
+ 0x0000003ff7fc42e6 <+8>: ld s5,-2(s5) # 0x3ff7fd12e0
+ 0x0000003ff7fc42ea <+12>: ld a5,0(s5)
+ 0x0000003ff7fc42ee <+16>: sd ra,136(sp)
+ 0x0000003ff7fc42f0 <+18>: sd s0,128(sp)
+ 0x0000003ff7fc42f2 <+20>: sd s1,120(sp)
+ 0x0000003ff7fc42f4 <+22>: sd s2,112(sp)
+ 0x0000003ff7fc42f6 <+24>: sd s3,104(sp)
+ 0x0000003ff7fc42f8 <+26>: sd s4,96(sp)
+ 0x0000003ff7fc42fa <+28>: sd s6,80(sp)
+ 0x0000003ff7fc42fc <+30>: sd s7,72(sp)
+ 0x0000003ff7fc42fe <+32>: sd s8,64(sp)
+ 0x0000003ff7fc4300 <+34>: sd s9,56(sp)
+ 0x0000003ff7fc4302 <+36>: sd a5,40(sp)
+
+ As far as prologue analysis is concerned, the most interesting part is
+ done at address 0x0000003ff7fc42ee (<+16>): 'sd ra,136(sp)'. This stores
+ the RA (return address) register on the stack, which is the information
+ we are looking for in order to identify the caller.
+
+ In the current implementation of the prologue scanner, GDB stops when
+ hitting 0x0000003ff7fc42e6 (<+8>) because it does not know what to do
+ with the 'ld' instruction. GDB thinks it reached the end of the
+ prologue but have not yet reached the important part, which explain
+ GDB's inability to unwind past this point.
+
+ The section of the prologue starting at <+4> until <+12> is used to load
+ the stack canary[1], which will then be placed on the stack at <+36> at
+ the end of the prologue.
+
+ In order to have the prologue properly handled, this commit proposes to
+ add support for the ld instruction in the RISC-V prologue scanner.
+ I guess riscv32 would use lw in such situation so this patch also adds
+ support for this instruction.
+
+ With this patch applied, gdb is now able to unwind past pthread_join:
+
+ (gdb) bt
+ #0 0x0000003ff7fccd20 in __futex_abstimed_wait_common64 () from /lib/riscv64-linux-gnu/libpthread.so.0
+ #1 0x0000003ff7fc43da in __pthread_clockjoin_ex () from /lib/riscv64-linux-gnu/libpthread.so.0
+ #2 0x0000002aaaaaa88e in bar() ()
+ #3 0x0000002aaaaaa8c4 in foo() ()
+ #4 0x0000002aaaaaa8da in main ()
+
+ I have had a look to see if I could reproduce this easily, but in my
+ simple testcases using '-fstack-protector-all', the canary is loaded
+ after the RA register is saved. I do not have a reliable way of
+ generating a prologue similar to the problematic one so I forged one
+ instead.
+
+ The testsuite have been run on riscv64 ubuntu 21.01 with no regression
+ observed.
+
+ [1] https://en.wikipedia.org/wiki/Buffer_overflow_protection#Canaries
+
+2021-08-12 Tom Tromey <tromey@adacore.com>
+
+ Update documentation to mention Pygments
+ Philippe Blain pointed out that the gdb documentation does not mention
+ that Pygments may be used for source highlighting. This patch updates
+ the docs to reflect how highlighting is actually done.
+
+2021-08-12 Simon Marchi <simon.marchi@polymtl.ca>
+
+ gdb: make gdbarch_printable_names return a vector
+ I noticed that gdbarch_selftest::operator() leaked the value returned by
+ gdbarch_printable_names. Make gdbarch_printable_names return an
+ std::vector and update callers. That makes it easier for everyone
+ involved, less manual memory management.
+
+ Change-Id: Ia8fc028bdb91f787410cca34f10bf3c5a6da1498
+
+2021-08-12 Carl Love <cel@us.ibm.com>
+
+ Improve forward progress test in python.exp
+ The test steps into func2 and than does an up to get back to the previous
+ frame. The test checks that the line number you are at after the up command
+ is greater than the line where the function was called from. The
+ assembly/codegen for the powerpc target includes a NOP after the
+ branch-link.
+
+ func2 (); /* Break at func2 call site. /
+ 10000694: 59 00 00 48 bl 100006ec
+ 10000698: 00 00 00 60 nop
+ return 0; / Break to end. */
+ 1000069c: 00 00 20 39 li r9,0
+
+ The PC at the instruction following the branch-link is 0x10000698 which
+ GDB.find_pc_line() maps to the same line number as the bl instruction.
+ GDB did move past the branch-link location thus making forward progress.
+
+ The following proposed fix adds an additional PC check to see if forward
+ progress was made. The line test is changed from greater than to greater
+ than or equal.
+
+2021-08-12 Jiangshuai Li <jiangshuai_li@c-sky.com>
+
+ gdb:csky rm tdesc_has_registers in csky_register_name
+ As CSKY arch has not parsed target-description.xml in csky_gdbarch_init,
+ when a remote server, like csky-qemu or gdbserver, send a target-description.xml
+ to gdb, tdesc_has_registers will return ture, but tdesc_register_name (gdbarch, 0)
+ will return NULL, so a cmd "info registers r0" will not work.
+
+ Function of parsing target-description.xml will be add later for CSKY arch,
+ now it is temporarily removed to allow me to do other supported tests.
+
+ 2021-07-15 Jiangshuai Li <jiangshuai_li@c-sky.com>
+
+ * csky-tdep.c : not using tdesc funtions in csky_register_name
+
+2021-08-12 Alan Modra <amodra@gmail.com>
+
+ Re: gas: support NaN flavors
+ Fixes tic4x-coff FAIL: simple FP constants
+
+ * testsuite/gas/all/float.s: Make NaN tests conditional on hasnan.
+ * testsuite/gas/all/gas.exp: Define hasnan.
+
+2021-08-12 GDB Administrator <gdbadmin@sourceware.org>
+
+ Automatic date update in version.in
+
+2021-08-11 H.J. Lu <hjl.tools@gmail.com>
+
+ ld: Update the pass and fail strings of PR ld/28138 test
+ PR ld/28138
+ * testsuite/ld-plugin/lto.exp: Update the pass and fail strings
+ of PR ld/28138 test to indicate which part of the test passed
+ and failed.
+
+2021-08-11 Darius Galis <darius.galis@cyberthorstudios.com>
+
+ Fix a typo in the RX asse,bler. The Double-precision floating-point exception handling control register name is DECNT not DCENT.
+ * config/rx-parse.y (DECNT): Fixed typo.
+ * testsuite/gas/rx/dpopm.sm (DECNT): Fixed typo.
+ * testsuite/gas/rx/dpushm.sm (DECNT): Fixed typo.
+ * testsuite/gas/rx/macros.inc (DECNT): Fixed typo.
+
+2021-08-11 Nick Clifton <nickc@redhat.com>
+
+ Fix an internal error in the CSKY assembler when asked to resolve an overlarge constant.
+ PR 28215
+ * config/tc-csky.c (md_apply_fix): Correctly handle a fixup that
+ involves an overlarge constant.
+
+2021-08-11 Luis Machado <luis.machado@linaro.org>
+
+ Add 3 new PAC-related ARM note types
+ The following patch synchronizes includes/objdump/readelf with the Linux
+ Kernel in terms of ARM regset notes.
+
+ We're currently missing 3 of them:
+
+ NT_ARM_PACA_KEYS
+ NT_ARM_PACG_KEYS
+ NT_ARM_PAC_ENABLED_KEYS
+
+ We don't need GDB to bother with this at the moment, so this doesn't update
+ bfd/elf.c. If needed, we can do it in the future.
+
+ binutils/
+
+ * readelf.c (get_note_type): Handle new ARM PAC notes.
+
+ include/elf/
+
+ * common.h (NT_ARM_PACA_KEYS, NT_ARM_PACG_KEYS)
+ (NT_ARM_PAC_ENABLED_KEYS): New constants.
+
+2021-08-11 Nick Clifton <nickc@redhat.com>
+
+ Updated Portuguese translation for the binutils sub-directory.
+
+2021-08-11 John Ericson <git@JohnEricson.me>
+
+ Deprecate a.out support for NetBSD targets.
+ As discussed previously, a.out support is now quite deprecated, and in
+ some cases removed, in both Binutils itself and NetBSD, so this legacy
+ default makes little sense. `netbsdelf*` and `netbsdaout*` still work
+ allowing the user to be explicit about there choice. Additionally, the
+ configure script warns about the change as Nick Clifton requested.
+
+ One possible concern was the status of NetBSD on NS32K, where only a.out
+ was supported. But per [1] NetBSD has removed support, and if it were to
+ come back, it would be with ELF. The binutils implementation is
+ therefore marked obsolete, per the instructions in the last message.
+
+ With that patch and this one applied, I have confirmed the following:
+
+ --target=i686-unknown-netbsd
+ --target=i686-unknown-netbsdelf
+ builds completely
+
+ --target=i686-unknown-netbsdaout
+ properly fails because target is deprecated.
+
+ --target=vax-unknown-netbsdaout builds completely except for gas, where
+ the target is deprecated.
+
+ [1]: https://mail-index.netbsd.org/tech-toolchain/2021/07/19/msg004025.html
+ ---
+ bfd/config.bfd | 43 +++++++++++++--------
+ bfd/configure.ac | 5 +--
+ binutils/testsuite/binutils-all/nm.exp | 2 +-
+ binutils/testsuite/lib/binutils-common.exp | 7 +---
+ config/picflag.m4 | 4 +-
+ gas/configure.tgt | 9 +++--
+ gas/testsuite/gas/arm/blx-bl-convert.d | 2 +-
+ gas/testsuite/gas/arm/blx-local-thumb.d | 2 +-
+ gas/testsuite/gas/sh/basic.exp | 2 +-
+ gdb/configure.host | 34 +++++++----------
+ gdb/configure.tgt | 2 +-
+ gdb/testsuite/gdb.asm/asm-source.exp | 6 +--
+ intl/configure | 2 +-
+ ld/configure.tgt | 44 +++++++++++-----------
+ ld/testsuite/ld-arm/arm-elf.exp | 4 +-
+ ld/testsuite/ld-elf/elf.exp | 2 +-
+ ld/testsuite/ld-elf/shared.exp | 4 +-
+ libiberty/configure | 4 +-
+
+2021-08-11 Andrew Burgess <andrew.burgess@embecosm.com>
+
+ gdb: don't print backtrace when dumping core after an internal error
+ Currently, when GDB hits an internal error, and the user selects to
+ dump core, the recently added feature to write a backtrace to the
+ console will kick in, and print a backtrace as well as dumping the
+ core.
+
+ This was certainly not my intention when adding the backtrace on fatal
+ signal functionality, this feature was intended to produce a backtrace
+ when GDB crashes due to some fatal signal, internal errors should have
+ continued to behave as they did before, unchanged.
+
+ In this commit I set the signal disposition of SIGABRT back to SIG_DFL
+ just prior to the call to abort() that GDB uses to trigger the core
+ dump, this prevents GDB reaching the code that writes the backtrace to
+ the console.
+
+ I've also added a test that checks we don't see a backtrace on the
+ console after an internal error.
+
+2021-08-11 Andrew Burgess <andrew.burgess@embecosm.com>
+
+ gdb: register SIGBUS, SIGFPE, and SIGABRT handlers
+ Register handlers for SIGBUS, SIGFPE, and SIGABRT. All of these
+ signals are setup as fatal signals that will cause GDB to terminate.
+ However, by passing these signals through the handle_fatal_signal
+ function, a user can arrange to see a backtrace when GDB
+ terminates (see maint set backtrace-on-fatal-signal).
+
+ In normal use of GDB there should be no user visible changes after
+ this commit. Only if GDB terminates with one of the above signals
+ will GDB change slightly, potentially printing a backtrace before
+ aborting.
+
+ I've added new tests for SIGFPE, SIGBUS, and SIGABRT.
+
+2021-08-11 Andrew Burgess <andrew.burgess@embecosm.com>
+
+ gdb: print backtrace on fatal SIGSEGV
+ This commit adds a new maintenance feature, the ability to print
+ a (limited) backtrace if GDB dies due to a fatal signal.
+
+ The backtrace is produced using the backtrace and backtrace_symbols_fd
+ functions which are declared in the execinfo.h header, and both of
+ which are async signal safe. A configure check has been added to
+ check for these features, if they are not available then the new code
+ is not compiled into GDB and the backtrace will not be printed.
+
+ The motivation for this new feature is to aid in debugging GDB in
+ situations where GDB has crashed at a users site, but the user is
+ reluctant to share core files, possibly due to concerns about what
+ might be in the memory image within the core file. Such a user might
+ be happy to share a simple backtrace that was written to stderr.
+
+ The production of the backtrace is on by default, but can switched off
+ using the new commands:
+
+ maintenance set backtrace-on-fatal-signal on|off
+ maintenance show backtrace-on-fatal-signal
+
+ Right now, I have hooked this feature in to GDB's existing handling of
+ SIGSEGV only, but this will be extended to more signals in a later
+ commit.
+
+ One additional change I have made in this commit is that, when we
+ decide GDB should terminate due to the fatal signal, we now
+ raise the same fatal signal rather than raising SIGABRT.
+
+ Currently, this is only effecting our handling of SIGSEGV. So,
+ previously, if GDB hit a SEGV then we would terminate GDB with a
+ SIGABRT. After this commit we will terminate GDB with a SIGSEGV.
+
+ This feels like an improvement to me, we should still get a core dump,
+ but in many shells, the user will see a more specific message once GDB
+ exits, in bash for example "Segmentation fault" rather than "Aborted".
+
+ Finally then, here is an example of the output a user would see if GDB
+ should hit an internal SIGSEGV:
+
+ Fatal signal: Segmentation fault
+ ----- Backtrace -----
+ ./gdb/gdb[0x8078e6]
+ ./gdb/gdb[0x807b20]
+ /lib64/libpthread.so.0(+0x14b20)[0x7f6648c92b20]
+ /lib64/libc.so.6(__poll+0x4f)[0x7f66484d3a5f]
+ ./gdb/gdb[0x1540f4c]
+ ./gdb/gdb[0x154034a]
+ ./gdb/gdb[0x9b002d]
+ ./gdb/gdb[0x9b014d]
+ ./gdb/gdb[0x9b1aa6]
+ ./gdb/gdb[0x9b1b0c]
+ ./gdb/gdb[0x41756d]
+ /lib64/libc.so.6(__libc_start_main+0xf3)[0x7f66484041a3]
+ ./gdb/gdb[0x41746e]
+ ---------------------
+ A fatal error internal to GDB has been detected, further
+ debugging is not possible. GDB will now terminate.
+
+ This is a bug, please report it. For instructions, see:
+ <https://www.gnu.org/software/gdb/bugs/>.
+
+ Segmentation fault (core dumped)
+
+ It is disappointing that backtrace_symbols_fd does not actually map
+ the addresses back to symbols, this appears, in part, to be due to GDB
+ not being built with -rdynamic as the manual page for
+ backtrace_symbols_fd suggests, however, even when I do add -rdynamic
+ to the build of GDB I only see symbols for some addresses.
+
+ We could potentially look at alternative libraries to provide the
+ backtrace (e.g. libunwind) however, the solution presented here, which
+ is available as part of glibc is probably a good baseline from which
+ we might improve things in future.
+
+2021-08-11 Andrew Burgess <andrew.burgess@embecosm.com>
+
+ gdb: rename async_init_signals to gdb_init_signals
+ The async_init_signals has, for some time, dealt with async and sync
+ signals, so removing the async prefix makes sense I think.
+
+ Additionally, as pointed out by Pedro:
+
+ .....
+
+ The comments relating to SIGTRAP and SIGQUIT within this function are
+ out of date.
+
+ The comments for SIGTRAP talk about the signal disposition (SIG_IGN)
+ being passed to the inferior, meaning the signal disposition being
+ inherited by GDB's fork children. However, we now call
+ restore_original_signals_state prior to forking, so the comment on
+ SIGTRAP is redundant.
+
+ The comments for SIGQUIT are similarly out of date, further, the
+ comment on SIGQUIT talks about problems with BSD4.3 and vfork,
+ however, we have not supported BSD4.3 for several years now.
+
+ Given the above, it seems that changing the disposition of SIGTRAP is
+ no longer needed, so I've deleted the signal() call for SIGTRAP.
+
+ Finally, the header comment on the function now called
+ gdb_init_signals was getting quite out of date, so I've updated it
+ to (hopefully) better reflect reality.
+
+ There should be no user visible change after this commit.
+
+2021-08-11 Andrew Burgess <andrew.burgess@embecosm.com>
+
+ gdb: register signal handler after setting up event token
+ This commit fixes the smallest of small possible bug related to signal
+ handling. If we look in async_init_signals we see code like this:
+
+ signal (SIGQUIT, handle_sigquit);
+ sigquit_token =
+ create_async_signal_handler (async_do_nothing, NULL, "sigquit");
+
+ Then if we look in handle_sigquit we see code like this:
+
+ mark_async_signal_handler (sigquit_token);
+ signal (sig, handle_sigquit);
+
+ Finally, in mark_async_signal_handler we have:
+
+ async_handler_ptr->ready = 1;
+
+ Where async_handler_ptr will be sigquit_token.
+
+ What this means is that if a SIGQUIT arrive in async_init_signals
+ after handle_sigquit has been registered, but before sigquit_token has
+ been initialised, then GDB will most likely crash.
+
+ The chance of this happening is tiny, but fixing this is trivial, just
+ ensure we call create_async_signal_handler before calling signal, so
+ lets do that.
+
+ There are no tests for this. Trying to land a signal in the right
+ spot is pretty hit and miss. I did try changing the current HEAD GDB
+ like this:
+
+ signal (SIGQUIT, handle_sigquit);
+ raise (SIGQUIT);
+ sigquit_token =
+ create_async_signal_handler (async_do_nothing, NULL, "sigquit");
+
+ And confirmed that this did result in a crash, after my change I tried
+ this:
+
+ sigquit_token =
+ create_async_signal_handler (async_do_nothing, NULL, "sigquit");
+ signal (SIGQUIT, handle_sigquit);
+ raise (SIGQUIT);
+
+ And GDB now starts up just fine.
+
+ gdb/ChangeLog:
+
+ * event-top.c (async_init_signals): For each signal, call signal
+ only after calling create_async_signal_handler.
+
+2021-08-11 Andrew Burgess <andrew.burgess@embecosm.com>
+
+ gdb: terminate upon receipt of SIGFPE
+ GDB's SIGFPE handling is broken, this is PR gdb/16505 and
+ PR gdb/17891.
+
+ We currently try to use an async event token to process SIGFPE. So,
+ when a SIGFPE arrives the signal handler calls
+ mark_async_signal_handler then returns, effectively ignoring the
+ signal (for now).
+
+ The intention is that later the event loop will see that the async
+ token associated with SIGFPE has been marked and will call the async
+ handler, which just throws an error.
+
+ The problem is that SIGFPE is not safe to ignore. Ignoring a
+ SIGFPE (unless it is generated artificially, e.g. by raise()) is
+ undefined behaviour, after ignoring the signal on many targets we
+ return to the instruction that caused the SIGFPE to be raised, which
+ immediately causes another SIGFPE to be raised, we get stuck in an
+ infinite loop. The behaviour is certainly true on x86-64.
+
+ To view this behaviour I simply added some dummy code to GDB that
+ performed an integer divide by zero, compiled this on x86-64
+ GNU/Linux, ran GDB and saw GDB hang.
+
+ In this commit, I propose to remove all special handling of SIGFPE and
+ instead just let GDB make use of the default SIGFPE action, that is,
+ to terminate the process.
+
+ The only user visible change here should be:
+
+ - If a user sends a SIGFPE to GDB using something like kill,
+ previously GDB would just print an error and remain alive, now GDB
+ will terminate. This is inline with what happens if the user
+ sends GDB a SIGSEGV from kill though, so I don't see this as an
+ issue.
+
+ - If a bug in GDB causes a real SIGFPE, previously the users GDB
+ session would hang. Now the GDB session will terminate. Again,
+ this is inline with what happens if GDB receives a SIGSEGV due to
+ an internal bug.
+
+ In bug gdb/16505 there is mention that it would be nice if GDB did
+ more than just terminate when receiving a fatal signal. I haven't
+ done that in this commit, but later commits will move in that
+ direction.
+
+ Bug: https://sourceware.org/bugzilla/show_bug.cgi?id=16505
+ Bug: https://sourceware.org/bugzilla/show_bug.cgi?id=17891
+
+2021-08-11 Alan Modra <amodra@gmail.com>
+
+ PR28198, Support # as linker script comment marker
+ PR 28198
+ * ldlex.l: Combine rules for handling newline, whitespace and
+ comments. Extend # comment handling to all states.
+
+2021-08-11 Alan Modra <amodra@gmail.com>
+
+ ldgram.y tidies
+ I've been tripped up before thinking the "end" rule was the "END"
+ token. Let's use a better name. The formatting changes are for
+ consistency within rules, and making it a little easier to visually
+ separate tokens from mid-rule actions.
+
+ * ldgram.y (separator): Rename from "end". Update uses.
+ (statement): Formatting. Move ';' match to beginning.
+ (paren_script_name): Formatting. Simplify.
+ (must_be_exp, section): Formatting.
+
+2021-08-11 Alan Modra <amodra@gmail.com>
+
+ Mention whitespace in script expressions
+ Inside an output section statement, ld's parser can't tell whether a
+ line
+ .+=4;
+ is an assignment to dot or a file named ".+=4".
+
+ * ld.texi (expressions): Mention need for whitespace.
+
+2021-08-11 Matt Jacobson <mhjacobson@me.com>
+
+ Add a -mno-dollar-line-separator command line option to the AVR assembler.
+ Some frontends, like the gcc Objective-C frontend, emit symbols with $
+ characters in them. The AVR target code in gas treats $ as a line separator,
+ so the code doesn?t assemble correctly.
+
+ Provide a machine-specific option to disable treating $ as a line separator.
+
+ * config/tc-avr.c (enum options): Add option flag.
+ (struct option): Add option -mno-dollar-line-separator.
+ (md_parse_option): Adjust treatment of $ when option is present.
+ * config/tc-avr.h: Use avr_line_separator_chars.
+
+2021-08-11 Nick Clifton <nickc@redhat.com>
+
+ Fix typo in previous delta
+
+2021-08-11 Jan Beulich <jbeulich@suse.com>
+
+ gas: fold IEEE encoding of -Inf with that of +Inf
+ The respective results differ only by the sign bits - there's no need to
+ have basically identical (partially even arch-specific) logic twice.
+ Simply set the sign bit at the end of encoding the various formats.
+
+2021-08-11 Jan Beulich <jbeulich@suse.com>
+
+ gas: support NaN flavors
+ Like for infinity, there isn't just a single NaN. The sign bit may be
+ of interest and, going beyond infinity, whether the value is quiet or
+ signalling may be even more relevant to be able to encode.
+
+ Note that an anomaly with x86'es double extended precision NaN values
+ gets taken care of at the same time: For all other formats a positive
+ value with all mantissa bits set was used, while here a negative value
+ with all non-significant mantissa bits clear was chose for an unknown
+ reason.
+
+ For m68k, since I don't know their X_PRECISION floating point value
+ layout, a warning gets issued if any of the new flavors was attempted
+ to be encoded that way. However likely it may be that, given that the
+ code lives in a source file supposedly implementing IEEE-compliant
+ formats, the bit patterns of the individual words match x86'es, I didn't
+ want to guess so. And my very, very old paper doc doesn't even mention
+ floating point formats other than single and double.
+
+2021-08-11 Jan Beulich <jbeulich@suse.com>
+
+ Arm64: leave .bfloat16 processing to common code
+ With x86 support having been implemented by extending atof-ieee.c, avoid
+ unnecessary code duplication in md_atof(). This will then also allow to
+ take advantage of adjustments made there without needing to mirror them
+ here.
+
+ Arm32: leave more .bfloat16 processing to common code
+ With x86 support having been implemented by extending atof-ieee.c, avoid
+ unnecessary code duplication in md_atof(). This will then also allow to
+ take advantage of adjustments made there without needing to mirror them
+ here.
+
+ gas: make 2nd argument of .dcb.* consistently optional
+ Unlike the forms consuming/producing integer data, the floating point
+ ones so far required the 2nd argument to be present, contrary to
+ documentation. To avoid code duplication, split float_length() out of
+ hex_float() (taking the opportunity to adjust error message wording).
+
+2021-08-11 Jan Beulich <jbeulich@suse.com>
+
+ x86: introduce .bfloat16 directive
+ This is to be able to generate data acted upon by AVX512-BF16 and
+ AMX-BF16 insns. While not part of the IEEE standard, the format is
+ sufficiently standardized to warrant handling in config/atof-ieee.c.
+ Arm, where custom handling was implemented, may want to leverage this as
+ well. To be able to also use the hex forms supported for other floating
+ point formats, a small addition to the generic hex_float() is needed.
+
+ Extend existing x86 testcases.
+
+2021-08-11 Jan Beulich <jbeulich@suse.com>
+
+ x86: introduce .hfloat directive
+ This is to be able to generate data passed to {,V}CVTPH2PS and acted
+ upon by AVX512-FP16 insns. To be able to also use the hex forms
+ supported for other floating point formats, a small addition to the
+ generic hex_float() is needed.
+
+ Extend existing x86 testcases.
+
+2021-08-11 Jan Beulich <jbeulich@suse.com>
+
+ x86/ELF: fix .tfloat output with hex input
+ The ELF psABI-s are quite clear here: On 32-bit the data type is 12
+ bytes long (with 2 bytes of trailing padding), while on 64-bit it is 16
+ bytes long (with 6 bytes of padding). Make hex_float() capable of
+ handling such padding.
+
+ Note that this brings the emitted data size of .dc.x / .dcb.x in line
+ also for non-ELF targets; so far they were different depending on input
+ format (dec vs hex).
+
+ Extend the existing x86 testcases.
+
+2021-08-11 Jan Beulich <jbeulich@suse.com>
+
+ x86/ELF: fix .ds.x output
+ The ELF psABI-s are quite clear here: On 32-bit the underlying data type
+ is 12 bytes long (with 2 bytes of trailing padding), while on 64-bit it
+ is 16 bytes long (with 6 bytes of padding). Make s_space() capable of
+ handling 'x' (and 'p') type floating point being other than 12 bytes
+ wide (also adjusting documentation). This requires duplicating the
+ definition of X_PRECISION in the target speciifc header; the compiler
+ would complain if this was out of sync with config/atof-ieee.c.
+
+ Note that for now padding space doesn't get separated from actual
+ storage, which means that things will work correctly only for little-
+ endian cases, and which also means that by specifying large enough
+ numbers padding space can be set to non-zero. Since the logic is needed
+ for a single little-endian architecture only for now, I'm hoping that
+ this might be acceptable for the time being; otherwise the change will
+ become more intrusive.
+
+ Note also that this brings the emitted data size of .ds.x vs .tfloat in
+ line for non-ELF targets as well; the issue will be even more obvious
+ when further taking into account a subsequent patch fixing .dc.x/.dcb.x
+ (where output sizes currently differ depending on input format).
+
+ Extend existing x86 testcases.
+
+2021-08-11 Jan Beulich <jbeulich@suse.com>
+
+ x86/ELF: fix .tfloat output
+ The ELF psABI-s are quite clear here: On 32-bit the data type is 12
+ bytes long (with 2 bytes of trailing padding), while on 64-bit it is 16
+ bytes long (with 6 bytes of padding). Make ieee_md_atof() capable of
+ handling such padding, and specify the needed padding for x86 (leaving
+ non-ELF targets alone for now). Split the existing x86 testcase.
+
+ x86: have non-PE/COFF BEOS be recognized as ELF
+ BEOS, unless explicitly requesting *-*-beospe* targets, uses standard
+ ELF. None of the newly enabled tests in the testsuite fail for me.
+
+2021-08-11 Alan Modra <amodra@gmail.com>
+
+ PR28163, Segment fault in function rl78_special_reloc
+ Relocation offset checks were completely missing in the rl78 backend,
+ allowing a relocation to write over memory anywhere. This was true
+ for rl78_special_reloc, a function primarily used when applying debug
+ relocations, and in rl78_elf_relocate_section used by the linker.
+
+ This patch fixes those problems by correcting inaccuracies in the
+ relocation howtos, then uses those howtos to sanity check relocation
+ offsets before applying relocations. In addition, the patch
+ implements overflow checking using the howto information rather than
+ the ad-hoc scheme implemented in relocate_section. I implemented the
+ overflow checking in rl78_special_reloc too.
+
+ * elf32-rl78.c (RL78REL, RL78_OP_REL): Add mask parameter.
+ (rl78_elf_howto_table): Set destination masks. Correct size and
+ bitsize of DIR32_REV. Correct complain_on_overflow for many relocs
+ as per tests in relocate_section. Add RH_SFR. Correct bitsize
+ for RH_SADDR. Set size to 3 and bitsize to 0 for all OP relocs.
+ (check_overflow): New function.
+ (rl78_special_reloc): Check that reloc address is within section.
+ Apply relocations using reloc howto. Check for overflow.
+ (RANGE): Delete.
+ (rl78_elf_relocate_section): Sanity check r_offset. Perform
+ overflow checking using reloc howto.
+
+2021-08-11 GDB Administrator <gdbadmin@sourceware.org>
+
+ Automatic date update in version.in
+
+2021-08-10 Tom Tromey <tom@tromey.com>
+
+ Ignore .debug_types when reading .debug_aranges
+ I noticed that the fission-reread.exp test case can cause a complaint
+ when run with --target_board=cc-with-debug-names:
+
+ warning: Section .debug_aranges in [...]/fission-reread has duplicate debug_info_offset 0x0, ignoring .debug_aranges.
+
+ The bug here is that this executable has both .debug_info and
+ .debug_types, and both have a CU at offset 0x0. This triggers the
+ duplicate warning.
+
+ Because .debug_types doesn't provide any address ranges, these CUs can
+ be ignored. That is, this bug turns out to be another regression from
+ the info/types merger patch.
+
+ This patch fixes the problem by having this loop igore type units.
+ fission-reread.exp is updated to test for the bug.
+
+2021-08-10 Tom Tromey <tom@tromey.com>
+
+ Generalize addrmap dumping
+ While debugging another patch series, I wanted to dump an addrmap. I
+ came up with this patch, which generalizes the addrmap-dumping code
+ from psymtab.c and moves it to addrmap.c. psymtab.c is changed to use
+ the new code.
+
+2021-08-10 Simon Marchi <simon.marchi@polymtl.ca>
+
+ gdb: iterate only on vfork parent threads in handle_vfork_child_exec_or_exit
+ I spotted what I think is a buglet in proceed_after_vfork_done. After a
+ vfork child exits or execs, we resume all the threads of the parent. To
+ do so, we iterate on all threads using iterate_over_threads with the
+ proceed_after_vfork_done callback. Each thread is resumed if the
+ following condition is true:
+
+ if (thread->ptid.pid () == pid
+ && thread->state == THREAD_RUNNING
+ && !thread->executing
+ && !thread->stop_requested
+ && thread->stop_signal () == GDB_SIGNAL_0)
+
+ where `pid` is the pid of the vfork parent. This is not multi-target
+ aware: since it only filters on pid, if there is an inferior with the
+ same pid in another target, we could end up resuming a thread of that
+ other inferior. The chances of the stars aligning for this to happen
+ are tiny, but still.
+
+ Fix that by iterating only on the vfork parent's threads, instead of on
+ all threads. This is more efficient, as we iterate on just the required
+ threads (inferiors have their own thread list), and we can drop the pid
+ check. The resulting code is also more straightforward in my opinion,
+ so it's a win-win.
+
+ Change-Id: I14647da72e2bf65592e82fbe6efb77a413a4be3a
+
+2021-08-10 Nick Clifton <nickc@redhat.com>
+
+ Updated Serbian and Russian translations for various sub-directories
+
+2021-08-10 George Barrett <bob@bob131.so>
+
+ guile: fix smob exports
+ Before Guile v2.1 [1], calls to `scm_make_smob_type' implicitly added
+ the created class to the exports list of (oop goops); v2.1+ does not
+ implicitly create bindings in any modules. This means that the GDB
+ manual subsection documenting exported types is not quite right when GDB
+ is linked against Guile <v2.1 (types are exported from (oop goops))
+ instead of (gdb)) and incorrect when linked against Guile v2.1+ (types
+ are not bound to any variables at all!).
+
+ There is a range of cases in which it's necessary or convenient to be
+ able to refer to a GDB smob type, for instance:
+
+ - Pattern matching based on the type of a value.
+ - Defining GOOPS methods handling values from GDB (GOOPS methods
+ typically use dynamic dispatch based on the types of the arguments).
+ - Type-checking assertions when applying some defensive programming on
+ an interface.
+ - Generally any other situation one might encounter in a dynamically
+ typed language that might need some introspection.
+
+ If you're more familiar with Python, it would be quite similar to being
+ unable to refer to the classes exported from the GDB module (which is to
+ say: not crippling for the most part, but makes certain tasks more
+ difficult than necessary).
+
+ This commit makes a small change to GDB's smob registration machinery
+ to make sure registered smobs get exported from the current
+ module. This will likely cause warnings to the user about conflicting
+ exports if they load both (gdb) and (oop goops) from a GDB linked
+ against Guile v2.0, but it shouldn't impact functionality (and seemed
+ preferable to trying to un-export bindings from (oop goops) if v2.0
+ was detected).
+
+ [1]: This changed with Guile commit
+ 28d0871b553a3959a6c59e2e4caec1c1509f8595
+
+ gdb/ChangeLog:
+
+ 2021-06-07 George Barrett <bob@bob131.so>
+
+ * guile/scm-gsmob.c (gdbscm_make_smob_type): Export registered
+ smob type from the current module.
+
+ gdb/testsuite/ChangeLog:
+
+ 2021-06-07 George Barrett <bob@bob131.so>
+
+ * gdb.guile/scm-gsmob.exp (test exports): Add tests to make
+ sure the smob types currently listed in the GDB manual get
+ exported from the (gdb) module.
+
+ Change-Id: I7dcd791276b48dfc9edb64fc71170bbb42a6f6e7
+
+2021-08-10 GDB Administrator <gdbadmin@sourceware.org>
+
+ Automatic date update in version.in
+
+2021-08-09 Nick Clifton <nickc@redhat.com>
+
+ GAS: DWARF-5: Ensure that the 0'th entry in the directory table contains the current working directory.
+ * dwarf2dbg.c (get_directory_table_entry): Ensure that dir[0]
+ contains current working directory.
+ (out_dir_and_file_list): Likewise.
+ * testsuite/gas/elf/dwarf-5-dir0.s: New test source file.
+ * testsuite/gas/elf/dwarf-5-dir0.d: New test driver.
+ * testsuite/gas/elf/elf.exp: Run the new test.
+ * testsuite/gas/elf/dwarf-5-file0.d: Adjust expected output.
+ * testsuite/gas/i386/dwarf5-line-1.d: Likewise.
+ * testsuite/gas/i386/dwarf5-line-2.d: Likewise.
+
+2021-08-09 GDB Administrator <gdbadmin@sourceware.org>
+
+ Automatic date update in version.in
+
+2021-08-08 Tom Tromey <tom@tromey.com>
+
+ Include objfiles.h in a few .c files
+ I found a few .c files that rely on objfiles.h, but that only include
+ it indirectly, via dwarf2/read.h -> psympriv.h. If that include is
+ removed (something my new DWARF indexer series does), then the build
+ will break.
+
+ It seemed harmless and correct to add these includes now, making the
+ eventual series a little smaller.
+
+2021-08-08 GDB Administrator <gdbadmin@sourceware.org>
+
+ Automatic date update in version.in
+
+2021-08-07 Alan Modra <amodra@gmail.com>
+
+ PR28186, SEGV elf.c:7991:30 in _bfd_elf_fixup_group_sections
+ PR 28186
+ * elf.c (_bfd_elf_fixup_group_sections): Don't segfault on
+ objcopy/strip with NULL output_section.
+
+2021-08-07 Alan Modra <amodra@gmail.com>
+
+ PR28176, rl78 complex reloc divide by zero
+ This is a bit more than just preventing the divide by zero. Most of
+ the patch is tidying up error reporting, so that for example, linking
+ an object file with a reloc stack underflow produces a linker error
+ rather than just displaying a message that might be ignored.
+
+ PR 28176
+ * elf32-rl78.c (RL78_STACK_PUSH, RL78_STACK_POP): Delete.
+ (rl78_stack_push, rl78_stack_pop): New inline functions.
+ (rl78_compute_complex_reloc): Add status and error message params.
+ Use new inline stack handling functions. Report stack overflow
+ or underflow, and divide by zero.
+ (rl78_special_reloc): Return status and error message from
+ rl78_compute_complex_reloc.
+ (rl78_elf_relocate_section): Similarly. Modernise reloc error
+ reporting. Delete unused bfd_reloc_other case. Don't assume
+ DIR24S_PCREL overflow is due to undefined function.
+ (rl78_offset_for_reloc): Adjust to suit rl78_compute_complex_reloc.
+
+2021-08-07 GDB Administrator <gdbadmin@sourceware.org>
+
+ Automatic date update in version.in
+
+2021-08-06 Tom de Vries <tdevries@suse.de>
+
+ [gdb/symtab] Recognize .gdb_index symbol table with empty entries as empty
+ When reading a .gdb_index that contains a non-empty symbol table with only
+ empty entries, gdb doesn't recognize it as empty.
+
+ Fix this by recognizing that the constant pool is empty, and then setting the
+ symbol table to empty.
+
+ Tested on x86_64-linux.
+
+ gdb/ChangeLog:
+
+ 2021-08-01 Tom de Vries <tdevries@suse.de>
+
+ PR symtab/28159
+ * dwarf2/read.c (read_gdb_index_from_buffer): Handle symbol table
+ filled with empty entries.
+
+ gdb/testsuite/ChangeLog:
+
+ 2021-08-01 Tom de Vries <tdevries@suse.de>
+
+ PR symtab/28159
+ * gdb.dwarf2/dw2-zero-range.exp: Remove kfail.
+
+2021-08-06 Tom Tromey <tromey@adacore.com>
+
+ Unconditionally define _initialize_addrmap
+ The way that init.c is generated does not allow for an initialization
+ function to be conditionally defined -- doing so will result in a link
+ error.
+
+ This patch fixes a build problem that arises from such a conditional
+ definition. It can be reproduce with --disable-unit-tests.
+
+2021-08-06 Tom de Vries <tdevries@suse.de>
+
+ [gdb/symtab] Fix zero address complaint for shlib
+ In PR28004 the following warning / Internal error is reported:
+ ...
+ $ gdb -q -batch \
+ -iex "set sysroot $(pwd -P)/repro" \
+ ./repro/gdb \
+ ./repro/core \
+ -ex bt
+ ...
+ Program terminated with signal SIGABRT, Aborted.
+ #0 0x00007ff8fe8e5d22 in raise () from repro/usr/lib/libc.so.6
+ [Current thread is 1 (LWP 1762498)]
+ #1 0x00007ff8fe8cf862 in abort () from repro/usr/lib/libc.so.6
+ warning: (Internal error: pc 0x7ff8feb2c21d in read in psymtab, \
+ but not in symtab.)
+ warning: (Internal error: pc 0x7ff8feb2c218 in read in psymtab, \
+ but not in symtab.)
+ ...
+ #2 0x00007ff8feb2c21e in __gnu_debug::_Error_formatter::_M_error() const \
+ [clone .cold] (warning: (Internal error: pc 0x7ff8feb2c21d in read in \
+ psymtab, but not in symtab.)
+
+ ) from repro/usr/lib/libstdc++.so.6
+ ...
+
+ The warning is about the following:
+ - in find_pc_sect_compunit_symtab we try to find the address
+ (0x7ff8feb2c218 / 0x7ff8feb2c21d) in the symtabs.
+ - that fails, so we try again in the partial symtabs.
+ - we find a matching partial symtab
+ - however, the partial symtab has a full symtab, so
+ we should have found a matching symtab in the first step.
+
+ The addresses are:
+ ...
+ (gdb) info sym 0x7ff8feb2c218
+ __gnu_debug::_Error_formatter::_M_error() const [clone .cold] in \
+ section .text of repro/usr/lib/libstdc++.so.6
+ (gdb) info sym 0x7ff8feb2c21d
+ __gnu_debug::_Error_formatter::_M_error() const [clone .cold] + 5 in \
+ section .text of repro/usr/lib/libstdc++.so.6
+ ...
+ which correspond to unrelocated addresses 0x9c218 and 0x9c21d:
+ ...
+ $ nm -C repro/usr/lib/libstdc++.so.6.0.29 | grep 000000000009c218
+ 000000000009c218 t __gnu_debug::_Error_formatter::_M_error() const \
+ [clone .cold]
+ ...
+ which belong to function __gnu_debug::_Error_formatter::_M_error() in
+ /build/gcc/src/gcc/libstdc++-v3/src/c++11/debug.cc.
+
+ The partial symtab that is found for the addresses is instead the one for
+ /build/gcc/src/gcc/libstdc++-v3/src/c++98/bitmap_allocator.cc, which is
+ incorrect.
+
+ This happens as follows.
+
+ The bitmap_allocator.cc CU has DW_AT_ranges at .debug_rnglist offset 0x4b50:
+ ...
+ 00004b50 0000000000000000 0000000000000056
+ 00004b5a 00000000000a4790 00000000000a479c
+ 00004b64 00000000000a47a0 00000000000a47ac
+ ...
+
+ When reading the first range 0x0..0x56, it doesn't trigger the "start address
+ of zero" complaint here:
+ ...
+ /* A not-uncommon case of bad debug info.
+ Don't pollute the addrmap with bad data. */
+ if (range_beginning + baseaddr == 0
+ && !per_objfile->per_bfd->has_section_at_zero)
+ {
+ complaint (_(".debug_rnglists entry has start address of zero"
+ " [in module %s]"), objfile_name (objfile));
+ continue;
+ }
+ ...
+ because baseaddr != 0, which seems incorrect given that when loading the
+ shared library individually in gdb (and consequently baseaddr == 0), we do see
+ the complaint.
+
+ Consequently, we run into this case in dwarf2_get_pc_bounds:
+ ...
+ if (low == 0 && !per_objfile->per_bfd->has_section_at_zero)
+ return PC_BOUNDS_INVALID;
+ ...
+ which then results in this code in process_psymtab_comp_unit_reader being
+ called with cu_bounds_kind == PC_BOUNDS_INVALID, which sets the set_addrmap
+ argument to 1:
+ ...
+ scan_partial_symbols (first_die, &lowpc, &highpc,
+ cu_bounds_kind <= PC_BOUNDS_INVALID, cu);
+ ...
+ and consequently, the CU addrmap gets build using address info from the
+ functions.
+
+ During that process, addrmap_set_empty is called with a range that includes
+ 0x9c218 and 0x9c21d:
+ ...
+ (gdb) p /x start
+ $7 = 0x9989c
+ (gdb) p /x end_inclusive
+ $8 = 0xb200d
+ ...
+ but it's called for a function at DIE 0x54153 with DW_AT_ranges at 0x40ae:
+ ...
+ 000040ae 00000000000b1ee0 00000000000b200e
+ 000040b9 000000000009989c 00000000000998c4
+ 000040c3 <End of list>
+ ...
+ and neither range includes 0x9c218 and 0x9c21d.
+
+ This is caused by this code in partial_die_info::read:
+ ...
+ if (dwarf2_ranges_read (ranges_offset, &lowpc, &highpc, cu,
+ nullptr, tag))
+ has_pc_info = 1;
+ ...
+ which pretends that the function is located at addresses 0x9989c..0xb200d,
+ which is indeed not the case.
+
+ This patch fixes the first problem encountered: fix the "start address of
+ zero" complaint warning by removing the baseaddr part from the condition.
+ Same for dwarf2_ranges_process.
+
+ The effect is that:
+ - the complaint is triggered, and
+ - the warning / Internal error is no longer triggered.
+
+ This does not fix the observed problem in partial_die_info::read, which is
+ filed as PR28200.
+
+ Tested on x86_64-linux.
+
+ Co-Authored-By: Simon Marchi <simon.marchi@polymtl.ca>
+
+ gdb/ChangeLog:
+
+ 2021-07-29 Simon Marchi <simon.marchi@polymtl.ca>
+ Tom de Vries <tdevries@suse.de>
+
+ PR symtab/28004
+ * gdb/dwarf2/read.c (dwarf2_rnglists_process, dwarf2_ranges_process):
+ Fix zero address complaint.
+ * gdb/testsuite/gdb.dwarf2/dw2-zero-range-shlib.c: New test.
+ * gdb/testsuite/gdb.dwarf2/dw2-zero-range.c: New test.
+ * gdb/testsuite/gdb.dwarf2/dw2-zero-range.exp: New file.
+
+2021-08-06 Alan Modra <amodra@gmail.com>
+
+ Re: Add tests for Intel AVX512_FP16 instructions
+ * testsuite/gas/i386/x86-64-avx512_fp16_pseudo_ops.d: Pass with
+ mingw section padding.
+
+2021-08-06 Alan Modra <amodra@gmail.com>
+
+ chew ubsan warning
+ It matters not at all if pc is incremented from its initial NULL
+ value, but avoid this silly runtime ubsan error.
+
+ * doc/chew.c (perform): Avoid incrementing NULL pc.
+
+2021-08-06 Alan Modra <amodra@gmail.com>
+
+ bfd_reloc_offset_in_range overflow
+ This patch is more about the style of bounds checking we ought to use,
+ rather than a real problem. An overflow of "octet + reloc_size" can
+ only happen with huge sections which would certainly cause out of
+ memory errors.
+
+ * reloc.c (bfd_reloc_offset_in_range): Avoid possible overflow.
+
+2021-08-06 Alan Modra <amodra@gmail.com>
+
+ PR28175, Segment fault in coff-tic30.c reloc_processing
+ The obj_convert table shouldn't be accessed without first checking the
+ index against the table size.
+
+ PR 28175
+ * coff-tic30.c (reloc_processing): Sanity check reloc symbol index.
+ * coff-z80.c (reloc_processing): Likewise.
+ * coff-z8k.c (reloc_processing): Likewise.
+
+2021-08-06 Alan Modra <amodra@gmail.com>
+
+ PR28173, nds32_elf_howto_table index out of bounds
+ Indexing the howto table was seriously broken by a missing entry, and
+ use of assertions about user input rather than testing the input.
+
+ PR 28173
+ * elf32-nds32.c (nds32_elf_howto_table): Add missing empty howto.
+ (bfd_elf32_bfd_reloc_type_table_lookup): Replace assertions with
+ range checks. Return NULL if unsupported reloc type. Remove
+ dead code. Take an unsigned int param.
+ (nds32_info_to_howto_rel): Test for NULL howto or howto name
+ return from lookup. Remove assertion.
+ (nds32_info_to_howto): Remove unnecessary ATTRIBUTE_UNUSED.
+ Test for NULL howto or howto name return from lookup.
+
+2021-08-06 Alan Modra <amodra@gmail.com>
+
+ PR28172, bfin_pcrel24_reloc heap-buffer-overflow
+ bfin pcrel24 relocs are weird, they apply to the reloc address minus
+ two. That means reloc addresses of 0 and 1 are invalid. Check that,
+ and fix other reloc range checking.
+
+ PR 28172
+ * elf32-bfin.c (bfin_pcrel24_reloc): Correct reloc range check.
+ (bfin_imm16_reloc, bfin_byte4_reloc, bfin_bfd_reloc): Likewise.
+ (bfin_final_link_relocate): Likewise.
+
+2021-08-06 GDB Administrator <gdbadmin@sourceware.org>
+
+ Automatic date update in version.in
+
+2021-08-05 Will Schmidt <will_schmidt@vnet.ibm.com>
+
+ [PATCH] GDB Testsuite, update compile-cplus.exp
+ [PATCH] GDB Testsuite, update compile-cplus.exp
+
+ Update the gdb.compile/compile-cplus.exp test to
+ handle errors generated when passing bad arguments
+ into the gdb-compile command.
+ This matches changes made to gdb.compile/compile.exp
+ in the past as part of
+ "Migrate rest of compile commands to new options framework"
+ e6ed716cd5514c08b9d7c469d185b1aa177dbc22
+
+2021-08-05 Will Schmidt <will_schmidt@vnet.ibm.com>
+
+ [gdb] Handle .TOC. sections during gdb-compile for rs6000 target.
+ [gdb] Handle .TOC. sections during gdb-compile for rs6000 target.
+
+ When we encounter a .TOC. symbol in the object we are loading,
+ we need to associate this with the .toc section in order to
+ properly resolve other symbols in the object. IF a .toc section
+ is not found, iterate the sections until we find one with the
+ SEC_ALLOC flag. If that also fails, fall back to using
+ the *ABS* section, pointed to by bfd_abs_section_ptr.
+
+2021-08-05 Simon Marchi <simon.marchi@polymtl.ca>
+
+ gdb/testsuite: gdb.base/attach.exp: expose bug when testing with native-extended-gdbserver
+ In gdb.base/attach.exp, proc do_attach_failure_tests, we attach to a
+ process. When then try to attach to the same process in another
+ inferior, expecting it to fail. We then come back to the first inferior
+ and try to kill it, to clean up the test. When using the
+ native-extended-gdbserver board, this "kill" test passes, even though it
+ didn't actually work:
+
+ add-inferior
+ [New inferior 2]
+ Added inferior 2 on connection 1 (extended-remote localhost:2347)
+ (gdb) PASS: gdb.base/attach.exp: do_attach_failure_tests: add empty inferior 2
+ inferior 2
+ [Switching to inferior 2 [<null>] (<noexec>)]
+ (gdb) PASS: gdb.base/attach.exp: do_attach_failure_tests: switch to inferior 2
+ attach 817032
+ Attaching to process 817032
+ Attaching to process 817032 failed
+ (gdb) PASS: gdb.base/attach.exp: do_attach_failure_tests: fail to attach again
+ inferior 1
+ [Switching to inferior 1 [process 817032] (/home/simark/build/binutils-gdb/gdb/testsuite/outputs/gdb.base/attach/attach)]
+ [Switching to thread 1.1 (Thread 817032.817032)]
+ #0 main () at /home/simark/src/binutils-gdb/gdb/testsuite/gdb.base/attach.c:19
+ 19 while (! should_exit)
+ (gdb) PASS: gdb.base/attach.exp: do_attach_failure_tests: switch to inferior 1
+ kill
+ Kill the program being debugged? (y or n) y
+ Remote connection closed <==== That's unexpected
+ (gdb) PASS: gdb.base/attach.exp: do_attach_failure_tests: exit after attach failures
+
+ When the second attach fails, gdbserver seems to break the connection
+ (it hangs up on the existing remote target) and start listening again
+ for incoming connections. This is documented in PR 19558 [1].
+
+ Make the expected output regexp for the kill command tighter (it
+ currently accepts anything). Use "set confirm off" so we don't have to
+ deal with the confirmation. And to be really sure the extended-remote
+ target still works, try to run the inferior again after killing. The
+ now tests are kfail'ed when the target is gdbserver.
+
+ [1] https://sourceware.org/bugzilla/show_bug.cgi?id=19558
+
+ gdb/testsuite/ChangeLog:
+
+ * gdb.base/attach.exp (do_attach_failure_tests): Make kill
+ regexp tighter, run inferior after killing it. Kfail when
+ target is gdbserver.
+
+ Change-Id: I99c5cd3968ce2ec962ace35b016f842a243b7a0d
+
+2021-08-05 Simon Marchi <simon.marchi@polymtl.ca>
+
+ gdb/testsuite: gdb.base/attach.exp: fix support check in test_command_line_attach_run
+ When running this test with the native-extended-gdbserver, we get:
+
+ main () at /home/simark/src/binutils-gdb/gdb/testsuite/gdb.base/attach.c:19
+ 19 while (! should_exit)
+ The program being debugged has been started already.
+ Start it from the beginning? (y or n) PASS: gdb.base/attach.exp: cmdline attach run: run to prompt
+ y
+ Don't know how to run. Try "help target".
+ (gdb) FAIL: gdb.base/attach.exp: cmdline attach run: run to main
+
+ This test tests using both "-p <pid>" and "-ex start" on the command line,
+ making sure that we first attach and then run.
+
+ Normally, after that "y", we should see the program running again.
+ However, a particuliarity of the native-extended-gdbserver is that it
+ uses "set auto-connect-native-target off" on the command line. The full
+ GDB command line is:
+
+ ./gdb -nw -nx -data-directory /home/simark/build/binutils-gdb/gdb/testsuite/../data-directory \
+ -iex set height 0 -iex set width 0 -ex set auto-connect-native-target off \
+ -ex set sysroot -quiet -iex set height 0 -iex set width 0 --pid=536609 -ex start
+
+ The attach succeeds. I guess it is done before "set
+ auto-connect-native-target off", or it somehow bypasses it. When the
+ "start" is executed, the native target is unpushed, while killing the
+ existing process, but not re-pushed, due to "set
+ auto-connect-native-target off". So we get that "Don't know how to run"
+ message.
+
+ Really, I think it's a case of the test doing things incompatible with
+ the board, I think it should just be skipped. And as we can see with
+ the current code, there were some attempts at doing this, just using the
+ wrong checks:
+
+ - isnative: this is a dejagnu proc which checks if the target board has
+ the same triplet as the build machine. In the case of
+ native-extended-gdbserver, it does.
+ - is_remote target: this checks whether the target board is remote, as
+ in executing on a different machin. native-extended-gdbserver is not
+ remote.
+
+ Since the --pid option specifically attaches to a process using the
+ native target, change the test to use gdb_is_target_native instead.
+
+ gdb/testsuite/ChangeLog:
+
+ * gdb.base/attach.exp (test_command_line_attach_run): Use
+ gdb_is_target_native to check if test is supported.
+
+ Change-Id: I762e127f39623889999dc9ed2185540a0951bfb0
+
+2021-08-05 Simon Marchi <simon.marchi@polymtl.ca>
+
+ gdb: target_waitstatus_to_string: print extra info for FORKED, VFORKED, EXECD
+ Print the extra information contained in target_waitstatus for these
+ events. For TARGET_WAITKIND_{FORKED,VFORKED}, the extra information is
+ contained in related_pid, and is the ptid of the new process. For
+ TARGET_WAITKIND_EXECD, it,s the exec'd path name in execd_pathname.
+ Print it using the same format used for TARGET_WAITKIND_STOPPED and
+ others.
+
+ Here are sample outputs for all three events:
+
+ [infrun] print_target_wait_results: target_wait (-1.0.0 [process -1], status) =
+ [infrun] print_target_wait_results: 726890.726890.0 [process 726890],
+ [infrun] print_target_wait_results: status->kind = vforked, related_pid = 726894.726894.0
+
+ [infrun] print_target_wait_results: target_wait (-1.0.0 [process -1], status) =
+ [infrun] print_target_wait_results: 727045.727045.0 [process 727045],
+ [infrun] print_target_wait_results: status->kind = forked, related_pid = 727049.727049.0
+
+ [infrun] print_target_wait_results: target_wait (-1.0.0 [process -1], status) =
+ [infrun] print_target_wait_results: 727119.727119.0 [process 727119],
+ [infrun] print_target_wait_results: status->kind = execd, execd_pathname = /usr/bin/ls
+
+ Change-Id: I4416a74e3bf792a625a68bf26c51689e170f2184
+
+2021-08-05 Simon Marchi <simon.marchi@polymtl.ca>
+
+ gdb: use ptid_t::to_string in print_target_wait_results
+ The ptid_t::to_string method was introduced recently, to format a ptid_t
+ for debug purposes. It formats the ptid exactly as is done in
+ print_target_wait_results, so make print_target_wait_results use it.
+
+ Change-Id: I0a81c8040d3e1858fb304cb28366b34d94eefe4d
+
+2021-08-05 Zoran Zaric <Zoran.Zaric@amd.com>
+
+ Add as_lval argument to expression evaluator
+ There are cases where the result of the expression evaluation is
+ expected to be in a form of a value and not location description.
+
+ One place that has this requirement is dwarf_entry_parameter_to_value
+ function, but more are expected in the future. Until now, this
+ requirement was fulfilled by extending the evaluated expression with
+ a DW_OP_stack_value operation at the end.
+
+ New implementation, introduces a new evaluation argument instead.
+
+ * dwarf2/expr.c (dwarf_expr_context::fetch_result): Add as_lval
+ argument.
+ (dwarf_expr_context::eval_exp): Add as_lval argument.
+ * dwarf2/expr.h (struct dwarf_expr_context): Add as_lval
+ argument to fetch_result and eval_exp methods.
+ * dwarf2/frame.c (execute_stack_op): Add as_lval argument.
+ * dwarf2/loc.c (dwarf_entry_parameter_to_value): Remove
+ DWARF expression extension.
+ (dwarf2_evaluate_loc_desc_full): Add as_lval argument support.
+ (dwarf2_evaluate_loc_desc): Add as_lval argument support.
+ (dwarf2_locexpr_baton_eval): Add as_lval argument support.
+
+2021-08-05 Zoran Zaric <zoran.zaric@amd.com>
+
+ Simplify dwarf_expr_context class interface
+ Idea of this patch is to get a clean and simple public interface for
+ the dwarf_expr_context class, looking like:
+
+ - constructor,
+ - destructor,
+ - push_address method and
+ - evaluate method.
+
+ Where constructor should only ever require a target architecture
+ information. This information is held in per object file
+ (dwarf2_per_objfile) structure, so it makes sense to keep that
+ structure as a constructor argument. It also makes sense to get the
+ address size from that structure, but unfortunately that interface
+ doesn't exist at the moment, so the dwarf_expr_context class user
+ needs to provide that information.
+
+ The push_address method is used to push a CORE_ADDR as a value on
+ top of the DWARF stack before the evaluation. This method can be
+ later changed to push any struct value object on the stack.
+
+ The evaluate method is the method that evaluates a DWARF expression
+ and provides the evaluation result, in a form of a single struct
+ value object that describes a location. To do this, the method requires
+ a context of the evaluation, as well as expected result type
+ information. If the type information is not provided, the DWARF generic
+ type will be used instead.
+
+ To avoid storing the gdbarch information in the evaluator object, that
+ information is now always acquired from the per_objfile object.
+
+ All data members are now private and only visible to the evaluator
+ class, so a m_ prefix was added to all of their names to reflect that.
+ To make this distinction clear, they are also accessed through objects
+ this pointer, wherever that was not the case before.
+
+ gdb/ChangeLog:
+
+ * dwarf2/expr.c (dwarf_expr_context::dwarf_expr_context): Add
+ address size argument.
+ (dwarf_expr_context::read_mem): Change to use property_addr_info
+ structure.
+ (dwarf_expr_context::evaluate): New function.
+ (dwarf_expr_context::execute_stack_op): Change to use
+ property_addr_info structure.
+ * dwarf2/expr.h (struct dwarf_expr_context): New evaluate
+ declaration. Change eval and fetch_result method to private.
+ (dwarf_expr_context::gdbarch): Remove member.
+ (dwarf_expr_context::stack): Make private and add m_ prefix.
+ (dwarf_expr_context::addr_size): Make private and add
+ m_ prefix.
+ (dwarf_expr_context::recursion_depth): Make private and add
+ m_ prefix.
+ (dwarf_expr_context::max_recursion_depth): Make private and
+ add m_ prefix.
+ (dwarf_expr_context::len): Make private and add m_ prefix.
+ (dwarf_expr_context::data): Make private and add m_ prefix.
+ (dwarf_expr_context::initialized): Make private and add
+ m_ prefix.
+ (dwarf_expr_context::pieces): Make private and add m_ prefix.
+ (dwarf_expr_context::per_objfile): Make private and add
+ m_ prefix.
+ (dwarf_expr_context::frame): Make private and add m_ prefix.
+ (dwarf_expr_context::per_cu): Make private and add m_ prefix.
+ (dwarf_expr_context::addr_info): Make private and add
+ m_ prefix.
+ * dwarf2/frame.c (execute_stack_op): Change to call evaluate
+ method.
+ * dwarf2/loc.c (dwarf2_evaluate_loc_desc_full): Change to call
+ evaluate method.
+ (dwarf2_locexpr_baton_eval): Change to call evaluate method.
+
+2021-08-05 Zoran Zaric <zoran.zaric@amd.com>
+
+ Make DWARF evaluator return a single struct value
+ The patch is addressing the issue of class users writing and reading
+ the internal data of the dwarf_expr_context class.
+
+ At this point, all conditions are met for the DWARF evaluator to return
+ an evaluation result in a form of a single struct value object.
+
+ gdb/ChangeLog:
+
+ * dwarf2/expr.c (pieced_value_funcs): Chenge to static
+ function.
+ (allocate_piece_closure): Change to static function.
+ (dwarf_expr_context::fetch_result): New function.
+ * dwarf2/expr.h (struct piece_closure): Remove declaration.
+ (struct dwarf_expr_context): fetch_result new declaration.
+ fetch, fetch_address and fetch_in_stack_memory members move
+ to private.
+ (allocate_piece_closure): Remove.
+ * dwarf2/frame.c (execute_stack_op): Change to use
+ fetch_result.
+ * dwarf2/loc.c (dwarf2_evaluate_loc_desc_full): Change to use
+ fetch_result.
+ (dwarf2_locexpr_baton_eval): Change to use fetch_result.
+ * dwarf2/loc.h (invalid_synthetic_pointer): Expose function.
+
+2021-08-05 Zoran Zaric <Zoran.Zaric@amd.com>
+
+ Make value_copy also copy the stack data member
+ Fixing a bug where the value_copy function did not copy the stack data
+ and initialized members of the struct value. This is needed for the
+ next patch where the DWARF expression evaluator is changed to return a
+ single struct value object.
+
+ * value.c (value_copy): Change to also copy the stack data
+ and initialized members.
+
+2021-08-05 Zoran Zaric <zoran.zaric@amd.com>
+
+ Move piece_closure and its support to expr.c
+ Following 5 patches series is trying to clean up the interface of the
+ DWARF expression evaluator class (dwarf_expr_context).
+
+ After merging all expression evaluators into one class, the next
+ logical step is to make a clean user interface for that class. To do
+ that, we first need to address the issue of class users writing and
+ reading the internal data of the class directly.
+
+ Fixing the case of writing is simple, it makes sense for an evaluator
+ instance to be per architecture basis. Currently, the best separation
+ seems to be per object file, so having that data (dwarf2_per_objfile)
+ as a constructor argument makes sense. It also makes sense to get the
+ address size from that object file, but unfortunately that interface
+ does not exist at the moment.
+
+ Luckily, address size information is already available to the users
+ through other means. As a result, the address size also needs to be a
+ class constructor argument, at least until a better interface for
+ acquiring that information from an object file is implemented.
+
+ The rest of the user written data comes down to a context of an
+ evaluated expression (compilation unit context, frame context and
+ passed in buffer context) and a source type information that a result
+ of evaluating expression is representing. So, it makes sense for all of
+ these to be arguments of an evaluation method.
+
+ To address the problem of reading the dwarf_expr_context class
+ internal data, we first need to understand why it is implemented that
+ way?
+
+ This is actualy a question of which existing class can be used to
+ represent both values and a location descriptions and why it is not
+ used currently?
+
+ The answer is in a struct value class/structure, but the problem is
+ that before the evaluators were merged, only one evaluator had an
+ infrastructure to resolve composite and implicit pointer location
+ descriptions.
+
+ After the merge, we are now able to use the struct value to represent
+ any result of the expression evaluation. It also makes sense to move
+ all infrastructure for those location descriptions to the expr.c file
+ considering that that is the only place using that infrastructure.
+
+ What we are left with in the end is a clean public interface of the
+ dwarf_expr_context class containing:
+
+ - constructor,
+ - destructor,
+ - push_address method and
+ - eval_exp method.
+
+ The idea with this particular patch is to move piece_closure structure
+ and the interface that handles it (lval_funcs) to expr.c file.
+
+ While implicit pointer location descriptions are still not useful in
+ the CFI context (of the AMD's DWARF standard extensions), the composite
+ location descriptions are certainly necessary to describe a results of
+ specific compiler optimizations.
+
+ Considering that a piece_closure structure is used to represent both,
+ there was no benefit in splitting them.
+
+ gdb/ChangeLog:
+
+ * dwarf2/expr.c (struct piece_closure): Add from loc.c.
+ (allocate_piece_closure): Add from loc.c.
+ (bits_to_bytes): Add from loc.c.
+ (rw_pieced_value): Add from loc.c.
+ (read_pieced_value): Add from loc.c.
+ (write_pieced_value): Add from loc.c.
+ (check_pieced_synthetic_pointer): Add from loc.c.
+ (indirect_pieced_value): Add from loc.c.
+ (coerce_pieced_ref): Add from loc.c.
+ (copy_pieced_value_closure): Add from loc.c.
+ (free_pieced_value_closure): Add from loc.c.
+ (sect_variable_value): Add from loc.c.
+ * dwarf2/loc.c (sect_variable_value): Move to expr.c.
+ (struct piece_closure): Move to expr.c.
+ (allocate_piece_closure): Move to expr.c.
+ (bits_to_bytes): Move to expr.c.
+ (rw_pieced_value): Move to expr.c.
+ (read_pieced_value): Move to expr.c.
+ (write_pieced_value): Move to expr.c.
+ (check_pieced_synthetic_pointer): Move to expr.c.
+ (indirect_pieced_value): Move to expr.c.
+ (coerce_pieced_ref): Move to expr.c.
+ (copy_pieced_value_closure): Move to expr.c.
+ (free_pieced_value_closure): Move to expr.c.
+
+2021-08-05 Zoran Zaric <zoran.zaric@amd.com>
+
+ Merge evaluate_for_locexpr_baton evaluator
+ The evaluate_for_locexpr_baton is the last derived class from the
+ dwarf_expr_context class. It's purpose is to support the passed in
+ buffer functionality.
+
+ Although, it is not really necessary to merge this class with it's
+ base class, doing that simplifies new expression evaluator design.
+
+ Considering that this functionality is going around the DWARF standard,
+ it is also reasonable to expect that with a new evaluator design and
+ extending the push object address functionality to accept any location
+ description, there will be no need to support passed in buffers.
+
+ Alternatively, it would also makes sense to abstract the interaction
+ between the evaluator and a given resource in the near future. The
+ passed in buffer would then be a specialization of that abstraction.
+
+ gdb/ChangeLog:
+
+ * dwarf2/expr.c (dwarf_expr_context::read_mem): Merge with
+ evaluate_for_locexpr_baton implementation.
+ * dwarf2/loc.c (class evaluate_for_locexpr_baton): Remove
+ class.
+ (evaluate_for_locexpr_baton::read_mem): Move to
+ dwarf_expr_context.
+ (dwarf2_locexpr_baton_eval): Instantiate dwarf_expr_context
+ instead of evaluate_for_locexpr_baton class.
+
+2021-08-05 Zoran Zaric <zoran.zaric@amd.com>
+
+ Remove empty frame and full evaluators
+ There are no virtual methods that require different specialization in
+ dwarf_expr_context class. This means that derived classes
+ dwarf_expr_executor and dwarf_evaluate_loc_desc are not needed any
+ more.
+
+ As a result of this, the evaluate_for_locexpr_baton class base class
+ is now the dwarf_expr_context class.
+
+ There might be a need for a better class hierarchy when we know more
+ about the direction of the future DWARF versions and gdb extensions,
+ but that is out of the scope of this patch series.
+
+ gdb/ChangeLog:
+
+ * dwarf2/frame.c (class dwarf_expr_executor): Remove class.
+ (execute_stack_op): Instantiate dwarf_expr_context instead of
+ dwarf_evaluate_loc_desc class.
+ * dwarf2/loc.c (class dwarf_evaluate_loc_desc): Remove class.
+ (dwarf2_evaluate_loc_desc_full): Instantiate dwarf_expr_context
+ instead of dwarf_evaluate_loc_desc class.
+ (struct evaluate_for_locexpr_baton): Derive from
+ dwarf_expr_context.
+
+2021-08-05 Zoran Zaric <Zoran.Zaric@amd.com>
+
+ Inline get_reg_value method of dwarf_expr_context
+ The get_reg_value method is a small function that is only called once,
+ so it can be inlined to simplify the dwarf_expr_context class.
+
+ gdb/ChangeLog:
+
+ * dwarf2/expr.c (dwarf_expr_context::get_reg_value): Remove
+ method.
+ (dwarf_expr_context::execute_stack_op): Inline get_reg_value
+ method.
+ * dwarf2/expr.h (dwarf_expr_context::get_reg_value): Remove
+ method.
+
+2021-08-05 Zoran Zaric <zoran.zaric@amd.com>
+
+ Move push_dwarf_reg_entry_value to expr.c
+ Following the idea of merging the evaluators, the
+ push_dwarf_reg_entry_value method can be moved from
+ dwarf_expr_executor and dwarf_evaluate_loc_desc classes
+ to their base class dwarf_expr_context.
+
+ gdb/ChangeLog:
+
+ * dwarf2/expr.c
+ (dwarf_expr_context::push_dwarf_reg_entry_value): Move from
+ dwarf_evaluate_loc_desc.
+ * dwarf2/frame.c
+ (dwarf_expr_executor::push_dwarf_reg_entry_value): Remove
+ method.
+ * dwarf2/loc.c (dwarf_expr_reg_to_entry_parameter): Expose
+ function.
+ (dwarf_evaluate_loc_desc::push_dwarf_reg_entry_value): Move to
+ dwarf_expr_context.
+ * dwarf2/loc.h (dwarf_expr_reg_to_entry_parameter): Expose
+ function.
+
+2021-08-05 Zoran Zaric <zoran.zaric@amd.com>
+
+ Move read_mem to dwarf_expr_context
+ Following the idea of merging the evaluators, the read_mem method can
+ be moved from dwarf_expr_executor and dwarf_evaluate_loc_desc classes
+ to their base class dwarf_expr_context.
+
+ gdb/ChangeLog:
+
+ * dwarf2/expr.c (dwarf_expr_context::read_mem): Move from
+ dwarf_evaluate_loc_desc.
+ * dwarf2/frame.c (dwarf_expr_executor::read_mem): Remove
+ method.
+ * dwarf2/loc.c (dwarf_evaluate_loc_desc::read_mem): Move to
+ dwarf_expr_context.
+
+2021-08-05 Zoran Zaric <Zoran.Zaric@amd.com>
+
+ Move get_object_address to dwarf_expr_context
+ Following the idea of merging the evaluators, the get_object_address
+ and can be moved from dwarf_expr_executor and dwarf_evaluate_loc_desc
+ classes to their base class dwarf_expr_context.
+
+ gdb/ChangeLog:
+
+ * dwarf2/expr.c (dwarf_expr_context::get_object_address): Move
+ from dwarf_evaluate_loc_desc.
+ (class dwarf_expr_context): Add object address member to
+ dwarf_expr_context.
+ * dwarf2/expr.h (dwarf_expr_context::get_frame_pc): Remove
+ method.
+ * dwarf2/frame.c (dwarf_expr_executor::get_object_address):
+ Remove method.
+ * dwarf2/loc.c (dwarf_evaluate_loc_desc::get_object_address):
+ move to dwarf_expr_context.
+ (class dwarf_evaluate_loc_desc): Move object address member to
+ dwarf_expr_context.
+
+2021-08-05 Zoran Zaric <zoran.zaric@amd.com>
+
+ Move dwarf_call to dwarf_expr_context
+ Following the idea of merging the evaluators, the dwarf_call and
+ get_frame_pc method can be moved from dwarf_expr_executor and
+ dwarf_evaluate_loc_desc classes to their base class dwarf_expr_context.
+ Once this is done, the get_frame_pc can be replace with lambda
+ function.
+
+ gdb/ChangeLog:
+
+ * dwarf2/expr.c (dwarf_expr_context::dwarf_call): Move from
+ dwarf_evaluate_loc_desc.
+ (dwarf_expr_context::get_frame_pc): Replace with lambda.
+ * dwarf2/expr.h (dwarf_expr_context::get_frame_pc): Remove
+ method.
+ * dwarf2/frame.c (dwarf_expr_executor::dwarf_call): Remove
+ method.
+ (dwarf_expr_executor::get_frame_pc): Remove method.
+ * dwarf2/loc.c (dwarf_evaluate_loc_desc::get_frame_pc): Remove
+ method.
+ (dwarf_evaluate_loc_desc::dwarf_call): Move to
+ dwarf_expr_context.
+ (per_cu_dwarf_call): Inline function.
+
+2021-08-05 Zoran Zaric <zoran.zaric@amd.com>
+
+ Move compilation unit info to dwarf_expr_context
+ This patch moves the compilation unit context information and support
+ from dwarf_expr_executor and dwarf_evaluate_loc_desc to
+ dwarf_expr_context evaluator. The idea is to report an error when a
+ given operation requires a compilation unit information to be resolved,
+ which is not available.
+
+ With this change, it also makes sense to always acquire ref_addr_size
+ information from the compilation unit context, considering that all
+ DWARF operations that refer to that information require a compilation
+ unit context to be present during their evaluation.
+
+ gdb/ChangeLog:
+
+ * dwarf2/expr.c (ensure_have_per_cu): New function.
+ (dwarf_expr_context::dwarf_expr_context): Add compilation unit
+ context information.
+ (dwarf_expr_context::get_base_type): Move from
+ dwarf_evaluate_loc_desc.
+ (dwarf_expr_context::get_addr_index): Remove method.
+ (dwarf_expr_context::dwarf_variable_value): Remove method.
+ (dwarf_expr_context::execute_stack_op): Call compilation unit
+ context info check. Inline get_addr_index and
+ dwarf_variable_value methods.
+ * dwarf2/expr.h (struct dwarf_expr_context): Add compilation
+ context info.
+ (dwarf_expr_context::get_addr_index): Remove method.
+ (dwarf_expr_context::dwarf_variable_value): Remove method.
+ (dwarf_expr_context::ref_addr_size): Remove member.
+ * dwarf2/frame.c (dwarf_expr_executor::get_addr_index): Remove
+ method.
+ (dwarf_expr_executor::dwarf_variable_value): Remove method.
+ * dwarf2/loc.c (sect_variable_value): Expose function.
+ (dwarf_evaluate_loc_desc::get_addr_index): Remove method.
+ (dwarf_evaluate_loc_desc::dwarf_variable_value): Remove method.
+ (class dwarf_evaluate_loc_desc): Move compilation unit context
+ information to dwarf_expr_context class.
+ * dwarf2/loc.h (sect_variable_value): Expose function.
+
+2021-08-05 Zoran Zaric <Zoran.Zaric@amd.com>
+
+ Remove get_frame_cfa from dwarf_expr_context
+ Following the idea of merging the evaluators, the get_frame_cfa method
+ can be moved from dwarf_expr_executor and dwarf_evaluate_loc_desc
+ classes to their base class dwarf_expr_context. Once this is done,
+ it becomes apparent that the method is only called once and it can be
+ inlined.
+
+ It is also necessary to check if the frame context information was
+ provided before the DW_OP_call_frame_cfa operation is executed.
+
+ gdb/ChangeLog:
+
+ * dwarf2/expr.c (dwarf_expr_context::get_frame_cfa): Remove
+ method.
+ (dwarf_expr_context::execute_stack_op): Call frame context info
+ check for DW_OP_call_frame_cfa. Remove use of get_frame_cfa.
+ * dwarf2/expr.h (dwarf_expr_context::get_frame_cfa): Remove
+ method.
+ * dwarf2/frame.c (dwarf_expr_context::get_frame_cfa): Remove
+ method.
+ * dwarf2/loc.c (dwarf_expr_context::get_frame_cfa): Remove
+ method.
+
+2021-08-05 Zoran Zaric <zoran.zaric@amd.com>
+
+ Move frame context info to dwarf_expr_context
+ Following 15 patches in this patch series is cleaning up the design of
+ the DWARF expression evaluator (dwarf_expr_context) to make future
+ extensions of that evaluator easier and cleaner to implement.
+
+ There are three subclasses of the dwarf_expr_context class
+ (dwarf_expr_executor, dwarf_evaluate_loc_desc and
+ evaluate_for_locexpr_baton). Here is a short description of each class:
+
+ - dwarf_expr_executor is evaluating a DWARF expression in a context
+ of a Call Frame Information. The overridden methods of this subclass
+ report an error if a specific DWARF operation, represented by that
+ method, is not allowed in a CFI context. The source code of this
+ subclass lacks the support for composite as well as implicit pointer
+ location description.
+
+ - dwarf_evaluate_loc_desc can evaluate any expression with no
+ restrictions. All of the methods that this subclass overrides are
+ actually doing what they are intended to do. This subclass contains
+ a full support for all location description types.
+
+ - evaluate_for_locexpr_baton subclass is a specialization of the
+ dwarf_evaluate_loc_desc subclass and it's function is to add
+ support for passed in buffers. This seems to be a way to go around
+ the fact that DWARF standard lacks a bit offset support for memory
+ location descriptions as well as using any location description for
+ the push object address functionality.
+
+ It all comes down to this question: what is a function of a DWARF
+ expression evaluator?
+
+ Is it to evaluate the expression in a given context or to check the
+ correctness of that expression in that context?
+
+ Currently, the only reason why there is a dwarf_expr_executor subclass
+ is to report an invalid DWARF expression in a context of a CFI, but is
+ that what the evaluator is supposed to do considering that the evaluator
+ is not tied to a given DWARF version?
+
+ There are more and more vendor and GNU extensions that are not part of
+ the DWARF standard, so is it that impossible to expect that some of the
+ extensions could actually lift the previously imposed restrictions of
+ the CFI context? Not to mention that every new DWARF version is lifting
+ some restrictions anyway.
+
+ The thing that makes more sense for an evaluator to do, is to take the
+ context of an evaluation and checks the requirements of every operation
+ evaluated against that context. With this approach, the evaluator would
+ report an error only if parts of the context, necessary for the
+ evaluation, are missing.
+
+ If this approach is taken, then the unification of the
+ dwarf_evaluate_loc_desc, dwarf_expr_executor and dwarf_expr_context
+ is the next logical step. This makes a design of the DWARF expression
+ evaluator cleaner and allows more flexibility when supporting future
+ vendor and GNU extensions.
+
+ Additional benefit here is that now all evaluators have access to all
+ location description types, which means that a vendor extended CFI
+ rules could support composite location description as well. This also
+ means that a new evaluator interface can be changed to return a single
+ struct value (that describes the result of the evaluation) instead of
+ a caller poking around the dwarf_expr_context internal data for answers
+ (like it is done currently).
+
+ This patch starts the merging process by moving the frame context
+ information and support from dwarf_expr_executor and
+ dwarf_evaluate_loc_desc to dwarf_expr_context evaluator. The idea
+ is to report an error when a given operation requires a frame
+ information to be resolved, if that information is not present.
+
+ gdb/ChangeLog:
+
+ * dwarf2/expr.c (ensure_have_frame): New function.
+ (read_addr_from_reg): Add from frame.c.
+ (dwarf_expr_context::dwarf_expr_context): Add frame info to
+ dwarf_expr_context.
+ (dwarf_expr_context::read_addr_from_reg): Remove.
+ (dwarf_expr_context::get_reg_value): Move from
+ dwarf_evaluate_loc_desc.
+ (dwarf_expr_context::get_frame_base): Move from
+ dwarf_evaluate_loc_desc.
+ (dwarf_expr_context::execute_stack_op): Call frame context info
+ check. Remove use of read_addr_from_reg method.
+ * dwarf2/expr.h (struct dwarf_expr_context): Add frame info
+ member, read_addr_from_reg, get_reg_value and get_frame_base
+ declaration.
+ (read_addr_from_reg): Move to expr.c.
+ * dwarf2/frame.c (read_addr_from_reg): Move to
+ dwarf_expr_context.
+ (dwarf_expr_executor::read_addr_from_reg): Remove.
+ (dwarf_expr_executor::get_frame_base): Remove.
+ (dwarf_expr_executor::get_reg_value): Remove.
+ (execute_stack_op): Use read_addr_from_reg function instead of
+ read_addr_from_reg method.
+ * dwarf2/loc.c (dwarf_evaluate_loc_desc::get_frame_base): Move
+ to dwarf_expr_context.
+ (dwarf_evaluate_loc_desc::get_reg_value): Move to
+ dwarf_expr_context.
+ (dwarf_evaluate_loc_desc::read_addr_from_reg): Remove.
+ (dwarf2_locexpr_baton_eval):Use read_addr_from_reg function
+ instead of read_addr_from_reg method.
+
+2021-08-05 Zoran Zaric <Zoran.Zaric@amd.com>
+
+ Cleanup of the dwarf_expr_context constructor
+ Move the initial values for dwarf_expr_context class data members
+ to the class declaration in expr.h.
+
+ gdb/ChangeLog:
+
+ * dwarf2/expr.c (dwarf_expr_context::dwarf_expr_context):
+ Remove initial data members values.
+ * dwarf2/expr.h (dwarf_expr_context): Add initial values
+ to the class data members.
+
+2021-08-05 Zoran Zaric <Zoran.Zaric@amd.com>
+
+ Replace the symbol needs evaluator with a parser
+ This patch addresses a design problem with the symbol_needs_eval_context
+ class. It exposes the problem by introducing two new testsuite test
+ cases.
+
+ To explain the issue, I first need to explain the dwarf_expr_context
+ class that the symbol_needs_eval_context class derives from.
+
+ The intention behind the dwarf_expr_context class is to commonize the
+ DWARF expression evaluation mechanism for different evaluation
+ contexts. Currently in gdb, the evaluation context can contain some or
+ all of the following information: architecture, object file, frame and
+ compilation unit.
+
+ Depending on the information needed to evaluate a given expression,
+ there are currently three distinct DWARF expression evaluators:
+
+ - Frame: designed to evaluate an expression in the context of a call
+ frame information (dwarf_expr_executor class). This evaluator doesn't
+ need a compilation unit information.
+
+ - Location description: designed to evaluate an expression in the
+ context of a source level information (dwarf_evaluate_loc_desc
+ class). This evaluator expects all information needed for the
+ evaluation of the given expression to be present.
+
+ - Symbol needs: designed to answer a question about the parts of the
+ context information required to evaluate a DWARF expression behind a
+ given symbol (symbol_needs_eval_context class). This evaluator
+ doesn't need a frame information.
+
+ The functional difference between the symbol needs evaluator and the
+ others is that this evaluator is not meant to interact with the actual
+ target. Instead, it is supposed to check which parts of the context
+ information are needed for the given DWARF expression to be evaluated by
+ the location description evaluator.
+
+ The idea is to take advantage of the existing dwarf_expr_context
+ evaluation mechanism and to fake all required interactions with the
+ actual target, by returning back dummy values. The evaluation result is
+ returned as one of three possible values, based on operations found in a
+ given expression:
+
+ - SYMBOL_NEEDS_NONE,
+ - SYMBOL_NEEDS_REGISTERS and
+ - SYMBOL_NEEDS_FRAME.
+
+ The problem here is that faking results of target interactions can yield
+ an incorrect evaluation result.
+
+ For example, if we have a conditional DWARF expression, where the
+ condition depends on a value read from an actual target, and the true
+ branch of the condition requires a frame information to be evaluated,
+ while the false branch doesn't, fake target reads could conclude that a
+ frame information is not needed, where in fact it is. This wrong
+ information would then cause the expression to be actually evaluated (by
+ the location description evaluator) with a missing frame information.
+ This would then crash the debugger.
+
+ The gdb.dwarf2/symbol_needs_eval_fail.exp test introduces this
+ scenario, with the following DWARF expression:
+
+ DW_OP_addr $some_variable
+ DW_OP_deref
+
+ # conditional jump to DW_OP_bregx
+ DW_OP_bra 4
+ DW_OP_lit0
+
+ # jump to DW_OP_stack_value
+ DW_OP_skip 3
+ DW_OP_bregx $dwarf_regnum 0
+ DW_OP_stack_value
+
+ This expression describes a case where some variable dictates the
+ location of another variable. Depending on a value of some_variable, the
+ variable whose location is described by this expression is either read
+ from a register or it is defined as a constant value 0. In both cases,
+ the value will be returned as an implicit location description on the
+ DWARF stack.
+
+ Currently, when the symbol needs evaluator fakes a memory read from the
+ address behind the some_variable variable, the constant value 0 is used
+ as the value of the variable A, and the check returns the
+ SYMBOL_NEEDS_NONE result.
+
+ This is clearly a wrong result and it causes the debugger to crash.
+
+ The scenario might sound strange to some people, but it comes from a
+ SIMD/SIMT architecture where $some_variable is an execution mask. In
+ any case, it is a valid DWARF expression, and GDB shouldn't crash while
+ evaluating it. Also, a similar example could be made based on a
+ condition of the frame base value, where if that value is concluded to
+ be 0, the variable location could be defaulted to a TLS based memory
+ address.
+
+ The gdb.dwarf2/symbol_needs_eval_timeout.exp test introduces a second
+ scenario. This scenario is a bit more abstract due to the DWARF
+ assembler lacking the CFI support, but it exposes a different
+ manifestation of the same problem. Like in the previous scenario, the
+ DWARF expression used in the test is valid:
+
+ DW_OP_lit1
+ DW_OP_addr $some_variable
+ DW_OP_deref
+
+ # jump to DW_OP_fbreg
+ DW_OP_skip 4
+ DW_OP_drop
+ DW_OP_fbreg 0
+ DW_OP_dup
+ DW_OP_lit0
+ DW_OP_eq
+
+ # conditional jump to DW_OP_drop
+ DW_OP_bra -9
+ DW_OP_stack_value
+
+ Similarly to the previous scenario, the location of a variable A is an
+ implicit location description with a constant value that depends on a
+ value held by a global variable. The difference from the previous case
+ is that DWARF expression contains a loop instead of just one branch. The
+ end condition of that loop depends on the expectation that a frame base
+ value is never zero. Currently, the act of faking the target reads will
+ cause the symbol needs evaluator to get stuck in an infinite loop.
+
+ Somebody could argue that we could change the fake reads to return
+ something else, but that would only hide the real problem.
+
+ The general impression seems to be that the desired design is to have
+ one class that deals with parsing of the DWARF expression, while there
+ are virtual methods that deal with specifics of some operations.
+
+ Using an evaluator mechanism here doesn't seem to be correct, because
+ the act of evaluation relies on accessing the data from the actual
+ target with the possibility of skipping the evaluation of some parts of
+ the expression.
+
+ To better explain the proposed solution for the issue, I first need to
+ explain a couple more details behind the current design:
+
+ There are multiple places in gdb that handle DWARF expression parsing
+ for different purposes. Some are in charge of converting the expression
+ to some other internal representation (decode_location_expression,
+ disassemble_dwarf_expression and dwarf2_compile_expr_to_ax), some are
+ analysing the expression for specific information
+ (compute_stack_depth_worker) and some are in charge of evaluating the
+ expression in a given context (dwarf_expr_context::execute_stack_op
+ and decode_locdesc).
+
+ The problem is that all those functions have a similar (large) switch
+ statement that handles each DWARF expression operation. The result of
+ this is a code duplication and harder maintenance.
+
+ As a step into the right direction to solve this problem (at least for
+ the purpose of a DWARF expression evaluation) the expression parsing was
+ commonized inside of an evaluator base class (dwarf_expr_context). This
+ makes sense for all derived classes, except for the symbol needs
+ evaluator (symbol_needs_eval_context) class.
+
+ As described previously the problem with this evaluator is that if the
+ evaluator is not allowed to access the actual target, it is not really
+ evaluating.
+
+ Instead, the desired function of a symbol needs evaluator seems to fall
+ more into expression analysis category. This means that a more natural
+ fit for this evaluator is to be a symbol needs analysis, similar to the
+ existing compute_stack_depth_worker analysis.
+
+ Another problem is that using a heavyweight mechanism of an evaluator
+ to do an expression analysis seems to be an unneeded overhead. It also
+ requires a more complicated design of the parent class to support fake
+ target reads.
+
+ The reality is that the whole symbol_needs_eval_context class can be
+ replaced with a lightweight recursive analysis function, that will give
+ more correct result without compromising the design of the
+ dwarf_expr_context class. The analysis treats the expression byte
+ stream as a DWARF operation graph, where each graph node can be
+ visited only once and each operation can decide if the frame context
+ is needed for their evaluation.
+
+ The downside of this approach is adding of one more similar switch
+ statement, but at least this way the new symbol needs analysis will be
+ a lightweight mechnism and it will provide a correct result for any
+ given DWARF expression.
+
+ A more desired long term design would be to have one class that deals
+ with parsing of the DWARF expression, while there would be a virtual
+ methods that deal with specifics of some DWARF operations. Then that
+ class would be used as a base for all DWARF expression parsing mentioned
+ at the beginning.
+
+ This however, requires a far bigger changes that are out of the scope
+ of this patch series.
+
+ The new analysis requires the DWARF location description for the
+ argc argument of the main function to change in the assembly file
+ gdb.python/amd64-py-framefilter-invalidarg.S. Originally, expression
+ ended with a 0 value byte, which was never reached by the symbol needs
+ evaluator, because it was detecting a stack underflow when evaluating
+ the operation before. The new approach does not simulate a DWARF
+ stack anymore, so the 0 value byte needs to be removed because it
+ makes the DWARF expression invalid.
+
+ gdb/ChangeLog:
+
+ * dwarf2/loc.c (class symbol_needs_eval_context): Remove.
+ (dwarf2_get_symbol_read_needs): New function.
+ (dwarf2_loc_desc_get_symbol_read_needs): Remove.
+ (locexpr_get_symbol_read_needs): Use
+ dwarf2_get_symbol_read_needs.
+
+ gdb/testsuite/ChangeLog:
+
+ * gdb.python/amd64-py-framefilter-invalidarg.S : Update argc
+ DWARF location expression.
+ * lib/dwarf.exp (_location): Handle DW_OP_fbreg.
+ * gdb.dwarf2/symbol_needs_eval.c: New file.
+ * gdb.dwarf2/symbol_needs_eval_fail.exp: New file.
+ * gdb.dwarf2/symbol_needs_eval_timeout.exp: New file.
+
+2021-08-05 Cui,Lili <lili.cui@intel.com>
+
+ [PATCH 2/2] Add tests for Intel AVX512_FP16 instructions
+ Intel AVX512 FP16 instructions use maps 3, 5 and 6. Maps 5 and 6 use 3 bits
+ in the EVEX.mmm field (0b101, 0b110). Map 5 is for instructions that were FP32
+ in map 1 (0Fxx). Map 6 is for instructions that were FP32 in map 2 (0F38xx).
+ There are some exceptions to this rule. Some things in map 1 (0Fxx) with imm8
+ operands predated our current conventions; those instructions moved to map 3.
+ FP32 things in map 3 (0F3Axx) found new opcodes in map3 for FP16 because map3
+ is very sparsely populated. Most of the FP16 instructions share opcodes and
+ prefix (EVEX.pp) bits with the related FP32 operations.
+
+ Intel AVX512 FP16 instructions has new displacements scaling rules, please refer
+ to the public software developer manual for detail information.
+
+ gas/
+
+ 2021-08-05 Igor Tsimbalist <igor.v.tsimbalist@intel.com>
+ H.J. Lu <hongjiu.lu@intel.com>
+ Wei Xiao <wei3.xiao@intel.com>
+ Lili Cui <lili.cui@intel.com>
+
+ * testsuite/gas/i386/i386.exp: Run FP16 tests.
+ * testsuite/gas/i386/avx512_fp16-intel.d: New test.
+ * testsuite/gas/i386/avx512_fp16-inval-bcast.l: Ditto.
+ * testsuite/gas/i386/avx512_fp16-inval-bcast.s: Ditto.
+ * testsuite/gas/i386/avx512_fp16.d: Ditto.
+ * testsuite/gas/i386/avx512_fp16.s: Ditto.
+ * testsuite/gas/i386/avx512_fp16_pseudo_ops.d: Ditto.
+ * testsuite/gas/i386/avx512_fp16_pseudo_ops.s: Ditto.
+ * testsuite/gas/i386/avx512_fp16_vl-intel.d: Ditto.
+ * testsuite/gas/i386/avx512_fp16_vl.d: Ditto.
+ * testsuite/gas/i386/avx512_fp16_vl.s: Ditto.
+ * testsuite/gas/i386/x86-64-avx512_fp16-intel.d: Ditto.
+ * testsuite/gas/i386/x86-64-avx512_fp16-inval-bcast.l: Ditto.
+ * testsuite/gas/i386/x86-64-avx512_fp16-inval-bcast.s: Ditto.
+ * testsuite/gas/i386/x86-64-avx512_fp16.d: Ditto.
+ * testsuite/gas/i386/x86-64-avx512_fp16.s: Ditto.
+ * testsuite/gas/i386/x86-64-avx512_fp16_pseudo_ops.d: Ditto.
+ * testsuite/gas/i386/x86-64-avx512_fp16_pseudo_ops.s: Ditto.
+ * testsuite/gas/i386/x86-64-avx512_fp16_vl-intel.d: Ditto.
+ * testsuite/gas/i386/x86-64-avx512_fp16_vl.d: Ditto.
+ * testsuite/gas/i386/x86-64-avx512_fp16_vl.s: Ditto.
+ * testsuite/gas/i386/x86-64-avx512_fp16-inval-register.l: Ditto.
+ * testsuite/gas/i386/x86-64-avx512_fp16-inval-register.s: Ditto.
+ * testsuite/gas/i386/x86-64-avx512_fp16-bad.d: Ditto.
+ * testsuite/gas/i386/x86-64-avx512_fp16-bad.s: Ditto.
+ * testsuite/gas/i386/x86-64-default-suffix-avx.d: Add new testcase.
+ * testsuite/gas/i386/x86-64-default-suffix.d: Ditto.
+ * testsuite/gas/i386/x86-64-default-suffix.s: Ditto.
+ * testsuite/gas/i386/xmmword.l: Ditto.
+ * testsuite/gas/i386/xmmword.s: Ditto.
+
+2021-08-05 Cui,Lili <lili.cui@intel.com>
+
+ [PATCH 1/2] Enable Intel AVX512_FP16 instructions
+ Intel AVX512 FP16 instructions use maps 3, 5 and 6. Maps 5 and 6 use 3 bits
+ in the EVEX.mmm field (0b101, 0b110). Map 5 is for instructions that were FP32
+ in map 1 (0Fxx). Map 6 is for instructions that were FP32 in map 2 (0F38xx).
+ There are some exceptions to this rule. Some things in map 1 (0Fxx) with imm8
+ operands predated our current conventions; those instructions moved to map 3.
+ FP32 things in map 3 (0F3Axx) found new opcodes in map3 for FP16 because map3
+ is very sparsely populated. Most of the FP16 instructions share opcodes and
+ prefix (EVEX.pp) bits with the related FP32 operations.
+
+ Intel AVX512 FP16 instructions has new displacements scaling rules, please refer
+ to the public software developer manual for detail information.
+
+ gas/
+
+ 2021-08-05 Igor Tsimbalist <igor.v.tsimbalist@intel.com>
+ H.J. Lu <hongjiu.lu@intel.com>
+ Wei Xiao <wei3.xiao@intel.com>
+ Lili Cui <lili.cui@intel.com>
+
+ * config/tc-i386.c (struct Broadcast_Operation): Adjust comment.
+ (cpu_arch): Add .avx512_fp16.
+ (cpu_noarch): Add noavx512_fp16.
+ (pte): Add evexmap5 and evexmap6.
+ (build_evex_prefix): Handle EVEXMAP5 and EVEXMAP6.
+ (check_VecOperations): Handle {1to32}.
+ (check_VecOperands): Handle CheckRegNumb.
+ (check_word_reg): Handle Toqword.
+ (i386_error): Add invalid_dest_and_src_register_set.
+ (match_template): Handle invalid_dest_and_src_register_set.
+ * doc/c-i386.texi: Document avx512_fp16, noavx512_fp16.
+
+ opcodes/
+
+ 2021-08-05 Igor Tsimbalist <igor.v.tsimbalist@intel.com>
+ H.J. Lu <hongjiu.lu@intel.com>
+ Wei Xiao <wei3.xiao@intel.com>
+ Lili Cui <lili.cui@intel.com>
+
+ * i386-dis.c (EXwScalarS): New.
+ (EXxh): Ditto.
+ (EXxhc): Ditto.
+ (EXxmmqh): Ditto.
+ (EXxmmqdh): Ditto.
+ (EXEvexXwb): Ditto.
+ (DistinctDest_Fixup): Ditto.
+ (enum): Add xh_mode, evex_half_bcst_xmmqh_mode, evex_half_bcst_xmmqdh_mode
+ and w_swap_mode.
+ (enum): Add PREFIX_EVEX_0F3A08_W_0, PREFIX_EVEX_0F3A0A_W_0,
+ PREFIX_EVEX_0F3A26, PREFIX_EVEX_0F3A27, PREFIX_EVEX_0F3A56,
+ PREFIX_EVEX_0F3A57, PREFIX_EVEX_0F3A66, PREFIX_EVEX_0F3A67,
+ PREFIX_EVEX_0F3AC2, PREFIX_EVEX_MAP5_10, PREFIX_EVEX_MAP5_11,
+ PREFIX_EVEX_MAP5_1D, PREFIX_EVEX_MAP5_2A, PREFIX_EVEX_MAP5_2C,
+ PREFIX_EVEX_MAP5_2D, PREFIX_EVEX_MAP5_2E, PREFIX_EVEX_MAP5_2F,
+ PREFIX_EVEX_MAP5_51, PREFIX_EVEX_MAP5_58, PREFIX_EVEX_MAP5_59,
+ PREFIX_EVEX_MAP5_5A_W_0, PREFIX_EVEX_MAP5_5A_W_1,
+ PREFIX_EVEX_MAP5_5B_W_0, PREFIX_EVEX_MAP5_5B_W_1,
+ PREFIX_EVEX_MAP5_5C, PREFIX_EVEX_MAP5_5D, PREFIX_EVEX_MAP5_5E,
+ PREFIX_EVEX_MAP5_5F, PREFIX_EVEX_MAP5_78, PREFIX_EVEX_MAP5_79,
+ PREFIX_EVEX_MAP5_7A, PREFIX_EVEX_MAP5_7B, PREFIX_EVEX_MAP5_7C,
+ PREFIX_EVEX_MAP5_7D_W_0, PREFIX_EVEX_MAP6_13, PREFIX_EVEX_MAP6_56,
+ PREFIX_EVEX_MAP6_57, PREFIX_EVEX_MAP6_D6, PREFIX_EVEX_MAP6_D7
+ (enum): Add EVEX_MAP5 and EVEX_MAP6.
+ (enum): Add EVEX_W_MAP5_5A, EVEX_W_MAP5_5B,
+ EVEX_W_MAP5_78_P_0, EVEX_W_MAP5_78_P_2, EVEX_W_MAP5_79_P_0,
+ EVEX_W_MAP5_79_P_2, EVEX_W_MAP5_7A_P_2, EVEX_W_MAP5_7A_P_3,
+ EVEX_W_MAP5_7B_P_2, EVEX_W_MAP5_7C_P_0, EVEX_W_MAP5_7C_P_2,
+ EVEX_W_MAP5_7D, EVEX_W_MAP6_13_P_0, EVEX_W_MAP6_13_P_2,
+ (get_valid_dis386): Properly handle new instructions.
+ (intel_operand_size): Handle new modes.
+ (OP_E_memory): Ditto.
+ (OP_EX): Ditto.
+ * i386-dis-evex.h: Updated for AVX512_FP16.
+ * i386-dis-evex-mod.h: Updated for AVX512_FP16.
+ * i386-dis-evex-prefix.h: Updated for AVX512_FP16.
+ * i386-dis-evex-reg.h : Updated for AVX512_FP16.
+ * i386-dis-evex-w.h : Updated for AVX512_FP16.
+ * i386-gen.c (cpu_flag_init): Add CPU_AVX512_FP16_FLAGS,
+ and CPU_ANY_AVX512_FP16_FLAGS. Update CPU_ANY_AVX512F_FLAGS
+ and CPU_ANY_AVX512BW_FLAGS.
+ (cpu_flags): Add CpuAVX512_FP16.
+ (opcode_modifiers): Add DistinctDest.
+ * i386-opc.h (enum): (AVX512_FP16): New.
+ (i386_opcode_modifier): Add reqdistinctreg.
+ (i386_cpu_flags): Add cpuavx512_fp16.
+ (EVEXMAP5): Defined as a macro.
+ (EVEXMAP6): Ditto.
+ * i386-opc.tbl: Add Intel AVX512_FP16 instructions.
+ * i386-init.h: Regenerated.
+ * i386-tbl.h: Ditto.
+
+2021-08-05 Alan Modra <amodra@gmail.com>
+
+ PR28167, vms-alpha build_module_list
+ PR 28167
+ * vms-alpha.c (build_module_list): Malloc and free section contents.
+ Don't read past end of section.
+
+2021-08-05 Alan Modra <amodra@gmail.com>
+
+ PR28166, _bfd_elf_mips_get_relocated_section_contents
+ Some of the code paths unpacking mips relocs left arelent->sym_ptr_ptr
+ uninitialised.
+
+ PR 28166
+ * elf64-mips.c (mips_elf64_slurp_one_reloc_table): Don't leave
+ sym_ptr_ptr uninitialised.
+
+2021-08-05 Alan Modra <amodra@gmail.com>
+
+ PR28165, buffer overflow in elf32-rx.c:rx_info_to_howto_rela
+ PR 28165
+ * elf32-rx.c (rx_elf_howto_table): Add missing empty entries.
+ (rx_info_to_howto_rela): Assert rx_elf_howto_table is correct size.
+ Use actual size when sanity checking r_type.
+
+2021-08-05 Alan Modra <amodra@gmail.com>
+
+ Re: elf: Treat undefined version as hidden
+ Fix fallout in cris testsuite
+
+ PR binutils/28158
+ * ld-cris/libdso-1c.d: Update for version display change.
+ * ld-cris/libdso-15b.d: Likewise.
+
+2021-08-05 Andrew Burgess <andrew.burgess@embecosm.com>
+
+ gdb/testsuite: update test gdb.base/step-over-syscall.exp
+ I was looking at PR gdb/19675 and the related test
+ gdb.base/step-over-syscall.exp. This test includes a call to kfail
+ when we are testing a displaced step over a clone syscall.
+
+ While looking at the test I removed the call to kfail and ran the
+ test, and was surprised that the test passed.
+
+ I ran the test a few times and it does sometimes fail, but mostly it
+ passed fine.
+
+ PR gdb/19675 describes how, when we displaced step over a clone, the
+ new thread is created with a $pc in the displaced step buffer. GDB
+ then fails to "fix" this $pc (for the new thread), and the thread will
+ be set running with its current $pc value. This means that the new
+ thread will just start executing from whatever happens to be after the
+ displaced stepping buffer.
+
+ In the original PR gdb/19675 bug report Yao Qi was seeing the new
+ thread cause a segfault, the problem is, what actually happens is
+ totally undefined.
+
+ On my machine, I'm seeing the new thread reenter main, it then starts
+ trying to run the test again (in the new thread). This just happens
+ to be safe enough (in this simple test) that most of the time the
+ inferior doesn't crash.
+
+ In this commit I try to make the test slightly more likely to fail by
+ doing a couple of things.
+
+ First, I added a static variable to main, this is set true when the
+ first thread enters main, if a second thread ever enters main then I
+ force an abort.
+
+ Second, when the test is finishing I want to ensure that the new
+ threads have had a chance to do "something bad" if they are going to.
+ So I added a global counter, as each thread starts successfully it
+ decrements the counter. The main thread does not proceed to the final
+ marker function (where GDB has placed a breakpoint) until all threads
+ have started successfully. This means that if the newly created
+ thread doesn't successfully enter clone_fn then the counter will never
+ reach zero and the test will timeout.
+
+ With these two changes my hope is that the test should fail more
+ reliably, and so, I have also changed the test to call setup_kfail
+ before the specific steps that we expect to misbehave instead of just
+ calling kfail and skipping parts of the test completely. The benefit
+ of this is that if/when we fix GDB this test will start to KPASS and
+ we'll know to update this test to remove the setup_kfail call.
+
+2021-08-05 GDB Administrator <gdbadmin@sourceware.org>
+
+ Automatic date update in version.in
+
+2021-08-05 Lancelot SIX <lsix@lancelotsix.com>
+
+ gdb: Use unwinder name in frame_info::to_string
+ While working on a stack unwinding issue using 'set debug frame on', I
+ noticed the frame_info::to_string method could be slightly improved.
+
+ Unwinders have been given a name in
+ a154d838a70e96d888620c072e2d6ea8bdf044ca. Before this patch, frame_info
+ debug output prints the host address of the used unwinder, which is not
+ easy to interpret. This patch proposes to use the unwinder name
+ instead since we now have it.
+
+ Before the patch:
+
+ {level=1,type=NORMAL_FRAME,unwind=0x2ac1763ec0,pc=0x3ff7fc3460,id={stack=0x3ff7ea79b0,code=0x0000003ff7fc33ac,!special},func=0x3ff7fc33ac}
+
+ With the patch:
+
+ {level=1,type=NORMAL_FRAME,unwinder="riscv prologue",pc=0x3ff7fc3460,id={stack=0x3ff7ea79b0,code=0x0000003ff7fc33ac,!special},func=0x3ff7fc33ac}
+
+ Tested on riscv64-linux-gnu.
+
+2021-08-04 Simon Marchi <simon.marchi@polymtl.ca>
+
+ gdb/testsuite: fix gdb.base/info-macros.exp with clang
+ The test gdb.base/info-macros.exp says that it doesn't pass the "debug"
+ option to prepare_for_testing because that would cause -g to appear
+ after -g3 on the command line, and that would cause some gcc versions to
+ not include macro info. I don't know what gcc versions this refers to.
+ I tested with gcc 4.8, and that works fine with -g after -g3.
+
+ The current state is problematic when testing with CC_FOR_TARGET=clang,
+ because then only -fdebug-macro is included. No -g switch if included,
+ meaning we get a binary without any debug info, and the test fails.
+
+ One way to fix it would be to add "debug" to the options when the
+ compiler is clang.
+
+ However, the solution I chose was to specify "debug" in any case, even
+ for gcc. Other macro tests such as gdb.base/macscp.exp do perfectly
+ fine with it. Also, this lets the test use the debug flag specified by
+ the board file. For example, we can test with GCC and DWARF 5, with:
+
+ $ make check RUNTESTFLAGS="--target_board unix/gdb:debug_flags=-gdwarf-5" TESTS="gdb.base/info-macros.exp"
+
+ With the hard-coded -g3, this wouldn't actually test with DWARF 5.
+
+ Change-Id: I33fa92ee545007d3ae9c52c4bb2d5be6b5b698f1
+
+2021-08-04 Simon Marchi <simon.marchi@polymtl.ca>
+
+ gdb: avoid dereferencing empty str_offsets_base optional in dwarf_decode_macros
+ Since 4d7188abfdf2 ("gdbsupport: add debug assertions in
+ gdb::optional::get"), some macro-related tests fail on Ubuntu 20.04 with
+ the system gcc 9.3.0 compiler when building with _GLIBCXX_DEBUG. For
+ example, gdb.base/info-macros.exp results in:
+
+ (gdb) break -qualified main
+ /home/smarchi/src/binutils-gdb/gdb/../gdbsupport/gdb_optional.h:206: internal-error: T& gdb::optional<T>::get() [with T = long unsigned int]: Assertion `this->has_value ()' failed.
+
+ The binary contains DWARF 4 debug info and includes a pre-standard
+ (pre-DWARF 5) .debug_macro section. The CU doesn't have a
+ DW_AT_str_offsets_base attribute (which doesn't exist in DWARF 4). The
+ field dwarf2_cu::str_offsets_base is therefore empty. At
+ dwarf2/read.c:24138, we unconditionally read the value in the optional,
+ which triggers the assertion shown above.
+
+ The same thing happens when building the test program with DWARF 5 with
+ the same gcc compiler, as that version of gcc doesn't use indirect
+ string forms, even with DWARF 5. So it still doesn't add a
+ DW_AT_str_offsets_base attribute on the CU.
+
+ Fix that by propagating down a gdb::optional<ULONGEST> for the str
+ offsets base instead of ULONGEST. That value is only used in
+ dwarf_decode_macro_bytes, when encountering an "strx" macro operation
+ (DW_MACRO_define_strx or DW_MACRO_undef_strx). Add a check there that
+ we indeed have a value in the optional before reading it. This is
+ unlikely to happen, but could happen in theory with an erroneous file
+ that uses DW_MACRO_define_strx but does not provide a
+ DW_AT_str_offsets_base (in practice, some things would probably have
+ failed before and stopped processing of debug info). I tested the
+ complaint by inverting the condition and using a clang-compiled binary,
+ which uses the strx operators. This is the result:
+
+ During symbol reading: use of DW_MACRO_define_strx with unknown string offsets base [in module /home/simark/build/binutils-gdb/gdb/testsuite/outputs/gdb.base/info-macros/info-macros]
+
+ The test now passes cleanly with the setup mentioned above, and the
+ testsuite looks on par with how it was before 4d7188abfdf2.
+
+ Change-Id: I7ebd2724beb7b9b4178872374c2a177aea696e77
+
+2021-08-04 Simon Marchi <simon.marchi@polymtl.ca>
+
+ gdb: fix typo in complaint in dwarf2/macro.c
+ I saw this complaint when my code had some bug, and spotted the typo.
+ Fix it, and while at it mention DW_MACRO as well (it would be confusing
+ to only see DW_MACINFO with a file that uses a DWARF 5 .debug_macro
+ section). I contemplated the idea of passing the knowledge of whether
+ we are dealing with a .debug_macro section or .debug_macinfo section, to
+ print only the right one. But in the end, I don't think that trouble is
+ necessary for a complaint nobody is going to see.
+
+ Change-Id: I276ce8da65c3eac5304f64a1e246358ed29cdbbc
+
+2021-08-04 Simon Marchi <simon.marchi@polymtl.ca>
+
+ gdb: fix warnings in bsd-kvm.c
+ Building on OpenBSD, I get warnings like:
+
+ CXX bsd-kvm.o
+ /home/simark/src/binutils-gdb/gdb/bsd-kvm.c:241:18: error: ISO C++11 does not allow conversion from string literal to 'char *' [-Werror,-Wwritable-strings]
+ nl[0].n_name = "_dumppcb";
+ ^
+
+ Silence those by adding casts.
+
+ Change-Id: I2bef4eebcc306762a4e3e5b5c52f67ecf2820503
+
+2021-08-04 Andreas Krebbel <krebbel@linux.ibm.com>
+
+ IBM Z: Remove lpswey parameter
+ opcodes/
+ * s390-opc.c (INSTR_SIY_RD): New instruction format.
+ (MASK_SIY_RD): New instruction mask.
+ * s390-opc.txt: Change instruction format of lpswey to SIY_RD.
+
+ gas/
+ * testsuite/gas/s390/zarch-arch14.d: Remove last operand of
+ lpswey.
+ * testsuite/gas/s390/zarch-arch14.s: Likewise.
+
+2021-08-04 Alan Modra <amodra@gmail.com>
+
+ PR28162, segment fault in mips_elf_assign_gp
+ For the testcase in the PR, _bfd_mips_elf32_gprel16_reloc is passed a
+ NULL output_bfd. As expected for reloc special functions if called by
+ objdump or when final linking. The function attempts to find the
+ output by
+ output_bfd = symbol->section->output_section->owner;
+ That makes some sense, since when handling a gp-relative reloc we need
+ the relevant gp to which the symbol is relative. Possibly the gp
+ value can be one for a shared library? But that doesn't seem useful
+ or supported by the various abi docs and won't work as written.
+ Symbols defined in shared libraries have section->output_section
+ NULL, and what's more the code in mips_elf_assign_gp isn't set up to
+ look at shared library symbols.
+
+ Also, if the symbol is a SHN_ABS one the owner of *ABS* section is
+ NULL, which will result in the testcase segfault. The only gp to
+ which an absolute symbol can be relative is the linker output bfd when
+ linking, or the input bfd when not. This patch arranges to do that
+ for all gp-relative reloc symbols.
+
+ * elf32-mips.c (_bfd_mips_elf32_gprel16_reloc): Don't use the
+ section symbol to find the output bfd, use input_section.
+ (mips_elf_gprel32_reloc, mips16_gprel_reloc): Likewise.
+ * elf64-mips.c (mips_elf64_gprel16_reloc): Likewise.
+ (mips_elf64_literal_reloc, mips_elf64_gprel32_reloc): Likewise.
+ (mips16_gprel_reloc): Likewise.
+
+2021-08-04 Tom de Vries <tdevries@suse.de>
+
+ [gdb/symtab] Use lambda function instead of addrmap_foreach_check
+ Use a lambda function instead of addrmap_foreach_check,
+ which removes the need for static variables.
+
+ Also remove unnecessary static on local var temp_obstack in test_addrmap.
+
+ gdb/ChangeLog:
+
+ 2021-08-04 Tom de Vries <tdevries@suse.de>
+
+ * addrmap.c (addrmap_foreach_check): Remove.
+ (array, val1, val2): Move ...
+ (test_addrmap): ... here. Remove static on temp_obstack. Use lambda
+ function instead of addrmap_foreach_check.
+
+2021-08-04 H.J. Lu <hjl.tools@gmail.com>
+
+ elf: Treat undefined version as hidden
+ Since undefined version can't be used to resolve any references without
+ the original definition, treat it as hidden.
+
+ bfd/
+
+ PR binutils/28158
+ * elf.c (_bfd_elf_get_symbol_version_string): Treat undefined
+ version as hidden.
+
+ ld/
+
+ PR binutils/28158
+ * testsuite/ld-elf/linux-x86.exp: Run PR binutils/28158 tests.
+ * testsuite/ld-elf/pr28158-1.c: New file.
+ * testsuite/ld-elf/pr28158-2.S: Likewise.
+ * testsuite/ld-elf/pr28158.nd: Likewise.
+ * testsuite/ld-elf/pr28158.rd: Likewise.
+ * testsuite/ld-elf/pr28158.t: Likewise.
+ * testsuite/ld-elfvers/vers2.dsym: Updated.
+ * testsuite/ld-elfvers/vers3.dsym: Likewise.
+ * testsuite/ld-elfvers/vers6.dsym: Likewise.
+ * testsuite/ld-elfvers/vers19.dsym: Likewise.
+ * testsuite/ld-elfvers/vers22.dsym: Likewise.
+ * testsuite/ld-elfvers/vers23.dsym: Likewise.
+ * testsuite/ld-elfvers/vers23d.dsym: Likewise.
+ * testsuite/ld-elfvers/vers27d4.dsym: Likewise.
+ * testsuite/ld-elfvers/vers28c.dsym: Likewise.
+
+2021-08-04 Tom de Vries <tdevries@suse.de>
+
+ [gdb/symtab] Implement addrmap_mutable_find
+ Currently addrmap_mutable_find is not implemented:
+ ...
+ static void *
+ addrmap_mutable_find (struct addrmap *self, CORE_ADDR addr)
+ {
+ /* Not needed yet. */
+ internal_error (__FILE__, __LINE__,
+ _("addrmap_find is not implemented yet "
+ "for mutable addrmaps"));
+ }
+ ...
+
+ I implemented this because I needed it during debugging, to be able to do:
+ ...
+ (gdb) p ((dwarf2_psymtab *)addrmap_find (map, addr))->filename
+ ...
+ before and after a call to addrmap_set_empty.
+
+ Since this is not used otherwise, added addrmap unit test.
+
+ Build on x86_64-linux, tested by doing:
+ ...
+ $ gdb -q -batch -ex "maint selftest addrmap"
+ Running selftest addrmap.
+ Ran 1 unit tests, 0 failed
+ ...
+
+ gdb/ChangeLog:
+
+ 2021-08-03 Tom de Vries <tdevries@suse.de>
+
+ * gdb/addrmap.c (addrmap_mutable_find): Implement
+ [GDB_SELF_TESTS] (CHECK_ADDRMAP_FIND): New macro.
+ [GDB_SELF_TESTS] (core_addr, addrmap_foreach_check, test_addrmap)
+ (_initialize_addrmap): New function.
+
+2021-08-04 Clément Chigot <clement.chigot@atos.net>
+
+ gas: correctly output XCOFF tbss symbols with XTY_CM type.
+ Global tbss symbols weren't correctly handled and were generating
+ a symbol with XTY_SD instead of XTY_CM as expected.
+
+ gas/
+ * config/tc-ppc.c (ppc_frog_symbol): Generate a XTY_CM when
+ a symbol has a storage class of XMC_UL.
+
+2021-08-04 Clément Chigot <clement.chigot@atos.net>
+
+ gas: always add dummy symbols when creating XCOFF sections.
+ Most of the algorithms for XCOFF in tc-ppc.c assume that
+ the csects field of a ppc_xcoff_section isn't NULL.
+ This was already made for most of the sections with the creation
+ of a dummy symbol.
+ This patch simply mades it default when creating a xcoff_section.
+
+ gas/
+ * config/tc-ppc.c (ppc_init_xcoff_section): Always create
+ the dummy symbol.
+ (md_begin): Adjust ppc_init_xcoff_section call.
+ (ppc_comm): Likewise.
+ (ppc_change_csect): Likewise.
+
+2021-08-04 Alan Modra <amodra@gmail.com>
+
+ PR28156, rename.c doesn't compile with MinGW
+ Guard against lack of struct timespec definition.
+
+ PR 28156
+ * rename.c (get_stat_atime, get_stat_mtime): Don't compile
+ unless HAVE_UTIMENSAT is defined.
+
+2021-08-04 Alan Modra <amodra@gmail.com>
+
+ PR28155, Superfluous "the" in the man page
+ PR 28155
+ * ld.texi (Options <runtime library name>): Correct grammar.
+
+ revise PE IMAGE_SCN_LNK_NRELOC_OVFL test
+ * coffcode.h (coff_set_alignment_hook): Test that the resulting
+ reloc count is not less than 0xffff.
+
+2021-08-04 Simon Marchi <simon.marchi@polymtl.ca>
+
+ gdb: follow-fork: push target and add thread in target_follow_fork
+ In the context of ROCm-gdb [1], the ROCm target sits on top of the
+ linux-nat target. when a process forks, it needs to carry over some
+ data from the forking inferior to the fork child inferior. Ideally, the
+ ROCm target would implement the follow_fork target_ops method, but there
+ are some small problems. This patch fixes these, which helps the ROCm
+ target, but also makes things more consistent and a bit nicer in
+ general, I believe.
+
+ The main problem is: when follow-fork-mode is "parent",
+ target_follow_fork is called with the parent as the current inferior.
+ When it's "child", target_follow_fork is called with the child as the
+ current inferior. This means that target_follow_fork is sometimes
+ called on the parent's target stack and sometimes on the child's target
+ stack.
+
+ The parent's target stack may contain targets above the process target,
+ such as the ROCm target. So if follow-fork-child is "parent", the ROCm
+ target would get notified of the fork and do whatever is needed. But
+ the child's target stack, at that moment, only contains the exec and
+ process target copied over from the parent. The child's target stack is
+ set up by follow_fork_inferior, before calling target_follow_fork. In
+ that case, the ROCm target wouldn't get notified of the fork.
+
+ For consistency, I think it would be good to always call
+ target_follow_fork on the parent inferior's target stack. I think it
+ makes sense as a way to indicate "this inferior has called fork, do
+ whatever is needed". The desired outcome of the fork (whether an
+ inferior is created for the child, do we need to detach from the child)
+ can be indicated by passed parameter.
+
+ I therefore propose these changes:
+
+ - make follow_fork_inferior always call target_follow_fork with the
+ parent as the current inferior. That lets all targets present on the
+ parent's target stack do some fork-related handling and push
+ themselves on the fork child's target stack if needed.
+
+ For this purpose, pass the child inferior down to target_follow_fork
+ and follow_fork implementations. This is nullptr if no inferior is
+ created for the child, because we want to detach from it.
+
+ - as a result, in follow_fork_inferior, detach from the parent inferior
+ (if needed) only after the target_follow_fork call. This is needed
+ because we want to call target_follow_fork before the parent's
+ target stack is torn down.
+
+ - hand over to the targets in the parent's target stack (including the
+ process target) the responsibility to push themselves, if needed, to
+ the child's target stack. Also hand over the responsibility to the
+ process target, at the same time, to create the child's initial
+ thread (just like we do for follow_exec).
+
+ - pass the child inferior to exec_on_vfork, so we don't need to swap
+ the current inferior between parent and child. Nothing in
+ exec_on_vfork depends on the current inferior, after this change.
+
+ Although this could perhaps be replaced with just having the exec
+ target implement follow_fork and push itself in the child's target
+ stack, like the process target does... We would just need to make
+ sure the process target calls beneath()->follow_fork(...). I'm not
+ sure about this one.
+
+ gdb/ChangeLog:
+
+ * target.h (struct target_ops) <follow_fork>: Add inferior*
+ parameter.
+ (target_follow_fork): Likewise.
+ * target.c (default_follow_fork): Likewise.
+ (target_follow_fork): Likewise.
+ * fbsd-nat.h (class fbsd_nat_target) <follow_fork>: Likewise.
+ (fbsd_nat_target::follow_fork): Likewise, and call
+ inf_ptrace_target::follow_fork.
+ * linux-nat.h (class linux_nat_target) <follow_fork>: Likewise.
+ * linux-nat.c (linux_nat_target::follow_fork): Likewise, and
+ call inf_ptrace_target::follow_fork.
+ * obsd-nat.h (obsd_nat_target) <follow_fork>: Likewise.
+ * obsd-nat.c (obsd_nat_target::follow_fork): Likewise, and call
+ inf_ptrace_target::follow_fork.
+ * remote.c (class remote_target) <follow_fork>: Likewise.
+ (remote_target::follow_fork): Likewise, and call
+ process_stratum_target::follow_fork.
+ * process-stratum-target.h (class process_stratum_target)
+ <follow_fork>: New.
+ * process-stratum-target.c
+ (process_stratum_target::follow_fork): New.
+ * target-delegates.c: Re-generate.
+
+ [1] https://github.com/ROCm-Developer-Tools/ROCgdb
+
+ Change-Id: I460bd0af850f0485e8aed4b24c6d8262a4c69929
+
+2021-08-04 GDB Administrator <gdbadmin@sourceware.org>
+
+ Automatic date update in version.in
+
+2021-08-03 Carl Love <cel@us.ibm.com>
+
+ Fixes for mi-fortran-modules.exp fixes
+ Output has additional information for a given filename.
+
+ gdb/testsuite/ChangeLog
+ * gdb.mi/mi-fortran-modules.exp (system_modules_pattern,
+ system_module_symbols_pattern): Add check for additional symbols
+ on the line
+
+2021-08-03 Simon Marchi <simon.marchi@polymtl.ca>
+
+ gdbsupport: add debug assertions in gdb::optional::get
+ The libstdc++ version of optional contains some runtime checks enabled
+ when _GLIBCXX_DEBUG is defined. I think it would be useful if our
+ version contained similar checks.
+
+ Add checks in the two `get` methods, also conditional on _GLIBCXX_DEBUG.
+ I think it's simpler to use that macro rather than introducing a new
+ GDB-specific one, as I think that if somebody is interested in enabling
+ these runtime checks, they'll also be interested in enabling the
+ libstdc++ runtime checks (and vice-versa).
+
+ I implemented these checks using gdb_assert. Note that gdb_assert
+ throws (after querying the user), and we are in noexcept methods. That
+ means that std::terminate / abort will immediately be called. I think
+ this is ok, since if those were "real" _GLIBCXX_DEBUG checks, abort
+ would be called straight away.
+
+ If I add a dummy failure, it looks like so:
+
+ $ ./gdb -q -nx --data-directory=data-directory
+ /home/simark/src/binutils-gdb/gdb/../gdbsupport/gdb_optional.h:206: internal-error: T& gdb::optional<T>::get() [with T = int]: Assertion `this->has_value ()' failed.
+ A problem internal to GDB has been detected,
+ further debugging may prove unreliable.
+ Quit this debugging session? (y or n) n
+ [1] 658767 abort (core dumped) ./gdb -q -nx --data-directory=data-directory
+
+ Change-Id: Iadfdcd131425bd2ca6a2de30d7b22e9b3cc67793
+
+2021-08-03 Alok Kumar Sharma <AlokKumar.Sharma@amd.com>
+
+ [gdb/testsuite] templates.exp to accept clang++ output
+ Please consider below testcase with intended error.
+ ``````````
+ constexpr const char cstring[] = "Eta";
+ template <const char*, typename T> class Column {};
+ using quick = Column<cstring,double>; // cstring without '&'
+
+ void lookup() {
+ quick c1;
+ c1.ls();
+ }
+ ``````````
+ It produces below error.
+ ``````````
+ no member named 'ls' in 'Column<&cstring, double>'.
+ ``````````
+ Please note that error message contains '&' for cstring, which is absent
+ in actual program.
+ Clang++ does not generate & in such cases and this should also be
+ accepted as correct output.
+
+ gdb/testsuite/ChangeLog:
+
+ * gdb.cp/templates.exp: Accept different but correct output
+ from the Clang++ compiled binary also.
+
+2021-08-03 GDB Administrator <gdbadmin@sourceware.org>
+
+ Automatic date update in version.in
+
+2021-08-02 Tom Tromey <tromey@adacore.com>
+
+ Handle compiler-generated suffixes in Ada names
+ The compiler may add a suffix to a mangled name. A typical example
+ would be splitting a function and creating a ".cold" variant.
+
+ This patch changes Ada decoding (aka demangling) to handle these
+ suffixes. It also changes the encoding process to handle them as
+ well.
+
+ A symbol like "function.cold" will now be displayed to the user as
+ "function[cold]". The "." is not simply preserved because that is
+ already used in Ada.
+
+2021-08-02 Tom Tromey <tromey@adacore.com>
+
+ Remove uses of fprintf_symbol_filtered
+ I believe that many calls to fprintf_symbol_filtered are incorrect.
+ In particular, there are some that pass a symbol's print name, like:
+
+ fprintf_symbol_filtered (gdb_stdout, sym->print_name (),
+ current_language->la_language, DMGL_ANSI);
+
+ fprintf_symbol_filtered uses the "demangle" global to decide whether
+ or not to demangle -- but print_name does this as well. This can lead
+ to double-demangling. Normally this could be innocuous, except I also
+ plan to change Ada demangling in a way that causes this to fail.
+
+2021-08-02 Tom Tromey <tromey@adacore.com>
+
+ Handle type qualifier for enumeration name
+ Pierre-Marie noticed that the Ada expression "TYPE'(NAME)" resolved
+ incorrectly when "TYPE" was an enumeration type. Here, "NAME" should
+ be unambiguous.
+
+ This patch fixes this problem. Note that the patch is not perfect --
+ it does not give an error if TYPE is an enumeration type but NAME is
+ not an enumerator but does have some other meaning in scope. Fixing
+ this proved difficult, and so I've left it out.
+
+2021-08-02 Tom Tromey <tromey@adacore.com>
+
+ Remove the type_qualifier global
+ The type_qualifier global is no longer needed in the Ada expression
+ parser, so this removes it.
+
+2021-08-02 Tom Tromey <tromey@adacore.com>
+
+ Defer Ada character literal resolution
+ In Ada, an enumeration type can use a character literal as one of the
+ enumerators. The Ada expression parser handles the appropriate
+ conversion.
+
+ It turns out, though, that this conversion was handled incorrectly.
+ For an expression like TYPE'(EXP), the conversion would be done for
+ any such literal appearing in EXP -- but only the outermost such
+ expression should really be affected.
+
+ This patch defers the conversion until the resolution phase, fixing
+ the bug.
+
+2021-08-02 Tom Tromey <tromey@adacore.com>
+
+ Refactor Ada resolution
+ In a subsequent patch, it will be convenient if an Ada expression
+ operation can supply its own replacement object. This patch refactors
+ Ada expression resolution to make this possible.
+
+ Remove add_symbols_from_enclosing_procs
+ I noticed that add_symbols_from_enclosing_procs is empty, and can be
+ removed. The one caller, ada_add_local_symbols, can also be
+ simplified, removing some code that, I think, was an incorrect attempt
+ to handle nested functions.
+
+2021-08-02 Tom Tromey <tromey@adacore.com>
+
+ Avoid crash in varobj deletion
+ PR varobj/28131 points out a crash in the varobj deletion code. It
+ took a while to reproduce this, but essentially what happens is that a
+ top-level varobj deletes its root object, then deletes the "dynamic"
+ object. However, deletion of the dynamic object may cause
+ ~py_varobj_iter to run, which in turn uses gdbpy_enter_varobj:
+
+ gdbpy_enter_varobj::gdbpy_enter_varobj (const struct varobj *var)
+ : gdbpy_enter (var->root->exp->gdbarch, var->root->exp->language_defn)
+ {
+ }
+
+ However, because var->root has already been destroyed, this is
+ invalid.
+
+ I've added a new test case. This doesn't reliably crash, but the
+ problem can easily be seen under valgrind (and, I presume, with ASAN,
+ though I did not try this).
+
+ Tested on x86-64 Fedora 32. I also propose putting this on the GDB 11
+ branch, with a suitable ChangeLog entry of course.
+
+ Bug: https://sourceware.org/bugzilla/show_bug.cgi?id=28131
+
+2021-08-02 Tom de Vries <tdevries@suse.de>
+
+ [gdb/testsuite] Fix gdb.dwarf2/dw2-using-debug-str.exp with cc-with-dwz-m
+ When running with target board cc-with-dwz-m, we run into:
+ ...
+ (gdb) file dw2-using-debug-str-no-debug-str^M
+ Reading symbols from dw2-using-debug-str-no-debug-str...^M
+ (gdb) FAIL: gdb.dwarf2/dw2-using-debug-str.exp: file dw2-using-debug-str
+ ...
+
+ With native, the .debug_str section is present in the
+ dw2-using-debug-str executable, and removed from the
+ dw2-using-debug-str-no-debug-str executable. When loading the latter, a dwarf
+ error is triggered.
+
+ With cc-with-dwz-m, the .debug_str section is not present in the
+ dw2-using-debug-str executable, because it's already moved to
+ .tmp/dw2-using-debug-str.dwz. Consequently, the removal has no effect, and no
+ dwarf error is triggered, which causes the FAIL.
+
+ The same problem arises with target board cc-with-gnu-debuglink.
+
+ Fix this by detecting whether the .debug_str section is missing, and skipping
+ the remainder of the test-case.
+
+ Tested on x86_64-linux.
+
+ gdb/testsuite/ChangeLog:
+
+ 2021-08-02 Tom de Vries <tdevries@suse.de>
+
+ * gdb.dwarf2/dw2-using-debug-str.exp: Handle missing .debug_str
+ section in dw2-using-debug-str.
+
+2021-08-02 Tom de Vries <tdevries@suse.de>
+
+ [gdb/testsuite] Fix gdb.dwarf2/dw2-using-debug-str.exp with cc-with-gdb-index
+ When running with target board cc-with-gdb-index, we run into:
+ ...
+ (gdb) file dw2-using-debug-str-no-debug-str^M
+ Reading symbols from dw2-using-debug-str-no-debug-str...^M
+ Dwarf Error: DW_FORM_strp used without required section^M
+ (gdb) FAIL: gdb.dwarf2/dw2-using-debug-str.exp: file dw2-using-debug-str
+ ...
+
+ The test expects the dwarf error, but has no matching pattern for the entire
+ output.
+
+ Fix this by updating the regexp.
+
+ Tested on x86_64-linux.
+
+ gdb/testsuite/ChangeLog:
+
+ 2021-08-02 Tom de Vries <tdevries@suse.de>
+
+ * gdb.dwarf2/dw2-using-debug-str.exp: Update regexp to match
+ cc-with-gdb-index output.
+
+2021-08-02 Tom de Vries <tdevries@suse.de>
+
+ [gdb/testsuite] Fix gdb.dwarf2/per-bfd-sharing.exp with cc-with-gdb-index
+ When running with target board cc-with-gdb-index, we run into:
+ ...
+ rm: cannot remove '/tmp/tmp.JmYTeiuFjj/*.gdb-index': \
+ No such file or directory^M
+ FAIL: gdb.dwarf2/per-bfd-sharing.exp: \
+ couldn't remove files in temporary cache dir
+ ...
+
+ Fix this, as in gdb.base/index-cache.exp, by only FAILing when
+ $expecting_index_cache_use.
+
+ Tested on x86_64-linux.
+
+ gdb/testsuite/ChangeLog:
+
+ 2021-08-02 Tom de Vries <tdevries@suse.de>
+
+ * gdb.dwarf2/per-bfd-sharing.exp: Only expect index-cache files
+ when $expecting_index_cache_use.
+
+2021-08-02 Tom de Vries <tdevries@suse.de>
+
+ [gdb/testsuite] Fix gdb.dwarf2/gdb-index-nodebug.exp with cc-with-gdb-index
+ When running with target board cc-with-gdb-index, we run into:
+ ...
+ (gdb) save gdb-index .^M
+ Error while writing index for `gdb-index-nodebug': \
+ Cannot use an index to create the index^M
+ (gdb) FAIL: gdb.dwarf2/gdb-index-nodebug.exp: try to save gdb index
+ ...
+
+ Fix this by detecting an already present index, and marking the test
+ unsupported.
+
+ Tested on x86_64-linux.
+
+ gdb/testsuite/ChangeLog:
+
+ 2021-08-02 Tom de Vries <tdevries@suse.de>
+
+ * gdb.dwarf2/gdb-index-nodebug.exp: Mark unsupported when index
+ already present.
+
+2021-08-02 Tom de Vries <tdevries@suse.de>
+
+ [gdb/testsuite] Fix gdb.dwarf2/fission-relative-dwo.exp with cc-with-gdb-index
+ When running with target board cc-with-gdb-index, we run into:
+ ...
+ gdb compile failed, warning: Could not find DWO CU \
+ fission-relative-dwo.dwo(0x1234) referenced by CU at offset 0xc7 \
+ [in module outputs/gdb.dwarf2/fission-relative-dwo/.tmp/fission-relative-dwo]
+ UNTESTED: gdb.dwarf2/fission-relative-dwo.exp: fission-relative-dwo.exp
+ ERROR: failed to compile fission-relative-dwo
+ ...
+
+ The problem is that:
+ - the .dwo file is found relative to the executable, and
+ - cc-with-tweaks.sh moves the executable to a temp dir, but not
+ the .dwo file.
+
+ Fix this by copying the .dwo file alongside the executable in the temp dir.
+
+ Verified changes using shellcheck.
+
+ Tested on x86_64-linux.
+
+ gdb/ChangeLog:
+
+ 2021-08-02 Tom de Vries <tdevries@suse.de>
+
+ * contrib/cc-with-tweaks.sh: Copy .dwo files alongside executable.
+
+2021-08-02 Shahab Vahedi <shahab@synopsys.com>
+
+ gdb: Make the builtin "boolean" type an unsigned type
+ When printing the fields of a register that is of a custom struct type,
+ the "unpack_bits_as_long ()" function is used:
+
+ do_val_print (...)
+ cp_print_value_fields (...)
+ value_field_bitfield (...)
+ unpack_value_bitfield (...)
+ unpack_bits_as_long (...)
+
+ This function may sign-extend the extracted field while returning it:
+
+ val >>= lsbcount;
+
+ if (...)
+ {
+ valmask = (((ULONGEST) 1) << bitsize) - 1;
+ val &= valmask;
+ if (!field_type->is_unsigned ())
+ if (val & (valmask ^ (valmask >> 1)))
+ val |= ~valmask;
+ }
+
+ return val;
+
+ lsbcount: Number of lower bits to get rid of.
+ bitsize: The bit length of the field to be extracted.
+ val: The register value.
+ field_type: The type of field that is being handled.
+
+ While the logic here is correct, there is a problem when it is
+ handling "field_type"s of "boolean". Those types are NOT marked
+ as "unsigned" and therefore they end up being sign extended.
+ Although this is not a problem for "false" (0), it definitely
+ causes trouble for "true".
+
+ This patch constructs the builtin boolean type as such that it is
+ marked as an "unsigned" entity.
+
+ The issue tackled here was first encountered for arc-elf32 target
+ running on an x86_64 machine. The unit-test introduced in this change
+ has passed for all the targets (--enable-targets=all) running on the
+ same x86_64 host.
+
+ Fixes: https://sourceware.org/PR28104
+
+2021-08-02 GDB Administrator <gdbadmin@sourceware.org>
+
+ Automatic date update in version.in
+
+2021-08-01 Tom de Vries <tdevries@suse.de>
+
+ [gdb/testsuite] Fix gdb.base/maint.exp with cc-with-gdb-index
+ With target board cc-with-gdb-index we run into:
+ ...
+ FAIL: gdb.base/maint.exp: maint print statistics
+ ...
+
+ The output that is checked is:
+ ...
+ Statistics for 'maint':^M
+ Number of "minimal" symbols read: 53^M
+ Number of "full" symbols read: 40^M
+ Number of "types" defined: 60^M
+ Number of symbol tables: 7^M
+ Number of symbol tables with line tables: 2^M
+ Number of symbol tables with blockvectors: 2^M
+ Number of read CUs: 2^M
+ Number of unread CUs: 5^M
+ Total memory used for objfile obstack: 20320^M
+ Total memory used for BFD obstack: 4064^M
+ Total memory used for string cache: 4064^M
+ ...
+ and the regexp doesn't match because it expects the "Number of read/unread
+ CUs" lines in a different place.
+
+ Fix this by updating the regexp.
+
+ Tested on x86_64-linux.
+
+ gdb/testsuite/ChangeLog:
+
+ 2021-08-01 Tom de Vries <tdevries@suse.de>
+
+ * gdb.base/maint.exp: Update "maint print statistics" to match
+ output with target board cc-with-gdb-index.
+
+2021-08-01 Tom de Vries <tdevries@suse.de>
+
+ [gdb/testsuite] Fix gdb.base/index-cache.exp with cc-with-gdb-index
+ With target board cc-with-gdb-index we run into:
+ ...
+ FAIL: gdb.base/index-cache.exp: couldn't remove files in temporary cache dir
+ ...
+
+ The problem is that there are no files to remove, because the index cache
+ isn't used, as indicated by $expecting_index_cache_use.
+
+ Fix this by only FAILing when $expecting_index_cache_use.
+
+ Tested on x86_64-linux.
+
+ gdb/testsuite/ChangeLog:
+
+ 2021-08-01 Tom de Vries <tdevries@suse.de>
+
+ * gdb.base/index-cache.exp:
+
+2021-08-01 GDB Administrator <gdbadmin@sourceware.org>
+
+ Automatic date update in version.in
+
+2021-07-31 GDB Administrator <gdbadmin@sourceware.org>
+
+ Automatic date update in version.in
+
+2021-07-30 Tom Tromey <tom@tromey.com>
+
+ Use iterator_range in more places
+ This changes a couple of spots to replace custom iterator range
+ classes with a specialization of iterator_range.
+
+ Regression tested on x86-64 Fedora 34.
+
+2021-07-30 Tom Tromey <tom@tromey.com>
+
+ Replace exception_print_same with operator!=
+ I noticed that exception_print_same is only used in a single spot, and
+ it seemed to be better as an operator!= method attached to
+ gdb_exception.
+
+ Regression tested on x86-64 Fedora 34.
+
+2021-07-30 Tom de Vries <tdevries@suse.de>
+
+ [gdb/build] Disable attribute nonnull
+ With trunk gcc (12.0) we're running into a -Werror=nonnull-compare build
+ breaker in gdb, which caused a broader review of the usage of the nonnull
+ attribute.
+
+ The current conclusion is that it's best to disable this. This is explained
+ at length in the gdbsupport/common-defs.h comment.
+
+ Tested by building with trunk gcc.
+
+ gdb/ChangeLog:
+
+ 2021-07-29 Tom de Vries <tdevries@suse.de>
+
+ * gdbsupport/common-defs.h (ATTRIBUTE_NONNULL): Disable.
+
+2021-07-30 Clément Chigot <clement.chigot@atos.net>
+
+ gas: ensure XCOFF DWARF subsection are initialized to 0
+ debug_abbrev doesn't use end_exp to compute its size. However, it must
+ be NULL. Otherwise, ppc_xcoff_end might try to access uninitialized
+ memory.
+
+ gas/
+ * config/tc-ppc.c (ppc_dwsect): Use XCNEW instead of XNEW when creating
+ a new subsection.
+
+2021-07-30 Clément Chigot <clement.chigot@atos.net>
+
+ bfd: ensure that symbols targeted by DWARF relocations are kept in XCOFF
+ This patch improves XCOFF garbage collector pass, in order to keep
+ symbols being referenced only by special sections like DWARF sections.
+
+ bfd/
+ * xcofflink.c (xcoff_mark): Replace SEC_MARK by gc_mark.
+ Look through relocations even if xcoff_section_data is NULL.
+ (xcoff_sweep): Check if any sections of a file is kept before
+ adding its special sections.
+ Call xcoff_mark for special sessions being kept instead of just
+ marking them.
+ (SEC_MARK): Remove
+ (xcoff_mark_symbol): Replace SEC_MARK by gc_mark.
+ (xcoff_keep_symbol_p): Likewise.
+ (bfd_xcoff_size_dynamic_sections): Likewise.
+ (xcoff_find_tc0): Likewise.
+
+2021-07-30 Clément Chigot <clement.chigot@atos.net>
+
+ bfd: avoid a crash when debug_section isn't created in XCOFF
+ bfd/
+ * xcofflink.c (bfd_xcoff_size_dynamic_sections):
+ Add check to know if debug_section is initialized.
+
+2021-07-30 Alan Modra <amodra@gmail.com>
+
+ readelf: catch archive_file_size of -1
+ Fuzzers might put -1 in arhdr.ar_size. If the size is rounded up to
+ and even number of bytes we get zero.
+
+ * readelf.c (process_archive): Don't round up archive_file_size.
+ Do round up next_arhdr_offset calculation.
+
+2021-07-30 Alan Modra <amodra@gmail.com>
+
+ reloc_upper_bound size calculations
+ Section reloc_count is an unsigned int. Adding one for a NULL
+ terminator to an array of arelent pointers can wrap the count to
+ zero. Avoid that by doing the addition as longs.
+
+ * coffgen.c (coff_get_reloc_upper_bound): Don't overflow unsigned
+ int expression.
+ * elf.c (_bfd_elf_get_reloc_upper_bound): Likewise.
+ * elf64-sparc.c (elf64_sparc_get_reloc_upper_bound): Likewise.
+ * mach-o.c (bfd_mach_o_get_reloc_upper_bound): Likewise.
+ * vms-alpha.c (alpha_vms_get_reloc_upper_bound): Likewise.
+
+2021-07-30 Alan Modra <amodra@gmail.com>
+
+ Sanity check _bfd_coff_read_string_table
+ * coffgen.c (_bfd_coff_read_string_table): Catch overflows
+ when calculating string table file location.
+
+2021-07-30 Alan Modra <amodra@gmail.com>
+
+ IMAGE_SCN_LNK_NRELOC_OVFL
+ From microsoft docs: It is an error if IMAGE_SCN_LNK_NRELOC_OVFL is
+ set and there are fewer than 0xffff relocations in the section.
+
+ * coffcode.h (coff_set_alignment_hook): Sanity check overflow
+ reloc count.
+
+2021-07-30 Simon Marchi <simon.marchi@polymtl.ca>
+
+ gdb: fix nr_bits gdb_assert in append_flags_type_field
+ The assertion
+
+ gdb_assert (nr_bits >= 1 && nr_bits <= type_bitsize);
+
+ is not correct. Well, it's correct in that we do want the number of
+ bits to be in the range [1, type_bitsize]. But we don't check anywhere
+ that the end of the specified flag is within the containing type.
+
+ The following code should generate a failed assertion, as the flag goes
+ past the 32 bits of the underlying type, but it's currently not caught:
+
+ static void
+ test_print_flag (gdbarch *arch)
+ {
+ type *flags_type = arch_flags_type (arch, "test_type", 32);
+ type *field_type = builtin_type (arch)->builtin_uint32;
+ append_flags_type_field (flags_type, 31, 2, field_type, "invalid");
+ }
+
+ (You can test this by registering it as a selftest using
+ selftests::register_test_foreach_arc and running.)
+
+ Change the assertion to verify that the end bit is within the range of
+ the underlying type. This implicitly verifies that nr_bits is not
+ too big as well, so we don't need a separate assertion for that.
+
+ Change-Id: I9be79e5fd7a5917bf25b03b598727e6274c892e8
+ Co-Authored-By: Tony Tye <Tony.Tye@amd.com>
+
+2021-07-30 GDB Administrator <gdbadmin@sourceware.org>
+
+ Automatic date update in version.in
+
+2021-07-29 John Baldwin <jhb@FreeBSD.org>
+
+ obsd-nat: Report both thread and PID in ::pid_to_str.
+ This improves the output of info threads when debugging multiple
+ inferiors (e.g. after a fork with detach_on_fork disabled).
+
+2021-07-29 John Baldwin <jhb@FreeBSD.org>
+
+ obsd-nat: Various fixes for fork following.
+ - Don't use #ifdef's on ptrace ops. obsd-nat.h didn't include
+ <sys/ptrace.h>, so the virtual methods weren't always overridden
+ causing the fork following to not work. In addition, the thread and
+ fork code is intertwined in ::wait and and the lack of #ifdef's
+ there already assumed both were present. Finally, both of these
+ ptrace ops have been present in OpenBSD for at least 10 years.
+
+ - Move duplicated code to enable PTRACE_FORK event reporting to a
+ single function and invoke it on new child processes reported via
+ PTRACE_FORK.
+
+ - Don't return early from PTRACE_FORK handling, but instead reset
+ wptid to the correct ptid if the child reports its event before the
+ parent. This allows the ptid fixup code to add thread IDs if the
+ first event for a process is a PTRACE_FORK event. This also
+ properly returns ptid's with thread IDs when reporting PTRACE_FORK
+ events.
+
+ - Handle detach_fork by skipping the PT_DETACH.
+
+2021-07-29 John Baldwin <jhb@FreeBSD.org>
+
+ obsd-nat: Various fixes to obsd_nat_target::wait.
+ - Call inf_ptrace_target::wait instead of duplicating the code.
+ Replace a check for WIFSTOPPED on the returned status from waitpid
+ by checking for TARGET_WAITKIND_STOPPED in the parsed status as is
+ done in fbsd_nat_target::wait.
+
+ - Don't use inferior_ptid when deciding if a new process is a child vs
+ parent of the fork. Instead, use find_inferior_pid and assume that
+ if an inferior already exists, the pid in question is the parent;
+ otherwise, the pid is the child.
+
+ - Don't use inferior_ptid when deciding if the ptid of the process
+ needs to be updated with an LWP ID, or if this is a new thread.
+ Instead, use the approach from fbsd-nat which is to check if a ptid
+ without an LWP exists and if so update the ptid of that thread
+ instead of adding a new thread.
+
+2021-07-29 John Baldwin <jhb@FreeBSD.org>
+
+ x86-bsd-nat: Only define gdb_ptrace when using debug registers.
+ This fixes an unused function warning on OpenBSD which does not
+ support PT_GETDBREGS.
+
+2021-07-29 John Baldwin <jhb@FreeBSD.org>
+
+ Don't compile x86 debug register support on OpenBSD.
+ Simon Marchi tried gdb on OpenBSD, and it immediately segfaults when
+ running a program. Simon tracked down the problem to x86_dr_low.get_status
+ being nullptr at this point:
+
+ (lldb) print x86_dr_low.get_status
+ (unsigned long (*)()) $0 = 0x0000000000000000
+ (lldb) bt
+ * thread #1, stop reason = step over
+ * frame #0: 0x0000033b64b764aa gdb`x86_dr_stopped_data_address(state=0x0000033d7162a310, addr_p=0x00007f7ffffc5688) at x86-dregs.c:645:12
+ frame #1: 0x0000033b64b766de gdb`x86_dr_stopped_by_watchpoint(state=0x0000033d7162a310) at x86-dregs.c:687:10
+ frame #2: 0x0000033b64ea5f72 gdb`x86_stopped_by_watchpoint() at x86-nat.c:206:10
+ frame #3: 0x0000033b64637fbb gdb`x86_nat_target<obsd_nat_target>::stopped_by_watchpoint(this=0x0000033b65252820) at x86-nat.h:100:12
+ frame #4: 0x0000033b64d3ff11 gdb`target_stopped_by_watchpoint() at target.c:468:46
+ frame #5: 0x0000033b6469b001 gdb`watchpoints_triggered(ws=0x00007f7ffffc61c8) at breakpoint.c:4790:32
+ frame #6: 0x0000033b64a8bb8b gdb`handle_signal_stop(ecs=0x00007f7ffffc61a0) at infrun.c:6072:29
+ frame #7: 0x0000033b64a7e3a7 gdb`handle_inferior_event(ecs=0x00007f7ffffc61a0) at infrun.c:5694:7
+ frame #8: 0x0000033b64a7c1a0 gdb`fetch_inferior_event() at infrun.c:4090:5
+ frame #9: 0x0000033b64a51921 gdb`inferior_event_handler(event_type=INF_REG_EVENT) at inf-loop.c:41:7
+ frame #10: 0x0000033b64a827c9 gdb`infrun_async_inferior_event_handler(data=0x0000000000000000) at infrun.c:9384:3
+ frame #11: 0x0000033b6465bd4f gdb`check_async_event_handlers() at async-event.c:335:4
+ frame #12: 0x0000033b65070917 gdb`gdb_do_one_event() at event-loop.cc:216:10
+ frame #13: 0x0000033b64af0db1 gdb`start_event_loop() at main.c:421:13
+ frame #14: 0x0000033b64aefe9a gdb`captured_command_loop() at main.c:481:3
+ frame #15: 0x0000033b64aed5c2 gdb`captured_main(data=0x00007f7ffffc6470) at main.c:1353:4
+ frame #16: 0x0000033b64aed4f2 gdb`gdb_main(args=0x00007f7ffffc6470) at main.c:1368:7
+ frame #17: 0x0000033b6459d787 gdb`main(argc=5, argv=0x00007f7ffffc6518) at gdb.c:32:10
+ frame #18: 0x0000033b6459d521 gdb`___start + 321
+
+ On BSDs, get_status is set in _initialize_x86_bsd_nat, but only if
+ HAVE_PT_GETDBREGS is defined. PT_GETDBREGS doesn't exist on OpenBSD, so
+ get_status (and the other fields of x86_dr_low) are left as nullptr.
+
+ OpenBSD doesn't support getting or setting the x86 debug registers, so
+ fix by omitting debug register support entirely on OpenBSD:
+
+ - Change x86bsd_nat_target to only inherit from x86_nat_target if
+ PT_GETDBREGS is supported.
+
+ - Don't include x86-nat.o and nat/x86-dregs.o for OpenBSD/amd64. They
+ were already omitted for OpenBSD/i386.
+
+2021-07-29 Carl Love <cel@us.ibm.com>
+
+ Fix for gdb.tui/tui-layout-asm.exp
+ The width of the window is too narrow to display the entire assembly line.
+ The width of the columns in the window changes as the test walks thru the
+ terminal window output. The column change results in the first and second
+ reads of the same line to differ thus causing the test to fail. Increasing
+ the width of the window keeps the column width consistent thru the test.
+
+ If the test fails, the added check prints an message to the log file if
+ the failure may be due to the window being too narrow.
+
+ gdb/testsuite/ChangeLog
+
+ * gdb.tui/tui-layout-asm.exp: Replace window width of 80 with the
+ tui_asm_window_width variable for the width. Add if
+ count_whitespace check.
+ (count_whitespace): New proc
+
+2021-07-29 George Barrett <bob@bob131.so>
+
+ guile/scm-math: indentation fixes
+ Changes the indenting of a few expressions in
+ vlscm_convert_typed_number to be better in line with the prevailing
+ code style.
+
+ gdb/ChangeLog:
+
+ 2021-07-30 George Barrett <bob@bob131.so>
+
+ * guile/scm-math.c (vlscm_convert_typed_number): Fix the
+ indentation of calls to gdbscm_make_out_of_range_error.
+
+ Change-Id: I7463998b77c17a00e88058e89b52fa029ee40e03
+
+2021-07-29 George Barrett <bob@bob131.so>
+
+ guile: fix make-value with pointer type
+ Calling the `make-value' procedure with an integer value and a pointer
+ type for the #:type argument triggers a failed assertion in
+ `get_unsigned_type_max', as that function doesn't consider pointers to
+ be an unsigned type. This commit fixes the issue by adding a separate
+ code path for pointers.
+
+ As previously suggested, range checking is done using a new helper
+ function in gdbtypes.
+
+ gdb/ChangeLog:
+
+ 2021-07-30 George Barrett <bob@bob131.so>
+
+ * gdbtypes.h (get_pointer_type_max): Add declaration.
+ * gdbtypes.c (get_pointer_type_max): Add definition for new
+ helper function.
+ * guile/scm-math.c (vlscm_convert_typed_number): Add code path
+ for handling conversions to pointer types without failing an
+ assert.
+
+ gdb/testsuite/ChangeLog:
+
+ 2021-07-30 George Barrett <bob@bob131.so>
+
+ * gdb.guile/scm-math.exp (test_value_numeric_ops): Add test
+ for creating pointers with make-value.
+ (test_make_pointer_value, test_pointer_numeric_range): Add
+ test procedures containing checks for integer-to-pointer
+ validation.
+
+ Change-Id: I9994dd1c848840a3d995f745e6d72867732049f0
+
+2021-07-29 George Barrett <bob@bob131.so>
+
+ gdbtypes: return value from get_unsigned_type_max
+ Changes the signature of get_unsigned_type_max to return the computed
+ value rather than returning void and writing the value into a pointer
+ passed by the caller.
+
+ gdb/ChangeLog:
+
+ 2021-07-30 George Barrett <bob@bob131.so>
+
+ * gdbtypes.h (get_unsigned_type_max): Change signature to
+ return the result instead of accepting a pointer argument in
+ which to store the result.
+ * gdbtypes.c (get_unsigned_type_max): Likewise.
+ * guile/scm-math.c (vlscm_convert_typed_number): Update caller
+ of get_unsigned_type_max.
+ (vlscm_integer_fits_p): Likewise.
+
+ Change-Id: Ibb1bf0c0fa181fac7853147dfde082a7d1ae2323
+
+2021-07-29 Clément Chigot <clement.chigot@atos.net>
+
+ gas: improve C_BSTAT and C_STSYM symbols handling on XCOFF
+ A C_BSTAT debug symbol specifies the beginning of a static block.
+ Its n_value is the index of the csect containing static symbols.
+ A C_STSYM debug symbol represents the stabstring of a statically
+ allocated symbol. Its n_value is the offset in the csect pointed
+ by the containing C_BSTAT.
+
+ These two special n_value were not correctly handled both when
+ generating object files with gas or when reading them with objdump.
+ This patch tries to improve that and, above all, to allow gas-generated
+ object files with such symbols to be accepted by AIX ld.
+
+ bfd/
+ * coff-bfd.c (bfd_coff_get_syment): Adjust n_value of symbols
+ having fix_value = 1 in order to be an index and not a memory
+ offset.
+ * coffgen.c (coff_get_symbol_info): Likewize.
+ (coff_print_symbol): Likewize.
+
+ gas/
+ * config/tc-ppc.c (ppc_frob_label): Don't change within if
+ already set.
+ (ppc_stabx): Remove workaround changing exp.X_add_symbol's
+ within.
+ * config/tc-ppc.h (struct ppc_tc_sy): Update comments.
+ * symbols.c (resolve_symbol_value): Remove symbol update
+ when final_val is 0 and it's an AIX debug symbol.
+ * testsuite/gas/ppc/aix.exp: Add new tests.
+ * testsuite/gas/ppc/xcoff-stsym-32.d: New test.
+ * testsuite/gas/ppc/xcoff-stsym-64.d: New test.
+ * testsuite/gas/ppc/xcoff-stsym.s: New test.
+
+2021-07-29 George Barrett <bob@bob131.so>
+
+ Guile: temporary breakpoints
+ Adds API to the Guile bindings for creating temporary breakpoints and
+ querying whether an existing breakpoint object is temporary. This is
+ effectively a transliteration of the Python implementation.
+
+ It's worth noting that the added `is_temporary' flag is ignored in the
+ watchpoint registration path. This replicates the behaviour of the
+ Python implementation, but might be a bit surprising for users.
+
+ gdb/ChangeLog:
+
+ 2021-06-09 George Barrett <bob@bob131.so>
+
+ * guile/scm-breakpoint.c (gdbscm_breakpoint_object::spec): Add
+ is_temporary field.
+ (temporary_keyword): Add keyword object for make-breakpoint
+ argument parsing.
+ (gdbscm_make_breakpoint): Accept #:temporary keyword argument
+ and store the value in the allocated object's
+ spec.is_temporary.
+ (gdbscm_register_breakpoint_x): Pass the breakpoint's
+ spec.is_temporary value to create_breakpoint.
+ (gdbscm_breakpoint_temporary): Add breakpoint-temporary?
+ procedure implementation.
+ (breakpoint_functions::make-breakpoint): Update documentation
+ string and fix a typo.
+ (breakpoint_functions::breakpoint-temporary?): Add
+ breakpoint-temporary? procedure.
+ (gdbscm_initialize_breakpoints): Initialise temporary_keyword
+ variable.
+ NEWS (Guile API): Mention new temporary breakpoints API.
+
+ gdb/doc/ChangeLog:
+
+ 2021-06-09 George Barrett <bob@bob131.so>
+
+ * guile.texi (Breakpoints In Guile): Update make-breakpoint
+ documentation to reflect new #:temporary argument.
+ Add documentation for new breakpoint-temporary? procedure.
+
+ gdb/testsuite/ChangeLog:
+
+ 2021-06-09 George Barrett <bob@bob131.so>
+
+ * gdb.guile/scm-breakpoint.exp: Add additional tests for
+ temporary breakpoints.
+
+ Change-Id: I2de332ee7c256f5591d7141ab3ad50d31b871d17
+
+2021-07-29 GDB Administrator <gdbadmin@sourceware.org>
+
+ Automatic date update in version.in
+
+2021-07-28 Simon Marchi <simon.marchi@polymtl.ca>
+
+ gdb: clean up some things in features/Makefile
+ Clean up some things I noticed:
+
+ - we generate a regformats/microblaze-with-stack-protect.dat file. I
+ don't think this is used. It could be used by a GDBserver built for
+ Microblaze, but GDBserver isn't ported to Microblaze. So I don't
+ think that's used at all. Remove the entry in features/Makefile and
+ the file itself.
+
+ - There are a bunch of *-expedite values in features/Makefile for
+ architectures for which we don't generate dat files. AFAIK, these
+ *-expedite values are only used when generating dat files. Remove
+ those that are not necessary.
+
+ - 32bit-segments.xml is not listed in the Makfile, but it's used. This
+ means that it wouldn't get re-generated if we were to change how C
+ files are generated from the XML. It looks like it was simply
+ forgotten, add it.
+
+ Change-Id: I112d00db317102270e1df924473c37122ccb6c3a
+
+2021-07-28 H.J. Lu <hjl.tools@gmail.com>
+
+ x86: Simplify check for distinct TMM register operands
+ If any pair of operands in AMX instructions with 3 TMM register operands
+ are the same, the instruction will UD. Don't call register_number to
+ check for distinct TMM register operands since all TMM register operands
+ have the same size.
+
+ * config/tc-i386.c (check_VecOperands): Remove register_number
+ call when checking for distinct TMM register operands.
+
+2021-07-28 H.J. Lu <hjl.tools@gmail.com>
+
+ ld: Run tmpdir/pr28138 only for native build
+ * PR ld/28138
+ * testsuite/ld-plugin/lto.exp: Run tmpdir/pr28138 only for
+ native build.
+
+2021-07-28 H.J. Lu <hjl.tools@gmail.com>
+
+ bfd: Close the file descriptor if there is no archive fd
+ Close the file descriptor if there is no archive plugin file descriptor
+ to avoid running out of file descriptors on thin archives with many
+ archive members.
+
+ bfd/
+
+ PR ld/28138
+ * plugin.c (bfd_plugin_close_file_descriptor): Close the file
+ descriptor there is no archive plugin file descriptor.
+
+ ld/
+
+ PR ld/28138
+ * testsuite/ld-plugin/lto.exp: Run ld/28138 tests.
+ * testsuite/ld-plugin/pr28138.c: New file.
+ * testsuite/ld-plugin/pr28138-1.c: Likewise.
+ * testsuite/ld-plugin/pr28138-2.c: Likewise.
+ * testsuite/ld-plugin/pr28138-3.c: Likewise.
+ * testsuite/ld-plugin/pr28138-4.c: Likewise.
+ * testsuite/ld-plugin/pr28138-5.c: Likewise.
+ * testsuite/ld-plugin/pr28138-6.c: Likewise.
+ * testsuite/ld-plugin/pr28138-7.c: Likewise.
+
+2021-07-28 H.J. Lu <hjl.tools@gmail.com>
+
+ ld: Report error reason when a library cannot be found
+ With "ulimit -n 20", report:
+
+ ld: cannot find -lgcc: Too many open files
+
+ instead of
+
+ ld: cannot find -lgcc
+
+ * ldfile.c (ldfile_open_file): Rport error reason when a library
+ cannot be found.
+
+2021-07-28 Sergei Trofimovich <siarheit@google.com>
+
+ texi2pod.pl: add no-op --no-split option support [PR28144]
+ Change 2faf902da ("generate single html manual page by default")
+ added use of --no-split option to makeinfo. binutils reuses
+ makeinfo options for texi2pod.pl wrapper. Unsupported option
+ led to silent manpage truncation.
+
+ The change adds no-op option support.
+
+ etc/
+
+ * texi2pod.pl: Handle no-op --no-split option.
+
+2021-07-28 Andrew Burgess <andrew.burgess@embecosm.com>
+
+ gdb: fix missing space in some info variables output
+ Fixes PR gdb/28121. When a user declares an array like this:
+
+ int * const foo_1[3];
+
+ And in GDB the user does this:
+
+ (gdb) info variables foo
+ All variables matching regular expression "foo":
+
+ File test.c:
+ 1: int * constfoo_1[3];
+
+ Notice the missing space between 'const' and 'foo_1'. This is fixed
+ in c_type_print_varspec_prefix (c-typeprint.c) by passing through the
+ flag that indicates if a trailing space is needed, rather than hard
+ coding the flag to false as we currently do.
+
+ Bug: https://sourceware.org/bugzilla/show_bug.cgi?id=28121
+
+2021-07-28 Tom de Vries <tdevries@suse.de>
+
+ [gdb/symtab] Fix unhandled dwarf expression opcode with gcc-11 -gdwarf-5
+ [ I've confused things by forgetting to add -gdwarf-4 in $subject of
+ commit 0057a7ee0d9 "[gdb/testsuite] Add KFAILs for gdb.ada FAILs with
+ gcc-11". So I'm adding here -gdwarf-5 in $subject, even though -gdwarf-5 is
+ the default for gcc-11. I keep getting confused because of working with a
+ system gcc-11 compiler that was patched to switch the default back to
+ -gdwarf-4. ]
+
+ When running test-case gdb.ada/arrayptr.exp with gcc-11 (and default
+ -gdwarf-5), I run into:
+ ...
+ (gdb) print pa_ptr.all^M
+ Unhandled dwarf expression opcode 0xff^M
+ (gdb) FAIL: gdb.ada/arrayptr.exp: scenario=all: print pa_ptr.all
+ ...
+
+ What happens is that pa_ptr:
+ ...
+ <2><1523>: Abbrev Number: 3 (DW_TAG_variable)
+ <1524> DW_AT_name : pa_ptr
+ <1529> DW_AT_type : <0x14fa>
+ ...
+ has type:
+ ...
+ <2><14fa>: Abbrev Number: 2 (DW_TAG_typedef)
+ <14fb> DW_AT_name : foo__packed_array_ptr
+ <1500> DW_AT_type : <0x1504>
+ <2><1504>: Abbrev Number: 4 (DW_TAG_pointer_type)
+ <1505> DW_AT_byte_size : 8
+ <1505> DW_AT_type : <0x1509>
+ ...
+ which is a pointer to a subrange:
+ ...
+ <2><1509>: Abbrev Number: 12 (DW_TAG_subrange_type)
+ <150a> DW_AT_lower_bound : 0
+ <150b> DW_AT_upper_bound : 0x3fffffffffffffffff
+ <151b> DW_AT_name : foo__packed_array
+ <151f> DW_AT_type : <0x15cc>
+ <1523> DW_AT_artificial : 1
+ <1><15cc>: Abbrev Number: 5 (DW_TAG_base_type)
+ <15cd> DW_AT_byte_size : 16
+ <15ce> DW_AT_encoding : 7 (unsigned)
+ <15cf> DW_AT_name : long_long_long_unsigned
+ <15d3> DW_AT_artificial : 1
+ ...
+ with upper bound of form DW_FORM_data16.
+
+ In gdb/dwarf/attribute.h we have:
+ ...
+ /* Return non-zero if ATTR's value falls in the 'constant' class, or
+ zero otherwise. When this function returns true, you can apply
+ the constant_value method to it.
+ ...
+ DW_FORM_data16 is not considered as constant_value cannot handle
+ that. */
+ bool form_is_constant () const;
+ ...
+ so instead we have attribute::form_is_block (DW_FORM_data16) == true.
+
+ Then in attr_to_dynamic_prop for the upper bound, we get a PROC_LOCEXPR
+ instead of a PROP_CONST and end up trying to evaluate the constant
+ 0x3fffffffffffffffff as if it were a locexpr, which causes the
+ "Unhandled dwarf expression opcode 0xff".
+
+ In contrast, with -gdwarf-4 we have:
+ ...
+ <164c> DW_AT_upper_bound : 18 byte block: \
+ 9e 10 ff ff ff ff ff ff ff ff 3f 0 0 0 0 0 0 0 \
+ (DW_OP_implicit_value 16 byte block: \
+ ff ff ff ff ff ff ff ff 3f 0 0 0 0 0 0 0 )
+ ...
+
+ Fix the dwarf error by translating the DW_FORM_data16 constant into a
+ PROC_LOCEXPR, effectively by prepending 0x9e 0x10, such that we have same
+ result as with -gdwarf-4:
+ ...
+ (gdb) print pa_ptr.all^M
+ That operation is not available on integers of more than 8 bytes.^M
+ (gdb) KFAIL: gdb.ada/arrayptr.exp: scenario=all: print pa_ptr.all \
+ (PRMS: gdb/20991)
+ ...
+
+ Tested on x86_64-linux, with gcc-11 and target board
+ unix/gdb:debug_flags=-gdwarf-5.
+
+ gdb/ChangeLog:
+
+ 2021-07-25 Tom de Vries <tdevries@suse.de>
+
+ * dwarf2/read.c (attr_to_dynamic_prop): Handle DW_FORM_data16.
+
+2021-07-28 will schmidt <will_schmidt@vnet.ibm.com>
+
+ Externalize the _bfd_set_gp_value function
+ This change adds an external-visible wrapper for the _bfd_set_gp_value
+ function. This is a prerequisite for some gdb patches that better
+ handle powerpc64le relocations against ".TOC.".
+
+ * bfd.c (bfd_set_gp_value): New externally visible wrapper
+ for _bfd_set_gp_value.
+ * bfd-in2.h: Regenerate.
+
+2021-07-28 Alan Modra <amodra@gmail.com>
+
+ PowerPC: ignore sticky options for .machine
+ PowerPC gas and objdump for a long time have allowed certain -m/-M
+ options that extend a base cpu with extra functional units to be
+ specified before the base cpu. For example, "-maltivec -mpower4" is
+ the same as "-mpower4 -maltivec". See
+ https://sourceware.org/pipermail/binutils/2008-January/054935.html
+
+ It doesn't make as much sense that .machine keep any of these
+ "sticky" flags when handling a new base cpu. See gcc PR101393. I
+ think that instead .machine ought to override the command line.
+ That's what this patch does. It is still possible to extend cpu
+ functionality with .machine. For example the following can be
+ assembled when selecting a basic -mppc on the command line:
+ .machine power5
+ .machine altivec
+ frin 1,2
+ lvsr 3,4,5
+ Here, ".machine altivec" extends the ".machine power5" so that both
+ the power5 "frin" instruction and the altivec "lvsr" instruction are
+ enabled. Swapping the two ".machine" directives would result in
+ failure to assemble "lvsr".
+
+ This change will expose some assembly errors, such as the one in
+ glibc/sysdeps/powerpc/powerpc64/tst-ucontext-ppc64-vscr.c, a file
+ compiled with -maltivec but containing
+ asm volatile (".machine push;\n"
+ ".machine \"power5\";\n"
+ "vspltisb %0,0;\n"
+ "vspltisb %1,-1;\n"
+ "vpkuwus %0,%0,%1;\n"
+ "mfvscr %0;\n"
+ "stvx %0,0,%2;\n"
+ ".machine pop;"
+ : "=v" (v0), "=v" (v1)
+ : "r" (vscr_ptr)
+ : "memory");
+ It's just wrong to choose power5 for a bunch of altivec instructions
+ and in fact all of those .machine directives are unnecessary.
+
+ * config/tc-ppc.c (ppc_machine): Don't use command line
+ sticky options.
+
+2021-07-28 GDB Administrator <gdbadmin@sourceware.org>
+
+ Automatic date update in version.in
+
+2021-07-27 Tom de Vries <tdevries@suse.de>
+
+ [gdb/testsuite] Add xfail for PR gcc/101643
+ With gcc 8.5.0 I run into:
+ ...
+ (gdb) print bad^M
+ $2 = (0 => 0 <repeats 25 times>)^M
+ (gdb) FAIL: gdb.ada/big_packed_array.exp: scenario=minimal: print bad
+ ...
+ while with gcc 9.3.1 we have instead:
+ ...
+ (gdb) print bad^M
+ $2 = (false <repeats 196 times>)^M
+ (gdb) PASS: gdb.ada/big_packed_array.exp: scenario=minimal: print bad
+ ...
+
+ This is caused by gcc PR, which I've filed at
+ https://gcc.gnu.org/bugzilla/show_bug.cgi?id=101643 "[debug, ada] packed array
+ not described as packed".
+
+ Fix by marking this as XFAIL.
+
+ Tested on x86_64-linux.
+
+ gdb/ChangeLog:
+
+ 2021-07-27 Tom de Vries <tdevries@suse.de>
+
+ PR testsuite/26904
+ * gdb/testsuite/gdb.ada/big_packed_array.exp: Add xfail.
+
+2021-07-27 Tom de Vries <tdevries@suse.de>
+
+ [gdb/testsuite] Add xfail for PR gcc/101633
+ With gcc 7.5.0, I run into:
+ ...
+ (gdb) print objects^M
+ $1 = ((tag => object, values => ()), (tag => unused))^M
+ (gdb) FAIL: gdb.ada/array_of_variant.exp: scenario=minimal: print entire array
+ ...
+ while with gcc 8.5.0 we have:
+ ...
+ (gdb) print objects^M
+ $1 = ((tag => object, values => (2, 2, 2, 2, 2)), (tag => unused))^M
+ (gdb) PASS: gdb.ada/array_of_variant.exp: scenario=minimal: print entire array
+ ...
+
+ This is due to a gcc PR, which I've filed at
+ https://gcc.gnu.org/bugzilla/show_bug.cgi?id=101633 "Bug 101633 - [debug]
+ DW_TAG_subrange_type missing DW_AT_upper_bound".
+
+ Fix by marking this and related FAILs as XFAIL.
+
+ Tested on x86_64-linux.
+
+ gdb/ChangeLog:
+
+ 2021-07-27 Tom de Vries <tdevries@suse.de>
+
+ PR testsuite/26903
+ * gdb/testsuite/gdb.ada/array_of_variant.exp: Add xfails.
+
+2021-07-27 Andrew Burgess <andrew.burgess@embecosm.com>
+
+ gdb: remove VALUE_FRAME_ID and fix another frame debug issue
+ This commit was originally part of this patch series:
+
+ (v1): https://sourceware.org/pipermail/gdb-patches/2021-May/179357.html
+ (v2): https://sourceware.org/pipermail/gdb-patches/2021-June/180208.html
+ (v3): https://sourceware.org/pipermail/gdb-patches/2021-July/181028.html
+
+ However, that series is being held up in review, so I wanted to break
+ out some of the non-related fixes in order to get these merged.
+
+ This commit addresses two semi-related issues, both of which are
+ problems exposed by using 'set debug frame on'.
+
+ The first issue is in frame.c in get_prev_frame_always_1, and was
+ introduced by this commit:
+
+ commit a05a883fbaba69d0f80806e46a9457727fcbe74c
+ Date: Tue Jun 29 12:03:50 2021 -0400
+
+ gdb: introduce frame_debug_printf
+
+ This commit replaced fprint_frame with frame_info::to_string.
+ However, the former could handle taking a nullptr while the later, a
+ member function, obviously requires a non-nullptr in order to make the
+ function call. In one place we are not-guaranteed to have a
+ non-nullptr, and so, there is the possibility of triggering undefined
+ behaviour.
+
+ The second issue addressed in this commit has existed for a while in
+ GDB, and would cause this assertion:
+
+ gdb/frame.c:622: internal-error: frame_id get_frame_id(frame_info*): Assertion `fi->this_id.p != frame_id_status::COMPUTING' failed.
+
+ We attempt to get the frame_id for a frame while we are computing the
+ frame_id for that same frame.
+
+ What happens is that when GDB stops we create a frame_info object for
+ the sentinel frame (frame #-1) and then we attempt to unwind this
+ frame to create a frame_info object for frame #0.
+
+ In the test case used here to expose the issue we have created a
+ Python frame unwinder. In the Python unwinder we attemt to read the
+ program counter register.
+
+ Reading this register will initially create a lazy register value.
+ The frame-id stored in the lazy register value will be for the
+ sentinel frame (lazy register values hold the frame-id for the frame
+ from which the register will be unwound).
+
+ However, the Python unwinder does actually want to examine the value
+ of the program counter, and so the lazy register value is resolved
+ into a non-lazy value. This sends GDB into value_fetch_lazy_register
+ in value.c.
+
+ Now, inside this function, if 'set debug frame on' is in effect, then
+ we want to print something like:
+
+ frame=%d, regnum=%d(%s), ....
+
+ Where 'frame=%d' will be the relative frame level of the frame for
+ which the register is being fetched, so, in this case we would expect
+ to see 'frame=0', i.e. we are reading a register as it would be in
+ frame #0. But, remember, the lazy register value actually holds the
+ frame-id for frame #-1 (the sentinel frame).
+
+ So, to get the frame_info for frame #0 we used to call:
+
+ frame = frame_find_by_id (VALUE_FRAME_ID (val));
+
+ Where VALUE_FRAME_ID is:
+
+ #define VALUE_FRAME_ID(val) (get_prev_frame_id_by_id (VALUE_NEXT_FRAME_ID (val)))
+
+ That is, we start with the frame-id for the next frame as obtained by
+ VALUE_NEXT_FRAME_ID, then call get_prev_frame_id_by_id to get the
+ frame-id of the previous frame.
+
+ The get_prev_frame_id_by_id function finds the frame_info for the
+ given frame-id (in this case frame #-1), calls get_prev_frame to get
+ the previous frame, and then calls get_frame_id.
+
+ The problem here is that calling get_frame_id requires that we know
+ the frame unwinder, so then have to try each frame unwinder in turn,
+ which would include the Python unwinder.... which is where we started,
+ and thus we have a loop!
+
+ To prevent this loop GDB has an assertion in place, which is what
+ actually triggers.
+
+ Solving the assertion failure is pretty easy, if we consider the code
+ in value_fetch_lazy_register and get_prev_frame_id_by_id then what we
+ do is:
+
+ 1. Start with a frame_id taken from a value,
+ 2. Lookup the corresponding frame,
+ 3. Find the previous frame,
+ 4. Get the frame_id for that frame, and
+ 5. Lookup the corresponding frame
+ 6. Print the frame's level
+
+ Notice that steps 3 and 5 give us the exact same result, step 4 is
+ just wasted effort. We could shorten this process such that we drop
+ steps 4 and 5, thus:
+
+ 1. Start with a frame_id taken from a value,
+ 2. Lookup the corresponding frame,
+ 3. Find the previous frame,
+ 6. Print the frame's level
+
+ This will give the exact same frame as a result, and this is what I
+ have done in this patch by removing the use of VALUE_FRAME_ID from
+ value_fetch_lazy_register.
+
+ Out of curiosity I looked to see how widely VALUE_FRAME_ID was used,
+ and saw it was only used in one other place in valops.c:value_assign,
+ where, once again, we take the result of VALUE_FRAME_ID and pass it to
+ frame_find_by_id, thus introducing a redundant frame_id lookup.
+
+ I don't think the value_assign case risks triggering the assertion
+ though, as we are unlikely to call value_assign while computing the
+ frame_id for a frame, however, we could make value_assign slightly
+ more efficient, with no real additional complexity, by removing the
+ use of VALUE_FRAME_ID.
+
+ So, in this commit, I completely remove VALUE_FRAME_ID, and replace it
+ with a use of VALUE_NEXT_FRAME_ID, followed by a direct call to
+ get_prev_frame_always, this should make no difference in either case,
+ and resolves the assertion issue from value.c.
+
+ As I said, this patch was originally part of another series, the
+ original test relied on the fixes in that original series. However, I
+ was able to create an alternative test for this issue by enabling
+ frame debug within an existing test script.
+
+ This commit probably fixes bug PR gdb/27938, though the bug doesn't
+ have a reproducer attached so it is not possible to know for sure.
+
+ Bug: https://sourceware.org/bugzilla/show_bug.cgi?id=27938
+
+2021-07-27 Chenghua Xu <xuchenghua@loongson.cn>
+
+ Correct gs264e bfd_mach in mips_arch_choices.
+ opcodes/
+ * mips-dis.c (mips_arch_choices): Correct gs264e bfd_mach.
+
+2021-07-27 Roland McGrath <mcgrathr@google.com>
+
+ Fix ld test case that assumes --enable-textrel-check
+ ld/
+ * testsuite/ld-x86-64/x86-64.exp (Build textrel-1): Use --warn-textrel.
+
+2021-07-27 GDB Administrator <gdbadmin@sourceware.org>
+
+ Automatic date update in version.in
+
+2021-07-27 H.J. Lu <hjl.tools@gmail.com>
+
+ bfd: Set error to bfd_error_malformed_archive only if unset
+ When reading an archive member, set error to bfd_error_malformed_archive
+ on open_nested_file failure only if the error is unset.
+
+ PR ld/28138
+ * archive.c (_bfd_get_elt_at_filepos): Don't set error to
+ bfd_error_malformed_archive if it has been set.
+
+2021-07-26 Carl Love <cel@us.ibm.com>
+
+ Fix for mi-reverse.exp
+ This test fails on PPC64 because PPC64 prints the value of 3.5 with
+ more significant digits than on Intel. The patch updates the regular
+ expression to allow for more significant digits on the constant.
+
+ gdb/testsuite/ChangeLog
+
+ * gdb.mi/mi-reverse.exp: mi_execute_to exec-step reverse add check
+ for additional digits.
+
+2021-07-26 Tom Tromey <tromey@adacore.com>
+
+ Fix the Windows build
+ The gdb build was broken on Windows after the patch to change
+ get_inferior_cwd. This patch fixes the build.
+
+2021-07-26 Shahab Vahedi <shahab@synopsys.com>
+
+ gdb: Fix numerical field extraction for target description "flags"
+ The "val_print_type_code_flags ()" function is responsible for
+ extraction of fields for "flags" data type. These data types are
+ used when describing a custom register type in a target description
+ XML. The logic used for the extraction though is not sound:
+
+ unsigned field_len = TYPE_FIELD_BITSIZE (type, field);
+ ULONGEST field_val
+ = val >> (TYPE_FIELD_BITPOS (type, field) - field_len + 1);
+
+ TYPE_FIELD_BITSIZE: The bit length of the field to be extracted.
+ TYPE_FIELD_BITPOS: The starting position of the field; 0 is LSB.
+ val: The register value.
+
+ Imagine you have a field that starts at position 1 and its length
+ is 4 bits. According to the third line of the code snippet the
+ shifting right would become "val >> -2", or "val >> 0xfff...fe"
+ to be precise. That will result in a "field_val" of 0.
+
+ The correct extraction should be:
+
+ ULONGEST field_val = val >> TYPE_FIELD_BITPOS (type, field);
+
+ The rest of the algorithm that masks out the higher bits is OK.
+
+ Co-Authored-By: Simon Marchi <simon.marchi@efficios.com>
+
+2021-07-26 Andrea Corallo <andrea.corallo@arm.com>
+
+ PATCH [10/10] arm: Alias 'ra_auth_code' to r12 for pacbti.
+ gas/
+ 2021-06-11 Andrea Corallo <andrea.corallo@arm.com>
+
+ * config/tc-arm.c (reg_names): Alias 'ra_auth_code' to r12.
+
+2021-07-26 Andrea Corallo <andrea.corallo@arm.com>
+
+ PATCH [9/10] arm: add 'pacg' instruction for Armv8.1-M pacbti extension
+ gas/
+ 2021-06-11 Andrea Corallo <andrea.corallo@arm.com>
+
+ * config/tc-arm.c (T16_32_TAB): Add '_pacg'.
+ (do_t_pacbti_pacg): New function.
+ (insns): Define 'pacg' insn.
+ * testsuite/gas/arm/armv8_1-m-pacbti.d: Add 'pacg' test.
+ * testsuite/gas/arm/armv8_1-m-pacbti.s: Likewise.
+
+ opcodes/
+ 2021-06-11 Andrea Corallo <andrea.corallo@arm.com>
+
+ * arm-dis.c (thumb32_opcodes): Add 'pacg'.
+
+2021-07-26 Andrea Corallo <andrea.corallo@arm.com>
+
+ PATCH [8/10] arm: add 'autg' instruction for Armv8.1-M pacbti extension
+ gas/
+ 2021-06-11 Andrea Corallo <andrea.corallo@arm.com>
+
+ * config/tc-arm.c (T16_32_TAB): Add '_autg'.
+ (insns): Define 'autg' insn.
+ * testsuite/gas/arm/armv8_1-m-pacbti.d: Add autg test.
+ * testsuite/gas/arm/armv8_1-m-pacbti.s: Likewise.
+
+ opcodes/
+ 2021-06-11 Andrea Corallo <andrea.corallo@arm.com>
+
+ * arm-dis.c (thumb32_opcodes): Add 'autg'.
+
+2021-07-26 Andrea Corallo <andrea.corallo@arm.com>
+
+ PATCH [7/10] arm: add 'bxaut' instruction for Armv8.1-M pacbti extension
+ gas/
+ 2021-06-11 Andrea Corallo <andrea.corallo@arm.com>
+
+ * config/tc-arm.c (T16_32_TAB): Add '_bxaut'.
+ (do_t_pacbti_nonop): New function.
+ (insns): Define 'bxaut' insn.
+ * testsuite/gas/arm/armv8_1-m-pacbti.d: Add 'bxaut' test.
+ * testsuite/gas/arm/armv8_1-m-pacbti.s: Likewise.
+
+ opcodes/
+ 2021-06-11 Andrea Corallo <andrea.corallo@arm.com>
+
+ * arm-dis.c (thumb32_opcodes): Add 'bxaut'.
+
+2021-07-26 Andrea Corallo <andrea.corallo@arm.com>
+
+ PATCH [6/10] arm: Add -march=armv8.1-m.main+pacbti flag
+ gas/
+ 2021-06-11 Andrea Corallo <andrea.corallo@arm.com>
+
+ * config/tc-arm.c (pacbti_ext): Define.
+ (BAD_PACBTI): New macro.
+ (armv8_1m_main_ext_table): Add 'pacbti' extension.
+
+ include/
+ 2021-06-11 Andrea Corallo <andrea.corallo@arm.com>
+
+ * opcode/arm.h (ARM_EXT3_PACBTI, ARM_AEXT3_V8_1M_MAIN_PACBTI): New
+ macro.
+
+2021-07-26 Andrea Corallo <andrea.corallo@arm.com>
+
+ PATCH [5/10] arm: Extend again arm_feature_set struct to provide more bits
+ include/
+ 2021-06-11 Andrea Corallo <andrea.corallo@arm.com>
+
+ * opcode/arm.h (arm_feature_set): Extend 'core' field.
+ (ARM_CPU_HAS_FEATURE, ARM_FSET_CPU_SUBSET, ARM_CPU_IS_ANY)
+ (ARM_MERGE_FEATURE_SETS, ARM_CLEAR_FEATURE, ARM_FEATURE_EQUAL)
+ (ARM_FEATURE_ZERO, ARM_FEATURE_CORE_EQUAL): Account for
+ 'core[2]'.
+ (ARM_FEATURE_CORE_HIGH_HIGH): New macro.
+
+2021-07-26 Andrea Corallo <andrea.corallo@arm.com>
+
+ PATCH [4/10] arm: add 'pac' instruction for Armv8.1-M pacbti extension
+ gas/
+ 2021-06-11 Andrea Corallo <andrea.corallo@arm.com>
+
+ * config/tc-arm.c (T16_32_TAB): Add '_pac'.
+ (insns): Add 'pac' insn.
+ * testsuite/gas/arm/armv8_1-m-pacbti-bad.l: Add pac tests.
+ * testsuite/gas/arm/armv8_1-m-pacbti-bad.s: Likewise.
+ * testsuite/gas/arm/armv8_1-m-pacbti.d: Likewise.
+ * testsuite/gas/arm/armv8_1-m-pacbti.s: Likewise.
+
+ opcodes/
+ 2021-06-11 Andrea Corallo <andrea.corallo@arm.com>
+
+ * arm-dis.c (thumb32_opcodes): Add 'pac'.
+
+2021-07-26 Andrea Corallo <andrea.corallo@arm.com>
+
+ PATCH [3/10] arm: add 'aut' instruction for Armv8.1-M pacbti extension
+ gas/
+ 2021-06-11 Andrea Corallo <andrea.corallo@arm.com>
+
+ * config/tc-arm.c (insns): Add 'aut.'
+ (T16_32_TAB): Add '_aut'.
+ * testsuite/gas/arm/armv8_1-m-pacbti-bad.l: Add 'aut' tests.
+ * testsuite/gas/arm/armv8_1-m-pacbti-bad.s: Likewise.
+ * testsuite/gas/arm/armv8_1-m-pacbti.d: Likewise.
+ * testsuite/gas/arm/armv8_1-m-pacbti.s: Likewise.
+
+ opcodes/
+ 2021-06-11 Andrea Corallo <andrea.corallo@arm.com>
+
+ * arm-dis.c (thumb32_opcodes): Add 'aut'.
+
+2021-07-26 Andrea Corallo <andrea.corallo@arm.com>
+
+ PATCH [2/10] arm: add 'pacbti' instruction for Armv8.1-M pacbti extension
+ gas/
+ 2021-06-11 Andrea Corallo <andrea.corallo@arm.com>
+
+ * config/tc-arm.c
+ (enum operand_parse_code): Add OP_SP and OP_R12.
+ (parse_operands): Add switch cases for OP_SP and OP_R12.
+ (T16_32_TAB): Add '_pacbti'.
+ (do_t_pacbti): New function.
+ (insns): Add 'pacbti'.
+ * testsuite/gas/arm/armv8_1-m-pacbti-bad.d: New file.
+ * testsuite/gas/arm/armv8_1-m-pacbti-bad.l: Likewise.
+ * testsuite/gas/arm/armv8_1-m-pacbti-bad.s: Likewise.
+ * testsuite/gas/arm/armv8_1-m-pacbti.d: Add 'pacbti' to testcase.
+ * testsuite/gas/arm/armv8_1-m-pacbti.s: Likewise.
+
+ opcodes/
+ 2021-06-11 Andrea Corallo <andrea.corallo@arm.com>
+
+ * arm-dis.c (thumb32_opcodes): Add 'pacbti' instruction.
+
+2021-07-26 Andrea Corallo <andrea.corallo@arm.com>
+
+ PATCH [1/10] arm: add 'bti' instruction for Armv8.1-M pacbti extension
+ gas/
+ 2021-06-11 Andrea Corallo <andrea.corallo@arm.com>
+
+ * config/tc-arm.c (insns): Add 'bti' insn.
+ * testsuite/gas/arm/armv8_1-m-pacbti.d: New file.
+ * testsuite/gas/arm/armv8_1-m-pacbti.s: Likewise.
+
+ opcodes/
+ 2021-06-11 Andrea Corallo <andrea.corallo@arm.com>
+
+ * arm-dis.c (thumb32_opcodes): Add bti instruction.
+
+2021-07-26 Andrew Burgess <andrew.burgess@embecosm.com>
+
+ gdb: move remaining ChangeLogs to legacy files
+ In commit:
+
+ commit f069ea46a03ae868581d1c852da28e979ea1245a
+ Date: Sat Jul 3 16:29:08 2021 -0700
+
+ Rename gdb/ChangeLog to gdb/ChangeLog-2021
+
+ The gdb/ChangeLog file was renamed, but all of the other ChangeLog
+ files relating to gdb were left in place.
+
+ As I understand things, the no ChangeLogs policy applies to all the
+ GDB related directories, so this commit renames all of the remaining
+ GDB related ChangeLog files.
+
+ As with the original commit, the intention behind this commit is to
+ hopefully stop people merging ChangeLog entries by mistake.
+
+ The renames carried out in this commit are:
+
+ gdb/doc/ChangeLog -> gdb/doc/ChangeLog-1991-2021
+ gdb/stubs/ChangeLog -> gdb/stubs/ChangeLog-2012-2020
+ gdb/testsuite/ChangeLog -> gdb/testsuite/ChangeLog-2014-2021
+ gdbserver/ChangeLog -> gdbserver/ChangeLog-2002-2021
+ gdbsupport/ChangeLog -> gdbsupport/ChangeLog-2020-2021
+
+2021-07-26 Tankut Baris Aktemur <tankut.baris.aktemur@intel.com>
+
+ gdb/mi: handle no condition argument case for -break-condition
+ As reported in PR gdb/28076 [1], passing no condition argument to the
+ -break-condition command (e.g.: "-break-condition 2") should clear the
+ condition for breakpoint 2, just like CLI's "condition 2", but instead
+ an error message is returned:
+
+ ^error,msg="-break-condition: Missing the <number> and/or <expr> argument"
+
+ The current implementation of the -break-condition command's argument
+ handling (79aabb7308c "gdb/mi: add a '--force' flag to the
+ '-break-condition' command") was done according to the documentation,
+ where the condition argument seemed mandatory. However, the
+ -break-condition command originally (i.e. before the 79aabb7308c
+ patch) used the CLI's "cond" command, and back then not passing a
+ condition argument was clearing out the condition. So, this is a
+ regression in terms of the behavior.
+
+ Fix the argument handling of the -break-condition command to allow not
+ having a condition argument, and also update the document to make the
+ behavior clear. Also add test cases to test the scenarios which were
+ previously not covered.
+
+ [1] https://sourceware.org/bugzilla/show_bug.cgi?id=28076
+
+2021-07-26 GDB Administrator <gdbadmin@sourceware.org>
+
+ Automatic date update in version.in
+
+2021-07-25 GDB Administrator <gdbadmin@sourceware.org>
+
+ Automatic date update in version.in
+
+2021-07-24 Alan Modra <amodra@gmail.com>
+
+ Revert: PowerPC: Don't generate unused section symbols
+ Blindly following x86 broke linux kernel builds.
+
+ bfd/
+ * elf32-ppc.c (TARGET_KEEP_UNUSED_SECTION_SYMBOLS): Define as true.
+ * elf64-ppc.c (TARGET_KEEP_UNUSED_SECTION_SYMBOLS): Likewise.
+ gas/
+ * testsuite/gas/ppc/power4.d: Adjust for section sym change.
+ * testsuite/gas/ppc/test1elf32.d: Likewise.
+ * testsuite/gas/ppc/test1elf64.d: Likewise.
+ ld/
+ * testsuite/ld-powerpc/tlsexe.r: Adjust for section sym change.
+ * testsuite/ld-powerpc/tlsexe32.r: Likewise.
+ * testsuite/ld-powerpc/tlsexe32no.r: Likewise.
+ * testsuite/ld-powerpc/tlsexeno.r: Likewise.
+ * testsuite/ld-powerpc/tlsexenors.r: Likewise.
+ * testsuite/ld-powerpc/tlsexers.r: Likewise.
+ * testsuite/ld-powerpc/tlsexetoc.r: Likewise.
+ * testsuite/ld-powerpc/tlsexetocrs.r: Likewise.
+ * testsuite/ld-powerpc/tlsget.d: Likewise.
+ * testsuite/ld-powerpc/tlsget.wf: Likewise.
+ * testsuite/ld-powerpc/tlsget2.d: Likewise.
+ * testsuite/ld-powerpc/tlsget2.wf: Likewise.
+ * testsuite/ld-powerpc/tlsso.r: Likewise.
+ * testsuite/ld-powerpc/tlsso32.r: Likewise.
+ * testsuite/ld-powerpc/tlstocso.r: Likewise.
+
+2021-07-24 Alan Modra <amodra@gmail.com>
+
+ Re: ld script expression parsing
+ Commit 40726f16a8d7 broke references to sections within ADDR(), and
+ overlays with weird section names.
+
+ * ldgram.y (paren_script_name): New rule.
+ (exp): Use it for ALIGNOF, SIZEOF, ADDR, and LOADADDR. Similarly
+ ensure script mode parsing for section name in SEGMENT_START.
+ (overlay_section): Delete unnecessary ldlex_script call. Backup
+ on a lookahead NAME parsed in expression mode.
+ * testsuite/ld-elf/overlay.s: Add more sections.
+ * testsuite/ld-elf/overlay.t: Test '-' in section names.
+
+2021-07-24 Frederic Cambus <fred@statdns.com>
+
+ Update the NetBSD system call table to match NetBSD-current.
+ Generated from sys/sys/syscall.h revision 1.319.
+
+ We can safely remove the _lwp_gettid syscall, which was never exposed
+ in libc and never made it into a release.
+
+ gdb/ChangeLog:
+
+ 2021-07-23 Frederic Cambus <fred@statdns.com>
+
+ * syscalls/netbsd.xml: Regenerate.
+
+2021-07-24 GDB Administrator <gdbadmin@sourceware.org>
+
+ Automatic date update in version.in
+
+2021-07-23 Simon Marchi <simon.marchi@polymtl.ca>
+
+ gdb/testsuite: test get/set value of unregistered Guile parameter
+ When creating a parameter in Guile, you have to create it using
+ make-parameter and then register it with GDB with register-parameter!.
+ In between, it's still possible (though not documented) to set the
+ parameter's value. I broke this use case by mistake while writing this
+ series, so thought it would be good to have a test for it.
+
+ I suppose that people could use this "feature" to give their parameter
+ an initial value, even though make-parameter has an initial-value
+ parameter for this. Nevertheless, changing this behavior could break
+ some scripts, which is why I think it's important for it to be tested.
+
+ Change-Id: I5b2103e3cec0cfdcccf7ffb00eb05fed8626e66d
+
+2021-07-23 Simon Marchi <simon.marchi@polymtl.ca>
+
+ gdb: remove cmd_list_element::function::sfunc
+ I don't understand what the sfunc function type in
+ cmd_list_element::function is for. Compared to cmd_simple_func_ftype,
+ it has an extra cmd_list_element parameter, giving the callback access
+ to the cmd_list_element for the command being invoked. This allows
+ registering the same callback with many commands, and alter the behavior
+ using the cmd_list_element's context.
+
+ From the comment in cmd_list_element, it sounds like at some point it
+ was the callback function type for set and show functions, hence the
+ "s". But nowadays, it's used for many more commands that need to access
+ the cmd_list_element object (see add_catch_command for example).
+
+ I don't really see the point of having sfunc at all, since do_sfunc is
+ just a trivial shim that changes the order of the arguments. All
+ commands using sfunc could just as well set cmd_list_element::func to
+ their callback directly.
+
+ Therefore, remove the sfunc field in cmd_list_element and everything
+ that goes with it. Rename cmd_const_sfunc_ftype to cmd_func_ftype and
+ use it for cmd_list_element::func, as well as for the add_setshow
+ commands.
+
+ Change-Id: I1eb96326c9b511c293c76996cea0ebc51c70fac0
+
+2021-07-23 Simon Marchi <simon.marchi@polymtl.ca>
+
+ gdb: rename cfunc to simple_func
+ After browsing the CLI code for quite a while and trying really hard, I
+ reached the conclusion that I can't give a meaningful explanation of
+ what "sfunc" and "cfunc" functions are, in cmd_list_element. I don't
+ see a logic at all. That makes it very difficult to do any kind of
+ change. Unless somebody can make sense out of all that, I'd like to try
+ to retro-fit some logic in the cmd_list_element callback function code
+ so that we can understand what is going on, do some cleanups and add new
+ features.
+
+ The first change is about "cfunc". I can't figure out what the "c" in
+ cfunc means. It's not const, because there's already "const" in
+ "cmd_const_cfunc_ftype", and the previous "cmd_cfunc_ftype" had nothing
+ const.. It's not "cmd" or "command", because there's already "cmd" in
+ "cmd_const_cfunc_ftype".
+
+ The "main" command callback, cmd_list_element::func, has three
+ parameters, whereas cfunc has two. It is missing the cmd_list_element
+ parameter. So the only reason I see for cfunc to exist is to be a shim
+ between the three and two parameter versions. Most commands don't need
+ to receive the cmd_list_element object, so adding it everywhere would be
+ long and would just add more unnecessary boilerplate. So since this is
+ the "simple" version of the callback, compared to the "full", I suggest
+ renaming cmd_const_cfunc_ftype into cmd_simple_func_ftype, as well as
+ everything (like the utility functions) that goes with it.
+
+ Change-Id: I4e46cacfd77a66bc1cbf683f6a362072504b7868
+
+2021-07-23 Simon Marchi <simon.marchi@polymtl.ca>
+
+ gdb: make inferior::m_terminal an std::string
+ Same idea as the previous patch, but for m_terminal.
+
+ Change-Id: If9367d5db8c976a4336680adca4ea5bc31ab64d2
+
+2021-07-23 Simon Marchi <simon.marchi@polymtl.ca>
+
+ gdb: make inferior::m_cwd an std::string
+ Same idea as the previous patch, but for m_cwd.
+
+ To keep things consistent across the board, change get_inferior_cwd as
+ well, which is shared with GDBserver. So update the related GDBserver
+ code too.
+
+ Change-Id: Ia2c047fda738d45f3d18bc999eb67ceb8400ce4e
+
+2021-07-23 Simon Marchi <simon.marchi@polymtl.ca>
+
+ gdb: make inferior::m_args an std::string
+ With the current code, both a NULL pointer and an empty string can mean
+ "no arguments". We don't need this distinction. Changing to a string
+ has the advantage that there is now a single state for that (an empty
+ string), which makes the code a bit simpler in my opinion.
+
+ Change-Id: Icdc622820f7869478791dbaa84b4a1c7fec21ced
+
+2021-07-23 Simon Marchi <simon.marchi@polymtl.ca>
+
+ gdb: add setter/getter for inferior cwd
+ Add cwd/set_cwd to the inferior class, remove set_inferior_args.
+ Keep get_inferior_args, because it is used from fork_inferior, in shared
+ code. The cwd could eventually be passed as a parameter eventually,
+ though, I think that would be cleaner.
+
+ Change-Id: Ifb72ea865d7e6f9a491308f0d5c1595579d8427e
+
+2021-07-23 Simon Marchi <simon.marchi@polymtl.ca>
+
+ gdb: add setter/getter for inferior arguments
+ Add args/set_args to the inferior class, remove the set_inferior_args
+ and get_inferior_args functions, that would just be wrappers around
+ them.
+
+ Change-Id: If87d52f3402ce08be26c32897ae8915d9f6d1ea3
+
+2021-07-23 Simon Marchi <simon.marchi@polymtl.ca>
+
+ gdb: remove inferior::{argc,argv}
+ There are currently two states that the inferior args can be stored.
+ The main one is the `args` field, where they are stored as a single
+ string. The other one is the `argc`/`argv` fields.
+
+ This last one is only used for arguments passed in GDB's
+ command line. And the only outcome is that when get_inferior_args is
+ called, `argc`/`argv` are serialized into `args`. So really,
+ `argc`/`argv` is just a staging area before moving the arguments in
+ `args`.
+
+ Simplify this by only keeping the `args` field. Change
+ set_inferior_args_vector to immediately serialize the arguments into
+ `args`, work that would be done in get_inferior_args later anyway.
+
+ The only time where this work would be "wasted" is when the user passes
+ some arguments on the command line, but does not end up running the
+ program. But that just seems unlikely. And it's not that much work.
+
+ Change-Id: Ica0b9859397c095f6530350c8fb3c36905f2044a
+
+2021-07-23 Simon Marchi <simon.marchi@polymtl.ca>
+
+ gdb: un-share set_inferior_cwd declaration
+ The declaration of set_inferior_cwd is currently shared between gdb and
+ gdbserver, in gdbsupport/common-inferior.h. It doesn't need to be, as
+ set_inferior_cwd is not called from common code. Only get_inferior_cwd
+ needs to.
+
+ The motivation for this is that a future patch will change the prototype
+ of set_inferior_cwd in gdb, and I don't want to change it for gdbserver
+ unnecessarily. I see this as a good cleanup in any case, to reduce to
+ just the essential what is shared between GDB and GDBserver.
+
+ Change-Id: I3127d27d078f0503ebf5ccc6fddf14f212426a73
+
+2021-07-23 Simon Marchi <simon.marchi@polymtl.ca>
+
+ gdb.base/setshow.exp: fix duplicate test name
+ Fix:
+
+ DUPLICATE: gdb.base/setshow.exp: test_setshow_args: show args
+
+ by giving some explicit test names.
+
+ Change-Id: I2a738d3d3675ab9b45929e71f5aee0ea6bf92072
+
+2021-07-23 Simon Marchi <simon.marchi@polymtl.ca>
+
+ gdb.base/setshow.exp: split in procs
+ Split in multiple procs, one per topic, and start with a fresh GDB in
+ each. I find it easier to work on a test with multiple smaller
+ independent test procedures. For example, it's possible to comment all
+ but one when working on one. It's also easier to add things without
+ having to think about the impact on existing tests, and vice-versa.
+
+ Change-Id: I19691eed8f9bcb975b2eeff7577cac66251bcbe2
+
+2021-07-23 Simon Marchi <simon.marchi@polymtl.ca>
+
+ gdb.base/setshow.exp: use save_vars to save/restore gdb_prompt
+ Using save_vars is a bit better than what we have now, as it ensures the
+ variable gets restored if the code within it throws an error.
+
+ Change-Id: I3bd6836e5b7efb61b078acadff1a1c8182c19a27
+
+2021-07-23 Simon Marchi <simon.marchi@polymtl.ca>
+
+ gdb/testsuite: split gdb.python/py-parameter.exp in procs
+ Split the file into multiple independent test procs, where each proc
+ starts with a fresh GDB. I find it easier to understand what a test is
+ doing when each part of the test is isolated and self-contained. It
+ makes it easier to comment out some parts of the test while working /
+ debugging a specific part. It also makes it easier to add new things
+ (which a subsequent patch will do) without fear of impacting another part
+ of the test.
+
+ Change-Id: I8b4d52ac82b1492d79b679e13914ed177d8a836d
+
+2021-07-23 Carl Love <cel@us.ibm.com>
+
+ Fix for gdb.python/py-breakpoint.exp
+ Not all systems have hardware breakpoint support. Add a check
+ to see if the system supports hardware breakpoints.
+
+ gdb/testsuite/ChangeLog
+
+ * gdb.python/py-breakpoint.exp (test_hardware_breakpoints): Add
+ check for hardware breakpoint support.
+
+2021-07-23 Andrew Burgess <andrew.burgess@embecosm.com>
+
+ gdb/testsuite: don't error when trying to unset last_spawn_tty_name
+ In spawn_capture_tty_name (lib/gdb.exp) we either set or unset
+ last_spawn_tty_name depending on whether spawn_out(slave,name) exists
+ or not.
+
+ One situation that might cause spawn_out(slave,name) to not exists is
+ if the spawn function is called with the argument -leaveopen, which is
+ how it is called when processes are created as part of a pipeline, the
+ created process has no tty, instead its output is written to a file
+ descriptor.
+
+ If a pipeline is created consisting of multiple processes then there
+ will be multiple sequential calls to spawn, all using -leaveopen. The
+ first of these calls is fine, spawn_out(slave,name) is not set, and so
+ in spawn_capture_tty_name we unset last_spawn_tty_name. However, on
+ the second call to spawn, spawn_out(slave,name) is still not set and
+ so in spawn_capture_tty_name we again try to unset
+ last_spawn_tty_name, this now throws an error (as last_spawn_tty_name
+ is already unset).
+
+ Fix this issue by using -nocomplain with the call to unset in
+ spawn_capture_tty_name.
+
+ Before this commit I was seeing gdb.base/gnu-debugdata.exp report 1
+ pass, and 1 unsupported test. After this commit I now see 16 passes
+ from this test script.
+
+ I have also improved the code that used to do this:
+
+ if { [info exists spawn_out] } {
+ set ::last_spawn_tty_name $spawn_out(slave,name)
+ } else {
+ ...
+ }
+
+ The problem here is that we check for the existence of spawn_out, and
+ then unconditionally read spawn_out(slave,name). A situation could
+ arise where some other element of spawn_out is set,
+ e.g. spawn_out(foo), in which case we would enter the if block and try
+ to read a non-existent variable. After this commit we now check
+ specifically for spawn_out(slave,name).
+
+ Finally, it is worth noting that before this issue was fixed runtest
+ itself, or rather the expect process behind runtest, would segfault
+ while exiting. I haven't looked at all into what the problem is here
+ that caused expect to crash, as fixing the bug in GDB's testing
+ scripts made the segfault go away.
+
+2021-07-23 Jan Beulich <jbeulich@suse.com>
+
+ x86: express unduly set rounding control bits in disassembly
+ While EVEX.L'L are indeed ignored when EVEX.b stands for just SAE,
+ EVEX.b itself is not ignored when an insn permits neither rounding
+ control nor SAE.
+
+ While changing this aspect of EVEX.b handling, also alter unduly set
+ embedded broadcast: Don't call BadOp(), screwing up subsequent
+ disassembly, but emit "{bad}" instead.
+
+2021-07-23 GDB Administrator <gdbadmin@sourceware.org>
+
+ Automatic date update in version.in
+
+2021-07-22 Tom de Vries <tdevries@suse.de>
+
+ [gdb/testsuite] Fix FAILs due to PR gcc/101575
+ When running test-case gdb.ada/formatted_ref.exp with gcc-11 and target board
+ unix/gdb:debug_flags=-gdwarf-4 we run into:
+ ...
+ (gdb) print/x s^M
+ No definition of "s" in current context.^M
+ (gdb) FAIL: gdb.ada/formatted_ref.exp: print/x s
+ ...
+ which is caused by "runto defs.adb:20" taking us to defs__struct1IP:
+ ...
+ (gdb) break defs.adb:20^M
+ Breakpoint 1 at 0x402cfd: defs.adb:20. (2 locations)^M
+ (gdb) run ^M
+ Starting program: formatted_ref ^M
+ ^M
+ Breakpoint 1, defs__struct1IP () at defs.adb:20^M
+ 20 return s.x; -- Set breakpoint marker here.^M
+ (gdb) print s1'access^M
+ ...
+ instead of the expected defs.f1:
+ ...
+ (gdb) break defs.adb:20^M
+ Breakpoint 1 at 0x402d0e: file defs.adb, line 20.^M
+ (gdb) run ^M
+ Starting program: formatted_ref ^M
+ ^M
+ Breakpoint 1, defs.f1 (s=...) at defs.adb:20^M
+ 20 return s.x; -- Set breakpoint marker here.^M
+ ...
+
+ This is caused by incorrect line info due to gcc PR 101575 - "[gcc-11,
+ -gdwarf-4] Missing .file <n> directive causes invalid line info".
+
+ Fix this by when landing in defs__struct1IP:
+ - xfailing the runto, and
+ - issuing a continue to land in defs.f1.
+
+ Likewise in a few other test-cases.
+
+ Tested on x86_64-linux, with:
+ - system gcc.
+ - gcc-11 and target boards unix/gdb:debug_flags=-gdwarf-4 and
+ unix/gdb:debug_flags=-gdwarf-5.
+
+ gdb/testsuite/ChangeLog:
+
+ 2021-07-22 Tom de Vries <tdevries@suse.de>
+
+ * gdb.ada/formatted_ref.exp: Add xfail for PR gcc/101575.
+ * gdb.ada/iwide.exp: Same.
+ * gdb.ada/pkd_arr_elem.exp: Same.
+
+2021-07-22 Jan Beulich <jbeulich@suse.com>
+
+ x86: drop dq{b,d}_mode
+ Their sole use is for {,V}EXTRACTPS / {,V}P{EXT,INS}RB respectively; for
+ consistency also limit use of dqw_mode to Jdqw. 64-bit disassembly
+ reflecting REX.W / VEX.W is not in line with the assembler's opcode
+ table having NoRex64 / VexWIG in all respective templates, i.e. assembly
+ input isn't being honored there either. Obviously the 0FC5 encodings of
+ {,V}PEXTRW then also need adjustment for consistency reasons.
+
+ x86: drop vex_scalar_w_dq_mode
+ It has only a single use and can easily be represented by dq_mode
+ instead. Plus its handling in intel_operand_size() was duplicating
+ that of vex_vsib_{d,q}_w_dq_mode anyway.
+
+ x86: drop xmm_m{b,w,d,q}_mode
+ They're effectively redundant with {b,w,d,q}_mode.
+
+ x86: fold duplicate vector register printing code
+ The bulk of OP_XMM() can be easily reused also for OP_EX(). Break the
+ shared logic out of the function, and invoke the new helper from both
+ places.
+
+ x86: drop vex_mode and vex_scalar_mode
+ These are fully redundant with, respectively, x_mode and scalar_mode.
+
+ x86: correct EVEX.V' handling outside of 64-bit mode
+ Unlike the high bit of VEX.vvvv / EVEX.vvvv, EVEX.V' is not ignored
+ outside of 64-bit mode. Oddly enough there already are tests for these
+ cases, but their expectations were wrong. (This may have been based on
+ an old SDM version, where the restriction wasn't properly spelled out.)
+
+ x86: fold duplicate code in MOVSXD_Fixup()
+ There's no need to have two paths printing the "xd" mnemonic suffix.
+
+ x86: fold duplicate register printing code
+ What so far was OP_E_register() can be easily reused also for OP_G().
+ Add suitable parameters to the function and move the invocation of
+ swap_operand() to OP_E(). Adjust MOVSXD's first operand: There never was
+ a need to use movsxd_mode there, and its use gets in the way of the code
+ folding.
+
+ x86-64: properly bounds-check %bnd<N> in OP_G()
+ The restriction to %bnd0-%bnd3 requires to also check REX.R is clear,
+ just like OP_E_Register() also includes REX.B in its check.
+
+ x86-64: generalize OP_G()'s EVEX.R' handling
+ EVEX.R' is invalid to be clear not only for mask registers, but also for
+ GPRs - IOW everything handled in this function.
+
+2021-07-22 Jan Beulich <jbeulich@suse.com>
+
+ x86: correct VCVT{,U}SI2SD rounding mode handling
+ With EVEX.W clear the instruction doesn't ignore the rounding mode, but
+ (like for other insns without rounding semantics) EVEX.b set causes #UD.
+ Hence the handling of EVEX.W needs to be done when processing
+ evex_rounding_64_mode, not at the decode stages.
+
+ Derive a new 64-bit testcase from the 32-bit one to cover the different
+ EVEX.W treatment in both cases.
+
+2021-07-22 Jan Beulich <jbeulich@suse.com>
+
+ x86: drop OP_Mask()
+ By moving its vex.r check there it becomes fully redundant with OP_G().
+
+2021-07-22 GDB Administrator <gdbadmin@sourceware.org>
+
+ Automatic date update in version.in
+
+2021-07-21 Tom de Vries <tdevries@suse.de>
+
+ [gdb/testsuite] Fix gdb.cp/step-and-next-inline.exp with gcc-11
+ When running test-case gdb.cp/step-and-next-inline.exp with gcc-11, I run
+ into:
+ ...
+ KPASS: gdb.cp/step-and-next-inline.exp: no_header: next step 1 \
+ (PRMS symtab/25507)
+ FAIL: gdb.cp/step-and-next-inline.exp: no_header: next step 2
+ KPASS: gdb.cp/step-and-next-inline.exp: no_header: next step 3 \
+ (PRMS symtab/25507)
+ ...
+
+ [ Note that I get the same result with gcc-11 and target board
+ unix/gdb:debug_flags=-gdwarf-4, so this is not a dwarf 4 vs 5 issue. ]
+
+ With gcc-10, I have this trace:
+ ...
+ 64 get_alias_set (&xx);
+ get_alias_set (t=0x601038 <xx>) at step-and-next-inline.cc:51
+ 51 if (t != NULL
+ 40 if (t->x != i)
+ 52 && TREE_TYPE (t).z != 1
+ 43 return x;
+ 53 && TREE_TYPE (t).z != 2
+ 43 return x;
+ 54 && TREE_TYPE (t).z != 3)
+ 43 return x;
+ main () at step-and-next-inline.cc:65
+ 65 return 0;
+ ...
+ and with gcc-11, I have instead:
+ ...
+ 64 get_alias_set (&xx);
+ get_alias_set (t=0x601038 <xx>) at step-and-next-inline.cc:51
+ 51 if (t != NULL
+ 52 && TREE_TYPE (t).z != 1
+ 43 return x;
+ 53 && TREE_TYPE (t).z != 2
+ 43 return x;
+ 54 && TREE_TYPE (t).z != 3)
+ 43 return x;
+ main () at step-and-next-inline.cc:65
+ 65 return 0;
+ ...
+ and with clang-10, I have instead:
+ ...
+ 64 get_alias_set (&xx);
+ get_alias_set (t=0x601034 <xx>) at step-and-next-inline.cc:51
+ 51 if (t != NULL
+ 52 && TREE_TYPE (t).z != 1
+ 53 && TREE_TYPE (t).z != 2
+ 54 && TREE_TYPE (t).z != 3)
+ 51 if (t != NULL
+ 57 }
+ main () at step-and-next-inline.cc:65
+ 65 return 0;
+ ...
+
+ The test-case tries to verify that we don't step into inlined function
+ tree_check (lines 40-43) (so, with the clang trace we get that right).
+
+ The test-case then tries to kfail the problems when using gcc, but this is
+ done in such a way that the testing still gets out of sync after a failure.
+ That is: the "next step 2" check that is supposed to match
+ "TREE_TYPE (t).z != 2" is actually matching "TREE_TYPE (t).z != 1":
+ ...
+ (gdb) next^M
+ 52 && TREE_TYPE (t).z != 1^M
+ (gdb) PASS: gdb.cp/step-and-next-inline.exp: no_header: next step 2
+ ...
+
+ Fix this by issuing extra nexts to arrive at the required lines.
+
+ Tested on x86_64-linux, with gcc-8, gcc-9, gcc-10, gcc-11, clang-8, clang-10
+ and clang-12.
+
+ gdb/testsuite/ChangeLog:
+
+ 2021-07-20 Tom de Vries <tdevries@suse.de>
+
+ * gdb.cp/step-and-next-inline.cc (tree_check, get_alias_set, main):
+ Tag closing brace with comment.
+ * gdb.cp/step-and-next-inline.h: Update to keep identical with
+ step-and-next-inline.cc.
+ * gdb.cp/step-and-next-inline.exp: Issue extra next when required.
+
+2021-07-21 Nick Clifton <nickc@redhat.com>
+
+ Updated Russian translation for the bfd library
+
+2021-07-21 Luca Boccassi <luca.boccassi@microsoft.com>
+
+ Allows linker scripts to set the SEC_READONLY flag.
+ * ld.texi: Document new output section type.
+ * ldgram.y: Add new token.
+ * ldlang.c: Handle the new flag.
+ * ldlang.h: Add readonly_section to list of section types.
+ * ldlex.l: Add a new identifier.
+ * testsuite/ld-scripts/output-section-types.t: New example linker script.
+ * testsuite/ld-scripts/output-section-types.d: Test driver.
+ * testsyute/ld-scripts/script.exp: Run the new test.
+
+2021-07-21 Tom de Vries <tdevries@suse.de>
+
+ [gdb/testsuite] Fix FAILs due to PR gcc/101452
+ When running test-case gdb.base/ptype-offsets.exp with gcc-11 (with -gdwarf-5
+ default) or gcc-10 with target board unix/gdb:debug_flags=-gdwarf-5 we run
+ into this regression:
+ ...
+ (gdb) ptype/o static_member^M
+ /* offset | size */ type = struct static_member {^M
+ - static static_member Empty;^M
+ /* 0 | 4 */ int abc;^M
+ ^M
+ /* total size (bytes): 4 */^M
+ }^M
+ -(gdb) PASS: gdb.base/ptype-offsets.exp: ptype/o static_member
+ +(gdb) FAIL: gdb.base/ptype-offsets.exp: ptype/o static_member
+ ...
+
+ This is caused by missing debug info, which I filed as gcc PR101452 - "[debug,
+ dwarf-5] undefined static member removed by
+ -feliminate-unused-debug-symbols".
+
+ It's not clear yet whether this is a bug or a feature, but work around this in
+ the test-cases by:
+ - defining the static member
+ - adding additional_flags=-fno-eliminate-unused-debug-types.
+
+ Tested on x86_64-linux.
+
+ gdb/testsuite/ChangeLog:
+
+ 2021-07-20 Tom de Vries <tdevries@suse.de>
+
+ * lib/gdb.exp (gcc_major_version): New proc.
+ * gdb.base/ptype-offsets.cc: Define static member static_member::Empty.
+ * gdb.cp/templates.exp: Define static member using -DGCC_BUG.
+ * gdb.cp/m-static.exp: Add
+ additional_flags=-fno-eliminate-unused-debug-types.
+ * gdb.cp/pr-574.exp: Same.
+ * gdb.cp/pr9167.exp: Same.
+
+2021-07-21 Tom de Vries <tdevries@suse.de>
+
+ [gdb/testsuite] Add KFAILs for gdb.ada FAILs with gcc-11
+ With gcc-11 we run into:
+ ...
+ (gdb) print pa_ptr.all^M
+ That operation is not available on integers of more than 8 bytes.^M
+ (gdb) KFAIL: gdb.ada/arrayptr.exp: scenario=all: print pa_ptr.all (PRMS: gdb/20991)
+ ...
+
+ This is due to PR exp/20991 - "__int128 type support". Mark this and similar
+ FAILs as KFAIL.
+
+ Also mark this FAIL:
+ ....
+ (gdb) print pa_ptr(3)^M
+ cannot subscript or call something of type `foo__packed_array_ptr'^M
+ (gdb) FAIL: gdb.ada/arrayptr.exp: scenario=minimal: print pa_ptr(3)
+ ...
+ as a KFAIL for PR ada/28115 - "Support packed array encoded as
+ DW_TAG_subrange_type".
+
+ Tested on x86_64-linux, with gcc-10 and gcc-11.
+
+ gdb/testsuite/ChangeLog:
+
+ 2021-07-21 Tom de Vries <tdevries@suse.de>
+
+ * gdb.ada/arrayptr.exp: Add KFAILs for PR20991 and PR28115.
+ * gdb.ada/exprs.exp: Add KFAILs for PR20991.
+ * gdb.ada/packed_array_assign.exp: Same.
+
+2021-07-21 Alan Modra <amodra@gmail.com>
+
+ as_bad_subtract
+ Many places report errors of the nature "can't resolve a - b".
+ This provides a utility function to report such errors consistently.
+ I removed the section reporting and quotes around symbol names while I
+ was at it. Compare
+ ifunc-2.s:4: Error: can't resolve `bar1' {.text.1 section} - `foo1' {.text.1 section}
+ with
+ ifunc-2.s:4: Error: can't resolve bar1 - foo1
+
+ In many cases the section names don't help the user very much in
+ figuring out what went wrong, and the quotes if present arguably ought
+ to be placed around the entire expression:
+ can't resolve `bar1 - foo1'
+
+ The patch also tidies some tc_get_reloc functions that leak memory on
+ error paths.
+
+ * write.h (as_bad_subtract): Declare.
+ * write.c (as_bad_subtract): New function.
+ (fixup_segment): Use as_bad_subtract.
+ * config/tc-arc.c (md_apply_fix): Likewise.
+ * config/tc-avr.c (md_apply_fix, tc_gen_reloc): Likewise.
+ * config/tc-cris.c (md_apply_fix): Likewise.
+ * config/tc-d10v.c (md_apply_fix): Likewise.
+ * config/tc-d30v.c (md_apply_fix): Likewise.
+ * config/tc-ft32.c (md_apply_fix): Likewise.
+ * config/tc-h8300.c (tc_gen_reloc): Likewise.
+ * config/tc-m68hc11.c (md_apply_fix): Likewise.
+ * config/tc-mmix.c (mmix_frob_file): Likewise.
+ * config/tc-mn10200.c (tc_gen_reloc): Likewise.
+ * config/tc-nds32.c (nds32_apply_fix): Likewise.
+ * config/tc-pru.c (md_apply_fix): Likewise.
+ * config/tc-riscv.c (md_apply_fix): Likewise.
+ * config/tc-s12z.c (md_apply_fix): Likewise.
+ * config/tc-s390.c (md_apply_fix): Likewise.
+ * config/tc-tilegx.c (md_apply_fix): Likewise.
+ * config/tc-tilepro.c (md_apply_fix): Likewise.
+ * config/tc-v850.c (md_apply_fix): Likewise.
+ * config/tc-vax.c (md_apply_fix): Likewise.
+ * config/tc-xc16x.c (tc_gen_reloc): Likewise.
+ * config/tc-xgate.c (md_apply_fix): Likewise.
+ * config/tc-xstormy16.c (xstormy16_md_apply_fix): Likewise.
+ * config/tc-xtensa.c (md_apply_fix): Likewise.
+ * config/tc-z80.c (tc_gen_reloc): Likewise.
+ * config/tc-spu.c (md_apply_fix): Likewise.
+ (tc_gen_reloc): Delete dead code. Free memory on error.
+ * config/tc-cr16.c (tc_gen_reloc): Use as_bad_subtract. Free
+ on error.
+ * config/tc-crx.c (tc_gen_reloc): Likewise.
+ * config/tc-ppc.c (tc_gen_reloc): Likewise.
+ * testsuite/gas/i386/ifunc-2.l: Adjust to suit changed error message.
+ * testsuite/gas/mips/lui-2.l: Likewise.
+ * testsuite/gas/tic6x/reloc-bad-1.l: Likewise.
+
+2021-07-21 John Ericson <git@JohnEricson.me>
+
+ Remove `netbsdpe` support
+ netbsdpe was deprecated in c2ce831330e10dab4703094491f80b6b9a5c2289.
+ Since then, a release has passed (2.37), and it was marked obselete in
+ 5c9cbf07f3f972ecffe13d858010b3179df17b32. Unless I am mistaken, that
+ means we can now remove support altogether.
+
+ All branches in the "active" code are remove, and the target is
+ additionally marked as obsolete next to the other removed ones for
+ libbfd and gdb.
+
+ Per [1] from the NetBSD toolchain list, PE/COFF support was removed a
+ decade ago. Furthermore, the sole mention of this target in the binutils
+ commit history was in 2002. Together, I'm led to believe this target
+ hasn't seen much attention in quite a while.
+
+ [1]: https://mail-index.netbsd.org/tech-toolchain/2021/06/16/msg003996.html
+
+ bfd/
+ * config.bfd: Remove netbsdpe entry.
+ binutils/
+ * configure.ac: Remove netbsdpe entry.
+ * testsuite/lib/binutils-common.exp (is_pecoff_format): Likewise.
+ * configure: Regenerate.
+ gas/
+ * configure.tgt: Remove netbsdpe entry.
+ gdb/
+ * configure.tgt: Add netbsdpe to removed targets.
+ ld/
+ * configure.tgt: Remove netbsdpe entry.
+ * testsuite/ld-bootstrap/bootstrap.exp: Likewise.
+
+2021-07-21 GDB Administrator <gdbadmin@sourceware.org>
+
+ Automatic date update in version.in
+
+2021-07-20 Alan Modra <amodra@gmail.com>
+
+ PR28106, build of 2.37 fails on FreeBSD and Clang
+ https://en.cppreference.com/w/cpp/types/NULL says NULL might be
+ defined as nullptr.
+ https://en.cppreference.com/w/cpp/language/reinterpret_cast says
+ reinterpret_cast can't be used on nullptr.
+
+ PR gold/28106
+ PR gold/27815
+ * gc.h (gc_process_relocs): Use static_cast in Section_id constructor.
+
+2021-07-20 Luis Machado <luis.machado@linaro.org>
+
+ Fix printing of non-address types when memory tagging is enabled
+ When the architecture supports memory tagging, we handle
+ pointer/reference types in a special way, so we can validate tags and
+ show mismatches.
+
+ Unfortunately, the currently implementation errors out when the user
+ prints non-address values: composite types, floats, references, member
+ functions and other things.
+
+ Vector registers:
+
+ (gdb) p $v0
+ Value can't be converted to integer.
+
+ Non-existent internal variables:
+
+ (gdb) p $foo
+ Value can't be converted to integer.
+
+ The same happens for complex types and printing struct/union types.
+
+ There are a few problems here.
+
+ The first one is that after print_command_1 evaluates the expression
+ to print, the tag validation code call value_as_address
+ unconditionally, without making sure we have have a suitable type
+ where it makes to sense to call it. That results in value_as_address
+ (if it isn't given a pointer-like type) trying to treat the value as
+ an integer and convert it to an address, which #1 - doesn't make sense
+ (i.e., no sense in validating tags after "print 1"), and throws for
+ non-integer-convertible types. We fix this by making sure we have a
+ pointer or reference type first, and only if so then proceed to check
+ if the address-like value has tags.
+
+ The second is that we're calling value_as_address even if we have an
+ optimized out or unavailable value, which throws, because the value's
+ contents aren't fully accessible/readable. This error currently
+ escapes out and aborts the print. This case is fixed by checking for
+ optimized out / unavailable explicitly.
+
+ Third, the tag checking process does not gracefully handle exceptions.
+ If any exception is thrown from the tag validation code, we abort the
+ print. E.g., the target may fail to access tags via a running thread.
+ Or the needed /proc files aren't available. Or some other untold
+ reason. This is a bit too rigid. This commit changes print_command_1
+ to catch errors, print them, and still continue with the normal
+ expression printing path instead of erroring out and printing nothing
+ useful.
+
+ With this patch, printing works correctly again:
+
+ (gdb) p $v0
+ $1 = {d = {f = {2.0546950501119882e-81, 2.0546950501119882e-81}, u = {3399988123389603631, 3399988123389603631}, s = {
+ 3399988123389603631, 3399988123389603631}}, s = {f = {1.59329203e-10, 1.59329203e-10, 1.59329203e-10, 1.59329203e-10}, u = {
+ 791621423, 791621423, 791621423, 791621423}, s = {791621423, 791621423, 791621423, 791621423}}, h = {bf = {1.592e-10,
+ 1.592e-10, 1.592e-10, 1.592e-10, 1.592e-10, 1.592e-10, 1.592e-10, 1.592e-10}, f = {0.11224, 0.11224, 0.11224, 0.11224, 0.11224,
+ 0.11224, 0.11224, 0.11224}, u = {12079, 12079, 12079, 12079, 12079, 12079, 12079, 12079}, s = {12079, 12079, 12079, 12079,
+ 12079, 12079, 12079, 12079}}, b = {u = {47 <repeats 16 times>}, s = {47 <repeats 16 times>}}, q = {u = {
+ 62718710765820030520700417840365121327}, s = {62718710765820030520700417840365121327}}}
+ (gdb) p $foo
+ $2 = void
+ (gdb) p 2 + 2i
+ $3 = 2 + 2i
+
+ Bug: https://sourceware.org/bugzilla/show_bug.cgi?id=28110
+
+2021-07-20 Nelson Chu <nelson.chu@sifive.com>
+
+ RISC-V: Minor updates for architecture parser.
+ * Two add subset functions is redundant. Keep the riscv_add_implicit_subset,
+ and renamed it to riscv_add_subset. Besides, if the subset is added in order,
+ then we just add it at the tail of the subset list.
+
+ * Removed the "-march:" prefix from the error messages. Since not only the
+ -march= option will use the parser, but also the architecture elf attributes,
+ the default architecture setting and linker will use the same parser.
+
+ * Use a function, riscv_parse_check_conflicts, to check the conflicts
+ of extensions, including the rv64e and rv32q.
+
+ The rv32emc-elf/rv32i-elf/rv32gc-linux/rv64gc-elf/rv64gc-linux regressions
+ are tested and passed.
+
+ bfd/
+ * elfxx-riscv.c (riscv_lookup_subset): Check the subset tail list
+ first. If the subset is added in order, then we can just add it to
+ the tail without searching the whole list.
+ (riscv_add_subset): Replaced by riscv_add_implicit_subset.
+ (riscv_add_implicit_subset): Renamed to riscv_add_subset.
+ (riscv_parse_add_subset): Updated.
+ (riscv_parsing_subset_version): Removed the "-march:" prefix from
+ the error message.
+ (riscv_parse_prefixed_ext): Likewise.
+ (riscv_parse_std_ext): Likewise. And move the rv<xlen>e check
+ to riscv_parse_check_conflicts.
+ (riscv_parse_check_conflicts): New function used to check conflicts.
+ (riscv_parse_subset): Updated.
+ gas/
+ * testsuite/gas/riscv/march-fail-base-02.l: Updated.
+ * testsuite/gas/riscv/march-fail-unknown-std.l: Likewise.
+
+2021-07-20 GDB Administrator <gdbadmin@sourceware.org>
+
+ Automatic date update in version.in
+
+2021-07-19 Simon Marchi <simon.marchi@polymtl.ca>
+
+ gdb: set current thread in btrace_compute_ftrace_{bts,pt}
+ As documented in bug 28086, test gdb.btrace/enable-new-thread.exp
+ started failing with commit 0618ae414979 ("gdb: optimize
+ all_matching_threads_iterator"):
+
+ (gdb) record btrace^M
+ (gdb) PASS: gdb.btrace/enable-new-thread.exp: record btrace
+ break 24^M
+ Breakpoint 2 at 0x555555555175: file /home/smarchi/src/binutils-gdb/gdb/testsuite/gdb.btrace/enable-new-thread.c, line 24.^M
+ (gdb) continue^M
+ Continuing.^M
+ /home/smarchi/src/binutils-gdb/gdb/inferior.c:303: internal-error: inferior* find_inferior_pid(process_stratum_target*, int): Assertion `pid != 0' failed.^M
+ A problem internal to GDB has been detected,^M
+ further debugging may prove unreliable.^M
+ Quit this debugging session? (y or n) FAIL: gdb.btrace/enable-new-thread.exp: continue to breakpoint: cont to bp.1 (GDB internal error)
+
+ Note that I only see the failure if GDB is compiled without libipt
+ support. This is because GDB then makes use BTS instead of PT, so
+ exercises different code paths.
+
+ I think that the commit above just exposed an existing problem. The
+ stack trace of the internal error is:
+
+ #8 0x0000561cb81e404e in internal_error (file=0x561cb83aa2f8 "/home/smarchi/src/binutils-gdb/gdb/inferior.c", line=303, fmt=0x561cb83aa099 "%s: Assertion `%s' failed.") at /home/smarchi/src/binutils-gdb/gdbsupport/errors.cc:55
+ #9 0x0000561cb7b5c031 in find_inferior_pid (targ=0x561cb8aafb60 <the_amd64_linux_nat_target>, pid=0) at /home/smarchi/src/binutils-gdb/gdb/inferior.c:303
+ #10 0x0000561cb7b5c102 in find_inferior_ptid (targ=0x561cb8aafb60 <the_amd64_linux_nat_target>, ptid=...) at /home/smarchi/src/binutils-gdb/gdb/inferior.c:317
+ #11 0x0000561cb7f1d1c3 in find_thread_ptid (targ=0x561cb8aafb60 <the_amd64_linux_nat_target>, ptid=...) at /home/smarchi/src/binutils-gdb/gdb/thread.c:487
+ #12 0x0000561cb7f1b921 in all_matching_threads_iterator::all_matching_threads_iterator (this=0x7ffc4ee34678, filter_target=0x561cb8aafb60 <the_amd64_linux_nat_target>, filter_ptid=...) at /home/smarchi/src/binutils-gdb/gdb/thread-iter.c:125
+ #13 0x0000561cb77bc462 in filtered_iterator<all_matching_threads_iterator, non_exited_thread_filter>::filtered_iterator<process_stratum_target* const&, ptid_t const&> (this=0x7ffc4ee34670) at /home/smarchi/src/binutils-gdb/gdb/../gdbsupport/filtered-iterator.h:42
+ #14 0x0000561cb77b97cb in all_non_exited_threads_range::begin (this=0x7ffc4ee34650) at /home/smarchi/src/binutils-gdb/gdb/thread-iter.h:243
+ #15 0x0000561cb7d8ba30 in record_btrace_target::record_is_replaying (this=0x561cb8aa6250 <record_btrace_ops>, ptid=...) at /home/smarchi/src/binutils-gdb/gdb/record-btrace.c:1411
+ #16 0x0000561cb7d8bb83 in record_btrace_target::xfer_partial (this=0x561cb8aa6250 <record_btrace_ops>, object=TARGET_OBJECT_MEMORY, annex=0x0, readbuf=0x7ffc4ee34c58 "\260g\343N\374\177", writebuf=0x0, offset=140737352774277, len=1, xfered_len=0x7ffc4ee34ad8) at /home/smarchi/src/binutils-gdb/gdb/record-btrace.c:1437
+ #17 0x0000561cb7ef73a9 in raw_memory_xfer_partial (ops=0x561cb8aa6250 <record_btrace_ops>, readbuf=0x7ffc4ee34c58 "\260g\343N\374\177", writebuf=0x0, memaddr=140737352774277, len=1, xfered_len=0x7ffc4ee34ad8) at /home/smarchi/src/binutils-gdb/gdb/target.c:1504
+ #18 0x0000561cb7ef77da in memory_xfer_partial_1 (ops=0x561cb8aa6250 <record_btrace_ops>, object=TARGET_OBJECT_CODE_MEMORY, readbuf=0x7ffc4ee34c58 "\260g\343N\374\177", writebuf=0x0, memaddr=140737352774277, len=1, xfered_len=0x7ffc4ee34ad8) at /home/smarchi/src/binutils-gdb/gdb/target.c:1635
+ #19 0x0000561cb7ef78b5 in memory_xfer_partial (ops=0x561cb8aa6250 <record_btrace_ops>, object=TARGET_OBJECT_CODE_MEMORY, readbuf=0x7ffc4ee34c58 "\260g\343N\374\177", writebuf=0x0, memaddr=140737352774277, len=1, xfered_len=0x7ffc4ee34ad8) at /home/smarchi/src/binutils-gdb/gdb/target.c:1664
+ #20 0x0000561cb7ef7ba4 in target_xfer_partial (ops=0x561cb8aa6250 <record_btrace_ops>, object=TARGET_OBJECT_CODE_MEMORY, annex=0x0, readbuf=0x7ffc4ee34c58 "\260g\343N\374\177", writebuf=0x0, offset=140737352774277, len=1, xfered_len=0x7ffc4ee34ad8) at /home/smarchi/src/binutils-gdb/gdb/target.c:1721
+ #21 0x0000561cb7ef8503 in target_read_partial (ops=0x561cb8aa6250 <record_btrace_ops>, object=TARGET_OBJECT_CODE_MEMORY, annex=0x0, buf=0x7ffc4ee34c58 "\260g\343N\374\177", offset=140737352774277, len=1, xfered_len=0x7ffc4ee34ad8) at /home/smarchi/src/binutils-gdb/gdb/target.c:1974
+ #22 0x0000561cb7ef861f in target_read (ops=0x561cb8aa6250 <record_btrace_ops>, object=TARGET_OBJECT_CODE_MEMORY, annex=0x0, buf=0x7ffc4ee34c58 "\260g\343N\374\177", offset=140737352774277, len=1) at /home/smarchi/src/binutils-gdb/gdb/target.c:2014
+ #23 0x0000561cb7ef809f in target_read_code (memaddr=140737352774277, myaddr=0x7ffc4ee34c58 "\260g\343N\374\177", len=1) at /home/smarchi/src/binutils-gdb/gdb/target.c:1869
+ #24 0x0000561cb7937f4d in gdb_disassembler::dis_asm_read_memory (memaddr=140737352774277, myaddr=0x7ffc4ee34c58 "\260g\343N\374\177", len=1, info=0x7ffc4ee34e88) at /home/smarchi/src/binutils-gdb/gdb/disasm.c:139
+ #25 0x0000561cb80ab66d in fetch_data (info=0x7ffc4ee34e88, addr=0x7ffc4ee34c59 "g\343N\374\177") at /home/smarchi/src/binutils-gdb/opcodes/i386-dis.c:194
+ #26 0x0000561cb80ab7e2 in ckprefix () at /home/smarchi/src/binutils-gdb/opcodes/i386-dis.c:8628
+ #27 0x0000561cb80adbd8 in print_insn (pc=140737352774277, info=0x7ffc4ee34e88) at /home/smarchi/src/binutils-gdb/opcodes/i386-dis.c:9587
+ #28 0x0000561cb80abe4f in print_insn_i386 (pc=140737352774277, info=0x7ffc4ee34e88) at /home/smarchi/src/binutils-gdb/opcodes/i386-dis.c:8894
+ #29 0x0000561cb7744a19 in default_print_insn (memaddr=140737352774277, info=0x7ffc4ee34e88) at /home/smarchi/src/binutils-gdb/gdb/arch-utils.c:1029
+ #30 0x0000561cb7b33067 in i386_print_insn (pc=140737352774277, info=0x7ffc4ee34e88) at /home/smarchi/src/binutils-gdb/gdb/i386-tdep.c:4013
+ #31 0x0000561cb7acd8f4 in gdbarch_print_insn (gdbarch=0x561cbae2fb60, vma=140737352774277, info=0x7ffc4ee34e88) at /home/smarchi/src/binutils-gdb/gdb/gdbarch.c:3478
+ #32 0x0000561cb793a32d in gdb_disassembler::print_insn (this=0x7ffc4ee34e80, memaddr=140737352774277, branch_delay_insns=0x0) at /home/smarchi/src/binutils-gdb/gdb/disasm.c:795
+ #33 0x0000561cb793a5b0 in gdb_print_insn (gdbarch=0x561cbae2fb60, memaddr=140737352774277, stream=0x561cb8ac99f8 <null_stream>, branch_delay_insns=0x0) at /home/smarchi/src/binutils-gdb/gdb/disasm.c:850
+ #34 0x0000561cb793a631 in gdb_insn_length (gdbarch=0x561cbae2fb60, addr=140737352774277) at /home/smarchi/src/binutils-gdb/gdb/disasm.c:859
+ #35 0x0000561cb77f53f4 in btrace_compute_ftrace_bts (tp=0x561cbba11210, btrace=0x7ffc4ee35188, gaps=...) at /home/smarchi/src/binutils-gdb/gdb/btrace.c:1107
+ #36 0x0000561cb77f55f5 in btrace_compute_ftrace_1 (tp=0x561cbba11210, btrace=0x7ffc4ee35180, cpu=0x0, gaps=...) at /home/smarchi/src/binutils-gdb/gdb/btrace.c:1527
+ #37 0x0000561cb77f5705 in btrace_compute_ftrace (tp=0x561cbba11210, btrace=0x7ffc4ee35180, cpu=0x0) at /home/smarchi/src/binutils-gdb/gdb/btrace.c:1560
+ #38 0x0000561cb77f583b in btrace_add_pc (tp=0x561cbba11210) at /home/smarchi/src/binutils-gdb/gdb/btrace.c:1589
+ #39 0x0000561cb77f5a86 in btrace_enable (tp=0x561cbba11210, conf=0x561cb8ac6878 <record_btrace_conf>) at /home/smarchi/src/binutils-gdb/gdb/btrace.c:1629
+ #40 0x0000561cb7d88d26 in record_btrace_enable_warn (tp=0x561cbba11210) at /home/smarchi/src/binutils-gdb/gdb/record-btrace.c:294
+ #41 0x0000561cb7c603dc in std::__invoke_impl<void, void (*&)(thread_info*), thread_info*> (__f=@0x561cbb6c4878: 0x561cb7d88cdc <record_btrace_enable_warn(thread_info*)>) at /usr/include/c++/10/bits/invoke.h:60
+ #42 0x0000561cb7c5e5a6 in std::__invoke_r<void, void (*&)(thread_info*), thread_info*> (__fn=@0x561cbb6c4878: 0x561cb7d88cdc <record_btrace_enable_warn(thread_info*)>) at /usr/include/c++/10/bits/invoke.h:153
+ #43 0x0000561cb7c5dc92 in std::_Function_handler<void (thread_info*), void (*)(thread_info*)>::_M_invoke(std::_Any_data const&, thread_info*&&) (__functor=..., __args#0=@0x7ffc4ee35310: 0x561cbba11210) at /usr/include/c++/10/bits/std_function.h:291
+ #44 0x0000561cb7f2600f in std::function<void (thread_info*)>::operator()(thread_info*) const (this=0x561cbb6c4878, __args#0=0x561cbba11210) at /usr/include/c++/10/bits/std_function.h:622
+ #45 0x0000561cb7f23dc8 in gdb::observers::observable<thread_info*>::notify (this=0x561cb8ac5aa0 <gdb::observers::new_thread>, args#0=0x561cbba11210) at /home/smarchi/src/binutils-gdb/gdb/../gdbsupport/observable.h:150
+ #46 0x0000561cb7f1c436 in add_thread_silent (targ=0x561cb8aafb60 <the_amd64_linux_nat_target>, ptid=...) at /home/smarchi/src/binutils-gdb/gdb/thread.c:263
+ #47 0x0000561cb7f1c479 in add_thread_with_info (targ=0x561cb8aafb60 <the_amd64_linux_nat_target>, ptid=..., priv=0x561cbb3f7ab0) at /home/smarchi/src/binutils-gdb/gdb/thread.c:272
+ #48 0x0000561cb7bfa1d0 in record_thread (info=0x561cbb0413a0, tp=0x0, ptid=..., th_p=0x7ffc4ee35610, ti_p=0x7ffc4ee35620) at /home/smarchi/src/binutils-gdb/gdb/linux-thread-db.c:1380
+ #49 0x0000561cb7bf7a2a in thread_from_lwp (stopped=0x561cba81db20, ptid=...) at /home/smarchi/src/binutils-gdb/gdb/linux-thread-db.c:429
+ #50 0x0000561cb7bf7ac5 in thread_db_notice_clone (parent=..., child=...) at /home/smarchi/src/binutils-gdb/gdb/linux-thread-db.c:447
+ #51 0x0000561cb7bdc9a2 in linux_handle_extended_wait (lp=0x561cbae25720, status=4991) at /home/smarchi/src/binutils-gdb/gdb/linux-nat.c:1981
+ #52 0x0000561cb7bdf0f3 in linux_nat_filter_event (lwpid=435403, status=198015) at /home/smarchi/src/binutils-gdb/gdb/linux-nat.c:2920
+ #53 0x0000561cb7bdfed6 in linux_nat_wait_1 (ptid=..., ourstatus=0x7ffc4ee36398, target_options=...) at /home/smarchi/src/binutils-gdb/gdb/linux-nat.c:3202
+ #54 0x0000561cb7be0b68 in linux_nat_target::wait (this=0x561cb8aafb60 <the_amd64_linux_nat_target>, ptid=..., ourstatus=0x7ffc4ee36398, target_options=...) at /home/smarchi/src/binutils-gdb/gdb/linux-nat.c:3440
+ #55 0x0000561cb7bfa2fc in thread_db_target::wait (this=0x561cb8a9acd0 <the_thread_db_target>, ptid=..., ourstatus=0x7ffc4ee36398, options=...) at /home/smarchi/src/binutils-gdb/gdb/linux-thread-db.c:1412
+ #56 0x0000561cb7d8e356 in record_btrace_target::wait (this=0x561cb8aa6250 <record_btrace_ops>, ptid=..., status=0x7ffc4ee36398, options=...) at /home/smarchi/src/binutils-gdb/gdb/record-btrace.c:2547
+ #57 0x0000561cb7ef996d in target_wait (ptid=..., status=0x7ffc4ee36398, options=...) at /home/smarchi/src/binutils-gdb/gdb/target.c:2608
+ #58 0x0000561cb7b6d297 in do_target_wait_1 (inf=0x561cba6d8780, ptid=..., status=0x7ffc4ee36398, options=...) at /home/smarchi/src/binutils-gdb/gdb/infrun.c:3640
+ #59 0x0000561cb7b6d43e in operator() (__closure=0x7ffc4ee36190, inf=0x561cba6d8780) at /home/smarchi/src/binutils-gdb/gdb/infrun.c:3701
+ #60 0x0000561cb7b6d7b2 in do_target_wait (ecs=0x7ffc4ee36370, options=...) at /home/smarchi/src/binutils-gdb/gdb/infrun.c:3720
+ #61 0x0000561cb7b6e67d in fetch_inferior_event () at /home/smarchi/src/binutils-gdb/gdb/infrun.c:4069
+ #62 0x0000561cb7b4659b in inferior_event_handler (event_type=INF_REG_EVENT) at /home/smarchi/src/binutils-gdb/gdb/inf-loop.c:41
+ #63 0x0000561cb7be25f7 in handle_target_event (error=0, client_data=0x0) at /home/smarchi/src/binutils-gdb/gdb/linux-nat.c:4227
+ #64 0x0000561cb81e4ee2 in handle_file_event (file_ptr=0x561cbae24e10, ready_mask=1) at /home/smarchi/src/binutils-gdb/gdbsupport/event-loop.cc:575
+ #65 0x0000561cb81e5490 in gdb_wait_for_event (block=0) at /home/smarchi/src/binutils-gdb/gdbsupport/event-loop.cc:701
+ #66 0x0000561cb81e41be in gdb_do_one_event () at /home/smarchi/src/binutils-gdb/gdbsupport/event-loop.cc:212
+ #67 0x0000561cb7c18096 in start_event_loop () at /home/smarchi/src/binutils-gdb/gdb/main.c:421
+ #68 0x0000561cb7c181e0 in captured_command_loop () at /home/smarchi/src/binutils-gdb/gdb/main.c:481
+ #69 0x0000561cb7c19d7e in captured_main (data=0x7ffc4ee366a0) at /home/smarchi/src/binutils-gdb/gdb/main.c:1353
+ #70 0x0000561cb7c19df0 in gdb_main (args=0x7ffc4ee366a0) at /home/smarchi/src/binutils-gdb/gdb/main.c:1368
+ #71 0x0000561cb7693186 in main (argc=11, argv=0x7ffc4ee367b8) at /home/smarchi/src/binutils-gdb/gdb/gdb.c:32
+
+ At frame 45, the new_thread observable is fired. At this moment, the
+ new thread isn't the current thread, inferior_ptid is null_ptid. I
+ think this is ok: the new_thread observable doesn't give any guarantee
+ on the global context when observers are invoked. Frame 35,
+ btrace_compute_ftrace_bts, calls gdb_insn_length. gdb_insn_length
+ doesn't have a thread_info or other parameter what could indicate where
+ to read memory from, it implicitly uses the global context
+ (inferior_ptid).
+
+ So we reach the all_non_exited_threads_range in
+ record_btrace_target::record_is_replaying with a null inferior_ptid.
+ The previous implemention of all_non_exited_threads_range didn't care,
+ but the new one does. The problem of calling gdb_insn_length and
+ ultimately trying to read memory with a null inferior_ptid already
+ existed, but the commit mentioned above made it visible.
+
+ Something between frames 40 (record_btrace_enable_warn) and 35
+ (btrace_compute_ftrace_bts) needs to be switching the global context to
+ make TP the current thread. Since btrace_compute_ftrace_bts takes the
+ thread_info to work with as a parameter, that typically means that it
+ doesn't require its caller to also set the global current context
+ (current thread) when calling. If it needs to call other functions
+ that do require the global current thread to be set, then it needs to
+ temporarily change the current thread while calling these other
+ functions. Therefore, switch and restore the current thread in
+ btrace_compute_ftrace_bts.
+
+ By inspection, it looks like btrace_compute_ftrace_pt may also call
+ functions sensitive to the global context: it installs the
+ btrace_pt_readmem_callback callback in the PT instruction decoder. When
+ this function gets called, inferior_ptid must be set appropriately. Add
+ a switch and restore in there too.
+
+ Bug: https://sourceware.org/bugzilla/show_bug.cgi?id=28086
+ Change-Id: I407fbfe41aab990068bd102491aa3709b0a034b3
+
+2021-07-19 GDB Administrator <gdbadmin@sourceware.org>
+
+ Automatic date update in version.in
+
+2021-07-18 Nick Clifton <nickc@redhat.com>
+
+ Move pending-obsolesence targets onto the obsolete list.
+ * config.bfd: Move pending obsoletion targets to obsolete list.
+
+ Update how-to-make-a-release checklist with latest changes from 2.37 release
+
+2021-07-18 Michael Krasnyk <mkrasnyk@argo.ai>
+
+ PR28098 Skip R_*_NONE relocation entries with zero r_sym without counting
+ PR gold/28098
+ * reloc.cc (Track_relocs::advance): Skip R_*_NONE relocation entries
+ with r_sym of zero without counting in advance method.
+
+2021-07-18 Simon Marchi <simon.marchi@polymtl.ca>
+
+ gdb: convert nat/x86-dregs.c macros to functions
+ I'm debugging why GDB crashes on OpenBSD/amd64, turns out it's because
+ x86_dr_low.get_status is nullptr. It would have been useful to be able
+ to break on x86_dr_low_get_status, so I thought it would be a good
+ reason to convert these function-like macros into functions.
+
+ Change-Id: Ic200b50ef8455b4697bc518da0fa2bb704cf4721
+
+2021-07-18 GDB Administrator <gdbadmin@sourceware.org>
+
+ Automatic date update in version.in
+
+2021-07-17 Tom Tromey <tom@tromey.com>
+
+ Fix file-name handling regression with DWARF index
+ When run with the gdb-index or debug-names target boards, dup-psym.exp
+ fails. This came up for me because my new DWARF scanner reuses this
+ part of the existing index code, and so it registers as a regression.
+ This is PR symtab/25834.
+
+ Looking into this, I found that the DWARF index code here is fairly
+ different from the psymtab code. I don't think there's a deep reason
+ for this, and in fact, it seemed to me that the index code could
+ simply mimic what the psymtab code already does.
+
+ That is what this patch implements. The DW_AT_name and DW_AT_comp_dir
+ are now stored in the quick file names table. This may require
+ allocating a quick file names table even when DW_AT_stmt_list does not
+ exist. Then, the functions that work with this data are changed to
+ use find_source_or_rewrite, just as the psymbol code does. Finally,
+ line_header::file_full_name is removed, as it is no longer needed.
+
+ Currently, the index maintains a hash table of "quick file names".
+ The hash table uses a deletion function to free the "real name"
+ components when necessary. There's also a second such function to
+ implement the forget_cached_source_info method.
+
+ This bug fix patch will create a quick file name object even when
+ there is no DW_AT_stmt_list, meaning that the object won't be entered
+ in the hash table. So, this patch changes the memory management
+ approach so that the entries are cleared when the per-BFD object is
+ destroyed. (A dwarf2_per_cu_data destructor is not introduced,
+ because we have been avoiding adding a vtable to that class.)
+
+ Bug: https://sourceware.org/bugzilla/show_bug.cgi?id=25834
+
+2021-07-17 Tom Tromey <tom@tromey.com>
+
+ Check for debug-types in map_symbol_filenames
+ map_symbol_filenames can skip type units -- in fact I think it has to,
+ due to the assertion at the top of dw2_get_file_names. This may be a
+ regression due to the TU/CU unification patch, I did not check.
+
+ Simplify DWARF file name caching
+ The DWARF index file name caching code only records when a line table
+ has been read and the reading failed. However, the code would be
+ simpler if it recorded any attempt, which is what this patch
+ implements.
+
+ Introduce find_source_or_rewrite
+ The final bug fix in this series would duplicate the logic in
+ psymtab_to_fullname, so this patch extracts the body of this function
+ into a new function.
+
+ Simplify file_and_directory storage management
+ file_and_directory carries a std::string in case the compilation
+ directory is computed, but a subsequent patch wants to preserve this
+ string without also having to maintain the storage for it. So, this
+ patch arranges for the compilation directory string to be stored in
+ the per-BFD string bcache instead.
+
+ Pass file_and_directory through DWARF line-decoding code
+ This patch removes the redundant "comp_unit" parameter from
+ compute_include_file_name, and arranges to pass a file_and_directory
+ object from the readers down to this function. It also changes the
+ partial symtab reader to use find_file_and_directory, rather than
+ reimplement this functionality by hand.
+
+ Rename and refactor psymtab_include_file_name
+ In order to fix an index-related regression, I want to use
+ psymtab_include_file_name in the DWARF index file-handling code. This
+ patch renames this function and changes it to no longer require a
+ partial symtab to be passed in. A subsequent patch will further
+ refactor this code to remove the redundant parameter (which was always
+ there but is now more obvious).
+
+2021-07-17 Sergey Belyashov <Sergey.Belyashov@gmail.com>
+
+ Add basic Z80 CPU support
+ Supported ISAs:
+ - Z80 (all undocumented instructions)
+ - Z180
+ - eZ80 (Z80 mode only)
+
+ Datasheets:
+ Z80: https://www.zilog.com/manage_directlink.php?filepath=docs/z80/um0080&extn=.pdf
+ Z180: https://www.zilog.com/manage_directlink.php?filepath=docs/z180/ps0140&extn=.pdf
+ eZ80: http://www.zilog.com/force_download.php?filepath=YUhSMGNEb3ZMM2QzZHk1NmFXeHZaeTVqYjIwdlpHOWpjeTlWVFRBd056Y3VjR1Jt
+
+ To debug Z80 programs using GDB you must configure and embed
+ z80-stub.c to your program (SDCC compiler is required). Or
+ you may use some simulator with GDB support.
+
+ gdb/ChangeLog:
+
+ * Makefile.in (ALL_TARGET_OBS): Add z80-tdep.c.
+ * NEWS: Mention z80 support.
+ * configure.tgt: Handle z80*.
+ * features/Makefile (XMLTOC): Add z80.xml.
+ * features/z80-cpu.xml: New.
+ * features/z80.c: Generate.
+ * features/z80.xml: New.
+ * z80-tdep.c: New file.
+ * z80-tdep.h: New file.
+
+ gdb/stubs/ChangeLog:
+
+ * z80-stub.c: New file.
+
+ Change-Id: Id0b7a6e210c3f93c6853c5e3031b7bcee47d0db9
+
+2021-07-17 Simon Marchi <simon.marchi@polymtl.ca>
+
+ gdb: make all_inferiors_safe actually work
+ The test gdb.threads/fork-plus-threads.exp fails since 08bdefb58b78
+ ("gdb: make inferior_list use intrusive_list"):
+
+ FAIL: gdb.threads/fork-plus-threads.exp: detach-on-fork=off: only inferior 1 left
+
+ Looking at the log, we see that we are left with a bunch of inferiors in
+ the detach-on-fork=off case:
+
+ info inferiors^M
+ Num Description Connection Executable ^M
+ * 1 <null> <snip>/fork-plus-threads ^M
+ 2 <null> <snip>/fork-plus-threads ^M
+ 3 <null> <snip>/fork-plus-threads ^M
+ 4 <null> <snip>/fork-plus-threads ^M
+ 5 <null> <snip>/fork-plus-threads ^M
+ 6 <null> <snip>/fork-plus-threads ^M
+ 7 <null> <snip>/fork-plus-threads ^M
+ 8 <null> <snip>/fork-plus-threads ^M
+ 9 <null> <snip>/fork-plus-threads ^M
+ 10 <null> <snip>/fork-plus-threads ^M
+ 11 <null> <snip>/fork-plus-threads ^M
+ (gdb) FAIL: gdb.threads/fork-plus-threads.exp: detach-on-fork=off: only inferior 1 left
+
+ when we expect to have just one. The problem is prune_inferiors not
+ pruning inferiors. And this is caused by all_inferiors_safe not
+ actually iterating on inferiors. The current implementation:
+
+ inline all_inferiors_safe_range
+ all_inferiors_safe ()
+ {
+ return {};
+ }
+
+ default-constructs an all_inferiors_safe_range, which default-constructs
+ an all_inferiors_safe_iterator as its m_begin field, which
+ default-constructs a all_inferiors_iterator. A default-constructed
+ all_inferiors_iterator is an end iterator, which means we have
+ constructed an (end,end) all_inferiors_safe_range.
+
+ We actually need to pass down the list on which we want to iterator
+ (that is the inferior_list global), so that all_inferiors_iterator's
+ first constructor is chosen. We also pass nullptr as the proc_target
+ filter. In this case, we don't do any filtering, but if in the future
+ all_inferiors_safe needed to allow filtering on process target (like
+ all_inferiors does), we could pass down a process target pointer.
+
+ basic_safe_iterator's constructor needs to be changed to allow
+ constructing the wrapped iterator with multiple arguments, not just one.
+
+ With this, gdb.threads/fork-plus-threads.exp is passing once again for
+ me.
+
+ Change-Id: I650552ede596e3590c4b7606ce403690a0278a01
+
+2021-07-17 GDB Administrator <gdbadmin@sourceware.org>
+
+ Automatic date update in version.in
+
+2021-07-16 Lancelot SIX <lsix@lancelotsix.com>
+
+ gdb: Support stepping out from signal handler on riscv*-linux
+ Currently, gdb cannot step outside of a signal handler on RISC-V
+ platforms. This causes multiple failures in gdb.base/sigstep.exp:
+
+ FAIL: gdb.base/sigstep.exp: continue to handler, nothing in handler, step from handler: leave handler (timeout)
+ FAIL: gdb.base/sigstep.exp: continue to handler, si+advance in handler, step from handler: leave handler (timeout)
+ FAIL: gdb.base/sigstep.exp: continue to handler, nothing in handler, next from handler: leave handler (timeout)
+ FAIL: gdb.base/sigstep.exp: continue to handler, si+advance in handler, next from handler: leave handler (timeout)
+ FAIL: gdb.base/sigstep.exp: stepi from handleri: leave signal trampoline
+ FAIL: gdb.base/sigstep.exp: nexti from handleri: leave signal trampoline
+
+ === gdb Summary ===
+
+ # of expected passes 587
+ # of unexpected failures 6
+
+ This patch adds support for stepping outside of a signal handler on
+ riscv*-*-linux*.
+
+ Implementation is heavily inspired from mips_linux_syscall_next_pc and
+ surroundings as advised by Pedro Alves.
+
+ After this patch, all tests in gdb.base/sigstep.exp pass.
+
+ Build and tested on riscv64-linux-gnu.
+
+2021-07-16 Lancelot SIX <lsix@lancelotsix.com>
+
+ gdb/testsuite: Declare that riscv*-*-linux* cannot hardware_single_step
+ Many tests fail in gdb/testsuite/gdb.base/sigstep.exp on
+ riscv64-linux-gnu. Those tests check that when stepping, if the
+ debuggee received a signal it should step inside the signal handler.
+
+ This feature requires hardware support for single stepping (or at least
+ kernel support), but none are available on riscv*-linux-gnu hosts, at
+ the moment at least.
+
+ This patch adds RISC-V to the list of configurations that does not
+ have hardware single step capability, disabling tests relying on such
+ feature.
+
+ Tested on riscv64-linux-gnu.
+
+2021-07-16 Tom Tromey <tom@tromey.com>
+
+ Document quick_symbol_functions::expand_symtabs_matching invariant
+ While working on my series to replace the DWARF psymbol reader, I
+ noticed that the expand_symtabs_matching has an undocumented
+ invariant. I think that, if this invariant is not followed, then GDB
+ will crash. So, this patch documents this in the relevant spots and
+ introduces some asserts to make it clear.
+
+ Regression tested on x86-64 Fedora 32.
+
+2021-07-16 Tom Tromey <tromey@adacore.com>
+
+ Fix array stride bug
+ Investigation of using the Python API with an Ada program showed that
+ an array of dynamic types was not being handled properly. I tracked
+ this down to an oddity of how array strides are handled.
+
+ In gdb, an array stride can be attached to the range type, via the
+ range_bounds object. However, the stride can also be put into the
+ array's first field. From create_range_type_with_stride:
+
+ else if (bit_stride > 0)
+ TYPE_FIELD_BITSIZE (result_type, 0) = bit_stride;
+
+ It's hard to be sure why this is done, but I would guess a combination
+ of historical reasons plus a desire (mentioned in a comment somewhere)
+ to avoid modifying the range type.
+
+ This patch fixes the problem by changing type::bit_stride to
+ understand this convention. It also fixes one spot that reproduces
+ this logic.
+
+ Regression tested on x86-64 Fedora 32.
+
+2021-07-16 Giulio Benetti <giulio.benetti@benettiengineering.com>
+
+ or1k: fix pc-relative relocation against dynamic on PC relative 26 bit relocation.
+ bfd * elf32-or1k.c (or1k_elf_relocate_section): Use a separate entry
+ in switch case R_OR1K_INSN_REL_26 where we need to check for
+ !SYMBOL_CALLS_LOCAL() instead of !SYMBOL_REFERENCES_LOCAL().
+
+2021-07-16 Nick Clifton <nickc@redhat.com>
+
+ Updated Swedish translation for the binutils sub-directory
+
+2021-07-16 GDB Administrator <gdbadmin@sourceware.org>
+
+ Automatic date update in version.in
+
+2021-07-15 Tom Tromey <tromey@adacore.com>
+
+ Avoid expression parsing crash with unknown language
+ PR gdb/28093 points out that gdb crashes when language is set to
+ "unknown" and expression parsing is attempted. At first I thought
+ this was a regression due to the expression rewrite, but it turns out
+ that older versions crash as well.
+
+ This patch avoids the crash by changing the default expression parser
+ to throw an exception. I think this is preferable -- the current
+ behavior of silently doing nothing does not really make sense.
+
+ Bug: https://sourceware.org/bugzilla/show_bug.cgi?id=28093
+
+2021-07-15 Simon Marchi <simon.marchi@polymtl.ca>
+
+ gdb: pass child_ptid and fork kind to target_ops::follow_fork
+ This is a small cleanup I think would be nice, that I spotted while
+ doing the following patch.
+
+ gdb/ChangeLog:
+
+ * target.h (struct target_ops) <follow_fork>: Add ptid and
+ target_waitkind parameters.
+ (target_follow_fork): Likewise.
+ * target.c (default_follow_fork): Likewise.
+ (target_follow_fork): Likewise.
+ * fbsd-nat.h (class fbsd_nat_target) <follow_fork>: Likewise.
+ * fbsd-nat.c (fbsd_nat_target::follow_fork): Likewise.
+ * linux-nat.h (class linux_nat_target) <follow_fork>: Likewise.
+ * linux-nat.c (linux_nat_target::follow_fork): Likewise.
+ * obsd-nat.h (class obsd_nat_target) <follow_fork>: Likewise.
+ * obsd-nat.c (obsd_nat_target::follow_fork): Likewise.
+ * remote.c (class remote_target) <follow_fork>: Likewise.
+ * target-debug.h (target_debug_print_target_waitkind): New.
+ * target-delegates.c: Re-generate.
+
+ Change-Id: I5421a542f2e19100a22b74cc333d2b235d0de3c8
+
+2021-07-15 Simon Marchi <simon.marchi@polymtl.ca>
+
+ gdb: call post_create_inferior at end of follow_fork_inferior
+ GDB doesn't handle well the case of an inferior using the JIT interface
+ to register JIT-ed objfiles and forking. If an inferior registers a
+ code object using the JIT interface and then forks, the child process
+ conceptually has the same code object loaded, so GDB should look it up
+ and learn about it (it currently doesn't).
+
+ To achieve this, I think it would make sense to have the
+ inferior_created observable called when an inferior is created due to a
+ fork in follow_fork_inferior. The inferior_created observable is
+ currently called both after starting a new inferior and after attaching
+ to an inferior, allowing various sub-components to learn about that new
+ executing inferior. We can see handling a fork child just like
+ attaching to it, so any work done when attaching should also be done in
+ the case of a fork child.
+
+ Instead of just calling the inferior_created observable, this patch
+ makes follow_fork_inferior call the whole post_create_inferior function.
+ This way, the attach and follow-fork code code paths are more alike.
+
+ Given that post_create_inferior calls solib_create_inferior_hook,
+ follow_fork_inferior doesn't need to do it itself, so those calls to
+ solib_create_inferior_hook are removed.
+
+ One question you may have: why not just call post_create_inferior at the
+ places where solib_create_inferior_hook is currently called, instead of
+ after target_follow_fork?
+
+ - there's something fishy for the second solib_create_inferior_hook
+ call site: at this point we have switched the current program space
+ to the child's, but not the current inferior nor the current thread.
+ So solib_create_inferior_hook (and everything under, including
+ check_for_thread_db, for example) is called with inferior 1 as the
+ current inferior and inferior 2's program space as the current
+ program space. I think that's wrong, because at this point we are
+ setting up inferior 2, and all that code relies on the current
+ inferior. We could just add a switch_to_thread call before it to
+ make inferior 2 the current one, but there are other problems (see
+ below).
+
+ - solib_create_inferior_hook is currently not called on the
+ `follow_child && detach_fork` path. I think we need to call it,
+ because we still get a new inferior in that case (even though we
+ detach the parent). If we only call post_create_inferior where
+ solib_create_inferior_hook used to be called, then the JIT
+ subcomponent doesn't get informed about the new inferior, and that
+ introduces a failure in the new gdb.base/jit-elf-fork.exp test.
+
+ - if we try to put the post_create_inferior just after the
+ switch_to_thread that was originally at line 662, or just before the
+ call to target_follow_fork, we introduce a subtle failure in
+ gdb.threads/fork-thread-pending.exp. What happens then is that
+ libthread_db gets loaded (somewhere under post_create_inferior)
+ before the linux-nat target learns about the LWPs (which happens in
+ linux_nat_target::follow_fork). As a result, the ALL_LWPS loop in
+ try_thread_db_load_1 doesn't see the child LWP, and the thread-db
+ target doesn't have the chance to fill in thread_info::priv. A bit
+ later, when the test does "info threads", and
+ thread_db_target::pid_to_str is called, the thread-db target doesn't
+ recognize the thread as one of its own, and delegates the request to
+ the target below. Because the pid_to_str output is not the expected
+ one, the test fails.
+
+ This tells me that we need to call the process target's follow_fork
+ first, to make the process target create the necessary LWP and thread
+ structures. Then, we can call post_create_inferior to let the other
+ components of GDB do their thing.
+
+ But then you may ask: check_for_thread_db is already called today,
+ somewhere under solib_create_inferior_hook, and that is before
+ target_follow_fork, why don't we see this ordering problem!? Well,
+ because of the first bullet point: when check_for_thread_db /
+ thread_db_load are called, the current inferior is (erroneously)
+ inferior 1, the parent. Because libthread_db is already loaded for
+ the parent, thread_db_load early returns. check_for_thread_db later
+ gets called by linux_nat_target::follow_fork. At this point, the
+ current inferior is the correct one and the child's LWP exists, so
+ all is well.
+
+ Since we now call post_create_inferior after target_follow_fork, which
+ calls the inferior_created observable, which calls check_for_thread_db,
+ I don't think linux_nat_target needs to explicitly call
+ check_for_thread_db itself, so that is removed.
+
+ In terms of testing, this patch adds a new gdb.base/jit-elf-fork.exp
+ test. It makes an inferior register a JIT code object and then fork.
+ It then verifies that whatever the detach-on-fork and follow-fork-child
+ parameters are, GDB knows about the JIT code object in all the inferiors
+ that survive the fork. It verifies that the inferiors can unload that
+ code object.
+
+ There isn't currently a way to get visibility into GDB's idea of the JIT
+ code objects for each inferior. For the purpose of this test, add the
+ "maintenance info jit" command. There isn't much we can print about the
+ JIT code objects except their load address. So the output looks a bit
+ bare, but it's good enough for the test.
+
+ gdb/ChangeLog:
+
+ * NEWS: Mention "maint info jit" command.
+ * infrun.c (follow_fork_inferior): Don't call
+ solib_create_inferior_hook, call post_create_inferior if a new
+ inferior was created.
+ * jit.c (maint_info_jit_cmd): New.
+ (_initialize_jit): Register new command.
+ * linux-nat.c (linux_nat_target::follow_fork): Don't call
+ check_for_thread_db.
+ * linux-nat.h (check_for_thread_db): Remove declaration.
+ * linux-thread-db.c (check_thread_signals): Make static.
+
+ gdb/doc/ChangeLog:
+
+ * gdb.texinfo (Maintenance Commands): Mention "maint info jit".
+
+ gdb/testsuite/ChangeLog:
+
+ * gdb.base/jit-elf-fork-main.c: New test.
+ * gdb.base/jit-elf-fork-solib.c: New test.
+ * gdb.base/jit-elf-fork.exp: New test.
+
+ Change-Id: I9a192e55b8a451c00e88100669283fc9ca60de5c
+
+2021-07-15 Libor Bukata <libor.bukata@oracle.com>
+
+ [gdb/procfs.c] Fix build failure in find_stop_signal
+ It fixes a regression caused by commit
+ 1edb66d856c82c389edfd7610143236a68c76846 where thread_info::suspend was
+ made private.
+
+ The public thread_info API has to be used to get stop signal and avoid
+ build failures.
+
+ gdb/ChangeLog:
+
+ 2021-07-14 Libor Bukata <libor.bukata@oracle.com>
+
+ * gdb/procfs.c (find_stop_signal): Use thread_info API.
+
+ Change-Id: I53bc57a05cd0eca5f28ef0726d6faeeb306e7904
+
+2021-07-15 GDB Administrator <gdbadmin@sourceware.org>
+
+ Automatic date update in version.in
+
+2021-07-14 H.J. Lu <hjl.tools@gmail.com>
+
+ x86: Add int1 as one byte opcode 0xf1
+ Also change the x86 disassembler to disassemble 0xf1 as int1, instead of
+ icebp.
+
+ gas/
+
+ PR gas/28088
+ * testsuite/gas/i386/opcode.s: Add int1.
+ * testsuite/gas/i386/x86-64-opcode.s: Add int1, int3 and int.
+ * testsuite/gas/i386/opcode-intel.d: Updated.
+ * testsuite/gas/i386/opcode-suffix.d: Likewise.
+ * testsuite/gas/i386/opcode.d: Likewise.
+ * testsuite/gas/i386/x86-64-opcode.d: Likewise.
+
+ opcodes/
+
+ PR gas/28088
+ * i386-dis.c (dis386): Replace icebp with int1.
+ * i386-opc.tbl: Add int1.
+ * i386-tbl.h: Regenerate.
+
+2021-07-14 Alan Modra <amodra@gmail.com>
+
+ gas: default TC_VALIDATE_FIX_SUB to 0
+ gas/write.c provides a fallback TC_VALIDATE_FIX_SUB define that can be
+ a problem for some targets, the problem being that a non-zero
+ definition of TC_VALIDATE_FIX_SUB says that some uses of fx_subsy are
+ OK, in effect that the target will handle fx_subsy in md_apply_fix
+ and/or tc_gen_reloc. A lot of targets don't have the necessary
+ md_apply_fix and tc_gen_reloc support. So a safer default is to
+ disallow fx_subsy by default.
+
+ I've had a good look over target usage of fx_subsy, and think I've
+ caught all the cases where targets need TC_VALIDATE_FIX_SUB. Possible
+ failures would be limited to alpha, microblaze, ppc and s390 (the
+ targets that define UNDEFINED_DIFFERENCE_OK), or targets that generate
+ fixups with BFD_RELOC_GPREL32/16 and use a syntax explicitly showing
+ a difference expression.
+
+ * write.c (TC_VALIDATE_FIX_SUB): Default to 0.
+ * config/tc-hppa.h (TC_VALIDATE_FIX_SUB): Define.
+ * config/tc-microblaze.h (TC_VALIDATE_FIX_SUB): Define.
+ * config/tc-alpha.h (TC_VALIDATE_FIX_SUB): Define for ECOFF.
+ * config/tc-ppc.h (TC_VALIDATE_FIX_SUB): Don't define for ELF.
+ Do define for XCOFF.
+
+2021-07-14 Clément Chigot <clement.chigot@atos.net>
+
+ objdump: add DWARF support for AIX
+ DWARF sections have special names on AIX which need be handled
+ by objdump in order to correctly print them.
+ This patch also adds the correlation in bfd for future uses.
+
+ bfd/
+ * libxcoff.h (struct xcoff_dwsect_name): Add DWARF name.
+ * coff-rs6000.c (xcoff_dwsect_names): Update.
+ * coffcode.h (sec_to_styp_flags): Likewise.
+ (coff_new_section_hook): Likewise.
+ binutils/
+ * dwarf.h (struct dwarf_section): Add XCOFF name.
+ * dwarf.c (struct dwarf_section_display): Update.
+ * objdump.c (load_debug_section): Add XCOFF name handler.
+ (dump_dwarf_section): Likewise.
+ gas/
+ * config/tc-ppc.c (ppc_change_debug_section): Update to
+ match new name's field.
+
+2021-07-14 Tom de Vries <tdevries@suse.de>
+
+ [gdb/testsuite] Fix gdb.base/gold-gdb-index.exp
+ When running test-case gdb.base/gold-gdb-index.exp on openSUSE Tumbleweed,
+ I run into:
+ ...
+ FAIL: gdb.base/gold-gdb-index.exp: maint info symtabs
+ ...
+
+ This is due to a dummy .gdb_index:
+ ...
+ Contents of the .gdb_index section:
+
+ Version 7
+
+ CU table:
+
+ TU table:
+
+ Address table:
+
+ Symbol table:
+ ...
+
+ The dummy .gdb_index is ignored when loading the symbols, and instead partial
+ symbols are used. Consequently, we get the same result as if we'd removed
+ -Wl,--gdb-index from the compilation.
+
+ Presumably, gold fails to generate a proper .gdb_index because it lacks
+ DWARF5 support.
+
+ Anyway, without a proper .gdb_index we can't test the gdb behaviour we're
+ trying to excercise. Fix this by detecting whether we actually used a
+ .gdb_index for symbol loading.
+
+ Tested on x86_64-linux.
+
+ gdb/testsuite/ChangeLog:
+
+ 2021-07-14 Tom de Vries <tdevries@suse.de>
+
+ * lib/gdb.exp (have_index): New proc.
+ * gdb.base/gold-gdb-index.exp: Use have_index.
+
+2021-07-14 Tom de Vries <tdevries@suse.de>
+
+ [gdb/testsuite] Add missing skip_tui_tests
+ When building gdb with --disable-tui, we run into:
+ ...
+ (gdb) frame apply all -- -^M
+ Undefined command: "-". Try "help".^M
+ (gdb) ERROR: Undefined command "frame apply all -- -".
+ UNRESOLVED: gdb.base/options.exp: test-frame-apply: frame apply all -- -
+ ...
+
+ Fix this by detecting whether tui is supported, and skipping the tui-related
+ tests otherwise. Same in some gdb.tui test-cases.
+
+ Tested on x86_64-linux.
+
+ gdb/testsuite/ChangeLog:
+
+ 2021-07-13 Tom de Vries <tdevries@suse.de>
+
+ * gdb.base/options.exp: Skip tui-related tests when tui is not
+ supported.
+ * gdb.python/tui-window-disabled.exp: Same.
+ * gdb.python/tui-window.exp: Same.
+
+2021-07-14 GDB Administrator <gdbadmin@sourceware.org>
+
+ Automatic date update in version.in
+
+2021-07-13 Lancelot SIX <lsix@lancelotsix.com>
+
+ Use /bin/sh as shebang in gdb/make-init-c
+ While testing the NixOS[1] packaging for gdb-11.0.90.tar.xz, I got the
+ following error:
+
+ [...]
+ CXX aarch32-tdep.o
+ CXX gdb.o
+ GEN init.c
+ /nix/store/26a78ync552m8j4sbjavhvkmnqir8c9y-bash-4.4-p23/bin/bash: ./make-init-c: /usr/bin/env: bad interpreter: No such file or directory
+ make[2]: *** [Makefile:1866: stamp-init] Error 126
+ make[2]: *** Waiting for unfinished jobs....
+ make[2]: Leaving directory '/build/gdb-11.0.90/gdb'
+ make[1]: *** [Makefile:9814: all-gdb] Error 2
+ make[1]: Leaving directory '/build/gdb-11.0.90'
+ make: *** [Makefile:903: all] Error 2
+ builder for '/nix/store/xs8my3rrc3l4kdlbpx0azh6q0v0jxphr-gdb-gdb-11.0.90.drv' failed with exit code 2
+ error: build of '/nix/store/xs8my3rrc3l4kdlbpx0azh6q0v0jxphr-gdb-gdb-11.0.90.drv' failed
+
+ In the nix build environment, /usr/bin/env is not present, only /bin/sh
+ is. This patch makes sure that gdb/make-init-c uses '/bin/sh' as
+ interpreter as this is the only one available on this platform.
+
+ I do not think this change will cause regressions on any other
+ configuration.
+
+ [1] https://nixos.org/
+
+ gdb/Changelog
+
+ * make-init-c: Use /bin/sh as shebang.
+
+2021-07-13 John Baldwin <jhb@FreeBSD.org>
+
+ arm-fbsd-nat: Use fetch_register_set and store_register_set.
+
+ aarch64-fbsd-nat: Use fetch_register_set and store_register_set.
+
+ riscv-fbsd-nat: Use fetch_register_set and store_register_set.
+
+ fbsd-nat: Add helper functions to fetch and store register sets.
+ In particular, this supports register sets described by a regcache_map
+ which are fetched and stored with dedicated ptrace operations. These
+ functions are intended to be used in architecture-specific
+ fetch_registers and store_registers target methods.
+
+ Add regcache_map_supplies helper routine.
+ This helper can be used in the fetch_registers and store_registers
+ target methods to determine if a register set includes a specific
+ register.
+
+2021-07-13 Pedro Alves <pedro@palves.net>
+
+ Avoid letting exceptions escape gdb_bfd_iovec_fileio_close (PR gdb/28080)
+ Before PR gdb/28080 was fixed by the previous patch, GDB was crashing
+ like this:
+
+ (gdb) detach
+ Detaching from program: target:/any/program, process 3671843
+ Detaching from process 3671843
+ Ending remote debugging.
+ [Inferior 1 (process 3671843) detached]
+ In main
+ terminate called after throwing an instance of 'gdb_exception_error'
+ Aborted (core dumped)
+
+ Here's the exception above being thrown:
+
+ (top-gdb) bt
+ #0 throw_error (error=TARGET_CLOSE_ERROR, fmt=0x555556035588 "Remote connection closed") at src/gdbsupport/common-exceptions.cc:222
+ #1 0x0000555555bbaa46 in remote_target::readchar (this=0x555556a11040, timeout=10000) at src/gdb/remote.c:9440
+ #2 0x0000555555bbb9e5 in remote_target::getpkt_or_notif_sane_1 (this=0x555556a11040, buf=0x555556a11058, forever=0, expecting_notif=0, is_notif=0x0) at src/gdb/remote.c:9928
+ #3 0x0000555555bbbda9 in remote_target::getpkt_sane (this=0x555556a11040, buf=0x555556a11058, forever=0) at src/gdb/remote.c:10030
+ #4 0x0000555555bc0e75 in remote_target::remote_hostio_send_command (this=0x555556a11040, command_bytes=13, which_packet=14, remote_errno=0x7fffffffcfd0, attachment=0x0, attachment_len=0x0) at src/gdb/remote.c:12137
+ #5 0x0000555555bc1b6c in remote_target::remote_hostio_close (this=0x555556a11040, fd=8, remote_errno=0x7fffffffcfd0) at src/gdb/remote.c:12455
+ #6 0x0000555555bc1bb4 in remote_target::fileio_close (During symbol reading: .debug_line address at offset 0x64f417 is 0 [in module build/gdb/gdb]
+ this=0x555556a11040, fd=8, remote_errno=0x7fffffffcfd0) at src/gdb/remote.c:12462
+ #7 0x0000555555c9274c in target_fileio_close (fd=3, target_errno=0x7fffffffcfd0) at src/gdb/target.c:3365
+ #8 0x000055555595a19d in gdb_bfd_iovec_fileio_close (abfd=0x555556b9f8a0, stream=0x555556b11530) at src/gdb/gdb_bfd.c:439
+ #9 0x0000555555e09e3f in opncls_bclose (abfd=0x555556b9f8a0) at src/bfd/opncls.c:599
+ #10 0x0000555555e0a2c7 in bfd_close_all_done (abfd=0x555556b9f8a0) at src/bfd/opncls.c:847
+ #11 0x0000555555e0a27a in bfd_close (abfd=0x555556b9f8a0) at src/bfd/opncls.c:814
+ #12 0x000055555595a9d3 in gdb_bfd_close_or_warn (abfd=0x555556b9f8a0) at src/gdb/gdb_bfd.c:626
+ #13 0x000055555595ad29 in gdb_bfd_unref (abfd=0x555556b9f8a0) at src/gdb/gdb_bfd.c:715
+ #14 0x0000555555ae4730 in objfile::~objfile (this=0x555556515540, __in_chrg=<optimized out>) at src/gdb/objfiles.c:573
+ #15 0x0000555555ae955a in std::_Sp_counted_ptr<objfile*, (__gnu_cxx::_Lock_policy)2>::_M_dispose (this=0x555556c20db0) at /usr/include/c++/9/bits/shared_ptr_base.h:377
+ #16 0x000055555572b7c8 in std::_Sp_counted_base<(__gnu_cxx::_Lock_policy)2>::_M_release (this=0x555556c20db0) at /usr/include/c++/9/bits/shared_ptr_base.h:155
+ #17 0x00005555557263c3 in std::__shared_count<(__gnu_cxx::_Lock_policy)2>::~__shared_count (this=0x555556bf0588, __in_chrg=<optimized out>) at /usr/include/c++/9/bits/shared_ptr_base.h:730
+ #18 0x0000555555ae745e in std::__shared_ptr<objfile, (__gnu_cxx::_Lock_policy)2>::~__shared_ptr (this=0x555556bf0580, __in_chrg=<optimized out>) at /usr/include/c++/9/bits/shared_ptr_base.h:1169
+ #19 0x0000555555ae747e in std::shared_ptr<objfile>::~shared_ptr (this=0x555556bf0580, __in_chrg=<optimized out>) at /usr/include/c++/9/bits/shared_ptr.h:103
+ #20 0x0000555555b1c1dc in __gnu_cxx::new_allocator<std::_List_node<std::shared_ptr<objfile> > >::destroy<std::shared_ptr<objfile> > (this=0x5555564cdd60, __p=0x555556bf0580) at /usr/include/c++/9/ext/new_allocator.h:153
+ #21 0x0000555555b1bb1d in std::allocator_traits<std::allocator<std::_List_node<std::shared_ptr<objfile> > > >::destroy<std::shared_ptr<objfile> > (__a=..., __p=0x555556bf0580) at /usr/include/c++/9/bits/alloc_traits.h:497
+ #22 0x0000555555b1b73e in std::__cxx11::list<std::shared_ptr<objfile>, std::allocator<std::shared_ptr<objfile> > >::_M_erase (this=0x5555564cdd60, __position=std::shared_ptr<objfile> (expired, weak count 1) = {get() = 0x555556515540}) at /usr/include/c++/9/bits/stl_list.h:1921
+ #23 0x0000555555b1afeb in std::__cxx11::list<std::shared_ptr<objfile>, std::allocator<std::shared_ptr<objfile> > >::erase (this=0x5555564cdd60, __position=std::shared_ptr<objfile> (expired, weak count 1) = {get() = 0x555556515540}) at /usr/include/c++/9/bits/list.tcc:158
+ #24 0x0000555555b19576 in program_space::remove_objfile (this=0x5555564cdd20, objfile=0x555556515540) at src/gdb/progspace.c:210
+ #25 0x0000555555ae4502 in objfile::unlink (this=0x555556515540) at src/gdb/objfiles.c:487
+ #26 0x0000555555ae5a12 in objfile_purge_solibs () at src/gdb/objfiles.c:875
+ #27 0x0000555555c09686 in no_shared_libraries (ignored=0x0, from_tty=1) at src/gdb/solib.c:1236
+ #28 0x00005555559e3f5f in detach_command (args=0x0, from_tty=1) at src/gdb/infcmd.c:2769
+
+ Note frame #14:
+
+ #14 0x0000555555ae4730 in objfile::~objfile (this=0x555556515540, __in_chrg=<optimized out>) at src/gdb/objfiles.c:573
+
+ That's a dtor, thus noexcept. That's the reason for the
+ std::terminate.
+
+ The previous patch fixed things such that the exception above isn't
+ thrown anymore. However, it's possible that e.g., the remote
+ connection drops just while a user types "nosharedlibrary", or some
+ other reason that leads to objfile::~objfile, and then we end up the
+ same std::terminate problem.
+
+ Also notice that frames #9-#11 are BFD frames:
+
+ #9 0x0000555555e09e3f in opncls_bclose (abfd=0x555556bc27e0) at src/bfd/opncls.c:599
+ #10 0x0000555555e0a2c7 in bfd_close_all_done (abfd=0x555556bc27e0) at src/bfd/opncls.c:847
+ #11 0x0000555555e0a27a in bfd_close (abfd=0x555556bc27e0) at src/bfd/opncls.c:814
+
+ BFD is written in C and thus throwing exceptions over such frames may
+ either not clean up properly, or, may abort if bfd is not compiled
+ with -fasynchronous-unwind-tables (x86-64 defaults that on, but not
+ all GCC ports do).
+
+ Thus frame #8 seems like a good place to swallow exceptions. More so
+ since in this spot we already ignore target_fileio_close return
+ errors. That's what this commit does. Without the previous fix, we'd
+ see:
+
+ (gdb) detach
+ Detaching from program: target:/any/program, process 2197701
+ Ending remote debugging.
+ [Inferior 1 (process 2197701) detached]
+ warning: cannot close "target:/lib64/ld-linux-x86-64.so.2": Remote connection closed
+
+ Note it prints a warning, which would still be a regression compared
+ to GDB 10, if it weren't for the previous fix.
+
+ gdb/ChangeLog:
+ yyyy-mm-dd Pedro Alves <pedro@palves.net>
+
+ PR gdb/28080
+ * gdb_bfd.c (gdb_bfd_close_warning): New.
+ (gdb_bfd_iovec_fileio_close): Wrap target_fileio_close in
+ try/catch and print warning on exception.
+ (gdb_bfd_close_or_warn): Use gdb_bfd_close_warning.
+
+ Change-Id: Ic7a26ddba0a4444e3377b0e7c1c89934a84545d7
+
+2021-07-13 Pedro Alves <pedro@palves.net>
+
+ Fix detach with target remote (PR gdb/28080)
+ Commit 408f66864a1a823591b26420410c982174c239a2 ("detach in all-stop
+ with threads running") regressed "detach" with "target remote":
+
+ (gdb) detach
+ Detaching from program: target:/any/program, process 3671843
+ Detaching from process 3671843
+ Ending remote debugging.
+ [Inferior 1 (process 3671843) detached]
+ In main
+ terminate called after throwing an instance of 'gdb_exception_error'
+ Aborted (core dumped)
+
+ Here's the exception above being thrown:
+
+ (top-gdb) bt
+ #0 throw_error (error=TARGET_CLOSE_ERROR, fmt=0x555556035588 "Remote connection closed") at src/gdbsupport/common-exceptions.cc:222
+ #1 0x0000555555bbaa46 in remote_target::readchar (this=0x555556a11040, timeout=10000) at src/gdb/remote.c:9440
+ #2 0x0000555555bbb9e5 in remote_target::getpkt_or_notif_sane_1 (this=0x555556a11040, buf=0x555556a11058, forever=0, expecting_notif=0, is_notif=0x0) at src/gdb/remote.c:9928
+ #3 0x0000555555bbbda9 in remote_target::getpkt_sane (this=0x555556a11040, buf=0x555556a11058, forever=0) at src/gdb/remote.c:10030
+ #4 0x0000555555bc0e75 in remote_target::remote_hostio_send_command (this=0x555556a11040, command_bytes=13, which_packet=14, remote_errno=0x7fffffffcfd0, attachment=0x0, attachment_len=0x0) at src/gdb/remote.c:12137
+ #5 0x0000555555bc1b6c in remote_target::remote_hostio_close (this=0x555556a11040, fd=8, remote_errno=0x7fffffffcfd0) at src/gdb/remote.c:12455
+ #6 0x0000555555bc1bb4 in remote_target::fileio_close (During symbol reading: .debug_line address at offset 0x64f417 is 0 [in module build/gdb/gdb]
+ this=0x555556a11040, fd=8, remote_errno=0x7fffffffcfd0) at src/gdb/remote.c:12462
+ #7 0x0000555555c9274c in target_fileio_close (fd=3, target_errno=0x7fffffffcfd0) at src/gdb/target.c:3365
+ #8 0x000055555595a19d in gdb_bfd_iovec_fileio_close (abfd=0x555556b9f8a0, stream=0x555556b11530) at src/gdb/gdb_bfd.c:439
+ #9 0x0000555555e09e3f in opncls_bclose (abfd=0x555556b9f8a0) at src/bfd/opncls.c:599
+ #10 0x0000555555e0a2c7 in bfd_close_all_done (abfd=0x555556b9f8a0) at src/bfd/opncls.c:847
+ #11 0x0000555555e0a27a in bfd_close (abfd=0x555556b9f8a0) at src/bfd/opncls.c:814
+ #12 0x000055555595a9d3 in gdb_bfd_close_or_warn (abfd=0x555556b9f8a0) at src/gdb/gdb_bfd.c:626
+ #13 0x000055555595ad29 in gdb_bfd_unref (abfd=0x555556b9f8a0) at src/gdb/gdb_bfd.c:715
+ #14 0x0000555555ae4730 in objfile::~objfile (this=0x555556515540, __in_chrg=<optimized out>) at src/gdb/objfiles.c:573
+ #15 0x0000555555ae955a in std::_Sp_counted_ptr<objfile*, (__gnu_cxx::_Lock_policy)2>::_M_dispose (this=0x555556c20db0) at /usr/include/c++/9/bits/shared_ptr_base.h:377
+ #16 0x000055555572b7c8 in std::_Sp_counted_base<(__gnu_cxx::_Lock_policy)2>::_M_release (this=0x555556c20db0) at /usr/include/c++/9/bits/shared_ptr_base.h:155
+ #17 0x00005555557263c3 in std::__shared_count<(__gnu_cxx::_Lock_policy)2>::~__shared_count (this=0x555556bf0588, __in_chrg=<optimized out>) at /usr/include/c++/9/bits/shared_ptr_base.h:730
+ #18 0x0000555555ae745e in std::__shared_ptr<objfile, (__gnu_cxx::_Lock_policy)2>::~__shared_ptr (this=0x555556bf0580, __in_chrg=<optimized out>) at /usr/include/c++/9/bits/shared_ptr_base.h:1169
+ #19 0x0000555555ae747e in std::shared_ptr<objfile>::~shared_ptr (this=0x555556bf0580, __in_chrg=<optimized out>) at /usr/include/c++/9/bits/shared_ptr.h:103
+ #20 0x0000555555b1c1dc in __gnu_cxx::new_allocator<std::_List_node<std::shared_ptr<objfile> > >::destroy<std::shared_ptr<objfile> > (this=0x5555564cdd60, __p=0x555556bf0580) at /usr/include/c++/9/ext/new_allocator.h:153
+ #21 0x0000555555b1bb1d in std::allocator_traits<std::allocator<std::_List_node<std::shared_ptr<objfile> > > >::destroy<std::shared_ptr<objfile> > (__a=..., __p=0x555556bf0580) at /usr/include/c++/9/bits/alloc_traits.h:497
+ #22 0x0000555555b1b73e in std::__cxx11::list<std::shared_ptr<objfile>, std::allocator<std::shared_ptr<objfile> > >::_M_erase (this=0x5555564cdd60, __position=std::shared_ptr<objfile> (expired, weak count 1) = {get() = 0x555556515540}) at /usr/include/c++/9/bits/stl_list.h:1921
+ #23 0x0000555555b1afeb in std::__cxx11::list<std::shared_ptr<objfile>, std::allocator<std::shared_ptr<objfile> > >::erase (this=0x5555564cdd60, __position=std::shared_ptr<objfile> (expired, weak count 1) = {get() = 0x555556515540}) at /usr/include/c++/9/bits/list.tcc:158
+ #24 0x0000555555b19576 in program_space::remove_objfile (this=0x5555564cdd20, objfile=0x555556515540) at src/gdb/progspace.c:210
+ #25 0x0000555555ae4502 in objfile::unlink (this=0x555556515540) at src/gdb/objfiles.c:487
+ #26 0x0000555555ae5a12 in objfile_purge_solibs () at src/gdb/objfiles.c:875
+ #27 0x0000555555c09686 in no_shared_libraries (ignored=0x0, from_tty=1) at src/gdb/solib.c:1236
+ #28 0x00005555559e3f5f in detach_command (args=0x0, from_tty=1) at src/gdb/infcmd.c:2769
+
+ So frame #28 already detached the remote process, and then we're
+ purging the shared libraries. GDB had opened remote shared libraries
+ via the target: sysroot, so it tries closing them. GDBserver is
+ tearing down already, so remote communication breaks down and we close
+ the remote target and throw TARGET_CLOSE_ERROR.
+
+ Note frame #14:
+
+ #14 0x0000555555ae4730 in objfile::~objfile (this=0x555556515540, __in_chrg=<optimized out>) at src/gdb/objfiles.c:573
+
+ That's a dtor, thus noexcept. That's the reason for the
+ std::terminate.
+
+ Stepping back a bit, why do we still have open remote files if we've
+ managed to detach already, and, we're debugging with "target remote"?
+ The reason is that commit 408f66864a1a823591b26420410c982174c239a2
+ makes detach_command hold a reference to the target, so the remote
+ target won't be finally closed until frame #28 returns. It's closing
+ the target that invalidates target file I/O handles.
+
+ This commit fixes the issue by not relying on target_close to
+ invalidate the target file I/O handles, instead invalidate them
+ immediately in remote_unpush_target. So when GDB purges the solibs,
+ and we end up in target_fileio_close (frame #7 above), there's nothing
+ to do, and we don't try to talk with the remote target anymore.
+
+ The regression isn't seen when testing with
+ --target_board=native-gdbserver, because that does "set sysroot" to
+ disable the "target:" sysroot, for test run speed reasons. So this
+ commit adds a testcase that explicitly tests detach with "set sysroot
+ target:".
+
+ gdb/ChangeLog:
+ yyyy-mm-dd Pedro Alves <pedro@palves.net>
+
+ PR gdb/28080
+ * remote.c (remote_unpush_target): Invalidate file I/O target
+ handles.
+ * target.c (fileio_handles_invalidate_target): Make extern.
+ * target.h (fileio_handles_invalidate_target): Declare.
+
+ gdb/testsuite/ChangeLog:
+ yyyy-mm-dd Pedro Alves <pedro@palves.net>
+
+ PR gdb/28080
+ * gdb.base/detach-sysroot-target.exp: New.
+ * gdb.base/detach-sysroot-target.c: New.
+
+ Reported-By: Jonah Graham <jonah@kichwacoders.com>
+
+ Change-Id: I851234910172f42a1b30e731161376c344d2727d
+
+2021-07-13 Tom de Vries <tdevries@suse.de>
+
+ [gdb/testsuite] Fix check-libthread-db.exp FAILs with glibc 2.33
+ When running test-case gdb.threads/check-libthread-db.exp on openSUSE
+ Tumbleweed with glibc 2.33, I get:
+ ...
+ (gdb) maint check libthread-db^M
+ Running libthread_db integrity checks:^M
+ Got thread 0x7ffff7c79b80 => 9354 => 0x7ffff7c79b80; errno = 0 ... OK^M
+ libthread_db integrity checks passed.^M
+ (gdb) FAIL: gdb.threads/check-libthread-db.exp: user-initiated check: \
+ libpthread.so not initialized (pattern 2)
+ ...
+
+ The test-case expects instead:
+ ...
+ Got thread 0x0 => 9354 => 0x0 ... OK^M
+ ...
+ which is what I get on openSUSE Leap 15.2 with glibc 2.26, and what is
+ described in the test-case like this:
+ ...
+ # libthread_db should fake a single thread with th_unique == NULL.
+ ...
+
+ Using a breakpoint on check_thread_db_callback we can compare the two
+ scenarios, and find that in the latter case we hit this code in glibc function
+ iterate_thread_list in nptl_db/td_ta_thr_iter.c:
+ ...
+ if (next == 0 && fake_empty)
+ {
+ /* __pthread_initialize_minimal has not run. There is just the main
+ thread to return. We cannot rely on its thread register. They
+ sometimes contain garbage that would confuse us, left by the
+ kernel at exec. So if it looks like initialization is incomplete,
+ we only fake a special descriptor for the initial thread. */
+ td_thrhandle_t th = { ta, 0 };
+ return callback (&th, cbdata_p) != 0 ? TD_DBERR : TD_OK;
+ }
+ ...
+ while in the former case we don't because this preceding statement doesn't
+ result in next == 0:
+ ...
+ err = DB_GET_FIELD (next, ta, head, list_t, next, 0);
+ ...
+
+ Note that the comment mentions __pthread_initialize_minimal, but in both cases
+ it has already run before we hit the callback, so it's possible the comment is
+ no longer accurate.
+
+ The change in behaviour bisect to glibc commit 1daccf403b "nptl: Move stack
+ list variables into _rtld_global", which moves the initialization of stack
+ list variables such as __stack_user to an earlier moment, which explains well
+ enough the observed difference.
+
+ Fix this by updating the regexp patterns to agree with what libthread-db is
+ telling us.
+
+ Tested on x86_64-linux, both with glibc 2.33 and 2.26.
+
+ gdb/testsuite/ChangeLog:
+
+ 2021-07-07 Tom de Vries <tdevries@suse.de>
+
+ PR testsuite/27690
+ * gdb.threads/check-libthread-db.exp: Update patterns for glibc 2.33.
+
+2021-07-13 Felix Willgerodt <felix.willgerodt@intel.com>
+
+ gdb, dwarf: Don't follow the parent of a subprogram to get a prefix.
+ During prefix resolution, if the parent is a subprogram, there is no need
+ to go to the parent of the subprogram. The DIE will be local.
+
+ For a program like:
+ ~~~
+ class F1
+ {
+ public:
+ int a;
+ int
+ vvv ()
+ {
+ class F2
+ {
+ int f;
+ };
+ F2 abcd;
+ return 1;
+ }
+ };
+ ~~~
+
+ The class F2 should not be seen as a member of F1.
+
+ Before:
+ ~~~
+ (gdb) ptype abcd
+ type = class F1::F2 {
+ private:
+ int f;
+ }
+ ~~~
+
+ After:
+ ~~~
+ (gdb) ptype abcd
+ type = class F2 {
+ private:
+ int f;
+ }
+ ~~~
+
+ gdb/ChangeLog:
+ 2021-06-23 Felix Willgerodt <felix.willgerodt@intel.com>
+
+ * dwarf2/read.c (determine_prefix): Return an empty prefix if the
+ parent is a subprogram.
+
+ gdb/testsuite/ChangeLog:
+ 2021-06-23 Felix Willgerodt <felix.willgerodt@intel.com>
+
+ * gdb.cp/nested-class-func-class.cc: New file.
+ * gdb.cp/nested-class-func-class.exp: New file.
+
+2021-07-13 Simon Marchi <simon.marchi@polymtl.ca>
+
+ gdb: disable commit-resumed on -exec-interrupt --thread-group
+ As reported in PR gdb/28077, we hit an internal error when using
+ -exec-interrupt with --thread-group:
+
+ info threads
+ &"info threads\n"
+ ~" Id Target Id Frame \n"
+ ~"* 1 process 403312 \"loop\" (running)\n"
+ ^done
+ (gdb)
+ -exec-interrupt --thread-group i1
+ ~"/home/simark/src/binutils-gdb/gdb/target.c:3768: internal-error: void target_stop(ptid_t): Assertion `!proc_target->commit_resumed_state' failed.\nA problem internal to GDB has been detected,\nfurther debugging may prove unreliable.\nQuit this debugging session? (y or n) "
+
+ This is because this code path never disables commit-resumed (a
+ requirement for calling target_stop, as documented in
+ process_stratum_target::»commit_resumed_state) before calling
+ target_stop.
+
+ The other 3 code paths in mi_cmd_exec_interrupt use interrupt_target_1,
+ which does it. But the --thread-group code path uses its own thing
+ which doesn't do it. Fix this by adding a scoped_disable_commit_resumed
+ in this code path.
+
+ Calling -exec-interrupt with --thread-group is apparently not tested at
+ the moment (which is why this bug could creep in). Add a new test for
+ that. The test runs two inferiors and tries to interrupt them with
+ "-exec-interrupt --thread-group X".
+
+ This will need to be merged in the gdb-11-branch, so here are ChangeLog
+ entries:
+
+ gdb/ChangeLog:
+
+ * mi/mi-main.c (mi_cmd_exec_interrupt): Use
+ scoped_disable_commit_resumed in the --thread-group case.
+
+ gdb/testsuite/ChangeLog:
+
+ * gdb.mi/interrupt-thread-group.c: New.
+ * gdb.mi/interrupt-thread-group.exp: New.
+
+ Bug: https://sourceware.org/bugzilla/show_bug.cgi?id=28077
+ Change-Id: I615efefcbcaf2c15d47caf5e4b9d82854b2a2fcb
+
+2021-07-13 Nelson Chu <nelson.chu@sifive.com>
+
+ RISC-V: Enable elf attributes when default configure option isn't set.
+ Since gcc commit, 3c70b3ca1ef58f302bf8c16d9e7c7bb8626408bf, we now enable
+ elf attributes for all riscv targets by default in gcc. Therefore, I
+ think binutils should have the same behavior, in case users are writing
+ assembly files. If --enable-default-riscv-attribute isn't set, then we
+ enable the elf attributes for all riscv targets by default.
+
+ ChangLog:
+
+ binutils/
+
+ * testsuite/binutils-all/readelf.s: Add comments for riscv.
+ * testsuite/binutils-all/readelf.s-64: Likewise.
+ * testsuite/binutils-all/readelf.s-64-unused: Likewise.
+ * testsuite/binutils-all/readelf.ss: Likewise.
+ * testsuite/binutils-all/readelf.ss-64: Likewise.
+ * testsuite/binutils-all/readelf.ss-64-unused: Likewise.
+
+ gas/
+
+ * configure.ac: If --enable-default-riscv-attribute isn't set,
+ then we enable the elf attributes for all riscv targets by
+ default.
+ * configure: Regenerated.
+
+2021-07-13 John Ericson <git@JohnEricson.me>
+
+ Fix some dangling references to `netbsd-tdep`
+ These files were renamed in 1b71cfcfdc3e13a655fefa6566b5564cec044c10,
+ but evidentially a few dangling references were left behind. This causes
+ builds to fail:
+
+ $ ./configure --target i686-netbsdelf
+ $ make
+ make: *** No rule to make target 'nbsd-tdep.c', needed by 'nbsd-tdep.o'. Stop.
+
+2021-07-13 Simon Marchi <simon.marchi@polymtl.ca>
+
+ gdb: optimize all_matching_threads_iterator
+ all_matching_threads_iterator is used extensively in some pretty fast
+ paths, often under the all_non_exited_threads function.
+
+ If a filter target and thread-specific ptid are given, it iterates on
+ all threads of all inferiors of that target, to ultimately yield exactly
+ on thread. And this happens quite often, which means we unnecessarily
+ spend time iterating on threads to find the one we are looking for. The
+ same thing happens if an inferior-specific ptid is given, although there
+ the iterator yields all the threads of that inferior.
+
+ In those cases, the callers of all_non_exited_threads could have
+ different behaviors depending on the kind of ptid, to avoid this
+ inefficiency, but that would be very tedious. Using
+ all_non_exited_threads has the advantage that one simple implementation
+ can work seamlessly on multiple threads or on one specific thread, just
+ by playing with the ptid.
+
+ Instead, optimize all_matching_threads_iterator directly to detect these
+ different cases and limiting what we iterate on to just what we need.
+
+ - if filter_ptid is minus_one_ptid, do as we do now: filter inferiors
+ based on filter_target, iterate on all of the matching inferiors'
+ threads
+ - if filter_ptid is a pid-only ptid (then a filter_target must
+ necessarily be given), look up that inferior and iterate on all its
+ threads
+ - otherwise, filter_ptid is a thread-specific ptid, so look up that
+ specific thread and "iterate" only on it
+
+ For the last case, what was an iteration on all threads of the filter
+ target now becomes a call to find_thread_ptid, which is quite efficient
+ now thanks to inferior::ptid_thread_map.
+
+ gdb/ChangeLog:
+
+ * thread-iter.h (class all_matching_threads_iterator)
+ <all_matching_threads_iterator>: Use default.
+ <enum class mode>: New.
+ <m_inf, m_thr>: Initialize.
+ <m_filter_ptid>: Remove.
+ * thread-iter.c (all_matching_threads_iterator::m_inf_matches):
+ Don't filter on m_filter_ptid.
+ (all_matching_threads_iterator::all_matching_threads_iterator):
+ Choose path based on filter_ptid (all threads, all threads of
+ inferior, single thread).
+ (all_matching_threads_iterator::advance): Likewise.
+
+ Change-Id: Ic6a19845f5f760fa1b8eac8145793c0ff431bbc9
+
+2021-07-13 Simon Marchi <simon.marchi@polymtl.ca>
+
+ gdb: maintain ptid -> thread map, optimize find_thread_ptid
+ When debugging a large number of threads (thousands), looking up a
+ thread by ptid_t using the inferior::thread_list linked list can add up.
+
+ Add inferior::thread_map, an std::unordered_map indexed by ptid_t, and
+ change the find_thread_ptid function to look up a thread using
+ std::unordered_map::find, instead of iterating on all of the
+ inferior's threads. This should make it faster to look up a thread
+ from its ptid.
+
+ Change-Id: I3a8da0a839e18dee5bb98b8b7dbeb7f3dfa8ae1c
+ Co-Authored-By: Pedro Alves <pedro@palves.net>
+
+2021-07-13 Simon Marchi <simon.marchi@polymtl.ca>
+
+ gdb: optimize selection of resumed thread with pending event
+ Consider a case where many threads (thousands) keep hitting a breakpoint
+ whose condition evaluates to false. random_pending_event_thread is
+ responsible for selecting a thread from an inferior among all that are
+ resumed with a pending wait status. It is currently implemented by
+ walking the inferior's thread list twice: once to count the number of
+ candidates and once to select a random one.
+
+ Since we now maintain a per target list of resumed threads with pending
+ event, we can implement this more efficiently by walking that list and
+ selecting the first thread that matches the criteria
+ (random_pending_event_thread looks for an thread from a specific
+ inferior, and possibly a filter ptid). It will be faster especially in
+ the common case where there isn't any resumed thread with pending
+ event. Currently, we have to iterate the thread list to figure this
+ out. With this patch, the list of resumed threads with pending event
+ will be empty, so it's quick to figure out.
+
+ The random selection is kept, but is moved to
+ process_stratum_target::random_resumed_with_pending_wait_status. The
+ same technique is used: do a first pass to count the number of
+ candidates, and do a second pass to select a random one. But given that
+ the list of resumed threads with pending wait statuses will generally be
+ short, or at least shorter than the full thread list, it should be
+ quicker.
+
+ Note that this isn't completely true, in case there are multiple
+ inferiors on the same target. Imagine that inferior A has 10k resumed
+ threads with pending wait statuses, and random_pending_event_thread is
+ called with inferior B. We'll need to go through the list that contains
+ inferior A's threads to realize that inferior B has no resumed threads
+ with pending wait status. But I think that this is a corner /
+ pathological case. And a possible fix for this situation would be to
+ make random_pending_event_thread work per-process-target, rather than
+ per-inferior.
+
+ Change-Id: I1b71d01beaa500a148b5b9797745103e13917325
+
+2021-07-13 Simon Marchi <simon.marchi@polymtl.ca>
+
+ gdb: optimize check for resumed threads with pending wait status in maybe_set_commit_resumed_all_targets
+ Consider a test case where many threads (thousands) keep hitting a
+ breakpoint whose condition evaluates to false.
+ maybe_set_commit_resumed_all_targets is called at each handled event,
+ when the scoped_disable_commit_resumed object in fetch_inferior_event is
+ reset_and_commit-ed. One particularly expensive check in there is
+ whether the target has at least one resumed thread with a pending wait
+ status (in which case, we don't want to commit the resumed threads, as
+ we want to consume this status first). It is currently implemented as
+ walking all threads of the target.
+
+ Since we now maintain a per-target list of resumed threads with pending
+ status, we can do this check efficiently, by checking whether that list
+ is empty or not.
+
+ Add the process_stratum_target::has_resumed_with_pending_wait_status
+ method for this, and use it in maybe_set_commit_resumed_all_targets.
+
+ Change-Id: Ia1595baa1b358338f94fc3cb3af7f27092dad5b6
+
+2021-07-13 Simon Marchi <simon.marchi@polymtl.ca>
+
+ gdb: maintain per-process-target list of resumed threads with pending wait status
+ Looking up threads that are both resumed and have a pending wait
+ status to report is something that we do quite often in the fast path
+ and is expensive if there are many threads, since it currently requires
+ walking whole thread lists.
+
+ The first instance is in maybe_set_commit_resumed_all_targets. This is
+ called after handling each event in fetch_inferior_event, to see if we
+ should ask targets to commit their resumed threads or not. If at least
+ one thread is resumed but has a pending wait status, we don't ask the
+ targets to commit their resumed threads, because we want to consume and
+ handle the pending wait status first.
+
+ The second instance is in random_pending_event_thread, where we want to
+ select a random thread among all those that are resumed and have a
+ pending wait status. This is called every time we try to consume
+ events, to see if there are any pending events that we we want to
+ consume, before asking the targets for more events.
+
+ To allow optimizing these cases, maintain a per-process-target list of
+ threads that are resumed and have a pending wait status.
+
+ In maybe_set_commit_resumed_all_targets, we'll be able to check in O(1)
+ if there are any such threads simply by checking whether the list is
+ empty.
+
+ In random_pending_event_thread, we'll be able to use that list, which
+ will be quicker than iterating the list of threads, especially when
+ there are no resumed with pending wait status threads.
+
+ About implementation details: using the new setters on class
+ thread_info, it's relatively easy to maintain that list. Any time the
+ "resumed" or "pending wait status" property is changed, we check whether
+ that should cause the thread to be added or removed from the list.
+
+ In set_thread_exited, we try to remove the thread from the list, because
+ keeping an exited thread in that list would make no sense (especially if
+ the thread is freed). My first implementation assumed that a process
+ stratum target was always present when set_thread_exited is called.
+ That's however, not the case: in some cases, targets unpush themselves
+ from an inferior and then call "exit_inferior", which exits all the
+ threads. If the target is unpushed before set_thread_exited is called
+ on the threads, it means we could mistakenly leave some threads in the
+ list. I tried to see how hard it would be to make it such that targets
+ have to exit all threads before unpushing themselves from the inferior
+ (that would seem logical to me, we don't want threads belonging to an
+ inferior that has no process target). That seemed quite difficult and
+ not worth the time at the moment. Instead, I changed
+ inferior::unpush_target to remove all threads of that inferior from the
+ list.
+
+ As of this patch, the list is not used, this is done in the subsequent
+ patches.
+
+ The debug messages in process-stratum-target.c need to print some ptids.
+ However, they can't use target_pid_to_str to print them without
+ introducing a dependency on the current inferior (the current inferior
+ is used to get the current target stack). For debug messages, I find it
+ clearer to print the spelled out ptid anyway (the pid, lwp and tid
+ values). Add a ptid_t::to_string method that returns a string
+ representation of the ptid that is meant for debug messages, a bit like
+ we already have frame_id::to_string.
+
+ Change-Id: Iad8f93db2d13984dd5aa5867db940ed1169dbb67
+
+2021-07-13 Simon Marchi <simon.marchi@polymtl.ca>
+
+ gdb: make thread_info::suspend private, add getters / setters
+ A following patch will want to take some action when a pending wait
+ status is set on or removed from a thread. Add a getter and a setter on
+ thread_info for the pending waitstatus, so that we can add some code in
+ the setter later.
+
+ The thing is, the pending wait status field is in the
+ thread_suspend_state, along with other fields that we need to backup
+ before and restore after the thread does an inferior function call.
+ Therefore, make the thread_suspend_state member private
+ (thread_info::suspend becomes thread_info::m_suspend), and add getters /
+ setters for all of its fields:
+
+ - pending wait status
+ - stop signal
+ - stop reason
+ - stop pc
+
+ For the pending wait status, add the additional has_pending_waitstatus
+ and clear_pending_waitstatus methods.
+
+ I think this makes the thread_info interface a bit nicer, because we
+ now access the fields as:
+
+ thread->stop_pc ()
+
+ rather than
+
+ thread->suspend.stop_pc
+
+ The stop_pc field being in the `suspend` structure is an implementation
+ detail of thread_info that callers don't need to be aware of.
+
+ For the backup / restore of the thread_suspend_state structure, add
+ save_suspend_to and restore_suspend_from methods. You might wonder why
+ `save_suspend_to`, as opposed to a simple getter like
+
+ thread_suspend_state &suspend ();
+
+ I want to make it clear that this is to be used only for backing up and
+ restoring the suspend state, _not_ to access fields like:
+
+ thread->suspend ()->stop_pc
+
+ Adding some getters / setters allows adding some assertions. I find
+ that this helps understand how things are supposed to work. Add:
+
+ - When getting the pending status (pending_waitstatus method), ensure
+ that there is a pending status.
+ - When setting a pending status (set_pending_waitstatus method), ensure
+ there is no pending status.
+
+ There is one case I found where this wasn't true - in
+ remote_target::process_initial_stop_replies - which needed adjustments
+ to respect that contract. I think it's because
+ process_initial_stop_replies is kind of (ab)using the
+ thread_info::suspend::waitstatus to store some statuses temporarily, for
+ its internal use (statuses it doesn't intent on leaving pending).
+
+ process_initial_stop_replies pulls out stop replies received during the
+ initial connection using target_wait. It always stores the received
+ event in `evthread->suspend.waitstatus`. But it only sets
+ waitstatus_pending_p, if it deems the event interesting enough to leave
+ pending, to be reported to the core:
+
+ if (ws.kind != TARGET_WAITKIND_STOPPED
+ || ws.value.sig != GDB_SIGNAL_0)
+ evthread->suspend.waitstatus_pending_p = 1;
+
+ It later uses this flag a bit below, to choose which thread to make the
+ "selected" one:
+
+ if (selected == NULL
+ && thread->suspend.waitstatus_pending_p)
+ selected = thread;
+
+ And ultimately that's used if the user-visible mode is all-stop, so that
+ we print the stop for that interesting thread:
+
+ /* In all-stop, we only print the status of one thread, and leave
+ others with their status pending. */
+ if (!non_stop)
+ {
+ thread_info *thread = selected;
+ if (thread == NULL)
+ thread = lowest_stopped;
+ if (thread == NULL)
+ thread = first;
+
+ print_one_stopped_thread (thread);
+ }
+
+ But in any case (all-stop or non-stop), print_one_stopped_thread needs
+ to access the waitstatus value of these threads that don't have a
+ pending waitstatus (those that had TARGET_WAITKIND_STOPPED +
+ GDB_SIGNAL_0). This doesn't work with the assertions I've
+ put.
+
+ So, change the code to only set the thread's wait status if it is an
+ interesting one that we are going to leave pending. If the thread
+ stopped due to a non-interesting event (TARGET_WAITKIND_STOPPED +
+ GDB_SIGNAL_0), don't store it. Adjust print_one_stopped_thread to
+ understand that if a thread has no pending waitstatus, it's because it
+ stopped with TARGET_WAITKIND_STOPPED + GDB_SIGNAL_0.
+
+ The call to set_last_target_status also uses the pending waitstatus.
+ However, given that the pending waitstatus for the thread may have been
+ cleared in print_one_stopped_thread (and that there might not even be a
+ pending waitstatus in the first place, as explained above), it is no
+ longer possible to do it at this point. To fix that, move the call to
+ set_last_target_status in print_one_stopped_thread. I think this will
+ preserve the existing behavior, because set_last_target_status is
+ currently using the current thread's wait status. And the current
+ thread is the last one for which print_one_stopped_thread is called. So
+ by calling set_last_target_status in print_one_stopped_thread, we'll get
+ the same result. set_last_target_status will possibly be called
+ multiple times, but only the last call will matter. It just means
+ possibly more calls to set_last_target_status, but those are cheap.
+
+ Change-Id: Iedab9653238eaf8231abcf0baa20145acc8b77a7
+
+2021-07-13 Simon Marchi <simon.marchi@polymtl.ca>
+
+ gdb: add setter / getter for thread_info resumed state
+ A following patch will want to do things when a thread's resumed state
+ changes. Make the `resumed` field private (renamed to `m_resumed`) and
+ add a getter and a setter for it. The following patch in question will
+ therefore be able to add some code to the setter.
+
+ Change-Id: I360c48cc55a036503174313261ce4e757d795319
+
+2021-07-13 Simon Marchi <simon.marchi@polymtl.ca>
+
+ gdb: use intrusive list for step-over chain
+ The threads that need a step-over are currently linked using an
+ hand-written intrusive doubly-linked list, so that seems a very good
+ candidate for intrusive_list, convert it.
+
+ For this, we have a use case of appending a list to another one (in
+ start_step_over). Based on the std::list and Boost APIs, add a splice
+ method. However, only support splicing the other list at the end of the
+ `this` list, since that's all we need.
+
+ Add explicit default assignment operators to
+ reference_to_pointer_iterator, which are otherwise implicitly deleted.
+ This is needed because to define thread_step_over_list_safe_iterator, we
+ wrap reference_to_pointer_iterator inside a basic_safe_iterator, and
+ basic_safe_iterator needs to be able to copy-assign the wrapped
+ iterator. The move-assignment operator is therefore not needed, only
+ the copy-assignment operator is. But for completeness, add both.
+
+ Change-Id: I31b2ff67c7b78251314646b31887ef1dfebe510c
+
+2021-07-13 Pedro Alves <pedro@palves.net>
+
+ gdb: make inferior_list use intrusive_list
+ Change inferior_list, the global list of inferiors, to use
+ intrusive_list. I think most other changes are somewhat obvious
+ fallouts from this change.
+
+ There is a small change in behavior in scoped_mock_context. Before this
+ patch, constructing a scoped_mock_context would replace the whole
+ inferior list with only the new mock inferior. Tests using two
+ scoped_mock_contexts therefore needed to manually link the two inferiors
+ together, as the second scoped_mock_context would bump the first mock
+ inferior from the thread list. With this patch, a scoped_mock_context
+ adds its mock inferior to the inferior list on construction, and removes
+ it on destruction. This means that tests run with mock inferiors in the
+ inferior list in addition to any pre-existing inferiors (there is always
+ at least one). There is no possible pid clash problem, since each
+ scoped mock inferior uses its own process target, and pids are per
+ process target.
+
+ Co-Authored-By: Simon Marchi <simon.marchi@efficios.com>
+ Change-Id: I7eb6a8f867d4dcf8b8cd2dcffd118f7270756018
+
+2021-07-13 Pedro Alves <pedro@palves.net>
+
+ gdb: introduce intrusive_list, make thread_info use it
+ GDB currently has several objects that are put in a singly linked list,
+ by having the object's type have a "next" pointer directly. For
+ example, struct thread_info and struct inferior. Because these are
+ simply-linked lists, and we don't keep track of a "tail" pointer, when
+ we want to append a new element on the list, we need to walk the whole
+ list to find the current tail. It would be nice to get rid of that
+ walk. Removing elements from such lists also requires a walk, to find
+ the "previous" position relative to the element being removed. To
+ eliminate the need for that walk, we could make those lists
+ doubly-linked, by adding a "prev" pointer alongside "next". It would be
+ nice to avoid the boilerplate associated with maintaining such a list
+ manually, though. That is what the new intrusive_list type addresses.
+
+ With an intrusive list, it's also possible to move items out of the
+ list without destroying them, which is interesting in our case for
+ example for threads, when we exit them, but can't destroy them
+ immediately. We currently keep exited threads on the thread list, but
+ we could change that which would simplify some things.
+
+ Note that with std::list, element removal is O(N). I.e., with
+ std::list, we need to walk the list to find the iterator pointing to
+ the position to remove. However, we could store a list iterator
+ inside the object as soon as we put the object in the list, to address
+ it, because std::list iterators are not invalidated when other
+ elements are added/removed. However, if you need to put the same
+ object in more than one list, then std::list<object> doesn't work.
+ You need to instead use std::list<object *>, which is less efficient
+ for requiring extra memory allocations. For an example of an object
+ in multiple lists, see the step_over_next/step_over_prev fields in
+ thread_info:
+
+ /* Step-over chain. A thread is in the step-over queue if these are
+ non-NULL. If only a single thread is in the chain, then these
+ fields point to self. */
+ struct thread_info *step_over_prev = NULL;
+ struct thread_info *step_over_next = NULL;
+
+ The new intrusive_list type gives us the advantages of an intrusive
+ linked list, while avoiding the boilerplate associated with manually
+ maintaining it.
+
+ intrusive_list's API follows the standard container interface, and thus
+ std::list's interface. It is based the API of Boost's intrusive list,
+ here:
+
+ https://www.boost.org/doc/libs/1_73_0/doc/html/boost/intrusive/list.html
+
+ Our implementation is relatively simple, while Boost's is complicated
+ and intertwined due to a lot of customization options, which our version
+ doesn't have.
+
+ The easiest way to use an intrusive_list is to make the list's element
+ type inherit from intrusive_node. This adds a prev/next pointers to
+ the element type. However, to support putting the same object in more
+ than one list, intrusive_list supports putting the "node" info as a
+ field member, so you can have more than one such nodes, one per list.
+
+ As a first guinea pig, this patch makes the per-inferior thread list use
+ intrusive_list using the base class method.
+
+ Unlike Boost's implementation, ours is not a circular list. An earlier
+ version of the patch was circular: the intrusive_list type included an
+ intrusive_list_node "head". In this design, a node contained pointers
+ to the previous and next nodes, not the previous and next elements.
+ This wasn't great for when debugging GDB with GDB, as it was difficult
+ to get from a pointer to the node to a pointer to the element. With the
+ design proposed in this patch, nodes contain pointers to the previous
+ and next elements, making it easy to traverse the list by hand and
+ inspect each element.
+
+ The intrusive_list object contains pointers to the first and last
+ elements of the list. They are nullptr if the list is empty.
+ Each element's node contains a pointer to the previous and next
+ elements. The first element's previous pointer is nullptr and the last
+ element's next pointer is nullptr. Therefore, if there's a single
+ element in the list, both its previous and next pointers are nullptr.
+ To differentiate such an element from an element that is not linked into
+ a list, the previous and next pointers contain a special value (-1) when
+ the node is not linked. This is necessary to be able to reliably tell
+ if a given node is currently linked or not.
+
+ A begin() iterator points to the first item in the list. An end()
+ iterator contains nullptr. This makes iteration until end naturally
+ work, as advancing past the last element will make the iterator contain
+ nullptr, making it equal to the end iterator. If the list is empty,
+ a begin() iterator will contain nullptr from the start, and therefore be
+ immediately equal to the end.
+
+ Iterating on an intrusive_list yields references to objects (e.g.
+ `thread_info&`). The rest of GDB currently expects iterators and ranges
+ to yield pointers (e.g. `thread_info*`). To bridge the gap, add the
+ reference_to_pointer_iterator type. It is used to define
+ inf_threads_iterator.
+
+ Add a Python pretty-printer, to help inspecting intrusive lists when
+ debugging GDB with GDB. Here's an example of the output:
+
+ (top-gdb) p current_inferior_.m_obj.thread_list
+ $1 = intrusive list of thread_info = {0x61700002c000, 0x617000069080, 0x617000069400, 0x61700006d680, 0x61700006eb80}
+
+ It's not possible with current master, but with this patch [1] that I
+ hope will be merged eventually, it's possible to index the list and
+ access the pretty-printed value's children:
+
+ (top-gdb) p current_inferior_.m_obj.thread_list[1]
+ $2 = (thread_info *) 0x617000069080
+ (top-gdb) p current_inferior_.m_obj.thread_list[1].ptid
+ $3 = {
+ m_pid = 406499,
+ m_lwp = 406503,
+ m_tid = 0
+ }
+
+ Even though iterating the list in C++ yields references, the Python
+ pretty-printer yields pointers. The reason for this is that the output
+ of printing the thread list above would be unreadable, IMO, if each
+ thread_info object was printed in-line, since they contain so much
+ information. I think it's more useful to print pointers, and let the
+ user drill down as needed.
+
+ [1] https://sourceware.org/pipermail/gdb-patches/2021-April/178050.html
+
+ Co-Authored-By: Simon Marchi <simon.marchi@efficios.com>
+ Change-Id: I3412a14dc77f25876d742dab8f44e0ba7c7586c0
+
+2021-07-13 GDB Administrator <gdbadmin@sourceware.org>
+
+ Automatic date update in version.in
+
+2021-07-12 Tucker <tuckkern@sourceware@gmail.com>
+
+ Add the SEC_ELF_OCTETS flag to debug sections created by the assembler.
+ PR 28054
+ gas * config/obj-elf.c (obj_elf_change_section): Set the
+ SEF_ELF_OCTETS flag on debug sections.
+
+2021-07-12 Tom de Vries <tdevries@suse.de>
+
+ [gdb/testsuite] Fix gdb.btrace/tsx.exp on system with tsx disabled in microcode
+ Recently I started to see this fail with trunk:
+ ...
+ (gdb) record instruction-history^M
+ 1 0x00000000004004ab <main+4>: call 0x4004b7 <test>^M
+ 2 0x00000000004004c6 <test+15>: mov $0x1,%eax^M
+ 3 0x00000000004004cb <test+20>: ret ^M
+ (gdb) FAIL: gdb.btrace/tsx.exp: speculation indication
+ ...
+
+ This is due to an intel microcode update (1) that disables Intel TSX by default.
+
+ Fix this by updating the pattern.
+
+ Tested on x86_64-linux, with both gcc 7.5.0 and clang 12.0.1.
+
+ [1] https://www.intel.com/content/www/us/en/support/articles/000059422/processors.html
+
+ gdb/testsuite/ChangeLog:
+
+ 2021-07-12 Tom de Vries <tdevries@suse.de>
+
+ PR testsuite/28057
+ * gdb.btrace/tsx.exp: Add pattern for system with tsx disabled in
+ microcode.
+
+2021-07-12 Nick Clifton <nickc@redhat.com>
+
+ Updated French translation for the binutils sub-directory
+
+ Fix a translation problem for the text generated by readelf at the start of a dump of a dynamic section.
+ PR 28072
+ binutils * readelf.c (process_dynamic_section): Use ngettext to help with translation of header text.
+
+2021-07-12 Tom de Vries <tdevries@suse.de>
+
+ [gdb/testsuite] Fix gdb.mi/mi-info-sources.exp for extra debug info
+ When running test-case gdb.mi/mi-info-sources.exp, I run into:
+ ...
+ Running src/gdb/testsuite/gdb.mi/mi-info-sources.exp ...
+ ERROR: internal buffer is full.
+ ...
+ due to extra debug info from the shared libraries.
+
+ Fix this by using "nosharedlibrary".
+
+ Then I run into these FAILs:
+ ...
+ FAIL: gdb.mi/mi-info-sources.exp: debug_read=false: \
+ -file-list-exec-source-files (unexpected output)
+ FAIL: gdb.mi/mi-info-sources.exp: debug_read=true: \
+ -file-list-exec-source-files (unexpected output)
+ FAIL: gdb.mi/mi-info-sources.exp: debug_read=true: \
+ -file-list-exec-source-files --group-by-objfile, look for \
+ mi-info-sources.c (unexpected output)
+ FAIL: gdb.mi/mi-info-sources.exp: debug_read=true: \
+ -file-list-exec-source-files --group-by-objfile, look for \
+ mi-info-sources-base.c (unexpected output)
+ ...
+ due to openSUSE executables which have debug info for objects from sources
+ like sysdeps/x86_64/crtn.S.
+
+ Fix these by updating the patterns, and adding "maint expand-symtabs" to
+ reliably get fully-read objfiles.
+
+ Then I run into FAILs when using the readnow target board. Fix these by
+ skipping the relevant tests.
+
+ Then I run into FAILs when using the cc-with-gnu-debuglink board. Fix these
+ by updating the patterns.
+
+ Tested on x86_64-linux, with native, check-read1, readnow, cc-with-gdb-index,
+ cc-with-debug-names, cc-with-gnu-debuglink, cc-with-dwz, cc-with-dwz-m.
+
+ gdb/testsuite/ChangeLog:
+
+ 2021-07-05 Tom de Vries <tdevries@suse.de>
+
+ * lib/mi-support.exp (mi_readnow): New proc.
+ * gdb.mi/mi-info-sources.exp: Use nosharedlibrary. Update patterns.
+ Skip tests for readnow. Use "maint expand-symtabs".
+
+2021-07-12 Tankut Baris Aktemur <tankut.baris.aktemur@intel.com>
+
+ testsuite: fix whitespace problems in gdb.mi/mi-break.exp
+ Replace leading 8-spaces with tab and remove trailing space in
+ gdb.mi/mi-break.exp.
+
+2021-07-12 GDB Administrator <gdbadmin@sourceware.org>
+
+ Automatic date update in version.in
+
+2021-07-11 GDB Administrator <gdbadmin@sourceware.org>
+
+ Automatic date update in version.in
+
+2021-07-10 Alan Modra <amodra@gmail.com>
+
+ Tidy commit 49910fd88dcd
+ Pointer range checking is UB if the values compared are outside the
+ underlying array elements (plus one).
+
+ * dwarf2.c (read_address): Remove accidental commit.
+ (read_ranges): Compare offset rather than pointers.
+
+2021-07-10 Alan Modra <amodra@gmail.com>
+
+ PR28069, assertion fail in dwarf.c:display_discr_list
+ We shouldn't be asserting on anything to do with leb128 values, or
+ reporting file and line numbers when something unexpected happens.
+ leb128 data is of indeterminate length, perfect for fuzzer mayhem.
+ It would only make sense to assert or report dwarf.c/readelf.c source
+ lines if the code had already sized and sanity checked the leb128
+ values.
+
+ After removing the assertions, the testcase then gave:
+
+ <37> DW_AT_discr_list : 5 byte block: 0 0 0 0 0 (label 0, label 0, label 0, label 0, <corrupt>
+ readelf: Warning: corrupt discr_list - unrecognized discriminant byte 0x5
+
+ <3d> DW_AT_encoding : 0 (void)
+ <3e> DW_AT_identifier_case: 0 (case_sensitive)
+ <3f> DW_AT_virtuality : 0 (none)
+ <40> DW_AT_decimal_sign: 5 (trailing separate)
+
+ So the DW_AT_discr_list was showing more data than just the 5 byte
+ block. That happened due to "end" pointing a long way past the end of
+ block, and uvalue decrementing past zero on one of the leb128 bytes.
+
+ PR 28069
+ * dwarf.c (display_discr_list): Remove assertions. Delete "end"
+ parameter, use initial "data" pointer as the end. Formatting.
+ Don't count down bytes as they are read.
+ (read_and_display_attr_value): Adjust display_discr_list call.
+ (read_and_print_leb128): Don't pass __FILE__ and __LINE__ to
+ report_leb_status.
+ * dwarf.h (report_leb_status): Don't report file and line
+ numbers. Delete file and lnum parameters,
+ (READ_ULEB, READ_SLEB): Adjust.
+
+2021-07-10 GDB Administrator <gdbadmin@sourceware.org>
+
+ Automatic date update in version.in
+
+2021-07-09 H.J. Lu <hjl.tools@gmail.com>
+
+ ld/NEWS: Clarify -z [no]indirect-extern-access
+ -z [no]indirect-extern-access are only for x86 ELF linker.
+
+2021-07-09 H.J. Lu <hjl.tools@gmail.com>
+
+ elf: Limits 2 GNU_PROPERTY_1_NEEDED tests to Linux/x86
+ Run property-1_needed-1b.d and property-1_needed-1c.d, which pass
+ -z [no]indirect-extern-access to linker, only run for Linux/x86 targets.
+
+ * testsuite/ld-elf/property-1_needed-1b.d: Only run for
+ Linux/x86 targets.
+ * testsuite/ld-elf/property-1_needed-1c.d: Likewise.
+
+2021-07-09 H.J. Lu <hjl.tools@gmail.com>
+
+ elf: Add GNU_PROPERTY_1_NEEDED check
+ If GNU_PROPERTY_1_NEEDED_INDIRECT_EXTERN_ACCESS is set on any input
+ relocatable files:
+
+ 1. Don't generate copy relocations.
+ 2. Turn off extern_protected_data since it implies
+ GNU_PROPERTY_NO_COPY_ON_PROTECTED.
+ 3. Treate reference to protected symbols with indirect external access
+ as local.
+ 4. Set GNU_PROPERTY_1_NEEDED_INDIRECT_EXTERN_ACCESS on output.
+ 5. When generating executable, clear this bit when there are non-GOT or
+ non-PLT relocations in input relocatable files without the bit set.
+ 6. Add -z [no]indirect-extern-access to control indirect external access.
+
+ bfd/
+
+ * elf-bfd (elf_obj_tdata): Add has_indirect_extern_access.
+ (elf_has_indirect_extern_access): New.
+ * elf-properties.c (_bfd_elf_parse_gnu_properties): Set
+ elf_has_indirect_extern_access and elf_has_no_copy_on_protected
+ when seeing GNU_PROPERTY_1_NEEDED_INDIRECT_EXTERN_ACCESS.
+ (elf_write_gnu_propertie): Add an argument to pass link_info.
+ Set needed_1_p for GNU_PROPERTY_1_NEEDED in memory.
+ (_bfd_elf_link_setup_gnu_properties): Handle
+ GNU_PROPERTY_1_NEEDED_INDIRECT_EXTERN_ACCESS for
+ -z indirect-extern-access. Set nocopyreloc to true and
+ extern_protected_data to false for indirect external access.
+ (_bfd_elf_convert_gnu_properties): Updated.
+ * elf32-i386.c (elf_i386_check_relocs): Set
+ non_got_ref_without_indirect_extern_access on legacy non-GOT or
+ non-PLT references.
+ * elf64-x86-64.c (elf_x86_64_check_relocs): Likewise.
+ * elflink.c (_bfd_elf_symbol_refs_local_p): Return true for
+ STV_PROTECTED symbols with indirect external access.
+ * elfxx-x86.c (_bfd_x86_elf_adjust_dynamic_symbol): Clear
+ indirect_extern_access for legacy non-GOT/non-PLT references.
+ * elfxx-x86.h (elf_x86_link_hash_entry): Add
+ non_got_ref_without_indirect_extern_access.
+
+ include/
+
+ * bfdlink.h (bfd_link_info): Add indirect_extern_access and
+ needed_1_p. Change nocopyreloc to int.
+
+ ld/
+
+ * NEWS: Mention -z [no]indirect-extern-access
+ * ld.texi: Document -z [no]indirect-extern-access
+ * ldmain.c (main): Initialize link_info.indirect_extern_access
+ to -1.
+ * emulparams/extern_protected_data.sh: Support
+ -z [no]indirect-extern-access.
+ * testsuite/ld-elf/indirect-extern-access-1.rd: New file
+ * testsuite/ld-elf/indirect-extern-access-1a.c: Likewise.
+ * testsuite/ld-elf/indirect-extern-access-1b.c: Likewise.
+ * testsuite/ld-elf/indirect-extern-access-2.rd: Likewise.
+ * testsuite/ld-elf/indirect-extern-access-2a.c: Likewise.
+ * testsuite/ld-elf/indirect-extern-access-2b.c: Likewise.
+ * testsuite/ld-elf/indirect-extern-access-3.rd: Likewise.
+ * testsuite/ld-elf/indirect-extern-access.S: Likewise.
+ * testsuite/ld-elf/property-1_needed-1b.d: Likewise.
+ * testsuite/ld-elf/property-1_needed-1c.d: Likewise.
+ * testsuite/ld-x86-64/indirect-extern-access.rd: Likewise.
+ * testsuite/ld-x86-64/protected-data-1.h: Likewise.
+ * testsuite/ld-x86-64/protected-data-1a.c: Likewise.
+ * testsuite/ld-x86-64/protected-data-1b.c: Likewise.
+ * testsuite/ld-x86-64/protected-data-2a.S: Likewise.
+ * testsuite/ld-x86-64/protected-data-2b.S: Likewise.
+ * testsuite/ld-x86-64/protected-func-2a.S: Likewise.
+ * testsuite/ld-x86-64/protected-func-2b.S: Likewise.
+ * testsuite/ld-x86-64/protected-func-2c.c: Likewise.
+ * testsuite/ld-elf/linux-x86.exp: Run test with
+ GNU_PROPERTY_1_NEEDED_INDIRECT_EXTERN_ACCESS.
+ * testsuite/ld-x86-64/x86-64.exp: Run tests for protected
+ function and data with indirect external access.
+
+2021-07-09 H.J. Lu <hjl.tools@gmail.com>
+
+ elf: Add GNU_PROPERTY_1_NEEDED
+ Add GNU_PROPERTY_1_NEEDED:
+
+ #define GNU_PROPERTY_1_NEEDED GNU_PROPERTY_UINT32_OR_LO
+
+ to indicate the needed properties by the object file.
+
+ Add GNU_PROPERTY_1_NEEDED_INDIRECT_EXTERN_ACCESS:
+
+ #define GNU_PROPERTY_1_NEEDED_INDIRECT_EXTERN_ACCESS (1U << 0)
+
+ to indicate that the object file requires canonical function pointers and
+ cannot be used with copy relocation.
+
+ binutils/
+
+ * readelf.c (decode_1_needed): New.
+ (print_gnu_property_note): Handle GNU_PROPERTY_1_NEEDED.
+
+ include/
+
+ * elf/common.h (GNU_PROPERTY_1_NEEDED): New.
+ (GNU_PROPERTY_1_NEEDED_INDIRECT_EXTERN_ACCESS): Likewise.
+
+ ld/
+
+ * testsuite/ld-elf/property-1_needed-1a.d: New file.
+ * testsuite/ld-elf/property-1_needed-1.s: Likewise.
+
+2021-07-09 GDB Administrator <gdbadmin@sourceware.org>
+
+ Automatic date update in version.in
+
+2021-07-09 Lancelot SIX <lsix@lancelotsix.com>
+
+ Remove unused parameter in maybe_software_singlestep
+ While working around, I noticed that the last parameter of
+ maybe_software_singlestep is never used. This path removes
+ it.
+
+ Built on x86_64-linux-gnu and riscv64-linux-gnu.
+
+ gdb/ChangeLog:
+
+ * infrun.c (maybe_software_singlestep): Remove unused PC
+ parameter.
+ (resume_1): Update calls to maybe_software_singlestep.
+
+2021-07-08 H.J. Lu <hjl.tools@gmail.com>
+
+ x86-64: Disallow PC reloc against weak undefined symbols in PIE
+ Disallow PC relocations against weak undefined symbols in PIE since they
+ can lead to non-zero address at run-time.
+
+ bfd/
+
+ PR ld/21782
+ * elf64-x86-64.c (elf_x86_64_relocate_section): Disallow PC
+ relocations against weak undefined symbols in PIE.
+
+ ld/
+
+ PR ld/21782
+ * testsuite/ld-x86-64/pie3.d: Expect linker error.
+
+2021-07-08 H.J. Lu <hjl.tools@gmail.com>
+
+ ld: Limit cache size and add --max-cache-size=SIZE
+ When link_info.keep_memory is true, linker caches the relocation
+ information and symbol tables of input files in memory. When there
+ are many input files with many relocations, we may run out of memory.
+ Add --max-cache-size=SIZE to set the maximum cache size.
+
+ bfd/
+
+ PR ld/18028
+ * bfd.c (bfd): Add alloc_size.
+ * elf-bfd.h (_bfd_elf_link_info_read_relocs): New.
+ * elf32-i386.c (elf_i386_check_relocs): Use _bfd_link_keep_memory.
+ Update cache_size.
+ * elf64-x86-64.c (elf_x86_64_check_relocs): Likewise.
+ * elflink.c (_bfd_elf_link_read_relocs): Renamed to ...
+ (_bfd_elf_link_info_read_relocs): This. Update cache_size.
+ (_bfd_elf_link_read_relocs): New.
+ (_bfd_elf_link_check_relocs): Call _bfd_elf_link_info_read_relocs
+ instead of _bfd_elf_link_read_relocs.
+ (elf_link_add_object_symbols): Likewise.
+ (elf_link_input_bfd): Likewise.
+ (init_reloc_cookie_rels): Likewise.
+ (init_reloc_cookie): Update cache_size. Call
+ _bfd_elf_link_info_read_relocs instead of
+ _bfd_elf_link_read_relocs.
+ (link_info_ok): New.
+ (elf_gc_smash_unused_vtentry_relocs): Updated. Call
+ _bfd_elf_link_info_read_relocs instead of
+ _bfd_elf_link_read_relocs.
+ (bfd_elf_gc_sections): Use link_info_ok. Pass &link_info_ok
+ to elf_gc_smash_unused_vtentry_relocs.
+ * libbfd-in.h (_bfd_link_keep_memory): New.
+ * linker.c (_bfd_link_keep_memory): New.
+ * opncls.c (bfd_alloc): Update alloc_size.
+ * bfd-in2.h: Regenerated.
+ * libbfd.h: Likewise.
+
+ include/
+
+ PR ld/18028
+ * bfdlink.h (bfd_link_info): Add cache_size and max_cache_size.
+
+ ld/
+
+ PR ld/18028
+ * NEWS: Mention --max-cache-size=SIZE.
+ * ld.texi: Document --max-cache-size=SIZE.
+ * ldlex.h (option_values): Add OPTION_MAX_CACHE_SIZE.
+ * ldmain.c: (main): Set link_info.max_cache_size to -1.
+ * lexsup.c (ld_options): Add --max-cache-size=SIZE.
+ (parse_args): Support OPTION_MAX_CACHE_SIZE.
+ * testsuite/ld-bootstrap/bootstrap.exp: Add test for
+ --max-cache-size=-1.
+
+2021-07-08 Simon Marchi <simon.marchi@polymtl.ca>
+
+ gdb: don't set Linux-specific displaced stepping methods in s390_gdbarch_init
+ According to bug 28056, running an s390x binary gives:
+
+ (gdb) run
+ Starting program: /usr/bin/ls
+ /home/ubuntu/tmp/gdb-11.0.90.20210705/gdb/linux-tdep.c:2550: internal-error: displaced_step_prepare_status linux_displaced_step_prepare(gdbarch*, thread_info*, CORE_ADDR&): Assertion `gdbarch_data->num_disp_step_buffers > 0' failed.
+
+ This is because the s390 architecture registers some Linux-specific
+ displaced stepping callbacks in the OS-agnostic s390_gdbarch_init:
+
+ set_gdbarch_displaced_step_prepare (gdbarch, linux_displaced_step_prepare);
+ set_gdbarch_displaced_step_finish (gdbarch, linux_displaced_step_finish);
+ set_gdbarch_displaced_step_restore_all_in_ptid
+ (gdbarch, linux_displaced_step_restore_all_in_ptid);
+
+ But then the Linux-specific s390_linux_init_abi_any passes
+ num_disp_step_buffers=0 to linux_init_abi:
+
+ linux_init_abi (info, gdbarch, 0);
+
+ The problem happens when linux_displaced_step_prepare is called for the
+ first time. It tries to allocate the displaced stepping buffers, but
+ sees that the number of displaced stepping buffers for that architecture
+ is 0, which is unexpected / invalid.
+
+ s390_gdbarch_init should not register the linux_* callbacks, that is
+ expected to be done by linux_init_abi. If debugging a bare-metal s390
+ program, or an s390 program on another OS GDB doesn't know about, we
+ wouldn't want to use them. We would either register no callbacks, if
+ displaced stepping isn't supported, or register a different set of
+ callbacks if we wanted to support displaced stepping in those cases.
+
+ The commit that refactored the displaced stepping machinery and
+ introduced these set_gdbarch_displaced_step_* calls is 187b041e2514
+ ("gdb: move displaced stepping logic to gdbarch, allow starting
+ concurrent displaced steps"). However, even before that,
+ s390_gdbarch_init did:
+
+ set_gdbarch_displaced_step_location (gdbarch, linux_displaced_step_location);
+
+ ... which already seemed wrong. The Linux-specific callback was used
+ even for non-Linux system. Maybe that was on purpose, because it would
+ also happen to work in some other non-Linux case, or maybe it was simply
+ a mistake. I'll assume that this was a small mistake when
+ s390-tdep.{h,c} where factored out of s390-linux-tdep.c, in d6e589456475
+ ("s390: Split up s390-linux-tdep.c into two files").
+
+ Fix this by removing the setting of these displaced step callbacks from
+ s390_gdbarch_init. Instead, pass num_disp_step_buffers=1 to
+ linux_init_abi, in s390_linux_init_abi_any. Doing so will cause
+ linux_init_abi to register these same callbacks. It will also mean that
+ when debugging a bare-metal s390 executable or an executable on another
+ OS that GDB doesn't know about, gdbarch_displaced_step_prepare won't be
+ set, so displaced stepping won't be used.
+
+ This patch will need to be merged in the gdb-11-branch, since this is a
+ GDB 11 regression, so here's the ChangeLog entry:
+
+ gdb/ChangeLog:
+
+ * s390-linux-tdep.c (s390_linux_init_abi_any): Pass 1 (number
+ of displaced stepping buffers to linux_init_abi.
+ * s390-tdep.c (s390_gdbarch_init): Don't set the Linux-specific
+ displaced-stepping gdbarch callbacks.
+
+ Change-Id: Ieab2f8990c78fde845ce7378d6fd4ee2833800d5
+ Bug: https://sourceware.org/bugzilla/show_bug.cgi?id=28056
+
+2021-07-08 Simon Marchi <simon.marchi@polymtl.ca>
+
+ gdb/Makefile.in: remove testsuite from SUBDIRS
+ When distclean-ing a configured / built gdb directory, like so:
+
+ $ ./configure && make all-gdb && make distclean
+
+ The distclean operation fails with:
+
+ Missing testsuite/Makefile
+
+ If we look at the SUBDIRS variable in the generated gdb/Makefile,
+ testsuite is there twice:
+
+ SUBDIRS = doc testsuite data-directory testsuite
+
+ So we try distclean-ing the testsuite directory twice. The second time,
+ gdb/testsuite/Makefile doesn't exist, so it fails.
+
+ The first "testsuite" comes from the @subdirs@ replacement, because of
+ the `AC_CONFIG_SUBDIRS` macro in gdb/configure.ac. The second one is
+ hard-coded in gdb/Makefile.in:
+
+ SUBDIRS = doc @subdirs@ data-directory testsuite
+
+ The hard-coded was added by:
+
+ bdbbcd577460 ("Always build 'all' in gdb/testsuite")
+
+ which came after `testsuite` was removed from @subdirs@ by:
+
+ f99d1d37496f ("Remove gdb/testsuite/configure")
+
+ My commit a100a94530eb ("gdb/testsuite: restore configure script")
+ should have removed the hard-coded `testsuite`, since it added it back
+ as a "subdir", but I missed it because I only looked f99d1d37496f to
+ write my patch.
+
+ Fix this by removing the hard-coded one.
+
+ This patch should be pushed to both master and gdb-11-branch, hence the
+ ChangeLog entry:
+
+ gdb/ChangeLog:
+
+ * Makefile.in (SUBDIRS): Remove testsuite.
+
+ Change-Id: I63e5590b1a08673c646510b3ecc74600eae9f92d
+
+2021-07-08 Nick Clifton <nickc@redhat.com>
+
+ Updated Portuguese translation for the BFD sub-directory
+
+2021-07-08 Tom de Vries <tdevries@suse.de>
+
+ [gdb/testsuite] Fix gdb.guile/scm-breakpoint.exp with guile 3.0
+ When running test-case gdb.guile/scm-breakpoint.exp on openSUSE Tumbleweed
+ with guile 3.0, I run into:
+ ...
+ (gdb) guile (define cp (make-breakpoint "syscall" #:type BP_CATCHPOINT))^M
+ ERROR: In procedure make-breakpoint:^M
+ In procedure gdbscm_make_breakpoint: unsupported breakpoint type in \
+ position 3: "BP_CATCHPOINT"^M
+ Error while executing Scheme code.^M
+ (gdb) FAIL: gdb.guile/scm-breakpoint.exp: test_catchpoints: \
+ create a catchpoint via the api
+ ...
+
+ The same test passes on openSUSE Leap 15.2 with guile 2.0, where the second
+ line of the error message starts with the same prefix as the first:
+ ...
+ ERROR: In procedure gdbscm_make_breakpoint: unsupported breakpoint type in \
+ position 3: "BP_CATCHPOINT"^M
+ ...
+
+ I observe the same difference in many other tests, f.i.:
+ ...
+ (gdb) gu (print (value-add i '()))^M
+ ERROR: In procedure value-add:^M
+ In procedure gdbscm_value_add: Wrong type argument in position 2: ()^M
+ Error while executing Scheme code.^M
+ (gdb) PASS: gdb.guile/scm-math.exp: catch error in guile type conversion
+ ...
+ but it doesn't cause FAILs anywhere else.
+
+ Fix this by updating the regexp to make the "ERROR: " prefix optional.
+
+ Tested on x86_64-linux, with both guile 2.0 and 3.0.
+
+ gdb/testsuite/ChangeLog:
+
+ 2021-07-07 Tom de Vries <tdevries@suse.de>
+
+ * gdb.guile/scm-breakpoint.exp: Make additional "ERROR: " prefix in
+ exception printing optional.
+
+2021-07-08 Mike Frysinger <vapier@gentoo.org>
+
+ sim: erc32: use libsim.a for common objects
+ We're starting to move more objects to the common build that sis did
+ not need before, so linking them is causing problems (when common
+ objects end up needing symbols from non-common objects). Switch it
+ to the libsim.a archive which will allow the link to pull out only
+ what it needs.
+
+2021-07-08 GDB Administrator <gdbadmin@sourceware.org>
+
+ Automatic date update in version.in
+
+2021-07-07 Nick Clifton <nickc@redhat.com>
+
+ Remove an accidental change to elfcode.h included as part of commit 6e0dfbf420.
+ PR 27659
+ * elfcode.h (elf_swap_symbol_out): Revert accidental change that
+ removed an abort if the shndx pointer is NULL.
+
+2021-07-07 H.J. Lu <hjl.tools@gmail.com>
+
+ ld: Check archive only for archive member
+ Since plugin_maybe_claim calls bfd_close on the original input BFD if it
+ isn't an archive member, pass NULL to bfd_plugin_close_file_descriptor
+ to indicate that the BFD isn't an archive member.
+
+ bfd/
+
+ PR ld/18028
+ * plugin.c (bfd_plugin_close_file_descriptor): Check archive
+ only of abfd != NULL.
+ (try_claim): Pass NULL to bfd_plugin_close_file_descriptor if
+ it isn't an archive member.
+
+ ld/
+
+ PR ld/18028
+ * plugin.c (plugin_input_file): Add comments for abfd and ibfd.
+ (plugin_object_p): Set input->ibfd to NULL if it isn't an
+ archive member.
+
+2021-07-07 Andreas Krebbel <krebbel@linux.ibm.com>
+
+ Add changelog entries for last commit
+
+2021-07-07 Andreas Krebbel <krebbel@linux.ibm.com>
+
+ IBM Z: Add another arch14 instruction
+ opcodes/
+
+ * opcodes/s390-opc.txt: Add qpaci.
+
+ gas/
+
+ * testsuite/gas/s390/zarch-arch14.d: Add qpaci.
+ * testsuite/gas/s390/zarch-arch14.s: Add qpaci.
+
+2021-07-07 Rainer Orth <ro@CeBiTec.Uni-Bielefeld.DE>
+
+ Fix Solaris gprof build with --disable-nls
+ gprof fails to compile on Solaris 10 and 11.3 with --disable-nls:
+
+ In file included from /vol/src/gnu/binutils/hg/binutils-2.37-branch/git/gprof/gprof.h:33,
+ from /vol/src/gnu/binutils/hg/binutils-2.37-branch/git/gprof/basic_blocks.c:24:
+ /usr/include/libintl.h:45:14: error: expected identifier or '(' before 'const'
+ 45 | extern char *dcgettext(const char *, const char *, const int);
+ | ^~~~~~~~~
+ /usr/include/libintl.h:46:14: error: expected identifier or '(' before 'const'
+ 46 | extern char *dgettext(const char *, const char *);
+ | ^~~~~~~~
+ /usr/include/libintl.h:47:14: error: expected identifier or '(' before 'const'
+ 47 | extern char *gettext(const char *);
+ | ^~~~~~~
+ /vol/src/gnu/binutils/hg/binutils-2.37-branch/git/gprof/../bfd/sysdep.h:165:33:
+ error: expected identifier or '(' before 'do'
+ 165 | # define textdomain(Domainname) do {} while (0)
+ | ^~
+ /vol/src/gnu/binutils/hg/binutils-2.37-branch/git/gprof/../bfd/sysdep.h:165:39:
+ error: expected identifier or '(' before 'while'
+ 165 | # define textdomain(Domainname) do {} while (0)
+ | ^~~~~
+ /vol/src/gnu/binutils/hg/binutils-2.37-branch/git/gprof/../bfd/sysdep.h:166:46:
+ error: expected identifier or '(' before 'do'
+ 166 | # define bindtextdomain(Domainname, Dirname) do {} while (0)
+ | ^~
+ /vol/src/gnu/binutils/hg/binutils-2.37-branch/git/gprof/../bfd/sysdep.h:166:52:
+ error: expected identifier or '(' before 'while'
+ 166 | # define bindtextdomain(Domainname, Dirname) do {} while (0)
+ | ^~~~~
+ /usr/include/libintl.h:55:14: error: expected identifier or '(' before 'unsigned'
+ 55 | extern char *dcngettext(const char *, const char *,
+ | ^~~~~~~~~~
+ /usr/include/libintl.h:57:14: error: expected identifier or '(' before 'unsigned'
+ 57 | extern char *dngettext(const char *, const char *,
+ | ^~~~~~~~~
+ /usr/include/libintl.h:59:14: error: expected identifier or '(' before 'unsigned'
+ 59 | extern char *ngettext(const char *, const char *, unsigned long int);
+ | ^~~~~~~~
+
+ This is a known issue already partially fixed in binutils/sysdep.h. For
+ gprof, the same fix needs to be applied in bfd/sysdep.h, as the
+ following patch does. Tested on i386-pc-solaris2.10 and
+ i386-pc-solaris2.11.
+
+ 2021-07-06 Rainer Orth <ro@CeBiTec.Uni-Bielefeld.DE>
+
+ bfd:
+ * sysdep.h [!ENABLE_NLS]: Prevent inclusion of <libintl.h> on
+ Solaris.
+
+2021-07-07 Rainer Orth <ro@CeBiTec.Uni-Bielefeld.DE>
+
+ Check for strnlen declaration to fix Solaris 10 build
+ binutils currently fails to compile on Solaris 10:
+
+ /vol/src/gnu/binutils/hg/binutils-2.37-branch/git/bfd/opncls.c: In function 'bfd_get_debug_link_info_1':
+ /vol/src/gnu/binutils/hg/binutils-2.37-branch/git/bfd/opncls.c:1231:16: error: implicit declaration of function 'strnlen' [-Werror=implicit-function-declaration]
+ 1231 | crc_offset = strnlen (name, size) + 1;
+ | ^~~~~~~
+ /vol/src/gnu/binutils/hg/binutils-2.37-branch/git/bfd/opncls.c:1231:16: error: incompatible implicit declaration of built-in function 'strnlen' [-Werror]
+ /vol/src/gnu/binutils/hg/binutils-2.37-branch/git/bfd/opncls.c: In function 'bfd_get_alt_debug_link_info':
+ /vol/src/gnu/binutils/hg/binutils-2.37-branch/git/bfd/opncls.c:1319:20: error: incompatible implicit declaration of built-in function 'strnlen' [-Werror]
+ 1319 | buildid_offset = strnlen (name, size) + 1;
+ | ^~~~~~~
+
+ and in a couple of other places. The platform lacks strnlen, and while
+ libiberty.h can provide a fallback declaration, the necessary configure
+ test isn't run.
+
+ Fixed with the following patch. Tested on i386-pc-solaris2.10.
+
+ 2021-07-06 Rainer Orth <ro@CeBiTec.Uni-Bielefeld.DE>
+
+ bfd:
+ * configure.ac: Check for strnlen declaration.
+ * configure, config.in: Regenerate.
+
+ binutils:
+ * configure.ac: Check for strnlen declaration.
+ * configure, config.in: Regenerate.
+
+2021-07-07 Nick Clifton <nickc@redhat.com>
+
+ Fix problems translating messages when a percentage sign appears at the end of a string.
+ PR 28051
+ gas * config/tc-i386.c (offset_in_range): Reformat error messages in
+ order to fix problems when translating.
+ (md_assemble): Likewise.
+ * messages.c (as_internal_value_out_of_range): Likewise.
+ * read.c (emit_expr_with_reloc): Likewise.
+ * testsuite/gas/all/overflow.l Change expected output format.
+ * po/gas.pot: Regenerate.
+
+ bfd * coff-rs6000.c (xcoff_reloc_type_tls): Reformat error messages in
+ order to fix problems when translating.
+ * cofflink.c (_bfd_coff_write_global_sym): Likewise.
+ * elfnn-aarch64.c (_bfd_aarch64_erratum_843419_branch_to_stub):
+ Likewise.
+ * po/bfd.pot: Regenerate.
+
+2021-07-07 GDB Administrator <gdbadmin@sourceware.org>
+
+ Automatic date update in version.in
+
+2021-07-06 Simon Marchi <simon.marchi@polymtl.ca>
+
+ gdb: introduce iterator_range, remove next_adapter
+ I was always a bit confused by next_adapter, because it kind of mixes
+ the element type and the iterator type. In reality, it is not much more
+ than a class that wraps two iterators (begin and end). However, it
+ assumes that:
+
+ - you can construct the begin iterator by passing a pointer to the
+ first element of the iterable
+ - you can default-construct iterator to make the end iterator
+
+ I think that by generalizing it a little bit, we can re-use it at more
+ places.
+
+ Rename it to "iterator_range". I think it describes a bit better: it's
+ a range made by wrapping a begin and end iterator. Move it to its own
+ file, since it's not related to next_iterator anymore.
+
+ iterator_range has two constructors. The variadic one, where arguments
+ are forwarded to construct the underlying begin iterator. The end
+ iterator is constructed through default construction. This is a
+ generalization of what we have today.
+
+ There is another constructor which receives already constructed begin
+ and end iterators, useful if the end iterator can't be obtained by
+ default-construction. Or, if you wanted to make a range that does not
+ end at the end of the container, you could pass any iterator as the
+ "end".
+
+ This generalization allows removing some "range" classes, like
+ all_inferiors_range. These classes existed only to pass some arguments
+ when constructing the begin iterator. With iterator_range, those same
+ arguments are passed to the iterator_range constructed and then
+ forwarded to the constructed begin iterator.
+
+ There is a small functional difference in how iterator_range works
+ compared to next_adapter. next_adapter stored the pointer it received
+ as argument and constructeur an iterator in the `begin` method.
+ iterator_range constructs the begin iterator and stores it as a member.
+ Its `begin` method returns a copy of that iterator.
+
+ With just iterator_range, uses of next_adapter<foo> would be replaced
+ with:
+
+ using foo_iterator = next_iterator<foo>;
+ using foo_range = iterator_range<foo_iterator>;
+
+ However, I added a `next_range` wrapper as a direct replacement for
+ next_adapter<foo>. IMO, next_range is a slightly better name than
+ next_adapter.
+
+ The rest of the changes are applications of this new class.
+
+ gdbsupport/ChangeLog:
+
+ * next-iterator.h (class next_adapter): Remove.
+ * iterator-range.h: New.
+
+ gdb/ChangeLog:
+
+ * breakpoint.h (bp_locations_range): Remove.
+ (bp_location_range): New.
+ (struct breakpoint) <locations>: Adjust type.
+ (breakpoint_range): Use iterator_range.
+ (tracepoint_range): Use iterator_range.
+ * breakpoint.c (breakpoint::locations): Adjust return type.
+ * gdb_bfd.h (gdb_bfd_section_range): Use iterator_range.
+ * gdbthread.h (all_threads_safe): Pass argument to
+ all_threads_safe_range.
+ * inferior-iter.h (all_inferiors_range): Use iterator_range.
+ (all_inferiors_safe_range): Use iterator_range.
+ (all_non_exited_inferiors_range): Use iterator_range.
+ * inferior.h (all_inferiors, all_non_exited_inferiors): Pass
+ inferior_list as argument.
+ * objfiles.h (struct objfile) <compunits_range>: Remove.
+ <compunits>: Return compunit_symtab_range.
+ * progspace.h (unwrapping_objfile_iterator)
+ <unwrapping_objfile_iterator>: Take parameter by value.
+ (unwrapping_objfile_range): Use iterator_range.
+ (struct program_space) <objfiles_range>: Define with "using".
+ <objfiles>: Adjust.
+ <objfiles_safe_range>: Define with "using".
+ <objfiles_safe>: Adjust.
+ <solibs>: Return so_list_range, define here.
+ * progspace.c (program_space::solibs): Remove.
+ * psymtab.h (class psymtab_storage) <partial_symtab_iterator>:
+ New.
+ <partial_symtab_range>: Use iterator_range.
+ * solist.h (so_list_range): New.
+ * symtab.h (compunit_symtab_range):
+ New.
+ (symtab_range): New.
+ (compunit_filetabs): Change to a function.
+ * thread-iter.h (inf_threads_range,
+ inf_non_exited_threads_range, safe_inf_threads_range,
+ all_threads_safe_range): Use iterator_range.
+ * top.h (ui_range): New.
+ (all_uis): Use ui_range.
+
+ Change-Id: Ib7a9d2a3547f45f01aa1c6b24536ba159db9b854
+
+2021-07-06 Simon Marchi <simon.marchi@polymtl.ca>
+
+ gdb/testsuite: restore configure script
+ Commit f99d1d37496f ("Remove gdb/testsuite/configure") removed
+ gdb/testsuite/configure, as anything gdb/testsuite/configure did could
+ be done by gdb/configure.
+
+ There is however one use case that popped up when this changed
+ propagated to downstream consumers, to run the testsuite on an already
+ built GDB. In the workflow of ROCm-GDB at AMD, a GDB package is built
+ in a CI job. This GDB package is then tested on different machines /
+ hardware configurations as part of other CI jobs. To achieve this,
+ those CI jobs only configure the testsuite directory and run "make
+ check" with an appropriate board file.
+
+ In light of this use case, the way I see it is that gdb/testsuite could
+ be considered its own project. It could be stored in a completely
+ different repo if we want to, it just happens to be stored inside gdb/.
+
+ Since the only downside of having gdb/testsuite/configure is that it
+ takes a few more seconds to run, but on the other hand it's quite useful
+ for some people, I propose re-adding it.
+
+ In a sense, this is revert of f99d1d37496f, but it's not a direct
+ git-revert, as some things have changed since.
+
+ gdb/ChangeLog:
+
+ * configure.ac: Remove things that were moved from
+ testsuite/configure.ac.
+ * configure: Re-generate.
+
+ gdb/testsuite/ChangeLog:
+
+ * configure.ac: Restore.
+ * configure: Re-generate.
+ * aclocal.m4: Re-generate.
+ * Makefile.in (distclean): Add config.status.
+ (Makefile): Adjust paths.
+ (lib/pdtrace): Adjust paths.
+ (config.status): Add.
+
+ Change-Id: Ic38c79485e1835712d9c99649c9dfb59667254f1
+
+2021-07-06 Joel Brobecker <brobecker@adacore.com>
+
+ Rename gdb/ChangeLog to gdb/ChangeLog-2021
+ Now that ChangeLog entries are no longer used for GDB patches,
+ this commit renames the file gdb/ChangeLog to gdb/ChangeLog-2021,
+ similar to what we would do in the context of the "Start of New
+ Year" procedure.
+
+ The purpose of this change is to avoid people merging ChangeLog
+ entries by mistake when applying existing commits that they are
+ currently working on.
+
+2021-07-06 Dan Streetman <ddstreet@canonical.com>
+
+ sim: ppc: add missing empty targets
+ These are copied from sim/common/Make-common.in.
+
+ On ppc the build fails without at least the 'info' target, e.g.:
+
+ Making info in ppc
+ make[4]: Entering directory '/<<BUILDDIR>>/gdb-10.2.2974.g5b45e89f56d+21.10.20210510155809/build/default/sim/ppc'
+ make[4]: *** No rule to make target 'info'. Stop.
+
+2021-07-06 Yuri Chornoivan <yurchor@ukr.net>
+
+ PR 28053: Fix spelling mistakes: usupported -> unsupported and relocatation -> relocation.
+
+2021-07-06 Michael Matz <matz@suse.de>
+
+ elf/riscv: Fix relaxation with aliases [PR28021]
+ the fix for PR22756 only changed behaviour for hidden aliases,
+ but the same situation exists for non-hidden aliases: sym_hashes[]
+ can contain multiple entries pointing to the same symbol structure
+ leading to relaxation adjustment to be applied twice.
+
+ Fix this by testing for duplicates for everything that looks like it
+ has a version.
+
+ PR ld/28021
+
+ bfd/
+ * elfnn-riscv.c (riscv_relax_delete_bytes): Check for any
+ versioning.
+
+ ld/
+ * testsuite/ld-riscv-elf/relax-twice.ver: New.
+ * testsuite/ld-riscv-elf/relax-twice-1.s: New.
+ * testsuite/ld-riscv-elf/relax-twice-2.s: New.
+ * testsuite/ld-riscv-elf/ld-riscv-elf.exp
+ (run_relax_twice_test): New, and call it.
+
+2021-07-06 Pedro Alves <pedro@palves.net>
+ Qingchuan Shi <qingchuan.shi@amd.com>
+
+ Update gdb performance testsuite to be compatible with Python 3.8
+ Running "make check-perf" on a system with Python 3.8 (e.g., Ubuntu
+ 20.04) runs into this Python problem:
+
+ Traceback (most recent call last):
+ File "<string>", line 1, in <module>
+ File "/home/pedro/rocm/gdb/src/gdb/testsuite/gdb.perf/lib/perftest/perftest.py", line 65, in run
+ self.execute_test()
+ File "<string>", line 35, in execute_test
+ File "/home/pedro/rocm/gdb/src/gdb/testsuite/gdb.perf/lib/perftest/measure.py", line 45, in measure
+ m.start(id)
+ File "/home/pedro/rocm/gdb/src/gdb/testsuite/gdb.perf/lib/perftest/measure.py", line 102, in start
+ self.start_time = time.clock()
+ AttributeError: module 'time' has no attribute 'clock'
+ Error while executing Python code.
+ (gdb) FAIL: gdb.perf/single-step.exp: python SingleStep(1000).run()
+
+ ... many times over.
+
+ The problem is that the testsuite is using time.clock(), deprecated in
+ Python 3.3 and finaly removed in Python 3.8. The guidelines say to
+ use time.perf_counter() or time.process_time() instead depending on
+ requirements. Looking at the current description of those functions,
+ at:
+
+ https://docs.python.org/3.10/library/time.html
+
+ we have:
+
+ time.perf_counter() -> float
+
+ Return the value (in fractional seconds) of a performance
+ counter, i.e. a clock with the highest available resolution to
+ measure a short duration. It does include time elapsed during
+ sleep and is system-wide. (...)
+
+ time.process_time() -> float
+
+ Return the value (in fractional seconds) of the sum of the
+ system and user CPU time of the current process. It does not
+ include time elapsed during sleep. It is process-wide by
+ definition. (...)
+
+ I'm thinking that it's just best to record both instead of picking
+ one. So this patch replaces the MeasurementCpuTime measurement class
+ with two new classes -- MeasurementPerfCounter and
+ MeasurementProcessTime. Correspondingly, this changes the reports in
+ testsuite/perftest.log -- we have two new "perf_counter" and
+ "process_time" measurements and the "cpu_time" measurement is gone. I
+ don't suppose breaking backward compatibility here is a big problem.
+ I suspect no one is really tracking long term performance using the
+ perf testsuite today. And if they are, it shouldn't be hard to adjust.
+
+ For backward compatility, with Python < 3.3, both perf_counter and
+ process_time use the old time.clock.
+
+ gdb/testsuite/ChangeLog:
+ yyyy-mm-dd Qingchuan Shi <qingchuan.shi@amd.com>
+ Pedro Alves <pedro@palves.net>
+
+ * gdb.perf/lib/perftest/perftest.py: Import sys.
+ (time.perf_counter, time.process_time): Map to time.clock on
+ Python < 3.3.
+ (MeasurementCpuTime): Delete, replaced by...
+ (MeasurementPerfCounter, MeasurementProcessTime): .. these two new
+ classes.
+ * gdb.perf/lib/perftest/perftest.py: Import MeasurementPerfCounter
+ and MeasurementProcessTime instead of MeasurementCpuTime.
+ (TestCaseWithBasicMeasurements): Use MeasurementPerfCounter and
+ MeasurementProcessTime instead of MeasurementCpuTime.
+
+
+ Change-Id: Ia850c05d5ce57d2dada70ba5b0061f566444aa2b
+
+2021-07-06 Pedro Alves <pedro@palves.net>
+
+ gdb.perf/: FAIL on Python errors, avoid "ERROR: internal buffer is full"
+ Currently, if you run make check-perf on a system with Python 3.8,
+ tests seen to PASS, but they actually test a lot less than intended,
+ due to:
+
+ PerfTest::assemble, run ...
+ python BackTrace(64).run()
+ Traceback (most recent call last):
+ File "<string>", line 1, in <module>
+ File "/home/pedro/rocm/gdb/src/gdb/testsuite/gdb.perf/lib/perftest/perftest.py", line 65, in run
+ self.execute_test()
+ File "<string>", line 49, in execute_test
+ File "/home/pedro/rocm/gdb/src/gdb/testsuite/gdb.perf/lib/perftest/measure.py", line 45, in measure
+ m.start(id)
+ File "/home/pedro/rocm/gdb/src/gdb/testsuite/gdb.perf/lib/perftest/measure.py", line 102, in start
+ self.start_time = time.clock()
+ AttributeError: module 'time' has no attribute 'clock'
+ Error while executing Python code.
+ (gdb) PASS: gdb.perf/backtrace.exp: python BackTrace(64).run()
+
+ And then, after fixing the above Python compatibility issues (which
+ will be a separate patch), I get 86 instances of overflowing expect's
+ buffer, like:
+
+ ERROR: internal buffer is full.
+ UNRESOLVED: gdb.perf/single-step.exp: python SingleStep(1000).run()
+
+ This patch fixes both problems by adding & using a gdb_test_python_run
+ routine that:
+
+ - checks for Python errors
+ - consumes output line by line
+
+ gdb/testsuite/ChangeLog:
+ yyyy-mm-dd Pedro Alves <pedro@palves.net>
+
+ * gdb.perf/backtrace.exp: Use gdb_test_python_run.
+ * gdb.perf/disassemble.exp: Use gdb_test_python_run.
+ * gdb.perf/single-step.exp: Use gdb_test_python_run.
+ * gdb.perf/skip-command.exp: Use gdb_test_python_run.
+ * gdb.perf/skip-prologue.exp: Use gdb_test_python_run.
+ * gdb.perf/solib.exp: Use gdb_test_python_run.
+ * gdb.perf/template-breakpoints.exp: Use gdb_test_python_run.
+ * lib/perftest.exp (gdb_test_python_run): New.
+
+ Change-Id: I007af36f164b3f4cda41033616eaaa4e268dfd2f
+
+2021-07-06 Tom de Vries <tdevries@suse.de>
+
+ [gdb/testsuite] Remove read1 timeout factor from gdb.base/info-macros.exp
+ At the moment some check-read1 timeouts are handled like this in
+ gdb.base/info-macros.exp:
+ ...
+ gdb_test_multiple_with_read1_timeout_factor 10 "$test" $testname {
+ -re "$r1$r2$r3" {
+ pass $testname
+ }
+ -re ".*#define TWO.*\r\n$gdb_prompt" {
+ fail $testname
+ }
+ -re ".*#define THREE.*\r\n$gdb_prompt" {
+ fail $testname
+ }
+ -re ".*#define FOUR.*\r\n$gdb_prompt" {
+ fail $testname
+ }
+ }
+ ...
+ which is not ideal.
+
+ We could use gdb_test_lines, but it currently doesn't support verifying
+ the absence of regexps, which is done using the clauses above calling fail.
+
+ Fix this by using gdb_test_lines and adding a -re-not syntax to
+ gdb_test_lines, such that we can do:
+ ...
+ gdb_test_lines $test $testname $r1.*$r2 \
+ -re-not "#define TWO" \
+ -re-not "#define THREE" \
+ -re-not "#define FOUR"
+ ...
+
+ Tested on x86_64-linux, whith make targets check and check-read1.
+
+ Also observed that check-read1 execution time is reduced from 6m35s to 13s.
+
+ gdb/testsuite/ChangeLog:
+
+ 2021-07-06 Tom de Vries <tdevries@suse.de>
+
+ * gdb.base/info-macros.exp: Replace use of
+ gdb_test_multiple_with_read1_timeout_factor with gdb_test_lines.
+ (gdb_test_multiple_with_read1_timeout_factor): Remove.
+ * lib/gdb.exp (gdb_test_lines): Add handling or -re-not <regexp>.
+
+2021-07-06 Nelson Chu <nelson.chu@sifive.com>
+
+ RISC-V: Fix the build broken with -Werror.
+ ChangeLog:
+
+ bfd/
+
+ * elfnn-riscv.c(riscv_elf_additional_program_headers): Removed the
+ unused variable s.
+ (riscv_elf_modify_segment_map): Added ATTRIBUTE_UNUSED for the
+ unused parameter info.
+
+2021-07-06 Tom de Vries <tdevries@suse.de>
+
+ [gdb/symtab] Fix skipping of import of C++ CU
+ Tom Tromey observed that when changing the language in
+ gdb.dwarf2/imported-unit-bp.exp from c to c++, the test failed.
+
+ This is due to this code in process_imported_unit_die:
+ ...
+ /* We're importing a C++ compilation unit with tag DW_TAG_compile_unit
+ into another compilation unit, at root level. Regard this as a hint,
+ and ignore it. */
+ if (die->parent && die->parent->parent == NULL
+ && per_cu->unit_type == DW_UT_compile
+ && per_cu->lang == language_cplus)
+ return;
+ ...
+ which should have a partial symtabs counterpart.
+
+ Add the missing counterpart in process_psymtab_comp_unit.
+
+ Tested on x86_64-linux (openSUSE Leap 15.2), no regressions for config:
+ - using default gcc version 7.5.0
+ (with 5 unexpected FAILs)
+ - gcc 10.3.0 and target board
+ unix/-flto/-O0/-flto-partition=none/-ffat-lto-objects
+ (with 1000 unexpected FAILs)
+
+ gdb/ChangeLog:
+
+ 2021-07-06 Tom de Vries <tdevries@suse.de>
+
+ * dwarf2/read.c (scan_partial_symbols): Skip top-level imports of
+ c++ CU.
+ * testsuite/gdb.dwarf2/imported-unit-bp.exp: Moved to ...
+ * testsuite/gdb.dwarf2/imported-unit-bp.exp.tcl: ... here.
+ * testsuite/gdb.dwarf2/imported-unit-bp-c++.exp: New test.
+ * testsuite/gdb.dwarf2/imported-unit-bp-c.exp: New test.
+ * testsuite/gdb.dwarf2/imported-unit.exp: Update.
+
+2021-07-06 Kito Cheng <kito.cheng@sifive.com>
+
+ RISC-V: Add PT_RISCV_ATTRIBUTES and add it to PHDR.
+ We added PT_RISCV_ATTRIBUTES to program header to make
+ .riscv.attribute easier to find in dynamic loader or kernel.
+
+ Ref:
+ https://github.com/riscv/riscv-elf-psabi-doc/pull/71
+
+ ChangeLog:
+
+ bfd/
+
+ * elfnn-riscv.c(RISCV_ATTRIBUTES_SECTION_NAME): New.
+ (riscv_elf_additional_program_headers): Ditto.
+ (riscv_elf_modify_segment_map): Ditto.
+ (elf_backend_additional_program_headers): Ditto.
+ (elf_backend_modify_segment_map): Ditto.
+ (elf_backend_obj_attrs_section): Use RISCV_ATTRIBUTES_SECTION_NAME
+ rather than string literal.
+
+ binutils/
+
+ * readelf.c(get_riscv_segment_type): New.
+ (get_segment_type): Handle EM_RISCV.
+
+ include/
+
+ * elf/riscv.h (PT_RISCV_ATTRIBUTES): New.
+ * testsuite/ld-elf/orphan-region.ld: Discard .riscv.attributes
+ section for simplify testcase.
+ * testsuite/ld-riscv-elf/attr-phdr.d: New.
+ * testsuite/ld-riscv-elf/attr-phdr.s: Ditto.
+ * testsuite/ld-riscv-elf/ld-riscv-elf.exp: Add attr-phdr to
+ testcase.
+
+2021-07-06 Alan Modra <amodra@gmail.com>
+
+ Re: PR28055, segfault in bpf special reloc function
+ PR 28055
+ * elf64-bpf.c (bpf_elf_generic_reloc): Add missing ATTRIBUTE_UNUSED.
+
+2021-07-06 GDB Administrator <gdbadmin@sourceware.org>
+
+ Automatic date update in version.in
+
+2021-07-05 Tom Tromey <tom@tromey.com>
+
+ Simplify debug_names index writing
+ This changes the .debug_names writer to find the TU indices in the
+ main loop over all CUs and TUs. (An earlier patch applied this same
+ treatment to the .gdb_index writer.)
+
+ Simplify gdb_index writing
+ write_gdbindex writes the CUs first, then walks the signatured type
+ hash table to write out the TUs. However, now that CUs and TUs are
+ unified in the DWARF reader, it's simpler to handle both of these in
+ the same loop.
+
+ Minor cleanup to addrmap_index_data::previous_valid
+ This changes addrmap_index_data::previous_valid to a bool, and
+ initializes it inline.
+
+2021-07-05 Tom Tromey <tom@tromey.com>
+
+ Fix oddity in write_gdbindex
+ My recent patch to unify CUs and TUs introduced an oddity in
+ write_gdbindex. Here, we pass 'i' to recursively_write_psymbols, but
+ we must instead pass 'counter', to handle the situation where a TU is
+ mixed in with the CUs.
+
+ I am not sure a test case for this is possible. I think it can only
+ happen when using DWARF 5, where a TU appears in .debug_info.
+ However, this situation is already not handled correctly by
+ .gdb_index. I filed a bug about this.
+
+2021-07-05 Tom Tromey <tom@tromey.com>
+
+ Fix warning in symtab.c
+ The compiler gives this warning when building symtab.c:
+
+ ../../binutils-gdb/gdb/symtab.c:4247:28: warning: 'to_match' may be used uninitialized in this function [-Wmaybe-uninitialized]
+
+ This patch fixes the warning by adding a gdb_assert_not_reached.
+
+2021-07-05 H.J. Lu <hjl.tools@gmail.com>
+
+ ld: Cache and reuse the IR archive file descriptor
+ Linker plugin_object_p opens the IR archive for each IR archive member.
+ For GCC plugin, plugin_object_p closes the archive file descriptor. But
+ for LLVM plugin, the archive file descriptor remains open. If there are
+ 3000 IR archive members, there are 3000 file descriptors for them. We
+ can run out of file descriptors petty easily.
+
+ 1. Add archive_plugin_fd and archive_plugin_fd_open_count to bfd so that
+ we can cache and reuse the IR archive file descriptor for all IR archive
+ members in the archive.
+ 2. Add bfd_plugin_close_file_descriptor to properly close the IR archive
+ file descriptor.
+
+ bfd/
+
+ PR ld/28040
+ * archive.c (_bfd_archive_close_and_cleanup): Close the archive
+ plugin file descriptor if needed.
+ * bfd.c (bfd): Add archive_plugin_fd and
+ archive_plugin_fd_open_count.
+ * opncls.c (_bfd_new_bfd): Initialize to -1.
+ * plugin.c (bfd_plugin_open_input): Cache and reuse the archive
+ plugin file descriptor.
+ (bfd_plugin_close_file_descriptor): New function.
+ (try_claim): Call bfd_plugin_close_file_descriptor.
+ * plugin.h (bfd_plugin_close_file_descriptor): New.
+ * bfd-in2.h: Regenerated.
+
+ ld/
+
+ PR ld/28040
+ * plugin.c (plugin_input_file): Add ibfd.
+ (release_plugin_file_descriptor): New function.
+ (release_input_file): Call release_plugin_file_descriptor to
+ close input->fd.
+ (plugin_object_p): Call release_plugin_file_descriptor to close
+ input->fd. Also call release_plugin_file_descriptor if not
+ claimed.
+ * testsuite/config/default.exp (RANLIB): New.
+ * testsuite/ld-plugin/lto.exp: Run ranlib test.
+
+2021-07-05 Nick Clifton <nickc@redhat.com>
+
+ Restore the libiberty component of commit 50ad1254d5030d0804cbf89c758359ae202e8d55.
+ This commit has not yet been applied to the master sources in the gcc repository.
+ It was submitted here: https://gcc.gnu.org/pipermail/gcc-patches/2021-July/574405.html
+ The commit allows options to be set for the AR and RANLIB programs used when building libiberty, which in turn allows building with LTO enabled.
+
+ Updated translations (mainly Ukranian and French) triggered by creation of 2.37 branch.
+
+2021-07-05 Tom de Vries <tdevries@suse.de>
+
+ [gdb/testsuite] Fix fail in gdb.fortran/ptype-on-functions.exp with gcc-7
+ Since commit 05b85772061 "gdb/fortran: Add type info of formal parameter for
+ clang" I see:
+ ...
+ (gdb) ptype say_string^M
+ type = void (character*(*), integer(kind=4))^M
+ (gdb) FAIL: gdb.fortran/ptype-on-functions.exp: ptype say_string
+ ...
+
+ The part of the commit causing the fail is:
+ ...
+ gdb_test "ptype say_string" \
+ - "type = void \\(character\\*\\(\\*\\), integer\\(kind=\\d+\\)\\)"
+ + "type = void \\(character\[^,\]+, $integer8\\)"
+ ...
+ which fails to take into account that for gcc-7 and before, the type for
+ string length of a string argument is int, not size_t.
+
+ Fix this by allowing both $integer8 and $integer4.
+
+ Tested on x86_64-linux, with gcc-7 and gcc-10.
+
+ gdb/testsuite/ChangeLog:
+
+ 2021-07-05 Tom de Vries <tdevries@suse.de>
+
+ * gdb.fortran/ptype-on-functions.exp: Allow both $integer8 and
+ $integer4 for size of string length.
+
+2021-07-05 Simon Marchi <simon.marchi@polymtl.ca>
+
+ gdb: fall back on sigpending + sigwait if sigtimedwait is not available
+ The macOS platform does not provide sigtimedwait, so we get:
+
+ CXX compile/compile.o
+ In file included from /Users/smarchi/src/binutils-gdb/gdb/compile/compile.c:46:
+ /Users/smarchi/src/binutils-gdb/gdb/../gdbsupport/scoped_ignore_signal.h:69:4: error: use of undeclared identifier 'sigtimedwait'
+ sigtimedwait (&set, nullptr, &zero_timeout);
+ ^
+
+ An alternative to sigtimedwait with a timeout of 0 is to use sigpending,
+ to first check which signals are pending, and then sigwait, to consume
+ them. Since that's slightly more expensive (2 syscalls instead of 1),
+ keep using sigtimedwait for the platforms that provide it, and fall back
+ to sigpending + sigwait for the others.
+
+ gdbsupport/ChangeLog:
+
+ * scoped_ignore_signal.h (struct scoped_ignore_signal)
+ <~scoped_ignore_signal>: Use sigtimedwait if HAVE_SIGTIMEDWAIT
+ is defined, else use sigpending + sigwait.
+
+ Change-Id: I2a72798337e81dd1bbd21214736a139dd350af87
+ Co-Authored-By: John Baldwin <jhb@FreeBSD.org>
+
+2021-07-05 Simon Marchi <simon.marchi@polymtl.ca>
+
+ gdbsupport/common.m4: check for sigtimedwait
+ The next patch will make the use of sigtimedwait conditional to whether
+ the platform provides it. Start by adding a configure check for it.
+
+ gdbsupport/ChangeLog:
+
+ * common.m4 (GDB_AC_COMMON): Check for sigtimedwait.
+ * config.in, configure: Re-generate.
+
+ gdb/ChangeLog:
+
+ * config.in, configure: Re-generate.
+
+ gdbserver/ChangeLog:
+
+ * config.in, configure: Re-generate.
+
+ Change-Id: Ic7613fe14521b966b4d991bbcd0933ab14629c05
+
+2021-07-05 Alan Modra <amodra@gmail.com>
+
+ Re: opcodes: constify & local meps macros
+ Commit f375d32b35ce changed a generated file. Edit the source instead.
+
+ * mep.opc (macros): Make static and const.
+ (lookup_macro): Return and use const pointer.
+ (expand_macro): Make mac param const.
+ (expand_string): Make pmacro const.
+
+2021-07-05 Alan Modra <amodra@gmail.com>
+
+ PR28055, segfault in bpf special reloc function
+ The testcase in this PR tickled two bugs fixed here. output_bfd is
+ NULL when a reloc special_function is called for final linking and
+ when called from bfd_generic_get_relocated_section_contents. Clearly
+ using output_bfd is wrong as it results in segfaults. Not only that,
+ the endianness of the reloc field really should be that of the input.
+ The second bug was not checking that the entire reloc field was
+ contained in the section contents.
+
+ PR 28055
+ * elf64-bpf.c (bpf_elf_generic_reloc): Use correct bfd for bfd_put
+ and bfd_put_32 calls. Correct section limit checks.
+
+2021-07-05 Alan Modra <amodra@gmail.com>
+
+ PR28047, readelf crash due to assertion failure
+ DW_FORM_ref1, DW_FORM_ref2, DW_FORM_ref4, DW_FORM_ref1, and
+ DW_FORM_ref_udata are all supposed to be within the containing unit.
+
+ PR 28047
+ * dwarf.c (get_type_abbrev_from_form): Add cu_end parameter.
+ Check DW_FORM_ref1 etc. arg against cu_end rather than end of
+ section. Adjust all callers.
+
+2021-07-05 GDB Administrator <gdbadmin@sourceware.org>
+
+ Automatic date update in version.in
+
+2021-07-04 Simon Marchi <simon.marchi@polymtl.ca>
+
+ gdb: return early if no execution in darwin_solib_create_inferior_hook
+ When loading a file using the file command on macOS, we get:
+
+ $ ./gdb -nx --data-directory=data-directory -q -ex "file ./test"
+ Reading symbols from ./test...
+ Reading symbols from /Users/smarchi/build/binutils-gdb/gdb/test.dSYM/Contents/Resources/DWARF/test...
+ /Users/smarchi/src/binutils-gdb/gdb/thread.c:72: internal-error: struct thread_info *inferior_thread(): Assertion `current_thread_ != nullptr' failed.
+ A problem internal to GDB has been detected,
+ further debugging may prove unreliable.
+ Quit this debugging session? (y or n)
+
+ The backtrace is:
+
+ * frame #0: 0x0000000101fcb826 gdb`internal_error(file="/Users/smarchi/src/binutils-gdb/gdb/thread.c", line=72, fmt="%s: Assertion `%s' failed.") at errors.cc:52:3
+ frame #1: 0x00000001018a2584 gdb`inferior_thread() at thread.c:72:3
+ frame #2: 0x0000000101469c09 gdb`get_current_regcache() at regcache.c:421:31
+ frame #3: 0x00000001015f9812 gdb`darwin_solib_get_all_image_info_addr_at_init(info=0x0000603000006d00) at solib-darwin.c:464:34
+ frame #4: 0x00000001015f7a04 gdb`darwin_solib_create_inferior_hook(from_tty=1) at solib-darwin.c:515:5
+ frame #5: 0x000000010161205e gdb`solib_create_inferior_hook(from_tty=1) at solib.c:1200:3
+ frame #6: 0x00000001016d8f76 gdb`symbol_file_command(args="./test", from_tty=1) at symfile.c:1650:7
+ frame #7: 0x0000000100abab17 gdb`file_command(arg="./test", from_tty=1) at exec.c:555:3
+ frame #8: 0x00000001004dc799 gdb`do_const_cfunc(c=0x000061100000c340, args="./test", from_tty=1) at cli-decode.c:102:3
+ frame #9: 0x00000001004ea042 gdb`cmd_func(cmd=0x000061100000c340, args="./test", from_tty=1) at cli-decode.c:2160:7
+ frame #10: 0x00000001018d4f59 gdb`execute_command(p="t", from_tty=1) at top.c:674:2
+ frame #11: 0x0000000100eee430 gdb`catch_command_errors(command=(gdb`execute_command(char const*, int) at top.c:561), arg="file ./test", from_tty=1, do_bp_actions=true)(char const*, int), char const*, int, bool) at main.c:523:7
+ frame #12: 0x0000000100eee902 gdb`execute_cmdargs(cmdarg_vec=0x00007ffeefbfeba0 size=1, file_type=CMDARG_FILE, cmd_type=CMDARG_COMMAND, ret=0x00007ffeefbfec20) at main.c:618:9
+ frame #13: 0x0000000100eed3a4 gdb`captured_main_1(context=0x00007ffeefbff780) at main.c:1322:3
+ frame #14: 0x0000000100ee810d gdb`captured_main(data=0x00007ffeefbff780) at main.c:1343:3
+ frame #15: 0x0000000100ee8025 gdb`gdb_main(args=0x00007ffeefbff780) at main.c:1368:7
+ frame #16: 0x00000001000044f1 gdb`main(argc=6, argv=0x00007ffeefbff8a0) at gdb.c:32:10
+ frame #17: 0x00007fff20558f5d libdyld.dylib`start + 1
+
+ The solib_create_inferior_hook call in symbol_file_command was added by
+ commit ea142fbfc9c1 ("Fix breakpoints on file reloads for PIE
+ binaries"). It causes solib_create_inferior_hook to be called while
+ the inferior is not running, which darwin_solib_create_inferior_hook
+ does not expect. darwin_solib_get_all_image_info_addr_at_init, in
+ particular, assumes that there is a current thread, as it tries to get
+ the current thread's regcache.
+
+ Fix it by adding a target_has_execution check and returning early. Note
+ that there is a similar check in svr4_solib_create_inferior_hook.
+
+ gdb/ChangeLog:
+
+ * solib-darwin.c (darwin_solib_create_inferior_hook): Return
+ early if no execution.
+
+ Change-Id: Ia11dd983a1e29786e5ce663d0fcaa6846dc611bb
+
+2021-07-04 GDB Administrator <gdbadmin@sourceware.org>
+
+ Automatic date update in version.in
+
+2021-07-03 H.J. Lu <hjl.tools@gmail.com>
+
+ gprof: Regenerate configure
+ * configure: Regenerated.
+
+2021-07-03 Joel Brobecker <brobecker@adacore.com>
+
+ Update NEWS post GDB 11 branch creation.
+ gdb/ChangeLog:
+
+ * NEWS: Create a new section for the next release branch.
+ Rename the section of the current branch, now that it has
+ been cut.
+
+2021-07-03 Joel Brobecker <brobecker@adacore.com>
+
+ Bump version to 12.0.50.DATE-git.
+ Now that the GDB 11 branch has been created, we can
+ bump the version number.
+
+ gdb/ChangeLog:
+
+ GDB 11 branch created (4b51505e33441c6165e7789fa2b6d21930242927):
+ * version.in: Bump version to 12.0.50.DATE-git.
+
+ gdb/testsuite/ChangeLog:
+
+ * gdb.base/default.exp: Change $_gdb_major to 12.
+
+2021-07-03 Tom Tromey <tom@tromey.com>
+
+ Use 'bool' more idiomatically in dwarf_decode_lines
+ I noticed a couple of spots related to dwarf_decode_lines where the
+ 'include_p' field was not being used idiomatically -- it is of type
+ bool now, so treat it as such.
+
+ gdb/ChangeLog
+ 2021-07-03 Tom Tromey <tom@tromey.com>
+
+ * dwarf2/read.c (lnp_state_machine::record_line): Use 'true'.
+ (dwarf_decode_lines): Remove '=='.
+
+2021-07-03 Nick Clifton <nickc@redhat.com>
+
+ More minor updates to the how-to-make-a-release documentation
+
+ Update version number and regenerate files
+
+ Add markers for 2.37 branch
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 1, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0 } },
{ { { 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 0, 0, 1, 1, 1, 0, 0, 0,
0, 0, 0, 0, 1, 0 } },
{ { 0, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 1, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0 } },
{ { { 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 1, 1, 1, 0, 1, 0,
0, 0, 0, 0, 1, 0 } },
{ { 0, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0,
0, 0, 0, 0, 0, 0 } },
{ { 1, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 1, 1, 1, 0, 1, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 0, 0, 0, 1, 0, 1, 1, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0 } },
{ { 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 0, 0, 0, 1, 0, 1, 1, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0 } },
{ { 1, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 1, 1, 1, 0, 1, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 1, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0 } },
{ { { 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0 } },
{ { 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 2, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0 } },
{ { 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 0, 1, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 2, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0 } },
{ { 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 1, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 0, 1, 0,
0, 0, 0, 0, 0, 0 } },
{ { 2, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 1, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0 } },
{ { { 3, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0 } },
{ { 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 1, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0 } },
{ { { 3, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0 } },
{ { 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 1, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0 } },
{ { { 4, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0 } },
{ { 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 1, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0 } },
{ { { 4, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0 } },
{ { 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 1, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0 } },
{ { { 5, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0 } },
{ { 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 1, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0 } },
{ { { 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 1, 1, 1, 0, 1, 0,
0, 0, 0, 0, 1, 0 } },
{ { 0, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 1, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0 } },
{ { { 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0 } },
{ { 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 1, 1, 0, 1, 0,
0, 0, 0, 0, 1, 0 } },
{ { 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 0, 1, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 1, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 1, 0, 0, 0, 0, 0,
0, 0, 0, 0, 1, 0 } },
{ { 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 0, 1, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 1, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 1, 0, 0, 0, 0,
0, 0, 0, 0, 1, 0 } },
{ { 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 1, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 1, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0 } },
{ { { 1, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 1, 0, 1, 0, 0, 1, 0, 0, 0,
0, 0, 0, 0, 1, 0 } },
{ { 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 1, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 1, 1, 0, 0, 0, 0,
0, 0, 0, 0, 1, 0 } },
{ { 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 0, 1, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 1, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0 } },
{ { { 1, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 1, 0, 1, 0, 0, 1, 0, 0, 0,
0, 0, 0, 0, 1, 0 } },
{ { 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 1, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 1, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0 } },
{ { { 1, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 1, 0, 1, 0, 0, 1, 0, 0, 0,
0, 0, 0, 0, 1, 0 } },
{ { 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 1, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 1, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0 } },
{ { { 1, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 1, 0, 1, 0, 0, 1, 0, 0, 0,
0, 0, 0, 0, 1, 0 } },
{ { 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 1, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0 } },
{ { { 1, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 1, 0, 1, 0, 1, 0, 0, 0, 0,
0, 0, 0, 0, 1, 0 } },
{ { 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 1, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 1, 0, 0, 0, 0, 0,
0, 0, 0, 0, 1, 0 } },
{ { 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 0, 1, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 1, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 1, 0, 0, 0, 0,
0, 0, 0, 0, 1, 0 } },
{ { 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 1, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 1, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 1, 1, 0, 0, 0, 0,
0, 0, 0, 0, 1, 0 } },
{ { 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 0, 1, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 1, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0 } },
{ { { 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 0, 0, 0,
0, 0, 0, 0, 0, 0 } } } },
{ MN_push, 0xff, 1, SPACE_BASE, 6,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 1, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0 } },
{ { { 1, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 1, 1, 0, 0, 0,
0, 0, 0, 0, 1, 0 } } } },
{ MN_push, 0x6a, 1, SPACE_BASE, None,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 1, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0 } },
{ { { 0, 0, 0, 0, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0 } } } },
{ MN_push, 0x68, 1, SPACE_BASE, None,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 1, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0 } },
{ { { 0, 0, 0, 0, 0, 1, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0 } } } },
{ MN_push, 0x06, 1, SPACE_BASE, None,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 1, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0 } },
{ { { 2, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0 } } } },
{ MN_push, 0x50, 1, SPACE_BASE, None,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 1, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0 } },
{ { { 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0, 1, 0,
0, 0, 0, 0, 0, 0 } } } },
{ MN_push, 0xff, 1, SPACE_BASE, 6,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 1, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0 } },
{ { { 1, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 1, 0, 1, 0, 1, 0, 0, 1, 0,
0, 0, 0, 0, 1, 0 } } } },
{ MN_push, 0x6a, 1, SPACE_BASE, None,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 1, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0 } },
{ { { 0, 0, 0, 0, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0 } } } },
{ MN_push, 0x68, 1, SPACE_BASE, None,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 1, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0 } },
{ { { 0, 0, 0, 0, 0, 1, 0, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0 } } } },
{ MN_push, 0xa0, 1, SPACE_0F, None,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 1, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0 } },
{ { { 2, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0 } } } },
{ MN_pusha, 0x60, 0, SPACE_BASE, None,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 1, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0 } },
{ { { 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0 } } } },
{ MN_pop, 0x58, 1, SPACE_BASE, None,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 1, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0 } },
{ { { 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 0, 0, 0,
0, 0, 0, 0, 0, 0 } } } },
{ MN_pop, 0x8f, 1, SPACE_BASE, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 1, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0 } },
{ { { 1, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 1, 1, 0, 0, 0,
0, 0, 0, 0, 1, 0 } } } },
{ MN_pop, 0x07, 1, SPACE_BASE, None,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 1, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0 } },
{ { { 2, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0 } } } },
{ MN_pop, 0x58, 1, SPACE_BASE, None,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 1, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0 } },
{ { { 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0, 1, 0,
0, 0, 0, 0, 0, 0 } } } },
{ MN_pop, 0x8f, 1, SPACE_BASE, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 1, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0 } },
{ { { 1, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 1, 0, 1, 0, 1, 0, 0, 1, 0,
0, 0, 0, 0, 1, 0 } } } },
{ MN_pop, 0xa1, 1, SPACE_0F, None,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 1, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0 } },
{ { { 2, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0 } } } },
{ MN_popa, 0x61, 0, SPACE_BASE, None,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 1, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0 } },
{ { { 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0 } } } },
{ MN_xchg, 0x90, 2, SPACE_BASE, None,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 0, 1, 0,
0, 0, 0, 0, 0, 0 } },
{ { 0, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 0, 1, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0,
0, 0, 0, 0, 0, 0 } },
{ { 1, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 1, 1, 1, 0, 1, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 0, 0, 0, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0 } },
{ { 0, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 0, 3, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0 } },
{ { 0, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 0, 0, 0, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0 } } } },
{ MN_in, 0xec, 1, SPACE_BASE, None,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 0, 3, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0 } } } },
{ MN_out, 0xe6, 2, SPACE_BASE, None,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 0, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 0, 0,
0, 0, 0, 0, 0, 0 } },
{ { 0, 0, 0, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 0, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 0, 0,
0, 0, 0, 0, 0, 0 } },
{ { 0, 3, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 0, 0, 0, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0 } } } },
{ MN_out, 0xee, 1, SPACE_BASE, None,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 0, 3, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0 } } } },
{ MN_lea, 0x8d, 2, SPACE_BASE, None,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0 } },
{ { 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 0, 1, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 1, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0 } },
{ { { 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 1, 1, 0, 0,
0, 0, 0, 0, 1, 0 } },
{ { 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 1, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0 } },
{ { { 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 1, 1, 0, 0,
0, 0, 0, 0, 1, 0 } },
{ { 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 1, 1, 0, 0,
0, 0, 0, 0, 1, 0 } },
{ { 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 1, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0 } },
{ { { 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 1, 0, 1, 0, 0, 1, 1, 0, 1,
0, 0, 0, 0, 1, 0 } },
{ { 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 0, 1, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 1, 1, 0, 0,
0, 0, 0, 0, 1, 0 } },
{ { 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 1, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0 } },
{ { { 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 1, 0, 1, 0, 0, 1, 1, 0, 1,
0, 0, 0, 0, 1, 0 } },
{ { 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 0, 1, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 1, 1, 0, 0,
0, 0, 0, 0, 1, 0 } },
{ { 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 1, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0 } },
{ { { 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 1, 0, 1, 0, 0, 1, 1, 0, 1,
0, 0, 0, 0, 1, 0 } },
{ { 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 0, 1, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0 } } } },
{ MN_cld, 0xfc, 0, SPACE_BASE, None,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0 } } } },
{ MN_cli, 0xfa, 0, SPACE_BASE, None,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0 } } } },
{ MN_clts, 0x06, 0, SPACE_0F, None,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0 } } } },
{ MN_cmc, 0xf5, 0, SPACE_BASE, None,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0 } } } },
{ MN_lahf, 0x9f, 0, SPACE_BASE, None,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 1, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0 } },
{ { { 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0 } } } },
{ MN_lahf, 0x9f, 0, SPACE_BASE, None,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0 } } } },
{ MN_sahf, 0x9e, 0, SPACE_BASE, None,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 1, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0 } },
{ { { 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0 } } } },
{ MN_sahf, 0x9e, 0, SPACE_BASE, None,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0 } } } },
{ MN_pushf, 0x9c, 0, SPACE_BASE, None,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 1, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0 } },
{ { { 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0 } } } },
{ MN_pushf, 0x9c, 0, SPACE_BASE, None,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 1, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0 } },
{ { { 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0 } } } },
{ MN_popf, 0x9d, 0, SPACE_BASE, None,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 1, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0 } },
{ { { 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0 } } } },
{ MN_popf, 0x9d, 0, SPACE_BASE, None,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 1, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0 } },
{ { { 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0 } } } },
{ MN_stc, 0xf9, 0, SPACE_BASE, None,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0 } } } },
{ MN_std, 0xfd, 0, SPACE_BASE, None,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0 } } } },
{ MN_sti, 0xfb, 0, SPACE_BASE, None,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0 } } } },
{ MN_add, 0x00, 2, SPACE_BASE, None,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0,
0, 0, 0, 0, 0, 0 } },
{ { 1, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 1, 1, 1, 0, 1, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 0, 0, 0, 0, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0 } },
{ { 1, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 1, 1, 0, 1, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 0, 0, 0, 1, 0, 1, 1, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0 } },
{ { 0, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 0, 0, 0, 1, 0, 1, 1, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0 } },
{ { 1, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 1, 1, 1, 0, 1, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 1, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0 } },
{ { { 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 0, 0, 0,
0, 0, 0, 0, 0, 0 } } } },
{ MN_inc, 0xfe, 1, SPACE_BASE, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 1, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 1, 1, 1, 0, 1, 0,
0, 0, 0, 0, 1, 0 } } } },
{ MN_sub, 0x28, 2, SPACE_BASE, None,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0,
0, 0, 0, 0, 0, 0 } },
{ { 1, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 1, 1, 1, 0, 1, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 0, 0, 0, 0, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0 } },
{ { 1, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 1, 1, 0, 1, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 0, 0, 0, 1, 0, 1, 1, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0 } },
{ { 0, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 0, 0, 0, 1, 0, 1, 1, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0 } },
{ { 1, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 1, 1, 1, 0, 1, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 1, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0 } },
{ { { 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 0, 0, 0,
0, 0, 0, 0, 0, 0 } } } },
{ MN_dec, 0xfe, 1, SPACE_BASE, 1,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 1, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 1, 1, 1, 0, 1, 0,
0, 0, 0, 0, 1, 0 } } } },
{ MN_sbb, 0x18, 2, SPACE_BASE, None,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0,
0, 0, 0, 0, 0, 0 } },
{ { 1, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 1, 1, 1, 0, 1, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 0, 0, 0, 0, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0 } },
{ { 1, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 1, 1, 0, 1, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 0, 0, 0, 1, 0, 1, 1, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0 } },
{ { 0, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 0, 0, 0, 1, 0, 1, 1, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0 } },
{ { 1, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 1, 1, 1, 0, 1, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0,
0, 0, 0, 0, 0, 0 } },
{ { 1, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 1, 1, 1, 0, 1, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 0, 0, 0, 0, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0 } },
{ { 1, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 1, 1, 0, 1, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 0, 0, 0, 1, 0, 1, 1, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0 } },
{ { 0, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 0, 0, 0, 1, 0, 1, 1, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0 } },
{ { 1, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 1, 1, 1, 0, 1, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0,
0, 0, 0, 0, 0, 0 } },
{ { 1, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 1, 1, 1, 0, 1, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 0, 0, 0, 1, 0, 1, 1, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0 } },
{ { 0, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 0, 0, 0, 1, 0, 1, 1, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0 } },
{ { 1, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 1, 1, 1, 0, 1, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0,
0, 0, 0, 0, 0, 0 } },
{ { 1, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 1, 1, 1, 0, 1, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 0, 0, 0, 0, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0 } },
{ { 1, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 1, 1, 0, 1, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 0, 0, 0, 1, 0, 1, 1, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0 } },
{ { 0, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 0, 0, 0, 1, 0, 1, 1, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0 } },
{ { 1, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 1, 1, 1, 0, 1, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0,
0, 0, 0, 0, 0, 0 } },
{ { 1, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 1, 1, 1, 0, 1, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 0, 0, 0, 0, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0 } },
{ { 1, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 1, 1, 0, 1, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 0, 0, 0, 1, 0, 1, 1, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0 } },
{ { 0, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 0, 0, 0, 1, 0, 1, 1, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0 } },
{ { 1, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 1, 1, 1, 0, 1, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0,
0, 0, 0, 0, 0, 0 } },
{ { 1, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 1, 1, 1, 0, 1, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 0, 0, 0, 0, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0 } },
{ { 1, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 1, 1, 0, 1, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 0, 0, 0, 1, 0, 1, 1, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0 } },
{ { 0, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 0, 0, 0, 1, 0, 1, 1, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0 } },
{ { 1, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 1, 1, 1, 0, 1, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0,
0, 0, 0, 0, 0, 0 } } } },
{ MN_adc, 0x10, 2, SPACE_BASE, None,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0,
0, 0, 0, 0, 0, 0 } },
{ { 1, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 1, 1, 1, 0, 1, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 0, 0, 0, 0, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0 } },
{ { 1, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 1, 1, 0, 1, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 0, 0, 0, 1, 0, 1, 1, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0 } },
{ { 0, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 0, 0, 0, 1, 0, 1, 1, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0 } },
{ { 1, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 1, 1, 1, 0, 1, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 1, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 1, 1, 1, 0, 1, 0,
0, 0, 0, 0, 1, 0 } } } },
{ MN_not, 0xf6, 1, SPACE_BASE, 2,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 1, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 1, 1, 1, 0, 1, 0,
0, 0, 0, 0, 1, 0 } } } },
{ MN_aaa, 0x37, 0, SPACE_BASE, None,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 1, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0 } },
{ { { 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0 } } } },
{ MN_aas, 0x3f, 0, SPACE_BASE, None,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 1, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0 } },
{ { { 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0 } } } },
{ MN_daa, 0x27, 0, SPACE_BASE, None,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 1, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0 } },
{ { { 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0 } } } },
{ MN_das, 0x2f, 0, SPACE_BASE, None,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 1, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0 } },
{ { { 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0 } } } },
{ MN_aad, 0xd50a, 0, SPACE_BASE, None,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 1, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0 } },
{ { { 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0 } } } },
{ MN_aad, 0xd5, 1, SPACE_BASE, None,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 1, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0 } },
{ { { 0, 0, 0, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0 } } } },
{ MN_aam, 0xd40a, 0, SPACE_BASE, None,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 1, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0 } },
{ { { 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0 } } } },
{ MN_aam, 0xd4, 1, SPACE_BASE, None,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 1, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0 } },
{ { { 0, 0, 0, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0 } } } },
{ MN_cbw, 0x98, 0, SPACE_BASE, None,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0 } } } },
{ MN_cwde, 0x98, 0, SPACE_BASE, None,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0 } } } },
{ MN_cdqe, 0x98, 0, SPACE_BASE, None,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 1, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0 } },
{ { { 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0 } } } },
{ MN_cwd, 0x99, 0, SPACE_BASE, None,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0 } } } },
{ MN_cdq, 0x99, 0, SPACE_BASE, None,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0 } } } },
{ MN_cqo, 0x99, 0, SPACE_BASE, None,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 1, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0 } },
{ { { 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0 } } } },
{ MN_cbtw, 0x98, 0, SPACE_BASE, None,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0 } } } },
{ MN_cwtl, 0x98, 0, SPACE_BASE, None,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0 } } } },
{ MN_cltq, 0x98, 0, SPACE_BASE, None,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 1, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0 } },
{ { { 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0 } } } },
{ MN_cwtd, 0x99, 0, SPACE_BASE, None,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0 } } } },
{ MN_cltd, 0x99, 0, SPACE_BASE, None,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0 } } } },
{ MN_cqto, 0x99, 0, SPACE_BASE, None,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 1, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0 } },
{ { { 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0 } } } },
{ MN_mul, 0xf6, 1, SPACE_BASE, 4,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 1, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 1, 1, 1, 0, 1, 0,
0, 0, 0, 0, 1, 0 } } } },
{ MN_imul, 0xf6, 1, SPACE_BASE, 5,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 1, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 1, 1, 1, 0, 1, 0,
0, 0, 0, 0, 1, 0 } } } },
{ MN_imul, 0xaf, 2, SPACE_0F, None,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 1, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 1, 1, 0, 1, 0,
0, 0, 0, 0, 1, 0 } },
{ { 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 0, 1, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 0, 0, 0, 0, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0 } },
{ { 1, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 1, 1, 0, 1, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 0, 0, 0, 0, 0, 1, 1, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0 } },
{ { 1, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 1, 1, 0, 1, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 0, 0, 0, 0, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0 } },
{ { 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 0, 1, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 0, 0, 0, 0, 0, 1, 1, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0 } },
{ { 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 0, 1, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 1, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 1, 1, 1, 0, 1, 0,
0, 0, 0, 0, 1, 0 } } } },
{ MN_div, 0xf6, 2, SPACE_BASE, 6,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 1, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 1, 1, 1, 0, 1, 0,
0, 0, 0, 0, 1, 0 } },
{ { 0, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 1, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 1, 1, 1, 0, 1, 0,
0, 0, 0, 0, 1, 0 } } } },
{ MN_idiv, 0xf6, 2, SPACE_BASE, 7,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 1, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 1, 1, 1, 0, 1, 0,
0, 0, 0, 0, 1, 0 } },
{ { 0, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 0, 0, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0 } },
{ { 1, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 1, 1, 1, 0, 1, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 0, 0, 0, 1, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0 } },
{ { 1, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 1, 1, 1, 0, 1, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 0, 2, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0 } },
{ { 1, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 1, 1, 1, 0, 1, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 1, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 1, 1, 1, 0, 1, 0,
0, 0, 0, 0, 1, 0 } } } },
{ MN_ror, 0xd0, 2, SPACE_BASE, 1,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 0, 0, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0 } },
{ { 1, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 1, 1, 1, 0, 1, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 0, 0, 0, 1, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0 } },
{ { 1, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 1, 1, 1, 0, 1, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 0, 2, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0 } },
{ { 1, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 1, 1, 1, 0, 1, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 1, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 1, 1, 1, 0, 1, 0,
0, 0, 0, 0, 1, 0 } } } },
{ MN_rcl, 0xd0, 2, SPACE_BASE, 2,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 0, 0, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0 } },
{ { 1, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 1, 1, 1, 0, 1, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 0, 0, 0, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0 } },
{ { 1, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 1, 1, 1, 0, 1, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 0, 2, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0 } },
{ { 1, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 1, 1, 1, 0, 1, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 1, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 1, 1, 1, 0, 1, 0,
0, 0, 0, 0, 1, 0 } } } },
{ MN_rcr, 0xd0, 2, SPACE_BASE, 3,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 0, 0, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0 } },
{ { 1, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 1, 1, 1, 0, 1, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 0, 0, 0, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0 } },
{ { 1, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 1, 1, 1, 0, 1, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 0, 2, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0 } },
{ { 1, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 1, 1, 1, 0, 1, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 1, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 1, 1, 1, 0, 1, 0,
0, 0, 0, 0, 1, 0 } } } },
{ MN_sal, 0xd0, 2, SPACE_BASE, 4,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 0, 0, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0 } },
{ { 1, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 1, 1, 1, 0, 1, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 0, 0, 0, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0 } },
{ { 1, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 1, 1, 1, 0, 1, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 0, 2, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0 } },
{ { 1, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 1, 1, 1, 0, 1, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 1, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 1, 1, 1, 0, 1, 0,
0, 0, 0, 0, 1, 0 } } } },
{ MN_shl, 0xd0, 2, SPACE_BASE, 4,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 0, 0, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0 } },
{ { 1, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 1, 1, 1, 0, 1, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 0, 0, 0, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0 } },
{ { 1, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 1, 1, 1, 0, 1, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 0, 2, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0 } },
{ { 1, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 1, 1, 1, 0, 1, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 1, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 1, 1, 1, 0, 1, 0,
0, 0, 0, 0, 1, 0 } } } },
{ MN_shr, 0xd0, 2, SPACE_BASE, 5,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 0, 0, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0 } },
{ { 1, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 1, 1, 1, 0, 1, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 0, 0, 0, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0 } },
{ { 1, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 1, 1, 1, 0, 1, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 0, 2, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0 } },
{ { 1, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 1, 1, 1, 0, 1, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 1, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 1, 1, 1, 0, 1, 0,
0, 0, 0, 0, 1, 0 } } } },
{ MN_sar, 0xd0, 2, SPACE_BASE, 7,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 0, 0, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0 } },
{ { 1, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 1, 1, 1, 0, 1, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 0, 0, 0, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0 } },
{ { 1, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 1, 1, 1, 0, 1, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 0, 2, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0 } },
{ { 1, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 1, 1, 1, 0, 1, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 1, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 1, 1, 1, 0, 1, 0,
0, 0, 0, 0, 1, 0 } } } },
{ MN_shld, 0xa4, 3, SPACE_0F, None,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 0, 0, 0, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0 } },
{ { 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 0, 1, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 0, 2, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0 } },
{ { 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 0, 1, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 0, 1, 0,
0, 0, 0, 0, 0, 0 } },
{ { 1, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 1, 1, 0, 1, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 0, 0, 0, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0 } },
{ { 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 0, 1, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 0, 2, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0 } },
{ { 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 0, 1, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 0, 1, 0,
0, 0, 0, 0, 0, 0 } },
{ { 1, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 1, 1, 0, 1, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 1, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0 } },
{ { { 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0 } } } },
{ MN_call, 0xe8, 1, SPACE_BASE, None,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 1, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0 } },
{ { { 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0 } } } },
{ MN_call, 0xe8, 1, SPACE_BASE, None,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 1, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0 } },
{ { { 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0 } } } },
{ MN_call, 0xff, 1, SPACE_BASE, 2,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 1, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0 } },
{ { { 1, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 1, 1, 0, 0, 0,
0, 0, 0, 0, 1, 0 } } } },
{ MN_call, 0xff, 1, SPACE_BASE, 2,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 1, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0 } },
{ { { 1, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 1, 0, 1, 0, 1, 0, 0, 1, 0,
0, 0, 0, 0, 1, 0 } } } },
{ MN_call, 0xff, 1, SPACE_BASE, 2,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 1, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0 } },
{ { { 1, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 1, 0, 1, 0, 0, 0, 0, 1, 0,
0, 0, 0, 0, 1, 0 } } } },
{ MN_call, 0x9a, 2, SPACE_BASE, None,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 1, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0 } },
{ { { 0, 0, 0, 0, 0, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0 } },
{ { 0, 0, 0, 0, 0, 1, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 1, 1, 0, 0,
0, 0, 0, 0, 0, 0 } } } },
{ MN_call, 0xff, 1, SPACE_BASE, 3,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 1, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0 } },
{ { { 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 1, 0, 1, 0, 0, 1, 1, 0, 1,
0, 0, 0, 0, 0, 0 } } } },
{ MN_lcall, 0x9a, 2, SPACE_BASE, None,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 1, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0 } },
{ { { 0, 0, 0, 0, 0, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0 } },
{ { 0, 0, 0, 0, 0, 1, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 1, 0 } } } },
{ MN_lcall, 0xff, 1, SPACE_BASE, 3,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 1, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0 } },
{ { { 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 1, 0, 1, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 1, 0 } } } },
{ MN_jmp, 0xeb, 1, SPACE_BASE, None,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0 } } } },
{ MN_jmp, 0xeb, 1, SPACE_BASE, None,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 1, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0 } },
{ { { 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 1, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0 } } } },
{ MN_jmp, 0xff, 1, SPACE_BASE, 4,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 1, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0 } },
{ { { 1, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 1, 1, 0, 0, 0,
0, 0, 0, 0, 1, 0 } } } },
{ MN_jmp, 0xff, 1, SPACE_BASE, 4,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 1, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0 } },
{ { { 1, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 1, 0, 1, 0, 1, 0, 0, 1, 0,
0, 0, 0, 0, 1, 0 } } } },
{ MN_jmp, 0xff, 1, SPACE_BASE, 4,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 1, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0 } },
{ { { 1, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 1, 0, 1, 0, 0, 0, 0, 1, 0,
0, 0, 0, 0, 1, 0 } } } },
{ MN_jmp, 0xea, 2, SPACE_BASE, None,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 1, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0 } },
{ { { 0, 0, 0, 0, 0, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0 } },
{ { 0, 0, 0, 0, 0, 1, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 1, 1, 0, 0,
0, 0, 0, 0, 0, 0 } } } },
{ MN_jmp, 0xff, 1, SPACE_BASE, 5,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 1, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0 } },
{ { { 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 1, 0, 1, 0, 0, 1, 1, 0, 1,
0, 0, 0, 0, 0, 0 } } } },
{ MN_ljmp, 0xea, 2, SPACE_BASE, None,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 1, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0 } },
{ { { 0, 0, 0, 0, 0, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0 } },
{ { 0, 0, 0, 0, 0, 1, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 1, 0 } } } },
{ MN_ljmp, 0xff, 1, SPACE_BASE, 5,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 1, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0 } },
{ { { 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 1, 0, 1, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 1, 0 } } } },
{ MN_ret, 0xc3, 0, SPACE_BASE, None,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 1, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0 } },
{ { { 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0 } } } },
{ MN_ret, 0xc2, 1, SPACE_BASE, None,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 1, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0 } },
{ { { 0, 0, 0, 0, 0, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0 } } } },
{ MN_ret, 0xc3, 0, SPACE_BASE, None,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 1, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0 } },
{ { { 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0 } } } },
{ MN_ret, 0xc2, 1, SPACE_BASE, None,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 1, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0 } },
{ { { 0, 0, 0, 0, 0, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0 } } } },
{ MN_ret, 0xc3, 0, SPACE_BASE, None,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 1, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0 } },
{ { { 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0 } } } },
{ MN_ret, 0xc2, 1, SPACE_BASE, None,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 1, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0 } },
{ { { 0, 0, 0, 0, 0, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0 } } } },
{ MN_lret, 0xcb, 0, SPACE_BASE, None,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0 } } } },
{ MN_lret, 0xca, 1, SPACE_BASE, None,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 0, 0, 0, 0, 0, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0 } } } },
{ MN_retf, 0xcb, 0, SPACE_BASE, None,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0 } } } },
{ MN_retf, 0xca, 1, SPACE_BASE, None,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 0, 0, 0, 0, 0, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0 } } } },
{ MN_enter, 0xc8, 2, SPACE_BASE, None,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 1, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0 } },
{ { { 0, 0, 0, 0, 0, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0 } },
{ { 0, 0, 0, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 1, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0 } },
{ { { 0, 0, 0, 0, 0, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0 } },
{ { 0, 0, 0, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 1, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0 } },
{ { { 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0 } } } },
{ MN_leave, 0xc9, 0, SPACE_BASE, None,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 1, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0 } },
{ { { 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0 } } } },
{ MN_jo, 0x70, 1, SPACE_BASE, None,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0 } } } },
{ MN_jno, 0x71, 1, SPACE_BASE, None,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0 } } } },
{ MN_jb, 0x72, 1, SPACE_BASE, None,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0 } } } },
{ MN_jc, 0x72, 1, SPACE_BASE, None,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0 } } } },
{ MN_jnae, 0x72, 1, SPACE_BASE, None,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0 } } } },
{ MN_jnb, 0x73, 1, SPACE_BASE, None,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0 } } } },
{ MN_jnc, 0x73, 1, SPACE_BASE, None,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0 } } } },
{ MN_jae, 0x73, 1, SPACE_BASE, None,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0 } } } },
{ MN_je, 0x74, 1, SPACE_BASE, None,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0 } } } },
{ MN_jz, 0x74, 1, SPACE_BASE, None,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0 } } } },
{ MN_jne, 0x75, 1, SPACE_BASE, None,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0 } } } },
{ MN_jnz, 0x75, 1, SPACE_BASE, None,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0 } } } },
{ MN_jbe, 0x76, 1, SPACE_BASE, None,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0 } } } },
{ MN_jna, 0x76, 1, SPACE_BASE, None,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0 } } } },
{ MN_jnbe, 0x77, 1, SPACE_BASE, None,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0 } } } },
{ MN_ja, 0x77, 1, SPACE_BASE, None,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0 } } } },
{ MN_js, 0x78, 1, SPACE_BASE, None,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0 } } } },
{ MN_jns, 0x79, 1, SPACE_BASE, None,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0 } } } },
{ MN_jp, 0x7a, 1, SPACE_BASE, None,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0 } } } },
{ MN_jpe, 0x7a, 1, SPACE_BASE, None,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0 } } } },
{ MN_jnp, 0x7b, 1, SPACE_BASE, None,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0 } } } },
{ MN_jpo, 0x7b, 1, SPACE_BASE, None,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0 } } } },
{ MN_jl, 0x7c, 1, SPACE_BASE, None,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0 } } } },
{ MN_jnge, 0x7c, 1, SPACE_BASE, None,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0 } } } },
{ MN_jnl, 0x7d, 1, SPACE_BASE, None,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0 } } } },
{ MN_jge, 0x7d, 1, SPACE_BASE, None,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0 } } } },
{ MN_jle, 0x7e, 1, SPACE_BASE, None,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0 } } } },
{ MN_jng, 0x7e, 1, SPACE_BASE, None,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0 } } } },
{ MN_jnle, 0x7f, 1, SPACE_BASE, None,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0 } } } },
{ MN_jg, 0x7f, 1, SPACE_BASE, None,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0 } } } },
{ MN_jcxz, 0xe3, 1, SPACE_BASE, None,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 1, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0 } },
{ { { 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0 } } } },
{ MN_jecxz, 0xe3, 1, SPACE_BASE, None,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0 } } } },
{ MN_jrcxz, 0xe3, 1, SPACE_BASE, None,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 1, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0 } },
{ { { 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0 } } } },
{ MN_loop, 0xe2, 1, SPACE_BASE, None,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 1, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0 } },
{ { { 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0 } } } },
{ MN_loop, 0xe2, 1, SPACE_BASE, None,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 1, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0 } },
{ { { 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0 } } } },
{ MN_loopz, 0xe1, 1, SPACE_BASE, None,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 1, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0 } },
{ { { 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0 } } } },
{ MN_loopz, 0xe1, 1, SPACE_BASE, None,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 1, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0 } },
{ { { 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0 } } } },
{ MN_loope, 0xe1, 1, SPACE_BASE, None,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 1, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0 } },
{ { { 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0 } } } },
{ MN_loope, 0xe1, 1, SPACE_BASE, None,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 1, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0 } },
{ { { 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0 } } } },
{ MN_loopnz, 0xe0, 1, SPACE_BASE, None,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 1, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0 } },
{ { { 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0 } } } },
{ MN_loopnz, 0xe0, 1, SPACE_BASE, None,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 1, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0 } },
{ { { 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0 } } } },
{ MN_loopne, 0xe0, 1, SPACE_BASE, None,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 1, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0 } },
{ { { 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0 } } } },
{ MN_loopne, 0xe0, 1, SPACE_BASE, None,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 1, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0 } },
{ { { 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0 } } } },
{ MN_seto, 0x90, 1, SPACE_0F, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 1, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 1, 0, 0, 0, 0, 0,
0, 0, 0, 0, 1, 0 } } } },
{ MN_setno, 0x91, 1, SPACE_0F, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 1, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 1, 0, 0, 0, 0, 0,
0, 0, 0, 0, 1, 0 } } } },
{ MN_setb, 0x92, 1, SPACE_0F, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 1, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 1, 0, 0, 0, 0, 0,
0, 0, 0, 0, 1, 0 } } } },
{ MN_setc, 0x92, 1, SPACE_0F, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 1, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 1, 0, 0, 0, 0, 0,
0, 0, 0, 0, 1, 0 } } } },
{ MN_setnae, 0x92, 1, SPACE_0F, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 1, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 1, 0, 0, 0, 0, 0,
0, 0, 0, 0, 1, 0 } } } },
{ MN_setnb, 0x93, 1, SPACE_0F, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 1, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 1, 0, 0, 0, 0, 0,
0, 0, 0, 0, 1, 0 } } } },
{ MN_setnc, 0x93, 1, SPACE_0F, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 1, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 1, 0, 0, 0, 0, 0,
0, 0, 0, 0, 1, 0 } } } },
{ MN_setae, 0x93, 1, SPACE_0F, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 1, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 1, 0, 0, 0, 0, 0,
0, 0, 0, 0, 1, 0 } } } },
{ MN_sete, 0x94, 1, SPACE_0F, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 1, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 1, 0, 0, 0, 0, 0,
0, 0, 0, 0, 1, 0 } } } },
{ MN_setz, 0x94, 1, SPACE_0F, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 1, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 1, 0, 0, 0, 0, 0,
0, 0, 0, 0, 1, 0 } } } },
{ MN_setne, 0x95, 1, SPACE_0F, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 1, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 1, 0, 0, 0, 0, 0,
0, 0, 0, 0, 1, 0 } } } },
{ MN_setnz, 0x95, 1, SPACE_0F, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 1, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 1, 0, 0, 0, 0, 0,
0, 0, 0, 0, 1, 0 } } } },
{ MN_setbe, 0x96, 1, SPACE_0F, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 1, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 1, 0, 0, 0, 0, 0,
0, 0, 0, 0, 1, 0 } } } },
{ MN_setna, 0x96, 1, SPACE_0F, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 1, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 1, 0, 0, 0, 0, 0,
0, 0, 0, 0, 1, 0 } } } },
{ MN_setnbe, 0x97, 1, SPACE_0F, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 1, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 1, 0, 0, 0, 0, 0,
0, 0, 0, 0, 1, 0 } } } },
{ MN_seta, 0x97, 1, SPACE_0F, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 1, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 1, 0, 0, 0, 0, 0,
0, 0, 0, 0, 1, 0 } } } },
{ MN_sets, 0x98, 1, SPACE_0F, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 1, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 1, 0, 0, 0, 0, 0,
0, 0, 0, 0, 1, 0 } } } },
{ MN_setns, 0x99, 1, SPACE_0F, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 1, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 1, 0, 0, 0, 0, 0,
0, 0, 0, 0, 1, 0 } } } },
{ MN_setp, 0x9a, 1, SPACE_0F, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 1, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 1, 0, 0, 0, 0, 0,
0, 0, 0, 0, 1, 0 } } } },
{ MN_setpe, 0x9a, 1, SPACE_0F, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 1, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 1, 0, 0, 0, 0, 0,
0, 0, 0, 0, 1, 0 } } } },
{ MN_setnp, 0x9b, 1, SPACE_0F, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 1, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 1, 0, 0, 0, 0, 0,
0, 0, 0, 0, 1, 0 } } } },
{ MN_setpo, 0x9b, 1, SPACE_0F, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 1, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 1, 0, 0, 0, 0, 0,
0, 0, 0, 0, 1, 0 } } } },
{ MN_setl, 0x9c, 1, SPACE_0F, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 1, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 1, 0, 0, 0, 0, 0,
0, 0, 0, 0, 1, 0 } } } },
{ MN_setnge, 0x9c, 1, SPACE_0F, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 1, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 1, 0, 0, 0, 0, 0,
0, 0, 0, 0, 1, 0 } } } },
{ MN_setnl, 0x9d, 1, SPACE_0F, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 1, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 1, 0, 0, 0, 0, 0,
0, 0, 0, 0, 1, 0 } } } },
{ MN_setge, 0x9d, 1, SPACE_0F, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 1, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 1, 0, 0, 0, 0, 0,
0, 0, 0, 0, 1, 0 } } } },
{ MN_setle, 0x9e, 1, SPACE_0F, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 1, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 1, 0, 0, 0, 0, 0,
0, 0, 0, 0, 1, 0 } } } },
{ MN_setng, 0x9e, 1, SPACE_0F, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 1, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 1, 0, 0, 0, 0, 0,
0, 0, 0, 0, 1, 0 } } } },
{ MN_setnle, 0x9f, 1, SPACE_0F, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 1, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 1, 0, 0, 0, 0, 0,
0, 0, 0, 0, 1, 0 } } } },
{ MN_setg, 0x9f, 1, SPACE_0F, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 1, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 1, 0, 0, 0, 0, 0,
0, 0, 0, 0, 1, 0 } } } },
{ MN_cmps, 0xa6, 0, SPACE_BASE, None,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0 } } } },
{ MN_cmps, 0xa6, 2, SPACE_BASE, None,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 1, 1, 1, 0, 1, 0,
0, 0, 0, 0, 1, 0 } },
{ { 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 1, 1, 1, 0, 1, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0 } } } },
{ MN_scmp, 0xa6, 2, SPACE_BASE, None,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 1, 1, 1, 0, 1, 0,
0, 0, 0, 0, 1, 0 } },
{ { 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 1, 1, 1, 0, 1, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0 } } } },
{ MN_ins, 0x6c, 2, SPACE_BASE, None,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 0, 3, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0 } },
{ { 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 1, 1, 1, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0 } } } },
{ MN_outs, 0x6e, 2, SPACE_BASE, None,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 1, 0, 0, 0,
0, 0, 0, 0, 1, 0 } },
{ { 0, 3, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0 } } } },
{ MN_lods, 0xac, 1, SPACE_BASE, None,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 1, 0, 1, 0,
0, 0, 0, 0, 1, 0 } } } },
{ MN_lods, 0xac, 2, SPACE_BASE, None,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 1, 0, 1, 0,
0, 0, 0, 0, 1, 0 } },
{ { 0, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0 } } } },
{ MN_slod, 0xac, 1, SPACE_BASE, None,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 1, 0, 1, 0,
0, 0, 0, 0, 1, 0 } } } },
{ MN_slod, 0xac, 2, SPACE_BASE, None,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 1, 0, 1, 0,
0, 0, 0, 0, 1, 0 } },
{ { 0, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0 } } } },
{ MN_movs, 0xa4, 2, SPACE_BASE, None,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 1, 1, 1, 0, 1, 0,
0, 0, 0, 0, 1, 0 } },
{ { 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 1, 1, 1, 0, 1, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0 } } } },
{ MN_smov, 0xa4, 2, SPACE_BASE, None,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 1, 1, 1, 0, 1, 0,
0, 0, 0, 0, 1, 0 } },
{ { 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 1, 1, 1, 0, 1, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0 } } } },
{ MN_scas, 0xae, 1, SPACE_BASE, None,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 1, 1, 1, 0, 1, 0,
0, 0, 0, 0, 1, 0 } } } },
{ MN_scas, 0xae, 2, SPACE_BASE, None,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 1, 1, 1, 0, 1, 0,
0, 0, 0, 0, 1, 0 } },
{ { 0, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0 } } } },
{ MN_ssca, 0xae, 1, SPACE_BASE, None,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 1, 1, 1, 0, 1, 0,
0, 0, 0, 0, 1, 0 } } } },
{ MN_ssca, 0xae, 2, SPACE_BASE, None,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 1, 1, 1, 0, 1, 0,
0, 0, 0, 0, 1, 0 } },
{ { 0, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0 } } } },
{ MN_stos, 0xaa, 1, SPACE_BASE, None,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 1, 1, 1, 0, 1, 0,
0, 0, 0, 0, 1, 0 } } } },
{ MN_stos, 0xaa, 2, SPACE_BASE, None,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 0, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0,
0, 0, 0, 0, 0, 0 } },
{ { 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 1, 1, 1, 0, 1, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0 } } } },
{ MN_ssto, 0xaa, 1, SPACE_BASE, None,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 1, 1, 1, 0, 1, 0,
0, 0, 0, 0, 1, 0 } } } },
{ MN_ssto, 0xaa, 2, SPACE_BASE, None,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 0, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0,
0, 0, 0, 0, 0, 0 } },
{ { 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 1, 1, 1, 0, 1, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0 } } } },
{ MN_xlat, 0xd7, 1, SPACE_BASE, None,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 0, 0, 0, 0, 0,
0, 0, 0, 0, 1, 0 } } } },
{ MN_bsf, 0xbc, 2, SPACE_0F, None,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 1, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 1, 1, 0, 1, 0,
0, 0, 0, 0, 1, 0 } },
{ { 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 0, 1, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 1, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 1, 1, 0, 1, 0,
0, 0, 0, 0, 1, 0 } },
{ { 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 0, 1, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 0, 1, 0,
0, 0, 0, 0, 0, 0 } },
{ { 1, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 1, 1, 0, 1, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 0, 0, 0, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0 } },
{ { 1, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 1, 1, 0, 1, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 0, 1, 0,
0, 0, 0, 0, 0, 0 } },
{ { 1, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 1, 1, 0, 1, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 0, 0, 0, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0 } },
{ { 1, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 1, 1, 0, 1, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 0, 1, 0,
0, 0, 0, 0, 0, 0 } },
{ { 1, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 1, 1, 0, 1, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 0, 0, 0, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0 } },
{ { 1, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 1, 1, 0, 1, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 0, 1, 0,
0, 0, 0, 0, 0, 0 } },
{ { 1, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 1, 1, 0, 1, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 0, 0, 0, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0 } },
{ { 1, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 1, 1, 0, 1, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 0, 0, 0, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0 } } } },
{ MN_int1, 0xf1, 0, SPACE_BASE, None,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0 } } } },
{ MN_int3, 0xcc, 0, SPACE_BASE, None,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0 } } } },
{ MN_into, 0xce, 0, SPACE_BASE, None,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 1, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0 } },
{ { { 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0 } } } },
{ MN_iret, 0xcf, 0, SPACE_BASE, None,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0 } } } },
{ MN_rsm, 0xaa, 0, SPACE_0F, None,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0 } } } },
{ MN_bound, 0x62, 2, SPACE_BASE, None,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 1, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0 } },
{ { { 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 0, 0, 0,
0, 0, 0, 0, 0, 0 } },
{ { 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 1, 0, 1, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0 } } } },
{ MN_nop, 0x1f, 1, SPACE_0F, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 1, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 1, 1, 0, 1, 0,
0, 0, 0, 0, 1, 0 } } } },
{ MN_nop, 0x90, 0, SPACE_BASE, None,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0 } } } },
{ MN_arpl, 0x63, 2, SPACE_BASE, None,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 1, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0 } },
{ { { 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 0, 0, 0,
0, 0, 0, 0, 0, 0 } },
{ { 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 1, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0 } },
{ { { 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 0, 0, 0,
0, 0, 0, 0, 0, 0 } },
{ { 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 1, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 0, 1, 0,
0, 0, 0, 0, 0, 0 } },
{ { 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 0, 1, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 1, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 1, 0, 0, 0, 0,
0, 0, 0, 0, 1, 0 } },
{ { 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 0, 1, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 1, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0 } },
{ { { 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 1, 0, 0,
0, 0, 0, 0, 1, 0 } } } },
{ MN_lgdt, 0x01, 1, SPACE_0F, 2,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 1, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0 } },
{ { { 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 1, 0, 1, 0, 0, 0, 0, 0, 1,
0, 0, 0, 0, 1, 0 } } } },
{ MN_lidt, 0x01, 1, SPACE_0F, 3,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 1, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0 } },
{ { { 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 1, 0, 0,
0, 0, 0, 0, 1, 0 } } } },
{ MN_lidt, 0x01, 1, SPACE_0F, 3,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 1, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0 } },
{ { { 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 1, 0, 1, 0, 0, 0, 0, 0, 1,
0, 0, 0, 0, 1, 0 } } } },
{ MN_lldt, 0x00, 1, SPACE_0F, 2,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 0, 1, 0,
0, 0, 0, 0, 0, 0 } } } },
{ MN_lldt, 0x00, 1, SPACE_0F, 2,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 1, 0, 0, 0, 0,
0, 0, 0, 0, 1, 0 } } } },
{ MN_lmsw, 0x01, 1, SPACE_0F, 6,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 1, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 1, 0, 0, 0, 0,
0, 0, 0, 0, 1, 0 } } } },
{ MN_lsl, 0x03, 2, SPACE_0F, None,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 0, 1, 0,
0, 0, 0, 0, 0, 0 } },
{ { 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 0, 1, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 1, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 1, 0, 0, 0, 0,
0, 0, 0, 0, 1, 0 } },
{ { 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 0, 1, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 0, 1, 0,
0, 0, 0, 0, 0, 0 } } } },
{ MN_ltr, 0x00, 1, SPACE_0F, 3,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 1, 0, 0, 0, 0,
0, 0, 0, 0, 1, 0 } } } },
{ MN_sgdt, 0x01, 1, SPACE_0F, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 1, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0 } },
{ { { 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 1, 0, 0,
0, 0, 0, 0, 1, 0 } } } },
{ MN_sgdt, 0x01, 1, SPACE_0F, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 1, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0 } },
{ { { 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 1, 0, 1, 0, 0, 0, 0, 0, 1,
0, 0, 0, 0, 1, 0 } } } },
{ MN_sidt, 0x01, 1, SPACE_0F, 1,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 1, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0 } },
{ { { 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 1, 0, 0,
0, 0, 0, 0, 1, 0 } } } },
{ MN_sidt, 0x01, 1, SPACE_0F, 1,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 1, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0 } },
{ { { 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 1, 0, 1, 0, 0, 0, 0, 0, 1,
0, 0, 0, 0, 1, 0 } } } },
{ MN_sldt, 0x00, 1, SPACE_0F, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 0, 1, 0,
0, 0, 0, 0, 0, 0 } } } },
{ MN_sldt, 0x00, 1, SPACE_0F, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 1, 0, 0, 0, 0,
0, 0, 0, 0, 1, 0 } } } },
{ MN_smsw, 0x01, 1, SPACE_0F, 4,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 0, 1, 0,
0, 0, 0, 0, 0, 0 } } } },
{ MN_smsw, 0x01, 1, SPACE_0F, 4,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 1, 0, 0, 0, 0,
0, 0, 0, 0, 1, 0 } } } },
{ MN_str, 0x00, 1, SPACE_0F, 1,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 0, 1, 0,
0, 0, 0, 0, 0, 0 } } } },
{ MN_str, 0x00, 1, SPACE_0F, 1,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 1, 0, 0, 0, 0,
0, 0, 0, 0, 1, 0 } } } },
{ MN_verr, 0x00, 1, SPACE_0F, 4,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 0, 1, 0,
0, 0, 0, 0, 0, 0 } } } },
{ MN_verr, 0x00, 1, SPACE_0F, 4,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 1, 0, 0, 0, 0,
0, 0, 0, 0, 1, 0 } } } },
{ MN_verw, 0x00, 1, SPACE_0F, 5,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 0, 1, 0,
0, 0, 0, 0, 0, 0 } } } },
{ MN_verw, 0x00, 1, SPACE_0F, 5,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 1, 0, 0, 0, 0,
0, 0, 0, 0, 1, 0 } } } },
{ MN_fld, 0xd9, 1, SPACE_BASE, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1,
0, 0, 0, 0, 0, 0 } } } },
{ MN_fld, 0xd9, 1, SPACE_BASE, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 1, 0, 1, 0,
0, 0, 0, 0, 1, 0 } } } },
{ MN_fld, 0xd9, 1, SPACE_BASE, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1,
0, 0, 0, 0, 0, 0 } } } },
{ MN_fld, 0xdb, 1, SPACE_BASE, 5,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 1,
0, 0, 0, 0, 1, 0 } } } },
{ MN_fild, 0xdf, 1, SPACE_BASE, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 1, 1, 0, 0, 0,
0, 0, 0, 0, 1, 0 } } } },
{ MN_fild, 0xdf, 1, SPACE_BASE, 5,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 1, 0,
0, 0, 0, 0, 1, 0 } } } },
{ MN_fildll, 0xdf, 1, SPACE_BASE, 5,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 1, 0 } } } },
{ MN_fldt, 0xdb, 1, SPACE_BASE, 5,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 1, 0 } } } },
{ MN_fbld, 0xdf, 1, SPACE_BASE, 4,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 1,
0, 0, 0, 0, 1, 0 } } } },
{ MN_fst, 0xdd, 1, SPACE_BASE, 2,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1,
0, 0, 0, 0, 0, 0 } } } },
{ MN_fst, 0xd9, 1, SPACE_BASE, 2,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 1, 0, 1, 0,
0, 0, 0, 0, 1, 0 } } } },
{ MN_fst, 0xdd, 1, SPACE_BASE, 2,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1,
0, 0, 0, 0, 0, 0 } } } },
{ MN_fist, 0xdf, 1, SPACE_BASE, 2,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 1, 1, 0, 0, 0,
0, 0, 0, 0, 1, 0 } } } },
{ MN_fstp, 0xdd, 1, SPACE_BASE, 3,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1,
0, 0, 0, 0, 0, 0 } } } },
{ MN_fstp, 0xd9, 1, SPACE_BASE, 3,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 1, 0, 1, 0,
0, 0, 0, 0, 1, 0 } } } },
{ MN_fstp, 0xdd, 1, SPACE_BASE, 3,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1,
0, 0, 0, 0, 0, 0 } } } },
{ MN_fstp, 0xdb, 1, SPACE_BASE, 7,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 1,
0, 0, 0, 0, 1, 0 } } } },
{ MN_fistp, 0xdf, 1, SPACE_BASE, 3,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 1, 1, 0, 0, 0,
0, 0, 0, 0, 1, 0 } } } },
{ MN_fistp, 0xdf, 1, SPACE_BASE, 7,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 1, 0,
0, 0, 0, 0, 1, 0 } } } },
{ MN_fistpll, 0xdf, 1, SPACE_BASE, 7,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 1, 0 } } } },
{ MN_fstpt, 0xdb, 1, SPACE_BASE, 7,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 1, 0 } } } },
{ MN_fbstp, 0xdf, 1, SPACE_BASE, 6,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 1,
0, 0, 0, 0, 1, 0 } } } },
{ MN_fxch, 0xd9, 1, SPACE_BASE, 1,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1,
0, 0, 0, 0, 0, 0 } } } },
{ MN_fxch, 0xd9c9, 0, SPACE_BASE, None,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0 } } } },
{ MN_fcom, 0xd8, 1, SPACE_BASE, 2,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1,
0, 0, 0, 0, 0, 0 } } } },
{ MN_fcom, 0xd8d1, 0, SPACE_BASE, None,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0 } } } },
{ MN_fcom, 0xd8, 1, SPACE_BASE, 2,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 1, 0, 1, 0,
0, 0, 0, 0, 1, 0 } } } },
{ MN_fcom, 0xd8, 1, SPACE_BASE, 2,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1,
0, 0, 0, 0, 0, 0 } } } },
{ MN_ficom, 0xde, 1, SPACE_BASE, 2,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 1, 1, 0, 0, 0,
0, 0, 0, 0, 1, 0 } } } },
{ MN_fcomp, 0xd8, 1, SPACE_BASE, 3,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1,
0, 0, 0, 0, 0, 0 } } } },
{ MN_fcomp, 0xd8d9, 0, SPACE_BASE, None,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0 } } } },
{ MN_fcomp, 0xd8, 1, SPACE_BASE, 3,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 1, 0, 1, 0,
0, 0, 0, 0, 1, 0 } } } },
{ MN_fcomp, 0xd8, 1, SPACE_BASE, 3,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1,
0, 0, 0, 0, 0, 0 } } } },
{ MN_ficomp, 0xde, 1, SPACE_BASE, 3,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 1, 1, 0, 0, 0,
0, 0, 0, 0, 1, 0 } } } },
{ MN_fcompp, 0xded9, 0, SPACE_BASE, None,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0 } } } },
{ MN_fucom, 0xdd, 1, SPACE_BASE, 4,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1,
0, 0, 0, 0, 0, 0 } } } },
{ MN_fucom, 0xdde1, 0, SPACE_BASE, None,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0 } } } },
{ MN_fucomp, 0xdd, 1, SPACE_BASE, 5,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1,
0, 0, 0, 0, 0, 0 } } } },
{ MN_fucomp, 0xdde9, 0, SPACE_BASE, None,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0 } } } },
{ MN_fucompp, 0xdae9, 0, SPACE_BASE, None,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0 } } } },
{ MN_ftst, 0xd9e4, 0, SPACE_BASE, None,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0 } } } },
{ MN_fxam, 0xd9e5, 0, SPACE_BASE, None,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0 } } } },
{ MN_fld1, 0xd9e8, 0, SPACE_BASE, None,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0 } } } },
{ MN_fldl2t, 0xd9e9, 0, SPACE_BASE, None,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0 } } } },
{ MN_fldl2e, 0xd9ea, 0, SPACE_BASE, None,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0 } } } },
{ MN_fldpi, 0xd9eb, 0, SPACE_BASE, None,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0 } } } },
{ MN_fldlg2, 0xd9ec, 0, SPACE_BASE, None,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0 } } } },
{ MN_fldln2, 0xd9ed, 0, SPACE_BASE, None,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0 } } } },
{ MN_fldz, 0xd9ee, 0, SPACE_BASE, None,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0 } } } },
{ MN_fadd, 0xd8, 2, SPACE_BASE, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1,
0, 0, 0, 0, 0, 0 } },
{ { 0, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1,
0, 0, 0, 0, 0, 0 } } } },
{ MN_fadd, 0xdec1, 0, SPACE_BASE, None,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0 } } } },
{ MN_fadd, 0xd8, 1, SPACE_BASE, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 1, 0, 1, 0,
0, 0, 0, 0, 1, 0 } } } },
{ MN_fiadd, 0xde, 1, SPACE_BASE, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 1, 1, 0, 0, 0,
0, 0, 0, 0, 1, 0 } } } },
{ MN_faddp, 0xde, 2, SPACE_BASE, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 0, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1,
0, 0, 0, 0, 0, 0 } },
{ { 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1,
0, 0, 0, 0, 0, 0 } } } },
{ MN_faddp, 0xdec1, 0, SPACE_BASE, None,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0 } } } },
{ MN_fsub, 0xd8, 1, SPACE_BASE, 4,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1,
0, 0, 0, 0, 0, 0 } } } },
{ MN_fsub, 0xd8, 2, SPACE_BASE, 4,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1,
0, 0, 0, 0, 0, 0 } },
{ { 0, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0 } } } },
{ MN_fsub, 0xdee9, 0, SPACE_BASE, None,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0 } } } },
{ MN_fsub, 0xd8, 1, SPACE_BASE, 4,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 1, 0, 1, 0,
0, 0, 0, 0, 1, 0 } } } },
{ MN_fisub, 0xde, 1, SPACE_BASE, 4,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 1, 1, 0, 0, 0,
0, 0, 0, 0, 1, 0 } } } },
{ MN_fsubp, 0xde, 2, SPACE_BASE, 4,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 0, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1,
0, 0, 0, 0, 0, 0 } },
{ { 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1,
0, 0, 0, 0, 0, 0 } } } },
{ MN_fsubp, 0xdee1, 0, SPACE_BASE, None,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0 } } } },
{ MN_fsubp, 0xde, 2, SPACE_BASE, 5,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 0, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1,
0, 0, 0, 0, 0, 0 } },
{ { 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1,
0, 0, 0, 0, 0, 0 } } } },
{ MN_fsubp, 0xdee9, 0, SPACE_BASE, None,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0 } } } },
{ MN_fsubr, 0xd8, 1, SPACE_BASE, 5,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1,
0, 0, 0, 0, 0, 0 } } } },
{ MN_fsubr, 0xd8, 2, SPACE_BASE, 5,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1,
0, 0, 0, 0, 0, 0 } },
{ { 0, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0 } } } },
{ MN_fsubr, 0xdee1, 0, SPACE_BASE, None,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0 } } } },
{ MN_fsubr, 0xd8, 1, SPACE_BASE, 5,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 1, 0, 1, 0,
0, 0, 0, 0, 1, 0 } } } },
{ MN_fisubr, 0xde, 1, SPACE_BASE, 5,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 1, 1, 0, 0, 0,
0, 0, 0, 0, 1, 0 } } } },
{ MN_fsubrp, 0xde, 2, SPACE_BASE, 5,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 0, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1,
0, 0, 0, 0, 0, 0 } },
{ { 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1,
0, 0, 0, 0, 0, 0 } } } },
{ MN_fsubrp, 0xdee9, 0, SPACE_BASE, None,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0 } } } },
{ MN_fsubrp, 0xde, 2, SPACE_BASE, 4,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 0, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1,
0, 0, 0, 0, 0, 0 } },
{ { 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1,
0, 0, 0, 0, 0, 0 } } } },
{ MN_fsubrp, 0xdee1, 0, SPACE_BASE, None,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0 } } } },
{ MN_fmul, 0xd8, 2, SPACE_BASE, 1,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1,
0, 0, 0, 0, 0, 0 } },
{ { 0, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1,
0, 0, 0, 0, 0, 0 } } } },
{ MN_fmul, 0xdec9, 0, SPACE_BASE, None,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0 } } } },
{ MN_fmul, 0xd8, 1, SPACE_BASE, 1,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 1, 0, 1, 0,
0, 0, 0, 0, 1, 0 } } } },
{ MN_fimul, 0xde, 1, SPACE_BASE, 1,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 1, 1, 0, 0, 0,
0, 0, 0, 0, 1, 0 } } } },
{ MN_fmulp, 0xde, 2, SPACE_BASE, 1,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 0, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1,
0, 0, 0, 0, 0, 0 } },
{ { 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1,
0, 0, 0, 0, 0, 0 } } } },
{ MN_fmulp, 0xdec9, 0, SPACE_BASE, None,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0 } } } },
{ MN_fdiv, 0xd8, 1, SPACE_BASE, 6,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1,
0, 0, 0, 0, 0, 0 } } } },
{ MN_fdiv, 0xd8, 2, SPACE_BASE, 6,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1,
0, 0, 0, 0, 0, 0 } },
{ { 0, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0 } } } },
{ MN_fdiv, 0xdef9, 0, SPACE_BASE, None,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0 } } } },
{ MN_fdiv, 0xd8, 1, SPACE_BASE, 6,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 1, 0, 1, 0,
0, 0, 0, 0, 1, 0 } } } },
{ MN_fidiv, 0xde, 1, SPACE_BASE, 6,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 1, 1, 0, 0, 0,
0, 0, 0, 0, 1, 0 } } } },
{ MN_fdivp, 0xde, 2, SPACE_BASE, 6,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 0, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1,
0, 0, 0, 0, 0, 0 } },
{ { 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1,
0, 0, 0, 0, 0, 0 } } } },
{ MN_fdivp, 0xdef1, 0, SPACE_BASE, None,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0 } } } },
{ MN_fdivp, 0xde, 2, SPACE_BASE, 7,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 0, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1,
0, 0, 0, 0, 0, 0 } },
{ { 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1,
0, 0, 0, 0, 0, 0 } } } },
{ MN_fdivp, 0xdef9, 0, SPACE_BASE, None,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0 } } } },
{ MN_fdivr, 0xd8, 1, SPACE_BASE, 7,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1,
0, 0, 0, 0, 0, 0 } } } },
{ MN_fdivr, 0xd8, 2, SPACE_BASE, 7,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1,
0, 0, 0, 0, 0, 0 } },
{ { 0, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0 } } } },
{ MN_fdivr, 0xdef1, 0, SPACE_BASE, None,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0 } } } },
{ MN_fdivr, 0xd8, 1, SPACE_BASE, 7,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 1, 0, 1, 0,
0, 0, 0, 0, 1, 0 } } } },
{ MN_fidivr, 0xde, 1, SPACE_BASE, 7,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 1, 1, 0, 0, 0,
0, 0, 0, 0, 1, 0 } } } },
{ MN_fdivrp, 0xde, 2, SPACE_BASE, 7,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 0, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1,
0, 0, 0, 0, 0, 0 } },
{ { 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1,
0, 0, 0, 0, 0, 0 } } } },
{ MN_fdivrp, 0xdef9, 0, SPACE_BASE, None,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0 } } } },
{ MN_fdivrp, 0xde, 2, SPACE_BASE, 6,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 0, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1,
0, 0, 0, 0, 0, 0 } },
{ { 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1,
0, 0, 0, 0, 0, 0 } } } },
{ MN_fdivrp, 0xdef1, 0, SPACE_BASE, None,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0 } } } },
{ MN_f2xm1, 0xd9f0, 0, SPACE_BASE, None,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0 } } } },
{ MN_fyl2x, 0xd9f1, 0, SPACE_BASE, None,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0 } } } },
{ MN_fptan, 0xd9f2, 0, SPACE_BASE, None,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0 } } } },
{ MN_fpatan, 0xd9f3, 0, SPACE_BASE, None,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0 } } } },
{ MN_fxtract, 0xd9f4, 0, SPACE_BASE, None,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0 } } } },
{ MN_fprem1, 0xd9f5, 0, SPACE_BASE, None,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0 } } } },
{ MN_fdecstp, 0xd9f6, 0, SPACE_BASE, None,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0 } } } },
{ MN_fincstp, 0xd9f7, 0, SPACE_BASE, None,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0 } } } },
{ MN_fprem, 0xd9f8, 0, SPACE_BASE, None,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0 } } } },
{ MN_fyl2xp1, 0xd9f9, 0, SPACE_BASE, None,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0 } } } },
{ MN_fsqrt, 0xd9fa, 0, SPACE_BASE, None,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0 } } } },
{ MN_fsincos, 0xd9fb, 0, SPACE_BASE, None,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0 } } } },
{ MN_frndint, 0xd9fc, 0, SPACE_BASE, None,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0 } } } },
{ MN_fscale, 0xd9fd, 0, SPACE_BASE, None,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0 } } } },
{ MN_fsin, 0xd9fe, 0, SPACE_BASE, None,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0 } } } },
{ MN_fcos, 0xd9ff, 0, SPACE_BASE, None,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0 } } } },
{ MN_fchs, 0xd9e0, 0, SPACE_BASE, None,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0 } } } },
{ MN_fabs, 0xd9e1, 0, SPACE_BASE, None,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0 } } } },
{ MN_fninit, 0xdbe3, 0, SPACE_BASE, None,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0 } } } },
{ MN_finit, 0xdbe3, 0, SPACE_BASE, None,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0 } } } },
{ MN_fldcw, 0xd9, 1, SPACE_BASE, 5,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 1, 0, 0, 0, 0,
0, 0, 0, 0, 1, 0 } } } },
{ MN_fnstcw, 0xd9, 1, SPACE_BASE, 7,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 1, 0, 0, 0, 0,
0, 0, 0, 0, 1, 0 } } } },
{ MN_fstcw, 0xd9, 1, SPACE_BASE, 7,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 1, 0, 0, 0, 0,
0, 0, 0, 0, 1, 0 } } } },
{ MN_fnstsw, 0xdfe0, 1, SPACE_BASE, None,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 0, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0 } } } },
{ MN_fnstsw, 0xdd, 1, SPACE_BASE, 7,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 1, 0, 0, 0, 0,
0, 0, 0, 0, 1, 0 } } } },
{ MN_fnstsw, 0xdfe0, 0, SPACE_BASE, None,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0 } } } },
{ MN_fstsw, 0xdfe0, 1, SPACE_BASE, None,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 0, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0 } } } },
{ MN_fstsw, 0xdd, 1, SPACE_BASE, 7,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 1, 0, 0, 0, 0,
0, 0, 0, 0, 1, 0 } } } },
{ MN_fstsw, 0xdfe0, 0, SPACE_BASE, None,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0 } } } },
{ MN_fnclex, 0xdbe2, 0, SPACE_BASE, None,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0 } } } },
{ MN_fclex, 0xdbe2, 0, SPACE_BASE, None,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0 } } } },
{ MN_fnstenv, 0xd9, 1, SPACE_BASE, 6,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 1, 0 } } } },
{ MN_fstenv, 0xd9, 1, SPACE_BASE, 6,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 1, 0 } } } },
{ MN_fldenv, 0xd9, 1, SPACE_BASE, 4,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 1, 0 } } } },
{ MN_fnsave, 0xdd, 1, SPACE_BASE, 6,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 1, 0 } } } },
{ MN_fsave, 0xdd, 1, SPACE_BASE, 6,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 1, 0 } } } },
{ MN_frstor, 0xdd, 1, SPACE_BASE, 4,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 1, 0 } } } },
{ MN_fneni, 0xdbe0, 0, SPACE_BASE, None,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0 } } } },
{ MN_feni, 0xdbe0, 0, SPACE_BASE, None,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0 } } } },
{ MN_fndisi, 0xdbe1, 0, SPACE_BASE, None,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0 } } } },
{ MN_fdisi, 0xdbe1, 0, SPACE_BASE, None,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0 } } } },
{ MN_fnsetpm, 0xdbe4, 0, SPACE_BASE, None,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0 } } } },
{ MN_fsetpm, 0xdbe4, 0, SPACE_BASE, None,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0 } } } },
{ MN_frstpm, 0xdbe5, 0, SPACE_BASE, None,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0 } } } },
{ MN_ffree, 0xdd, 1, SPACE_BASE, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1,
0, 0, 0, 0, 0, 0 } } } },
{ MN_ffreep, 0xdf, 1, SPACE_BASE, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1,
0, 0, 0, 0, 0, 0 } } } },
{ MN_fnop, 0xd9d0, 0, SPACE_BASE, None,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0 } } } },
{ MN_fwait, 0x9b, 0, SPACE_BASE, None,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0 } } } },
{ MN_addr16, 0x67, 0, SPACE_BASE, None,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 1, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0 } },
{ { { 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0 } } } },
{ MN_addr32, 0x67, 0, SPACE_BASE, None,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0 } } } },
{ MN_aword, 0x67, 0, SPACE_BASE, None,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 1, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0 } },
{ { { 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0 } } } },
{ MN_adword, 0x67, 0, SPACE_BASE, None,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0 } } } },
{ MN_data16, 0x66, 0, SPACE_BASE, None,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0 } } } },
{ MN_data32, 0x66, 0, SPACE_BASE, None,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 1, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0 } },
{ { { 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0 } } } },
{ MN_word, 0x66, 0, SPACE_BASE, None,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0 } } } },
{ MN_dword, 0x66, 0, SPACE_BASE, None,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 1, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0 } },
{ { { 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0 } } } },
{ MN_lock, 0xf0, 0, SPACE_BASE, None,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0 } } } },
{ MN_wait, 0x9b, 0, SPACE_BASE, None,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0 } } } },
{ MN_cs, 0x2e, 0, SPACE_BASE, None,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0 } } } },
{ MN_ds, 0x3e, 0, SPACE_BASE, None,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0 } } } },
{ MN_es, 0x26, 0, SPACE_BASE, None,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 1, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0 } },
{ { { 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0 } } } },
{ MN_fs, 0x64, 0, SPACE_BASE, None,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0 } } } },
{ MN_gs, 0x65, 0, SPACE_BASE, None,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0 } } } },
{ MN_ss, 0x36, 0, SPACE_BASE, None,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 1, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0 } },
{ { { 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0 } } } },
{ MN_rep, 0xf3, 0, SPACE_BASE, None,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0 } } } },
{ MN_repe, 0xf3, 0, SPACE_BASE, None,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0 } } } },
{ MN_repz, 0xf3, 0, SPACE_BASE, None,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0 } } } },
{ MN_repne, 0xf2, 0, SPACE_BASE, None,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0 } } } },
{ MN_repnz, 0xf2, 0, SPACE_BASE, None,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0 } } } },
{ MN_ht, 0x3e, 0, SPACE_BASE, None,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0 } } } },
{ MN_hnt, 0x2e, 0, SPACE_BASE, None,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0 } } } },
{ MN_rex, 0x40, 0, SPACE_BASE, None,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 1, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0 } },
{ { { 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0 } } } },
{ MN_rexz, 0x41, 0, SPACE_BASE, None,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 1, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0 } },
{ { { 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0 } } } },
{ MN_rexy, 0x42, 0, SPACE_BASE, None,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 1, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0 } },
{ { { 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0 } } } },
{ MN_rexyz, 0x43, 0, SPACE_BASE, None,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 1, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0 } },
{ { { 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0 } } } },
{ MN_rexx, 0x44, 0, SPACE_BASE, None,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 1, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0 } },
{ { { 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0 } } } },
{ MN_rexxz, 0x45, 0, SPACE_BASE, None,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 1, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0 } },
{ { { 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0 } } } },
{ MN_rexxy, 0x46, 0, SPACE_BASE, None,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 1, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0 } },
{ { { 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0 } } } },
{ MN_rexxyz, 0x47, 0, SPACE_BASE, None,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 1, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0 } },
{ { { 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0 } } } },
{ MN_rex64, 0x48, 0, SPACE_BASE, None,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 1, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0 } },
{ { { 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0 } } } },
{ MN_rex64z, 0x49, 0, SPACE_BASE, None,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 1, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0 } },
{ { { 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0 } } } },
{ MN_rex64y, 0x4a, 0, SPACE_BASE, None,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 1, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0 } },
{ { { 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0 } } } },
{ MN_rex64yz, 0x4b, 0, SPACE_BASE, None,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 1, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0 } },
{ { { 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0 } } } },
{ MN_rex64x, 0x4c, 0, SPACE_BASE, None,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 1, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0 } },
{ { { 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0 } } } },
{ MN_rex64xz, 0x4d, 0, SPACE_BASE, None,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 1, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0 } },
{ { { 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0 } } } },
{ MN_rex64xy, 0x4e, 0, SPACE_BASE, None,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 1, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0 } },
{ { { 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0 } } } },
{ MN_rex64xyz, 0x4f, 0, SPACE_BASE, None,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 1, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0 } },
{ { { 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0 } } } },
{ MN_rex_b, 0x41, 0, SPACE_BASE, None,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 1, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0 } },
{ { { 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0 } } } },
{ MN_rex_x, 0x42, 0, SPACE_BASE, None,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 1, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0 } },
{ { { 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0 } } } },
{ MN_rex_xb, 0x43, 0, SPACE_BASE, None,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 1, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0 } },
{ { { 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0 } } } },
{ MN_rex_r, 0x44, 0, SPACE_BASE, None,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 1, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0 } },
{ { { 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0 } } } },
{ MN_rex_rb, 0x45, 0, SPACE_BASE, None,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 1, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0 } },
{ { { 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0 } } } },
{ MN_rex_rx, 0x46, 0, SPACE_BASE, None,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 1, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0 } },
{ { { 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0 } } } },
{ MN_rex_rxb, 0x47, 0, SPACE_BASE, None,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 1, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0 } },
{ { { 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0 } } } },
{ MN_rex_w, 0x48, 0, SPACE_BASE, None,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 1, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0 } },
{ { { 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0 } } } },
{ MN_rex_wb, 0x49, 0, SPACE_BASE, None,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 1, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0 } },
{ { { 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0 } } } },
{ MN_rex_wx, 0x4a, 0, SPACE_BASE, None,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 1, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0 } },
{ { { 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0 } } } },
{ MN_rex_wxb, 0x4b, 0, SPACE_BASE, None,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 1, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0 } },
{ { { 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0 } } } },
{ MN_rex_wr, 0x4c, 0, SPACE_BASE, None,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 1, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0 } },
{ { { 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0 } } } },
{ MN_rex_wrb, 0x4d, 0, SPACE_BASE, None,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 1, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0 } },
{ { { 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0 } } } },
{ MN_rex_wrx, 0x4e, 0, SPACE_BASE, None,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 1, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0 } },
{ { { 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0 } } } },
{ MN_rex_wrxb, 0x4f, 0, SPACE_BASE, None,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 1, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0 } },
{ { { 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0 } } } },
{ MN__disp8_, 0x00, 0, SPACE_BASE, Prefix_Disp8,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0 } } } },
{ MN__disp16_, 0x00, 0, SPACE_BASE, Prefix_Disp16,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0 } } } },
{ MN__disp32_, 0x00, 0, SPACE_BASE, Prefix_Disp32,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0 } } } },
{ MN__load_, 0x00, 0, SPACE_BASE, Prefix_Load,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0 } } } },
{ MN__store_, 0x00, 0, SPACE_BASE, Prefix_Store,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0 } } } },
{ MN__vex_, 0x00, 0, SPACE_BASE, Prefix_VEX,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0 } } } },
{ MN__vex2_, 0x00, 0, SPACE_BASE, Prefix_VEX,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0 } } } },
{ MN__vex3_, 0x00, 0, SPACE_BASE, Prefix_VEX3,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0 } } } },
{ MN__evex_, 0x00, 0, SPACE_BASE, Prefix_EVEX,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0 } } } },
{ MN__rex_, 0x00, 0, SPACE_BASE, Prefix_REX,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 1, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0 } },
{ { { 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0 } } } },
{ MN__nooptimize_, 0x00, 0, SPACE_BASE, Prefix_NoOptimize,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0 } } } },
{ MN_bswap, 0xc8, 1, SPACE_0F, None,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 1, 0,
0, 0, 0, 0, 0, 0 } } } },
{ MN_xadd, 0xc0, 2, SPACE_0F, None,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0,
0, 0, 0, 0, 0, 0 } },
{ { 1, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 1, 1, 1, 0, 1, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0,
0, 0, 0, 0, 0, 0 } },
{ { 1, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 1, 1, 1, 0, 1, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0 } } } },
{ MN_wbinvd, 0x09, 0, SPACE_0F, None,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0 } } } },
{ MN_invlpg, 0x01, 1, SPACE_0F, 7,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0 } } } },
{ MN_cpuid, 0xa2, 0, SPACE_0F, None,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0 } } } },
{ MN_wrmsr, 0x30, 0, SPACE_0F, None,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0 } } } },
{ MN_rdtsc, 0x31, 0, SPACE_0F, None,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0 } } } },
{ MN_rdmsr, 0x32, 0, SPACE_0F, None,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0 } } } },
{ MN_cmpxchg8b, 0xc7, 1, SPACE_0F, 1,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 1, 0,
0, 0, 0, 0, 1, 0 } } } },
{ MN_sysenter, 0x34, 0, SPACE_0F, None,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 1, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0 } },
{ { { 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0 } } } },
{ MN_sysenter, 0x34, 0, SPACE_0F, None,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 1, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0 } },
{ { { 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0 } } } },
{ MN_sysexit, 0x35, 0, SPACE_0F, None,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 1, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0 } },
{ { { 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0 } } } },
{ MN_sysexit, 0x35, 0, SPACE_0F, None,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 1, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0 } },
{ { { 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0 } } } },
{ MN_fxsave, 0xae, 1, SPACE_0F, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 1, 0 } } } },
{ MN_fxsave64, 0xae, 1, SPACE_0F, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 1, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0 } },
{ { { 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 1, 0, 1, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 1, 0 } } } },
{ MN_fxrstor, 0xae, 1, SPACE_0F, 1,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 1, 0 } } } },
{ MN_fxrstor64, 0xae, 1, SPACE_0F, 1,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 1, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0 } },
{ { { 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 1, 0, 1, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 1, 0 } } } },
{ MN_rdpmc, 0x33, 0, SPACE_0F, None,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0 } } } },
{ MN_ud2, 0x0b, 0, SPACE_0F, None,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0 } } } },
{ MN_ud2a, 0x0b, 0, SPACE_0F, None,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0 } } } },
{ MN_ud1, 0xb9, 2, SPACE_0F, None,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 1, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 1, 1, 0, 1, 0,
0, 0, 0, 0, 1, 0 } },
{ { 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 0, 1, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 1, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 1, 1, 0, 1, 0,
0, 0, 0, 0, 1, 0 } },
{ { 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 0, 1, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 1, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 1, 1, 0, 1, 0,
0, 0, 0, 0, 1, 0 } },
{ { 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 0, 1, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 1, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 1, 1, 0, 1, 0,
0, 0, 0, 0, 1, 0 } },
{ { 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 0, 1, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 1, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 1, 1, 0, 1, 0,
0, 0, 0, 0, 1, 0 } },
{ { 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 0, 1, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 1, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 1, 1, 0, 1, 0,
0, 0, 0, 0, 1, 0 } },
{ { 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 0, 1, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 1, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 1, 1, 0, 1, 0,
0, 0, 0, 0, 1, 0 } },
{ { 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 0, 1, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 1, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 1, 1, 0, 1, 0,
0, 0, 0, 0, 1, 0 } },
{ { 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 0, 1, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 1, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 1, 1, 0, 1, 0,
0, 0, 0, 0, 1, 0 } },
{ { 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 0, 1, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 1, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 1, 1, 0, 1, 0,
0, 0, 0, 0, 1, 0 } },
{ { 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 0, 1, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 1, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 1, 1, 0, 1, 0,
0, 0, 0, 0, 1, 0 } },
{ { 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 0, 1, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 1, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 1, 1, 0, 1, 0,
0, 0, 0, 0, 1, 0 } },
{ { 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 0, 1, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 1, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 1, 1, 0, 1, 0,
0, 0, 0, 0, 1, 0 } },
{ { 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 0, 1, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 1, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 1, 1, 0, 1, 0,
0, 0, 0, 0, 1, 0 } },
{ { 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 0, 1, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 1, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 1, 1, 0, 1, 0,
0, 0, 0, 0, 1, 0 } },
{ { 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 0, 1, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 1, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 1, 1, 0, 1, 0,
0, 0, 0, 0, 1, 0 } },
{ { 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 0, 1, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 1, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 1, 1, 0, 1, 0,
0, 0, 0, 0, 1, 0 } },
{ { 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 0, 1, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 1, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 1, 1, 0, 1, 0,
0, 0, 0, 0, 1, 0 } },
{ { 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 0, 1, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 1, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 1, 1, 0, 1, 0,
0, 0, 0, 0, 1, 0 } },
{ { 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 0, 1, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 1, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 1, 1, 0, 1, 0,
0, 0, 0, 0, 1, 0 } },
{ { 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 0, 1, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 1, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 1, 1, 0, 1, 0,
0, 0, 0, 0, 1, 0 } },
{ { 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 0, 1, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 1, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 1, 1, 0, 1, 0,
0, 0, 0, 0, 1, 0 } },
{ { 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 0, 1, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 1, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 1, 1, 0, 1, 0,
0, 0, 0, 0, 1, 0 } },
{ { 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 0, 1, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 1, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 1, 1, 0, 1, 0,
0, 0, 0, 0, 1, 0 } },
{ { 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 0, 1, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 1, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 1, 1, 0, 1, 0,
0, 0, 0, 0, 1, 0 } },
{ { 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 0, 1, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 1, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 1, 1, 0, 1, 0,
0, 0, 0, 0, 1, 0 } },
{ { 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 0, 1, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 1, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 1, 1, 0, 1, 0,
0, 0, 0, 0, 1, 0 } },
{ { 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 0, 1, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 1, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 1, 1, 0, 1, 0,
0, 0, 0, 0, 1, 0 } },
{ { 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 0, 1, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 1, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 1, 1, 0, 1, 0,
0, 0, 0, 0, 1, 0 } },
{ { 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 0, 1, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 1, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 1, 1, 0, 1, 0,
0, 0, 0, 0, 1, 0 } },
{ { 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 0, 1, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 1, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 1, 1, 0, 1, 0,
0, 0, 0, 0, 1, 0 } },
{ { 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 0, 1, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 1, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 1, 1, 0, 1, 0,
0, 0, 0, 0, 1, 0 } },
{ { 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 0, 1, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 1, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 1, 1, 0, 1, 0,
0, 0, 0, 0, 1, 0 } },
{ { 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 0, 1, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1,
0, 0, 0, 0, 0, 0 } },
{ { 0, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1,
0, 0, 0, 0, 0, 0 } },
{ { 0, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1,
0, 0, 0, 0, 0, 0 } },
{ { 0, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1,
0, 0, 0, 0, 0, 0 } },
{ { 0, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1,
0, 0, 0, 0, 0, 0 } },
{ { 0, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1,
0, 0, 0, 0, 0, 0 } },
{ { 0, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1,
0, 0, 0, 0, 0, 0 } },
{ { 0, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1,
0, 0, 0, 0, 0, 0 } },
{ { 0, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1,
0, 0, 0, 0, 0, 0 } },
{ { 0, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1,
0, 0, 0, 0, 0, 0 } },
{ { 0, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1,
0, 0, 0, 0, 0, 0 } },
{ { 0, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1,
0, 0, 0, 0, 0, 0 } },
{ { 0, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1,
0, 0, 0, 0, 0, 0 } },
{ { 0, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0 } } } },
{ MN_fcomi, 0xdb, 1, SPACE_BASE, 6,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1,
0, 0, 0, 0, 0, 0 } } } },
{ MN_fucomi, 0xdb, 2, SPACE_BASE, 5,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1,
0, 0, 0, 0, 0, 0 } },
{ { 0, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0 } } } },
{ MN_fucomi, 0xdb, 1, SPACE_BASE, 5,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1,
0, 0, 0, 0, 0, 0 } } } },
{ MN_fcomip, 0xdf, 2, SPACE_BASE, 6,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1,
0, 0, 0, 0, 0, 0 } },
{ { 0, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0 } } } },
{ MN_fcomip, 0xdf, 1, SPACE_BASE, 6,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1,
0, 0, 0, 0, 0, 0 } } } },
{ MN_fcompi, 0xdf, 2, SPACE_BASE, 6,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1,
0, 0, 0, 0, 0, 0 } },
{ { 0, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0 } } } },
{ MN_fcompi, 0xdf, 1, SPACE_BASE, 6,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1,
0, 0, 0, 0, 0, 0 } } } },
{ MN_fucomip, 0xdf, 2, SPACE_BASE, 5,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1,
0, 0, 0, 0, 0, 0 } },
{ { 0, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0 } } } },
{ MN_fucomip, 0xdf, 1, SPACE_BASE, 5,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1,
0, 0, 0, 0, 0, 0 } } } },
{ MN_fucompi, 0xdf, 2, SPACE_BASE, 5,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1,
0, 0, 0, 0, 0, 0 } },
{ { 0, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0 } } } },
{ MN_fucompi, 0xdf, 1, SPACE_BASE, 5,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1,
0, 0, 0, 0, 0, 0 } } } },
{ MN_movnti, 0xc3, 2, SPACE_0F, None,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 1, 0,
0, 0, 0, 0, 0, 0 } },
{ { 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 1, 0, 1, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0 } } } },
{ MN_lfence, 0xaee8, 0, SPACE_0F, None,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0 } } } },
{ MN_mfence, 0xaef0, 0, SPACE_0F, None,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0 } } } },
{ MN_pause, 0x90, 0, SPACE_BASE, None,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0 } } } },
{ MN_emms, 0x77, 0, SPACE_0F, None,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0 } } } },
{ MN_movd, 0x6e, 2, SPACE_0F, None,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 1, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 1, 0, 0, 0,
0, 0, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 1, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0 } },
{ { { 1, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 1, 0, 1, 0, 0, 0, 0, 1, 0,
0, 0, 0, 0, 0, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 1, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 1, 0, 0, 0,
0, 0, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 1, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0 } },
{ { { 1, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 1, 0, 1, 0, 0, 0, 0, 1, 0,
0, 0, 0, 0, 0, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 1, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 1, 0, 0, 0,
0, 0, 0, 0, 1, 0 } },
{ { 6, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 1, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0 } },
{ { { 1, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 1, 0, 1, 0, 0, 0, 0, 1, 0,
0, 0, 0, 0, 0, 0 } },
{ { 6, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 1, 0,
1, 0, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
1, 0, 0, 0, 0, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 1, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 1, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0 } },
{ { { 1, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 1, 0, 1, 0, 0, 0, 0, 1, 0,
0, 0, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 1, 0,
1, 0, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
1, 0, 0, 0, 0, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 1, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 1, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0 } },
{ { { 1, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 1, 0, 1, 0, 0, 0, 0, 1, 0,
0, 0, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 6, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 1, 0,
0, 0, 0, 0, 1, 0 } },
{ { 6, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 1, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0 } },
{ { { 1, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 1, 0, 1, 0, 0, 0, 0, 1, 0,
0, 0, 0, 0, 1, 0 } },
{ { 6, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0,
1, 0, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0,
1, 0, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 6, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 1, 0,
0, 0, 0, 0, 1, 0 } },
{ { 6, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0,
1, 0, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0,
1, 0, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 6, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 1, 0,
0, 0, 0, 0, 1, 0 } },
{ { 6, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0,
1, 0, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0,
1, 0, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 6, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 1, 0,
0, 0, 0, 0, 1, 0 } },
{ { 6, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0,
1, 0, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0,
1, 0, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 6, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 1, 0,
0, 0, 0, 0, 1, 0 } },
{ { 6, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0,
1, 0, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0,
1, 0, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 6, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 1, 0,
0, 0, 0, 0, 1, 0 } },
{ { 6, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0,
1, 0, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0,
1, 0, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 6, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 1, 0,
0, 0, 0, 0, 1, 0 } },
{ { 6, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0,
1, 0, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0,
1, 0, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 6, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 1, 0,
0, 0, 0, 0, 1, 0 } },
{ { 6, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0,
1, 0, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0,
1, 0, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 6, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 1, 0,
0, 0, 0, 0, 1, 0 } },
{ { 6, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0,
1, 0, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0,
1, 0, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 6, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 1, 0,
0, 0, 0, 0, 1, 0 } },
{ { 6, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0,
1, 0, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0,
1, 0, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 6, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 1, 0,
0, 0, 0, 0, 1, 0 } },
{ { 6, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0,
1, 0, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0,
1, 0, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 6, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 1, 0,
0, 0, 0, 0, 1, 0 } },
{ { 6, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0,
1, 0, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0,
1, 0, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 6, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 1, 0,
0, 0, 0, 0, 1, 0 } },
{ { 6, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0,
1, 0, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0,
1, 0, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 6, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 1, 0,
0, 0, 0, 0, 1, 0 } },
{ { 6, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0,
1, 0, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0,
1, 0, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 6, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 1, 0,
0, 0, 0, 0, 1, 0 } },
{ { 6, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0,
1, 0, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0,
1, 0, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 6, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 1, 0,
0, 0, 0, 0, 1, 0 } },
{ { 6, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0,
1, 0, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0,
1, 0, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 6, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 1, 0,
0, 0, 0, 0, 1, 0 } },
{ { 6, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0 } } } },
{ MN_pcmpgtb, 0x64 | 0, 2, SPACE_0F, None,
{ 0, 0, 0, 1, 0, 0, 0, 0, 0, 0, 1, 1, 1, 1, 1, 0, 0, 0, 0, 0,
- 0, 0, 0, 1, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0, 1, 0, 0, 0, 0 },
+ 0, 0, 0, 1, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 },
{ { 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0,
1, 0, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
1, 0, 0, 0, 0, 0 } } } },
{ MN_pcmpgtb, 0x64 | 0, 2, SPACE_0F, None,
{ 0, 0, 0, 1, 0, 0, 0, 0, 0, 0, 1, 1, 1, 1, 1, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 1, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0, 0, 0 },
+ 0, 0, 0, 0, 0, 0, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 },
{ { 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0,
1, 0, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
1, 0, 0, 0, 0, 0 } } } },
{ MN_pcmpgtb, 0x64 | 0, 2, SPACE_0F, None,
{ 0, 0, 0, 1, 0, 0, 0, 0, 0, 0, 1, 1, 1, 1, 1, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0, 0, 0 },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 },
{ { 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 6, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 1, 0,
0, 0, 0, 0, 1, 0 } },
{ { 6, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0 } } } },
{ MN_pcmpgtw, 0x64 | 1, 2, SPACE_0F, None,
{ 0, 0, 0, 1, 0, 0, 0, 0, 0, 0, 1, 1, 1, 1, 1, 0, 0, 0, 0, 0,
- 0, 0, 0, 1, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0, 1, 0, 0, 0, 0 },
+ 0, 0, 0, 1, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 },
{ { 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0,
1, 0, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
1, 0, 0, 0, 0, 0 } } } },
{ MN_pcmpgtw, 0x64 | 1, 2, SPACE_0F, None,
{ 0, 0, 0, 1, 0, 0, 0, 0, 0, 0, 1, 1, 1, 1, 1, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 1, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0, 0, 0 },
+ 0, 0, 0, 0, 0, 0, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 },
{ { 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0,
1, 0, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
1, 0, 0, 0, 0, 0 } } } },
{ MN_pcmpgtw, 0x64 | 1, 2, SPACE_0F, None,
{ 0, 0, 0, 1, 0, 0, 0, 0, 0, 0, 1, 1, 1, 1, 1, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0, 0, 0 },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 },
{ { 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 6, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 1, 0,
0, 0, 0, 0, 1, 0 } },
{ { 6, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0 } } } },
{ MN_pcmpgtd, 0x66, 2, SPACE_0F, None,
{ 0, 0, 0, 1, 0, 0, 0, 0, 0, 0, 1, 1, 1, 1, 1, 0, 0, 0, 0, 0,
- 0, 0, 0, 1, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0, 1, 0, 0, 0, 0 },
+ 0, 0, 0, 1, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 },
{ { 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0,
1, 0, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
1, 0, 0, 0, 0, 0 } } } },
{ MN_pcmpgtd, 0x66, 2, SPACE_0F, None,
{ 0, 0, 0, 1, 0, 0, 0, 0, 0, 0, 1, 1, 1, 1, 1, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 1, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0, 0, 0 },
+ 0, 0, 0, 0, 0, 0, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 },
{ { 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0,
1, 0, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
1, 0, 0, 0, 0, 0 } } } },
{ MN_pcmpgtd, 0x66, 2, SPACE_0F, None,
{ 0, 0, 0, 1, 0, 0, 0, 0, 0, 0, 1, 1, 1, 1, 1, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0, 0, 0 },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 },
{ { 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 6, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 1, 0,
0, 0, 0, 0, 1, 0 } },
{ { 6, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0,
1, 0, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0,
1, 0, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 6, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 1, 0,
0, 0, 0, 0, 1, 0 } },
{ { 6, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0,
1, 0, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0,
1, 0, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 6, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 1, 0,
0, 0, 0, 0, 1, 0 } },
{ { 6, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0,
1, 0, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0,
1, 0, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 6, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 1, 0,
0, 0, 0, 0, 1, 0 } },
{ { 6, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0,
1, 0, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0,
1, 0, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 6, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 1, 0,
0, 0, 0, 0, 1, 0 } },
{ { 6, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0,
1, 0, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0,
1, 0, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 6, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 1, 0,
0, 0, 0, 0, 1, 0 } },
{ { 6, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 0, 0, 0, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 0, 0, 0, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 0, 0, 0, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0 } },
{ { 6, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0,
1, 0, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0,
1, 0, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 6, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 1, 0,
0, 0, 0, 0, 1, 0 } },
{ { 6, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 0, 0, 0, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 0, 0, 0, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 0, 0, 0, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0 } },
{ { 6, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0,
1, 0, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0,
1, 0, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 6, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 1, 0,
0, 0, 0, 0, 1, 0 } },
{ { 6, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 0, 0, 0, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 0, 0, 0, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 0, 0, 0, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0 } },
{ { 6, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0,
1, 0, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0,
1, 0, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 6, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 1, 0,
0, 0, 0, 0, 1, 0 } },
{ { 6, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 0, 0, 0, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 0, 0, 0, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 0, 0, 0, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0 } },
{ { 6, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0,
1, 0, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0,
1, 0, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 6, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 1, 0,
0, 0, 0, 0, 1, 0 } },
{ { 6, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 0, 0, 0, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 0, 0, 0, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 0, 0, 0, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0 } },
{ { 6, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0,
1, 0, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0,
1, 0, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 6, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 1, 0,
0, 0, 0, 0, 1, 0 } },
{ { 6, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 0, 0, 0, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 0, 0, 0, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 0, 0, 0, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0 } },
{ { 6, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0,
1, 0, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0,
1, 0, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 6, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 1, 0,
0, 0, 0, 0, 1, 0 } },
{ { 6, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 0, 0, 0, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 0, 0, 0, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 0, 0, 0, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0 } },
{ { 6, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0,
1, 0, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0,
1, 0, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 6, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 1, 0,
0, 0, 0, 0, 1, 0 } },
{ { 6, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 0, 0, 0, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 0, 0, 0, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 0, 0, 0, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0 } },
{ { 6, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0,
1, 0, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0,
1, 0, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 6, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 1, 0,
0, 0, 0, 0, 1, 0 } },
{ { 6, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0,
1, 0, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0,
1, 0, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 6, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 1, 0,
0, 0, 0, 0, 1, 0 } },
{ { 6, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0,
1, 0, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0,
1, 0, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 6, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 1, 0,
0, 0, 0, 0, 1, 0 } },
{ { 6, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0,
1, 0, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0,
1, 0, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 6, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 1, 0,
0, 0, 0, 0, 1, 0 } },
{ { 6, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0,
1, 0, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0,
1, 0, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 6, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 1, 0,
0, 0, 0, 0, 1, 0 } },
{ { 6, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0,
1, 0, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0,
1, 0, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 6, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 1, 0,
0, 0, 0, 0, 1, 0 } },
{ { 6, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0,
1, 0, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0,
1, 0, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 6, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 1, 0,
0, 0, 0, 0, 1, 0 } },
{ { 6, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0,
1, 0, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0,
1, 0, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 6, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 1, 0,
0, 0, 0, 0, 1, 0 } },
{ { 6, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0,
1, 0, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0,
1, 0, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 6, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 1, 0,
0, 0, 0, 0, 1, 0 } },
{ { 6, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0,
1, 0, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0,
1, 0, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 6, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 1, 0,
0, 0, 0, 0, 1, 0 } },
{ { 6, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0,
1, 0, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0,
1, 0, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 6, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 1, 0,
0, 0, 0, 0, 1, 0 } },
{ { 6, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0,
1, 0, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0,
1, 0, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 6, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 1, 0, 0, 0,
0, 0, 0, 0, 1, 0 } },
{ { 6, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0,
1, 0, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0,
1, 0, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 6, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 1, 0, 0, 0,
0, 0, 0, 0, 1, 0 } },
{ { 6, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0,
1, 0, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0,
1, 0, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 6, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 1, 0, 0, 0,
0, 0, 0, 0, 1, 0 } },
{ { 6, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0,
1, 0, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0,
1, 0, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 6, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 1, 0,
0, 0, 0, 0, 1, 0 } },
{ { 6, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0,
1, 0, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0,
1, 0, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 1, 0, 0, 0,
1, 0, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 1, 0, 0, 0,
1, 0, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0,
1, 0, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0,
1, 0, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0,
1, 0, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0,
1, 0, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0,
1, 0, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0,
1, 0, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0,
1, 0, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0,
1, 0, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0,
1, 0, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0,
1, 0, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0,
1, 0, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0,
1, 0, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0,
1, 0, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0,
1, 0, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0,
1, 0, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0,
1, 0, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0,
1, 0, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0,
1, 0, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0,
1, 0, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0,
1, 0, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 1, 0, 0, 0,
1, 0, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 1, 0, 0, 0,
1, 0, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 1, 0, 0, 0,
1, 0, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 1, 0, 0, 0,
1, 0, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 1, 0, 0, 0,
1, 0, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 1, 0, 0, 0,
1, 0, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 1, 0, 0, 0,
1, 0, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 1, 0, 0, 0,
1, 0, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 1, 0, 0, 0,
1, 0, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 1, 0, 0, 0,
1, 0, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 1, 0, 0, 0,
1, 0, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 1, 0, 0, 0,
1, 0, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 1, 0, 0, 0,
1, 0, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 1, 0, 0, 0,
1, 0, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 1, 0, 0, 0,
1, 0, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 1, 0, 0, 0,
1, 0, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 0, 0, 0, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 0, 0, 0, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 0, 0, 0, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 1, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 0, 0, 0, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 1, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 1, 0, 0, 0,
1, 0, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 1, 0, 0, 0,
1, 0, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 6, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 1, 0,
0, 0, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 1, 0,
1, 0, 0, 0, 1, 0 } },
{ { 6, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 1, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0 } },
{ { { 1, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 1, 0, 0, 0,
0, 0, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 1, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0 } },
{ { { 1, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 1, 0, 0, 0,
0, 0, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 1, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0 } },
{ { { 1, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 1, 0, 1, 0, 0, 1, 0, 1, 0,
0, 0, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 1, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0 } },
{ { { 1, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 1, 0, 1, 0, 0, 1, 0, 1, 0,
0, 0, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 1, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0 } },
{ { { 1, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 1, 0, 1, 0, 0, 1, 0, 1, 0,
0, 0, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 1, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0 } },
{ { { 1, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 1, 0, 1, 0, 0, 1, 0, 1, 0,
0, 0, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 1, 0, 0, 0,
1, 0, 0, 0, 1, 0 } },
{ { 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 1, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 1, 0, 0, 0,
1, 0, 0, 0, 1, 0 } },
{ { 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 1, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 1, 0,
1, 0, 0, 0, 1, 0 } },
{ { 6, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 1, 0, 0, 0,
1, 0, 0, 0, 1, 0 } },
{ { 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 1, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 1, 0, 0, 0,
1, 0, 0, 0, 1, 0 } },
{ { 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 1, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0,
1, 0, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0,
1, 0, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 1, 0, 0, 0,
1, 0, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 1, 0, 0, 0,
1, 0, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 1, 0, 0, 0,
0, 0, 0, 0, 1, 0 } } } },
{ MN_ldmxcsr, 0xae, 1, SPACE_0F, 2,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 1, 0, 0, 0,
0, 0, 0, 0, 1, 0 } } } },
{ MN_maskmovq, 0xf7, 2, SPACE_0F, None,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 6, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0 } },
{ { 6, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0,
1, 0, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0,
1, 0, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 1, 0, 0, 0,
1, 0, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 1, 0, 0, 0,
1, 0, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0,
1, 0, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0,
1, 0, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 1, 0, 0, 0,
1, 0, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 1, 0, 0, 0,
1, 0, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0,
1, 0, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0,
1, 0, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
1, 0, 0, 0, 0, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
1, 0, 0, 0, 0, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 1, 0,
0, 0, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
1, 0, 0, 0, 0, 0 } },
{ { 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 1, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 1, 0,
0, 0, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
1, 0, 0, 0, 0, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
1, 0, 0, 0, 0, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 1, 0,
0, 0, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
1, 0, 0, 0, 0, 0 } },
{ { 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 1, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 1, 0,
0, 0, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
1, 0, 0, 0, 0, 0 } },
{ { 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 1, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
1, 0, 0, 0, 0, 0 } },
{ { 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 1, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
1, 0, 0, 0, 0, 0 } },
{ { 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
1, 0, 0, 0, 0, 0 } },
{ { 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 6, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0 } },
{ { 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 1, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
1, 0, 0, 0, 0, 0 } },
{ { 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
1, 0, 0, 0, 0, 0 } },
{ { 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 1, 0, 0, 0,
0, 0, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
1, 0, 0, 0, 0, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 1, 0, 0, 0,
1, 0, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0,
1, 0, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0,
1, 0, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0,
1, 0, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0,
1, 0, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 1, 0, 0, 0,
1, 0, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 1, 0, 0, 0,
1, 0, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0,
1, 0, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0,
1, 0, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 6, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 1, 0,
0, 0, 0, 0, 1, 0 } },
{ { 6, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0,
1, 0, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0,
1, 0, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 6, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 1, 0,
0, 0, 0, 0, 1, 0 } },
{ { 6, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0,
1, 0, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0,
1, 0, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 0, 0, 0, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 0, 0, 0, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 0, 0, 0, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0 } },
{ { 6, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 0, 0, 0, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 0, 0, 0, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 0, 0, 0, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 0, 0, 0, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 0, 0, 0, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0 } },
{ { 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 1, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 0, 0, 0, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0 } },
{ { 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 1, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 0, 0, 0, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0 } },
{ { 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 1, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 0, 0, 0, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0 } },
{ { 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 1, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 0, 0, 0, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0 } },
{ { 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 1, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 0, 0, 0, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0 } },
{ { 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 1, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0,
1, 0, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0,
1, 0, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 6, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 1, 0,
0, 0, 0, 0, 1, 0 } },
{ { 6, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0,
1, 0, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0,
1, 0, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 6, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 1, 0,
0, 0, 0, 0, 1, 0 } },
{ { 6, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0,
1, 0, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0,
1, 0, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 6, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 1, 0,
0, 0, 0, 0, 1, 0 } },
{ { 6, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0,
1, 0, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0,
1, 0, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 6, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 1, 0,
0, 0, 0, 0, 1, 0 } },
{ { 6, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
1, 0, 0, 0, 0, 0 } },
{ { 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 1, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
1, 0, 0, 0, 0, 0 } },
{ { 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 1, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 6, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0 } },
{ { 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 1, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0,
1, 0, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0,
1, 0, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 6, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 1, 0,
0, 0, 0, 0, 1, 0 } },
{ { 6, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0 } } } },
{ MN_prefetcht0, 0x18, 1, SPACE_0F, 1,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0 } } } },
{ MN_prefetcht1, 0x18, 1, SPACE_0F, 2,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0 } } } },
{ MN_prefetcht2, 0x18, 1, SPACE_0F, 3,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0 } } } },
{ MN_psadbw, 0xf6, 2, SPACE_0F, None,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 6, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 1, 0,
0, 0, 0, 0, 1, 0 } },
{ { 6, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0,
1, 0, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0,
1, 0, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 0, 0, 0, 1, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0 } },
{ { 6, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 1, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0,
1, 0, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0,
1, 0, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 1, 0, 0, 0,
1, 0, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 1, 0, 0, 0,
1, 0, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0,
1, 0, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0,
1, 0, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 1, 0, 0, 0,
1, 0, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 1, 0, 0, 0,
1, 0, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0 } } } },
{ MN_shufps, 0xc6, 3, SPACE_0F, None,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 0, 0, 0, 1, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 0, 0, 0, 1, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0,
1, 0, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0,
1, 0, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 1, 0, 0, 0,
1, 0, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 1, 0, 0, 0,
1, 0, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 1, 0, 0, 0,
0, 0, 0, 0, 1, 0 } } } },
{ MN_stmxcsr, 0xae, 1, SPACE_0F, 3,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 1, 0, 0, 0,
0, 0, 0, 0, 1, 0 } } } },
{ MN_subps, 0x5c, 2, SPACE_0F, None,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0,
1, 0, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0,
1, 0, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 1, 0, 0, 0,
1, 0, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 1, 0, 0, 0,
1, 0, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 1, 0, 0, 0,
1, 0, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 1, 0, 0, 0,
1, 0, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0,
1, 0, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0,
1, 0, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0,
1, 0, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0,
1, 0, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0,
1, 0, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0,
1, 0, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0,
1, 0, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0,
1, 0, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 1, 0,
1, 0, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 1, 0,
1, 0, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0,
1, 0, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0,
1, 0, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0,
1, 0, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0,
1, 0, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0,
1, 0, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0,
1, 0, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0,
1, 0, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0,
1, 0, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0,
1, 0, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0,
1, 0, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0,
1, 0, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0,
1, 0, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0,
1, 0, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0,
1, 0, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0,
1, 0, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0,
1, 0, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0,
1, 0, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0,
1, 0, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0,
1, 0, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0,
1, 0, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 1, 0,
1, 0, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 1, 0,
1, 0, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 1, 0,
1, 0, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 1, 0,
1, 0, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 1, 0,
1, 0, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 1, 0,
1, 0, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 1, 0,
1, 0, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 1, 0,
1, 0, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 1, 0,
1, 0, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 1, 0,
1, 0, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 1, 0,
1, 0, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 1, 0,
1, 0, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 1, 0,
1, 0, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 1, 0,
1, 0, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 1, 0,
1, 0, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 1, 0,
1, 0, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 0, 0, 0, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 0, 0, 0, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 0, 0, 0, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 1, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 0, 0, 0, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 1, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 1, 0,
1, 0, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 1, 0,
1, 0, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 6, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 1, 0,
0, 0, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 1, 0,
0, 0, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 1, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0 } },
{ { { 1, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 1, 0, 0, 0,
0, 0, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 1, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0 } },
{ { { 1, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 1, 0, 0, 0,
0, 0, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 1, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0 } },
{ { { 1, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 1, 0, 1, 0, 0, 1, 0, 1, 0,
0, 0, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 1, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0 } },
{ { { 1, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 1, 0, 1, 0, 0, 1, 0, 1, 0,
0, 0, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 1, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0 } },
{ { { 1, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 1, 0, 1, 0, 0, 1, 0, 1, 0,
0, 0, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 1, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0 } },
{ { { 1, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 1, 0, 1, 0, 0, 1, 0, 1, 0,
0, 0, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0,
1, 0, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0,
1, 0, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 1, 0,
1, 0, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 1, 0,
1, 0, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0,
1, 0, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0,
1, 0, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 1, 0,
1, 0, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 1, 0,
1, 0, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0,
1, 0, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0,
1, 0, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 1, 0,
1, 0, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 1, 0,
1, 0, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0,
1, 0, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0,
1, 0, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 1, 0,
0, 0, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
1, 0, 0, 0, 0, 0 } },
{ { 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 1, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 1, 0,
0, 0, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 1, 0,
0, 0, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
1, 0, 0, 0, 0, 0 } },
{ { 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 1, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 1, 0,
0, 0, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
1, 0, 0, 0, 0, 0 } },
{ { 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 1, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
1, 0, 0, 0, 0, 0 } },
{ { 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 1, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
1, 0, 0, 0, 0, 0 } },
{ { 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
1, 0, 0, 0, 0, 0 } },
{ { 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 1, 0,
0, 0, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
1, 0, 0, 0, 0, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 1, 0,
1, 0, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0,
1, 0, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0,
1, 0, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0,
1, 0, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0,
1, 0, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 1, 0,
1, 0, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 1, 0,
1, 0, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0,
1, 0, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0,
1, 0, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 0, 0, 0, 1, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 0, 0, 0, 1, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0,
1, 0, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0,
1, 0, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 1, 0,
1, 0, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 1, 0,
1, 0, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0,
1, 0, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0,
1, 0, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 1, 0,
1, 0, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 1, 0,
1, 0, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 1, 0,
1, 0, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 1, 0,
1, 0, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0,
1, 0, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0,
1, 0, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0,
1, 0, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0,
1, 0, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0,
1, 0, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0,
1, 0, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 1, 0,
1, 0, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 1, 0,
1, 0, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0,
1, 0, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0,
1, 0, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0,
1, 0, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0,
1, 0, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0,
1, 0, 0, 0, 1, 0 } },
{ { 6, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0,
1, 0, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0,
1, 0, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 1, 0,
1, 0, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 1, 0,
1, 0, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0,
1, 0, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0,
1, 0, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 1, 0,
1, 0, 0, 0, 1, 0 } },
{ { 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 1, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 1, 0,
1, 0, 0, 0, 1, 0 } },
{ { 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 1, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 1, 0,
1, 0, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 1, 0,
1, 0, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 1, 0, 0, 0,
1, 0, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 1, 0, 0, 0,
1, 0, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0,
1, 0, 0, 0, 1, 0 } },
{ { 6, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 1, 0,
1, 0, 0, 0, 1, 0 } },
{ { 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 1, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 1, 0,
1, 0, 0, 0, 1, 0 } },
{ { 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 1, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0,
1, 0, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0,
1, 0, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0,
1, 0, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0,
1, 0, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
1, 0, 0, 0, 0, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
1, 0, 0, 0, 0, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0,
1, 0, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0,
1, 0, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0,
1, 0, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0,
1, 0, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
1, 0, 0, 0, 0, 0 } },
{ { 6, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 6, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0,
1, 0, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0,
1, 0, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 6, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 1, 0,
0, 0, 0, 0, 1, 0 } },
{ { 6, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 0, 0, 0, 1, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 0, 0, 0, 1, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 0, 0, 0, 1, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 0, 0, 0, 1, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 0, 0, 0, 1, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 0, 0, 0, 1, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 0, 0, 0, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 0, 0, 0, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 0, 0, 0, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 0, 0, 0, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0,
1, 0, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0,
1, 0, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0,
1, 0, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0,
1, 0, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0,
1, 0, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0,
1, 0, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0,
1, 0, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0,
1, 0, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0,
1, 0, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0,
1, 0, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0,
1, 0, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0,
1, 0, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0,
1, 0, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0,
1, 0, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0,
1, 0, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0,
1, 0, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0,
1, 0, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0,
1, 0, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 1, 0,
1, 0, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 1, 0,
1, 0, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0,
1, 0, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0,
1, 0, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0,
1, 0, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0,
1, 0, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 1, 1, 0, 0, 0,
0, 0, 0, 0, 1, 0 } } } },
{ MN_fisttp, 0xdd, 1, SPACE_BASE, 1,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 1, 0,
0, 0, 0, 0, 1, 0 } } } },
{ MN_fisttpll, 0xdd, 1, SPACE_BASE, 1,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 1, 0 } } } },
{ MN_cmpxchg16b, 0xc7, 1, SPACE_0F, 1,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 1, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0 } },
{ { { 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 1, 0, 1, 0, 0, 0, 0, 0, 0,
1, 0, 0, 0, 1, 0 } } } },
{ MN_monitor, 0x01c8, 0, SPACE_0F, None,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0 } } } },
{ MN_monitor, 0x01c8, 3, SPACE_0F, None,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 0, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 0, 1, 0,
0, 0, 0, 0, 0, 0 } },
{ { 0, 2, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 1, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0 } },
{ { { 0, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 1, 0,
0, 0, 0, 0, 0, 0 } },
{ { 0, 2, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0 } } } },
{ MN_mwait, 0x01c9, 2, SPACE_0F, None,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 0, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 1, 0,
0, 0, 0, 0, 0, 0 } },
{ { 0, 2, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 1, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0 } } } },
{ MN_vmclear, 0xc7, 1, SPACE_0F, 6,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 1, 0,
0, 0, 0, 0, 1, 0 } } } },
{ MN_vmlaunch, 0x01c2, 0, SPACE_0F, None,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0 } } } },
{ MN_vmresume, 0x01c3, 0, SPACE_0F, None,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0 } } } },
{ MN_vmptrld, 0xc7, 1, SPACE_0F, 6,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 1, 0,
0, 0, 0, 0, 1, 0 } } } },
{ MN_vmptrst, 0xc7, 1, SPACE_0F, 7,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 1, 0,
0, 0, 0, 0, 1, 0 } } } },
{ MN_vmread, 0x78, 2, SPACE_0F, None,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 1, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0 } },
{ { { 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0, 0,
0, 0, 0, 0, 0, 0 } },
{ { 1, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 1, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 1, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0 } },
{ { { 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0,
0, 0, 0, 0, 0, 0 } },
{ { 1, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 1, 0, 1, 0, 0, 0, 0, 1, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 1, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0 } },
{ { { 1, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 1, 0, 0, 0,
0, 0, 0, 0, 1, 0 } },
{ { 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 1, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0 } },
{ { { 1, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 1, 0, 1, 0, 0, 0, 0, 1, 0,
0, 0, 0, 0, 1, 0 } },
{ { 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0 } } } },
{ MN_vmxon, 0xc7, 1, SPACE_0F, 6,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 1, 0,
0, 0, 0, 0, 1, 0 } } } },
{ MN_vmfunc, 0x01d4, 0, SPACE_0F, None,
0, 0, 0, 0, 0, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0 } } } },
{ MN_getsec, 0x37, 0, SPACE_0F, None,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0 } } } },
{ MN_invept, 0x80, 2, SPACE_0F38, None,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 1, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0 } },
{ { { 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0,
1, 0, 0, 0, 1, 0 } },
{ { 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 1, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0 } },
{ { { 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 1, 0, 1, 0, 0, 0, 0, 0, 0,
1, 0, 0, 0, 1, 0 } },
{ { 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 1, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0 } },
{ { { 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0,
1, 0, 0, 0, 1, 0 } },
{ { 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 1, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0 } },
{ { { 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 1, 0, 1, 0, 0, 0, 0, 0, 0,
1, 0, 0, 0, 1, 0 } },
{ { 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0,
0, 0, 0, 0, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 1, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0 } },
{ { { 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0,
1, 0, 0, 0, 1, 0 } },
{ { 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0, 0,
0, 0, 0, 0, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 1, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0 } },
{ { { 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 1, 0, 1, 0, 0, 0, 0, 0, 0,
1, 0, 0, 0, 1, 0 } },
{ { 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0,
1, 0, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0,
1, 0, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 6, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 1, 0,
0, 0, 0, 0, 1, 0 } },
{ { 6, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0,
1, 0, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0,
1, 0, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 6, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 1, 0,
0, 0, 0, 0, 1, 0 } },
{ { 6, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0,
1, 0, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0,
1, 0, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 6, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 1, 0,
0, 0, 0, 0, 1, 0 } },
{ { 6, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0,
1, 0, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0,
1, 0, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 6, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 1, 0,
0, 0, 0, 0, 1, 0 } },
{ { 6, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0,
1, 0, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0,
1, 0, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 6, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 1, 0,
0, 0, 0, 0, 1, 0 } },
{ { 6, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0,
1, 0, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0,
1, 0, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 6, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 1, 0,
0, 0, 0, 0, 1, 0 } },
{ { 6, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0,
1, 0, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0,
1, 0, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 6, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 1, 0,
0, 0, 0, 0, 1, 0 } },
{ { 6, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0,
1, 0, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0,
1, 0, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 6, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 1, 0,
0, 0, 0, 0, 1, 0 } },
{ { 6, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0,
1, 0, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0,
1, 0, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 6, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 1, 0,
0, 0, 0, 0, 1, 0 } },
{ { 6, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0,
1, 0, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0,
1, 0, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 6, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 1, 0,
0, 0, 0, 0, 1, 0 } },
{ { 6, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0,
1, 0, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0,
1, 0, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 6, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 1, 0,
0, 0, 0, 0, 1, 0 } },
{ { 6, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0,
1, 0, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0,
1, 0, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 6, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 1, 0,
0, 0, 0, 0, 1, 0 } },
{ { 6, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 0, 0, 0, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 0, 0, 0, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 0, 0, 0, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0 } },
{ { 6, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 1, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0,
1, 0, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0,
1, 0, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 6, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 1, 0,
0, 0, 0, 0, 1, 0 } },
{ { 6, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0,
1, 0, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0,
1, 0, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 6, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 1, 0,
0, 0, 0, 0, 1, 0 } },
{ { 6, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0,
1, 0, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0,
1, 0, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 6, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 1, 0,
0, 0, 0, 0, 1, 0 } },
{ { 6, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 0, 0, 0, 1, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 0, 0, 0, 1, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 0, 0, 0, 1, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 0, 0, 0, 1, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 0, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
1, 0, 0, 0, 0, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0,
1, 0, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 0, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
1, 0, 0, 0, 0, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0,
1, 0, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 0, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
1, 0, 0, 0, 0, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0,
1, 0, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 0, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
1, 0, 0, 0, 0, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0,
1, 0, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 0, 0, 0, 1, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 0, 0, 0, 1, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 0, 0, 0, 1, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 0, 0, 0, 1, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 0, 0, 0, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 1, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0 } },
{ { { 0, 0, 0, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 0, 0, 0, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 1, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0 } },
{ { { 0, 0, 0, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 0, 0, 0, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 1, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 0, 0, 0, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 1, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0,
1, 0, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0,
1, 0, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 0, 0, 0, 1, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 0, 0, 0, 1, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0,
1, 0, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0,
1, 0, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 0, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
1, 0, 0, 0, 0, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0,
1, 0, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 0, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
1, 0, 0, 0, 0, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0,
1, 0, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 0, 0, 0, 1, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 0, 0, 0, 1, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0,
1, 0, 0, 0, 0, 0 } } } },
{ MN_pcmpeqq, 0x29, 2, SPACE_0F38, None,
{ 0, 0, 0, 1, 0, 0, 0, 0, 0, 0, 1, 1, 1, 1, 1, 0, 0, 0, 0, 0,
- 0, 0, 0, 1, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0, 1, 0, 0, 0, 0 },
+ 0, 0, 0, 1, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 },
{ { 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0,
1, 0, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
1, 0, 0, 0, 0, 0 } } } },
{ MN_pcmpeqq, 0x29, 2, SPACE_0F38, None,
{ 0, 0, 0, 1, 0, 0, 0, 0, 0, 0, 1, 1, 1, 1, 1, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 1, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0, 0, 0 },
+ 0, 0, 0, 0, 0, 0, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 },
{ { 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0,
1, 0, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 0, 0, 0, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 0, 0, 0, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 0, 0, 0, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 0, 0, 0, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 0, 0, 0, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 0, 0, 0, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 1, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0 } },
{ { { 0, 0, 0, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 1, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0 } },
{ { { 0, 0, 0, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0,
1, 0, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0,
1, 0, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 0, 0, 0, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0 } },
{ { 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 1, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 0, 0, 0, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0 } },
{ { 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 1, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 0, 0, 0, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0 } },
{ { 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 1, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 0, 0, 0, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0 } },
{ { 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 1, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 0, 0, 0, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0 } },
{ { 1, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 1, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 0, 0, 0, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0 } },
{ { 1, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 1, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 1, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0 } },
{ { { 0, 0, 0, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0 } },
{ { 1, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 1, 0, 1, 0, 0, 0, 0, 1, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 1, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0 } },
{ { { 0, 0, 0, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0 } },
{ { 1, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 1, 0, 1, 0, 0, 0, 0, 1, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0,
1, 0, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0,
1, 0, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0,
1, 0, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0,
1, 0, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0,
1, 0, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0,
1, 0, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0,
1, 0, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0,
1, 0, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0,
1, 0, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0,
1, 0, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0,
1, 0, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0,
1, 0, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0,
1, 0, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0,
1, 0, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0,
1, 0, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0,
1, 0, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 1, 0,
1, 0, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 1, 0,
1, 0, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 1, 0, 0, 0,
1, 0, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 1, 0, 0, 0,
1, 0, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 1, 0, 0, 0, 0,
1, 0, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 1, 0, 0, 0, 0,
1, 0, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 1, 0,
1, 0, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 1, 0,
1, 0, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 1, 0, 0, 0,
1, 0, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 1, 0, 0, 0,
1, 0, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 1, 0,
1, 0, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 1, 0,
1, 0, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 1, 0,
1, 0, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 1, 0,
1, 0, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 1, 0, 0, 0,
1, 0, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 1, 0, 0, 0,
1, 0, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 1, 0, 0, 0, 0,
1, 0, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 1, 0, 0, 0, 0,
1, 0, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 1, 0,
1, 0, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 1, 0,
1, 0, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 1, 0, 0, 0,
1, 0, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 1, 0, 0, 0,
1, 0, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 1, 0,
1, 0, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 1, 0,
1, 0, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0,
1, 0, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0,
1, 0, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0,
1, 0, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0,
1, 0, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0,
1, 0, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0,
1, 0, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 0, 0, 0, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 0, 0, 0, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 0, 0, 0, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 0, 0, 0, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 0, 0, 0, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 1, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 0, 0, 0, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 1, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 0, 0, 0, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 1, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 0, 0, 0, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 1, 0,
1, 0, 0, 0, 0, 0 } } } },
{ MN_pcmpgtq, 0x37, 2, SPACE_0F38, None,
{ 0, 0, 0, 1, 0, 0, 0, 0, 0, 0, 1, 1, 1, 1, 1, 0, 0, 0, 0, 0,
- 0, 0, 0, 1, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0, 1, 0, 0, 0, 0 },
+ 0, 0, 0, 1, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 },
{ { 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0,
1, 0, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
1, 0, 0, 0, 0, 0 } } } },
{ MN_pcmpgtq, 0x37, 2, SPACE_0F38, None,
{ 0, 0, 0, 1, 0, 0, 0, 0, 0, 0, 1, 1, 1, 1, 1, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 1, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0, 0, 0 },
+ 0, 0, 0, 0, 0, 0, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 },
{ { 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0,
1, 0, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 1, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0 } },
{ { { 0, 0, 0, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 1, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0 } },
{ { { 0, 0, 0, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 1, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0 } },
{ { { 0, 0, 0, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 1, 0, 1, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 1, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0 } },
{ { { 0, 0, 0, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 1, 0, 1, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 1, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0 } },
{ { { 0, 0, 0, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 1, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0 } },
{ { { 0, 0, 0, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 1, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0 } },
{ { { 0, 0, 0, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 1, 0, 1, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 1, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0 } },
{ { { 0, 0, 0, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 1, 0, 1, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 0, 0, 0, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 0, 0, 0, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 0, 0, 0, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 0, 0, 0, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 1, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 1, 1, 1, 0, 0, 0,
0, 0, 0, 0, 1, 0 } },
{ { 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 1, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0 } },
{ { { 1, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 1, 0, 1, 1, 0, 0, 0, 1, 0,
0, 0, 0, 0, 1, 0 } },
{ { 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 1, 0 } } } },
{ MN_xsave64, 0xae, 1, SPACE_0F, 4,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 1, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0 } },
{ { { 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 1, 0, 1, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 1, 0 } } } },
{ MN_xrstor, 0xae, 1, SPACE_0F, 5,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 1, 0 } } } },
{ MN_xrstor64, 0xae, 1, SPACE_0F, 5,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 1, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0 } },
{ { { 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 1, 0, 1, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 1, 0 } } } },
{ MN_xgetbv, 0x01d0, 0, SPACE_0F, None,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0 } } } },
{ MN_xsetbv, 0x01d1, 0, SPACE_0F, None,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0 } } } },
{ MN_xsaveopt, 0xae, 1, SPACE_0F, 6,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 1, 0 } } } },
{ MN_xsaveopt64, 0xae, 1, SPACE_0F, 6,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 1, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0 } },
{ { { 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 1, 0, 1, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 1, 0 } } } },
{ MN_aesdec, 0xde, 2, SPACE_0F38, None,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0,
1, 0, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0,
1, 0, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0,
1, 0, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0,
1, 0, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0,
1, 0, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0,
1, 0, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0,
1, 0, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0,
1, 0, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0,
1, 0, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0,
1, 0, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 0, 0, 0, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 0, 0, 0, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0, 0, 0,
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0,
0, 1, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0,
1, 0, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0, 0, 0,
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0,
1, 1, 1, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0, 0, 0,
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0,
0, 1, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0,
1, 0, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0, 0, 0,
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0,
1, 1, 1, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0, 0, 0,
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0,
0, 1, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0,
1, 0, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0, 0, 0,
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0,
1, 1, 1, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0, 0, 0,
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0,
0, 1, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0,
1, 0, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0, 0, 0,
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0,
1, 1, 1, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 0, 0, 0, 1, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 0, 0, 0, 1, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0,
1, 0, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0,
1, 0, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0,
1, 0, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0,
1, 0, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0,
1, 0, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0,
1, 0, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0,
1, 0, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0,
1, 0, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0, 0, 0, 0,
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 0, 0, 0, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0, 0, 0, 0,
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 0, 0, 0, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0, 0, 0, 0,
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 0, 0, 0, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0, 0, 0, 0,
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 0, 0, 0, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0, 0, 0, 0,
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0,
1, 0, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0, 0, 0, 0,
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0,
1, 0, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0,
1, 1, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 1, 0, 0, 0,
1, 1, 1, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0,
1, 1, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 1, 0,
1, 1, 1, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 1, 0, 0, 0,
1, 0, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 1, 0, 0, 0,
1, 0, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 1, 0,
1, 0, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 1, 0,
1, 0, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0,
1, 1, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0,
1, 1, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0,
1, 1, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 1, 0, 0, 0,
1, 1, 1, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0,
1, 1, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 1, 0,
1, 1, 1, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0,
1, 1, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 1, 0, 0, 0,
1, 1, 1, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0,
1, 1, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 1, 0,
1, 1, 1, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 0, 0, 0, 1, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 0, 0, 0, 1, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
1, 1, 0, 0, 0, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
1, 1, 0, 0, 0, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0,
1, 0, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 1, 0,
0, 0, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
1, 0, 0, 0, 0, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 1, 0,
1, 0, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 1, 0, 0, 0,
0, 0, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
1, 0, 0, 0, 0, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 1, 0, 0, 0,
1, 0, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0,
1, 1, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 1, 0, 0, 0,
1, 1, 1, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0,
1, 1, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 1, 0,
1, 1, 1, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0,
1, 1, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 1, 0, 0, 0,
1, 1, 1, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0,
1, 1, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 1, 0,
1, 1, 1, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0,
1, 1, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 1, 0, 0, 0,
1, 1, 1, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0,
1, 1, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 1, 0,
1, 1, 1, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0,
1, 1, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 1, 0, 0, 0,
1, 1, 1, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0,
1, 1, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 1, 0,
1, 1, 1, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0,
1, 1, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 1, 0, 0, 0,
1, 1, 1, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0,
1, 1, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 1, 0,
1, 1, 1, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0,
1, 1, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 1, 0, 0, 0,
1, 1, 1, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0,
1, 1, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 1, 0,
1, 1, 1, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0,
1, 1, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 1, 0, 0, 0,
1, 1, 1, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0,
1, 1, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 1, 0,
1, 1, 1, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0,
1, 1, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 1, 0, 0, 0,
1, 1, 1, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0,
1, 1, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 1, 0,
1, 1, 1, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0,
1, 1, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 1, 0, 0, 0,
1, 1, 1, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0,
1, 1, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 1, 0,
1, 1, 1, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0,
1, 1, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 1, 0, 0, 0,
1, 1, 1, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0,
1, 1, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 1, 0,
1, 1, 1, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0,
1, 1, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 1, 0, 0, 0,
1, 1, 1, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0,
1, 1, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 1, 0,
1, 1, 1, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0,
1, 1, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 1, 0, 0, 0,
1, 1, 1, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0,
1, 1, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 1, 0,
1, 1, 1, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0,
1, 1, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 1, 0, 0, 0,
1, 1, 1, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0,
1, 1, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 1, 0,
1, 1, 1, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0,
1, 1, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 1, 0, 0, 0,
1, 1, 1, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0,
1, 1, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 1, 0,
1, 1, 1, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0,
1, 1, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 1, 0, 0, 0,
1, 1, 1, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0,
1, 1, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 1, 0,
1, 1, 1, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0,
1, 1, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 1, 0, 0, 0,
1, 1, 1, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0,
1, 1, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 1, 0,
1, 1, 1, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0,
1, 1, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 1, 0, 0, 0,
1, 1, 1, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0,
1, 1, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 1, 0,
1, 1, 1, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0,
1, 1, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 1, 0, 0, 0,
1, 1, 1, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0,
1, 1, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 1, 0,
1, 1, 1, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0,
1, 1, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 1, 0, 0, 0,
1, 1, 1, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0,
1, 1, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 1, 0,
1, 1, 1, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0,
1, 1, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 1, 0, 0, 0,
1, 1, 1, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0,
1, 1, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 1, 0,
1, 1, 1, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0,
1, 1, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 1, 0, 0, 0,
1, 1, 1, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0,
1, 1, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 1, 0,
1, 1, 1, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0,
1, 1, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 1, 0, 0, 0,
1, 1, 1, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0,
1, 1, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 1, 0,
1, 1, 1, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0,
1, 1, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 1, 0, 0, 0,
1, 1, 1, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0,
1, 1, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 1, 0,
1, 1, 1, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0,
1, 1, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 1, 0, 0, 0,
1, 1, 1, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0,
1, 1, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 1, 0,
1, 1, 1, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0,
1, 1, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 1, 0, 0, 0,
1, 1, 1, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0,
1, 1, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 1, 0,
1, 1, 1, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0,
1, 1, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 1, 0, 0, 0,
1, 1, 1, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0,
1, 1, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 1, 0,
1, 1, 1, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0,
1, 1, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 1, 0, 0, 0,
1, 1, 1, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0,
1, 1, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 1, 0,
1, 1, 1, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0,
1, 1, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 1, 0, 0, 0,
1, 1, 1, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0,
1, 1, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 1, 0,
1, 1, 1, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0,
1, 1, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 1, 0, 0, 0,
1, 1, 1, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0,
1, 1, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 1, 0,
1, 1, 1, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0,
1, 1, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 1, 0, 0, 0,
1, 1, 1, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0,
1, 1, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 1, 0,
1, 1, 1, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0,
1, 1, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 1, 0, 0, 0,
1, 1, 1, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0,
1, 1, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 1, 0,
1, 1, 1, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0,
1, 1, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 1, 0, 0, 0,
1, 1, 1, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0,
1, 1, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 1, 0,
1, 1, 1, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0,
1, 1, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 1, 0, 0, 0,
1, 1, 1, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0,
1, 1, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 1, 0,
1, 1, 1, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0,
1, 1, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 1, 0, 0, 0,
1, 1, 1, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0,
1, 1, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 1, 0,
1, 1, 1, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0,
1, 1, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 1, 0, 0, 0,
1, 1, 1, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0,
1, 1, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 1, 0,
1, 1, 1, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0,
1, 1, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 1, 0, 0, 0,
1, 1, 1, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0,
1, 1, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 1, 0,
1, 1, 1, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0,
1, 1, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 1, 0, 0, 0,
1, 1, 1, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0,
1, 1, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 1, 0,
1, 1, 1, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0,
1, 1, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 1, 0, 0, 0,
1, 1, 1, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0,
1, 1, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 1, 0,
1, 1, 1, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0,
1, 1, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 1, 0, 0, 0,
1, 1, 1, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0,
1, 1, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 1, 0,
1, 1, 1, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0,
1, 1, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 1, 0, 0, 0,
1, 1, 1, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0,
1, 1, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 1, 0,
1, 1, 1, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0,
1, 1, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 1, 0, 0, 0,
1, 1, 1, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0,
1, 1, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 1, 0,
1, 1, 1, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0,
1, 1, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 1, 0, 0, 0,
1, 1, 1, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0,
1, 1, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 1, 0,
1, 1, 1, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0,
1, 1, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 1, 0, 0, 0,
1, 1, 1, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0,
1, 1, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 1, 0,
1, 1, 1, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0,
1, 1, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 1, 0, 0, 0,
1, 1, 1, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0,
1, 1, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 1, 0,
1, 1, 1, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0,
1, 1, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 1, 0, 0, 0,
1, 1, 1, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0,
1, 1, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 1, 0,
1, 1, 1, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0,
1, 1, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 1, 0, 0, 0,
1, 1, 1, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0,
1, 1, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 1, 0,
1, 1, 1, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 1, 0, 0, 0,
1, 0, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 1, 0, 0, 0,
1, 0, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 1, 0,
1, 0, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 1, 0,
1, 0, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 1, 0, 0, 0,
1, 0, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 1, 0, 0, 0,
1, 0, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 1, 0,
1, 0, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 1, 0,
1, 0, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 1, 0, 0, 0,
1, 0, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 1, 0, 0, 0,
1, 0, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 1, 0,
1, 0, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 1, 0,
1, 0, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 1, 0, 0, 0,
1, 0, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 1, 0, 0, 0,
1, 0, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 1, 0,
1, 0, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 1, 0,
1, 0, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 1, 0, 0, 0,
1, 0, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 1, 0, 0, 0,
1, 0, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 1, 0,
1, 0, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 1, 0,
1, 0, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 1, 0, 0, 0,
1, 0, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 1, 0, 0, 0,
1, 0, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 1, 0,
1, 0, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 1, 0,
1, 0, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 1, 0, 0, 0,
1, 0, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 1, 0, 0, 0,
1, 0, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 1, 0,
1, 0, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 1, 0,
1, 0, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 1, 0, 0, 0,
1, 0, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 1, 0, 0, 0,
1, 0, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 1, 0,
1, 0, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 1, 0,
1, 0, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 1, 0, 0, 0,
1, 0, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 1, 0, 0, 0,
1, 0, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 1, 0,
1, 0, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 1, 0,
1, 0, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 1, 0, 0, 0,
1, 0, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 1, 0, 0, 0,
1, 0, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 1, 0,
1, 0, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 1, 0,
1, 0, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 1, 0, 0, 0,
1, 0, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 1, 0, 0, 0,
1, 0, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 1, 0,
1, 0, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 1, 0,
1, 0, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 1, 0, 0, 0,
1, 0, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 1, 0, 0, 0,
1, 0, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 1, 0,
1, 0, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 1, 0,
1, 0, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 1, 0, 0, 0,
1, 0, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 1, 0, 0, 0,
1, 0, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 1, 0,
1, 0, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 1, 0,
1, 0, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 1, 0, 0, 0,
1, 0, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 1, 0, 0, 0,
1, 0, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 1, 0,
1, 0, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 1, 0,
1, 0, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 1, 0, 0, 0,
1, 0, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 1, 0, 0, 0,
1, 0, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 1, 0,
1, 0, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 1, 0,
1, 0, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 1, 0, 0, 0,
1, 0, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 1, 0, 0, 0,
1, 0, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 1, 0,
1, 0, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 1, 0,
1, 0, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 1, 0, 0, 0,
1, 0, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 1, 0, 0, 0,
1, 0, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 1, 0,
1, 0, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 1, 0,
1, 0, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 1, 0, 0, 0,
1, 0, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 1, 0, 0, 0,
1, 0, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 1, 0,
1, 0, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 1, 0,
1, 0, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 1, 0, 0, 0,
1, 0, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 1, 0, 0, 0,
1, 0, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 1, 0,
1, 0, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 1, 0,
1, 0, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 1, 0, 0, 0,
1, 0, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 1, 0, 0, 0,
1, 0, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 1, 0,
1, 0, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 1, 0,
1, 0, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 1, 0, 0, 0,
1, 0, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 1, 0, 0, 0,
1, 0, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 1, 0,
1, 0, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 1, 0,
1, 0, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 1, 0, 0, 0,
1, 0, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 1, 0, 0, 0,
1, 0, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 1, 0,
1, 0, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 1, 0,
1, 0, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 1, 0, 0, 0,
1, 0, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 1, 0, 0, 0,
1, 0, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 1, 0,
1, 0, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 1, 0,
1, 0, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 1, 0, 0, 0,
1, 0, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 1, 0, 0, 0,
1, 0, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 1, 0,
1, 0, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 1, 0,
1, 0, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 1, 0, 0, 0,
1, 0, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 1, 0, 0, 0,
1, 0, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 1, 0,
1, 0, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 1, 0,
1, 0, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 1, 0, 0, 0,
1, 0, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 1, 0, 0, 0,
1, 0, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 1, 0,
1, 0, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 1, 0,
1, 0, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 1, 0, 0, 0,
1, 0, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 1, 0, 0, 0,
1, 0, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 1, 0,
1, 0, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 1, 0,
1, 0, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 1, 0, 0, 0,
1, 0, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 1, 0, 0, 0,
1, 0, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 1, 0,
1, 0, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 1, 0,
1, 0, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 1, 0, 0, 0,
1, 0, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 1, 0, 0, 0,
1, 0, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 1, 0,
1, 0, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 1, 0,
1, 0, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 1, 0, 0, 0,
1, 0, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 1, 0, 0, 0,
1, 0, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 1, 0,
1, 0, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 1, 0,
1, 0, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 1, 0, 0, 0,
1, 0, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 1, 0, 0, 0,
1, 0, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 1, 0,
1, 0, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 1, 0,
1, 0, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 1, 0, 0, 0,
1, 0, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 1, 0, 0, 0,
1, 0, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 1, 0,
1, 0, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 1, 0,
1, 0, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 1, 0, 0, 0,
1, 0, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 1, 0, 0, 0,
1, 0, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 1, 0,
1, 0, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 1, 0,
1, 0, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 1, 0, 0, 0,
1, 0, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 1, 0, 0, 0,
1, 0, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 1, 0,
1, 0, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 1, 0,
1, 0, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 1, 0, 0, 0,
1, 0, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 1, 0, 0, 0,
1, 0, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 1, 0,
1, 0, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 1, 0,
1, 0, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 1, 0, 0, 0,
1, 0, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 1, 0, 0, 0,
1, 0, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 1, 0,
1, 0, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 1, 0,
1, 0, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 1, 0, 0, 0,
1, 0, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 1, 0, 0, 0,
1, 0, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 1, 0,
1, 0, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 1, 0,
1, 0, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 1, 0, 0, 0,
1, 0, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 1, 0, 0, 0,
1, 0, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 1, 0,
1, 0, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 1, 0,
1, 0, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 1, 0, 0, 0,
1, 0, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 1, 0, 0, 0,
1, 0, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 1, 0,
1, 0, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 1, 0,
1, 0, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 1, 0, 0, 0,
1, 0, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 1, 0, 0, 0,
1, 0, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 1, 0,
1, 0, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 1, 0,
1, 0, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 1, 0, 0, 0,
1, 0, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 1, 0, 0, 0,
1, 0, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 1, 0,
1, 0, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 1, 0,
1, 0, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 1, 0, 0, 0,
1, 0, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 1, 0, 0, 0,
1, 0, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 1, 0,
1, 0, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 1, 0,
1, 0, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 1, 0, 0, 0,
1, 0, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 1, 0, 0, 0,
1, 0, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 1, 0,
1, 0, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 1, 0,
1, 0, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 1, 0, 0, 0,
1, 0, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 1, 0, 0, 0,
1, 0, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 1, 0,
1, 0, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 1, 0,
1, 0, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 1, 0, 0, 0,
1, 0, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 1, 0, 0, 0,
1, 0, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 1, 0,
1, 0, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 1, 0,
1, 0, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 1, 0, 0, 0,
1, 0, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 1, 0, 0, 0,
1, 0, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 1, 0,
1, 0, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 1, 0,
1, 0, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 0, 0, 0, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 0, 0, 0, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 1, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 0, 0, 0, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 0, 0, 0, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 1, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 0, 0, 0, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 1, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 0, 0, 0, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 1, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 0, 0, 0, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 1, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 0, 0, 0, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 1, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 1, 0, 0, 0,
1, 0, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 1, 0, 0, 0,
1, 0, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 1, 0,
1, 0, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 1, 0,
1, 0, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 1, 0,
1, 0, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0,
1, 0, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 1, 0, 0, 0,
0, 1, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 1, 0, 1, 0,
1, 0, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 1, 0, 0, 0,
1, 0, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0,
1, 1, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 1, 0, 0, 0,
1, 1, 1, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0,
1, 1, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
1, 1, 0, 0, 0, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 1, 0,
0, 0, 1, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 1, 0,
1, 1, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 1, 0,
1, 1, 0, 0, 0, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0,
1, 0, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 1, 0,
1, 0, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0,
0, 1, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 1, 0,
0, 1, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0,
1, 1, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
1, 1, 0, 0, 0, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 1, 0,
0, 0, 1, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 1, 0,
1, 1, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 1, 0,
1, 1, 0, 0, 0, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0,
1, 0, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 1, 0,
1, 0, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0,
0, 1, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 1, 0,
0, 1, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0,
1, 1, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 1, 0, 0, 0,
1, 1, 1, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 1, 0,
1, 0, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0,
1, 0, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 1, 0, 0, 0,
0, 1, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 1, 0, 1, 0,
1, 0, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 1, 0, 0, 0,
1, 0, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 1, 0, 0, 0,
1, 0, 0, 0, 1, 0 } },
{ { 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 1, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 1, 0, 0, 0,
1, 0, 0, 0, 1, 0 } },
{ { 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 1, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 1, 0,
1, 0, 0, 0, 1, 0 } },
{ { 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 1, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 1, 0,
1, 0, 0, 0, 1, 0 } },
{ { 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 1, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 1, 0,
1, 0, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 1, 0,
1, 0, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 1, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 1, 0, 1, 0,
0, 0, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 1, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 1, 0, 1, 0,
0, 0, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 1, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 1, 0, 1, 0,
0, 0, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 1, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 1, 0, 1, 0,
0, 0, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 1, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 1, 0, 1, 0,
0, 0, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 1, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 1, 0, 1, 0,
0, 0, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 1, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 1, 0, 0, 0,
0, 0, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 1, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 1, 0,
0, 0, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 1, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 1, 0, 0, 0,
0, 0, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 1, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 1, 0,
0, 0, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 1, 0, 0, 0,
1, 0, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 1, 0, 0, 0,
1, 0, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0,
1, 1, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
1, 1, 0, 0, 0, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 1, 0,
0, 0, 1, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 1, 0,
1, 1, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 1, 0,
1, 1, 0, 0, 0, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0,
1, 0, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 1, 0,
1, 0, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0,
0, 1, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 1, 0,
0, 1, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0,
1, 1, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 1, 0, 0, 0,
1, 1, 1, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 1, 0, 0, 0,
1, 0, 0, 0, 1, 0 } },
{ { 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 1, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 1, 0, 0, 0,
1, 0, 0, 0, 1, 0 } },
{ { 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 1, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 1, 0,
1, 0, 0, 0, 1, 0 } },
{ { 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 1, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 1, 0,
1, 0, 0, 0, 1, 0 } },
{ { 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 1, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0,
1, 1, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 1, 0, 0, 0,
1, 1, 1, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0,
1, 1, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 1, 0,
1, 1, 1, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 1, 0, 0, 0,
1, 0, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 1, 0, 0, 0,
1, 0, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 1, 0,
1, 0, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 1, 0,
1, 0, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 0, 0, 0, 1, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 0, 0, 0, 1, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 0, 0, 0, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 0, 0, 0, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 1, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0 } },
{ { { 0, 0, 0, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 0, 0, 0, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 1, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0 } },
{ { { 0, 0, 0, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0,
1, 1, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0,
1, 1, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0,
1, 1, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0,
1, 1, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 0, 0, 0, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 0, 0, 0, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 1, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 0, 0, 0, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 1, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0,
1, 1, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 1, 0, 0, 0,
0, 0, 0, 0, 1, 0 } } } },
{ MN_vmaskmovdqu, 0xf7, 2, SPACE_0F, None,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
1, 0, 0, 0, 0, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
1, 1, 0, 0, 0, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0,
1, 1, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
1, 1, 0, 0, 0, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0,
1, 1, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0,
1, 1, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 1, 0, 0, 0,
1, 1, 1, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0,
1, 1, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 1, 0,
1, 1, 1, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 1, 0, 0, 0,
1, 0, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 1, 0, 0, 0,
1, 0, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 1, 0,
1, 0, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 1, 0,
1, 0, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0,
1, 1, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 1, 0, 0, 0,
1, 1, 1, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0,
1, 1, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 1, 0,
1, 1, 1, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 1, 0, 0, 0,
1, 0, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 1, 0, 0, 0,
1, 0, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 1, 0,
1, 0, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 1, 0,
1, 0, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0,
1, 1, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0,
1, 1, 1, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0,
1, 1, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0,
1, 1, 1, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 1, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 1, 0, 0, 0,
0, 0, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 1, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
1, 0, 0, 0, 0, 0 } },
{ { 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 1, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 1, 0, 0, 0,
0, 0, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 1, 0,
1, 0, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0,
0, 1, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0,
0, 1, 1, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 1, 0,
1, 0, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0,
1, 1, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0,
1, 1, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
1, 0, 0, 0, 0, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
1, 0, 0, 0, 0, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 1, 0,
0, 0, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
1, 0, 0, 0, 0, 0 } },
{ { 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 1, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 1, 0,
0, 0, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
1, 0, 0, 0, 0, 0 } },
{ { 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 1, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 1, 0,
0, 0, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
1, 0, 0, 0, 0, 0 } },
{ { 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 1, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 1, 0,
0, 0, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
1, 0, 0, 0, 0, 0 } },
{ { 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 1, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
1, 0, 0, 0, 0, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
1, 0, 0, 0, 0, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 1, 0,
0, 0, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
1, 0, 0, 0, 0, 0 } },
{ { 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 1, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 1, 0,
0, 0, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
1, 0, 0, 0, 0, 0 } },
{ { 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 1, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 1, 0,
0, 0, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
1, 0, 0, 0, 0, 0 } },
{ { 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 1, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 1, 0,
0, 0, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
1, 0, 0, 0, 0, 0 } },
{ { 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 1, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
1, 1, 0, 0, 0, 0 } },
{ { 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 1, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
1, 1, 0, 0, 0, 0 } },
{ { 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 1, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
1, 1, 0, 0, 0, 0 } },
{ { 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
1, 1, 1, 0, 0, 0 } },
{ { 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0,
1, 1, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0,
1, 1, 1, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
1, 1, 0, 0, 0, 0 } },
{ { 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
1, 1, 1, 0, 0, 0 } },
{ { 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
1, 1, 0, 0, 0, 0 } },
{ { 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
1, 1, 1, 0, 0, 0 } },
{ { 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 1, 0,
1, 0, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
1, 0, 0, 0, 0, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 1, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 1, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0 } },
{ { { 1, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 1, 0, 1, 0, 0, 0, 0, 1, 0,
0, 0, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 1, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0 } },
{ { { 1, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 1, 0, 1, 0, 0, 0, 0, 1, 0,
0, 0, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 1, 0,
1, 0, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
1, 0, 0, 0, 0, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 1, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 1, 0, 0, 0,
0, 0, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
1, 0, 0, 0, 0, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 1, 0, 0, 0,
0, 0, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
1, 0, 0, 0, 0, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 1, 0,
0, 0, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
1, 0, 0, 0, 0, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 1, 0,
0, 0, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
1, 0, 0, 0, 0, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0,
1, 1, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0,
1, 1, 1, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0,
1, 1, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0,
1, 1, 1, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0,
1, 1, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0,
1, 1, 1, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0,
1, 1, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0,
1, 1, 1, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 0, 0, 0, 1, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0,
1, 1, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 1, 0, 0, 0,
1, 1, 1, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0,
1, 1, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 1, 0,
1, 1, 1, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 1, 0, 0, 0,
1, 0, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 1, 0, 0, 0,
1, 0, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 1, 0,
1, 0, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 1, 0,
1, 0, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0,
1, 1, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 1, 0, 0, 0,
1, 1, 1, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0,
1, 1, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 1, 0,
1, 1, 1, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0,
1, 1, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0,
1, 1, 1, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0,
1, 1, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0,
1, 1, 1, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0,
1, 1, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 1, 0, 0, 0,
1, 1, 1, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0,
1, 1, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 1, 0, 0, 0,
1, 1, 1, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0,
1, 1, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0,
1, 1, 1, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0,
1, 1, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 1, 0, 0, 0,
1, 1, 1, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0,
1, 1, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0,
1, 1, 1, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0,
1, 1, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0,
1, 1, 1, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0,
1, 1, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0,
1, 1, 1, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0,
1, 1, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0,
1, 1, 1, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0,
1, 1, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0,
1, 1, 1, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0,
1, 1, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 1, 0, 0, 0,
1, 1, 1, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0,
1, 1, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 1, 0,
1, 1, 1, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0,
1, 1, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0,
1, 1, 1, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0,
1, 1, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0,
1, 1, 1, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 0, 0, 0, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 0, 0, 0, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0,
1, 1, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0,
1, 1, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0,
1, 1, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0,
1, 1, 1, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0,
1, 1, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0,
1, 1, 1, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
1, 1, 0, 0, 0, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 0, 0, 0, 1, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0,
1, 1, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0,
1, 1, 1, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0,
1, 1, 1, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0,
1, 1, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0,
1, 1, 1, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0,
1, 1, 1, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0,
1, 1, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 1, 0, 0, 0,
1, 1, 1, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 1, 0, 0, 0,
1, 1, 1, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0 } } } },
{ MN_vpcmpeqq, 0x29, 3, SPACE_0F38, None,
{ 0, 0, 0, 1, 0, 0, 0, 1, 0, 0, 1, 1, 1, 1, 1, 0, 0, 0, 0, 0,
- 0, 0, 0, 1, 1, 3, 1, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0, 0, 0 },
+ 0, 0, 0, 1, 1, 3, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 },
{ { 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0,
1, 1, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 1, 0,
1, 1, 1, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 1, 0,
1, 1, 1, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 1, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0 } },
{ { { 0, 0, 0, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 1, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0 } },
{ { { 0, 0, 0, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 1, 0, 1, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 1, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0 } },
{ { { 0, 0, 0, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 1, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0 } },
{ { { 0, 0, 0, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 1, 0, 1, 0, 0, 0, 0, 0, 0,
1, 0, 0, 0, 0, 0 } } } },
{ MN_vpcmpgtb, 0x64 | 0, 3, SPACE_0F, None,
{ 0, 0, 0, 1, 0, 0, 0, 1, 0, 0, 1, 1, 1, 1, 1, 0, 0, 0, 0, 0,
- 0, 0, 0, 1, 1, 3, 1, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0, 0, 0 },
+ 0, 0, 0, 1, 1, 3, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 },
{ { 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0,
1, 1, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0,
1, 1, 1, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0 } } } },
{ MN_vpcmpgtw, 0x64 | 1, 3, SPACE_0F, None,
{ 0, 0, 0, 1, 0, 0, 0, 1, 0, 0, 1, 1, 1, 1, 1, 0, 0, 0, 0, 0,
- 0, 0, 0, 1, 1, 3, 1, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0, 0, 0 },
+ 0, 0, 0, 1, 1, 3, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 },
{ { 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0,
1, 1, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0,
1, 1, 1, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0 } } } },
{ MN_vpcmpgtd, 0x66, 3, SPACE_0F, None,
{ 0, 0, 0, 1, 0, 0, 0, 1, 0, 0, 1, 1, 1, 1, 1, 0, 0, 0, 0, 0,
- 0, 0, 0, 1, 1, 3, 1, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0, 0, 0 },
+ 0, 0, 0, 1, 1, 3, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 },
{ { 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0,
1, 1, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 1, 0, 0, 0,
1, 1, 1, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0 } } } },
{ MN_vpcmpgtq, 0x37, 3, SPACE_0F38, None,
{ 0, 0, 0, 1, 0, 0, 0, 1, 0, 0, 1, 1, 1, 1, 1, 0, 0, 0, 0, 0,
- 0, 0, 0, 1, 1, 3, 1, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0, 0, 0 },
+ 0, 0, 0, 1, 1, 3, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 },
{ { 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0,
1, 1, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 1, 0,
1, 1, 1, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 0, 0, 0, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 0, 0, 0, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 0, 0, 0, 1, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0,
1, 1, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 0, 0, 0, 1, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 0, 0, 0, 1, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 1, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 1, 0, 0, 0,
1, 1, 1, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0,
1, 1, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 0, 0, 0, 1, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 0, 0, 0, 1, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 1, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 1, 0,
1, 1, 1, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 0, 0, 0, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 0, 0, 0, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 1, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0 } },
{ { { 0, 0, 0, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 1, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0 } },
{ { { 0, 0, 0, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 0, 0, 0, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 0, 0, 0, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 0, 0, 0, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 0, 0, 0, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 0, 0, 0, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 0, 0, 0, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 0, 0, 0, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 0, 0, 0, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 0, 0, 0, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 0, 0, 0, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0,
1, 1, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0,
1, 1, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0,
1, 1, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0,
1, 0, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0,
1, 1, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0,
1, 1, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0,
1, 1, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 0, 0, 0, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0 } },
{ { 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 1, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 0, 0, 0, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0 } },
{ { 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 1, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 0, 0, 0, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0 } },
{ { 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 1, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 0, 0, 0, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0 } },
{ { 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 1, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 0, 0, 0, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0 } },
{ { 1, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 1, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 0, 0, 0, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0 } },
{ { 1, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 1, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 1, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0 } },
{ { { 0, 0, 0, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0 } },
{ { 1, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 1, 0, 1, 0, 0, 0, 0, 1, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 1, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0 } },
{ { { 0, 0, 0, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0 } },
{ { 1, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 1, 0, 1, 0, 0, 0, 0, 1, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 0, 0, 0, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0 } },
{ { 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 1, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 0, 0, 0, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0 } },
{ { 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 1, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 0, 0, 0, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0 } },
{ { 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 1, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 0, 0, 0, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0 } },
{ { 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 1, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0,
1, 1, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0,
1, 1, 1, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0,
1, 1, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0,
1, 1, 1, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0,
1, 1, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0,
1, 1, 1, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0,
1, 1, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 1, 0, 0, 0,
1, 1, 1, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0,
1, 1, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0,
1, 1, 1, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0,
1, 1, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0,
1, 1, 1, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0,
1, 1, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 1, 0, 0, 0,
1, 1, 1, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0,
1, 1, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0,
1, 1, 1, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0,
1, 1, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0,
1, 1, 1, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0,
1, 1, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 1, 0, 0, 0,
1, 1, 1, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0,
1, 1, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0,
1, 1, 1, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0,
1, 1, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0,
1, 1, 1, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0,
1, 1, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 1, 0, 0, 0,
1, 1, 1, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0,
1, 1, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0,
1, 1, 1, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
1, 1, 0, 0, 0, 0 } },
{ { 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 1, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 1, 0, 0, 0,
1, 0, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 1, 0,
1, 0, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0,
1, 0, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 1, 0, 0, 0,
1, 0, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 1, 0,
1, 0, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 1, 0, 0, 0, 0,
1, 0, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 1, 0, 0, 0,
1, 0, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 1, 0,
1, 0, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 1, 0, 0, 0, 0,
1, 0, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 1, 0, 0, 0,
1, 0, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 1, 0,
1, 0, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0,
1, 0, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0,
0, 1, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 1, 0,
1, 0, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0,
1, 0, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 1, 0,
1, 0, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0,
1, 0, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0,
0, 1, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 1, 0,
1, 0, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0,
1, 0, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 1, 0,
1, 0, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0,
1, 0, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0,
0, 1, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 1, 0,
1, 0, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0,
1, 0, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 1, 0, 0, 0,
1, 0, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 1, 0,
1, 0, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0,
1, 0, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 1, 0, 0, 0,
1, 0, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 1, 0,
1, 0, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 1, 0, 0, 0,
1, 0, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 1, 0,
1, 0, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0,
1, 0, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 1, 0, 0, 0,
1, 0, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 1, 0,
1, 0, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 1, 0, 0, 0, 0,
1, 0, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 1, 0, 0, 0,
1, 0, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 1, 0,
1, 0, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 1, 0, 0, 0, 0,
1, 0, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 1, 0, 0, 0,
1, 0, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 1, 0,
1, 0, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0,
1, 0, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0,
0, 1, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 1, 0,
1, 0, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0,
1, 0, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 1, 0,
1, 0, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0,
1, 0, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0,
0, 1, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 1, 0,
1, 0, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0,
1, 0, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 1, 0,
1, 0, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0,
1, 0, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0,
0, 1, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 1, 0,
1, 0, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0,
1, 0, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 1, 0, 0, 0,
1, 0, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 1, 0,
1, 0, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0,
1, 0, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 1, 0, 0, 0,
1, 0, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 1, 0,
1, 0, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0,
1, 1, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 1, 0,
1, 1, 1, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0,
1, 1, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0,
1, 1, 1, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0,
1, 1, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0,
1, 1, 1, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0,
1, 1, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0,
1, 1, 1, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0,
1, 1, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 1, 0, 0, 0,
1, 1, 1, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0,
1, 1, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0,
1, 1, 1, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0,
1, 1, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 1, 0,
1, 1, 1, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0,
1, 1, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0,
1, 1, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0,
1, 1, 1, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0,
1, 1, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0,
1, 1, 1, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 0, 0, 0, 1, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 0, 0, 0, 1, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 1, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 0, 0, 0, 1, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 0, 0, 0, 1, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 0, 0, 0, 1, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 0, 0, 0, 1, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0,
1, 1, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0,
1, 1, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0,
1, 1, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 0, 0, 0, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0,
1, 0, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0,
1, 0, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 0, 0, 0, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 1, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 0, 0, 0, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0,
1, 0, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0,
1, 0, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 0, 0, 0, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 1, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 0, 0, 0, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 0, 0, 0, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 0, 0, 0, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0,
1, 0, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 0, 0, 0, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0,
1, 0, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 0, 0, 0, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0,
1, 0, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0,
1, 0, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 0, 0, 0, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 1, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 0, 0, 0, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0,
1, 0, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 0, 0, 0, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0,
1, 0, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 0, 0, 0, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0,
1, 0, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0,
1, 0, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 0, 0, 0, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 1, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 0, 0, 0, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0,
1, 0, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0,
1, 0, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 0, 0, 0, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 1, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 0, 0, 0, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 0, 0, 0, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 0, 0, 0, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0,
1, 0, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 0, 0, 0, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0,
1, 0, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0,
1, 1, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0,
1, 1, 1, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0,
1, 1, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0,
1, 1, 1, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0,
1, 1, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 1, 0, 0, 0,
1, 1, 1, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0,
1, 1, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 1, 0,
1, 1, 1, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0,
1, 1, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0,
1, 1, 1, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0,
1, 1, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0,
1, 1, 1, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0,
1, 1, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0,
1, 1, 1, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0,
1, 1, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0,
1, 1, 1, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0,
1, 1, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0,
1, 1, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0,
1, 1, 1, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0,
1, 1, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 1, 0, 0, 0,
1, 1, 1, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0,
1, 1, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 1, 0,
1, 1, 1, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0,
1, 1, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0,
1, 1, 1, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0,
1, 1, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0,
1, 1, 1, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0,
1, 1, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 1, 0, 0, 0,
1, 1, 1, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0,
1, 1, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 1, 0,
1, 1, 1, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0,
1, 1, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0,
1, 1, 1, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0,
1, 1, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0,
1, 1, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 1, 0, 0, 0,
1, 0, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 0, 0, 0, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 0, 0, 0, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 0, 0, 0, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 1, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 0, 0, 0, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 1, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0,
1, 1, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 1, 0, 0, 0,
1, 0, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 0, 0, 0, 1, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 0, 0, 0, 1, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 1, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 0, 0, 0, 1, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 0, 0, 0, 1, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 1, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0,
1, 1, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 1, 0, 0, 0,
1, 1, 1, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0,
1, 1, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 1, 0,
1, 1, 1, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 1, 0, 0, 0,
1, 0, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 1, 0, 0, 0,
1, 0, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 1, 0,
1, 0, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 1, 0,
1, 0, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 1, 0, 0, 0,
0, 0, 0, 0, 1, 0 } } } },
{ MN_vsubps, 0x5c, 3, SPACE_0F, None,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0,
1, 1, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 1, 0, 0, 0,
1, 1, 1, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0,
1, 1, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 1, 0,
1, 1, 1, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 1, 0, 0, 0,
1, 0, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 1, 0, 0, 0,
1, 0, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 1, 0,
1, 0, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 1, 0,
1, 0, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0,
1, 1, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0,
1, 1, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 1, 0, 0, 0,
1, 0, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 1, 0, 0, 0,
1, 0, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 1, 0,
1, 0, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 1, 0,
1, 0, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0,
1, 1, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 1, 0, 0, 0,
1, 1, 1, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0,
1, 1, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 1, 0,
1, 1, 1, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0,
1, 1, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 1, 0, 0, 0,
1, 1, 1, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0,
1, 1, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 1, 0,
1, 1, 1, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0,
1, 1, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 1, 0, 0, 0,
1, 1, 1, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0,
1, 1, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 1, 0,
1, 1, 1, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0 } } } },
{ MN_vzeroupper, 0x77, 0, SPACE_0F, None,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0 } } } },
{ MN_vbroadcasti128, 0x5a, 2, SPACE_0F38, None,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0,
1, 0, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 0, 0, 0, 1, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 1, 0, 0, 0, 0, 0,
1, 0, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 1, 0, 0, 0, 0, 0,
1, 0, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0, 0,
0, 0, 0, 0, 0, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 1, 0, 0, 0, 0,
1, 0, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 1, 0, 0, 0, 0,
1, 0, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0, 0,
0, 0, 0, 0, 0, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
1, 1, 1, 0, 0, 0 } } } },
{ MN_vpbroadcastd, 0x58 | 0, 2, SPACE_0F38, None,
{ 0, 0, 0, 1, 0, 0, 0, 0, 0, 0, 1, 1, 1, 1, 1, 0, 0, 0, 0, 0,
- 0, 0, 0, 1, 0, 1, 1, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0, 0, 0 },
+ 0, 0, 0, 1, 0, 1, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 },
{ { 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 1, 0, 0, 0,
1, 0, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 1, 0, 0, 0,
1, 0, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0, 0,
0, 0, 0, 0, 0, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
1, 1, 1, 0, 0, 0 } } } },
{ MN_vpbroadcastq, 0x58 | 1, 2, SPACE_0F38, None,
{ 0, 0, 0, 1, 0, 0, 0, 0, 0, 0, 1, 1, 1, 1, 1, 0, 0, 0, 0, 0,
- 0, 0, 0, 1, 0, 1, 1, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0, 0, 0 },
+ 0, 0, 0, 1, 0, 1, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 },
{ { 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 1, 0,
1, 0, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 1, 0,
1, 0, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0,
0, 0, 0, 0, 0, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 0, 0, 0, 1, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0,
0, 1, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 1, 0, 0, 0,
0, 1, 1, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 0, 0, 0, 1, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 0, 0, 0, 1, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 1, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 1, 0,
0, 1, 1, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0,
0, 1, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 1, 0, 0, 0,
0, 1, 1, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 0, 0, 0, 1, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 0, 0, 0, 1, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 1, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 1, 0,
0, 1, 1, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 0, 0, 0, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 0, 0, 0, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
1, 1, 0, 0, 0, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0,
1, 1, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
1, 1, 0, 0, 0, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0,
1, 1, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0,
1, 1, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 1, 0, 0, 0,
1, 1, 1, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0,
1, 1, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 1, 0,
1, 1, 1, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0,
1, 1, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 1, 0, 0, 0,
1, 1, 1, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0,
1, 1, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 1, 0, 0, 0,
1, 1, 1, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0,
1, 1, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 1, 0,
1, 1, 1, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
1, 1, 0, 0, 0, 0 } },
{ { 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 1, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 1, 0,
0, 0, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 1, 0,
0, 0, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
1, 0, 0, 0, 0, 0 } },
{ { 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 1, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 1, 0, 0, 0, 0 } },
{ { 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 1, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 1, 0, 0, 0,
0, 0, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 1, 0, 0, 0,
0, 0, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 1, 0, 0, 0,
0, 0, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
1, 0, 0, 0, 0, 0 } },
{ { 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 1, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
1, 0, 0, 0, 0, 0 } },
{ { 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 1, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 1, 0, 0, 0,
0, 0, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 1, 0, 0, 0,
0, 0, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 1, 0, 0, 0,
0, 0, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
1, 0, 0, 0, 0, 0 } },
{ { 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 1, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 1, 0, 0, 0, 0 } },
{ { 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 1, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 1, 0,
0, 0, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 1, 0,
0, 0, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 1, 0,
0, 0, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
1, 0, 0, 0, 0, 0 } },
{ { 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 1, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 1, 0, 0, 0, 0 } },
{ { 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 1, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 1, 0, 0, 0,
0, 0, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 1, 0, 0, 0,
0, 0, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 1, 0, 0, 0,
0, 0, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
1, 1, 0, 0, 0, 0 } },
{ { 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 1, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 1, 0,
0, 0, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 1, 0,
0, 0, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
1, 0, 0, 0, 0, 0 } },
{ { 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 1, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
1, 0, 0, 0, 0, 0 } },
{ { 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 1, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 1, 0, 0, 0,
0, 0, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 1, 0, 0, 0,
0, 0, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 1, 0, 0, 0,
0, 0, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
1, 0, 0, 0, 0, 0 } },
{ { 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 1, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 1, 0, 0, 0, 0 } },
{ { 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 1, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 1, 0,
0, 0, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 1, 0,
0, 0, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 1, 0,
0, 0, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0,
1, 0, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 0, 0, 0, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 0, 0, 0, 1, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0, 0,
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 0, 0, 0, 1, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0, 0,
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 0, 0, 0, 1, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0,
1, 0, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0, 0,
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0,
0, 1, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0, 0,
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0,
1, 1, 1, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0,
1, 0, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0, 0,
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0,
0, 1, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0, 0,
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0,
1, 1, 1, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0,
1, 0, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0, 0,
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0,
0, 1, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0, 0,
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0,
1, 1, 1, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0,
1, 0, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0, 0,
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0,
0, 1, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0, 0,
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0,
1, 1, 1, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0, 0, 0, 0,
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 0, 0, 0, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0, 0, 0, 0,
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 0, 0, 0, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 1, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0, 0, 0, 0,
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 0, 0, 0, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0, 0, 0, 0,
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 0, 0, 0, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 1, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0, 0, 0, 0,
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0,
1, 1, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0, 0, 0, 0,
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0,
1, 1, 1, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 1, 0,
0, 0, 0, 0, 0, 0 } } } },
{ MN_rdgsbase, 0xae, 1, SPACE_0F, 1,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 1, 0,
0, 0, 0, 0, 0, 0 } } } },
{ MN_rdrand, 0xc7, 1, SPACE_0F, 6,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 0, 1, 0,
0, 0, 0, 0, 0, 0 } } } },
{ MN_wrfsbase, 0xae, 1, SPACE_0F, 2,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 1, 0,
0, 0, 0, 0, 0, 0 } } } },
{ MN_wrgsbase, 0xae, 1, SPACE_0F, 3,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 1, 0,
0, 0, 0, 0, 0, 0 } } } },
{ MN_vcvtph2ps, 0x13, 2, SPACE_0F38, None,
1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 1, 0,
1, 0, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0,
1, 0, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0,
0, 1, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 1, 0,
1, 0, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0,
1, 0, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 0, 0, 0, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 0, 0, 0, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 0, 0, 0, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 0, 0, 0, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 0, 0, 0, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0,
1, 1, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 1, 0, 0, 0,
1, 1, 1, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0,
1, 1, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 1, 0,
1, 1, 1, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0,
1, 1, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 1, 0, 0, 0,
1, 1, 1, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0,
1, 1, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 1, 0,
1, 1, 1, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0,
1, 1, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 1, 0, 0, 0,
1, 1, 1, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0,
1, 1, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 1, 0,
1, 1, 1, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 1, 0, 0, 0,
1, 0, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 1, 0, 0, 0,
1, 0, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 1, 0,
1, 0, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 1, 0,
1, 0, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 1, 0, 0, 0,
1, 0, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 1, 0, 0, 0,
1, 0, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 1, 0,
1, 0, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 1, 0,
1, 0, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 1, 0, 0, 0,
1, 0, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 1, 0, 0, 0,
1, 0, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 1, 0,
1, 0, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 1, 0,
1, 0, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0,
1, 1, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 1, 0, 0, 0,
1, 1, 1, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0,
1, 1, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 1, 0,
1, 1, 1, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0,
1, 1, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 1, 0, 0, 0,
1, 1, 1, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0,
1, 1, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 1, 0,
1, 1, 1, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0,
1, 1, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 1, 0, 0, 0,
1, 1, 1, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0,
1, 1, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 1, 0,
1, 1, 1, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0,
1, 1, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 1, 0, 0, 0,
1, 1, 1, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0,
1, 1, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 1, 0,
1, 1, 1, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0,
1, 1, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 1, 0, 0, 0,
1, 1, 1, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0,
1, 1, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 1, 0,
1, 1, 1, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0,
1, 1, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 1, 0, 0, 0,
1, 1, 1, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0,
1, 1, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 1, 0,
1, 1, 1, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 1, 0, 0, 0,
1, 0, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 1, 0, 0, 0,
1, 0, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 1, 0,
1, 0, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 1, 0,
1, 0, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 1, 0, 0, 0,
1, 0, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 1, 0, 0, 0,
1, 0, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 1, 0,
1, 0, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 1, 0,
1, 0, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 1, 0, 0, 0,
1, 0, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 1, 0, 0, 0,
1, 0, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 1, 0,
1, 0, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 1, 0,
1, 0, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0,
1, 1, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 1, 0, 0, 0,
1, 1, 1, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0,
1, 1, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 1, 0,
1, 1, 1, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0,
1, 1, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 1, 0, 0, 0,
1, 1, 1, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0,
1, 1, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 1, 0,
1, 1, 1, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0,
1, 1, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 1, 0, 0, 0,
1, 1, 1, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0,
1, 1, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 1, 0,
1, 1, 1, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0,
1, 1, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 1, 0, 0, 0,
1, 1, 1, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0,
1, 1, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 1, 0,
1, 1, 1, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0,
1, 1, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 1, 0, 0, 0,
1, 1, 1, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0,
1, 1, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 1, 0,
1, 1, 1, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0,
1, 1, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 1, 0, 0, 0,
1, 1, 1, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0,
1, 1, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 1, 0,
1, 1, 1, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 1, 0, 0, 0,
1, 0, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 1, 0, 0, 0,
1, 0, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 1, 0,
1, 0, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 1, 0,
1, 0, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 1, 0, 0, 0,
1, 0, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 1, 0, 0, 0,
1, 0, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 1, 0,
1, 0, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 1, 0,
1, 0, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 1, 0, 0, 0,
1, 0, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 1, 0, 0, 0,
1, 0, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 1, 0,
1, 0, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 1, 0,
1, 0, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0,
1, 1, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 1, 0, 0, 0,
1, 1, 1, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0,
1, 1, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 1, 0,
1, 1, 1, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0,
1, 1, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 1, 0, 0, 0,
1, 1, 1, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0,
1, 1, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 1, 0,
1, 1, 1, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0,
1, 1, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 1, 0, 0, 0,
1, 1, 1, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0,
1, 1, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 1, 0,
1, 1, 1, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 1, 0, 0, 0,
1, 0, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 1, 0, 0, 0,
1, 0, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 1, 0,
1, 0, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 1, 0,
1, 0, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 1, 0, 0, 0,
1, 0, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 1, 0, 0, 0,
1, 0, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 1, 0,
1, 0, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 1, 0,
1, 0, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 1, 0, 0, 0,
1, 0, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 1, 0, 0, 0,
1, 0, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 1, 0,
1, 0, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 1, 0,
1, 0, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0 } } } },
{ MN_xrelease, 0xf3, 0, SPACE_BASE, None,
0, 0, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0 } } } },
{ MN_xabort, 0xc6f8, 1, SPACE_BASE, None,
0, 0, 0, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 0, 0, 0, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0 } } } },
{ MN_xbegin, 0xc7f8, 1, SPACE_BASE, None,
0, 0, 0, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0 } } } },
{ MN_xend, 0x01d5, 0, SPACE_0F, None,
0, 0, 0, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0 } } } },
{ MN_xtest, 0x01d6, 0, SPACE_0F, None,
0, 0, 1, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0 } } } },
{ MN_bzhi, 0xf5, 3, SPACE_0F38, None,
0, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 1, 0,
0, 0, 0, 0, 0, 0 } },
{ { 1, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 1, 0, 1, 0,
0, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 1, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 1, 0, 1, 0,
0, 0, 0, 0, 1, 0 } },
{ { 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 1, 0,
0, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 1, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 1, 0, 1, 0,
0, 0, 0, 0, 1, 0 } },
{ { 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 1, 0,
0, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 1, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 1, 0, 1, 0,
0, 0, 0, 0, 1, 0 } },
{ { 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 1, 0,
0, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 0, 0, 0, 1, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0 } },
{ { 1, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 1, 0, 1, 0,
0, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 1, 0,
0, 0, 0, 0, 0, 0 } },
{ { 1, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 1, 0, 1, 0,
0, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 1, 0,
0, 0, 0, 0, 0, 0 } },
{ { 1, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 1, 0, 1, 0,
0, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 1, 0,
0, 0, 0, 0, 0, 0 } },
{ { 1, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 1, 0, 1, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0,
1, 1, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0,
1, 1, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 1, 0, 0, 0,
1, 0, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 1, 0,
1, 0, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0,
1, 1, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0,
1, 1, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0,
1, 1, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0,
1, 1, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0,
1, 1, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0,
1, 1, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 1, 0, 0, 0,
1, 0, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 1, 0,
1, 0, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0,
1, 1, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0,
1, 1, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 1, 0, 0, 0,
1, 0, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 1, 0,
1, 0, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0,
1, 1, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0,
1, 1, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 1, 0, 0, 0,
1, 0, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 1, 0,
1, 0, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0,
1, 1, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0,
1, 1, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 1, 0, 0, 0,
1, 0, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 1, 0,
1, 0, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
1, 1, 0, 0, 0, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 0, 0, 0, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 0, 0, 0, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 0, 0, 0, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 0, 0, 0, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 0, 0, 0, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 0, 0, 0, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 0, 0, 0, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 0, 0, 0, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0,
1, 0, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0,
1, 0, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0,
1, 0, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0,
1, 0, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0,
1, 0, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0,
1, 0, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0,
1, 0, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0,
1, 0, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0,
1, 0, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0,
1, 0, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0,
1, 0, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0,
1, 0, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0,
1, 0, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0,
1, 0, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0,
1, 0, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0,
1, 0, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0,
1, 0, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0,
1, 0, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0,
1, 0, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0,
1, 0, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0,
1, 0, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0,
1, 0, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0,
1, 0, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0,
1, 0, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0,
1, 0, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0,
1, 0, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0,
1, 0, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0,
1, 0, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0,
1, 0, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0,
1, 0, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0,
1, 0, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0,
1, 0, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0,
1, 0, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0,
1, 0, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0,
1, 0, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0,
1, 0, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0,
1, 0, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0,
1, 0, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0,
1, 0, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0,
1, 0, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0,
1, 0, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0,
1, 0, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0,
1, 0, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0,
1, 0, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0,
1, 0, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0,
1, 0, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0,
1, 0, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0,
1, 0, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0,
1, 0, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0,
1, 0, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0,
1, 0, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0,
1, 0, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0,
1, 0, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0,
1, 0, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0,
1, 0, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0,
1, 0, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0,
1, 0, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0,
1, 0, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0,
1, 0, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0,
1, 0, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0,
1, 0, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0,
1, 0, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0,
1, 0, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0,
1, 0, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 0, 0, 0, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 0, 0, 0, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 0, 0, 0, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 0, 0, 0, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0,
1, 0, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0,
1, 0, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0,
1, 0, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0,
1, 0, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0,
1, 0, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0,
1, 0, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0,
1, 0, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0,
1, 0, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0,
1, 0, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0,
1, 0, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0,
1, 0, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0,
1, 0, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0,
1, 0, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0,
1, 0, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0,
1, 0, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
1, 0, 0, 0, 0, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
1, 0, 0, 0, 0, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
1, 0, 0, 0, 0, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
1, 0, 0, 0, 0, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
1, 0, 0, 0, 0, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
1, 0, 0, 0, 0, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
1, 0, 0, 0, 0, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
1, 0, 0, 0, 0, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
1, 0, 0, 0, 0, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
1, 0, 0, 0, 0, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
1, 0, 0, 0, 0, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
1, 0, 0, 0, 0, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
1, 0, 0, 0, 0, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
1, 0, 0, 0, 0, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 0, 0, 0, 1, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
1, 0, 0, 0, 0, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 0, 0, 0, 1, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
1, 0, 0, 0, 0, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 0, 0, 0, 1, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
1, 0, 0, 0, 0, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 0, 0, 0, 1, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
1, 0, 0, 0, 0, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
1, 0, 0, 0, 0, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
1, 0, 0, 0, 0, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
1, 0, 0, 0, 0, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
1, 0, 0, 0, 0, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
1, 0, 0, 0, 0, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
1, 0, 0, 0, 0, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
1, 0, 0, 0, 0, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 1, 0,
0, 0, 0, 0, 0, 0 } } } },
{ MN_slwpcb, 0x12, 1, SPACE_XOP09, 1,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 1, 0,
0, 0, 0, 0, 0, 0 } } } },
{ MN_lwpval, 0x12, 3, SPACE_XOP0A, 1,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 0, 0, 0, 0, 0, 0, 1, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0 } },
{ { 1, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 1, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 0, 0, 0, 0, 0, 0, 1, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0 } },
{ { 1, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 1, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 1, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 1, 0, 1, 0,
0, 0, 0, 0, 1, 0 } },
{ { 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 1, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 1, 0,
0, 0, 0, 0, 0, 0 } },
{ { 1, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 1, 0, 1, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 0, 0, 0, 0, 0, 0, 1, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0 } },
{ { 1, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 1, 0, 1, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 1, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 1, 0, 1, 0,
0, 0, 0, 0, 1, 0 } },
{ { 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 1, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 1, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 1, 0, 1, 0,
0, 0, 0, 0, 1, 0 } },
{ { 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 1, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 1, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 1, 0, 1, 0,
0, 0, 0, 0, 1, 0 } },
{ { 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 1, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 1, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 1, 1, 0, 1, 0,
0, 0, 0, 0, 1, 0 } },
{ { 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 0, 1, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 1, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 1, 0, 1, 0,
0, 0, 0, 0, 1, 0 } },
{ { 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 1, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 1, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 1, 0, 1, 0,
0, 0, 0, 0, 1, 0 } },
{ { 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 1, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 1, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 1, 0, 1, 0,
0, 0, 0, 0, 1, 0 } },
{ { 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 1, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 1, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 1, 0, 1, 0,
0, 0, 0, 0, 1, 0 } },
{ { 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 1, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 1, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 1, 0, 1, 0,
0, 0, 0, 0, 1, 0 } },
{ { 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 1, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 1, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 1, 0, 1, 0,
0, 0, 0, 0, 1, 0 } },
{ { 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 1, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 1, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 1, 0, 1, 0,
0, 0, 0, 0, 1, 0 } },
{ { 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 1, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 1, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 1, 0, 1, 0,
0, 0, 0, 0, 1, 0 } },
{ { 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 1, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 1, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 1, 0, 1, 0,
0, 0, 0, 0, 1, 0 } },
{ { 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 1, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0 } } } },
{ MN_prefetchw, 0x0d, 1, SPACE_0F, 1,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0 } } } },
{ MN_femms, 0x0e, 0, SPACE_0F, None,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0 } } } },
{ MN_pavgusb, 0x0f, 2, SPACE_0F, 0xbf,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 6, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 1, 0,
0, 0, 0, 0, 1, 0 } },
{ { 6, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 6, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 1, 0,
0, 0, 0, 0, 1, 0 } },
{ { 6, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 6, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 1, 0,
0, 0, 0, 0, 1, 0 } },
{ { 6, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 6, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 1, 0,
0, 0, 0, 0, 1, 0 } },
{ { 6, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 6, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 1, 0,
0, 0, 0, 0, 1, 0 } },
{ { 6, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 6, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 1, 0,
0, 0, 0, 0, 1, 0 } },
{ { 6, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 6, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 1, 0,
0, 0, 0, 0, 1, 0 } },
{ { 6, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 6, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 1, 0,
0, 0, 0, 0, 1, 0 } },
{ { 6, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 6, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 1, 0,
0, 0, 0, 0, 1, 0 } },
{ { 6, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 6, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 1, 0,
0, 0, 0, 0, 1, 0 } },
{ { 6, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 6, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 1, 0,
0, 0, 0, 0, 1, 0 } },
{ { 6, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 6, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 1, 0,
0, 0, 0, 0, 1, 0 } },
{ { 6, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 6, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 1, 0,
0, 0, 0, 0, 1, 0 } },
{ { 6, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 6, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 1, 0,
0, 0, 0, 0, 1, 0 } },
{ { 6, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 6, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 1, 0,
0, 0, 0, 0, 1, 0 } },
{ { 6, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 6, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 1, 0,
0, 0, 0, 0, 1, 0 } },
{ { 6, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 6, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 1, 0,
0, 0, 0, 0, 1, 0 } },
{ { 6, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 6, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 1, 0,
0, 0, 0, 0, 1, 0 } },
{ { 6, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 6, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 1, 0,
0, 0, 0, 0, 1, 0 } },
{ { 6, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 6, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 1, 0,
0, 0, 0, 0, 1, 0 } },
{ { 6, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 6, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 1, 0,
0, 0, 0, 0, 1, 0 } },
{ { 6, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 6, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 1, 0,
0, 0, 0, 0, 1, 0 } },
{ { 6, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 6, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 1, 0,
0, 0, 0, 0, 1, 0 } },
{ { 6, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 6, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 1, 0,
0, 0, 0, 0, 1, 0 } },
{ { 6, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0 } } } },
{ MN_sysret, 0x07, 0, SPACE_0F, None,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0 } } } },
{ MN_swapgs, 0x01f8, 0, SPACE_0F, None,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 1, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0 } },
{ { { 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0 } } } },
{ MN_rdtscp, 0x01f9, 0, SPACE_0F, None,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0 } } } },
{ MN_clgi, 0x01dd, 0, SPACE_0F, None,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0 } } } },
{ MN_invlpga, 0x01df, 0, SPACE_0F, None,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0 } } } },
{ MN_invlpga, 0x01df, 2, SPACE_0F, None,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 0, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 0, 1, 0,
0, 0, 0, 0, 0, 0 } },
{ { 0, 2, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0 } } } },
{ MN_skinit, 0x01de, 1, SPACE_0F, None,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 0, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0, 0,
0, 0, 0, 0, 0, 0 } } } },
{ MN_stgi, 0x01dc, 0, SPACE_0F, None,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0 } } } },
{ MN_vmgexit, 0x01d9, 0, SPACE_0F, None,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0 } } } },
{ MN_vmload, 0x01da, 0, SPACE_0F, None,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0 } } } },
{ MN_vmload, 0x01da, 1, SPACE_0F, None,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 0, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 0, 1, 0,
0, 0, 0, 0, 0, 0 } } } },
{ MN_vmmcall, 0x01d9, 0, SPACE_0F, None,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0 } } } },
{ MN_vmrun, 0x01d8, 0, SPACE_0F, None,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0 } } } },
{ MN_vmrun, 0x01d8, 1, SPACE_0F, None,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 0, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 0, 1, 0,
0, 0, 0, 0, 0, 0 } } } },
{ MN_vmsave, 0x01db, 0, SPACE_0F, None,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0 } } } },
{ MN_vmsave, 0x01db, 1, SPACE_0F, None,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 0, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 0, 1, 0,
0, 0, 0, 0, 0, 0 } } } },
{ MN_movntsd, 0x2b, 2, SPACE_0F, None,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
1, 0, 0, 0, 0, 0 } },
{ { 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 1, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
1, 0, 0, 0, 0, 0 } },
{ { 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 1, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 0, 0, 0, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0 } },
{ { 0, 0, 0, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
1, 0, 0, 0, 0, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
1, 0, 0, 0, 0, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 0, 0, 0, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0 } },
{ { 0, 0, 0, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 1, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 1, 1, 0, 1, 0,
0, 0, 0, 0, 1, 0 } },
{ { 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 0, 1, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 1, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 1, 1, 0, 1, 0,
0, 0, 0, 0, 1, 0 } },
{ { 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 0, 1, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0 } } } },
{ MN_xcrypt_ecb, 0xa7c8, 0, SPACE_0F, None,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0 } } } },
{ MN_xcrypt_cbc, 0xa7d0, 0, SPACE_0F, None,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0 } } } },
{ MN_xcrypt_ctr, 0xa7d8, 0, SPACE_0F, None,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0 } } } },
{ MN_xcrypt_cfb, 0xa7e0, 0, SPACE_0F, None,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0 } } } },
{ MN_xcrypt_ofb, 0xa7e8, 0, SPACE_0F, None,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0 } } } },
{ MN_montmul, 0xa6c0, 0, SPACE_0F, None,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0 } } } },
{ MN_xsha1, 0xa6c8, 0, SPACE_0F, None,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0 } } } },
{ MN_xsha256, 0xa6d0, 0, SPACE_0F, None,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0 } } } },
{ MN_xstorerng, 0xa7c0, 0, SPACE_0F, None,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0 } } } },
{ MN_xcryptecb, 0xa7c8, 0, SPACE_0F, None,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0 } } } },
{ MN_xcryptcbc, 0xa7d0, 0, SPACE_0F, None,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0 } } } },
{ MN_xcryptctr, 0xa7d8, 0, SPACE_0F, None,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0 } } } },
{ MN_xcryptcfb, 0xa7e0, 0, SPACE_0F, None,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0 } } } },
{ MN_xcryptofb, 0xa7e8, 0, SPACE_0F, None,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0 } } } },
{ MN_xstore, 0xa7c0, 0, SPACE_0F, None,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0 } } } },
{ MN_adcx, 0xf6, 2, SPACE_0F38, None,
0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 1, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 1, 0, 1, 0,
0, 0, 0, 0, 1, 0 } },
{ { 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 1, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 1, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 1, 0, 1, 0,
0, 0, 0, 0, 1, 0 } },
{ { 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 1, 0,
0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 0, 1, 0,
0, 0, 0, 0, 0, 0 } } } },
{ MN_clac, 0x01ca, 0, SPACE_0F, None,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0 } } } },
{ MN_stac, 0x01cb, 0, SPACE_0F, None,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0 } } } },
{ MN_bnd, 0xf2, 0, SPACE_BASE, None,
0, 0, 0, 0, 0, 0, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0 } } } },
{ MN_bndmk, 0x1b, 2, SPACE_0F, None,
0, 0, 0, 0, 0, 0, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 1, 0, 1, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0 } },
{ { 9, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 9, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 1, 0, 1, 0, 0, 0, 0, 0, 0,
1, 0, 0, 0, 1, 0 } },
{ { 9, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 1, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0 } },
{ { { 1, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 1, 0, 1, 0, 0, 1, 0, 0, 0,
0, 0, 0, 0, 0, 0 } },
{ { 9, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 1, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0 } },
{ { { 1, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 1, 0, 1, 0, 0, 0, 0, 1, 0,
0, 0, 0, 0, 0, 0 } },
{ { 9, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 1, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0 } },
{ { { 1, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 1, 0, 1, 0, 0, 1, 0, 0, 0,
0, 0, 0, 0, 0, 0 } },
{ { 9, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 1, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0 } },
{ { { 1, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 1, 0, 1, 0, 0, 0, 0, 1, 0,
0, 0, 0, 0, 0, 0 } },
{ { 9, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 1, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0 } },
{ { { 1, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 1, 0, 1, 0, 0, 1, 0, 0, 0,
0, 0, 0, 0, 0, 0 } },
{ { 9, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 1, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0 } },
{ { { 1, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 1, 0, 1, 0, 0, 0, 0, 1, 0,
0, 0, 0, 0, 0, 0 } },
{ { 9, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 9, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0 } },
{ { 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 1, 0, 1, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 1, 0, 1, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0 } },
{ { 9, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 0, 0, 0, 1, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0,
1, 0, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0,
1, 0, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0,
1, 0, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 0, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
1, 0, 0, 0, 0, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0,
1, 0, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0,
1, 0, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0,
1, 0, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
1, 0, 0, 0, 0, 0 } } } },
- { MN_vsha512rnds2, 0xcb, 3, SPACE_0F38, None,
+ { MN_kandb, 0x41, 3, SPACE_0F, None,
{ 0, 0, 0, 1, 0, 0, 0, 0, 0, 0, 1, 1, 1, 1, 1, 0, 0, 0, 0, 0,
- 0, 0, 0, 2, 1, 1, 3, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 },
+ 0, 0, 0, 2, 1, 1, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 },
{ { 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0, 0, 0, 0, 0,
+ 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
- { { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 1, 0, 0, 0, 0, 0 } },
- { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 1, 0, 0, 0, 0 } },
- { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 1, 0, 0, 0, 0 } } } },
- { MN_vsha512msg1, 0xcc, 2, SPACE_0F38, None,
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
+ { { { 8, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
+ 0, 0, 0, 0, 0, 0 } },
+ { { 8, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
+ 0, 0, 0, 0, 0, 0 } },
+ { { 8, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
+ 0, 0, 0, 0, 0, 0 } } } },
+ { MN_kandw, 0x41, 3, SPACE_0F, None,
{ 0, 0, 0, 1, 0, 0, 0, 0, 0, 0, 1, 1, 1, 1, 1, 0, 0, 0, 0, 0,
- 0, 0, 0, 2, 0, 1, 3, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 },
+ 0, 0, 0, 2, 1, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 },
{ { 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
- { { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 1, 0, 0, 0, 0, 0 } },
- { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 1, 0, 0, 0, 0 } } } },
- { MN_vsha512msg2, 0xcd, 2, SPACE_0F38, None,
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
+ { { { 8, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
+ 0, 0, 0, 0, 0, 0 } },
+ { { 8, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
+ 0, 0, 0, 0, 0, 0 } },
+ { { 8, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
+ 0, 0, 0, 0, 0, 0 } } } },
+ { MN_kandnb, 0x42, 3, SPACE_0F, None,
{ 0, 0, 0, 1, 0, 0, 0, 0, 0, 0, 1, 1, 1, 1, 1, 0, 0, 0, 0, 0,
- 0, 0, 0, 2, 0, 1, 3, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 },
+ 0, 0, 0, 2, 1, 1, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 },
{ { 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0, 0, 0, 0, 0,
+ 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
- { { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 1, 0, 0, 0, 0 } },
- { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 1, 0, 0, 0, 0 } } } },
- { MN_vsm3rnds2, 0xde, 4, SPACE_0F3A, None,
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
+ { { { 8, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
+ 0, 0, 0, 0, 0, 0 } },
+ { { 8, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
+ 0, 0, 0, 0, 0, 0 } },
+ { { 8, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
+ 0, 0, 0, 0, 0, 0 } } } },
+ { MN_kandnw, 0x42, 3, SPACE_0F, None,
{ 0, 0, 0, 1, 0, 0, 0, 0, 0, 0, 1, 1, 1, 1, 1, 0, 0, 0, 0, 0,
- 0, 0, 0, 1, 1, 1, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 },
+ 0, 0, 0, 2, 1, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 },
{ { 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
- { { { 0, 0, 0, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0 } },
- { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0,
- 1, 0, 0, 0, 1, 0 } },
- { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 1, 0, 0, 0, 0, 0 } },
- { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 1, 0, 0, 0, 0, 0 } } } },
- { MN_vsm3msg1, 0xda, 3, SPACE_0F38, None,
- { 0, 0, 0, 1, 0, 0, 0, 0, 0, 0, 1, 1, 1, 1, 1, 0, 0, 0, 0, 0,
- 0, 0, 0, 1, 1, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 },
- { { 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
- { { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0,
- 1, 0, 0, 0, 1, 0 } },
- { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 1, 0, 0, 0, 0, 0 } },
- { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 1, 0, 0, 0, 0, 0 } } } },
- { MN_vsm3msg2, 0xda, 3, SPACE_0F38, None,
- { 0, 0, 0, 1, 0, 0, 0, 0, 0, 0, 1, 1, 1, 1, 1, 0, 0, 0, 0, 0,
- 0, 0, 0, 1, 1, 1, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 },
- { { 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
- { { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0,
- 1, 0, 0, 0, 1, 0 } },
- { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 1, 0, 0, 0, 0, 0 } },
- { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 1, 0, 0, 0, 0, 0 } } } },
- { MN_vsm4key4, 0xda, 3, SPACE_0F38, None,
- { 0, 0, 0, 1, 0, 0, 0, 1, 0, 0, 1, 1, 1, 1, 1, 0, 0, 0, 0, 0,
- 0, 0, 0, 1, 1, 1, 2, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 },
- { { 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
- { { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0,
- 1, 1, 0, 0, 1, 0 } },
- { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 1, 1, 0, 0, 0, 0 } },
- { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 1, 1, 0, 0, 0, 0 } } } },
- { MN_vsm4rnds4, 0xda, 3, SPACE_0F38, None,
- { 0, 0, 0, 1, 0, 0, 0, 1, 0, 0, 1, 1, 1, 1, 1, 0, 0, 0, 0, 0,
- 0, 0, 0, 1, 1, 1, 3, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 },
- { { 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
- { { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0,
- 1, 1, 0, 0, 1, 0 } },
- { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 1, 1, 0, 0, 0, 0 } },
- { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 1, 1, 0, 0, 0, 0 } } } },
- { MN_kandb, 0x41, 3, SPACE_0F, None,
- { 0, 0, 0, 1, 0, 0, 0, 0, 0, 0, 1, 1, 1, 1, 1, 0, 0, 0, 0, 0,
- 0, 0, 0, 2, 1, 1, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 },
- { { 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
- { { { 8, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0 } },
- { { 8, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0 } },
- { { 8, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0 } } } },
- { MN_kandw, 0x41, 3, SPACE_0F, None,
- { 0, 0, 0, 1, 0, 0, 0, 0, 0, 0, 1, 1, 1, 1, 1, 0, 0, 0, 0, 0,
- 0, 0, 0, 2, 1, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 },
- { { 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
- { { { 8, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0 } },
- { { 8, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0 } },
- { { 8, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0 } } } },
- { MN_kandnb, 0x42, 3, SPACE_0F, None,
- { 0, 0, 0, 1, 0, 0, 0, 0, 0, 0, 1, 1, 1, 1, 1, 0, 0, 0, 0, 0,
- 0, 0, 0, 2, 1, 1, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 },
- { { 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
- { { { 8, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0 } },
- { { 8, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0 } },
- { { 8, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0 } } } },
- { MN_kandnw, 0x42, 3, SPACE_0F, None,
- { 0, 0, 0, 1, 0, 0, 0, 0, 0, 0, 1, 1, 1, 1, 1, 0, 0, 0, 0, 0,
- 0, 0, 0, 2, 1, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 },
- { { 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 8, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0 } },
{ { 8, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 8, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0 } },
{ { 8, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 8, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0 } },
{ { 8, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 8, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0 } },
{ { 8, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 8, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0 } },
{ { 8, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 8, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0 } },
{ { 8, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 8, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0 } },
{ { 8, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 8, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 1, 0, 0, 0, 0, 0,
0, 0, 0, 0, 1, 0 } },
{ { 8, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 8, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0 } },
{ { 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 1, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0, 0,
0, 0, 0, 0, 0, 0 } },
{ { 8, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 8, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 1, 0, 0, 0, 0,
0, 0, 0, 0, 1, 0 } },
{ { 8, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 8, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0 } },
{ { 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 1, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0, 0,
0, 0, 0, 0, 0, 0 } },
{ { 8, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 8, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0 } },
{ { 8, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 8, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0 } },
{ { 8, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 8, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0 } },
{ { 8, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 8, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0 } },
{ { 8, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 0, 0, 0, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0 } },
{ { 8, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 0, 0, 0, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0 } },
{ { 8, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 0, 0, 0, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0 } },
{ { 8, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 0, 0, 0, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0 } },
{ { 8, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 8, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0 } },
{ { 8, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 1, 0, 0, 0, 0,
1, 1, 1, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 1, 0, 0, 0, 0,
1, 1, 1, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 1, 0, 0, 0, 0,
1, 1, 1, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 1, 0, 0, 0, 0,
1, 1, 1, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 1, 0, 0, 0, 0,
1, 1, 1, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 1, 0, 0, 0, 0,
1, 0, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 1, 0, 0, 0, 0,
1, 0, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 1, 0, 0, 0, 0,
1, 0, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 1, 0, 0, 0, 0,
1, 0, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 1, 0, 0, 0, 0,
1, 0, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 0, 0, 0, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 1, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 0, 0, 0, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 1, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 1, 0, 0, 0,
1, 1, 1, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 1, 0,
1, 1, 1, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 1, 0, 0, 0,
1, 1, 1, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 1, 0,
1, 1, 1, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 1, 0, 0, 0,
1, 1, 1, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 1, 0,
1, 1, 1, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 1, 0, 0, 0,
1, 1, 1, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 1, 0,
1, 1, 1, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 1, 0, 0, 0,
1, 1, 1, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 1, 0,
1, 1, 1, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 1, 0, 0, 0,
1, 1, 1, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 1, 0,
1, 1, 1, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 1, 0,
1, 1, 1, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 1, 0,
1, 1, 1, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 1, 0,
1, 1, 1, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 1, 0,
1, 1, 1, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 1, 0, 0, 0,
1, 1, 1, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 1, 0,
1, 1, 1, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 1, 0, 0, 0,
1, 1, 1, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 1, 0,
1, 1, 1, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 1, 0,
1, 1, 1, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 0, 0, 0, 1, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 1, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 0, 0, 0, 1, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 1, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0,
1, 0, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0,
1, 0, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0,
0, 1, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0,
0, 1, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 1, 0, 0, 0, 0,
1, 0, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 1, 0, 0, 0, 0,
1, 0, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
1, 1, 1, 0, 0, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
1, 1, 1, 0, 0, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
1, 1, 1, 0, 0, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
1, 1, 1, 0, 0, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 1, 0, 0, 0 } },
{ { 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 1, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
1, 0, 0, 0, 0, 0 } },
{ { 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 1, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 1, 0, 0, 0, 0 } },
{ { 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 1, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 1, 0, 0, 0 } },
{ { 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 1, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
1, 1, 0, 0, 0, 0 } },
{ { 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 1, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 1, 0, 0, 0, 0 } },
{ { 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 1, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
1, 0, 0, 0, 0, 0 } },
{ { 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 1, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
1, 0, 0, 0, 0, 0 } },
{ { 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 1, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 1, 0, 0, 0 } },
{ { 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 1, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
1, 0, 0, 0, 0, 0 } },
{ { 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 1, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 1, 0, 0, 0, 0 } },
{ { 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 1, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 1, 0, 0, 0 } },
{ { 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 1, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
1, 1, 0, 0, 0, 0 } },
{ { 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 1, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 1, 0, 0, 0 } },
{ { 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 1, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
1, 0, 0, 0, 0, 0 } },
{ { 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 1, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 1, 0, 0, 0, 0 } },
{ { 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 1, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 1, 0, 0, 0 } },
{ { 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 1, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
1, 0, 0, 0, 0, 0 } },
{ { 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 1, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 1, 0, 0, 0, 0 } },
{ { 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 1, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 1, 0, 0, 0, 0 } },
{ { 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 1, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
1, 0, 0, 0, 0, 0 } },
{ { 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 1, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
1, 0, 0, 0, 0, 0 } },
{ { 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 1, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 1, 0, 0, 0,
0, 1, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 1, 0, 1, 0,
1, 0, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 1, 0, 0, 0,
1, 0, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 1, 0, 0, 0,
1, 1, 1, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 1, 0,
0, 0, 1, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 1, 0,
1, 1, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 1, 0,
1, 1, 0, 0, 0, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 1, 0,
1, 0, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 1, 0,
0, 1, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 1, 0, 0, 0,
1, 0, 0, 0, 1, 0 } },
{ { 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 1, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 1, 0,
1, 0, 0, 0, 1, 0 } },
{ { 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 1, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 1, 0, 0, 0, 0,
1, 0, 0, 0, 1, 0 } },
{ { 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 1, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 1, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 1, 0, 0, 0,
0, 0, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 1, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 1, 0,
0, 0, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 1, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 1, 0, 0, 0,
0, 0, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 1, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 1, 0,
0, 0, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 1, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 1, 0, 1, 0,
0, 0, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 1, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 1, 0, 1, 0,
0, 0, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 1, 0,
0, 0, 1, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 1, 0,
1, 1, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 1, 0,
1, 1, 0, 0, 0, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 1, 0,
1, 0, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 1, 0,
0, 1, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 1, 0, 0, 0,
1, 1, 1, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 1, 0, 0, 0,
1, 0, 0, 0, 1, 0 } },
{ { 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 1, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 1, 0,
1, 0, 0, 0, 1, 0 } },
{ { 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 1, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 1, 0, 0, 0, 0,
1, 0, 0, 0, 1, 0 } },
{ { 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 1, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 1, 0, 0, 0,
1, 1, 1, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0,
1, 1, 1, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0,
1, 1, 1, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0,
1, 1, 1, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0,
1, 1, 1, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 0, 0, 0, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 0, 0, 0, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 0, 0, 0, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 0, 0, 0, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 0, 0, 0, 1, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 1, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 0, 0, 0, 1, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 1, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 0, 0, 0, 1, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 1, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 0, 0, 0, 1, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 1, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 0, 0, 0, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 1, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 0, 0, 0, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 1, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 0, 0, 0, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 1, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 0, 0, 0, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 1, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 0, 0, 0, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 1, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 0, 0, 0, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 1, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 0, 0, 0, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 1, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 0, 0, 0, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 1, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 0, 0, 0, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 1, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 0, 0, 0, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 1, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 0, 0, 0, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 1, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 0, 0, 0, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 1, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 1, 0, 0, 0, 0,
1, 1, 1, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 1, 0, 0, 0, 0,
1, 1, 1, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 1, 0, 0, 0, 0,
1, 1, 1, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 1, 0, 0, 0, 0,
1, 0, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 1, 0, 0, 0, 0,
1, 0, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 1, 0, 0, 0, 0,
1, 0, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 1, 0, 0, 0, 0,
1, 1, 1, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 1, 0, 0, 0, 0,
1, 1, 1, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 1, 0, 0, 0, 0,
1, 1, 1, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 1, 0, 0, 0, 0,
1, 1, 1, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 1, 0, 0, 0, 0,
1, 1, 1, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 1, 0, 0, 0, 0,
1, 1, 1, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 1, 0, 0, 0, 0,
1, 0, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 1, 0, 0, 0, 0,
1, 0, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 1, 0, 0, 0, 0,
1, 0, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 1, 0, 0, 0, 0,
1, 1, 1, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 1, 0, 0, 0, 0,
1, 1, 1, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 1, 0, 0, 0, 0,
1, 1, 1, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 1, 0, 0, 0, 0,
1, 1, 1, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 1, 0, 0, 0, 0,
1, 1, 1, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 1, 0, 0, 0, 0,
1, 1, 1, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 1, 0, 0, 0, 0,
1, 0, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 1, 0, 0, 0, 0,
1, 0, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 1, 0, 0, 0, 0,
1, 0, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 1, 0, 0, 0, 0,
1, 1, 1, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 1, 0, 0, 0, 0,
1, 1, 1, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 1, 0, 0, 0, 0,
1, 1, 1, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 1, 0, 0, 0, 0,
1, 0, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 1, 0, 0, 0, 0,
1, 0, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 1, 0, 0, 0, 0,
1, 0, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 1, 0, 0, 0,
1, 1, 1, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 1, 0,
1, 1, 1, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 1, 0, 0, 0, 0,
1, 1, 1, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 1, 0, 0, 0,
1, 0, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 1, 0,
1, 0, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 1, 0, 0, 0, 0,
1, 0, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 1, 0, 0, 0,
1, 1, 1, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 1, 0,
1, 1, 1, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 1, 0, 0, 0, 0,
1, 1, 1, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 1, 0, 0, 0,
1, 0, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 1, 0,
1, 0, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 1, 0, 0, 0, 0,
1, 0, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 0, 0, 0, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 0, 0, 0, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 0, 0, 0, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 0, 0, 0, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 1, 0, 0, 0, 0,
1, 1, 1, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 1, 0, 0, 0, 0,
1, 0, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 1, 0, 0, 0, 0,
1, 1, 1, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 1, 0, 0, 0, 0,
1, 0, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0,
1, 1, 1, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0,
1, 1, 1, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0,
1, 1, 1, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0,
1, 1, 1, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 1, 0, 0, 0, 0,
0, 0, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
1, 0, 0, 0, 0, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 1, 0,
1, 1, 1, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 1, 0, 0, 0,
1, 1, 1, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 1, 0,
1, 1, 1, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 1, 0, 0, 0,
1, 1, 1, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 1, 0,
1, 1, 1, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 1, 0, 0, 0,
1, 1, 1, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 1, 0,
1, 1, 1, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 1, 0, 0, 0,
1, 1, 1, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 1, 0,
1, 1, 1, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 0, 0, 0, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 1, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 0, 0, 0, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 1, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 0, 0, 0, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 1, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 0, 0, 0, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 1, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 1, 0, 0, 0,
1, 1, 1, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 1, 0,
1, 1, 1, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 1, 0, 0, 0,
1, 1, 1, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 1, 0,
1, 1, 1, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 1, 0, 0, 0,
1, 1, 1, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 1, 0,
1, 1, 1, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 1, 0, 0, 0,
1, 1, 1, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 1, 0,
1, 1, 1, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 1, 0, 0, 0,
1, 1, 1, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 1, 0,
1, 1, 1, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 1, 0, 0, 0,
1, 1, 1, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 1, 0,
1, 1, 1, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 1, 0, 0, 0,
1, 1, 1, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 1, 0,
1, 1, 1, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 1, 0, 0, 0,
1, 1, 1, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 1, 0,
1, 1, 1, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 1, 0, 0, 0,
1, 1, 1, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 1, 0,
1, 1, 1, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 1, 0, 0, 0,
1, 1, 1, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 1, 0,
1, 1, 1, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 1, 0, 0, 0,
1, 1, 1, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 1, 0,
1, 1, 1, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 1, 0, 0, 0,
1, 1, 1, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 1, 0,
1, 1, 1, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 1, 0, 0, 0,
1, 1, 1, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 1, 0,
1, 1, 1, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 1, 0, 0, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
1, 0, 0, 0, 0, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 1, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 1, 0, 0, 0, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 1, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 1, 0, 0, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
1, 0, 0, 0, 0, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 1, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 1, 0, 0, 0, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 1, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 1, 0, 0, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
1, 0, 0, 0, 0, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 1, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 1, 0, 0, 0, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 1, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 1, 0, 0, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
1, 0, 0, 0, 0, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 1, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 1, 0, 0, 0, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 1, 0, 0, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
1, 0, 0, 0, 0, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 1, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 1, 0, 0, 0, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 1, 0, 0, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
1, 0, 0, 0, 0, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 1, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 1, 0, 0, 0, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 1, 0, 0, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 1, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
1, 0, 0, 0, 0, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 1, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 1, 0, 0, 0, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 1, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 1, 0, 0, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 1, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
1, 0, 0, 0, 0, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 1, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 1, 0, 0, 0, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 1, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 1, 0, 0, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 1, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
1, 0, 0, 0, 0, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 1, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 1, 0, 0, 0, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 1, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 1, 0, 0, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
1, 0, 0, 0, 0, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 1, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 1, 0, 0, 0, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 1, 0, 0, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
1, 0, 0, 0, 0, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 1, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 1, 0, 0, 0, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 1, 0, 0, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
1, 0, 0, 0, 0, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 1, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 1, 0, 0, 0, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 1, 0, 0, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
1, 0, 0, 0, 0, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 1, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 1, 0, 0, 0, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 1, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 1, 0, 0, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
1, 0, 0, 0, 0, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 1, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 1, 0, 0, 0, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 1, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 1, 0, 0, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
1, 0, 0, 0, 0, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 1, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 1, 0, 0, 0, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 1, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 0, 0, 0, 1, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 1, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 0, 0, 0, 1, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 1, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 0, 0, 0, 1, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 1, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 0, 0, 0, 1, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 1, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0,
1, 0, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 0, 0, 0, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 1, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 1, 0, 0, 0,
1, 1, 1, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 1, 0,
1, 1, 1, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 1, 0, 0, 0,
1, 0, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 1, 0,
1, 0, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 1, 0, 0, 0,
1, 1, 1, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 1, 0,
1, 1, 1, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 1, 0, 0, 0,
1, 0, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 1, 0,
1, 0, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 0, 0, 0, 1, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 1, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 0, 0, 0, 1, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 1, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 0, 0, 0, 1, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 1, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 0, 0, 0, 1, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 1, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 8, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 8, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 1, 0, 0, 0,
1, 1, 1, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 1, 0,
1, 1, 1, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 1, 0, 0, 0,
1, 1, 1, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 1, 0,
1, 1, 1, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 1, 0, 0, 0,
0, 0, 1, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 1, 0,
0, 0, 1, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 1, 0, 0, 0,
0, 0, 1, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 1, 0,
0, 0, 1, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 1, 0, 0, 0,
1, 0, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 1, 0,
1, 0, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 1, 0, 0, 0,
0, 0, 1, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 1, 0,
0, 0, 1, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 1, 0, 0, 0,
1, 0, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 1, 0,
1, 0, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 1, 0,
0, 0, 0, 0, 1, 0 } } } },
{ MN_vgatherpf0dps, 0xc6, 1, SPACE_0F38, 1,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 1, 0, 0, 0,
0, 0, 0, 0, 1, 0 } } } },
{ MN_vgatherpf0qps, 0xc7, 1, SPACE_0F38, 1,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 1, 0, 0, 0,
0, 0, 0, 0, 1, 0 } } } },
{ MN_vgatherpf0qpd, 0xc7, 1, SPACE_0F38, 1,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 1, 0,
0, 0, 0, 0, 1, 0 } } } },
{ MN_vgatherpf1dpd, 0xc6, 1, SPACE_0F38, 2,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 1, 0,
0, 0, 0, 0, 1, 0 } } } },
{ MN_vgatherpf1dps, 0xc6, 1, SPACE_0F38, 2,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 1, 0, 0, 0,
0, 0, 0, 0, 1, 0 } } } },
{ MN_vgatherpf1qps, 0xc7, 1, SPACE_0F38, 2,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 1, 0, 0, 0,
0, 0, 0, 0, 1, 0 } } } },
{ MN_vgatherpf1qpd, 0xc7, 1, SPACE_0F38, 2,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 1, 0,
0, 0, 0, 0, 1, 0 } } } },
{ MN_vscatterpf0dpd, 0xc6, 1, SPACE_0F38, 5,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 1, 0,
0, 0, 0, 0, 1, 0 } } } },
{ MN_vscatterpf0dps, 0xc6, 1, SPACE_0F38, 5,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 1, 0, 0, 0,
0, 0, 0, 0, 1, 0 } } } },
{ MN_vscatterpf0qps, 0xc7, 1, SPACE_0F38, 5,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 1, 0, 0, 0,
0, 0, 0, 0, 1, 0 } } } },
{ MN_vscatterpf0qpd, 0xc7, 1, SPACE_0F38, 5,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 1, 0,
0, 0, 0, 0, 1, 0 } } } },
{ MN_vscatterpf1dpd, 0xc6, 1, SPACE_0F38, 6,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 1, 0,
0, 0, 0, 0, 1, 0 } } } },
{ MN_vscatterpf1dps, 0xc6, 1, SPACE_0F38, 6,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 1, 0, 0, 0,
0, 0, 0, 0, 1, 0 } } } },
{ MN_vscatterpf1qps, 0xc7, 1, SPACE_0F38, 6,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 1, 0, 0, 0,
0, 0, 0, 0, 1, 0 } } } },
{ MN_vscatterpf1qpd, 0xc7, 1, SPACE_0F38, 6,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 1, 0,
0, 0, 0, 0, 1, 0 } } } },
{ MN_prefetchwt1, 0x0d, 1, SPACE_0F, 2,
{ { 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0 } } } },
{ MN_clflushopt, 0xae, 1, SPACE_0F, 7,
{ { 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0 } } } },
{ MN_xrstors, 0xc7, 1, SPACE_0F, 3,
{ { 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 1, 0 } } } },
{ MN_xrstors64, 0xc7, 1, SPACE_0F, 3,
{ { 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 1, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0 } },
{ { { 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 1, 0, 1, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 1, 0 } } } },
{ MN_xsaves, 0xc7, 1, SPACE_0F, 5,
{ { 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 1, 0 } } } },
{ MN_xsaves64, 0xc7, 1, SPACE_0F, 5,
{ { 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 1, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0 } },
{ { { 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 1, 0, 1, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 1, 0 } } } },
{ MN_xsavec, 0xc7, 1, SPACE_0F, 4,
{ { 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 1, 0 } } } },
{ MN_xsavec64, 0xc7, 1, SPACE_0F, 4,
{ { 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 1, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0 } },
{ { { 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 1, 0, 1, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 1, 0 } } } },
{ MN_encls, 0x01cf, 0, SPACE_0F, None,
{ { 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0 } } } },
{ MN_enclu, 0x01d7, 0, SPACE_0F, None,
{ { 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0 } } } },
{ MN_enclv, 0x01c0, 0, SPACE_0F, None,
{ { 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0 } } } },
{ MN_kaddd, 0x4a, 3, SPACE_0F, None,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 8, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0 } },
{ { 8, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 8, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0 } },
{ { 8, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 8, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0 } },
{ { 8, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 8, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0 } },
{ { 8, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 8, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0 } },
{ { 8, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 8, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0 } },
{ { 8, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 8, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 1, 0, 0, 0,
0, 0, 0, 0, 1, 0 } },
{ { 8, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 8, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0 } },
{ { 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 1, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0, 0,
0, 0, 0, 0, 0, 0 } },
{ { 8, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 8, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 1, 0,
0, 0, 0, 0, 1, 0 } },
{ { 8, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 8, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0 } },
{ { 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 1, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0,
0, 0, 0, 0, 0, 0 } },
{ { 8, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 8, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0 } },
{ { 8, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 8, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0 } },
{ { 8, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 8, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0 } },
{ { 8, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 8, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0 } },
{ { 8, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 8, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0 } },
{ { 8, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 8, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0 } },
{ { 8, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 8, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0 } },
{ { 8, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 8, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0 } },
{ { 8, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 8, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0 } },
{ { 8, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 8, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0 } },
{ { 8, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 8, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0 } },
{ { 8, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 8, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0 } },
{ { 8, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 8, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0 } },
{ { 8, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 8, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0 } },
{ { 8, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 0, 0, 0, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0 } },
{ { 8, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 0, 0, 0, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0 } },
{ { 8, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 0, 0, 0, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0 } },
{ { 8, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 0, 0, 0, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0 } },
{ { 8, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 0, 0, 0, 1, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0,
1, 1, 1, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0,
1, 1, 1, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0,
1, 1, 1, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0,
1, 1, 1, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
+ 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0,
1, 1, 1, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0,
1, 1, 1, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
+ 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0,
1, 1, 1, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0,
1, 1, 1, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
+ 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0,
1, 1, 1, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0,
1, 1, 1, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0,
1, 1, 1, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0,
1, 1, 1, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0,
1, 1, 1, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 0, 0, 0, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 0, 0, 0, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 0, 0, 0, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 0, 0, 0, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0,
1, 1, 1, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0,
1, 1, 1, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0,
1, 1, 1, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0,
1, 1, 1, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0,
1, 1, 1, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0,
1, 1, 1, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0,
1, 1, 1, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0,
1, 1, 1, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0,
1, 1, 1, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0,
1, 1, 1, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0,
1, 1, 1, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0,
1, 1, 1, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0,
1, 1, 1, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0,
1, 1, 1, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0,
1, 1, 1, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0,
1, 1, 1, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0,
1, 1, 1, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0,
1, 1, 1, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0,
1, 1, 1, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0,
1, 1, 1, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0,
1, 1, 1, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0,
1, 1, 1, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
1, 1, 1, 0, 0, 0 } },
{ { 8, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
1, 1, 1, 0, 0, 0 } },
{ { 8, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 8, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 8, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 1, 0, 0, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
1, 0, 0, 0, 0, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 1, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 1, 0, 0, 0, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 1, 0, 0, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
1, 0, 0, 0, 0, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 1, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 1, 0, 0, 0, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 1, 0, 0, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
1, 0, 0, 0, 0, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 1, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 1, 0, 0, 0, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0,
1, 1, 1, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0,
1, 1, 1, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0,
1, 1, 1, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0,
1, 1, 1, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 8, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0 } },
{ { 8, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 8, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0 } },
{ { 8, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 8, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0 } },
{ { 8, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 8, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0 } },
{ { 8, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 1, 0,
1, 0, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0,
0, 1, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 1, 0,
1, 0, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0,
0, 1, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0,
1, 0, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0,
1, 0, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 1, 0,
1, 1, 1, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 1, 0,
1, 1, 1, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 1, 0, 0, 0,
0, 1, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 1, 0, 1, 0,
1, 0, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 1, 0, 0, 0,
1, 0, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 1, 0, 0, 0,
0, 1, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 1, 0, 1, 0,
1, 0, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 1, 0, 0, 0,
1, 0, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 1, 0,
1, 1, 1, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 1, 0,
1, 1, 1, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 1, 0,
0, 0, 1, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 1, 0,
1, 1, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 1, 0,
1, 1, 0, 0, 0, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 1, 0,
1, 0, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 1, 0,
0, 1, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 1, 0,
1, 1, 1, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 1, 0,
1, 1, 1, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 1, 0, 0, 0,
0, 1, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 1, 0, 1, 0,
1, 0, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 1, 0, 0, 0,
1, 0, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 1, 0, 0, 0,
0, 1, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 1, 0, 1, 0,
1, 0, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 1, 0, 0, 0,
1, 0, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 1, 0,
0, 0, 1, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 1, 0,
1, 1, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 1, 0,
1, 1, 0, 0, 0, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 1, 0,
1, 0, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 1, 0,
0, 1, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 0, 0, 0, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 0, 0, 0, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 0, 0, 0, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 0, 0, 0, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 0, 0, 0, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 0, 0, 0, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 0, 0, 0, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 0, 0, 0, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 0, 0, 0, 1, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 1, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 0, 0, 0, 1, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 1, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 0, 0, 0, 1, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 1, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 0, 0, 0, 1, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 1, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 0, 0, 0, 1, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 1, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 0, 0, 0, 1, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 1, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 0, 0, 0, 1, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 1, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 0, 0, 0, 1, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 1, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 0, 0, 0, 1, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 1, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 0, 0, 0, 1, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 1, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 0, 0, 0, 1, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 1, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 0, 0, 0, 1, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 1, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 0, 0, 0, 1, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 1, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
1, 1, 1, 0, 0, 0 } },
{ { 8, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
1, 1, 1, 0, 0, 0 } },
{ { 8, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 8, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 8, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 1, 0,
1, 1, 1, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 0, 0, 0, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 1, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 0, 0, 0, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 1, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 0, 0, 0, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 1, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 0, 0, 0, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 1, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 0, 0, 0, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 1, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 0, 0, 0, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 1, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 0, 0, 0, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 1, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 0, 0, 0, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 1, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 0, 0, 0, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 1, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 0, 0, 0, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 1, 0, 0, 0, 0,
{ { 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0 } } } },
{ MN_vpmadd52huq, 0xb5, 3, SPACE_0F38, None,
{ { 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 1, 0,
1, 1, 1, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0,
1, 1, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
{ { 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 1, 0,
1, 1, 1, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0,
1, 1, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
+ 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 1, 0,
1, 1, 1, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
+ 0, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0,
1, 0, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
+ 0, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0,
1, 0, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
+ 0, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0,
1, 0, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
+ 0, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0,
1, 0, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
+ 0, 0, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0,
1, 0, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
+ 0, 0, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0,
1, 0, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
+ 0, 0, 0, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 1, 0, 0, 0,
1, 1, 1, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
+ 0, 0, 0, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 1, 0,
1, 1, 1, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
+ 0, 0, 0, 0, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
1, 1, 1, 0, 0, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
+ 0, 0, 0, 0, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
1, 1, 1, 0, 0, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
+ 0, 0, 0, 0, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0,
1, 1, 1, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
+ 0, 0, 0, 0, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0,
1, 1, 1, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
+ 0, 0, 0, 0, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 1, 0, 0, 0,
1, 1, 1, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
+ 0, 0, 0, 0, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 1, 0,
1, 1, 1, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
+ 0, 0, 0, 0, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0,
1, 1, 1, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
+ 0, 0, 0, 0, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 1, 0, 0, 0,
1, 1, 1, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
+ 0, 0, 0, 0, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 1, 0,
1, 1, 1, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
+ 0, 0, 0, 0, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0,
1, 1, 1, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
+ 0, 0, 0, 0, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 0, 0, 0, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 1, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
+ 0, 0, 0, 0, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 0, 0, 0, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 1, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
+ 0, 0, 0, 0, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 0, 0, 0, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
+ 0, 0, 0, 0, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 0, 0, 0, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 1, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
+ 0, 0, 0, 0, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 0, 0, 0, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 1, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
+ 0, 0, 0, 0, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 0, 0, 0, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
+ 0, 0, 0, 0, 0, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 1, 0, 0, 0,
1, 1, 1, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0,
1, 1, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
+ 0, 0, 0, 0, 0, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 1, 0, 0, 0,
1, 1, 1, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0,
1, 1, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
+ 0, 0, 0, 0, 0, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 1, 0, 0, 0,
1, 1, 1, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0,
1, 1, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
+ 0, 0, 0, 0, 0, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 1, 0, 0, 0,
1, 1, 1, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0,
1, 1, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0,
1, 1, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0,
1, 1, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0,
1, 1, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0,
1, 1, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0,
1, 1, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
- { { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0,
- 1, 1, 0, 0, 1, 0 } },
- { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 1, 1, 0, 0, 0, 0 } },
- { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 1, 1, 0, 0, 0, 0 } } } },
- { MN_vpdpwuud, 0xd2, 3, SPACE_0F38, None,
- { 0, 0, 0, 1, 0, 0, 0, 1, 0, 0, 1, 1, 1, 1, 1, 0, 0, 0, 0, 0,
- 0, 0, 0, 1, 1, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 },
- { { 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
- { { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0,
- 1, 1, 0, 0, 1, 0 } },
- { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 1, 1, 0, 0, 0, 0 } },
- { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 1, 1, 0, 0, 0, 0 } } } },
- { MN_vpdpwuuds, 0xd3, 3, SPACE_0F38, None,
- { 0, 0, 0, 1, 0, 0, 0, 1, 0, 0, 1, 1, 1, 1, 1, 0, 0, 0, 0, 0,
- 0, 0, 0, 1, 1, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 },
- { { 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
- { { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0,
- 1, 1, 0, 0, 1, 0 } },
- { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 1, 1, 0, 0, 0, 0 } },
- { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 1, 1, 0, 0, 0, 0 } } } },
- { MN_vpdpwusd, 0xd2, 3, SPACE_0F38, None,
- { 0, 0, 0, 1, 0, 0, 0, 1, 0, 0, 1, 1, 1, 1, 1, 0, 0, 0, 0, 0,
- 0, 0, 0, 1, 1, 1, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 },
- { { 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
- { { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0,
- 1, 1, 0, 0, 1, 0 } },
- { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 1, 1, 0, 0, 0, 0 } },
- { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 1, 1, 0, 0, 0, 0 } } } },
- { MN_vpdpwusds, 0xd3, 3, SPACE_0F38, None,
- { 0, 0, 0, 1, 0, 0, 0, 1, 0, 0, 1, 1, 1, 1, 1, 0, 0, 0, 0, 0,
- 0, 0, 0, 1, 1, 1, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 },
- { { 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
- { { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0,
- 1, 1, 0, 0, 1, 0 } },
- { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 1, 1, 0, 0, 0, 0 } },
- { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 1, 1, 0, 0, 0, 0 } } } },
- { MN_vpdpwsud, 0xd2, 3, SPACE_0F38, None,
- { 0, 0, 0, 1, 0, 0, 0, 1, 0, 0, 1, 1, 1, 1, 1, 0, 0, 0, 0, 0,
- 0, 0, 0, 1, 1, 1, 2, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 },
- { { 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
- { { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0,
- 1, 1, 0, 0, 1, 0 } },
- { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 1, 1, 0, 0, 0, 0 } },
- { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 1, 1, 0, 0, 0, 0 } } } },
- { MN_vpdpwsuds, 0xd3, 3, SPACE_0F38, None,
- { 0, 0, 0, 1, 0, 0, 0, 1, 0, 0, 1, 1, 1, 1, 1, 0, 0, 0, 0, 0,
- 0, 0, 0, 1, 1, 1, 2, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 },
- { { 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0,
1, 1, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
+ 0, 0, 0, 0, 0, 0, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0,
1, 1, 1, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
+ 0, 0, 0, 0, 0, 0, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0,
1, 1, 1, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
+ 0, 0, 0, 0, 0, 0, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0,
1, 1, 1, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0, 0, 0, 0, 0 } },
{ { { 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0 } } } },
{ MN_invlpgb, 0x01fe, 3, SPACE_0F, None,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0, 0, 0, 0, 0 } },
{ { { 0, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 0, 1, 0,
0, 0, 0, 0, 0, 0 } },
{ { 0, 2, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0, 0, 0, 0 } },
{ { { 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0 } } } },
{ MN_clzero, 0x01fc, 0, SPACE_0F, None,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0 } } } },
{ MN_clzero, 0x01fc, 1, SPACE_0F, None,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 0, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 0, 1, 0,
0, 0, 0, 0, 0, 0 } } } },
{ MN_monitorx, 0x01fa, 0, SPACE_0F, None,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0 } } } },
{ MN_monitorx, 0x01fa, 3, SPACE_0F, None,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 0, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 0, 1, 0,
0, 0, 0, 0, 0, 0 } },
{ { 0, 2, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 1, 0, 0 } },
+ 0, 0, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0 } },
{ { { 0, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 1, 0,
0, 0, 0, 0, 0, 0 } },
{ { 0, 2, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0 } } } },
{ MN_mwaitx, 0x01fb, 3, SPACE_0F, None,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 0, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 1, 0,
0, 0, 0, 0, 0, 0 } },
{ { 0, 2, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 1, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0 } } } },
{ MN_wrpkru, 0x01ef, 0, SPACE_0F, None,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0 } } } },
{ MN_rdpid, 0xc7, 1, SPACE_0F, 7,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 1, 0 } },
+ 0, 0, 0, 0, 0, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0 } },
{ { { 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0, 0,
0, 0, 0, 0, 0, 0 } } } },
{ MN_rdpid, 0xc7, 1, SPACE_0F, 7,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 1, 0, 0 } },
+ 0, 0, 0, 0, 0, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0 } },
{ { { 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0,
0, 0, 0, 0, 0, 0 } } } },
{ MN_ptwrite, 0xae, 1, SPACE_0F, 4,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 1, 0 } },
+ 0, 0, 0, 0, 0, 0, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0 } },
{ { { 1, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 1, 0, 0, 0,
0, 0, 0, 0, 1, 0 } } } },
{ MN_ptwrite, 0xae, 1, SPACE_0F, 4,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 1, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0 } },
{ { { 1, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 1, 0, 1, 0, 0, 1, 0, 1, 0,
0, 0, 0, 0, 1, 0 } } } },
{ MN_incsspd, 0xae, 1, SPACE_0F, 5,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0, 0,
0, 0, 0, 0, 0, 0 } } } },
{ MN_incsspq, 0xae, 1, SPACE_0F, 5,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 1, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0 } },
{ { { 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0,
0, 0, 0, 0, 0, 0 } } } },
{ MN_rdsspd, 0x1e, 1, SPACE_0F, 1,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0, 0,
0, 0, 0, 0, 0, 0 } } } },
{ MN_rdsspq, 0x1e, 1, SPACE_0F, 1,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 1, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0 } },
{ { { 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0,
0, 0, 0, 0, 0, 0 } } } },
{ MN_saveprevssp, 0x01ea, 0, SPACE_0F, None,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0 } } } },
{ MN_rstorssp, 0x01, 1, SPACE_0F, 5,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 1, 0,
0, 0, 0, 0, 1, 0 } } } },
{ MN_wrssd, 0xf6, 2, SPACE_0F38, None,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0, 0,
0, 0, 0, 0, 0, 0 } },
{ { 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 1, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 1, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0 } },
{ { { 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0,
0, 0, 0, 0, 0, 0 } },
{ { 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 1, 0, 1, 0, 0, 0, 0, 1, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0, 0,
0, 0, 0, 0, 0, 0 } },
{ { 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 1, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 1, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0 } },
{ { { 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0,
0, 0, 0, 0, 0, 0 } },
{ { 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 1, 0, 1, 0, 0, 0, 0, 1, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0 } } } },
{ MN_clrssbsy, 0xae, 1, SPACE_0F, 6,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 1, 0,
0, 0, 0, 0, 1, 0 } } } },
{ MN_endbr64, 0x1efa, 0, SPACE_0F, None,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0 } } } },
{ MN_endbr32, 0x1efb, 0, SPACE_0F, None,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0 } } } },
{ MN_notrack, 0x3e, 0, SPACE_BASE, None,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0 } } } },
{ MN_wbnoinvd, 0x09, 0, SPACE_0F, None,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0,
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0 } } } },
{ MN_pconfig, 0x01c5, 0, SPACE_0F, None,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
- { { { 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0 } } } },
- { MN_pbndkb, 0x01c7, 0, SPACE_0F, None,
- { 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 1, 1, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 },
- { { 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 1, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0,
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0 } } } },
{ MN_umonitor, 0xae, 1, SPACE_0F, 6,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1,
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 0, 1, 0,
0, 0, 0, 0, 0, 0 } } } },
{ MN_tpause, 0xae, 1, SPACE_0F, 6,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1,
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0, 0,
0, 0, 0, 0, 0, 0 } } } },
{ MN_tpause, 0xae, 3, SPACE_0F, 6,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1,
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0, 0,
0, 0, 0, 0, 0, 0 } },
{ { 0, 3, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1,
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0, 0,
0, 0, 0, 0, 0, 0 } } } },
{ MN_umwait, 0xae, 3, SPACE_0F, 6,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1,
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0, 0,
0, 0, 0, 0, 0, 0 } },
{ { 0, 3, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0 } } } },
{ MN_movdiri, 0xf9, 2, SPACE_0F38, None,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 1, 0,
0, 0, 0, 0, 0, 0 } },
{ { 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 1, 0, 1, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 1, 0 } },
{ { 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 0, 1, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
+ 0, 0, 0, 0, 0, 0, 0, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 1, 0, 0, 0,
1, 1, 1, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
+ 0, 0, 0, 0, 0, 0, 0, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 1, 0, 0, 0,
0, 0, 1, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
+ 0, 0, 0, 0, 0, 0, 0, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 1, 0, 0, 0,
1, 1, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
+ 0, 0, 0, 0, 0, 0, 0, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 1, 0, 0, 0,
1, 1, 0, 0, 0, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0,
1, 1, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
1, 1, 0, 0, 0, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
+ 0, 0, 0, 0, 0, 0, 0, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 1, 0, 0, 0,
1, 0, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0,
1, 0, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
+ 0, 0, 0, 0, 0, 0, 0, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 1, 0, 0, 0,
0, 1, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0,
0, 1, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
+ 0, 0, 0, 0, 0, 0, 0, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 1, 0, 0, 0,
1, 1, 1, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 1, 0, 0, 0, 0,
0, 0, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 1, 0, 0, 0, 0,
0, 0, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0,
1, 1, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0,
1, 1, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0,
1, 1, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0,
1, 1, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 1, 0 } },
{ { 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 0, 1, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 1, 0 } },
{ { 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 0, 1, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
+ 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 1, 0, 0, 0,
1, 1, 1, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
+ 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 1, 0,
1, 1, 1, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0 } } } },
{ MN_psmash, 0x01ff, 0, SPACE_0F, None,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 1, 0, 1, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 1, 0, 0 } },
{ { { 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0 } } } },
{ MN_psmash, 0x01ff, 1, SPACE_0F, None,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 1, 0, 1, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 1, 0, 0 } },
{ { { 0, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 1, 0,
0, 0, 0, 0, 0, 0 } } } },
{ MN_pvalidate, 0x01ff, 0, SPACE_0F, None,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 1, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0, 0, 0 } },
{ { { 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0 } } } },
{ MN_pvalidate, 0x01ff, 3, SPACE_0F, None,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 1, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0, 0, 0 } },
{ { { 0, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 0, 1, 0,
0, 0, 0, 0, 0, 0 } },
{ { 0, 2, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 1, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0, 0, 0 } },
{ { { 0, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 0, 1, 0,
0, 0, 0, 0, 0, 0 } } } },
{ MN_rmpupdate, 0x01fe, 0, SPACE_0F, None,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 1, 0, 1, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 1, 0, 0 } },
{ { { 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0 } } } },
{ MN_rmpupdate, 0x01fe, 2, SPACE_0F, None,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 1, 0, 1, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 1, 0, 0 } },
{ { { 0, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 1, 0,
0, 0, 0, 0, 0, 0 } },
{ { 0, 2, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 1, 0, 1, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 1, 0, 0 } },
{ { { 0, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 1, 0,
0, 0, 0, 0, 0, 0 } } } },
{ MN_rmpadjust, 0x01fe, 0, SPACE_0F, None,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 1, 0, 1, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 1, 0, 0 } },
{ { { 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0 } } } },
{ MN_rmpadjust, 0x01fe, 3, SPACE_0F, None,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 1, 0, 1, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 1, 0, 0 } },
{ { { 0, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 1, 0,
0, 0, 0, 0, 0, 0 } },
{ { 0, 2, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 1, 0, 1, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 1, 0, 0 } },
{ { { 0, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 1, 0,
0, 0, 0, 0, 0, 0 } } } },
{ MN_rmpquery, 0x01fd, 0, SPACE_0F, None,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 1, 1, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 0, 0 } },
{ { { 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0 } } } },
{ MN_rmpquery, 0x01fd, 3, SPACE_0F, None,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 1, 1, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 0, 0 } },
{ { { 0, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 1, 0,
0, 0, 0, 0, 0, 0 } },
{ { 0, 2, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0 } } } },
{ MN_serialize, 0x01e8, 0, SPACE_0F, None,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0 } } } },
{ MN_xsusldtrk, 0x01e8, 0, SPACE_0F, None,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0 } } } },
{ MN_xresldtrk, 0x01e9, 0, SPACE_0F, None,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0 } } } },
{ MN_ldtilecfg, 0x49, 1, SPACE_0F38, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 1, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0, 0, 0, 0, 0,
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0 } },
{ { { 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 1, 0, 1, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 1, 0 } } } },
{ MN_sttilecfg, 0x49, 1, SPACE_0F38, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 1, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0, 0, 0, 0, 0,
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0 } },
{ { { 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 1, 0, 1, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 1, 0 } } } },
{ MN_tcmmimfp16ps, 0x6c, 3, SPACE_0F38, None,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 1, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0, 0, 0, 0, 0, 0,
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 1, 0, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 1, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0, 0, 0, 0, 0, 0,
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 1, 0, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 1, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0,
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 1, 0, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 1, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0, 0, 0, 0, 0, 0, 0,
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 1, 0, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 1, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 1, 0, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 1, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 1, 0, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 1, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 1, 0, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 1, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 1, 0, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 1, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0, 0, 0, 0, 0,
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0 } },
{ { { 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 1, 0, 1, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 1, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0, 0, 0, 0, 0,
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0 } },
{ { { 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 1, 0, 1, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 1, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0, 0, 0, 0, 0,
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 1, 0, 0 } },
{ { 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 1, 0, 1, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 1, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0, 0, 0, 0, 0,
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0 } },
{ { { 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0 } } } },
{ MN_tilezero, 0x49, 1, SPACE_0F38, None,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 1, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0, 0, 0, 0, 0,
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 1, 0, 0 } } } },
{ MN_loadiwkey, 0xdc, 2, SPACE_0F38, None,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
1, 0, 0, 0, 0, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0, 0,
0, 0, 0, 0, 0, 0 } },
{ { 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0, 0,
0, 0, 0, 0, 0, 0 } },
{ { 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 1, 0 } } } },
{ MN_aesdecwide128kl, 0xd8, 1, SPACE_0F38, 1,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 1, 0 } } } },
{ MN_aesencwide256kl, 0xd8, 1, SPACE_0F38, 2,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 1, 0 } } } },
{ MN_aesdecwide256kl, 0xd8, 1, SPACE_0F38, 3,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 1, 0 } } } },
{ MN_tdcall, 0x01cc, 0, SPACE_0F, None,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0 } } } },
{ MN_seamret, 0x01cd, 0, SPACE_0F, None,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 1, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0 } },
{ { { 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0 } } } },
{ MN_seamops, 0x01ce, 0, SPACE_0F, None,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 1, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0 } },
{ { { 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0 } } } },
{ MN_seamcall, 0x01cf, 0, SPACE_0F, None,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 1, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0 } },
{ { { 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0 } } } },
{ MN_uiret, 0x01ec, 0, SPACE_0F, None,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 1, 0, 0 } },
+ 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0 } },
{ { { 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0 } } } },
{ MN_clui, 0x01ee, 0, SPACE_0F, None,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 1, 0, 0 } },
+ 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0 } },
{ { { 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0 } } } },
{ MN_stui, 0x01ef, 0, SPACE_0F, None,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 1, 0, 0 } },
+ 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0 } },
{ { { 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0 } } } },
{ MN_testui, 0x01ed, 0, SPACE_0F, None,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 1, 0, 0 } },
+ 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0 } },
{ { { 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0 } } } },
{ MN_senduipi, 0xc7, 1, SPACE_0F, 6,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 1, 0, 0 } },
+ 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0 } },
{ { { 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0,
0, 0, 0, 0, 0, 0 } } } },
{ MN_hreset, 0xf0c0, 1, SPACE_0F3A, None,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 0, 0, 0, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0 } } } },
{ MN_vfcmaddcph, 0x56, 3, SPACE_EVEXMAP6, None,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 1, 0, 0, 0,
1, 1, 1, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 1, 0, 0, 0,
1, 0, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 1, 0, 0, 0,
1, 1, 1, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 1, 0, 0, 0,
1, 0, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 1, 0, 0, 0,
1, 1, 1, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 1, 0, 0, 0,
1, 0, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 1, 0, 0, 0,
1, 1, 1, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 1, 0, 0, 0,
1, 0, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 1, 0, 0, 0, 0,
1, 1, 1, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 1, 0, 0, 0, 0,
1, 1, 1, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 1, 0, 0, 0, 0,
1, 1, 1, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 1, 0, 0, 0, 0,
1, 1, 1, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 1, 0, 0, 0, 0,
1, 1, 1, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 1, 0, 0, 0, 0,
1, 1, 1, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 1, 0, 0, 0, 0,
1, 1, 1, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 1, 0, 0, 0, 0,
1, 1, 1, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 1, 0, 0, 0, 0,
1, 1, 1, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 1, 0, 0, 0, 0,
1, 1, 1, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 1, 0, 0, 0, 0,
1, 1, 1, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 1, 0, 0, 0, 0,
1, 1, 1, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 1, 0, 0, 0, 0,
1, 1, 1, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 1, 0, 0, 0, 0,
1, 1, 1, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 1, 0, 0, 0, 0,
1, 1, 1, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 1, 0, 0, 0, 0,
1, 1, 1, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 1, 0, 0, 0, 0,
1, 1, 1, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 1, 0, 0, 0, 0,
1, 1, 1, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 1, 0, 0, 0, 0,
1, 1, 1, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 1, 0, 0, 0, 0,
1, 1, 1, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 1, 0, 0, 0, 0,
1, 1, 1, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 1, 0, 0, 0, 0,
1, 1, 1, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 1, 0, 0, 0, 0,
1, 1, 1, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 1, 0, 0, 0, 0,
1, 1, 1, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 1, 0, 0, 0, 0,
1, 1, 1, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 1, 0, 0, 0, 0,
1, 1, 1, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 1, 0, 0, 0, 0,
1, 1, 1, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 1, 0, 0, 0, 0,
1, 1, 1, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 1, 0, 0, 0, 0,
1, 1, 1, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 1, 0, 0, 0, 0,
1, 1, 1, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 1, 0, 0, 0, 0,
1, 1, 1, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 1, 0, 0, 0, 0,
1, 1, 1, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 1, 0, 0, 0, 0,
1, 1, 1, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 1, 0, 0, 0, 0,
1, 1, 1, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 1, 0, 0, 0, 0,
1, 1, 1, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 1, 0, 0, 0, 0,
1, 1, 1, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 1, 0, 0, 0, 0,
1, 1, 1, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 1, 0, 0, 0, 0,
1, 1, 1, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 1, 0, 0, 0, 0,
1, 1, 1, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 1, 0, 0, 0, 0,
1, 1, 1, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 1, 0, 0, 0, 0,
1, 1, 1, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 1, 0, 0, 0, 0,
1, 1, 1, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 1, 0, 0, 0, 0,
1, 1, 1, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 1, 0, 0, 0, 0,
1, 1, 1, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 1, 0, 0, 0, 0,
1, 1, 1, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 1, 0, 0, 0, 0,
1, 1, 1, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 0, 0, 0, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 1, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 1, 0, 0, 0, 0,
1, 0, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 1, 0, 0, 0, 0,
1, 0, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 1, 0, 0, 0, 0,
1, 0, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 1, 0, 0, 0, 0,
1, 0, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 1, 0, 0, 0, 0,
1, 0, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 1, 0, 0, 0, 0,
1, 0, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 1, 0, 0, 0, 0,
1, 0, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 1, 0, 0, 0, 0,
1, 0, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 1, 0, 0, 0, 0,
1, 0, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 1, 0, 0, 0, 0,
1, 0, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 1, 0, 0, 0, 0,
1, 0, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 1, 0, 0, 0, 0,
1, 0, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 1, 0, 0, 0, 0,
1, 0, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 1, 0, 0, 0, 0,
1, 0, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 1, 0, 0, 0, 0,
1, 0, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 1, 0, 0, 0, 0,
1, 0, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 1, 0, 0, 0, 0,
1, 0, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 1, 0, 0, 0, 0,
1, 0, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 1, 0, 0, 0, 0,
1, 0, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 1, 0, 0, 0, 0,
1, 0, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 1, 0, 0, 0, 0,
1, 0, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 1, 0, 0, 0, 0,
1, 0, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 1, 0, 0, 0, 0,
1, 0, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 1, 0, 0, 0, 0,
1, 0, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 1, 0, 0, 0, 0,
1, 0, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 1, 0, 0, 0, 0,
1, 0, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 1, 0, 0, 0, 0,
1, 0, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 1, 0, 0, 0, 0,
1, 0, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 1, 0, 0, 0, 0,
1, 0, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 1, 0, 0, 0, 0,
1, 0, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 1, 0, 0, 0, 0,
1, 0, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 1, 0, 0, 0, 0,
1, 0, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 1, 0, 0, 0, 0,
1, 0, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 1, 0, 0, 0, 0,
1, 0, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 1, 0, 0, 0, 0,
1, 0, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 1, 0, 0, 0, 0,
1, 0, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 1, 0, 0, 0, 0,
1, 0, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 1, 0, 0, 0, 0,
1, 0, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 1, 0, 0, 0, 0,
1, 0, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 1, 0, 0, 0, 0,
1, 0, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 1, 0, 0, 0, 0,
1, 0, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 1, 0, 0, 0, 0,
1, 0, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 1, 0, 0, 0, 0,
1, 0, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 1, 0, 0, 0, 0,
1, 0, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 1, 0, 0, 0, 0,
1, 0, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 1, 0, 0, 0, 0,
1, 0, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 0, 0, 0, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 1, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 1, 0, 0, 0,
0, 0, 1, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 1, 0, 0, 0,
1, 1, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 1, 0, 0, 0,
1, 1, 0, 0, 0, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 1, 0, 0, 0,
1, 0, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 1, 0, 0, 0,
0, 1, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 1, 0, 0, 0,
0, 0, 1, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 1, 0, 0, 0,
1, 1, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 1, 0, 0, 0,
1, 1, 0, 0, 0, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 1, 0, 0, 0,
1, 0, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 1, 0, 0, 0,
0, 1, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 1, 0,
1, 1, 1, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 1, 0,
1, 1, 1, 0, 0, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 1, 0,
0, 0, 1, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 1, 0,
1, 0, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 1, 0,
0, 1, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 1, 0,
1, 1, 1, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 1, 0,
1, 1, 1, 0, 0, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 1, 0,
0, 0, 1, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 1, 0,
1, 0, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 1, 0,
0, 1, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 1, 0,
1, 1, 1, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 1, 0,
1, 1, 1, 0, 0, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 1, 0,
0, 0, 1, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 1, 0,
1, 0, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 1, 0,
0, 1, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 1, 0, 0, 0,
0, 0, 1, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 1, 0, 0, 0,
1, 1, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 1, 0, 0, 0,
1, 1, 0, 0, 0, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 1, 0, 0, 0,
1, 0, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 1, 0, 0, 0,
0, 1, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 1, 0, 0, 0, 0,
1, 1, 1, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 1, 0, 0, 0, 0,
1, 1, 1, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 1, 0, 0, 1, 0,
1, 0, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 1, 0, 0, 0, 0,
1, 0, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 1, 0, 0, 0, 0,
0, 1, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 1, 0, 0, 1, 0,
1, 0, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 1, 0, 0, 0, 0,
1, 0, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 1, 0, 0, 0, 0,
0, 1, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 1, 1, 0, 0, 0,
1, 0, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 1, 0, 0, 1, 0,
1, 0, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 1, 0, 0, 0, 0,
1, 0, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 1, 1, 0, 0, 0,
1, 0, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 1, 0, 0, 1, 0,
1, 0, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 1, 0, 0, 0, 0,
1, 0, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 1, 1, 0, 0, 0,
1, 0, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 1, 0, 0, 1, 0,
1, 0, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 1, 0, 0, 0, 0,
1, 0, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 1, 0, 0, 0, 0,
1, 1, 1, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 1, 0, 0, 0, 0,
1, 1, 1, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 1, 0,
1, 0, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 1, 0, 0, 0,
1, 0, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 1, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 1, 0, 1, 0,
0, 0, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 1, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 1, 0, 1, 0,
0, 0, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 1, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 1, 0, 1, 0,
0, 0, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 1, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 1, 0, 1, 0,
0, 0, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 1, 0, 0, 0, 0,
1, 0, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 1, 0, 0, 0, 0,
1, 0, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 1, 0, 0, 0, 0,
1, 0, 0, 0, 1, 0 } },
{ { 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 1, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 1, 0, 0, 1, 0,
1, 0, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 1, 0, 0, 0, 0,
1, 0, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 1, 0, 0, 0, 0,
0, 1, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 1, 0, 0, 1, 0,
1, 0, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 1, 0, 0, 0, 0,
1, 0, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 1, 0, 0, 0, 0,
0, 1, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 1, 1, 0, 0, 0,
1, 0, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 1, 0, 0, 1, 0,
1, 0, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 1, 0, 0, 0, 0,
1, 0, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 1, 1, 0, 0, 0,
1, 0, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 1, 0, 0, 1, 0,
1, 0, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 1, 0, 0, 0, 0,
1, 0, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 1, 0, 0, 1, 0,
1, 0, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 1, 0, 0, 0, 0,
1, 0, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 1, 0, 0, 0, 0,
0, 1, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 1, 0, 0, 0, 0,
1, 1, 1, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 1, 0, 0, 0, 0,
1, 1, 1, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 1, 0, 0, 0, 0,
1, 0, 0, 0, 1, 0 } },
{ { 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 1, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 0, 0, 0, 1, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 1, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 0, 0, 0, 1, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 1, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 0, 0, 0, 1, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 1, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 0, 0, 0, 1, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 1, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 0, 0, 0, 1, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 1, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 1, 0, 0, 0, 0,
0, 0, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
1, 0, 0, 0, 0, 0 } },
{ { 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 1, 0, 0, 0, 0,
1, 1, 1, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 1, 0, 0, 0, 0,
1, 0, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 1, 0, 0, 0, 0,
1, 1, 1, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 7, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 1, 0, 0, 0, 0,
1, 0, 0, 0, 1, 0 } },
{ { 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 1, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0 } },
{ { { 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 1, 0, 1, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0 } } } },
{ MN_prefetchit1, 0x18, 1, SPACE_0F, 6,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 1, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0 } },
{ { { 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 1, 0, 1, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0 } } } },
{ MN_cmpoxadd, 0xe0, 3, SPACE_0F38, None,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 1, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0 } },
{ { { 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 1, 0,
0, 0, 0, 0, 0, 0 } },
{ { 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 1, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 1, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0 } },
{ { { 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 1, 0,
0, 0, 0, 0, 0, 0 } },
{ { 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 1, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 1, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0 } },
{ { { 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 1, 0,
0, 0, 0, 0, 0, 0 } },
{ { 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 1, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 1, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0 } },
{ { { 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 1, 0,
0, 0, 0, 0, 0, 0 } },
{ { 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 1, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 1, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0 } },
{ { { 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 1, 0,
0, 0, 0, 0, 0, 0 } },
{ { 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 1, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 1, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0 } },
{ { { 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 1, 0,
0, 0, 0, 0, 0, 0 } },
{ { 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 1, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 1, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0 } },
{ { { 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 1, 0,
0, 0, 0, 0, 0, 0 } },
{ { 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 1, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 1, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0 } },
{ { { 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 1, 0,
0, 0, 0, 0, 0, 0 } },
{ { 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 1, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 1, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0 } },
{ { { 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 1, 0,
0, 0, 0, 0, 0, 0 } },
{ { 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 1, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 1, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0 } },
{ { { 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 1, 0,
0, 0, 0, 0, 0, 0 } },
{ { 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 1, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 1, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0 } },
{ { { 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 1, 0,
0, 0, 0, 0, 0, 0 } },
{ { 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 1, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 1, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0 } },
{ { { 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 1, 0,
0, 0, 0, 0, 0, 0 } },
{ { 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 1, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 1, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0 } },
{ { { 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 1, 0,
0, 0, 0, 0, 0, 0 } },
{ { 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 1, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 1, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0 } },
{ { { 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 1, 0,
0, 0, 0, 0, 0, 0 } },
{ { 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 1, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 1, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0 } },
{ { { 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 1, 0,
0, 0, 0, 0, 0, 0 } },
{ { 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 1, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 1, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0 } },
{ { { 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 1, 0,
0, 0, 0, 0, 0, 0 } },
{ { 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 1, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 1, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0 } },
{ { { 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 1, 0,
0, 0, 0, 0, 0, 0 } },
{ { 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 1, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 1, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0 } },
{ { { 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 1, 0,
0, 0, 0, 0, 0, 0 } },
{ { 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 1, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 1, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0 } },
{ { { 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 1, 0,
0, 0, 0, 0, 0, 0 } },
{ { 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 1, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 1, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0 } },
{ { { 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 1, 0,
0, 0, 0, 0, 0, 0 } },
{ { 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 1, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 1, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0 } },
{ { { 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 1, 0,
0, 0, 0, 0, 0, 0 } },
{ { 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 1, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 1, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0 } },
{ { { 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 1, 0,
0, 0, 0, 0, 0, 0 } },
{ { 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 1, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 1, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0 } },
{ { { 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 1, 0,
0, 0, 0, 0, 0, 0 } },
{ { 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 1, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 1, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0 } },
{ { { 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 1, 0,
0, 0, 0, 0, 0, 0 } },
{ { 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 1, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 1, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0 } },
{ { { 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 1, 0,
0, 0, 0, 0, 0, 0 } },
{ { 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 1, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 1, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0 } },
{ { { 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 1, 0,
0, 0, 0, 0, 0, 0 } },
{ { 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 1, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 1, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0 } },
{ { { 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 1, 0,
0, 0, 0, 0, 0, 0 } },
{ { 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 1, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 1, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0 } },
{ { { 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 1, 0,
0, 0, 0, 0, 0, 0 } },
{ { 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 1, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 1, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0 } },
{ { { 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 1, 0,
0, 0, 0, 0, 0, 0 } },
{ { 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 1, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 1, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0 } },
{ { { 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 1, 0,
0, 0, 0, 0, 0, 0 } },
{ { 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 1, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0 } } } },
{ MN_rdmsrlist, 0x01c6, 0, SPACE_0F, None,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 1, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0 } },
{ { { 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0 } } } },
{ MN_wrmsrlist, 0x01c6, 0, SPACE_0F, None,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 1, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0 } },
{ { { 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0 } } } },
{ MN_aadd, 0xfc, 2, SPACE_0F38, None,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 1, 0,
0, 0, 0, 0, 0, 0 } },
{ { 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 1, 0, 1, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 1, 0,
0, 0, 0, 0, 0, 0 } },
{ { 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 1, 0, 1, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 1, 0,
0, 0, 0, 0, 0, 0 } },
{ { 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 1, 0, 1, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0 } },
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } },
{ { { 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 1, 0,
0, 0, 0, 0, 0, 0 } },
{ { 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 1, 0, 1, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 1, 0, 0 } },
+ 0, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0 } },
{ { { 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 0, 1, 0,
0, 0, 0, 0, 0, 0 } } } },
{ MN_lkgs, 0x00, 1, SPACE_0F, 6,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 1, 0, 0 } },
+ 0, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0 } },
{ { { 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 1, 0, 1, 0, 1, 0, 0, 0, 0,
0, 0, 0, 0, 1, 0 } } } },
{ MN_erets, 0x01ca, 0, SPACE_0F, None,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 1, 0, 0 } },
+ 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0 } },
{ { { 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0 } } } },
{ MN_eretu, 0x01ca, 0, SPACE_0F, None,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 1, 0, 0 } },
+ 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0 } },
{ { { 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0 } } } },
};
i386_optab + 2938,
i386_optab + 2939,
i386_optab + 2940,
- i386_optab + 2941,
- i386_optab + 2942,
i386_optab + 2943,
- i386_optab + 2944,
- i386_optab + 2945,
i386_optab + 2946,
i386_optab + 2947,
i386_optab + 2948,
+ i386_optab + 2949,
+ i386_optab + 2950,
i386_optab + 2951,
+ i386_optab + 2952,
+ i386_optab + 2953,
i386_optab + 2954,
i386_optab + 2955,
i386_optab + 2956,
i386_optab + 2998,
i386_optab + 2999,
i386_optab + 3000,
- i386_optab + 3001,
- i386_optab + 3002,
i386_optab + 3003,
- i386_optab + 3004,
i386_optab + 3005,
- i386_optab + 3006,
- i386_optab + 3007,
i386_optab + 3008,
i386_optab + 3011,
i386_optab + 3013,
i386_optab + 3016,
i386_optab + 3019,
- i386_optab + 3021,
- i386_optab + 3024,
- i386_optab + 3027,
+ i386_optab + 3022,
+ i386_optab + 3025,
+ i386_optab + 3026,
+ i386_optab + 3029,
i386_optab + 3030,
+ i386_optab + 3031,
+ i386_optab + 3032,
i386_optab + 3033,
i386_optab + 3034,
- i386_optab + 3037,
i386_optab + 3038,
- i386_optab + 3039,
i386_optab + 3040,
- i386_optab + 3041,
- i386_optab + 3042,
+ i386_optab + 3043,
+ i386_optab + 3044,
+ i386_optab + 3045,
i386_optab + 3046,
+ i386_optab + 3047,
i386_optab + 3048,
+ i386_optab + 3049,
+ i386_optab + 3050,
i386_optab + 3051,
i386_optab + 3052,
i386_optab + 3053,
i386_optab + 3126,
i386_optab + 3127,
i386_optab + 3128,
- i386_optab + 3129,
i386_optab + 3130,
i386_optab + 3131,
i386_optab + 3132,
i386_optab + 3134,
i386_optab + 3135,
i386_optab + 3136,
+ i386_optab + 3137,
i386_optab + 3138,
i386_optab + 3139,
i386_optab + 3140,
i386_optab + 3167,
i386_optab + 3168,
i386_optab + 3169,
- i386_optab + 3170,
- i386_optab + 3171,
i386_optab + 3172,
- i386_optab + 3173,
- i386_optab + 3174,
i386_optab + 3175,
- i386_optab + 3176,
- i386_optab + 3177,
- i386_optab + 3180,
- i386_optab + 3183,
- i386_optab + 3186,
- i386_optab + 3189,
- i386_optab + 3192,
- i386_optab + 3195,
- i386_optab + 3198,
- i386_optab + 3201,
- i386_optab + 3204,
- i386_optab + 3207,
- i386_optab + 3210,
- i386_optab + 3213,
+ i386_optab + 3178,
+ i386_optab + 3181,
+ i386_optab + 3184,
+ i386_optab + 3187,
+ i386_optab + 3190,
+ i386_optab + 3193,
+ i386_optab + 3196,
+ i386_optab + 3199,
+ i386_optab + 3202,
+ i386_optab + 3205,
+ i386_optab + 3208,
+ i386_optab + 3211,
+ i386_optab + 3214,
+ i386_optab + 3215,
i386_optab + 3216,
- i386_optab + 3219,
+ i386_optab + 3217,
+ i386_optab + 3218,
+ i386_optab + 3220,
+ i386_optab + 3221,
i386_optab + 3222,
i386_optab + 3223,
i386_optab + 3224,
i386_optab + 3225,
i386_optab + 3226,
+ i386_optab + 3227,
i386_optab + 3228,
i386_optab + 3229,
i386_optab + 3230,
i386_optab + 3279,
i386_optab + 3280,
i386_optab + 3281,
- i386_optab + 3282,
- i386_optab + 3283,
i386_optab + 3284,
- i386_optab + 3285,
- i386_optab + 3286,
i386_optab + 3287,
i386_optab + 3288,
i386_optab + 3289,
+ i386_optab + 3290,
+ i386_optab + 3291,
i386_optab + 3292,
+ i386_optab + 3293,
+ i386_optab + 3294,
i386_optab + 3295,
i386_optab + 3296,
i386_optab + 3297,
i386_optab + 3347,
i386_optab + 3348,
i386_optab + 3349,
- i386_optab + 3350,
- i386_optab + 3351,
i386_optab + 3352,
- i386_optab + 3353,
- i386_optab + 3354,
i386_optab + 3355,
- i386_optab + 3356,
- i386_optab + 3357,
+ i386_optab + 3358,
+ i386_optab + 3359,
i386_optab + 3360,
+ i386_optab + 3361,
+ i386_optab + 3362,
i386_optab + 3363,
+ i386_optab + 3364,
+ i386_optab + 3365,
i386_optab + 3366,
i386_optab + 3367,
i386_optab + 3368,
i386_optab + 3372,
i386_optab + 3373,
i386_optab + 3374,
- i386_optab + 3375,
- i386_optab + 3376,
i386_optab + 3377,
- i386_optab + 3378,
- i386_optab + 3379,
i386_optab + 3380,
i386_optab + 3381,
i386_optab + 3382,
i386_optab + 3385,
+ i386_optab + 3386,
+ i386_optab + 3387,
i386_optab + 3388,
i386_optab + 3389,
- i386_optab + 3390,
- i386_optab + 3393,
- i386_optab + 3394,
+ i386_optab + 3392,
i386_optab + 3395,
- i386_optab + 3396,
- i386_optab + 3397,
+ i386_optab + 3398,
+ i386_optab + 3399,
i386_optab + 3400,
+ i386_optab + 3401,
+ i386_optab + 3402,
i386_optab + 3403,
+ i386_optab + 3404,
+ i386_optab + 3405,
i386_optab + 3406,
i386_optab + 3407,
i386_optab + 3408,
- i386_optab + 3409,
i386_optab + 3410,
- i386_optab + 3411,
i386_optab + 3412,
i386_optab + 3413,
i386_optab + 3414,
i386_optab + 3415,
i386_optab + 3416,
+ i386_optab + 3417,
i386_optab + 3418,
+ i386_optab + 3419,
i386_optab + 3420,
i386_optab + 3421,
i386_optab + 3422,
i386_optab + 3435,
i386_optab + 3436,
i386_optab + 3437,
- i386_optab + 3438,
i386_optab + 3439,
- i386_optab + 3440,
i386_optab + 3441,
i386_optab + 3442,
i386_optab + 3443,
i386_optab + 3444,
i386_optab + 3445,
+ i386_optab + 3446,
i386_optab + 3447,
+ i386_optab + 3448,
i386_optab + 3449,
i386_optab + 3450,
i386_optab + 3451,
i386_optab + 3464,
i386_optab + 3465,
i386_optab + 3466,
- i386_optab + 3467,
i386_optab + 3468,
- i386_optab + 3469,
i386_optab + 3470,
- i386_optab + 3471,
i386_optab + 3472,
- i386_optab + 3473,
i386_optab + 3474,
+ i386_optab + 3475,
i386_optab + 3476,
+ i386_optab + 3477,
i386_optab + 3478,
+ i386_optab + 3479,
i386_optab + 3480,
+ i386_optab + 3481,
i386_optab + 3482,
i386_optab + 3483,
- i386_optab + 3484,
i386_optab + 3485,
i386_optab + 3486,
- i386_optab + 3487,
i386_optab + 3488,
- i386_optab + 3489,
- i386_optab + 3490,
i386_optab + 3491,
- i386_optab + 3492,
i386_optab + 3493,
i386_optab + 3494,
i386_optab + 3495,
- i386_optab + 3496,
i386_optab + 3497,
i386_optab + 3499,
i386_optab + 3500,
+ i386_optab + 3501,
i386_optab + 3502,
+ i386_optab + 3503,
+ i386_optab + 3504,
i386_optab + 3505,
+ i386_optab + 3506,
i386_optab + 3507,
i386_optab + 3508,
i386_optab + 3509,
+ i386_optab + 3510,
i386_optab + 3511,
+ i386_optab + 3512,
i386_optab + 3513,
i386_optab + 3514,
i386_optab + 3515,
i386_optab + 3516,
i386_optab + 3517,
- i386_optab + 3518,
i386_optab + 3519,
- i386_optab + 3520,
i386_optab + 3521,
i386_optab + 3522,
i386_optab + 3523,
i386_optab + 3524,
i386_optab + 3525,
- i386_optab + 3526,
- i386_optab + 3527,
- i386_optab + 3528,
- i386_optab + 3529,
i386_optab + 3530,
- i386_optab + 3531,
i386_optab + 3532,
i386_optab + 3534,
+ i386_optab + 3535,
i386_optab + 3536,
i386_optab + 3537,
i386_optab + 3538,
i386_optab + 3539,
i386_optab + 3540,
+ i386_optab + 3541,
+ i386_optab + 3542,
+ i386_optab + 3543,
+ i386_optab + 3544,
i386_optab + 3545,
- i386_optab + 3547,
- i386_optab + 3549,
- i386_optab + 3550,
+ i386_optab + 3546,
+ i386_optab + 3548,
i386_optab + 3551,
- i386_optab + 3552,
- i386_optab + 3553,
i386_optab + 3554,
- i386_optab + 3555,
- i386_optab + 3556,
i386_optab + 3557,
- i386_optab + 3558,
i386_optab + 3559,
i386_optab + 3560,
i386_optab + 3561,
+ i386_optab + 3562,
i386_optab + 3563,
+ i386_optab + 3564,
+ i386_optab + 3565,
i386_optab + 3566,
+ i386_optab + 3567,
+ i386_optab + 3568,
i386_optab + 3569,
+ i386_optab + 3570,
+ i386_optab + 3571,
i386_optab + 3572,
+ i386_optab + 3573,
i386_optab + 3574,
i386_optab + 3575,
i386_optab + 3576,
i386_optab + 3699,
i386_optab + 3700,
i386_optab + 3701,
- i386_optab + 3702,
- i386_optab + 3703,
i386_optab + 3704,
i386_optab + 3705,
i386_optab + 3706,
- i386_optab + 3707,
- i386_optab + 3708,
i386_optab + 3709,
i386_optab + 3710,
i386_optab + 3711,
- i386_optab + 3712,
i386_optab + 3713,
i386_optab + 3714,
i386_optab + 3715,
i386_optab + 3716,
+ i386_optab + 3718,
i386_optab + 3719,
i386_optab + 3720,
i386_optab + 3721,
+ i386_optab + 3723,
i386_optab + 3724,
i386_optab + 3725,
i386_optab + 3726,
- i386_optab + 3728,
i386_optab + 3729,
i386_optab + 3730,
i386_optab + 3731,
+ i386_optab + 3732,
i386_optab + 3733,
- i386_optab + 3734,
- i386_optab + 3735,
i386_optab + 3736,
- i386_optab + 3738,
i386_optab + 3739,
- i386_optab + 3740,
- i386_optab + 3741,
- i386_optab + 3744,
+ i386_optab + 3742,
i386_optab + 3745,
- i386_optab + 3746,
- i386_optab + 3747,
i386_optab + 3748,
+ i386_optab + 3749,
+ i386_optab + 3750,
i386_optab + 3751,
+ i386_optab + 3752,
i386_optab + 3754,
+ i386_optab + 3756,
i386_optab + 3757,
- i386_optab + 3760,
- i386_optab + 3763,
- i386_optab + 3764,
+ i386_optab + 3758,
+ i386_optab + 3759,
+ i386_optab + 3762,
i386_optab + 3765,
- i386_optab + 3766,
- i386_optab + 3767,
- i386_optab + 3769,
+ i386_optab + 3768,
i386_optab + 3771,
- i386_optab + 3772,
- i386_optab + 3773,
i386_optab + 3774,
+ i386_optab + 3775,
+ i386_optab + 3776,
i386_optab + 3777,
+ i386_optab + 3779,
i386_optab + 3780,
- i386_optab + 3783,
+ i386_optab + 3781,
+ i386_optab + 3782,
+ i386_optab + 3784,
+ i386_optab + 3785,
i386_optab + 3786,
+ i386_optab + 3787,
+ i386_optab + 3788,
i386_optab + 3789,
i386_optab + 3790,
i386_optab + 3791,
i386_optab + 3792,
+ i386_optab + 3793,
i386_optab + 3794,
i386_optab + 3795,
i386_optab + 3796,
i386_optab + 3797,
+ i386_optab + 3798,
i386_optab + 3799,
i386_optab + 3800,
i386_optab + 3801,
i386_optab + 3825,
i386_optab + 3826,
i386_optab + 3827,
- i386_optab + 3828,
i386_optab + 3829,
i386_optab + 3830,
i386_optab + 3831,
- i386_optab + 3832,
- i386_optab + 3833,
- i386_optab + 3834,
- i386_optab + 3835,
- i386_optab + 3836,
- i386_optab + 3837,
- i386_optab + 3838,
- i386_optab + 3839,
- i386_optab + 3840,
- i386_optab + 3841,
- i386_optab + 3842,
- i386_optab + 3844,
- i386_optab + 3845,
- i386_optab + 3846,
};
/* i386 mnemonics table. */
"\0""fld1"
"\0""ud1"
"\0""sha1msg1"
- "\0""vsha512msg1"
- "\0""vsm3msg1"
"\0""sha256msg1"
"\0""fprem1"
"\0""f2xm1"
"\0""ud2"
"\0""fldlg2"
"\0""sha1msg2"
- "\0""vsha512msg2"
- "\0""vsm3msg2"
"\0""sha256msg2"
"\0""fldln2"
- "\0""vsha512rnds2"
- "\0""vsm3rnds2"
"\0""sha256rnds2"
"\0""prefetcht2"
"\0""pfrcpit2"
"\0""vmovdqu64"
"\0""rex64"
"\0""sha1rnds4"
- "\0""vsm4rnds4"
"\0""vshuff32x4"
"\0""vextractf32x4"
"\0""vinsertf32x4"
"\0""vextracti64x4"
"\0""vinserti64x4"
"\0""vbroadcasti64x4"
- "\0""vsm4key4"
"\0""data16"
"\0""vcvtne2ps2bf16"
"\0""vcvtneps2bf16"
"\0""invlpgb"
"\0""vpavgb"
"\0""jb"
- "\0""pbndkb"
"\0""vpmovmskb"
"\0""vpshlb"
"\0""kshiftlb"
"\0""vbroadcastsd"
"\0""vpdpbusd"
"\0""tdpbusd"
- "\0""vpdpwusd"
"\0""vdivsd"
"\0""vmovsd"
"\0""vpmaxsd"
"\0""vpcmpequd"
"\0""vpdpbsud"
"\0""tdpbsud"
- "\0""vpdpwsud"
"\0""vpcomgtud"
"\0""vpcomltud"
"\0""vpcmpnltud"
"\0""vpcmpltud"
"\0""vpdpbuud"
"\0""tdpbuud"
- "\0""vpdpwuud"
"\0""vpmaxud"
"\0""vpsravd"
"\0""vpshldvd"
"\0""vp4dpwssds"
"\0""vpdpwssds"
"\0""vpdpbusds"
- "\0""vpdpwusds"
"\0""vpdpbsuds"
- "\0""vpdpwsuds"
"\0""vpdpbuuds"
- "\0""vpdpwuuds"
"\0""les"
"\0""xsaves"
"\0""lfs"
projects / binutils-gdb.git / commitdiff