(no commit message)

diff --git a/openpower/sv/setvl.mdwn b/openpower/sv/setvl.mdwn
index 150d587745e544e3a83572c0bae330faa8fe2297..384d2c0d7dd9ed95d2f47a2dc0a170c08817869c 100644 (file)
--- a/openpower/sv/setvl.mdwn
+++ b/openpower/sv/setvl.mdwn
@@ -79,9 +79,9 @@ using EXT22 temporarily and fitting into the
 
 Form: SVL-Form (see [[isatables/fields.text]])
 
-| 0.5|6.10|11.15|16..21| 22...25    | 26.30 |31|  name   |
+| 0.5|6.10|11.15|16..22| 23...25    | 26.30 |31|  name   |
 | -- | -- | --- | ---- |----------- | ----- |--| ------- |
-|OPCD| RT | RA  | SVi  |cv ms vs vf | 11011 |Rc| setvl   |
+|OPCD| RT | RA  | SVi  |   ms vs vf | 11011 |Rc| setvl   |
 
 Instruction format:
 
@@ -90,7 +90,6 @@ Instruction format:
 
 Note that the immediate (`SVi`) spans 7 bits (16 to 22)
 
-* `cv` - bit 22 - reads CTR instead of RA 
 * `ms` - bit 23 - allows for setting of MVL.
 * `vs` - bit 24 - allows for setting of VL.
 * `vf` - bit 25 - sets "Vertical First Mode".
@@ -194,7 +193,6 @@ is `UNDEFINED`.
     // instruction fields:
     rd = get_rt_field();         // bits 6..10
     ra = get_ra_field();         // bits 11..15
-    vc = get_vc_field();         // bit 22
     vf = get_vf_field();         // bit 23
     vs = get_vs_field();         // bit 24
     ms = get_ms_field();         // bit 25
@@ -232,9 +230,7 @@ is `UNDEFINED`.
         // 4 options: from SPR, from immed, from ra, from CTR
         if vs {
            // VL to be sourced from fields/regs
-           if vc {
-               VL = CTR
-           } else if ra != 0 {
+           if ra != 0 {
                VL = GPR[ra]
            } else {
                VL = vlimmed
@@ -306,55 +302,3 @@ loop:
     end:
       blr
 
-## setmvlhi double loop
-
-Two elements per inner loop are executed per instruction. This assumes
-that underlying hardware, when `setmvlhi` requests a parallelism hint of 2
-actually sets a parallelism hint of 2.
-
-This example, in c, would be:
-
-```
-long *r4;
-for (i=0; i < CTR; i++)
-{
-    r4[i+2] += r4[i]
-}
-```
-
-where, clearly, it is not possible to do more
-than 2 elements in parallel at a time: attempting
-to do so would result in data corruption. The compiler
-may be able to determine memory aliases and inform
-hardware at runtime of the maximum safe parallelism
-limit.
-
-Whilst this example could be simplified to simply set VL=2,
-or exploit the fact that overlapping adds have well-defined
-behaviour, this has not been done, here, for illustrative purposes
-in order to demonstrate setmvhli and Vertical-First Mode.
-
-Note, crucially, how r4, r32 and r20 are **NOT** incremented
-inside the inner loop.  The MAXVL reservation is still 8,
-i.e. as srcstep and dststep advance (by 2 elements at a time)
-registers r20-r27 will be used for the first LD, and
-registers r32-39 for the second LD.  `r4+srcstep*8` will be used
-as the elstrided offset for LDs.
-
-```
-   setmvlhi  8, 2 # MVL=8, VFHint=2
-loop:
-    setvl  r1, CTR, vf=1 # VL=r1=MAX(MVL, CTR), VF=1
-    mulli  r1, r1, 8     # multiply by int width
-loopinner:
-    sv.ld r20.v, r4(0) # load VLhint elements (max 2)
-    addi r2, r4, 16    # 2 elements ahead
-    sv.ld r32.v, r2(0) # load VLhint elements (max 2)
-    sv.add r32.v, r20.v, r32.v # x[i+2] += x[i]
-    sv.st r32.v, r2(0) # store VLhint elements
-    svstep.            # srcstep += VLhint
-    bnz loopinner      # repeat until srcstep=VL
-    # now done VL elements, move to next batch
-    add r4, r4, r1     # move r4 pointer forward
-    sv.bnz/ctr loop    # decrement CTR by VL
-```