--- /dev/null
+# Copyright (C) 1995 Free Software Foundation, Inc.
+
+# This program is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; either version 2 of the License, or
+# (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. */
+
+# Please email any bugs, comments, and/or additions to this file to:
+# bug-gdb@prep.ai.mit.edu
+
+# This file tests various Chill values, expressions, and types.
+
+# This file was written by Wilfried Moser (moser@aut.alcatel.at)
+# Kurt Fuchs (fuchs_k@aut.alcatel.at)
+#
+
+if $tracelevel then {
+ strace $tracelevel
+}
+
+if [skip_chill_tests] then { continue }
+
+set testfile "gch922"
+set srcfile ${srcdir}/$subdir/${testfile}.ch
+set binfile ${objdir}/${subdir}/${testfile}.exe
+if { [compile "${srcfile} -g -w -o ${binfile} ${CHILL_RT0} ${CHILL_LIB}"] != "" } {
+ perror "Couldn't compile ${srcfile}"
+ return -1
+}
+
+# Set the current language to chill. This counts as a test. If it
+# fails, then we skip the other tests.
+
+proc set_lang_chill {} {
+ global prompt
+ global binfile objdir subdir
+
+ verbose "loading file '$binfile'"
+ gdb_load $binfile
+ send "set language chill\n"
+ expect {
+ -re ".*$prompt $" {}
+ timeout { fail "set language chill (timeout)" ; return 0 }
+ }
+
+ send "show language\n"
+ expect {
+ -re ".* source language is \"chill\".*$prompt $" {
+ pass "set language to \"chill\""
+ send "break xx_\n"
+ expect {
+ -re ".*$prompt $" {
+ send "run\n"
+ expect -re ".*$prompt $" {}
+ return 1
+ }
+ timeout {
+ fail "can't set breakpoint (timeout)"
+ return 0
+ }
+ }
+ }
+ -re ".*$prompt $" {
+ fail "setting language to \"chill\""
+ return 0
+ }
+ timeout {
+ fail "can't show language (timeout)"
+ return 0
+ }
+ }
+}
+
+# Testing printing of a specific value. Increment passcount for
+# success or issue fail message for failure. In both cases, return
+# a 1 to indicate that more tests can proceed. However a timeout
+# is a serious error, generates a special fail message, and causes
+# a 0 to be returned to indicate that more tests are likely to fail
+# as well.
+#
+# Args are:
+#
+# First one is string to send to gdb
+# Second one is string to match gdb result to
+# Third one is an optional message to be printed
+
+proc test_print_accept { args } {
+ global prompt
+ global passcount
+ global verbose
+
+ if [llength $args]==3 then {
+ set message [lindex $args 2]
+ } else {
+ set message [lindex $args 0]
+ }
+ set sendthis [lindex $args 0]
+ set expectthis [lindex $args 1]
+ set result [gdb_test $sendthis ".* = ${expectthis}" $message]
+ if $result==0 {incr passcount}
+ return $result
+}
+
+
+proc test_chars {} {
+ global passcount prompt
+
+ verbose "Testing Chars"
+ set passcount 0
+
+ test_print_accept "print a" {'\^\(0\)'<repeats 70 times>//"Jason""\^\(0,5\)""Hugo\^\(10\)"//'\^\(1\)'<repeats 70 times>}
+ test_print_accept "print b" {"Jason""\^\(0,5\)""Hugo\^\(10\)"}
+ test_print_accept "print c" {'a'<repeats 70 times>//"\^\(0,5\)Jason"//'b'<repeats 70 times>}
+ test_print_accept "print d" {'\^\(11\)'}
+
+ send "set var a := (100)'\^(0,255)'\n" ; expect -re "$prompt $"
+ test_print_accept "print a" {"\^\(0,255,0,255,0,255,0,255,0,255,0,255,0,255,0,255,0,255,0,255,0,255,0,255,0,255,0,255,0,255,0,255,0,255,0,255,0,255,0,255,0,255,0,255,0,255,0,255,0,255,0,255,0,255,0,255,0,255,0,255,0,255,0,255,0,255,0,255,0,255,0,255,0,255,0,255,0,255,0,255,0,255,0,255,0,255,0,255,0,255,0,255,0,255,0,255,0,255,0,255,0,255,0,255,0,255,0,255,0,255,0,255,0,255,0,255,0,255,0,255,0,255,0,255,0,255,0,255,0,255,0,255,0,255,0,255,0,255,0,255,0,255,0,255,0,255,0,255,0,255,0,255,0,255,0,255,0,255,0,255,0,255,0,255,0,255,0,255,0,255,0,255,0,255,0,255,0,255,0,255,0,255,0,255,0,255,0,255,0,255,0,255,0,255,0,255,0,255,0,255\)"}
+
+ send "set var a := (10)'\^(1)'//(26)\"\^(66,67)\"//\" \"//'I'//' '//'a'//'m'//\" Hugo\" \n" ; expect -re "$prompt $"
+ test_print_accept "print a" {"\^\(1,1,1,1,1,1,1,1,1,1\)BCBCBCBCBCBCBCBCBCBCBCBCBCBCBCBCBCBCBCBCBCBCBCBCBCBC I am Hugo"}
+ send "set var b := \"Hugo \"\"\^(3,4)\"\"Otto\^(17)\" \n" ; expect -re "$prompt $"
+ test_print_accept "print b" {"Hugo ""\^\(3,4\)""Otto\^\(17\)"}
+ send "set var c := (70)'b' // \"\^(2,3)Hugo \" // (70)'c' \n" ; expect -re "$prompt $"
+ test_print_accept "print c" {'b'<repeats 70 times>//"\^\(2,3\)Hugo "//'c'<repeats 70 times>}
+ send "set var d := '\^(199)'\n" ; expect -re "$prompt $"
+ test_print_accept "print d" {'\^\(199\)'}
+
+ test_print_accept "print (10)'\^(0)'//(26)\"\^(66,67)\"//\" \"//'I'//' '//'a'//'m'//\" Hugo\"" {"\^\(0,0,0,0,0,0,0,0,0,0\)BCBCBCBCBCBCBCBCBCBCBCBCBCBCBCBCBCBCBCBCBCBCBCBCBCBC I am Hugo"}
+ test_print_accept "print \"Jason\"\"\^(0,5)\"\"Hugo\^(10)\"" {"Jason""\^\(0,5\)""Hugo\^\(10\)"}
+
+ send "set var a := \"\" \n" ; expect -re "$prompt $"
+ test_print_accept "print a" {""}
+ send "set var a := \"\"\"\" \n" ; expect -re "$prompt $"
+ test_print_accept "print a" {""""}
+ send "set var a := \" \"\"\" \n" ; expect -re "$prompt $"
+ test_print_accept "print a" {" """}
+ send "set var a := \"\^\^\" \n" ; expect -re "$prompt $"
+ test_print_accept "print a" {"\^\^"}
+ send "set var a := \"'\" \n" ; expect -re "$prompt $"
+ test_print_accept "print a" {"'"}
+}
+
+
+proc test_code {} {
+ global passcount prompt
+
+ verbose "Testing Chars"
+ set passcount 0
+
+ runto bulk
+ test_print_accept "print a" {"\^\(255,0,222,127,255,0,222,127,255,0,222,127,255,0,222,127,255,0,222,127,255,0,222,127,255,0,222,127,255,0,222,127,255,0,222,127,255,0,222,127,255,0,222,127,255,0,222,127,255,0,222,127,255,0,222,127,255,0,222,127,255,0,222,127,255,0,222,127,255,0,222,127,255,0,222,127,255,0,222,127,255,0,222,127,255,0,222,127,255,0,222,127,255,0,222,127,255,0,222,127,255,0,222,127,255,0,222,127,255,0,222,127,255,0,222,127,255,0,222,127,255,0,222,127,255,0,222,127,255,0,222,127,255,0,222,127,255,0,222,127,255,0,222,127,255,0,222,127,255,0,222,127,255,0,222,127,255,0,222,127,255,0,222,127,255,0,222,127,255,0,222,127,255,0,222,127,255,0,222,127,255,0,222,127,255,0,222,127,255,0,222,127,255,0,222,127,255,0,222,127\)"}
+ test_print_accept "print b" {"\^\(200\)"}
+# test_print_accept "print c" {'a'<repeats 70 times>//"\^\(0,5\)Jason"//'b'<repeats 70 times>}
+ test_print_accept "print d" {'a'}
+}
+
+
+# Start with a fresh gdb.
+
+gdb_exit
+gdb_start
+gdb_reinitialize_dir $srcdir/$subdir
+
+send "set print sevenbit-strings\n" ; expect -re ".*$prompt $"
+
+
+if [set_lang_chill] then {
+ # test builtins as described in chapter 6.20.3 Z.200
+
+ test_chars
+# test_code
+} else {
+ warning "$test_name tests suppressed."
+}
--- /dev/null
+# Copyright (C) 1995 Free Software Foundation, Inc.
+
+# This program is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; either version 2 of the License, or
+# (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. */
+
+# Please email any bugs, comments, and/or additions to this file to:
+# bug-gdb@prep.ai.mit.edu
+
+# This file tests various Chill values, expressions, and types.
+
+if $tracelevel then {
+ strace $tracelevel
+}
+
+if [skip_chill_tests] then { continue }
+
+set testfile "powerset"
+set srcfile ${srcdir}/$subdir/${testfile}.ch
+set binfile ${objdir}/${subdir}/${testfile}.exe
+if { [compile "${srcfile} -g -w -o ${binfile} ${CHILL_RT0} ${CHILL_LIB}"] != "" } {
+ perror "Couldn't compile ${srcfile}"
+ return -1
+}
+
+# Set the current language to chill. This counts as a test. If it
+# fails, then we skip the other tests.
+
+proc set_lang_chill {} {
+ global prompt
+ global binfile objdir subdir
+
+ verbose "loading file '$binfile'"
+ gdb_load $binfile
+ send "set language chill\n"
+ expect {
+ -re ".*$prompt $" {}
+ timeout { fail "set language chill (timeout)" ; return 0 }
+ }
+
+ send "show language\n"
+ expect {
+ -re ".* source language is \"chill\".*$prompt $" {
+ pass "set language to \"chill\""
+ send "break xx_\n"
+ expect {
+ -re ".*$prompt $" {
+ send "run\n"
+ expect -re ".*$prompt $" {}
+ return 1
+ }
+ timeout {
+ fail "can't set breakpoint (timeout)"
+ return 0
+ }
+ }
+ }
+ -re ".*$prompt $" {
+ fail "setting language to \"chill\""
+ return 0
+ }
+ timeout {
+ fail "can't show language (timeout)"
+ return 0
+ }
+ }
+}
+
+# Testing printing of a specific value. Increment passcount for
+# success or issue fail message for failure. In both cases, return
+# a 1 to indicate that more tests can proceed. However a timeout
+# is a serious error, generates a special fail message, and causes
+# a 0 to be returned to indicate that more tests are likely to fail
+# as well.
+#
+# Args are:
+#
+# First one is string to send to gdb
+# Second one is string to match gdb result to
+# Third one is an optional message to be printed
+
+proc test_print_accept { args } {
+ global prompt
+ global passcount
+ global verbose
+
+ if [llength $args]==3 then {
+ set message [lindex $args 2]
+ } else {
+ set message [lindex $args 0]
+ }
+ set sendthis [lindex $args 0]
+ set expectthis [lindex $args 1]
+ set result [gdb_test $sendthis ".* = ${expectthis}" $message]
+ if $result==0 {incr passcount}
+ return $result
+}
+
+proc test_card {} {
+ global passcount
+
+ verbose "testing builtin CARD"
+ set passcount 0
+
+ # discrete mode names
+ test_print_accept "print card(v_ps1)" "4"
+ test_print_accept "print card(v_ps2)" "15"
+ test_print_accept "print card(v_ps3)" "4"
+ test_print_accept "print card(v_ps4)" "11"
+ test_print_accept "print card(v_ps5)" "1"
+ test_print_accept "print card(v_ps51)" "0"
+ test_print_accept "print card(v_ps6)" "101"
+
+ # a failure
+ setup_xfail "*-*-*"
+ test_print_accept "print card(m_ps1)" "typename in invalid context"
+}
+
+proc test_min {} {
+ global passcount
+
+ verbose "testing builtin MIN"
+ set passcount 0
+
+ # discrete mode names
+ test_print_accept "print min(v_ps1)" "1"
+ test_print_accept "print min(v_ps2)" "-100"
+ test_print_accept "print min(v_ps3)" "bb"
+ test_print_accept "print min(v_ps4)" "','"
+ test_print_accept "print min(v_ps5)" "FALSE"
+ test_print_accept "print min(v_ps6)" "-50"
+
+ # a failure
+ setup_xfail "*-*-*"
+ test_print_accept "print min(v_ps51)" "MIN for empty powerset"
+ setup_xfail "*-*-*"
+ test_print_accept "print min(m_ps1)" "typename in invalid context"
+}
+
+proc test_max {} {
+ global passcount
+
+ verbose "testing builtin MIN"
+ set passcount 0
+
+ # discrete mode names
+ test_print_accept "print max(v_ps1)" "7"
+ test_print_accept "print max(v_ps2)" "100"
+ test_print_accept "print max(v_ps3)" "ii"
+ test_print_accept "print max(v_ps4)" "'z'"
+ test_print_accept "print max(v_ps5)" "FALSE"
+ test_print_accept "print max(v_ps6)" "50"
+
+ # a failure
+ setup_xfail "*-*-*"
+ test_print_accept "print max(v_ps51)" "MAX for empty powerset"
+}
+
+# Start with a fresh gdb.
+
+gdb_exit
+gdb_start
+gdb_reinitialize_dir $srcdir/$subdir
+
+send "set print sevenbit-strings\n" ; expect -re ".*$prompt $"
+
+if [set_lang_chill] then {
+ # test builtins as described in chapter 6.20.3 Z.200
+ test_card
+ test_min
+ test_max
+} else {
+ warning "$test_name tests suppressed."
+}
projects / binutils-gdb.git / commitdiff